diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/README.md b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/README.md new file mode 100644 index 0000000..149025f --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/README.md @@ -0,0 +1,24 @@ +# The Experiment Remake Pepperbox + +#### Author +RollaTroll + +#### Description +This a Pepperbox version of the Experiment Remake. + +#### Instructions +It's assembled in much the same way. However, you WILL have to print the parts for the Pepperbox. The only differences between the Assembly methods are on the Barrels part. + +Do not put the Barrel and Barrel Shaft on until you have both the Front Block and Trigger Guard on. Once ready, you should put glue in the appropriate hole in the Front Block, then drop the Barrel into place and fit the Barrel Shaft in through the front hole of the Trigger Guard and fit it into the glued hole of the Front Block. Make sure the end with a hole is not the end that goes into the Front Block! + +You may then put glue in the hole for the nut, this should be in the end of the Barrel Shaft. Make sure it is FULLY dry before you put the Barrel Shaft Cap on. You could also glue that in too, if you wanted. You may then screw the two pieces together until the Barrel will still turn properly. + +The Lock should be glued into the Front Block so that it will fit into the Barrel and keep it from turning without effort. + +Once ALL glue is FULLY dried, you may try shooting it from a distance, e.g. clamp and string. + +#### DISCLAIMER +I take no responsibility of any kind for any legal issues, damage, injury or death that may occur due to use of or production of this design. It is untested and is by NO means guaranteed to function. Use common sense and be careful. + +#### NOTES +Looking back several months after designing it, I now realize that many major parts would be near impossible to print (Body, Hammer Slide, Front Block, Trigger Guard, etc.). I may fix some of these problems at some point, but it may be awhile. diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/1.jpg b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/1.jpg new file mode 100644 index 0000000..7ca2a8d Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/1.jpg differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/2.jpg b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/2.jpg new file mode 100644 index 0000000..474e212 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/2.jpg differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/3.jpg b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/3.jpg new file mode 100644 index 0000000..46d83ad Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/3.jpg differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/4.jpg b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/4.jpg new file mode 100644 index 0000000..7b88289 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/Renders/4.jpg differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Assembly.sldasm b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Assembly.sldasm new file mode 100644 index 0000000..16f8d22 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Assembly.sldasm differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Barrel.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Barrel.sldprt new file mode 100644 index 0000000..adb93bb Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Barrel.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Barrel_Shaft.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Barrel_Shaft.sldprt new file mode 100644 index 0000000..75bed9f Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Barrel_Shaft.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Barrel_Shaft_Cap.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Barrel_Shaft_Cap.sldprt new file mode 100644 index 0000000..dd12626 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Barrel_Shaft_Cap.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Body.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Body.sldprt new file mode 100644 index 0000000..afe4449 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Body.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Front_Block.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Front_Block.sldprt new file mode 100644 index 0000000..26d13c6 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Front_Block.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Grip.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Grip.sldprt new file mode 100644 index 0000000..9f459fe Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Grip.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Hammer_Slide.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Hammer_Slide.sldprt new file mode 100644 index 0000000..422bb5b Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Hammer_Slide.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Lock.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Lock.sldprt new file mode 100644 index 0000000..3a5d844 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Lock.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Long_Hammer_Slide_Pin.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Long_Hammer_Slide_Pin.sldprt new file mode 100644 index 0000000..c95beec Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Long_Hammer_Slide_Pin.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/M2_Nut.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/M2_Nut.sldprt new file mode 100644 index 0000000..94b71dc Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/M2_Nut.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/M2_Screw.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/M2_Screw.sldprt new file mode 100644 index 0000000..be9fce1 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/M2_Screw.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Short_Hammer_Slide_Pin.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Short_Hammer_Slide_Pin.sldprt new file mode 100644 index 0000000..aaa4d48 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Short_Hammer_Slide_Pin.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Thumb_Tack_Pin_Filled.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Thumb_Tack_Pin_Filled.sldprt new file mode 100644 index 0000000..c68f0d9 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Thumb_Tack_Pin_Filled.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Thumbs.db b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Thumbs.db new file mode 100644 index 0000000..436a80c Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Thumbs.db differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger.sldprt new file mode 100644 index 0000000..ec710ac Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Guard.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Guard.sldprt new file mode 100644 index 0000000..bf420c9 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Guard.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Guide.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Guide.sldprt new file mode 100644 index 0000000..e0f1394 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Guide.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Spring.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Spring.sldprt new file mode 100644 index 0000000..a11943b Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Spring.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Spring_Cap.sldprt b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Spring_Cap.sldprt new file mode 100644 index 0000000..dbf958d Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/SLDPRT/Trigger_Spring_Cap.sldprt differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Barrel.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Barrel.step new file mode 100644 index 0000000..b7333fd --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Barrel.step @@ -0,0 +1,3310 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Barrel.STEP', + '2013-11-14T05:10:01', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 30.00000000000000000 ) ) ; +#3 = VERTEX_POINT ( 'NONE', #1778 ) ; +#4 = EDGE_CURVE ( 'NONE', #1418, #1391, #1708, .T. ) ; +#5 = DIRECTION ( 'NONE', ( -0.8440137863433202500, -0.5363214786510159800, 0.0000000000000000000 ) ) ; +#6 = VERTEX_POINT ( 'NONE', #1800 ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( -20.44003142540162800, -15.30100000000007700, 37.38882461611265000 ) ) ; +#8 = AXIS2_PLACEMENT_3D ( 'NONE', #1644, #434, #1885 ) ; +#9 = VECTOR ( 'NONE', #397, 1000.000000000000000 ) ; +#10 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11 = ORIENTED_EDGE ( 'NONE', *, *, #533, .T. ) ; +#12 = EDGE_CURVE ( 'NONE', #111, #2672, #2121, .T. ) ; +#13 = LINE ( 'NONE', #181, #9 ) ; +#14 = LINE ( 'NONE', #2615, #1060 ) ; +#15 = ORIENTED_EDGE ( 'NONE', *, *, #2251, .T. ) ; +#16 = VECTOR ( 'NONE', #1009, 1000.000000000000000 ) ; +#17 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 7.485871273641538300, 0.3932795511003563400, 39.90126456779089600 ) ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( 4.608762523184965200, -39.08353450425793300, 37.50000000000000000 ) ) ; +#20 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21 = EDGE_CURVE ( 'NONE', #33, #1105, #1675, .T. ) ; +#22 = EDGE_CURVE ( 'NONE', #2502, #2346, #1397, .T. ) ; +#23 = EDGE_CURVE ( 'NONE', #2223, #1777, #1867, .T. ) ; +#24 = CARTESIAN_POINT ( 'NONE', ( -6.694717353275218700, -44.25410196865986000, 39.56051128339901600 ) ) ; +#25 = DIRECTION ( 'NONE', ( -0.5363214786510097600, -0.8440137863433241300, 0.0000000000000000000 ) ) ; +#26 = AXIS2_PLACEMENT_3D ( 'NONE', #456, #1914, #658 ) ; +#27 = ORIENTED_EDGE ( 'NONE', *, *, #1258, .T. ) ; +#28 = DIRECTION ( 'NONE', ( -0.8440137863433223600, 0.5363214786510126500, -7.932167803103528300E-017 ) ) ; +#29 = ADVANCED_FACE ( 'NONE', ( #1670 ), #569, .T. ) ; +#30 = ORIENTED_EDGE ( 'NONE', *, *, #119, .T. ) ; +#31 = EDGE_LOOP ( 'NONE', ( #639, #2007, #1177, #2640 ) ) ; +#32 = EDGE_CURVE ( 'NONE', #539, #2609, #1647, .T. ) ; +#33 = VERTEX_POINT ( 'NONE', #1448 ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, -40.00000000000000000, 0.0000000000000000000 ) ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( 0.8411768605095005800, -55.07059174458554200, 2.004706116305717600 ) ) ; +#36 = AXIS2_PLACEMENT_3D ( 'NONE', #2283, #953, #2542 ) ; +#37 = CARTESIAN_POINT ( 'NONE', ( -4.564415655001037700, -41.15572075692536900, 37.28105663171557200 ) ) ; +#38 = VERTEX_POINT ( 'NONE', #1437 ) ; +#39 = EDGE_CURVE ( 'NONE', #111, #2058, #1617, .T. ) ; +#40 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel', ( #2650, #1882 ), #1934 ) ; +#41 = VECTOR ( 'NONE', #1038, 999.9999999999998900 ) ; +#42 = ORIENTED_EDGE ( 'NONE', *, *, #2871, .T. ) ; +#43 = LINE ( 'NONE', #1830, #16 ) ; +#44 = CYLINDRICAL_SURFACE ( 'NONE', #2658, 4.698999999999998100 ) ; +#45 = ORIENTED_EDGE ( 'NONE', *, *, #32, .T. ) ; +#46 = CARTESIAN_POINT ( 'NONE', ( -18.59594911601467600, -27.06075365065102600, 37.50000000000000000 ) ) ; +#47 = EDGE_CURVE ( 'NONE', #2064, #1705, #1640, .T. ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( 21.39265834089581700, -12.46638267860155700, 39.79162264665473700 ) ) ; +#49 = CARTESIAN_POINT ( 'NONE', ( 7.533665832986455900, 1.390407666704020400, 39.79188446163864500 ) ) ; +#50 = AXIS2_PLACEMENT_3D ( 'NONE', #893, #2739, #1957 ) ; +#51 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52 = EDGE_CURVE ( 'NONE', #235, #1061, #1611, .T. ) ; +#53 = EDGE_CURVE ( 'NONE', #239, #1098, #2040, .T. ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( -7.530771205406569600, 0.9755674660811581900, 39.83962769998238700 ) ) ; +#55 = ADVANCED_FACE ( 'NONE', ( #1673 ), #1579, .T. ) ; +#56 = CARTESIAN_POINT ( 'NONE', ( 22.52017462818109900, -16.03397921797251200, 37.17038346254926800 ) ) ; +#57 = EDGE_CURVE ( 'NONE', #2642, #2100, #911, .T. ) ; +#58 = ORIENTED_EDGE ( 'NONE', *, *, #327, .T. ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( 4.087339681246012500, 2.329254019462193300, 40.55200177145963600 ) ) ; +#60 = AXIS2_PLACEMENT_3D ( 'NONE', #2147, #842, #2408 ) ; +#61 = CLOSED_SHELL ( 'NONE', ( #1351, #55, #663, #2782, #2284, #2766, #1127, #161, #2498, #1156, #2025, #351, #1378, #126, #1742, #2422, #910, #586, #864, #84, #2694, #300, #1264, #1401, #146, #2557, #368, #542, #1726, #1528, #1544, #1171, #1668, #255, #2006, #888, #1936, #2680, #1601, #1068, #735, #696, #2263, #2441, #95, #1469, #1287, #766, #2522, #1200, #330, #2817, #2575, #1463, #1985, #1766, #452, #2203, #270, #570, #476, #942, #2802, #649, #29, #1967, #114, #315, #927, #237, #2298, #1801, #1911, #1278, #2176, #1310, #1695, #962, #2340, #1101 ) ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( -4.608762523184973100, -39.08353450425796900, 37.50000000000000000 ) ) ; +#63 = EDGE_LOOP ( 'NONE', ( #2666, #706, #1430, #229 ) ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( -7.435260213179880400, -42.44317317252397700, 39.66920672263845700 ) ) ; +#65 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66 = VERTEX_POINT ( 'NONE', #1190 ) ; +#67 = ORIENTED_EDGE ( 'NONE', *, *, #39, .T. ) ; +#68 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70 = AXIS2_PLACEMENT_3D ( 'NONE', #1408, #176, #1596 ) ; +#71 = CIRCLE ( 'NONE', #394, 50.00000000000000000 ) ; +#72 = ORIENTED_EDGE ( 'NONE', *, *, #2871, .F. ) ; +#73 = VECTOR ( 'NONE', #2326, 1000.000000000000000 ) ; +#74 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 21.95473585451339800, -12.49096199613388700, 39.72655827562584800 ) ) ; +#76 = CYLINDRICAL_SURFACE ( 'NONE', #2879, 4.953000000000000300 ) ; +#77 = ORIENTED_EDGE ( 'NONE', *, *, #2285, .T. ) ; +#78 = FACE_OUTER_BOUND ( 'NONE', #493, .T. ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 0.0000000000000000000 ) ) ; +#80 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 34.79019945774901100, -17.49999999999963800, 0.0000000000000000000 ) ) ; +#82 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231582800, -74.86089611231602700, 30.00000000000000000 ) ) ; +#84 = ADVANCED_FACE ( 'NONE', ( #1575 ), #1513, .T. ) ; +#85 = DIRECTION ( 'NONE', ( -0.1950341552973091100, 0.9807964509863731400, 0.0000000000000000000 ) ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( -20.98032425597106300, -12.45504097983531900, 39.83936141413544600 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 0.0000000000000000000 ) ) ; +#88 = ORIENTED_EDGE ( 'NONE', *, *, #21, .F. ) ; +#89 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 9.999999999999998200, 0.0000000000000000000 ) ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 14.79019945774904000, 0.0000000000000000000 ) ) ; +#91 = CARTESIAN_POINT ( 'NONE', ( -20.26935444099845200, -15.30635466831811600, 37.40656527383677600 ) ) ; +#92 = ORIENTED_EDGE ( 'NONE', *, *, #481, .F. ) ; +#93 = AXIS2_PLACEMENT_3D ( 'NONE', #1304, #2473, #68 ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.27199999999999800 ) ) ; +#95 = ADVANCED_FACE ( 'NONE', ( #1542 ), #1577, .T. ) ; +#96 = ORIENTED_EDGE ( 'NONE', *, *, #924, .T. ) ; +#97 = EDGE_CURVE ( 'NONE', #1566, #1539, #1645, .T. ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999994700, -15.04699999999979300, 17.27199999999999800 ) ) ; +#99 = VERTEX_POINT ( 'NONE', #1064 ) ; +#100 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #929, 'distance_accuracy_value', 'NONE'); +#101 = CARTESIAN_POINT ( 'NONE', ( -19.99999999997951500, -24.69900000000007300, 37.43962887310161100 ) ) ; +#102 = CIRCLE ( 'NONE', #2663, 4.698999999999998100 ) ; +#103 = VERTEX_POINT ( 'NONE', #1046 ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( -23.45007313557665900, -12.86795364522634900, 39.58196787209192300 ) ) ; +#105 = VERTEX_POINT ( 'NONE', #1037 ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( -24.25410196865985300, -13.30528264672485000, 39.56051128339901600 ) ) ; +#107 = VERTEX_POINT ( 'NONE', #1054 ) ; +#108 = CYLINDRICAL_SURFACE ( 'NONE', #2671, 3.749999999999997800 ) ; +#109 = EDGE_CURVE ( 'NONE', #1605, #2513, #1540, .T. ) ; +#110 = CIRCLE ( 'NONE', #2893, 4.698999999999999800 ) ; +#111 = VERTEX_POINT ( 'NONE', #1018 ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -50.00000000000000000, 0.0000000000000000000 ) ) ; +#114 = ADVANCED_FACE ( 'NONE', ( #1487 ), #1998, .T. ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( -18.59594911601472600, -12.93924634934916000, 37.50000000000000000 ) ) ; +#116 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#117 = CIRCLE ( 'NONE', #2186, 4.952999999999999400 ) ; +#118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#119 = EDGE_CURVE ( 'NONE', #66, #111, #1511, .T. ) ; +#120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( -4.799000000000000400, -40.00000000000000000, 17.27199999999999800 ) ) ; +#122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#123 = AXIS2_PLACEMENT_3D ( 'NONE', #1372, #1371, #1363 ) ; +#124 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.491481338843133400E-015, 0.0000000000000000000 ) ) ; +#125 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#126 = ADVANCED_FACE ( 'NONE', ( #1484 ), #1459, .F. ) ; +#127 = ORIENTED_EDGE ( 'NONE', *, *, #2741, .F. ) ; +#128 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#129 = ORIENTED_EDGE ( 'NONE', *, *, #847, .T. ) ; +#130 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#131 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#132 = DIRECTION ( 'NONE', ( 0.8440137863433224700, -0.5363214786510124300, 1.098603226816039600E-015 ) ) ; +#133 = EDGE_LOOP ( 'NONE', ( #2357, #473, #2399, #2512 ) ) ; +#134 = ORIENTED_EDGE ( 'NONE', *, *, #485, .F. ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 9.999999999999998200, 3.000000000000000000 ) ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( 20.88450869725470200, -15.36409336194115500, 37.31637200411186900 ) ) ; +#137 = DIRECTION ( 'NONE', ( -0.1950341552972932900, -0.9807964509863763600, -1.767124896318465700E-015 ) ) ; +#138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#139 = VERTEX_POINT ( 'NONE', #646 ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005000, -24.69899999999979600, 37.43962887309924500 ) ) ; +#141 = EDGE_CURVE ( 'NONE', #2835, #139, #1842, .T. ) ; +#142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#143 = FACE_OUTER_BOUND ( 'NONE', #1285, .T. ) ; +#144 = ORIENTED_EDGE ( 'NONE', *, *, #1722, .F. ) ; +#145 = FACE_OUTER_BOUND ( 'NONE', #63, .T. ) ; +#146 = ADVANCED_FACE ( 'NONE', ( #2068 ), #1455, .T. ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#149 = FACE_OUTER_BOUND ( 'NONE', #133, .T. ) ; +#150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( -19.08353450425795500, -24.60876252318503900, 37.50000000000000000 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( -20.44003142538455000, -24.69900000000199100, 37.38882461611528600 ) ) ; +#153 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( 12.66020679514977200, 8.044822179765287000, 40.00000000000000000 ) ) ; +#155 = FACE_BOUND ( 'NONE', #2196, .T. ) ; +#156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -19.99999999999979400, 30.00000000000000000 ) ) ; +#158 = DIRECTION ( 'NONE', ( -1.033672213818910400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( -19.47030278354082000, -15.31432751302386200, 40.07774354325385200 ) ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( -20.35150738200070500, -24.69456643247303200, 40.22595147222624200 ) ) ; +#161 = ADVANCED_FACE ( 'NONE', ( #145 ), #1433, .F. ) ; +#162 = EDGE_CURVE ( 'NONE', #1248, #820, #2232, .T. ) ; +#163 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#164 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#165 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, -40.00000000000000000, 40.00100000000000500 ) ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 37.50000000000000000 ) ) ; +#168 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #601, #807, #2354 ), + ( #1013, #2617, #1217 ), + ( #2862, #1414, #191 ), + ( #1607, #405, #1846 ), + ( #614, #2106, #814 ), + ( #2367, #1022, #2626 ), + ( #1227, #2873, #1422 ), + ( #196, #1622, #413 ), + ( #1856, #621, #2120 ), + ( #824, #2379, #1034 ), + ( #2636, #1235, #2883 ), + ( #1432, #205, #2303 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.431146867680865900E-017, 0.001366589151724503500, 0.002049883727586748000, 0.002733178303448992700, 0.004099767455173482100, 0.005466356606897971500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865487900, 1.000000000000000000), + ( 1.000000000000000000, 0.6962804023095260400, 1.000000000000000000), + ( 1.000000000000000000, 0.6838643731091302900, 1.000000000000000000), + ( 1.000000000000000000, 0.6648240515470301700, 1.000000000000000000), + ( 1.000000000000000000, 0.6584081091808249300, 1.000000000000000000), + ( 1.000000000000000000, 0.6458021328468093200, 1.000000000000000000), + ( 1.000000000000000000, 0.6395921105353347100, 1.000000000000000000), + ( 1.000000000000000000, 0.6222527413818607100, 1.000000000000000000), + ( 1.000000000000000000, 0.6123144868094269100, 1.000000000000000000), + ( 1.000000000000000000, 0.5983896303522230300, 1.000000000000000000), + ( 1.000000000000000000, 0.5944228552562396100, 1.000000000000000000), + ( 1.000000000000000000, 0.5944745579080732400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#169 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001400, -15.30100000000006900, 37.43962887309924500 ) ) ; +#170 = ORIENTED_EDGE ( 'NONE', *, *, #1881, .T. ) ; +#171 = EDGE_CURVE ( 'NONE', #944, #2745, #1765, .T. ) ; +#172 = EDGE_CURVE ( 'NONE', #2543, #2223, #1461, .T. ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( -22.11668551954113200, -27.48832880803653500, 39.70776045654674400 ) ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( 4.699000000001913000, -40.44003142538453900, 37.38882461611527900 ) ) ; +#175 = EDGE_LOOP ( 'NONE', ( #1897, #2600, #2518, #2775 ) ) ; +#176 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#178 = ORIENTED_EDGE ( 'NONE', *, *, #2785, .T. ) ; +#179 = AXIS2_PLACEMENT_3D ( 'NONE', #634, #2142, #838 ) ; +#180 = ORIENTED_EDGE ( 'NONE', *, *, #2634, .F. ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999997200, -17.49999999999968700, 3.000000000000000000 ) ) ; +#182 = FACE_OUTER_BOUND ( 'NONE', #2429, .T. ) ; +#183 = ORIENTED_EDGE ( 'NONE', *, *, #1292, .F. ) ; +#184 = TOROIDAL_SURFACE ( 'NONE', #2864, 7.199000000000002500, 2.500000000000000000 ) ; +#185 = VERTEX_POINT ( 'NONE', #401 ) ; +#186 = TOROIDAL_SURFACE ( 'NONE', #2654, 4.799000000000000400, 0.1000000000000000100 ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( 18.59594911601470500, -27.06075365065075600, 40.00000000000000000 ) ) ; +#188 = FACE_OUTER_BOUND ( 'NONE', #2269, .T. ) ; +#189 = ORIENTED_EDGE ( 'NONE', *, *, #1857, .T. ) ; +#190 = EDGE_CURVE ( 'NONE', #988, #1391, #1407, .T. ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( 19.67597575816493100, -24.69719112580445500, 37.47639130574683700 ) ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 18.59594911601466900, -12.93924634934889900, 40.00000000000000000 ) ) ; +#193 = EDGE_CURVE ( 'NONE', #2751, #204, #1431, .T. ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999998200, -24.95300000000007000, 17.27199999999999800 ) ) ; +#195 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #151, #972, #2056 ), + ( #771, #2318, #984 ), + ( #2579, #1187, #2826 ), + ( #1386, #160, #1584 ), + ( #378, #1814, #580 ), + ( #2070, #781, #2330 ), + ( #997, #2592, #1194 ), + ( #2843, #1398, #173 ), + ( #1592, #391, #1826 ), + ( #591, #2086, #792 ), + ( #2344, #1006, #2607 ), + ( #1205, #2855, #1412 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03683585975729858400, 0.03820604089774279300, 0.03889113146796489800, 0.03957622203818700300, 0.04094640317863121300, 0.04231658431907542300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865487900, 1.000000000000000000), + ( 1.000000000000000000, 0.6962713838318409500, 1.000000000000000000), + ( 1.000000000000000000, 0.6838436495740096700, 1.000000000000000000), + ( 1.000000000000000000, 0.6647867734088229700, 1.000000000000000000), + ( 1.000000000000000000, 0.6583654817849948800, 1.000000000000000000), + ( 1.000000000000000000, 0.6457501437483099700, 1.000000000000000000), + ( 1.000000000000000000, 0.6395364128716840600, 1.000000000000000000), + ( 1.000000000000000000, 0.6221906439530274800, 1.000000000000000000), + ( 1.000000000000000000, 0.6122532625759111700, 1.000000000000000000), + ( 1.000000000000000000, 0.5983464453982687600, 1.000000000000000000), + ( 1.000000000000000000, 0.5944040879548924100, 1.000000000000000000), + ( 1.000000000000000000, 0.5944745579080748000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#196 = CARTESIAN_POINT ( 'NONE', ( 22.11394624125654600, -27.48868331394523800, 39.70807550649121300 ) ) ; +#197 = EDGE_CURVE ( 'NONE', #783, #2604, #1458, .T. ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( 20.56778971602663100, -15.33304044357420400, 37.36541199509918000 ) ) ; +#199 = ORIENTED_EDGE ( 'NONE', *, *, #2796, .T. ) ; +#200 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#201 = EDGE_LOOP ( 'NONE', ( #1499, #2637, #1170, #2159 ) ) ; +#202 = DIRECTION ( 'NONE', ( 0.9807964509863728000, 0.1950341552973107200, 0.0000000000000000000 ) ) ; +#203 = EDGE_CURVE ( 'NONE', #1212, #2267, #1400, .T. ) ; +#204 = VERTEX_POINT ( 'NONE', #112 ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 22.52017462818112700, -23.96602078202705100, 40.55200177161796700 ) ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.999999999999998200, 3.000000000000000000 ) ) ; +#207 = ORIENTED_EDGE ( 'NONE', *, *, #1687, .T. ) ; +#208 = EDGE_CURVE ( 'NONE', #2077, #1261, #1428, .T. ) ; +#209 = VERTEX_POINT ( 'NONE', #121 ) ; +#210 = AXIS2_PLACEMENT_3D ( 'NONE', #2454, #1090, #2711 ) ; +#211 = DIRECTION ( 'NONE', ( -0.8440137863433206900, -0.5363214786510154300, 7.796539029017059600E-016 ) ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 40.00100000000000500 ) ) ; +#213 = VERTEX_POINT ( 'NONE', #34 ) ; +#214 = FACE_BOUND ( 'NONE', #745, .T. ) ; +#215 = EDGE_CURVE ( 'NONE', #2100, #1693, #1302, .T. ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( 4.608762523184965200, -39.08353450425793300, 37.50000000000000000 ) ) ; +#217 = FACE_BOUND ( 'NONE', #2824, .T. ) ; +#218 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#219 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2530, #2004, #2781, #1345 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.403348247575207000, 1.738244406014585600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9906755314555129000, 0.9906755314555129000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#220 = AXIS2_PLACEMENT_3D ( 'NONE', #46, #1479, #248 ) ; +#221 = AXIS2_PLACEMENT_3D ( 'NONE', #2659, #1253, #5 ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( -4.608762523184972300, -39.08353450425796900, 37.50000000000000000 ) ) ; +#223 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#224 = AXIS2_PLACEMENT_3D ( 'NONE', #1438, #211, #1632 ) ; +#225 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#226 = EDGE_CURVE ( 'NONE', #2226, #1353, #1323, .T. ) ; +#227 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#228 = CARTESIAN_POINT ( 'NONE', ( 4.699784700602450000, 0.1209279264350889700, 37.42594842690225200 ) ) ; +#229 = ORIENTED_EDGE ( 'NONE', *, *, #215, .F. ) ; +#230 = ORIENTED_EDGE ( 'NONE', *, *, #2774, .T. ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( -24.25410196865983900, -26.69471735327530500, 39.56051128339901600 ) ) ; +#232 = VERTEX_POINT ( 'NONE', #2510 ) ; +#233 = ORIENTED_EDGE ( 'NONE', *, *, #2461, .T. ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 4.666959556425520200, -40.56778971602739900, 37.36541199509918000 ) ) ; +#235 = VERTEX_POINT ( 'NONE', #511 ) ; +#236 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2239, #2490, #1119, #2750, #1316, #86, #1516, #289, #1728, #508 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001488298111837645800, 0.002976596223675291600, 0.004464894335512937400, 0.005953192447350583200 ), + .UNSPECIFIED. ) ; +#237 = ADVANCED_FACE ( 'NONE', ( #2639 ), #427, .F. ) ; +#238 = FACE_OUTER_BOUND ( 'NONE', #497, .T. ) ; +#239 = VERTEX_POINT ( 'NONE', #635 ) ; +#240 = CIRCLE ( 'NONE', #2674, 4.953000000000000300 ) ; +#241 = CARTESIAN_POINT ( 'NONE', ( 7.435260213179868800, 2.443173172524014400, 39.66920672263845700 ) ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( 7.060753650650887000, -38.59594911601464400, 40.00000000000000000 ) ) ; +#243 = AXIS2_PLACEMENT_3D ( 'NONE', #1145, #2000, #948 ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( -4.401771557073984400, -41.68064936599024900, 40.46057594772485500 ) ) ; +#245 = AXIS2_PLACEMENT_3D ( 'NONE', #1047, #2128, #1252 ) ; +#246 = CARTESIAN_POINT ( 'NONE', ( -23.83583913405931700, -26.96049896199711400, 39.56051128339901600 ) ) ; +#247 = EDGE_CURVE ( 'NONE', #982, #2665, #1298, .T. ) ; +#248 = DIRECTION ( 'NONE', ( 0.1950341552973064400, -0.9807964509863736900, 0.0000000000000000000 ) ) ; +#249 = EDGE_LOOP ( 'NONE', ( #2834, #561, #2188, #144 ) ) ; +#250 = ORIENTED_EDGE ( 'NONE', *, *, #1040, .T. ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( 21.43284441538728300, -15.50585676335951900, 40.41392066168187100 ) ) ; +#252 = ORIENTED_EDGE ( 'NONE', *, *, #1083, .T. ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( 4.646542926175407700, 0.7158804160689311600, 37.34391334530541000 ) ) ; +#254 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -50.00000000000000000, 3.000000000000000000 ) ) ; +#255 = ADVANCED_FACE ( 'NONE', ( #1362 ), #1274, .T. ) ; +#256 = AXIS2_PLACEMENT_3D ( 'NONE', #453, #868, #1049 ) ; +#257 = ORIENTED_EDGE ( 'NONE', *, *, #2523, .T. ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( -23.37847930447408400, -27.16357872233465900, 39.58610306701164900 ) ) ; +#259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( -7.509038003865902600, 1.954735854513408400, 39.72655827562585500 ) ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( 24.25410196865981000, -13.30528264672454800, 39.56051128339901600 ) ) ; +#262 = FACE_BOUND ( 'NONE', #604, .T. ) ; +#263 = ORIENTED_EDGE ( 'NONE', *, *, #2457, .T. ) ; +#264 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #967, #2296, #1165, #2807, #1368, #136, #1557, #350 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0006738747560560207200, 0.001347749512112041400, 0.002695499024224073800 ), + .UNSPECIFIED. ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( 6.694717353275203600, 4.254101968659886900, 39.56051128339901600 ) ) ; +#266 = FACE_OUTER_BOUND ( 'NONE', #595, .T. ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( -4.685672486975775500, -39.47030278354004200, 40.07774354325237500 ) ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( -7.544959020164748500, -40.98032425597107000, 39.83936141413544600 ) ) ; +#270 = ADVANCED_FACE ( 'NONE', ( #1326 ), #1524, .T. ) ; +#271 = AXIS2_PLACEMENT_3D ( 'NONE', #898, #2483, #1111 ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, -40.00000000000000000, 17.37200000000000000 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 4.669697710915799300, -0.6100319083763665600, 37.50000000000000000 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 4.635906638055760500, 0.8845086972680970000, 37.31637200410990800 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( 23.37847930447406200, -12.83642127766519500, 39.58610306701165600 ) ) ; +#276 = CARTESIAN_POINT ( 'NONE', ( -12.66020679514980400, -48.04482217976524100, 0.0000000000000000000 ) ) ; +#277 = EDGE_LOOP ( 'NONE', ( #2596, #2632, #2699, #2740, #2780 ) ) ; +#278 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#279 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#280 = EDGE_LOOP ( 'NONE', ( #633, #683, #739, #779, #823, #843, #845, #850 ) ) ; +#281 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1100, #1297, #899, #2484 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002695499024224069900, 0.003629634443215535100 ), + .UNSPECIFIED. ) ; +#282 = ORIENTED_EDGE ( 'NONE', *, *, #510, .T. ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 5.754615309193413700E-016, 40.00100000000000500 ) ) ; +#284 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#285 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999998200, -24.69900000000006900, 17.37200000000000000 ) ) ; +#286 = EDGE_LOOP ( 'NONE', ( #2828, #1211, #2870, #27, #30, #67, #2790 ) ) ; +#287 = EDGE_CURVE ( 'NONE', #1566, #1900, #1250, .T. ) ; +#288 = EDGE_LOOP ( 'NONE', ( #441, #848 ) ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( -19.53516298299121000, -12.65292068955535500, 39.97459144026987600 ) ) ; +#290 = DIRECTION ( 'NONE', ( -3.469446951953614200E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#291 = EDGE_CURVE ( 'NONE', #600, #653, #1270, .T. ) ; +#292 = EDGE_CURVE ( 'NONE', #1261, #1173, #1273, .T. ) ; +#293 = ORIENTED_EDGE ( 'NONE', *, *, #1928, .F. ) ; +#294 = FACE_OUTER_BOUND ( 'NONE', #1244, .T. ) ; +#295 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 18.59594911601466200, -12.93924634934883000, 40.00000000000000000 ) ) ; +#297 = CIRCLE ( 'NONE', #26, 7.931999999999999500 ) ; +#298 = ORIENTED_EDGE ( 'NONE', *, *, #1118, .F. ) ; +#299 = VECTOR ( 'NONE', #1404, 1000.000000000000000 ) ; +#300 = ADVANCED_FACE ( 'NONE', ( #2559, #1246 ), #1646, .T. ) ; +#301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 7.467160357981674300, -40.24997846224721300, 39.91484582305716300 ) ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( -20.83854657404643600, -15.36553515442467500, 40.30864583454157200 ) ) ; +#304 = ORIENTED_EDGE ( 'NONE', *, *, #2236, .T. ) ; +#305 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#306 = EDGE_CURVE ( 'NONE', #937, #235, #1485, .T. ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( -22.43508501108106000, -27.43734614724285600, 39.66997855777503900 ) ) ; +#308 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( -4.608762523184972300, -39.08353450425796900, 37.50000000000000000 ) ) ; +#310 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( -21.99486412396591500, -15.73505607420042400, 37.18647590509636600 ) ) ; +#312 = AXIS2_PLACEMENT_3D ( 'NONE', #1519, #295, #1732 ) ; +#313 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 0.0000000000000000000 ) ) ; +#314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#315 = ADVANCED_FACE ( 'NONE', ( #1249 ), #1148, .F. ) ; +#316 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #894, #273, #1713, #491 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009204074736004262800 ), + .UNSPECIFIED. ) ; +#317 = EDGE_CURVE ( 'NONE', #2227, #33, #1174, .T. ) ; +#318 = CARTESIAN_POINT ( 'NONE', ( -21.95473585451342700, -27.50903800386596700, 39.72655827562586200 ) ) ; +#319 = DIRECTION ( 'NONE', ( 0.1950341552972980300, 0.9807964509863754700, 0.0000000000000000000 ) ) ; +#320 = ORIENTED_EDGE ( 'NONE', *, *, #1881, .F. ) ; +#321 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 4.799000000000000400, 5.877079989108149200E-016, 17.37200000000000000 ) ) ; +#323 = ORIENTED_EDGE ( 'NONE', *, *, #1889, .F. ) ; +#324 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1201, #1035, #424, #1868 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002695499024224015200, 0.003629634443215530800 ), + .UNSPECIFIED. ) ; +#325 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#326 = ORIENTED_EDGE ( 'NONE', *, *, #485, .T. ) ; +#327 = EDGE_CURVE ( 'NONE', #2051, #1508, #1218, .T. ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( -21.22155115697172400, -27.53571886088887800, 39.81142960067295200 ) ) ; +#329 = EDGE_LOOP ( 'NONE', ( #2641, #2681, #2744, #2752 ) ) ; +#330 = ADVANCED_FACE ( 'NONE', ( #1214 ), #1142, .T. ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( -20.97556746608117000, -27.53077120540663400, 39.83962769998237300 ) ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 39.56051128339900900 ) ) ; +#333 = ORIENTED_EDGE ( 'NONE', *, *, #1734, .T. ) ; +#334 = VECTOR ( 'NONE', #1462, 1000.000000000000000 ) ; +#335 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#336 = ORIENTED_EDGE ( 'NONE', *, *, #2457, .F. ) ; +#337 = CIRCLE ( 'NONE', #2706, 4.952999999999999400 ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 14.79019945774904000, 3.000000000000002700 ) ) ; +#339 = EDGE_CURVE ( 'NONE', #1105, #2051, #1441, .T. ) ; +#340 = EDGE_CURVE ( 'NONE', #209, #2267, #1216, .T. ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, -39.99999999999999300, 37.43962887309924500 ) ) ; +#342 = LINE ( 'NONE', #1660, #334 ) ; +#343 = ORIENTED_EDGE ( 'NONE', *, *, #141, .T. ) ; +#344 = CARTESIAN_POINT ( 'NONE', ( -20.49051925126213200, -27.49645514950882900, 39.89124554043246500 ) ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( 22.52017462818112700, -23.96602078202705100, 37.17038346254926800 ) ) ; +#346 = CARTESIAN_POINT ( 'NONE', ( -20.24997846224724900, -27.46716035798173300, 39.91484582305717800 ) ) ; +#347 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#348 = AXIS2_PLACEMENT_3D ( 'NONE', #2, #1883, #227 ) ; +#349 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#350 = CARTESIAN_POINT ( 'NONE', ( 19.99999999997950100, -15.30099999999979200, 37.43962887310161100 ) ) ; +#351 = ADVANCED_FACE ( 'NONE', ( #1107 ), #1112, .T. ) ; +#352 = EDGE_CURVE ( 'NONE', #1143, #38, #1086, .T. ) ; +#353 = CARTESIAN_POINT ( 'NONE', ( 19.08353450425794800, -15.39123747681482400, 37.50000000000000000 ) ) ; +#354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( 34.79019945774901100, -17.49999999999964100, 3.000000000000018200 ) ) ; +#356 = CARTESIAN_POINT ( 'NONE', ( -18.59594911601467600, -27.06075365065102600, 40.00000000000000000 ) ) ; +#357 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#358 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, 0.0000000000000000000, 40.00100000000000500 ) ) ; +#359 = AXIS2_PLACEMENT_3D ( 'NONE', #1393, #371, #2585 ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.27199999999999800 ) ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 0.0000000000000000000 ) ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 0.0000000000000000000 ) ) ; +#363 = EDGE_LOOP ( 'NONE', ( #2353, #2271, #2191, #2393, #2469, #2555 ) ) ; +#364 = AXIS2_PLACEMENT_3D ( 'NONE', #2851, #1409, #808 ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( 21.51811602494495900, -24.45244550588568100, 37.23454346965972700 ) ) ; +#366 = EDGE_LOOP ( 'NONE', ( #516, #552, #598, #630 ) ) ; +#367 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#368 = ADVANCED_FACE ( 'NONE', ( #1109, #1078 ), #1222, .T. ) ; +#369 = AXIS2_PLACEMENT_3D ( 'NONE', #1255, #17, #1450 ) ; +#370 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 39.56051128339901600 ) ) ; +#371 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#372 = EDGE_LOOP ( 'NONE', ( #376, #407, #435, #458, #463, #490 ) ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 9.999999999999998200, 3.000000000000000000 ) ) ; +#374 = EDGE_CURVE ( 'NONE', #944, #1015, #803, .T. ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999998200, -24.69900000000006900, 40.00100000000000500 ) ) ; +#376 = ORIENTED_EDGE ( 'NONE', *, *, #203, .F. ) ; +#377 = CARTESIAN_POINT ( 'NONE', ( -19.63395680537247800, -12.62896605507106400, 39.96852174381988500 ) ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( -20.27034503219848800, -24.69359246489339900, 37.40643411029606100 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, -40.44003142540161400, 37.38882461611265000 ) ) ; +#380 = EDGE_LOOP ( 'NONE', ( #92, #134, #170, #199 ) ) ; +#381 = CARTESIAN_POINT ( 'NONE', ( 24.25410196865981400, -13.30528264672454800, 39.56051128339901600 ) ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 28.04482217976525500, -32.66020679514958400, 40.00000000000000000 ) ) ; +#383 = VECTOR ( 'NONE', #2673, 1000.000000000000000 ) ; +#384 = ORIENTED_EDGE ( 'NONE', *, *, #901, .T. ) ; +#385 = AXIS2_PLACEMENT_3D ( 'NONE', #996, #1192, #2840 ) ; +#386 = CIRCLE ( 'NONE', #2688, 4.698999999999999800 ) ; +#387 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#388 = LINE ( 'NONE', #432, #383 ) ; +#389 = ORIENTED_EDGE ( 'NONE', *, *, #1776, .F. ) ; +#390 = CYLINDRICAL_SURFACE ( 'NONE', #2731, 4.698999999999999800 ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( -21.68227820815664600, -24.40114073186325800, 40.46087376877262900 ) ) ; +#392 = EDGE_CURVE ( 'NONE', #2058, #976, #1058, .T. ) ; +#393 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.491481338843133400E-015, 0.0000000000000000000 ) ) ; +#394 = AXIS2_PLACEMENT_3D ( 'NONE', #1203, #2852, #1410 ) ; +#395 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#396 = CARTESIAN_POINT ( 'NONE', ( -19.53333314085832500, -27.34659730040258900, 39.97468994010726800 ) ) ; +#397 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.047444401652940000E-014, 0.0000000000000000000 ) ) ; +#398 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #1504, #2398 ) ; +#399 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 19.06215095579542100, -12.77703050375285600, 40.00000000000000000 ) ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( 4.799000000000000400, -40.00000000000000000, 17.27199999999999800 ) ) ; +#402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#403 = EDGE_LOOP ( 'NONE', ( #326, #11 ) ) ; +#404 = AXIS2_PLACEMENT_3D ( 'NONE', #360, #1805, #566 ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( 20.35051599700381800, -24.69462977104876000, 40.22578517840982900 ) ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( 19.47063019258129700, -15.31426240681301100, 40.07780935511237900 ) ) ; +#407 = ORIENTED_EDGE ( 'NONE', *, *, #1268, .T. ) ; +#408 = AXIS2_PLACEMENT_3D ( 'NONE', #2211, #890, #2466 ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 37.50000000000000000 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#411 = AXIS2_PLACEMENT_3D ( 'NONE', #2137, #670, #1684 ) ; +#412 = EDGE_LOOP ( 'NONE', ( #1976, #2024 ) ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( 21.15572075692617900, -24.56441565500067600, 37.28105663171557200 ) ) ; +#414 = ORIENTED_EDGE ( 'NONE', *, *, #1480, .F. ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( 21.14450687653329200, -12.46482632394576500, 39.82054932554407900 ) ) ; +#416 = VECTOR ( 'NONE', #2162, 1000.000000000000000 ) ; +#417 = ORIENTED_EDGE ( 'NONE', *, *, #2503, .F. ) ; +#418 = FACE_OUTER_BOUND ( 'NONE', #2029, .T. ) ; +#419 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 37.50000000000000000 ) ) ; +#420 = CIRCLE ( 'NONE', #423, 10.00000000000000000 ) ; +#421 = ORIENTED_EDGE ( 'NONE', *, *, #2118, .F. ) ; +#422 = AXIS2_PLACEMENT_3D ( 'NONE', #206, #648, #666 ) ; +#423 = AXIS2_PLACEMENT_3D ( 'NONE', #1269, #28, #1466 ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( 4.669697710914433300, -39.38996809161673700, 37.50000000000000000 ) ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00000000000000000 ) ) ; +#426 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.047444401652940000E-014, 0.0000000000000000000 ) ) ; +#427 = PLANE ( 'NONE', #422 ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( -22.33029440727583600, -15.91332142482974500, 37.17038346254926800 ) ) ; +#429 = EDGE_LOOP ( 'NONE', ( #1834, #531, #1908, #1939 ) ) ; +#430 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #1875 ) ; +#431 = EDGE_LOOP ( 'NONE', ( #2079, #2116 ) ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000700, -17.50000000000010700, 0.0000000000000000000 ) ) ; +#433 = EDGE_LOOP ( 'NONE', ( #257, #282 ) ) ; +#434 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#435 = ORIENTED_EDGE ( 'NONE', *, *, #1993, .T. ) ; +#436 = VERTEX_POINT ( 'NONE', #712 ) ; +#437 = AXIS2_PLACEMENT_3D ( 'NONE', #2424, #2183, #866 ) ; +#438 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( 12.66020679514977200, 8.044822179765287000, 30.00000000000000000 ) ) ; +#440 = LINE ( 'NONE', #1893, #416 ) ; +#441 = ORIENTED_EDGE ( 'NONE', *, *, #750, .T. ) ; +#442 = TOROIDAL_SURFACE ( 'NONE', #348, 4.999999999999999100, 10.00000000000000000 ) ; +#443 = CARTESIAN_POINT ( 'NONE', ( 4.679687655871007700, 0.5173987964956342500, 40.25375557149965300 ) ) ; +#444 = CYLINDRICAL_SURFACE ( 'NONE', #245, 50.00000000000000000 ) ; +#445 = ORIENTED_EDGE ( 'NONE', *, *, #2664, .T. ) ; +#446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#447 = CIRCLE ( 'NONE', #454, 4.698999999999999800 ) ; +#448 = EDGE_CURVE ( 'NONE', #1740, #554, #1056, .T. ) ; +#449 = EDGE_CURVE ( 'NONE', #653, #1212, #1395, .T. ) ; +#450 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #507, #921, #1521, #302, #1737, #513, #1988, #713, #2253, #930, #2517, #1134 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001458216824229724200, 0.002187325236344586200, 0.002916433648459448400, 0.004374650472689172400, 0.005832867296918896800 ), + .UNSPECIFIED. ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.37200000000000000 ) ) ; +#452 = ADVANCED_FACE ( 'NONE', ( #238 ), #1026, .T. ) ; +#453 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.00000000000000000, 0.0000000000000000000 ) ) ; +#454 = AXIS2_PLACEMENT_3D ( 'NONE', #451, #1899, #652 ) ; +#455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#456 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 39.56051128339900900 ) ) ; +#457 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#458 = ORIENTED_EDGE ( 'NONE', *, *, #1928, .T. ) ; +#459 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1014, #602, #192 ), + ( #1609, #406, #1847 ), + ( #616, #2108, #815 ), + ( #2368, #1024, #2627 ), + ( #1228, #2875, #1423 ), + ( #198, #1623, #415 ), + ( #702, #1284, #48 ), + ( #1482, #251, #1688 ), + ( #477, #1931, #678 ), + ( #2204, #881, #2460 ), + ( #1092, #2718, #1293 ), + ( #56, #1491, #261 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03683585975729861100, 0.03820604089774281400, 0.03889113146796491200, 0.03957622203818701700, 0.04094640317863122700, 0.04231658431907543000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865483500, 1.000000000000000000), + ( 1.000000000000000000, 0.6962713838317448100, 1.000000000000000000), + ( 1.000000000000000000, 0.6838436495741359000, 1.000000000000000000), + ( 1.000000000000000000, 0.6647867734087594700, 1.000000000000000000), + ( 1.000000000000000000, 0.6583654817850963500, 1.000000000000000000), + ( 1.000000000000000000, 0.6457501437482074900, 1.000000000000000000), + ( 1.000000000000000000, 0.6395364128716327600, 1.000000000000000000), + ( 1.000000000000000000, 0.6221906439531291700, 1.000000000000000000), + ( 1.000000000000000000, 0.6122532625756568200, 1.000000000000000000), + ( 1.000000000000000000, 0.5983464453985222200, 1.000000000000000000), + ( 1.000000000000000000, 0.5944040879547019000, 1.000000000000000000), + ( 1.000000000000000000, 0.5944745579080738000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#460 = ORIENTED_EDGE ( 'NONE', *, *, #700, .T. ) ; +#461 = AXIS2_PLACEMENT_3D ( 'NONE', #819, #438, #577 ) ; +#462 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#463 = ORIENTED_EDGE ( 'NONE', *, *, #1449, .T. ) ; +#464 = CARTESIAN_POINT ( 'NONE', ( -7.132046354775060800, -43.45007313557532300, 39.58196787209181600 ) ) ; +#465 = EDGE_CURVE ( 'NONE', #2185, #2105, #987, .T. ) ; +#466 = ORIENTED_EDGE ( 'NONE', *, *, #2164, .T. ) ; +#467 = ORIENTED_EDGE ( 'NONE', *, *, #2619, .F. ) ; +#468 = CIRCLE ( 'NONE', #60, 4.799000000000000400 ) ; +#469 = ORIENTED_EDGE ( 'NONE', *, *, #1548, .T. ) ; +#470 = FACE_OUTER_BOUND ( 'NONE', #679, .T. ) ; +#471 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, -2.045723378207577100E-011, 37.43962887310160400 ) ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000002800, -22.49999999999968700, 0.0000000000000000000 ) ) ; +#473 = ORIENTED_EDGE ( 'NONE', *, *, #1292, .T. ) ; +#474 = EDGE_CURVE ( 'NONE', #1105, #2543, #990, .T. ) ; +#475 = ORIENTED_EDGE ( 'NONE', *, *, #2546, .T. ) ; +#476 = ADVANCED_FACE ( 'NONE', ( #958 ), #952, .T. ) ; +#477 = CARTESIAN_POINT ( 'NONE', ( 21.44255112164583500, -15.51798801284064800, 37.24168871790749300 ) ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( 4.494640095631827300, 1.431270444513698300, 40.41363463513587800 ) ) ; +#479 = CARTESIAN_POINT ( 'NONE', ( -4.699000000001915600, 0.4400314253845689100, 37.38882461611528600 ) ) ; +#480 = EDGE_CURVE ( 'NONE', #2604, #2114, #916, .T. ) ; +#481 = EDGE_CURVE ( 'NONE', #6, #213, #886, .T. ) ; +#482 = CARTESIAN_POINT ( 'NONE', ( -7.163578722334593300, 3.378479304474067700, 39.58610306701164200 ) ) ; +#483 = CARTESIAN_POINT ( 'NONE', ( 3.966020782027252600, 2.520174628181139900, 37.17038346254926800 ) ) ; +#484 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#485 = EDGE_CURVE ( 'NONE', #2215, #6, #1031, .T. ) ; +#486 = CARTESIAN_POINT ( 'NONE', ( -7.371033944929408200, -39.63395680537091400, 39.96852174381996300 ) ) ; +#487 = VERTEX_POINT ( 'NONE', #1163 ) ; +#488 = CARTESIAN_POINT ( 'NONE', ( -7.347079310444713400, -39.53516298299121000, 39.97459144026987600 ) ) ; +#489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#490 = ORIENTED_EDGE ( 'NONE', *, *, #2180, .T. ) ; +#491 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 3.282765312563869300E-016, 37.43962887309924500 ) ) ; +#492 = AXIS2_PLACEMENT_3D ( 'NONE', #555, #150, #760 ) ; +#493 = EDGE_LOOP ( 'NONE', ( #617, #1406, #1943, #1474 ) ) ; +#494 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2332, #998, #2593, #1195, #2844, #1403, #174, #1593 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0006738747560560031600, 0.001347749512112006300, 0.002695499024224015200 ), + .UNSPECIFIED. ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( 4.376516873201193600, 1.725196346934374700, 37.21134763931901500 ) ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 24.25410196865981400, -13.30528264672454800, 39.56051128339901600 ) ) ; +#497 = EDGE_LOOP ( 'NONE', ( #1667, #1079, #1028, #1541 ) ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( -34.79019945774904700, -17.50000000000012100, 0.0000000000000000000 ) ) ; +#499 = VECTOR ( 'NONE', #2656, 1000.000000000000000 ) ; +#500 = VERTEX_POINT ( 'NONE', #2552 ) ; +#501 = VECTOR ( 'NONE', #1188, 1000.000000000000000 ) ; +#502 = FACE_OUTER_BOUND ( 'NONE', #2315, .T. ) ; +#503 = CARTESIAN_POINT ( 'NONE', ( -28.04482217976519100, -32.66020679514990400, 30.00000000000000000 ) ) ; +#504 = ORIENTED_EDGE ( 'NONE', *, *, #1746, .F. ) ; +#505 = LINE ( 'NONE', #572, #501 ) ; +#506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 7.060753650650952700, -38.59594911601463700, 40.00000000000000000 ) ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( -18.59594911601469700, -12.93924634934910000, 40.00000000000000000 ) ) ; +#509 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231568600, 34.86089611231624700, 30.00000000000000000 ) ) ; +#510 = EDGE_CURVE ( 'NONE', #209, #185, #882, .T. ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( -22.52017462818112400, -16.03397921797280600, 37.17038346254926800 ) ) ; +#512 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 7.530771205406572300, -40.97556746608113100, 39.83962769998237300 ) ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( -21.39040766670383300, -12.46633416701340900, 39.79188446163863100 ) ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( 28.04482217976525500, -32.66020679514958400, 30.00000000000000000 ) ) ; +#516 = ORIENTED_EDGE ( 'NONE', *, *, #340, .F. ) ; +#517 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1307, #2735, #274, #1717, #495, #1960, #697, #2230 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0009204074736004262800, 0.002248350615710591500, 0.002912322186765673400, 0.003576293757820756200 ), + .UNSPECIFIED. ) ; +#518 = VERTEX_POINT ( 'NONE', #2042 ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( -4.635906638058632900, 0.8845086972547340200, 37.31637200411187600 ) ) ; +#520 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#521 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.27199999999999800 ) ) ; +#522 = ORIENTED_EDGE ( 'NONE', *, *, #590, .T. ) ; +#523 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .F. ) ; +#524 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2458, #879, #1301, #64, #1495, #269, #1702, #488, #1952, #692 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001488298111837647300, 0.002976596223675294600, 0.004464894335512941700, 0.005953192447350589200 ), + .UNSPECIFIED. ) ; +#525 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#527 = AXIS2_PLACEMENT_3D ( 'NONE', #1819, #1588, #395 ) ; +#528 = CARTESIAN_POINT ( 'NONE', ( -4.698999999998672000, -0.3049891216978282700, 37.47484168932597000 ) ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( -4.452445505888727300, 1.518116024936872600, 37.23454346966066500 ) ) ; +#530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#531 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .F. ) ; +#532 = ORIENTED_EDGE ( 'NONE', *, *, #1975, .T. ) ; +#533 = EDGE_CURVE ( 'NONE', #6, #2215, #853, .T. ) ; +#534 = TOROIDAL_SURFACE ( 'NONE', #2713, 4.999999999999999100, 10.00000000000000000 ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, -40.00000000000000000, 17.27199999999999800 ) ) ; +#536 = DATE_TIME_ROLE ( 'classification_date' ) ; +#537 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.224646799147353200E-016, 0.0000000000000000000 ) ) ; +#538 = VECTOR ( 'NONE', #2139, 1000.000000000000000 ) ; +#539 = VERTEX_POINT ( 'NONE', #135 ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.37200000000000000 ) ) ; +#541 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005300, -24.95299999999979000, 17.27199999999999800 ) ) ; +#542 = ADVANCED_FACE ( 'NONE', ( #834 ), #2313, .F. ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 40.00100000000000500 ) ) ; +#544 = CARTESIAN_POINT ( 'NONE', ( -4.376516873203795100, 1.725196346927993400, 37.21134763931960500 ) ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( -4.193730148046988400, 2.131391522515981400, 37.17917958233369500 ) ) ; +#546 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#547 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2724, #1685, #1091, #2714, #1291, #54, #1490, #260, #1694, #482, #1941, #684 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001458216824229727500, 0.002187325236344591000, 0.002916433648459454900, 0.004374650472689181100, 0.005832867296918907300 ), + .UNSPECIFIED. ) ; +#548 = AXIS2_PLACEMENT_3D ( 'NONE', #1549, #1534, #1526 ) ; +#549 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.00000000000000000, 40.00000000000000000 ) ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( -4.086678575171269800, 2.330294407274346100, 37.17038346254926800 ) ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( 19.08353450425797600, -24.60876252318476500, 37.50000000000000000 ) ) ; +#552 = ORIENTED_EDGE ( 'NONE', *, *, #2523, .F. ) ; +#553 = CARTESIAN_POINT ( 'NONE', ( -3.966020782027273500, 2.520174628181106600, 37.17038346254926800 ) ) ; +#554 = VERTEX_POINT ( 'NONE', #983 ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 40.00100000000000500 ) ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999998200, -24.79900000000007100, 17.27199999999999800 ) ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( -29.99999999999999300, -22.50000000000006800, 3.000000000000000000 ) ) ; +#558 = EDGE_LOOP ( 'NONE', ( #183, #1271, #1457, #855 ) ) ; +#559 = CARTESIAN_POINT ( 'NONE', ( -22.33029440727434100, -24.08667857517134400, 37.17038346254926800 ) ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 40.00000000000000000 ) ) ; +#561 = ORIENTED_EDGE ( 'NONE', *, *, #22, .T. ) ; +#562 = DIRECTION ( 'NONE', ( 3.469446951953613400E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#563 = CARTESIAN_POINT ( 'NONE', ( 22.52017462818109900, -16.03397921797251200, 37.17038346254926800 ) ) ; +#564 = ORIENTED_EDGE ( 'NONE', *, *, #2635, .F. ) ; +#565 = CARTESIAN_POINT ( 'NONE', ( -22.32925401946209800, -15.91266031875360000, 40.55200177146444000 ) ) ; +#566 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#567 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#568 = ORIENTED_EDGE ( 'NONE', *, *, #306, .F. ) ; +#569 = TOROIDAL_SURFACE ( 'NONE', #2541, 7.199000000000000700, 2.500000000000000000 ) ; +#570 = ADVANCED_FACE ( 'NONE', ( #1831 ), #1319, .T. ) ; +#571 = DIRECTION ( 'NONE', ( -1.050710766793947400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( 12.66020679514987700, -48.04482217976512700, 40.00000000000000000 ) ) ; +#573 = LINE ( 'NONE', #2392, #499 ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( 22.13139152251908800, -24.19373014804511300, 37.17917958233354600 ) ) ; +#575 = FACE_OUTER_BOUND ( 'NONE', #1074, .T. ) ; +#576 = EDGE_CURVE ( 'NONE', #2146, #1894, #1265, .T. ) ; +#577 = DIRECTION ( 'NONE', ( -1.050710766793947400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 19.08353450425794800, -15.39123747681482400, 37.50000000000000000 ) ) ; +#579 = CARTESIAN_POINT ( 'NONE', ( -19.67597575816492400, -15.30280887419540800, 37.47639130574683700 ) ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( -20.64600045540707600, -27.51130628403178200, 39.87524548164947900 ) ) ; +#581 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001800, -15.20100000000006800, 17.37200000000000000 ) ) ; +#582 = DIRECTION ( 'NONE', ( 3.691686477924681800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#583 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#584 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1940, #1300, #62 ), + ( #1494, #268, #1701 ), + ( #486, #1950, #691 ), + ( #2217, #895, #2476 ), + ( #1103, #2732, #1306 ), + ( #1916, #661, #2184 ), + ( #867, #2437, #1075 ), + ( #2697, #1277, #37 ), + ( #1473, #244, #1679 ), + ( #464, #1924, #673 ), + ( #2190, #873, #2449 ), + ( #1084, #2703, #1283 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.431146867680865900E-017, 0.001366589151724503900, 0.002049883727586748800, 0.002733178303448993500, 0.004099767455173482900, 0.005466356606897973200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865485700, 1.000000000000000000), + ( 1.000000000000000000, 0.6962804023093928100, 1.000000000000000000), + ( 1.000000000000000000, 0.6838643731093073700, 1.000000000000000000), + ( 1.000000000000000000, 0.6648240515469415700, 1.000000000000000000), + ( 1.000000000000000000, 0.6584081091808239300, 1.000000000000000000), + ( 1.000000000000000000, 0.6458021328468083200, 1.000000000000000000), + ( 1.000000000000000000, 0.6395921105352073700, 1.000000000000000000), + ( 1.000000000000000000, 0.6222527413821156200, 1.000000000000000000), + ( 1.000000000000000000, 0.6123144868095781200, 1.000000000000000000), + ( 1.000000000000000000, 0.5983896303520698200, 1.000000000000000000), + ( 1.000000000000000000, 0.5944228552563556300, 1.000000000000000000), + ( 1.000000000000000000, 0.5944745579080736900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#585 = EDGE_CURVE ( 'NONE', #2143, #2064, #797, .T. ) ; +#586 = ADVANCED_FACE ( 'NONE', ( #755, #830 ), #2327, .T. ) ; +#587 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, -40.00000000000000000, 17.37200000000000000 ) ) ; +#588 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#589 = EDGE_CURVE ( 'NONE', #1613, #1105, #720, .T. ) ; +#590 = EDGE_CURVE ( 'NONE', #2105, #937, #1226, .T. ) ; +#591 = CARTESIAN_POINT ( 'NONE', ( -21.99713525186031400, -24.26389915187704800, 37.18630059465839800 ) ) ; +#592 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.27199999999999800 ) ) ; +#593 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 30.00000000000000000 ) ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.37200000000000000 ) ) ; +#595 = EDGE_LOOP ( 'NONE', ( #1102, #1167, #1198, #1208, #1260, #2669, #1288, #1349, #1451, #1502, #1529, #1559, #1600, #1738, #1822, #1858, #1891, #1930, #1959, #72, #2148, #2255, #2262, #2299 ) ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( 23.37584720577183000, -27.16407980706066600, 39.58639012268041300 ) ) ; +#597 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#598 = ORIENTED_EDGE ( 'NONE', *, *, #1929, .T. ) ; +#599 = PLANE ( 'NONE', #2848 ) ; +#600 = VERTEX_POINT ( 'NONE', #216 ) ; +#601 = CARTESIAN_POINT ( 'NONE', ( 18.59594911601471200, -27.06075365065069200, 40.00000000000000000 ) ) ; +#602 = CARTESIAN_POINT ( 'NONE', ( 19.08353450425794400, -15.39123747681482800, 39.99999999999999300 ) ) ; +#603 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #551, #2035, #1030, #2631 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009204074736004957700 ), + .UNSPECIFIED. ) ; +#604 = EDGE_LOOP ( 'NONE', ( #2350, #2385 ) ) ; +#605 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999995000, -15.20099999999979100, 17.37200000000000000 ) ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( -20.12092792643495200, -15.30021529939762100, 37.42594842690225200 ) ) ; +#607 = ORIENTED_EDGE ( 'NONE', *, *, #671, .F. ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 30.00000000000000000 ) ) ; +#609 = AXIS2_PLACEMENT_3D ( 'NONE', #560, #455, #562 ) ; +#610 = CYLINDRICAL_SURFACE ( 'NONE', #50, 50.00000000000000000 ) ; +#611 = CARTESIAN_POINT ( 'NONE', ( -4.799000000000000400, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#612 = ORIENTED_EDGE ( 'NONE', *, *, #1790, .F. ) ; +#613 = LINE ( 'NONE', #2347, #299 ) ; +#614 = CARTESIAN_POINT ( 'NONE', ( 20.64432878848897700, -27.51115975414477400, 39.87542036636904900 ) ) ; +#615 = CIRCLE ( 'NONE', #224, 2.500000000000000400 ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 19.67646981698171500, -15.30275915948249100, 37.47635238510176900 ) ) ; +#617 = ORIENTED_EDGE ( 'NONE', *, *, #2119, .F. ) ; +#618 = EDGE_CURVE ( 'NONE', #518, #2810, #1329, .T. ) ; +#619 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#620 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( 21.68064936599177300, -24.40177155707380100, 40.46057594772641200 ) ) ; +#622 = EDGE_CURVE ( 'NONE', #111, #820, #717, .T. ) ; +#623 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#624 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.999999999999998200, 0.0000000000000000000 ) ) ; +#625 = ORIENTED_EDGE ( 'NONE', *, *, #874, .F. ) ; +#626 = EDGE_CURVE ( 'NONE', #2543, #66, #759, .T. ) ; +#627 = CARTESIAN_POINT ( 'NONE', ( -19.08353450425797200, -15.39123747681509600, 37.50000000000000000 ) ) ; +#628 = ORIENTED_EDGE ( 'NONE', *, *, #1388, .T. ) ; +#629 = PLANE ( 'NONE', #2195 ) ; +#630 = ORIENTED_EDGE ( 'NONE', *, *, #1838, .F. ) ; +#631 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 3.966020782027287300, -42.52017462818108100, 37.17038346254926800 ) ) ; +#633 = ORIENTED_EDGE ( 'NONE', *, *, #1311, .T. ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.27199999999999800 ) ) ; +#635 = CARTESIAN_POINT ( 'NONE', ( 6.694717353275202700, 4.254101968659886000, 39.56051128339901600 ) ) ; +#636 = FACE_OUTER_BOUND ( 'NONE', #2395, .T. ) ; +#637 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 30.00000000000000000 ) ) ; +#638 = CARTESIAN_POINT ( 'NONE', ( -22.13139152251908800, -15.80626985195475100, 37.17917958233354600 ) ) ; +#639 = ORIENTED_EDGE ( 'NONE', *, *, #22, .F. ) ; +#640 = CIRCLE ( 'NONE', #271, 4.698999999999998100 ) ; +#641 = LINE ( 'NONE', #1874, #538 ) ; +#642 = ORIENTED_EDGE ( 'NONE', *, *, #1687, .F. ) ; +#643 = CIRCLE ( 'NONE', #2748, 4.799000000000001300 ) ; +#644 = AXIS2_PLACEMENT_3D ( 'NONE', #833, #2386, #1041 ) ; +#645 = CARTESIAN_POINT ( 'NONE', ( 4.608762523184978500, -0.9164654957420062000, 37.50000000000000000 ) ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, -2.045723378207577100E-011, 37.43962887310160400 ) ) ; +#647 = CARTESIAN_POINT ( 'NONE', ( 7.535140705073025000, 1.142439783501101100, 39.82078459404198200 ) ) ; +#648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#649 = ADVANCED_FACE ( 'NONE', ( #668 ), #1116, .T. ) ; +#650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#651 = EDGE_LOOP ( 'NONE', ( #2122, #469, #2343, #532, #230, #711, #1711, #1791 ) ) ; +#652 = DIRECTION ( 'NONE', ( -1.033672213818910400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#653 = VERTEX_POINT ( 'NONE', #222 ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( 4.710801740223459400, -39.83840337468793500, 40.13955959771967500 ) ) ; +#655 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .T. ) ; +#656 = ORIENTED_EDGE ( 'NONE', *, *, #47, .F. ) ; +#657 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#658 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#659 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1724, #703, #2497, #1122 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.403348247575207000, 1.738244406014585600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9906755314555129000, 0.9906755314555129000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#660 = FACE_OUTER_BOUND ( 'NONE', #1902, .T. ) ; +#661 = CARTESIAN_POINT ( 'NONE', ( -4.634464845575594800, -40.83854657404647500, 40.30864583454238200 ) ) ; +#662 = ORIENTED_EDGE ( 'NONE', *, *, #197, .T. ) ; +#663 = ADVANCED_FACE ( 'NONE', ( #2471 ), #2428, .T. ) ; +#664 = CIRCLE ( 'NONE', #398, 4.952999999999999400 ) ; +#665 = VERTEX_POINT ( 'NONE', #1099 ) ; +#666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#667 = CIRCLE ( 'NONE', #2822, 4.952999999999999400 ) ; +#668 = FACE_OUTER_BOUND ( 'NONE', #1974, .T. ) ; +#669 = VERTEX_POINT ( 'NONE', #272 ) ; +#670 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#671 = EDGE_CURVE ( 'NONE', #103, #2226, #640, .T. ) ; +#672 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.27199999999999800 ) ) ; +#673 = CARTESIAN_POINT ( 'NONE', ( -4.264943925799806300, -41.99486412396549900, 37.18647590509636600 ) ) ; +#674 = EDGE_CURVE ( 'NONE', #1391, #1418, #664, .T. ) ; +#675 = DIRECTION ( 'NONE', ( 3.502369222646491800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#676 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( -12.66020679514984300, 8.044822179765182200, 40.00000000000000000 ) ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( 22.57662236135899300, -12.59502584582821600, 39.65558495857837300 ) ) ; +#679 = EDGE_LOOP ( 'NONE', ( #831, #883, #2709, #343, #15, #694 ) ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( 7.405616128424836300, 2.573590569839197400, 39.65590563316192200 ) ) ; +#681 = ORIENTED_EDGE ( 'NONE', *, *, #2333, .F. ) ; +#682 = AXIS2_PLACEMENT_3D ( 'NONE', #1564, #1563, #1554 ) ; +#683 = ORIENTED_EDGE ( 'NONE', *, *, #2333, .T. ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( -6.694717353275236400, 4.254101968659828300, 39.56051128339901600 ) ) ; +#685 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#686 = EDGE_LOOP ( 'NONE', ( #2742, #2400, #1357, #333, #951, #826, #662 ) ) ; +#687 = ORIENTED_EDGE ( 'NONE', *, *, #1089, .T. ) ; +#688 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1612, #400, #816, #2370, #1027, #2629, #1229, #75, #1501, #275, #1718, #496 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001458216824229722700, 0.002187325236344584500, 0.002916433648459446700, 0.004374650472689169800, 0.005832867296918894200 ), + .UNSPECIFIED. ) ; +#689 = ORIENTED_EDGE ( 'NONE', *, *, #2164, .F. ) ; +#690 = CYLINDRICAL_SURFACE ( 'NONE', #2773, 4.698999999999999800 ) ; +#691 = CARTESIAN_POINT ( 'NONE', ( -4.697191125804667200, -39.67597575816572000, 37.47639130574683700 ) ) ; +#692 = CARTESIAN_POINT ( 'NONE', ( -7.060753650650959800, -38.59594911601470100, 40.00000000000000000 ) ) ; +#693 = FACE_OUTER_BOUND ( 'NONE', #1978, .T. ) ; +#694 = ORIENTED_EDGE ( 'NONE', *, *, #2533, .T. ) ; +#695 = DIRECTION ( 'NONE', ( -1.040834085586084300E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#696 = ADVANCED_FACE ( 'NONE', ( #693 ), #610, .F. ) ; +#697 = CARTESIAN_POINT ( 'NONE', ( 4.086678575170318500, 2.330294407275849400, 37.17038346254926800 ) ) ; +#698 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#699 = CARTESIAN_POINT ( 'NONE', ( -7.060753650650911000, -38.59594911601472900, 37.50000000000000000 ) ) ; +#700 = EDGE_CURVE ( 'NONE', #235, #2702, #615, .T. ) ; +#701 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 20.71723937533484200, -15.35366282655437500, 37.34371698406747000 ) ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( 0.8411768605095086800, 15.07059174458554000, 0.9952938836943073800 ) ) ; +#704 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ; +#705 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.999999999999998200, 0.0000000000000000000 ) ) ; +#706 = ORIENTED_EDGE ( 'NONE', *, *, #709, .T. ) ; +#707 = DIRECTION ( 'NONE', ( -1.033672213818910400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#708 = EDGE_CURVE ( 'NONE', #1032, #1740, #2359, .T. ) ; +#709 = EDGE_CURVE ( 'NONE', #2642, #2013, #641, .T. ) ; +#710 = VERTEX_POINT ( 'NONE', #632 ) ; +#711 = ORIENTED_EDGE ( 'NONE', *, *, #2427, .T. ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, -40.00000000000000000, 0.0000000000000000000 ) ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( 7.509038003865911500, -41.95473585451339500, 39.72655827562585500 ) ) ; +#714 = FACE_OUTER_BOUND ( 'NONE', #403, .T. ) ; +#715 = ORIENTED_EDGE ( 'NONE', *, *, #1067, .T. ) ; +#716 = CARTESIAN_POINT ( 'NONE', ( -20.71588041606872500, -15.35345707382462500, 37.34391334530541000 ) ) ; +#717 = CIRCLE ( 'NONE', #221, 10.00000000000000000 ) ; +#718 = TOROIDAL_SURFACE ( 'NONE', #2761, 60.00000000000000700, 10.00000000000000000 ) ; +#719 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#720 = CIRCLE ( 'NONE', #644, 2.500000000000000900 ) ; +#721 = EDGE_LOOP ( 'NONE', ( #1671, #1608, #467, #1932, #1426 ) ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( -3.966020782027275300, 2.520174628181105300, 40.55200177161794500 ) ) ; +#723 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#725 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #2001 ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( -3.966020782027275300, 2.520174628181105700, 37.17038346254926800 ) ) ; +#727 = DIRECTION ( 'NONE', ( -1.012132888671610400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#728 = AXIS2_PLACEMENT_3D ( 'NONE', #991, #650, #675 ) ; +#729 = CARTESIAN_POINT ( 'NONE', ( -29.99999999999999300, -22.50000000000010300, 3.000000000000000000 ) ) ; +#730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#731 = CARTESIAN_POINT ( 'NONE', ( -4.608762523184967800, -0.9164654957420521600, 37.50000000000000000 ) ) ; +#732 = EDGE_CURVE ( 'NONE', #1097, #2716, #573, .T. ) ; +#733 = CARTESIAN_POINT ( 'NONE', ( -6.936342272451806700, 3.873854728708842700, 39.56051128311514700 ) ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999995000, -15.30099999999979200, 17.37200000000000000 ) ) ; +#735 = ADVANCED_FACE ( 'NONE', ( #502 ), #444, .F. ) ; +#736 = DIRECTION ( 'NONE', ( 0.8440137863433196900, 0.5363214786510172000, -0.0000000000000000000 ) ) ; +#737 = APPROVAL_ROLE ( '' ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( -4.085816667080241200, 2.331650799964855900, 40.55200177192747200 ) ) ; +#739 = ORIENTED_EDGE ( 'NONE', *, *, #1715, .T. ) ; +#740 = DIRECTION ( 'NONE', ( -0.5363214786510193100, 0.8440137863433181400, 1.949134757254264400E-016 ) ) ; +#741 = ORIENTED_EDGE ( 'NONE', *, *, #2588, .T. ) ; +#742 = CARTESIAN_POINT ( 'NONE', ( -4.125765669949977600, 2.268782705478784100, 37.17038346232129000 ) ) ; +#743 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( -7.130632869279454900, 3.453619434732559100, 39.58173412484252700 ) ) ; +#745 = EDGE_LOOP ( 'NONE', ( #2662, #2733 ) ) ; +#746 = ORIENTED_EDGE ( 'NONE', *, *, #2754, .F. ) ; +#747 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#748 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#749 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#750 = EDGE_CURVE ( 'NONE', #1087, #2462, #468, .T. ) ; +#751 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#752 = ORIENTED_EDGE ( 'NONE', *, *, #1268, .F. ) ; +#753 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -50.00000000000000000, 3.000000000000000000 ) ) ; +#754 = CARTESIAN_POINT ( 'NONE', ( -4.196691795647314600, 2.133127373422191400, 40.53108866026783400 ) ) ; +#755 = FACE_BOUND ( 'NONE', #2675, .T. ) ; +#756 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ; +#757 = CYLINDRICAL_SURFACE ( 'NONE', #2793, 4.698999999999999800 ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( -4.263899151877064100, 1.997135251860092400, 37.18630059465839800 ) ) ; +#759 = CIRCLE ( 'NONE', #8, 50.00000000000000000 ) ; +#760 = DIRECTION ( 'NONE', ( 3.691686477924681800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#761 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#762 = EDGE_CURVE ( 'NONE', #1481, #2702, #1680, .T. ) ; +#763 = DIRECTION ( 'NONE', ( 0.5363214786510083200, 0.8440137863433253600, 5.847404271762792300E-016 ) ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 20.44003142540165600, -24.69899999999979900, 37.38882461611263600 ) ) ; +#765 = CARTESIAN_POINT ( 'NONE', ( -7.404974154170847800, 2.576622361358247700, 39.65558495857866500 ) ) ; +#766 = ADVANCED_FACE ( 'NONE', ( #636 ), #442, .T. ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( -4.401140731863792500, 1.682278208155830700, 40.46087376877419200 ) ) ; +#768 = AXIS2_PLACEMENT_3D ( 'NONE', #2849, #2102, #2623 ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( -24.25410196865985300, -13.30528264672485200, 39.56051128339901600 ) ) ; +#770 = CARTESIAN_POINT ( 'NONE', ( -18.59594911601470500, -12.93924634934916900, 40.00000000000000000 ) ) ; +#771 = CARTESIAN_POINT ( 'NONE', ( -19.38000455234718100, -24.66771643287943800, 37.49999999444089100 ) ) ; +#772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.27199999999999800 ) ) ; +#774 = CARTESIAN_POINT ( 'NONE', ( 22.52017462818112700, -23.96602078202705100, 37.17038346254926800 ) ) ; +#775 = CARTESIAN_POINT ( 'NONE', ( -4.482011987159330200, 1.442551121645363900, 37.24168871790749300 ) ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( -7.488328808036747800, 2.116685519541168200, 39.70776045654668700 ) ) ; +#777 = DIRECTION ( 'NONE', ( -0.1950341552973083300, 0.9807964509863733600, 0.0000000000000000000 ) ) ; +#778 = PLANE ( 'NONE', #2867 ) ; +#779 = ORIENTED_EDGE ( 'NONE', *, *, #1603, .T. ) ; +#780 = CARTESIAN_POINT ( 'NONE', ( -20.35051599700383200, -15.30537022895089500, 40.22578517841062500 ) ) ; +#781 = CARTESIAN_POINT ( 'NONE', ( -20.83985567029282700, -24.63423621495808300, 40.30887212019671000 ) ) ; +#782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#783 = VERTEX_POINT ( 'NONE', #439 ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( -4.635906638055762300, -40.88450869726808900, 37.31637200410992200 ) ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( -4.494143236640044700, 1.432844415390532900, 40.41392066168188500 ) ) ; +#786 = EDGE_LOOP ( 'NONE', ( #1662, #1755 ) ) ; +#787 = CARTESIAN_POINT ( 'NONE', ( -4.564004543380156600, 1.157404566904311100, 37.28082034425731500 ) ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 9.999999999999998200, 0.0000000000000000000 ) ) ; +#789 = ORIENTED_EDGE ( 'NONE', *, *, #2690, .F. ) ; +#790 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #140, #764, #1572, #365, #1808, #574, #2060, #774 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0009204074736004957700, 0.002248350615710629300, 0.002912322186765696400, 0.003576293757820763100 ), + .UNSPECIFIED. ) ; +#791 = VECTOR ( 'NONE', #2067, 1000.000000000000000 ) ; +#792 = CARTESIAN_POINT ( 'NONE', ( -23.45361943473258400, -27.13063286927914700, 39.58173412484261200 ) ) ; +#793 = ORIENTED_EDGE ( 'NONE', *, *, #1993, .F. ) ; +#794 = CARTESIAN_POINT ( 'NONE', ( 4.799000000000000400, -40.00000000000000000, 17.37200000000000000 ) ) ; +#795 = EDGE_CURVE ( 'NONE', #2716, #1182, #440, .T. ) ; +#796 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#797 = LINE ( 'NONE', #375, #791 ) ; +#798 = DIRECTION ( 'NONE', ( 3.691686477924681800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#799 = VERTEX_POINT ( 'NONE', #1651 ) ; +#800 = CIRCLE ( 'NONE', #2756, 2.500000000000000900 ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( 24.25410196865987100, -26.69471735327500300, 39.56051128339901600 ) ) ; +#802 = CARTESIAN_POINT ( 'NONE', ( -7.533617321397706200, 1.392658340895791100, 39.79162264665483000 ) ) ; +#803 = CIRCLE ( 'NONE', #902, 60.00000000000000700 ) ; +#804 = ORIENTED_EDGE ( 'NONE', *, *, #1348, .T. ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( -4.603439341132609100, 0.9942749739342216000, 40.33585679829688800 ) ) ; +#806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#807 = CARTESIAN_POINT ( 'NONE', ( 19.08353450425796500, -24.60876252318476200, 39.99999999999999300 ) ) ; +#808 = DIRECTION ( 'NONE', ( -0.8440137863433250200, 0.5363214786510084300, 0.0000000000000000000 ) ) ; +#809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( -4.799000000000000400, -40.00000000000000000, 17.37200000000000000 ) ) ; +#811 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2809, #1168, #1561, #355 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.403348247575207000, 1.738244406014585600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9906755314555129000, 0.9906755314555129000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#812 = CARTESIAN_POINT ( 'NONE', ( -4.646337173445393100, 0.7172393753349687300, 37.34371698406747000 ) ) ; +#813 = EDGE_CURVE ( 'NONE', #2061, #1097, #388, .T. ) ; +#814 = CARTESIAN_POINT ( 'NONE', ( 20.26935444099883600, -24.69364533168171500, 37.40656527383677600 ) ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( 19.63481492320232700, -12.62875148519798600, 39.96846984962993300 ) ) ; +#816 = CARTESIAN_POINT ( 'NONE', ( 19.53333314085831100, -12.65340269959726500, 39.97468994010727500 ) ) ; +#817 = ORIENTED_EDGE ( 'NONE', *, *, #247, .F. ) ; +#818 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#819 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.27199999999999800 ) ) ; +#820 = VERTEX_POINT ( 'NONE', #24 ) ; +#821 = CARTESIAN_POINT ( 'NONE', ( -22.52017462818111000, -23.96602078202733900, 37.17038346254926800 ) ) ; +#822 = EDGE_CURVE ( 'NONE', #1574, #1173, #447, .T. ) ; +#823 = ORIENTED_EDGE ( 'NONE', *, *, #1518, .T. ) ; +#824 = CARTESIAN_POINT ( 'NONE', ( 23.45007313557639300, -27.13204635477347500, 39.58196787209198000 ) ) ; +#825 = ORIENTED_EDGE ( 'NONE', *, *, #481, .T. ) ; +#826 = ORIENTED_EDGE ( 'NONE', *, *, #2339, .T. ) ; +#827 = CARTESIAN_POINT ( 'NONE', ( 22.68160739325505300, -15.77993106828317400, 30.00000000000000000 ) ) ; +#828 = CARTESIAN_POINT ( 'NONE', ( -7.535173676053922500, 1.144506876533834200, 39.82054932554404300 ) ) ; +#829 = AXIS2_PLACEMENT_3D ( 'NONE', #1213, #1239, #1199 ) ; +#830 = FACE_OUTER_BOUND ( 'NONE', #2684, .T. ) ; +#831 = ORIENTED_EDGE ( 'NONE', *, *, #1837, .F. ) ; +#832 = FACE_OUTER_BOUND ( 'NONE', #1361, .T. ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( 23.86097832480867000, -26.07605524788535300, 37.17038346254926800 ) ) ; +#834 = FACE_OUTER_BOUND ( 'NONE', #363, .T. ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999962700, 0.0000000000000000000, 3.000000000000000000 ) ) ; +#836 = DIRECTION ( 'NONE', ( 0.5144957554275280100, 0.0000000000000000000, -0.8574929257125434300 ) ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( -4.634236214957915000, 0.8398556702931421200, 40.30887212019670300 ) ) ; +#838 = DIRECTION ( 'NONE', ( 3.614760316684323300E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#839 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#840 = CARTESIAN_POINT ( 'NONE', ( -21.51811602494493800, -15.54755449411417500, 37.23454346965972000 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( -4.666959556425559300, 0.5677897160269446100, 37.36541199509918000 ) ) ; +#842 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#843 = ORIENTED_EDGE ( 'NONE', *, *, #2741, .T. ) ; +#844 = CARTESIAN_POINT ( 'NONE', ( 4.685672486977125600, -0.5296972164586173400, 40.07774354325394500 ) ) ; +#845 = ORIENTED_EDGE ( 'NONE', *, *, #172, .T. ) ; +#846 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#847 = EDGE_CURVE ( 'NONE', #232, #1418, #342, .T. ) ; +#848 = ORIENTED_EDGE ( 'NONE', *, *, #1411, .T. ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( -7.511306284031238800, 0.6460004554065301700, 39.87524548164960700 ) ) ; +#850 = ORIENTED_EDGE ( 'NONE', *, *, #1994, .T. ) ; +#851 = EDGE_LOOP ( 'NONE', ( #88, #1786, #564, #2228 ) ) ; +#852 = CARTESIAN_POINT ( 'NONE', ( 4.699766244479634200, -40.12179417283650200, 37.42584164642438800 ) ) ; +#853 = CIRCLE ( 'NONE', #404, 4.953000000000000300 ) ; +#854 = EDGE_CURVE ( 'NONE', #2672, #2745, #420, .T. ) ; +#855 = ORIENTED_EDGE ( 'NONE', *, *, #2440, .T. ) ; +#856 = FACE_OUTER_BOUND ( 'NONE', #2599, .T. ) ; +#857 = VECTOR ( 'NONE', #2536, 1000.000000000000000 ) ; +#858 = ORIENTED_EDGE ( 'NONE', *, *, #2276, .F. ) ; +#859 = VECTOR ( 'NONE', #2647, 1000.000000000000000 ) ; +#860 = CARTESIAN_POINT ( 'NONE', ( -4.679575101492059900, 0.5185042784553612900, 40.25394205036033000 ) ) ; +#861 = EDGE_CURVE ( 'NONE', #665, #239, #297, .T. ) ; +#862 = AXIS2_PLACEMENT_3D ( 'NONE', #1556, #349, #1792 ) ; +#863 = CARTESIAN_POINT ( 'NONE', ( 7.371248514801613400, -39.63481492320149600, 39.96846984963001100 ) ) ; +#864 = ADVANCED_FACE ( 'NONE', ( #1573, #2874, #266, #262, #217, #214 ), #1066, .F. ) ; +#865 = CARTESIAN_POINT ( 'NONE', ( -4.693592464893322700, 0.2703450321985637600, 37.40643411029606100 ) ) ; +#866 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#867 = CARTESIAN_POINT ( 'NONE', ( -7.533665832987083800, -41.39040766670392200, 39.79188446163853900 ) ) ; +#868 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#869 = AXIS2_PLACEMENT_3D ( 'NONE', #1245, #1193, #218 ) ; +#870 = CARTESIAN_POINT ( 'NONE', ( -7.486051149685056100, 0.3947502989078678900, 39.90112219381974500 ) ) ; +#871 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 0.0000000000000000000 ) ) ; +#872 = EDGE_LOOP ( 'NONE', ( #880, #752, #1788, #1295, #612 ) ) ; +#873 = CARTESIAN_POINT ( 'NONE', ( -4.087339681247915000, -42.32925401946295100, 40.55200177146444000 ) ) ; +#874 = EDGE_CURVE ( 'NONE', #105, #1605, #1085, .T. ) ; +#875 = EDGE_LOOP ( 'NONE', ( #746, #1263, #2738, #1839 ) ) ; +#876 = ORIENTED_EDGE ( 'NONE', *, *, #709, .F. ) ; +#877 = EDGE_LOOP ( 'NONE', ( #2192, #1140, #1703, #793 ) ) ; +#878 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -50.00000000000000000, 0.0000000000000000000 ) ) ; +#879 = CARTESIAN_POINT ( 'NONE', ( -6.961483047751638500, -43.83429046972852200, 39.56051128339902300 ) ) ; +#880 = ORIENTED_EDGE ( 'NONE', *, *, #2131, .F. ) ; +#881 = CARTESIAN_POINT ( 'NONE', ( 22.13312737342051400, -15.80330820435184700, 40.53108866026782700 ) ) ; +#882 = CIRCLE ( 'NONE', #1129, 4.799000000000000400 ) ; +#883 = ORIENTED_EDGE ( 'NONE', *, *, #1815, .T. ) ; +#884 = LINE ( 'NONE', #2130, #859 ) ; +#885 = CARTESIAN_POINT ( 'NONE', ( 4.482601985295149300, 1.440662696376023200, 37.24192922384393300 ) ) ; +#886 = LINE ( 'NONE', #535, #857 ) ; +#887 = ORIENTED_EDGE ( 'NONE', *, *, #2175, .T. ) ; +#888 = ADVANCED_FACE ( 'NONE', ( #188 ), #1546, .F. ) ; +#889 = CARTESIAN_POINT ( 'NONE', ( -4.694566432472460500, 0.3515073820011548900, 40.22595147222783400 ) ) ; +#890 = DIRECTION ( 'NONE', ( -0.5363214786510122100, -0.8440137863433226900, -4.075463583349825500E-016 ) ) ; +#891 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, -39.99999999997954300, 37.43962887310160400 ) ) ; +#892 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 40.00000000000000000 ) ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231598400, 34.86089611231578500, 40.00000000000000000 ) ) ; +#894 = CARTESIAN_POINT ( 'NONE', ( 4.608762523184977600, -0.9164654957420059800, 37.50000000000000000 ) ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( -4.694629771049271500, -40.35051599700303600, 40.22578517841062500 ) ) ; +#896 = EDGE_LOOP ( 'NONE', ( #715, #912, #293, #1399, #2154 ) ) ; +#897 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1816, #379, #784, #2334, #1000, #2595, #1196, #2845 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0009204074736004431900, 0.002248350615710602400, 0.002912322186765683000, 0.003576293757820763100 ), + .UNSPECIFIED. ) ; +#898 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 37.17038346254926800 ) ) ; +#899 = CARTESIAN_POINT ( 'NONE', ( -19.38996809161675100, -24.66969771091450200, 37.50000000000000000 ) ) ; +#900 = ORIENTED_EDGE ( 'NONE', *, *, #1925, .T. ) ; +#901 = EDGE_CURVE ( 'NONE', #1173, #1574, #110, .T. ) ; +#902 = AXIS2_PLACEMENT_3D ( 'NONE', #1735, #512, #1986 ) ; +#903 = ORIENTED_EDGE ( 'NONE', *, *, #1207, .F. ) ; +#904 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005000, -24.69899999999979200, 40.00100000000000500 ) ) ; +#905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#906 = DIRECTION ( 'NONE', ( -0.9807964509863756900, 0.1950341552972967000, 0.0000000000000000000 ) ) ; +#907 = EDGE_LOOP ( 'NONE', ( #2827, #568, #1108, #1641, #2308 ) ) ; +#908 = EDGE_LOOP ( 'NONE', ( #414, #2381, #417, #45 ) ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( -4.220068931716612700, 2.681607393255060600, 30.00000000000000000 ) ) ; +#910 = ADVANCED_FACE ( 'NONE', ( #149 ), #76, .F. ) ; +#911 = CIRCLE ( 'NONE', #2374, 4.952999999999999400 ) ; +#912 = ORIENTED_EDGE ( 'NONE', *, *, #2286, .F. ) ; +#913 = FACE_BOUND ( 'NONE', #433, .T. ) ; +#914 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.37200000000000000 ) ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( -27.93200000000000200, -20.00000000000006800, 39.56051128339900900 ) ) ; +#916 = CIRCLE ( 'NONE', #1581, 15.00000000000000000 ) ; +#917 = VERTEX_POINT ( 'NONE', #1810 ) ; +#918 = CYLINDRICAL_SURFACE ( 'NONE', #2813, 50.00000000000000000 ) ; +#919 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( 7.222969496246929700, -39.06215095579540300, 40.00000000000000000 ) ) ; +#922 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#923 = DIRECTION ( 'NONE', ( 0.8574929257125434300, -0.0000000000000000000, -0.5144957554275280100 ) ) ; +#924 = EDGE_CURVE ( 'NONE', #2439, #1605, #2193, .T. ) ; +#925 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#926 = FACE_OUTER_BOUND ( 'NONE', #721, .T. ) ; +#927 = ADVANCED_FACE ( 'NONE', ( #2160 ), #778, .F. ) ; +#928 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231582800, -74.86089611231602700, 0.0000000000000000000 ) ) ; +#929 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#930 = CARTESIAN_POINT ( 'NONE', ( 7.163578722334612800, -43.37847930447402700, 39.58610306701163500 ) ) ; +#931 = CARTESIAN_POINT ( 'NONE', ( -21.43127044451240300, -15.50535990436945100, 40.41363463513587800 ) ) ; +#932 = CARTESIAN_POINT ( 'NONE', ( -29.99999999999999300, -22.50000000000010300, 0.0000000000000000000 ) ) ; +#933 = DIRECTION ( 'NONE', ( 3.502369222646491800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#934 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1798, #559, #2571, #1179, #2819, #1376, #152, #1570 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0006738747560560185500, 0.001347749512112037100, 0.002695499024224069900 ), + .UNSPECIFIED. ) ; +#935 = CARTESIAN_POINT ( 'NONE', ( -4.699766244479628900, 0.1217941728356881400, 37.42584164642518400 ) ) ; +#936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#937 = VERTEX_POINT ( 'NONE', #169 ) ; +#938 = APPROVAL_ROLE ( '' ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( -7.371248514801018300, -0.3651850767980526200, 39.96846984963004700 ) ) ; +#940 = CARTESIAN_POINT ( 'NONE', ( 3.966020782027251700, 2.520174628181139500, 37.17038346254926800 ) ) ; +#941 = VERTEX_POINT ( 'NONE', #993 ) ; +#942 = ADVANCED_FACE ( 'NONE', ( #2715 ), #184, .T. ) ; +#943 = EDGE_CURVE ( 'NONE', #1539, #487, #71, .T. ) ; +#944 = VERTEX_POINT ( 'NONE', #2342 ) ; +#945 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#946 = CARTESIAN_POINT ( 'NONE', ( -4.710801740223650400, -0.1615966253112839600, 40.13955959771968200 ) ) ; +#947 = ORIENTED_EDGE ( 'NONE', *, *, #215, .T. ) ; +#948 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( -4.697240840517303600, -0.3235301830182148500, 37.47635238510177700 ) ) ; +#950 = DIRECTION ( 'NONE', ( 0.5363214786510166500, -0.8440137863433198100, 2.498436370662284100E-015 ) ) ; +#951 = ORIENTED_EDGE ( 'NONE', *, *, #1774, .T. ) ; +#952 = TOROIDAL_SURFACE ( 'NONE', #243, 7.199000000000000700, 2.500000000000000000 ) ; +#953 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#954 = VERTEX_POINT ( 'NONE', #2084 ) ; +#955 = CIRCLE ( 'NONE', #2799, 2.500000000000000000 ) ; +#956 = EDGE_CURVE ( 'NONE', #1032, #107, #13, .T. ) ; +#957 = PLANE ( 'NONE', #2768 ) ; +#958 = FACE_OUTER_BOUND ( 'NONE', #31, .T. ) ; +#959 = ORIENTED_EDGE ( 'NONE', *, *, #2734, .T. ) ; +#960 = CARTESIAN_POINT ( 'NONE', ( -7.243065250951860700, -0.8800946447251561900, 40.00000000000000000 ) ) ; +#961 = DIRECTION ( 'NONE', ( -1.062292391902515000E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#962 = ADVANCED_FACE ( 'NONE', ( #143 ), #599, .F. ) ; +#963 = CARTESIAN_POINT ( 'NONE', ( -4.685737593188032500, -0.5293698074187885800, 40.07780935511240700 ) ) ; +#964 = DIRECTION ( 'NONE', ( -0.9807964509863756900, 0.1950341552972968400, -3.263585530387723000E-015 ) ) ; +#965 = AXIS2_PLACEMENT_3D ( 'NONE', #1919, #2134, #25 ) ; +#966 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#967 = CARTESIAN_POINT ( 'NONE', ( 22.52017462818109900, -16.03397921797251200, 37.17038346254926800 ) ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( 6.694717353275258600, -44.25410196865979600, 39.56051128339901600 ) ) ; +#969 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( -4.667716432879352300, -0.6199954476528799500, 37.49999999444089100 ) ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( -7.060753650650892300, -1.404050883985328100, 40.00000000000000000 ) ) ; +#972 = CARTESIAN_POINT ( 'NONE', ( -19.08353450425794800, -24.60876252318503900, 39.99999999999999300 ) ) ; +#973 = CARTESIAN_POINT ( 'NONE', ( 3.749999999999997800, -20.00000000000000000, 0.0000000000000000000 ) ) ; +#974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#975 = VERTEX_POINT ( 'NONE', #1599 ) ; +#976 = VERTEX_POINT ( 'NONE', #1011 ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( -4.608762523184966900, -0.9164654957420593800, 39.99999999999999300 ) ) ; +#978 = CARTESIAN_POINT ( 'NONE', ( -4.608762523184967800, -0.9164654957420508300, 37.50000000000000000 ) ) ; +#979 = CARTESIAN_POINT ( 'NONE', ( 28.04482217976526200, -32.66020679514958400, 0.0000000000000000000 ) ) ; +#980 = ORIENTED_EDGE ( 'NONE', *, *, #1321, .T. ) ; +#981 = CARTESIAN_POINT ( 'NONE', ( -22.52017462818112400, -16.03397921797280600, 37.17038346254926800 ) ) ; +#982 = VERTEX_POINT ( 'NONE', #1215 ) ; +#983 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999997200, -17.49999999999968700, 0.0000000000000000000 ) ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( -19.11990535527507300, -27.24306525095061100, 40.00000000000000000 ) ) ; +#985 = DIRECTION ( 'NONE', ( 3.614760316684323300E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#986 = ORIENTED_EDGE ( 'NONE', *, *, #208, .T. ) ; +#987 = CIRCLE ( 'NONE', #2066, 2.500000000000000900 ) ; +#988 = VERTEX_POINT ( 'NONE', #2351 ) ; +#989 = EDGE_CURVE ( 'NONE', #982, #99, #14, .T. ) ; +#990 = CIRCLE ( 'NONE', #1892, 10.00000000000000200 ) ; +#991 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.27199999999999800 ) ) ; +#992 = VECTOR ( 'NONE', #1334, 1000.000000000000000 ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( -7.060753650650952700, -1.404050883985333200, 40.00000000000000000 ) ) ; +#994 = ORIENTED_EDGE ( 'NONE', *, *, #989, .F. ) ; +#995 = LINE ( 'NONE', #624, #1144 ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00000000000000000 ) ) ; +#997 = CARTESIAN_POINT ( 'NONE', ( -20.71723937533449300, -24.64633717344555200, 37.34371698406747000 ) ) ; +#998 = CARTESIAN_POINT ( 'NONE', ( 4.086678575171281300, -42.33029440727434400, 37.17038346254927500 ) ) ; +#999 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1760, #528, #2008, #731 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002695499024224039900, 0.003629634443215537700 ), + .UNSPECIFIED. ) ; +#1000 = CARTESIAN_POINT ( 'NONE', ( -4.376516873201199900, -41.72519634693436100, 37.21134763931901500 ) ) ; +#1001 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1002 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001800, -15.30100000000006900, 40.00100000000000500 ) ) ; +#1005 = EDGE_CURVE ( 'NONE', #937, #1705, #1183, .T. ) ; +#1006 = CARTESIAN_POINT ( 'NONE', ( -22.33165079996624100, -24.08581666708105800, 40.55200177192747200 ) ) ; +#1007 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1008 = PLANE ( 'NONE', #2700 ) ; +#1009 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( 21.96386351287865700, -27.50823821131612200, 39.72549349159630300 ) ) ; +#1011 = CARTESIAN_POINT ( 'NONE', ( -28.04482217976519100, -32.66020679514990400, 0.0000000000000000000 ) ) ; +#1012 = EDGE_LOOP ( 'NONE', ( #1865, #2551, #252 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( 19.11946895514718400, -27.24291340466973600, 40.00000000000000000 ) ) ; +#1014 = CARTESIAN_POINT ( 'NONE', ( 19.08353450425794800, -15.39123747681482400, 37.50000000000000000 ) ) ; +#1015 = VERTEX_POINT ( 'NONE', #1845 ) ; +#1016 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1017 = ORIENTED_EDGE ( 'NONE', *, *, #2107, .T. ) ; +#1018 = CARTESIAN_POINT ( 'NONE', ( -12.66020679514980800, -48.04482217976524100, 30.00000000000000000 ) ) ; +#1019 = AXIS2_PLACEMENT_3D ( 'NONE', #370, #367, #357 ) ; +#1020 = EDGE_LOOP ( 'NONE', ( #2314, #1113, #504, #1910 ) ) ; +#1021 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999997200, -17.49999999999968700, 3.000000000000000000 ) ) ; +#1022 = CARTESIAN_POINT ( 'NONE', ( 20.83854657404687000, -24.63446484557479000, 40.30864583454236800 ) ) ; +#1023 = ORIENTED_EDGE ( 'NONE', *, *, #2690, .T. ) ; +#1024 = CARTESIAN_POINT ( 'NONE', ( 20.35150738200112000, -15.30543356752763300, 40.22595147222784100 ) ) ; +#1025 = EDGE_CURVE ( 'NONE', #2502, #944, #1178, .T. ) ; +#1026 = TOROIDAL_SURFACE ( 'NONE', #1055, 7.199000000000000700, 2.500000000000000000 ) ; +#1027 = CARTESIAN_POINT ( 'NONE', ( 20.49051925126211400, -12.50354485049102800, 39.89124554043247200 ) ) ; +#1028 = ORIENTED_EDGE ( 'NONE', *, *, #1067, .F. ) ; +#1029 = CIRCLE ( 'NONE', #2837, 2.499999999999998700 ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( 19.69501087831585600, -24.69899999999979900, 37.47484168932485500 ) ) ; +#1031 = CIRCLE ( 'NONE', #862, 4.953000000000000300 ) ; +#1032 = VERTEX_POINT ( 'NONE', #1021 ) ; +#1033 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1034 = CARTESIAN_POINT ( 'NONE', ( 21.99486412396646200, -24.26494392579922300, 37.18647590509478100 ) ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( 4.698999999998672000, -39.69501087830217000, 37.47484168932597000 ) ) ; +#1036 = DIRECTION ( 'NONE', ( -0.5363214786510106500, -0.8440137863433235800, 0.0000000000000000000 ) ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -54.79019945774904700, 0.0000000000000000000 ) ) ; +#1038 = DIRECTION ( 'NONE', ( 8.981761644946041100E-015, -0.8574929257125434300, -0.5144957554275280100 ) ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000700, -17.50000000000010700, 0.0000000000000000000 ) ) ; +#1040 = EDGE_CURVE ( 'NONE', #2185, #2502, #1114, .T. ) ; +#1041 = DIRECTION ( 'NONE', ( -0.5363214786510165400, 0.8440137863433196900, 0.0000000000000000000 ) ) ; +#1042 = CARTESIAN_POINT ( 'NONE', ( 4.685737593187184300, -39.47063019258204300, 40.07780935511154800 ) ) ; +#1043 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1044 = VERTEX_POINT ( 'NONE', #2624 ) ; +#1045 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001800, -15.30100000000006900, 17.37200000000000000 ) ) ; +#1046 = CARTESIAN_POINT ( 'NONE', ( 24.69899999999999800, -19.99999999999979400, 37.17038346254926800 ) ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231582800, -74.86089611231602700, 40.00000000000000000 ) ) ; +#1048 = EDGE_LOOP ( 'NONE', ( #304, #298, #1328, #1460, #389 ) ) ; +#1049 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1050 = ORIENTED_EDGE ( 'NONE', *, *, #1207, .T. ) ; +#1051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1052 = CARTESIAN_POINT ( 'NONE', ( -20.88450869726809600, -15.36409336194431000, 37.31637200410991500 ) ) ; +#1053 = EDGE_LOOP ( 'NONE', ( #994, #2233, #445, #475 ) ) ; +#1054 = CARTESIAN_POINT ( 'NONE', ( 34.79019945774901100, -17.49999999999964100, 3.000000000000018200 ) ) ; +#1055 = AXIS2_PLACEMENT_3D ( 'NONE', #1322, #724, #2264 ) ; +#1056 = LINE ( 'NONE', #2767, #992 ) ; +#1057 = VERTEX_POINT ( 'NONE', #2104 ) ; +#1058 = CIRCLE ( 'NONE', #1312, 50.00000000000000000 ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( 7.371033944928818500, -0.3660431946287109900, 39.96852174381999100 ) ) ; +#1060 = VECTOR ( 'NONE', #1606, 1000.000000000000000 ) ; +#1061 = VERTEX_POINT ( 'NONE', #821 ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( 6.936342272455263500, -43.87385472870978000, 39.56051128311409600 ) ) ; +#1063 = FACE_OUTER_BOUND ( 'NONE', #2152, .T. ) ; +#1064 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999997800, -20.00000000000000000, 40.00000000000000000 ) ) ; +#1065 = CARTESIAN_POINT ( 'NONE', ( 4.693592464893365300, -40.27034503219809400, 37.40643411029606100 ) ) ; +#1066 = PLANE ( 'NONE', #437 ) ; +#1067 = EDGE_CURVE ( 'NONE', #917, #600, #1029, .T. ) ; +#1068 = ADVANCED_FACE ( 'NONE', ( #1063 ), #918, .F. ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 4.494143236640285400, -41.43284441538723000, 40.41392066168023000 ) ) ; +#1070 = ORIENTED_EDGE ( 'NONE', *, *, #2589, .T. ) ; +#1071 = ORIENTED_EDGE ( 'NONE', *, *, #57, .T. ) ; +#1072 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -54.79019945774904700, 40.00000000000000000 ) ) ; +#1073 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -54.79019945774904700, 0.0000000000000000000 ) ) ; +#1074 = EDGE_LOOP ( 'NONE', ( #1324, #2438, #180, #1862 ) ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( -4.646542926175369500, -40.71588041606912600, 37.34391334530541000 ) ) ; +#1076 = CARTESIAN_POINT ( 'NONE', ( 4.679575101492159400, -40.51850427845368300, 40.25394205035954800 ) ) ; +#1077 = ORIENTED_EDGE ( 'NONE', *, *, #39, .F. ) ; +#1078 = FACE_OUTER_BOUND ( 'NONE', #431, .T. ) ; +#1079 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ; +#1080 = FACE_OUTER_BOUND ( 'NONE', #1290, .T. ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( -28.04482217976522700, -7.339793204850257000, 40.00000000000000000 ) ) ; +#1082 = DIRECTION ( 'NONE', ( 1.040834085586083900E-014, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1083 = EDGE_CURVE ( 'NONE', #2858, #2275, #995, .T. ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( -6.694717353275221300, -44.25410196865985300, 39.56051128339901600 ) ) ; +#1085 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1073, #2435, #35, #1472 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.403348247575207000, 1.738244406014585600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9906755314555129000, 0.9906755314555129000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1086 = CIRCLE ( 'NONE', #1620, 4.953000000000000300 ) ; +#1087 = VERTEX_POINT ( 'NONE', #611 ) ; +#1088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1089 = EDGE_CURVE ( 'NONE', #554, #2474, #884, .T. ) ; +#1090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1091 = CARTESIAN_POINT ( 'NONE', ( -7.346597300402527800, -0.4666668591416876500, 39.97468994010727500 ) ) ; +#1092 = CARTESIAN_POINT ( 'NONE', ( 22.26878270547906500, -15.87423433004999200, 37.17038346231495200 ) ) ; +#1093 = CARTESIAN_POINT ( 'NONE', ( 4.197593986929042000, 2.131379333777856400, 40.53086125769102200 ) ) ; +#1094 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231611900, -74.86089611231555800, 30.00000000000000000 ) ) ; +#1096 = CARTESIAN_POINT ( 'NONE', ( 12.66020679514987500, -48.04482217976512700, 0.0000000000000000000 ) ) ; +#1097 = VERTEX_POINT ( 'NONE', #1039 ) ; +#1098 = VERTEX_POINT ( 'NONE', #2888 ) ; +#1099 = CARTESIAN_POINT ( 'NONE', ( -6.694717353275236400, 4.254101968659828300, 39.56051128339901600 ) ) ; +#1100 = CARTESIAN_POINT ( 'NONE', ( -19.99999999997951500, -24.69900000000007300, 37.43962887310161100 ) ) ; +#1101 = ADVANCED_FACE ( 'NONE', ( #1080 ), #1439, .T. ) ; +#1102 = ORIENTED_EDGE ( 'NONE', *, *, #1715, .F. ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( -7.511159754144501700, -40.64432878848899100, 39.87542036636912000 ) ) ; +#1104 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1105 = VERTEX_POINT ( 'NONE', #1242 ) ; +#1106 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005300, -24.95299999999979000, 0.0000000000000000000 ) ) ; +#1107 = FACE_OUTER_BOUND ( 'NONE', #2832, .T. ) ; +#1108 = ORIENTED_EDGE ( 'NONE', *, *, #590, .F. ) ; +#1109 = FACE_BOUND ( 'NONE', #412, .T. ) ; +#1110 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#1111 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1112 = TOROIDAL_SURFACE ( 'NONE', #768, 4.799000000000000400, 0.1000000000000000100 ) ; +#1113 = ORIENTED_EDGE ( 'NONE', *, *, #861, .F. ) ; +#1114 = CIRCLE ( 'NONE', #2842, 7.199000000000000700 ) ; +#1115 = CARTESIAN_POINT ( 'NONE', ( 4.799000000000000400, 5.877079989108149200E-016, 17.27199999999999800 ) ) ; +#1116 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1635, #2132, #645 ), + ( #2149, #844, #2410 ), + ( #1059, #2667, #1256 ), + ( #18, #1452, #228 ), + ( #1654, #443, #1895 ), + ( #647, #2166, #1286 ), + ( #49, #1486, #253 ), + ( #1690, #478, #1933 ), + ( #680, #2208, #885 ), + ( #2463, #1093, #2721 ), + ( #1296, #59, #1492 ), + ( #265, #1698, #483 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.301042606982605300E-017, 0.001366589151724500900, 0.002049883727586744900, 0.002733178303448988800, 0.004099767455173476900, 0.005466356606897964500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865482400, 1.000000000000000000), + ( 1.000000000000000000, 0.6962804023093928100, 1.000000000000000000), + ( 1.000000000000000000, 0.6838643731093073700, 1.000000000000000000), + ( 1.000000000000000000, 0.6648240515469415700, 1.000000000000000000), + ( 1.000000000000000000, 0.6584081091808621200, 1.000000000000000000), + ( 1.000000000000000000, 0.6458021328467699100, 1.000000000000000000), + ( 1.000000000000000000, 0.6395921105352708700, 1.000000000000000000), + ( 1.000000000000000000, 0.6222527413819880500, 1.000000000000000000), + ( 1.000000000000000000, 0.6123144868093755000, 1.000000000000000000), + ( 1.000000000000000000, 0.5983896303522731100, 1.000000000000000000), + ( 1.000000000000000000, 0.5944228552562016400, 1.000000000000000000), + ( 1.000000000000000000, 0.5944745579080732400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1117 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.047444401652940000E-014, -0.0000000000000000000 ) ) ; +#1118 = EDGE_CURVE ( 'NONE', #139, #2876, #999, .T. ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( -23.37584720577181200, -12.83592019293919500, 39.58639012268041300 ) ) ; +#1120 = DIRECTION ( 'NONE', ( -0.8440137863433226900, 0.5363214786510119800, 0.0000000000000000000 ) ) ; +#1121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1122 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 14.79019945774904000, 3.000000000000002700 ) ) ; +#1123 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999000, -39.69501087831582000, 37.47484168932486200 ) ) ; +#1124 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -54.79019945774904700, 0.0000000000000000000 ) ) ; +#1127 = ADVANCED_FACE ( 'NONE', ( #856 ), #757, .F. ) ; +#1128 = VERTEX_POINT ( 'NONE', #2783 ) ; +#1129 = AXIS2_PLACEMENT_3D ( 'NONE', #2567, #1175, #2815 ) ; +#1130 = ORIENTED_EDGE ( 'NONE', *, *, #2414, .F. ) ; +#1131 = DIRECTION ( 'NONE', ( -0.5363214786510192000, 0.8440137863433183600, 0.0000000000000000000 ) ) ; +#1132 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1133 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1134 = CARTESIAN_POINT ( 'NONE', ( 6.694717353275258600, -44.25410196865979600, 39.56051128339901600 ) ) ; +#1135 = EDGE_LOOP ( 'NONE', ( #1799, #1533, #2020 ) ) ; +#1136 = CARTESIAN_POINT ( 'NONE', ( -22.57359056983909400, -12.59438387157467400, 39.65590563316180800 ) ) ; +#1137 = ORIENTED_EDGE ( 'NONE', *, *, #1827, .F. ) ; +#1138 = CARTESIAN_POINT ( 'NONE', ( 27.19900000000000200, -19.99999999999979400, 37.17038346254926800 ) ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#1140 = ORIENTED_EDGE ( 'NONE', *, *, #162, .F. ) ; +#1141 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1142 = TOROIDAL_SURFACE ( 'NONE', #527, 4.999999999999999100, 10.00000000000000000 ) ; +#1143 = VERTEX_POINT ( 'NONE', #1149 ) ; +#1144 = VECTOR ( 'NONE', #1863, 1000.000000000000000 ) ; +#1145 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 37.50000000000000000 ) ) ; +#1146 = DATE_TIME_ROLE ( 'creation_date' ) ; +#1147 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999998200, -24.79900000000007100, 17.37200000000000000 ) ) ; +#1148 = CYLINDRICAL_SURFACE ( 'NONE', #2814, 3.749999999999997800 ) ; +#1149 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, 6.065675596176840400E-016, 17.27199999999999800 ) ) ; +#1150 = EDGE_CURVE ( 'NONE', #2150, #239, #955, .T. ) ; +#1151 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1152 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1153 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( 19.99999999997950100, -15.30099999999979200, 37.43962887310161100 ) ) ; +#1155 = CARTESIAN_POINT ( 'NONE', ( -34.79019945774903300, -22.50000000000011700, 3.000000000000018200 ) ) ; +#1156 = ADVANCED_FACE ( 'NONE', ( #832 ), #690, .F. ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.27199999999999800 ) ) ; +#1158 = DIRECTION ( 'NONE', ( -1.050710766793947400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1159 = ORIENTED_EDGE ( 'NONE', *, *, #1331, .T. ) ; +#1160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1161 = PLANE ( 'NONE', #2242 ) ; +#1162 = EDGE_LOOP ( 'NONE', ( #1476, #2784, #2218, #1793 ) ) ; +#1163 = CARTESIAN_POINT ( 'NONE', ( -12.66020679514984000, 8.044822179765180400, 0.0000000000000000000 ) ) ; +#1164 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( 22.13139152251597300, -15.80626985195279100, 37.17917958233368800 ) ) ; +#1166 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, -40.00000000000000000, 17.27199999999999800 ) ) ; +#1167 = ORIENTED_EDGE ( 'NONE', *, *, #1089, .F. ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( 35.07059174458554200, -20.84117686050914400, 0.9952938836943073800 ) ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.27199999999999800 ) ) ; +#1170 = ORIENTED_EDGE ( 'NONE', *, *, #822, .F. ) ; +#1171 = ADVANCED_FACE ( 'NONE', ( #913, #714 ), #957, .T. ) ; +#1172 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1173 = VERTEX_POINT ( 'NONE', #2798 ) ; +#1174 = CIRCLE ( 'NONE', #1240, 10.00000000000000200 ) ; +#1175 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( -4.799000000000000400, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#1177 = ORIENTED_EDGE ( 'NONE', *, *, #465, .T. ) ; +#1178 = CIRCLE ( 'NONE', #2854, 7.199000000000000700 ) ; +#1179 = CARTESIAN_POINT ( 'NONE', ( -21.72519634692798400, -24.37651687320386900, 37.21134763931961200 ) ) ; +#1180 = VECTOR ( 'NONE', #402, 1000.000000000000000 ) ; +#1181 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 0.0000000000000000000 ) ) ; +#1182 = VERTEX_POINT ( 'NONE', #1785 ) ; +#1183 = LINE ( 'NONE', #1004, #1180 ) ; +#1184 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1185 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1186 = CARTESIAN_POINT ( 'NONE', ( -22.68160739325507400, -15.77993106828346500, 30.00000000000000000 ) ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( -19.83840337468950200, -24.71080174022274900, 40.13955959772278700 ) ) ; +#1188 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1189 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.00000000000000000, -0.001000000000001000100 ) ) ; +#1190 = CARTESIAN_POINT ( 'NONE', ( 12.66020679514987700, -48.04482217976512700, 30.00000000000000000 ) ) ; +#1191 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1194 = CARTESIAN_POINT ( 'NONE', ( -21.39265834089582400, -27.53361732139791200, 39.79162264665480800 ) ) ; +#1195 = CARTESIAN_POINT ( 'NONE', ( 4.376516873203803100, -41.72519634692797300, 37.21134763931960500 ) ) ; +#1196 = CARTESIAN_POINT ( 'NONE', ( -4.086678575170327400, -42.33029440727584400, 37.17038346254926800 ) ) ; +#1197 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1198 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ; +#1199 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1200 = ADVANCED_FACE ( 'NONE', ( #660 ), #718, .T. ) ; +#1201 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, -39.99999999997954300, 37.43962887310160400 ) ) ; +#1202 = ORIENTED_EDGE ( 'NONE', *, *, #2635, .T. ) ; +#1203 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231598400, 34.86089611231578500, 0.0000000000000000000 ) ) ; +#1204 = EDGE_LOOP ( 'NONE', ( #1754, #1294, #1488, #2779 ) ) ; +#1205 = CARTESIAN_POINT ( 'NONE', ( -22.52017462818111000, -23.96602078202733900, 37.17038346254926800 ) ) ; +#1206 = DIRECTION ( 'NONE', ( -1.047444401652940000E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1207 = EDGE_CURVE ( 'NONE', #2100, #2642, #667, .T. ) ; +#1208 = ORIENTED_EDGE ( 'NONE', *, *, #2062, .F. ) ; +#1209 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#1210 = CARTESIAN_POINT ( 'NONE', ( 20.49259776320148400, -27.50780163073167000, 39.89453105888362900 ) ) ; +#1211 = ORIENTED_EDGE ( 'NONE', *, *, #109, .T. ) ; +#1212 = VERTEX_POINT ( 'NONE', #341 ) ; +#1213 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 37.50000000000000000 ) ) ; +#1214 = FACE_OUTER_BOUND ( 'NONE', #1980, .T. ) ; +#1215 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999997800, -20.00000000000000000, 0.0000000000000000000 ) ) ; +#1216 = CIRCLE ( 'NONE', #2352, 0.1000000000000002600 ) ; +#1217 = CARTESIAN_POINT ( 'NONE', ( 19.37975755574571600, -24.66766731690460500, 37.49999999444552400 ) ) ; +#1218 = CIRCLE ( 'NONE', #70, 7.199000000000000700 ) ; +#1219 = CARTESIAN_POINT ( 'NONE', ( -25.00000000000000000, -20.00000000000007100, 30.00000000000000000 ) ) ; +#1220 = ORIENTED_EDGE ( 'NONE', *, *, #2260, .F. ) ; +#1221 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1222 = PLANE ( 'NONE', #2240 ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( -6.694717353275235500, 4.254101968659826500, 39.56051128339901600 ) ) ; +#1224 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 40.00000000000000000 ) ) ; +#1225 = EDGE_CURVE ( 'NONE', #710, #1248, #800, .T. ) ; +#1226 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #627, #1864, #1243, #2890 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009204074736004646600 ), + .UNSPECIFIED. ) ; +#1227 = CARTESIAN_POINT ( 'NONE', ( 21.39040766670424500, -27.53366583298605600, 39.79188446163865200 ) ) ; +#1228 = CARTESIAN_POINT ( 'NONE', ( 20.27034503219887900, -15.30640753510649800, 37.40643411029606100 ) ) ; +#1229 = CARTESIAN_POINT ( 'NONE', ( 21.22155115697170700, -12.46428113911097800, 39.81142960067295900 ) ) ; +#1230 = EDGE_CURVE ( 'NONE', #1061, #2143, #934, .T. ) ; +#1231 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1232 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231611900, -74.86089611231555800, 40.00000000000000000 ) ) ; +#1233 = EDGE_CURVE ( 'NONE', #2810, #518, #643, .T. ) ; +#1234 = ORIENTED_EDGE ( 'NONE', *, *, #1424, .T. ) ; +#1235 = CARTESIAN_POINT ( 'NONE', ( 22.32925401946058500, -24.08733968124220200, 40.55200177145804500 ) ) ; +#1236 = EDGE_LOOP ( 'NONE', ( #625, #2214, #2470, #96 ) ) ; +#1237 = ORIENTED_EDGE ( 'NONE', *, *, #2584, .F. ) ; +#1238 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999994700, -15.04699999999979300, 0.0000000000000000000 ) ) ; +#1239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1240 = AXIS2_PLACEMENT_3D ( 'NONE', #2338, #1002, #2598 ) ; +#1241 = ORIENTED_EDGE ( 'NONE', *, *, #2619, .T. ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( 24.25410196865987100, -26.69471735327500300, 39.56051128339901600 ) ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( -19.69501087831582700, -15.30100000000006800, 37.47484168932486200 ) ) ; +#1244 = EDGE_LOOP ( 'NONE', ( #1237, #2583, #77 ) ) ; +#1245 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 37.50000000000000000 ) ) ; +#1246 = FACE_OUTER_BOUND ( 'NONE', #2710, .T. ) ; +#1247 = CARTESIAN_POINT ( 'NONE', ( -15.30100000000000000, -20.00000000000007100, 37.50000000000000000 ) ) ; +#1248 = VERTEX_POINT ( 'NONE', #968 ) ; +#1249 = FACE_OUTER_BOUND ( 'NONE', #1053, .T. ) ; +#1250 = CIRCLE ( 'NONE', #1280, 50.00000000000000000 ) ; +#1251 = CARTESIAN_POINT ( 'NONE', ( 7.060753650650973200, -1.404050883985263900, 40.00000000000000000 ) ) ; +#1252 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1253 = DIRECTION ( 'NONE', ( -0.5363214786510159800, 0.8440137863433202500, -1.395554189529766800E-016 ) ) ; +#1254 = CARTESIAN_POINT ( 'NONE', ( 4.085816667084019500, -42.33165079996548700, 40.55200177192274000 ) ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 39.56051128339900900 ) ) ; +#1256 = CARTESIAN_POINT ( 'NONE', ( 4.697191125804662800, -0.3240242418352781700, 37.47639130574683700 ) ) ; +#1257 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 0.0000000000000000000 ) ) ; +#1258 = EDGE_CURVE ( 'NONE', #1777, #66, #505, .T. ) ; +#1259 = CARTESIAN_POINT ( 'NONE', ( 7.223284537381237800, -0.9369436286089606300, 40.00000000000000700 ) ) ; +#1260 = ORIENTED_EDGE ( 'NONE', *, *, #1994, .F. ) ; +#1261 = VERTEX_POINT ( 'NONE', #2059 ) ; +#1262 = CARTESIAN_POINT ( 'NONE', ( 6.694717353275258600, -44.25410196865979600, 39.56051128339900900 ) ) ; +#1263 = ORIENTED_EDGE ( 'NONE', *, *, #1820, .T. ) ; +#1264 = ADVANCED_FACE ( 'NONE', ( #470 ), #390, .F. ) ; +#1265 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1582, #1384, #1811, #578 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002695499024224073800, 0.003629634443215529000 ), + .UNSPECIFIED. ) ; +#1266 = ORIENTED_EDGE ( 'NONE', *, *, #1392, .T. ) ; +#1267 = CARTESIAN_POINT ( 'NONE', ( 7.347079310444722300, -0.4648370170087534100, 39.97459144026986200 ) ) ; +#1268 = EDGE_CURVE ( 'NONE', #1212, #2423, #897, .T. ) ; +#1269 = CARTESIAN_POINT ( 'NONE', ( -22.68160739325507100, -24.22006893171668600, 30.00000000000000000 ) ) ; +#1270 = CIRCLE ( 'NONE', #869, 4.698999999999999800 ) ; +#1271 = ORIENTED_EDGE ( 'NONE', *, *, #1595, .F. ) ; +#1272 = CARTESIAN_POINT ( 'NONE', ( 3.966020782027281000, -42.52017462818109500, 40.55200177161795900 ) ) ; +#1273 = CIRCLE ( 'NONE', #1948, 0.09999999999999939500 ) ; +#1274 = TOROIDAL_SURFACE ( 'NONE', #1419, 4.799000000000000400, 0.1000000000000000100 ) ; +#1275 = ORIENTED_EDGE ( 'NONE', *, *, #53, .F. ) ; +#1276 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1277 = CARTESIAN_POINT ( 'NONE', ( -4.494640095631442700, -41.43127044451478700, 40.41363463513749100 ) ) ; +#1278 = ADVANCED_FACE ( 'NONE', ( #575 ), #2076, .T. ) ; +#1279 = CARTESIAN_POINT ( 'NONE', ( 7.486051149684765700, -40.39475029890805000, 39.90112219381975200 ) ) ; +#1280 = AXIS2_PLACEMENT_3D ( 'NONE', #2167, #1896, #1866 ) ; +#1281 = CARTESIAN_POINT ( 'NONE', ( 7.507801630731874500, 0.4925977632015102200, 39.89453105888362200 ) ) ; +#1282 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#1283 = CARTESIAN_POINT ( 'NONE', ( -3.966020782027263700, -42.52017462818111700, 37.17038346254926800 ) ) ; +#1284 = CARTESIAN_POINT ( 'NONE', ( 20.99427497393572800, -15.39656065886727600, 40.33585679829688800 ) ) ; +#1285 = EDGE_LOOP ( 'NONE', ( #1498, #1744, #687, #681 ) ) ; +#1286 = CARTESIAN_POINT ( 'NONE', ( 4.667106161888182400, 0.5665495460864580200, 37.36558844647157000 ) ) ; +#1287 = ADVANCED_FACE ( 'NONE', ( #418 ), #534, .T. ) ; +#1288 = ORIENTED_EDGE ( 'NONE', *, *, #2418, .F. ) ; +#1289 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.37200000000000000 ) ) ; +#1290 = EDGE_LOOP ( 'NONE', ( #2860, #2677, #1904, #1634 ) ) ; +#1291 = CARTESIAN_POINT ( 'NONE', ( -7.496455149508761900, 0.4905192512621189800, 39.89124554043247200 ) ) ; +#1292 = EDGE_CURVE ( 'NONE', #1143, #3, #613, .T. ) ; +#1293 = CARTESIAN_POINT ( 'NONE', ( 23.87385472871426700, -13.06365772753970900, 39.56051128311210600 ) ) ; +#1294 = ORIENTED_EDGE ( 'NONE', *, *, #2584, .T. ) ; +#1295 = ORIENTED_EDGE ( 'NONE', *, *, #2046, .F. ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( 6.939420617011439400, 3.869010309219014700, 39.56051128341463400 ) ) ; +#1297 = CARTESIAN_POINT ( 'NONE', ( -19.69501087830215600, -24.69899999999874000, 37.47484168932597000 ) ) ; +#1298 = CIRCLE ( 'NONE', #256, 3.749999999999997800 ) ; +#1299 = VECTOR ( 'NONE', #1, 1000.000000000000000 ) ; +#1300 = CARTESIAN_POINT ( 'NONE', ( -4.608762523184972300, -39.08353450425796900, 40.00000000000000000 ) ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( -7.164079807060875100, -43.37584720577181200, 39.58639012268041300 ) ) ; +#1302 = LINE ( 'NONE', #98, #1299 ) ; +#1303 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 37.17038346254926800 ) ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 37.17038346254926800 ) ) ; +#1305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1306 = CARTESIAN_POINT ( 'NONE', ( -4.693645331681951300, -40.26935444099849800, 37.40656527383598000 ) ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 3.282765312563869300E-016, 37.43962887309924500 ) ) ; +#1308 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.27199999999999800 ) ) ; +#1309 = CARTESIAN_POINT ( 'NONE', ( -2.499999999999962700, 9.999999999999998200, 3.000000000000000000 ) ) ; +#1310 = ADVANCED_FACE ( 'NONE', ( #294 ), #1008, .F. ) ; +#1311 = EDGE_CURVE ( 'NONE', #1044, #107, #811, .T. ) ; +#1312 = AXIS2_PLACEMENT_3D ( 'NONE', #928, #2514, #1132 ) ; +#1313 = EDGE_LOOP ( 'NONE', ( #189, #1220, #1712, #642 ) ) ; +#1314 = DIRECTION ( 'NONE', ( 0.9807964509863734700, 0.1950341552973085500, -0.0000000000000000000 ) ) ; +#1315 = ORIENTED_EDGE ( 'NONE', *, *, #822, .T. ) ; +#1316 = CARTESIAN_POINT ( 'NONE', ( -21.96386351287863900, -12.49176178868373700, 39.72549349159630300 ) ) ; +#1317 = CARTESIAN_POINT ( 'NONE', ( -12.80100000000000000, -20.00000000000007100, 40.00000000000000000 ) ) ; +#1318 = EDGE_LOOP ( 'NONE', ( #1137, #1159, #1202, #2355, #1241, #1266, #1315 ) ) ; +#1319 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #770, #2578, #2825 ), + ( #1385, #159, #1583 ), + ( #377, #1813, #579 ), + ( #2069, #780, #606 ), + ( #2760, #1325, #91 ), + ( #1522, #303, #1739 ), + ( #514, #1990, #716 ), + ( #2254, #931, #2519 ), + ( #1136, #2769, #1337 ), + ( #104, #1531, #311 ), + ( #1804, #565, #2055 ), + ( #769, #2317, #981 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.105886215935214500E-017, 0.001366589151724500700, 0.002049883727586745400, 0.002733178303448990100, 0.004099767455173479500, 0.005466356606897968900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865485700, 1.000000000000000000), + ( 1.000000000000000000, 0.6962804023094110200, 1.000000000000000000), + ( 1.000000000000000000, 0.6838643731092822800, 1.000000000000000000), + ( 1.000000000000000000, 0.6648240515469544500, 1.000000000000000000), + ( 1.000000000000000000, 0.6584081091807477700, 1.000000000000000000), + ( 1.000000000000000000, 0.6458021328468849200, 1.000000000000000000), + ( 1.000000000000000000, 0.6395921105352580000, 1.000000000000000000), + ( 1.000000000000000000, 0.6222527413820133600, 1.000000000000000000), + ( 1.000000000000000000, 0.6123144868093507400, 1.000000000000000000), + ( 1.000000000000000000, 0.5983896303522989700, 1.000000000000000000), + ( 1.000000000000000000, 0.5944228552561825500, 1.000000000000000000), + ( 1.000000000000000000, 0.5944745579080740200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1320 = EDGE_LOOP ( 'NONE', ( #2111, #1477, #2495 ) ) ; +#1321 = EDGE_CURVE ( 'NONE', #1693, #2013, #337, .T. ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 37.50000000000000000 ) ) ; +#1323 = CIRCLE ( 'NONE', #965, 2.500000000000000000 ) ; +#1324 = ORIENTED_EDGE ( 'NONE', *, *, #2737, .F. ) ; +#1325 = CARTESIAN_POINT ( 'NONE', ( -20.51739879649587600, -15.32031234412905200, 40.25375557150043400 ) ) ; +#1326 = FACE_OUTER_BOUND ( 'NONE', #896, .T. ) ; +#1327 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1328 = ORIENTED_EDGE ( 'NONE', *, *, #141, .F. ) ; +#1329 = CIRCLE ( 'NONE', #179, 4.799000000000001300 ) ; +#1330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1331 = EDGE_CURVE ( 'NONE', #500, #1613, #790, .T. ) ; +#1332 = CARTESIAN_POINT ( 'NONE', ( 7.544959020164742300, 0.9803242559710989600, 39.83936141413543900 ) ) ; +#1333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1334 = DIRECTION ( 'NONE', ( -1.047444401652940000E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1335 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1530 ) ; +#1336 = CARTESIAN_POINT ( 'NONE', ( -19.08353450425797200, -15.39123747681509600, 37.50000000000000000 ) ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( -21.44066269637579200, -15.51739801470483100, 37.24192922384393300 ) ) ; +#1338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1339 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1340 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1341 = CARTESIAN_POINT ( 'NONE', ( -34.79019945774903300, -22.50000000000012100, 40.00000000000000000 ) ) ; +#1342 = APPROVAL_ROLE ( '' ) ; +#1343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1345 = CARTESIAN_POINT ( 'NONE', ( -34.79019945774903300, -22.50000000000011700, 3.000000000000018200 ) ) ; +#1346 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 0.0000000000000000000 ) ) ; +#1347 = ORIENTED_EDGE ( 'NONE', *, *, #2286, .T. ) ; +#1348 = EDGE_CURVE ( 'NONE', #1057, #2346, #386, .T. ) ; +#1349 = ORIENTED_EDGE ( 'NONE', *, *, #1580, .F. ) ; +#1350 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 37.17038346254926800 ) ) ; +#1351 = ADVANCED_FACE ( 'NONE', ( #2433 ), #108, .F. ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( 7.164079807060859100, 3.375847205771846500, 39.58639012268041300 ) ) ; +#1353 = VERTEX_POINT ( 'NONE', #381 ) ; +#1354 = ORIENTED_EDGE ( 'NONE', *, *, #292, .F. ) ; +#1355 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 40.00000000000000000 ) ) ; +#1356 = EDGE_CURVE ( 'NONE', #3, #954, #240, .T. ) ; +#1357 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .T. ) ; +#1358 = CARTESIAN_POINT ( 'NONE', ( 6.961483047751626100, 3.834290469728556200, 39.56051128339902300 ) ) ; +#1359 = CARTESIAN_POINT ( 'NONE', ( 28.04482217976515900, -7.339793204849938100, 40.00000000000000000 ) ) ; +#1360 = VECTOR ( 'NONE', #156, 1000.000000000000000 ) ; +#1361 = EDGE_LOOP ( 'NONE', ( #2388, #2676, #1630, #1873, #1347, #2818 ) ) ; +#1362 = FACE_OUTER_BOUND ( 'NONE', #366, .T. ) ; +#1363 = DIRECTION ( 'NONE', ( 3.691686477924681800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1364 = CARTESIAN_POINT ( 'NONE', ( -23.86097832480863800, -26.07605524788564800, 37.17038346254926800 ) ) ; +#1365 = VECTOR ( 'NONE', #200, 1000.000000000000000 ) ; +#1366 = AXIS2_PLACEMENT_3D ( 'NONE', #1598, #1597, #1589 ) ; +#1367 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1368 = CARTESIAN_POINT ( 'NONE', ( 21.51811602493685200, -15.54755449411105600, 37.23454346966065700 ) ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( 7.060753650650917200, -1.404050883985239000, 37.50000000000000000 ) ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.27199999999999800 ) ) ; +#1371 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1372 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.37200000000000000 ) ) ; +#1373 = CARTESIAN_POINT ( 'NONE', ( -18.59594911601469700, -12.93924634934910000, 40.00000000000000000 ) ) ; +#1374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000700, -17.50000000000010700, 3.000000000000000000 ) ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( -20.88450869725472000, -24.63590663805870700, 37.31637200411186900 ) ) ; +#1377 = DIRECTION ( 'NONE', ( -1.050710766793947400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1378 = ADVANCED_FACE ( 'NONE', ( #182 ), #44, .F. ) ; +#1379 = ORIENTED_EDGE ( 'NONE', *, *, #208, .F. ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00000000000000000 ) ) ; +#1381 = DIRECTION ( 'NONE', ( -0.5363214786510152000, 0.8440137863433205800, 0.0000000000000000000 ) ) ; +#1382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1383 = ORIENTED_EDGE ( 'NONE', *, *, #1917, .T. ) ; +#1384 = CARTESIAN_POINT ( 'NONE', ( 19.69501087830214200, -15.30100000000112300, 37.47484168932597000 ) ) ; +#1385 = CARTESIAN_POINT ( 'NONE', ( -19.11946895514712700, -12.75708659532881500, 40.00000000000000000 ) ) ; +#1386 = CARTESIAN_POINT ( 'NONE', ( -20.12179417283574200, -24.69976624447969700, 37.42584164642439500 ) ) ; +#1387 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231611900, -74.86089611231555800, 40.00000000000000000 ) ) ; +#1388 = EDGE_CURVE ( 'NONE', #1705, #2064, #102, .T. ) ; +#1389 = ORIENTED_EDGE ( 'NONE', *, *, #1402, .T. ) ; +#1390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1391 = VERTEX_POINT ( 'NONE', #2847 ) ; +#1392 = EDGE_CURVE ( 'NONE', #2146, #1574, #43, .T. ) ; +#1393 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231568600, 34.86089611231624700, 40.00000000000000000 ) ) ; +#1394 = ORIENTED_EDGE ( 'NONE', *, *, #901, .F. ) ; +#1395 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #309, #2757, #1123, #1751 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009204074736004431900 ), + .UNSPECIFIED. ) ; +#1396 = CARTESIAN_POINT ( 'NONE', ( 3.966020782027287300, -42.52017462818108100, 37.17038346254926000 ) ) ; +#1397 = CIRCLE ( 'NONE', #682, 2.500000000000002200 ) ; +#1398 = CARTESIAN_POINT ( 'NONE', ( -21.43284441539058300, -24.49414323664032600, 40.41392066168186400 ) ) ; +#1399 = ORIENTED_EDGE ( 'NONE', *, *, #1225, .T. ) ; +#1400 = LINE ( 'NONE', #166, #1360 ) ; +#1401 = ADVANCED_FACE ( 'NONE', ( #78 ), #186, .T. ) ; +#1402 = EDGE_CURVE ( 'NONE', #2077, #1574, #2884, .T. ) ; +#1403 = CARTESIAN_POINT ( 'NONE', ( 4.635906638058634700, -40.88450869725471600, 37.31637200411186200 ) ) ; +#1404 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1405 = VECTOR ( 'NONE', #177, 1000.000000000000000 ) ; +#1406 = ORIENTED_EDGE ( 'NONE', *, *, #750, .F. ) ; +#1407 = LINE ( 'NONE', #194, #1405 ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 40.00000000000000000 ) ) ; +#1409 = DIRECTION ( 'NONE', ( 0.5363214786510084300, 0.8440137863433251300, -0.0000000000000000000 ) ) ; +#1410 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1411 = EDGE_CURVE ( 'NONE', #2462, #1087, #2878, .T. ) ; +#1412 = CARTESIAN_POINT ( 'NONE', ( -24.25410196865982800, -26.69471735327529800, 39.56051128339901600 ) ) ; +#1413 = CARTESIAN_POINT ( 'NONE', ( 19.06305637139100300, -27.22328453738103000, 40.00000000000000700 ) ) ; +#1414 = CARTESIAN_POINT ( 'NONE', ( 19.83778086937993400, -24.71075904390296800, 40.13945356267841900 ) ) ; +#1415 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1416 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 37.17038346254926800 ) ) ; +#1417 = ORIENTED_EDGE ( 'NONE', *, *, #172, .F. ) ; +#1418 = VERTEX_POINT ( 'NONE', #1841 ) ; +#1419 = AXIS2_PLACEMENT_3D ( 'NONE', #1887, #446, #457 ) ; +#1420 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1421 = ORIENTED_EDGE ( 'NONE', *, *, #626, .T. ) ; +#1422 = CARTESIAN_POINT ( 'NONE', ( 20.71588041606873200, -24.64654292617523600, 37.34391334530541000 ) ) ; +#1423 = CARTESIAN_POINT ( 'NONE', ( 20.64600045540707300, -12.48869371596865800, 39.87524548164956400 ) ) ; +#1424 = EDGE_CURVE ( 'NONE', #1894, #2022, #2887, .T. ) ; +#1425 = ORIENTED_EDGE ( 'NONE', *, *, #1258, .F. ) ; +#1426 = ORIENTED_EDGE ( 'NONE', *, *, #1442, .F. ) ; +#1427 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1428 = CIRCLE ( 'NONE', #312, 4.799000000000001300 ) ; +#1429 = DIRECTION ( 'NONE', ( 0.1950341552973116600, -0.9807964509863726900, 0.0000000000000000000 ) ) ; +#1430 = ORIENTED_EDGE ( 'NONE', *, *, #1905, .T. ) ; +#1431 = CIRCLE ( 'NONE', #2880, 4.698999999999999800 ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( 24.25410196865987100, -26.69471735327500600, 39.56051128339901600 ) ) ; +#1433 = CYLINDRICAL_SURFACE ( 'NONE', #461, 4.952999999999999400 ) ; +#1434 = ORIENTED_EDGE ( 'NONE', *, *, #2701, .T. ) ; +#1435 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999962700, -40.00000000000000000, 3.000000000000000000 ) ) ; +#1437 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( -23.86097832480865900, -13.92394475211450500, 37.17038346254926800 ) ) ; +#1439 = PLANE ( 'NONE', #2804 ) ; +#1440 = CARTESIAN_POINT ( 'NONE', ( 34.79019945774901100, -17.49999999999963800, 40.00000000000000000 ) ) ; +#1441 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #801, #2091, #596, #2348, #1010, #2612, #1210, #2859, #1413, #187 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001488298111837649700, 0.002976596223675299400, 0.004464894335512949500, 0.005953192447350598800 ), + .UNSPECIFIED. ) ; +#1442 = EDGE_CURVE ( 'NONE', #1508, #1353, #688, .T. ) ; +#1443 = ORIENTED_EDGE ( 'NONE', *, *, #23, .F. ) ; +#1444 = CARTESIAN_POINT ( 'NONE', ( 4.634236214957817300, -40.83985567029483100, 40.30887212019752800 ) ) ; +#1445 = ORIENTED_EDGE ( 'NONE', *, *, #327, .F. ) ; +#1446 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999997200, -17.49999999999968700, 3.000000000000000000 ) ) ; +#1447 = ORIENTED_EDGE ( 'NONE', *, *, #12, .F. ) ; +#1448 = CARTESIAN_POINT ( 'NONE', ( 27.93199999999999900, -19.99999999999979400, 39.56051128339900900 ) ) ; +#1449 = EDGE_CURVE ( 'NONE', #1781, #669, #2881, .T. ) ; +#1450 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1451 = ORIENTED_EDGE ( 'NONE', *, *, #2285, .F. ) ; +#1452 = CARTESIAN_POINT ( 'NONE', ( 4.694629771049370100, 0.3505159970044620100, 40.22578517840983600 ) ) ; +#1453 = ORIENTED_EDGE ( 'NONE', *, *, #989, .T. ) ; +#1454 = CARTESIAN_POINT ( 'NONE', ( 4.694566432472562700, -40.35150738200147900, 40.22595147222783400 ) ) ; +#1455 = CYLINDRICAL_SURFACE ( 'NONE', #609, 15.00000000000000400 ) ; +#1456 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1457 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .T. ) ; +#1458 = LINE ( 'NONE', #154, #1365 ) ; +#1459 = CYLINDRICAL_SURFACE ( 'NONE', #728, 4.952999999999999400 ) ; +#1460 = ORIENTED_EDGE ( 'NONE', *, *, #1746, .T. ) ; +#1461 = LINE ( 'NONE', #382, #1507 ) ; +#1462 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1463 = ADVANCED_FACE ( 'NONE', ( #2853 ), #2877, .T. ) ; +#1464 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005300, -24.79899999999979300, 17.37200000000000000 ) ) ; +#1465 = CARTESIAN_POINT ( 'NONE', ( 6.694717353275202700, 4.254101968659886000, 39.56051128339901600 ) ) ; +#1466 = DIRECTION ( 'NONE', ( -0.5363214786510125400, -0.8440137863433225800, 0.0000000000000000000 ) ) ; +#1467 = EDGE_CURVE ( 'NONE', #38, #954, #2846, .T. ) ; +#1468 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1469 = ADVANCED_FACE ( 'NONE', ( #2872 ), #2838, .T. ) ; +#1470 = CARTESIAN_POINT ( 'NONE', ( -12.66020679514980800, -48.04482217976524100, 40.00000000000000000 ) ) ; +#1471 = ORIENTED_EDGE ( 'NONE', *, *, #12, .T. ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995600, -54.79019945774904700, 3.000000000000018200 ) ) ; +#1473 = CARTESIAN_POINT ( 'NONE', ( -7.405616128424053800, -42.57359056984045500, 39.65590563316190800 ) ) ; +#1474 = ORIENTED_EDGE ( 'NONE', *, *, #193, .F. ) ; +#1475 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1476 = ORIENTED_EDGE ( 'NONE', *, *, #2427, .F. ) ; +#1477 = ORIENTED_EDGE ( 'NONE', *, *, #708, .T. ) ; +#1478 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 9.999999999999998200, 3.000000000000000000 ) ) ; +#1479 = DIRECTION ( 'NONE', ( -0.9807964509863738000, -0.1950341552973065300, 0.0000000000000000000 ) ) ; +#1480 = EDGE_CURVE ( 'NONE', #2114, #2609, #659, .T. ) ; +#1481 = VERTEX_POINT ( 'NONE', #915 ) ; +#1482 = CARTESIAN_POINT ( 'NONE', ( 21.15740456690458200, -15.43599545661968800, 37.28082034425731500 ) ) ; +#1483 = VECTOR ( 'NONE', #1003, 1000.000000000000000 ) ; +#1484 = FACE_OUTER_BOUND ( 'NONE', #2507, .T. ) ; +#1485 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1661, #7, #1052, #840, #2405, #638, #428, #1913 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0009204074736004646600, 0.002248350615710611500, 0.002912322186765684700, 0.003576293757820759200 ), + .UNSPECIFIED. ) ; +#1486 = CARTESIAN_POINT ( 'NONE', ( 4.603734325481228900, 0.9928855715134633500, 40.33561236390519900 ) ) ; +#1487 = FACE_OUTER_BOUND ( 'NONE', #1048, .T. ) ; +#1488 = ORIENTED_EDGE ( 'NONE', *, *, #1580, .T. ) ; +#1489 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1490 = CARTESIAN_POINT ( 'NONE', ( -7.535718860888819000, 1.221551156971713900, 39.81142960067295200 ) ) ; +#1491 = CARTESIAN_POINT ( 'NONE', ( 22.52017462818110300, -16.03397921797251500, 40.55200177161795900 ) ) ; +#1492 = CARTESIAN_POINT ( 'NONE', ( 4.127800899195784200, 2.265579847472522600, 37.17038346256048700 ) ) ; +#1493 = AXIS2_PLACEMENT_3D ( 'NONE', #1676, #1650, #1639 ) ; +#1494 = CARTESIAN_POINT ( 'NONE', ( -7.242913404670511900, -39.11946895514846300, 40.00000000000000000 ) ) ; +#1495 = CARTESIAN_POINT ( 'NONE', ( -7.508238211316331100, -41.96386351287863200, 39.72549349159630300 ) ) ; +#1496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1497 = VERTEX_POINT ( 'NONE', #1733 ) ; +#1498 = ORIENTED_EDGE ( 'NONE', *, *, #956, .F. ) ; +#1499 = ORIENTED_EDGE ( 'NONE', *, *, #2107, .F. ) ; +#1500 = CARTESIAN_POINT ( 'NONE', ( -29.99999999999999300, -22.50000000000010300, 3.000000000000000000 ) ) ; +#1501 = CARTESIAN_POINT ( 'NONE', ( 22.43508501108103900, -12.56265385275700900, 39.66997855777503900 ) ) ; +#1502 = ORIENTED_EDGE ( 'NONE', *, *, #1761, .F. ) ; +#1503 = ORIENTED_EDGE ( 'NONE', *, *, #1975, .F. ) ; +#1504 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1505 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1506 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231598400, 34.86089611231578500, 40.00000000000000000 ) ) ; +#1507 = VECTOR ( 'NONE', #225, 1000.000000000000000 ) ; +#1508 = VERTEX_POINT ( 'NONE', #296 ) ; +#1509 = VECTOR ( 'NONE', #1088, 1000.000000000000000 ) ; +#1510 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#1511 = CIRCLE ( 'NONE', #2199, 15.00000000000000000 ) ; +#1512 = ORIENTED_EDGE ( 'NONE', *, *, #1005, .T. ) ; +#1513 = CYLINDRICAL_SURFACE ( 'NONE', #1852, 15.00000000000000000 ) ; +#1514 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000002800, -22.49999999999968700, 0.0000000000000000000 ) ) ; +#1515 = EDGE_CURVE ( 'NONE', #239, #783, #2806, .T. ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( -20.49259776320147700, -12.49219836926819700, 39.89453105888362900 ) ) ; +#1517 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1518 = EDGE_CURVE ( 'NONE', #2078, #2227, #2803, .T. ) ; +#1519 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.27199999999999800 ) ) ; +#1520 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231568600, 34.86089611231624700, 0.0000000000000000000 ) ) ; +#1521 = CARTESIAN_POINT ( 'NONE', ( 7.346597300402526900, -39.53333314085827500, 39.97468994010726800 ) ) ; +#1522 = CARTESIAN_POINT ( 'NONE', ( -21.14243978350077700, -12.46485929492782000, 39.82078459404212400 ) ) ; +#1523 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.00000000000000000, 0.0000000000000000000 ) ) ; +#1524 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #19, #2891, #242 ), + ( #1907, #1042, #2329 ), + ( #1877, #654, #863 ), + ( #852, #1454, #1279 ), + ( #1065, #1076, #2698 ), + ( #234, #1444, #2412 ), + ( #2649, #1656, #2692 ), + ( #2420, #1069, #2443 ), + ( #2187, #2151, #2591 ), + ( #2683, #2668, #2661 ), + ( #1636, #1254, #1062 ), + ( #1396, #1272, #1262 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03683585975729859700, 0.03820604089774280700, 0.03889113146796491200, 0.03957622203818701700, 0.04094640317863122700, 0.04231658431907543000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865486800, 1.000000000000000000), + ( 1.000000000000000000, 0.6962713838318397300, 1.000000000000000000), + ( 1.000000000000000000, 0.6838436495740097800, 1.000000000000000000), + ( 1.000000000000000000, 0.6647867734088230800, 1.000000000000000000), + ( 1.000000000000000000, 0.6583654817850453900, 1.000000000000000000), + ( 1.000000000000000000, 0.6457501437482585600, 1.000000000000000000), + ( 1.000000000000000000, 0.6395364128715953500, 1.000000000000000000), + ( 1.000000000000000000, 0.6221906439532064500, 1.000000000000000000), + ( 1.000000000000000000, 0.6122532625757586300, 1.000000000000000000), + ( 1.000000000000000000, 0.5983464453984208600, 1.000000000000000000), + ( 1.000000000000000000, 0.5944040879547778400, 1.000000000000000000), + ( 1.000000000000000000, 0.5944745579080733500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1525 = EDGE_CURVE ( 'NONE', #2609, #1497, #2830, .T. ) ; +#1526 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1527 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 30.00000000000000000 ) ) ; +#1528 = ADVANCED_FACE ( 'NONE', ( #2792 ), #2765, .T. ) ; +#1529 = ORIENTED_EDGE ( 'NONE', *, *, #1653, .F. ) ; +#1530 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1531 = CARTESIAN_POINT ( 'NONE', ( -22.13137933377892000, -15.80240601307001400, 40.53086125769101500 ) ) ; +#1532 = ORIENTED_EDGE ( 'NONE', *, *, #1392, .F. ) ; +#1533 = ORIENTED_EDGE ( 'NONE', *, *, #2634, .T. ) ; +#1534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1535 = ORIENTED_EDGE ( 'NONE', *, *, #392, .F. ) ; +#1536 = DIRECTION ( 'NONE', ( 0.9807964509863754700, -0.1950341552972983400, -1.767124896318475200E-015 ) ) ; +#1537 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#1538 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999962700, -50.00000000000000000, 3.000000000000000000 ) ) ; +#1539 = VERTEX_POINT ( 'NONE', #2261 ) ; +#1540 = LINE ( 'NONE', #1072, #1483 ) ; +#1541 = ORIENTED_EDGE ( 'NONE', *, *, #2588, .F. ) ; +#1542 = FACE_OUTER_BOUND ( 'NONE', #2432, .T. ) ; +#1543 = DIRECTION ( 'NONE', ( -3.469446951953614200E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1544 = ADVANCED_FACE ( 'NONE', ( #2789 ), #2762, .F. ) ; +#1545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1546 = CYLINDRICAL_SURFACE ( 'NONE', #2886, 4.952999999999999400 ) ; +#1547 = ORIENTED_EDGE ( 'NONE', *, *, #2456, .F. ) ; +#1548 = EDGE_CURVE ( 'NONE', #2746, #1182, #2763, .T. ) ; +#1549 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231611900, -74.86089611231555800, 0.0000000000000000000 ) ) ; +#1550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1551 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 30.00000000000000000 ) ) ; +#1552 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1555 = DIRECTION ( 'NONE', ( 0.5363214786510123200, 0.8440137863433225800, 0.0000000000000000000 ) ) ; +#1556 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.27199999999999800 ) ) ; +#1557 = CARTESIAN_POINT ( 'NONE', ( 20.44003142538453200, -15.30099999999787400, 37.38882461611529400 ) ) ; +#1558 = DIRECTION ( 'NONE', ( 0.9807964509863763600, -0.1950341552972932900, 0.0000000000000000000 ) ) ; +#1559 = ORIENTED_EDGE ( 'NONE', *, *, #392, .T. ) ; +#1560 = DIRECTION ( 'NONE', ( -1.050710766793947400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1561 = CARTESIAN_POINT ( 'NONE', ( 35.07059174458552800, -19.15882313949013100, 2.004706116305717600 ) ) ; +#1562 = ORIENTED_EDGE ( 'NONE', *, *, #1569, .F. ) ; +#1563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1564 = CARTESIAN_POINT ( 'NONE', ( -12.80100000000000000, -20.00000000000007100, 37.50000000000000000 ) ) ; +#1565 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 37.17038346254926800 ) ) ; +#1566 = VERTEX_POINT ( 'NONE', #2010 ) ; +#1567 = DESIGN_CONTEXT ( 'detailed design', #2001, 'design' ) ; +#1568 = ORIENTED_EDGE ( 'NONE', *, *, #1411, .F. ) ; +#1569 = EDGE_CURVE ( 'NONE', #1353, #33, #2797, .T. ) ; +#1570 = CARTESIAN_POINT ( 'NONE', ( -19.99999999997951500, -24.69900000000007300, 37.43962887310161100 ) ) ; +#1571 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ; +#1572 = CARTESIAN_POINT ( 'NONE', ( 20.88450869726812100, -24.63590663805554500, 37.31637200410992200 ) ) ; +#1573 = FACE_BOUND ( 'NONE', #2749, .T. ) ; +#1574 = VERTEX_POINT ( 'NONE', #734 ) ; +#1575 = FACE_OUTER_BOUND ( 'NONE', #686, .T. ) ; +#1576 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 37.50000000000000000 ) ) ; +#1577 = TOROIDAL_SURFACE ( 'NONE', #2015, 60.00000000000000700, 10.00000000000000000 ) ; +#1578 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -50.00000000000000000, 3.000000000000000000 ) ) ; +#1579 = TOROIDAL_SURFACE ( 'NONE', #829, 7.199000000000000700, 2.500000000000000000 ) ; +#1580 = EDGE_CURVE ( 'NONE', #1743, #2513, #2753, .T. ) ; +#1581 = AXIS2_PLACEMENT_3D ( 'NONE', #747, #2294, #966 ) ; +#1582 = CARTESIAN_POINT ( 'NONE', ( 19.99999999997950100, -15.30099999999979200, 37.43962887310161100 ) ) ; +#1583 = CARTESIAN_POINT ( 'NONE', ( -19.37975755574572600, -15.33233268309525600, 37.49999999444552400 ) ) ; +#1584 = CARTESIAN_POINT ( 'NONE', ( -20.39475029890775900, -27.48605114968501100, 39.90112219381976600 ) ) ; +#1585 = DIRECTION ( 'NONE', ( 1.000000000000000000, -6.245004513516505500E-015, 0.0000000000000000000 ) ) ; +#1586 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999998900, -22.50000000000003600, 3.000000000000000000 ) ) ; +#1587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1588 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1589 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1590 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1591 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 37.17038346254926800 ) ) ; +#1592 = CARTESIAN_POINT ( 'NONE', ( -21.44255112164516000, -24.48201198715948100, 37.24168871790749300 ) ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, -39.99999999997954300, 37.43962887310160400 ) ) ; +#1594 = DIRECTION ( 'NONE', ( 1.796352328989214800E-015, -0.5144957554275280100, -0.8574929257125434300 ) ) ; +#1595 = EDGE_CURVE ( 'NONE', #38, #1143, #2755, .T. ) ; +#1596 = DIRECTION ( 'NONE', ( 1.000000000000000000, 9.638691351447739000E-016, 0.0000000000000000000 ) ) ; +#1597 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1598 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 39.56051128339900900 ) ) ; +#1599 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -50.00000000000000000, 0.0000000000000000000 ) ) ; +#1600 = ORIENTED_EDGE ( 'NONE', *, *, #2494, .F. ) ; +#1601 = ADVANCED_FACE ( 'NONE', ( #2759 ), #2850, .T. ) ; +#1602 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1603 = EDGE_CURVE ( 'NONE', #2455, #2078, #2726, .T. ) ; +#1604 = ORIENTED_EDGE ( 'NONE', *, *, #287, .T. ) ; +#1605 = VERTEX_POINT ( 'NONE', #2800 ) ; +#1606 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1607 = CARTESIAN_POINT ( 'NONE', ( 20.39327955109972000, -27.48587127364045200, 39.90126456779103100 ) ) ; +#1608 = ORIENTED_EDGE ( 'NONE', *, *, #576, .F. ) ; +#1609 = CARTESIAN_POINT ( 'NONE', ( 19.38000455234717400, -15.33228356712042700, 37.49999999444089100 ) ) ; +#1610 = APPROVAL_DATE_TIME ( #1615, #1797 ) ; +#1611 = CIRCLE ( 'NONE', #2707, 4.698999999999999800 ) ; +#1612 = CARTESIAN_POINT ( 'NONE', ( 18.59594911601466200, -12.93924634934883000, 40.00000000000000000 ) ) ; +#1613 = VERTEX_POINT ( 'NONE', #345 ) ; +#1614 = VECTOR ( 'NONE', #1553, 1000.000000000000000 ) ; +#1615 = DATE_AND_TIME ( #1619, #1621 ) ; +#1616 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.27199999999999800 ) ) ; +#1617 = LINE ( 'NONE', #1470, #1614 ) ; +#1618 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ; +#1619 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1620 = AXIS2_PLACEMENT_3D ( 'NONE', #410, #1850, #2182 ) ; +#1621 = LOCAL_TIME ( 15, 10, 1.000000000000000000, #1624 ) ; +#1622 = CARTESIAN_POINT ( 'NONE', ( 21.43127044451329200, -24.49464009563120500, 40.41363463513589200 ) ) ; +#1623 = CARTESIAN_POINT ( 'NONE', ( 20.83985567029244700, -15.36576378504177900, 40.30887212019753500 ) ) ; +#1624 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1625 = APPROVAL_PERSON_ORGANIZATION ( #1628, #1797, #737 ) ; +#1626 = PLANE ( 'NONE', #2501 ) ; +#1627 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999997200, -17.49999999999982900, 3.000000000000000000 ) ) ; +#1628 = PERSON_AND_ORGANIZATION ( #1110, #1772 ) ; +#1629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1630 = ORIENTED_EDGE ( 'NONE', *, *, #1838, .T. ) ; +#1631 = AXIS2_PLACEMENT_3D ( 'NONE', #2811, #1768, #1762 ) ; +#1632 = DIRECTION ( 'NONE', ( 0.5363214786510153200, -0.8440137863433205800, 0.0000000000000000000 ) ) ; +#1633 = DIRECTION ( 'NONE', ( -5.389056986967644500E-015, 0.5144957554275280100, -0.8574929257125434300 ) ) ; +#1634 = ORIENTED_EDGE ( 'NONE', *, *, #956, .T. ) ; +#1635 = CARTESIAN_POINT ( 'NONE', ( 7.060753650650909200, -1.404050883985257200, 40.00000000000000000 ) ) ; +#1636 = CARTESIAN_POINT ( 'NONE', ( 4.125765669950726400, -42.26878270547760500, 37.17038346231969800 ) ) ; +#1637 = ORIENTED_EDGE ( 'NONE', *, *, #1774, .F. ) ; +#1638 = PLANE ( 'NONE', #2178 ) ; +#1639 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1640 = CIRCLE ( 'NONE', #123, 4.698999999999998100 ) ; +#1641 = ORIENTED_EDGE ( 'NONE', *, *, #465, .F. ) ; +#1642 = VECTOR ( 'NONE', #1747, 1000.000000000000000 ) ; +#1643 = DATE_AND_TIME ( #1648, #1649 ) ; +#1644 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231611900, -74.86089611231555800, 30.00000000000000000 ) ) ; +#1645 = LINE ( 'NONE', #1081, #1509 ) ; +#1646 = PLANE ( 'NONE', #2655 ) ; +#1647 = LINE ( 'NONE', #1478, #1642 ) ; +#1648 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1649 = LOCAL_TIME ( 15, 10, 1.000000000000000000, #1652 ) ; +#1650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1651 = CARTESIAN_POINT ( 'NONE', ( -29.99999999999999300, -22.50000000000010300, 3.000000000000000000 ) ) ; +#1652 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1653 = EDGE_CURVE ( 'NONE', #2058, #105, #2729, .T. ) ; +#1654 = CARTESIAN_POINT ( 'NONE', ( 7.511159754144205000, 0.6443287884891153400, 39.87542036636915600 ) ) ; +#1655 = PERSON_AND_ORGANIZATION ( #1110, #1772 ) ; +#1656 = CARTESIAN_POINT ( 'NONE', ( 4.603439341132521200, -40.99427497393570300, 40.33585679829767700 ) ) ; +#1657 = PERSON_AND_ORGANIZATION ( #1110, #1772 ) ; +#1658 = EDGE_CURVE ( 'NONE', #2022, #500, #603, .T. ) ; +#1659 = PERSON_AND_ORGANIZATION ( #1110, #1772 ) ; +#1660 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001800, -15.04700000000007000, 17.27199999999999800 ) ) ; +#1661 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001400, -15.30100000000006900, 37.43962887309924500 ) ) ; +#1662 = ORIENTED_EDGE ( 'NONE', *, *, #2440, .F. ) ; +#1663 = ORIENTED_EDGE ( 'NONE', *, *, #943, .F. ) ; +#1664 = CARTESIAN_POINT ( 'NONE', ( 7.508238211316321300, 1.963863512878677200, 39.72549349159630300 ) ) ; +#1665 = EDGE_CURVE ( 'NONE', #2346, #2105, #2717, .T. ) ; +#1666 = EDGE_CURVE ( 'NONE', #1353, #2078, #2728, .T. ) ; +#1667 = ORIENTED_EDGE ( 'NONE', *, *, #2046, .T. ) ; +#1668 = ADVANCED_FACE ( 'NONE', ( #2720 ), #2689, .F. ) ; +#1669 = ORIENTED_EDGE ( 'NONE', *, *, #197, .F. ) ; +#1670 = FACE_OUTER_BOUND ( 'NONE', #1313, .T. ) ; +#1671 = ORIENTED_EDGE ( 'NONE', *, *, #2050, .T. ) ; +#1672 = APPROVAL_DATE_TIME ( #1678, #1840 ) ; +#1673 = FACE_OUTER_BOUND ( 'NONE', #249, .T. ) ; +#1674 = ORIENTED_EDGE ( 'NONE', *, *, #2050, .F. ) ; +#1675 = CIRCLE ( 'NONE', #1366, 7.931999999999999500 ) ; +#1676 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231582800, -74.86089611231602700, 30.00000000000000000 ) ) ; +#1677 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.27199999999999800 ) ) ; +#1678 = DATE_AND_TIME ( #1681, #1682 ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( -4.482601985295072900, -41.44066269637620800, 37.24192922384393300 ) ) ; +#1680 = CIRCLE ( 'NONE', #369, 7.932000000000001300 ) ; +#1681 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1682 = LOCAL_TIME ( 15, 10, 1.000000000000000000, #1683 ) ; +#1683 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1684 = DIRECTION ( 'NONE', ( 3.540974639675049600E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1685 = CARTESIAN_POINT ( 'NONE', ( -7.222969496246930600, -0.9378490442045722700, 40.00000000000000700 ) ) ; +#1686 = APPROVAL_PERSON_ORGANIZATION ( #1689, #1840, #1342 ) ; +#1687 = EDGE_CURVE ( 'NONE', #1098, #941, #2693, .T. ) ; +#1688 = CARTESIAN_POINT ( 'NONE', ( 22.11668551954115000, -12.51167119196409100, 39.70776045654687900 ) ) ; +#1689 = PERSON_AND_ORGANIZATION ( #1110, #1772 ) ; +#1690 = CARTESIAN_POINT ( 'NONE', ( 7.488683313945042400, 2.113946241257068900, 39.70807550649122000 ) ) ; +#1691 = CARTESIAN_POINT ( 'NONE', ( -3.966020782027261500, -42.52017462818112400, 37.17038346254926800 ) ) ; +#1692 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -50.00000000000000000, 0.0000000000000000000 ) ) ; +#1693 = VERTEX_POINT ( 'NONE', #1238 ) ; +#1694 = CARTESIAN_POINT ( 'NONE', ( -7.437346147242783100, 2.435085011081045800, 39.66997855777502500 ) ) ; +#1695 = ADVANCED_FACE ( 'NONE', ( #2687 ), #1626, .T. ) ; +#1696 = ORIENTED_EDGE ( 'NONE', *, *, #1889, .T. ) ; +#1697 = ORIENTED_EDGE ( 'NONE', *, *, #1603, .F. ) ; +#1698 = CARTESIAN_POINT ( 'NONE', ( 3.966020782027253500, 2.520174628181138600, 40.55200177161796700 ) ) ; +#1699 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1700 = ORIENTED_EDGE ( 'NONE', *, *, #2861, .F. ) ; +#1701 = CARTESIAN_POINT ( 'NONE', ( -4.667667316904696100, -39.37975755574513700, 37.49999999444552400 ) ) ; +#1702 = CARTESIAN_POINT ( 'NONE', ( -7.507801630731869100, -40.49259776320146600, 39.89453105888362900 ) ) ; +#1703 = ORIENTED_EDGE ( 'NONE', *, *, #1225, .F. ) ; +#1704 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 0.0000000000000000000 ) ) ; +#1705 = VERTEX_POINT ( 'NONE', #1045 ) ; +#1706 = ORIENTED_EDGE ( 'NONE', *, *, #1595, .T. ) ; +#1707 = EDGE_CURVE ( 'NONE', #988, #232, #2691, .T. ) ; +#1708 = CIRCLE ( 'NONE', #1631, 4.952999999999999400 ) ; +#1709 = DATE_AND_TIME ( #1714, #1716 ) ; +#1710 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.37200000000000000 ) ) ; +#1711 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ; +#1712 = ORIENTED_EDGE ( 'NONE', *, *, #2236, .F. ) ; +#1713 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, -0.3049891216841707500, 37.47484168932486200 ) ) ; +#1714 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1715 = EDGE_CURVE ( 'NONE', #2474, #2455, #2695, .T. ) ; +#1716 = LOCAL_TIME ( 15, 10, 1.000000000000000000, #1719 ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( 4.452445505885888700, 1.518116024944949000, 37.23454346965972700 ) ) ; +#1718 = CARTESIAN_POINT ( 'NONE', ( 23.83583913405929900, -13.03950103800274200, 39.56051128339901600 ) ) ; +#1719 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1720 = PERSON_AND_ORGANIZATION ( #1110, #1772 ) ; +#1721 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1722 = EDGE_CURVE ( 'NONE', #944, #1057, #2685, .T. ) ; +#1723 = APPROVAL_DATE_TIME ( #1725, #1870 ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 14.79019945774904000, 0.0000000000000000000 ) ) ; +#1725 = DATE_AND_TIME ( #1745, #1752 ) ; +#1726 = ADVANCED_FACE ( 'NONE', ( #2712 ), #2660, .T. ) ; +#1727 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999995000, -15.20099999999979100, 17.27199999999999800 ) ) ; +#1728 = CARTESIAN_POINT ( 'NONE', ( -19.06305637139100600, -12.77671546261883900, 40.00000000000000700 ) ) ; +#1729 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1730 = ORIENTED_EDGE ( 'NONE', *, *, #162, .T. ) ; +#1731 = ORIENTED_EDGE ( 'NONE', *, *, #622, .F. ) ; +#1732 = DIRECTION ( 'NONE', ( -1.012132888671610400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1733 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 14.79019945774904000, 0.0000000000000000000 ) ) ; +#1734 = EDGE_CURVE ( 'NONE', #1497, #487, #2678, .T. ) ; +#1735 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231582800, -74.86089611231602700, 40.00000000000000000 ) ) ; +#1736 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( 7.496455149508765500, -40.49051925126208600, 39.89124554043246500 ) ) ; +#1738 = ORIENTED_EDGE ( 'NONE', *, *, #795, .F. ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( -20.56654954608639200, -15.33289383811188100, 37.36558844647157000 ) ) ; +#1740 = VERTEX_POINT ( 'NONE', #472 ) ; +#1741 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1742 = ADVANCED_FACE ( 'NONE', ( #2657 ), #2651, .T. ) ; +#1743 = VERTEX_POINT ( 'NONE', #878 ) ; +#1744 = ORIENTED_EDGE ( 'NONE', *, *, #2397, .T. ) ; +#1745 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1746 = EDGE_CURVE ( 'NONE', #2835, #665, #2645, .T. ) ; +#1747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1748 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.469446951953613400E-015, 0.0000000000000000000 ) ) ; +#1749 = ORIENTED_EDGE ( 'NONE', *, *, #2795, .F. ) ; +#1750 = ORIENTED_EDGE ( 'NONE', *, *, #576, .T. ) ; +#1751 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, -39.99999999999999300, 37.43962887309924500 ) ) ; +#1752 = LOCAL_TIME ( 15, 10, 1.000000000000000000, #1756 ) ; +#1753 = MECHANICAL_CONTEXT ( 'NONE', #1530, 'mechanical' ) ; +#1754 = ORIENTED_EDGE ( 'NONE', *, *, #924, .F. ) ; +#1755 = ORIENTED_EDGE ( 'NONE', *, *, #1356, .F. ) ; +#1756 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1757 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1758 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.00000000000000000, 40.00000000000000000 ) ) ; +#1759 = APPROVAL_PERSON_ORGANIZATION ( #1764, #1870, #938 ) ; +#1760 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, -2.045723378207577100E-011, 37.43962887310160400 ) ) ; +#1761 = EDGE_CURVE ( 'NONE', #105, #975, #2653, .T. ) ; +#1762 = DIRECTION ( 'NONE', ( 3.502369222646491800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1763 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 17.37200000000000000 ) ) ; +#1764 = PERSON_AND_ORGANIZATION ( #1110, #1772 ) ; +#1765 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #356, #2373, #396, #346, #344, #331, #328, #318, #307, #258, #246, #231 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001458216824229725900, 0.002187325236344588800, 0.002916433648459451900, 0.004374650472689177600, 0.005832867296918903800 ), + .UNSPECIFIED. ) ; +#1766 = ADVANCED_FACE ( 'NONE', ( #2614 ), #584, .T. ) ; +#1767 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#1768 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1769 = DIRECTION ( 'NONE', ( -1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1770 = PERSON_AND_ORGANIZATION ( #1110, #1772 ) ; +#1771 = CARTESIAN_POINT ( 'NONE', ( -24.25410196865983900, -26.69471735327530500, 39.56051128339901600 ) ) ; +#1772 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#1773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1774 = EDGE_CURVE ( 'NONE', #487, #1900, #2610, .T. ) ; +#1775 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #2377 ) ) ; +#1776 = EDGE_CURVE ( 'NONE', #941, #665, #547, .T. ) ; +#1777 = VERTEX_POINT ( 'NONE', #1096 ) ; +#1778 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, 6.065675596176840400E-016, 0.0000000000000000000 ) ) ; +#1779 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1780 = CC_DESIGN_SECURITY_CLASSIFICATION ( #1812, ( #1843 ) ) ; +#1781 = VERTEX_POINT ( 'NONE', #891 ) ; +#1782 = DIRECTION ( 'NONE', ( -1.062292391902515000E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1783 = CARTESIAN_POINT ( 'NONE', ( 12.66020679514977200, 8.044822179765287000, 0.0000000000000000000 ) ) ; +#1784 = ORIENTED_EDGE ( 'NONE', *, *, #119, .F. ) ; +#1785 = CARTESIAN_POINT ( 'NONE', ( -34.79019945774903300, -22.50000000000012100, 0.0000000000000000000 ) ) ; +#1786 = ORIENTED_EDGE ( 'NONE', *, *, #2696, .T. ) ; +#1787 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1788 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ; +#1789 = CC_DESIGN_APPROVAL ( #1797, ( #1812 ) ) ; +#1790 = EDGE_CURVE ( 'NONE', #820, #1015, #524, .T. ) ; +#1791 = ORIENTED_EDGE ( 'NONE', *, *, #2570, .T. ) ; +#1792 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1793 = ORIENTED_EDGE ( 'NONE', *, *, #2222, .F. ) ; +#1794 = ORIENTED_EDGE ( 'NONE', *, *, #2456, .T. ) ; +#1795 = PLANE ( 'NONE', #2416 ) ; +#1796 = SHAPE_DEFINITION_REPRESENTATION ( #430, #40 ) ; +#1797 = APPROVAL ( #2012, 'UNSPECIFIED' ) ; +#1798 = CARTESIAN_POINT ( 'NONE', ( -22.52017462818111000, -23.96602078202733900, 37.17038346254926800 ) ) ; +#1799 = ORIENTED_EDGE ( 'NONE', *, *, #1820, .F. ) ; +#1800 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, -40.00000000000000000, 17.27199999999999800 ) ) ; +#1801 = ADVANCED_FACE ( 'NONE', ( #2613 ), #2725, .F. ) ; +#1802 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1643, #536, ( #1812 ) ) ; +#1803 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1804 = CARTESIAN_POINT ( 'NONE', ( -23.86901030922099000, -13.06057938298496300, 39.56051128341335500 ) ) ; +#1805 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1807 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1808 = CARTESIAN_POINT ( 'NONE', ( 21.72519634693438200, -24.37651687320098400, 37.21134763931901500 ) ) ; +#1809 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1655, #1767, ( #1812 ) ) ; +#1810 = CARTESIAN_POINT ( 'NONE', ( 7.060753650650952700, -38.59594911601463700, 40.00000000000000000 ) ) ; +#1811 = CARTESIAN_POINT ( 'NONE', ( 19.38996809161674100, -15.33030228908536000, 37.50000000000000000 ) ) ; +#1812 = SECURITY_CLASSIFICATION ( '', '', #321 ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( -19.83778086938000800, -15.28924095609728300, 40.13945356267688400 ) ) ; +#1814 = CARTESIAN_POINT ( 'NONE', ( -20.51850427845566900, -24.67957510149202300, 40.25394205036033000 ) ) ; +#1815 = EDGE_CURVE ( 'NONE', #1128, #2150, #517, .T. ) ; +#1816 = CARTESIAN_POINT ( 'NONE', ( -4.698999999999999800, -39.99999999999999300, 37.43962887309924500 ) ) ; +#1817 = ORIENTED_EDGE ( 'NONE', *, *, #474, .F. ) ; +#1818 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1657, #1537, ( #1843 ) ) ; +#1819 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 30.00000000000000000 ) ) ; +#1820 = EDGE_CURVE ( 'NONE', #799, #2716, #2576, .T. ) ; +#1821 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 30.00000000000000000 ) ) ; +#1822 = ORIENTED_EDGE ( 'NONE', *, *, #732, .F. ) ; +#1823 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1824 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1659, #116, ( #1843 ) ) ; +#1825 = ORIENTED_EDGE ( 'NONE', *, *, #317, .T. ) ; +#1826 = CARTESIAN_POINT ( 'NONE', ( -22.57662236135824700, -27.40497415417128800, 39.65558495857857900 ) ) ; +#1827 = EDGE_CURVE ( 'NONE', #500, #1173, #2606, .T. ) ; +#1828 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1829 = ORIENTED_EDGE ( 'NONE', *, *, #339, .T. ) ; +#1830 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999995000, -15.30099999999979200, 40.00100000000000500 ) ) ; +#1831 = FACE_OUTER_BOUND ( 'NONE', #907, .T. ) ; +#1832 = ORIENTED_EDGE ( 'NONE', *, *, #21, .T. ) ; +#1833 = CC_DESIGN_APPROVAL ( #1840, ( #1843 ) ) ; +#1834 = ORIENTED_EDGE ( 'NONE', *, *, #847, .F. ) ; +#1835 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999997200, -17.49999999999968700, 3.000000000000000000 ) ) ; +#1836 = ORIENTED_EDGE ( 'NONE', *, *, #1837, .T. ) ; +#1837 = EDGE_CURVE ( 'NONE', #1128, #2751, #2574, .T. ) ; +#1838 = EDGE_CURVE ( 'NONE', #2267, #669, #2602, .T. ) ; +#1839 = ORIENTED_EDGE ( 'NONE', *, *, #1548, .F. ) ; +#1840 = APPROVAL ( #2777, 'UNSPECIFIED' ) ; +#1841 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001800, -15.04700000000007000, 0.0000000000000000000 ) ) ; +#1842 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #553, #550, #545, #544, #529, #519, #479, #471 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0006738747560560091200, 0.001347749512112018200, 0.002695499024224039900 ), + .UNSPECIFIED. ) ; +#1843 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #2377, .NOT_KNOWN. ) ; +#1844 = VECTOR ( 'NONE', #920, 1000.000000000000000 ) ; +#1845 = CARTESIAN_POINT ( 'NONE', ( -7.060753650650959800, -38.59594911601470100, 40.00000000000000000 ) ) ; +#1846 = CARTESIAN_POINT ( 'NONE', ( 20.12092792643495900, -24.69978470060224000, 37.42594842690225200 ) ) ; +#1847 = CARTESIAN_POINT ( 'NONE', ( 19.11990535527460000, -12.75693474904857200, 40.00000000000000000 ) ) ; +#1848 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1849 = CIRCLE ( 'NONE', #1946, 50.00000000000000700 ) ; +#1850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1851 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1709, #1146, ( #1875 ) ) ; +#1852 = AXIS2_PLACEMENT_3D ( 'NONE', #1380, #1185, #1153 ) ; +#1853 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 40.00000000000000000 ) ) ; +#1854 = ORIENTED_EDGE ( 'NONE', *, *, #1917, .F. ) ; +#1855 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1720, #2528, ( #1875 ) ) ; +#1856 = CARTESIAN_POINT ( 'NONE', ( 22.57359056983938900, -27.40561612842521600, 39.65590563316175100 ) ) ; +#1857 = EDGE_CURVE ( 'NONE', #1098, #2682, #2565, .T. ) ; +#1858 = ORIENTED_EDGE ( 'NONE', *, *, #813, .F. ) ; +#1859 = CC_DESIGN_APPROVAL ( #1870, ( #1875 ) ) ; +#1860 = ORIENTED_EDGE ( 'NONE', *, *, #1827, .T. ) ; +#1861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1862 = ORIENTED_EDGE ( 'NONE', *, *, #2754, .T. ) ; +#1863 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1864 = CARTESIAN_POINT ( 'NONE', ( -19.38996809162362200, -15.33030228908427100, 37.50000000000000000 ) ) ; +#1865 = ORIENTED_EDGE ( 'NONE', *, *, #2734, .F. ) ; +#1866 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1867 = CIRCLE ( 'NONE', #548, 50.00000000000000000 ) ; +#1868 = CARTESIAN_POINT ( 'NONE', ( 4.608762523184965200, -39.08353450425793300, 37.50000000000000000 ) ) ; +#1869 = ORIENTED_EDGE ( 'NONE', *, *, #52, .F. ) ; +#1870 = APPROVAL ( #2265, 'UNSPECIFIED' ) ; +#1871 = EDGE_LOOP ( 'NONE', ( #2889, #1562, #2363, #607 ) ) ; +#1872 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1873 = ORIENTED_EDGE ( 'NONE', *, *, #1449, .F. ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005300, -24.95299999999979000, 17.27199999999999800 ) ) ; +#1875 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #1843, #1567 ) ; +#1876 = LINE ( 'NONE', #89, #1844 ) ; +#1877 = CARTESIAN_POINT ( 'NONE', ( 4.697240840517293000, -39.67646981698010900, 37.47635238510334700 ) ) ; +#1878 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1770, #520, ( #2377 ) ) ; +#1879 = FACE_OUTER_BOUND ( 'NONE', #277, .T. ) ; +#1880 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.00000000000000000, -0.001000000000001000100 ) ) ; +#1881 = EDGE_CURVE ( 'NONE', #2215, #436, #2558, .T. ) ; +#1882 = AXIS2_PLACEMENT_3D ( 'NONE', #2500, #1987, #310 ) ; +#1883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1884 = CIRCLE ( 'NONE', #1951, 4.953000000000000300 ) ; +#1885 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1886 = FACE_OUTER_BOUND ( 'NONE', #2358, .T. ) ; +#1887 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.37200000000000000 ) ) ; +#1888 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1889 = EDGE_CURVE ( 'NONE', #783, #2078, #2531, .T. ) ; +#1890 = ORIENTED_EDGE ( 'NONE', *, *, #2098, .T. ) ; +#1891 = ORIENTED_EDGE ( 'NONE', *, *, #2570, .F. ) ; +#1892 = AXIS2_PLACEMENT_3D ( 'NONE', #2011, #736, #2279 ) ; +#1893 = CARTESIAN_POINT ( 'NONE', ( -29.99999999999999300, -22.50000000000010300, 0.0000000000000000000 ) ) ; +#1894 = VERTEX_POINT ( 'NONE', #353 ) ; +#1895 = CARTESIAN_POINT ( 'NONE', ( 4.693645331681957500, 0.2693544409984340300, 37.40656527383677600 ) ) ; +#1896 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1897 = ORIENTED_EDGE ( 'NONE', *, *, #510, .F. ) ; +#1898 = ORIENTED_EDGE ( 'NONE', *, *, #2533, .F. ) ; +#1899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1900 = VERTEX_POINT ( 'NONE', #2045 ) ; +#1901 = EDGE_LOOP ( 'NONE', ( #1964, #1971, #2009, #2016, #2054, #1447 ) ) ; +#1902 = EDGE_LOOP ( 'NONE', ( #2459, #2465, #2492, #2504, #2537, #2540 ) ) ; +#1903 = CIRCLE ( 'NONE', #1969, 60.00000000000000700 ) ; +#1904 = ORIENTED_EDGE ( 'NONE', *, *, #708, .F. ) ; +#1905 = EDGE_CURVE ( 'NONE', #2013, #1693, #2561, .T. ) ; +#1906 = ORIENTED_EDGE ( 'NONE', *, *, #533, .F. ) ; +#1907 = CARTESIAN_POINT ( 'NONE', ( 4.667716432879593000, -39.38000455234831800, 37.49999999444089100 ) ) ; +#1908 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ; +#1909 = FACE_OUTER_BOUND ( 'NONE', #1162, .T. ) ; +#1910 = ORIENTED_EDGE ( 'NONE', *, *, #2451, .F. ) ; +#1911 = ADVANCED_FACE ( 'NONE', ( #2520 ), #1795, .F. ) ; +#1912 = TOROIDAL_SURFACE ( 'NONE', #1963, 4.999999999999999100, 10.00000000000000000 ) ; +#1913 = CARTESIAN_POINT ( 'NONE', ( -22.52017462818112400, -16.03397921797280600, 37.17038346254926800 ) ) ; +#1914 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1915 = CIRCLE ( 'NONE', #1956, 0.09999999999999939500 ) ; +#1916 = CARTESIAN_POINT ( 'NONE', ( -7.535140705072733700, -41.14243978350118200, 39.82078459404201700 ) ) ; +#1917 = EDGE_CURVE ( 'NONE', #917, #2051, #2515, .T. ) ; +#1918 = VECTOR ( 'NONE', #124, 1000.000000000000000 ) ; +#1919 = CARTESIAN_POINT ( 'NONE', ( 23.86097832480862400, -13.92394475211420100, 37.17038346254926800 ) ) ; +#1920 = LINE ( 'NONE', #729, #1918 ) ; +#1921 = CIRCLE ( 'NONE', #1979, 15.00000000000000000 ) ; +#1922 = DIRECTION ( 'NONE', ( 3.502369222646491800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1923 = DIRECTION ( 'NONE', ( -1.050710766793947400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1924 = CARTESIAN_POINT ( 'NONE', ( -4.197593986928410500, -42.13137933377821300, 40.53086125769103600 ) ) ; +#1925 = EDGE_CURVE ( 'NONE', #518, #1705, #2509, .T. ) ; +#1926 = ORIENTED_EDGE ( 'NONE', *, *, #2276, .T. ) ; +#1927 = VERTEX_POINT ( 'NONE', #2829 ) ; +#1928 = EDGE_CURVE ( 'NONE', #710, #1781, #494, .T. ) ; +#1929 = EDGE_CURVE ( 'NONE', #185, #669, #2527, .T. ) ; +#1930 = ORIENTED_EDGE ( 'NONE', *, *, #943, .T. ) ; +#1931 = CARTESIAN_POINT ( 'NONE', ( 21.68227820815733500, -15.59885926813656100, 40.46087376877419900 ) ) ; +#1932 = ORIENTED_EDGE ( 'NONE', *, *, #226, .T. ) ; +#1933 = CARTESIAN_POINT ( 'NONE', ( 4.564415655000952500, 1.155720756925819200, 37.28105663171557200 ) ) ; +#1934 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #100 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #929, #2516, #1133 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1935 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 30.00000000000000000 ) ) ; +#1936 = ADVANCED_FACE ( 'NONE', ( #155, #2524 ), #2087, .T. ) ; +#1937 = EDGE_LOOP ( 'NONE', ( #2791, #959, #42, #523 ) ) ; +#1938 = ORIENTED_EDGE ( 'NONE', *, *, #1722, .T. ) ; +#1939 = ORIENTED_EDGE ( 'NONE', *, *, #674, .T. ) ; +#1940 = CARTESIAN_POINT ( 'NONE', ( -7.060753650650899400, -38.59594911601470800, 40.00000000000000000 ) ) ; +#1941 = CARTESIAN_POINT ( 'NONE', ( -6.960498961997045000, 3.835839134059309400, 39.56051128339900900 ) ) ; +#1942 = EDGE_LOOP ( 'NONE', ( #2297, #2349, #2384, #323, #2421, #2426 ) ) ; +#1943 = ORIENTED_EDGE ( 'NONE', *, *, #2795, .T. ) ; +#1944 = VECTOR ( 'NONE', #2270, 1000.000000000000000 ) ; +#1945 = LINE ( 'NONE', #2256, #1944 ) ; +#1946 = AXIS2_PLACEMENT_3D ( 'NONE', #1520, #301, #1736 ) ; +#1947 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1948 = AXIS2_PLACEMENT_3D ( 'NONE', #1464, #2401, #1629 ) ; +#1949 = TOROIDAL_SURFACE ( 'NONE', #1972, 4.799000000000000400, 0.1000000000000000100 ) ; +#1950 = CARTESIAN_POINT ( 'NONE', ( -4.710759043902594800, -39.83778086938156800, 40.13945356267688400 ) ) ; +#1951 = AXIS2_PLACEMENT_3D ( 'NONE', #361, #1806, #567 ) ; +#1952 = CARTESIAN_POINT ( 'NONE', ( -7.223284537381237800, -39.06305637139099200, 40.00000000000000700 ) ) ; +#1953 = CYLINDRICAL_SURFACE ( 'NONE', #1996, 4.953000000000000300 ) ; +#1954 = DIRECTION ( 'NONE', ( 1.040834085586083900E-014, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1955 = CIRCLE ( 'NONE', #2003, 2.500000000000002200 ) ; +#1956 = AXIS2_PLACEMENT_3D ( 'NONE', #1176, #2816, #1374 ) ; +#1957 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1958 = FACE_OUTER_BOUND ( 'NONE', #201, .T. ) ; +#1959 = ORIENTED_EDGE ( 'NONE', *, *, #1734, .F. ) ; +#1960 = CARTESIAN_POINT ( 'NONE', ( 4.193730148045316900, 2.131391522519095800, 37.17917958233354600 ) ) ; +#1961 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, -40.00000000000000000, 40.00100000000000500 ) ) ; +#1962 = ORIENTED_EDGE ( 'NONE', *, *, #626, .F. ) ; +#1963 = AXIS2_PLACEMENT_3D ( 'NONE', #1551, #748, #1367 ) ; +#1964 = ORIENTED_EDGE ( 'NONE', *, *, #622, .T. ) ; +#1965 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 40.00100000000000500 ) ) ; +#1966 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.37200000000000000 ) ) ; +#1967 = ADVANCED_FACE ( 'NONE', ( #2482 ), #2486, .T. ) ; +#1968 = ORIENTED_EDGE ( 'NONE', *, *, #618, .F. ) ; +#1969 = AXIS2_PLACEMENT_3D ( 'NONE', #2043, #761, #2302 ) ; +#1970 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1971 = ORIENTED_EDGE ( 'NONE', *, *, #1790, .T. ) ; +#1972 = AXIS2_PLACEMENT_3D ( 'NONE', #540, #335, #1782 ) ; +#1973 = EDGE_LOOP ( 'NONE', ( #1669, #1696, #1697, #1700 ) ) ; +#1974 = EDGE_LOOP ( 'NONE', ( #2277, #2643, #1547, #2197, #1275 ) ) ; +#1975 = EDGE_CURVE ( 'NONE', #976, #2672, #2487, .T. ) ; +#1976 = ORIENTED_EDGE ( 'NONE', *, *, #1233, .T. ) ; +#1977 = CYLINDRICAL_SURFACE ( 'NONE', #2014, 4.698999999999999800 ) ; +#1978 = EDGE_LOOP ( 'NONE', ( #1571, #1604, #1637, #1663 ) ) ; +#1979 = AXIS2_PLACEMENT_3D ( 'NONE', #2553, #1164, #2805 ) ; +#1980 = EDGE_LOOP ( 'NONE', ( #2821, #2547, #2581, #2590 ) ) ; +#1981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1982 = CIRCLE ( 'NONE', #2018, 3.749999999999997800 ) ; +#1983 = EDGE_CURVE ( 'NONE', #1927, #1481, #2481, .T. ) ; +#1984 = CIRCLE ( 'NONE', #2027, 4.953000000000000300 ) ; +#1985 = ADVANCED_FACE ( 'NONE', ( #926 ), #459, .T. ) ; +#1986 = DIRECTION ( 'NONE', ( 1.000000000000000000, -7.170190367370802100E-015, 0.0000000000000000000 ) ) ; +#1987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1988 = CARTESIAN_POINT ( 'NONE', ( 7.535718860888822600, -41.22155115697168500, 39.81142960067295200 ) ) ; +#1989 = FACE_OUTER_BOUND ( 'NONE', #558, .T. ) ; +#1990 = CARTESIAN_POINT ( 'NONE', ( -20.99288557151405500, -15.39626567451824400, 40.33561236390519900 ) ) ; +#1991 = VECTOR ( 'NONE', #278, 1000.000000000000000 ) ; +#1992 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.27199999999999800 ) ) ; +#1993 = EDGE_CURVE ( 'NONE', #2423, #710, #2450, .T. ) ; +#1994 = EDGE_CURVE ( 'NONE', #2223, #1044, #2446, .T. ) ; +#1995 = CIRCLE ( 'NONE', #36, 15.00000000000000400 ) ; +#1996 = AXIS2_PLACEMENT_3D ( 'NONE', #1125, #1327, #922 ) ; +#1997 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 40.00000000000000000 ) ) ; +#1998 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #978, #977, #971 ), + ( #970, #963, #960 ), + ( #949, #946, #939 ), + ( #935, #889, #870 ), + ( #865, #860, #849 ), + ( #841, #837, #828 ), + ( #812, #805, #802 ), + ( #787, #785, #776 ), + ( #775, #767, #765 ), + ( #758, #754, #744 ), + ( #742, #738, #733 ), + ( #726, #722, #1223 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03683585975729857000, 0.03820604089774278000, 0.03889113146796488500, 0.03957622203818698900, 0.04094640317863119900, 0.04231658431907541600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865486800, 1.000000000000000000), + ( 1.000000000000000000, 0.6962713838317251500, 1.000000000000000000), + ( 1.000000000000000000, 0.6838436495741622200, 1.000000000000000000), + ( 1.000000000000000000, 0.6647867734087477000, 1.000000000000000000), + ( 1.000000000000000000, 0.6583654817850204100, 1.000000000000000000), + ( 1.000000000000000000, 0.6457501437482844300, 1.000000000000000000), + ( 1.000000000000000000, 0.6395364128717484500, 1.000000000000000000), + ( 1.000000000000000000, 0.6221906439529006900, 1.000000000000000000), + ( 1.000000000000000000, 0.6122532625758349000, 1.000000000000000000), + ( 1.000000000000000000, 0.5983464453983448100, 1.000000000000000000), + ( 1.000000000000000000, 0.5944040879548354600, 1.000000000000000000), + ( 1.000000000000000000, 0.5944745579080742400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1999 = FACE_OUTER_BOUND ( 'NONE', #1318, .T. ) ; +#2000 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2001 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#2002 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2003 = AXIS2_PLACEMENT_3D ( 'NONE', #1138, #2770, #1338 ) ; +#2004 = CARTESIAN_POINT ( 'NONE', ( -35.07059174458554200, -19.15882313949061100, 0.9952938836943073800 ) ) ; +#2005 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2006 = ADVANCED_FACE ( 'NONE', ( #2472 ), #2431, .T. ) ; +#2007 = ORIENTED_EDGE ( 'NONE', *, *, #1040, .F. ) ; +#2008 = CARTESIAN_POINT ( 'NONE', ( -4.669697710914434200, -0.6100319083832483900, 37.50000000000000000 ) ) ; +#2009 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ; +#2010 = CARTESIAN_POINT ( 'NONE', ( -28.04482217976522700, -7.339793204850257000, 30.00000000000000000 ) ) ; +#2011 = CARTESIAN_POINT ( 'NONE', ( 22.68160739325508500, -24.22006893171638400, 30.00000000000000000 ) ) ; +#2012 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#2013 = VERTEX_POINT ( 'NONE', #1106 ) ; +#2014 = AXIS2_PLACEMENT_3D ( 'NONE', #1965, #701, #707 ) ; +#2015 = AXIS2_PLACEMENT_3D ( 'NONE', #1095, #1151, #1184 ) ; +#2016 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ; +#2017 = CARTESIAN_POINT ( 'NONE', ( 3.749999999999997800, -20.00000000000000000, 40.00000000000000000 ) ) ; +#2018 = AXIS2_PLACEMENT_3D ( 'NONE', #1523, #305, #1741 ) ; +#2019 = CARTESIAN_POINT ( 'NONE', ( 6.076055247885547800, 3.860978324808687700, 37.17038346254926800 ) ) ; +#2020 = ORIENTED_EDGE ( 'NONE', *, *, #732, .T. ) ; +#2021 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#2022 = VERTEX_POINT ( 'NONE', #2220 ) ; +#2023 = ORIENTED_EDGE ( 'NONE', *, *, #2119, .T. ) ; +#2024 = ORIENTED_EDGE ( 'NONE', *, *, #618, .T. ) ; +#2025 = ADVANCED_FACE ( 'NONE', ( #2452 ), #2415, .F. ) ; +#2026 = VECTOR ( 'NONE', #2556, 999.9999999999998900 ) ; +#2027 = AXIS2_PLACEMENT_3D ( 'NONE', #313, #1757, #525 ) ; +#2028 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -50.00000000000000000, 3.000000000000000000 ) ) ; +#2029 = EDGE_LOOP ( 'NONE', ( #2103, #2109, #2140, #2179 ) ) ; +#2030 = ORIENTED_EDGE ( 'NONE', *, *, #1230, .F. ) ; +#2031 = CIRCLE ( 'NONE', #2037, 4.698999999999998100 ) ; +#2032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2033 = CIRCLE ( 'NONE', #2075, 7.199000000000000700 ) ; +#2034 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231598400, 34.86089611231578500, 30.00000000000000000 ) ) ; +#2035 = CARTESIAN_POINT ( 'NONE', ( 19.38996809162363600, -24.66969771091559600, 37.50000000000000000 ) ) ; +#2036 = CIRCLE ( 'NONE', #2041, 3.749999999999997800 ) ; +#2037 = AXIS2_PLACEMENT_3D ( 'NONE', #2082, #80, #1505 ) ; +#2038 = DIRECTION ( 'NONE', ( -0.8574929257125434300, -0.0000000000000000000, -0.5144957554275280100 ) ) ; +#2039 = VECTOR ( 'NONE', #1773, 1000.000000000000000 ) ; +#2040 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1465, #1358, #1352, #241, #1664, #1332, #1281, #1267, #1259, #1251 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001488298111837646700, 0.002976596223675293300, 0.004464894335512940000, 0.005953192447350586600 ), + .UNSPECIFIED. ) ; +#2041 = AXIS2_PLACEMENT_3D ( 'NONE', #549, #2032, #749 ) ; +#2042 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001800, -15.20100000000006800, 17.27199999999999800 ) ) ; +#2043 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231568600, 34.86089611231624700, 40.00000000000000000 ) ) ; +#2044 = LINE ( 'NONE', #2568, #1991 ) ; +#2045 = CARTESIAN_POINT ( 'NONE', ( -12.66020679514984300, 8.044822179765182200, 30.00000000000000000 ) ) ; +#2046 = EDGE_CURVE ( 'NONE', #1015, #653, #2417, .T. ) ; +#2047 = CARTESIAN_POINT ( 'NONE', ( 6.076055247885601100, -43.86097832480860600, 37.17038346254926800 ) ) ; +#2048 = LINE ( 'NONE', #557, #2026 ) ; +#2049 = AXIS2_PLACEMENT_3D ( 'NONE', #2532, #730, #325 ) ; +#2050 = EDGE_CURVE ( 'NONE', #1508, #1894, #2445, .T. ) ; +#2051 = VERTEX_POINT ( 'NONE', #2488 ) ; +#2052 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, -40.00000000000000000, 17.27199999999999800 ) ) ; +#2053 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #314, #933 ) ; +#2054 = ORIENTED_EDGE ( 'NONE', *, *, #854, .F. ) ; +#2055 = CARTESIAN_POINT ( 'NONE', ( -22.26557984747237000, -15.87219910080419200, 37.17038346256048700 ) ) ; +#2056 = CARTESIAN_POINT ( 'NONE', ( -18.59594911601468000, -27.06075365065096200, 40.00000000000000000 ) ) ; +#2057 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.491481338843133400E-015, 0.0000000000000000000 ) ) ; +#2058 = VERTEX_POINT ( 'NONE', #276 ) ; +#2059 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005300, -24.79899999999979300, 17.27199999999999800 ) ) ; +#2060 = CARTESIAN_POINT ( 'NONE', ( 22.33029440727584400, -24.08667857517011200, 37.17038346254926800 ) ) ; +#2061 = VERTEX_POINT ( 'NONE', #498 ) ; +#2062 = EDGE_CURVE ( 'NONE', #1044, #1740, #2406, .T. ) ; +#2063 = CARTESIAN_POINT ( 'NONE', ( -7.060753650650952700, -1.404050883985333200, 37.50000000000000000 ) ) ; +#2064 = VERTEX_POINT ( 'NONE', #285 ) ; +#2065 = AXIS2_PLACEMENT_3D ( 'NONE', #1346, #118, #1543 ) ; +#2066 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #1536, #319 ) ; +#2067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2068 = FACE_OUTER_BOUND ( 'NONE', #651, .T. ) ; +#2069 = CARTESIAN_POINT ( 'NONE', ( -20.39327955109970600, -12.51412872635862600, 39.90126456779095300 ) ) ; +#2070 = CARTESIAN_POINT ( 'NONE', ( -20.56778971602703300, -24.66695955642562100, 37.36541199509918000 ) ) ; +#2071 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ; +#2072 = EDGE_LOOP ( 'NONE', ( #1354, #1379, #1389, #1394 ) ) ; +#2073 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.613946018757868500E-015, 0.0000000000000000000 ) ) ; +#2074 = CYLINDRICAL_SURFACE ( 'NONE', #2053, 4.952999999999999400 ) ; +#2075 = AXIS2_PLACEMENT_3D ( 'NONE', #1355, #125, #1552 ) ; +#2076 = PLANE ( 'NONE', #2719 ) ; +#2077 = VERTEX_POINT ( 'NONE', #1727 ) ; +#2078 = VERTEX_POINT ( 'NONE', #2245 ) ; +#2079 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .T. ) ; +#2080 = CIRCLE ( 'NONE', #2065, 15.00000000000000000 ) ; +#2081 = AXIS2_PLACEMENT_3D ( 'NONE', #1758, #526, #2005 ) ; +#2082 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 37.17038346254926800 ) ) ; +#2083 = LINE ( 'NONE', #2272, #2039 ) ; +#2084 = CARTESIAN_POINT ( 'NONE', ( -4.953000000000000300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2085 = FACE_OUTER_BOUND ( 'NONE', #429, .T. ) ; +#2086 = CARTESIAN_POINT ( 'NONE', ( -22.13312737342141600, -24.19669179564797200, 40.53108866026944000 ) ) ; +#2087 = PLANE ( 'NONE', #2382 ) ; +#2088 = FACE_OUTER_BOUND ( 'NONE', #2508, .T. ) ; +#2089 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2090 = EDGE_CURVE ( 'NONE', #2114, #2858, #2411, .T. ) ; +#2091 = CARTESIAN_POINT ( 'NONE', ( 23.83429046972854000, -26.96148304775142900, 39.56051128339902300 ) ) ; +#2092 = CIRCLE ( 'NONE', #2081, 3.749999999999997800 ) ; +#2093 = AXIS2_PLACEMENT_3D ( 'NONE', #1139, #2771, #1339 ) ; +#2094 = DIRECTION ( 'NONE', ( -1.047444401652940000E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2095 = CIRCLE ( 'NONE', #2093, 4.698999999999999800 ) ; +#2096 = AXIS2_PLACEMENT_3D ( 'NONE', #509, #1981, #1330 ) ; +#2097 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.999999999999998200, 0.0000000000000000000 ) ) ; +#2098 = EDGE_CURVE ( 'NONE', #917, #1248, #450, .T. ) ; +#2099 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.047444401652940000E-014, -0.0000000000000000000 ) ) ; +#2100 = VERTEX_POINT ( 'NONE', #2758 ) ; +#2101 = AXIS2_PLACEMENT_3D ( 'NONE', #1966, #2225, #1729 ) ; +#2102 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2103 = ORIENTED_EDGE ( 'NONE', *, *, #317, .F. ) ; +#2104 = CARTESIAN_POINT ( 'NONE', ( -19.08353450425795500, -24.60876252318503900, 37.50000000000000000 ) ) ; +#2105 = VERTEX_POINT ( 'NONE', #1336 ) ; +#2106 = CARTESIAN_POINT ( 'NONE', ( 20.51739879649550600, -24.67968765587120200, 40.25375557149963200 ) ) ; +#2107 = EDGE_CURVE ( 'NONE', #1261, #2077, #2376, .T. ) ; +#2108 = CARTESIAN_POINT ( 'NONE', ( 19.83840337468879500, -15.28919825977556200, 40.13955959771968900 ) ) ; +#2109 = ORIENTED_EDGE ( 'NONE', *, *, #1518, .F. ) ; +#2110 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 0.0000000000000000000 ) ) ; +#2111 = ORIENTED_EDGE ( 'NONE', *, *, #2397, .F. ) ; +#2112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2113 = AXIS2_PLACEMENT_3D ( 'NONE', #1992, #719, #2257 ) ; +#2114 = VERTEX_POINT ( 'NONE', #90 ) ; +#2115 = DIRECTION ( 'NONE', ( 1.000000000000000000, 9.638691351447739000E-016, 0.0000000000000000000 ) ) ; +#2116 = ORIENTED_EDGE ( 'NONE', *, *, #2414, .T. ) ; +#2117 = FACE_OUTER_BOUND ( 'NONE', #1942, .T. ) ; +#2118 = EDGE_CURVE ( 'NONE', #2810, #2064, #2434, .T. ) ; +#2119 = EDGE_CURVE ( 'NONE', #2462, #2751, #2409, .T. ) ; +#2120 = CARTESIAN_POINT ( 'NONE', ( 21.44066269637525900, -24.48260198529524300, 37.24192922384551000 ) ) ; +#2121 = CIRCLE ( 'NONE', #1493, 50.00000000000000000 ) ; +#2122 = ORIENTED_EDGE ( 'NONE', *, *, #2737, .T. ) ; +#2123 = VECTOR ( 'NONE', #923, 999.9999999999998900 ) ; +#2124 = AXIS2_PLACEMENT_3D ( 'NONE', #87, #1517, #290 ) ; +#2125 = CIRCLE ( 'NONE', #2113, 4.799000000000000400 ) ; +#2126 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 40.00100000000000500 ) ) ; +#2127 = AXIS2_PLACEMENT_3D ( 'NONE', #909, #2491, #1120 ) ; +#2128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2129 = TOROIDAL_SURFACE ( 'NONE', #2049, 7.199000000000000700, 2.500000000000000000 ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999997200, -17.49999999999968700, 0.0000000000000000000 ) ) ; +#2131 = EDGE_CURVE ( 'NONE', #2423, #820, #2396, .T. ) ; +#2132 = CARTESIAN_POINT ( 'NONE', ( 4.608762523184977600, -0.9164654957420117500, 39.99999999999999300 ) ) ; +#2133 = LINE ( 'NONE', #1309, #2123 ) ; +#2134 = DIRECTION ( 'NONE', ( -0.8440137863433242500, 0.5363214786510097600, 1.612466026455800900E-015 ) ) ; +#2135 = TOROIDAL_SURFACE ( 'NONE', #2101, 4.799000000000000400, 0.1000000000000000100 ) ; +#2136 = AXIS2_PLACEMENT_3D ( 'NONE', #1506, #279, #1721 ) ; +#2137 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.37200000000000000 ) ) ; +#2138 = TOROIDAL_SURFACE ( 'NONE', #2096, 60.00000000000000700, 10.00000000000000000 ) ; +#2139 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2140 = ORIENTED_EDGE ( 'NONE', *, *, #1666, .F. ) ; +#2141 = AXIS2_PLACEMENT_3D ( 'NONE', #1935, #2209, #1947 ) ; +#2142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2143 = VERTEX_POINT ( 'NONE', #101 ) ; +#2144 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2145 = AXIS2_PLACEMENT_3D ( 'NONE', #2730, #1305, #69 ) ; +#2146 = VERTEX_POINT ( 'NONE', #1154 ) ; +#2147 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#2148 = ORIENTED_EDGE ( 'NONE', *, *, #1083, .F. ) ; +#2149 = CARTESIAN_POINT ( 'NONE', ( 7.242913404669998600, -0.8805310448514268600, 40.00000000000000000 ) ) ; +#2150 = VERTEX_POINT ( 'NONE', #940 ) ; +#2151 = CARTESIAN_POINT ( 'NONE', ( 4.401140731863613100, -41.68227820815343400, 40.46087376877419900 ) ) ; +#2152 = EDGE_LOOP ( 'NONE', ( #1417, #1421, #1425, #1443 ) ) ; +#2153 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.27199999999999800 ) ) ; +#2154 = ORIENTED_EDGE ( 'NONE', *, *, #2098, .F. ) ; +#2155 = AXIS2_PLACEMENT_3D ( 'NONE', #2670, #223, #1888 ) ; +#2156 = ORIENTED_EDGE ( 'NONE', *, *, #2260, .T. ) ; +#2157 = CIRCLE ( 'NONE', #2136, 60.00000000000000700 ) ; +#2158 = ORIENTED_EDGE ( 'NONE', *, *, #2251, .F. ) ; +#2159 = ORIENTED_EDGE ( 'NONE', *, *, #1402, .F. ) ; +#2160 = FACE_OUTER_BOUND ( 'NONE', #1937, .T. ) ; +#2161 = FACE_OUTER_BOUND ( 'NONE', #175, .T. ) ; +#2162 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.491481338843133400E-015, 0.0000000000000000000 ) ) ; +#2163 = AXIS2_PLACEMENT_3D ( 'NONE', #2464, #1094, #2722 ) ; +#2164 = EDGE_CURVE ( 'NONE', #2745, #1481, #2369, .T. ) ; +#2165 = CIRCLE ( 'NONE', #2124, 15.00000000000000000 ) ; +#2166 = CARTESIAN_POINT ( 'NONE', ( 4.634464845575389600, 0.8385465740467952200, 40.30864583454238900 ) ) ; +#2167 = CARTESIAN_POINT ( 'NONE', ( -54.86089611231598400, 34.86089611231578500, 30.00000000000000000 ) ) ; +#2168 = AXIS2_PLACEMENT_3D ( 'NONE', #267, #1699, #484 ) ; +#2169 = CIRCLE ( 'NONE', #2145, 4.698999999999999800 ) ; +#2170 = EDGE_CURVE ( 'NONE', #2051, #2022, #2371, .T. ) ; +#2171 = CIRCLE ( 'NONE', #2127, 10.00000000000000200 ) ; +#2172 = AXIS2_PLACEMENT_3D ( 'NONE', #1257, #20, #1456 ) ; +#2173 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2174 = CYLINDRICAL_SURFACE ( 'NONE', #2155, 4.698999999999999800 ) ; +#2175 = EDGE_CURVE ( 'NONE', #1061, #2745, #2366, .T. ) ; +#2176 = ADVANCED_FACE ( 'NONE', ( #2365 ), #1161, .F. ) ; +#2177 = TOROIDAL_SURFACE ( 'NONE', #2141, 4.999999999999999100, 10.00000000000000000 ) ; +#2178 = AXIS2_PLACEMENT_3D ( 'NONE', #2652, #2404, #1051 ) ; +#2179 = ORIENTED_EDGE ( 'NONE', *, *, #1569, .T. ) ; +#2180 = EDGE_CURVE ( 'NONE', #669, #2267, #2336, .T. ) ; +#2181 = EDGE_CURVE ( 'NONE', #2439, #975, #2331, .T. ) ; +#2182 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2184 = CARTESIAN_POINT ( 'NONE', ( -4.667106161888192200, -40.56654954608636400, 37.36558844647237300 ) ) ; +#2185 = VERTEX_POINT ( 'NONE', #1373 ) ; +#2186 = AXIS2_PLACEMENT_3D ( 'NONE', #2153, #846, #2413 ) ; +#2187 = CARTESIAN_POINT ( 'NONE', ( 4.482011987160012400, -41.44255112164361800, 37.24168871790590200 ) ) ; +#2188 = ORIENTED_EDGE ( 'NONE', *, *, #1348, .F. ) ; +#2189 = ORIENTED_EDGE ( 'NONE', *, *, #1983, .F. ) ; +#2190 = CARTESIAN_POINT ( 'NONE', ( -6.939420617012467900, -43.86901030922101800, 39.56051128341403700 ) ) ; +#2191 = ORIENTED_EDGE ( 'NONE', *, *, #52, .T. ) ; +#2192 = ORIENTED_EDGE ( 'NONE', *, *, #2131, .T. ) ; +#2193 = LINE ( 'NONE', #1578, #73 ) ; +#2194 = CIRCLE ( 'NONE', #2163, 15.00000000000000000 ) ; +#2195 = AXIS2_PLACEMENT_3D ( 'NONE', #835, #2389, #1043 ) ; +#2196 = EDGE_LOOP ( 'NONE', ( #986, #1017 ) ) ; +#2197 = ORIENTED_EDGE ( 'NONE', *, *, #1857, .F. ) ; +#2198 = CIRCLE ( 'NONE', #2168, 4.953000000000000300 ) ; +#2199 = AXIS2_PLACEMENT_3D ( 'NONE', #608, #597, #583 ) ; +#2200 = FACE_OUTER_BOUND ( 'NONE', #2772, .T. ) ; +#2201 = AXIS2_PLACEMENT_3D ( 'NONE', #637, #2144, #839 ) ; +#2202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2203 = ADVANCED_FACE ( 'NONE', ( #2356 ), #2322, .T. ) ; +#2204 = CARTESIAN_POINT ( 'NONE', ( 21.99713525185961400, -15.73610084812254000, 37.18630059465839800 ) ) ; +#2205 = FACE_OUTER_BOUND ( 'NONE', #2868, .T. ) ; +#2206 = AXIS2_PLACEMENT_3D ( 'NONE', #1821, #2341, #2380 ) ; +#2207 = CIRCLE ( 'NONE', #2172, 15.00000000000000000 ) ; +#2208 = CARTESIAN_POINT ( 'NONE', ( 4.401771557073423900, 1.680649365990499700, 40.46057594772484800 ) ) ; +#2209 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2210 = LINE ( 'NONE', #1446, #2213 ) ; +#2211 = CARTESIAN_POINT ( 'NONE', ( -6.076055247885580700, 3.860978324808637100, 37.17038346254926800 ) ) ; +#2212 = CARTESIAN_POINT ( 'NONE', ( -29.99999999999999300, -22.50000000000010300, 3.000000000000000000 ) ) ; +#2213 = VECTOR ( 'NONE', #10, 1000.000000000000000 ) ; +#2214 = ORIENTED_EDGE ( 'NONE', *, *, #1761, .T. ) ; +#2215 = VERTEX_POINT ( 'NONE', #2052 ) ; +#2216 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #1590, #387 ) ; +#2217 = CARTESIAN_POINT ( 'NONE', ( -7.485871273641243400, -40.39327955110050500, 39.90126456779091100 ) ) ; +#2218 = ORIENTED_EDGE ( 'NONE', *, *, #762, .T. ) ; +#2219 = AXIS2_PLACEMENT_3D ( 'NONE', #2063, #777, #2324 ) ; +#2220 = CARTESIAN_POINT ( 'NONE', ( 19.08353450425797600, -24.60876252318476500, 37.50000000000000000 ) ) ; +#2221 = ORIENTED_EDGE ( 'NONE', *, *, #2774, .F. ) ; +#2222 = EDGE_CURVE ( 'NONE', #1566, #2702, #2319, .T. ) ; +#2223 = VERTEX_POINT ( 'NONE', #979 ) ; +#2224 = AXIS2_PLACEMENT_3D ( 'NONE', #1565, #148, #1803 ) ; +#2225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2226 = VERTEX_POINT ( 'NONE', #563 ) ; +#2227 = VERTEX_POINT ( 'NONE', #157 ) ; +#2228 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ; +#2229 = FACE_OUTER_BOUND ( 'NONE', #1320, .T. ) ; +#2230 = CARTESIAN_POINT ( 'NONE', ( 3.966020782027251700, 2.520174628181139500, 37.17038346254926800 ) ) ; +#2231 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2232 = CIRCLE ( 'NONE', #1019, 7.931999999999999500 ) ; +#2233 = ORIENTED_EDGE ( 'NONE', *, *, #247, .T. ) ; +#2234 = CIRCLE ( 'NONE', #2201, 15.00000000000000000 ) ; +#2235 = DIRECTION ( 'NONE', ( 0.1950341552972968100, 0.9807964509863758000, -3.263585530387723800E-015 ) ) ; +#2236 = EDGE_CURVE ( 'NONE', #941, #2876, #2291, .T. ) ; +#2237 = LINE ( 'NONE', #1440, #2246 ) ; +#2238 = AXIS2_PLACEMENT_3D ( 'NONE', #1186, #2823, #1381 ) ; +#2239 = CARTESIAN_POINT ( 'NONE', ( -24.25410196865985300, -13.30528264672485000, 39.56051128339901600 ) ) ; +#2240 = AXIS2_PLACEMENT_3D ( 'NONE', #1616, #919, #2499 ) ; +#2241 = VECTOR ( 'NONE', #1435, 1000.000000000000000 ) ; +#2242 = AXIS2_PLACEMENT_3D ( 'NONE', #2028, #347, #1787 ) ; +#2243 = LINE ( 'NONE', #2885, #2241 ) ; +#2244 = CARTESIAN_POINT ( 'NONE', ( -4.608762523184967800, -0.9164654957420521600, 37.50000000000000000 ) ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( 28.04482217976515900, -7.339793204849938100, 30.00000000000000000 ) ) ; +#2246 = VECTOR ( 'NONE', #2892, 1000.000000000000000 ) ; +#2247 = AXIS2_PLACEMENT_3D ( 'NONE', #2563, #1172, #2812 ) ; +#2248 = CYLINDRICAL_SURFACE ( 'NONE', #359, 50.00000000000000000 ) ; +#2249 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2250 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 14.79019945774904000, 40.00000000000000000 ) ) ; +#2251 = EDGE_CURVE ( 'NONE', #139, #204, #2288, .T. ) ; +#2252 = ORIENTED_EDGE ( 'NONE', *, *, #854, .T. ) ; +#2253 = CARTESIAN_POINT ( 'NONE', ( 7.437346147242798200, -42.43508501108100700, 39.66997855777503200 ) ) ; +#2254 = CARTESIAN_POINT ( 'NONE', ( -22.11394624125733400, -12.51131668605541100, 39.70807550649125500 ) ) ; +#2255 = ORIENTED_EDGE ( 'NONE', *, *, #2090, .F. ) ; +#2256 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 9.999999999999998200, 3.000000000000000000 ) ) ; +#2257 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2258 = ORIENTED_EDGE ( 'NONE', *, *, #1658, .T. ) ; +#2259 = AXIS2_PLACEMENT_3D ( 'NONE', #1364, #132, #1555 ) ; +#2260 = EDGE_CURVE ( 'NONE', #2876, #2682, #2310, .T. ) ; +#2261 = CARTESIAN_POINT ( 'NONE', ( -28.04482217976522700, -7.339793204850258800, 0.0000000000000000000 ) ) ; +#2262 = ORIENTED_EDGE ( 'NONE', *, *, #480, .F. ) ; +#2263 = ADVANCED_FACE ( 'NONE', ( #2281 ), #2248, .F. ) ; +#2264 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2265 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#2266 = AXIS2_PLACEMENT_3D ( 'NONE', #2292, #964, #2549 ) ; +#2267 = VERTEX_POINT ( 'NONE', #587 ) ; +#2268 = TOROIDAL_SURFACE ( 'NONE', #2206, 4.999999999999999100, 10.00000000000000000 ) ; +#2269 = EDGE_LOOP ( 'NONE', ( #876, #903, #947, #980 ) ) ; +#2270 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2271 = ORIENTED_EDGE ( 'NONE', *, *, #306, .T. ) ; +#2272 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -50.00000000000000000, 3.000000000000000000 ) ) ; +#2273 = CIRCLE ( 'NONE', #364, 10.00000000000000200 ) ; +#2274 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2275 = VERTEX_POINT ( 'NONE', #788 ) ; +#2276 = EDGE_CURVE ( 'NONE', #1248, #66, #2273, .T. ) ; +#2277 = ORIENTED_EDGE ( 'NONE', *, *, #1150, .F. ) ; +#2278 = FACE_OUTER_BOUND ( 'NONE', #2787, .T. ) ; +#2279 = DIRECTION ( 'NONE', ( -0.5363214786510169800, 0.8440137863433195800, 0.0000000000000000000 ) ) ; +#2280 = CARTESIAN_POINT ( 'NONE', ( -6.076055247885561200, -43.86097832480867000, 37.17038346254926800 ) ) ; +#2281 = FACE_OUTER_BOUND ( 'NONE', #1973, .T. ) ; +#2282 = AXIS2_PLACEMENT_3D ( 'NONE', #332, #1779, #546 ) ; +#2283 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 30.00000000000000000 ) ) ; +#2284 = ADVANCED_FACE ( 'NONE', ( #2278 ), #2268, .T. ) ; +#2285 = EDGE_CURVE ( 'NONE', #975, #1743, #2243, .T. ) ; +#2286 = EDGE_CURVE ( 'NONE', #1781, #600, #324, .T. ) ; +#2287 = DIRECTION ( 'NONE', ( -0.8440137863433179200, -0.5363214786510194200, 0.0000000000000000000 ) ) ; +#2288 = LINE ( 'NONE', #358, #2360 ) ; +#2289 = AXIS2_PLACEMENT_3D ( 'NONE', #2280, #950, #2538 ) ; +#2290 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2291 = CIRCLE ( 'NONE', #2219, 2.500000000000000900 ) ; +#2292 = CARTESIAN_POINT ( 'NONE', ( 18.59594911601473300, -27.06075365065070300, 37.50000000000000000 ) ) ; +#2293 = AXIS2_PLACEMENT_3D ( 'NONE', #322, #1769, #537 ) ; +#2294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2295 = CARTESIAN_POINT ( 'NONE', ( -3.966020782027273500, 2.520174628181106600, 37.17038346254926800 ) ) ; +#2296 = CARTESIAN_POINT ( 'NONE', ( 22.33029440727434100, -15.91332142482851400, 37.17038346254926000 ) ) ; +#2297 = ORIENTED_EDGE ( 'NONE', *, *, #2785, .F. ) ; +#2298 = ADVANCED_FACE ( 'NONE', ( #2316 ), #629, .T. ) ; +#2299 = ORIENTED_EDGE ( 'NONE', *, *, #2861, .T. ) ; +#2300 = AXIS2_PLACEMENT_3D ( 'NONE', #1147, #2778, #1344 ) ; +#2301 = ORIENTED_EDGE ( 'NONE', *, *, #4, .T. ) ; +#2302 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.585095183685401100E-015, 0.0000000000000000000 ) ) ; +#2303 = CARTESIAN_POINT ( 'NONE', ( 22.52017462818113100, -23.96602078202705100, 37.17038346254926800 ) ) ; +#2304 = CARTESIAN_POINT ( 'NONE', ( 54.86089611231568600, 34.86089611231624700, 30.00000000000000000 ) ) ; +#2305 = AXIS2_PLACEMENT_3D ( 'NONE', #521, #2002, #727 ) ; +#2306 = DIRECTION ( 'NONE', ( -0.8440137863433252500, 0.5363214786510083200, 0.0000000000000000000 ) ) ; +#2307 = ORIENTED_EDGE ( 'NONE', *, *, #1118, .T. ) ; +#2308 = ORIENTED_EDGE ( 'NONE', *, *, #2679, .F. ) ; +#2309 = EDGE_LOOP ( 'NONE', ( #1050, #1071 ) ) ; +#2310 = CIRCLE ( 'NONE', #2216, 4.698999999999999800 ) ; +#2311 = AXIS2_PLACEMENT_3D ( 'NONE', #1308, #2480, #685 ) ; +#2312 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2313 = CYLINDRICAL_SURFACE ( 'NONE', #492, 4.698999999999998100 ) ; +#2314 = ORIENTED_EDGE ( 'NONE', *, *, #1150, .T. ) ; +#2315 = EDGE_LOOP ( 'NONE', ( #1077, #1471, #1503, #1535 ) ) ; +#2316 = FACE_OUTER_BOUND ( 'NONE', #908, .T. ) ; +#2317 = CARTESIAN_POINT ( 'NONE', ( -22.52017462818112400, -16.03397921797280300, 40.55200177161796700 ) ) ; +#2318 = CARTESIAN_POINT ( 'NONE', ( -19.47063019258127900, -24.68573759318286100, 40.07780935511204500 ) ) ; +#2319 = CIRCLE ( 'NONE', #2238, 10.00000000000000400 ) ; +#2320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2321 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2322 = TOROIDAL_SURFACE ( 'NONE', #2224, 7.198999999999999800, 2.500000000000000000 ) ; +#2323 = AXIS2_PLACEMENT_3D ( 'NONE', #892, #2727, #695 ) ; +#2324 = DIRECTION ( 'NONE', ( -0.9807964509863733600, -0.1950341552973082800, 0.0000000000000000000 ) ) ; +#2325 = VECTOR ( 'NONE', #2038, 999.9999999999998900 ) ; +#2326 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2327 = PLANE ( 'NONE', #385 ) ; +#2328 = AXIS2_PLACEMENT_3D ( 'NONE', #2743, #1314, #85 ) ; +#2329 = CARTESIAN_POINT ( 'NONE', ( 7.243065250951535600, -39.11990535527508000, 40.00000000000000000 ) ) ; +#2330 = CARTESIAN_POINT ( 'NONE', ( -21.14450687653331300, -27.53517367605350700, 39.82054932554416400 ) ) ; +#2331 = LINE ( 'NONE', #1538, #2325 ) ; +#2332 = CARTESIAN_POINT ( 'NONE', ( 3.966020782027287300, -42.52017462818108100, 37.17038346254926800 ) ) ; +#2333 = EDGE_CURVE ( 'NONE', #107, #2474, #2237, .T. ) ; +#2334 = CARTESIAN_POINT ( 'NONE', ( -4.452445505885891400, -41.51811602494493100, 37.23454346965972700 ) ) ; +#2335 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 40.00100000000000500 ) ) ; +#2336 = CIRCLE ( 'NONE', #2247, 4.698999999999999800 ) ; +#2337 = AXIS2_PLACEMENT_3D ( 'NONE', #699, #2235, #906 ) ; +#2338 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -19.99999999999979400, 30.00000000000000000 ) ) ; +#2339 = EDGE_CURVE ( 'NONE', #1900, #783, #2234, .T. ) ; +#2340 = ADVANCED_FACE ( 'NONE', ( #2229 ), #1638, .F. ) ; +#2341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2342 = CARTESIAN_POINT ( 'NONE', ( -18.59594911601467600, -27.06075365065102600, 40.00000000000000000 ) ) ; +#2343 = ORIENTED_EDGE ( 'NONE', *, *, #2494, .T. ) ; +#2344 = CARTESIAN_POINT ( 'NONE', ( -22.26878270547861800, -24.12576566995015200, 37.17038346232129000 ) ) ; +#2345 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2346 = VERTEX_POINT ( 'NONE', #1247 ) ; +#2347 = CARTESIAN_POINT ( 'NONE', ( 4.953000000000000300, 6.065675596176840400E-016, 17.27199999999999800 ) ) ; +#2348 = CARTESIAN_POINT ( 'NONE', ( 22.44317317252398800, -27.43526021317967100, 39.66920672263845700 ) ) ; +#2349 = ORIENTED_EDGE ( 'NONE', *, *, #1442, .T. ) ; +#2350 = ORIENTED_EDGE ( 'NONE', *, *, #674, .F. ) ; +#2351 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999998200, -24.95300000000007000, 17.27199999999999800 ) ) ; +#2352 = AXIS2_PLACEMENT_3D ( 'NONE', #810, #2361, #1016 ) ; +#2353 = ORIENTED_EDGE ( 'NONE', *, *, #1005, .F. ) ; +#2354 = CARTESIAN_POINT ( 'NONE', ( 19.08353450425797600, -24.60876252318476500, 37.50000000000000000 ) ) ; +#2355 = ORIENTED_EDGE ( 'NONE', *, *, #671, .T. ) ; +#2356 = FACE_OUTER_BOUND ( 'NONE', #877, .T. ) ; +#2357 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ; +#2358 = EDGE_LOOP ( 'NONE', ( #1938, #336, #2030, #887, #1618 ) ) ; +#2359 = LINE ( 'NONE', #2646, #41 ) ; +#2360 = VECTOR ( 'NONE', #2312, 1000.000000000000000 ) ; +#2361 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2362 = ORIENTED_EDGE ( 'NONE', *, *, #474, .T. ) ; +#2363 = ORIENTED_EDGE ( 'NONE', *, *, #226, .F. ) ; +#2364 = AXIS2_PLACEMENT_3D ( 'NONE', #1704, #489, #1954 ) ; +#2365 = FACE_OUTER_BOUND ( 'NONE', #1204, .T. ) ; +#2366 = CIRCLE ( 'NONE', #2259, 2.500000000000000900 ) ; +#2367 = CARTESIAN_POINT ( 'NONE', ( 21.14243978350118200, -27.53514070507203500, 39.82078459404208100 ) ) ; +#2368 = CARTESIAN_POINT ( 'NONE', ( 20.12179417283572700, -15.30023375552016600, 37.42584164642517700 ) ) ; +#2369 = CIRCLE ( 'NONE', #2282, 7.932000000000001300 ) ; +#2370 = CARTESIAN_POINT ( 'NONE', ( 20.24997846224723800, -12.53283964201812500, 39.91484582305717800 ) ) ; +#2371 = CIRCLE ( 'NONE', #2266, 2.499999999999998700 ) ; +#2372 = AXIS2_PLACEMENT_3D ( 'NONE', #1303, #65, #1496 ) ; +#2373 = CARTESIAN_POINT ( 'NONE', ( -19.06215095579543100, -27.22296949624699600, 39.99999999999999300 ) ) ; +#2374 = AXIS2_PLACEMENT_3D ( 'NONE', #1169, #1160, #1158 ) ; +#2375 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2376 = CIRCLE ( 'NONE', #2305, 4.799000000000001300 ) ; +#2377 = PRODUCT ( 'Barrel', 'Barrel', '', ( #1753 ) ) ; +#2378 = AXIS2_PLACEMENT_3D ( 'NONE', #2580, #1602, #1828 ) ; +#2379 = CARTESIAN_POINT ( 'NONE', ( 22.13137933377655400, -24.19759398692822900, 40.53086125768941600 ) ) ; +#2380 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2381 = ORIENTED_EDGE ( 'NONE', *, *, #2090, .T. ) ; +#2382 = AXIS2_PLACEMENT_3D ( 'NONE', #592, #2608, #1206 ) ; +#2383 = DIRECTION ( 'NONE', ( -0.8440137863433236900, 0.5363214786510104300, 0.0000000000000000000 ) ) ; +#2384 = ORIENTED_EDGE ( 'NONE', *, *, #1666, .T. ) ; +#2385 = ORIENTED_EDGE ( 'NONE', *, *, #4, .F. ) ; +#2386 = DIRECTION ( 'NONE', ( 0.8440137863433198100, 0.5363214786510166500, -2.356681115589246800E-015 ) ) ; +#2387 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#2388 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ; +#2389 = DIRECTION ( 'NONE', ( -0.5144957554275280100, 0.0000000000000000000, -0.8574929257125434300 ) ) ; +#2390 = AXIS2_PLACEMENT_3D ( 'NONE', #1219, #2863, #1415 ) ; +#2391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2392 = CARTESIAN_POINT ( 'NONE', ( -30.00000000000000700, -17.50000000000010700, 0.0000000000000000000 ) ) ; +#2393 = ORIENTED_EDGE ( 'NONE', *, *, #1230, .T. ) ; +#2394 = ORIENTED_EDGE ( 'NONE', *, *, #762, .F. ) ; +#2395 = EDGE_LOOP ( 'NONE', ( #2189, #2221, #2252, #466 ) ) ; +#2396 = CIRCLE ( 'NONE', #2289, 2.500000000000000900 ) ; +#2397 = EDGE_CURVE ( 'NONE', #1032, #554, #2210, .T. ) ; +#2398 = DIRECTION ( 'NONE', ( 3.502369222646491800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2399 = ORIENTED_EDGE ( 'NONE', *, *, #1356, .T. ) ; +#2400 = ORIENTED_EDGE ( 'NONE', *, *, #1480, .T. ) ; +#2401 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.059690869644413500E-014, 0.0000000000000000000 ) ) ; +#2402 = VECTOR ( 'NONE', #1117, 1000.000000000000000 ) ; +#2403 = AXIS2_PLACEMENT_3D ( 'NONE', #794, #2345, #1007 ) ; +#2404 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.047444401652940000E-014, 0.0000000000000000000 ) ) ; +#2405 = CARTESIAN_POINT ( 'NONE', ( -21.72519634693436800, -15.62348312679887000, 37.21134763931900800 ) ) ; +#2406 = LINE ( 'NONE', #1514, #2402 ) ; +#2407 = AXIS2_PLACEMENT_3D ( 'NONE', #581, #2073, #782 ) ; +#2408 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2409 = CIRCLE ( 'NONE', #2293, 0.1000000000000002600 ) ; +#2410 = CARTESIAN_POINT ( 'NONE', ( 4.667667316904847000, -0.6202424442541005800, 37.49999999444552400 ) ) ; +#2411 = LINE ( 'NONE', #705, #2442 ) ; +#2412 = CARTESIAN_POINT ( 'NONE', ( 7.535173676053815900, -41.14450687653484800, 39.82054932554395100 ) ) ; +#2413 = DIRECTION ( 'NONE', ( 3.502369222646491800E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2414 = EDGE_CURVE ( 'NONE', #232, #988, #117, .T. ) ; +#2415 = CYLINDRICAL_SURFACE ( 'NONE', #2311, 4.953000000000000300 ) ; +#2416 = AXIS2_PLACEMENT_3D ( 'NONE', #1375, #2057, #772 ) ; +#2417 = CIRCLE ( 'NONE', #2337, 2.500000000000000400 ) ; +#2418 = EDGE_CURVE ( 'NONE', #2513, #1777, #2207, .T. ) ; +#2419 = AXIS2_PLACEMENT_3D ( 'NONE', #1387, #163, #1585 ) ; +#2420 = CARTESIAN_POINT ( 'NONE', ( 4.564004543380398200, -41.15740456690301800, 37.28082034425731500 ) ) ; +#2421 = ORIENTED_EDGE ( 'NONE', *, *, #1515, .F. ) ; +#2422 = ADVANCED_FACE ( 'NONE', ( #2205 ), #2174, .F. ) ; +#2423 = VERTEX_POINT ( 'NONE', #1691 ) ; +#2424 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2425 = ORIENTED_EDGE ( 'NONE', *, *, #193, .T. ) ; +#2426 = ORIENTED_EDGE ( 'NONE', *, *, #53, .T. ) ; +#2427 = EDGE_CURVE ( 'NONE', #1927, #1566, #2194, .T. ) ; +#2428 = TOROIDAL_SURFACE ( 'NONE', #93, 7.199000000000001600, 2.500000000000000000 ) ; +#2429 = EDGE_LOOP ( 'NONE', ( #522, #1512, #628, #2705, #263, #804, #2628 ) ) ; +#2430 = AXIS2_PLACEMENT_3D ( 'NONE', #362, #1807, #571 ) ; +#2431 = CYLINDRICAL_SURFACE ( 'NONE', #2323, 15.00000000000000000 ) ; +#2432 = EDGE_LOOP ( 'NONE', ( #1817, #1829, #1854, #1890, #1926, #1962 ) ) ; +#2433 = FACE_OUTER_BOUND ( 'NONE', #2603, .T. ) ; +#2434 = CIRCLE ( 'NONE', #2300, 0.09999999999999939500 ) ; +#2435 = CARTESIAN_POINT ( 'NONE', ( -0.8411768605095086800, -55.07059174458554200, 0.9952938836943073800 ) ) ; +#2436 = AXIS2_PLACEMENT_3D ( 'NONE', #2304, #974, #2569 ) ; +#2437 = CARTESIAN_POINT ( 'NONE', ( -4.603734325481434000, -40.99288557151285100, 40.33561236390441000 ) ) ; +#2438 = ORIENTED_EDGE ( 'NONE', *, *, #813, .T. ) ; +#2439 = VERTEX_POINT ( 'NONE', #254 ) ; +#2440 = EDGE_CURVE ( 'NONE', #954, #3, #2198, .T. ) ; +#2441 = ADVANCED_FACE ( 'NONE', ( #2200 ), #2177, .T. ) ; +#2442 = VECTOR ( 'NONE', #1124, 1000.000000000000000 ) ; +#2443 = CARTESIAN_POINT ( 'NONE', ( 7.488328808035353400, -42.11668551953955100, 39.70776045654714200 ) ) ; +#2444 = AXIS2_PLACEMENT_3D ( 'NONE', #1369, #137, #1558 ) ; +#2445 = CIRCLE ( 'NONE', #2328, 2.500000000000001300 ) ; +#2446 = CIRCLE ( 'NONE', #2364, 15.00000000000000400 ) ; +#2447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2448 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2449 = CARTESIAN_POINT ( 'NONE', ( -4.127800899195706900, -42.26557984747263700, 37.17038346256048700 ) ) ; +#2450 = CIRCLE ( 'NONE', #2372, 4.698999999999999800 ) ; +#2451 = EDGE_CURVE ( 'NONE', #2150, #2835, #2169, .T. ) ; +#2452 = FACE_OUTER_BOUND ( 'NONE', #2788, .T. ) ; +#2453 = AXIS2_PLACEMENT_3D ( 'NONE', #2212, #2479, #1104 ) ; +#2454 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2455 = VERTEX_POINT ( 'NONE', #2475 ) ; +#2456 = EDGE_CURVE ( 'NONE', #2682, #1128, #316, .T. ) ; +#2457 = EDGE_CURVE ( 'NONE', #2143, #1057, #281, .T. ) ; +#2458 = CARTESIAN_POINT ( 'NONE', ( -6.694717353275218700, -44.25410196865986000, 39.56051128339901600 ) ) ; +#2459 = ORIENTED_EDGE ( 'NONE', *, *, #2222, .T. ) ; +#2460 = CARTESIAN_POINT ( 'NONE', ( 23.45361943473180600, -12.86936713072105800, 39.58173412484281800 ) ) ; +#2461 = EDGE_CURVE ( 'NONE', #941, #2185, #2157, .T. ) ; +#2462 = VERTEX_POINT ( 'NONE', #1115 ) ; +#2463 = CARTESIAN_POINT ( 'NONE', ( 7.132046354774249900, 3.450073135576633600, 39.58196787209180200 ) ) ; +#2464 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 30.00000000000000000 ) ) ; +#2465 = ORIENTED_EDGE ( 'NONE', *, *, #2679, .T. ) ; +#2466 = DIRECTION ( 'NONE', ( 0.8440137863433225800, -0.5363214786510119800, 0.0000000000000000000 ) ) ; +#2467 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2468 = ORIENTED_EDGE ( 'NONE', *, *, #2175, .F. ) ; +#2469 = ORIENTED_EDGE ( 'NONE', *, *, #585, .T. ) ; +#2470 = ORIENTED_EDGE ( 'NONE', *, *, #2181, .F. ) ; +#2471 = FACE_OUTER_BOUND ( 'NONE', #851, .T. ) ; +#2472 = FACE_OUTER_BOUND ( 'NONE', #280, .T. ) ; +#2473 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2474 = VERTEX_POINT ( 'NONE', #81 ) ; +#2475 = CARTESIAN_POINT ( 'NONE', ( 28.04482217976515900, -7.339793204849936400, 0.0000000000000000000 ) ) ; +#2476 = CARTESIAN_POINT ( 'NONE', ( -4.699784700602448200, -40.12092792643456100, 37.42594842690225200 ) ) ; +#2477 = VECTOR ( 'NONE', #399, 1000.000000000000000 ) ; +#2478 = AXIS2_PLACEMENT_3D ( 'NONE', #914, #2496, #1121 ) ; +#2479 = DIRECTION ( 'NONE', ( 3.491481338843133400E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2480 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2481 = CIRCLE ( 'NONE', #2390, 10.00000000000000200 ) ; +#2482 = FACE_OUTER_BOUND ( 'NONE', #1020, .T. ) ; +#2483 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2484 = CARTESIAN_POINT ( 'NONE', ( -19.08353450425795500, -24.60876252318503900, 37.50000000000000000 ) ) ; +#2485 = EDGE_CURVE ( 'NONE', #1900, #665, #2171, .T. ) ; +#2486 = TOROIDAL_SURFACE ( 'NONE', #2378, 7.199000000000000700, 2.500000000000000000 ) ; +#2487 = LINE ( 'NONE', #2856, #2477 ) ; +#2488 = CARTESIAN_POINT ( 'NONE', ( 18.59594911601470500, -27.06075365065075600, 40.00000000000000000 ) ) ; +#2489 = AXIS2_PLACEMENT_3D ( 'NONE', #1289, #676, #51 ) ; +#2490 = CARTESIAN_POINT ( 'NONE', ( -23.83429046972852600, -13.03851695224842500, 39.56051128339902300 ) ) ; +#2491 = DIRECTION ( 'NONE', ( 0.5363214786510119800, 0.8440137863433228000, 4.651847298432521400E-017 ) ) ; +#2492 = ORIENTED_EDGE ( 'NONE', *, *, #2461, .F. ) ; +#2493 = AXIS2_PLACEMENT_3D ( 'NONE', #871, #2447, #1082 ) ; +#2494 = EDGE_CURVE ( 'NONE', #1182, #976, #2165, .T. ) ; +#2495 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ; +#2496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2497 = CARTESIAN_POINT ( 'NONE', ( -0.8411768605095005800, 15.07059174458554000, 2.004706116305717600 ) ) ; +#2498 = ADVANCED_FACE ( 'NONE', ( #2161 ), #2135, .T. ) ; +#2499 = DIRECTION ( 'NONE', ( 3.491481338843133400E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2500 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2501 = AXIS2_PLACEMENT_3D ( 'NONE', #1436, #836, #2391 ) ; +#2502 = VERTEX_POINT ( 'NONE', #1317 ) ; +#2503 = EDGE_CURVE ( 'NONE', #539, #2858, #2133, .T. ) ; +#2504 = ORIENTED_EDGE ( 'NONE', *, *, #1776, .T. ) ; +#2505 = CARTESIAN_POINT ( 'NONE', ( 4.608762523184977600, -0.9164654957420059800, 37.50000000000000000 ) ) ; +#2506 = AXIS2_PLACEMENT_3D ( 'NONE', #1677, #462, #1922 ) ; +#2507 = EDGE_LOOP ( 'NONE', ( #1130, #129, #2301, #2071 ) ) ; +#2508 = EDGE_LOOP ( 'NONE', ( #2704, #2736, #1674, #1445 ) ) ; +#2509 = CIRCLE ( 'NONE', #2407, 0.09999999999999939500 ) ; +#2510 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001800, -15.04700000000007000, 17.27199999999999800 ) ) ; +#2511 = CARTESIAN_POINT ( 'NONE', ( 4.220068931716589600, 2.681607393255096100, 30.00000000000000000 ) ) ; +#2512 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .F. ) ; +#2513 = VERTEX_POINT ( 'NONE', #1126 ) ; +#2514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2515 = CIRCLE ( 'NONE', #2419, 60.00000000000000000 ) ; +#2516 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#2517 = CARTESIAN_POINT ( 'NONE', ( 6.960498961997067200, -43.83583913405927000, 39.56051128339901600 ) ) ; +#2518 = ORIENTED_EDGE ( 'NONE', *, *, #2180, .F. ) ; +#2519 = CARTESIAN_POINT ( 'NONE', ( -21.15572075692617200, -15.43558434499918000, 37.28105663171557200 ) ) ; +#2520 = FACE_OUTER_BOUND ( 'NONE', #1135, .T. ) ; +#2521 = AXIS2_PLACEMENT_3D ( 'NONE', #2126, #1231, #1427 ) ; +#2522 = ADVANCED_FACE ( 'NONE', ( #2117 ), #2138, .T. ) ; +#2523 = EDGE_CURVE ( 'NONE', #185, #209, #2125, .T. ) ; +#2524 = FACE_OUTER_BOUND ( 'NONE', #2309, .T. ) ; +#2525 = AXIS2_PLACEMENT_3D ( 'NONE', #425, #1872, #631 ) ; +#2526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2527 = CIRCLE ( 'NONE', #2403, 0.09999999999999939500 ) ; +#2528 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#2529 = VECTOR ( 'NONE', #2808, 1000.000000000000000 ) ; +#2530 = CARTESIAN_POINT ( 'NONE', ( -34.79019945774904700, -17.50000000000012100, 0.0000000000000000000 ) ) ; +#2531 = CIRCLE ( 'NONE', #2436, 50.00000000000000700 ) ; +#2532 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 37.50000000000000000 ) ) ; +#2533 = EDGE_CURVE ( 'NONE', #204, #2751, #2095, .T. ) ; +#2534 = DIRECTION ( 'NONE', ( -1.033672213818910400E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2535 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -19.99999999999979400, 39.56051128339900900 ) ) ; +#2536 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2537 = ORIENTED_EDGE ( 'NONE', *, *, #2485, .F. ) ; +#2538 = DIRECTION ( 'NONE', ( 0.8440137863433196900, 0.5363214786510165400, 0.0000000000000000000 ) ) ; +#2539 = AXIS2_PLACEMENT_3D ( 'NONE', #827, #2383, #1036 ) ; +#2540 = ORIENTED_EDGE ( 'NONE', *, *, #287, .F. ) ; +#2541 = AXIS2_PLACEMENT_3D ( 'NONE', #1576, #1550, #1489 ) ; +#2542 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2543 = VERTEX_POINT ( 'NONE', #515 ) ; +#2544 = AXIS2_PLACEMENT_3D ( 'NONE', #419, #1861, #623 ) ; +#2545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2546 = EDGE_CURVE ( 'NONE', #2586, #99, #2092, .T. ) ; +#2547 = ORIENTED_EDGE ( 'NONE', *, *, #861, .T. ) ; +#2548 = AXIS2_PLACEMENT_3D ( 'NONE', #1763, #530, #961 ) ; +#2549 = DIRECTION ( 'NONE', ( -0.1950341552972968400, -0.9807964509863756900, 0.0000000000000000000 ) ) ; +#2550 = ORIENTED_EDGE ( 'NONE', *, *, #2664, .F. ) ; +#2551 = ORIENTED_EDGE ( 'NONE', *, *, #2503, .T. ) ; +#2552 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005000, -24.69899999999979600, 37.43962887309924500 ) ) ; +#2553 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 30.00000000000000000 ) ) ; +#2554 = EDGE_LOOP ( 'NONE', ( #460, #2394, #689, #2468, #1869 ) ) ; +#2555 = ORIENTED_EDGE ( 'NONE', *, *, #47, .T. ) ; +#2556 = DIRECTION ( 'NONE', ( -2.993920548315346800E-015, 0.8574929257125434300, -0.5144957554275280100 ) ) ; +#2557 = ADVANCED_FACE ( 'NONE', ( #2085 ), #2074, .F. ) ; +#2558 = LINE ( 'NONE', #1166, #2529 ) ; +#2559 = FACE_BOUND ( 'NONE', #288, .T. ) ; +#2560 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2561 = CIRCLE ( 'NONE', #2430, 4.952999999999999400 ) ; +#2562 = AXIS2_PLACEMENT_3D ( 'NONE', #2110, #2112, #818 ) ; +#2563 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.37200000000000000 ) ) ; +#2564 = VECTOR ( 'NONE', #82, 1000.000000000000000 ) ; +#2565 = CIRCLE ( 'NONE', #2444, 2.499999999999999600 ) ; +#2566 = AXIS2_PLACEMENT_3D ( 'NONE', #2776, #936, #1141 ) ; +#2567 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.27199999999999800 ) ) ; +#2568 = CARTESIAN_POINT ( 'NONE', ( 3.749999999999997800, -20.00000000000000000, -0.001000000000001000100 ) ) ; +#2569 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2570 = EDGE_CURVE ( 'NONE', #1539, #2061, #2080, .T. ) ; +#2571 = CARTESIAN_POINT ( 'NONE', ( -22.13139152251598000, -24.19373014804706300, 37.17917958233368800 ) ) ; +#2572 = VECTOR ( 'NONE', #2467, 1000.000000000000000 ) ; +#2573 = AXIS2_PLACEMENT_3D ( 'NONE', #1997, #1333, #723 ) ; +#2574 = LINE ( 'NONE', #283, #2564 ) ; +#2575 = ADVANCED_FACE ( 'NONE', ( #2088 ), #2129, .T. ) ; +#2576 = LINE ( 'NONE', #1500, #2618 ) ; +#2577 = AXIS2_PLACEMENT_3D ( 'NONE', #2021, #743, #2290 ) ; +#2578 = CARTESIAN_POINT ( 'NONE', ( -19.08353450425796500, -15.39123747681510000, 40.00000000000000000 ) ) ; +#2579 = CARTESIAN_POINT ( 'NONE', ( -19.67646981698171500, -24.69724084051737400, 37.47635238510335400 ) ) ; +#2580 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 37.17038346254926800 ) ) ; +#2581 = ORIENTED_EDGE ( 'NONE', *, *, #1515, .T. ) ; +#2582 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00100000000000500 ) ) ; +#2583 = ORIENTED_EDGE ( 'NONE', *, *, #2181, .T. ) ; +#2584 = EDGE_CURVE ( 'NONE', #2439, #1743, #2083, .T. ) ; +#2585 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2586 = VERTEX_POINT ( 'NONE', #2017 ) ; +#2587 = AXIS2_PLACEMENT_3D ( 'NONE', #2535, #1152, #2786 ) ; +#2588 = EDGE_CURVE ( 'NONE', #1015, #917, #2033, .T. ) ; +#2589 = EDGE_CURVE ( 'NONE', #99, #2586, #2036, .T. ) ; +#2590 = ORIENTED_EDGE ( 'NONE', *, *, #2339, .F. ) ; +#2591 = CARTESIAN_POINT ( 'NONE', ( 7.404974154172360400, -42.57662236135764300, 39.65558495857839500 ) ) ; +#2592 = CARTESIAN_POINT ( 'NONE', ( -20.99427497393416800, -24.60343934113257800, 40.33585679829688800 ) ) ; +#2593 = CARTESIAN_POINT ( 'NONE', ( 4.193730148047001700, -42.13139152251596200, 37.17917958233369500 ) ) ; +#2594 = AXIS2_PLACEMENT_3D ( 'NONE', #1527, #308, #1748 ) ; +#2595 = CARTESIAN_POINT ( 'NONE', ( -4.193730148045324800, -42.13139152251909500, 37.17917958233354600 ) ) ; +#2596 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ; +#2597 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2598 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2599 = EDGE_LOOP ( 'NONE', ( #2258, #1860, #384, #1532, #1750, #1234 ) ) ; +#2600 = ORIENTED_EDGE ( 'NONE', *, *, #340, .T. ) ; +#2601 = ORIENTED_EDGE ( 'NONE', *, *, #2546, .F. ) ; +#2602 = CIRCLE ( 'NONE', #2478, 4.698999999999999800 ) ; +#2603 = EDGE_LOOP ( 'NONE', ( #1023, #1453, #1070, #2550 ) ) ; +#2604 = VERTEX_POINT ( 'NONE', #1783 ) ; +#2605 = ORIENTED_EDGE ( 'NONE', *, *, #2589, .F. ) ; +#2606 = LINE ( 'NONE', #904, #2572 ) ; +#2607 = CARTESIAN_POINT ( 'NONE', ( -23.87385472871069700, -26.93634227245514600, 39.56051128311398900 ) ) ; +#2608 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2609 = VERTEX_POINT ( 'NONE', #338 ) ; +#2610 = LINE ( 'NONE', #677, #2648 ) ; +#2611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2612 = CARTESIAN_POINT ( 'NONE', ( 20.98032425597107300, -27.54495902016454400, 39.83936141413544600 ) ) ; +#2613 = FACE_OUTER_BOUND ( 'NONE', #875, .T. ) ; +#2614 = FACE_OUTER_BOUND ( 'NONE', #872, .T. ) ; +#2615 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999997800, -20.00000000000000000, -0.001000000000001000100 ) ) ; +#2616 = AXIS2_PLACEMENT_3D ( 'NONE', #83, #506, #1970 ) ; +#2617 = CARTESIAN_POINT ( 'NONE', ( 19.47030278354116800, -24.68567248697215500, 40.07774354325408000 ) ) ; +#2618 = VECTOR ( 'NONE', #74, 1000.000000000000000 ) ; +#2619 = EDGE_CURVE ( 'NONE', #2226, #2146, #264, .T. ) ; +#2620 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.27199999999999800 ) ) ; +#2621 = VECTOR ( 'NONE', #259, 1000.000000000000000 ) ; +#2622 = AXIS2_PLACEMENT_3D ( 'NONE', #1416, #698, #2231 ) ; +#2623 = DIRECTION ( 'NONE', ( 3.540974639675049600E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2624 = CARTESIAN_POINT ( 'NONE', ( 34.79019945774906800, -22.49999999999963800, 0.0000000000000000000 ) ) ; +#2625 = ORIENTED_EDGE ( 'NONE', *, *, #2796, .F. ) ; +#2626 = CARTESIAN_POINT ( 'NONE', ( 20.56654954608602300, -24.66710616188801500, 37.36558844647157000 ) ) ; +#2627 = CARTESIAN_POINT ( 'NONE', ( 20.39475029890769500, -12.51394885031512100, 39.90112219381978800 ) ) ; +#2628 = ORIENTED_EDGE ( 'NONE', *, *, #1665, .T. ) ; +#2629 = CARTESIAN_POINT ( 'NONE', ( 20.97556746608115900, -12.46922879459322400, 39.83962769998239400 ) ) ; +#2630 = ORIENTED_EDGE ( 'NONE', *, *, #2701, .F. ) ; +#2631 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005000, -24.69899999999979600, 37.43962887309924500 ) ) ; +#2632 = ORIENTED_EDGE ( 'NONE', *, *, #1331, .F. ) ; +#2633 = AXIS2_PLACEMENT_3D ( 'NONE', #2511, #1131, #2764 ) ; +#2634 = EDGE_CURVE ( 'NONE', #799, #1097, #2048, .T. ) ; +#2635 = EDGE_CURVE ( 'NONE', #1613, #103, #2031, .T. ) ; +#2636 = CARTESIAN_POINT ( 'NONE', ( 23.86901030921851000, -26.93942061701065800, 39.56051128341486800 ) ) ; +#2637 = ORIENTED_EDGE ( 'NONE', *, *, #292, .T. ) ; +#2638 = AXIS2_PLACEMENT_3D ( 'NONE', #409, #1848, #619 ) ; +#2639 = FACE_OUTER_BOUND ( 'NONE', #1012, .T. ) ; +#2640 = ORIENTED_EDGE ( 'NONE', *, *, #1665, .F. ) ; +#2641 = ORIENTED_EDGE ( 'NONE', *, *, #1925, .F. ) ; +#2642 = VERTEX_POINT ( 'NONE', #541 ) ; +#2643 = ORIENTED_EDGE ( 'NONE', *, *, #1815, .F. ) ; +#2644 = AXIS2_PLACEMENT_3D ( 'NONE', #2620, #1221, #2865 ) ; +#2645 = CIRCLE ( 'NONE', #408, 2.500000000000000900 ) ; +#2646 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999997200, -17.49999999999972300, 3.000000000000000000 ) ) ; +#2647 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.047444401652940000E-014, 0.0000000000000000000 ) ) ; +#2648 = VECTOR ( 'NONE', #2202, 1000.000000000000000 ) ; +#2649 = CARTESIAN_POINT ( 'NONE', ( 4.646337173445275000, -40.71723937533558800, 37.34371698406747000 ) ) ; +#2650 = MANIFOLD_SOLID_BREP ( 'CirPattern6', #61 ) ; +#2651 = TOROIDAL_SURFACE ( 'NONE', #2489, 4.799000000000000400, 0.1000000000000000100 ) ; +#2652 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000002800, -22.49999999999968700, 3.000000000000000000 ) ) ; +#2653 = LINE ( 'NONE', #1692, #2621 ) ; +#2654 = AXIS2_PLACEMENT_3D ( 'NONE', #1209, #2611, #2857 ) ; +#2655 = AXIS2_PLACEMENT_3D ( 'NONE', #2387, #1475, #1468 ) ; +#2656 = DIRECTION ( 'NONE', ( 3.491481338843133400E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2657 = FACE_OUTER_BOUND ( 'NONE', #2708, .T. ) ; +#2658 = AXIS2_PLACEMENT_3D ( 'NONE', #2335, #1587, #582 ) ; +#2659 = CARTESIAN_POINT ( 'NONE', ( -4.220068931716600200, -42.68160739325507800, 30.00000000000000000 ) ) ; +#2660 = TOROIDAL_SURFACE ( 'NONE', #411, 4.799000000000000400, 0.1000000000000000100 ) ; +#2661 = CARTESIAN_POINT ( 'NONE', ( 7.130632869277964600, -43.45361943473311300, 39.58173412484278900 ) ) ; +#2662 = ORIENTED_EDGE ( 'NONE', *, *, #1321, .F. ) ; +#2663 = AXIS2_PLACEMENT_3D ( 'NONE', #594, #2089, #798 ) ; +#2664 = EDGE_CURVE ( 'NONE', #2665, #2586, #2044, .T. ) ; +#2665 = VERTEX_POINT ( 'NONE', #973 ) ; +#2666 = ORIENTED_EDGE ( 'NONE', *, *, #57, .F. ) ; +#2667 = CARTESIAN_POINT ( 'NONE', ( 4.710759043902398500, -0.1622191306211367400, 40.13945356267844000 ) ) ; +#2668 = CARTESIAN_POINT ( 'NONE', ( 4.196691795647534000, -42.13312737342455000, 40.53108866026782700 ) ) ; +#2669 = ORIENTED_EDGE ( 'NONE', *, *, #23, .T. ) ; +#2670 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 40.00100000000000500 ) ) ; +#2671 = AXIS2_PLACEMENT_3D ( 'NONE', #1189, #153, #2321 ) ; +#2672 = VERTEX_POINT ( 'NONE', #503 ) ; +#2673 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.491481338843133400E-015, -0.0000000000000000000 ) ) ; +#2674 = AXIS2_PLACEMENT_3D ( 'NONE', #1001, #2597, #1197 ) ; +#2675 = EDGE_LOOP ( 'NONE', ( #2601, #2605 ) ) ; +#2676 = ORIENTED_EDGE ( 'NONE', *, *, #203, .T. ) ; +#2677 = ORIENTED_EDGE ( 'NONE', *, *, #2062, .T. ) ; +#2678 = CIRCLE ( 'NONE', #210, 15.00000000000000000 ) ; +#2679 = EDGE_CURVE ( 'NONE', #2702, #2185, #236, .T. ) ; +#2680 = ADVANCED_FACE ( 'NONE', ( #1999 ), #1977, .F. ) ; +#2681 = ORIENTED_EDGE ( 'NONE', *, *, #1233, .F. ) ; +#2682 = VERTEX_POINT ( 'NONE', #2505 ) ; +#2683 = CARTESIAN_POINT ( 'NONE', ( 4.263899151876394500, -41.99713525186179200, 37.18630059465999000 ) ) ; +#2684 = EDGE_LOOP ( 'NONE', ( #1383, #58, #178, #207, #233, #250, #655, #704, #741 ) ) ; +#2685 = CIRCLE ( 'NONE', #220, 2.500000000000000000 ) ; +#2686 = AXIS2_PLACEMENT_3D ( 'NONE', #605, #2099, #809 ) ; +#2687 = FACE_OUTER_BOUND ( 'NONE', #1236, .T. ) ; +#2688 = AXIS2_PLACEMENT_3D ( 'NONE', #2833, #1390, #165 ) ; +#2689 = CYLINDRICAL_SURFACE ( 'NONE', #2521, 4.698999999999999800 ) ; +#2690 = EDGE_CURVE ( 'NONE', #2665, #982, #1982, .T. ) ; +#2691 = CIRCLE ( 'NONE', #2506, 4.952999999999999400 ) ; +#2692 = CARTESIAN_POINT ( 'NONE', ( 7.533617321398414100, -41.39265834089656000, 39.79162264665460200 ) ) ; +#2693 = CIRCLE ( 'NONE', #2525, 7.199000000000000700 ) ; +#2694 = ADVANCED_FACE ( 'NONE', ( #1989 ), #1953, .F. ) ; +#2695 = CIRCLE ( 'NONE', #2493, 15.00000000000000400 ) ; +#2696 = EDGE_CURVE ( 'NONE', #33, #103, #1955, .T. ) ; +#2697 = CARTESIAN_POINT ( 'NONE', ( -7.488683313943801600, -42.11394624125716000, 39.70807550649142600 ) ) ; +#2698 = CARTESIAN_POINT ( 'NONE', ( 7.511306284031357800, -40.64600045540547100, 39.87524548164969900 ) ) ; +#2699 = ORIENTED_EDGE ( 'NONE', *, *, #1658, .F. ) ; +#2700 = AXIS2_PLACEMENT_3D ( 'NONE', #753, #969, #2560 ) ; +#2701 = EDGE_CURVE ( 'NONE', #213, #436, #1984, .T. ) ; +#2702 = VERTEX_POINT ( 'NONE', #106 ) ; +#2703 = CARTESIAN_POINT ( 'NONE', ( -3.966020782027262400, -42.52017462818113100, 40.55200177161795900 ) ) ; +#2704 = ORIENTED_EDGE ( 'NONE', *, *, #2170, .T. ) ; +#2705 = ORIENTED_EDGE ( 'NONE', *, *, #585, .F. ) ; +#2706 = AXIS2_PLACEMENT_3D ( 'NONE', #1181, #2820, #1377 ) ; +#2707 = AXIS2_PLACEMENT_3D ( 'NONE', #1350, #1343, #1340 ) ; +#2708 = EDGE_LOOP ( 'NONE', ( #1568, #2023, #1898, #1749 ) ) ; +#2709 = ORIENTED_EDGE ( 'NONE', *, *, #2451, .T. ) ; +#2710 = EDGE_LOOP ( 'NONE', ( #1706, #756 ) ) ; +#2711 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2712 = FACE_OUTER_BOUND ( 'NONE', #329, .T. ) ; +#2713 = AXIS2_PLACEMENT_3D ( 'NONE', #593, #354, #796 ) ; +#2714 = CARTESIAN_POINT ( 'NONE', ( -7.467160357981669000, 0.2499784622472372200, 39.91484582305717100 ) ) ; +#2715 = FACE_OUTER_BOUND ( 'NONE', #2554, .T. ) ; +#2716 = VERTEX_POINT ( 'NONE', #932 ) ; +#2717 = CIRCLE ( 'NONE', #2544, 4.698999999999999800 ) ; +#2718 = CARTESIAN_POINT ( 'NONE', ( 22.33165079996560500, -15.91418333292061900, 40.55200177192275400 ) ) ; +#2719 = AXIS2_PLACEMENT_3D ( 'NONE', #1586, #1594, #393 ) ; +#2720 = FACE_OUTER_BOUND ( 'NONE', #372, .T. ) ; +#2721 = CARTESIAN_POINT ( 'NONE', ( 4.264943925799717500, 1.994864123965727200, 37.18647590509636600 ) ) ; +#2722 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2723 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ; +#2724 = CARTESIAN_POINT ( 'NONE', ( -7.060753650650952700, -1.404050883985333200, 40.00000000000000000 ) ) ; +#2725 = PLANE ( 'NONE', #2453 ) ; +#2726 = LINE ( 'NONE', #1359, #2723 ) ; +#2727 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2728 = CIRCLE ( 'NONE', #2539, 9.999999999999998200 ) ; +#2729 = CIRCLE ( 'NONE', #2562, 15.00000000000000000 ) ; +#2730 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 37.17038346254926800 ) ) ; +#2731 = AXIS2_PLACEMENT_3D ( 'NONE', #2582, #164, #2831 ) ; +#2732 = CARTESIAN_POINT ( 'NONE', ( -4.679687655870814000, -40.51739879649591100, 40.25375557149965300 ) ) ; +#2733 = ORIENTED_EDGE ( 'NONE', *, *, #1905, .F. ) ; +#2734 = EDGE_CURVE ( 'NONE', #539, #2275, #1945, .T. ) ; +#2735 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999998100, 0.4400314254016186000, 37.38882461611263600 ) ) ; +#2736 = ORIENTED_EDGE ( 'NONE', *, *, #1424, .F. ) ; +#2737 = EDGE_CURVE ( 'NONE', #2061, #2746, #219, .T. ) ; +#2738 = ORIENTED_EDGE ( 'NONE', *, *, #795, .T. ) ; +#2739 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2740 = ORIENTED_EDGE ( 'NONE', *, *, #2170, .F. ) ; +#2741 = EDGE_CURVE ( 'NONE', #2227, #2543, #1995, .T. ) ; +#2742 = ORIENTED_EDGE ( 'NONE', *, *, #480, .T. ) ; +#2743 = CARTESIAN_POINT ( 'NONE', ( 18.59594911601466200, -12.93924634934883000, 37.50000000000000000 ) ) ; +#2744 = ORIENTED_EDGE ( 'NONE', *, *, #2118, .T. ) ; +#2745 = VERTEX_POINT ( 'NONE', #1771 ) ; +#2746 = VERTEX_POINT ( 'NONE', #1155 ) ; +#2747 = VECTOR ( 'NONE', #122, 1000.000000000000000 ) ; +#2748 = AXIS2_PLACEMENT_3D ( 'NONE', #773, #2320, #985 ) ; +#2749 = EDGE_LOOP ( 'NONE', ( #789, #817 ) ) ; +#2750 = CARTESIAN_POINT ( 'NONE', ( -22.44317317252397700, -12.56473978682018500, 39.66920672263845700 ) ) ; +#2751 = VERTEX_POINT ( 'NONE', #2794 ) ; +#2752 = ORIENTED_EDGE ( 'NONE', *, *, #1388, .F. ) ; +#2753 = LINE ( 'NONE', #113, #2747 ) ; +#2754 = EDGE_CURVE ( 'NONE', #799, #2746, #1920, .T. ) ; +#2755 = CIRCLE ( 'NONE', #2577, 4.953000000000000300 ) ; +#2756 = AXIS2_PLACEMENT_3D ( 'NONE', #2047, #763, #2306 ) ; +#2757 = CARTESIAN_POINT ( 'NONE', ( -4.669697710915797600, -39.38996809162361500, 37.50000000000000000 ) ) ; +#2758 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999994700, -15.04699999999979300, 17.27199999999999800 ) ) ; +#2759 = FACE_OUTER_BOUND ( 'NONE', #2072, .T. ) ; +#2760 = CARTESIAN_POINT ( 'NONE', ( -20.64432878848936100, -12.48884024585508700, 39.87542036636900600 ) ) ; +#2761 = AXIS2_PLACEMENT_3D ( 'NONE', #2034, #2545, #751 ) ; +#2762 = CYLINDRICAL_SURFACE ( 'NONE', #2566, 4.953000000000000300 ) ; +#2763 = LINE ( 'NONE', #1341, #2836 ) ; +#2764 = DIRECTION ( 'NONE', ( -0.8440137863433181400, -0.5363214786510189800, 0.0000000000000000000 ) ) ; +#2765 = CYLINDRICAL_SURFACE ( 'NONE', #2573, 15.00000000000000000 ) ; +#2766 = ADVANCED_FACE ( 'NONE', ( #1958 ), #1949, .T. ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000002800, -22.49999999999968700, 0.0000000000000000000 ) ) ; +#2768 = AXIS2_PLACEMENT_3D ( 'NONE', #1157, #1545, #128 ) ; +#2769 = CARTESIAN_POINT ( 'NONE', ( -21.68064936598937800, -15.59822844292761000, 40.46057594772484100 ) ) ; +#2770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2772 = EDGE_LOOP ( 'NONE', ( #858, #1730, #1731, #1784 ) ) ; +#2773 = AXIS2_PLACEMENT_3D ( 'NONE', #543, #120, #2274 ) ; +#2774 = EDGE_CURVE ( 'NONE', #2672, #1927, #1921, .T. ) ; +#2775 = ORIENTED_EDGE ( 'NONE', *, *, #1929, .F. ) ; +#2776 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -40.00000000000000000, 17.27199999999999800 ) ) ; +#2777 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#2778 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.491481338843133400E-015, 0.0000000000000000000 ) ) ; +#2779 = ORIENTED_EDGE ( 'NONE', *, *, #109, .F. ) ; +#2780 = ORIENTED_EDGE ( 'NONE', *, *, #339, .F. ) ; +#2781 = CARTESIAN_POINT ( 'NONE', ( -35.07059174458554200, -20.84117686050962000, 2.004706116305717600 ) ) ; +#2782 = ADVANCED_FACE ( 'NONE', ( #1909 ), #1912, .T. ) ; +#2783 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 3.282765312563869300E-016, 37.43962887309924500 ) ) ; +#2784 = ORIENTED_EDGE ( 'NONE', *, *, #1983, .T. ) ; +#2785 = EDGE_CURVE ( 'NONE', #1508, #1098, #1903, .T. ) ; +#2786 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2787 = EDGE_LOOP ( 'NONE', ( #127, #1825, #1832, #2362 ) ) ; +#2788 = EDGE_LOOP ( 'NONE', ( #1906, #825, #1434, #320 ) ) ; +#2789 = FACE_OUTER_BOUND ( 'NONE', #380, .T. ) ; +#2790 = ORIENTED_EDGE ( 'NONE', *, *, #1653, .T. ) ; +#2791 = ORIENTED_EDGE ( 'NONE', *, *, #32, .F. ) ; +#2792 = FACE_OUTER_BOUND ( 'NONE', #286, .T. ) ; +#2793 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #945, #2534 ) ; +#2794 = CARTESIAN_POINT ( 'NONE', ( 4.698999999999999800, 5.754615309193413700E-016, 17.37200000000000000 ) ) ; +#2795 = EDGE_CURVE ( 'NONE', #1087, #204, #1915, .T. ) ; +#2796 = EDGE_CURVE ( 'NONE', #436, #213, #1884, .T. ) ; +#2797 = CIRCLE ( 'NONE', #2587, 7.931999999999999500 ) ; +#2798 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000005000, -24.69899999999979200, 17.37200000000000000 ) ) ; +#2799 = AXIS2_PLACEMENT_3D ( 'NONE', #2019, #740, #2287 ) ; +#2800 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995600, -54.79019945774904700, 3.000000000000018200 ) ) ; +#2801 = VECTOR ( 'NONE', #925, 1000.000000000000000 ) ; +#2802 = ADVANCED_FACE ( 'NONE', ( #1886 ), #195, .T. ) ; +#2803 = CIRCLE ( 'NONE', #2594, 15.00000000000000400 ) ; +#2804 = AXIS2_PLACEMENT_3D ( 'NONE', #1627, #1633, #426 ) ; +#2805 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.850371707708594400E-015, 0.0000000000000000000 ) ) ; +#2806 = CIRCLE ( 'NONE', #2633, 10.00000000000000400 ) ; +#2807 = CARTESIAN_POINT ( 'NONE', ( 21.72519634692796900, -15.62348312679598900, 37.21134763931962700 ) ) ; +#2808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2809 = CARTESIAN_POINT ( 'NONE', ( 34.79019945774906800, -22.49999999999963800, 0.0000000000000000000 ) ) ; +#2810 = VERTEX_POINT ( 'NONE', #556 ) ; +#2811 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 0.0000000000000000000 ) ) ; +#2812 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2813 = AXIS2_PLACEMENT_3D ( 'NONE', #1232, #1033, #2375 ) ; +#2814 = AXIS2_PLACEMENT_3D ( 'NONE', #1880, #657, #2249 ) ; +#2815 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2816 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2817 = ADVANCED_FACE ( 'NONE', ( #1879 ), #168, .T. ) ; +#2818 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ; +#2819 = CARTESIAN_POINT ( 'NONE', ( -21.51811602493687300, -24.45244550588880400, 37.23454346966066500 ) ) ; +#2820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2821 = ORIENTED_EDGE ( 'NONE', *, *, #2485, .T. ) ; +#2822 = AXIS2_PLACEMENT_3D ( 'NONE', #1370, #138, #1560 ) ; +#2823 = DIRECTION ( 'NONE', ( 0.8440137863433208000, 0.5363214786510154300, 2.928261058435662700E-016 ) ) ; +#2824 = EDGE_LOOP ( 'NONE', ( #2625, #2630 ) ) ; +#2825 = CARTESIAN_POINT ( 'NONE', ( -19.08353450425797200, -15.39123747681509600, 37.50000000000000000 ) ) ; +#2826 = CARTESIAN_POINT ( 'NONE', ( -19.63481492320221700, -27.37124851480131900, 39.96846984963000400 ) ) ; +#2827 = ORIENTED_EDGE ( 'NONE', *, *, #700, .F. ) ; +#2828 = ORIENTED_EDGE ( 'NONE', *, *, #874, .T. ) ; +#2829 = CARTESIAN_POINT ( 'NONE', ( -35.00000000000000000, -20.00000000000006800, 30.00000000000000000 ) ) ; +#2830 = LINE ( 'NONE', #2250, #2801 ) ; +#2831 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2832 = EDGE_LOOP ( 'NONE', ( #1968, #900, #656, #421 ) ) ; +#2833 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 37.50000000000000000 ) ) ; +#2834 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .F. ) ; +#2835 = VERTEX_POINT ( 'NONE', #2295 ) ; +#2836 = VECTOR ( 'NONE', #2526, 1000.000000000000000 ) ; +#2837 = AXIS2_PLACEMENT_3D ( 'NONE', #2882, #1429, #202 ) ; +#2838 = TOROIDAL_SURFACE ( 'NONE', #2616, 60.00000000000000700, 10.00000000000000000 ) ; +#2839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2840 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2841 = VECTOR ( 'NONE', #284, 1000.000000000000000 ) ; +#2842 = AXIS2_PLACEMENT_3D ( 'NONE', #1853, #620, #2115 ) ; +#2843 = CARTESIAN_POINT ( 'NONE', ( -21.15740456690528100, -24.56400454338004400, 37.28082034425731500 ) ) ; +#2844 = CARTESIAN_POINT ( 'NONE', ( 4.452445505888731800, -41.51811602493685200, 37.23454346966065700 ) ) ; +#2845 = CARTESIAN_POINT ( 'NONE', ( -3.966020782027261500, -42.52017462818112400, 37.17038346254926800 ) ) ; +#2846 = LINE ( 'NONE', #1510, #2841 ) ; +#2847 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999998200, -24.95300000000007000, 0.0000000000000000000 ) ) ; +#2848 = AXIS2_PLACEMENT_3D ( 'NONE', #1835, #2094, #806 ) ; +#2849 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000000000, -20.00000000000007100, 17.37200000000000000 ) ) ; +#2850 = TOROIDAL_SURFACE ( 'NONE', #2548, 4.799000000000000400, 0.1000000000000000100 ) ; +#2851 = CARTESIAN_POINT ( 'NONE', ( 4.220068931716626000, -42.68160739325503500, 30.00000000000000000 ) ) ; +#2852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2853 = FACE_OUTER_BOUND ( 'NONE', #1871, .T. ) ; +#2854 = AXIS2_PLACEMENT_3D ( 'NONE', #1224, #2869, #1420 ) ; +#2855 = CARTESIAN_POINT ( 'NONE', ( -22.52017462818111000, -23.96602078202733900, 40.55200177161795200 ) ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( -28.04482217976519100, -32.66020679514990400, 40.00000000000000000 ) ) ; +#2857 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2858 = VERTEX_POINT ( 'NONE', #2097 ) ; +#2859 = CARTESIAN_POINT ( 'NONE', ( 19.53516298299121300, -27.34707931044451700, 39.97459144026987600 ) ) ; +#2860 = ORIENTED_EDGE ( 'NONE', *, *, #1311, .F. ) ; +#2861 = EDGE_CURVE ( 'NONE', #2604, #2455, #1849, .T. ) ; +#2862 = CARTESIAN_POINT ( 'NONE', ( 19.63395680537247800, -27.37103394493036400, 39.96852174381972800 ) ) ; +#2863 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2864 = AXIS2_PLACEMENT_3D ( 'NONE', #1591, #1823, #588 ) ; +#2865 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2866 = VECTOR ( 'NONE', #905, 1000.000000000000000 ) ; +#2867 = AXIS2_PLACEMENT_3D ( 'NONE', #373, #1191, #2839 ) ; +#2868 = EDGE_LOOP ( 'NONE', ( #1794, #1836, #2425, #2158, #2307, #2156 ) ) ; +#2869 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2870 = ORIENTED_EDGE ( 'NONE', *, *, #2418, .T. ) ; +#2871 = EDGE_CURVE ( 'NONE', #2275, #1497, #1876, .T. ) ; +#2872 = FACE_OUTER_BOUND ( 'NONE', #1901, .T. ) ; +#2873 = CARTESIAN_POINT ( 'NONE', ( 20.99288557151369300, -24.60373432548122000, 40.33561236390520600 ) ) ; +#2874 = FACE_BOUND ( 'NONE', #786, .T. ) ; +#2875 = CARTESIAN_POINT ( 'NONE', ( 20.51850427845608100, -15.32042489850783600, 40.25394205035955500 ) ) ; +#2876 = VERTEX_POINT ( 'NONE', #2244 ) ; +#2877 = TOROIDAL_SURFACE ( 'NONE', #2622, 7.199000000000001600, 2.500000000000000000 ) ; +#2878 = CIRCLE ( 'NONE', #2644, 4.799000000000000400 ) ; +#2879 = AXIS2_PLACEMENT_3D ( 'NONE', #1282, #2173, #2448 ) ; +#2880 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #142, #131 ) ; +#2881 = LINE ( 'NONE', #1961, #2866 ) ; +#2882 = CARTESIAN_POINT ( 'NONE', ( 7.060753650650952700, -38.59594911601463700, 37.50000000000000000 ) ) ; +#2883 = CARTESIAN_POINT ( 'NONE', ( 22.26557984747201500, -24.12780089919590100, 37.17038346256048700 ) ) ; +#2884 = CIRCLE ( 'NONE', #2686, 0.09999999999999939500 ) ; +#2885 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, -50.00000000000000000, 0.0000000000000000000 ) ) ; +#2886 = AXIS2_PLACEMENT_3D ( 'NONE', #672, #1276, #1923 ) ; +#2887 = CIRCLE ( 'NONE', #2638, 4.698999999999998100 ) ; +#2888 = CARTESIAN_POINT ( 'NONE', ( 7.060753650650973200, -1.404050883985263900, 40.00000000000000000 ) ) ; +#2889 = ORIENTED_EDGE ( 'NONE', *, *, #2696, .F. ) ; +#2890 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001400, -15.30100000000006900, 37.43962887309924500 ) ) ; +#2891 = CARTESIAN_POINT ( 'NONE', ( 4.608762523184964300, -39.08353450425791900, 39.99999999999999300 ) ) ; +#2892 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2893 = AXIS2_PLACEMENT_3D ( 'NONE', #1710, #1382, #158 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Barrel_Shaft.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Barrel_Shaft.step new file mode 100644 index 0000000..25490a9 --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Barrel_Shaft.step @@ -0,0 +1,480 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Barrel_Shaft.STEP', + '2013-11-14T05:07:46', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = DIRECTION ( 'NONE', ( 0.4999999999999999400, -0.8660254037844387100, 0.0000000000000000000 ) ) ; +#2 = AXIS2_PLACEMENT_3D ( 'NONE', #21, #189, #320 ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000000, 4.592425496802574000E-016, 53.75000000000000000 ) ) ; +#4 = AXIS2_PLACEMENT_3D ( 'NONE', #75, #148, #257 ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 51.75000000000000000 ) ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ; +#7 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #1, #113 ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000000000, 1.469576158976823600E-016, 51.75000000000000000 ) ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ; +#10 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 53.75000000000000000 ) ) ; +#15 = AXIS2_PLACEMENT_3D ( 'NONE', #26, #163, #40 ) ; +#16 = DIRECTION ( 'NONE', ( 0.8660254037844387100, 0.4999999999999999400, 0.0000000000000000000 ) ) ; +#17 = AXIS2_PLACEMENT_3D ( 'NONE', #6, #389, #248 ) ; +#18 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 53.75000000000000000 ) ) ; +#20 = PLANE ( 'NONE', #63 ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ; +#22 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#24 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #202, #53 ) ; +#25 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#26 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ; +#27 = MECHANICAL_CONTEXT ( 'NONE', #453, 'mechanical' ) ; +#28 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#29 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 51.75000000000000000 ) ) ; +#31 = AXIS2_PLACEMENT_3D ( 'NONE', #12, #121, #38 ) ; +#32 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 51.75000000000000000 ) ) ; +#35 = DIRECTION ( 'NONE', ( -0.5000000000000001100, -0.8660254037844386000, 0.0000000000000000000 ) ) ; +#36 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #122, #28 ) ; +#37 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 53.75000000000000000 ) ) ; +#38 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#39 = PRODUCT ( 'Barrel_Shaft', 'Barrel_Shaft', '', ( #27 ) ) ; +#40 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#41 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#42 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #35, #195 ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 53.75000000000000000 ) ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 51.75000000000000000 ) ) ; +#45 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 51.75000000000000000 ) ) ; +#46 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728917900, 53.75000000000000000 ) ) ; +#47 = PLANE ( 'NONE', #68 ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ; +#49 = AXIS2_PLACEMENT_3D ( 'NONE', #51, #256, #69 ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000000000, 1.469576158976823600E-016, 46.75000000000000000 ) ) ; +#51 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#52 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #82, #446 ) ; +#53 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#54 = DIRECTION ( 'NONE', ( 0.5000000000000003300, 0.8660254037844386000, 0.0000000000000000000 ) ) ; +#55 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#56 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000000, 4.592425496802574000E-016, 53.75000000000000000 ) ) ; +#57 = DIRECTION ( 'NONE', ( -0.8660254037844384900, 0.5000000000000002200, 0.0000000000000000000 ) ) ; +#58 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 51.75000000000000000 ) ) ; +#60 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 51.75000000000000000 ) ) ; +#61 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#62 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63 = AXIS2_PLACEMENT_3D ( 'NONE', #33, #327, #77 ) ; +#64 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #116, 'distance_accuracy_value', 'NONE'); +#65 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 51.75000000000000000 ) ) ; +#66 = DIRECTION ( 'NONE', ( -0.8660254037844384900, 0.5000000000000002200, 0.0000000000000000000 ) ) ; +#67 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#68 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #32, #29 ) ; +#69 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70 = PLANE ( 'NONE', #17 ) ; +#71 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#72 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#73 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#74 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ; +#76 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#77 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#78 = DATE_TIME_ROLE ( 'classification_date' ) ; +#79 = DIRECTION ( 'NONE', ( -0.5000000000000001100, 0.8660254037844387100, 0.0000000000000000000 ) ) ; +#80 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 51.75000000000000000 ) ) ; +#81 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude2', #451 ) ; +#82 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#83 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#84 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#85 = PLANE ( 'NONE', #24 ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 51.75000000000000000 ) ) ; +#87 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#88 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#89 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#90 = AXIS2_PLACEMENT_3D ( 'NONE', #109, #62, #61 ) ; +#91 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 51.75000000000000000 ) ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 51.75000000000000000 ) ) ; +#93 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#94 = PLANE ( 'NONE', #42 ) ; +#95 = APPROVAL_ROLE ( '' ) ; +#96 = DESIGN_CONTEXT ( 'detailed design', #41, 'design' ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000000000, 1.469576158976823600E-016, 46.75000000000000000 ) ) ; +#98 = PLANE ( 'NONE', #413 ) ; +#99 = AXIS2_PLACEMENT_3D ( 'NONE', #179, #89, #88 ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#101 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#102 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel_Shaft', ( #81, #315 ), #336 ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 51.75000000000000000 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 51.75000000000000000 ) ) ; +#105 = PLANE ( 'NONE', #99 ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 53.75000000000000000 ) ) ; +#107 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#108 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 51.75000000000000000 ) ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#110 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#112 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#113 = DIRECTION ( 'NONE', ( 0.8660254037844387100, 0.4999999999999999400, 0.0000000000000000000 ) ) ; +#114 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000000, 4.592425496802574000E-016, 0.0000000000000000000 ) ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 51.75000000000000000 ) ) ; +#116 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#117 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#118 = APPROVAL_DATE_TIME ( #119, #283 ) ; +#119 = DATE_AND_TIME ( #120, #123 ) ; +#120 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#123 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #125 ) ; +#124 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 51.75000000000000000 ) ) ; +#125 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#126 = APPROVAL_PERSON_ORGANIZATION ( #127, #283, #95 ) ; +#127 = PERSON_AND_ORGANIZATION ( #83, #166 ) ; +#128 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#129 = DATE_AND_TIME ( #131, #133 ) ; +#130 = DIRECTION ( 'NONE', ( 0.8660254037844386000, -0.5000000000000001100, 0.0000000000000000000 ) ) ; +#131 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 51.75000000000000000 ) ) ; +#133 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #134 ) ; +#134 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#135 = PERSON_AND_ORGANIZATION ( #83, #166 ) ; +#136 = PERSON_AND_ORGANIZATION ( #83, #166 ) ; +#137 = PERSON_AND_ORGANIZATION ( #83, #166 ) ; +#138 = APPROVAL_DATE_TIME ( #139, #300 ) ; +#139 = DATE_AND_TIME ( #140, #141 ) ; +#140 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#141 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #142 ) ; +#142 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#143 = APPROVAL_PERSON_ORGANIZATION ( #145, #300, #454 ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 51.75000000000000000 ) ) ; +#145 = PERSON_AND_ORGANIZATION ( #83, #166 ) ; +#146 = DATE_AND_TIME ( #147, #149 ) ; +#147 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#148 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#149 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #152 ) ; +#150 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 53.75000000000000000 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 51.75000000000000000 ) ) ; +#152 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#153 = PERSON_AND_ORGANIZATION ( #83, #166 ) ; +#154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#155 = APPROVAL_DATE_TIME ( #156, #311 ) ; +#156 = DATE_AND_TIME ( #157, #158 ) ; +#157 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#158 = LOCAL_TIME ( 15, 7, 46.00000000000000000, #159 ) ; +#159 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#160 = APPROVAL_PERSON_ORGANIZATION ( #161, #311, #278 ) ; +#161 = PERSON_AND_ORGANIZATION ( #83, #166 ) ; +#162 = PERSON_AND_ORGANIZATION ( #83, #166 ) ; +#163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#164 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#165 = FACE_OUTER_BOUND ( 'NONE', #420, .T. ) ; +#166 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#167 = VECTOR ( 'NONE', #128, 1000.000000000000000 ) ; +#168 = LINE ( 'NONE', #108, #167 ) ; +#169 = VECTOR ( 'NONE', #93, 1000.000000000000000 ) ; +#170 = DIRECTION ( 'NONE', ( -0.8660254037844386000, -0.5000000000000000000, 0.0000000000000000000 ) ) ; +#171 = SHAPE_DEFINITION_REPRESENTATION ( #409, #102 ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 53.75000000000000000 ) ) ; +#173 = LINE ( 'NONE', #325, #169 ) ; +#174 = VECTOR ( 'NONE', #295, 999.9999999999998900 ) ; +#175 = LINE ( 'NONE', #30, #176 ) ; +#176 = VECTOR ( 'NONE', #58, 1000.000000000000000 ) ; +#177 = VECTOR ( 'NONE', #170, 1000.000000000000200 ) ; +#178 = LINE ( 'NONE', #124, #174 ) ; +#179 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 51.75000000000000000 ) ) ; +#180 = VECTOR ( 'NONE', #74, 1000.000000000000000 ) ; +#181 = PLANE ( 'NONE', #90 ) ; +#182 = AXIS2_PLACEMENT_3D ( 'NONE', #132, #111, #110 ) ; +#183 = LINE ( 'NONE', #233, #180 ) ; +#184 = CIRCLE ( 'NONE', #354, 1.200000000000000000 ) ; +#185 = LINE ( 'NONE', #14, #177 ) ; +#186 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ; +#187 = DIRECTION ( 'NONE', ( 0.8660254037844386000, -0.5000000000000001100, 0.0000000000000000000 ) ) ; +#188 = LINE ( 'NONE', #43, #191 ) ; +#189 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#190 = VECTOR ( 'NONE', #16, 999.9999999999998900 ) ; +#191 = VECTOR ( 'NONE', #57, 1000.000000000000200 ) ; +#192 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#193 = LINE ( 'NONE', #340, #190 ) ; +#194 = VECTOR ( 'NONE', #154, 1000.000000000000000 ) ; +#195 = DIRECTION ( 'NONE', ( 0.8660254037844386000, -0.5000000000000001100, 0.0000000000000000000 ) ) ; +#196 = CYLINDRICAL_SURFACE ( 'NONE', #373, 3.750000000000000000 ) ; +#197 = CIRCLE ( 'NONE', #396, 1.200000000000000000 ) ; +#198 = FACE_OUTER_BOUND ( 'NONE', #456, .T. ) ; +#199 = LINE ( 'NONE', #37, #186 ) ; +#200 = CYLINDRICAL_SURFACE ( 'NONE', #382, 1.200000000000000000 ) ; +#201 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 53.75000000000000000 ) ) ; +#202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#203 = FACE_OUTER_BOUND ( 'NONE', #394, .T. ) ; +#204 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#205 = VECTOR ( 'NONE', #66, 1000.000000000000200 ) ; +#206 = LINE ( 'NONE', #201, #194 ) ; +#207 = CYLINDRICAL_SURFACE ( 'NONE', #2, 3.750000000000000000 ) ; +#208 = CIRCLE ( 'NONE', #15, 3.750000000000000000 ) ; +#209 = LINE ( 'NONE', #144, #205 ) ; +#210 = CIRCLE ( 'NONE', #49, 3.750000000000000000 ) ; +#211 = CYLINDRICAL_SURFACE ( 'NONE', #4, 1.200000000000000000 ) ; +#212 = FACE_OUTER_BOUND ( 'NONE', #406, .T. ) ; +#213 = FACE_OUTER_BOUND ( 'NONE', #395, .T. ) ; +#214 = VECTOR ( 'NONE', #246, 1000.000000000000000 ) ; +#215 = FACE_OUTER_BOUND ( 'NONE', #362, .T. ) ; +#216 = LINE ( 'NONE', #48, #214 ) ; +#217 = FACE_OUTER_BOUND ( 'NONE', #275, .T. ) ; +#218 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, 1.213359325728918100, 51.75000000000000000 ) ) ; +#219 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #41 ) ; +#220 = LINE ( 'NONE', #80, #222 ) ; +#221 = FACE_BOUND ( 'NONE', #341, .T. ) ; +#222 = VECTOR ( 'NONE', #440, 1000.000000000000000 ) ; +#223 = FACE_OUTER_BOUND ( 'NONE', #268, .T. ) ; +#224 = EDGE_CURVE ( 'NONE', #442, #419, #260, .T. ) ; +#225 = FACE_BOUND ( 'NONE', #450, .T. ) ; +#226 = VECTOR ( 'NONE', #72, 1000.000000000000000 ) ; +#227 = FACE_OUTER_BOUND ( 'NONE', #448, .T. ) ; +#228 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000000000, 0.0000000000000000000, 51.75000000000000000 ) ) ; +#229 = VECTOR ( 'NONE', #286, 1000.000000000000200 ) ; +#230 = CIRCLE ( 'NONE', #31, 3.750000000000000000 ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ; +#232 = VECTOR ( 'NONE', #204, 1000.000000000000000 ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 53.75000000000000000 ) ) ; +#234 = LINE ( 'NONE', #97, #232 ) ; +#235 = LINE ( 'NONE', #56, #226 ) ; +#236 = VECTOR ( 'NONE', #264, 1000.000000000000000 ) ; +#237 = LINE ( 'NONE', #104, #229 ) ; +#238 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#239 = FACE_OUTER_BOUND ( 'NONE', #355, .T. ) ; +#240 = LINE ( 'NONE', #5, #236 ) ; +#241 = LINE ( 'NONE', #115, #242 ) ; +#242 = VECTOR ( 'NONE', #23, 1000.000000000000000 ) ; +#243 = CIRCLE ( 'NONE', #36, 3.750000000000000000 ) ; +#244 = FACE_OUTER_BOUND ( 'NONE', #457, .T. ) ; +#245 = CIRCLE ( 'NONE', #52, 1.200000000000000000 ) ; +#246 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#247 = VECTOR ( 'NONE', #73, 1000.000000000000000 ) ; +#248 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#249 = FACE_OUTER_BOUND ( 'NONE', #417, .T. ) ; +#250 = FACE_OUTER_BOUND ( 'NONE', #266, .T. ) ; +#251 = VECTOR ( 'NONE', #187, 1000.000000000000000 ) ; +#252 = LINE ( 'NONE', #60, #247 ) ; +#253 = PLANE ( 'NONE', #329 ) ; +#254 = FACE_OUTER_BOUND ( 'NONE', #405, .T. ) ; +#255 = VECTOR ( 'NONE', #18, 1000.000000000000000 ) ; +#256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#257 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#258 = CIRCLE ( 'NONE', #182, 1.200000000000000000 ) ; +#259 = VECTOR ( 'NONE', #238, 1000.000000000000000 ) ; +#260 = LINE ( 'NONE', #463, #259 ) ; +#261 = LINE ( 'NONE', #91, #251 ) ; +#262 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ; +#263 = ORIENTED_EDGE ( 'NONE', *, *, #415, .F. ) ; +#264 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#265 = ORIENTED_EDGE ( 'NONE', *, *, #365, .F. ) ; +#266 = EDGE_LOOP ( 'NONE', ( #267, #265 ) ) ; +#267 = ORIENTED_EDGE ( 'NONE', *, *, #391, .F. ) ; +#268 = EDGE_LOOP ( 'NONE', ( #282, #284, #289, #291 ) ) ; +#269 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ; +#270 = ORIENTED_EDGE ( 'NONE', *, *, #359, .T. ) ; +#271 = ORIENTED_EDGE ( 'NONE', *, *, #393, .T. ) ; +#272 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #39 ) ) ; +#273 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#274 = CC_DESIGN_SECURITY_CLASSIFICATION ( #288, ( #301 ) ) ; +#275 = EDGE_LOOP ( 'NONE', ( #269, #270 ) ) ; +#276 = DIRECTION ( 'NONE', ( -0.8660254037844384900, 0.5000000000000002200, 0.0000000000000000000 ) ) ; +#277 = ORIENTED_EDGE ( 'NONE', *, *, #423, .F. ) ; +#278 = APPROVAL_ROLE ( '' ) ; +#279 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ; +#280 = ORIENTED_EDGE ( 'NONE', *, *, #425, .T. ) ; +#281 = CC_DESIGN_APPROVAL ( #283, ( #288 ) ) ; +#282 = ORIENTED_EDGE ( 'NONE', *, *, #400, .T. ) ; +#283 = APPROVAL ( #433, 'UNSPECIFIED' ) ; +#284 = ORIENTED_EDGE ( 'NONE', *, *, #425, .F. ) ; +#285 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #129, #78, ( #288 ) ) ; +#286 = DIRECTION ( 'NONE', ( -0.8660254037844386000, -0.5000000000000000000, 0.0000000000000000000 ) ) ; +#287 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #135, #328, ( #288 ) ) ; +#288 = SECURITY_CLASSIFICATION ( '', '', #67 ) ; +#289 = ORIENTED_EDGE ( 'NONE', *, *, #418, .F. ) ; +#290 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #136, #11, ( #301 ) ) ; +#291 = ORIENTED_EDGE ( 'NONE', *, *, #314, .T. ) ; +#292 = ORIENTED_EDGE ( 'NONE', *, *, #402, .T. ) ; +#293 = ORIENTED_EDGE ( 'NONE', *, *, #314, .F. ) ; +#294 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #137, #101, ( #301 ) ) ; +#295 = DIRECTION ( 'NONE', ( 0.8660254037844387100, 0.4999999999999999400, 0.0000000000000000000 ) ) ; +#296 = ORIENTED_EDGE ( 'NONE', *, *, #333, .F. ) ; +#297 = CC_DESIGN_APPROVAL ( #300, ( #301 ) ) ; +#298 = ORIENTED_EDGE ( 'NONE', *, *, #342, .T. ) ; +#299 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ; +#300 = APPROVAL ( #84, 'UNSPECIFIED' ) ; +#301 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #39, .NOT_KNOWN. ) ; +#302 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #146, #376, ( #312 ) ) ; +#303 = ORIENTED_EDGE ( 'NONE', *, *, #342, .F. ) ; +#304 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #153, #71, ( #312 ) ) ; +#305 = ORIENTED_EDGE ( 'NONE', *, *, #345, .F. ) ; +#306 = CC_DESIGN_APPROVAL ( #311, ( #312 ) ) ; +#307 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ; +#308 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ; +#309 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ; +#310 = ORIENTED_EDGE ( 'NONE', *, *, #360, .F. ) ; +#311 = APPROVAL ( #55, 'UNSPECIFIED' ) ; +#312 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #301, #96 ) ; +#313 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #162, #164, ( #39 ) ) ; +#314 = EDGE_CURVE ( 'NONE', #411, #424, #455, .T. ) ; +#315 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #10, #117 ) ; +#316 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ; +#317 = ORIENTED_EDGE ( 'NONE', *, *, #415, .T. ) ; +#318 = ORIENTED_EDGE ( 'NONE', *, *, #378, .F. ) ; +#319 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ; +#320 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#321 = ORIENTED_EDGE ( 'NONE', *, *, #386, .F. ) ; +#322 = VERTEX_POINT ( 'NONE', #19 ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 53.75000000000000000 ) ) ; +#324 = ORIENTED_EDGE ( 'NONE', *, *, #224, .F. ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( 2.101599999999999500, -1.213359325728917500, 51.75000000000000000 ) ) ; +#326 = EDGE_CURVE ( 'NONE', #357, #419, #258, .T. ) ; +#327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#328 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#329 = AXIS2_PLACEMENT_3D ( 'NONE', #330, #79, #436 ) ; +#330 = CARTESIAN_POINT ( 'NONE', ( 7.724940478959219100E-016, 2.426718651457835800, 51.75000000000000000 ) ) ; +#331 = ORIENTED_EDGE ( 'NONE', *, *, #423, .T. ) ; +#332 = ORIENTED_EDGE ( 'NONE', *, *, #398, .F. ) ; +#333 = EDGE_CURVE ( 'NONE', #422, #411, #261, .T. ) ; +#334 = ORIENTED_EDGE ( 'NONE', *, *, #326, .F. ) ; +#335 = ADVANCED_FACE ( 'NONE', ( #254 ), #105, .F. ) ; +#336 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #64 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #116, #25, #273 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#337 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ; +#338 = ADVANCED_FACE ( 'NONE', ( #250 ), #181, .F. ) ; +#339 = ORIENTED_EDGE ( 'NONE', *, *, #386, .T. ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 53.75000000000000000 ) ) ; +#341 = EDGE_LOOP ( 'NONE', ( #388, #392, #385, #390, #262, #263 ) ) ; +#342 = EDGE_CURVE ( 'NONE', #422, #421, #252, .T. ) ; +#343 = ADVANCED_FACE ( 'NONE', ( #249 ), #47, .F. ) ; +#344 = ADVANCED_FACE ( 'NONE', ( #244 ), #20, .T. ) ; +#345 = EDGE_CURVE ( 'NONE', #383, #422, #241, .T. ) ; +#346 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ; +#347 = ADVANCED_FACE ( 'NONE', ( #239 ), #94, .F. ) ; +#348 = ORIENTED_EDGE ( 'NONE', *, *, #360, .T. ) ; +#349 = EDGE_CURVE ( 'NONE', #452, #442, #245, .T. ) ; +#350 = ORIENTED_EDGE ( 'NONE', *, *, #345, .T. ) ; +#351 = ORIENTED_EDGE ( 'NONE', *, *, #333, .T. ) ; +#352 = EDGE_CURVE ( 'NONE', #383, #441, #240, .T. ) ; +#353 = ORIENTED_EDGE ( 'NONE', *, *, #418, .T. ) ; +#354 = AXIS2_PLACEMENT_3D ( 'NONE', #403, #87, #462 ) ; +#355 = EDGE_LOOP ( 'NONE', ( #292, #293, #296, #298 ) ) ; +#356 = ORIENTED_EDGE ( 'NONE', *, *, #358, .F. ) ; +#357 = VERTEX_POINT ( 'NONE', #8 ) ; +#358 = EDGE_CURVE ( 'NONE', #452, #357, #234, .T. ) ; +#359 = EDGE_CURVE ( 'NONE', #435, #431, #243, .T. ) ; +#360 = EDGE_CURVE ( 'NONE', #449, #383, #237, .T. ) ; +#361 = EDGE_CURVE ( 'NONE', #435, #437, #235, .T. ) ; +#362 = EDGE_LOOP ( 'NONE', ( #317, #319, #321, #331 ) ) ; +#363 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ; +#364 = ORIENTED_EDGE ( 'NONE', *, *, #224, .T. ) ; +#365 = EDGE_CURVE ( 'NONE', #437, #404, #230, .T. ) ; +#366 = ORIENTED_EDGE ( 'NONE', *, *, #398, .T. ) ; +#367 = ADVANCED_FACE ( 'NONE', ( #225, #227 ), #85, .T. ) ; +#368 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #453 ) ; +#369 = EDGE_CURVE ( 'NONE', #449, #322, #220, .T. ) ; +#370 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ; +#371 = ADVANCED_FACE ( 'NONE', ( #221, #217 ), #70, .T. ) ; +#372 = ORIENTED_EDGE ( 'NONE', *, *, #349, .T. ) ; +#373 = AXIS2_PLACEMENT_3D ( 'NONE', #323, #192, #76 ) ; +#374 = ADVANCED_FACE ( 'NONE', ( #223 ), #429, .F. ) ; +#375 = VERTEX_POINT ( 'NONE', #65 ) ; +#376 = DATE_TIME_ROLE ( 'creation_date' ) ; +#377 = ADVANCED_FACE ( 'NONE', ( #212 ), #211, .F. ) ; +#378 = EDGE_CURVE ( 'NONE', #431, #404, #216, .T. ) ; +#379 = ADVANCED_FACE ( 'NONE', ( #213 ), #207, .T. ) ; +#380 = EDGE_CURVE ( 'NONE', #431, #435, #208, .T. ) ; +#381 = ADVANCED_FACE ( 'NONE', ( #215 ), #98, .F. ) ; +#382 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #112, #22 ) ; +#383 = VERTEX_POINT ( 'NONE', #428 ) ; +#384 = ADVANCED_FACE ( 'NONE', ( #203 ), #200, .F. ) ; +#385 = ORIENTED_EDGE ( 'NONE', *, *, #402, .F. ) ; +#386 = EDGE_CURVE ( 'NONE', #375, #449, #209, .T. ) ; +#387 = ADVANCED_FACE ( 'NONE', ( #198 ), #196, .T. ) ; +#388 = ORIENTED_EDGE ( 'NONE', *, *, #393, .F. ) ; +#389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#390 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ; +#391 = EDGE_CURVE ( 'NONE', #404, #437, #210, .T. ) ; +#392 = ORIENTED_EDGE ( 'NONE', *, *, #400, .F. ) ; +#393 = EDGE_CURVE ( 'NONE', #458, #408, #206, .T. ) ; +#394 = EDGE_LOOP ( 'NONE', ( #356, #363, #364, #366 ) ) ; +#395 = EDGE_LOOP ( 'NONE', ( #401, #426, #432, #412 ) ) ; +#396 = AXIS2_PLACEMENT_3D ( 'NONE', #86, #460, #107 ) ; +#397 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 53.75000000000000000 ) ) ; +#398 = EDGE_CURVE ( 'NONE', #419, #357, #197, .T. ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#400 = EDGE_CURVE ( 'NONE', #424, #458, #193, .T. ) ; +#401 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ; +#402 = EDGE_CURVE ( 'NONE', #421, #424, #199, .T. ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ; +#404 = VERTEX_POINT ( 'NONE', #399 ) ; +#405 = EDGE_LOOP ( 'NONE', ( #271, #277, #279, #280 ) ) ; +#406 = EDGE_LOOP ( 'NONE', ( #439, #434, #438, #324 ) ) ; +#407 = EDGE_CURVE ( 'NONE', #442, #452, #184, .T. ) ; +#408 = VERTEX_POINT ( 'NONE', #46 ) ; +#409 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #312 ) ; +#410 = EDGE_CURVE ( 'NONE', #441, #421, #183, .T. ) ; +#411 = VERTEX_POINT ( 'NONE', #59 ) ; +#412 = ORIENTED_EDGE ( 'NONE', *, *, #391, .T. ) ; +#413 = AXIS2_PLACEMENT_3D ( 'NONE', #218, #54, #276 ) ; +#414 = EDGE_CURVE ( 'NONE', #322, #441, #185, .T. ) ; +#415 = EDGE_CURVE ( 'NONE', #408, #322, #188, .T. ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( -2.574980159653073000E-016, -2.426718651457834900, 51.75000000000000000 ) ) ; +#417 = EDGE_LOOP ( 'NONE', ( #299, #303, #305, #307 ) ) ; +#418 = EDGE_CURVE ( 'NONE', #411, #444, #178, .T. ) ; +#419 = VERTEX_POINT ( 'NONE', #228 ) ; +#420 = EDGE_LOOP ( 'NONE', ( #308, #309, #310, #316 ) ) ; +#421 = VERTEX_POINT ( 'NONE', #397 ) ; +#422 = VERTEX_POINT ( 'NONE', #459 ) ; +#423 = EDGE_CURVE ( 'NONE', #375, #408, #168, .T. ) ; +#424 = VERTEX_POINT ( 'NONE', #106 ) ; +#425 = EDGE_CURVE ( 'NONE', #444, #458, #175, .T. ) ; +#426 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ; +#427 = EDGE_CURVE ( 'NONE', #444, #375, #173, .T. ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, 1.213359325728917900, 51.75000000000000000 ) ) ; +#429 = PLANE ( 'NONE', #7 ) ; +#430 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ; +#431 = VERTEX_POINT ( 'NONE', #231 ) ; +#432 = ORIENTED_EDGE ( 'NONE', *, *, #378, .T. ) ; +#433 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#434 = ORIENTED_EDGE ( 'NONE', *, *, #358, .T. ) ; +#435 = VERTEX_POINT ( 'NONE', #3 ) ; +#436 = DIRECTION ( 'NONE', ( -0.8660254037844386000, -0.5000000000000000000, 0.0000000000000000000 ) ) ; +#437 = VERTEX_POINT ( 'NONE', #114 ) ; +#438 = ORIENTED_EDGE ( 'NONE', *, *, #326, .T. ) ; +#439 = ORIENTED_EDGE ( 'NONE', *, *, #349, .F. ) ; +#440 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#441 = VERTEX_POINT ( 'NONE', #172 ) ; +#442 = VERTEX_POINT ( 'NONE', #430 ) ; +#443 = ORIENTED_EDGE ( 'NONE', *, *, #365, .T. ) ; +#444 = VERTEX_POINT ( 'NONE', #34 ) ; +#445 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ; +#446 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#447 = ORIENTED_EDGE ( 'NONE', *, *, #359, .F. ) ; +#448 = EDGE_LOOP ( 'NONE', ( #337, #339, #348, #350, #351, #353 ) ) ; +#449 = VERTEX_POINT ( 'NONE', #45 ) ; +#450 = EDGE_LOOP ( 'NONE', ( #332, #334 ) ) ; +#451 = CLOSED_SHELL ( 'NONE', ( #377, #387, #379, #371, #338, #335, #374, #347, #343, #461, #381, #367, #384, #344 ) ) ; +#452 = VERTEX_POINT ( 'NONE', #50 ) ; +#453 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#454 = APPROVAL_ROLE ( '' ) ; +#455 = LINE ( 'NONE', #416, #255 ) ; +#456 = EDGE_LOOP ( 'NONE', ( #447, #445, #443, #318 ) ) ; +#457 = EDGE_LOOP ( 'NONE', ( #370, #372 ) ) ; +#458 = VERTEX_POINT ( 'NONE', #150 ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( -2.101599999999999500, -1.213359325728917700, 51.75000000000000000 ) ) ; +#460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#461 = ADVANCED_FACE ( 'NONE', ( #165 ), #253, .F. ) ; +#462 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#463 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000000000, 0.0000000000000000000, 46.75000000000000000 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Barrel_Shaft_Cap.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Barrel_Shaft_Cap.step new file mode 100644 index 0000000..58a9fc0 --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Barrel_Shaft_Cap.step @@ -0,0 +1,368 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Barrel_Shaft_Cap.STEP', + '2013-11-14T05:07:31', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #123, #233, ( #32 ) ) ; +#2 = AXIS2_PLACEMENT_3D ( 'NONE', #42, #212, #75 ) ; +#3 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#4 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#5 = AXIS2_PLACEMENT_3D ( 'NONE', #258, #117, #24 ) ; +#6 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#7 = CC_DESIGN_APPROVAL ( #25, ( #32 ) ) ; +#8 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ; +#9 = VERTEX_POINT ( 'NONE', #243 ) ; +#10 = APPROVAL_PERSON_ORGANIZATION ( #188, #345, #326 ) ; +#11 = ORIENTED_EDGE ( 'NONE', *, *, #308, .T. ) ; +#12 = VERTEX_POINT ( 'NONE', #217 ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15 = LINE ( 'NONE', #19, #240 ) ; +#16 = LINE ( 'NONE', #66, #269 ) ; +#17 = AXIS2_PLACEMENT_3D ( 'NONE', #210, #283, #238 ) ; +#18 = AXIS2_PLACEMENT_3D ( 'NONE', #250, #107, #189 ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000005300, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#20 = ORIENTED_EDGE ( 'NONE', *, *, #300, .F. ) ; +#21 = PLANE ( 'NONE', #267 ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000011500, 1.469576158976838300E-016, 3.399999999999995900 ) ) ; +#23 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#25 = APPROVAL ( #37, 'UNSPECIFIED' ) ; +#26 = CYLINDRICAL_SURFACE ( 'NONE', #271, 5.000000000000000900 ) ; +#27 = CIRCLE ( 'NONE', #49, 1.200000000000011700 ) ; +#28 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#29 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #347, #68, ( #32 ) ) ; +#30 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#31 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#32 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #348, #171 ) ; +#33 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#34 = ORIENTED_EDGE ( 'NONE', *, *, #321, .F. ) ; +#35 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #96 ) ; +#36 = CYLINDRICAL_SURFACE ( 'NONE', #222, 3.189999999999995100 ) ; +#37 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 4.094999999999998000, 0.0000000000000000000, 4.094999999999997100 ) ) ; +#39 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #33, 'distance_accuracy_value', 'NONE'); +#40 = CYLINDRICAL_SURFACE ( 'NONE', #274, 1.200000000000005300 ) ; +#41 = CIRCLE ( 'NONE', #106, 5.000000000000000900 ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( -4.094999999999998000, 5.014928642508409500E-016, 4.094999999999997100 ) ) ; +#43 = ORIENTED_EDGE ( 'NONE', *, *, #322, .T. ) ; +#44 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#45 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#46 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#47 = AXIS2_PLACEMENT_3D ( 'NONE', #201, #59, #224 ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ; +#49 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #319, #150 ) ; +#50 = ORIENTED_EDGE ( 'NONE', *, *, #322, .F. ) ; +#51 = PERSON_AND_ORGANIZATION ( #52, #211 ) ; +#52 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#53 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#54 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#55 = LINE ( 'NONE', #249, #307 ) ; +#56 = ORIENTED_EDGE ( 'NONE', *, *, #289, .T. ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#58 = EDGE_LOOP ( 'NONE', ( #213, #89 ) ) ; +#59 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#60 = EDGE_LOOP ( 'NONE', ( #121, #184, #247, #341 ) ) ; +#61 = EDGE_CURVE ( 'NONE', #346, #132, #234, .T. ) ; +#62 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#63 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#64 = EDGE_LOOP ( 'NONE', ( #20, #218, #231, #94 ) ) ; +#65 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#66 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000005300, 1.469576158976830500E-016, 5.000000000000000000 ) ) ; +#67 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#68 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#69 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70 = ORIENTED_EDGE ( 'NONE', *, *, #308, .F. ) ; +#71 = FACE_OUTER_BOUND ( 'NONE', #242, .T. ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#73 = VERTEX_POINT ( 'NONE', #197 ) ; +#74 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#75 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.224646799147353700E-016, 0.0000000000000000000 ) ) ; +#76 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #54, #62 ) ; +#77 = ORIENTED_EDGE ( 'NONE', *, *, #304, .F. ) ; +#78 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#79 = SHAPE_DEFINITION_REPRESENTATION ( #228, #126 ) ; +#80 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#81 = PERSON_AND_ORGANIZATION ( #52, #211 ) ; +#82 = ORIENTED_EDGE ( 'NONE', *, *, #311, .T. ) ; +#83 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #74 ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 6.123233995736767300E-016, 5.000000000000000000 ) ) ; +#85 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #39 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #33, #205, #67 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#86 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #110 ) ; +#87 = ORIENTED_EDGE ( 'NONE', *, *, #315, .T. ) ; +#88 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#89 = ORIENTED_EDGE ( 'NONE', *, *, #161, .F. ) ; +#90 = FACE_BOUND ( 'NONE', #195, .T. ) ; +#91 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#92 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( 3.189999999999995100, 0.0000000000000000000, 3.399999999999995900 ) ) ; +#94 = ORIENTED_EDGE ( 'NONE', *, *, #321, .T. ) ; +#95 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#96 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#97 = CYLINDRICAL_SURFACE ( 'NONE', #17, 3.189999999999995100 ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( -1.200000000000005300, 1.469576158976830500E-016, 0.0000000000000000000 ) ) ; +#100 = PRODUCT ( 'Barrel_Shaft_Cap', 'Barrel_Shaft_Cap', '', ( #330 ) ) ; +#101 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#102 = AXIS2_PLACEMENT_3D ( 'NONE', #72, #235, #88 ) ; +#103 = FACE_OUTER_BOUND ( 'NONE', #64, .T. ) ; +#104 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #28, #203 ) ; +#105 = MANIFOLD_SOLID_BREP ( 'Fillet1', #158 ) ; +#106 = AXIS2_PLACEMENT_3D ( 'NONE', #255, #111, #131 ) ; +#107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#108 = ORIENTED_EDGE ( 'NONE', *, *, #287, .T. ) ; +#109 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #172 ) ; +#110 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#112 = CIRCLE ( 'NONE', #282, 5.000000000000000900 ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#114 = AXIS2_PLACEMENT_3D ( 'NONE', #38, #208, #69 ) ; +#115 = ORIENTED_EDGE ( 'NONE', *, *, #285, .F. ) ; +#116 = APPROVAL_DATE_TIME ( #181, #345 ) ; +#117 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ; +#119 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#120 = VECTOR ( 'NONE', #31, 1000.000000000000000 ) ; +#121 = ORIENTED_EDGE ( 'NONE', *, *, #297, .F. ) ; +#122 = EDGE_LOOP ( 'NONE', ( #207, #264, #11, #87 ) ) ; +#123 = DATE_AND_TIME ( #252, #83 ) ; +#124 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#125 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#126 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel_Shaft_Cap', ( #105, #165 ), #85 ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( -3.189999999999995100, 3.906623289280050800E-016, 5.000000000000000000 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.399999999999995900 ) ) ; +#129 = ORIENTED_EDGE ( 'NONE', *, *, #161, .T. ) ; +#130 = VECTOR ( 'NONE', #140, 1000.000000000000000 ) ; +#131 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#132 = VERTEX_POINT ( 'NONE', #173 ) ; +#133 = APPROVAL_DATE_TIME ( #144, #25 ) ; +#134 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#135 = ORIENTED_EDGE ( 'NONE', *, *, #311, .F. ) ; +#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#137 = CIRCLE ( 'NONE', #114, 0.9050000000000030200 ) ; +#138 = APPROVAL_PERSON_ORGANIZATION ( #81, #25, #206 ) ; +#139 = ORIENTED_EDGE ( 'NONE', *, *, #289, .F. ) ; +#140 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#141 = LINE ( 'NONE', #301, #130 ) ; +#142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#143 = VERTEX_POINT ( 'NONE', #93 ) ; +#144 = DATE_AND_TIME ( #257, #196 ) ; +#145 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#148 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #202, #157, ( #100 ) ) ; +#149 = ORIENTED_EDGE ( 'NONE', *, *, #317, .T. ) ; +#150 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#151 = FACE_OUTER_BOUND ( 'NONE', #58, .T. ) ; +#152 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#154 = FACE_OUTER_BOUND ( 'NONE', #60, .T. ) ; +#155 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #136, #53 ) ; +#156 = APPROVAL_DATE_TIME ( #219, #329 ) ; +#157 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#158 = CLOSED_SHELL ( 'NONE', ( #296, #277, #293, #286, #292, #280, #288, #279, #299, #290 ) ) ; +#159 = LINE ( 'NONE', #127, #306 ) ; +#160 = CIRCLE ( 'NONE', #18, 1.200000000000005300 ) ; +#161 = EDGE_CURVE ( 'NONE', #251, #294, #112, .T. ) ; +#162 = EDGE_LOOP ( 'NONE', ( #177, #241, #56, #333 ) ) ; +#163 = APPROVAL_PERSON_ORGANIZATION ( #232, #329, #227 ) ; +#164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#165 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #272, #134 ) ; +#166 = FACE_OUTER_BOUND ( 'NONE', #244, .T. ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#168 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #263, #125 ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( -3.189999999999995100, 3.906623289280050800E-016, 3.399999999999995900 ) ) ; +#170 = VERTEX_POINT ( 'NONE', #223 ) ; +#171 = DESIGN_CONTEXT ( 'detailed design', #6, 'design' ) ; +#172 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000011700, 0.0000000000000000000, 3.399999999999995900 ) ) ; +#174 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#175 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#176 = CIRCLE ( 'NONE', #2, 0.9050000000000030200 ) ; +#177 = ORIENTED_EDGE ( 'NONE', *, *, #287, .F. ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#179 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#180 = EDGE_LOOP ( 'NONE', ( #254, #191, #129, #70 ) ) ; +#181 = DATE_AND_TIME ( #245, #338 ) ; +#182 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #6 ) ; +#183 = CIRCLE ( 'NONE', #5, 3.189999999999995100 ) ; +#184 = ORIENTED_EDGE ( 'NONE', *, *, #300, .T. ) ; +#185 = FACE_OUTER_BOUND ( 'NONE', #180, .T. ) ; +#186 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#187 = EDGE_LOOP ( 'NONE', ( #115, #50, #327, #236 ) ) ; +#188 = PERSON_AND_ORGANIZATION ( #52, #211 ) ; +#189 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ; +#191 = ORIENTED_EDGE ( 'NONE', *, *, #305, .T. ) ; +#192 = FACE_BOUND ( 'NONE', #256, .T. ) ; +#193 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.399999999999995900 ) ) ; +#195 = EDGE_LOOP ( 'NONE', ( #149, #273 ) ) ; +#196 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #3 ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 6.123233995736767300E-016, 4.094999999999997100 ) ) ; +#198 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#199 = ORIENTED_EDGE ( 'NONE', *, *, #310, .F. ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.399999999999995900 ) ) ; +#201 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ; +#202 = PERSON_AND_ORGANIZATION ( #52, #211 ) ; +#203 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#204 = DATE_TIME_ROLE ( 'classification_date' ) ; +#205 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#206 = APPROVAL_ROLE ( '' ) ; +#207 = ORIENTED_EDGE ( 'NONE', *, *, #305, .F. ) ; +#208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#209 = CIRCLE ( 'NONE', #168, 1.200000000000005300 ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#211 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#212 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#213 = ORIENTED_EDGE ( 'NONE', *, *, #315, .F. ) ; +#214 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#215 = CIRCLE ( 'NONE', #276, 3.189999999999995100 ) ; +#216 = CIRCLE ( 'NONE', #76, 3.189999999999995100 ) ; +#217 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000005300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#218 = ORIENTED_EDGE ( 'NONE', *, *, #317, .F. ) ; +#219 = DATE_AND_TIME ( #295, #35 ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 6.123233995736767300E-016, 0.0000000000000000000 ) ) ; +#221 = FACE_OUTER_BOUND ( 'NONE', #230, .T. ) ; +#222 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #193, #164 ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( -3.189999999999995100, 5.014928642508409500E-016, 4.094999999999997100 ) ) ; +#224 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#225 = CYLINDRICAL_SURFACE ( 'NONE', #275, 1.200000000000005300 ) ; +#226 = CIRCLE ( 'NONE', #104, 5.000000000000000900 ) ; +#227 = APPROVAL_ROLE ( '' ) ; +#228 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #32 ) ; +#229 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#230 = EDGE_LOOP ( 'NONE', ( #259, #8, #82, #139 ) ) ; +#231 = ORIENTED_EDGE ( 'NONE', *, *, #302, .T. ) ; +#232 = PERSON_AND_ORGANIZATION ( #52, #211 ) ; +#233 = DATE_TIME_ROLE ( 'creation_date' ) ; +#234 = CIRCLE ( 'NONE', #284, 1.200000000000011700 ) ; +#235 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#236 = ORIENTED_EDGE ( 'NONE', *, *, #310, .T. ) ; +#237 = PERSON_AND_ORGANIZATION ( #52, #211 ) ; +#238 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#239 = AXIS2_PLACEMENT_3D ( 'NONE', #118, #46, #186 ) ; +#240 = VECTOR ( 'NONE', #253, 1000.000000000000000 ) ; +#241 = ORIENTED_EDGE ( 'NONE', *, *, #285, .T. ) ; +#242 = EDGE_LOOP ( 'NONE', ( #43, #108 ) ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 4.094999999999997100 ) ) ; +#244 = EDGE_LOOP ( 'NONE', ( #77, #350, #199, #135 ) ) ; +#245 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#246 = PLANE ( 'NONE', #155 ) ; +#247 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ; +#248 = CIRCLE ( 'NONE', #47, 5.000000000000000900 ) ; +#249 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#251 = VERTEX_POINT ( 'NONE', #220 ) ; +#252 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#253 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#254 = ORIENTED_EDGE ( 'NONE', *, *, #304, .T. ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ; +#256 = EDGE_LOOP ( 'NONE', ( #34, #313 ) ) ; +#257 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.094999999999997100 ) ) ; +#259 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ; +#260 = FACE_OUTER_BOUND ( 'NONE', #162, .T. ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.399999999999995900 ) ) ; +#262 = VERTEX_POINT ( 'NONE', #169 ) ; +#263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#264 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( 3.189999999999995100, 0.0000000000000000000, 4.094999999999997100 ) ) ; +#266 = TOROIDAL_SURFACE ( 'NONE', #239, 4.094999999999998000, 0.9050000000000030200 ) ; +#267 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #142, #342 ) ; +#268 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#269 = VECTOR ( 'NONE', #229, 1000.000000000000000 ) ; +#270 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #45, #214 ) ; +#271 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #80, #92 ) ; +#272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#273 = ORIENTED_EDGE ( 'NONE', *, *, #297, .T. ) ; +#274 = AXIS2_PLACEMENT_3D ( 'NONE', #91, #95, #124 ) ; +#275 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #101, #198 ) ; +#276 = AXIS2_PLACEMENT_3D ( 'NONE', #261, #119, #303 ) ; +#277 = ADVANCED_FACE ( 'NONE', ( #154 ), #225, .F. ) ; +#278 = AXIS2_PLACEMENT_3D ( 'NONE', #48, #78, #23 ) ; +#279 = ADVANCED_FACE ( 'NONE', ( #103 ), #40, .F. ) ; +#280 = ADVANCED_FACE ( 'NONE', ( #323 ), #26, .T. ) ; +#281 = TOROIDAL_SURFACE ( 'NONE', #278, 4.094999999999998000, 0.9050000000000030200 ) ; +#282 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #146, #145 ) ; +#283 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#284 = AXIS2_PLACEMENT_3D ( 'NONE', #194, #175, #174 ) ; +#285 = EDGE_CURVE ( 'NONE', #262, #170, #159, .T. ) ; +#286 = ADVANCED_FACE ( 'NONE', ( #166 ), #281, .T. ) ; +#287 = EDGE_CURVE ( 'NONE', #262, #143, #215, .T. ) ; +#288 = ADVANCED_FACE ( 'NONE', ( #90, #151 ), #21, .F. ) ; +#289 = EDGE_CURVE ( 'NONE', #170, #334, #351, .T. ) ; +#290 = ADVANCED_FACE ( 'NONE', ( #298 ), #36, .F. ) ; +#291 = EDGE_CURVE ( 'NONE', #143, #334, #141, .T. ) ; +#292 = ADVANCED_FACE ( 'NONE', ( #221 ), #266, .T. ) ; +#293 = ADVANCED_FACE ( 'NONE', ( #185 ), #343, .T. ) ; +#294 = VERTEX_POINT ( 'NONE', #113 ) ; +#295 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#296 = ADVANCED_FACE ( 'NONE', ( #260 ), #97, .F. ) ; +#297 = EDGE_CURVE ( 'NONE', #337, #12, #209, .T. ) ; +#298 = FACE_OUTER_BOUND ( 'NONE', #187, .T. ) ; +#299 = ADVANCED_FACE ( 'NONE', ( #192, #71 ), #246, .F. ) ; +#300 = EDGE_CURVE ( 'NONE', #337, #346, #16, .T. ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 3.189999999999995100, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#302 = EDGE_CURVE ( 'NONE', #12, #132, #15, .T. ) ; +#303 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#304 = EDGE_CURVE ( 'NONE', #73, #9, #248, .T. ) ; +#305 = EDGE_CURVE ( 'NONE', #9, #251, #332, .T. ) ; +#306 = VECTOR ( 'NONE', #318, 1000.000000000000000 ) ; +#307 = VECTOR ( 'NONE', #268, 1000.000000000000000 ) ; +#308 = EDGE_CURVE ( 'NONE', #73, #294, #55, .T. ) ; +#309 = EDGE_CURVE ( 'NONE', #73, #170, #176, .T. ) ; +#310 = EDGE_CURVE ( 'NONE', #334, #170, #183, .T. ) ; +#311 = EDGE_CURVE ( 'NONE', #9, #334, #137, .T. ) ; +#312 = EDGE_CURVE ( 'NONE', #9, #73, #41, .T. ) ; +#313 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ; +#314 = DATE_AND_TIME ( #44, #109 ) ; +#315 = EDGE_CURVE ( 'NONE', #294, #251, #226, .T. ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 1.200000000000011700, 0.0000000000000000000, 3.399999999999995900 ) ) ; +#317 = EDGE_CURVE ( 'NONE', #12, #337, #160, .T. ) ; +#318 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#319 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#320 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #100 ) ) ; +#321 = EDGE_CURVE ( 'NONE', #132, #346, #27, .T. ) ; +#322 = EDGE_CURVE ( 'NONE', #143, #262, #216, .T. ) ; +#323 = FACE_OUTER_BOUND ( 'NONE', #122, .T. ) ; +#324 = CC_DESIGN_SECURITY_CLASSIFICATION ( #336, ( #348 ) ) ; +#325 = CC_DESIGN_APPROVAL ( #329, ( #336 ) ) ; +#326 = APPROVAL_ROLE ( '' ) ; +#327 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ; +#328 = PERSON_AND_ORGANIZATION ( #52, #211 ) ; +#329 = APPROVAL ( #63, 'UNSPECIFIED' ) ; +#330 = MECHANICAL_CONTEXT ( 'NONE', #110, 'mechanical' ) ; +#331 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #314, #204, ( #336 ) ) ; +#332 = LINE ( 'NONE', #84, #120 ) ; +#333 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ; +#334 = VERTEX_POINT ( 'NONE', #265 ) ; +#335 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #237, #30, ( #336 ) ) ; +#336 = SECURITY_CLASSIFICATION ( '', '', #179 ) ; +#337 = VERTEX_POINT ( 'NONE', #99 ) ; +#338 = LOCAL_TIME ( 15, 7, 31.00000000000000000, #65 ) ; +#339 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #328, #4, ( #348 ) ) ; +#340 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #51, #152, ( #348 ) ) ; +#341 = ORIENTED_EDGE ( 'NONE', *, *, #302, .F. ) ; +#342 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#343 = CYLINDRICAL_SURFACE ( 'NONE', #102, 5.000000000000000900 ) ; +#344 = CC_DESIGN_APPROVAL ( #345, ( #348 ) ) ; +#345 = APPROVAL ( #349, 'UNSPECIFIED' ) ; +#346 = VERTEX_POINT ( 'NONE', #22 ) ; +#347 = PERSON_AND_ORGANIZATION ( #52, #211 ) ; +#348 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #100, .NOT_KNOWN. ) ; +#349 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#350 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ; +#351 = CIRCLE ( 'NONE', #270, 3.189999999999995100 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Body.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Body.step new file mode 100644 index 0000000..3df9683 --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Body.step @@ -0,0 +1,4701 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Body.STEP', + '2013-11-14T05:07:17', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = FACE_OUTER_BOUND ( 'NONE', #934, .T. ) ; +#2 = LINE ( 'NONE', #3382, #1507 ) ; +#3 = AXIS2_PLACEMENT_3D ( 'NONE', #2236, #190, #2591 ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.50000000000000400, 8.699999999999995700 ) ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6 = AXIS2_PLACEMENT_3D ( 'NONE', #3584, #3226, #1149 ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 2.500000000000005800, 72.05080000000002400 ) ) ; +#8 = EDGE_LOOP ( 'NONE', ( #3666, #4147, #1212, #3874 ) ) ; +#9 = VECTOR ( 'NONE', #1120, 1000.000000000000000 ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( -6.938893903907228400E-014, 2.499999999999993300, 80.00000000000002800 ) ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -12.99999999999999800, 5.984795992119975800E-015 ) ) ; +#12 = ADVANCED_FACE ( 'NONE', ( #2608 ), #3419, .F. ) ; +#13 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#14 = AXIS2_PLACEMENT_3D ( 'NONE', #1280, #2328, #276 ) ; +#15 = FACE_OUTER_BOUND ( 'NONE', #834, .T. ) ; +#16 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#17 = EDGE_LOOP ( 'NONE', ( #306, #1514, #4101 ) ) ; +#18 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#19 = FACE_OUTER_BOUND ( 'NONE', #3365, .T. ) ; +#20 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#21 = ORIENTED_EDGE ( 'NONE', *, *, #606, .F. ) ; +#22 = PLANE ( 'NONE', #3884 ) ; +#23 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#24 = EDGE_LOOP ( 'NONE', ( #1097, #1106 ) ) ; +#25 = VERTEX_POINT ( 'NONE', #3443 ) ; +#26 = AXIS2_PLACEMENT_3D ( 'NONE', #4149, #393, #1059 ) ; +#27 = AXIS2_PLACEMENT_3D ( 'NONE', #3501, #1408, #3850 ) ; +#28 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -10.50000000000000000, 5.000000000000000900 ) ) ; +#30 = ORIENTED_EDGE ( 'NONE', *, *, #2248, .F. ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#32 = ORIENTED_EDGE ( 'NONE', *, *, #1900, .T. ) ; +#33 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.301042606982605100E-016 ) ) ; +#34 = ORIENTED_EDGE ( 'NONE', *, *, #1072, .F. ) ; +#35 = ORIENTED_EDGE ( 'NONE', *, *, #2689, .T. ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -15.00000000000000200, 67.55000000000002600 ) ) ; +#37 = ADVANCED_FACE ( 'NONE', ( #945 ), #1562, .T. ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 69.95000000000004500 ) ) ; +#39 = ORIENTED_EDGE ( 'NONE', *, *, #3229, .F. ) ; +#40 = MANIFOLD_SOLID_BREP ( 'Mirror3', #3438 ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.991006225469872600, 16.15537812313072400 ) ) ; +#42 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#43 = VERTEX_POINT ( 'NONE', #7 ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 22.72802639239267800, 23.30402036370532300 ) ) ; +#45 = CARTESIAN_POINT ( 'NONE', ( 28.45072628588555500, 4.469460672393005900, 77.31604266366450400 ) ) ; +#46 = ORIENTED_EDGE ( 'NONE', *, *, #3080, .T. ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 7.550799999999996200, 80.00000000000000000 ) ) ; +#48 = PLANE ( 'NONE', #1919 ) ; +#49 = ORIENTED_EDGE ( 'NONE', *, *, #662, .T. ) ; +#50 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51 = AXIS2_PLACEMENT_3D ( 'NONE', #769, #3184, #1109 ) ; +#52 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.805559322863033800E-031, 1.387778780781446100E-015 ) ) ; +#53 = CIRCLE ( 'NONE', #3332, 3.189999999999998600 ) ; +#54 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 4.999999999999978700, 77.50000000000002800 ) ) ; +#56 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57 = PLANE ( 'NONE', #404 ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.26166608748628300, 30.13615309578683500 ) ) ; +#59 = CIRCLE ( 'NONE', #3679, 1.199999999999999700 ) ; +#60 = CIRCLE ( 'NONE', #184, 1.200000000000006600 ) ; +#61 = ADVANCED_FACE ( 'NONE', ( #1660 ), #1694, .F. ) ; +#62 = ORIENTED_EDGE ( 'NONE', *, *, #3391, .T. ) ; +#63 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 4.999999999999978700, 77.50000000000002800 ) ) ; +#64 = CIRCLE ( 'NONE', #3089, 1.199999999999999700 ) ; +#65 = CIRCLE ( 'NONE', #3813, 3.189999999999998600 ) ; +#66 = CARTESIAN_POINT ( 'NONE', ( 0.1850065413515484000, 0.03061515434862205700, 75.95623853707361700 ) ) ; +#67 = FACE_OUTER_BOUND ( 'NONE', #619, .T. ) ; +#68 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.059793774530124900, 10.46841981887819800 ) ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.059793774530124900, 10.46841981887820000 ) ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 24.90777038906055900, 36.03529468141651600 ) ) ; +#71 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#72 = AXIS2_PLACEMENT_3D ( 'NONE', #1905, #4311, #2258 ) ; +#73 = CIRCLE ( 'NONE', #1045, 0.5000000000000004400 ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -20.00000000000001800, 80.00000000000002800 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 1.555467961645709000, 4.464357888013620500, 77.31844400217563900 ) ) ; +#76 = VERTEX_POINT ( 'NONE', #2405 ) ; +#77 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 4.999999999999993800, 78.75000000000002800 ) ) ; +#78 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#79 = FACE_OUTER_BOUND ( 'NONE', #3093, .T. ) ; +#80 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000001100, 80.00000000000001400 ) ) ; +#81 = ORIENTED_EDGE ( 'NONE', *, *, #1936, .T. ) ; +#82 = AXIS2_PLACEMENT_3D ( 'NONE', #518, #2928, #859 ) ; +#83 = VERTEX_POINT ( 'NONE', #215 ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -22.50000000000000400, 55.00000000000000700 ) ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( 0.003274186659834775900, 0.6566261947384580700, 75.13927510370884000 ) ) ; +#86 = ORIENTED_EDGE ( 'NONE', *, *, #3330, .F. ) ; +#87 = ADVANCED_FACE ( 'NONE', ( #659 ), #1912, .F. ) ; +#88 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -20.00000000000001100, 58.80000000000000400 ) ) ; +#89 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 17.41092094966508000, 23.01925579636884200 ) ) ; +#90 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884036700E-017, -1.000000000000000000 ) ) ; +#91 = VERTEX_POINT ( 'NONE', #2263 ) ; +#92 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#93 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#94 = EDGE_LOOP ( 'NONE', ( #3054, #3114, #3166, #3216 ) ) ; +#95 = ADVANCED_FACE ( 'NONE', ( #3314 ), #2375, .T. ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -22.50000000000000000, -1.741872061729458700E-015 ) ) ; +#97 = AXIS2_PLACEMENT_3D ( 'NONE', #1917, #4321, #2268 ) ; +#98 = AXIS2_PLACEMENT_3D ( 'NONE', #4157, #2098, #56 ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -107.4621125123532600, -2.595512782538550200E-015 ) ) ; +#100 = ORIENTED_EDGE ( 'NONE', *, *, #516, .F. ) ; +#101 = ORIENTED_EDGE ( 'NONE', *, *, #1233, .T. ) ; +#102 = EDGE_LOOP ( 'NONE', ( #4023, #4049, #4054, #152 ) ) ; +#103 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000005800, 67.00000000000002800 ) ) ; +#105 = VERTEX_POINT ( 'NONE', #2275 ) ; +#106 = AXIS2_PLACEMENT_3D ( 'NONE', #557, #1555, #895 ) ; +#107 = ORIENTED_EDGE ( 'NONE', *, *, #3836, .F. ) ; +#108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.89746834307450000, 15.75515259137485700 ) ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( 29.86758637246532200, 0.07089995602447669900, 75.81454276716495100 ) ) ; +#111 = ORIENTED_EDGE ( 'NONE', *, *, #3048, .T. ) ; +#112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#113 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#114 = EDGE_LOOP ( 'NONE', ( #2341, #2376, #2392, #2400 ) ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -15.00000000000000200, 68.75000000000002800 ) ) ; +#116 = ADVANCED_FACE ( 'NONE', ( #778 ), #567, .F. ) ; +#117 = VECTOR ( 'NONE', #1239, 1000.000000000000000 ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( 29.60477206964945700, 21.97443718698748700, 66.21205850591070400 ) ) ; +#119 = AXIS2_PLACEMENT_3D ( 'NONE', #3620, #1517, #3954 ) ; +#120 = CIRCLE ( 'NONE', #4239, 5.050799999999994400 ) ; +#121 = CYLINDRICAL_SURFACE ( 'NONE', #1226, 5.000000000000000000 ) ; +#122 = VERTEX_POINT ( 'NONE', #573 ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000005800, 72.05080000000002400 ) ) ; +#124 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 17.90437616649214900, 12.07616055388812600 ) ) ; +#125 = FACE_OUTER_BOUND ( 'NONE', #2247, .T. ) ; +#126 = VECTOR ( 'NONE', #2937, 1000.000000000000000 ) ; +#127 = AXIS2_PLACEMENT_3D ( 'NONE', #1390, #3831, #1728 ) ; +#128 = LINE ( 'NONE', #2065, #920 ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.499999999999996900, 15.49999999999998600 ) ) ; +#130 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#131 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -25.00000000000000000, -3.252606517456512900E-015 ) ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 3.619644048906320400, 5.609761969967628700 ) ) ; +#133 = VECTOR ( 'NONE', #2884, 1000.000000000000000 ) ; +#134 = AXIS2_PLACEMENT_3D ( 'NONE', #4048, #1976, #4376 ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 29.10221541722869500, 22.86036640551388300, 70.17736703020767700 ) ) ; +#136 = ADVANCED_FACE ( 'NONE', ( #4097 ), #3213, .F. ) ; +#137 = CYLINDRICAL_SURFACE ( 'NONE', #1559, 3.189999999999998600 ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 27.49999999999999600, 2.323665501014923900, 77.50000000000004300 ) ) ; +#139 = EDGE_LOOP ( 'NONE', ( #1841, #1865, #1899, #1910 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 10.36740953665976100, 10.26899922923679200 ) ) ; +#141 = AXIS2_PLACEMENT_3D ( 'NONE', #3669, #1565, #4000 ) ; +#142 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#143 = VECTOR ( 'NONE', #3636, 1000.000000000000000 ) ; +#144 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#145 = ORIENTED_EDGE ( 'NONE', *, *, #1951, .T. ) ; +#146 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#147 = VERTEX_POINT ( 'NONE', #4031 ) ; +#148 = AXIS2_PLACEMENT_3D ( 'NONE', #504, #2916, #845 ) ; +#149 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 7.625158136161789500E-017 ) ) ; +#150 = VERTEX_POINT ( 'NONE', #1953 ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 14.97809345822747500, 17.08036485655699400 ) ) ; +#152 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .T. ) ; +#153 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#154 = ORIENTED_EDGE ( 'NONE', *, *, #4281, .F. ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 28.85105520563105200, 0.2740463405143240800, 77.10919263742594900 ) ) ; +#156 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 11.12040690831833700, 4.165468211462139100 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -22.90000000000000200, 31.81000000000000600 ) ) ; +#158 = ORIENTED_EDGE ( 'NONE', *, *, #3475, .T. ) ; +#159 = VERTEX_POINT ( 'NONE', #1597 ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999300, 65.56000000000000200 ) ) ; +#161 = ORIENTED_EDGE ( 'NONE', *, *, #1981, .T. ) ; +#162 = AXIS2_PLACEMENT_3D ( 'NONE', #1925, #3345, #1258 ) ; +#163 = EDGE_LOOP ( 'NONE', ( #3652, #3979, #572 ) ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -107.4621125123532600, -1.040176842443419200E-014 ) ) ; +#165 = ORIENTED_EDGE ( 'NONE', *, *, #2014, .T. ) ; +#166 = AXIS2_PLACEMENT_3D ( 'NONE', #227, #4005, #4328 ) ; +#167 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.220446049250313100E-014, 7.703719777548936400E-030 ) ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 6.442061422407314300, 1.338272403960221800 ) ) ; +#169 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#170 = FACE_OUTER_BOUND ( 'NONE', #1217, .T. ) ; +#171 = LOCAL_TIME ( 15, 7, 17.00000000000000000, #1063 ) ; +#172 = AXIS2_PLACEMENT_3D ( 'NONE', #4316, #1232, #1570 ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( 29.83482033433739000, 0.003928704951166680900, 76.14100086755237800 ) ) ; +#174 = CIRCLE ( 'NONE', #3910, 1.199999999999999700 ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.90000000000000200, 35.00000000000000000 ) ) ; +#176 = VECTOR ( 'NONE', #3894, 1000.000000000000000 ) ; +#177 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#178 = AXIS2_PLACEMENT_3D ( 'NONE', #3942, #1850, #4264 ) ; +#179 = LINE ( 'NONE', #1645, #971 ) ; +#180 = CIRCLE ( 'NONE', #3116, 5.050799999999994400 ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 0.4198771106525378000, 0.03306823248295023800, 76.39771451534682000 ) ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.9292467441933746100, 5.030718250994796700 ) ) ; +#183 = PRODUCT ( 'Body', 'Body', '', ( #4233 ) ) ; +#184 = AXIS2_PLACEMENT_3D ( 'NONE', #2523, #467, #2883 ) ; +#185 = VECTOR ( 'NONE', #4351, 1000.000000000000000 ) ; +#186 = AXIS2_PLACEMENT_3D ( 'NONE', #367, #1713, #2768 ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( 26.98050215948559900, -11.62456680932821000, 0.3888356228437209700 ) ) ; +#189 = VECTOR ( 'NONE', #3201, 1000.000000000000000 ) ; +#190 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#191 = ORIENTED_EDGE ( 'NONE', *, *, #3581, .F. ) ; +#192 = EDGE_CURVE ( 'NONE', #1306, #3856, #4314, .T. ) ; +#193 = CIRCLE ( 'NONE', #2206, 5.000000000000000900 ) ; +#194 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #488, #138, #825, #3242, #1165, #3600, #1499, #3938, #1845, #4258, #2201, #155, #2553, #498, #2912, #841, #3257, #1180 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.138360651264128100E-017, 0.0005216237795876561800, 0.001043247559175300900, 0.001564871338762945700, 0.002086495118350590500, 0.002608118897938235500, 0.003129742677525880900, 0.003651366457113525900, 0.004172990236701171400 ), + .UNSPECIFIED. ) ; +#195 = VERTEX_POINT ( 'NONE', #256 ) ; +#196 = ORIENTED_EDGE ( 'NONE', *, *, #3174, .T. ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( 2.481535615249136600, 2.150115727673065800, 77.50019583923212000 ) ) ; +#198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#199 = EDGE_LOOP ( 'NONE', ( #1633, #3667, #3321, #999 ) ) ; +#200 = ORIENTED_EDGE ( 'NONE', *, *, #2038, .T. ) ; +#201 = AXIS2_PLACEMENT_3D ( 'NONE', #1904, #4309, #2256 ) ; +#202 = ORIENTED_EDGE ( 'NONE', *, *, #1428, .T. ) ; +#203 = ORIENTED_EDGE ( 'NONE', *, *, #657, .T. ) ; +#204 = AXIS2_PLACEMENT_3D ( 'NONE', #830, #3245, #1169 ) ; +#205 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#206 = ORIENTED_EDGE ( 'NONE', *, *, #3266, .T. ) ; +#207 = VERTEX_POINT ( 'NONE', #3713 ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.710505431213761500E-015, 0.0000000000000000000 ) ) ; +#209 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#210 = ORIENTED_EDGE ( 'NONE', *, *, #4281, .T. ) ; +#211 = ORIENTED_EDGE ( 'NONE', *, *, #3836, .T. ) ; +#212 = VERTEX_POINT ( 'NONE', #3015 ) ; +#213 = ORIENTED_EDGE ( 'NONE', *, *, #720, .T. ) ; +#214 = AXIS2_PLACEMENT_3D ( 'NONE', #2051, #352, #3994 ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -20.00000000000000400, 36.20000000000000300 ) ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -22.90000000000000200, 35.00000000000000000 ) ) ; +#217 = LINE ( 'NONE', #4319, #4073 ) ; +#218 = AXIS2_PLACEMENT_3D ( 'NONE', #2797, #1022, #3795 ) ; +#219 = ORIENTED_EDGE ( 'NONE', *, *, #3765, .T. ) ; +#220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#221 = CIRCLE ( 'NONE', #243, 1.199999999999999700 ) ; +#222 = TOROIDAL_SURFACE ( 'NONE', #782, 1.250000000000000000, 1.250000000000000000 ) ; +#223 = AXIS2_PLACEMENT_3D ( 'NONE', #2191, #144, #2539 ) ; +#224 = VECTOR ( 'NONE', #1956, 1000.000000000000000 ) ; +#225 = CIRCLE ( 'NONE', #1386, 1.250000000000001100 ) ; +#226 = VECTOR ( 'NONE', #692, 1000.000000000000100 ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 68.75000000000002800 ) ) ; +#228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999995700, 3.749999999999993800, 75.00000000000002800 ) ) ; +#232 = CIRCLE ( 'NONE', #302, 1.250000000000001100 ) ; +#233 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.301042606982605100E-016 ) ) ; +#234 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #3834, #2179, ( #183 ) ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( 0.2563896935457870600, 21.62974084498721100, 71.52394282433186800 ) ) ; +#236 = AXIS2_PLACEMENT_3D ( 'NONE', #2730, #3092, #669 ) ; +#237 = CIRCLE ( 'NONE', #1583, 3.189999999999998600 ) ; +#238 = EDGE_CURVE ( 'NONE', #3498, #3943, #1463, .T. ) ; +#239 = EDGE_LOOP ( 'NONE', ( #807, #4060, #202, #896, #2394 ) ) ; +#240 = FACE_OUTER_BOUND ( 'NONE', #3754, .T. ) ; +#241 = ORIENTED_EDGE ( 'NONE', *, *, #382, .F. ) ; +#242 = EDGE_CURVE ( 'NONE', #2505, #1991, #2497, .T. ) ; +#243 = AXIS2_PLACEMENT_3D ( 'NONE', #4179, #2123, #78 ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 0.9302840839696453500, 5.000000001503242000 ) ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 0.007625408014007647700, 4.475807161493838400, 75.22087482596336400 ) ) ; +#246 = ORIENTED_EDGE ( 'NONE', *, *, #2074, .T. ) ; +#247 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.469446951953616200E-015, -0.0000000000000000000 ) ) ; +#248 = ORIENTED_EDGE ( 'NONE', *, *, #345, .F. ) ; +#249 = AXIS2_PLACEMENT_3D ( 'NONE', #3154, #1077, #2447 ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.50000000000000400, 26.19999999999999900 ) ) ; +#251 = ORIENTED_EDGE ( 'NONE', *, *, #2103, .T. ) ; +#252 = ORIENTED_EDGE ( 'NONE', *, *, #345, .T. ) ; +#253 = ORIENTED_EDGE ( 'NONE', *, *, #699, .F. ) ; +#254 = AXIS2_PLACEMENT_3D ( 'NONE', #3231, #1153, #3589 ) ; +#255 = EDGE_LOOP ( 'NONE', ( #2327, #983, #665, #392, #3168 ) ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.50000000000000400, 23.79999999999999700 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -22.50000000000000400, 55.50000000000000700 ) ) ; +#258 = ORIENTED_EDGE ( 'NONE', *, *, #3110, .T. ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 6.440983308074138800, 1.337611121222928900 ) ) ; +#260 = DIRECTION ( 'NONE', ( 3.469446951953616200E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#261 = ORIENTED_EDGE ( 'NONE', *, *, #3930, .F. ) ; +#262 = AXIS2_PLACEMENT_3D ( 'NONE', #1747, #1412, #50 ) ; +#263 = AXIS2_PLACEMENT_3D ( 'NONE', #866, #3282, #1199 ) ; +#264 = CARTESIAN_POINT ( 'NONE', ( 2.450312734135133400, -11.26463478220950300, 0.6935630076747674200 ) ) ; +#265 = PLANE ( 'NONE', #2164 ) ; +#266 = EDGE_LOOP ( 'NONE', ( #2239, #4327 ) ) ; +#267 = VECTOR ( 'NONE', #2079, 1000.000000000000000 ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 68.75000000000000000 ) ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 11.10778958097881700, 4.155382856274824700 ) ) ; +#270 = LINE ( 'NONE', #3502, #1068 ) ; +#271 = CIRCLE ( 'NONE', #3272, 3.189999999999998600 ) ; +#272 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#273 = LINE ( 'NONE', #2676, #3842 ) ; +#274 = CIRCLE ( 'NONE', #1638, 1.200000000000006600 ) ; +#275 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765829100 ) ) ; +#277 = AXIS2_PLACEMENT_3D ( 'NONE', #3571, #1473, #3912 ) ; +#278 = FACE_OUTER_BOUND ( 'NONE', #2612, .T. ) ; +#279 = LINE ( 'NONE', #1821, #978 ) ; +#280 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 10.95780200319357300, 10.93788730436306400 ) ) ; +#283 = ORIENTED_EDGE ( 'NONE', *, *, #2382, .T. ) ; +#284 = VECTOR ( 'NONE', #757, 1000.000000000000000 ) ; +#285 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.50000000000000400, 7.499999999999996400 ) ) ; +#286 = ORIENTED_EDGE ( 'NONE', *, *, #543, .T. ) ; +#287 = ORIENTED_EDGE ( 'NONE', *, *, #2302, .T. ) ; +#288 = EDGE_CURVE ( 'NONE', #2044, #2505, #1342, .T. ) ; +#289 = ORIENTED_EDGE ( 'NONE', *, *, #3693, .F. ) ; +#290 = VERTEX_POINT ( 'NONE', #2967 ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 65.56000000000003100 ) ) ; +#292 = ORIENTED_EDGE ( 'NONE', *, *, #2938, .F. ) ; +#293 = EDGE_CURVE ( 'NONE', #4066, #2575, #460, .T. ) ; +#294 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -3.550799999999999700, 22.10328947826993600 ) ) ; +#295 = AXIS2_PLACEMENT_3D ( 'NONE', #2283, #233, #2635 ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.45908431921442300, 14.78271232635224000 ) ) ; +#297 = ORIENTED_EDGE ( 'NONE', *, *, #1338, .F. ) ; +#298 = ORIENTED_EDGE ( 'NONE', *, *, #3905, .F. ) ; +#299 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -25.00000000000000700, 55.50000000000000700 ) ) ; +#300 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -20.00000000000000700, 72.00000000000001400 ) ) ; +#301 = ORIENTED_EDGE ( 'NONE', *, *, #1474, .F. ) ; +#302 = AXIS2_PLACEMENT_3D ( 'NONE', #2848, #780, #3197 ) ; +#303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#304 = ORIENTED_EDGE ( 'NONE', *, *, #2298, .T. ) ; +#305 = ADVANCED_FACE ( 'NONE', ( #2174 ), #3919, .F. ) ; +#306 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .F. ) ; +#307 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#308 = AXIS2_PLACEMENT_3D ( 'NONE', #568, #220, #1564 ) ; +#309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#310 = AXIS2_PLACEMENT_3D ( 'NONE', #709, #726, #3141 ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.00000000000000000, 40.00000000000002800 ) ) ; +#312 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 14.64466094067263800, 0.0000000000000000000 ) ) ; +#313 = FACE_OUTER_BOUND ( 'NONE', #1667, .T. ) ; +#314 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4221, #459, #2876, #805 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -1.000003258864014100E-005, 0.0002867084790091693500 ), + .UNSPECIFIED. ) ; +#315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.347358039593635500E-016, -1.000000000000000000 ) ) ; +#316 = VERTEX_POINT ( 'NONE', #2269 ) ; +#317 = CIRCLE ( 'NONE', #27, 1.000000000000000900 ) ; +#318 = FACE_OUTER_BOUND ( 'NONE', #4382, .T. ) ; +#319 = EDGE_CURVE ( 'NONE', #3416, #2044, #1244, .T. ) ; +#320 = ORIENTED_EDGE ( 'NONE', *, *, #1264, .F. ) ; +#321 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#322 = CIRCLE ( 'NONE', #473, 1.199999999999992600 ) ; +#323 = CIRCLE ( 'NONE', #1618, 1.200000000000006600 ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 68.75000000000002800 ) ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -4.991006225469872600, 16.15537812313072400 ) ) ; +#326 = ADVANCED_FACE ( 'NONE', ( #338 ), #3989, .F. ) ; +#327 = EDGE_CURVE ( 'NONE', #3478, #25, #1152, .T. ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 2.550383384147269700E-016, 9.999999999999978700, 77.50000000000002800 ) ) ; +#329 = CYLINDRICAL_SURFACE ( 'NONE', #2956, 5.050800000000001500 ) ; +#330 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 12.62991304686627500, 13.11415256094327800 ) ) ; +#331 = CIRCLE ( 'NONE', #524, 1.250000000000001100 ) ; +#332 = AXIS2_PLACEMENT_3D ( 'NONE', #2175, #2524, #468 ) ; +#333 = LINE ( 'NONE', #3825, #3915 ) ; +#334 = EDGE_LOOP ( 'NONE', ( #2052, #2072 ) ) ; +#335 = AXIS2_PLACEMENT_3D ( 'NONE', #324, #2725, #663 ) ; +#336 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#337 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.775557561562891400E-016, 1.000000000000000000 ) ) ; +#338 = FACE_OUTER_BOUND ( 'NONE', #1150, .T. ) ; +#339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#340 = VERTEX_POINT ( 'NONE', #559 ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 3.170976981108202300, 5.464979876360836800 ) ) ; +#342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999998400, -14.99999999999998000, 69.95000000000004500 ) ) ; +#344 = ORIENTED_EDGE ( 'NONE', *, *, #3710, .T. ) ; +#345 = EDGE_CURVE ( 'NONE', #4013, #952, #3095, .T. ) ; +#346 = ADVANCED_FACE ( 'NONE', ( #240 ), #2613, .F. ) ; +#347 = ORIENTED_EDGE ( 'NONE', *, *, #441, .F. ) ; +#348 = EDGE_LOOP ( 'NONE', ( #2852, #1411, #3616, #3225, #792 ) ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.991006225469872600, 16.15537812313072400 ) ) ; +#350 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#351 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #472 ) ; +#352 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.08715574274765829100, 0.9961946980917455500 ) ) ; +#353 = ORIENTED_EDGE ( 'NONE', *, *, #1171, .F. ) ; +#354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#355 = ORIENTED_EDGE ( 'NONE', *, *, #2129, .F. ) ; +#356 = ORIENTED_EDGE ( 'NONE', *, *, #2387, .F. ) ; +#357 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.602085213965210600E-016, 1.000000000000000000 ) ) ; +#358 = ORIENTED_EDGE ( 'NONE', *, *, #1600, .F. ) ; +#359 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 25.00100000000000800, 61.20000000000002400 ) ) ; +#360 = AXIS2_PLACEMENT_3D ( 'NONE', #4213, #113, #3895 ) ; +#361 = ORIENTED_EDGE ( 'NONE', *, *, #617, .T. ) ; +#362 = ORIENTED_EDGE ( 'NONE', *, *, #485, .T. ) ; +#363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.301042606982605100E-016, 1.000000000000000000 ) ) ; +#364 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -25.00000000000000700, 55.00000000000000700 ) ) ; +#365 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -5.000000000000020400, 77.50000000000002800 ) ) ; +#367 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 68.75000000000000000 ) ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 2.499999999999996900, 15.49999999999998600 ) ) ; +#369 = ADVANCED_FACE ( 'NONE', ( #1946 ), #3373, .F. ) ; +#370 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781442700E-015, 0.0000000000000000000 ) ) ; +#371 = VECTOR ( 'NONE', #3473, 1000.000000000000000 ) ; +#372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#373 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#374 = EDGE_CURVE ( 'NONE', #3722, #735, #3799, .T. ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.49999999999999500, 43.69999999999999600 ) ) ; +#376 = LINE ( 'NONE', #698, #3952 ) ; +#377 = FACE_OUTER_BOUND ( 'NONE', #1049, .T. ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -20.00000000000000000, 10.00000000000000700 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 29.33012701892219100, -10.50000000000000000, 2.500000000000000000 ) ) ; +#380 = VECTOR ( 'NONE', #3021, 1000.000000000000000 ) ; +#381 = FACE_BOUND ( 'NONE', #1154, .T. ) ; +#382 = EDGE_CURVE ( 'NONE', #930, #1118, #2891, .T. ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -22.50000000000000400, 55.50000000000000700 ) ) ; +#384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#385 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 18.16604152944300000, 25.56921442721382200 ) ) ; +#386 = CARTESIAN_POINT ( 'NONE', ( 28.08237492178613000, 4.113446823351174500, 77.43347912600728500 ) ) ; +#387 = FACE_OUTER_BOUND ( 'NONE', #4320, .T. ) ; +#388 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.301042606982605100E-016 ) ) ; +#389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#390 = EDGE_CURVE ( 'NONE', #2459, #3468, #1032, .T. ) ; +#391 = LINE ( 'NONE', #2783, #3961 ) ; +#392 = ORIENTED_EDGE ( 'NONE', *, *, #3102, .F. ) ; +#393 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#394 = ADVANCED_FACE ( 'NONE', ( #3700 ), #3605, .T. ) ; +#395 = VECTOR ( 'NONE', #1081, 1000.000000000000000 ) ; +#396 = ORIENTED_EDGE ( 'NONE', *, *, #2137, .F. ) ; +#397 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 25.00000000000000400, 40.00000000000002800 ) ) ; +#398 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#399 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#400 = VERTEX_POINT ( 'NONE', #4322 ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 24.53863031924657200, 32.09600966508729400 ) ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -25.00100000000001900, 72.50000000000001400 ) ) ; +#403 = ORIENTED_EDGE ( 'NONE', *, *, #1606, .F. ) ; +#404 = AXIS2_PLACEMENT_3D ( 'NONE', #3878, #4194, #2139 ) ; +#405 = AXIS2_PLACEMENT_3D ( 'NONE', #1389, #4142, #2087 ) ; +#406 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 1.224646799147353200E-016 ) ) ; +#407 = VERTEX_POINT ( 'NONE', #84 ) ; +#408 = EDGE_LOOP ( 'NONE', ( #3568, #3583, #3670, #3882, #3983 ) ) ; +#409 = ORIENTED_EDGE ( 'NONE', *, *, #242, .F. ) ; +#410 = ORIENTED_EDGE ( 'NONE', *, *, #2198, .F. ) ; +#411 = EDGE_CURVE ( 'NONE', #3478, #1257, #1839, .T. ) ; +#412 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#413 = PLANE ( 'NONE', #693 ) ; +#414 = ORIENTED_EDGE ( 'NONE', *, *, #390, .F. ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 24.54036932456118700, 32.11157974433843500 ) ) ; +#416 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#417 = CARTESIAN_POINT ( 'NONE', ( 1.148944794368864400, 4.725953659485685200, 77.10919263742593400 ) ) ; +#418 = ORIENTED_EDGE ( 'NONE', *, *, #1851, .F. ) ; +#419 = ORIENTED_EDGE ( 'NONE', *, *, #4402, .T. ) ; +#420 = ADVANCED_FACE ( 'NONE', ( #2656 ), #4359, .F. ) ; +#421 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 68.75000000000002800 ) ) ; +#422 = ORIENTED_EDGE ( 'NONE', *, *, #2482, .F. ) ; +#423 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( 9.507944832929521300E-017, 1.095291891370652000, 75.00000000000002800 ) ) ; +#425 = AXIS2_PLACEMENT_3D ( 'NONE', #3552, #1119, #762 ) ; +#426 = CIRCLE ( 'NONE', #1340, 1.199999999999999700 ) ; +#427 = APPROVAL_DATE_TIME ( #1318, #3464 ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 22.16490272193327700, 21.46727603586168300 ) ) ; +#429 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 1.095188439307472400, 75.00000000000004300 ) ) ; +#430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 68.75000000000002800 ) ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.749999999999972900, 80.00000000000002800 ) ) ; +#433 = LINE ( 'NONE', #766, #1011 ) ; +#434 = LINE ( 'NONE', #917, #3774 ) ; +#435 = ORIENTED_EDGE ( 'NONE', *, *, #2522, .T. ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -5.000000000000020400, 77.50000000000002800 ) ) ; +#437 = CYLINDRICAL_SURFACE ( 'NONE', #973, 2.499999999999998700 ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.550799999999994400, 67.00000000000002800 ) ) ; +#439 = FACE_BOUND ( 'NONE', #2563, .T. ) ; +#440 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#441 = EDGE_CURVE ( 'NONE', #2559, #1792, #1714, .T. ) ; +#442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#443 = FACE_OUTER_BOUND ( 'NONE', #520, .T. ) ; +#444 = ADVANCED_FACE ( 'NONE', ( #19 ), #1610, .F. ) ; +#445 = VERTEX_POINT ( 'NONE', #2857 ) ; +#446 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 14.97809345841760000, 17.08036485646584200 ) ) ; +#448 = CARTESIAN_POINT ( 'NONE', ( 29.74776692697516700, 0.01275685208050111700, 76.09432346314818600 ) ) ; +#449 = EDGE_CURVE ( 'NONE', #3505, #1168, #838, .T. ) ; +#450 = VECTOR ( 'NONE', #93, 1000.000000000000000 ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 77.50000000000002800 ) ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -4.550800000000000600, 21.18695830425251000 ) ) ; +#453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#454 = LINE ( 'NONE', #4151, #3791 ) ; +#455 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#456 = VERTEX_POINT ( 'NONE', #4079 ) ; +#457 = AXIS2_PLACEMENT_3D ( 'NONE', #451, #2865, #799 ) ; +#458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( 0.08087788394604095200, 6.505213034908029200E-016, 76.19307411316900400 ) ) ; +#460 = CIRCLE ( 'NONE', #141, 2.500000000000002200 ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 29.31312625513684700, 22.53273858465124800, 66.80000903881216300 ) ) ; +#462 = ORIENTED_EDGE ( 'NONE', *, *, #2218, .T. ) ; +#463 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#464 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1316, #312, #1332, #3770 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794897900 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243646000, 0.8047378541243646000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#465 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999300, 17.62432624809523000, 11.62329991227470700 ) ) ; +#466 = ORIENTED_EDGE ( 'NONE', *, *, #1465, .T. ) ; +#467 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#468 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#469 = ORIENTED_EDGE ( 'NONE', *, *, #3790, .T. ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 38.19000000000000500 ) ) ; +#471 = ORIENTED_EDGE ( 'NONE', *, *, #2059, .T. ) ; +#472 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #1590, #2293 ) ; +#473 = AXIS2_PLACEMENT_3D ( 'NONE', #928, #3347, #1259 ) ; +#474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#475 = ORIENTED_EDGE ( 'NONE', *, *, #2992, .T. ) ; +#476 = ADVANCED_FACE ( 'NONE', ( #3472 ), #2557, .T. ) ; +#477 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#478 = EDGE_CURVE ( 'NONE', #2958, #150, #713, .T. ) ; +#479 = ORIENTED_EDGE ( 'NONE', *, *, #610, .T. ) ; +#480 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.301042606982605100E-016, 1.000000000000000000 ) ) ; +#481 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 4.901885784835946500, 6.130111304375261300 ) ) ; +#482 = ORIENTED_EDGE ( 'NONE', *, *, #3440, .T. ) ; +#483 = CARTESIAN_POINT ( 'NONE', ( 29.31194328335398300, 22.53475648087664900, 70.69741047122596500 ) ) ; +#484 = ORIENTED_EDGE ( 'NONE', *, *, #3256, .F. ) ; +#485 = EDGE_CURVE ( 'NONE', #3227, #1948, #2047, .T. ) ; +#486 = AXIS2_PLACEMENT_3D ( 'NONE', #3207, #1791, #1809 ) ; +#487 = ORIENTED_EDGE ( 'NONE', *, *, #2281, .T. ) ; +#488 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000006800, 2.499999999999987100, 77.50000000000002800 ) ) ; +#489 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 14.05160888835111700, 6.882228110698264300 ) ) ; +#490 = VERTEX_POINT ( 'NONE', #2727 ) ; +#491 = ORIENTED_EDGE ( 'NONE', *, *, #1360, .T. ) ; +#492 = EDGE_CURVE ( 'NONE', #3274, #2357, #3368, .T. ) ; +#493 = CARTESIAN_POINT ( 'NONE', ( 1.014629686940790900, 23.02104133883128500, 67.70482927624782100 ) ) ; +#494 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 16.13094401523287400, 19.57723520470814900 ) ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.500000000000005800, 72.05080000000002400 ) ) ; +#496 = AXIS2_PLACEMENT_3D ( 'NONE', #2140, #2847, #779 ) ; +#497 = FACE_BOUND ( 'NONE', #2432, .T. ) ; +#498 = CARTESIAN_POINT ( 'NONE', ( 29.24409906248175500, 0.1130037147290981900, 76.79912110019967000 ) ) ; +#499 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 6.907677829280581600, 7.251838159651102300 ) ) ; +#500 = CIRCLE ( 'NONE', #2025, 1.199999999999999700 ) ; +#501 = LINE ( 'NONE', #1692, #1377 ) ; +#502 = AXIS2_PLACEMENT_3D ( 'NONE', #3187, #771, #3543 ) ; +#503 = AXIS2_PLACEMENT_3D ( 'NONE', #3630, #2231, #4245 ) ; +#504 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -13.00000000000000200, 2.500000000000000000 ) ) ; +#505 = CYLINDRICAL_SURFACE ( 'NONE', #1920, 1.199999999999999700 ) ; +#506 = VECTOR ( 'NONE', #1632, 1000.000000000000000 ) ; +#507 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#509 = CIRCLE ( 'NONE', #51, 5.050800000000001500 ) ; +#510 = EDGE_CURVE ( 'NONE', #25, #2386, #3336, .T. ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -20.00000000000000700, 72.50000000000001400 ) ) ; +#512 = CIRCLE ( 'NONE', #1198, 1.199999999999999700 ) ; +#513 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#514 = EDGE_LOOP ( 'NONE', ( #4325, #3663 ) ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 5.245319307407553900, 0.8779430586393696100 ) ) ; +#516 = EDGE_CURVE ( 'NONE', #538, #1257, #608, .T. ) ; +#517 = LINE ( 'NONE', #3512, #3039 ) ; +#518 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996100, 4.999999999999993800, 77.50000000000002800 ) ) ; +#519 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#520 = EDGE_LOOP ( 'NONE', ( #3627, #3655, #3662, #3672 ) ) ; +#521 = CARTESIAN_POINT ( 'NONE', ( 29.74776692697516700, 0.01275685208050111700, 76.09432346314818600 ) ) ; +#522 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1605, #1265, #1961, #4360, #2309, #264, #2664, #602, #3020, #950, #3369, #1275, #3720, #1619 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -1.414214190914786100E-005, 0.001463395846179345300, 0.002940933834267838100, 0.003679702828312082500, 0.004418471822356328200, 0.005157240816400573400, 0.005896009810444817800 ), + .UNSPECIFIED. ) ; +#523 = ORIENTED_EDGE ( 'NONE', *, *, #3618, .F. ) ; +#524 = AXIS2_PLACEMENT_3D ( 'NONE', #1488, #3925, #1831 ) ; +#525 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#526 = ORIENTED_EDGE ( 'NONE', *, *, #2311, .F. ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -15.00000000000000200, 65.56000000000003100 ) ) ; +#528 = ORIENTED_EDGE ( 'NONE', *, *, #1163, .T. ) ; +#529 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #311, #2016, #653, #3078, #1003, #3422, #1331, #3768, #1668, #4093, #2031, #4420, #2380, #330, #2729, #668, #3091, #1014, #3436, #1345, #3783, #1681, #4107, #2043, #4431, #2397, #341, #2744, #684, #3104 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.005455014820991003700, 0.01091002964198200700, 0.01363753705247750500, 0.01636504446297299900, 0.02182005928396399400, 0.02727507410495498600, 0.03000258151545048100, 0.03273008892594597700, 0.03409384263119372100, 0.03545759633644146600, 0.03818510374693696900, 0.03954885745218472000, 0.04091261115743246400, 0.04364011856792796000 ), + .UNSPECIFIED. ) ; +#530 = ORIENTED_EDGE ( 'NONE', *, *, #935, .F. ) ; +#531 = CARTESIAN_POINT ( 'NONE', ( 0.7534308387918432500, 0.1123738044277370200, 76.79646748033825100 ) ) ; +#532 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ; +#533 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 1.366449512781093200, 0.04532393931315683400 ) ) ; +#534 = EDGE_LOOP ( 'NONE', ( #981, #992 ) ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( 31.24999999999995700, 4.999999999999995600, 77.50000000000002800 ) ) ; +#536 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .F. ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 26.00332671041162800, -12.29367823102376500, 0.09749304790010381000 ) ) ; +#538 = VERTEX_POINT ( 'NONE', #2918 ) ; +#539 = EDGE_CURVE ( 'NONE', #1093, #3468, #3265, .T. ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -3.550799999999999700, 22.10328947826993600 ) ) ; +#541 = ORIENTED_EDGE ( 'NONE', *, *, #925, .F. ) ; +#542 = ORIENTED_EDGE ( 'NONE', *, *, #2668, .F. ) ; +#543 = EDGE_CURVE ( 'NONE', #2146, #212, #4270, .T. ) ; +#544 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999923200, 2.499999999999993800, 77.50000000000002800 ) ) ; +#545 = VECTOR ( 'NONE', #2861, 1000.000000000000000 ) ; +#546 = APPROVAL_PERSON_ORGANIZATION ( #1432, #3464, #2545 ) ; +#547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#548 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4154, #397, #3511 ), + ( #1419, #3857, #1753 ), + ( #4173, #2116, #70 ), + ( #2466, #415, #2820 ), + ( #755, #3175, #1100 ), + ( #3528, #1433, #3875 ), + ( #1773, #4190, #2135 ), + ( #89, #2484, #428 ), + ( #2842, #775, #3193 ), + ( #1116, #3546, #1451 ), + ( #3891, #1793, #4209 ), + ( #2154, #109, #2503 ), + ( #447, #2862, #796 ), + ( #3209, #1132, #3566 ), + ( #1468, #3908, #1810 ), + ( #4228, #2172, #124 ), + ( #2521, #465, #2881 ), + ( #811, #3228, #1151 ), + ( #3585, #1485, #3923 ), + ( #1828, #4243, #2187 ), + ( #140, #2535, #489 ), + ( #2897, #826, #3243 ), + ( #1166, #3602, #1500 ), + ( #3939, #1846, #4259 ), + ( #2202, #156, #2555 ), + ( #499, #2913, #842 ), + ( #3258, #1181, #3617 ), + ( #1515, #3951, #1861 ), + ( #4275, #2214, #168 ), + ( #2570, #515, #2925 ), + ( #857, #3270, #1191 ), + ( #3629, #1528, #3964 ), + ( #1874, #4289, #2227 ), + ( #182, #2586, #533 ), + ( #2942, #871, #3288 ), + ( #1205, #3646, #1541 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -8.673617379884035500E-019, 0.005423112232937439200, 0.01084622446587487800, 0.01626933669881231600, 0.01898089281528103600, 0.02169244893174975700, 0.02440400504821847700, 0.02575978310645283400, 0.02711556116468719400, 0.02982711728115591100, 0.03253867339762463200, 0.03389445145585899500, 0.03525022951409335200, 0.03796178563056207300, 0.03931756368879643600, 0.04067334174703079300, 0.04202911980526515000, 0.04338489786349951400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865473500, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865473500, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#549 = VECTOR ( 'NONE', #1025, 1000.000000000000000 ) ; +#550 = FACE_OUTER_BOUND ( 'NONE', #2527, .T. ) ; +#551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.178938284644431100E-016 ) ) ; +#552 = EDGE_LOOP ( 'NONE', ( #736, #774, #798, #843 ) ) ; +#553 = CIRCLE ( 'NONE', #4015, 5.050800000000001500 ) ; +#554 = CIRCLE ( 'NONE', #4260, 5.050799999999994400 ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -20.00000000000001800, 80.00000000000002800 ) ) ; +#556 = PLANE ( 'NONE', #97 ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#558 = VECTOR ( 'NONE', #1621, 1000.000000000000000 ) ; +#559 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -20.00000000000000400, 36.20000000000000300 ) ) ; +#560 = FACE_BOUND ( 'NONE', #2456, .T. ) ; +#561 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -25.00100000000001900, 72.50000000000001400 ) ) ; +#562 = EDGE_CURVE ( 'NONE', #3230, #1550, #1398, .T. ) ; +#563 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -20.00000000000000400, 55.00000000000000700 ) ) ; +#564 = CYLINDRICAL_SURFACE ( 'NONE', #1745, 5.000000000000000900 ) ; +#565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#566 = ORIENTED_EDGE ( 'NONE', *, *, #2092, .F. ) ; +#567 = CYLINDRICAL_SURFACE ( 'NONE', #166, 3.189999999999998600 ) ; +#568 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.250000000000000000, 77.50000000000002800 ) ) ; +#569 = VERTEX_POINT ( 'NONE', #1195 ) ; +#570 = EDGE_CURVE ( 'NONE', #1168, #3505, #1516, .T. ) ; +#571 = ORIENTED_EDGE ( 'NONE', *, *, #2330, .F. ) ; +#572 = ORIENTED_EDGE ( 'NONE', *, *, #662, .F. ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 19.99999999999999600, 69.95000000000001700 ) ) ; +#574 = VERTEX_POINT ( 'NONE', #3277 ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999998400, -14.99999999999998000, 65.56000000000003100 ) ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 2.782106867166771700E-015, 5.000000000000000900 ) ) ; +#577 = ORIENTED_EDGE ( 'NONE', *, *, #3374, .T. ) ; +#578 = AXIS2_PLACEMENT_3D ( 'NONE', #3029, #959, #3378 ) ; +#579 = EDGE_LOOP ( 'NONE', ( #2990, #3001, #3011, #3047 ) ) ; +#580 = VERTEX_POINT ( 'NONE', #3970 ) ; +#581 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#582 = ORIENTED_EDGE ( 'NONE', *, *, #3359, .F. ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( 0.6120914523067170200, 22.40246552145414300, 70.85834573218411900 ) ) ; +#584 = ORIENTED_EDGE ( 'NONE', *, *, #2281, .F. ) ; +#585 = VERTEX_POINT ( 'NONE', #2561 ) ; +#586 = EDGE_CURVE ( 'NONE', #3722, #1308, #3147, .T. ) ; +#587 = ORIENTED_EDGE ( 'NONE', *, *, #2387, .T. ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 1.368900514809761300, 1.056762333104815700E-016 ) ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( 0.03661312917875433900, 4.696797863288980900, 75.43067845327584600 ) ) ; +#590 = EDGE_CURVE ( 'NONE', #490, #4280, #2322, .T. ) ; +#591 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 9.999999999999994700, 77.50000000000002800 ) ) ; +#592 = VECTOR ( 'NONE', #4112, 1000.000000000000000 ) ; +#593 = CYLINDRICAL_SURFACE ( 'NONE', #3573, 1.200000000000006600 ) ; +#594 = LINE ( 'NONE', #1010, #2306 ) ; +#595 = LINE ( 'NONE', #3084, #2308 ) ; +#596 = FACE_OUTER_BOUND ( 'NONE', #2246, .T. ) ; +#597 = LINE ( 'NONE', #299, #506 ) ; +#598 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.347358039593635500E-016, -1.000000000000000000 ) ) ; +#599 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 4.896380179886270100, 6.127646805352394000 ) ) ; +#600 = CARTESIAN_POINT ( 'NONE', ( 29.67174392874563100, 4.979533602320749700, 76.25047654481407700 ) ) ; +#601 = FACE_OUTER_BOUND ( 'NONE', #3238, .T. ) ; +#602 = CARTESIAN_POINT ( 'NONE', ( 1.903400356305146900, -10.94404729490413400, 1.068048958878645300 ) ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 20.00000000000001800, 67.54999999999999700 ) ) ; +#604 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#605 = FACE_OUTER_BOUND ( 'NONE', #1356, .T. ) ; +#606 = EDGE_CURVE ( 'NONE', #3856, #538, #1288, .T. ) ; +#607 = ORIENTED_EDGE ( 'NONE', *, *, #3290, .T. ) ; +#608 = LINE ( 'NONE', #328, #4145 ) ; +#609 = EDGE_LOOP ( 'NONE', ( #613, #3372, #717, #4364 ) ) ; +#610 = EDGE_CURVE ( 'NONE', #3149, #1896, #517, .T. ) ; +#611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#612 = CARTESIAN_POINT ( 'NONE', ( -1.985584582512329900E-013, 11.56313197926230700, 4.526941316879262300 ) ) ; +#613 = ORIENTED_EDGE ( 'NONE', *, *, #3744, .T. ) ; +#614 = ORIENTED_EDGE ( 'NONE', *, *, #2420, .T. ) ; +#615 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -5.000000000000020400, 80.00000000000002800 ) ) ; +#616 = EDGE_LOOP ( 'NONE', ( #1524, #3861, #1263, #541 ) ) ; +#617 = EDGE_CURVE ( 'NONE', #3328, #456, #4050, .T. ) ; +#618 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.991006225469872600, 21.20617812313072600 ) ) ; +#619 = EDGE_LOOP ( 'NONE', ( #1029, #3698, #2340, #418 ) ) ; +#620 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .F. ) ; +#621 = EDGE_LOOP ( 'NONE', ( #3544, #2171, #2101, #261 ) ) ; +#622 = ORIENTED_EDGE ( 'NONE', *, *, #539, .F. ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 33.80000000000000400 ) ) ; +#624 = ORIENTED_EDGE ( 'NONE', *, *, #2587, .F. ) ; +#625 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 14.76225443035722800, 7.688901760251667400 ) ) ; +#626 = EDGE_LOOP ( 'NONE', ( #3619, #938, #4171, #3971, #1582, #804, #2238, #62, #4277, #344, #2846, #2296, #809, #1006, #1622, #4230 ) ) ; +#627 = AXIS2_PLACEMENT_3D ( 'NONE', #2580, #1537, #3341 ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -20.00000000000000000, 10.00000000000000700 ) ) ; +#629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#630 = ORIENTED_EDGE ( 'NONE', *, *, #2731, .T. ) ; +#631 = EDGE_CURVE ( 'NONE', #195, #2675, #2105, .T. ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.50000000000000000, 1.040834085586085200E-015 ) ) ; +#633 = LINE ( 'NONE', #2520, #4181 ) ; +#634 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#635 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.50000000000000400, 24.99999999999999600 ) ) ; +#636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#637 = ADVANCED_FACE ( 'NONE', ( #1200 ), #1774, .F. ) ; +#638 = VECTOR ( 'NONE', #2373, 1000.000000000000000 ) ; +#639 = CIRCLE ( 'NONE', #3883, 2.500000000000002200 ) ; +#640 = EDGE_CURVE ( 'NONE', #1202, #3230, #1816, .T. ) ; +#641 = VERTEX_POINT ( 'NONE', #2863 ) ; +#642 = FACE_BOUND ( 'NONE', #3801, .T. ) ; +#643 = FACE_OUTER_BOUND ( 'NONE', #1214, .T. ) ; +#644 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#645 = AXIS2_PLACEMENT_3D ( 'NONE', #3880, #1778, #4195 ) ; +#646 = LINE ( 'NONE', #1634, #3306 ) ; +#647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#648 = FACE_OUTER_BOUND ( 'NONE', #2372, .T. ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 36.20000000000000300 ) ) ; +#650 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999996400, 1.250000000000024200, 77.50000000000002800 ) ) ; +#651 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#652 = CIRCLE ( 'NONE', #1965, 1.199999999999999700 ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 19.91498057161419100, 36.34312587964383600 ) ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996100, 3.749999999999993800, 77.50000000000002800 ) ) ; +#655 = ORIENTED_EDGE ( 'NONE', *, *, #3048, .F. ) ; +#656 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#657 = EDGE_CURVE ( 'NONE', #988, #670, #3769, .T. ) ; +#658 = ADVANCED_FACE ( 'NONE', ( #3966, #3854 ), #2991, .F. ) ; +#659 = FACE_OUTER_BOUND ( 'NONE', #3978, .T. ) ; +#660 = ORIENTED_EDGE ( 'NONE', *, *, #2452, .T. ) ; +#661 = VERTEX_POINT ( 'NONE', #1134 ) ; +#662 = EDGE_CURVE ( 'NONE', #3856, #3361, #2493, .T. ) ; +#663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#664 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#665 = ORIENTED_EDGE ( 'NONE', *, *, #3444, .T. ) ; +#666 = ORIENTED_EDGE ( 'NONE', *, *, #3256, .T. ) ; +#667 = ORIENTED_EDGE ( 'NONE', *, *, #1335, .T. ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 10.95780200344058000, 10.93788730413677800 ) ) ; +#669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#670 = VERTEX_POINT ( 'NONE', #3692 ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 68.75000000000000000 ) ) ; +#672 = AXIS2_PLACEMENT_3D ( 'NONE', #3318, #230, #2632 ) ; +#673 = ORIENTED_EDGE ( 'NONE', *, *, #2515, .T. ) ; +#674 = ORIENTED_EDGE ( 'NONE', *, *, #2361, .T. ) ; +#675 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -107.4621125123532700, 80.00000000000001400 ) ) ; +#676 = ORIENTED_EDGE ( 'NONE', *, *, #3236, .T. ) ; +#677 = VERTEX_POINT ( 'NONE', #1958 ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000000000, 0.0000000000000000000, 77.50000000000002800 ) ) ; +#679 = ADVANCED_FACE ( 'NONE', ( #1092 ), #2307, .F. ) ; +#680 = EDGE_LOOP ( 'NONE', ( #298, #1297, #1170, #655 ) ) ; +#681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#682 = APPROVAL ( #477, 'UNSPECIFIED' ) ; +#683 = AXIS2_PLACEMENT_3D ( 'NONE', #4330, #2277, #229 ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( -1.043212053209750500E-030, 0.9303193515329504200, 4.999999999999998200 ) ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 4.999999999999993800, 76.25000000000002800 ) ) ; +#686 = EDGE_CURVE ( 'NONE', #988, #2044, #1662, .T. ) ; +#687 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#688 = VECTOR ( 'NONE', #1475, 1000.000000000000000 ) ; +#689 = FACE_OUTER_BOUND ( 'NONE', #163, .T. ) ; +#690 = EDGE_CURVE ( 'NONE', #3856, #2710, #2943, .T. ) ; +#691 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765829100 ) ) ; +#693 = AXIS2_PLACEMENT_3D ( 'NONE', #2818, #1099, #3527 ) ; +#694 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#695 = CIRCLE ( 'NONE', #2724, 5.050800000000001500 ) ; +#696 = VECTOR ( 'NONE', #307, 1000.000000000000000 ) ; +#697 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#698 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -20.00000000000000400, 4.770489558936208500E-015 ) ) ; +#699 = EDGE_CURVE ( 'NONE', #2200, #930, #193, .T. ) ; +#700 = FACE_OUTER_BOUND ( 'NONE', #239, .T. ) ; +#701 = CIRCLE ( 'NONE', #3988, 5.050800000000001500 ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, -5.000000000000022200, 77.50000000000002800 ) ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.550799999999995300, 15.49999999999998400 ) ) ; +#704 = CIRCLE ( 'NONE', #119, 1.249999999999999800 ) ; +#705 = ADVANCED_FACE ( 'NONE', ( #1992 ), #1603, .F. ) ; +#706 = AXIS2_PLACEMENT_3D ( 'NONE', #1586, #4021, #1942 ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -25.00000000000000700, 60.00000000000001400 ) ) ; +#708 = LINE ( 'NONE', #364, #1393 ) ; +#709 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.550799999999994400, 67.00000000000002800 ) ) ; +#710 = EDGE_LOOP ( 'NONE', ( #484, #4113, #582, #1483 ) ) ; +#711 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -20.00000000000001100, 60.00000000000001400 ) ) ; +#712 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#713 = CIRCLE ( 'NONE', #2614, 1.200000000000006600 ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999978700, 77.50000000000002800 ) ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.250000000000000900, 80.00000000000002800 ) ) ; +#716 = ORIENTED_EDGE ( 'NONE', *, *, #1806, .F. ) ; +#717 = ORIENTED_EDGE ( 'NONE', *, *, #411, .T. ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.550799999999999700, 22.10328947826993600 ) ) ; +#719 = VERTEX_POINT ( 'NONE', #4178 ) ; +#720 = EDGE_CURVE ( 'NONE', #290, #2483, #1893, .T. ) ; +#721 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#722 = VERTEX_POINT ( 'NONE', #77 ) ; +#723 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 25.00000000000000400, 40.00000000000002800 ) ) ; +#724 = ORIENTED_EDGE ( 'NONE', *, *, #2551, .T. ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.50000000000000400, 24.99999999999999600 ) ) ; +#726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.178938284644431100E-016 ) ) ; +#727 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -5.000000000000020400, 75.00000000000002800 ) ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 22.99770416297590000, 24.27963556610815800 ) ) ; +#729 = VERTEX_POINT ( 'NONE', #2806 ) ; +#730 = CARTESIAN_POINT ( 'NONE', ( 27.78854746928309200, 3.678956949244748900, 77.48431997868469500 ) ) ; +#731 = EDGE_CURVE ( 'NONE', #4370, #3377, #2701, .T. ) ; +#732 = CARTESIAN_POINT ( 'NONE', ( -6.938893903907228400E-014, 2.499999999999993800, 77.50000000000002800 ) ) ; +#733 = EDGE_LOOP ( 'NONE', ( #3267, #3286, #3326, #3420 ) ) ; +#734 = ADVANCED_FACE ( 'NONE', ( #982 ), #4403, .T. ) ; +#735 = VERTEX_POINT ( 'NONE', #2142 ) ; +#736 = ORIENTED_EDGE ( 'NONE', *, *, #699, .T. ) ; +#737 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -15.00000000000000200, 68.75000000000002800 ) ) ; +#738 = ORIENTED_EDGE ( 'NONE', *, *, #2396, .F. ) ; +#739 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#740 = ORIENTED_EDGE ( 'NONE', *, *, #3330, .T. ) ; +#741 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#742 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#743 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.749999999999972900, 75.00000000000002800 ) ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 19.91498057164529500, 36.34312587963330500 ) ) ; +#745 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 20.00000000000000000, 40.00000000000002800 ) ) ; +#746 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#747 = LINE ( 'NONE', #1827, #3295 ) ; +#748 = DATE_AND_TIME ( #1639, #2589 ) ; +#749 = AXIS2_PLACEMENT_3D ( 'NONE', #941, #3360, #1270 ) ; +#750 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247281900, 0.01275685208050858500, 76.09432346314798700 ) ) ; +#751 = CIRCLE ( 'NONE', #3500, 1.249999999999992500 ) ; +#752 = CIRCLE ( 'NONE', #2000, 1.250000000000003800 ) ; +#753 = CARTESIAN_POINT ( 'NONE', ( 29.74776692697528100, 4.987243147919484100, 76.09432346314797300 ) ) ; +#754 = ADVANCED_FACE ( 'NONE', ( #2817 ), #2825, .F. ) ; +#755 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.32382484426029000, 30.94326542852602200 ) ) ; +#756 = CYLINDRICAL_SURFACE ( 'NONE', #236, 5.050799999999994400 ) ; +#757 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#758 = CYLINDRICAL_SURFACE ( 'NONE', #4034, 0.5000000000000004400 ) ; +#759 = AXIS2_PLACEMENT_3D ( 'NONE', #561, #2975, #900 ) ; +#760 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#761 = CARTESIAN_POINT ( 'NONE', ( 0.7559009375181616800, 4.886996285270899200, 76.79912110019958500 ) ) ; +#762 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#763 = ADVANCED_FACE ( 'NONE', ( #79 ), #4196, .T. ) ; +#764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.602085213965210100E-016 ) ) ; +#765 = LINE ( 'NONE', #4046, #3409 ) ; +#766 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 9.999999999999994700, 80.00000000000002800 ) ) ; +#767 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#768 = AXIS2_PLACEMENT_3D ( 'NONE', #2265, #2977, #904 ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -4.991006225469872600, 16.15537812313072400 ) ) ; +#770 = FACE_OUTER_BOUND ( 'NONE', #3319, .T. ) ; +#771 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#772 = CIRCLE ( 'NONE', #1788, 5.000000000000000000 ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996400, 1.250000000000020900, 77.50000000000002800 ) ) ; +#774 = ORIENTED_EDGE ( 'NONE', *, *, #1736, .F. ) ; +#775 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 21.84171778452697100, 20.50719136636828600 ) ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( 29.74776692697528100, 4.987243147919484100, 76.09432346314797300 ) ) ; +#777 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#778 = FACE_OUTER_BOUND ( 'NONE', #3977, .T. ) ; +#779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#780 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#781 = VERTEX_POINT ( 'NONE', #1343 ) ; +#782 = AXIS2_PLACEMENT_3D ( 'NONE', #2636, #581, #2995 ) ; +#783 = AXIS2_PLACEMENT_3D ( 'NONE', #3196, #2138, #3550 ) ; +#784 = ADVANCED_FACE ( 'NONE', ( #3536 ), #2605, .T. ) ; +#785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#786 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -13.00000000000000200, -2.211772431870428700E-015 ) ) ; +#787 = ORIENTED_EDGE ( 'NONE', *, *, #2560, .T. ) ; +#788 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#789 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.250000000000000000, 77.50000000000002800 ) ) ; +#790 = ORIENTED_EDGE ( 'NONE', *, *, #690, .T. ) ; +#791 = ADVANCED_FACE ( 'NONE', ( #1770 ), #3414, .T. ) ; +#792 = ORIENTED_EDGE ( 'NONE', *, *, #4402, .F. ) ; +#793 = EDGE_CURVE ( 'NONE', #4369, #3416, #4312, .T. ) ; +#794 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #750, #66, #3870, #1767, #4184, #2130, #85, #2480, #424, #2837 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 1.243956635201626300E-019, 0.0004592101670904992000, 0.0009184203341809982800, 0.001377630501271497500, 0.001836840668361996600 ), + .UNSPECIFIED. ) ; +#795 = VERTEX_POINT ( 'NONE', #3800 ) ; +#796 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 19.44194693047587200, 14.82416756841219800 ) ) ; +#797 = CARTESIAN_POINT ( 'NONE', ( 29.86748372484143800, 4.929204632268138700, 75.81484106229356700 ) ) ; +#798 = ORIENTED_EDGE ( 'NONE', *, *, #731, .F. ) ; +#799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#800 = EDGE_LOOP ( 'NONE', ( #2444, #2495, #2526, #2577 ) ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 19.99999999999999600, 69.95000000000001700 ) ) ; +#802 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#803 = ORIENTED_EDGE ( 'NONE', *, *, #2607, .T. ) ; +#804 = ORIENTED_EDGE ( 'NONE', *, *, #2337, .F. ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247281900, 0.01275685208050858500, 76.09432346314798700 ) ) ; +#806 = CARTESIAN_POINT ( 'NONE', ( 29.10505236643030400, 22.85629932562237700, 67.31466080946438500 ) ) ; +#807 = ORIENTED_EDGE ( 'NONE', *, *, #640, .F. ) ; +#808 = AXIS2_PLACEMENT_3D ( 'NONE', #1930, #4332, #2278 ) ; +#809 = ORIENTED_EDGE ( 'NONE', *, *, #3308, .T. ) ; +#810 = ADVANCED_FACE ( 'NONE', ( #1560 ), #4206, .T. ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 12.63983982614030700, 13.12855283386209800 ) ) ; +#812 = AXIS2_PLACEMENT_3D ( 'NONE', #2333, #280, #2682 ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.710505431213761500E-015, 5.000000000000000000 ) ) ; +#814 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -5.000000000000022200, 75.00000000000002800 ) ) ; +#815 = LINE ( 'NONE', #4216, #3447 ) ; +#816 = LINE ( 'NONE', #63, #4342 ) ; +#817 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#818 = VECTOR ( 'NONE', #3741, 1000.000000000000000 ) ; +#819 = VECTOR ( 'NONE', #3753, 1000.000000000000000 ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 6.907677829619813400, 7.251838159137598400 ) ) ; +#821 = EDGE_CURVE ( 'NONE', #3943, #2450, #652, .T. ) ; +#822 = CARTESIAN_POINT ( 'NONE', ( 29.60475507574566500, 21.97494331747508800, 71.28819226924154900 ) ) ; +#823 = VECTOR ( 'NONE', #398, 1000.000000000000000 ) ; +#824 = VECTOR ( 'NONE', #4347, 1000.000000000000000 ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( 27.51844889839643200, 2.150443178084210100, 77.50019388298295600 ) ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 12.85854786489926100, 5.688382850550140400 ) ) ; +#827 = EDGE_CURVE ( 'NONE', #4016, #3929, #2492, .T. ) ; +#828 = CIRCLE ( 'NONE', #82, 1.250000000000001100 ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.49999999999999500, 43.69999999999999600 ) ) ; +#830 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.749999999999972900, 77.50000000000002800 ) ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( 0.8295550290814642800, 22.76138263207908700, 67.13998014917878300 ) ) ; +#832 = ADVANCED_FACE ( 'NONE', ( #1655 ), #564, .T. ) ; +#833 = CYLINDRICAL_SURFACE ( 'NONE', #1413, 2.500000000000002200 ) ; +#834 = EDGE_LOOP ( 'NONE', ( #4313, #3807, #1746, #3006 ) ) ; +#835 = AXIS2_PLACEMENT_3D ( 'NONE', #865, #507, #3281 ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( -6.938893903907228400E-014, 2.499999999999993800, 78.75000000000002800 ) ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 17.11907720551480900, 22.15261407435958700 ) ) ; +#838 = CIRCLE ( 'NONE', #2530, 3.189999999999998600 ) ; +#839 = VERTEX_POINT ( 'NONE', #715 ) ; +#840 = ORIENTED_EDGE ( 'NONE', *, *, #1282, .F. ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( 29.57760357194297600, 0.03351677280482971000, 76.40133273722266000 ) ) ; +#842 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 9.709165031362267900, 3.102268190778135500 ) ) ; +#843 = ORIENTED_EDGE ( 'NONE', *, *, #2311, .T. ) ; +#844 = ORIENTED_EDGE ( 'NONE', *, *, #2758, .T. ) ; +#845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#846 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#847 = ORIENTED_EDGE ( 'NONE', *, *, #2655, .T. ) ; +#848 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #576, #3691, #2292 ), + ( #244, #2646, #588 ), + ( #3003, #929, #3348 ), + ( #1261, #3703, #1602 ), + ( #4033, #1957, #4356 ), + ( #2305, #259, #2659 ), + ( #599, #3018, #944 ), + ( #3364, #1271, #3717 ), + ( #1614, #4042, #1970 ), + ( #4368, #2318, #269 ), + ( #2674, #612, #3031 ), + ( #960, #3379, #1286 ), + ( #3729, #1629, #4052 ), + ( #1983, #4381, #2335 ), + ( #282, #2684, #625 ), + ( #3043, #974, #3394 ), + ( #1299, #3742, #1641 ), + ( #4064, #1997, #4396 ), + ( #2348, #296, #3125 ), + ( #1053, #3479, #1385 ), + ( #3830, #1727, #4140 ), + ( #2083, #44, #2436 ), + ( #385, #2786, #728 ), + ( #3143, #1067, #3496 ), + ( #1405, #3847, #1739 ), + ( #4158, #2100, #58 ), + ( #2455, #401, #2805 ), + ( #744, #3163, #1085 ), + ( #3515, #1423, #3862 ), + ( #1758, #4177, #2120 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 8.673617379884035500E-019, 0.002745315124779301800, 0.004117972687168952100, 0.005490630249558602800, 0.008235945374337902400, 0.009608602936727554000, 0.01098126049911720400, 0.01372657562389650500, 0.01647189074867580500, 0.02196252099823440800, 0.02745315124779301000, 0.03019846637257231000, 0.03294378149735161000, 0.03843441174691021600, 0.04392504199646881500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#849 = EDGE_CURVE ( 'NONE', #1954, #3416, #1458, .T. ) ; +#850 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#851 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#852 = ORIENTED_EDGE ( 'NONE', *, *, #925, .T. ) ; +#853 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#854 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ; +#855 = EDGE_CURVE ( 'NONE', #3052, #2665, #772, .T. ) ; +#856 = ORIENTED_EDGE ( 'NONE', *, *, #855, .F. ) ; +#857 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 3.183809393324537900, 5.468878040124630000 ) ) ; +#858 = EDGE_LOOP ( 'NONE', ( #4292, #4315, #4323, #4331, #1789 ) ) ; +#859 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#860 = ORIENTED_EDGE ( 'NONE', *, *, #1058, .F. ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 29.33012701892219100, -10.50000000000000000, 2.500000000000000000 ) ) ; +#862 = EDGE_CURVE ( 'NONE', #3052, #3553, #1955, .T. ) ; +#863 = EDGE_LOOP ( 'NONE', ( #667, #1785 ) ) ; +#864 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#865 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 68.75000000000002800 ) ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499999999999996900, 15.49999999999998600 ) ) ; +#867 = AXIS2_PLACEMENT_3D ( 'NONE', #216, #2618, #565 ) ; +#868 = TOROIDAL_SURFACE ( 'NONE', #4138, 1.250000000000000000, 1.250000000000000000 ) ; +#869 = PERSON_AND_ORGANIZATION ( #1892, #3247 ) ; +#870 = CARTESIAN_POINT ( 'NONE', ( 1.145213051021695100, 0.2721830192718511200, 77.10676345234504900 ) ) ; +#871 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.6814905577072805100, 3.187450021109432800E-010 ) ) ; +#872 = FACE_OUTER_BOUND ( 'NONE', #255, .T. ) ; +#873 = FACE_OUTER_BOUND ( 'NONE', #94, .T. ) ; +#874 = AXIS2_PLACEMENT_3D ( 'NONE', #431, #777, #2488 ) ; +#875 = AXIS2_PLACEMENT_3D ( 'NONE', #711, #3129, #1055 ) ; +#876 = ORIENTED_EDGE ( 'NONE', *, *, #3467, .F. ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( 25.50248137225109300, -12.64508088111016100, 0.02428706387032450100 ) ) ; +#878 = VECTOR ( 'NONE', #4421, 1000.000000000000000 ) ; +#879 = LINE ( 'NONE', #718, #2597 ) ; +#880 = CYLINDRICAL_SURFACE ( 'NONE', #1089, 1.199999999999999700 ) ; +#881 = EDGE_CURVE ( 'NONE', #1790, #2067, #2370, .T. ) ; +#882 = LINE ( 'NONE', #4282, #2486 ) ; +#883 = ORIENTED_EDGE ( 'NONE', *, *, #2678, .T. ) ; +#884 = EDGE_CURVE ( 'NONE', #2954, #722, #4092, .T. ) ; +#885 = VECTOR ( 'NONE', #3449, 1000.000000000000000 ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -25.00000000000001100, 72.50000000000001400 ) ) ; +#887 = EDGE_LOOP ( 'NONE', ( #2121, #4059, #620, #1320, #34, #3426, #4165, #422, #3040, #3701 ) ) ; +#888 = ORIENTED_EDGE ( 'NONE', *, *, #2992, .F. ) ; +#889 = ORIENTED_EDGE ( 'NONE', *, *, #1058, .T. ) ; +#890 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -22.50000000000000000, 10.00000000000000700 ) ) ; +#891 = VERTEX_POINT ( 'NONE', #3980 ) ; +#892 = AXIS2_PLACEMENT_3D ( 'NONE', #3728, #1627, #611 ) ; +#893 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#894 = VERTEX_POINT ( 'NONE', #2489 ) ; +#895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#896 = ORIENTED_EDGE ( 'NONE', *, *, #3635, .F. ) ; +#897 = ORIENTED_EDGE ( 'NONE', *, *, #3724, .F. ) ; +#898 = EDGE_CURVE ( 'NONE', #316, #3052, #3206, .T. ) ; +#899 = ORIENTED_EDGE ( 'NONE', *, *, #3121, .T. ) ; +#900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884036700E-017 ) ) ; +#901 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.991006225469872600, 16.15537812313072400 ) ) ; +#903 = ORIENTED_EDGE ( 'NONE', *, *, #1926, .F. ) ; +#904 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#905 = ORIENTED_EDGE ( 'NONE', *, *, #4122, .T. ) ; +#906 = EDGE_CURVE ( 'NONE', #2760, #2675, #3311, .T. ) ; +#907 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#908 = VERTEX_POINT ( 'NONE', #886 ) ; +#909 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #2578, #525 ) ; +#910 = VECTOR ( 'NONE', #1782, 1000.000000000000000 ) ; +#911 = FACE_OUTER_BOUND ( 'NONE', #3665, .T. ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999995700, 3.749999999999996900, 77.50000000000002800 ) ) ; +#913 = ORIENTED_EDGE ( 'NONE', *, *, #4218, .T. ) ; +#914 = LINE ( 'NONE', #2672, #1820 ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( 8.699999999999999300, -22.90000000000000200, 35.00000000000000000 ) ) ; +#916 = LINE ( 'NONE', #291, #2642 ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 71.94000000000002600 ) ) ; +#918 = CC_DESIGN_APPROVAL ( #682, ( #472 ) ) ; +#919 = CARTESIAN_POINT ( 'NONE', ( 0.8281732248665384400, 22.75929052279956700, 70.36355052529630400 ) ) ; +#920 = VECTOR ( 'NONE', #1384, 1000.000000000000000 ) ; +#921 = AXIS2_PLACEMENT_3D ( 'NONE', #3996, #1913, #4317 ) ; +#922 = VECTOR ( 'NONE', #2994, 1000.000000000000000 ) ; +#923 = EDGE_CURVE ( 'NONE', #445, #3108, #3090, .T. ) ; +#924 = LINE ( 'NONE', #1799, #9 ) ; +#925 = EDGE_CURVE ( 'NONE', #1094, #3144, #4006, .T. ) ; +#926 = LINE ( 'NONE', #890, #1833 ) ; +#927 = AXIS2_PLACEMENT_3D ( 'NONE', #1350, #3788, #1688 ) ; +#928 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -14.99999999999998000, 68.75000000000002800 ) ) ; +#929 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.701411588857618500, 0.1807528723868650500 ) ) ; +#930 = VERTEX_POINT ( 'NONE', #4134 ) ; +#931 = CARTESIAN_POINT ( 'NONE', ( 0.07608053672175783800, 4.828893528871457600, 75.61591454212171500 ) ) ; +#932 = VECTOR ( 'NONE', #2835, 1000.000000000000000 ) ; +#933 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#934 = EDGE_LOOP ( 'NONE', ( #2615, #2654, #2669, #2706 ) ) ; +#935 = EDGE_CURVE ( 'NONE', #894, #1093, #333, .T. ) ; +#936 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#937 = ORIENTED_EDGE ( 'NONE', *, *, #3110, .F. ) ; +#938 = ORIENTED_EDGE ( 'NONE', *, *, #606, .T. ) ; +#939 = ORIENTED_EDGE ( 'NONE', *, *, #2169, .T. ) ; +#940 = AXIS2_PLACEMENT_3D ( 'NONE', #1521, #3958, #1868 ) ; +#941 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.749999999999972900, 77.50000000000002800 ) ) ; +#942 = VERTEX_POINT ( 'NONE', #378 ) ; +#943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 7.017477517731074400, 1.596934447753334000 ) ) ; +#945 = FACE_OUTER_BOUND ( 'NONE', #3285, .T. ) ; +#946 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999973400, 75.00000000000002800 ) ) ; +#947 = AXIS2_PLACEMENT_3D ( 'NONE', #1857, #4271, #2210 ) ; +#948 = AXIS2_PLACEMENT_3D ( 'NONE', #1640, #3058, #986 ) ; +#949 = ORIENTED_EDGE ( 'NONE', *, *, #2695, .T. ) ; +#950 = CARTESIAN_POINT ( 'NONE', ( 1.391064788927596000, -10.68820210227143100, 1.531609464454671400 ) ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 9.999999999999994700, 77.50000000000002800 ) ) ; +#952 = VERTEX_POINT ( 'NONE', #36 ) ; +#953 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9961946980917455500, -0.08715574274765829100 ) ) ; +#954 = ORIENTED_EDGE ( 'NONE', *, *, #1651, .T. ) ; +#955 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.602085213965210600E-016, -1.000000000000000000 ) ) ; +#956 = ORIENTED_EDGE ( 'NONE', *, *, #2962, .F. ) ; +#957 = EDGE_CURVE ( 'NONE', #4411, #3375, #1242, .T. ) ; +#958 = EDGE_LOOP ( 'NONE', ( #191, #241, #253, #584, #624, #716 ) ) ; +#959 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#960 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 9.049970703832627800, 8.971871860139312800 ) ) ; +#961 = EDGE_CURVE ( 'NONE', #1735, #3227, #2987, .T. ) ; +#962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.982541115402065100E-016, -1.000000000000000000 ) ) ; +#963 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -25.00000000000000700, 55.50000000000000700 ) ) ; +#964 = FACE_OUTER_BOUND ( 'NONE', #114, .T. ) ; +#965 = PERSON_AND_ORGANIZATION ( #1892, #3247 ) ; +#966 = AXIS2_PLACEMENT_3D ( 'NONE', #836, #2889, #1174 ) ; +#967 = VECTOR ( 'NONE', #3041, 1000.000000000000000 ) ; +#968 = FACE_OUTER_BOUND ( 'NONE', #1498, .T. ) ; +#969 = ORIENTED_EDGE ( 'NONE', *, *, #4070, .F. ) ; +#970 = AXIS2_PLACEMENT_3D ( 'NONE', #3450, #3411, #3803 ) ; +#971 = VECTOR ( 'NONE', #2702, 1000.000000000000000 ) ; +#972 = LINE ( 'NONE', #359, #4394 ) ; +#973 = AXIS2_PLACEMENT_3D ( 'NONE', #4211, #1572, #4007 ) ; +#974 = CARTESIAN_POINT ( 'NONE', ( -7.914116019820592200E-013, 16.11493030519447300, 9.388172172271518800 ) ) ; +#975 = CYLINDRICAL_SURFACE ( 'NONE', #627, 1.200000000000006600 ) ; +#976 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -25.00000000000000700, 60.00000000000001400 ) ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.550799999999994400, 67.00000000000002800 ) ) ; +#978 = VECTOR ( 'NONE', #4235, 1000.000000000000000 ) ; +#979 = EDGE_CURVE ( 'NONE', #105, #1158, #454, .T. ) ; +#980 = ADVANCED_FACE ( 'NONE', ( #1941 ), #137, .F. ) ; +#981 = ORIENTED_EDGE ( 'NONE', *, *, #3772, .F. ) ; +#982 = FACE_OUTER_BOUND ( 'NONE', #958, .T. ) ; +#983 = ORIENTED_EDGE ( 'NONE', *, *, #3305, .T. ) ; +#984 = EDGE_CURVE ( 'NONE', #2581, #1584, #237, .T. ) ; +#985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#987 = VERTEX_POINT ( 'NONE', #1415 ) ; +#988 = VERTEX_POINT ( 'NONE', #753 ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.90000000000000200, 38.19000000000000500 ) ) ; +#990 = AXIS2_PLACEMENT_3D ( 'NONE', #2920, #850, #3263 ) ; +#991 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#992 = ORIENTED_EDGE ( 'NONE', *, *, #2713, .F. ) ; +#993 = ORIENTED_EDGE ( 'NONE', *, *, #2731, .F. ) ; +#994 = VERTEX_POINT ( 'NONE', #68 ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.50000000000000000, 1.040834085586085200E-015 ) ) ; +#996 = EDGE_LOOP ( 'NONE', ( #4238, #4148, #403, #536 ) ) ; +#997 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#998 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996400, 3.749999999999993800, 78.75000000000002800 ) ) ; +#999 = ORIENTED_EDGE ( 'NONE', *, *, #1575, .F. ) ; +#1000 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Body', ( #40, #4430 ), #3323 ) ; +#1001 = EDGE_LOOP ( 'NONE', ( #2284, #2517, #1472, #4222 ) ) ; +#1002 = AXIS2_PLACEMENT_3D ( 'NONE', #1738, #742, #3161 ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884032500E-016, 19.32049555237436100, 30.91930241448508100 ) ) ; +#1004 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781446500E-015, 0.0000000000000000000 ) ) ; +#1005 = ORIENTED_EDGE ( 'NONE', *, *, #1157, .F. ) ; +#1006 = ORIENTED_EDGE ( 'NONE', *, *, #1975, .F. ) ; +#1007 = EDGE_CURVE ( 'NONE', #2438, #1158, #1028, .T. ) ; +#1008 = AXIS2_PLACEMENT_3D ( 'NONE', #1380, #1725, #4135 ) ; +#1009 = ORIENTED_EDGE ( 'NONE', *, *, #1338, .T. ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 65.56000000000003100 ) ) ; +#1011 = VECTOR ( 'NONE', #2828, 1000.000000000000000 ) ; +#1012 = LINE ( 'NONE', #714, #2867 ) ; +#1013 = EDGE_CURVE ( 'NONE', #3108, #661, #2042, .T. ) ; +#1014 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884037400E-016, 9.383931264854066300, 9.285397915613101500 ) ) ; +#1015 = ORIENTED_EDGE ( 'NONE', *, *, #3169, .T. ) ; +#1016 = FACE_OUTER_BOUND ( 'NONE', #2961, .T. ) ; +#1017 = CIRCLE ( 'NONE', #1863, 1.250000000000000000 ) ; +#1018 = ADVANCED_FACE ( 'NONE', ( #2749 ), #3653, .F. ) ; +#1019 = AXIS2_PLACEMENT_3D ( 'NONE', #2195, #149, #2547 ) ; +#1020 = FACE_OUTER_BOUND ( 'NONE', #626, .T. ) ; +#1021 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 25.00100000000000800, 60.00000000000002100 ) ) ; +#1022 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1023 = LINE ( 'NONE', #814, #133 ) ; +#1024 = AXIS2_PLACEMENT_3D ( 'NONE', #2346, #3406, #1284 ) ; +#1025 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1026 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000005800, 67.00000000000002800 ) ) ; +#1027 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1028 = LINE ( 'NONE', #2112, #3697 ) ; +#1029 = ORIENTED_EDGE ( 'NONE', *, *, #1157, .T. ) ; +#1030 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.301042606982605100E-016 ) ) ; +#1031 = EDGE_CURVE ( 'NONE', #2438, #3346, #926, .T. ) ; +#1032 = LINE ( 'NONE', #1534, #2754 ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.50000000000000400, 7.499999999999996400 ) ) ; +#1034 = EDGE_LOOP ( 'NONE', ( #210, #419, #469, #899, #913 ) ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000006800, 2.499999999999987100, 77.50000000000002800 ) ) ; +#1036 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#1037 = ORIENTED_EDGE ( 'NONE', *, *, #1811, .F. ) ; +#1038 = ORIENTED_EDGE ( 'NONE', *, *, #2758, .F. ) ; +#1039 = DIRECTION ( 'NONE', ( -1.000000000000000000, 5.078135595552289700E-032, -3.903127820947822400E-016 ) ) ; +#1040 = ADVANCED_FACE ( 'NONE', ( #15 ), #833, .T. ) ; +#1041 = ORIENTED_EDGE ( 'NONE', *, *, #2774, .T. ) ; +#1042 = ORIENTED_EDGE ( 'NONE', *, *, #2720, .F. ) ; +#1043 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -22.90000000000000200, 35.00000000000000000 ) ) ; +#1044 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.500000000000005800, 67.00000000000002800 ) ) ; +#1045 = AXIS2_PLACEMENT_3D ( 'NONE', #3594, #1492, #3931 ) ; +#1046 = ORIENTED_EDGE ( 'NONE', *, *, #1532, .F. ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.50000000000000400, 24.99999999999999600 ) ) ; +#1048 = PLANE ( 'NONE', #1008 ) ; +#1049 = EDGE_LOOP ( 'NONE', ( #3917, #3933, #3969, #3981 ) ) ; +#1050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1051 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 71.94000000000002600 ) ) ; +#1052 = ORIENTED_EDGE ( 'NONE', *, *, #2035, .F. ) ; +#1053 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 16.48121611948333200, 20.35381541110992400 ) ) ; +#1054 = ORIENTED_EDGE ( 'NONE', *, *, #2490, .F. ) ; +#1055 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1056 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.499999999999996900, 15.49999999999998600 ) ) ; +#1057 = ORIENTED_EDGE ( 'NONE', *, *, #3290, .F. ) ; +#1058 = EDGE_CURVE ( 'NONE', #719, #43, #2653, .T. ) ; +#1059 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1060 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -20.00000000000001800, 80.00000000000000000 ) ) ; +#1061 = CIRCLE ( 'NONE', #3739, 1.200000000000006600 ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998900, -5.000000000000021300, 77.50000000000002800 ) ) ; +#1063 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1064 = EDGE_CURVE ( 'NONE', #2146, #407, #3599, .T. ) ; +#1065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1067 = CARTESIAN_POINT ( 'NONE', ( -7.926863073244756200E-013, 23.48088963537827200, 26.22909088634388700 ) ) ; +#1068 = VECTOR ( 'NONE', #3851, 1000.000000000000000 ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 27.59111516400394100, 3.191167028061915100, 77.49860324879848900 ) ) ; +#1070 = CIRCLE ( 'NONE', #3965, 1.250000000000001100 ) ; +#1071 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765827700 ) ) ; +#1072 = EDGE_CURVE ( 'NONE', #207, #574, #1708, .T. ) ; +#1073 = VECTOR ( 'NONE', #1987, 1000.000000000000000 ) ; +#1074 = CIRCLE ( 'NONE', #2115, 5.000000000000000000 ) ; +#1075 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1076 = CIRCLE ( 'NONE', #263, 5.050799999999998000 ) ; +#1077 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1078 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 68.75000000000002800 ) ) ; +#1079 = AXIS2_PLACEMENT_3D ( 'NONE', #2512, #458, #2874 ) ; +#1080 = DIRECTION ( 'NONE', ( -1.734723475976805900E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1082 = LINE ( 'NONE', #4219, #2812 ) ; +#1083 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999996400, 2.428612866367522000E-014, 77.50000000000002800 ) ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( 2.481551101603557600, 2.849556821915781900, 77.50019388298295600 ) ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.90785664169587600, 36.03322735706720400 ) ) ; +#1086 = VERTEX_POINT ( 'NONE', #3676 ) ; +#1087 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1088 = AXIS2_PLACEMENT_3D ( 'NONE', #1776, #1796, #92 ) ; +#1089 = AXIS2_PLACEMENT_3D ( 'NONE', #2652, #3696, #3010 ) ; +#1090 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#1091 = ADVANCED_FACE ( 'NONE', ( #3465 ), #4266, .F. ) ; +#1092 = FACE_OUTER_BOUND ( 'NONE', #4284, .T. ) ; +#1093 = VERTEX_POINT ( 'NONE', #2986 ) ; +#1094 = VERTEX_POINT ( 'NONE', #912 ) ; +#1095 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.301042606982605100E-016 ) ) ; +#1096 = ADVANCED_FACE ( 'NONE', ( #2425 ), #3331, .F. ) ; +#1097 = ORIENTED_EDGE ( 'NONE', *, *, #2782, .T. ) ; +#1098 = EDGE_CURVE ( 'NONE', #407, #1348, #3362, .T. ) ; +#1099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.347358039593635500E-016 ) ) ; +#1100 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 24.26528369091088400, 30.16223170880275000 ) ) ; +#1101 = ORIENTED_EDGE ( 'NONE', *, *, #1360, .F. ) ; +#1102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( 0.4223964280569450500, 4.966483227195153600, 76.40133273722250400 ) ) ; +#1104 = VERTEX_POINT ( 'NONE', #4 ) ; +#1105 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.550800000000000600, 21.18695830425251000 ) ) ; +#1106 = ORIENTED_EDGE ( 'NONE', *, *, #2984, .T. ) ; +#1107 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 0.0000000000000000000, 1.604619215278546600E-014 ) ) ; +#1108 = ORIENTED_EDGE ( 'NONE', *, *, #3367, .T. ) ; +#1109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1110 = ORIENTED_EDGE ( 'NONE', *, *, #390, .T. ) ; +#1111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1112 = AXIS2_PLACEMENT_3D ( 'NONE', #1737, #1402, #3844 ) ; +#1113 = ORIENTED_EDGE ( 'NONE', *, *, #562, .T. ) ; +#1114 = ADVANCED_FACE ( 'NONE', ( #2886 ), #4137, .F. ) ; +#1115 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999978700, 77.50000000000002800 ) ) ; +#1116 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 16.47827936836289800, 20.42927200082966600 ) ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( 30.00045493925137000, 0.9437349899463989300, 75.02834858604769900 ) ) ; +#1118 = VERTEX_POINT ( 'NONE', #3458 ) ; +#1119 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1120 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9961946980917455500, -0.08715574274765829100 ) ) ; +#1121 = ADVANCED_FACE ( 'NONE', ( #3261 ), #2316, .F. ) ; +#1122 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1123 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -25.00000000000001100, 72.00000000000001400 ) ) ; +#1124 = CIRCLE ( 'NONE', #1137, 1.200000000000006600 ) ; +#1125 = ORIENTED_EDGE ( 'NONE', *, *, #192, .F. ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 68.75000000000000000 ) ) ; +#1127 = EDGE_CURVE ( 'NONE', #580, #1624, #1513, .T. ) ; +#1128 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999994300, 20.21740381874204600, 65.56000000000003100 ) ) ; +#1129 = LINE ( 'NONE', #2809, #2028 ) ; +#1130 = FACE_OUTER_BOUND ( 'NONE', #1364, .T. ) ; +#1131 = ORIENTED_EDGE ( 'NONE', *, *, #3772, .T. ) ; +#1132 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 18.69908502210653700, 13.44345676812836700 ) ) ; +#1133 = FACE_BOUND ( 'NONE', #4183, .T. ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.00000000000000200, 8.239936510889842600E-016 ) ) ; +#1135 = VECTOR ( 'NONE', #853, 1000.000000000000000 ) ; +#1136 = EDGE_CURVE ( 'NONE', #1348, #212, #708, .T. ) ; +#1137 = AXIS2_PLACEMENT_3D ( 'NONE', #3680, #1578, #4011 ) ; +#1138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.50000000000000000, 5.000000000000000900 ) ) ; +#1139 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1140 = FACE_BOUND ( 'NONE', #2219, .T. ) ; +#1141 = ADVANCED_FACE ( 'NONE', ( #4047 ), #2217, .F. ) ; +#1142 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1477 ) ; +#1143 = VERTEX_POINT ( 'NONE', #4136 ) ; +#1144 = AXIS2_PLACEMENT_3D ( 'NONE', #1445, #3887, #1784 ) ; +#1145 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 4.091333628186428800E-015, 5.000000000000000000 ) ) ; +#1146 = LINE ( 'NONE', #3214, #2882 ) ; +#1147 = CARTESIAN_POINT ( 'NONE', ( 28.93794969690668500, 23.08148629465293000, 67.89825192649372800 ) ) ; +#1148 = VECTOR ( 'NONE', #52, 1000.000000000000000 ) ; +#1149 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1150 = EDGE_LOOP ( 'NONE', ( #2519, #3302, #1620, #3159 ) ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 16.75255062782213500, 10.28120998309954700 ) ) ; +#1152 = LINE ( 'NONE', #2969, #4212 ) ; +#1153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1154 = EDGE_LOOP ( 'NONE', ( #622, #3384 ) ) ; +#1155 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #965, #817, ( #472 ) ) ; +#1156 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1157 = EDGE_CURVE ( 'NONE', #2624, #195, #512, .T. ) ; +#1158 = VERTEX_POINT ( 'NONE', #383 ) ; +#1159 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 9.071669523048598200, 8.972407484888941900 ) ) ; +#1160 = VERTEX_POINT ( 'NONE', #2433 ) ; +#1161 = CARTESIAN_POINT ( 'NONE', ( 29.89152993497294000, 21.05504500097363200, 71.76786025884116800 ) ) ; +#1162 = EDGE_LOOP ( 'NONE', ( #1005, #1042 ) ) ; +#1163 = EDGE_CURVE ( 'NONE', #4425, #2291, #391, .T. ) ; +#1164 = ADVANCED_FACE ( 'NONE', ( #605 ), #2097, .F. ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( 27.64578172483172100, 1.640918502064864000, 77.49676248852495100 ) ) ; +#1166 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 9.060652049916903600, 8.981605817463936600 ) ) ; +#1167 = CARTESIAN_POINT ( 'NONE', ( 0.1651796656625146900, 4.996071295048810000, 76.14100086755222200 ) ) ; +#1168 = VERTEX_POINT ( 'NONE', #575 ) ; +#1169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1170 = ORIENTED_EDGE ( 'NONE', *, *, #2947, .T. ) ; +#1171 = EDGE_CURVE ( 'NONE', #4280, #490, #3036, .T. ) ; +#1172 = CARTESIAN_POINT ( 'NONE', ( 0.6143392579084725500, 22.40666209904681600, 66.64625148443764100 ) ) ; +#1173 = VERTEX_POINT ( 'NONE', #2096 ) ; +#1174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#1175 = ORIENTED_EDGE ( 'NONE', *, *, #3930, .T. ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 18.20957630314746500, 25.63256297823457800 ) ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.550799999999999700, 22.10328947826993600 ) ) ; +#1178 = ORIENTED_EDGE ( 'NONE', *, *, #2814, .T. ) ; +#1179 = AXIS2_PLACEMENT_3D ( 'NONE', #1383, #2064, #3827 ) ; +#1180 = CARTESIAN_POINT ( 'NONE', ( 29.74776692697516700, 0.01275685208050111700, 76.09432346314818600 ) ) ; +#1181 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 8.695373052272223900, 2.450891037108062800 ) ) ; +#1182 = AXIS2_PLACEMENT_3D ( 'NONE', #3562, #153, #2550 ) ; +#1183 = AXIS2_PLACEMENT_3D ( 'NONE', #2564, #508, #2921 ) ; +#1184 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1185 = FACE_OUTER_BOUND ( 'NONE', #4166, .T. ) ; +#1186 = CIRCLE ( 'NONE', #3431, 1.199999999999992600 ) ; +#1187 = VECTOR ( 'NONE', #1710, 1000.000000000000000 ) ; +#1188 = EDGE_CURVE ( 'NONE', #3758, #942, #3140, .T. ) ; +#1189 = VECTOR ( 'NONE', #2324, 1000.000000000000000 ) ; +#1190 = LINE ( 'NONE', #3134, #2932 ) ; +#1191 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 4.628745334132782200, 0.6781238010119504700 ) ) ; +#1192 = EDGE_CURVE ( 'NONE', #2446, #3758, #1283, .T. ) ; +#1193 = VECTOR ( 'NONE', #851, 1000.000000000000000 ) ; +#1194 = CARTESIAN_POINT ( 'NONE', ( 29.06837239850868600, -10.52734872166280600, 2.083545334682852500 ) ) ; +#1195 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -22.90000000000000200, 38.19000000000000500 ) ) ; +#1196 = VECTOR ( 'NONE', #4201, 1000.000000000000000 ) ; +#1197 = ORIENTED_EDGE ( 'NONE', *, *, #1314, .T. ) ; +#1198 = AXIS2_PLACEMENT_3D ( 'NONE', #725, #3139, #1065 ) ; +#1199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1200 = FACE_OUTER_BOUND ( 'NONE', #3061, .T. ) ; +#1201 = AXIS2_PLACEMENT_3D ( 'NONE', #2075, #33, #2426 ) ; +#1202 = VERTEX_POINT ( 'NONE', #2496 ) ; +#1203 = ORIENTED_EDGE ( 'NONE', *, *, #2203, .F. ) ; +#1204 = CARTESIAN_POINT ( 'NONE', ( 1.549273714114447900, 0.5305393276069884100, 77.31604266366446200 ) ) ; +#1205 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 5.496523584977448000E-016, 5.000000000000000900 ) ) ; +#1206 = ORIENTED_EDGE ( 'NONE', *, *, #3905, .T. ) ; +#1207 = CARTESIAN_POINT ( 'NONE', ( 25.20118432656071100, -12.85774114446377500, 0.003035334136195143500 ) ) ; +#1208 = VERTEX_POINT ( 'NONE', #438 ) ; +#1209 = EDGE_CURVE ( 'NONE', #1094, #1676, #2939, .T. ) ; +#1210 = EDGE_LOOP ( 'NONE', ( #1891, #1906 ) ) ; +#1211 = VERTEX_POINT ( 'NONE', #2854 ) ; +#1212 = ORIENTED_EDGE ( 'NONE', *, *, #2879, .T. ) ; +#1213 = EDGE_CURVE ( 'NONE', #1425, #987, #1608, .T. ) ; +#1214 = EDGE_LOOP ( 'NONE', ( #1009, #2228, #3046, #4241, #3733, #320, #876, #1221, #1685, #1750, #2020, #2252, #2634, #2728, #3297, #3403 ) ) ; +#1215 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -20.00000000000000400, 35.00000000000000000 ) ) ; +#1216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#1217 = EDGE_LOOP ( 'NONE', ( #1911, #4069, #2152, #2443, #2579 ) ) ; +#1218 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000006800, 2.499999999999987100, 78.75000000000002800 ) ) ; +#1219 = AXIS2_PLACEMENT_3D ( 'NONE', #2748, #1366, #1707 ) ; +#1220 = LINE ( 'NONE', #4308, #2352 ) ; +#1221 = ORIENTED_EDGE ( 'NONE', *, *, #1625, .T. ) ; +#1222 = CARTESIAN_POINT ( 'NONE', ( -6.938893903907228400E-014, 2.499999999999993800, 77.50000000000002800 ) ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 4.999999999999993800, 77.50000000000002800 ) ) ; +#1224 = LINE ( 'NONE', #2790, #3773 ) ; +#1225 = FACE_OUTER_BOUND ( 'NONE', #199, .T. ) ; +#1226 = AXIS2_PLACEMENT_3D ( 'NONE', #1579, #3642, #1715 ) ; +#1227 = AXIS2_PLACEMENT_3D ( 'NONE', #2118, #3513, #3859 ) ; +#1228 = ORIENTED_EDGE ( 'NONE', *, *, #4352, .T. ) ; +#1229 = FACE_BOUND ( 'NONE', #3921, .T. ) ; +#1230 = VECTOR ( 'NONE', #2922, 1000.000000000000000 ) ; +#1231 = LINE ( 'NONE', #3459, #226 ) ; +#1232 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1233 = EDGE_CURVE ( 'NONE', #908, #641, #1990, .T. ) ; +#1234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1235 = AXIS2_PLACEMENT_3D ( 'NONE', #2213, #167, #2569 ) ; +#1236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1237 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -15.00000000000000200, 69.95000000000004500 ) ) ; +#1238 = FACE_OUTER_BOUND ( 'NONE', #1480, .T. ) ; +#1239 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1240 = EDGE_CURVE ( 'NONE', #4155, #147, #1082, .T. ) ; +#1241 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 19.99999999999999600, 68.75000000000000000 ) ) ; +#1242 = LINE ( 'NONE', #1396, #2270 ) ; +#1243 = ORIENTED_EDGE ( 'NONE', *, *, #862, .T. ) ; +#1244 = LINE ( 'NONE', #1918, #2993 ) ; +#1245 = AXIS2_PLACEMENT_3D ( 'NONE', #349, #691, #3112 ) ; +#1246 = ORIENTED_EDGE ( 'NONE', *, *, #2844, .T. ) ; +#1247 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -22.50000000000000400, 55.50000000000000700 ) ) ; +#1248 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1249 = ORIENTED_EDGE ( 'NONE', *, *, #3802, .T. ) ; +#1250 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 19.99999999999999600, 71.93999999999999800 ) ) ; +#1251 = VERTEX_POINT ( 'NONE', #786 ) ; +#1252 = CARTESIAN_POINT ( 'NONE', ( 1.011836486958434400, 23.01735854050024300, 69.80555287290988500 ) ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.99999999999998900, 80.00000000000002800 ) ) ; +#1254 = ORIENTED_EDGE ( 'NONE', *, *, #2330, .T. ) ; +#1255 = ORIENTED_EDGE ( 'NONE', *, *, #961, .F. ) ; +#1256 = EDGE_CURVE ( 'NONE', #3614, #3756, #279, .T. ) ; +#1257 = VERTEX_POINT ( 'NONE', #3576 ) ; +#1258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1260 = ORIENTED_EDGE ( 'NONE', *, *, #2853, .T. ) ; +#1261 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 3.170976981154426600, 5.464979876109270900 ) ) ; +#1262 = CARTESIAN_POINT ( 'NONE', ( 0.1849183384590627800, 4.969361415111726500, 75.95605736619387500 ) ) ; +#1263 = ORIENTED_EDGE ( 'NONE', *, *, #2546, .F. ) ; +#1264 = EDGE_CURVE ( 'NONE', #3441, #1797, #1889, .T. ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( 4.597864826754207700, -12.71564768161302600, -1.029145030913974900E-016 ) ) ; +#1266 = EDGE_LOOP ( 'NONE', ( #2759, #1037 ) ) ; +#1267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1268 = AXIS2_PLACEMENT_3D ( 'NONE', #1461, #3901, #1803 ) ; +#1269 = FACE_BOUND ( 'NONE', #1210, .T. ) ; +#1270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1271 = CARTESIAN_POINT ( 'NONE', ( -3.964808165602736500E-013, 8.677158152753600400, 2.440710711370586200 ) ) ; +#1272 = VECTOR ( 'NONE', #2407, 1000.000000000000000 ) ; +#1273 = CARTESIAN_POINT ( 'NONE', ( 29.58012288934747100, 4.966931767517043500, 76.39771451534683400 ) ) ; +#1274 = FACE_OUTER_BOUND ( 'NONE', #616, .T. ) ; +#1275 = CARTESIAN_POINT ( 'NONE', ( 0.9316212120524012300, -10.52734746960888200, 2.083554694862400900 ) ) ; +#1276 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1277 = LINE ( 'NONE', #4385, #1073 ) ; +#1278 = FACE_OUTER_BOUND ( 'NONE', #1860, .T. ) ; +#1279 = EDGE_CURVE ( 'NONE', #2446, #407, #73, .T. ) ; +#1280 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.940206225469869300, 20.53158018112177500 ) ) ; +#1281 = LINE ( 'NONE', #2856, #2315 ) ; +#1282 = EDGE_CURVE ( 'NONE', #1348, #1158, #3650, .T. ) ; +#1283 = LINE ( 'NONE', #1247, #3852 ) ; +#1284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.059793774530124900, 10.46841981887819800 ) ) ; +#1286 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 12.43034220533546600, 5.285867664681938500 ) ) ; +#1287 = ORIENTED_EDGE ( 'NONE', *, *, #731, .T. ) ; +#1288 = LINE ( 'NONE', #1420, #395 ) ; +#1289 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1290 = VERTEX_POINT ( 'NONE', #3237 ) ; +#1291 = EDGE_CURVE ( 'NONE', #3758, #2438, #4400, .T. ) ; +#1292 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#1293 = ORIENTED_EDGE ( 'NONE', *, *, #3313, .T. ) ; +#1294 = ORIENTED_EDGE ( 'NONE', *, *, #2915, .T. ) ; +#1295 = ORIENTED_EDGE ( 'NONE', *, *, #192, .T. ) ; +#1296 = AXIS2_PLACEMENT_3D ( 'NONE', #3689, #1908, #3463 ) ; +#1297 = ORIENTED_EDGE ( 'NONE', *, *, #2807, .T. ) ; +#1298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9961946980917455500, -0.08715574274765827700 ) ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.62991304654510400, 13.11415256108477600 ) ) ; +#1300 = ADVANCED_FACE ( 'NONE', ( #2602 ), #2696, .T. ) ; +#1301 = ORIENTED_EDGE ( 'NONE', *, *, #3540, .F. ) ; +#1302 = AXIS2_PLACEMENT_3D ( 'NONE', #2506, #2864, #112 ) ; +#1303 = AXIS2_PLACEMENT_3D ( 'NONE', #1974, #4374, #2326 ) ; +#1304 = VERTEX_POINT ( 'NONE', #1509 ) ; +#1305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1306 = VERTEX_POINT ( 'NONE', #3946 ) ; +#1307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.301042606982605100E-016 ) ) ; +#1308 = VERTEX_POINT ( 'NONE', #1854 ) ; +#1309 = VERTEX_POINT ( 'NONE', #4268 ) ; +#1310 = EDGE_CURVE ( 'NONE', #1143, #1808, #1765, .T. ) ; +#1311 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -20.00000000000000400, 33.80000000000000400 ) ) ; +#1312 = ORIENTED_EDGE ( 'NONE', *, *, #1680, .F. ) ; +#1313 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1314 = EDGE_CURVE ( 'NONE', #2617, #2894, #1652, .T. ) ; +#1315 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 4.091333628186428800E-015, 5.000000000000000000 ) ) ; +#1316 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 0.0000000000000000000, 1.604619215278546600E-014 ) ) ; +#1317 = FACE_OUTER_BOUND ( 'NONE', #858, .T. ) ; +#1318 = DATE_AND_TIME ( #2251, #3183 ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 9.999999999999976900, 75.00000000000002800 ) ) ; +#1320 = ORIENTED_EDGE ( 'NONE', *, *, #2063, .F. ) ; +#1321 = AXIS2_PLACEMENT_3D ( 'NONE', #1927, #2629, #1234 ) ; +#1322 = CYLINDRICAL_SURFACE ( 'NONE', #4383, 1.199999999999999700 ) ; +#1323 = CYLINDRICAL_SURFACE ( 'NONE', #4078, 1.000000000000000900 ) ; +#1324 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1325 = LINE ( 'NONE', #2631, #4082 ) ; +#1326 = VECTOR ( 'NONE', #3203, 1000.000000000000000 ) ; +#1327 = AXIS2_PLACEMENT_3D ( 'NONE', #1285, #3393, #1298 ) ; +#1328 = DIRECTION ( 'NONE', ( -2.498001805406601900E-014, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1329 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#1330 = VECTOR ( 'NONE', #303, 1000.000000000000000 ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 18.60625197648755200, 27.34528313593025200 ) ) ; +#1332 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 25.00000000000002100, 16.56854249492382200 ) ) ; +#1333 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 38.19000000000000500 ) ) ; +#1334 = LINE ( 'NONE', #1438, #450 ) ; +#1335 = EDGE_CURVE ( 'NONE', #1309, #3376, #4307, .T. ) ; +#1336 = VECTOR ( 'NONE', #2773, 1000.000000000000000 ) ; +#1337 = ORIENTED_EDGE ( 'NONE', *, *, #2933, .T. ) ; +#1338 = EDGE_CURVE ( 'NONE', #1991, #670, #882, .T. ) ; +#1339 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.50000000000000400, 7.499999999999996400 ) ) ; +#1340 = AXIS2_PLACEMENT_3D ( 'NONE', #1215, #3657, #1553 ) ; +#1341 = ADVANCED_FACE ( 'NONE', ( #648 ), #3309, .F. ) ; +#1342 = LINE ( 'NONE', #3987, #4010 ) ; +#1343 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.999999999999978700, 77.50000000000002800 ) ) ; +#1344 = ORIENTED_EDGE ( 'NONE', *, *, #1895, .T. ) ; +#1345 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884037400E-016, 8.357880429980468800, 8.366199177514650000 ) ) ; +#1346 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1347 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -10.50000000000000000, 5.000000000000000000 ) ) ; +#1348 = VERTEX_POINT ( 'NONE', #1535 ) ; +#1349 = ORIENTED_EDGE ( 'NONE', *, *, #2663, .T. ) ; +#1350 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 19.99999999999999600, 68.75000000000000000 ) ) ; +#1351 = ORIENTED_EDGE ( 'NONE', *, *, #2248, .T. ) ; +#1352 = ORIENTED_EDGE ( 'NONE', *, *, #4003, .F. ) ; +#1353 = ORIENTED_EDGE ( 'NONE', *, *, #957, .F. ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 19.99999999999999600, 68.75000000000000000 ) ) ; +#1355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1356 = EDGE_LOOP ( 'NONE', ( #3613, #3520, #2554, #2230 ) ) ; +#1357 = VERTEX_POINT ( 'NONE', #3638 ) ; +#1358 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1744, #3234, ( #472 ) ) ; +#1359 = ORIENTED_EDGE ( 'NONE', *, *, #3559, .T. ) ; +#1360 = EDGE_CURVE ( 'NONE', #1290, #3706, #4202, .T. ) ; +#1361 = PLANE ( 'NONE', #3352 ) ; +#1362 = ORIENTED_EDGE ( 'NONE', *, *, #884, .T. ) ; +#1363 = ADVANCED_FACE ( 'NONE', ( #770 ), #1915, .F. ) ; +#1364 = EDGE_LOOP ( 'NONE', ( #856, #1243, #1254, #1287, #1312 ) ) ; +#1365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1366 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1367 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.50000000000000400, 7.499999999999996400 ) ) ; +#1368 = AXIS2_PLACEMENT_3D ( 'NONE', #1763, #2474, #2457 ) ; +#1369 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2099, #3162, #1084, #3514, #1421, #3860, #1757, #4176, #2119, #75, #2467, #417, #2822, #761, #3177, #1103, #3532, #1437 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.276230767729473600E-017, 0.0005216237795876741800, 0.001043247559175335600, 0.001564871338762996600, 0.002086495118350659000, 0.002608118897938321300, 0.003129742677525983300, 0.003651366457113645600, 0.004172990236701308400 ), + .UNSPECIFIED. ) ; +#1370 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1371 = LINE ( 'NONE', #1706, #2204 ) ; +#1372 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.49999999999999500, 42.49999999999999300 ) ) ; +#1373 = EDGE_CURVE ( 'NONE', #2357, #3274, #2368, .T. ) ; +#1374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1376 = CIRCLE ( 'NONE', #4335, 0.5000000000000004400 ) ; +#1377 = VECTOR ( 'NONE', #4115, 1000.000000000000000 ) ; +#1378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1379 = AXIS2_PLACEMENT_3D ( 'NONE', #707, #3124, #1050 ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -20.00000000000000000, -2.602085213965210200E-015 ) ) ; +#1381 = LINE ( 'NONE', #2158, #2211 ) ; +#1382 = CIRCLE ( 'NONE', #2826, 1.249999999999999800 ) ; +#1383 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#1384 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1385 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 21.13456806439239700, 18.51056665329513300 ) ) ; +#1386 = AXIS2_PLACEMENT_3D ( 'NONE', #2222, #177, #2583 ) ; +#1387 = CYLINDRICAL_SURFACE ( 'NONE', #2245, 2.499999999999992900 ) ; +#1388 = AXIS2_PLACEMENT_3D ( 'NONE', #1126, #440, #3560 ) ; +#1389 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.500000000000005800, 67.00000000000002800 ) ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999993500, 20.00000000000001800, 68.75000000000000000 ) ) ; +#1391 = ADVANCED_FACE ( 'NONE', ( #3412 ), #3678, .F. ) ; +#1392 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1393 = VECTOR ( 'NONE', #2765, 1000.000000000000000 ) ; +#1394 = VERTEX_POINT ( 'NONE', #1237 ) ; +#1395 = EDGE_CURVE ( 'NONE', #4022, #569, #1453, .T. ) ; +#1396 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -25.00000000000001100, 72.00000000000001400 ) ) ; +#1397 = VECTOR ( 'NONE', #4014, 1000.000000000000000 ) ; +#1398 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #521, #173, #3622, #2930 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0002967085115973637200 ), + .UNSPECIFIED. ) ; +#1399 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.710505431213761500E-015, 0.0000000000000000000 ) ) ; +#1400 = ORIENTED_EDGE ( 'NONE', *, *, #3070, .F. ) ; +#1401 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.775557561562891400E-016, 1.000000000000000000 ) ) ; +#1402 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.347358039593635500E-016, 1.000000000000000000 ) ) ; +#1404 = ORIENTED_EDGE ( 'NONE', *, *, #3664, .T. ) ; +#1405 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 18.80195263622281800, 28.23653102918225600 ) ) ; +#1406 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000005300, 2.676406080878314800, 77.50000000000001400 ) ) ; +#1407 = ORIENTED_EDGE ( 'NONE', *, *, #2952, .T. ) ; +#1408 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1409 = ORIENTED_EDGE ( 'NONE', *, *, #2663, .F. ) ; +#1410 = VERTEX_POINT ( 'NONE', #3335 ) ; +#1411 = ORIENTED_EDGE ( 'NONE', *, *, #3549, .T. ) ; +#1412 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1413 = AXIS2_PLACEMENT_3D ( 'NONE', #1898, #3995, #3307 ) ; +#1414 = ORIENTED_EDGE ( 'NONE', *, *, #881, .F. ) ; +#1415 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -25.00000000000000700, 61.20000000000001700 ) ) ; +#1416 = ADVANCED_FACE ( 'NONE', ( #4089 ), #848, .T. ) ; +#1417 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1418 = ORIENTED_EDGE ( 'NONE', *, *, #539, .T. ) ; +#1419 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.99999999990769700, 38.16514467163299400 ) ) ; +#1420 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.999999999999978700, 75.00000000000002800 ) ) ; +#1421 = CARTESIAN_POINT ( 'NONE', ( 2.354218275168249900, 3.359081497935142700, 77.49676248852495100 ) ) ; +#1422 = ORIENTED_EDGE ( 'NONE', *, *, #2968, .T. ) ; +#1423 = CARTESIAN_POINT ( 'NONE', ( -7.945095379501944100E-013, 24.99999999991091900, 38.01056079862338800 ) ) ; +#1424 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1425 = VERTEX_POINT ( 'NONE', #3178 ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999300, -1.309716224362489200E-014, 77.50000000000002800 ) ) ; +#1427 = ORIENTED_EDGE ( 'NONE', *, *, #2972, .T. ) ; +#1428 = EDGE_CURVE ( 'NONE', #2575, #2717, #2266, .T. ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 65.56000000000000200 ) ) ; +#1430 = LINE ( 'NONE', #4226, #545 ) ; +#1431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1432 = PERSON_AND_ORGANIZATION ( #1892, #3247 ) ; +#1433 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 23.51823578053490800, 26.28267790101075400 ) ) ; +#1434 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1435 = EDGE_CURVE ( 'NONE', #1735, #3329, #1334, .T. ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.50000000000000400, 24.99999999999999600 ) ) ; +#1437 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247688800, 4.987243147919475200, 76.09432346314807200 ) ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -107.4621125123532700, 79.99999999999998600 ) ) ; +#1439 = VECTOR ( 'NONE', #3118, 1000.000000000000100 ) ; +#1440 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 2.782106867166771700E-015, 5.000000000000000000 ) ) ; +#1441 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 65.56000000000000200 ) ) ; +#1442 = ADVANCED_FACE ( 'NONE', ( #3202, #560, #4004, #3085 ), #2824, .F. ) ; +#1443 = AXIS2_PLACEMENT_3D ( 'NONE', #2976, #901, #3316 ) ; +#1444 = CIRCLE ( 'NONE', #683, 1.200000000000006600 ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999993500, 20.00000000000001800, 68.75000000000000000 ) ) ; +#1446 = CYLINDRICAL_SURFACE ( 'NONE', #262, 1.199999999999999700 ) ; +#1447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1448 = ADVANCED_FACE ( 'NONE', ( #2167 ), #2039, .F. ) ; +#1449 = CIRCLE ( 'NONE', #1543, 5.050799999999994400 ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996100, 3.749999999999993300, 80.00000000000002800 ) ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 21.12864939767147400, 18.58948709041568000 ) ) ; +#1452 = CARTESIAN_POINT ( 'NONE', ( 29.99237459198598900, 0.5241928385061041000, 75.22087482596339200 ) ) ; +#1453 = CIRCLE ( 'NONE', #706, 3.189999999999998600 ) ; +#1454 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 67.54999999999999700 ) ) ; +#1455 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1456 = AXIS2_PLACEMENT_3D ( 'NONE', #2423, #2071, #370 ) ; +#1457 = AXIS2_PLACEMENT_3D ( 'NONE', #4096, #1670, #4361 ) ; +#1458 = CIRCLE ( 'NONE', #1751, 2.499999999999998700 ) ; +#1459 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -20.00000000000000700, 72.00000000000001400 ) ) ; +#1460 = ORIENTED_EDGE ( 'NONE', *, *, #3016, .T. ) ; +#1461 = CARTESIAN_POINT ( 'NONE', ( 31.24999999999995700, 3.749999999999995600, 77.50000000000002800 ) ) ; +#1462 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996100, 4.999999999999993800, 77.50000000000002800 ) ) ; +#1463 = LINE ( 'NONE', #2301, #2273 ) ; +#1464 = VERTEX_POINT ( 'NONE', #1798 ) ; +#1465 = EDGE_CURVE ( 'NONE', #147, #2662, #3909, .T. ) ; +#1466 = ADVANCED_FACE ( 'NONE', ( #2983 ), #3786, .F. ) ; +#1467 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1468 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 14.10110849806668100, 15.46894191857672300 ) ) ; +#1469 = VERTEX_POINT ( 'NONE', #1138 ) ; +#1470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1471 = PLANE ( 'NONE', #332 ) ; +#1472 = ORIENTED_EDGE ( 'NONE', *, *, #2919, .T. ) ; +#1473 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1474 = EDGE_CURVE ( 'NONE', #670, #1202, #1146, .T. ) ; +#1475 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1476 = ORIENTED_EDGE ( 'NONE', *, *, #2625, .F. ) ; +#1477 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1478 = ORIENTED_EDGE ( 'NONE', *, *, #478, .F. ) ; +#1479 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 0.4645100556949540700, 5.000000000000000000 ) ) ; +#1480 = EDGE_LOOP ( 'NONE', ( #954, #3223, #905 ) ) ; +#1481 = CARTESIAN_POINT ( 'NONE', ( 28.85043494411908000, 23.18969448306913600, 68.52938589398519300 ) ) ; +#1482 = AXIS2_PLACEMENT_3D ( 'NONE', #2604, #551, #2963 ) ; +#1483 = ORIENTED_EDGE ( 'NONE', *, *, #1163, .F. ) ; +#1484 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .T. ) ; +#1485 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 16.12922815753416800, 9.407511798917322900 ) ) ; +#1486 = VERTEX_POINT ( 'NONE', #3570 ) ; +#1487 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247688800, 4.987243147919475200, 76.09432346314807200 ) ) ; +#1488 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 77.50000000000002800 ) ) ; +#1489 = ORIENTED_EDGE ( 'NONE', *, *, #3765, .F. ) ; +#1490 = ADVANCED_FACE ( 'NONE', ( #1238 ), #1471, .T. ) ; +#1491 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#1492 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 7.625158136161789500E-017 ) ) ; +#1493 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 10.97144472737258900, 10.95389216971474700 ) ) ; +#1494 = EDGE_CURVE ( 'NONE', #2662, #4155, #331, .T. ) ; +#1495 = CARTESIAN_POINT ( 'NONE', ( 29.98546223878630500, 20.43546794293721900, 71.91734211534240700 ) ) ; +#1496 = CIRCLE ( 'NONE', #1928, 1.199999999999999700 ) ; +#1497 = LINE ( 'NONE', #436, #2409 ) ; +#1498 = EDGE_LOOP ( 'NONE', ( #414, #3056, #4061, #1418 ) ) ; +#1499 = CARTESIAN_POINT ( 'NONE', ( 27.87446321515193400, 1.172436098558474100, 77.47399239786588500 ) ) ; +#1500 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 12.44364090477508000, 5.297989821470142000 ) ) ; +#1501 = VECTOR ( 'NONE', #2362, 1000.000000000000100 ) ; +#1502 = FACE_OUTER_BOUND ( 'NONE', #2117, .T. ) ; +#1503 = EDGE_CURVE ( 'NONE', #1202, #1954, #1023, .T. ) ; +#1504 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -20.00000000000000400, 33.80000000000000400 ) ) ; +#1505 = CARTESIAN_POINT ( 'NONE', ( 0.2587144622353747500, 21.63736119553601600, 65.97995481999984700 ) ) ; +#1506 = FACE_OUTER_BOUND ( 'NONE', #4324, .T. ) ; +#1507 = VECTOR ( 'NONE', #962, 1000.000000000000000 ) ; +#1508 = AXIS2_PLACEMENT_3D ( 'NONE', #4329, #2276, #228 ) ; +#1509 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.49999999999999500, 41.29999999999999700 ) ) ; +#1510 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 19.32382484416539400, 30.94326542854308900 ) ) ; +#1511 = VECTOR ( 'NONE', #2558, 1000.000000000000000 ) ; +#1512 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.550799999999994400, 67.00000000000002800 ) ) ; +#1513 = CIRCLE ( 'NONE', #1379, 1.200000000000006600 ) ; +#1514 = ORIENTED_EDGE ( 'NONE', *, *, #4255, .T. ) ; +#1515 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 4.901885784518481300, 6.130111304856686000 ) ) ; +#1516 = CIRCLE ( 'NONE', #2401, 3.189999999999998600 ) ; +#1517 = DIRECTION ( 'NONE', ( -1.000000000000000000, 6.938893903909172900E-016, 2.407412430484717400E-031 ) ) ; +#1518 = ORIENTED_EDGE ( 'NONE', *, *, #510, .F. ) ; +#1519 = EDGE_CURVE ( 'NONE', #1808, #1160, #232, .T. ) ; +#1520 = ORIENTED_EDGE ( 'NONE', *, *, #4098, .T. ) ; +#1521 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.90000000000000200, 35.00000000000000000 ) ) ; +#1522 = ORIENTED_EDGE ( 'NONE', *, *, #1435, .F. ) ; +#1523 = ORIENTED_EDGE ( 'NONE', *, *, #4122, .F. ) ; +#1524 = ORIENTED_EDGE ( 'NONE', *, *, #1209, .T. ) ; +#1525 = EDGE_CURVE ( 'NONE', #1309, #4016, #3694, .T. ) ; +#1526 = CARTESIAN_POINT ( 'NONE', ( 0.3282560712543761700, 0.02046639767924224000, 76.25047654481410600 ) ) ; +#1527 = EDGE_LOOP ( 'NONE', ( #1962, #1353, #2288, #3111 ) ) ; +#1528 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 3.359116094742780900, 0.3493694734188245700 ) ) ; +#1529 = VERTEX_POINT ( 'NONE', #432 ) ; +#1530 = ORIENTED_EDGE ( 'NONE', *, *, #1240, .T. ) ; +#1531 = CARTESIAN_POINT ( 'NONE', ( 28.60891606709703400, -10.68821032130985700, 1.531589227533362000 ) ) ; +#1532 = EDGE_CURVE ( 'NONE', #1306, #76, #2746, .T. ) ; +#1533 = EDGE_LOOP ( 'NONE', ( #1849, #3495, #860, #4286 ) ) ; +#1534 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 69.95000000000003100 ) ) ; +#1535 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -22.50000000000000400, 55.00000000000000700 ) ) ; +#1536 = ORIENTED_EDGE ( 'NONE', *, *, #984, .T. ) ; +#1537 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1538 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1539 = ORIENTED_EDGE ( 'NONE', *, *, #327, .F. ) ; +#1540 = CARTESIAN_POINT ( 'NONE', ( 1.917625078213862900, 0.8865531766488175000, 77.43347912600727100 ) ) ; +#1541 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 9.566489781553880700E-016, 8.673617379884035500E-016 ) ) ; +#1542 = AXIS2_PLACEMENT_3D ( 'NONE', #2159, #3569, #1470 ) ; +#1543 = AXIS2_PLACEMENT_3D ( 'NONE', #2704, #644, #3065 ) ; +#1544 = FACE_OUTER_BOUND ( 'NONE', #1001, .T. ) ; +#1545 = PERSON_AND_ORGANIZATION ( #1892, #3247 ) ; +#1546 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -12.99999999999999800, 1.379105163401561800E-014 ) ) ; +#1547 = FACE_OUTER_BOUND ( 'NONE', #408, .T. ) ; +#1548 = FACE_OUTER_BOUND ( 'NONE', #552, .T. ) ; +#1549 = EDGE_CURVE ( 'NONE', #1357, #735, #924, .T. ) ; +#1550 = VERTEX_POINT ( 'NONE', #2508 ) ; +#1551 = FACE_BOUND ( 'NONE', #24, .T. ) ; +#1552 = FACE_OUTER_BOUND ( 'NONE', #2606, .T. ) ; +#1553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.49999999999999500, 41.29999999999999700 ) ) ; +#1555 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1556 = EDGE_CURVE ( 'NONE', #2710, #76, #2649, .T. ) ; +#1557 = VECTOR ( 'NONE', #275, 1000.000000000000000 ) ; +#1558 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1559 = AXIS2_PLACEMENT_3D ( 'NONE', #1078, #739, #3507 ) ; +#1560 = FACE_OUTER_BOUND ( 'NONE', #3151, .T. ) ; +#1561 = ORIENTED_EDGE ( 'NONE', *, *, #2008, .T. ) ; +#1562 = CYLINDRICAL_SURFACE ( 'NONE', #218, 2.500000000000002200 ) ; +#1563 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.301042606982605100E-016 ) ) ; +#1564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1565 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1566 = VERTEX_POINT ( 'NONE', #452 ) ; +#1567 = VERTEX_POINT ( 'NONE', #2160 ) ; +#1568 = EDGE_CURVE ( 'NONE', #1954, #1683, #3461, .T. ) ; +#1569 = ORIENTED_EDGE ( 'NONE', *, *, #849, .F. ) ; +#1570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1571 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .F. ) ; +#1572 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1573 = VERTEX_POINT ( 'NONE', #2525 ) ; +#1574 = CARTESIAN_POINT ( 'NONE', ( 29.96550830153882900, 4.702473244481725000, 75.42654006001969000 ) ) ; +#1575 = EDGE_CURVE ( 'NONE', #76, #839, #4353, .T. ) ; +#1576 = VERTEX_POINT ( 'NONE', #1813 ) ; +#1577 = AXIS2_PLACEMENT_3D ( 'NONE', #2896, #3269, #3628 ) ; +#1578 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1579 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#1580 = ORIENTED_EDGE ( 'NONE', *, *, #1669, .T. ) ; +#1581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1582 = ORIENTED_EDGE ( 'NONE', *, *, #327, .T. ) ; +#1583 = AXIS2_PLACEMENT_3D ( 'NONE', #2461, #412, #2816 ) ; +#1584 = VERTEX_POINT ( 'NONE', #470 ) ; +#1585 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1586 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -22.90000000000000200, 35.00000000000000000 ) ) ; +#1587 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 19.99999999999999600, 67.54999999999999700 ) ) ; +#1588 = LINE ( 'NONE', #3217, #688 ) ; +#1589 = VECTOR ( 'NONE', #3866, 1000.000000000000000 ) ; +#1590 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #183, .NOT_KNOWN. ) ; +#1591 = CARTESIAN_POINT ( 'NONE', ( 1.130563896455888000, 23.16709170061281500, 69.18653490669684900 ) ) ; +#1592 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000000000, 4.999999999999973400, 77.50000000000002800 ) ) ; +#1593 = EDGE_LOOP ( 'NONE', ( #4406, #100, #4272, #3064, #46 ) ) ; +#1594 = EDGE_CURVE ( 'NONE', #2675, #2760, #1704, .T. ) ; +#1595 = FACE_OUTER_BOUND ( 'NONE', #2427, .T. ) ; +#1596 = LINE ( 'NONE', #3415, #4128 ) ; +#1597 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -20.00000000000001100, 61.20000000000001700 ) ) ; +#1598 = FACE_OUTER_BOUND ( 'NONE', #3927, .T. ) ; +#1599 = VECTOR ( 'NONE', #4045, 1000.000000000000000 ) ; +#1600 = EDGE_CURVE ( 'NONE', #1529, #1306, #1604, .T. ) ; +#1601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.301042606982605100E-016 ) ) ; +#1602 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 4.610519863848959500, 0.6725802643449493300 ) ) ; +#1603 = PLANE ( 'NONE', #2077 ) ; +#1604 = CIRCLE ( 'NONE', #204, 2.500000000000002200 ) ; +#1605 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -12.99999999999999800, 5.984795992119975800E-015 ) ) ; +#1606 = EDGE_CURVE ( 'NONE', #76, #2662, #1939, .T. ) ; +#1607 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 9.999999999999976900, 77.50000000000002800 ) ) ; +#1608 = CIRCLE ( 'NONE', #1079, 1.200000000000006600 ) ; +#1609 = ORIENTED_EDGE ( 'NONE', *, *, #3026, .F. ) ; +#1610 = CYLINDRICAL_SURFACE ( 'NONE', #2500, 3.189999999999998600 ) ; +#1611 = AXIS2_PLACEMENT_3D ( 'NONE', #4306, #2249, #205 ) ; +#1612 = ORIENTED_EDGE ( 'NONE', *, *, #3699, .F. ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999978700, 77.50000000000002800 ) ) ; +#1614 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 6.893781339493275000, 7.242293827108274400 ) ) ; +#1615 = ORIENTED_EDGE ( 'NONE', *, *, #3023, .T. ) ; +#1616 = CARTESIAN_POINT ( 'NONE', ( 29.24656916120816800, 4.887626195572258900, 76.79646748033826500 ) ) ; +#1617 = ORIENTED_EDGE ( 'NONE', *, *, #3618, .T. ) ; +#1618 = AXIS2_PLACEMENT_3D ( 'NONE', #1887, #4296, #16 ) ; +#1619 = CARTESIAN_POINT ( 'NONE', ( 0.6698729810778068000, -10.50000000000000000, 2.500000000000000000 ) ) ; +#1620 = ORIENTED_EDGE ( 'NONE', *, *, #1291, .F. ) ; +#1621 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.178938284644431100E-016, 1.000000000000000000 ) ) ; +#1622 = ORIENTED_EDGE ( 'NONE', *, *, #2177, .F. ) ; +#1623 = EDGE_LOOP ( 'NONE', ( #1409, #1615, #1711, #4318 ) ) ; +#1624 = VERTEX_POINT ( 'NONE', #2903 ) ; +#1625 = EDGE_CURVE ( 'NONE', #1251, #316, #4261, .T. ) ; +#1626 = EDGE_LOOP ( 'NONE', ( #3013, #206, #258, #2838 ) ) ; +#1627 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1628 = ORIENTED_EDGE ( 'NONE', *, *, #3136, .T. ) ; +#1629 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 12.84412064374199700, 5.674588899008485400 ) ) ; +#1630 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ; +#1631 = EDGE_CURVE ( 'NONE', #1529, #1160, #704, .T. ) ; +#1632 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884037900E-017 ) ) ; +#1633 = ORIENTED_EDGE ( 'NONE', *, *, #1606, .T. ) ; +#1634 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998900, -5.000000000000021300, 80.00000000000002800 ) ) ; +#1635 = AXIS2_PLACEMENT_3D ( 'NONE', #2779, #721, #3138 ) ; +#1636 = ORIENTED_EDGE ( 'NONE', *, *, #2257, .T. ) ; +#1637 = CIRCLE ( 'NONE', #3476, 3.189999999999998600 ) ; +#1638 = AXIS2_PLACEMENT_3D ( 'NONE', #2032, #4422, #2383 ) ; +#1639 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1640 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.220446049250313700E-014, 80.00000000000002800 ) ) ; +#1641 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 16.74096024345871200, 10.26439019494152100 ) ) ; +#1642 = VECTOR ( 'NONE', #997, 1000.000000000000000 ) ; +#1643 = FACE_OUTER_BOUND ( 'NONE', #4220, .T. ) ; +#1644 = ORIENTED_EDGE ( 'NONE', *, *, #4379, .F. ) ; +#1645 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 24.99999999999999600, 80.00000000000004300 ) ) ; +#1646 = LINE ( 'NONE', #3759, #2477 ) ; +#1647 = LINE ( 'NONE', #2428, #4304 ) ; +#1648 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998900, -5.000000000000021300, 80.00000000000002800 ) ) ; +#1649 = EDGE_CURVE ( 'NONE', #316, #2665, #3358, .T. ) ; +#1650 = CIRCLE ( 'NONE', #1303, 3.189999999999998600 ) ; +#1651 = EDGE_CURVE ( 'NONE', #722, #1676, #828, .T. ) ; +#1652 = CIRCLE ( 'NONE', #940, 1.199999999999999700 ) ; +#1653 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1654 = ADVANCED_FACE ( 'NONE', ( #2421 ), #1387, .T. ) ; +#1655 = FACE_OUTER_BOUND ( 'NONE', #2274, .T. ) ; +#1656 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -5.000000000000018700, 77.50000000000002800 ) ) ; +#1657 = ORIENTED_EDGE ( 'NONE', *, *, #3053, .F. ) ; +#1658 = AXIS2_PLACEMENT_3D ( 'NONE', #1047, #3470, #1378 ) ; +#1659 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1660 = FACE_OUTER_BOUND ( 'NONE', #2454, .T. ) ; +#1661 = ORIENTED_EDGE ( 'NONE', *, *, #2166, .T. ) ; +#1662 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3019, #600, #1273, #3718, #1616, #4043, #1971, #2136, #45, #2437, #386, #2787, #730, #3145, #1069, #3497, #1406, #3848 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.001127151740952749500, 0.001648484797538329600, 0.002169817854123909700, 0.002691150910709490300, 0.003212483967295070300, 0.003733817023880650400, 0.004255150080466231800, 0.004776483137051812400, 0.005297816193637393800 ), + .UNSPECIFIED. ) ; +#1663 = ORIENTED_EDGE ( 'NONE', *, *, #3012, .F. ) ; +#1664 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.50000000000000400, 26.19999999999999900 ) ) ; +#1665 = ORIENTED_EDGE ( 'NONE', *, *, #1503, .F. ) ; +#1666 = AXIS2_PLACEMENT_3D ( 'NONE', #1056, #3832, #3131 ) ; +#1667 = EDGE_LOOP ( 'NONE', ( #2287, #211, #2957, #3283, #2338 ) ) ; +#1668 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 17.92091512821198400, 24.68270788363027200 ) ) ; +#1669 = EDGE_CURVE ( 'NONE', #2385, #988, #2630, .T. ) ; +#1670 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1671 = ORIENTED_EDGE ( 'NONE', *, *, #3070, .T. ) ; +#1672 = ADVANCED_FACE ( 'NONE', ( #601 ), #4044, .F. ) ; +#1673 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .F. ) ; +#1674 = EDGE_CURVE ( 'NONE', #2295, #1566, #509, .T. ) ; +#1675 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .T. ) ; +#1676 = VERTEX_POINT ( 'NONE', #535 ) ; +#1677 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1678 = ORIENTED_EDGE ( 'NONE', *, *, #3744, .F. ) ; +#1679 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#1680 = EDGE_CURVE ( 'NONE', #2665, #3377, #3137, .T. ) ; +#1681 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 6.893781339762224300, 7.242293826647522100 ) ) ; +#1682 = PLANE ( 'NONE', #921 ) ; +#1683 = VERTEX_POINT ( 'NONE', #2944 ) ; +#1684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1685 = ORIENTED_EDGE ( 'NONE', *, *, #1649, .T. ) ; +#1686 = AXIS2_PLACEMENT_3D ( 'NONE', #1218, #3661, #1558 ) ; +#1687 = VECTOR ( 'NONE', #3885, 1000.000000000000000 ) ; +#1688 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1689 = CIRCLE ( 'NONE', #2622, 2.500000000000002200 ) ; +#1690 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -22.50000000000000400, 55.00000000000000700 ) ) ; +#1691 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.499999999999996900, 15.49999999999998600 ) ) ; +#1692 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -3.637955742747657900, 21.10709478017819100 ) ) ; +#1693 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1145, #1479, #3918, #1823, #4236, #2181, #132, #2531, #481, #2890, #820, #3239, #1159, #3595, #1493, #3932, #1838, #4253, #2197, #151, #2548, #494, #2907, #837, #3253, #1176, #3611, #1510, #3947, #1855, #4269, #2209 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001391602908700175900, 0.002783205817400351800, 0.004174808726100528100, 0.005566411634800704500, 0.008349617452201059700, 0.01113282326960141900, 0.01391602908700177900, 0.01669923490440213700, 0.01948244072180249600, 0.02226564653920285300, 0.02504885235660320500, 0.02783205817400355800, 0.03339846980880426700, 0.03896488144360498600, 0.04453129307840569800 ), + .UNSPECIFIED. ) ; +#1694 = PLANE ( 'NONE', #214 ) ; +#1695 = CIRCLE ( 'NONE', #3604, 1.000000000000000900 ) ; +#1696 = LINE ( 'NONE', #2358, #696 ) ; +#1697 = AXIS2_PLACEMENT_3D ( 'NONE', #4404, #3072, #3417 ) ; +#1698 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1699 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.00000000000001100, 5.204170427930424400E-015 ) ) ; +#1700 = ADVANCED_FACE ( 'NONE', ( #3259 ), #3960, .T. ) ; +#1701 = VECTOR ( 'NONE', #3493, 1000.000000000000000 ) ; +#1702 = CIRCLE ( 'NONE', #3301, 1.200000000000006600 ) ; +#1703 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.249999999999999800, 78.75000000000002800 ) ) ; +#1704 = CIRCLE ( 'NONE', #223, 1.199999999999999700 ) ; +#1705 = EDGE_CURVE ( 'NONE', #1907, #1486, #1281, .T. ) ; +#1706 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -20.00000000000001800, 80.00000000000000000 ) ) ; +#1707 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1708 = CIRCLE ( 'NONE', #1508, 5.050800000000001500 ) ; +#1709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1710 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1711 = ORIENTED_EDGE ( 'NONE', *, *, #3128, .T. ) ; +#1712 = EDGE_CURVE ( 'NONE', #1676, #2385, #4133, .T. ) ; +#1713 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1714 = CIRCLE ( 'NONE', #2643, 3.189999999999998600 ) ; +#1715 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1717 = ORIENTED_EDGE ( 'NONE', *, *, #3080, .F. ) ; +#1718 = ORIENTED_EDGE ( 'NONE', *, *, #984, .F. ) ; +#1719 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1720 = AXIS2_PLACEMENT_3D ( 'NONE', #2601, #547, #2959 ) ; +#1721 = EDGE_LOOP ( 'NONE', ( #3764, #2781, #1125, #2111 ) ) ; +#1722 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1723 = ADVANCED_FACE ( 'NONE', ( #387 ), #3849, .F. ) ; +#1724 = EDGE_LOOP ( 'NONE', ( #614, #630 ) ) ; +#1725 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.301042606982605100E-016 ) ) ; +#1726 = ORIENTED_EDGE ( 'NONE', *, *, #1314, .F. ) ; +#1727 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 21.83734630586382500, 20.40807489822380600 ) ) ; +#1728 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1729 = ORIENTED_EDGE ( 'NONE', *, *, #3121, .F. ) ; +#1730 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -25.00100000000001900, 72.50000000000001400 ) ) ; +#1731 = ORIENTED_EDGE ( 'NONE', *, *, #3559, .F. ) ; +#1732 = ORIENTED_EDGE ( 'NONE', *, *, #4326, .T. ) ; +#1733 = EDGE_CURVE ( 'NONE', #4155, #1410, #314, .T. ) ; +#1734 = EDGE_LOOP ( 'NONE', ( #566, #39, #3816, #1197 ) ) ; +#1735 = VERTEX_POINT ( 'NONE', #3220 ) ; +#1736 = EDGE_CURVE ( 'NONE', #3377, #930, #1693, .T. ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 68.75000000000000000 ) ) ; +#1738 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 21.19999999999999600, 68.75000000000000000 ) ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 23.69507608065548600, 27.20480178358838300 ) ) ; +#1740 = PLANE ( 'NONE', #2767 ) ; +#1741 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000005800, 67.00000000000002800 ) ) ; +#1742 = ADVANCED_FACE ( 'NONE', ( #278 ), #2513, .F. ) ; +#1743 = LINE ( 'NONE', #3873, #4386 ) ; +#1744 = DATE_AND_TIME ( #2680, #3632 ) ; +#1745 = AXIS2_PLACEMENT_3D ( 'NONE', #2073, #357, #3120 ) ; +#1746 = ORIENTED_EDGE ( 'NONE', *, *, #2414, .F. ) ; +#1747 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#1748 = VECTOR ( 'NONE', #2697, 1000.000000000000000 ) ; +#1749 = FACE_OUTER_BOUND ( 'NONE', #4008, .T. ) ; +#1750 = ORIENTED_EDGE ( 'NONE', *, *, #1680, .T. ) ; +#1751 = AXIS2_PLACEMENT_3D ( 'NONE', #3955, #1866, #4278 ) ; +#1752 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -3.637955742747639200, 21.10709478017819400 ) ) ; +#1753 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 25.00000000000000000, 38.00964647528397200 ) ) ; +#1754 = CIRCLE ( 'NONE', #3782, 3.189999999999998600 ) ; +#1755 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1756 = VECTOR ( 'NONE', #1719, 1000.000000000000000 ) ; +#1757 = CARTESIAN_POINT ( 'NONE', ( 2.125536784848028700, 3.827563901441544600, 77.47399239786589900 ) ) ; +#1758 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 20.00000000000000000, 40.00000000000002800 ) ) ; +#1759 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.991006225469872600, 21.20617812313072600 ) ) ; +#1760 = AXIS2_PLACEMENT_3D ( 'NONE', #3492, #1401, #3841 ) ; +#1761 = LINE ( 'NONE', #618, #1557 ) ; +#1762 = AXIS2_PLACEMENT_3D ( 'NONE', #3400, #1307, #3748 ) ; +#1763 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 68.75000000000000000 ) ) ; +#1764 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996400, 1.250000000000021100, 77.50000000000002800 ) ) ; +#1765 = CIRCLE ( 'NONE', #990, 1.250000000000001100 ) ; +#1766 = EDGE_LOOP ( 'NONE', ( #2325, #1054, #969, #4215, #2225 ) ) ; +#1767 = CARTESIAN_POINT ( 'NONE', ( 0.05737213031698962200, 0.2043075621473913200, 75.55001294024467000 ) ) ; +#1768 = EDGE_CURVE ( 'NONE', #3172, #3329, #2091, .T. ) ; +#1769 = ADVANCED_FACE ( 'NONE', ( #2936, #3033 ), #3959, .F. ) ; +#1770 = FACE_OUTER_BOUND ( 'NONE', #3879, .T. ) ; +#1771 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1772 = EDGE_LOOP ( 'NONE', ( #4051, #4058, #4094, #4119 ) ) ; +#1773 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 18.20957630335673000, 25.63256297818762200 ) ) ; +#1774 = PLANE ( 'NONE', #2261 ) ; +#1775 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -25.00000000000000700, 55.00000000000000700 ) ) ; +#1776 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -25.00100000000001900, 55.50000000000000700 ) ) ; +#1777 = ORIENTED_EDGE ( 'NONE', *, *, #2909, .F. ) ; +#1778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.618453522039313800E-016, -1.000000000000000000 ) ) ; +#1780 = ORIENTED_EDGE ( 'NONE', *, *, #3150, .T. ) ; +#1781 = EDGE_CURVE ( 'NONE', #4053, #3963, #1076, .T. ) ; +#1782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.178938284644431100E-016, 1.000000000000000000 ) ) ; +#1783 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 68.75000000000002800 ) ) ; +#1784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1785 = ORIENTED_EDGE ( 'NONE', *, *, #2203, .T. ) ; +#1786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1787 = ORIENTED_EDGE ( 'NONE', *, *, #3169, .F. ) ; +#1788 = AXIS2_PLACEMENT_3D ( 'NONE', #2576, #519, #2929 ) ; +#1789 = ORIENTED_EDGE ( 'NONE', *, *, #2177, .T. ) ; +#1790 = VERTEX_POINT ( 'NONE', #2935 ) ; +#1791 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1792 = VERTEX_POINT ( 'NONE', #527 ) ; +#1793 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 20.74056858201078800, 17.63703814364213000 ) ) ; +#1794 = CARTESIAN_POINT ( 'NONE', ( 29.96338687082123500, 0.3032021367109627400, 75.43067845327593100 ) ) ; +#1795 = AXIS2_PLACEMENT_3D ( 'NONE', #1026, #3445, #1355 ) ; +#1796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1797 = VERTEX_POINT ( 'NONE', #3640 ) ; +#1798 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.50000000000000400, 8.699999999999995700 ) ) ; +#1799 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.940206225469869300, 20.53158018112177500 ) ) ; +#1800 = EDGE_LOOP ( 'NONE', ( #3709, #3716, #3743, #3762 ) ) ; +#1801 = ADVANCED_FACE ( 'NONE', ( #2808 ), #975, .F. ) ; +#1802 = ORIENTED_EDGE ( 'NONE', *, *, #3198, .T. ) ; +#1803 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1804 = EDGE_LOOP ( 'NONE', ( #1052, #4111 ) ) ; +#1805 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#1806 = EDGE_CURVE ( 'NONE', #2971, #3315, #1985, .T. ) ; +#1807 = CARTESIAN_POINT ( 'NONE', ( 29.93224650951068700, 20.84680143534430000, 65.66710403966594400 ) ) ; +#1808 = VERTEX_POINT ( 'NONE', #1592 ) ; +#1809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1810 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 18.44149786438380900, 12.98585396443313300 ) ) ; +#1811 = EDGE_CURVE ( 'NONE', #3929, #4016, #3647, .T. ) ; +#1812 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.499999999999996900, 15.49999999999998600 ) ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999923200, 2.499999999999993800, 78.75000000000002800 ) ) ; +#1814 = VECTOR ( 'NONE', #4198, 1000.000000000000000 ) ; +#1815 = LINE ( 'NONE', #1426, #1589 ) ; +#1816 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2843, #429, #1117, #3547, #1452, #3892, #1794, #4210, #2156, #110, #2504, #448 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004578727004010830100, 0.0009157454008021660100, 0.001144681751002707500, 0.001373618101203249200, 0.001831490801604331600 ), + .UNSPECIFIED. ) ; +#1817 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1818 = ORIENTED_EDGE ( 'NONE', *, *, #686, .T. ) ; +#1819 = AXIS2_PLACEMENT_3D ( 'NONE', #2055, #13, #2410 ) ; +#1820 = VECTOR ( 'NONE', #598, 1000.000000000000000 ) ; +#1821 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -25.00000000000001100, 72.50000000000001400 ) ) ; +#1822 = VECTOR ( 'NONE', #1538, 1000.000000000000000 ) ; +#1823 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 1.846729460480436100, 5.150682521652976600 ) ) ; +#1824 = CARTESIAN_POINT ( 'NONE', ( 28.86797887704516800, 23.16886253511970000, 69.17423742764926000 ) ) ; +#1825 = CIRCLE ( 'NONE', #3660, 5.050800000000001500 ) ; +#1826 = ADVANCED_FACE ( 'NONE', ( #67 ), #880, .F. ) ; +#1827 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -25.00000000000000000, 0.0000000000000000000 ) ) ; +#1828 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 10.97144472710206900, 10.95389216993893700 ) ) ; +#1829 = VECTOR ( 'NONE', #3554, 1000.000000000000000 ) ; +#1830 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1831 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1832 = APPROVAL ( #1156, 'UNSPECIFIED' ) ; +#1833 = VECTOR ( 'NONE', #3294, 1000.000000000000000 ) ; +#1834 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#1835 = EDGE_CURVE ( 'NONE', #3963, #207, #1886, .T. ) ; +#1836 = VERTEX_POINT ( 'NONE', #1963 ) ; +#1837 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -22.50000000000000000, 10.00000000000000700 ) ) ; +#1838 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 12.63983982630276500, 13.12855283372759300 ) ) ; +#1839 = LINE ( 'NONE', #2479, #932 ) ; +#1840 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 19.99999999999999300, 71.93999999999999800 ) ) ; +#1841 = ORIENTED_EDGE ( 'NONE', *, *, #881, .T. ) ; +#1842 = EDGE_CURVE ( 'NONE', #1991, #2860, #3525, .T. ) ; +#1843 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #2528, #474 ) ; +#1844 = ORIENTED_EDGE ( 'NONE', *, *, #1335, .F. ) ; +#1845 = CARTESIAN_POINT ( 'NONE', ( 28.19586565910229200, 0.7612413129185249300, 77.40480650930260300 ) ) ; +#1846 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 11.57297802038650900, 4.535086636793419500 ) ) ; +#1847 = ORIENTED_EDGE ( 'NONE', *, *, #2893, .T. ) ; +#1848 = CARTESIAN_POINT ( 'NONE', ( 0.08087788396102943400, 4.999999999999979600, 76.19307411319040600 ) ) ; +#1849 = ORIENTED_EDGE ( 'NONE', *, *, #3475, .F. ) ; +#1850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1851 = EDGE_CURVE ( 'NONE', #2624, #2760, #4397, .T. ) ; +#1852 = CARTESIAN_POINT ( 'NONE', ( 0.06890658058637710900, 20.85368832292929400, 65.66894423091019900 ) ) ; +#1853 = ORIENTED_EDGE ( 'NONE', *, *, #3524, .F. ) ; +#1854 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.550799999999994400, 67.00000000000002800 ) ) ; +#1855 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.91490208446566300, 36.34503788334599500 ) ) ; +#1856 = EDGE_LOOP ( 'NONE', ( #292, #355, #362, #396, #410, #462, #475, #487, #526, #571 ) ) ; +#1857 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 2.710505431213761500E-015, 5.000000000000000000 ) ) ; +#1858 = AXIS2_PLACEMENT_3D ( 'NONE', #4105, #1027, #681 ) ; +#1859 = ORIENTED_EDGE ( 'NONE', *, *, #1256, .T. ) ; +#1860 = EDGE_LOOP ( 'NONE', ( #3491, #854 ) ) ; +#1861 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 7.025043960085503700, 1.600328090208255700 ) ) ; +#1862 = ORIENTED_EDGE ( 'NONE', *, *, #2008, .F. ) ; +#1863 = AXIS2_PLACEMENT_3D ( 'NONE', #2708, #647, #3068 ) ; +#1864 = AXIS2_PLACEMENT_3D ( 'NONE', #3539, #2833, #3888 ) ; +#1865 = ORIENTED_EDGE ( 'NONE', *, *, #3053, .T. ) ; +#1866 = DIRECTION ( 'NONE', ( -1.734723475976805900E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1867 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999998400, -14.99999999999998000, 68.75000000000002800 ) ) ; +#1868 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1869 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1870 = EDGE_CURVE ( 'NONE', #2107, #2133, #1650, .T. ) ; +#1871 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.550800000000000600, 21.18695830425251000 ) ) ; +#1872 = LINE ( 'NONE', #4172, #3725 ) ; +#1873 = APPROVAL_DATE_TIME ( #2794, #682 ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 1.846729460622046300, 5.150682521151933800 ) ) ; +#1875 = CYLINDRICAL_SURFACE ( 'NONE', #578, 3.189999999999998600 ) ; +#1876 = LINE ( 'NONE', #1454, #176 ) ; +#1877 = EDGE_CURVE ( 'NONE', #2911, #2235, #765, .T. ) ; +#1878 = ORIENTED_EDGE ( 'NONE', *, *, #2224, .T. ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( 29.83482033433755700, 4.996071295048820600, 76.14100086755209400 ) ) ; +#1880 = CARTESIAN_POINT ( 'NONE', ( 28.09656682928043700, -10.94406522204202800, 1.068022854511095000 ) ) ; +#1881 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999998400, -14.99999999999998000, 68.75000000000002800 ) ) ; +#1882 = CIRCLE ( 'NONE', #3325, 2.499999999999998700 ) ; +#1883 = VECTOR ( 'NONE', #2045, 1000.000000000000000 ) ; +#1884 = ORIENTED_EDGE ( 'NONE', *, *, #2668, .T. ) ; +#1885 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #2424, #372 ) ; +#1886 = LINE ( 'NONE', #4363, #2693 ) ; +#1887 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -20.00000000000001100, 60.00000000000001400 ) ) ; +#1888 = AXIS2_PLACEMENT_3D ( 'NONE', #4132, #373, #2775 ) ; +#1889 = LINE ( 'NONE', #131, #3740 ) ; +#1890 = CARTESIAN_POINT ( 'NONE', ( 2.211452530716895700, 1.321043050755241100, 77.48431997868470900 ) ) ; +#1891 = ORIENTED_EDGE ( 'NONE', *, *, #3229, .T. ) ; +#1892 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#1893 = LINE ( 'NONE', #1759, #3654 ) ; +#1894 = EDGE_LOOP ( 'NONE', ( #1404, #2996, #3000, #2332 ) ) ; +#1895 = EDGE_CURVE ( 'NONE', #2295, #574, #1761, .T. ) ; +#1896 = VERTEX_POINT ( 'NONE', #3035 ) ; +#1897 = EDGE_LOOP ( 'NONE', ( #1644, #2999, #2951, #1255, #2841, #4417, #2510, #3872 ) ) ; +#1898 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.151057110211241400E-014, 77.50000000000002800 ) ) ; +#1899 = ORIENTED_EDGE ( 'NONE', *, *, #3598, .F. ) ; +#1900 = EDGE_CURVE ( 'NONE', #2235, #3572, #4305, .T. ) ; +#1901 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#1902 = ORIENTED_EDGE ( 'NONE', *, *, #2298, .F. ) ; +#1903 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.991006225469872600, 16.15537812313072400 ) ) ; +#1904 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 9.999999999999985800, 75.00000000000002800 ) ) ; +#1905 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -22.50000000000000000, 10.00000000000000700 ) ) ; +#1906 = ORIENTED_EDGE ( 'NONE', *, *, #1926, .T. ) ; +#1907 = VERTEX_POINT ( 'NONE', #3385 ) ; +#1908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#1909 = AXIS2_PLACEMENT_3D ( 'NONE', #4429, #339, #2742 ) ; +#1910 = ORIENTED_EDGE ( 'NONE', *, *, #3391, .F. ) ; +#1911 = ORIENTED_EDGE ( 'NONE', *, *, #1921, .T. ) ; +#1912 = PLANE ( 'NONE', #759 ) ; +#1913 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1914 = ORIENTED_EDGE ( 'NONE', *, *, #3236, .F. ) ; +#1915 = PLANE ( 'NONE', #768 ) ; +#1916 = ORIENTED_EDGE ( 'NONE', *, *, #3687, .F. ) ; +#1917 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.220446049250313700E-014, 80.00000000000002800 ) ) ; +#1918 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, -1.301042606982605300E-014, 77.50000000000002800 ) ) ; +#1919 = AXIS2_PLACEMENT_3D ( 'NONE', #1730, #1392, #389 ) ; +#1920 = AXIS2_PLACEMENT_3D ( 'NONE', #1436, #2487, #430 ) ; +#1921 = EDGE_CURVE ( 'NONE', #1948, #1683, #646, .T. ) ; +#1922 = LINE ( 'NONE', #3320, #117 ) ; +#1923 = LINE ( 'NONE', #3179, #910 ) ; +#1924 = CIRCLE ( 'NONE', #2162, 1.250000000000001100 ) ; +#1925 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -25.00100000000001900, 72.00000000000001400 ) ) ; +#1926 = EDGE_CURVE ( 'NONE', #83, #3704, #4197, .T. ) ; +#1927 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.500000000000005800, 67.00000000000002800 ) ) ; +#1928 = AXIS2_PLACEMENT_3D ( 'NONE', #1033, #3455, #1365 ) ; +#1929 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1930 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 19.99999999999999600, 68.75000000000000000 ) ) ; +#1931 = LINE ( 'NONE', #2304, #3685 ) ; +#1932 = CARTESIAN_POINT ( 'NONE', ( 29.99672581334016300, 4.343373805261530100, 75.13927510370884000 ) ) ; +#1933 = VECTOR ( 'NONE', #4285, 1000.000000000000000 ) ; +#1934 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 24.99999999999999600, 80.00000000000004300 ) ) ; +#1935 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1936 = EDGE_CURVE ( 'NONE', #3572, #1208, #2481, .T. ) ; +#1937 = CARTESIAN_POINT ( 'NONE', ( 0.01410617654138159600, 20.43010589705190900, 71.91801658620447300 ) ) ; +#1938 = FACE_BOUND ( 'NONE', #266, .T. ) ; +#1939 = CIRCLE ( 'NONE', #178, 1.250000000000000000 ) ; +#1940 = AXIS2_PLACEMENT_3D ( 'NONE', #3435, #3780, #1679 ) ; +#1941 = FACE_OUTER_BOUND ( 'NONE', #2192, .T. ) ; +#1942 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1943 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .T. ) ; +#1944 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.749999999999972900, 75.00000000000002800 ) ) ; +#1945 = AXIS2_PLACEMENT_3D ( 'NONE', #1339, #3778, #1677 ) ; +#1946 = FACE_OUTER_BOUND ( 'NONE', #2018, .T. ) ; +#1947 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -20.00000000000000000, 10.00000000000000700 ) ) ; +#1948 = VERTEX_POINT ( 'NONE', #1648 ) ; +#1949 = CARTESIAN_POINT ( 'NONE', ( 1.150066143451882400, 23.19029927348823300, 68.53831149139659800 ) ) ; +#1950 = ORIENTED_EDGE ( 'NONE', *, *, #2774, .F. ) ; +#1951 = EDGE_CURVE ( 'NONE', #1208, #4164, #1449, .T. ) ; +#1952 = ORIENTED_EDGE ( 'NONE', *, *, #441, .T. ) ; +#1953 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 19.99999999999999600, 67.54999999999999700 ) ) ; +#1954 = VERTEX_POINT ( 'NONE', #3050 ) ; +#1955 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #861, #3276, #1194, #3633, #1531, #3968, #1880, #4293, #2232, #188, #2590, #537, #2945, #877, #3292, #1207, #3648, #1546 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0007316585053725246900, 0.001463317010745049400, 0.002194975516117574100, 0.002926634021490098800, 0.004389951032235148200, 0.005121609537607678900, 0.005487438790293944700, 0.005853268042980211400 ), + .UNSPECIFIED. ) ; +#1956 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1957 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 5.234596384247187700, 0.8740674709234932400 ) ) ; +#1958 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999978700, 80.00000000000002800 ) ) ; +#1959 = EDGE_CURVE ( 'NONE', #3468, #1093, #4086, .T. ) ; +#1960 = ORIENTED_EDGE ( 'NONE', *, *, #3284, .F. ) ; +#1961 = CARTESIAN_POINT ( 'NONE', ( 4.193713949599407800, -12.42982205099893500, 0.04875256944795301100 ) ) ; +#1962 = ORIENTED_EDGE ( 'NONE', *, *, #2257, .F. ) ; +#1963 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -4.550800000000000600, 21.18695830425251000 ) ) ; +#1964 = EDGE_LOOP ( 'NONE', ( #993, #1110, #3796, #530 ) ) ; +#1965 = AXIS2_PLACEMENT_3D ( 'NONE', #1372, #3819, #1716 ) ; +#1966 = ORIENTED_EDGE ( 'NONE', *, *, #2879, .F. ) ; +#1967 = ORIENTED_EDGE ( 'NONE', *, *, #3339, .F. ) ; +#1968 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1969 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1970 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 9.691104115879706900, 3.089847920620890400 ) ) ; +#1971 = CARTESIAN_POINT ( 'NONE', ( 28.85478694897830500, 4.727816980728144700, 77.10676345234504900 ) ) ; +#1972 = LINE ( 'NONE', #4189, #2793 ) ; +#1973 = APPROVAL_PERSON_ORGANIZATION ( #2923, #682, #2887 ) ; +#1974 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 68.75000000000002800 ) ) ; +#1975 = EDGE_CURVE ( 'NONE', #3172, #4357, #3199, .T. ) ; +#1976 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1977 = LINE ( 'NONE', #623, #967 ) ; +#1978 = CIRCLE ( 'NONE', #3032, 2.500000000000002200 ) ; +#1979 = CIRCLE ( 'NONE', #2869, 0.5000000000000004400 ) ; +#1980 = LINE ( 'NONE', #4432, #1883 ) ; +#1981 = EDGE_CURVE ( 'NONE', #4168, #3185, #2364, .T. ) ; +#1982 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999923200, 2.499999999999993800, 77.50000000000002800 ) ) ; +#1983 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 10.35376321696019600, 10.25432647394026200 ) ) ; +#1984 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1487, #1167, #1848, #4263 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.589415207398530100E-019, 0.0002967085115976359100 ), + .UNSPECIFIED. ) ; +#1985 = LINE ( 'NONE', #1253, #185 ) ; +#1986 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.301042606982605100E-016, -1.000000000000000000 ) ) ; +#1988 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #3366, #3087 ) ; +#1989 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1990 = LINE ( 'NONE', #2831, #189 ) ; +#1991 = VERTEX_POINT ( 'NONE', #1319 ) ; +#1992 = FACE_OUTER_BOUND ( 'NONE', #4367, .T. ) ; +#1993 = AXIS2_PLACEMENT_3D ( 'NONE', #3534, #2122, #764 ) ; +#1994 = ORIENTED_EDGE ( 'NONE', *, *, #3359, .T. ) ; +#1995 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1996 = PLANE ( 'NONE', #948 ) ; +#1997 = CARTESIAN_POINT ( 'NONE', ( 1.597336855494033600E-012, 18.48871052892831200, 12.95199058814876400 ) ) ; +#1998 = ORIENTED_EDGE ( 'NONE', *, *, #3467, .T. ) ; +#1999 = VERTEX_POINT ( 'NONE', #2718 ) ; +#2000 = AXIS2_PLACEMENT_3D ( 'NONE', #4244, #2189, #142 ) ; +#2001 = AXIS2_PLACEMENT_3D ( 'NONE', #3761, #1659, #4084 ) ; +#2002 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -20.00000000000001100, 72.00000000000001400 ) ) ; +#2003 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -25.00000000000001100, 72.00000000000001400 ) ) ; +#2004 = ORIENTED_EDGE ( 'NONE', *, *, #2764, .T. ) ; +#2005 = ADVANCED_FACE ( 'NONE', ( #443 ), #329, .F. ) ; +#2006 = ORIENTED_EDGE ( 'NONE', *, *, #1064, .F. ) ; +#2007 = ORIENTED_EDGE ( 'NONE', *, *, #3367, .F. ) ; +#2008 = EDGE_CURVE ( 'NONE', #3376, #3929, #2262, .T. ) ; +#2009 = ORIENTED_EDGE ( 'NONE', *, *, #1669, .F. ) ; +#2010 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -25.00000000000001100, 80.00000000000001400 ) ) ; +#2011 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2012 = ORIENTED_EDGE ( 'NONE', *, *, #1291, .T. ) ; +#2013 = ORIENTED_EDGE ( 'NONE', *, *, #957, .T. ) ; +#2014 = EDGE_CURVE ( 'NONE', #3185, #3077, #2163, .T. ) ; +#2015 = CARTESIAN_POINT ( 'NONE', ( 6.098637220230962400E-017, 20.21740381874204900, 71.94000000000001200 ) ) ; +#2016 = CARTESIAN_POINT ( 'NONE', ( 6.419766481290805500E-032, 19.99999999999999600, 38.16596535483022000 ) ) ; +#2017 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.90000000000000200, 35.00000000000000000 ) ) ; +#2018 = EDGE_LOOP ( 'NONE', ( #3153, #3208, #3235 ) ) ; +#2019 = ORIENTED_EDGE ( 'NONE', *, *, #1188, .F. ) ; +#2020 = ORIENTED_EDGE ( 'NONE', *, *, #1736, .T. ) ; +#2021 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.550799999999999700, 22.10328947826993600 ) ) ; +#2022 = LINE ( 'NONE', #4336, #922 ) ; +#2023 = ORIENTED_EDGE ( 'NONE', *, *, #2740, .T. ) ; +#2024 = ORIENTED_EDGE ( 'NONE', *, *, #1395, .F. ) ; +#2025 = AXIS2_PLACEMENT_3D ( 'NONE', #3462, #1370, #3815 ) ; +#2026 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -2.550799999999994400, 67.00000000000002800 ) ) ; +#2027 = ADVANCED_FACE ( 'NONE', ( #2982 ), #3792, .T. ) ; +#2028 = VECTOR ( 'NONE', #746, 1000.000000000000000 ) ; +#2029 = FACE_OUTER_BOUND ( 'NONE', #3008, .T. ) ; +#2030 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 16.48121611920757300, 20.35381541122976800 ) ) ; +#2032 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -20.00000000000001100, 60.00000000000001400 ) ) ; +#2033 = FACE_BOUND ( 'NONE', #3170, .T. ) ; +#2034 = LINE ( 'NONE', #164, #1135 ) ; +#2035 = EDGE_CURVE ( 'NONE', #1464, #2562, #2036, .T. ) ; +#2036 = CIRCLE ( 'NONE', #4080, 1.199999999999999700 ) ; +#2037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2038 = EDGE_CURVE ( 'NONE', #3077, #3561, #1231, .T. ) ; +#2039 = CYLINDRICAL_SURFACE ( 'NONE', #425, 3.189999999999998600 ) ; +#2040 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 67.55000000000002600 ) ) ; +#2041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9961946980917455500, -0.08715574274765827700 ) ) ; +#2042 = CIRCLE ( 'NONE', #1611, 2.500000000000000000 ) ; +#2043 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884033500E-016, 4.896380180139586500, 6.127646804916340200 ) ) ; +#2044 = VERTEX_POINT ( 'NONE', #1035 ) ; +#2045 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884037900E-017 ) ) ; +#2046 = ADVANCED_FACE ( 'NONE', ( #2878, #1140, #3906, #3781, #1938, #1020 ), #22, .F. ) ; +#2047 = LINE ( 'NONE', #3076, #2430 ) ; +#2048 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2049 = ORIENTED_EDGE ( 'NONE', *, *, #3421, .T. ) ; +#2050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2051 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.940206225469869300, 20.53158018112177500 ) ) ; +#2052 = ORIENTED_EDGE ( 'NONE', *, *, #2834, .F. ) ; +#2053 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#2054 = VERTEX_POINT ( 'NONE', #1051 ) ; +#2055 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 2.499999999999987100, 75.00000000000002800 ) ) ; +#2056 = CC_DESIGN_APPROVAL ( #1832, ( #1590 ) ) ; +#2057 = ORIENTED_EDGE ( 'NONE', *, *, #2445, .T. ) ; +#2058 = DIRECTION ( 'NONE', ( -9.648735898058289700E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2059 = EDGE_CURVE ( 'NONE', #908, #3756, #128, .T. ) ; +#2060 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2061 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2062 = ORIENTED_EDGE ( 'NONE', *, *, #3440, .F. ) ; +#2063 = EDGE_CURVE ( 'NONE', #574, #1357, #1825, .T. ) ; +#2064 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2065 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -25.00000000000001100, 72.50000000000001400 ) ) ; +#2066 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.49999999999999500, 42.49999999999999300 ) ) ; +#2067 = VERTEX_POINT ( 'NONE', #3828 ) ; +#2068 = ORIENTED_EDGE ( 'NONE', *, *, #3374, .F. ) ; +#2069 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -15.00000000000000200, 68.75000000000002800 ) ) ; +#2070 = ADVANCED_FACE ( 'NONE', ( #1 ), #2784, .F. ) ; +#2071 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#2072 = ORIENTED_EDGE ( 'NONE', *, *, #3427, .F. ) ; +#2073 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 20.00000000000001100, 5.204170427930424400E-015 ) ) ; +#2074 = EDGE_CURVE ( 'NONE', #3561, #290, #3591, .T. ) ; +#2075 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -20.00000000000001100, 72.00000000000001400 ) ) ; +#2076 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -25.00100000000001500, 55.50000000000000700 ) ) ; +#2077 = AXIS2_PLACEMENT_3D ( 'NONE', #402, #3517, #1424 ) ; +#2078 = FACE_BOUND ( 'NONE', #2595, .T. ) ; +#2079 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2080 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884037900E-017 ) ) ; +#2081 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 36.20000000000000300 ) ) ; +#2082 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2083 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 17.92091512826750600, 24.68270788360403100 ) ) ; +#2084 = CIRCLE ( 'NONE', #4102, 5.050799999999994400 ) ; +#2085 = FACE_OUTER_BOUND ( 'NONE', #2898, .T. ) ; +#2086 = AXIS2_PLACEMENT_3D ( 'NONE', #2066, #23, #2419 ) ; +#2087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2088 = CIRCLE ( 'NONE', #2379, 3.189999999999998600 ) ; +#2089 = FACE_OUTER_BOUND ( 'NONE', #2677, .T. ) ; +#2090 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2091 = LINE ( 'NONE', #3264, #1193 ) ; +#2092 = EDGE_CURVE ( 'NONE', #83, #2894, #2644, .T. ) ; +#2093 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884037900E-017 ) ) ; +#2094 = ADVANCED_FACE ( 'NONE', ( #2743, #3688 ), #2803, .F. ) ; +#2095 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996800, 1.249999999999983100, 80.00000000000002800 ) ) ; +#2096 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -2.550799999999998800, 22.10328947826993600 ) ) ; +#2097 = CYLINDRICAL_SURFACE ( 'NONE', #1112, 1.200000000000006600 ) ; +#2098 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2099 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999923200, 2.499999999999993800, 77.50000000000002800 ) ) ; +#2100 = CARTESIAN_POINT ( 'NONE', ( 7.908678025540282700E-013, 24.26166608762481800, 30.13615309576005400 ) ) ; +#2101 = ORIENTED_EDGE ( 'NONE', *, *, #3174, .F. ) ; +#2102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2103 = EDGE_CURVE ( 'NONE', #2575, #1094, #3456, .T. ) ; +#2104 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2105 = LINE ( 'NONE', #2821, #284 ) ; +#2106 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999993500, 20.00000000000001800, 69.95000000000001700 ) ) ; +#2107 = VERTEX_POINT ( 'NONE', #3845 ) ; +#2108 = EDGE_LOOP ( 'NONE', ( #1663, #2435 ) ) ; +#2109 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.550799999999987300, 15.49999999999998600 ) ) ; +#2110 = AXIS2_PLACEMENT_3D ( 'NONE', #1440, #3881, #1779 ) ; +#2111 = ORIENTED_EDGE ( 'NONE', *, *, #3699, .T. ) ; +#2112 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -22.50000000000000400, 55.50000000000000700 ) ) ; +#2113 = ORIENTED_EDGE ( 'NONE', *, *, #3540, .T. ) ; +#2114 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.734723475976807100E-016, 1.000000000000000000 ) ) ; +#2115 = AXIS2_PLACEMENT_3D ( 'NONE', #1347, #3785, #1684 ) ; +#2116 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 24.90777038909293100, 36.03529468141348200 ) ) ; +#2117 = EDGE_LOOP ( 'NONE', ( #1046, #1295, #790, #1675 ) ) ; +#2118 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.50000000000000400, 7.499999999999996400 ) ) ; +#2119 = CARTESIAN_POINT ( 'NONE', ( 1.804134340897648900, 4.238758687081495500, 77.40480650930254600 ) ) ; +#2120 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 25.00000000000000000, 40.00000000000002800 ) ) ; +#2121 = ORIENTED_EDGE ( 'NONE', *, *, #586, .F. ) ; +#2122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.602085213965210600E-016, -1.000000000000000000 ) ) ; +#2123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.301042606982605100E-016 ) ) ; +#2124 = ORIENTED_EDGE ( 'NONE', *, *, #3664, .F. ) ; +#2125 = ADVANCED_FACE ( 'NONE', ( #1598 ), #3355, .F. ) ; +#2126 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#2127 = EDGE_LOOP ( 'NONE', ( #3312, #213, #86, #3430 ) ) ; +#2128 = ORIENTED_EDGE ( 'NONE', *, *, #3452, .F. ) ; +#2129 = EDGE_CURVE ( 'NONE', #3227, #1211, #4256, .T. ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 0.007709905232700986500, 0.5231031036735395200, 75.22171533840322900 ) ) ; +#2131 = ADVANCED_FACE ( 'NONE', ( #1506 ), #4130, .F. ) ; +#2132 = ORIENTED_EDGE ( 'NONE', *, *, #1279, .F. ) ; +#2133 = VERTEX_POINT ( 'NONE', #3877 ) ; +#2134 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2135 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 23.04666413778138100, 24.35251737432266200 ) ) ; +#2136 = CARTESIAN_POINT ( 'NONE', ( 28.58489986586195300, 4.566923569514247400, 77.25762977529787200 ) ) ; +#2137 = EDGE_CURVE ( 'NONE', #4369, #1948, #4349, .T. ) ; +#2138 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2139 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2140 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -107.4621125123532700, 80.00000000000001400 ) ) ; +#2141 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 0.0000000000000000000, 77.50000000000002800 ) ) ; +#2142 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.637955742747659200, 21.10709478017819100 ) ) ; +#2143 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#2144 = CYLINDRICAL_SURFACE ( 'NONE', #1577, 1.200000000000006600 ) ; +#2145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 7.625158136161789500E-017, -1.000000000000000000 ) ) ; +#2146 = VERTEX_POINT ( 'NONE', #1775 ) ; +#2147 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -15.00000000000000200, 68.75000000000002800 ) ) ; +#2148 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.550799999999999700, 22.10328947826993600 ) ) ; +#2149 = CYLINDRICAL_SURFACE ( 'NONE', #186, 3.189999999999998600 ) ; +#2150 = CYLINDRICAL_SURFACE ( 'NONE', #4310, 5.050800000000001500 ) ; +#2151 = ADVANCED_FACE ( 'NONE', ( #596 ), #505, .F. ) ; +#2152 = ORIENTED_EDGE ( 'NONE', *, *, #849, .T. ) ; +#2153 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2154 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 15.38108826074246200, 17.90348083256245500 ) ) ; +#2155 = FACE_OUTER_BOUND ( 'NONE', #2772, .T. ) ; +#2156 = CARTESIAN_POINT ( 'NONE', ( 29.92391946327822400, 0.1711064711284847600, 75.61591454212180000 ) ) ; +#2157 = LINE ( 'NONE', #1512, #3902 ) ; +#2158 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 65.56000000000000200 ) ) ; +#2159 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999993500, 21.20000000000001700, 68.75000000000000000 ) ) ; +#2160 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -20.00000000000001100, 58.80000000000000400 ) ) ; +#2161 = ADVANCED_FACE ( 'NONE', ( #700 ), #2312, .T. ) ; +#2162 = AXIS2_PLACEMENT_3D ( 'NONE', #2458, #406, #2811 ) ; +#2163 = CIRCLE ( 'NONE', #2473, 5.050799999999998000 ) ; +#2164 = AXIS2_PLACEMENT_3D ( 'NONE', #3370, #1276, #3721 ) ; +#2165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.347358039593635500E-016, -1.000000000000000000 ) ) ; +#2166 = EDGE_CURVE ( 'NONE', #2450, #3943, #2416, .T. ) ; +#2167 = FACE_OUTER_BOUND ( 'NONE', #4362, .T. ) ; +#2168 = CARTESIAN_POINT ( 'NONE', ( 29.74361030645419700, 21.62974084498723900, 65.97605717566814600 ) ) ; +#2169 = EDGE_CURVE ( 'NONE', #2357, #2386, #1381, .T. ) ; +#2170 = VECTOR ( 'NONE', #1722, 1000.000000000000000 ) ; +#2171 = ORIENTED_EDGE ( 'NONE', *, *, #884, .F. ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 17.90437616633384400, 12.07616055398159600 ) ) ; +#2173 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 38.19000000000000500 ) ) ; +#2174 = FACE_OUTER_BOUND ( 'NONE', #3262, .T. ) ; +#2175 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999995700, 4.999999999999997300, 75.00000000000002800 ) ) ; +#2176 = ORIENTED_EDGE ( 'NONE', *, *, #3012, .T. ) ; +#2177 = EDGE_CURVE ( 'NONE', #4106, #3172, #4039, .T. ) ; +#2178 = ADVANCED_FACE ( 'NONE', ( #3027 ), #265, .T. ) ; +#2179 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#2180 = ORIENTED_EDGE ( 'NONE', *, *, #2628, .T. ) ; +#2181 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 3.183809393211120200, 5.468878040524623800 ) ) ; +#2182 = ORIENTED_EDGE ( 'NONE', *, *, #3066, .F. ) ; +#2183 = ORIENTED_EDGE ( 'NONE', *, *, #2782, .F. ) ; +#2184 = CARTESIAN_POINT ( 'NONE', ( 28.98537031305919600, 23.02104133883130300, 69.79517072375220700 ) ) ; +#2185 = AXIS2_PLACEMENT_3D ( 'NONE', #4358, #260, #2661 ) ; +#2186 = CARTESIAN_POINT ( 'NONE', ( 2.092008537135755400E-015, -5.000000000000020400, 80.00000000000002800 ) ) ; +#2187 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 14.77861398876913100, 7.708105780708466500 ) ) ; +#2188 = AXIS2_PLACEMENT_3D ( 'NONE', #2347, #2011, #1313 ) ; +#2189 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.775557561562891400E-016, 1.000000000000000000 ) ) ; +#2190 = EDGE_LOOP ( 'NONE', ( #3937, #3973, #3984, #4027 ) ) ; +#2191 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.50000000000000400, 24.99999999999999600 ) ) ; +#2192 = EDGE_LOOP ( 'NONE', ( #1630, #2660, #1732, #4338 ) ) ; +#2193 = DATE_TIME_ROLE ( 'classification_date' ) ; +#2194 = VERTEX_POINT ( 'NONE', #603 ) ; +#2195 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -22.50000000000000400, 55.50000000000000700 ) ) ; +#2196 = EDGE_LOOP ( 'NONE', ( #2908, #4334, #301, #287 ) ) ; +#2197 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 14.10901588739879000, 15.46506492654343900 ) ) ; +#2198 = EDGE_CURVE ( 'NONE', #1573, #4369, #3132, .T. ) ; +#2199 = PLANE ( 'NONE', #1182 ) ; +#2200 = VERTEX_POINT ( 'NONE', #4372 ) ; +#2201 = CARTESIAN_POINT ( 'NONE', ( 28.58006077507521100, 0.4363342246853264500, 77.25998063544331300 ) ) ; +#2202 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 8.008206604311766300, 8.080953447874639700 ) ) ; +#2203 = EDGE_CURVE ( 'NONE', #3376, #1309, #2088, .T. ) ; +#2204 = VECTOR ( 'NONE', #363, 1000.000000000000000 ) ; +#2205 = CARTESIAN_POINT ( 'NONE', ( -2.358817351513775300E-014, 20.21773427346562700, 65.55999999999994500 ) ) ; +#2206 = AXIS2_PLACEMENT_3D ( 'NONE', #745, #3165, #1087 ) ; +#2207 = LINE ( 'NONE', #1699, #1272 ) ; +#2208 = CIRCLE ( 'NONE', #2320, 1.250000000000001100 ) ; +#2209 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 20.00000000000000000, 40.00000000000002800 ) ) ; +#2210 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2211 = VECTOR ( 'NONE', #2845, 1000.000000000000000 ) ; +#2212 = FACE_OUTER_BOUND ( 'NONE', #3434, .T. ) ; +#2213 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996400, 1.249999999999983600, 78.75000000000002800 ) ) ; +#2214 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 6.442061422688897000, 1.338272403228181400 ) ) ; +#2215 = VECTOR ( 'NONE', #1447, 1000.000000000000000 ) ; +#2216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2217 = CYLINDRICAL_SURFACE ( 'NONE', #1179, 1.199999999999999700 ) ; +#2218 = EDGE_CURVE ( 'NONE', #1573, #4250, #273, .T. ) ; +#2219 = EDGE_LOOP ( 'NONE', ( #1038, #4287 ) ) ; +#2220 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2221 = VECTOR ( 'NONE', #2948, 1000.000000000000000 ) ; +#2222 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996400, 2.081668171172168500E-014, 77.50000000000002800 ) ) ; +#2223 = EDGE_LOOP ( 'NONE', ( #248, #2902 ) ) ; +#2224 = EDGE_CURVE ( 'NONE', #891, #1104, #3956, .T. ) ; +#2225 = ORIENTED_EDGE ( 'NONE', *, *, #2798, .F. ) ; +#2226 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.500000000000005800, 67.00000000000002800 ) ) ; +#2227 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 2.706027946051594600, 0.2204787924563998700 ) ) ; +#2228 = ORIENTED_EDGE ( 'NONE', *, *, #1474, .T. ) ; +#2229 = VERTEX_POINT ( 'NONE', #963 ) ; +#2230 = ORIENTED_EDGE ( 'NONE', *, *, #3387, .F. ) ; +#2231 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2232 = CARTESIAN_POINT ( 'NONE', ( 27.54963891760159100, -11.26466454822348200, 0.6935341846158849000 ) ) ; +#2233 = AXIS2_PLACEMENT_3D ( 'NONE', #915, #3337, #1248 ) ; +#2234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2235 = VERTEX_POINT ( 'NONE', #2339 ) ; +#2236 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.550799999999999700, 22.10328947826993600 ) ) ; +#2237 = ORIENTED_EDGE ( 'NONE', *, *, #1136, .F. ) ; +#2238 = ORIENTED_EDGE ( 'NONE', *, *, #2625, .T. ) ; +#2239 = ORIENTED_EDGE ( 'NONE', *, *, #821, .F. ) ; +#2240 = ORIENTED_EDGE ( 'NONE', *, *, #3026, .T. ) ; +#2241 = CARTESIAN_POINT ( 'NONE', ( 2.408884835996050200, 1.808832971938070900, 77.49860324879847400 ) ) ; +#2242 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2243 = EDGE_LOOP ( 'NONE', ( #3641, #3675 ) ) ; +#2244 = AXIS2_PLACEMENT_3D ( 'NONE', #1812, #4229, #3911 ) ; +#2245 = AXIS2_PLACEMENT_3D ( 'NONE', #2574, #169, #1184 ) ; +#2246 = EDGE_LOOP ( 'NONE', ( #2514, #2573, #2584, #2620 ) ) ; +#2247 = EDGE_LOOP ( 'NONE', ( #3386, #3389, #3424, #3433 ) ) ; +#2248 = EDGE_CURVE ( 'NONE', #4425, #2229, #1277, .T. ) ; +#2249 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2250 = CIRCLE ( 'NONE', #1235, 1.250000000000000000 ) ; +#2251 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#2252 = ORIENTED_EDGE ( 'NONE', *, *, #382, .T. ) ; +#2253 = CARTESIAN_POINT ( 'NONE', ( 29.74776692697516700, 0.01275685208050111700, 76.09432346314818600 ) ) ; +#2254 = CIRCLE ( 'NONE', #4161, 1.200000000000006600 ) ; +#2255 = LINE ( 'NONE', #1554, #4187 ) ; +#2256 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.469446951953616200E-015, 0.0000000000000000000 ) ) ; +#2257 = EDGE_CURVE ( 'NONE', #3375, #908, #1979, .T. ) ; +#2258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#2259 = LINE ( 'NONE', #3333, #3081 ) ; +#2260 = LINE ( 'NONE', #2858, #1326 ) ; +#2261 = AXIS2_PLACEMENT_3D ( 'NONE', #4192, #90, #2485 ) ; +#2262 = LINE ( 'NONE', #1333, #3083 ) ; +#2263 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 2.059793774530124900, 10.46841981887819800 ) ) ; +#2264 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884036700E-017 ) ) ; +#2265 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 0.0000000000000000000, 75.00000000000002800 ) ) ; +#2266 = CIRCLE ( 'NONE', #645, 1.250000000000001100 ) ; +#2267 = AXIS2_PLACEMENT_3D ( 'NONE', #368, #2769, #712 ) ; +#2268 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#2269 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -10.50000000000000000, 2.500000000000000000 ) ) ; +#2270 = VECTOR ( 'NONE', #2093, 1000.000000000000000 ) ; +#2271 = ORIENTED_EDGE ( 'NONE', *, *, #4352, .F. ) ; +#2272 = EDGE_CURVE ( 'NONE', #1566, #1357, #2931, .T. ) ; +#2273 = VECTOR ( 'NONE', #1968, 1000.000000000000000 ) ; +#2274 = EDGE_LOOP ( 'NONE', ( #1352, #1400, #1414, #1476, #1518, #1539 ) ) ; +#2275 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -25.00000000000000700, 55.50000000000000700 ) ) ; +#2276 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2277 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2279 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 3.904708108629340000, 75.00000000000002800 ) ) ; +#2280 = ORIENTED_EDGE ( 'NONE', *, *, #961, .T. ) ; +#2281 = EDGE_CURVE ( 'NONE', #3278, #2200, #179, .T. ) ; +#2282 = AXIS2_PLACEMENT_3D ( 'NONE', #1043, #3466, #1374 ) ; +#2283 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -25.00000000000001100, 72.00000000000001400 ) ) ; +#2284 = ORIENTED_EDGE ( 'NONE', *, *, #3023, .F. ) ; +#2285 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.500000000000005800, 72.05080000000002400 ) ) ; +#2286 = CARTESIAN_POINT ( 'NONE', ( 0.1079886775113782500, 21.05247266519025500, 71.76862216791829500 ) ) ; +#2287 = ORIENTED_EDGE ( 'NONE', *, *, #2689, .F. ) ; +#2288 = ORIENTED_EDGE ( 'NONE', *, *, #3421, .F. ) ; +#2289 = ORIENTED_EDGE ( 'NONE', *, *, #3066, .T. ) ; +#2290 = ORIENTED_EDGE ( 'NONE', *, *, #590, .T. ) ; +#2291 = VERTEX_POINT ( 'NONE', #300 ) ; +#2292 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 7.703719777548943400E-031, 8.673617379884035500E-016 ) ) ; +#2293 = DESIGN_CONTEXT ( 'detailed design', #130, 'design' ) ; +#2294 = CARTESIAN_POINT ( 'NONE', ( 0.003264842058880927000, 4.343693616524493700, 75.13925550853815600 ) ) ; +#2295 = VERTEX_POINT ( 'NONE', #3063 ) ; +#2296 = ORIENTED_EDGE ( 'NONE', *, *, #3693, .T. ) ; +#2297 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #3398, #1491, ( #1590 ) ) ; +#2298 = EDGE_CURVE ( 'NONE', #2894, #2617, #64, .T. ) ; +#2299 = CIRCLE ( 'NONE', #3950, 5.050800000000001500 ) ; +#2300 = SHAPE_DEFINITION_REPRESENTATION ( #351, #1000 ) ; +#2301 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.49999999999999500, 43.69999999999999600 ) ) ; +#2302 = EDGE_CURVE ( 'NONE', #670, #1094, #1882, .T. ) ; +#2303 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #2509, #453 ) ; +#2304 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -2.550799999999991700, 80.00000000000000000 ) ) ; +#2305 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.476834155949680900, 5.939305158113272800 ) ) ; +#2306 = VECTOR ( 'NONE', #3779, 1000.000000000000000 ) ; +#2307 = PLANE ( 'NONE', #2185 ) ; +#2308 = VECTOR ( 'NONE', #3775, 1000.000000000000000 ) ; +#2309 = CARTESIAN_POINT ( 'NONE', ( 3.019435336126112400, -11.62452566858191700, 0.3888632093011227300 ) ) ; +#2310 = CARTESIAN_POINT ( 'NONE', ( 2.092008537135755400E-015, -5.000000000000020400, 77.50000000000002800 ) ) ; +#2311 = EDGE_CURVE ( 'NONE', #4370, #2200, #464, .T. ) ; +#2312 = TOROIDAL_SURFACE ( 'NONE', #783, 1.250000000000000000, 1.250000000000000000 ) ; +#2313 = VECTOR ( 'NONE', #3746, 1000.000000000000000 ) ; +#2314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765829100 ) ) ; +#2315 = VECTOR ( 'NONE', #788, 1000.000000000000000 ) ; +#2316 = CYLINDRICAL_SURFACE ( 'NONE', #1219, 1.199999999999992600 ) ; +#2317 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2318 = CARTESIAN_POINT ( 'NONE', ( 2.006542990501920500E-013, 11.10778958130335600, 4.155382855842598000 ) ) ; +#2319 = ORIENTED_EDGE ( 'NONE', *, *, #2129, .T. ) ; +#2320 = AXIS2_PLACEMENT_3D ( 'NONE', #2750, #694, #3113 ) ; +#2321 = AXIS2_PLACEMENT_3D ( 'NONE', #1462, #3903, #1805 ) ; +#2322 = CIRCLE ( 'NONE', #2366, 1.200000000000006600 ) ; +#2323 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2324 = DIRECTION ( 'NONE', ( -4.625929269271481000E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2325 = ORIENTED_EDGE ( 'NONE', *, *, #3399, .T. ) ; +#2326 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2327 = ORIENTED_EDGE ( 'NONE', *, *, #3136, .F. ) ; +#2328 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.08715574274765829100, 0.9961946980917455500 ) ) ; +#2329 = ORIENTED_EDGE ( 'NONE', *, *, #2639, .T. ) ; +#2330 = EDGE_CURVE ( 'NONE', #3553, #4370, #2690, .T. ) ; +#2331 = ORIENTED_EDGE ( 'NONE', *, *, #3339, .T. ) ; +#2332 = ORIENTED_EDGE ( 'NONE', *, *, #3221, .F. ) ; +#2333 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 2.500000000000005800, 67.00000000000002800 ) ) ; +#2334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#2335 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 14.03504272837359900, 6.864401645800443300 ) ) ; +#2336 = ORIENTED_EDGE ( 'NONE', *, *, #1282, .T. ) ; +#2337 = EDGE_CURVE ( 'NONE', #2386, #25, #1754, .T. ) ; +#2338 = ORIENTED_EDGE ( 'NONE', *, *, #4070, .T. ) ; +#2339 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -3.637955742747659200, 21.10709478017819100 ) ) ; +#2340 = ORIENTED_EDGE ( 'NONE', *, *, #1594, .T. ) ; +#2341 = ORIENTED_EDGE ( 'NONE', *, *, #1705, .T. ) ; +#2342 = AXIS2_PLACEMENT_3D ( 'NONE', #3529, #1434, #3876 ) ; +#2343 = ORIENTED_EDGE ( 'NONE', *, *, #2361, .F. ) ; +#2344 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.550799999999995300, 15.49999999999998400 ) ) ; +#2345 = ORIENTED_EDGE ( 'NONE', *, *, #1310, .T. ) ; +#2346 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -25.00100000000001900, 72.00000000000001400 ) ) ; +#2347 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.49999999999999500, 42.49999999999999300 ) ) ; +#2348 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 14.99134450300661700, 17.03893732465059700 ) ) ; +#2349 = ADVANCED_FACE ( 'NONE', ( #3521 ), #756, .F. ) ; +#2350 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2352 = VECTOR ( 'NONE', #1901, 1000.000000000000000 ) ; +#2353 = DATE_AND_TIME ( #3296, #4182 ) ; +#2354 = EDGE_CURVE ( 'NONE', #4106, #2710, #3735, .T. ) ; +#2355 = FACE_OUTER_BOUND ( 'NONE', #3609, .T. ) ; +#2356 = VECTOR ( 'NONE', #2800, 1000.000000000000000 ) ; +#2357 = VERTEX_POINT ( 'NONE', #4108 ) ; +#2358 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -5.431212450939743700, 11.12379794200893800 ) ) ; +#2359 = FACE_BOUND ( 'NONE', #1266, .T. ) ; +#2360 = FACE_OUTER_BOUND ( 'NONE', #621, .T. ) ; +#2361 = EDGE_CURVE ( 'NONE', #105, #3375, #1646, .T. ) ; +#2362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765829100 ) ) ; +#2363 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2364 = LINE ( 'NONE', #4410, #4001 ) ; +#2365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2366 = AXIS2_PLACEMENT_3D ( 'NONE', #3858, #1755, #4174 ) ; +#2367 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.991006225469872600, 16.15537812313072400 ) ) ; +#2368 = CIRCLE ( 'NONE', #808, 3.189999999999998600 ) ; +#2369 = ADVANCED_FACE ( 'NONE', ( #3404, #4393, #4303, #1551, #642, #4191, #3303 ), #1682, .F. ) ; +#2370 = CIRCLE ( 'NONE', #1720, 5.000000000000000000 ) ; +#2371 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2372 = EDGE_LOOP ( 'NONE', ( #1916, #347, #4366, #844 ) ) ; +#2373 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2374 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 31.81000000000000600 ) ) ; +#2375 = CYLINDRICAL_SURFACE ( 'NONE', #172, 2.500000000000000000 ) ; +#2376 = ORIENTED_EDGE ( 'NONE', *, *, #2482, .T. ) ; +#2377 = AXIS2_PLACEMENT_3D ( 'NONE', #4146, #2442, #3504 ) ; +#2378 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 71.93999999999999800 ) ) ; +#2379 = AXIS2_PLACEMENT_3D ( 'NONE', #3383, #1289, #3734 ) ; +#2380 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 14.13588277643852500, 15.42995526668609500 ) ) ; +#2381 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -107.4621125123532600, -2.595512782538550200E-015 ) ) ; +#2382 = EDGE_CURVE ( 'NONE', #290, #2911, #553, .T. ) ; +#2383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2384 = ORIENTED_EDGE ( 'NONE', *, *, #2445, .F. ) ; +#2385 = VERTEX_POINT ( 'NONE', #685 ) ; +#2386 = VERTEX_POINT ( 'NONE', #3677 ) ; +#2387 = EDGE_CURVE ( 'NONE', #2194, #4378, #1444, .T. ) ; +#2388 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -5.431212450939743700, 11.12379794200893800 ) ) ; +#2389 = ORIENTED_EDGE ( 'NONE', *, *, #3250, .F. ) ; +#2390 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2391 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 19.99999999999998900, 80.00000000000002800 ) ) ; +#2392 = ORIENTED_EDGE ( 'NONE', *, *, #3484, .F. ) ; +#2393 = ADVANCED_FACE ( 'NONE', ( #3194 ), #437, .T. ) ; +#2394 = ORIENTED_EDGE ( 'NONE', *, *, #562, .F. ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998900, -5.000000000000021300, 77.50000000000002800 ) ) ; +#2396 = EDGE_CURVE ( 'NONE', #4018, #1290, #1325, .T. ) ; +#2397 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884037400E-016, 3.611997062768448800, 5.606999049104134200 ) ) ; +#2398 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.301042606982605300E-015, 75.00000000000002800 ) ) ; +#2399 = ORIENTED_EDGE ( 'NONE', *, *, #2998, .T. ) ; +#2400 = ORIENTED_EDGE ( 'NONE', *, *, #2952, .F. ) ; +#2401 = AXIS2_PLACEMENT_3D ( 'NONE', #1881, #4294, #2234 ) ; +#2402 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2404 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996100, 3.749999999999993800, 77.50000000000002800 ) ) ; +#2405 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 1.249999999999999600, 77.50000000000002800 ) ) ; +#2406 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.775557561562891400E-016, 1.000000000000000000 ) ) ; +#2407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.602085213965210600E-016, -1.000000000000000000 ) ) ; +#2408 = VECTOR ( 'NONE', #1071, 1000.000000000000000 ) ; +#2409 = VECTOR ( 'NONE', #4200, 1000.000000000000000 ) ; +#2410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2411 = ORIENTED_EDGE ( 'NONE', *, *, #3387, .T. ) ; +#2412 = CYLINDRICAL_SURFACE ( 'NONE', #2188, 1.199999999999999700 ) ; +#2413 = VECTOR ( 'NONE', #321, 1000.000000000000000 ) ; +#2414 = EDGE_CURVE ( 'NONE', #1529, #839, #2259, .T. ) ; +#2415 = ADVANCED_FACE ( 'NONE', ( #3997 ), #3900, .F. ) ; +#2416 = CIRCLE ( 'NONE', #1457, 1.199999999999999700 ) ; +#2417 = CIRCLE ( 'NONE', #3535, 0.5000000000000004400 ) ; +#2418 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2420 = EDGE_CURVE ( 'NONE', #894, #2459, #322, .T. ) ; +#2421 = FACE_OUTER_BOUND ( 'NONE', #3338, .T. ) ; +#2422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2423 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996800, -2.151057110211245800E-014, 77.50000000000002800 ) ) ; +#2424 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2425 = FACE_OUTER_BOUND ( 'NONE', #1897, .T. ) ; +#2426 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2427 = EDGE_LOOP ( 'NONE', ( #1131, #1520, #1661, #4276 ) ) ; +#2428 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.059793774530124900, 10.46841981887819800 ) ) ; +#2429 = AXIS2_PLACEMENT_3D ( 'NONE', #1867, #4279, #2216 ) ; +#2430 = VECTOR ( 'NONE', #1329, 1000.000000000000000 ) ; +#2431 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 25.00000000000002100, 16.56854249492382500 ) ) ; +#2432 = EDGE_LOOP ( 'NONE', ( #1802, #1847 ) ) ; +#2433 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 4.999999999999973400, 78.75000000000002800 ) ) ; +#2434 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2435 = ORIENTED_EDGE ( 'NONE', *, *, #2224, .F. ) ; +#2436 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 22.72802639231109400, 23.30402036373041600 ) ) ; +#2437 = CARTESIAN_POINT ( 'NONE', ( 28.19786746586591200, 4.241075159424217300, 77.40435336227305600 ) ) ; +#2438 = VERTEX_POINT ( 'NONE', #4343 ) ; +#2439 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 9.999999999999976900, 80.00000000000002800 ) ) ; +#2440 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -25.00000000000000700, 55.50000000000000700 ) ) ; +#2441 = ADVANCED_FACE ( 'NONE', ( #1229, #2359, #2978, #2033, #1133, #2155 ), #3702, .T. ) ; +#2442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.08715574274765827700, -0.9961946980917455500 ) ) ; +#2443 = ORIENTED_EDGE ( 'NONE', *, *, #793, .F. ) ; +#2444 = ORIENTED_EDGE ( 'NONE', *, *, #1781, .T. ) ; +#2445 = EDGE_CURVE ( 'NONE', #1464, #1104, #3776, .T. ) ; +#2446 = VERTEX_POINT ( 'NONE', #257 ) ; +#2447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2448 = ORIENTED_EDGE ( 'NONE', *, *, #827, .T. ) ; +#2449 = PLANE ( 'NONE', #2880 ) ; +#2450 = VERTEX_POINT ( 'NONE', #2658 ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -20.00000000000001100, 61.20000000000001700 ) ) ; +#2452 = EDGE_CURVE ( 'NONE', #795, #1173, #1931, .T. ) ; +#2453 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.749999999999972900, 76.25000000000002800 ) ) ; +#2454 = EDGE_LOOP ( 'NONE', ( #3480, #3545, #3548, #3601 ) ) ; +#2455 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 19.57519049195057200, 32.71979939425222700 ) ) ; +#2456 = EDGE_LOOP ( 'NONE', ( #587, #607 ) ) ; +#2457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2458 = CARTESIAN_POINT ( 'NONE', ( 1.530808498934191600E-016, 1.250000000000000000, 76.25000000000002800 ) ) ; +#2459 = VERTEX_POINT ( 'NONE', #3017 ) ; +#2460 = AXIS2_PLACEMENT_3D ( 'NONE', #1241, #3684, #1581 ) ; +#2461 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#2462 = ADVANCED_FACE ( 'NONE', ( #2873 ), #3715, .F. ) ; +#2463 = AXIS2_PLACEMENT_3D ( 'NONE', #789, #2714, #651 ) ; +#2464 = TOROIDAL_SURFACE ( 'NONE', #486, 1.250000000000000000, 1.250000000000000000 ) ; +#2465 = PERSON_AND_ORGANIZATION ( #1892, #3247 ) ; +#2466 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.57678997152151400, 32.73411871030167200 ) ) ; +#2467 = CARTESIAN_POINT ( 'NONE', ( 1.419939224924718500, 4.563665775314689200, 77.25998063544324200 ) ) ; +#2468 = ADVANCED_FACE ( 'NONE', ( #2738 ), #4433, .F. ) ; +#2469 = CYLINDRICAL_SURFACE ( 'NONE', #1697, 5.000000000000000000 ) ; +#2470 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2471 = CYLINDRICAL_SURFACE ( 'NONE', #2244, 5.050799999999998000 ) ; +#2472 = AXIS2_PLACEMENT_3D ( 'NONE', #3588, #1830, #2538 ) ; +#2473 = AXIS2_PLACEMENT_3D ( 'NONE', #1691, #4114, #2050 ) ; +#2474 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2475 = ORIENTED_EDGE ( 'NONE', *, *, #3867, .F. ) ; +#2476 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998900, -5.000000000000021300, 77.50000000000002800 ) ) ; +#2477 = VECTOR ( 'NONE', #3105, 1000.000000000000000 ) ; +#2478 = CIRCLE ( 'NONE', #3603, 0.5000000000000004400 ) ; +#2479 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.220446049250313700E-014, 80.00000000000002800 ) ) ; +#2480 = CARTESIAN_POINT ( 'NONE', ( -0.0004379111663651564900, 0.9413847493300815400, 75.02911346620030000 ) ) ; +#2481 = LINE ( 'NONE', #977, #558 ) ; +#2482 = EDGE_CURVE ( 'NONE', #1486, #4053, #914, .T. ) ; +#2483 = VERTEX_POINT ( 'NONE', #3030 ) ; +#2484 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 22.16490272180349000, 21.46727603589976900 ) ) ; +#2485 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884036700E-017 ) ) ; +#2486 = VECTOR ( 'NONE', #2220, 1000.000000000000000 ) ; +#2487 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2489 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -14.99999999999998000, 67.55000000000004000 ) ) ; +#2490 = EDGE_CURVE ( 'NONE', #1576, #147, #2641, .T. ) ; +#2491 = ADVANCED_FACE ( 'NONE', ( #1016 ), #4344, .F. ) ; +#2492 = CIRCLE ( 'NONE', #1885, 3.189999999999998600 ) ; +#2493 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1944, #2633, #4345, #2294, #245, #2647, #589, #3005, #931, #3350, #1262, #3705 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004578727004010573700, 0.0009157454008021147300, 0.001144681751002643400, 0.001373618101203172200, 0.001831490801604193300 ), + .UNSPECIFIED. ) ; +#2494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2495 = ORIENTED_EDGE ( 'NONE', *, *, #3506, .F. ) ; +#2496 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 1.250000000000021100, 75.00000000000002800 ) ) ; +#2497 = CIRCLE ( 'NONE', #201, 2.499999999999998700 ) ; +#2498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2499 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2500 = AXIS2_PLACEMENT_3D ( 'NONE', #4203, #3542, #1786 ) ; +#2501 = ADVANCED_FACE ( 'NONE', ( #125 ), #3042, .F. ) ; +#2502 = ORIENTED_EDGE ( 'NONE', *, *, #2337, .T. ) ; +#2503 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 19.89746834324857600, 15.75515259129687000 ) ) ; +#2504 = CARTESIAN_POINT ( 'NONE', ( 29.81508166154089800, 0.03063858488823973500, 75.95605736619397400 ) ) ; +#2505 = VERTEX_POINT ( 'NONE', #2683 ) ; +#2506 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 68.75000000000002800 ) ) ; +#2507 = ORIENTED_EDGE ( 'NONE', *, *, #2603, .T. ) ; +#2508 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999300, -1.309716224362489200E-014, 76.25000000000002800 ) ) ; +#2509 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2510 = ORIENTED_EDGE ( 'NONE', *, *, #1975, .T. ) ; +#2511 = ORIENTED_EDGE ( 'NONE', *, *, #478, .T. ) ; +#2512 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -25.00000000000000700, 60.00000000000001400 ) ) ; +#2513 = PLANE ( 'NONE', #1183 ) ; +#2514 = ORIENTED_EDGE ( 'NONE', *, *, #631, .F. ) ; +#2515 = EDGE_CURVE ( 'NONE', #1173, #585, #1695, .T. ) ; +#2516 = CARTESIAN_POINT ( 'NONE', ( 29.38790854769326800, 22.40246552145417200, 66.64165426781593700 ) ) ; +#2517 = ORIENTED_EDGE ( 'NONE', *, *, #617, .F. ) ; +#2518 = ADVANCED_FACE ( 'NONE', ( #3586 ), #1996, .F. ) ; +#2519 = ORIENTED_EDGE ( 'NONE', *, *, #3284, .T. ) ; +#2520 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -107.4621125123532600, -1.040176842443419200E-014 ) ) ; +#2521 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 13.39110673070525000, 14.28512078898359400 ) ) ; +#2522 = EDGE_CURVE ( 'NONE', #159, #1624, #2536, .T. ) ; +#2523 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -15.00000000000000200, 68.75000000000002800 ) ) ; +#2524 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2525 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 9.999999999999994700, 77.50000000000002800 ) ) ; +#2526 = ORIENTED_EDGE ( 'NONE', *, *, #2968, .F. ) ; +#2527 = EDGE_LOOP ( 'NONE', ( #4208, #4224, #4234, #4267 ) ) ; +#2528 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2529 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #130 ) ; +#2530 = AXIS2_PLACEMENT_3D ( 'NONE', #4407, #2363, #309 ) ; +#2531 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000700, 4.477647518441637300, 5.939794790894396200 ) ) ; +#2532 = CARTESIAN_POINT ( 'NONE', ( 29.17044497091852800, 22.76138263207909800, 70.36001985082127400 ) ) ; +#2533 = CIRCLE ( 'NONE', #927, 1.200000000000006600 ) ; +#2534 = LINE ( 'NONE', #3886, #3344 ) ; +#2535 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 14.05160888903404300, 6.882228110015788900 ) ) ; +#2536 = LINE ( 'NONE', #3407, #818 ) ; +#2537 = VECTOR ( 'NONE', #1324, 1000.000000000000000 ) ; +#2538 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2540 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #2465, #3928, ( #1590 ) ) ; +#2541 = CARTESIAN_POINT ( 'NONE', ( 1.064092579865356400, 23.08408546248022800, 67.90733516649757500 ) ) ; +#2542 = VECTOR ( 'NONE', #4175, 1000.000000000000000 ) ; +#2543 = LINE ( 'NONE', #4035, #1599 ) ; +#2544 = ADVANCED_FACE ( 'NONE', ( #1595 ), #2412, .F. ) ; +#2545 = APPROVAL_ROLE ( '' ) ; +#2546 = EDGE_CURVE ( 'NONE', #3144, #722, #3349, .T. ) ; +#2547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2548 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 15.38108826086633000, 17.90348083250329500 ) ) ; +#2549 = VECTOR ( 'NONE', #1139, 1000.000000000000000 ) ; +#2550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2551 = EDGE_CURVE ( 'NONE', #585, #1836, #3453, .T. ) ; +#2552 = VECTOR ( 'NONE', #2402, 1000.000000000000000 ) ; +#2553 = CARTESIAN_POINT ( 'NONE', ( 28.98535002573570200, 0.2109777364639990300, 77.01803210429871200 ) ) ; +#2554 = ORIENTED_EDGE ( 'NONE', *, *, #3250, .T. ) ; +#2555 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 11.12040690796161800, 4.165468211935826800 ) ) ; +#2556 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 31.81000000000000600 ) ) ; +#2557 = TOROIDAL_SURFACE ( 'NONE', #2463, 1.250000000000000000, 1.250000000000000000 ) ; +#2558 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2559 = VERTEX_POINT ( 'NONE', #3766 ) ; +#2560 = EDGE_CURVE ( 'NONE', #2483, #729, #695, .T. ) ; +#2561 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -3.637955742747639200, 21.10709478017819400 ) ) ; +#2562 = VERTEX_POINT ( 'NONE', #2711 ) ; +#2563 = EDGE_LOOP ( 'NONE', ( #4392, #32, #81, #145, #158, #161, #165, #200, #246, #283 ) ) ; +#2564 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.220446049250313700E-014, 80.00000000000002800 ) ) ; +#2565 = VERTEX_POINT ( 'NONE', #2026 ) ; +#2566 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999978700, 80.00000000000002800 ) ) ; +#2567 = AXIS2_PLACEMENT_3D ( 'NONE', #3186, #423, #1111 ) ; +#2568 = EDGE_LOOP ( 'NONE', ( #1478, #2389 ) ) ; +#2569 = DIRECTION ( 'NONE', ( -2.220446049250313100E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2570 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 3.619644048820823000, 5.609761970268440500 ) ) ; +#2571 = AXIS2_PLACEMENT_3D ( 'NONE', #3429, #4100, #2037 ) ; +#2572 = AXIS2_PLACEMENT_3D ( 'NONE', #3176, #416, #1102 ) ; +#2573 = ORIENTED_EDGE ( 'NONE', *, *, #2720, .T. ) ; +#2574 = CARTESIAN_POINT ( 'NONE', ( -6.938893903907228400E-014, 2.499999999999993800, 77.50000000000002800 ) ) ; +#2575 = VERTEX_POINT ( 'NONE', #650 ) ; +#2576 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -10.50000000000000000, 5.000000000000000000 ) ) ; +#2577 = ORIENTED_EDGE ( 'NONE', *, *, #3484, .T. ) ; +#2578 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2579 = ORIENTED_EDGE ( 'NONE', *, *, #2137, .T. ) ; +#2580 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, 25.00100000000000800, 60.00000000000002100 ) ) ; +#2581 = VERTEX_POINT ( 'NONE', #2374 ) ; +#2582 = EDGE_CURVE ( 'NONE', #1168, #2107, #594, .T. ) ; +#2583 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781441900E-015, 0.0000000000000000000 ) ) ; +#2584 = ORIENTED_EDGE ( 'NONE', *, *, #1851, .T. ) ; +#2585 = CARTESIAN_POINT ( 'NONE', ( 0.6344776708425138300, 0.07936222890806175800, 76.67342270231201000 ) ) ; +#2586 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 1.366449512656545700, 0.04532394026512717000 ) ) ; +#2587 = EDGE_CURVE ( 'NONE', #3315, #3278, #3251, .T. ) ; +#2588 = FACE_OUTER_BOUND ( 'NONE', #1721, .T. ) ; +#2589 = LOCAL_TIME ( 15, 7, 17.00000000000000000, #3510 ) ; +#2590 = CARTESIAN_POINT ( 'NONE', ( 26.59472798839006200, -11.88505100648488100, 0.2437621741664655900 ) ) ; +#2591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2592 = AXIS2_PLACEMENT_3D ( 'NONE', #540, #3651, #3972 ) ; +#2593 = LINE ( 'NONE', #3432, #638 ) ; +#2594 = CYLINDRICAL_SURFACE ( 'NONE', #1302, 1.200000000000006600 ) ; +#2595 = EDGE_LOOP ( 'NONE', ( #2124, #2128 ) ) ; +#2596 = VECTOR ( 'NONE', #342, 1000.000000000000000 ) ; +#2597 = VECTOR ( 'NONE', #2090, 1000.000000000000000 ) ; +#2598 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999924900, 2.323593919121670100, 77.50000000000004300 ) ) ; +#2599 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -3.550799999999999700, 22.10328947826993600 ) ) ; +#2600 = VECTOR ( 'NONE', #604, 1000.000000000000000 ) ; +#2601 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 20.00000000000000000, 40.00000000000002800 ) ) ; +#2602 = FACE_OUTER_BOUND ( 'NONE', #1766, .T. ) ; +#2603 = EDGE_CURVE ( 'NONE', #1896, #1486, #4251, .T. ) ; +#2604 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.550799999999994400, 67.00000000000002800 ) ) ; +#2605 = TOROIDAL_SURFACE ( 'NONE', #1909, 1.250000000000000000, 1.250000000000000000 ) ; +#2606 = EDGE_LOOP ( 'NONE', ( #903, #3607, #304, #2941 ) ) ; +#2607 = EDGE_CURVE ( 'NONE', #729, #91, #4127, .T. ) ; +#2608 = FACE_OUTER_BOUND ( 'NONE', #3173, .T. ) ; +#2609 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2610 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2612 = EDGE_LOOP ( 'NONE', ( #3541, #4405, #888, #1777 ) ) ; +#2613 = PLANE ( 'NONE', #14 ) ; +#2614 = AXIS2_PLACEMENT_3D ( 'NONE', #4091, #2030, #4419 ) ; +#2615 = ORIENTED_EDGE ( 'NONE', *, *, #2915, .F. ) ; +#2616 = ORIENTED_EDGE ( 'NONE', *, *, #640, .T. ) ; +#2617 = VERTEX_POINT ( 'NONE', #4118 ) ; +#2618 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2619 = ORIENTED_EDGE ( 'NONE', *, *, #3191, .T. ) ; +#2620 = ORIENTED_EDGE ( 'NONE', *, *, #906, .T. ) ; +#2621 = ORIENTED_EDGE ( 'NONE', *, *, #1279, .T. ) ; +#2622 = AXIS2_PLACEMENT_3D ( 'NONE', #1764, #4180, #2126 ) ; +#2623 = AXIS2_PLACEMENT_3D ( 'NONE', #285, #2688, #629 ) ; +#2624 = VERTEX_POINT ( 'NONE', #3798 ) ; +#2625 = EDGE_CURVE ( 'NONE', #2386, #1790, #2207, .T. ) ; +#2626 = ORIENTED_EDGE ( 'NONE', *, *, #2909, .T. ) ; +#2627 = VERTEX_POINT ( 'NONE', #11 ) ; +#2628 = EDGE_CURVE ( 'NONE', #3706, #1290, #500, .T. ) ; +#2629 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2630 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3275, #3967, #1879, #4291 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -1.000003258865244000E-005, 0.0002867084790091785100 ), + .UNSPECIFIED. ) ; +#2631 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 33.80000000000000400 ) ) ; +#2632 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#2633 = CARTESIAN_POINT ( 'NONE', ( 5.955700410381799300E-020, 3.904811560692509300, 75.00000000000004300 ) ) ; +#2634 = ORIENTED_EDGE ( 'NONE', *, *, #3128, .F. ) ; +#2635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2636 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996100, 3.749999999999993800, 77.50000000000002800 ) ) ; +#2637 = CIRCLE ( 'NONE', #1843, 5.050799999999998000 ) ; +#2638 = FACE_OUTER_BOUND ( 'NONE', #2190, .T. ) ; +#2639 = EDGE_CURVE ( 'NONE', #1211, #1086, #376, .T. ) ; +#2640 = CARTESIAN_POINT ( 'NONE', ( 0.3952279303505298900, 21.97443718698747300, 71.28794149408928100 ) ) ; +#2641 = CIRCLE ( 'NONE', #3353, 2.499999999999992900 ) ; +#2642 = VECTOR ( 'NONE', #2694, 1000.000000000000000 ) ; +#2643 = AXIS2_PLACEMENT_3D ( 'NONE', #2147, #103, #2498 ) ; +#2644 = LINE ( 'NONE', #2081, #1701 ) ; +#2645 = LINE ( 'NONE', #2651, #4257 ) ; +#2646 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 1.368900515068071300, 2.214659871272782300E-009 ) ) ; +#2647 = CARTESIAN_POINT ( 'NONE', ( 0.02772065198375973600, 4.645629774876383100, 75.37485200313476200 ) ) ; +#2648 = AXIS2_PLACEMENT_3D ( 'NONE', #3107, #1030, #3451 ) ; +#2649 = CIRCLE ( 'NONE', #277, 2.500000000000002200 ) ; +#2650 = AXIS2_PLACEMENT_3D ( 'NONE', #998, #3418, #1328 ) ; +#2651 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -13.00000000000000200, 0.0000000000000000000 ) ) ; +#2652 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.50000000000000400, 24.99999999999999600 ) ) ; +#2653 = CIRCLE ( 'NONE', #1443, 5.050800000000001500 ) ; +#2654 = ORIENTED_EDGE ( 'NONE', *, *, #3519, .T. ) ; +#2655 = EDGE_CURVE ( 'NONE', #91, #3760, #3126, .T. ) ; +#2656 = FACE_OUTER_BOUND ( 'NONE', #1626, .T. ) ; +#2657 = ORIENTED_EDGE ( 'NONE', *, *, #2490, .T. ) ; +#2658 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.49999999999999500, 41.29999999999999700 ) ) ; +#2659 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 6.440983307608447300, 1.337611122434706300 ) ) ; +#2660 = ORIENTED_EDGE ( 'NONE', *, *, #3723, .T. ) ; +#2661 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.469446951953616200E-015, 0.0000000000000000000 ) ) ; +#2662 = VERTEX_POINT ( 'NONE', #678 ) ; +#2663 = EDGE_CURVE ( 'NONE', #456, #3328, #3024, .T. ) ; +#2664 = CARTESIAN_POINT ( 'NONE', ( 2.263619595477908600, -11.15089450151528000, 0.8093687080758442700 ) ) ; +#2665 = VERTEX_POINT ( 'NONE', #29 ) ; +#2666 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2667 = ORIENTED_EDGE ( 'NONE', *, *, #4098, .F. ) ; +#2668 = EDGE_CURVE ( 'NONE', #212, #105, #1376, .T. ) ; +#2669 = ORIENTED_EDGE ( 'NONE', *, *, #586, .T. ) ; +#2670 = EDGE_LOOP ( 'NONE', ( #4290, #4377, #111, #252 ) ) ; +#2671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2672 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.550800000000003300, 67.00000000000002800 ) ) ; +#2673 = EDGE_LOOP ( 'NONE', ( #4152, #2012, #4365, #840, #3563, #2132 ) ) ; +#2674 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 8.357880429695134300, 8.366199177767457600 ) ) ; +#2675 = VERTEX_POINT ( 'NONE', #3482 ) ; +#2676 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 9.999999999999994700, 77.50000000000002800 ) ) ; +#2677 = EDGE_LOOP ( 'NONE', ( #1057, #482, #3059, #2475 ) ) ; +#2678 = EDGE_CURVE ( 'NONE', #3760, #719, #3837, .T. ) ; +#2679 = VECTOR ( 'NONE', #1417, 1000.000000000000000 ) ; +#2680 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#2681 = EDGE_CURVE ( 'NONE', #1308, #1896, #2084, .T. ) ; +#2682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2683 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 9.999999999999985800, 77.50000000000002800 ) ) ; +#2684 = CARTESIAN_POINT ( 'NONE', ( 7.931463254580364300E-013, 14.76225442993957800, 7.688901760586976900 ) ) ; +#2685 = FACE_OUTER_BOUND ( 'NONE', #1527, .T. ) ; +#2686 = FACE_OUTER_BOUND ( 'NONE', #680, .T. ) ; +#2687 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .T. ) ; +#2688 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2689 = EDGE_CURVE ( 'NONE', #2703, #1576, #270, .T. ) ; +#2690 = LINE ( 'NONE', #2381, #878 ) ; +#2691 = LINE ( 'NONE', #703, #1756 ) ; +#2692 = ADVANCED_FACE ( 'NONE', ( #3730 ), #1875, .F. ) ; +#2693 = VECTOR ( 'NONE', #2314, 1000.000000000000100 ) ; +#2694 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2695 = EDGE_CURVE ( 'NONE', #43, #795, #2795, .T. ) ; +#2696 = TOROIDAL_SURFACE ( 'NONE', #966, 1.249999999999992700, 1.250000000000000000 ) ; +#2697 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2698 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2699 = ORIENTED_EDGE ( 'NONE', *, *, #2713, .T. ) ; +#2700 = AXIS2_PLACEMENT_3D ( 'NONE', #3298, #1216, #3658 ) ; +#2701 = CIRCLE ( 'NONE', #2110, 5.000000000000000000 ) ; +#2702 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976806800E-016, -1.000000000000000000 ) ) ; +#2703 = VERTEX_POINT ( 'NONE', #1982 ) ; +#2704 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.500000000000005800, 67.00000000000002800 ) ) ; +#2705 = ORIENTED_EDGE ( 'NONE', *, *, #2414, .T. ) ; +#2706 = ORIENTED_EDGE ( 'NONE', *, *, #3575, .F. ) ; +#2707 = EDGE_CURVE ( 'NONE', #3704, #2617, #1977, .T. ) ; +#2708 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000000000, 3.749999999999972900, 77.50000000000002800 ) ) ; +#2709 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1429, #1128, #3904, #1807, #4223, #2168, #118, #2516, #461, #2877, #806, #3224, #1147, #3578, #1481, #3920, #1824, #4237, #2184, #135, #2532, #483, #2892, #822, #3240, #1161, #3597, #1495, #3934, #1840 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2.453269466693398600E-017, 0.0006418942535852430300, 0.001283788507170461600, 0.002567577014340921400, 0.003209471267926149300, 0.003851365521511377700, 0.004493259775096605300, 0.005135154028681834100, 0.005777048282267062100, 0.006418942535852288300, 0.007060836789437516200, 0.007702731043022744200, 0.008986519550193203600, 0.009628413803778428100, 0.01027030805736365300 ), + .UNSPECIFIED. ) ; +#2710 = VERTEX_POINT ( 'NONE', #3727 ) ; +#2711 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.50000000000000400, 6.299999999999995400 ) ) ; +#2712 = ORIENTED_EDGE ( 'NONE', *, *, #319, .F. ) ; +#2713 = EDGE_CURVE ( 'NONE', #1304, #3498, #174, .T. ) ; +#2714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2715 = ORIENTED_EDGE ( 'NONE', *, *, #238, .T. ) ; +#2716 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .F. ) ; +#2717 = VERTEX_POINT ( 'NONE', #3392 ) ; +#2718 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -5.431212450939743700, 11.12379794200893800 ) ) ; +#2719 = ORIENTED_EDGE ( 'NONE', *, *, #610, .F. ) ; +#2720 = EDGE_CURVE ( 'NONE', #195, #2624, #59, .T. ) ; +#2721 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996100, 4.999999999999993800, 80.00000000000002800 ) ) ; +#2722 = EDGE_LOOP ( 'NONE', ( #1522, #1609, #1617, #1628, #1657, #1671, #1678, #1717, #1729, #1780 ) ) ; +#2723 = ORIENTED_EDGE ( 'NONE', *, *, #1631, .T. ) ; +#2724 = AXIS2_PLACEMENT_3D ( 'NONE', #325, #2726, #664 ) ; +#2725 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2726 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2727 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999993500, 20.00000000000001800, 67.54999999999999700 ) ) ; +#2728 = ORIENTED_EDGE ( 'NONE', *, *, #1806, .T. ) ; +#2729 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 12.09557878785716800, 12.36719528706601100 ) ) ; +#2730 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.500000000000005800, 67.00000000000002800 ) ) ; +#2731 = EDGE_CURVE ( 'NONE', #2459, #894, #1186, .T. ) ; +#2732 = ADVANCED_FACE ( 'NONE', ( #2685 ), #3516, .F. ) ; +#2733 = LINE ( 'NONE', #1441, #1814 ) ; +#2734 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 71.93999999999999800 ) ) ; +#2735 = CYLINDRICAL_SURFACE ( 'NONE', #1456, 2.499999999999998700 ) ; +#2736 = ORIENTED_EDGE ( 'NONE', *, *, #979, .T. ) ; +#2737 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -25.00000000000001100, 72.50000000000001400 ) ) ; +#2738 = FACE_OUTER_BOUND ( 'NONE', #8, .T. ) ; +#2739 = LINE ( 'NONE', #2344, #4434 ) ; +#2740 = EDGE_CURVE ( 'NONE', #1797, #4357, #4390, .T. ) ; +#2741 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2742 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2743 = FACE_BOUND ( 'NONE', #2568, .T. ) ; +#2744 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884045300E-016, 1.838360317040486100, 5.121669133405593900 ) ) ; +#2745 = EDGE_CURVE ( 'NONE', #340, #3706, #3637, .T. ) ; +#2746 = LINE ( 'NONE', #2141, #3596 ) ; +#2747 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2748 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 68.75000000000002800 ) ) ; +#2749 = FACE_OUTER_BOUND ( 'NONE', #579, .T. ) ; +#2750 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996400, 2.081668171172168500E-014, 77.50000000000002800 ) ) ; +#2751 = ORIENTED_EDGE ( 'NONE', *, *, #2933, .F. ) ; +#2752 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2753 = ADVANCED_FACE ( 'NONE', ( #872 ), #2469, .T. ) ; +#2754 = VECTOR ( 'NONE', #2950, 1000.000000000000000 ) ; +#2755 = ORIENTED_EDGE ( 'NONE', *, *, #3575, .T. ) ; +#2756 = SECURITY_CLASSIFICATION ( '', '', #1834 ) ; +#2757 = PLANE ( 'NONE', #1888 ) ; +#2758 = EDGE_CURVE ( 'NONE', #2054, #400, #3401, .T. ) ; +#2759 = ORIENTED_EDGE ( 'NONE', *, *, #827, .F. ) ; +#2760 = VERTEX_POINT ( 'NONE', #1664 ) ; +#2761 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.50000000000000000, 2.500000000000000000 ) ) ; +#2762 = ORIENTED_EDGE ( 'NONE', *, *, #3524, .T. ) ; +#2763 = ORIENTED_EDGE ( 'NONE', *, *, #821, .T. ) ; +#2764 = EDGE_CURVE ( 'NONE', #2562, #1464, #4300, .T. ) ; +#2765 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884036700E-017 ) ) ; +#2766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2767 = AXIS2_PLACEMENT_3D ( 'NONE', #732, #4162, #2104 ) ; +#2768 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2769 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2770 = ORIENTED_EDGE ( 'NONE', *, *, #2681, .T. ) ; +#2771 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2772 = EDGE_LOOP ( 'NONE', ( #3222, #3789, #4143, #2023 ) ) ; +#2773 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2774 = EDGE_CURVE ( 'NONE', #2562, #891, #2593, .T. ) ; +#2775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2776 = ORIENTED_EDGE ( 'NONE', *, *, #293, .F. ) ; +#2777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#2778 = ORIENTED_EDGE ( 'NONE', *, *, #2218, .F. ) ; +#2779 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996100, 3.749999999999993300, 77.50000000000002800 ) ) ; +#2780 = ADVANCED_FACE ( 'NONE', ( #1547 ), #4427, .F. ) ; +#2781 = ORIENTED_EDGE ( 'NONE', *, *, #3824, .T. ) ; +#2782 = EDGE_CURVE ( 'NONE', #122, #3280, #3299, .T. ) ; +#2783 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -20.00000000000000700, 72.00000000000001400 ) ) ; +#2784 = PLANE ( 'NONE', #310 ) ; +#2785 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.550800000000003300, 67.00000000000002800 ) ) ; +#2786 = CARTESIAN_POINT ( 'NONE', ( 7.944210308004523300E-013, 22.99770416287430000, 24.27963556613334000 ) ) ; +#2787 = CARTESIAN_POINT ( 'NONE', ( 27.87668400489256000, 3.831174585581323700, 77.47367951980378100 ) ) ; +#2788 = AXIS2_PLACEMENT_3D ( 'NONE', #2404, #3793, #1036 ) ; +#2789 = AXIS2_PLACEMENT_3D ( 'NONE', #4416, #2390, #336 ) ; +#2790 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.220446049250313700E-014, 80.00000000000002800 ) ) ; +#2791 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2792 = PLANE ( 'NONE', #2377 ) ; +#2793 = VECTOR ( 'NONE', #2134, 1000.000000000000000 ) ; +#2794 = DATE_AND_TIME ( #3726, #171 ) ; +#2795 = CIRCLE ( 'NONE', #812, 5.050800000000001500 ) ; +#2796 = FACE_BOUND ( 'NONE', #3623, .T. ) ; +#2797 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000006800, 2.499999999999987100, 77.50000000000002800 ) ) ; +#2798 = EDGE_CURVE ( 'NONE', #839, #1529, #751, .T. ) ; +#2799 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -25.00000000000000700, 60.00000000000001400 ) ) ; +#2800 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2801 = VECTOR ( 'NONE', #3396, 1000.000000000000000 ) ; +#2802 = CYLINDRICAL_SURFACE ( 'NONE', #2899, 1.200000000000006600 ) ; +#2803 = PLANE ( 'NONE', #1002 ) ; +#2804 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2805 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.53863031928755200, 32.09600966508345700 ) ) ; +#2806 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -5.431212450939743700, 11.12379794200893800 ) ) ; +#2807 = EDGE_CURVE ( 'NONE', #3826, #952, #4186, .T. ) ; +#2808 = FACE_OUTER_BOUND ( 'NONE', #102, .T. ) ; +#2809 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 71.93999999999999800 ) ) ; +#2810 = ADVANCED_FACE ( 'NONE', ( #2355 ), #1322, .F. ) ; +#2811 = DIRECTION ( 'NONE', ( 1.224646799147352200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2812 = VECTOR ( 'NONE', #3218, 1000.000000000000000 ) ; +#2813 = ORIENTED_EDGE ( 'NONE', *, *, #1649, .F. ) ; +#2814 = EDGE_CURVE ( 'NONE', #1394, #3826, #2254, .T. ) ; +#2815 = ORIENTED_EDGE ( 'NONE', *, *, #1213, .F. ) ; +#2816 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2817 = FACE_OUTER_BOUND ( 'NONE', #2673, .T. ) ; +#2818 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.550800000000003300, 67.00000000000002800 ) ) ; +#2819 = ORIENTED_EDGE ( 'NONE', *, *, #3590, .F. ) ; +#2820 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 24.54036932459355900, 32.11157974433540100 ) ) ; +#2821 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.50000000000000400, 23.79999999999999700 ) ) ; +#2822 = CARTESIAN_POINT ( 'NONE', ( 1.014649974264213700, 4.789022263536007400, 77.01803210429866900 ) ) ; +#2823 = ORIENTED_EDGE ( 'NONE', *, *, #2938, .T. ) ; +#2824 = PLANE ( 'NONE', #496 ) ; +#2825 = PLANE ( 'NONE', #1988 ) ; +#2826 = AXIS2_PLACEMENT_3D ( 'NONE', #1703, #4120, #2058 ) ; +#2827 = ORIENTED_EDGE ( 'NONE', *, *, #1712, .F. ) ; +#2828 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.469446951953616200E-015, -0.0000000000000000000 ) ) ; +#2829 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #723, #2431, #3490, #1399 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384688800, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243648300, 0.8047378541243648300, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2830 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2831 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -20.00000000000001100, 72.50000000000001400 ) ) ; +#2832 = ORIENTED_EDGE ( 'NONE', *, *, #898, .T. ) ; +#2833 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2834 = EDGE_CURVE ( 'NONE', #1567, #159, #3189, .T. ) ; +#2835 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#2836 = ORIENTED_EDGE ( 'NONE', *, *, #686, .F. ) ; +#2837 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.250000000000000200, 75.00000000000002800 ) ) ; +#2838 = ORIENTED_EDGE ( 'NONE', *, *, #2998, .F. ) ; +#2839 = ADVANCED_FACE ( 'NONE', ( #4076 ), #2149, .F. ) ; +#2840 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.50000000000000000, 2.500000000000000000 ) ) ; +#2841 = ORIENTED_EDGE ( 'NONE', *, *, #1435, .T. ) ; +#2842 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 17.11907720567298700, 22.15261407433706300 ) ) ; +#2843 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 1.250000000000021100, 75.00000000000002800 ) ) ; +#2844 = EDGE_CURVE ( 'NONE', #1566, #3071, #3074, .T. ) ; +#2845 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2846 = ORIENTED_EDGE ( 'NONE', *, *, #1013, .T. ) ; +#2847 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2848 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999973400, 77.50000000000002800 ) ) ; +#2849 = ADVANCED_FACE ( 'NONE', ( #3992 ), #2973, .F. ) ; +#2850 = ORIENTED_EDGE ( 'NONE', *, *, #1240, .F. ) ; +#2851 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -5.000000000000020400, 77.50000000000002800 ) ) ; +#2852 = ORIENTED_EDGE ( 'NONE', *, *, #3191, .F. ) ; +#2853 = EDGE_CURVE ( 'NONE', #3071, #3869, #317, .T. ) ; +#2854 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, -20.00000000000000400, 4.336808689942014800E-016 ) ) ; +#2855 = ORIENTED_EDGE ( 'NONE', *, *, #1007, .F. ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.550800000000003300, 67.00000000000002800 ) ) ; +#2857 = CARTESIAN_POINT ( 'NONE', ( 0.6698729810778068000, -10.50000000000000000, 2.500000000000000000 ) ) ; +#2858 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.550799999999994400, 67.00000000000002800 ) ) ; +#2859 = CIRCLE ( 'NONE', #295, 0.5000000000000004400 ) ; +#2860 = VERTEX_POINT ( 'NONE', #2439 ) ; +#2861 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2862 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.44194693073620100, 14.82416756827213300 ) ) ; +#2863 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -20.00000000000000700, 72.50000000000001400 ) ) ; +#2864 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2865 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2866 = FACE_OUTER_BOUND ( 'NONE', #3893, .T. ) ; +#2867 = VECTOR ( 'NONE', #2771, 1000.000000000000000 ) ; +#2868 = AXIS2_PLACEMENT_3D ( 'NONE', #421, #2830, #767 ) ; +#2869 = AXIS2_PLACEMENT_3D ( 'NONE', #2003, #4399, #2351 ) ; +#2870 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999300, -1.309716224362489200E-014, 78.75000000000002800 ) ) ; +#2871 = ADVANCED_FACE ( 'NONE', ( #3897 ), #1740, .T. ) ; +#2872 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#2873 = FACE_OUTER_BOUND ( 'NONE', #1593, .T. ) ; +#2874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2875 = LINE ( 'NONE', #1177, #126 ) ; +#2876 = CARTESIAN_POINT ( 'NONE', ( 0.1651796656624523700, 0.003928704951172866000, 76.14100086755210800 ) ) ; +#2877 = CARTESIAN_POINT ( 'NONE', ( 29.17182677513343900, 22.75929052279958900, 67.13644947470372400 ) ) ; +#2878 = FACE_BOUND ( 'NONE', #887, .T. ) ; +#2879 = EDGE_CURVE ( 'NONE', #3274, #25, #1129, .T. ) ; +#2880 = AXIS2_PLACEMENT_3D ( 'NONE', #1062, #1080, #3509 ) ; +#2881 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 17.62432624795728500, 11.62329991236551100 ) ) ; +#2882 = VECTOR ( 'NONE', #1455, 1000.000000000000000 ) ; +#2883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2884 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2885 = EDGE_CURVE ( 'NONE', #3315, #2860, #1224, .T. ) ; +#2886 = FACE_OUTER_BOUND ( 'NONE', #1800, .T. ) ; +#2887 = APPROVAL_ROLE ( '' ) ; +#2888 = EDGE_LOOP ( 'NONE', ( #3659, #4423 ) ) ; +#2889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#2890 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999300, 6.135086369950145400, 6.758080206860219300 ) ) ; +#2891 = LINE ( 'NONE', #4295, #143 ) ; +#2892 = CARTESIAN_POINT ( 'NONE', ( 29.38566074209152000, 22.40666209904683000, 70.85374851556238700 ) ) ; +#2893 = EDGE_CURVE ( 'NONE', #340, #4018, #221, .T. ) ; +#2894 = VERTEX_POINT ( 'NONE', #3864 ) ; +#2895 = ADVANCED_FACE ( 'NONE', ( #2866 ), #3682, .F. ) ; +#2896 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, 25.00100000000000800, 60.00000000000002100 ) ) ; +#2897 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 9.395604526106280800, 9.296555421264217900 ) ) ; +#2898 = EDGE_LOOP ( 'NONE', ( #3241, #3271, #3291, #3371 ) ) ; +#2899 = AXIS2_PLACEMENT_3D ( 'NONE', #671, #3094, #4110 ) ; +#2900 = AXIS2_PLACEMENT_3D ( 'NONE', #268, #2317, #943 ) ; +#2901 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, -2.168404344971001200E-016 ) ) ; +#2902 = ORIENTED_EDGE ( 'NONE', *, *, #2947, .F. ) ; +#2903 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -25.00000000000000700, 61.20000000000001700 ) ) ; +#2904 = CARTESIAN_POINT ( 'NONE', ( 0.8977845827712948000, 22.86036640551386900, 67.32263296979235200 ) ) ; +#2905 = ORIENTED_EDGE ( 'NONE', *, *, #1951, .F. ) ; +#2906 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2907 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 16.47827936852107200, 20.42927200080716300 ) ) ; +#2908 = ORIENTED_EDGE ( 'NONE', *, *, #2103, .F. ) ; +#2909 = EDGE_CURVE ( 'NONE', #2860, #4250, #433, .T. ) ; +#2910 = EDGE_LOOP ( 'NONE', ( #4418, #435, #2289, #956 ) ) ; +#2911 = VERTEX_POINT ( 'NONE', #1105 ) ; +#2912 = CARTESIAN_POINT ( 'NONE', ( 29.36385346292397400, 0.07981904894766679600, 76.67517769544262800 ) ) ; +#2913 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 9.709165030648835100, 3.102268191725510200 ) ) ; +#2914 = ORIENTED_EDGE ( 'NONE', *, *, #3293, .F. ) ; +#2915 = EDGE_CURVE ( 'NONE', #3869, #2565, #1923, .T. ) ; +#2916 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2917 = ORIENTED_EDGE ( 'NONE', *, *, #3612, .T. ) ; +#2918 = CARTESIAN_POINT ( 'NONE', ( 2.550383384147269700E-016, 9.999999999999978700, 75.00000000000002800 ) ) ; +#2919 = EDGE_CURVE ( 'NONE', #3328, #1118, #2733, .T. ) ; +#2920 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999973400, 77.50000000000002800 ) ) ; +#2921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#2922 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2923 = PERSON_AND_ORGANIZATION ( #1892, #3247 ) ; +#2924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2925 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 5.245319307689134000, 0.8779430579073309600 ) ) ; +#2926 = VECTOR ( 'NONE', #3146, 1000.000000000000000 ) ; +#2927 = CYLINDRICAL_SURFACE ( 'NONE', #3499, 1.200000000000006600 ) ; +#2928 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2929 = DIRECTION ( 'NONE', ( 2.081668171172168500E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2930 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999300, -1.309716224362489200E-014, 76.25000000000002800 ) ) ; +#2931 = LINE ( 'NONE', #4068, #2801 ) ; +#2932 = VECTOR ( 'NONE', #3820, 1000.000000000000000 ) ; +#2933 = EDGE_CURVE ( 'NONE', #2565, #3149, #120, .T. ) ; +#2934 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.50000000000000000, 1.257674520083185300E-015 ) ) ; +#2935 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.00000000000000000, 40.00000000000002800 ) ) ; +#2936 = FACE_BOUND ( 'NONE', #2223, .T. ) ; +#2937 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2938 = EDGE_CURVE ( 'NONE', #1211, #3553, #3579, .T. ) ; +#2939 = CIRCLE ( 'NONE', #1268, 1.250000000000001100 ) ; +#2940 = CARTESIAN_POINT ( 'NONE', ( 1.007459532398796700, 0.2079611327021042000, 77.01249153920434800 ) ) ; +#2941 = ORIENTED_EDGE ( 'NONE', *, *, #2707, .F. ) ; +#2942 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.4633836320495728900, 5.000000000215832700 ) ) ; +#2943 = LINE ( 'NONE', #946, #3745 ) ; +#2944 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, -5.000000000000022200, 80.00000000000002800 ) ) ; +#2945 = CARTESIAN_POINT ( 'NONE', ( 25.80335629577948400, -12.43350570009890200, 0.06082540590623427400 ) ) ; +#2946 = EDGE_LOOP ( 'NONE', ( #1101, #3747 ) ) ; +#2947 = EDGE_CURVE ( 'NONE', #952, #4013, #4428, .T. ) ; +#2948 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.178938284644431100E-016, 1.000000000000000000 ) ) ; +#2949 = ORIENTED_EDGE ( 'NONE', *, *, #3160, .T. ) ; +#2950 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2951 = ORIENTED_EDGE ( 'NONE', *, *, #485, .F. ) ; +#2952 = EDGE_CURVE ( 'NONE', #1907, #3538, #815, .T. ) ; +#2953 = ORIENTED_EDGE ( 'NONE', *, *, #2695, .F. ) ; +#2954 = VERTEX_POINT ( 'NONE', #2870 ) ; +#2955 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2956 = AXIS2_PLACEMENT_3D ( 'NONE', #2367, #991, #656 ) ; +#2957 = ORIENTED_EDGE ( 'NONE', *, *, #3982, .T. ) ; +#2958 = VERTEX_POINT ( 'NONE', #801 ) ; +#2959 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2960 = ORIENTED_EDGE ( 'NONE', *, *, #1519, .F. ) ; +#2961 = EDGE_LOOP ( 'NONE', ( #1853, #2964, #1249, #3868 ) ) ; +#2962 = EDGE_CURVE ( 'NONE', #1567, #580, #1588, .T. ) ; +#2963 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.178938284644431100E-016, -1.000000000000000000 ) ) ; +#2964 = ORIENTED_EDGE ( 'NONE', *, *, #3687, .T. ) ; +#2965 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.982541115402065100E-016, 1.000000000000000000 ) ) ; +#2966 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.000000000000020400, 75.00000000000002800 ) ) ; +#2967 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.991006225469872600, 21.20617812313072600 ) ) ; +#2968 = EDGE_CURVE ( 'NONE', #3538, #994, #2637, .T. ) ; +#2969 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.00000000000001100, 5.204170427930424400E-015 ) ) ; +#2970 = CIRCLE ( 'NONE', #4020, 1.199999999999999700 ) ; +#2971 = VERTEX_POINT ( 'NONE', #3913 ) ; +#2972 = EDGE_CURVE ( 'NONE', #994, #1999, #3343, .T. ) ; +#2973 = CYLINDRICAL_SURFACE ( 'NONE', #405, 5.050799999999994400 ) ; +#2974 = FACE_OUTER_BOUND ( 'NONE', #3812, .T. ) ; +#2975 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.673617379884036700E-017, 1.000000000000000000 ) ) ; +#2976 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 2.500000000000005800, 67.00000000000002800 ) ) ; +#2977 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2978 = FACE_BOUND ( 'NONE', #4002, .T. ) ; +#2979 = LINE ( 'NONE', #2566, #1230 ) ; +#2980 = AXIS2_PLACEMENT_3D ( 'NONE', #2391, #337, #2741 ) ; +#2981 = CARTESIAN_POINT ( 'NONE', ( 1.206091987257273300E-015, 1.301042606982605300E-015, 76.25000000000002800 ) ) ; +#2982 = FACE_OUTER_BOUND ( 'NONE', #3101, .T. ) ; +#2983 = FACE_OUTER_BOUND ( 'NONE', #1623, .T. ) ; +#2984 = EDGE_CURVE ( 'NONE', #3280, #122, #2533, .T. ) ; +#2985 = ORIENTED_EDGE ( 'NONE', *, *, #3342, .F. ) ; +#2986 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999998400, -14.99999999999998000, 67.55000000000002600 ) ) ; +#2987 = LINE ( 'NONE', #1060, #1148 ) ; +#2988 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#2989 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 31.81000000000000600 ) ) ; +#2990 = ORIENTED_EDGE ( 'NONE', *, *, #1936, .F. ) ; +#2991 = PLANE ( 'NONE', #2233 ) ; +#2992 = EDGE_CURVE ( 'NONE', #4250, #3278, #4246, .T. ) ; +#2993 = VECTOR ( 'NONE', #209, 1000.000000000000000 ) ; +#2994 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2995 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#2996 = ORIENTED_EDGE ( 'NONE', *, *, #3489, .T. ) ; +#2997 = CARTESIAN_POINT ( 'NONE', ( 0.6868737448631457900, 22.53273858465122400, 70.69999096118785100 ) ) ; +#2998 = EDGE_CURVE ( 'NONE', #4022, #2581, #4341, .T. ) ; +#2999 = ORIENTED_EDGE ( 'NONE', *, *, #1921, .F. ) ; +#3000 = ORIENTED_EDGE ( 'NONE', *, *, #3342, .T. ) ; +#3001 = ORIENTED_EDGE ( 'NONE', *, *, #3649, .T. ) ; +#3002 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -25.00000000000000000, -3.252606517456512900E-015 ) ) ; +#3003 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 1.838360316948045800, 5.121669133908725700 ) ) ; +#3004 = EDGE_LOOP ( 'NONE', ( #2068, #2621, #2006, #1301 ) ) ; +#3005 = CARTESIAN_POINT ( 'NONE', ( 0.06068526325127178400, 4.788359540826988300, 75.55091053768381900 ) ) ; +#3006 = ORIENTED_EDGE ( 'NONE', *, *, #1600, .T. ) ; +#3007 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 20.00000000000001800, 68.75000000000000000 ) ) ; +#3008 = EDGE_LOOP ( 'NONE', ( #2009, #2827, #3485, #4017, #4099 ) ) ; +#3009 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1545, #4249, ( #2756 ) ) ; +#3010 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3011 = ORIENTED_EDGE ( 'NONE', *, *, #2452, .F. ) ; +#3012 = EDGE_CURVE ( 'NONE', #1104, #891, #1496, .T. ) ; +#3013 = ORIENTED_EDGE ( 'NONE', *, *, #3413, .F. ) ; +#3014 = ORIENTED_EDGE ( 'NONE', *, *, #2035, .T. ) ; +#3015 = CARTESIAN_POINT ( 'NONE', ( 10.49999999999999800, -25.00000000000000700, 55.00000000000000700 ) ) ; +#3016 = EDGE_CURVE ( 'NONE', #1999, #2295, #2299, .T. ) ; +#3017 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -14.99999999999998000, 69.95000000000003100 ) ) ; +#3018 = CARTESIAN_POINT ( 'NONE', ( 1.995414508871195100E-013, 7.017477517280729800, 1.596934448639146600 ) ) ; +#3019 = CARTESIAN_POINT ( 'NONE', ( 29.74776692697528100, 4.987243147919484100, 76.09432346314797300 ) ) ; +#3020 = CARTESIAN_POINT ( 'NONE', ( 1.728794917594790500, -10.85017610573816800, 1.211416679862384400 ) ) ; +#3021 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3022 = FACE_BOUND ( 'NONE', #334, .T. ) ; +#3023 = EDGE_CURVE ( 'NONE', #456, #2971, #4124, .T. ) ; +#3024 = CIRCLE ( 'NONE', #127, 3.189999999999998600 ) ; +#3025 = CIRCLE ( 'NONE', #2086, 1.199999999999999700 ) ; +#3026 = EDGE_CURVE ( 'NONE', #1086, #1735, #1371, .T. ) ; +#3027 = FACE_OUTER_BOUND ( 'NONE', #4088, .T. ) ; +#3028 = CYLINDRICAL_SURFACE ( 'NONE', #970, 2.500000000000002200 ) ; +#3029 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#3030 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -4.991006225469872600, 21.20617812313072600 ) ) ; +#3031 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 11.56313197967515700, 4.526941316407305600 ) ) ; +#3032 = AXIS2_PLACEMENT_3D ( 'NONE', #727, #3142, #1066 ) ; +#3033 = FACE_OUTER_BOUND ( 'NONE', #3037, .T. ) ; +#3034 = AXIS2_PLACEMENT_3D ( 'NONE', #936, #3357, #1267 ) ; +#3035 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000005800, 72.05080000000002400 ) ) ; +#3036 = CIRCLE ( 'NONE', #1144, 1.200000000000006600 ) ; +#3037 = EDGE_LOOP ( 'NONE', ( #1952, #2762 ) ) ; +#3038 = EDGE_CURVE ( 'NONE', #3553, #1251, #3122, .T. ) ; +#3039 = VECTOR ( 'NONE', #71, 1000.000000000000000 ) ; +#3040 = ORIENTED_EDGE ( 'NONE', *, *, #2603, .F. ) ; +#3041 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3042 = PLANE ( 'NONE', #1327 ) ; +#3043 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 12.09557878810418600, 12.36719528683973700 ) ) ; +#3044 = ADVANCED_FACE ( 'NONE', ( #497, #1269, #3949, #3022, #2078, #1185 ), #1048, .F. ) ; +#3045 = EDGE_LOOP ( 'NONE', ( #2819, #2905, #2917, #2953 ) ) ; +#3046 = ORIENTED_EDGE ( 'NONE', *, *, #1503, .T. ) ; +#3047 = ORIENTED_EDGE ( 'NONE', *, *, #3612, .F. ) ; +#3048 = EDGE_CURVE ( 'NONE', #1394, #4013, #3833, .T. ) ; +#3049 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247688800, 4.987243147919475200, 76.09432346314807200 ) ) ; +#3050 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, -5.000000000000022200, 75.00000000000002800 ) ) ; +#3051 = ORIENTED_EDGE ( 'NONE', *, *, #1494, .T. ) ; +#3052 = VERTEX_POINT ( 'NONE', #379 ) ; +#3053 = EDGE_CURVE ( 'NONE', #2067, #4116, #2829, .T. ) ; +#3054 = ORIENTED_EDGE ( 'NONE', *, *, #2655, .F. ) ; +#3055 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3056 = ORIENTED_EDGE ( 'NONE', *, *, #2420, .F. ) ; +#3057 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3058 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#3059 = ORIENTED_EDGE ( 'NONE', *, *, #1171, .T. ) ; +#3060 = AXIS2_PLACEMENT_3D ( 'NONE', #1222, #2609, #893 ) ; +#3061 = EDGE_LOOP ( 'NONE', ( #3388, #3625, #4028, #3483 ) ) ; +#3062 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -25.00000000000001100, 72.00000000000001400 ) ) ; +#3063 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -4.991006225469872600, 21.20617812313072600 ) ) ; +#3064 = ORIENTED_EDGE ( 'NONE', *, *, #4218, .F. ) ; +#3065 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3066 = EDGE_CURVE ( 'NONE', #1624, #580, #1061, .T. ) ; +#3067 = ADVANCED_FACE ( 'NONE', ( #170 ), #2449, .F. ) ; +#3068 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3069 = FACE_OUTER_BOUND ( 'NONE', #2910, .T. ) ; +#3070 = EDGE_CURVE ( 'NONE', #2067, #4159, #1872, .T. ) ; +#3071 = VERTEX_POINT ( 'NONE', #1752 ) ; +#3072 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3073 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -111.7867742303483900, 30.56889037156613400 ) ) ; +#3074 = LINE ( 'NONE', #3481, #1439 ) ; +#3075 = LINE ( 'NONE', #1223, #3993 ) ; +#3076 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -107.4621125123532700, 80.00000000000001400 ) ) ; +#3077 = VERTEX_POINT ( 'NONE', #69 ) ; +#3078 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884034500E-016, 19.57519049198167200, 32.71979939424174700 ) ) ; +#3079 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3080 = EDGE_CURVE ( 'NONE', #3806, #677, #3631, .T. ) ; +#3081 = VECTOR ( 'NONE', #2988, 1000.000000000000000 ) ; +#3082 = LINE ( 'NONE', #495, #4083 ) ; +#3083 = VECTOR ( 'NONE', #3423, 1000.000000000000000 ) ; +#3084 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -107.4621125123532700, 79.99999999999998600 ) ) ; +#3085 = FACE_BOUND ( 'NONE', #4375, .T. ) ; +#3086 = ADVANCED_FACE ( 'NONE', ( #964 ), #413, .F. ) ; +#3087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 7.625158136161789500E-017, -1.000000000000000000 ) ) ; +#3088 = AXIS2_PLACEMENT_3D ( 'NONE', #3899, #785, #4217 ) ; +#3089 = AXIS2_PLACEMENT_3D ( 'NONE', #2017, #4409, #2365 ) ; +#3090 = LINE ( 'NONE', #2761, #2170 ) ; +#3091 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884034500E-016, 10.35376321653043900, 10.25432647431648200 ) ) ; +#3092 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3093 = EDGE_LOOP ( 'NONE', ( #2271, #4141, #219 ) ) ; +#3094 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3095 = CIRCLE ( 'NONE', #134, 1.200000000000006600 ) ; +#3096 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 31.81000000000000600 ) ) ; +#3097 = EDGE_LOOP ( 'NONE', ( #1246, #1260, #1294, #1337, #1359, #1407, #1422, #1427, #1460, #1484 ) ) ; +#3098 = EDGE_CURVE ( 'NONE', #3280, #150, #1972, .T. ) ; +#3099 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -22.50000000000000000, 10.00000000000000700 ) ) ; +#3100 = ORIENTED_EDGE ( 'NONE', *, *, #855, .T. ) ; +#3101 = EDGE_LOOP ( 'NONE', ( #2823, #3750, #1998, #2949, #289, #1293, #523, #3268 ) ) ; +#3102 = EDGE_CURVE ( 'NONE', #3974, #1469, #1743, .T. ) ; +#3103 = ORIENTED_EDGE ( 'NONE', *, *, #2745, .F. ) ; +#3104 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.710505431213761500E-015, 5.000000000000000000 ) ) ; +#3105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.301042606982605100E-016, 1.000000000000000000 ) ) ; +#3106 = ORIENTED_EDGE ( 'NONE', *, *, #3723, .F. ) ; +#3107 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -20.00000000000001100, 60.00000000000001400 ) ) ; +#3108 = VERTEX_POINT ( 'NONE', #2840 ) ; +#3109 = ADVANCED_FACE ( 'NONE', ( #3508 ), #868, .T. ) ; +#3110 = EDGE_CURVE ( 'NONE', #1584, #2581, #53, .T. ) ; +#3111 = ORIENTED_EDGE ( 'NONE', *, *, #1233, .F. ) ; +#3112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3113 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781441900E-015, 0.0000000000000000000 ) ) ; +#3114 = ORIENTED_EDGE ( 'NONE', *, *, #3671, .F. ) ; +#3115 = VERTEX_POINT ( 'NONE', #88 ) ; +#3116 = AXIS2_PLACEMENT_3D ( 'NONE', #1044, #3469, #1375 ) ; +#3117 = AXIS2_PLACEMENT_3D ( 'NONE', #1613, #4041, #1969 ) ; +#3118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9961946980917455500, -0.08715574274765829100 ) ) ; +#3119 = ORIENTED_EDGE ( 'NONE', *, *, #1373, .F. ) ; +#3120 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.602085213965210100E-016 ) ) ; +#3121 = EDGE_CURVE ( 'NONE', #3381, #3806, #4297, .T. ) ; +#3122 = LINE ( 'NONE', #3123, #371 ) ; +#3123 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -13.00000000000000200, 0.0000000000000000000 ) ) ; +#3124 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3125 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 19.45908431958955400, 14.78271232618363700 ) ) ; +#3126 = CIRCLE ( 'NONE', #2267, 5.050799999999998000 ) ; +#3127 = CYLINDRICAL_SURFACE ( 'NONE', #2571, 2.500000000000002200 ) ; +#3128 = EDGE_CURVE ( 'NONE', #2971, #1118, #1637, .T. ) ; +#3129 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.301042606982605100E-016 ) ) ; +#3130 = ADVANCED_FACE ( 'NONE', ( #2588 ), #2464, .T. ) ; +#3131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3132 = LINE ( 'NONE', #951, #1189 ) ; +#3133 = LINE ( 'NONE', #4081, #4040 ) ; +#3134 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 69.95000000000001700 ) ) ; +#3135 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999998400, -14.99999999999998000, 71.94000000000002600 ) ) ; +#3136 = EDGE_CURVE ( 'NONE', #2627, #4116, #633, .T. ) ; +#3137 = LINE ( 'NONE', #187, #2215 ) ; +#3138 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.387778780781446500E-015, 0.0000000000000000000 ) ) ; +#3139 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3140 = LINE ( 'NONE', #4156, #1196 ) ; +#3141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.178938284644431100E-016, -1.000000000000000000 ) ) ; +#3142 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3143 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 18.60625197656992200, 27.34528313591971500 ) ) ; +#3144 = VERTEX_POINT ( 'NONE', #1450 ) ; +#3145 = CARTESIAN_POINT ( 'NONE', ( 27.64618450549182100, 3.360240897423430400, 77.49674497874247000 ) ) ; +#3146 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.347358039593635500E-016, 1.000000000000000000 ) ) ; +#3147 = LINE ( 'NONE', #3634, #2221 ) ; +#3148 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 9.999999999999994700, 80.00000000000002800 ) ) ; +#3149 = VERTEX_POINT ( 'NONE', #123 ) ; +#3150 = EDGE_CURVE ( 'NONE', #3381, #3329, #1430, .T. ) ; +#3151 = EDGE_LOOP ( 'NONE', ( #2836, #203, #297, #409, #532 ) ) ; +#3152 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3153 = ORIENTED_EDGE ( 'NONE', *, *, #3444, .F. ) ; +#3154 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.991006225469872600, 16.15537812313072400 ) ) ; +#3155 = ADVANCED_FACE ( 'NONE', ( #1544 ), #3182, .F. ) ; +#3156 = ORIENTED_EDGE ( 'NONE', *, *, #1031, .T. ) ; +#3157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3158 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.550799999999995300, 15.49999999999998400 ) ) ; +#3159 = ORIENTED_EDGE ( 'NONE', *, *, #1188, .T. ) ; +#3160 = EDGE_CURVE ( 'NONE', #3441, #3940, #747, .T. ) ; +#3161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3162 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, 2.676334498985062800, 77.50000000000002800 ) ) ; +#3163 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 24.90785664173685600, 36.03322735706336000 ) ) ; +#3164 = EDGE_LOOP ( 'NONE', ( #1203, #1561, #4150, #1673 ) ) ; +#3165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3166 = ORIENTED_EDGE ( 'NONE', *, *, #2014, .F. ) ; +#3167 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3168 = ORIENTED_EDGE ( 'NONE', *, *, #3598, .T. ) ; +#3169 = EDGE_CURVE ( 'NONE', #2044, #3230, #194, .T. ) ; +#3170 = EDGE_LOOP ( 'NONE', ( #2716, #2182 ) ) ; +#3171 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -25.00000000000000700, 55.50000000000000700 ) ) ; +#3172 = VERTEX_POINT ( 'NONE', #2186 ) ; +#3173 = EDGE_LOOP ( 'NONE', ( #1571, #1344, #3975, #3935 ) ) ; +#3174 = EDGE_CURVE ( 'NONE', #4066, #2954, #2250, .T. ) ; +#3175 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 24.26528369103056100, 30.16223170877970400 ) ) ; +#3176 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.50000000000000400, 7.499999999999996400 ) ) ; +#3177 = CARTESIAN_POINT ( 'NONE', ( 0.6361465370759465900, 4.920180951052324200, 76.67517769544252800 ) ) ; +#3178 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, -25.00000000000000700, 58.80000000000000400 ) ) ; +#3179 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -2.550799999999991700, 79.99999999999997200 ) ) ; +#3180 = ADVANCED_FACE ( 'NONE', ( #1317 ), #3615, .F. ) ; +#3181 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 20.00000000000001800, 69.95000000000001700 ) ) ; +#3182 = CYLINDRICAL_SURFACE ( 'NONE', #6, 3.189999999999998600 ) ; +#3183 = LOCAL_TIME ( 15, 7, 17.00000000000000000, #4074 ) ; +#3184 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3185 = VERTEX_POINT ( 'NONE', #4274 ) ; +#3186 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#3187 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000006800, 2.499999999999987100, 78.75000000000002800 ) ) ; +#3188 = ADVANCED_FACE ( 'NONE', ( #3069 ), #2144, .F. ) ; +#3189 = CIRCLE ( 'NONE', #875, 1.200000000000006600 ) ; +#3190 = FACE_OUTER_BOUND ( 'NONE', #2127, .T. ) ; +#3191 = EDGE_CURVE ( 'NONE', #1410, #2703, #3390, .T. ) ; +#3192 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#3193 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 21.84171778434028600, 20.50719136643451200 ) ) ; +#3194 = FACE_OUTER_BOUND ( 'NONE', #2196, .T. ) ; +#3195 = FACE_BOUND ( 'NONE', #2243, .T. ) ; +#3196 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996400, 1.250000000000021100, 77.50000000000002800 ) ) ; +#3197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3198 = EDGE_CURVE ( 'NONE', #4018, #340, #426, .T. ) ; +#3199 = LINE ( 'NONE', #4071, #1330 ) ; +#3200 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000005800, 67.00000000000002800 ) ) ; +#3201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884036700E-017 ) ) ; +#3202 = FACE_OUTER_BOUND ( 'NONE', #1856, .T. ) ; +#3203 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3204 = AXIS2_PLACEMENT_3D ( 'NONE', #2934, #864, #3279 ) ; +#3205 = ADVANCED_FACE ( 'NONE', ( #3990 ), #3890, .F. ) ; +#3206 = LINE ( 'NONE', #3991, #1336 ) ; +#3207 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.749999999999972900, 77.50000000000002800 ) ) ; +#3208 = ORIENTED_EDGE ( 'NONE', *, *, #923, .T. ) ; +#3209 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 14.32628528001087900, 15.86888990909237800 ) ) ; +#3210 = CARTESIAN_POINT ( 'NONE', ( 29.81499345864845900, 4.969384845651370100, 75.95623853707360200 ) ) ; +#3211 = AXIS2_PLACEMENT_3D ( 'NONE', #1354, #3797, #1698 ) ; +#3212 = PLANE ( 'NONE', #1542 ) ; +#3213 = CYLINDRICAL_SURFACE ( 'NONE', #162, 0.5000000000000004400 ) ; +#3214 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999995700, 4.999999999999993800, 75.00000000000002800 ) ) ; +#3215 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, -5.000000000000022200, 77.50000000000002800 ) ) ; +#3216 = ORIENTED_EDGE ( 'NONE', *, *, #3674, .T. ) ; +#3217 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, 25.00100000000000800, 58.80000000000001100 ) ) ; +#3218 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3219 = EDGE_LOOP ( 'NONE', ( #3327, #4109 ) ) ; +#3220 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -20.00000000000001800, 80.00000000000000000 ) ) ; +#3221 = EDGE_CURVE ( 'NONE', #3115, #1425, #1220, .T. ) ; +#3222 = ORIENTED_EDGE ( 'NONE', *, *, #3308, .F. ) ; +#3223 = ORIENTED_EDGE ( 'NONE', *, *, #1712, .T. ) ; +#3224 = CARTESIAN_POINT ( 'NONE', ( 28.98816351304154900, 23.01735854050027200, 67.69444712709011500 ) ) ; +#3225 = ORIENTED_EDGE ( 'NONE', *, *, #3808, .F. ) ; +#3226 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3227 = VERTEX_POINT ( 'NONE', #555 ) ; +#3228 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999300, 16.75255062754624500, 10.28120998328115100 ) ) ; +#3229 = EDGE_CURVE ( 'NONE', #3704, #83, #2970, .T. ) ; +#3230 = VERTEX_POINT ( 'NONE', #2253 ) ; +#3231 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.249999999999999600, 77.50000000000002800 ) ) ; +#3232 = ORIENTED_EDGE ( 'NONE', *, *, #590, .F. ) ; +#3233 = ADVANCED_FACE ( 'NONE', ( #313 ), #3771, .T. ) ; +#3234 = DATE_TIME_ROLE ( 'creation_date' ) ; +#3235 = ORIENTED_EDGE ( 'NONE', *, *, #3710, .F. ) ; +#3236 = EDGE_CURVE ( 'NONE', #3346, #4411, #217, .T. ) ; +#3237 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -22.90000000000000200, 33.80000000000000400 ) ) ; +#3238 = EDGE_LOOP ( 'NONE', ( #2667, #2699, #2715, #2763 ) ) ; +#3239 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000700, 8.375049528982964700, 8.357325211129335700 ) ) ; +#3240 = CARTESIAN_POINT ( 'NONE', ( 29.74128553776462200, 21.63736119553603000, 71.52004518000015300 ) ) ; +#3241 = ORIENTED_EDGE ( 'NONE', *, *, #3674, .F. ) ; +#3242 = CARTESIAN_POINT ( 'NONE', ( 27.59081432856974900, 1.809992578160929400, 77.49861212917967600 ) ) ; +#3243 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 12.85854786524072300, 5.688382850208903100 ) ) ; +#3244 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.059793774530124900, 10.46841981887819800 ) ) ; +#3245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3246 = VECTOR ( 'NONE', #2048, 1000.000000000000000 ) ; +#3247 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#3248 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #2353, #2193, ( #2756 ) ) ; +#3249 = CARTESIAN_POINT ( 'NONE', ( 0.6880567166460054300, 22.53475648087661700, 66.80258952877407800 ) ) ; +#3250 = EDGE_CURVE ( 'NONE', #150, #2958, #1124, .T. ) ; +#3251 = CIRCLE ( 'NONE', #2980, 5.000000000000000900 ) ; +#3252 = VECTOR ( 'NONE', #4426, 1000.000000000000000 ) ; +#3253 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 17.41092094976971400, 23.01925579634536600 ) ) ; +#3254 = VECTOR ( 'NONE', #760, 1000.000000000000000 ) ; +#3255 = CIRCLE ( 'NONE', #1201, 0.5000000000000004400 ) ; +#3256 = EDGE_CURVE ( 'NONE', #3756, #4425, #2859, .T. ) ; +#3257 = CARTESIAN_POINT ( 'NONE', ( 29.67141365309998200, 0.02049989116421979300, 76.25115493899832600 ) ) ; +#3258 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 6.135086370584986100, 6.758080205897341500 ) ) ; +#3259 = FACE_OUTER_BOUND ( 'NONE', #348, .T. ) ; +#3260 = EDGE_CURVE ( 'NONE', #4168, #719, #1922, .T. ) ; +#3261 = FACE_OUTER_BOUND ( 'NONE', #1964, .T. ) ; +#3262 = EDGE_LOOP ( 'NONE', ( #4056, #4340, #2180, #738 ) ) ; +#3263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3264 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -5.000000000000020400, 80.00000000000002800 ) ) ; +#3265 = CIRCLE ( 'NONE', #2429, 1.200000000000006600 ) ; +#3266 = EDGE_CURVE ( 'NONE', #569, #1584, #2022, .T. ) ; +#3267 = ORIENTED_EDGE ( 'NONE', *, *, #862, .F. ) ; +#3268 = ORIENTED_EDGE ( 'NONE', *, *, #2639, .F. ) ; +#3269 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3270 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 4.628745334363570100, 0.6781238001206608700 ) ) ; +#3271 = ORIENTED_EDGE ( 'NONE', *, *, #1981, .F. ) ; +#3272 = AXIS2_PLACEMENT_3D ( 'NONE', #4139, #2082, #42 ) ; +#3273 = AXIS2_PLACEMENT_3D ( 'NONE', #4057, #1989, #4388 ) ; +#3274 = VERTEX_POINT ( 'NONE', #1250 ) ; +#3275 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 4.999999999999993800, 76.25000000000002800 ) ) ; +#3276 = CARTESIAN_POINT ( 'NONE', ( 29.20550733999754600, -10.50000000000000200, 2.284152384479591000 ) ) ; +#3277 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.991006225469872600, 21.20617812313072600 ) ) ; +#3278 = VERTEX_POINT ( 'NONE', #1934 ) ; +#3279 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#3280 = VERTEX_POINT ( 'NONE', #1587 ) ; +#3281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3282 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3283 = ORIENTED_EDGE ( 'NONE', *, *, #4030, .T. ) ; +#3284 = EDGE_CURVE ( 'NONE', #942, #3346, #3592, .T. ) ; +#3285 = EDGE_LOOP ( 'NONE', ( #1015, #1113, #1228, #1362, #1523, #1580, #1818 ) ) ; +#3286 = ORIENTED_EDGE ( 'NONE', *, *, #898, .F. ) ; +#3287 = CARTESIAN_POINT ( 'NONE', ( 1.415100134138051100, 0.4330764304857484500, 77.25762977529787200 ) ) ; +#3288 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 0.6814905576138778900, 9.228346086223812500E-016 ) ) ; +#3289 = ORIENTED_EDGE ( 'NONE', *, *, #242, .T. ) ; +#3290 = EDGE_CURVE ( 'NONE', #4378, #2194, #1702, .T. ) ; +#3291 = ORIENTED_EDGE ( 'NONE', *, *, #3260, .T. ) ; +#3292 = CARTESIAN_POINT ( 'NONE', ( 25.40212342467692600, -12.71585034569652900, 0.01518026840777835500 ) ) ; +#3293 = EDGE_CURVE ( 'NONE', #2505, #1573, #4350, .T. ) ; +#3294 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#3295 = VECTOR ( 'NONE', #3922, 1000.000000000000000 ) ; +#3296 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#3297 = ORIENTED_EDGE ( 'NONE', *, *, #2885, .T. ) ; +#3298 = CARTESIAN_POINT ( 'NONE', ( -6.938893903907228400E-014, 2.499999999999993800, 78.75000000000002800 ) ) ; +#3299 = CIRCLE ( 'NONE', #3211, 1.200000000000006600 ) ; +#3300 = CIRCLE ( 'NONE', #1760, 5.000000000000000900 ) ; +#3301 = AXIS2_PLACEMENT_3D ( 'NONE', #3007, #933, #3354 ) ; +#3302 = ORIENTED_EDGE ( 'NONE', *, *, #1031, .F. ) ; +#3303 = FACE_OUTER_BOUND ( 'NONE', #2722, .T. ) ; +#3304 = CYLINDRICAL_SURFACE ( 'NONE', #26, 2.500000000000000000 ) ; +#3305 = EDGE_CURVE ( 'NONE', #2627, #445, #522, .T. ) ; +#3306 = VECTOR ( 'NONE', #1292, 1000.000000000000000 ) ; +#3307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#3308 = EDGE_CURVE ( 'NONE', #3940, #4357, #2543, .T. ) ; +#3309 = CYLINDRICAL_SURFACE ( 'NONE', #835, 3.189999999999998600 ) ; +#3310 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3311 = CIRCLE ( 'NONE', #1658, 1.199999999999999700 ) ; +#3312 = ORIENTED_EDGE ( 'NONE', *, *, #2382, .F. ) ; +#3313 = EDGE_CURVE ( 'NONE', #661, #2627, #2645, .T. ) ; +#3314 = FACE_OUTER_BOUND ( 'NONE', #733, .T. ) ; +#3315 = VERTEX_POINT ( 'NONE', #4371 ) ; +#3316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3317 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3318 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.220446049250313700E-014, 80.00000000000002800 ) ) ; +#3319 = EDGE_LOOP ( 'NONE', ( #466, #3051, #1530 ) ) ; +#3320 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.550800000000003300, 67.00000000000002800 ) ) ; +#3321 = ORIENTED_EDGE ( 'NONE', *, *, #3399, .F. ) ; +#3322 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.99999999999998900, 80.00000000000002800 ) ) ; +#3323 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #3804 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #455, #2872, #802 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#3324 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -25.00000000000000700, 55.00000000000000700 ) ) ; +#3325 = AXIS2_PLACEMENT_3D ( 'NONE', #654, #3079, #1004 ) ; +#3326 = ORIENTED_EDGE ( 'NONE', *, *, #1625, .F. ) ; +#3327 = ORIENTED_EDGE ( 'NONE', *, *, #492, .T. ) ; +#3328 = VERTEX_POINT ( 'NONE', #4024 ) ; +#3329 = VERTEX_POINT ( 'NONE', #615 ) ; +#3330 = EDGE_CURVE ( 'NONE', #1836, #2483, #701, .T. ) ; +#3331 = PLANE ( 'NONE', #1296 ) ; +#3332 = AXIS2_PLACEMENT_3D ( 'NONE', #4207, #2153, #108 ) ; +#3333 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.710569414459005800E-045, 80.00000000000002800 ) ) ; +#3334 = EDGE_LOOP ( 'NONE', ( #2705, #3656 ) ) ; +#3335 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247281900, 0.01275685208050858500, 76.09432346314798700 ) ) ; +#3336 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2378, #2015, #1937, #4339, #2286, #235, #2640, #583, #2997, #919, #3340, #1252, #3695, #1591, #4026, #1949, #4348, #2541, #493, #2904, #831, #3249, #1172, #3608, #1505, #3945, #1852, #4265, #2205, #160 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3.484374346582891800E-018, 0.0006418942535852236200, 0.001283788507170443800, 0.002567577014340909200, 0.003209471267926141500, 0.003851365521511374300, 0.004493259775096607000, 0.005135154028681840200, 0.005777048282267073300, 0.006418942535852304800, 0.007060836789437537900, 0.007702731043022770200, 0.008986519550193229600, 0.009628413803778454100, 0.01027030805736367900 ), + .UNSPECIFIED. ) ; +#3337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3338 = EDGE_LOOP ( 'NONE', ( #2619, #35, #2657, #2850, #1943 ) ) ; +#3339 = EDGE_CURVE ( 'NONE', #2291, #942, #2, .T. ) ; +#3340 = CARTESIAN_POINT ( 'NONE', ( 0.8949476335696871000, 22.85629932562236600, 70.18533919053564300 ) ) ; +#3341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3342 = EDGE_CURVE ( 'NONE', #987, #1425, #3356, .T. ) ; +#3343 = LINE ( 'NONE', #3574, #2408 ) ; +#3344 = VECTOR ( 'NONE', #2143, 1000.000000000000000 ) ; +#3345 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3346 = VERTEX_POINT ( 'NONE', #628 ) ; +#3347 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3348 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.701411589202242300, 0.1807528710491524100 ) ) ; +#3349 = CIRCLE ( 'NONE', #2650, 1.250000000000000200 ) ; +#3350 = CARTESIAN_POINT ( 'NONE', ( 0.1324136275346445300, 4.929100043975476600, 75.81454276716482400 ) ) ; +#3351 = LINE ( 'NONE', #4087, #2413 ) ; +#3352 = AXIS2_PLACEMENT_3D ( 'NONE', #3805, #2060, #18 ) ; +#3353 = AXIS2_PLACEMENT_3D ( 'NONE', #4380, #2334, #281 ) ; +#3354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3355 = CYLINDRICAL_SURFACE ( 'NONE', #1227, 1.199999999999999700 ) ; +#3356 = CIRCLE ( 'NONE', #3757, 1.200000000000006600 ) ; +#3357 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3358 = LINE ( 'NONE', #3606, #1511 ) ; +#3359 = EDGE_CURVE ( 'NONE', #2291, #3614, #2417, .T. ) ; +#3360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3361 = VERTEX_POINT ( 'NONE', #3049 ) ; +#3362 = LINE ( 'NONE', #1690, #2552 ) ; +#3363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.178938284644431100E-016, -1.000000000000000000 ) ) ; +#3364 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 6.121479386154907900, 6.750483276979238700 ) ) ; +#3365 = EDGE_LOOP ( 'NONE', ( #3707, #2024, #2399, #1536 ) ) ; +#3366 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -7.625158136161789500E-017 ) ) ; +#3367 = EDGE_CURVE ( 'NONE', #641, #3614, #4131, .T. ) ; +#3368 = CIRCLE ( 'NONE', #2460, 3.189999999999998600 ) ; +#3369 = CARTESIAN_POINT ( 'NONE', ( 1.229000479029700000, -10.62087084094750500, 1.708051975968805800 ) ) ; +#3370 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.50000000000000000, 1.257674520083185300E-015 ) ) ; +#3371 = ORIENTED_EDGE ( 'NONE', *, *, #2678, .F. ) ; +#3372 = ORIENTED_EDGE ( 'NONE', *, *, #4003, .T. ) ; +#3373 = PLANE ( 'NONE', #3204 ) ; +#3374 = EDGE_CURVE ( 'NONE', #2446, #2229, #597, .T. ) ; +#3375 = VERTEX_POINT ( 'NONE', #3062 ) ; +#3376 = VERTEX_POINT ( 'NONE', #989 ) ; +#3377 = VERTEX_POINT ( 'NONE', #1315 ) ; +#3378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3379 = CARTESIAN_POINT ( 'NONE', ( 2.002931817272095700E-013, 12.43034220574831700, 5.285867664209981800 ) ) ; +#3380 = ORIENTED_EDGE ( 'NONE', *, *, #979, .F. ) ; +#3381 = VERTEX_POINT ( 'NONE', #1656 ) ; +#3382 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -20.00000000000000700, 72.50000000000001400 ) ) ; +#3383 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.90000000000000200, 35.00000000000000000 ) ) ; +#3384 = ORIENTED_EDGE ( 'NONE', *, *, #1959, .F. ) ; +#3385 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 7.550800000000003300, 67.00000000000002800 ) ) ; +#3386 = ORIENTED_EDGE ( 'NONE', *, *, #3714, .F. ) ; +#3387 = EDGE_CURVE ( 'NONE', #122, #2958, #3133, .T. ) ; +#3388 = ORIENTED_EDGE ( 'NONE', *, *, #1064, .T. ) ; +#3389 = ORIENTED_EDGE ( 'NONE', *, *, #2038, .F. ) ; +#3390 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3962, #1526, #181, #2585, #531, #2940, #870, #3287, #1204, #3645, #1540, #3976, #1890, #4299, #2241, #197, #2598, #544 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.001127151740952765100, 0.001648484797538341300, 0.002169817854123917500, 0.002691150910709494200, 0.003212483967295070800, 0.003733817023880647000, 0.004255150080466224000, 0.004776483137051800200, 0.005297816193637376400 ), + .UNSPECIFIED. ) ; +#3391 = EDGE_CURVE ( 'NONE', #1790, #3974, #529, .T. ) ; +#3392 = CARTESIAN_POINT ( 'NONE', ( 31.24999999999996400, 2.255140518769849200E-014, 77.50000000000002800 ) ) ; +#3393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.08715574274765827700, -0.9961946980917455500 ) ) ; +#3394 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 16.11493030477682400, 9.388172172606827500 ) ) ; +#3395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3396 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3397 = VECTOR ( 'NONE', #446, 1000.000000000000000 ) ; +#3398 = PERSON_AND_ORGANIZATION ( #1892, #3247 ) ; +#3399 = EDGE_CURVE ( 'NONE', #839, #147, #1382, .T. ) ; +#3400 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -20.00000000000000400, 35.00000000000000000 ) ) ; +#3401 = CIRCLE ( 'NONE', #335, 3.189999999999998600 ) ; +#3402 = LINE ( 'NONE', #55, #2356 ) ; +#3403 = ORIENTED_EDGE ( 'NONE', *, *, #1842, .F. ) ; +#3404 = FACE_BOUND ( 'NONE', #534, .T. ) ; +#3405 = FACE_OUTER_BOUND ( 'NONE', #3486, .T. ) ; +#3406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3407 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, 25.00100000000000800, 61.20000000000002400 ) ) ; +#3408 = ADVANCED_FACE ( 'NONE', ( #2212 ), #3028, .T. ) ; +#3409 = VECTOR ( 'NONE', #953, 1000.000000000000000 ) ; +#3410 = AXIS2_PLACEMENT_3D ( 'NONE', #5, #2403, #350 ) ; +#3411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3412 = FACE_OUTER_BOUND ( 'NONE', #3334, .T. ) ; +#3413 = EDGE_CURVE ( 'NONE', #569, #4022, #3957, .T. ) ; +#3414 = CYLINDRICAL_SURFACE ( 'NONE', #1858, 2.500000000000002200 ) ; +#3415 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -3.637955742747657900, 21.10709478017819100 ) ) ; +#3416 = VERTEX_POINT ( 'NONE', #702 ) ; +#3417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3418 = DIRECTION ( 'NONE', ( -1.000000000000000000, 2.498001805406601600E-014, 8.666684749742551500E-030 ) ) ; +#3419 = CYLINDRICAL_SURFACE ( 'NONE', #249, 5.050800000000001500 ) ; +#3420 = ORIENTED_EDGE ( 'NONE', *, *, #3038, .F. ) ; +#3421 = EDGE_CURVE ( 'NONE', #641, #4411, #3255, .T. ) ; +#3422 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 18.80195263627889100, 28.23653102917612400 ) ) ; +#3423 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3424 = ORIENTED_EDGE ( 'NONE', *, *, #3671, .T. ) ; +#3425 = ADVANCED_FACE ( 'NONE', ( #381, #1278 ), #2757, .F. ) ; +#3426 = ORIENTED_EDGE ( 'NONE', *, *, #1835, .F. ) ; +#3427 = EDGE_CURVE ( 'NONE', #159, #1567, #274, .T. ) ; +#3428 = ORIENTED_EDGE ( 'NONE', *, *, #1013, .F. ) ; +#3429 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 77.50000000000002800 ) ) ; +#3430 = ORIENTED_EDGE ( 'NONE', *, *, #3644, .F. ) ; +#3431 = AXIS2_PLACEMENT_3D ( 'NONE', #3755, #1653, #4075 ) ; +#3432 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.50000000000000400, 6.299999999999995400 ) ) ; +#3433 = ORIENTED_EDGE ( 'NONE', *, *, #2607, .F. ) ; +#3434 = EDGE_LOOP ( 'NONE', ( #1569, #1665, #2616, #1787, #2712 ) ) ; +#3435 = CARTESIAN_POINT ( 'NONE', ( 32.49999999999996400, 2.428612866367522000E-014, 75.00000000000002800 ) ) ; +#3436 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 9.049970703547289800, 8.971871860392123900 ) ) ; +#3437 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 68.75000000000000000 ) ) ; +#3438 = CLOSED_SHELL ( 'NONE', ( #3130, #476, #420, #305, #2692, #3533, #3188, #2415, #2544, #1826, #2125, #1466, #3446, #980, #1121, #2839, #1164, #2491, #3889, #1654, #12, #4103, #2349, #3205, #2046, #2753, #4123, #1096, #1742, #1391, #2027, #2518, #2441, #3582, #1442, #2369, #3044, #3086, #4225, #2070, #2849, #1091, #1018, #3914, #3817, #2501, #61, #2005, #1114, #346, #4248, #394, #4085, #3180, #3233, #2462, #2871, #37, #3067, #679, #2780, #4389, #1769, #1341, #2895, #2094, #2468, #3865, #3425, #116, #1723, #3896, #3155, #3408, #810, #1700, #791, #734, #4065, #4199, #832, #1416, #2131, #2151, #1672, #2178, #369, #95, #3526, #3787, #1801, #705, #637, #4231, #87, #2732, #136, #3503, #3871, #754, #326, #1141, #3471, #1448, #2810, #658, #444, #1363, #3840, #3749, #1040, #3936, #4144, #1300, #784, #4424, #1490, #763, #2393, #4205, #4170, #3767, #3556, #3109, #2161 ) ) ; +#3439 = ORIENTED_EDGE ( 'NONE', *, *, #1842, .T. ) ; +#3440 = EDGE_CURVE ( 'NONE', #4378, #4280, #1190, .T. ) ; +#3441 = VERTEX_POINT ( 'NONE', #4095 ) ; +#3442 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 7.550799999999995300, 15.49999999999998400 ) ) ; +#3443 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 71.93999999999999800 ) ) ; +#3444 = EDGE_CURVE ( 'NONE', #445, #1469, #1074, .T. ) ; +#3445 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3446 = ADVANCED_FACE ( 'NONE', ( #2089 ), #2802, .F. ) ; +#3447 = VECTOR ( 'NONE', #2165, 1000.000000000000000 ) ; +#3448 = CIRCLE ( 'NONE', #2868, 3.189999999999998600 ) ; +#3449 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.734723475976805600E-016, 0.0000000000000000000 ) ) ; +#3450 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 2.499999999999987100, 75.00000000000002800 ) ) ; +#3451 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3452 = EDGE_CURVE ( 'NONE', #4029, #3115, #3736, .T. ) ; +#3453 = LINE ( 'NONE', #3073, #1501 ) ; +#3454 = LINE ( 'NONE', #2721, #4252 ) ; +#3455 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3456 = LINE ( 'NONE', #1083, #823 ) ; +#3457 = VECTOR ( 'NONE', #247, 1000.000000000000000 ) ; +#3458 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 65.56000000000000200 ) ) ; +#3459 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.059793774530124900, 10.46841981887819800 ) ) ; +#3460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3461 = LINE ( 'NONE', #3215, #2549 ) ; +#3462 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -22.90000000000000200, 35.00000000000000000 ) ) ; +#3463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#3464 = APPROVAL ( #146, 'UNSPECIFIED' ) ; +#3465 = FACE_OUTER_BOUND ( 'NONE', #3045, .T. ) ; +#3466 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3467 = EDGE_CURVE ( 'NONE', #1251, #3441, #1980, .T. ) ; +#3468 = VERTEX_POINT ( 'NONE', #343 ) ; +#3469 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3470 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3471 = ADVANCED_FACE ( 'NONE', ( #3843, #3643 ), #1361, .F. ) ; +#3472 = FACE_OUTER_BOUND ( 'NONE', #17, .T. ) ; +#3473 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3474 = ORIENTED_EDGE ( 'NONE', *, *, #923, .F. ) ; +#3475 = EDGE_CURVE ( 'NONE', #4164, #4168, #180, .T. ) ; +#3476 = AXIS2_PLACEMENT_3D ( 'NONE', #3565, #1467, #3907 ) ; +#3477 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999978700, 77.50000000000002800 ) ) ; +#3478 = VERTEX_POINT ( 'NONE', #4121 ) ; +#3479 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 21.13456806476752800, 18.51056665312653100 ) ) ; +#3480 = ORIENTED_EDGE ( 'NONE', *, *, #2551, .F. ) ; +#3481 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -111.7867742303483900, 30.56889037156613400 ) ) ; +#3482 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.50000000000000400, 23.79999999999999700 ) ) ; +#3483 = ORIENTED_EDGE ( 'NONE', *, *, #543, .F. ) ; +#3484 = EDGE_CURVE ( 'NONE', #3538, #4053, #2691, .T. ) ; +#3485 = ORIENTED_EDGE ( 'NONE', *, *, #1209, .F. ) ; +#3486 = EDGE_LOOP ( 'NONE', ( #3428, #3474, #3487, #3853 ) ) ; +#3487 = ORIENTED_EDGE ( 'NONE', *, *, #3305, .F. ) ; +#3488 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3489 = EDGE_CURVE ( 'NONE', #4029, #987, #972, .T. ) ; +#3490 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 14.64466094067263100, 0.0000000000000000000 ) ) ; +#3491 = ORIENTED_EDGE ( 'NONE', *, *, #570, .T. ) ; +#3492 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 19.99999999999998900, 80.00000000000002800 ) ) ; +#3493 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.347358039593635500E-016 ) ) ; +#3495 = ORIENTED_EDGE ( 'NONE', *, *, #3590, .T. ) ; +#3496 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 23.48088963527667200, 26.22909088636906800 ) ) ; +#3497 = CARTESIAN_POINT ( 'NONE', ( 27.51846438475085000, 2.849884272326916900, 77.50019583923212000 ) ) ; +#3498 = VERTEX_POINT ( 'NONE', #375 ) ; +#3499 = AXIS2_PLACEMENT_3D ( 'NONE', #1021, #3811, #3460 ) ; +#3500 = AXIS2_PLACEMENT_3D ( 'NONE', #10, #2406, #354 ) ; +#3501 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -3.550799999999999700, 22.10328947826993600 ) ) ; +#3502 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999923200, 2.499999999999993800, 77.50000000000002800 ) ) ; +#3503 = ADVANCED_FACE ( 'NONE', ( #3522 ), #758, .F. ) ; +#3504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9961946980917455500, -0.08715574274765827700 ) ) ; +#3505 = VERTEX_POINT ( 'NONE', #3135 ) ; +#3506 = EDGE_CURVE ( 'NONE', #994, #3963, #1647, .T. ) ; +#3507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3508 = FACE_OUTER_BOUND ( 'NONE', #4401, .T. ) ; +#3509 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.734723475976805900E-016, 0.0000000000000000000 ) ) ; +#3510 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#3511 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 25.00000000000000000, 40.00000000000002800 ) ) ; +#3512 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.500000000000005800, 72.05080000000002400 ) ) ; +#3513 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3514 = CARTESIAN_POINT ( 'NONE', ( 2.409185671430221600, 3.190007421839071700, 77.49861212917966200 ) ) ; +#3515 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 19.99999999992682500, 38.16598990466983600 ) ) ; +#3516 = CYLINDRICAL_SURFACE ( 'NONE', #1024, 0.5000000000000004400 ) ; +#3517 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3518 = TOROIDAL_SURFACE ( 'NONE', #2472, 1.250000000000000000, 1.250000000000000000 ) ; +#3519 = EDGE_CURVE ( 'NONE', #3869, #3722, #879, .T. ) ; +#3520 = ORIENTED_EDGE ( 'NONE', *, *, #3098, .T. ) ; +#3521 = FACE_OUTER_BOUND ( 'NONE', #1533, .T. ) ; +#3522 = FACE_OUTER_BOUND ( 'NONE', #3004, .T. ) ; +#3523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3524 = EDGE_CURVE ( 'NONE', #1792, #2559, #65, .T. ) ; +#3525 = LINE ( 'NONE', #1607, #2600 ) ; +#3526 = ADVANCED_FACE ( 'NONE', ( #3405 ), #3304, .T. ) ; +#3527 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.347358039593635500E-016, 1.000000000000000000 ) ) ; +#3528 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 18.64009039399571700, 27.39250977700910300 ) ) ; +#3529 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999993500, 20.00000000000001800, 68.75000000000000000 ) ) ; +#3530 = VECTOR ( 'NONE', #2906, 1000.000000000000000 ) ; +#3531 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998900, -5.000000000000021300, 77.50000000000002800 ) ) ; +#3532 = CARTESIAN_POINT ( 'NONE', ( 0.3285863468999483700, 4.979500108835759800, 76.25115493899817000 ) ) ; +#3533 = ADVANCED_FACE ( 'NONE', ( #1552 ), #1446, .F. ) ; +#3534 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 20.00000000000001100, 5.204170427930424400E-015 ) ) ; +#3535 = AXIS2_PLACEMENT_3D ( 'NONE', #2002, #4398, #2350 ) ; +#3536 = FACE_OUTER_BOUND ( 'NONE', #4063, .T. ) ; +#3537 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3538 = VERTEX_POINT ( 'NONE', #2109 ) ; +#3539 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 2.499999999999993800, 75.00000000000002800 ) ) ; +#3540 = EDGE_CURVE ( 'NONE', #2229, #2146, #2478, .T. ) ; +#3541 = ORIENTED_EDGE ( 'NONE', *, *, #2885, .F. ) ; +#3542 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#3544 = ORIENTED_EDGE ( 'NONE', *, *, #2546, .T. ) ; +#3545 = ORIENTED_EDGE ( 'NONE', *, *, #3738, .T. ) ; +#3546 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 21.12864939748478900, 18.58948709048191000 ) ) ; +#3547 = CARTESIAN_POINT ( 'NONE', ( 29.99673515794111700, 0.6563063834754582200, 75.13925550853817000 ) ) ; +#3548 = ORIENTED_EDGE ( 'NONE', *, *, #1877, .F. ) ; +#3549 = EDGE_CURVE ( 'NONE', #1410, #2710, #794, .T. ) ; +#3550 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781442500E-015, 0.0000000000000000000 ) ) ; +#3551 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -2.550799999999998800, 22.10328947826993600 ) ) ; +#3552 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#3553 = VERTEX_POINT ( 'NONE', #4167 ) ; +#3554 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3555 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3556 = ADVANCED_FACE ( 'NONE', ( #2360 ), #4193, .T. ) ; +#3557 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3558 = EDGE_LOOP ( 'NONE', ( #3119, #939, #2502, #1966 ) ) ; +#3559 = EDGE_CURVE ( 'NONE', #3149, #1907, #554, .T. ) ; +#3560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3561 = VERTEX_POINT ( 'NONE', #4204 ) ; +#3562 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3563 = ORIENTED_EDGE ( 'NONE', *, *, #1098, .F. ) ; +#3564 = ORIENTED_EDGE ( 'NONE', *, *, #293, .T. ) ; +#3565 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 68.75000000000000000 ) ) ; +#3566 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 18.69908502223669800, 13.44345676805833600 ) ) ; +#3567 = CARTESIAN_POINT ( 'NONE', ( 29.94262786968300800, 4.795692437852601100, 75.55001294024467000 ) ) ; +#3568 = ORIENTED_EDGE ( 'NONE', *, *, #793, .T. ) ; +#3569 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3570 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.550800000000003300, 67.00000000000002800 ) ) ; +#3571 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.250000000000000000, 77.50000000000002800 ) ) ; +#3572 = VERTEX_POINT ( 'NONE', #2148 ) ; +#3573 = AXIS2_PLACEMENT_3D ( 'NONE', #1783, #3537, #2494 ) ; +#3574 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -112.6671866812881300, 20.50573000932254800 ) ) ; +#3575 = EDGE_CURVE ( 'NONE', #2565, #1308, #2260, .T. ) ; +#3576 = CARTESIAN_POINT ( 'NONE', ( 2.550383384147269700E-016, 9.999999999999978700, 80.00000000000002800 ) ) ; +#3577 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -13.80000000000000100, 68.75000000000002800 ) ) ; +#3578 = CARTESIAN_POINT ( 'NONE', ( 28.86943610354409600, 23.16709170061283600, 68.31346509330320800 ) ) ; +#3579 = LINE ( 'NONE', #99, #1687 ) ; +#3580 = CYLINDRICAL_SURFACE ( 'NONE', #1666, 5.050799999999998000 ) ; +#3581 = EDGE_CURVE ( 'NONE', #1118, #2971, #2709, .T. ) ; +#3582 = ADVANCED_FACE ( 'NONE', ( #643, #3195, #439 ), #2199, .T. ) ; +#3583 = ORIENTED_EDGE ( 'NONE', *, *, #319, .T. ) ; +#3584 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 68.75000000000000000 ) ) ; +#3585 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 12.10772564898134900, 12.38361405585175300 ) ) ; +#3586 = FACE_OUTER_BOUND ( 'NONE', #609, .T. ) ; +#3587 = LINE ( 'NONE', #632, #819 ) ; +#3588 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.250000000000000000, 77.50000000000002800 ) ) ; +#3589 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3590 = EDGE_CURVE ( 'NONE', #4164, #43, #3082, .T. ) ; +#3591 = CIRCLE ( 'NONE', #98, 5.050800000000001500 ) ; +#3592 = LINE ( 'NONE', #1947, #824 ) ; +#3593 = APPROVAL_ROLE ( '' ) ; +#3594 = CARTESIAN_POINT ( 'NONE', ( 19.49999999999999600, -22.50000000000000400, 55.50000000000000700 ) ) ; +#3595 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 10.36740953619964300, 10.26899922962123300 ) ) ; +#3596 = VECTOR ( 'NONE', #4214, 1000.000000000000000 ) ; +#3597 = CARTESIAN_POINT ( 'NONE', ( 29.93109341941362800, 20.85368832292930500, 71.83105576908987200 ) ) ; +#3598 = EDGE_CURVE ( 'NONE', #3974, #4116, #3998, .T. ) ; +#3599 = LINE ( 'NONE', #563, #4354 ) ; +#3600 = CARTESIAN_POINT ( 'NONE', ( 27.78772655856664600, 1.322625408988539900, 77.48440911745541400 ) ) ; +#3601 = ORIENTED_EDGE ( 'NONE', *, *, #3644, .T. ) ; +#3602 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 12.44364090520325700, 5.297989820981286800 ) ) ; +#3603 = AXIS2_PLACEMENT_3D ( 'NONE', #3171, #1095, #3523 ) ; +#3604 = AXIS2_PLACEMENT_3D ( 'NONE', #294, #2698, #636 ) ; +#3605 = CYLINDRICAL_SURFACE ( 'NONE', #2592, 1.000000000000000900 ) ; +#3606 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -10.50000000000000000, -1.994931997373327800E-015 ) ) ; +#3607 = ORIENTED_EDGE ( 'NONE', *, *, #2092, .T. ) ; +#3608 = CARTESIAN_POINT ( 'NONE', ( 0.3952449242543331600, 21.97494331747508100, 66.21180773075848000 ) ) ; +#3609 = EDGE_LOOP ( 'NONE', ( #3103, #3673, #4373, #491 ) ) ; +#3610 = EDGE_LOOP ( 'NONE', ( #2719, #2751, #2755, #2770 ) ) ; +#3611 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 18.64009039409061300, 27.39250977699204300 ) ) ; +#3612 = EDGE_CURVE ( 'NONE', #1208, #795, #2157, .T. ) ; +#3613 = ORIENTED_EDGE ( 'NONE', *, *, #2984, .F. ) ; +#3614 = VERTEX_POINT ( 'NONE', #511 ) ; +#3615 = PLANE ( 'NONE', #4240 ) ; +#3616 = ORIENTED_EDGE ( 'NONE', *, *, #2354, .F. ) ; +#3617 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 8.695373051282997400, 2.450891039049908600 ) ) ; +#3618 = EDGE_CURVE ( 'NONE', #1086, #2627, #2034, .T. ) ; +#3619 = ORIENTED_EDGE ( 'NONE', *, *, #690, .F. ) ; +#3620 = CARTESIAN_POINT ( 'NONE', ( -1.203706215242029700E-029, 3.749999999999986200, 78.75000000000002800 ) ) ; +#3621 = ORIENTED_EDGE ( 'NONE', *, *, #570, .F. ) ; +#3622 = CARTESIAN_POINT ( 'NONE', ( 29.91912211601520300, 2.465865475340303500E-015, 76.19307411322432700 ) ) ; +#3623 = EDGE_LOOP ( 'NONE', ( #3232, #353 ) ) ; +#3624 = EDGE_CURVE ( 'NONE', #677, #1257, #2979, .T. ) ; +#3625 = ORIENTED_EDGE ( 'NONE', *, *, #1098, .T. ) ; +#3626 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.059793774530124900, 10.46841981887819800 ) ) ; +#3627 = ORIENTED_EDGE ( 'NONE', *, *, #720, .F. ) ; +#3628 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3629 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.297351335746814300, 5.239341012014518700 ) ) ; +#3630 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.49999999999999500, 42.49999999999999300 ) ) ; +#3631 = LINE ( 'NONE', #3855, #2679 ) ; +#3632 = LOCAL_TIME ( 15, 7, 17.00000000000000000, #54 ) ; +#3633 = CARTESIAN_POINT ( 'NONE', ( 28.77098511387931300, -10.62087612928677800, 1.708035076326281000 ) ) ; +#3634 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.550799999999994400, 67.00000000000002800 ) ) ; +#3635 = EDGE_CURVE ( 'NONE', #1550, #2717, #225, .T. ) ; +#3636 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.602085213965210600E-016, 1.000000000000000000 ) ) ; +#3637 = LINE ( 'NONE', #649, #1642 ) ; +#3638 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.550800000000000600, 21.18695830425251000 ) ) ; +#3639 = CYLINDRICAL_SURFACE ( 'NONE', #874, 1.199999999999992600 ) ; +#3640 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -25.00000000000001100, 80.00000000000001400 ) ) ; +#3641 = ORIENTED_EDGE ( 'NONE', *, *, #1870, .F. ) ; +#3642 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3643 = FACE_OUTER_BOUND ( 'NONE', #863, .T. ) ; +#3644 = EDGE_CURVE ( 'NONE', #2911, #1836, #3777, .T. ) ; +#3645 = CARTESIAN_POINT ( 'NONE', ( 1.802132534134097000, 0.7589248405757762500, 77.40435336227304200 ) ) ; +#3646 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 9.566489781553878700E-016, 8.673617379884035500E-016 ) ) ; +#3647 = CIRCLE ( 'NONE', #3034, 3.189999999999998600 ) ; +#3648 = CARTESIAN_POINT ( 'NONE', ( 25.09956617771850400, -12.92959612749518300, -8.480917384383680900E-017 ) ) ; +#3649 = EDGE_CURVE ( 'NONE', #3572, #1173, #2875, .T. ) ; +#3650 = CIRCLE ( 'NONE', #1019, 0.5000000000000004400 ) ; +#3651 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3652 = ORIENTED_EDGE ( 'NONE', *, *, #3824, .F. ) ; +#3653 = PLANE ( 'NONE', #1482 ) ; +#3654 = VECTOR ( 'NONE', #2470, 1000.000000000000000 ) ; +#3655 = ORIENTED_EDGE ( 'NONE', *, *, #2074, .F. ) ; +#3656 = ORIENTED_EDGE ( 'NONE', *, *, #2798, .T. ) ; +#3657 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.301042606982605100E-016 ) ) ; +#3658 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3659 = ORIENTED_EDGE ( 'NONE', *, *, #906, .F. ) ; +#3660 = AXIS2_PLACEMENT_3D ( 'NONE', #41, #2434, #384 ) ; +#3661 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#3662 = ORIENTED_EDGE ( 'NONE', *, *, #3714, .T. ) ; +#3663 = ORIENTED_EDGE ( 'NONE', *, *, #3413, .T. ) ; +#3664 = EDGE_CURVE ( 'NONE', #3115, #4029, #323, .T. ) ; +#3665 = EDGE_LOOP ( 'NONE', ( #30, #528, #2331, #2019, #4415, #577 ) ) ; +#3666 = ORIENTED_EDGE ( 'NONE', *, *, #2169, .F. ) ; +#3667 = ORIENTED_EDGE ( 'NONE', *, *, #1465, .F. ) ; +#3668 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -20.00000000000000400, 35.00000000000000000 ) ) ; +#3669 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996400, 1.250000000000020900, 77.50000000000002800 ) ) ; +#3670 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ; +#3671 = EDGE_CURVE ( 'NONE', #3077, #91, #3686, .T. ) ; +#3672 = ORIENTED_EDGE ( 'NONE', *, *, #2560, .F. ) ; +#3673 = ORIENTED_EDGE ( 'NONE', *, *, #3198, .F. ) ; +#3674 = EDGE_CURVE ( 'NONE', #3185, #3760, #2739, .T. ) ; +#3675 = ORIENTED_EDGE ( 'NONE', *, *, #4326, .F. ) ; +#3676 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -20.00000000000000000, 2.168404344971016500E-016 ) ) ; +#3677 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999300, 65.56000000000000200 ) ) ; +#3678 = PLANE ( 'NONE', #672 ) ; +#3679 = AXIS2_PLACEMENT_3D ( 'NONE', #635, #3057, #985 ) ; +#3680 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 19.99999999999999600, 68.75000000000000000 ) ) ; +#3681 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.550800000000003300, 67.00000000000002800 ) ) ; +#3682 = CYLINDRICAL_SURFACE ( 'NONE', #1368, 1.200000000000006600 ) ; +#3683 = FACE_OUTER_BOUND ( 'NONE', #800, .T. ) ; +#3684 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3685 = VECTOR ( 'NONE', #3363, 1000.000000000000000 ) ; +#3686 = LINE ( 'NONE', #3626, #1822 ) ; +#3687 = EDGE_CURVE ( 'NONE', #1792, #400, #916, .T. ) ; +#3688 = FACE_OUTER_BOUND ( 'NONE', #3219, .T. ) ; +#3689 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.220446049250313700E-014, 80.00000000000002800 ) ) ; +#3690 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 25.00100000000000800, 60.00000000000002100 ) ) ; +#3691 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 7.703719777548943400E-031, 8.673617379884035500E-016 ) ) ; +#3692 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999995700, 3.749999999999993800, 75.00000000000002800 ) ) ; +#3693 = EDGE_CURVE ( 'NONE', #661, #3940, #3587, .T. ) ; +#3694 = LINE ( 'NONE', #2989, #1829 ) ; +#3695 = CARTESIAN_POINT ( 'NONE', ( 1.062050303093303100, 23.08148629465289800, 69.60174807350630000 ) ) ; +#3696 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3697 = VECTOR ( 'NONE', #4169, 1000.000000000000000 ) ; +#3698 = ORIENTED_EDGE ( 'NONE', *, *, #631, .T. ) ; +#3699 = EDGE_CURVE ( 'NONE', #1306, #1808, #1017, .T. ) ; +#3700 = FACE_OUTER_BOUND ( 'NONE', #1772, .T. ) ; +#3701 = ORIENTED_EDGE ( 'NONE', *, *, #2681, .F. ) ; +#3702 = PLANE ( 'NONE', #3814 ) ; +#3703 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.610519864021270600, 0.6725802636760943600 ) ) ; +#3704 = VERTEX_POINT ( 'NONE', #1311 ) ; +#3705 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247688800, 4.987243147919475200, 76.09432346314807200 ) ) ; +#3706 = VERTEX_POINT ( 'NONE', #4072 ) ; +#3707 = ORIENTED_EDGE ( 'NONE', *, *, #3266, .F. ) ; +#3708 = CC_DESIGN_APPROVAL ( #3464, ( #2756 ) ) ; +#3709 = ORIENTED_EDGE ( 'NONE', *, *, #1895, .F. ) ; +#3710 = EDGE_CURVE ( 'NONE', #1469, #3108, #4346, .T. ) ; +#3711 = ORIENTED_EDGE ( 'NONE', *, *, #1519, .T. ) ; +#3712 = ORIENTED_EDGE ( 'NONE', *, *, #2582, .T. ) ; +#3713 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.431212450939743700, 11.12379794200893800 ) ) ; +#3714 = EDGE_CURVE ( 'NONE', #3561, #729, #1696, .T. ) ; +#3715 = PLANE ( 'NONE', #3117 ) ; +#3716 = ORIENTED_EDGE ( 'NONE', *, *, #3016, .F. ) ; +#3717 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 8.677158151852911100, 2.440710713142210800 ) ) ; +#3718 = CARTESIAN_POINT ( 'NONE', ( 29.36552232915748900, 4.920637771091930900, 76.67342270231203800 ) ) ; +#3719 = ORIENTED_EDGE ( 'NONE', *, *, #1428, .F. ) ; +#3720 = CARTESIAN_POINT ( 'NONE', ( 0.7944897550793230700, -10.49999999999999600, 2.284157415954045000 ) ) ; +#3721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3722 = VERTEX_POINT ( 'NONE', #2021 ) ; +#3723 = EDGE_CURVE ( 'NONE', #3505, #2133, #3351, .T. ) ; +#3724 = EDGE_CURVE ( 'NONE', #4066, #3144, #3454, .T. ) ; +#3725 = VECTOR ( 'NONE', #2114, 1000.000000000000000 ) ; +#3726 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#3727 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.250000000000000200, 75.00000000000002800 ) ) ; +#3728 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 68.75000000000002800 ) ) ; +#3729 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 9.383931264639178600, 9.285397915801191000 ) ) ; +#3730 = FACE_OUTER_BOUND ( 'NONE', #3164, .T. ) ; +#3731 = FACE_OUTER_BOUND ( 'NONE', #3823, .T. ) ; +#3732 = AXIS2_PLACEMENT_3D ( 'NONE', #3577, #1869, #4283 ) ; +#3733 = ORIENTED_EDGE ( 'NONE', *, *, #4379, .T. ) ; +#3734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3735 = LINE ( 'NONE', #2398, #2596 ) ; +#3736 = CIRCLE ( 'NONE', #2648, 1.200000000000006600 ) ; +#3737 = VECTOR ( 'NONE', #2666, 1000.000000000000000 ) ; +#3738 = EDGE_CURVE ( 'NONE', #585, #2235, #1596, .T. ) ; +#3739 = AXIS2_PLACEMENT_3D ( 'NONE', #2799, #741, #3157 ) ; +#3740 = VECTOR ( 'NONE', #480, 1000.000000000000000 ) ; +#3741 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3742 = CARTESIAN_POINT ( 'NONE', ( -7.986684277470164000E-013, 16.74096024304951400, 10.26439019520762000 ) ) ; +#3743 = ORIENTED_EDGE ( 'NONE', *, *, #3751, .T. ) ; +#3744 = EDGE_CURVE ( 'NONE', #677, #4159, #595, .T. ) ; +#3745 = VECTOR ( 'NONE', #2102, 1000.000000000000000 ) ; +#3746 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3747 = ORIENTED_EDGE ( 'NONE', *, *, #2628, .F. ) ; +#3748 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3749 = ADVANCED_FACE ( 'NONE', ( #1502 ), #3127, .T. ) ; +#3750 = ORIENTED_EDGE ( 'NONE', *, *, #3038, .T. ) ; +#3751 = EDGE_CURVE ( 'NONE', #1999, #207, #4038, .T. ) ; +#3752 = EDGE_LOOP ( 'NONE', ( #1726, #1902 ) ) ; +#3753 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.673617379884037900E-017 ) ) ; +#3754 = EDGE_LOOP ( 'NONE', ( #3809, #3821, #3863, #3924 ) ) ; +#3755 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -14.99999999999998000, 68.75000000000002800 ) ) ; +#3756 = VERTEX_POINT ( 'NONE', #2737 ) ; +#3757 = AXIS2_PLACEMENT_3D ( 'NONE', #976, #3395, #1305 ) ; +#3758 = VERTEX_POINT ( 'NONE', #3099 ) ; +#3759 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -25.00000000000001100, 72.50000000000001400 ) ) ; +#3760 = VERTEX_POINT ( 'NONE', #3442 ) ; +#3761 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999998400, -14.99999999999998000, 68.75000000000002800 ) ) ; +#3762 = ORIENTED_EDGE ( 'NONE', *, *, #1072, .T. ) ; +#3763 = EDGE_CURVE ( 'NONE', #735, #3071, #501, .T. ) ; +#3764 = ORIENTED_EDGE ( 'NONE', *, *, #1310, .F. ) ; +#3765 = EDGE_CURVE ( 'NONE', #2717, #2954, #2208, .T. ) ; +#3766 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -15.00000000000000200, 71.94000000000002600 ) ) ; +#3767 = ADVANCED_FACE ( 'NONE', ( #1274 ), #3953, .T. ) ; +#3768 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884037400E-016, 18.16604152952538000, 25.56921442720329900 ) ) ; +#3769 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #776, #3210, #797, #3567, #1574, #4009, #1932, #4333, #2279, #231 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004592101670904953500, 0.0009184203341809906900, 0.001377630501271486000, 0.001836840668361981400 ), + .UNSPECIFIED. ) ; +#3770 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 25.00000000000000400, 40.00000000000004300 ) ) ; +#3771 = CYLINDRICAL_SURFACE ( 'NONE', #3060, 2.499999999999992900 ) ; +#3772 = EDGE_CURVE ( 'NONE', #3498, #1304, #3025, .T. ) ; +#3773 = VECTOR ( 'NONE', #1090, 1000.000000000000000 ) ; +#3774 = VECTOR ( 'NONE', #907, 1000.000000000000000 ) ; +#3775 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#3776 = LINE ( 'NONE', #4355, #224 ) ; +#3777 = LINE ( 'NONE', #1871, #1933 ) ; +#3778 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3779 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3780 = DIRECTION ( 'NONE', ( 1.387778780781442500E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3781 = FACE_BOUND ( 'NONE', #2888, .T. ) ; +#3782 = AXIS2_PLACEMENT_3D ( 'NONE', #3437, #1346, #3784 ) ; +#3783 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 7.998275394425628600, 8.073019510265364600 ) ) ; +#3784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3786 = CYLINDRICAL_SURFACE ( 'NONE', #360, 3.189999999999998600 ) ; +#3787 = ADVANCED_FACE ( 'NONE', ( #377 ), #2927, .F. ) ; +#3788 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3789 = ORIENTED_EDGE ( 'NONE', *, *, #3160, .F. ) ; +#3790 = EDGE_CURVE ( 'NONE', #4413, #3381, #3838, .T. ) ; +#3791 = VECTOR ( 'NONE', #3839, 1000.000000000000000 ) ; +#3792 = PLANE ( 'NONE', #3410 ) ; +#3793 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3794 = AXIS2_PLACEMENT_3D ( 'NONE', #2226, #4288, #3985 ) ; +#3795 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3796 = ORIENTED_EDGE ( 'NONE', *, *, #1959, .T. ) ; +#3797 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3798 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.50000000000000400, 26.19999999999999900 ) ) ; +#3799 = CIRCLE ( 'NONE', #3, 1.000000000000000900 ) ; +#3800 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -2.550799999999994400, 67.00000000000002800 ) ) ; +#3801 = EDGE_LOOP ( 'NONE', ( #1178, #1206 ) ) ; +#3802 = EDGE_CURVE ( 'NONE', #400, #2054, #271, .T. ) ; +#3803 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3804 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #455, 'distance_accuracy_value', 'NONE'); +#3805 = CARTESIAN_POINT ( 'NONE', ( 23.69999999999999900, -22.90000000000000200, 35.00000000000000000 ) ) ; +#3806 = VERTEX_POINT ( 'NONE', #3477 ) ; +#3807 = ORIENTED_EDGE ( 'NONE', *, *, #1575, .T. ) ; +#3808 = EDGE_CURVE ( 'NONE', #4413, #4106, #1978, .T. ) ; +#3809 = ORIENTED_EDGE ( 'NONE', *, *, #1549, .T. ) ; +#3810 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3811 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3812 = EDGE_LOOP ( 'NONE', ( #897, #3564, #251, #852 ) ) ; +#3813 = AXIS2_PLACEMENT_3D ( 'NONE', #737, #3152, #1075 ) ; +#3814 = AXIS2_PLACEMENT_3D ( 'NONE', #3002, #1601, #4032 ) ; +#3815 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3816 = ORIENTED_EDGE ( 'NONE', *, *, #2707, .T. ) ; +#3817 = ADVANCED_FACE ( 'NONE', ( #2085 ), #3829, .F. ) ; +#3818 = ORIENTED_EDGE ( 'NONE', *, *, #1870, .T. ) ; +#3819 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3820 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3821 = ORIENTED_EDGE ( 'NONE', *, *, #3763, .T. ) ; +#3822 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884035500E-017 ) ) ; +#3823 = EDGE_LOOP ( 'NONE', ( #4273, #2345, #3711 ) ) ; +#3824 = EDGE_CURVE ( 'NONE', #1143, #3856, #1070, .T. ) ; +#3825 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 67.55000000000004000 ) ) ; +#3826 = VERTEX_POINT ( 'NONE', #3846 ) ; +#3827 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3828 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 25.00000000000000400, 40.00000000000002800 ) ) ; +#3829 = PLANE ( 'NONE', #4160 ) ; +#3830 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 17.11435492930465300, 22.06026870897590800 ) ) ; +#3831 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3832 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3833 = LINE ( 'NONE', #38, #267 ) ; +#3834 = PERSON_AND_ORGANIZATION ( #1892, #3247 ) ; +#3835 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3836 = EDGE_CURVE ( 'NONE', #2703, #3361, #1369, .T. ) ; +#3837 = LINE ( 'NONE', #47, #2926 ) ; +#3838 = LINE ( 'NONE', #366, #1187 ) ; +#3839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884037900E-017 ) ) ; +#3840 = ADVANCED_FACE ( 'NONE', ( #3731 ), #57, .F. ) ; +#3841 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3842 = VECTOR ( 'NONE', #272, 1000.000000000000000 ) ; +#3843 = FACE_BOUND ( 'NONE', #3752, .T. ) ; +#3844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3845 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 65.56000000000003100 ) ) ; +#3846 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -15.00000000000000200, 67.55000000000002600 ) ) ; +#3847 = CARTESIAN_POINT ( 'NONE', ( -3.941328586700311800E-013, 23.69507608058621500, 27.20480178360177000 ) ) ; +#3848 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000006800, 2.499999999999987100, 77.50000000000002800 ) ) ; +#3849 = CYLINDRICAL_SURFACE ( 'NONE', #1388, 1.200000000000006600 ) ; +#3850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976805500E-015, 1.000000000000000000 ) ) ; +#3851 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3852 = VECTOR ( 'NONE', #2145, 1000.000000000000000 ) ; +#3853 = ORIENTED_EDGE ( 'NONE', *, *, #3313, .F. ) ; +#3854 = FACE_OUTER_BOUND ( 'NONE', #514, .T. ) ; +#3855 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 9.999999999999978700, 77.50000000000002800 ) ) ; +#3856 = VERTEX_POINT ( 'NONE', #743 ) ; +#3857 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 24.99999999989814000, 38.00964647528625300 ) ) ; +#3858 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999993500, 20.00000000000001800, 68.75000000000000000 ) ) ; +#3859 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3860 = CARTESIAN_POINT ( 'NONE', ( 2.212273441433323800, 3.677374591011474300, 77.48440911745542800 ) ) ; +#3861 = ORIENTED_EDGE ( 'NONE', *, *, #1651, .F. ) ; +#3862 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 25.00000000000000000, 38.01056079862051700 ) ) ; +#3863 = ORIENTED_EDGE ( 'NONE', *, *, #2844, .F. ) ; +#3864 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.90000000000000200, 36.20000000000000300 ) ) ; +#3865 = ADVANCED_FACE ( 'NONE', ( #968 ), #3639, .F. ) ; +#3866 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3867 = EDGE_CURVE ( 'NONE', #2194, #490, #1876, .T. ) ; +#3868 = ORIENTED_EDGE ( 'NONE', *, *, #4185, .F. ) ; +#3869 = VERTEX_POINT ( 'NONE', #3551 ) ; +#3870 = CARTESIAN_POINT ( 'NONE', ( 0.1325162751585624300, 0.07079536773185590700, 75.81484106229356700 ) ) ; +#3871 = ADVANCED_FACE ( 'NONE', ( #1749 ), #4391, .F. ) ; +#3872 = ORIENTED_EDGE ( 'NONE', *, *, #2740, .F. ) ; +#3873 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, 5.000000000000000000 ) ) ; +#3874 = ORIENTED_EDGE ( 'NONE', *, *, #510, .T. ) ; +#3875 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 23.51823578065458900, 26.28267790098770700 ) ) ; +#3876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3877 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 71.94000000000002600 ) ) ; +#3878 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 4.999999999999973400, 75.00000000000002800 ) ) ; +#3879 = EDGE_LOOP ( 'NONE', ( #4188, #21, #49, #107, #154 ) ) ; +#3880 = CARTESIAN_POINT ( 'NONE', ( 31.24999999999996400, 1.250000000000022600, 77.50000000000002800 ) ) ; +#3881 = DIRECTION ( 'NONE', ( 2.618453522039313400E-016, -1.000000000000000000, -2.618453522039313800E-016 ) ) ; +#3882 = ORIENTED_EDGE ( 'NONE', *, *, #3293, .T. ) ; +#3883 = AXIS2_PLACEMENT_3D ( 'NONE', #4012, #1935, #4337 ) ; +#3884 = AXIS2_PLACEMENT_3D ( 'NONE', #2418, #365, #2766 ) ; +#3885 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#3886 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -2.220446049250313700E-014, 80.00000000000002800 ) ) ; +#3887 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3889 = ADVANCED_FACE ( 'NONE', ( #2686 ), #2594, .F. ) ; +#3890 = CYLINDRICAL_SURFACE ( 'NONE', #3794, 5.050799999999994400 ) ; +#3891 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 16.13094401535673200, 19.57723520464897500 ) ) ; +#3892 = CARTESIAN_POINT ( 'NONE', ( 29.97227934801623700, 0.3543702251235568100, 75.37485200313481900 ) ) ; +#3893 = EDGE_LOOP ( 'NONE', ( #4232, #2183, #2411, #2511 ) ) ; +#3894 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3896 = ADVANCED_FACE ( 'NONE', ( #2796, #1643 ), #3212, .F. ) ; +#3897 = FACE_OUTER_BOUND ( 'NONE', #1034, .T. ) ; +#3898 = TOROIDAL_SURFACE ( 'NONE', #308, 1.250000000000000000, 1.250000000000000000 ) ; +#3899 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.749999999999972900, 77.50000000000002800 ) ) ; +#3900 = CYLINDRICAL_SURFACE ( 'NONE', #4262, 1.200000000000006600 ) ; +#3901 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3902 = VECTOR ( 'NONE', #3948, 1000.000000000000000 ) ; +#3903 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3904 = CARTESIAN_POINT ( 'NONE', ( 29.98589382345861400, 20.43010589705193400, 65.58198341379554100 ) ) ; +#3905 = EDGE_CURVE ( 'NONE', #3826, #1394, #60, .T. ) ; +#3906 = FACE_BOUND ( 'NONE', #2108, .T. ) ; +#3907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3908 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 18.44149786454211800, 12.98585396433966100 ) ) ; +#3909 = CIRCLE ( 'NONE', #457, 1.250000000000001100 ) ; +#3910 = AXIS2_PLACEMENT_3D ( 'NONE', #4062, #1995, #4395 ) ; +#3911 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3912 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3913 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 19.99999999999999300, 71.93999999999999800 ) ) ; +#3914 = ADVANCED_FACE ( 'NONE', ( #873 ), #2471, .F. ) ; +#3915 = VECTOR ( 'NONE', #3488, 1000.000000000000000 ) ; +#3916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3917 = ORIENTED_EDGE ( 'NONE', *, *, #3489, .F. ) ; +#3918 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.9292467443349496900, 5.030718250493740700 ) ) ; +#3919 = CYLINDRICAL_SURFACE ( 'NONE', #106, 1.199999999999999700 ) ; +#3920 = CARTESIAN_POINT ( 'NONE', ( 28.84993385654810500, 23.19029927348826100, 68.96168850860340200 ) ) ; +#3921 = EDGE_LOOP ( 'NONE', ( #1718, #937 ) ) ; +#3922 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3923 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 16.12922815710053500, 9.407511799264796100 ) ) ; +#3924 = ORIENTED_EDGE ( 'NONE', *, *, #2272, .T. ) ; +#3925 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3926 = ORIENTED_EDGE ( 'NONE', *, *, #3724, .T. ) ; +#3927 = EDGE_LOOP ( 'NONE', ( #3014, #1041, #1878, #2384 ) ) ; +#3928 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#3929 = VERTEX_POINT ( 'NONE', #2173 ) ; +#3930 = EDGE_CURVE ( 'NONE', #3144, #4066, #752, .T. ) ; +#3931 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3932 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999300, 12.10772564871085800, 12.38361405607597900 ) ) ; +#3933 = ORIENTED_EDGE ( 'NONE', *, *, #3452, .T. ) ; +#3934 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000002500, 20.21773427346564500, 71.94000000000008300 ) ) ; +#3935 = ORIENTED_EDGE ( 'NONE', *, *, #2272, .F. ) ; +#3936 = ADVANCED_FACE ( 'NONE', ( #4301 ), #3518, .T. ) ; +#3937 = ORIENTED_EDGE ( 'NONE', *, *, #3506, .T. ) ; +#3938 = CARTESIAN_POINT ( 'NONE', ( 28.07907090243434600, 0.8905392399071745400, 77.43424279277024900 ) ) ; +#3939 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 8.365671881969028300, 8.372641552872339700 ) ) ; +#3940 = VERTEX_POINT ( 'NONE', #2901 ) ; +#3941 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -15.00000000000000200, 69.95000000000004500 ) ) ; +#3942 = CARTESIAN_POINT ( 'NONE', ( -1.250000000000000000, 1.250000000000000000, 77.50000000000002800 ) ) ; +#3943 = VERTEX_POINT ( 'NONE', #829 ) ; +#3944 = CC_DESIGN_SECURITY_CLASSIFICATION ( #2756, ( #1590 ) ) ; +#3945 = CARTESIAN_POINT ( 'NONE', ( 0.1084700650270624800, 21.05504500097362100, 65.73213974115886100 ) ) ; +#3946 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000000, 3.749999999999972900, 77.50000000000002800 ) ) ; +#3947 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 19.57678997154306100, 32.73411871029703900 ) ) ; +#3948 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3949 = FACE_BOUND ( 'NONE', #4104, .T. ) ; +#3950 = AXIS2_PLACEMENT_3D ( 'NONE', #4125, #2061, #20 ) ; +#3951 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.025043959590893100, 1.600328091179180000 ) ) ; +#3952 = VECTOR ( 'NONE', #1039, 1000.000000000000000 ) ; +#3953 = TOROIDAL_SURFACE ( 'NONE', #2788, 1.250000000000000000, 1.250000000000000000 ) ; +#3954 = DIRECTION ( 'NONE', ( -6.938893903909173900E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3955 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, -5.000000000000022200, 75.00000000000002800 ) ) ; +#3956 = CIRCLE ( 'NONE', #2623, 1.199999999999999700 ) ; +#3957 = CIRCLE ( 'NONE', #2282, 3.189999999999998600 ) ; +#3958 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3959 = PLANE ( 'NONE', #3732 ) ; +#3960 = CYLINDRICAL_SURFACE ( 'NONE', #1864, 2.500000000000002200 ) ; +#3961 = VECTOR ( 'NONE', #2080, 1000.000000000000000 ) ; +#3962 = CARTESIAN_POINT ( 'NONE', ( 0.2522330730247281900, 0.01275685208050858500, 76.09432346314798700 ) ) ; +#3963 = VERTEX_POINT ( 'NONE', #3244 ) ; +#3964 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 3.359116094973569700, 0.3493694725275349200 ) ) ; +#3965 = AXIS2_PLACEMENT_3D ( 'NONE', #2453, #399, #2804 ) ; +#3966 = FACE_BOUND ( 'NONE', #2946, .T. ) ; +#3967 = CARTESIAN_POINT ( 'NONE', ( 29.91912211605602700, 4.999999999999992000, 76.19307411316604800 ) ) ; +#3968 = CARTESIAN_POINT ( 'NONE', ( 28.27117698964379100, -10.85019054138221700, 1.211392133205286200 ) ) ; +#3969 = ORIENTED_EDGE ( 'NONE', *, *, #3221, .T. ) ; +#3970 = CARTESIAN_POINT ( 'NONE', ( 22.00000000000000000, -25.00000000000000700, 58.80000000000000400 ) ) ; +#3971 = ORIENTED_EDGE ( 'NONE', *, *, #411, .F. ) ; +#3972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3973 = ORIENTED_EDGE ( 'NONE', *, *, #1835, .T. ) ; +#3974 = VERTEX_POINT ( 'NONE', #813 ) ; +#3975 = ORIENTED_EDGE ( 'NONE', *, *, #2063, .T. ) ; +#3976 = CARTESIAN_POINT ( 'NONE', ( 2.123315995107435800, 1.168825414418667200, 77.47367951980378100 ) ) ; +#3977 = EDGE_LOOP ( 'NONE', ( #3106, #3621, #3712, #3818 ) ) ; +#3978 = EDGE_LOOP ( 'NONE', ( #4227, #101, #1108, #1859 ) ) ; +#3979 = ORIENTED_EDGE ( 'NONE', *, *, #3982, .F. ) ; +#3980 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.50000000000000400, 6.299999999999995400 ) ) ; +#3981 = ORIENTED_EDGE ( 'NONE', *, *, #1213, .T. ) ; +#3982 = EDGE_CURVE ( 'NONE', #3361, #1143, #1984, .T. ) ; +#3983 = ORIENTED_EDGE ( 'NONE', *, *, #2198, .T. ) ; +#3984 = ORIENTED_EDGE ( 'NONE', *, *, #3751, .F. ) ; +#3985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3986 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3987 = CARTESIAN_POINT ( 'NONE', ( 27.50000000000000000, 9.999999999999976900, 77.50000000000002800 ) ) ; +#3988 = AXIS2_PLACEMENT_3D ( 'NONE', #4055, #1986, #4384 ) ; +#3989 = PLANE ( 'NONE', #72 ) ; +#3990 = FACE_OUTER_BOUND ( 'NONE', #4117, .T. ) ; +#3991 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.50000000000000000, 2.500000000000000000 ) ) ; +#3992 = FACE_OUTER_BOUND ( 'NONE', #3610, .T. ) ; +#3993 = VECTOR ( 'NONE', #3310, 1000.000000000000000 ) ; +#3994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9961946980917455500, 0.08715574274765829100 ) ) ; +#3995 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.775557561562891400E-016 ) ) ; +#3996 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -107.4621125123532700, 79.99999999999998600 ) ) ; +#3997 = FACE_OUTER_BOUND ( 'NONE', #1894, .T. ) ; +#3998 = CIRCLE ( 'NONE', #947, 5.000000000000000000 ) ; +#3999 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4000 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781444500E-015, 0.0000000000000000000 ) ) ; +#4001 = VECTOR ( 'NONE', #315, 1000.000000000000000 ) ; +#4002 = EDGE_LOOP ( 'NONE', ( #286, #1884, #674, #1636, #471, #666, #1351, #2113 ) ) ; +#4003 = EDGE_CURVE ( 'NONE', #4159, #3478, #3300, .T. ) ; +#4004 = FACE_BOUND ( 'NONE', #1724, .T. ) ; +#4005 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4006 = CIRCLE ( 'NONE', #1635, 2.499999999999998700 ) ; +#4007 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.387778780781446500E-015, 0.0000000000000000000 ) ) ; +#4008 = EDGE_LOOP ( 'NONE', ( #2237, #2336, #3380, #542 ) ) ; +#4009 = CARTESIAN_POINT ( 'NONE', ( 29.99229009476729500, 4.476896896326452200, 75.22171533840322900 ) ) ; +#4010 = VECTOR ( 'NONE', #2611, 1000.000000000000000 ) ; +#4011 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4012 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.999999999999978700, 75.00000000000002800 ) ) ; +#4013 = VERTEX_POINT ( 'NONE', #3941 ) ; +#4014 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4015 = AXIS2_PLACEMENT_3D ( 'NONE', #902, #3317, #1236 ) ; +#4016 = VERTEX_POINT ( 'NONE', #2556 ) ; +#4017 = ORIENTED_EDGE ( 'NONE', *, *, #2302, .F. ) ; +#4018 = VERTEX_POINT ( 'NONE', #1504 ) ; +#4019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4020 = AXIS2_PLACEMENT_3D ( 'NONE', #3668, #1563, #3999 ) ; +#4021 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4022 = VERTEX_POINT ( 'NONE', #157 ) ; +#4023 = ORIENTED_EDGE ( 'NONE', *, *, #2522, .F. ) ; +#4024 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999993500, 20.00000000000001800, 65.56000000000000200 ) ) ; +#4025 = ORIENTED_EDGE ( 'NONE', *, *, #3867, .T. ) ; +#4026 = CARTESIAN_POINT ( 'NONE', ( 1.149565055880901200, 23.18969448306912500, 68.97061410601483500 ) ) ; +#4027 = ORIENTED_EDGE ( 'NONE', *, *, #2972, .F. ) ; +#4028 = ORIENTED_EDGE ( 'NONE', *, *, #1136, .T. ) ; +#4029 = VERTEX_POINT ( 'NONE', #2451 ) ; +#4030 = EDGE_CURVE ( 'NONE', #1143, #1160, #3402, .T. ) ; +#4031 = CARTESIAN_POINT ( 'NONE', ( 1.206091987257273300E-015, 1.301042606982605300E-015, 78.75000000000002800 ) ) ; +#4032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.301042606982605100E-016, -1.000000000000000000 ) ) ; +#4033 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.611997062423292900, 5.606999049698152300 ) ) ; +#4034 = AXIS2_PLACEMENT_3D ( 'NONE', #2076, #2777, #687 ) ; +#4035 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.00000000000000000, -3.252606517456512900E-015 ) ) ; +#4036 = VECTOR ( 'NONE', #2747, 1000.000000000000000 ) ; +#4037 = VECTOR ( 'NONE', #2041, 1000.000000000000000 ) ; +#4038 = LINE ( 'NONE', #2388, #3252 ) ; +#4039 = LINE ( 'NONE', #2310, #380 ) ; +#4040 = VECTOR ( 'NONE', #4408, 1000.000000000000000 ) ; +#4041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4042 = CARTESIAN_POINT ( 'NONE', ( -3.987065128864182800E-013, 9.691104115230624300, 3.089847921485340700 ) ) ; +#4043 = CARTESIAN_POINT ( 'NONE', ( 28.99254046760120900, 4.792038867297894600, 77.01249153920434800 ) ) ; +#4044 = CYLINDRICAL_SURFACE ( 'NONE', #503, 1.199999999999999700 ) ; +#4045 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.301042606982605100E-016, 1.000000000000000000 ) ) ; +#4046 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.940206225469869300, 20.53158018112177500 ) ) ; +#4047 = FACE_OUTER_BOUND ( 'NONE', #1734, .T. ) ; +#4048 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, -15.00000000000000200, 68.75000000000002800 ) ) ; +#4049 = ORIENTED_EDGE ( 'NONE', *, *, #3427, .T. ) ; +#4050 = CIRCLE ( 'NONE', #2342, 3.189999999999998600 ) ; +#4051 = ORIENTED_EDGE ( 'NONE', *, *, #2853, .F. ) ; +#4052 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 12.84412064407166900, 5.674588898678505800 ) ) ; +#4053 = VERTEX_POINT ( 'NONE', #3158 ) ; +#4054 = ORIENTED_EDGE ( 'NONE', *, *, #2962, .T. ) ; +#4055 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -4.991006225469872600, 16.15537812313072400 ) ) ; +#4056 = ORIENTED_EDGE ( 'NONE', *, *, #2893, .F. ) ; +#4057 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -3.550799999999999700, 22.10328947826993600 ) ) ; +#4058 = ORIENTED_EDGE ( 'NONE', *, *, #3763, .F. ) ; +#4059 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ; +#4060 = ORIENTED_EDGE ( 'NONE', *, *, #4302, .F. ) ; +#4061 = ORIENTED_EDGE ( 'NONE', *, *, #935, .T. ) ; +#4062 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -15.49999999999999500, 42.49999999999999300 ) ) ; +#4063 = EDGE_LOOP ( 'NONE', ( #2723, #2960, #1612, #358 ) ) ; +#4064 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 14.13588277708087500, 15.42995526640311800 ) ) ; +#4065 = ADVANCED_FACE ( 'NONE', ( #1548 ), #548, .T. ) ; +#4066 = VERTEX_POINT ( 'NONE', #2095 ) ; +#4067 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -20.00000000000000700, 72.50000000000001400 ) ) ; +#4068 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.550800000000000600, 21.18695830425251000 ) ) ; +#4069 = ORIENTED_EDGE ( 'NONE', *, *, #1568, .F. ) ; +#4070 = EDGE_CURVE ( 'NONE', #1160, #1576, #4077, .T. ) ; +#4071 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.220446049250313700E-014, 80.00000000000002800 ) ) ; +#4072 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -22.90000000000000200, 36.20000000000000300 ) ) ; +#4073 = VECTOR ( 'NONE', #2965, 1000.000000000000000 ) ; +#4074 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#4075 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4076 = FACE_OUTER_BOUND ( 'NONE', #3558, .T. ) ; +#4077 = CIRCLE ( 'NONE', #2700, 2.499999999999992900 ) ; +#4078 = AXIS2_PLACEMENT_3D ( 'NONE', #2599, #2955, #198 ) ; +#4079 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999993500, 20.00000000000001800, 71.93999999999999800 ) ) ; +#4080 = AXIS2_PLACEMENT_3D ( 'NONE', #1367, #3810, #1709 ) ; +#4081 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 69.95000000000001700 ) ) ; +#4082 = VECTOR ( 'NONE', #1929, 1000.000000000000000 ) ; +#4083 = VECTOR ( 'NONE', #4254, 1000.000000000000000 ) ; +#4084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4085 = ADVANCED_FACE ( 'NONE', ( #550 ), #1323, .T. ) ; +#4086 = CIRCLE ( 'NONE', #2001, 1.200000000000006600 ) ; +#4087 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999998600, -14.99999999999998000, 71.94000000000002600 ) ) ; +#4088 = EDGE_LOOP ( 'NONE', ( #2813, #2832, #3100 ) ) ; +#4089 = FACE_OUTER_BOUND ( 'NONE', #139, .T. ) ; +#4090 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -112.6671866812881400, 20.50573000932254800 ) ) ; +#4091 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 19.99999999999999600, 68.75000000000000000 ) ) ; +#4092 = CIRCLE ( 'NONE', #1686, 2.500000000000003600 ) ; +#4093 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884037400E-016, 17.11435492941571100, 22.06026870892345900 ) ) ; +#4094 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ; +#4095 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -25.00000000000000000, -3.252606517456512900E-015 ) ) ; +#4096 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.49999999999999500, 42.49999999999999300 ) ) ; +#4097 = FACE_OUTER_BOUND ( 'NONE', #710, .T. ) ; +#4098 = EDGE_CURVE ( 'NONE', #1304, #2450, #2255, .T. ) ; +#4099 = ORIENTED_EDGE ( 'NONE', *, *, #657, .F. ) ; +#4100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4101 = ORIENTED_EDGE ( 'NONE', *, *, #3549, .F. ) ; +#4102 = AXIS2_PLACEMENT_3D ( 'NONE', #1741, #4163, #2671 ) ; +#4103 = ADVANCED_FACE ( 'NONE', ( #3190 ), #2150, .F. ) ; +#4104 = EDGE_LOOP ( 'NONE', ( #1914, #1960, #1967, #1994, #2007, #2049 ) ) ; +#4105 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 2.499999999999993800, 75.00000000000002800 ) ) ; +#4106 = VERTEX_POINT ( 'NONE', #2966 ) ; +#4107 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 6.121479385648259000, 6.750483277851350800 ) ) ; +#4108 = CARTESIAN_POINT ( 'NONE', ( 1.599999999999999900, 19.99999999999999600, 65.56000000000000200 ) ) ; +#4109 = ORIENTED_EDGE ( 'NONE', *, *, #1373, .T. ) ; +#4110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4111 = ORIENTED_EDGE ( 'NONE', *, *, #2764, .F. ) ; +#4112 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#4113 = ORIENTED_EDGE ( 'NONE', *, *, #1256, .F. ) ; +#4114 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4115 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4116 = VERTEX_POINT ( 'NONE', #208 ) ; +#4117 = EDGE_LOOP ( 'NONE', ( #1731, #479, #2507, #4412 ) ) ; +#4118 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.90000000000000200, 33.80000000000000400 ) ) ; +#4119 = ORIENTED_EDGE ( 'NONE', *, *, #3519, .F. ) ; +#4120 = DIRECTION ( 'NONE', ( 1.000000000000000000, 9.648735898058287700E-016, 1.673788867586185700E-031 ) ) ; +#4121 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999998900, 80.00000000000002800 ) ) ; +#4122 = EDGE_CURVE ( 'NONE', #2385, #722, #3075, .T. ) ; +#4123 = ADVANCED_FACE ( 'NONE', ( #318 ), #556, .F. ) ; +#4124 = LINE ( 'NONE', #2734, #4036 ) ; +#4125 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -4.991006225469872600, 16.15537812313072400 ) ) ; +#4126 = TOROIDAL_SURFACE ( 'NONE', #3088, 1.250000000000000000, 1.250000000000000000 ) ; +#4127 = LINE ( 'NONE', #4090, #4037 ) ; +#4128 = VECTOR ( 'NONE', #2371, 1000.000000000000000 ) ; +#4129 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #183 ) ) ; +#4130 = CYLINDRICAL_SURFACE ( 'NONE', #2572, 1.199999999999999700 ) ; +#4131 = LINE ( 'NONE', #4067, #2313 ) ; +#4132 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999998400, -13.79999999999998100, 68.75000000000002800 ) ) ; +#4133 = CIRCLE ( 'NONE', #2321, 1.250000000000001100 ) ; +#4134 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 20.00000000000000000, 40.00000000000002800 ) ) ; +#4135 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.301042606982605100E-016, -1.000000000000000000 ) ) ; +#4136 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 4.999999999999978700, 76.25000000000002800 ) ) ; +#4137 = CYLINDRICAL_SURFACE ( 'NONE', #1245, 5.050800000000001500 ) ; +#4138 = AXIS2_PLACEMENT_3D ( 'NONE', #773, #1771, #3192 ) ; +#4139 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 68.75000000000002800 ) ) ; +#4140 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 21.83734630602699400, 20.40807489817362000 ) ) ; +#4141 = ORIENTED_EDGE ( 'NONE', *, *, #3635, .T. ) ; +#4142 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4143 = ORIENTED_EDGE ( 'NONE', *, *, #1264, .T. ) ; +#4144 = ADVANCED_FACE ( 'NONE', ( #1225 ), #3898, .T. ) ; +#4145 = VECTOR ( 'NONE', #846, 1000.000000000000000 ) ; +#4146 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.059793774530124900, 10.46841981887819800 ) ) ; +#4147 = ORIENTED_EDGE ( 'NONE', *, *, #492, .F. ) ; +#4148 = ORIENTED_EDGE ( 'NONE', *, *, #1494, .F. ) ; +#4149 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -13.00000000000000200, 2.500000000000000000 ) ) ; +#4150 = ORIENTED_EDGE ( 'NONE', *, *, #1811, .T. ) ; +#4151 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -20.00000000000000400, 55.50000000000000700 ) ) ; +#4152 = ORIENTED_EDGE ( 'NONE', *, *, #1192, .T. ) ; +#4153 = EDGE_CURVE ( 'NONE', #538, #781, #639, .T. ) ; +#4154 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 20.00000000000000000, 40.00000000000002800 ) ) ; +#4155 = VERTEX_POINT ( 'NONE', #2981 ) ; +#4156 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -22.50000000000000000, 10.00000000000000700 ) ) ; +#4157 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -4.991006225469872600, 16.15537812313072400 ) ) ; +#4158 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 19.32049555248650600, 30.91930241447284500 ) ) ; +#4159 = VERTEX_POINT ( 'NONE', #3322 ) ; +#4160 = AXIS2_PLACEMENT_3D ( 'NONE', #2785, #3494, #1403 ) ; +#4161 = AXIS2_PLACEMENT_3D ( 'NONE', #2069, #28, #2422 ) ; +#4162 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4163 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4164 = VERTEX_POINT ( 'NONE', #2285 ) ; +#4165 = ORIENTED_EDGE ( 'NONE', *, *, #1781, .F. ) ; +#4166 = EDGE_LOOP ( 'NONE', ( #2240, #2280, #2319, #2329 ) ) ; +#4167 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, -12.99999999999999800, 1.379105163401561800E-014 ) ) ; +#4168 = VERTEX_POINT ( 'NONE', #3681 ) ; +#4169 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -7.625158136161789500E-017, 1.000000000000000000 ) ) ; +#4170 = ADVANCED_FACE ( 'NONE', ( #2029 ), #222, .T. ) ; +#4171 = ORIENTED_EDGE ( 'NONE', *, *, #516, .T. ) ; +#4172 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 24.99999999999999600, 80.00000000000001400 ) ) ; +#4173 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.91490208448722000, 36.34503788334138400 ) ) ; +#4174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4175 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.301042606982605100E-016, -1.000000000000000000 ) ) ; +#4176 = CARTESIAN_POINT ( 'NONE', ( 1.920929097565593000, 4.109460760092847700, 77.43424279277026300 ) ) ; +#4177 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 25.00000000000000400, 40.00000000000002800 ) ) ; +#4178 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 7.550799999999994400, 67.00000000000002800 ) ) ; +#4179 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -20.00000000000000400, 35.00000000000000000 ) ) ; +#4180 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4181 = VECTOR ( 'NONE', #463, 1000.000000000000000 ) ; +#4182 = LOCAL_TIME ( 15, 7, 17.00000000000000000, #634 ) ; +#4183 = EDGE_LOOP ( 'NONE', ( #2815, #2985 ) ) ; +#4184 = CARTESIAN_POINT ( 'NONE', ( 0.03449169846117161600, 0.2975267555182638500, 75.42654006001969000 ) ) ; +#4185 = EDGE_CURVE ( 'NONE', #2559, #2054, #434, .T. ) ; +#4186 = LINE ( 'NONE', #2040, #549 ) ; +#4187 = VECTOR ( 'NONE', #2242, 1000.000000000000000 ) ; +#4188 = ORIENTED_EDGE ( 'NONE', *, *, #4153, .F. ) ; +#4189 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, 67.54999999999999700 ) ) ; +#4190 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 23.04666413804096000, 24.35251737424649200 ) ) ; +#4191 = FACE_BOUND ( 'NONE', #3097, .T. ) ; +#4192 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -25.00100000000001500, 55.00000000000000700 ) ) ; +#4193 = TOROIDAL_SURFACE ( 'NONE', #502, 1.250000000000003600, 1.250000000000000000 ) ; +#4194 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4195 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4196 = PLANE ( 'NONE', #1940 ) ; +#4197 = CIRCLE ( 'NONE', #1762, 1.199999999999999700 ) ; +#4198 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4199 = ADVANCED_FACE ( 'NONE', ( #1130 ), #121, .T. ) ; +#4200 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4201 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-017 ) ) ; +#4202 = CIRCLE ( 'NONE', #867, 1.199999999999999700 ) ; +#4203 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#4204 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -5.431212450939743700, 11.12379794200893800 ) ) ; +#4205 = ADVANCED_FACE ( 'NONE', ( #2974 ), #2735, .T. ) ; +#4206 = CYLINDRICAL_SURFACE ( 'NONE', #1819, 2.500000000000002200 ) ; +#4207 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 35.00000000000000000 ) ) ; +#4208 = ORIENTED_EDGE ( 'NONE', *, *, #1900, .F. ) ; +#4209 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 20.74056858183671200, 17.63703814372011500 ) ) ; +#4210 = CARTESIAN_POINT ( 'NONE', ( 29.93931473674872000, 0.2116404591729588700, 75.55091053768387600 ) ) ; +#4211 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999996100, 4.999999999999993800, 77.50000000000002800 ) ) ; +#4212 = VECTOR ( 'NONE', #955, 1000.000000000000000 ) ; +#4213 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999993600, 20.00000000000001800, 68.75000000000000000 ) ) ; +#4214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4215 = ORIENTED_EDGE ( 'NONE', *, *, #1631, .F. ) ; +#4216 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 7.550799999999996200, 79.99999999999997200 ) ) ; +#4217 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4218 = EDGE_CURVE ( 'NONE', #3806, #781, #1012, .T. ) ; +#4219 = CARTESIAN_POINT ( 'NONE', ( 1.206091987257273300E-015, 1.301042606982605300E-015, 77.50000000000002800 ) ) ; +#4220 = EDGE_LOOP ( 'NONE', ( #361, #1349 ) ) ; +#4221 = CARTESIAN_POINT ( 'NONE', ( 1.206091987257273300E-015, 1.301042606982605300E-015, 76.25000000000002800 ) ) ; +#4222 = ORIENTED_EDGE ( 'NONE', *, *, #3581, .T. ) ; +#4223 = CARTESIAN_POINT ( 'NONE', ( 29.89201132248861400, 21.05247266519028700, 65.73137783208173300 ) ) ; +#4224 = ORIENTED_EDGE ( 'NONE', *, *, #3738, .F. ) ; +#4225 = ADVANCED_FACE ( 'NONE', ( #3683 ), #3580, .F. ) ; +#4226 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -5.000000000000020400, 77.50000000000002800 ) ) ; +#4227 = ORIENTED_EDGE ( 'NONE', *, *, #2059, .F. ) ; +#4228 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 13.63374123620980200, 14.67738775159867300 ) ) ; +#4229 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4230 = ORIENTED_EDGE ( 'NONE', *, *, #2354, .T. ) ; +#4231 = ADVANCED_FACE ( 'NONE', ( #911 ), #48, .F. ) ; +#4232 = ORIENTED_EDGE ( 'NONE', *, *, #3098, .F. ) ; +#4233 = MECHANICAL_CONTEXT ( 'NONE', #1477, 'mechanical' ) ; +#4234 = ORIENTED_EDGE ( 'NONE', *, *, #2515, .F. ) ; +#4235 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -8.673617379884036700E-017 ) ) ; +#4236 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000400, 2.297351335860259500, 5.239341011614535600 ) ) ; +#4237 = CARTESIAN_POINT ( 'NONE', ( 28.93590742013463300, 23.08408546248025000, 69.59266483350244000 ) ) ; +#4238 = ORIENTED_EDGE ( 'NONE', *, *, #4255, .F. ) ; +#4239 = AXIS2_PLACEMENT_3D ( 'NONE', #3200, #1122, #3555 ) ; +#4240 = AXIS2_PLACEMENT_3D ( 'NONE', #4242, #513, #2924 ) ; +#4241 = ORIENTED_EDGE ( 'NONE', *, *, #1568, .T. ) ; +#4242 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -5.000000000000020400, 77.50000000000002800 ) ) ; +#4243 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 14.77861398833549900, 7.708105781055943200 ) ) ; +#4244 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000006800, 2.499999999999986700, 80.00000000000002800 ) ) ; +#4245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4246 = LINE ( 'NONE', #675, #592 ) ; +#4247 = FACE_OUTER_BOUND ( 'NONE', #2670, .T. ) ; +#4248 = ADVANCED_FACE ( 'NONE', ( #2638 ), #2792, .F. ) ; +#4249 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#4250 = VERTEX_POINT ( 'NONE', #3148 ) ; +#4251 = CIRCLE ( 'NONE', #1795, 5.050799999999994400 ) ; +#4252 = VECTOR ( 'NONE', #4414, 1000.000000000000000 ) ; +#4253 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000001100, 13.64152903206444000, 14.67064344082526600 ) ) ; +#4254 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4255 = EDGE_CURVE ( 'NONE', #4155, #2710, #1924, .T. ) ; +#4256 = LINE ( 'NONE', #74, #2542 ) ; +#4257 = VECTOR ( 'NONE', #2323, 1000.000000000000000 ) ; +#4258 = CARTESIAN_POINT ( 'NONE', ( 28.44453203835422900, 0.5356421119863978800, 77.31844400217569600 ) ) ; +#4259 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 11.57297802081468400, 4.535086636304562500 ) ) ; +#4260 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #2499, #442 ) ; +#4261 = CIRCLE ( 'NONE', #148, 2.500000000000000000 ) ; +#4262 = AXIS2_PLACEMENT_3D ( 'NONE', #3690, #1585, #4019 ) ; +#4263 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 4.999999999999978700, 76.25000000000002800 ) ) ; +#4264 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4265 = CARTESIAN_POINT ( 'NONE', ( 0.01453776121369145000, 20.43546794293721900, 65.58265788465762100 ) ) ; +#4266 = CYLINDRICAL_SURFACE ( 'NONE', #1321, 5.050799999999994400 ) ; +#4267 = ORIENTED_EDGE ( 'NONE', *, *, #3649, .F. ) ; +#4268 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.90000000000000200, 31.81000000000000600 ) ) ; +#4269 = CARTESIAN_POINT ( 'NONE', ( 29.99999999999999600, 20.00000000000000000, 38.16511231640558300 ) ) ; +#4270 = LINE ( 'NONE', #3324, #1397 ) ; +#4271 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4272 = ORIENTED_EDGE ( 'NONE', *, *, #4153, .T. ) ; +#4273 = ORIENTED_EDGE ( 'NONE', *, *, #4030, .F. ) ; +#4274 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.550799999999996200, 15.49999999999998400 ) ) ; +#4275 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 4.477647518527053400, 5.939794790593554200 ) ) ; +#4276 = ORIENTED_EDGE ( 'NONE', *, *, #238, .F. ) ; +#4277 = ORIENTED_EDGE ( 'NONE', *, *, #3102, .T. ) ; +#4278 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4279 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4280 = VERTEX_POINT ( 'NONE', #2106 ) ; +#4281 = EDGE_CURVE ( 'NONE', #781, #2703, #816, .T. ) ; +#4282 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 4.999999999999993800, 75.00000000000002800 ) ) ; +#4283 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4284 = EDGE_LOOP ( 'NONE', ( #2626, #2778, #2914, #3289, #3439 ) ) ; +#4285 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4286 = ORIENTED_EDGE ( 'NONE', *, *, #3260, .F. ) ; +#4287 = ORIENTED_EDGE ( 'NONE', *, *, #3802, .F. ) ; +#4288 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4289 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 2.706027946176142500, 0.2204787915044295100 ) ) ; +#4290 = ORIENTED_EDGE ( 'NONE', *, *, #2807, .F. ) ; +#4291 = CARTESIAN_POINT ( 'NONE', ( 29.74776692697528100, 4.987243147919484100, 76.09432346314797300 ) ) ; +#4292 = ORIENTED_EDGE ( 'NONE', *, *, #1768, .T. ) ; +#4293 = CARTESIAN_POINT ( 'NONE', ( 27.73633764561900600, -11.15091997072364200, 0.8093405423471592400 ) ) ; +#4294 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4295 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.99999999999998900, 80.00000000000002800 ) ) ; +#4296 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.301042606982605100E-016 ) ) ; +#4297 = LINE ( 'NONE', #1115, #3397 ) ; +#4298 = APPROVAL_DATE_TIME ( #748, #1832 ) ; +#4299 = CARTESIAN_POINT ( 'NONE', ( 2.353815494508174000, 1.639759102576558500, 77.49674497874248400 ) ) ; +#4300 = CIRCLE ( 'NONE', #1945, 1.199999999999999700 ) ; +#4301 = FACE_OUTER_BOUND ( 'NONE', #996, .T. ) ; +#4302 = EDGE_CURVE ( 'NONE', #2575, #1202, #1689, .T. ) ; +#4303 = FACE_BOUND ( 'NONE', #1804, .T. ) ; +#4304 = VECTOR ( 'NONE', #3835, 1000.000000000000000 ) ; +#4305 = CIRCLE ( 'NONE', #3273, 1.000000000000000900 ) ; +#4306 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.00000000000000200, 2.500000000000000000 ) ) ; +#4307 = CIRCLE ( 'NONE', #909, 3.189999999999998600 ) ; +#4308 = CARTESIAN_POINT ( 'NONE', ( 8.000000000000000000, 25.00100000000000800, 58.80000000000001100 ) ) ; +#4309 = DIRECTION ( 'NONE', ( 3.469446951953616200E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4310 = AXIS2_PLACEMENT_3D ( 'NONE', #1903, #2610, #3986 ) ; +#4311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-017, -1.000000000000000000 ) ) ; +#4312 = LINE ( 'NONE', #2395, #885 ) ; +#4313 = ORIENTED_EDGE ( 'NONE', *, *, #1532, .T. ) ; +#4314 = CIRCLE ( 'NONE', #749, 2.500000000000002200 ) ; +#4315 = ORIENTED_EDGE ( 'NONE', *, *, #3150, .F. ) ; +#4316 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -13.00000000000000200, 2.500000000000000000 ) ) ; +#4317 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4318 = ORIENTED_EDGE ( 'NONE', *, *, #2919, .F. ) ; +#4319 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -20.00000000000000700, 72.50000000000001400 ) ) ; +#4320 = EDGE_LOOP ( 'NONE', ( #2062, #356, #4025, #2290 ) ) ; +#4321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891400E-016, -1.000000000000000000 ) ) ; +#4322 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000200, 65.56000000000003100 ) ) ; +#4323 = ORIENTED_EDGE ( 'NONE', *, *, #3790, .F. ) ; +#4324 = EDGE_LOOP ( 'NONE', ( #1950, #2004, #2057, #2176 ) ) ; +#4325 = ORIENTED_EDGE ( 'NONE', *, *, #1395, .T. ) ; +#4326 = EDGE_CURVE ( 'NONE', #2133, #2107, #3448, .T. ) ; +#4327 = ORIENTED_EDGE ( 'NONE', *, *, #2166, .F. ) ; +#4328 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4329 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.991006225469872600, 16.15537812313072400 ) ) ; +#4330 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 20.00000000000001800, 68.75000000000000000 ) ) ; +#4331 = ORIENTED_EDGE ( 'NONE', *, *, #3808, .T. ) ; +#4332 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4333 = CARTESIAN_POINT ( 'NONE', ( 30.00043791116636500, 4.058615250669910200, 75.02911346620030000 ) ) ; +#4334 = ORIENTED_EDGE ( 'NONE', *, *, #4302, .T. ) ; +#4335 = AXIS2_PLACEMENT_3D ( 'NONE', #2440, #388, #2791 ) ; +#4336 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, -25.00000000000000400, 38.19000000000000500 ) ) ; +#4337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4338 = ORIENTED_EDGE ( 'NONE', *, *, #2582, .F. ) ; +#4339 = CARTESIAN_POINT ( 'NONE', ( 0.06775349048930016900, 20.84680143534428300, 71.83289596033405600 ) ) ; +#4340 = ORIENTED_EDGE ( 'NONE', *, *, #2745, .T. ) ; +#4341 = LINE ( 'NONE', #3096, #3246 ) ; +#4342 = VECTOR ( 'NONE', #3167, 1000.000000000000000 ) ; +#4343 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -22.50000000000000000, 10.00000000000000700 ) ) ; +#4344 = CYLINDRICAL_SURFACE ( 'NONE', #892, 3.189999999999998600 ) ; +#4345 = CARTESIAN_POINT ( 'NONE', ( -0.0004549392513706257200, 4.056265010053572000, 75.02834858604768400 ) ) ; +#4346 = LINE ( 'NONE', #995, #2537 ) ; +#4347 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4348 = CARTESIAN_POINT ( 'NONE', ( 1.132021122954816700, 23.16886253511968600, 68.32576257235078300 ) ) ; +#4349 = LINE ( 'NONE', #3531, #3254 ) ; +#4350 = LINE ( 'NONE', #591, #3457 ) ; +#4351 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.602085213965210600E-016, 1.000000000000000000 ) ) ; +#4352 = EDGE_CURVE ( 'NONE', #1550, #2954, #1815, .T. ) ; +#4353 = CIRCLE ( 'NONE', #254, 2.500000000000002200 ) ; +#4354 = VECTOR ( 'NONE', #2264, 1000.000000000000000 ) ; +#4355 = CARTESIAN_POINT ( 'NONE', ( 30.00100000000000100, -15.50000000000000400, 8.699999999999995700 ) ) ; +#4356 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 5.234596384712878200, 0.8740674697117176700 ) ) ; +#4357 = VERTEX_POINT ( 'NONE', #80 ) ; +#4358 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 9.999999999999994700, 77.50000000000002800 ) ) ; +#4359 = CYLINDRICAL_SURFACE ( 'NONE', #2567, 3.189999999999998600 ) ; +#4360 = CARTESIAN_POINT ( 'NONE', ( 3.405199682222536300, -11.88500195900508200, 0.2437871935713665200 ) ) ; +#4361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4362 = EDGE_LOOP ( 'NONE', ( #1862, #1844, #2687, #2448 ) ) ; +#4363 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.059793774530124900, 10.46841981887819800 ) ) ; +#4364 = ORIENTED_EDGE ( 'NONE', *, *, #3624, .F. ) ; +#4365 = ORIENTED_EDGE ( 'NONE', *, *, #1007, .T. ) ; +#4366 = ORIENTED_EDGE ( 'NONE', *, *, #4185, .T. ) ; +#4367 = EDGE_LOOP ( 'NONE', ( #676, #2013, #2343, #2736, #2855, #3156 ) ) ; +#4368 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 7.998275394560095300, 8.073019510034980000 ) ) ; +#4369 = VERTEX_POINT ( 'NONE', #2476 ) ; +#4370 = VERTEX_POINT ( 'NONE', #1107 ) ; +#4371 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 19.99999999999998900, 80.00000000000002800 ) ) ; +#4372 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 25.00000000000000400, 40.00000000000004300 ) ) ; +#4373 = ORIENTED_EDGE ( 'NONE', *, *, #2396, .T. ) ; +#4374 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4375 = EDGE_LOOP ( 'NONE', ( #660, #673, #724, #740, #787, #803, #847, #883, #889, #949 ) ) ; +#4376 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4377 = ORIENTED_EDGE ( 'NONE', *, *, #2814, .F. ) ; +#4378 = VERTEX_POINT ( 'NONE', #3181 ) ; +#4379 = EDGE_CURVE ( 'NONE', #1683, #1797, #2534, .T. ) ; +#4380 = CARTESIAN_POINT ( 'NONE', ( -6.938893903907228400E-014, 2.499999999999993800, 78.75000000000002800 ) ) ; +#4381 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, 14.03504272903294300, 6.864401645140483200 ) ) ; +#4382 = EDGE_LOOP ( 'NONE', ( #3926, #1175 ) ) ; +#4383 = AXIS2_PLACEMENT_3D ( 'NONE', #2053, #2752, #697 ) ; +#4384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4385 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -25.00000000000001100, 72.50000000000001400 ) ) ; +#4386 = VECTOR ( 'NONE', #1431, 1000.000000000000000 ) ; +#4387 = APPROVAL_PERSON_ORGANIZATION ( #869, #1832, #3593 ) ; +#4388 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4389 = ADVANCED_FACE ( 'NONE', ( #4247 ), #593, .F. ) ; +#4390 = LINE ( 'NONE', #2010, #1748 ) ; +#4391 = CYLINDRICAL_SURFACE ( 'NONE', #1088, 0.5000000000000004400 ) ; +#4392 = ORIENTED_EDGE ( 'NONE', *, *, #1877, .T. ) ; +#4393 = FACE_BOUND ( 'NONE', #1162, .T. ) ; +#4394 = VECTOR ( 'NONE', #3822, 1000.000000000000000 ) ; +#4395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4396 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 18.48871052810992700, 12.95199058868096400 ) ) ; +#4397 = LINE ( 'NONE', #250, #3737 ) ; +#4398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.301042606982605100E-016 ) ) ; +#4399 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.301042606982605100E-016 ) ) ; +#4400 = LINE ( 'NONE', #1837, #3530 ) ; +#4401 = EDGE_LOOP ( 'NONE', ( #196, #1489, #3719, #2776 ) ) ; +#4402 = EDGE_CURVE ( 'NONE', #2703, #4413, #1497, .T. ) ; +#4403 = CYLINDRICAL_SURFACE ( 'NONE', #1993, 5.000000000000000900 ) ; +#4404 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -0.0000000000000000000, 5.000000000000000000 ) ) ; +#4405 = ORIENTED_EDGE ( 'NONE', *, *, #2587, .T. ) ; +#4406 = ORIENTED_EDGE ( 'NONE', *, *, #3624, .T. ) ; +#4407 = CARTESIAN_POINT ( 'NONE', ( 28.39999999999998400, -14.99999999999998000, 68.75000000000002800 ) ) ; +#4408 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4409 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4410 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 7.550800000000003300, 67.00000000000002800 ) ) ; +#4411 = VERTEX_POINT ( 'NONE', #1459 ) ; +#4412 = ORIENTED_EDGE ( 'NONE', *, *, #1705, .F. ) ; +#4413 = VERTEX_POINT ( 'NONE', #2851 ) ; +#4414 = DIRECTION ( 'NONE', ( -1.387778780781442500E-015, 1.000000000000000000, 2.775557561562891400E-016 ) ) ; +#4415 = ORIENTED_EDGE ( 'NONE', *, *, #1192, .F. ) ; +#4416 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000006800, 2.499999999999987100, 77.50000000000002800 ) ) ; +#4417 = ORIENTED_EDGE ( 'NONE', *, *, #1768, .F. ) ; +#4418 = ORIENTED_EDGE ( 'NONE', *, *, #2834, .T. ) ; +#4419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4420 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884037400E-016, 14.99134450328238800, 17.03893732453076700 ) ) ; +#4421 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#4422 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.301042606982605100E-016 ) ) ; +#4423 = ORIENTED_EDGE ( 'NONE', *, *, #1594, .F. ) ; +#4424 = ADVANCED_FACE ( 'NONE', ( #689 ), #4126, .T. ) ; +#4425 = VERTEX_POINT ( 'NONE', #1123 ) ; +#4426 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4427 = PLANE ( 'NONE', #2789 ) ; +#4428 = CIRCLE ( 'NONE', #2303, 1.200000000000006600 ) ; +#4429 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.749999999999972900, 77.50000000000002800 ) ) ; +#4430 = AXIS2_PLACEMENT_3D ( 'NONE', #3557, #3916, #1817 ) ; +#4431 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884034500E-016, 4.476834155604502800, 5.939305158707294500 ) ) ; +#4432 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, -10.50000000000000000, -1.994931997373327800E-015 ) ) ; +#4433 = CYLINDRICAL_SURFACE ( 'NONE', #2900, 3.189999999999998600 ) ; +#4434 = VECTOR ( 'NONE', #3055, 1000.000000000000000 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Front_Block.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Front_Block.step new file mode 100644 index 0000000..487edea --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Front_Block.step @@ -0,0 +1,2422 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Front_Block.STEP', + '2013-11-14T05:07:00', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = VECTOR ( 'NONE', #1709, 1000.000000000000000 ) ; +#2 = AXIS2_PLACEMENT_3D ( 'NONE', #2240, #807, #2088 ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 5.432951846361231900, 19.99999999999999600, 2.479434751198204400 ) ) ; +#4 = LINE ( 'NONE', #137, #1389 ) ; +#5 = LINE ( 'NONE', #1771, #1788 ) ; +#6 = AXIS2_PLACEMENT_3D ( 'NONE', #644, #1933, #819 ) ; +#7 = LINE ( 'NONE', #1212, #338 ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 19.99999999999999600, -11.25000000000000400 ) ) ; +#9 = VECTOR ( 'NONE', #998, 1000.000000000000000 ) ; +#10 = VECTOR ( 'NONE', #1907, 1000.000000000000000 ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000000, 3.750000000000048400 ) ) ; +#12 = VECTOR ( 'NONE', #2067, 1000.000000000000000 ) ; +#13 = VERTEX_POINT ( 'NONE', #440 ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( -5.605503433517307100, 23.48428576781864100, 5.035564256087666600 ) ) ; +#15 = VERTEX_POINT ( 'NONE', #1892 ) ; +#16 = VECTOR ( 'NONE', #769, 1000.000000000000000 ) ; +#17 = AXIS2_PLACEMENT_3D ( 'NONE', #1731, #632, #1926 ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 42.69174207655506600, -19.99999999999999600, 6.078108379756941700 ) ) ; +#19 = VERTEX_POINT ( 'NONE', #2190 ) ; +#20 = APPROVAL_DATE_TIME ( #474, #1386 ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( 12.93435844166615600, 20.00000000000000000, 3.200894610371034500 ) ) ; +#22 = CIRCLE ( 'NONE', #251, 5.000000000000004400 ) ; +#23 = VECTOR ( 'NONE', #493, 1000.000000000000000 ) ; +#24 = AXIS2_PLACEMENT_3D ( 'NONE', #1718, #977, #626 ) ; +#25 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#26 = LINE ( 'NONE', #2072, #937 ) ; +#27 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#28 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #1350, #298 ) ; +#29 = CIRCLE ( 'NONE', #739, 5.000000000000000900 ) ; +#30 = VECTOR ( 'NONE', #784, 1000.000000000000000 ) ; +#31 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#32 = LINE ( 'NONE', #620, #10 ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( 26.00000000000000400, 24.74903099319422100, 6.250000000000000000 ) ) ; +#34 = LINE ( 'NONE', #2229, #497 ) ; +#35 = ORIENTED_EDGE ( 'NONE', *, *, #777, .F. ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( -22.69174207655505500, -19.99999999999999600, 6.250000000000000000 ) ) ; +#37 = LINE ( 'NONE', #1504, #16 ) ; +#38 = AXIS2_PLACEMENT_3D ( 'NONE', #1713, #446, #280 ) ; +#39 = ORIENTED_EDGE ( 'NONE', *, *, #1442, .T. ) ; +#40 = CARTESIAN_POINT ( 'NONE', ( -5.533840779552839700, 21.66768294296559500, 3.749999999999998700 ) ) ; +#41 = AXIS2_PLACEMENT_3D ( 'NONE', #968, #1146, #110 ) ; +#42 = CIRCLE ( 'NONE', #283, 1.199999999999999700 ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( -20.84161575027607300, -20.00000000000000000, 3.868960951635446800 ) ) ; +#44 = CIRCLE ( 'NONE', #206, 3.750000000000000000 ) ; +#45 = DIRECTION ( 'NONE', ( -1.387778780781445700E-016, -1.000000000000000000, -1.561251128379126400E-016 ) ) ; +#46 = CYLINDRICAL_SURFACE ( 'NONE', #2119, 35.00000000000001400 ) ; +#47 = FACE_OUTER_BOUND ( 'NONE', #1066, .T. ) ; +#48 = AXIS2_PLACEMENT_3D ( 'NONE', #617, #1904, #789 ) ; +#49 = LINE ( 'NONE', #1520, #12 ) ; +#50 = AXIS2_PLACEMENT_3D ( 'NONE', #597, #1128, #1888 ) ; +#51 = LINE ( 'NONE', #1159, #56 ) ; +#52 = LINE ( 'NONE', #972, #30 ) ; +#53 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#54 = CIRCLE ( 'NONE', #412, 35.00000000000001400 ) ; +#55 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 9.094669181828613900E-032 ) ) ; +#56 = VECTOR ( 'NONE', #792, 1000.000000000000000 ) ; +#57 = VERTEX_POINT ( 'NONE', #273 ) ; +#58 = EDGE_LOOP ( 'NONE', ( #2096, #947 ) ) ; +#59 = AXIS2_PLACEMENT_3D ( 'NONE', #418, #591, #1498 ) ; +#60 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#61 = FACE_BOUND ( 'NONE', #139, .T. ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.49999999999999600, 29.96320343559642300 ) ) ; +#63 = VERTEX_POINT ( 'NONE', #1697 ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000000, 3.750000000000048400 ) ) ; +#65 = AXIS2_PLACEMENT_3D ( 'NONE', #1049, #677, #254 ) ; +#66 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#67 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.349229370204183400E-016, 9.540486298584918500E-032 ) ) ; +#68 = AXIS2_PLACEMENT_3D ( 'NONE', #1322, #270, #1516 ) ; +#69 = APPROVAL_PERSON_ORGANIZATION ( #527, #1386, #787 ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001400, -19.99999999999999600, 3.750000000000000400 ) ) ; +#71 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#72 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73 = CIRCLE ( 'NONE', #1958, 5.000000000000000000 ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( -5.555555555555554500, 23.85322457671660600, 3.750000000000000900 ) ) ; +#75 = FACE_OUTER_BOUND ( 'NONE', #1642, .T. ) ; +#76 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #616, #117, #1339 ), + ( #290, #1534, #453 ), + ( #1717, #624, #1911 ), + ( #796, #2080, #984 ), + ( #2238, #1162, #125 ), + ( #1349, #296, #1545 ), + ( #460, #1729, #631 ), + ( #1923, #806, #2086 ), + ( #994, #2245, #1172 ), + ( #134, #1358, #304 ), + ( #1553, #472, #1740 ), + ( #641, #1932, #817 ), + ( #2093, #1003, #2254 ), + ( #1183, #140, #1363 ), + ( #313, #1563, #479 ), + ( #1751, #650, #1942 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.01220279259135011900, 0.01293570932510236700, 0.01366862605885461500, 0.01440154279260686200, 0.01513445952635911000, 0.01586737626011135900, 0.01660029299386360500, 0.01806612646136810200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8498365855987981600, 1.000000000000000000), + ( 1.000000000000000000, 0.8498317104077561800, 1.000000000000000000), + ( 1.000000000000000000, 0.8489568960994484700, 1.000000000000000000), + ( 1.000000000000000000, 0.8454954625232979900, 1.000000000000000000), + ( 1.000000000000000000, 0.8428661190298827300, 1.000000000000000000), + ( 1.000000000000000000, 0.8360700386707438100, 1.000000000000000000), + ( 1.000000000000000000, 0.8318796577027757200, 1.000000000000000000), + ( 1.000000000000000000, 0.8218961539109985700, 1.000000000000000000), + ( 1.000000000000000000, 0.8162380819437247100, 1.000000000000000000), + ( 1.000000000000000000, 0.8035293939049235100, 1.000000000000000000), + ( 1.000000000000000000, 0.7964199641639996300, 1.000000000000000000), + ( 1.000000000000000000, 0.7811811573563101100, 1.000000000000000000), + ( 1.000000000000000000, 0.7730055204206824900, 1.000000000000000000), + ( 1.000000000000000000, 0.7465788207841789200, 1.000000000000000000), + ( 1.000000000000000000, 0.7269873895001289800, 1.000000000000000000), + ( 1.000000000000000000, 0.7055703913634847600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#77 = ORIENTED_EDGE ( 'NONE', *, *, #790, .F. ) ; +#78 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584918500E-032 ) ) ; +#79 = ORIENTED_EDGE ( 'NONE', *, *, #1609, .F. ) ; +#80 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -15.00000000000000000, -3.750000000000001800 ) ) ; +#81 = VECTOR ( 'NONE', #753, 1000.000000000000000 ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 19.99999999999999600, -6.250000000000001800 ) ) ; +#83 = VERTEX_POINT ( 'NONE', #2221 ) ; +#84 = AXIS2_PLACEMENT_3D ( 'NONE', #1120, #85, #1302 ) ; +#85 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#86 = ORIENTED_EDGE ( 'NONE', *, *, #917, .T. ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( -5.570280836507267400, 23.74375248555534400, 5.557620643987070800 ) ) ; +#88 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -11.25000000000000500 ) ) ; +#89 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999997300, -7.499999999999995600, 3.750000000000000400 ) ) ; +#90 = ORIENTED_EDGE ( 'NONE', *, *, #893, .F. ) ; +#91 = FACE_OUTER_BOUND ( 'NONE', #1875, .T. ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -9.999999999999998200, -8.700000000000002800 ) ) ; +#93 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#94 = LINE ( 'NONE', #1701, #158 ) ; +#95 = AXIS2_PLACEMENT_3D ( 'NONE', #1574, #1586, #500 ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000320600, 23.34592140010571600, 4.484559976117694200 ) ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 8.750000000000000000 ) ) ; +#98 = AXIS2_PLACEMENT_3D ( 'NONE', #837, #1761, #491 ) ; +#99 = CIRCLE ( 'NONE', #318, 5.000000000000000900 ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999996400, 30.00000000000000000, 1.250000000000001100 ) ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( -5.555555557259586100, 23.85322457587116700, 6.072467714211647700 ) ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 8.750000000000000000 ) ) ; +#103 = CYLINDRICAL_SURFACE ( 'NONE', #1694, 1.000000000000000900 ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 22.66440464423981300, 3.152554278443421500 ) ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -9.999999999999998200, -6.300000000000002500 ) ) ; +#106 = LINE ( 'NONE', #1216, #1963 ) ; +#107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.541976423090495400E-016 ) ) ; +#108 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, -9.999999999999998200, -8.700000000000002800 ) ) ; +#110 = DIRECTION ( 'NONE', ( -2.312964634635743000E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#111 = ORIENTED_EDGE ( 'NONE', *, *, #1789, .T. ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, -4.999999999999998200, -11.25000000000000000 ) ) ; +#113 = EDGE_LOOP ( 'NONE', ( #942, #1915 ) ) ; +#114 = CARTESIAN_POINT ( 'NONE', ( 25.76888171083461300, 21.22837094064438200, 3.750000000000000900 ) ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000200, 6.250000000000000000 ) ) ; +#116 = ORIENTED_EDGE ( 'NONE', *, *, #907, .T. ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 24.12885732024818400, 6.250000000000000000 ) ) ; +#118 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #1392, #339 ) ; +#119 = ORIENTED_EDGE ( 'NONE', *, *, #1543, .F. ) ; +#120 = ORIENTED_EDGE ( 'NONE', *, *, #1073, .F. ) ; +#121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999600, 23.32028320733475400, 3.750000000000000400 ) ) ; +#123 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .F. ) ; +#124 = CIRCLE ( 'NONE', #448, 5.000000000000005300 ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( 25.57917650455237500, 23.67780986998313600, 5.389370785867122000 ) ) ; +#126 = ORIENTED_EDGE ( 'NONE', *, *, #1760, .T. ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999998200, -7.499999999999996400, 3.750000000000000400 ) ) ; +#128 = AXIS2_PLACEMENT_3D ( 'NONE', #2113, #1024, #2268 ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -14.99999999999998600, 42.34772228646443900 ) ) ; +#130 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999994700, -9.999999999999998200, -11.25000000000000000 ) ) ; +#131 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999996400, 30.00000000000000000, 1.250000000000001100 ) ) ; +#132 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#133 = AXIS2_PLACEMENT_3D ( 'NONE', #483, #1014, #2263 ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 23.30313388511213200, 3.526751595573990100 ) ) ; +#135 = LINE ( 'NONE', #649, #1990 ) ; +#136 = CYLINDRICAL_SURFACE ( 'NONE', #50, 1.200000000000000600 ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, -7.499999999999995600, 2.500000000000000400 ) ) ; +#138 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, -1.541976423090495400E-016 ) ) ; +#139 = EDGE_LOOP ( 'NONE', ( #1908, #622 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 21.53743744007550000, 3.694547136201870700 ) ) ; +#141 = FACE_OUTER_BOUND ( 'NONE', #196, .T. ) ; +#142 = VERTEX_POINT ( 'NONE', #1315 ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -9.999999999999996400, -6.249999999999999100 ) ) ; +#144 = AXIS2_PLACEMENT_3D ( 'NONE', #2098, #146, #1368 ) ; +#145 = ORIENTED_EDGE ( 'NONE', *, *, #1210, .F. ) ; +#146 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -9.999999999999998200, -7.500000000000003600 ) ) ; +#148 = ORIENTED_EDGE ( 'NONE', *, *, #1455, .T. ) ; +#149 = AXIS2_PLACEMENT_3D ( 'NONE', #1947, #828, #2107 ) ; +#150 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.99999999999999800, 3.749999999999997800 ) ) ; +#151 = VERTEX_POINT ( 'NONE', #70 ) ; +#152 = LINE ( 'NONE', #801, #9 ) ; +#153 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#154 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -19.99999999999999600, 3.750000000000000400 ) ) ; +#156 = CARTESIAN_POINT ( 'NONE', ( 25.78517388670487500, 22.21119653839144100, 4.021653865393894000 ) ) ; +#157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#158 = VECTOR ( 'NONE', #1897, 1000.000000000000000 ) ; +#159 = AXIS2_PLACEMENT_3D ( 'NONE', #1736, #2090, #1177 ) ; +#160 = VECTOR ( 'NONE', #1456, 1000.000000000000000 ) ; +#161 = PLANE ( 'NONE', #95 ) ; +#162 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#163 = LINE ( 'NONE', #1476, #1685 ) ; +#164 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.156482317317871500E-016, -9.094669181828613900E-032 ) ) ; +#165 = AXIS2_PLACEMENT_3D ( 'NONE', #1008, #2256, #1188 ) ; +#166 = LINE ( 'NONE', #853, #1028 ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 8.750000000000000000 ) ) ; +#168 = ORIENTED_EDGE ( 'NONE', *, *, #1085, .F. ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -14.99999999999999800, 3.749999999999997800 ) ) ; +#170 = ORIENTED_EDGE ( 'NONE', *, *, #1255, .F. ) ; +#171 = ORIENTED_EDGE ( 'NONE', *, *, #1236, .F. ) ; +#172 = AXIS2_PLACEMENT_3D ( 'NONE', #1916, #2242, #1167 ) ; +#173 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .T. ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( 3.885427223149637800, 19.99999999999999600, 1.580590264762110000 ) ) ; +#175 = PLANE ( 'NONE', #1824 ) ; +#176 = ORIENTED_EDGE ( 'NONE', *, *, #1296, .F. ) ; +#177 = VERTEX_POINT ( 'NONE', #2024 ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, 24.99999999999999300, -7.500000000000003600 ) ) ; +#179 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .F. ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 25.58122001802785700, 23.66269912261455500, 5.354810571017273100 ) ) ; +#181 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Front_Block', ( #868, #1612 ), #1733 ) ; +#182 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 41.15939391210397200, -19.99999999999999300, 3.986361800728936100 ) ) ; +#184 = DATE_AND_TIME ( #630, #1097 ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( -5.654539946322125300, 23.12863927876159700, 4.613110325614827400 ) ) ; +#186 = LINE ( 'NONE', #1181, #1659 ) ; +#187 = LINE ( 'NONE', #1342, #1936 ) ; +#188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#189 = ORIENTED_EDGE ( 'NONE', *, *, #1109, .T. ) ; +#190 = VERTEX_POINT ( 'NONE', #2057 ) ; +#191 = VERTEX_POINT ( 'NONE', #1139 ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 12.07319959664360600, 20.00000000000000000, 3.473909267772364200 ) ) ; +#193 = VECTOR ( 'NONE', #1110, 1000.000000000000000 ) ; +#194 = ORIENTED_EDGE ( 'NONE', *, *, #1081, .F. ) ; +#195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#196 = EDGE_LOOP ( 'NONE', ( #1092, #194, #340, #284, #1180 ) ) ; +#197 = AXIS2_PLACEMENT_3D ( 'NONE', #457, #1723, #627 ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 30.00000000000001400, 42.34772228646442500 ) ) ; +#199 = ORIENTED_EDGE ( 'NONE', *, *, #1665, .T. ) ; +#200 = FACE_OUTER_BOUND ( 'NONE', #1628, .T. ) ; +#201 = ORIENTED_EDGE ( 'NONE', *, *, #1255, .T. ) ; +#202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#203 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#204 = LINE ( 'NONE', #607, #1023 ) ; +#205 = FACE_OUTER_BOUND ( 'NONE', #706, .T. ) ; +#206 = AXIS2_PLACEMENT_3D ( 'NONE', #2236, #1158, #121 ) ; +#207 = CARTESIAN_POINT ( 'NONE', ( -22.67302545345148300, -19.99999999999999600, 5.909991378863456800 ) ) ; +#208 = LINE ( 'NONE', #1589, #2007 ) ; +#209 = CIRCLE ( 'NONE', #211, 4.999999999999998200 ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( -5.163173453984644100, 22.59200186731914100, 3.750000000000000900 ) ) ; +#211 = AXIS2_PLACEMENT_3D ( 'NONE', #2051, #960, #2216 ) ; +#212 = ORIENTED_EDGE ( 'NONE', *, *, #1156, .F. ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( -20.34056997682939300, -20.00000000000000000, 3.764867738825641300 ) ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #1413, .F. ) ; +#215 = EDGE_LOOP ( 'NONE', ( #914, #1799, #1711, #1524, #1859, #301, #1288, #892, #278, #584, #2062, #1487, #2015 ) ) ; +#216 = CIRCLE ( 'NONE', #728, 1.199999999999999700 ) ; +#217 = CYLINDRICAL_SURFACE ( 'NONE', #159, 5.000000000000000900 ) ; +#218 = ORIENTED_EDGE ( 'NONE', *, *, #1328, .F. ) ; +#219 = AXIS2_PLACEMENT_3D ( 'NONE', #260, #1505, #425 ) ; +#220 = ORIENTED_EDGE ( 'NONE', *, *, #1655, .F. ) ; +#221 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.156482317317871500E-016, -9.094669181828613900E-032 ) ) ; +#222 = AXIS2_PLACEMENT_3D ( 'NONE', #1877, #253, #761 ) ; +#223 = ORIENTED_EDGE ( 'NONE', *, *, #1573, .F. ) ; +#224 = CIRCLE ( 'NONE', #428, 35.00000000000001400 ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -11.25000000000000000 ) ) ; +#226 = EDGE_LOOP ( 'NONE', ( #373, #390, #395, #423 ) ) ; +#227 = AXIS2_PLACEMENT_3D ( 'NONE', #243, #1488, #408 ) ; +#228 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#229 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.156482317317871500E-016, -9.094669181828613900E-032 ) ) ; +#230 = PERSON_AND_ORGANIZATION ( #1187, #2231 ) ; +#231 = VECTOR ( 'NONE', #1920, 1000.000000000000000 ) ; +#232 = CYLINDRICAL_SURFACE ( 'NONE', #65, 5.000000000000000900 ) ; +#233 = AXIS2_PLACEMENT_3D ( 'NONE', #2029, #931, #2196 ) ; +#234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 6.938893903907228400E-016 ) ) ; +#235 = EDGE_LOOP ( 'NONE', ( #1086, #1465, #2239, #1996 ) ) ; +#236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.638349949533651400E-016 ) ) ; +#237 = AXIS2_PLACEMENT_3D ( 'NONE', #403, #1670, #575 ) ; +#238 = VERTEX_POINT ( 'NONE', #601 ) ; +#239 = ORIENTED_EDGE ( 'NONE', *, *, #1252, .T. ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 3.750000000000000400 ) ) ; +#241 = ORIENTED_EDGE ( 'NONE', *, *, #1413, .T. ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000000, 3.750000000000048400 ) ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 25.00000000000000000, -6.249999999999998200 ) ) ; +#244 = ORIENTED_EDGE ( 'NONE', *, *, #893, .T. ) ; +#245 = ORIENTED_EDGE ( 'NONE', *, *, #1919, .T. ) ; +#246 = AXIS2_PLACEMENT_3D ( 'NONE', #1845, #1663, #568 ) ; +#247 = CIRCLE ( 'NONE', #481, 7.500000000000000000 ) ; +#248 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -9.999999999999998200, -7.500000000000003600 ) ) ; +#249 = EDGE_LOOP ( 'NONE', ( #1790, #245, #554, #1770 ) ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, 22.50000000000000000, 1.250000000000001100 ) ) ; +#251 = AXIS2_PLACEMENT_3D ( 'NONE', #1102, #67, #1286 ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 25.00000000000000000, -6.249999999999998200 ) ) ; +#253 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#254 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.60601730895097100, 5.280668901631779400 ) ) ; +#256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#257 = FACE_BOUND ( 'NONE', #695, .T. ) ; +#258 = FACE_OUTER_BOUND ( 'NONE', #1440, .T. ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -6.300000000000002500 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -9.999999999999998200, -7.500000000000003600 ) ) ; +#261 = CIRCLE ( 'NONE', #2262, 1.199999999999999700 ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( -5.667591542746598600, 23.03493352963109300, 4.527996898944678600 ) ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 19.99999999999999600, -6.250000000000001800 ) ) ; +#264 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#265 = ORIENTED_EDGE ( 'NONE', *, *, #1954, .F. ) ; +#266 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.349229370204183400E-016, 9.540486298584918500E-032 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.74903098879123700, 6.001454799932389500 ) ) ; +#268 = ORIENTED_EDGE ( 'NONE', *, *, #851, .T. ) ; +#269 = AXIS2_PLACEMENT_3D ( 'NONE', #726, #1271, #1836 ) ; +#270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#271 = ORIENTED_EDGE ( 'NONE', *, *, #1472, .F. ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000001800, 22.13121820900675000, 3.817742252893217000 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 14.34383502355557200, 8.750000000000000000 ) ) ; +#274 = VERTEX_POINT ( 'NONE', #2047 ) ; +#275 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#276 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#277 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 2.500000000000000400 ) ) ; +#278 = ORIENTED_EDGE ( 'NONE', *, *, #1624, .T. ) ; +#279 = FACE_OUTER_BOUND ( 'NONE', #1594, .T. ) ; +#280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.734723475976806800E-016 ) ) ; +#281 = EDGE_LOOP ( 'NONE', ( #223, #1113, #1407, #1353 ) ) ; +#282 = CYLINDRICAL_SURFACE ( 'NONE', #707, 5.000000000000000000 ) ; +#283 = AXIS2_PLACEMENT_3D ( 'NONE', #731, #2018, #918 ) ; +#284 = ORIENTED_EDGE ( 'NONE', *, *, #1041, .F. ) ; +#285 = DIRECTION ( 'NONE', ( -6.426167477732052700E-032, 2.308220447633426100E-016, 1.000000000000000000 ) ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( 25.24778664831449500, 22.35578870016605200, 3.750000000000000400 ) ) ; +#287 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000001800, 42.34772228646442500 ) ) ; +#289 = AXIS2_PLACEMENT_3D ( 'NONE', #718, #385, #1646 ) ; +#290 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.74903098879296700, 6.001454799932588500 ) ) ; +#291 = PERSON_AND_ORGANIZATION ( #1187, #2231 ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( -6.000000000000067500, 20.78869031963125000, 3.750000000000000400 ) ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#294 = VECTOR ( 'NONE', #982, 1000.000000000000000 ) ; +#295 = PLANE ( 'NONE', #1997 ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 23.73465942435696300, 4.940789280047979100 ) ) ; +#297 = VECTOR ( 'NONE', #1869, 1000.000000000000000 ) ; +#298 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#299 = AXIS2_PLACEMENT_3D ( 'NONE', #548, #1821, #1831 ) ; +#300 = ORIENTED_EDGE ( 'NONE', *, *, #889, .T. ) ; +#301 = ORIENTED_EDGE ( 'NONE', *, *, #1660, .T. ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -4.999999999999998200, -3.750000000000000400 ) ) ; +#303 = ORIENTED_EDGE ( 'NONE', *, *, #1193, .F. ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( 25.70876178143611700, 22.74268732516686600, 4.304822568508280200 ) ) ; +#305 = AXIS2_PLACEMENT_3D ( 'NONE', #1072, #1809, #1246 ) ; +#306 = ORIENTED_EDGE ( 'NONE', *, *, #1854, .T. ) ; +#307 = ORIENTED_EDGE ( 'NONE', *, *, #1833, .T. ) ; +#308 = PLANE ( 'NONE', #144 ) ; +#309 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#310 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, -1.000000000000000000, -1.541976423090495400E-016 ) ) ; +#311 = VERTEX_POINT ( 'NONE', #105 ) ; +#312 = CYLINDRICAL_SURFACE ( 'NONE', #466, 4.999999999999997300 ) ; +#313 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 21.24603006199916800, 2.746358506781577000 ) ) ; +#314 = ORIENTED_EDGE ( 'NONE', *, *, #880, .T. ) ; +#315 = AXIS2_PLACEMENT_3D ( 'NONE', #2003, #897, #2163 ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999600, 8.750000000000000000 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999997300, -7.499999999999995600, 8.751025000000000300 ) ) ; +#318 = AXIS2_PLACEMENT_3D ( 'NONE', #1279, #229, #1471 ) ; +#319 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#320 = VECTOR ( 'NONE', #319, 1000.000000000000000 ) ; +#321 = CYLINDRICAL_SURFACE ( 'NONE', #1841, 1.200000000000000600 ) ; +#322 = LINE ( 'NONE', #1742, #1201 ) ; +#323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, -6.250000000000003600 ) ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( 25.71515845201993900, 22.69765243047886500, 4.275490402108233400 ) ) ; +#326 = VERTEX_POINT ( 'NONE', #1737 ) ; +#327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#328 = AXIS2_PLACEMENT_3D ( 'NONE', #198, #539, #1815 ) ; +#329 = VERTEX_POINT ( 'NONE', #1511 ) ; +#330 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#331 = ORIENTED_EDGE ( 'NONE', *, *, #1210, .T. ) ; +#332 = AXIS2_PLACEMENT_3D ( 'NONE', #33, #1254, #203 ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, 24.99999999999999300, -8.700000000000002800 ) ) ; +#334 = VECTOR ( 'NONE', #596, 1000.000000000000000 ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -14.99999999999999600, -6.249999999999984900 ) ) ; +#336 = EDGE_LOOP ( 'NONE', ( #878, #459, #679, #1229 ) ) ; +#337 = VECTOR ( 'NONE', #1540, 1000.000000000000000 ) ; +#338 = VECTOR ( 'NONE', #162, 1000.000000000000000 ) ; +#339 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#340 = ORIENTED_EDGE ( 'NONE', *, *, #1937, .F. ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000200, 1.250000000000002700 ) ) ; +#342 = ORIENTED_EDGE ( 'NONE', *, *, #1304, .T. ) ; +#343 = DIRECTION ( 'NONE', ( 1.349229370204183400E-016, 1.000000000000000000, 1.541976423090495400E-016 ) ) ; +#344 = AXIS2_PLACEMENT_3D ( 'NONE', #1435, #370, #1630 ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.74903099319422100, 6.250000000000000000 ) ) ; +#346 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#347 = AXIS2_PLACEMENT_3D ( 'NONE', #2146, #1424, #368 ) ; +#348 = VECTOR ( 'NONE', #974, 1000.000000000000000 ) ; +#349 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#350 = CIRCLE ( 'NONE', #84, 7.500000000000001800 ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 25.55884052658209200, 23.82870468659144700, 5.882490956734238300 ) ) ; +#352 = CARTESIAN_POINT ( 'NONE', ( -5.555555555555553600, 23.85322457671660600, 8.750000000000000000 ) ) ; +#353 = ORIENTED_EDGE ( 'NONE', *, *, #794, .F. ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 41.60245034016500700, -19.99999999999999600, 4.232266056208080100 ) ) ; +#355 = ORIENTED_EDGE ( 'NONE', *, *, #851, .F. ) ; +#356 = VERTEX_POINT ( 'NONE', #1131 ) ; +#357 = AXIS2_PLACEMENT_3D ( 'NONE', #2154, #1064, #27 ) ; +#358 = CARTESIAN_POINT ( 'NONE', ( -5.715158452019940300, 22.69765243047885400, 4.275490402108218300 ) ) ; +#359 = ORIENTED_EDGE ( 'NONE', *, *, #864, .F. ) ; +#360 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #713, #374, #40, #1260, #210, #1450, #378, #1639 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( -1.203270561827878000E-005, 0.001477592361567713900, 0.002222404895160705800, 0.002967217428753698200 ), + .UNSPECIFIED. ) ; +#361 = AXIS2_PLACEMENT_3D ( 'NONE', #1571, #1757, #659 ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( 16.11482801229071200, 20.00000000000000700, 1.580421442386868300 ) ) ; +#363 = ORIENTED_EDGE ( 'NONE', *, *, #1562, .F. ) ; +#364 = ORIENTED_EDGE ( 'NONE', *, *, #843, .T. ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 3.750000000000000900 ) ) ; +#366 = CIRCLE ( 'NONE', #471, 32.50000000000001400 ) ; +#367 = VERTEX_POINT ( 'NONE', #2212 ) ; +#368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 10.60482178215759000, 20.00000000000000000, 3.750000000000054200 ) ) ; +#370 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#371 = VECTOR ( 'NONE', #2135, 1000.000000000000000 ) ; +#372 = VECTOR ( 'NONE', #987, 1000.000000000000000 ) ; +#373 = ORIENTED_EDGE ( 'NONE', *, *, #979, .F. ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( -5.768966528005885900, 21.22820958404906500, 3.749999999999924900 ) ) ; +#375 = ORIENTED_EDGE ( 'NONE', *, *, #1848, .F. ) ; +#376 = VERTEX_POINT ( 'NONE', #431 ) ; +#377 = CARTESIAN_POINT ( 'NONE', ( -22.54456844397059700, -19.99999999999999600, 5.415466286987147300 ) ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 23.32028283278432200, 3.750000000000002200 ) ) ; +#379 = ORIENTED_EDGE ( 'NONE', *, *, #1277, .T. ) ; +#380 = ORIENTED_EDGE ( 'NONE', *, *, #762, .T. ) ; +#381 = CYLINDRICAL_SURFACE ( 'NONE', #694, 1.200000000000000600 ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( -20.00000000000001400, -19.99999999999999600, 3.750000000000000400 ) ) ; +#383 = ORIENTED_EDGE ( 'NONE', *, *, #1690, .F. ) ; +#384 = FACE_OUTER_BOUND ( 'NONE', #1262, .T. ) ; +#385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#386 = SHAPE_DEFINITION_REPRESENTATION ( #697, #181 ) ; +#387 = AXIS2_PLACEMENT_3D ( 'NONE', #277, #1526, #445 ) ; +#388 = CIRCLE ( 'NONE', #2055, 1.200000000000000600 ) ; +#389 = VECTOR ( 'NONE', #182, 1000.000000000000000 ) ; +#390 = ORIENTED_EDGE ( 'NONE', *, *, #1109, .F. ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 8.750000000000000000 ) ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#393 = ORIENTED_EDGE ( 'NONE', *, *, #1518, .F. ) ; +#394 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#395 = ORIENTED_EDGE ( 'NONE', *, *, #1221, .F. ) ; +#396 = ORIENTED_EDGE ( 'NONE', *, *, #876, .F. ) ; +#397 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1044, #1978, #1227, #183, #1411, #354, #1610, #522, #1797, #691, #1986, #873, #2142, #1051, #18, #1233 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001014695419246190600, 0.001522043128869275500, 0.002029390838492360900, 0.002536738548115445600, 0.003044086257738530300, 0.003551433967361615800, 0.004058781676984700100 ), + .UNSPECIFIED. ) ; +#398 = VERTEX_POINT ( 'NONE', #302 ) ; +#399 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#400 = AXIS2_PLACEMENT_3D ( 'NONE', #1319, #266, #1515 ) ; +#401 = VERTEX_POINT ( 'NONE', #263 ) ; +#402 = LINE ( 'NONE', #74, #193 ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 12.50000000000000200, 8.750000000000000000 ) ) ; +#404 = ORIENTED_EDGE ( 'NONE', *, *, #798, .T. ) ; +#405 = AXIS2_PLACEMENT_3D ( 'NONE', #80, #950, #2207 ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 3.750000000000000900 ) ) ; +#407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 6.938893903907228400E-016 ) ) ; +#408 = DIRECTION ( 'NONE', ( -1.734723475976805600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#409 = LINE ( 'NONE', #2011, #1893 ) ; +#410 = LINE ( 'NONE', #839, #1300 ) ; +#411 = FACE_OUTER_BOUND ( 'NONE', #1940, .T. ) ; +#412 = AXIS2_PLACEMENT_3D ( 'NONE', #424, #1691, #595 ) ; +#413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#414 = CARTESIAN_POINT ( 'NONE', ( 25.55555555555555400, 23.85322457671660600, 8.750000000000000000 ) ) ; +#415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#416 = EDGE_LOOP ( 'NONE', ( #1555, #921, #1230, #1466 ) ) ; +#417 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, 24.99999999999999300, -7.500000000000003600 ) ) ; +#419 = VERTEX_POINT ( 'NONE', #1549 ) ; +#420 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999893400, 23.92672803703760900, 5.286336494816315400 ) ) ; +#421 = VERTEX_POINT ( 'NONE', #469 ) ; +#422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#423 = ORIENTED_EDGE ( 'NONE', *, *, #1539, .F. ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 6.250000000000000000 ) ) ; +#425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#426 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 25.00000000000000000, -11.25000000000000400 ) ) ; +#427 = ORIENTED_EDGE ( 'NONE', *, *, #1095, .T. ) ; +#428 = AXIS2_PLACEMENT_3D ( 'NONE', #1876, #760, #2044 ) ; +#429 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 23.68252286915976500, 3.839195658859626500 ) ) ; +#430 = TOROIDAL_SURFACE ( 'NONE', #455, 32.50000000000001400, 2.500000000000000000 ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -14.99999999999999600, -3.749999999999989300 ) ) ; +#432 = PLANE ( 'NONE', #2077 ) ; +#433 = VERTEX_POINT ( 'NONE', #1168 ) ; +#434 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#435 = VECTOR ( 'NONE', #2210, 1000.000000000000000 ) ; +#436 = AXIS2_PLACEMENT_3D ( 'NONE', #581, #752, #2036 ) ; +#437 = ORIENTED_EDGE ( 'NONE', *, *, #755, .T. ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 4.999999999999997300, 29.96320343559642300 ) ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( -5.885860902233177100, 21.52921016782086000, 3.800472804292975400 ) ) ; +#440 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999999999999600, -11.25000000000000500 ) ) ; +#441 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.349229370204183400E-016, 9.540486298584918500E-032 ) ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 30.00000000000001400, 42.34772228646442500 ) ) ; +#443 = FACE_OUTER_BOUND ( 'NONE', #2001, .T. ) ; +#444 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#445 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#446 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#447 = CIRCLE ( 'NONE', #2145, 1.199999999999999700 ) ; +#448 = AXIS2_PLACEMENT_3D ( 'NONE', #252, #1496, #415 ) ; +#449 = CONICAL_SURFACE ( 'NONE', #133, 7.500000000000000000, 0.7853981633974431700 ) ; +#450 = CARTESIAN_POINT ( 'NONE', ( 25.03949047855607900, 23.07507985941046900, 3.750000000000001300 ) ) ; +#451 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#452 = ORIENTED_EDGE ( 'NONE', *, *, #1794, .F. ) ; +#453 = CARTESIAN_POINT ( 'NONE', ( 25.55555555725984700, 23.85322457587104200, 6.072467714211641400 ) ) ; +#454 = ORIENTED_EDGE ( 'NONE', *, *, #1221, .T. ) ; +#455 = AXIS2_PLACEMENT_3D ( 'NONE', #1477, #66, #2027 ) ; +#456 = ORIENTED_EDGE ( 'NONE', *, *, #1546, .T. ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000200, 1.250000000000002700 ) ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, -4.999999999999998200, -6.249999999999998200 ) ) ; +#459 = ORIENTED_EDGE ( 'NONE', *, *, #1722, .T. ) ; +#460 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.16733232262393100, 4.398684310916695300 ) ) ; +#461 = EDGE_LOOP ( 'NONE', ( #890, #583, #265, #1082 ) ) ; +#462 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2078, #122, #450, #1531, #286, #1335, #114, #1149 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0007450859696589973400, 0.001490171939317994700, 0.002980343878635989400 ), + .UNSPECIFIED. ) ; +#463 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 5.000000000000000900, 6.250000000000001800 ) ) ; +#464 = VERTEX_POINT ( 'NONE', #2243 ) ; +#465 = FACE_OUTER_BOUND ( 'NONE', #1143, .T. ) ; +#466 = AXIS2_PLACEMENT_3D ( 'NONE', #2021, #1468, #394 ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999995600, -9.999999999999998200, -11.25000000000000000 ) ) ; +#468 = VERTEX_POINT ( 'NONE', #1354 ) ; +#469 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, -7.499999999999996400, 8.750000000000000000 ) ) ; +#470 = PLANE ( 'NONE', #1975 ) ; +#471 = AXIS2_PLACEMENT_3D ( 'NONE', #574, #1861, #745 ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 22.68881179899412000, 4.030841989378001400 ) ) ; +#473 = PLANE ( 'NONE', #2251 ) ; +#474 = DATE_AND_TIME ( #932, #1422 ) ; +#475 = LINE ( 'NONE', #553, #160 ) ; +#476 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 10.43744331762962200, 6.250000000000000000 ) ) ; +#477 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -9.999999999999998200, -7.500000000000003600 ) ) ; +#478 = LINE ( 'NONE', #831, #23 ) ; +#479 = CARTESIAN_POINT ( 'NONE', ( 25.94391086372477800, 21.14714372654856000, 3.747398801306879100 ) ) ; +#480 = CIRCLE ( 'NONE', #17, 1.200000000000000600 ) ; +#481 = AXIS2_PLACEMENT_3D ( 'NONE', #242, #1486, #407 ) ; +#482 = ORIENTED_EDGE ( 'NONE', *, *, #1182, .F. ) ; +#483 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000000, 3.750000000000048400 ) ) ; +#484 = ORIENTED_EDGE ( 'NONE', *, *, #1749, .F. ) ; +#485 = AXIS2_PLACEMENT_3D ( 'NONE', #924, #2185, #1101 ) ; +#486 = DIRECTION ( 'NONE', ( 1.349229370204183400E-016, 1.000000000000000000, 1.541976423090495400E-016 ) ) ; +#487 = ORIENTED_EDGE ( 'NONE', *, *, #983, .T. ) ; +#488 = PLANE ( 'NONE', #361 ) ; +#489 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#490 = ORIENTED_EDGE ( 'NONE', *, *, #1914, .T. ) ; +#491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#492 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999999100, 24.61618763172856100, 5.315205255706553400 ) ) ; +#493 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#494 = ORIENTED_EDGE ( 'NONE', *, *, #1837, .T. ) ; +#495 = CIRCLE ( 'NONE', #511, 3.750000000000000000 ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 25.65453994632212400, 23.12863927876161400, 4.613110325614843400 ) ) ; +#497 = VECTOR ( 'NONE', #980, 1000.000000000000000 ) ; +#498 = TOROIDAL_SURFACE ( 'NONE', #499, 32.50000000000001400, 2.500000000000000000 ) ; +#499 = AXIS2_PLACEMENT_3D ( 'NONE', #1843, #2178, #1094 ) ; +#500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#501 = CIRCLE ( 'NONE', #227, 5.000000000000004400 ) ; +#502 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999998200, -7.499999999999996400, 8.750000000000000000 ) ) ; +#503 = AXIS2_PLACEMENT_3D ( 'NONE', #1150, #1223, #2117 ) ; +#504 = LINE ( 'NONE', #730, #543 ) ; +#505 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.99999999999999300, -7.500000000000003600 ) ) ; +#506 = VECTOR ( 'NONE', #1151, 1000.000000000000000 ) ; +#507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.517883041479702500E-016 ) ) ; +#508 = VECTOR ( 'NONE', #2121, 1000.000000000000000 ) ; +#509 = ORIENTED_EDGE ( 'NONE', *, *, #747, .F. ) ; +#510 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 3.750000000000000900 ) ) ; +#511 = AXIS2_PLACEMENT_3D ( 'NONE', #1662, #567, #1852 ) ; +#512 = ORIENTED_EDGE ( 'NONE', *, *, #1823, .F. ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -14.99999999999999800, 3.749999999999997800 ) ) ; +#514 = VERTEX_POINT ( 'NONE', #130 ) ; +#515 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#516 = ORIENTED_EDGE ( 'NONE', *, *, #1577, .F. ) ; +#517 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#518 = VERTEX_POINT ( 'NONE', #803 ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 25.55555555555555700, 23.85322457671660600, 6.250000000000000000 ) ) ; +#520 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .F. ) ; +#521 = CIRCLE ( 'NONE', #485, 7.500000000000001800 ) ; +#522 = CARTESIAN_POINT ( 'NONE', ( 41.99548211188404400, -20.00000000000000000, 4.561069281316952700 ) ) ; +#523 = VERTEX_POINT ( 'NONE', #2083 ) ; +#524 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #1337, #287 ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( -5.785173886704863700, 22.21119653839139800, 4.021653865393880700 ) ) ; +#526 = AXIS2_PLACEMENT_3D ( 'NONE', #785, #2069, #973 ) ; +#527 = PERSON_AND_ORGANIZATION ( #1187, #2231 ) ; +#528 = AXIS2_PLACEMENT_3D ( 'NONE', #1512, #775, #2058 ) ; +#529 = CYLINDRICAL_SURFACE ( 'NONE', #1928, 4.999999999999997300 ) ; +#530 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#531 = VECTOR ( 'NONE', #2063, 1000.000000000000000 ) ; +#532 = PLANE ( 'NONE', #328 ) ; +#533 = ORIENTED_EDGE ( 'NONE', *, *, #1546, .F. ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999996400, 30.00000000000000000, 1.250000000000001100 ) ) ; +#535 = ORIENTED_EDGE ( 'NONE', *, *, #996, .T. ) ; +#536 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#537 = VERTEX_POINT ( 'NONE', #1917 ) ; +#538 = AXIS2_PLACEMENT_3D ( 'NONE', #1522, #441, #1708 ) ; +#539 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 9.094669181828613900E-032 ) ) ; +#540 = EDGE_LOOP ( 'NONE', ( #940, #2226, #976, #1597, #2164, #86 ) ) ; +#541 = ORIENTED_EDGE ( 'NONE', *, *, #1592, .F. ) ; +#542 = ORIENTED_EDGE ( 'NONE', *, *, #967, .F. ) ; +#543 = VECTOR ( 'NONE', #2016, 1000.000000000000000 ) ; +#544 = FACE_OUTER_BOUND ( 'NONE', #1463, .T. ) ; +#545 = AXIS2_PLACEMENT_3D ( 'NONE', #1698, #604, #1894 ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( -22.31572996294413300, -19.99999999999999600, 4.961790448539066900 ) ) ; +#547 = FACE_OUTER_BOUND ( 'NONE', #1621, .T. ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999998200, -7.499999999999996400, 8.751025000000000300 ) ) ; +#549 = CIRCLE ( 'NONE', #1782, 5.000000000000000900 ) ; +#550 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #1317, #264 ) ; +#551 = LINE ( 'NONE', #8, #1396 ) ; +#552 = ORIENTED_EDGE ( 'NONE', *, *, #876, .T. ) ; +#553 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000000000, -6.249999999999998200 ) ) ; +#554 = ORIENTED_EDGE ( 'NONE', *, *, #1983, .F. ) ; +#555 = AXIS2_PLACEMENT_3D ( 'NONE', #1123, #1306, #256 ) ; +#556 = EDGE_LOOP ( 'NONE', ( #1012, #874, #427, #1443 ) ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999600, 8.750000000000000000 ) ) ; +#558 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#559 = ORIENTED_EDGE ( 'NONE', *, *, #1058, .F. ) ; +#560 = AXIS2_PLACEMENT_3D ( 'NONE', #1297, #1475, #2032 ) ; +#561 = ORIENTED_EDGE ( 'NONE', *, *, #1480, .T. ) ; +#562 = ORIENTED_EDGE ( 'NONE', *, *, #1686, .F. ) ; +#563 = FACE_BOUND ( 'NONE', #1105, .T. ) ; +#564 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#565 = VERTEX_POINT ( 'NONE', #458 ) ; +#566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#567 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#569 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#570 = PERSON_AND_ORGANIZATION ( #1187, #2231 ) ; +#571 = AXIS2_PLACEMENT_3D ( 'NONE', #1483, #1674, #1293 ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( 26.00000000000000400, 24.74903099319422100, 8.750000000000000000 ) ) ; +#573 = FACE_OUTER_BOUND ( 'NONE', #657, .T. ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 3.750000000000000400 ) ) ; +#575 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#576 = AXIS2_PLACEMENT_3D ( 'NONE', #62, #2026, #2020 ) ; +#577 = CIRCLE ( 'NONE', #68, 32.50000000000001400 ) ; +#578 = ORIENTED_EDGE ( 'NONE', *, *, #1379, .F. ) ; +#579 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#580 = ORIENTED_EDGE ( 'NONE', *, *, #1423, .F. ) ; +#581 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, -3.749999999999994700 ) ) ; +#582 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, -9.999999999999998200, -6.300000000000002500 ) ) ; +#583 = ORIENTED_EDGE ( 'NONE', *, *, #1883, .T. ) ; +#584 = ORIENTED_EDGE ( 'NONE', *, *, #1518, .T. ) ; +#585 = AXIS2_PLACEMENT_3D ( 'NONE', #767, #2048, #956 ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, 22.50000000000000000, 8.750000000000000000 ) ) ; +#587 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, 8.750000000000000000 ) ) ; +#588 = AXIS2_PLACEMENT_3D ( 'NONE', #248, #1492, #413 ) ; +#589 = EDGE_LOOP ( 'NONE', ( #218, #1653, #1116, #1437 ) ) ; +#590 = CIRCLE ( 'NONE', #524, 2.062556682370380900 ) ; +#591 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#592 = CARTESIAN_POINT ( 'NONE', ( -5.601996873813383200, 23.50997309779645800, 5.075610598720603900 ) ) ; +#593 = CARTESIAN_POINT ( 'NONE', ( -22.69174207655505500, -19.99999999999999600, 8.750000000000000000 ) ) ; +#594 = FACE_BOUND ( 'NONE', #58, .T. ) ; +#595 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#596 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, 24.99999999999999300, -7.500000000000003600 ) ) ; +#598 = FACE_OUTER_BOUND ( 'NONE', #416, .T. ) ; +#599 = FACE_OUTER_BOUND ( 'NONE', #556, .T. ) ; +#600 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999999100, 22.86738689204866800, 4.127749741613317100 ) ) ; +#601 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.99999999999999300, -6.300000000000002500 ) ) ; +#602 = LINE ( 'NONE', #1405, #969 ) ; +#603 = AXIS2_PLACEMENT_3D ( 'NONE', #2192, #1106, #71 ) ; +#604 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#605 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 25.00000000000000000, -6.249999999999998200 ) ) ; +#606 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 30.00000000000000000, 1.250000000000001100 ) ) ; +#608 = AXIS2_PLACEMENT_3D ( 'NONE', #572, #1858, #741 ) ; +#609 = PLANE ( 'NONE', #41 ) ; +#610 = VERTEX_POINT ( 'NONE', #1290 ) ; +#611 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 21.73619467988132900, 2.820661926243995100 ) ) ; +#612 = ORIENTED_EDGE ( 'NONE', *, *, #1480, .F. ) ; +#613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#614 = DATE_TIME_ROLE ( 'classification_date' ) ; +#615 = ORIENTED_EDGE ( 'NONE', *, *, #816, .F. ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.74903099319421800, 6.250000000000000000 ) ) ; +#617 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, 3.750000000000000000 ) ) ; +#618 = ORIENTED_EDGE ( 'NONE', *, *, #1506, .F. ) ; +#619 = AXIS2_PLACEMENT_3D ( 'NONE', #923, #2182, #1098 ) ; +#620 = CARTESIAN_POINT ( 'NONE', ( 1.224646799147353500E-015, 20.00000000000000400, 1.250000000000003800 ) ) ; +#621 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584918500E-032 ) ) ; +#622 = ORIENTED_EDGE ( 'NONE', *, *, #1344, .F. ) ; +#623 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #1657, #564 ) ; +#624 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000043000, 24.10298550741331500, 5.854904615843564900 ) ) ; +#625 = ORIENTED_EDGE ( 'NONE', *, *, #1467, .T. ) ; +#626 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.517883041479702500E-016 ) ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 2.499999999999988500, 1.250000000000000900 ) ) ; +#629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#630 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#631 = CARTESIAN_POINT ( 'NONE', ( 25.61600230604838300, 23.40748154192222700, 4.927631649699637100 ) ) ; +#632 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#633 = LINE ( 'NONE', #1169, #1551 ) ; +#634 = AXIS2_PLACEMENT_3D ( 'NONE', #2174, #1091, #53 ) ; +#635 = VECTOR ( 'NONE', #93, 1000.000000000000000 ) ; +#636 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#637 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999300, -6.300000000000002500 ) ) ; +#638 = AXIS2_PLACEMENT_3D ( 'NONE', #2156, #202, #1999 ) ; +#639 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1593, #1211, #1967, #855, #2127, #1034, #3, #1219, #174, #1400 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001787277774772685600, 0.003574555549545368900, 0.005361833324318051500, 0.007149111099090734400 ), + .UNSPECIFIED. ) ; +#640 = ORIENTED_EDGE ( 'NONE', *, *, #1749, .T. ) ; +#641 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 22.66440464424027100, 3.152554278443566300 ) ) ; +#642 = VERTEX_POINT ( 'NONE', #1542 ) ; +#643 = AXIS2_PLACEMENT_3D ( 'NONE', #1270, #221, #1460 ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999600, 3.750000000000000000 ) ) ; +#645 = ORIENTED_EDGE ( 'NONE', *, *, #1837, .F. ) ; +#646 = CIRCLE ( 'NONE', #526, 10.00000000000002500 ) ; +#647 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, 24.99999999999999300, -7.500000000000003600 ) ) ; +#648 = VERTEX_POINT ( 'NONE', #991 ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -15.00000000000000000, -6.249999999999998200 ) ) ; +#650 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 20.76096228047447700, 3.754456601096797500 ) ) ; +#651 = EDGE_LOOP ( 'NONE', ( #1062, #1693, #1968, #1209 ) ) ; +#652 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#653 = ORIENTED_EDGE ( 'NONE', *, *, #1862, .T. ) ; +#654 = FACE_OUTER_BOUND ( 'NONE', #215, .T. ) ; +#655 = AXIS2_PLACEMENT_3D ( 'NONE', #557, #1840, #729 ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, 8.750000000000000000 ) ) ; +#657 = EDGE_LOOP ( 'NONE', ( #842, #772, #809, #1600 ) ) ; +#658 = AXIS2_PLACEMENT_3D ( 'NONE', #1061, #1245, #195 ) ; +#659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#660 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 10.65616497644443300, 8.750000000000000000 ) ) ; +#661 = FACE_BOUND ( 'NONE', #1278, .T. ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 19.99999999999999600, -11.25000000000000400 ) ) ; +#663 = CONICAL_SURFACE ( 'NONE', #1871, 7.500000000000000000, 0.7853981633974431700 ) ; +#664 = LINE ( 'NONE', #1952, #2053 ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 3.750000000000000400 ) ) ; +#666 = AXIS2_PLACEMENT_3D ( 'NONE', #365, #1620, #530 ) ; +#667 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 24.74903099319423200, 6.010510315977977100 ) ) ; +#668 = ORIENTED_EDGE ( 'NONE', *, *, #1039, .T. ) ; +#669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#670 = AXIS2_PLACEMENT_3D ( 'NONE', #60, #569, #2115 ) ; +#671 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#672 = EDGE_LOOP ( 'NONE', ( #520, #894, #2064, #898 ) ) ; +#673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#674 = ORIENTED_EDGE ( 'NONE', *, *, #864, .T. ) ; +#675 = FACE_OUTER_BOUND ( 'NONE', #2123, .T. ) ; +#676 = EDGE_LOOP ( 'NONE', ( #171, #303, #331, #355 ) ) ; +#677 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#678 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#679 = ORIENTED_EDGE ( 'NONE', *, *, #1766, .T. ) ; +#680 = EDGE_LOOP ( 'NONE', ( #454, #482, #509, #612 ) ) ; +#681 = AXIS2_PLACEMENT_3D ( 'NONE', #1568, #2122, #1195 ) ; +#682 = FACE_OUTER_BOUND ( 'NONE', #1880, .T. ) ; +#683 = ORIENTED_EDGE ( 'NONE', *, *, #1643, .F. ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.61618763172856500, 5.315205255706554300 ) ) ; +#685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 6.938893903907107100E-016, -1.000000000000000000 ) ) ; +#686 = AXIS2_PLACEMENT_3D ( 'NONE', #1387, #330, #766 ) ; +#687 = DATE_AND_TIME ( #1161, #1656 ) ; +#688 = CARTESIAN_POINT ( 'NONE', ( -5.555555555555557100, 23.85322457671660600, 6.063912805277815300 ) ) ; +#689 = LINE ( 'NONE', #2085, #1611 ) ; +#690 = CARTESIAN_POINT ( 'NONE', ( 13.75000000000000200, -7.499999999999996400, 2.500000000000000400 ) ) ; +#691 = CARTESIAN_POINT ( 'NONE', ( 42.31231148580451400, -20.00000000000000400, 4.956686481665928000 ) ) ; +#692 = VECTOR ( 'NONE', #1879, 1000.000000000000000 ) ; +#693 = ORIENTED_EDGE ( 'NONE', *, *, #1937, .T. ) ; +#694 = AXIS2_PLACEMENT_3D ( 'NONE', #647, #1178, #1938 ) ; +#695 = EDGE_LOOP ( 'NONE', ( #1856, #2037 ) ) ; +#696 = CARTESIAN_POINT ( 'NONE', ( -5.887980758691790900, 21.51537530752659000, 3.799409044492043200 ) ) ; +#697 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #1581 ) ; +#698 = ORIENTED_EDGE ( 'NONE', *, *, #1240, .F. ) ; +#699 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999300, -8.700000000000002800 ) ) ; +#700 = FACE_BOUND ( 'NONE', #113, .T. ) ; +#701 = EDGE_LOOP ( 'NONE', ( #1564, #1326 ) ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, -6.249999999999996400 ) ) ; +#703 = ORIENTED_EDGE ( 'NONE', *, *, #1046, .F. ) ; +#704 = ORIENTED_EDGE ( 'NONE', *, *, #1361, .T. ) ; +#705 = CIRCLE ( 'NONE', #545, 1.843835023555569200 ) ; +#706 = EDGE_LOOP ( 'NONE', ( #1816, #2171, #1569, #618 ) ) ; +#707 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #846, #1370 ) ; +#708 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, -6.250000000000003600 ) ) ; +#709 = AXIS2_PLACEMENT_3D ( 'NONE', #477, #1558, #309 ) ; +#710 = CIRCLE ( 'NONE', #1801, 5.000000000000000900 ) ; +#711 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#712 = CIRCLE ( 'NONE', #2175, 32.50000000000001400 ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( -6.000000000000067500, 20.78869031963125000, 3.750000000000000400 ) ) ; +#714 = VERTEX_POINT ( 'NONE', #1346 ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( -21.99601352304347700, -19.99999999999999600, 4.561727240060580600 ) ) ; +#716 = VERTEX_POINT ( 'NONE', #628 ) ; +#717 = AXIS2_PLACEMENT_3D ( 'NONE', #1069, #31, #1250 ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.373322751814975100E-016, 1.250000000000000700 ) ) ; +#719 = ORIENTED_EDGE ( 'NONE', *, *, #1562, .T. ) ; +#720 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #1190, #2257 ) ; +#721 = ORIENTED_EDGE ( 'NONE', *, *, #1712, .F. ) ; +#722 = ORIENTED_EDGE ( 'NONE', *, *, #1160, .F. ) ; +#723 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#724 = ORIENTED_EDGE ( 'NONE', *, *, #1867, .F. ) ; +#725 = FACE_BOUND ( 'NONE', #1409, .T. ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, -9.999999999999998200, -7.500000000000003600 ) ) ; +#727 = ORIENTED_EDGE ( 'NONE', *, *, #1332, .F. ) ; +#728 = AXIS2_PLACEMENT_3D ( 'NONE', #2264, #1015, #2108 ) ; +#729 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#730 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000002100, -7.499999999999996400, 3.750000000000000900 ) ) ; +#731 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -9.999999999999998200, -7.500000000000003600 ) ) ; +#732 = APPROVAL_DATE_TIME ( #1220, #1565 ) ; +#733 = AXIS2_PLACEMENT_3D ( 'NONE', #1956, #1575, #323 ) ; +#734 = FACE_OUTER_BOUND ( 'NONE', #540, .T. ) ; +#735 = LINE ( 'NONE', #2045, #635 ) ; +#736 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#737 = ORIENTED_EDGE ( 'NONE', *, *, #1485, .T. ) ; +#738 = VERTEX_POINT ( 'NONE', #1724 ) ; +#739 = AXIS2_PLACEMENT_3D ( 'NONE', #1961, #669, #1772 ) ; +#740 = VERTEX_POINT ( 'NONE', #293 ) ; +#741 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.469446951953611000E-015, 0.0000000000000000000 ) ) ; +#742 = VECTOR ( 'NONE', #1948, 1000.000000000000000 ) ; +#743 = ORIENTED_EDGE ( 'NONE', *, *, #1633, .T. ) ; +#744 = EDGE_CURVE ( 'NONE', #151, #875, #51, .T. ) ; +#745 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.549511112383311500E-015, 0.0000000000000000000 ) ) ; +#746 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, 3.750000000000004900 ) ) ; +#747 = EDGE_CURVE ( 'NONE', #142, #2131, #462, .T. ) ; +#748 = ORIENTED_EDGE ( 'NONE', *, *, #1362, .T. ) ; +#749 = CIRCLE ( 'NONE', #538, 4.999999999999997300 ) ; +#750 = ORIENTED_EDGE ( 'NONE', *, *, #1744, .F. ) ; +#751 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 25.00000000000000000, -11.25000000000000400 ) ) ; +#752 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.541976423090495400E-016, 1.000000000000000000 ) ) ; +#753 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#754 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -14.99999999999999600, -3.750000000000003600 ) ) ; +#755 = EDGE_CURVE ( 'NONE', #1117, #740, #34, .T. ) ; +#756 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 12.50000000000000000, 1.250000000000002700 ) ) ; +#757 = VECTOR ( 'NONE', #959, 1000.000000000000000 ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 20.00000000000000400, -3.749999999999996400 ) ) ; +#759 = LINE ( 'NONE', #2130, #1249 ) ; +#760 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.734723475976806800E-016 ) ) ; +#762 = EDGE_CURVE ( 'NONE', #142, #610, #52, .T. ) ; +#763 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.74903099319422100, 8.750000000000000000 ) ) ; +#764 = FACE_OUTER_BOUND ( 'NONE', #1623, .T. ) ; +#765 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.30094986796400700, 4.605854837713186700 ) ) ; +#766 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999998200, -7.499999999999996400, 8.750000000000000000 ) ) ; +#768 = EDGE_LOOP ( 'NONE', ( #512, #1700, #1971, #721 ) ) ; +#769 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#770 = CARTESIAN_POINT ( 'NONE', ( -5.555555555555555400, 23.85322457671660200, 6.250000000000000000 ) ) ; +#771 = ORIENTED_EDGE ( 'NONE', *, *, #1887, .F. ) ; +#772 = ORIENTED_EDGE ( 'NONE', *, *, #1442, .F. ) ; +#773 = EDGE_CURVE ( 'NONE', #850, #356, #49, .T. ) ; +#774 = CARTESIAN_POINT ( 'NONE', ( -5.731546592292941600, 22.58260139201371100, 4.205427626802750400 ) ) ; +#775 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 9.094669181828613900E-032 ) ) ; +#776 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1896 ) ; +#777 = EDGE_CURVE ( 'NONE', #919, #2162, #29, .T. ) ; +#778 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#779 = ORIENTED_EDGE ( 'NONE', *, *, #1281, .T. ) ; +#780 = FACE_BOUND ( 'NONE', #1998, .T. ) ; +#781 = ORIENTED_EDGE ( 'NONE', *, *, #1328, .T. ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000830400, 21.13497622850719500, 3.692669077234064900 ) ) ; +#783 = VERTEX_POINT ( 'NONE', #1327 ) ; +#784 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000200, 1.250000000000002700 ) ) ; +#786 = PLANE ( 'NONE', #2014 ) ; +#787 = APPROVAL_ROLE ( '' ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, 22.50000000000000000, 1.250000000000001100 ) ) ; +#789 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#790 = EDGE_CURVE ( 'NONE', #642, #1604, #7, .T. ) ; +#791 = APPROVAL_PERSON_ORGANIZATION ( #1272, #1565, #965 ) ; +#792 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#793 = FACE_OUTER_BOUND ( 'NONE', #1641, .T. ) ; +#794 = EDGE_CURVE ( 'NONE', #2010, #356, #2273, .T. ) ; +#795 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -14.99999999999999600, -3.750000000000003600 ) ) ; +#796 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.60601730895057300, 5.280668901632118700 ) ) ; +#797 = LINE ( 'NONE', #1607, #2235 ) ; +#798 = EDGE_CURVE ( 'NONE', #238, #1566, #216, .T. ) ; +#799 = PLANE ( 'NONE', #2 ) ; +#800 = ORIENTED_EDGE ( 'NONE', *, *, #1624, .F. ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -4.999999999999998200, -6.249999999999999100 ) ) ; +#802 = ORIENTED_EDGE ( 'NONE', *, *, #1635, .T. ) ; +#803 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.99999999999999600, 3.750000000000000400 ) ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#805 = VERTEX_POINT ( 'NONE', #962 ) ; +#806 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 23.34592140010545700, 4.484559976118313300 ) ) ; +#807 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#808 = ORIENTED_EDGE ( 'NONE', *, *, #920, .T. ) ; +#809 = ORIENTED_EDGE ( 'NONE', *, *, #1502, .F. ) ; +#810 = EDGE_CURVE ( 'NONE', #1320, #978, #1830, .T. ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -8.700000000000002800 ) ) ; +#812 = PLANE ( 'NONE', #686 ) ; +#813 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#814 = ORIENTED_EDGE ( 'NONE', *, *, #1055, .F. ) ; +#815 = VECTOR ( 'NONE', #2205, 1000.000000000000000 ) ; +#816 = EDGE_CURVE ( 'NONE', #1345, #1347, #847, .T. ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( 25.77962810908496000, 22.24926692502647900, 4.037538771082454400 ) ) ; +#818 = ORIENTED_EDGE ( 'NONE', *, *, #826, .F. ) ; +#819 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#820 = LINE ( 'NONE', #467, #1291 ) ; +#821 = ADVANCED_FACE ( 'NONE', ( #2065 ), #282, .T. ) ; +#822 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#823 = CIRCLE ( 'NONE', #400, 4.999999999999997300 ) ; +#824 = DIRECTION ( 'NONE', ( 4.898587196589413700E-017, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#825 = LINE ( 'NONE', #1030, #2201 ) ; +#826 = EDGE_CURVE ( 'NONE', #311, #738, #1735, .T. ) ; +#827 = CIRCLE ( 'NONE', #6, 5.000000000000000000 ) ; +#828 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -4.999999999999998200, -11.25000000000000000 ) ) ; +#830 = EDGE_CURVE ( 'NONE', #398, #2061, #1447, .T. ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -4.999999999999999100, 1.249999999999999800 ) ) ; +#832 = CARTESIAN_POINT ( 'NONE', ( 25.94285310862497300, 21.15441314109915200, 3.750000000000000900 ) ) ; +#833 = ORIENTED_EDGE ( 'NONE', *, *, #1458, .F. ) ; +#834 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -9.999999999999998200, -7.500000000000003600 ) ) ; +#835 = ADVANCED_FACE ( 'NONE', ( #598 ), #381, .F. ) ; +#836 = EDGE_LOOP ( 'NONE', ( #1825, #559, #867, #2030 ) ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#838 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .T. ) ; +#839 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -4.999999999999998200, -3.750000000000000400 ) ) ; +#840 = EDGE_LOOP ( 'NONE', ( #2009, #1765, #552 ) ) ; +#841 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#842 = ORIENTED_EDGE ( 'NONE', *, *, #1394, .F. ) ; +#843 = EDGE_CURVE ( 'NONE', #1800, #716, #2129, .T. ) ; +#844 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, -6.250000000000003600 ) ) ; +#845 = ORIENTED_EDGE ( 'NONE', *, *, #1163, .F. ) ; +#846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#847 = CIRCLE ( 'NONE', #720, 1.199999999999999700 ) ; +#848 = ADVANCED_FACE ( 'NONE', ( #2225, #780, #725, #1324 ), #812, .T. ) ; +#849 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#850 = VERTEX_POINT ( 'NONE', #637 ) ; +#851 = EDGE_CURVE ( 'NONE', #1241, #642, #949, .T. ) ; +#852 = CIRCLE ( 'NONE', #233, 1.200000000000000600 ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000001800, 42.34772228646442500 ) ) ; +#854 = VECTOR ( 'NONE', #45, 1000.000000000000000 ) ; +#855 = CARTESIAN_POINT ( 'NONE', ( 7.640676835127708300, 20.00000000000000000, 3.408037123223329100 ) ) ; +#856 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#857 = LINE ( 'NONE', #442, #1 ) ; +#858 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#859 = ADVANCED_FACE ( 'NONE', ( #2270 ), #2187, .F. ) ; +#860 = LINE ( 'NONE', #844, #508 ) ; +#861 = EDGE_CURVE ( 'NONE', #565, #274, #2249, .T. ) ; +#862 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 24.22980869553963500, 4.446856941976240500 ) ) ; +#863 = VERTEX_POINT ( 'NONE', #1334 ) ; +#864 = EDGE_CURVE ( 'NONE', #1316, #2143, #2195, .T. ) ; +#865 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -11.25000000000000500 ) ) ; +#866 = EDGE_LOOP ( 'NONE', ( #2124, #1974, #800, #90 ) ) ; +#867 = ORIENTED_EDGE ( 'NONE', *, *, #1506, .T. ) ; +#868 = MANIFOLD_SOLID_BREP ( 'Fillet16', #957 ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( -5.558840526582094400, 23.82870468659144000, 5.882490956734231200 ) ) ; +#870 = ORIENTED_EDGE ( 'NONE', *, *, #1013, .F. ) ; +#871 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#872 = ADVANCED_FACE ( 'NONE', ( #2040 ), #2002, .T. ) ; +#873 = CARTESIAN_POINT ( 'NONE', ( 42.54388966203678300, -20.00000000000000000, 5.413645484777071600 ) ) ; +#874 = ORIENTED_EDGE ( 'NONE', *, *, #1085, .T. ) ; +#875 = VERTEX_POINT ( 'NONE', #155 ) ; +#876 = EDGE_CURVE ( 'NONE', #916, #740, #2102, .T. ) ; +#877 = CYLINDRICAL_SURFACE ( 'NONE', #560, 5.000000000000004400 ) ; +#878 = ORIENTED_EDGE ( 'NONE', *, *, #1679, .F. ) ; +#879 = CARTESIAN_POINT ( 'NONE', ( -6.000000000000067500, 20.78869031963125000, 3.750000000000000400 ) ) ; +#880 = EDGE_CURVE ( 'NONE', #401, #1117, #2033, .T. ) ; +#881 = CARTESIAN_POINT ( 'NONE', ( 14.56898265822195900, 20.00000000000000000, 2.478399547891076100 ) ) ; +#882 = FACE_OUTER_BOUND ( 'NONE', #1009, .T. ) ; +#883 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #770, #951, #1134 ), + ( #101, #1321, #267 ), + ( #944, #2203, #1121 ), + ( #87, #1305, #255 ), + ( #1500, #420, #1687 ), + ( #592, #1881, #765 ), + ( #2046, #954, #2209 ), + ( #1130, #96, #1314 ), + ( #262, #1509, #429 ), + ( #1695, #600, #1890 ), + ( #774, #2056, #961 ), + ( #2219, #1137, #104 ), + ( #1325, #272, #1519 ), + ( #439, #1705, #611 ), + ( #1899, #782, #2066 ), + ( #971, #2228, #1148 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.01220279259135010100, 0.01293570932510244700, 0.01366862605885479200, 0.01440154279260713900, 0.01513445952635948500, 0.01586737626011183000, 0.01660029299386417800, 0.01806612646136886900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8498365855987978200, 1.000000000000000000), + ( 1.000000000000000000, 0.8498317104078063600, 1.000000000000000000), + ( 1.000000000000000000, 0.8489568960993785200, 1.000000000000000000), + ( 1.000000000000000000, 0.8454954625233637200, 1.000000000000000000), + ( 1.000000000000000000, 0.8428661190299205900, 1.000000000000000000), + ( 1.000000000000000000, 0.8360700386706990700, 1.000000000000000000), + ( 1.000000000000000000, 0.8318796577027286500, 1.000000000000000000), + ( 1.000000000000000000, 0.8218961539110326600, 1.000000000000000000), + ( 1.000000000000000000, 0.8162380819437009500, 1.000000000000000000), + ( 1.000000000000000000, 0.8035293939049252800, 1.000000000000000000), + ( 1.000000000000000000, 0.7964199641639705400, 1.000000000000000000), + ( 1.000000000000000000, 0.7811811573563062200, 1.000000000000000000), + ( 1.000000000000000000, 0.7730055204205138500, 1.000000000000000000), + ( 1.000000000000000000, 0.7465788207844488200, 1.000000000000000000), + ( 1.000000000000000000, 0.7269873894998779600, 1.000000000000000000), + ( 1.000000000000000000, 0.7055703913634487900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#884 = ADVANCED_FACE ( 'NONE', ( #1886 ), #1835, .T. ) ; +#885 = CYLINDRICAL_SURFACE ( 'NONE', #299, 5.000000000000000900 ) ; +#886 = CIRCLE ( 'NONE', #1891, 10.00000000000002500 ) ; +#887 = LINE ( 'NONE', #995, #372 ) ; +#888 = ORIENTED_EDGE ( 'NONE', *, *, #1376, .F. ) ; +#889 = EDGE_CURVE ( 'NONE', #1604, #1238, #1857, .T. ) ; +#890 = ORIENTED_EDGE ( 'NONE', *, *, #1834, .T. ) ; +#891 = ADVANCED_FACE ( 'NONE', ( #1955 ), #2151, .T. ) ; +#892 = ORIENTED_EDGE ( 'NONE', *, *, #1332, .T. ) ; +#893 = EDGE_CURVE ( 'NONE', #1238, #518, #1804, .T. ) ; +#894 = ORIENTED_EDGE ( 'NONE', *, *, #1573, .T. ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, -7.499999999999996400, 3.750000000000000400 ) ) ; +#896 = LINE ( 'NONE', #1311, #334 ) ; +#897 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#898 = ORIENTED_EDGE ( 'NONE', *, *, #1619, .F. ) ; +#899 = CIRCLE ( 'NONE', #550, 3.750000000000000000 ) ; +#900 = VERTEX_POINT ( 'NONE', #708 ) ; +#901 = CIRCLE ( 'NONE', #585, 5.000000000000000900 ) ; +#902 = EDGE_CURVE ( 'NONE', #805, #468, #1778, .T. ) ; +#903 = CARTESIAN_POINT ( 'NONE', ( -21.60520143347354600, -19.99999999999999600, 4.234048345906186800 ) ) ; +#904 = VERTEX_POINT ( 'NONE', #702 ) ; +#905 = ADVANCED_FACE ( 'NONE', ( #2152 ), #1622, .F. ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 23.57196217300909100, 3.750000000000000400 ) ) ; +#907 = EDGE_CURVE ( 'NONE', #2250, #1994, #1678, .T. ) ; +#908 = FACE_OUTER_BOUND ( 'NONE', #2269, .T. ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 3.385621722338496600, 20.00000000000000400, 1.250000000000003800 ) ) ; +#910 = FACE_OUTER_BOUND ( 'NONE', #2126, .T. ) ; +#911 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#912 = FACE_OUTER_BOUND ( 'NONE', #651, .T. ) ; +#913 = EDGE_CURVE ( 'NONE', #714, #2250, #1651, .T. ) ; +#914 = ORIENTED_EDGE ( 'NONE', *, *, #762, .F. ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, 22.50000000000000000, 8.750000000000000000 ) ) ; +#916 = VERTEX_POINT ( 'NONE', #1075 ) ; +#917 = EDGE_CURVE ( 'NONE', #714, #151, #1464, .T. ) ; +#918 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#919 = VERTEX_POINT ( 'NONE', #895 ) ; +#920 = EDGE_CURVE ( 'NONE', #2144, #953, #1601, .T. ) ; +#921 = ORIENTED_EDGE ( 'NONE', *, *, #798, .F. ) ; +#922 = VERTEX_POINT ( 'NONE', #909 ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 8.750000000000000000 ) ) ; +#924 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000000, 6.250000000000001800 ) ) ; +#925 = ORIENTED_EDGE ( 'NONE', *, *, #1972, .T. ) ; +#926 = LINE ( 'NONE', #586, #815 ) ; +#927 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 20.00000000000000000, 6.250000000000001800 ) ) ; +#928 = EDGE_LOOP ( 'NONE', ( #704, #2241, #1084, #1089, #2246 ) ) ; +#929 = EDGE_CURVE ( 'NONE', #13, #401, #1470, .T. ) ; +#930 = CARTESIAN_POINT ( 'NONE', ( 42.69174207655505900, -19.99999999999999600, 6.250000000000000000 ) ) ; +#931 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#932 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#933 = EDGE_CURVE ( 'NONE', #329, #1238, #1415, .T. ) ; +#934 = LINE ( 'NONE', #1441, #854 ) ; +#935 = LINE ( 'NONE', #1764, #1935 ) ; +#936 = CIRCLE ( 'NONE', #165, 35.00000000000001400 ) ; +#937 = VECTOR ( 'NONE', #1333, 1000.000000000000000 ) ; +#938 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 30.00000000000000000, 8.750000000000000000 ) ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000001800, 42.34772228646442500 ) ) ; +#940 = ORIENTED_EDGE ( 'NONE', *, *, #744, .T. ) ; +#941 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 20.00000000000000000, 3.750000000000053700 ) ) ; +#942 = ORIENTED_EDGE ( 'NONE', *, *, #1954, .T. ) ; +#943 = EDGE_CURVE ( 'NONE', #1604, #1491, #1629, .T. ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( -5.558550367850555700, 23.83087293116875900, 5.898542825961351700 ) ) ; +#945 = VERTEX_POINT ( 'NONE', #1652 ) ; +#946 = CARTESIAN_POINT ( 'NONE', ( 26.00000000000000400, 20.78869031963129300, 3.750000000000000400 ) ) ; +#947 = ORIENTED_EDGE ( 'NONE', *, *, #816, .T. ) ; +#948 = EDGE_CURVE ( 'NONE', #1491, #2250, #1501, .T. ) ; +#949 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1393, #1929, #1882, #1755, #492, #1763, #1203, #1706 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 4.336808689942017700E-019, 0.001429071307273697200, 0.002143606960910547000, 0.002858142614547396600 ), + .UNSPECIFIED. ) ; +#950 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -2.312964634635743000E-016 ) ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.12885732024817300, 6.249999999999998200 ) ) ; +#952 = ORIENTED_EDGE ( 'NONE', *, *, #830, .T. ) ; +#953 = VERTEX_POINT ( 'NONE', #915 ) ; +#954 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999676700, 23.61725360408927800, 4.779445314395492700 ) ) ; +#955 = CYLINDRICAL_SURFACE ( 'NONE', #571, 7.500000000000000000 ) ; +#956 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#957 = CLOSED_SHELL ( 'NONE', ( #1057, #1406, #884, #1934, #992, #1969, #1590, #859, #1225, #1537, #1732, #872, #1006, #1071, #1204, #1247, #1748, #1632, #1828, #1759, #1445, #1088, #1613, #1096, #1384, #1179, #1640, #1453, #2000, #1217, #1773, #1035, #1550, #835, #1258, #1912, #1047, #1419, #1016, #1784, #848, #891, #1340, #1960, #1157, #1625, #985, #1432, #1991, #1720, #1530, #821, #1237, #1807, #1576, #1268, #1918, #1078, #1602, #905, #1360, #1982, #1164 ) ) ; +#958 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#959 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#960 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#961 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 23.09562110185052600, 3.387598678595736200 ) ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( 42.50000000000001400, -7.499999999999996400, 3.750000000000000400 ) ) ; +#963 = EDGE_CURVE ( 'NONE', #2191, #2089, #1357, .T. ) ; +#964 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584918500E-032 ) ) ; +#965 = APPROVAL_ROLE ( '' ) ; +#966 = CYLINDRICAL_SURFACE ( 'NONE', #1667, 35.00000000000001400 ) ; +#967 = EDGE_CURVE ( 'NONE', #537, #190, #1391, .T. ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 30.00000000000000000, 1.250000000000001100 ) ) ; +#969 = VECTOR ( 'NONE', #349, 1000.000000000000000 ) ; +#970 = CIRCLE ( 'NONE', #128, 4.999999999999998200 ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( -6.004340845662461000, 20.76092886199801800, 3.750096999500710700 ) ) ; +#972 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 0.0000000000000000000, 3.750000000000000400 ) ) ; +#973 = DIRECTION ( 'NONE', ( 2.602085213965204300E-015, 1.000000000000000000, 1.517883041479702500E-016 ) ) ; +#974 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#975 = ORIENTED_EDGE ( 'NONE', *, *, #1781, .T. ) ; +#976 = ORIENTED_EDGE ( 'NONE', *, *, #1902, .T. ) ; +#977 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#978 = VERTEX_POINT ( 'NONE', #1283 ) ; +#979 = EDGE_CURVE ( 'NONE', #2089, #419, #1153, .T. ) ; +#980 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 2.308220447633426100E-016, 1.000000000000000000 ) ) ; +#981 = ORIENTED_EDGE ( 'NONE', *, *, #861, .T. ) ; +#982 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#983 = EDGE_CURVE ( 'NONE', #1976, #2076, #1242, .T. ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( 25.57028083650769200, 23.74375248555514900, 5.557620643987115200 ) ) ; +#985 = ADVANCED_FACE ( 'NONE', ( #1289 ), #1019, .F. ) ; +#986 = VERTEX_POINT ( 'NONE', #240 ) ; +#987 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#988 = ORIENTED_EDGE ( 'NONE', *, *, #943, .F. ) ; +#989 = FACE_OUTER_BOUND ( 'NONE', #1285, .T. ) ; +#990 = ORIENTED_EDGE ( 'NONE', *, *, #1823, .T. ) ; +#991 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, -7.499999999999995600, 8.750000000000000000 ) ) ; +#992 = ADVANCED_FACE ( 'NONE', ( #1070 ), #955, .F. ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, -3.749999999999994700 ) ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 23.68252286915920000, 3.839195658860554700 ) ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 19.99999999999999600, 29.96320343559642300 ) ) ; +#996 = EDGE_CURVE ( 'NONE', #2184, #19, #1118, .T. ) ; +#997 = DATE_AND_TIME ( #1478, #1988 ) ; +#998 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#999 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 5.000000000000000900, 3.750000000000043100 ) ) ; +#1000 = CIRCLE ( 'NONE', #1945, 1.200000000000000600 ) ; +#1001 = EDGE_CURVE ( 'NONE', #63, #433, #1114, .T. ) ; +#1002 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 22.13121820900688900, 3.817742252893104200 ) ) ; +#1004 = FACE_OUTER_BOUND ( 'NONE', #1743, .T. ) ; +#1005 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1006 = ADVANCED_FACE ( 'NONE', ( #989 ), #877, .T. ) ; +#1007 = ORIENTED_EDGE ( 'NONE', *, *, #1438, .F. ) ; +#1008 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 6.250000000000000000 ) ) ; +#1009 = EDGE_LOOP ( 'NONE', ( #1469, #653, #541, #1256 ) ) ; +#1010 = VERTEX_POINT ( 'NONE', #1873 ) ; +#1011 = VERTEX_POINT ( 'NONE', #756 ) ; +#1012 = ORIENTED_EDGE ( 'NONE', *, *, #948, .F. ) ; +#1013 = EDGE_CURVE ( 'NONE', #953, #2184, #926, .T. ) ; +#1014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 6.938893903907107100E-016, -1.000000000000000000 ) ) ; +#1015 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584918500E-032 ) ) ; +#1016 = ADVANCED_FACE ( 'NONE', ( #908 ), #1863, .T. ) ; +#1017 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999300, -7.500000000000003600 ) ) ; +#1018 = ORIENTED_EDGE ( 'NONE', *, *, #1426, .T. ) ; +#1019 = CYLINDRICAL_SURFACE ( 'NONE', #576, 7.500000000000000000 ) ; +#1020 = EDGE_CURVE ( 'NONE', #421, #2153, #901, .T. ) ; +#1021 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1023 = VECTOR ( 'NONE', #2050, 1000.000000000000000 ) ; +#1024 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1025 = VECTOR ( 'NONE', #2070, 1000.000000000000000 ) ; +#1026 = FACE_OUTER_BOUND ( 'NONE', #1627, .T. ) ; +#1027 = EDGE_CURVE ( 'NONE', #523, #648, #899, .T. ) ; +#1028 = VECTOR ( 'NONE', #1032, 1000.000000000000000 ) ; +#1029 = EDGE_CURVE ( 'NONE', #57, #1648, #705, .T. ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( 42.69174207655505900, -19.99999999999999600, 3.750000000000000900 ) ) ; +#1031 = ORIENTED_EDGE ( 'NONE', *, *, #1214, .T. ) ; +#1032 = DIRECTION ( 'NONE', ( 6.419766481290786900E-032, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#1033 = EDGE_LOOP ( 'NONE', ( #2169, #1995, #802 ) ) ; +#1034 = CARTESIAN_POINT ( 'NONE', ( 5.964837404163906100, 19.99999999999999600, 2.748058736595659500 ) ) ; +#1035 = ADVANCED_FACE ( 'NONE', ( #700, #682 ), #2041, .F. ) ; +#1036 = ORIENTED_EDGE ( 'NONE', *, *, #755, .F. ) ; +#1037 = VECTOR ( 'NONE', #2252, 1000.000000000000000 ) ; +#1038 = VERTEX_POINT ( 'NONE', #88 ) ; +#1039 = EDGE_CURVE ( 'NONE', #514, #2061, #749, .T. ) ; +#1040 = DIRECTION ( 'NONE', ( 6.425253049669015300E-032, -2.308220447633426100E-016, -1.000000000000000000 ) ) ; +#1041 = EDGE_CURVE ( 'NONE', #1011, #916, #646, .T. ) ; +#1042 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 23.57196217300909100, 3.750000000000000400 ) ) ; +#1043 = ORIENTED_EDGE ( 'NONE', *, *, #1136, .F. ) ; +#1044 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002100, -19.99999999999999600, 3.750000000000000400 ) ) ; +#1045 = ORIENTED_EDGE ( 'NONE', *, *, #1274, .F. ) ; +#1046 = EDGE_CURVE ( 'NONE', #2208, #1412, #590, .T. ) ; +#1047 = ADVANCED_FACE ( 'NONE', ( #563, #654 ), #1140, .F. ) ; +#1048 = CARTESIAN_POINT ( 'NONE', ( -5.581220018027859300, 23.66269912261454400, 5.354810571017264200 ) ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -3.749999999999994700 ) ) ; +#1050 = PERSON_AND_ORGANIZATION ( #1187, #2231 ) ; +#1051 = CARTESIAN_POINT ( 'NONE', ( 42.67253244069550500, -20.00000000000000000, 5.906160256943628900 ) ) ; +#1052 = VECTOR ( 'NONE', #1371, 1000.000000000000000 ) ; +#1053 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #345, #667, #1787, #684, #1977, #862, #2133, #1042 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 8.673617379884035500E-019, 0.0007077894032358271200, 0.001415578806471653400, 0.002831157612943303300 ), + .UNSPECIFIED. ) ; +#1054 = FACE_OUTER_BOUND ( 'NONE', #1921, .T. ) ; +#1055 = EDGE_CURVE ( 'NONE', #468, #2191, #504, .T. ) ; +#1056 = EDGE_LOOP ( 'NONE', ( #1374, #2211, #170, #1045 ) ) ; +#1057 = ADVANCED_FACE ( 'NONE', ( #547 ), #498, .T. ) ; +#1058 = EDGE_CURVE ( 'NONE', #326, #1267, #495, .T. ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( 13.21376391339144800, 20.00000000000000000, 3.094252132956566600 ) ) ; +#1060 = ORIENTED_EDGE ( 'NONE', *, *, #1808, .T. ) ; +#1061 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.373322751814975100E-016, 1.250000000000000700 ) ) ; +#1062 = ORIENTED_EDGE ( 'NONE', *, *, #1919, .F. ) ; +#1063 = FACE_BOUND ( 'NONE', #2181, .T. ) ; +#1064 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1065 = ORIENTED_EDGE ( 'NONE', *, *, #979, .T. ) ; +#1066 = EDGE_LOOP ( 'NONE', ( #2274, #1356, #981, #1259, #952, #2271, #1244, #375 ) ) ; +#1067 = EDGE_LOOP ( 'NONE', ( #2149, #2197, #1261, #1043, #39, #2120, #1007, #393, #2166, #1031, #1591 ) ) ; +#1068 = EDGE_CURVE ( 'NONE', #1282, #1616, #521, .T. ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 42.50000000000001400, -7.499999999999996400, 6.250000000000000000 ) ) ; +#1070 = FACE_OUTER_BOUND ( 'NONE', #672, .T. ) ; +#1071 = ADVANCED_FACE ( 'NONE', ( #443 ), #312, .T. ) ; +#1072 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1073 = EDGE_CURVE ( 'NONE', #2131, #805, #366, .T. ) ; +#1074 = VECTOR ( 'NONE', #1021, 1000.000000000000000 ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( 16.61437827766150500, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1076 = VECTOR ( 'NONE', #2198, 1000.000000000000000 ) ; +#1077 = CYLINDRICAL_SURFACE ( 'NONE', #1752, 3.750000000000000000 ) ; +#1078 = ADVANCED_FACE ( 'NONE', ( #465 ), #430, .T. ) ; +#1079 = VECTOR ( 'NONE', #2118, 1000.000000000000000 ) ; +#1080 = CARTESIAN_POINT ( 'NONE', ( -21.15990486868630100, -19.99999999999999600, 3.986673294178612700 ) ) ; +#1081 = EDGE_CURVE ( 'NONE', #1529, #1800, #247, .T. ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #773, .F. ) ; +#1083 = PLANE ( 'NONE', #289 ) ; +#1084 = ORIENTED_EDGE ( 'NONE', *, *, #1898, .T. ) ; +#1085 = EDGE_CURVE ( 'NONE', #1491, #1775, #402, .T. ) ; +#1086 = ORIENTED_EDGE ( 'NONE', *, *, #1833, .F. ) ; +#1087 = CONICAL_SURFACE ( 'NONE', #222, 2.500000000000000400, 0.08726646259971666800 ) ; +#1088 = ADVANCED_FACE ( 'NONE', ( #200 ), #1676, .F. ) ; +#1089 = ORIENTED_EDGE ( 'NONE', *, *, #1794, .T. ) ; +#1090 = EDGE_CURVE ( 'NONE', #1557, #537, #124, .T. ) ; +#1091 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1092 = ORIENTED_EDGE ( 'NONE', *, *, #843, .F. ) ; +#1093 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999999999999300, -7.500000000000003600 ) ) ; +#1094 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1095 = EDGE_CURVE ( 'NONE', #1775, #714, #224, .T. ) ; +#1096 = ADVANCED_FACE ( 'NONE', ( #91 ), #1683, .F. ) ; +#1097 = LOCAL_TIME ( 15, 7, 0.0000000000000000000, #1608 ) ; +#1098 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1099 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 2.500000000000000400 ) ) ; +#1100 = FACE_OUTER_BOUND ( 'NONE', #1287, .T. ) ; +#1101 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 25.00000000000000000, -6.249999999999998200 ) ) ; +#1103 = LINE ( 'NONE', #1507, #2025 ) ; +#1104 = EDGE_CURVE ( 'NONE', #468, #1372, #54, .T. ) ; +#1105 = EDGE_LOOP ( 'NONE', ( #35, #2068 ) ) ; +#1106 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1107 = PLANE ( 'NONE', #1650 ) ; +#1108 = VERTEX_POINT ( 'NONE', #259 ) ; +#1109 = EDGE_CURVE ( 'NONE', #1372, #2089, #37, .T. ) ; +#1110 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1111 = CYLINDRICAL_SURFACE ( 'NONE', #269, 1.200000000000000600 ) ; +#1112 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1113 = ORIENTED_EDGE ( 'NONE', *, *, #1068, .F. ) ; +#1114 = CIRCLE ( 'NONE', #588, 1.200000000000000600 ) ; +#1115 = ORIENTED_EDGE ( 'NONE', *, *, #1160, .T. ) ; +#1116 = ORIENTED_EDGE ( 'NONE', *, *, #1686, .T. ) ; +#1117 = VERTEX_POINT ( 'NONE', #1310 ) ; +#1118 = LINE ( 'NONE', #938, #1076 ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -4.999999999999998200, -6.249999999999998200 ) ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000000, 6.250000000000001800 ) ) ; +#1121 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.71981619856763900, 5.757959956296011800 ) ) ; +#1122 = EDGE_CURVE ( 'NONE', #1704, #514, #823, .T. ) ; +#1123 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 8.750000000000000000 ) ) ; +#1124 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 30.00000000000000400, -6.249999999999984900 ) ) ; +#1125 = LINE ( 'NONE', #788, #1025 ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -9.999999999999998200, -6.300000000000002500 ) ) ; +#1127 = EDGE_CURVE ( 'NONE', #2042, #953, #1682, .T. ) ; +#1128 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1129 = CIRCLE ( 'NONE', #1813, 1.199999999999999700 ) ; +#1130 = CARTESIAN_POINT ( 'NONE', ( -5.649023258872635000, 23.16833770492783600, 4.652065073599017900 ) ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999999999999300, -6.300000000000002500 ) ) ; +#1132 = LINE ( 'NONE', #2272, #1079 ) ; +#1133 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1134 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.74903099319421800, 6.250000000000000000 ) ) ; +#1135 = EDGE_LOOP ( 'NONE', ( #988, #77, #145, #168 ) ) ; +#1136 = EDGE_CURVE ( 'NONE', #191, #1489, #94, .T. ) ; +#1137 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999785100, 22.32180904357693800, 3.876184244807622500 ) ) ; +#1138 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .T. ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999998200, -6.249999999999998200 ) ) ; +#1140 = PLANE ( 'NONE', #503 ) ; +#1141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.541976423090495400E-016, 1.000000000000000000 ) ) ; +#1142 = DATE_TIME_ROLE ( 'creation_date' ) ; +#1143 = EDGE_LOOP ( 'NONE', ( #2267, #120, #1677, #1206 ) ) ; +#1144 = EDGE_CURVE ( 'NONE', #945, #2042, #1508, .T. ) ; +#1145 = PLANE ( 'NONE', #387 ) ; +#1146 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.312964634635743000E-016, 0.0000000000000000000 ) ) ; +#1147 = EDGE_LOOP ( 'NONE', ( #814, #2073, #189, #1855 ) ) ; +#1148 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 20.75326367093200000, 2.750135799300994500 ) ) ; +#1149 = CARTESIAN_POINT ( 'NONE', ( 26.00000000000000400, 20.78869031963129300, 3.750000000000000400 ) ) ; +#1150 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 3.750000000000000400 ) ) ; +#1151 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.469446951953615200E-016, -5.349805401075657200E-032 ) ) ; +#1152 = EDGE_LOOP ( 'NONE', ( #1202, #561, #380, #1018, #578 ) ) ; +#1153 = CIRCLE ( 'NONE', #608, 1.000000000000000900 ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, 22.50000000000000000, 1.250000000000001100 ) ) ; +#1155 = ORIENTED_EDGE ( 'NONE', *, *, #1090, .F. ) ; +#1156 = EDGE_CURVE ( 'NONE', #83, #783, #204, .T. ) ; +#1157 = ADVANCED_FACE ( 'NONE', ( #1269 ), #1145, .T. ) ; +#1158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1159 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -19.99999999999999600, 3.750000000000000400 ) ) ; +#1160 = EDGE_CURVE ( 'NONE', #83, #2184, #1125, .T. ) ; +#1161 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 23.92672803703684500, 5.286336494817177800 ) ) ; +#1163 = EDGE_CURVE ( 'NONE', #433, #1345, #1580, .T. ) ; +#1164 = ADVANCED_FACE ( 'NONE', ( #1684 ), #76, .F. ) ; +#1165 = LINE ( 'NONE', #993, #1222 ) ; +#1166 = FACE_OUTER_BOUND ( 'NONE', #2028, .T. ) ; +#1167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -9.999999999999998200, -8.700000000000002800 ) ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 30.00000000000002100, -3.749999999999996400 ) ) ; +#1170 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1617, #362, #1992, #881, #2148, #1059, #21, #1243, #192, #1427, #369, #1626 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001784741985532786300, 0.003569483971065571700, 0.004461854963831964200, 0.005354225956598356700, 0.007138967942131141700 ), + .UNSPECIFIED. ) ; +#1171 = ORIENTED_EDGE ( 'NONE', *, *, #1095, .F. ) ; +#1172 = CARTESIAN_POINT ( 'NONE', ( 25.66759154274679100, 23.03493352963131400, 4.527996898944966400 ) ) ; +#1173 = ORIENTED_EDGE ( 'NONE', *, *, #1966, .F. ) ; +#1174 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 6.250000000000000000 ) ) ; +#1175 = VERTEX_POINT ( 'NONE', #150 ) ; +#1176 = EDGE_CURVE ( 'NONE', #2042, #83, #2158, .T. ) ; +#1177 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1178 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1179 = ADVANCED_FACE ( 'NONE', ( #2004, #257, #661 ), #488, .T. ) ; +#1180 = ORIENTED_EDGE ( 'NONE', *, *, #1898, .F. ) ; +#1181 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 30.00000000000002100, -3.749999999999996400 ) ) ; +#1182 = EDGE_CURVE ( 'NONE', #2131, #1372, #2202, .T. ) ; +#1183 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 21.73619467988188300, 2.820661926244431200 ) ) ; +#1184 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.469446951953614200E-016, 0.0000000000000000000 ) ) ; +#1185 = ORIENTED_EDGE ( 'NONE', *, *, #1263, .F. ) ; +#1186 = VECTOR ( 'NONE', #2161, 1000.000000000000000 ) ; +#1187 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#1188 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1189 = ORIENTED_EDGE ( 'NONE', *, *, #889, .F. ) ; +#1190 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 9.094669181828613900E-032 ) ) ; +#1191 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999995600, -9.999999999999998200, -6.250000000000001800 ) ) ; +#1192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.308220447633426100E-016, 1.000000000000000000 ) ) ; +#1193 = EDGE_CURVE ( 'NONE', #1775, #1378, #1584, .T. ) ; +#1194 = VECTOR ( 'NONE', #2232, 1000.000000000000000 ) ; +#1195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1196 = LINE ( 'NONE', #865, #371 ) ; +#1197 = EDGE_CURVE ( 'NONE', #2076, #19, #1811, .T. ) ; +#1198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1199 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1200 = CARTESIAN_POINT ( 'NONE', ( 25.81000147892910900, 22.04142831437586000, 3.956269916144807800 ) ) ; +#1201 = VECTOR ( 'NONE', #824, 1000.000000000000000 ) ; +#1202 = ORIENTED_EDGE ( 'NONE', *, *, #1539, .T. ) ; +#1203 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999999100, 24.74903099319421800, 6.010510315977976200 ) ) ; +#1204 = ADVANCED_FACE ( 'NONE', ( #1631 ), #1239, .T. ) ; +#1205 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -9.999999999999996400, -6.249999999999999100 ) ) ; +#1206 = ORIENTED_EDGE ( 'NONE', *, *, #1104, .F. ) ; +#1207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.08715574274765851300, -0.9961946980917455500 ) ) ; +#1208 = VERTEX_POINT ( 'NONE', #1793 ) ; +#1209 = ORIENTED_EDGE ( 'NONE', *, *, #1957, .F. ) ; +#1210 = EDGE_CURVE ( 'NONE', #1775, #642, #1754, .T. ) ; +#1211 = CARTESIAN_POINT ( 'NONE', ( 9.395316733633160700, 20.00000000000000400, 3.750000000000054200 ) ) ; +#1212 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.74903099319422100, 8.750000000000000000 ) ) ; +#1213 = ORIENTED_EDGE ( 'NONE', *, *, #920, .F. ) ; +#1214 = EDGE_CURVE ( 'NONE', #900, #1557, #2255, .T. ) ; +#1215 = ORIENTED_EDGE ( 'NONE', *, *, #1013, .T. ) ; +#1216 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000002500, -3.749999999999996400 ) ) ; +#1217 = ADVANCED_FACE ( 'NONE', ( #594, #882 ), #532, .F. ) ; +#1218 = ORIENTED_EDGE ( 'NONE', *, *, #1176, .T. ) ; +#1219 = CARTESIAN_POINT ( 'NONE', ( 4.393197106313728300, 20.00000000000000000, 1.895796419016570100 ) ) ; +#1220 = DATE_AND_TIME ( #1716, #2173 ) ; +#1221 = EDGE_CURVE ( 'NONE', #2092, #1372, #1578, .T. ) ; +#1222 = VECTOR ( 'NONE', #2244, 1000.000000000000000 ) ; +#1223 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1224 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999999100, 1.249999999999999800 ) ) ; +#1225 = ADVANCED_FACE ( 'NONE', ( #1864 ), #1298, .F. ) ; +#1226 = EDGE_CURVE ( 'NONE', #1994, #2191, #1331, .T. ) ; +#1227 = CARTESIAN_POINT ( 'NONE', ( 40.67814422013858400, -19.99999999999999600, 3.808751652703596900 ) ) ; +#1228 = VECTOR ( 'NONE', #871, 1000.000000000000000 ) ; +#1229 = ORIENTED_EDGE ( 'NONE', *, *, #1798, .F. ) ; +#1230 = ORIENTED_EDGE ( 'NONE', *, *, #1798, .T. ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( -5.620363763742084000, 23.37570491204287700, 4.885961936538538300 ) ) ; +#1232 = ORIENTED_EDGE ( 'NONE', *, *, #1655, .T. ) ; +#1233 = CARTESIAN_POINT ( 'NONE', ( 42.69174207655505900, -19.99999999999999600, 6.250000000000000000 ) ) ; +#1234 = VECTOR ( 'NONE', #1421, 1000.000000000000000 ) ; +#1235 = ORIENTED_EDGE ( 'NONE', *, *, #1810, .F. ) ; +#1236 = EDGE_CURVE ( 'NONE', #1378, #1241, #360, .T. ) ; +#1237 = ADVANCED_FACE ( 'NONE', ( #1364 ), #885, .F. ) ; +#1238 = VERTEX_POINT ( 'NONE', #2008 ) ; +#1239 = PLANE ( 'NONE', #347 ) ; +#1240 = EDGE_CURVE ( 'NONE', #740, #1011, #934, .T. ) ; +#1241 = VERTEX_POINT ( 'NONE', #906 ) ; +#1242 = CIRCLE ( 'NONE', #603, 5.000000000000000900 ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( 12.36378143289408400, 20.00000000000000000, 3.390922396892150900 ) ) ; +#1244 = ORIENTED_EDGE ( 'NONE', *, *, #1136, .T. ) ; +#1245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#1246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1247 = ADVANCED_FACE ( 'NONE', ( #1248 ), #1083, .T. ) ; +#1248 = FACE_OUTER_BOUND ( 'NONE', #928, .T. ) ; +#1249 = VECTOR ( 'NONE', #678, 1000.000000000000000 ) ; +#1250 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1251 = VECTOR ( 'NONE', #652, 1000.000000000000000 ) ; +#1252 = EDGE_CURVE ( 'NONE', #1557, #2150, #409, .T. ) ; +#1253 = FACE_OUTER_BOUND ( 'NONE', #589, .T. ) ; +#1254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1255 = EDGE_CURVE ( 'NONE', #464, #900, #475, .T. ) ; +#1256 = ORIENTED_EDGE ( 'NONE', *, *, #1808, .F. ) ; +#1257 = CARTESIAN_POINT ( 'NONE', ( -22.69174207655506600, -20.00000000000000000, 6.078379009203106700 ) ) ; +#1258 = ADVANCED_FACE ( 'NONE', ( #384 ), #1111, .F. ) ; +#1259 = ORIENTED_EDGE ( 'NONE', *, *, #1887, .T. ) ; +#1260 = CARTESIAN_POINT ( 'NONE', ( -5.247787288726585500, 22.35578696207987500, 3.750000000000000000 ) ) ; +#1261 = ORIENTED_EDGE ( 'NONE', *, *, #1361, .F. ) ; +#1262 = EDGE_LOOP ( 'NONE', ( #845, #1820, #342, #615 ) ) ; +#1263 = EDGE_CURVE ( 'NONE', #1347, #1345, #42, .T. ) ; +#1264 = CARTESIAN_POINT ( 'NONE', ( -20.67514709086910000, -19.99999999999999600, 3.824046536887951000 ) ) ; +#1265 = VERTEX_POINT ( 'NONE', #225 ) ; +#1266 = EDGE_CURVE ( 'NONE', #2168, #13, #99, .T. ) ; +#1267 = VERTEX_POINT ( 'NONE', #1654 ) ; +#1268 = ADVANCED_FACE ( 'NONE', ( #544 ), #2179, .F. ) ; +#1269 = FACE_OUTER_BOUND ( 'NONE', #1768, .T. ) ; +#1270 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#1271 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1272 = PERSON_AND_ORGANIZATION ( #1187, #2231 ) ; +#1273 = CYLINDRICAL_SURFACE ( 'NONE', #2039, 5.000000000000004400 ) ; +#1274 = EDGE_CURVE ( 'NONE', #2150, #464, #22, .T. ) ; +#1275 = LINE ( 'NONE', #513, #389 ) ; +#1276 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1277 = EDGE_CURVE ( 'NONE', #1648, #57, #2172, .T. ) ; +#1278 = EDGE_LOOP ( 'NONE', ( #79, #1280 ) ) ; +#1279 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#1280 = ORIENTED_EDGE ( 'NONE', *, *, #1766, .F. ) ; +#1281 = EDGE_CURVE ( 'NONE', #863, #850, #852, .T. ) ; +#1282 = VERTEX_POINT ( 'NONE', #927 ) ; +#1283 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, -4.999999999999999100, 1.249999999999999800 ) ) ; +#1284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 6.938893903907107100E-016, -1.000000000000000000 ) ) ; +#1285 = EDGE_LOOP ( 'NONE', ( #1155, #239, #1459, #176 ) ) ; +#1286 = DIRECTION ( 'NONE', ( -1.734723475976805600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1287 = EDGE_LOOP ( 'NONE', ( #808, #2038, #1734, #625 ) ) ; +#1288 = ORIENTED_EDGE ( 'NONE', *, *, #1236, .T. ) ; +#1289 = FACE_OUTER_BOUND ( 'NONE', #281, .T. ) ; +#1290 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, 3.750000000000000400 ) ) ; +#1291 = VECTOR ( 'NONE', #636, 1000.000000000000000 ) ; +#1292 = EDGE_CURVE ( 'NONE', #1316, #2150, #501, .T. ) ; +#1293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1294 = ORIENTED_EDGE ( 'NONE', *, *, #1277, .F. ) ; +#1295 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 19.99999999999999600, -6.249999999999997300 ) ) ; +#1296 = EDGE_CURVE ( 'NONE', #537, #1316, #1819, .T. ) ; +#1297 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 25.00000000000000000, -6.249999999999998200 ) ) ; +#1298 = CYLINDRICAL_SURFACE ( 'NONE', #305, 1.200000000000000600 ) ; +#1299 = DIRECTION ( 'NONE', ( -1.349229370204183400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1300 = VECTOR ( 'NONE', #849, 1000.000000000000000 ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 10.00000000000000200, 1.250000000000002200 ) ) ; +#1302 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1303 = FACE_OUTER_BOUND ( 'NONE', #2019, .T. ) ; +#1304 = EDGE_CURVE ( 'NONE', #63, #1347, #2227, .T. ) ; +#1305 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999784200, 24.00278602382929100, 5.473792144525598100 ) ) ; +#1306 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 14.56255668237038100, 6.250000000000000000 ) ) ; +#1308 = ORIENTED_EDGE ( 'NONE', *, *, #1309, .T. ) ; +#1309 = EDGE_CURVE ( 'NONE', #1010, #1905, #1645, .T. ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 19.99999999999999600, -6.250000000000001800 ) ) ; +#1311 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 0.0000000000000000000, 8.750000000000000000 ) ) ; +#1312 = ORIENTED_EDGE ( 'NONE', *, *, #1226, .T. ) ; +#1313 = ORIENTED_EDGE ( 'NONE', *, *, #1592, .T. ) ; +#1314 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 23.85600382682724400, 4.012891101701229400 ) ) ; +#1315 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 23.57196217300909100, 3.750000000000000400 ) ) ; +#1316 = VERTEX_POINT ( 'NONE', #82 ) ; +#1317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1318 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1513 ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999994700, -9.999999999999998200, -6.250000000000001800 ) ) ; +#1320 = VERTEX_POINT ( 'NONE', #1119 ) ; +#1321 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.12885731636642100, 6.050614974893605300 ) ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 3.750000000000000400 ) ) ; +#1323 = ORIENTED_EDGE ( 'NONE', *, *, #1883, .F. ) ; +#1324 = FACE_BOUND ( 'NONE', #1953, .T. ) ; +#1325 = CARTESIAN_POINT ( 'NONE', ( -5.805080124340773500, 22.07488783357080600, 3.967953894673157400 ) ) ; +#1326 = ORIENTED_EDGE ( 'NONE', *, *, #1744, .T. ) ; +#1327 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 30.00000000000000000, 1.250000000000001100 ) ) ; +#1328 = EDGE_CURVE ( 'NONE', #1648, #1412, #1725, .T. ) ; +#1329 = CARTESIAN_POINT ( 'NONE', ( 25.60550343351730300, 23.48428576781865500, 5.035564256087679900 ) ) ; +#1330 = APPROVAL_ROLE ( '' ) ; +#1331 = CIRCLE ( 'NONE', #315, 35.00000000000001400 ) ; +#1332 = EDGE_CURVE ( 'NONE', #1241, #518, #1521, .T. ) ; +#1333 = DIRECTION ( 'NONE', ( 6.419766481290786900E-032, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#1334 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999300, -8.700000000000002800 ) ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( 25.53383950614065900, 21.66768561103244300, 3.750000000000000400 ) ) ; +#1336 = LINE ( 'NONE', #2230, #506 ) ; +#1337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, -9.999999999999998200, -8.700000000000002800 ) ) ; +#1339 = CARTESIAN_POINT ( 'NONE', ( 25.55555555555555700, 23.85322457671660600, 6.250000000000000000 ) ) ; +#1340 = ADVANCED_FACE ( 'NONE', ( #1253 ), #1087, .F. ) ; +#1341 = CYLINDRICAL_SURFACE ( 'NONE', #98, 5.000000000000000900 ) ; +#1342 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1343 = EDGE_LOOP ( 'NONE', ( #1746, #1889, #1185, #2013 ) ) ; +#1344 = EDGE_CURVE ( 'NONE', #433, #63, #1382, .T. ) ; +#1345 = VERTEX_POINT ( 'NONE', #92 ) ; +#1346 = CARTESIAN_POINT ( 'NONE', ( -22.69174207655505500, -19.99999999999999600, 6.250000000000000000 ) ) ; +#1347 = VERTEX_POINT ( 'NONE', #1126 ) ; +#1348 = EDGE_CURVE ( 'NONE', #1265, #904, #209, .T. ) ; +#1349 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.30094986796454400, 4.605854837713068600 ) ) ; +#1350 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1351 = ORIENTED_EDGE ( 'NONE', *, *, #1197, .F. ) ; +#1352 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #2106 ) ) ; +#1353 = ORIENTED_EDGE ( 'NONE', *, *, #1081, .T. ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000002100, -7.499999999999996400, 6.250000000000000000 ) ) ; +#1355 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1356 = ORIENTED_EDGE ( 'NONE', *, *, #1404, .T. ) ; +#1357 = CIRCLE ( 'NONE', #619, 35.00000000000001400 ) ; +#1358 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 22.86738689204938200, 4.127749741612977800 ) ) ; +#1359 = ORIENTED_EDGE ( 'NONE', *, *, #1394, .T. ) ; +#1360 = ADVANCED_FACE ( 'NONE', ( #2114 ), #883, .F. ) ; +#1361 = EDGE_CURVE ( 'NONE', #1489, #1822, #32, .T. ) ; +#1362 = EDGE_CURVE ( 'NONE', #1267, #326, #44, .T. ) ; +#1363 = CARTESIAN_POINT ( 'NONE', ( 25.88586090223378000, 21.52921016782091700, 3.800472804293051800 ) ) ; +#1364 = FACE_OUTER_BOUND ( 'NONE', #235, .T. ) ; +#1365 = CC_DESIGN_SECURITY_CLASSIFICATION ( #1431, ( #1493 ) ) ; +#1366 = CIRCLE ( 'NONE', #1906, 5.000000000000000900 ) ; +#1367 = TOROIDAL_SURFACE ( 'NONE', #24, 32.50000000000001400, 2.500000000000000000 ) ; +#1368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1369 = CC_DESIGN_APPROVAL ( #1386, ( #1431 ) ) ; +#1370 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1371 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1372 = VERTEX_POINT ( 'NONE', #2075 ) ; +#1373 = CARTESIAN_POINT ( 'NONE', ( 26.00000000000000400, 20.78869031963129300, 3.750000000000000400 ) ) ; +#1374 = ORIENTED_EDGE ( 'NONE', *, *, #1252, .F. ) ; +#1375 = ORIENTED_EDGE ( 'NONE', *, *, #1673, .F. ) ; +#1376 = EDGE_CURVE ( 'NONE', #1822, #716, #1884, .T. ) ; +#1377 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.00000000000000000, -3.750000000000001800 ) ) ; +#1378 = VERTEX_POINT ( 'NONE', #292 ) ; +#1379 = EDGE_CURVE ( 'NONE', #419, #1976, #896, .T. ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( 25.73784580337592600, 22.53863796244548500, 4.180730668231611000 ) ) ; +#1381 = ORIENTED_EDGE ( 'NONE', *, *, #1058, .T. ) ; +#1382 = CIRCLE ( 'NONE', #219, 1.200000000000000600 ) ; +#1383 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000200, 6.250000000000000000 ) ) ; +#1384 = ADVANCED_FACE ( 'NONE', ( #61, #1063, #675 ), #2082, .F. ) ; +#1385 = ORIENTED_EDGE ( 'NONE', *, *, #1605, .T. ) ; +#1386 = APPROVAL ( #1901, 'UNSPECIFIED' ) ; +#1387 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 8.750000000000000000 ) ) ; +#1388 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1389 = VECTOR ( 'NONE', #1927, 1000.000000000000000 ) ; +#1390 = EDGE_CURVE ( 'NONE', #376, #1704, #1449, .T. ) ; +#1391 = LINE ( 'NONE', #1849, #1186 ) ; +#1392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1393 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 23.57196217300909100, 3.750000000000000400 ) ) ; +#1394 = EDGE_CURVE ( 'NONE', #1265, #514, #820, .T. ) ; +#1395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1396 = VECTOR ( 'NONE', #1040, 1000.000000000000000 ) ; +#1397 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #997, #614, ( #1431 ) ) ; +#1398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1399 = LINE ( 'NONE', #1377, #1903 ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( 3.385621722338496600, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1401 = ORIENTED_EDGE ( 'NONE', *, *, #983, .F. ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.250000000000001100 ) ) ; +#1403 = VERTEX_POINT ( 'NONE', #811 ) ; +#1404 = EDGE_CURVE ( 'NONE', #1320, #565, #152, .T. ) ; +#1405 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, 24.99999999999999300, -8.700000000000002800 ) ) ; +#1406 = ADVANCED_FACE ( 'NONE', ( #279 ), #217, .F. ) ; +#1407 = ORIENTED_EDGE ( 'NONE', *, *, #1619, .T. ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( 25.57158682918430500, 23.73406812504351400, 5.528324563767472300 ) ) ; +#1409 = EDGE_LOOP ( 'NONE', ( #1730, #833 ) ) ; +#1410 = EDGE_CURVE ( 'NONE', #1267, #648, #4, .T. ) ; +#1411 = CARTESIAN_POINT ( 'NONE', ( 41.31217441274566200, -20.00000000000000000, 4.059219374678103300 ) ) ; +#1412 = VERTEX_POINT ( 'NONE', #476 ) ; +#1413 = EDGE_CURVE ( 'NONE', #1980, #468, #936, .T. ) ; +#1414 = ORIENTED_EDGE ( 'NONE', *, *, #1122, .F. ) ; +#1415 = CIRCLE ( 'NONE', #655, 5.000000000000000000 ) ; +#1416 = ORIENTED_EDGE ( 'NONE', *, *, #1712, .T. ) ; +#1417 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #570, #1710, ( #1431 ) ) ; +#1418 = CARTESIAN_POINT ( 'NONE', ( -5.673546270554928700, 22.99238839682643500, 4.491767473091293500 ) ) ; +#1419 = ADVANCED_FACE ( 'NONE', ( #2253 ), #308, .F. ) ; +#1420 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 6.938893903907228400E-016 ) ) ; +#1421 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1422 = LOCAL_TIME ( 15, 7, 0.0000000000000000000, #1931 ) ; +#1423 = EDGE_CURVE ( 'NONE', #922, #1822, #1433, .T. ) ; +#1424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#1425 = VECTOR ( 'NONE', #486, 1000.000000000000000 ) ; +#1426 = EDGE_CURVE ( 'NONE', #610, #1976, #1964, .T. ) ; +#1427 = CARTESIAN_POINT ( 'NONE', ( 11.19796452725639700, 20.00000000000000000, 3.676173949593227500 ) ) ; +#1428 = FACE_OUTER_BOUND ( 'NONE', #1598, .T. ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.99999999999999600, 3.750000000000000000 ) ) ; +#1430 = ORIENTED_EDGE ( 'NONE', *, *, #1972, .F. ) ; +#1431 = SECURITY_CLASSIFICATION ( '', '', #444 ) ; +#1432 = ADVANCED_FACE ( 'NONE', ( #141 ), #449, .F. ) ; +#1433 = CIRCLE ( 'NONE', #149, 10.00000000000002500 ) ; +#1434 = ORIENTED_EDGE ( 'NONE', *, *, #1925, .F. ) ; +#1435 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 25.00000000000000000, -6.249999999999998200 ) ) ; +#1436 = EDGE_LOOP ( 'NONE', ( #703, #220 ) ) ; +#1437 = ORIENTED_EDGE ( 'NONE', *, *, #1046, .T. ) ; +#1438 = EDGE_CURVE ( 'NONE', #1175, #904, #1399, .T. ) ; +#1439 = CARTESIAN_POINT ( 'NONE', ( -22.69174207655505500, -19.99999999999999600, 3.750000000000000900 ) ) ; +#1440 = EDGE_LOOP ( 'NONE', ( #1173, #364, #888, #580, #271 ) ) ; +#1441 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1442 = EDGE_CURVE ( 'NONE', #191, #1265, #970, .T. ) ; +#1443 = ORIENTED_EDGE ( 'NONE', *, *, #913, .T. ) ; +#1444 = VECTOR ( 'NONE', #723, 1000.000000000000000 ) ; +#1445 = ADVANCED_FACE ( 'NONE', ( #912 ), #1341, .T. ) ; +#1446 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1050, #1523, ( #1493 ) ) ; +#1447 = LINE ( 'NONE', #1747, #2094 ) ; +#1448 = CARTESIAN_POINT ( 'NONE', ( -22.59995622936723300, -19.99999999999998900, 5.579372354866653600 ) ) ; +#1449 = LINE ( 'NONE', #129, #337 ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( -5.039490592989878300, 23.07507912907435400, 3.750000000000000400 ) ) ; +#1451 = FACE_BOUND ( 'NONE', #701, .T. ) ; +#1452 = CARTESIAN_POINT ( 'NONE', ( -20.17129038436223000, -19.99999999999999600, 3.750000000000000400 ) ) ; +#1453 = ADVANCED_FACE ( 'NONE', ( #47 ), #161, .F. ) ; +#1454 = FACE_OUTER_BOUND ( 'NONE', #1147, .T. ) ; +#1455 = EDGE_CURVE ( 'NONE', #1847, #2168, #860, .T. ) ; +#1456 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1457 = VECTOR ( 'NONE', #1567, 1000.000000000000000 ) ; +#1458 = EDGE_CURVE ( 'NONE', #648, #523, #1839, .T. ) ; +#1459 = ORIENTED_EDGE ( 'NONE', *, *, #1292, .F. ) ; +#1460 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1461 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1547, #276, ( #1493 ) ) ; +#1462 = ORIENTED_EDGE ( 'NONE', *, *, #1055, .T. ) ; +#1463 = EDGE_LOOP ( 'NONE', ( #1215, #722, #2012, #838 ) ) ; +#1464 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #36, #1257, #207, #1448, #377, #1637, #546, #1826, #715, #2006, #903, #2167, #1080, #43, #1264, #213, #1452, #382 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2.602085213965210600E-018, 0.0005073480468351823500, 0.001014696093670362100, 0.001522044140505541800, 0.002029392187340721600, 0.002536740234175901300, 0.003044088281011081100, 0.003551436327846260800, 0.004058784374681440600 ), + .UNSPECIFIED. ) ; +#1465 = ORIENTED_EDGE ( 'NONE', *, *, #1020, .F. ) ; +#1466 = ORIENTED_EDGE ( 'NONE', *, *, #1609, .T. ) ; +#1467 = EDGE_CURVE ( 'NONE', #945, #2144, #5, .T. ) ; +#1468 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1469 = ORIENTED_EDGE ( 'NONE', *, *, #861, .F. ) ; +#1470 = CIRCLE ( 'NONE', #643, 5.000000000000000900 ) ; +#1471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1472 = EDGE_CURVE ( 'NONE', #1529, #922, #639, .T. ) ; +#1473 = ORIENTED_EDGE ( 'NONE', *, *, #948, .T. ) ; +#1474 = CC_DESIGN_APPROVAL ( #1490, ( #1493 ) ) ; +#1475 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1476 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 30.00000000000000000, 1.250000000000001100 ) ) ; +#1477 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 6.250000000000000000 ) ) ; +#1478 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1479 = LINE ( 'NONE', #2109, #1425 ) ; +#1480 = EDGE_CURVE ( 'NONE', #2092, #142, #1053, .T. ) ; +#1481 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1482 = VECTOR ( 'NONE', #1702, 1000.000000000000000 ) ; +#1483 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.49999999999999600, 29.96320343559642300 ) ) ; +#1484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1485 = EDGE_CURVE ( 'NONE', #1905, #1175, #1275, .T. ) ; +#1486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 6.938893903907107100E-016, -1.000000000000000000 ) ) ; +#1487 = ORIENTED_EDGE ( 'NONE', *, *, #1309, .F. ) ; +#1488 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.349229370204183400E-016, 9.540486298584918500E-032 ) ) ; +#1489 = VERTEX_POINT ( 'NONE', #1224 ) ; +#1490 = APPROVAL ( #108, 'UNSPECIFIED' ) ; +#1491 = VERTEX_POINT ( 'NONE', #352 ) ; +#1492 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1493 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #2106, .NOT_KNOWN. ) ; +#1494 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999995600, -4.999999999999998200, -6.250000000000001800 ) ) ; +#1495 = ORIENTED_EDGE ( 'NONE', *, *, #1193, .T. ) ; +#1496 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1497 = DIRECTION ( 'NONE', ( 1.067350013832299500E-017, -0.08715574274765820800, -0.9961946980917455500 ) ) ; +#1498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1499 = ORIENTED_EDGE ( 'NONE', *, *, #1029, .T. ) ; +#1500 = CARTESIAN_POINT ( 'NONE', ( -5.579176504552099100, 23.67780986998315400, 5.389370785866873300 ) ) ; +#1501 = CIRCLE ( 'NONE', #623, 35.00000000000001400 ) ; +#1502 = EDGE_CURVE ( 'NONE', #2061, #191, #797, .T. ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( 45.00000000000002100, -7.499999999999996400, 8.750000000000000000 ) ) ; +#1504 = CARTESIAN_POINT ( 'NONE', ( 25.55555555555556100, 23.85322457671660600, 3.750000000000000900 ) ) ; +#1505 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1506 = EDGE_CURVE ( 'NONE', #326, #523, #2180, .T. ) ; +#1507 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -15.00000000000000000, -6.250000000000000900 ) ) ; +#1508 = LINE ( 'NONE', #100, #2155 ) ; +#1509 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 23.19481777352578100, 4.354610971802110000 ) ) ; +#1510 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #687, #1142, ( #1581 ) ) ; +#1511 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 8.750000000000000000 ) ) ; +#1512 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 30.00000000000001400, 42.34772228646442500 ) ) ; +#1513 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1514 = FACE_OUTER_BOUND ( 'NONE', #226, .T. ) ; +#1515 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1516 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1517 = CIRCLE ( 'NONE', #2157, 5.000000000000000000 ) ; +#1518 = EDGE_CURVE ( 'NONE', #986, #1175, #1721, .T. ) ; +#1519 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 22.43922785820051800, 3.055135452425506800 ) ) ; +#1520 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, 24.99999999999999300, -6.300000000000002500 ) ) ; +#1521 = LINE ( 'NONE', #1868, #2054 ) ; +#1522 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999994700, -9.999999999999998200, -6.250000000000001800 ) ) ; +#1523 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#1524 = ORIENTED_EDGE ( 'NONE', *, *, #1556, .T. ) ; +#1525 = EDGE_CURVE ( 'NONE', #1616, #1282, #350, .T. ) ; +#1526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1527 = VERTEX_POINT ( 'NONE', #754 ) ; +#1528 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #291, #2224, ( #1581 ) ) ; +#1529 = VERTEX_POINT ( 'NONE', #941 ) ; +#1530 = ADVANCED_FACE ( 'NONE', ( #1166 ), #232, .T. ) ; +#1531 = CARTESIAN_POINT ( 'NONE', ( 25.16317301622242700, 22.59200329373698000, 3.750000000000000000 ) ) ; +#1532 = ORIENTED_EDGE ( 'NONE', *, *, #1781, .F. ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999300, -7.500000000000003600 ) ) ; +#1534 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999957000, 24.12885731636599500, 6.050614974893703900 ) ) ; +#1535 = EDGE_LOOP ( 'NONE', ( #1213, #719, #1910, #1189, #1666, #1473, #116, #1312, #2214, #1065, #1703, #487, #1672, #1541, #870 ) ) ; +#1536 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1537 = ADVANCED_FACE ( 'NONE', ( #2137 ), #1614, .F. ) ; +#1538 = ORIENTED_EDGE ( 'NONE', *, *, #1957, .T. ) ; +#1539 = EDGE_CURVE ( 'NONE', #419, #2092, #2087, .T. ) ; +#1540 = DIRECTION ( 'NONE', ( 6.419766481290786900E-032, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#1541 = ORIENTED_EDGE ( 'NONE', *, *, #996, .F. ) ; +#1542 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.74903099319422100, 6.250000000000000000 ) ) ; +#1543 = EDGE_CURVE ( 'NONE', #1905, #2237, #735, .T. ) ; +#1544 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -19.99999999999999600, 8.750000000000000000 ) ) ; +#1545 = CARTESIAN_POINT ( 'NONE', ( 25.60199687381309300, 23.50997309779662100, 5.075610598720600400 ) ) ; +#1546 = EDGE_CURVE ( 'NONE', #904, #1704, #1103, .T. ) ; +#1547 = PERSON_AND_ORGANIZATION ( #1187, #2231 ) ; +#1548 = CC_DESIGN_APPROVAL ( #1565, ( #1581 ) ) ; +#1549 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.74903099319422100, 8.750000000000000000 ) ) ; +#1550 = ADVANCED_FACE ( 'NONE', ( #1054 ), #136, .F. ) ; +#1551 = VECTOR ( 'NONE', #310, 1000.000000000000000 ) ; +#1552 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, 5.000000000000000900, 3.750000000000043100 ) ) ; +#1553 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 23.09562110185092000, 3.387598678596062100 ) ) ; +#1554 = CIRCLE ( 'NONE', #48, 5.000000000000000900 ) ; +#1555 = ORIENTED_EDGE ( 'NONE', *, *, #1722, .F. ) ; +#1556 = EDGE_CURVE ( 'NONE', #805, #875, #577, .T. ) ; +#1557 = VERTEX_POINT ( 'NONE', #426 ) ; +#1558 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584918500E-032 ) ) ; +#1559 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976807100E-015, 12.50000000000000200, 1.250000000000002700 ) ) ; +#1560 = VECTOR ( 'NONE', #1112, 1000.000000000000000 ) ; +#1561 = ORIENTED_EDGE ( 'NONE', *, *, #1292, .T. ) ; +#1562 = EDGE_CURVE ( 'NONE', #2144, #329, #1993, .T. ) ; +#1563 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999999300, 21.13497622850691500, 3.692669077231422100 ) ) ; +#1564 = ORIENTED_EDGE ( 'NONE', *, *, #826, .T. ) ; +#1565 = APPROVAL ( #2060, 'UNSPECIFIED' ) ; +#1566 = VERTEX_POINT ( 'NONE', #2052 ) ; +#1567 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1568 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1569 = ORIENTED_EDGE ( 'NONE', *, *, #1458, .T. ) ; +#1570 = VECTOR ( 'NONE', #536, 1000.000000000000000 ) ; +#1571 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1572 = CARTESIAN_POINT ( 'NONE', ( -15.00000000000000000, -7.499999999999996400, 8.751025000000000300 ) ) ; +#1573 = EDGE_CURVE ( 'NONE', #1616, #1800, #1664, .T. ) ; +#1574 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -4.999999999999998200, -11.25000000000000000 ) ) ; +#1575 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 9.094669181828613900E-032 ) ) ; +#1576 = ADVANCED_FACE ( 'NONE', ( #1004 ), #609, .F. ) ; +#1577 = EDGE_CURVE ( 'NONE', #1010, #610, #1554, .T. ) ; +#1578 = CIRCLE ( 'NONE', #332, 1.000000000000000900 ) ; +#1579 = CARTESIAN_POINT ( 'NONE', ( 25.67354627055493300, 22.99238839682645600, 4.491767473091311300 ) ) ; +#1580 = LINE ( 'NONE', #109, #1194 ) ; +#1581 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #1493, #1739 ) ; +#1582 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1583 = CIRCLE ( 'NONE', #1769, 7.500000000000000000 ) ; +#1584 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1985, #688, #869, #2138, #1048, #14, #1231, #185, #1418, #358, #1615, #525, #1802, #696, #1989, #879 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.0005485918672765104500, 0.001097183734553019200, 0.001645775601829528000, 0.002194367469106036600, 0.002742959336382545200, 0.003291551203659054200, 0.004388734938212061900 ), + .UNSPECIFIED. ) ; +#1585 = CIRCLE ( 'NONE', #2165, 1.199999999999999700 ) ; +#1586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1587 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1588 = ORIENTED_EDGE ( 'NONE', *, *, #1854, .F. ) ; +#1589 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 15.00000000000000400, 1.250000000000003100 ) ) ; +#1590 = ADVANCED_FACE ( 'NONE', ( #75 ), #1870, .F. ) ; +#1591 = ORIENTED_EDGE ( 'NONE', *, *, #1090, .T. ) ; +#1592 = EDGE_CURVE ( 'NONE', #1527, #1696, #26, .T. ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 20.00000000000000000, 3.750000000000053700 ) ) ; +#1594 = EDGE_LOOP ( 'NONE', ( #724, #307, #1385, #683 ) ) ; +#1595 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#1596 = EDGE_CURVE ( 'NONE', #190, #922, #187, .T. ) ; +#1597 = ORIENTED_EDGE ( 'NONE', *, *, #907, .F. ) ; +#1598 = EDGE_LOOP ( 'NONE', ( #1171, #1495, #1796, #2223 ) ) ; +#1599 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1785, #606, ( #2106 ) ) ; +#1600 = ORIENTED_EDGE ( 'NONE', *, *, #1039, .F. ) ; +#1601 = LINE ( 'NONE', #1644, #1444 ) ; +#1602 = ADVANCED_FACE ( 'NONE', ( #1428 ), #1367, .T. ) ; +#1603 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1604 = VERTEX_POINT ( 'NONE', #2233 ) ; +#1605 = EDGE_CURVE ( 'NONE', #2162, #919, #2260, .T. ) ; +#1606 = CARTESIAN_POINT ( 'NONE', ( 25.55555555555556100, 23.85322457671660600, 6.063912805277814400 ) ) ; +#1607 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -4.999999999999998200, -6.250000000000001800 ) ) ; +#1608 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1609 = EDGE_CURVE ( 'NONE', #15, #1943, #480, .T. ) ; +#1610 = CARTESIAN_POINT ( 'NONE', ( 41.74123326523543700, -19.99999999999999300, 4.333629792367523800 ) ) ; +#1611 = VECTOR ( 'NONE', #1355, 1000.000000000000000 ) ; +#1612 = AXIS2_PLACEMENT_3D ( 'NONE', #2049, #422, #434 ) ; +#1613 = ADVANCED_FACE ( 'NONE', ( #411 ), #799, .F. ) ; +#1614 = CYLINDRICAL_SURFACE ( 'NONE', #59, 1.200000000000000600 ) ; +#1615 = CARTESIAN_POINT ( 'NONE', ( -5.737845803375934800, 22.53863796244546300, 4.180730668231601200 ) ) ; +#1616 = VERTEX_POINT ( 'NONE', #463 ) ; +#1617 = CARTESIAN_POINT ( 'NONE', ( 16.61437827766150500, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1618 = ORIENTED_EDGE ( 'NONE', *, *, #1728, .T. ) ; +#1619 = EDGE_CURVE ( 'NONE', #1282, #1529, #887, .T. ) ; +#1620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1621 = EDGE_LOOP ( 'NONE', ( #179, #1738, #214, #1434 ) ) ; +#1622 = CYLINDRICAL_SURFACE ( 'NONE', #638, 1.000000000000000000 ) ; +#1623 = EDGE_LOOP ( 'NONE', ( #1618, #314, #437, #396, #693, #1878, #2140, #542, #2101, #674, #1872 ) ) ; +#1624 = EDGE_CURVE ( 'NONE', #518, #986, #827, .T. ) ; +#1625 = ADVANCED_FACE ( 'NONE', ( #1303, #1758 ), #473, .F. ) ; +#1626 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 20.00000000000000000, 3.750000000000053700 ) ) ; +#1627 = EDGE_LOOP ( 'NONE', ( #2116, #1851, #668, #2218, #645 ) ) ; +#1628 = EDGE_LOOP ( 'NONE', ( #494, #771, #1060, #2188 ) ) ; +#1629 = CIRCLE ( 'NONE', #634, 1.000000000000000000 ) ; +#1630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1631 = FACE_OUTER_BOUND ( 'NONE', #1033, .T. ) ; +#1632 = ADVANCED_FACE ( 'NONE', ( #1814 ), #2160, .T. ) ; +#1633 = EDGE_CURVE ( 'NONE', #986, #329, #2204, .T. ) ; +#1634 = VECTOR ( 'NONE', #558, 1000.000000000000000 ) ; +#1635 = EDGE_CURVE ( 'NONE', #1822, #190, #322, .T. ) ; +#1636 = CIRCLE ( 'NONE', #2189, 2.062556682370380900 ) ; +#1637 = CARTESIAN_POINT ( 'NONE', ( -22.40238023923327400, -20.00000000000000000, 5.107263393478696400 ) ) ; +#1638 = ORIENTED_EDGE ( 'NONE', *, *, #1543, .T. ) ; +#1639 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 23.57196217300909100, 3.750000000000000400 ) ) ; +#1640 = ADVANCED_FACE ( 'NONE', ( #764 ), #1944, .F. ) ; +#1641 = EDGE_LOOP ( 'NONE', ( #359, #1561, #1846, #383, #1803 ) ) ; +#1642 = EDGE_LOOP ( 'NONE', ( #1294, #781, #1232, #562 ) ) ; +#1643 = EDGE_CURVE ( 'NONE', #421, #919, #2112, .T. ) ; +#1644 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999996400, 30.00000000000000000, 8.750000000000000000 ) ) ; +#1645 = LINE ( 'NONE', #746, #2141 ) ; +#1646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#1647 = EDGE_CURVE ( 'NONE', #1108, #1403, #261, .T. ) ; +#1648 = VERTEX_POINT ( 'NONE', #660 ) ; +#1649 = ORIENTED_EDGE ( 'NONE', *, *, #1348, .F. ) ; +#1650 = AXIS2_PLACEMENT_3D ( 'NONE', #939, #78, #1299 ) ; +#1651 = LINE ( 'NONE', #1439, #1570 ) ; +#1652 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999996400, 30.00000000000000000, 1.250000000000001100 ) ) ; +#1653 = ORIENTED_EDGE ( 'NONE', *, *, #1029, .F. ) ; +#1654 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000001800, -7.499999999999995600, 2.500000000000000400 ) ) ; +#1655 = EDGE_CURVE ( 'NONE', #1412, #2208, #1636, .T. ) ; +#1656 = LOCAL_TIME ( 15, 7, 0.0000000000000000000, #2134 ) ; +#1657 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1658 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1659 = VECTOR ( 'NONE', #138, 1000.000000000000000 ) ; +#1660 = EDGE_CURVE ( 'NONE', #151, #1378, #712, .T. ) ; +#1661 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #958, 'distance_accuracy_value', 'NONE'); +#1662 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 2.500000000000000400 ) ) ; +#1663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1664 = LINE ( 'NONE', #438, #531 ) ; +#1665 = EDGE_CURVE ( 'NONE', #900, #986, #664, .T. ) ; +#1666 = ORIENTED_EDGE ( 'NONE', *, *, #943, .T. ) ; +#1667 = AXIS2_PLACEMENT_3D ( 'NONE', #406, #1484, #72 ) ; +#1668 = CARTESIAN_POINT ( 'NONE', ( 26.00000000000000400, 24.74903099319422100, 3.750000000000000900 ) ) ; +#1669 = ORIENTED_EDGE ( 'NONE', *, *, #1390, .F. ) ; +#1670 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1671 = ORIENTED_EDGE ( 'NONE', *, *, #1760, .F. ) ; +#1672 = ORIENTED_EDGE ( 'NONE', *, *, #1197, .T. ) ; +#1673 = EDGE_CURVE ( 'NONE', #2143, #177, #1132, .T. ) ; +#1674 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#1675 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, -6.250000000000003600 ) ) ; +#1676 = PLANE ( 'NONE', #436 ) ; +#1677 = ORIENTED_EDGE ( 'NONE', *, *, #1182, .T. ) ; +#1678 = LINE ( 'NONE', #1818, #1745 ) ; +#1679 = EDGE_CURVE ( 'NONE', #1566, #238, #1585, .T. ) ; +#1680 = ORIENTED_EDGE ( 'NONE', *, *, #1779, .F. ) ; +#1681 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.74903099319422100, 6.250000000000000000 ) ) ; +#1682 = LINE ( 'NONE', #2215, #757 ) ; +#1683 = PLANE ( 'NONE', #405 ) ; +#1684 = FACE_OUTER_BOUND ( 'NONE', #680, .T. ) ; +#1685 = VECTOR ( 'NONE', #1850, 1000.000000000000000 ) ; +#1686 = EDGE_CURVE ( 'NONE', #57, #2208, #208, .T. ) ; +#1687 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.51990224755262200, 5.045119100709279700 ) ) ; +#1688 = VECTOR ( 'NONE', #489, 1000.000000000000000 ) ; +#1689 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -15.00000000000000000, -6.249999999999996400 ) ) ; +#1690 = EDGE_CURVE ( 'NONE', #1208, #464, #166, .T. ) ; +#1691 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1692 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1693 = ORIENTED_EDGE ( 'NONE', *, *, #1266, .F. ) ; +#1694 = AXIS2_PLACEMENT_3D ( 'NONE', #1668, #2193, #399 ) ; +#1695 = CARTESIAN_POINT ( 'NONE', ( -5.708761781436373400, 22.74268732516661000, 4.304822568508202000 ) ) ; +#1696 = VERTEX_POINT ( 'NONE', #2125 ) ; +#1697 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -9.999999999999998200, -6.300000000000002500 ) ) ; +#1698 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 12.50000000000000200, 8.750000000000000000 ) ) ; +#1699 = MECHANICAL_CONTEXT ( 'NONE', #1513, 'mechanical' ) ; +#1700 = ORIENTED_EDGE ( 'NONE', *, *, #1862, .F. ) ; +#1701 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999998200, -11.25000000000000000 ) ) ; +#1702 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1703 = ORIENTED_EDGE ( 'NONE', *, *, #1379, .T. ) ; +#1704 = VERTEX_POINT ( 'NONE', #335 ) ; +#1705 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 21.53743744007461200, 3.694547136201396900 ) ) ; +#1706 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.74903099319422100, 6.250000000000000000 ) ) ; +#1707 = EDGE_CURVE ( 'NONE', #2143, #1208, #106, .T. ) ; +#1708 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, -1.000000000000000000, 8.673617379884040400E-016 ) ) ; +#1709 = DIRECTION ( 'NONE', ( 6.419766481290786900E-032, -2.312964634635743000E-016, -1.000000000000000000 ) ) ; +#1710 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#1711 = ORIENTED_EDGE ( 'NONE', *, *, #1073, .T. ) ; +#1712 = EDGE_CURVE ( 'NONE', #2237, #1320, #1517, .T. ) ; +#1713 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000200, 1.250000000000002700 ) ) ; +#1714 = AXIS2_PLACEMENT_3D ( 'NONE', #1099, #2183, #736 ) ; +#1715 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1716 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.71981619856807600, 5.757959956295861700 ) ) ; +#1718 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 6.250000000000000000 ) ) ; +#1719 = LINE ( 'NONE', #795, #348 ) ; +#1720 = ADVANCED_FACE ( 'NONE', ( #1454 ), #46, .T. ) ; +#1721 = LINE ( 'NONE', #2139, #297 ) ; +#1722 = EDGE_CURVE ( 'NONE', #1566, #1943, #602, .T. ) ; +#1723 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -9.999999999999998200, -8.700000000000002800 ) ) ; +#1725 = LINE ( 'NONE', #1301, #1965 ) ; +#1726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1727 = ORIENTED_EDGE ( 'NONE', *, *, #1914, .F. ) ; +#1728 = EDGE_CURVE ( 'NONE', #177, #401, #551, .T. ) ; +#1729 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 23.61725360408984600, 4.779445314395213800 ) ) ; +#1730 = ORIENTED_EDGE ( 'NONE', *, *, #1027, .F. ) ; +#1731 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999300, -7.500000000000003600 ) ) ; +#1732 = ADVANCED_FACE ( 'NONE', ( #1900 ), #1838, .F. ) ; +#1733 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1661 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #958, #2213, #1133 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#1734 = ORIENTED_EDGE ( 'NONE', *, *, #1144, .F. ) ; +#1735 = CIRCLE ( 'NONE', #709, 1.199999999999999700 ) ; +#1736 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999998200, -7.499999999999996400, 8.751025000000000300 ) ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( 13.75000000000000200, -7.499999999999996400, 2.500000000000000400 ) ) ; +#1738 = ORIENTED_EDGE ( 'NONE', *, *, #902, .T. ) ; +#1739 = DESIGN_CONTEXT ( 'detailed design', #1896, 'design' ) ; +#1740 = CARTESIAN_POINT ( 'NONE', ( 25.73154659229291500, 22.58260139201405500, 4.205427626802953800 ) ) ; +#1741 = ORIENTED_EDGE ( 'NONE', *, *, #1941, .F. ) ; +#1742 = CARTESIAN_POINT ( 'NONE', ( 1.224646799147353500E-015, 20.00000000000000400, 1.250000000000003800 ) ) ; +#1743 = EDGE_LOOP ( 'NONE', ( #535, #1430, #212, #1115 ) ) ; +#1744 = EDGE_CURVE ( 'NONE', #738, #311, #447, .T. ) ; +#1745 = VECTOR ( 'NONE', #711, 1000.000000000000000 ) ; +#1746 = ORIENTED_EDGE ( 'NONE', *, *, #1001, .T. ) ; +#1747 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999995600, -4.999999999999998200, -11.25000000000000000 ) ) ; +#1748 = ADVANCED_FACE ( 'NONE', ( #910 ), #432, .F. ) ; +#1749 = EDGE_CURVE ( 'NONE', #367, #2168, #857, .T. ) ; +#1750 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1751 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 20.75326367093279600, 2.750135799300988700 ) ) ; +#1752 = AXIS2_PLACEMENT_3D ( 'NONE', #1842, #228, #2176 ) ; +#1753 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 8.750000000000000000 ) ) ; +#1754 = CIRCLE ( 'NONE', #357, 1.000000000000000000 ) ; +#1755 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 24.53614279367886300, 5.087307838785575200 ) ) ; +#1756 = FACE_OUTER_BOUND ( 'NONE', #1762, .T. ) ; +#1757 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1758 = FACE_BOUND ( 'NONE', #1436, .T. ) ; +#1759 = ADVANCED_FACE ( 'NONE', ( #2234 ), #1273, .T. ) ; +#1760 = EDGE_CURVE ( 'NONE', #1208, #367, #1336, .T. ) ; +#1761 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1762 = EDGE_LOOP ( 'NONE', ( #1532, #818, #306, #1776 ) ) ; +#1763 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999999100, 24.72188925874063900, 5.775753355572989600 ) ) ; +#1764 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, -9.999999999999998200, -6.300000000000002500 ) ) ; +#1765 = ORIENTED_EDGE ( 'NONE', *, *, #1041, .T. ) ; +#1766 = EDGE_CURVE ( 'NONE', #1943, #15, #388, .T. ) ; +#1767 = CARTESIAN_POINT ( 'NONE', ( 25.62036376374208800, 23.37570491204289200, 4.885961936538554300 ) ) ; +#1768 = EDGE_LOOP ( 'NONE', ( #1381, #748 ) ) ; +#1769 = AXIS2_PLACEMENT_3D ( 'NONE', #64, #1284, #234 ) ; +#1770 = ORIENTED_EDGE ( 'NONE', *, *, #880, .F. ) ; +#1771 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999996400, 30.00000000000000000, 1.250000000000001100 ) ) ; +#1772 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1773 = ADVANCED_FACE ( 'NONE', ( #1786, #793 ), #786, .F. ) ; +#1774 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1775 = VERTEX_POINT ( 'NONE', #2079 ) ; +#1776 = ORIENTED_EDGE ( 'NONE', *, *, #1647, .T. ) ; +#1777 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.349229370204183400E-016, -9.540486298584918500E-032 ) ) ; +#1778 = CIRCLE ( 'NONE', #717, 2.500000000000000000 ) ; +#1779 = EDGE_CURVE ( 'NONE', #1527, #376, #1719, .T. ) ; +#1780 = ORIENTED_EDGE ( 'NONE', *, *, #929, .T. ) ; +#1781 = EDGE_CURVE ( 'NONE', #738, #1403, #2177, .T. ) ; +#1782 = AXIS2_PLACEMENT_3D ( 'NONE', #1675, #579, #1865 ) ; +#1783 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1784 = ADVANCED_FACE ( 'NONE', ( #734 ), #295, .F. ) ; +#1785 = PERSON_AND_ORGANIZATION ( #1187, #2231 ) ; +#1786 = FACE_BOUND ( 'NONE', #2147, .T. ) ; +#1787 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 24.72188925874064600, 5.775753355572991400 ) ) ; +#1788 = VECTOR ( 'NONE', #2275, 1000.000000000000000 ) ; +#1789 = EDGE_CURVE ( 'NONE', #1847, #1010, #1165, .T. ) ; +#1790 = ORIENTED_EDGE ( 'NONE', *, *, #929, .F. ) ; +#1791 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1792 = ORIENTED_EDGE ( 'NONE', *, *, #790, .T. ) ; +#1793 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000001800, -3.749999999999996400 ) ) ; +#1794 = EDGE_CURVE ( 'NONE', #1011, #978, #2136, .T. ) ; +#1795 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1796 = ORIENTED_EDGE ( 'NONE', *, *, #1660, .F. ) ; +#1797 = CARTESIAN_POINT ( 'NONE', ( 42.10978329886248200, -19.99999999999999600, 4.685608443637549100 ) ) ; +#1798 = EDGE_CURVE ( 'NONE', #238, #15, #689, .T. ) ; +#1799 = ORIENTED_EDGE ( 'NONE', *, *, #747, .T. ) ; +#1800 = VERTEX_POINT ( 'NONE', #1552 ) ; +#1801 = AXIS2_PLACEMENT_3D ( 'NONE', #392, #1658, #566 ) ; +#1802 = CARTESIAN_POINT ( 'NONE', ( -5.810001478929120100, 22.04142831437582800, 3.956269916144795400 ) ) ; +#1803 = ORIENTED_EDGE ( 'NONE', *, *, #1707, .F. ) ; +#1804 = LINE ( 'NONE', #1429, #1827 ) ; +#1805 = ORIENTED_EDGE ( 'NONE', *, *, #773, .T. ) ; +#1806 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 8.750000000000000000 ) ) ; +#1807 = ADVANCED_FACE ( 'NONE', ( #1100 ), #470, .F. ) ; +#1808 = EDGE_CURVE ( 'NONE', #274, #1527, #186, .T. ) ; +#1809 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1810 = EDGE_CURVE ( 'NONE', #367, #177, #633, .T. ) ; +#1811 = LINE ( 'NONE', #1950, #1074 ) ; +#1812 = FACE_OUTER_BOUND ( 'NONE', #2031, .T. ) ; +#1813 = AXIS2_PLACEMENT_3D ( 'NONE', #1093, #55, #1276 ) ; +#1814 = FACE_OUTER_BOUND ( 'NONE', #768, .T. ) ; +#1815 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1816 = ORIENTED_EDGE ( 'NONE', *, *, #1362, .F. ) ; +#1817 = EDGE_CURVE ( 'NONE', #1403, #1108, #2084, .T. ) ; +#1818 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -19.99999999999999600, 8.750000000000000000 ) ) ; +#1819 = LINE ( 'NONE', #1295, #1560 ) ; +#1820 = ORIENTED_EDGE ( 'NONE', *, *, #1344, .T. ) ; +#1821 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1822 = VERTEX_POINT ( 'NONE', #1559 ) ; +#1823 = EDGE_CURVE ( 'NONE', #1696, #2237, #135, .T. ) ; +#1824 = AXIS2_PLACEMENT_3D ( 'NONE', #1402, #1603, #515 ) ; +#1825 = ORIENTED_EDGE ( 'NONE', *, *, #1410, .F. ) ; +#1826 = CARTESIAN_POINT ( 'NONE', ( -22.11182136808496400, -20.00000000000000000, 4.687821840458759000 ) ) ; +#1827 = VECTOR ( 'NONE', #25, 1000.000000000000000 ) ; +#1828 = ADVANCED_FACE ( 'NONE', ( #573 ), #529, .T. ) ; +#1829 = ORIENTED_EDGE ( 'NONE', *, *, #1679, .T. ) ; +#1830 = LINE ( 'NONE', #829, #742 ) ; +#1831 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1832 = ORIENTED_EDGE ( 'NONE', *, *, #1817, .T. ) ; +#1833 = EDGE_CURVE ( 'NONE', #2153, #2162, #2023, .T. ) ; +#1834 = EDGE_CURVE ( 'NONE', #850, #863, #1000, .T. ) ; +#1835 = CYLINDRICAL_SURFACE ( 'NONE', #666, 35.00000000000001400 ) ; +#1836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1837 = EDGE_CURVE ( 'NONE', #376, #398, #1479, .T. ) ; +#1838 = CYLINDRICAL_SURFACE ( 'NONE', #2104, 1.200000000000000600 ) ; +#1839 = CIRCLE ( 'NONE', #118, 3.750000000000000000 ) ; +#1840 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1841 = AXIS2_PLACEMENT_3D ( 'NONE', #1970, #856, #1395 ) ; +#1842 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 2.500000000000000400 ) ) ; +#1843 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 6.250000000000000000 ) ) ; +#1844 = ORIENTED_EDGE ( 'NONE', *, *, #1266, .T. ) ; +#1845 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, 22.50000000000000000, 1.250000000000001100 ) ) ; +#1846 = ORIENTED_EDGE ( 'NONE', *, *, #1274, .T. ) ; +#1847 = VERTEX_POINT ( 'NONE', #324 ) ; +#1848 = EDGE_CURVE ( 'NONE', #978, #1489, #478, .T. ) ; +#1849 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, -11.25000000000000400 ) ) ; +#1850 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1851 = ORIENTED_EDGE ( 'NONE', *, *, #1122, .T. ) ; +#1852 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1853 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 19.99999999999999600, -6.250000000000002700 ) ) ; +#1854 = EDGE_CURVE ( 'NONE', #311, #1108, #935, .T. ) ; +#1855 = ORIENTED_EDGE ( 'NONE', *, *, #963, .F. ) ; +#1856 = ORIENTED_EDGE ( 'NONE', *, *, #1647, .F. ) ; +#1857 = LINE ( 'NONE', #1806, #1922 ) ; +#1858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1859 = ORIENTED_EDGE ( 'NONE', *, *, #744, .F. ) ; +#1860 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.99999999999999600, 8.750000000000000000 ) ) ; +#1861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1862 = EDGE_CURVE ( 'NONE', #565, #1696, #73, .T. ) ; +#1863 = PLANE ( 'NONE', #555 ) ; +#1864 = FACE_OUTER_BOUND ( 'NONE', #1343, .T. ) ; +#1865 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1866 = LINE ( 'NONE', #333, #2258 ) ; +#1867 = EDGE_CURVE ( 'NONE', #2153, #421, #1366, .T. ) ; +#1868 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 3.750000000000000400 ) ) ; +#1869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.638349949533651400E-016 ) ) ; +#1870 = CONICAL_SURFACE ( 'NONE', #38, 2.500000000000000400, 0.08726646259971666800 ) ; +#1871 = AXIS2_PLACEMENT_3D ( 'NONE', #11, #685, #1420 ) ; +#1872 = ORIENTED_EDGE ( 'NONE', *, *, #1673, .T. ) ; +#1873 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, 3.750000000000000400 ) ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999997300, -7.499999999999995600, 8.750000000000000000 ) ) ; +#1875 = EDGE_LOOP ( 'NONE', ( #1313, #990, #119, #737, #1913, #456, #1669, #1680 ) ) ; +#1876 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 6.250000000000000000 ) ) ; +#1877 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000200, 1.250000000000002700 ) ) ; +#1878 = ORIENTED_EDGE ( 'NONE', *, *, #1472, .T. ) ; +#1879 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1880 = EDGE_LOOP ( 'NONE', ( #640, #1844, #1780, #2091, #1235 ) ) ; +#1881 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000106600, 23.73465942435600300, 4.940789280048560000 ) ) ; +#1882 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.22980869553963100, 4.446856941976241400 ) ) ; +#1883 = EDGE_CURVE ( 'NONE', #863, #2010, #1866, .T. ) ; +#1884 = CIRCLE ( 'NONE', #197, 10.00000000000002500 ) ; +#1885 = ORIENTED_EDGE ( 'NONE', *, *, #1834, .F. ) ; +#1886 = FACE_OUTER_BOUND ( 'NONE', #2248, .T. ) ; +#1887 = EDGE_CURVE ( 'NONE', #274, #398, #410, .T. ) ; +#1888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1889 = ORIENTED_EDGE ( 'NONE', *, *, #1163, .T. ) ; +#1890 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 23.30313388511094200, 3.526751595574405800 ) ) ; +#1891 = AXIS2_PLACEMENT_3D ( 'NONE', #341, #1595, #507 ) ; +#1892 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999999999999300, -6.300000000000002500 ) ) ; +#1893 = VECTOR ( 'NONE', #911, 1000.000000000000000 ) ; +#1894 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1895 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, -3.749999999999994700 ) ) ; +#1896 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1897 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1898 = EDGE_CURVE ( 'NONE', #716, #1011, #886, .T. ) ; +#1899 = CARTESIAN_POINT ( 'NONE', ( -5.943910863727846400, 21.14714372654804500, 3.747398801306810200 ) ) ; +#1900 = FACE_OUTER_BOUND ( 'NONE', #461, .T. ) ; +#1901 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1902 = EDGE_CURVE ( 'NONE', #1980, #1994, #825, .T. ) ; +#1903 = VECTOR ( 'NONE', #153, 1000.000000000000000 ) ; +#1904 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1905 = VERTEX_POINT ( 'NONE', #169 ) ; +#1906 = AXIS2_PLACEMENT_3D ( 'NONE', #502, #1774, #671 ) ; +#1907 = DIRECTION ( 'NONE', ( 4.898587196589413700E-017, 1.000000000000000000, 1.561251128379126400E-016 ) ) ; +#1908 = ORIENTED_EDGE ( 'NONE', *, *, #1001, .F. ) ; +#1909 = DIRECTION ( 'NONE', ( -1.349229370204183400E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1910 = ORIENTED_EDGE ( 'NONE', *, *, #933, .T. ) ; +#1911 = CARTESIAN_POINT ( 'NONE', ( 25.55855036785013100, 23.83087293116899000, 5.898542825961442300 ) ) ; +#1912 = ADVANCED_FACE ( 'NONE', ( #1756 ), #321, .F. ) ; +#1913 = ORIENTED_EDGE ( 'NONE', *, *, #1438, .T. ) ; +#1914 = EDGE_CURVE ( 'NONE', #2076, #1010, #759, .T. ) ; +#1915 = ORIENTED_EDGE ( 'NONE', *, *, #794, .T. ) ; +#1916 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1917 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 19.99999999999999600, -6.250000000000001800 ) ) ; +#1918 = ADVANCED_FACE ( 'NONE', ( #1812 ), #175, .T. ) ; +#1919 = EDGE_CURVE ( 'NONE', #13, #1038, #1196, .T. ) ; +#1920 = DIRECTION ( 'NONE', ( -1.387778780781445700E-016, -1.000000000000000000, -1.561251128379126400E-016 ) ) ; +#1921 = EDGE_LOOP ( 'NONE', ( #1323, #779, #1805, #353 ) ) ; +#1922 = VECTOR ( 'NONE', #188, 1000.000000000000000 ) ; +#1923 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 23.85600382682702000, 4.012891101701806700 ) ) ; +#1924 = ORIENTED_EDGE ( 'NONE', *, *, #1789, .F. ) ; +#1925 = EDGE_CURVE ( 'NONE', #875, #1980, #397, .T. ) ; +#1926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1927 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1928 = AXIS2_PLACEMENT_3D ( 'NONE', #1191, #1002, #1750 ) ; +#1929 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 23.93269559516790000, 4.064231586688976000 ) ) ; +#1930 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.156482317317871500E-016, 0.0000000000000000000 ) ) ; +#1931 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1932 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 22.32180904357775500, 3.876184244807676600 ) ) ; +#1933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1934 = ADVANCED_FACE ( 'NONE', ( #258 ), #663, .F. ) ; +#1935 = VECTOR ( 'NONE', #154, 1000.000000000000000 ) ; +#1936 = VECTOR ( 'NONE', #1536, 1000.000000000000000 ) ; +#1937 = EDGE_CURVE ( 'NONE', #916, #1529, #1170, .T. ) ; +#1938 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1939 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1940 = EDGE_LOOP ( 'NONE', ( #363, #123, #1741, #925, #1351, #490, #1924, #148, #484, #1671, #1949, #201, #199, #743 ) ) ; +#1941 = EDGE_CURVE ( 'NONE', #783, #945, #2159, .T. ) ; +#1942 = CARTESIAN_POINT ( 'NONE', ( 26.00434084566236200, 20.76092886199864300, 3.750096999500705900 ) ) ; +#1943 = VERTEX_POINT ( 'NONE', #699 ) ; +#1944 = PLANE ( 'NONE', #2200 ) ; +#1945 = AXIS2_PLACEMENT_3D ( 'NONE', #1017, #2265, #1198 ) ; +#1946 = EDGE_LOOP ( 'NONE', ( #750, #975, #1832, #1588 ) ) ; +#1947 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000000, 12.50000000000000200, 1.250000000000002700 ) ) ; +#1948 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1949 = ORIENTED_EDGE ( 'NONE', *, *, #1690, .T. ) ; +#1950 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 8.750000000000000000 ) ) ; +#1951 = ORIENTED_EDGE ( 'NONE', *, *, #1144, .T. ) ; +#1952 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, -3.749999999999994700 ) ) ; +#1953 = EDGE_LOOP ( 'NONE', ( #1499, #379 ) ) ; +#1954 = EDGE_CURVE ( 'NONE', #356, #2010, #1129, .T. ) ; +#1955 = FACE_OUTER_BOUND ( 'NONE', #840, .T. ) ; +#1956 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999999999999300, -7.500000000000003600 ) ) ; +#1957 = EDGE_CURVE ( 'NONE', #1038, #1847, #710, .T. ) ; +#1958 = AXIS2_PLACEMENT_3D ( 'NONE', #1205, #164, #1388 ) ; +#1959 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1960 = ADVANCED_FACE ( 'NONE', ( #2111 ), #1077, .F. ) ; +#1961 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999998200, -7.499999999999996400, 3.750000000000000400 ) ) ; +#1962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1963 = VECTOR ( 'NONE', #343, 1000.000000000000000 ) ; +#1964 = LINE ( 'NONE', #656, #1457 ) ; +#1965 = VECTOR ( 'NONE', #1497, 1000.000000000000000 ) ; +#1966 = EDGE_CURVE ( 'NONE', #1800, #1529, #1583, .T. ) ; +#1967 = CARTESIAN_POINT ( 'NONE', ( 8.803446514910255900, 20.00000000000000000, 3.676248207980351300 ) ) ; +#1968 = ORIENTED_EDGE ( 'NONE', *, *, #1455, .F. ) ; +#1969 = ADVANCED_FACE ( 'NONE', ( #205 ), #2005, .F. ) ; +#1970 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, -9.999999999999998200, -7.500000000000003600 ) ) ; +#1971 = ORIENTED_EDGE ( 'NONE', *, *, #1404, .F. ) ; +#1972 = EDGE_CURVE ( 'NONE', #783, #19, #163, .T. ) ; +#1973 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -9.999999999999994700, -6.249999999999999100 ) ) ; +#1974 = ORIENTED_EDGE ( 'NONE', *, *, #1633, .F. ) ; +#1975 = AXIS2_PLACEMENT_3D ( 'NONE', #131, #1930, #813 ) ; +#1976 = VERTEX_POINT ( 'NONE', #1860 ) ; +#1977 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.53614279367886300, 5.087307838785574400 ) ) ; +#1978 = CARTESIAN_POINT ( 'NONE', ( 40.34295374164852200, -19.99999999999999600, 3.749999999999999600 ) ) ; +#1979 = ORIENTED_EDGE ( 'NONE', *, *, #1941, .T. ) ; +#1980 = VERTEX_POINT ( 'NONE', #930 ) ; +#1981 = VECTOR ( 'NONE', #1481, 1000.000000000000000 ) ; +#1982 = ADVANCED_FACE ( 'NONE', ( #1514 ), #103, .F. ) ; +#1983 = EDGE_CURVE ( 'NONE', #1117, #1038, #549, .T. ) ; +#1984 = ORIENTED_EDGE ( 'NONE', *, *, #1426, .F. ) ; +#1985 = CARTESIAN_POINT ( 'NONE', ( -5.555555555555550000, 23.85322457671660600, 6.250000000000000000 ) ) ; +#1986 = CARTESIAN_POINT ( 'NONE', ( 42.40130541525925900, -19.99999999999999600, 5.105287461165716900 ) ) ; +#1987 = AXIS2_PLACEMENT_3D ( 'NONE', #1939, #822, #2100 ) ; +#1988 = LOCAL_TIME ( 15, 7, 0.0000000000000000000, #132 ) ; +#1989 = CARTESIAN_POINT ( 'NONE', ( -5.942853108624984100, 21.15441314109902700, 3.749999999999989300 ) ) ; +#1990 = VECTOR ( 'NONE', #2259, 1000.000000000000000 ) ; +#1991 = ADVANCED_FACE ( 'NONE', ( #599 ), #966, .T. ) ; +#1992 = CARTESIAN_POINT ( 'NONE', ( 15.60745475179851000, 20.00000000000000000, 1.895379710871625300 ) ) ; +#1993 = LINE ( 'NONE', #102, #1482 ) ; +#1994 = VERTEX_POINT ( 'NONE', #2034 ) ; +#1995 = ORIENTED_EDGE ( 'NONE', *, *, #1423, .T. ) ; +#1996 = ORIENTED_EDGE ( 'NONE', *, *, #777, .T. ) ; +#1997 = AXIS2_PLACEMENT_3D ( 'NONE', #1544, #1726, #629 ) ; +#1998 = EDGE_LOOP ( 'NONE', ( #2035, #2194 ) ) ; +#1999 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2000 = ADVANCED_FACE ( 'NONE', ( #1451, #1026 ), #1107, .F. ) ; +#2001 = EDGE_LOOP ( 'NONE', ( #1649, #1359, #1414, #533 ) ) ; +#2002 = CYLINDRICAL_SURFACE ( 'NONE', #670, 5.000000000000000900 ) ; +#2003 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 8.750000000000000000 ) ) ; +#2004 = FACE_OUTER_BOUND ( 'NONE', #1067, .T. ) ; +#2005 = CYLINDRICAL_SURFACE ( 'NONE', #1714, 3.750000000000000000 ) ; +#2006 = CARTESIAN_POINT ( 'NONE', ( -21.74379811620147900, -20.00000000000000000, 4.335743836217218900 ) ) ; +#2007 = VECTOR ( 'NONE', #1207, 1000.000000000000000 ) ; +#2008 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.99999999999999600, 8.750000000000000000 ) ) ; +#2009 = ORIENTED_EDGE ( 'NONE', *, *, #1240, .T. ) ; +#2010 = VERTEX_POINT ( 'NONE', #2199 ) ; +#2011 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 25.00000000000000000, -11.25000000000000400 ) ) ; +#2012 = ORIENTED_EDGE ( 'NONE', *, *, #1176, .F. ) ; +#2013 = ORIENTED_EDGE ( 'NONE', *, *, #1304, .F. ) ; +#2014 = AXIS2_PLACEMENT_3D ( 'NONE', #288, #621, #1909 ) ; +#2015 = ORIENTED_EDGE ( 'NONE', *, *, #1577, .T. ) ; +#2016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2017 = ORIENTED_EDGE ( 'NONE', *, *, #1156, .T. ) ; +#2018 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.156482317317871500E-016, 9.094669181828613900E-032 ) ) ; +#2019 = EDGE_LOOP ( 'NONE', ( #2128, #1138 ) ) ; +#2020 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2021 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999995600, -9.999999999999998200, -6.250000000000001800 ) ) ; +#2022 = APPROVAL_DATE_TIME ( #184, #1490 ) ; +#2023 = LINE ( 'NONE', #317, #1052 ) ; +#2024 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 19.99999999999999600, -3.749999999999996400 ) ) ; +#2025 = VECTOR ( 'NONE', #1692, 1000.000000000000000 ) ; +#2026 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#2027 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2028 = EDGE_LOOP ( 'NONE', ( #1401, #1984, #516, #1727 ) ) ; +#2029 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999300, -7.500000000000003600 ) ) ; +#2030 = ORIENTED_EDGE ( 'NONE', *, *, #1027, .T. ) ; +#2031 = EDGE_LOOP ( 'NONE', ( #1951, #1218, #2017, #1979 ) ) ; +#2032 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2033 = LINE ( 'NONE', #1853, #1234 ) ; +#2034 = CARTESIAN_POINT ( 'NONE', ( 42.69174207655505900, -19.99999999999999600, 8.750000000000000000 ) ) ; +#2035 = ORIENTED_EDGE ( 'NONE', *, *, #1020, .T. ) ; +#2036 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.541976423090495400E-016 ) ) ; +#2037 = ORIENTED_EDGE ( 'NONE', *, *, #1817, .F. ) ; +#2038 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .F. ) ; +#2039 = AXIS2_PLACEMENT_3D ( 'NONE', #605, #275, #613 ) ; +#2040 = FACE_OUTER_BOUND ( 'NONE', #249, .T. ) ; +#2041 = PLANE ( 'NONE', #528 ) ; +#2042 = VERTEX_POINT ( 'NONE', #250 ) ; +#2043 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999996400, 30.00000000000000000, 8.750000000000000000 ) ) ; +#2044 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2045 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, -15.00000000000000000, -3.750000000000001800 ) ) ; +#2046 = CARTESIAN_POINT ( 'NONE', ( -5.616002306048608600, 23.40748154192208500, 4.927631649699583800 ) ) ; +#2047 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, -4.999999999999998200, -3.750000000000000400 ) ) ; +#2048 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2049 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2050 = DIRECTION ( 'NONE', ( -2.312964634635743000E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2051 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -6.250000000000001800 ) ) ; +#2052 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.99999999999999300, -8.700000000000002800 ) ) ; +#2053 = VECTOR ( 'NONE', #157, 1000.000000000000000 ) ; +#2054 = VECTOR ( 'NONE', #417, 1000.000000000000000 ) ; +#2055 = AXIS2_PLACEMENT_3D ( 'NONE', #1533, #451, #1715 ) ; +#2056 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000212300, 22.68881179899420500, 4.030841989377757200 ) ) ; +#2057 = CARTESIAN_POINT ( 'NONE', ( 1.224646799147353500E-015, 20.00000000000000400, 1.250000000000003800 ) ) ; +#2058 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2059 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999993800, -9.999999999999998200, -7.500000000000003600 ) ) ; +#2060 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#2061 = VERTEX_POINT ( 'NONE', #1494 ) ; +#2062 = ORIENTED_EDGE ( 'NONE', *, *, #1485, .F. ) ; +#2063 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.561251128379126400E-016, -1.000000000000000000 ) ) ; +#2064 = ORIENTED_EDGE ( 'NONE', *, *, #1966, .T. ) ; +#2065 = FACE_OUTER_BOUND ( 'NONE', #866, .T. ) ; +#2066 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 21.24603006199837900, 2.746358506781609400 ) ) ; +#2067 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2068 = ORIENTED_EDGE ( 'NONE', *, *, #1605, .F. ) ; +#2069 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.561251128379126400E-016, 1.000000000000000000 ) ) ; +#2070 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2071 = ORIENTED_EDGE ( 'NONE', *, *, #1983, .T. ) ; +#2072 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -14.99999999999998600, 42.34772228646443900 ) ) ; +#2073 = ORIENTED_EDGE ( 'NONE', *, *, #1104, .T. ) ; +#2074 = VECTOR ( 'NONE', #285, 1000.000000000000000 ) ; +#2075 = CARTESIAN_POINT ( 'NONE', ( 25.55555555555555700, 23.85322457671660600, 6.250000000000000000 ) ) ; +#2076 = VERTEX_POINT ( 'NONE', #587 ) ; +#2077 = AXIS2_PLACEMENT_3D ( 'NONE', #1895, #1141, #107 ) ; +#2078 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 23.57196217300909100, 3.750000000000000400 ) ) ; +#2079 = CARTESIAN_POINT ( 'NONE', ( -5.555555555555550000, 23.85322457671660600, 6.250000000000000000 ) ) ; +#2080 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999957400, 24.00278602382846000, 5.473792144525789100 ) ) ; +#2081 = APPROVAL_PERSON_ORGANIZATION ( #230, #1490, #1330 ) ; +#2082 = PLANE ( 'NONE', #172 ) ; +#2083 = CARTESIAN_POINT ( 'NONE', ( 13.75000000000000200, -7.499999999999996400, 8.750000000000000000 ) ) ; +#2084 = CIRCLE ( 'NONE', #1987, 1.199999999999999700 ) ; +#2085 = CARTESIAN_POINT ( 'NONE', ( 23.39411254969542500, 24.99999999999999300, -6.300000000000002500 ) ) ; +#2086 = CARTESIAN_POINT ( 'NONE', ( 25.64902325887283000, 23.16833770492798500, 4.652065073599295000 ) ) ; +#2087 = LINE ( 'NONE', #763, #692 ) ; +#2088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2089 = VERTEX_POINT ( 'NONE', #414 ) ; +#2090 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2091 = ORIENTED_EDGE ( 'NONE', *, *, #1728, .F. ) ; +#2092 = VERTEX_POINT ( 'NONE', #1681 ) ; +#2093 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 22.43922785820108200, 3.055135452425571600 ) ) ; +#2094 = VECTOR ( 'NONE', #2099, 1000.000000000000000 ) ; +#2095 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2096 = ORIENTED_EDGE ( 'NONE', *, *, #1263, .T. ) ; +#2097 = ORIENTED_EDGE ( 'NONE', *, *, #1226, .F. ) ; +#2098 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 0.0000000000000000000, 8.750000000000000000 ) ) ; +#2099 = DIRECTION ( 'NONE', ( 9.540486298584918500E-032, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2101 = ORIENTED_EDGE ( 'NONE', *, *, #1296, .T. ) ; +#2102 = LINE ( 'NONE', #1199, #1981 ) ; +#2103 = ORIENTED_EDGE ( 'NONE', *, *, #810, .T. ) ; +#2104 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #517, #1791 ) ; +#2105 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 19.99999999999999600, -11.25000000000000400 ) ) ; +#2106 = PRODUCT ( 'Front_Block', 'Front_Block', '', ( #1699 ) ) ; +#2107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.517883041479702500E-016 ) ) ; +#2108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2109 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000002500, -3.749999999999996400 ) ) ; +#2110 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2111 = FACE_OUTER_BOUND ( 'NONE', #836, .T. ) ; +#2112 = LINE ( 'NONE', #1572, #1688 ) ; +#2113 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, -6.250000000000001800 ) ) ; +#2114 = FACE_OUTER_BOUND ( 'NONE', #676, .T. ) ; +#2115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2116 = ORIENTED_EDGE ( 'NONE', *, *, #1390, .T. ) ; +#2117 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2118 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2119 = AXIS2_PLACEMENT_3D ( 'NONE', #510, #1783, #1398 ) ; +#2120 = ORIENTED_EDGE ( 'NONE', *, *, #1348, .T. ) ; +#2121 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2122 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2123 = EDGE_LOOP ( 'NONE', ( #698, #1036, #2071, #1538, #111, #1308, #1638, #1416, #2103, #452 ) ) ; +#2124 = ORIENTED_EDGE ( 'NONE', *, *, #933, .F. ) ; +#2125 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, -14.99999999999999600, -6.249999999999984900 ) ) ; +#2126 = EDGE_LOOP ( 'NONE', ( #2217, #1375, #173, #126 ) ) ; +#2127 = CARTESIAN_POINT ( 'NONE', ( 7.066453820479402700, 20.00000000000000000, 3.212204203954756500 ) ) ; +#2128 = ORIENTED_EDGE ( 'NONE', *, *, #1068, .T. ) ; +#2129 = LINE ( 'NONE', #999, #1037 ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, -3.749999999999994700 ) ) ; +#2131 = VERTEX_POINT ( 'NONE', #946 ) ; +#2132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2133 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 23.93269559516790000, 4.064231586688975100 ) ) ; +#2134 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#2135 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2136 = LINE ( 'NONE', #804, #231 ) ; +#2137 = FACE_OUTER_BOUND ( 'NONE', #336, .T. ) ; +#2138 = CARTESIAN_POINT ( 'NONE', ( -5.571586829184305100, 23.73406812504350300, 5.528324563767459800 ) ) ; +#2139 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 30.00000000000000000, 3.750000000000004900 ) ) ; +#2140 = ORIENTED_EDGE ( 'NONE', *, *, #1596, .F. ) ; +#2141 = VECTOR ( 'NONE', #236, 1000.000000000000000 ) ; +#2142 = CARTESIAN_POINT ( 'NONE', ( 42.59834862737886100, -19.99999999999999300, 5.573744932078438900 ) ) ; +#2143 = VERTEX_POINT ( 'NONE', #758 ) ; +#2144 = VERTEX_POINT ( 'NONE', #2043 ) ; +#2145 = AXIS2_PLACEMENT_3D ( 'NONE', #2059, #964, #2222 ) ; +#2146 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.373322751814975100E-016, 1.250000000000000700 ) ) ; +#2147 = EDGE_LOOP ( 'NONE', ( #404, #1829 ) ) ; +#2148 = CARTESIAN_POINT ( 'NONE', ( 14.03797709531682600, 19.99999999999999600, 2.746645477144237000 ) ) ; +#2149 = ORIENTED_EDGE ( 'NONE', *, *, #967, .T. ) ; +#2150 = VERTEX_POINT ( 'NONE', #751 ) ; +#2151 = PLANE ( 'NONE', #658 ) ; +#2152 = FACE_OUTER_BOUND ( 'NONE', #1135, .T. ) ; +#2153 = VERTEX_POINT ( 'NONE', #1874 ) ; +#2154 = CARTESIAN_POINT ( 'NONE', ( -5.999999999999994700, 24.74903099319421800, 6.250000000000000000 ) ) ; +#2155 = VECTOR ( 'NONE', #778, 1000.000000000000000 ) ; +#2156 = CARTESIAN_POINT ( 'NONE', ( -5.999999999999998200, 24.74903099319422100, 3.750000000000000900 ) ) ; +#2157 = AXIS2_PLACEMENT_3D ( 'NONE', #1973, #858, #2132 ) ; +#2158 = LINE ( 'NONE', #1154, #320 ) ; +#2159 = LINE ( 'NONE', #534, #1634 ) ; +#2160 = CYLINDRICAL_SURFACE ( 'NONE', #2220, 4.999999999999999100 ) ; +#2161 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 2.308220447633426100E-016, 1.000000000000000000 ) ) ; +#2162 = VERTEX_POINT ( 'NONE', #89 ) ; +#2163 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2164 = ORIENTED_EDGE ( 'NONE', *, *, #913, .F. ) ; +#2165 = AXIS2_PLACEMENT_3D ( 'NONE', #505, #1777, #673 ) ; +#2166 = ORIENTED_EDGE ( 'NONE', *, *, #1665, .F. ) ; +#2167 = CARTESIAN_POINT ( 'NONE', ( -21.31274531696697500, -20.00000000000000000, 4.059419084955396600 ) ) ; +#2168 = VERTEX_POINT ( 'NONE', #1124 ) ; +#2169 = ORIENTED_EDGE ( 'NONE', *, *, #1596, .T. ) ; +#2170 = ORIENTED_EDGE ( 'NONE', *, *, #1902, .F. ) ; +#2171 = ORIENTED_EDGE ( 'NONE', *, *, #1410, .T. ) ; +#2172 = CIRCLE ( 'NONE', #237, 1.843835023555569200 ) ; +#2173 = LOCAL_TIME ( 15, 7, 0.0000000000000000000, #346 ) ; +#2174 = CARTESIAN_POINT ( 'NONE', ( -5.999999999999998200, 24.74903099319422100, 8.750000000000000000 ) ) ; +#2175 = AXIS2_PLACEMENT_3D ( 'NONE', #665, #1959, #841 ) ; +#2176 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2177 = LINE ( 'NONE', #1338, #294 ) ; +#2178 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2179 = PLANE ( 'NONE', #246 ) ; +#2180 = LINE ( 'NONE', #690, #1228 ) ; +#2181 = EDGE_LOOP ( 'NONE', ( #1885, #2186 ) ) ; +#2182 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2183 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2184 = VERTEX_POINT ( 'NONE', #2206 ) ; +#2185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2186 = ORIENTED_EDGE ( 'NONE', *, *, #1281, .F. ) ; +#2187 = CYLINDRICAL_SURFACE ( 'NONE', #681, 1.200000000000000600 ) ; +#2188 = ORIENTED_EDGE ( 'NONE', *, *, #1779, .T. ) ; +#2189 = AXIS2_PLACEMENT_3D ( 'NONE', #1383, #327, #1582 ) ; +#2190 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 30.00000000000000000, 8.750000000000000000 ) ) ; +#2191 = VERTEX_POINT ( 'NONE', #1503 ) ; +#2192 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 24.99999999999999600, 8.750000000000000000 ) ) ; +#2193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2194 = ORIENTED_EDGE ( 'NONE', *, *, #1867, .T. ) ; +#2195 = LINE ( 'NONE', #662, #2074 ) ; +#2196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2197 = ORIENTED_EDGE ( 'NONE', *, *, #1635, .F. ) ; +#2198 = DIRECTION ( 'NONE', ( -2.312964634635743000E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2199 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999999999999300, -8.700000000000002800 ) ) ; +#2200 = AXIS2_PLACEMENT_3D ( 'NONE', #2105, #2261, #1192 ) ; +#2201 = VECTOR ( 'NONE', #1962, 1000.000000000000000 ) ; +#2202 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1373, #832, #2266, #1200, #156, #1380, #325, #1579, #496, #1767, #1329, #180, #1408, #351, #1606, #519 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001100721347373602400, 0.001651082021060398800, 0.002201442694747195200, 0.002751803368433991800, 0.003302164042120788000, 0.003852524715807584600, 0.004402885389494380800 ), + .UNSPECIFIED. ) ; +#2203 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000209600, 24.10298550741245900, 5.854904615843636000 ) ) ; +#2204 = LINE ( 'NONE', #1753, #1251 ) ; +#2205 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2206 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, 22.50000000000000000, 8.750000000000000000 ) ) ; +#2207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.312964634635743000E-016, 1.000000000000000000 ) ) ; +#2208 = VERTEX_POINT ( 'NONE', #1307 ) ; +#2209 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.16733232262333400, 4.398684310916815200 ) ) ; +#2210 = DIRECTION ( 'NONE', ( -9.094669181828613900E-032, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2211 = ORIENTED_EDGE ( 'NONE', *, *, #1214, .F. ) ; +#2212 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 30.00000000000000400, -3.749999999999996400 ) ) ; +#2213 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#2214 = ORIENTED_EDGE ( 'NONE', *, *, #963, .T. ) ; +#2215 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999997300, 22.50000000000000000, 1.250000000000001100 ) ) ; +#2216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2217 = ORIENTED_EDGE ( 'NONE', *, *, #1810, .T. ) ; +#2218 = ORIENTED_EDGE ( 'NONE', *, *, #830, .F. ) ; +#2219 = CARTESIAN_POINT ( 'NONE', ( -5.779628109085025200, 22.24926692502615600, 4.037538771082322100 ) ) ; +#2220 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #1184, #2247 ) ; +#2221 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, 22.50000000000000000, 1.250000000000001100 ) ) ; +#2222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2223 = ORIENTED_EDGE ( 'NONE', *, *, #917, .F. ) ; +#2224 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#2225 = FACE_OUTER_BOUND ( 'NONE', #1535, .T. ) ; +#2226 = ORIENTED_EDGE ( 'NONE', *, *, #1925, .T. ) ; +#2227 = LINE ( 'NONE', #582, #81 ) ; +#2228 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 20.76096228047385500, 3.754456601096904000 ) ) ; +#2229 = CARTESIAN_POINT ( 'NONE', ( 19.99999999999999600, 19.99999999999999600, -11.25000000000000400 ) ) ; +#2230 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 30.00000000000000400, -3.749999999999996400 ) ) ; +#2231 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#2232 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2233 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 24.74903099319422100, 8.750000000000000000 ) ) ; +#2234 = FACE_OUTER_BOUND ( 'NONE', #1056, .T. ) ; +#2235 = VECTOR ( 'NONE', #1795, 1000.000000000000000 ) ; +#2236 = CARTESIAN_POINT ( 'NONE', ( 10.00000000000000200, -7.499999999999996400, 2.500000000000000400 ) ) ; +#2237 = VERTEX_POINT ( 'NONE', #1689 ) ; +#2238 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, 24.51990224755227400, 5.045119100709741600 ) ) ; +#2239 = ORIENTED_EDGE ( 'NONE', *, *, #1643, .T. ) ; +#2240 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 30.00000000000000000, -3.749999999999994700 ) ) ; +#2241 = ORIENTED_EDGE ( 'NONE', *, *, #1376, .T. ) ; +#2242 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2243 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 30.00000000000000700, -6.249999999999984900 ) ) ; +#2244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, 23.19481777352561000, 4.354610971802805400 ) ) ; +#2246 = ORIENTED_EDGE ( 'NONE', *, *, #1848, .T. ) ; +#2247 = DIRECTION ( 'NONE', ( 3.469446951953614700E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2248 = EDGE_LOOP ( 'NONE', ( #241, #1462, #2097, #2170 ) ) ; +#2249 = LINE ( 'NONE', #112, #435 ) ; +#2250 = VERTEX_POINT ( 'NONE', #593 ) ; +#2251 = AXIS2_PLACEMENT_3D ( 'NONE', #1174, #2095, #1005 ) ; +#2252 = DIRECTION ( 'NONE', ( 8.659560562354889700E-017, -0.7071067811865434600, -0.7071067811865516800 ) ) ; +#2253 = FACE_OUTER_BOUND ( 'NONE', #1152, .T. ) ; +#2254 = CARTESIAN_POINT ( 'NONE', ( 25.80508012434037500, 22.07488783357142400, 3.967953894673321300 ) ) ; +#2255 = CIRCLE ( 'NONE', #344, 5.000000000000005300 ) ; +#2256 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2258 = VECTOR ( 'NONE', #1587, 1000.000000000000000 ) ; +#2259 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.856086604230691600E-047, 8.024708101613483100E-032 ) ) ; +#2260 = CIRCLE ( 'NONE', #28, 5.000000000000000900 ) ; +#2261 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -2.308220447633426100E-016 ) ) ; +#2262 = AXIS2_PLACEMENT_3D ( 'NONE', #834, #2110, #1022 ) ; +#2263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 6.938893903907228400E-016 ) ) ; +#2264 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 24.99999999999999300, -7.500000000000003600 ) ) ; +#2265 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2266 = CARTESIAN_POINT ( 'NONE', ( 25.88798075869178900, 21.51537530752663200, 3.799409044492050700 ) ) ; +#2267 = ORIENTED_EDGE ( 'NONE', *, *, #902, .F. ) ; +#2268 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2269 = EDGE_LOOP ( 'NONE', ( #727, #268, #1792, #300, #244 ) ) ; +#2270 = FACE_OUTER_BOUND ( 'NONE', #1946, .T. ) ; +#2271 = ORIENTED_EDGE ( 'NONE', *, *, #1502, .T. ) ; +#2272 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 20.00000000000000400, -3.749999999999996400 ) ) ; +#2273 = CIRCLE ( 'NONE', #733, 1.199999999999999700 ) ; +#2274 = ORIENTED_EDGE ( 'NONE', *, *, #810, .F. ) ; +#2275 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Hammer_Slide.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Hammer_Slide.step new file mode 100644 index 0000000..55d115f --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Hammer_Slide.step @@ -0,0 +1,6623 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Hammer_Slide.STEP', + '2013-11-14T05:06:45', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CIRCLE ( 'NONE', #4515, 101.0000000000000000 ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( 0.4039045983049319200, 5.000000000027274200, 17.99271596417261800 ) ) ; +#3 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766148800, 12.18129507813263500, -62.96121213358091500 ) ) ; +#5 = FACE_OUTER_BOUND ( 'NONE', #1820, .T. ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333330800, 6.764070245727474200, 1.812427159890015200 ) ) ; +#7 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.709269841782313100, 16.93242356500261900 ) ) ; +#9 = VECTOR ( 'NONE', #1003, 1000.000000000000000 ) ; +#10 = ADVANCED_FACE ( 'NONE', ( #4357 ), #5118, .T. ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000400, -1.457153238772571000, 17.50000000000000000 ) ) ; +#12 = AXIS2_PLACEMENT_3D ( 'NONE', #4580, #2148, #4971 ) ; +#13 = ORIENTED_EDGE ( 'NONE', *, *, #3439, .T. ) ; +#14 = EDGE_CURVE ( 'NONE', #4554, #547, #2178, .T. ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 18.42005639222160300, 14.45341357385468200, -25.36671148611454300 ) ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, -1.457153238772569400, 17.50000000000000000 ) ) ; +#17 = EDGE_CURVE ( 'NONE', #2914, #599, #3276, .T. ) ; +#18 = EDGE_LOOP ( 'NONE', ( #2537, #981, #1636, #237 ) ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( 10.65674227075124100, 14.86909375811023000, -66.58122624507952000 ) ) ; +#20 = ORIENTED_EDGE ( 'NONE', *, *, #4257, .F. ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( 13.09869778355463400, 11.40702297542857800, -62.48407121623822700 ) ) ; +#22 = DIRECTION ( 'NONE', ( -0.6131176017962922700, 0.0000000000000000000, -0.7899916495555905400 ) ) ; +#23 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.000000000000005300, 15.06074904382838400 ) ) ; +#24 = AXIS2_PLACEMENT_3D ( 'NONE', #4278, #1841, #4673 ) ; +#25 = ORIENTED_EDGE ( 'NONE', *, *, #295, .T. ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( 17.10309148022363600, -0.7040974145761350600, -25.10892480948282200 ) ) ; +#27 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#28 = ORIENTED_EDGE ( 'NONE', *, *, #4837, .T. ) ; +#29 = VERTEX_POINT ( 'NONE', #4653 ) ; +#30 = ORIENTED_EDGE ( 'NONE', *, *, #2606, .T. ) ; +#31 = AXIS2_PLACEMENT_3D ( 'NONE', #543, #3403, #963 ) ; +#32 = CARTESIAN_POINT ( 'NONE', ( -0.05080000000000158000, 12.93424423647691800, -28.10801246388828600 ) ) ; +#33 = ADVANCED_FACE ( 'NONE', ( #4218 ), #5161, .F. ) ; +#34 = ORIENTED_EDGE ( 'NONE', *, *, #3340, .T. ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( 6.423591906362038800, 13.83277906371842100, -65.77732840549322200 ) ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( 13.20477646203840600, 13.97429252708382400, -65.90961197034553700 ) ) ; +#37 = LINE ( 'NONE', #3775, #2093 ) ; +#38 = DIRECTION ( 'NONE', ( -1.422240424502908100E-014, -0.3451738168724904900, 0.9385387771134853200 ) ) ; +#39 = ORIENTED_EDGE ( 'NONE', *, *, #4406, .T. ) ; +#40 = ORIENTED_EDGE ( 'NONE', *, *, #4219, .T. ) ; +#41 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#42 = LINE ( 'NONE', #4354, #4255 ) ; +#43 = ORIENTED_EDGE ( 'NONE', *, *, #2204, .T. ) ; +#44 = EDGE_CURVE ( 'NONE', #5236, #1527, #2065, .T. ) ; +#45 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2161, #936, #2572 ), + ( #120, #2966, #535 ), + ( #3390, #952, #3805 ), + ( #1373, #4208, #1768 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.005741328797337470800, 0.006770344493608243000 ), + ( 0.0000000000000000000, 0.5290744576419276200 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8488195431663911900, 0.8576105227433832300), + ( 1.000000000000000000, 0.8498146481094818200, 0.8585477634134395200), + ( 1.000000000000000000, 0.8496155848129218800, 0.8583602754316472800), + ( 1.000000000000000000, 0.8482294836686508100, 0.8570547745653893700) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#46 = ORIENTED_EDGE ( 'NONE', *, *, #3786, .F. ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 22.10405866709379900, -56.53666528814581900 ) ) ; +#48 = AXIS2_PLACEMENT_3D ( 'NONE', #1942, #4778, #2356 ) ; +#49 = EDGE_CURVE ( 'NONE', #4740, #2104, #1110, .T. ) ; +#50 = CONICAL_SURFACE ( 'NONE', #1929, 4.999999999999998200, 0.7853981633974437300 ) ; +#51 = CARTESIAN_POINT ( 'NONE', ( 10.85944977504207300, 15.48669584313965300, -62.02175775429927300 ) ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( 0.4618975727698178500, 6.903121755504628300, 17.90853587009396700 ) ) ; +#53 = VECTOR ( 'NONE', #2298, 1000.000000000000000 ) ; +#54 = CARTESIAN_POINT ( 'NONE', ( 12.38743087049645600, 11.11519415353342100, -21.24890435522947000 ) ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( 19.49449540169506500, 4.999999999999924500, 17.99271596417261800 ) ) ; +#56 = FACE_OUTER_BOUND ( 'NONE', #4116, .T. ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 12.73833325550376800, -27.37885710048672300 ) ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( 6.340034308756372600, 4.999999999999991100, -23.15873341919385100 ) ) ; +#59 = ORIENTED_EDGE ( 'NONE', *, *, #3278, .F. ) ; +#60 = ADVANCED_FACE ( 'NONE', ( #966 ), #854, .F. ) ; +#61 = LINE ( 'NONE', #1807, #3202 ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( -2.093355049262330900E-013, 23.05606075176168400, -53.54122113236624600 ) ) ; +#63 = AXIS2_PLACEMENT_3D ( 'NONE', #3507, #647, #2273 ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 9.832335812902451600, 9.972795681480127100, -63.55891290122994500 ) ) ; +#65 = ORIENTED_EDGE ( 'NONE', *, *, #3340, .F. ) ; +#66 = DIRECTION ( 'NONE', ( -2.078842786467799100E-015, -0.4987481893194179400, 0.8667469317226349500 ) ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766140300, 13.40741737109300000, -20.21665475151214200 ) ) ; +#68 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890696400, -0.2588190451025159100 ) ) ; +#69 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#70 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4585, #931, #2157 ), + ( #4980, #2569, #116 ), + ( #2962, #529, #3386 ), + ( #950, #3801, #1369 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -4.336808689942017700E-019, 0.0009110416949331967300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4082482904638625700, 1.000000000000000000), + ( 1.000000000000000000, 0.3944628615493958000, 1.000000000000000000), + ( 1.000000000000000000, 0.3869151953114927700, 1.000000000000000000), + ( 1.000000000000000000, 0.3869539162915051600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#71 = ORIENTED_EDGE ( 'NONE', *, *, #4498, .T. ) ; +#72 = EDGE_CURVE ( 'NONE', #3255, #4608, #2991, .T. ) ; +#73 = ORIENTED_EDGE ( 'NONE', *, *, #1759, .F. ) ; +#74 = ORIENTED_EDGE ( 'NONE', *, *, #753, .F. ) ; +#75 = AXIS2_PLACEMENT_3D ( 'NONE', #507, #3778, #1340 ) ; +#76 = EDGE_CURVE ( 'NONE', #590, #3179, #4110, .T. ) ; +#77 = ORIENTED_EDGE ( 'NONE', *, *, #2495, .F. ) ; +#78 = ADVANCED_FACE ( 'NONE', ( #1936 ), #1794, .T. ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.18129507813263500, -62.96121213358091500 ) ) ; +#80 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999998500, 4.999999999999995600, -3.207846720045877600E-016 ) ) ; +#81 = ORIENTED_EDGE ( 'NONE', *, *, #856, .F. ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( 7.549463530906677100, 14.37647756280947500, -66.24355561750037700 ) ) ; +#83 = ORIENTED_EDGE ( 'NONE', *, *, #5267, .T. ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.88990705086852100, -27.53877256284567900 ) ) ; +#85 = AXIS2_PLACEMENT_3D ( 'NONE', #5128, #2697, #264 ) ; +#86 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 17.00287651841781800, 3.396366830080327100, -28.01429519440274200 ) ) ; +#88 = CARTESIAN_POINT ( 'NONE', ( 5.600847862532599000, 24.13900734308238000, -62.39833514079321500 ) ) ; +#89 = ORIENTED_EDGE ( 'NONE', *, *, #2917, .F. ) ; +#90 = ORIENTED_EDGE ( 'NONE', *, *, #2388, .T. ) ; +#91 = ORIENTED_EDGE ( 'NONE', *, *, #1868, .F. ) ; +#92 = AXIS2_PLACEMENT_3D ( 'NONE', #5096, #254, #3906 ) ; +#93 = FACE_OUTER_BOUND ( 'NONE', #5022, .T. ) ; +#94 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .F. ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 14.12208453222556200, -26.74753221251634700 ) ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( 6.477783270150353300, 14.63323717001074100, -61.42638966327051300 ) ) ; +#97 = AXIS2_PLACEMENT_3D ( 'NONE', #1518, #1177, #4031 ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( 9.484725216257967200, 15.54616766683897900, -62.04835603578656800 ) ) ; +#99 = TOROIDAL_SURFACE ( 'NONE', #1974, 9.000000000000001800, 1.000000000000000000 ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 12.65496680558646100, -55.06972082365661000 ) ) ; +#101 = ORIENTED_EDGE ( 'NONE', *, *, #3210, .F. ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666627500, 11.00414968717650900, -55.80381863385391500 ) ) ; +#103 = EDGE_LOOP ( 'NONE', ( #2091, #1362, #3334, #1975, #2575 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824611500, 14.11082393428810100, -60.50305359653262400 ) ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( 10.81150822810045000, 23.51118090391093700, -64.23658212864376100 ) ) ; +#106 = ADVANCED_FACE ( 'NONE', ( #5017 ), #4748, .T. ) ; +#107 = CIRCLE ( 'NONE', #5068, 2.500000000000000900 ) ; +#108 = EDGE_CURVE ( 'NONE', #1818, #3302, #2870, .T. ) ; +#109 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3890, #4735, #2317 ), + ( #5144, #2713, #279 ), + ( #3124, #691, #3550 ), + ( #1112, #3966, #1529 ), + ( #4365, #1927, #4759 ), + ( #2336, #5163, #2735 ), + ( #298, #3142, #713 ), + ( #3571, #1133, #3987 ), + ( #1550, #4386, #1946 ), + ( #4782, #2358, #5182 ), + ( #2754, #319, #3163 ), + ( #733, #3593, #1154 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.168404344971008900E-019, 0.002312366223014865000, 0.004624732446029730000, 0.005780915557537162500, 0.006937098669044594900, 0.009249464892059459900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7442351329157315100, 1.000000000000000000), + ( 1.000000000000000000, 0.7783722774683222700, 1.000000000000000000), + ( 1.000000000000000000, 0.8360335679052745000, 1.000000000000000000), + ( 1.000000000000000000, 0.8595166983550568400, 1.000000000000000000), + ( 1.000000000000000000, 0.8820458337795678000, 1.000000000000000000), + ( 1.000000000000000000, 0.8874353740766136600, 1.000000000000000000), + ( 1.000000000000000000, 0.8934770379445338100, 1.000000000000000000), + ( 1.000000000000000000, 0.8941255649453351300, 1.000000000000000000), + ( 1.000000000000000000, 0.8888465352749603800, 1.000000000000000000), + ( 1.000000000000000000, 0.8756115354393891900, 1.000000000000000000), + ( 1.000000000000000000, 0.8546452472470428300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8928435782530939100, -0.4503669001738596100 ) ) ; +#111 = EDGE_CURVE ( 'NONE', #2017, #4806, #2396, .T. ) ; +#112 = APPROVAL_DATE_TIME ( #1232, #4160 ) ; +#113 = CYLINDRICAL_SURFACE ( 'NONE', #653, 5.000000000000000900 ) ; +#114 = VERTEX_POINT ( 'NONE', #177 ) ; +#115 = EDGE_CURVE ( 'NONE', #2914, #5172, #3134, .T. ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 1.689132947879366400, 2.770955885696602600, -30.56289577066580100 ) ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753884100, 11.69600936856535600, -61.15010120928893400 ) ) ; +#118 = CIRCLE ( 'NONE', #2062, 5.732233047033670200 ) ; +#119 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.77489008581955000, -26.94531476495732700 ) ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998900, 4.533070769978444000, -30.09878430398278200 ) ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( 18.73839914305173000, 0.7694653059419887000, -27.95975551666409200 ) ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 15.50626095683049900, 24.22188852777068700, -61.16665193529868100 ) ) ; +#123 = PLANE ( 'NONE', #5165 ) ; +#124 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994500, 13.99902869006382400, -27.82270432943648000 ) ) ; +#125 = VECTOR ( 'NONE', #1256, 1000.000000000000000 ) ; +#126 = ORIENTED_EDGE ( 'NONE', *, *, #1832, .F. ) ; +#127 = ADVANCED_FACE ( 'NONE', ( #3985 ), #724, .T. ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 14.50935294783794800, -26.81835075481546600 ) ) ; +#129 = ORIENTED_EDGE ( 'NONE', *, *, #2019, .T. ) ; +#130 = AXIS2_PLACEMENT_3D ( 'NONE', #576, #3436, #996 ) ; +#131 = CARTESIAN_POINT ( 'NONE', ( 1.144831032017095600, 23.06570567861704600, -56.26187742934129000 ) ) ; +#132 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2764, #4712, #1165 ), + ( #4018, #1575, #4419 ), + ( #1981, #4811, #2390 ), + ( #5214, #2784, #351 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0009065014181572868900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4082482904638629600, 1.000000000000000000), + ( 1.000000000000000000, 0.3944532028975418800, 1.000000000000000000), + ( 1.000000000000000000, 0.3869143520433925300, 1.000000000000000000), + ( 1.000000000000000000, 0.3869539162915006700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#133 = EDGE_LOOP ( 'NONE', ( #5186, #162, #2144, #4803 ) ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, 12.93424423647693200, -28.10801246388829000 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 1.160000857247097000, 0.7694653059181002500, -27.95975551661255300 ) ) ; +#136 = DIRECTION ( 'NONE', ( -0.7499999999999983300, -0.1711927069771167500, 0.6388998803238655800 ) ) ; +#137 = ORIENTED_EDGE ( 'NONE', *, *, #3120, .F. ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999997200, 13.81897016439289100, -27.08930131343862900 ) ) ; +#139 = EDGE_CURVE ( 'NONE', #1066, #2133, #4904, .T. ) ; +#140 = ORIENTED_EDGE ( 'NONE', *, *, #2681, .F. ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( 1.689148147403784400, 21.54831723221059300, -53.26445645348523100 ) ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 17.87563596120240200, -0.2895228560834223200, -25.88882264438122100 ) ) ; +#143 = ORIENTED_EDGE ( 'NONE', *, *, #851, .F. ) ; +#144 = VERTEX_POINT ( 'NONE', #194 ) ; +#145 = AXIS2_PLACEMENT_3D ( 'NONE', #971, #3831, #1394 ) ; +#146 = EDGE_CURVE ( 'NONE', #3309, #4463, #579, .T. ) ; +#147 = EDGE_LOOP ( 'NONE', ( #2125, #2911, #1383, #4170, #3893 ) ) ; +#148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#149 = ORIENTED_EDGE ( 'NONE', *, *, #1268, .T. ) ; +#150 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.69881218707800700, -55.63911965873600000 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( -1.086333905932738600, 5.000000000000001800, 20.00000000000000000 ) ) ; +#153 = VERTEX_POINT ( 'NONE', #3040 ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 21.41808039884321200, -54.88415103567514600 ) ) ; +#156 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.109329872312292000, -29.69677348923013900 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753949800, 11.47788851493755200, -22.67481328856044300 ) ) ; +#158 = ADVANCED_FACE ( 'NONE', ( #4789 ), #1563, .F. ) ; +#159 = VECTOR ( 'NONE', #2373, 1000.000000000000000 ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( 2.310079112818897800, 10.00000000000000200, 15.98275383403193600 ) ) ; +#161 = ORIENTED_EDGE ( 'NONE', *, *, #186, .F. ) ; +#162 = ORIENTED_EDGE ( 'NONE', *, *, #719, .T. ) ; +#163 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, 19.65596328590102000, -53.19380947054323600 ) ) ; +#164 = CYLINDRICAL_SURFACE ( 'NONE', #2423, 1.000000000000000000 ) ; +#165 = AXIS2_PLACEMENT_3D ( 'NONE', #2053, #4878, #2792 ) ; +#166 = ORIENTED_EDGE ( 'NONE', *, *, #5048, .T. ) ; +#167 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890705300, -0.2588190451025126900 ) ) ; +#169 = FACE_OUTER_BOUND ( 'NONE', #2961, .T. ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( 14.39505261680095500, 10.00000000000000400, 18.86694295405560200 ) ) ; +#171 = ORIENTED_EDGE ( 'NONE', *, *, #1433, .F. ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000500, 0.9469871269366061400, -25.37306697812085700 ) ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( 18.25616545030034400, 2.439157186645415400, -30.07038610934532100 ) ) ; +#174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#175 = TOROIDAL_SURFACE ( 'NONE', #4117, 10.00000000000000400, 2.500000000000000000 ) ; +#176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.625531029949085900E-016, -1.000000000000000000 ) ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, -1.505759517047136500, -23.64527242200717400 ) ) ; +#178 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4959, #4564, #1728, #2547, #87, #2936, #508, #3362, #922, #3779, #1341, #4176 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001426078552159824300, 0.002139117828239731000, 0.002852157104319638100, 0.004278235656479450700, 0.005704314208639263200 ), + .UNSPECIFIED. ) ; +#179 = CIRCLE ( 'NONE', #4008, 1.000000000000000200 ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.7915319382097717500, 17.39997592866755100 ) ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 1.635308208425009200, 21.51138181275113200, -52.98664168478106300 ) ) ; +#182 = EDGE_CURVE ( 'NONE', #2592, #614, #2751, .T. ) ; +#183 = CIRCLE ( 'NONE', #4143, 5.000000000000000000 ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( 11.76640806785861100, 20.81160807137693800, -60.43185957277795200 ) ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 12.65446821274872100, -55.06985442120481600 ) ) ; +#186 = EDGE_CURVE ( 'NONE', #4608, #1818, #1380, .T. ) ; +#187 = LINE ( 'NONE', #953, #4418 ) ; +#188 = ADVANCED_FACE ( 'NONE', ( #462 ), #3601, .F. ) ; +#189 = AXIS2_PLACEMENT_3D ( 'NONE', #1099, #4927, #2518 ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.364201192633155200, -5.258819045102568700 ) ) ; +#191 = LINE ( 'NONE', #5109, #2246 ) ; +#192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#193 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.96533279648316700, -53.78041229006792900 ) ) ; +#195 = ORIENTED_EDGE ( 'NONE', *, *, #4369, .F. ) ; +#196 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.513723080109431700, 17.10654937114235400 ) ) ; +#197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753869000, 21.11132182176493200, -58.62727584096747100 ) ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 18.28631956967474200, 11.11883345317672300, -56.92515803322875500 ) ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.709269841782313100, 16.93242356500262200 ) ) ; +#201 = ORIENTED_EDGE ( 'NONE', *, *, #2709, .F. ) ; +#202 = EDGE_LOOP ( 'NONE', ( #216, #1464, #1390, #5101 ) ) ; +#203 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 17.43638568872430400, 12.78570000119252700, -55.55762375706006400 ) ) ; +#205 = AXIS2_PLACEMENT_3D ( 'NONE', #3408, #967, #3825 ) ; +#206 = ORIENTED_EDGE ( 'NONE', *, *, #3852, .F. ) ; +#207 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#208 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4388, #692, #4783, #2359, #5183, #2755, #321, #3165, #734, #3594 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005589821217220172000, 0.001117964243444034400, 0.001676946365166051600, 0.002235928486888068800 ), + .UNSPECIFIED. ) ; +#209 = VERTEX_POINT ( 'NONE', #1867 ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.01006620121519600, -57.71066651153220300 ) ) ; +#211 = VERTEX_POINT ( 'NONE', #2279 ) ; +#213 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -8.999999999999998200, 12.50000000000000200 ) ) ; +#214 = CARTESIAN_POINT ( 'NONE', ( 18.24109450680948900, 21.67328587988185600, -53.52186271488686500 ) ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, -18.31287684118413500, -36.48065332244486600 ) ) ; +#216 = ORIENTED_EDGE ( 'NONE', *, *, #4443, .T. ) ; +#217 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#218 = ORIENTED_EDGE ( 'NONE', *, *, #5124, .F. ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.241988926538506700, -30.55360690546238800 ) ) ; +#220 = EDGE_CURVE ( 'NONE', #1017, #2628, #3841, .T. ) ; +#221 = CARTESIAN_POINT ( 'NONE', ( 15.19572658568687600, 8.474185078528494200, 21.21205295881441100 ) ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( 0.4677924866207583400, 7.067894561045969600, 17.89564910937192000 ) ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#224 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666600, 21.45216315970806800, -53.00428186137943200 ) ) ; +#226 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999663400, 11.03846717248112300, -59.36264505207125100 ) ) ; +#227 = VERTEX_POINT ( 'NONE', #577 ) ; +#228 = APPROVAL ( #4489, 'UNSPECIFIED' ) ; +#229 = EDGE_CURVE ( 'NONE', #1589, #2761, #4066, .T. ) ; +#230 = CARTESIAN_POINT ( 'NONE', ( 2.023920516043050900, -0.2902363653627115200, -25.88746131384934700 ) ) ; +#231 = VERTEX_POINT ( 'NONE', #616 ) ; +#232 = ORIENTED_EDGE ( 'NONE', *, *, #5087, .T. ) ; +#233 = DIRECTION ( 'NONE', ( -8.979589471384580400E-016, -0.2588190451025130200, 0.9659258262890705300 ) ) ; +#234 = CIRCLE ( 'NONE', #4999, 2.500000000000000000 ) ; +#235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 1.529371471185450500, 10.00000000000000500, 17.89504286779636300 ) ) ; +#237 = ORIENTED_EDGE ( 'NONE', *, *, #3335, .F. ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753949800, 13.89270308066021200, -22.02776567580416200 ) ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( 17.69209828751860800, 10.00000000000000200, 18.47878816117017600 ) ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 12.85037919372188100, -55.79900978460639700 ) ) ; +#241 = LINE ( 'NONE', #3190, #2433 ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 12.11954090265531500, -58.59897251900945000 ) ) ; +#243 = ORIENTED_EDGE ( 'NONE', *, *, #1901, .T. ) ; +#244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 15.60908475242821900, 13.21622010239350700, -19.49407087209494400 ) ) ; +#246 = CARTESIAN_POINT ( 'NONE', ( -9.833554879477274400E-013, 16.21170400133518900, -26.99675286799638800 ) ) ; +#247 = AXIS2_PLACEMENT_3D ( 'NONE', #4420, #1983, #4813 ) ; +#248 = LINE ( 'NONE', #1863, #4573 ) ; +#249 = EDGE_LOOP ( 'NONE', ( #4319, #1692, #3395, #941, #4667, #2187, #2968, #4555 ) ) ; +#250 = APPROVAL_PERSON_ORGANIZATION ( #1346, #4160, #1240 ) ; +#251 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#252 = FACE_OUTER_BOUND ( 'NONE', #2866, .T. ) ; +#254 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( 2.445395345880091200, 2.060583700454313500, -30.66870928187288200 ) ) ; +#255 = EDGE_CURVE ( 'NONE', #292, #3528, #2614, .T. ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.96819975629100700, -27.83096491734441700 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( 2.605134570855317700, 10.00000000000000200, 16.20708147606317000 ) ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -88.81885793164890700, -72.39384004447242700 ) ) ; +#259 = CIRCLE ( 'NONE', #1776, 2.500000000000000900 ) ; +#260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 9.000000000000003600, 5.665249758739323100 ) ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( 17.43650001184191800, 12.78540757118547300, -55.55653238825032500 ) ) ; +#263 = AXIS2_PLACEMENT_3D ( 'NONE', #4730, #3961, #1902 ) ; +#264 = DIRECTION ( 'NONE', ( 2.580773553939889600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#265 = EDGE_CURVE ( 'NONE', #2104, #3707, #2508, .T. ) ; +#266 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 7.565755819676938100, 12.86709432349320500, -18.10888753925036800 ) ) ; +#268 = LINE ( 'NONE', #2070, #125 ) ; +#269 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.000000000000003600, 15.31390237722978900 ) ) ; +#271 = ORIENTED_EDGE ( 'NONE', *, *, #375, .T. ) ; +#272 = AXIS2_PLACEMENT_3D ( 'NONE', #1821, #4650, #2227 ) ; +#273 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#275 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 2.471227202931445700, 1.815386302940369800, -30.13357163206600800 ) ) ; +#276 = ORIENTED_EDGE ( 'NONE', *, *, #3898, .F. ) ; +#277 = CARTESIAN_POINT ( 'NONE', ( 18.21222034326009600, 10.00000000000000000, 15.60096078962558500 ) ) ; +#278 = CARTESIAN_POINT ( 'NONE', ( 5.309141600716869500, 13.07160706031922900, -18.92952852290004300 ) ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 19.00351428436394800, -0.7576586040403308100, 17.50000000000000000 ) ) ; +#280 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#281 = ORIENTED_EDGE ( 'NONE', *, *, #796, .T. ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, 19.72126664952463300, -53.43752494149174500 ) ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( 6.020253672281840300, 24.09756725726575500, -58.65322126686606900 ) ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 5.615842399053182700E-013, 15.85356619886938900, -26.34681859725503000 ) ) ; +#285 = ORIENTED_EDGE ( 'NONE', *, *, #1943, .F. ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( 5.281972922924028400, -9.999999999999998200, 12.50000000000000200 ) ) ; +#287 = VERTEX_POINT ( 'NONE', #1854 ) ; +#288 = ORIENTED_EDGE ( 'NONE', *, *, #2276, .F. ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( 19.20963311124166900, 9.215751637415868600, 17.17593602343640300 ) ) ; +#290 = AXIS2_PLACEMENT_3D ( 'NONE', #3791, #1355, #4193 ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000002200, 0.4654998936849596400, -27.35715002713493900 ) ) ; +#292 = VERTEX_POINT ( 'NONE', #997 ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( 1.775380247966691800, -0.1313591851747348800, -26.19170789662501900 ) ) ; +#294 = ORIENTED_EDGE ( 'NONE', *, *, #4004, .T. ) ; +#295 = EDGE_CURVE ( 'NONE', #3295, #4426, #335, .T. ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 8.142830574372954500, 13.43371265343707300, -20.42360687517737700 ) ) ; +#297 = EDGE_CURVE ( 'NONE', #1811, #1829, #3724, .T. ) ; +#298 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.894746960652464700, 17.14599244276432400 ) ) ; +#299 = ORIENTED_EDGE ( 'NONE', *, *, #851, .T. ) ; +#300 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, 0.4603260299409825400, -25.28451549527915200 ) ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, 19.65596328590102000, -53.19380947054323600 ) ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 1.635310285106272400, 10.94440962682346100, -55.81951884500571700 ) ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 1.304528265746653500, 14.42120252345312400, -24.44693010455532400 ) ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( 9.117431131972717000, -5.690355937288492400, 17.52394423124950200 ) ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( 5.864514874088032800, 24.09634009759279000, -62.62494340410462700 ) ) ; +#306 = FACE_OUTER_BOUND ( 'NONE', #2927, .T. ) ; +#307 = AXIS2_PLACEMENT_3D ( 'NONE', #3860, #1822, #2211 ) ; +#308 = ORIENTED_EDGE ( 'NONE', *, *, #4721, .T. ) ; +#309 = EDGE_LOOP ( 'NONE', ( #1123, #1745, #380, #5180 ) ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 7.804772097074518900, 17.53238811383921500 ) ) ; +#311 = CIRCLE ( 'NONE', #1607, 5.000000000000000000 ) ; +#312 = ORIENTED_EDGE ( 'NONE', *, *, #3399, .F. ) ; +#314 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#313 = CARTESIAN_POINT ( 'NONE', ( 5.709659680644193700, 1.400365465233340200, -24.76277282551347300 ) ) ; +#315 = VECTOR ( 'NONE', #4471, 1000.000000000000000 ) ; +#316 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#317 = ORIENTED_EDGE ( 'NONE', *, *, #2753, .T. ) ; +#318 = CARTESIAN_POINT ( 'NONE', ( 9.721838353935087400, 11.02206341364413300, -20.85584151256852800 ) ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 7.042995457298501600, 17.59920510227974700 ) ) ; +#320 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2, #2463, #1251, #4104, #1662, #4501, #2064, #4889, #2478, #16 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.002860824368777627900, 0.004493676839867103200, 0.006126529310956579400, 0.007759381782046053900, 0.009392234253135529200 ), + .UNSPECIFIED. ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.847791774116423400, 16.04435453005355000 ) ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 3.525717630716669800, 10.00000000000000200, 17.07501550525216400 ) ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( 14.61642707707597200, -9.999999999999998200, 12.50000000000000200 ) ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( 8.366334051660977900, 20.77546342002471700, -60.48712670388842800 ) ) ; +#325 = LINE ( 'NONE', #631, #4526 ) ; +#326 = FACE_OUTER_BOUND ( 'NONE', #3861, .T. ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( 18.38337656514308400, 11.13387307542970300, -57.59865911871286700 ) ) ; +#328 = CIRCLE ( 'NONE', #3827, 6.123724356957925600 ) ; +#330 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.549839760228988200, -30.48955358189879300 ) ) ; +#329 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333339900, 8.464781470452912500, -46.32676742991939300 ) ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( 2.313594401576162700, 10.00000000000000400, 15.98543543494562700 ) ) ; +#332 = EDGE_CURVE ( 'NONE', #804, #4436, #1427, .T. ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( 1.461383130017923900, 14.45151170086659700, -25.27148499237937400 ) ) ; +#334 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 23.06396930162840800, -53.00858017148790700 ) ) ; +#335 = CIRCLE ( 'NONE', #4652, 2.500000000000002200 ) ; +#336 = CARTESIAN_POINT ( 'NONE', ( 17.02026781186545900, 7.500000000000003600, 16.46446609406728000 ) ) ; +#337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807600E-016, 1.000000000000000000 ) ) ; +#338 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #2482 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1224, #4073, #1632 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#339 = CARTESIAN_POINT ( 'NONE', ( 5.086868895404793800, 8.538108095824311400, 21.49517572665460500 ) ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( 1.211465521467868900, 8.089255650988798500, 18.23223304703364200 ) ) ; +#341 = EDGE_CURVE ( 'NONE', #687, #287, #4828, .T. ) ; +#342 = CARTESIAN_POINT ( 'NONE', ( 18.20925185249106100, 21.54831723211835400, -53.26445645350687400 ) ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.69880539835712500, -55.63909432224744500 ) ) ; +#344 = CARTESIAN_POINT ( 'NONE', ( 9.890221317799717600, 26.26727458465343200, -59.18689873626043900 ) ) ; +#345 = ADVANCED_FACE ( 'NONE', ( #4422 ), #4539, .T. ) ; +#346 = ORIENTED_EDGE ( 'NONE', *, *, #2169, .F. ) ; +#347 = CARTESIAN_POINT ( 'NONE', ( 17.42717279707054700, 1.815386302943010400, -30.13357163206412500 ) ) ; +#348 = VERTEX_POINT ( 'NONE', #4335 ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666600, -3.683943226805102400, -0.9871096125845055800 ) ) ; +#350 = ORIENTED_EDGE ( 'NONE', *, *, #1991, .T. ) ; +#352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025234600, 0.9659258262890676500 ) ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.62051269293465500, -55.34690196774871400 ) ) ; +#353 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 10.18804067014304400, -45.86502151901292700 ) ) ; +#354 = ORIENTED_EDGE ( 'NONE', *, *, #108, .F. ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 21.06833092140863400, -54.06046750866549600 ) ) ; +#356 = ORIENTED_EDGE ( 'NONE', *, *, #2976, .F. ) ; +#357 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -2.312964634635743900E-016, -1.000000000000000000 ) ) ; +#359 = AXIS2_PLACEMENT_3D ( 'NONE', #3180, #747, #3603 ) ; +#360 = ORIENTED_EDGE ( 'NONE', *, *, #638, .F. ) ; +#361 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5093, #4277, #3070, #644 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.878959614448864200E-018, 0.0007565234065506128800 ), + .UNSPECIFIED. ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( 11.46454309132787400, 23.59025563712428300, -64.08398182602695700 ) ) ; +#363 = ORIENTED_EDGE ( 'NONE', *, *, #1877, .F. ) ; +#364 = CARTESIAN_POINT ( 'NONE', ( 16.07956481410767700, 2.459464668838795100, -26.43108456632393200 ) ) ; +#365 = ORIENTED_EDGE ( 'NONE', *, *, #1544, .T. ) ; +#366 = EDGE_CURVE ( 'NONE', #3018, #2014, #191, .T. ) ; +#367 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 4.657035876501082900, 17.19065370105807500 ) ) ; +#368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#369 = FACE_OUTER_BOUND ( 'NONE', #4229, .T. ) ; +#370 = ADVANCED_FACE ( 'NONE', ( #2386 ), #2303, .T. ) ; +#371 = ORIENTED_EDGE ( 'NONE', *, *, #3692, .F. ) ; +#372 = ORIENTED_EDGE ( 'NONE', *, *, #3169, .T. ) ; +#373 = AXIS2_PLACEMENT_3D ( 'NONE', #4226, #1786, #4621 ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000094400, 23.12838330136839500, -55.42088096482837800 ) ) ; +#375 = EDGE_CURVE ( 'NONE', #3752, #5114, #3332, .T. ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666653500, -88.81885793164890700, -72.39384004447242700 ) ) ; +#377 = FACE_BOUND ( 'NONE', #3411, .T. ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 18.29300028884714600, 21.93966226050982700, -54.08179644692019400 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 1.283772301084710400, 11.17455095316050000, -58.82658107835180100 ) ) ; +#380 = ORIENTED_EDGE ( 'NONE', *, *, #680, .T. ) ; +#381 = CARTESIAN_POINT ( 'NONE', ( 0.5391630027160876400, 7.848783069637552700, 17.80887397500164900 ) ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 12.80820265758527800, 21.01817663592645100, -60.01080981239874700 ) ) ; +#383 = AXIS2_PLACEMENT_3D ( 'NONE', #4762, #2338, #5166 ) ; +#384 = ORIENTED_EDGE ( 'NONE', *, *, #2395, .F. ) ; +#385 = CARTESIAN_POINT ( 'NONE', ( 19.32364250059710300, 8.438216624448070700, 17.67093621693175700 ) ) ; +#386 = CIRCLE ( 'NONE', #2378, 1.000000000000000900 ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( 13.85422120535814000, -5.221104768607070000, 17.50000000000000400 ) ) ; +#387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144700, 0.9659258262890698700 ) ) ; +#389 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333800, 11.07935950138769600, -56.35951613027766900 ) ) ; +#390 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4841, #3212, #5240, #2812 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.469446951953614200E-018, 0.0008417482326424605400 ), + .UNSPECIFIED. ) ; +#391 = AXIS2_PLACEMENT_3D ( 'NONE', #2748, #314, #3158 ) ; +#392 = CIRCLE ( 'NONE', #2665, 1.000000000000000900 ) ; +#393 = ORIENTED_EDGE ( 'NONE', *, *, #4216, .T. ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 110.0000000000000000, 5.665249758739311600 ) ) ; +#395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.4503669001733742200, 0.8928435782533390400 ) ) ; +#396 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#397 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890699800, -0.2588190451025145200 ) ) ; +#398 = VECTOR ( 'NONE', #1455, 1000.000000000000000 ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.999999986243333100, 15.50296376571724000 ) ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 13.87820216654426500, 24.09752278749030200, -58.65310366248118600 ) ) ; +#401 = ADVANCED_FACE ( 'NONE', ( #3209 ), #4308, .T. ) ; +#402 = FACE_OUTER_BOUND ( 'NONE', #1249, .T. ) ; +#403 = EDGE_CURVE ( 'NONE', #682, #2222, #1040, .T. ) ; +#404 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890698700, -0.2588190451025151900 ) ) ; +#405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#406 = ORIENTED_EDGE ( 'NONE', *, *, #943, .T. ) ; +#407 = EDGE_CURVE ( 'NONE', #4243, #2568, #4280, .T. ) ; +#408 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( 19.55423831579440700, 7.786564234806119700, 17.71716636108218900 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.609990704036856000, 16.81510998235430100 ) ) ; +#411 = EDGE_LOOP ( 'NONE', ( #3556, #1234 ) ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 14.56820883659931600, 11.39987602766559000, -22.38366672243672200 ) ) ; +#413 = EDGE_CURVE ( 'NONE', #925, #4523, #1704, .T. ) ; +#414 = CARTESIAN_POINT ( 'NONE', ( -1.254905337439579600E-014, 9.053482102790033200, 17.01550799608346400 ) ) ; +#415 = ORIENTED_EDGE ( 'NONE', *, *, #1442, .F. ) ; +#416 = ORIENTED_EDGE ( 'NONE', *, *, #3273, .T. ) ; +#417 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2421, #4821, #2816, #381 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.505213034913026600E-019, 0.0008297751057411426700 ), + .UNSPECIFIED. ) ; +#418 = EDGE_LOOP ( 'NONE', ( #3793, #4429, #5205, #3684, #1195, #898 ) ) ; +#419 = AXIS2_PLACEMENT_3D ( 'NONE', #261, #3099, #673 ) ; +#420 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#421 = ORIENTED_EDGE ( 'NONE', *, *, #3208, .T. ) ; +#422 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, 15.34856020936186600, -27.46109844868023200 ) ) ; +#423 = ADVANCED_FACE ( 'NONE', ( #2004 ), #5231, .T. ) ; +#424 = DATE_TIME_ROLE ( 'classification_date' ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( 15.74643389075224300, 12.55270957304807300, -64.02796396799861600 ) ) ; +#426 = ORIENTED_EDGE ( 'NONE', *, *, #4404, .F. ) ; +#427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890700900 ) ) ; +#428 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #552, #1392, #2602, #155, #2998, #569 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001791495265805627700, 0.003582990531611255300 ), + .UNSPECIFIED. ) ; +#429 = ORIENTED_EDGE ( 'NONE', *, *, #4582, .F. ) ; +#430 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -2.994639546929044100, -0.8024112482219195600 ) ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( 0.5391630027160815300, 7.848783069637188500, 17.80887397500187000 ) ) ; +#433 = ORIENTED_EDGE ( 'NONE', *, *, #2787, .F. ) ; +#434 = CIRCLE ( 'NONE', #3081, 4.999999999999997300 ) ; +#435 = EDGE_CURVE ( 'NONE', #5236, #3302, #2121, .T. ) ; +#436 = ORIENTED_EDGE ( 'NONE', *, *, #1089, .T. ) ; +#437 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000048900, 15.40145999540666500, -25.57265685700532700 ) ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999800, 4.999999999999995600, 1.004216362529351200E-015 ) ) ; +#439 = CIRCLE ( 'NONE', #1321, 1.000000000000000900 ) ; +#440 = EDGE_CURVE ( 'NONE', #3218, #4495, #512, .T. ) ; +#441 = VERTEX_POINT ( 'NONE', #3770 ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( 9.785175386745489600, 14.90823458395347100, -66.60464685738708100 ) ) ; +#443 = CARTESIAN_POINT ( 'NONE', ( 13.41812267230304600, 14.63426014622726600, -61.42744227598455400 ) ) ; +#444 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000100, 4.999999999999991100, -24.44661701239532900 ) ) ; +#445 = FACE_OUTER_BOUND ( 'NONE', #4994, .T. ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( 15.31461861019077400, 1.951605110362132800, -25.61679960318591000 ) ) ; +#447 = VERTEX_POINT ( 'NONE', #1376 ) ; +#448 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#449 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4452, #4834, #785, #2015, #4848, #2430, #5254, #2822, #388, #3238 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002359034401791902600, 0.004718068803583805100, 0.007077103205375707300, 0.009436137607167610300 ), + .UNSPECIFIED. ) ; +#450 = ADVANCED_FACE ( 'NONE', ( #4157 ), #1482, .T. ) ; +#451 = AXIS2_PLACEMENT_3D ( 'NONE', #3733, #2908, #3330 ) ; +#452 = CYLINDRICAL_SURFACE ( 'NONE', #3606, 1.000000000000000400 ) ; +#453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890703100, 0.2588190451025137500 ) ) ; +#454 = AXIS2_PLACEMENT_3D ( 'NONE', #4853, #2437, #5260 ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 5.608983647218253500, 13.37896340457608000, -65.28829241343761700 ) ) ; +#456 = CARTESIAN_POINT ( 'NONE', ( 11.29382192458562900, 10.86424561740892100, -63.25059173027952400 ) ) ; +#457 = LINE ( 'NONE', #2119, #4639 ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 0.5391630027160876400, 7.848783069637552700, 17.80887397500164900 ) ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( 12.03384781621694300, 12.85445447142001100, -18.05701256112541800 ) ) ; +#460 = CARTESIAN_POINT ( 'NONE', ( 18.97947901366615000, -0.9176039658621575300, 17.50000000000000400 ) ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999999100, 12.50000000000000000 ) ) ; +#462 = FACE_OUTER_BOUND ( 'NONE', #4497, .T. ) ; +#463 = ORIENTED_EDGE ( 'NONE', *, *, #1581, .T. ) ; +#464 = EDGE_CURVE ( 'NONE', #4936, #2222, #5090, .T. ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( 14.61642707707597200, -4.999999999999998200, 12.50000000000000000 ) ) ; +#466 = CARTESIAN_POINT ( 'NONE', ( 1.159716603724660700, 23.04931316464710300, -56.20069973434166100 ) ) ; +#467 = ADVANCED_FACE ( 'NONE', ( #1862 ), #2818, .T. ) ; +#468 = EDGE_CURVE ( 'NONE', #4601, #742, #3915, .T. ) ; +#469 = ORIENTED_EDGE ( 'NONE', *, *, #4181, .T. ) ; +#470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9875666767649455800, 0.1572006963834506600 ) ) ; +#471 = ORIENTED_EDGE ( 'NONE', *, *, #4948, .F. ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( 11.16286636671034500, 14.77216645903378700, -66.51960248529572100 ) ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( 0.4039045983059362800, 5.475217086152757600, 17.99271596417117200 ) ) ; +#474 = AXIS2_PLACEMENT_3D ( 'NONE', #5130, #266, #3105 ) ; +#475 = ORIENTED_EDGE ( 'NONE', *, *, #557, .F. ) ; +#476 = CARTESIAN_POINT ( 'NONE', ( 13.03645723300152600, 13.55304400688785500, -20.85044778998839400 ) ) ; +#477 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999500, 12.67319579279195600, -27.13576078017012300 ) ) ; +#478 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .T. ) ; +#479 = ORIENTED_EDGE ( 'NONE', *, *, #403, .T. ) ; +#480 = VERTEX_POINT ( 'NONE', #3913 ) ; +#481 = EDGE_LOOP ( 'NONE', ( #524, #243, #749, #1520, #5221 ) ) ; +#482 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 21.06826882162714300, -54.06029865742188900 ) ) ; +#483 = EDGE_LOOP ( 'NONE', ( #4305, #372, #1266 ) ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( 0.4039045983049319200, 5.000000000027274200, 17.99271596417261800 ) ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( 9.040655533204768400, 15.48699437936639700, -62.02189397328687900 ) ) ; +#486 = FACE_OUTER_BOUND ( 'NONE', #1479, .T. ) ; +#487 = AXIS2_PLACEMENT_3D ( 'NONE', #2964, #3803, #3389 ) ; +#488 = EDGE_LOOP ( 'NONE', ( #195, #4587, #34, #3360, #3076 ) ) ; +#489 = ORIENTED_EDGE ( 'NONE', *, *, #4362, .F. ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824605200, 11.47788851493754500, -22.67481328856045100 ) ) ; +#491 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#492 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#493 = ADVANCED_FACE ( 'NONE', ( #790 ), #910, .T. ) ; +#494 = VECTOR ( 'NONE', #2089, 999.9999999999998900 ) ; +#495 = ORIENTED_EDGE ( 'NONE', *, *, #3307, .F. ) ; +#496 = EDGE_CURVE ( 'NONE', #599, #2017, #1738, .T. ) ; +#497 = FACE_OUTER_BOUND ( 'NONE', #1087, .T. ) ; +#498 = ORIENTED_EDGE ( 'NONE', *, *, #182, .F. ) ; +#499 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025159700, 0.9659258262890697600 ) ) ; +#501 = CC_DESIGN_APPROVAL ( #228, ( #5242 ) ) ; +#502 = EDGE_CURVE ( 'NONE', #2027, #3685, #3766, .T. ) ; +#503 = VECTOR ( 'NONE', #427, 999.9999999999998900 ) ; +#504 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.298510400299580200E-032, -1.325001034533938900E-016 ) ) ; +#505 = CARTESIAN_POINT ( 'NONE', ( 8.605271840344434200, 10.86393322912281600, -63.25081798650447200 ) ) ; +#506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, -4.374999999999900500, -1.172277716886104300 ) ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 16.73713874439822600, 3.064956118849396100, -27.44178832981151200 ) ) ; +#509 = VECTOR ( 'NONE', #2616, 1000.000000000000000 ) ; +#510 = CARTESIAN_POINT ( 'NONE', ( 6.409669035453994500, 23.99207333396101700, -63.04584181337058600 ) ) ; +#511 = VECTOR ( 'NONE', #3471, 999.9999999999998900 ) ; +#512 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2132, #3347, #2533, #4960, #2549, #88, #2937, #510, #3363, #924, #3781, #1344, #4178, #1744, #4581, #2149, #4972, #2565, #105, #2955, #521, #3380, #939, #3792, #1356, #4194, #1756, #4591, #2165, #4988, #2574, #122, #2970, #538, #3392, #956 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.734723475976806900E-018, 0.002073778315922775000, 0.003110667473884162900, 0.004147556631845550900, 0.005184445789806937900, 0.006221334947768325900, 0.007258224105729712900, 0.008295113263691101700, 0.008813557842671791400, 0.009332002421652484500, 0.009850447000633175800, 0.01036889157961386700, 0.01140578073757525200, 0.01244266989553663300, 0.01347955905349801500, 0.01451644821145939800, 0.01555333736942078300, 0.01659022652738216200 ), + .UNSPECIFIED. ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 9.154085150328953100, -46.14206906555681100 ) ) ; +#514 = CIRCLE ( 'NONE', #2834, 10.00000000000000200 ) ; +#515 = ADVANCED_FACE ( 'NONE', ( #2684 ), #3516, .F. ) ; +#516 = AXIS2_PLACEMENT_3D ( 'NONE', #353, #3205, #769 ) ; +#517 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 19.65596328590100900, -53.19380947054323600 ) ) ; +#518 = CARTESIAN_POINT ( 'NONE', ( 5.320644360138625300, 13.21386146403930600, -65.08039811967127300 ) ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 10.41035479378019200, 15.56271785303359100, -62.05531080292775000 ) ) ; +#520 = DIRECTION ( 'NONE', ( -9.251858538542967900E-016, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#521 = CARTESIAN_POINT ( 'NONE', ( 11.32318305185037300, 23.57156752814098900, -64.11952689591342400 ) ) ; +#522 = EDGE_LOOP ( 'NONE', ( #2831, #4540, #3173 ) ) ; +#523 = EDGE_CURVE ( 'NONE', #2252, #1066, #4961, .T. ) ; +#524 = ORIENTED_EDGE ( 'NONE', *, *, #1706, .F. ) ; +#525 = AXIS2_PLACEMENT_3D ( 'NONE', #2901, #470, #3325 ) ; +#526 = EDGE_CURVE ( 'NONE', #447, #3300, #2249, .T. ) ; +#527 = ORIENTED_EDGE ( 'NONE', *, *, #3439, .F. ) ; +#528 = DIRECTION ( 'NONE', ( -0.6484729204542018000, 0.0000000000000000000, 0.7612377233411377100 ) ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( -3.962334452273015000E-013, 1.411454811410555400, -31.54453161434035000 ) ) ; +#530 = ORIENTED_EDGE ( 'NONE', *, *, #5277, .T. ) ; +#531 = ORIENTED_EDGE ( 'NONE', *, *, #2395, .T. ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.96819975629101100, -27.83096491734441000 ) ) ; +#533 = AXIS2_PLACEMENT_3D ( 'NONE', #2190, #150, #3013 ) ; +#534 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #845, #3280, #3695 ), + ( #1255, #4107, #1667 ), + ( #4505, #2067, #4896 ), + ( #2481, #21, #2876 ), + ( #443, #3294, #858 ), + ( #3713, #1270, #4120 ), + ( #1680, #4520, #2084 ), + ( #4907, #2498, #36 ), + ( #2888, #456, #3311 ), + ( #872, #3729, #1290 ), + ( #4131, #1693, #4534 ), + ( #2100, #4921, #2511 ), + ( #51, #2902, #472 ), + ( #3326, #893, #3745 ), + ( #1302, #4148, #1712 ), + ( #4546, #2115, #4938 ), + ( #2527, #64, #2921 ), + ( #485, #3343, #906 ), + ( #3765, #1319, #4163 ), + ( #1725, #4559, #2127 ), + ( #4955, #2543, #82 ), + ( #2933, #505, #3357 ), + ( #919, #3776, #1338 ), + ( #4173, #1740, #4574 ), + ( #2142, #4966, #2558 ), + ( #96, #2949, #518 ), + ( #3372, #932, #3787 ), + ( #1350, #4186, #1752 ), + ( #4586, #2158, #4981 ), + ( #2570, #117, #2963 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001821963092897927000, 0.002732944639346890700, 0.003643926185795854000, 0.004554907732244817300, 0.005465889278693781400, 0.006376870825142744700, 0.007287852371591708000, 0.008198833918040670400, 0.009109815464489634500, 0.01002079701093859900, 0.01093177855738756300, 0.01184276010383652700, 0.01275374165028548900, 0.01457570474318341600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.6772915413244903200, 1.000000000000000000), + ( 1.000000000000000000, 0.6445454458855987000, 1.000000000000000000), + ( 1.000000000000000000, 0.5939629448189045500, 1.000000000000000000), + ( 1.000000000000000000, 0.5767908629399913800, 1.000000000000000000), + ( 1.000000000000000000, 0.5429432263402798100, 1.000000000000000000), + ( 1.000000000000000000, 0.5263376991094074200, 1.000000000000000000), + ( 1.000000000000000000, 0.4945572982864997500, 1.000000000000000000), + ( 1.000000000000000000, 0.4793791521782845800, 1.000000000000000000), + ( 1.000000000000000000, 0.4515220704859211900, 1.000000000000000000), + ( 1.000000000000000000, 0.4388431758426735700, 1.000000000000000000), + ( 1.000000000000000000, 0.4173988080497450000, 1.000000000000000000), + ( 1.000000000000000000, 0.4086260181190441400, 1.000000000000000000), + ( 1.000000000000000000, 0.3968354681864774700, 1.000000000000000000), + ( 1.000000000000000000, 0.3937730349074360400, 1.000000000000000000), + ( 1.000000000000000000, 0.3937573777456771500, 1.000000000000000000), + ( 1.000000000000000000, 0.3968041983470951800, 1.000000000000000000), + ( 1.000000000000000000, 0.4085676386353639900, 1.000000000000000000), + ( 1.000000000000000000, 0.4173265843853469200, 1.000000000000000000), + ( 1.000000000000000000, 0.4387620092568709800, 1.000000000000000000), + ( 1.000000000000000000, 0.4514458673445060900, 1.000000000000000000), + ( 1.000000000000000000, 0.4793357291213155000, 1.000000000000000000), + ( 1.000000000000000000, 0.4945415424109931800, 1.000000000000000000), + ( 1.000000000000000000, 0.5263987182475204900, 1.000000000000000000), + ( 1.000000000000000000, 0.5430665799313684200, 1.000000000000000000), + ( 1.000000000000000000, 0.5770027115288848300, 1.000000000000000000), + ( 1.000000000000000000, 0.5940619912631456300, 1.000000000000000000), + ( 1.000000000000000000, 0.6445417317124645400, 1.000000000000000000), + ( 1.000000000000000000, 0.6772647162896497900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865464600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#535 = CARTESIAN_POINT ( 'NONE', ( 1.645205010331446400, 2.861659670334707700, -30.82764420363844900 ) ) ; +#536 = ORIENTED_EDGE ( 'NONE', *, *, #2286, .T. ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.629197898640703600, -27.44374670137861800 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( 16.16018460489231900, 24.14057802016414600, -60.35495406910378300 ) ) ; +#539 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.50000000000000000 ) ) ; +#540 = ADVANCED_FACE ( 'NONE', ( #4851 ), #646, .F. ) ; +#541 = ORIENTED_EDGE ( 'NONE', *, *, #4161, .T. ) ; +#542 = VERTEX_POINT ( 'NONE', #3552 ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#544 = FACE_OUTER_BOUND ( 'NONE', #3241, .T. ) ; +#545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#546 = ORIENTED_EDGE ( 'NONE', *, *, #820, .T. ) ; +#547 = VERTEX_POINT ( 'NONE', #3968 ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( 1.283772301084713500, 22.81597255677691300, -55.70727156091262300 ) ) ; +#549 = AXIS2_PLACEMENT_3D ( 'NONE', #2695, #260, #3098 ) ; +#550 = CIRCLE ( 'NONE', #205, 1.000000000000000700 ) ; +#551 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -8.074441630149902200, -13.39944000404294900 ) ) ; +#552 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 22.25927290126366700, -57.11593263652586900 ) ) ; +#553 = EDGE_LOOP ( 'NONE', ( #2526, #3881, #4746, #2126 ) ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.8403673823290610500, -28.73779540003139500 ) ) ; +#555 = TOROIDAL_SURFACE ( 'NONE', #1349, 101.0000000000000000, 1.000000000000000000 ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( -9.177984551868054400E-013, 23.04995650018153700, -52.51745862830004800 ) ) ; +#557 = EDGE_CURVE ( 'NONE', #2212, #1762, #1630, .T. ) ; +#558 = ORIENTED_EDGE ( 'NONE', *, *, #1335, .T. ) ; +#559 = CARTESIAN_POINT ( 'NONE', ( 18.68103357078598800, 0.2698461651537628100, -26.96927033390468200 ) ) ; +#560 = EDGE_CURVE ( 'NONE', #1645, #4726, #3272, .T. ) ; +#561 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#562 = FACE_OUTER_BOUND ( 'NONE', #4985, .T. ) ; +#563 = ADVANCED_FACE ( 'NONE', ( #2566 ), #1498, .T. ) ; +#564 = AXIS2_PLACEMENT_3D ( 'NONE', #4592, #2167, #4989 ) ; +#565 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999945900, 9.474640789537163600, -56.37977905996591200 ) ) ; +#566 = CYLINDRICAL_SURFACE ( 'NONE', #2769, 1.000000000000000900 ) ; +#567 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#569 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.96533279648385000, -53.78041229006976200 ) ) ; +#570 = CARTESIAN_POINT ( 'NONE', ( 1.644654830215980500, 2.456343784043971900, -30.09591335161095000 ) ) ; +#571 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.22771491430602000, -23.40969935769455300 ) ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( 6.469469403132253000, 11.22186382465769900, -21.68459313844768100 ) ) ; +#573 = FACE_OUTER_BOUND ( 'NONE', #1463, .T. ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( 0.8844860364950316600, 7.964072047459825200, 17.99137691712869400 ) ) ; +#575 = AXIS2_PLACEMENT_3D ( 'NONE', #4632, #2206, #5028 ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 11.81382236340609600, -56.23255212013580000 ) ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 11.39507170863056000, -60.02698657250108000 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.93424423647692300, -28.10801246388829400 ) ) ; +#579 = CIRCLE ( 'NONE', #2209, 0.9999999999999998900 ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999997600, 19.85087708119872500, -53.92323202904130900 ) ) ; +#581 = VERTEX_POINT ( 'NONE', #3989 ) ; +#582 = AXIS2_PLACEMENT_3D ( 'NONE', #2830, #397, #3248 ) ; +#583 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( 15.72146375162935800, 10.00000000000000200, 17.68080317672135500 ) ) ; +#585 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000100, 0.1527587727723880000, -25.16812189306754600 ) ) ; +#586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025144100 ) ) ; +#587 = ORIENTED_EDGE ( 'NONE', *, *, #2750, .F. ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, 13.40741737109299000, -20.21665475151214500 ) ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999400, -10.00000000000000200, 7.500000000000000000 ) ) ; +#590 = VERTEX_POINT ( 'NONE', #4390 ) ; +#591 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, 12.65446821274872700, -55.06985442120483000 ) ) ; +#592 = ADVANCED_FACE ( 'NONE', ( #402 ), #4448, .T. ) ; +#593 = EDGE_CURVE ( 'NONE', #4740, #348, #3782, .T. ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( 0.7899356080872133000, -0.03903362755768556600, 17.56241685492030400 ) ) ; +#595 = ORIENTED_EDGE ( 'NONE', *, *, #4155, .F. ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( 2.462054868909296700, 20.85639684093798300, -53.39550203546200900 ) ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( 10.87205868850846900, 20.68049782767860000, -60.62853650564463200 ) ) ; +#598 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890706400, 0.2588190451025124100 ) ) ; +#599 = VERTEX_POINT ( 'NONE', #4819 ) ; +#600 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -1.505759517047136500, -23.64527242200718100 ) ) ; +#601 = AXIS2_PLACEMENT_3D ( 'NONE', #1965, #4795, #2375 ) ; +#602 = EDGE_CURVE ( 'NONE', #1303, #2592, #4583, .T. ) ; +#603 = ORIENTED_EDGE ( 'NONE', *, *, #3931, .F. ) ; +#604 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999600, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#605 = VERTEX_POINT ( 'NONE', #2796 ) ; +#606 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#607 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .T. ) ; +#608 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.900096669406584400, -27.98079825368007100 ) ) ; +#610 = FACE_OUTER_BOUND ( 'NONE', #2884, .T. ) ; +#611 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333330600, -3.683943226805107800, -0.9871096125845071300 ) ) ; +#612 = ORIENTED_EDGE ( 'NONE', *, *, #3589, .F. ) ; +#613 = CARTESIAN_POINT ( 'NONE', ( -2.076776773751338800E-014, 3.848119713664068400, 17.66360326263420400 ) ) ; +#614 = VERTEX_POINT ( 'NONE', #1135 ) ; +#615 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000100, 4.999999999999995600, -7.500000000000000900 ) ) ; +#617 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.90455139150839900, -56.82215133583471100 ) ) ; +#618 = TOROIDAL_SURFACE ( 'NONE', #3112, 9.000000000000001800, 1.000000000000000000 ) ; +#619 = AXIS2_PLACEMENT_3D ( 'NONE', #2429, #5253, #2821 ) ; +#620 = ORIENTED_EDGE ( 'NONE', *, *, #255, .T. ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( 17.44919999983619300, 11.65547649665042600, -55.60070005792064800 ) ) ; +#622 = CIRCLE ( 'NONE', #2877, 6.123724356957925600 ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, 10.18725245382018800, -57.60521002808774000 ) ) ; +#624 = ORIENTED_EDGE ( 'NONE', *, *, #3522, .F. ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.88990705086852300, -27.53877256284568600 ) ) ; +#625 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#627 = EDGE_CURVE ( 'NONE', #287, #2628, #5138, .T. ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999000, 19.85087708119871400, -53.92323202904127300 ) ) ; +#629 = CARTESIAN_POINT ( 'NONE', ( 17.43650001184191500, 19.78590545866230200, -53.68075463268518600 ) ) ; +#630 = VECTOR ( 'NONE', #5239, 1000.000000000000000 ) ; +#631 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.18129507813263500, -62.96121213358091500 ) ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999995800, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( 18.25374516978035500, 2.456343784046117300, -30.09591335160813600 ) ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( 13.71919885355490700, 10.00000000000000400, 19.44428600490173800 ) ) ; +#635 = LINE ( 'NONE', #3242, #2809 ) ; +#636 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.945553274780387200, 17.05399184765109800 ) ) ; +#637 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.86093283454192700, -53.49654541540397900 ) ) ; +#638 = EDGE_CURVE ( 'NONE', #1762, #1002, #3524, .T. ) ; +#639 = CIRCLE ( 'NONE', #2123, 2.500000000000000000 ) ; +#640 = CARTESIAN_POINT ( 'NONE', ( 18.89840000000000200, 11.39507170863056200, -60.02698657250109400 ) ) ; +#641 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4998, #1783, #2191 ), + ( #5016, #2600, #151 ), + ( #2994, #565, #3423 ), + ( #983, #3839, #1357 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0009065014181572397200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.3869539162915059900, 1.000000000000000000), + ( 1.000000000000000000, 0.3869143520434128500, 1.000000000000000000), + ( 1.000000000000000000, 0.3944532028975815700, 1.000000000000000000), + ( 1.000000000000000000, 0.4082482904638625700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#642 = FACE_OUTER_BOUND ( 'NONE', #3303, .T. ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 3.338646566912518000, -0.9726861608259505000, -24.60728393605859000 ) ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999999400, 12.73833325550376800, -27.37885710048672300 ) ) ; +#645 = AXIS2_PLACEMENT_3D ( 'NONE', #675, #2716, #3126 ) ; +#646 = TOROIDAL_SURFACE ( 'NONE', #645, 11.03553390593274000, 2.500000000000000000 ) ; +#648 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999981100, 10.00000000000000200, 15.31390237722991000 ) ) ; +#647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000002700, 11.39507170863056700, -60.02698657250110900 ) ) ; +#650 = CARTESIAN_POINT ( 'NONE', ( 13.55836569124362400, 4.999999999999991100, -23.15873341919385500 ) ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( 18.68693447853216200, 8.089255650988795000, 18.23223304703367400 ) ) ; +#652 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#653 = AXIS2_PLACEMENT_3D ( 'NONE', #1503, #2330, #275 ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.76821151113775700, -53.20895427849874400 ) ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 12.36099753491963100, -59.76816752739856800 ) ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333800, 21.66487829819825000, -53.52313491720788400 ) ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( 14.03532260836112600, 13.00383239966998500, -18.66140695500012800 ) ) ; +#658 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.82641490964391600, -27.24337617906121500 ) ) ; +#659 = EDGE_LOOP ( 'NONE', ( #1753, #4547 ) ) ; +#660 = ORIENTED_EDGE ( 'NONE', *, *, #3623, .T. ) ; +#661 = AXIS2_PLACEMENT_3D ( 'NONE', #4900, #2487, #27 ) ; +#662 = ORIENTED_EDGE ( 'NONE', *, *, #49, .T. ) ; +#663 = CARTESIAN_POINT ( 'NONE', ( 0.6814330470336378300, 5.000000000000000000, 18.23223304703364200 ) ) ; +#664 = ORIENTED_EDGE ( 'NONE', *, *, #3760, .T. ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 2.188901196876866900E-015, 4.227738737508539100, -29.39871417784497300 ) ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666600, 14.65750343616706400, -27.64626655298182800 ) ) ; +#667 = ORIENTED_EDGE ( 'NONE', *, *, #602, .T. ) ; +#668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#669 = EDGE_CURVE ( 'NONE', #4518, #4554, #514, .T. ) ; +#670 = ORIENTED_EDGE ( 'NONE', *, *, #4219, .F. ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338600300, 13.40741737109299300, -20.21665475151213800 ) ) ; +#672 = EDGE_CURVE ( 'NONE', #4371, #3755, #4680, .T. ) ; +#673 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#674 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#675 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 20.00000000000000000 ) ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.410321060556829900, -30.21984944025781400 ) ) ; +#677 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890699800, -0.2588190451025143000 ) ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( 6.139780994364802100, 12.97933755770451100, -18.56287200760088400 ) ) ; +#679 = ORIENTED_EDGE ( 'NONE', *, *, #1019, .F. ) ; +#680 = EDGE_CURVE ( 'NONE', #2668, #2252, #2452, .T. ) ; +#681 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.960747302179024500, 15.60882385647948000 ) ) ; +#682 = VERTEX_POINT ( 'NONE', #2439 ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( 11.50508989250510600, -9.999999999999994700, 12.55747424044638200 ) ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 2.675430021999143400, 3.721158669479565100, -28.58494261741446600 ) ) ; +#685 = FACE_OUTER_BOUND ( 'NONE', #2168, .T. ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 18.89840000000003800, 10.00000000000000200, 15.31390237722989800 ) ) ; +#687 = VERTEX_POINT ( 'NONE', #2054 ) ; +#688 = AXIS2_PLACEMENT_3D ( 'NONE', #2678, #1012, #1434 ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 20.96533279648385000, -53.78041229006976200 ) ) ; +#690 = CARTESIAN_POINT ( 'NONE', ( 6.469156200588089200, 11.22190382075199500, -21.68475368941364700 ) ) ; +#691 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, -0.04610471944049431700, 17.38587924348569700 ) ) ; +#692 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.896534461666313100, 16.90261481451889100 ) ) ; +#693 = FACE_OUTER_BOUND ( 'NONE', #483, .T. ) ; +#694 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#695 = ORIENTED_EDGE ( 'NONE', *, *, #44, .T. ) ; +#696 = CARTESIAN_POINT ( 'NONE', ( 6.281059892904346900, 21.14637369439371600, -59.57101422259540900 ) ) ; +#697 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.68416105771750900, -26.35571554925893500 ) ) ; +#698 = CARTESIAN_POINT ( 'NONE', ( 6.060024921257882700, -9.999999999999998200, 12.50000000327236200 ) ) ; +#699 = AXIS2_PLACEMENT_3D ( 'NONE', #4252, #1812, #4643 ) ; +#700 = CIRCLE ( 'NONE', #3917, 1.000000000000000700 ) ; +#701 = ORIENTED_EDGE ( 'NONE', *, *, #3466, .F. ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.529450976789583200, 16.50785938500322200 ) ) ; +#703 = DATE_AND_TIME ( #1779, #2868 ) ; +#704 = CARTESIAN_POINT ( 'NONE', ( 1.284465137943646000, 1.093223501019086700, -28.39632942612063400 ) ) ; +#705 = CIRCLE ( 'NONE', #4488, 5.000000000000000900 ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 19.49449540169506500, 4.999999999999924500, 17.99271596417261800 ) ) ; +#706 = CARTESIAN_POINT ( 'NONE', ( 3.760335911712779900, 0.3298365555256762000, -27.06954963716532700 ) ) ; +#708 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000200, 8.188159324039872900, -46.40088811065933100 ) ) ; +#709 = EDGE_CURVE ( 'NONE', #3226, #3338, #3664, .T. ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.62051269293463600, -55.34690196774872100 ) ) ; +#711 = TOROIDAL_SURFACE ( 'NONE', #3872, 5.123724356957928300, 1.000000000000000000 ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( 8.442293847273667500, 12.83009403230417100, -17.95703106831818400 ) ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( 19.47346483513791400, 3.823266477490726800, 17.96142317284905600 ) ) ; +#714 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2898, #2505, #3566, #1126, #3981, #1543, #4382, #1939, #4775, #2350 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005592429056310436200, 0.001118485811262087200, 0.001677728716893130900, 0.002236971622524174500 ), + .UNSPECIFIED. ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, 1.106980960592397300, -25.38709466269170500 ) ) ; +#716 = AXIS2_PLACEMENT_3D ( 'NONE', #992, #3846, #1413 ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( 1.529371471185448300, 10.00000000000000400, 17.89504286779637000 ) ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991400, 12.71990475239428000, -55.31406691187638100 ) ) ; +#719 = EDGE_CURVE ( 'NONE', #3366, #2425, #1358, .T. ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( -7.109058195563463600E-013, 14.55024527675054800, -23.81522183301654400 ) ) ; +#721 = CYLINDRICAL_SURFACE ( 'NONE', #2983, 0.9999999999999995600 ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( 10.77445232676262800, -9.999999999999998200, 16.92315235817421000 ) ) ; +#723 = CARTESIAN_POINT ( 'NONE', ( 7.868535311230778500, 24.91703333055815500, -59.29810621713835400 ) ) ; +#724 = TOROIDAL_SURFACE ( 'NONE', #3014, 5.123724356957928300, 1.000000000000000000 ) ; +#725 = AXIS2_PLACEMENT_3D ( 'NONE', #4589, #2162, #4986 ) ; +#726 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#728 = DIRECTION ( 'NONE', ( 2.580773553939889600E-016, -1.902975585336759300E-037, 1.000000000000000000 ) ) ; +#727 = CARTESIAN_POINT ( 'NONE', ( 4.296494888548673800, -1.323338017687927000, -23.97177630631566100 ) ) ; +#729 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -4.999999999999999100, 16.50000000000000000 ) ) ; +#730 = VERTEX_POINT ( 'NONE', #846 ) ; +#731 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, 4.999999999999997300, 7.499999999999996400 ) ) ; +#732 = CARTESIAN_POINT ( 'NONE', ( 10.40433596162771800, 13.37865667511755800, -20.22429415188955600 ) ) ; +#733 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 7.709269841782330900, 16.93242356500261900 ) ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.000000000000014200, 15.50302343377306800 ) ) ; +#735 = ORIENTED_EDGE ( 'NONE', *, *, #4126, .T. ) ; +#736 = AXIS2_PLACEMENT_3D ( 'NONE', #1564, #358, #2398 ) ; +#737 = CARTESIAN_POINT ( 'NONE', ( 2.896369226114165100, 10.00000000000000200, 19.05609596949506100 ) ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000001300, 20.68991880571508800, -52.91676192399935300 ) ) ; +#739 = ORIENTED_EDGE ( 'NONE', *, *, #2432, .T. ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( 14.61642707707597200, -4.999999999999999100, 17.50000000000000000 ) ) ; +#741 = CARTESIAN_POINT ( 'NONE', ( 7.838712068819812200, 23.69309560745766800, -63.86447340393698400 ) ) ; +#742 = VERTEX_POINT ( 'NONE', #1244 ) ; +#743 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( 18.25628178467634300, 11.11083755258378500, -56.67051051173103800 ) ) ; +#745 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#746 = ORIENTED_EDGE ( 'NONE', *, *, #627, .T. ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.501609746981069000, -31.74485237234840800 ) ) ; +#747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025177400, 0.9659258262890690900 ) ) ; +#749 = ORIENTED_EDGE ( 'NONE', *, *, #2910, .T. ) ; +#750 = CARTESIAN_POINT ( 'NONE', ( 2.878132188134543400, 10.00000000000000400, 16.46446609406728400 ) ) ; +#751 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.999999999999989300, 5.665249758739323100 ) ) ; +#752 = EDGE_CURVE ( 'NONE', #3066, #3755, #4484, .T. ) ; +#753 = EDGE_CURVE ( 'NONE', #763, #4518, #268, .T. ) ; +#754 = DIRECTION ( 'NONE', ( 0.6859943405700380500, 0.0000000000000000000, 0.7276068751089962400 ) ) ; +#755 = ORIENTED_EDGE ( 'NONE', *, *, #1652, .F. ) ; +#756 = CARTESIAN_POINT ( 'NONE', ( 6.520920705025861100, 10.00000000000000400, 19.72725162754831600 ) ) ; +#757 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 23.06396930162842200, -53.00858017148790700 ) ) ; +#758 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1839, #4671, #2251 ), + ( #5071, #2648, #204 ), + ( #3052, #621, #3484 ), + ( #1044, #3901, #1462 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.007460220593847865000, 0.008475508232904339600 ), + ( 0.4660998205150167500, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.8542265893537599500, 0.8436242579055621700, 1.000000000000000000), + ( 0.8565869061134394600, 0.8461562442481780400, 1.000000000000000000), + ( 0.8577835393157720000, 0.8474399104819585500, 1.000000000000000000), + ( 0.8577841975454647500, 0.8474406165857413200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#759 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#760 = CARTESIAN_POINT ( 'NONE', ( 10.17566486773436200, 20.63018611626080600, -60.69736630410579900 ) ) ; +#761 = LINE ( 'NONE', #95, #2903 ) ; +#762 = ORIENTED_EDGE ( 'NONE', *, *, #2635, .F. ) ; +#763 = VERTEX_POINT ( 'NONE', #3296 ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 19.64755997124529700, 1.302157558565659500, -29.04913052172699800 ) ) ; +#765 = CIRCLE ( 'NONE', #1231, 101.4290542974443500 ) ; +#766 = CARTESIAN_POINT ( 'NONE', ( 3.717737073514467500, 2.531661164253960800, -26.54798005763000300 ) ) ; +#767 = ORIENTED_EDGE ( 'NONE', *, *, #4682, .F. ) ; +#768 = PLANE ( 'NONE', #2841 ) ; +#769 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890705300, 0.2588190451025125800 ) ) ; +#770 = AXIS2_PLACEMENT_3D ( 'NONE', #4358, #1918, #4747 ) ; +#771 = CARTESIAN_POINT ( 'NONE', ( 18.25379114671066100, 21.78010405873150300, -53.77928046476206000 ) ) ; +#772 = ORIENTED_EDGE ( 'NONE', *, *, #1910, .T. ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 13.77489008581955700, -26.94531476495734200 ) ) ; +#774 = DIRECTION ( 'NONE', ( -8.979589471384521200E-016, 0.2588190451025122500, -0.9659258262890706400 ) ) ; +#775 = CIRCLE ( 'NONE', #1287, 2.500000000000000900 ) ; +#776 = PLANE ( 'NONE', #933 ) ; +#777 = CARTESIAN_POINT ( 'NONE', ( 10.67731121756205300, 25.69659779327453100, -59.35626766266767600 ) ) ; +#778 = ADVANCED_FACE ( 'NONE', ( #4353 ), #4507, .T. ) ; +#779 = AXIS2_PLACEMENT_3D ( 'NONE', #152, #2995, #567 ) ; +#780 = FACE_OUTER_BOUND ( 'NONE', #4438, .T. ) ; +#781 = CIRCLE ( 'NONE', #1597, 4.000000000000000000 ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( 16.13806408828600800, 0.3298365555283848100, -27.06954963716395600 ) ) ; +#783 = LINE ( 'NONE', #215, #4956 ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( 6.813375535309435600, -5.394672529419866100, 17.50791350180404700 ) ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 6.182485924565429300, 17.15619054393200600 ) ) ; +#786 = EDGE_CURVE ( 'NONE', #5113, #2568, #3203, .T. ) ; +#787 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4407, #4026, #5222, #2794 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.942281208919283300E-018, 0.0008417482326425274400 ), + .UNSPECIFIED. ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 22.10440236979573200, -56.53794800095078400 ) ) ; +#789 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#790 = FACE_OUTER_BOUND ( 'NONE', #1448, .T. ) ; +#791 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 13.22771491430602400, -23.40969935769457100 ) ) ; +#792 = DIRECTION ( 'NONE', ( 1.325001034533938900E-016, -1.625531029949085900E-016, -1.000000000000000000 ) ) ; +#793 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1916, #4876, ( #5242 ) ) ; +#794 = CARTESIAN_POINT ( 'NONE', ( 18.43701686998207400, 22.38821919015251200, -54.89168058720761000 ) ) ; +#795 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000002700, 11.39507170863056700, -60.02698657250110900 ) ) ; +#796 = EDGE_CURVE ( 'NONE', #4015, #864, #3271, .T. ) ; +#797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( 13.76120354341337300, 24.04533744470587900, -62.84339082677231400 ) ) ; +#799 = EDGE_LOOP ( 'NONE', ( #1309, #4258, #531 ) ) ; +#800 = VERTEX_POINT ( 'NONE', #2979 ) ; +#801 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#802 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -9.184850993605144000E-016, 12.49999999999999600 ) ) ; +#803 = ADVANCED_FACE ( 'NONE', ( #1243 ), #4214, .F. ) ; +#804 = VERTEX_POINT ( 'NONE', #5014 ) ; +#805 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#806 = VERTEX_POINT ( 'NONE', #2598 ) ; +#807 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 8.188159324039874700, -46.40088811065933100 ) ) ; +#809 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.68991880571496700, -52.91676192399938800 ) ) ; +#810 = AXIS2_PLACEMENT_3D ( 'NONE', #2412, #5235, #2808 ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 17.30787005038036600, 8.199465170493697400, 19.48531161694414100 ) ) ; +#812 = CARTESIAN_POINT ( 'NONE', ( 10.40171725973505100, 11.02205614447035300, -20.85581036584120800 ) ) ; +#813 = ORIENTED_EDGE ( 'NONE', *, *, #4011, .T. ) ; +#814 = CARTESIAN_POINT ( 'NONE', ( 0.9599712615026145800, 9.999999999999962700, 15.61465486670721600 ) ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( 14.56311655253536100, 21.19049664796236200, -58.92276035608075800 ) ) ; +#816 = ORIENTED_EDGE ( 'NONE', *, *, #526, .T. ) ; +#817 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #3897 ) ; +#818 = ORIENTED_EDGE ( 'NONE', *, *, #4758, .T. ) ; +#819 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1924, #4755, #3140, #710 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009065014181572781000 ), + .UNSPECIFIED. ) ; +#820 = EDGE_CURVE ( 'NONE', #3302, #3144, #2174, .T. ) ; +#821 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#822 = CARTESIAN_POINT ( 'NONE', ( 18.89840000000003800, 10.00000000000000200, 15.31390237722989800 ) ) ; +#823 = ORIENTED_EDGE ( 'NONE', *, *, #3592, .T. ) ; +#824 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #3262 ) ; +#825 = EDGE_CURVE ( 'NONE', #1577, #1527, #1106, .T. ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( 1.278632108506236000, 14.40543151798575600, -24.35419189932357800 ) ) ; +#827 = CARTESIAN_POINT ( 'NONE', ( 18.55963078396386800, 10.00000000000000200, 15.43435067612545100 ) ) ; +#828 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000600, -0.6815329890154363500, 16.50000000000000400 ) ) ; +#829 = VECTOR ( 'NONE', #1323, 1000.000000000000000 ) ; +#830 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#831 = EDGE_LOOP ( 'NONE', ( #471, #2032, #40, #3008 ) ) ; +#832 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.391663898160555100, 16.63498795240969500 ) ) ; +#833 = ADVANCED_FACE ( 'NONE', ( #3130 ), #2307, .T. ) ; +#834 = AXIS2_PLACEMENT_3D ( 'NONE', #1879, #4710, #2291 ) ; +#835 = LINE ( 'NONE', #4602, #4761 ) ; +#836 = VERTEX_POINT ( 'NONE', #2208 ) ; +#837 = FACE_OUTER_BOUND ( 'NONE', #553, .T. ) ; +#838 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 14.19364074059509300, -23.15088031259205400 ) ) ; +#839 = DIRECTION ( 'NONE', ( -3.469446951953615000E-015, -0.2588190451025145200, 0.9659258262890700900 ) ) ; +#840 = PERSON_AND_ORGANIZATION ( #4449, #3515 ) ; +#841 = AXIS2_PLACEMENT_3D ( 'NONE', #3927, #1493, #4329 ) ; +#842 = APPROVAL_ROLE ( '' ) ; +#843 = CIRCLE ( 'NONE', #3383, 2.500000000000000000 ) ; +#844 = CARTESIAN_POINT ( 'NONE', ( 14.80690960927239900, 13.08159679329258500, -64.89911168032358500 ) ) ; +#845 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824611300, 14.11082393428809700, -60.50305359653262400 ) ) ; +#846 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666667400, 11.07935950138772100, -56.35951613027771900 ) ) ; +#847 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#848 = TOROIDAL_SURFACE ( 'NONE', #1151, 102.4994838187113800, 2.500000000000000000 ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( 5.169442501923183100, 10.00000000000000400, 18.57234609069941900 ) ) ; +#850 = FACE_OUTER_BOUND ( 'NONE', #3701, .T. ) ; +#851 = EDGE_CURVE ( 'NONE', #2659, #1644, #5156, .T. ) ; +#852 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.68419134898026400, -26.35594734569464100 ) ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.81382236340626200, -56.23255212013582800 ) ) ; +#854 = CYLINDRICAL_SURFACE ( 'NONE', #1142, 7.499999999999998200 ) ; +#855 = ADVANCED_FACE ( 'NONE', ( #5 ), #1932, .T. ) ; +#856 = EDGE_CURVE ( 'NONE', #1609, #4608, #2987, .T. ) ; +#857 = CARTESIAN_POINT ( 'NONE', ( 9.259422164945769800, 14.86366791372610600, -66.57725131210978000 ) ) ; +#858 = CARTESIAN_POINT ( 'NONE', ( 14.57443022961196300, 13.21577702381711300, -65.08287420468494100 ) ) ; +#859 = ORIENTED_EDGE ( 'NONE', *, *, #3631, .F. ) ; +#860 = AXIS2_PLACEMENT_3D ( 'NONE', #1860, #1361, #110 ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 14.91745271275654400, -0.3217414304120303500, -25.79956990190623900 ) ) ; +#862 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#863 = ORIENTED_EDGE ( 'NONE', *, *, #5125, .F. ) ; +#864 = VERTEX_POINT ( 'NONE', #5051 ) ; +#865 = ORIENTED_EDGE ( 'NONE', *, *, #1991, .F. ) ; +#866 = AXIS2_PLACEMENT_3D ( 'NONE', #2978, #3820, #1386 ) ; +#867 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -8.074441630149902200, -13.39944000404294900 ) ) ; +#868 = VERTEX_POINT ( 'NONE', #3460 ) ; +#869 = DIRECTION ( 'NONE', ( -1.325001034533938900E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#870 = CARTESIAN_POINT ( 'NONE', ( 4.858319312702753300, 12.94713918839683100, -64.70067013313899900 ) ) ; +#871 = ORIENTED_EDGE ( 'NONE', *, *, #5087, .F. ) ; +#872 = CARTESIAN_POINT ( 'NONE', ( 11.75024300564916200, 15.26628455736954100, -61.91092052998863000 ) ) ; +#873 = VERTEX_POINT ( 'NONE', #3032 ) ; +#874 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 10.24015223986378400, -55.71676843641289900 ) ) ; +#875 = CARTESIAN_POINT ( 'NONE', ( 11.51268586217466300, 11.05894550257052000, -21.01294121286782600 ) ) ; +#876 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -1.457153238772571200, 17.50000000000000000 ) ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 9.154085150328953100, -46.14206906555681100 ) ) ; +#878 = ADVANCED_FACE ( 'NONE', ( #850 ), #758, .T. ) ; +#879 = ORIENTED_EDGE ( 'NONE', *, *, #3692, .T. ) ; +#880 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #163, #1418, #2221 ), + ( #5044, #2625, #181 ), + ( #3026, #596, #3454 ), + ( #1015, #3873, #1436 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.005899743711341264400, 0.006909770291284466100 ), + ( 0.0000000000000000000, 0.5339001794849789200 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8474406165857443200, 0.8577841975454663100), + ( 1.000000000000000000, 0.8474399275378454700, 0.8577835552152622800), + ( 1.000000000000000000, 0.8461752623542611000, 0.8566046347851017400), + ( 1.000000000000000000, 0.8436242579055652800, 0.8542265893537615000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#881 = VECTOR ( 'NONE', #1739, 1000.000000000000000 ) ; +#882 = EDGE_CURVE ( 'NONE', #4513, #599, #361, .T. ) ; +#883 = VERTEX_POINT ( 'NONE', #2271 ) ; +#884 = ORIENTED_EDGE ( 'NONE', *, *, #3475, .F. ) ; +#885 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( -1.357251350917184000E-012, 23.12836723210051200, -55.42069092724439400 ) ) ; +#887 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5122, #236, #2693 ), + ( #257, #1571, #2607 ), + ( #160, #3002, #574 ), + ( #3434, #995, #3849 ), + ( #1416, #4249, #1810 ), + ( #4641, #2217, #5042 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001109630065227890700, 0.002219260130455781400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7860350693180036000, 1.000000000000000000), + ( 1.000000000000000000, 0.7779990704731953900, 1.000000000000000000), + ( 1.000000000000000000, 0.7699843687026771700, 1.000000000000000000), + ( 1.000000000000000000, 0.7542976144073548800, 1.000000000000000000), + ( 1.000000000000000000, 0.7465652174045487300, 1.000000000000000000), + ( 1.000000000000000000, 0.7392767051441396800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#888 = FACE_OUTER_BOUND ( 'NONE', #103, .T. ) ; +#889 = AXIS2_PLACEMENT_3D ( 'NONE', #1547, #316, #4384 ) ; +#890 = EDGE_CURVE ( 'NONE', #3437, #1589, #5012, .T. ) ; +#891 = ORIENTED_EDGE ( 'NONE', *, *, #753, .T. ) ; +#892 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, 19.65596328590102000, -53.19380947054323600 ) ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 10.06660754054033500, 9.973271821904823800, -63.55883711144641500 ) ) ; +#894 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143000, 0.9659258262890700900 ) ) ; +#895 = CYLINDRICAL_SURFACE ( 'NONE', #5152, 0.9999999999999995600 ) ; +#896 = CARTESIAN_POINT ( 'NONE', ( 14.58396216939197700, 13.06692204091774900, -18.91257844827815400 ) ) ; +#897 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -9.000000000000005300, -7.499999999999996400 ) ) ; +#898 = ORIENTED_EDGE ( 'NONE', *, *, #2462, .T. ) ; +#899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025151900 ) ) ; +#900 = LINE ( 'NONE', #2023, #1848 ) ; +#901 = CIRCLE ( 'NONE', #1035, 3.964466094067293800 ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( 1.644622171036539400, 21.78003448952056700, -53.77912581326671700 ) ) ; +#903 = ADVANCED_FACE ( 'NONE', ( #4108 ), #721, .T. ) ; +#904 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 18.09635858759372700, -61.37627564304205000 ) ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 20.68991880571509900, -52.91676192399936700 ) ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( 8.737807377618601400, 14.77270140274349900, -66.51994631477995800 ) ) ; +#907 = TOROIDAL_SURFACE ( 'NONE', #3795, 11.03553390593274000, 2.500000000000000000 ) ; +#908 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #648, #3508, #1071, #3921, #1488, #4322, #1884, #4713, #2294, #5119 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0009017811813957505700, 0.001803562362791501100, 0.002705343544187251500, 0.003607124725583002300 ), + .UNSPECIFIED. ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#910 = TOROIDAL_SURFACE ( 'NONE', #4561, 101.0000000000000000, 1.000000000000000000 ) ; +#911 = EDGE_CURVE ( 'NONE', #1644, #292, #1791, .T. ) ; +#912 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5115, #3997, #4788, #2369, #5191, #2760, #327, #3175, #744, #3600 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0009411665211681553000, 0.001882333042336310600, 0.002823499563504465900, 0.003764666084672621200 ), + .UNSPECIFIED. ) ; +#913 = AXIS2_PLACEMENT_3D ( 'NONE', #5098, #2677, #235 ) ; +#914 = EDGE_CURVE ( 'NONE', #2104, #4074, #3978, .T. ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999500, 6.489201192633197800, 1.738776219089098100 ) ) ; +#916 = ORIENTED_EDGE ( 'NONE', *, *, #5158, .T. ) ; +#917 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#918 = ORIENTED_EDGE ( 'NONE', *, *, #2056, .F. ) ; +#919 = CARTESIAN_POINT ( 'NONE', ( 7.507712287570171000, 15.04509884789114300, -61.77456484798062800 ) ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( 5.705548109699550200, 14.32486865794716900, -61.04118221942190600 ) ) ; +#921 = ORIENTED_EDGE ( 'NONE', *, *, #4184, .T. ) ; +#922 = CARTESIAN_POINT ( 'NONE', ( 16.18066292648554200, 2.531661164253976800, -26.54798005763003100 ) ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( 7.534435431306454100E-016, 19.91601454391053500, -54.16632834935792600 ) ) ; +#924 = CARTESIAN_POINT ( 'NONE', ( 7.279022321579313700, 23.80782873407221700, -63.59304148676447700 ) ) ; +#925 = VERTEX_POINT ( 'NONE', #3089 ) ; +#926 = ADVANCED_FACE ( 'NONE', ( #4901 ), #1311, .T. ) ; +#927 = ORIENTED_EDGE ( 'NONE', *, *, #2521, .T. ) ; +#928 = ORIENTED_EDGE ( 'NONE', *, *, #4977, .T. ) ; +#929 = AXIS2_PLACEMENT_3D ( 'NONE', #4774, #3565, #728 ) ; +#930 = ORIENTED_EDGE ( 'NONE', *, *, #2976, .T. ) ; +#931 = CARTESIAN_POINT ( 'NONE', ( 3.903127820947816000E-015, 1.320581149576789400, -31.07156646030474100 ) ) ; +#932 = CARTESIAN_POINT ( 'NONE', ( 6.798104997968134300, 11.40730665197462000, -62.48316656635245900 ) ) ; +#933 = AXIS2_PLACEMENT_3D ( 'NONE', #3214, #1605, #4445 ) ; +#934 = CARTESIAN_POINT ( 'NONE', ( 11.76613416276820200, 15.27276440880524800, -61.91606071243951700 ) ) ; +#935 = ORIENTED_EDGE ( 'NONE', *, *, #3004, .F. ) ; +#936 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999400, 3.656246553858022900, -30.77515184652431300 ) ) ; +#937 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.266997467134911100, -12.80949600363865300 ) ) ; +#938 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 11.81594603346367300, 23.65033651208946400, -63.95667449009932400 ) ) ; +#940 = CIRCLE ( 'NONE', #5084, 7.500000000000002700 ) ; +#941 = ORIENTED_EDGE ( 'NONE', *, *, #3513, .T. ) ; +#942 = EDGE_CURVE ( 'NONE', #227, #3220, #912, .T. ) ; +#943 = EDGE_CURVE ( 'NONE', #2761, #1645, #2746, .T. ) ; +#944 = LINE ( 'NONE', #23, #2965 ) ; +#945 = ORIENTED_EDGE ( 'NONE', *, *, #672, .T. ) ; +#946 = ORIENTED_EDGE ( 'NONE', *, *, #3208, .F. ) ; +#947 = ADVANCED_FACE ( 'NONE', ( #1681 ), #3926, .T. ) ; +#948 = EDGE_CURVE ( 'NONE', #2702, #2700, #2322, .T. ) ; +#949 = CIRCLE ( 'NONE', #2005, 0.9999999999999995600 ) ; +#950 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.674647099076124400, -30.76687062793724800 ) ) ; +#951 = LOCAL_TIME ( 15, 6, 45.00000000000000000, #2050 ) ; +#952 = CARTESIAN_POINT ( 'NONE', ( 2.449970172387137400, 3.424630570335661900, -30.32056799807970600 ) ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, 12.50000000000000200 ) ) ; +#954 = FACE_BOUND ( 'NONE', #4467, .T. ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000094700, 0.8403673823269189900, -28.73779540001708100 ) ) ; +#956 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766149900, 24.01142209705481200, -59.79133915250319100 ) ) ; +#957 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#958 = CARTESIAN_POINT ( 'NONE', ( 5.694225306450531900, 11.33325360182495700, -22.12603918271454600 ) ) ; +#959 = AXIS2_PLACEMENT_3D ( 'NONE', #3944, #1510, #4349 ) ; +#960 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976806900E-015, 23.06396930162841500, -53.00858017148789300 ) ) ; +#961 = FACE_OUTER_BOUND ( 'NONE', #799, .T. ) ; +#962 = DIRECTION ( 'NONE', ( 0.09921409459785023000, 0.4173950502300301000, -0.9032928293065319900 ) ) ; +#963 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#964 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #985, #2613, #5031, #170, #3015, #584, #3445, #1005 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.001260252024230947400, 0.002592869691166962900, 0.003925487358102977900, 0.006590722691975008800 ), + .UNSPECIFIED. ) ; +#965 = CARTESIAN_POINT ( 'NONE', ( 1.514840177793672000, 22.23780564647226400, -54.62454003124185000 ) ) ; +#966 = FACE_OUTER_BOUND ( 'NONE', #2835, .T. ) ; +#967 = DIRECTION ( 'NONE', ( -4.489794735692287200E-016, -0.2588190451025128000, 0.9659258262890706400 ) ) ; +#968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#969 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.5899440004042954000, 0.8074441630149895600 ) ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.453153651174797100, -28.69439502806256600 ) ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 16.50000000000000000 ) ) ; +#972 = ADVANCED_FACE ( 'NONE', ( #3721 ), #1559, .T. ) ; +#973 = MANIFOLD_SOLID_BREP ( 'Fillet12', #1844 ) ; +#974 = VERTEX_POINT ( 'NONE', #1305 ) ; +#975 = EDGE_CURVE ( 'NONE', #1263, #1823, #3835, .T. ) ; +#976 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.68991880571509500, -52.91676192399936000 ) ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.86894087285330600, -27.86429699293980300 ) ) ; +#978 = VERTEX_POINT ( 'NONE', #897 ) ; +#979 = AXIS2_PLACEMENT_3D ( 'NONE', #1789, #4625, #2199 ) ; +#980 = EDGE_CURVE ( 'NONE', #4035, #1303, #457, .T. ) ; +#981 = ORIENTED_EDGE ( 'NONE', *, *, #2687, .F. ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -9.000000000000005300, -7.499999999999995600 ) ) ; +#983 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 11.07935950138770300, -56.35951613027766200 ) ) ; +#984 = ORIENTED_EDGE ( 'NONE', *, *, #1129, .T. ) ; +#985 = CARTESIAN_POINT ( 'NONE', ( 13.02604764182589700, 10.00000000000000400, 19.99999999999995000 ) ) ; +#986 = ORIENTED_EDGE ( 'NONE', *, *, #4404, .T. ) ; +#987 = CARTESIAN_POINT ( 'NONE', ( 19.12124799945071300, 9.591266553234879300, 16.73302968479690000 ) ) ; +#988 = AXIS2_PLACEMENT_3D ( 'NONE', #909, #3345, #3749 ) ; +#989 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025126900, 0.9659258262890705300 ) ) ; +#990 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#991 = EDGE_LOOP ( 'NONE', ( #83, #4913, #4628, #1895 ) ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 3.674647099076123500, -30.76687062793725100 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( 7.085435083569052500, 11.15305208521031600, -21.40517961927373800 ) ) ; +#994 = VERTEX_POINT ( 'NONE', #4549 ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( 0.6657182141872509700, 10.00000000000000000, 17.52842579294539500 ) ) ; +#996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9853853318533063500, -0.1703400944239179500 ) ) ; +#997 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#998 = ORIENTED_EDGE ( 'NONE', *, *, #980, .F. ) ; +#999 = AXIS2_PLACEMENT_3D ( 'NONE', #773, #3625, #1187 ) ; +#1000 = ADVANCED_FACE ( 'NONE', ( #573 ), #1422, .F. ) ; +#1001 = VECTOR ( 'NONE', #4558, 999.9999999999998900 ) ; +#1002 = VERTEX_POINT ( 'NONE', #4165 ) ; +#1003 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1004 = EDGE_LOOP ( 'NONE', ( #2893, #415, #1225, #1705 ) ) ; +#1005 = CARTESIAN_POINT ( 'NONE', ( 17.02026781186545500, 10.00000000000000400, 16.46446609406728000 ) ) ; +#1006 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000300, -0.6835232199033654000, -24.65261298917798900 ) ) ; +#1007 = VECTOR ( 'NONE', #5151, 1000.000000000000000 ) ; +#1008 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1009 = ORIENTED_EDGE ( 'NONE', *, *, #4362, .T. ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -9.000000000000000000, 12.50000000000000200 ) ) ; +#1011 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1012 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.08428789104291215000, 16.58738360076446500 ) ) ; +#1014 = FACE_OUTER_BOUND ( 'NONE', #2192, .T. ) ; +#1015 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999998100, 19.85087708119873200, -53.92323202904131600 ) ) ; +#1016 = EDGE_CURVE ( 'NONE', #5060, #5114, #178, .T. ) ; +#1017 = VERTEX_POINT ( 'NONE', #4578 ) ; +#1018 = CARTESIAN_POINT ( 'NONE', ( 10.18326013871221600, 20.63028186734575800, -60.69723830286977100 ) ) ; +#1019 = EDGE_CURVE ( 'NONE', #3220, #3164, #3819, .T. ) ; +#1020 = LINE ( 'NONE', #4440, #3191 ) ; +#1021 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1022 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1023 = CIRCLE ( 'NONE', #601, 101.0000000000000000 ) ; +#1024 = AXIS2_PLACEMENT_3D ( 'NONE', #477, #3331, #899 ) ; +#1025 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.36099753491963900, -59.76816752739859600 ) ) ; +#1026 = LINE ( 'NONE', #2327, #4270 ) ; +#1027 = ORIENTED_EDGE ( 'NONE', *, *, #4553, .T. ) ; +#1028 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 18.09635858759372700, -67.49999999999997200 ) ) ; +#1029 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1030 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#1031 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1032 = FACE_OUTER_BOUND ( 'NONE', #4180, .T. ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 10.18804067014304600, -45.86502151901292700 ) ) ; +#1034 = CARTESIAN_POINT ( 'NONE', ( 0.4034158158466218900, 4.633714465726768600, 17.99332407199065300 ) ) ; +#1035 = AXIS2_PLACEMENT_3D ( 'NONE', #3999, #1558, #4397 ) ; +#1036 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666664100, 2.612651188657571000, -30.32807655698927400 ) ) ; +#1037 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1038 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000600, 10.18736786926470300, -57.60542145968683800 ) ) ; +#1040 = CIRCLE ( 'NONE', #189, 1.000000000000000000 ) ; +#1041 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#1042 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1115, #4368, #2739 ), + ( #302, #3146, #718 ), + ( #3576, #1136, #3990 ), + ( #1551, #4391, #1950 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.008475508232904441900, 0.009486132116794448700 ), + ( 0.4660998205150201400, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.8577841975454652000, 0.8474406165857428800, 1.000000000000000000), + ( 0.8577857440425169500, 0.8474422755619790400, 1.000000000000000000), + ( 0.8565832154156063400, 0.8461522851200369300, 1.000000000000000000), + ( 0.8542265893537605000, 0.8436242579055639500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1043 = DIRECTION ( 'NONE', ( -0.1006687319876466600, 0.2575042443533918600, -0.9610189230915218200 ) ) ; +#1044 = CARTESIAN_POINT ( 'NONE', ( 18.26309118210493700, 10.87154677662163300, -55.54758678018318100 ) ) ; +#1045 = ORIENTED_EDGE ( 'NONE', *, *, #468, .F. ) ; +#1046 = AXIS2_PLACEMENT_3D ( 'NONE', #4241, #1802, #4634 ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( 5.323969770388291800, 24.17636548788712500, -62.14599337717082500 ) ) ; +#1048 = CARTESIAN_POINT ( 'NONE', ( 1.612108379068953000, 11.11882587481457900, -56.92493183722264400 ) ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.900096669412596500, -27.98079825368812100 ) ) ; +#1050 = ORIENTED_EDGE ( 'NONE', *, *, #3817, .F. ) ; +#1051 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 19.72126664952463000, -53.43752494149173100 ) ) ; +#1052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025122500, 0.9659258262890707500 ) ) ; +#1053 = ORIENTED_EDGE ( 'NONE', *, *, #3210, .T. ) ; +#1054 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, 8.881784197001252300E-016, 1.000000000000000000 ) ) ; +#1055 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.109329872320524500, -29.69677348922341400 ) ) ; +#1056 = EDGE_CURVE ( 'NONE', #2212, #2145, #3597, .T. ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( 15.54470486524169500, 9.999999999999614500, 20.17822030807748100 ) ) ; +#1058 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.804772097074494900, 17.53238811383921500 ) ) ; +#1059 = ORIENTED_EDGE ( 'NONE', *, *, #2553, .T. ) ; +#1060 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766148800, 14.59610964385531100, -62.31416452082462600 ) ) ; +#1061 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 12.36099753491963100, -59.76816752739857500 ) ) ; +#1062 = ORIENTED_EDGE ( 'NONE', *, *, #4541, .F. ) ; +#1063 = DIRECTION ( 'NONE', ( 7.151436301233003800E-015, 0.2588190451025200200, -0.9659258262890686500 ) ) ; +#1064 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #840, #2467, ( #5242 ) ) ; +#1065 = EDGE_CURVE ( 'NONE', #883, #763, #2610, .T. ) ; +#1066 = VERTEX_POINT ( 'NONE', #1324 ) ; +#1067 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, -1.505759517047136500, -23.64527242200717400 ) ) ; +#1068 = ORIENTED_EDGE ( 'NONE', *, *, #2854, .F. ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 19.35923699728373400, 7.848783069637248900, 17.80887397500196200 ) ) ; +#1071 = CARTESIAN_POINT ( 'NONE', ( 0.9166800491542628200, 9.948200321519625100, 15.90957673458506100 ) ) ; +#1070 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 17.50000000000000000 ) ) ; +#1072 = EDGE_LOOP ( 'NONE', ( #140, #5278, #1372, #2771 ) ) ; +#1073 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1074 = DIRECTION ( 'NONE', ( 1.325001034533938900E-016, -1.625531029949085900E-016, -1.000000000000000000 ) ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( 17.02026781186548700, 10.00000000000000200, 16.46446609406731200 ) ) ; +#1076 = EDGE_LOOP ( 'NONE', ( #30, #1887, #91, #4129 ) ) ; +#1077 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 22.50000000000004300 ) ) ; +#1078 = VERTEX_POINT ( 'NONE', #937 ) ; +#1079 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, 12.93374564363919400, -28.10814606143651800 ) ) ; +#1080 = CARTESIAN_POINT ( 'NONE', ( 12.90247739297571000, 12.90702868440302200, -18.27135574031449700 ) ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( 1.689148147407818300, 14.53774733546802800, -27.10065340886238200 ) ) ; +#1082 = CIRCLE ( 'NONE', #549, 1.000000000000000900 ) ; +#1083 = AXIS2_PLACEMENT_3D ( 'NONE', #1615, #4453, #2016 ) ; +#1084 = ORIENTED_EDGE ( 'NONE', *, *, #3304, .F. ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999999400, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1086 = FACE_OUTER_BOUND ( 'NONE', #4912, .T. ) ; +#1087 = EDGE_LOOP ( 'NONE', ( #1397, #4454, #1808, #3536 ) ) ; +#1088 = DIRECTION ( 'NONE', ( 1.767592490299032100E-015, 0.9077716748210472600, 0.4194646426012456600 ) ) ; +#1089 = EDGE_CURVE ( 'NONE', #1130, #3309, #3451, .T. ) ; +#1090 = CIRCLE ( 'NONE', #359, 1.000000000000000900 ) ; +#1091 = CARTESIAN_POINT ( 'NONE', ( 3.790588346983094800, 13.30592283846826100, -19.83787199906617700 ) ) ; +#1092 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766140300, 13.40741737109299000, -20.21665475151214500 ) ) ; +#1093 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1094 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 14.50935294783794800, -26.81835075481546600 ) ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.36099753491963900, -59.76816752739859600 ) ) ; +#1096 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1097 = EDGE_CURVE ( 'NONE', #153, #4601, #328, .T. ) ; +#1098 = CIRCLE ( 'NONE', #4850, 1.000000000000000900 ) ; +#1099 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -9.000000000000005300, -7.499999999999995600 ) ) ; +#1100 = CARTESIAN_POINT ( 'NONE', ( 5.317871993338723500, 13.07050980650982000, -18.92520300206813000 ) ) ; +#1101 = ORIENTED_EDGE ( 'NONE', *, *, #1433, .T. ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -10.00000000000000400, -7.499999999999995600 ) ) ; +#1103 = CIRCLE ( 'NONE', #3983, 5.000000000000000000 ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( 18.98108313761134300, 9.948751463531293000, 15.90511840410515500 ) ) ; +#1105 = AXIS2_PLACEMENT_3D ( 'NONE', #1022, #3878, #1445 ) ; +#1106 = CIRCLE ( 'NONE', #4725, 0.9999999999999990000 ) ; +#1108 = CARTESIAN_POINT ( 'NONE', ( 9.171144559190214100, -10.00000000000000000, 12.57183269374850100 ) ) ; +#1107 = CARTESIAN_POINT ( 'NONE', ( 0.2508400287545833900, 1.302157558565799000, -29.04913052172727500 ) ) ; +#1109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9385387771125538500, -0.3451738168750231300 ) ) ; +#1110 = CIRCLE ( 'NONE', #5015, 6.123724356957925600 ) ; +#1111 = CARTESIAN_POINT ( 'NONE', ( 6.860576466507255100, 13.55634533548202800, -20.86186219554790000 ) ) ; +#1112 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.609990704473572800, 16.81510997845936500 ) ) ; +#1113 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, -1.505759517047136500, -23.64527242200717400 ) ) ; +#1114 = CARTESIAN_POINT ( 'NONE', ( 2.461899988158076500, 19.78590545866231000, -53.68075463268521500 ) ) ; +#1115 = CARTESIAN_POINT ( 'NONE', ( 1.635308817895068300, 10.87154677662164900, -55.54758678018319500 ) ) ; +#1116 = CARTESIAN_POINT ( 'NONE', ( 5.058346523864415200, 24.20488062238503000, -61.88709313753855700 ) ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( 1.612080430325170600, 14.46987899604904900, -26.25270885186490200 ) ) ; +#1118 = CARTESIAN_POINT ( 'NONE', ( 5.966455908112045800, -5.198558500000925300, 17.50000000000000000 ) ) ; +#1119 = ORIENTED_EDGE ( 'NONE', *, *, #1796, .F. ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.831681242092177100, 17.17501982790601300 ) ) ; +#1121 = EDGE_LOOP ( 'NONE', ( #918, #2623, #1274, #1882 ) ) ; +#1122 = CARTESIAN_POINT ( 'NONE', ( 1.515361463686350800, 1.859669121654969400, -29.34833945159030900 ) ) ; +#1123 = ORIENTED_EDGE ( 'NONE', *, *, #2910, .F. ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( 19.48271905990901600, 5.948735003227295900, 17.97457041941077400 ) ) ; +#1124 = CARTESIAN_POINT ( 'NONE', ( 4.379787192858857200, 2.072980127874388200, -25.80872155393487700 ) ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999500, 8.847791774116423400, 16.04435453005353900 ) ) ; +#1127 = CARTESIAN_POINT ( 'NONE', ( 17.45505779299519800, 3.543754424544895100, -30.54751965691237500 ) ) ; +#1128 = VERTEX_POINT ( 'NONE', #1354 ) ; +#1129 = EDGE_CURVE ( 'NONE', #2323, #4936, #187, .T. ) ; +#1130 = VERTEX_POINT ( 'NONE', #4603 ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( 8.819020385448027400, 11.04079927581627300, -20.93592479911176300 ) ) ; +#1132 = EDGE_CURVE ( 'NONE', #1078, #3018, #2503, .T. ) ; +#1133 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 4.641191839834731600, 17.69329534418361000 ) ) ; +#1134 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, 1.598510117153289200, -25.35804347956671400 ) ) ; +#1135 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 4.999999999999997300, 7.499999999999996400 ) ) ; +#1136 = CARTESIAN_POINT ( 'NONE', ( 2.462316166534472800, 11.71626243413898600, -55.84726720182244000 ) ) ; +#1137 = EDGE_LOOP ( 'NONE', ( #25, #206, #2275, #4124 ) ) ; +#1138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.22771491430602000, -23.40969935769455300 ) ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( 11.50508989248716000, -9.999999999999998200, 12.55747423926831100 ) ) ; +#1140 = CARTESIAN_POINT ( 'NONE', ( 7.507517653493055200, 20.93800755568990700, -60.19547818187658800 ) ) ; +#1141 = ORIENTED_EDGE ( 'NONE', *, *, #4283, .T. ) ; +#1142 = AXIS2_PLACEMENT_3D ( 'NONE', #2253, #3462, #5073 ) ; +#1143 = ORIENTED_EDGE ( 'NONE', *, *, #1328, .T. ) ; +#1144 = CARTESIAN_POINT ( 'NONE', ( 6.019309988848518400, -0.6730509806664882700, -25.13571135188675900 ) ) ; +#1146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1145 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1339, #1322, #920, #4175, #1741, #4575, #2143, #4967, #2560, #98, #2951, #519, #3373, #934, #3788, #1352, #4187, #1754, #4588, #2159 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001371930648718652300, 0.002743861297437304600, 0.004115791946155957100, 0.004801757270515282300, 0.005487722594874606600, 0.006859653243593251800, 0.008231583892311896900, 0.009603514541030542000, 0.01097544518974918700 ), + .UNSPECIFIED. ) ; +#1147 = VECTOR ( 'NONE', #2510, 999.9999999999998900 ) ; +#1148 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666665200, 14.50935294783794700, -26.81835075481546600 ) ) ; +#1149 = ORIENTED_EDGE ( 'NONE', *, *, #2606, .F. ) ; +#1150 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ; +#1151 = AXIS2_PLACEMENT_3D ( 'NONE', #5013, #2582, #148 ) ; +#1152 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1153 = CARTESIAN_POINT ( 'NONE', ( 11.14817807594739400, 12.81724406773863300, -17.90428421802912200 ) ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( 19.35923699728391900, 7.848783069637205400, 17.80887397500187000 ) ) ; +#1155 = PLANE ( 'NONE', #5184 ) ; +#1156 = FACE_OUTER_BOUND ( 'NONE', #4012, .T. ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( 3.601340669519667200, 8.317371450783372900, 20.34011304379123400 ) ) ; +#1158 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -9.000000000000005300, -7.499999999999995600 ) ) ; +#1159 = ORIENTED_EDGE ( 'NONE', *, *, #3132, .T. ) ; +#1160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890723100, -0.2588190451025057500 ) ) ; +#1161 = CARTESIAN_POINT ( 'NONE', ( 9.532559333026018300, 25.94658244508271100, -59.29831107143613900 ) ) ; +#1162 = LINE ( 'NONE', #1689, #3314 ) ; +#1163 = ORIENTED_EDGE ( 'NONE', *, *, #3050, .F. ) ; +#1164 = FACE_OUTER_BOUND ( 'NONE', #2696, .T. ) ; +#1165 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.81382236340611400, -56.23255212013585700 ) ) ; +#1166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890700900 ) ) ; +#1167 = EDGE_CURVE ( 'NONE', #3049, #1381, #1296, .T. ) ; +#1168 = CIRCLE ( 'NONE', #4798, 1.000000000000000200 ) ; +#1169 = CIRCLE ( 'NONE', #4664, 5.123724356957924700 ) ; +#1170 = ORIENTED_EDGE ( 'NONE', *, *, #3278, .T. ) ; +#1171 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, 12.93374564363919400, -28.10814606143651800 ) ) ; +#1172 = AXIS2_PLACEMENT_3D ( 'NONE', #4814, #2394, #5219 ) ; +#1173 = CARTESIAN_POINT ( 'NONE', ( 5.923481379642788100, 10.00000000000000200, 21.22260419102960700 ) ) ; +#1174 = CARTESIAN_POINT ( 'NONE', ( 18.25546838513644200, 14.57702719085527900, -27.08474018550349500 ) ) ; +#1175 = EDGE_CURVE ( 'NONE', #1017, #2027, #428, .T. ) ; +#1176 = TOROIDAL_SURFACE ( 'NONE', #2617, 4.000000000000000000, 1.000000000000000000 ) ; +#1177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1178 = CARTESIAN_POINT ( 'NONE', ( 10.25115315697924100, 23.47171686470413800, -64.30979288343178300 ) ) ; +#1179 = CARTESIAN_POINT ( 'NONE', ( 17.22296997800039300, 3.721158669484379500, -28.58494261741184100 ) ) ; +#1180 = VECTOR ( 'NONE', #677, 1000.000000000000100 ) ; +#1181 = CARTESIAN_POINT ( 'NONE', ( 3.161261255601784300, 3.064956118849384600, -27.44178832981148400 ) ) ; +#1183 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#1182 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, 12.93374564363919400, -28.10814606143651800 ) ) ; +#1184 = ADVANCED_FACE ( 'NONE', ( #3327 ), #2239, .F. ) ; +#1185 = ORIENTED_EDGE ( 'NONE', *, *, #3965, .T. ) ; +#1186 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000053900, 23.05605783849864900, -53.54145205234461700 ) ) ; +#1187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9853853318533081200, -0.1703400944239075500 ) ) ; +#1188 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 13.96819975629100900, -27.83096491734441000 ) ) ; +#1189 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 23.22519872755273700, -56.85711359142335700 ) ) ; +#1190 = ORIENTED_EDGE ( 'NONE', *, *, #3240, .T. ) ; +#1191 = CARTESIAN_POINT ( 'NONE', ( 1.642159294393593200, 11.11078487760856400, -56.66999009764195700 ) ) ; +#1192 = ORIENTED_EDGE ( 'NONE', *, *, #2107, .T. ) ; +#1193 = DIRECTION ( 'NONE', ( -4.489794735692284300E-016, -0.2588190451025126900, 0.9659258262890705300 ) ) ; +#1194 = CARTESIAN_POINT ( 'NONE', ( 11.74900235184204600, 20.81436847150643400, -60.42464362913653300 ) ) ; +#1195 = ORIENTED_EDGE ( 'NONE', *, *, #4283, .F. ) ; +#1196 = ORIENTED_EDGE ( 'NONE', *, *, #4756, .T. ) ; +#1197 = CARTESIAN_POINT ( 'NONE', ( 17.37508374307302700, -0.5674352604404726600, -25.36426634578659300 ) ) ; +#1198 = EDGE_CURVE ( 'NONE', #1342, #2134, #4535, .T. ) ; +#1199 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 19.65596328590101300, -53.19380947054323600 ) ) ; +#1200 = ORIENTED_EDGE ( 'NONE', *, *, #1264, .T. ) ; +#1202 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 3.258686208197962000, -29.95633160533155600 ) ) ; +#1201 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.709269841782313100, 16.93242356500262200 ) ) ; +#1203 = ORIENTED_EDGE ( 'NONE', *, *, #3075, .T. ) ; +#1204 = CARTESIAN_POINT ( 'NONE', ( 18.73902503171492700, 23.04968938570538500, -56.20210381044605400 ) ) ; +#1205 = EDGE_CURVE ( 'NONE', #974, #447, #61, .T. ) ; +#1206 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890696400, -0.2588190451025159100 ) ) ; +#1208 = EDGE_LOOP ( 'NONE', ( #2776, #5197, #3945, #3470, #2993 ) ) ; +#1209 = CARTESIAN_POINT ( 'NONE', ( 18.61976789149376500, 22.80695912769455400, -55.70911979995034400 ) ) ; +#1210 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1211 = CARTESIAN_POINT ( 'NONE', ( 12.29354397883474400, 24.79596924851071500, -59.24253563560854000 ) ) ; +#1212 = ADVANCED_FACE ( 'NONE', ( #1032 ), #1176, .T. ) ; +#1213 = AXIS2_PLACEMENT_3D ( 'NONE', #3213, #774, #3629 ) ; +#1214 = ORIENTED_EDGE ( 'NONE', *, *, #4830, .F. ) ; +#1215 = ORIENTED_EDGE ( 'NONE', *, *, #3240, .F. ) ; +#1216 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5123, #4346, #4732, #2312 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0007565234065506647100 ), + .UNSPECIFIED. ) ; +#1217 = LINE ( 'NONE', #4177, #3246 ) ; +#1218 = EDGE_LOOP ( 'NONE', ( #1524, #4754, #2788, #2328, #2939, #495, #28 ) ) ; +#1219 = ORIENTED_EDGE ( 'NONE', *, *, #2913, .F. ) ; +#1221 = CARTESIAN_POINT ( 'NONE', ( 1.688899416914270800, 2.769310375077732800, -30.56045493005530700 ) ) ; +#1220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#1222 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1223 = FACE_OUTER_BOUND ( 'NONE', #2152, .T. ) ; +#1224 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1225 = ORIENTED_EDGE ( 'NONE', *, *, #719, .F. ) ; +#1226 = CARTESIAN_POINT ( 'NONE', ( 18.84577765138330500, 8.026124936460448100, 18.10351783898541500 ) ) ; +#1227 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 7.709269841782330900, 16.93242356500261900 ) ) ; +#1228 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1229 = CARTESIAN_POINT ( 'NONE', ( -7.819676047784132300E-015, 9.873706547156269100, 15.88644078001535800 ) ) ; +#1230 = CARTESIAN_POINT ( 'NONE', ( 16.10119335573705600, 24.18977826618722600, -60.45697343754845600 ) ) ; +#1231 = AXIS2_PLACEMENT_3D ( 'NONE', #4856, #2443, #5262 ) ; +#1232 = DATE_AND_TIME ( #2300, #3374 ) ; +#1233 = CIRCLE ( 'NONE', #391, 5.123724356957924700 ) ; +#1234 = ORIENTED_EDGE ( 'NONE', *, *, #4918, .T. ) ; +#1235 = EDGE_CURVE ( 'NONE', #2212, #1811, #2116, .T. ) ; +#1236 = FACE_OUTER_BOUND ( 'NONE', #3738, .T. ) ; +#1237 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999255900, 0.4654998936782570600, -27.35715002712167600 ) ) ; +#1238 = ADVANCED_FACE ( 'NONE', ( #5225 ), #4275, .T. ) ; +#1239 = EDGE_CURVE ( 'NONE', #978, #1609, #3051, .T. ) ; +#1240 = APPROVAL_ROLE ( '' ) ; +#1241 = CARTESIAN_POINT ( 'NONE', ( 1.071868910429934600, 14.27278532368971200, -23.44625191784502100 ) ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( 19.67389453957293100, 10.00000000000000400, 17.45504577057665700 ) ) ; +#1243 = FACE_OUTER_BOUND ( 'NONE', #3266, .T. ) ; +#1244 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 23.04549627076574600, -60.05015819760570400 ) ) ; +#1245 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1246 = EDGE_CURVE ( 'NONE', #1263, #581, #1999, .T. ) ; +#1247 = CARTESIAN_POINT ( 'NONE', ( 0.6462205829275243800, 8.986106488767822100, 17.36741989591050800 ) ) ; +#1248 = ORIENTED_EDGE ( 'NONE', *, *, #4072, .T. ) ; +#1249 = EDGE_LOOP ( 'NONE', ( #859, #3700, #77, #1690 ) ) ; +#1250 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000112500, 14.55110068522249700, -23.81681542980486900 ) ) ; +#1251 = CARTESIAN_POINT ( 'NONE', ( 0.4193524637885436300, 3.916795832507409300, 17.96878393216328700 ) ) ; +#1252 = ORIENTED_EDGE ( 'NONE', *, *, #1678, .T. ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( 14.03354329503611300, 13.52558267220471000, -65.45731853658506300 ) ) ; +#1254 = ORIENTED_EDGE ( 'NONE', *, *, #4216, .F. ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( 14.56341141697947900, 14.18993147595740600, -60.79828692105484600 ) ) ; +#1256 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1257 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1258 = EDGE_LOOP ( 'NONE', ( #356, #5174, #1770, #218 ) ) ; +#1259 = ORIENTED_EDGE ( 'NONE', *, *, #3041, .F. ) ; +#1260 = ADVANCED_FACE ( 'NONE', ( #4049 ), #907, .F. ) ; +#1261 = CARTESIAN_POINT ( 'NONE', ( 6.178584552348798600, 10.00000000000000500, 19.44377072439493400 ) ) ; +#1262 = ORIENTED_EDGE ( 'NONE', *, *, #3965, .F. ) ; +#1263 = VERTEX_POINT ( 'NONE', #3058 ) ; +#1264 = EDGE_CURVE ( 'NONE', #2252, #4513, #783, .T. ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( 18.28629162093099200, 14.46988657441098700, -26.25293504787000700 ) ) ; +#1266 = ORIENTED_EDGE ( 'NONE', *, *, #1736, .T. ) ; +#1267 = AXIS2_PLACEMENT_3D ( 'NONE', #4637, #2215, #5038 ) ; +#1268 = EDGE_CURVE ( 'NONE', #3223, #3437, #1933, .T. ) ; +#1269 = CARTESIAN_POINT ( 'NONE', ( 8.745081925444282000, 14.76856695286147000, -66.51703986100305600 ) ) ; +#1270 = CARTESIAN_POINT ( 'NONE', ( 12.29163632025230900, 11.22691289846655500, -62.87900720518058500 ) ) ; +#1271 = LINE ( 'NONE', #2920, #3172 ) ; +#1272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#1273 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#1274 = ORIENTED_EDGE ( 'NONE', *, *, #1129, .F. ) ; +#1275 = ORIENTED_EDGE ( 'NONE', *, *, #4648, .F. ) ; +#1276 = CARTESIAN_POINT ( 'NONE', ( 15.60190511144985800, -1.323338017688272100, -23.97177630631502200 ) ) ; +#1277 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1278 = AXIS2_PLACEMENT_3D ( 'NONE', #3410, #969, #3828 ) ; +#1279 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3643, #4057, #2431, #5256 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009065014181572931700 ), + .UNSPECIFIED. ) ; +#1280 = CIRCLE ( 'NONE', #1859, 5.000000000000000000 ) ; +#1281 = ORIENTED_EDGE ( 'NONE', *, *, #2798, .F. ) ; +#1282 = CYLINDRICAL_SURFACE ( 'NONE', #2701, 0.9999999999999995600 ) ; +#1283 = ORIENTED_EDGE ( 'NONE', *, *, #5237, .T. ) ; +#1284 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824605200, 11.47788851493754000, -22.67481328856045100 ) ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 12.44149154480392000, -20.47547379661466100 ) ) ; +#1286 = ADVANCED_FACE ( 'NONE', ( #4154 ), #1734, .T. ) ; +#1287 = AXIS2_PLACEMENT_3D ( 'NONE', #4439, #2003, #4839 ) ; +#1288 = FACE_OUTER_BOUND ( 'NONE', #4085, .T. ) ; +#1289 = CARTESIAN_POINT ( 'NONE', ( 4.168609081717155700, 12.56607464330526900, -64.02044768774695200 ) ) ; +#1290 = CARTESIAN_POINT ( 'NONE', ( 12.35059067416585800, 14.37576827090201300, -66.24300729108722400 ) ) ; +#1291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#1292 = CIRCLE ( 'NONE', #4531, 101.0000000000000100 ) ; +#1293 = CARTESIAN_POINT ( 'NONE', ( 11.74529062143018600, 13.43585275760947800, -20.43126375819019100 ) ) ; +#1294 = CARTESIAN_POINT ( 'NONE', ( 19.05808513581882500, -0.3807944058574598800, 17.53664586241799100 ) ) ; +#1295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#1296 = CIRCLE ( 'NONE', #1557, 2.500000000000000900 ) ; +#1297 = EDGE_CURVE ( 'NONE', #614, #2659, #1857, .T. ) ; +#1298 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 21.53443784330249100, -55.15861882161993900 ) ) ; +#1299 = VECTOR ( 'NONE', #4706, 1000.000000000000000 ) ; +#1300 = EDGE_CURVE ( 'NONE', #3179, #4545, #2815, .T. ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( 13.02604764183132800, 7.499999999993236500, 20.00000000000000400 ) ) ; +#1302 = CARTESIAN_POINT ( 'NONE', ( 10.17743369116169000, 15.56246522046831900, -62.05520251536986400 ) ) ; +#1303 = VERTEX_POINT ( 'NONE', #1490 ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( 13.42527162694701700, 11.21826796052401500, -21.67173249728365600 ) ) ; +#1305 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.14722090442170800, -62.70239308847840200 ) ) ; +#1306 = PLANE ( 'NONE', #4745 ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, 4.999999999999990200, -22.46941544652791100 ) ) ; +#1308 = ADVANCED_FACE ( 'NONE', ( #642 ), #887, .T. ) ; +#1309 = ORIENTED_EDGE ( 'NONE', *, *, #3687, .T. ) ; +#1310 = VERTEX_POINT ( 'NONE', #3452 ) ; +#1311 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2704, #4340, #270 ), + ( #3111, #681, #3538 ), + ( #1104, #3954, #1522 ), + ( #4356, #1915, #4744 ), + ( #2325, #5154, #2723 ), + ( #289, #3133, #702 ), + ( #3560, #1120, #3976 ), + ( #1537, #4376, #1935 ), + ( #4770, #2345, #5173 ), + ( #2745, #310, #3154 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0005592429056310808100, 0.001118485811262161600, 0.001677728716893242500, 0.002236971622524323200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865597900, 1.000000000000000000), + ( 1.000000000000000000, 0.7212587151347640300, 1.000000000000000000), + ( 1.000000000000000000, 0.7359157255566305400, 1.000000000000000000), + ( 1.000000000000000000, 0.7662726429596623500, 1.000000000000000000), + ( 1.000000000000000000, 0.7812632132600150200, 1.000000000000000000), + ( 1.000000000000000000, 0.8098274713663244900, 1.000000000000000000), + ( 1.000000000000000000, 0.8228000573434787200, 1.000000000000000000), + ( 1.000000000000000000, 0.8437974917256284600, 1.000000000000000000), + ( 1.000000000000000000, 0.8513893087021740000, 1.000000000000000000), + ( 1.000000000000000000, 0.8546452472470427200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1312 = ORIENTED_EDGE ( 'NONE', *, *, #182, .T. ) ; +#1313 = AXIS2_PLACEMENT_3D ( 'NONE', #1573, #4417, #1979 ) ; +#1314 = ORIENTED_EDGE ( 'NONE', *, *, #2140, .T. ) ; +#1315 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 23.06396930162843300, -53.00858017148790700 ) ) ; +#1316 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890669800, -0.2588190451025260700 ) ) ; +#1318 = ORIENTED_EDGE ( 'NONE', *, *, #2248, .F. ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( 9.533587923257250900, 10.25797194794540000, -63.50204468944760100 ) ) ; +#1320 = ORIENTED_EDGE ( 'NONE', *, *, #3699, .T. ) ; +#1321 = AXIS2_PLACEMENT_3D ( 'NONE', #2247, #5067, #2645 ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( 5.339118391783401300, 14.19087412341691800, -60.80180496951689400 ) ) ; +#1323 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1324 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, 10.18804067014304600, -45.86502151901292700 ) ) ; +#1325 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 4.999999999999997300, 7.499999999999996400 ) ) ; +#1326 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.500000000000003600, 20.00000000000000400 ) ) ; +#1327 = ORIENTED_EDGE ( 'NONE', *, *, #4502, .F. ) ; +#1328 = EDGE_CURVE ( 'NONE', #114, #2014, #2680, .T. ) ; +#1329 = ORIENTED_EDGE ( 'NONE', *, *, #1442, .T. ) ; +#1330 = ORIENTED_EDGE ( 'NONE', *, *, #2882, .T. ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333340300, 21.37922248559113900, -52.73206355963677800 ) ) ; +#1332 = ADVANCED_FACE ( 'NONE', ( #2928 ), #3660, .T. ) ; +#1333 = LINE ( 'NONE', #2532, #3501 ) ; +#1334 = SECURITY_CLASSIFICATION ( '', '', #3 ) ; +#1335 = EDGE_CURVE ( 'NONE', #2942, #4069, #1627, .T. ) ; +#1336 = ORIENTED_EDGE ( 'NONE', *, *, #2550, .F. ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 22.50000000000004300 ) ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( 6.693883050060163600, 13.97443852970171100, -65.90976783351135300 ) ) ; +#1339 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753876100, 14.11082393428809700, -60.50305359653262400 ) ) ; +#1340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#1341 = CARTESIAN_POINT ( 'NONE', ( 15.29818515931034800, 1.935723407444723600, -25.59084043750436900 ) ) ; +#1342 = VERTEX_POINT ( 'NONE', #1033 ) ; +#1343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890698700, -0.2588190451025151900 ) ) ; +#1344 = CARTESIAN_POINT ( 'NONE', ( 8.227150504552767500, 23.62323566318450600, -64.01726233739249500 ) ) ; +#1345 = FACE_OUTER_BOUND ( 'NONE', #133, .T. ) ; +#1346 = PERSON_AND_ORGANIZATION ( #4449, #3515 ) ; +#1347 = FACE_OUTER_BOUND ( 'NONE', #249, .T. ) ; +#1348 = ORIENTED_EDGE ( 'NONE', *, *, #1167, .F. ) ; +#1349 = AXIS2_PLACEMENT_3D ( 'NONE', #2786, #4433, #368 ) ; +#1350 = CARTESIAN_POINT ( 'NONE', ( 5.701283391601888800, 14.32324625790556800, -61.03872285981508800 ) ) ; +#1351 = EDGE_CURVE ( 'NONE', #3744, #2094, #1492, .T. ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( 13.01677964642251300, 14.80229880413827800, -61.59448304486962700 ) ) ; +#1353 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 13.61511163816238200, -25.76307517094155100 ) ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 10.00000000000000200, 5.665249758739323100 ) ) ; +#1355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1356 = CARTESIAN_POINT ( 'NONE', ( 12.59695623874426800, 23.80308625675117200, -63.60523649003491200 ) ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.81382236340609800, -56.23255212013579300 ) ) ; +#1358 = LINE ( 'NONE', #6, #3384 ) ; +#1359 = ADVANCED_FACE ( 'NONE', ( #2559 ), #3010, .T. ) ; +#1360 = EDGE_CURVE ( 'NONE', #4436, #1128, #3523, .T. ) ; +#1361 = DIRECTION ( 'NONE', ( -5.892526338758042200E-013, -0.4503669001738597700, 0.8928435782530941300 ) ) ; +#1362 = ORIENTED_EDGE ( 'NONE', *, *, #4868, .T. ) ; +#1363 = AXIS2_PLACEMENT_3D ( 'NONE', #1301, #4147, #1711 ) ; +#1364 = EDGE_CURVE ( 'NONE', #3366, #4726, #3777, .T. ) ; +#1365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025138600, 0.9659258262890703100 ) ) ; +#1366 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3666, #812, #4479, #2038, #4867, #2457, #5283, #2848, #412, #3268 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.005392838741401166600, 0.006740523553231504900, 0.008088208365061843100, 0.009435893176892182200, 0.01078357798872252000 ), + .UNSPECIFIED. ) ; +#1367 = CARTESIAN_POINT ( 'NONE', ( 18.75356896798290400, 14.35313378953078500, -23.74611647467413500 ) ) ; +#1368 = ORIENTED_EDGE ( 'NONE', *, *, #2553, .F. ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333332800, 3.023894846702058100, -31.05974356099691000 ) ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 10.00000000000000200, 5.665249758739323100 ) ) ; +#1371 = AXIS2_PLACEMENT_3D ( 'NONE', #4261, #1424, #3442 ) ; +#1372 = ORIENTED_EDGE ( 'NONE', *, *, #1945, .F. ) ; +#1373 = CARTESIAN_POINT ( 'NONE', ( 2.487300000000001200, 4.292876200220360000, -29.64181049816156800 ) ) ; +#1374 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 18.09635858759372700, -61.37627564304205000 ) ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( 18.41967668277215300, 1.723248497779431800, -29.18648696800796900 ) ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.36099753491963900, -59.76816752739859600 ) ) ; +#1377 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1378 = VERTEX_POINT ( 'NONE', #5126 ) ; +#1379 = CARTESIAN_POINT ( 'NONE', ( 1.635310285106451200, 14.64430282240153700, -27.35834804008802100 ) ) ; +#1380 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5080, #609, #1472, #4307 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.126183464119074000E-017, 0.003593349197546098400 ), + .UNSPECIFIED. ) ; +#1381 = VERTEX_POINT ( 'NONE', #1092 ) ; +#1382 = CARTESIAN_POINT ( 'NONE', ( 15.37484323688198600, -1.385213535159250700, -23.86118119006729900 ) ) ; +#1383 = ORIENTED_EDGE ( 'NONE', *, *, #139, .T. ) ; +#1384 = ORIENTED_EDGE ( 'NONE', *, *, #2468, .F. ) ; +#1385 = ADVANCED_FACE ( 'NONE', ( #2448 ), #109, .T. ) ; +#1386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#1387 = ORIENTED_EDGE ( 'NONE', *, *, #1097, .T. ) ; +#1388 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 7.709269841782313100, 16.93242356500262200 ) ) ; +#1389 = CARTESIAN_POINT ( 'NONE', ( 1.642159294393595000, 21.79290010774963400, -53.80772594826952800 ) ) ; +#1390 = ORIENTED_EDGE ( 'NONE', *, *, #3132, .F. ) ; +#1391 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 9.000000000000001800, -7.500000000000000900 ) ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 22.10462268821191500, -56.53877018401534100 ) ) ; +#1393 = CARTESIAN_POINT ( 'NONE', ( 1.478723317229471400, 1.723248497783592500, -29.18648696801257700 ) ) ; +#1394 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1395 = FACE_OUTER_BOUND ( 'NONE', #1715, .T. ) ; +#1396 = ORIENTED_EDGE ( 'NONE', *, *, #2492, .T. ) ; +#1397 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ; +#1398 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333339200, 21.37922248559114300, -52.73206355963677800 ) ) ; +#1399 = EDGE_CURVE ( 'NONE', #4371, #4500, #259, .T. ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, 24.01142209705481200, -59.79133915250319100 ) ) ; +#1401 = EDGE_CURVE ( 'NONE', #605, #2702, #4480, .T. ) ; +#1402 = VECTOR ( 'NONE', #3875, 1000.000000000000000 ) ; +#1403 = ORIENTED_EDGE ( 'NONE', *, *, #4045, .T. ) ; +#1404 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999998500, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#1405 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1406 = CYLINDRICAL_SURFACE ( 'NONE', #2156, 4.999999999999997300 ) ; +#1407 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -4.999999999999999100, 17.50000000000000000 ) ) ; +#1408 = ORIENTED_EDGE ( 'NONE', *, *, #2173, .T. ) ; +#1409 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000100, 1.598781742594273000, -25.35797069774914900 ) ) ; +#1410 = CARTESIAN_POINT ( 'NONE', ( 18.98171995084574700, 9.948200321519616200, 15.90957673458511400 ) ) ; +#1411 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -10.00000000000000400, -7.499999999999995600 ) ) ; +#1412 = FACE_OUTER_BOUND ( 'NONE', #2411, .T. ) ; +#1413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9119034547979171200, -0.4104047869209414000 ) ) ; +#1414 = CARTESIAN_POINT ( 'NONE', ( 8.156336706801980100, 11.06864045964322200, -21.05408180541162700 ) ) ; +#1415 = ADVANCED_FACE ( 'NONE', ( #1236 ), #4709, .T. ) ; +#1416 = CARTESIAN_POINT ( 'NONE', ( 1.338769216035955700, 10.00000000000000200, 15.43435067612591800 ) ) ; +#1417 = FACE_OUTER_BOUND ( 'NONE', #3618, .T. ) ; +#1418 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999987400, 20.72074773948790800, -52.90850133609142600 ) ) ; +#1419 = VECTOR ( 'NONE', #3840, 1000.000000000000000 ) ; +#1420 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025131300, 0.9659258262890705300 ) ) ; +#1421 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1422 = CYLINDRICAL_SURFACE ( 'NONE', #988, 5.000000000000000000 ) ; +#1423 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 16.50000000000000000 ) ) ; +#1424 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1425 = AXIS2_PLACEMENT_3D ( 'NONE', #4843, #3653, #2007 ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 13.91366609406729400, 5.000000000000000000, 22.50000000000000400 ) ) ; +#1427 = LINE ( 'NONE', #1872, #1299 ) ; +#1428 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000100, -1.345292019307241300, -23.93268423954030800 ) ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1430 = CARTESIAN_POINT ( 'NONE', ( 18.38303853631435200, 1.859669121652213700, -29.34833945158696300 ) ) ; +#1431 = DIRECTION ( 'NONE', ( 2.954929606972584800E-016, -0.1703400944239075700, 0.9853853318533083400 ) ) ; +#1432 = ORIENTED_EDGE ( 'NONE', *, *, #5011, .T. ) ; +#1433 = EDGE_CURVE ( 'NONE', #3755, #2212, #118, .T. ) ; +#1434 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1435 = CARTESIAN_POINT ( 'NONE', ( 4.037047524761298600E-014, 1.470318129669572600, 17.46044410253122000 ) ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( 1.657305493190508200, 21.67328587988185300, -53.52186271488689300 ) ) ; +#1437 = CARTESIAN_POINT ( 'NONE', ( 9.020301146114700700, 20.67543025870994500, -60.63960764478820700 ) ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( 5.281972922924028400, -4.999999999999998200, 12.50000000000000000 ) ) ; +#1439 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -3.409074173710830500, -0.9134586717835899700 ) ) ; +#1440 = ORIENTED_EDGE ( 'NONE', *, *, #4037, .F. ) ; +#1441 = AXIS2_PLACEMENT_3D ( 'NONE', #1562, #5198, #2770 ) ; +#1442 = EDGE_CURVE ( 'NONE', #2425, #2193, #3382, .T. ) ; +#1443 = EDGE_LOOP ( 'NONE', ( #1150, #935, #4659, #1119 ) ) ; +#1444 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 8.364201192633155200, -5.258819045102568700 ) ) ; +#1445 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.071749949514383700E-014, -1.000000000000000000 ) ) ; +#1446 = VERTEX_POINT ( 'NONE', #1988 ) ; +#1447 = CARTESIAN_POINT ( 'NONE', ( -3.447260747736860900E-012, 11.03761176400274700, -59.36105145528196700 ) ) ; +#1448 = EDGE_LOOP ( 'NONE', ( #3769, #2085, #2837, #4455 ) ) ; +#1449 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -1.457153238772569900, 16.50000000000000000 ) ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 19.65596328590101600, -53.19380947054322900 ) ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1452 = ORIENTED_EDGE ( 'NONE', *, *, #4502, .T. ) ; +#1453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025159700, 0.9659258262890697600 ) ) ; +#1454 = ORIENTED_EDGE ( 'NONE', *, *, #1578, .F. ) ; +#1455 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1456 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.657035876508532900, 17.19065370001141000 ) ) ; +#1457 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 2.312964634635743900E-016, 1.000000000000000000 ) ) ; +#1458 = CARTESIAN_POINT ( 'NONE', ( 18.42008692469351800, 11.13530205371464300, -57.81132916772534700 ) ) ; +#1459 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.96819975629101100, -27.83096491734441000 ) ) ; +#1460 = EDGE_LOOP ( 'NONE', ( #1747, #2548, #5040, #530 ) ) ; +#1461 = CIRCLE ( 'NONE', #2361, 5.000000000000000000 ) ; +#1462 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.65446821274872700, -55.06985442120481600 ) ) ; +#1463 = EDGE_LOOP ( 'NONE', ( #4444, #2538, #299, #4062, #463 ) ) ; +#1464 = ORIENTED_EDGE ( 'NONE', *, *, #4248, .F. ) ; +#1465 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.90452110024514800, -56.82191953939803900 ) ) ; +#1467 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.82641050395611300, -27.24335067068119200 ) ) ; +#1466 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 8.364201192633155200, -5.258819045102568700 ) ) ; +#1468 = CYLINDRICAL_SURFACE ( 'NONE', #4207, 5.000000000000000900 ) ; +#1469 = EDGE_CURVE ( 'NONE', #4881, #1130, #4855, .T. ) ; +#1470 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.77489008581955500, -26.94531476495733500 ) ) ; +#1471 = EDGE_LOOP ( 'NONE', ( #1432, #39, #664 ) ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 2.661242075244175900, -28.91806644426755900 ) ) ; +#1473 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 1.320581149576792700, -31.07156646030474400 ) ) ; +#1474 = CARTESIAN_POINT ( 'NONE', ( 16.29665038619624800, 8.317420489178562800, 20.34045635674047500 ) ) ; +#1475 = VECTOR ( 'NONE', #1096, 1000.000000000000000 ) ; +#1476 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1477 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.674647099076118600, -30.76687062793725500 ) ) ; +#1478 = EDGE_CURVE ( 'NONE', #1130, #5113, #3269, .T. ) ; +#1479 = EDGE_LOOP ( 'NONE', ( #1141, #1722, #416 ) ) ; +#1480 = DIRECTION ( 'NONE', ( -0.6484729204542122300, 0.0000000000000000000, 0.7612377233411287100 ) ) ; +#1481 = VECTOR ( 'NONE', #3802, 1000.000000000000000 ) ; +#1482 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4211, #4606, #2181 ), + ( #5004, #2588, #135 ), + ( #2984, #554, #3412 ), + ( #970, #3830, #1393 ), + ( #4228, #1788, #4624 ), + ( #2198, #5020, #2604 ), + ( #156, #2999, #570 ), + ( #3429, #3683, #1036 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001796674598765589500, 0.002695011898148384400, 0.003593349197531178900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865473500, 1.000000000000000000), + ( 1.000000000000000000, 0.6507963961991265500, 1.000000000000000000), + ( 1.000000000000000000, 0.5919065384180420800, 1.000000000000000000), + ( 1.000000000000000000, 0.5112352069392004400, 1.000000000000000000), + ( 1.000000000000000000, 0.4856736746321768100, 1.000000000000000000), + ( 1.000000000000000000, 0.4409014066080442200, 1.000000000000000000), + ( 1.000000000000000000, 0.4217338484087321300, 1.000000000000000000), + ( 1.000000000000000000, 0.4082482904638645700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1483 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025144700 ) ) ; +#1484 = AXIS2_PLACEMENT_3D ( 'NONE', #3145, #3948, #3575 ) ; +#1485 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#1486 = CYLINDRICAL_SURFACE ( 'NONE', #3496, 2.499999999999999600 ) ; +#1488 = CARTESIAN_POINT ( 'NONE', ( 0.7771520005493030000, 9.591266553234945000, 16.73302968479679700 ) ) ; +#1487 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1489 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 14.50935294783795000, -26.81835075481547300 ) ) ; +#1490 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, -4.999999999999997300, 7.499999999999998200 ) ) ; +#1491 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 3.674647099076111100, -30.76687062793726600 ) ) ; +#1492 = LINE ( 'NONE', #3042, #398 ) ; +#1493 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890699800, -0.2588190451025145200 ) ) ; +#1494 = AXIS2_PLACEMENT_3D ( 'NONE', #1183, #4041, #1592 ) ; +#1495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#1496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1497 = CARTESIAN_POINT ( 'NONE', ( 12.02704801017746500, 12.85412597396662300, -18.05566656711462800 ) ) ; +#1498 = CYLINDRICAL_SURFACE ( 'NONE', #1484, 2.499999999999999600 ) ; +#1499 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017200E-016, 15.97827867187473500, -26.56442273453174600 ) ) ; +#1500 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1501 = AXIS2_PLACEMENT_3D ( 'NONE', #3231, #2008, #797 ) ; +#1502 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.258686208197977900, -29.95633160533158400 ) ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999999100, 12.50000000000000000 ) ) ; +#1504 = ORIENTED_EDGE ( 'NONE', *, *, #2324, .T. ) ; +#1505 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 24.01142209705481200, -59.79133915250319100 ) ) ; +#1506 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000300, 1.758564121058965500, -25.31515713847482400 ) ) ; +#1507 = EDGE_CURVE ( 'NONE', #292, #2659, #1103, .T. ) ; +#1508 = CARTESIAN_POINT ( 'NONE', ( 5.330238917873068700, 11.39986512769659800, -22.38362604191515400 ) ) ; +#1509 = EDGE_CURVE ( 'NONE', #1647, #480, #2170, .T. ) ; +#1510 = DIRECTION ( 'NONE', ( -3.591835788553842200E-016, 0.2588190451025135200, -0.9659258262890702000 ) ) ; +#1511 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2435, #4457, #3663 ), + ( #1226, #4075, #1633 ), + ( #4475, #2034, #4864 ), + ( #2451, #5279, #2843 ), + ( #409, #3265, #827 ), + ( #3679, #1242, #4093 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001109630065227890300, 0.002219260130455780500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7860350693180038200, 1.000000000000000000), + ( 1.000000000000000000, 0.7779990704731638600, 1.000000000000000000), + ( 1.000000000000000000, 0.7699843687027182500, 1.000000000000000000), + ( 1.000000000000000000, 0.7542976144073138000, 1.000000000000000000), + ( 1.000000000000000000, 0.7465652174045796000, 1.000000000000000000), + ( 1.000000000000000000, 0.7392767051441396800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1512 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.65446821274873000, -55.06985442120483000 ) ) ; +#1513 = ORIENTED_EDGE ( 'NONE', *, *, #948, .T. ) ; +#1514 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1515 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666665900, 3.023894846702055000, -31.05974356099691700 ) ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( 4.281308430968149300, 13.21760352614479400, -19.49938734347616500 ) ) ; +#1517 = VERTEX_POINT ( 'NONE', #1621 ) ; +#1518 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 16.50000000000000000 ) ) ; +#1519 = EDGE_CURVE ( 'NONE', #3309, #5264, #1, .T. ) ; +#1520 = ORIENTED_EDGE ( 'NONE', *, *, #2012, .F. ) ; +#1521 = ORIENTED_EDGE ( 'NONE', *, *, #2856, .T. ) ; +#1522 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.969250883056227900, 15.68688548895127600 ) ) ; +#1523 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 13.40741737109299000, -20.21665475151214500 ) ) ; +#1524 = ORIENTED_EDGE ( 'NONE', *, *, #1297, .T. ) ; +#1526 = CARTESIAN_POINT ( 'NONE', ( 6.837758466841485500, -10.00000000000000000, 12.52113835432388600 ) ) ; +#1525 = CARTESIAN_POINT ( 'NONE', ( 2.898570332872967300, 1.057173029444733000, -28.53646598490868400 ) ) ; +#1527 = VERTEX_POINT ( 'NONE', #808 ) ; +#1528 = CARTESIAN_POINT ( 'NONE', ( 6.130247238795117700, 12.98026408872102700, -18.56658365033163300 ) ) ; +#1529 = CARTESIAN_POINT ( 'NONE', ( 19.29464184166487000, 1.451956869417497400, 17.72507855881155300 ) ) ; +#1530 = ORIENTED_EDGE ( 'NONE', *, *, #5277, .F. ) ; +#1531 = CARTESIAN_POINT ( 'NONE', ( 7.071301768446897300, 24.55983271484688400, -59.08803132423984300 ) ) ; +#1532 = CARTESIAN_POINT ( 'NONE', ( 1.262082482480853800E-013, 15.40134457995976900, -25.57244542540393100 ) ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( 6.711733650865814300, -10.00000000000067900, 17.15808841378826000 ) ) ; +#1534 = CIRCLE ( 'NONE', #913, 100.4290542974443400 ) ; +#1535 = AXIS2_PLACEMENT_3D ( 'NONE', #615, #3474, #1037 ) ; +#1536 = ORIENTED_EDGE ( 'NONE', *, *, #2917, .T. ) ; +#1537 = CARTESIAN_POINT ( 'NONE', ( 19.32216797349051200, 8.453563414175711400, 17.66509082459890600 ) ) ; +#1538 = CIRCLE ( 'NONE', #779, 2.500000000000000000 ) ; +#1539 = CARTESIAN_POINT ( 'NONE', ( 1.642234549699781000, 2.439157186646087700, -30.07038610934615300 ) ) ; +#1540 = ORIENTED_EDGE ( 'NONE', *, *, #3475, .T. ) ; +#1542 = CARTESIAN_POINT ( 'NONE', ( 19.40254545185769800, 7.374930898559317600, 17.86153012898823500 ) ) ; +#1541 = CARTESIAN_POINT ( 'NONE', ( 2.523316256928041400, -0.5674352604401251600, -25.36426634578726400 ) ) ; +#1543 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.529450983624549600, 16.50785938879884900 ) ) ; +#1544 = EDGE_CURVE ( 'NONE', #581, #2017, #4206, .T. ) ; +#1545 = CARTESIAN_POINT ( 'NONE', ( 18.25045013104464800, 2.736285505748863300, -30.57673845067767000 ) ) ; +#1546 = CIRCLE ( 'NONE', #1083, 7.500000000000002700 ) ; +#1547 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1548 = ORIENTED_EDGE ( 'NONE', *, *, #2352, .T. ) ; +#1549 = CARTESIAN_POINT ( 'NONE', ( 9.035291451466021000, 13.39259165376544300, -20.27486602473070600 ) ) ; +#1550 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 5.038302160957824700, 17.19569460725401600 ) ) ; +#1551 = CARTESIAN_POINT ( 'NONE', ( 1.657305493190510500, 11.07144222090481000, -56.36261816159074600 ) ) ; +#1552 = EDGE_CURVE ( 'NONE', #1527, #3144, #4347, .T. ) ; +#1553 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999976700, 14.19364074059509000, -23.15088031259203700 ) ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 11.61133011051458800, -5.621177116216768100, 17.51915808026067700 ) ) ; +#1555 = CARTESIAN_POINT ( 'NONE', ( 6.693623537962237100, 23.93284067572440700, -63.24122703613176100 ) ) ; +#1556 = CIRCLE ( 'NONE', #2220, 100.0000000000000100 ) ; +#1557 = AXIS2_PLACEMENT_3D ( 'NONE', #1787, #4622, #2196 ) ; +#1558 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1559 = CYLINDRICAL_SURFACE ( 'NONE', #451, 1.000000000000000900 ) ; +#1560 = CARTESIAN_POINT ( 'NONE', ( 1.347630138270742300, 10.00000000000000000, 15.43848589233078900 ) ) ; +#1561 = CARTESIAN_POINT ( 'NONE', ( 1.642118215323659100, 14.47787489664186300, -26.50735637336208200 ) ) ; +#1562 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999500, 6.489201192633197800, 1.738776219089098100 ) ) ; +#1563 = CYLINDRICAL_SURFACE ( 'NONE', #3859, 0.5800000000000006300 ) ; +#1564 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -9.000000000000005300, -7.499999999999995600 ) ) ; +#1565 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #3227, #789 ) ; +#1566 = CARTESIAN_POINT ( 'NONE', ( 5.169442502185575000, 10.00000000000000200, 18.57234609039331400 ) ) ; +#1567 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -8.673617379884027600E-016 ) ) ; +#1568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( 9.038950224958028900, 20.67913387522997900, -60.63044817685207000 ) ) ; +#1570 = ORIENTED_EDGE ( 'NONE', *, *, #3786, .T. ) ; +#1571 = CARTESIAN_POINT ( 'NONE', ( 1.319016766425119300, 9.999999999999015900, 17.76972068680282400 ) ) ; +#1572 = ORIENTED_EDGE ( 'NONE', *, *, #825, .F. ) ; +#1573 = CARTESIAN_POINT ( 'NONE', ( -0.05080000000000584000, 10.18804067014304400, -45.86502151901292700 ) ) ; +#1574 = EDGE_LOOP ( 'NONE', ( #4168, #2799, #1259, #4064 ) ) ; +#1575 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.474640789571298100, -56.37977905992722300 ) ) ; +#1576 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5110, #4013, #4411 ), + ( #1971, #4802, #2381 ), + ( #5206, #2777, #342 ), + ( #3192, #757, #3611 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0009065014181592406200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.3869539162915053800, 1.000000000000000000), + ( 1.000000000000000000, 0.3869143520433636600, 1.000000000000000000), + ( 1.000000000000000000, 0.3944532028977231800, 1.000000000000000000), + ( 1.000000000000000000, 0.4082482904638641800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1577 = VERTEX_POINT ( 'NONE', #2035 ) ; +#1578 = EDGE_CURVE ( 'NONE', #4551, #687, #5153, .T. ) ; +#1579 = ORIENTED_EDGE ( 'NONE', *, *, #4893, .F. ) ; +#1580 = VERTEX_POINT ( 'NONE', #4995 ) ; +#1581 = EDGE_CURVE ( 'NONE', #1800, #3528, #2057, .T. ) ; +#1582 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144700, 0.9659258262890698700 ) ) ; +#1583 = CARTESIAN_POINT ( 'NONE', ( 17.43638568872430000, 12.80301244803300900, -27.62024312803303200 ) ) ; +#1584 = ORIENTED_EDGE ( 'NONE', *, *, #1175, .T. ) ; +#1585 = CARTESIAN_POINT ( 'NONE', ( 10.06606418709758600, 26.22288906261876600, -59.20471350282317500 ) ) ; +#1586 = ORIENTED_EDGE ( 'NONE', *, *, #2388, .F. ) ; +#1587 = ADVANCED_FACE ( 'NONE', ( #961 ), #4598, .T. ) ; +#1588 = CARTESIAN_POINT ( 'NONE', ( 16.99982966712650200, 1.057173029440010100, -28.53646598491007000 ) ) ; +#1589 = VERTEX_POINT ( 'NONE', #1781 ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( 2.895523481582191700, 3.396366830080330700, -28.01429519440270300 ) ) ; +#1592 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1591 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.457153238772569900, 16.50000000000000000 ) ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( 6.872352358174174100, 7.500000000000008000, 22.50000000000000400 ) ) ; +#1594 = CIRCLE ( 'NONE', #1267, 2.500000000000001800 ) ; +#1595 = VERTEX_POINT ( 'NONE', #2453 ) ; +#1596 = ORIENTED_EDGE ( 'NONE', *, *, #76, .T. ) ; +#1597 = AXIS2_PLACEMENT_3D ( 'NONE', #3178, #745, #3602 ) ; +#1598 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 21.41469698089864700, -54.88551904149871100 ) ) ; +#1599 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.999999999999998200, 12.50000000000000200 ) ) ; +#1600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#1601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890699800, -0.2588190451025143000 ) ) ; +#1602 = VECTOR ( 'NONE', #2105, 1000.000000000000000 ) ; +#1603 = CARTESIAN_POINT ( 'NONE', ( 18.00052025464160700, 8.138803532643237300, 18.86287462303668900 ) ) ; +#1604 = EDGE_LOOP ( 'NONE', ( #5250, #4797 ) ) ; +#1605 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1606 = CARTESIAN_POINT ( 'NONE', ( 12.34893646909384300, 23.75151004134344400, -63.73152323585769400 ) ) ; +#1607 = AXIS2_PLACEMENT_3D ( 'NONE', #3480, #1041, #3896 ) ; +#1608 = CIRCLE ( 'NONE', #3420, 1.000000000000000900 ) ; +#1609 = VERTEX_POINT ( 'NONE', #2189 ) ; +#1610 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2980, #131, #548, #3405, #965, #3823, #1389, #4224 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001870633568756175900, 0.002805950353134266000, 0.003741267137512356500 ), + .UNSPECIFIED. ) ; +#1611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025151900 ) ) ; +#1612 = CIRCLE ( 'NONE', #1817, 100.0000000000000000 ) ; +#1614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8667469317226289500, -0.4987481893194284400 ) ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999500, 7.455127018922267400, 1.997595264191612600 ) ) ; +#1615 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 12.65496680558646100, -55.06972082365661000 ) ) ; +#1616 = ADVANCED_FACE ( 'NONE', ( #5009 ), #848, .T. ) ; +#1617 = EDGE_CURVE ( 'NONE', #4973, #978, #1925, .T. ) ; +#1618 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999500, 23.22519872755273300, -56.85711359142336400 ) ) ; +#1619 = TOROIDAL_SURFACE ( 'NONE', #3772, 101.4290542974443200, 1.000000000000000000 ) ; +#1620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1621 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 23.22519872755274400, -56.85711359142337800 ) ) ; +#1622 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1623 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #5000, #2858, ( #1334 ) ) ; +#1624 = CARTESIAN_POINT ( 'NONE', ( 18.82653108957006400, 23.14605414445811600, -56.56174198617036800 ) ) ; +#1625 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.68991880571509900, -52.91676192399936700 ) ) ; +#1626 = EDGE_CURVE ( 'NONE', #2702, #2906, #2981, .T. ) ; +#1627 = LINE ( 'NONE', #611, #511 ) ; +#1628 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.000000000000003600, 15.31390237722978800 ) ) ; +#1629 = CARTESIAN_POINT ( 'NONE', ( 13.42061672984996100, 21.12056672172526800, -59.68811494885392900 ) ) ; +#1630 = CIRCLE ( 'NONE', #383, 2.499999999999998700 ) ; +#1631 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 3.674647099076123500, -30.76687062793725100 ) ) ; +#1632 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1633 = CARTESIAN_POINT ( 'NONE', ( 17.29326542914547100, 10.00000000000000200, 16.20708147606430000 ) ) ; +#1634 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1635 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000600, 6.945809930289605000, 17.05395098443783700 ) ) ; +#1636 = ORIENTED_EDGE ( 'NONE', *, *, #2081, .F. ) ; +#1637 = AXIS2_PLACEMENT_3D ( 'NONE', #32, #2883, #453 ) ; +#1638 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1639 = CARTESIAN_POINT ( 'NONE', ( 1.688911658535097200, 21.54954335313825100, -53.26717751723806100 ) ) ; +#1640 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.847791768918440900, 16.04435452916443000 ) ) ; +#1641 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824611600, 23.52613638748768200, -57.98022822821118200 ) ) ; +#1642 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3526, #4344, #3117, #684, #3543, #1108, #3960, #1526, #4360, #1921 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002333889914117752900, 0.004667779828235505700, 0.007001669742353259000, 0.009335559656471011400 ), + .UNSPECIFIED. ) ; +#1643 = ADVANCED_FACE ( 'NONE', ( #3121, #2871 ), #2992, .T. ) ; +#1644 = VERTEX_POINT ( 'NONE', #1404 ) ; +#1645 = VERTEX_POINT ( 'NONE', #580 ) ; +#1646 = EDGE_CURVE ( 'NONE', #29, #2252, #3527, .T. ) ; +#1647 = VERTEX_POINT ( 'NONE', #3011 ) ; +#1648 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#1649 = VERTEX_POINT ( 'NONE', #4649 ) ; +#1650 = AXIS2_PLACEMENT_3D ( 'NONE', #905, #3764, #1317 ) ; +#1651 = DATE_TIME_ROLE ( 'creation_date' ) ; +#1652 = EDGE_CURVE ( 'NONE', #4035, #3942, #2744, .T. ) ; +#1653 = ORIENTED_EDGE ( 'NONE', *, *, #1089, .F. ) ; +#1654 = DIRECTION ( 'NONE', ( 1.550295792099848300E-015, -0.4104047869209408500, 0.9119034547979174600 ) ) ; +#1655 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333340300, 21.37922248559113900, -52.73206355963677800 ) ) ; +#1656 = CARTESIAN_POINT ( 'NONE', ( -1.013732589710847600E-014, 8.340986170761423700, 17.41688509028425400 ) ) ; +#1657 = ORIENTED_EDGE ( 'NONE', *, *, #1399, .F. ) ; +#1658 = CYLINDRICAL_SURFACE ( 'NONE', #2018, 1.000000000000000900 ) ; +#1659 = ORIENTED_EDGE ( 'NONE', *, *, #4532, .T. ) ; +#1660 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .F. ) ; +#1661 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.46919465059541600, -24.57905964396691800 ) ) ; +#1662 = CARTESIAN_POINT ( 'NONE', ( 0.5221068488340090400, 2.299953018868691400, 17.82677562893377400 ) ) ; +#1663 = ADVANCED_FACE ( 'NONE', ( #4899 ), #566, .T. ) ; +#1664 = FACE_OUTER_BOUND ( 'NONE', #4112, .T. ) ; +#1665 = ORIENTED_EDGE ( 'NONE', *, *, #4525, .F. ) ; +#1666 = CARTESIAN_POINT ( 'NONE', ( 13.20710027103462300, 13.97433340896694700, -65.90880809927182300 ) ) ; +#1667 = CARTESIAN_POINT ( 'NONE', ( 16.10158378168096500, 12.35950064796978200, -63.62628437440491800 ) ) ; +#1668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890699800 ) ) ; +#1669 = LINE ( 'NONE', #2392, #4768 ) ; +#1670 = ORIENTED_EDGE ( 'NONE', *, *, #560, .F. ) ; +#1671 = CARTESIAN_POINT ( 'NONE', ( 6.872352358174182100, 10.00000000000000400, 20.00000000000001400 ) ) ; +#1672 = LOCAL_TIME ( 15, 6, 45.00000000000000000, #2736 ) ; +#1673 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4485, #2047, #838 ), + ( #3689, #1250, #4103 ), + ( #1661, #4499, #2063 ), + ( #4888, #2477, #15 ), + ( #2872, #437, #3289 ), + ( #852, #3708, #1265 ), + ( #4113, #1676, #4516 ), + ( #2076, #4903, #2494 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -1.355252715606880500E-019, 0.001788840144661174000, 0.002683260216991761200, 0.003577680289322347900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865472400, 1.000000000000000000), + ( 1.000000000000000000, 0.6509091694223319000, 1.000000000000000000), + ( 1.000000000000000000, 0.5921246132172481900, 1.000000000000000000), + ( 1.000000000000000000, 0.5114214142152553300, 1.000000000000000000), + ( 1.000000000000000000, 0.4858207451467706500, 1.000000000000000000), + ( 1.000000000000000000, 0.4409635493728545400, 1.000000000000000000), + ( 1.000000000000000000, 0.4217543166518237800, 1.000000000000000000), + ( 1.000000000000000000, 0.4082482904638629600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1674 = EDGE_CURVE ( 'NONE', #2134, #5060, #2092, .T. ) ; +#1675 = FACE_OUTER_BOUND ( 'NONE', #4121, .T. ) ; +#1676 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 15.85364014215215200, -26.34694761689129500 ) ) ; +#1677 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.674647099076365100, -30.76687062793714800 ) ) ; +#1678 = EDGE_CURVE ( 'NONE', #3220, #4616, #1784, .T. ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( 8.244241757279832300, 14.63040339311449300, -66.42508688618546800 ) ) ; +#1680 = CARTESIAN_POINT ( 'NONE', ( 12.80741479370681500, 14.88356615214801500, -61.65489224818341500 ) ) ; +#1681 = FACE_OUTER_BOUND ( 'NONE', #3539, .T. ) ; +#1682 = AXIS2_PLACEMENT_3D ( 'NONE', #3868, #1431, #4267 ) ; +#1683 = CARTESIAN_POINT ( 'NONE', ( 14.18874031935734700, 1.400365465220170700, -24.76277282551791000 ) ) ; +#1684 = VECTOR ( 'NONE', #4660, 999.9999999999998900 ) ; +#1685 = ADVANCED_FACE ( 'NONE', ( #3834 ), #2608, .T. ) ; +#1686 = ORIENTED_EDGE ( 'NONE', *, *, #1835, .F. ) ; +#1687 = AXIS2_PLACEMENT_3D ( 'NONE', #604, #3459, #1021 ) ; +#1688 = CARTESIAN_POINT ( 'NONE', ( 13.02604764182589700, 10.00000000000000400, 19.99999999999995000 ) ) ; +#1689 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999800, 4.999999999999995600, 1.004216362529351200E-015 ) ) ; +#1690 = ORIENTED_EDGE ( 'NONE', *, *, #2753, .F. ) ; +#1691 = CARTESIAN_POINT ( 'NONE', ( 3.530980904782807400, 12.25695974379088000, -63.24359651015519300 ) ) ; +#1692 = ORIENTED_EDGE ( 'NONE', *, *, #4248, .T. ) ; +#1693 = CARTESIAN_POINT ( 'NONE', ( 10.67851143176958400, 10.50520475790439800, -63.42670996135910900 ) ) ; +#1694 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1069, #4654, #4321, #1881 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.001437042962723526700, 0.002275683785429698400 ), + .UNSPECIFIED. ) ; +#1695 = AXIS2_PLACEMENT_3D ( 'NONE', #3698, #1257, #4109 ) ; +#1696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144700, 0.9659258262890698700 ) ) ; +#1697 = ORIENTED_EDGE ( 'NONE', *, *, #4893, .T. ) ; +#1698 = CARTESIAN_POINT ( 'NONE', ( 12.91129862093824000, 12.90766054351969100, -18.27392000326986100 ) ) ; +#1699 = CARTESIAN_POINT ( 'NONE', ( 19.26750212360586500, 1.228352012260941500, 17.70307305905134900 ) ) ; +#1700 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1701 = ORIENTED_EDGE ( 'NONE', *, *, #2641, .F. ) ; +#1702 = VERTEX_POINT ( 'NONE', #4297 ) ; +#1703 = ORIENTED_EDGE ( 'NONE', *, *, #1617, .T. ) ; +#1704 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3751, #58, #2909, #1307 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 5.553457650952620600, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9561149059751438100, 0.9561149059751438100, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#1705 = ORIENTED_EDGE ( 'NONE', *, *, #2468, .T. ) ; +#1706 = EDGE_CURVE ( 'NONE', #480, #114, #3810, .T. ) ; +#1707 = CARTESIAN_POINT ( 'NONE', ( 1.478343607778961100, 22.34225301360702400, -54.80826108802543200 ) ) ; +#1708 = ADVANCED_FACE ( 'NONE', ( #3718 ), #452, .T. ) ; +#1709 = EDGE_LOOP ( 'NONE', ( #5025, #3818, #1203, #4005, #1548, #4077, #1703, #3024, #2852, #2401, #1940, #546, #1196, #735, #1540, #5255, #1697, #1408, #4979, #1584, #1716, #2714, #1192, #2881, #436 ) ) ; +#1710 = EDGE_CURVE ( 'NONE', #3255, #4518, #1556, .T. ) ; +#1711 = DIRECTION ( 'NONE', ( -0.7761064337101378800, -0.6306019374801598000, 0.0000000000000000000 ) ) ; +#1712 = CARTESIAN_POINT ( 'NONE', ( 10.25351158821576400, 14.90777790183026500, -66.60436833706913300 ) ) ; +#1713 = FACE_OUTER_BOUND ( 'NONE', #4604, .T. ) ; +#1714 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#1715 = EDGE_LOOP ( 'NONE', ( #1219, #536, #755, #4668, #667, #4125, #4696, #4968 ) ) ; +#1716 = ORIENTED_EDGE ( 'NONE', *, *, #502, .T. ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( 14.20767589553114300, 13.73414098447363500, -21.48523546690810100 ) ) ; +#1718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1719 = FACE_OUTER_BOUND ( 'NONE', #4991, .T. ) ; +#1720 = ORIENTED_EDGE ( 'NONE', *, *, #911, .F. ) ; +#1721 = CIRCLE ( 'NONE', #3714, 10.00000000000000500 ) ; +#1722 = ORIENTED_EDGE ( 'NONE', *, *, #3659, .T. ) ; +#1723 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1724 = FACE_OUTER_BOUND ( 'NONE', #5179, .T. ) ; +#1725 = CARTESIAN_POINT ( 'NONE', ( 8.367802924171091000, 15.33202897545130100, -61.94602226466819400 ) ) ; +#1726 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 18.09635858759372700, -66.49999999999997200 ) ) ; +#1727 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2195, #2997, #4244, #1806 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.398578778534940500E-017, 0.0008417482326424503500 ), + .UNSPECIFIED. ) ; +#1728 = CARTESIAN_POINT ( 'NONE', ( 17.27482914232658100, 3.845360256145209400, -28.81127175096030900 ) ) ; +#1729 = LINE ( 'NONE', #2427, #509 ) ; +#1730 = DIRECTION ( 'NONE', ( -0.1006687319876534000, -0.2575042443533941400, 0.9610189230915203700 ) ) ; +#1731 = DIRECTION ( 'NONE', ( -3.835815458611690100E-015, -0.4104047869209366800, 0.9119034547979191200 ) ) ; +#1732 = ADVANCED_FACE ( 'NONE', ( #1675 ), #711, .T. ) ; +#1733 = EDGE_CURVE ( 'NONE', #1595, #4965, #4633, .T. ) ; +#1734 = CYLINDRICAL_SURFACE ( 'NONE', #4345, 1.000000000000000000 ) ; +#1735 = AXIS2_PLACEMENT_3D ( 'NONE', #3426, #989, #3844 ) ; +#1736 = EDGE_CURVE ( 'NONE', #5033, #2803, #4779, .T. ) ; +#1737 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#1738 = CIRCLE ( 'NONE', #2924, 7.499999999999999100 ) ; +#1739 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1740 = CARTESIAN_POINT ( 'NONE', ( 7.867609589172174900, 11.15071312509178700, -62.98650958092820700 ) ) ; +#1741 = CARTESIAN_POINT ( 'NONE', ( 6.879471739277625500, 14.80143007828702500, -61.59377488193288000 ) ) ; +#1742 = AXIS2_PLACEMENT_3D ( 'NONE', #4442, #2006, #4842 ) ; +#1743 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1744 = CARTESIAN_POINT ( 'NONE', ( 9.241657729248764500, 23.49372721568518000, -64.27026267510791500 ) ) ; +#1745 = ORIENTED_EDGE ( 'NONE', *, *, #2276, .T. ) ; +#1746 = ORIENTED_EDGE ( 'NONE', *, *, #413, .F. ) ; +#1747 = ORIENTED_EDGE ( 'NONE', *, *, #1945, .T. ) ; +#1748 = ORIENTED_EDGE ( 'NONE', *, *, #2609, .F. ) ; +#1749 = ADVANCED_FACE ( 'NONE', ( #326 ), #2501, .T. ) ; +#1750 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #286, #4742, #3131 ), + ( #698, #3558, #1118 ), + ( #3973, #1533, #4372 ), + ( #1934, #4766, #2342 ), + ( #5170, #2742, #304 ), + ( #3149, #722, #3579 ), + ( #1139, #3992, #1554 ), + ( #4392, #1952, #4785 ), + ( #2365, #5188, #2757 ), + ( #323, #3170, #740 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.084202172485504400E-019, 0.002333889914117752400, 0.004667779828235504900, 0.007001669742353257300, 0.009335559656471009700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7211689687186047000, 1.000000000000000000), + ( 1.000000000000000000, 0.7331588725907366400, 1.000000000000000000), + ( 1.000000000000000000, 0.7497912178583287000, 1.000000000000000000), + ( 1.000000000000000000, 0.7543444794845717300, 1.000000000000000000), + ( 1.000000000000000000, 0.7543444794845717300, 1.000000000000000000), + ( 1.000000000000000000, 0.7497912178583287000, 1.000000000000000000), + ( 1.000000000000000000, 0.7331588725907366400, 1.000000000000000000), + ( 1.000000000000000000, 0.7211689687186047000, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1751 = ORIENTED_EDGE ( 'NONE', *, *, #4328, .T. ) ; +#1752 = CARTESIAN_POINT ( 'NONE', ( 4.285311188840098300, 12.62371817786867100, -64.17788210232375000 ) ) ; +#1753 = ORIENTED_EDGE ( 'NONE', *, *, #2204, .F. ) ; +#1754 = CARTESIAN_POINT ( 'NONE', ( 14.19280651674821300, 14.32486306764733700, -61.04130299497527500 ) ) ; +#1755 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.77489008581955000, -26.94531476495732700 ) ) ; +#1756 = CARTESIAN_POINT ( 'NONE', ( 13.47480809363795900, 23.98925314755050000, -63.05590937678289300 ) ) ; +#1757 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 2.312964634635743900E-016, 1.000000000000000000 ) ) ; +#1758 = ORIENTED_EDGE ( 'NONE', *, *, #1792, .F. ) ; +#1759 = EDGE_CURVE ( 'NONE', #3066, #4500, #964, .T. ) ; +#1760 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 20.00000000000000400 ) ) ; +#1761 = EDGE_CURVE ( 'NONE', #2906, #605, #3590, .T. ) ; +#1762 = VERTEX_POINT ( 'NONE', #1426 ) ; +#1763 = FACE_OUTER_BOUND ( 'NONE', #309, .T. ) ; +#1764 = EDGE_CURVE ( 'NONE', #3000, #4936, #183, .T. ) ; +#1765 = ORIENTED_EDGE ( 'NONE', *, *, #2798, .T. ) ; +#1766 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1767 = CYLINDRICAL_SURFACE ( 'NONE', #4149, 7.499999999999998200 ) ; +#1768 = CARTESIAN_POINT ( 'NONE', ( 1.657556201818088700, 2.604806657878217200, -30.33070071354233500 ) ) ; +#1769 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1770 = ORIENTED_EDGE ( 'NONE', *, *, #4291, .T. ) ; +#1771 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 2.453153651169694100, -28.69439502805796500 ) ) ; +#1772 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1773 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999400, 12.86880769682978200, -27.86379997321719400 ) ) ; +#1774 = ADVANCED_FACE ( 'NONE', ( #2376 ), #3994, .T. ) ; +#1775 = CIRCLE ( 'NONE', #516, 2.499999999999998200 ) ; +#1776 = AXIS2_PLACEMENT_3D ( 'NONE', #336, #3187, #754 ) ; +#1777 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#1778 = ORIENTED_EDGE ( 'NONE', *, *, #2854, .T. ) ; +#1779 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1780 = LINE ( 'NONE', #1400, #4894 ) ; +#1781 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824612200, 21.11132182176492800, -58.62727584096747100 ) ) ; +#1782 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1572006963833898800, 0.9875666767649551300 ) ) ; +#1783 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.318741722734092300, -55.96365964037531900 ) ) ; +#1784 = CIRCLE ( 'NONE', #2504, 2.500000000000000000 ) ; +#1785 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, 4.650775477637216300, -30.32756122834777200 ) ) ; +#1786 = DIRECTION ( 'NONE', ( 0.7499999999999995600, 0.1711927069771163600, -0.6388998803238641300 ) ) ; +#1787 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766140300, 10.99260280537033600, -20.86370236426842700 ) ) ; +#1788 = CARTESIAN_POINT ( 'NONE', ( -6.465885475228245300E-013, 1.133276031635069200, -29.95686141913570900 ) ) ; +#1789 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 17.50000000000000000 ) ) ; +#1790 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 18.09635858759372700, -61.37627564304205000 ) ) ; +#1791 = CIRCLE ( 'NONE', #2724, 5.000000000000000000 ) ; +#1792 = EDGE_CURVE ( 'NONE', #3856, #4371, #1694, .T. ) ; +#1793 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 9.000000000000003600, 15.31390237722978800 ) ) ; +#1794 = CYLINDRICAL_SURFACE ( 'NONE', #1954, 1.000000000000000900 ) ; +#1795 = AXIS2_PLACEMENT_3D ( 'NONE', #1825, #4658, #2237 ) ; +#1796 = EDGE_CURVE ( 'NONE', #348, #1017, #2232, .T. ) ; +#1797 = ADVANCED_FACE ( 'NONE', ( #56 ), #4415, .T. ) ; +#1798 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 22.50000000000000400 ) ) ; +#1799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -5.336081739632281400E-015, -1.000000000000000000 ) ) ; +#1800 = VERTEX_POINT ( 'NONE', #2688 ) ; +#1801 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1802 = DIRECTION ( 'NONE', ( 8.979589471384648700E-017, 0.2588190451025148600, -0.9659258262890698700 ) ) ; +#1803 = CARTESIAN_POINT ( 'NONE', ( 18.89840000000003800, 10.00000000000000200, 15.31390237722989800 ) ) ; +#1804 = AXIS2_PLACEMENT_3D ( 'NONE', #5036, #2619, #174 ) ; +#1805 = ORIENTED_EDGE ( 'NONE', *, *, #4128, .F. ) ; +#1806 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666667000, 14.65750343616706700, -27.64626655298182500 ) ) ; +#1807 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.534074173710875000, -7.911053935975259000 ) ) ; +#1808 = ORIENTED_EDGE ( 'NONE', *, *, #3963, .F. ) ; +#1809 = CARTESIAN_POINT ( 'NONE', ( 9.043172765851375400, 11.03378180065448600, -20.90596702270215000 ) ) ; +#1810 = CARTESIAN_POINT ( 'NONE', ( 0.3441616842057597100, 7.786564234805954500, 17.71716636108226300 ) ) ; +#1811 = VERTEX_POINT ( 'NONE', #3939 ) ; +#1812 = DIRECTION ( 'NONE', ( -0.7899916495555927600, -7.090596649137489700E-017, -0.6131176017962896000 ) ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( 14.55928160821659400, 21.19137201089375100, -58.92602721395172000 ) ) ; +#1814 = CARTESIAN_POINT ( 'NONE', ( 10.52920000000000100, 5.000000000000000000, 16.50000000000000000 ) ) ; +#1815 = EDGE_LOOP ( 'NONE', ( #2201, #4067, #3495, #998 ) ) ; +#1816 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2944, #960, #2185 ), + ( #5007, #2593, #141 ), + ( #2989, #556, #3416 ), + ( #976, #3833, #1398 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0009065014181572892700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4082482904638623500, 1.000000000000000000), + ( 1.000000000000000000, 0.3944532028975415400, 1.000000000000000000), + ( 1.000000000000000000, 0.3869143520433819300, 1.000000000000000000), + ( 1.000000000000000000, 0.3869539162915010500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1817 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #3243, #807 ) ; +#1818 = VERTEX_POINT ( 'NONE', #1502 ) ; +#1819 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, 4.650775477637227900, -30.32756122834776800 ) ) ; +#1820 = EDGE_LOOP ( 'NONE', ( #3344, #3036, #1387, #3230, #3148, #384, #662, #3153, #4963, #4692 ) ) ; +#1821 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999999400, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1822 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1823 = VERTEX_POINT ( 'NONE', #5117 ) ; +#1824 = CARTESIAN_POINT ( 'NONE', ( 18.61393486205818000, 1.093223501013914000, -28.39632942611378800 ) ) ; +#1825 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999999400, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1826 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1827 = LINE ( 'NONE', #517, #1973 ) ; +#1828 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000007400, -88.81885793164890700, -72.39384004447242700 ) ) ; +#1829 = VERTEX_POINT ( 'NONE', #663 ) ; +#1830 = CARTESIAN_POINT ( 'NONE', ( 0.5229132578581122700, 2.226242674034454500, 17.82598754161711700 ) ) ; +#1831 = EDGE_LOOP ( 'NONE', ( #1068, #2768, #2493, #818 ) ) ; +#1832 = EDGE_CURVE ( 'NONE', #742, #800, #1169, .T. ) ; +#1833 = CARTESIAN_POINT ( 'NONE', ( 7.707722665353806200, 20.89959174578871900, -60.28437125805454100 ) ) ; +#1834 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1835 = EDGE_CURVE ( 'NONE', #590, #3066, #3321, .T. ) ; +#1836 = FACE_OUTER_BOUND ( 'NONE', #488, .T. ) ; +#1837 = ORIENTED_EDGE ( 'NONE', *, *, #4948, .T. ) ; +#1838 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.650775477637227900, -30.32756122834776800 ) ) ; +#1839 = CARTESIAN_POINT ( 'NONE', ( 18.24109450680949600, 11.07144222090479400, -56.36261816159071700 ) ) ; +#1840 = AXIS2_PLACEMENT_3D ( 'NONE', #4167, #1731, #4566 ) ; +#1841 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1842 = CIRCLE ( 'NONE', #699, 2.499999999999998700 ) ; +#1843 = CARTESIAN_POINT ( 'NONE', ( 1.304566226053706500, 11.16749793204112800, -58.73076030109545800 ) ) ; +#1844 = CLOSED_SHELL ( 'NONE', ( #2079, #10, #3260, #1732, #1708, #1797, #2413, #833, #1184, #1260, #4849, #3691, #158, #4614, #803, #3784, #2124, #4934, #4978, #370, #4910, #1332, #4158, #2577, #60, #4487, #1587, #855, #4552, #2106, #5006, #2226, #4259, #1000, #3234, #3836, #778, #33, #5216, #3809, #4139, #515, #2597, #3306, #4824, #4962, #1643, #4115, #188, #2534, #947, #4640, #1616, #2059, #878, #2556, #2850, #2988, #3615, #3669, #2175, #4510, #2916, #4465, #2958, #1415, #3644, #106, #563, #2894, #4572, #3402, #345, #3771, #401, #540, #592, #1308, #2824, #1359, #3283, #5027, #467, #2010, #2150, #4098, #4231, #1286, #2801, #2938, #4872, #1774, #450, #4021, #493, #4071, #4203, #2874, #2621, #3333, #1212, #3381, #1663, #3432, #2509, #4052, #4179, #2464, #972, #1685, #3206, #3352, #5272, #127, #2488, #3869, #903, #2445, #4593, #4890, #3009, #3741, #5248, #1749, #423, #2200, #4530, #4434, #926, #1238, #1385, #3720, #1984, #78, #2031 ) ) ; +#1845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1846 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000968900, 20.78604697036731300, -53.15220561627323500 ) ) ; +#1847 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1848 = VECTOR ( 'NONE', #1622, 1000.000000000000000 ) ; +#1849 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1850 = CARTESIAN_POINT ( 'NONE', ( -2.064704699612060400E-014, 5.040792486620284200, 17.69676883205245200 ) ) ; +#1851 = AXIS2_PLACEMENT_3D ( 'NONE', #3583, #2347, #726 ) ; +#1852 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -10.00000000000000400, -7.499999999999995600 ) ) ; +#1853 = TOROIDAL_SURFACE ( 'NONE', #2929, 4.000000000000000000, 1.000000000000000000 ) ; +#1854 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333800, 21.66487829819825000, -53.52313491720788400 ) ) ; +#1855 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 12.01008583117608100, -57.71083691575710600 ) ) ; +#1856 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 16.26997072649156500, -27.21420724471780500 ) ) ; +#1857 = LINE ( 'NONE', #3510, #3909 ) ; +#1858 = CARTESIAN_POINT ( 'NONE', ( 1.217580031662904000, 0.2696538994213607500, -26.96888917084740100 ) ) ; +#1859 = AXIS2_PLACEMENT_3D ( 'NONE', #1874, #4708, #2288 ) ; +#1860 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999951600, 1.358343471931791500, -26.90678312694869900 ) ) ; +#1861 = CARTESIAN_POINT ( 'NONE', ( 3.164317624111272100E-013, 9.735072307076842800, -56.83091926820041800 ) ) ; +#1862 = FACE_OUTER_BOUND ( 'NONE', #2072, .T. ) ; +#1863 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, 24.01142209705481200, -59.79133915250319100 ) ) ; +#1864 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999998800, 15.97827867187473500, -26.56442273453175000 ) ) ; +#1865 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 19.85087708119871100, -53.92323202904125900 ) ) ; +#1866 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 20.00000000000000400 ) ) ; +#1867 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.14722090442170600, -62.70239308847840200 ) ) ; +#1868 = EDGE_CURVE ( 'NONE', #5054, #447, #3197, .T. ) ; +#1869 = CARTESIAN_POINT ( 'NONE', ( 14.72857319809943500, 10.00000000000000200, 18.57268940334120800 ) ) ; +#1870 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025122500, 0.9659258262890706400 ) ) ; +#1871 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 110.0000000000000000, 5.665249758739311600 ) ) ; +#1872 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.000000000000001800, -7.500000000000000900 ) ) ; +#1873 = CARTESIAN_POINT ( 'NONE', ( -6.505213034913026600E-016, 13.77489008581955200, -26.94531476495732700 ) ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#1875 = VERTEX_POINT ( 'NONE', #3540 ) ; +#1876 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #703, #424, ( #1334 ) ) ; +#1877 = EDGE_CURVE ( 'NONE', #1595, #1263, #4152, .T. ) ; +#1878 = ORIENTED_EDGE ( 'NONE', *, *, #111, .T. ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 19.65546469306328300, -53.19394306809146400 ) ) ; +#1880 = ORIENTED_EDGE ( 'NONE', *, *, #1297, .F. ) ; +#1881 = CARTESIAN_POINT ( 'NONE', ( 18.68693447853213400, 8.089255650988798500, 18.23223304703364200 ) ) ; +#1882 = ORIENTED_EDGE ( 'NONE', *, *, #2441, .T. ) ; +#1884 = CARTESIAN_POINT ( 'NONE', ( 0.6433643703168519000, 8.968249737906274900, 17.37996765091341800 ) ) ; +#1883 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000200, 2.762743644278209400, -31.17727541485819700 ) ) ; +#1885 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000163300, 16.11407165963877500, -26.79808782512745300 ) ) ; +#1886 = CARTESIAN_POINT ( 'NONE', ( 6.872352358174180300, 7.500000000000003600, 20.00000000000001100 ) ) ; +#1887 = ORIENTED_EDGE ( 'NONE', *, *, #526, .F. ) ; +#1888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9119034547979186800, -0.4104047869209376300 ) ) ; +#1889 = ORIENTED_EDGE ( 'NONE', *, *, #1478, .T. ) ; +#1890 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5058, #2636, #1450 ), + ( #4284, #1846, #4677 ), + ( #2258, #5078, #2657 ), + ( #214, #3057, #628 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.005899743711341272200, 0.006909770291284415000 ), + ( 0.4660998205150180800, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.8577841975454656400, 0.8474406165857426600, 1.000000000000000000), + ( 0.8577835552152617300, 0.8474399275378439200, 1.000000000000000000), + ( 0.8566046347851018500, 0.8461752623542602200, 1.000000000000000000), + ( 0.8542265893537608300, 0.8436242579055635000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1891 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.68991880571509900, -52.91676192399936700 ) ) ; +#1892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025177400, 0.9659258262890690900 ) ) ; +#1893 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753871700, 21.11132182176492800, -58.62727584096747800 ) ) ; +#1894 = CARTESIAN_POINT ( 'NONE', ( 10.54889440249087000, 12.80486644046183800, -17.85295621771088600 ) ) ; +#1895 = ORIENTED_EDGE ( 'NONE', *, *, #229, .F. ) ; +#1896 = AXIS2_PLACEMENT_3D ( 'NONE', #2840, #405, #3259 ) ; +#1897 = ORIENTED_EDGE ( 'NONE', *, *, #5267, .F. ) ; +#1898 = CARTESIAN_POINT ( 'NONE', ( 1.145097620481681400, 0.7411525351755189300, -27.90362600192055000 ) ) ; +#1899 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1900 = LINE ( 'NONE', #3079, #829 ) ; +#1901 = EDGE_CURVE ( 'NONE', #480, #4030, #2135, .T. ) ; +#1902 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1903 = ORIENTED_EDGE ( 'NONE', *, *, #4498, .F. ) ; +#1904 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.77489008581955000, -26.94531476495732700 ) ) ; +#1905 = CARTESIAN_POINT ( 'NONE', ( 5.684687841079605300, 13.73532693980172500, -21.48933748692607200 ) ) ; +#1906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1907 = FACE_OUTER_BOUND ( 'NONE', #4235, .T. ) ; +#1908 = DIRECTION ( 'NONE', ( 2.580943047033863100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1909 = CARTESIAN_POINT ( 'NONE', ( 18.20950058308572700, 2.769310375077750600, -30.56045493005532900 ) ) ; +#1910 = EDGE_CURVE ( 'NONE', #868, #3223, #1026, .T. ) ; +#1911 = EDGE_LOOP ( 'NONE', ( #1758, #3621, #2789, #1657 ) ) ; +#1912 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338499100, 24.01142209705481500, -59.79133915250319100 ) ) ; +#1913 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338607400, 13.40741737109299000, -20.21665475151214500 ) ) ; +#1914 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#1915 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 9.613100895799831800, 16.39997667394908400 ) ) ; +#1916 = PERSON_AND_ORGANIZATION ( #4449, #3515 ) ; +#1917 = AXIS2_PLACEMENT_3D ( 'NONE', #4724, #2306, #5135 ) ; +#1918 = DIRECTION ( 'NONE', ( 4.489794735692288200E-016, 0.2588190451025127500, -0.9659258262890706400 ) ) ; +#1919 = VECTOR ( 'NONE', #2449, 1000.000000000000100 ) ; +#1921 = CARTESIAN_POINT ( 'NONE', ( 5.281972922924028400, -9.999999999999998200, 12.50000000000000200 ) ) ; +#1920 = CARTESIAN_POINT ( 'NONE', ( 3.335179581076992400, 2.862184343470196300, -27.09485569630940200 ) ) ; +#1922 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4854, #1639, #4095, #1655 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.770031522344853700E-018, 0.0008417482326425144300 ), + .UNSPECIFIED. ) ; +#1923 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1924 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.81382236340626200, -56.23255212013582800 ) ) ; +#1925 = LINE ( 'NONE', #982, #3975 ) ; +#1926 = CARTESIAN_POINT ( 'NONE', ( 7.084985429037917700, 11.15309637802778500, -21.40536134904943900 ) ) ; +#1927 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 2.260092994753636100, 17.54268287008388000 ) ) ; +#1928 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, -0.8012911872732813000, -24.53576872606914300 ) ) ; +#1929 = AXIS2_PLACEMENT_3D ( 'NONE', #1077, #5105, #652 ) ; +#1930 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999000, 13.81897016439287800, -27.08930131343858600 ) ) ; +#1931 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.57862661804957000, -25.46702996933653700 ) ) ; +#1932 = CYLINDRICAL_SURFACE ( 'NONE', #1371, 6.123724356957925600 ) ; +#1933 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4304, #1051, #629, #1865 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0007559763663257925100 ), + .UNSPECIFIED. ) ; +#1934 = CARTESIAN_POINT ( 'NONE', ( 8.393310107512839100, -9.999999999999998200, 12.55747423926831100 ) ) ; +#1935 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.072138043605500400, 16.83448029338049100 ) ) ; +#1936 = FACE_OUTER_BOUND ( 'NONE', #3577, .T. ) ; +#1937 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999998500, 4.999999999999995600, -3.207846720045877600E-016 ) ) ; +#1938 = CARTESIAN_POINT ( 'NONE', ( 4.335867529935336900, -0.009352518390701487400, -26.40385705545940100 ) ) ; +#1939 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.072138051126930900, 16.83448030209102300 ) ) ; +#1940 = ORIENTED_EDGE ( 'NONE', *, *, #108, .T. ) ; +#1941 = CARTESIAN_POINT ( 'NONE', ( 17.43658312880235800, 4.414091949711691500, -29.87006775781596700 ) ) ; +#1942 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 22.50000000000000400 ) ) ; +#1943 = EDGE_CURVE ( 'NONE', #2659, #925, #1996, .T. ) ; +#1944 = CARTESIAN_POINT ( 'NONE', ( 9.341366070265943100, 12.80807976335135300, -17.86624737360347800 ) ) ; +#1945 = EDGE_CURVE ( 'NONE', #3179, #3233, #901, .T. ) ; +#1946 = CARTESIAN_POINT ( 'NONE', ( 19.49731485905132500, 5.041133175896531400, 17.99692471978633900 ) ) ; +#1947 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666667000, 21.66487829819825700, -53.52313491720793300 ) ) ; +#1948 = ORIENTED_EDGE ( 'NONE', *, *, #3249, .T. ) ; +#1949 = CARTESIAN_POINT ( 'NONE', ( 1.211465521467867800, 8.089255650988796700, 18.23223304703364200 ) ) ; +#1950 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999999000, 12.85037919372190100, -55.79900978460646100 ) ) ; +#1951 = ORIENTED_EDGE ( 'NONE', *, *, #3544, .T. ) ; +#1952 = CARTESIAN_POINT ( 'NONE', ( 13.18666634913316400, -10.00000000000067900, 17.15808841378826000 ) ) ; +#1953 = CARTESIAN_POINT ( 'NONE', ( 8.604578075419336600, 25.29671018643395200, -59.38342450421763600 ) ) ; +#1954 = AXIS2_PLACEMENT_3D ( 'NONE', #4195, #1757, #2576 ) ; +#1955 = EDGE_LOOP ( 'NONE', ( #3928, #3647, #3012, #4869 ) ) ; +#1956 = ORIENTED_EDGE ( 'NONE', *, *, #297, .F. ) ; +#1957 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.958309550455946000, -30.44737578434812200 ) ) ; +#1958 = ORIENTED_EDGE ( 'NONE', *, *, #5237, .F. ) ; +#1959 = CARTESIAN_POINT ( 'NONE', ( 18.20926705211703800, 2.770955885698144400, -30.56289577066203100 ) ) ; +#1960 = EDGE_LOOP ( 'NONE', ( #3640, #3922, #1254, #612 ) ) ; +#1961 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 22.25927290126367100, -57.11593263652589100 ) ) ; +#1962 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.298510400299580200E-032, -1.325001034533938900E-016 ) ) ; +#1963 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4707, #2627, #245, #3085, #657, #3520, #1080, #3933, #1497, #4336, #1894, #4722, #2304, #5131, #2699, #267, #3106, #678, #3534, #1100, #3951, #1516, #4352, #1913 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001813804198288744600, 0.003627608396577489200, 0.004534510495721859700, 0.005441412594866230600, 0.007255216793154966300, 0.008162118892299334600, 0.009069020991443702000, 0.01088282518973243700, 0.01178972728887680100, 0.01269662938802116600, 0.01451043358630990000 ), + .UNSPECIFIED. ) ; +#1964 = AXIS2_PLACEMENT_3D ( 'NONE', #1798, #2611, #167 ) ; +#1965 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 110.0000000000000000, 5.665249758739311600 ) ) ; +#1966 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 0.0000000000000000000, 17.50000000000000000 ) ) ; +#1967 = ORIENTED_EDGE ( 'NONE', *, *, #2644, .T. ) ; +#1968 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000001300, 20.68991880571508800, -52.91676192399935300 ) ) ; +#1969 = CARTESIAN_POINT ( 'NONE', ( 4.353041241422136700, 10.00000000000000400, 20.17773972018810000 ) ) ; +#1970 = CARTESIAN_POINT ( 'NONE', ( 4.745564981063862900, 8.481179221426195600, 21.24382547782081300 ) ) ; +#1971 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.76821830017743800, -53.20897961490040000 ) ) ; +#1972 = CARTESIAN_POINT ( 'NONE', ( 8.735533633289652000, 23.54685683911626600, -64.16843128411534300 ) ) ; +#1973 = VECTOR ( 'NONE', #2947, 999.9999999999998900 ) ; +#1974 = AXIS2_PLACEMENT_3D ( 'NONE', #4880, #1245, #2470 ) ; +#1975 = ORIENTED_EDGE ( 'NONE', *, *, #4223, .T. ) ; +#1976 = ORIENTED_EDGE ( 'NONE', *, *, #2946, .F. ) ; +#1977 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 19.65546469306328300, -53.19394306809146400 ) ) ; +#1978 = FACE_OUTER_BOUND ( 'NONE', #3350, .T. ) ; +#1979 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890705300, -0.2588190451025124700 ) ) ; +#1980 = ORIENTED_EDGE ( 'NONE', *, *, #3852, .T. ) ; +#1982 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.81382236340609800, -56.23255212013580700 ) ) ; +#1981 = CARTESIAN_POINT ( 'NONE', ( 1.700533333126629500, 11.00353179565119000, -55.80151263207562100 ) ) ; +#1983 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.162264728904461800E-013, 1.000000000000000000 ) ) ; +#1984 = ADVANCED_FACE ( 'NONE', ( #2926 ), #4950, .T. ) ; +#1985 = EDGE_CURVE ( 'NONE', #4930, #4973, #781, .T. ) ; +#1986 = CIRCLE ( 'NONE', #4355, 1.000000000000000700 ) ; +#1987 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ; +#1988 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999999400, -10.00000000000000500, -7.499999999999995600 ) ) ; +#1989 = DIRECTION ( 'NONE', ( -2.233035429520144300E-015, 0.1703400944239008000, -0.9853853318533094500 ) ) ; +#1990 = CARTESIAN_POINT ( 'NONE', ( 17.44919999983619600, 13.93323595257498400, -27.57716682717261500 ) ) ; +#1991 = EDGE_CURVE ( 'NONE', #2942, #1066, #5220, .T. ) ; +#1992 = CYLINDRICAL_SURFACE ( 'NONE', #736, 1.000000000000000900 ) ; +#1993 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.62051269293463700, -55.34690196774870700 ) ) ; +#1994 = CARTESIAN_POINT ( 'NONE', ( 10.85774446679551500, 20.67894344476615500, -60.63071541406949900 ) ) ; +#1995 = FACE_OUTER_BOUND ( 'NONE', #4769, .T. ) ; +#1996 = LINE ( 'NONE', #1937, #5075 ) ; +#1997 = CARTESIAN_POINT ( 'NONE', ( 18.76789389211332800, 0.3242762326340999900, -27.07343153990708400 ) ) ; +#1998 = CARTESIAN_POINT ( 'NONE', ( 2.623570857673424700, 3.845360256145186700, -28.81127175096028000 ) ) ; +#1999 = LINE ( 'NONE', #588, #5081 ) ; +#2001 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#2000 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 0.08428789147962739700, 16.58738359687086800 ) ) ; +#2002 = CARTESIAN_POINT ( 'NONE', ( 18.36947368605644100, 22.19471038043825900, -54.54725646189059800 ) ) ; +#2003 = DIRECTION ( 'NONE', ( -0.7276068751089960200, 1.330667407839369600E-015, -0.6859943405700385000 ) ) ; +#2004 = FACE_OUTER_BOUND ( 'NONE', #4309, .T. ) ; +#2005 = AXIS2_PLACEMENT_3D ( 'NONE', #1631, #4470, #2028 ) ; +#2006 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#2007 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025144100 ) ) ; +#2008 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2009 = CARTESIAN_POINT ( 'NONE', ( 11.29312815965321100, 25.29709385074026400, -59.38346425371580800 ) ) ; +#2010 = ADVANCED_FACE ( 'NONE', ( #4046 ), #3904, .T. ) ; +#2011 = ORIENTED_EDGE ( 'NONE', *, *, #1507, .F. ) ; +#2012 = EDGE_CURVE ( 'NONE', #2708, #29, #5229, .T. ) ; +#2013 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2014 = VERTEX_POINT ( 'NONE', #2389 ) ; +#2015 = CARTESIAN_POINT ( 'NONE', ( 8.368450095567533600, -5.629174335139162500, 17.51968822625229200 ) ) ; +#2016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144100, 0.9659258262890699800 ) ) ; +#2017 = VERTEX_POINT ( 'NONE', #5232 ) ; +#2018 = AXIS2_PLACEMENT_3D ( 'NONE', #1391, #4577, #968 ) ; +#2019 = EDGE_CURVE ( 'NONE', #3223, #687, #639, .T. ) ; +#2020 = ORIENTED_EDGE ( 'NONE', *, *, #1832, .T. ) ; +#2021 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999997600, 12.85037919372189900, -55.79900978460645400 ) ) ; +#2022 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#2023 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -4.999999999999999100, 17.50000000000000000 ) ) ; +#2024 = ORIENTED_EDGE ( 'NONE', *, *, #890, .T. ) ; +#2025 = CARTESIAN_POINT ( 'NONE', ( 14.57775563986177600, 24.17678636881089800, -62.14289124475482900 ) ) ; +#2026 = ORIENTED_EDGE ( 'NONE', *, *, #3397, .T. ) ; +#2027 = VERTEX_POINT ( 'NONE', #2805 ) ; +#2029 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333332600, 2.908428950725592300, -30.80318283654186100 ) ) ; +#2028 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9119034547979171200, -0.4104047869209414000 ) ) ; +#2030 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 7.040692392140484500, 1.886547840629943000 ) ) ; +#2031 = ADVANCED_FACE ( 'NONE', ( #2811 ), #1853, .T. ) ; +#2032 = ORIENTED_EDGE ( 'NONE', *, *, #4582, .T. ) ; +#2033 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #2450 ) ; +#2034 = CARTESIAN_POINT ( 'NONE', ( 18.79490014708876800, 10.00000000000000200, 17.67372790804824600 ) ) ; +#2035 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666667700, 8.464781470452885900, -46.32676742991940000 ) ) ; +#2036 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 5.038302160953093400, 17.19569460786983200 ) ) ; +#2037 = CARTESIAN_POINT ( 'NONE', ( 16.24235852245158900, 8.324226216540175500, 20.38547394235436300 ) ) ; +#2038 = CARTESIAN_POINT ( 'NONE', ( 11.73479170414108300, 11.06822478649858100, -21.05232616951830900 ) ) ; +#2039 = ORIENTED_EDGE ( 'NONE', *, *, #332, .F. ) ; +#2040 = CARTESIAN_POINT ( 'NONE', ( 0.8261132431058516600, 9.746319623092931600, 16.46422904060937500 ) ) ; +#2041 = AXIS2_PLACEMENT_3D ( 'NONE', #3299, #862, #3719 ) ; +#2042 = CIRCLE ( 'NONE', #2781, 0.9999999999999986700 ) ; +#2043 = EDGE_LOOP ( 'NONE', ( #1084, #4807, #2326, #3104 ) ) ; +#2044 = FACE_OUTER_BOUND ( 'NONE', #3400, .T. ) ; +#2045 = ORIENTED_EDGE ( 'NONE', *, *, #3041, .T. ) ; +#2046 = EDGE_CURVE ( 'NONE', #3856, #3254, #2622, .T. ) ; +#2047 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 14.19364074059509100, -23.15088031259205800 ) ) ; +#2048 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766148800, 12.18129507813263500, -62.96121213358091500 ) ) ; +#2049 = EDGE_CURVE ( 'NONE', #3164, #1577, #4846, .T. ) ; +#2050 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#2051 = APPROVAL_ROLE ( '' ) ; +#2052 = FACE_BOUND ( 'NONE', #1604, .T. ) ; +#2053 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#2054 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666300, 21.37922248559116100, -52.73206355963677800 ) ) ; +#2055 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 18.09635858759372700, -66.49999999999997200 ) ) ; +#2056 = EDGE_CURVE ( 'NONE', #3000, #4060, #1729, .T. ) ; +#2057 = CIRCLE ( 'NONE', #31, 5.000000000000000000 ) ; +#2058 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.895162691961615100, 16.90283314778748300 ) ) ; +#2059 = ADVANCED_FACE ( 'NONE', ( #3773 ), #1486, .T. ) ; +#2060 = CARTESIAN_POINT ( 'NONE', ( 3.525730603118166800, 10.00000000000000000, 17.07502773502805100 ) ) ; +#2061 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3138, #2331, #3545 ), + ( #3567, #1127, #3982 ), + ( #1545, #4383, #1941 ), + ( #4776, #2353, #5178 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.005741328797337493300, 0.006770344493608216100 ), + ( 0.4709255423580723800, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.8576105227433830100, 0.8488195431663909700, 1.000000000000000000), + ( 0.8585477634134400800, 0.8498146481094823700, 1.000000000000000000), + ( 0.8583602754316457300, 0.8496155848129201000, 1.000000000000000000), + ( 0.8570547745653895900, 0.8482294836686510300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2062 = AXIS2_PLACEMENT_3D ( 'NONE', #2793, #357, #3211 ) ; +#2063 = CARTESIAN_POINT ( 'NONE', ( 18.59383377394499300, 14.42121451718392300, -24.44710658399765900 ) ) ; +#2064 = CARTESIAN_POINT ( 'NONE', ( 0.6965640897227397500, 0.6899051093077339700, 17.63774587505587400 ) ) ; +#2065 = CIRCLE ( 'NONE', #24, 100.4290542974443200 ) ; +#2066 = CARTESIAN_POINT ( 'NONE', ( 12.31130819857715500, 14.39441902002237900, -66.25652403492503600 ) ) ; +#2067 = CARTESIAN_POINT ( 'NONE', ( 13.87814632771596700, 11.53763223816051900, -62.01864571222526500 ) ) ; +#2068 = ORIENTED_EDGE ( 'NONE', *, *, #2137, .F. ) ; +#2069 = AXIS2_PLACEMENT_3D ( 'NONE', #1871, #4704, #2285 ) ; +#2070 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -8.074441630149902200, -13.39944000404294900 ) ) ; +#2071 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -4.999999999999999100, 12.50000000000000000 ) ) ; +#2072 = EDGE_LOOP ( 'NONE', ( #1596, #1530, #5246, #1686 ) ) ; +#2073 = ORIENTED_EDGE ( 'NONE', *, *, #2169, .T. ) ; +#2074 = EDGE_CURVE ( 'NONE', #3018, #480, #3658, .T. ) ; +#2075 = ORIENTED_EDGE ( 'NONE', *, *, #1360, .T. ) ; +#2076 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.77489008581955700, -26.94531476495733800 ) ) ; +#2077 = ORIENTED_EDGE ( 'NONE', *, *, #4556, .T. ) ; +#2078 = PLANE ( 'NONE', #3800 ) ; +#2079 = ADVANCED_FACE ( 'NONE', ( #2554 ), #1619, .T. ) ; +#2080 = AXIS2_PLACEMENT_3D ( 'NONE', #3430, #2620, #176 ) ; +#2081 = EDGE_CURVE ( 'NONE', #441, #873, #392, .T. ) ; +#2082 = CARTESIAN_POINT ( 'NONE', ( 7.606430090101332200, 14.40230516773829500, -66.26242804692560600 ) ) ; +#2083 = ORIENTED_EDGE ( 'NONE', *, *, #1733, .F. ) ; +#2084 = CARTESIAN_POINT ( 'NONE', ( 13.76015305824731500, 13.67851662341588600, -65.62188976154203600 ) ) ; +#2085 = ORIENTED_EDGE ( 'NONE', *, *, #2074, .F. ) ; +#2086 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Hammer_Slide', ( #973, #3339 ), #338 ) ; +#2087 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 19.65546469306328300, -53.19394306809146400 ) ) ; +#2088 = CARTESIAN_POINT ( 'NONE', ( 13.87909001115147800, -0.6730509806664779500, -25.13571135188675500 ) ) ; +#2089 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025143000, 0.9659258262890700900 ) ) ; +#2090 = AXIS2_PLACEMENT_3D ( 'NONE', #5001, #990, #3845 ) ; +#2091 = ORIENTED_EDGE ( 'NONE', *, *, #2313, .T. ) ; +#2092 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1838, #4276, #2250, #5070 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884035500E-019, 0.0007744659881017164500 ), + .UNSPECIFIED. ) ; +#2093 = VECTOR ( 'NONE', #917, 1000.000000000000000 ) ; +#2094 = VERTEX_POINT ( 'NONE', #3883 ) ; +#2095 = VERTEX_POINT ( 'NONE', #3464 ) ; +#2096 = DIRECTION ( 'NONE', ( 4.489794735692284300E-016, 0.2588190451025126900, -0.9659258262890705300 ) ) ; +#2097 = VECTOR ( 'NONE', #2383, 1000.000000000000000 ) ; +#2098 = AXIS2_PLACEMENT_3D ( 'NONE', #3648, #1206, #1620 ) ; +#2099 = VERTEX_POINT ( 'NONE', #4675 ) ; +#2100 = CARTESIAN_POINT ( 'NONE', ( 11.08742050427962600, 15.44179145063312900, -62.00119535839928600 ) ) ; +#2101 = LINE ( 'NONE', #499, #4142 ) ; +#2102 = CARTESIAN_POINT ( 'NONE', ( 12.17077396574943600, 11.09867278487480600, -21.18000361856713800 ) ) ; +#2103 = CARTESIAN_POINT ( 'NONE', ( 19.42024535271705700, 2.842488067032563400, 17.88604056664485900 ) ) ; +#2104 = VERTEX_POINT ( 'NONE', #1028 ) ; +#2105 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2106 = ADVANCED_FACE ( 'NONE', ( #1347 ), #2256, .F. ) ; +#2107 = EDGE_CURVE ( 'NONE', #2512, #4881, #3195, .T. ) ; +#2108 = CYLINDRICAL_SURFACE ( 'NONE', #4630, 100.0000000000000000 ) ; +#2109 = VECTOR ( 'NONE', #3119, 1000.000000000000000 ) ; +#2110 = EDGE_CURVE ( 'NONE', #3164, #836, #2447, .T. ) ; +#2111 = VECTOR ( 'NONE', #4727, 1000.000000000000000 ) ; +#2112 = VERTEX_POINT ( 'NONE', #2274 ) ; +#2113 = CARTESIAN_POINT ( 'NONE', ( 1.796654844533129900E-013, 23.06031261319321100, -54.15588395426945600 ) ) ; +#2114 = EDGE_CURVE ( 'NONE', #1580, #864, #908, .T. ) ; +#2115 = CARTESIAN_POINT ( 'NONE', ( 9.890676078315209500, 9.925206530040744800, -63.56571585367565500 ) ) ; +#2116 = CIRCLE ( 'NONE', #2370, 5.732233047033670200 ) ; +#2117 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1113, #3551, #4366, #1928, #4760, #2337, #5164, #2737, #300, #3143, #715, #3572, #1134, #3988 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 4.336808689942017700E-018, 0.0009729981833468569900, 0.001459497275020283400, 0.001945996366693709700, 0.002918994550040557200, 0.003405493641713980900, 0.003891992733387404600 ), + .UNSPECIFIED. ) ; +#2118 = CARTESIAN_POINT ( 'NONE', ( 16.10818007615294100, 13.30600488225625700, -19.83817819065139400 ) ) ; +#2119 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -4.999999999999998200, 7.499999999999998200 ) ) ; +#2120 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2121 = CIRCLE ( 'NONE', #1840, 1.000000000000000200 ) ; +#2122 = ORIENTED_EDGE ( 'NONE', *, *, #4435, .F. ) ; +#2123 = AXIS2_PLACEMENT_3D ( 'NONE', #1199, #4055, #1611 ) ; +#2124 = ADVANCED_FACE ( 'NONE', ( #4705 ), #3378, .F. ) ; +#2125 = ORIENTED_EDGE ( 'NONE', *, *, #1264, .F. ) ; +#2126 = ORIENTED_EDGE ( 'NONE', *, *, #1469, .F. ) ; +#2127 = CARTESIAN_POINT ( 'NONE', ( 7.840670565502713400, 14.49429361503040800, -66.33003234857857000 ) ) ; +#2128 = AXIS2_PLACEMENT_3D ( 'NONE', #3500, #1063, #3916 ) ; +#2129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2130 = ORIENTED_EDGE ( 'NONE', *, *, #1985, .F. ) ; +#2131 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.184850993605144000E-016, 12.49999999999999600 ) ) ; +#2132 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338496400, 24.01142209705481200, -59.79133915250319100 ) ) ; +#2133 = VERTEX_POINT ( 'NONE', #2689 ) ; +#2134 = VERTEX_POINT ( 'NONE', #3941 ) ; +#2135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #291, #1898, #704, #3563, #1122, #3977, #1539, #4377 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.084202172485504400E-019, 0.001863186135623650500, 0.002794779203435471900, 0.003726372271247292800 ), + .UNSPECIFIED. ) ; +#2136 = VERTEX_POINT ( 'NONE', #3093 ) ; +#2137 = EDGE_CURVE ( 'NONE', #1517, #3218, #4474, .T. ) ; +#2138 = EDGE_LOOP ( 'NONE', ( #308, #5111, #4656 ) ) ; +#2139 = APPROVAL ( #3277, 'UNSPECIFIED' ) ; +#2140 = EDGE_CURVE ( 'NONE', #1378, #2323, #1642, .T. ) ; +#2141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2142 = CARTESIAN_POINT ( 'NONE', ( 6.884165767688140900, 14.79944115611840900, -61.58554552874154800 ) ) ; +#2143 = CARTESIAN_POINT ( 'NONE', ( 8.131991932141382100, 15.27267552189283400, -61.91601207634266800 ) ) ; +#2144 = ORIENTED_EDGE ( 'NONE', *, *, #3304, .T. ) ; +#2145 = VERTEX_POINT ( 'NONE', #4750 ) ; +#2146 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753876100, 14.11082393428809700, -60.50305359653262400 ) ) ; +#2147 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333800, 11.07935950138769600, -56.35951613027766900 ) ) ; +#2148 = DIRECTION ( 'NONE', ( -5.116948535065003800E-016, -0.5899440004042950700, 0.8074441630149897800 ) ) ; +#2149 = CARTESIAN_POINT ( 'NONE', ( 10.11322461325451800, 23.47154057233361600, -64.31011593326005000 ) ) ; +#2150 = ADVANCED_FACE ( 'NONE', ( #252 ), #113, .T. ) ; +#2151 = LINE ( 'NONE', #3379, #5266 ) ; +#2152 = EDGE_LOOP ( 'NONE', ( #865, #558, #930, #4920 ) ) ; +#2153 = ORIENTED_EDGE ( 'NONE', *, *, #4101, .F. ) ; +#2154 = CIRCLE ( 'NONE', #2228, 5.000000000000000000 ) ; +#2155 = ORIENTED_EDGE ( 'NONE', *, *, #3923, .T. ) ; +#2156 = AXIS2_PLACEMENT_3D ( 'NONE', #3222, #1222, #4070 ) ; +#2157 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666670100, 2.612651188657570100, -30.32807655698928100 ) ) ; +#2158 = CARTESIAN_POINT ( 'NONE', ( 5.495654605235009700, 11.59922884276325100, -61.63915613429952600 ) ) ; +#2159 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824611500, 14.11082393428810100, -60.50305359653262400 ) ) ; +#2160 = LOCAL_TIME ( 15, 6, 45.00000000000000000, #3261 ) ; +#2161 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, 4.650775477637226100, -30.32756122834777600 ) ) ; +#2162 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#2163 = CIRCLE ( 'NONE', #1494, 4.999999999999997300 ) ; +#2164 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, 4.999999999999990200, -22.46941544652791100 ) ) ; +#2165 = CARTESIAN_POINT ( 'NONE', ( 14.28941635278174600, 24.13775104097513200, -62.40548395472664100 ) ) ; +#2166 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -4.999999999999999100, 16.50000000000000000 ) ) ; +#2167 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 3.469446951953616200E-016 ) ) ; +#2168 = EDGE_LOOP ( 'NONE', ( #2428, #4858, #5032, #2355 ) ) ; +#2169 = EDGE_CURVE ( 'NONE', #2700, #3856, #4982, .T. ) ; +#2170 = CIRCLE ( 'NONE', #4233, 1.000000000000000000 ) ; +#2171 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2172 = AXIS2_PLACEMENT_3D ( 'NONE', #1337, #2141, #4964 ) ; +#2173 = EDGE_CURVE ( 'NONE', #3707, #348, #1233, .T. ) ; +#2174 = CIRCLE ( 'NONE', #4984, 101.4290542974443200 ) ; +#2175 = ADVANCED_FACE ( 'NONE', ( #4579 ), #2302, .T. ) ; +#2176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#2177 = CARTESIAN_POINT ( 'NONE', ( 18.38355982220633000, 14.45482002894914700, -25.57804227206699100 ) ) ; +#2178 = LINE ( 'NONE', #3838, #9 ) ; +#2179 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2180 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 1.133276031636666800, -29.95686141913306200 ) ) ; +#2181 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000700, 0.4654998936849557600, -27.35715002713493900 ) ) ; +#2182 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -9.999999999999998200, 12.50000000000000200 ) ) ; +#2183 = CARTESIAN_POINT ( 'NONE', ( 2.462316166534747700, 13.87245001508156500, -27.33059968327148700 ) ) ; +#2184 = ORIENTED_EDGE ( 'NONE', *, *, #820, .F. ) ; +#2185 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666665900, 21.66487829819825400, -53.52313491720792600 ) ) ; +#2186 = CARTESIAN_POINT ( 'NONE', ( 16.53878657002519900, -0.9608482116555459000, -24.63338054487093800 ) ) ; +#2187 = ORIENTED_EDGE ( 'NONE', *, *, #2495, .T. ) ; +#2188 = EDGE_LOOP ( 'NONE', ( #5192, #4320, #2948 ) ) ; +#2189 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -7.266997467134911100, -12.80949600363865300 ) ) ; +#2190 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 20.00000000000000400 ) ) ; +#2191 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.62051269293463700, -55.34690196774870000 ) ) ; +#2192 = EDGE_LOOP ( 'NONE', ( #3958, #1320, #3003, #1670 ) ) ; +#2193 = VERTEX_POINT ( 'NONE', #4002 ) ; +#2194 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9119034547979164600, 0.4104047869209426800 ) ) ; +#2195 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 14.50935294783794800, -26.81835075481546600 ) ) ; +#2196 = DIRECTION ( 'NONE', ( -0.6484729204542034600, 0.0000000000000000000, -0.7612377233411360400 ) ) ; +#2197 = ORIENTED_EDGE ( 'NONE', *, *, #496, .F. ) ; +#2198 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.949419908020084700, -29.44356370497958500 ) ) ; +#2199 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2200 = ADVANCED_FACE ( 'NONE', ( #3263 ), #3110, .T. ) ; +#2201 = ORIENTED_EDGE ( 'NONE', *, *, #4682, .T. ) ; +#2202 = EDGE_CURVE ( 'NONE', #4651, #687, #1098, .T. ) ; +#2203 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.162264728904461800E-013 ) ) ; +#2204 = EDGE_CURVE ( 'NONE', #4299, #3006, #2163, .T. ) ; +#2205 = ORIENTED_EDGE ( 'NONE', *, *, #2352, .F. ) ; +#2206 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2207 = CIRCLE ( 'NONE', #1650, 1.000000000000000900 ) ; +#2208 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.62051269293463700, -55.34690196774870700 ) ) ; +#2209 = AXIS2_PLACEMENT_3D ( 'NONE', #3888, #1453, #4286 ) ; +#2210 = VERTEX_POINT ( 'NONE', #1982 ) ; +#2211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2212 = VERTEX_POINT ( 'NONE', #2391 ) ; +#2213 = TOROIDAL_SURFACE ( 'NONE', #3235, 5.123724356957928300, 1.000000000000000000 ) ; +#2214 = ORIENTED_EDGE ( 'NONE', *, *, #1335, .F. ) ; +#2215 = DIRECTION ( 'NONE', ( -0.1006687319876458200, 0.2575042443533914200, -0.9610189230915219300 ) ) ; +#2216 = CARTESIAN_POINT ( 'NONE', ( 9.722853250717733400, 11.02205614447069100, -20.85581036584266800 ) ) ; +#2217 = CARTESIAN_POINT ( 'NONE', ( 0.2245054604270651200, 10.00000000000000000, 17.45504577057665700 ) ) ; +#2218 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.457153238772571200, 17.50000000000000000 ) ) ; +#2219 = FACE_OUTER_BOUND ( 'NONE', #3137, .T. ) ; +#2220 = AXIS2_PLACEMENT_3D ( 'NONE', #3761, #1316, #4159 ) ; +#2221 = CARTESIAN_POINT ( 'NONE', ( 1.635308817895066500, 21.43888472202808900, -52.71607711156487100 ) ) ; +#2222 = VERTEX_POINT ( 'NONE', #3586 ) ; +#2223 = CARTESIAN_POINT ( 'NONE', ( 13.42410363091946500, 21.12994933929979200, -59.69538059135142300 ) ) ; +#2224 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 11.07935950138770100, -56.35951613027766900 ) ) ; +#2225 = CIRCLE ( 'NONE', #3574, 9.267766952966360000 ) ; +#2226 = ADVANCED_FACE ( 'NONE', ( #3115, #2052, #954 ), #768, .T. ) ; +#2227 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 8.881784197001252300E-016, 1.000000000000000000 ) ) ; +#2228 = AXIS2_PLACEMENT_3D ( 'NONE', #2071, #4898, #2485 ) ; +#2229 = LINE ( 'NONE', #4306, #53 ) ; +#2230 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.67319579279195600, -27.13576078017012300 ) ) ; +#2231 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999965600, 11.39507170863056900, -60.02698657250110900 ) ) ; +#2232 = LINE ( 'NONE', #190, #3446 ) ; +#2233 = ORIENTED_EDGE ( 'NONE', *, *, #2525, .F. ) ; +#2234 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#2235 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999255900, 0.4654998936782570600, -27.35715002712167600 ) ) ; +#2236 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 21.76776695296636200 ) ) ; +#2237 = DIRECTION ( 'NONE', ( -1.734723475976806800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2238 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 16.50000000000000000 ) ) ; +#2239 = TOROIDAL_SURFACE ( 'NONE', #2090, 11.03553390593274000, 2.500000000000000000 ) ; +#2240 = EDGE_CURVE ( 'NONE', #2136, #4030, #5289, .T. ) ; +#2241 = DIRECTION ( 'NONE', ( -1.301042606982605300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2242 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.370875771963131000, 16.95638256154236200 ) ) ; +#2243 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#2244 = CARTESIAN_POINT ( 'NONE', ( 6.476413068362992600, 21.12970091331160200, -59.69667089379716900 ) ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( 18.25379114671223800, 11.10764383937117800, -56.63895756179253700 ) ) ; +#2246 = VECTOR ( 'NONE', #1496, 1000.000000000000000 ) ; +#2247 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -1.457153238772571200, 16.50000000000000000 ) ) ; +#2248 = EDGE_CURVE ( 'NONE', #4060, #2906, #449, .T. ) ; +#2249 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1095, #3531, #2319, #5147 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.003577680289322315900 ), + .UNSPECIFIED. ) ; +#2250 = CARTESIAN_POINT ( 'NONE', ( 17.43646274237535100, 4.413519308181141900, -29.86898943321114100 ) ) ; +#2251 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999400, 12.85037919372189700, -55.79900978460642600 ) ) ; +#2252 = VERTEX_POINT ( 'NONE', #3642 ) ; +#2253 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, -18.31287684118413500, -36.48065332244486600 ) ) ; +#2254 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.11951779862973000, -58.59880724112522200 ) ) ; +#2256 = PLANE ( 'NONE', #4570 ) ; +#2255 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.661242075246047700, -28.91806644427228800 ) ) ; +#2257 = VERTEX_POINT ( 'NONE', #3661 ) ; +#2258 = CARTESIAN_POINT ( 'NONE', ( 18.25557629731357400, 21.58966866263664000, -53.25662396817733000 ) ) ; +#2259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890699800 ) ) ; +#2260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.312964634635743900E-016, 1.000000000000000000 ) ) ; +#2261 = ORIENTED_EDGE ( 'NONE', *, *, #942, .F. ) ; +#2262 = CARTESIAN_POINT ( 'NONE', ( 14.81097262191304200, 8.538211617890434400, 21.49554388744184100 ) ) ; +#2263 = CARTESIAN_POINT ( 'NONE', ( 0.4199284455453406500, 6.260203345783795100, 17.96870753161743700 ) ) ; +#2264 = ORIENTED_EDGE ( 'NONE', *, *, #3623, .F. ) ; +#2265 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 18.09635858759372700, -66.49999999999997200 ) ) ; +#2266 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000094000, 10.76080001388549200, -58.73476491903293400 ) ) ; +#2267 = ORIENTED_EDGE ( 'NONE', *, *, #2825, .F. ) ; +#2268 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666666100, 2.612651188657561200, -30.32807655698928100 ) ) ; +#2269 = ORIENTED_EDGE ( 'NONE', *, *, #2972, .F. ) ; +#2270 = ORIENTED_EDGE ( 'NONE', *, *, #265, .F. ) ; +#2271 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -1.505759517047136500, -23.64527242200718100 ) ) ; +#2272 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666667900, 11.07935950138772100, -56.35951613027771900 ) ) ; +#2274 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666665900, 3.023894846702055000, -31.05974356099691700 ) ) ; +#2273 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025145800 ) ) ; +#2275 = ORIENTED_EDGE ( 'NONE', *, *, #4914, .F. ) ; +#2276 = EDGE_CURVE ( 'NONE', #4030, #2668, #2506, .T. ) ; +#2277 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.358343471931528800, -26.90678312694817000 ) ) ; +#2278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#2279 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 12.36099753491963100, -59.76816752739856800 ) ) ; +#2280 = CARTESIAN_POINT ( 'NONE', ( 17.00233268915289700, 10.00000000000078500, 19.05586879047284300 ) ) ; +#2281 = ORIENTED_EDGE ( 'NONE', *, *, #1019, .T. ) ; +#2282 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 22.33082910963321100, -53.51928073660164400 ) ) ; +#2283 = ORIENTED_EDGE ( 'NONE', *, *, #1706, .T. ) ; +#2284 = AXIS2_PLACEMENT_3D ( 'NONE', #3467, #1029, #3885 ) ; +#2285 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2286 = EDGE_CURVE ( 'NONE', #3338, #3942, #4100, .T. ) ; +#2287 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666300, 21.37922248559116100, -52.73206355963677800 ) ) ; +#2288 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2289 = VECTOR ( 'NONE', #492, 1000.000000000000000 ) ; +#2290 = ORIENTED_EDGE ( 'NONE', *, *, #786, .T. ) ; +#2291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025146300, 0.9659258262890698700 ) ) ; +#2292 = CIRCLE ( 'NONE', #582, 10.00000000000000500 ) ; +#2293 = ORIENTED_EDGE ( 'NONE', *, *, #1626, .F. ) ; +#2294 = CARTESIAN_POINT ( 'NONE', ( 0.5501013956156052300, 8.151247669657186300, 17.76647911033208900 ) ) ; +#2295 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.88990026198009500, -27.53874722640263800 ) ) ; +#2296 = DIRECTION ( 'NONE', ( 0.7761064337087477700, -0.6306019374818706600, 0.0000000000000000000 ) ) ; +#2297 = CIRCLE ( 'NONE', #3742, 4.999999999999997300 ) ; +#2298 = DIRECTION ( 'NONE', ( 1.325001034533938900E-016, -1.625531029949085900E-016, -1.000000000000000000 ) ) ; +#2299 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#2300 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#2301 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 10.00000000000000000, -7.500000000000000900 ) ) ; +#2302 = TOROIDAL_SURFACE ( 'NONE', #929, 102.4994838187113800, 2.500000000000000000 ) ; +#2303 = PLANE ( 'NONE', #474 ) ; +#2304 = CARTESIAN_POINT ( 'NONE', ( 9.343823012049137200, 12.80805322534705200, -17.86613753412857600 ) ) ; +#2305 = VECTOR ( 'NONE', #5201, 1000.000000000000000 ) ; +#2306 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2307 = TOROIDAL_SURFACE ( 'NONE', #533, 3.964466094067294700, 2.500000000000000000 ) ; +#2309 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 22.07027925878595900, -52.54689545533517500 ) ) ; +#2308 = CARTESIAN_POINT ( 'NONE', ( 2.487300000000000300, 4.292876200220367100, -29.64181049816156800 ) ) ; +#2310 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4048, #1191, #2420, #5244, #2814, #379, #3229, #795 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0009383413212659620600, 0.001876682642531924100, 0.003753365285063868200 ), + .UNSPECIFIED. ) ; +#2311 = CARTESIAN_POINT ( 'NONE', ( 17.02026781186545500, 10.00000000000000400, 16.46446609406728000 ) ) ; +#2312 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999997600, 12.85037919372189900, -55.79900978460645400 ) ) ; +#2313 = EDGE_CURVE ( 'NONE', #2134, #4296, #2977, .T. ) ; +#2314 = ORIENTED_EDGE ( 'NONE', *, *, #1328, .F. ) ; +#2315 = CARTESIAN_POINT ( 'NONE', ( 5.045481696989364600, 13.10602445555254300, -19.06489883925963400 ) ) ; +#2316 = EDGE_CURVE ( 'NONE', #1811, #3233, #3518, .T. ) ; +#2317 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -1.457153238772571200, 17.50000000000000000 ) ) ; +#2318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890698700 ) ) ; +#2319 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.01701308172521900, -57.40797211786181700 ) ) ; +#2320 = CARTESIAN_POINT ( 'NONE', ( 5.495205200902373300, 23.85418733900967000, -58.35503958355476300 ) ) ; +#2321 = CARTESIAN_POINT ( 'NONE', ( 2.878132188134543400, 10.00000000000000400, 16.46446609406728400 ) ) ; +#2322 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #876, #460, #1294, #4137, #1699, #4538, #2103, #4925, #2516, #55 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001630916741351797300, 0.003261833482703594600, 0.004892750224055391800, 0.006523666965407187400 ), + .UNSPECIFIED. ) ; +#2323 = VERTEX_POINT ( 'NONE', #4198 ) ; +#2324 = EDGE_CURVE ( 'NONE', #2473, #5060, #843, .T. ) ; +#2325 = CARTESIAN_POINT ( 'NONE', ( 19.11873645546304300, 9.599745061737538200, 16.71953379312956400 ) ) ; +#2326 = ORIENTED_EDGE ( 'NONE', *, *, #17, .T. ) ; +#2327 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -11.59115779176004500, -61.56645032909980800 ) ) ; +#2328 = ORIENTED_EDGE ( 'NONE', *, *, #4435, .T. ) ; +#2330 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2329 = CARTESIAN_POINT ( 'NONE', ( 1.130506107884755100, 0.3242762326347067800, -27.07343153990824500 ) ) ; +#2331 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 3.656246553858021600, -30.77515184652430600 ) ) ; +#2332 = ORIENTED_EDGE ( 'NONE', *, *, #2432, .F. ) ; +#2333 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#2334 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .T. ) ; +#2335 = CARTESIAN_POINT ( 'NONE', ( 7.707220985640900000, 13.46626428591494200, -20.54099676404984400 ) ) ; +#2336 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.513723080109523200, 17.10654937114235400 ) ) ; +#2337 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, -0.4150812417257782000, -24.84128094142860400 ) ) ; +#2338 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2339 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2340 = ORIENTED_EDGE ( 'NONE', *, *, #2462, .F. ) ; +#2341 = CARTESIAN_POINT ( 'NONE', ( 1.478313075306869400, 14.45341039551088600, -25.36653771736827400 ) ) ; +#2342 = CARTESIAN_POINT ( 'NONE', ( 8.287069889485412200, -5.621177116216768100, 17.51915808026067700 ) ) ; +#2343 = ORIENTED_EDGE ( 'NONE', *, *, #2363, .T. ) ; +#2344 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #671, #238, #3529 ), + ( #1091, #3943, #1508 ), + ( #4348, #1905, #4734 ), + ( #2315, #5143, #2712 ), + ( #278, #3122, #690 ), + ( #3549, #1111, #3964 ), + ( #1528, #4364, #1926 ), + ( #4757, #2335, #5162 ), + ( #2734, #296, #3141 ), + ( #712, #3570, #1131 ), + ( #3986, #1549, #4385 ), + ( #1944, #4781, #2357 ), + ( #5181, #2752, #318 ), + ( #3162, #732, #3591 ), + ( #1153, #4007, #5018 ), + ( #459, #3315, #875 ), + ( #3732, #1293, #4136 ), + ( #1698, #4537, #2102 ), + ( #4924, #2515, #54 ), + ( #2907, #476, #3329 ), + ( #896, #3748, #1304 ), + ( #4151, #1717, #4548 ), + ( #2118, #4942, #2530 ), + ( #67, #2925, #490 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001797250122471860400, 0.002695875183707790700, 0.003594500244943720700, 0.005391750367415581300, 0.006290375428651510900, 0.007189000489887441500, 0.008986250612359301600, 0.009884875673595233000, 0.01078350073483116300, 0.01258075085730302200, 0.01437800097977488300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7081472959999389700, 1.000000000000000000), + ( 1.000000000000000000, 0.7092259342584597000, 1.000000000000000000), + ( 1.000000000000000000, 0.7107597525646045500, 1.000000000000000000), + ( 1.000000000000000000, 0.7112571799240141600, 1.000000000000000000), + ( 1.000000000000000000, 0.7122030186737922100, 1.000000000000000000), + ( 1.000000000000000000, 0.7126534163093420900, 1.000000000000000000), + ( 1.000000000000000000, 0.7138843621715664800, 1.000000000000000000), + ( 1.000000000000000000, 0.7145412435119515800, 1.000000000000000000), + ( 1.000000000000000000, 0.7152139760617498600, 1.000000000000000000), + ( 1.000000000000000000, 0.7153863664220258000, 1.000000000000000000), + ( 1.000000000000000000, 0.7156185823422537300, 1.000000000000000000), + ( 1.000000000000000000, 0.7156779038487106600, 1.000000000000000000), + ( 1.000000000000000000, 0.7156784472951488500, 1.000000000000000000), + ( 1.000000000000000000, 0.7154451459345965200, 1.000000000000000000), + ( 1.000000000000000000, 0.7147760168880368200, 1.000000000000000000), + ( 1.000000000000000000, 0.7144999465415884400, 1.000000000000000000), + ( 1.000000000000000000, 0.7138494664072392300, 1.000000000000000000), + ( 1.000000000000000000, 0.7134761448631888900, 1.000000000000000000), + ( 1.000000000000000000, 0.7122531880105846800, 1.000000000000000000), + ( 1.000000000000000000, 0.7112941503046305000, 1.000000000000000000), + ( 1.000000000000000000, 0.7092436217104894900, 1.000000000000000000), + ( 1.000000000000000000, 0.7081463333853999000, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865473500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2345 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.077161772820236500, 17.49781021144864100 ) ) ; +#2346 = ORIENTED_EDGE ( 'NONE', *, *, #1710, .F. ) ; +#2347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2349 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333332700, 2.612651188657587800, -30.32807655698930200 ) ) ; +#2348 = CARTESIAN_POINT ( 'NONE', ( 5.231040115028100100, 1.606187905580924100, -25.07649214136548500 ) ) ; +#2350 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 7.709269841782330900, 16.93242356500261900 ) ) ; +#2351 = CIRCLE ( 'NONE', #5275, 10.00000000000000200 ) ; +#2352 = EDGE_CURVE ( 'NONE', #2095, #4930, #5148, .T. ) ; +#2353 = CARTESIAN_POINT ( 'NONE', ( 17.42973975664971000, 3.299922318592764200, -30.09858895951094800 ) ) ; +#2354 = ORIENTED_EDGE ( 'NONE', *, *, #3722, .T. ) ; +#2355 = ORIENTED_EDGE ( 'NONE', *, *, #4974, .T. ) ; +#2356 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2357 = CARTESIAN_POINT ( 'NONE', ( 9.493324552686679900, 11.02442836639240300, -20.86598677573203300 ) ) ; +#2358 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000600, 6.234566519323999000, 17.67027947139619200 ) ) ; +#2359 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 8.391663890638797700, 16.63498794369949600 ) ) ; +#2360 = FACE_OUTER_BOUND ( 'NONE', #3736, .T. ) ; +#2361 = AXIS2_PLACEMENT_3D ( 'NONE', #3039, #608, #3469 ) ; +#2362 = CARTESIAN_POINT ( 'NONE', ( 2.878132188134541600, 10.00000000000000200, 16.46446609406728400 ) ) ; +#2363 = EDGE_CURVE ( 'NONE', #883, #3255, #4025, .T. ) ; +#2364 = ORIENTED_EDGE ( 'NONE', *, *, #1205, .T. ) ; +#2365 = CARTESIAN_POINT ( 'NONE', ( 13.83837507874212300, -9.999999999999998200, 12.50000000327236200 ) ) ; +#2366 = CARTESIAN_POINT ( 'NONE', ( 8.148156994350513200, 20.81459703583251300, -60.42425468202890200 ) ) ; +#2367 = CIRCLE ( 'NONE', #2455, 9.999999999999998200 ) ; +#2368 = ORIENTED_EDGE ( 'NONE', *, *, #2110, .F. ) ; +#2369 = CARTESIAN_POINT ( 'NONE', ( 18.61976789149376200, 11.18328093123989600, -58.82367498576953600 ) ) ; +#2370 = AXIS2_PLACEMENT_3D ( 'NONE', #2236, #5059, #2637 ) ; +#2371 = CIRCLE ( 'NONE', #841, 9.999999999999998200 ) ; +#2372 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.410334924664620200, -30.21987352631621700 ) ) ; +#2373 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#2374 = CIRCLE ( 'NONE', #48, 3.964466094067293800 ) ; +#2375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2376 = FACE_OUTER_BOUND ( 'NONE', #1076, .T. ) ; +#2377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890723100, -0.2588190451025057500 ) ) ; +#2378 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #3055, #625 ) ; +#2379 = CARTESIAN_POINT ( 'NONE', ( 4.701984784046093300, 8.474074797422201000, 21.21153767766026400 ) ) ; +#2380 = CARTESIAN_POINT ( 'NONE', ( 3.655938506533706000, 8.324213334309099800, 20.38538852042175600 ) ) ; +#2381 = CARTESIAN_POINT ( 'NONE', ( 18.19786666687077000, 21.45154526856290600, -53.00197585945800000 ) ) ; +#2382 = VECTOR ( 'NONE', #2967, 1000.000000000000000 ) ; +#2383 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 2.312964634635743900E-016, 1.000000000000000000 ) ) ; +#2384 = CARTESIAN_POINT ( 'NONE', ( 9.831792459461128800, 26.22243881804170600, -59.20488593715703700 ) ) ; +#2385 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025146300, 0.9659258262890698700 ) ) ; +#2386 = FACE_OUTER_BOUND ( 'NONE', #4333, .T. ) ; +#2387 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1148, #1561, #5195, #2767, #333, #3264, #826, #3677, #1241, #4092 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0009360462212823668400, 0.001872092442564733700, 0.002808138663847100500, 0.003744184885129467300 ), + .UNSPECIFIED. ) ; +#2388 = EDGE_CURVE ( 'NONE', #804, #1580, #5002, .T. ) ; +#2389 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, -8.074441630149920000, -13.39944000404295300 ) ) ; +#2391 = CARTESIAN_POINT ( 'NONE', ( 15.68143304703367000, 5.000000000000000900, 21.76776695296636200 ) ) ; +#2390 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.69881218707944000, -55.63911965875605100 ) ) ; +#2392 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -4.374999999999900500, -1.172277716886104300 ) ) ; +#2393 = ORIENTED_EDGE ( 'NONE', *, *, #560, .T. ) ; +#2394 = DIRECTION ( 'NONE', ( -0.7499999999999977800, 0.1711927069771168900, -0.6388998803238661300 ) ) ; +#2395 = EDGE_CURVE ( 'NONE', #4740, #4495, #1780, .T. ) ; +#2396 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #157, #5021, #958, #3001, #572, #3431, #993, #3847, #1414, #4246, #1809, #4638, #2216, #5039 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001348209685350291400, 0.002022314528025437100, 0.002696419370700583300, 0.004044629056050872400, 0.004718733898726019100, 0.005392838741401166600 ), + .UNSPECIFIED. ) ; +#2397 = EDGE_CURVE ( 'NONE', #4243, #4296, #3850, .T. ) ; +#2398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2399 = ORIENTED_EDGE ( 'NONE', *, *, #2972, .T. ) ; +#2400 = CARTESIAN_POINT ( 'NONE', ( 18.26309118210493000, 14.71716567260400200, -27.63028010490992200 ) ) ; +#2401 = ORIENTED_EDGE ( 'NONE', *, *, #186, .T. ) ; +#2402 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.76230194526953300, -55.93451621441195000 ) ) ; +#2403 = CARTESIAN_POINT ( 'NONE', ( 11.16059262238139200, 23.54656547901294400, -64.16899652104426400 ) ) ; +#2404 = ORIENTED_EDGE ( 'NONE', *, *, #4714, .F. ) ; +#2405 = ORIENTED_EDGE ( 'NONE', *, *, #627, .F. ) ; +#2406 = CARTESIAN_POINT ( 'NONE', ( 16.56322041892102700, 2.862184343475483200, -27.09485569630483300 ) ) ; +#2407 = CARTESIAN_POINT ( 'NONE', ( 2.487300000000001200, 4.292876200220353800, -29.64181049816156500 ) ) ; +#2408 = ORIENTED_EDGE ( 'NONE', *, *, #3522, .T. ) ; +#2410 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2409 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.370875771991743700, 16.95638255745944200 ) ) ; +#2411 = EDGE_LOOP ( 'NONE', ( #2471, #59, #2535, #3293, #2722 ) ) ; +#2412 = CARTESIAN_POINT ( 'NONE', ( 20.98473390593273500, 5.000000000000000000, 20.00000000000000000 ) ) ; +#2413 = ADVANCED_FACE ( 'NONE', ( #2740 ), #3970, .T. ) ; +#2414 = AXIS2_PLACEMENT_3D ( 'NONE', #4790, #2762, #4809 ) ; +#2415 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999945500, 23.07123924717525300, -54.47592128611000800 ) ) ; +#2416 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338501700, 12.18129507813263500, -62.96121213358091500 ) ) ; +#2417 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.22771491430602400, -23.40969935769457100 ) ) ; +#2418 = ORIENTED_EDGE ( 'NONE', *, *, #3433, .F. ) ; +#2419 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999800, 4.999999999999995600, 1.004216362529351200E-015 ) ) ; +#2420 = CARTESIAN_POINT ( 'NONE', ( 1.605383978337420000, 11.12072997292247900, -56.98091806902424100 ) ) ; +#2421 = CARTESIAN_POINT ( 'NONE', ( 1.211465521467868900, 8.089255650988798500, 18.23223304703364200 ) ) ; +#2422 = CARTESIAN_POINT ( 'NONE', ( 12.39068771242942200, 20.93797163819021600, -60.19557434272086000 ) ) ; +#2423 = AXIS2_PLACEMENT_3D ( 'NONE', #1439, #4294, #4274 ) ; +#2424 = ORIENTED_EDGE ( 'NONE', *, *, #557, .T. ) ; +#2425 = VERTEX_POINT ( 'NONE', #4646 ) ; +#2426 = CIRCLE ( 'NONE', #4494, 2.500000000000000000 ) ; +#2427 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -4.999999999999999100, 17.50000000000000000 ) ) ; +#2428 = ORIENTED_EDGE ( 'NONE', *, *, #4080, .T. ) ; +#2430 = CARTESIAN_POINT ( 'NONE', ( 10.74411072778117500, -5.690355937288491500, 17.52394423124949100 ) ) ; +#2429 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 18.23223304703364200 ) ) ; +#2431 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.86093283454109200, -53.49654541540286300 ) ) ; +#2432 = EDGE_CURVE ( 'NONE', #3164, #868, #3829, .T. ) ; +#2433 = VECTOR ( 'NONE', #3630, 1000.000000000000000 ) ; +#2434 = VERTEX_POINT ( 'NONE', #1814 ) ; +#2435 = CARTESIAN_POINT ( 'NONE', ( 18.68693447853213000, 8.089255650988798500, 18.23223304703363800 ) ) ; +#2436 = ORIENTED_EDGE ( 'NONE', *, *, #2019, .F. ) ; +#2437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2438 = CC_DESIGN_APPROVAL ( #2139, ( #1334 ) ) ; +#2439 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.000000000000005300, -7.499999999999995600 ) ) ; +#2440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2441 = EDGE_CURVE ( 'NONE', #2323, #4060, #705, .T. ) ; +#2442 = CIRCLE ( 'NONE', #4544, 11.03553390593273800 ) ; +#2443 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2444 = CARTESIAN_POINT ( 'NONE', ( 13.10029500203292200, 24.44269295272596000, -58.99034533403648300 ) ) ; +#2445 = ADVANCED_FACE ( 'NONE', ( #562 ), #2890, .T. ) ; +#2446 = PERSON_AND_ORGANIZATION ( #4449, #3515 ) ; +#2447 = CIRCLE ( 'NONE', #4312, 1.000000000000000700 ) ; +#2448 = FACE_OUTER_BOUND ( 'NONE', #4301, .T. ) ; +#2449 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#2450 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( 19.36732754874577700, 7.844516862624405300, 17.79836430621188700 ) ) ; +#2452 = CIRCLE ( 'NONE', #3090, 2.500000000000000900 ) ; +#2453 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000002700, 14.19364074059508600, -23.15088031259204000 ) ) ; +#2454 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.894746960659728700, 17.14599244172028800 ) ) ; +#2455 = AXIS2_PLACEMENT_3D ( 'NONE', #422, #3275, #839 ) ; +#2456 = CARTESIAN_POINT ( 'NONE', ( 15.15283682808061100, 8.481179133494654500, 21.24382361808990900 ) ) ; +#2457 = CARTESIAN_POINT ( 'NONE', ( 13.02130396212216600, 11.17157005558599200, -21.48162508982730000 ) ) ; +#2458 = CARTESIAN_POINT ( 'NONE', ( 1.300786724594837300E-014, 9.448643251978278800, 16.62556765413998900 ) ) ; +#2459 = VERTEX_POINT ( 'NONE', #3456 ) ; +#2460 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1470, #1864, #1489 ), + ( #4324, #1885, #4715 ), + ( #2295, #5121, #2692 ), + ( #256, #3095, #666 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0009065014181572169600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4082482904638645700, 1.000000000000000000), + ( 1.000000000000000000, 0.3944532028975497600, 1.000000000000000000), + ( 1.000000000000000000, 0.3869143520433853100, 1.000000000000000000), + ( 1.000000000000000000, 0.3869539162915043300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2461 = EDGE_LOOP ( 'NONE', ( #2646, #2340, #1348, #371, #5176 ) ) ; +#2462 = EDGE_CURVE ( 'NONE', #1381, #581, #1963, .T. ) ; +#2463 = CARTESIAN_POINT ( 'NONE', ( 0.4039045983049736600, 4.457527416353489300, 17.99271596417262500 ) ) ; +#2464 = ADVANCED_FACE ( 'NONE', ( #3711 ), #2514, .T. ) ; +#2465 = ORIENTED_EDGE ( 'NONE', *, *, #2787, .T. ) ; +#2466 = AXIS2_PLACEMENT_3D ( 'NONE', #80, #504, #3356 ) ; +#2467 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#2468 = EDGE_CURVE ( 'NONE', #3366, #3763, #4772, .T. ) ; +#2469 = ORIENTED_EDGE ( 'NONE', *, *, #2864, .F. ) ; +#2470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2471 = ORIENTED_EDGE ( 'NONE', *, *, #2081, .T. ) ; +#2472 = CARTESIAN_POINT ( 'NONE', ( 0.5503677054166326000, 8.158611682433971200, 17.76544693352769500 ) ) ; +#2473 = VERTEX_POINT ( 'NONE', #5187 ) ; +#2474 = CARTESIAN_POINT ( 'NONE', ( 2.878132188134543400, 10.00000000000000400, 16.46446609406728400 ) ) ; +#2475 = ORIENTED_EDGE ( 'NONE', *, *, #1056, .T. ) ; +#2476 = ORIENTED_EDGE ( 'NONE', *, *, #4184, .F. ) ; +#2477 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000054600, 15.25098999968557200, -25.29019920614993900 ) ) ; +#2478 = CARTESIAN_POINT ( 'NONE', ( 0.9190075362025838000, -0.9181799215458079600, 17.50000000000000000 ) ) ; +#2479 = VERTEX_POINT ( 'NONE', #2321 ) ; +#2480 = CARTESIAN_POINT ( 'NONE', ( 11.33771467849750700, 14.73062668621868300, -66.49277814155971100 ) ) ; +#2481 = CARTESIAN_POINT ( 'NONE', ( 13.61734010709672800, 14.55233731295478500, -61.33788094586268600 ) ) ; +#2482 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1224, 'distance_accuracy_value', 'NONE'); +#2483 = CIRCLE ( 'NONE', #3929, 0.5800000000000006300 ) ; +#2484 = DIRECTION ( 'NONE', ( 0.7899916495555907600, -7.090596649137518100E-017, -0.6131176017962921600 ) ) ; +#2485 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.673617379884035500E-016, -1.000000000000000000 ) ) ; +#2486 = ORIENTED_EDGE ( 'NONE', *, *, #4756, .F. ) ; +#2487 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2488 = ADVANCED_FACE ( 'NONE', ( #2603 ), #1576, .T. ) ; +#2489 = LINE ( 'NONE', #3458, #1402 ) ; +#2490 = ORIENTED_EDGE ( 'NONE', *, *, #2107, .F. ) ; +#2491 = CIRCLE ( 'NONE', #1896, 1.000000000000000900 ) ; +#2492 = EDGE_CURVE ( 'NONE', #1649, #742, #2496, .T. ) ; +#2493 = ORIENTED_EDGE ( 'NONE', *, *, #5133, .F. ) ; +#2494 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 14.50935294783795400, -26.81835075481547600 ) ) ; +#2495 = EDGE_CURVE ( 'NONE', #2479, #590, #4931, .T. ) ; +#2496 = LINE ( 'NONE', #4493, #4631 ) ; +#2497 = CARTESIAN_POINT ( 'NONE', ( 6.709575781549056700, 13.98376155134971600, -65.91737163022743600 ) ) ; +#2498 = CARTESIAN_POINT ( 'NONE', ( 11.52937266801830100, 10.96974120475869100, -63.17390716769549600 ) ) ; +#2499 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999995600, 20.96533279648316400, -53.78041229006791500 ) ) ; +#2500 = CIRCLE ( 'NONE', #3438, 1.000000000000000700 ) ; +#2501 = TOROIDAL_SURFACE ( 'NONE', #4421, 101.4290542974443200, 1.000000000000000000 ) ; +#2502 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 22.50000000000000400 ) ) ; +#2503 = CIRCLE ( 'NONE', #1278, 0.9999999999999991100 ) ; +#2504 = AXIS2_PLACEMENT_3D ( 'NONE', #3482, #1043, #3900 ) ; +#2506 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4068, #1221, #2029, #4860 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.577014193873502000E-018, 0.0008400029179392346700 ), + .UNSPECIFIED. ) ; +#2505 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 9.000000000000014200, 15.50302343377306800 ) ) ; +#2507 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000001100, 23.22519872755274400, -56.85711359142337800 ) ) ; +#2508 = CIRCLE ( 'NONE', #3313, 1.000000000000000900 ) ; +#2509 = ADVANCED_FACE ( 'NONE', ( #1412 ), #4033, .T. ) ; +#2510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890700900 ) ) ; +#2511 = CARTESIAN_POINT ( 'NONE', ( 11.46682733897798400, 14.69169250610281800, -66.46772359430133300 ) ) ; +#2512 = VERTEX_POINT ( 'NONE', #4642 ) ; +#2513 = AXIS2_PLACEMENT_3D ( 'NONE', #874, #3731, #1291 ) ; +#2514 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1873, #4741, #5150 ), + ( #2719, #284, #3129 ), + ( #697, #3557, #1117 ), + ( #3972, #1532, #4370 ), + ( #1931, #4765, #2341 ), + ( #5169, #2741, #303 ), + ( #3147, #720, #3578 ), + ( #1138, #3991, #1553 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0008947294286944665700, 0.001789458857388933100, 0.003578917714777866300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4082482904638623500, 1.000000000000000000), + ( 1.000000000000000000, 0.4217630254023073700, 1.000000000000000000), + ( 1.000000000000000000, 0.4409794646817781800, 1.000000000000000000), + ( 1.000000000000000000, 0.4858394257877014500, 1.000000000000000000), + ( 1.000000000000000000, 0.5114363594855112500, 1.000000000000000000), + ( 1.000000000000000000, 0.5921407099079483100, 1.000000000000000000), + ( 1.000000000000000000, 0.6510359085616364000, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865487900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2515 = CARTESIAN_POINT ( 'NONE', ( 12.40207786442647200, 13.48795164088969600, -20.61832846191090200 ) ) ; +#2516 = CARTESIAN_POINT ( 'NONE', ( 19.49449540169506500, 4.459764377137079600, 17.99271596417261800 ) ) ; +#2517 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#2518 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2519 = ORIENTED_EDGE ( 'NONE', *, *, #2941, .T. ) ; +#2520 = ORIENTED_EDGE ( 'NONE', *, *, #890, .F. ) ; +#2521 = EDGE_CURVE ( 'NONE', #4601, #1517, #4524, .T. ) ; +#2522 = ORIENTED_EDGE ( 'NONE', *, *, #1761, .F. ) ; +#2523 = ORIENTED_EDGE ( 'NONE', *, *, #4953, .F. ) ; +#2524 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 21.18146909592108400, -54.33616881573233600 ) ) ; +#2525 = EDGE_CURVE ( 'NONE', #581, #1595, #2371, .T. ) ; +#2526 = ORIENTED_EDGE ( 'NONE', *, *, #2750, .T. ) ; +#2527 = CARTESIAN_POINT ( 'NONE', ( 9.495379424155993700, 15.54705907013310200, -62.04873404026839300 ) ) ; +#2528 = EDGE_LOOP ( 'NONE', ( #73, #4908, #3568, #4171 ) ) ; +#2529 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 3.258686208197970400, -29.95633160533159200 ) ) ; +#2530 = CARTESIAN_POINT ( 'NONE', ( 14.56843152253557600, 11.39992685756824300, -22.38385642104927000 ) ) ; +#2531 = DIRECTION ( 'NONE', ( -4.489794735692344400E-016, -0.2588190451025159100, 0.9659258262890697600 ) ) ; +#2532 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, 13.40741737109299000, -20.21665475151214500 ) ) ; +#2533 = CARTESIAN_POINT ( 'NONE', ( 4.151966109247746700, 24.22314362633310100, -60.90088058810026400 ) ) ; +#2534 = ADVANCED_FACE ( 'NONE', ( #1288 ), #50, .T. ) ; +#2535 = ORIENTED_EDGE ( 'NONE', *, *, #3783, .F. ) ; +#2536 = CIRCLE ( 'NONE', #1795, 10.00000000000000200 ) ; +#2537 = ORIENTED_EDGE ( 'NONE', *, *, #3083, .T. ) ; +#2538 = ORIENTED_EDGE ( 'NONE', *, *, #1507, .T. ) ; +#2539 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#2540 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#2541 = FACE_OUTER_BOUND ( 'NONE', #4123, .T. ) ; +#2542 = ORIENTED_EDGE ( 'NONE', *, *, #4885, .F. ) ; +#2543 = CARTESIAN_POINT ( 'NONE', ( 9.033954427151572400, 10.63129760686179800, -63.37850335946024700 ) ) ; +#2544 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, -4.374999999999900500, -1.172277716886104300 ) ) ; +#2545 = CIRCLE ( 'NONE', #3996, 100.7154346165994700 ) ; +#2546 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#2547 = CARTESIAN_POINT ( 'NONE', ( 17.07895407590321900, 3.508986349822869100, -28.21216975615571300 ) ) ; +#2548 = ORIENTED_EDGE ( 'NONE', *, *, #5199, .T. ) ; +#2549 = CARTESIAN_POINT ( 'NONE', ( 5.091490390727602600, 24.20068771402690900, -61.91976024754468000 ) ) ; +#2550 = EDGE_CURVE ( 'NONE', #2145, #4371, #2225, .T. ) ; +#2551 = LINE ( 'NONE', #5258, #1481 ) ; +#2552 = AXIS2_PLACEMENT_3D ( 'NONE', #154, #2618, #568 ) ; +#2553 = EDGE_CURVE ( 'NONE', #4616, #868, #3044, .T. ) ; +#2554 = FACE_OUTER_BOUND ( 'NONE', #5134, .T. ) ; +#2555 = VERTEX_POINT ( 'NONE', #4719 ) ; +#2556 = ADVANCED_FACE ( 'NONE', ( #3440 ), #175, .T. ) ; +#2557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#2558 = CARTESIAN_POINT ( 'NONE', ( 5.862487690312708100, 13.52341386436674900, -65.45640775385629700 ) ) ; +#2559 = FACE_OUTER_BOUND ( 'NONE', #2528, .T. ) ; +#2560 = CARTESIAN_POINT ( 'NONE', ( 9.026341311491522700, 15.48455879006529500, -62.02078417469441300 ) ) ; +#2561 = AXIS2_PLACEMENT_3D ( 'NONE', #2829, #396, #3247 ) ; +#2562 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.38236512735786500, -23.98686181020539700 ) ) ; +#2563 = CARTESIAN_POINT ( 'NONE', ( 18.20948834146491200, 11.05126379376880100, -56.08018304708719600 ) ) ; +#2564 = CARTESIAN_POINT ( 'NONE', ( 18.68693447853213400, 8.089255650988798500, 18.23223304703364200 ) ) ; +#2565 = CARTESIAN_POINT ( 'NONE', ( 10.63897783505422700, 23.49643866827396400, -64.26410735998574400 ) ) ; +#2566 = FACE_OUTER_BOUND ( 'NONE', #3198, .T. ) ; +#2567 = AXIS2_PLACEMENT_3D ( 'NONE', #1202, #4056, #1614 ) ; +#2568 = VERTEX_POINT ( 'NONE', #1094 ) ; +#2569 = CARTESIAN_POINT ( 'NONE', ( -1.914785753760941600E-012, 1.363080471930833400, -31.33380214770321700 ) ) ; +#2570 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753878800, 14.11082393428803700, -60.50305359653265200 ) ) ; +#2571 = EDGE_LOOP ( 'NONE', ( #4506, #4172, #2283, #1143 ) ) ; +#2572 = CARTESIAN_POINT ( 'NONE', ( 1.649793379827204900, 2.979730832327786200, -31.07961970338182000 ) ) ; +#2573 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.358343471931526400, -26.90678312694817000 ) ) ; +#2574 = CARTESIAN_POINT ( 'NONE', ( 15.04008068729724100, 24.21791064200634800, -61.68067602406863900 ) ) ; +#2575 = ORIENTED_EDGE ( 'NONE', *, *, #1198, .T. ) ; +#2576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2577 = ADVANCED_FACE ( 'NONE', ( #1164 ), #2108, .F. ) ; +#2578 = ORIENTED_EDGE ( 'NONE', *, *, #3758, .T. ) ; +#2579 = EDGE_CURVE ( 'NONE', #114, #2708, #2117, .T. ) ; +#2580 = ORIENTED_EDGE ( 'NONE', *, *, #1065, .F. ) ; +#2581 = EDGE_CURVE ( 'NONE', #4015, #804, #208, .T. ) ; +#2582 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2583 = ORIENTED_EDGE ( 'NONE', *, *, #5158, .F. ) ; +#2584 = CARTESIAN_POINT ( 'NONE', ( 18.25624070560640500, 14.47792757161710500, -26.50787678745123400 ) ) ; +#2585 = EDGE_CURVE ( 'NONE', #3763, #2703, #3318, .T. ) ; +#2586 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.77489008581955700, -26.94531476495734200 ) ) ; +#2587 = VERTEX_POINT ( 'NONE', #1947 ) ; +#2588 = CARTESIAN_POINT ( 'NONE', ( 1.774018357351882700E-012, 0.6399606810270933600, -28.08772375312151600 ) ) ; +#2589 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338501700, 14.59610964385531200, -62.31416452082462600 ) ) ; +#2590 = CARTESIAN_POINT ( 'NONE', ( 1.657305493190508900, 14.51727022832085400, -26.81524872350243500 ) ) ; +#2591 = LINE ( 'NONE', #731, #159 ) ; +#2592 = VERTEX_POINT ( 'NONE', #3125 ) ; +#2593 = CARTESIAN_POINT ( 'NONE', ( -5.931842503843286000E-012, 23.06473693341272800, -52.73832377318143500 ) ) ; +#2594 = CARTESIAN_POINT ( 'NONE', ( 17.56358802176748000, -0.4691715405952454100, -25.54878574965001500 ) ) ; +#2595 = CYLINDRICAL_SURFACE ( 'NONE', #487, 0.9999999999999998900 ) ; +#2596 = ORIENTED_EDGE ( 'NONE', *, *, #4406, .F. ) ; +#2597 = ADVANCED_FACE ( 'NONE', ( #4410 ), #1155, .F. ) ; +#2598 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 14.93412558258007800, -27.57214587224189700 ) ) ; +#2599 = FACE_OUTER_BOUND ( 'NONE', #4119, .T. ) ; +#2600 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000209800, 9.377008447877909000, -56.18111401708258500 ) ) ; +#2601 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ; +#2602 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 21.88378297452253200, -55.98265174115145000 ) ) ; +#2603 = FACE_OUTER_BOUND ( 'NONE', #1208, .T. ) ; +#2604 = CARTESIAN_POINT ( 'NONE', ( 1.612214176152439100, 2.281678214455650000, -29.87011571550820200 ) ) ; +#2605 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, 7.455127018922267400, 1.997595264191612600 ) ) ; +#2606 = EDGE_CURVE ( 'NONE', #730, #3300, #4265, .T. ) ; +#2607 = CARTESIAN_POINT ( 'NONE', ( 1.052622348616536300, 8.026124936461197700, 18.10351783898501700 ) ) ; +#2608 = CYLINDRICAL_SURFACE ( 'NONE', #3320, 0.9999999999999994400 ) ; +#2609 = EDGE_CURVE ( 'NONE', #4069, #730, #787, .T. ) ; +#2610 = CIRCLE ( 'NONE', #725, 100.0000000000000000 ) ; +#2611 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2612 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025138600, 0.9659258262890703100 ) ) ; +#2613 = CARTESIAN_POINT ( 'NONE', ( 13.37700386910197800, 10.00000000000000200, 19.72762061406083200 ) ) ; +#2614 = LINE ( 'NONE', #1038, #4647 ) ; +#2615 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, 1.112410224249743300, -25.38722134670425800 ) ) ; +#2616 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2617 = AXIS2_PLACEMENT_3D ( 'NONE', #3427, #3449, #1008 ) ; +#2618 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2619 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.625531029949085900E-016 ) ) ; +#2621 = ADVANCED_FACE ( 'NONE', ( #4146 ), #1992, .T. ) ; +#2622 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2820, #5251, #385, #4317, #3424, #987, #3843, #1410, #4242, #1803 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 2.549512416582222300E-017, 0.0009031335992338554400, 0.001806267198467685500, 0.002709400797701515300, 0.003612534396935345400 ), + .UNSPECIFIED. ) ; +#2623 = ORIENTED_EDGE ( 'NONE', *, *, #1764, .T. ) ; +#2624 = CARTESIAN_POINT ( 'NONE', ( 0.8948857156376727200, -0.7576586040401831500, 17.50000000000000000 ) ) ; +#2625 = CARTESIAN_POINT ( 'NONE', ( 2.449199999991773500, 20.78604697036789200, -53.15220561627395300 ) ) ; +#2626 = CARTESIAN_POINT ( 'NONE', ( 12.19136374979210500, 20.89973775983623500, -60.28416201532461100 ) ) ; +#2627 = CARTESIAN_POINT ( 'NONE', ( 16.10474443775053600, 13.30523980087243900, -19.83532286805511900 ) ) ; +#2628 = VERTEX_POINT ( 'NONE', #1189 ) ; +#2629 = ORIENTED_EDGE ( 'NONE', *, *, #3554, .F. ) ; +#2630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890698700, 0.2588190451025151900 ) ) ; +#2631 = ORIENTED_EDGE ( 'NONE', *, *, #332, .T. ) ; +#2632 = ORIENTED_EDGE ( 'NONE', *, *, #942, .T. ) ; +#2633 = ORIENTED_EDGE ( 'NONE', *, *, #2717, .T. ) ; +#2634 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -2.303712776097199500E-014, -1.000000000000000000 ) ) ; +#2635 = EDGE_CURVE ( 'NONE', #925, #2708, #1020, .T. ) ; +#2636 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 20.72074773948791600, -52.90850133609142600 ) ) ; +#2637 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2638 = ORIENTED_EDGE ( 'NONE', *, *, #4128, .T. ) ; +#2639 = ORIENTED_EDGE ( 'NONE', *, *, #1198, .F. ) ; +#2640 = CARTESIAN_POINT ( 'NONE', ( 2.043462738821782400E-014, 3.450527263731426600, 17.63729942090223100 ) ) ; +#2641 = EDGE_CURVE ( 'NONE', #2425, #2914, #390, .T. ) ; +#2642 = CARTESIAN_POINT ( 'NONE', ( 5.338766497390976100, 21.19129168855564400, -58.92572744690478000 ) ) ; +#2643 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.86465097997586900, -56.52658611636667300 ) ) ; +#2644 = EDGE_CURVE ( 'NONE', #231, #3752, #5213, .T. ) ; +#2645 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2646 = ORIENTED_EDGE ( 'NONE', *, *, #1544, .F. ) ; +#2647 = CIRCLE ( 'NONE', #4892, 2.500000000000002700 ) ; +#2648 = CARTESIAN_POINT ( 'NONE', ( 17.43615724476324800, 11.71611041067209900, -55.84655681002652000 ) ) ; +#2649 = AXIS2_PLACEMENT_3D ( 'NONE', #5286, #4946, #69 ) ; +#2650 = ORIENTED_EDGE ( 'NONE', *, *, #523, .F. ) ; +#2651 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 18.09635858759372700, -61.37627564304205000 ) ) ; +#2652 = ORIENTED_EDGE ( 'NONE', *, *, #5048, .F. ) ; +#2653 = CARTESIAN_POINT ( 'NONE', ( -2.721144153831560100E-013, 10.33772244953868700, -57.88766767893987000 ) ) ; +#2655 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 10.00000000000000000, -7.500000000000000900 ) ) ; +#2654 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2656 = FACE_OUTER_BOUND ( 'NONE', #1121, .T. ) ; +#2657 = CARTESIAN_POINT ( 'NONE', ( 17.43657552694173800, 19.78571229714222600, -53.68003373877671400 ) ) ; +#2658 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2659 = VERTEX_POINT ( 'NONE', #3650 ) ; +#2660 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2661 = CARTESIAN_POINT ( 'NONE', ( 18.28618582384765600, 2.281678214454073900, -29.87011571550594300 ) ) ; +#2662 = CARTESIAN_POINT ( 'NONE', ( 13.37700147632475700, 10.00000000000000400, 19.72762246572329700 ) ) ; +#2663 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.182485924556992500, 17.15619054515968900 ) ) ; +#2664 = LINE ( 'NONE', #2301, #4694 ) ; +#2665 = AXIS2_PLACEMENT_3D ( 'NONE', #1449, #4282, #1845 ) ; +#2666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -2.312964634635743900E-016, -1.000000000000000000 ) ) ; +#2667 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 18.09635858759372700, -61.37627564304205000 ) ) ; +#2668 = VERTEX_POINT ( 'NONE', #4059 ) ; +#2669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2670 = CARTESIAN_POINT ( 'NONE', ( 18.73902503172153500, 11.21956236678293100, -59.37197679152274800 ) ) ; +#2671 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.96819975629100500, -27.83096491734441400 ) ) ; +#2672 = CARTESIAN_POINT ( 'NONE', ( 1.465819638090649200, 0.07908924029612166000, -26.59738725960125200 ) ) ; +#2673 = AXIS2_PLACEMENT_3D ( 'NONE', #3193, #759, #3613 ) ; +#2674 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.81382236340611600, -56.23255212013585700 ) ) ; +#2675 = VECTOR ( 'NONE', #3639, 999.9999999999998900 ) ; +#2676 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 11.62051269293464100, -55.34690196774870700 ) ) ; +#2677 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2678 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#2679 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 12.18129507813263500, -62.96121213358091500 ) ) ; +#2680 = CIRCLE ( 'NONE', #3448, 100.0000000000000000 ) ; +#2681 = EDGE_CURVE ( 'NONE', #1811, #4545, #4039, .T. ) ; +#2682 = CARTESIAN_POINT ( 'NONE', ( 18.02229887931254400, 8.137231471265277300, 18.84286555924308400 ) ) ; +#2683 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 11.97360081106326900, -57.41479171415155500 ) ) ; +#2684 = FACE_OUTER_BOUND ( 'NONE', #147, .T. ) ; +#2685 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.88990026214254300, -27.53874722633849700 ) ) ; +#2686 = CC_DESIGN_SECURITY_CLASSIFICATION ( #1334, ( #5242 ) ) ; +#2687 = EDGE_CURVE ( 'NONE', #873, #3000, #900, .T. ) ; +#2688 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#2689 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, 12.65446821274873000, -55.06985442120483000 ) ) ; +#2690 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4409, #1930, #3610 ), + ( #1174, #4029, #1583 ), + ( #4424, #1990, #4820 ), + ( #2400, #5224, #2797 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.007460220593847844200, 0.008475508232904306600 ), + ( 0.4660998205150200800, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.8542265893537606100, 0.8436242579055639500, 1.000000000000000000), + ( 0.8565869061134404600, 0.8461562442481802600, 1.000000000000000000), + ( 0.8577835393157731100, 0.8474399104819608800, 1.000000000000000000), + ( 0.8577841975454656400, 0.8474406165857433200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2691 = ORIENTED_EDGE ( 'NONE', *, *, #3200, .T. ) ; +#2692 = CARTESIAN_POINT ( 'NONE', ( 18.19786666672547800, 14.58518065344515000, -27.37635425309581500 ) ) ; +#2693 = CARTESIAN_POINT ( 'NONE', ( 1.211465521467869600, 8.089255650988796700, 18.23223304703363800 ) ) ; +#2694 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 14.19364074059509000, -23.15088031259205400 ) ) ; +#2695 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 8.999999999999989300, 5.665249758739323100 ) ) ; +#2696 = EDGE_LOOP ( 'NONE', ( #2343, #5064, #74, #2580 ) ) ; +#2697 = DIRECTION ( 'NONE', ( -1.000000000000000000, -6.915161896257734700E-017, 2.580773553939889600E-016 ) ) ; +#2698 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#2699 = CARTESIAN_POINT ( 'NONE', ( 8.447873358058764400, 12.82990441622170500, -17.95625033324468900 ) ) ; +#2700 = VERTEX_POINT ( 'NONE', #2827 ) ; +#2701 = AXIS2_PLACEMENT_3D ( 'NONE', #5271, #4088, #3673 ) ; +#2702 = VERTEX_POINT ( 'NONE', #3245 ) ; +#2703 = VERTEX_POINT ( 'NONE', #809 ) ; +#2704 = CARTESIAN_POINT ( 'NONE', ( 18.89840000000003400, 10.00000000000000200, 15.31390237722992300 ) ) ; +#2705 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 18.09635858759372700, -61.37627564304205000 ) ) ; +#2707 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#2706 = CARTESIAN_POINT ( 'NONE', ( 2.547074394698924000, 4.008546980234343400, -29.10639981074184800 ) ) ; +#2708 = VERTEX_POINT ( 'NONE', #3665 ) ; +#2709 = EDGE_CURVE ( 'NONE', #3349, #2095, #5273, .T. ) ; +#2710 = CARTESIAN_POINT ( 'NONE', ( 17.58480559842385600, 10.00000000000000400, 15.98543543494561300 ) ) ; +#2711 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 7.949766565851369600, -5.369866468664239900 ) ) ; +#2712 = CARTESIAN_POINT ( 'NONE', ( 6.271411272735342400, 11.24791869819833700, -21.78893845415958800 ) ) ; +#2713 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -0.7915319382095150600, 17.39997592866755100 ) ) ; +#2714 = ORIENTED_EDGE ( 'NONE', *, *, #5133, .T. ) ; +#2715 = AXIS2_PLACEMENT_3D ( 'NONE', #3393, #957, #3807 ) ; +#2716 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2717 = EDGE_CURVE ( 'NONE', #542, #231, #5069, .T. ) ; +#2718 = CARTESIAN_POINT ( 'NONE', ( 5.701228343858609500, 21.19524571052420500, -59.19740476889642600 ) ) ; +#2719 = CARTESIAN_POINT ( 'NONE', ( -6.505213034913026600E-016, 13.72406146925099100, -26.65128076872587600 ) ) ; +#2720 = CIRCLE ( 'NONE', #1735, 1.000000000000000700 ) ; +#2721 = EDGE_LOOP ( 'NONE', ( #478, #3286, #4091, #363 ) ) ; +#2722 = ORIENTED_EDGE ( 'NONE', *, *, #2941, .F. ) ; +#2723 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.759847042702462600, 16.20941206712945300 ) ) ; +#2724 = AXIS2_PLACEMENT_3D ( 'NONE', #1085, #3938, #1500 ) ; +#2725 = VECTOR ( 'NONE', #4164, 1000.000000000000000 ) ; +#2726 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#2727 = EDGE_LOOP ( 'NONE', ( #3655, #1327, #2083, #1275 ) ) ; +#2729 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999200, 1.320581149576787400, -31.07156646030475900 ) ) ; +#2728 = CARTESIAN_POINT ( 'NONE', ( 3.590613714425998600, 0.4479397510063466400, -27.30419020914271000 ) ) ; +#2730 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 21.65584463200417500, -52.65794287889685400 ) ) ; +#2731 = CIRCLE ( 'NONE', #810, 2.499999999999998700 ) ; +#2732 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2733 = EDGE_LOOP ( 'NONE', ( #3387, #4287, #2905, #2469 ) ) ; +#2734 = CARTESIAN_POINT ( 'NONE', ( 7.557822999326340600, 12.86752149267871600, -18.11063567162132100 ) ) ; +#2735 = CARTESIAN_POINT ( 'NONE', ( 19.45429691482755500, 3.420281843435478000, 17.93324955198673000 ) ) ; +#2736 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#2737 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002900, 0.1475758593047448400, -25.16574202084320100 ) ) ; +#2738 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999997600, 19.85087708119872500, -53.92323202904130900 ) ) ; +#2739 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991400, 12.65446821274873200, -55.06985442120482300 ) ) ; +#2740 = FACE_OUTER_BOUND ( 'NONE', #1072, .T. ) ; +#2741 = CARTESIAN_POINT ( 'NONE', ( -2.057030779735522200E-013, 14.82791243533900300, -24.44310196606444300 ) ) ; +#2742 = CARTESIAN_POINT ( 'NONE', ( 9.123947673237372800, -9.999999999999998200, 16.92315235817421000 ) ) ; +#2743 = CARTESIAN_POINT ( 'NONE', ( 7.606763679746046900, 24.79683884536257600, -59.24295650635804800 ) ) ; +#2744 = CIRCLE ( 'NONE', #1687, 4.999999999999997300 ) ; +#2745 = CARTESIAN_POINT ( 'NONE', ( 19.35923699728391900, 7.848783069637214300, 17.80887397500187000 ) ) ; +#2746 = CIRCLE ( 'NONE', #3285, 7.500000000000003600 ) ; +#2748 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 18.09635858759372700, -61.37627564304205000 ) ) ; +#2747 = CARTESIAN_POINT ( 'NONE', ( 3.658320153311314500, -1.092541982358782100, -24.38977345621053100 ) ) ; +#2749 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 21.37707447146857800, -54.89995122737440900 ) ) ; +#2750 = EDGE_CURVE ( 'NONE', #4881, #2568, #2919, .T. ) ; +#2751 = CIRCLE ( 'NONE', #3599, 4.999999999999997300 ) ; +#2752 = CARTESIAN_POINT ( 'NONE', ( 9.720033838996219100, 13.37868247554742700, -20.22438786352609000 ) ) ; +#2753 = EDGE_CURVE ( 'NONE', #2459, #2479, #775, .T. ) ; +#2754 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 6.945553274781928200, 17.05399184765605400 ) ) ; +#2755 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 8.759847035867492700, 16.20941206333383600 ) ) ; +#2756 = CARTESIAN_POINT ( 'NONE', ( 2.206514149969922100, 10.00000000000000200, 18.47897135504025500 ) ) ; +#2757 = CARTESIAN_POINT ( 'NONE', ( 13.93194409188813800, -5.198558500001556800, 17.50000000000000000 ) ) ; +#2758 = CARTESIAN_POINT ( 'NONE', ( 7.547809325833603600, 23.75185014294613600, -63.73069372530395800 ) ) ; +#2759 = ORIENTED_EDGE ( 'NONE', *, *, #3120, .T. ) ; +#2760 = CARTESIAN_POINT ( 'NONE', ( 18.43701686998208100, 11.13720074835905300, -57.90638189271376000 ) ) ; +#2761 = VERTEX_POINT ( 'NONE', #4078 ) ; +#2762 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2763 = ORIENTED_EDGE ( 'NONE', *, *, #3513, .F. ) ; +#2765 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 1.411454811423603900, -31.54453161432910200 ) ) ; +#2764 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666666700, 11.07935950138771900, -56.35951613027771900 ) ) ; +#2766 = CARTESIAN_POINT ( 'NONE', ( 1.686179656739927900, 10.00000000000000000, 15.60096078962559800 ) ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 1.515023434856919100, 14.45483937379594300, -25.57920776638025700 ) ) ; +#2768 = ORIENTED_EDGE ( 'NONE', *, *, #3479, .F. ) ; +#2769 = AXIS2_PLACEMENT_3D ( 'NONE', #1423, #3031, #3858 ) ; +#2770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025146900 ) ) ; +#2771 = ORIENTED_EDGE ( 'NONE', *, *, #1300, .T. ) ; +#2772 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.57169936750044500, -25.76989476723137400 ) ) ; +#2773 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999997300, 7.499999999999996400 ) ) ; +#2774 = CARTESIAN_POINT ( 'NONE', ( 6.178584552906517800, 10.00000000000000400, 19.44377072374403100 ) ) ; +#2775 = CARTESIAN_POINT ( 'NONE', ( 1.897859226587749900, 8.138802051523550000, 18.86285577146077200 ) ) ; +#2776 = ORIENTED_EDGE ( 'NONE', *, *, #5125, .T. ) ; +#2777 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000163700, 23.06473693342694600, -52.73832377314757000 ) ) ; +#2778 = PLANE ( 'NONE', #97 ) ; +#2779 = CARTESIAN_POINT ( 'NONE', ( 9.720966308838042000, 20.63023805016854700, -60.69729687822733400 ) ) ; +#2780 = ORIENTED_EDGE ( 'NONE', *, *, #2248, .T. ) ; +#2781 = AXIS2_PLACEMENT_3D ( 'NONE', #2499, #38, #2889 ) ; +#2782 = CARTESIAN_POINT ( 'NONE', ( 19.81870044000786300, 1.631190395245999400, -29.73945079322254500 ) ) ; +#2783 = ORIENTED_EDGE ( 'NONE', *, *, #4613, .T. ) ; +#2785 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 20.68991880571509900, -52.91676192399936700 ) ) ; +#2784 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-016, 9.318741722734069200, -55.96365964037531900 ) ) ; +#2786 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 110.0000000000000000, 5.665249758739311600 ) ) ; +#2787 = EDGE_CURVE ( 'NONE', #1577, #2112, #4947, .T. ) ; +#2788 = ORIENTED_EDGE ( 'NONE', *, *, #413, .T. ) ; +#2789 = ORIENTED_EDGE ( 'NONE', *, *, #4609, .F. ) ; +#2790 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333800, 21.66487829819825400, -53.52313491720788400 ) ) ; +#2791 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2671, #1856, #5112 ), + ( #2685, #246, #3086 ), + ( #658, #3521, #1081 ), + ( #3935, #1499, #4337 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0009065014181572180400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.3869539162915045500, 1.000000000000000000), + ( 1.000000000000000000, 0.3869143520434275000, 1.000000000000000000), + ( 1.000000000000000000, 0.3944532028975743000, 1.000000000000000000), + ( 1.000000000000000000, 0.4082482904638631800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2792 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2793 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 21.76776695296636200 ) ) ; +#2794 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666667400, 11.07935950138772100, -56.35951613027771900 ) ) ; +#2795 = CIRCLE ( 'NONE', #661, 5.123724356957924700 ) ; +#2796 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -4.999999999999999100, 17.50000000000000000 ) ) ; +#2797 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.93424423647693000, -28.10801246388829400 ) ) ; +#2798 = EDGE_CURVE ( 'NONE', #3483, #1378, #2806, .T. ) ; +#2799 = ORIENTED_EDGE ( 'NONE', *, *, #1205, .F. ) ; +#2800 = CARTESIAN_POINT ( 'NONE', ( 10.36481207674369500, 25.94748506541548100, -59.29805231998709300 ) ) ; +#2801 = ADVANCED_FACE ( 'NONE', ( #1724 ), #4844, .T. ) ; +#2802 = LINE ( 'NONE', #4290, #3768 ) ; +#2803 = VERTEX_POINT ( 'NONE', #2416 ) ; +#2804 = CARTESIAN_POINT ( 'NONE', ( 16.30778628557565900, 0.4479397510040980000, -27.30419020914482100 ) ) ; +#2805 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.96533279648385000, -53.78041229006976200 ) ) ; +#2806 = LINE ( 'NONE', #1599, #630 ) ; +#2807 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.894746960659718500, 17.14599244172028500 ) ) ; +#2808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2809 = VECTOR ( 'NONE', #805, 1000.000000000000000 ) ; +#2810 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 21.88378296930742900, -55.98265174325759100 ) ) ; +#2811 = FACE_OUTER_BOUND ( 'NONE', #4669, .T. ) ; +#2812 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666665200, 14.50935294783794700, -26.81835075481546600 ) ) ; +#2813 = AXIS2_PLACEMENT_3D ( 'NONE', #1182, #4847, #387 ) ; +#2814 = CARTESIAN_POINT ( 'NONE', ( 1.461106922425173600, 11.13723433920662100, -57.90791133592155400 ) ) ; +#2815 = CIRCLE ( 'NONE', #4086, 2.500000000000000000 ) ; +#2816 = CARTESIAN_POINT ( 'NONE', ( 0.7800836750959232500, 7.925951633723640200, 17.92326621286783400 ) ) ; +#2817 = CARTESIAN_POINT ( 'NONE', ( 13.20451694993956300, 23.93279216533105100, -63.24143501890233700 ) ) ; +#2818 = CYLINDRICAL_SURFACE ( 'NONE', #4298, 2.499999999999998700 ) ; +#2819 = EDGE_CURVE ( 'NONE', #3937, #4463, #1612, .T. ) ; +#2820 = CARTESIAN_POINT ( 'NONE', ( 19.35923699728373400, 7.848783069637248900, 17.80887397500196200 ) ) ; +#2822 = CARTESIAN_POINT ( 'NONE', ( 13.08502446469063200, -5.394672529420351000, 17.50791350180263700 ) ) ; +#2821 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2823 = CARTESIAN_POINT ( 'NONE', ( 5.984733905932705200, 5.000000000000000900, 22.50000000000000400 ) ) ; +#2824 = ADVANCED_FACE ( 'NONE', ( #3899 ), #1511, .T. ) ; +#2825 = EDGE_CURVE ( 'NONE', #211, #209, #3654, .T. ) ; +#2826 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 1.358343471938294100, -26.90678312696156700 ) ) ; +#2827 = CARTESIAN_POINT ( 'NONE', ( 19.49449540169506500, 4.999999999999924500, 17.99271596417261800 ) ) ; +#2828 = ORIENTED_EDGE ( 'NONE', *, *, #3758, .F. ) ; +#2829 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 22.50000000000000400 ) ) ; +#2830 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 22.07027925878595900, -52.54689545533517500 ) ) ; +#2831 = ORIENTED_EDGE ( 'NONE', *, *, #2525, .T. ) ; +#2832 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999660300, 10.00000000000000200, 15.31390237722991900 ) ) ; +#2833 = CARTESIAN_POINT ( 'NONE', ( 14.19711660839832300, 21.19519332482328600, -59.19739019280496700 ) ) ; +#2834 = AXIS2_PLACEMENT_3D ( 'NONE', #1228, #4079, #1638 ) ; +#2835 = EDGE_LOOP ( 'NONE', ( #4141, #1746, #4387, #4563, #3704, #1200, #4686, #3418, #1878 ) ) ; +#2836 = ORIENTED_EDGE ( 'NONE', *, *, #709, .F. ) ; +#2837 = ORIENTED_EDGE ( 'NONE', *, *, #1132, .F. ) ; +#2838 = DIRECTION ( 'NONE', ( 9.336181825398689400E-016, -0.2588190451025163000, 0.9659258262890696400 ) ) ; +#2839 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ; +#2840 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -4.999999999999999100, 16.50000000000000000 ) ) ; +#2841 = AXIS2_PLACEMENT_3D ( 'NONE', #4432, #2410, #5234 ) ; +#2842 = MECHANICAL_CONTEXT ( 'NONE', #2450, 'mechanical' ) ; +#2843 = CARTESIAN_POINT ( 'NONE', ( 18.22000301891776900, 10.00000000000000200, 15.59672861264944100 ) ) ; +#2844 = DIRECTION ( 'NONE', ( -0.7500000000000081000, 0.1711927069771129700, -0.6388998803238550300 ) ) ; +#2845 = VERTEX_POINT ( 'NONE', #2021 ) ; +#2846 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999500, 2.370875771991750800, 16.95638255745944500 ) ) ; +#2847 = CARTESIAN_POINT ( 'NONE', ( 14.39802294731750400, 8.614757265557617700, 21.76776695296850800 ) ) ; +#2848 = CARTESIAN_POINT ( 'NONE', ( 14.19835821358061900, 11.33223280874085500, -22.12207748753486700 ) ) ; +#2849 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.529450976789412700, 16.50785938500355600 ) ) ; +#2850 = ADVANCED_FACE ( 'NONE', ( #4698 ), #534, .T. ) ; +#2851 = AXIS2_PLACEMENT_3D ( 'NONE', #2502, #41, #2892 ) ; +#2852 = ORIENTED_EDGE ( 'NONE', *, *, #856, .T. ) ; +#2853 = ORIENTED_EDGE ( 'NONE', *, *, #220, .T. ) ; +#2854 = EDGE_CURVE ( 'NONE', #806, #4651, #2551, .T. ) ; +#2855 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, 12.93374564363919400, -28.10814606143651800 ) ) ; +#2856 = EDGE_CURVE ( 'NONE', #3483, #4973, #386, .T. ) ; +#2857 = CIRCLE ( 'NONE', #3879, 1.000000000000000000 ) ; +#2858 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#2859 = EDGE_LOOP ( 'NONE', ( #1329, #4000, #4594, #3250, #1701 ) ) ; +#2860 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999500, 24.01142209705481200, -59.79133915250319100 ) ) ; +#2861 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.14722090442170300, -62.70239308847838800 ) ) ; +#2862 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4024, #334, #2790 ), + ( #355, #3207, #771 ), + ( #3624, #1186, #4044 ), + ( #1598, #4437, #2002 ), + ( #4836, #2415, #5238 ), + ( #2810, #374, #3225 ), + ( #788, #3646, #1204 ), + ( #4058, #1618, #4456 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0008947294286944608200, 0.001789458857388921600, 0.003578917714777843300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4082482904638654000, 1.000000000000000000), + ( 1.000000000000000000, 0.4217630254025326900, 1.000000000000000000), + ( 1.000000000000000000, 0.4409794646814822500, 1.000000000000000000), + ( 1.000000000000000000, 0.4858394257880013800, 1.000000000000000000), + ( 1.000000000000000000, 0.5114363594856441400, 1.000000000000000000), + ( 1.000000000000000000, 0.5921407099076831900, 1.000000000000000000), + ( 1.000000000000000000, 0.6510359085618364600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865487900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2863 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#2864 = EDGE_CURVE ( 'NONE', #2136, #1647, #4875, .T. ) ; +#2865 = CIRCLE ( 'NONE', #4460, 5.000000000000000900 ) ; +#2866 = EDGE_LOOP ( 'NONE', ( #1281, #4976, #2522, #1163 ) ) ; +#2867 = CARTESIAN_POINT ( 'NONE', ( 1.626303258728257100E-016, 7.804772097074495800, 17.53238811383921100 ) ) ; +#2868 = LOCAL_TIME ( 15, 6, 45.00000000000000000, #3967 ) ; +#2869 = VECTOR ( 'NONE', #821, 1000.000000000000000 ) ; +#2870 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4230, #2971, #3832, #4626 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009110416949331794900 ), + .UNSPECIFIED. ) ; +#2871 = FACE_BOUND ( 'NONE', #3493, .T. ) ; +#2872 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.61152325961098200, -25.76380702499421800 ) ) ; +#2873 = CARTESIAN_POINT ( 'NONE', ( 6.872352358174180300, 7.500000000000003600, 20.00000000000001400 ) ) ; +#2874 = ADVANCED_FACE ( 'NONE', ( #3511 ), #4469, .T. ) ; +#2875 = CARTESIAN_POINT ( 'NONE', ( 10.31142208155898900, 14.90703988859849700, -66.60391823856687700 ) ) ; +#2876 = CARTESIAN_POINT ( 'NONE', ( 14.84005347613728700, 13.06163207313561600, -64.87291758736907400 ) ) ; +#2877 = AXIS2_PLACEMENT_3D ( 'NONE', #2667, #224, #3063 ) ; +#2878 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, 7.455127018922267400, 1.997595264191612600 ) ) ; +#2879 = CARTESIAN_POINT ( 'NONE', ( 9.369199999999999300, 5.000000000000000000, 16.50000000000000000 ) ) ; +#2880 = CARTESIAN_POINT ( 'NONE', ( 15.56253247006299600, -0.009352518394231974100, -26.40385705546087200 ) ) ; +#2881 = ORIENTED_EDGE ( 'NONE', *, *, #1469, .T. ) ; +#2882 = EDGE_CURVE ( 'NONE', #3218, #4601, #248, .T. ) ; +#2883 = DIRECTION ( 'NONE', ( -7.720719462163218400E-016, 0.2588190451025135200, -0.9659258262890702000 ) ) ; +#2884 = EDGE_LOOP ( 'NONE', ( #2026, #3737, #2368, #679 ) ) ; +#2885 = EDGE_CURVE ( 'NONE', #4060, #873, #2442, .T. ) ; +#2886 = CARTESIAN_POINT ( 'NONE', ( 5.874518742478511700, 13.53107372438653900, -65.46351797645701300 ) ) ; +#2887 = EDGE_LOOP ( 'NONE', ( #5268, #2632, #1252, #946, #3622 ) ) ; +#2888 = CARTESIAN_POINT ( 'NONE', ( 12.17965158746764100, 15.12298878200782300, -61.82527049330943900 ) ) ; +#2889 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9385387771134851000, -0.3451738168724909400 ) ) ; +#2890 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2224, #4254, #4666 ), + ( #2245, #5066, #2643 ), + ( #199, #3048, #617 ), + ( #3477, #1039, #3895 ), + ( #1458, #4293, #1855 ), + ( #4688, #2266, #5089 ), + ( #2670, #226, #3064 ), + ( #640, #3499, #1061 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -6.505213034913026600E-018, 0.0008947294286944596300, 0.001789458857388925800, 0.003578917714777858000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4082482904638637900, 1.000000000000000000), + ( 1.000000000000000000, 0.4217630254021380000, 1.000000000000000000), + ( 1.000000000000000000, 0.4409794646820094400, 1.000000000000000000), + ( 1.000000000000000000, 0.4858394257874690800, 1.000000000000000000), + ( 1.000000000000000000, 0.5114363594857936900, 1.000000000000000000), + ( 1.000000000000000000, 0.5921407099073861000, 1.000000000000000000), + ( 1.000000000000000000, 0.6510359085620607300, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865482400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2891 = EDGE_LOOP ( 'NONE', ( #2075, #701, #4316, #1958 ) ) ; +#2892 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2893 = ORIENTED_EDGE ( 'NONE', *, *, #3249, .F. ) ; +#2894 = ADVANCED_FACE ( 'NONE', ( #1345 ), #4339, .T. ) ; +#2895 = AXIS2_PLACEMENT_3D ( 'NONE', #1451, #4285, #1847 ) ; +#2896 = VERTEX_POINT ( 'NONE', #1883 ) ; +#2897 = ORIENTED_EDGE ( 'NONE', *, *, #3722, .F. ) ; +#2898 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.000000000000003600, 15.31390237722978900 ) ) ; +#2899 = CARTESIAN_POINT ( 'NONE', ( 6.507256278234449000E-013, 23.20180056182487500, -56.10166689033108200 ) ) ; +#2900 = ORIENTED_EDGE ( 'NONE', *, *, #4974, .F. ) ; +#2901 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 7.709269841782330900, 16.93242356500261900 ) ) ; +#2902 = CARTESIAN_POINT ( 'NONE', ( 10.24674999836168400, 10.14220578907523600, -63.52665572048145700 ) ) ; +#2903 = VECTOR ( 'NONE', #2557, 1000.000000000000000 ) ; +#2904 = CARTESIAN_POINT ( 'NONE', ( 0.4158118819527453200, 5.952739230204580100, 17.97437355675443600 ) ) ; +#2905 = ORIENTED_EDGE ( 'NONE', *, *, #1509, .F. ) ; +#2906 = VERTEX_POINT ( 'NONE', #4697 ) ; +#2907 = CARTESIAN_POINT ( 'NONE', ( 14.04481314915607900, 13.00483207941283800, -18.66539848092982000 ) ) ; +#2908 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#2909 = CARTESIAN_POINT ( 'NONE', ( 8.083199964109093500, 4.999999999999991100, -22.46941544652791100 ) ) ; +#2910 = EDGE_CURVE ( 'NONE', #4030, #29, #107, .T. ) ; +#2911 = ORIENTED_EDGE ( 'NONE', *, *, #523, .T. ) ; +#2912 = CIRCLE ( 'NONE', #2069, 100.0000000000000000 ) ; +#2913 = EDGE_CURVE ( 'NONE', #3338, #3226, #2297, .T. ) ; +#2914 = VERTEX_POINT ( 'NONE', #3940 ) ; +#2915 = CARTESIAN_POINT ( 'NONE', ( 1.612108379068569100, 21.91340726968854100, -54.03253246983545200 ) ) ; +#2916 = ADVANCED_FACE ( 'NONE', ( #3371 ), #2975, .T. ) ; +#2917 = EDGE_CURVE ( 'NONE', #806, #4551, #1090, .T. ) ; +#2918 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1515, #3949, #1909, #4738 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 3.705370968959021200E-018, 0.0008400029179392088700 ), + .UNSPECIFIED. ) ; +#2919 = CIRCLE ( 'NONE', #999, 1.000000000000000700 ) ; +#2920 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#2921 = CARTESIAN_POINT ( 'NONE', ( 9.344105898862418200, 14.88025082463642500, -66.58786809820861700 ) ) ; +#2922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8667469317226350600, -0.4987481893194180000 ) ) ; +#2923 = VECTOR ( 'NONE', #1152, 1000.000000000000000 ) ; +#2924 = AXIS2_PLACEMENT_3D ( 'NONE', #1079, #3930, #1495 ) ; +#2925 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824605200, 13.89270308066022100, -22.02776567580416500 ) ) ; +#2926 = FACE_OUTER_BOUND ( 'NONE', #3342, .T. ) ; +#2927 = EDGE_LOOP ( 'NONE', ( #4562, #1951, #1504, #94 ) ) ; +#2928 = FACE_OUTER_BOUND ( 'NONE', #4731, .T. ) ; +#2929 = AXIS2_PLACEMENT_3D ( 'NONE', #4451, #3219, #2013 ) ; +#2930 = VECTOR ( 'NONE', #2666, 1000.000000000000000 ) ; +#2931 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000400, 13.22771491430602000, -23.40969935769455300 ) ) ; +#2932 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999997300, 7.499999999999996400 ) ) ; +#2933 = CARTESIAN_POINT ( 'NONE', ( 7.719352043195184100, 15.12321172042747200, -61.82541569265112000 ) ) ; +#2934 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#2935 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2936 = CARTESIAN_POINT ( 'NONE', ( 16.83196911014638200, 3.174435829750623700, -27.62926661662134700 ) ) ; +#2937 = CARTESIAN_POINT ( 'NONE', ( 5.864856704963887800, 24.09528809209817300, -62.62517450508982400 ) ) ; +#2938 = ADVANCED_FACE ( 'NONE', ( #3256 ), #132, .T. ) ; +#2939 = ORIENTED_EDGE ( 'NONE', *, *, #2644, .F. ) ; +#2940 = ORIENTED_EDGE ( 'NONE', *, *, #4037, .T. ) ; +#2941 = EDGE_CURVE ( 'NONE', #441, #4015, #3562, .T. ) ; +#2942 = VERTEX_POINT ( 'NONE', #329 ) ; +#2943 = ORIENTED_EDGE ( 'NONE', *, *, #3335, .T. ) ; +#2944 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.96533279648316700, -53.78041229006792900 ) ) ; +#2945 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #4054 ) ) ; +#2946 = EDGE_CURVE ( 'NONE', #2459, #1829, #3108, .T. ) ; +#2947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025144700, -0.9659258262890700900 ) ) ; +#2948 = ORIENTED_EDGE ( 'NONE', *, *, #2056, .T. ) ; +#2949 = CARTESIAN_POINT ( 'NONE', ( 7.067991409383076900, 11.35541060937004500, -62.62467700858164900 ) ) ; +#2950 = ORIENTED_EDGE ( 'NONE', *, *, #1300, .F. ) ; +#2951 = CARTESIAN_POINT ( 'NONE', ( 9.715139861287772400, 15.56239798600153700, -62.05517369621063000 ) ) ; +#2952 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890699800, -0.2588190451025143600 ) ) ; +#2953 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666600, 10.93120901305857900, -55.53160033211128900 ) ) ; +#2954 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 0.4654998936809287000, -27.35715002711811300 ) ) ; +#2955 = CARTESIAN_POINT ( 'NONE', ( 11.15331807455572200, 23.54869279075368000, -64.16441223329624700 ) ) ; +#2956 = EDGE_LOOP ( 'NONE', ( #2270, #5030, #2601, #5120 ) ) ; +#2957 = EDGE_LOOP ( 'NONE', ( #479, #4928, #426, #2153 ) ) ; +#2958 = ADVANCED_FACE ( 'NONE', ( #2044 ), #5284, .T. ) ; +#2959 = CIRCLE ( 'NONE', #3757, 9.000000000000001800 ) ; +#2960 = AXIS2_PLACEMENT_3D ( 'NONE', #2873, #3690, #3291 ) ; +#2961 = EDGE_LOOP ( 'NONE', ( #3735, #312, #2950 ) ) ; +#2962 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.549839760220696100, -30.48955358190052300 ) ) ; +#2963 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338508800, 12.18129507813257800, -62.96121213358095800 ) ) ; +#2964 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -1.534074173710874100, -7.911053935975259000 ) ) ; +#2965 = VECTOR ( 'NONE', #7, 1000.000000000000000 ) ; +#2966 = CARTESIAN_POINT ( 'NONE', ( 2.443342207006336900, 3.543754424545357800, -30.54751965691298900 ) ) ; +#2967 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#2968 = ORIENTED_EDGE ( 'NONE', *, *, #1835, .T. ) ; +#2969 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999548300, 0.6399606813674745300, -28.08772375302974600 ) ) ; +#2970 = CARTESIAN_POINT ( 'NONE', ( 15.72979091828285400, 24.20781099584118600, -60.90105383358898900 ) ) ; +#2971 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.410321060555544300, -30.21984944025840000 ) ) ; +#2972 = EDGE_CURVE ( 'NONE', #2099, #2896, #949, .T. ) ; +#2973 = CIRCLE ( 'NONE', #3355, 7.499999999999999100 ) ; +#2974 = APPROVAL_DATE_TIME ( #4099, #228 ) ; +#2975 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2308, #253, #5139 ), + ( #2706, #274, #3116 ), + ( #683, #3542, #1107 ), + ( #3959, #1525, #4359 ), + ( #1920, #4749, #2329 ), + ( #5157, #2728, #293 ), + ( #3135, #706, #3564 ), + ( #1124, #3979, #1541 ), + ( #4379, #1938, #4773 ), + ( #2348, #5177, #2747 ), + ( #313, #3157, #727 ), + ( #3585, #1144, #4001 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03349566630219011400, 0.03589909137334440500, 0.03830251644449869700, 0.03950422898007584200, 0.04070594151565298800, 0.04310936658680728600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7131395890707215000, 1.000000000000000000), + ( 1.000000000000000000, 0.7181110261326604200, 1.000000000000000000), + ( 1.000000000000000000, 0.7235599925368181300, 1.000000000000000000), + ( 1.000000000000000000, 0.7351902786183044400, 1.000000000000000000), + ( 1.000000000000000000, 0.7411547935571335400, 1.000000000000000000), + ( 1.000000000000000000, 0.7500218152240935000, 1.000000000000000000), + ( 1.000000000000000000, 0.7529750436689356400, 1.000000000000000000), + ( 1.000000000000000000, 0.7587696513574392300, 1.000000000000000000), + ( 1.000000000000000000, 0.7615716444915881000, 1.000000000000000000), + ( 1.000000000000000000, 0.7696304304989997100, 1.000000000000000000), + ( 1.000000000000000000, 0.7745472719884898300, 1.000000000000000000), + ( 1.000000000000000000, 0.7787896176724197200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2976 = EDGE_CURVE ( 'NONE', #4069, #2133, #4197, .T. ) ; +#2977 = LINE ( 'NONE', #5270, #1919 ) ; +#2978 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, 7.455127018922267400, 1.997595264191612600 ) ) ; +#2979 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 18.09635858759372700, -66.49999999999997200 ) ) ; +#2980 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 23.22519872755274400, -56.85711359142337800 ) ) ; +#2981 = CIRCLE ( 'NONE', #575, 11.03553390593273800 ) ; +#2982 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999600, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#2983 = AXIS2_PLACEMENT_3D ( 'NONE', #3919, #3504, #4318 ) ; +#2984 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.954626213726290600, -27.94664268270522500 ) ) ; +#2985 = DIRECTION ( 'NONE', ( 0.6484729204542122300, 0.0000000000000000000, 0.7612377233411286000 ) ) ; +#2986 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999999800, 12.73833325550377700, -27.37885710048672600 ) ) ; +#2987 = CIRCLE ( 'NONE', #1105, 101.0000000000000100 ) ; +#2988 = ADVANCED_FACE ( 'NONE', ( #5142 ), #4096, .T. ) ; +#2989 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.76821830000685100, -53.20897961494587500 ) ) ; +#2990 = CARTESIAN_POINT ( 'NONE', ( 18.43306740024268800, 0.07946348729004744400, -26.59811686861729600 ) ) ; +#2991 = CIRCLE ( 'NONE', #860, 1.000000000000000200 ) ; +#2992 = PLANE ( 'NONE', #1964 ) ; +#2993 = ORIENTED_EDGE ( 'NONE', *, *, #502, .F. ) ; +#2994 = CARTESIAN_POINT ( 'NONE', ( 18.20925185249188900, 11.05096511385323200, -56.07721347625724200 ) ) ; +#2995 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#2996 = EDGE_LOOP ( 'NONE', ( #4825, #137, #2828, #2542 ) ) ; +#2997 = CARTESIAN_POINT ( 'NONE', ( 18.20948834146491200, 14.53744865545684400, -27.09768383800593800 ) ) ; +#2998 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 21.17132843470182000, -54.34052109592389000 ) ) ; +#2999 = CARTESIAN_POINT ( 'NONE', ( -1.878631487953289700E-013, 1.279745574402479000, -30.82888917110664200 ) ) ; +#3000 = VERTEX_POINT ( 'NONE', #3672 ) ; +#3001 = CARTESIAN_POINT ( 'NONE', ( 6.271682003150635500, 11.24788124243392900, -21.78878935736992200 ) ) ; +#3002 = CARTESIAN_POINT ( 'NONE', ( 1.103499852910804400, 10.00000000000000000, 17.67372790804952100 ) ) ; +#3003 = ORIENTED_EDGE ( 'NONE', *, *, #1364, .T. ) ; +#3004 = EDGE_CURVE ( 'NONE', #2628, #4740, #4997, .T. ) ; +#3005 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 12.73833325550376800, -27.37885710048672300 ) ) ; +#3006 = VERTEX_POINT ( 'NONE', #4087 ) ; +#3007 = EDGE_CURVE ( 'NONE', #3049, #4243, #2973, .T. ) ; +#3008 = ORIENTED_EDGE ( 'NONE', *, *, #3592, .F. ) ; +#3009 = ADVANCED_FACE ( 'NONE', ( #837 ), #1673, .T. ) ; +#3010 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5062, #4288, #4683 ), + ( #2262, #5082, #2662 ), + ( #221, #3061, #634 ), + ( #3492, #1057, #3911 ), + ( #1474, #4311, #1869 ), + ( #4701, #2280, #5104 ), + ( #2682, #239, #3080 ), + ( #651, #3514, #1075 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.001260252024227370400, 0.002592869691164280600, 0.003925487358101191100, 0.006590722691975012300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8502655191829920900, 1.000000000000000000), + ( 1.000000000000000000, 0.8412555424087786400, 1.000000000000000000), + ( 1.000000000000000000, 0.8335955397554795100, 1.000000000000000000), + ( 1.000000000000000000, 0.8202526292431466800, 1.000000000000000000), + ( 1.000000000000000000, 0.8145607669889065600, 1.000000000000000000), + ( 1.000000000000000000, 0.7995172307182572000, 1.000000000000000000), + ( 1.000000000000000000, 0.7921715668409693400, 1.000000000000000000), + ( 1.000000000000000000, 0.7860350693180033800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3011 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.358343471938285900, -26.90678312696157100 ) ) ; +#3012 = ORIENTED_EDGE ( 'NONE', *, *, #5008, .F. ) ; +#3013 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3014 = AXIS2_PLACEMENT_3D ( 'NONE', #1790, #1011, #1826 ) ; +#3015 = CARTESIAN_POINT ( 'NONE', ( 14.72857319837539000, 10.00000000000000200, 18.57268940363744700 ) ) ; +#3016 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999600, 0.4639637146298354300, -25.28576143110688800 ) ) ; +#3017 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890699800 ) ) ; +#3018 = VERTEX_POINT ( 'NONE', #867 ) ; +#3019 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 2.612651188657587800, -30.32807655698930600 ) ) ; +#3020 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#3021 = LINE ( 'NONE', #2932, #881 ) ; +#3022 = ORIENTED_EDGE ( 'NONE', *, *, #4644, .F. ) ; +#3023 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.6815524533736487800, 16.50000000855573700 ) ) ; +#3024 = ORIENTED_EDGE ( 'NONE', *, *, #1239, .T. ) ; +#3025 = AXIS2_PLACEMENT_3D ( 'NONE', #2931, #500, #3354 ) ; +#3026 = CARTESIAN_POINT ( 'NONE', ( 2.461824473058251700, 19.78571229713485000, -53.68003373877874700 ) ) ; +#3027 = CARTESIAN_POINT ( 'NONE', ( 11.10042759180819900, 20.70950525381133600, -60.58762870325472200 ) ) ; +#3028 = DIRECTION ( 'NONE', ( 5.900740830414105000E-015, 0.2588190451025136300, -0.9659258262890702000 ) ) ; +#3029 = LINE ( 'NONE', #4804, #2097 ) ; +#3030 = ORIENTED_EDGE ( 'NONE', *, *, #3727, .F. ) ; +#3031 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3032 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, -1.457153238772569400, 17.50000000000000000 ) ) ; +#3033 = AXIS2_PLACEMENT_3D ( 'NONE', #431, #1668, #847 ) ; +#3034 = FACE_OUTER_BOUND ( 'NONE', #1443, .T. ) ; +#3035 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -4.999999999999999100, 12.50000000000000000 ) ) ; +#3036 = ORIENTED_EDGE ( 'NONE', *, *, #3433, .T. ) ; +#3037 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3038 = VECTOR ( 'NONE', #792, 1000.000000000000000 ) ; +#3039 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#3040 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 18.09635858759372700, -67.49999999999997200 ) ) ; +#3041 = EDGE_CURVE ( 'NONE', #5033, #974, #700, .T. ) ; +#3042 = CARTESIAN_POINT ( 'NONE', ( 9.369199999999999300, 5.000000000000000000, 16.50000000000000000 ) ) ; +#3043 = VECTOR ( 'NONE', #3984, 1000.000000000000100 ) ; +#3044 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #240, #262, #3946, #1512 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0007559763663257831800 ), + .UNSPECIFIED. ) ; +#3045 = CARTESIAN_POINT ( 'NONE', ( 0.4249351648623951900, 3.823266477490415900, 17.96142317284925800 ) ) ; +#3046 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 6.074766565851414100, 1.627728795527428400 ) ) ; +#3047 = VECTOR ( 'NONE', #5155, 1000.000000000000000 ) ; +#3048 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 9.883721245832584000, -57.07096900477672800 ) ) ; +#3049 = VERTEX_POINT ( 'NONE', #1284 ) ; +#3050 = EDGE_CURVE ( 'NONE', #1378, #2906, #2865, .T. ) ; +#3051 = CIRCLE ( 'NONE', #2895, 9.000000000000001800 ) ; +#3052 = CARTESIAN_POINT ( 'NONE', ( 18.26309180650247300, 10.94459007232140000, -55.82018628115672200 ) ) ; +#3053 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.699674944388153300E-015, -1.000000000000000000 ) ) ; +#3054 = CARTESIAN_POINT ( 'NONE', ( 1.528962492362800200, 11.13256921172125900, -57.51112155903553000 ) ) ; +#3056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#3055 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3057 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999000, 20.93151399008783600, -53.63367624199317900 ) ) ; +#3058 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 13.40741737109299000, -20.21665475151214500 ) ) ; +#3059 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3060 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 2.949419908019178300, -29.44356370497804300 ) ) ; +#3061 = CARTESIAN_POINT ( 'NONE', ( 14.78406900999470400, 10.00000000000038500, 20.71388452956459100 ) ) ; +#3062 = CARTESIAN_POINT ( 'NONE', ( 4.091640145629421400E-014, 7.042995457297266200, 17.59920510227467400 ) ) ; +#3063 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3064 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 12.20612703168450400, -59.19018288425790100 ) ) ; +#3065 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 18.09635858759372700, -61.37627564304205000 ) ) ; +#3066 = VERTEX_POINT ( 'NONE', #1688 ) ; +#3067 = AXIS2_PLACEMENT_3D ( 'NONE', #5269, #2838, #404 ) ; +#3068 = ORIENTED_EDGE ( 'NONE', *, *, #4468, .T. ) ; +#3069 = CARTESIAN_POINT ( 'NONE', ( 2.336427791128080000, -0.4700637958139014000, -25.54710286228729600 ) ) ; +#3070 = CARTESIAN_POINT ( 'NONE', ( 2.461911958856287400, 12.80327425775188600, -27.62122022037114300 ) ) ; +#3071 = ORIENTED_EDGE ( 'NONE', *, *, #2240, .F. ) ; +#3072 = ORIENTED_EDGE ( 'NONE', *, *, #1552, .F. ) ; +#3073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#3074 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3168, #3969, #1970, #4800, #2380, #5204, #2775, #340 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.001489756288025379900, 0.002882466040375252400, 0.004275175792725125100, 0.007060595297424872300 ), + .UNSPECIFIED. ) ; +#3075 = EDGE_CURVE ( 'NONE', #994, #3349, #714, .T. ) ; +#3076 = ORIENTED_EDGE ( 'NONE', *, *, #2717, .F. ) ; +#3077 = DIRECTION ( 'NONE', ( 2.671813387426239900E-016, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#3078 = ORIENTED_EDGE ( 'NONE', *, *, #2114, .T. ) ; +#3079 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000200, 7.499999999999999100 ) ) ; +#3080 = CARTESIAN_POINT ( 'NONE', ( 16.37288819838465400, 10.00000000000000200, 17.07482144758669000 ) ) ; +#3081 = AXIS2_PLACEMENT_3D ( 'NONE', #3509, #1073, #3924 ) ; +#3082 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 12.20634732186777800, -59.19100507488770500 ) ) ; +#3083 = EDGE_CURVE ( 'NONE', #2257, #3000, #3822, .T. ) ; +#3084 = CARTESIAN_POINT ( 'NONE', ( 18.20948834146491200, 21.54954335313826900, -53.26717751723803200 ) ) ; +#3085 = CARTESIAN_POINT ( 'NONE', ( 14.57528977095315900, 13.06581165629429900, -18.90820331608211500 ) ) ; +#3086 = CARTESIAN_POINT ( 'NONE', ( 1.700533333129236500, 14.58518065357252200, -27.37635425302012800 ) ) ; +#3087 = VERTEX_POINT ( 'NONE', #708 ) ; +#3088 = DESIGN_CONTEXT ( 'detailed design', #3262, 'design' ) ; +#3089 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, 4.999999999999991100, -24.44661701239532500 ) ) ; +#3090 = AXIS2_PLACEMENT_3D ( 'NONE', #4094, #1654, #4491 ) ; +#3091 = EDGE_LOOP ( 'NONE', ( #2940, #3605, #1149, #1748 ) ) ; +#3092 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3093 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.258686208197953500, -29.95633160533156000 ) ) ; +#3094 = FACE_OUTER_BOUND ( 'NONE', #2461, .T. ) ; +#3095 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 16.26997072649155700, -27.21420724471778000 ) ) ; +#3096 = ORIENTED_EDGE ( 'NONE', *, *, #4532, .F. ) ; +#3097 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3098 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3099 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3100 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 18.23223304703364200 ) ) ; +#3101 = FACE_OUTER_BOUND ( 'NONE', #4810, .T. ) ; +#3102 = AXIS2_PLACEMENT_3D ( 'NONE', #4595, #2171, #4992 ) ; +#3103 = CARTESIAN_POINT ( 'NONE', ( 10.52920000000000100, 5.000000000000000000, 16.50000000000000000 ) ) ; +#3104 = ORIENTED_EDGE ( 'NONE', *, *, #882, .F. ) ; +#3105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#3106 = CARTESIAN_POINT ( 'NONE', ( 6.988589875337648700, 12.90402930031774200, -18.25996234381574000 ) ) ; +#3107 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 12.18129507813263500, -62.96121213358091500 ) ) ; +#3108 = CIRCLE ( 'NONE', #619, 9.267766952966360000 ) ; +#3109 = ORIENTED_EDGE ( 'NONE', *, *, #2049, .T. ) ; +#3110 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2349, #2729, #4399 ), + ( #1959, #4791, #2372 ), + ( #5193, #2765, #330 ), + ( #3181, #748, #3604 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0009110416949331676700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4082482904638607400, 1.000000000000000000), + ( 1.000000000000000000, 0.3944628615493971900, 1.000000000000000000), + ( 1.000000000000000000, 0.3869151953114902700, 1.000000000000000000), + ( 1.000000000000000000, 0.3869539162915076000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3111 = CARTESIAN_POINT ( 'NONE', ( 18.93842873849660800, 9.999999999999960900, 15.61465486670741000 ) ) ; +#3112 = AXIS2_PLACEMENT_3D ( 'NONE', #4509, #448, #1277 ) ; +#3113 = APPROVAL_PERSON_ORGANIZATION ( #4199, #228, #2051 ) ; +#3114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3115 = FACE_OUTER_BOUND ( 'NONE', #1709, .T. ) ; +#3117 = CARTESIAN_POINT ( 'NONE', ( 13.06064153315851200, -9.999999999999998200, 12.52113835432388600 ) ) ; +#3116 = CARTESIAN_POINT ( 'NONE', ( 0.07969955999238073600, 1.631190395245891000, -29.73945079322227900 ) ) ; +#3118 = CARTESIAN_POINT ( 'NONE', ( 18.55076986172928600, 10.00000000000000200, 15.43848589233077600 ) ) ; +#3119 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#3120 = EDGE_CURVE ( 'NONE', #144, #1649, #5019, .T. ) ; +#3121 = FACE_OUTER_BOUND ( 'NONE', #1460, .T. ) ; +#3122 = CARTESIAN_POINT ( 'NONE', ( 6.455432609591193600, 13.61026840981820200, -21.05223988558560300 ) ) ; +#3123 = EDGE_CURVE ( 'NONE', #1580, #2479, #3155, .T. ) ; +#3124 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 0.08428789104291420400, 16.58738360076580100 ) ) ; +#3125 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999996700, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#3126 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3127 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 10.24015223986378400, -55.71676843641289900 ) ) ; +#3128 = CARTESIAN_POINT ( 'NONE', ( 4.285237791827583500, 24.23669999368367200, -61.06625747338692600 ) ) ; +#3129 = CARTESIAN_POINT ( 'NONE', ( 1.644608853288118000, 14.48106860985407400, -26.53890932330018200 ) ) ; +#3130 = FACE_OUTER_BOUND ( 'NONE', #4222, .T. ) ; +#3131 = CARTESIAN_POINT ( 'NONE', ( 5.281972922924028400, -4.999999999999999100, 17.50000000000000000 ) ) ; +#3132 = EDGE_CURVE ( 'NONE', #994, #3254, #4886, .T. ) ; +#3133 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.053482102790352900, 17.01550799608314800 ) ) ; +#3134 = CIRCLE ( 'NONE', #1682, 1.000000000000000700 ) ; +#3136 = CARTESIAN_POINT ( 'NONE', ( 19.49449540169507600, 5.474082765431365500, 17.99271596417262100 ) ) ; +#3135 = CARTESIAN_POINT ( 'NONE', ( 3.995963039748092100, 2.327765317421843300, -26.21722129006103000 ) ) ; +#3137 = EDGE_LOOP ( 'NONE', ( #2578, #101, #4815, #1384, #4202 ) ) ; +#3138 = CARTESIAN_POINT ( 'NONE', ( 18.24860662017279400, 2.979730832327784900, -31.07961970338182300 ) ) ; +#3139 = AXIS2_PLACEMENT_3D ( 'NONE', #1171, #2299, #1582 ) ; +#3140 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.69880539835713800, -55.63909432224746600 ) ) ; +#3141 = CARTESIAN_POINT ( 'NONE', ( 8.155667249509200200, 11.06867966701266700, -21.05424734038868800 ) ) ; +#3142 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.848119713664407200, 17.66360326263354400 ) ) ; +#3143 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002900, 0.9419352036700504600, -25.37244181637523600 ) ) ; +#3144 = VERTEX_POINT ( 'NONE', #4019 ) ; +#3145 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, 5.040811046037322100, 1.350681248983548000 ) ) ; +#3146 = CARTESIAN_POINT ( 'NONE', ( 2.449199999838654700, 11.65531298752031700, -55.60010436059684500 ) ) ; +#3147 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.38258541754341900, -23.98768400083539700 ) ) ; +#3148 = ORIENTED_EDGE ( 'NONE', *, *, #440, .T. ) ; +#3149 = CARTESIAN_POINT ( 'NONE', ( 10.72725535734118600, -9.999999999999998200, 12.57183269374850100 ) ) ; +#3150 = CARTESIAN_POINT ( 'NONE', ( 7.090985206292630000, 21.01802675634739300, -60.01116848328747700 ) ) ; +#3151 = AXIS2_PLACEMENT_3D ( 'NONE', #3046, #197, #3851 ) ; +#3152 = ORIENTED_EDGE ( 'NONE', *, *, #2202, .T. ) ; +#3153 = ORIENTED_EDGE ( 'NONE', *, *, #914, .T. ) ; +#3154 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 7.709269841782330000, 16.93242356500261900 ) ) ; +#3155 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4003, #1560, #2766, #331, #3182, #750 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.001849932018993619500, 0.002968079293572013300, 0.004086226568150409600 ), + .UNSPECIFIED. ) ; +#3156 = ORIENTED_EDGE ( 'NONE', *, *, #3812, .T. ) ; +#3158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3157 = CARTESIAN_POINT ( 'NONE', ( 5.469572034425086200, -0.5107193849178800500, -25.44068292925066600 ) ) ; +#3159 = ORIENTED_EDGE ( 'NONE', *, *, #2313, .F. ) ; +#3160 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.96533279648316700, -53.78041229006792900 ) ) ; +#3161 = EDGE_CURVE ( 'NONE', #1577, #1342, #1775, .T. ) ; +#3162 = CARTESIAN_POINT ( 'NONE', ( 10.55126992483627300, 12.80486687571674200, -17.85295801650892500 ) ) ; +#3163 = CARTESIAN_POINT ( 'NONE', ( 19.43060751337938500, 7.067894561046710300, 17.89564910937172800 ) ) ; +#3164 = VERTEX_POINT ( 'NONE', #5215 ) ; +#3165 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 8.969250877858083700, 15.68688548806215800 ) ) ; +#3166 = AXIS2_PLACEMENT_3D ( 'NONE', #2605, #1030, #3887 ) ; +#3167 = CARTESIAN_POINT ( 'NONE', ( 2.549563145622765400, 8.195672121967824400, 19.44880225665896800 ) ) ; +#3168 = CARTESIAN_POINT ( 'NONE', ( 5.500377052683337100, 8.614757265557774000, 21.76776695296905800 ) ) ; +#3169 = EDGE_CURVE ( 'NONE', #5054, #5033, #1669, .T. ) ; +#3170 = CARTESIAN_POINT ( 'NONE', ( 14.61642707707597200, -9.999999999999998200, 17.50000000000000000 ) ) ; +#3171 = CARTESIAN_POINT ( 'NONE', ( 9.219888568227704100, 25.69570780729067400, -59.35642693664861700 ) ) ; +#3172 = VECTOR ( 'NONE', #3341, 1000.000000000000000 ) ; +#3173 = ORIENTED_EDGE ( 'NONE', *, *, #1246, .T. ) ; +#3174 = ORIENTED_EDGE ( 'NONE', *, *, #3687, .F. ) ; +#3175 = CARTESIAN_POINT ( 'NONE', ( 18.29300028884715300, 11.12072037432946900, -56.98072318828140200 ) ) ; +#3176 = AXIS2_PLACEMENT_3D ( 'NONE', #3020, #3866, #193 ) ; +#3177 = FACE_OUTER_BOUND ( 'NONE', #411, .T. ) ; +#3178 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -4.999999999999999100, 12.50000000000000000 ) ) ; +#3179 = VERTEX_POINT ( 'NONE', #1593 ) ; +#3181 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666667000, 3.023894846702043000, -31.05974356099692100 ) ) ; +#3180 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 13.96819975629100700, -27.83096491734441700 ) ) ; +#3182 = CARTESIAN_POINT ( 'NONE', ( 2.606739593586653300, 10.00000000000000400, 16.20859470210911400 ) ) ; +#3183 = LINE ( 'NONE', #4951, #4262 ) ; +#3184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3185 = ORIENTED_EDGE ( 'NONE', *, *, #4801, .F. ) ; +#3186 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4987, #2954, #2573 ), + ( #121, #2969, #537 ), + ( #3391, #955, #3806 ), + ( #1375, #4210, #1771 ), + ( #4605, #2180, #5003 ), + ( #2661, #219, #3060 ), + ( #633, #3491, #1055 ), + ( #3910, #1473, #4310 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001796674598773857200, 0.002695011898160786000, 0.003593349197547714300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811879587800, 1.000000000000000000), + ( 1.000000000000000000, 0.6507963962005570700, 1.000000000000000000), + ( 1.000000000000000000, 0.5919065384186839000, 1.000000000000000000), + ( 1.000000000000000000, 0.5112352069398877800, 1.000000000000000000), + ( 1.000000000000000000, 0.4856736746328986800, 1.000000000000000000), + ( 1.000000000000000000, 0.4409014066078812400, 1.000000000000000000), + ( 1.000000000000000000, 0.4217338484090259500, 1.000000000000000000), + ( 1.000000000000000000, 0.4082482904638637900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3187 = DIRECTION ( 'NONE', ( -0.7276068751089961300, -1.009757382026960100E-015, 0.6859943405700383900 ) ) ; +#3188 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 1.734723475976807600E-016 ) ) ; +#3189 = CARTESIAN_POINT ( 'NONE', ( 5.504505771247975700, 10.00000000000000400, 20.97322750453429700 ) ) ; +#3190 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999500, 7.455127018922267400, 1.997595264191612600 ) ) ; +#3191 = VECTOR ( 'NONE', #1601, 1000.000000000000100 ) ; +#3192 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.96533279648315700, -53.78041229006787900 ) ) ; +#3193 = CARTESIAN_POINT ( 'NONE', ( 13.02604764182589700, 7.500000000000003600, 20.00000000000000400 ) ) ; +#3194 = CARTESIAN_POINT ( 'NONE', ( 9.644888411783968600, 23.47179681049486200, -64.30964638652756100 ) ) ; +#3195 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3487, #626, #1467, #4303 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009065014181572064400 ), + .UNSPECIFIED. ) ; +#3196 = CIRCLE ( 'NONE', #5047, 5.000000000000000000 ) ; +#3197 = CIRCLE ( 'NONE', #770, 1.000000000000000700 ) ; +#3198 = EDGE_LOOP ( 'NONE', ( #4670, #3288, #2436, #4450 ) ) ; +#3199 = CARTESIAN_POINT ( 'NONE', ( 17.35132560530105300, 4.008546980235728100, -29.10639981074124400 ) ) ; +#3200 = EDGE_CURVE ( 'NONE', #2145, #2700, #2731, .T. ) ; +#3201 = CARTESIAN_POINT ( 'NONE', ( 4.282351814247023800, 2.127870689066560400, -25.89474162400634000 ) ) ; +#3202 = VECTOR ( 'NONE', #4227, 999.9999999999998900 ) ; +#3203 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4205, #1367, #3799, #4599, #2177, #4996, #2584, #128 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001870633568756196700, 0.002805950353134291100, 0.003741267137512385100 ), + .UNSPECIFIED. ) ; +#3204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890669800, -0.2588190451025260700 ) ) ; +#3205 = DIRECTION ( 'NONE', ( 1.795917894276922800E-016, 0.2588190451025136300, -0.9659258262890702000 ) ) ; +#3206 = ADVANCED_FACE ( 'NONE', ( #3705 ), #555, .T. ) ; +#3207 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000099700, 23.06476720047597700, -53.25938711883651400 ) ) ; +#3208 = EDGE_CURVE ( 'NONE', #4426, #4616, #1546, .T. ) ; +#3209 = FACE_OUTER_BOUND ( 'NONE', #991, .T. ) ; +#3210 = EDGE_CURVE ( 'NONE', #2703, #144, #1279, .T. ) ; +#3211 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3212 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333335000, 14.58456276205014700, -27.37404825123918800 ) ) ; +#3213 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999500, 23.04549627076574200, -60.05015819760570400 ) ) ; +#3214 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -11.59115779176004500, -61.56645032909980800 ) ) ; +#3215 = CARTESIAN_POINT ( 'NONE', ( 11.53059707582970400, 20.77521156695462100, -60.48752588501962900 ) ) ; +#3216 = ORIENTED_EDGE ( 'NONE', *, *, #2579, .T. ) ; +#3217 = CARTESIAN_POINT ( 'NONE', ( 17.88684928011773000, -0.2801026181606842700, -25.90746340237796700 ) ) ; +#3218 = VERTEX_POINT ( 'NONE', #4042 ) ; +#3219 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3220 = VERTEX_POINT ( 'NONE', #389 ) ; +#3221 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.038302160953083600, 17.19569460786983900 ) ) ; +#3222 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#3223 = VERTEX_POINT ( 'NONE', #3239 ) ; +#3224 = AXIS2_PLACEMENT_3D ( 'NONE', #2234, #5056, #2634 ) ; +#3225 = CARTESIAN_POINT ( 'NONE', ( 18.59387173425265500, 22.77424811645621400, -55.62092065558439900 ) ) ; +#3226 = VERTEX_POINT ( 'NONE', #802 ) ; +#3227 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3228 = CARTESIAN_POINT ( 'NONE', ( 18.38337656514307700, 22.23723965244436900, -54.62352101113514600 ) ) ; +#3229 = CARTESIAN_POINT ( 'NONE', ( 1.144831032017093600, 11.23557865969488000, -59.43175041041902800 ) ) ; +#3230 = ORIENTED_EDGE ( 'NONE', *, *, #2882, .F. ) ; +#3231 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#3232 = CARTESIAN_POINT ( 'NONE', ( 12.03079041082848000, 24.91658097274147100, -59.29795640803627100 ) ) ; +#3233 = VERTEX_POINT ( 'NONE', #2823 ) ; +#3234 = ADVANCED_FACE ( 'NONE', ( #4627 ), #1406, .F. ) ; +#3235 = AXIS2_PLACEMENT_3D ( 'NONE', #3065, #269, #3535 ) ; +#3236 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3019, #173, #3865, #1430, #4264, #1824, #4657, #2235 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0009339848447094483400, 0.001867969689418897100, 0.003735939378837795100 ), + .UNSPECIFIED. ) ; +#3237 = ORIENTED_EDGE ( 'NONE', *, *, #4080, .F. ) ; +#3238 = CARTESIAN_POINT ( 'NONE', ( 14.61642707707597200, -4.999999999999998200, 17.50000000000000000 ) ) ; +#3239 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 19.65596328590102400, -53.19380947054323600 ) ) ; +#3240 = EDGE_CURVE ( 'NONE', #4930, #605, #2491, .T. ) ; +#3241 = EDGE_LOOP ( 'NONE', ( #129, #4084, #2523, #4225 ) ) ; +#3242 = CARTESIAN_POINT ( 'NONE', ( 13.11843118059066700, 7.500000000000003600, 22.50000000000000400 ) ) ; +#3243 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8928435782533390400, -0.4503669001733740000 ) ) ; +#3245 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -1.457153238772571200, 17.50000000000000000 ) ) ; +#3246 = VECTOR ( 'NONE', #1743, 1000.000000000000000 ) ; +#3247 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3248 = DIRECTION ( 'NONE', ( -5.377642775528098800E-015, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#3249 = EDGE_CURVE ( 'NONE', #2193, #3763, #3581, .T. ) ; +#3250 = ORIENTED_EDGE ( 'NONE', *, *, #115, .F. ) ; +#3251 = CARTESIAN_POINT ( 'NONE', ( 2.299079351079519600E-014, 9.960747302178045700, 15.60882385647933300 ) ) ; +#3252 = CARTESIAN_POINT ( 'NONE', ( 15.61308881116201700, 24.23660743783358700, -61.06621780332843500 ) ) ; +#3253 = FACE_OUTER_BOUND ( 'NONE', #4753, .T. ) ; +#3254 = VERTEX_POINT ( 'NONE', #822 ) ; +#3255 = VERTEX_POINT ( 'NONE', #1237 ) ; +#3256 = FACE_OUTER_BOUND ( 'NONE', #3091, .T. ) ; +#3258 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, 16.50000000000000000 ) ) ; +#3257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890698700 ) ) ; +#3259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3260 = ADVANCED_FACE ( 'NONE', ( #445 ), #1282, .T. ) ; +#3261 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#3262 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#3263 = FACE_OUTER_BOUND ( 'NONE', #4911, .T. ) ; +#3264 = CARTESIAN_POINT ( 'NONE', ( 1.343187522850509500, 14.42668868276312500, -24.65898416769765700 ) ) ; +#3265 = CARTESIAN_POINT ( 'NONE', ( 19.45670433698693500, 10.00000000000000200, 17.48022600617620300 ) ) ; +#3266 = EDGE_LOOP ( 'NONE', ( #4375, #620, #916, #4496 ) ) ; +#3267 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 0.08428789147962893700, 16.58738359687087200 ) ) ; +#3268 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824605200, 11.47788851493754000, -22.67481328856045100 ) ) ; +#3269 = CIRCLE ( 'NONE', #3706, 0.9999999999999998900 ) ; +#3270 = CARTESIAN_POINT ( 'NONE', ( 0.6887668887581583900, 9.215751637415539900, 17.17593602343674800 ) ) ; +#3271 = CIRCLE ( 'NONE', #4188, 1.000000000000000200 ) ; +#3272 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2738, #1114, #282, #301 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0007559763663258431400 ), + .UNSPECIFIED. ) ; +#3273 = EDGE_CURVE ( 'NONE', #5113, #1381, #2367, .T. ) ; +#3274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#3275 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890699800, -0.2588190451025145200 ) ) ; +#3276 = CIRCLE ( 'NONE', #4508, 2.500000000000000000 ) ; +#3277 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#3278 = EDGE_CURVE ( 'NONE', #4764, #873, #320, .T. ) ; +#3279 = CARTESIAN_POINT ( 'NONE', ( 15.04941742067592100, 12.94181909797820200, -64.69238729560893800 ) ) ; +#3280 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824611500, 11.69600936856542400, -61.15010120928891300 ) ) ; +#3281 = ORIENTED_EDGE ( 'NONE', *, *, #4914, .T. ) ; +#3282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3283 = ADVANCED_FACE ( 'NONE', ( #169 ), #4521, .T. ) ; +#3284 = CARTESIAN_POINT ( 'NONE', ( 4.177198879666017100, 10.00000000000000400, 17.68103530393915400 ) ) ; +#3285 = AXIS2_PLACEMENT_3D ( 'NONE', #1977, #4808, #2385 ) ; +#3286 = ORIENTED_EDGE ( 'NONE', *, *, #4861, .F. ) ; +#3287 = VERTEX_POINT ( 'NONE', #3709 ) ; +#3288 = ORIENTED_EDGE ( 'NONE', *, *, #1578, .T. ) ; +#3289 = CARTESIAN_POINT ( 'NONE', ( 18.36943750763724400, 14.45614323750450600, -25.66674532605818400 ) ) ; +#3290 = ORIENTED_EDGE ( 'NONE', *, *, #4468, .F. ) ; +#3291 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3292 = CARTESIAN_POINT ( 'NONE', ( 9.608036124314546500, 14.89924800990020300, -66.59919827861168100 ) ) ; +#3293 = ORIENTED_EDGE ( 'NONE', *, *, #796, .F. ) ; +#3294 = CARTESIAN_POINT ( 'NONE', ( 12.82709823155439300, 11.35470363728900800, -62.62633499651860800 ) ) ; +#3295 = VERTEX_POINT ( 'NONE', #2048 ) ; +#3296 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999800, -8.074441630149920000, -13.39944000404295300 ) ) ; +#3297 = CARTESIAN_POINT ( 'NONE', ( 14.39802294731750400, 8.614757265557617700, 21.76776695296850800 ) ) ; +#3298 = CARTESIAN_POINT ( 'NONE', ( 16.24007984669061200, -1.092541982358257800, -24.38977345621150400 ) ) ; +#3299 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999600, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#3300 = VERTEX_POINT ( 'NONE', #853 ) ; +#3301 = LINE ( 'NONE', #3743, #1147 ) ; +#3302 = VERTEX_POINT ( 'NONE', #1677 ) ; +#3303 = EDGE_LOOP ( 'NONE', ( #4623, #3078, #595, #317 ) ) ; +#3304 = EDGE_CURVE ( 'NONE', #2425, #4513, #4402, .T. ) ; +#3305 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.298510400299580200E-032, -1.325001034533938900E-016 ) ) ; +#3306 = ADVANCED_FACE ( 'NONE', ( #2599 ), #2078, .T. ) ; +#3307 = EDGE_CURVE ( 'NONE', #1702, #231, #1162, .T. ) ; +#3308 = LINE ( 'NONE', #1102, #1007 ) ; +#3309 = VERTEX_POINT ( 'NONE', #1285 ) ; +#3310 = CARTESIAN_POINT ( 'NONE', ( 5.100946490362726000, 13.08704321015294900, -64.90677871965162600 ) ) ; +#3311 = CARTESIAN_POINT ( 'NONE', ( 12.92313544998987900, 14.11614427144001400, -66.03307317312962300 ) ) ; +#3312 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#3313 = AXIS2_PLACEMENT_3D ( 'NONE', #2265, #5088, #2669 ) ; +#3314 = VECTOR ( 'NONE', #4529, 1000.000000000000000 ) ; +#3315 = CARTESIAN_POINT ( 'NONE', ( 11.52392424423277000, 13.42223856921507300, -20.38213016125908800 ) ) ; +#3316 = ORIENTED_EDGE ( 'NONE', *, *, #4801, .T. ) ; +#3317 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.65446821274872700, -55.06985442120483800 ) ) ; +#3318 = CIRCLE ( 'NONE', #4389, 0.9999999999999990000 ) ; +#3319 = VECTOR ( 'NONE', #3077, 1000.000000000000000 ) ; +#3320 = AXIS2_PLACEMENT_3D ( 'NONE', #1444, #203, #3877 ) ; +#3321 = LINE ( 'NONE', #4342, #2111 ) ; +#3322 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3323 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 21.88372034425324100, -55.98249705429381600 ) ) ; +#3324 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1477, #4314, #676, #3532 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009110416949331978100 ), + .UNSPECIFIED. ) ; +#3325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1572006963834506900, -0.9875666767649453600 ) ) ; +#3326 = CARTESIAN_POINT ( 'NONE', ( 10.40477654196733300, 15.54689984922166500, -62.04866568792925800 ) ) ; +#3327 = FACE_OUTER_BOUND ( 'NONE', #3824, .T. ) ; +#3328 = CARTESIAN_POINT ( 'NONE', ( 0.4039045983049319200, 5.000000000027274200, 17.99271596417261800 ) ) ; +#3329 = CARTESIAN_POINT ( 'NONE', ( 13.02090986178978600, 11.17152652181175100, -21.48144756899978700 ) ) ; +#3330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3331 = DIRECTION ( 'NONE', ( 0.1006687319876456200, 0.2575042443533943600, -0.9610189230915211500 ) ) ; +#3332 = LINE ( 'NONE', #3533, #1180 ) ; +#3333 = ADVANCED_FACE ( 'NONE', ( #3435 ), #3725, .T. ) ; +#3334 = ORIENTED_EDGE ( 'NONE', *, *, #1910, .F. ) ; +#3335 = EDGE_CURVE ( 'NONE', #2257, #441, #3183, .T. ) ; +#3336 = CARTESIAN_POINT ( 'NONE', ( 3.998631798917224700E-012, 23.06476672741933200, -53.25923841291916000 ) ) ; +#3337 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3338 = VERTEX_POINT ( 'NONE', #2539 ) ; +#3339 = AXIS2_PLACEMENT_3D ( 'NONE', #5257, #3184, #5276 ) ; +#3340 = EDGE_CURVE ( 'NONE', #3414, #5265, #2101, .T. ) ; +#3341 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3342 = EDGE_LOOP ( 'NONE', ( #294, #5252, #1215, #2205 ) ) ; +#3343 = CARTESIAN_POINT ( 'NONE', ( 9.652466836688097000, 10.14140757904670700, -63.52682215106306500 ) ) ; +#3344 = ORIENTED_EDGE ( 'NONE', *, *, #1736, .F. ) ; +#3345 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3346 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.93424423647692300, -28.10801246388829400 ) ) ; +#3347 = CARTESIAN_POINT ( 'NONE', ( 3.727646150763472800, 24.16294663273443200, -60.35683641825281900 ) ) ; +#3348 = ORIENTED_EDGE ( 'NONE', *, *, #4338, .T. ) ; +#3349 = VERTEX_POINT ( 'NONE', #3723 ) ; +#3350 = EDGE_LOOP ( 'NONE', ( #281, #4192, #1586, #4374 ) ) ; +#3351 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025146900 ) ) ; +#3352 = ADVANCED_FACE ( 'NONE', ( #3034 ), #895, .T. ) ; +#3353 = EDGE_LOOP ( 'NONE', ( #603, #1976, #4874, #4431 ) ) ; +#3354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890696400, -0.2588190451025159100 ) ) ; +#3355 = AXIS2_PLACEMENT_3D ( 'NONE', #2855, #420, #3274 ) ; +#3356 = DIRECTION ( 'NONE', ( -1.325001034533938900E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3357 = CARTESIAN_POINT ( 'NONE', ( 6.976069390898468100, 14.11654987461211500, -66.03342625220089700 ) ) ; +#3358 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.82641050395610800, -27.24335067068118100 ) ) ; +#3359 = EDGE_LOOP ( 'NONE', ( #4135, #823, #350, #2650 ) ) ; +#3360 = ORIENTED_EDGE ( 'NONE', *, *, #3368, .F. ) ; +#3361 = PLANE ( 'NONE', #75 ) ; +#3362 = CARTESIAN_POINT ( 'NONE', ( 16.42512223775726100, 2.741240822848855600, -26.89392079468229800 ) ) ; +#3363 = CARTESIAN_POINT ( 'NONE', ( 6.691299728965375900, 23.93240333543846900, -63.24055130430121400 ) ) ; +#3364 = CIRCLE ( 'NONE', #12, 0.9999999999999997800 ) ; +#3365 = EDGE_CURVE ( 'NONE', #1875, #3087, #1986, .T. ) ; +#3366 = VERTEX_POINT ( 'NONE', #1331 ) ; +#3367 = FACE_OUTER_BOUND ( 'NONE', #3794, .T. ) ; +#3368 = EDGE_CURVE ( 'NONE', #231, #5265, #5209, .T. ) ; +#3369 = ORIENTED_EDGE ( 'NONE', *, *, #3631, .T. ) ; +#3370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025126300, 0.9659258262890706400 ) ) ; +#3371 = FACE_OUTER_BOUND ( 'NONE', #481, .T. ) ; +#3372 = CARTESIAN_POINT ( 'NONE', ( 6.279918297093232100, 14.55187805460332700, -61.33732553765891300 ) ) ; +#3373 = CARTESIAN_POINT ( 'NONE', ( 10.87809885388529300, 15.49448300309937000, -62.02783827795727900 ) ) ; +#3374 = LOCAL_TIME ( 15, 6, 45.00000000000000000, #4472 ) ; +#3375 = AXIS2_PLACEMENT_3D ( 'NONE', #2863, #430, #3282 ) ; +#3376 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.22771491430602000, -23.40969935769455300 ) ) ; +#3377 = DIRECTION ( 'NONE', ( 0.7071067811865441300, 8.659560562354892200E-017, -0.7071067811865507900 ) ) ; +#3378 = CYLINDRICAL_SURFACE ( 'NONE', #92, 5.000000000000000000 ) ; +#3379 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 10.50070209071101600, -56.68915371767928200 ) ) ; +#3380 = CARTESIAN_POINT ( 'NONE', ( 11.65415824272018100, 23.62236945596304600, -64.01569684127719000 ) ) ; +#3381 = ADVANCED_FACE ( 'NONE', ( #2219 ), #1816, .T. ) ; +#3382 = CIRCLE ( 'NONE', #3415, 1.000000000000000700 ) ; +#3383 = AXIS2_PLACEMENT_3D ( 'NONE', #3398, #962, #3815 ) ; +#3384 = VECTOR ( 'NONE', #830, 1000.000000000000000 ) ; +#3385 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666667000, 6.764070245727470600, 1.812427159890014100 ) ) ; +#3386 = CARTESIAN_POINT ( 'NONE', ( 1.700533332995283900, 2.909425343491048200, -30.80539678327431100 ) ) ; +#3387 = ORIENTED_EDGE ( 'NONE', *, *, #2240, .T. ) ; +#3388 = AXIS2_PLACEMENT_3D ( 'NONE', #877, #3734, #1295 ) ; +#3389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890700900, -0.2588190451025141900 ) ) ; +#3390 = CARTESIAN_POINT ( 'NONE', ( 2.461816871197756400, 4.414091949715825100, -29.87006775781367600 ) ) ; +#3391 = CARTESIAN_POINT ( 'NONE', ( 18.59332193053066000, 1.150128975418496200, -28.47207554662355700 ) ) ; +#3392 = CARTESIAN_POINT ( 'NONE', ( 16.36741909521720100, 24.08708676271306000, -60.07372352907745500 ) ) ; +#3393 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 18.09635858759372700, -61.37627564304205000 ) ) ; +#3394 = CARTESIAN_POINT ( 'NONE', ( 1.635308817895067200, 14.71716567260399900, -27.63028010490991400 ) ) ; +#3395 = ORIENTED_EDGE ( 'NONE', *, *, #3889, .T. ) ; +#3396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#3397 = EDGE_CURVE ( 'NONE', #3220, #2210, #4034, .T. ) ; +#3398 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 4.227738737508570200, -29.39871417784500500 ) ) ; +#3399 = EDGE_CURVE ( 'NONE', #4545, #590, #1842, .T. ) ; +#3400 = EDGE_LOOP ( 'NONE', ( #3671, #2290, #743, #4596, #4334 ) ) ; +#3401 = ORIENTED_EDGE ( 'NONE', *, *, #1132, .T. ) ; +#3402 = ADVANCED_FACE ( 'NONE', ( #1014 ), #880, .T. ) ; +#3403 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3404 = EDGE_CURVE ( 'NONE', #2222, #3018, #3892, .T. ) ; +#3405 = CARTESIAN_POINT ( 'NONE', ( 1.461106922425176700, 22.38895482122908100, -54.89302191930300300 ) ) ; +#3406 = ORIENTED_EDGE ( 'NONE', *, *, #4648, .T. ) ; +#3407 = ORIENTED_EDGE ( 'NONE', *, *, #1652, .T. ) ; +#3408 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 13.96819975629100900, -27.83096491734441000 ) ) ; +#3409 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, 4.999999999999990200, -22.46941544652791100 ) ) ; +#3410 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -7.266997467134924400, -12.80949600363866200 ) ) ; +#3411 = EDGE_LOOP ( 'NONE', ( #4263, #2583 ) ) ; +#3412 = CARTESIAN_POINT ( 'NONE', ( 1.305078069470422500, 1.150128975424469500, -28.47207554663215500 ) ) ; +#3413 = PLANE ( 'NONE', #979 ) ; +#3414 = VERTEX_POINT ( 'NONE', #2243 ) ; +#3415 = AXIS2_PLACEMENT_3D ( 'NONE', #1188, #4047, #1600 ) ; +#3416 = CARTESIAN_POINT ( 'NONE', ( 1.700533333275656000, 21.45154526842335900, -53.00197585949258900 ) ) ; +#3417 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999255900, 0.4654998936782570600, -27.35715002712167600 ) ) ; +#3418 = ORIENTED_EDGE ( 'NONE', *, *, #496, .T. ) ; +#3419 = CYLINDRICAL_SURFACE ( 'NONE', #263, 4.999999999999997300 ) ; +#3420 = AXIS2_PLACEMENT_3D ( 'NONE', #4332, #1892, #4720 ) ; +#3421 = ORIENTED_EDGE ( 'NONE', *, *, #2819, .F. ) ; +#3422 = ORIENTED_EDGE ( 'NONE', *, *, #4181, .F. ) ; +#3423 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.76229753970789100, -55.93449070602472500 ) ) ; +#3424 = CARTESIAN_POINT ( 'NONE', ( 19.21284078236720200, 9.199932192440789100, 17.19109984160510200 ) ) ; +#3425 = CIRCLE ( 'NONE', #2128, 1.000000000000000900 ) ; +#3426 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 13.14722090442170600, -62.70239308847840200 ) ) ; +#3427 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -4.999999999999999100, 12.50000000000000000 ) ) ; +#3428 = ORIENTED_EDGE ( 'NONE', *, *, #2049, .F. ) ; +#3429 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.258686208197964600, -29.95633160533155200 ) ) ; +#3430 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999995600, -9.765541840161246900E-016 ) ) ; +#3431 = CARTESIAN_POINT ( 'NONE', ( 6.875813802378163900, 11.17449376812157200, -21.49297331997308200 ) ) ; +#3432 = ADVANCED_FACE ( 'NONE', ( #4941 ), #4835, .T. ) ; +#3433 = EDGE_CURVE ( 'NONE', #5033, #153, #622, .T. ) ; +#3434 = CARTESIAN_POINT ( 'NONE', ( 1.678396981082469700, 10.00000000000000200, 15.59672861264879800 ) ) ; +#3435 = FACE_OUTER_BOUND ( 'NONE', #2996, .T. ) ; +#3436 = DIRECTION ( 'NONE', ( 7.132977232893779100E-015, -0.1703400944239177300, 0.9853853318533064600 ) ) ; +#3437 = VERTEX_POINT ( 'NONE', #4687 ) ; +#3438 = AXIS2_PLACEMENT_3D ( 'NONE', #3489, #1052, #3907 ) ; +#3439 = EDGE_CURVE ( 'NONE', #4554, #3483, #2802, .T. ) ; +#3440 = FACE_OUTER_BOUND ( 'NONE', #2887, .T. ) ; +#3441 = CARTESIAN_POINT ( 'NONE', ( 2.487300000000001200, 4.292876200220353800, -29.64181049816156500 ) ) ; +#3442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3443 = TOROIDAL_SURFACE ( 'NONE', #4256, 3.964466094067294700, 2.500000000000000000 ) ; +#3444 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -88.81885793164890700, -72.39384004447242700 ) ) ; +#3445 = CARTESIAN_POINT ( 'NONE', ( 16.37288544153116700, 10.00000000000000200, 17.07482404617934800 ) ) ; +#3446 = VECTOR ( 'NONE', #1485, 1000.000000000000000 ) ; +#3447 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999800, -0.4184821099441981000, -24.85318660395793000 ) ) ; +#3448 = AXIS2_PLACEMENT_3D ( 'NONE', #1828, #4661, #2241 ) ; +#3449 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3450 = PLANE ( 'NONE', #3166 ) ; +#3451 = LINE ( 'NONE', #4191, #2382 ) ; +#3452 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.62051269293463600, -55.34690196774872100 ) ) ; +#3453 = CARTESIAN_POINT ( 'NONE', ( -4.336109267541215200E-014, -0.04610471944010703600, 17.38587924348293600 ) ) ; +#3454 = CARTESIAN_POINT ( 'NONE', ( 1.642823702689755600, 21.58966866263358100, -53.25662396817715200 ) ) ; +#3455 = CARTESIAN_POINT ( 'NONE', ( 10.41367478374202600, 20.64092890584003500, -60.68321887616687600 ) ) ; +#3456 = CARTESIAN_POINT ( 'NONE', ( 1.211465521467868900, 8.089255650988798500, 18.23223304703364200 ) ) ; +#3457 = VECTOR ( 'NONE', #3894, 1000.000000000000100 ) ; +#3458 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -9.184850993605144000E-016, 12.49999999999999600 ) ) ; +#3459 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#3460 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.65446821274873000, -55.06985442120483000 ) ) ; +#3461 = ORIENTED_EDGE ( 'NONE', *, *, #1617, .F. ) ; +#3462 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#3463 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3464 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -1.457153238772571200, 16.50000000000000000 ) ) ; +#3465 = ORIENTED_EDGE ( 'NONE', *, *, #3974, .T. ) ; +#3466 = EDGE_CURVE ( 'NONE', #1263, #1128, #2912, .T. ) ; +#3467 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 18.23223304703364200 ) ) ; +#3468 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 20.00000000000000000 ) ) ; +#3469 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3470 = ORIENTED_EDGE ( 'NONE', *, *, #4758, .F. ) ; +#3471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890700900 ) ) ; +#3472 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.894746960652293300, 17.14599244276498200 ) ) ; +#3473 = ORIENTED_EDGE ( 'NONE', *, *, #3365, .F. ) ; +#3474 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3475 = EDGE_CURVE ( 'NONE', #2210, #211, #5202, .T. ) ; +#3476 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3477 = CARTESIAN_POINT ( 'NONE', ( 18.36947368605633500, 11.13257223076926800, -57.51134744565597100 ) ) ; +#3478 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ; +#3479 = EDGE_CURVE ( 'NONE', #2512, #806, #1608, .T. ) ; +#3480 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#3481 = ORIENTED_EDGE ( 'NONE', *, *, #44, .F. ) ; +#3482 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999500, 12.91551665643369000, -56.04210610492301500 ) ) ; +#3483 = VERTEX_POINT ( 'NONE', #3517 ) ; +#3484 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.72006612119838000, -55.31466914835659300 ) ) ; +#3485 = AXIS2_PLACEMENT_3D ( 'NONE', #4313, #1870, #4703 ) ; +#3486 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.97718918961494300, -57.41405986009947800 ) ) ; +#3487 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.96819975629100700, -27.83096491734441700 ) ) ; +#3488 = EDGE_LOOP ( 'NONE', ( #4396, #4182, #2629, #3281, #1903 ) ) ; +#3489 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 22.25927290126367100, -57.11593263652589100 ) ) ; +#3490 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#3491 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 1.279745574417133300, -30.82888917110523900 ) ) ; +#3492 = CARTESIAN_POINT ( 'NONE', ( 15.93872843601532500, 8.363849336721781200, 20.63470990674354900 ) ) ; +#3493 = EDGE_LOOP ( 'NONE', ( #393, #2783 ) ) ; +#3494 = CARTESIAN_POINT ( 'NONE', ( 0.5391630027160806400, 7.848783069637188500, 17.80887397500187300 ) ) ; +#3495 = ORIENTED_EDGE ( 'NONE', *, *, #4328, .F. ) ; +#3496 = AXIS2_PLACEMENT_3D ( 'NONE', #4635, #3017, #586 ) ; +#3497 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.81382236340609800, -56.23255212013580700 ) ) ; +#3498 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, 5.000000000000000000, 22.50000000000004300 ) ) ; +#3499 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000600, 11.39507170863056600, -60.02698657250109400 ) ) ; +#3500 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000001100, 11.62051269293463400, -55.34690196774871400 ) ) ; +#3501 = VECTOR ( 'NONE', #3750, 1000.000000000000000 ) ; +#3502 = EDGE_LOOP ( 'NONE', ( #4395, #2836, #3465, #43, #3796, #1312, #4144, #2476 ) ) ; +#3503 = CARTESIAN_POINT ( 'NONE', ( 4.097068091895338600, -1.264428118684162200, -24.07751880715203900 ) ) ; +#3504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#3505 = CIRCLE ( 'NONE', #4239, 1.000000000000000900 ) ; +#3506 = ORIENTED_EDGE ( 'NONE', *, *, #3083, .F. ) ; +#3508 = CARTESIAN_POINT ( 'NONE', ( 0.9597095944821684200, 10.00000000000000000, 15.61662090189429900 ) ) ; +#3507 = CARTESIAN_POINT ( 'NONE', ( -0.05079999999999330200, 5.040811046037321200, 1.350681248983547800 ) ) ; +#3509 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#3510 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999998500, 4.999999999999995600, -3.207846720045877600E-016 ) ) ; +#3511 = FACE_OUTER_BOUND ( 'NONE', #1955, .T. ) ; +#3512 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000100, 4.999999999999991100, -24.44661701239532900 ) ) ; +#3513 = EDGE_CURVE ( 'NONE', #1128, #1580, #2664, .T. ) ; +#3514 = CARTESIAN_POINT ( 'NONE', ( 18.36902852881458200, 10.00000000000000200, 17.89504286779640200 ) ) ; +#3515 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#3516 = PLANE ( 'NONE', #85 ) ; +#3517 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -9.999999999999998200, 12.50000000000000200 ) ) ; +#3518 = CIRCLE ( 'NONE', #3102, 2.500000000000000000 ) ; +#3519 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 19.65546469306328300, -53.19394306809146400 ) ) ; +#3520 = CARTESIAN_POINT ( 'NONE', ( 13.19097421011493800, 12.92900252365550500, -18.36040606898744400 ) ) ; +#3521 = CARTESIAN_POINT ( 'NONE', ( 6.820552648763551100E-013, 16.11407165966091900, -26.79808782516066800 ) ) ; +#3522 = EDGE_CURVE ( 'NONE', #2099, #2136, #3324, .T. ) ; +#3523 = CIRCLE ( 'NONE', #419, 1.000000000000000000 ) ; +#3524 = CIRCLE ( 'NONE', #2561, 3.964466094067293800 ) ; +#3526 = CARTESIAN_POINT ( 'NONE', ( 14.61642707707597200, -9.999999999999998200, 12.50000000000000200 ) ) ; +#3525 = DIRECTION ( 'NONE', ( 0.09921409459785381100, -0.4173950502300323200, 0.9032928293065306500 ) ) ; +#3527 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3441, #4220, #4260, #1819 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0007744659881017549400 ), + .UNSPECIFIED. ) ; +#3528 = VERTEX_POINT ( 'NONE', #2698 ) ; +#3529 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753949800, 11.47788851493753800, -22.67481328856044700 ) ) ; +#3530 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3531 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.05053679846259500, -58.60951228518563700 ) ) ; +#3532 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.258686208197953500, -29.95633160533156000 ) ) ; +#3533 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000300, -19.75971928798615100, -31.08096380043233600 ) ) ; +#3534 = CARTESIAN_POINT ( 'NONE', ( 5.860275124203436500, 13.00777687011805600, -18.67658847247496100 ) ) ; +#3535 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3536 = ORIENTED_EDGE ( 'NONE', *, *, #2397, .F. ) ; +#3537 = AXIS2_PLACEMENT_3D ( 'NONE', #4215, #1777, #4610 ) ; +#3538 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.999999986243333100, 15.50296376571724200 ) ) ; +#3539 = EDGE_LOOP ( 'NONE', ( #4600, #1027, #4676, #1262, #1660 ) ) ; +#3540 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.154085150328967300, -46.14206906555680400 ) ) ; +#3541 = ORIENTED_EDGE ( 'NONE', *, *, #4369, .T. ) ; +#3543 = CARTESIAN_POINT ( 'NONE', ( 10.72725544080978800, -9.999999999999998200, 12.57183269374850300 ) ) ; +#3542 = CARTESIAN_POINT ( 'NONE', ( 2.563638772164937900, 1.565243845647139400, -29.59892855730910500 ) ) ; +#3544 = EDGE_CURVE ( 'NONE', #2112, #2473, #2918, .T. ) ; +#3545 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.650775477637225200, -30.32756122834777200 ) ) ; +#3546 = ORIENTED_EDGE ( 'NONE', *, *, #2885, .F. ) ; +#3547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.3451738168750248000, 0.9385387771125531800 ) ) ; +#3548 = ORIENTED_EDGE ( 'NONE', *, *, #1626, .T. ) ; +#3549 = CARTESIAN_POINT ( 'NONE', ( 5.850815817174450700, 13.00878627922771400, -18.68061103038928600 ) ) ; +#3550 = CARTESIAN_POINT ( 'NONE', ( 19.10846439191156400, -0.03903362755762712600, 17.56241685492070600 ) ) ; +#3551 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000010000, -1.344975374019993900, -23.93325137991950400 ) ) ; +#3552 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#3553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#3554 = EDGE_CURVE ( 'NONE', #2803, #5054, #1721, .T. ) ; +#3555 = CARTESIAN_POINT ( 'NONE', ( 6.799702216446590300, 24.44339094876634600, -58.99098694554899700 ) ) ; +#3556 = ORIENTED_EDGE ( 'NONE', *, *, #4257, .T. ) ; +#3557 = CARTESIAN_POINT ( 'NONE', ( -1.331225465545434900E-013, 15.70499120339449900, -26.10689788031923800 ) ) ; +#3558 = CARTESIAN_POINT ( 'NONE', ( 5.953847728951651600, -9.999999999998014000, 17.30509895275379500 ) ) ; +#3559 = ORIENTED_EDGE ( 'NONE', *, *, #72, .T. ) ; +#3560 = CARTESIAN_POINT ( 'NONE', ( 19.25217941707264300, 8.986106488767180900, 17.36741989591082100 ) ) ; +#3561 = ORIENTED_EDGE ( 'NONE', *, *, #2140, .F. ) ; +#3562 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1591, #4040, #2000, #4833, #2409, #5233, #2807, #367, #3221, #784, #3641, #1201 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002312366223014858500, 0.004624732446029717000, 0.005780915557537146800, 0.006937098669044576700, 0.009249464892059440800 ), + .UNSPECIFIED. ) ; +#3563 = CARTESIAN_POINT ( 'NONE', ( 1.461745347014679300, 1.662852976181701000, -29.11309985560424400 ) ) ; +#3565 = DIRECTION ( 'NONE', ( -1.000000000000000000, -6.915161896257736000E-017, 2.580773553939889600E-016 ) ) ; +#3564 = CARTESIAN_POINT ( 'NONE', ( 2.011550719881226800, -0.2801026181610647400, -25.90746340237726000 ) ) ; +#3566 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 8.969250877858083700, 15.68688548806216200 ) ) ; +#3567 = CARTESIAN_POINT ( 'NONE', ( 18.25319498967005300, 2.861659670334346200, -30.82764420363785300 ) ) ; +#3568 = ORIENTED_EDGE ( 'NONE', *, *, #672, .F. ) ; +#3569 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, -11.59115779176004500, -61.56645032909980800 ) ) ; +#3570 = CARTESIAN_POINT ( 'NONE', ( 8.810413066714927400, 13.40086529363876600, -20.30486255416340700 ) ) ; +#3571 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 4.657035876508374800, 17.19065370001207800 ) ) ; +#3572 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002900, 1.436033790803517700, -25.37970353119720500 ) ) ; +#3573 = FACE_OUTER_BOUND ( 'NONE', #2859, .T. ) ; +#3574 = AXIS2_PLACEMENT_3D ( 'NONE', #3100, #674, #3530 ) ; +#3575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025145200 ) ) ; +#3576 = CARTESIAN_POINT ( 'NONE', ( 1.642976736430983100, 11.01185995031646500, -56.09392275953656800 ) ) ; +#3577 = EDGE_LOOP ( 'NONE', ( #660, #3461, #5196, #527 ) ) ; +#3578 = CARTESIAN_POINT ( 'NONE', ( 1.159374968282220500, 14.36915008244270300, -23.80589009357031600 ) ) ; +#3579 = CARTESIAN_POINT ( 'NONE', ( 10.78096886802728300, -5.690355937288492400, 17.52394423124950200 ) ) ; +#3580 = CARTESIAN_POINT ( 'NONE', ( 6.138246941752012000, 24.04512901772691100, -62.84416434223914600 ) ) ; +#3581 = LINE ( 'NONE', #2030, #315 ) ; +#3582 = EDGE_LOOP ( 'NONE', ( #3995, #1536, #1062, #587, #2490 ) ) ; +#3583 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 0.0000000000000000000, 16.50000000000000000 ) ) ; +#3584 = VECTOR ( 'NONE', #4702, 1000.000000000000000 ) ; +#3586 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -10.00000000000000400, -7.499999999999995600 ) ) ; +#3585 = CARTESIAN_POINT ( 'NONE', ( 6.236638075946714800, 1.224881419885539100, -24.49898180325884700 ) ) ; +#3587 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3588 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 2.762743644278188500, -31.17727541485820800 ) ) ; +#3589 = EDGE_CURVE ( 'NONE', #2434, #2555, #3645, .T. ) ; +#3590 = LINE ( 'NONE', #1407, #4527 ) ; +#3591 = CARTESIAN_POINT ( 'NONE', ( 10.40075244362724200, 11.02204165693050400, -20.85574829008593100 ) ) ; +#3592 = EDGE_CURVE ( 'NONE', #2668, #2942, #2545, .T. ) ; +#3593 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 7.804772097074512700, 17.53238811383921100 ) ) ; +#3594 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.000000000000005300, 15.31390237722978800 ) ) ; +#3595 = CARTESIAN_POINT ( 'NONE', ( 4.177198879146105900, 10.00000000000000200, 17.68103530455573100 ) ) ; +#3596 = DIRECTION ( 'NONE', ( -2.981679935612492900E-015, -0.2588190451025037500, 0.9659258262890729800 ) ) ; +#3597 = LINE ( 'NONE', #4970, #4784 ) ; +#3598 = CARTESIAN_POINT ( 'NONE', ( 8.810979495720388900, 20.70774102193166800, -60.59018842338686300 ) ) ; +#3599 = AXIS2_PLACEMENT_3D ( 'NONE', #632, #3490, #1054 ) ; +#3600 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333800, 11.07935950138769600, -56.35951613027766900 ) ) ; +#3601 = CYLINDRICAL_SURFACE ( 'NONE', #4414, 0.5800000000000006300 ) ; +#3602 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3604 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.674647099076112900, -30.76687062793725900 ) ) ; +#3603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890686500, -0.2588190451025191300 ) ) ; +#3605 = ORIENTED_EDGE ( 'NONE', *, *, #5168, .F. ) ; +#3606 = AXIS2_PLACEMENT_3D ( 'NONE', #3918, #5092, #1483 ) ; +#3607 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -3.673940397442059200E-015, -2.499999999999999600 ) ) ; +#3608 = ORIENTED_EDGE ( 'NONE', *, *, #1519, .F. ) ; +#3609 = CARTESIAN_POINT ( 'NONE', ( 5.500377052683335300, 8.614757265557774000, 21.76776695296905800 ) ) ; +#3610 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999000, 12.73833325550375800, -27.37885710048668000 ) ) ; +#3611 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 21.66487829819825000, -53.52313491720788400 ) ) ; +#3612 = ORIENTED_EDGE ( 'NONE', *, *, #14, .F. ) ; +#3613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3614 = CARTESIAN_POINT ( 'NONE', ( 10.00772392168479300, 26.26750395293914400, -59.18681045674151200 ) ) ; +#3615 = ADVANCED_FACE ( 'NONE', ( #4569 ), #1042, .T. ) ; +#3616 = AXIS2_PLACEMENT_3D ( 'NONE', #2087, #3312, #1696 ) ; +#3617 = ORIENTED_EDGE ( 'NONE', *, *, #5168, .T. ) ; +#3618 = EDGE_LOOP ( 'NONE', ( #475, #171, #3798, #360 ) ) ; +#3619 = CARTESIAN_POINT ( 'NONE', ( 17.33476122783559200, 1.565243845651932200, -29.59892855730768300 ) ) ; +#3620 = CARTESIAN_POINT ( 'NONE', ( 3.473277762242744400, 2.741240822848844500, -26.89392079468227000 ) ) ; +#3621 = ORIENTED_EDGE ( 'NONE', *, *, #2046, .T. ) ; +#3622 = ORIENTED_EDGE ( 'NONE', *, *, #295, .F. ) ; +#3623 = EDGE_CURVE ( 'NONE', #4554, #978, #3505, .T. ) ; +#3624 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 21.18155876113535600, -54.33638470296556700 ) ) ; +#3625 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1703400944239073000, 0.9853853318533083400 ) ) ; +#3626 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.77489008581955700, -26.94531476495734200 ) ) ; +#3627 = ORIENTED_EDGE ( 'NONE', *, *, #3931, .T. ) ; +#3628 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #2446, #408, ( #4054 ) ) ; +#3629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890706400, 0.2588190451025122500 ) ) ; +#3630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#3631 = EDGE_CURVE ( 'NONE', #4545, #2459, #3074, .T. ) ; +#3632 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 12.36099753491963000, -59.76816752739856800 ) ) ; +#3633 = CARTESIAN_POINT ( 'NONE', ( 12.05772943449807500, 23.69271671268332800, -63.86532230792376900 ) ) ; +#3634 = CIRCLE ( 'NONE', #716, 0.9999999999999995600 ) ; +#3635 = ORIENTED_EDGE ( 'NONE', *, *, #1792, .T. ) ; +#3636 = ORIENTED_EDGE ( 'NONE', *, *, #4161, .F. ) ; +#3637 = CARTESIAN_POINT ( 'NONE', ( 15.90243696025102700, 2.327765317425066100, -26.21722129005908300 ) ) ; +#3638 = LINE ( 'NONE', #4926, #1602 ) ; +#3639 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#3640 = ORIENTED_EDGE ( 'NONE', *, *, #4918, .F. ) ; +#3642 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, 4.650775477637227900, -30.32756122834776800 ) ) ; +#3641 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.945809930289590800, 17.05395098443784400 ) ) ; +#3643 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.68991880571496700, -52.91676192399938800 ) ) ; +#3644 = ADVANCED_FACE ( 'NONE', ( #497 ), #2690, .T. ) ; +#3645 = LINE ( 'NONE', #3103, #1475 ) ; +#3646 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000337000, 23.20185655476329200, -56.10347468986542200 ) ) ; +#3647 = ORIENTED_EDGE ( 'NONE', *, *, #2492, .F. ) ; +#3648 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -88.81885793164890700, -72.39384004447242700 ) ) ; +#3649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025159700, 0.9659258262890697600 ) ) ; +#3650 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000001200, 4.999999999999995600, -7.500000000000000900 ) ) ; +#3651 = AXIS2_PLACEMENT_3D ( 'NONE', #4859, #1220, #3257 ) ; +#3652 = CARTESIAN_POINT ( 'NONE', ( 18.55521247714949200, 22.67297223821715200, -55.43453337027263200 ) ) ; +#3653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890699800 ) ) ; +#3654 = LINE ( 'NONE', #2861, #503 ) ; +#3655 = ORIENTED_EDGE ( 'NONE', *, *, #115, .T. ) ; +#3656 = CARTESIAN_POINT ( 'NONE', ( 1.164802430365400200E-027, 9.999999999999966200, 15.31390237722992100 ) ) ; +#3657 = CARTESIAN_POINT ( 'NONE', ( 13.01423423231153700, 21.05620778028042700, -59.90904996456752900 ) ) ; +#3658 = CIRCLE ( 'NONE', #3224, 100.0000000000000100 ) ; +#3659 = EDGE_CURVE ( 'NONE', #4463, #5113, #241, .T. ) ; +#3660 = CYLINDRICAL_SURFACE ( 'NONE', #688, 10.00000000000000200 ) ; +#3661 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999999100, 16.50000000000000000 ) ) ; +#3662 = EDGE_CURVE ( 'NONE', #730, #5054, #2310, .T. ) ; +#3663 = CARTESIAN_POINT ( 'NONE', ( 17.02026781186545500, 10.00000000000000200, 16.46446609406728000 ) ) ; +#3664 = CIRCLE ( 'NONE', #3375, 4.999999999999997300 ) ; +#3665 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002900, 1.758564121058958700, -25.31515713847481300 ) ) ; +#3666 = CARTESIAN_POINT ( 'NONE', ( 9.949199999983481000, 11.02205614447058200, -20.85581036584218100 ) ) ; +#3667 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.969250883056062700, 15.68688548895128000 ) ) ; +#3668 = CARTESIAN_POINT ( 'NONE', ( 14.40274539476309100, 23.85447824392050700, -58.35537195421233700 ) ) ; +#3669 = ADVANCED_FACE ( 'NONE', ( #1223 ), #4330, .T. ) ; +#3670 = AXIS2_PLACEMENT_3D ( 'NONE', #4897, #2484, #22 ) ; +#3671 = ORIENTED_EDGE ( 'NONE', *, *, #3273, .F. ) ; +#3672 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -4.999999999999999100, 17.50000000000000000 ) ) ; +#3673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025146900 ) ) ; +#3674 = ORIENTED_EDGE ( 'NONE', *, *, #2681, .T. ) ; +#3675 = AXIS2_PLACEMENT_3D ( 'NONE', #1793, #4629, #2203 ) ; +#3676 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#3677 = CARTESIAN_POINT ( 'NONE', ( 1.142973941375585100, 14.32846130918672700, -23.74778188458881400 ) ) ; +#3678 = ORIENTED_EDGE ( 'NONE', *, *, #14, .T. ) ; +#3679 = CARTESIAN_POINT ( 'NONE', ( 19.74489713769894900, 7.732650233843879000, 17.65471666499330200 ) ) ; +#3680 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -1.457153238772571200, 16.50000000000000000 ) ) ; +#3681 = ORIENTED_EDGE ( 'NONE', *, *, #1056, .F. ) ; +#3682 = CARTESIAN_POINT ( 'NONE', ( 1.028622161007651300E-014, 8.831681242092839700, 17.17501982790567900 ) ) ; +#3683 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017200E-016, 1.320581149576798100, -31.07156646030470200 ) ) ; +#3684 = ORIENTED_EDGE ( 'NONE', *, *, #2819, .T. ) ; +#3685 = VERTEX_POINT ( 'NONE', #1625 ) ; +#3686 = ORIENTED_EDGE ( 'NONE', *, *, #3544, .F. ) ; +#3687 = EDGE_CURVE ( 'NONE', #4495, #2628, #2292, .T. ) ; +#3689 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.38292911867528400, -23.98896671405885100 ) ) ; +#3688 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2164, #5103, #650, #3512 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 0.7297276562269665600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9561149059751438100, 0.9561149059751438100, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#3690 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3691 = ADVANCED_FACE ( 'NONE', ( #3367 ), #4189, .T. ) ; +#3692 = EDGE_CURVE ( 'NONE', #4806, #3049, #1366, .T. ) ; +#3693 = ORIENTED_EDGE ( 'NONE', *, *, #4830, .T. ) ; +#3694 = CARTESIAN_POINT ( 'NONE', ( 14.29755213746740400, 13.37430100806965600, -65.28272951001795800 ) ) ; +#3695 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766148800, 12.18129507813263500, -62.96121213358091500 ) ) ; +#3696 = CYLINDRICAL_SURFACE ( 'NONE', #2552, 10.00000000000000200 ) ; +#3697 = CARTESIAN_POINT ( 'NONE', ( 15.51861280714203800, 2.072980127871193900, -25.80872155393685200 ) ) ; +#3698 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.999999999999999100, 12.50000000000000000 ) ) ; +#3699 = EDGE_CURVE ( 'NONE', #2587, #3366, #1922, .T. ) ; +#3700 = ORIENTED_EDGE ( 'NONE', *, *, #3399, .T. ) ; +#3701 = EDGE_LOOP ( 'NONE', ( #4514, #2281, #739, #1368 ) ) ; +#3702 = CARTESIAN_POINT ( 'NONE', ( 5.502758037260528000, 10.00000000000000500, 18.86642804994465500 ) ) ; +#3703 = CIRCLE ( 'NONE', #4939, 2.499999999999999600 ) ; +#3704 = ORIENTED_EDGE ( 'NONE', *, *, #1646, .T. ) ; +#3705 = FACE_OUTER_BOUND ( 'NONE', #2891, .T. ) ; +#3706 = AXIS2_PLACEMENT_3D ( 'NONE', #791, #3649, #1207 ) ; +#3707 = VERTEX_POINT ( 'NONE', #2055 ) ; +#3708 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999945200, 15.70510918634237600, -26.10709640624518000 ) ) ; +#3709 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.000000000000000000, 12.50000000000000200 ) ) ; +#3710 = APPROVAL_DATE_TIME ( #4771, #2139 ) ; +#3711 = FACE_OUTER_BOUND ( 'NONE', #2727, .T. ) ; +#3712 = CARTESIAN_POINT ( 'NONE', ( 9.086891771899546600, 14.83713814748493200, -66.56078488034108900 ) ) ; +#3713 = CARTESIAN_POINT ( 'NONE', ( 13.01271384433969300, 14.80005999518592000, -61.58606438088035200 ) ) ; +#3714 = AXIS2_PLACEMENT_3D ( 'NONE', #3127, #694, #3553 ) ; +#3715 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#3716 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 21.65584463200417500, -52.65794287889684000 ) ) ; +#3717 = CARTESIAN_POINT ( 'NONE', ( 14.66735988497186600, 1.606187905585669600, -25.07649214136418100 ) ) ; +#3718 = FACE_OUTER_BOUND ( 'NONE', #4083, .T. ) ; +#3719 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3720 = ADVANCED_FACE ( 'NONE', ( #3253 ), #99, .T. ) ; +#3721 = FACE_OUTER_BOUND ( 'NONE', #3867, .T. ) ; +#3722 = EDGE_CURVE ( 'NONE', #3287, #2257, #5274, .T. ) ; +#3723 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 7.709269841782330900, 16.93242356500261900 ) ) ; +#3724 = LINE ( 'NONE', #3498, #3457 ) ; +#3725 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4127, #4114, #2507 ), + ( #47, #2899, #466 ), + ( #3323, #886, #3739 ), + ( #1298, #4145, #1707 ), + ( #4542, #2113, #4933 ), + ( #2524, #62, #2915 ), + ( #482, #3336, #902 ), + ( #3759, #1315, #4156 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -5.421010862427522200E-020, 0.001788840144661157100, 0.002683260216991735600, 0.003577680289322314100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865471300, 1.000000000000000000), + ( 1.000000000000000000, 0.6509091694225577200, 1.000000000000000000), + ( 1.000000000000000000, 0.5921246132169483100, 1.000000000000000000), + ( 1.000000000000000000, 0.5114214142154032100, 1.000000000000000000), + ( 1.000000000000000000, 0.4858207451468935000, 1.000000000000000000), + ( 1.000000000000000000, 0.4409635493727293600, 1.000000000000000000), + ( 1.000000000000000000, 0.4217543166519182000, 1.000000000000000000), + ( 1.000000000000000000, 0.4082482904638619600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3726 = AXIS2_PLACEMENT_3D ( 'NONE', #4266, #4679, #2260 ) ; +#3727 = EDGE_CURVE ( 'NONE', #3483, #605, #2154, .T. ) ; +#3728 = CARTESIAN_POINT ( 'NONE', ( 4.392139043169491300, 12.68668219388658600, -64.25750115698925000 ) ) ; +#3729 = CARTESIAN_POINT ( 'NONE', ( 10.86562006115083900, 10.63200273735428800, -63.37817426752877000 ) ) ; +#3730 = ORIENTED_EDGE ( 'NONE', *, *, #4101, .T. ) ; +#3731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#3732 = CARTESIAN_POINT ( 'NONE', ( 12.32744594866202800, 12.86999092309950200, -18.12061929723432400 ) ) ; +#3733 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 9.000000000000001800, -7.500000000000000900 ) ) ; +#3734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025126300, 0.9659258262890706400 ) ) ; +#3735 = ORIENTED_EDGE ( 'NONE', *, *, #76, .F. ) ; +#3736 = EDGE_LOOP ( 'NONE', ( #4743, #1318, #4826, #3561 ) ) ; +#3737 = ORIENTED_EDGE ( 'NONE', *, *, #4126, .F. ) ; +#3738 = EDGE_LOOP ( 'NONE', ( #4812, #3406, #2233, #365, #2197 ) ) ; +#3739 = CARTESIAN_POINT ( 'NONE', ( 1.304566226053869500, 22.77417026361179000, -55.62076182303932400 ) ) ; +#3740 = ORIENTED_EDGE ( 'NONE', *, *, #3007, .T. ) ; +#3741 = ADVANCED_FACE ( 'NONE', ( #3101 ), #5136, .T. ) ; +#3742 = AXIS2_PLACEMENT_3D ( 'NONE', #4343, #1899, #4729 ) ; +#3743 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -1.119639546929087800, -7.800006512413587800 ) ) ; +#3744 = VERTEX_POINT ( 'NONE', #2879 ) ; +#3745 = CARTESIAN_POINT ( 'NONE', ( 10.55663538930219800, 14.87996612381354600, -66.58769424384213700 ) ) ; +#3746 = EDGE_LOOP ( 'NONE', ( #4916, #2465, #2155, #2639 ) ) ; +#3747 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#3748 = CARTESIAN_POINT ( 'NONE', ( 13.43980301257217600, 13.60653664408403800, -21.03986895863910800 ) ) ; +#3749 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3750 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3751 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, 4.999999999999991100, -24.44661701239532500 ) ) ; +#3752 = VERTEX_POINT ( 'NONE', #444 ) ; +#3753 = EDGE_CURVE ( 'NONE', #5264, #994, #944, .T. ) ; +#3754 = CIRCLE ( 'NONE', #145, 0.5800000000000006300 ) ; +#3755 = VERTEX_POINT ( 'NONE', #3297 ) ; +#3756 = ORIENTED_EDGE ( 'NONE', *, *, #2864, .T. ) ; +#3757 = AXIS2_PLACEMENT_3D ( 'NONE', #2546, #86, #2935 ) ; +#3758 = EDGE_CURVE ( 'NONE', #2587, #144, #2042, .T. ) ; +#3759 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.96533279648316700, -53.78041229006792900 ) ) ; +#3760 = EDGE_CURVE ( 'NONE', #227, #3295, #4466, .T. ) ; +#3761 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#3762 = LINE ( 'NONE', #3317, #494 ) ; +#3763 = VERTEX_POINT ( 'NONE', #3716 ) ; +#3764 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025234600, 0.9659258262890676500 ) ) ; +#3765 = CARTESIAN_POINT ( 'NONE', ( 8.812692681459434900, 15.44216185615214500, -62.00137173307774000 ) ) ; +#3766 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4331, #637, #654, #1891 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 7.757919228897728500E-018, 0.0009065014181592333500 ), + .UNSPECIFIED. ) ; +#3767 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999800, -10.00000000000000400, 3.606301576494562400E-015 ) ) ; +#3768 = VECTOR ( 'NONE', #1457, 1000.000000000000000 ) ; +#3769 = ORIENTED_EDGE ( 'NONE', *, *, #1509, .T. ) ; +#3770 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.457153238772569900, 16.50000000000000000 ) ) ; +#3771 = ADVANCED_FACE ( 'NONE', ( #1086 ), #4089, .T. ) ; +#3772 = AXIS2_PLACEMENT_3D ( 'NONE', #1429, #4655, #192 ) ; +#3773 = FACE_OUTER_BOUND ( 'NONE', #3863, .T. ) ; +#3774 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3775 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.68991880571510600, -52.91676192399936000 ) ) ; +#3776 = CARTESIAN_POINT ( 'NONE', ( 8.369315748792596200, 10.96965548240192200, -63.17402554077665400 ) ) ; +#3777 = CIRCLE ( 'NONE', #959, 2.499999999999998200 ) ; +#3778 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890700900, 0.2588190451025143600 ) ) ; +#3779 = CARTESIAN_POINT ( 'NONE', ( 15.61604818575298400, 2.127870689066572400, -25.89474162400635000 ) ) ; +#3780 = DIRECTION ( 'NONE', ( 0.1006687319876522200, 0.2575042443533940300, -0.9610189230915205900 ) ) ; +#3781 = CARTESIAN_POINT ( 'NONE', ( 7.587091801422841900, 23.74245649232674500, -63.75172494340527900 ) ) ; +#3782 = CIRCLE ( 'NONE', #1213, 1.000000000000000700 ) ; +#3783 = EDGE_CURVE ( 'NONE', #864, #4764, #4902, .T. ) ; +#3784 = ADVANCED_FACE ( 'NONE', ( #1907 ), #1767, .F. ) ; +#3785 = ORIENTED_EDGE ( 'NONE', *, *, #3589, .T. ) ; +#3786 = EDGE_CURVE ( 'NONE', #2473, #1818, #2857, .T. ) ; +#3787 = CARTESIAN_POINT ( 'NONE', ( 5.056824396105523300, 13.06076042854380500, -64.87162242587835700 ) ) ; +#3788 = CARTESIAN_POINT ( 'NONE', ( 12.19067733464618700, 15.12273526737223300, -61.83227528623670800 ) ) ; +#3789 = ORIENTED_EDGE ( 'NONE', *, *, #1764, .F. ) ; +#3790 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 13.46917154657032800, -24.57889436608361300 ) ) ; +#3791 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -9.000000000000000000, 12.50000000000000200 ) ) ; +#3792 = CARTESIAN_POINT ( 'NONE', ( 12.29196990989866300, 23.73857889406705700, -63.76078104163995900 ) ) ; +#3793 = ORIENTED_EDGE ( 'NONE', *, *, #1246, .F. ) ; +#3794 = EDGE_LOOP ( 'NONE', ( #3681, #4571, #4862, #2077 ) ) ; +#3795 = AXIS2_PLACEMENT_3D ( 'NONE', #3468, #5079, #2658 ) ; +#3796 = ORIENTED_EDGE ( 'NONE', *, *, #5245, .F. ) ; +#3797 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 9.154085150328956600, -46.14206906555681100 ) ) ; +#3798 = ORIENTED_EDGE ( 'NONE', *, *, #4721, .F. ) ; +#3799 = CARTESIAN_POINT ( 'NONE', ( 18.61462769891528500, 14.41416149606516100, -24.35128580674138000 ) ) ; +#3800 = AXIS2_PLACEMENT_3D ( 'NONE', #438, #3305, #869 ) ; +#3801 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884033500E-016, 1.501609746981066500, -31.74485237234840100 ) ) ; +#3802 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#3803 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890699800 ) ) ; +#3804 = ORIENTED_EDGE ( 'NONE', *, *, #3397, .F. ) ; +#3805 = CARTESIAN_POINT ( 'NONE', ( 1.647949868953396200, 2.736285505751852500, -30.57673845067522900 ) ) ; +#3806 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.954626213724068000, -27.94664268269578100 ) ) ; +#3807 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3808 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998900, 12.93424423647693000, -28.10801246388829000 ) ) ; +#3809 = ADVANCED_FACE ( 'NONE', ( #4993 ), #3816, .F. ) ; +#3810 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4693, #1858, #2672, #230, #3069, #643, #3503, #1067 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.003589111087175930800, 0.005056630637813828100, 0.006524150188451725800, 0.009459189289727519500 ), + .UNSPECIFIED. ) ; +#3811 = CIRCLE ( 'NONE', #2284, 9.267766952966360000 ) ; +#3812 = EDGE_CURVE ( 'NONE', #800, #153, #4883, .T. ) ; +#3813 = ORIENTED_EDGE ( 'NONE', *, *, #4885, .T. ) ; +#3814 = ORIENTED_EDGE ( 'NONE', *, *, #5199, .F. ) ; +#3815 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9077716748210485900, 0.4194646426012430500 ) ) ; +#3816 = CYLINDRICAL_SURFACE ( 'NONE', #4672, 7.500000000000002700 ) ; +#3817 = EDGE_CURVE ( 'NONE', #4975, #547, #3957, .T. ) ; +#3818 = ORIENTED_EDGE ( 'NONE', *, *, #3753, .T. ) ; +#3819 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2147, #2563, #102, #2953 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0008417482326424775700 ), + .UNSPECIFIED. ) ; +#3820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#3821 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#3822 = CIRCLE ( 'NONE', #5261, 1.000000000000000900 ) ; +#3823 = CARTESIAN_POINT ( 'NONE', ( 1.605383978337422000, 21.93975138825588200, -54.08197001789073300 ) ) ; +#3824 = EDGE_LOOP ( 'NONE', ( #4378, #3627, #1170, #3546, #2780, #2293, #1513, #4006 ) ) ; +#3825 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#3826 = APPROVAL_PERSON_ORGANIZATION ( #4891, #2139, #842 ) ; +#3827 = AXIS2_PLACEMENT_3D ( 'NONE', #1374, #4209, #1769 ) ; +#3828 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8074441630149893400, -0.5899440004042954000 ) ) ; +#3829 = CIRCLE ( 'NONE', #3947, 2.500000000000000000 ) ; +#3830 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.066770904698518100, -29.64756516413251900 ) ) ; +#3831 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3832 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.549851309102004300, -30.48957924233865300 ) ) ; +#3833 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 22.99168977591567000, -52.30000425137271900 ) ) ; +#3834 = FACE_OUTER_BOUND ( 'NONE', #2721, .T. ) ; +#3835 = CIRCLE ( 'NONE', #4619, 0.9999999999999998900 ) ; +#3836 = ADVANCED_FACE ( 'NONE', ( #693 ), #4957, .F. ) ; +#3837 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -2.312964634635743900E-016, -1.000000000000000000 ) ) ; +#3838 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -10.00000000000000400, -7.499999999999995600 ) ) ; +#3839 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999500, 9.610433777350905900, -56.61344415056136400 ) ) ; +#3840 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3841 = CIRCLE ( 'NONE', #4133, 1.000000000000000700 ) ; +#3842 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000300, 1.758564121058965500, -25.31515713847482400 ) ) ; +#3843 = CARTESIAN_POINT ( 'NONE', ( 19.07427028940858800, 9.741029979571305100, 16.47581843134696200 ) ) ; +#3844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#3845 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.4104047869209420100, 0.9119034547979169000 ) ) ; +#3847 = CARTESIAN_POINT ( 'NONE', ( 7.722641477129917200, 11.09633704577712300, -21.17106993630010700 ) ) ; +#3848 = ORIENTED_EDGE ( 'NONE', *, *, #2110, .T. ) ; +#3849 = CARTESIAN_POINT ( 'NONE', ( 0.5310724512539960500, 7.844516862624809400, 17.79836430621167400 ) ) ; +#3850 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3005, #5024, #977, #578 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0007559763663257873000 ), + .UNSPECIFIED. ) ; +#3851 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025144700 ) ) ; +#3852 = EDGE_CURVE ( 'NONE', #4504, #4426, #1145, .T. ) ; +#3853 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 22.25927290126366700, -57.11593263652586900 ) ) ; +#3854 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3855 = EDGE_CURVE ( 'NONE', #5172, #4016, #5049, .T. ) ; +#3856 = VERTEX_POINT ( 'NONE', #4983 ) ; +#3857 = ORIENTED_EDGE ( 'NONE', *, *, #2585, .T. ) ; +#3858 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3859 = AXIS2_PLACEMENT_3D ( 'NONE', #2238, #1849, #1031 ) ; +#3860 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 110.0000000000000000, 5.665249758739311600 ) ) ; +#3861 = EDGE_LOOP ( 'NONE', ( #3481, #2652, #433, #4169 ) ) ; +#3862 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3863 = EDGE_LOOP ( 'NONE', ( #2332, #3109, #4557, #4236 ) ) ; +#3864 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000600, -1.144762937382494100, -24.19409331178507100 ) ) ; +#3865 = CARTESIAN_POINT ( 'NONE', ( 18.29278170256250000, 2.247817814554681400, -29.82688374355949900 ) ) ; +#3866 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3867 = EDGE_LOOP ( 'NONE', ( #90, #2763, #4490, #2039 ) ) ; +#3868 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 13.77489008581955200, -26.94531476495732700 ) ) ; +#3869 = ADVANCED_FACE ( 'NONE', ( #1664 ), #2595, .T. ) ; +#3870 = EDGE_LOOP ( 'NONE', ( #406, #2393, #4134, #4728, #71, #1980, #421, #1059, #772, #149, #2024, #4183 ) ) ; +#3871 = CARTESIAN_POINT ( 'NONE', ( 0.6037581583363508300, 1.451956869417549100, 17.72507855881195500 ) ) ; +#3872 = AXIS2_PLACEMENT_3D ( 'NONE', #904, #3337, #1723 ) ; +#3873 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999993600, 20.93151399008784400, -53.63367624199320000 ) ) ; +#3874 = CARTESIAN_POINT ( 'NONE', ( 9.488045206219800000, 20.63007340772873700, -60.69751697428586100 ) ) ; +#3875 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3876 = EDGE_LOOP ( 'NONE', ( #5241, #3541, #4022, #65 ) ) ; +#3877 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890700900, -0.2588190451025143000 ) ) ; +#3878 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3879 = AXIS2_PLACEMENT_3D ( 'NONE', #2529, #66, #2922 ) ; +#3880 = ORIENTED_EDGE ( 'NONE', *, *, #1097, .F. ) ; +#3881 = ORIENTED_EDGE ( 'NONE', *, *, #786, .F. ) ; +#3882 = CARTESIAN_POINT ( 'NONE', ( 1.159716603725124800, 11.21918614572511800, -59.37057271542010300 ) ) ; +#3883 = CARTESIAN_POINT ( 'NONE', ( 9.369199999999999300, 5.000000000000000000, 22.50000000000000400 ) ) ; +#3884 = CIRCLE ( 'NONE', #3388, 1.000000000000000700 ) ; +#3885 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3886 = ORIENTED_EDGE ( 'NONE', *, *, #375, .F. ) ; +#3887 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#3888 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 12.44149154480392000, -20.47547379661466100 ) ) ; +#3889 = EDGE_CURVE ( 'NONE', #3937, #1128, #835, .T. ) ; +#3890 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -1.457153238772571200, 16.50000000000000000 ) ) ; +#3891 = CARTESIAN_POINT ( 'NONE', ( 2.062733673970536300E-014, 4.641191839835054000, 17.69329534418295700 ) ) ; +#3892 = CIRCLE ( 'NONE', #1535, 10.00000000000000200 ) ; +#3893 = ORIENTED_EDGE ( 'NONE', *, *, #5041, .T. ) ; +#3894 = DIRECTION ( 'NONE', ( -0.7071067811865441300, 0.0000000000000000000, -0.7071067811865507900 ) ) ; +#3895 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.97721493986673900, -57.41428473297627000 ) ) ; +#3896 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3897 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #5242, #3088 ) ; +#3898 = EDGE_CURVE ( 'NONE', #2193, #4016, #550, .T. ) ; +#3899 = FACE_OUTER_BOUND ( 'NONE', #1911, .T. ) ; +#3900 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890706400, 0.2588190451025124100 ) ) ; +#3901 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999400, 11.58968375916181500, -55.35516255565662600 ) ) ; +#3902 = CYLINDRICAL_SURFACE ( 'NONE', #1441, 0.9999999999999995600 ) ; +#3903 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017200E-016, 9.883603262881868200, -57.07077047884786900 ) ) ; +#3904 = SPHERICAL_SURFACE ( 'NONE', #2414, 2.500000000000000000 ) ; +#3906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3905 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.358343471938285900, -26.90678312696157100 ) ) ; +#3907 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#3908 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 16.50000000000000000 ) ) ; +#3909 = VECTOR ( 'NONE', #1074, 1000.000000000000000 ) ; +#3910 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 2.612651188657576300, -30.32807655698931300 ) ) ; +#3911 = CARTESIAN_POINT ( 'NONE', ( 14.39505261733226500, 10.00000000000000400, 18.86694295472350500 ) ) ; +#3912 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.709269841782314000, 16.93242356500262200 ) ) ; +#3913 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000002200, 0.4654998936849596400, -27.35715002713493900 ) ) ; +#3914 = DIRECTION ( 'NONE', ( -0.7499999999999984500, 0.1711927069771167200, -0.6388998803238653500 ) ) ; +#3915 = CIRCLE ( 'NONE', #3485, 1.000000000000000700 ) ; +#3916 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890686500, 0.2588190451025191300 ) ) ; +#3917 = AXIS2_PLACEMENT_3D ( 'NONE', #4528, #2096, #4915 ) ; +#3918 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 6.074766565851414100, 1.627728795527428400 ) ) ; +#3919 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 6.074766565851411400, 1.627728795527427600 ) ) ; +#3921 = CARTESIAN_POINT ( 'NONE', ( 0.8241297105914289200, 9.741029979571347800, 16.47581843134685900 ) ) ; +#3920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#3922 = ORIENTED_EDGE ( 'NONE', *, *, #1351, .T. ) ; +#3923 = EDGE_CURVE ( 'NONE', #2112, #2134, #3703, .T. ) ; +#3924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3925 = ORIENTED_EDGE ( 'NONE', *, *, #4714, .T. ) ; +#3926 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1957, #4416, #5211 ), + ( #2782, #347, #3199 ), + ( #764, #3619, #1179 ), + ( #4036, #1588, #4428 ), + ( #1997, #4827, #2406 ), + ( #5230, #2804, #364 ), + ( #3217, #782, #3637 ), + ( #1197, #4053, #3697 ), + ( #26, #2880, #446 ), + ( #3298, #861, #3717 ), + ( #1276, #4122, #1683 ), + ( #4522, #2088, #4909 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.03349566630219032200, 0.03589909137334462700, 0.03830251644449893200, 0.03950422898007608500, 0.04070594151565323800, 0.04310936658680753600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7131395890707207300, 1.000000000000000000), + ( 1.000000000000000000, 0.7181110261326273400, 1.000000000000000000), + ( 1.000000000000000000, 0.7235599925368629800, 1.000000000000000000), + ( 1.000000000000000000, 0.7351902786182591400, 1.000000000000000000), + ( 1.000000000000000000, 0.7411547935569549100, 1.000000000000000000), + ( 1.000000000000000000, 0.7500218152241823200, 1.000000000000000000), + ( 1.000000000000000000, 0.7529750436688680300, 1.000000000000000000), + ( 1.000000000000000000, 0.7587696513575068500, 1.000000000000000000), + ( 1.000000000000000000, 0.7615716444913421800, 1.000000000000000000), + ( 1.000000000000000000, 0.7696304304994883200, 1.000000000000000000), + ( 1.000000000000000000, 0.7745472719881230100, 1.000000000000000000), + ( 1.000000000000000000, 0.7787896176724203900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3927 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, 15.34856020936186600, -27.46109844868023200 ) ) ; +#3928 = ORIENTED_EDGE ( 'NONE', *, *, #468, .T. ) ; +#3929 = AXIS2_PLACEMENT_3D ( 'NONE', #4363, #1923, #4752 ) ; +#3930 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#3931 = EDGE_CURVE ( 'NONE', #1829, #4764, #1538, .T. ) ; +#3932 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025144700, 0.9659258262890698700 ) ) ; +#3933 = CARTESIAN_POINT ( 'NONE', ( 12.31991496983723200, 12.86956953926633900, -18.11889706685133200 ) ) ; +#3934 = ORIENTED_EDGE ( 'NONE', *, *, #72, .F. ) ; +#3935 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.77489008581955000, -26.94531476495732700 ) ) ; +#3936 = ORIENTED_EDGE ( 'NONE', *, *, #2397, .T. ) ; +#3937 = VERTEX_POINT ( 'NONE', #1370 ) ; +#3938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#3939 = CARTESIAN_POINT ( 'NONE', ( 4.216966952966329200, 5.000000000000000000, 21.76776695296636200 ) ) ; +#3941 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.650775477637227900, -30.32756122834776800 ) ) ; +#3940 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666665200, 14.50935294783794700, -26.81835075481546600 ) ) ; +#3942 = VERTEX_POINT ( 'NONE', #2982 ) ; +#3943 = CARTESIAN_POINT ( 'NONE', ( 5.324870719592206000, 13.80881353517410800, -21.74305157635591000 ) ) ; +#3944 = CARTESIAN_POINT ( 'NONE', ( -0.05080000000000839400, 19.65596328590100900, -53.19380947054323600 ) ) ; +#3945 = ORIENTED_EDGE ( 'NONE', *, *, #2202, .F. ) ; +#3946 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.71977157637234700, -55.31356989215331800 ) ) ; +#3947 = AXIS2_PLACEMENT_3D ( 'NONE', #185, #3028, #598 ) ; +#3948 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#3949 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666600, 2.908428950725611400, -30.80318283654185400 ) ) ; +#3950 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753873500, 23.52613638748759700, -57.98022822821118900 ) ) ; +#3951 = CARTESIAN_POINT ( 'NONE', ( 5.053591196527469800, 13.10491831773607700, -19.06056575287889000 ) ) ; +#3952 = FACE_OUTER_BOUND ( 'NONE', #1471, .T. ) ; +#3953 = ORIENTED_EDGE ( 'NONE', *, *, #1552, .T. ) ; +#3954 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 9.873706547156610100, 15.88644078001534000 ) ) ; +#3955 = AXIS2_PLACEMENT_3D ( 'NONE', #4153, #1718, #4550 ) ; +#3956 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2311, #5141, #2710, #277, #3118, #686 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001103011993268280400, 0.002206023986536560900 ), + .UNSPECIFIED. ) ; +#3957 = LINE ( 'NONE', #3767, #2725 ) ; +#3958 = ORIENTED_EDGE ( 'NONE', *, *, #4338, .F. ) ; +#3960 = CARTESIAN_POINT ( 'NONE', ( 8.393310107494889000, -9.999999999999998200, 12.55747424044638500 ) ) ; +#3959 = CARTESIAN_POINT ( 'NONE', ( 3.073057674957345100, 3.142638607135218400, -27.56982136266850200 ) ) ; +#3961 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3962 = VECTOR ( 'NONE', #1648, 1000.000000000000000 ) ; +#3963 = EDGE_CURVE ( 'NONE', #4296, #4551, #4620, .T. ) ; +#3964 = CARTESIAN_POINT ( 'NONE', ( 6.875411862830401500, 11.17453714665065200, -21.49315003115317400 ) ) ; +#3965 = EDGE_CURVE ( 'NONE', #5114, #883, #4292, .T. ) ; +#3966 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.470318129669551800, 17.46044410252862600 ) ) ; +#3967 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#3968 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -10.00000000000000500, -7.499999999999995600 ) ) ; +#3969 = CARTESIAN_POINT ( 'NONE', ( 5.117206378629519200, 8.543731543841879300, 21.51517468535263000 ) ) ; +#3970 = TOROIDAL_SURFACE ( 'NONE', #4200, 3.964466094067294700, 2.500000000000000000 ) ; +#3971 = CARTESIAN_POINT ( 'NONE', ( 6.480277327697549200, 21.12020710469065300, -59.68953802631353500 ) ) ; +#3972 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.61149750935864900, -25.76358215211633900 ) ) ; +#3973 = CARTESIAN_POINT ( 'NONE', ( 6.837758466823536300, -9.999999999999998200, 12.52113835550195700 ) ) ; +#3974 = EDGE_CURVE ( 'NONE', #3226, #4299, #2489, .T. ) ; +#3975 = VECTOR ( 'NONE', #3837, 1000.000000000000000 ) ; +#3976 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.391663898160237200, 16.63498795241001500 ) ) ; +#3977 = CARTESIAN_POINT ( 'NONE', ( 1.605618297437757300, 2.247817814556007500, -29.82688374356119000 ) ) ; +#3978 = CIRCLE ( 'NONE', #1917, 6.123724356957925600 ) ; +#3980 = CARTESIAN_POINT ( 'NONE', ( 19.43676419246556400, 6.899016468085527300, 17.90890010935053000 ) ) ; +#3979 = CARTESIAN_POINT ( 'NONE', ( 4.134373522791584300, 0.1004662255354246800, -26.61798308026023500 ) ) ; +#3981 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.759847035867494500, 16.20941206333382900 ) ) ; +#3982 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.533070769978143000, -30.09878430398282100 ) ) ; +#3983 = AXIS2_PLACEMENT_3D ( 'NONE', #4458, #2022, #4852 ) ; +#3984 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#3985 = FACE_OUTER_BOUND ( 'NONE', #2956, .T. ) ; +#3986 = CARTESIAN_POINT ( 'NONE', ( 8.740012004093939500, 12.82069195956546500, -17.91827850483622000 ) ) ; +#3987 = CARTESIAN_POINT ( 'NONE', ( 19.49498418415306800, 4.633714465726471100, 17.99332407199086600 ) ) ; +#3988 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002900, 1.758564121058958700, -25.31515713847481300 ) ) ; +#3989 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338607400, 13.40741737109299000, -20.21665475151214500 ) ) ; +#3990 = CARTESIAN_POINT ( 'NONE', ( 2.462089024456396700, 12.78589111279255700, -55.55833699520960100 ) ) ; +#3991 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884113400E-016, 14.19364074059508400, -23.15088031259203300 ) ) ; +#3992 = CARTESIAN_POINT ( 'NONE', ( 11.60809263090109800, -9.999999999999328500, 16.96943761211205300 ) ) ; +#3993 = CARTESIAN_POINT ( 'NONE', ( 8.369027331983916800, 25.16700604650841900, -59.36976151861571800 ) ) ; +#3994 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2231, #5055, #1025 ), + ( #3882, #1447, #4279 ), + ( #1843, #4674, #2254 ), + ( #5074, #2653, #210 ), + ( #3054, #623, #3486 ), + ( #1048, #3903, #1465 ), + ( #4300, #1861, #4695 ), + ( #2272, #5095, #2674 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 1.897353801849632800E-019, 0.001788840144661154900, 0.002683260216991732600, 0.003577680289322309800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865500200, 1.000000000000000000), + ( 1.000000000000000000, 0.6509091694220592300, 1.000000000000000000), + ( 1.000000000000000000, 0.5921246132176138900, 1.000000000000000000), + ( 1.000000000000000000, 0.5114214142150754800, 1.000000000000000000), + ( 1.000000000000000000, 0.4858207451469795900, 1.000000000000000000), + ( 1.000000000000000000, 0.4409635493726499200, 1.000000000000000000), + ( 1.000000000000000000, 0.4217543166519781000, 1.000000000000000000), + ( 1.000000000000000000, 0.4082482904638637900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3995 = ORIENTED_EDGE ( 'NONE', *, *, #3479, .T. ) ; +#3996 = AXIS2_PLACEMENT_3D ( 'NONE', #4763, #2339, #5167 ) ; +#3997 = CARTESIAN_POINT ( 'NONE', ( 18.82653108957006400, 11.31592712553594300, -59.73161496724809200 ) ) ; +#3998 = ORIENTED_EDGE ( 'NONE', *, *, #943, .F. ) ; +#3999 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 22.50000000000000400 ) ) ; +#4000 = ORIENTED_EDGE ( 'NONE', *, *, #3898, .T. ) ; +#4002 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 14.93412558258008000, -27.57214587224189700 ) ) ; +#4001 = CARTESIAN_POINT ( 'NONE', ( 4.999117434595620000, -1.519806935941959300, -23.62012073531006400 ) ) ; +#4003 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999981100, 10.00000000000000200, 15.31390237722991000 ) ) ; +#4004 = EDGE_CURVE ( 'NONE', #2095, #2702, #439, .T. ) ; +#4005 = ORIENTED_EDGE ( 'NONE', *, *, #2709, .T. ) ; +#4006 = ORIENTED_EDGE ( 'NONE', *, *, #3200, .F. ) ; +#4007 = CARTESIAN_POINT ( 'NONE', ( 10.85583804060189000, 13.38960018143789600, -20.26413365597180800 ) ) ; +#4008 = AXIS2_PLACEMENT_3D ( 'NONE', #1491, #4326, #1888 ) ; +#4009 = CARTESIAN_POINT ( 'NONE', ( 3.985855738632461300, 10.00000000000000200, 19.90262145402612900 ) ) ; +#4010 = DIRECTION ( 'NONE', ( 8.673617379884026600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4011 = EDGE_CURVE ( 'NONE', #5265, #542, #311, .T. ) ; +#4012 = EDGE_LOOP ( 'NONE', ( #5046, #126, #1045, #3880 ) ) ; +#4013 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 22.99168977591564600, -52.30000425137273400 ) ) ; +#4014 = CARTESIAN_POINT ( 'NONE', ( 8.431572661022009600, 23.59060988119597400, -64.08326587013711200 ) ) ; +#4015 = VERTEX_POINT ( 'NONE', #200 ) ; +#4016 = VERTEX_POINT ( 'NONE', #1459 ) ; +#4017 = CARTESIAN_POINT ( 'NONE', ( 4.600214840689657700, 1.935723407444718700, -25.59084043750435100 ) ) ; +#4018 = CARTESIAN_POINT ( 'NONE', ( 1.689148147406995400, 11.05096511375679700, -56.07721347623028400 ) ) ; +#4019 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.154085150328956600, -46.14206906555681100 ) ) ; +#4020 = FACE_OUTER_BOUND ( 'NONE', #2188, .T. ) ; +#4021 = ADVANCED_FACE ( 'NONE', ( #4517 ), #164, .T. ) ; +#4022 = ORIENTED_EDGE ( 'NONE', *, *, #4011, .F. ) ; +#4023 = EDGE_LOOP ( 'NONE', ( #3559, #81, #489, #2346 ) ) ; +#4024 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.96533279648316000, -53.78041229006787900 ) ) ; +#4025 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4217, #1382, #4611, #2186, #5010, #2594, #142, #2990, #559, #3417 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001476718498124076400, 0.002953436996248152800, 0.004430155494372228800, 0.005906873992496305600 ), + .UNSPECIFIED. ) ; +#4026 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333339700, 11.00414968717551300, -55.80381863385395000 ) ) ; +#4027 = CIRCLE ( 'NONE', #2041, 4.999999999999997300 ) ; +#4028 = CARTESIAN_POINT ( 'NONE', ( 6.872352358177640700, 10.00000000000000400, 20.00000000000270000 ) ) ; +#4029 = CARTESIAN_POINT ( 'NONE', ( 17.43615724476456200, 13.87260203855395700, -27.33131007506638700 ) ) ; +#4030 = VERTEX_POINT ( 'NONE', #2268 ) ; +#4031 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4032 = CARTESIAN_POINT ( 'NONE', ( 10.40302057584370800, 20.64034593018394400, -60.68399193929778300 ) ) ; +#4033 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11, #2218, #5043 ), + ( #2624, #180, #3023 ), + ( #594, #3453, #1013 ), + ( #3871, #1435, #4269 ), + ( #1830, #4662, #2242 ), + ( #5063, #2640, #196 ), + ( #3045, #613, #3472 ), + ( #1034, #3891, #1456 ), + ( #4289, #1850, #4685 ), + ( #2263, #5083, #2663 ), + ( #222, #3062, #636 ), + ( #3494, #1058, #3912 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.168404344971008900E-019, 0.002312366223014861100, 0.004624732446029722200, 0.005780915557537152900, 0.006937098669044582800, 0.009249464892059444300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865473500, 1.000000000000000000), + ( 1.000000000000000000, 0.7442351329155699700, 1.000000000000000000), + ( 1.000000000000000000, 0.7783722774685362100, 1.000000000000000000), + ( 1.000000000000000000, 0.8360335679050603400, 1.000000000000000000), + ( 1.000000000000000000, 0.8595166983551424400, 1.000000000000000000), + ( 1.000000000000000000, 0.8820458337795253900, 1.000000000000000000), + ( 1.000000000000000000, 0.8874353740766137700, 1.000000000000000000), + ( 1.000000000000000000, 0.8934770379445339300, 1.000000000000000000), + ( 1.000000000000000000, 0.8941255649452926100, 1.000000000000000000), + ( 1.000000000000000000, 0.8888465352750449800, 1.000000000000000000), + ( 1.000000000000000000, 0.8756115354393259100, 1.000000000000000000), + ( 1.000000000000000000, 0.8546452472470432700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4034 = CIRCLE ( 'NONE', #130, 1.000000000000000700 ) ; +#4035 = VERTEX_POINT ( 'NONE', #5091 ) ; +#4036 = CARTESIAN_POINT ( 'NONE', ( 19.11738976614607200, 0.6426147954370358100, -27.70372733372252200 ) ) ; +#4037 = EDGE_CURVE ( 'NONE', #4069, #1310, #3425, .T. ) ; +#4038 = CARTESIAN_POINT ( 'NONE', ( 3.066430889853629900, 3.174435829750625900, -27.62926661662131900 ) ) ; +#4039 = CIRCLE ( 'NONE', #454, 5.732233047033670200 ) ; +#4041 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4040 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.6815329890154361300, 16.50000000000000400 ) ) ; +#4042 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338496400, 24.01142209705481200, -59.79133915250319100 ) ) ; +#4043 = CYLINDRICAL_SURFACE ( 'NONE', #889, 100.0000000000000000 ) ; +#4044 = CARTESIAN_POINT ( 'NONE', ( 18.28631956967463200, 21.91351380463671100, -54.03273215050316500 ) ) ; +#4045 = EDGE_CURVE ( 'NONE', #3414, #4723, #1280, .T. ) ; +#4046 = FACE_OUTER_BOUND ( 'NONE', #2138, .T. ) ; +#4047 = DIRECTION ( 'NONE', ( -4.489794735692287200E-016, -0.2588190451025128000, 0.9659258262890706400 ) ) ; +#4048 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666667400, 11.07935950138772100, -56.35951613027771900 ) ) ; +#4049 = FACE_OUTER_BOUND ( 'NONE', #4447, .T. ) ; +#4050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#4051 = CARTESIAN_POINT ( 'NONE', ( 10.86444557285136600, 25.56240489591141300, -59.37772521925455000 ) ) ; +#4052 = ADVANCED_FACE ( 'NONE', ( #3573 ), #2791, .T. ) ; +#4053 = CARTESIAN_POINT ( 'NONE', ( 15.76402647720966500, 0.1004662255327864000, -26.61798308026167700 ) ) ; +#4054 = PRODUCT ( 'Hammer_Slide', 'Hammer_Slide', '', ( #2842 ) ) ; +#4055 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025138600, -0.9659258262890700900 ) ) ; +#4056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.4987481893194286000, 0.8667469317226288400 ) ) ; +#4057 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.76821151113745900, -53.20895427849814800 ) ) ; +#4058 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 22.25927290126366400, -57.11593263652586900 ) ) ; +#4059 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333357400, 3.023894846702077600, -31.05974356099690300 ) ) ; +#4060 = VERTEX_POINT ( 'NONE', #4315 ) ; +#4061 = CARTESIAN_POINT ( 'NONE', ( 18.75542605862441500, 23.04350597890737600, -56.27277138221946000 ) ) ; +#4062 = ORIENTED_EDGE ( 'NONE', *, *, #4793, .T. ) ; +#4063 = CARTESIAN_POINT ( 'NONE', ( 14.03591230968689100, 24.09671094341741300, -62.62330134019030900 ) ) ; +#4064 = ORIENTED_EDGE ( 'NONE', *, *, #3169, .F. ) ; +#4065 = ORIENTED_EDGE ( 'NONE', *, *, #4443, .F. ) ; +#4066 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5102, #1813, #4645, #2223, #5045, #2626, #184, #3027, #597, #3455, #1018, #3874, #1437, #4271, #1833, #4665, #2244, #5065, #2642, #198 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001371930648718650600, 0.002743861297437301100, 0.004115791946155951900, 0.004801757270515277100, 0.005487722594874602300, 0.006859653243593252600, 0.008231583892311903800, 0.009603514541030554200, 0.01097544518974920500 ), + .UNSPECIFIED. ) ; +#4067 = ORIENTED_EDGE ( 'NONE', *, *, #4473, .T. ) ; +#4068 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666666100, 2.612651188657561200, -30.32807655698928100 ) ) ; +#4069 = VERTEX_POINT ( 'NONE', #5132 ) ; +#4070 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4071 = ADVANCED_FACE ( 'NONE', ( #1156 ), #2213, .T. ) ; +#4072 = EDGE_CURVE ( 'NONE', #4523, #4806, #42, .T. ) ; +#4073 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#4074 = VERTEX_POINT ( 'NONE', #3107 ) ; +#4075 = CARTESIAN_POINT ( 'NONE', ( 18.57938323357485500, 10.00000000000000200, 17.76972068680317900 ) ) ; +#4076 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 110.0000000000000000, 5.665249758739311600 ) ) ; +#4077 = ORIENTED_EDGE ( 'NONE', *, *, #1985, .T. ) ; +#4078 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753869000, 21.11132182176493200, -58.62727584096747100 ) ) ; +#4079 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4080 = EDGE_CURVE ( 'NONE', #1446, #2222, #3308, .T. ) ; +#4081 = CARTESIAN_POINT ( 'NONE', ( 0.9173168623885089600, 9.948751463531239700, 15.90511840410525200 ) ) ; +#4082 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824612000, 21.11132182176499900, -58.62727584096746400 ) ) ; +#4083 = EDGE_LOOP ( 'NONE', ( #276, #1948, #3857, #1214 ) ) ; +#4084 = ORIENTED_EDGE ( 'NONE', *, *, #341, .T. ) ; +#4085 = EDGE_LOOP ( 'NONE', ( #1956, #3674, #3369, #4922 ) ) ; +#4086 = AXIS2_PLACEMENT_3D ( 'NONE', #1886, #4716, #2296 ) ; +#4087 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#4088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#4089 = TOROIDAL_SURFACE ( 'NONE', #3616, 10.00000000000000400, 2.500000000000000000 ) ; +#4090 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#4091 = ORIENTED_EDGE ( 'NONE', *, *, #975, .F. ) ; +#4092 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000002700, 14.19364074059508600, -23.15088031259204000 ) ) ; +#4093 = CARTESIAN_POINT ( 'NONE', ( 18.91091875234820600, 10.00000000000000200, 15.30943332998660000 ) ) ; +#4094 = CARTESIAN_POINT ( 'NONE', ( -0.05080000000000145500, 4.650775477637222500, -30.32756122834776500 ) ) ; +#4095 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333339000, 21.45216315970806400, -53.00428186137944000 ) ) ; +#4096 = TOROIDAL_SURFACE ( 'NONE', #3651, 10.00000000000000400, 2.500000000000000000 ) ; +#4097 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.072138043605162800, 16.83448029338082500 ) ) ; +#4098 = ADVANCED_FACE ( 'NONE', ( #2360 ), #1750, .T. ) ; +#4099 = DATE_AND_TIME ( #5145, #951 ) ; +#4100 = LINE ( 'NONE', #2001, #4201 ) ; +#4101 = EDGE_CURVE ( 'NONE', #682, #3287, #3029, .T. ) ; +#4102 = VECTOR ( 'NONE', #2176, 1000.000000000000000 ) ; +#4103 = CARTESIAN_POINT ( 'NONE', ( 18.73868339627337000, 14.36952630350044100, -23.80729416967268000 ) ) ; +#4104 = CARTESIAN_POINT ( 'NONE', ( 0.4784628393089106500, 2.838101539512093700, 17.88562054783745500 ) ) ; +#4105 = EDGE_CURVE ( 'NONE', #3066, #1002, #4140, .T. ) ; +#4106 = CARTESIAN_POINT ( 'NONE', ( 13.48873096454601000, 13.82530292893732400, -65.77001973302923000 ) ) ; +#4107 = CARTESIAN_POINT ( 'NONE', ( 14.40319479909650700, 11.59931458847510800, -61.63872284039812400 ) ) ; +#4108 = FACE_OUTER_BOUND ( 'NONE', #1831, .T. ) ; +#4109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4110 = CIRCLE ( 'NONE', #564, 2.499999999999998700 ) ; +#4111 = CARTESIAN_POINT ( 'NONE', ( 6.520913302730949800, 10.00000000000000500, 19.72724588801399300 ) ) ; +#4112 = EDGE_LOOP ( 'NONE', ( #1659, #2267, #1805, #2596 ) ) ; +#4113 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.72409211488139400, -26.65145804808346600 ) ) ; +#4114 = CARTESIAN_POINT ( 'NONE', ( 1.348150961071065100E-030, 23.22519872755274400, -56.85711359142337800 ) ) ; +#4115 = ADVANCED_FACE ( 'NONE', ( #3177 ), #2778, .T. ) ; +#4116 = EDGE_LOOP ( 'NONE', ( #3422, #3156, #2418, #2045 ) ) ; +#4117 = AXIS2_PLACEMENT_3D ( 'NONE', #4350, #4736, #2318 ) ; +#4118 = CARTESIAN_POINT ( 'NONE', ( 8.575216948149641600, 14.72631418048772800, -66.48960538726571200 ) ) ; +#4119 = EDGE_LOOP ( 'NONE', ( #271, #1185, #5052, #4597, #1050, #767, #3407, #921, #4838, #4237, #813, #2633, #1967 ) ) ; +#4120 = CARTESIAN_POINT ( 'NONE', ( 14.03388512591168800, 13.52455605823105200, -65.45764440001103400 ) ) ; +#4121 = EDGE_LOOP ( 'NONE', ( #5137, #4367, #1579, #3096 ) ) ; +#4122 = CARTESIAN_POINT ( 'NONE', ( 14.42882796557579400, -0.5107193849339881600, -25.44068292925286600 ) ) ; +#4123 = EDGE_LOOP ( 'NONE', ( #2631, #1283, #4873, #1452, #4932, #3693, #1053, #2759, #1396, #2020, #469, #2364, #816, #3617, #3316, #541, #2408, #3756, #4612, #3068, #3730, #2354, #2943, #2519, #4398 ) ) ; +#4124 = ORIENTED_EDGE ( 'NONE', *, *, #4691, .F. ) ; +#4125 = ORIENTED_EDGE ( 'NONE', *, *, #5245, .T. ) ; +#4126 = EDGE_CURVE ( 'NONE', #836, #2210, #4196, .T. ) ; +#4127 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 22.25927290126367100, -57.11593263652589100 ) ) ; +#4128 = EDGE_CURVE ( 'NONE', #227, #211, #5057, .T. ) ; +#4129 = ORIENTED_EDGE ( 'NONE', *, *, #3662, .F. ) ; +#4130 = CARTESIAN_POINT ( 'NONE', ( 3.738215395107689100, 12.35125022597102400, -63.51389493086355700 ) ) ; +#4131 = CARTESIAN_POINT ( 'NONE', ( 11.53206594833899600, 15.33161127372991700, -61.94580249020251700 ) ) ; +#4132 = FACE_OUTER_BOUND ( 'NONE', #4232, .T. ) ; +#4133 = AXIS2_PLACEMENT_3D ( 'NONE', #3853, #1420, #4253 ) ; +#4134 = ORIENTED_EDGE ( 'NONE', *, *, #5200, .F. ) ; +#4135 = ORIENTED_EDGE ( 'NONE', *, *, #680, .F. ) ; +#4136 = CARTESIAN_POINT ( 'NONE', ( 11.73288446145076400, 11.07052886811940000, -21.06193542867402300 ) ) ; +#4137 = CARTESIAN_POINT ( 'NONE', ( 19.20212934703539200, 0.6921951114940968500, 17.63799351799797000 ) ) ; +#4138 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4139 = ADVANCED_FACE ( 'NONE', ( #888 ), #776, .F. ) ; +#4140 = CIRCLE ( 'NONE', #2673, 2.499999999999998700 ) ; +#4141 = ORIENTED_EDGE ( 'NONE', *, *, #4072, .F. ) ; +#4142 = VECTOR ( 'NONE', #3774, 1000.000000000000000 ) ; +#4143 = AXIS2_PLACEMENT_3D ( 'NONE', #3035, #606, #3463 ) ; +#4144 = ORIENTED_EDGE ( 'NONE', *, *, #4837, .F. ) ; +#4145 = CARTESIAN_POINT ( 'NONE', ( 7.781818709163104900E-013, 23.07123059981916300, -54.47573445326075600 ) ) ; +#4146 = FACE_OUTER_BOUND ( 'NONE', #2957, .T. ) ; +#4147 = DIRECTION ( 'NONE', ( -0.6306019374801599100, 0.7761064337101379900, 0.0000000000000000000 ) ) ; +#4148 = CARTESIAN_POINT ( 'NONE', ( 10.00817868220028700, 9.925449308558549800, -63.56567762184101200 ) ) ; +#4149 = AXIS2_PLACEMENT_3D ( 'NONE', #4923, #1273, #894 ) ; +#4150 = FACE_OUTER_BOUND ( 'NONE', #2571, .T. ) ; +#4151 = CARTESIAN_POINT ( 'NONE', ( 15.61456255316554100, 13.21717054447563600, -19.49772233475684000 ) ) ; +#4152 = LINE ( 'NONE', #1523, #3047 ) ; +#4153 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 16.50000000000000000 ) ) ; +#4154 = FACE_OUTER_BOUND ( 'NONE', #5037, .T. ) ; +#4155 = EDGE_CURVE ( 'NONE', #2459, #864, #417, .T. ) ; +#4156 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666667900, 21.66487829819825700, -53.52313491720793300 ) ) ; +#4157 = FACE_OUTER_BOUND ( 'NONE', #2733, .T. ) ; +#4158 = ADVANCED_FACE ( 'NONE', ( #1836 ), #4935, .F. ) ; +#4159 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4160 = APPROVAL ( #3676, 'UNSPECIFIED' ) ; +#4161 = EDGE_CURVE ( 'NONE', #1875, #2099, #765, .T. ) ; +#4162 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.154085150328951300, -46.14206906555680400 ) ) ; +#4163 = CARTESIAN_POINT ( 'NONE', ( 8.433856908671323500, 14.69235726841734600, -66.46816650825715600 ) ) ; +#4164 = DIRECTION ( 'NONE', ( 1.325001034533938900E-016, -1.625531029949085900E-016, -1.000000000000000000 ) ) ; +#4165 = CARTESIAN_POINT ( 'NONE', ( 13.02604764183132800, 7.499999999993236500, 22.50000000000000400 ) ) ; +#4166 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.91551665643370900, -56.04210610492307200 ) ) ; +#4167 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 3.674647099076111100, -30.76687062793726600 ) ) ; +#4168 = ORIENTED_EDGE ( 'NONE', *, *, #1868, .T. ) ; +#4169 = ORIENTED_EDGE ( 'NONE', *, *, #825, .T. ) ; +#4170 = ORIENTED_EDGE ( 'NONE', *, *, #5200, .T. ) ; +#4171 = ORIENTED_EDGE ( 'NONE', *, *, #1399, .T. ) ; +#4172 = ORIENTED_EDGE ( 'NONE', *, *, #2074, .T. ) ; +#4173 = CARTESIAN_POINT ( 'NONE', ( 7.090197342415112100, 14.88325701718009600, -61.65465656987179700 ) ) ; +#4174 = EDGE_LOOP ( 'NONE', ( #1159, #4871, #2404, #5210 ) ) ; +#4175 = CARTESIAN_POINT ( 'NONE', ( 6.474296369080529500, 14.62874440608542200, -61.43737320303540600 ) ) ; +#4176 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000300, 1.758564121058965500, -25.31515713847482400 ) ) ; +#4177 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#4178 = CARTESIAN_POINT ( 'NONE', ( 8.560685321502500500, 23.56941916577102000, -64.12443083459749000 ) ) ; +#4179 = ADVANCED_FACE ( 'NONE', ( #1978 ), #4373, .T. ) ; +#4180 = EDGE_LOOP ( 'NONE', ( #986, #3789, #3506, #2897 ) ) ; +#4181 = EDGE_CURVE ( 'NONE', #800, #974, #2795, .T. ) ; +#4182 = ORIENTED_EDGE ( 'NONE', *, *, #3662, .T. ) ; +#4183 = ORIENTED_EDGE ( 'NONE', *, *, #229, .T. ) ; +#4184 = EDGE_CURVE ( 'NONE', #3942, #1702, #4027, .T. ) ; +#4185 = EDGE_LOOP ( 'NONE', ( #5259, #746, #3174, #1897, #2520 ) ) ; +#4186 = CARTESIAN_POINT ( 'NONE', ( 6.020197833454319400, 11.53761194792401300, -62.01852162894636000 ) ) ; +#4187 = CARTESIAN_POINT ( 'NONE', ( 13.42198693163699400, 14.62960470052503800, -61.43836642473788600 ) ) ; +#4188 = AXIS2_PLACEMENT_3D ( 'NONE', #1388, #4221, #1782 ) ; +#4189 = CONICAL_SURFACE ( 'NONE', #4787, 4.999999999999998200, 0.7853981633974437300 ) ; +#4190 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.67323313865789200, -26.35724849109498200 ) ) ; +#4191 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.364201192633153400, -5.258819045102569600 ) ) ; +#4192 = ORIENTED_EDGE ( 'NONE', *, *, #2114, .F. ) ; +#4193 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4194 = CARTESIAN_POINT ( 'NONE', ( 13.18882421845095000, 23.92852009010230700, -63.25268161084623800 ) ) ; +#4195 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -9.000000000000005300, -7.499999999999998200 ) ) ; +#4196 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1993, #343, #2402, #5226 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009065014181572391800 ), + .UNSPECIFIED. ) ; +#4197 = CIRCLE ( 'NONE', #3067, 2.500000000000000000 ) ; +#4198 = CARTESIAN_POINT ( 'NONE', ( 5.281972922924028400, -9.999999999999998200, 12.50000000000000200 ) ) ; +#4199 = PERSON_AND_ORGANIZATION ( #4449, #3515 ) ; +#4200 = AXIS2_PLACEMENT_3D ( 'NONE', #1760, #3854, #1421 ) ; +#4201 = VECTOR ( 'NONE', #801, 1000.000000000000000 ) ; +#4202 = ORIENTED_EDGE ( 'NONE', *, *, #3699, .F. ) ; +#4203 = ADVANCED_FACE ( 'NONE', ( #1719 ), #618, .T. ) ; +#4204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890705300, -0.2588190451025126900 ) ) ; +#4205 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 14.19364074059509000, -23.15088031259205400 ) ) ; +#4206 = CIRCLE ( 'NONE', #4777, 2.500000000000000000 ) ; +#4207 = AXIS2_PLACEMENT_3D ( 'NONE', #461, #4138, #1700 ) ; +#4208 = CARTESIAN_POINT ( 'NONE', ( 2.468660243350287300, 3.299922318592740700, -30.09858895951091300 ) ) ; +#4209 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4210 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999944500, 1.066770904696638700, -29.64756516412823100 ) ) ; +#4211 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.358343471938294100, -26.90678312696156700 ) ) ; +#4212 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4213 = CARTESIAN_POINT ( 'NONE', ( 2.449199999838851400, 13.93339946170419800, -27.57776252449707900 ) ) ; +#4214 = CYLINDRICAL_SURFACE ( 'NONE', #5288, 5.000000000000000000 ) ; +#4215 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#4216 = EDGE_CURVE ( 'NONE', #2555, #2094, #4829, .T. ) ; +#4217 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -1.505759517047136500, -23.64527242200718100 ) ) ; +#4218 = FACE_OUTER_BOUND ( 'NONE', #418, .T. ) ; +#4219 = EDGE_CURVE ( 'NONE', #3087, #2942, #3884, .T. ) ; +#4220 = CARTESIAN_POINT ( 'NONE', ( 2.461937257624645400, 4.413519308181131300, -29.86898943321111600 ) ) ; +#4221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9875666767649550200, -0.1572006963833907600 ) ) ; +#4222 = EDGE_LOOP ( 'NONE', ( #4325, #5026, #2424, #3814 ) ) ; +#4223 = EDGE_CURVE ( 'NONE', #868, #1342, #3762, .T. ) ; +#4224 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666667000, 21.66487829819825700, -53.52313491720793300 ) ) ; +#4225 = ORIENTED_EDGE ( 'NONE', *, *, #1268, .F. ) ; +#4226 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338497700, 21.59660753133214000, -60.43838676525948000 ) ) ; +#4227 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#4228 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.621293852009688200, -28.94241537950746200 ) ) ; +#4229 = EDGE_LOOP ( 'NONE', ( #984, #4887, #3237, #871, #4251, #5127, #3612, #13, #1765, #1314 ) ) ; +#4230 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.258686208197977900, -29.95633160533158400 ) ) ; +#4231 = ADVANCED_FACE ( 'NONE', ( #2656 ), #1468, .T. ) ; +#4232 = EDGE_LOOP ( 'NONE', ( #1101, #2475, #607, #945 ) ) ; +#4233 = AXIS2_PLACEMENT_3D ( 'NONE', #2826, #395, #3244 ) ; +#4234 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4235 = EDGE_LOOP ( 'NONE', ( #2122, #1248, #879, #3740, #3936, #3159, #5106, #2334, #3886 ) ) ; +#4236 = ORIENTED_EDGE ( 'NONE', *, *, #4223, .F. ) ; +#4237 = ORIENTED_EDGE ( 'NONE', *, *, #3368, .T. ) ; +#4238 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4239 = AXIS2_PLACEMENT_3D ( 'NONE', #1158, #4010, #1567 ) ; +#4240 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4241 = CARTESIAN_POINT ( 'NONE', ( 19.94920000000000100, 12.93424423647691900, -28.10801246388829400 ) ) ; +#4242 = CARTESIAN_POINT ( 'NONE', ( 18.93869040551783600, 10.00000000000000200, 15.61662090189432700 ) ) ; +#4243 = VERTEX_POINT ( 'NONE', #57 ) ; +#4244 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666627500, 14.58456276204914600, -27.37404825123922300 ) ) ; +#4245 = PLANE ( 'NONE', #2080 ) ; +#4246 = CARTESIAN_POINT ( 'NONE', ( 8.819834421397549900, 11.04077061190376700, -20.93580272098499200 ) ) ; +#4247 = LINE ( 'NONE', #4162, #1001 ) ; +#4248 = EDGE_CURVE ( 'NONE', #3254, #3937, #3638, .T. ) ; +#4249 = CARTESIAN_POINT ( 'NONE', ( 0.4416956630128744400, 10.00000000000224000, 17.48022600617609600 ) ) ; +#4250 = ORIENTED_EDGE ( 'NONE', *, *, #948, .F. ) ; +#4251 = ORIENTED_EDGE ( 'NONE', *, *, #4473, .F. ) ; +#4252 = CARTESIAN_POINT ( 'NONE', ( 6.872352358174180300, 7.500000000000003600, 20.00000000000001400 ) ) ; +#4253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#4254 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 9.610433777350913000, -56.61344415056139200 ) ) ; +#4255 = VECTOR ( 'NONE', #1914, 1000.000000000000100 ) ; +#4256 = AXIS2_PLACEMENT_3D ( 'NONE', #1866, #217, #4699 ) ; +#4257 = EDGE_CURVE ( 'NONE', #2434, #3744, #4689, .T. ) ; +#4258 = ORIENTED_EDGE ( 'NONE', *, *, #3004, .T. ) ; +#4259 = ADVANCED_FACE ( 'NONE', ( #2541, #4567, #377 ), #1306, .F. ) ; +#4260 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, 4.532525364553611900, -30.09772422595440800 ) ) ; +#4261 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 18.09635858759372700, -61.37627564304205000 ) ) ; +#4262 = VECTOR ( 'NONE', #4917, 1000.000000000000000 ) ; +#4263 = ORIENTED_EDGE ( 'NONE', *, *, #1581, .F. ) ; +#4264 = CARTESIAN_POINT ( 'NONE', ( 18.43665465298628800, 1.662852976178255800, -29.11309985560006200 ) ) ; +#4265 = CIRCLE ( 'NONE', #4905, 1.000000000000000000 ) ; +#4266 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -10.00000000000000400, -7.499999999999995600 ) ) ; +#4267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9853853318533081200, -0.1703400944239075500 ) ) ; +#4268 = LINE ( 'NONE', #2711, #2109 ) ; +#4269 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.609990704473568000, 16.81510997846070100 ) ) ; +#4270 = VECTOR ( 'NONE', #2726, 1000.000000000000100 ) ; +#4271 = CARTESIAN_POINT ( 'NONE', ( 8.132265837231788200, 20.81155541110116400, -60.43194613632960700 ) ) ; +#4272 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4273 = EDGE_LOOP ( 'NONE', ( #2314, #3216, #762, #285, #2011, #1720, #143, #1880, #498, #5190, #1751, #232, #2900 ) ) ; +#4274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#4275 = TOROIDAL_SURFACE ( 'NONE', #3176, 101.0000000000000000, 1.000000000000000000 ) ; +#4276 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 4.532525364553619900, -30.09772422595441900 ) ) ; +#4277 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, 12.86897166900174100, -27.86441192573044700 ) ) ; +#4278 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#4279 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.20578333054913900, -59.18890017103550600 ) ) ; +#4280 = CIRCLE ( 'NONE', #1024, 2.500000000000000000 ) ; +#4282 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#4283 = EDGE_CURVE ( 'NONE', #1381, #4463, #1333, .T. ) ; +#4284 = CARTESIAN_POINT ( 'NONE', ( 18.26309179157634700, 21.51138181275023300, -52.98664168478050100 ) ) ; +#4285 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4286 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890696400, -0.2588190451025159100 ) ) ; +#4287 = ORIENTED_EDGE ( 'NONE', *, *, #1901, .F. ) ; +#4288 = CARTESIAN_POINT ( 'NONE', ( 13.97491862035804800, 10.00000000000000500, 21.22260419102910900 ) ) ; +#4289 = CARTESIAN_POINT ( 'NONE', ( 0.4010851409489083500, 5.041133175896027800, 17.99692471978653100 ) ) ; +#4290 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -9.999999999999998200, 12.49999999999999300 ) ) ; +#4291 = EDGE_CURVE ( 'NONE', #730, #2845, #2426, .T. ) ; +#4292 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3842, #1409, #5034, #2615, #172, #3016, #585, #3447, #1006, #3864, #1428, #600 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 3.469446951953614200E-018, 0.0004872227645978258000, 0.0009744455291956481300, 0.001948891058391291100, 0.002923336587586934300, 0.003897782116782576900 ), + .UNSPECIFIED. ) ; +#4293 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999945500, 10.33780837713521800, -57.88783380461553200 ) ) ; +#4294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025143600, -0.9659258262890699800 ) ) ; +#4295 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ; +#4296 = VERTEX_POINT ( 'NONE', #3346 ) ; +#4297 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000100, 4.999999999999996400, 7.499999999999999100 ) ) ; +#4298 = AXIS2_PLACEMENT_3D ( 'NONE', #1326, #1772, #5085 ) ; +#4299 = VERTEX_POINT ( 'NONE', #2131 ) ; +#4300 = CARTESIAN_POINT ( 'NONE', ( 1.644622171036025800, 11.10762676232861600, -56.63878884506422700 ) ) ; +#4301 = EDGE_LOOP ( 'NONE', ( #3925, #346, #4250, #4863, #201 ) ) ; +#4303 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.77489008581955700, -26.94531476495734200 ) ) ; +#4302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890700900, -0.2588190451025143000 ) ) ; +#4304 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 19.65596328590102400, -53.19380947054323600 ) ) ; +#4305 = ORIENTED_EDGE ( 'NONE', *, *, #3554, .T. ) ; +#4306 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999998500, -10.00000000000000400, 2.281300541960623200E-015 ) ) ; +#4307 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.258686208197977900, -29.95633160533158400 ) ) ; +#4308 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1893, #3950, #1912 ), + ( #4739, #2320, #5149 ), + ( #2718, #283, #3128 ), + ( #696, #3555, #1116 ), + ( #3971, #1531, #1047 ), + ( #5171, #2743, #305 ), + ( #3150, #723, #3580 ), + ( #1140, #3993, #1555 ), + ( #4393, #1953, #4786 ), + ( #2366, #5189, #2758 ), + ( #324, #3171, #741 ), + ( #3598, #1161, #4014 ), + ( #1569, #4412, #1972 ), + ( #4805, #2384, #5207 ), + ( #2779, #344, #3194 ), + ( #760, #3614, #1178 ), + ( #4032, #1585, #4425 ), + ( #1994, #4822, #2403 ), + ( #5227, #2800, #362 ), + ( #3215, #777, #3633 ), + ( #1194, #4051, #1606 ), + ( #4446, #2009, #4845 ), + ( #2422, #5247, #2817 ), + ( #382, #3232, #798 ), + ( #3657, #1211, #4063 ), + ( #1629, #4464, #2025 ), + ( #4857, #2444, #5263 ), + ( #2833, #400, #3252 ), + ( #815, #3668, #1230 ), + ( #4082, #1641, #4482 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -8.673617379884035500E-019, 0.001821963092897928500, 0.002732944639346893300, 0.003643926185795857900, 0.004554907732244822500, 0.005465889278693787500, 0.006376870825142752500, 0.007287852371591716600, 0.008198833918040680800, 0.009109815464489644900, 0.01002079701093860900, 0.01093177855738757500, 0.01184276010383654100, 0.01275374165028550500, 0.01457570474318343300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865474600, 1.000000000000000000), + ( 1.000000000000000000, 0.6772915413244160500, 1.000000000000000000), + ( 1.000000000000000000, 0.6445454458857008400, 1.000000000000000000), + ( 1.000000000000000000, 0.5939629448188544800, 1.000000000000000000), + ( 1.000000000000000000, 0.5767908629397552300, 1.000000000000000000), + ( 1.000000000000000000, 0.5429432263405192800, 1.000000000000000000), + ( 1.000000000000000000, 0.5263376991095092300, 1.000000000000000000), + ( 1.000000000000000000, 0.4945572982863994900, 1.000000000000000000), + ( 1.000000000000000000, 0.4793791521779906000, 1.000000000000000000), + ( 1.000000000000000000, 0.4515220704862155700, 1.000000000000000000), + ( 1.000000000000000000, 0.4388431758430386700, 1.000000000000000000), + ( 1.000000000000000000, 0.4173988080493822300, 1.000000000000000000), + ( 1.000000000000000000, 0.4086260181196309500, 1.000000000000000000), + ( 1.000000000000000000, 0.3968354681858943200, 1.000000000000000000), + ( 1.000000000000000000, 0.3937730349075048200, 1.000000000000000000), + ( 1.000000000000000000, 0.3937573777456112600, 1.000000000000000000), + ( 1.000000000000000000, 0.3968041983472732600, 1.000000000000000000), + ( 1.000000000000000000, 0.4085676386351859100, 1.000000000000000000), + ( 1.000000000000000000, 0.4173265843856870400, 1.000000000000000000), + ( 1.000000000000000000, 0.4387620092565336400, 1.000000000000000000), + ( 1.000000000000000000, 0.4514458673449849300, 1.000000000000000000), + ( 1.000000000000000000, 0.4793357291208347700, 1.000000000000000000), + ( 1.000000000000000000, 0.4945415424107257300, 1.000000000000000000), + ( 1.000000000000000000, 0.5263987182477931600, 1.000000000000000000), + ( 1.000000000000000000, 0.5430665799314885500, 1.000000000000000000), + ( 1.000000000000000000, 0.5770027115287665900, 1.000000000000000000), + ( 1.000000000000000000, 0.5940619912633503500, 1.000000000000000000), + ( 1.000000000000000000, 0.6445417317120621900, 1.000000000000000000), + ( 1.000000000000000000, 0.6772647162899529900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865465700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4309 = EDGE_LOOP ( 'NONE', ( #4792, #3421, #4065, #3608 ) ) ; +#4310 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.258686208197971700, -29.95633160533159200 ) ) ; +#4311 = CARTESIAN_POINT ( 'NONE', ( 15.91212639580285100, 9.999999999999618100, 19.90294249665755900 ) ) ; +#4312 = AXIS2_PLACEMENT_3D ( 'NONE', #2676, #233, #3073 ) ; +#4313 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 23.04549627076574600, -60.05015819760570400 ) ) ; +#4314 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.549851309102017200, -30.48957924233862800 ) ) ; +#4315 = CARTESIAN_POINT ( 'NONE', ( 5.281972922924028400, -4.999999999999998200, 17.50000000000000000 ) ) ; +#4316 = ORIENTED_EDGE ( 'NONE', *, *, #975, .T. ) ; +#4317 = CARTESIAN_POINT ( 'NONE', ( 19.25503562968317400, 8.968249737906107900, 17.37996765091353200 ) ) ; +#4318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025146900 ) ) ; +#4319 = ORIENTED_EDGE ( 'NONE', *, *, #4609, .T. ) ; +#4320 = ORIENTED_EDGE ( 'NONE', *, *, #2687, .T. ) ; +#4321 = CARTESIAN_POINT ( 'NONE', ( 18.89433678666758000, 8.006825569790164500, 18.06416896941142600 ) ) ; +#4322 = CARTESIAN_POINT ( 'NONE', ( 0.6855592176328264600, 9.199932192440925900, 17.19109984160497000 ) ) ; +#4323 = CIRCLE ( 'NONE', #290, 1.000000000000000000 ) ; +#4324 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.82641490963937200, -27.24337617903490000 ) ) ; +#4325 = ORIENTED_EDGE ( 'NONE', *, *, #2316, .F. ) ; +#4326 = DIRECTION ( 'NONE', ( -3.835815458611690100E-015, -0.4104047869209366800, 0.9119034547979191200 ) ) ; +#4327 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766149900, 24.01142209705481200, -59.79133915250319100 ) ) ; +#4328 = EDGE_CURVE ( 'NONE', #1303, #4486, #4459, .T. ) ; +#4329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025145200, 0.9659258262890700900 ) ) ; +#4330 = CYLINDRICAL_SURFACE ( 'NONE', #1425, 2.499999999999999600 ) ; +#4331 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.96533279648385000, -53.78041229006976200 ) ) ; +#4332 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 13.96819975629100700, -27.83096491734441700 ) ) ; +#4333 = EDGE_LOOP ( 'NONE', ( #1330, #927, #4381 ) ) ; +#4334 = ORIENTED_EDGE ( 'NONE', *, *, #1167, .T. ) ; +#4335 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 23.04549627076574600, -60.05015819760570400 ) ) ; +#4336 = CARTESIAN_POINT ( 'NONE', ( 11.14382874642171800, 12.81714827687043400, -17.90388636120899300 ) ) ; +#4337 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666666100, 14.50935294783794500, -26.81835075481546900 ) ) ; +#4338 = EDGE_CURVE ( 'NONE', #2587, #1645, #234, .T. ) ; +#4339 = CYLINDRICAL_SURFACE ( 'NONE', #63, 2.500000000000000000 ) ; +#4340 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.999999999999968000, 15.31390237722992300 ) ) ; +#4341 = PERSON_AND_ORGANIZATION ( #4449, #3515 ) ; +#4342 = CARTESIAN_POINT ( 'NONE', ( 6.779968819409336200, 10.00000000000000400, 20.00000000000000400 ) ) ; +#4344 = CARTESIAN_POINT ( 'NONE', ( 13.83837163626618500, -9.999999999999998200, 12.50000000000000000 ) ) ; +#4343 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#4345 = AXIS2_PLACEMENT_3D ( 'NONE', #5099, #2259, #2278 ) ; +#4346 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, 12.71974078022391400, -55.31345495936270100 ) ) ; +#4347 = CIRCLE ( 'NONE', #5023, 0.9999999999999990000 ) ; +#4348 = CARTESIAN_POINT ( 'NONE', ( 4.275703318940197800, 13.21857897336280100, -19.50313378119325600 ) ) ; +#4349 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890705300, 0.2588190451025125800 ) ) ; +#4350 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 12.65496680558645800, -55.06972082365661000 ) ) ; +#4351 = DIRECTION ( 'NONE', ( -1.000000000000000000, -6.915161896257736000E-017, 2.580773553939889600E-016 ) ) ; +#4352 = CARTESIAN_POINT ( 'NONE', ( 3.793685444701631500, 13.30523314635813600, -19.83529803306960600 ) ) ; +#4353 = FACE_OUTER_BOUND ( 'NONE', #522, .T. ) ; +#4354 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, -20.25401967945299100, -29.23620962527683900 ) ) ; +#4355 = AXIS2_PLACEMENT_3D ( 'NONE', #513, #3370, #3396 ) ; +#4356 = CARTESIAN_POINT ( 'NONE', ( 19.07228675689429700, 9.746319623092880100, 16.46422904060945700 ) ) ; +#4357 = FACE_OUTER_BOUND ( 'NONE', #831, .T. ) ; +#4358 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 12.36099753491963700, -59.76816752739859600 ) ) ; +#4360 = CARTESIAN_POINT ( 'NONE', ( 6.060028363733815500, -9.999999999999998200, 12.50000000000000400 ) ) ; +#4359 = CARTESIAN_POINT ( 'NONE', ( 0.7810102338540695400, 0.6426147954368621700, -27.70372733372216300 ) ) ; +#4361 = EDGE_LOOP ( 'NONE', ( #2399, #1837, #288, #3071, #624 ) ) ; +#4362 = EDGE_CURVE ( 'NONE', #4518, #1609, #3364, .T. ) ; +#4363 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 22.50000000000000400 ) ) ; +#4364 = CARTESIAN_POINT ( 'NONE', ( 7.069978253601706600, 13.53172188900974300, -20.77441040866286700 ) ) ; +#4365 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 2.370875771962970700, 16.95638256154236200 ) ) ; +#4366 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002000, -1.147542621945963500, -24.19086389933257000 ) ) ; +#4367 = ORIENTED_EDGE ( 'NONE', *, *, #265, .T. ) ; +#4368 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999994000, 11.58968375916183100, -55.35516255565663400 ) ) ; +#4369 = EDGE_CURVE ( 'NONE', #4723, #542, #1217, .T. ) ; +#4370 = CARTESIAN_POINT ( 'NONE', ( 1.528926313943756300, 14.45614021845624600, -25.66651943943662000 ) ) ; +#4371 = VERTEX_POINT ( 'NONE', #2564 ) ; +#4372 = CARTESIAN_POINT ( 'NONE', ( 6.711634457106264900, -5.374527737597685700, 17.50704611799607900 ) ) ; +#4373 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1628, #3656, #2832 ), + ( #399, #3251, #814 ), + ( #3667, #1229, #4081 ), + ( #1640, #4481, #2040 ), + ( #4870, #2458, #5285 ), + ( #2849, #414, #3270 ), + ( #832, #3682, #1247 ), + ( #4097, #1656, #4492 ), + ( #2058, #4882, #2472 ), + ( #8, #2867, #432 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0005592429056310852600, 0.001118485811262170500, 0.001677728716893255800, 0.002236971622524341000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865595600, 1.000000000000000000), + ( 1.000000000000000000, 0.7212587151347335000, 1.000000000000000000), + ( 1.000000000000000000, 0.7359157255566720600, 1.000000000000000000), + ( 1.000000000000000000, 0.7662726429596201600, 1.000000000000000000), + ( 1.000000000000000000, 0.7812632132599638400, 1.000000000000000000), + ( 1.000000000000000000, 0.8098274713663781200, 1.000000000000000000), + ( 1.000000000000000000, 0.8228000573434172100, 1.000000000000000000), + ( 1.000000000000000000, 0.8437974917256926300, 1.000000000000000000), + ( 1.000000000000000000, 0.8513893087021269200, 1.000000000000000000), + ( 1.000000000000000000, 0.8546452472470430500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4374 = ORIENTED_EDGE ( 'NONE', *, *, #2581, .F. ) ; +#4375 = ORIENTED_EDGE ( 'NONE', *, *, #911, .T. ) ; +#4376 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.340986170762068500, 17.41688509028392700 ) ) ; +#4377 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666666100, 2.612651188657561200, -30.32807655698928100 ) ) ; +#4378 = ORIENTED_EDGE ( 'NONE', *, *, #4556, .F. ) ; +#4380 = CARTESIAN_POINT ( 'NONE', ( 19.35923699728373400, 7.848783069637248900, 17.80887397500196200 ) ) ; +#4379 = CARTESIAN_POINT ( 'NONE', ( 4.583781389809260500, 1.951605110364496500, -25.61679960318523900 ) ) ; +#4381 = ORIENTED_EDGE ( 'NONE', *, *, #2137, .T. ) ; +#4382 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.391663890638808400, 16.63498794369948500 ) ) ; +#4383 = CARTESIAN_POINT ( 'NONE', ( 17.44842982761079900, 3.424630570331299600, -30.32056799808295000 ) ) ; +#4384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4385 = CARTESIAN_POINT ( 'NONE', ( 9.042309003083230900, 11.03380612867485400, -20.90607087944613000 ) ) ; +#4386 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 5.040792486620813600, 17.69676883205245600 ) ) ; +#4387 = ORIENTED_EDGE ( 'NONE', *, *, #2635, .T. ) ; +#4388 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.709269841782313100, 16.93242356500262200 ) ) ; +#4389 = AXIS2_PLACEMENT_3D ( 'NONE', #1968, #4796, #2377 ) ; +#4390 = CARTESIAN_POINT ( 'NONE', ( 6.872352358174182100, 10.00000000000000400, 20.00000000000001400 ) ) ; +#4391 = CARTESIAN_POINT ( 'NONE', ( 2.487300000000000300, 11.76974228483278200, -56.08856557165454100 ) ) ; +#4392 = CARTESIAN_POINT ( 'NONE', ( 13.06064153317646300, -9.999999999999998200, 12.52113835550195700 ) ) ; +#4393 = CARTESIAN_POINT ( 'NONE', ( 7.718748412532660200, 20.89586979920969900, -60.27843168674937100 ) ) ; +#4394 = CIRCLE ( 'NONE', #525, 0.9999999999999995600 ) ; +#4395 = ORIENTED_EDGE ( 'NONE', *, *, #2286, .F. ) ; +#4396 = ORIENTED_EDGE ( 'NONE', *, *, #4291, .F. ) ; +#4397 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4398 = ORIENTED_EDGE ( 'NONE', *, *, #2581, .T. ) ; +#4399 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.258686208197977900, -29.95633160533158400 ) ) ; +#4400 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 21.94881216480664300, -55.95727739431293200 ) ) ; +#4401 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#4402 = CIRCLE ( 'NONE', #1637, 2.500000000000000900 ) ; +#4403 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.061616997868381200E-016, 2.500000000000002200 ) ) ; +#4404 = EDGE_CURVE ( 'NONE', #3287, #4936, #4323, .T. ) ; +#4405 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ; +#4406 = EDGE_CURVE ( 'NONE', #4074, #227, #2151, .T. ) ; +#4407 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333322600, 10.93120901305858300, -55.53160033211129600 ) ) ; +#4408 = CARTESIAN_POINT ( 'NONE', ( 3.959034460317577800, 8.363762760724357600, 20.63419500261630500 ) ) ; +#4409 = CARTESIAN_POINT ( 'NONE', ( 18.24109450680948500, 14.51727022832084300, -26.81524872350238900 ) ) ; +#4410 = FACE_OUTER_BOUND ( 'NONE', #1815, .T. ) ; +#4411 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666600, 21.37922248559115300, -52.73206355963677100 ) ) ; +#4412 = CARTESIAN_POINT ( 'NONE', ( 9.651650001637120700, 26.06004701540012300, -59.26148301863729300 ) ) ; +#4413 = LINE ( 'NONE', #5100, #3319 ) ; +#4414 = AXIS2_PLACEMENT_3D ( 'NONE', #3908, #3059, #4700 ) ; +#4415 = TOROIDAL_SURFACE ( 'NONE', #5218, 5.123724356957928300, 1.000000000000000000 ) ; +#4416 = CARTESIAN_POINT ( 'NONE', ( 17.45300465411990100, 2.060583700454316200, -30.66870928187291400 ) ) ; +#4417 = DIRECTION ( 'NONE', ( 1.795917894276921800E-016, -0.2588190451025136300, 0.9659258262890702000 ) ) ; +#4418 = VECTOR ( 'NONE', #2179, 1000.000000000000000 ) ; +#4419 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.76229753958166100, -55.93449070603136900 ) ) ; +#4420 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 9.000000000000005300, 15.31390237722978900 ) ) ; +#4421 = AXIS2_PLACEMENT_3D ( 'NONE', #2540, #4240, #1801 ) ; +#4422 = FACE_OUTER_BOUND ( 'NONE', #4185, .T. ) ; +#4423 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 11.81382236340611400, -56.23255212013585700 ) ) ; +#4424 = CARTESIAN_POINT ( 'NONE', ( 18.26309180650246900, 14.64412237690425500, -27.35768060393641600 ) ) ; +#4425 = CARTESIAN_POINT ( 'NONE', ( 10.55429410113757500, 23.48738583920699000, -64.28159322190776900 ) ) ; +#4426 = VERTEX_POINT ( 'NONE', #104 ) ; +#4427 = AXIS2_PLACEMENT_3D ( 'NONE', #1726, #4560, #2129 ) ; +#4428 = CARTESIAN_POINT ( 'NONE', ( 16.82534232504313100, 3.142638607130431100, -27.56982136267119200 ) ) ; +#4429 = ORIENTED_EDGE ( 'NONE', *, *, #3466, .T. ) ; +#4430 = CARTESIAN_POINT ( 'NONE', ( 2.819445924096784400, 3.508986349822848600, -28.21216975615568100 ) ) ; +#4431 = ORIENTED_EDGE ( 'NONE', *, *, #3783, .T. ) ; +#4432 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#4433 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4434 = ADVANCED_FACE ( 'NONE', ( #93 ), #3186, .T. ) ; +#4435 = EDGE_CURVE ( 'NONE', #4523, #3752, #3688, .T. ) ; +#4436 = VERTEX_POINT ( 'NONE', #4590 ) ; +#4437 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999949800, 23.06031837628118100, -54.15612476712217900 ) ) ; +#4438 = EDGE_LOOP ( 'NONE', ( #2853, #2405, #863, #4884 ) ) ; +#4439 = CARTESIAN_POINT ( 'NONE', ( 2.878132188134542100, 7.500000000000003600, 16.46446609406728000 ) ) ; +#4440 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002900, -19.75971928798615100, -31.08096380043232500 ) ) ; +#4441 = CC_DESIGN_APPROVAL ( #4160, ( #3897 ) ) ; +#4442 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999995800, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#4443 = EDGE_CURVE ( 'NONE', #5264, #3937, #1082, .T. ) ; +#4444 = ORIENTED_EDGE ( 'NONE', *, *, #255, .F. ) ; +#4445 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4446 = CARTESIAN_POINT ( 'NONE', ( 12.17904795680408700, 20.89574932854536000, -60.27866890227791400 ) ) ; +#4447 = EDGE_LOOP ( 'NONE', ( #1336, #2691, #2073, #3635 ) ) ; +#4448 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1949, #717, #2362 ), + ( #5185, #2756, #322 ), + ( #3167, #737, #3595 ), + ( #1157, #4009, #1566 ), + ( #4408, #1969, #4799 ), + ( #2379, #5203, #2774 ), + ( #339, #3189, #756 ), + ( #3609, #1173, #4028 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -3.469446951953614200E-018, 0.002666560641940059800, 0.003999840962910091200, 0.005333121283880123100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7860350693180036000, 1.000000000000000000), + ( 1.000000000000000000, 0.7921730114225362700, 1.000000000000000000), + ( 1.000000000000000000, 0.7995216482410277800, 1.000000000000000000), + ( 1.000000000000000000, 0.8145547252858932300, 1.000000000000000000), + ( 1.000000000000000000, 0.8202420635027325400, 1.000000000000000000), + ( 1.000000000000000000, 0.8335822993782298100, 1.000000000000000000), + ( 1.000000000000000000, 0.8412434971081957900, 1.000000000000000000), + ( 1.000000000000000000, 0.8502655191830104100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4449 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#4450 = ORIENTED_EDGE ( 'NONE', *, *, #4868, .F. ) ; +#4451 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -4.999999999999999100, 12.50000000000000000 ) ) ; +#4452 = CARTESIAN_POINT ( 'NONE', ( 5.281972922924028400, -4.999999999999998200, 17.50000000000000000 ) ) ; +#4453 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890699800, -0.2588190451025143600 ) ) ; +#4454 = ORIENTED_EDGE ( 'NONE', *, *, #4541, .T. ) ; +#4455 = ORIENTED_EDGE ( 'NONE', *, *, #5077, .F. ) ; +#4456 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 23.22519872755273700, -56.85711359142335700 ) ) ; +#4457 = CARTESIAN_POINT ( 'NONE', ( 18.36902852881454600, 10.00000000000000200, 17.89504286779637000 ) ) ; +#4458 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999999400, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#4459 = LINE ( 'NONE', #1325, #2289 ) ; +#4460 = AXIS2_PLACEMENT_3D ( 'NONE', #465, #3322, #885 ) ; +#4461 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 23.22519872755273700, -56.85711359142335700 ) ) ; +#4462 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 22.50000000000004300 ) ) ; +#4463 = VERTEX_POINT ( 'NONE', #4718 ) ; +#4464 = CARTESIAN_POINT ( 'NONE', ( 12.83040859061672200, 24.55839146509573500, -59.08694895060667600 ) ) ; +#4465 = ADVANCED_FACE ( 'NONE', ( #3094 ), #2344, .T. ) ; +#4466 = CIRCLE ( 'NONE', #2513, 10.00000000000000500 ) ; +#4467 = EDGE_LOOP ( 'NONE', ( #1403, #928 ) ) ; +#4468 = EDGE_CURVE ( 'NONE', #1078, #682, #2959, .T. ) ; +#4469 = CYLINDRICAL_SURFACE ( 'NONE', #4818, 0.9999999999999994400 ) ; +#4470 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.4104047869209420100, 0.9119034547979169000 ) ) ; +#4471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#4472 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#4473 = EDGE_CURVE ( 'NONE', #4975, #4486, #1900, .T. ) ; +#4474 = CIRCLE ( 'NONE', #5107, 10.00000000000000500 ) ; +#4475 = CARTESIAN_POINT ( 'NONE', ( 19.01391396350518900, 7.964072047460229300, 17.99137691712848100 ) ) ; +#4476 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4477 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 6.182485924565440900, 17.15619054393200200 ) ) ; +#4478 = CARTESIAN_POINT ( 'NONE', ( 18.68693447853213400, 8.089255650988798500, 18.23223304703364200 ) ) ; +#4479 = CARTESIAN_POINT ( 'NONE', ( 10.84930616570162000, 11.03125286337652300, -20.89540096236425600 ) ) ; +#4480 = LINE ( 'NONE', #1966, #2305 ) ; +#4481 = CARTESIAN_POINT ( 'NONE', ( 7.536457257140207900E-015, 9.613100895800142700, 16.39997667394910500 ) ) ; +#4482 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766149200, 24.01142209705488600, -59.79133915250318400 ) ) ; +#4483 = AXIS2_PLACEMENT_3D ( 'NONE', #2878, #3715, #1272 ) ; +#4484 = CIRCLE ( 'NONE', #3670, 2.500000000000000900 ) ; +#4485 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.22771491430602400, -23.40969935769456700 ) ) ; +#4486 = VERTEX_POINT ( 'NONE', #4958 ) ; +#4487 = ADVANCED_FACE ( 'NONE', ( #3952 ), #3361, .F. ) ; +#4488 = AXIS2_PLACEMENT_3D ( 'NONE', #1438, #4272, #1834 ) ; +#4489 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#4490 = ORIENTED_EDGE ( 'NONE', *, *, #1360, .F. ) ; +#4491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9119034547979171200, -0.4104047869209411200 ) ) ; +#4492 = CARTESIAN_POINT ( 'NONE', ( 0.5762320265093114900, 8.453563414175034700, 17.66509082459923600 ) ) ; +#4493 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 23.04549627076574900, -60.05015819760571800 ) ) ; +#4494 = AXIS2_PLACEMENT_3D ( 'NONE', #4166, #1730, #4565 ) ; +#4495 = VERTEX_POINT ( 'NONE', #4327 ) ; +#4496 = ORIENTED_EDGE ( 'NONE', *, *, #4793, .F. ) ; +#4497 = EDGE_LOOP ( 'NONE', ( #4684, #20, #3785, #4568 ) ) ; +#4498 = EDGE_CURVE ( 'NONE', #2845, #4504, #940, .T. ) ; +#4499 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999906100, 14.82799353773741500, -24.44327457806944200 ) ) ; +#4500 = VERTEX_POINT ( 'NONE', #4969 ) ; +#4501 = CARTESIAN_POINT ( 'NONE', ( 0.6312351613477031900, 1.225488468465857800, 17.70272997841150400 ) ) ; +#4502 = EDGE_CURVE ( 'NONE', #4965, #5172, #4780, .T. ) ; +#4503 = CARTESIAN_POINT ( 'NONE', ( 12.61937767842068900, 14.25846326964808100, -66.15178625118650800 ) ) ; +#4504 = VERTEX_POINT ( 'NONE', #2146 ) ; +#4505 = CARTESIAN_POINT ( 'NONE', ( 14.19717165613919500, 14.32320817860370500, -61.03876167593219300 ) ) ; +#4506 = ORIENTED_EDGE ( 'NONE', *, *, #366, .F. ) ; +#4507 = PLANE ( 'NONE', #4483 ) ; +#4508 = AXIS2_PLACEMENT_3D ( 'NONE', #2230, #5053, #2630 ) ; +#4509 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#4510 = ADVANCED_FACE ( 'NONE', ( #1763 ), #45, .T. ) ; +#4511 = ORIENTED_EDGE ( 'NONE', *, *, #3365, .T. ) ; +#4512 = CIRCLE ( 'NONE', #1363, 2.500000000000000400 ) ; +#4513 = VERTEX_POINT ( 'NONE', #134 ) ; +#4514 = ORIENTED_EDGE ( 'NONE', *, *, #1678, .F. ) ; +#4515 = AXIS2_PLACEMENT_3D ( 'NONE', #4076, #1634, #4476 ) ; +#4516 = CARTESIAN_POINT ( 'NONE', ( 18.25377782896364600, 14.48108568689681700, -26.53907804002929900 ) ) ; +#4517 = FACE_OUTER_BOUND ( 'NONE', #1574, .T. ) ; +#4518 = VERTEX_POINT ( 'NONE', #551 ) ; +#4519 = CARTESIAN_POINT ( 'NONE', ( 8.082453966536324000, 14.57667203645104000, -66.38795555873758800 ) ) ; +#4520 = CARTESIAN_POINT ( 'NONE', ( 12.02986468876721400, 11.15039627628177100, -62.98686549832183300 ) ) ; +#4521 = SPHERICAL_SURFACE ( 'NONE', #2960, 2.500000000000000000 ) ; +#4522 = CARTESIAN_POINT ( 'NONE', ( 14.89928256540437300, -1.519806935941950600, -23.62012073531006000 ) ) ; +#4523 = VERTEX_POINT ( 'NONE', #3409 ) ; +#4524 = LINE ( 'NONE', #2282, #3584 ) ; +#4525 = EDGE_CURVE ( 'NONE', #3218, #2761, #4990, .T. ) ; +#4526 = VECTOR ( 'NONE', #2660, 1000.000000000000000 ) ; +#4527 = VECTOR ( 'NONE', #3862, 1000.000000000000000 ) ; +#4528 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 13.14722090442170600, -62.70239308847840200 ) ) ; +#4529 = DIRECTION ( 'NONE', ( 1.325001034533938900E-016, -1.625531029949085900E-016, -1.000000000000000000 ) ) ; +#4530 = ADVANCED_FACE ( 'NONE', ( #4879 ), #1658, .T. ) ; +#4531 = AXIS2_PLACEMENT_3D ( 'NONE', #258, #3097, #668 ) ; +#4532 = EDGE_CURVE ( 'NONE', #4074, #209, #2720, .T. ) ; +#4533 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338501700, 12.18129507813263500, -62.96121213358091500 ) ) ; +#4534 = CARTESIAN_POINT ( 'NONE', ( 12.05968793118018000, 14.49354103054146700, -66.32948662355087800 ) ) ; +#4535 = CIRCLE ( 'NONE', #1804, 102.4994838187113700 ) ; +#4536 = CARTESIAN_POINT ( 'NONE', ( 0.4959935460047527100, 7.376451720291414400, 17.86136112981886400 ) ) ; +#4537 = CARTESIAN_POINT ( 'NONE', ( 12.18486294355678200, 13.46872856747733700, -20.54943470859939200 ) ) ; +#4538 = CARTESIAN_POINT ( 'NONE', ( 19.37665527009897600, 2.303978661730087500, 17.82722781659288100 ) ) ; +#4539 = TOROIDAL_SURFACE ( 'NONE', #5208, 10.00000000000000400, 2.500000000000000000 ) ; +#4540 = ORIENTED_EDGE ( 'NONE', *, *, #1877, .T. ) ; +#4541 = EDGE_CURVE ( 'NONE', #2568, #4551, #1727, .T. ) ; +#4542 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 21.41460684483187300, -54.88531142074779000 ) ) ; +#4543 = ORIENTED_EDGE ( 'NONE', *, *, #4553, .F. ) ; +#4544 = AXIS2_PLACEMENT_3D ( 'NONE', #1070, #3920, #1487 ) ; +#4545 = VERTEX_POINT ( 'NONE', #4636 ) ; +#4546 = CARTESIAN_POINT ( 'NONE', ( 9.722735132265896100, 15.56254490949215400, -62.05523667299009100 ) ) ; +#4547 = ORIENTED_EDGE ( 'NONE', *, *, #4584, .F. ) ; +#4548 = CARTESIAN_POINT ( 'NONE', ( 14.19822191497112000, 11.33220780667602800, -22.12198084941360700 ) ) ; +#4549 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.000000000000003600, 15.31390237722978900 ) ) ; +#4550 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4551 = VERTEX_POINT ( 'NONE', #5035 ) ; +#4552 = ADVANCED_FACE ( 'NONE', ( #685 ), #3696, .T. ) ; +#4553 = EDGE_CURVE ( 'NONE', #2473, #3255, #3236, .T. ) ; +#4554 = VERTEX_POINT ( 'NONE', #1411 ) ; +#4555 = ORIENTED_EDGE ( 'NONE', *, *, #1759, .T. ) ; +#4556 = EDGE_CURVE ( 'NONE', #1829, #2145, #3811, .T. ) ; +#4557 = ORIENTED_EDGE ( 'NONE', *, *, #3161, .T. ) ; +#4558 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143600, 0.9659258262890700900 ) ) ; +#4559 = CARTESIAN_POINT ( 'NONE', ( 9.221088782437293600, 10.50435437045063500, -63.42701701903308000 ) ) ; +#4560 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#4561 = AXIS2_PLACEMENT_3D ( 'NONE', #223, #1476, #5108 ) ; +#4562 = ORIENTED_EDGE ( 'NONE', *, *, #3923, .F. ) ; +#4563 = ORIENTED_EDGE ( 'NONE', *, *, #2012, .T. ) ; +#4564 = CARTESIAN_POINT ( 'NONE', ( 17.36412819956136400, 4.069445156859048400, -29.22107509648133200 ) ) ; +#4565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890698700, -0.2588190451025151900 ) ) ; +#4566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9119034547979186800, -0.4104047869209376300 ) ) ; +#4567 = FACE_BOUND ( 'NONE', #659, .T. ) ; +#4568 = ORIENTED_EDGE ( 'NONE', *, *, #4613, .F. ) ; +#4569 = FACE_OUTER_BOUND ( 'NONE', #1258, .T. ) ; +#4570 = AXIS2_PLACEMENT_3D ( 'NONE', #2655, #213, #3056 ) ; +#4571 = ORIENTED_EDGE ( 'NONE', *, *, #1235, .T. ) ; +#4572 = ADVANCED_FACE ( 'NONE', ( #544 ), #1890, .T. ) ; +#4573 = VECTOR ( 'NONE', #2654, 1000.000000000000000 ) ; +#4574 = CARTESIAN_POINT ( 'NONE', ( 6.137196456586884200, 13.67794936262423800, -65.62132409098738600 ) ) ; +#4575 = CARTESIAN_POINT ( 'NONE', ( 7.707036250207888600, 15.12250419413280000, -61.83216708374079200 ) ) ; +#4576 = SHAPE_DEFINITION_REPRESENTATION ( #817, #2086 ) ; +#4577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#4578 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 22.25927290126366700, -57.11593263652586900 ) ) ; +#4579 = FACE_OUTER_BOUND ( 'NONE', #3359, .T. ) ; +#4580 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -7.266997467134923600, -12.80949600363866200 ) ) ; +#4581 = CARTESIAN_POINT ( 'NONE', ( 9.586977918441016700, 23.47221089945070500, -64.30888758317459500 ) ) ; +#4582 = EDGE_CURVE ( 'NONE', #2896, #3087, #1534, .T. ) ; +#4583 = CIRCLE ( 'NONE', #1742, 4.999999999999997300 ) ; +#4584 = EDGE_CURVE ( 'NONE', #3006, #4299, #434, .T. ) ; +#4585 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.258686208197959300, -29.95633160533156000 ) ) ; +#4586 = CARTESIAN_POINT ( 'NONE', ( 5.335283447464457000, 14.18999878101187700, -60.79853810614572800 ) ) ; +#4587 = ORIENTED_EDGE ( 'NONE', *, *, #4045, .F. ) ; +#4588 = CARTESIAN_POINT ( 'NONE', ( 14.55963350260900500, 14.19079380107874200, -60.80150520246996100 ) ) ; +#4589 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000600, -88.81885793164890700, -72.39384004447242700 ) ) ; +#4590 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.000000000000003600, 5.665249758739323100 ) ) ; +#4591 = CARTESIAN_POINT ( 'NONE', ( 14.02388125752148300, 24.09363242135118500, -62.63328890359905200 ) ) ; +#4592 = CARTESIAN_POINT ( 'NONE', ( 6.872352358174181200, 7.500000000000003600, 20.00000000000001400 ) ) ; +#4593 = ADVANCED_FACE ( 'NONE', ( #4751 ), #2460, .T. ) ; +#4594 = ORIENTED_EDGE ( 'NONE', *, *, #3855, .F. ) ; +#4595 = CARTESIAN_POINT ( 'NONE', ( 5.984733905932705200, 5.000000000000000900, 20.00000000000000400 ) ) ; +#4596 = ORIENTED_EDGE ( 'NONE', *, *, #3007, .F. ) ; +#4597 = ORIENTED_EDGE ( 'NONE', *, *, #4644, .T. ) ; +#4598 = PLANE ( 'NONE', #866 ) ; +#4599 = CARTESIAN_POINT ( 'NONE', ( 18.43729307757482200, 14.45147811001904300, -25.26995554917162300 ) ) ; +#4600 = ORIENTED_EDGE ( 'NONE', *, *, #2324, .F. ) ; +#4601 = VERTEX_POINT ( 'NONE', #1505 ) ; +#4602 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 10.00000000000000200, 5.665249758739323100 ) ) ; +#4603 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.22771491430602400, -23.40969935769457100 ) ) ; +#4604 = EDGE_LOOP ( 'NONE', ( #4944, #5249, #3548 ) ) ; +#4605 = CARTESIAN_POINT ( 'NONE', ( 18.36915555732870000, 1.915068061621003200, -29.41546637839609300 ) ) ; +#4606 = CARTESIAN_POINT ( 'NONE', ( 2.168404344971011600E-016, 0.4654998936849552000, -27.35715002713493500 ) ) ; +#4607 = CARTESIAN_POINT ( 'NONE', ( 1.642976736431236000, 14.57685249890585100, -27.08394412555694000 ) ) ; +#4608 = VERTEX_POINT ( 'NONE', #2277 ) ; +#4609 = EDGE_CURVE ( 'NONE', #4500, #3254, #3956, .T. ) ; +#4610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.881784197001252300E-016, 1.000000000000000000 ) ) ; +#4611 = CARTESIAN_POINT ( 'NONE', ( 15.77887550889403600, -1.251176386437432600, -24.10313170044468100 ) ) ; +#4612 = ORIENTED_EDGE ( 'NONE', *, *, #5077, .T. ) ; +#4613 = EDGE_CURVE ( 'NONE', #2094, #2555, #2483, .T. ) ; +#4614 = ADVANCED_FACE ( 'NONE', ( #1395 ), #3419, .F. ) ; +#4615 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4616 = VERTEX_POINT ( 'NONE', #5159 ) ; +#4617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4618 = DIRECTION ( 'NONE', ( -2.372850496293450900E-016, 0.4104047869209427900, -0.9119034547979164600 ) ) ; +#4619 = AXIS2_PLACEMENT_3D ( 'NONE', #4943, #2531, #68 ) ; +#4620 = CIRCLE ( 'NONE', #1046, 2.500000000000000000 ) ; +#4621 = DIRECTION ( 'NONE', ( -0.6484729204542115700, 0.0000000000000000000, -0.7612377233411293800 ) ) ; +#4622 = DIRECTION ( 'NONE', ( 0.7500000000000066600, 0.1711927069771139700, -0.6388998803238565800 ) ) ; +#4623 = ORIENTED_EDGE ( 'NONE', *, *, #3123, .F. ) ; +#4624 = CARTESIAN_POINT ( 'NONE', ( 1.529244442672243100, 1.915068061623999700, -29.41546637839945100 ) ) ; +#4625 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4626 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.674647099076365100, -30.76687062793714800 ) ) ; +#4627 = FACE_OUTER_BOUND ( 'NONE', #3502, .T. ) ; +#4628 = ORIENTED_EDGE ( 'NONE', *, *, #4525, .T. ) ; +#4629 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.162264728904462000E-013, -1.000000000000000000 ) ) ; +#4630 = AXIS2_PLACEMENT_3D ( 'NONE', #5146, #280, #1906 ) ; +#4631 = VECTOR ( 'NONE', #1568, 1000.000000000000000 ) ; +#4632 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 17.50000000000000000 ) ) ; +#4633 = CIRCLE ( 'NONE', #3025, 0.9999999999999998900 ) ; +#4634 = DIRECTION ( 'NONE', ( 1.387778780781445700E-015, -0.9659258262890698700, -0.2588190451025151900 ) ) ; +#4635 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, -1.960684027114955500, -0.5253637016780401400 ) ) ; +#4636 = CARTESIAN_POINT ( 'NONE', ( 5.500377052683337100, 8.614757265557774000, 21.76776695296905800 ) ) ; +#4637 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999500, 19.91601454391051700, -54.16632834935786200 ) ) ; +#4638 = CARTESIAN_POINT ( 'NONE', ( 9.494291402463835200, 11.02441465720867900, -20.86592804654561200 ) ) ; +#4639 = VECTOR ( 'NONE', #491, 1000.000000000000000 ) ; +#4640 = ADVANCED_FACE ( 'NONE', ( #306 ), #2061, .T. ) ; +#4641 = CARTESIAN_POINT ( 'NONE', ( 0.9874812476517904600, 10.00000000000000200, 15.30943332998659800 ) ) ; +#4642 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.96819975629100700, -27.83096491734441700 ) ) ; +#4643 = DIRECTION ( 'NONE', ( 0.6131176017962897100, 0.0000000000000000000, -0.7899916495555926500 ) ) ; +#4644 = EDGE_CURVE ( 'NONE', #763, #547, #2351, .T. ) ; +#4645 = CARTESIAN_POINT ( 'NONE', ( 14.19285189030044600, 21.19501796497477700, -59.20033126072264900 ) ) ; +#4646 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333326800, 14.65750343616706700, -27.64626655298182100 ) ) ; +#4647 = VECTOR ( 'NONE', #3476, 1000.000000000000000 ) ; +#4648 = EDGE_CURVE ( 'NONE', #2914, #1595, #2387, .T. ) ; +#4649 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 22.25927290126367100, -57.11593263652589100 ) ) ; +#4650 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#4651 = VERTEX_POINT ( 'NONE', #2730 ) ; +#4652 = AXIS2_PLACEMENT_3D ( 'NONE', #1060, #3914, #1480 ) ; +#4653 = CARTESIAN_POINT ( 'NONE', ( 2.487300000000001200, 4.292876200220353800, -29.64181049816156500 ) ) ; +#4654 = CARTESIAN_POINT ( 'NONE', ( 19.11831632490396200, 7.925951633723680200, 17.92326621286790500 ) ) ; +#4655 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4656 = ORIENTED_EDGE ( 'NONE', *, *, #4105, .T. ) ; +#4657 = CARTESIAN_POINT ( 'NONE', ( 18.75330237952244200, 0.7411525351693797300, -27.90362600191061700 ) ) ; +#4658 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.298510400299580200E-032, -1.325001034533938900E-016 ) ) ; +#4659 = ORIENTED_EDGE ( 'NONE', *, *, #220, .F. ) ; +#4660 = DIRECTION ( 'NONE', ( -2.671813387426240400E-016, 0.2588190451025143600, -0.9659258262890700900 ) ) ; +#4661 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#4662 = CARTESIAN_POINT ( 'NONE', ( -4.260238382025495300E-014, 2.260092994754047300, 17.54268287008388300 ) ) ; +#4663 = ORIENTED_EDGE ( 'NONE', *, *, #3659, .F. ) ; +#4664 = AXIS2_PLACEMENT_3D ( 'NONE', #2705, #273, #3114 ) ; +#4665 = CARTESIAN_POINT ( 'NONE', ( 6.881620353577472000, 21.05820174256463800, -59.91821890459086600 ) ) ; +#4666 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.81382236340609800, -56.23255212013580700 ) ) ; +#4667 = ORIENTED_EDGE ( 'NONE', *, *, #3123, .T. ) ; +#4668 = ORIENTED_EDGE ( 'NONE', *, *, #980, .T. ) ; +#4669 = EDGE_LOOP ( 'NONE', ( #1190, #3030, #1521, #2130 ) ) ; +#4670 = ORIENTED_EDGE ( 'NONE', *, *, #3963, .T. ) ; +#4671 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999000, 11.76974228483276800, -56.08856557165452000 ) ) ; +#4672 = AXIS2_PLACEMENT_3D ( 'NONE', #4940, #3747, #1714 ) ; +#4673 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4674 = CARTESIAN_POINT ( 'NONE', ( 4.706449661237959100E-013, 10.76071891149044300, -58.73459230702904700 ) ) ; +#4675 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.674647099076118600, -30.76687062793725500 ) ) ; +#4676 = ORIENTED_EDGE ( 'NONE', *, *, #2363, .F. ) ; +#4677 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 19.72107233223578100, -53.43679973948975700 ) ) ; +#4678 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143000 ) ) ; +#4679 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -2.312964634635743900E-016 ) ) ; +#4680 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4478, #1603, #811, #2037, #4866, #2456, #5282, #2847 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002799519711045352700, 0.004199279566568031400, 0.005599039422090711400 ), + .UNSPECIFIED. ) ; +#4681 = FACE_OUTER_BOUND ( 'NONE', #1218, .T. ) ; +#4682 = EDGE_CURVE ( 'NONE', #4035, #4975, #2591, .T. ) ; +#4683 = CARTESIAN_POINT ( 'NONE', ( 13.02604764182307100, 10.00000000000000400, 20.00000000000214900 ) ) ; +#4684 = ORIENTED_EDGE ( 'NONE', *, *, #1351, .F. ) ; +#4685 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.038302160957315800, 17.19569460725401600 ) ) ; +#4686 = ORIENTED_EDGE ( 'NONE', *, *, #882, .T. ) ; +#4687 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 19.85087708119871100, -53.92323202904125900 ) ) ; +#4688 = CARTESIAN_POINT ( 'NONE', ( 18.59387173425257000, 11.16750992577276600, -58.73093678053680100 ) ) ; +#4689 = CIRCLE ( 'NONE', #3955, 0.5800000000000006300 ) ; +#4690 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #4341, #4090, ( #3897 ) ) ; +#4691 = EDGE_CURVE ( 'NONE', #3295, #2803, #4816, .T. ) ; +#4692 = ORIENTED_EDGE ( 'NONE', *, *, #4691, .T. ) ; +#4693 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000002200, 0.4654998936849596400, -27.35715002713493900 ) ) ; +#4694 = VECTOR ( 'NONE', #5129, 1000.000000000000000 ) ; +#4695 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.86462033434383500, -56.52640883701020200 ) ) ; +#4696 = ORIENTED_EDGE ( 'NONE', *, *, #4584, .T. ) ; +#4697 = CARTESIAN_POINT ( 'NONE', ( 14.61642707707597200, -4.999999999999998200, 17.50000000000000000 ) ) ; +#4698 = FACE_OUTER_BOUND ( 'NONE', #1137, .T. ) ; +#4699 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4700 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4701 = CARTESIAN_POINT ( 'NONE', ( 17.34911841590539400, 8.195636103950304700, 19.44857012941796600 ) ) ; +#4702 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#4703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890706400, -0.2588190451025122500 ) ) ; +#4704 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4705 = FACE_OUTER_BOUND ( 'NONE', #3876, .T. ) ; +#4706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#4707 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766140300, 13.40741737109299000, -20.21665475151214500 ) ) ; +#4708 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4709 = TOROIDAL_SURFACE ( 'NONE', #3139, 10.00000000000000000, 2.500000000000000000 ) ; +#4710 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#4711 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 18.09635858759372700, -61.37627564304205000 ) ) ; +#4713 = CARTESIAN_POINT ( 'NONE', ( 0.5747574994029250900, 8.438216624448326500, 17.67093621693165400 ) ) ; +#4712 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.610433777350927200, -56.61344415056143500 ) ) ; +#4714 = EDGE_CURVE ( 'NONE', #3349, #3856, #4394, .T. ) ; +#4715 = CARTESIAN_POINT ( 'NONE', ( 18.20925185259710600, 14.53774733546271500, -27.10065340880573700 ) ) ; +#4716 = DIRECTION ( 'NONE', ( -0.6306019374818705400, -0.7761064337087479900, 0.0000000000000000000 ) ) ; +#4717 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 4.292876200220364400, -29.64181049816160400 ) ) ; +#4718 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999500, 13.40741737109299000, -20.21665475151214500 ) ) ; +#4719 = CARTESIAN_POINT ( 'NONE', ( 10.52920000000000100, 5.000000000000000000, 22.50000000000000400 ) ) ; +#4720 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9659258262890686500, -0.2588190451025191300 ) ) ; +#4721 = EDGE_CURVE ( 'NONE', #1002, #3755, #4512, .T. ) ; +#4722 = CARTESIAN_POINT ( 'NONE', ( 9.647183215092017200, 12.80489637438699000, -17.85307992702170000 ) ) ; +#4723 = VERTEX_POINT ( 'NONE', #4919 ) ; +#4724 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 18.09635858759372700, -61.37627564304205000 ) ) ; +#4725 = AXIS2_PLACEMENT_3D ( 'NONE', #5029, #2612, #168 ) ; +#4726 = VERTEX_POINT ( 'NONE', #892 ) ; +#4727 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4728 = ORIENTED_EDGE ( 'NONE', *, *, #5124, .T. ) ; +#4729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4730 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -9.184850993605144000E-016, 7.500000000000000000 ) ) ; +#4731 = EDGE_LOOP ( 'NONE', ( #891, #4295, #3678, #3022 ) ) ; +#4732 = CARTESIAN_POINT ( 'NONE', ( 2.461911958856282100, 12.78543819147377800, -55.55664666472201700 ) ) ; +#4733 = ORIENTED_EDGE ( 'NONE', *, *, #1239, .F. ) ; +#4734 = CARTESIAN_POINT ( 'NONE', ( 5.694077489218509300, 11.33328059915543100, -22.12614356172237300 ) ) ; +#4735 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, -1.457153238772571200, 17.50000000000000000 ) ) ; +#4736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025143600 ) ) ; +#4737 = AXIS2_PLACEMENT_3D ( 'NONE', #738, #3596, #1160 ) ; +#4738 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 2.612651188657587800, -30.32807655698930600 ) ) ; +#4739 = CARTESIAN_POINT ( 'NONE', ( 5.334988583021930400, 21.19042934330961000, -58.92250917088337300 ) ) ; +#4740 = VERTEX_POINT ( 'NONE', #2860 ) ; +#4741 = CARTESIAN_POINT ( 'NONE', ( -1.301042606982605300E-015, 15.97827867187474200, -26.56442273453173500 ) ) ; +#4742 = CARTESIAN_POINT ( 'NONE', ( 5.281972922924028400, -9.999999999999998200, 17.50000000000000000 ) ) ; +#4743 = ORIENTED_EDGE ( 'NONE', *, *, #3050, .T. ) ; +#4744 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 8.847791768918279200, 16.04435452916442600 ) ) ; +#4745 = AXIS2_PLACEMENT_3D ( 'NONE', #2517, #2120, #4945 ) ; +#4746 = ORIENTED_EDGE ( 'NONE', *, *, #1478, .F. ) ; +#4747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890706400, 0.2588190451025122500 ) ) ; +#4748 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3394, #124, #3808 ), + ( #1379, #4213, #1773 ), + ( #4607, #2183, #5005 ), + ( #2590, #138, #2986 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.008475508232904419400, 0.009486132116794344600 ), + ( 0.4660998205150203000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.8577841975454660900, 0.8474406165857437700, 1.000000000000000000), + ( 0.8577857440425169500, 0.8474422755619789300, 1.000000000000000000), + ( 0.8565832154156072200, 0.8461522851200378200, 1.000000000000000000), + ( 0.8542265893537611700, 0.8436242579055646100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4750 = CARTESIAN_POINT ( 'NONE', ( 19.21696695296635900, 5.000000000000001800, 18.23223304703364200 ) ) ; +#4749 = CARTESIAN_POINT ( 'NONE', ( 3.132948151701783900, 0.8088461176220160800, -28.02845031438704400 ) ) ; +#4751 = FACE_OUTER_BOUND ( 'NONE', #3582, .T. ) ; +#4752 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4753 = EDGE_LOOP ( 'NONE', ( #1009, #4733, #2264, #1987 ) ) ; +#4754 = ORIENTED_EDGE ( 'NONE', *, *, #1943, .T. ) ; +#4755 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.76230194526970000, -55.93451621441195700 ) ) ; +#4756 = EDGE_CURVE ( 'NONE', #3144, #836, #3301, .T. ) ; +#4757 = CARTESIAN_POINT ( 'NONE', ( 6.979683009514620700, 12.90466210848755500, -18.26253715042030400 ) ) ; +#4758 = EDGE_CURVE ( 'NONE', #3685, #4651, #2207, .T. ) ; +#4759 = CARTESIAN_POINT ( 'NONE', ( 19.37548674214150400, 2.226242674034102400, 17.82598754161730900 ) ) ; +#4760 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002900, -0.6762444647246262900, -24.64441778288743400 ) ) ; +#4761 = VECTOR ( 'NONE', #1766, 1000.000000000000000 ) ; +#4762 = CARTESIAN_POINT ( 'NONE', ( 13.91366609406729400, 5.000000000000000000, 20.00000000000000400 ) ) ; +#4763 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333506900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#4764 = VERTEX_POINT ( 'NONE', #484 ) ; +#4765 = CARTESIAN_POINT ( 'NONE', ( 1.192526347276481700E-013, 15.25090407209133000, -25.29003308047556300 ) ) ; +#4766 = CARTESIAN_POINT ( 'NONE', ( 8.290307369099904700, -9.999999999999328500, 16.96943761211205300 ) ) ; +#4767 = AXIS2_PLACEMENT_3D ( 'NONE', #3444, #583, #4617 ) ; +#4768 = VECTOR ( 'NONE', #1166, 999.9999999999998900 ) ; +#4769 = EDGE_LOOP ( 'NONE', ( #1889, #4663, #4405, #1653 ) ) ; +#4770 = CARTESIAN_POINT ( 'NONE', ( 19.34803229458321300, 8.158611682433489800, 17.76544693352785100 ) ) ; +#4771 = DATE_AND_TIME ( #561, #1672 ) ; +#4772 = CIRCLE ( 'NONE', #4737, 0.9999999999999990000 ) ; +#4774 = CARTESIAN_POINT ( 'NONE', ( -0.05080000000000584000, -88.81885793164890700, -72.39384004447242700 ) ) ; +#4773 = CARTESIAN_POINT ( 'NONE', ( 2.795308519775424800, -0.7040974145758831500, -25.10892480948328800 ) ) ; +#4775 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 7.896534461666328200, 16.90261481451889100 ) ) ; +#4776 = CARTESIAN_POINT ( 'NONE', ( 18.24084379818191300, 2.604806657878242500, -30.33070071354236700 ) ) ; +#4777 = AXIS2_PLACEMENT_3D ( 'NONE', #5280, #2844, #528 ) ; +#4778 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4779 = LINE ( 'NONE', #79, #1419 ) ; +#4780 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3376, #2562, #3790, #1353, #4190, #1755 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001791495265806641000, 0.003582990531613281900 ), + .UNSPECIFIED. ) ; +#4781 = CARTESIAN_POINT ( 'NONE', ( 9.489670463515922800, 13.38149023766529000, -20.23459208293777300 ) ) ; +#4782 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 6.182485924556013800, 17.15619054515968900 ) ) ; +#4783 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 8.072138051126922100, 16.83448030209102700 ) ) ; +#4784 = VECTOR ( 'NONE', #3377, 1000.000000000000100 ) ; +#4785 = CARTESIAN_POINT ( 'NONE', ( 13.18676554289373500, -5.374527737597685700, 17.50704611799607900 ) ) ; +#4786 = CARTESIAN_POINT ( 'NONE', ( 6.975264550010632700, 23.87172406293267500, -63.41907344630287500 ) ) ; +#4787 = AXIS2_PLACEMENT_3D ( 'NONE', #4462, #2440, #1210 ) ; +#4788 = CARTESIAN_POINT ( 'NONE', ( 18.75542605862441500, 11.26025114003892500, -59.43008500050430600 ) ) ; +#4789 = FACE_OUTER_BOUND ( 'NONE', #1960, .T. ) ; +#4790 = CARTESIAN_POINT ( 'NONE', ( 13.02604764182587300, 7.500000000000003600, 19.99999999999997200 ) ) ; +#4791 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999944800, 1.363080471932255800, -31.33380214771007400 ) ) ; +#4792 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ; +#4793 = EDGE_CURVE ( 'NONE', #1644, #1800, #1271, .T. ) ; +#4794 = DIRECTION ( 'NONE', ( -1.734723475976806800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4795 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4796 = DIRECTION ( 'NONE', ( -2.981679935612492900E-015, -0.2588190451025037500, 0.9659258262890729800 ) ) ; +#4797 = ORIENTED_EDGE ( 'NONE', *, *, #2913, .T. ) ; +#4798 = AXIS2_PLACEMENT_3D ( 'NONE', #689, #3547, #1109 ) ; +#4799 = CARTESIAN_POINT ( 'NONE', ( 5.502758036707797700, 10.00000000000000400, 18.86642805059982200 ) ) ; +#4800 = CARTESIAN_POINT ( 'NONE', ( 4.014947643163914400, 8.371511705137784500, 20.67902238073809300 ) ) ; +#4801 = EDGE_CURVE ( 'NONE', #1310, #1875, #4247, .T. ) ; +#4802 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000052500, 23.04995650009659900, -52.51745862834118800 ) ) ; +#4803 = ORIENTED_EDGE ( 'NONE', *, *, #5041, .F. ) ; +#4804 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.000000000000005300, -7.499999999999998200 ) ) ; +#4805 = CARTESIAN_POINT ( 'NONE', ( 9.493623458032555400, 20.64044964336720200, -60.68385313398028600 ) ) ; +#4806 = VERTEX_POINT ( 'NONE', #4954 ) ; +#4807 = ORIENTED_EDGE ( 'NONE', *, *, #2641, .T. ) ; +#4808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#4809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4810 = EDGE_LOOP ( 'NONE', ( #3848, #2486, #3072, #1572, #3428 ) ) ; +#4811 = CARTESIAN_POINT ( 'NONE', ( 6.599071340064698800E-014, 9.377008447894404200, -56.18111401710324800 ) ) ; +#4812 = ORIENTED_EDGE ( 'NONE', *, *, #17, .F. ) ; +#4813 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.162264728904459700E-013 ) ) ; +#4814 = CARTESIAN_POINT ( 'NONE', ( 16.56357827766149500, 21.59660753133214000, -60.43838676525947300 ) ) ; +#4815 = ORIENTED_EDGE ( 'NONE', *, *, #2585, .F. ) ; +#4816 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4, #4877, #425, #3279, #844, #3694, #1253, #4106, #1666, #4503, #2066, #4895, #2480, #19, #2875, #442, #3292, #857, #3712, #1269, #4118, #1679, #4519, #2082, #4906, #2497, #35, #2886, #455, #3310, #870, #3728, #1289, #4130, #1691, #4533 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002073778315922732500, 0.003110667473884110500, 0.004147556631845488400, 0.005184445789806866800, 0.006221334947768245200, 0.007258224105729623600, 0.008295113263691001100, 0.008813557842671690700, 0.009332002421652378600, 0.009850447000633066500, 0.01036889157961375600, 0.01140578073757514800, 0.01244266989553654100, 0.01347955905349793000, 0.01451644821145932400, 0.01555333736942071500, 0.01659022652738211000 ), + .UNSPECIFIED. ) ; +#4817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9853853318533087900, 0.1703400944239041900 ) ) ; +#4818 = AXIS2_PLACEMENT_3D ( 'NONE', #1466, #4281, #4302 ) ; +#4819 = CARTESIAN_POINT ( 'NONE', ( 2.487299999999999400, 12.73833325550376800, -27.37885710048672300 ) ) ; +#4820 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, 12.86864632802633100, -27.86319773673684700 ) ) ; +#4821 = CARTESIAN_POINT ( 'NONE', ( 1.004063213332367300, 8.006825569790144900, 18.06416896941138700 ) ) ; +#4822 = CARTESIAN_POINT ( 'NONE', ( 10.24593316331193700, 26.06082150087064200, -59.26122804673413200 ) ) ; +#4823 = CIRCLE ( 'NONE', #2715, 5.123724356957924700 ) ; +#4824 = ADVANCED_FACE ( 'NONE', ( #5194 ), #4937, .F. ) ; +#4825 = ORIENTED_EDGE ( 'NONE', *, *, #5008, .T. ) ; +#4826 = ORIENTED_EDGE ( 'NONE', *, *, #2441, .F. ) ; +#4827 = CARTESIAN_POINT ( 'NONE', ( 16.76545184829495500, 0.8088461176266312800, -28.02845031438295500 ) ) ; +#4828 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2287, #225, #3084, #656 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0008417482326424741000 ), + .UNSPECIFIED. ) ; +#4829 = CIRCLE ( 'NONE', #2851, 0.5800000000000006300 ) ; +#4830 = EDGE_CURVE ( 'NONE', #4016, #2703, #37, .T. ) ; +#4831 = CARTESIAN_POINT ( 'NONE', ( 2.534271800438633100, 4.069445156859043100, -29.22107509648127900 ) ) ; +#4832 = ORIENTED_EDGE ( 'NONE', *, *, #403, .F. ) ; +#4834 = CARTESIAN_POINT ( 'NONE', ( 6.044178794641861300, -5.221104768607067300, 17.50000000000000400 ) ) ; +#4833 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 1.609990704036850600, 16.81510998235430100 ) ) ; +#4835 = CYLINDRICAL_SURFACE ( 'NONE', #3151, 1.000000000000000400 ) ; +#4836 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 21.53450604537008000, -55.15877621098968600 ) ) ; +#4837 = EDGE_CURVE ( 'NONE', #1702, #614, #3021, .T. ) ; +#4838 = ORIENTED_EDGE ( 'NONE', *, *, #3307, .T. ) ; +#4839 = DIRECTION ( 'NONE', ( -0.6859943405700382700, 0.0000000000000000000, 0.7276068751089962400 ) ) ; +#4840 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.53817565076308000, -24.56835459990753600 ) ) ; +#4841 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333326800, 14.65750343616706700, -27.64626655298182100 ) ) ; +#4842 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4843 = CARTESIAN_POINT ( 'NONE', ( -0.05079999999999330900, -1.960684027114955000, -0.5253637016780399200 ) ) ; +#4844 = TOROIDAL_SURFACE ( 'NONE', #2098, 101.4290542974443400, 1.000000000000000000 ) ; +#4845 = CARTESIAN_POINT ( 'NONE', ( 12.92233060910100100, 23.87154933981612400, -63.41958202333756800 ) ) ; +#4846 = LINE ( 'NONE', #349, #2675 ) ; +#4848 = CARTESIAN_POINT ( 'NONE', ( 9.154289272218827400, -5.690355937288491500, 17.52394423124949800 ) ) ; +#4847 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890699800, 0.2588190451025145200 ) ) ; +#4849 = ADVANCED_FACE ( 'NONE', ( #4132 ), #4929, .T. ) ; +#4850 = AXIS2_PLACEMENT_3D ( 'NONE', #2785, #352, #3204 ) ; +#4851 = FACE_OUTER_BOUND ( 'NONE', #3353, .T. ) ; +#4852 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4853 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 21.76776695296636200 ) ) ; +#4854 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666667000, 21.66487829819825700, -53.52313491720793300 ) ) ; +#4855 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3626, #2772, #4840, #2417 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.003577852324868811800 ), + .UNSPECIFIED. ) ; +#4856 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -88.81885793164890700, -72.39384004447242700 ) ) ; +#4857 = CARTESIAN_POINT ( 'NONE', ( 13.61848170290666500, 21.14649371969089100, -59.57030359580517100 ) ) ; +#4858 = ORIENTED_EDGE ( 'NONE', *, *, #3404, .T. ) ; +#4860 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333357400, 3.023894846702077600, -31.05974356099690300 ) ) ; +#4859 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, 12.65496680558645800, -55.06972082365661000 ) ) ; +#4861 = EDGE_CURVE ( 'NONE', #1823, #4965, #761, .T. ) ; +#4862 = ORIENTED_EDGE ( 'NONE', *, *, #297, .T. ) ; +#4863 = ORIENTED_EDGE ( 'NONE', *, *, #4004, .F. ) ; +#4864 = CARTESIAN_POINT ( 'NONE', ( 17.58832088718086000, 10.00000000000000200, 15.98275383403129100 ) ) ; +#4865 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 4.657035876501097100, 17.19065370105807800 ) ) ; +#4866 = CARTESIAN_POINT ( 'NONE', ( 15.88341980209578900, 8.371516408069007700, 20.67904800830567800 ) ) ; +#4867 = CARTESIAN_POINT ( 'NONE', ( 12.17686342233445800, 11.09646088210685900, -21.17157453395843800 ) ) ; +#4868 = EDGE_CURVE ( 'NONE', #4296, #3223, #1827, .T. ) ; +#4869 = ORIENTED_EDGE ( 'NONE', *, *, #2521, .F. ) ; +#4870 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.759847042702622500, 16.20941206712913600 ) ) ; +#4871 = ORIENTED_EDGE ( 'NONE', *, *, #2046, .F. ) ; +#4872 = ADVANCED_FACE ( 'NONE', ( #5050 ), #70, .T. ) ; +#4873 = ORIENTED_EDGE ( 'NONE', *, *, #4861, .T. ) ; +#4874 = ORIENTED_EDGE ( 'NONE', *, *, #4155, .T. ) ; +#4875 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5076, #2255, #1049, #3905 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.003592701358280501400 ), + .UNSPECIFIED. ) ; +#4876 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#4877 = CARTESIAN_POINT ( 'NONE', ( 16.17075384923651900, 12.33281961381225300, -63.52670939933050000 ) ) ; +#4878 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.298510400299580200E-032, 1.325001034533938900E-016 ) ) ; +#4879 = FACE_OUTER_BOUND ( 'NONE', #202, .T. ) ; +#4880 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#4881 = VERTEX_POINT ( 'NONE', #2586 ) ; +#4882 = CARTESIAN_POINT ( 'NONE', ( -2.031560424415732000E-014, 8.077161772820838700, 17.49781021144937700 ) ) ; +#4883 = CIRCLE ( 'NONE', #4427, 1.000000000000000900 ) ; +#4884 = ORIENTED_EDGE ( 'NONE', *, *, #1175, .F. ) ; +#4885 = EDGE_CURVE ( 'NONE', #1517, #2587, #1610, .T. ) ; +#4886 = CIRCLE ( 'NONE', #247, 1.000000000000000900 ) ; +#4887 = ORIENTED_EDGE ( 'NONE', *, *, #464, .T. ) ; +#4888 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 13.57864624801072800, -25.46720037356150000 ) ) ; +#4889 = CARTESIAN_POINT ( 'NONE', ( 0.8404827637153691200, -0.3819405765522760300, 17.53656904729838600 ) ) ; +#4890 = ADVANCED_FACE ( 'NONE', ( #610 ), #641, .T. ) ; +#4891 = PERSON_AND_ORGANIZATION ( #4449, #3515 ) ; +#4892 = AXIS2_PLACEMENT_3D ( 'NONE', #2589, #136, #2985 ) ; +#4893 = EDGE_CURVE ( 'NONE', #209, #3707, #4823, .T. ) ; +#4894 = VECTOR ( 'NONE', #4234, 1000.000000000000000 ) ; +#4895 = CARTESIAN_POINT ( 'NONE', ( 11.67124949544723300, 14.63043598371340400, -66.42687574920154200 ) ) ; +#4896 = CARTESIAN_POINT ( 'NONE', ( 15.61316220816896700, 12.62365785718284500, -64.17796273553096900 ) ) ; +#4897 = CARTESIAN_POINT ( 'NONE', ( 13.02604764182587300, 7.500000000000003600, 19.99999999999997200 ) ) ; +#4898 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4899 = FACE_OUTER_BOUND ( 'NONE', #18, .T. ) ; +#4900 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 18.09635858759372700, -61.37627564304205000 ) ) ; +#4901 = FACE_OUTER_BOUND ( 'NONE', #4174, .T. ) ; +#4902 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #458, #4536, #52, #2904, #473, #3328 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 3.818975762833147800E-016, 0.001430412184389004800, 0.002860824368777627900 ), + .UNSPECIFIED. ) ; +#4903 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 15.97827867187475100, -26.56442273453176400 ) ) ; +#4904 = LINE ( 'NONE', #591, #1684 ) ; +#4905 = AXIS2_PLACEMENT_3D ( 'NONE', #4423, #1989, #4817 ) ; +#4906 = CARTESIAN_POINT ( 'NONE', ( 7.301443761255733900, 14.26866787712019000, -66.15997619515741200 ) ) ; +#4907 = CARTESIAN_POINT ( 'NONE', ( 12.39088234650747500, 15.04501966200125700, -61.77449952899660000 ) ) ; +#4908 = ORIENTED_EDGE ( 'NONE', *, *, #752, .T. ) ; +#4909 = CARTESIAN_POINT ( 'NONE', ( 13.66176192405328000, 1.224881419885547100, -24.49898180325884300 ) ) ; +#4910 = ADVANCED_FACE ( 'NONE', ( #1713 ), #123, .T. ) ; +#4911 = EDGE_LOOP ( 'NONE', ( #166, #2839, #354, #46, #3686 ) ) ; +#4912 = EDGE_LOOP ( 'NONE', ( #2068, #3813, #3348, #3998, #1665 ) ) ; +#4913 = ORIENTED_EDGE ( 'NONE', *, *, #440, .F. ) ; +#4914 = EDGE_CURVE ( 'NONE', #2803, #4504, #2647, .T. ) ; +#4915 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9659258262890706400, 0.2588190451025122500 ) ) ; +#4916 = ORIENTED_EDGE ( 'NONE', *, *, #3161, .F. ) ; +#4917 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4918 = EDGE_CURVE ( 'NONE', #3744, #2434, #3754, .T. ) ; +#4919 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.061616997868382300E-015, -12.50000000000000000 ) ) ; +#4920 = ORIENTED_EDGE ( 'NONE', *, *, #139, .F. ) ; +#4921 = CARTESIAN_POINT ( 'NONE', ( 10.36584066697710000, 10.25888301581666300, -63.50181746460472700 ) ) ; +#4922 = ORIENTED_EDGE ( 'NONE', *, *, #2946, .T. ) ; +#4923 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999997600, -18.31287684118413500, -36.48065332244486600 ) ) ; +#4924 = CARTESIAN_POINT ( 'NONE', ( 13.20017449394376100, 12.92974054747959500, -18.36338921118004900 ) ) ; +#4925 = CARTESIAN_POINT ( 'NONE', ( 19.47916974060344900, 3.920272591339395000, 17.96896954490140900 ) ) ; +#4926 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 10.00000000000000200, 5.665249758739323100 ) ) ; +#4927 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4928 = ORIENTED_EDGE ( 'NONE', *, *, #464, .F. ) ; +#4929 = CONICAL_SURFACE ( 'NONE', #2172, 4.999999999999998200, 0.7853981633974437300 ) ; +#4930 = VERTEX_POINT ( 'NONE', #2166 ) ; +#4931 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2474, #2060, #3284, #849, #3702, #1261, #4111, #1671 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002666560641937871000, 0.003999840962906810000, 0.005333121283875749000 ), + .UNSPECIFIED. ) ; +#4932 = ORIENTED_EDGE ( 'NONE', *, *, #3855, .T. ) ; +#4933 = CARTESIAN_POINT ( 'NONE', ( 1.528962492363190200, 22.19460005169954500, -54.54705932881398000 ) ) ; +#4934 = ADVANCED_FACE ( 'NONE', ( #4020 ), #3413, .T. ) ; +#4935 = CYLINDRICAL_SURFACE ( 'NONE', #1501, 5.000000000000000000 ) ; +#4936 = VERTEX_POINT ( 'NONE', #2182 ) ; +#4937 = PLANE ( 'NONE', #2466 ) ; +#4938 = CARTESIAN_POINT ( 'NONE', ( 9.647246843021019200, 14.90792038536784500, -66.60445523421428500 ) ) ; +#4939 = AXIS2_PLACEMENT_3D ( 'NONE', #1785, #4618, #2194 ) ; +#4940 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999994000, -11.59115779176004500, -61.56645032909980800 ) ) ; +#4941 = FACE_OUTER_BOUND ( 'NONE', #1004, .T. ) ; +#4942 = CARTESIAN_POINT ( 'NONE', ( 14.57380716029658400, 13.80888281987347500, -21.74328672289157500 ) ) ; +#4943 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 12.44149154480392000, -20.47547379661466100 ) ) ; +#4944 = ORIENTED_EDGE ( 'NONE', *, *, #1761, .T. ) ; +#4945 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4946 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4947 = CIRCLE ( 'NONE', #1565, 100.7154346165994700 ) ; +#4948 = EDGE_CURVE ( 'NONE', #2896, #2668, #3634, .T. ) ; +#4949 = CIRCLE ( 'NONE', #1172, 2.499999999999997800 ) ; +#4950 = CYLINDRICAL_SURFACE ( 'NONE', #1851, 1.000000000000000900 ) ; +#4951 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.2254395020074278500, 16.50000000000000000 ) ) ; +#4952 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #5287, #1651, ( #3897 ) ) ; +#4953 = EDGE_CURVE ( 'NONE', #3437, #287, #1594, .T. ) ; +#4954 = CARTESIAN_POINT ( 'NONE', ( 9.949199999983481000, 11.02205614447058200, -20.85581036584218100 ) ) ; +#4955 = CARTESIAN_POINT ( 'NONE', ( 8.149397648158673800, 15.26667697343648400, -61.91114308590154300 ) ) ; +#4956 = VECTOR ( 'NONE', #4678, 1000.000000000000100 ) ; +#4957 = PLANE ( 'NONE', #5228 ) ; +#4958 = CARTESIAN_POINT ( 'NONE', ( 4.949199999999994000, -10.00000000000000200, 7.500000000000000000 ) ) ; +#4959 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 4.292876200220364400, -29.64181049816160400 ) ) ; +#4960 = CARTESIAN_POINT ( 'NONE', ( 4.848982579324073500, 24.21837655669428800, -61.67084283114290600 ) ) ; +#4961 = CIRCLE ( 'NONE', #5094, 102.4994838187113800 ) ; +#4962 = ADVANCED_FACE ( 'NONE', ( #4681 ), #4245, .T. ) ; +#4963 = ORIENTED_EDGE ( 'NONE', *, *, #5011, .F. ) ; +#4964 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4965 = VERTEX_POINT ( 'NONE', #571 ) ; +#4966 = CARTESIAN_POINT ( 'NONE', ( 7.604856021165591800, 11.22745555605669800, -62.87820792199244100 ) ) ; +#4967 = CARTESIAN_POINT ( 'NONE', ( 8.797972408191794700, 15.43898372094098900, -61.99986069167813700 ) ) ; +#4968 = ORIENTED_EDGE ( 'NONE', *, *, #3974, .F. ) ; +#4969 = CARTESIAN_POINT ( 'NONE', ( 17.02026781186545500, 10.00000000000000400, 16.46446609406728000 ) ) ; +#4970 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, 5.000000000000000900, 22.50000000000004300 ) ) ; +#4971 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8074441630149897800, -0.5899440004042949500 ) ) ; +#4972 = CARTESIAN_POINT ( 'NONE', ( 10.29036387568545600, 23.47659888436904700, -64.30090403859944100 ) ) ; +#4973 = VERTEX_POINT ( 'NONE', #1010 ) ; +#4974 = EDGE_CURVE ( 'NONE', #2014, #1446, #2536, .T. ) ; +#4975 = VERTEX_POINT ( 'NONE', #589 ) ; +#4976 = ORIENTED_EDGE ( 'NONE', *, *, #3727, .T. ) ; +#4977 = EDGE_CURVE ( 'NONE', #4723, #3414, #1461, .T. ) ; +#4978 = ADVANCED_FACE ( 'NONE', ( #486 ), #3450, .T. ) ; +#4979 = ORIENTED_EDGE ( 'NONE', *, *, #1796, .T. ) ; +#4980 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.410334924661421000, -30.21987352632028800 ) ) ; +#4981 = CARTESIAN_POINT ( 'NONE', ( 3.797206644263059000, 12.35965124726541800, -63.62684641862806200 ) ) ; +#4982 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #707, #3136, #1125, #3980, #1542, #4380 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.006523666965407187400, 0.007954874916543709700, 0.009386082867680233700 ), + .UNSPECIFIED. ) ; +#4983 = CARTESIAN_POINT ( 'NONE', ( 19.35923699728373400, 7.848783069637248900, 17.80887397500196200 ) ) ; +#4984 = AXIS2_PLACEMENT_3D ( 'NONE', #1405, #4238, #1799 ) ; +#4985 = EDGE_LOOP ( 'NONE', ( #2638, #884, #3804, #2261 ) ) ; +#4986 = DIRECTION ( 'NONE', ( -1.387778780781445700E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4987 = CARTESIAN_POINT ( 'NONE', ( 18.89840000000399200, 0.4654998936773646100, -27.35715002711991400 ) ) ; +#4988 = CARTESIAN_POINT ( 'NONE', ( 14.79745350963726700, 24.19980449833025900, -61.92912330680474000 ) ) ; +#4989 = DIRECTION ( 'NONE', ( 3.469446951953616200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4990 = CIRCLE ( 'NONE', #373, 2.500000000000000000 ) ; +#4991 = EDGE_LOOP ( 'NONE', ( #3401, #5097, #4832, #3290 ) ) ; +#4992 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4993 = FACE_OUTER_BOUND ( 'NONE', #3870, .T. ) ; +#4994 = EDGE_LOOP ( 'NONE', ( #89, #1778, #3152, #1454 ) ) ; +#4995 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999981100, 10.00000000000000200, 15.31390237722991000 ) ) ; +#4996 = CARTESIAN_POINT ( 'NONE', ( 18.29301602166258100, 14.46798247630318600, -26.19694881606893600 ) ) ; +#4997 = LINE ( 'NONE', #1613, #3962 ) ; +#4998 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666600, 10.93120901305857900, -55.53160033211128200 ) ) ; +#4999 = AXIS2_PLACEMENT_3D ( 'NONE', #923, #3780, #1343 ) ; +#5000 = PERSON_AND_ORGANIZATION ( #4449, #3515 ) ; +#5001 = CARTESIAN_POINT ( 'NONE', ( 9.949199999999999400, 5.000000000000000000, 20.00000000000000000 ) ) ; +#5002 = CIRCLE ( 'NONE', #3675, 0.9999999999999991100 ) ; +#5003 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 2.621293852006505000, -28.94241537950280100 ) ) ; +#5004 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.629197898627449100, -27.44374670139961500 ) ) ; +#5005 = CARTESIAN_POINT ( 'NONE', ( 2.462089024456399800, 12.80282133642777300, -27.61952988988499800 ) ) ; +#5006 = ADVANCED_FACE ( 'NONE', ( #369 ), #5061, .F. ) ; +#5007 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.86092389579697600, -53.49652112167969900 ) ) ; +#5008 = EDGE_CURVE ( 'NONE', #1517, #1649, #2500, .T. ) ; +#5009 = FACE_OUTER_BOUND ( 'NONE', #3746, .T. ) ; +#5010 = CARTESIAN_POINT ( 'NONE', ( 16.89582528585079000, -0.8042243584574699800, -24.92226460970057600 ) ) ; +#5011 = EDGE_CURVE ( 'NONE', #3295, #4074, #325, .T. ) ; +#5012 = CIRCLE ( 'NONE', #834, 7.500000000000003600 ) ; +#5013 = CARTESIAN_POINT ( 'NONE', ( 19.94919999999999800, -88.81885793164890700, -72.39384004447242700 ) ) ; +#5014 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.000000000000005300, 15.31390237722978800 ) ) ; +#5015 = AXIS2_PLACEMENT_3D ( 'NONE', #2651, #207, #3053 ) ; +#5016 = CARTESIAN_POINT ( 'NONE', ( 18.19786666686994200, 11.00353179564421600, -55.80151263203663300 ) ) ; +#5017 = FACE_OUTER_BOUND ( 'NONE', #2043, .T. ) ; +#5018 = CARTESIAN_POINT ( 'NONE', ( 10.84843355693663400, 11.03122773325285000, -20.89529343317616000 ) ) ; +#5019 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3160, #2749, #4400, #1961 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.003577852324868759800 ), + .UNSPECIFIED. ) ; +#5020 = CARTESIAN_POINT ( 'NONE', ( 7.204503593490739000E-013, 1.241988926541589100, -30.55360690546666200 ) ) ; +#5021 = CARTESIAN_POINT ( 'NONE', ( 5.330327021823468000, 11.39984501703739500, -22.38355098919663500 ) ) ; +#5022 = EDGE_LOOP ( 'NONE', ( #1570, #161, #3934, #4543 ) ) ; +#5023 = AXIS2_PLACEMENT_3D ( 'NONE', #3797, #1365, #4204 ) ; +#5024 = CARTESIAN_POINT ( 'NONE', ( 17.43650001184191800, 12.80330487804017600, -27.62133449684279200 ) ) ; +#5025 = ORIENTED_EDGE ( 'NONE', *, *, #1519, .T. ) ; +#5026 = ORIENTED_EDGE ( 'NONE', *, *, #1235, .F. ) ; +#5027 = ADVANCED_FACE ( 'NONE', ( #1417 ), #3443, .T. ) ; +#5028 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5029 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 9.154085150328956600, -46.14206906555681100 ) ) ; +#5030 = ORIENTED_EDGE ( 'NONE', *, *, #49, .F. ) ; +#5031 = CARTESIAN_POINT ( 'NONE', ( 13.71919885409037600, 10.00000000000000500, 19.44428600556623400 ) ) ; +#5032 = ORIENTED_EDGE ( 'NONE', *, *, #366, .T. ) ; +#5033 = VERTEX_POINT ( 'NONE', #2679 ) ; +#5034 = CARTESIAN_POINT ( 'NONE', ( 14.94920000000000300, 1.437486186627976400, -25.37941695385609700 ) ) ; +#5035 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666667000, 14.65750343616706700, -27.64626655298182500 ) ) ; +#5036 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -88.81885793164890700, -72.39384004447242700 ) ) ; +#5037 = EDGE_LOOP ( 'NONE', ( #1440, #2214, #670, #3473, #3185 ) ) ; +#5038 = DIRECTION ( 'NONE', ( 1.387778780781444700E-015, -0.9659258262890706400, -0.2588190451025121900 ) ) ; +#5039 = CARTESIAN_POINT ( 'NONE', ( 9.949199999983481000, 11.02205614447058200, -20.85581036584218100 ) ) ; +#5040 = ORIENTED_EDGE ( 'NONE', *, *, #638, .T. ) ; +#5041 = EDGE_CURVE ( 'NONE', #4726, #4513, #4413, .T. ) ; +#5042 = CARTESIAN_POINT ( 'NONE', ( 0.1535028623010460100, 7.732650233843879000, 17.65471666499330200 ) ) ; +#5043 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.457153238772571200, 16.50000000000000000 ) ) ; +#5044 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999992300, 19.72107233223432800, -53.43679973949013400 ) ) ; +#5045 = CARTESIAN_POINT ( 'NONE', ( 13.01892826072236900, 21.05859999975236400, -59.91717125457199000 ) ) ; +#5046 = ORIENTED_EDGE ( 'NONE', *, *, #3812, .F. ) ; +#5047 = AXIS2_PLACEMENT_3D ( 'NONE', #2333, #5160, #2732 ) ; +#5048 = EDGE_CURVE ( 'NONE', #2112, #5236, #179, .T. ) ; +#5049 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #119, #3358, #84, #532 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009065014181572177100 ), + .UNSPECIFIED. ) ; +#5050 = FACE_OUTER_BOUND ( 'NONE', #4361, .T. ) ; +#5051 = CARTESIAN_POINT ( 'NONE', ( 0.5391630027160876400, 7.848783069637552700, 17.80887397500164900 ) ) ; +#5052 = ORIENTED_EDGE ( 'NONE', *, *, #1065, .T. ) ; +#5053 = DIRECTION ( 'NONE', ( -0.1006687319876455600, 0.2575042443533943600, -0.9610189230915212600 ) ) ; +#5054 = VERTEX_POINT ( 'NONE', #649 ) ; +#5055 = CARTESIAN_POINT ( 'NONE', ( 3.469446951953614200E-015, 11.39507170863057400, -60.02698657250110900 ) ) ; +#5056 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5057 = CIRCLE ( 'NONE', #5116, 1.000000000000000700 ) ; +#5058 = CARTESIAN_POINT ( 'NONE', ( 18.26309118210494400, 21.43888472202809900, -52.71607711156485700 ) ) ; +#5059 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5060 = VERTEX_POINT ( 'NONE', #4717 ) ; +#5061 = PLANE ( 'NONE', #3726 ) ; +#5062 = CARTESIAN_POINT ( 'NONE', ( 14.39802294731750200, 8.614757265557617700, 21.76776695296850800 ) ) ; +#5063 = CARTESIAN_POINT ( 'NONE', ( 0.4441030851726300300, 3.420281843435289700, 17.93324955198682600 ) ) ; +#5064 = ORIENTED_EDGE ( 'NONE', *, *, #1710, .T. ) ; +#5065 = CARTESIAN_POINT ( 'NONE', ( 5.705593483251773200, 21.19508319409314400, -59.20043306027012200 ) ) ; +#5066 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.735146250361316000, -56.83104828783292800 ) ) ; +#5067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#5068 = AXIS2_PLACEMENT_3D ( 'NONE', #665, #3525, #1088 ) ; +#5069 = CIRCLE ( 'NONE', #165, 5.000000000000000000 ) ; +#5070 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 4.292876200220364400, -29.64181049816160400 ) ) ; +#5071 = CARTESIAN_POINT ( 'NONE', ( 18.25546838513524500, 11.01168525837077400, -56.09312669958944800 ) ) ; +#5072 = LINE ( 'NONE', #4403, #2923 ) ; +#5073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2588190451025143000, 0.9659258262890700900 ) ) ; +#5074 = CARTESIAN_POINT ( 'NONE', ( 1.478343607779037500, 11.13529887537128500, -57.81115539897867000 ) ) ; +#5075 = VECTOR ( 'NONE', #5175, 1000.000000000000000 ) ; +#5076 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.258686208197953500, -29.95633160533156000 ) ) ; +#5077 = EDGE_CURVE ( 'NONE', #1647, #1078, #1292, .T. ) ; +#5078 = CARTESIAN_POINT ( 'NONE', ( 17.43634513109431000, 20.85639684094332600, -53.39550203546163200 ) ) ; +#5079 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5080 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 1.358343471931528800, -26.90678312694817000 ) ) ; +#5081 = VECTOR ( 'NONE', #3037, 1000.000000000000000 ) ; +#5082 = CARTESIAN_POINT ( 'NONE', ( 14.39332086881339000, 9.999999999998445700, 20.97356877171789000 ) ) ; +#5083 = CARTESIAN_POINT ( 'NONE', ( 4.153934751885095400E-014, 6.234566519324903100, 17.67027947139619200 ) ) ; +#5084 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #2952, #520 ) ; +#5085 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5086 = CARTESIAN_POINT ( 'NONE', ( 19.89840000000000200, 11.91547931057084000, -56.82061839399755600 ) ) ; +#5087 = EDGE_CURVE ( 'NONE', #4486, #1446, #2229, .T. ) ; +#5088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#5089 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 12.11954090822549400, -58.59897251822734200 ) ) ; +#5090 = LINE ( 'NONE', #1852, #2930 ) ; +#5091 = CARTESIAN_POINT ( 'NONE', ( 14.94919999999999900, -4.999999999999997300, 7.499999999999998200 ) ) ; +#5092 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#5093 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999998500, 12.93424423647693200, -28.10801246388829000 ) ) ; +#5094 = AXIS2_PLACEMENT_3D ( 'NONE', #1514, #4351, #1908 ) ; +#5095 = CARTESIAN_POINT ( 'NONE', ( 3.903127820947816000E-015, 9.610433777350930700, -56.61344415056143500 ) ) ; +#5096 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -3.673940397442059200E-015, -7.500000000000000000 ) ) ; +#5097 = ORIENTED_EDGE ( 'NONE', *, *, #3404, .F. ) ; +#5098 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000200, -88.81885793164890700, -72.39384004447242700 ) ) ; +#5099 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -2.994639546929047700, -0.8024112482219204500 ) ) ; +#5100 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, 19.65596328590101600, -53.19380947054323600 ) ) ; +#5101 = ORIENTED_EDGE ( 'NONE', *, *, #3753, .F. ) ; +#5102 = CARTESIAN_POINT ( 'NONE', ( 14.90998370824612200, 21.11132182176492800, -58.62727584096747100 ) ) ; +#5103 = CARTESIAN_POINT ( 'NONE', ( 11.81520003589090500, 4.999999999999991100, -22.46941544652791100 ) ) ; +#5104 = CARTESIAN_POINT ( 'NONE', ( 15.72146375217727000, 10.00000000000000200, 17.68080317731742600 ) ) ; +#5105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5106 = ORIENTED_EDGE ( 'NONE', *, *, #1674, .T. ) ; +#5107 = AXIS2_PLACEMENT_3D ( 'NONE', #2309, #5140, #2707 ) ; +#5108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5109 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -8.074441630149902200, -13.39944000404294900 ) ) ; +#5110 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.68991880571509900, -52.91676192399935300 ) ) ; +#5111 = ORIENTED_EDGE ( 'NONE', *, *, #752, .F. ) ; +#5112 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333334100, 14.65750343616706200, -27.64626655298182800 ) ) ; +#5113 = VERTEX_POINT ( 'NONE', #2694 ) ; +#5114 = VERTEX_POINT ( 'NONE', #1506 ) ; +#5115 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 11.39507170863056000, -60.02698657250108000 ) ) ; +#5116 = AXIS2_PLACEMENT_3D ( 'NONE', #3632, #1193, #4050 ) ; +#5117 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.44149154480392200, -20.47547379661466100 ) ) ; +#5118 = TOROIDAL_SURFACE ( 'NONE', #4767, 101.4290542974443400, 1.000000000000000000 ) ; +#5119 = CARTESIAN_POINT ( 'NONE', ( 0.5391630027160876400, 7.848783069637552700, 17.80887397500164900 ) ) ; +#5120 = ORIENTED_EDGE ( 'NONE', *, *, #2173, .F. ) ; +#5121 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999843200, 16.21170400142945700, -26.99675286799292100 ) ) ; +#5122 = CARTESIAN_POINT ( 'NONE', ( 2.878132188134543900, 10.00000000000000200, 16.46446609406728000 ) ) ; +#5123 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, 12.65446821274873000, -55.06985442120483000 ) ) ; +#5124 = EDGE_CURVE ( 'NONE', #2133, #2845, #1216, .T. ) ; +#5125 = EDGE_CURVE ( 'NONE', #2027, #287, #1168, .T. ) ; +#5126 = CARTESIAN_POINT ( 'NONE', ( 14.61642707707597200, -9.999999999999998200, 12.50000000000000200 ) ) ; +#5127 = ORIENTED_EDGE ( 'NONE', *, *, #3817, .T. ) ; +#5128 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999991800, -11.59115779176004500, -61.56645032909980800 ) ) ; +#5129 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#5130 = CARTESIAN_POINT ( 'NONE', ( 85.32016550602631400, 7.455127018922267400, 1.997595264191612600 ) ) ; +#5131 = CARTESIAN_POINT ( 'NONE', ( 8.744657569830717800, 12.82056983121940000, -17.91777502276425700 ) ) ; +#5132 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333322600, 10.93120901305858300, -55.53160033211129600 ) ) ; +#5133 = EDGE_CURVE ( 'NONE', #3685, #2512, #4268, .T. ) ; +#5134 = EDGE_LOOP ( 'NONE', ( #3478, #695, #3953, #2184 ) ) ; +#5135 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5136 = CYLINDRICAL_SURFACE ( 'NONE', #3033, 1.000000000000000000 ) ; +#5137 = ORIENTED_EDGE ( 'NONE', *, *, #914, .F. ) ; +#5138 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5243, #5223, #378, #3228, #794, #3652, #1209, #4061, #1624, #4461 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0009360462212823626100, 0.001872092442564725200, 0.002808138663847087900, 0.003744184885129450400 ), + .UNSPECIFIED. ) ; +#5140 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9659258262890699800, -0.2588190451025145200 ) ) ; +#5139 = CARTESIAN_POINT ( 'NONE', ( 1.431739173250626600E-015, 1.958309550455936500, -30.44737578434807500 ) ) ; +#5141 = CARTESIAN_POINT ( 'NONE', ( 17.29166040641335300, 10.00000000000000200, 16.20859470210910300 ) ) ; +#5142 = FACE_OUTER_BOUND ( 'NONE', #3488, .T. ) ; +#5143 = CARTESIAN_POINT ( 'NONE', ( 6.258611309744710000, 13.63968153669636000, -21.15556975959688700 ) ) ; +#5144 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -0.6815524533736474500, 16.50000000855573700 ) ) ; +#5145 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#5146 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, -88.81885793164890700, -72.39384004447242700 ) ) ; +#5147 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 11.81382236340626200, -56.23255212013582800 ) ) ; +#5148 = LINE ( 'NONE', #3258, #2869 ) ; +#5149 = CARTESIAN_POINT ( 'NONE', ( 3.796816218318087400, 24.18962766689259800, -60.45641139332956700 ) ) ; +#5150 = CARTESIAN_POINT ( 'NONE', ( 1.666666666666667000, 14.50935294783794500, -26.81835075481546600 ) ) ; +#5151 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5152 = AXIS2_PLACEMENT_3D ( 'NONE', #915, #1737, #3351 ) ; +#5153 = LINE ( 'NONE', #3385, #4102 ) ; +#5154 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 9.448643251977941300, 16.62556765414033700 ) ) ; +#5155 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2588190451025145200, 0.9659258262890699800 ) ) ; +#5156 = CIRCLE ( 'NONE', #272, 5.000000000000000000 ) ; +#5157 = CARTESIAN_POINT ( 'NONE', ( 3.818835185893305600, 2.459464668841447700, -26.43108456632164400 ) ) ; +#5158 = EDGE_CURVE ( 'NONE', #3528, #1800, #3196, .T. ) ; +#5159 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 12.85037919372188100, -55.79900978460639700 ) ) ; +#5160 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5161 = CYLINDRICAL_SURFACE ( 'NONE', #307, 100.0000000000000000 ) ; +#5162 = CARTESIAN_POINT ( 'NONE', ( 7.722062257252805000, 11.09638007258483900, -21.17124974587156000 ) ) ; +#5163 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 3.450527263731581600, 17.63729942090223100 ) ) ; +#5164 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000003800, -0.2788125330342230400, -24.92994530669456700 ) ) ; +#5165 = AXIS2_PLACEMENT_3D ( 'NONE', #539, #1377, #4212 ) ; +#5166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5168 = EDGE_CURVE ( 'NONE', #3300, #1310, #819, .T. ) ; +#5169 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.46917154100015800, -24.57889436686474800 ) ) ; +#5170 = CARTESIAN_POINT ( 'NONE', ( 9.171144642658815000, -9.999999999999998200, 12.57183269374850100 ) ) ; +#5171 = CARTESIAN_POINT ( 'NONE', ( 6.885686155659692000, 21.05593127599716400, -59.90980872323366000 ) ) ; +#5172 = VERTEX_POINT ( 'NONE', #1904 ) ; +#5173 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 7.895162691961171000, 16.90283314778634200 ) ) ; +#5174 = ORIENTED_EDGE ( 'NONE', *, *, #2609, .T. ) ; +#5175 = DIRECTION ( 'NONE', ( 1.325001034533938900E-016, -1.625531029949085900E-016, -1.000000000000000000 ) ) ; +#5176 = ORIENTED_EDGE ( 'NONE', *, *, #111, .F. ) ; +#5177 = CARTESIAN_POINT ( 'NONE', ( 4.980947287247188300, -0.3217414304192213700, -25.79956990190872900 ) ) ; +#5178 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 4.292876200220383100, -29.64181049816159700 ) ) ; +#5179 = EDGE_LOOP ( 'NONE', ( #429, #2269, #3636, #4511 ) ) ; +#5180 = ORIENTED_EDGE ( 'NONE', *, *, #1646, .F. ) ; +#5181 = CARTESIAN_POINT ( 'NONE', ( 9.646051138580142800, 12.80489615493468000, -17.85307902008112200 ) ) ; +#5182 = CARTESIAN_POINT ( 'NONE', ( 19.47847155445419200, 6.260203345782830600, 17.96870753161781700 ) ) ; +#5183 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.529450983624544200, 16.50785938879885300 ) ) ; +#5184 = AXIS2_PLACEMENT_3D ( 'NONE', #2773, #337, #3188 ) ; +#5185 = CARTESIAN_POINT ( 'NONE', ( 1.876310088572669100, 8.137246555305445400, 18.84305754804121600 ) ) ; +#5186 = ORIENTED_EDGE ( 'NONE', *, *, #1364, .F. ) ; +#5187 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333400, 2.612651188657587800, -30.32807655698930600 ) ) ; +#5188 = CARTESIAN_POINT ( 'NONE', ( 13.94455227105052900, -9.999999999998014000, 17.30509895274885000 ) ) ; +#5189 = CARTESIAN_POINT ( 'NONE', ( 9.032779938843582100, 25.56162968902863100, -59.37779278253076100 ) ) ; +#5190 = ORIENTED_EDGE ( 'NONE', *, *, #602, .F. ) ; +#5191 = CARTESIAN_POINT ( 'NONE', ( 18.55521247714949600, 11.16202376646252300, -58.51888271739547100 ) ) ; +#5192 = ORIENTED_EDGE ( 'NONE', *, *, #2885, .T. ) ; +#5193 = CARTESIAN_POINT ( 'NONE', ( 18.19786666700254300, 2.909425343493869100, -30.80539678327542000 ) ) ; +#5194 = FACE_OUTER_BOUND ( 'NONE', #4273, .T. ) ; +#5195 = CARTESIAN_POINT ( 'NONE', ( 1.605399711152856600, 14.46799207489618400, -26.19714369681175000 ) ) ; +#5196 = ORIENTED_EDGE ( 'NONE', *, *, #2856, .F. ) ; +#5197 = ORIENTED_EDGE ( 'NONE', *, *, #341, .F. ) ; +#5198 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2588190451025145200, -0.9659258262890699800 ) ) ; +#5199 = EDGE_CURVE ( 'NONE', #3233, #1762, #2374, .T. ) ; +#5200 = EDGE_CURVE ( 'NONE', #2133, #4726, #5217, .T. ) ; +#5201 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#5202 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3497, #5086, #2683, #242, #3082, #655 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001789458857388924900, 0.003578917714777849800 ), + .UNSPECIFIED. ) ; +#5203 = CARTESIAN_POINT ( 'NONE', ( 5.113629296430875800, 10.00000000000000400, 20.71341011271994500 ) ) ; +#5204 = CARTESIAN_POINT ( 'NONE', ( 2.590484418409737100, 8.199461490175387700, 19.48527001136872300 ) ) ; +#5205 = ORIENTED_EDGE ( 'NONE', *, *, #3889, .F. ) ; +#5206 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 20.86092389567585300, -53.49652112171484900 ) ) ; +#5207 = CARTESIAN_POINT ( 'NONE', ( 9.341764610697799400, 23.48754547016560700, -64.28130030920453900 ) ) ; +#5208 = AXIS2_PLACEMENT_3D ( 'NONE', #3519, #244, #3932 ) ; +#5209 = CIRCLE ( 'NONE', #3537, 5.000000000000000000 ) ; +#5210 = ORIENTED_EDGE ( 'NONE', *, *, #3075, .F. ) ; +#5211 = CARTESIAN_POINT ( 'NONE', ( 17.41109999999999800, 4.292876200220374200, -29.64181049816160400 ) ) ; +#5212 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000002900, 1.758564121058958700, -25.31515713847481300 ) ) ; +#5213 = LINE ( 'NONE', #2419, #3038 ) ; +#5214 = CARTESIAN_POINT ( 'NONE', ( 1.700533333333340300, 10.93120901305860400, -55.53160033211128900 ) ) ; +#5215 = CARTESIAN_POINT ( 'NONE', ( 18.19786666666666600, 10.93120901305857900, -55.53160033211128900 ) ) ; +#5216 = ADVANCED_FACE ( 'NONE', ( #4150 ), #4043, .F. ) ; +#5217 = LINE ( 'NONE', #3569, #3043 ) ; +#5218 = AXIS2_PLACEMENT_3D ( 'NONE', #4711, #251, #3092 ) ; +#5219 = DIRECTION ( 'NONE', ( -0.6484729204542141200, 0.0000000000000000000, 0.7612377233411272700 ) ) ; +#5220 = CIRCLE ( 'NONE', #1313, 2.499999999999999100 ) ; +#5221 = ORIENTED_EDGE ( 'NONE', *, *, #2579, .F. ) ; +#5222 = CARTESIAN_POINT ( 'NONE', ( 1.688911658535434900, 11.05126379376912900, -56.08018304708710400 ) ) ; +#5223 = CARTESIAN_POINT ( 'NONE', ( 18.25628178467634700, 21.79311469692750300, -53.80820297757877300 ) ) ; +#5224 = CARTESIAN_POINT ( 'NONE', ( 17.44920000000000100, 13.99902869006382200, -27.82270432943648000 ) ) ; +#5225 = FACE_OUTER_BOUND ( 'NONE', #4023, .T. ) ; +#5226 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999900, 11.81382236340609800, -56.23255212013580700 ) ) ; +#5227 = CARTESIAN_POINT ( 'NONE', ( 11.08570731853975700, 20.70750842868274300, -60.59052637109837700 ) ) ; +#5228 = AXIS2_PLACEMENT_3D ( 'NONE', #2544, #2934, #506 ) ; +#5229 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5212, #4017, #3201, #766, #3620, #1181, #4038, #1590, #4430, #1998, #4831, #2407 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 8.940560153363745000E-019, 0.001431867971679313500, 0.002863735943358625200, 0.003579669929198284500, 0.004295603915037944100, 0.005727471886717254800 ), + .UNSPECIFIED. ) ; +#5230 = CARTESIAN_POINT ( 'NONE', ( 18.12301975203426400, -0.1313591851744393100, -26.19170789662560500 ) ) ; +#5231 = TOROIDAL_SURFACE ( 'NONE', #2649, 101.0000000000000000, 1.000000000000000000 ) ; +#5232 = CARTESIAN_POINT ( 'NONE', ( 4.988416291753949800, 11.47788851493755200, -22.67481328856044300 ) ) ; +#5234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5233 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 3.513723080095122700, 17.10654937318382100 ) ) ; +#5235 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#5236 = VERTEX_POINT ( 'NONE', #3588 ) ; +#5237 = EDGE_CURVE ( 'NONE', #4436, #1823, #1023, .T. ) ; +#5238 = CARTESIAN_POINT ( 'NONE', ( 18.42008692469347500, 22.34233714545425900, -54.80841316534623100 ) ) ; +#5239 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5240 = CARTESIAN_POINT ( 'NONE', ( 1.688911658535431100, 14.53744865545653800, -27.09768383800605900 ) ) ; +#5241 = ORIENTED_EDGE ( 'NONE', *, *, #4977, .F. ) ; +#5242 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #4054, .NOT_KNOWN. ) ; +#5243 = CARTESIAN_POINT ( 'NONE', ( 18.23173333333333800, 21.66487829819825000, -53.52313491720788400 ) ) ; +#5244 = CARTESIAN_POINT ( 'NONE', ( 1.514840177793669500, 11.13389242027651500, -57.59982461302618600 ) ) ; +#5245 = EDGE_CURVE ( 'NONE', #2592, #3006, #5072, .T. ) ; +#5246 = ORIENTED_EDGE ( 'NONE', *, *, #4105, .F. ) ; +#5247 = CARTESIAN_POINT ( 'NONE', ( 11.52908425120645900, 25.16713947078899600, -59.36982117153553400 ) ) ; +#5248 = ADVANCED_FACE ( 'NONE', ( #1995 ), #3902, .T. ) ; +#5249 = ORIENTED_EDGE ( 'NONE', *, *, #1401, .T. ) ; +#5250 = ORIENTED_EDGE ( 'NONE', *, *, #709, .T. ) ; +#5251 = CARTESIAN_POINT ( 'NONE', ( 19.34829860438448500, 8.151247669657273300, 17.76647911033201800 ) ) ; +#5252 = ORIENTED_EDGE ( 'NONE', *, *, #1401, .F. ) ; +#5254 = CARTESIAN_POINT ( 'NONE', ( 11.52994990443252600, -5.629174335139634200, 17.51968822625086400 ) ) ; +#5253 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5255 = ORIENTED_EDGE ( 'NONE', *, *, #2825, .T. ) ; +#5256 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.96533279648316700, -53.78041229006792900 ) ) ; +#5257 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5258 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 7.040692392140480900, 1.886547840629942100 ) ) ; +#5259 = ORIENTED_EDGE ( 'NONE', *, *, #4953, .T. ) ; +#5260 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5261 = AXIS2_PLACEMENT_3D ( 'NONE', #729, #3587, #1146 ) ; +#5262 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5263 = CARTESIAN_POINT ( 'NONE', ( 14.84157560389343000, 24.20498790799933200, -61.88553567248742100 ) ) ; +#5264 = VERTEX_POINT ( 'NONE', #751 ) ; +#5265 = VERTEX_POINT ( 'NONE', #3607 ) ; +#5266 = VECTOR ( 'NONE', #938, 999.9999999999998900 ) ; +#5267 = EDGE_CURVE ( 'NONE', #1589, #4495, #4949, .T. ) ; +#5268 = ORIENTED_EDGE ( 'NONE', *, *, #3760, .F. ) ; +#5270 = CARTESIAN_POINT ( 'NONE', ( 17.44919999999999800, -18.31287684118413500, -36.48065332244486600 ) ) ; +#5269 = CARTESIAN_POINT ( 'NONE', ( -0.05080000000000899100, 12.65446821274872500, -55.06985442120482300 ) ) ; +#5271 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 6.074766565851411400, 1.627728795527427600 ) ) ; +#5272 = ADVANCED_FACE ( 'NONE', ( #780 ), #2862, .T. ) ; +#5273 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1227, #1635, #4477, #2036, #4865, #2454, #5281, #2846, #410, #3267, #828, #3680 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002287754030310984100, 0.003431631045466477000, 0.004575508060621969100, 0.006863262090932954100, 0.009151016121243939900 ), + .UNSPECIFIED. ) ; +#5274 = CIRCLE ( 'NONE', #1695, 4.000000000000000000 ) ; +#5275 = AXIS2_PLACEMENT_3D ( 'NONE', #4401, #1962, #4794 ) ; +#5276 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5277 = EDGE_CURVE ( 'NONE', #1002, #3179, #635, .T. ) ; +#5278 = ORIENTED_EDGE ( 'NONE', *, *, #2316, .T. ) ; +#5279 = CARTESIAN_POINT ( 'NONE', ( 19.23268178581320200, 10.00000000000000400, 17.52842579294668800 ) ) ; +#5280 = CARTESIAN_POINT ( 'NONE', ( 3.334821722338602100, 10.99260280537034100, -20.86370236426841600 ) ) ; +#5281 = CARTESIAN_POINT ( 'NONE', ( 19.89839999999999500, 3.513723080095130700, 17.10654937318381400 ) ) ; +#5282 = CARTESIAN_POINT ( 'NONE', ( 14.78120317965744900, 8.543729772087742100, 21.51516838437617100 ) ) ; +#5283 = CARTESIAN_POINT ( 'NONE', ( 13.42557350807184400, 11.21830755288877600, -21.67189111135839100 ) ) ; +#5284 = TOROIDAL_SURFACE ( 'NONE', #2813, 10.00000000000000000, 2.500000000000000000 ) ; +#5285 = CARTESIAN_POINT ( 'NONE', ( 0.7796635445371201700, 9.599745061737849000, 16.71953379312923700 ) ) ; +#5286 = CARTESIAN_POINT ( 'NONE', ( 18.89839999999999900, 110.0000000000000000, 5.665249758739311600 ) ) ; +#5287 = DATE_AND_TIME ( #1093, #2160 ) ; +#5288 = AXIS2_PLACEMENT_3D ( 'NONE', #3821, #4615, #545 ) ; +#5289 = CIRCLE ( 'NONE', #2567, 1.000000000000000000 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Handle.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Handle.step new file mode 100644 index 0000000..2293faf --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Handle.step @@ -0,0 +1,18761 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Handle.STEP', + '2013-11-14T05:09:47', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( 30.16674433814930400, -30.78861925749508200, 27.46571531444859500 ) ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( 34.58415707349906400, -100.0000000000000300, -28.92069478362982300 ) ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( 8.755886304012531000, -31.05321815550197700, 26.90363355787680900 ) ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( 36.34965492301253700, -30.13205933563841700, 23.39258288836580100 ) ) ; +#5 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #8366, #13422, ( #46 ) ) ; +#6 = CARTESIAN_POINT ( 'NONE', ( 14.44952136304185300, -30.73002225197359000, 28.68783886992675700 ) ) ; +#7 = VECTOR ( 'NONE', #9636, 1000.000000000000000 ) ; +#8 = DIRECTION ( 'NONE', ( 4.502840185967557200E-015, 0.9848077530122092400, 0.1736481776669242800 ) ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 5.110160285084107000, -29.26937299786695200, 24.37251149513687000 ) ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -95.07596123493894400, 15.95758058754439400 ) ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 13.26643176553552500, -13.77687010209242600, -25.66596410162999900 ) ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( 4.849604375360051700, -10.01030339717064200, 22.66968200243134700 ) ) ; +#13 = ORIENTED_EDGE ( 'NONE', *, *, #11443, .F. ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000000, -16.29999999999999000 ) ) ; +#15 = AXIS2_PLACEMENT_3D ( 'NONE', #5576, #13403, #6712 ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( 3.410159166703942800, -28.97643582513747500, 21.98530352242396900 ) ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -22.46243069294107600, -27.19746277637471700 ) ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( 31.94047841124259100, -30.90067681864390900, 26.62081505092358200 ) ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( 22.57347623597518500, -19.89847195717275200, 23.25457145115144200 ) ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( 28.93953228029503700, -30.80426269877095500, 27.88089576412685100 ) ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( 39.40732319038831800, -9.901180707973356500, 12.84504997725254100 ) ) ; +#23 = CARTESIAN_POINT ( 'NONE', ( 11.95409154502905100, -24.05646108362240600, 18.70756029679022000 ) ) ; +#24 = CARTESIAN_POINT ( 'NONE', ( 15.66231433324975700, -12.50000000000000000, -13.72174681794467300 ) ) ; +#25 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5645, #1219, #1258 ), + ( #9052, #2353, #10180 ), + ( #3462, #11311, #4577 ), + ( #12409, #5692, #13511 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01394133909547685300, 0.01907868051755837500 ), + ( 0.0000000000000000000, 0.8352917476300401000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7598390280928586400, 0.9208870120594074800), + ( 1.000000000000000000, 0.7598511168733435000, 0.9208909943032213000), + ( 1.000000000000000000, 0.7598429325356087500, 0.9208882982472910200), + ( 1.000000000000000000, 0.7598139317266053800, 0.9208787449021547100) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#26 = CARTESIAN_POINT ( 'NONE', ( 17.50735423513289000, -27.96523496585093200, 27.45710953202296500 ) ) ; +#27 = DIRECTION ( 'NONE', ( 0.6910284383159967000, 0.7228275710282189300, 0.0000000000000000000 ) ) ; +#28 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #8069, #1406 ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 4.175142095231875000, -30.87282918534610900, 22.84907284270194700 ) ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( 37.48994129500718500, -27.72741353629565700, 9.861819824364038900 ) ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( 34.47478173475489200, -31.10273119111845100, 24.52167761646848000 ) ) ; +#32 = CARTESIAN_POINT ( 'NONE', ( 23.15542275340466800, -12.50000000000000200, 10.05307613610212100 ) ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( 33.71585983908664000, -31.05386803772497100, 25.32525121619179500 ) ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( 15.01568073691066600, -12.49999999999999300, -12.30578219822218400 ) ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -99.99999999999998600, 21.63057173623876400 ) ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( 3.289510703312168000, -20.82160283004108000, 12.76254672517189300 ) ) ; +#37 = DIRECTION ( 'NONE', ( -0.9701425001453309900, 0.2425356250363367400, 0.0000000000000000000 ) ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 6.940344902641367500, -30.93300703883872400, 25.92984325169963700 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( 1.050062507637643100, -11.56244887397461700, -16.37141180052908100 ) ) ; +#40 = FACE_OUTER_BOUND ( 'NONE', #4786, .T. ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( 37.07445554076490900, -30.79756603876100800, 9.733647318743765100 ) ) ; +#42 = VECTOR ( 'NONE', #9524, 1000.000000000000000 ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( 27.71824655089053400, -10.00550491798607000, 24.99902933443247100 ) ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -99.99999999999998600, -38.36942826376122900 ) ) ; +#45 = FACE_OUTER_BOUND ( 'NONE', #7761, .T. ) ; +#46 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #7933, .NOT_KNOWN. ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( 38.07985034654716800, -10.08750752732982500, 18.60305075680077600 ) ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( 37.80134337563561100, -18.79505039941068400, 7.990037736305147600 ) ) ; +#49 = CARTESIAN_POINT ( 'NONE', ( 29.75896959447080200, -30.61528269554898800, 27.63793442359579400 ) ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( -1.905824131322175000E-018, 9.723952627011014400, 1.698875742032556200 ) ) ; +#51 = CARTESIAN_POINT ( 'NONE', ( 8.731483158970132100, -30.63236297890657400, 27.03218240083625500 ) ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( 35.70576613523795100, -30.90792143674332600, 23.02591239018742500 ) ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( 2.201604286630126400, -18.80694826461782700, -11.70378783570185500 ) ) ; +#54 = CIRCLE ( 'NONE', #1830, 1.200000000000010200 ) ; +#55 = AXIS2_PLACEMENT_3D ( 'NONE', #4918, #521, #7397 ) ; +#56 = CARTESIAN_POINT ( 'NONE', ( 31.47812529518022400, -20.55245580501563300, 20.11873665265613900 ) ) ; +#57 = CARTESIAN_POINT ( 'NONE', ( 5.089419086297279000, -30.58713740294541200, 24.75638954521400200 ) ) ; +#58 = FACE_OUTER_BOUND ( 'NONE', #5254, .T. ) ; +#59 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#60 = ADVANCED_FACE ( 'NONE', ( #4771 ), #887, .F. ) ; +#61 = CARTESIAN_POINT ( 'NONE', ( 11.13771296997098200, -32.81590427457359000, 25.59111035014557700 ) ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, -19.91444001015388900 ) ) ; +#63 = CARTESIAN_POINT ( 'NONE', ( 3.185202997418464100, -30.42745048599824600, 21.78283829922413500 ) ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 30.01822064197971300, -19.91735840009650000, -25.03876949123265000 ) ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( 31.63007915558127400, -30.18131969972698800, 26.85693490871217600 ) ) ; +#66 = CARTESIAN_POINT ( 'NONE', ( 0.8448003558865314600, -10.71063330783966400, 14.11087093656437800 ) ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( 28.93975993979214000, -30.83523262530224000, 27.87532269012158900 ) ) ; +#68 = CARTESIAN_POINT ( 'NONE', ( 36.44305882247942900, -28.87958823967095200, 21.82368022109982800 ) ) ; +#69 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12090, #4305, #12136 ), + ( #5402, #13246, #6539 ), + ( #14338, #7676, #1030 ), + ( #8816, #2116, #9939 ), + ( #3229, #11070, #4348 ), + ( #12181, #5446, #13286 ), + ( #6582, #14379, #7721 ), + ( #1074, #8862, #2161 ), + ( #9981, #3268, #11117 ), + ( #4389, #12220, #5493 ), + ( #13332, #6625, #32 ), + ( #7774, #1119, #8908 ), + ( #2211, #10027, #3315 ), + ( #11164, #4438, #12267 ), + ( #5542, #13373, #6675 ), + ( #80, #7818, #1171 ), + ( #8955, #2256, #10082 ), + ( #3363, #11209, #4481 ), + ( #12316, #5590, #13419 ), + ( #6726, #128, #7864 ), + ( #1215, #9005, #2303 ), + ( #10130, #3414, #11256 ), + ( #4528, #12359, #5641 ), + ( #13463, #6773, #174 ), + ( #7912, #1254, #9049 ), + ( #2349, #10175, #3458 ), + ( #11306, #4571, #12403 ), + ( #5688, #13507, #6815 ), + ( #213, #7961, #1295 ), + ( #9093, #2393, #10221 ), + ( #3502, #11347, #4619 ), + ( #12448, #5735, #13548 ), + ( #6864, #254, #8008 ), + ( #1348, #9139, #2434 ), + ( #10266, #3554, #11394 ), + ( #4663, #12504, #5788 ), + ( #13596, #6912, #306 ), + ( #8057, #1395, #9192 ), + ( #2487, #10303, #3600 ), + ( #11446, #4707, #12545 ), + ( #5838, #13645, #6958 ), + ( #351, #8107, #1439 ), + ( #9237, #2535, #10351 ), + ( #3643, #11490, #4757 ), + ( #12591, #5884, #13698 ), + ( #7010, #396, #8160 ), + ( #1494, #9285, #2584 ), + ( #10405, #3694, #11539 ), + ( #4803, #12639, #5931 ), + ( #13741, #7061, #441 ), + ( #8211, #1541, #9333 ), + ( #2629, #10456, #3744 ), + ( #11583, #4847, #12688 ), + ( #5982, #13786, #7108 ), + ( #495, #8257, #1581 ), + ( #9380, #2676, #10505 ), + ( #3790, #11632, #4892 ), + ( #12734, #6030, #13838 ), + ( #7156, #540, #8310 ), + ( #1628, #9424, #2729 ), + ( #10558, #3837, #11679 ), + ( #4943, #12782, #6073 ), + ( #13883, #7200, #580 ), + ( #8355, #1678, #9473 ), + ( #2774, #10612, #3891 ), + ( #11727, #4992, #12837 ), + ( #6121, #13929, #7251 ), + ( #628, #8404, #1721 ), + ( #9529, #2815, #10659 ), + ( #3940, #11773, #5041 ), + ( #12885, #6172, #13979 ), + ( #7299, #675, #8451 ), + ( #1769, #9574, #2870 ), + ( #10705, #3982, #11821 ), + ( #5094, #12932, #6222 ), + ( #14034, #7353, #725 ), + ( #8506, #1822, #9632 ), + ( #2925, #10766, #4033 ), + ( #11875, #5149, #12985 ), + ( #6275, #14087, #7416 ), + ( #776, #8559, #1879 ), + ( #9688, #2978, #10823 ), + ( #4093, #11927, #5202 ), + ( #13044, #6331, #14142 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0002478614204946947700, 0.0003717921307420421600, 0.0004337574858657158300, 0.0004957228409893895500, 0.0007435842614840843200, 0.0008675149717314316500, 0.0009294803268551053700, 0.0009914456819787790900, 0.001115376392226126500, 0.001177341747349800300, 0.001208324424911637100, 0.001223815763692555400, 0.001239307102473474000, 0.001363237812720821400, 0.001425203167844495100, 0.001456185845406331800, 0.001471677184187250300, 0.001487168522968168600, 0.001735029943462863300, 0.001858960653710210700, 0.001920926008833884500, 0.001951908686395721300, 0.001982891363957558200, 0.002230752784452253100, 0.002354683494699600500, 0.002478614204946947900, 0.002726475625441642800, 0.002850406335688990300, 0.002912371690812663600, 0.002943354368374500600, 0.002958845707155419200, 0.002974337045936337300, 0.003098267756183684300, 0.003160233111307358000, 0.003191215788869194600, 0.003222198466431031700, 0.003346129176678379200, 0.003408094531802052900, 0.003470059886925726600, 0.003717921307420421500, 0.003965782727915116400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6427876096865419200, 1.000000000000000000), + ( 1.000000000000000000, 0.6427855376847196900, 1.000000000000000000), + ( 1.000000000000000000, 0.6428991355960218500, 1.000000000000000000), + ( 1.000000000000000000, 0.6432528204742650200, 1.000000000000000000), + ( 1.000000000000000000, 0.6434006314733196100, 1.000000000000000000), + ( 1.000000000000000000, 0.6436596953991875500, 1.000000000000000000), + ( 1.000000000000000000, 0.6437522130598728500, 1.000000000000000000), + ( 1.000000000000000000, 0.6439478160376871400, 1.000000000000000000), + ( 1.000000000000000000, 0.6440495844982476700, 1.000000000000000000), + ( 1.000000000000000000, 0.6445950642368708500, 1.000000000000000000), + ( 1.000000000000000000, 0.6451641927601139400, 1.000000000000000000), + ( 1.000000000000000000, 0.6461978310931109100, 1.000000000000000000), + ( 1.000000000000000000, 0.6465724165163448900, 1.000000000000000000), + ( 1.000000000000000000, 0.6471612612046621100, 1.000000000000000000), + ( 1.000000000000000000, 0.6473620209780003300, 1.000000000000000000), + ( 1.000000000000000000, 0.6477703069113763800, 1.000000000000000000), + ( 1.000000000000000000, 0.6479744772599712600, 1.000000000000000000), + ( 1.000000000000000000, 0.6486283123161967800, 1.000000000000000000), + ( 1.000000000000000000, 0.6490951651574153900, 1.000000000000000000), + ( 1.000000000000000000, 0.6498292712008497700, 1.000000000000000000), + ( 1.000000000000000000, 0.6500795363066869100, 1.000000000000000000), + ( 1.000000000000000000, 0.6504612389109120100, 1.000000000000000000), + ( 1.000000000000000000, 0.6505895222252884300, 1.000000000000000000), + ( 1.000000000000000000, 0.6507832555608571400, 1.000000000000000000), + ( 1.000000000000000000, 0.6508438057215626400, 1.000000000000000000), + ( 1.000000000000000000, 0.6509854327918140900, 1.000000000000000000), + ( 1.000000000000000000, 0.6510555724475358700, 1.000000000000000000), + ( 1.000000000000000000, 0.6516823864346211700, 1.000000000000000000), + ( 1.000000000000000000, 0.6522106328371961600, 1.000000000000000000), + ( 1.000000000000000000, 0.6530470670303661900, 1.000000000000000000), + ( 1.000000000000000000, 0.6533327069680550100, 1.000000000000000000), + ( 1.000000000000000000, 0.6537847687388392800, 1.000000000000000000), + ( 1.000000000000000000, 0.6539394345746631900, 1.000000000000000000), + ( 1.000000000000000000, 0.6541799991262928800, 1.000000000000000000), + ( 1.000000000000000000, 0.6542689508901883300, 1.000000000000000000), + ( 1.000000000000000000, 0.6544160120115388700, 1.000000000000000000), + ( 1.000000000000000000, 0.6544901698198690700, 1.000000000000000000), + ( 1.000000000000000000, 0.6557614386520608200, 1.000000000000000000), + ( 1.000000000000000000, 0.6571347245128383900, 1.000000000000000000), + ( 1.000000000000000000, 0.6592923904375049800, 1.000000000000000000), + ( 1.000000000000000000, 0.6600261035313123000, 1.000000000000000000), + ( 1.000000000000000000, 0.6611260440232655800, 1.000000000000000000), + ( 1.000000000000000000, 0.6614926053284861900, 1.000000000000000000), + ( 1.000000000000000000, 0.6620399332621995600, 1.000000000000000000), + ( 1.000000000000000000, 0.6622219613074915600, 1.000000000000000000), + ( 1.000000000000000000, 0.6625848442159416600, 1.000000000000000000), + ( 1.000000000000000000, 0.6627751385786334600, 1.000000000000000000), + ( 1.000000000000000000, 0.6644957250765315400, 1.000000000000000000), + ( 1.000000000000000000, 0.6660928046540004500, 1.000000000000000000), + ( 1.000000000000000000, 0.6685453158572128900, 1.000000000000000000), + ( 1.000000000000000000, 0.6693908609301159100, 1.000000000000000000), + ( 1.000000000000000000, 0.6711071881852178600, 1.000000000000000000), + ( 1.000000000000000000, 0.6719843912701828300, 1.000000000000000000), + ( 1.000000000000000000, 0.6745333364087378000, 1.000000000000000000), + ( 1.000000000000000000, 0.6763727262160467200, 1.000000000000000000), + ( 1.000000000000000000, 0.6791694244553849700, 1.000000000000000000), + ( 1.000000000000000000, 0.6801064474825013800, 1.000000000000000000), + ( 1.000000000000000000, 0.6814945354362498300, 1.000000000000000000), + ( 1.000000000000000000, 0.6819543639684522200, 1.000000000000000000), + ( 1.000000000000000000, 0.6826373125179578900, 1.000000000000000000), + ( 1.000000000000000000, 0.6828638352206882800, 1.000000000000000000), + ( 1.000000000000000000, 0.6832016673275990200, 1.000000000000000000), + ( 1.000000000000000000, 0.6833139531957777000, 1.000000000000000000), + ( 1.000000000000000000, 0.6835378358036212600, 1.000000000000000000), + ( 1.000000000000000000, 0.6836718288469400000, 1.000000000000000000), + ( 1.000000000000000000, 0.6847783396906006500, 1.000000000000000000), + ( 1.000000000000000000, 0.6856819938504940000, 1.000000000000000000), + ( 1.000000000000000000, 0.6870634678811216000, 1.000000000000000000), + ( 1.000000000000000000, 0.6875271593479470600, 1.000000000000000000), + ( 1.000000000000000000, 0.6882451333671152400, 1.000000000000000000), + ( 1.000000000000000000, 0.6884882338645105200, 1.000000000000000000), + ( 1.000000000000000000, 0.6889860496033520800, 1.000000000000000000), + ( 1.000000000000000000, 0.6892464616931072200, 1.000000000000000000), + ( 1.000000000000000000, 0.6904420733488980700, 1.000000000000000000), + ( 1.000000000000000000, 0.6914225795013512200, 1.000000000000000000), + ( 1.000000000000000000, 0.6928979991830964700, 1.000000000000000000), + ( 1.000000000000000000, 0.6933896168337784200, 1.000000000000000000), + ( 1.000000000000000000, 0.6943681708058678800, 1.000000000000000000), + ( 1.000000000000000000, 0.6948641831287787300, 1.000000000000000000), + ( 1.000000000000000000, 0.6972076047658086800, 1.000000000000000000), + ( 1.000000000000000000, 0.6992100765426891900, 1.000000000000000000), + ( 1.000000000000000000, 0.7032265843058671500, 1.000000000000000000), + ( 1.000000000000000000, 0.7052322421412334800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865473500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#70 = CARTESIAN_POINT ( 'NONE', ( 35.26214535946835600, -10.00000000000000400, 20.22526405804129700 ) ) ; +#71 = CARTESIAN_POINT ( 'NONE', ( 7.134385113311116900, -21.53124600516011000, -18.91988921285792500 ) ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -9.552856433198032300, 11.61047037120873100 ) ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( 3.457217394150763100, -30.09307285607937400, 23.14251704474799700 ) ) ; +#74 = EDGE_CURVE ( 'NONE', #13850, #7285, #903, .T. ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 0.9611573093618528400, -9.901466397326411000, 14.01608990457791000 ) ) ; +#76 = ADVANCED_FACE ( 'NONE', ( #929 ), #8542, .T. ) ; +#77 = EDGE_LOOP ( 'NONE', ( #11454, #1073, #1447, #8847 ) ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( 1.041478870515836200, -11.55680024840560800, -16.34657478267221400 ) ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 34.35212704167485500, -29.98257657995820900, 25.25611651677170500 ) ) ; +#80 = CARTESIAN_POINT ( 'NONE', ( 27.20873527214842000, -24.10787342185465900, 19.07497601784802700 ) ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 33.59254445476752000, -29.91934909552713900, 25.72751397124591600 ) ) ; +#82 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#83 = CIRCLE ( 'NONE', #1031, 2.499999999999998700 ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 4.267419654849077500, -18.98491486164269700, 15.71202239828918200 ) ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( 10.40756160371138300, -95.07596123493894400, 15.72880384773701600 ) ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 37.13726503662852700, -30.52231436796669300, 9.507322611821887600 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 6.907344085663103400, -30.21443274936243000, 26.10803477094210800 ) ) ; +#88 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #9585, #4483, ( #12503 ) ) ; +#89 = CARTESIAN_POINT ( 'NONE', ( 31.08942613950736300, -100.0000000000000100, -34.89671252249890900 ) ) ; +#90 = VERTEX_POINT ( 'NONE', #10583 ) ; +#91 = CARTESIAN_POINT ( 'NONE', ( 19.21401583611498500, -27.93249662222837800, 27.46301701406172000 ) ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 37.49903945466005700, -21.21683018887912600, 7.963185932652340400 ) ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( 29.75990270125733200, -30.76400720869360600, 27.61964079596969800 ) ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( 0.02832571919072552500, 9.894175532731914300, -1.388698443143499400 ) ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( 8.757135025562446300, -30.24861342357138100, 27.04272967280619600 ) ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( 36.05084392801416000, -29.89825612223500800, 23.78106630446534100 ) ) ; +#97 = FACE_OUTER_BOUND ( 'NONE', #9110, .T. ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( 3.744294805625681300, -97.04517183358916600, 18.40004121853225200 ) ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 37.24216895095534600, -25.10692011806034400, 10.01103898978674800 ) ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 5.269881043959959900, -29.54594918666064600, 24.74956454037296200 ) ) ; +#101 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7284, #7557, #912, #8703, #2011, #9824, #3120, #10971, #4230, #12065, #11576, #4841, #12683, #5976, #13780, #7101 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001001397045579782100, 0.001502095568369679000, 0.002002794091159576000, 0.002503492613949472400, 0.003004191136739369200, 0.003504889659529266500, 0.004005588182319163300 ), + .UNSPECIFIED. ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -17.49999999999999600 ) ) ; +#103 = ORIENTED_EDGE ( 'NONE', *, *, #7793, .F. ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 31.14922143451936200, -95.07596123493894400, 15.12218545585789900 ) ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( 37.41397862649090200, -10.00000000000000000, 20.65015935807152300 ) ) ; +#106 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #10114, #11212, ( #12503 ) ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 17.39762135614234900, -19.90864822626257400, 23.25255904423470500 ) ) ; +#108 = CARTESIAN_POINT ( 'NONE', ( 2.878431386961268800, -29.28086485415248700, 21.98051442653281400 ) ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( 28.46417652636321100, -97.49979229965106200, 21.41821362754263400 ) ) ; +#110 = FACE_OUTER_BOUND ( 'NONE', #8106, .T. ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 31.66157665650085200, -30.71202477171013400, 26.82975981512628700 ) ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.06772555652651000, -24.99999999999999600 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 28.83705352054058200, -30.80929181828934200, 27.91086063433532200 ) ) ; +#114 = CARTESIAN_POINT ( 'NONE', ( 37.50000713534636500, -29.78100410072827800, 21.66544820671113300 ) ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( 2.201425001453300600, -18.80570000581306200, 7.788262581895413200 ) ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 6.857352523274039800, -12.49999999999982100, -17.05243507002402800 ) ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( 4.929754415205132500, -12.49999999999998600, 10.50345766038353900 ) ) ; +#118 = ORIENTED_EDGE ( 'NONE', *, *, #11049, .F. ) ; +#119 = FACE_OUTER_BOUND ( 'NONE', #10062, .T. ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( 4.150578102561645700, -29.05951881031416000, 23.17464412401076900 ) ) ; +#121 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11942, #8574, #5216 ), + ( #13055, #6347, #14157 ), + ( #7484, #845, #8627 ), + ( #1941, #9757, #3047 ), + ( #10892, #4156, #11996 ), + ( #5264, #13106, #6400 ), + ( #14205, #7534, #888 ), + ( #8681, #1985, #9802 ), + ( #3100, #10942, #4208 ), + ( #12042, #5317, #13155 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001841940554937685000, 0.003683881109875370000, 0.005525821664813055500, 0.007367762219750740100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9049646166428264600, 1.000000000000000000), + ( 1.000000000000000000, 0.8965144736760742900, 1.000000000000000000), + ( 1.000000000000000000, 0.8885896255711140900, 1.000000000000000000), + ( 1.000000000000000000, 0.8734030101737830800, 1.000000000000000000), + ( 1.000000000000000000, 0.8660921494948093900, 1.000000000000000000), + ( 1.000000000000000000, 0.8522837295791841900, 1.000000000000000000), + ( 1.000000000000000000, 0.8457556059468719400, 1.000000000000000000), + ( 1.000000000000000000, 0.8332529881156088800, 1.000000000000000000), + ( 1.000000000000000000, 0.8272809932559800300, 1.000000000000000000), + ( 1.000000000000000000, 0.8215198476744709500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#122 = CARTESIAN_POINT ( 'NONE', ( 18.87499565263046000, -9.904327821957187100, 25.74506214676257800 ) ) ; +#123 = FACE_OUTER_BOUND ( 'NONE', #189, .T. ) ; +#124 = CARTESIAN_POINT ( 'NONE', ( 24.39371474684502800, -12.50000000000002700, -13.65733296851859500 ) ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( 9.254451182074062000, -38.13048303796932700, 17.57866603314201700 ) ) ; +#126 = CARTESIAN_POINT ( 'NONE', ( 34.28362167571044200, -30.88896169945610000, 25.01359953871541500 ) ) ; +#127 = CC_DESIGN_APPROVAL ( #170, ( #12503 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 28.87928740186568500, -12.50000000000039100, 20.31667115778141100 ) ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 33.63616311011237800, -30.74991214045681100, 25.64368737099315600 ) ) ; +#130 = FACE_OUTER_BOUND ( 'NONE', #3417, .T. ) ; +#131 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#132 = ORIENTED_EDGE ( 'NONE', *, *, #14194, .T. ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( 5.511207838789090400, -19.49532654451108700, 17.32239872315480200 ) ) ; +#134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 32.42760751619828600, -37.34581297570355900, 16.37708441118704900 ) ) ; +#136 = CIRCLE ( 'NONE', #9470, 2.500000000000002200 ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 7.091078691069720100, -31.14669258141466600, 25.85828587947931800 ) ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 34.21851553603306000, -100.0000000000000100, -1.650587127058556600 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 3.049909031887424700, -92.77294823610702700, 2.148011024611297300 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 12.41000609405672800, -32.99230289635559600, 25.93312472157662200 ) ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 8.981438871123701900, -19.99999999999999600 ) ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 37.49966941399756600, -20.39529642032442100, 8.110416904342729400 ) ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( 29.75897300053129200, -30.92227998245797900, 27.58382517209832900 ) ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 2.594888167864695100, -28.26511458542414300, 14.91581291316877200 ) ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( 8.930378025044090500, -30.74185334612530300, 27.10143934133742500 ) ) ; +#146 = CARTESIAN_POINT ( 'NONE', ( 35.57515012643536100, -30.90945270868195000, 23.32853307202693200 ) ) ; +#147 = FACE_OUTER_BOUND ( 'NONE', #2937, .T. ) ; +#148 = ORIENTED_EDGE ( 'NONE', *, *, #7062, .T. ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( 11.81907905734205900, -30.80754468523409500, 28.10233139441857400 ) ) ; +#150 = ADVANCED_FACE ( 'NONE', ( #772 ), #13314, .T. ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 23.66292631866182100, -19.18949841699725700, 23.36467695346051300 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 5.431612119287255100, -30.95594027330678700, 24.65264615021110500 ) ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 2.500558280723114800, -21.21979640085438500, 7.921658914491018800 ) ) ; +#154 = VERTEX_POINT ( 'NONE', #7755 ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 9.468778205477042000, -12.21899232923983500, -24.99999999999997500 ) ) ; +#156 = CARTESIAN_POINT ( 'NONE', ( 14.56482570941368600, -28.03496589752044300, 27.28314026791031200 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 3.645816373971199700, -30.64794151388797200, 21.91733637787740100 ) ) ; +#158 = VECTOR ( 'NONE', #5099, 1000.000000000000000 ) ; +#159 = ORIENTED_EDGE ( 'NONE', *, *, #2564, .F. ) ; +#160 = PLANE ( 'NONE', #2463 ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( 31.53028129672178500, -30.17181373515263900, 26.90176759839134100 ) ) ; +#162 = CARTESIAN_POINT ( 'NONE', ( 28.83675883120258700, -30.82428157727002100, 27.90830336976521400 ) ) ; +#163 = CARTESIAN_POINT ( 'NONE', ( 36.44138607969111400, -30.56557552042743400, 21.52649507234417900 ) ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( 15.20159878947711000, -12.50000000000000500, -12.98644704694742600 ) ) ; +#165 = CARTESIAN_POINT ( 'NONE', ( 15.11017954977978800, -12.50000000000002000, 8.321077427026109400 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000007100, -21.23105625617643700, 0.0000000000000000000 ) ) ; +#167 = ORIENTED_EDGE ( 'NONE', *, *, #8223, .T. ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( 3.812385589499202700, -30.47221989194770200, 23.27954501914251400 ) ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( 10.63020170641007800, -10.00000000000000000, 24.39439945953255100 ) ) ; +#170 = APPROVAL ( #10085, 'UNSPECIFIED' ) ; +#171 = CARTESIAN_POINT ( 'NONE', ( 30.48849563011080500, -21.16606641379774700, -21.52975408446602400 ) ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( 3.198664061269797200, -31.76828049579746200, 10.54594364132796100 ) ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( 34.05061140693560200, -29.63669426400429400, 25.29530678278867800 ) ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( 23.66920273988398500, -12.50000000000002500, 9.842325132600297600 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( 33.42600113064607800, -29.67389253805464800, 25.72002460848618100 ) ) ; +#176 = VERTEX_POINT ( 'NONE', #11147 ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 6.548900135965229000, -19.91637826103040300, 18.44111056964630200 ) ) ; +#178 = DIRECTION ( 'NONE', ( -0.4327510625117927900, -0.01347413249253065800, -0.9014127609749532600 ) ) ; +#179 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -22.49999999999997900, -11.97268808056956300 ) ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 6.977978656763452700, -30.45377225512410700, 26.15913589802313100 ) ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 26.57608945946901700, -100.0000000000000100, 5.963509649343834000 ) ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 9.934684141622256000 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 5.414827474896021000, -29.60191644254127400, 25.49823838289098900 ) ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( 11.04290412707890200, -10.32719144572559100, -25.03310972723736700 ) ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( 37.59454232350309200, -19.58182258352691100, 8.448202571640719000 ) ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, 20.00000000000000400 ) ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( 8.948160955825287000, -30.32739799114558800, 27.13390149222201200 ) ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( 35.76756323277123100, -29.51334878850695300, 23.83827702199009100 ) ) ; +#189 = EDGE_LOOP ( 'NONE', ( #7244, #3522, #6131, #8601 ) ) ; +#190 = AXIS2_PLACEMENT_3D ( 'NONE', #5291, #13133, #6422 ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( 27.74735395335220600, -28.11072249193609100, 26.76374334190920100 ) ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 23.47411650217507200, -19.00051484900046000, 23.41296639185411600 ) ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 5.268685970409310700, -29.99320510885592800, 25.00229660611223200 ) ) ; +#194 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238400 ) ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( 6.801152158485743700, -23.39639781220947500, 13.99318869378184100 ) ) ; +#196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( 36.51815434072970100, -30.51278585580879000, 21.40237151576244300 ) ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( 2.641091423729008600, -29.66774653114731200, 22.06514958681548700 ) ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 22.34990674713925400, -28.77556518705050300, 29.18936127947248600 ) ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( 31.56405323573586900, -30.60402209571408600, 26.89807584882429500 ) ) ; +#201 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -30.86101731591739700, 26.28307327246300300 ) ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#203 = CARTESIAN_POINT ( 'NONE', ( 37.38773535055926800, -29.46141107863922300, 21.78513279686009700 ) ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 27.10486571346788800, -27.28474772798486800, 21.23681108289172300 ) ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 5.761004406284559600, -23.09573478499832100, 11.83864773641549600 ) ) ; +#206 = AXIS2_PLACEMENT_3D ( 'NONE', #12003, #9810, #3107 ) ; +#207 = CARTESIAN_POINT ( 'NONE', ( 3.993885627419580900, -29.34301566036864300, 23.41407498618881500 ) ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 5.876470005292812700, -19.72398346481455900, 17.73822049801359300 ) ) ; +#209 = ADVANCED_FACE ( 'NONE', ( #942 ), #12638, .F. ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( 29.42512266543090900, -12.49999999999988800, -20.85148830335825200 ) ) ; +#211 = CARTESIAN_POINT ( 'NONE', ( 35.32724923474891900, -95.07596123493894400, 12.92977595461171200 ) ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( 34.20609408544167000, -30.55479361081659900, 25.33035256177596800 ) ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( 28.87800580510688100, -23.99243202617238800, 18.25251894869748900 ) ) ; +#214 = CARTESIAN_POINT ( 'NONE', ( 33.57615482085350300, -30.51520063491244600, 25.79082564492966500 ) ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 10.85519319252134500, -30.81014361243034500, 27.81621363827537200 ) ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( 8.401981044035752100, -20.20833672920821700, 20.12059942129484800 ) ) ; +#217 = CARTESIAN_POINT ( 'NONE', ( 24.96887469495403500, -12.49999999999995700, -12.38645453872650700 ) ) ; +#218 = CARTESIAN_POINT ( 'NONE', ( 7.096714084628153800, -29.79374274820095200, 26.08795639257567300 ) ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( 2.339446673331633700, -30.33974953486315600, 22.98878163676588900 ) ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 4.956370946453870600, -11.88046532185937000, 19.72598855602549500 ) ) ; +#221 = CARTESIAN_POINT ( 'NONE', ( 37.75085330833889700, -18.82225718270272500, 9.115816492581377200 ) ) ; +#222 = ORIENTED_EDGE ( 'NONE', *, *, #7105, .F. ) ; +#223 = CARTESIAN_POINT ( 'NONE', ( 14.82693538229766300, -16.12174174370361300, 23.92057176165580800 ) ) ; +#224 = CARTESIAN_POINT ( 'NONE', ( 9.035450485347336500, -30.88680295451700900, 27.10626561749571200 ) ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 35.76757154842189100, -30.65833203437301800, 23.63593144292096700 ) ) ; +#226 = CARTESIAN_POINT ( 'NONE', ( 33.33964696850346600, -31.04604829231560400, 25.98322274786533700 ) ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( 24.62889414218231100, -18.11861995317181600, 23.53715061901485600 ) ) ; +#228 = CARTESIAN_POINT ( 'NONE', ( 5.847163100829159400, -31.14394118422494300, 24.80686203304394200 ) ) ; +#229 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6984, #156, #3670, #11518 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004319146617202009400 ), + .UNSPECIFIED. ) ; +#230 = CARTESIAN_POINT ( 'NONE', ( 6.237057319159076100, -12.50000000000007800, 15.08346993229729300 ) ) ; +#231 = CARTESIAN_POINT ( 'NONE', ( 0.4397667220164350700, -11.75906688806567000, 8.362148191836126900 ) ) ; +#232 = CARTESIAN_POINT ( 'NONE', ( 33.45902902501907100, -29.92386529299949800, 26.11965376220358000 ) ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( 3.676720614103030600, -28.92302837445425100, 22.22272939555884700 ) ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438938600, 6.640286328760893800, -20.68999999999999800 ) ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( 12.46848886831333100, -30.65936817455452300, 28.29096948798330000 ) ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 31.53191530372251300, -31.07607108713112600, 26.74583770682441400 ) ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( 28.96618849743392900, -9.895584009837854500, -25.00000000000000000 ) ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( 36.62012082312399000, -30.50274062382056400, 21.60034935253733200 ) ) ; +#240 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -22.03500000000001400, 20.37790478717370500 ) ) ; +#241 = ORIENTED_EDGE ( 'NONE', *, *, #12783, .F. ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( 33.89253093617768500, -28.81132762320064000, 25.26856386350058900 ) ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( 5.498488545014127200, -12.50000000000051700, 13.28716901866299900 ) ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( 3.853505960285810200, -30.75416420444154000, 22.30742832973658500 ) ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 4.354467233919903500, -30.85000191595442600, 23.38114732999168100 ) ) ; +#246 = EDGE_CURVE ( 'NONE', #13850, #1640, #4742, .T. ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( 15.83374391612114200, -12.50000000000001100, -13.90106816019734900 ) ) ; +#248 = FACE_OUTER_BOUND ( 'NONE', #9291, .T. ) ; +#249 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -22.46243069294101600, -27.19746277637470700 ) ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 23.88876774546523800, -12.49999999999999300, -14.11547721595827200 ) ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.24871200018998300, 12.92977595461171300 ) ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( 33.74958373914089500, -29.56328676032639200, 25.44987842510718300 ) ) ; +#253 = ORIENTED_EDGE ( 'NONE', *, *, #6494, .F. ) ; +#254 = CARTESIAN_POINT ( 'NONE', ( 30.32933023441461300, -12.49999999999996800, 19.31817011019373700 ) ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 33.41853984290927600, -31.16957887264073800, 25.44541093736543800 ) ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( 10.85400658404714800, -30.74728045053392100, 27.82594195134842300 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( 10.43760902149484500, -19.13834213252518900, 21.64994710253414600 ) ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 14.31000000000000900 ) ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 34.73241201854919100, -22.14342873132343200, -14.53041120837798600 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 7.266196532049495900, -30.64500065140148200, 26.28684562290792600 ) ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999998900, -12.50000000000000900, 7.564513562858118200 ) ) ; +#262 = FACE_OUTER_BOUND ( 'NONE', #9527, .T. ) ; +#263 = AXIS2_PLACEMENT_3D ( 'NONE', #8865, #13334, #82 ) ; +#264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.040834085586084500E-015 ) ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -19.99999999999999300 ) ) ; +#266 = PLANE ( 'NONE', #7734 ) ; +#267 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4999, #8514, #9640, #2932, #10775, #4042, #11883, #5157, #12996, #6284 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001970345620340480500, 0.003940691240680960900, 0.005911036861021441400, 0.007881382481361921800 ), + .UNSPECIFIED. ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( 37.21212761189536200, -20.98383503511135500, 10.80157379512634300 ) ) ; +#269 = ORIENTED_EDGE ( 'NONE', *, *, #5340, .T. ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -96.20446068527157000, 16.38652170087208800 ) ) ; +#271 = TOROIDAL_SURFACE ( 'NONE', #9494, 2.500000000000000000, 2.500000000000000000 ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( 9.035449329546418400, -30.48553761242114000, 27.17702185296282000 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 35.37415503480021100, -29.22440297955784100, 23.89622286122115100 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( 36.90005849816841300, -29.44846291241487900, 23.84213368120232000 ) ) ; +#276 = ADVANCED_FACE ( 'NONE', ( #786, #727 ), #12296, .F. ) ; +#277 = CIRCLE ( 'NONE', #1482, 3.189999999999995100 ) ; +#278 = CARTESIAN_POINT ( 'NONE', ( 25.94799324669229900, -14.97548757892636000, 24.12268729766103400 ) ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 5.592614057720818500, -30.31470499678779600, 25.26125725073344000 ) ) ; +#280 = CARTESIAN_POINT ( 'NONE', ( 15.50410081581019200, -12.50000000000002000, 9.116917043799084300 ) ) ; +#281 = CARTESIAN_POINT ( 'NONE', ( 29.34138593515161700, -32.65804594249843300, 27.47357358305723800 ) ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 11.85151317055015800, -10.83022320980642300, 24.85360924809897700 ) ) ; +#283 = VERTEX_POINT ( 'NONE', #8983 ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 2.756320288712532700, -30.03500415653525500, 22.11349759299205100 ) ) ; +#285 = LINE ( 'NONE', #510, #10938 ) ; +#286 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #977, #3225, #5442 ), + ( #13283, #6578, #14376 ), + ( #7717, #1070, #8859 ), + ( #2159, #9979, #3266 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -1.649779743440653000E-006, 0.0002729874078534130200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9925030584327458900, 1.000000000000000000), + ( 1.000000000000000000, 0.9925108205446887500, 1.000000000000000000), + ( 1.000000000000000000, 0.9925139280347395900, 1.000000000000000000), + ( 1.000000000000000000, 0.9925120726376611700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#287 = CARTESIAN_POINT ( 'NONE', ( 17.51559448793785700, -25.57203575182673200, 22.25469830895992400 ) ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 31.36220696387193000, -30.48385425216540800, 27.00211869245619000 ) ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#290 = CARTESIAN_POINT ( 'NONE', ( 36.83334453986060500, -29.08977353092539500, 21.96434758603685800 ) ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( 13.45067698649139500, -100.0000000000000100, 5.951366538839403500 ) ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( 32.56225631223916400, -20.78196122135576100, 19.17190281847448200 ) ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( 5.538079236920491000, -31.12201595940873800, 24.50313823674400000 ) ) ; +#294 = AXIS2_PLACEMENT_3D ( 'NONE', #1239, #9034, #2333 ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 3.963495437043060800, -29.85278546034019000, 23.78044198889534000 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 33.23664003695808600, -18.54088238239220100, -22.82935076965050000 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 26.44050684946239500, -19.58006586880414100, 22.81303985890503200 ) ) ; +#298 = ORIENTED_EDGE ( 'NONE', *, *, #7146, .T. ) ; +#299 = CARTESIAN_POINT ( 'NONE', ( 28.45631725505148400, -11.22503227170445000, 24.48741346590389900 ) ) ; +#300 = VECTOR ( 'NONE', #9713, 1000.000000000000000 ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -7.665926057968707000, 18.27518988300701600 ) ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 28.89793561247955400, -21.00930500956588900, -22.64926280778742700 ) ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 37.43698787661070100, -11.97697067855702000, -19.82834543978446700 ) ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( 33.94211339065915200, -30.37203768772283800, 25.56830406036773300 ) ) ; +#305 = VERTEX_POINT ( 'NONE', #4509 ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( 23.89800340486433000, -12.50000000000004100, 9.700892450163367500 ) ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( 33.38987173832542500, -30.34587193944377100, 25.93731818683268400 ) ) ; +#308 = CARTESIAN_POINT ( 'NONE', ( 11.06034806949028800, -30.82801193949609000, 27.87666970027441600 ) ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( 11.83608781114265300, -19.44774878093363700, 22.22158926986112300 ) ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 6.486501129498891200, -12.50000000000003700, -16.42357860410896500 ) ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 2.082942314109260500, -11.91160897348690800, -18.88534782946020100 ) ) ; +#312 = CARTESIAN_POINT ( 'NONE', ( 34.19437961975024400, -12.50000000000086300, -14.99819641821100900 ) ) ; +#313 = CARTESIAN_POINT ( 'NONE', ( 5.232394900602199300, -22.83237071993378800, 9.949516784100319800 ) ) ; +#314 = VERTEX_POINT ( 'NONE', #12342 ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( 23.76596615621871700, -12.50000000000002100, 9.793076299809335700 ) ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -7.520606794341284200, 22.50000000000000400 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 36.88256911825323000, -20.20117569639612000, 12.29603669121008000 ) ) ; +#318 = CARTESIAN_POINT ( 'NONE', ( 39.38320432706400000, -10.00000000000000400, -16.36489346375773800 ) ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.23105625617649700, 7.788262581895400800 ) ) ; +#320 = CARTESIAN_POINT ( 'NONE', ( 9.241813390821844700, -30.99654036672651400, 27.15603273035675600 ) ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 35.78857172144096000, -30.32295974144874500, 24.03297623162722400 ) ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 37.79764453067480200, -18.80942187730065000, 8.006624509372489500 ) ) ; +#323 = CIRCLE ( 'NONE', #6193, 2.500000000000000900 ) ; +#324 = VERTEX_POINT ( 'NONE', #5622 ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( 26.70720308668625600, -11.68860824032028000, 24.70225280738490900 ) ) ; +#326 = CARTESIAN_POINT ( 'NONE', ( 5.847764908872721700, -29.45616307947338100, 25.10372211087342000 ) ) ; +#327 = DIRECTION ( 'NONE', ( -1.000000000000000000, 6.070745540409369700E-017, -6.938893903900185800E-016 ) ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 23.83601048566484000, -33.30903614688072200, 26.48081136125346500 ) ) ; +#329 = CARTESIAN_POINT ( 'NONE', ( 17.50735423513282300, -27.96523496585093600, 27.45710953202296200 ) ) ; +#330 = ORIENTED_EDGE ( 'NONE', *, *, #9530, .T. ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( 3.636305534584682900, -28.96848477856590900, 22.31529492729567100 ) ) ; +#332 = EDGE_CURVE ( 'NONE', #12274, #4265, #597, .T. ) ; +#333 = CARTESIAN_POINT ( 'NONE', ( 31.35479008354954900, -30.92900163312349800, 26.90723707285768300 ) ) ; +#334 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( 37.14104290039720300, -30.23062878534817000, 21.75961179835939400 ) ) ; +#336 = CYLINDRICAL_SURFACE ( 'NONE', #9515, 3.189999999999995100 ) ; +#337 = CARTESIAN_POINT ( 'NONE', ( 8.910573860492609900, -22.03500000000001400, 16.90518904591137400 ) ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( 33.35505782100253200, -26.51075822232651900, 17.49344818128680900 ) ) ; +#339 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( 7.905650210628952100, -31.12841247300854500, 26.40297982880178300 ) ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( 4.545751564598524500, -30.96924478692745500, 23.37181461219923800 ) ) ; +#342 = CARTESIAN_POINT ( 'NONE', ( 28.09879898980421600, -10.58758902355957300, -25.10360779842158900 ) ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -19.99999999999987900, 8.005331014629279100 ) ) ; +#344 = ORIENTED_EDGE ( 'NONE', *, *, #4357, .T. ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( 11.58766495105356100, -9.781278335286691200, -24.99999999999999600 ) ) ; +#346 = ADVANCED_FACE ( 'NONE', ( #710 ), #13445, .F. ) ; +#347 = CARTESIAN_POINT ( 'NONE', ( 15.49979224266638600, -12.50000000000002700, 9.119306183993234800 ) ) ; +#348 = CARTESIAN_POINT ( 'NONE', ( 26.84104925032689000, -12.49999999999982400, -22.16326522377750400 ) ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 36.58529985386608300, -10.00000000000000000, -24.53286696177949700 ) ) ; +#350 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7272, #6143, #9551, #2839 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002585045885579680100 ), + .UNSPECIFIED. ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 31.09985322858665700, -23.75824976598470100, 16.58262717058189400 ) ) ; +#352 = CARTESIAN_POINT ( 'NONE', ( 33.26754052289030000, -31.12041425780842000, 25.61726192405688000 ) ) ; +#353 = CARTESIAN_POINT ( 'NONE', ( 11.06012232667332600, -30.79701389999103300, 27.88202382013777800 ) ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 13.26667093379798400, -19.72005061337734600, 22.66692913012196400 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( 15.12984797268205400, -12.50000000000000200, -12.79242524704961400 ) ) ; +#356 = CARTESIAN_POINT ( 'NONE', ( 36.16988456615024500, -10.00000000000000000, -24.86121076501353500 ) ) ; +#357 = CARTESIAN_POINT ( 'NONE', ( 24.88379563804870300, -12.49999999999994100, -12.74918380324176900 ) ) ; +#358 = CARTESIAN_POINT ( 'NONE', ( 4.905708759815807300, -12.50000000000002000, 10.19699770163466600 ) ) ; +#359 = ORIENTED_EDGE ( 'NONE', *, *, #8482, .T. ) ; +#360 = AXIS2_PLACEMENT_3D ( 'NONE', #2869, #10704, #3981 ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( 0.02838215973449123900, 9.894538436513098400, 18.88806036896969700 ) ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( 8.799756875161065800, -95.07596123493894400, 15.09984293018446300 ) ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( 36.47105196375754600, -19.52981501774145900, 13.78926444520040400 ) ) ; +#364 = CARTESIAN_POINT ( 'NONE', ( 22.32590020931202100, -9.999999999999996400, -29.34296677226988200 ) ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( 1.726604274503862600, -10.05375953237826900, -19.17028665471516300 ) ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( 9.228720249812861100, -30.65129665078056200, 27.24733238535256800 ) ) ; +#367 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #500, #6142, #9384, #2680, #10509, #3795, #11637, #4897, #12740, #6035 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979366700, 0.002130928723958733500, 0.003196393085938100000, 0.004261857447917467000 ), + .UNSPECIFIED. ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( 35.25299116948503600, -29.17711455378655900, 23.94813333037516800 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 37.49944171927685900, -21.21979640085447400, 7.921658914490985900 ) ) ; +#370 = FACE_OUTER_BOUND ( 'NONE', #5102, .T. ) ; +#371 = CARTESIAN_POINT ( 'NONE', ( 14.09171237929243100, -19.97950146655691500, 22.84876491868921300 ) ) ; +#372 = CIRCLE ( 'NONE', #5891, 1.200000000000006600 ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( 5.793610666499212400, -30.55483354280081100, 25.33038572235773200 ) ) ; +#374 = CYLINDRICAL_SURFACE ( 'NONE', #1507, 1.200000000000007500 ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( 22.91227961310049500, -24.23560097864063300, 19.98343097353387100 ) ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 2.707799635066764600, -10.00000000000087200, -20.74810897437162500 ) ) ; +#377 = CARTESIAN_POINT ( 'NONE', ( 3.364553487874644100, -30.48430824594748100, 22.35070096455559600 ) ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 31.24981183538326200, -30.31647083301062300, 27.04691976071489600 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 14.34266098580479800, -28.84503334412752200, 29.00759413925343800 ) ) ; +#380 = CARTESIAN_POINT ( 'NONE', ( 7.281892215148896100, -30.27631702058523900, 26.32609603068709700 ) ) ; +#381 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1362, #8021, #4677, #12518 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0005885562342190610900 ), + .UNSPECIFIED. ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 36.40968861557034600, -28.91652059073108600, 22.05536106968066400 ) ) ; +#383 = CIRCLE ( 'NONE', #8639, 10.00000000000000000 ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( 5.922237887215129800, -100.0000000000000100, -1.248825278329977400 ) ) ; +#385 = CARTESIAN_POINT ( 'NONE', ( 37.28271871967830700, -28.56884109773786300, 17.40305655535587800 ) ) ; +#386 = CARTESIAN_POINT ( 'NONE', ( 10.44427334429041000, -30.90293848221204000, 27.66098116475443500 ) ) ; +#387 = FACE_OUTER_BOUND ( 'NONE', #2506, .T. ) ; +#388 = AXIS2_PLACEMENT_3D ( 'NONE', #11290, #4556, #12389 ) ; +#389 = CARTESIAN_POINT ( 'NONE', ( 4.013640386936890200, -30.15791530187187400, 23.86472466526006600 ) ) ; +#390 = CARTESIAN_POINT ( 'NONE', ( 35.70784067159048900, -9.953581993545954600, -24.99181525307156100 ) ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( 5.405988632936742800, -94.84219530202209100, 15.05256616095731400 ) ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( 10.72948806228249000, -10.27119737089973300, -25.00000000000177600 ) ) ; +#393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( 23.43301769295085200, -12.50000000000000200, -14.36355860398022500 ) ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( 32.92179822232080300, -10.00000000000088300, -24.10087060514001000 ) ) ; +#396 = CARTESIAN_POINT ( 'NONE', ( 32.37335629547678900, -12.49999999999991100, 17.26586489815979100 ) ) ; +#397 = CARTESIAN_POINT ( 'NONE', ( 33.25318401718110600, -30.06119349342655400, 25.98015284836270700 ) ) ; +#398 = FACE_OUTER_BOUND ( 'NONE', #1264, .T. ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( 11.16283609017664000, -30.83353854935512900, 27.90655929846613900 ) ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 14.73819993258520000, -19.96871196039097300, 22.98184763709510700 ) ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( 5.458983681272824700, -22.03418683524731500, -15.31477548822091000 ) ) ; +#402 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( 34.16748618294434400, -21.87783992945067600, -16.43596538068748100 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( 22.53685152637479000, -19.89663888651659500, 23.25495554597861100 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( 24.87806969473688700, -94.71799171673301000, 18.69741323345759200 ) ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( 12.86064349584290200, -95.07596123493894400, 17.44017706019703000 ) ) ; +#408 = ORIENTED_EDGE ( 'NONE', *, *, #6090, .T. ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( 35.16685585113377500, -19.00687606814854600, 16.56284624961888600 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 29.32735840597429400, -20.38769525366770100, -25.20277282546932100 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( 9.342184288008875000, -31.01026710824984200, 27.19440054952318400 ) ) ; +#412 = CARTESIAN_POINT ( 'NONE', ( 35.72130704670308900, -30.07251648744362200, 24.18952946327738500 ) ) ; +#413 = FACE_OUTER_BOUND ( 'NONE', #5048, .T. ) ; +#414 = ADVANCED_FACE ( 'NONE', ( #803 ), #11438, .F. ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( 4.086777876496439500, -20.65574947975097300, 14.76363299277253000 ) ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561061092300, 7.000000000000000900, 20.69000000000000100 ) ) ; +#417 = CARTESIAN_POINT ( 'NONE', ( 5.949038287573421800, -29.63671518298261600, 25.29530588162353800 ) ) ; +#418 = ORIENTED_EDGE ( 'NONE', *, *, #2646, .T. ) ; +#419 = CARTESIAN_POINT ( 'NONE', ( 30.75379595517203100, -23.80346722409140300, 16.90519866433478300 ) ) ; +#420 = CARTESIAN_POINT ( 'NONE', ( 3.414700146136768800, -10.00000000000000200, -24.53286696177433500 ) ) ; +#421 = CARTESIAN_POINT ( 'NONE', ( 16.44567791293669100, -97.51587327058031500, 22.05123229016746900 ) ) ; +#422 = CARTESIAN_POINT ( 'NONE', ( 3.939215006182777800, -10.00000000000000000, -22.83012767010392400 ) ) ; +#423 = CARTESIAN_POINT ( 'NONE', ( 3.364476979515364200, -29.23671884873187200, 22.56742895160473900 ) ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( 31.26724460928473400, -30.74849097334924500, 27.00959265746292500 ) ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.469446951953614200E-015, 20.00000000000000000 ) ) ; +#426 = CARTESIAN_POINT ( 'NONE', ( 7.536469174744604900, -31.13271627206019300, 26.17261886412316600 ) ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 37.42751202381291600, -29.87997420540144900, 21.87456381622528300 ) ) ; +#428 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #8039 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #3318, #11167, #4441 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#429 = CARTESIAN_POINT ( 'NONE', ( 37.44091253140411600, -26.01457706525219000, 8.508400210255322400 ) ) ; +#430 = EDGE_LOOP ( 'NONE', ( #7231, #1607, #222, #4756 ) ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -31.29513776008465000, 28.74509265499353800 ) ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( 4.544550443892401100, -29.13200559133651200, 23.69648194991333400 ) ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( 28.47785411153224200, -10.84225361121045400, 24.70743322944748500 ) ) ; +#434 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -95.07595083481818700, 12.92966076378877300 ) ) ; +#435 = CARTESIAN_POINT ( 'NONE', ( 10.28210093596855000, -11.08853774379302400, -25.04696043240726800 ) ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( 31.85937259222131600, -19.18157931286945600, -23.91093930472613100 ) ) ; +#437 = CARTESIAN_POINT ( 'NONE', ( 8.832970448458567600, -28.26503192583802700, 25.48816877369888400 ) ) ; +#438 = ORIENTED_EDGE ( 'NONE', *, *, #12366, .F. ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( 26.44651547136784900, -20.85268358691028500, -23.76436722057541200 ) ) ; +#440 = AXIS2_PLACEMENT_3D ( 'NONE', #14238, #7569, #922 ) ; +#441 = CARTESIAN_POINT ( 'NONE', ( 24.46859718863170800, -12.50000000000003400, 9.153374432623698100 ) ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( 33.25318618663492700, -30.87615515975709400, 25.83646664320471600 ) ) ; +#443 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #7050, #6994, #8197 ), + ( #1530, #9321, #91 ), + ( #12386, #5673, #13492 ), + ( #6798, #199, #7943 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -3.629041511743480400E-015, 0.004625612329664377700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882858400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882858400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882858400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882858400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#444 = ORIENTED_EDGE ( 'NONE', *, *, #7209, .F. ) ; +#445 = CARTESIAN_POINT ( 'NONE', ( 11.16312810143441100, -30.81858041057341100, 27.90928189596279200 ) ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( 16.72278512612574600, -19.18514171854450000, 23.39959804969300400 ) ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( 5.605730899966636600, -12.50000000000023800, -14.46560479624574900 ) ) ; +#448 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -22.48607372150925300, -12.07362420858599700 ) ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( 33.03771592760715200, -12.50000000000206100, -17.21485529290698900 ) ) ; +#450 = LINE ( 'NONE', #627, #14364 ) ; +#451 = AXIS2_PLACEMENT_3D ( 'NONE', #5942, #13752, #7073 ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( 16.51389636241652100, -22.14018086042845800, -27.11476317490777500 ) ) ; +#453 = CARTESIAN_POINT ( 'NONE', ( 30.10903180879935100, -95.07596123493894400, 15.54089610449970700 ) ) ; +#454 = CIRCLE ( 'NONE', #1582, 9.999999999999998200 ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 33.75181956858784800, -20.38410554675180800, 18.02288766509154500 ) ) ; +#456 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -97.04531648070947400, 16.23785755017195200 ) ) ; +#457 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 9.328508425928291100, -30.73513334624730900, 27.27520777440647100 ) ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( 35.27251800632386400, -30.99356236919816300, 23.64444656855879500 ) ) ; +#460 = LINE ( 'NONE', #2760, #6997 ) ; +#461 = ORIENTED_EDGE ( 'NONE', *, *, #4680, .T. ) ; +#462 = CARTESIAN_POINT ( 'NONE', ( 17.56133793030465300, -30.66176281334875100, 28.85677374700785700 ) ) ; +#463 = VECTOR ( 'NONE', #14285, 1000.000000000000000 ) ; +#464 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10098, #2271, #11225, #4496, #12332, #5608, #13434, #6740, #144, #7880, #1229, #9019, #2318, #10144, #3430, #11271, #4543, #12372, #5658, #13477 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.01673341795366691000, 0.01860504695638035700, 0.02047667595909380100, 0.02234830496180724800, 0.02421993396452068800, 0.02796319196994756900, 0.02983482097266100500, 0.03077063547401772500, 0.03123854272469608500, 0.03170644997537444600 ), + .UNSPECIFIED. ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( 35.28860080474103700, -95.01597796246964800, 10.11858592181173900 ) ) ; +#466 = CARTESIAN_POINT ( 'NONE', ( 6.147061697715654900, -30.91414521001624400, 25.35262281304815000 ) ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( 34.89951295673629500, -22.72672092364197400, 9.189610863789399200 ) ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( 8.859054046348900300, -12.49999999999947800, 18.61362808579678000 ) ) ; +#469 = CARTESIAN_POINT ( 'NONE', ( 8.243832278247360500, -12.53173373195724100, -24.59741042816053300 ) ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( 17.46403690155395000, -27.96616264927604000, 27.45684688047060000 ) ) ; +#471 = CARTESIAN_POINT ( 'NONE', ( 11.61160146261156900, -20.40038510989241200, -25.65024227911158800 ) ) ; +#472 = AXIS2_PLACEMENT_3D ( 'NONE', #9555, #2844, #10682 ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( 3.881192018479686600, -30.75819079622518600, 22.49853733993877500 ) ) ; +#474 = VECTOR ( 'NONE', #10493, 1000.000000000000000 ) ; +#475 = ORIENTED_EDGE ( 'NONE', *, *, #8266, .T. ) ; +#476 = CARTESIAN_POINT ( 'NONE', ( 31.04908267019503400, -30.29999236615442400, 27.13265463326352400 ) ) ; +#477 = LINE ( 'NONE', #270, #973 ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( 6.763359963026559300, -18.54088238239249300, -22.82935076963506700 ) ) ; +#479 = CARTESIAN_POINT ( 'NONE', ( 7.456768303661576200, -30.50618908879813400, 26.42090146439798600 ) ) ; +#480 = CARTESIAN_POINT ( 'NONE', ( 36.37845623967782400, -30.62179163567351000, 21.75518198668570200 ) ) ; +#481 = CARTESIAN_POINT ( 'NONE', ( 22.34990777206994700, -33.18274856558013400, 28.41225594090785800 ) ) ; +#482 = EDGE_LOOP ( 'NONE', ( #10438, #2761, #13197, #2128 ) ) ; +#483 = CARTESIAN_POINT ( 'NONE', ( 4.264246154405580700, -30.47806648729846700, 23.96311507216570300 ) ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( 32.39947199591910700, -7.933499106966760200, 25.00000000000000700 ) ) ; +#485 = CARTESIAN_POINT ( 'NONE', ( 9.234115207170035000, -12.19189320633215200, -24.99999999999999600 ) ) ; +#486 = CIRCLE ( 'NONE', #9608, 7.500000000000000900 ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( 26.89864197181921300, -19.17919965306923700, -26.61854056014545800 ) ) ; +#488 = ADVANCED_FACE ( 'NONE', ( #551 ), #8354, .F. ) ; +#489 = CARTESIAN_POINT ( 'NONE', ( 5.107815534741201100, -29.23672032206184200, 25.36000330380138100 ) ) ; +#490 = ORIENTED_EDGE ( 'NONE', *, *, #9825, .T. ) ; +#491 = CARTESIAN_POINT ( 'NONE', ( 25.58905238382764900, -12.49999999999986100, -22.55331039556499900 ) ) ; +#492 = CARTESIAN_POINT ( 'NONE', ( 31.22071890076102100, -19.11837620420346100, 20.63626614147649700 ) ) ; +#493 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2944, #2998, #10842 ), + ( #4110, #11948, #5221 ), + ( #13059, #6351, #14160 ), + ( #7487, #849, #8631 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01394155129321603500, 0.01907858170925263300 ), + ( 0.1647082622626197500, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9208870082447095900, 0.7598390309371716400, 1.000000000000000000), + ( 0.9208908081281499400, 0.7598505661309384900, 1.000000000000000000), + ( 0.9208886195871228700, 0.7598439224416753100, 1.000000000000000000), + ( 0.9208785904453787900, 0.7598134772727254100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#494 = AXIS2_PLACEMENT_3D ( 'NONE', #2166, #4391, #12223 ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( 33.39880306777832400, -23.35046822983980500, 13.66290794130880600 ) ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 33.00614254497069300, -29.82626038909051800, 26.04200170453896800 ) ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( 2.608686803936616400, -28.86880190225063500, 15.22480331321570700 ) ) ; +#498 = VERTEX_POINT ( 'NONE', #8947 ) ; +#499 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#500 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 15.51856112887630200 ) ) ; +#501 = CARTESIAN_POINT ( 'NONE', ( 15.00381276546627300, -12.49999999999999300, -12.13972429767589600 ) ) ; +#502 = CARTESIAN_POINT ( 'NONE', ( 32.45272638472710700, -21.44625358625219700, -19.53397894800723500 ) ) ; +#503 = CARTESIAN_POINT ( 'NONE', ( 24.61141320525819500, -12.50000000000000400, -13.35301563613054500 ) ) ; +#504 = LINE ( 'NONE', #1726, #960 ) ; +#505 = CARTESIAN_POINT ( 'NONE', ( 22.60306456692114100, -19.87568216611861200, 23.25829123793066700 ) ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( 33.65843832267228200, -95.07596123493894400, 14.96379007074433400 ) ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 30.34082039616114600, -30.47848671870745100, 27.42986472538639800 ) ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -100.0000000000000100, -25.63802908547508300 ) ) ; +#509 = CARTESIAN_POINT ( 'NONE', ( 32.39500135484319500, -19.86705185094512800, 19.52062297747516700 ) ) ; +#510 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( 9.341501671992494600, -30.40837727052019400, 27.30213950295154700 ) ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( 35.52337404162116700, -29.75996061029442100, 24.26580177840365600 ) ) ; +#513 = ORIENTED_EDGE ( 'NONE', *, *, #11630, .F. ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.723952627011016100, -19.19887574203255600 ) ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( 15.54658916618843600, -17.63482393569085000, 23.65377454717897300 ) ) ; +#516 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -90.07596123493895800, -4.350951650170483900 ) ) ; +#517 = CARTESIAN_POINT ( 'NONE', ( 6.095961314857326800, -30.06313109243361500, 25.57181897340420200 ) ) ; +#518 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 16.11123225453479100, -12.49999999999999600, 9.707302698246932600 ) ) ; +#520 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 10.00000000000000000, 25.00000000000000400 ) ) ; +#521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#522 = CARTESIAN_POINT ( 'NONE', ( 3.133739849743689900, -29.67830240742409800, 22.72557466266862000 ) ) ; +#523 = CARTESIAN_POINT ( 'NONE', ( -1.951978077046687700, -10.00000000000000400, 7.973317983541562600 ) ) ; +#524 = EDGE_CURVE ( 'NONE', #4566, #7285, #11067, .T. ) ; +#525 = ORIENTED_EDGE ( 'NONE', *, *, #14235, .T. ) ; +#526 = CARTESIAN_POINT ( 'NONE', ( 31.07016502515561700, -30.66581079289446500, 27.11624627217745600 ) ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( 2.299719309790587500, -18.75819225686322200, -13.76201140360981300 ) ) ; +#528 = CARTESIAN_POINT ( 'NONE', ( 7.540454434436043100, -29.91690864546901100, 26.38011802324570700 ) ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( 37.30662858021430100, -29.55944880966319500, 22.08548968114661500 ) ) ; +#530 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#531 = CARTESIAN_POINT ( 'NONE', ( 4.516884512626520000, -29.36387880121798600, 23.95826372456619800 ) ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( 39.30642925586635500, -10.53368772315637800, -16.03479577056332100 ) ) ; +#533 = CARTESIAN_POINT ( 'NONE', ( 35.09583703867981100, -16.55998731848606600, -21.43378696646594200 ) ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 17.44205019309341500, -33.35025653084936400, 26.50741664928542500 ) ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( 23.63983126180325900, -20.13422152580749700, -26.78693668347629900 ) ) ; +#536 = AXIS2_PLACEMENT_3D ( 'NONE', #9985, #3271, #11119 ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 23.03896582579708200, -12.50000000000000400, -14.48956382313461500 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( 37.68747708513865300, -18.85611883970082300, 9.915086206252363300 ) ) ; +#539 = FACE_OUTER_BOUND ( 'NONE', #11445, .T. ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( 34.62507096923003000, -12.49999999999980500, 12.87693522568862800 ) ) ; +#541 = CARTESIAN_POINT ( 'NONE', ( 33.11239803103286800, -30.61646419895440000, 26.06814555692377100 ) ) ; +#542 = CARTESIAN_POINT ( 'NONE', ( 2.580480534841040500, -28.97208599018177500, 8.247879060005551800 ) ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#544 = CARTESIAN_POINT ( 'NONE', ( 6.763359963026559300, -18.54088238239249300, -22.82935076963506700 ) ) ; +#545 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9647, #936, #3140, #10991, #4257, #12087, #5361, #13201, #6490, #14290 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001702089827554198500, 0.003404179655108397000, 0.005106269482662595700, 0.006808359310216794000 ), + .UNSPECIFIED. ) ; +#546 = AXIS2_PLACEMENT_3D ( 'NONE', #7254, #7355, #6225 ) ; +#547 = CARTESIAN_POINT ( 'NONE', ( -6.557304062897697700E-016, -12.50000000000001100, 10.14164662228683300 ) ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( 32.84679057780857600, -29.80944317329942100, 26.12639779911484800 ) ) ; +#549 = CARTESIAN_POINT ( 'NONE', ( 10.83977579956017400, -99.99999999999998600, -36.41976309893832600 ) ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( 30.40870616211422500, -19.45918532472083800, 21.07448543008719700 ) ) ; +#551 = FACE_OUTER_BOUND ( 'NONE', #13658, .T. ) ; +#552 = CARTESIAN_POINT ( 'NONE', ( 37.47662013306811700, -21.15657473739422300, 8.699370380502786700 ) ) ; +#553 = CARTESIAN_POINT ( 'NONE', ( 9.631722015035174800, -30.83141143062354000, 27.37691550675532800 ) ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( 35.39854670641888400, -30.76852141842978800, 23.97830106858982500 ) ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( 32.13807457134920800, -93.14520756572234500, 21.11094159497447400 ) ) ; +#556 = ADVANCED_FACE ( 'NONE', ( #741 ), #2798, .T. ) ; +#557 = CARTESIAN_POINT ( 'NONE', ( 2.913418071806144200, -24.62443967611609000, 10.82115605377056700 ) ) ; +#558 = CARTESIAN_POINT ( 'NONE', ( 32.98761298303121200, -10.21891901494710100, 23.35039710829027700 ) ) ; +#559 = CARTESIAN_POINT ( 'NONE', ( 6.324082100418082500, -31.14750408028963200, 25.25262510182672700 ) ) ; +#560 = VECTOR ( 'NONE', #4038, 1000.000000000000000 ) ; +#561 = CARTESIAN_POINT ( 'NONE', ( 39.52661047827270800, -11.89371231866663300, 7.970623748233627700 ) ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( 11.10206438751265200, -23.99069499043328000, 18.24108829007123600 ) ) ; +#563 = DIRECTION ( 'NONE', ( 0.8879318508668697700, 0.4599750299919932500, 0.0000000000000000000 ) ) ; +#564 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -7.511547099454119800, 20.00000000000000000 ) ) ; +#565 = CARTESIAN_POINT ( 'NONE', ( 0.0001895096005633442300, -9.999999999999994700, 8.108285739654592200 ) ) ; +#566 = CARTESIAN_POINT ( 'NONE', ( 31.04914071786281200, -31.04541665982798500, 27.00135229734057400 ) ) ; +#567 = CARTESIAN_POINT ( 'NONE', ( 12.73701615960722000, -28.65067221269347900, 28.69625872814606300 ) ) ; +#568 = CARTESIAN_POINT ( 'NONE', ( 7.847613636954853300, -30.68368966582604400, 26.59071352612131600 ) ) ; +#569 = CARTESIAN_POINT ( 'NONE', ( 36.40709598670725500, -30.62577895116475800, 21.91878659688750400 ) ) ; +#570 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8337, #2708, #9452, #2752, #10590, #3868, #11707, #4971, #12811, #6099 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979365000, 0.002130928723958730500, 0.003196393085938095700, 0.004261857447917461800 ), + .UNSPECIFIED. ) ; +#571 = AXIS2_PLACEMENT_3D ( 'NONE', #6496, #8775, #2080 ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( 4.588762115754176000, -30.85092082675550200, 23.78709457753011900 ) ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -97.04531648070948800, 16.23785755017195600 ) ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( 29.55503684636051900, -30.74306885416911300, 27.69370174132536300 ) ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, -11.53324907984514000 ) ) ; +#576 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 24.19561281532491700, -20.77945660458759700, -24.28498844191469500 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 37.28324499324009600, -28.57367335202718200, 17.43650536225953500 ) ) ; +#579 = EDGE_LOOP ( 'NONE', ( #8314, #9013, #1280, #1113, #3510, #3661, #11708, #7052, #11222, #10011 ) ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( 24.80623032694325800, -12.50000000000000400, 8.559150979040318000 ) ) ; +#581 = CARTESIAN_POINT ( 'NONE', ( 32.90297713017935900, -29.79379506071579800, 26.08793965445262200 ) ) ; +#582 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 6.938893903907227400E-016 ) ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( 34.77538236175202300, -21.94852208389794900, -20.64293793621473600 ) ) ; +#585 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -96.37139523553905500, 5.695249483684505300 ) ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, -99.99999999999998600, -2.486141987672546800E-014 ) ) ; +#587 = CARTESIAN_POINT ( 'NONE', ( 34.92496649449940100, -29.25735626782844900, 24.32854259928243600 ) ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( 37.87392192486273500, -27.37112670110127200, 6.613704577171654700 ) ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( 29.11380945783362200, -19.14431965246348700, 21.88795305554098300 ) ) ; +#590 = EDGE_LOOP ( 'NONE', ( #2831, #2277, #8638, #12380, #12406, #12544, #12569, #12738, #12924, #1128, #8368, #13109, #13151, #13258, #13290, #13407 ) ) ; +#591 = CARTESIAN_POINT ( 'NONE', ( 31.45802328102828600, -20.20234334224371900, 20.19473999767996700 ) ) ; +#592 = CARTESIAN_POINT ( 'NONE', ( 9.633856009762002500, -30.56784451981662800, 27.41773238744488600 ) ) ; +#593 = CARTESIAN_POINT ( 'NONE', ( 35.26000094535967800, -29.35076273607661100, 24.14319430910912000 ) ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -95.28490972493071400, 8.995309444720998500 ) ) ; +#595 = CARTESIAN_POINT ( 'NONE', ( 27.25477261372468300, -97.50591815126243500, 21.65948517488728300 ) ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( 27.01093619965347500, -11.07180489606666100, 24.81101187876802100 ) ) ; +#597 = CIRCLE ( 'NONE', #2095, 10.00000000000000400 ) ; +#598 = CARTESIAN_POINT ( 'NONE', ( 9.661303857687357800, -20.37056247578211200, 20.96019825669354800 ) ) ; +#599 = CARTESIAN_POINT ( 'NONE', ( 28.07928388850715300, -9.685657917463542400, 25.00000000000000000 ) ) ; +#600 = CARTESIAN_POINT ( 'NONE', ( 6.150967032914905100, -30.34865752001447300, 25.63326749721592500 ) ) ; +#601 = CARTESIAN_POINT ( 'NONE', ( 39.99981048849954800, -10.00000000000033900, 8.108286221379692900 ) ) ; +#602 = CARTESIAN_POINT ( 'NONE', ( 11.87529105013501700, -12.50000000000030000, 20.72723772905031600 ) ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 11.98487419884252400, -10.15232558920095800, 24.97314088877156000 ) ) ; +#604 = ORIENTED_EDGE ( 'NONE', *, *, #8223, .F. ) ; +#605 = FACE_OUTER_BOUND ( 'NONE', #4454, .T. ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( 0.4904708311945371600, -11.89253978583808400, 8.798915771610369400 ) ) ; +#607 = CARTESIAN_POINT ( 'NONE', ( 30.96884145467050300, -30.57298675063521300, 27.17160552279788600 ) ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( 12.89529859413389300, -27.28474993656827200, 21.23686369781083300 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( 7.898073660570787500, -30.06068367632530400, 26.60552416458148200 ) ) ; +#610 = CARTESIAN_POINT ( 'NONE', ( 36.80523403483138600, -29.18901748760984600, 22.26699467317321500 ) ) ; +#611 = AXIS2_PLACEMENT_3D ( 'NONE', #1034, #8820, #2119 ) ; +#612 = CARTESIAN_POINT ( 'NONE', ( 33.23664003695829900, -18.54088238239223000, -22.82935076965022600 ) ) ; +#613 = CARTESIAN_POINT ( 'NONE', ( 4.344784341906397200, -29.81592392328520400, 24.17754164059406800 ) ) ; +#614 = CYLINDRICAL_SURFACE ( 'NONE', #5930, 1.200000000000006600 ) ; +#615 = CARTESIAN_POINT ( 'NONE', ( 14.38007728734475400, -31.98974796044122100, 20.80473854314248100 ) ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 42.49911174217898900, -95.07596123493894400, -4.542352223618807200 ) ) ; +#617 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#618 = ORIENTED_EDGE ( 'NONE', *, *, #6574, .F. ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( 34.21851553603306000, -100.0000000000000100, -1.650587127058558400 ) ) ; +#620 = LINE ( 'NONE', #6228, #158 ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( 29.55537938794773500, -30.87598625896443500, 27.66780686764743200 ) ) ; +#622 = CARTESIAN_POINT ( 'NONE', ( 33.91270741566342700, -100.0000000000000700, 19.14605732016812900 ) ) ; +#623 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#624 = ADVANCED_FACE ( 'NONE', ( #539 ), #3782, .T. ) ; +#625 = CARTESIAN_POINT ( 'NONE', ( 22.45910818622241200, -30.66221337616255800, 28.85669430062727900 ) ) ; +#626 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -12.49999999999999800, -22.94081745177113900 ) ) ; +#627 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -9.897237155510822500E-015, 25.00000000000000000 ) ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 34.33187711389582100, -23.05888006319024100, 11.57350517800836300 ) ) ; +#629 = CARTESIAN_POINT ( 'NONE', ( 33.02171652274160600, -30.45373553711544500, 26.15906555889269600 ) ) ; +#630 = CARTESIAN_POINT ( 'NONE', ( 4.849604375360051700, -10.01030339717064200, 22.66968200243134700 ) ) ; +#631 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999986700, -95.07596123493894400, 11.50239124669686000 ) ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 39.98584498481541500, 8.388649503522392700, 20.39431017161785300 ) ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( 17.09247520614104900, -20.76351822400576800, -24.39789867023939300 ) ) ; +#634 = CIRCLE ( 'NONE', #5979, 2.499999999999998700 ) ; +#635 = VERTEX_POINT ( 'NONE', #1110 ) ; +#636 = VECTOR ( 'NONE', #12186, 1000.000000000000000 ) ; +#637 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#638 = CARTESIAN_POINT ( 'NONE', ( 35.73952215022138300, -29.06213451306590700, 23.29608932363372300 ) ) ; +#639 = CARTESIAN_POINT ( 'NONE', ( 27.19809169313296600, -20.01164605174416500, 22.47712610394879800 ) ) ; +#640 = ORIENTED_EDGE ( 'NONE', *, *, #5249, .T. ) ; +#641 = CARTESIAN_POINT ( 'NONE', ( 29.22617750844267800, -94.73950499739400800, 17.74757269213396800 ) ) ; +#642 = DIRECTION ( 'NONE', ( -0.4544389162871337900, -0.8772449844731582400, -0.1546819594537901500 ) ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 9.836644533053776800, -30.92636102619587000, 27.43025125296859200 ) ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( 35.57604466665202400, -30.39655085253116300, 24.23823622391245500 ) ) ; +#645 = CARTESIAN_POINT ( 'NONE', ( 36.07615936669539300, -94.27290945639595100, 6.529463264191373500 ) ) ; +#646 = FACE_OUTER_BOUND ( 'NONE', #2136, .T. ) ; +#647 = ORIENTED_EDGE ( 'NONE', *, *, #5471, .F. ) ; +#648 = CARTESIAN_POINT ( 'NONE', ( 14.96996094593346300, -19.96530867676110100, 23.02462242810851800 ) ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 6.332485485843886200, -29.58409808462874200, 25.51656268526148000 ) ) ; +#650 = CARTESIAN_POINT ( 'NONE', ( 41.93220636377168400, -10.00000000000000500, 8.911384885257540100 ) ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( 16.56698230704897400, -12.50000000000001200, 9.955384086268731300 ) ) ; +#652 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.734723475976807100E-016 ) ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( -1.540373325519016000, -10.00000000000000000, 12.05610097516518800 ) ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( 30.95909365769278700, -30.95923162425037100, 27.08113593751418300 ) ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( 8.989763329911109900, -20.47725215763469100, 20.46587052945950400 ) ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 8.059202851311122000, -30.90072310367402500, 26.62071363242876700 ) ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( 36.80529124025421300, -30.42530596348570500, 22.04632166999298800 ) ) ; +#658 = LINE ( 'NONE', #7215, #9537 ) ; +#659 = VERTEX_POINT ( 'NONE', #13631 ) ; +#660 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -95.07596123493891600, 11.50239124669685800 ) ) ; +#661 = AXIS2_PLACEMENT_3D ( 'NONE', #9532, #1723, #2777 ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( 4.831028245016055300, -31.02535922654649200, 23.73079457175488100 ) ) ; +#663 = CARTESIAN_POINT ( 'NONE', ( 9.919812202529383800, -32.73480565852712900, 26.98692659285350000 ) ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( 36.76991548009650000, -89.80234706481394400, 0.4972597976204369300 ) ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -16.29999999999998300 ) ) ; +#666 = ORIENTED_EDGE ( 'NONE', *, *, #9890, .F. ) ; +#667 = CARTESIAN_POINT ( 'NONE', ( 30.80850665730461200, -22.03500000000001400, 17.19458116506441300 ) ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( 29.24809486241500900, -30.74118436939386700, 27.79436693628209900 ) ) ; +#669 = CARTESIAN_POINT ( 'NONE', ( 26.12797249531479000, -97.40649683660852500, 21.90672759567023700 ) ) ; +#670 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561061037400, 7.359625249920310500, 20.69000000000000100 ) ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( 27.01633931213871900, -11.08451556678311400, 24.80877064457780900 ) ) ; +#672 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#673 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.500000000000000000, 22.50000000000000000 ) ) ; +#674 = VECTOR ( 'NONE', #4996, 1000.000000000000000 ) ; +#675 = CARTESIAN_POINT ( 'NONE', ( 34.96470798944731900, -12.49999999999954900, 11.34715824044202700 ) ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( 32.90862502749362800, -31.14657625809144600, 25.85833107374830300 ) ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( 28.99987110608861200, -10.12604878045761000, -25.00000000000029800 ) ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( 22.35960462362702800, -27.96255689439422200, 27.45771657700752000 ) ) ; +#679 = DIRECTION ( 'NONE', ( -0.8646911947423466800, 0.005406040221160496100, -0.5022747380310702600 ) ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( 15.64584215089056900, -12.50000000000076900, -22.80402495453513400 ) ) ; +#681 = ORIENTED_EDGE ( 'NONE', *, *, #2790, .F. ) ; +#682 = CARTESIAN_POINT ( 'NONE', ( 15.20970908348758700, -17.87332776914528100, 23.57675323419425000 ) ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 36.22269455448574900, -28.94925451504114700, 22.45362942357472800 ) ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( 3.756871313281488600, -99.99999999999997200, 17.91973306515990000 ) ) ; +#685 = CARTESIAN_POINT ( 'NONE', ( 25.76489788849984200, -19.70717800605637400, 22.93200860487435800 ) ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 13.62319401264877800, -12.50000000000030600, 21.44532315146285500 ) ) ; +#687 = CARTESIAN_POINT ( 'NONE', ( -2.653849325001927800E-014, -7.502374582601198900, 20.43868351343692400 ) ) ; +#688 = CARTESIAN_POINT ( 'NONE', ( 2.500000000002387000, -20.00224778413737800, -11.65104335234207700 ) ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( 9.833091253225848800, -30.70070162203368000, 27.48103115290078000 ) ) ; +#690 = CARTESIAN_POINT ( 'NONE', ( 35.01321989810654900, -29.23712173370652700, 24.23364407590452200 ) ) ; +#691 = CARTESIAN_POINT ( 'NONE', ( 8.610636672567833800, -23.71895917018722600, 16.30029879121303800 ) ) ; +#692 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -93.58403201387058300, 0.4683135298466172300 ) ) ; +#693 = CARTESIAN_POINT ( 'NONE', ( 2.333448238535406700, -18.85605695118889700, 9.911286740405417500 ) ) ; +#694 = ADVANCED_FACE ( 'NONE', ( #387 ), #374, .F. ) ; +#695 = CARTESIAN_POINT ( 'NONE', ( 2.197909031311721300, -18.79507155131698300, 7.865351378449189700 ) ) ; +#696 = CARTESIAN_POINT ( 'NONE', ( 33.60553684150959000, -28.44319316509129400, 24.09943335096766900 ) ) ; +#697 = CARTESIAN_POINT ( 'NONE', ( 6.337520860450196000, -30.57006436307828800, 25.71280415246947700 ) ) ; +#698 = CARTESIAN_POINT ( 'NONE', ( 36.81693621171950800, -18.67547186181549900, -17.24239262330405300 ) ) ; +#699 = CARTESIAN_POINT ( 'NONE', ( 39.16612541759949600, -11.88888654326976800, 11.56250592311469200 ) ) ; +#700 = AXIS2_PLACEMENT_3D ( 'NONE', #14296, #7633, #986 ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( 13.55348452862181600, -24.14731641308882400, 19.35619270286081000 ) ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 1.506429253914778300, -9.999999999998172100, 15.28103927347567200 ) ) ; +#703 = EDGE_CURVE ( 'NONE', #4778, #314, #454, .T. ) ; +#704 = CARTESIAN_POINT ( 'NONE', ( 30.76210605592439500, -30.45162977873575400, 27.26126172447939000 ) ) ; +#705 = CARTESIAN_POINT ( 'NONE', ( 4.410962720022316000, -28.86879578465301300, 23.39833498765125000 ) ) ; +#706 = CARTESIAN_POINT ( 'NONE', ( 8.059205663344934900, -30.30640227390915000, 26.72551781623174000 ) ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 36.22408728514923800, -29.00520975992385400, 22.61524184624558500 ) ) ; +#708 = AXIS2_PLACEMENT_3D ( 'NONE', #8357, #9475, #582 ) ; +#709 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.08917251752038200, 7.821153000266952500 ) ) ; +#710 = FACE_OUTER_BOUND ( 'NONE', #6651, .T. ) ; +#711 = CARTESIAN_POINT ( 'NONE', ( 4.373189970926519600, -30.13676218293398900, 24.28964125584875300 ) ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( 9.223157239009655200, -38.09223847783388100, 17.52858580492626600 ) ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( 35.78186566508352900, -95.07596123493894400, 10.89148259895513400 ) ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, -10.09225497943630700, 9.459907970103229100 ) ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( 26.57608945946901700, -100.0000000000000100, 5.963509649343834000 ) ) ; +#716 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8910, #1121, #34, #2213, #10029, #3317, #6857, #247, #7999, #1338, #9134, #2428, #10259, #3542, #11384, #4653 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004988323141682236100, 0.0009976646283364472100, 0.001995329256672889700, 0.002494161570841113900, 0.002992993885009338600, 0.003491826199177562900, 0.003990658513345787100 ), + .UNSPECIFIED. ) ; +#717 = CARTESIAN_POINT ( 'NONE', ( 29.24740882511874300, -30.82402811963067500, 27.78080741184593800 ) ) ; +#718 = DIRECTION ( 'NONE', ( 0.8967904746269012000, 0.0000000000000000000, 0.4424554719047525400 ) ) ; +#719 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( 24.02817656821129700, -30.69646541323904300, 28.80167723652927900 ) ) ; +#721 = AXIS2_PLACEMENT_3D ( 'NONE', #4264, #12092, #5366 ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( 2.566582175178215400, -29.93152987289958100, 21.57006261513518600 ) ) ; +#723 = CIRCLE ( 'NONE', #2263, 3.189999999999995100 ) ; +#724 = CARTESIAN_POINT ( 'NONE', ( 5.079484036836326800, -20.28809933266904900, -13.23502275209403200 ) ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( 24.93162546946164700, -12.49999999999997900, 8.163394277073727800 ) ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 32.71785773507969000, -30.27631882895229900, 26.32601659925328600 ) ) ; +#727 = FACE_OUTER_BOUND ( 'NONE', #8056, .T. ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( 29.90029944354759600, -10.54191156036084300, -24.99999999999999600 ) ) ; +#729 = CARTESIAN_POINT ( 'NONE', ( 2.499999918618690300, -29.71061042947956200, 21.60901691940275500 ) ) ; +#730 = PLANE ( 'NONE', #9368 ) ; +#731 = CARTESIAN_POINT ( 'NONE', ( 16.72532479665519000, -12.50000000000000500, -14.42341799047742300 ) ) ; +#732 = CARTESIAN_POINT ( 'NONE', ( 9.188054874772746000, -11.82529355046295000, -25.00000000000000400 ) ) ; +#733 = CARTESIAN_POINT ( 'NONE', ( 11.86491130159745900, -10.33528997321724500, 24.94087933136076900 ) ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 24.28111448609837800, -19.43840280149888900, 23.24734866180008900 ) ) ; +#735 = CARTESIAN_POINT ( 'NONE', ( 17.02248501800527000, -12.50000000000002700, 10.09426807953985500 ) ) ; +#736 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.50836345880590300, 10.00775520629629000 ) ) ; +#737 = CARTESIAN_POINT ( 'NONE', ( 26.00066813880626200, -20.01385634412526200, 22.81368892163734000 ) ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( 10.24083340857487200, -30.92240371875581300, 27.58362432514212900 ) ) ; +#739 = CARTESIAN_POINT ( 'NONE', ( 35.44690386297707400, -30.16984554739156400, 24.47229133016081100 ) ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( 7.908787822454324400, -12.49999999999864300, 17.61078658832232300 ) ) ; +#741 = FACE_OUTER_BOUND ( 'NONE', #2195, .T. ) ; +#742 = AXIS2_PLACEMENT_3D ( 'NONE', #4315, #1041, #8829 ) ; +#743 = CARTESIAN_POINT ( 'NONE', ( 7.640168690032434800, -19.09658576696636000, 19.77673627466584000 ) ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( 2.397647376188643900, -19.58701674615267100, 7.935102692219947700 ) ) ; +#745 = CARTESIAN_POINT ( 'NONE', ( 39.14607443874032100, -11.88876921271344100, 11.65689024409814300 ) ) ; +#746 = CARTESIAN_POINT ( 'NONE', ( 6.477144148536640800, -29.68880625911264600, 25.66752280045839600 ) ) ; +#747 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#748 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6795, #11284, #197 ), + ( #7940, #1277, #9076 ), + ( #2374, #10202, #3482 ), + ( #11328, #4598, #12428 ), + ( #5714, #13530, #6840 ), + ( #232, #7983, #1321 ), + ( #9118, #2414, #10244 ), + ( #3529, #11371, #4642 ), + ( #12479, #5764, #13574 ), + ( #6889, #281, #8031 ), + ( #1372, #9167, #2461 ), + ( #10286, #3579, #11418 ), + ( #4684, #12528, #5813 ), + ( #13620, #6937, #328 ), + ( #8081, #1416, #9215 ), + ( #2512, #10328, #3622 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -8.572339192270897300E-005, 0.001710880891694096100, 0.003507485175310901100, 0.005304089458927706300, 0.007100693742544511100, 0.01069390230977812100, 0.01249050659339492500, 0.01428711087701173100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7865557600367215600, 1.000000000000000000), + ( 1.000000000000000000, 0.7877005115777248000, 1.000000000000000000), + ( 1.000000000000000000, 0.7885680324414354700, 1.000000000000000000), + ( 1.000000000000000000, 0.7899639056181508900, 1.000000000000000000), + ( 1.000000000000000000, 0.7904777353251514200, 1.000000000000000000), + ( 1.000000000000000000, 0.7913588659595184300, 1.000000000000000000), + ( 1.000000000000000000, 0.7916890699110388200, 1.000000000000000000), + ( 1.000000000000000000, 0.7922828863793935900, 1.000000000000000000), + ( 1.000000000000000000, 0.7925358944421176900, 1.000000000000000000), + ( 1.000000000000000000, 0.7931848320830758900, 1.000000000000000000), + ( 1.000000000000000000, 0.7935002611620910500, 1.000000000000000000), + ( 1.000000000000000000, 0.7938385292871862300, 1.000000000000000000), + ( 1.000000000000000000, 0.7939174126816898000, 1.000000000000000000), + ( 1.000000000000000000, 0.7940484445074692500, 1.000000000000000000), + ( 1.000000000000000000, 0.7940998031415215100, 1.000000000000000000), + ( 1.000000000000000000, 0.7941268098083120700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#749 = ORIENTED_EDGE ( 'NONE', *, *, #10962, .T. ) ; +#750 = CARTESIAN_POINT ( 'NONE', ( 38.49356353055785000, -9.999999999996340700, 15.28105725279274400 ) ) ; +#751 = CARTESIAN_POINT ( 'NONE', ( 13.30879240382553300, -12.50000000000001800, 21.33793473045011500 ) ) ; +#752 = CARTESIAN_POINT ( 'NONE', ( 35.88451359666393600, -12.14628896229498900, -21.79085664395422500 ) ) ; +#753 = CARTESIAN_POINT ( 'NONE', ( 3.182337966443410200, -18.67552119275591900, -17.24026042147601600 ) ) ; +#754 = CARTESIAN_POINT ( 'NONE', ( 4.977374985951443300, -11.88044556060048000, 19.75000274358978200 ) ) ; +#755 = CARTESIAN_POINT ( 'NONE', ( 30.76994511268241800, -30.80572720342902900, 27.21714013763545000 ) ) ; +#756 = CARTESIAN_POINT ( 'NONE', ( 6.645009750703112100, -26.51077841581037500, 17.49351486139816500 ) ) ; +#757 = CARTESIAN_POINT ( 'NONE', ( 8.369594154970645400, -31.06316961690848200, 26.70131850392576900 ) ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( 37.03710235792059500, -30.08776437105703000, 22.42356831490237900 ) ) ; +#759 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.23105625617649700, 7.788262581895400800 ) ) ; +#760 = ORIENTED_EDGE ( 'NONE', *, *, #10003, .T. ) ; +#761 = CARTESIAN_POINT ( 'NONE', ( 3.646861196347039400, -93.88192333451047500, 5.240109433606299700 ) ) ; +#762 = CARTESIAN_POINT ( 'NONE', ( 4.832069074296865300, -29.19950344940163200, 24.05183204545436800 ) ) ; +#763 = CARTESIAN_POINT ( 'NONE', ( 7.830380765053005700, -31.34811569512452000, 17.73981487543508000 ) ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 27.03775804390716800, -95.07596123493893000, 9.319683354837806600 ) ) ; +#765 = CARTESIAN_POINT ( 'NONE', ( 1.277502522607818500, -10.39297228422173400, 16.15596888281489600 ) ) ; +#766 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( 29.14591031196507800, -30.74593530980999000, 27.82617728531792900 ) ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( 23.70873314123568700, -99.99999999999998600, 21.63052364494857800 ) ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( 3.346416491161121600, -14.32401828221370900, -20.05759993858539000 ) ) ; +#770 = ADVANCED_FACE ( 'NONE', ( #7331, #398 ), #3630, .F. ) ; +#771 = CARTESIAN_POINT ( 'NONE', ( 39.54089222038373900, -11.83643111846506100, 8.145953237424752300 ) ) ; +#772 = FACE_OUTER_BOUND ( 'NONE', #1515, .T. ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( 36.08566745935600300, -30.77735894433262900, 22.40983709871990800 ) ) ; +#774 = CARTESIAN_POINT ( 'NONE', ( 3.466458260355898000, -28.90349687449121400, 21.75133282177875300 ) ) ; +#775 = CARTESIAN_POINT ( 'NONE', ( 6.624150107193320200, -100.0000000000000300, -31.96792739358975800 ) ) ; +#776 = CARTESIAN_POINT ( 'NONE', ( 34.90369523061623600, -22.72218603889749700, 9.157228217708725600 ) ) ; +#777 = CARTESIAN_POINT ( 'NONE', ( 32.69226728356286300, -30.93842883924035900, 26.16661614677851200 ) ) ; +#778 = ORIENTED_EDGE ( 'NONE', *, *, #5080, .F. ) ; +#779 = CARTESIAN_POINT ( 'NONE', ( 30.10197488666475600, -12.07229092345711900, -25.07103632393197800 ) ) ; +#780 = CARTESIAN_POINT ( 'NONE', ( 5.387021232081567100, -9.728939934392983000, 24.99999999999999600 ) ) ; +#781 = CARTESIAN_POINT ( 'NONE', ( 12.69823720398885500, -20.89741751412977800, -23.44510825978145600 ) ) ; +#782 = AXIS2_PLACEMENT_3D ( 'NONE', #10897, #1993, #10948 ) ; +#783 = CARTESIAN_POINT ( 'NONE', ( 13.29279691331374900, -11.68860824032028800, 24.70225280738489500 ) ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -10.06772555652650200, -24.99999999999999600 ) ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -95.07596123493894400, 15.95758058754439400 ) ) ; +#786 = FACE_BOUND ( 'NONE', #5640, .T. ) ; +#787 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1605, #8282, #2703 ), + ( #10530, #3812, #11655 ), + ( #4914, #12757, #6049 ), + ( #13859, #7175, #558 ), + ( #8332, #1651, #9446 ), + ( #2746, #10585, #3862 ), + ( #11701, #4966, #12806 ), + ( #6094, #13902, #7226 ), + ( #599, #8378, #1698 ), + ( #9500, #2793, #10634 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.02283920811399647500, 0.02482316812118196300, 0.02680712812836745200, 0.02879108813555294000, 0.03077504814273842800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7307095185408971600, 1.000000000000000000), + ( 1.000000000000000000, 0.7539691641357880700, 1.000000000000000000), + ( 1.000000000000000000, 0.7762801466640766300, 1.000000000000000000), + ( 1.000000000000000000, 0.8188606081552497500, 1.000000000000000000), + ( 1.000000000000000000, 0.8391325614710316600, 1.000000000000000000), + ( 1.000000000000000000, 0.8772246788124065100, 1.000000000000000000), + ( 1.000000000000000000, 0.8949609257027973900, 1.000000000000000000), + ( 1.000000000000000000, 0.9268637014047117500, 1.000000000000000000), + ( 1.000000000000000000, 0.9411131024123643400, 1.000000000000000000), + ( 1.000000000000000000, 0.9534250536596455800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#788 = CARTESIAN_POINT ( 'NONE', ( 22.76711113942886300, -19.18566169464441600, 23.41732644083576200 ) ) ; +#789 = CARTESIAN_POINT ( 'NONE', ( 16.01794471716650700, -24.22440170601311100, 19.90410721021324700 ) ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -91.19670008258954400, -2.862972244136623400 ) ) ; +#791 = CARTESIAN_POINT ( 'NONE', ( 16.52588349782476800, -19.00051484900024700, 23.41296639185414500 ) ) ; +#792 = CARTESIAN_POINT ( 'NONE', ( 10.23986533752472800, -30.77646223095657500, 27.61726868705491400 ) ) ; +#793 = CARTESIAN_POINT ( 'NONE', ( 35.01422076779486800, -31.05213575078999000, 23.91455150888283000 ) ) ; +#794 = CARTESIAN_POINT ( 'NONE', ( 15.91396652202162300, -12.50000000000001200, 9.556466270749060900 ) ) ; +#795 = ORIENTED_EDGE ( 'NONE', *, *, #10962, .F. ) ; +#796 = CARTESIAN_POINT ( 'NONE', ( 39.98583107952736500, 5.611715810591142000, 20.39445895443064000 ) ) ; +#797 = CIRCLE ( 'NONE', #9684, 2.500000000000000000 ) ; +#798 = EDGE_CURVE ( 'NONE', #14018, #14226, #277, .T. ) ; +#799 = CARTESIAN_POINT ( 'NONE', ( 2.499457115958031700, -20.40235880653641200, 7.955750175412381600 ) ) ; +#800 = CARTESIAN_POINT ( 'NONE', ( 29.14019471913562100, -11.87757270080968100, 23.94867649224412500 ) ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( 6.478619962802306500, -30.86844096199532900, 25.64812668337310300 ) ) ; +#802 = CARTESIAN_POINT ( 'NONE', ( 36.81703783925929200, -10.00000000000000400, 21.38193292634323600 ) ) ; +#803 = FACE_OUTER_BOUND ( 'NONE', #11738, .T. ) ; +#804 = DIRECTION ( 'NONE', ( -0.7175207942197037200, -0.6859551209195855500, -0.1209523953732307000 ) ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( 28.16730879351690900, -31.29892962639879200, 28.02067483814851600 ) ) ; +#806 = CARTESIAN_POINT ( 'NONE', ( 39.81432695723141500, -10.74269217107431600, 10.88505121712238700 ) ) ; +#807 = CARTESIAN_POINT ( 'NONE', ( 6.229878115881614800, -22.05245299257840600, -21.95787239820755200 ) ) ; +#808 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5457, #6544, #14386, #7729 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001330694774643880200 ), + .UNSPECIFIED. ) ; +#809 = CARTESIAN_POINT ( 'NONE', ( 7.225492171928298300, -10.00000000000000500, 24.77094521223016700 ) ) ; +#810 = FACE_OUTER_BOUND ( 'NONE', #3077, .T. ) ; +#811 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -6.938893903907229400E-016 ) ) ; +#812 = ORIENTED_EDGE ( 'NONE', *, *, #7704, .T. ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( 30.65791435310254100, -30.40062862893168100, 27.30212125658078300 ) ) ; +#814 = LINE ( 'NONE', #11772, #9883 ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( 4.314028458213963200, -22.42834753501441400, 14.84964367996622600 ) ) ; +#816 = CARTESIAN_POINT ( 'NONE', ( 8.338032963083080100, -30.55516118197843800, 26.85727548530843800 ) ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( 36.04503180953545200, -28.99142004505678100, 22.80657181931595200 ) ) ; +#818 = CARTESIAN_POINT ( 'NONE', ( 2.500000000001899800, -91.58528500546607600, -1.725079236354096300 ) ) ; +#819 = CARTESIAN_POINT ( 'NONE', ( 4.423733538468074000, -30.39650425034343000, 24.23796818443979400 ) ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( 2.882357690229782500, -29.76299867617951400, 18.89891774502985900 ) ) ; +#821 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000700, -89.20772034660431900, 11.03354182248334000 ) ) ; +#822 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, -9.878887755046971400, 20.09899844734913200 ) ) ; +#823 = CARTESIAN_POINT ( 'NONE', ( 10.38017668703311700, -10.25460760048709800, -24.99999999999999300 ) ) ; +#824 = LINE ( 'NONE', #1618, #474 ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( 29.14465659879237700, -30.80772139768744800, 27.81671834152737300 ) ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( 37.40272645300496600, -21.39633089810258000, -13.77386418969234700 ) ) ; +#827 = CARTESIAN_POINT ( 'NONE', ( 24.00324979293088400, -27.99874350308863700, 27.44664516839152300 ) ) ; +#828 = CARTESIAN_POINT ( 'NONE', ( 15.67651462047581200, -99.99999999999998600, 21.63057173623877100 ) ) ; +#829 = ORIENTED_EDGE ( 'NONE', *, *, #11443, .T. ) ; +#830 = CARTESIAN_POINT ( 'NONE', ( 35.26801409067255100, -31.00873291698860600, 23.60535997260960900 ) ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( 3.019309213610791100, -30.32115962884316900, 21.56958046336221500 ) ) ; +#832 = CARTESIAN_POINT ( 'NONE', ( 10.83977579956017400, -20.28809933266904900, -22.36440432773532200 ) ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( 32.48222533647646800, -30.02579804255923400, 26.40050271193926400 ) ) ; +#834 = VERTEX_POINT ( 'NONE', #8148 ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( 9.510480543468498000, -8.559457340230590500, 25.00000000000000000 ) ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( 12.45599068559445400, -12.50000000000028200, -21.87925568307730400 ) ) ; +#838 = CARTESIAN_POINT ( 'NONE', ( 2.689277438082120500, -95.07596123493893000, -2.472754691319602100 ) ) ; +#839 = CARTESIAN_POINT ( 'NONE', ( 14.33689110635417100, -16.31057814024092800, 23.82989715529744500 ) ) ; +#840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( 12.96224195609191000, -95.07596123493893000, 9.319683354841659600 ) ) ; +#842 = ORIENTED_EDGE ( 'NONE', *, *, #13709, .T. ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( -0.02509389299197690000, -9.900298339751056900, 9.228224891069835700 ) ) ; +#844 = CARTESIAN_POINT ( 'NONE', ( 26.37675003751881800, -14.46566888762966800, -25.78741791179943700 ) ) ; +#845 = CARTESIAN_POINT ( 'NONE', ( 8.387133088945939000, -15.49616678943065800, -25.96912249545000500 ) ) ; +#846 = CARTESIAN_POINT ( 'NONE', ( 10.24082991166399400, -30.61556876570642400, 27.63775020769867300 ) ) ; +#847 = CARTESIAN_POINT ( 'NONE', ( 35.23465399510722300, -29.90510996272409400, 24.59643551502530200 ) ) ; +#848 = ORIENTED_EDGE ( 'NONE', *, *, #3663, .F. ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( 14.35532302563428300, -25.71508218979920100, 21.89516158891367300 ) ) ; +#850 = CARTESIAN_POINT ( 'NONE', ( 17.29353853274923800, -20.76369389859905500, -24.39663730798849200 ) ) ; +#851 = CARTESIAN_POINT ( 'NONE', ( 9.627546803317717000, -28.22268083571656700, 25.84846242060607900 ) ) ; +#852 = ADVANCED_FACE ( 'NONE', ( #262 ), #1480, .T. ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( 2.500875103810033200, -21.21748283492403400, 7.955181215783662600 ) ) ; +#854 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57596123371020300, 12.92977595461169600 ) ) ; +#855 = CARTESIAN_POINT ( 'NONE', ( 6.478612934041144000, -30.00409745876492100, 25.80054495622323100 ) ) ; +#856 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#857 = VECTOR ( 'NONE', #4997, 1000.000000000000000 ) ; +#858 = CARTESIAN_POINT ( 'NONE', ( 31.48210085596363300, -11.87830413028251700, 22.71895988216281700 ) ) ; +#859 = CARTESIAN_POINT ( 'NONE', ( 24.23731198295095600, -32.08003161131647100, 21.03753419048358000 ) ) ; +#860 = CARTESIAN_POINT ( 'NONE', ( 3.550532363144278700, -28.87042587368937800, 21.75716330057233300 ) ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, 20.00000000000000400 ) ) ; +#862 = AXIS2_PLACEMENT_3D ( 'NONE', #5695, #13514, #13239 ) ; +#863 = CARTESIAN_POINT ( 'NONE', ( 9.747771634043388600, -20.36979012860009800, -24.64707244313061500 ) ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( 12.57247279600838200, -10.00000000000000200, 25.05627607775190000 ) ) ; +#865 = ORIENTED_EDGE ( 'NONE', *, *, #12873, .T. ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( 30.67152742861220100, -30.72291391756587200, 27.27763147730836800 ) ) ; +#867 = CARTESIAN_POINT ( 'NONE', ( 2.503808057916397700, -27.43147359582541600, 9.040386619197583700 ) ) ; +#868 = CARTESIAN_POINT ( 'NONE', ( 8.469389766504624700, -31.08742266763850300, 26.74019128457010600 ) ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( 36.90794121850958500, -29.78513675297175600, 22.71090107634026400 ) ) ; +#870 = CARTESIAN_POINT ( 'NONE', ( 4.739753532768029100, -29.35080210797411100, 24.14299765191180900 ) ) ; +#871 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#872 = PLANE ( 'NONE', #5049 ) ; +#873 = CARTESIAN_POINT ( 'NONE', ( 36.23446646135524700, -18.64151451169201600, -18.66777260386255600 ) ) ; +#874 = CARTESIAN_POINT ( 'NONE', ( 27.41640404629845000, -11.87724389807648600, 24.55522993379390300 ) ) ; +#875 = CARTESIAN_POINT ( 'NONE', ( 4.780000885119427800, -97.40634803306925000, 18.97250827317808600 ) ) ; +#876 = VERTEX_POINT ( 'NONE', #11527 ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( 34.33520670465910000, -31.13181491983454000, 24.62606752232762000 ) ) ; +#878 = CARTESIAN_POINT ( 'NONE', ( 3.019234514074521600, -29.12343724908765500, 21.78077891814582400 ) ) ; +#879 = CARTESIAN_POINT ( 'NONE', ( 15.84199828593764900, -100.0000000000000300, -38.28538062099281800 ) ) ; +#880 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#881 = CARTESIAN_POINT ( 'NONE', ( 32.53899976766940900, -30.68268698821888300, 26.38293141964959100 ) ) ; +#882 = CARTESIAN_POINT ( 'NONE', ( 0.07766535776525709800, -10.31066143106097000, 11.21954093330454700 ) ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( 16.32626394786583600, -12.49999999999998600, -14.24802017446378800 ) ) ; +#884 = CARTESIAN_POINT ( 'NONE', ( 7.538600751188360100, -89.42430879162766600, 7.195777944474920100 ) ) ; +#885 = CARTESIAN_POINT ( 'NONE', ( 15.02797751000247800, -93.17110499671088100, 22.75064472591418500 ) ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( 22.56123947819357100, -19.88642061956926800, 23.25675730213750800 ) ) ; +#887 = CYLINDRICAL_SURFACE ( 'NONE', #2275, 1.200000000000003100 ) ; +#888 = CARTESIAN_POINT ( 'NONE', ( 11.68370255020664800, -10.02134234577609500, -25.00376323139194300 ) ) ; +#889 = CARTESIAN_POINT ( 'NONE', ( 10.44476168263807900, -30.82145604595860900, 27.67974062866754200 ) ) ; +#890 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3045, #1939, #4153 ), + ( #11994, #5262, #13104 ), + ( #6398, #14204, #7533 ), + ( #886, #8679, #1984 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 6.179952383167375300E-017, 0.001281629658370896300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9985249960690034700, 1.000000000000000000), + ( 1.000000000000000000, 0.9994383965773154800, 1.000000000000000000), + ( 1.000000000000000000, 0.9999349696809415300, 1.000000000000000000), + ( 1.000000000000000000, 0.9999940049635585000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#891 = CARTESIAN_POINT ( 'NONE', ( 35.02346654938364200, -30.90534993177904300, 24.21546065356599400 ) ) ; +#892 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -95.07596123493894400, 11.50239124669685100 ) ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 13.47808794644047800, -20.85544650011480500, -23.74445894085998500 ) ) ; +#894 = CARTESIAN_POINT ( 'NONE', ( 2.199767765007681200, -18.79709385149940100, 8.081297651469498100 ) ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( 6.732129374627156400, -31.12051735014647100, 25.61721287504145600 ) ) ; +#896 = CARTESIAN_POINT ( 'NONE', ( 11.75237789936814700, -18.19166328771218800, -26.44441125450367700 ) ) ; +#897 = CIRCLE ( 'NONE', #1425, 9.999999999999998200 ) ; +#898 = CARTESIAN_POINT ( 'NONE', ( 27.42753105269797200, -10.00000000000000200, 25.05627493123189400 ) ) ; +#899 = AXIS2_PLACEMENT_3D ( 'NONE', #3843, #11686, #4950 ) ; +#900 = CARTESIAN_POINT ( 'NONE', ( 27.56951062889584100, -38.97427732929153200, 18.99721454164350800 ) ) ; +#901 = CARTESIAN_POINT ( 'NONE', ( 3.797176894883405000, -28.95445569638178900, 22.49814043371684100 ) ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( 9.212216545470898400, -99.99999999999995700, 3.438986161326963700 ) ) ; +#903 = CIRCLE ( 'NONE', #2294, 7.500000000000000900 ) ; +#904 = CARTESIAN_POINT ( 'NONE', ( 12.21184508164312600, -18.45350095870203700, -26.36095976130335600 ) ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -7.500000000000000000, 20.00000000000000000 ) ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( 30.65787669303508900, -31.00980436263643000, 27.19462031090305800 ) ) ; +#907 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -20.28809933267076800, -24.31406949255853400 ) ) ; +#908 = CARTESIAN_POINT ( 'NONE', ( 8.435554646063836900, -30.68001643894044200, 26.88452249630384100 ) ) ; +#909 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1940, #8626, #3046, #10891 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001311701492662634200 ), + .UNSPECIFIED. ) ; +#910 = CARTESIAN_POINT ( 'NONE', ( 36.07220769414386300, -30.78225662331093200, 22.49187171194756700 ) ) ; +#911 = LINE ( 'NONE', #3090, #560 ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( 23.16781252366954300, -12.50000000000000900, -14.47908580119642100 ) ) ; +#913 = CARTESIAN_POINT ( 'NONE', ( 4.769441801822445400, -30.79159699199551900, 24.16255997086189600 ) ) ; +#914 = CARTESIAN_POINT ( 'NONE', ( 34.66811972394123100, -94.93082562414144800, 14.64358080653862400 ) ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( 33.63349436613857100, -20.28705084039689800, -21.80418851833338700 ) ) ; +#916 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000900, 14.31000000000000900 ) ) ; +#917 = ADVANCED_FACE ( 'NONE', ( #413 ), #443, .T. ) ; +#918 = CARTESIAN_POINT ( 'NONE', ( 26.69896829415430200, -31.05989899415867200, 28.39355201408329100 ) ) ; +#919 = AXIS2_PLACEMENT_3D ( 'NONE', #1033, #8818, #2118 ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( 32.59345627415582700, -31.15382711513982600, 26.06881848375318000 ) ) ; +#921 = CARTESIAN_POINT ( 'NONE', ( 3.488321359896489100, -30.54737289057775500, 21.59200998444479700 ) ) ; +#922 = DIRECTION ( 'NONE', ( 1.387778780781445500E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -94.54406934440207500, 19.57758955819930000 ) ) ; +#924 = CARTESIAN_POINT ( 'NONE', ( 32.09433997275897400, -30.01891577804089200, 26.59893184637759200 ) ) ; +#925 = CARTESIAN_POINT ( 'NONE', ( 3.261385157176064800, -21.62751316574361800, -16.63503257021509200 ) ) ; +#926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#927 = CARTESIAN_POINT ( 'NONE', ( 10.86550670388349200, -21.02940787993637500, -22.50386987034201500 ) ) ; +#928 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -3.189999999999994200 ) ) ; +#929 = FACE_OUTER_BOUND ( 'NONE', #3496, .T. ) ; +#930 = AXIS2_PLACEMENT_3D ( 'NONE', #5315, #12040, #13153 ) ; +#931 = DIRECTION ( 'NONE', ( 0.9655914505927132300, 0.0000000000000000000, 0.2600637432289626400 ) ) ; +#932 = CARTESIAN_POINT ( 'NONE', ( 9.236026828574161100, -97.48391278514982600, 20.79952273398778900 ) ) ; +#933 = EDGE_LOOP ( 'NONE', ( #14042, #14199, #14324, #14361, #1197, #8867, #11485, #1885, #2904, #9209 ) ) ; +#934 = CARTESIAN_POINT ( 'NONE', ( 4.950529183621805300, -30.96653092007794000, 14.56942902031203400 ) ) ; +#935 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#936 = CARTESIAN_POINT ( 'NONE', ( 34.60857639161740500, -10.03110590672460800, 22.84468762589185400 ) ) ; +#937 = CARTESIAN_POINT ( 'NONE', ( 10.44443081878164700, -30.68777194024017900, 27.70086158565672500 ) ) ; +#938 = CARTESIAN_POINT ( 'NONE', ( 34.72974243538102000, -29.54589728952171200, 24.74976392547536400 ) ) ; +#939 = AXIS2_PLACEMENT_3D ( 'NONE', #1863, #7759, #6613 ) ; +#940 = CARTESIAN_POINT ( 'NONE', ( 6.108012067269986500, -21.78530253108422000, -17.10330553095622000 ) ) ; +#941 = DIRECTION ( 'NONE', ( -0.8646995353985705800, -0.005415397997236929900, 0.5022602780889882100 ) ) ; +#942 = FACE_OUTER_BOUND ( 'NONE', #430, .T. ) ; +#943 = CARTESIAN_POINT ( 'NONE', ( 2.401824666538347100, -19.58307234992033600, 8.320087680423391400 ) ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( 6.609739532837138200, -30.34589443816679500, 25.93734812517715600 ) ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( 11.99800144345673800, -20.64753248289518000, -25.98804808909267200 ) ) ; +#946 = CARTESIAN_POINT ( 'NONE', ( 35.56236235036797000, -7.503621424143667600, 24.99999999999999600 ) ) ; +#947 = CARTESIAN_POINT ( 'NONE', ( 33.08452473895064100, -32.06305842516870500, 25.36675889730142300 ) ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( 4.611007348736151800, -29.14464631869562800, 23.77743874451362100 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, -99.99999999999998600, -6.100827442047402000 ) ) ; +#950 = VERTEX_POINT ( 'NONE', #5917 ) ; +#951 = CARTESIAN_POINT ( 'NONE', ( 16.65133836574144500, -22.46300696896877400, -27.20638842548343900 ) ) ; +#952 = CARTESIAN_POINT ( 'NONE', ( 30.36931415861180000, -30.68066203994985800, 27.40656316247754300 ) ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 24.15181345144133800, -20.28809933267076800, -24.23008878779836900 ) ) ; +#954 = CARTESIAN_POINT ( 'NONE', ( 8.467752825338793700, -30.18437411637661300, 26.90293701109060700 ) ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( 36.35243386433271700, -29.51206773903229000, 23.20727118083973300 ) ) ; +#956 = ORIENTED_EDGE ( 'NONE', *, *, #11355, .F. ) ; +#957 = CARTESIAN_POINT ( 'NONE', ( 4.651458086768608200, -29.79962336119223200, 24.44705090281861400 ) ) ; +#958 = CARTESIAN_POINT ( 'NONE', ( 27.08852257376300100, -95.07596123493894400, 15.95758058754438700 ) ) ; +#959 = VERTEX_POINT ( 'NONE', #11330 ) ; +#960 = VECTOR ( 'NONE', #8408, 1000.000000000000000 ) ; +#961 = CARTESIAN_POINT ( 'NONE', ( 30.38620545504618800, -22.28400686121690200, -24.90084910292698700 ) ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( 37.39833328847906600, -29.44208863240672600, 21.65675544038652900 ) ) ; +#963 = CARTESIAN_POINT ( 'NONE', ( 20.79621515491079400, -33.90005107093652700, 20.78577615588308800 ) ) ; +#964 = CARTESIAN_POINT ( 'NONE', ( 31.22500618082798600, -31.06192537258887000, 26.90811039195255500 ) ) ; +#965 = CARTESIAN_POINT ( 'NONE', ( 2.576434433531507900, -29.50957433665342900, 21.77618033517269000 ) ) ; +#966 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561061035400, 6.640286328760892900, 20.69000000000000100 ) ) ; +#967 = ORIENTED_EDGE ( 'NONE', *, *, #9825, .F. ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( 32.15420287459432600, -30.56924469703992700, 26.61463621232991300 ) ) ; +#969 = CARTESIAN_POINT ( 'NONE', ( 11.21094352685285000, -22.35262169141007100, -25.78379823873576600 ) ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999991100, -97.04517183358916600, 16.23828164244107300 ) ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( 11.24160364294935700, -12.50000000000001100, -21.26373436080227500 ) ) ; +#972 = ORIENTED_EDGE ( 'NONE', *, *, #6909, .T. ) ; +#973 = VECTOR ( 'NONE', #2447, 1000.000000000000000 ) ; +#974 = CARTESIAN_POINT ( 'NONE', ( 17.64039537637269500, -27.96255689439434300, 27.45771657700779400 ) ) ; +#975 = CARTESIAN_POINT ( 'NONE', ( 7.323134476481598700, -94.72950869662160800, 16.42489741236298100 ) ) ; +#976 = CARTESIAN_POINT ( 'NONE', ( 38.74910957300912900, -10.42465360766695200, -17.87614535881177600 ) ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( 37.79875358003290800, -18.80494426525800100, -11.53020102829466800 ) ) ; +#978 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 20.69000000000000100 ) ) ; +#979 = CARTESIAN_POINT ( 'NONE', ( 10.75175364994664000, -30.85765799013602600, 27.77374670149666300 ) ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( 34.91023098148119900, -30.58718754241688100, 24.75662836978036600 ) ) ; +#981 = CARTESIAN_POINT ( 'NONE', ( 39.96147503065170500, 7.709566240879362400, -20.63077328774388500 ) ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( 33.93508702390056400, -30.54572675117628600, 25.52842567025279100 ) ) ; +#983 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141211300, -30.55092223628113500, 21.46123905850134900 ) ) ; +#984 = LINE ( 'NONE', #10008, #3879 ) ; +#985 = EDGE_CURVE ( 'NONE', #4036, #8436, #3499, .T. ) ; +#986 = DIRECTION ( 'NONE', ( 0.01909900421572659200, -0.9998175973836266300, 0.0000000000000000000 ) ) ; +#987 = ADVANCED_FACE ( 'NONE', ( #248 ), #4074, .F. ) ; +#988 = EDGE_LOOP ( 'NONE', ( #5124, #4124, #4676, #12779 ) ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( 2.521900623207427500, -20.36279297412716700, 8.810868685808818800 ) ) ; +#990 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -3.189999999999994200 ) ) ; +#991 = CIRCLE ( 'NONE', #8254, 3.189999999999994200 ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( 6.836172580234162400, -31.16911092288271600, 25.64853424726808800 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( 17.16475167957117200, -21.80168021777511800, -27.08095464008701800 ) ) ; +#994 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( 31.82545278421820000, -31.36362213525044100, 18.01299502309913700 ) ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( 6.252297619451934600, -29.56256046075571900, 25.45122628343574100 ) ) ; +#997 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 51.02052347080197600, 20.52816548656995400 ) ) ; +#998 = ORIENTED_EDGE ( 'NONE', *, *, #10843, .F. ) ; +#999 = CARTESIAN_POINT ( 'NONE', ( 22.31280616483601900, -30.65917406624153000, 28.85723021296909300 ) ) ; +#1000 = CARTESIAN_POINT ( 'NONE', ( 37.60201440653214900, -19.59263355532167600, 7.775499463677236100 ) ) ; +#1001 = CARTESIAN_POINT ( 'NONE', ( 30.36374773626034700, -30.94048094638648600, 27.34593044041286100 ) ) ; +#1002 = CARTESIAN_POINT ( 'NONE', ( 28.80103478435169300, -100.0000000000000300, -36.66518970606522000 ) ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( 8.637466881291688400, -30.82851831105540100, 26.94120673203505200 ) ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( 36.14805431062797700, -30.64526189207031900, 22.96252550195114500 ) ) ; +#1005 = ORIENTED_EDGE ( 'NONE', *, *, #10094, .T. ) ; +#1006 = CARTESIAN_POINT ( 'NONE', ( 5.095268727908367300, -31.05312670865304600, 24.07259668191845800 ) ) ; +#1007 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#1008 = ORIENTED_EDGE ( 'NONE', *, *, #2909, .T. ) ; +#1009 = CARTESIAN_POINT ( 'NONE', ( 27.31557433599876100, -18.44924856617058100, -26.52937834632716000 ) ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( 36.64071364797249000, -30.47338590205669100, 21.47491005283948000 ) ) ; +#1011 = CARTESIAN_POINT ( 'NONE', ( 29.14807152136020800, -30.86377510431065800, 27.81066332731067400 ) ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( 3.603915575612079100, -30.60837917911077000, 21.70041860615500800 ) ) ; +#1013 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12883, #10608, #7294, #671, #8448, #1764, #9570, #2865 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 6.254634441385501500E-018, 0.0005146930796039638200, 0.001029386159207921300, 0.002058772318415834900 ), + .UNSPECIFIED. ) ; +#1014 = CIRCLE ( 'NONE', #6022, 1.200000000000007500 ) ; +#1015 = ORIENTED_EDGE ( 'NONE', *, *, #10515, .T. ) ; +#1016 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997900, -94.68648130466903000, 20.44522513542782600 ) ) ; +#1017 = CARTESIAN_POINT ( 'NONE', ( 32.09450201272503000, -31.12673977025382800, 26.40390440357407800 ) ) ; +#1018 = CARTESIAN_POINT ( 'NONE', ( 29.31914157940161700, -10.57233724645647900, -25.03628875526501900 ) ) ; +#1019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#1020 = CARTESIAN_POINT ( 'NONE', ( 16.02958907340117600, -12.50000000000001200, -14.05851453109948900 ) ) ; +#1021 = EDGE_LOOP ( 'NONE', ( #7715, #4902, #2157, #10528, #7867 ) ) ; +#1022 = AXIS2_PLACEMENT_3D ( 'NONE', #10313, #11455, #8067 ) ; +#1023 = DIRECTION ( 'NONE', ( -0.01900744305038486200, -0.9998193422357293200, 0.0000000000000000000 ) ) ; +#1024 = LINE ( 'NONE', #13936, #674 ) ; +#1025 = CARTESIAN_POINT ( 'NONE', ( 3.447028985637162100, -93.11097320101100600, 18.95414348968907700 ) ) ; +#1026 = DIRECTION ( 'NONE', ( -0.9997497390652422300, -0.02203108137216862700, -0.003884674060096822800 ) ) ; +#1027 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1028 = CARTESIAN_POINT ( 'NONE', ( 10.75243196597115000, -30.77521478108397800, 27.78932852363611200 ) ) ; +#1029 = CARTESIAN_POINT ( 'NONE', ( 34.46301696873169400, -29.37684640316582800, 24.81266275829839100 ) ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( 22.66693591733050200, -12.50000000000002000, 10.13746891555981700 ) ) ; +#1031 = AXIS2_PLACEMENT_3D ( 'NONE', #3139, #10989, #4255 ) ; +#1032 = CARTESIAN_POINT ( 'NONE', ( 33.66720294334826500, -29.58411976075191400, 25.51653521393943100 ) ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999996400, -7.520606794341293100, 22.49999999999999300 ) ) ; +#1034 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.50000000000001400, 10.14164662228682600 ) ) ; +#1035 = ORIENTED_EDGE ( 'NONE', *, *, #9211, .F. ) ; +#1036 = CARTESIAN_POINT ( 'NONE', ( 2.620235393353664400, -21.06557345806642800, 9.805860447701901400 ) ) ; +#1037 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002800, -7.502374582597432200, 20.43868351343800800 ) ) ; +#1038 = CARTESIAN_POINT ( 'NONE', ( 6.697777349282485900, -30.54271266944778800, 25.96909396867167200 ) ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( 34.73609302804975100, -35.53526422174174100, 14.09039230291181100 ) ) ; +#1040 = CARTESIAN_POINT ( 'NONE', ( 8.708360714074393300, -30.23559958198555400, 27.01911615944725800 ) ) ; +#1041 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1042 = AXIS2_PLACEMENT_3D ( 'NONE', #7587, #941, #8727 ) ; +#1043 = CARTESIAN_POINT ( 'NONE', ( 37.80199703170022500, -18.79481377902363400, 7.891586610597490100 ) ) ; +#1044 = CARTESIAN_POINT ( 'NONE', ( 30.16470075385976900, -30.60296714933735600, 27.49205469643696300 ) ) ; +#1045 = CARTESIAN_POINT ( 'NONE', ( 33.14431205699790400, -20.28809933267076800, -18.27044903443782400 ) ) ; +#1046 = CARTESIAN_POINT ( 'NONE', ( 8.644893451126032200, -30.37778188365267300, 27.00429768585711400 ) ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( 35.84525015209348500, -29.18762830464734400, 23.38376437085430500 ) ) ; +#1048 = CARTESIAN_POINT ( 'NONE', ( 4.706170778097486200, -30.15070829842826000, 24.60820299523816200 ) ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -95.07596123493894400, 15.95758058754439400 ) ) ; +#1050 = CARTESIAN_POINT ( 'NONE', ( 23.33128525005569600, -20.43419133417484800, -26.84829666638158600 ) ) ; +#1051 = ADVANCED_FACE ( 'NONE', ( #110 ), #13533, .F. ) ; +#1052 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 3, ( + ( #11748, #8424, #9550, #2838 ), + ( #10676, #3957, #11794, #5065 ), + ( #12904, #6197, #14000, #7322 ), + ( #695, #8475, #1792, #9598 ), + ( #2892, #10729, #4003, #11841 ), + ( #5116, #12953, #6244, #14053 ), + ( #7377, #744, #8526, #1847 ), + ( #9653, #2946, #10789, #4058 ), + ( #11895, #5171, #13011, #6299 ), + ( #14107, #7438, #799, #8583 ), + ( #1898, #9712, #3003, #10845 ), + ( #4112, #11952, #5223, #13063 ), + ( #6355, #14163, #7491, #853 ), + ( #8633, #1948, #9764, #3055 ), + ( #10899, #4164, #12002, #5272 ), + ( #13114, #6408, #14212, #7542 ), + ( #894, #8688, #1995, #9809 ), + ( #3106, #10951, #4216, #12048 ), + ( #5324, #13162, #6454, #14255 ), + ( #7589, #943, #8729, #2042 ), + ( #9854, #3148, #10997, #4266 ), + ( #12094, #5367, #13208, #6498 ), + ( #14297, #7635, #989, #8777 ), + ( #2081, #9906, #3191, #11033 ), + ( #4309, #12142, #5407, #13250 ), + ( #6541, #14343, #7681, #1036 ), + ( #8822, #2122, #9942, #3233 ), + ( #11076, #4352, #12185, #5454 ), + ( #13291, #6586, #14384, #7726 ), + ( #1078, #8868, #2168, #9987 ), + ( #3273, #11120, #4392, #12225 ), + ( #5497, #13336, #6630, #36 ), + ( #7776, #1124, #8912, #2216 ), + ( #10032, #3320, #11168, #4442 ), + ( #12269, #5545, #13376, #6681 ), + ( #84, #7821, #1175, #8959 ), + ( #2259, #10087, #3368, #11214 ), + ( #4484, #12319, #5593, #13423 ), + ( #6730, #133, #7868, #1218 ), + ( #9009, #2306, #10132, #3418 ), + ( #11260, #4531, #12361, #5644 ), + ( #13465, #6775, #177, #7916 ), + ( #1257, #9051, #2352, #10179 ), + ( #3461, #11310, #4576, #12408 ), + ( #5691, #13510, #6818, #216 ), + ( #7965, #1300, #9097, #2397 ), + ( #10224, #3505, #11350, #4624 ), + ( #12453, #5739, #13551, #6868 ), + ( #257, #8011, #1353, #9144 ), + ( #2438, #10269, #3557, #11398 ), + ( #4667, #12508, #5792, #13601 ), + ( #6915, #309, #8060, #1398 ), + ( #9196, #2491, #10307, #3605 ), + ( #11449, #4710, #12548, #5843 ), + ( #13649, #6962, #354, #8111 ), + ( #1442, #9240, #2540, #10356 ), + ( #3647, #11493, #4760, #12595 ), + ( #5887, #13702, #7014, #400 ), + ( #8163, #1498, #9288, #2588 ), + ( #10409, #3698, #11543, #4807 ), + ( #12642, #5934, #13744, #7066 ), + ( #446, #8215, #1544, #9337 ), + ( #2632, #10459, #3748, #11589 ), + ( #4852, #12692, #5986, #13791 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 4 ), + ( 4, 4 ), + ( -0.0002931893853132806500, -0.0001381103390282211200, -6.057081588569134900E-005, -2.180105431442646100E-005, -2.416173528794017500E-006, 1.696870725683842600E-005, 0.0003271267998269575000, 0.0009474429849671956400, 0.002188075355247671800, 0.004669340095808624200, 0.007150604836369576500, 0.009631869576930528900, 0.01459439905805243400, 0.01707566379861338500, 0.01955692853917433800, 0.02451945802029624500, 0.02700072276085719500, 0.02948198750141814800, 0.03196325224197910100, 0.03444451698254005100, 0.03692578172310100000, 0.03940704646366195700 ), + ( -0.006679916914071645800, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#1053 = CARTESIAN_POINT ( 'NONE', ( 22.55794980690657100, -33.35025653084942100, 26.50741664928542100 ) ) ; +#1054 = CARTESIAN_POINT ( 'NONE', ( 2.552601895597642400, -29.87053735661179100, 21.82267599308824300 ) ) ; +#1055 = CYLINDRICAL_SURFACE ( 'NONE', #4856, 3.189999999999995100 ) ; +#1056 = CARTESIAN_POINT ( 'NONE', ( 24.90837253545722500, -16.74465669003047800, 23.81073504993179700 ) ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( 31.95182063408597600, -30.43609245824101700, 26.72512140132033300 ) ) ; +#1058 = FACE_OUTER_BOUND ( 'NONE', #10974, .T. ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( 39.99910947301803800, -10.00000000000000000, -20.10966279070171600 ) ) ; +#1060 = CARTESIAN_POINT ( 'NONE', ( 29.14591328781746100, -30.86419965416380200, 27.80531988043870200 ) ) ; +#1061 = ORIENTED_EDGE ( 'NONE', *, *, #6204, .F. ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( 25.92517128242723600, -9.904267923131007100, 25.49953701147115500 ) ) ; +#1063 = CARTESIAN_POINT ( 'NONE', ( 5.416258314072603500, -22.94687661006048500, 10.77034002390250600 ) ) ; +#1064 = CARTESIAN_POINT ( 'NONE', ( 8.827103670881202300, -21.25144667422514600, -20.92136280160143600 ) ) ; +#1065 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3479, #9072, #4594, #12424 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -2.828427177521135000E-005, 0.008970207114740048200 ), + .UNSPECIFIED. ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( -2.710505431213761100E-017, -10.00000000000000000, -19.74219049453680000 ) ) ; +#1067 = EDGE_CURVE ( 'NONE', #4366, #13608, #11166, .T. ) ; +#1068 = FACE_OUTER_BOUND ( 'NONE', #11322, .T. ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141211300, -30.55092223628113500, 21.46123905850134900 ) ) ; +#1070 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000542900, -20.00224778756832900, -11.65104318591477500 ) ) ; +#1071 = CARTESIAN_POINT ( 'NONE', ( 10.85395755279100200, -30.86407919301280600, 27.80528123978583500 ) ) ; +#1072 = CARTESIAN_POINT ( 'NONE', ( 34.77866717142896400, -30.34886635198865400, 24.98987513182097300 ) ) ; +#1073 = ORIENTED_EDGE ( 'NONE', *, *, #12553, .F. ) ; +#1074 = CARTESIAN_POINT ( 'NONE', ( 24.80196346761400900, -24.20662439429262500, 19.77767562541820800 ) ) ; +#1075 = CARTESIAN_POINT ( 'NONE', ( 33.84874315727952900, -30.34861689460138500, 25.63317798862232200 ) ) ; +#1076 = CARTESIAN_POINT ( 'NONE', ( 35.63655629803894700, -9.891006360247272900, 24.98401397549083600 ) ) ; +#1077 = PLANE ( 'NONE', #494 ) ; +#1078 = CARTESIAN_POINT ( 'NONE', ( 2.723722157569270100, -18.89042504826036500, 11.89864976826521000 ) ) ; +#1079 = CARTESIAN_POINT ( 'NONE', ( 6.829598611213381100, -29.74335080616453900, 25.90992011529738500 ) ) ; +#1080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( 37.39131319606428900, -28.86880190224944400, 15.22480331321634300 ) ) ; +#1082 = CARTESIAN_POINT ( 'NONE', ( 9.945105075296067900, -30.54638639090890000, 27.53392675221577700 ) ) ; +#1083 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -1.972066022637282400, 11.18414218126905400 ) ) ; +#1084 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -8.821897668817309000, 13.81061424392288700 ) ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 37.49932402367557700, -21.21919536069982500, 7.935169267559835800 ) ) ; +#1086 = VERTEX_POINT ( 'NONE', #5743 ) ; +#1087 = CARTESIAN_POINT ( 'NONE', ( 30.16601884437513100, -30.83167179595525900, 27.45592070976873000 ) ) ; +#1088 = CARTESIAN_POINT ( 'NONE', ( 34.68345617790463100, -100.0000000000000300, -28.51501817793796400 ) ) ; +#1089 = CARTESIAN_POINT ( 'NONE', ( 8.749930794895883300, -31.00112905727914400, 26.92608240665719400 ) ) ; +#1090 = CARTESIAN_POINT ( 'NONE', ( 36.30415332494396800, -30.27300893472258600, 23.35274883431705800 ) ) ; +#1091 = ORIENTED_EDGE ( 'NONE', *, *, #4340, .F. ) ; +#1092 = DIRECTION ( 'NONE', ( -0.9701425001453314300, -0.2425356250363351600, -0.0000000000000000000 ) ) ; +#1093 = CARTESIAN_POINT ( 'NONE', ( 5.112028647366392100, -29.26658102875111600, 24.37117057917456400 ) ) ; +#1094 = CARTESIAN_POINT ( 'NONE', ( 8.581914286094473700, -95.07596123493894400, 14.41445870334524800 ) ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( 13.62324996247971300, -14.46566888762681600, -25.78741791179893600 ) ) ; +#1096 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1097 = VERTEX_POINT ( 'NONE', #3583 ) ; +#1098 = AXIS2_PLACEMENT_3D ( 'NONE', #8016, #1358, #9148 ) ; +#1099 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#1100 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1101 = CARTESIAN_POINT ( 'NONE', ( 3.572564710098032700, -28.91036354976213800, 21.99932463758434100 ) ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( 31.92675134095714600, -31.00471198628242000, 26.57508510269893900 ) ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, -19.48143887112369700 ) ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( 28.93943055991428900, -30.81021663825432100, 27.87990429138987000 ) ) ; +#1105 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3336, #1140, #12285, #5563 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.443815854918977500E-005, 0.004905794974461258000 ), + .UNSPECIFIED. ) ; +#1106 = ORIENTED_EDGE ( 'NONE', *, *, #7398, .T. ) ; +#1107 = CARTESIAN_POINT ( 'NONE', ( 40.02509389299198300, -9.900298339751053300, 9.228224891069812600 ) ) ; +#1108 = CARTESIAN_POINT ( 'NONE', ( 13.45158485016257400, -24.14679069301731200, 19.34782123803455500 ) ) ; +#1109 = CARTESIAN_POINT ( 'NONE', ( 8.762441052913359800, -12.50000000000086700, -19.40123957594103400 ) ) ; +#1110 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, 15.71686712626636900 ) ) ; +#1111 = CARTESIAN_POINT ( 'NONE', ( -3.209927722384578300E-015, -20.76351822333075200, -24.39789867012037000 ) ) ; +#1112 = CARTESIAN_POINT ( 'NONE', ( 4.172409935381910600, -30.87117908263093500, 22.85004166014005700 ) ) ; +#1113 = ORIENTED_EDGE ( 'NONE', *, *, #9807, .F. ) ; +#1114 = CARTESIAN_POINT ( 'NONE', ( 37.49754482299686500, -27.40876213439642200, 8.308253179799397300 ) ) ; +#1115 = CARTESIAN_POINT ( 'NONE', ( 0.01424793291119201900, -10.05699213505975800, -11.68354572550320300 ) ) ; +#1116 = CARTESIAN_POINT ( 'NONE', ( 34.46229289443422100, -31.12101262510295300, 24.50430449425783800 ) ) ; +#1117 = EDGE_LOOP ( 'NONE', ( #1646, #9652 ) ) ; +#1118 = AXIS2_PLACEMENT_3D ( 'NONE', #1404, #9201, #2496 ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( 27.04201226159270300, -12.50000000000029700, 21.21030342268996800 ) ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( 33.67562712390748900, -31.14741779436111800, 25.25265255248372400 ) ) ; +#1121 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000200, -12.50000000000000500, -12.14018736362615200 ) ) ; +#1122 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#1123 = ADVANCED_FACE ( 'NONE', ( #123 ), #12655, .F. ) ; +#1124 = CARTESIAN_POINT ( 'NONE', ( 3.338121331336883800, -19.53427936655199200, 13.31503365693225000 ) ) ; +#1125 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -95.07596123493894400, 17.53844207640286600 ) ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 6.907343227871670000, -30.77595916973435700, 26.00901162222342900 ) ) ; +#1127 = CARTESIAN_POINT ( 'NONE', ( 0.6935707441268006400, -10.53368772316730600, -16.03479577055032500 ) ) ; +#1128 = ORIENTED_EDGE ( 'NONE', *, *, #4148, .F. ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 37.01821241427434500, -29.13501009258929000, 10.34245753971858900 ) ) ; +#1130 = CARTESIAN_POINT ( 'NONE', ( 27.54747226146161800, -10.00000000000000000, 25.00000000000000000 ) ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( 11.70347653118195200, -11.87738400283647900, 24.28556698280983300 ) ) ; +#1132 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.706925649115387200, 19.37952903979339000 ) ) ; +#1133 = CARTESIAN_POINT ( 'NONE', ( 37.50051282403762100, -20.40194015291888600, 7.965431293666052100 ) ) ; +#1134 = ORIENTED_EDGE ( 'NONE', *, *, #2165, .T. ) ; +#1135 = CARTESIAN_POINT ( 'NONE', ( 29.75902651264316000, -30.61929512100509500, 27.63761324889513900 ) ) ; +#1136 = VECTOR ( 'NONE', #1684, 1000.000000000000000 ) ; +#1137 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 17.50000000000000400 ) ) ; +#1138 = CARTESIAN_POINT ( 'NONE', ( 8.732485953891831800, -30.58241044108171600, 27.03875625637362000 ) ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( 35.51846031678817900, -29.11554607223592600, 23.61073956171723200 ) ) ; +#1140 = CARTESIAN_POINT ( 'NONE', ( 19.19799675244221900, -19.84147976941898500, 23.26468158655498200 ) ) ; +#1141 = ADVANCED_FACE ( 'NONE', ( #97 ), #890, .T. ) ; +#1142 = ORIENTED_EDGE ( 'NONE', *, *, #12328, .F. ) ; +#1143 = CARTESIAN_POINT ( 'NONE', ( 32.54542615243479300, -20.77777100159673700, 19.18910313105848100 ) ) ; +#1144 = CARTESIAN_POINT ( 'NONE', ( 5.051239550107641000, -30.44436227936813900, 24.82016705179241700 ) ) ; +#1145 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #13587, #6902, #296 ), + ( #8046, #1385, #9182 ), + ( #2476, #10296, #3592 ), + ( #11433, #4698, #12538 ), + ( #5828, #13637, #6951 ), + ( #342, #8098, #1430 ), + ( #9227, #2525, #10343 ), + ( #3634, #11483, #4747 ), + ( #12583, #5873, #13689 ), + ( #7000, #390, #8151 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001841940554938276800, 0.003683881109876553600, 0.005525821664814830100, 0.007367762219753107100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9049646166428769700, 1.000000000000000000), + ( 1.000000000000000000, 0.8965144736755746900, 1.000000000000000000), + ( 1.000000000000000000, 0.8885896255718644900, 1.000000000000000000), + ( 1.000000000000000000, 0.8734030101730970700, 1.000000000000000000), + ( 1.000000000000000000, 0.8660921494935763800, 1.000000000000000000), + ( 1.000000000000000000, 0.8522837295804698300, 1.000000000000000000), + ( 1.000000000000000000, 0.8457556059464114200, 1.000000000000000000), + ( 1.000000000000000000, 0.8332529881160996000, 1.000000000000000000), + ( 1.000000000000000000, 0.8272809932556285400, 1.000000000000000000), + ( 1.000000000000000000, 0.8215198476744742800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1146 = CARTESIAN_POINT ( 'NONE', ( 2.312155430128012500, -9.999999999999998200, -23.48876245695845100 ) ) ; +#1147 = CYLINDRICAL_SURFACE ( 'NONE', #11829, 10.00000000000000200 ) ; +#1148 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -95.07596123493894400, 16.93034213569669800 ) ) ; +#1149 = CARTESIAN_POINT ( 'NONE', ( 8.734524406670058000, -32.38346429597572000, 24.73734694259692900 ) ) ; +#1150 = EDGE_LOOP ( 'NONE', ( #13844, #3121, #3445, #8950, #12210, #5313, #8099, #8943 ) ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( 37.91699878727141000, -11.91161885709901600, -18.88546603688147100 ) ) ; +#1152 = CARTESIAN_POINT ( 'NONE', ( 2.878501937977752300, -30.24177118649238900, 21.81247105078597700 ) ) ; +#1153 = CIRCLE ( 'NONE', #8685, 3.189999999999994200 ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( 31.69505176318830700, -19.25292242696956200, -24.02734102282404300 ) ) ; +#1155 = CARTESIAN_POINT ( 'NONE', ( 31.63934973604040500, -30.25685735074875600, 26.86321069414961800 ) ) ; +#1156 = CARTESIAN_POINT ( 'NONE', ( 0.4572951574445213200, -11.10684395490247500, 11.50390627968639900 ) ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( 28.94000061549356300, -30.84078776854856600, 27.87422009338244400 ) ) ; +#1158 = CARTESIAN_POINT ( 'NONE', ( 36.52435214623969300, -28.91143769734443600, 21.81814968539435300 ) ) ; +#1159 = CARTESIAN_POINT ( 'NONE', ( 37.45541189464489000, -10.00000000000000400, 17.31364324773969400 ) ) ; +#1160 = CARTESIAN_POINT ( 'NONE', ( 2.162359074263622300, -11.92449110551127600, -19.04418663574372100 ) ) ; +#1161 = CARTESIAN_POINT ( 'NONE', ( 15.43506530183639700, -12.49999999999999300, -13.42581229424002000 ) ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.734663387489531400, 14.07959167098222300 ) ) ; +#1163 = CARTESIAN_POINT ( 'NONE', ( 3.447463137046364400, -29.92997386021387000, 23.17288774081984600 ) ) ; +#1164 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2828, #5109, #7368, #737 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.002439696165264778700, 0.003430282641860692800 ), + .UNSPECIFIED. ) ; +#1165 = FACE_OUTER_BOUND ( 'NONE', #6051, .T. ) ; +#1166 = ORIENTED_EDGE ( 'NONE', *, *, #4520, .T. ) ; +#1167 = CARTESIAN_POINT ( 'NONE', ( 2.523223231219828800, -9.902274021631496800, 17.32653986527565600 ) ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( 1.741133487254376000, -11.87142026197906700, -18.15156729897876900 ) ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( 34.39084806228646600, -30.16259387457838100, 25.26966662981124000 ) ) ; +#1170 = ORIENTED_EDGE ( 'NONE', *, *, #5992, .T. ) ; +#1171 = CARTESIAN_POINT ( 'NONE', ( 23.43106905446211700, -12.50000000000001800, 9.956272712236673400 ) ) ; +#1172 = CARTESIAN_POINT ( 'NONE', ( 33.63615592468568100, -30.11389075699129200, 25.75582809360672700 ) ) ; +#1173 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#1174 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( + ( #13146, #14369, #7711, #1062, #8852, #2149, #9971, #3259, #11106, #4380, #12211, #5483, #13321, #6615, #22, #7762, #1107, #8897 ), + ( #2200, #10015, #3303, #11154, #4427, #12258, #5530, #13363, #6664, #70, #7808, #1159, #8944, #2244, #10069, #3543, #11385, #4654 ), + ( #12494, #5779, #13588, #6903, #297, #8047, #1386, #9183, #2477, #10297, #3593, #11434, #4699, #12539, #5829, #13638, #6952, #343 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 2, 1, 2 ), + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -0.01000000000000000000, 0.0000000000000000000, 1.000000000000000000 ), + ( -0.07853981633974482800, 0.1276272015520853500, 0.3337942194439155200, 0.5399612373357456400, 0.7461282552275758700, 0.9522952731194059800, 1.158462291011236100, 1.364629308903066300, 1.570796326794896600 ), + .UNSPECIFIED. ) ; +#1175 = CARTESIAN_POINT ( 'NONE', ( 4.455524847817087200, -20.04872603737153700, 15.58415384778587400 ) ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( 12.00121923797575700, -95.07596123493895800, 16.22270505209867200 ) ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( 36.80128450780934900, -31.76844042080018200, 10.54607940770229700 ) ) ; +#1178 = CARTESIAN_POINT ( 'NONE', ( 6.940344448287980600, -30.03977952129930200, 26.08735891159041400 ) ) ; +#1179 = LINE ( 'NONE', #10619, #857 ) ; +#1180 = VERTEX_POINT ( 'NONE', #10890 ) ; +#1181 = AXIS2_PLACEMENT_3D ( 'NONE', #11422, #2416, #12531 ) ; +#1182 = CARTESIAN_POINT ( 'NONE', ( 16.13915471908710900, -31.26646881308077400, 28.75014776385882000 ) ) ; +#1183 = CARTESIAN_POINT ( 'NONE', ( 32.46386659179886200, -100.0000000000000100, -33.37087759187892300 ) ) ; +#1184 = CARTESIAN_POINT ( 'NONE', ( 16.70080456545278800, -19.42405117426248000, 23.33257940964701800 ) ) ; +#1185 = CARTESIAN_POINT ( 'NONE', ( 37.60217152711881300, -19.58616419667746900, 7.995103869114762700 ) ) ; +#1186 = ORIENTED_EDGE ( 'NONE', *, *, #6243, .T. ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( 29.75989316913110000, -30.78267393149363000, 27.61629630241797200 ) ) ; +#1188 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -1.981438871123700300 ) ) ; +#1189 = CARTESIAN_POINT ( 'NONE', ( 8.950840895690744100, -31.04597211861778000, 27.00107649714489400 ) ) ; +#1190 = CARTESIAN_POINT ( 'NONE', ( 36.07781950891988000, -30.04106098235653000, 23.77036536444205700 ) ) ; +#1191 = CYLINDRICAL_SURFACE ( 'NONE', #9658, 2.500000000000002200 ) ; +#1192 = CARTESIAN_POINT ( 'NONE', ( 37.43590397938042000, -26.09290632542685600, 8.383960475289191200 ) ) ; +#1193 = CARTESIAN_POINT ( 'NONE', ( 5.348061969342418300, -29.40255661752831500, 24.69082067184943000 ) ) ; +#1194 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1195 = CARTESIAN_POINT ( 'NONE', ( 33.12648794929066300, -95.07596123493895800, 14.13131049753625100 ) ) ; +#1196 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, 25.00000000000000000 ) ) ; +#1197 = ORIENTED_EDGE ( 'NONE', *, *, #12553, .T. ) ; +#1198 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 8.200000000000013500, 17.50000000000000400 ) ) ; +#1199 = CARTESIAN_POINT ( 'NONE', ( 3.185192758346698600, -29.09619797243577500, 22.01606134139509100 ) ) ; +#1200 = CARTESIAN_POINT ( 'NONE', ( 26.69034777193338900, -97.50821382426271100, 21.75299072418017600 ) ) ; +#1201 = CARTESIAN_POINT ( 'NONE', ( 31.65835898265473200, -30.78786481661379400, 26.80973638174486200 ) ) ; +#1202 = CARTESIAN_POINT ( 'NONE', ( 33.06378749050610100, -10.53840924592833300, -25.00000000000000000 ) ) ; +#1203 = CARTESIAN_POINT ( 'NONE', ( 28.83692901827962300, -30.81211278498123500, 27.91039948565772700 ) ) ; +#1204 = CARTESIAN_POINT ( 'NONE', ( 37.43254970111715400, -29.94472185190569400, 21.63656283266131600 ) ) ; +#1205 = CARTESIAN_POINT ( 'NONE', ( 6.103060774561138900, -21.78869175521446200, -17.07747253767685100 ) ) ; +#1206 = CARTESIAN_POINT ( 'NONE', ( 5.401189313162910300, -22.93589974969712100, 10.69315970999229700 ) ) ; +#1207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1208 = CARTESIAN_POINT ( 'NONE', ( 4.173865472719509000, -29.04370194053121800, 23.17237134546948600 ) ) ; +#1209 = EDGE_LOOP ( 'NONE', ( #9004, #5968, #13678, #4546 ) ) ; +#1210 = CARTESIAN_POINT ( 'NONE', ( -9.375905047643163600E-005, -9.999999999999998200, 9.226532922263601200 ) ) ; +#1211 = ADVANCED_FACE ( 'NONE', ( #58 ), #11263, .F. ) ; +#1212 = CARTESIAN_POINT ( 'NONE', ( 30.95992372105041200, -12.50000000000056800, -19.66111327295220000 ) ) ; +#1213 = CARTESIAN_POINT ( 'NONE', ( 7.572309133701249800, -37.34576757614819800, 16.37701796840341800 ) ) ; +#1214 = CARTESIAN_POINT ( 'NONE', ( 34.21549090524106200, -31.03062351782351400, 24.90493339021610100 ) ) ; +#1215 = CARTESIAN_POINT ( 'NONE', ( 28.15158517744542300, -24.04793322523886800, 18.64781827441308300 ) ) ; +#1216 = CARTESIAN_POINT ( 'NONE', ( 33.59255409373795900, -30.92303859007017400, 25.55054813542892600 ) ) ; +#1217 = DATE_TIME_ROLE ( 'classification_date' ) ; +#1218 = CARTESIAN_POINT ( 'NONE', ( 5.612473258681969700, -20.45078838368138500, 17.22884500529741600 ) ) ; +#1219 = CARTESIAN_POINT ( 'NONE', ( 22.48440633327290400, -25.57199632883141000, 22.25470525456795900 ) ) ; +#1220 = CARTESIAN_POINT ( 'NONE', ( 30.74547260897431400, -38.13051021660400200, 17.57871096529550300 ) ) ; +#1221 = CARTESIAN_POINT ( 'NONE', ( 7.064322574816225500, -31.05842170619494500, 25.91615420780760800 ) ) ; +#1222 = CARTESIAN_POINT ( 'NONE', ( 33.37584989280667000, -100.0000000000000100, 0.2290708660672470500 ) ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( 3.820566815431441800, -94.17021602992545600, 6.064793430330234400 ) ) ; +#1224 = CARTESIAN_POINT ( 'NONE', ( 10.68722931371559600, -32.64776786519419700, 27.45153395764533900 ) ) ; +#1225 = CARTESIAN_POINT ( 'NONE', ( 9.784861605238738500, -12.66549609558534700, -25.08649169343631900 ) ) ; +#1226 = ORIENTED_EDGE ( 'NONE', *, *, #8199, .F. ) ; +#1227 = CARTESIAN_POINT ( 'NONE', ( 37.79899451109560700, -18.79869278655983300, 8.146234762415575800 ) ) ; +#1228 = CARTESIAN_POINT ( 'NONE', ( 29.75896620942082600, -30.92273720553381700, 27.58369889584808400 ) ) ; +#1229 = CARTESIAN_POINT ( 'NONE', ( 2.526735565964159900, -27.83121797770521200, 11.77490938526868400 ) ) ; +#1230 = CARTESIAN_POINT ( 'NONE', ( 8.929776423611425400, -30.69659536025353600, 27.11079195311482700 ) ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( 35.51970271918794000, -30.95347196973961300, 23.28725952603061300 ) ) ; +#1232 = AXIS2_PLACEMENT_3D ( 'NONE', #6174, #13982, #7301 ) ; +#1233 = CARTESIAN_POINT ( 'NONE', ( 4.215859155414015900, -10.00000000000000000, -24.95404270507161500 ) ) ; +#1234 = CARTESIAN_POINT ( 'NONE', ( 5.346163659759591600, -30.79754955113468600, 24.77603479177154000 ) ) ; +#1235 = ORIENTED_EDGE ( 'NONE', *, *, #5038, .T. ) ; +#1236 = CARTESIAN_POINT ( 'NONE', ( 3.485655132928112500, -30.57898538928324000, 21.92344003508616300 ) ) ; +#1237 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#1238 = CARTESIAN_POINT ( 'NONE', ( 31.53046331514962500, -30.17321033981011900, 26.90191225438293200 ) ) ; +#1239 = CARTESIAN_POINT ( 'NONE', ( 17.68719255689186200, -30.86501923738228100, 26.28236762573406800 ) ) ; +#1240 = CARTESIAN_POINT ( 'NONE', ( 28.83681269644657200, -30.82716334946435300, 27.90777954620727300 ) ) ; +#1241 = CARTESIAN_POINT ( 'NONE', ( 36.42649047267661200, -28.88518164719404900, 21.88527296827424000 ) ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( 6.533157879027883500, -12.49999999999998200, -16.50690749907355200 ) ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( 5.048411703364140000, -12.49999999999997000, 11.42730967673365000 ) ) ; +#1244 = CARTESIAN_POINT ( 'NONE', ( 3.823118437475587800, -12.11607859501373600, -21.47744057744870000 ) ) ; +#1245 = ORIENTED_EDGE ( 'NONE', *, *, #4418, .T. ) ; +#1246 = CARTESIAN_POINT ( 'NONE', ( 3.695772504963242200, -30.27314874051343500, 23.35316822510040100 ) ) ; +#1247 = EDGE_CURVE ( 'NONE', #6439, #4588, #83, .T. ) ; +#1248 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #874, #8659, #9784, #3079, #10924, #4188, #12022, #5297, #13137, #6427, #14232, #7565 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 3.469446951953613800E-018, 0.002093136952171008100, 0.004186273904342012600, 0.006279410856513022900, 0.007325979332598531000, 0.008372547808684039200 ), + .UNSPECIFIED. ) ; +#1249 = CARTESIAN_POINT ( 'NONE', ( 14.07971483923061700, -10.00000000000000000, 25.47533241661070500 ) ) ; +#1250 = VERTEX_POINT ( 'NONE', #14247 ) ; +#1251 = CARTESIAN_POINT ( 'NONE', ( 24.08603347797913600, -12.49999999999998400, -13.96464078845992400 ) ) ; +#1252 = CARTESIAN_POINT ( 'NONE', ( 2.862695482381023100, -30.52213682570920000, 9.507176850547074000 ) ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( 34.11185466664211700, -29.80359914771290500, 25.34457037018618300 ) ) ; +#1254 = CARTESIAN_POINT ( 'NONE', ( 29.28094277290643200, -12.49999999999995400, 20.06887249989625500 ) ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( 33.46156704683017600, -29.78444199364655600, 25.75243345093975100 ) ) ; +#1256 = EDGE_LOOP ( 'NONE', ( #14336, #6502, #5807, #13001, #9427, #4611 ) ) ; +#1257 = CARTESIAN_POINT ( 'NONE', ( 6.776792758196390500, -19.06756898916785300, 18.93942186327535300 ) ) ; +#1258 = CARTESIAN_POINT ( 'NONE', ( 22.49272530894468100, -27.99000931841081700, 27.51040726472854600 ) ) ; +#1259 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999998600, -22.44689168857715300, -12.35761149326397200 ) ) ; +#1260 = CARTESIAN_POINT ( 'NONE', ( 6.983692367301352500, -30.36855829249414600, 26.16527014243967000 ) ) ; +#1261 = CARTESIAN_POINT ( 'NONE', ( 24.15800171406233300, -100.0000000000000100, 6.546524093470333500 ) ) ; +#1262 = CARTESIAN_POINT ( 'NONE', ( 6.030236220137927800, -31.62501897086361100, 23.28317980270540800 ) ) ; +#1263 = CARTESIAN_POINT ( 'NONE', ( 11.46707577438217600, -10.21099504244834000, -25.03447263759167600 ) ) ; +#1264 = EDGE_LOOP ( 'NONE', ( #7189, #3714 ) ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( 37.48217131789268600, -21.16951403678027100, 8.541517108712197300 ) ) ; +#1266 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#1267 = CARTESIAN_POINT ( 'NONE', ( 8.950782895983165200, -30.30057168614699500, 27.13264681890067800 ) ) ; +#1268 = CARTESIAN_POINT ( 'NONE', ( 35.90106565554976500, -29.74853990721612400, 23.88331443083001200 ) ) ; +#1269 = EDGE_LOOP ( 'NONE', ( #9508, #9696, #9728 ) ) ; +#1270 = CARTESIAN_POINT ( 'NONE', ( 29.10698979413244200, -28.94107132397718700, 28.18149539518388700 ) ) ; +#1271 = ADVANCED_FACE ( 'NONE', ( #45 ), #4398, .F. ) ; +#1272 = CARTESIAN_POINT ( 'NONE', ( 23.70632232476214100, -18.97676302269650300, 23.41715447965678700 ) ) ; +#1273 = CARTESIAN_POINT ( 'NONE', ( 5.346135603545637800, -29.77243010239599700, 24.95678436621952700 ) ) ; +#1274 = ORIENTED_EDGE ( 'NONE', *, *, #5553, .F. ) ; +#1275 = CARTESIAN_POINT ( 'NONE', ( 15.36721859908754700, -12.50000000000002000, 8.909464078250323400 ) ) ; +#1276 = CARTESIAN_POINT ( 'NONE', ( 0.4722207971997611200, -11.88888318879897100, 8.005331014635874700 ) ) ; +#1277 = CARTESIAN_POINT ( 'NONE', ( 37.13785458394583100, -30.60274723833105500, 23.42221899303206100 ) ) ; +#1278 = CARTESIAN_POINT ( 'NONE', ( 2.728829535348772600, -29.51024227488274200, 22.09293722439333200 ) ) ; +#1279 = DIRECTION ( 'NONE', ( -0.8646911947423466800, 0.005406040221160496100, -0.5022747380310702600 ) ) ; +#1280 = ORIENTED_EDGE ( 'NONE', *, *, #7296, .F. ) ; +#1281 = CARTESIAN_POINT ( 'NONE', ( 31.56426714319784900, -30.66118166156897800, 26.88844247614857300 ) ) ; +#1282 = DIRECTION ( 'NONE', ( 0.02364944212992628800, -0.9997203128310154800, 0.0000000000000000000 ) ) ; +#1283 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650500, -30.82655086342984100, 27.93782961424065500 ) ) ; +#1284 = CARTESIAN_POINT ( 'NONE', ( 37.47575051974926900, -29.61575485557810700, 21.75796701775232800 ) ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( 28.11704205596117100, -20.15317812581854500, 22.10856859344965700 ) ) ; +#1286 = CARTESIAN_POINT ( 'NONE', ( 15.15549911964495400, -12.50000000000000200, 8.460067880939499600 ) ) ; +#1287 = ORIENTED_EDGE ( 'NONE', *, *, #8772, .T. ) ; +#1288 = LINE ( 'NONE', #12789, #1303 ) ; +#1289 = CARTESIAN_POINT ( 'NONE', ( 4.154539670532728700, -29.18752272040191900, 23.38258496309785900 ) ) ; +#1290 = CARTESIAN_POINT ( 'NONE', ( 8.074959370700399900, -19.66096426143593600, 19.96040237347082100 ) ) ; +#1291 = CARTESIAN_POINT ( 'NONE', ( 29.92548398706459500, -21.10437146907192100, -21.97009161890973100 ) ) ; +#1292 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1293 = CARTESIAN_POINT ( 'NONE', ( 34.17254619429586200, -30.71654128201382200, 25.26040968325035900 ) ) ; +#1294 = AXIS2_PLACEMENT_3D ( 'NONE', #8428, #12910, #5070 ) ; +#1295 = CARTESIAN_POINT ( 'NONE', ( 23.76343752393631100, -12.50000000000002700, 9.788516331648716900 ) ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( 33.56885837211623200, -30.60845331874146400, 25.76370461796164700 ) ) ; +#1297 = LINE ( 'NONE', #13888, #1136 ) ; +#1298 = EDGE_LOOP ( 'NONE', ( #7161, #812, #4505, #12622 ) ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( 10.85519853156572800, -30.80281180500033100, 27.81751601131726300 ) ) ; +#1300 = CARTESIAN_POINT ( 'NONE', ( 9.171439262153329600, -19.46160437169398300, 20.79135924204183200 ) ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.23116646380275400, -11.74895849411027100 ) ) ; +#1302 = CARTESIAN_POINT ( 'NONE', ( 34.45187205218863400, -12.49999999999992500, -14.29705773609261000 ) ) ; +#1303 = VECTOR ( 'NONE', #9431, 1000.000000000000000 ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( 7.360845521058162300, -31.15551600312408100, 26.03935118122154400 ) ) ; +#1305 = CARTESIAN_POINT ( 'NONE', ( 3.274637221503227100, -11.88235381997398200, 17.54337022235138500 ) ) ; +#1306 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #44, #6637, #8918, #2220, #10039, #3326, #11178, #4452, #12277, #5552, #13384, #6689, #89, #7828, #1183, #8966, #2266, #10093, #3377, #11221, #4491, #12327, #5603, #13430, #6737 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000006900, 0.1875000000000009200, 0.2500000000000011700, 0.3750000000000012800, 0.4375000000000011700, 0.5000000000000010000, 0.6250000000000014400, 0.6875000000000016700, 0.7500000000000014400, 0.8125000000000012200, 0.8750000000000008900, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( 37.43956585706639100, -20.33925606815700200, 9.316713937203170200 ) ) ; +#1308 = CARTESIAN_POINT ( 'NONE', ( 15.54658916408450300, -17.63482393658835400, 23.65377454702070600 ) ) ; +#1309 = CARTESIAN_POINT ( 'NONE', ( 9.031095404240655700, -30.80275920170265300, 27.13105013522590200 ) ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( 35.62481172673683700, -30.81649811409936700, 23.51380127846672300 ) ) ; +#1311 = TOROIDAL_SURFACE ( 'NONE', #55, 2.500000000000000000, 2.500000000000000000 ) ; +#1312 = ORIENTED_EDGE ( 'NONE', *, *, #10195, .F. ) ; +#1313 = CARTESIAN_POINT ( 'NONE', ( 32.78626936898633200, -28.37793501425462800, 24.59866868181231000 ) ) ; +#1314 = VECTOR ( 'NONE', #1765, 1000.000000000000100 ) ; +#1315 = CARTESIAN_POINT ( 'NONE', ( 24.28910645002773400, -17.92969083025765500, 23.60178155794912800 ) ) ; +#1316 = CARTESIAN_POINT ( 'NONE', ( 5.819021000320921300, -31.09479319270098000, 24.85043942047099800 ) ) ; +#1317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1318 = EDGE_LOOP ( 'NONE', ( #7024, #3530, #2510, #6274 ) ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( 7.153502132361495600, -23.47229019674167100, 14.53724077920211700 ) ) ; +#1320 = CARTESIAN_POINT ( 'NONE', ( 0.4080036601353817000, -11.63201464054145600, 8.723077636360862600 ) ) ; +#1321 = CARTESIAN_POINT ( 'NONE', ( 32.89906155490955100, -31.95704532770028500, 23.90669425850060700 ) ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( 3.717133832571700000, -30.68407487972525200, 22.01647704703247400 ) ) ; +#1323 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9846, #6446, #4256, #12086, #5360, #13200 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0007678199183018769100, 0.002057736042019404600, 0.003347652165736932400 ), + .UNSPECIFIED. ) ; +#1324 = FACE_OUTER_BOUND ( 'NONE', #10019, .T. ) ; +#1325 = CARTESIAN_POINT ( 'NONE', ( 17.61220524717462900, -25.56940302422834300, 22.25469417330467800 ) ) ; +#1326 = ORIENTED_EDGE ( 'NONE', *, *, #8240, .T. ) ; +#1327 = CARTESIAN_POINT ( 'NONE', ( 11.84657918575577900, -30.65936817455452300, 28.13757725071985400 ) ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 31.53037401731753800, -31.08679244954724700, 26.74063636293538300 ) ) ; +#1329 = CARTESIAN_POINT ( 'NONE', ( 28.53503102133274900, -9.794649201555445800, -25.00000000000000000 ) ) ; +#1330 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( 36.45785171944555700, -30.56863179463024900, 21.58849288844604400 ) ) ; +#1332 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -1.981438871123700300 ) ) ; +#1333 = CARTESIAN_POINT ( 'NONE', ( 30.33332354448200300, -27.14145319294438600, 19.78078534970623500 ) ) ; +#1334 = CARTESIAN_POINT ( 'NONE', ( 6.318497268266036700, -23.27492611854299700, 13.12266003810073500 ) ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( 4.175142095231875000, -30.87282918534610900, 22.84907284270194700 ) ) ; +#1336 = ORIENTED_EDGE ( 'NONE', *, *, #8917, .T. ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( 4.211567950362760500, -30.71080337460997700, 23.48982112478442000 ) ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( 16.23403384378141500, -12.49999999999999600, -14.20125081752089200 ) ) ; +#1339 = LINE ( 'NONE', #3547, #1685 ) ; +#1340 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, 12.00000000000000000, 0.0000000000000000000 ) ) ; +#1341 = ADVANCED_FACE ( 'NONE', ( #13664 ), #3163, .F. ) ; +#1342 = CARTESIAN_POINT ( 'NONE', ( 22.43866206969477900, -30.66176281334873400, 28.85677374700786000 ) ) ; +#1343 = ORIENTED_EDGE ( 'NONE', *, *, #7644, .F. ) ; +#1344 = AXIS2_PLACEMENT_3D ( 'NONE', #13016, #6304, #14116 ) ; +#1345 = CARTESIAN_POINT ( 'NONE', ( 28.71875170253587200, -12.50000000000004300, -21.28667980198374500 ) ) ; +#1346 = CARTESIAN_POINT ( 'NONE', ( 25.03003990485839100, -19.96530868863710900, 23.02462227818016400 ) ) ; +#1347 = CARTESIAN_POINT ( 'NONE', ( 33.75787477914327900, -29.58467030287405200, 25.45748363692711200 ) ) ; +#1348 = CARTESIAN_POINT ( 'NONE', ( 29.46122985433288500, -23.94097070462097700, 17.88482772826444000 ) ) ; +#1349 = CARTESIAN_POINT ( 'NONE', ( 33.24972006622847000, -29.69931544862695500, 25.84110740528128900 ) ) ; +#1350 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #14007, #5176 ), + ( #7445, #805 ), + ( #8590, #1904 ), + ( #9717, #3007 ), + ( #10853, #4119 ), + ( #11958, #5230 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 4 ), + ( 2, 2 ), + ( 0.8219414260611004300, 0.8750000000000003300, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#1351 = ORIENTED_EDGE ( 'NONE', *, *, #332, .T. ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( 10.85395461229212800, -30.74586783976617700, 27.82612089172549800 ) ) ; +#1353 = CARTESIAN_POINT ( 'NONE', ( 10.50237407382701500, -19.77351757896683200, 21.51771619725840500 ) ) ; +#1354 = CARTESIAN_POINT ( 'NONE', ( 2.499999918618690300, -29.71061042947956200, 21.60901691940275500 ) ) ; +#1355 = CARTESIAN_POINT ( 'NONE', ( 24.94542243938203500, -12.50000000000003900, -12.50819505493310200 ) ) ; +#1356 = CARTESIAN_POINT ( 'NONE', ( 7.262662736588652900, -30.56673505818789500, 26.30635388938749500 ) ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( 4.946757232866788800, -12.50000000000117800, 7.950411064780134000 ) ) ; +#1358 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1359 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -95.07596123493894400, 16.93034213569669800 ) ) ; +#1360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669230600, 0.9848077530122093500 ) ) ; +#1361 = CARTESIAN_POINT ( 'NONE', ( 37.33003440998377400, -19.55846120618495800, 10.85099208568348500 ) ) ; +#1362 = CARTESIAN_POINT ( 'NONE', ( 37.63399613019395000, -10.00577354972706200, 20.10430461088510200 ) ) ; +#1363 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1364 = CARTESIAN_POINT ( 'NONE', ( 9.040864663857371800, -30.40884511639487500, 27.17814966389918800 ) ) ; +#1365 = CARTESIAN_POINT ( 'NONE', ( 35.48287172589243000, -29.36385232928103400, 23.95858087599240300 ) ) ; +#1366 = ORIENTED_EDGE ( 'NONE', *, *, #13247, .F. ) ; +#1367 = CARTESIAN_POINT ( 'NONE', ( 37.20802441652518400, -31.50141451404641700, 23.18009611392352200 ) ) ; +#1368 = CARTESIAN_POINT ( 'NONE', ( 26.48335237729847000, -14.43060197383482900, 24.13631160225051900 ) ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( 5.603038599274246000, -30.20008198704345000, 25.26962967125050200 ) ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 1.689890462850188200E-005, -10.00000000000000500, 7.855827988880017500 ) ) ; +#1371 = CARTESIAN_POINT ( 'NONE', ( 6.658087536547608200, -12.50000000000011400, 15.85852041385160800 ) ) ; +#1372 = CARTESIAN_POINT ( 'NONE', ( 27.87167029948562200, -30.95112933280264000, 28.19049694220307200 ) ) ; +#1373 = CARTESIAN_POINT ( 'NONE', ( 11.97486184791453400, -10.14508343418420800, 24.97441787609948700 ) ) ; +#1374 = AXIS2_PLACEMENT_3D ( 'NONE', #8093, #4793, #12625 ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( 2.689662742648560200, -29.86710201864190500, 22.14300162531722200 ) ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( 31.36585580880781900, -30.57075154906319600, 26.99484272418946400 ) ) ; +#1377 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#1378 = CARTESIAN_POINT ( 'NONE', ( 37.14093851001183600, -29.27364607333156600, 21.92970026214740300 ) ) ; +#1379 = CARTESIAN_POINT ( 'NONE', ( 13.05846279649622800, -100.0000000000000100, 5.807110827402657300 ) ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( 35.58912883079804600, -28.86879837619238700, 23.39820157191621400 ) ) ; +#1381 = CARTESIAN_POINT ( 'NONE', ( 17.42649082925013100, -19.89845033991263900, 23.25457520830270800 ) ) ; +#1382 = CARTESIAN_POINT ( 'NONE', ( 6.007327031633144200, -31.15493130632546900, 24.95216069342544400 ) ) ; +#1383 = AXIS2_PLACEMENT_3D ( 'NONE', #6776, #178, #7917 ) ; +#1384 = CARTESIAN_POINT ( 'NONE', ( 4.057409658039787800, -29.64378459928513000, 23.76513239825934300 ) ) ; +#1385 = CARTESIAN_POINT ( 'NONE', ( 31.11684402788500100, -16.03491414002181200, -26.06411818920361200 ) ) ; +#1386 = CARTESIAN_POINT ( 'NONE', ( 29.32735840597426600, -19.61230474633204700, 21.67623321130022200 ) ) ; +#1387 = CARTESIAN_POINT ( 'NONE', ( 33.74427896105508000, -18.07985662323323300, -22.48042072781294800 ) ) ; +#1388 = CIRCLE ( 'NONE', #4940, 1.200000000000013500 ) ; +#1389 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -8.233174757015769200, 15.73800420961426700 ) ) ; +#1390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1391 = CARTESIAN_POINT ( 'NONE', ( 23.76637918596324500, -12.49999999999999800, -14.19511140994134900 ) ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( 37.29220036493094900, -10.00000000000000000, -20.74810897437791700 ) ) ; +#1393 = CARTESIAN_POINT ( 'NONE', ( 33.94057140863759500, -30.47800006717315900, 25.54759887919835700 ) ) ; +#1394 = ORIENTED_EDGE ( 'NONE', *, *, #13420, .T. ) ; +#1395 = CARTESIAN_POINT ( 'NONE', ( 30.86347970827849400, -12.49999999999795700, 18.87898875718437000 ) ) ; +#1396 = CARTESIAN_POINT ( 'NONE', ( 33.39494068907166700, -30.43966587052306500, 25.92835577591944900 ) ) ; +#1397 = CARTESIAN_POINT ( 'NONE', ( 11.06044890670051100, -30.82207986215456300, 27.87777379044025500 ) ) ; +#1398 = CARTESIAN_POINT ( 'NONE', ( 11.87418578298918200, -20.04139614814344100, 22.11758222342658800 ) ) ; +#1399 = CARTESIAN_POINT ( 'NONE', ( 5.831983776819085600, -21.87840814517258900, -16.43494219365377200 ) ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( 2.201425001453305900, -18.80570000581308300, -11.53187062879840900 ) ) ; +#1401 = CARTESIAN_POINT ( 'NONE', ( 34.54877048016540200, -22.03835568271724200, -15.28745558934948100 ) ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( 15.04752539396638000, -12.50000000000002700, 8.064548762767042700 ) ) ; +#1403 = VECTOR ( 'NONE', #4243, 1000.000000000000100 ) ; +#1404 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#1405 = CARTESIAN_POINT ( 'NONE', ( 23.31688640993270700, -12.50000000000000200, 10.00607251507366700 ) ) ; +#1406 = DIRECTION ( 'NONE', ( 0.06029729647166469400, 0.9981804626610401000, 0.0000000000000000000 ) ) ; +#1407 = CARTESIAN_POINT ( 'NONE', ( 37.12731320045168100, -18.90252148385607400, 12.39279297258094900 ) ) ; +#1408 = VERTEX_POINT ( 'NONE', #7202 ) ; +#1409 = CARTESIAN_POINT ( 'NONE', ( 38.05132902200041700, -10.00000000000000400, -19.77201413487519600 ) ) ; +#1410 = CARTESIAN_POINT ( 'NONE', ( 37.49981611007457600, -21.22235360604244300, 7.876884797643986000 ) ) ; +#1411 = CARTESIAN_POINT ( 'NONE', ( 9.237892974426673100, -30.94746482651681800, 27.17379242716849300 ) ) ; +#1412 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10675, #5063, #12903, #6195, #13999, #7321, #693, #8472, #1789, #9596, #2891, #10727, #4001, #11840, #5115, #12950, #6242, #14052, #7373, #743, #8523, #1843, #9651, #2945, #10787, #4057, #11894, #5168, #13008, #6296, #14105 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -6.000000000028369800E-008, 0.0003560213449962351200, 0.0007121026899924705400, 0.001424265379984941400, 0.002848590759969878100, 0.004272916139954814100, 0.005697241519939751400, 0.008545892279909626100, 0.009970217659894567800, 0.01139454303987950800, 0.01424319379984938600, 0.01566751917983432600, 0.01709184455981926600, 0.01994049531978914600, 0.02136482069977408200, 0.02278914607975902200 ), + .UNSPECIFIED. ) ; +#1413 = CARTESIAN_POINT ( 'NONE', ( 35.73552982043565900, -30.47812055744618600, 23.96333673270157400 ) ) ; +#1414 = ADVANCED_FACE ( 'NONE', ( #13677 ), #1645, .F. ) ; +#1415 = CARTESIAN_POINT ( 'NONE', ( 6.007327031633144200, -31.15493130632546900, 24.95216069342544400 ) ) ; +#1416 = CARTESIAN_POINT ( 'NONE', ( 23.23759800404046800, -33.16412371340100400, 28.41415409802973000 ) ) ; +#1417 = CARTESIAN_POINT ( 'NONE', ( 17.56133793030465600, -30.66176281334875100, 28.85677374700785700 ) ) ; +#1418 = ORIENTED_EDGE ( 'NONE', *, *, #7793, .T. ) ; +#1419 = CARTESIAN_POINT ( 'NONE', ( 3.715319312789206600, -28.93571379780628700, 22.32413466879864900 ) ) ; +#1420 = CARTESIAN_POINT ( 'NONE', ( 31.34678388156553900, -31.00725885619891300, 26.87573040739775400 ) ) ; +#1421 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1957, #8646, #3066, #10910, #4177, #12012, #5283, #13126, #6418, #14222 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2500000000000000000, 0.5000000000000000000, 0.7500000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#1422 = CARTESIAN_POINT ( 'NONE', ( 36.83341054767854700, -30.41526712312745000, 21.72916359703915700 ) ) ; +#1423 = CARTESIAN_POINT ( 'NONE', ( 8.050377550081448100, -22.03500000000001400, 16.02161072489651500 ) ) ; +#1424 = VERTEX_POINT ( 'NONE', #3893 ) ; +#1425 = AXIS2_PLACEMENT_3D ( 'NONE', #13557, #6875, #264 ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 34.81285015099683700, -21.71824668978013800, 16.41209550012336400 ) ) ; +#1427 = CARTESIAN_POINT ( 'NONE', ( 8.374366267148721100, -31.09490434094777100, 26.68568623277072400 ) ) ; +#1428 = CARTESIAN_POINT ( 'NONE', ( 4.525876132601287500, -30.95296603113978400, 23.38811664314502900 ) ) ; +#1429 = EDGE_CURVE ( 'NONE', #7078, #8761, #3798, .T. ) ; +#1430 = CARTESIAN_POINT ( 'NONE', ( 36.42652523363283700, -14.68914479826909800, -20.26918752882742700 ) ) ; +#1431 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -27.25937709767108100, 29.45670614745888500 ) ) ; +#1432 = VERTEX_POINT ( 'NONE', #630 ) ; +#1433 = CARTESIAN_POINT ( 'NONE', ( 11.61790697935709600, -10.20414664949418400, -25.03599656232716000 ) ) ; +#1434 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12122, #10932, #13233, #6526, #14325, #7663, #1018, #8805, #2106, #9933, #3219, #11060, #4335, #12170, #5433, #13275 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3.832129411430761500E-017, 0.0004355954975725366600, 0.0008711909951450349400, 0.001306786492717533500, 0.001742381990290031700, 0.002177977487862530100, 0.002613572985435028500, 0.003484763980580026600 ), + .UNSPECIFIED. ) ; +#1435 = CARTESIAN_POINT ( 'NONE', ( 15.24665923594115000, -12.50000000000002100, 8.692959952558725300 ) ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( 27.35723093004061100, -20.90070021043603200, -23.42157692681475800 ) ) ; +#1437 = CARTESIAN_POINT ( 'NONE', ( 34.97411103847854000, -12.23676894503167000, -22.63718909890534200 ) ) ; +#1438 = ORIENTED_EDGE ( 'NONE', *, *, #5766, .T. ) ; +#1439 = CARTESIAN_POINT ( 'NONE', ( 24.20764266763774900, -12.50000000000000200, 9.446738148215844800 ) ) ; +#1440 = CARTESIAN_POINT ( 'NONE', ( 33.25010962403381900, -31.16763623395652500, 25.58279443993989900 ) ) ; +#1441 = CARTESIAN_POINT ( 'NONE', ( 11.05988369392830600, -30.79141880856413100, 27.88288791919417500 ) ) ; +#1442 = CARTESIAN_POINT ( 'NONE', ( 13.71538700137327600, -19.17234378821917700, 22.93513719808682100 ) ) ; +#1443 = CARTESIAN_POINT ( 'NONE', ( 6.067370461581502300, -12.49999999999989500, -15.59869368867967600 ) ) ; +#1444 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( 33.94325122304789500, -12.50000000000032500, -15.57638570613424300 ) ) ; +#1446 = CARTESIAN_POINT ( 'NONE', ( 5.278023550743557600, -22.86338838446281600, 10.17101685651165100 ) ) ; +#1447 = ORIENTED_EDGE ( 'NONE', *, *, #2427, .F. ) ; +#1448 = AXIS2_PLACEMENT_3D ( 'NONE', #520, #1609, #9406 ) ; +#1449 = CARTESIAN_POINT ( 'NONE', ( 0.09712465669868176900, 10.19006527892302000, 17.85934566586512400 ) ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( 8.048567629553549100, -94.71789415299988900, 16.79999317405806600 ) ) ; +#1451 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2638, #2592, #3754 ), + ( #11594, #4858, #12697 ), + ( #5993, #13796, #7117 ), + ( #505, #8267, #1592 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01592776396892534400, 0.01608118859727798000 ), + ( 0.0000000000000000000, 0.8352961401601902700 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7598171141420762000, 0.9208819032634710800), + ( 1.000000000000000000, 0.7598301395378597200, 0.9208861939293939700), + ( 1.000000000000000000, 0.7598370140430769100, 0.9208884584444814200), + ( 1.000000000000000000, 0.7598377651636929500, 0.9208887058694108500) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1452 = CARTESIAN_POINT ( 'NONE', ( 35.97217341396291300, -20.66501976819750300, 14.66033149739288500 ) ) ; +#1453 = ORIENTED_EDGE ( 'NONE', *, *, #3309, .F. ) ; +#1454 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -19.99999999999987600, -11.53187062879839800 ) ) ; +#1455 = FACE_OUTER_BOUND ( 'NONE', #7541, .T. ) ; +#1456 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, -11.53187062879839400 ) ) ; +#1457 = CARTESIAN_POINT ( 'NONE', ( 9.230019983792393700, -30.59961497878174400, 27.25343143263470900 ) ) ; +#1458 = CARTESIAN_POINT ( 'NONE', ( 35.25516503942055400, -29.17979018062499800, 23.94950917634360400 ) ) ; +#1459 = CARTESIAN_POINT ( 'NONE', ( 37.50092117136268400, -19.99631531456497400, 7.905530317962091900 ) ) ; +#1460 = AXIS2_PLACEMENT_3D ( 'NONE', #10337, #5870, #13685 ) ; +#1461 = VERTEX_POINT ( 'NONE', #10615 ) ; +#1462 = CARTESIAN_POINT ( 'NONE', ( 12.81459439460386200, -20.01159223144724600, 22.47944544301258000 ) ) ; +#1463 = CARTESIAN_POINT ( 'NONE', ( 37.49619201152530200, -27.43147028981213600, 9.040364410876657400 ) ) ; +#1464 = CARTESIAN_POINT ( 'NONE', ( 5.781788181673705100, -30.44943817968825100, 25.36327086977278000 ) ) ; +#1465 = CARTESIAN_POINT ( 'NONE', ( 23.52652869476703000, -24.23082913827305200, 19.94957715155968400 ) ) ; +#1466 = CARTESIAN_POINT ( 'NONE', ( 3.819352345279208600, -12.11568551640326200, -21.47327155446963700 ) ) ; +#1467 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -22.50000000000001100, -11.97268808056955100 ) ) ; +#1468 = CARTESIAN_POINT ( 'NONE', ( 22.49932347176402200, -19.90706702945534800, 23.25319916115345400 ) ) ; +#1469 = ORIENTED_EDGE ( 'NONE', *, *, #703, .T. ) ; +#1470 = AXIS2_PLACEMENT_3D ( 'NONE', #12762, #6054, #13864 ) ; +#1471 = CARTESIAN_POINT ( 'NONE', ( 3.101181051412480500, -30.27289798419348800, 22.38939313697272100 ) ) ; +#1472 = FACE_OUTER_BOUND ( 'NONE', #6672, .T. ) ; +#1473 = CARTESIAN_POINT ( 'NONE', ( 31.25714702189865000, -30.39752369538644300, 27.04897313363963800 ) ) ; +#1474 = CARTESIAN_POINT ( 'NONE', ( 15.96749068653518800, -30.69526230281081100, 28.85086688317573700 ) ) ; +#1475 = CARTESIAN_POINT ( 'NONE', ( 7.307481606486994100, -30.11556309159577800, 26.31175575736557400 ) ) ; +#1476 = CARTESIAN_POINT ( 'NONE', ( 36.57168661979901000, -28.98286658758707200, 22.04119020913348200 ) ) ; +#1477 = CARTESIAN_POINT ( 'NONE', ( 5.650693702021849100, -100.0000000000000100, -2.025726487526193300 ) ) ; +#1478 = ORIENTED_EDGE ( 'NONE', *, *, #11317, .F. ) ; +#1479 = CARTESIAN_POINT ( 'NONE', ( 35.67286607824210200, -26.07468805367702900, 14.40602476364324100 ) ) ; +#1480 = PLANE ( 'NONE', #1374 ) ; +#1481 = CARTESIAN_POINT ( 'NONE', ( 10.85395141082100400, -30.86424268165969700, 27.80524411472469000 ) ) ; +#1482 = AXIS2_PLACEMENT_3D ( 'NONE', #2573, #10390, #3681 ) ; +#1483 = CARTESIAN_POINT ( 'NONE', ( 4.019227702202747400, -30.01410318782883400, 23.88649015578149100 ) ) ; +#1484 = FACE_OUTER_BOUND ( 'NONE', #10679, .T. ) ; +#1485 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.22530847815576700, 15.71017885060761000 ) ) ; +#1486 = ORIENTED_EDGE ( 'NONE', *, *, #5642, .F. ) ; +#1487 = CARTESIAN_POINT ( 'NONE', ( 10.47675115215961800, -10.19246902129148000, -24.99999999999999600 ) ) ; +#1488 = CYLINDRICAL_SURFACE ( 'NONE', #9777, 3.189999999999994200 ) ; +#1489 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998900, -12.50000000000000400, -11.97268808056939400 ) ) ; +#1490 = ADVANCED_FACE ( 'NONE', ( #13161 ), #14009, .F. ) ; +#1491 = CARTESIAN_POINT ( 'NONE', ( 26.64279795048565800, -12.49999999999991100, -22.23470977914486800 ) ) ; +#1492 = CARTESIAN_POINT ( 'NONE', ( 32.70401481225849900, -10.00000000000000200, -26.91813081093324200 ) ) ; +#1493 = ORIENTED_EDGE ( 'NONE', *, *, #12516, .T. ) ; +#1494 = CARTESIAN_POINT ( 'NONE', ( 31.42032587607057800, -23.71458304468561500, 16.26906054308788900 ) ) ; +#1495 = CARTESIAN_POINT ( 'NONE', ( 33.28522630154861200, -30.23978797285734300, 25.99728951099873000 ) ) ; +#1496 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #508, #13799, #7120, #8270, #1595, #9392, #2689, #10518, #3803, #11643, #4901, #12744, #6041, #13848, #7164, #549, #8322, #1639, #9434, #2738, #10572, #3848, #11690, #4954 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000011100, 0.1875000000000014200, 0.2500000000000017200, 0.3750000000000018300, 0.4375000000000018900, 0.5000000000000018900, 0.6250000000000015500, 0.6875000000000013300, 0.7500000000000011100, 0.8750000000000006700, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#1497 = CARTESIAN_POINT ( 'NONE', ( 11.16295946180943800, -30.83073075531818600, 27.90709033118648800 ) ) ; +#1498 = CARTESIAN_POINT ( 'NONE', ( 15.21858490546823000, -19.43886450524971500, 23.17815150668366200 ) ) ; +#1499 = CARTESIAN_POINT ( 'NONE', ( 15.09377624675023500, -12.49999999999997900, -12.67301775561996800 ) ) ; +#1500 = CARTESIAN_POINT ( 'NONE', ( 24.83001270543003300, -12.50000000000001400, -12.90752028367949400 ) ) ; +#1501 = CIRCLE ( 'NONE', #11849, 3.189999999999995100 ) ; +#1502 = ORIENTED_EDGE ( 'NONE', *, *, #6435, .F. ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( 4.204066695203221300, -28.72313302742487900, 22.40274080954656100 ) ) ; +#1504 = CARTESIAN_POINT ( 'NONE', ( 27.06250289308881900, -95.07596123493894400, 17.45546876126958600 ) ) ; +#1505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1506 = CARTESIAN_POINT ( 'NONE', ( 15.25907222685729000, -95.07596123493894400, 16.84199284340541400 ) ) ; +#1507 = AXIS2_PLACEMENT_3D ( 'NONE', #6946, #339, #5824 ) ; +#1508 = CARTESIAN_POINT ( 'NONE', ( 34.72034442681550100, -19.99048550063686100, 16.85426196912593300 ) ) ; +#1509 = ORIENTED_EDGE ( 'NONE', *, *, #12987, .F. ) ; +#1510 = CARTESIAN_POINT ( 'NONE', ( 26.44050684946240500, -20.41993413119560000, -26.33957947307413900 ) ) ; +#1511 = CARTESIAN_POINT ( 'NONE', ( 9.342108194456582000, -31.00935798431594000, 27.19474006712650300 ) ) ; +#1512 = CARTESIAN_POINT ( 'NONE', ( 35.72585668172558800, -30.20907472198368600, 24.16937480522089700 ) ) ; +#1513 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57596123493894400, 11.50239124669685300 ) ) ; +#1514 = CIRCLE ( 'NONE', #899, 2.500000000000000000 ) ; +#1515 = EDGE_LOOP ( 'NONE', ( #12109, #9670, #6796, #3352, #4215, #1418, #9859, #2112, #842, #760, #12469, #12184, #1287, #1964, #1106, #1675 ) ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( 3.120960608547559200, -20.86148999558103200, 12.27936825848206000 ) ) ; +#1517 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -89.20772034660431900, 11.03354182248334700 ) ) ; +#1518 = CARTESIAN_POINT ( 'NONE', ( 5.997292426348563400, -29.52004737847664000, 25.25345283021196300 ) ) ; +#1519 = CARTESIAN_POINT ( 'NONE', ( 31.91974058730180600, -23.64571185759795200, 15.77241667871804900 ) ) ; +#1520 = CARTESIAN_POINT ( 'NONE', ( 5.576559016980951400, -9.999999999999120700, -23.30104150351202100 ) ) ; +#1521 = CARTESIAN_POINT ( 'NONE', ( 15.10013235038419700, -97.51367397290081800, 21.97013632456544100 ) ) ; +#1522 = CARTESIAN_POINT ( 'NONE', ( 1.948670977999612800, -10.00000000000000000, -19.77201413487523100 ) ) ; +#1523 = ORIENTED_EDGE ( 'NONE', *, *, #7489, .F. ) ; +#1524 = CARTESIAN_POINT ( 'NONE', ( 3.603520982702428400, -29.09342137814539300, 22.59506388104889400 ) ) ; +#1525 = EDGE_CURVE ( 'NONE', #2710, #8803, #14209, .T. ) ; +#1526 = CARTESIAN_POINT ( 'NONE', ( 31.26392586545879800, -30.82914083232135000, 26.98797389869332300 ) ) ; +#1527 = CARTESIAN_POINT ( 'NONE', ( 7.517576974556716300, -31.05331328136988500, 26.21935813370319200 ) ) ; +#1528 = CARTESIAN_POINT ( 'NONE', ( 37.33889433474583100, -30.03626910690390900, 21.84694057901371500 ) ) ; +#1529 = LINE ( 'NONE', #11545, #2169 ) ; +#1530 = CARTESIAN_POINT ( 'NONE', ( 19.22904836792060500, -30.62972060655622300, 28.86242365258682000 ) ) ; +#1531 = CARTESIAN_POINT ( 'NONE', ( -0.1989474801075089300, -12.49207140751603300, -19.74219049453679600 ) ) ; +#1532 = CARTESIAN_POINT ( 'NONE', ( 4.546891690650158900, -29.12954582216685000, 23.69532665923913600 ) ) ; +#1533 = CARTESIAN_POINT ( 'NONE', ( 28.13510747653303700, -10.33531861314803600, 24.94087428136824900 ) ) ; +#1534 = VERTEX_POINT ( 'NONE', #3942 ) ; +#1535 = CARTESIAN_POINT ( 'NONE', ( 10.00425621369263700, -11.08828832296017500, -25.00000000000176600 ) ) ; +#1536 = CARTESIAN_POINT ( 'NONE', ( 25.70665373442555800, -15.78709708415398600, -26.02042135591559500 ) ) ; +#1537 = CARTESIAN_POINT ( 'NONE', ( 8.372572623236248300, -30.94309737860271900, 26.87549806554787300 ) ) ; +#1538 = CARTESIAN_POINT ( 'NONE', ( 23.27851385605900700, -12.49999999999999100, -14.42197159586385300 ) ) ; +#1539 = CARTESIAN_POINT ( 'NONE', ( 24.14287835267010300, -19.18877794579571700, 23.32731953193691500 ) ) ; +#1540 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7537, #10895, #8686, #1989, #9806, #3103, #10945, #4211, #12045, #5321, #13159, #6450, #14251, #7584 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -3.014604540362218900E-005, 0.003778322500954966500, 0.007586791047313555700, 0.009491025320492849400, 0.01139525959367214400, 0.01329949386685143900, 0.01520372814003073300 ), + .UNSPECIFIED. ) ; +#1541 = CARTESIAN_POINT ( 'NONE', ( 33.43938030429743000, -12.50000000000131500, 15.69092357499238800 ) ) ; +#1542 = CARTESIAN_POINT ( 'NONE', ( 33.21480028840967700, -31.01584194703513500, 25.75349158834004700 ) ) ; +#1543 = CARTESIAN_POINT ( 'NONE', ( 11.16307472532665900, -30.81569364417434500, 27.90977536026423400 ) ) ; +#1544 = CARTESIAN_POINT ( 'NONE', ( 16.72870318299316500, -19.69134143700637900, 23.27960477161278200 ) ) ; +#1545 = CARTESIAN_POINT ( 'NONE', ( 5.247864891988915500, -22.15672026673303900, -14.43678786800655600 ) ) ; +#1546 = CARTESIAN_POINT ( 'NONE', ( 34.99370791656568300, -22.44339554216626800, -12.38125094426220800 ) ) ; +#1547 = CARTESIAN_POINT ( 'NONE', ( 33.49755364887393200, -21.67606756967087400, -17.88236968623379800 ) ) ; +#1548 = ORIENTED_EDGE ( 'NONE', *, *, #9720, .T. ) ; +#1549 = CARTESIAN_POINT ( 'NONE', ( 17.25461510014082800, -22.38184157899306500, -27.18325274123429100 ) ) ; +#1550 = CARTESIAN_POINT ( 'NONE', ( 30.76595330252563100, -94.71799171675306200, 17.27888539430095000 ) ) ; +#1551 = CARTESIAN_POINT ( 'NONE', ( 22.35960462362702800, -27.96255689439422200, 27.45771657700752000 ) ) ; +#1552 = CARTESIAN_POINT ( 'NONE', ( 33.84583662604404000, -19.48716218832651500, 18.12057905823348500 ) ) ; +#1553 = DIRECTION ( 'NONE', ( 0.5022676430279096000, 0.0000000000000000000, 0.8647122149982550100 ) ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 12.41884807580756000, -11.69201990622212000, 24.56152558417743100 ) ) ; +#1555 = CARTESIAN_POINT ( 'NONE', ( 9.328424383084442400, -30.69812410257161900, 27.28192999658522700 ) ) ; +#1556 = CARTESIAN_POINT ( 'NONE', ( 35.25409040407620200, -31.01092317249925400, 23.62572232324148700 ) ) ; +#1557 = ADVANCED_FACE ( 'NONE', ( #7605 ), #4933, .F. ) ; +#1558 = CARTESIAN_POINT ( 'NONE', ( 35.73510685140185900, -94.67499814371679200, 8.080013532756353800 ) ) ; +#1559 = CARTESIAN_POINT ( 'NONE', ( 6.095973999098668500, -30.73473860953296500, 25.45339317700921100 ) ) ; +#1560 = ORIENTED_EDGE ( 'NONE', *, *, #10275, .F. ) ; +#1561 = CARTESIAN_POINT ( 'NONE', ( 34.98238387557821500, -22.59917174938624000, 8.278775946332046900 ) ) ; +#1562 = CARTESIAN_POINT ( 'NONE', ( 10.07451601296289200, -23.89562853093168800, 17.56191710121905900 ) ) ; +#1563 = CARTESIAN_POINT ( 'NONE', ( 7.295985187759987100, -10.00000000000000000, -26.91813081087817800 ) ) ; +#1564 = PLANE ( 'NONE', #1448 ) ; +#1565 = CARTESIAN_POINT ( 'NONE', ( 8.904276080177636400, -20.35701979662864100, -24.12109547953574700 ) ) ; +#1566 = CARTESIAN_POINT ( 'NONE', ( 3.719729089766241200, -30.66668535947101400, 22.52250281608009900 ) ) ; +#1567 = CARTESIAN_POINT ( 'NONE', ( 31.05005700241160200, -30.30980718148025900, 27.13314558402274900 ) ) ; +#1568 = CARTESIAN_POINT ( 'NONE', ( 7.460810358855478200, -30.42992209204426900, 26.42758924792250900 ) ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( 36.32471425911466400, -28.92385115262278100, 22.22331067387067100 ) ) ; +#1570 = CIRCLE ( 'NONE', #1344, 7.500000000000001800 ) ; +#1571 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6746, #7886, #1233, #9027 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001180033516842600700 ), + .UNSPECIFIED. ) ; +#1572 = ORIENTED_EDGE ( 'NONE', *, *, #4696, .F. ) ; +#1573 = CARTESIAN_POINT ( 'NONE', ( 4.211208277117640900, -30.32291616414062600, 24.03270616280899600 ) ) ; +#1574 = CARTESIAN_POINT ( 'NONE', ( 34.33544170469156100, -7.560750906607407500, 25.00000000000000400 ) ) ; +#1575 = CARTESIAN_POINT ( 'NONE', ( 9.830928196573088600, -12.37602426264096400, -25.07890533134019200 ) ) ; +#1576 = CARTESIAN_POINT ( 'NONE', ( 17.68719255689185800, -31.29913968154959000, 28.74438700826458900 ) ) ; +#1577 = CARTESIAN_POINT ( 'NONE', ( 28.00190102662527600, -20.64756627032260300, -25.98808679060932600 ) ) ; +#1578 = CARTESIAN_POINT ( 'NONE', ( 4.900576339233500900, -28.61651213332917700, 22.99845019460803600 ) ) ; +#1579 = CARTESIAN_POINT ( 'NONE', ( 25.83855999994674200, -20.82691742188987000, -23.94702649006437100 ) ) ; +#1580 = CARTESIAN_POINT ( 'NONE', ( 33.06168793692703600, -19.08063594697817700, 19.13708758966349100 ) ) ; +#1581 = CARTESIAN_POINT ( 'NONE', ( 24.67408448695036700, -12.50000000000002100, 8.839662931258535700 ) ) ; +#1582 = AXIS2_PLACEMENT_3D ( 'NONE', #11479, #4743, #12580 ) ; +#1583 = CARTESIAN_POINT ( 'NONE', ( 33.03684838157283800, -29.94456262726024300, 26.06900926591492900 ) ) ; +#1584 = CARTESIAN_POINT ( 'NONE', ( 3.692302133271756000, -30.11710550026472800, 12.31106729370458400 ) ) ; +#1585 = ORIENTED_EDGE ( 'NONE', *, *, #12939, .F. ) ; +#1586 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455800, -30.82654731345000300, 27.93780948130459400 ) ) ; +#1587 = CARTESIAN_POINT ( 'NONE', ( 23.50764528053904500, -22.46230936223756900, -27.19744138249809900 ) ) ; +#1588 = CARTESIAN_POINT ( 'NONE', ( 5.052905162028565700, -12.50000000000021100, -12.35618489378941800 ) ) ; +#1589 = CARTESIAN_POINT ( 'NONE', ( 30.77365963647577700, -21.19534627331519500, -21.32206238696461800 ) ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( 32.14107331627084800, -12.49999999999921300, -18.42438945147587900 ) ) ; +#1591 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12810, #4970, #10548, #3827, #11671, #4931, #12774, #6065, #13875, #7192 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001954927562225131900, 0.003909855124450263700, 0.005864782686675400400, 0.007819710248900537900 ), + .UNSPECIFIED. ) ; +#1592 = CARTESIAN_POINT ( 'NONE', ( 22.49272538113968500, -27.99003030185993200, 27.51045287396560800 ) ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( 34.14467042113097500, -95.07596123493894400, 13.54325314916474800 ) ) ; +#1594 = CARTESIAN_POINT ( 'NONE', ( 30.78811424588831600, -30.36675258535515100, 27.24784117306187500 ) ) ; +#1595 = CARTESIAN_POINT ( 'NONE', ( 5.410446972845001300, -99.99999999999998600, -28.90004843828752700 ) ) ; +#1596 = VERTEX_POINT ( 'NONE', #2817 ) ; +#1597 = CARTESIAN_POINT ( 'NONE', ( 32.50408878592602200, -19.08668166249141500, 19.65949424415725500 ) ) ; +#1598 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -97.35820291738771500, 15.16587576123127200 ) ) ; +#1599 = CARTESIAN_POINT ( 'NONE', ( 9.342146039989396300, -30.40014449097157000, 27.30207408446403200 ) ) ; +#1600 = CARTESIAN_POINT ( 'NONE', ( 35.59577010163170000, -29.96119076415360600, 24.29384515214556500 ) ) ; +#1601 = ORIENTED_EDGE ( 'NONE', *, *, #6986, .T. ) ; +#1602 = CARTESIAN_POINT ( 'NONE', ( 39.97161784026550900, 9.894538436513098400, -18.88806036896969300 ) ) ; +#1603 = CARTESIAN_POINT ( 'NONE', ( 15.54022254565313200, -18.02808257376097200, 23.58443243889106000 ) ) ; +#1604 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 15.51856112887630200 ) ) ; +#1605 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.520606794341278000, 25.00000000000000000 ) ) ; +#1606 = CARTESIAN_POINT ( 'NONE', ( 6.147045907277842500, -29.86007889532744000, 25.53849084147029600 ) ) ; +#1607 = ORIENTED_EDGE ( 'NONE', *, *, #12471, .F. ) ; +#1608 = CARTESIAN_POINT ( 'NONE', ( 9.644061904993058900, -12.50000000000011200, 19.29667979006693600 ) ) ; +#1609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807100E-016, -1.000000000000000000 ) ) ; +#1610 = CARTESIAN_POINT ( 'NONE', ( 3.258332750485386500, -29.49234181769562100, 22.74984162823878000 ) ) ; +#1611 = CARTESIAN_POINT ( 'NONE', ( 0.4733895217850374000, -11.89371231855241900, 7.970623825913865100 ) ) ; +#1612 = ORIENTED_EDGE ( 'NONE', *, *, #11463, .F. ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( 31.07004147496698500, -30.71176273340665100, 27.10786227834025700 ) ) ; +#1614 = CARTESIAN_POINT ( 'NONE', ( 2.201604286630126400, -18.80694826461782700, -11.70378783570185500 ) ) ; +#1615 = CARTESIAN_POINT ( 'NONE', ( 7.905490788751308200, -31.12763085423490100, 26.40341748237328900 ) ) ; +#1616 = CARTESIAN_POINT ( 'NONE', ( 37.37466922671805500, -29.72704630885721500, 22.05538777785570300 ) ) ; +#1617 = ORIENTED_EDGE ( 'NONE', *, *, #2956, .T. ) ; +#1618 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -3.469446951953614200E-015, 20.00000000000000000 ) ) ; +#1619 = CARTESIAN_POINT ( 'NONE', ( 4.625592820304859700, -29.22445063430114600, 23.89597742250731800 ) ) ; +#1620 = CARTESIAN_POINT ( 'NONE', ( 39.65310081554807900, -10.89710531026804800, -13.97037797778873800 ) ) ; +#1621 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1622 = CARTESIAN_POINT ( 'NONE', ( 36.28720882214240400, -14.90592932398488000, -20.39698914555557600 ) ) ; +#1623 = CARTESIAN_POINT ( 'NONE', ( 23.85034020288103600, -21.45892952467446000, -27.02051844523671800 ) ) ; +#1624 = ADVANCED_FACE ( 'NONE', ( #147 ), #14353, .T. ) ; +#1625 = ORIENTED_EDGE ( 'NONE', *, *, #8792, .F. ) ; +#1626 = CARTESIAN_POINT ( 'NONE', ( 24.63428626518401600, -12.49999999999979900, -22.75762506942911000 ) ) ; +#1627 = CARTESIAN_POINT ( 'NONE', ( 37.79765555455552600, -18.80937778177775900, 8.005331014629280900 ) ) ; +#1628 = CARTESIAN_POINT ( 'NONE', ( 33.99556781382619200, -23.18012702743711600, 12.44499923882805200 ) ) ; +#1629 = CARTESIAN_POINT ( 'NONE', ( 33.10067642321987300, -30.72430324520138000, 26.03102665674853700 ) ) ; +#1630 = CARTESIAN_POINT ( 'NONE', ( 2.505061069587509100, -27.63065482122843300, 9.396694007209054800 ) ) ; +#1631 = ORIENTED_EDGE ( 'NONE', *, *, #4240, .T. ) ; +#1632 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001100, 27.93780948130460100 ) ) ; +#1633 = CARTESIAN_POINT ( 'NONE', ( 26.47661980746534400, -22.42222675451906300, -26.68083734152953900 ) ) ; +#1634 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -90.97466676702757100, -3.162219049127059600 ) ) ; +#1635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1636 = FACE_OUTER_BOUND ( 'NONE', #1768, .T. ) ; +#1637 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1638 = CARTESIAN_POINT ( 'NONE', ( 33.08845291937701900, -29.74248465295542900, 25.95747797374506400 ) ) ; +#1639 = CARTESIAN_POINT ( 'NONE', ( 11.92068888923827400, -99.99999999999998600, -37.03852336990893000 ) ) ; +#1640 = VERTEX_POINT ( 'NONE', #2927 ) ; +#1641 = CARTESIAN_POINT ( 'NONE', ( 29.91721433893440400, -20.11591501613179400, 21.23351267712133600 ) ) ; +#1642 = CARTESIAN_POINT ( 'NONE', ( 37.39212512534899000, -21.07505975040301700, 9.690484136233822100 ) ) ; +#1643 = CARTESIAN_POINT ( 'NONE', ( 9.630592936334933200, -30.78190937171256200, 27.38857608305876200 ) ) ; +#1644 = CARTESIAN_POINT ( 'NONE', ( 35.27783374065738500, -30.91276104921870900, 23.84675328546712000 ) ) ; +#1645 = CYLINDRICAL_SURFACE ( 'NONE', #708, 10.00000000000000200 ) ; +#1646 = ORIENTED_EDGE ( 'NONE', *, *, #12203, .F. ) ; +#1647 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -30.66316004086981200, 28.85652737809770600 ) ) ; +#1648 = CARTESIAN_POINT ( 'NONE', ( 29.74492851531600800, -94.73843261911831300, 17.60637084630385400 ) ) ; +#1649 = VECTOR ( 'NONE', #8165, 1000.000000000000000 ) ; +#1650 = CARTESIAN_POINT ( 'NONE', ( 3.610263647661896300, -23.25294470837840100, 13.23697626376274000 ) ) ; +#1651 = CARTESIAN_POINT ( 'NONE', ( 32.24191677668957800, -9.668434184804473500, 25.00000000000000000 ) ) ; +#1652 = CARTESIAN_POINT ( 'NONE', ( 6.283856170077811500, -31.05395725009329100, 25.32524774968139200 ) ) ; +#1653 = CARTESIAN_POINT ( 'NONE', ( 41.95197807713294200, -9.999999999999994700, 7.973317905860366000 ) ) ; +#1654 = CARTESIAN_POINT ( 'NONE', ( 16.23362081403655600, -12.50000000000005500, 9.786936892229753900 ) ) ; +#1655 = CARTESIAN_POINT ( 'NONE', ( 22.53596310834423400, -27.96616264953000900, 27.45684688033683300 ) ) ; +#1656 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1657 = AXIS2_PLACEMENT_3D ( 'NONE', #1467, #9263, #2563 ) ; +#1658 = CARTESIAN_POINT ( 'NONE', ( -1.951041133467518600, -10.00000000000001100, 8.187451582248062500 ) ) ; +#1659 = ORIENTED_EDGE ( 'NONE', *, *, #7105, .T. ) ; +#1660 = CARTESIAN_POINT ( 'NONE', ( 31.04902565464810800, -31.04648351761302600, 27.00090185789679300 ) ) ; +#1661 = FACE_OUTER_BOUND ( 'NONE', #10838, .T. ) ; +#1662 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#1663 = CARTESIAN_POINT ( 'NONE', ( 7.845537710422455300, -30.61578202383259400, 26.60641319214294500 ) ) ; +#1664 = CARTESIAN_POINT ( 'NONE', ( 36.32654704514334300, -30.65931436124154200, 21.91671927247508100 ) ) ; +#1665 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1666 = ORIENTED_EDGE ( 'NONE', *, *, #2454, .F. ) ; +#1667 = CARTESIAN_POINT ( 'NONE', ( 4.460735049028145700, -30.69114086547749700, 23.92420389679858800 ) ) ; +#1668 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -39.52045731841471400, 19.79474689191102500 ) ) ; +#1669 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1670 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -22.03500000000001400, 8.479427558116794800 ) ) ; +#1671 = FACE_OUTER_BOUND ( 'NONE', #13740, .T. ) ; +#1672 = CARTESIAN_POINT ( 'NONE', ( 29.55501824773247700, -30.76265863428254500, 27.69068819673094900 ) ) ; +#1673 = CARTESIAN_POINT ( 'NONE', ( -7.269878102763371300E-009, -10.00000000000000000, -11.53233011336613600 ) ) ; +#1674 = CARTESIAN_POINT ( 'NONE', ( 22.54568490267498900, -28.77949532703398500, 29.18866828975543400 ) ) ; +#1675 = ORIENTED_EDGE ( 'NONE', *, *, #14390, .F. ) ; +#1676 = CARTESIAN_POINT ( 'NONE', ( 22.83319762738315700, -12.49999999999999600, -14.52730196364944400 ) ) ; +#1677 = CARTESIAN_POINT ( 'NONE', ( 37.08739755751949500, -28.75538133191318100, 19.32568846118232400 ) ) ; +#1678 = CARTESIAN_POINT ( 'NONE', ( 34.71981894663775100, -12.50000000000001200, 12.52800554336743700 ) ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( 32.90360623934692800, -29.79610682769402900, 26.08852495157644600 ) ) ; +#1680 = VERTEX_POINT ( 'NONE', #9634 ) ; +#1681 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#1682 = CARTESIAN_POINT ( 'NONE', ( 36.02527752275634000, -21.77816499679147500, -18.50517622460413800 ) ) ; +#1683 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -96.75657634286285700, 6.749301598762013300 ) ) ; +#1684 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#1685 = VECTOR ( 'NONE', #8102, 1000.000000000000000 ) ; +#1686 = CARTESIAN_POINT ( 'NONE', ( 35.06896833884738400, -29.22189706588603300, 24.16563513660007300 ) ) ; +#1687 = CARTESIAN_POINT ( 'NONE', ( 37.87392192486300500, -26.78030714898307700, 6.717882004940181100 ) ) ; +#1688 = CARTESIAN_POINT ( 'NONE', ( 28.60281975428859600, -19.75202671621999400, 21.97200564724045400 ) ) ; +#1689 = CARTESIAN_POINT ( 'NONE', ( 30.36516402104513500, -20.13919956912378600, 20.95822215629547400 ) ) ; +#1690 = CARTESIAN_POINT ( 'NONE', ( 9.636211618429804600, -30.51705222320589400, 27.42048209352898500 ) ) ; +#1691 = CARTESIAN_POINT ( 'NONE', ( 35.37992195836217500, -29.53143998697187200, 24.21751532246359100 ) ) ; +#1692 = ORIENTED_EDGE ( 'NONE', *, *, #14126, .T. ) ; +#1693 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.08917251752039600, 7.821153000267014700 ) ) ; +#1694 = CARTESIAN_POINT ( 'NONE', ( 26.77111932795739300, -93.16752028773359500, 22.50621492201093000 ) ) ; +#1695 = ADVANCED_FACE ( 'NONE', ( #8276 ), #7641, .F. ) ; +#1696 = CARTESIAN_POINT ( 'NONE', ( 27.87242783778310000, -10.98191071730508600, 24.82686264789321500 ) ) ; +#1697 = CARTESIAN_POINT ( 'NONE', ( 11.74758597536565000, -20.16398837647169600, 22.05129773411999100 ) ) ; +#1698 = CARTESIAN_POINT ( 'NONE', ( 28.85272605670420600, -11.09276304567418100, 24.42769486508408100 ) ) ; +#1699 = CARTESIAN_POINT ( 'NONE', ( 6.159710860632237900, -30.24565836584902800, 25.63952763225922400 ) ) ; +#1700 = CARTESIAN_POINT ( 'NONE', ( 39.52585197033686600, -11.89343592509055700, 8.162922188755688400 ) ) ; +#1701 = CARTESIAN_POINT ( 'NONE', ( 12.64276906996061500, -24.09929978956397200, 19.01340240910384300 ) ) ; +#1702 = CARTESIAN_POINT ( 'NONE', ( 12.52583136674241600, -10.57173647244820600, 24.89918743405230500 ) ) ; +#1703 = CARTESIAN_POINT ( 'NONE', ( 0.02918762885700241400, -10.00000000000022600, 9.058132740781010400 ) ) ; +#1704 = ORIENTED_EDGE ( 'NONE', *, *, #13787, .T. ) ; +#1705 = CARTESIAN_POINT ( 'NONE', ( 30.97043025332005300, -30.63063572660339800, 27.16508021407784300 ) ) ; +#1706 = CARTESIAN_POINT ( 'NONE', ( 9.832841770293001100, -28.70988943834721100, 27.66501807985933300 ) ) ; +#1707 = CARTESIAN_POINT ( 'NONE', ( 7.905328525829409300, -30.01974484468115300, 26.59907947583153400 ) ) ; +#1708 = CARTESIAN_POINT ( 'NONE', ( 37.09236635848701300, -29.39431584121600900, 22.22724311760113000 ) ) ; +#1709 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3081, #5298, #13138, #6429, #14233, #7566, #918, #8708, #2017, #9831 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( -6.000000000795894100E-008, 0.001582585301710954200, 0.003165230603421916400, 0.004747875905132877900, 0.006330521206843840200 ), + .UNSPECIFIED. ) ; +#1710 = CARTESIAN_POINT ( 'NONE', ( 36.24311286946803500, -99.99999999999998600, 17.91938285900820600 ) ) ; +#1711 = CARTESIAN_POINT ( 'NONE', ( 4.460731983746552700, -29.58107270359773700, 24.11995318404548900 ) ) ; +#1712 = CARTESIAN_POINT ( 'NONE', ( 13.41847968843430500, -39.15315981854291000, 19.29429091335461200 ) ) ; +#1713 = CARTESIAN_POINT ( 'NONE', ( 42.51152272974299300, -95.07596123493894400, -3.205230653520717300 ) ) ; +#1714 = CARTESIAN_POINT ( 'NONE', ( 39.30616145365468800, -10.85185355336640400, 13.24586063172338900 ) ) ; +#1715 = CARTESIAN_POINT ( 'NONE', ( 33.75470228449974300, -100.0000000000000100, -0.4996131600212508900 ) ) ; +#1716 = CARTESIAN_POINT ( 'NONE', ( 29.55550521535993300, -30.89447256195594000, 27.66328280044445300 ) ) ; +#1717 = CARTESIAN_POINT ( 'NONE', ( 32.25567112787248200, -100.0000000000000700, 19.84282872635087000 ) ) ; +#1718 = CARTESIAN_POINT ( 'NONE', ( 22.48146071973761900, -28.77816371652368900, 29.18890308861620000 ) ) ; +#1719 = AXIS2_PLACEMENT_3D ( 'NONE', #12383, #5670, #13488 ) ; +#1720 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1721 = CARTESIAN_POINT ( 'NONE', ( 24.86364332594131500, -12.49999999999995600, 8.403938836285972200 ) ) ; +#1722 = CARTESIAN_POINT ( 'NONE', ( 33.02265143031425500, -30.54021483797521300, 26.14526515902551700 ) ) ; +#1723 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( 28.23955314646853100, -9.781278341185474900, -24.99999999999999600 ) ) ; +#1725 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438938600, 7.359713671239108900, 20.69000000000000100 ) ) ; +#1726 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 12.00000000000000000, -19.99999999999999600 ) ) ; +#1727 = CARTESIAN_POINT ( 'NONE', ( 17.41617123378815900, -12.50000000000000200, -14.54982114394511900 ) ) ; +#1728 = CIRCLE ( 'NONE', #4834, 3.189999999999995100 ) ; +#1729 = CARTESIAN_POINT ( 'NONE', ( 35.78414084458585600, -10.00000000000000700, -24.95404270507160000 ) ) ; +#1730 = CARTESIAN_POINT ( 'NONE', ( 35.85820325562779900, -29.03469719440713300, 23.11380952341250300 ) ) ; +#1731 = CARTESIAN_POINT ( 'NONE', ( 12.71628119899220400, -99.99999999999998600, 21.23471675491335000 ) ) ; +#1732 = CARTESIAN_POINT ( 'NONE', ( 27.22944053818233500, -19.44474723802545700, 22.58006546787215300 ) ) ; +#1733 = ORIENTED_EDGE ( 'NONE', *, *, #9398, .F. ) ; +#1734 = CARTESIAN_POINT ( 'NONE', ( 30.72910746810425700, -94.73575769388216400, 17.24884210202500500 ) ) ; +#1735 = DIRECTION ( 'NONE', ( -4.336808689942017100E-017, -1.000000000000000000, -3.469446951953615200E-016 ) ) ; +#1736 = CARTESIAN_POINT ( 'NONE', ( 9.835160018998443800, -30.88412193842243900, 27.44230632742167200 ) ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( 35.50401225430783800, -30.57568501475489600, 24.14311390692934400 ) ) ; +#1738 = AXIS2_PLACEMENT_3D ( 'NONE', #7752, #1096, #8886 ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000129300, -94.82601771544352700, 5.941839880698722700 ) ) ; +#1740 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -22.46243069294107600, -27.19746277637471700 ) ) ; +#1741 = CARTESIAN_POINT ( 'NONE', ( 6.497348038175876400, -31.16790831829952800, 25.37760726964134500 ) ) ; +#1742 = FACE_OUTER_BOUND ( 'NONE', #2425, .T. ) ; +#1743 = CARTESIAN_POINT ( 'NONE', ( 39.97081202841342000, -10.00000000000000500, 9.058139085988965900 ) ) ; +#1744 = CARTESIAN_POINT ( 'NONE', ( 12.12106930680499100, -12.50000000000000500, 20.84730249389951600 ) ) ; +#1745 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5800, #8221, #10467, #3757 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -5.999999998143340300E-008, 0.0001700933563620634900 ), + .UNSPECIFIED. ) ; +#1746 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.999999999999998200, 20.00000000000000000 ) ) ; +#1747 = VERTEX_POINT ( 'NONE', #14305 ) ; +#1748 = CARTESIAN_POINT ( 'NONE', ( 0.8338667095378822200, -11.88888658941572300, 11.56246881425224200 ) ) ; +#1749 = CARTESIAN_POINT ( 'NONE', ( 30.95426267259299300, -31.01271386554270700, 27.06062879195276900 ) ) ; +#1750 = CARTESIAN_POINT ( 'NONE', ( 9.666789578467060600, -27.14146400895356200, 19.78085212555405500 ) ) ; +#1751 = CARTESIAN_POINT ( 'NONE', ( 8.047841252365470800, -30.77869582134237800, 26.66462370087242200 ) ) ; +#1752 = CARTESIAN_POINT ( 'NONE', ( 36.54743724621765500, -30.56395087294144000, 22.02818125732799000 ) ) ; +#1753 = CARTESIAN_POINT ( 'NONE', ( 4.877113684006869400, -95.07596123493893000, 10.90036813677221000 ) ) ; +#1754 = CARTESIAN_POINT ( 'NONE', ( 4.782570447827192900, -30.97677313995653800, 23.78196110002431900 ) ) ; +#1755 = CARTESIAN_POINT ( 'NONE', ( 12.35197141815638100, -31.80744843288429300, 20.24908556833202800 ) ) ; +#1756 = CARTESIAN_POINT ( 'NONE', ( 35.65327037024449200, -95.07596123493894400, 2.206608581395516700 ) ) ; +#1757 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 12.00000000000000000, 22.50000000000000000 ) ) ; +#1758 = VERTEX_POINT ( 'NONE', #7645 ) ; +#1759 = CARTESIAN_POINT ( 'NONE', ( 30.18167656173557800, -22.03500000000001400, 17.72490760734140400 ) ) ; +#1760 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7628, #1115, #10025, #3313, #11162, #4435, #12264, #5539, #13371, #6673, #78, #7816, #1168, #8952 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -2.721382966754283300E-005, 0.0004568952540619268500, 0.0009410043377913965800, 0.001909222505250342800, 0.003845658840168233700, 0.005782095175086124500, 0.007718531510004015400 ), + .UNSPECIFIED. ) ; +#1761 = CARTESIAN_POINT ( 'NONE', ( 29.24770357410535500, -30.75686736190240800, 27.79217481295210800 ) ) ; +#1762 = CARTESIAN_POINT ( 'NONE', ( 24.32375734990285600, -97.40649683660852500, 22.08787631849742900 ) ) ; +#1763 = ADVANCED_FACE ( 'NONE', ( #7207 ), #5130, .T. ) ; +#1764 = CARTESIAN_POINT ( 'NONE', ( 27.47435164403901500, -10.57156909987244100, 24.89921694635324900 ) ) ; +#1765 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238400 ) ) ; +#1766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1767 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.734723475976807100E-016 ) ) ; +#1768 = EDGE_LOOP ( 'NONE', ( #13989, #6743, #5783, #8562 ) ) ; +#1769 = CARTESIAN_POINT ( 'NONE', ( 34.47034867866185700, -22.99878744438091600, 11.14356958045641300 ) ) ; +#1770 = CARTESIAN_POINT ( 'NONE', ( 32.90329863056474800, -31.16330662317844600, 25.84697283003198400 ) ) ; +#1771 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995600, -27.36471617542558800, 6.614837272327574300 ) ) ; +#1772 = CARTESIAN_POINT ( 'NONE', ( 29.16105652557748200, -10.44529040736067100, -25.03430901551863400 ) ) ; +#1773 = PLANE ( 'NONE', #3845 ) ; +#1774 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1775 = CARTESIAN_POINT ( 'NONE', ( 15.19857120573598600, -20.79318610635495200, -24.18717240996041800 ) ) ; +#1776 = ORIENTED_EDGE ( 'NONE', *, *, #9292, .F. ) ; +#1777 = CARTESIAN_POINT ( 'NONE', ( 14.36474105855077700, -16.36836018234678000, 23.82050723232153900 ) ) ; +#1778 = CARTESIAN_POINT ( 'NONE', ( 36.23434444743358500, -28.94630115946492000, 22.42817230198329900 ) ) ; +#1779 = CARTESIAN_POINT ( 'NONE', ( 2.398790421506550100, -19.59549657208750200, 7.968836299651834500 ) ) ; +#1780 = CARTESIAN_POINT ( 'NONE', ( 25.79031003262086200, -19.17545019063280900, 23.05505102744361100 ) ) ; +#1781 = VERTEX_POINT ( 'NONE', #13978 ) ; +#1782 = CARTESIAN_POINT ( 'NONE', ( 14.26277456038102400, -24.17694692910377100, 19.56632097517446000 ) ) ; +#1783 = CARTESIAN_POINT ( 'NONE', ( 2.420118497675019000, -10.00118533589578000, 20.28354112649185800 ) ) ; +#1784 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999990200, -21.23116646380263400, -11.74895849411025100 ) ) ; +#1785 = CARTESIAN_POINT ( 'NONE', ( 9.833824695530269700, -30.65690722948110300, 27.48655418184759100 ) ) ; +#1786 = CARTESIAN_POINT ( 'NONE', ( 35.03000302152939600, -29.26066209623669000, 24.24522920780658800 ) ) ; +#1787 = CARTESIAN_POINT ( 'NONE', ( 15.73281005629242900, -12.50000000000002100, 9.387237810473857600 ) ) ; +#1788 = CARTESIAN_POINT ( 'NONE', ( 37.09703781758444300, -92.41467508777128600, 1.255243565481105600 ) ) ; +#1789 = CARTESIAN_POINT ( 'NONE', ( 2.584490992104677700, -18.88976737421565800, 11.31291419060196200 ) ) ; +#1790 = EDGE_CURVE ( 'NONE', #7419, #12242, #14387, .T. ) ; +#1791 = ORIENTED_EDGE ( 'NONE', *, *, #5682, .F. ) ; +#1792 = CARTESIAN_POINT ( 'NONE', ( 2.499439441576377000, -20.40728922333055500, 7.868623002492467900 ) ) ; +#1793 = CARTESIAN_POINT ( 'NONE', ( 35.79380799812484100, -28.72273015671888500, 22.40515160545519500 ) ) ; +#1794 = CARTESIAN_POINT ( 'NONE', ( 6.331816689928774400, -30.47323394316564600, 25.73805922388285300 ) ) ; +#1795 = CARTESIAN_POINT ( 'NONE', ( 35.75286054692203700, -18.61951710390591700, -19.57978147832441000 ) ) ; +#1796 = CARTESIAN_POINT ( 'NONE', ( 41.54036434905235400, -10.00000000000000000, 12.05614322133489000 ) ) ; +#1797 = CARTESIAN_POINT ( 'NONE', ( 16.72148614393795500, -12.50000000000002500, 10.01379707815132200 ) ) ; +#1798 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 14.31000000000000900 ) ) ; +#1799 = VERTEX_POINT ( 'NONE', #9573 ) ; +#1800 = CIRCLE ( 'NONE', #9217, 2.500000000000002200 ) ; +#1801 = CARTESIAN_POINT ( 'NONE', ( 0.6800497627110805300, -10.00000000000000000, 17.95036530235348900 ) ) ; +#1802 = CARTESIAN_POINT ( 'NONE', ( 30.76644211612924500, -30.52102309448427400, 27.25916282637269500 ) ) ; +#1803 = CARTESIAN_POINT ( 'NONE', ( 7.437840060393661200, -20.78193668869923300, 19.17199578342699300 ) ) ; +#1804 = CARTESIAN_POINT ( 'NONE', ( 8.072960584503780600, -30.19299212970937100, 26.71813456296627700 ) ) ; +#1805 = CARTESIAN_POINT ( 'NONE', ( 36.39631166771634000, -29.09382461397968500, 22.59781661922889000 ) ) ; +#1806 = ORIENTED_EDGE ( 'NONE', *, *, #13060, .T. ) ; +#1807 = CARTESIAN_POINT ( 'NONE', ( 2.499999999998235200, -95.10391797849828800, 7.304666556797252900 ) ) ; +#1808 = CARTESIAN_POINT ( 'NONE', ( 4.393083884302249900, -30.00407579812658600, 24.29560401355810800 ) ) ; +#1809 = CARTESIAN_POINT ( 'NONE', ( 6.380948395823942600, -31.90308803100099800, 24.97660230409183400 ) ) ; +#1810 = CARTESIAN_POINT ( 'NONE', ( 32.46139924881194400, -89.42430879162712600, 7.195777944474664300 ) ) ; +#1811 = CARTESIAN_POINT ( 'NONE', ( 1.666314553252604000E-012, -10.63028971457597600, 10.52638422378454700 ) ) ; +#1812 = ORIENTED_EDGE ( 'NONE', *, *, #10257, .T. ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( 25.78987907430276700, -100.0000000000000100, 6.210915839114816700 ) ) ; +#1814 = SPHERICAL_SURFACE ( 'NONE', #9303, 2.500000000000000000 ) ; +#1815 = CARTESIAN_POINT ( 'NONE', ( 29.24770516084377900, -30.84221568683928200, 27.77712499846749600 ) ) ; +#1816 = CARTESIAN_POINT ( 'NONE', ( 34.12783056561144000, -99.99999999999998600, 19.05843952994852600 ) ) ; +#1817 = CARTESIAN_POINT ( 'NONE', ( 2.326442381267738800, -12.51930356225333600, -19.06581063114624900 ) ) ; +#1818 = CARTESIAN_POINT ( 'NONE', ( 22.88132563828735400, -30.67114755350550600, 28.85511851645391300 ) ) ; +#1819 = CARTESIAN_POINT ( 'NONE', ( 36.41232774350042700, -30.59594650054929600, 21.64945239398007000 ) ) ; +#1820 = CARTESIAN_POINT ( 'NONE', ( 2.499999409737029100, -29.76883431205936900, 21.59875012312539900 ) ) ; +#1821 = CARTESIAN_POINT ( 'NONE', ( 5.313280731601868600, -20.28809933266904900, -14.44472149493832600 ) ) ; +#1822 = CARTESIAN_POINT ( 'NONE', ( 35.07841187177738400, -12.50000000000053600, 10.40907286707706300 ) ) ; +#1823 = EDGE_LOOP ( 'NONE', ( #10777, #1854 ) ) ; +#1824 = CARTESIAN_POINT ( 'NONE', ( 32.73156936735033200, -30.40606437437470400, 26.32568358450601700 ) ) ; +#1825 = CARTESIAN_POINT ( 'NONE', ( 22.44830178104269800, -27.96429675855983300, 27.45736485622386200 ) ) ; +#1826 = CARTESIAN_POINT ( 'NONE', ( 29.91313626180316000, -10.95015321113944600, -24.99999999999969100 ) ) ; +#1827 = CARTESIAN_POINT ( 'NONE', ( 13.84214090145239400, -12.49999999999999300, -22.39548820172703400 ) ) ; +#1828 = CIRCLE ( 'NONE', #8278, 2.500000000000000000 ) ; +#1829 = ORIENTED_EDGE ( 'NONE', *, *, #9982, .T. ) ; +#1830 = AXIS2_PLACEMENT_3D ( 'NONE', #3391, #11236, #4507 ) ; +#1831 = CARTESIAN_POINT ( 'NONE', ( 39.93182337880647000, -10.27270648477410300, 11.21298220506150800 ) ) ; +#1832 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1833 = CARTESIAN_POINT ( 'NONE', ( 11.52187031215543000, -10.84265527243774600, 24.70719428823489500 ) ) ; +#1834 = CARTESIAN_POINT ( 'NONE', ( 23.76932924787320900, -19.95145080514648600, 23.19065767682773000 ) ) ; +#1835 = CARTESIAN_POINT ( 'NONE', ( 14.79981998860565700, -12.50000000000031600, 21.76546790596684000 ) ) ; +#1836 = ORIENTED_EDGE ( 'NONE', *, *, #13149, .F. ) ; +#1837 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.08917251800396300, 7.821153000182035500 ) ) ; +#1838 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -15.51856112887629800 ) ) ; +#1839 = CARTESIAN_POINT ( 'NONE', ( 10.24077494877024100, -30.91852489918252200, 27.58469371568612500 ) ) ; +#1840 = CARTESIAN_POINT ( 'NONE', ( 35.44258337680376100, -30.30104821013999200, 24.44525017204125200 ) ) ; +#1841 = CARTESIAN_POINT ( 'NONE', ( 9.125503400168820900, -23.78771362990694300, 16.79141102454129700 ) ) ; +#1842 = CARTESIAN_POINT ( 'NONE', ( 11.76044685354238700, -10.21539878538069600, -25.03798061747447800 ) ) ; +#1843 = CARTESIAN_POINT ( 'NONE', ( 9.173530726448197100, -19.12574126281576900, 20.90597924010730700 ) ) ; +#1844 = LINE ( 'NONE', #6717, #3526 ) ; +#1845 = ADVANCED_FACE ( 'NONE', ( #13668, #5282 ), #13214, .T. ) ; +#1846 = ORIENTED_EDGE ( 'NONE', *, *, #14194, .F. ) ; +#1847 = CARTESIAN_POINT ( 'NONE', ( 2.500538543005222300, -21.22070855209459900, 7.919154235450585900 ) ) ; +#1848 = CARTESIAN_POINT ( 'NONE', ( 38.80698460182380000, -11.88716313963019800, 12.98794652908905300 ) ) ; +#1849 = CARTESIAN_POINT ( 'NONE', ( 6.496906828473840700, -29.63140644658470200, 25.64917680125005400 ) ) ; +#1850 = CARTESIAN_POINT ( 'NONE', ( 4.179262562054295100, -10.00000000000000400, 22.36143813341460500 ) ) ; +#1851 = CARTESIAN_POINT ( 'NONE', ( 37.21759011453396200, -11.88312031961277500, 16.73953205366785100 ) ) ; +#1852 = CARTESIAN_POINT ( 'NONE', ( 13.96103532974430400, -24.16502785117944200, 19.48150996382005200 ) ) ; +#1853 = CARTESIAN_POINT ( 'NONE', ( 36.97092141498169600, -12.03109745092054300, -20.52785382720449200 ) ) ; +#1854 = ORIENTED_EDGE ( 'NONE', *, *, #10275, .T. ) ; +#1855 = CARTESIAN_POINT ( 'NONE', ( 4.120066231229872100, -20.19332826912509300, -18.52763857108270400 ) ) ; +#1856 = CARTESIAN_POINT ( 'NONE', ( 5.631953255296028100, -9.999999999999088700, 21.07324526982981900 ) ) ; +#1857 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#1858 = CARTESIAN_POINT ( 'NONE', ( 30.76644379203459300, -30.88152249582336100, 27.19559839316680100 ) ) ; +#1859 = CARTESIAN_POINT ( 'NONE', ( 2.947749055084251800, -28.76920678331330800, 19.52380713428933800 ) ) ; +#1860 = CARTESIAN_POINT ( 'NONE', ( 8.360304966158894400, -30.99433288329408100, 26.73304490805680800 ) ) ; +#1861 = CARTESIAN_POINT ( 'NONE', ( 36.89890304786549500, -30.27247594752411400, 22.38738099962246900 ) ) ; +#1862 = VECTOR ( 'NONE', #4762, 1000.000000000000000 ) ; +#1863 = CARTESIAN_POINT ( 'NONE', ( -3.365226333685864900E-015, -22.50000000000000700, 10.14164662228683000 ) ) ; +#1864 = EDGE_LOOP ( 'NONE', ( #8617, #6449, #3433, #4693 ) ) ; +#1865 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -95.78490438491252200, 4.330279031978646400 ) ) ; +#1866 = CARTESIAN_POINT ( 'NONE', ( 4.850211094723992000, -31.03045646157288200, 23.74901346542334200 ) ) ; +#1867 = CARTESIAN_POINT ( 'NONE', ( 6.179888744975473400, -36.41337521273078400, 15.11734417445063400 ) ) ; +#1868 = CARTESIAN_POINT ( 'NONE', ( 27.71615737980297600, -95.07596123493894400, 15.30026349259854600 ) ) ; +#1869 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.285944569891247700, 15.54860894026075600 ) ) ; +#1870 = ORIENTED_EDGE ( 'NONE', *, *, #7955, .T. ) ; +#1871 = CARTESIAN_POINT ( 'NONE', ( 11.61160384066268500, -9.781278341184538800, -25.00000000000000000 ) ) ; +#1872 = CARTESIAN_POINT ( 'NONE', ( 29.14576629070979400, -30.74982035762057500, 27.82568026090799400 ) ) ; +#1873 = CARTESIAN_POINT ( 'NONE', ( 4.491364333549545200, -16.02319741445438000, -21.08502806703771500 ) ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( 39.53435007198005700, -11.86259971207974200, 8.074057808119883700 ) ) ; +#1875 = CARTESIAN_POINT ( 'NONE', ( 35.99533168647212000, -30.81274708353531000, 22.56820078496018300 ) ) ; +#1876 = CARTESIAN_POINT ( 'NONE', ( 3.547094498902843500, -28.87175910417849100, 21.75692909536250500 ) ) ; +#1877 = CIRCLE ( 'NONE', #6168, 1.200000000000006600 ) ; +#1878 = CARTESIAN_POINT ( 'NONE', ( 7.296162173107998900, -100.0000000000000300, -33.00341147329402200 ) ) ; +#1879 = CARTESIAN_POINT ( 'NONE', ( 24.98053910467385900, -12.49999999999994300, 7.897148574734315800 ) ) ; +#1880 = CARTESIAN_POINT ( 'NONE', ( 32.66531349365026000, -31.05598340102123000, 26.10085567766605100 ) ) ; +#1881 = CARTESIAN_POINT ( 'NONE', ( 30.65949066439842200, -11.86805822338926800, -24.99999999999999600 ) ) ; +#1882 = CARTESIAN_POINT ( 'NONE', ( 5.912178883454942900, -10.07894708952944500, 23.01078796092080500 ) ) ; +#1883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1884 = CARTESIAN_POINT ( 'NONE', ( 16.54975406466772700, -12.50000000000000200, -14.35641134322662900 ) ) ; +#1885 = ORIENTED_EDGE ( 'NONE', *, *, #12783, .T. ) ; +#1886 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1342, #10262, #3548, #11389 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001258833537902830100 ), + .UNSPECIFIED. ) ; +#1887 = CARTESIAN_POINT ( 'NONE', ( 13.13720567184952000, -12.43547064471274600, 24.57056081461817200 ) ) ; +#1888 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -89.20772034660431900, 11.03354182248334700 ) ) ; +#1889 = CARTESIAN_POINT ( 'NONE', ( 22.26207532815638100, -19.69127850143644300, 23.28924997438081600 ) ) ; +#1890 = CARTESIAN_POINT ( 'NONE', ( 17.20819594384159100, -12.50000000000003400, 10.12453916518299800 ) ) ; +#1891 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -90.52530319079292600, -3.756600432583203200 ) ) ; +#1892 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -1.200000000000012600 ) ) ; +#1893 = CARTESIAN_POINT ( 'NONE', ( 10.23987505281146900, -30.75778747095311900, 27.62050860635938300 ) ) ; +#1894 = CARTESIAN_POINT ( 'NONE', ( 35.01224087894318200, -31.05427429270760700, 23.91231833477553400 ) ) ; +#1895 = CARTESIAN_POINT ( 'NONE', ( 8.610108262651447600, -12.49999999999975700, 18.37103888589290400 ) ) ; +#1896 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 5.018561128876298100, 20.00000000000000400 ) ) ; +#1897 = ORIENTED_EDGE ( 'NONE', *, *, #13265, .T. ) ; +#1898 = CARTESIAN_POINT ( 'NONE', ( 2.198656615277100100, -18.79505038921538000, 7.990036653850777900 ) ) ; +#1899 = CARTESIAN_POINT ( 'NONE', ( 27.41640404629845000, -11.87724389807648600, 24.55522993379390300 ) ) ; +#1900 = CARTESIAN_POINT ( 'NONE', ( 6.442134499215242700, -30.69755285424832200, 25.73152174971654600 ) ) ; +#1901 = CARTESIAN_POINT ( 'NONE', ( 34.36802460882081100, -10.00000000000273700, 21.07326577383190300 ) ) ; +#1902 = AXIS2_PLACEMENT_3D ( 'NONE', #14301, #7639, #994 ) ; +#1903 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -10.00000000000000200, 10.07020145539087400 ) ) ; +#1904 = CARTESIAN_POINT ( 'NONE', ( 27.55362854606304500, -31.29892962639879200, 28.17288626453056500 ) ) ; +#1905 = CARTESIAN_POINT ( 'NONE', ( 39.76921811593398800, -10.92312753626406200, 10.60244438924718200 ) ) ; +#1906 = CARTESIAN_POINT ( 'NONE', ( 6.033836684541179300, -18.55950989898346400, -22.05737631819816600 ) ) ; +#1907 = CARTESIAN_POINT ( 'NONE', ( 8.517883098745558700, -11.87830413852204400, 22.71894783142186800 ) ) ; +#1908 = CARTESIAN_POINT ( 'NONE', ( 30.65963677228432300, -30.42309170964794500, 27.30224202158891300 ) ) ; +#1909 = CARTESIAN_POINT ( 'NONE', ( 4.327167980219154100, -26.07468731847481200, 14.40608941486324900 ) ) ; +#1910 = CARTESIAN_POINT ( 'NONE', ( 8.341256592526400800, -30.47704446103646700, 26.86440056862626900 ) ) ; +#1911 = CARTESIAN_POINT ( 'NONE', ( 36.04805305567365500, -28.99299373706668700, 22.80645318358653700 ) ) ; +#1912 = VECTOR ( 'NONE', #10663, 1000.000000000000000 ) ; +#1913 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000053700, -90.67527718016657400, -2.935316354444763600 ) ) ; +#1914 = ORIENTED_EDGE ( 'NONE', *, *, #6204, .T. ) ; +#1915 = CARTESIAN_POINT ( 'NONE', ( 4.397497114654109800, -30.27398253176503900, 24.28266361457615800 ) ) ; +#1916 = CARTESIAN_POINT ( 'NONE', ( 5.244115209010507400, -31.07415537202977200, 14.98628702465240700 ) ) ; +#1917 = CARTESIAN_POINT ( 'NONE', ( 9.802537534359741400, -10.92360276670255600, -25.00000000000000000 ) ) ; +#1918 = CARTESIAN_POINT ( 'NONE', ( 29.14468598912629500, -30.81501532443678600, 27.81538640670218500 ) ) ; +#1919 = CARTESIAN_POINT ( 'NONE', ( 37.06869497768438000, -20.09915324866629800, -15.21612257566559700 ) ) ; +#1920 = CARTESIAN_POINT ( 'NONE', ( 24.03263660095986200, -30.69526449499293700, 28.85086649663489000 ) ) ; +#1921 = ADVANCED_FACE ( 'NONE', ( #14201 ), #7336, .F. ) ; +#1922 = CARTESIAN_POINT ( 'NONE', ( 13.88391811981079900, -99.99999999999998600, 21.44949915029522100 ) ) ; +#1923 = CARTESIAN_POINT ( 'NONE', ( 35.21987844018053700, -31.01781957112587000, 23.66433400925156500 ) ) ; +#1924 = CARTESIAN_POINT ( 'NONE', ( 2.722480312808721200, -30.12342321948046100, 21.60461012605298600 ) ) ; +#1925 = FACE_BOUND ( 'NONE', #1823, .T. ) ; +#1926 = CARTESIAN_POINT ( 'NONE', ( 11.19575091714327200, -20.28809933266904900, -22.58422686455083900 ) ) ; +#1927 = CARTESIAN_POINT ( 'NONE', ( 22.37520792494897400, -31.29794767705910300, 28.74459719081738700 ) ) ; +#1928 = CARTESIAN_POINT ( 'NONE', ( 32.50534571088199700, -30.15191525823810500, 26.41847648678755800 ) ) ; +#1929 = EDGE_LOOP ( 'NONE', ( #418, #11614, #3829, #241 ) ) ; +#1930 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 8.981438871123703600, 20.00000000000000400 ) ) ; +#1931 = CARTESIAN_POINT ( 'NONE', ( 9.621503489852820200, -9.957654299110785700, 24.99999999999999600 ) ) ; +#1932 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1933 = CARTESIAN_POINT ( 'NONE', ( 11.71079008431818000, -20.96199614306448900, -22.98522501013001200 ) ) ; +#1934 = CARTESIAN_POINT ( 'NONE', ( -2.511522729740692600, -95.07596123493894400, -3.205230653520471300 ) ) ; +#1935 = AXIS2_PLACEMENT_3D ( 'NONE', #3222, #5436, #13278 ) ; +#1936 = CARTESIAN_POINT ( 'NONE', ( 14.82693538336245900, -16.12174174324804800, 23.92057176173612400 ) ) ; +#1937 = CARTESIAN_POINT ( 'NONE', ( 20.77095205761345700, -31.32859295629771500, 28.73919360125627900 ) ) ; +#1938 = CARTESIAN_POINT ( 'NONE', ( 8.587394978165768600, -95.07596123493894400, 13.87870138358221800 ) ) ; +#1939 = CARTESIAN_POINT ( 'NONE', ( 23.56880052302635800, -19.09656950023017100, 23.39602936521974600 ) ) ; +#1940 = CARTESIAN_POINT ( 'NONE', ( 39.82795725296524100, -7.500000000000000000, 21.30031871613859100 ) ) ; +#1941 = CARTESIAN_POINT ( 'NONE', ( 4.747102199025614600, -16.36238563117234400, -21.30417193392644700 ) ) ; +#1942 = CARTESIAN_POINT ( 'NONE', ( 10.24083688459017700, -30.61509613627669400, 27.63778799266931300 ) ) ; +#1943 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4399, #1131, #4583, #12414, #5699, #13519, #6824, #220, #7970, #1305, #9104, #2401, #10230, #3512, #11359, #4630, #12462, #5746, #13559, #6877 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0004044200204157404500, 0.003170891501429146800, 0.005937362982442552500, 0.008703834463455958200, 0.01147030594446936200, 0.01423677742548276400, 0.01700324890649616800, 0.01838648464700286900, 0.01976972038750956400, 0.02253619186852296200 ), + .UNSPECIFIED. ) ; +#1944 = CARTESIAN_POINT ( 'NONE', ( 35.27950515150191500, -30.06603208743192800, 24.61035228869388200 ) ) ; +#1945 = ORIENTED_EDGE ( 'NONE', *, *, #8240, .F. ) ; +#1946 = CARTESIAN_POINT ( 'NONE', ( 22.43866206969477900, -30.22764236918142800, 26.39475436447733600 ) ) ; +#1947 = CARTESIAN_POINT ( 'NONE', ( 12.24628682730188300, -28.11094004036149100, 26.76234958553333600 ) ) ; +#1948 = CARTESIAN_POINT ( 'NONE', ( 2.397822027525514000, -19.58619010933200900, 7.992129423576947100 ) ) ; +#1949 = CARTESIAN_POINT ( 'NONE', ( 6.522615917989345000, -29.83712152692634900, 25.76579750250517600 ) ) ; +#1950 = CARTESIAN_POINT ( 'NONE', ( 22.49932347176402200, -19.90706702945534800, 23.25319916115345400 ) ) ; +#1951 = ORIENTED_EDGE ( 'NONE', *, *, #12835, .F. ) ; +#1952 = CARTESIAN_POINT ( 'NONE', ( 32.77448950732344500, -9.999999999999996400, 24.77095896913819600 ) ) ; +#1953 = CARTESIAN_POINT ( 'NONE', ( 27.37786135052270700, -33.12290826665309900, 27.89126696756724400 ) ) ; +#1954 = CARTESIAN_POINT ( 'NONE', ( 3.587427012044207300, -28.89245648825204400, 21.94911016500261900 ) ) ; +#1955 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1956 = CARTESIAN_POINT ( 'NONE', ( 10.04541891128712500, -22.30456481549162400, -25.16515492756257500 ) ) ; +#1957 = CARTESIAN_POINT ( 'NONE', ( 5.000000007721785900, -95.07596123493894400, 12.92967538968970900 ) ) ; +#1958 = ORIENTED_EDGE ( 'NONE', *, *, #12701, .F. ) ; +#1959 = CARTESIAN_POINT ( 'NONE', ( 30.67112543154812300, -30.75935539401220700, 27.27025598410076100 ) ) ; +#1960 = CARTESIAN_POINT ( 'NONE', ( 2.559088619486344900, -26.01456659995854200, 8.508417249742230100 ) ) ; +#1961 = CARTESIAN_POINT ( 'NONE', ( 8.469207421316737000, -31.08615978113917000, 26.74080475052536700 ) ) ; +#1962 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2460, #9166, #3578, #11417 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004821107537815091800, 0.007183750393642091200 ), + .UNSPECIFIED. ) ; +#1963 = CARTESIAN_POINT ( 'NONE', ( 36.92080614233135800, -29.95973453029252900, 22.68054763980287400 ) ) ; +#1964 = ORIENTED_EDGE ( 'NONE', *, *, #12471, .T. ) ; +#1965 = CARTESIAN_POINT ( 'NONE', ( 0.1720427470343934000, -7.500000000000000000, 21.30031871613724800 ) ) ; +#1966 = CARTESIAN_POINT ( 'NONE', ( 4.831413593412679400, -29.22676055661403200, 24.08370496261939000 ) ) ; +#1967 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -94.17761894188298300, 15.25983559105857200 ) ) ; +#1968 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 1.200000000000012600 ) ) ; +#1969 = CARTESIAN_POINT ( 'NONE', ( 35.97845228915456800, -21.78617747949466500, -18.60575330828710600 ) ) ; +#1970 = CARTESIAN_POINT ( 'NONE', ( 3.756867239339354300, -97.40634803306925000, 18.37707088525525400 ) ) ; +#1971 = ORIENTED_EDGE ( 'NONE', *, *, #8352, .T. ) ; +#1972 = CARTESIAN_POINT ( 'NONE', ( 34.32105260266948900, -31.13293542123682300, 24.63989032019073000 ) ) ; +#1973 = CARTESIAN_POINT ( 'NONE', ( 3.285802057207794400, -28.99227152849733700, 21.80370183658973500 ) ) ; +#1974 = CARTESIAN_POINT ( 'NONE', ( 16.66663500514976400, -100.0000000000000300, -38.36942826376122200 ) ) ; +#1975 = CARTESIAN_POINT ( 'NONE', ( 32.52726403109695500, -30.80024148744023900, 26.34220528341662200 ) ) ; +#1976 = ORIENTED_EDGE ( 'NONE', *, *, #10444, .T. ) ; +#1977 = CARTESIAN_POINT ( 'NONE', ( 0.05417769931058456800, -10.21671079724228400, 11.18304197224631500 ) ) ; +#1978 = CARTESIAN_POINT ( 'NONE', ( 12.16121270923665100, -12.50000000000000000, -21.74459681704609100 ) ) ; +#1979 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1980 = CARTESIAN_POINT ( 'NONE', ( -1.084202172485494800E-016, -2.499999999999999100, -24.99999999999999600 ) ) ; +#1981 = CARTESIAN_POINT ( 'NONE', ( 6.641039364328214000, -95.07596123493895800, 5.345650428365732200 ) ) ; +#1982 = VERTEX_POINT ( 'NONE', #4193 ) ; +#1983 = CARTESIAN_POINT ( 'NONE', ( 13.31390733989163000, -94.74416957727794400, 18.36583773334766800 ) ) ; +#1984 = CARTESIAN_POINT ( 'NONE', ( 22.57347623597492600, -19.89847195717261700, 23.25457145115146700 ) ) ; +#1985 = CARTESIAN_POINT ( 'NONE', ( 5.009096385106396100, -11.07552010619424400, -25.18964321301354700 ) ) ; +#1986 = CARTESIAN_POINT ( 'NONE', ( 10.44477853237578400, -30.80202764841455500, 27.68360602440211000 ) ) ; +#1987 = CARTESIAN_POINT ( 'NONE', ( 34.93253445054116900, -31.02008700724989200, 24.10613923345165700 ) ) ; +#1988 = ORIENTED_EDGE ( 'NONE', *, *, #6745, .F. ) ; +#1989 = CARTESIAN_POINT ( 'NONE', ( 2.526778197746240500, -28.11394439347264700, 11.72876200534579100 ) ) ; +#1990 = CARTESIAN_POINT ( 'NONE', ( 11.95217333520827600, -20.94040310835405100, -23.13687615181583400 ) ) ; +#1991 = FACE_OUTER_BOUND ( 'NONE', #6538, .T. ) ; +#1992 = EDGE_CURVE ( 'NONE', #4014, #13127, #2684, .T. ) ; +#1993 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1994 = ADVANCED_FACE ( 'NONE', ( #11249 ), #10524, .T. ) ; +#1995 = CARTESIAN_POINT ( 'NONE', ( 2.499741117952578600, -20.39824578298965800, 8.046526422397146700 ) ) ; +#1996 = PLANE ( 'NONE', #206 ) ; +#1997 = CARTESIAN_POINT ( 'NONE', ( 6.696722339939163300, -31.01558879628658300, 25.68882677201811400 ) ) ; +#1998 = CARTESIAN_POINT ( 'NONE', ( 14.93684180784912900, -17.12099276845151900, -26.25562315450782000 ) ) ; +#1999 = VERTEX_POINT ( 'NONE', #6433 ) ; +#2000 = CARTESIAN_POINT ( 'NONE', ( 27.42830783128298900, -31.83008028243264000, 20.32333392403981900 ) ) ; +#2001 = CARTESIAN_POINT ( 'NONE', ( 3.913899898718065500, -28.98205675645639400, 22.72559239421584500 ) ) ; +#2002 = CARTESIAN_POINT ( 'NONE', ( 8.050377550081448100, -99.99999999999995700, 2.274277673961579100 ) ) ; +#2003 = CARTESIAN_POINT ( 'NONE', ( 12.84606104756357100, -20.41211392735324600, -26.09302808069904200 ) ) ; +#2004 = VERTEX_POINT ( 'NONE', #12529 ) ; +#2005 = CARTESIAN_POINT ( 'NONE', ( 30.36134375252961700, -30.47349906262602200, 27.42194812948440900 ) ) ; +#2006 = CYLINDRICAL_SURFACE ( 'NONE', #7696, 2.500000000000000900 ) ; +#2007 = CARTESIAN_POINT ( 'NONE', ( 38.95027496991723100, -14.19890012033100600, 8.005331014629280900 ) ) ; +#2008 = CARTESIAN_POINT ( 'NONE', ( 8.435340400195617100, -30.62300931360047300, 26.89501967869810200 ) ) ; +#2009 = CARTESIAN_POINT ( 'NONE', ( 36.04641140647056800, -30.79525272619977000, 22.48919006714634200 ) ) ; +#2010 = AXIS2_PLACEMENT_3D ( 'NONE', #2327, #10153, #3440 ) ; +#2011 = CARTESIAN_POINT ( 'NONE', ( 23.76981824652181900, -12.50000000000001800, -14.19903780307680600 ) ) ; +#2012 = CARTESIAN_POINT ( 'NONE', ( 4.651472819223232400, -30.59765078776646900, 24.30633964289072300 ) ) ; +#2013 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -94.86315577697733700, 13.79199467519759500 ) ) ; +#2014 = CIRCLE ( 'NONE', #9816, 2.500000000000000900 ) ; +#2015 = CARTESIAN_POINT ( 'NONE', ( 33.62351637044177000, -18.55034175461944200, -22.43893537235442200 ) ) ; +#2016 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -20.76351822333077700, -24.39789867012037700 ) ) ; +#2017 = CARTESIAN_POINT ( 'NONE', ( 28.23262252960157400, -30.89372926213151200, 28.07202507825300600 ) ) ; +#2018 = ORIENTED_EDGE ( 'NONE', *, *, #2544, .F. ) ; +#2019 = CARTESIAN_POINT ( 'NONE', ( 32.41070159531591300, -31.14545854571559900, 26.19396196640709100 ) ) ; +#2020 = AXIS2_PLACEMENT_3D ( 'NONE', #1198, #2283, #10109 ) ; +#2021 = CARTESIAN_POINT ( 'NONE', ( 3.298056804246837900, -30.46638028125693500, 21.60668371277024500 ) ) ; +#2022 = VECTOR ( 'NONE', #13281, 1000.000000000000000 ) ; +#2023 = CARTESIAN_POINT ( 'NONE', ( 13.19273693445088300, -11.35787250351166100, 24.76057044126875400 ) ) ; +#2024 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -94.74682992296695300, 18.71443453778785600 ) ) ; +#2025 = CARTESIAN_POINT ( 'NONE', ( 32.09703230612345900, -30.03390914420176800, 26.60136004692705200 ) ) ; +#2026 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10795, #4489, #3374, #5599, #13428, #6735, #139, #7873, #1223, #9014, #2311, #10137, #3423, #11266 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -2.516185457264721000E-005, 0.002092784865360585100, 0.004210731585293817400, 0.008446625025160296700, 0.01268251846502677800, 0.01480046518496002300, 0.01691841190489326600 ), + .UNSPECIFIED. ) ; +#2027 = VERTEX_POINT ( 'NONE', #13621 ) ; +#2028 = CARTESIAN_POINT ( 'NONE', ( 3.974677516592322900, -21.77815848992349100, -18.50509375807944000 ) ) ; +#2029 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2030 = CARTESIAN_POINT ( 'NONE', ( 16.18394255672183800, -12.50000000000000200, -14.16372751575209000 ) ) ; +#2031 = CARTESIAN_POINT ( 'NONE', ( 13.29279691331374900, -11.25448779615297600, 22.24023342485437700 ) ) ; +#2032 = LINE ( 'NONE', #2493, #1862 ) ; +#2033 = CARTESIAN_POINT ( 'NONE', ( 37.79969912720095200, -18.78239265515037100, -12.74169500385771800 ) ) ; +#2034 = ORIENTED_EDGE ( 'NONE', *, *, #5919, .T. ) ; +#2035 = CARTESIAN_POINT ( 'NONE', ( 7.860228684584204700, -93.14497689657193300, 21.08830651653036300 ) ) ; +#2036 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -22.50000000000000700, -11.97268808056956900 ) ) ; +#2037 = CARTESIAN_POINT ( 'NONE', ( 10.44431058653332700, -30.66886282562138500, 27.70293462576707100 ) ) ; +#2038 = CARTESIAN_POINT ( 'NONE', ( 34.82408441358622000, -29.73969399152114000, 24.81623443669888100 ) ) ; +#2039 = EDGE_LOOP ( 'NONE', ( #11761, #11247, #5414, #8964 ) ) ; +#2040 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#2041 = CARTESIAN_POINT ( 'NONE', ( 5.659348278670133700, -21.94143129659511300, -15.97553098560654300 ) ) ; +#2042 = CARTESIAN_POINT ( 'NONE', ( 2.507294624236583200, -21.19040261374875200, 8.286810506028475100 ) ) ; +#2043 = CARTESIAN_POINT ( 'NONE', ( 7.325165212513503800, -94.72973801205363000, 16.44956712399788800 ) ) ; +#2044 = CARTESIAN_POINT ( 'NONE', ( 6.623084978728508400, -30.22403700391203800, 25.93886631931870600 ) ) ; +#2045 = CARTESIAN_POINT ( 'NONE', ( 14.11786208439691700, -19.93587836250687000, -26.75196343234801300 ) ) ; +#2046 = CIRCLE ( 'NONE', #3064, 2.499999999999998700 ) ; +#2047 = CARTESIAN_POINT ( 'NONE', ( 36.11007753972635500, -7.500000000010552400, 24.90756782493041400 ) ) ; +#2048 = CARTESIAN_POINT ( 'NONE', ( 30.34543924297543800, -38.24630951876942900, 17.78032805003572400 ) ) ; +#2049 = CARTESIAN_POINT ( 'NONE', ( 4.731267149086677100, -29.17349002984709500, 23.92816451269094800 ) ) ; +#2050 = CARTESIAN_POINT ( 'NONE', ( 16.63866765906723800, -18.42909740703613200, -27.32174038952840400 ) ) ; +#2051 = CARTESIAN_POINT ( 'NONE', ( 30.36966655794055500, -30.71102460588088700, 27.40212358351509900 ) ) ; +#2052 = CARTESIAN_POINT ( 'NONE', ( 25.35929828834389000, -20.28809933267076800, -23.98354969063433700 ) ) ; +#2053 = CARTESIAN_POINT ( 'NONE', ( 8.469296882048501700, -30.17252088856158900, 26.90171727866563600 ) ) ; +#2054 = CARTESIAN_POINT ( 'NONE', ( 36.48841121384838700, -29.72551052960651000, 23.19706142921269200 ) ) ; +#2055 = CARTESIAN_POINT ( 'NONE', ( 4.769423575418303900, -29.56819755848020400, 24.37827867525641400 ) ) ; +#2056 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -95.07596123493894400, 11.50239124669685100 ) ) ; +#2057 = CARTESIAN_POINT ( 'NONE', ( 29.82457856680127200, -20.37712410352755700, -24.90052825956453800 ) ) ; +#2058 = CARTESIAN_POINT ( 'NONE', ( 37.48458388924689900, -29.59472963812147500, 21.62984059251696300 ) ) ; +#2059 = ADVANCED_FACE ( 'NONE', ( #9507 ), #6898, .T. ) ; +#2060 = CARTESIAN_POINT ( 'NONE', ( 19.16531159896214800, -39.55226891408876400, 19.78913764929430400 ) ) ; +#2061 = ORIENTED_EDGE ( 'NONE', *, *, #3494, .T. ) ; +#2062 = CARTESIAN_POINT ( 'NONE', ( 31.16957734130046700, -31.05709111435812300, 26.93751383944538000 ) ) ; +#2063 = CARTESIAN_POINT ( 'NONE', ( 2.732380513521166500, -29.32995566773770300, 21.80764456052587300 ) ) ; +#2064 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #8177, #13666, #2601 ), + ( #10426, #3715, #11557 ), + ( #4819, #12657, #5951 ), + ( #13759, #7079, #462 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0001256340864446184000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882853900, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989240004800, 1.000000000000000000), + ( 1.000000000000000000, 0.7941588266965199400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941476793044257600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2065 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#2066 = CARTESIAN_POINT ( 'NONE', ( 32.15375038112851100, -30.63862898619502000, 26.60160208332465000 ) ) ; +#2067 = CARTESIAN_POINT ( 'NONE', ( 13.52336970605900000, -22.42222600774434600, -26.68082746443226600 ) ) ; +#2068 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9464545609416071800, -0.3228370549872325900 ) ) ; +#2069 = CARTESIAN_POINT ( 'NONE', ( 10.51461213704512300, -21.06135709415032400, -22.27686906360118600 ) ) ; +#2070 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669238400, 0.9848077530122091300 ) ) ; +#2071 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999964100, -19.87270537885228100, 23.25917566912282200 ) ) ; +#2072 = CARTESIAN_POINT ( 'NONE', ( 5.874291367759979300, -97.45025329603419100, 19.48230279082877900 ) ) ; +#2073 = CARTESIAN_POINT ( 'NONE', ( 38.94993749236396500, -11.56244887397076600, -16.37141180052723400 ) ) ; +#2074 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2075 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 8.981438871123701900, -19.99999999999999600 ) ) ; +#2076 = CARTESIAN_POINT ( 'NONE', ( 10.75214061293207200, -30.84217839223441300, 27.77704758680292900 ) ) ; +#2077 = CARTESIAN_POINT ( 'NONE', ( 34.82411229840433700, -30.78018848545276100, 24.63275933660179000 ) ) ; +#2078 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999997900, 8.699416875992930900, -20.22352373746557700 ) ) ; +#2079 = CARTESIAN_POINT ( 'NONE', ( 33.91676201105666900, -30.67412563331490800, 25.48144512266287600 ) ) ; +#2080 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2081 = CARTESIAN_POINT ( 'NONE', ( 2.249145355085972100, -18.82225679152199800, 9.115800329302127000 ) ) ; +#2082 = CARTESIAN_POINT ( 'NONE', ( 6.835440407252539400, -31.16708074200629100, 25.65000348451521400 ) ) ; +#2083 = CARTESIAN_POINT ( 'NONE', ( 16.49485296279531000, -22.13223173741335600, -27.13923979151346100 ) ) ; +#2084 = LINE ( 'NONE', #7553, #5707 ) ; +#2085 = CARTESIAN_POINT ( 'NONE', ( 36.10374529170110900, -30.81666262191392700, 22.21904940089170600 ) ) ; +#2086 = CARTESIAN_POINT ( 'NONE', ( 6.480020406529593700, -29.62412374442977400, 25.63426289450944000 ) ) ; +#2087 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, -7.511547099454124200, 20.00000000000000000 ) ) ; +#2088 = EDGE_LOOP ( 'NONE', ( #3876, #3175, #956, #11939 ) ) ; +#2089 = CARTESIAN_POINT ( 'NONE', ( 22.34990674714293500, -28.77556518705056400, 29.18936127947247500 ) ) ; +#2090 = CARTESIAN_POINT ( 'NONE', ( 37.49994938246002400, -21.22957878894349900, 7.839034712721836100 ) ) ; +#2091 = CARTESIAN_POINT ( 'NONE', ( 30.36176855832844600, -30.97496316135654500, 27.33463968762032800 ) ) ; +#2092 = CARTESIAN_POINT ( 'NONE', ( 29.82171378888968900, -100.0000000000000300, -35.96519623375461800 ) ) ; +#2093 = CARTESIAN_POINT ( 'NONE', ( 8.633813560437975100, -30.74437572446075300, 26.96408783956658400 ) ) ; +#2094 = CARTESIAN_POINT ( 'NONE', ( 35.97304304143277400, -30.77783769932351300, 22.90063258179572300 ) ) ; +#2095 = AXIS2_PLACEMENT_3D ( 'NONE', #11063, #4338, #12173 ) ; +#2096 = LINE ( 'NONE', #2040, #10657 ) ; +#2097 = CARTESIAN_POINT ( 'NONE', ( 5.013470540291324400, -30.95414167077777600, 24.17025159248556000 ) ) ; +#2098 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.3227915468451914000, -0.9464700826150230800 ) ) ; +#2099 = ORIENTED_EDGE ( 'NONE', *, *, #985, .T. ) ; +#2100 = CARTESIAN_POINT ( 'NONE', ( 27.24736328328809900, -22.40167685851210800, -26.41254956594962500 ) ) ; +#2101 = CARTESIAN_POINT ( 'NONE', ( 34.54534784932294400, -31.44408489951672100, 22.94419078092632300 ) ) ; +#2102 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -95.07596123493894400, 16.93034213569669800 ) ) ; +#2103 = CARTESIAN_POINT ( 'NONE', ( 3.600436015296230300, -30.60702069011919900, 21.70062124801588500 ) ) ; +#2104 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997200, -94.58996440013440600, 19.12511856848663800 ) ) ; +#2105 = CARTESIAN_POINT ( 'NONE', ( 32.09418413078622500, -31.12830203543071800, 26.40303001074527600 ) ) ; +#2106 = CARTESIAN_POINT ( 'NONE', ( 29.60166731588320800, -10.90277507787899600, -25.04283439009023800 ) ) ; +#2107 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, 9.500000000000000000, 20.00000000000000400 ) ) ; +#2108 = CARTESIAN_POINT ( 'NONE', ( 10.50609748628127500, -12.50000000000171100, -20.81229276793990800 ) ) ; +#2109 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #179, #10034, #7918 ), + ( #1259, #9053, #2354 ), + ( #10181, #3463, #11312 ), + ( #4578, #12410, #5693 ), + ( #13512, #6819, #217 ), + ( #7966, #1302, #9099 ), + ( #2398, #10225, #3507 ), + ( #11352, #4626, #12455 ), + ( #5741, #13553, #6870 ), + ( #259, #8012, #1355 ), + ( #9145, #2440, #10270 ), + ( #3559, #11400, #4669 ), + ( #12510, #5794, #13604 ), + ( #6918, #312, #8063 ), + ( #1401, #9198, #2494 ), + ( #10310, #3608, #11451 ), + ( #4713, #12551, #5846 ), + ( #13652, #6965, #357 ), + ( #8114, #1445, #9243 ), + ( #2542, #10359, #3650 ), + ( #11495, #4763, #12597 ), + ( #5890, #13705, #7017 ), + ( #403, #8166, #1500 ), + ( #9290, #2590, #10412 ), + ( #3701, #11546, #4809 ), + ( #12644, #5937, #13747 ), + ( #7069, #449, #8217 ), + ( #1547, #9340, #2635 ), + ( #10462, #3751, #11592 ), + ( #4855, #12695, #5989 ), + ( #13794, #7114, #503 ), + ( #8264, #1590, #9387 ), + ( #2683, #10512, #2252 ), + ( #10079, #3360, #11206 ), + ( #4478, #12312, #5586 ), + ( #13414, #6722, #124 ), + ( #7861, #1212, #9001 ), + ( #2299, #10125, #3411 ), + ( #11253, #4525, #12356 ), + ( #5637, #13459, #6768 ), + ( #171, #7909, #1251 ), + ( #9045, #2345, #10171 ), + ( #3454, #11302, #4567 ), + ( #12400, #5685, #13503 ), + ( #6811, #210, #7958 ), + ( #1291, #9090, #2390 ), + ( #10218, #3498, #11343 ), + ( #4616, #12445, #5731 ), + ( #13545, #6860, #250 ), + ( #8002, #1345, #9137 ), + ( #2431, #10263, #3550 ), + ( #11390, #4659, #12500 ), + ( #5784, #13593, #6908 ), + ( #302, #8053, #1391 ), + ( #9189, #2484, #10301 ), + ( #3598, #11442, #4704 ), + ( #12542, #5836, #13643 ), + ( #6956, #348, #8104 ), + ( #1436, #9233, #2533 ), + ( #10349, #3639, #11488 ), + ( #4754, #12588, #5879 ), + ( #13695, #7008, #394 ), + ( #8157, #1491, #9282 ), + ( #2580, #10402, #3691 ), + ( #11537, #4801, #12635 ), + ( #5927, #13738, #7060 ), + ( #439, #8208, #1538 ), + ( #9331, #2625, #10451 ), + ( #3742, #11581, #4844 ), + ( #12686, #5980, #13783 ), + ( #7104, #491, #8255 ), + ( #1579, #9377, #2674 ), + ( #10501, #3787, #11629 ), + ( #4890, #12731, #6028 ), + ( #13835, #7153, #537 ), + ( #8308, #1626, #9421 ), + ( #2727, #10557, #3833 ), + ( #11676, #4941, #12780 ), + ( #6069, #13881, #7198 ), + ( #577, #8351, #1676 ), + ( #9471, #2771, #10609 ), + ( #3890, #11724, #4990 ), + ( #12834, #6119, #13926 ), + ( #7250, #626, #8401 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.578598363138894500E-016, 0.0002478943548998164800, 0.0004957887097994751000, 0.0005112821069807037600, 0.0005267755041619324100, 0.0005577622985243897300, 0.0006197358872493043600, 0.0007436830646991337200, 0.0007746698590615911400, 0.0008056566534240484600, 0.0008676302421489630800, 0.0009915774195987923400, 0.001115524597048621600, 0.001239471774498450900, 0.001363418951948280100, 0.001487366129398109600, 0.001611313306847939100, 0.001735260484297768300, 0.001983154839197426800, 0.002231049194097085300, 0.002262035988459542400, 0.002293022782822000000, 0.002354996371546914600, 0.002478943548996743800, 0.002509930343359200900, 0.002540917137721658500, 0.002602890726446573100, 0.002726837903896402400, 0.002974732258796061300, 0.002990225655977289800, 0.003005719053158518800, 0.003036705847520975900, 0.003098679436245891000, 0.003222626613695720200, 0.003253613408058177300, 0.003284600202420634900, 0.003346573791145549500, 0.003470520968595378800, 0.003532494557320293400, 0.003594468146045208000, 0.003718415323495037300, 0.003966309678394695800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865486800, 1.000000000000000000), + ( 1.000000000000000000, 0.7089840992183842300, 1.000000000000000000), + ( 1.000000000000000000, 0.7109697136181216700, 1.000000000000000000), + ( 1.000000000000000000, 0.7149042148801607600, 1.000000000000000000), + ( 1.000000000000000000, 0.7168451049983917100, 1.000000000000000000), + ( 1.000000000000000000, 0.7187618163989691900, 1.000000000000000000), + ( 1.000000000000000000, 0.7188731175913765100, 1.000000000000000000), + ( 1.000000000000000000, 0.7191193789052867700, 1.000000000000000000), + ( 1.000000000000000000, 0.7192411559610223400, 1.000000000000000000), + ( 1.000000000000000000, 0.7196031001053245800, 1.000000000000000000), + ( 1.000000000000000000, 0.7198398945968962300, 1.000000000000000000), + ( 1.000000000000000000, 0.7205411869190628800, 1.000000000000000000), + ( 1.000000000000000000, 0.7209966869817332500, 1.000000000000000000), + ( 1.000000000000000000, 0.7223543498289245500, 1.000000000000000000), + ( 1.000000000000000000, 0.7232448545481027200, 1.000000000000000000), + ( 1.000000000000000000, 0.7244331009029035800, 1.000000000000000000), + ( 1.000000000000000000, 0.7246701162655365700, 1.000000000000000000), + ( 1.000000000000000000, 0.7251246141876172000, 1.000000000000000000), + ( 1.000000000000000000, 0.7253524216860255400, 1.000000000000000000), + ( 1.000000000000000000, 0.7260368195633462000, 1.000000000000000000), + ( 1.000000000000000000, 0.7264943930899787600, 1.000000000000000000), + ( 1.000000000000000000, 0.7278650797043192400, 1.000000000000000000), + ( 1.000000000000000000, 0.7287721029553195800, 1.000000000000000000), + ( 1.000000000000000000, 0.7305322808707270800, 1.000000000000000000), + ( 1.000000000000000000, 0.7314021036222283500, 1.000000000000000000), + ( 1.000000000000000000, 0.7331364708418489600, 1.000000000000000000), + ( 1.000000000000000000, 0.7339938697555492600, 1.000000000000000000), + ( 1.000000000000000000, 0.7356611424452563800, 1.000000000000000000), + ( 1.000000000000000000, 0.7365008307182267000, 1.000000000000000000), + ( 1.000000000000000000, 0.7381196012344802800, 1.000000000000000000), + ( 1.000000000000000000, 0.7389141352518552300, 1.000000000000000000), + ( 1.000000000000000000, 0.7405136790001151100, 1.000000000000000000), + ( 1.000000000000000000, 0.7412539284454118200, 1.000000000000000000), + ( 1.000000000000000000, 0.7427905052884238300, 1.000000000000000000), + ( 1.000000000000000000, 0.7435641804929765700, 1.000000000000000000), + ( 1.000000000000000000, 0.7458579192573606700, 1.000000000000000000), + ( 1.000000000000000000, 0.7473297682831392400, 1.000000000000000000), + ( 1.000000000000000000, 0.7499534107082694900, 1.000000000000000000), + ( 1.000000000000000000, 0.7512829589940383000, 1.000000000000000000), + ( 1.000000000000000000, 0.7526465346088001600, 1.000000000000000000), + ( 1.000000000000000000, 0.7527926035972567500, 1.000000000000000000), + ( 1.000000000000000000, 0.7531076195014734200, 1.000000000000000000), + ( 1.000000000000000000, 0.7532607020007440200, 1.000000000000000000), + ( 1.000000000000000000, 0.7537102251818398300, 1.000000000000000000), + ( 1.000000000000000000, 0.7539970600770643500, 1.000000000000000000), + ( 1.000000000000000000, 0.7548388845072785400, 1.000000000000000000), + ( 1.000000000000000000, 0.7553742329628653200, 1.000000000000000000), + ( 1.000000000000000000, 0.7560650693945776300, 1.000000000000000000), + ( 1.000000000000000000, 0.7562117223506178400, 1.000000000000000000), + ( 1.000000000000000000, 0.7564655085368498000, 1.000000000000000000), + ( 1.000000000000000000, 0.7565924392685309300, 1.000000000000000000), + ( 1.000000000000000000, 0.7569729189592205900, 1.000000000000000000), + ( 1.000000000000000000, 0.7572261664692135900, 1.000000000000000000), + ( 1.000000000000000000, 0.7579808721529841500, 1.000000000000000000), + ( 1.000000000000000000, 0.7584771412650052100, 1.000000000000000000), + ( 1.000000000000000000, 0.7598955874707259400, 1.000000000000000000), + ( 1.000000000000000000, 0.7607475290959739800, 1.000000000000000000), + ( 1.000000000000000000, 0.7615099745839969400, 1.000000000000000000), + ( 1.000000000000000000, 0.7615543259563203300, 1.000000000000000000), + ( 1.000000000000000000, 0.7616420327500460500, 1.000000000000000000), + ( 1.000000000000000000, 0.7616929452661895800, 1.000000000000000000), + ( 1.000000000000000000, 0.7618351570092344300, 1.000000000000000000), + ( 1.000000000000000000, 0.7619261907715172400, 1.000000000000000000), + ( 1.000000000000000000, 0.7621909353039378900, 1.000000000000000000), + ( 1.000000000000000000, 0.7623564087365992700, 1.000000000000000000), + ( 1.000000000000000000, 0.7628347179567908100, 1.000000000000000000), + ( 1.000000000000000000, 0.7631290253186038300, 1.000000000000000000), + ( 1.000000000000000000, 0.7635001196601962600, 1.000000000000000000), + ( 1.000000000000000000, 0.7635732069067923100, 1.000000000000000000), + ( 1.000000000000000000, 0.7637089741148687100, 1.000000000000000000), + ( 1.000000000000000000, 0.7637757766003898700, 1.000000000000000000), + ( 1.000000000000000000, 0.7639726082045823500, 1.000000000000000000), + ( 1.000000000000000000, 0.7640990518785543100, 1.000000000000000000), + ( 1.000000000000000000, 0.7644616772358715500, 1.000000000000000000), + ( 1.000000000000000000, 0.7646808927794634900, 1.000000000000000000), + ( 1.000000000000000000, 0.7649701788467233600, 1.000000000000000000), + ( 1.000000000000000000, 0.7650563498105571500, 1.000000000000000000), + ( 1.000000000000000000, 0.7652237154410346200, 1.000000000000000000), + ( 1.000000000000000000, 0.7653028185289036900, 1.000000000000000000), + ( 1.000000000000000000, 0.7655241285783936900, 1.000000000000000000), + ( 1.000000000000000000, 0.7656501128818484800, 1.000000000000000000), + ( 1.000000000000000000, 0.7659508514821556900, 1.000000000000000000), + ( 1.000000000000000000, 0.7660462228234507000, 1.000000000000000000), + ( 1.000000000000000000, 0.7660444431189756800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2110 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -99.99999999999998600, -40.86942826376123600 ) ) ; +#2111 = EDGE_LOOP ( 'NONE', ( #2825, #8006, #8791, #9779 ) ) ; +#2112 = ORIENTED_EDGE ( 'NONE', *, *, #13060, .F. ) ; +#2113 = PLANE ( 'NONE', #4328 ) ; +#2114 = CARTESIAN_POINT ( 'NONE', ( 10.75213903022005200, -30.75687424890065800, 27.79208840795311300 ) ) ; +#2115 = CARTESIAN_POINT ( 'NONE', ( 34.49685461477991300, -29.44007499876110900, 24.83984187688574600 ) ) ; +#2116 = CARTESIAN_POINT ( 'NONE', ( 24.22187713986574300, -12.49999999999973700, 21.94299589603195600 ) ) ; +#2117 = CARTESIAN_POINT ( 'NONE', ( 33.66814083611451700, -29.58662325622981700, 25.51740354844970000 ) ) ; +#2118 = DIRECTION ( 'NONE', ( 0.06029729647167301300, -0.9981804626610395500, 0.0000000000000000000 ) ) ; +#2119 = DIRECTION ( 'NONE', ( -8.326672684688674100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2120 = ADVANCED_FACE ( 'NONE', ( #7018 ), #7607, .T. ) ; +#2121 = ORIENTED_EDGE ( 'NONE', *, *, #10629, .F. ) ; +#2122 = CARTESIAN_POINT ( 'NONE', ( 2.575800442066368900, -19.56322749879301200, 10.35195607892050900 ) ) ; +#2123 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002800, -9.878887755046163100, 20.09899844734905700 ) ) ; +#2124 = CARTESIAN_POINT ( 'NONE', ( 6.696707364206449000, -30.45073559251613200, 25.98692435574404800 ) ) ; +#2125 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6627, #10394, #433, #8201, #1533, #9326 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( -2.711215801461606100E-005, 0.0006338531729925217600, 0.001294818503999659600 ), + .UNSPECIFIED. ) ; +#2126 = CARTESIAN_POINT ( 'NONE', ( 34.14158501001666900, -31.22753124919248400, 15.77685882675642800 ) ) ; +#2127 = CARTESIAN_POINT ( 'NONE', ( 8.801083181280899800, -30.26010530740892400, 27.06296375994251200 ) ) ; +#2128 = ORIENTED_EDGE ( 'NONE', *, *, #9249, .F. ) ; +#2129 = AXIS2_PLACEMENT_3D ( 'NONE', #16, #1100, #8888 ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -10.73517738471623100, 9.570445276209808200 ) ) ; +#2131 = CARTESIAN_POINT ( 'NONE', ( 37.50062168480949500, -20.40478062937498600, 7.907347066404436300 ) ) ; +#2132 = CARTESIAN_POINT ( 'NONE', ( 30.16601640660531900, -30.65691327559387200, 27.48673604388828900 ) ) ; +#2133 = CARTESIAN_POINT ( 'NONE', ( 33.35350530012105000, -20.28809933267076800, -17.91177776866276600 ) ) ; +#2134 = CARTESIAN_POINT ( 'NONE', ( 8.652909935209908800, -30.29347136242169800, 27.00146057763403800 ) ) ; +#2135 = CARTESIAN_POINT ( 'NONE', ( 36.00589984885019800, -29.34322615875195700, 23.41583194282304000 ) ) ; +#2136 = EDGE_LOOP ( 'NONE', ( #10603, #7675, #10305, #6826 ) ) ; +#2137 = CARTESIAN_POINT ( 'NONE', ( 4.730090527790876500, -30.02457863626621700, 24.60807196792792700 ) ) ; +#2138 = ORIENTED_EDGE ( 'NONE', *, *, #6178, .F. ) ; +#2139 = FACE_OUTER_BOUND ( 'NONE', #2039, .T. ) ; +#2140 = CARTESIAN_POINT ( 'NONE', ( 22.35599504134094000, -18.42946738658184800, -27.31212426322410600 ) ) ; +#2141 = CARTESIAN_POINT ( 'NONE', ( 37.79839571336986400, -18.80694826461790100, -11.70378783570188700 ) ) ; +#2142 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -94.96381121975215900, 18.14636354334062000 ) ) ; +#2143 = CARTESIAN_POINT ( 'NONE', ( 2.536608687136352000, -29.69240527661621700, 21.85384004651288600 ) ) ; +#2144 = CARTESIAN_POINT ( 'NONE', ( 25.66085077057393700, -14.87378540723998700, 24.14062013452041500 ) ) ; +#2145 = ORIENTED_EDGE ( 'NONE', *, *, #4719, .F. ) ; +#2146 = CARTESIAN_POINT ( 'NONE', ( 31.95625143210558500, -30.52215545689760000, 26.71848181967401500 ) ) ; +#2147 = CARTESIAN_POINT ( 'NONE', ( 38.25641327587604900, -10.03612307131396400, -19.20994958630210200 ) ) ; +#2148 = CARTESIAN_POINT ( 'NONE', ( 28.94022422062730400, -30.78692346878482100, 27.88359221272684600 ) ) ; +#2149 = CARTESIAN_POINT ( 'NONE', ( 29.37961229115187600, -9.904003851098931200, 24.41710642747849000 ) ) ; +#2150 = CARTESIAN_POINT ( 'NONE', ( 5.792229159114267400, -23.10950001919169200, 11.93670816075454000 ) ) ; +#2151 = CARTESIAN_POINT ( 'NONE', ( 15.77752123455455900, -12.50000000000000000, -13.84046502431072900 ) ) ; +#2152 = CARTESIAN_POINT ( 'NONE', ( 2.858001470927043400, -26.50214246161070600, 6.766932290923035600 ) ) ; +#2153 = ORIENTED_EDGE ( 'NONE', *, *, #3290, .T. ) ; +#2154 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2155 = VECTOR ( 'NONE', #6917, 1000.000000000000000 ) ; +#2156 = CARTESIAN_POINT ( 'NONE', ( 36.84821652203636700, -30.17368738019602500, 20.32174790664634400 ) ) ; +#2157 = ORIENTED_EDGE ( 'NONE', *, *, #10538, .T. ) ; +#2158 = AXIS2_PLACEMENT_3D ( 'NONE', #5345, #13185, #6475 ) ; +#2159 = CARTESIAN_POINT ( 'NONE', ( 37.79839571336985000, -18.80694826461787600, -11.70378783570194000 ) ) ; +#2160 = CARTESIAN_POINT ( 'NONE', ( 34.76498492306001300, -30.46469930777085400, 24.95529728758224800 ) ) ; +#2161 = CARTESIAN_POINT ( 'NONE', ( 22.95371910334190300, -12.50000000000002100, 10.09892772514905000 ) ) ; +#2162 = CARTESIAN_POINT ( 'NONE', ( 33.85016871484710100, -30.45323512269288500, 25.61665855703424200 ) ) ; +#2163 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999992200, -7.520606794341288600, 24.99999999999999600 ) ) ; +#2164 = VECTOR ( 'NONE', #3307, 1000.000000000000000 ) ; +#2165 = EDGE_CURVE ( 'NONE', #4437, #3039, #9422, .T. ) ; +#2166 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 8.200000000000013500, 0.0000000000000000000 ) ) ; +#2167 = ORIENTED_EDGE ( 'NONE', *, *, #10647, .F. ) ; +#2168 = CARTESIAN_POINT ( 'NONE', ( 2.976135791324417300, -20.22387475091172600, 11.80778158341883700 ) ) ; +#2169 = VECTOR ( 'NONE', #3700, 999.9999999999998900 ) ; +#2170 = CARTESIAN_POINT ( 'NONE', ( 6.835798395810887700, -29.72290738785564200, 25.90411438227937400 ) ) ; +#2171 = CARTESIAN_POINT ( 'NONE', ( 2.015497905913721700, -11.89736398432790300, -18.74592009292174000 ) ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( 36.35502347133221000, -32.95551158045649500, 11.57644568113683700 ) ) ; +#2173 = CARTESIAN_POINT ( 'NONE', ( 10.01339777155645000, -30.56235596226769900, 27.55818365733275900 ) ) ; +#2174 = CARTESIAN_POINT ( 'NONE', ( 24.22538087266966000, -19.94197182129004300, 23.15149927018272900 ) ) ; +#2175 = ORIENTED_EDGE ( 'NONE', *, *, #8997, .F. ) ; +#2176 = CARTESIAN_POINT ( 'NONE', ( 39.09666587281309800, -10.66094883513361100, 14.42012312402637200 ) ) ; +#2177 = CARTESIAN_POINT ( 'NONE', ( 37.60230580430779700, -19.58659415020319000, 7.957911786198493200 ) ) ; +#2178 = CARTESIAN_POINT ( 'NONE', ( 30.16470339026507100, -30.88418346904027700, 27.44246801549787300 ) ) ; +#2179 = CARTESIAN_POINT ( 'NONE', ( 34.92055594107598900, -100.0000000000000300, -27.29398733170707900 ) ) ; +#2180 = CARTESIAN_POINT ( 'NONE', ( 8.742590535333432600, -30.92566777523285600, 26.95573034333975600 ) ) ; +#2181 = CARTESIAN_POINT ( 'NONE', ( 36.18750329287409100, -30.47205462806240200, 23.27851960833235600 ) ) ; +#2182 = FACE_OUTER_BOUND ( 'NONE', #6088, .T. ) ; +#2183 = VERTEX_POINT ( 'NONE', #6055 ) ; +#2184 = CARTESIAN_POINT ( 'NONE', ( 27.41640404629845000, -11.87724389807648600, 24.55522993379390300 ) ) ; +#2185 = CARTESIAN_POINT ( 'NONE', ( 26.45942384540780900, -20.03890148772324800, 22.69747043191249600 ) ) ; +#2186 = CARTESIAN_POINT ( 'NONE', ( 5.385942695035173400, -31.10577705653194200, 24.34963832722584700 ) ) ; +#2187 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10833, #11937, #8623 ), + ( #1937, #9754, #3041 ), + ( #10886, #4150, #11990 ), + ( #5258, #13100, #6395 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -8.673617379884035500E-019, 0.004625614886216255000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882851700, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882851700, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882851700, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882851700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2188 = ORIENTED_EDGE ( 'NONE', *, *, #3392, .F. ) ; +#2189 = CARTESIAN_POINT ( 'NONE', ( 12.94141468569282000, -13.07463790904922100, -25.54214161927439600 ) ) ; +#2190 = ADVANCED_FACE ( 'NONE', ( #10979 ), #1311, .T. ) ; +#2191 = CARTESIAN_POINT ( 'NONE', ( 17.64039441766889400, -33.35446909076586800, 26.50697697917620100 ) ) ; +#2192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2193 = CARTESIAN_POINT ( 'NONE', ( 3.602200954035355000, -28.89903455482287600, 22.00210151696066800 ) ) ; +#2194 = TOROIDAL_SURFACE ( 'NONE', #9860, 2.500000000000000000, 2.500000000000000000 ) ; +#2195 = EDGE_LOOP ( 'NONE', ( #11043, #12491, #7588, #10537 ) ) ; +#2196 = CARTESIAN_POINT ( 'NONE', ( 22.99388231347202800, -22.30068934425816000, -27.16247253334634900 ) ) ; +#2197 = CARTESIAN_POINT ( 'NONE', ( 31.91458931380483600, -31.08075226869647200, 26.53749606831657500 ) ) ; +#2198 = CARTESIAN_POINT ( 'NONE', ( 34.20866556460311600, -10.20226130495214200, -24.99999999999999300 ) ) ; +#2199 = CARTESIAN_POINT ( 'NONE', ( 28.93940148364949700, -30.81377907071014700, 27.87929434657690900 ) ) ; +#2200 = CARTESIAN_POINT ( 'NONE', ( 21.12696582476269200, -10.00000000000000200, 25.72051784877827500 ) ) ; +#2201 = CARTESIAN_POINT ( 'NONE', ( 15.85267741861425600, -24.22503127684297700, 19.90873173438673400 ) ) ; +#2202 = CARTESIAN_POINT ( 'NONE', ( 7.613312946506748200, -21.43904342004281800, -19.57853271364451700 ) ) ; +#2203 = CARTESIAN_POINT ( 'NONE', ( 1.673612652581358600, -10.10706017083134100, -19.04532335502810300 ) ) ; +#2204 = VERTEX_POINT ( 'NONE', #12763 ) ; +#2205 = CARTESIAN_POINT ( 'NONE', ( 4.108907488405464800, -30.83204644309639200, 22.87254784675798200 ) ) ; +#2206 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2056, #14181, #958, #3166 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 5.608053774242554500, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9623757713646634600, 0.9623757713646634600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2207 = VECTOR ( 'NONE', #2439, 1000.000000000000000 ) ; +#2208 = CARTESIAN_POINT ( 'NONE', ( 37.49939029071701700, -27.24997130928265700, 7.531355035450960900 ) ) ; +#2209 = CARTESIAN_POINT ( 'NONE', ( 16.39208858415091200, -39.48871152069521200, 19.80034453257308900 ) ) ; +#2210 = CARTESIAN_POINT ( 'NONE', ( 34.15123506265286600, -29.45479788583401500, 25.10323605656732900 ) ) ; +#2211 = CARTESIAN_POINT ( 'NONE', ( 26.62392783098099300, -24.13888528833032500, 19.29608243775711100 ) ) ; +#2212 = CARTESIAN_POINT ( 'NONE', ( 33.66768210042779700, -31.16486668701072200, 25.23848297716368800 ) ) ; +#2213 = CARTESIAN_POINT ( 'NONE', ( 15.07814203457366800, -12.49999999999999300, -12.63319474826633900 ) ) ; +#2214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2215 = ORIENTED_EDGE ( 'NONE', *, *, #13326, .F. ) ; +#2216 = CARTESIAN_POINT ( 'NONE', ( 3.458122992601316600, -20.78165490618111000, 13.24741121993363000 ) ) ; +#2217 = CARTESIAN_POINT ( 'NONE', ( 6.889798219557382800, -30.64405358195402600, 26.05946176941632700 ) ) ; +#2218 = CARTESIAN_POINT ( 'NONE', ( 2.019141910660052200E-013, -10.00000000000017900, -14.29962114366259700 ) ) ; +#2219 = CARTESIAN_POINT ( 'NONE', ( 37.49493893041228900, -27.63065482122754800, 9.396694007200570900 ) ) ; +#2220 = CARTESIAN_POINT ( 'NONE', ( 25.35929828834389000, -100.0000000000000100, -38.03890846183703900 ) ) ; +#2221 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -7.511547099454120700, 20.00000000000003600 ) ) ; +#2222 = CARTESIAN_POINT ( 'NONE', ( 37.80128716206095900, -18.79511660473999500, 7.996603679148776700 ) ) ; +#2223 = CARTESIAN_POINT ( 'NONE', ( 29.75927784178457400, -30.64061016790960300, 27.63574761415245700 ) ) ; +#2224 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2225 = CARTESIAN_POINT ( 'NONE', ( 8.735806897349741400, -30.49923373919261100, 27.04602584885746800 ) ) ; +#2226 = CARTESIAN_POINT ( 'NONE', ( 35.53886654278161200, -29.13564006780333000, 23.61948226745531100 ) ) ; +#2227 = ORIENTED_EDGE ( 'NONE', *, *, #11230, .F. ) ; +#2228 = CARTESIAN_POINT ( 'NONE', ( 2.201425001453305900, -18.80570000581308300, -11.53187062879840900 ) ) ; +#2229 = CARTESIAN_POINT ( 'NONE', ( 33.80995556381184700, -21.16856967485932400, 17.84498898857664200 ) ) ; +#2230 = CARTESIAN_POINT ( 'NONE', ( 5.035840076372109000, -30.32630312975439700, 24.85627647934531800 ) ) ; +#2231 = CARTESIAN_POINT ( 'NONE', ( 1.003813027908995600, -10.00000000000000000, -21.92993261894519500 ) ) ; +#2232 = CARTESIAN_POINT ( 'NONE', ( 23.61422868171717900, -95.07596123493897300, 16.93028935686360000 ) ) ; +#2233 = CARTESIAN_POINT ( 'NONE', ( 6.006143116333828600, -31.61666448941052800, 23.26783839800552700 ) ) ; +#2234 = CARTESIAN_POINT ( 'NONE', ( 38.27339572549612300, -10.05375953237827400, -19.17028665471516300 ) ) ; +#2235 = CARTESIAN_POINT ( 'NONE', ( 2.661178553732471900, -30.03640900109720800, 21.84735176611501100 ) ) ; +#2236 = CIRCLE ( 'NONE', #5654, 5.000000000000000900 ) ; +#2237 = CARTESIAN_POINT ( 'NONE', ( 33.23664003695829900, -18.54088238239223000, -22.82935076965022600 ) ) ; +#2238 = CARTESIAN_POINT ( 'NONE', ( 31.64982837386756000, -30.35921444137044400, 26.86736016121910400 ) ) ; +#2239 = VECTOR ( 'NONE', #11921, 1000.000000000000000 ) ; +#2240 = CARTESIAN_POINT ( 'NONE', ( 0.3226449443118326000, -11.29057977724726300, 9.738761650130676600 ) ) ; +#2241 = CARTESIAN_POINT ( 'NONE', ( 28.94018623309378000, -30.84451426194828400, 27.87345952539835300 ) ) ; +#2242 = CARTESIAN_POINT ( 'NONE', ( 36.71399826464806200, -28.99224471429238300, 21.80408033352473800 ) ) ; +#2243 = EDGE_LOOP ( 'NONE', ( #4360, #11963, #647, #2215 ) ) ; +#2244 = CARTESIAN_POINT ( 'NONE', ( 39.01524947709934600, -10.00000000000000400, 14.00777355208056800 ) ) ; +#2245 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, 1.368992230496410400, -7.763940748012489100 ) ) ; +#2246 = CARTESIAN_POINT ( 'NONE', ( 7.517058597310714200, -12.49999999999999300, -18.00372473864238300 ) ) ; +#2247 = CARTESIAN_POINT ( 'NONE', ( 17.59604722621880100, -27.96340406021231900, 27.45756719881665800 ) ) ; +#2248 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.008942284912153700, 16.57432766877375800 ) ) ; +#2249 = CARTESIAN_POINT ( 'NONE', ( 3.489174056160748700, -29.77362262877303300, 23.19169332441557100 ) ) ; +#2250 = CIRCLE ( 'NONE', #1657, 10.00000000000000000 ) ; +#2251 = CARTESIAN_POINT ( 'NONE', ( 4.719623004303849200, -9.902985330893528700, 20.24219471086329500 ) ) ; +#2252 = CARTESIAN_POINT ( 'NONE', ( 24.54383153412162200, -12.49999999999999800, -13.45721868410399200 ) ) ; +#2253 = FACE_OUTER_BOUND ( 'NONE', #7031, .T. ) ; +#2254 = CARTESIAN_POINT ( 'NONE', ( 34.40471146842642700, -30.27609729609960400, 25.26547179591960200 ) ) ; +#2255 = ORIENTED_EDGE ( 'NONE', *, *, #6416, .T. ) ; +#2256 = CARTESIAN_POINT ( 'NONE', ( 28.03681819437648700, -12.49999999999998900, 20.77142908655474000 ) ) ; +#2257 = CARTESIAN_POINT ( 'NONE', ( 33.65895121530455500, -30.27379417176804600, 25.76033561630831100 ) ) ; +#2258 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #8958 ) ; +#2259 = CARTESIAN_POINT ( 'NONE', ( 4.833107476367771900, -19.00687464454283300, 16.56279109610644100 ) ) ; +#2260 = CARTESIAN_POINT ( 'NONE', ( 13.63308447821698300, -95.07596123493894400, 16.58686576284303600 ) ) ; +#2261 = CARTESIAN_POINT ( 'NONE', ( 36.00433884264336400, -33.74419138908464800, 12.27932788241868100 ) ) ; +#2262 = CARTESIAN_POINT ( 'NONE', ( 6.975101012481732500, -29.89525553285562500, 26.05858557038477500 ) ) ; +#2263 = AXIS2_PLACEMENT_3D ( 'NONE', #7197, #576, #8350 ) ; +#2264 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000000, -18.70000000000000600 ) ) ; +#2265 = CARTESIAN_POINT ( 'NONE', ( 16.15788735629173400, -33.32023780227457600, 26.50878423109626100 ) ) ; +#2266 = CARTESIAN_POINT ( 'NONE', ( 33.35350530012105000, -100.0000000000000100, -31.96713653986546400 ) ) ; +#2267 = CARTESIAN_POINT ( 'NONE', ( 16.83241603822063900, -19.29356219706932400, 23.36129423776450400 ) ) ; +#2268 = CARTESIAN_POINT ( 'NONE', ( 37.49899447895524700, -21.21650412272819600, 7.967187452582193100 ) ) ; +#2269 = VERTEX_POINT ( 'NONE', #759 ) ; +#2270 = CARTESIAN_POINT ( 'NONE', ( 29.75983611797026300, -30.80104451405020800, 27.61271444808847900 ) ) ; +#2271 = CARTESIAN_POINT ( 'NONE', ( 3.315393296275910700, -28.86024347650288400, 21.16658790134226800 ) ) ; +#2272 = CARTESIAN_POINT ( 'NONE', ( 8.949867366569717900, -31.03691746055426000, 27.00489531282526200 ) ) ; +#2273 = CARTESIAN_POINT ( 'NONE', ( 36.07169244583414500, -30.18679898123387800, 23.74124729305303200 ) ) ; +#2274 = DIRECTION ( 'NONE', ( 1.224646799147353200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#2275 = AXIS2_PLACEMENT_3D ( 'NONE', #13241, #6534, #9895 ) ; +#2276 = ADVANCED_FACE ( 'NONE', ( #14057 ), #8905, .F. ) ; +#2277 = ORIENTED_EDGE ( 'NONE', *, *, #3962, .T. ) ; +#2278 = CARTESIAN_POINT ( 'NONE', ( 37.48400399412037100, -26.59148914142688000, 7.569409600065114300 ) ) ; +#2279 = CARTESIAN_POINT ( 'NONE', ( 5.385125165053366900, -29.33833905184670200, 24.66217318485382700 ) ) ; +#2280 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999987600, -21.23105625617644800, 7.788262581895251600 ) ) ; +#2281 = CARTESIAN_POINT ( 'NONE', ( 34.54507653870284400, -95.07596123493898700, 13.25333651340964300 ) ) ; +#2282 = VERTEX_POINT ( 'NONE', #20 ) ; +#2283 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2284 = CARTESIAN_POINT ( 'NONE', ( 3.428181102580846900, -28.98270986331647200, 22.03993024822455700 ) ) ; +#2285 = CARTESIAN_POINT ( 'NONE', ( 23.70719608933878300, -97.51638471114894500, 22.06850012136324300 ) ) ; +#2286 = CARTESIAN_POINT ( 'NONE', ( 31.64982680603600000, -30.89955648737935700, 26.77209035898843600 ) ) ; +#2287 = CARTESIAN_POINT ( 'NONE', ( 31.95953573731673800, -11.01525533684549500, -25.00000000000000700 ) ) ; +#2288 = CARTESIAN_POINT ( 'NONE', ( 28.83681243452684500, -30.81569756612924800, 27.90980134945375100 ) ) ; +#2289 = CARTESIAN_POINT ( 'NONE', ( 37.27754170887653400, -30.12347295988848500, 21.60499023859549100 ) ) ; +#2290 = ORIENTED_EDGE ( 'NONE', *, *, #1429, .F. ) ; +#2291 = CARTESIAN_POINT ( 'NONE', ( 15.22594537515987900, -12.49999999999999800, -13.04344302088001200 ) ) ; +#2292 = CARTESIAN_POINT ( 'NONE', ( 15.08223375047093000, -12.50000000000002000, 8.221049384359076800 ) ) ; +#2293 = CARTESIAN_POINT ( 'NONE', ( 31.28679656440356600, -99.99999999999998600, -40.86942826376122200 ) ) ; +#2294 = AXIS2_PLACEMENT_3D ( 'NONE', #6919, #9444, #2744 ) ; +#2295 = CARTESIAN_POINT ( 'NONE', ( 4.294025317888195300, -30.90779168087546600, 23.02567346301589500 ) ) ; +#2296 = VERTEX_POINT ( 'NONE', #1103 ) ; +#2297 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11469, #13619, #4730 ), + ( #12567, #5861, #13673 ), + ( #6983, #376, #8135 ), + ( #1466, #9262, #2562 ), + ( #10379, #3669, #11517 ), + ( #4783, #12613, #5907 ), + ( #13720, #7038, #420 ), + ( #8187, #1520, #9310 ), + ( #2606, #10432, #3721 ), + ( #11562, #4825, #12666 ), + ( #5957, #13764, #7085 ), + ( #469, #8237, #1563 ), + ( #9359, #2653, #10483 ), + ( #3770, #11610, #4874 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0004572459325032712700, 0.003484838554945000200, 0.004998634866165864800, 0.006512431177386729400, 0.008026227488607594000, 0.009540023799828458600, 0.01256761642227018800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7839037970967618300, 1.000000000000000000), + ( 1.000000000000000000, 0.7775858699908943000, 1.000000000000000000), + ( 1.000000000000000000, 0.7707346577157235800, 1.000000000000000000), + ( 1.000000000000000000, 0.7595241015150259200, 1.000000000000000000), + ( 1.000000000000000000, 0.7556065527481823400, 1.000000000000000000), + ( 1.000000000000000000, 0.7475455865548428200, 1.000000000000000000), + ( 1.000000000000000000, 0.7434139113204787400, 1.000000000000000000), + ( 1.000000000000000000, 0.7349209616079666100, 1.000000000000000000), + ( 1.000000000000000000, 0.7305598040195793200, 1.000000000000000000), + ( 1.000000000000000000, 0.7215696658680179600, 1.000000000000000000), + ( 1.000000000000000000, 0.7169150337986933700, 1.000000000000000000), + ( 1.000000000000000000, 0.7026688094594204500, 1.000000000000000000), + ( 1.000000000000000000, 0.6928659797944712900, 1.000000000000000000), + ( 1.000000000000000000, 0.6825647384486009900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2298 = CARTESIAN_POINT ( 'NONE', ( 0.6167956729360190000, -10.00000000000000400, 12.83835384958865300 ) ) ; +#2299 = CARTESIAN_POINT ( 'NONE', ( 31.18128672046121300, -21.25143205721790500, -20.92139870600336600 ) ) ; +#2300 = CARTESIAN_POINT ( 'NONE', ( 6.465991790484928000, -36.63810358511964400, 15.40218266578074600 ) ) ; +#2301 = CARTESIAN_POINT ( 'NONE', ( 34.16226450154011500, -31.12708407605223800, 24.82205698680284900 ) ) ; +#2302 = EDGE_LOOP ( 'NONE', ( #3308, #14148, #13774, #13915 ) ) ; +#2303 = CARTESIAN_POINT ( 'NONE', ( 23.61903317169539900, -12.49999999999999600, 9.869052716132756600 ) ) ; +#2304 = CARTESIAN_POINT ( 'NONE', ( 33.54670211836793200, -31.05736406683353600, 25.46094282438561500 ) ) ; +#2305 = APPROVAL_ROLE ( '' ) ; +#2306 = CARTESIAN_POINT ( 'NONE', ( 5.832697366891692600, -19.49124421728030400, 17.72150347664330300 ) ) ; +#2307 = CARTESIAN_POINT ( 'NONE', ( 28.36079104094227400, -38.80943941801214000, 18.72008847555554200 ) ) ; +#2308 = CARTESIAN_POINT ( 'NONE', ( 7.031484639082556500, -30.93435508792153100, 25.99006083654265700 ) ) ; +#2309 = CARTESIAN_POINT ( 'NONE', ( 32.46242584221887700, -100.0000000000000100, 1.600059941120311100 ) ) ; +#2310 = ORIENTED_EDGE ( 'NONE', *, *, #7423, .T. ) ; +#2311 = CARTESIAN_POINT ( 'NONE', ( 4.414950101942010500, -94.81572196524351200, 8.755769211343308100 ) ) ; +#2312 = CARTESIAN_POINT ( 'NONE', ( 10.21824859051905300, -30.67905072742235400, 27.64106482197674100 ) ) ; +#2313 = CARTESIAN_POINT ( 'NONE', ( 9.893054025491499800, -12.09649732422267800, -25.07166657902247000 ) ) ; +#2314 = CARTESIAN_POINT ( 'NONE', ( 37.49869198506767300, -20.39234452573220200, 8.174246142609872500 ) ) ; +#2315 = ORIENTED_EDGE ( 'NONE', *, *, #8840, .T. ) ; +#2316 = CARTESIAN_POINT ( 'NONE', ( 29.55554449795960500, -30.66022126106888700, 27.70392084266745100 ) ) ; +#2317 = FACE_OUTER_BOUND ( 'NONE', #13865, .T. ) ; +#2318 = CARTESIAN_POINT ( 'NONE', ( 2.506229991081256900, -27.46389606112258600, 9.264321268203367800 ) ) ; +#2319 = CARTESIAN_POINT ( 'NONE', ( 8.929899880342107500, -30.65054479399841000, 27.11863040063341800 ) ) ; +#2320 = CARTESIAN_POINT ( 'NONE', ( 35.51730056251998500, -30.95534293906655100, 23.28547341019776300 ) ) ; +#2321 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2322 = ORIENTED_EDGE ( 'NONE', *, *, #6635, .T. ) ; +#2323 = CARTESIAN_POINT ( 'NONE', ( 5.268705920048935500, -30.60565495996231200, 24.89431248270102900 ) ) ; +#2324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#2325 = CYLINDRICAL_SURFACE ( 'NONE', #12018, 3.189999999999995100 ) ; +#2326 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2327 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#2328 = EDGE_LOOP ( 'NONE', ( #10245, #2554, #4889, #11048 ) ) ; +#2329 = CARTESIAN_POINT ( 'NONE', ( 3.245812709893420400, -30.46150472171846600, 21.93631211189163500 ) ) ; +#2330 = VECTOR ( 'NONE', #6869, 1000.000000000000000 ) ; +#2331 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 8.981438871123705400, 20.00000000000000000 ) ) ; +#2332 = CARTESIAN_POINT ( 'NONE', ( 31.53461834124601600, -30.20565276029982400, 26.90511945230875700 ) ) ; +#2333 = DIRECTION ( 'NONE', ( -0.01909900421572798000, -0.9998175973836266300, 0.0000000000000000000 ) ) ; +#2334 = CARTESIAN_POINT ( 'NONE', ( 28.83692928710072700, -30.83073652152810600, 27.90711554012319300 ) ) ; +#2335 = CARTESIAN_POINT ( 'NONE', ( 36.42996773566556400, -28.88652470602778500, 21.88504443213056300 ) ) ; +#2336 = CARTESIAN_POINT ( 'NONE', ( 25.54638616276603400, -27.29302315273448800, 21.64088748823254700 ) ) ; +#2337 = CARTESIAN_POINT ( 'NONE', ( 5.948098218019811900, -21.83835892191338600, -16.71967851401682700 ) ) ; +#2338 = CARTESIAN_POINT ( 'NONE', ( 5.583026071854976500, -23.02272167190580600, 11.31546683090219000 ) ) ; +#2339 = CARTESIAN_POINT ( 'NONE', ( 4.710802469542677800, -12.20600865014933200, -22.36429007042092100 ) ) ; +#2340 = CARTESIAN_POINT ( 'NONE', ( 3.650242949667065400, -30.13218867182945400, 23.39254327264192700 ) ) ; +#2341 = ORIENTED_EDGE ( 'NONE', *, *, #11031, .F. ) ; +#2342 = LINE ( 'NONE', #3506, #2330 ) ; +#2343 = CARTESIAN_POINT ( 'NONE', ( 17.67409979068790400, -9.999999999999996400, 25.81642715810074800 ) ) ; +#2344 = ADVANCED_FACE ( 'NONE', ( #13009 ), #12845, .F. ) ; +#2345 = CARTESIAN_POINT ( 'NONE', ( 29.65611623082778100, -12.50000000000012600, -20.69451609782725000 ) ) ; +#2346 = CARTESIAN_POINT ( 'NONE', ( 2.637176870989592600, -29.24818328054203000, 8.473425291598982100 ) ) ; +#2347 = CARTESIAN_POINT ( 'NONE', ( 34.17252819133774000, -30.01416449989389100, 25.38425857582447200 ) ) ; +#2348 = VERTEX_POINT ( 'NONE', #10013 ) ; +#2349 = CARTESIAN_POINT ( 'NONE', ( 28.47231235949687900, -24.02435942459161600, 18.47992982887575100 ) ) ; +#2350 = CARTESIAN_POINT ( 'NONE', ( 33.50551153018314200, -29.93966015003774200, 25.78916557137268800 ) ) ; +#2351 = CARTESIAN_POINT ( 'NONE', ( 10.85410004537036200, -30.86025997667724900, 27.80614220837330200 ) ) ; +#2352 = CARTESIAN_POINT ( 'NONE', ( 6.900884549896918700, -19.89993819674015500, 18.80090274426455100 ) ) ; +#2353 = CARTESIAN_POINT ( 'NONE', ( 23.54477261767168300, -25.60470989785914900, 22.25067648624617400 ) ) ; +#2354 = CARTESIAN_POINT ( 'NONE', ( 25.00000000325750100, -12.50000000000000400, -12.05649721588824400 ) ) ; +#2355 = CARTESIAN_POINT ( 'NONE', ( 7.000307284657074200, -30.23031481033915600, 26.16356611637374400 ) ) ; +#2356 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -99.99999999999998600, 6.630571736238761300 ) ) ; +#2357 = LINE ( 'NONE', #258, #2207 ) ; +#2358 = ORIENTED_EDGE ( 'NONE', *, *, #4397, .T. ) ; +#2359 = CARTESIAN_POINT ( 'NONE', ( 39.99653870521236600, -10.01384517915050800, 10.47571753923452700 ) ) ; +#2360 = EDGE_CURVE ( 'NONE', #1747, #8489, #6657, .T. ) ; +#2361 = CARTESIAN_POINT ( 'NONE', ( 4.531044492923241400, -31.25564718341557200, 24.61397145520776400 ) ) ; +#2362 = CARTESIAN_POINT ( 'NONE', ( 11.76044685354238700, -10.21539878538069600, -25.03798061747447800 ) ) ; +#2363 = CARTESIAN_POINT ( 'NONE', ( 37.58935403727682000, -19.58056529669263300, 8.576081865561398800 ) ) ; +#2364 = VERTEX_POINT ( 'NONE', #10065 ) ; +#2365 = CARTESIAN_POINT ( 'NONE', ( 8.950897864415720700, -30.29941512163750900, 27.13258835004803200 ) ) ; +#2366 = CARTESIAN_POINT ( 'NONE', ( 35.96145946756082900, -29.92155038000438000, 23.89125434878189900 ) ) ; +#2367 = CARTESIAN_POINT ( 'NONE', ( 30.74561839105273700, -30.90259938947477600, 27.25513505366785700 ) ) ; +#2368 = LINE ( 'NONE', #10358, #1649 ) ; +#2369 = CARTESIAN_POINT ( 'NONE', ( 23.94489186942783500, -18.94125950240372400, 23.40460098808403800 ) ) ; +#2370 = CARTESIAN_POINT ( 'NONE', ( 5.431586981618944600, -29.58139078984771700, 24.89501789951351500 ) ) ; +#2371 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -10.00000000000000500, -24.99999999999999600 ) ) ; +#2372 = CARTESIAN_POINT ( 'NONE', ( 6.045916309012764800, -12.50000000000040100, 14.69000660857653900 ) ) ; +#2373 = CARTESIAN_POINT ( 'NONE', ( 0.4708028473005530000, -11.88321138920213800, 8.020575686050060300 ) ) ; +#2374 = CARTESIAN_POINT ( 'NONE', ( 36.21959056214611600, -29.02107005968805700, 24.44397294894229600 ) ) ; +#2375 = EDGE_LOOP ( 'NONE', ( #10582, #10915, #5960, #1836 ) ) ; +#2376 = EDGE_CURVE ( 'NONE', #8443, #9622, #8645, .T. ) ; +#2377 = CARTESIAN_POINT ( 'NONE', ( 2.943343909252671900, -29.30335999367975200, 22.13130297717603100 ) ) ; +#2378 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #11995, #4155, #13105, #6399 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896100, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2379 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -30.65936817455452300, 28.85719598643633100 ) ) ; +#2380 = CARTESIAN_POINT ( 'NONE', ( 31.56324429674432300, -30.71728689312029200, 26.87640991149922700 ) ) ; +#2381 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 1.981438871123700300 ) ) ; +#2382 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457651600, -30.82655086342984100, 27.93782961424065900 ) ) ; +#2383 = CARTESIAN_POINT ( 'NONE', ( 37.49155857941019600, -29.79220083493490600, 21.72682941013468400 ) ) ; +#2384 = CARTESIAN_POINT ( 'NONE', ( 30.16738833806864800, -28.70989459183492800, 27.66491212178129500 ) ) ; +#2385 = CARTESIAN_POINT ( 'NONE', ( 5.213003122873074900, -12.50000000000085600, 12.26170608215926400 ) ) ; +#2386 = AXIS2_PLACEMENT_3D ( 'NONE', #9988, #3274, #11121 ) ; +#2387 = CARTESIAN_POINT ( 'NONE', ( 4.270748000808295000, -29.08891021122855800, 23.35548418594886000 ) ) ; +#2388 = ORIENTED_EDGE ( 'NONE', *, *, #5269, .F. ) ; +#2389 = CARTESIAN_POINT ( 'NONE', ( 10.67264159402569800, -19.61230474633199300, 21.67623321130022500 ) ) ; +#2390 = CARTESIAN_POINT ( 'NONE', ( 23.97311664777699700, -12.49999999999999800, -14.05508890451629300 ) ) ; +#2391 = CARTESIAN_POINT ( 'NONE', ( 34.99999998962731200, -95.07596123493894400, 12.92969265702111400 ) ) ; +#2392 = CARTESIAN_POINT ( 'NONE', ( 34.11187638141436900, -30.90083502873428500, 25.15110122050180800 ) ) ; +#2393 = CARTESIAN_POINT ( 'NONE', ( 30.05149211282411800, -12.50000000000026600, 19.53363582332439200 ) ) ; +#2394 = EDGE_CURVE ( 'NONE', #9194, #10184, #6277, .T. ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( 33.54716464892385400, -30.75437398114606700, 25.70627751870116000 ) ) ; +#2396 = CARTESIAN_POINT ( 'NONE', ( 10.85516947506772700, -30.79550571680029900, 27.81875855575099300 ) ) ; +#2397 = CARTESIAN_POINT ( 'NONE', ( 9.233193756288088100, -20.16154479426108300, 20.68631757671958500 ) ) ; +#2398 = CARTESIAN_POINT ( 'NONE', ( 34.76301837417467100, -22.16442911902874300, -14.38091260687412500 ) ) ; +#2399 = CARTESIAN_POINT ( 'NONE', ( 7.356456033485269300, -31.13968461756647700, 26.04943675325587200 ) ) ; +#2400 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.499999999999998200, 20.00000000000000400 ) ) ; +#2401 = CARTESIAN_POINT ( 'NONE', ( 1.962232382345347100, -11.88475912993685300, 15.12512929832634800 ) ) ; +#2402 = CARTESIAN_POINT ( 'NONE', ( 37.72553891758146000, -18.82848440360838500, 9.372306841399130000 ) ) ; +#2403 = CARTESIAN_POINT ( 'NONE', ( 16.07873927706463100, -18.49451149834504400, 23.50218843490353000 ) ) ; +#2404 = CARTESIAN_POINT ( 'NONE', ( 9.029503391931887900, -30.74635142896752900, 27.14463520662088700 ) ) ; +#2405 = CARTESIAN_POINT ( 'NONE', ( 35.50918595282029600, -30.92338573487814200, 23.41741476992378100 ) ) ; +#2406 = CARTESIAN_POINT ( 'NONE', ( 34.47151641255980800, -29.20324862923696700, 25.63907496366241600 ) ) ; +#2407 = CIRCLE ( 'NONE', #5239, 1.200000000000010200 ) ; +#2408 = CARTESIAN_POINT ( 'NONE', ( 24.63730331802137700, -17.73602199176751200, 23.63593059950161300 ) ) ; +#2409 = CARTESIAN_POINT ( 'NONE', ( 5.760358893873073400, -30.98308773117845800, 24.94258216453295800 ) ) ; +#2410 = CARTESIAN_POINT ( 'NONE', ( -1.952106145227808800, -10.00000000000000400, 7.857995290969798300 ) ) ; +#2411 = ORIENTED_EDGE ( 'NONE', *, *, #2833, .T. ) ; +#2412 = CARTESIAN_POINT ( 'NONE', ( 15.43906446943920900, -12.50000000000000500, 9.023109063028345000 ) ) ; +#2413 = CARTESIAN_POINT ( 'NONE', ( 0.3462301456086924200, -11.38492058243470100, 9.447565319110596600 ) ) ; +#2414 = CARTESIAN_POINT ( 'NONE', ( 33.12932096251380200, -31.92682544746633500, 25.95177330082836400 ) ) ; +#2415 = CARTESIAN_POINT ( 'NONE', ( 3.688363848778978500, -30.67202803555780500, 22.01721073271563600 ) ) ; +#2416 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2417 = CARTESIAN_POINT ( 'NONE', ( 11.22937329422754300, -30.65936817455452300, 27.95662136398578200 ) ) ; +#2418 = CARTESIAN_POINT ( 'NONE', ( 31.33892885944762000, -30.22303634298326700, 26.99663793784628000 ) ) ; +#2419 = CARTESIAN_POINT ( 'NONE', ( 28.23955314646853100, -9.781278341185187100, -24.99999999999999600 ) ) ; +#2420 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650500, -30.82655086342983700, 27.93782961424065500 ) ) ; +#2421 = CARTESIAN_POINT ( 'NONE', ( 36.42827211440615500, -30.58004699861151800, 21.58660428072269600 ) ) ; +#2422 = CARTESIAN_POINT ( 'NONE', ( 16.66691576264561200, -22.03500000000001400, 20.37790478717370500 ) ) ; +#2423 = CARTESIAN_POINT ( 'NONE', ( 31.54554743666303200, -20.56720405135758500, 20.05766825628243700 ) ) ; +#2424 = CARTESIAN_POINT ( 'NONE', ( 4.482471619646084100, -30.95522396431534400, 23.28524787770508900 ) ) ; +#2425 = EDGE_LOOP ( 'NONE', ( #11787, #7634, #5579, #2685 ) ) ; +#2426 = CARTESIAN_POINT ( 'NONE', ( 4.057439393967174000, -30.51097768351019500, 23.61285349891113900 ) ) ; +#2427 = EDGE_CURVE ( 'NONE', #7532, #498, #12977, .T. ) ; +#2428 = CARTESIAN_POINT ( 'NONE', ( 16.68311359006744300, -12.50000000000000200, -14.41424703278516400 ) ) ; +#2429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2430 = CARTESIAN_POINT ( 'NONE', ( 22.31280616483239100, -30.65917406624146200, 28.85723021296910300 ) ) ; +#2431 = CARTESIAN_POINT ( 'NONE', ( 29.37712998916817100, -21.05135793922552500, -22.34868019920234500 ) ) ; +#2432 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #6227, #11825, #7358, #729 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 0.5000000620918260100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9899186996617246300, 0.9899186996617246300, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2433 = CARTESIAN_POINT ( 'NONE', ( 33.79993242509596700, -29.69828989797307300, 25.49506248316759400 ) ) ; +#2434 = CARTESIAN_POINT ( 'NONE', ( 23.88090513616222700, -12.49999999999998200, 9.712676768545446000 ) ) ; +#2435 = CARTESIAN_POINT ( 'NONE', ( 33.25619132373663700, -29.71992394622642000, 25.84717743606469000 ) ) ; +#2436 = ORIENTED_EDGE ( 'NONE', *, *, #6478, .T. ) ; +#2437 = CARTESIAN_POINT ( 'NONE', ( 11.05966201856206500, -30.84522177527344400, 27.87327597113989700 ) ) ; +#2438 = CARTESIAN_POINT ( 'NONE', ( 10.88596609055574000, -19.14431682978017700, 21.88784173526136100 ) ) ; +#2439 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2440 = CARTESIAN_POINT ( 'NONE', ( 34.37908720565923900, -12.50000000000010700, -14.50693570366132200 ) ) ; +#2441 = CARTESIAN_POINT ( 'NONE', ( 5.018438909250667400, -22.60948127223892000, 8.352380287604880500 ) ) ; +#2442 = AXIS2_PLACEMENT_3D ( 'NONE', #3485, #11331, #4603 ) ; +#2443 = CARTESIAN_POINT ( 'NONE', ( 22.49183809129696600, -33.35180196542449200, 26.50734624295223400 ) ) ; +#2444 = CARTESIAN_POINT ( 'NONE', ( 4.934635331729898800, -95.07596123493894400, 12.88291539575248700 ) ) ; +#2445 = ORIENTED_EDGE ( 'NONE', *, *, #1992, .T. ) ; +#2446 = CARTESIAN_POINT ( 'NONE', ( 37.11649571471682700, -20.94309469955154100, 11.29725218139568600 ) ) ; +#2447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#2448 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#2449 = CARTESIAN_POINT ( 'NONE', ( 9.045705909673847200, -30.35157413340232300, 27.17717429721367100 ) ) ; +#2450 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3528, #4641, #11370, #5763 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 9.017250012811365000E-005 ), + .UNSPECIFIED. ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( 35.61500560591928600, -29.55920392425980500, 24.02948416587164400 ) ) ; +#2452 = ORIENTED_EDGE ( 'NONE', *, *, #6901, .T. ) ; +#2453 = CARTESIAN_POINT ( 'NONE', ( 36.49790722170357800, -28.88147714172244600, 21.70937197210919900 ) ) ; +#2454 = EDGE_CURVE ( 'NONE', #3367, #5453, #12828, .T. ) ; +#2455 = CARTESIAN_POINT ( 'NONE', ( 25.88507496471196800, -14.24185467741209800, 24.25204657212779600 ) ) ; +#2456 = CARTESIAN_POINT ( 'NONE', ( 5.629379885372209500, -30.05324975711399600, 25.26502416197055100 ) ) ; +#2457 = DIRECTION ( 'NONE', ( -0.4424554719049119700, 1.488510301554792900E-014, -0.8967904746268226000 ) ) ; +#2458 = ORIENTED_EDGE ( 'NONE', *, *, #8810, .T. ) ; +#2459 = CARTESIAN_POINT ( 'NONE', ( 7.986409301300623700, -23.62603394897446000, 15.63521431389771400 ) ) ; +#2460 = CARTESIAN_POINT ( 'NONE', ( 2.586021373522274600, -10.00000000000000500, 20.65015935808747500 ) ) ; +#2461 = CARTESIAN_POINT ( 'NONE', ( 27.62346559064499700, -33.00067643241342100, 25.95391432591101500 ) ) ; +#2462 = CARTESIAN_POINT ( 'NONE', ( 11.21372930123017800, -11.10548149500840700, 24.44268225136573800 ) ) ; +#2463 = AXIS2_PLACEMENT_3D ( 'NONE', #4511, #7892, #1237 ) ; +#2464 = CARTESIAN_POINT ( 'NONE', ( 2.705126343905176300, -29.68692404792032800, 22.17423917227409500 ) ) ; +#2465 = ORIENTED_EDGE ( 'NONE', *, *, #9023, .F. ) ; +#2466 = CARTESIAN_POINT ( 'NONE', ( 31.36696880813039100, -30.62299011444348900, 26.98807700020047000 ) ) ; +#2467 = CARTESIAN_POINT ( 'NONE', ( 37.35870976800717400, -29.47783737050073000, 21.89264259788322100 ) ) ; +#2468 = CARTESIAN_POINT ( 'NONE', ( 11.91883819619316200, -100.0000000000000100, 5.321834943021102900 ) ) ; +#2469 = CARTESIAN_POINT ( 'NONE', ( 32.21655355009546900, -26.83654946842787900, 18.49332059385973900 ) ) ; +#2470 = CARTESIAN_POINT ( 'NONE', ( 17.43873306433760500, -19.88639360367599800, 23.25676206576839900 ) ) ; +#2471 = VERTEX_POINT ( 'NONE', #7895 ) ; +#2472 = CARTESIAN_POINT ( 'NONE', ( 6.332495087916067100, -31.16598028360522200, 25.23761372309195400 ) ) ; +#2473 = EDGE_CURVE ( 'NONE', #12584, #6546, #12813, .T. ) ; +#2474 = CIRCLE ( 'NONE', #9995, 2.500000000000002700 ) ; +#2475 = CARTESIAN_POINT ( 'NONE', ( 4.211560504891742200, -29.41390785863411800, 23.71781466394955400 ) ) ; +#2476 = CARTESIAN_POINT ( 'NONE', ( 26.91621946393884800, -13.37768706406273200, -25.59557736178429700 ) ) ; +#2477 = CARTESIAN_POINT ( 'NONE', ( 31.92504062929958100, -19.66096426143597500, 19.96040237347081000 ) ) ; +#2478 = CARTESIAN_POINT ( 'NONE', ( 27.78501998344896200, -11.54554441201135100, 24.55307130324980100 ) ) ; +#2479 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10556, #8306, #9468, #2770 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#2480 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.012992490988985100, 13.25807028085160700 ) ) ; +#2481 = ADVANCED_FACE ( 'NONE', ( #12993 ), #12676, .F. ) ; +#2482 = CARTESIAN_POINT ( 'NONE', ( 17.16458124010700800, -12.50000000000000700, 10.14164662228683200 ) ) ; +#2483 = ORIENTED_EDGE ( 'NONE', *, *, #4196, .F. ) ; +#2484 = CARTESIAN_POINT ( 'NONE', ( 28.06184387172246600, -12.50000000000012400, -21.63857497868917100 ) ) ; +#2485 = CARTESIAN_POINT ( 'NONE', ( 38.03806154127266800, -10.00000000000000000, -23.10465787550364100 ) ) ; +#2486 = AXIS2_PLACEMENT_3D ( 'NONE', #12168, #3173, #12206 ) ; +#2487 = CARTESIAN_POINT ( 'NONE', ( 30.23831721645143800, -23.86352046072045500, 17.33180973104980900 ) ) ; +#2488 = CARTESIAN_POINT ( 'NONE', ( 33.39383401179509300, -30.53369581171783100, 25.91012442269487400 ) ) ; +#2489 = ORIENTED_EDGE ( 'NONE', *, *, #6763, .F. ) ; +#2490 = CARTESIAN_POINT ( 'NONE', ( 11.06047772555895900, -30.81852478704109500, 27.87841877769959000 ) ) ; +#2491 = CARTESIAN_POINT ( 'NONE', ( 12.29907835899584300, -19.44626948464377800, 22.41263712900270400 ) ) ; +#2492 = CARTESIAN_POINT ( 'NONE', ( 15.17084455220625500, -12.49999999999999300, -12.90971960814996900 ) ) ; +#2493 = CARTESIAN_POINT ( 'NONE', ( 2.201425001453305900, -18.80570000581308300, 8.005331014629296900 ) ) ; +#2494 = CARTESIAN_POINT ( 'NONE', ( 24.90721081770329100, -12.49999999999998000, -12.66934056561081500 ) ) ; +#2495 = CARTESIAN_POINT ( 'NONE', ( 4.896303435600251500, -12.50000000000003900, 10.03881561381535900 ) ) ; +#2496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2497 = CARTESIAN_POINT ( 'NONE', ( 22.83235021167296700, -12.49999999999999100, 10.12441659991976900 ) ) ; +#2498 = CARTESIAN_POINT ( 'NONE', ( 5.846908230356781600, -95.07596123493894400, 13.53716216741325200 ) ) ; +#2499 = ORIENTED_EDGE ( 'NONE', *, *, #7270, .T. ) ; +#2500 = EDGE_CURVE ( 'NONE', #10184, #14178, #6832, .T. ) ; +#2501 = CARTESIAN_POINT ( 'NONE', ( 36.74126433403050400, -20.17847467798719700, 12.78433368890160300 ) ) ; +#2502 = CARTESIAN_POINT ( 'NONE', ( 36.06078499381722900, -10.00000000000000400, -22.83012767010394100 ) ) ; +#2503 = CARTESIAN_POINT ( 'NONE', ( 9.233537914456539000, -30.88153519304635400, 27.19554807379882900 ) ) ; +#2504 = CARTESIAN_POINT ( 'NONE', ( 35.61500857876554000, -30.68070183282981500, 23.83163914239449000 ) ) ; +#2505 = FACE_OUTER_BOUND ( 'NONE', #12833, .T. ) ; +#2506 = EDGE_LOOP ( 'NONE', ( #7829, #1005, #8339, #10496 ) ) ; +#2507 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2508 = VECTOR ( 'NONE', #5580, 1000.000000000000000 ) ; +#2509 = CARTESIAN_POINT ( 'NONE', ( 6.006210110183495500, -31.15284525542604400, 24.95397729019124000 ) ) ; +#2510 = ORIENTED_EDGE ( 'NONE', *, *, #9119, .F. ) ; +#2511 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000000000, 20.00000000000000000 ) ) ; +#2512 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -31.29513776008464300, 28.74509265499353800 ) ) ; +#2513 = CARTESIAN_POINT ( 'NONE', ( 17.49712976857738400, -28.77860035106511200, 29.18882609816581900 ) ) ; +#2514 = CARTESIAN_POINT ( 'NONE', ( 3.718689898146470000, -28.93433909960238600, 22.32451224449722500 ) ) ; +#2515 = LINE ( 'NONE', #7766, #3038 ) ; +#2516 = EDGE_CURVE ( 'NONE', #8328, #13850, #8748, .T. ) ; +#2517 = VERTEX_POINT ( 'NONE', #2381 ) ; +#2518 = CARTESIAN_POINT ( 'NONE', ( 31.34029203545246700, -31.06111245246514200, 26.85188049561455900 ) ) ; +#2519 = CARTESIAN_POINT ( 'NONE', ( 12.81556656898726300, -28.88618117369600900, 28.67220795627904200 ) ) ; +#2520 = CARTESIAN_POINT ( 'NONE', ( 36.58970216335690400, -30.52932968698534600, 21.71184567814776000 ) ) ; +#2521 = CARTESIAN_POINT ( 'NONE', ( 7.536133408201110700, -22.03500000000001400, 15.37935411529139000 ) ) ; +#2522 = CARTESIAN_POINT ( 'NONE', ( 37.05226933084085800, -28.76919807924767300, 19.52369139872486400 ) ) ; +#2523 = CARTESIAN_POINT ( 'NONE', ( 8.660774616636016900, -31.07172699683635700, 26.84686540795177500 ) ) ; +#2524 = CARTESIAN_POINT ( 'NONE', ( 4.422550061453414100, -30.86287148461142100, 23.47388783929534700 ) ) ; +#2525 = CARTESIAN_POINT ( 'NONE', ( 34.22809872185568000, -12.19510205258467600, -25.38705571723504700 ) ) ; +#2526 = CARTESIAN_POINT ( 'NONE', ( -3.365226333685865700E-015, -24.23648177666926200, 19.98972415240891800 ) ) ; +#2527 = CARTESIAN_POINT ( 'NONE', ( 11.44866452277642000, -10.00638176112990200, -24.99999999999882000 ) ) ; +#2528 = LINE ( 'NONE', #12509, #2155 ) ; +#2529 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#2530 = CARTESIAN_POINT ( 'NONE', ( 15.07743144299248800, -12.50000000000003200, 8.221862349898755100 ) ) ; +#2531 = ORIENTED_EDGE ( 'NONE', *, *, #13041, .F. ) ; +#2532 = AXIS2_PLACEMENT_3D ( 'NONE', #2065, #12029, #9884 ) ; +#2533 = CARTESIAN_POINT ( 'NONE', ( 23.46155564479223400, -12.50000000000001200, -14.35149710614231500 ) ) ; +#2534 = CARTESIAN_POINT ( 'NONE', ( 34.42344098301610000, -10.00000000000087900, -23.30104150350724600 ) ) ; +#2535 = CARTESIAN_POINT ( 'NONE', ( 32.16452277609828100, -12.49999999999976000, 17.52337601000713000 ) ) ; +#2536 = CARTESIAN_POINT ( 'NONE', ( 33.24934550208665500, -31.16967388384403400, 25.58128931437897800 ) ) ; +#2537 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3178, #5393, #8808, #2110 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896800, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243650500, 0.8047378541243650500, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2538 = EDGE_LOOP ( 'NONE', ( #8222, #10920, #3389, #3179 ) ) ; +#2539 = CARTESIAN_POINT ( 'NONE', ( 11.05969967794525000, -30.78765843876809800, 27.88344796565073100 ) ) ; +#2540 = CARTESIAN_POINT ( 'NONE', ( 13.74545676831198900, -19.71293007528301200, 22.81120545965513800 ) ) ; +#2541 = CARTESIAN_POINT ( 'NONE', ( 5.575569655367963200, -21.98031972476679400, -15.70008470188391100 ) ) ; +#2542 = CARTESIAN_POINT ( 'NONE', ( 34.37095701828239000, -21.95741489608437600, -15.86612809537846900 ) ) ; +#2543 = CARTESIAN_POINT ( 'NONE', ( 15.05668941158102200, -12.50000000000002000, 8.110138918246992300 ) ) ; +#2544 = EDGE_CURVE ( 'NONE', #7223, #12041, #5554, .T. ) ; +#2545 = VECTOR ( 'NONE', #13424, 1000.000000000000000 ) ; +#2546 = CARTESIAN_POINT ( 'NONE', ( 0.07775222879382696900, 10.13028869250944000, 16.78864349177028000 ) ) ; +#2547 = CARTESIAN_POINT ( 'NONE', ( 17.42649082925215600, -19.89845033991126800, 23.25457520830295300 ) ) ; +#2548 = CARTESIAN_POINT ( 'NONE', ( 9.492217894140361900, -95.07596123493895800, 16.42628942631347400 ) ) ; +#2549 = CARTESIAN_POINT ( 'NONE', ( 36.08932287097243800, -19.52088447664843700, 14.73792407261808000 ) ) ; +#2550 = CARTESIAN_POINT ( 'NONE', ( 37.39336454583971700, -20.05966644997139900, -13.63582778139756400 ) ) ; +#2551 = CARTESIAN_POINT ( 'NONE', ( 2.139861088929264600, -11.92116105089450400, -18.99958138571729500 ) ) ; +#2552 = CARTESIAN_POINT ( 'NONE', ( 9.233536241953714800, -30.52102054478036300, 27.25911787060964600 ) ) ; +#2553 = CARTESIAN_POINT ( 'NONE', ( 35.30516801806975000, -29.24212144985302700, 23.98101873389306200 ) ) ; +#2554 = ORIENTED_EDGE ( 'NONE', *, *, #4261, .T. ) ; +#2555 = AXIS2_PLACEMENT_3D ( 'NONE', #6387, #8667, #880 ) ; +#2556 = CARTESIAN_POINT ( 'NONE', ( 37.79857499844719400, -18.80570000621109400, 7.861549626075556900 ) ) ; +#2557 = ADVANCED_FACE ( 'NONE', ( #12799 ), #13125, .F. ) ; +#2558 = CARTESIAN_POINT ( 'NONE', ( 10.77699197907463000, -20.08180227135771300, 21.63643882791314600 ) ) ; +#2559 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000464700, -26.90723187386105800, 7.764637101484187700 ) ) ; +#2560 = CARTESIAN_POINT ( 'NONE', ( 5.779817090441918400, -30.33780728596959600, 25.38530167723299900 ) ) ; +#2561 = CARTESIAN_POINT ( 'NONE', ( 24.53947947474854600, -24.21390380446450800, 19.82996723268984200 ) ) ; +#2562 = CARTESIAN_POINT ( 'NONE', ( 1.961938458726335100, -10.00000000000000000, -23.10465787550242200 ) ) ; +#2563 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -2.081668171172168500E-015 ) ) ; +#2564 = EDGE_CURVE ( 'NONE', #5671, #12598, #9638, .T. ) ; +#2565 = CARTESIAN_POINT ( 'NONE', ( 2.963007302155937300, -30.08813075903736900, 22.42443654159740900 ) ) ; +#2566 = ORIENTED_EDGE ( 'NONE', *, *, #13326, .T. ) ; +#2567 = CARTESIAN_POINT ( 'NONE', ( 31.26392580239266300, -30.49922598108776800, 27.04614375587452500 ) ) ; +#2568 = CARTESIAN_POINT ( 'NONE', ( 15.99683048350914700, -27.99874171311341100, 27.44664573132063600 ) ) ; +#2569 = CARTESIAN_POINT ( 'NONE', ( 7.334436914776508100, -29.98258792043626600, 26.29014849328453000 ) ) ; +#2570 = CARTESIAN_POINT ( 'NONE', ( 36.81468894922351600, -29.09645334368688900, 22.01788044132138500 ) ) ; +#2571 = CARTESIAN_POINT ( 'NONE', ( 5.415842926500907600, -100.0000000000000100, -2.818161743892670900 ) ) ; +#2572 = CARTESIAN_POINT ( 'NONE', ( 36.53930815959842000, -23.48533704399221400, 12.81403097001325600 ) ) ; +#2573 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#2574 = CARTESIAN_POINT ( 'NONE', ( 11.16271934695358300, -30.83581715467209200, 27.90612350710429400 ) ) ; +#2575 = CARTESIAN_POINT ( 'NONE', ( 4.051720647936046600, -29.87665204644712000, 23.89009989395024600 ) ) ; +#2576 = CARTESIAN_POINT ( 'NONE', ( 2.500000000003970600, -94.55878877203402100, 14.57694566794930900 ) ) ; +#2577 = CARTESIAN_POINT ( 'NONE', ( 10.72830474447043900, -10.53082735409734600, -25.03559597671571500 ) ) ; +#2578 = CIRCLE ( 'NONE', #5826, 1.200000000000003100 ) ; +#2579 = CARTESIAN_POINT ( 'NONE', ( 12.25283757708584200, -28.11072535569235600, 26.76382095128911600 ) ) ; +#2580 = CARTESIAN_POINT ( 'NONE', ( 27.01587966941551500, -20.88130018894649000, -23.55920031607790200 ) ) ; +#2581 = CARTESIAN_POINT ( 'NONE', ( 31.75616772173477600, -12.53173373195379800, -24.59741042816932600 ) ) ; +#2582 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13190, #12076, #14279, #7618, #966, #8755 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 8.675664558293343400E-019, 0.001064270059160670300, 0.002128540118321339700 ), + .UNSPECIFIED. ) ; +#2583 = VERTEX_POINT ( 'NONE', #12776 ) ; +#2584 = CARTESIAN_POINT ( 'NONE', ( 24.27339957291530600, -12.50000000000000000, 9.380817803345294700 ) ) ; +#2585 = EDGE_CURVE ( 'NONE', #8587, #2805, #12645, .T. ) ; +#2586 = CARTESIAN_POINT ( 'NONE', ( 33.29805689128986000, -30.35897398685037300, 25.99567369443541400 ) ) ; +#2587 = CARTESIAN_POINT ( 'NONE', ( 11.16307498637219100, -30.82715822949898100, 27.90775392060141200 ) ) ; +#2588 = CARTESIAN_POINT ( 'NONE', ( 15.23241733758731400, -19.96108144108384200, 23.07719931538185400 ) ) ; +#2589 = CARTESIAN_POINT ( 'NONE', ( 5.812866474238961500, -12.49999999999933000, -15.01624501535775000 ) ) ; +#2590 = CARTESIAN_POINT ( 'NONE', ( 33.43606457776466800, -12.49999999999744900, -16.56382714953629400 ) ) ; +#2591 = CIRCLE ( 'NONE', #2010, 3.189999999999994200 ) ; +#2592 = CARTESIAN_POINT ( 'NONE', ( 22.38779475281487300, -25.56940302422814800, 22.25469417330472100 ) ) ; +#2593 = CARTESIAN_POINT ( 'NONE', ( 27.95214325564883900, -95.07596123493894400, 16.25810049418895500 ) ) ; +#2594 = CARTESIAN_POINT ( 'NONE', ( 19.21346512545767700, -27.93250714223469400, 27.46301515907685300 ) ) ; +#2595 = CARTESIAN_POINT ( 'NONE', ( 15.06542282007541900, -94.71789415300038700, 18.69245526010967100 ) ) ; +#2596 = CARTESIAN_POINT ( 'NONE', ( 34.88401446484854100, -19.01785576014730900, 16.98822289075240700 ) ) ; +#2597 = VERTEX_POINT ( 'NONE', #11673 ) ; +#2598 = CARTESIAN_POINT ( 'NONE', ( 23.38675710623856900, -20.43438690969627900, -26.84921305636843400 ) ) ; +#2599 = CARTESIAN_POINT ( 'NONE', ( 9.340377300807732700, -30.98829038654826100, 27.20253319303890600 ) ) ; +#2600 = CARTESIAN_POINT ( 'NONE', ( 35.70562415859050300, -30.33718917325735400, 24.12937103341396000 ) ) ; +#2601 = CARTESIAN_POINT ( 'NONE', ( 17.68719383516401000, -30.65917406624153300, 28.85723021296909300 ) ) ; +#2602 = CARTESIAN_POINT ( 'NONE', ( 2.666324566380463300, -21.03937108353788300, 10.12525961712055200 ) ) ; +#2603 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -89.56735749795936400, 4.661075975869775500 ) ) ; +#2604 = CARTESIAN_POINT ( 'NONE', ( 6.006757192054029000, -29.49813918290414700, 25.24504356086844900 ) ) ; +#2605 = CARTESIAN_POINT ( 'NONE', ( 33.12298963690212600, -23.41504719478783900, 14.12608840651005500 ) ) ; +#2606 = CARTESIAN_POINT ( 'NONE', ( 6.025640296506493200, -12.33151289199033600, -23.38873684223364100 ) ) ; +#2607 = CARTESIAN_POINT ( 'NONE', ( 12.73336292262425900, -97.50632099824235900, 21.67706925112959100 ) ) ; +#2608 = CARTESIAN_POINT ( 'NONE', ( 0.6167956729360192200, -10.00000000000000000, -16.36489346375777700 ) ) ; +#2609 = ORIENTED_EDGE ( 'NONE', *, *, #5269, .T. ) ; +#2610 = CARTESIAN_POINT ( 'NONE', ( 3.775744324069031200, -29.00506246693308700, 22.61394929587168100 ) ) ; +#2611 = CARTESIAN_POINT ( 'NONE', ( 31.25714728654401100, -30.92567735337871700, 26.95585002782238600 ) ) ; +#2612 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561061017300, 6.640374750079693900, -20.68999999999999400 ) ) ; +#2613 = CARTESIAN_POINT ( 'NONE', ( 7.494460616776867000, -30.94093676892538300, 26.27940670586434600 ) ) ; +#2614 = CARTESIAN_POINT ( 'NONE', ( 37.12150400925538200, -30.24160557474324000, 21.81146038929634300 ) ) ; +#2615 = EDGE_LOOP ( 'NONE', ( #3573, #3740, #3910, #4721 ) ) ; +#2616 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3525, #10241, #5760, #13570 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0002170952677951547300 ), + .UNSPECIFIED. ) ; +#2617 = DIRECTION ( 'NONE', ( -0.9085756232452932800, 0.0000000000000000000, -0.4177204051089996600 ) ) ; +#2618 = CARTESIAN_POINT ( 'NONE', ( 4.677939748294291700, -30.99751532163214000, 23.54143713181902300 ) ) ; +#2619 = CARTESIAN_POINT ( 'NONE', ( 27.54747226146161800, -10.00000000000000000, 25.00000000000000000 ) ) ; +#2620 = ORIENTED_EDGE ( 'NONE', *, *, #8840, .F. ) ; +#2621 = CARTESIAN_POINT ( 'NONE', ( 9.620680910147351400, -11.24910223147654500, -24.99999999999999600 ) ) ; +#2622 = CARTESIAN_POINT ( 'NONE', ( 28.24752986018887000, -18.19172995701790500, -26.44442301009956600 ) ) ; +#2623 = ADVANCED_FACE ( 'NONE', ( #12618 ), #12459, .F. ) ; +#2624 = CARTESIAN_POINT ( 'NONE', ( 6.820742911811442400, -29.11719972694867700, 26.41444939641279200 ) ) ; +#2625 = CARTESIAN_POINT ( 'NONE', ( 25.76869862355670200, -12.50000000000013900, -22.50611427613647900 ) ) ; +#2626 = EDGE_CURVE ( 'NONE', #14178, #10174, #12468, .T. ) ; +#2627 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2628 = ORIENTED_EDGE ( 'NONE', *, *, #14171, .T. ) ; +#2629 = CARTESIAN_POINT ( 'NONE', ( 32.74958228480522800, -23.49231756807947800, 14.67998103970755100 ) ) ; +#2630 = CARTESIAN_POINT ( 'NONE', ( 33.18093196243738400, -31.11995811021764900, 25.68369045334789600 ) ) ; +#2631 = CARTESIAN_POINT ( 'NONE', ( 11.16295919418295000, -30.81210960147709700, 27.91037366505075900 ) ) ; +#2632 = CARTESIAN_POINT ( 'NONE', ( 17.23250250389370200, -19.18566171695111000, 23.41733732622581200 ) ) ; +#2633 = CARTESIAN_POINT ( 'NONE', ( 15.05081521631846500, -12.49999999999998600, -12.48995175768612900 ) ) ; +#2634 = CARTESIAN_POINT ( 'NONE', ( 34.95985796070263500, -22.35841242388554700, -12.98984874581380700 ) ) ; +#2635 = CARTESIAN_POINT ( 'NONE', ( 24.69347611746357200, -12.49999999999994500, -13.20961667352304900 ) ) ; +#2636 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6126, #13934, #632, #8407, #1725, #9535 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001064270059160668500, 0.002128540118321337000 ), + .UNSPECIFIED. ) ; +#2637 = VERTEX_POINT ( 'NONE', #14077 ) ; +#2638 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -19.87270537885228100, 23.25917566912282200 ) ) ; +#2639 = CARTESIAN_POINT ( 'NONE', ( 30.72611621399767000, -95.07596123493894400, 16.33556747316039900 ) ) ; +#2640 = CARTESIAN_POINT ( 'NONE', ( 33.41657368612824500, -20.35262065966198700, 18.40120596913622800 ) ) ; +#2641 = ORIENTED_EDGE ( 'NONE', *, *, #11734, .F. ) ; +#2642 = CARTESIAN_POINT ( 'NONE', ( 12.21548573301615400, -11.54580529365696200, 24.55311395230049600 ) ) ; +#2643 = CARTESIAN_POINT ( 'NONE', ( 9.328828232014361200, -30.66135729790032400, 27.28746379562764100 ) ) ; +#2644 = CARTESIAN_POINT ( 'NONE', ( 35.16662774656126100, -29.19809059934991100, 24.05131696290297300 ) ) ; +#2645 = CARTESIAN_POINT ( 'NONE', ( 17.64524060905969400, -30.65997548273784500, 28.85708890161800600 ) ) ; +#2646 = EDGE_CURVE ( 'NONE', #8198, #6332, #12512, .T. ) ; +#2647 = ORIENTED_EDGE ( 'NONE', *, *, #4196, .T. ) ; +#2648 = PLANE ( 'NONE', #4041 ) ; +#2649 = CARTESIAN_POINT ( 'NONE', ( 36.46353132733843000, -93.73150234348131000, 4.754760668154429700 ) ) ; +#2650 = CARTESIAN_POINT ( 'NONE', ( 6.068572871741605600, -30.57871103375406500, 25.51748386179465600 ) ) ; +#2651 = CARTESIAN_POINT ( 'NONE', ( 34.99874054230837600, -22.52827200099723400, 7.769066497182370400 ) ) ; +#2652 = CARTESIAN_POINT ( 'NONE', ( 16.02688335222926200, -12.50000000000001200, 9.646914386809639200 ) ) ; +#2653 = CARTESIAN_POINT ( 'NONE', ( 9.079299625275984600, -10.00000000000691900, -24.79482703626550600 ) ) ; +#2654 = CARTESIAN_POINT ( 'NONE', ( 16.58415945740647500, -19.92294704756447000, 23.22753539296030200 ) ) ; +#2655 = CARTESIAN_POINT ( 'NONE', ( 6.561018263311320100, -20.29853308935247100, -22.05873839000867400 ) ) ; +#2656 = ORIENTED_EDGE ( 'NONE', *, *, #3119, .F. ) ; +#2657 = CARTESIAN_POINT ( 'NONE', ( 3.498549376400941200, -30.51966540907439200, 22.55863951160535700 ) ) ; +#2658 = CIRCLE ( 'NONE', #1383, 2.500000000000000900 ) ; +#2659 = CARTESIAN_POINT ( 'NONE', ( 31.05495561098516100, -30.36198647213209200, 27.13511726259668000 ) ) ; +#2660 = CARTESIAN_POINT ( 'NONE', ( 6.055316589669236500, -18.55890617774655000, -22.08227871658221600 ) ) ; +#2661 = CARTESIAN_POINT ( 'NONE', ( 7.472545289688681300, -30.30550173765022100, 26.42951891545125800 ) ) ; +#2662 = CARTESIAN_POINT ( 'NONE', ( 36.35401984383005900, -28.93523976718147800, 22.21964592890727600 ) ) ; +#2663 = ORIENTED_EDGE ( 'NONE', *, *, #6654, .T. ) ; +#2664 = EDGE_CURVE ( 'NONE', #10174, #283, #13102, .T. ) ; +#2665 = CARTESIAN_POINT ( 'NONE', ( 4.189904743022097500, -30.19276985394129300, 24.07260569517098100 ) ) ; +#2666 = LINE ( 'NONE', #1111, #2164 ) ; +#2667 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 18.70000000000001400 ) ) ; +#2668 = EDGE_LOOP ( 'NONE', ( #6470, #10002, #11946, #1572 ) ) ; +#2669 = CARTESIAN_POINT ( 'NONE', ( 9.470323860921652700, -12.60716440412529900, -25.00000000000000000 ) ) ; +#2670 = FACE_OUTER_BOUND ( 'NONE', #10935, .T. ) ; +#2671 = CARTESIAN_POINT ( 'NONE', ( 17.64039441766889400, -33.35446909076587500, 26.50697697917619800 ) ) ; +#2672 = CARTESIAN_POINT ( 'NONE', ( 24.27215259724489400, -18.79492559333798600, -26.55078267542883100 ) ) ; +#2673 = CARTESIAN_POINT ( 'NONE', ( 4.234989213165304600, -31.26328882408430200, 24.40521221712669600 ) ) ; +#2674 = CARTESIAN_POINT ( 'NONE', ( 23.15980436249368100, -12.50000000000000200, -14.45850368210779300 ) ) ; +#2675 = CARTESIAN_POINT ( 'NONE', ( 34.33658667204386500, -19.04491158046606700, 17.70525723318235100 ) ) ; +#2676 = CARTESIAN_POINT ( 'NONE', ( 34.43374641662832400, -12.49999999999987900, 13.49065050544575900 ) ) ; +#2677 = CARTESIAN_POINT ( 'NONE', ( 33.07159524255401100, -30.09890328976106800, 26.09603446330486400 ) ) ; +#2678 = CARTESIAN_POINT ( 'NONE', ( 3.171047629037073300, -31.68329557903566900, 10.47399332742113400 ) ) ; +#2679 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000000, 27.93780948130460100 ) ) ; +#2680 = CARTESIAN_POINT ( 'NONE', ( 39.92214158203962200, 10.13070237256533300, 16.79023454383173300 ) ) ; +#2681 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -22.49999999999997900, -11.97268808056956700 ) ) ; +#2682 = CARTESIAN_POINT ( 'NONE', ( 29.12472062893466400, -21.02792026637016700, -22.51748420245758800 ) ) ; +#2683 = CARTESIAN_POINT ( 'NONE', ( 32.76449705094876900, -21.51086407810348100, -19.06688725508708500 ) ) ; +#2684 = CIRCLE ( 'NONE', #440, 5.000000000000000900 ) ; +#2685 = ORIENTED_EDGE ( 'NONE', *, *, #4030, .F. ) ; +#2686 = CIRCLE ( 'NONE', #8095, 2.499999999999999100 ) ; +#2687 = CARTESIAN_POINT ( 'NONE', ( 35.14826201991139200, -94.71799171679177200, 15.10973067523281300 ) ) ; +#2688 = CARTESIAN_POINT ( 'NONE', ( 31.05689879920428700, -30.29727839978428600, 27.12861395059601900 ) ) ; +#2689 = CARTESIAN_POINT ( 'NONE', ( 5.781484463966917200, -99.99999999999998600, -30.08826940046392600 ) ) ; +#2690 = EDGE_CURVE ( 'NONE', #11427, #13647, #12995, .T. ) ; +#2691 = CARTESIAN_POINT ( 'NONE', ( 31.62649972311925900, -19.83590902322227500, 20.16469576240726300 ) ) ; +#2692 = ORIENTED_EDGE ( 'NONE', *, *, #13709, .F. ) ; +#2693 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.04517183358049700, 16.23828164246650700 ) ) ; +#2694 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -99.99999999999998600, -6.100827442047409100 ) ) ; +#2695 = CARTESIAN_POINT ( 'NONE', ( 9.638636406564538500, -30.98182729911613700, 27.33221565295908600 ) ) ; +#2696 = CARTESIAN_POINT ( 'NONE', ( 35.62211749735636300, -30.09188812148162400, 24.29389721559150000 ) ) ; +#2697 = CARTESIAN_POINT ( 'NONE', ( 39.90287534330132500, 10.19006527892301500, -17.85934566586511700 ) ) ; +#2698 = CARTESIAN_POINT ( 'NONE', ( 36.55287818322612700, -93.11137696449341700, 18.95373406131196600 ) ) ; +#2699 = CIRCLE ( 'NONE', #10246, 5.000000000000000900 ) ; +#2700 = ADVANCED_FACE ( 'NONE', ( #12456 ), #12324, .T. ) ; +#2701 = VERTEX_POINT ( 'NONE', #8657 ) ; +#2702 = DIRECTION ( 'NONE', ( -1.000000000000000000, 9.393726649260530000E-017, -5.327447116441166800E-016 ) ) ; +#2703 = CARTESIAN_POINT ( 'NONE', ( 35.15039562463994800, -10.01030339717063600, 22.66968200243135100 ) ) ; +#2704 = CARTESIAN_POINT ( 'NONE', ( 6.199750128947878900, -29.69828192120421300, 25.49509950455488300 ) ) ; +#2705 = CARTESIAN_POINT ( 'NONE', ( 39.52669618366879700, -11.89388180648989700, 7.855301990656281300 ) ) ; +#2706 = CARTESIAN_POINT ( 'NONE', ( 10.62287001083106100, -23.94864206077424700, 17.94050568149045000 ) ) ; +#2707 = CARTESIAN_POINT ( 'NONE', ( 26.73356823446567900, -13.77687010209033300, -25.66596410162963000 ) ) ; +#2708 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.723952627011010800, -1.698875742032555800 ) ) ; +#2709 = CARTESIAN_POINT ( 'NONE', ( 22.44908695588021500, -19.89671800198253500, 23.25498509240257100 ) ) ; +#2710 = VERTEX_POINT ( 'NONE', #1968 ) ; +#2711 = CARTESIAN_POINT ( 'NONE', ( 3.498476288220798500, -29.27464617934247900, 22.77510891799912700 ) ) ; +#2712 = CARTESIAN_POINT ( 'NONE', ( 2.567562949190188100E-006, -9.999999999999989300, 7.987624135541552500 ) ) ; +#2713 = EDGE_CURVE ( 'NONE', #13818, #2004, #6081, .T. ) ; +#2714 = CARTESIAN_POINT ( 'NONE', ( 31.06920871184842200, -30.75673133509831200, 27.09803521760420600 ) ) ; +#2715 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.980071900088896200E-016 ) ) ; +#2716 = CARTESIAN_POINT ( 'NONE', ( 7.902794581788048100, -31.11437118442181000, 26.41082731867280500 ) ) ; +#2717 = CARTESIAN_POINT ( 'NONE', ( 37.35888922034354200, -29.90696879652746900, 22.02330006323934000 ) ) ; +#2718 = CIRCLE ( 'NONE', #3240, 1.200000000000006600 ) ; +#2719 = CARTESIAN_POINT ( 'NONE', ( 4.676811999705027000, -29.16355574299765900, 23.86569601810700900 ) ) ; +#2720 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000108000, -9.999999999999003500, -14.29962114364720100 ) ) ; +#2721 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#2722 = ORIENTED_EDGE ( 'NONE', *, *, #10916, .F. ) ; +#2723 = CARTESIAN_POINT ( 'NONE', ( 37.34702776294340500, -13.13015780544108700, -19.39174776206808600 ) ) ; +#2724 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.00000000000000000, 25.00000000000000400 ) ) ; +#2725 = CARTESIAN_POINT ( 'NONE', ( 23.50510537881701000, -22.13224542265089000, -27.13924220459004400 ) ) ; +#2726 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000900, 16.30000000000000100 ) ) ; +#2727 = CARTESIAN_POINT ( 'NONE', ( 24.81742082275122400, -20.79377577370648600, -24.18296649188689100 ) ) ; +#2728 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524033600, 6.754920151478382100 ) ) ; +#2729 = CARTESIAN_POINT ( 'NONE', ( 24.79442579755356800, -12.50000000000005500, 8.587807193093807400 ) ) ; +#2730 = CARTESIAN_POINT ( 'NONE', ( 33.07159504220561500, -30.88035334409347900, 25.95825794154068000 ) ) ; +#2731 = CARTESIAN_POINT ( 'NONE', ( 2.499999999989484400, -27.69553506591502800, 7.787118573063891900 ) ) ; +#2732 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000300, 27.93780948130459100 ) ) ; +#2733 = CARTESIAN_POINT ( 'NONE', ( 28.78903414418227800, -22.35262247912813600, -25.78380832234273300 ) ) ; +#2734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2735 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#2736 = EDGE_CURVE ( 'NONE', #3707, #3340, #12308, .T. ) ; +#2737 = CARTESIAN_POINT ( 'NONE', ( 33.21042887781634100, -29.70883503951858300, 25.86890717703097700 ) ) ; +#2738 = CARTESIAN_POINT ( 'NONE', ( 13.42391054053097400, -99.99999999999998600, -37.70236617686629900 ) ) ; +#2739 = CARTESIAN_POINT ( 'NONE', ( 29.97129271868003600, -19.45657489264269900, 21.33837596788949800 ) ) ; +#2740 = CARTESIAN_POINT ( 'NONE', ( 37.10317668717731000, -20.93241312476771700, 11.42799798248766900 ) ) ; +#2741 = CARTESIAN_POINT ( 'NONE', ( 9.630237758048759000, -30.75186239672220600, 27.39478705090147100 ) ) ; +#2742 = CARTESIAN_POINT ( 'NONE', ( 35.18555289924906000, -31.00881366426784100, 23.74868226037856900 ) ) ; +#2743 = CARTESIAN_POINT ( 'NONE', ( 30.77270497233604400, -97.48437145495371700, 20.81752712022409200 ) ) ; +#2744 = DIRECTION ( 'NONE', ( -0.01909913463759062600, 0.9998175948922358700, 0.0000000000000000000 ) ) ; +#2745 = CARTESIAN_POINT ( 'NONE', ( 4.294959126319488600, -22.44734358313767700, 14.81051053880072200 ) ) ; +#2746 = CARTESIAN_POINT ( 'NONE', ( 30.48951945653090300, -8.559457340231190900, 25.00000000000000000 ) ) ; +#2747 = CARTESIAN_POINT ( 'NONE', ( 6.233655387681341000, -30.91770048815801500, 25.41909677528194300 ) ) ; +#2748 = ORIENTED_EDGE ( 'NONE', *, *, #6676, .T. ) ; +#2749 = CARTESIAN_POINT ( 'NONE', ( 39.99999743243567700, -9.999999999999955600, 7.987624124154066900 ) ) ; +#2750 = CARTESIAN_POINT ( 'NONE', ( 10.40228614256688500, -12.49999999999942400, 19.86162603877829000 ) ) ; +#2751 = PLANE ( 'NONE', #10856 ) ; +#2752 = CARTESIAN_POINT ( 'NONE', ( 39.92214158203962900, 10.13070237256533600, -0.7097654561682703600 ) ) ; +#2753 = EDGE_CURVE ( 'NONE', #4109, #13825, #12441, .T. ) ; +#2754 = CARTESIAN_POINT ( 'NONE', ( 0.4741480234562116000, -11.89343592613438700, 8.162921456888751600 ) ) ; +#2755 = CARTESIAN_POINT ( 'NONE', ( 30.95181702681565400, -30.32522346130765800, 27.17624454831695100 ) ) ; +#2756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2757 = CARTESIAN_POINT ( 'NONE', ( 7.845990713173737400, -30.54611148866721500, 26.61789811429062900 ) ) ; +#2758 = CARTESIAN_POINT ( 'NONE', ( 36.32311189125560700, -30.66072386170907300, 21.91663978396627100 ) ) ; +#2759 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3345, #5480, #12298, #5574, #13400, #6710, #109, #7848, #1200, #8986, #2285, #10112 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003579442175721859800, 0.007158884351443719500, 0.008948605439304650000, 0.01073832652716558000, 0.01431776870288743900 ), + .UNSPECIFIED. ) ; +#2760 = CARTESIAN_POINT ( 'NONE', ( 3.756867239339731300, -97.42181713028752200, 18.37434326604868700 ) ) ; +#2761 = ORIENTED_EDGE ( 'NONE', *, *, #6452, .T. ) ; +#2762 = CARTESIAN_POINT ( 'NONE', ( 4.344785179366057900, -30.49015008542554400, 24.05864816045294000 ) ) ; +#2763 = CARTESIAN_POINT ( 'NONE', ( 17.64545145376410000, -32.13578828253771700, 21.09686328653844700 ) ) ; +#2764 = CARTESIAN_POINT ( 'NONE', ( 39.54270527157969200, -11.10684444092025600, 11.50390284033232600 ) ) ; +#2765 = CARTESIAN_POINT ( 'NONE', ( 34.92051596316366600, -22.03500000000001400, 9.298858046709481700 ) ) ; +#2766 = CARTESIAN_POINT ( 'NONE', ( 29.55501774885237900, -30.77742235799891200, 27.68824407482067300 ) ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 36.24309991432517100, -100.0000000000000700, 17.91936059322280200 ) ) ; +#2768 = CARTESIAN_POINT ( 'NONE', ( 13.15273288870218100, -28.08123352512510000, 26.96594673378285400 ) ) ; +#2769 = ADVANCED_FACE ( 'NONE', ( #12659 ), #2923, .F. ) ; +#2770 = CARTESIAN_POINT ( 'NONE', ( 22.56123850041398900, -19.88642326305406600, 23.25678856832246000 ) ) ; +#2771 = CARTESIAN_POINT ( 'NONE', ( 23.80698159428322200, -12.50000000000023600, -22.87392338649423000 ) ) ; +#2772 = CARTESIAN_POINT ( 'NONE', ( 36.68270473173930000, -28.86033334487857600, 21.17145047251918700 ) ) ; +#2773 = CIRCLE ( 'NONE', #3466, 2.500000000000000000 ) ; +#2774 = CARTESIAN_POINT ( 'NONE', ( 34.08071235650989900, -23.15185691150911800, 12.24163753791429700 ) ) ; +#2775 = EDGE_CURVE ( 'NONE', #2348, #8416, #12176, .T. ) ; +#2776 = CARTESIAN_POINT ( 'NONE', ( 32.91794660631423900, -29.84947674253378100, 26.10175764101164800 ) ) ; +#2777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2778 = VERTEX_POINT ( 'NONE', #5330 ) ; +#2779 = CARTESIAN_POINT ( 'NONE', ( 36.73855852854510600, -21.62752752877642600, -16.63521052830716600 ) ) ; +#2780 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999997900, -97.26513044191133900, 8.543726478552399000 ) ) ; +#2781 = CARTESIAN_POINT ( 'NONE', ( 35.15585628962293200, -29.20070228373916500, 24.06408260386864800 ) ) ; +#2782 = CARTESIAN_POINT ( 'NONE', ( 36.42420708896028700, -26.22580756748617100, 6.815655241949632300 ) ) ; +#2783 = CARTESIAN_POINT ( 'NONE', ( 28.65616682155387100, -19.15000184941039800, 22.10196823096841700 ) ) ; +#2784 = CARTESIAN_POINT ( 'NONE', ( 28.41592982851893700, -20.04945101296195300, 22.02167587370603700 ) ) ; +#2785 = CARTESIAN_POINT ( 'NONE', ( 9.638208050668991300, -30.48079240582339400, 27.42167315865449600 ) ) ; +#2786 = CARTESIAN_POINT ( 'NONE', ( 35.50400465072328900, -29.76439927311498900, 24.28616044599261800 ) ) ; +#2787 = VERTEX_POINT ( 'NONE', #10957 ) ; +#2788 = CARTESIAN_POINT ( 'NONE', ( 35.65446757497607400, -94.75143542371311900, 8.444143851988165700 ) ) ; +#2789 = CARTESIAN_POINT ( 'NONE', ( 24.58722976564460800, -94.74615160633266000, 18.64596703650919100 ) ) ; +#2790 = EDGE_CURVE ( 'NONE', #13456, #7556, #9162, .T. ) ; +#2791 = CARTESIAN_POINT ( 'NONE', ( 28.50023780093116300, -11.20635047078884100, 24.48259622481700500 ) ) ; +#2792 = CARTESIAN_POINT ( 'NONE', ( 13.08600475226273500, -20.06672754409562700, 22.55858813462629400 ) ) ; +#2793 = CARTESIAN_POINT ( 'NONE', ( 27.90882475885393200, -10.70508120317688800, 25.00000000000000000 ) ) ; +#2794 = CARTESIAN_POINT ( 'NONE', ( 6.185341081256979100, -30.07983213706233300, 25.63363325105810000 ) ) ; +#2795 = VERTEX_POINT ( 'NONE', #12053 ) ; +#2796 = CARTESIAN_POINT ( 'NONE', ( 41.95104112610398100, -10.00000000000000500, 8.187452415478244200 ) ) ; +#2797 = CARTESIAN_POINT ( 'NONE', ( 16.53844435520796800, -12.50000000000000500, 9.943322588430985900 ) ) ; +#2798 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #8832, #2130, #9952 ), + ( #3241, #11083, #4358 ), + ( #12192, #5463, #13299 ), + ( #6595, #14392, #7736 ), + ( #1084, #8876, #2176 ), + ( #9996, #3283, #11130 ), + ( #4400, #12233, #5504 ), + ( #13345, #6640, #47 ), + ( #7786, #1132, #8919 ), + ( #2221, #10041, #3329 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.005162979489315677200, 0.007859573768639088000, 0.01055616804796250000, 0.01325276232728591100, 0.01594935660660932300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9676001028546373800, 1.000000000000000000), + ( 1.000000000000000000, 0.9620953161855682100, 1.000000000000000000), + ( 1.000000000000000000, 0.9518115081736514500, 1.000000000000000000), + ( 1.000000000000000000, 0.9234589674613350500, 1.000000000000000000), + ( 1.000000000000000000, 0.9054174605443561200, 1.000000000000000000), + ( 1.000000000000000000, 0.8631041838805688600, 1.000000000000000000), + ( 1.000000000000000000, 0.8388622249580496300, 1.000000000000000000), + ( 1.000000000000000000, 0.7852944955339981000, 1.000000000000000000), + ( 1.000000000000000000, 0.7562610911747611500, 1.000000000000000000), + ( 1.000000000000000000, 0.7258093592940149100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2799 = CARTESIAN_POINT ( 'NONE', ( 12.98375190836393000, -11.08464232241701100, 24.80874829413960100 ) ) ; +#2800 = CARTESIAN_POINT ( 'NONE', ( -1.860894793443912400, -9.999999999999994700, 9.962034924335441100 ) ) ; +#2801 = CARTESIAN_POINT ( 'NONE', ( 30.97098148772472800, -30.67407766586997300, 27.15868211976352600 ) ) ; +#2802 = CARTESIAN_POINT ( 'NONE', ( 11.88312843016617000, -20.15316442967260400, 22.10864104136963700 ) ) ; +#2803 = CARTESIAN_POINT ( 'NONE', ( 7.905646864787583700, -30.01797762364080700, 26.59879217756240200 ) ) ; +#2804 = CARTESIAN_POINT ( 'NONE', ( 37.24366862322096200, -29.57833913519668600, 22.19428039737315600 ) ) ; +#2805 = VERTEX_POINT ( 'NONE', #11001 ) ; +#2806 = CARTESIAN_POINT ( 'NONE', ( 4.588756091762614500, -29.38403371238548100, 24.04576190099129500 ) ) ; +#2807 = CARTESIAN_POINT ( 'NONE', ( 11.93071555306667400, -33.04097291147005000, 27.70512374658207800 ) ) ; +#2808 = CARTESIAN_POINT ( 'NONE', ( 37.50864204707209400, -90.02697877896078200, -3.483023999301652700 ) ) ; +#2809 = CARTESIAN_POINT ( 'NONE', ( 38.79744755935284000, -10.44131184520647100, 15.83433742277992300 ) ) ; +#2810 = CARTESIAN_POINT ( 'NONE', ( 33.37584989280667000, -100.0000000000000100, 0.2290708660672453000 ) ) ; +#2811 = CARTESIAN_POINT ( 'NONE', ( 29.55554371409963800, -30.90267284301738100, 27.66118433668271900 ) ) ; +#2812 = CARTESIAN_POINT ( 'NONE', ( 31.41056608381879300, -100.0000000000000700, 20.15028419018139900 ) ) ; +#2813 = ORIENTED_EDGE ( 'NONE', *, *, #3328, .F. ) ; +#2814 = EDGE_CURVE ( 'NONE', #5991, #2805, #12139, .T. ) ; +#2815 = CARTESIAN_POINT ( 'NONE', ( 34.91143484813208200, -12.49999999999919700, 11.66040253787137200 ) ) ; +#2816 = CARTESIAN_POINT ( 'NONE', ( 33.01839174907446100, -30.62368813028281900, 26.12393398888689300 ) ) ; +#2817 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438938600, 7.000000000000000900, 20.69000000000000100 ) ) ; +#2818 = ORIENTED_EDGE ( 'NONE', *, *, #7041, .T. ) ; +#2819 = CARTESIAN_POINT ( 'NONE', ( 28.39706671129922100, -9.994244498425807400, -25.00000000000388300 ) ) ; +#2820 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 8.200000000000013500, -17.49999999999999600 ) ) ; +#2821 = CARTESIAN_POINT ( 'NONE', ( 16.76217005600349100, -12.50000000000087800, -22.92483851885571200 ) ) ; +#2822 = CARTESIAN_POINT ( 'NONE', ( 16.33707368133799800, -19.18949841699703600, 23.36467695346054900 ) ) ; +#2823 = CARTESIAN_POINT ( 'NONE', ( 35.92128758580643900, -29.02012094633075300, 23.01170876573452500 ) ) ; +#2824 = CARTESIAN_POINT ( 'NONE', ( 9.808789910778903800, -99.99999999999998600, 20.53078478538790100 ) ) ; +#2825 = ORIENTED_EDGE ( 'NONE', *, *, #2753, .F. ) ; +#2826 = CARTESIAN_POINT ( 'NONE', ( 26.72080237794040900, -19.99912669265636500, 22.62145069200396800 ) ) ; +#2827 = CARTESIAN_POINT ( 'NONE', ( 32.67282258055102100, -94.72975613659636500, 16.45072930267863500 ) ) ; +#2828 = CARTESIAN_POINT ( 'NONE', ( 25.03003990485839100, -19.96530868863710900, 23.02462227818016400 ) ) ; +#2829 = CARTESIAN_POINT ( 'NONE', ( 9.833827129607959300, -30.83162161076409500, 27.45574801320970300 ) ) ; +#2830 = CARTESIAN_POINT ( 'NONE', ( 35.37993237170932300, -30.77111865761673900, 23.99893485378374400 ) ) ; +#2831 = ORIENTED_EDGE ( 'NONE', *, *, #8696, .F. ) ; +#2832 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -95.78490438491772400, 4.330279031978125900 ) ) ; +#2833 = EDGE_CURVE ( 'NONE', #1097, #1999, #12156, .T. ) ; +#2834 = CARTESIAN_POINT ( 'NONE', ( 2.201425001453300600, -18.80570000581306200, 7.788262581895413200 ) ) ; +#2835 = LINE ( 'NONE', #5594, #2545 ) ; +#2836 = ADVANCED_FACE ( 'NONE', ( #12291 ), #872, .F. ) ; +#2837 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #6068, #2767 ), + ( #3887, #11720 ), + ( #4987, #12830 ), + ( #6114, #13922 ), + ( #7247, #622 ), + ( #8398, #1717 ), + ( #9523, #2812 ), + ( #10654, #3934 ), + ( #11769, #5034 ), + ( #12880, #6165 ), + ( #13974, #7291 ), + ( #669, #8447 ), + ( #1762, #9568 ), + ( #2863, #10697 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 2, 2 ), + ( 0.6684358329217818800, 0.6875000000000000000, 0.7500000000000000000, 0.8125000000000001100, 0.8437500000000000000, 0.8749999999999997800, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#2838 = CARTESIAN_POINT ( 'NONE', ( 2.500004660460783500, -21.23893052403447300, 7.774867438658537500 ) ) ; +#2839 = CARTESIAN_POINT ( 'NONE', ( 5.474808194957755200, -94.72210163403924800, 15.44587895064602300 ) ) ; +#2840 = CARTESIAN_POINT ( 'NONE', ( 6.490018013820284500, -31.15048941084921500, 25.39123985236423000 ) ) ; +#2841 = CARTESIAN_POINT ( 'NONE', ( 39.44717428741712700, -11.89127445162177600, 9.722292266071882200 ) ) ; +#2842 = ORIENTED_EDGE ( 'NONE', *, *, #6699, .T. ) ; +#2843 = CARTESIAN_POINT ( 'NONE', ( 12.98412033059374500, -24.11869981105413500, 19.15102579837011000 ) ) ; +#2844 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.630640067418201200E-014, -2.875258397100878600E-015 ) ) ; +#2845 = CARTESIAN_POINT ( 'NONE', ( 0.5860706589459360200, -9.999999999999998200, 12.59045557656467900 ) ) ; +#2846 = LINE ( 'NONE', #1340, #2022 ) ; +#2847 = ORIENTED_EDGE ( 'NONE', *, *, #7830, .T. ) ; +#2848 = CARTESIAN_POINT ( 'NONE', ( 30.95186989928174300, -31.03663546484848700, 27.05092797237072900 ) ) ; +#2849 = FACE_OUTER_BOUND ( 'NONE', #13080, .T. ) ; +#2850 = CARTESIAN_POINT ( 'NONE', ( 5.485328789540365500, -28.83242424160942400, 24.67659536212216400 ) ) ; +#2851 = CARTESIAN_POINT ( 'NONE', ( 8.043402740046760300, -30.69554222357319500, 26.68782056738804400 ) ) ; +#2852 = CARTESIAN_POINT ( 'NONE', ( 36.36353714231808000, -30.64966964202025700, 22.01918802020567900 ) ) ; +#2853 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -97.57596123255582700, 10.74922904676143400 ) ) ; +#2854 = VERTEX_POINT ( 'NONE', #10417 ) ; +#2855 = EDGE_CURVE ( 'NONE', #10086, #1758, #12129, .T. ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( 4.679971495441084700, -30.86456209303466000, 23.89193513312202600 ) ) ; +#2857 = CARTESIAN_POINT ( 'NONE', ( 11.00125302872869800, -38.65132533478156100, 18.45418769069322100 ) ) ; +#2858 = CARTESIAN_POINT ( 'NONE', ( 39.91969583976727900, -95.07596123493894400, 5.716033726919755900 ) ) ; +#2859 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2860 = CARTESIAN_POINT ( 'NONE', ( 29.16022420043981000, -22.03500000000001400, 18.42823962235078000 ) ) ; +#2861 = FACE_OUTER_BOUND ( 'NONE', #11092, .T. ) ; +#2862 = CARTESIAN_POINT ( 'NONE', ( 29.24740760043661300, -30.77521751312609800, 27.78941448579394100 ) ) ; +#2863 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -97.40649683660852500, 22.08787631849741800 ) ) ; +#2864 = CARTESIAN_POINT ( 'NONE', ( 0.03852496934829596800, 7.709566240879363300, 20.63077328774388900 ) ) ; +#2865 = CARTESIAN_POINT ( 'NONE', ( 28.01512580115776200, -10.15232558920127000, 24.97314088877150700 ) ) ; +#2866 = ORIENTED_EDGE ( 'NONE', *, *, #7538, .F. ) ; +#2867 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141211300, -30.55092223628113500, 21.46123905850134900 ) ) ; +#2868 = CARTESIAN_POINT ( 'NONE', ( 3.519598352619284700, -30.53877885498329200, 21.46298915216608400 ) ) ; +#2869 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, -40.86942826376123600 ) ) ; +#2870 = CARTESIAN_POINT ( 'NONE', ( 24.89168109245067800, -12.50000000000001200, 8.314805415287549900 ) ) ; +#2871 = CARTESIAN_POINT ( 'NONE', ( 32.63864618388335300, -29.86712180032174000, 26.26609426003821200 ) ) ; +#2872 = CARTESIAN_POINT ( 'NONE', ( 2.858001648764288700, -27.64929233276498600, 6.564658817722296600 ) ) ; +#2873 = CARTESIAN_POINT ( 'NONE', ( 29.38146933447346500, -10.09467122769742500, -24.99999999999999300 ) ) ; +#2874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#2875 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -97.35825960981910000, 15.16559051180060000 ) ) ; +#2876 = CARTESIAN_POINT ( 'NONE', ( 17.04623845006147000, -12.49999999999998600, -14.50734980546153200 ) ) ; +#2877 = CIRCLE ( 'NONE', #10058, 2.499999999999998700 ) ; +#2878 = CARTESIAN_POINT ( 'NONE', ( 13.53280035302858600, -14.47140579286036300, 24.12963949323597700 ) ) ; +#2879 = CARTESIAN_POINT ( 'NONE', ( 36.23710644047795200, -28.94559623271462800, 22.42208565558163600 ) ) ; +#2880 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.00000000000000000, 0.0000000000000000000 ) ) ; +#2881 = EDGE_LOOP ( 'NONE', ( #10986, #8699, #9030, #6407, #5306, #12148 ) ) ; +#2882 = CARTESIAN_POINT ( 'NONE', ( 25.26915955322036200, -19.70311867972806000, 23.02727916569725900 ) ) ; +#2883 = CARTESIAN_POINT ( 'NONE', ( 16.86018890795401500, -12.49999999999999300, 10.05588234368353500 ) ) ; +#2884 = CARTESIAN_POINT ( 'NONE', ( -2.406928822917820200E-014, -9.878887755046157800, 20.09899844734904300 ) ) ; +#2885 = CARTESIAN_POINT ( 'NONE', ( 2.201604286630114900, -18.80694826461780200, -11.70378783570186900 ) ) ; +#2886 = CARTESIAN_POINT ( 'NONE', ( 9.835157386624038300, -30.60297593486043200, 27.49187929823275300 ) ) ; +#2887 = CARTESIAN_POINT ( 'NONE', ( 35.11673311030791900, -29.38654008521609000, 24.30431561002399800 ) ) ; +#2888 = CARTESIAN_POINT ( 'NONE', ( 7.692077258178897200, -12.49999999999999800, 17.34792341076184700 ) ) ; +#2889 = EDGE_LOOP ( 'NONE', ( #11085, #8307, #11580, #9136 ) ) ; +#2890 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -91.58528500546601900, -1.725079236352190700 ) ) ; +#2891 = CARTESIAN_POINT ( 'NONE', ( 2.961786862531557800, -18.92239706001707200, 12.69159433368060900 ) ) ; +#2892 = CARTESIAN_POINT ( 'NONE', ( 2.198002975955158700, -18.79481377358225200, 7.891588103975847100 ) ) ; +#2893 = CARTESIAN_POINT ( 'NONE', ( 6.333055850685133800, -30.37280118054748700, 25.75399052863368600 ) ) ; +#2894 = CARTESIAN_POINT ( 'NONE', ( 34.59976887545835900, -18.57849628792039800, -21.27802115573840100 ) ) ; +#2895 = LINE ( 'NONE', #4176, #3532 ) ; +#2896 = CARTESIAN_POINT ( 'NONE', ( 39.41392252688542200, -10.00000000000000000, 12.59048081543679700 ) ) ; +#2897 = CARTESIAN_POINT ( 'NONE', ( 15.80584760665877700, -18.68346959635380600, 23.44608642135689900 ) ) ; +#2898 = CARTESIAN_POINT ( 'NONE', ( 13.19207874397094400, -12.50000000000004400, 21.29587483871641100 ) ) ; +#2899 = CARTESIAN_POINT ( 'NONE', ( 30.21513839476101300, -12.66549609558552400, -25.08649169343632600 ) ) ; +#2900 = CARTESIAN_POINT ( 'NONE', ( 2.593373052307466100, -18.72241263594683100, -15.26655400653874000 ) ) ; +#2901 = CARTESIAN_POINT ( 'NONE', ( 2.782389040036833200, -11.88312035652245400, 16.73949456219812900 ) ) ; +#2902 = EDGE_CURVE ( 'NONE', #7285, #11692, #3979, .T. ) ; +#2903 = DIRECTION ( 'NONE', ( -6.938893903907221500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2904 = ORIENTED_EDGE ( 'NONE', *, *, #12917, .T. ) ; +#2905 = CARTESIAN_POINT ( 'NONE', ( 30.76994385912473400, -30.59961558444153700, 27.25348250872663800 ) ) ; +#2906 = CARTESIAN_POINT ( 'NONE', ( 7.783528449040564300, -26.83656981075360200, 18.49338560846120300 ) ) ; +#2907 = CARTESIAN_POINT ( 'NONE', ( 8.085146291569143900, -30.10867730684038400, 26.70882526350747500 ) ) ; +#2908 = CARTESIAN_POINT ( 'NONE', ( 36.63531176619655100, -29.23724499610482000, 22.57097622220045400 ) ) ; +#2909 = EDGE_CURVE ( 'NONE', #4276, #9327, #9752, .T. ) ; +#2910 = CARTESIAN_POINT ( 'NONE', ( 4.064278364782021300, -94.44804360490597600, 7.170630477972799200 ) ) ; +#2911 = CARTESIAN_POINT ( 'NONE', ( 4.442707169166724600, -29.83783362721208800, 24.28139958597203900 ) ) ; +#2912 = CARTESIAN_POINT ( 'NONE', ( 9.274806190537962200, -31.45604376314817000, 18.78051005901004100 ) ) ; +#2913 = CARTESIAN_POINT ( 'NONE', ( 31.20231953152312700, -95.07596123492977800, 7.225344253366801100 ) ) ; +#2914 = CARTESIAN_POINT ( 'NONE', ( 0.4712823431584722800, -11.08850444455264700, 11.64398240562561800 ) ) ; +#2915 = CARTESIAN_POINT ( 'NONE', ( 24.15800171406233300, -100.0000000000000100, 6.546524093470333500 ) ) ; +#2916 = CARTESIAN_POINT ( 'NONE', ( 29.24809601916842200, -30.85770267085077000, 27.77382112443368800 ) ) ; +#2917 = CARTESIAN_POINT ( 'NONE', ( 31.64175189779727800, -100.0000000000000000, 20.06569364465487500 ) ) ; +#2918 = ADVANCED_FACE ( 'NONE', ( #12166 ), #12940, .F. ) ; +#2919 = CARTESIAN_POINT ( 'NONE', ( 39.67735505568865800, -11.29057977724533200, 9.738761650140848000 ) ) ; +#2920 = AXIS2_PLACEMENT_3D ( 'NONE', #7945, #1279, #9078 ) ; +#2921 = CARTESIAN_POINT ( 'NONE', ( 36.32975083499000100, -30.65572822697221500, 21.89555319846130000 ) ) ; +#2922 = CARTESIAN_POINT ( 'NONE', ( 2.515409671706414500, -29.59468410353903400, 21.62945744988957500 ) ) ; +#2923 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2705, #10532, #3815 ), + ( #11657, #4916, #12760 ), + ( #6052, #13861, #7177 ), + ( #561, #8334, #1653 ), + ( #9449, #2749, #10587 ), + ( #3864, #11704, #4968 ), + ( #12808, #6097, #13904 ), + ( #7228, #601, #8380 ), + ( #1700, #9502, #2796 ), + ( #10636, #3914, #11750 ), + ( #5016, #12862, #6145 ), + ( #13955, #7274, #650 ), + ( #8426, #1743, #9553 ), + ( #2841, #10680, #3960 ), + ( #11797, #5068, #12908 ), + ( #6202, #14004, #7327 ), + ( #699, #8479, #1796 ), + ( #9603, #2896, #10734 ), + ( #4008, #11845, #5120 ), + ( #12956, #6247, #14058 ), + ( #7381, #750, #8530 ), + ( #1851, #9657, #2951 ), + ( #10794, #4062, #11900 ), + ( #5175, #13015, #6303 ), + ( #14113, #7443, #802 ), + ( #8588, #1901, #9715 ), + ( #3005, #10850, #4117 ), + ( #11954, #5228, #13068 ), + ( #6359, #14167, #7497 ), + ( #858, #8637, #1952 ), + ( #9767, #3060, #10903 ), + ( #4169, #12007, #5275 ), + ( #13119, #6412, #14215 ), + ( #7546, #898, #8692 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.02766100349503719900, 0.02775985207155873300, 0.02780927635981950100, 0.02785870064808027000, 0.02805639780112334500, 0.02845179210720948800, 0.02924258071938178000, 0.03082415794372636600, 0.03240573516807095100, 0.03398731239241552900, 0.03715046684110469300, 0.04031362128979386300, 0.04347677573848302700, 0.04505835296282760500, 0.04663993018717219100, 0.04980308463586136100, 0.05296623908455052500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7881774157523300200, 1.000000000000000000), + ( 1.000000000000000000, 0.7881835579908633700, 1.000000000000000000), + ( 1.000000000000000000, 0.7881897016398581300, 1.000000000000000000), + ( 1.000000000000000000, 0.7881989192304935700, 1.000000000000000000), + ( 1.000000000000000000, 0.7882019921135543500, 1.000000000000000000), + ( 1.000000000000000000, 0.7882081385856634100, 1.000000000000000000), + ( 1.000000000000000000, 0.7882103754369483900, 1.000000000000000000), + ( 1.000000000000000000, 0.7882235142050119100, 1.000000000000000000), + ( 1.000000000000000000, 0.7882339849885506800, 1.000000000000000000), + ( 1.000000000000000000, 0.7882652803152304700, 1.000000000000000000), + ( 1.000000000000000000, 0.7882859879566255200, 1.000000000000000000), + ( 1.000000000000000000, 0.7883476680694789800, 1.000000000000000000), + ( 1.000000000000000000, 0.7883881996466704000, 1.000000000000000000), + ( 1.000000000000000000, 0.7885081585320751200, 1.000000000000000000), + ( 1.000000000000000000, 0.7885859810860635900, 1.000000000000000000), + ( 1.000000000000000000, 0.7887372779714814100, 1.000000000000000000), + ( 1.000000000000000000, 0.7888109382392778400, 1.000000000000000000), + ( 1.000000000000000000, 0.7889514466350253700, 1.000000000000000000), + ( 1.000000000000000000, 0.7890185856730073100, 1.000000000000000000), + ( 1.000000000000000000, 0.7892117590484698500, 1.000000000000000000), + ( 1.000000000000000000, 0.7893290209974214200, 1.000000000000000000), + ( 1.000000000000000000, 0.7895416058584591200, 1.000000000000000000), + ( 1.000000000000000000, 0.7896384181330781100, 1.000000000000000000), + ( 1.000000000000000000, 0.7898075810715709000, 1.000000000000000000), + ( 1.000000000000000000, 0.7898803057593851700, 1.000000000000000000), + ( 1.000000000000000000, 0.7899753333731311900, 1.000000000000000000), + ( 1.000000000000000000, 0.7900043248325565600, 1.000000000000000000), + ( 1.000000000000000000, 0.7900579949296961900, 1.000000000000000000), + ( 1.000000000000000000, 0.7900828238596452300, 1.000000000000000000), + ( 1.000000000000000000, 0.7901513627294337600, 1.000000000000000000), + ( 1.000000000000000000, 0.7901876276222815600, 1.000000000000000000), + ( 1.000000000000000000, 0.7902470652406085000, 1.000000000000000000), + ( 1.000000000000000000, 0.7902708493052795800, 1.000000000000000000), + ( 1.000000000000000000, 0.7902880406271845000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2924 = CARTESIAN_POINT ( 'NONE', ( 5.410446972845001300, -20.28809933266904900, -14.84468966708453100 ) ) ; +#2925 = CARTESIAN_POINT ( 'NONE', ( 34.73168134489870300, -22.85706165517972400, 10.12720883184863200 ) ) ; +#2926 = CARTESIAN_POINT ( 'NONE', ( 32.73630392668464900, -30.48580206455878600, 26.31929464370444500 ) ) ; +#2927 = CARTESIAN_POINT ( 'NONE', ( 17.39762135614234900, -19.90864822626257400, 23.25255904423470500 ) ) ; +#2928 = CARTESIAN_POINT ( 'NONE', ( 29.78778703224863000, -11.22097292470636100, -25.05003506702586700 ) ) ; +#2929 = CARTESIAN_POINT ( 'NONE', ( 13.08003739357228800, -20.87635319065607900, -23.59580431924174700 ) ) ; +#2930 = EDGE_CURVE ( 'NONE', #283, #10708, #4271, .T. ) ; +#2931 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9032, #2482, #11441, #4703, #12541, #5834, #13641, #6955, #347, #8103, #1435, #9232, #2530, #10347, #3638, #11487 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001001397045579701700, 0.001502095568369558200, 0.002002794091159415100, 0.002503492613949271600, 0.003004191136739128100, 0.003504889659528985000, 0.004005588182318841500 ), + .UNSPECIFIED. ) ; +#2932 = CARTESIAN_POINT ( 'NONE', ( 7.600528004080835800, -7.933499106966753100, 24.99999999999999600 ) ) ; +#2933 = CARTESIAN_POINT ( 'NONE', ( 9.041067957201352800, -11.68957431847583800, -25.00000000000000000 ) ) ; +#2934 = CARTESIAN_POINT ( 'NONE', ( 11.31186559264341100, -11.14063917059260900, 24.45614895767105800 ) ) ; +#2935 = CARTESIAN_POINT ( 'NONE', ( 23.77738673044906300, -19.43768828001757100, 23.29102891852414500 ) ) ; +#2936 = CARTESIAN_POINT ( 'NONE', ( 15.38693894785864200, -24.21134655477054000, 19.81140156505913200 ) ) ; +#2937 = EDGE_LOOP ( 'NONE', ( #4103, #4223, #4250, #4388 ) ) ; +#2938 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -96.63408478985344600, 6.393891568436776800 ) ) ; +#2939 = CARTESIAN_POINT ( 'NONE', ( 0.02838215973449089200, 9.894538436513098400, -16.11193963103031000 ) ) ; +#2940 = CARTESIAN_POINT ( 'NONE', ( 10.24051568586690100, -30.89786550559590200, 27.59022482724556000 ) ) ; +#2941 = CARTESIAN_POINT ( 'NONE', ( 35.41729173141509800, -30.42143641263381700, 24.40102673974989900 ) ) ; +#2942 = CARTESIAN_POINT ( 'NONE', ( 15.83632148099070300, -12.50000000000002300, 9.488424126386338000 ) ) ; +#2943 = AXIS2_PLACEMENT_3D ( 'NONE', #7980, #5710, #6836 ) ; +#2944 = CARTESIAN_POINT ( 'NONE', ( 17.50727469121788000, -27.99000927115244900, 27.51040716200952500 ) ) ; +#2945 = CARTESIAN_POINT ( 'NONE', ( 10.41255594480230000, -19.14441141815079200, 21.64327855722434900 ) ) ; +#2946 = CARTESIAN_POINT ( 'NONE', ( 2.397665792901791300, -19.58678552917502800, 7.946506517027475300 ) ) ; +#2947 = CARTESIAN_POINT ( 'NONE', ( 38.03695827960770300, -11.88475716204999900, 15.12698437120862300 ) ) ; +#2948 = CARTESIAN_POINT ( 'NONE', ( 6.497772312281708400, -29.62892762083291500, 25.64836697449344900 ) ) ; +#2949 = CARTESIAN_POINT ( 'NONE', ( 4.404671127074769800, -9.999999999999953800, 22.49587288321043500 ) ) ; +#2950 = FACE_OUTER_BOUND ( 'NONE', #10770, .T. ) ; +#2951 = CARTESIAN_POINT ( 'NONE', ( 39.31992648492995100, -10.00000000000000400, 17.95040799998698600 ) ) ; +#2952 = CARTESIAN_POINT ( 'NONE', ( 16.80042504707556000, -12.50000000000001200, 10.03866778226862700 ) ) ; +#2953 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6967, #5893, #10415, #3704, #11548, #4811, #12648, #5940, #13750, #7071, #452, #8218, #1549, #9343 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 4.524436851472196900E-017, 0.003104041898510147900, 0.006208083797020250700, 0.009312125695530353000, 0.01086414664478540700, 0.01164015711941293600, 0.01241616759404046700 ), + .UNSPECIFIED. ) ; +#2954 = CARTESIAN_POINT ( 'NONE', ( 37.81486673790828900, -11.92747418448650300, -19.08876031342177300 ) ) ; +#2955 = ORIENTED_EDGE ( 'NONE', *, *, #7932, .T. ) ; +#2956 = EDGE_CURVE ( 'NONE', #10708, #7788, #11972, .T. ) ; +#2957 = CARTESIAN_POINT ( 'NONE', ( 4.484220829794030500, -21.85705599866150500, -19.49566800300312200 ) ) ; +#2958 = CARTESIAN_POINT ( 'NONE', ( 4.695004096717283000, -10.00000000000000400, 22.84517401326613900 ) ) ; +#2959 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2960 = CARTESIAN_POINT ( 'NONE', ( 30.76210739782491600, -30.94744853315717500, 27.17383763995922400 ) ) ; +#2961 = CARTESIAN_POINT ( 'NONE', ( 5.187203338102899700, -21.71821144627726600, 16.41217989471888900 ) ) ; +#2962 = CARTESIAN_POINT ( 'NONE', ( 8.349804498344175500, -30.89956533381286600, 26.77194543162932700 ) ) ; +#2963 = CARTESIAN_POINT ( 'NONE', ( 36.63538832379747100, -30.48384809210560700, 22.34790659635682200 ) ) ; +#2964 = CARTESIAN_POINT ( 'NONE', ( 2.499999999997708500, -94.33857163534425200, 4.255063462585362700 ) ) ; +#2965 = CARTESIAN_POINT ( 'NONE', ( 4.848118580978634500, -31.02836943152902900, 23.75123458742200100 ) ) ; +#2966 = CARTESIAN_POINT ( 'NONE', ( 3.412113709088793600, -30.44840393649591800, 21.17219657683110500 ) ) ; +#2967 = CARTESIAN_POINT ( 'NONE', ( 26.41211803485424200, -89.23582230748408500, 10.53559886736074500 ) ) ; +#2968 = CARTESIAN_POINT ( 'NONE', ( 3.821401058883104700E-013, -9.617460812946481100, 16.85661084845104400 ) ) ; +#2969 = ORIENTED_EDGE ( 'NONE', *, *, #12658, .F. ) ; +#2970 = CARTESIAN_POINT ( 'NONE', ( 11.76044685354238700, -9.781278341185187100, -24.99999999999999600 ) ) ; +#2971 = CARTESIAN_POINT ( 'NONE', ( 29.14545225268740200, -30.75873686437014200, 27.82447300748301800 ) ) ; +#2972 = CARTESIAN_POINT ( 'NONE', ( 5.786206076094038600, -17.58882759137239300, -22.13086528615812300 ) ) ; +#2973 = CARTESIAN_POINT ( 'NONE', ( 39.53098848804428700, -11.87604604782285400, 8.038251106705535800 ) ) ; +#2974 = CARTESIAN_POINT ( 'NONE', ( 35.95718174683476300, -30.82659916786373000, 22.63205109523813600 ) ) ; +#2975 = CARTESIAN_POINT ( 'NONE', ( 3.550532450417982900, -28.87042599059482100, 21.75716416133742500 ) ) ; +#2976 = CARTESIAN_POINT ( 'NONE', ( 7.537574157781112800, -100.0000000000000300, -33.33891646864278600 ) ) ; +#2977 = ORIENTED_EDGE ( 'NONE', *, *, #8858, .F. ) ; +#2978 = CARTESIAN_POINT ( 'NONE', ( 35.09207653998530700, -12.50000000000080500, 8.358891750766623800 ) ) ; +#2979 = EDGE_CURVE ( 'NONE', #4778, #13599, #12006, .T. ) ; +#2980 = CARTESIAN_POINT ( 'NONE', ( 32.64329969372144500, -31.13955656706512800, 26.04946821155376600 ) ) ; +#2981 = CARTESIAN_POINT ( 'NONE', ( 30.46278212059218000, -12.28571944910756200, -24.99999999999524300 ) ) ; +#2982 = CARTESIAN_POINT ( 'NONE', ( 6.325192905292373000, -7.657894180033409300, 25.00000000000000000 ) ) ; +#2983 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.252496886568071200E-016, -7.103262821921560300E-016 ) ) ; +#2984 = CARTESIAN_POINT ( 'NONE', ( 12.97095949252599400, -12.49999999999949600, -22.09345754554037800 ) ) ; +#2985 = CARTESIAN_POINT ( 'NONE', ( 4.346729629750801600, -95.07596123493894400, 2.206608581396023400 ) ) ; +#2986 = ORIENTED_EDGE ( 'NONE', *, *, #13748, .T. ) ; +#2987 = CARTESIAN_POINT ( 'NONE', ( 13.03062581803845500, -13.15840229076052900, 24.34463445742768800 ) ) ; +#2988 = CARTESIAN_POINT ( 'NONE', ( 16.58155073222539500, -95.07596123493893000, 9.998812624560816400 ) ) ; +#2989 = CARTESIAN_POINT ( 'NONE', ( 22.26007419860971500, -19.18578942356169400, 23.40915807500986600 ) ) ; +#2990 = ORIENTED_EDGE ( 'NONE', *, *, #7997, .T. ) ; +#2991 = CARTESIAN_POINT ( 'NONE', ( 16.52022524181862900, -12.50000000000003700, 22.03117366968750800 ) ) ; +#2992 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -90.07596123493897300, -4.350951650170485700 ) ) ; +#2993 = CARTESIAN_POINT ( 'NONE', ( 17.43873147890898100, -19.88640213962530700, 23.25679227354088100 ) ) ; +#2994 = CARTESIAN_POINT ( 'NONE', ( 10.23993338266944200, -30.73930983655614200, 27.62342479962730100 ) ) ; +#2995 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3842, #1634, #11685, #4949, #12788, #6078, #13887, #7205, #585, #8360, #1683, #9479, #2780, #10618, #3895, #11732 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( -2.291010613938342400E-005, 0.004447751083406241800, 0.008918412272951864800, 0.01115374286772466800, 0.01227140816511107700, 0.01338907346249748800, 0.01562440405727030100, 0.01785973465204311600 ), + .UNSPECIFIED. ) ; +#2996 = CARTESIAN_POINT ( 'NONE', ( 34.88862432508802400, -29.26791717823883200, 24.37199292630016600 ) ) ; +#2997 = CARTESIAN_POINT ( 'NONE', ( 9.633987977855804600, -23.84803325566797800, 17.22140366789280100 ) ) ; +#2998 = CARTESIAN_POINT ( 'NONE', ( 17.51559366487758900, -25.57199624004485400, 22.25470527021052500 ) ) ; +#2999 = CARTESIAN_POINT ( 'NONE', ( -3.209927722384577900E-015, -22.49999999999999300, -14.54982113999828100 ) ) ; +#3000 = EDGE_CURVE ( 'NONE', #10454, #1250, #11962, .T. ) ; +#3001 = ADVANCED_FACE ( 'NONE', ( #11819 ), #2187, .T. ) ; +#3002 = ORIENTED_EDGE ( 'NONE', *, *, #4804, .F. ) ; +#3003 = CARTESIAN_POINT ( 'NONE', ( 2.499471059602230900, -20.40214451106247800, 7.960590300984209800 ) ) ; +#3004 = CARTESIAN_POINT ( 'NONE', ( 6.427759413962374600, -30.57795191157675800, 25.77363216972192800 ) ) ; +#3005 = CARTESIAN_POINT ( 'NONE', ( 33.69811640089928800, -11.87946583731637200, 21.03212002619213200 ) ) ; +#3006 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -17.49999999999999600 ) ) ; +#3007 = CARTESIAN_POINT ( 'NONE', ( 25.47130695174264800, -31.29892962639879200, 28.59564812038165000 ) ) ; +#3008 = CARTESIAN_POINT ( 'NONE', ( 39.69816112096353300, -11.20735551614584600, 9.995645184673035600 ) ) ; +#3009 = ORIENTED_EDGE ( 'NONE', *, *, #6676, .F. ) ; +#3010 = CARTESIAN_POINT ( 'NONE', ( 6.702948192170529400, -20.29775926015694800, -22.17129583657567300 ) ) ; +#3011 = CARTESIAN_POINT ( 'NONE', ( 9.075308248077121200, -10.00000000000000500, 23.60987045137423500 ) ) ; +#3012 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#3013 = CARTESIAN_POINT ( 'NONE', ( 30.66308169037286600, -30.47262166967895100, 27.30169044591058000 ) ) ; +#3014 = CARTESIAN_POINT ( 'NONE', ( 2.584868295208970800, -28.23680790294229200, 14.68792462719514300 ) ) ; +#3015 = CARTESIAN_POINT ( 'NONE', ( 8.349806062299816000, -30.35921107373351500, 26.86723153904145200 ) ) ; +#3016 = CARTESIAN_POINT ( 'NONE', ( 36.11862552175727400, -29.03041362124999100, 22.80352460202397700 ) ) ; +#3017 = EDGE_LOOP ( 'NONE', ( #6363, #13018, #11205, #14282, #13857, #6251, #4909, #5470, #12822 ) ) ; +#3018 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999989300, -90.97465602835055200, -3.162233253593989400 ) ) ; +#3019 = CARTESIAN_POINT ( 'NONE', ( 4.393030202806177600, -30.14047296785451000, 24.31013124398133800 ) ) ; +#3020 = CARTESIAN_POINT ( 'NONE', ( 4.246278686880925700, -34.13396898742740900, 12.66167394920755400 ) ) ; +#3021 = ORIENTED_EDGE ( 'NONE', *, *, #10865, .T. ) ; +#3022 = CARTESIAN_POINT ( 'NONE', ( 9.403825853421897900, -11.71257821251042100, -24.99999999999999300 ) ) ; +#3023 = FACE_OUTER_BOUND ( 'NONE', #3017, .T. ) ; +#3024 = CARTESIAN_POINT ( 'NONE', ( 29.14477841042316800, -30.82468763884649800, 27.81355398263558600 ) ) ; +#3025 = CARTESIAN_POINT ( 'NONE', ( 37.28441391548297900, -18.71040031715980200, -15.76406725965257700 ) ) ; +#3026 = CARTESIAN_POINT ( 'NONE', ( 22.54568490267499200, -28.77949532703398500, 29.18866828975543400 ) ) ; +#3027 = CARTESIAN_POINT ( 'NONE', ( 11.23942079380887500, -99.99999999999998600, 20.91762972292025000 ) ) ; +#3028 = CARTESIAN_POINT ( 'NONE', ( 35.20395784400008700, -31.02076076706549700, 23.68368682196004100 ) ) ; +#3029 = EDGE_CURVE ( 'NONE', #4385, #7788, #11780, .T. ) ; +#3030 = CARTESIAN_POINT ( 'NONE', ( 2.567486002477581000, -29.94471044870241600, 21.63617811194451300 ) ) ; +#3031 = CARTESIAN_POINT ( 'NONE', ( 11.92068888923827400, -20.28809933266904900, -22.98316459870592600 ) ) ; +#3032 = VERTEX_POINT ( 'NONE', #5212 ) ; +#3033 = CARTESIAN_POINT ( 'NONE', ( 32.52726776721422700, -30.30550323843204900, 26.42943061195412500 ) ) ; +#3034 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -97.57596123493894400, 11.50239124669685400 ) ) ; +#3035 = CARTESIAN_POINT ( 'NONE', ( 10.53661081727736900, -10.93847866935678700, 24.29410937100131200 ) ) ; +#3036 = CARTESIAN_POINT ( 'NONE', ( 0.2769107633572995300, -11.10764305342913300, 10.24333424758723200 ) ) ; +#3037 = CARTESIAN_POINT ( 'NONE', ( 16.35353332139774100, -12.50000000000000000, -14.26277169778993700 ) ) ; +#3038 = VECTOR ( 'NONE', #9975, 1000.000000000000000 ) ; +#3039 = VERTEX_POINT ( 'NONE', #4204 ) ; +#3040 = CARTESIAN_POINT ( 'NONE', ( 2.491357952927951500, -90.02697877893295700, -3.483023999303034300 ) ) ; +#3041 = CARTESIAN_POINT ( 'NONE', ( 20.78598449854145600, -33.38452916951351300, 26.50167657627947900 ) ) ; +#3042 = CARTESIAN_POINT ( 'NONE', ( 10.81554623362388600, -89.29659766701489300, 9.458710949950408100 ) ) ; +#3043 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10710, #11880, #14091 ), + ( #7421, #780, #8564 ), + ( #1882, #9692, #2982 ), + ( #10826, #4097, #11931 ), + ( #5207, #13046, #6334 ), + ( #14144, #7474, #835 ), + ( #8618, #1931, #9747 ), + ( #3035, #10880, #4144 ), + ( #11985, #5255, #13097 ), + ( #6389, #14196, #7524 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.02283920811399664200, 0.02482316812118210600, 0.02680712812836757300, 0.02879108813555304000, 0.03077504814273850800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7307095185408970500, 1.000000000000000000), + ( 1.000000000000000000, 0.7539691641360930500, 1.000000000000000000), + ( 1.000000000000000000, 0.7762801466636724000, 1.000000000000000000), + ( 1.000000000000000000, 0.8188606081556525400, 1.000000000000000000), + ( 1.000000000000000000, 0.8391325614706612900, 1.000000000000000000), + ( 1.000000000000000000, 0.8772246788127744400, 1.000000000000000000), + ( 1.000000000000000000, 0.8949609257026497300, 1.000000000000000000), + ( 1.000000000000000000, 0.9268637014048587400, 1.000000000000000000), + ( 1.000000000000000000, 0.9411131024122524300, 1.000000000000000000), + ( 1.000000000000000000, 0.9534250536596437000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3044 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3045 = CARTESIAN_POINT ( 'NONE', ( 23.47411650217508600, -19.00051484900047800, 23.41296639185410200 ) ) ; +#3046 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -7.502326567933269400, 20.44097942381857500 ) ) ; +#3047 = CARTESIAN_POINT ( 'NONE', ( 12.58864243847054900, -12.27098359494228300, -25.40043568053464200 ) ) ; +#3048 = CARTESIAN_POINT ( 'NONE', ( 10.44427402919155100, -30.90276217169150300, 27.66102668918262700 ) ) ; +#3049 = CARTESIAN_POINT ( 'NONE', ( 35.29760882413229000, -30.19399417873073000, 24.60466578013133800 ) ) ; +#3050 = EDGE_CURVE ( 'NONE', #6439, #7400, #11639, .T. ) ; +#3051 = DIRECTION ( 'NONE', ( -0.02203124760617600200, -0.9997572826085916500, 0.0000000000000000000 ) ) ; +#3052 = FACE_BOUND ( 'NONE', #12369, .T. ) ; +#3053 = CARTESIAN_POINT ( 'NONE', ( 37.79826851533766100, -18.80692593864921100, 7.933192589737016600 ) ) ; +#3054 = VERTEX_POINT ( 'NONE', #9798 ) ; +#3055 = CARTESIAN_POINT ( 'NONE', ( 2.500917061637003300, -21.21715426627433100, 7.959183209999368500 ) ) ; +#3056 = CARTESIAN_POINT ( 'NONE', ( 4.391696602365902500, -9.999999999999959100, 22.48813482049189400 ) ) ; +#3057 = CIRCLE ( 'NONE', #7782, 3.189999999999995100 ) ; +#3058 = CARTESIAN_POINT ( 'NONE', ( 6.561315093644947400, -29.71126709688807900, 25.73151773934167600 ) ) ; +#3059 = CARTESIAN_POINT ( 'NONE', ( 13.62324996247972000, -14.46566888762681200, -25.78741791179893300 ) ) ; +#3060 = CARTESIAN_POINT ( 'NONE', ( 30.92466044738431900, -10.00000000000546200, 23.60988794179067100 ) ) ; +#3061 = CARTESIAN_POINT ( 'NONE', ( 26.08226110557058400, -39.22755427998914300, 19.41490025252124600 ) ) ; +#3062 = CARTESIAN_POINT ( 'NONE', ( 3.659856576500799100, -28.91726478186119600, 22.17208234954402000 ) ) ; +#3063 = ORIENTED_EDGE ( 'NONE', *, *, #246, .T. ) ; +#3064 = AXIS2_PLACEMENT_3D ( 'NONE', #6577, #14375, #7716 ) ; +#3065 = CARTESIAN_POINT ( 'NONE', ( 9.931129374143845100, -18.48041725007659500, -25.28131935220297400 ) ) ; +#3066 = CARTESIAN_POINT ( 'NONE', ( 4.345638686747127700, -95.14102716985027500, 12.92966114424112500 ) ) ; +#3067 = CARTESIAN_POINT ( 'NONE', ( 30.66997736872438200, -30.80720918785307600, 27.25910000774574000 ) ) ; +#3068 = CARTESIAN_POINT ( 'NONE', ( 2.500000000014535000, -26.90723010784125100, 7.764646783533653000 ) ) ; +#3069 = CARTESIAN_POINT ( 'NONE', ( 8.465044880715115700, -31.05677115856170500, 26.75491145101037600 ) ) ; +#3070 = CARTESIAN_POINT ( 'NONE', ( 36.86616259019998400, -30.12294830354310400, 22.64753838050279100 ) ) ; +#3071 = CIRCLE ( 'NONE', #10455, 2.500000000000004000 ) ; +#3072 = VERTEX_POINT ( 'NONE', #12036 ) ; +#3073 = DIRECTION ( 'NONE', ( -0.4327510625117998400, 0.01347413249252711300, 0.9014127609749499300 ) ) ; +#3074 = EDGE_CURVE ( 'NONE', #2637, #2710, #11624, .T. ) ; +#3075 = CARTESIAN_POINT ( 'NONE', ( 4.849152325393816900, -29.20366236758764000, 24.07206906562095800 ) ) ; +#3076 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -22.46243069294107600, -27.19746277637471700 ) ) ; +#3077 = EDGE_LOOP ( 'NONE', ( #9313, #9354, #9476 ) ) ; +#3078 = CARTESIAN_POINT ( 'NONE', ( 35.40415330702830200, -20.21809544219601000, -19.40218311908805800 ) ) ; +#3079 = CARTESIAN_POINT ( 'NONE', ( 26.46817465077106800, -14.46893267639662500, 24.13004395842109400 ) ) ; +#3080 = ADVANCED_FACE ( 'NONE', ( #11605 ), #13871, .F. ) ; +#3081 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -31.29513776008465000, 28.74509265499353500 ) ) ; +#3082 = CARTESIAN_POINT ( 'NONE', ( 34.18823190338472500, -31.14331285195573800, 24.76929839598491200 ) ) ; +#3083 = CARTESIAN_POINT ( 'NONE', ( 3.475421684823352600, -28.91146545292129500, 21.81777319092264400 ) ) ; +#3084 = FACE_OUTER_BOUND ( 'NONE', #2328, .T. ) ; +#3085 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999990100, -100.0000000000000300, -38.36942826376123600 ) ) ; +#3086 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -97.51638471114853200, 22.06850012136331100 ) ) ; +#3087 = CARTESIAN_POINT ( 'NONE', ( 32.50534259255457700, -30.94082107352964400, 26.27938550299138900 ) ) ; +#3088 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1850, #5119, #9656 ), + ( #2949, #10792, #4061 ), + ( #11898, #5174, #13014 ), + ( #6302, #14110, #7441 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.009414676679439243000, 0.01024624484337534300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811862742400, 1.000000000000000000), + ( 1.000000000000000000, 0.7145999924688197800, 1.000000000000000000), + ( 1.000000000000000000, 0.7232339863000439900, 1.000000000000000000), + ( 1.000000000000000000, 0.7307095185408969400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3089 = CARTESIAN_POINT ( 'NONE', ( 3.719716726640827100, -29.12423687327264000, 22.79216399906917800 ) ) ; +#3090 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000001400, -22.50000000000002100, 26.62899292861731100 ) ) ; +#3091 = CARTESIAN_POINT ( 'NONE', ( 0.03278853172402838200, -10.13115412689606200, 11.07699822284834400 ) ) ; +#3092 = CARTESIAN_POINT ( 'NONE', ( 11.50394523830205500, -20.97746707007165800, -22.87523671426892200 ) ) ; +#3093 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -100.0000000000000100, -25.63802908547508300 ) ) ; +#3094 = ORIENTED_EDGE ( 'NONE', *, *, #5815, .F. ) ; +#3095 = EDGE_CURVE ( 'NONE', #12157, #5570, #11452, .T. ) ; +#3096 = CARTESIAN_POINT ( 'NONE', ( 22.35960462362697100, -27.96255689439433600, 27.45771657700778300 ) ) ; +#3097 = CARTESIAN_POINT ( 'NONE', ( 1.530585954603105800, -95.07596123493894400, 7.948371964452274300 ) ) ; +#3098 = CARTESIAN_POINT ( 'NONE', ( 12.72082174770078200, -97.50626985830649600, 21.67499666579136900 ) ) ; +#3099 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 20.69000000000000100 ) ) ; +#3100 = CARTESIAN_POINT ( 'NONE', ( 2.279288935073169300, -12.42663060972254900, -19.01768978589713700 ) ) ; +#3101 = CARTESIAN_POINT ( 'NONE', ( 10.44477844910416300, -30.78732647019760500, 27.68635702066287900 ) ) ; +#3102 = CARTESIAN_POINT ( 'NONE', ( 34.88956949526017600, -31.07050097182689500, 24.05508193590851100 ) ) ; +#3103 = CARTESIAN_POINT ( 'NONE', ( 2.595065312819699900, -28.78093517868171600, 14.83055176873345400 ) ) ; +#3104 = CARTESIAN_POINT ( 'NONE', ( 10.21356803147116900, -21.08963630737915900, -22.07700780114197800 ) ) ; +#3105 = ORIENTED_EDGE ( 'NONE', *, *, #11817, .T. ) ; +#3106 = CARTESIAN_POINT ( 'NONE', ( 2.201005408886895300, -18.79869268715736700, 8.146230723628994100 ) ) ; +#3107 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3108 = CARTESIAN_POINT ( 'NONE', ( 6.656556062334638000, -30.87410061640056100, 25.77405036488533000 ) ) ; +#3109 = CARTESIAN_POINT ( 'NONE', ( 9.753514149594670000, -19.83023879095716400, -24.91173302800181900 ) ) ; +#3110 = CARTESIAN_POINT ( 'NONE', ( 30.40206080560377400, -32.67673390148111400, 26.84857170127913800 ) ) ; +#3111 = CARTESIAN_POINT ( 'NONE', ( 4.004326029185344600, -29.00299997636942400, 22.88673171288392200 ) ) ; +#3112 = CARTESIAN_POINT ( 'NONE', ( 6.855687943002071600, -99.99999999999995700, 0.5869512781180620300 ) ) ; +#3113 = CARTESIAN_POINT ( 'NONE', ( 13.70268351590879000, -22.42404519709362300, -26.70313485105232900 ) ) ; +#3114 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.500000000000016900, 25.00105000000004200 ) ) ; +#3115 = CARTESIAN_POINT ( 'NONE', ( 30.36139112207252600, -30.47430938035068600, 27.42192930203132000 ) ) ; +#3116 = CARTESIAN_POINT ( 'NONE', ( 13.62324996247971300, -14.46566888762681600, -25.78741791179893600 ) ) ; +#3117 = CARTESIAN_POINT ( 'NONE', ( 8.436364930125263200, -30.56617239262814700, 26.90290243194895900 ) ) ; +#3118 = CARTESIAN_POINT ( 'NONE', ( 35.82464385679151100, -29.04255492885273100, 23.17207437028198700 ) ) ; +#3119 = EDGE_CURVE ( 'NONE', #13310, #5671, #4838, .T. ) ; +#3120 = CARTESIAN_POINT ( 'NONE', ( 24.16697709402295000, -12.50000000000004600, -13.90036464416684400 ) ) ; +#3121 = ORIENTED_EDGE ( 'NONE', *, *, #2979, .T. ) ; +#3122 = CARTESIAN_POINT ( 'NONE', ( 4.582444697276483400, -30.42139312379923800, 24.40074751115834300 ) ) ; +#3123 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57595174562565900, 13.49308746475995100 ) ) ; +#3124 = CARTESIAN_POINT ( 'NONE', ( 33.43604741810303000, -22.08243833383097200, -22.33604254621765500 ) ) ; +#3125 = CARTESIAN_POINT ( 'NONE', ( 36.45275017414396500, -28.87176579667352200, 21.75731964078546500 ) ) ; +#3126 = CARTESIAN_POINT ( 'NONE', ( 32.30976401068984700, -31.14018504833378400, 26.26123325161869500 ) ) ; +#3127 = CARTESIAN_POINT ( 'NONE', ( 3.030523973705473700, -30.33482344869033700, 21.63031543080120800 ) ) ; +#3128 = VECTOR ( 'NONE', #12935, 1000.000000000000000 ) ; +#3129 = CARTESIAN_POINT ( 'NONE', ( 12.48305147828858500, -11.71136266905848800, 24.56905168643819000 ) ) ; +#3130 = CARTESIAN_POINT ( 'NONE', ( 32.11054417205689800, -30.11330905708716100, 26.61289447329512800 ) ) ; +#3131 = EDGE_LOOP ( 'NONE', ( #7411, #9719, #8857, #10868 ) ) ; +#3132 = CARTESIAN_POINT ( 'NONE', ( 5.224560278913439300, -21.94851534494713600, -20.64285322084089800 ) ) ; +#3133 = CARTESIAN_POINT ( 'NONE', ( 20.83333333333332500, -39.55229479934740100, 19.78913308502480100 ) ) ; +#3134 = CARTESIAN_POINT ( 'NONE', ( 11.46772302646605900, -12.50000000000019500, -21.39123276705249700 ) ) ; +#3135 = DIRECTION ( 'NONE', ( 0.9571552693900997600, 0.2895751893356294200, 0.0000000000000000000 ) ) ; +#3136 = EDGE_CURVE ( 'NONE', #12814, #2027, #11431, .T. ) ; +#3137 = CIRCLE ( 'NONE', #3741, 3.189999999999995100 ) ; +#3138 = CARTESIAN_POINT ( 'NONE', ( 8.767005768446573200, -94.73433125966531100, 17.05622531304674500 ) ) ; +#3139 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.00000000000000000, 20.00000000000000000 ) ) ; +#3140 = CARTESIAN_POINT ( 'NONE', ( 34.06964974489392300, -10.08111104598822100, 23.01643867991733900 ) ) ; +#3141 = CARTESIAN_POINT ( 'NONE', ( 10.44427475617195400, -30.66044347006060600, 27.70376822972710700 ) ) ; +#3142 = CARTESIAN_POINT ( 'NONE', ( 34.91021120853592700, -29.96342147805331600, 24.86662333151958000 ) ) ; +#3143 = VERTEX_POINT ( 'NONE', #4134 ) ; +#3144 = AXIS2_PLACEMENT_3D ( 'NONE', #14330, #7667, #1023 ) ; +#3145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3146 = CARTESIAN_POINT ( 'NONE', ( 5.320738996434238600, -22.10628569622556900, -14.79899527394759700 ) ) ; +#3147 = ADVANCED_FACE ( 'NONE', ( #11476 ), #3088, .T. ) ; +#3148 = CARTESIAN_POINT ( 'NONE', ( 2.405457371397918800, -19.58182267942468300, 8.448192756689858000 ) ) ; +#3149 = CARTESIAN_POINT ( 'NONE', ( 10.24203709439397300, -94.73840293382748700, 17.60207004560131900 ) ) ; +#3150 = CARTESIAN_POINT ( 'NONE', ( 6.656552449227943300, -30.04184842297061000, 25.92081182236993400 ) ) ; +#3151 = CARTESIAN_POINT ( 'NONE', ( 16.20149486331613500, -19.79959861837965500, -26.72793363653366000 ) ) ; +#3152 = CARTESIAN_POINT ( 'NONE', ( 29.94521948615354000, -31.54315705787915600, 19.23894334179571800 ) ) ; +#3153 = CARTESIAN_POINT ( 'NONE', ( 4.782156415131435500, -29.18578534986109600, 23.99003526202638200 ) ) ; +#3154 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3155 = EDGE_CURVE ( 'NONE', #3667, #7285, #11286, .T. ) ; +#3156 = CARTESIAN_POINT ( 'NONE', ( 17.63891569969141000, -20.43405110651001200, -26.83915181038183900 ) ) ; +#3157 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -89.20772034660431900, 11.03354182248334700 ) ) ; +#3158 = VERTEX_POINT ( 'NONE', #4115 ) ; +#3159 = CARTESIAN_POINT ( 'NONE', ( 30.36972075514620100, -30.74175008475202400, 27.39684430225638300 ) ) ; +#3160 = CARTESIAN_POINT ( 'NONE', ( 25.75833234292393600, -20.28809933267076800, -23.88112285826538200 ) ) ; +#3161 = CARTESIAN_POINT ( 'NONE', ( 8.660774616636016900, -31.07172699683635700, 26.84686540795177500 ) ) ; +#3162 = CARTESIAN_POINT ( 'NONE', ( 36.54262192561820700, -29.87574992496347900, 23.18122315109996400 ) ) ; +#3163 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1668, #2763, #10601 ), + ( #3880, #11715, #4982 ), + ( #12824, #6110, #13917 ), + ( #7241, #615, #8392 ), + ( #1712, #9517, #2807 ), + ( #10649, #3928, #11763 ), + ( #5028, #12875, #6161 ), + ( #13969, #7287, #663 ), + ( #8440, #1755, #9564 ), + ( #2857, #10693, #3972 ), + ( #11808, #5082, #12921 ), + ( #6214, #14020, #7341 ), + ( #712, #8493, #1809 ), + ( #9619, #2912, #10754 ), + ( #4022, #11864, #5136 ), + ( #12973, #6261, #14074 ), + ( #7402, #763, #8546 ), + ( #1867, #9674, #2966 ), + ( #10810, #4079, #11915 ), + ( #5191, #13030, #6318 ), + ( #14129, #7458, #820 ), + ( #8605, #1916, #9732 ), + ( #3020, #934, #11586 ), + ( #4849, #12690, #5984 ), + ( #13789, #7110, #497 ), + ( #8259, #1584, #9382 ), + ( #2678, #10507, #3793 ), + ( #11634, #4894, #12737 ), + ( #6033, #13840, #7158 ), + ( #542, #8313, #1630 ), + ( #9426, #2731, #10561 ), + ( #3839, #11682, #4945 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.004636758949342862500, 0.006955138424014293800, 0.008114328161350010300, 0.009273517898685725000, 0.01159189737335715600, 0.01391027684802858800, 0.01622865632270002100, 0.01854703579737145000, 0.02086541527204288000, 0.02318379474671431300, 0.02550217422138574600, 0.02782055369605717500, 0.03013893317072860800, 0.03245731264540004100, 0.03709407159474290000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865472400, 1.000000000000000000), + ( 1.000000000000000000, 0.7075970115852122700, 1.000000000000000000), + ( 1.000000000000000000, 0.7089342781763949800, 1.000000000000000000), + ( 1.000000000000000000, 0.7125796301020198600, 1.000000000000000000), + ( 1.000000000000000000, 0.7140698102570509600, 1.000000000000000000), + ( 1.000000000000000000, 0.7168373401183767400, 1.000000000000000000), + ( 1.000000000000000000, 0.7178507260435007500, 1.000000000000000000), + ( 1.000000000000000000, 0.7200597284458178900, 1.000000000000000000), + ( 1.000000000000000000, 0.7212577850636184800, 1.000000000000000000), + ( 1.000000000000000000, 0.7251801945350094800, 1.000000000000000000), + ( 1.000000000000000000, 0.7282239506894149200, 1.000000000000000000), + ( 1.000000000000000000, 0.7355883659197098900, 1.000000000000000000), + ( 1.000000000000000000, 0.7399030273284422600, 1.000000000000000000), + ( 1.000000000000000000, 0.7505781663301448500, 1.000000000000000000), + ( 1.000000000000000000, 0.7569857375931385900, 1.000000000000000000), + ( 1.000000000000000000, 0.7725544161114865600, 1.000000000000000000), + ( 1.000000000000000000, 0.7817932707448133100, 1.000000000000000000), + ( 1.000000000000000000, 0.8032601027475118100, 1.000000000000000000), + ( 1.000000000000000000, 0.8154725684498915800, 1.000000000000000000), + ( 1.000000000000000000, 0.8413182052523937600, 1.000000000000000000), + ( 1.000000000000000000, 0.8549709358407754400, 1.000000000000000000), + ( 1.000000000000000000, 0.8813318193165414800, 1.000000000000000000), + ( 1.000000000000000000, 0.8940734682850636200, 1.000000000000000000), + ( 1.000000000000000000, 0.9178094688766210700, 1.000000000000000000), + ( 1.000000000000000000, 0.9288170236501658300, 1.000000000000000000), + ( 1.000000000000000000, 0.9486983996575031300, 1.000000000000000000), + ( 1.000000000000000000, 0.9575978644374902900, 1.000000000000000000), + ( 1.000000000000000000, 0.9728939500837332500, 1.000000000000000000), + ( 1.000000000000000000, 0.9793108764826391500, 1.000000000000000000), + ( 1.000000000000000000, 0.9947802711183100200, 1.000000000000000000), + ( 1.000000000000000000, 1.000014330393689300, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3164 = ORIENTED_EDGE ( 'NONE', *, *, #11861, .F. ) ; +#3165 = CARTESIAN_POINT ( 'NONE', ( 4.883001827013774100, -29.38657375347249000, 24.30412274026292600 ) ) ; +#3166 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -95.07596123493894400, 15.95758058754439400 ) ) ; +#3167 = CARTESIAN_POINT ( 'NONE', ( 29.17415838454479300, -18.46832343615360000, -25.76075168554904200 ) ) ; +#3168 = CARTESIAN_POINT ( 'NONE', ( 37.49999973802869100, -29.76891309500928500, 21.59912727361102100 ) ) ; +#3169 = CARTESIAN_POINT ( 'NONE', ( 19.21061107369833500, -33.38446413644916100, 26.50168804333582900 ) ) ; +#3170 = ORIENTED_EDGE ( 'NONE', *, *, #9435, .F. ) ; +#3171 = CARTESIAN_POINT ( 'NONE', ( 30.94031442671740400, -31.03692085194545300, 27.05808215780338300 ) ) ; +#3172 = CARTESIAN_POINT ( 'NONE', ( 3.030500020426674100, -29.13130469381116300, 21.84227612870523000 ) ) ; +#3173 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3174 = CARTESIAN_POINT ( 'NONE', ( 32.15095723294151500, -30.70578593636375700, 26.58471710323770400 ) ) ; +#3175 = ORIENTED_EDGE ( 'NONE', *, *, #7518, .F. ) ; +#3176 = CARTESIAN_POINT ( 'NONE', ( 16.49234680477385600, -22.46230936128455700, -27.19744138233006600 ) ) ; +#3177 = CARTESIAN_POINT ( 'NONE', ( 16.11481225595885300, -12.49999999999999300, -14.11791970673385600 ) ) ; +#3178 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998700, -99.99999999999998600, -25.63802908547508300 ) ) ; +#3179 = ORIENTED_EDGE ( 'NONE', *, *, #4129, .F. ) ; +#3180 = CARTESIAN_POINT ( 'NONE', ( 5.324950306637698600, -93.12693478934522800, 19.98089178745309600 ) ) ; +#3181 = CARTESIAN_POINT ( 'NONE', ( 3.811648262644350000E-018, 8.699345542647767700, -20.22358027453074700 ) ) ; +#3182 = CARTESIAN_POINT ( 'NONE', ( 10.75243318779745000, -30.82399997106448100, 27.78072682465969500 ) ) ; +#3183 = CARTESIAN_POINT ( 'NONE', ( 34.72976747613283500, -30.93956577136235700, 24.50402299584626700 ) ) ; +#3184 = ORIENTED_EDGE ( 'NONE', *, *, #8997, .T. ) ; +#3185 = CARTESIAN_POINT ( 'NONE', ( 19.22906418563061600, -31.32859326669797200, 28.73919354652433700 ) ) ; +#3186 = CARTESIAN_POINT ( 'NONE', ( 33.87162370026808100, -30.85481077721159000, 25.38877601140509900 ) ) ; +#3187 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3188 = CYLINDRICAL_SURFACE ( 'NONE', #2943, 1.200000000000006600 ) ; +#3189 = EDGE_CURVE ( 'NONE', #12157, #4437, #3341, .T. ) ; +#3190 = CARTESIAN_POINT ( 'NONE', ( 20.78653519411035300, -33.38451864986033300, 26.50167843114945400 ) ) ; +#3191 = CARTESIAN_POINT ( 'NONE', ( 2.538135368709705500, -20.35098486658229800, 9.064280993378101700 ) ) ; +#3192 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#3193 = CARTESIAN_POINT ( 'NONE', ( 6.818741900410031100, -31.12006302487389700, 25.68364294180118500 ) ) ; +#3194 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000034100, -22.46243069294101600, -27.19746277637470300 ) ) ; +#3195 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #478, #7091, #2660, #10489, #3777, #11617, #4879, #12718, #6017, #13822, #7141, #527, #8295, #1614 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.006961684157187408200, 0.008511246495512131400, 0.01006080883383685500, 0.01315993351048630800, 0.01470949584881104000, 0.01625905818713577200, 0.01935818286378524300 ), + .UNSPECIFIED. ) ; +#3196 = EDGE_LOOP ( 'NONE', ( #12616, #12630, #12661, #12785 ) ) ; +#3197 = CARTESIAN_POINT ( 'NONE', ( 33.14079275355391000, -36.91504296464101700, 15.77007779198740600 ) ) ; +#3198 = CARTESIAN_POINT ( 'NONE', ( 6.612525215261269900, -29.66028957376918400, 25.73652218757652900 ) ) ; +#3199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9991267550157736400, 0.04178190292040556700 ) ) ; +#3200 = CARTESIAN_POINT ( 'NONE', ( 22.35476337355881400, -30.65997555879721000, 28.85708888820669000 ) ) ; +#3201 = CARTESIAN_POINT ( 'NONE', ( 37.60225822619877100, -19.59044100409838100, 7.821086872347041900 ) ) ; +#3202 = ORIENTED_EDGE ( 'NONE', *, *, #11129, .T. ) ; +#3203 = CARTESIAN_POINT ( 'NONE', ( 30.36136744965399700, -30.98147823977082300, 27.33244108432571200 ) ) ; +#3204 = FACE_OUTER_BOUND ( 'NONE', #8612, .T. ) ; +#3205 = CARTESIAN_POINT ( 'NONE', ( 30.15371374435567700, -100.0000000000000300, -35.71244580412994900 ) ) ; +#3206 = CARTESIAN_POINT ( 'NONE', ( 8.632699254334784900, -30.69297538080754600, 26.97559591011030700 ) ) ; +#3207 = CARTESIAN_POINT ( 'NONE', ( 35.84920884159352300, -30.85805852343428400, 22.85779259477988700 ) ) ; +#3208 = CARTESIAN_POINT ( 'NONE', ( 4.906450756120781500, -30.80842160098734400, 24.30051670175721100 ) ) ; +#3209 = VECTOR ( 'NONE', #4277, 1000.000000000000000 ) ; +#3210 = CARTESIAN_POINT ( 'NONE', ( 26.22035198873892300, -20.42009037698360200, -26.36989492757654900 ) ) ; +#3211 = ADVANCED_FACE ( 'NONE', ( #11274 ), #12134, .T. ) ; +#3212 = CARTESIAN_POINT ( 'NONE', ( 32.38702417045474400, -32.09638995667384600, 24.17620793761280900 ) ) ; +#3213 = ORIENTED_EDGE ( 'NONE', *, *, #12570, .F. ) ; +#3214 = EDGE_CURVE ( 'NONE', #4385, #9194, #11138, .T. ) ; +#3215 = CARTESIAN_POINT ( 'NONE', ( 3.518821415582477300, -30.57468187722951200, 21.70547732310423300 ) ) ; +#3216 = LINE ( 'NONE', #5066, #9158 ) ; +#3217 = CARTESIAN_POINT ( 'NONE', ( 31.90844965256874800, -30.07004431359629100, 26.70354843165903700 ) ) ; +#3218 = EDGE_LOOP ( 'NONE', ( #1502, #6890, #10690, #13767, #13357 ) ) ; +#3219 = CARTESIAN_POINT ( 'NONE', ( 29.81717024616803300, -11.28189759761637100, -25.05147551186391300 ) ) ; +#3220 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3221 = CARTESIAN_POINT ( 'NONE', ( 9.280015848901378200, -21.19331877692603400, -21.33617078333526300 ) ) ; +#3222 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3223 = CIRCLE ( 'NONE', #12099, 2.499999999999999100 ) ; +#3224 = ORIENTED_EDGE ( 'NONE', *, *, #10865, .F. ) ; +#3225 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -19.99921743497181100, -11.50057696281169100 ) ) ; +#3226 = CARTESIAN_POINT ( 'NONE', ( 10.75175249692579600, -30.74119921268455300, 27.79428103565000200 ) ) ; +#3227 = CARTESIAN_POINT ( 'NONE', ( 34.56800387737324300, -29.58133305136215100, 24.89519097361458900 ) ) ; +#3228 = ORIENTED_EDGE ( 'NONE', *, *, #9671, .F. ) ; +#3229 = CARTESIAN_POINT ( 'NONE', ( 24.18656029486820500, -24.22071314716919900, 19.87800939054431400 ) ) ; +#3230 = EDGE_CURVE ( 'NONE', #2795, #13139, #3427, .T. ) ; +#3231 = CARTESIAN_POINT ( 'NONE', ( 33.68957716200642200, -29.64465531543905600, 25.53709504297985000 ) ) ; +#3232 = CARTESIAN_POINT ( 'NONE', ( 36.64147487587563700, -10.00000000000006900, 24.72287626683878900 ) ) ; +#3233 = CARTESIAN_POINT ( 'NONE', ( 2.692238879958670900, -21.02457596055148100, 10.30588825440519000 ) ) ; +#3234 = CARTESIAN_POINT ( 'NONE', ( 6.701597255594369300, -30.35900078484451500, 25.99572689453077600 ) ) ; +#3235 = CARTESIAN_POINT ( 'NONE', ( 16.33707368133799800, -19.18949841699703600, 23.36467695346054900 ) ) ; +#3236 = LINE ( 'NONE', #9114, #3395 ) ; +#3237 = EDGE_LOOP ( 'NONE', ( #8677, #11906, #11465, #11115 ) ) ; +#3238 = CARTESIAN_POINT ( 'NONE', ( 37.25151882078311200, -29.45032187791309000, 17.69785893835582500 ) ) ; +#3239 = CARTESIAN_POINT ( 'NONE', ( 8.826722344898042700, -30.26685109654150800, 27.07496203823974700 ) ) ; +#3240 = AXIS2_PLACEMENT_3D ( 'NONE', #9756, #3044, #10888 ) ; +#3241 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.939923968897026900, 10.34592921149356200 ) ) ; +#3242 = CARTESIAN_POINT ( 'NONE', ( 37.80186308654483400, -18.79471576868639100, 7.917832147088381200 ) ) ; +#3243 = ORIENTED_EDGE ( 'NONE', *, *, #5664, .T. ) ; +#3244 = CARTESIAN_POINT ( 'NONE', ( 30.16674295931802200, -30.70071958442300500, 27.48121480675034800 ) ) ; +#3245 = CARTESIAN_POINT ( 'NONE', ( 33.73394150420017500, -20.28809933267076800, -17.18097567570963200 ) ) ; +#3246 = CARTESIAN_POINT ( 'NONE', ( 8.659409794340314500, -30.23471068536537100, 26.99747119818554400 ) ) ; +#3247 = CARTESIAN_POINT ( 'NONE', ( 36.18743438682489000, -29.56628222677839100, 23.43960897279906800 ) ) ; +#3248 = FACE_OUTER_BOUND ( 'NONE', #4069, .T. ) ; +#3249 = EDGE_CURVE ( 'NONE', #7078, #13997, #11681, .T. ) ; +#3250 = CARTESIAN_POINT ( 'NONE', ( 4.795259194920901400, -29.82927977231927800, 24.58067104838509600 ) ) ; +#3251 = CARTESIAN_POINT ( 'NONE', ( 22.35824967657773100, -22.46239557907482300, -27.19677646555215800 ) ) ; +#3252 = CARTESIAN_POINT ( 'NONE', ( 10.23512731367603700, -10.86572783629313800, 24.22380741834321300 ) ) ; +#3253 = EDGE_LOOP ( 'NONE', ( #12849, #12994, #13350, #13462 ) ) ; +#3254 = CARTESIAN_POINT ( 'NONE', ( 2.605146517234469400, -29.52635981773050800, 21.88296913685091700 ) ) ; +#3255 = CARTESIAN_POINT ( 'NONE', ( 26.31128730375281700, -12.97040257430371200, 24.47623788258439200 ) ) ; +#3256 = CARTESIAN_POINT ( 'NONE', ( 31.95789990736139100, -30.58743666676734600, 26.71008367631076700 ) ) ; +#3257 = CARTESIAN_POINT ( 'NONE', ( 37.88247429062040800, -11.91741274050323100, -18.95475523009077500 ) ) ; +#3258 = CARTESIAN_POINT ( 'NONE', ( 28.94021999363524200, -30.78700480757120800, 27.88358034085561200 ) ) ; +#3259 = CARTESIAN_POINT ( 'NONE', ( 32.54267077964319600, -9.903570197966292500, 22.63956334605973500 ) ) ; +#3260 = CARTESIAN_POINT ( 'NONE', ( 6.643983027827742300, -23.36705306658292600, 13.77703946479898900 ) ) ; +#3261 = CARTESIAN_POINT ( 'NONE', ( 9.457775985711409200, -12.49999999999994300, -20.01944724095511000 ) ) ; +#3262 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999920500, -26.78671854973320200, 6.716753848522567500 ) ) ; +#3263 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7772, #2209, #11207, #4479, #12313, #5587, #13415, #6723, #125, #7862, #1213, #9002, #2300, #10126, #3412, #11254, #4526, #12357, #5638, #13460, #6769, #172, #7910, #1252, #9046, #2346, #10172, #3455, #11303, #4568, #12401, #5686, #13504, #6812 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003276775052284983600, 0.004915162578427476800, 0.006553550104569969900, 0.009830325156854953500, 0.01146871268299744600, 0.01310710020913993600, 0.01474548773528242900, 0.01556468149835367800, 0.01638387526142492600, 0.01966065031370995600, 0.02129903783985246200, 0.02293742536599497100, 0.02457581289213748100, 0.02539500665520872900, 0.02580460353674436000, 0.02621420041827999100 ), + .UNSPECIFIED. ) ; +#3264 = EDGE_CURVE ( 'NONE', #11692, #5570, #808, .T. ) ; +#3265 = CARTESIAN_POINT ( 'NONE', ( 37.16675665300236600, -29.66073502123910200, 18.51669749427869900 ) ) ; +#3266 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999996400, -21.23116646380272600, -11.74895849411035800 ) ) ; +#3267 = CARTESIAN_POINT ( 'NONE', ( 34.73091951064872500, -30.60569427220026700, 24.89450576831593400 ) ) ; +#3268 = CARTESIAN_POINT ( 'NONE', ( 25.29649415803011800, -12.50000000000130600, 21.74381281903582800 ) ) ; +#3269 = CARTESIAN_POINT ( 'NONE', ( 33.84366194561959400, -30.55393258824519300, 25.59006393527830900 ) ) ; +#3270 = CARTESIAN_POINT ( 'NONE', ( 35.15039562463992000, -10.01030339717064700, 22.66968200243135500 ) ) ; +#3271 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3272 = ADVANCED_FACE ( 'NONE', ( #11095 ), #5939, .F. ) ; +#3273 = CARTESIAN_POINT ( 'NONE', ( 2.872707821402460400, -18.90252319091486300, 12.39286270653107600 ) ) ; +#3274 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3275 = CARTESIAN_POINT ( 'NONE', ( 7.009366960608446100, -31.16642684550733500, 25.78104358935840400 ) ) ; +#3276 = CARTESIAN_POINT ( 'NONE', ( 1.458719849669569900, -10.31158604671421700, -18.46223377470234400 ) ) ; +#3277 = FACE_OUTER_BOUND ( 'NONE', #1150, .T. ) ; +#3278 = CARTESIAN_POINT ( 'NONE', ( 36.30769786672758700, -30.11710550026336400, 12.31106729370517500 ) ) ; +#3279 = FACE_OUTER_BOUND ( 'NONE', #2375, .T. ) ; +#3280 = CARTESIAN_POINT ( 'NONE', ( 10.85138326383408200, -30.74799658018466900, 27.83090453482417100 ) ) ; +#3281 = CARTESIAN_POINT ( 'NONE', ( 23.00962392661495000, -19.91501107607824700, 23.24858935828481400 ) ) ; +#3282 = ORIENTED_EDGE ( 'NONE', *, *, #4804, .T. ) ; +#3283 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -9.690683076519887300, 15.97730856377404900 ) ) ; +#3284 = CARTESIAN_POINT ( 'NONE', ( 37.49924619538306600, -21.21849837604667900, 7.943174790542588700 ) ) ; +#3285 = CARTESIAN_POINT ( 'NONE', ( 30.16323621562827400, -30.92643063847634700, 27.43040229481304900 ) ) ; +#3286 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -100.0000000000000300, -26.47069336410936200 ) ) ; +#3287 = CARTESIAN_POINT ( 'NONE', ( 8.735806961505817400, -30.82913376282605400, 26.98785254428820200 ) ) ; +#3288 = CARTESIAN_POINT ( 'NONE', ( 36.00591872187367700, -30.67353362360251600, 23.17976584458595100 ) ) ; +#3289 = DIRECTION ( 'NONE', ( -7.103262821921560300E-016, 3.469446951953615700E-016, -1.000000000000000000 ) ) ; +#3290 = EDGE_CURVE ( 'NONE', #1799, #2027, #10969, .T. ) ; +#3291 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12119, #4294, #13231, #6523, #14322, #7659, #1016, #8802, #2104, #9931 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2500000000000000000, 0.5000000000000000000, 0.7500000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#3292 = FACE_OUTER_BOUND ( 'NONE', #12969, .T. ) ; +#3293 = CARTESIAN_POINT ( 'NONE', ( 5.372275216059637900, -31.08733689513747600, 24.36764094134908000 ) ) ; +#3294 = ORIENTED_EDGE ( 'NONE', *, *, #5355, .T. ) ; +#3295 = CARTESIAN_POINT ( 'NONE', ( 12.03763380104507200, -10.93783535227889900, -25.16536567606900100 ) ) ; +#3296 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000900, 18.70000000000001700 ) ) ; +#3297 = CARTESIAN_POINT ( 'NONE', ( 3.621381521585936600, -30.62166641341219300, 21.75485388254736900 ) ) ; +#3298 = CARTESIAN_POINT ( 'NONE', ( 23.73032340103111400, -22.06078160892555900, -27.08529622448922000 ) ) ; +#3299 = CARTESIAN_POINT ( 'NONE', ( 31.90858384774986000, -31.11453129756611700, 26.51964870429619100 ) ) ; +#3300 = CARTESIAN_POINT ( 'NONE', ( 2.108602786200711500, -10.02759780138535300, 19.25175002005948600 ) ) ; +#3301 = CARTESIAN_POINT ( 'NONE', ( 28.93939748932835000, -30.81734566842719000, 27.87866819724044000 ) ) ; +#3302 = CARTESIAN_POINT ( 'NONE', ( 36.53339731214848000, -30.51784945095449700, 21.46706999200641900 ) ) ; +#3303 = CARTESIAN_POINT ( 'NONE', ( 23.53454995731761600, -10.00000000000000000, 25.78620402583550200 ) ) ; +#3304 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -24.23648177666926200, 19.98972415240891800 ) ) ; +#3305 = CARTESIAN_POINT ( 'NONE', ( 15.53140281136486900, -12.50000000000001100, -13.56154895033109200 ) ) ; +#3306 = CARTESIAN_POINT ( 'NONE', ( 2.083001212728684300, -11.91161885709855500, -18.88546603688192200 ) ) ; +#3307 = DIRECTION ( 'NONE', ( -1.000000000000000000, 4.336808689942017700E-017, 7.646963822076800200E-018 ) ) ; +#3308 = ORIENTED_EDGE ( 'NONE', *, *, #13937, .T. ) ; +#3309 = EDGE_CURVE ( 'NONE', #11105, #11912, #7897, .T. ) ; +#3310 = CARTESIAN_POINT ( 'NONE', ( 3.967122467627572900, -30.73480390034922400, 22.92283788621762900 ) ) ; +#3311 = CARTESIAN_POINT ( 'NONE', ( 37.49992423885517200, -27.15477723550157300, 7.065198858287479800 ) ) ; +#3312 = EDGE_LOOP ( 'NONE', ( #13010, #7697, #4928, #10471, #2388, #8410, #11297, #3243, #10855, #12766 ) ) ; +#3313 = CARTESIAN_POINT ( 'NONE', ( 0.06645549673282208400, -10.22768258732473100, -12.13947373075215300 ) ) ; +#3314 = CARTESIAN_POINT ( 'NONE', ( 34.15246260849999500, -29.45743022447156200, 25.10429546503339500 ) ) ; +#3315 = CARTESIAN_POINT ( 'NONE', ( 23.31435198321021900, -12.50000000000000500, 10.00150209761162800 ) ) ; +#3316 = CARTESIAN_POINT ( 'NONE', ( 33.50192163097870700, -29.62896498128082400, 25.64833652625543800 ) ) ; +#3317 = CARTESIAN_POINT ( 'NONE', ( 15.30795187748949700, -12.49999999999996300, -13.25554519143355500 ) ) ; +#3318 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#3319 = EDGE_LOOP ( 'NONE', ( #7512, #4595, #7901, #11252 ) ) ; +#3320 = CARTESIAN_POINT ( 'NONE', ( 3.528969214076016500, -19.52981452228855700, 13.78931707532619700 ) ) ; +#3321 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -94.96381121975215900, 18.14636354334061300 ) ) ; +#3322 = CARTESIAN_POINT ( 'NONE', ( 6.883777072026849600, -30.56010048140866800, 26.08353535592185700 ) ) ; +#3323 = CARTESIAN_POINT ( 'NONE', ( 0.3468991844576462300, -10.89710531027139200, -13.97037797781208800 ) ) ; +#3324 = CARTESIAN_POINT ( 'NONE', ( 37.41951946515962400, -28.97208599019569400, 8.247879059999217300 ) ) ; +#3325 = CARTESIAN_POINT ( 'NONE', ( 12.28127893508047000, -10.00559239634293500, 24.99901390963792700 ) ) ; +#3326 = CARTESIAN_POINT ( 'NONE', ( 26.54932301350857000, -100.0000000000000100, -37.69022306636186000 ) ) ; +#3327 = ORIENTED_EDGE ( 'NONE', *, *, #10176, .T. ) ; +#3328 = EDGE_CURVE ( 'NONE', #4588, #7556, #11258, .T. ) ; +#3329 = CARTESIAN_POINT ( 'NONE', ( 37.63399613019394300, -10.00577354972706200, 20.10430461088512600 ) ) ; +#3330 = CARTESIAN_POINT ( 'NONE', ( 37.50049453583423500, -20.40174582500459600, 7.970271438904386100 ) ) ; +#3331 = CARTESIAN_POINT ( 'NONE', ( 29.75950390534104500, -30.67089350030490600, 27.63260754752467800 ) ) ; +#3332 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 1.981438871123700300 ) ) ; +#3333 = CARTESIAN_POINT ( 'NONE', ( 8.742590269304091800, -30.39753561829353100, 27.04885892155871800 ) ) ; +#3334 = CARTESIAN_POINT ( 'NONE', ( 35.64529966313112700, -29.24600064420823000, 23.66424164221322400 ) ) ; +#3335 = ORIENTED_EDGE ( 'NONE', *, *, #13439, .F. ) ; +#3336 = CARTESIAN_POINT ( 'NONE', ( 17.59442521399260800, -19.87093624336306200, 23.25948761544210400 ) ) ; +#3337 = CARTESIAN_POINT ( 'NONE', ( 35.08006883961793700, -21.90477883531019300, 15.97616867277983500 ) ) ; +#3338 = CARTESIAN_POINT ( 'NONE', ( 5.039315858487890800, -30.20107616382413000, 24.87493276879045500 ) ) ; +#3339 = CARTESIAN_POINT ( 'NONE', ( 0.002739849957417682400, -10.00000000000000000, -20.16550224408270300 ) ) ; +#3340 = VERTEX_POINT ( 'NONE', #3373 ) ; +#3341 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7494, #10848, #8636, #1950 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001030692894525593300 ), + .UNSPECIFIED. ) ; +#3342 = CARTESIAN_POINT ( 'NONE', ( 26.36732873811757100, -95.07596123493897300, 16.58677689659897300 ) ) ; +#3343 = CARTESIAN_POINT ( 'NONE', ( 4.489810905923294000, -31.02752755283197700, 22.22550417873807400 ) ) ; +#3344 = CARTESIAN_POINT ( 'NONE', ( 2.572543971603645600, -29.88011532659490800, 21.87451422920317900 ) ) ; +#3345 = CARTESIAN_POINT ( 'NONE', ( 36.24309991432596000, -97.42196504633057000, 18.37393771276376600 ) ) ; +#3346 = EDGE_LOOP ( 'NONE', ( #7349, #7501, #9951, #10118 ) ) ; +#3347 = CARTESIAN_POINT ( 'NONE', ( 31.65836039091023200, -30.47704683368087300, 26.86453758694210600 ) ) ; +#3348 = CARTESIAN_POINT ( 'NONE', ( 28.94022199814917000, -30.84519804928426000, 27.87331807126701500 ) ) ; +#3349 = CARTESIAN_POINT ( 'NONE', ( 36.98060491202574700, -29.12341090409833900, 21.78116031138715100 ) ) ; +#3350 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3351 = CARTESIAN_POINT ( 'NONE', ( 6.601196932210758200, -21.64953177016363700, -18.07108245899954500 ) ) ; +#3352 = ORIENTED_EDGE ( 'NONE', *, *, #7558, .F. ) ; +#3353 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.547826958459685500, 19.13244310892889600 ) ) ; +#3354 = CARTESIAN_POINT ( 'NONE', ( 3.585955458816346000, -29.59075350757751000, 23.20376123666051500 ) ) ; +#3355 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2693, #9394, #1598, #10521, #3806, #11645 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.001039078685623651500, 0.002713667583492079600, 0.004388256481360507100 ), + .UNSPECIFIED. ) ; +#3356 = CARTESIAN_POINT ( 'NONE', ( 7.457329220356782300, -9.903570197966288900, 22.63956334605970300 ) ) ; +#3357 = ADVANCED_FACE ( 'NONE', ( #10947 ), #9615, .T. ) ; +#3358 = ORIENTED_EDGE ( 'NONE', *, *, #5797, .T. ) ; +#3359 = AXIS2_PLACEMENT_3D ( 'NONE', #11893, #5167, #13007 ) ; +#3360 = CARTESIAN_POINT ( 'NONE', ( 31.77494356481132700, -12.50000000000000200, -18.84320484673791500 ) ) ; +#3361 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.500000000000000000, 20.00000000000000000 ) ) ; +#3362 = CARTESIAN_POINT ( 'NONE', ( 34.40704777760887400, -30.39209252300416300, 25.24763620345287800 ) ) ; +#3363 = CARTESIAN_POINT ( 'NONE', ( 27.58749704109632000, -24.08563005028737800, 18.91600497774778900 ) ) ; +#3364 = CARTESIAN_POINT ( 'NONE', ( 33.66663665944008000, -30.37276248064704400, 25.75390630590052200 ) ) ; +#3365 = VECTOR ( 'NONE', #8856, 1000.000000000000000 ) ; +#3366 = APPROVAL_ROLE ( '' ) ; +#3367 = VERTEX_POINT ( 'NONE', #2834 ) ; +#3368 = CARTESIAN_POINT ( 'NONE', ( 5.004923169274651900, -20.00990046374172200, 16.43086106694577400 ) ) ; +#3369 = CARTESIAN_POINT ( 'NONE', ( 16.38562338548112900, -95.07596123493894400, 16.93028997940423300 ) ) ; +#3370 = CARTESIAN_POINT ( 'NONE', ( 35.30706169169864900, -34.80677151831253000, 13.32760694014992500 ) ) ; +#3371 = VECTOR ( 'NONE', #9866, 1000.000000000000000 ) ; +#3372 = CARTESIAN_POINT ( 'NONE', ( 7.003396353966086200, -29.79067423905652800, 26.03292893784390200 ) ) ; +#3373 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 12.00000000000000000, 22.50000000000000400 ) ) ; +#3374 = CARTESIAN_POINT ( 'NONE', ( 2.517987076129494900, -90.62694582891346300, -3.049517885020284900 ) ) ; +#3375 = EDGE_CURVE ( 'NONE', #2778, #13139, #1412, .T. ) ; +#3376 = CARTESIAN_POINT ( 'NONE', ( 14.69720589764407300, -33.07417061657546500, 28.29702473240662600 ) ) ; +#3377 = CARTESIAN_POINT ( 'NONE', ( 34.07776211278485300, -100.0000000000000100, -30.49003124919248700 ) ) ; +#3378 = CARTESIAN_POINT ( 'NONE', ( 37.60215618301224800, -19.58612657635476500, 7.999120759218523200 ) ) ; +#3379 = CARTESIAN_POINT ( 'NONE', ( 29.75968360133474300, -30.83141475162710100, 27.60628395364164700 ) ) ; +#3380 = CARTESIAN_POINT ( 'NONE', ( 8.944972863985368500, -30.98856051371079800, 27.02459771209930000 ) ) ; +#3381 = CARTESIAN_POINT ( 'NONE', ( 36.03629190166211800, -30.31976947161146900, 23.69844807249937100 ) ) ; +#3382 = VECTOR ( 'NONE', #194, 1000.000000000000100 ) ; +#3383 = VERTEX_POINT ( 'NONE', #10183 ) ; +#3384 = AXIS2_PLACEMENT_3D ( 'NONE', #9210, #2507, #10322 ) ; +#3385 = CARTESIAN_POINT ( 'NONE', ( 22.60237864385764100, -19.90864822626172500, 23.25255904423485000 ) ) ; +#3386 = CARTESIAN_POINT ( 'NONE', ( 37.49600406042303300, -26.84141164200336900, 7.162103117947402200 ) ) ; +#3387 = CARTESIAN_POINT ( 'NONE', ( 5.386737833678344200, -29.33557172305622300, 24.66092105330480100 ) ) ; +#3388 = CARTESIAN_POINT ( 'NONE', ( 2.499382874752950700, -19.99753149901139400, 7.847116941118293300 ) ) ; +#3389 = ORIENTED_EDGE ( 'NONE', *, *, #13597, .F. ) ; +#3390 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995100, -99.99999999999998600, 15.71726571334576600 ) ) ; +#3391 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 17.50000000000000400 ) ) ; +#3392 = EDGE_CURVE ( 'NONE', #2787, #10086, #10774, .T. ) ; +#3393 = CARTESIAN_POINT ( 'NONE', ( 17.10022743157190200, -19.62481538843428600, 23.30288536385345900 ) ) ; +#3394 = CARTESIAN_POINT ( 'NONE', ( 3.590150909307618900, -28.91649696391122900, 22.05483553743783900 ) ) ; +#3395 = VECTOR ( 'NONE', #1317, 1000.000000000000000 ) ; +#3396 = ORIENTED_EDGE ( 'NONE', *, *, #7977, .F. ) ; +#3397 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -30.66316004106086600, 28.85652737806401900 ) ) ; +#3398 = CARTESIAN_POINT ( 'NONE', ( 31.63934919519466900, -30.99432143732136800, 26.73318442519650200 ) ) ; +#3399 = CARTESIAN_POINT ( 'NONE', ( 31.27567026502381300, -11.43716540328553500, -25.00000000000000000 ) ) ; +#3400 = CARTESIAN_POINT ( 'NONE', ( 28.83675868081379400, -30.81858469636247500, 27.90930792737894700 ) ) ; +#3401 = CARTESIAN_POINT ( 'NONE', ( 36.98067969393732600, -30.32123312573372700, 21.56995963022138700 ) ) ; +#3402 = CARTESIAN_POINT ( 'NONE', ( 26.00066813879444500, -20.01385634412461600, 22.81368892164033100 ) ) ; +#3403 = CARTESIAN_POINT ( 'NONE', ( 6.660671656472410400, -12.50000000000026100, -16.72862597326279000 ) ) ; +#3404 = CARTESIAN_POINT ( 'NONE', ( 4.984578448924499300, -12.50000000000029300, 11.00580341458892900 ) ) ; +#3405 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -99.99999999999998600, -34.56037615019668900 ) ) ; +#3406 = ORIENTED_EDGE ( 'NONE', *, *, #2626, .F. ) ; +#3407 = AXIS2_PLACEMENT_3D ( 'NONE', #5018, #1656, #12864 ) ; +#3408 = CARTESIAN_POINT ( 'NONE', ( 4.291435490269155800, -30.90605857688624900, 23.02701091864319200 ) ) ; +#3409 = CYLINDRICAL_SURFACE ( 'NONE', #10081, 14.99999999999999800 ) ; +#3410 = CARTESIAN_POINT ( 'NONE', ( 1.948670977999587200, -10.00000000000000400, 16.24547452070607900 ) ) ; +#3411 = CARTESIAN_POINT ( 'NONE', ( 24.22426447457989300, -12.49999999999999300, -13.84041803154769900 ) ) ; +#3412 = CARTESIAN_POINT ( 'NONE', ( 5.505766447541251600, -35.79492981440785800, 14.38038997509935700 ) ) ; +#3413 = CARTESIAN_POINT ( 'NONE', ( 34.15186070104341800, -31.14500883756726800, 24.80598918242802100 ) ) ; +#3414 = CARTESIAN_POINT ( 'NONE', ( 29.13305456900094700, -12.50000000000006600, 20.16238936554611500 ) ) ; +#3415 = EDGE_CURVE ( 'NONE', #11552, #9588, #10745, .T. ) ; +#3416 = CARTESIAN_POINT ( 'NONE', ( 33.50969400963798300, -31.15038577116561000, 25.39127027692293100 ) ) ; +#3417 = EDGE_LOOP ( 'NONE', ( #7888, #7944, #8429, #8630, #8821, #1617, #9142, #9171 ) ) ; +#3418 = CARTESIAN_POINT ( 'NONE', ( 5.930338472913979900, -20.41744574669800000, 17.62588084555025200 ) ) ; +#3419 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3420 = CARTESIAN_POINT ( 'NONE', ( 26.81485634659796300, -39.11576966896411300, 19.23300845435738500 ) ) ; +#3421 = CARTESIAN_POINT ( 'NONE', ( 7.000305640704621800, -30.78002769762956700, 26.06662586916276300 ) ) ; +#3422 = CARTESIAN_POINT ( 'NONE', ( 31.66939331951960300, -100.0000000000000100, 2.561698833008323000 ) ) ; +#3423 = CARTESIAN_POINT ( 'NONE', ( 4.857832127170913900, -95.07596123493895800, 10.80590731068794800 ) ) ; +#3424 = CARTESIAN_POINT ( 'NONE', ( 10.57551530599988400, -32.72553602863885700, 25.41281461316427900 ) ) ; +#3425 = CARTESIAN_POINT ( 'NONE', ( 10.06946328151613600, -11.54808384581372500, -25.05790874229986500 ) ) ; +#3426 = AXIS2_PLACEMENT_3D ( 'NONE', #8882, #3289, #5511 ) ; +#3427 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8826, #7684, #9945, #3235 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001304440472179511700 ), + .UNSPECIFIED. ) ; +#3428 = CARTESIAN_POINT ( 'NONE', ( 37.79736080977920700, -18.80028438683785900, 8.211111772985610500 ) ) ; +#3429 = CARTESIAN_POINT ( 'NONE', ( 29.55553161138098500, -30.66329808737385000, 27.70362269639153800 ) ) ; +#3430 = CARTESIAN_POINT ( 'NONE', ( 2.501530477181977300, -27.27793638683423400, 8.009327807358515000 ) ) ; +#3431 = CARTESIAN_POINT ( 'NONE', ( 8.930731989970841100, -30.60492454141859800, 27.12477602026076800 ) ) ; +#3432 = CARTESIAN_POINT ( 'NONE', ( 35.45400545217953700, -29.13074680412940500, 23.69621800527880900 ) ) ; +#3433 = ORIENTED_EDGE ( 'NONE', *, *, #12678, .F. ) ; +#3434 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -7.520606794341281500, 25.00000000000000000 ) ) ; +#3435 = ADVANCED_FACE ( 'NONE', ( #10793 ), #10397, .F. ) ; +#3436 = EDGE_CURVE ( 'NONE', #2701, #5570, #10414, .T. ) ; +#3437 = CARTESIAN_POINT ( 'NONE', ( 37.63399613019395000, -10.00577354972706200, 20.10430461088510200 ) ) ; +#3438 = CARTESIAN_POINT ( 'NONE', ( 5.234630348416653900, -30.46467165113148900, 24.95509046666591500 ) ) ; +#3439 = CARTESIAN_POINT ( 'NONE', ( 15.26893158783548000, -12.49999999999998200, 8.727835630457237300 ) ) ; +#3440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3441 = CARTESIAN_POINT ( 'NONE', ( 2.943454828008273100, -30.27234758756594200, 21.96253780281957500 ) ) ; +#3442 = CARTESIAN_POINT ( 'NONE', ( 31.54307086730834400, -30.27840623963868400, 26.91048714605846800 ) ) ; +#3443 = CARTESIAN_POINT ( 'NONE', ( 28.83705365367793000, -30.83354509775507100, 27.90658408801584800 ) ) ; +#3444 = CARTESIAN_POINT ( 'NONE', ( 36.51152951678318500, -28.91849816797430300, 21.87960143492210800 ) ) ; +#3445 = ORIENTED_EDGE ( 'NONE', *, *, #3601, .T. ) ; +#3446 = CARTESIAN_POINT ( 'NONE', ( 26.43050178668002600, -20.03732252718027600, 22.70479737726689300 ) ) ; +#3447 = CARTESIAN_POINT ( 'NONE', ( 15.19376967305685400, -12.49999999999999800, -12.96732549675198400 ) ) ; +#3448 = CARTESIAN_POINT ( 'NONE', ( 15.11927760267687900, -12.50000000000002500, 8.350964916302656200 ) ) ; +#3449 = CARTESIAN_POINT ( 'NONE', ( 5.677782200314413600, -12.29899845655482200, -23.14529078713837900 ) ) ; +#3450 = CARTESIAN_POINT ( 'NONE', ( 3.642145583697750300, -29.97641398360682500, 23.42234498399044200 ) ) ; +#3451 = EDGE_CURVE ( 'NONE', #4109, #6192, #3767, .T. ) ; +#3452 = CIRCLE ( 'NONE', #3359, 3.189999999999995100 ) ; +#3453 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999988500, -19.99999999999981900, 8.005331014629296900 ) ) ; +#3454 = CARTESIAN_POINT ( 'NONE', ( 30.36601202213598700, -21.15196674433097400, -21.62957818561076100 ) ) ; +#3455 = CARTESIAN_POINT ( 'NONE', ( 2.534191978246809600, -28.17202531715363600, 7.613581957177634000 ) ) ; +#3456 = CARTESIAN_POINT ( 'NONE', ( 34.20608424426269100, -30.19007986340276500, 25.39466252905126700 ) ) ; +#3457 = VERTEX_POINT ( 'NONE', #8774 ) ; +#3458 = CARTESIAN_POINT ( 'NONE', ( 23.68278672427334500, -12.50000000000001200, 9.834857937626312100 ) ) ; +#3459 = CARTESIAN_POINT ( 'NONE', ( 33.54715921387077100, -30.13110460855689600, 25.81616867841452400 ) ) ; +#3460 = CARTESIAN_POINT ( 'NONE', ( 10.85441088113466700, -30.85147196041974700, 27.80805574678280600 ) ) ; +#3461 = CARTESIAN_POINT ( 'NONE', ( 7.495763172701926700, -19.08667804268515800, 19.65935853117818200 ) ) ; +#3462 = CARTESIAN_POINT ( 'NONE', ( 24.87893056190025800, -19.95261660767600300, 23.09786336384475200 ) ) ; +#3463 = CARTESIAN_POINT ( 'NONE', ( 34.87321023314538600, -12.50000000000231100, -12.75445912926172900 ) ) ; +#3464 = CARTESIAN_POINT ( 'NONE', ( 7.031485114663736300, -30.05910840793748300, 26.14440605941591400 ) ) ; +#3465 = CARTESIAN_POINT ( 'NONE', ( 34.52524707000379300, -94.72219806545261600, 15.44556310733242400 ) ) ; +#3466 = AXIS2_PLACEMENT_3D ( 'NONE', #8975, #2274, #10102 ) ; +#3467 = CARTESIAN_POINT ( 'NONE', ( 39.98636858654007400, -10.05452565383971300, 10.81146722466652400 ) ) ; +#3468 = LINE ( 'NONE', #5098, #3128 ) ; +#3469 = CARTESIAN_POINT ( 'NONE', ( 3.786974373494359300, -29.02398644052882700, 24.44846793296749600 ) ) ; +#3470 = CARTESIAN_POINT ( 'NONE', ( 37.47012122947076300, -21.14863442872619400, 8.795938025649142800 ) ) ; +#3471 = ORIENTED_EDGE ( 'NONE', *, *, #2690, .T. ) ; +#3472 = CARTESIAN_POINT ( 'NONE', ( 13.48694247221621200, -12.33033257160195200, 24.58909949360284800 ) ) ; +#3473 = CARTESIAN_POINT ( 'NONE', ( 9.048156544677485900, -31.03717695261828200, 27.05067816804183100 ) ) ; +#3474 = CARTESIAN_POINT ( 'NONE', ( 35.98614399318078200, -30.06183213830675200, 23.88201467884375300 ) ) ; +#3475 = CARTESIAN_POINT ( 'NONE', ( 30.33404848976166000, -28.22083403844212100, 25.86453585041720500 ) ) ; +#3476 = EDGE_CURVE ( 'NONE', #11552, #4014, #10569, .T. ) ; +#3477 = CARTESIAN_POINT ( 'NONE', ( 23.71124650850035600, -18.75228843941605900, 23.45673540518822300 ) ) ; +#3478 = CARTESIAN_POINT ( 'NONE', ( 5.502748922307934400, -29.44014549228967700, 24.83969779749700600 ) ) ; +#3479 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -22.46243069294101600, -27.19746277637470700 ) ) ; +#3480 = CARTESIAN_POINT ( 'NONE', ( 7.043435649406095700, -23.44944931201606100, 14.37305200612044100 ) ) ; +#3481 = CARTESIAN_POINT ( 'NONE', ( 0.4690069933910393500, -11.87602797356408300, 8.038298259193888700 ) ) ; +#3482 = CARTESIAN_POINT ( 'NONE', ( 35.53861766458626200, -31.01536219384101800, 22.20483729807138900 ) ) ; +#3483 = VERTEX_POINT ( 'NONE', #983 ) ; +#3484 = CARTESIAN_POINT ( 'NONE', ( 3.245785414095395400, -29.11656526017654300, 22.17118347209110100 ) ) ; +#3485 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999992000, -97.04517183358962000, 16.23828164244122600 ) ) ; +#3486 = CARTESIAN_POINT ( 'NONE', ( 31.56036835254175800, -30.79053498866236200, 26.85740529757401200 ) ) ; +#3487 = CARTESIAN_POINT ( 'NONE', ( 30.59617414657808600, -11.71257821251155600, -24.99999999999999600 ) ) ; +#3488 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457651600, -30.82655086342983700, 27.93782961424066300 ) ) ; +#3489 = CARTESIAN_POINT ( 'NONE', ( 37.42354942888033500, -29.95678509946675300, 21.69770403545059500 ) ) ; +#3490 = ORIENTED_EDGE ( 'NONE', *, *, #6822, .T. ) ; +#3491 = CARTESIAN_POINT ( 'NONE', ( 28.59903346440009000, -27.25264090244045800, 20.68906578370418700 ) ) ; +#3492 = CARTESIAN_POINT ( 'NONE', ( 5.982145082250659700, -23.17353277598574500, 12.39658562871806400 ) ) ; +#3493 = CARTESIAN_POINT ( 'NONE', ( 3.550532966968379200, -30.55079519729964900, 21.46087037243996700 ) ) ; +#3494 = EDGE_CURVE ( 'NONE', #13700, #14394, #10758, .T. ) ; +#3495 = CARTESIAN_POINT ( 'NONE', ( 4.292789341239340800, -29.07130895353422800, 23.35031952911023700 ) ) ; +#3496 = EDGE_LOOP ( 'NONE', ( #8065, #8241, #7753, #2018 ) ) ; +#3497 = CARTESIAN_POINT ( 'NONE', ( 13.55949315053757500, -19.58006586880408800, 22.81303985890503600 ) ) ; +#3498 = CARTESIAN_POINT ( 'NONE', ( 29.04391809252755500, -12.50000000000078300, -21.09594070274709300 ) ) ; +#3499 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5717, #10205, #12430, #6845, #234, #7986 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001064270059160667700, 0.002128540118321335300 ), + .UNSPECIFIED. ) ; +#3500 = CARTESIAN_POINT ( 'NONE', ( 34.05062949889752100, -31.04082696685616900, 25.04773122562699000 ) ) ; +#3501 = ORIENTED_EDGE ( 'NONE', *, *, #2930, .F. ) ; +#3502 = CARTESIAN_POINT ( 'NONE', ( 29.21979062291477200, -23.96312929382737900, 18.04216627041226000 ) ) ; +#3503 = CARTESIAN_POINT ( 'NONE', ( 33.50551919935595900, -30.92503837814067700, 25.61542959547447000 ) ) ; +#3504 = CARTESIAN_POINT ( 'NONE', ( 10.85507805471505100, -30.78579467140392400, 27.82034424878966300 ) ) ; +#3505 = CARTESIAN_POINT ( 'NONE', ( 9.591174661324476600, -19.45918593524073600, 21.07441168219335000 ) ) ; +#3506 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.23105625617651900, 0.0000000000000000000 ) ) ; +#3507 = CARTESIAN_POINT ( 'NONE', ( 24.95149606086802400, -12.50000000000003600, -12.47779557042794400 ) ) ; +#3508 = CARTESIAN_POINT ( 'NONE', ( 7.334437684435429500, -31.05610723094049800, 26.10084141316474800 ) ) ; +#3509 = CARTESIAN_POINT ( 'NONE', ( 37.50003777325704100, -20.41464224620984100, -11.52440134682129100 ) ) ; +#3510 = ORIENTED_EDGE ( 'NONE', *, *, #7209, .T. ) ; +#3511 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -10.00000000000000000, 25.00000000000000000 ) ) ; +#3512 = CARTESIAN_POINT ( 'NONE', ( 1.192620557725532700, -11.88716471593523700, 12.98660493449090000 ) ) ; +#3513 = EDGE_CURVE ( 'NONE', #12800, #13456, #10370, .T. ) ; +#3514 = CARTESIAN_POINT ( 'NONE', ( 37.39497061305303300, -20.31579995152080500, 9.821548018337370700 ) ) ; +#3515 = ORIENTED_EDGE ( 'NONE', *, *, #2736, .F. ) ; +#3516 = LINE ( 'NONE', #7936, #3382 ) ; +#3517 = CARTESIAN_POINT ( 'NONE', ( 16.52588349782476800, -19.00051484900024700, 23.41296639185414500 ) ) ; +#3518 = CARTESIAN_POINT ( 'NONE', ( 9.028951087887477900, -30.70333839831828700, 27.15348115494187200 ) ) ; +#3519 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10150, #5567, #4548, #12379 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.938131759077326900E-014, 0.0005885562342194029400 ), + .UNSPECIFIED. ) ; +#3520 = CARTESIAN_POINT ( 'NONE', ( 35.45520663033134000, -30.96840021943342000, 23.37290288894707000 ) ) ; +#3521 = CARTESIAN_POINT ( 'NONE', ( 34.57973720727261500, -31.14384953383052900, 25.22406956378723900 ) ) ; +#3522 = ORIENTED_EDGE ( 'NONE', *, *, #7704, .F. ) ; +#3523 = CARTESIAN_POINT ( 'NONE', ( 25.35559443792729400, -16.93352434452561500, 23.72877982842646800 ) ) ; +#3524 = CARTESIAN_POINT ( 'NONE', ( 5.690916459680492400, -30.82748372804540400, 25.05497067471464900 ) ) ; +#3525 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.23116646380275400, -11.74895849411027100 ) ) ; +#3526 = VECTOR ( 'NONE', #12305, 1000.000000000000000 ) ; +#3527 = CARTESIAN_POINT ( 'NONE', ( 6.334822948166680200, -12.50000000000002700, 15.27466821383483300 ) ) ; +#3528 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, -11.53187062879839400 ) ) ; +#3529 = CARTESIAN_POINT ( 'NONE', ( 31.65576177497775800, -30.34220567214155300, 26.95722281948489800 ) ) ; +#3530 = ORIENTED_EDGE ( 'NONE', *, *, #524, .F. ) ; +#3531 = CARTESIAN_POINT ( 'NONE', ( 3.531324659935569900, -30.60247172068026300, 22.02510077172160800 ) ) ; +#3532 = VECTOR ( 'NONE', #8028, 1000.000000000000000 ) ; +#3533 = CARTESIAN_POINT ( 'NONE', ( 17.59623452841535100, -27.98811716013370100, 27.51073874040980600 ) ) ; +#3534 = CARTESIAN_POINT ( 'NONE', ( 31.33908071324025000, -30.22433343847940200, 26.99674488498569900 ) ) ; +#3535 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#3536 = CARTESIAN_POINT ( 'NONE', ( 36.39592072787688400, -28.89824147606386300, 22.00232084653443500 ) ) ; +#3537 = CARTESIAN_POINT ( 'NONE', ( 15.84818654855863700, -22.03500000000001400, 20.29392408241356800 ) ) ; +#3538 = CARTESIAN_POINT ( 'NONE', ( 34.51480177768801400, -28.83242874896920700, 24.67646145018847600 ) ) ; +#3539 = CARTESIAN_POINT ( 'NONE', ( 4.679048678383598900, -30.99851586800502500, 23.54034632462080300 ) ) ; +#3540 = CARTESIAN_POINT ( 'NONE', ( 3.963536920535925200, -30.31979565592255800, 23.69845295799049000 ) ) ; +#3541 = VECTOR ( 'NONE', #13330, 1000.000000000000000 ) ; +#3542 = CARTESIAN_POINT ( 'NONE', ( 17.16764978832732100, -12.50000000000003600, -14.53259111763127400 ) ) ; +#3543 = CARTESIAN_POINT ( 'NONE', ( 39.87559197015355000, -10.00000000000000400, 10.44767342015809300 ) ) ; +#3544 = ORIENTED_EDGE ( 'NONE', *, *, #11651, .T. ) ; +#3545 = FACE_OUTER_BOUND ( 'NONE', #14066, .T. ) ; +#3546 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11604, #514, #1602, #9397, #2697, #10526, #3810, #11650, #4910, #12753 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979365000, 0.002130928723958730000, 0.003196393085938094800, 0.004261857447917460000 ), + .UNSPECIFIED. ) ; +#3547 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#3548 = CARTESIAN_POINT ( 'NONE', ( 22.35475939093771900, -30.65997548273778900, 28.85708890161801300 ) ) ; +#3549 = AXIS2_PLACEMENT_3D ( 'NONE', #4499, #12335, #5612 ) ; +#3550 = CARTESIAN_POINT ( 'NONE', ( 23.86296303971976200, -12.49999999999999300, -14.13302281679859900 ) ) ; +#3551 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#3552 = CARTESIAN_POINT ( 'NONE', ( 33.85264232753498000, -29.86007798531491300, 25.53843583092786000 ) ) ; +#3553 = ORIENTED_EDGE ( 'NONE', *, *, #7624, .F. ) ; +#3554 = CARTESIAN_POINT ( 'NONE', ( 30.42644205803288000, -12.49999999999996400, 19.23971586978451500 ) ) ; +#3555 = CARTESIAN_POINT ( 'NONE', ( 33.28876618661605800, -29.82835676482777700, 25.87691954540239400 ) ) ; +#3556 = CARTESIAN_POINT ( 'NONE', ( 11.05966620879890500, -30.84514131125426700, 27.87329261847289500 ) ) ; +#3557 = CARTESIAN_POINT ( 'NONE', ( 10.94499369036693900, -19.76205764669256500, 21.75677843901148400 ) ) ; +#3558 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, -19.99999999999999600 ) ) ; +#3559 = CARTESIAN_POINT ( 'NONE', ( 34.69008462737914300, -22.11641233134008300, -14.72407196107706200 ) ) ; +#3560 = LINE ( 'NONE', #12127, #3365 ) ; +#3561 = CARTESIAN_POINT ( 'NONE', ( 15.00381982278228000, -12.50000000000002000, 7.731481138760486300 ) ) ; +#3562 = ORIENTED_EDGE ( 'NONE', *, *, #7252, .T. ) ; +#3563 = EDGE_CURVE ( 'NONE', #12609, #8784, #10214, .T. ) ; +#3564 = CARTESIAN_POINT ( 'NONE', ( 24.98431926308933600, -12.49999999999995700, 7.897607680510575700 ) ) ; +#3565 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3566 = CARTESIAN_POINT ( 'NONE', ( 37.23587085664913600, -19.55369498357266900, 11.35002089261445400 ) ) ; +#3567 = ORIENTED_EDGE ( 'NONE', *, *, #11651, .F. ) ; +#3568 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000200, -11.53187062879839400 ) ) ; +#3569 = CARTESIAN_POINT ( 'NONE', ( 9.048103567134791800, -30.32577761712798300, 27.17624158404563100 ) ) ; +#3570 = CARTESIAN_POINT ( 'NONE', ( 35.73552464292853200, -29.79460514929455400, 24.08393284016315100 ) ) ; +#3571 = CYLINDRICAL_SURFACE ( 'NONE', #8145, 5.000000000000000900 ) ; +#3572 = ADVANCED_FACE ( 'NONE', ( #10552 ), #12674, .T. ) ; +#3573 = ORIENTED_EDGE ( 'NONE', *, *, #5080, .T. ) ; +#3574 = CARTESIAN_POINT ( 'NONE', ( 26.64686696877963700, -13.07468660127817900, 24.45784979497193800 ) ) ; +#3575 = CARTESIAN_POINT ( 'NONE', ( 5.690891714901496800, -29.83970658729204900, 25.22914032680372300 ) ) ; +#3576 = CARTESIAN_POINT ( 'NONE', ( 0.4733038167337518300, -11.89388180569394000, 7.855302532388346700 ) ) ; +#3577 = CARTESIAN_POINT ( 'NONE', ( 15.60628525315258100, -12.50000000000000200, 9.249158450804731800 ) ) ; +#3578 = CARTESIAN_POINT ( 'NONE', ( 3.615319495612296500, -10.00000000000000000, 21.82391791525995800 ) ) ; +#3579 = CARTESIAN_POINT ( 'NONE', ( 25.98932085058054000, -33.01221635565024600, 28.17851416907523900 ) ) ; +#3580 = ORIENTED_EDGE ( 'NONE', *, *, #7955, .F. ) ; +#3581 = EDGE_CURVE ( 'NONE', #13049, #3072, #10077, .T. ) ; +#3582 = CARTESIAN_POINT ( 'NONE', ( 2.791054007699210500, -29.52889981223512800, 22.20141923719441800 ) ) ; +#3583 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -18.70000000000000600 ) ) ; +#3584 = CARTESIAN_POINT ( 'NONE', ( 31.36713443802366500, -30.67562408815082300, 26.97915949164338700 ) ) ; +#3585 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -3.189999999999994200 ) ) ; +#3586 = CARTESIAN_POINT ( 'NONE', ( 37.44738937161820000, -29.63345143494911900, 21.86484347386026900 ) ) ; +#3587 = LINE ( 'NONE', #2371, #4116 ) ; +#3588 = CARTESIAN_POINT ( 'NONE', ( 11.19896521564827000, -100.0000000000000100, 4.926333178542761500 ) ) ; +#3589 = CARTESIAN_POINT ( 'NONE', ( 33.48215914749407300, -21.06167917917069600, 18.20200278043833500 ) ) ; +#3590 = CARTESIAN_POINT ( 'NONE', ( 6.581167606929339400, -31.16968660781154600, 25.44537161683978300 ) ) ; +#3591 = CARTESIAN_POINT ( 'NONE', ( 4.354464419531959500, -29.24597698380439300, 23.66356093213337200 ) ) ; +#3592 = CARTESIAN_POINT ( 'NONE', ( 34.33214552193123800, -17.46144121664785200, -22.04139510164364800 ) ) ; +#3593 = CARTESIAN_POINT ( 'NONE', ( 34.12352999470716200, -19.72398346481461200, 17.73822049801359300 ) ) ; +#3594 = ORIENTED_EDGE ( 'NONE', *, *, #13149, .T. ) ; +#3595 = CARTESIAN_POINT ( 'NONE', ( 27.48178782941619100, -11.76937172426245000, 24.56421820339169000 ) ) ; +#3596 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -9.816809639385194700, 10.78484860178723400 ) ) ; +#3597 = CARTESIAN_POINT ( 'NONE', ( 13.15273288870217200, -28.08123352512510400, 26.96594673378285700 ) ) ; +#3598 = CARTESIAN_POINT ( 'NONE', ( 28.15596638662237800, -20.95119180722070200, -23.06150730750518500 ) ) ; +#3599 = CARTESIAN_POINT ( 'NONE', ( 36.18064765472088600, -12.11568551640409600, -21.47327155446922500 ) ) ; +#3600 = CARTESIAN_POINT ( 'NONE', ( 24.03694115977859300, -12.50000000000002300, 9.598900931490675200 ) ) ; +#3601 = EDGE_CURVE ( 'NONE', #13599, #5085, #716, .T. ) ; +#3602 = CARTESIAN_POINT ( 'NONE', ( 33.38701814715752600, -30.62338693508344500, 25.88412040673102900 ) ) ; +#3603 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #431, #4794, #10443 ), + ( #3732, #11573, #4835 ), + ( #12677, #5969, #13775 ), + ( #7095, #481, #8246 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -3.469446951953614200E-018, 0.0001872366595206043000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941268098083124100, 1.000000000000000000), + ( 1.000000000000000000, 0.7941518730292356200, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643991125669800, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989882855000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3604 = CARTESIAN_POINT ( 'NONE', ( 11.06048168334745300, -30.81496026121288200, 27.87905002697403800 ) ) ; +#3605 = CARTESIAN_POINT ( 'NONE', ( 12.33340586685111600, -20.02567939897127800, 22.30901465793586200 ) ) ; +#3606 = CARTESIAN_POINT ( 'NONE', ( 6.293492125932203900, -12.50000000000042500, -16.06511324796045800 ) ) ; +#3607 = CARTESIAN_POINT ( 'NONE', ( 39.54564172042528700, -10.00000000000000200, -21.08086465129410300 ) ) ; +#3608 = CARTESIAN_POINT ( 'NONE', ( 34.02320080898690700, -12.49999999999976200, -15.39964641004080500 ) ) ; +#3609 = CARTESIAN_POINT ( 'NONE', ( 5.247091262523909400, -22.84265331883594300, 10.02304389157985500 ) ) ; +#3610 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -12.50000000000001200, 10.14164662228683300 ) ) ; +#3611 = CARTESIAN_POINT ( 'NONE', ( 4.842459200644149100, -94.71789415302710300, 15.10332031092389500 ) ) ; +#3612 = CARTESIAN_POINT ( 'NONE', ( 36.97833824896409300, -18.91461893897053800, 12.88697860798881200 ) ) ; +#3613 = CARTESIAN_POINT ( 'NONE', ( 33.49588073418456700, -10.00000000000000400, -25.40970920795647800 ) ) ; +#3614 = CARTESIAN_POINT ( 'NONE', ( 9.230021234885482400, -30.80573543277213100, 27.21708616704027500 ) ) ; +#3615 = CARTESIAN_POINT ( 'NONE', ( 35.48287600366516900, -30.84002847687794700, 23.69822405792894300 ) ) ; +#3616 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.57596123416667000, 12.92974142702295900 ) ) ; +#3617 = LINE ( 'NONE', #978, #6589 ) ; +#3618 = CARTESIAN_POINT ( 'NONE', ( 14.52883159279669600, -19.97146605947083500, 22.94688573136282300 ) ) ; +#3619 = CARTESIAN_POINT ( 'NONE', ( 5.980627713716490500, -31.10427894319921500, 24.99570083515492400 ) ) ; +#3620 = ORIENTED_EDGE ( 'NONE', *, *, #7423, .F. ) ; +#3621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3622 = CARTESIAN_POINT ( 'NONE', ( 22.55794980690657400, -33.35025653084935700, 26.50741664928542500 ) ) ; +#3623 = CARTESIAN_POINT ( 'NONE', ( 17.46403575070550200, -27.96616267483058500, 27.45684687246933500 ) ) ; +#3624 = CARTESIAN_POINT ( 'NONE', ( 3.852059992336810600, -30.75342469330868400, 22.30817824379467900 ) ) ; +#3625 = CARTESIAN_POINT ( 'NONE', ( 31.33900602082270800, -31.07114904097605300, 26.84726792403299500 ) ) ; +#3626 = CARTESIAN_POINT ( 'NONE', ( 36.42727564316079700, -30.59621541182837800, 21.70242235550387000 ) ) ; +#3627 = CYLINDRICAL_SURFACE ( 'NONE', #2486, 5.000000000000000900 ) ; +#3628 = CARTESIAN_POINT ( 'NONE', ( 6.855687943002071600, -22.03500000000001400, 14.33428432905299800 ) ) ; +#3629 = CARTESIAN_POINT ( 'NONE', ( 34.18426849218656800, -26.28176303307793300, 16.59192196790887800 ) ) ; +#3630 = PLANE ( 'NONE', #1460 ) ; +#3631 = CARTESIAN_POINT ( 'NONE', ( 8.950898451827402600, -31.04650580365473200, 27.00085101516836200 ) ) ; +#3632 = ORIENTED_EDGE ( 'NONE', *, *, #9378, .T. ) ; +#3633 = CARTESIAN_POINT ( 'NONE', ( 4.285082588659149900, -30.72244763416546900, 23.59017159129299300 ) ) ; +#3634 = CARTESIAN_POINT ( 'NONE', ( 28.73795059009335500, -8.884359852129671600, -24.80328254116888300 ) ) ; +#3635 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -94.17745555880691200, 15.26009936629608000 ) ) ; +#3636 = CARTESIAN_POINT ( 'NONE', ( 11.08505708521705700, -9.876651571902913300, -24.99999999999999600 ) ) ; +#3637 = ADVANCED_FACE ( 'NONE', ( #10035 ), #1145, .T. ) ; +#3638 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999998600, -12.50000000000001200, 7.732127782965245700 ) ) ; +#3639 = CARTESIAN_POINT ( 'NONE', ( 26.77829833683460600, -12.50000000000016700, -22.18632071112629900 ) ) ; +#3640 = EDGE_CURVE ( 'NONE', #12451, #1097, #10021, .T. ) ; +#3641 = CARTESIAN_POINT ( 'NONE', ( 35.37996413793035800, -10.00000000000000000, -25.45141924841189200 ) ) ; +#3642 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9022, #4459, #10147, #3434 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001664830913828903600 ), + .UNSPECIFIED. ) ; +#3643 = CARTESIAN_POINT ( 'NONE', ( 31.27983829281366100, -23.73406320051279300, 16.40909132175264400 ) ) ; +#3644 = CARTESIAN_POINT ( 'NONE', ( 33.16386249237756100, -29.72295250121779000, 25.90410592406700000 ) ) ; +#3645 = ORIENTED_EDGE ( 'NONE', *, *, #10312, .F. ) ; +#3646 = CARTESIAN_POINT ( 'NONE', ( 11.05966422435338200, -30.78696779403108200, 27.88354895415574600 ) ) ; +#3647 = CARTESIAN_POINT ( 'NONE', ( 14.20947246384836000, -19.17544876082762100, 23.05500115009039100 ) ) ; +#3648 = CARTESIAN_POINT ( 'NONE', ( 15.11733777340364400, -12.50000000000000500, -12.75283140493962200 ) ) ; +#3649 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3650 = CARTESIAN_POINT ( 'NONE', ( 24.87131797999056800, -12.49999999999997200, -12.78897505994911800 ) ) ; +#3651 = CARTESIAN_POINT ( 'NONE', ( 4.920868504872327500, -12.50000000000027000, 10.40262944547691300 ) ) ; +#3652 = CARTESIAN_POINT ( 'NONE', ( -9.410536043995276800E-016, 9.723972447247822600, 15.80114926534604800 ) ) ; +#3653 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -95.07596123493893000, 17.89374687377984300 ) ) ; +#3654 = CARTESIAN_POINT ( 'NONE', ( 10.36566546873096300, -95.07596123493894400, 15.71979342092874200 ) ) ; +#3655 = ORIENTED_EDGE ( 'NONE', *, *, #7624, .T. ) ; +#3656 = CARTESIAN_POINT ( 'NONE', ( 35.50718840825969400, -20.59001704872302700, 15.55315986149770400 ) ) ; +#3657 = CARTESIAN_POINT ( 'NONE', ( 36.65592812321888500, -20.14663973264070400, -16.70267791651480500 ) ) ; +#3658 = CARTESIAN_POINT ( 'NONE', ( -1.301730278319527400E-009, -9.999999999959470600, -20.05450421322258600 ) ) ; +#3659 = CARTESIAN_POINT ( 'NONE', ( 9.237891635571177300, -30.45162657458335400, 27.26122422733306600 ) ) ; +#3660 = CARTESIAN_POINT ( 'NONE', ( 35.41100061656790400, -29.38399499303053000, 24.04598346160917200 ) ) ; +#3661 = ORIENTED_EDGE ( 'NONE', *, *, #4056, .F. ) ; +#3662 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.22604312769871600, 7.833118756498435300 ) ) ; +#3663 = EDGE_CURVE ( 'NONE', #7223, #176, #2125, .T. ) ; +#3664 = CARTESIAN_POINT ( 'NONE', ( 9.252192528181987900, -20.15975743063462400, 20.70713730031591700 ) ) ; +#3665 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524034600, 6.754920151478380300 ) ) ; +#3666 = CARTESIAN_POINT ( 'NONE', ( 5.788676059352955100, -30.22655142660643100, 25.39424652046865200 ) ) ; +#3667 = VERTEX_POINT ( 'NONE', #11531 ) ; +#3668 = CARTESIAN_POINT ( 'NONE', ( 25.73570044446997300, -24.17799554769026900, 19.57331288513277600 ) ) ; +#3669 = CARTESIAN_POINT ( 'NONE', ( 3.885159953929364200, -9.999999999999998200, -21.99543431434969100 ) ) ; +#3670 = CARTESIAN_POINT ( 'NONE', ( 15.99477210005173500, -27.99878741904149800, 27.44663141960071000 ) ) ; +#3671 = CARTESIAN_POINT ( 'NONE', ( 14.07971483923065900, -10.00000000000000400, -29.00187203077981100 ) ) ; +#3672 = CARTESIAN_POINT ( 'NONE', ( 2.902055004313475200, -29.92158591081565400, 22.45504908406416400 ) ) ; +#3673 = VERTEX_POINT ( 'NONE', #10446 ) ; +#3674 = CARTESIAN_POINT ( 'NONE', ( 31.26724460453337400, -30.58240678322077200, 27.03887624348757900 ) ) ; +#3675 = CARTESIAN_POINT ( 'NONE', ( 17.45431510909717700, -28.77949532668908700, 29.18866828981624900 ) ) ; +#3676 = CARTESIAN_POINT ( 'NONE', ( 7.356451456607834100, -29.88646952772301900, 26.27042893869098700 ) ) ; +#3677 = CARTESIAN_POINT ( 'NONE', ( 37.12143338779736000, -29.28108144334013500, 21.98221882395077000 ) ) ; +#3678 = CARTESIAN_POINT ( 'NONE', ( 5.316543822095354700, -100.0000000000000100, -3.223838349584526000 ) ) ; +#3679 = CARTESIAN_POINT ( 'NONE', ( 37.41513381877063400, -28.23679786155559100, 14.68784968663433200 ) ) ; +#3680 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #14039, #7425, #783 ), + ( #8568, #1887, #9699 ), + ( #2987, #10832, #4101 ), + ( #11936, #5211, #13050 ), + ( #6341, #14150, #7478 ), + ( #839, #8622, #1936 ), + ( #9753, #12707, #6004 ), + ( #13807, #7129, #515 ), + ( #8280, #1603, #9604 ), + ( #2897, #10736, #4009 ), + ( #11846, #5121, #12957 ), + ( #6248, #14059, #7384 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -3.469446951953614200E-018, 0.002039315097803074500, 0.004078630195606152600, 0.006117945293409230600, 0.007137602842310769600, 0.008157260391212308600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9887332271578432900, 1.000000000000000000), + ( 1.000000000000000000, 0.9894844509913197600, 1.000000000000000000), + ( 1.000000000000000000, 0.9902570263579251200, 1.000000000000000000), + ( 1.000000000000000000, 0.9918460782231139900, 1.000000000000000000), + ( 1.000000000000000000, 0.9926633796726946900, 1.000000000000000000), + ( 1.000000000000000000, 0.9943336993125038200, 1.000000000000000000), + ( 1.000000000000000000, 0.9951882706395283100, 1.000000000000000000), + ( 1.000000000000000000, 0.9964782455710697900, 1.000000000000000000), + ( 1.000000000000000000, 0.9969122381931107000, 1.000000000000000000), + ( 1.000000000000000000, 0.9977538189170641600, 1.000000000000000000), + ( 1.000000000000000000, 0.9981612737449351300, 1.000000000000000000), + ( 1.000000000000000000, 0.9985249960690030200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3681 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3682 = ORIENTED_EDGE ( 'NONE', *, *, #7471, .T. ) ; +#3683 = EDGE_CURVE ( 'NONE', #11380, #13456, #5328, .T. ) ; +#3684 = CARTESIAN_POINT ( 'NONE', ( 4.139049482240438700, -29.66899371558325500, 23.87069590761682000 ) ) ; +#3685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.734723475976807100E-016 ) ) ; +#3686 = CARTESIAN_POINT ( 'NONE', ( 5.172684412464267500, -95.04805638700152300, 13.79850207169081600 ) ) ; +#3687 = CARTESIAN_POINT ( 'NONE', ( 10.37314409575164800, -10.57577327419107500, -24.99999999999969100 ) ) ; +#3688 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3689 = CARTESIAN_POINT ( 'NONE', ( 11.99734725251639000, -30.80112311557052300, 28.16391810987944000 ) ) ; +#3690 = ORIENTED_EDGE ( 'NONE', *, *, #13636, .F. ) ; +#3691 = CARTESIAN_POINT ( 'NONE', ( 23.39475578128993000, -12.50000000000000400, -14.37909750623064800 ) ) ; +#3692 = CARTESIAN_POINT ( 'NONE', ( 30.92070037475127700, -10.00000000000432000, -24.79482703642180800 ) ) ; +#3693 = AXIS2_PLACEMENT_3D ( 'NONE', #201, #7947, #1282 ) ; +#3694 = CARTESIAN_POINT ( 'NONE', ( 32.71984944430686700, -12.50000000000200600, 16.82003967155877100 ) ) ; +#3695 = CARTESIAN_POINT ( 'NONE', ( 33.30294625248235700, -30.45069740844289900, 25.98687376075944800 ) ) ; +#3696 = VERTEX_POINT ( 'NONE', #2667 ) ; +#3697 = CARTESIAN_POINT ( 'NONE', ( 11.16312825135972500, -30.82427677858207800, 27.90827751626980900 ) ) ; +#3698 = CARTESIAN_POINT ( 'NONE', ( 15.71857915490568500, -19.43840337192774800, 23.24731092089421800 ) ) ; +#3699 = CARTESIAN_POINT ( 'NONE', ( 5.334043444370343500, -22.10214790801672500, -14.82790013095156200 ) ) ; +#3700 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238600 ) ) ; +#3701 = CARTESIAN_POINT ( 'NONE', ( 33.93867941916409600, -21.80103429648423900, -16.98724104077275500 ) ) ; +#3702 = CIRCLE ( 'NONE', #7884, 3.189999999999995100 ) ; +#3703 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10919, #1967, #12020 ), + ( #5294, #13135, #6425 ), + ( #14229, #7561, #914 ), + ( #8705, #2013, #9827 ), + ( #3123, #10973, #4232 ), + ( #12068, #5342, #13180 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.001039526576916120800, 0.002713863127604241800, 0.004388199678292363000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6364349251880755400, 1.000000000000000000), + ( 1.000000000000000000, 0.6472463911067807300, 1.000000000000000000), + ( 1.000000000000000000, 0.6586083070632299300, 1.000000000000000000), + ( 1.000000000000000000, 0.6823533988201594400, 1.000000000000000000), + ( 1.000000000000000000, 0.6945580642697998200, 1.000000000000000000), + ( 1.000000000000000000, 0.7071025435595664800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3704 = CARTESIAN_POINT ( 'NONE', ( 9.970162357205111900, -19.92086196174492200, -25.05350916840623700 ) ) ; +#3705 = CARTESIAN_POINT ( 'NONE', ( 28.42344041722509500, -94.71799171670593900, 18.05781399322863500 ) ) ; +#3706 = CARTESIAN_POINT ( 'NONE', ( 16.32170137269049400, -95.07596123493895800, 17.89388302601123800 ) ) ; +#3707 = VERTEX_POINT ( 'NONE', #10495 ) ; +#3708 = EDGE_CURVE ( 'NONE', #4014, #9588, #9741, .T. ) ; +#3709 = CARTESIAN_POINT ( 'NONE', ( 34.42431789976073700, -19.97119753944484100, 17.26511951306386200 ) ) ; +#3710 = CARTESIAN_POINT ( 'NONE', ( 21.32311356408233400, -20.43278219571819300, -26.79262766451577300 ) ) ; +#3711 = CARTESIAN_POINT ( 'NONE', ( 9.336914610749827800, -30.94155738287755900, 27.21894858141957800 ) ) ; +#3712 = CARTESIAN_POINT ( 'NONE', ( 35.65498889665885000, -30.49021448544975500, 24.05893205576329300 ) ) ; +#3713 = FACE_OUTER_BOUND ( 'NONE', #1269, .T. ) ; +#3714 = ORIENTED_EDGE ( 'NONE', *, *, #8792, .T. ) ; +#3715 = CARTESIAN_POINT ( 'NONE', ( 17.60623885557837900, -28.77640292087739100, 29.18921356439604900 ) ) ; +#3716 = FACE_OUTER_BOUND ( 'NONE', #7730, .T. ) ; +#3717 = ADVANCED_FACE ( 'NONE', ( #10047 ), #9678, .F. ) ; +#3718 = CARTESIAN_POINT ( 'NONE', ( 2.546921467164545500, -21.12941722045438600, 9.029490477079765000 ) ) ; +#3719 = CARTESIAN_POINT ( 'NONE', ( 6.250595167443463200, -31.16377712825320100, 25.16699514996870200 ) ) ; +#3720 = CARTESIAN_POINT ( 'NONE', ( 33.71834814425020700, -23.26597501238840900, 13.06056455960876600 ) ) ; +#3721 = CARTESIAN_POINT ( 'NONE', ( 4.620035862069615400, -10.00000000000000000, -25.45141924840963600 ) ) ; +#3722 = CARTESIAN_POINT ( 'NONE', ( 9.831098347700418600, -97.48853244367761300, 20.98017711554414800 ) ) ; +#3723 = CARTESIAN_POINT ( 'NONE', ( -9.375905048268951600E-005, -9.999999999999996400, -12.75307253643271600 ) ) ; +#3724 = CARTESIAN_POINT ( 'NONE', ( 3.850314012651766300, -28.97032376784669700, 22.62189021961400200 ) ) ; +#3725 = CYLINDRICAL_SURFACE ( 'NONE', #12198, 15.00000000000000200 ) ; +#3726 = EDGE_CURVE ( 'NONE', #2517, #9917, #9869, .T. ) ; +#3727 = ORIENTED_EDGE ( 'NONE', *, *, #7252, .F. ) ; +#3728 = CARTESIAN_POINT ( 'NONE', ( 31.24981241178559100, -31.00113964297393600, 26.92619986269742000 ) ) ; +#3729 = CARTESIAN_POINT ( 'NONE', ( 0.03852496934829621100, 6.290433759120639400, -20.63077328774388500 ) ) ; +#3730 = CARTESIAN_POINT ( 'NONE', ( 7.472541557652967900, -30.80033534650931400, 26.34225603687541200 ) ) ; +#3731 = CARTESIAN_POINT ( 'NONE', ( 36.81469918728066700, -30.42730477546862700, 21.78170079771406300 ) ) ; +#3732 = CARTESIAN_POINT ( 'NONE', ( 22.43760561181288800, -31.29661376537659500, 28.74483239543690200 ) ) ; +#3733 = EDGE_LOOP ( 'NONE', ( #1035, #13390, #12884 ) ) ; +#3734 = CARTESIAN_POINT ( 'NONE', ( 4.659066096257323200, -30.98051622137248300, 23.55954097994729000 ) ) ; +#3735 = CARTESIAN_POINT ( 'NONE', ( 28.11923060896779300, -9.664038489779221300, 25.00000000000000000 ) ) ; +#3736 = CARTESIAN_POINT ( 'NONE', ( 10.08968178001455300, -11.49532564936360600, -25.05661269240242500 ) ) ; +#3737 = FACE_OUTER_BOUND ( 'NONE', #13694, .T. ) ; +#3738 = CARTESIAN_POINT ( 'NONE', ( 30.24637302650213000, -19.83028204762711200, -24.91179661777869500 ) ) ; +#3739 = CARTESIAN_POINT ( 'NONE', ( 7.213673521949340600, -28.37802120022054100, 24.59887593759816900 ) ) ; +#3740 = ORIENTED_EDGE ( 'NONE', *, *, #4261, .F. ) ; +#3741 = AXIS2_PLACEMENT_3D ( 'NONE', #11137, #4409, #12239 ) ; +#3742 = CARTESIAN_POINT ( 'NONE', ( 26.13820413955046000, -20.83911924651670600, -23.86012003153740600 ) ) ; +#3743 = CARTESIAN_POINT ( 'NONE', ( 25.56755993508516100, -19.18209810918353500, 23.10093313230846600 ) ) ; +#3744 = CARTESIAN_POINT ( 'NONE', ( 24.54160867801271800, -12.50000000000001200, 9.052268456566016800 ) ) ; +#3745 = CARTESIAN_POINT ( 'NONE', ( 33.16423568501884500, -31.16697490967756000, 25.65005964460154800 ) ) ; +#3746 = ORIENTED_EDGE ( 'NONE', *, *, #11175, .F. ) ; +#3747 = CARTESIAN_POINT ( 'NONE', ( 11.16283595828289600, -30.80928951538762600, 27.91083501898502200 ) ) ; +#3748 = CARTESIAN_POINT ( 'NONE', ( 17.23428796797560700, -19.69054658017920200, 23.29749638659850300 ) ) ; +#3749 = CARTESIAN_POINT ( 'NONE', ( 5.423073237571646400, -12.49999999999969800, -13.92264926904002600 ) ) ; +#3750 = CARTESIAN_POINT ( 'NONE', ( 34.84029172898090100, -22.21901974324604000, -13.99353051469976900 ) ) ; +#3751 = CARTESIAN_POINT ( 'NONE', ( 32.71698889924772400, -12.49999999999951900, -17.68249362430102400 ) ) ; +#3752 = EDGE_CURVE ( 'NONE', #1250, #9639, #10061, .T. ) ; +#3753 = CYLINDRICAL_SURFACE ( 'NONE', #10300, 5.000000000000000900 ) ; +#3754 = CARTESIAN_POINT ( 'NONE', ( 22.35931189927150700, -27.98724906675735700, 27.51084736717640700 ) ) ; +#3755 = CARTESIAN_POINT ( 'NONE', ( 31.15942717035923700, -95.07596123493894400, 15.11799739622275700 ) ) ; +#3756 = CARTESIAN_POINT ( 'NONE', ( 29.45391869669620300, -30.68146047568233900, 27.73457112219835400 ) ) ; +#3757 = CARTESIAN_POINT ( 'NONE', ( 37.79839571336986400, -18.80694826461790100, -11.70378783570188700 ) ) ; +#3758 = CARTESIAN_POINT ( 'NONE', ( 33.50654288107583100, -19.48359320927795600, 18.50079808337550300 ) ) ; +#3759 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3760 = CARTESIAN_POINT ( 'NONE', ( 11.77322951072393500, -11.31683091144135400, 24.51469912627207400 ) ) ; +#3761 = CARTESIAN_POINT ( 'NONE', ( 9.329981853172972400, -30.61257335187772100, 27.29334975027484200 ) ) ; +#3762 = CARTESIAN_POINT ( 'NONE', ( 35.16873449655418000, -29.20080458069418900, 24.05269079784045500 ) ) ; +#3763 = ORIENTED_EDGE ( 'NONE', *, *, #3856, .T. ) ; +#3764 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3765 = CARTESIAN_POINT ( 'NONE', ( 37.15208285240929300, -92.25049923906563300, 0.8498367078638375800 ) ) ; +#3766 = CARTESIAN_POINT ( 'NONE', ( 6.059143901159142600, -30.47805128230412200, 25.54767849006021800 ) ) ; +#3767 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10896, #13061, #850, #4160, #12000, #5270, #13111, #6405, #14208, #7539, #893, #8687, #1990, #9808, #3104, #10946, #4212, #12047, #5322, #13160, #6451, #14253, #7585, #940, #8726, #2041, #9852, #3146, #10994, #4262, #12091, #5365, #13206, #6495, #14295, #7632 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 4 ), + ( -5.999999999634490200E-008, 0.0003056126720467924300, 0.0006112853440935811400, 0.001222630688187159100, 0.002445321376374327000, 0.003668012064561495000, 0.004890702752748663100, 0.007336084129123003600, 0.008558774817310169100, 0.009781465505497332800, 0.01222684688187166200, 0.01344953757005883100, 0.01467222825824600000, 0.01589491894643316900, 0.01711760963462033100, 0.01834030032280749600, 0.01895164566690107200, 0.01925731833894786500, 0.01956299101099465800 ), + .UNSPECIFIED. ) ; +#3768 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -22.50000000000002100, 7.564513562858098600 ) ) ; +#3769 = CARTESIAN_POINT ( 'NONE', ( 9.277767413681443600, -12.50000000000084900, 18.99437739635251200 ) ) ; +#3770 = CARTESIAN_POINT ( 'NONE', ( 9.843029886525855000, -12.67052688913296700, -25.10188606636889500 ) ) ; +#3771 = CARTESIAN_POINT ( 'NONE', ( 15.37018613629065600, -19.95405905065415900, 23.09614948519745800 ) ) ; +#3772 = CARTESIAN_POINT ( 'NONE', ( 4.681075518882484400, -20.22740216314926800, -19.55052110830870800 ) ) ; +#3773 = EDGE_CURVE ( 'NONE', #90, #6638, #7375, .T. ) ; +#3774 = CARTESIAN_POINT ( 'NONE', ( 3.258510054887591600, -30.30640734200515500, 22.60863667504474600 ) ) ; +#3775 = EDGE_LOOP ( 'NONE', ( #5557, #2034, #11179, #8578 ) ) ; +#3776 = CARTESIAN_POINT ( 'NONE', ( 31.06094846402163200, -30.43626903628323900, 27.13569422130456100 ) ) ; +#3777 = CARTESIAN_POINT ( 'NONE', ( 5.095449832261871300, -18.58873339529010200, -20.86279599102470100 ) ) ; +#3778 = CARTESIAN_POINT ( 'NONE', ( 7.494463731890816900, -30.15188463107092400, 26.41855226941191900 ) ) ; +#3779 = CARTESIAN_POINT ( 'NONE', ( 36.51420061519673500, -29.00212726788133800, 22.20180162350957100 ) ) ; +#3780 = CARTESIAN_POINT ( 'NONE', ( 2.202743003830879500, -18.81097201532339400, 8.005331014629296900 ) ) ; +#3781 = CARTESIAN_POINT ( 'NONE', ( 4.194702065539964100, -30.05408474151063600, 24.09321860695252600 ) ) ; +#3782 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6691, #5555, #7831 ), + ( #1184, #8967, #2267 ), + ( #10095, #3393, #8043 ), + ( #1381, #9178, #2470 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001281590846018374900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9985249960690031300, 1.000000000000000000), + ( 1.000000000000000000, 0.9994383689087648100, 1.000000000000000000), + ( 1.000000000000000000, 0.9999349396180949900, 1.000000000000000000), + ( 1.000000000000000000, 0.9999939995909137300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3783 = CARTESIAN_POINT ( 'NONE', ( 17.58474748030703300, -33.18150031828981400, 28.41247604058364800 ) ) ; +#3784 = CARTESIAN_POINT ( 'NONE', ( 25.88206954125446700, -19.93592937496324400, -26.75197242722213200 ) ) ; +#3785 = ADVANCED_FACE ( 'NONE', ( #9341 ), #9480, .T. ) ; +#3786 = CARTESIAN_POINT ( 'NONE', ( 3.098461784876117800, -29.44871316622389700, 23.84023540620550100 ) ) ; +#3787 = CARTESIAN_POINT ( 'NONE', ( 25.36419816758709400, -12.49999999999999600, -22.60868623157009300 ) ) ; +#3788 = CARTESIAN_POINT ( 'NONE', ( 35.18205388973078800, -19.01638800903186400, 16.54842423341976600 ) ) ; +#3789 = ORIENTED_EDGE ( 'NONE', *, *, #12764, .F. ) ; +#3790 = CARTESIAN_POINT ( 'NONE', ( 33.77155008601683100, -23.24912152961266900, 12.94024172076133000 ) ) ; +#3791 = EDGE_CURVE ( 'NONE', #5085, #7720, #9695, .T. ) ; +#3792 = CARTESIAN_POINT ( 'NONE', ( 33.10067736764873600, -30.27043205081018600, 26.11104755899623700 ) ) ; +#3793 = CARTESIAN_POINT ( 'NONE', ( 2.554965323404598800, -28.44941163723090200, 13.30858559229614000 ) ) ; +#3794 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#3795 = CARTESIAN_POINT ( 'NONE', ( 39.90291286365119600, 10.18993461597465700, 17.86050372698884200 ) ) ; +#3796 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000200, -12.49999999999999500, -11.97268808056954400 ) ) ; +#3797 = CARTESIAN_POINT ( 'NONE', ( 28.04590845497091700, -20.94353891637760500, -23.11573481450166800 ) ) ; +#3798 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12839, #11729, #6123, #13931 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#3799 = FACE_BOUND ( 'NONE', #6393, .T. ) ; +#3800 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -10.00000000000000000, 25.00000000000000000 ) ) ; +#3801 = CARTESIAN_POINT ( 'NONE', ( 35.62750192259986900, -95.07596123493894400, 13.66531623102922000 ) ) ; +#3802 = CARTESIAN_POINT ( 'NONE', ( 31.12157124470408900, -30.28036455142073200, 27.09894823202285300 ) ) ; +#3803 = CARTESIAN_POINT ( 'NONE', ( 6.624150107193320200, -99.99999999999998600, -31.96792739358975100 ) ) ; +#3804 = CARTESIAN_POINT ( 'NONE', ( 31.72168556673225100, -19.10224539703503400, 20.30239719064296400 ) ) ; +#3805 = ORIENTED_EDGE ( 'NONE', *, *, #9140, .F. ) ; +#3806 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -97.57595464680710500, 13.49312408422001800 ) ) ; +#3807 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -17.49999999999999600 ) ) ; +#3808 = CARTESIAN_POINT ( 'NONE', ( 9.638588641412939100, -30.98105944792950300, 27.33247491294350000 ) ) ; +#3809 = CARTESIAN_POINT ( 'NONE', ( 35.62660085644899500, -30.22703685357025400, 24.27399482850892900 ) ) ; +#3810 = CARTESIAN_POINT ( 'NONE', ( 39.92224777120616600, 10.13028869250944000, -16.78864349177027600 ) ) ; +#3811 = CARTESIAN_POINT ( 'NONE', ( 33.61083704408660100, -94.72617562879901200, 15.98182647786891200 ) ) ; +#3812 = CARTESIAN_POINT ( 'NONE', ( 34.61297876791818600, -9.728939934402037100, 25.00000000000000400 ) ) ; +#3813 = CARTESIAN_POINT ( 'NONE', ( 6.241804784796679300, -29.58465936601069800, 25.45750743222597400 ) ) ; +#3814 = VECTOR ( 'NONE', #6570, 1000.000000000000100 ) ; +#3815 = CARTESIAN_POINT ( 'NONE', ( 41.95210614582927600, -10.00000000000000400, 7.857994749231171900 ) ) ; +#3816 = CARTESIAN_POINT ( 'NONE', ( 16.13703696028047200, -12.49999999999999300, 9.724848299087366100 ) ) ; +#3817 = CARTESIAN_POINT ( 'NONE', ( 22.51430459056876300, -27.96569311835696700, 27.45698462481016800 ) ) ; +#3818 = CARTESIAN_POINT ( 'NONE', ( 22.41870045143801700, -19.88145998868341700, 23.25763199520400100 ) ) ; +#3819 = ORIENTED_EDGE ( 'NONE', *, *, #6223, .T. ) ; +#3820 = CARTESIAN_POINT ( 'NONE', ( -1.951923169330332900, -10.00000000000000400, 8.022741993510113200 ) ) ; +#3821 = CARTESIAN_POINT ( 'NONE', ( 31.06647049109836100, -30.83045980808470400, 27.07879132085102100 ) ) ; +#3822 = CARTESIAN_POINT ( 'NONE', ( 2.853743677966099800, -29.14043941966739500, 21.70955414843459200 ) ) ; +#3823 = CARTESIAN_POINT ( 'NONE', ( 7.889262693608746000, -31.04369799596433000, 26.44882313660645700 ) ) ; +#3824 = CARTESIAN_POINT ( 'NONE', ( 37.27113325034928000, -30.06449585687368400, 21.99553783831012400 ) ) ; +#3825 = CARTESIAN_POINT ( 'NONE', ( 4.679037547264771400, -29.16094488808212000, 23.86437325994119300 ) ) ; +#3826 = CARTESIAN_POINT ( 'NONE', ( 39.94182338978954000, -10.23270733001574400, -12.84327995646436400 ) ) ; +#3827 = CARTESIAN_POINT ( 'NONE', ( 38.95684780061094400, -11.55786868697423300, -16.35136830775327300 ) ) ; +#3828 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3829 = ORIENTED_EDGE ( 'NONE', *, *, #3436, .F. ) ; +#3830 = CARTESIAN_POINT ( 'NONE', ( 37.98450209408630900, -11.89736398432789200, -18.74592009292171500 ) ) ; +#3831 = CARTESIAN_POINT ( 'NONE', ( 22.83523450260630500, -21.80170745198801500, -27.08095944221355800 ) ) ; +#3832 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -22.50000000000001400, 7.564513562858106600 ) ) ; +#3833 = CARTESIAN_POINT ( 'NONE', ( 22.95692672560659300, -12.49999999999999300, -14.50648805711814900 ) ) ; +#3834 = EDGE_CURVE ( 'NONE', #10492, #4686, #9853, .T. ) ; +#3835 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000000, -1.200000000000005700 ) ) ; +#3836 = ORIENTED_EDGE ( 'NONE', *, *, #7874, .T. ) ; +#3837 = CARTESIAN_POINT ( 'NONE', ( 34.68062976384946700, -12.50000000000060800, 12.67657162060455200 ) ) ; +#3838 = CARTESIAN_POINT ( 'NONE', ( 33.03685060273038900, -31.01614356976038100, 25.88007767876547400 ) ) ; +#3839 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991100, -27.09143239524032200, 6.754920151478385600 ) ) ; +#3840 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001400, 27.93780948130459400 ) ) ; +#3841 = CARTESIAN_POINT ( 'NONE', ( 30.10807440867158700, -22.29744973294927800, -25.07347966297077200 ) ) ; +#3842 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -90.07596123493895800, -4.350951650170483900 ) ) ; +#3843 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997300, 9.500000000000000000, -19.99999999999999600 ) ) ; +#3844 = ORIENTED_EDGE ( 'NONE', *, *, #6316, .T. ) ; +#3845 = AXIS2_PLACEMENT_3D ( 'NONE', #7255, #9578, #2874 ) ; +#3846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3847 = CARTESIAN_POINT ( 'NONE', ( 33.28399264431682500, -29.68861102629994200, 25.81439127023788400 ) ) ; +#3848 = CARTESIAN_POINT ( 'NONE', ( 15.84199828593764900, -99.99999999999998600, -38.28538062099280400 ) ) ; +#3849 = CARTESIAN_POINT ( 'NONE', ( 29.47612026202721200, -20.09553727003077100, 21.47240803507125100 ) ) ; +#3850 = EDGE_LOOP ( 'NONE', ( #7623, #6879 ) ) ; +#3851 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000900, 17.50000000000000400 ) ) ; +#3852 = CARTESIAN_POINT ( 'NONE', ( 36.27773398833330300, -20.72245090999795300, 13.96458858081010100 ) ) ; +#3853 = CARTESIAN_POINT ( 'NONE', ( 9.630183164678138400, -30.72118750405218200, 27.40033412824004700 ) ) ; +#3854 = CARTESIAN_POINT ( 'NONE', ( 35.16769360735646900, -31.02648360868125000, 23.72986396251985800 ) ) ; +#3855 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57596123254015200, 10.74922904676241200 ) ) ; +#3856 = EDGE_CURVE ( 'NONE', #6593, #11427, #7560, .T. ) ; +#3857 = CARTESIAN_POINT ( 'NONE', ( 29.19426613154712100, -93.15963138417343700, 22.01032468291853000 ) ) ; +#3858 = ADVANCED_FACE ( 'NONE', ( #8985 ), #8980, .F. ) ; +#3859 = CARTESIAN_POINT ( 'NONE', ( 27.06993106930785600, -11.79503796356001100, 24.68348637562840200 ) ) ; +#3860 = VERTEX_POINT ( 'NONE', #665 ) ; +#3861 = CARTESIAN_POINT ( 'NONE', ( 4.920048825260661100, -21.90469144436969300, 15.97636781796364000 ) ) ; +#3862 = CARTESIAN_POINT ( 'NONE', ( 31.26272317552614100, -10.52972867047375300, 23.84580192385926600 ) ) ; +#3863 = CARTESIAN_POINT ( 'NONE', ( 6.185351888732795600, -30.74018670179492600, 25.51719030420578000 ) ) ; +#3864 = CARTESIAN_POINT ( 'NONE', ( 39.52657373735468100, -11.89363965138390700, 8.020047357182637200 ) ) ; +#3865 = CARTESIAN_POINT ( 'NONE', ( 11.84403361335981400, -24.04880819277815700, 18.65333278978396000 ) ) ; +#3866 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6362, #5231, #9770, #10907, #4172, #12010, #5279, #13123, #6415, #14219, #7549, #902, #8695, #2002, #9815, #3112, #10960, #4222, #12056, #5333, #13170, #6461, #14262, #7597, #949 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000001900, 0.1875000000000004400, 0.2500000000000006700, 0.3750000000000009400, 0.4375000000000008900, 0.5000000000000008900, 0.6250000000000007800, 0.6875000000000006700, 0.7500000000000004400, 0.8125000000000003300, 0.8750000000000002200, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#3867 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3868 = CARTESIAN_POINT ( 'NONE', ( 39.90291286365118900, 10.18993461597465500, 0.3605037269888278800 ) ) ; +#3869 = ORIENTED_EDGE ( 'NONE', *, *, #2713, .T. ) ; +#3870 = AXIS2_PLACEMENT_3D ( 'NONE', #5153, #12991, #6280 ) ; +#3871 = CARTESIAN_POINT ( 'NONE', ( 0.002810816453500301400, -10.00000000000012400, 8.345944242901337500 ) ) ; +#3872 = CARTESIAN_POINT ( 'NONE', ( 30.95270587807896600, -30.33466685205743100, 27.17661622516590500 ) ) ; +#3873 = CARTESIAN_POINT ( 'NONE', ( 12.14047363388079000, -28.66208803700833500, 28.53712895315082700 ) ) ; +#3874 = CARTESIAN_POINT ( 'NONE', ( 7.848787361546798500, -30.47721685002351300, 26.62500235532487000 ) ) ; +#3875 = CARTESIAN_POINT ( 'NONE', ( 36.28269591074663900, -28.93519908531984400, 22.32519359013832300 ) ) ; +#3876 = ORIENTED_EDGE ( 'NONE', *, *, #5664, .F. ) ; +#3877 = EDGE_CURVE ( 'NONE', #7738, #12911, #9325, .T. ) ; +#3878 = CARTESIAN_POINT ( 'NONE', ( 4.294152707895183800, -30.33713631211456600, 24.12907739458967500 ) ) ; +#3879 = VECTOR ( 'NONE', #11146, 1000.000000000000000 ) ; +#3880 = CARTESIAN_POINT ( 'NONE', ( 16.45527082649277200, -39.49052192777160300, 19.80002530895945500 ) ) ; +#3881 = CARTESIAN_POINT ( 'NONE', ( 22.55762127725338200, -27.96664356551895700, 27.45669629599068900 ) ) ; +#3882 = ORIENTED_EDGE ( 'NONE', *, *, #11091, .T. ) ; +#3883 = CARTESIAN_POINT ( 'NONE', ( 34.68671926839810700, -22.03500000000001400, 10.50855678955379700 ) ) ; +#3884 = CIRCLE ( 'NONE', #10340, 1.200000000000013500 ) ; +#3885 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #7239, #13914, #8389, #1710 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 2.621177969715747100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9101521891143594700, 0.9101521891143594700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#3886 = CARTESIAN_POINT ( 'NONE', ( 29.55501748974261700, -30.79227571102373400, 27.68559118295672100 ) ) ; +#3887 = CARTESIAN_POINT ( 'NONE', ( 36.00353618480757200, -97.40649683660852500, 18.51608019222764800 ) ) ; +#3888 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3889 = CARTESIAN_POINT ( 'NONE', ( 22.55762127725337500, -27.96664356551895700, 27.45669629599068900 ) ) ; +#3890 = CARTESIAN_POINT ( 'NONE', ( 23.33881992018936600, -20.76638666597725100, -24.37745254608626400 ) ) ; +#3891 = CARTESIAN_POINT ( 'NONE', ( 24.81201702824536400, -12.50000000000001800, 8.544773286679943100 ) ) ; +#3892 = CARTESIAN_POINT ( 'NONE', ( 32.94696882557665400, -29.96565929982285700, 26.12718265932666000 ) ) ; +#3893 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 15.51856112887630200 ) ) ; +#3894 = CARTESIAN_POINT ( 'NONE', ( 37.12967917951405600, -21.51166616748855600, -15.19720728217860600 ) ) ; +#3895 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -97.57596123493890200, 10.74919030742617200 ) ) ; +#3896 = VECTOR ( 'NONE', #14362, 1000.000000000000000 ) ; +#3897 = ORIENTED_EDGE ( 'NONE', *, *, #8084, .F. ) ; +#3898 = VECTOR ( 'NONE', #11730, 1000.000000000000000 ) ; +#3899 = DIRECTION ( 'NONE', ( 0.2600637432274496800, 0.0000000000000000000, 0.9655914505931209000 ) ) ; +#3900 = CARTESIAN_POINT ( 'NONE', ( 35.18935139501869700, -29.19257094919433400, 24.02416384306986800 ) ) ; +#3901 = CARTESIAN_POINT ( 'NONE', ( 28.14202666943565800, -19.74346635802578800, 22.16345510635149200 ) ) ; +#3902 = ORIENTED_EDGE ( 'NONE', *, *, #8935, .F. ) ; +#3903 = DIRECTION ( 'NONE', ( -0.9998119252975813400, 0.01909902633496520300, 0.003367673648115719800 ) ) ; +#3904 = CARTESIAN_POINT ( 'NONE', ( 25.91291606043505500, -19.97763207705947500, 22.86904002264469000 ) ) ; +#3905 = CARTESIAN_POINT ( 'NONE', ( 9.638612512260166900, -30.47391912912729900, 27.42183686243878800 ) ) ; +#3906 = CARTESIAN_POINT ( 'NONE', ( 35.57604086517925900, -29.96526501156684900, 24.31428122850334700 ) ) ; +#3907 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -95.10391797849574400, 7.304666556797888800 ) ) ; +#3908 = CARTESIAN_POINT ( 'NONE', ( 24.88228815507150000, -97.51416821464768200, 21.99143611181197100 ) ) ; +#3909 = LINE ( 'NONE', #3157, #3209 ) ; +#3910 = ORIENTED_EDGE ( 'NONE', *, *, #5292, .F. ) ; +#3911 = CARTESIAN_POINT ( 'NONE', ( 27.74522168997166800, -10.34719131786753500, 24.93878080319223000 ) ) ; +#3912 = CARTESIAN_POINT ( 'NONE', ( 13.99953127095436200, -20.01384545781222000, 22.81373943744310800 ) ) ; +#3913 = CARTESIAN_POINT ( 'NONE', ( 6.233641691553104100, -29.87947419258733100, 25.60217323750993000 ) ) ; +#3914 = CARTESIAN_POINT ( 'NONE', ( 39.99718915673749100, -9.999999999999662500, 8.345945866314318500 ) ) ; +#3915 = AXIS2_PLACEMENT_3D ( 'NONE', #2820, #3944, #11777 ) ; +#3916 = CARTESIAN_POINT ( 'NONE', ( 11.95270062996339400, -12.49999999999999300, 20.76567174050639900 ) ) ; +#3917 = CARTESIAN_POINT ( 'NONE', ( 13.24260276043752400, -11.52269762474486300, 24.73150732529680000 ) ) ; +#3918 = EDGE_LOOP ( 'NONE', ( #7044, #10785 ) ) ; +#3919 = CARTESIAN_POINT ( 'NONE', ( 0.5528245916996006300, -11.89127446843243500, 9.722279819864665400 ) ) ; +#3920 = EDGE_CURVE ( 'NONE', #2204, #8998, #8999, .T. ) ; +#3921 = CARTESIAN_POINT ( 'NONE', ( 30.97086820961062900, -30.71775635133548500, 27.15072101873960600 ) ) ; +#3922 = CARTESIAN_POINT ( 'NONE', ( 11.40110603994863000, -27.25264590180146100, 20.68912723575912300 ) ) ; +#3923 = CARTESIAN_POINT ( 'NONE', ( 8.091297440532535700, -31.11532222772978100, 26.51916634090759900 ) ) ; +#3924 = CARTESIAN_POINT ( 'NONE', ( 37.31034148587563200, -29.74622587767983400, 22.16457331683985300 ) ) ; +#3925 = ORIENTED_EDGE ( 'NONE', *, *, #8311, .T. ) ; +#3926 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.511547099454124200, 20.00000000000000000 ) ) ; +#3927 = CARTESIAN_POINT ( 'NONE', ( 4.694580582845696300, -29.24217318300349100, 23.98081901380316000 ) ) ; +#3928 = CARTESIAN_POINT ( 'NONE', ( 13.24280234787692800, -31.89480662235194000, 20.52754327233096600 ) ) ; +#3929 = CARTESIAN_POINT ( 'NONE', ( 37.31072256192193500, -95.07596123493894400, -2.472754691319195300 ) ) ; +#3930 = CARTESIAN_POINT ( 'NONE', ( 38.13808219055972900, -10.10626904135568400, 18.39968601488595500 ) ) ; +#3931 = VERTEX_POINT ( 'NONE', #1757 ) ; +#3932 = CARTESIAN_POINT ( 'NONE', ( 32.70383782689199800, -100.0000000000000100, 1.264554945771519500 ) ) ; +#3933 = CARTESIAN_POINT ( 'NONE', ( 29.55554517527305700, -30.90302545462797200, 27.66109328080775100 ) ) ; +#3934 = CARTESIAN_POINT ( 'NONE', ( 30.11771964037729900, -100.0000000000000700, 20.54931069798304200 ) ) ; +#3935 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3936 = ADVANCED_FACE ( 'NONE', ( #8838 ), #8387, .T. ) ; +#3937 = CARTESIAN_POINT ( 'NONE', ( 3.550532966968376500, -30.55079519729966000, 21.46087037243996700 ) ) ; +#3938 = FACE_OUTER_BOUND ( 'NONE', #5510, .T. ) ; +#3939 = CARTESIAN_POINT ( 'NONE', ( 22.49264576486652700, -27.96523496585092500, 27.45710953202296500 ) ) ; +#3940 = CARTESIAN_POINT ( 'NONE', ( 34.40916322769129500, -23.02637387375945000, 11.33978811070188200 ) ) ; +#3941 = CARTESIAN_POINT ( 'NONE', ( 33.00728194654880100, -30.72933932202478100, 26.08793674195432600 ) ) ; +#3942 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.00000000000000000, -22.49999999999999600 ) ) ; +#3943 = CARTESIAN_POINT ( 'NONE', ( 28.52097442707865900, -10.21062104609012700, -25.03459841193806300 ) ) ; +#3944 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3945 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -2.500000000000016900, 25.00000000000000000 ) ) ; +#3946 = CARTESIAN_POINT ( 'NONE', ( 16.02499393741962000, -20.77548354332633100, -24.31308809375356000 ) ) ; +#3947 = ORIENTED_EDGE ( 'NONE', *, *, #13229, .T. ) ; +#3948 = EDGE_CURVE ( 'NONE', #11308, #13418, #8796, .T. ) ; +#3949 = CARTESIAN_POINT ( 'NONE', ( 35.39372608149890500, -10.01537258320352200, -24.99999999999999600 ) ) ; +#3950 = CARTESIAN_POINT ( 'NONE', ( 35.93575870332060200, -29.01677253092397600, 22.98779717881685900 ) ) ; +#3951 = CARTESIAN_POINT ( 'NONE', ( 8.093408832253004400, -99.99999999999997200, 19.96500264702517300 ) ) ; +#3952 = CARTESIAN_POINT ( 'NONE', ( 26.74866215477161200, -19.44296977446794700, 22.72394425124493700 ) ) ; +#3953 = CARTESIAN_POINT ( 'NONE', ( 34.52524706999627600, -94.72219806545337000, 15.44556310733653600 ) ) ; +#3954 = CARTESIAN_POINT ( 'NONE', ( 9.833092629944882600, -30.78857905392737100, 27.46553639839622500 ) ) ; +#3955 = CARTESIAN_POINT ( 'NONE', ( 35.26001230841319500, -30.91548187783455100, 23.86730375853911900 ) ) ; +#3956 = CARTESIAN_POINT ( 'NONE', ( 36.35313880365189500, -93.88192333451034700, 5.240109433607455200 ) ) ; +#3957 = CARTESIAN_POINT ( 'NONE', ( 2.397985565850600000, -19.59263331547092300, 7.775504308996516100 ) ) ; +#3958 = CARTESIAN_POINT ( 'NONE', ( 39.52641169199954200, -11.89333234645399700, 8.234698369942552900 ) ) ; +#3959 = CARTESIAN_POINT ( 'NONE', ( 6.453009701346223500, -31.05746846633834200, 25.46093360714057100 ) ) ; +#3960 = CARTESIAN_POINT ( 'NONE', ( 41.86089351334096900, -10.00000000000000500, 9.962049084749985200 ) ) ; +#3961 = CARTESIAN_POINT ( 'NONE', ( 16.60524421871240700, -12.50000000000000200, 9.970922988520021200 ) ) ; +#3962 = EDGE_CURVE ( 'NONE', #11515, #7318, #8996, .T. ) ; +#3963 = CARTESIAN_POINT ( 'NONE', ( -1.155693015105516500, -10.00000000000000500, 13.59578516486153700 ) ) ; +#3964 = CARTESIAN_POINT ( 'NONE', ( 30.95176491788061700, -31.03766609992174400, 27.05050572287139900 ) ) ; +#3965 = CARTESIAN_POINT ( 'NONE', ( 8.454568147710052300, -20.56718304446414400, 20.05776070514022500 ) ) ; +#3966 = CARTESIAN_POINT ( 'NONE', ( 8.041751662806559500, -30.63131812090454200, 26.70225741769566600 ) ) ; +#3967 = CARTESIAN_POINT ( 'NONE', ( 36.28451072233566100, -30.68349037005853600, 22.01629661962282100 ) ) ; +#3968 = CYLINDRICAL_SURFACE ( 'NONE', #12116, 1.200000000000005700 ) ; +#3969 = CARTESIAN_POINT ( 'NONE', ( 2.499999999995544900, -95.26318031279002700, 10.28785978983704500 ) ) ; +#3970 = ORIENTED_EDGE ( 'NONE', *, *, #11031, .T. ) ; +#3971 = CARTESIAN_POINT ( 'NONE', ( 4.555706983110650500, -30.70456288787082100, 24.02935268112311100 ) ) ; +#3972 = CARTESIAN_POINT ( 'NONE', ( 8.653431398346835800, -32.49306459112588600, 26.40884949339475100 ) ) ; +#3973 = CARTESIAN_POINT ( 'NONE', ( 35.56477187982724800, -89.64557226224586400, 3.275176570733386400 ) ) ; +#3974 = CARTESIAN_POINT ( 'NONE', ( 28.80424908285671000, -22.03500000000001400, 18.64806215916629700 ) ) ; +#3975 = CARTESIAN_POINT ( 'NONE', ( 29.24731883057182100, -30.78740759512516300, 27.78745382836186900 ) ) ; +#3976 = CARTESIAN_POINT ( 'NONE', ( -2.685517959269759200E-015, 8.699416875992934500, 20.22352373746558700 ) ) ; +#3977 = CARTESIAN_POINT ( 'NONE', ( 16.33707368133799800, -19.18949841699703600, 23.36467695346054900 ) ) ; +#3978 = CARTESIAN_POINT ( 'NONE', ( 3.359156363877753700, -30.47326289607460800, 21.47454124755815000 ) ) ; +#3979 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12098, #2594, #8220, #1551 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004719209247254021300 ), + .UNSPECIFIED. ) ; +#3980 = FACE_OUTER_BOUND ( 'NONE', #1929, .T. ) ; +#3981 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#3982 = CARTESIAN_POINT ( 'NONE', ( 35.01175524633130500, -12.49999999999770700, 11.03549645634651100 ) ) ; +#3983 = EDGE_CURVE ( 'NONE', #12041, #11029, #8675, .T. ) ; +#3984 = CARTESIAN_POINT ( 'NONE', ( 32.63916457994928100, -29.86928237004556400, 26.26657428758126400 ) ) ; +#3985 = CARTESIAN_POINT ( 'NONE', ( 3.563047595085123500, -27.92073578006886000, 6.516796014226113000 ) ) ; +#3986 = ORIENTED_EDGE ( 'NONE', *, *, #11861, .T. ) ; +#3987 = CARTESIAN_POINT ( 'NONE', ( 29.39659705468704200, -10.36288311643842200, -25.00000000000058600 ) ) ; +#3988 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23116646380259100, -11.74895849411024600 ) ) ; +#3989 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.04531648070944500, 16.23785755017209500 ) ) ; +#3990 = CARTESIAN_POINT ( 'NONE', ( 14.93854568316582900, -12.50000000000084200, -22.68076556109482000 ) ) ; +#3991 = CARTESIAN_POINT ( 'NONE', ( 12.80644691893621700, -12.53095427001756500, 24.44764618424598600 ) ) ; +#3992 = CARTESIAN_POINT ( 'NONE', ( 36.42250612414676400, -28.89198365717222600, 21.94051374557698300 ) ) ; +#3993 = CARTESIAN_POINT ( 'NONE', ( 2.500551666394682700, -21.21984131744006100, 7.920870232500869100 ) ) ; +#3994 = CARTESIAN_POINT ( 'NONE', ( 25.29036372294284600, -19.17838512846939000, 23.14952914109868900 ) ) ; +#3995 = CARTESIAN_POINT ( 'NONE', ( 14.09096882225758100, -12.50000000000028400, 21.58926221002624900 ) ) ; +#3996 = CARTESIAN_POINT ( 'NONE', ( 9.836642930804453400, -30.55916139321279700, 27.49499828330419100 ) ) ; +#3997 = CARTESIAN_POINT ( 'NONE', ( 35.23029900159814800, -29.56818310177792600, 24.37851211083699700 ) ) ; +#3998 = CARTESIAN_POINT ( 'NONE', ( 8.717997834732646100, -23.73385805392479500, 16.40695011875593300 ) ) ; +#3999 = ORIENTED_EDGE ( 'NONE', *, *, #13957, .F. ) ; +#4000 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -90.97465602824668500, -3.162233253516521600 ) ) ; +#4001 = CARTESIAN_POINT ( 'NONE', ( 3.641465753833802700, -18.96630462833641700, 14.48782885892063600 ) ) ; +#4002 = ADVANCED_FACE ( 'NONE', ( #8649 ), #9103, .F. ) ; +#4003 = CARTESIAN_POINT ( 'NONE', ( 2.499391743716896700, -20.40595604708849500, 7.887985659609001700 ) ) ; +#4004 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -90.07596123493894400, 10.95758058754439400 ) ) ; +#4005 = CARTESIAN_POINT ( 'NONE', ( 6.340739863982310700, -30.27382056019164500, 25.76042017598502200 ) ) ; +#4006 = CARTESIAN_POINT ( 'NONE', ( 33.59873220929841900, -18.54969666303045300, -22.46584961818842900 ) ) ; +#4007 = EDGE_LOOP ( 'NONE', ( #5071, #5711, #12112, #10220 ) ) ; +#4008 = CARTESIAN_POINT ( 'NONE', ( 38.82856542762004900, -11.88724837804993800, 12.91527876164072100 ) ) ; +#4009 = CARTESIAN_POINT ( 'NONE', ( 16.07873928161640400, -18.49451149502699100, 23.50218843548859800 ) ) ; +#4010 = CARTESIAN_POINT ( 'NONE', ( 13.81036266853410200, -24.15865002263619100, 19.43619549361410700 ) ) ; +#4011 = CARTESIAN_POINT ( 'NONE', ( 31.78875273609180900, -12.52885771323520600, -24.58323515230847200 ) ) ; +#4012 = CARTESIAN_POINT ( 'NONE', ( 3.057325077241292500, -20.11267528049084100, -15.70126861586459200 ) ) ; +#4013 = CARTESIAN_POINT ( 'NONE', ( 2.869104376492739700, -9.999999999999081600, 17.80256049223714500 ) ) ; +#4014 = VERTEX_POINT ( 'NONE', #2400 ) ; +#4015 = CARTESIAN_POINT ( 'NONE', ( 30.77123909161196000, -30.65129557494356000, 27.24738585477641800 ) ) ; +#4016 = CARTESIAN_POINT ( 'NONE', ( 3.641505470641854400, -28.87712739319279700, 22.01599472013111500 ) ) ; +#4017 = CARTESIAN_POINT ( 'NONE', ( 8.091163004204757300, -30.07083013848701100, 26.70360992425837300 ) ) ; +#4018 = CARTESIAN_POINT ( 'NONE', ( 36.89871416695754600, -29.44915903811824600, 22.53504230278366500 ) ) ; +#4019 = VERTEX_POINT ( 'NONE', #8017 ) ; +#4020 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -96.63408478952935400, 6.393891568607632100 ) ) ; +#4021 = CARTESIAN_POINT ( 'NONE', ( 4.555698356112399600, -29.60442316338045600, 24.22334528861216900 ) ) ; +#4022 = CARTESIAN_POINT ( 'NONE', ( 7.982302086775316500, -37.55838243924006300, 16.69312461151022500 ) ) ; +#4023 = CARTESIAN_POINT ( 'NONE', ( 32.57777927231942500, -95.07596123493894400, 13.24180778520150900 ) ) ; +#4024 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.677008887399560800, 11.21483619377717200 ) ) ; +#4025 = CARTESIAN_POINT ( 'NONE', ( 23.33336499485021800, -100.0000000000000100, 6.630571736238752400 ) ) ; +#4026 = CARTESIAN_POINT ( 'NONE', ( 29.24840950673451100, -30.86883660609272400, 27.77131748946094800 ) ) ; +#4027 = CARTESIAN_POINT ( 'NONE', ( 30.21968153550745800, -99.99999999999997200, 20.51727694122846700 ) ) ; +#4028 = VERTEX_POINT ( 'NONE', #1359 ) ; +#4029 = CARTESIAN_POINT ( 'NONE', ( 36.26353743213266500, -30.69365296509431900, 22.05310396605014100 ) ) ; +#4030 = EDGE_CURVE ( 'NONE', #9541, #13204, #9279, .T. ) ; +#4031 = CARTESIAN_POINT ( 'NONE', ( 2.601646526981081100, -29.44204814015399000, 21.65637129200299800 ) ) ; +#4032 = CARTESIAN_POINT ( 'NONE', ( 5.644131370910590900, -20.28809933266904900, -15.63794649633032400 ) ) ; +#4033 = CARTESIAN_POINT ( 'NONE', ( 24.94504245395327800, -12.50000000000001200, 8.102211558343190800 ) ) ; +#4034 = CARTESIAN_POINT ( 'NONE', ( 32.73708079984103800, -30.56668369667536900, 26.30628078337286600 ) ) ; +#4035 = CARTESIAN_POINT ( 'NONE', ( 22.43866206969477900, -30.66176281334874100, 28.85677374700785700 ) ) ; +#4036 = VERTEX_POINT ( 'NONE', #11358 ) ; +#4037 = CARTESIAN_POINT ( 'NONE', ( 30.20788164760320200, -10.95279079453336900, -24.99999999999999600 ) ) ; +#4038 = DIRECTION ( 'NONE', ( -7.103262821921560300E-016, 3.469446951953615700E-016, -1.000000000000000000 ) ) ; +#4039 = DIRECTION ( 'NONE', ( -0.9704395131766681000, 0.02183837816424355800, 0.2403543977225858500 ) ) ; +#4040 = CARTESIAN_POINT ( 'NONE', ( 16.62696576667283200, -12.49999999999999800, -14.38764568792860600 ) ) ; +#4041 = AXIS2_PLACEMENT_3D ( 'NONE', #9400, #2702, #10529 ) ; +#4042 = CARTESIAN_POINT ( 'NONE', ( 9.481160158569270600, -8.548210740858806400, 25.00000000000000700 ) ) ; +#4043 = CARTESIAN_POINT ( 'NONE', ( 8.559430611286163800, -11.32714364211293500, -24.99999999999999600 ) ) ; +#4044 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -95.07596123493894400, 22.49881262457338200 ) ) ; +#4045 = VERTEX_POINT ( 'NONE', #4717 ) ; +#4046 = CARTESIAN_POINT ( 'NONE', ( 23.26876731164532300, -19.94746853738354300, 23.23452666743851200 ) ) ; +#4047 = CARTESIAN_POINT ( 'NONE', ( 17.08425501133089200, -12.50000000000002300, 10.10587296192205100 ) ) ; +#4048 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -96.23082734627031700, 5.350767952306220800 ) ) ; +#4049 = CARTESIAN_POINT ( 'NONE', ( 0.09712465669868142200, 10.19006527892301500, -17.14065433413488300 ) ) ; +#4050 = CARTESIAN_POINT ( 'NONE', ( 10.24027948711089500, -30.86834764868421400, 27.59762364712083000 ) ) ; +#4051 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10309, #3607, #4712, #12550, #5845, #13651, #6964, #356 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0004572459325053814600, 0.003490597501248774500, 0.005007273285620468700, 0.006523949069992162500 ), + .UNSPECIFIED. ) ; +#4052 = CARTESIAN_POINT ( 'NONE', ( 35.34827333012899700, -30.59769904819778200, 24.30659679657529900 ) ) ; +#4053 = CARTESIAN_POINT ( 'NONE', ( 8.288903322382994400, -12.50000000000034800, 18.04082358895631400 ) ) ; +#4054 = ORIENTED_EDGE ( 'NONE', *, *, #8875, .T. ) ; +#4055 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438940000, 7.359625249920309600, -20.69000000000000100 ) ) ; +#4056 = EDGE_CURVE ( 'NONE', #10492, #6075, #8304, .T. ) ; +#4057 = CARTESIAN_POINT ( 'NONE', ( 12.58218985134549700, -19.17014474584879800, 22.61371277418348000 ) ) ; +#4058 = CARTESIAN_POINT ( 'NONE', ( 2.500604229805806000, -21.21993215635100300, 7.927162234288905700 ) ) ; +#4059 = CARTESIAN_POINT ( 'NONE', ( 36.72382378925062300, -11.88235158691395600, 17.54576257063850900 ) ) ; +#4060 = CARTESIAN_POINT ( 'NONE', ( 6.580750636732556600, -31.16865972480190500, 25.44616144839582000 ) ) ; +#4061 = CARTESIAN_POINT ( 'NONE', ( 3.889618395642577800, -7.499999993154934200, 24.90746214474458100 ) ) ; +#4062 = CARTESIAN_POINT ( 'NONE', ( 37.13086885121509800, -9.999999999999079800, 17.80260194559387100 ) ) ; +#4063 = ORIENTED_EDGE ( 'NONE', *, *, #6014, .F. ) ; +#4064 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999985800, -99.99999999999998600, 2.663723558220575500E-015 ) ) ; +#4065 = CARTESIAN_POINT ( 'NONE', ( 4.242559813390939500, -18.61972354150855900, -19.57081220812578000 ) ) ; +#4066 = CARTESIAN_POINT ( 'NONE', ( 6.301867240448771700, -11.87946584753729900, 21.03210587048646800 ) ) ; +#4067 = LINE ( 'NONE', #14373, #4083 ) ; +#4068 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4069 = EDGE_LOOP ( 'NONE', ( #12681, #4203, #3327, #12093 ) ) ; +#4070 = CARTESIAN_POINT ( 'NONE', ( 30.75820256778480300, -30.99652190052039200, 27.15607338291185300 ) ) ; +#4071 = VECTOR ( 'NONE', #6120, 1000.000000000000000 ) ; +#4072 = CARTESIAN_POINT ( 'NONE', ( 5.815789055738272300, -26.28177676803318300, 16.59199144975763600 ) ) ; +#4073 = CARTESIAN_POINT ( 'NONE', ( 8.341255187246252600, -30.78786998399245800, 26.80958925592077300 ) ) ; +#4074 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9121, #1325, #10248 ), + ( #3533, #11375, #4644 ), + ( #12483, #5767, #13578 ), + ( #6892, #287, #8035 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01585894569432141600, 0.01601238227669425300 ), + ( 0.1647038598398097900, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9208819032634709700, 0.7598171141420762000, 1.000000000000000000), + ( 0.9208861891527992900, 0.7598301250373049600, 1.000000000000000000), + ( 0.9208884581692655700, 0.7598370132075900100, 1.000000000000000000), + ( 0.9208887058694108500, 0.7598377651636936100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4075 = CARTESIAN_POINT ( 'NONE', ( 36.39632302416232800, -30.62796048625604000, 22.32484216718893000 ) ) ; +#4076 = CARTESIAN_POINT ( 'NONE', ( 3.128894662435122600, -92.95357113377885100, 2.611388197521582900 ) ) ; +#4077 = EDGE_CURVE ( 'NONE', #7550, #2795, #10067, .T. ) ; +#4078 = CARTESIAN_POINT ( 'NONE', ( 4.799984983772551700, -30.97963812200357800, 23.80245338175603100 ) ) ; +#4079 = CARTESIAN_POINT ( 'NONE', ( 6.829702627657998600, -31.32021948652602800, 16.83663281739689300 ) ) ; +#4080 = CARTESIAN_POINT ( 'NONE', ( 24.33571142264224500, -95.07596123492979200, 9.913781257753985400 ) ) ; +#4081 = CARTESIAN_POINT ( 'NONE', ( 1.920154069844452800, -10.08750627566479200, 18.60306588841807200 ) ) ; +#4082 = DIRECTION ( 'NONE', ( -0.9997148815268583900, 0.02351517291302214800, 0.004146359440586259000 ) ) ; +#4083 = VECTOR ( 'NONE', #2154, 1000.000000000000000 ) ; +#4084 = CARTESIAN_POINT ( 'NONE', ( 29.14507019420367900, -30.77117760528641500, 27.82266813273831800 ) ) ; +#4085 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999996400, -20.00069905418674000, -11.72603109299552500 ) ) ; +#4086 = CARTESIAN_POINT ( 'NONE', ( 6.763359963026559300, -18.54088238239249300, -22.82935076963506700 ) ) ; +#4087 = ADVANCED_FACE ( 'NONE', ( #8488 ), #10922, .F. ) ; +#4088 = CARTESIAN_POINT ( 'NONE', ( 39.52919310960471900, -11.88322756158114400, 8.020537039599050300 ) ) ; +#4089 = ORIENTED_EDGE ( 'NONE', *, *, #10738, .T. ) ; +#4090 = CARTESIAN_POINT ( 'NONE', ( 35.94436953495924300, -30.83114890803401700, 22.65322171132196200 ) ) ; +#4091 = CARTESIAN_POINT ( 'NONE', ( 3.558535961903625200, -30.56547710103132300, 21.52611180921631400 ) ) ; +#4092 = CARTESIAN_POINT ( 'NONE', ( 8.056627639132537800, -100.0000000000000300, -33.98982960013367500 ) ) ; +#4093 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -22.55303827702114100, 7.948974941906527600 ) ) ; +#4094 = CARTESIAN_POINT ( 'NONE', ( 32.63891115132744900, -31.15538746804908100, 26.03938578270740900 ) ) ; +#4095 = ORIENTED_EDGE ( 'NONE', *, *, #2564, .T. ) ; +#4096 = CARTESIAN_POINT ( 'NONE', ( 30.21871422859010500, -12.68774362112981900, -25.08707456830838500 ) ) ; +#4097 = CARTESIAN_POINT ( 'NONE', ( 7.147900861185372700, -9.632503373171207500, 25.00000000000000000 ) ) ; +#4098 = CARTESIAN_POINT ( 'NONE', ( 12.22215774398667400, -20.92648587773451000, -23.23802317835751900 ) ) ; +#4099 = CARTESIAN_POINT ( 'NONE', ( -1.526553973460746500, -95.07596123493894400, 2.049002866222468600 ) ) ; +#4100 = CYLINDRICAL_SURFACE ( 'NONE', #10435, 3.189999999999995100 ) ; +#4101 = CARTESIAN_POINT ( 'NONE', ( 13.68849067974075600, -12.96971184473345900, 24.47635967684400200 ) ) ; +#4102 = CARTESIAN_POINT ( 'NONE', ( 14.86633150774183900, -95.07596123493894400, 15.82508929694919800 ) ) ; +#4103 = ORIENTED_EDGE ( 'NONE', *, *, #8580, .F. ) ; +#4104 = CARTESIAN_POINT ( 'NONE', ( 17.09259636144297200, -24.23648177581297600, 19.98972415255990500 ) ) ; +#4105 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4106 = CARTESIAN_POINT ( 'NONE', ( 10.24009028487224700, -30.70858870493609400, 27.62776880457465000 ) ) ; +#4107 = CARTESIAN_POINT ( 'NONE', ( 34.90445930195404100, -29.29161612497494400, 24.38336205318474000 ) ) ; +#4108 = CARTESIAN_POINT ( 'NONE', ( 15.93774329506890400, -12.49999999999999800, 9.576327172782107800 ) ) ; +#4109 = VERTEX_POINT ( 'NONE', #8320 ) ; +#4110 = CARTESIAN_POINT ( 'NONE', ( 16.04204732471366800, -28.02249633935271300, 27.50536197151918900 ) ) ; +#4111 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#4112 = CARTESIAN_POINT ( 'NONE', ( 2.198712827206296800, -18.79511659176218800, 7.996602439517259200 ) ) ; +#4113 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4114 = CARTESIAN_POINT ( 'NONE', ( 6.422345284656000100, -30.48312549533488200, 25.79828010981598800 ) ) ; +#4115 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -3.189999999999994200 ) ) ; +#4116 = VECTOR ( 'NONE', #10198, 1000.000000000000000 ) ; +#4117 = CARTESIAN_POINT ( 'NONE', ( 35.30497722642870400, -10.00000000000000700, 22.84519017103381300 ) ) ; +#4118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4119 = CARTESIAN_POINT ( 'NONE', ( 23.99362418286894200, -31.29892962639879200, 28.74442404665512300 ) ) ; +#4120 = CARTESIAN_POINT ( 'NONE', ( 17.44237873759179500, -27.96664356504567600, 27.45669629622856800 ) ) ; +#4121 = CARTESIAN_POINT ( 'NONE', ( 7.611706930951577900, -22.16742399275595700, -23.41099016871888200 ) ) ; +#4122 = CARTESIAN_POINT ( 'NONE', ( 10.01820018449476100, -10.00000000000000500, 26.22641545913848300 ) ) ; +#4123 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141211300, -30.55092223628113500, 21.46123905850134900 ) ) ; +#4124 = ORIENTED_EDGE ( 'NONE', *, *, #13229, .F. ) ; +#4125 = CARTESIAN_POINT ( 'NONE', ( 30.66689154755396300, -30.53832687064326000, 27.29917802513160700 ) ) ; +#4126 = CARTESIAN_POINT ( 'NONE', ( 3.460710562555173300, -23.48530562172021900, 12.81408765135917300 ) ) ; +#4127 = CARTESIAN_POINT ( 'NONE', ( 8.360305504213840800, -30.25685449671057400, 26.86309078392324400 ) ) ; +#4128 = CARTESIAN_POINT ( 'NONE', ( 36.28010289101612800, -29.12460241135830700, 22.79475733151976900 ) ) ; +#4129 = EDGE_CURVE ( 'NONE', #13204, #9403, #8504, .T. ) ; +#4130 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999989300, -90.07596123493894400, -4.350951650170763700 ) ) ; +#4131 = CARTESIAN_POINT ( 'NONE', ( 4.412845490752618900, -30.00806151926847700, 24.31604570788089200 ) ) ; +#4132 = CARTESIAN_POINT ( 'NONE', ( 26.37675003751881800, -14.46566888762966800, -25.78741791179943700 ) ) ; +#4133 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#4134 = CARTESIAN_POINT ( 'NONE', ( 2.015497905913271400, -11.89736398432701000, -18.74592009292127400 ) ) ; +#4135 = CARTESIAN_POINT ( 'NONE', ( 29.14507145487164800, -30.83919756863604900, 27.81067391379504600 ) ) ; +#4136 = CARTESIAN_POINT ( 'NONE', ( 36.99846301166737600, -21.55561982700297800, -15.74369502225858000 ) ) ; +#4137 = CARTESIAN_POINT ( 'NONE', ( 10.36537676327744100, -99.99999999999998600, 20.69663776835230000 ) ) ; +#4138 = VERTEX_POINT ( 'NONE', #13846 ) ; +#4139 = CARTESIAN_POINT ( 'NONE', ( 34.95502636511624000, -31.06334294395023200, 23.97805566398614000 ) ) ; +#4140 = CARTESIAN_POINT ( 'NONE', ( 2.500006797552361400, -29.78101003994094100, 21.66506203574987000 ) ) ; +#4141 = CARTESIAN_POINT ( 'NONE', ( 12.29083753135673800, -20.28809933266904900, -23.16333810356277600 ) ) ; +#4142 = CARTESIAN_POINT ( 'NONE', ( 20.77093581436937000, -31.32859326669797900, 28.73919354652433700 ) ) ; +#4143 = CARTESIAN_POINT ( 'NONE', ( 32.53900202452751200, -30.42989876706487700, 26.42749933701087500 ) ) ; +#4144 = CARTESIAN_POINT ( 'NONE', ( 11.33268859973228300, -9.376957338360879700, 25.00000000000000000 ) ) ; +#4145 = CARTESIAN_POINT ( 'NONE', ( 0.2147114256120864200, -10.85884570244828300, 10.71459764075068800 ) ) ; +#4146 = CARTESIAN_POINT ( 'NONE', ( 12.28775713521433500, -12.49999999999977800, -21.80343278059794400 ) ) ; +#4147 = CARTESIAN_POINT ( 'NONE', ( 2.492497069697868600, -95.07596123493897300, -4.496020763364928300 ) ) ; +#4148 = EDGE_CURVE ( 'NONE', #9986, #10086, #8279, .T. ) ; +#4149 = CIRCLE ( 'NONE', #5462, 2.500000000000001300 ) ; +#4150 = CARTESIAN_POINT ( 'NONE', ( 19.21713062019739500, -33.21268289842426200, 28.40697771037979500 ) ) ; +#4151 = CARTESIAN_POINT ( 'NONE', ( 10.39296446369645100, -95.07596123493894400, 8.224698702696992200 ) ) ; +#4152 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999996800, -94.74682992296712300, 18.71443453778741900 ) ) ; +#4153 = CARTESIAN_POINT ( 'NONE', ( 23.66292631866184200, -19.18949841699723900, 23.36467695346051000 ) ) ; +#4154 = EDGE_LOOP ( 'NONE', ( #12081, #253, #3164, #3844 ) ) ; +#4155 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999984000, -89.56735749795936400, 4.661075975869773700 ) ) ; +#4156 = CARTESIAN_POINT ( 'NONE', ( 7.006742854107077500, -13.85888073711618400, -25.68042478927667800 ) ) ; +#4157 = CARTESIAN_POINT ( 'NONE', ( 10.44428593127030800, -30.89977021556868700, 27.66179805044644300 ) ) ; +#4158 = CARTESIAN_POINT ( 'NONE', ( 35.29351901230570100, -30.32289469821581200, 24.57814318236424400 ) ) ; +#4159 = CARTESIAN_POINT ( 'NONE', ( 23.66292631866175000, -19.18949841699696900, 23.36467695346058100 ) ) ; +#4160 = CARTESIAN_POINT ( 'NONE', ( 17.08772038689948800, -20.76439902135937400, -24.39160549124532600 ) ) ; +#4161 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #791, #6237, #9704, #2993 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001281590921689300000 ), + .UNSPECIFIED. ) ; +#4162 = CARTESIAN_POINT ( 'NONE', ( 37.79765555455552600, -18.80937778177775900, 8.005331014629280900 ) ) ; +#4163 = ADVANCED_FACE ( 'NONE', ( #8143 ), #8073, .T. ) ; +#4164 = CARTESIAN_POINT ( 'NONE', ( 2.397828469197160800, -19.58616420641465400, 7.995102828819326200 ) ) ; +#4165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238600 ) ) ; +#4166 = CARTESIAN_POINT ( 'NONE', ( 6.580326044036047200, -29.65414245005105100, 25.71383882553376300 ) ) ; +#4167 = CARTESIAN_POINT ( 'NONE', ( 13.96406807373818500, -15.12358124698184800, -25.90342561169478200 ) ) ; +#4168 = FACE_BOUND ( 'NONE', #4554, .T. ) ; +#4169 = CARTESIAN_POINT ( 'NONE', ( 29.03896618312359100, -11.87754788380861700, 23.99239623775834600 ) ) ; +#4170 = CARTESIAN_POINT ( 'NONE', ( 26.07617956277271200, -31.95460249791747400, 20.70678011832763900 ) ) ; +#4171 = CARTESIAN_POINT ( 'NONE', ( 3.706729393698621000, -28.93077323539743500, 22.29214194749089700 ) ) ; +#4172 = CARTESIAN_POINT ( 'NONE', ( 14.24166765707604100, -99.99999999999995700, 6.197625101945638100 ) ) ; +#4173 = EDGE_LOOP ( 'NONE', ( #4882, #4939, #5620, #5761, #5915, #6106, #6167, #6321, #6372, #6507, #6532, #6621 ) ) ; +#4174 = EDGE_CURVE ( 'NONE', #1781, #11105, #8097, .T. ) ; +#4175 = CARTESIAN_POINT ( 'NONE', ( 11.04428672374307000, -20.39037928915939100, -25.35892644033142300 ) ) ; +#4176 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 3.189999999999994200 ) ) ; +#4177 = CARTESIAN_POINT ( 'NONE', ( 3.463637971137262900, -95.57679032034012300, 12.92966369182027700 ) ) ; +#4178 = CARTESIAN_POINT ( 'NONE', ( 30.66689345283577600, -30.87894993151699600, 27.23911788924561300 ) ) ; +#4179 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -27.09143239524033600, 6.754920151478379400 ) ) ; +#4180 = CARTESIAN_POINT ( 'NONE', ( 8.456576558874902000, -30.99024142739825600, 26.78483240081149600 ) ) ; +#4181 = CARTESIAN_POINT ( 'NONE', ( 36.74154980201645100, -30.30601363436360200, 22.60673088902220900 ) ) ; +#4182 = CARTESIAN_POINT ( 'NONE', ( 5.000000007721785900, -95.07596123493894400, 12.92967538968970900 ) ) ; +#4183 = CARTESIAN_POINT ( 'NONE', ( 4.987531703562027900, -31.05420189117019400, 23.91215559891967900 ) ) ; +#4184 = CARTESIAN_POINT ( 'NONE', ( 37.41397862649090200, -10.00000000000000000, 20.65015935807152300 ) ) ; +#4185 = EDGE_LOOP ( 'NONE', ( #298, #490, #3562, #3655 ) ) ; +#4186 = CARTESIAN_POINT ( 'NONE', ( 22.60189089068263300, -24.23648178535744400, 19.98972415087694900 ) ) ; +#4187 = CARTESIAN_POINT ( 'NONE', ( 34.91630679739723300, -18.58914057447034600, -20.84600191863956900 ) ) ; +#4188 = CARTESIAN_POINT ( 'NONE', ( 25.63654308180752000, -16.36577410602833300, 23.82092710189787300 ) ) ; +#4189 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -12.50000000000001200, 10.14164662228683300 ) ) ; +#4190 = CARTESIAN_POINT ( 'NONE', ( 33.79937280691269300, -31.16214701895970100, 25.12307274662036200 ) ) ; +#4191 = CARTESIAN_POINT ( 'NONE', ( 3.556704035692932500, -28.87961659123335100, 21.82330448832607000 ) ) ; +#4192 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13093, #1927, #14192, #7522 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001872366595206034100 ), + .UNSPECIFIED. ) ; +#4193 = CARTESIAN_POINT ( 'NONE', ( 39.52658467759808800, -11.89366128960763400, 8.005331014629280900 ) ) ; +#4194 = EDGE_LOOP ( 'NONE', ( #1170, #5605, #9236, #8465, #8403, #8738, #14029, #2818 ) ) ; +#4195 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -27.25937709767108100, 29.45670614745888500 ) ) ; +#4196 = EDGE_CURVE ( 'NONE', #5737, #9123, #8129, .T. ) ; +#4197 = CARTESIAN_POINT ( 'NONE', ( 32.48222546386480800, -31.05318520119097800, 26.21936224109265000 ) ) ; +#4198 = CARTESIAN_POINT ( 'NONE', ( 3.881191128347984100, -29.03028729150990000, 22.80229687609130500 ) ) ; +#4199 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999988500, -21.31329507376631200, -12.75230659397449700 ) ) ; +#4200 = CARTESIAN_POINT ( 'NONE', ( 0.01703273109866044000, -10.06813092439458800, 10.88073494874763400 ) ) ; +#4201 = CARTESIAN_POINT ( 'NONE', ( 16.31269637224841800, -12.50000000000002300, -14.24052338899645400 ) ) ; +#4202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4203 = ORIENTED_EDGE ( 'NONE', *, *, #9061, .F. ) ; +#4204 = CARTESIAN_POINT ( 'NONE', ( 22.40557478599585300, -19.87093624336284800, 23.25948761544214000 ) ) ; +#4205 = CARTESIAN_POINT ( 'NONE', ( 5.522939465952742200, -89.55013418175582300, 4.966258557459592100 ) ) ; +#4206 = CARTESIAN_POINT ( 'NONE', ( 11.39828428010370200, -93.16226521819804400, 22.17399092077997100 ) ) ; +#4207 = ORIENTED_EDGE ( 'NONE', *, *, #13081, .F. ) ; +#4208 = CARTESIAN_POINT ( 'NONE', ( 11.05792683903200300, -8.313603519814966700, -24.70264280037159200 ) ) ; +#4209 = CARTESIAN_POINT ( 'NONE', ( 10.44477882551624500, -30.77246976535701300, 27.68894288165759900 ) ) ; +#4210 = CARTESIAN_POINT ( 'NONE', ( 34.88770135116171600, -31.07266603059581200, 24.05286625447923400 ) ) ; +#4211 = CARTESIAN_POINT ( 'NONE', ( 2.677647449690322600, -29.20455397952039100, 16.68368505643536200 ) ) ; +#4212 = CARTESIAN_POINT ( 'NONE', ( 9.246204044827974800, -21.19653277590862600, -21.31337318204627000 ) ) ; +#4213 = EDGE_CURVE ( 'NONE', #13310, #6960, #8086, .T. ) ; +#4214 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -14.31000000000000400 ) ) ; +#4215 = ORIENTED_EDGE ( 'NONE', *, *, #3726, .F. ) ; +#4216 = CARTESIAN_POINT ( 'NONE', ( 2.500330546369568600, -20.39529660380039300, 8.110412930667807900 ) ) ; +#4217 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -89.20772034660431900, 11.03354182248334700 ) ) ; +#4218 = CARTESIAN_POINT ( 'NONE', ( 6.623086824497683300, -30.70907493933343000, 25.85333329462849500 ) ) ; +#4219 = CARTESIAN_POINT ( 'NONE', ( 12.76390800574514700, -18.92924534985691700, -26.57446687254517300 ) ) ; +#4220 = CARTESIAN_POINT ( 'NONE', ( 28.29245940135470900, -38.82060746691728800, 18.73907739207586700 ) ) ; +#4221 = CARTESIAN_POINT ( 'NONE', ( 4.042563266405577100, -29.01184682111141200, 22.95163722246686400 ) ) ; +#4222 = CARTESIAN_POINT ( 'NONE', ( 6.266058495799803100, -99.99999999999995700, -0.5025220806101488000 ) ) ; +#4223 = ORIENTED_EDGE ( 'NONE', *, *, #8977, .T. ) ; +#4224 = CARTESIAN_POINT ( 'NONE', ( 13.64910064711828900, -18.44178075269765000, -26.81961833657277700 ) ) ; +#4225 = CARTESIAN_POINT ( 'NONE', ( 37.98450209408630900, -11.89736398432789200, -18.74592009292171500 ) ) ; +#4226 = CARTESIAN_POINT ( 'NONE', ( 30.36246479983231000, -30.49305759588724000, 27.42144062580495100 ) ) ; +#4227 = CARTESIAN_POINT ( 'NONE', ( 8.439245903353516100, -30.49084202215549800, 26.91009795891746100 ) ) ; +#4228 = CARTESIAN_POINT ( 'NONE', ( 35.82737612673346200, -29.04443696325519800, 23.17242094261285200 ) ) ; +#4229 = ORIENTED_EDGE ( 'NONE', *, *, #4077, .T. ) ; +#4230 = CARTESIAN_POINT ( 'NONE', ( 24.50020775733377900, -12.50000000000005000, -13.52748070170443400 ) ) ; +#4231 = CARTESIAN_POINT ( 'NONE', ( 4.557148544671337100, -30.30100931454289500, 24.44496140295885700 ) ) ; +#4232 = CARTESIAN_POINT ( 'NONE', ( 34.91127571885411400, -95.07595490844741400, 13.36838966536766700 ) ) ; +#4233 = EDGE_LOOP ( 'NONE', ( #12723, #9459, #6718, #10154, #6667, #6493, #8625 ) ) ; +#4234 = FACE_OUTER_BOUND ( 'NONE', #4233, .T. ) ; +#4235 = CARTESIAN_POINT ( 'NONE', ( 32.24472689554228600, -20.32814828140188000, -23.21322776311264800 ) ) ; +#4236 = CARTESIAN_POINT ( 'NONE', ( 36.53339678999351000, -28.90350506946044000, 21.75172308334958500 ) ) ; +#4237 = ADVANCED_FACE ( 'NONE', ( #7927 ), #12846, .F. ) ; +#4238 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -39.52045731841470700, 19.79474689191102900 ) ) ; +#4239 = CARTESIAN_POINT ( 'NONE', ( 32.28625685915938000, -31.13890492373462100, 26.27674321464465000 ) ) ; +#4240 = EDGE_CURVE ( 'NONE', #4395, #9194, #13517, .T. ) ; +#4241 = CARTESIAN_POINT ( 'NONE', ( 2.732421352975753500, -30.13631103718646300, 21.66565634470172700 ) ) ; +#4242 = CARTESIAN_POINT ( 'NONE', ( 12.61537646793351900, -11.34173030189412900, 24.76341674694136700 ) ) ; +#4243 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122093500, -0.1736481776669230600 ) ) ; +#4244 = ORIENTED_EDGE ( 'NONE', *, *, #7558, .T. ) ; +#4245 = CARTESIAN_POINT ( 'NONE', ( 32.12708740001475900, -30.22541816083224100, 26.62455044167130700 ) ) ; +#4246 = CARTESIAN_POINT ( 'NONE', ( 6.129663226214830700, -22.04305437433990600, -21.83903651400637400 ) ) ; +#4247 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -39.52045731841470700, 19.79474689191102500 ) ) ; +#4248 = CARTESIAN_POINT ( 'NONE', ( 10.64972165270583200, -21.04869002115473400, -22.36616152016988200 ) ) ; +#4249 = LINE ( 'NONE', #7754, #8971 ) ; +#4250 = ORIENTED_EDGE ( 'NONE', *, *, #7146, .F. ) ; +#4251 = AXIS2_PLACEMENT_3D ( 'NONE', #10478, #3764, #11606 ) ; +#4252 = FACE_OUTER_BOUND ( 'NONE', #5754, .T. ) ; +#4253 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999998900, -19.87270537885227400, 23.25917566912282200 ) ) ; +#4254 = CARTESIAN_POINT ( 'NONE', ( 7.526661234890759100, -97.46860963221745100, 20.19613507091680700 ) ) ; +#4255 = DIRECTION ( 'NONE', ( 1.110223024625157200E-014, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4256 = CARTESIAN_POINT ( 'NONE', ( 34.67153512205145900, -94.93423344913993800, 14.62504416783265000 ) ) ; +#4257 = CARTESIAN_POINT ( 'NONE', ( 32.45591641591446600, -10.30579574384703700, 23.50899506774984700 ) ) ; +#4258 = CARTESIAN_POINT ( 'NONE', ( 10.44427341108869100, -30.66008115546122100, 27.70380330335399700 ) ) ; +#4259 = CARTESIAN_POINT ( 'NONE', ( 34.94838913684895900, -30.11941567467783900, 24.87773202638143000 ) ) ; +#4260 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -31.29513776008465000, 28.74509265499353500 ) ) ; +#4261 = EDGE_CURVE ( 'NONE', #13139, #8982, #10419, .T. ) ; +#4262 = CARTESIAN_POINT ( 'NONE', ( 5.100487043263680000, -22.27327907635807900, -13.59778538150088800 ) ) ; +#4263 = LINE ( 'NONE', #1049, #4448 ) ; +#4264 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -40.82281865091663800, 27.18080503950259800 ) ) ; +#4265 = VERTEX_POINT ( 'NONE', #5051 ) ; +#4266 = CARTESIAN_POINT ( 'NONE', ( 2.511803266336738000, -21.17995464145290500, 8.414296883574664300 ) ) ; +#4267 = CARTESIAN_POINT ( 'NONE', ( 12.28046566660989400, -94.74249072621034900, 18.13938558346794100 ) ) ; +#4268 = FACE_OUTER_BOUND ( 'NONE', #12745, .T. ) ; +#4269 = CARTESIAN_POINT ( 'NONE', ( 6.696716865395935700, -29.87974522697184900, 25.88912309757403600 ) ) ; +#4270 = CARTESIAN_POINT ( 'NONE', ( 13.45658674413825800, -21.14097596479532700, -26.49539516101813800 ) ) ; +#4271 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8515, #732, #2933, #10776, #4043, #11884, #5158, #12997, #6285, #14095, #7426, #784 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005999816753270497900, 0.001199963350654099600, 0.002399926701308194400, 0.003599890051962289200, 0.004799853402616384400 ), + .UNSPECIFIED. ) ; +#4272 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -18.70000000000000600 ) ) ; +#4273 = CARTESIAN_POINT ( 'NONE', ( 34.59880736946576700, -31.56038146495003400, 24.13144155331723100 ) ) ; +#4274 = CARTESIAN_POINT ( 'NONE', ( 4.794438220742983400, -29.18875913844701800, 24.00483409532360900 ) ) ; +#4275 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#4276 = VERTEX_POINT ( 'NONE', #5104 ) ; +#4277 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4278 = CARTESIAN_POINT ( 'NONE', ( 30.36946441124596400, -30.77197293882990100, 27.39085023680542400 ) ) ; +#4279 = CARTESIAN_POINT ( 'NONE', ( 26.54932301350857000, -20.28809933267076800, -23.63486429515916100 ) ) ; +#4280 = CARTESIAN_POINT ( 'NONE', ( 8.660622579597458100, -31.07054472792020100, 26.84740945035685700 ) ) ; +#4281 = CARTESIAN_POINT ( 'NONE', ( 36.55237819054034500, -30.03942649157647800, 23.15397504515113200 ) ) ; +#4282 = VECTOR ( 'NONE', #6463, 1000.000000000000000 ) ; +#4283 = EDGE_LOOP ( 'NONE', ( #9362, #3869, #6206, #9272 ) ) ; +#4284 = EDGE_CURVE ( 'NONE', #6075, #4686, #7904, .T. ) ; +#4285 = CARTESIAN_POINT ( 'NONE', ( 4.969743466768777700, -29.26071203533264900, 24.24506978431099600 ) ) ; +#4286 = ORIENTED_EDGE ( 'NONE', *, *, #3436, .T. ) ; +#4287 = CARTESIAN_POINT ( 'NONE', ( 29.07602894661850000, -22.34171533858774000, -25.64373579114155500 ) ) ; +#4288 = CARTESIAN_POINT ( 'NONE', ( 37.43340811123428600, -29.93161321723734900, 21.57043883871752900 ) ) ; +#4289 = CARTESIAN_POINT ( 'NONE', ( 17.61130098688547100, -33.86963066632297600, 20.79114009398124800 ) ) ; +#4290 = CARTESIAN_POINT ( 'NONE', ( 30.44055872656215200, -30.98945208066060900, 27.29528872605708400 ) ) ; +#4291 = CARTESIAN_POINT ( 'NONE', ( 3.298022936026432400, -28.99961154131922200, 21.86512873690676200 ) ) ; +#4292 = CIRCLE ( 'NONE', #6469, 5.000000000000000900 ) ; +#4293 = ORIENTED_EDGE ( 'NONE', *, *, #8696, .T. ) ; +#4294 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -97.08344081517951500, 22.14483981135568100 ) ) ; +#4295 = CARTESIAN_POINT ( 'NONE', ( 32.14270190857642700, -30.81363904347550400, 26.55041373081306900 ) ) ; +#4296 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4238, #10925, #14275 ), + ( #7614, #963, #8751 ), + ( #2060, #9879, #3169 ), + ( #11014, #4289, #12115 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.07007053679313965400, 0.07508824613630552000 ), + ( 0.0000000000000000000, 0.8217186964344620500 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7593241660421161700, 0.9141839971705310000), + ( 1.000000000000000000, 0.7593241660421161700, 0.9141839971705310000), + ( 1.000000000000000000, 0.7593241660421161700, 0.9141839971705310000), + ( 1.000000000000000000, 0.7593241660421161700, 0.9141839971705310000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4297 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4298 = CARTESIAN_POINT ( 'NONE', ( 11.18019970773951000, -12.50000000000004800, -21.22813284410693100 ) ) ; +#4299 = ORIENTED_EDGE ( 'NONE', *, *, #2376, .F. ) ; +#4300 = EDGE_CURVE ( 'NONE', #12242, #959, #267, .T. ) ; +#4301 = CARTESIAN_POINT ( 'NONE', ( 6.385216200936786100, -94.72593719297397300, 15.95984444834823000 ) ) ; +#4302 = CARTESIAN_POINT ( 'NONE', ( 2.586021373522274600, -10.00000000000000500, 20.65015935808747500 ) ) ; +#4303 = CARTESIAN_POINT ( 'NONE', ( 10.75252080021704700, -30.81188074269953600, 27.78305207448853400 ) ) ; +#4304 = CARTESIAN_POINT ( 'NONE', ( 34.65159516917564300, -31.05422132097303100, 24.39974802420209000 ) ) ; +#4305 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000009600, -12.50000000000000900, 22.05918254822885100 ) ) ; +#4306 = CARTESIAN_POINT ( 'NONE', ( 33.81847316726155100, -31.00516392861775100, 25.28993744942971500 ) ) ; +#4307 = ADVANCED_FACE ( 'NONE', ( #7930 ), #3680, .T. ) ; +#4308 = EDGE_LOOP ( 'NONE', ( #4549, #10316, #848, #2227, #6874 ) ) ; +#4309 = CARTESIAN_POINT ( 'NONE', ( 2.274459523679048800, -18.82848402016379900, 9.372291047865942900 ) ) ; +#4310 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4311 = CARTESIAN_POINT ( 'NONE', ( 6.784868739759837700, -31.01594230347379300, 25.75346380803466700 ) ) ; +#4312 = AXIS2_PLACEMENT_3D ( 'NONE', #12565, #5859, #13670 ) ; +#4313 = CARTESIAN_POINT ( 'NONE', ( 32.84253577181069500, -31.32681011594247500, 17.15043672228871300 ) ) ; +#4314 = CARTESIAN_POINT ( 'NONE', ( 6.654176795458409900, -29.67169411486768400, 25.76818057603509600 ) ) ; +#4315 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#4316 = CARTESIAN_POINT ( 'NONE', ( 22.40395493491602300, -27.96340410149403200, 27.45756719153385800 ) ) ; +#4317 = CARTESIAN_POINT ( 'NONE', ( 37.49978311735355200, -21.22584144076372300, 7.871088902398296800 ) ) ; +#4318 = CARTESIAN_POINT ( 'NONE', ( 30.16168449863849700, -30.52170366836625700, 27.49703087764732200 ) ) ; +#4319 = CARTESIAN_POINT ( 'NONE', ( 30.78778345452908400, -100.0000000000000300, -35.17784268884943800 ) ) ; +#4320 = CARTESIAN_POINT ( 'NONE', ( 8.632533437390762300, -30.64046776248883200, 26.98521762367657900 ) ) ; +#4321 = CARTESIAN_POINT ( 'NONE', ( 35.82592052392755000, -30.87214339976795300, 22.85024301128484600 ) ) ; +#4322 = EDGE_CURVE ( 'NONE', #12696, #5055, #7757, .T. ) ; +#4323 = CARTESIAN_POINT ( 'NONE', ( 4.795278073395966300, -30.61548571900676300, 24.44204759711789900 ) ) ; +#4324 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12756, #4913, #13858, #7174, #557, #8331, #1650, #9445, #2745, #10584, #3861, #11700, #4965, #12805, #6093, #13901, #7225, #598, #8377, #1697, #9499, #2792, #10633, #3912 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -2.461485983555503600E-005, 0.002843471905570822500, 0.005711558670977200300, 0.008579645436383578900, 0.01001368881908676500, 0.01144773220178995100, 0.01431581896719633300, 0.01574986234989952200, 0.01718390573260271000, 0.02005199249800908000, 0.02148603588071226800, 0.02292007926341545200 ), + .UNSPECIFIED. ) ; +#4325 = CARTESIAN_POINT ( 'NONE', ( 30.37166470580861600, -12.44449656800525400, -25.03044396726535600 ) ) ; +#4326 = CARTESIAN_POINT ( 'NONE', ( 25.85783215936167400, -18.43869633472486700, -26.94152482499925600 ) ) ; +#4327 = CARTESIAN_POINT ( 'NONE', ( 30.66432293037948000, -32.49544864990944900, 24.95848365696237200 ) ) ; +#4328 = AXIS2_PLACEMENT_3D ( 'NONE', #4367, #1092, #8883 ) ; +#4329 = CARTESIAN_POINT ( 'NONE', ( 37.86017404077667700, -11.92115515658141200, -18.99951088126286800 ) ) ; +#4330 = CARTESIAN_POINT ( 'NONE', ( 3.328412733988447100, -30.49261269073831600, 21.71808680286110500 ) ) ; +#4331 = VECTOR ( 'NONE', #5948, 1000.000000000000000 ) ; +#4332 = CARTESIAN_POINT ( 'NONE', ( 23.47411650217507900, -19.00051484900046700, 23.41296639185410600 ) ) ; +#4333 = CARTESIAN_POINT ( 'NONE', ( 31.91068053994671100, -30.08388958657833700, 26.70551952441147500 ) ) ; +#4334 = ORIENTED_EDGE ( 'NONE', *, *, #5839, .T. ) ; +#4335 = CARTESIAN_POINT ( 'NONE', ( 29.97928539560738800, -11.68433966184651000, -25.06128727820667400 ) ) ; +#4336 = CARTESIAN_POINT ( 'NONE', ( 5.001261064024004300, -22.52828254370398400, 7.769124470573966200 ) ) ; +#4337 = CARTESIAN_POINT ( 'NONE', ( 15.86824437507386800, -12.49999999999997900, -13.92561331888295400 ) ) ; +#4338 = DIRECTION ( 'NONE', ( -1.207632162170981400E-015, 0.01862984900630723300, -0.9998264493030790700 ) ) ; +#4339 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4340 = EDGE_CURVE ( 'NONE', #8776, #6638, #7780, .T. ) ; +#4341 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12748, #10522, #13851, #7169, #552, #8325, #1642, #9437, #2740, #10576, #3852, #11694, #4957, #12796, #6084, #13895, #7216, #591, #8370, #1689, #9490, #2784, #10625, #3904, #11741 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0003358571417340235600, 0.0006717142834680471200, 0.001343428566936094000, 0.002686857133872183300, 0.005373714267744357900, 0.008060571401616532400, 0.01074742853548870700, 0.01343428566936088000, 0.01477771423629696700, 0.01612114280323304800, 0.01880799993710520100, 0.02149485707097735200 ), + .UNSPECIFIED. ) ; +#4342 = FACE_OUTER_BOUND ( 'NONE', #12652, .T. ) ; +#4343 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4344 = CARTESIAN_POINT ( 'NONE', ( 10.75144271466832500, -30.72988592254770200, 27.79573700237444500 ) ) ; +#4345 = CARTESIAN_POINT ( 'NONE', ( 34.65344635859200700, -29.77238955947024500, 24.95698599766179300 ) ) ; +#4346 = ORIENTED_EDGE ( 'NONE', *, *, #4475, .F. ) ; +#4347 = AXIS2_PLACEMENT_3D ( 'NONE', #5665, #13484, #6791 ) ; +#4348 = CARTESIAN_POINT ( 'NONE', ( 22.83148325166343200, -12.50000000000001200, 10.11936020223069800 ) ) ; +#4349 = CARTESIAN_POINT ( 'NONE', ( 33.73351247303715900, -29.77357911585221100, 25.57556586637903400 ) ) ; +#4350 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4351 = CARTESIAN_POINT ( 'NONE', ( 37.79765555455552600, -18.80937778177775900, 8.005331014629280900 ) ) ; +#4352 = CARTESIAN_POINT ( 'NONE', ( 2.669966918534858900, -19.55846113893998300, 10.85099912628711000 ) ) ; +#4353 = CARTESIAN_POINT ( 'NONE', ( 6.714429460916060900, -30.23979857997466100, 25.99734233415002300 ) ) ; +#4354 = CARTESIAN_POINT ( 'NONE', ( 2.201425001453305900, -18.80570000581308300, -11.53187062879840900 ) ) ; +#4355 = CARTESIAN_POINT ( 'NONE', ( 35.52381492962391700, -34.50405460810049600, 13.02045795559563100 ) ) ; +#4356 = CARTESIAN_POINT ( 'NONE', ( 8.842077879649268700, -30.27088296977123600, 27.08211600766123400 ) ) ; +#4357 = EDGE_CURVE ( 'NONE', #7738, #12057, #7750, .T. ) ; +#4358 = CARTESIAN_POINT ( 'NONE', ( 39.62793159458848900, -11.21998405832443300, 10.67166555138280300 ) ) ; +#4359 = CARTESIAN_POINT ( 'NONE', ( 37.50060054838215300, -20.40376412943441400, 7.926708812638601400 ) ) ; +#4360 = ORIENTED_EDGE ( 'NONE', *, *, #3948, .T. ) ; +#4361 = CARTESIAN_POINT ( 'NONE', ( 30.16697648485253000, -30.72706212258315300, 27.47726049353014200 ) ) ; +#4362 = CARTESIAN_POINT ( 'NONE', ( 34.07776211278485300, -20.28809933267076800, -16.43467247798978900 ) ) ; +#4363 = CARTESIAN_POINT ( 'NONE', ( 8.660697362545832300, -30.22370223102615900, 26.99657014346863100 ) ) ; +#4364 = CARTESIAN_POINT ( 'NONE', ( 36.30406060578811600, -29.77855519731948100, 23.44071448256296000 ) ) ; +#4365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #18, #6611, #8891, #2196, #10010, #3298, #11149, #4422, #12253, #5523, #13358, #6658, #64, #7803, #1154, #8938, #2237 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 2, 4 ), + ( -2.620141316587659200E-005, 0.0003600658901648215400, 0.0007463331934955195900, 0.001518867800156917000, 0.003063937013479707000, 0.006154075440125285300, 0.007699144653448070600, 0.009244213866770855900, 0.01233435229341641900 ), + .UNSPECIFIED. ) ; +#4366 = VERTEX_POINT ( 'NONE', #9659 ) ; +#4367 = CARTESIAN_POINT ( 'NONE', ( 1.387778780781445700E-014, -10.00000000000000000, 25.00000000000000000 ) ) ; +#4368 = CARTESIAN_POINT ( 'NONE', ( 4.906427983668096200, -29.59957250589500400, 24.51366633105984500 ) ) ; +#4369 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 10.00000000000000200, 20.00000000000000400 ) ) ; +#4370 = ADVANCED_FACE ( 'NONE', ( #7768 ), #10084, .F. ) ; +#4371 = CARTESIAN_POINT ( 'NONE', ( 8.619956863719954400, -10.50646720886443400, 23.81348795603598100 ) ) ; +#4372 = ORIENTED_EDGE ( 'NONE', *, *, #9102, .F. ) ; +#4373 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4374 = CARTESIAN_POINT ( 'NONE', ( 2.761851812278164300, -29.34530319598172800, 21.91503499875971900 ) ) ; +#4375 = CARTESIAN_POINT ( 'NONE', ( 26.70720308668627000, -11.68860824032027800, 24.70225280738490200 ) ) ; +#4376 = CARTESIAN_POINT ( 'NONE', ( 31.95754380070633300, -30.65291147596247300, 26.69787751817078100 ) ) ; +#4377 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, -20.00000000000000000 ) ) ; +#4378 = CARTESIAN_POINT ( 'NONE', ( 28.94012256970296400, -30.78890648650554200, 27.88330109116672500 ) ) ; +#4379 = VERTEX_POINT ( 'NONE', #2264 ) ; +#4380 = CARTESIAN_POINT ( 'NONE', ( 35.28037699569615200, -9.902985330893530500, 20.24219471086331300 ) ) ; +#4381 = CARTESIAN_POINT ( 'NONE', ( 8.074240865852683400, -23.64431094130475900, 15.76580856041550200 ) ) ; +#4382 = CARTESIAN_POINT ( 'NONE', ( 8.615158179024787100, -21.28034721794783500, -20.71345869272350300 ) ) ; +#4383 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995100, -27.07571732632045400, 6.665795566818498900 ) ) ; +#4384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4385 = VERTEX_POINT ( 'NONE', #10091 ) ; +#4386 = CARTESIAN_POINT ( 'NONE', ( 37.32272558746654300, -29.20305851973171600, 16.67736148301697000 ) ) ; +#4387 = CARTESIAN_POINT ( 'NONE', ( 34.65347444659454400, -30.79760317132982900, 24.77620652519044600 ) ) ; +#4388 = ORIENTED_EDGE ( 'NONE', *, *, #9225, .T. ) ; +#4389 = CARTESIAN_POINT ( 'NONE', ( 25.39723299449884300, -24.18994787707270400, 19.65810464177428300 ) ) ; +#4390 = CARTESIAN_POINT ( 'NONE', ( 33.82658023070339900, -30.68034231923138600, 25.54443887857358700 ) ) ; +#4391 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4392 = CARTESIAN_POINT ( 'NONE', ( 3.117450821269669900, -20.20117249308318800, 12.29610559422402400 ) ) ; +#4393 = CARTESIAN_POINT ( 'NONE', ( 7.008701928779424300, -31.16442834443874000, 25.78243120011072500 ) ) ; +#4394 = CARTESIAN_POINT ( 'NONE', ( 7.299497077617721000E-014, -10.00000000000003200, -18.40410801890993000 ) ) ; +#4395 = VERTEX_POINT ( 'NONE', #11219 ) ; +#4396 = CARTESIAN_POINT ( 'NONE', ( 37.44503467659535500, -28.44941163723128200, 13.30858559229789900 ) ) ; +#4397 = EDGE_CURVE ( 'NONE', #14193, #9514, #2026, .T. ) ; +#4398 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12085, #8720, #5358 ), + ( #13199, #6489, #14289 ), + ( #7627, #976, #8766 ), + ( #2073, #6873, #4628 ), + ( #7148, #532, #8302 ), + ( #1620, #9418, #2720 ), + ( #10547, #3826, #11670 ), + ( #4930, #12773, #6064 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.007664391712223066500, 0.009882102740948653400, 0.01209981376967423800, 0.01653523582712540900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8085845259241133400, 1.000000000000000000), + ( 1.000000000000000000, 0.8417769234790224400, 1.000000000000000000), + ( 1.000000000000000000, 0.8702560228624115500, 1.000000000000000000), + ( 1.000000000000000000, 0.9187244656061146500, 1.000000000000000000), + ( 1.000000000000000000, 0.9383017383441919500, 1.000000000000000000), + ( 1.000000000000000000, 0.9849026854947137100, 1.000000000000000000), + ( 1.000000000000000000, 0.9998476928294863800, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4399 = CARTESIAN_POINT ( 'NONE', ( 12.58359595370159000, -11.87724389807648300, 24.55522993379390700 ) ) ; +#4400 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -8.044359732407334800, 16.42461627197686600 ) ) ; +#4401 = CARTESIAN_POINT ( 'NONE', ( 37.60226737368532900, -19.58644278314722300, 7.969317733148363600 ) ) ; +#4402 = ORIENTED_EDGE ( 'NONE', *, *, #7398, .F. ) ; +#4403 = CARTESIAN_POINT ( 'NONE', ( 30.16196134338893500, -30.95628310790440500, 27.42123880437099000 ) ) ; +#4404 = LINE ( 'NONE', #13224, #4415 ) ; +#4405 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -100.0000000000000300, -25.63802908547508300 ) ) ; +#4406 = CARTESIAN_POINT ( 'NONE', ( 8.732485959197042300, -30.74848671870656600, 27.00947099161833600 ) ) ; +#4407 = CARTESIAN_POINT ( 'NONE', ( 35.84525247151165000, -30.80888493164317800, 23.09696888988981600 ) ) ; +#4408 = AXIS2_PLACEMENT_3D ( 'NONE', #7672, #1027, #8813 ) ; +#4409 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4410 = ORIENTED_EDGE ( 'NONE', *, *, #4921, .T. ) ; +#4411 = CARTESIAN_POINT ( 'NONE', ( 26.91419732678186300, -20.06674048095899100, 22.55852270763023200 ) ) ; +#4412 = CARTESIAN_POINT ( 'NONE', ( 5.301833327210786700, -30.98823762787105500, 24.46099857806752800 ) ) ; +#4413 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4414 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1576, #9373, #2671 ), + ( #10498, #3783, #11625 ), + ( #4886, #12727, #6025 ), + ( #13833, #7150, #534 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -3.469446951953614200E-018, 0.0001872366595206035400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882847300, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643991125684200, 1.000000000000000000), + ( 1.000000000000000000, 0.7941518730292345100, 1.000000000000000000), + ( 1.000000000000000000, 0.7941268098083124100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4415 = VECTOR ( 'NONE', #9875, 1000.000000000000000 ) ; +#4416 = ORIENTED_EDGE ( 'NONE', *, *, #9334, .T. ) ; +#4417 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#4418 = EDGE_CURVE ( 'NONE', #11259, #1781, #7586, .T. ) ; +#4419 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, -19.74219049453691000 ) ) ; +#4420 = CARTESIAN_POINT ( 'NONE', ( 3.617910607316893000, -30.62029927920955800, 21.75503866725738400 ) ) ; +#4421 = CYLINDRICAL_SURFACE ( 'NONE', #6921, 2.500000000000002200 ) ; +#4422 = CARTESIAN_POINT ( 'NONE', ( 24.94434882213045800, -21.66664999955181200, -26.89236318001269800 ) ) ; +#4423 = CARTESIAN_POINT ( 'NONE', ( 31.90832046342605800, -31.11598461973696300, 26.51887143571938700 ) ) ; +#4424 = CARTESIAN_POINT ( 'NONE', ( 28.93941831067983400, -30.82090367208322600, 27.87802751888125700 ) ) ; +#4425 = CARTESIAN_POINT ( 'NONE', ( 36.45275069155121600, -30.54958874895015700, 21.46147354584656200 ) ) ; +#4426 = ORIENTED_EDGE ( 'NONE', *, *, #5880, .F. ) ; +#4427 = CARTESIAN_POINT ( 'NONE', ( 27.09725799106939800, -10.00000000000000000, 25.19460466258191600 ) ) ; +#4428 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -12.50000000000000400, -14.54982113999827900 ) ) ; +#4429 = CARTESIAN_POINT ( 'NONE', ( 8.243780693820733400, -12.50000000000000900, -18.86313076811735100 ) ) ; +#4430 = CARTESIAN_POINT ( 'NONE', ( 6.561166751459378900E-016, -10.00000000000000000, -19.91444001015384700 ) ) ; +#4431 = CARTESIAN_POINT ( 'NONE', ( 3.779854951721055600, -30.58225766439127500, 22.99059931903479600 ) ) ; +#4432 = CYLINDRICAL_SURFACE ( 'NONE', #12232, 1.200000000000006600 ) ; +#4433 = EDGE_LOOP ( 'NONE', ( #6283, #11234, #14010, #11386 ) ) ; +#4434 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524033600, 6.754920151478382100 ) ) ; +#4435 = CARTESIAN_POINT ( 'NONE', ( 0.1503663083569228600, -10.44895108020823600, -12.74387350320126300 ) ) ; +#4436 = CARTESIAN_POINT ( 'NONE', ( 34.18060937498186300, -29.51852073225573000, 25.12843120989525800 ) ) ; +#4437 = VERTEX_POINT ( 'NONE', #13471 ) ; +#4438 = CARTESIAN_POINT ( 'NONE', ( 27.60751036316333900, -12.49999999999974200, 20.97250102267172200 ) ) ; +#4439 = EDGE_CURVE ( 'NONE', #10735, #6593, #6472, .T. ) ; +#4440 = CARTESIAN_POINT ( 'NONE', ( 33.50278707634596700, -29.63144372820323000, 25.64914604316280800 ) ) ; +#4441 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#4442 = CARTESIAN_POINT ( 'NONE', ( 3.648020148727087400, -20.74277761233290800, 13.71837137901795100 ) ) ; +#4443 = CARTESIAN_POINT ( 'NONE', ( 6.873482902912440000, -95.07596123493894400, 14.13131769577487300 ) ) ; +#4444 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524033600, 6.754920151478382100 ) ) ; +#4445 = CARTESIAN_POINT ( 'NONE', ( 6.882792908669338200, -30.47217263614702200, 26.10054915054178100 ) ) ; +#4446 = CARTESIAN_POINT ( 'NONE', ( 0.05817661075678366000, -10.23270733205299600, -12.84327995606000000 ) ) ; +#4447 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2430, #12498, #5782, #13592 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004625612329668380600 ), + .UNSPECIFIED. ) ; +#4448 = VECTOR ( 'NONE', #7699, 1000.000000000000000 ) ; +#4449 = ORIENTED_EDGE ( 'NONE', *, *, #9787, .T. ) ; +#4450 = CARTESIAN_POINT ( 'NONE', ( 37.50000000001627100, -27.69553506614674600, 7.787118572931651000 ) ) ; +#4451 = CARTESIAN_POINT ( 'NONE', ( 12.11734336828026500, -10.04852706080339100, 24.99144336988587900 ) ) ; +#4452 = CARTESIAN_POINT ( 'NONE', ( 28.08116180380680800, -100.0000000000000100, -37.06069147054357400 ) ) ; +#4453 = CARTESIAN_POINT ( 'NONE', ( 37.80122841042604900, -18.79519293546798100, 8.003170130819826900 ) ) ; +#4454 = EDGE_LOOP ( 'NONE', ( #11572, #1142, #269, #1493, #6619, #5835, #14351 ) ) ; +#4455 = CARTESIAN_POINT ( 'NONE', ( 29.75968113126941000, -30.70858613260109500, 27.62794287311956200 ) ) ; +#4456 = CARTESIAN_POINT ( 'NONE', ( 0.02838215973449100000, 9.894538436513098400, 1.388060368969690900 ) ) ; +#4457 = CARTESIAN_POINT ( 'NONE', ( 8.749930217224557400, -30.31648556860492500, 27.04680920648557000 ) ) ; +#4458 = CARTESIAN_POINT ( 'NONE', ( 35.78820479158302000, -29.41398985318902200, 23.71878247653222600 ) ) ; +#4459 = CARTESIAN_POINT ( 'NONE', ( 3.890169632259925100, -7.499999999999921800, 24.90765373160929400 ) ) ; +#4460 = FACE_OUTER_BOUND ( 'NONE', #482, .T. ) ; +#4461 = EDGE_CURVE ( 'NONE', #5375, #9986, #7406, .T. ) ; +#4462 = CARTESIAN_POINT ( 'NONE', ( 35.70514000828342900, -22.44744359963434000, 14.81030628274378100 ) ) ; +#4463 = CARTESIAN_POINT ( 'NONE', ( 5.059663956488193100, -30.07936625111695900, 24.87607195679343200 ) ) ; +#4464 = CARTESIAN_POINT ( 'NONE', ( 23.47411650217507900, -19.00051484900046700, 23.41296639185410600 ) ) ; +#4465 = CARTESIAN_POINT ( 'NONE', ( 27.99894228708126000, -95.07596123493894400, 16.22268093446660200 ) ) ; +#4466 = CARTESIAN_POINT ( 'NONE', ( 3.550532966968379200, -30.55079519729964900, 21.46087037243996700 ) ) ; +#4467 = ORIENTED_EDGE ( 'NONE', *, *, #9787, .F. ) ; +#4468 = CARTESIAN_POINT ( 'NONE', ( 2.556534725339394900, -29.70133580630307100, 21.90578711550669400 ) ) ; +#4469 = CARTESIAN_POINT ( 'NONE', ( 31.66157744172572200, -30.55516224717576500, 26.85741666126075300 ) ) ; +#4470 = CARTESIAN_POINT ( 'NONE', ( 28.83717133335124300, -30.80700066255028700, 27.91123031148819700 ) ) ; +#4471 = CARTESIAN_POINT ( 'NONE', ( 37.27747743278607100, -29.32121435788484100, 21.74644572947111200 ) ) ; +#4472 = CARTESIAN_POINT ( 'NONE', ( 15.32591551304742000, -12.50000000000001200, -13.24783744896569200 ) ) ; +#4473 = PLANE ( 'NONE', #11947 ) ; +#4474 = CARTESIAN_POINT ( 'NONE', ( 3.779802970911574800, -29.36371099505416600, 23.20326089871328500 ) ) ; +#4475 = EDGE_CURVE ( 'NONE', #13375, #1799, #7424, .T. ) ; +#4476 = VERTEX_POINT ( 'NONE', #4120 ) ; +#4477 = CARTESIAN_POINT ( 'NONE', ( 10.62038770884806400, -9.904003851098927700, 24.41710642747845100 ) ) ; +#4478 = CARTESIAN_POINT ( 'NONE', ( 32.40352598779944800, -21.44225788197084600, -19.55729187245213300 ) ) ; +#4479 = CARTESIAN_POINT ( 'NONE', ( 13.71137956450033200, -39.19831806811024000, 19.36808549404923600 ) ) ; +#4480 = CARTESIAN_POINT ( 'NONE', ( 34.39662208346856400, -30.50266986629730700, 25.21630007134492500 ) ) ; +#4481 = CARTESIAN_POINT ( 'NONE', ( 23.50740001736249200, -12.49999999999998600, 9.923450100913310500 ) ) ; +#4482 = CARTESIAN_POINT ( 'NONE', ( 33.66787794633571500, -30.47318289228771000, 25.73797856209867900 ) ) ; +#4483 = DATE_TIME_ROLE ( 'creation_date' ) ; +#4484 = CARTESIAN_POINT ( 'NONE', ( 5.115951387127118700, -19.01785453599290000, 16.98817544501506700 ) ) ; +#4485 = CARTESIAN_POINT ( 'NONE', ( 34.91603483285175000, -35.31373364390467600, 13.85533360785880300 ) ) ; +#4486 = CARTESIAN_POINT ( 'NONE', ( 7.009027114557448500, -29.77072179817409700, 26.02768065461925300 ) ) ; +#4487 = CARTESIAN_POINT ( 'NONE', ( 34.92051596316366600, -100.0000000000000100, -4.448475004225461000 ) ) ; +#4488 = FACE_OUTER_BOUND ( 'NONE', #12590, .T. ) ; +#4489 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999972500, -90.35119345078946700, -3.700829972689411400 ) ) ; +#4490 = CARTESIAN_POINT ( 'NONE', ( 12.81785151803197600, -31.01398849223847500, 28.30731093156401800 ) ) ; +#4491 = CARTESIAN_POINT ( 'NONE', ( 34.58415707349906400, -100.0000000000000100, -28.92069478362982000 ) ) ; +#4492 = ORIENTED_EDGE ( 'NONE', *, *, #9595, .T. ) ; +#4493 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14326, #6527, #4336, #12171, #5434, #13276, #6571, #14370, #7712, #1063, #8853, #2150, #9972, #3260, #11107, #4381, #12212, #5484, #13322, #6616, #23, #7763, #1108, #8898, #2201, #10016, #3304 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -5.999999999374031500E-008, 0.0003056169349222159600, 0.0006112938698444230000, 0.001222647739688837400, 0.002445355479377668000, 0.003668063219066498500, 0.004890770958755329500, 0.007336186438132983600, 0.009781601917510637800, 0.01222701739688829500, 0.01344972513657712200, 0.01467243287626595000, 0.01711784835564360300, 0.01956326383502125400 ), + .UNSPECIFIED. ) ; +#4494 = CARTESIAN_POINT ( 'NONE', ( 37.49827486767824100, -21.21128706431331100, 8.031211771459835400 ) ) ; +#4495 = CARTESIAN_POINT ( 'NONE', ( 29.75950659219064300, -30.86842954708823700, 27.59777557104448000 ) ) ; +#4496 = CARTESIAN_POINT ( 'NONE', ( 2.911282948077468000, -28.75469241002414500, 19.31687988920414500 ) ) ; +#4497 = CARTESIAN_POINT ( 'NONE', ( 8.938985190281224300, -30.91895498872997900, 27.05055053960039000 ) ) ; +#4498 = CARTESIAN_POINT ( 'NONE', ( 35.94237067805658400, -30.51094805232044000, 23.61255767061127400 ) ) ; +#4499 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#4500 = EDGE_CURVE ( 'NONE', #11411, #12696, #3866, .T. ) ; +#4501 = CYLINDRICAL_SURFACE ( 'NONE', #1294, 2.500000000000000900 ) ; +#4502 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.02959941705152100, 6.855609505516117300 ) ) ; +#4503 = CARTESIAN_POINT ( 'NONE', ( 5.537341829050704200, -31.12093887752891400, 24.50416373573105100 ) ) ; +#4504 = CARTESIAN_POINT ( 'NONE', ( 2.201737535575497800, -18.80695014230185100, 7.934335535720068200 ) ) ; +#4505 = ORIENTED_EDGE ( 'NONE', *, *, #9398, .T. ) ; +#4506 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -19.99999999999999600 ) ) ; +#4507 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4508 = AXIS2_PLACEMENT_3D ( 'NONE', #6603, #8, #7747 ) ; +#4509 = CARTESIAN_POINT ( 'NONE', ( 13.29279691331376300, -11.68860824032028100, 24.70225280738490200 ) ) ; +#4510 = CARTESIAN_POINT ( 'NONE', ( 3.619723155504407200, -28.90517070848054700, 22.05783846337975600 ) ) ; +#4511 = CARTESIAN_POINT ( 'NONE', ( -1.500922423586149500E-014, -95.07596123493894400, 22.49881262457337200 ) ) ; +#4512 = CARTESIAN_POINT ( 'NONE', ( 31.63008010021629000, -31.06315696444417200, 26.70145231930461100 ) ) ; +#4513 = CARTESIAN_POINT ( 'NONE', ( 30.81077085008478300, -11.82694040573393900, -24.99999999999999600 ) ) ; +#4514 = CARTESIAN_POINT ( 'NONE', ( 28.83674303020393000, -30.82029694273273900, 27.90901057071048200 ) ) ; +#4515 = CARTESIAN_POINT ( 'NONE', ( 36.71407606980348200, -30.45233536849937700, 21.54663750061921600 ) ) ; +#4516 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4517 = CARTESIAN_POINT ( 'NONE', ( 6.004432186173207100, -21.81987297256316100, -16.85317375653818000 ) ) ; +#4518 = CARTESIAN_POINT ( 'NONE', ( 5.523865501243046900, -22.99606522478933700, 11.12442699013637100 ) ) ; +#4519 = ORIENTED_EDGE ( 'NONE', *, *, #8352, .F. ) ; +#4520 = EDGE_CURVE ( 'NONE', #9639, #7318, #7442, .T. ) ; +#4521 = CARTESIAN_POINT ( 'NONE', ( 4.231424791804258200, -30.86507860199919400, 23.05798227867118300 ) ) ; +#4522 = CARTESIAN_POINT ( 'NONE', ( 3.939215006182755100, -10.00000000000000400, 19.30358805593479600 ) ) ; +#4523 = ADVANCED_FACE ( 'NONE', ( #7195 ), #7056, .T. ) ; +#4524 = ORIENTED_EDGE ( 'NONE', *, *, #10075, .T. ) ; +#4525 = CARTESIAN_POINT ( 'NONE', ( 30.10969968908418400, -12.49999999999869800, -20.37085458458228300 ) ) ; +#4526 = CARTESIAN_POINT ( 'NONE', ( 4.948788628154296100, -35.14695772055536300, 13.67860515941128500 ) ) ; +#4527 = CARTESIAN_POINT ( 'NONE', ( 33.99232866801149600, -29.49682506141134700, 25.24455525336772500 ) ) ; +#4528 = CARTESIAN_POINT ( 'NONE', ( 28.33480902793285900, -24.03466580544243000, 18.55324432575130800 ) ) ; +#4529 = CARTESIAN_POINT ( 'NONE', ( 33.50236390854318100, -31.16780518069976900, 25.37764169679169500 ) ) ; +#4530 = ORIENTED_EDGE ( 'NONE', *, *, #13556, .F. ) ; +#4531 = CARTESIAN_POINT ( 'NONE', ( 6.154186894994296600, -19.48716189004952100, 18.12060823013180400 ) ) ; +#4532 = CARTESIAN_POINT ( 'NONE', ( 24.69325152697232900, -39.40499146286328600, 19.69197091800285500 ) ) ; +#4533 = CARTESIAN_POINT ( 'NONE', ( 6.983691241874511000, -30.65070460175158800, 26.11551435964366200 ) ) ; +#4534 = CARTESIAN_POINT ( 'NONE', ( 30.18167656173557800, -100.0000000000000100, 3.977574556406460200 ) ) ; +#4535 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#4536 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14294, #4055, #981, #8771, #2078, #9901 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.002128540118321335300, 0.003192548568959128000, 0.004256557019596918100 ), + .UNSPECIFIED. ) ; +#4537 = CARTESIAN_POINT ( 'NONE', ( 8.091950951196722000, -32.21533968507363000, 26.54931510588055600 ) ) ; +#4538 = CARTESIAN_POINT ( 'NONE', ( 10.24843308864868900, -11.15007701597043500, -25.04837670029805000 ) ) ; +#4539 = ORIENTED_EDGE ( 'NONE', *, *, #9671, .T. ) ; +#4540 = EDGE_CURVE ( 'NONE', #5564, #1747, #12281, .T. ) ; +#4541 = CARTESIAN_POINT ( 'NONE', ( 37.49673712720790100, -20.38644073654775500, 8.301904619144162100 ) ) ; +#4542 = CARTESIAN_POINT ( 'NONE', ( 29.55543786623700300, -30.67974793522210300, 27.70191629419289100 ) ) ; +#4543 = CARTESIAN_POINT ( 'NONE', ( 2.500380676439983900, -27.18468536292451200, 7.381868651761875500 ) ) ; +#4544 = CARTESIAN_POINT ( 'NONE', ( 8.933467977321354800, -30.52905641361627100, 27.13190805437293200 ) ) ; +#4545 = CARTESIAN_POINT ( 'NONE', ( 35.47388171583589400, -29.15162131220693100, 23.70597383091937600 ) ) ; +#4546 = ORIENTED_EDGE ( 'NONE', *, *, #12306, .F. ) ; +#4547 = CARTESIAN_POINT ( 'NONE', ( 5.220940278463113600, -30.34884843479503800, 24.98966014234385800 ) ) ; +#4548 = CARTESIAN_POINT ( 'NONE', ( 2.422926719288670300, -10.00094723518783900, 20.29284242109762500 ) ) ; +#4549 = ORIENTED_EDGE ( 'NONE', *, *, #3683, .F. ) ; +#4550 = CARTESIAN_POINT ( 'NONE', ( 5.711868520323816900, -12.50000000000091500, 13.89359804293967000 ) ) ; +#4551 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 14.31000000000000900 ) ) ; +#4552 = CARTESIAN_POINT ( 'NONE', ( 2.728979428450035300, -30.06475311912076300, 21.99634736220570400 ) ) ; +#4553 = CARTESIAN_POINT ( 'NONE', ( 35.38600913850551400, -10.00125729456943400, 22.59357970229749700 ) ) ; +#4554 = EDGE_LOOP ( 'NONE', ( #10504, #10550 ) ) ; +#4555 = CARTESIAN_POINT ( 'NONE', ( 31.55263017125056600, -30.37710930368559300, 26.91369362884575600 ) ) ; +#4556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4557 = CARTESIAN_POINT ( 'NONE', ( 28.83715117114670800, -30.83545212943141700, 27.90621942289594100 ) ) ; +#4558 = CARTESIAN_POINT ( 'NONE', ( 36.70181909142683500, -28.99962902916759700, 21.86568914435697100 ) ) ; +#4559 = CARTESIAN_POINT ( 'NONE', ( 27.85979486090452500, -28.66209327216550700, 28.53704757351325200 ) ) ; +#4560 = CARTESIAN_POINT ( 'NONE', ( 6.499461831167790700, -12.50000000000006900, -16.44668213793666200 ) ) ; +#4561 = CARTESIAN_POINT ( 'NONE', ( 5.084031607000347300, -12.50000000000004400, 11.63444940020957400 ) ) ; +#4562 = ORIENTED_EDGE ( 'NONE', *, *, #9947, .T. ) ; +#4563 = CARTESIAN_POINT ( 'NONE', ( 6.720422576663382900, -12.39534562125745000, -23.82369598389548000 ) ) ; +#4564 = CARTESIAN_POINT ( 'NONE', ( 3.677038673867179000, -29.82563722858792600, 23.43745589201110500 ) ) ; +#4565 = CARTESIAN_POINT ( 'NONE', ( 2.606635454160271000, -19.94033355002831000, 10.10928816722849700 ) ) ; +#4566 = VERTEX_POINT ( 'NONE', #8783 ) ; +#4567 = CARTESIAN_POINT ( 'NONE', ( 24.06225670493013200, -12.50000000000002000, -13.98450169049431000 ) ) ; +#4568 = CARTESIAN_POINT ( 'NONE', ( 2.508539671093608500, -27.63193620926497100, 7.184123274769849100 ) ) ; +#4569 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1095, #11, #2189, #10007, #3295, #11142 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.002350339031547533100, 0.004700678063095066300 ), + .UNSPECIFIED. ) ; +#4570 = CARTESIAN_POINT ( 'NONE', ( 34.21790817469703000, -30.30036392701925200, 25.38951518393109200 ) ) ; +#4571 = CARTESIAN_POINT ( 'NONE', ( 29.35969680391159300, -12.49999999999977100, 20.01783490992996700 ) ) ; +#4572 = CARTESIAN_POINT ( 'NONE', ( 33.56885554890091300, -30.28786747046651900, 25.82022852193499300 ) ) ; +#4573 = LINE ( 'NONE', #7622, #4764 ) ; +#4574 = VERTEX_POINT ( 'NONE', #11039 ) ; +#4575 = CARTESIAN_POINT ( 'NONE', ( 10.85478920384735300, -30.83916959230148800, 27.81061259871882300 ) ) ; +#4576 = CARTESIAN_POINT ( 'NONE', ( 7.604853377760296200, -19.86705806815965400, 19.52048709350104600 ) ) ; +#4577 = CARTESIAN_POINT ( 'NONE', ( 25.42084560613792700, -28.05960037667342300, 27.34260980482535100 ) ) ; +#4578 = CARTESIAN_POINT ( 'NONE', ( 34.90410223430019000, -22.27831667252874200, -13.56186380365808100 ) ) ; +#4579 = CARTESIAN_POINT ( 'NONE', ( 7.064320012525620000, -29.91724663599427100, 26.11739164855803000 ) ) ; +#4580 = CARTESIAN_POINT ( 'NONE', ( 39.97360930418398800, -10.10556278326405400, 11.00892978979641900 ) ) ; +#4581 = EDGE_CURVE ( 'NONE', #11281, #12609, #7389, .T. ) ; +#4582 = CARTESIAN_POINT ( 'NONE', ( 4.468205166462963600, -31.01853905187910600, 22.20996445262735700 ) ) ; +#4583 = CARTESIAN_POINT ( 'NONE', ( 10.85705058879635100, -11.87757334018049200, 23.94753610601948800 ) ) ; +#4584 = CARTESIAN_POINT ( 'NONE', ( 37.57897746482427700, -19.57805072302408100, 8.831840453402758600 ) ) ; +#4585 = CARTESIAN_POINT ( 'NONE', ( 9.047265892775799400, -31.02843014578070700, 27.05425672625939600 ) ) ; +#4586 = CARTESIAN_POINT ( 'NONE', ( 35.98055593419479700, -30.20443344528344600, 23.85327642269232100 ) ) ; +#4587 = CIRCLE ( 'NONE', #10752, 2.500000000000005300 ) ; +#4588 = VERTEX_POINT ( 'NONE', #7643 ) ; +#4589 = CARTESIAN_POINT ( 'NONE', ( 31.86006669528840300, -29.04582310753031000, 27.10713928904817000 ) ) ; +#4590 = LINE ( 'NONE', #7664, #10341 ) ; +#4591 = ADVANCED_FACE ( 'NONE', ( #7374 ), #7689, .F. ) ; +#4592 = CARTESIAN_POINT ( 'NONE', ( 24.05613275712082100, -18.58395191037495300, 23.48641767709999300 ) ) ; +#4593 = CARTESIAN_POINT ( 'NONE', ( 5.536593950067209700, -29.37692268583336400, 24.81253393147315500 ) ) ; +#4594 = CARTESIAN_POINT ( 'NONE', ( 14.98652023108779100, -17.09731411596381500, -26.25144796920741900 ) ) ; +#4595 = ORIENTED_EDGE ( 'NONE', *, *, #3563, .T. ) ; +#4596 = CARTESIAN_POINT ( 'NONE', ( 15.41638815777224800, -12.50000000000000000, 8.988457384234605400 ) ) ; +#4597 = CARTESIAN_POINT ( 'NONE', ( 0.4656456697525583300, -11.86258267901016000, 8.074104273717194900 ) ) ; +#4598 = CARTESIAN_POINT ( 'NONE', ( 35.48383816994874000, -31.25046089291242500, 24.60414596916900700 ) ) ; +#4599 = EDGE_CURVE ( 'NONE', #12896, #4138, #7070, .T. ) ; +#4600 = CARTESIAN_POINT ( 'NONE', ( 3.485658393630712800, -29.00190465357746900, 22.20011038976622300 ) ) ; +#4601 = CIRCLE ( 'NONE', #10830, 5.000000000000000900 ) ; +#4602 = ORIENTED_EDGE ( 'NONE', *, *, #3029, .T. ) ; +#4603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669240300, 0.9848077530122092400 ) ) ; +#4604 = CARTESIAN_POINT ( 'NONE', ( 31.55262905707020900, -30.89858880766951900, 26.82174902615904700 ) ) ; +#4605 = CARTESIAN_POINT ( 'NONE', ( 30.48146616965016200, -11.44107644259483300, -24.99999999999998900 ) ) ; +#4606 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#4607 = CARTESIAN_POINT ( 'NONE', ( 37.26757548713176500, -30.13634671056077600, 21.66583481411767000 ) ) ; +#4608 = CARTESIAN_POINT ( 'NONE', ( 30.09775028997366400, -20.34202322626676800, 21.10820805529977300 ) ) ; +#4609 = CARTESIAN_POINT ( 'NONE', ( 15.20065606978139700, -12.50000000000002300, 8.576791441350147600 ) ) ; +#4610 = CARTESIAN_POINT ( 'NONE', ( 3.573349383861578900, -30.58061852312670900, 21.58594518625542200 ) ) ; +#4611 = ORIENTED_EDGE ( 'NONE', *, *, #2394, .F. ) ; +#4612 = AXIS2_PLACEMENT_3D ( 'NONE', #1122, #8911, #2214 ) ; +#4613 = CARTESIAN_POINT ( 'NONE', ( 4.482471619646084100, -30.95522396431534400, 23.28524787770508900 ) ) ; +#4614 = LINE ( 'NONE', #8740, #3371 ) ; +#4615 = CARTESIAN_POINT ( 'NONE', ( 16.61324289376140600, -19.56561309030341200, 23.32267344219933800 ) ) ; +#4616 = CARTESIAN_POINT ( 'NONE', ( 29.54804192829600100, -21.06731259707366300, -22.23473768682301700 ) ) ; +#4617 = CARTESIAN_POINT ( 'NONE', ( 36.25904745092724100, -95.39149526405329000, 12.92977595461170800 ) ) ; +#4618 = CARTESIAN_POINT ( 'NONE', ( 34.00236538159268900, -31.13614936077619800, 24.96851320722808900 ) ) ; +#4619 = CARTESIAN_POINT ( 'NONE', ( 23.83347679890751200, -12.50000000000000500, 9.744347706578592400 ) ) ; +#4620 = EDGE_CURVE ( 'NONE', #2004, #11105, #7033, .T. ) ; +#4621 = CARTESIAN_POINT ( 'NONE', ( 33.46157558722978800, -31.05833347620345100, 25.52782865717705700 ) ) ; +#4622 = EDGE_LOOP ( 'NONE', ( #408, #11603, #1235, #13158, #14141, #2847, #6423 ) ) ; +#4623 = CARTESIAN_POINT ( 'NONE', ( 10.85478794666844500, -30.77118177002025900, 27.82260022297016300 ) ) ; +#4624 = CARTESIAN_POINT ( 'NONE', ( 9.648800112414255300, -20.13814882678751800, 20.96917665443195100 ) ) ; +#4625 = DIRECTION ( 'NONE', ( -0.9997148816737818600, -0.02351516685511849700, -0.004146358372418624700 ) ) ; +#4626 = CARTESIAN_POINT ( 'NONE', ( 34.42811985985365200, -12.49999999999988100, -14.36683954810913000 ) ) ; +#4627 = CARTESIAN_POINT ( 'NONE', ( 7.307479012599345400, -30.93854175734821900, 26.16662710990947000 ) ) ; +#4628 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000149900, -9.999999999999321400, -17.03478347383240900 ) ) ; +#4629 = CARTESIAN_POINT ( 'NONE', ( 26.70720308668624600, -11.25448779615296000, 22.24023342485438100 ) ) ; +#4630 = CARTESIAN_POINT ( 'NONE', ( 0.8537106419069756500, -11.88877048518766000, 11.65586802372345500 ) ) ; +#4631 = CARTESIAN_POINT ( 'NONE', ( 37.67491013606657900, -18.84093884541971100, 9.885287539034632000 ) ) ; +#4632 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999987600, -22.03500000000001400, 8.479169887521827300 ) ) ; +#4633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4634 = CARTESIAN_POINT ( 'NONE', ( 9.029064580114345900, -30.65956845852711200, 27.16093966601581400 ) ) ; +#4635 = CARTESIAN_POINT ( 'NONE', ( 35.45286528602777300, -30.97031653417944600, 23.37097540053118300 ) ) ; +#4636 = VERTEX_POINT ( 'NONE', #5413 ) ; +#4637 = CARTESIAN_POINT ( 'NONE', ( 33.96600318549703700, -28.48511287729143900, 23.83349139542259100 ) ) ; +#4638 = CARTESIAN_POINT ( 'NONE', ( 24.90837253921665700, -16.74465669222833200, 23.81073504954426700 ) ) ; +#4639 = CARTESIAN_POINT ( 'NONE', ( 5.629397428902701800, -30.63909192767253100, 25.16172828814928100 ) ) ; +#4640 = CARTESIAN_POINT ( 'NONE', ( 7.294570969234184700, -23.50053766418922800, 14.74034345050481100 ) ) ; +#4641 = CARTESIAN_POINT ( 'NONE', ( 40.00000000726988200, -10.00000000000000000, -11.53233011317689000 ) ) ; +#4642 = CARTESIAN_POINT ( 'NONE', ( 31.19354002942688100, -32.38391304138834000, 24.73774488322501600 ) ) ; +#4643 = CARTESIAN_POINT ( 'NONE', ( 3.296526441285204900, -30.48380201473498700, 22.04038488663058700 ) ) ; +#4644 = CARTESIAN_POINT ( 'NONE', ( 17.46566260175918500, -19.87368928020448100, 23.25900218076807500 ) ) ; +#4645 = CARTESIAN_POINT ( 'NONE', ( 31.34254848396465900, -30.25445896547330400, 26.99909880834640300 ) ) ; +#4646 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#4647 = CARTESIAN_POINT ( 'NONE', ( 36.39940073310819500, -28.89958739882326100, 22.00204665906110400 ) ) ; +#4648 = CARTESIAN_POINT ( 'NONE', ( 14.64070171165608200, -22.03500000000001400, 20.04738498524952200 ) ) ; +#4649 = CARTESIAN_POINT ( 'NONE', ( 30.82928431689367000, -27.08701646028735500, 19.47633101245178000 ) ) ; +#4650 = CARTESIAN_POINT ( 'NONE', ( 4.833134861422658800, -31.02743952761184000, 23.72857580685067800 ) ) ; +#4651 = CARTESIAN_POINT ( 'NONE', ( 3.928124972397976300, -30.18682657786128600, 23.74103612451695300 ) ) ; +#4652 = EDGE_CURVE ( 'NONE', #9297, #12157, #9731, .T. ) ; +#4653 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000006400, -12.50000000000000400, -14.54982113999827800 ) ) ; +#4654 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000200, 8.005331014629280900 ) ) ; +#4655 = CARTESIAN_POINT ( 'NONE', ( 17.54998522986896200, -19.89708724304267000, 23.25492121916194000 ) ) ; +#4656 = VECTOR ( 'NONE', #12465, 1000.000000000000000 ) ; +#4657 = ADVANCED_FACE ( 'NONE', ( #7030 ), #9185, .T. ) ; +#4658 = PLANE ( 'NONE', #7860 ) ; +#4659 = CARTESIAN_POINT ( 'NONE', ( 28.56020520377021300, -12.50000000000009900, -21.37621574451556900 ) ) ; +#4660 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4661 = CARTESIAN_POINT ( 'NONE', ( 33.90373592054246600, -30.06311375100465400, 25.57174597427207600 ) ) ; +#4662 = VERTEX_POINT ( 'NONE', #13342 ) ; +#4663 = CARTESIAN_POINT ( 'NONE', ( 29.52658989509809100, -23.93479377289964900, 17.84097225377236000 ) ) ; +#4664 = CARTESIAN_POINT ( 'NONE', ( 33.32889693432540000, -29.97951289735124900, 25.91049246994714400 ) ) ; +#4665 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12527, #3817, #1655, #9451 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 6.499209280350619000E-005 ), + .UNSPECIFIED. ) ; +#4666 = CARTESIAN_POINT ( 'NONE', ( 11.05976278816930100, -30.84325950241719700, 27.87368024721437700 ) ) ; +#4667 = CARTESIAN_POINT ( 'NONE', ( 11.34357721882044800, -19.14999864060412100, 22.10185304953535000 ) ) ; +#4668 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4669 = CARTESIAN_POINT ( 'NONE', ( 24.93679552054700500, -12.49999999999992000, -12.54863818957807500 ) ) ; +#4670 = CARTESIAN_POINT ( 'NONE', ( 4.871021172661515100, -12.50000000000175100, 9.181481365165941700 ) ) ; +#4671 = AXIS2_PLACEMENT_3D ( 'NONE', #13944, #1735, #9544 ) ; +#4672 = FACE_OUTER_BOUND ( 'NONE', #11372, .T. ) ; +#4673 = CARTESIAN_POINT ( 'NONE', ( 22.42572295890072800, -33.35320608433639200, 26.50719968128652600 ) ) ; +#4674 = CARTESIAN_POINT ( 'NONE', ( 24.87485788437090400, -12.49999999999990400, 8.386269893785172500 ) ) ; +#4675 = CARTESIAN_POINT ( 'NONE', ( 36.99724444216443000, -20.90229052173041100, 11.78861628768300600 ) ) ; +#4676 = ORIENTED_EDGE ( 'NONE', *, *, #2473, .F. ) ; +#4677 = CARTESIAN_POINT ( 'NONE', ( 37.50251547203790600, -10.00000000000018500, 20.47431314312642300 ) ) ; +#4678 = CARTESIAN_POINT ( 'NONE', ( 9.048208760935708000, -30.32466473632144500, 27.17619735810313100 ) ) ; +#4679 = CARTESIAN_POINT ( 'NONE', ( 35.78856611771635000, -29.96421717901884900, 24.09627220154481700 ) ) ; +#4680 = EDGE_CURVE ( 'NONE', #7194, #1781, #1306, .T. ) ; +#4681 = CARTESIAN_POINT ( 'NONE', ( 27.19748165516550700, -12.51943020393350500, 24.44954274604770500 ) ) ; +#4682 = CARTESIAN_POINT ( 'NONE', ( 5.760336419478569800, -29.65504820329041300, 25.17675672932040200 ) ) ; +#4683 = CARTESIAN_POINT ( 'NONE', ( 1.331693335042165700E-005, -9.999999999999801000, 7.888776785523166500 ) ) ; +#4684 = CARTESIAN_POINT ( 'NONE', ( 25.20377504235627700, -31.18104598916631400, 28.61116263897599800 ) ) ; +#4685 = CARTESIAN_POINT ( 'NONE', ( 16.46545004268239900, -10.00000000000000000, -29.31274364000457700 ) ) ; +#4686 = VERTEX_POINT ( 'NONE', #141 ) ; +#4687 = CARTESIAN_POINT ( 'NONE', ( 3.000810126207829500, -29.32050022875607800, 22.23837298335594100 ) ) ; +#4688 = CARTESIAN_POINT ( 'NONE', ( 37.79875055962731500, -18.80499776149059300, -11.53187062879839800 ) ) ; +#4689 = CARTESIAN_POINT ( 'NONE', ( 31.36632928011198000, -30.72735818643747800, 26.96827143428737400 ) ) ; +#4690 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#4691 = CARTESIAN_POINT ( 'NONE', ( 37.46338653986453000, -29.81152152177193700, 21.83319920031936000 ) ) ; +#4692 = CARTESIAN_POINT ( 'NONE', ( 10.17828621111027400, -100.0000000000000100, 4.226339706232145100 ) ) ; +#4693 = ORIENTED_EDGE ( 'NONE', *, *, #4883, .F. ) ; +#4694 = CARTESIAN_POINT ( 'NONE', ( 36.35855019947919700, -28.87712604289365700, 22.01586585699741900 ) ) ; +#4695 = CARTESIAN_POINT ( 'NONE', ( 6.836172580234162400, -31.16911092288271600, 25.64853424726808800 ) ) ; +#4696 = EDGE_CURVE ( 'NONE', #154, #12341, #6011, .T. ) ; +#4697 = CARTESIAN_POINT ( 'NONE', ( 4.460887674522653300, -29.13568513870221500, 23.61916223001820800 ) ) ; +#4698 = CARTESIAN_POINT ( 'NONE', ( 32.55168642279250700, -14.40795953955839600, -25.77724219669164900 ) ) ; +#4699 = CARTESIAN_POINT ( 'NONE', ( 35.82971059029519300, -19.79869320978816600, 15.10380698118804900 ) ) ; +#4700 = ORIENTED_EDGE ( 'NONE', *, *, #14031, .T. ) ; +#4701 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -19.99999999999999300 ) ) ; +#4702 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, -19.99999999999999600 ) ) ; +#4703 = CARTESIAN_POINT ( 'NONE', ( 16.37735061641297900, -12.49999999999998600, 9.873377215236823500 ) ) ; +#4704 = CARTESIAN_POINT ( 'NONE', ( 23.62118169432536200, -12.49999999999998600, -14.27777956172181600 ) ) ; +#4705 = CARTESIAN_POINT ( 'NONE', ( 36.11484004606963100, -10.00000000000000200, -21.99543431434618100 ) ) ; +#4706 = ORIENTED_EDGE ( 'NONE', *, *, #9041, .T. ) ; +#4707 = CARTESIAN_POINT ( 'NONE', ( 31.71036168921769200, -12.49999999999988100, 18.04174152327591700 ) ) ; +#4708 = CARTESIAN_POINT ( 'NONE', ( 33.36697316407718000, -30.76378633841715900, 25.82934287854921300 ) ) ; +#4709 = CARTESIAN_POINT ( 'NONE', ( 11.06046104630432800, -30.81139885552416000, 27.87966474737328000 ) ) ; +#4710 = CARTESIAN_POINT ( 'NONE', ( 12.77026190699168700, -19.44474845912066000, 22.57996576599011000 ) ) ; +#4711 = CARTESIAN_POINT ( 'NONE', ( 5.668122886110474200, -21.94111993680655500, -15.98167969573763300 ) ) ; +#4712 = CARTESIAN_POINT ( 'NONE', ( 38.99618697209097500, -10.00000000000000000, -21.92993261894524400 ) ) ; +#4713 = CARTESIAN_POINT ( 'NONE', ( 34.46129431774929200, -21.99706548482184600, -15.58153531712533500 ) ) ; +#4714 = CARTESIAN_POINT ( 'NONE', ( 15.05049221083588100, -12.49999999999999100, 8.079760354033780300 ) ) ; +#4715 = ORIENTED_EDGE ( 'NONE', *, *, #10352, .F. ) ; +#4716 = CARTESIAN_POINT ( 'NONE', ( 22.43162731752757800, -19.88692979130461300, 23.25666752142275200 ) ) ; +#4717 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 8.981438871123701900, -19.99999999999999600 ) ) ; +#4718 = CARTESIAN_POINT ( 'NONE', ( 6.322206419074745100, -95.07596123493895800, 14.95218780205567600 ) ) ; +#4719 = EDGE_CURVE ( 'NONE', #8982, #7937, #1943, .T. ) ; +#4720 = CARTESIAN_POINT ( 'NONE', ( 36.57429264943517900, -20.15614579011980100, 13.27080571383474000 ) ) ; +#4721 = ORIENTED_EDGE ( 'NONE', *, *, #10820, .F. ) ; +#4722 = CARTESIAN_POINT ( 'NONE', ( 30.46525147365245800, -10.00000000000000400, -27.40150186913825100 ) ) ; +#4723 = FACE_OUTER_BOUND ( 'NONE', #4185, .T. ) ; +#4724 = CARTESIAN_POINT ( 'NONE', ( 9.228720917312752900, -30.75508432130365600, 27.22903150402121500 ) ) ; +#4725 = CARTESIAN_POINT ( 'NONE', ( 35.37416328928137700, -30.94974941425023100, 23.59197943074044100 ) ) ; +#4726 = CARTESIAN_POINT ( 'NONE', ( 15.38322539218324700, -31.22277490459412200, 28.68222298652694100 ) ) ; +#4727 = ADVANCED_FACE ( 'NONE', ( #7043 ), #266, .T. ) ; +#4728 = ORIENTED_EDGE ( 'NONE', *, *, #10843, .T. ) ; +#4729 = CARTESIAN_POINT ( 'NONE', ( 5.927606507319037400, -30.99388635341518500, 25.08361691536111600 ) ) ; +#4730 = CARTESIAN_POINT ( 'NONE', ( 0.002739849956483022900, -10.00000000000000000, -20.16550224408080500 ) ) ; +#4731 = CARTESIAN_POINT ( 'NONE', ( 17.52044429397659900, -30.66267915277524700, 28.85661217164348000 ) ) ; +#4732 = ORIENTED_EDGE ( 'NONE', *, *, #10330, .F. ) ; +#4733 = CARTESIAN_POINT ( 'NONE', ( 3.824841076872294000, -30.74083654245778500, 22.30943039466881200 ) ) ; +#4734 = CIRCLE ( 'NONE', #9389, 3.189999999999994200 ) ; +#4735 = CARTESIAN_POINT ( 'NONE', ( 31.24261140429020900, -30.24859647168616000, 27.04283685620016800 ) ) ; +#4736 = CARTESIAN_POINT ( 'NONE', ( 13.45387821612571200, -30.34822880135686800, 25.95597450183099000 ) ) ; +#4737 = CARTESIAN_POINT ( 'NONE', ( 7.262663198730470200, -30.51273277557150400, 26.31587710100781800 ) ) ; +#4738 = CARTESIAN_POINT ( 'NONE', ( 36.39763560650564500, -30.60781135101699100, 21.70115701001461900 ) ) ; +#4739 = CARTESIAN_POINT ( 'NONE', ( 6.646494699878918900, -22.03500000000001400, 13.97561306327793500 ) ) ; +#4740 = EDGE_LOOP ( 'NONE', ( #5486, #3228, #9180 ) ) ; +#4741 = CARTESIAN_POINT ( 'NONE', ( 35.48581890310174500, -22.23767346804745100, 15.24614660885125000 ) ) ; +#4742 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6706, #13397, #5571, #107 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001030692894525602500 ), + .UNSPECIFIED. ) ; +#4743 = DIRECTION ( 'NONE', ( -8.673617379884038400E-016, -3.469446951953613700E-016, 1.000000000000000000 ) ) ; +#4744 = CARTESIAN_POINT ( 'NONE', ( 9.243852124090732800, -31.01957320784564900, 27.14724162546621900 ) ) ; +#4745 = CARTESIAN_POINT ( 'NONE', ( 4.139067961872871800, -30.52335103920483300, 23.72045659274883900 ) ) ; +#4746 = FACE_OUTER_BOUND ( 'NONE', #4922, .T. ) ; +#4747 = CARTESIAN_POINT ( 'NONE', ( 37.42005162154356400, -12.99467844005949900, -19.31914476455235500 ) ) ; +#4748 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561060996500, 7.000000000000000000, -20.68999999999999400 ) ) ; +#4749 = ORIENTED_EDGE ( 'NONE', *, *, #10610, .T. ) ; +#4750 = CARTESIAN_POINT ( 'NONE', ( 11.20959486697398500, -10.26413982828822200, -25.03312147987020700 ) ) ; +#4751 = VECTOR ( 'NONE', #11716, 1000.000000000000000 ) ; +#4752 = CARTESIAN_POINT ( 'NONE', ( 33.23664003695836300, -18.54088238239217600, -22.82935076965018300 ) ) ; +#4753 = AXIS2_PLACEMENT_3D ( 'NONE', #13756, #7124, #457 ) ; +#4754 = CARTESIAN_POINT ( 'NONE', ( 27.28498524465942100, -20.89647718631393400, -23.45159737460144500 ) ) ; +#4755 = CARTESIAN_POINT ( 'NONE', ( 33.97435970349241100, -12.33151289198806000, -23.38873684223443700 ) ) ; +#4756 = ORIENTED_EDGE ( 'NONE', *, *, #9744, .F. ) ; +#4757 = CARTESIAN_POINT ( 'NONE', ( 24.24445774703890100, -12.50000000000004100, 9.410371128425705200 ) ) ; +#4758 = CARTESIAN_POINT ( 'NONE', ( 33.17006233754015900, -29.74339468022458600, 25.90990917021064300 ) ) ; +#4759 = CARTESIAN_POINT ( 'NONE', ( 11.16271934695358300, -30.83581715467209200, 27.90612350710429400 ) ) ; +#4760 = CARTESIAN_POINT ( 'NONE', ( 14.23488660685874600, -19.70718026348695400, 22.93195834137076600 ) ) ; +#4761 = CARTESIAN_POINT ( 'NONE', ( 6.005814147739434000, -12.49999999999995700, -15.46423663794934300 ) ) ; +#4762 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4763 = CARTESIAN_POINT ( 'NONE', ( 33.83999634416178300, -12.49999999999965000, -15.79537958788965600 ) ) ; +#4764 = VECTOR ( 'NONE', #13195, 1000.000000000000000 ) ; +#4765 = CARTESIAN_POINT ( 'NONE', ( 5.331951067412426000, -22.89672035676910900, 10.41055269630012400 ) ) ; +#4766 = ORIENTED_EDGE ( 'NONE', *, *, #6373, .F. ) ; +#4767 = EDGE_CURVE ( 'NONE', #13825, #7194, #9146, .T. ) ; +#4768 = CARTESIAN_POINT ( 'NONE', ( 23.59626767867696600, -95.07596123493894400, 16.93034213548180100 ) ) ; +#4769 = CARTESIAN_POINT ( 'NONE', ( 9.749539393289911300, -94.71789415302113500, 17.47341708255948900 ) ) ; +#4770 = CARTESIAN_POINT ( 'NONE', ( 35.61988077291417900, -19.51134029626312500, 15.63743674090172000 ) ) ; +#4771 = FACE_OUTER_BOUND ( 'NONE', #7877, .T. ) ; +#4772 = CARTESIAN_POINT ( 'NONE', ( 35.31892448111754800, -20.22740216314931400, -19.55052110830864700 ) ) ; +#4773 = CARTESIAN_POINT ( 'NONE', ( 1.760871207554069100, -10.01817246180353600, -19.24966435566774000 ) ) ; +#4774 = CARTESIAN_POINT ( 'NONE', ( 9.241812723100887100, -30.39943693606086900, 27.26132105691689100 ) ) ; +#4775 = CARTESIAN_POINT ( 'NONE', ( 35.53903304503619900, -29.58105152786567200, 24.12020227466253900 ) ) ; +#4776 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999997900, -19.99999999999988600, 7.788262581895170700 ) ) ; +#4777 = FACE_OUTER_BOUND ( 'NONE', #3218, .T. ) ; +#4778 = VERTEX_POINT ( 'NONE', #10274 ) ; +#4779 = CARTESIAN_POINT ( 'NONE', ( 8.188293607365421800, -20.22596131648230500, 19.91483435444071000 ) ) ; +#4780 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524033600, 6.754920151478379400 ) ) ; +#4781 = CARTESIAN_POINT ( 'NONE', ( 5.811343976332147500, -30.08339624808829500, 25.39173693149432900 ) ) ; +#4782 = CARTESIAN_POINT ( 'NONE', ( 26.91226398760340600, -24.12490936283003200, 19.19716473067920500 ) ) ; +#4783 = CARTESIAN_POINT ( 'NONE', ( 4.710275732090743800, -12.20595920405189400, -22.36390528408638200 ) ) ; +#4784 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -97.51638471114853200, 22.06850012136330700 ) ) ; +#4785 = CARTESIAN_POINT ( 'NONE', ( 10.63020170641009800, -10.00000000000000400, -27.92093907370165700 ) ) ; +#4786 = EDGE_LOOP ( 'NONE', ( #3882, #344 ) ) ; +#4787 = EDGE_CURVE ( 'NONE', #12242, #1432, #6678, .T. ) ; +#4788 = CARTESIAN_POINT ( 'NONE', ( 2.916189603137200800, -29.74308569874056100, 22.48555061414300800 ) ) ; +#4789 = CARTESIAN_POINT ( 'NONE', ( 31.26824676842788300, -30.63236186744014200, 27.03230324297349800 ) ) ; +#4790 = CARTESIAN_POINT ( 'NONE', ( 7.360840105760535000, -29.86814343372195800, 26.26636614304196400 ) ) ; +#4791 = CARTESIAN_POINT ( 'NONE', ( 37.33879267169089600, -29.48600459283602500, 21.94475529997694000 ) ) ; +#4792 = CARTESIAN_POINT ( 'NONE', ( 36.78810697048123000, -26.26864665113069100, 11.72436332877735200 ) ) ; +#4793 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669238900, -0.9848077530122092400 ) ) ; +#4794 = CARTESIAN_POINT ( 'NONE', ( 22.54594542586619400, -33.17879905958958600, 28.41295234537445700 ) ) ; +#4795 = CARTESIAN_POINT ( 'NONE', ( 4.285078054752204000, -29.43732922499792100, 23.81633208134224600 ) ) ; +#4796 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.53410396372325400, 14.05311889860153400 ) ) ; +#4797 = ORIENTED_EDGE ( 'NONE', *, *, #2790, .T. ) ; +#4798 = CARTESIAN_POINT ( 'NONE', ( 10.09970055648885700, -10.54191156038017300, -24.99999999999999600 ) ) ; +#4799 = ADVANCED_FACE ( 'NONE', ( #6697 ), #11957, .F. ) ; +#4800 = CARTESIAN_POINT ( 'NONE', ( 10.89243829339453700, -28.94106800343587300, 28.18121015456572900 ) ) ; +#4801 = CARTESIAN_POINT ( 'NONE', ( 26.42559850239142000, -12.50000000000017400, -22.30892836445079700 ) ) ; +#4802 = CARTESIAN_POINT ( 'NONE', ( 30.77557002386242900, -10.00000000000000000, -27.51813413536970600 ) ) ; +#4803 = CARTESIAN_POINT ( 'NONE', ( 32.00904612926653000, -23.62646097513684000, 15.63957808657831100 ) ) ; +#4804 = EDGE_CURVE ( 'NONE', #4366, #13310, #1745, .T. ) ; +#4805 = CARTESIAN_POINT ( 'NONE', ( 33.30187663924559900, -30.54266262920004100, 25.96904915400677900 ) ) ; +#4806 = CARTESIAN_POINT ( 'NONE', ( 11.16314375950202900, -30.82256624837704400, 27.90858364701128400 ) ) ; +#4807 = CARTESIAN_POINT ( 'NONE', ( 15.72980426539071400, -19.95543646763756500, 23.14675077175487400 ) ) ; +#4808 = CARTESIAN_POINT ( 'NONE', ( 15.06837453053931800, -12.49999999999998600, -12.57156879478900000 ) ) ; +#4809 = CARTESIAN_POINT ( 'NONE', ( 24.78314527648852600, -12.49999999999999500, -13.02320955389149000 ) ) ; +#4810 = VERTEX_POINT ( 'NONE', #12515 ) ; +#4811 = CARTESIAN_POINT ( 'NONE', ( 12.66886051870214100, -20.88119785125509500, -26.26013822343536600 ) ) ; +#4812 = CARTESIAN_POINT ( 'NONE', ( 29.60844818509855300, -95.07596123493894400, 16.74121165743943300 ) ) ; +#4813 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997900, -95.07596123493894400, 16.93034213569669100 ) ) ; +#4814 = CARTESIAN_POINT ( 'NONE', ( 34.58018800551163700, -19.02812564890690100, 17.40019784573316000 ) ) ; +#4815 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#4816 = CARTESIAN_POINT ( 'NONE', ( 36.24311286946803500, -99.99999999999998600, 17.91938285900820600 ) ) ; +#4817 = CARTESIAN_POINT ( 'NONE', ( 9.333083991975865200, -30.87895315086908400, 27.23905274022905600 ) ) ; +#4818 = CARTESIAN_POINT ( 'NONE', ( 35.53903610875810400, -30.69121792871725800, 23.92446432002635200 ) ) ; +#4819 = CARTESIAN_POINT ( 'NONE', ( 17.55169821895790600, -27.96429675855994600, 27.45736485622413900 ) ) ; +#4820 = CARTESIAN_POINT ( 'NONE', ( 2.514510515101888700, -21.17482525094265000, 8.476827564754232800 ) ) ; +#4821 = CARTESIAN_POINT ( 'NONE', ( 6.249616570234973500, -31.16171661804232700, 25.16870188074555200 ) ) ; +#4822 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #575, #4935, #1673, #9467 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.9999098791636043000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#4823 = ORIENTED_EDGE ( 'NONE', *, *, #6763, .T. ) ; +#4824 = CARTESIAN_POINT ( 'NONE', ( 34.20318681981476800, -23.11143631341926500, 11.94848601045180700 ) ) ; +#4825 = CARTESIAN_POINT ( 'NONE', ( 6.689338081703320800, -10.00000000000000000, -23.92076981543727100 ) ) ; +#4826 = CARTESIAN_POINT ( 'NONE', ( 8.114261053147318500, -97.47426379319894400, 20.41779993046617000 ) ) ; +#4827 = CARTESIAN_POINT ( 'NONE', ( 18.67688643591766300, -20.43278219571814000, -26.79262766451576600 ) ) ; +#4828 = CARTESIAN_POINT ( 'NONE', ( 3.853500145448147200, -28.96886584380831000, 22.62222887848463800 ) ) ; +#4829 = CARTESIAN_POINT ( 'NONE', ( 31.24386113614553700, -31.05322908627150400, 26.90374906532751700 ) ) ; +#4830 = CARTESIAN_POINT ( 'NONE', ( -2.581332906757480300E-015, 5.300583124007070000, -20.22352373746558400 ) ) ; +#4831 = CARTESIAN_POINT ( 'NONE', ( 7.460808104407212800, -30.68275887503350700, 26.38300184083697500 ) ) ; +#4832 = CARTESIAN_POINT ( 'NONE', ( 36.57167867956194100, -30.54211781209055600, 21.76531353185595600 ) ) ; +#4833 = FACE_OUTER_BOUND ( 'NONE', #2088, .T. ) ; +#4834 = AXIS2_PLACEMENT_3D ( 'NONE', #3807, #11646, #4906 ) ; +#4835 = CARTESIAN_POINT ( 'NONE', ( 22.49183557490543700, -33.35180202424786700, 26.50734624027246200 ) ) ; +#4836 = EDGE_LOOP ( 'NONE', ( #132, #11407, #2977, #14183, #3789 ) ) ; +#4837 = CARTESIAN_POINT ( 'NONE', ( 4.561419408967500600, -30.88729743280618900, 23.65414828134454300 ) ) ; +#4838 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8718, #2033, #12907, #6200, #14003, #7325, #698, #8478, #1795, #9601, #2894, #10732, #4006, #11844 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003067464572761397100, 0.004601196859142090900, 0.006134929145522785600, 0.009202393718284174900, 0.01073612600466487500, 0.01226985829104557500 ), + .UNSPECIFIED. ) ; +#4839 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.999999999999998200, 20.00000000000000000 ) ) ; +#4840 = CARTESIAN_POINT ( 'NONE', ( 9.793901426062413800, -11.52073648655676800, -24.99999999999941000 ) ) ; +#4841 = CARTESIAN_POINT ( 'NONE', ( 24.87601587158550500, -12.49999999999991300, -12.79135177248179600 ) ) ; +#4842 = CARTESIAN_POINT ( 'NONE', ( 25.06311580512447200, -17.12108164023477700, -26.25563882500103200 ) ) ; +#4843 = CARTESIAN_POINT ( 'NONE', ( 6.660590014920162900, -31.04619807839672800, 25.98367538556806600 ) ) ; +#4844 = CARTESIAN_POINT ( 'NONE', ( 23.21937682898168400, -12.50000000000002700, -14.44079720975396000 ) ) ; +#4845 = EDGE_CURVE ( 'NONE', #13997, #5375, #6558, .T. ) ; +#4846 = CARTESIAN_POINT ( 'NONE', ( 27.41775078463976100, -19.17014514861528700, 22.61373016435513600 ) ) ; +#4847 = CARTESIAN_POINT ( 'NONE', ( 33.75606490925390100, -12.49999999999944900, 15.10089151703832900 ) ) ; +#4848 = CARTESIAN_POINT ( 'NONE', ( 33.16350360844587900, -31.16900506118760100, 25.64859077734946900 ) ) ; +#4849 = CARTESIAN_POINT ( 'NONE', ( 3.830670735465028500, -33.35968313354796100, 11.93967752764577400 ) ) ; +#4850 = ORIENTED_EDGE ( 'NONE', *, *, #3752, .T. ) ; +#4851 = CARTESIAN_POINT ( 'NONE', ( 11.16273932761926200, -30.80737352445283200, 27.91114470767336900 ) ) ; +#4852 = CARTESIAN_POINT ( 'NONE', ( 17.74006354885918700, -19.18578945824564400, 23.40915585526537900 ) ) ; +#4853 = CARTESIAN_POINT ( 'NONE', ( 5.096304769385071200, -22.27781396110025400, -13.56540273543385300 ) ) ; +#4854 = CARTESIAN_POINT ( 'NONE', ( 34.58374168592737200, -22.05312338993954300, -15.17851454161399400 ) ) ; +#4855 = CARTESIAN_POINT ( 'NONE', ( 33.19884784150930600, -21.60360218778913200, -18.40136321150166400 ) ) ; +#4856 = AXIS2_PLACEMENT_3D ( 'NONE', #2448, #10189, #11459 ) ; +#4857 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6166, #670, #2864, #10698, #3976, #11814 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.002128540118321339700, 0.003192548568959133600, 0.004256557019596927600 ), + .UNSPECIFIED. ) ; +#4858 = CARTESIAN_POINT ( 'NONE', ( 22.42002212273600400, -25.57016535934584700, 22.25482085744094700 ) ) ; +#4859 = CARTESIAN_POINT ( 'NONE', ( 31.90698476102815900, -94.71799171675229400, 16.81949576096670600 ) ) ; +#4860 = CARTESIAN_POINT ( 'NONE', ( 29.78438968165399500, -30.60869024701608200, 27.62794160337291400 ) ) ; +#4861 = ORIENTED_EDGE ( 'NONE', *, *, #5292, .T. ) ; +#4862 = CARTESIAN_POINT ( 'NONE', ( 33.06559326336645900, -20.32287384510234700, 18.76010598763862100 ) ) ; +#4863 = CARTESIAN_POINT ( 'NONE', ( 11.31186559264341100, -11.14063917059260900, 24.45614895767105800 ) ) ; +#4864 = CARTESIAN_POINT ( 'NONE', ( 9.333082090495375700, -30.53832453243794400, 27.29911565616206200 ) ) ; +#4865 = CARTESIAN_POINT ( 'NONE', ( 35.21719532872470600, -29.26396688160587400, 24.08416296053565700 ) ) ; +#4866 = EDGE_LOOP ( 'NONE', ( #7214, #13489, #7606, #461 ) ) ; +#4867 = EDGE_CURVE ( 'NONE', #5055, #13825, #1496, .T. ) ; +#4868 = ADVANCED_FACE ( 'NONE', ( #6137 ), #8118, .F. ) ; +#4869 = CARTESIAN_POINT ( 'NONE', ( 2.500551666394682700, -21.21984131744006100, 7.920870232500869100 ) ) ; +#4870 = CARTESIAN_POINT ( 'NONE', ( 37.41122825414324600, -91.17399001271007800, -1.749757557770210700 ) ) ; +#4871 = CARTESIAN_POINT ( 'NONE', ( 6.057597827526218600, -30.37208048941170100, 25.56838633001678600 ) ) ; +#4872 = ORIENTED_EDGE ( 'NONE', *, *, #10767, .T. ) ; +#4873 = CARTESIAN_POINT ( 'NONE', ( 10.45195807170045700, -23.93268740292576500, 17.82656316910922100 ) ) ; +#4874 = CARTESIAN_POINT ( 'NONE', ( 9.224429976137313900, -10.00000000000000000, -27.51813413536965700 ) ) ; +#4875 = CARTESIAN_POINT ( 'NONE', ( 3.344071876781113100, -20.14663973264066100, -16.70267791651484800 ) ) ; +#4876 = AXIS2_PLACEMENT_3D ( 'NONE', #7264, #642, #8418 ) ; +#4877 = CARTESIAN_POINT ( 'NONE', ( 3.133919645120570000, -30.12329192787899900, 22.64837010811494300 ) ) ; +#4878 = CARTESIAN_POINT ( 'NONE', ( 31.06646974664699800, -30.52905104376499800, 27.13193576809304000 ) ) ; +#4879 = CARTESIAN_POINT ( 'NONE', ( 3.768681612491286100, -18.64134389808155500, -18.67482098596454800 ) ) ; +#4880 = CARTESIAN_POINT ( 'NONE', ( 7.517576847923204600, -30.02574773946539800, 26.40056125367159400 ) ) ; +#4881 = CARTESIAN_POINT ( 'NONE', ( 36.75407342078671000, -29.11693196896926100, 22.17372143739320100 ) ) ; +#4882 = ORIENTED_EDGE ( 'NONE', *, *, #10820, .T. ) ; +#4883 = EDGE_CURVE ( 'NONE', #13700, #2183, #9922, .T. ) ; +#4884 = CARTESIAN_POINT ( 'NONE', ( 4.222893149720904100, -29.92036856101807600, 24.09432677294053000 ) ) ; +#4885 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4886 = CARTESIAN_POINT ( 'NONE', ( 17.56239438818705500, -31.29661376537658800, 28.74483239543690200 ) ) ; +#4887 = CARTESIAN_POINT ( 'NONE', ( 26.54332074876220600, -21.14100674335631400, -26.49542273004619700 ) ) ; +#4888 = CARTESIAN_POINT ( 'NONE', ( 3.501930388451819400, -28.88147467511076600, 21.70898095495164900 ) ) ; +#4889 = ORIENTED_EDGE ( 'NONE', *, *, #4719, .T. ) ; +#4890 = CARTESIAN_POINT ( 'NONE', ( 25.43134686332392700, -20.81196804898937800, -24.05326902463212900 ) ) ; +#4891 = CARTESIAN_POINT ( 'NONE', ( 36.35857206321808400, -18.96630291047169700, 14.48776020901842700 ) ) ; +#4892 = CARTESIAN_POINT ( 'NONE', ( 24.74853792155864300, -12.50000000000000200, 8.691762409182656400 ) ) ; +#4893 = CARTESIAN_POINT ( 'NONE', ( 33.11239861896613900, -30.38446400618016300, 26.10904888462878000 ) ) ; +#4894 = CARTESIAN_POINT ( 'NONE', ( 3.131482770746995700, -29.39978470367259800, 10.84315608312513000 ) ) ; +#4895 = ORIENTED_EDGE ( 'NONE', *, *, #8178, .T. ) ; +#4896 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076456000, -30.82654731345000700, 27.93780948130459400 ) ) ; +#4897 = CARTESIAN_POINT ( 'NONE', ( 39.97167428080927500, 9.894175532731914300, 18.88869844314350700 ) ) ; +#4898 = CARTESIAN_POINT ( 'NONE', ( 26.54841514983740000, -20.85320930698269500, -23.75599575574597500 ) ) ; +#4899 = LINE ( 'NONE', #10867, #4751 ) ; +#4900 = CARTESIAN_POINT ( 'NONE', ( 31.14239509534377200, -30.27490384121830000, 27.08931960862057100 ) ) ; +#4901 = CARTESIAN_POINT ( 'NONE', ( 7.537574157781112800, -99.99999999999998600, -33.33891646864277200 ) ) ; +#4902 = ORIENTED_EDGE ( 'NONE', *, *, #3877, .T. ) ; +#4903 = EDGE_CURVE ( 'NONE', #9893, #12759, #10809, .T. ) ; +#4904 = CARTESIAN_POINT ( 'NONE', ( 30.79233168273184200, -19.81019838552893800, 20.73115074200032400 ) ) ; +#4905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4906 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4907 = CARTESIAN_POINT ( 'NONE', ( 9.637505870970425500, -30.96327563495881900, 27.33842354285648600 ) ) ; +#4908 = CARTESIAN_POINT ( 'NONE', ( 35.60670492997169100, -30.35377049646234600, 24.23421002182328000 ) ) ; +#4909 = ORIENTED_EDGE ( 'NONE', *, *, #4652, .F. ) ; +#4910 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.723972447247824400, -15.80114926534604100 ) ) ; +#4911 = CARTESIAN_POINT ( 'NONE', ( 35.19516453412976600, -97.43736317398497700, 18.98107255786915100 ) ) ; +#4912 = TOROIDAL_SURFACE ( 'NONE', #7219, 2.500000000000000000, 2.500000000000000000 ) ; +#4913 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999988000, -26.59114142712069300, 7.569598271659378600 ) ) ; +#4914 = CARTESIAN_POINT ( 'NONE', ( 33.67480709470761700, -7.657894180035437000, 25.00000000000000000 ) ) ; +#4915 = CARTESIAN_POINT ( 'NONE', ( 6.250095354329528300, -29.56327558314396200, 25.44989973208327800 ) ) ; +#4916 = CARTESIAN_POINT ( 'NONE', ( 39.99998668302203000, -9.999999999999575500, 7.888776376373404500 ) ) ; +#4917 = CARTESIAN_POINT ( 'NONE', ( 9.824566582759617400, -12.50000000000019900, 19.43900198342492700 ) ) ; +#4918 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.500000000000000000, 20.00000000000000000 ) ) ; +#4919 = CARTESIAN_POINT ( 'NONE', ( 0.4734262625552290700, -11.89363965156214700, 8.020047235982234600 ) ) ; +#4920 = FACE_OUTER_BOUND ( 'NONE', #6833, .T. ) ; +#4921 = EDGE_CURVE ( 'NONE', #2778, #9095, #12496, .T. ) ; +#4922 = EDGE_LOOP ( 'NONE', ( #3727, #3836, #3897, #3925 ) ) ; +#4923 = CARTESIAN_POINT ( 'NONE', ( 31.06094939492447100, -30.91893170270350000, 27.05059105369680900 ) ) ; +#4924 = LINE ( 'NONE', #10589, #5489 ) ; +#4925 = CARTESIAN_POINT ( 'NONE', ( 7.872693623522570400, -30.94232311127172300, 26.49812186031886100 ) ) ; +#4926 = CARTESIAN_POINT ( 'NONE', ( 37.05658387864419700, -30.27204144665250900, 21.96082554713316500 ) ) ; +#4927 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, -40.86942826376123600 ) ) ; +#4928 = ORIENTED_EDGE ( 'NONE', *, *, #5156, .F. ) ; +#4929 = CARTESIAN_POINT ( 'NONE', ( 4.745676372370379400, -31.01082862533182200, 23.62553129747205500 ) ) ; +#4930 = CARTESIAN_POINT ( 'NONE', ( 40.00000002490161700, -10.00000000622538600, -11.53324907984487300 ) ) ; +#4931 = CARTESIAN_POINT ( 'NONE', ( 39.48871891668687100, -11.06322973840918400, -14.55256349805586400 ) ) ; +#4932 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -22.03500000000001400, 7.646505608887533600 ) ) ; +#4933 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #5043, #12887 ), + ( #8454, #1771 ), + ( #9576, #2872 ), + ( #10707, #3985 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.9897976715604743800, 0.9897976715604743800), + ( 0.9897976715604743800, 0.9897976715604743800), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4934 = CIRCLE ( 'NONE', #11098, 10.00000000000000000 ) ; +#4935 = CARTESIAN_POINT ( 'NONE', ( 2.981330782400150800E-009, -10.00000000000000000, -11.53278959704667600 ) ) ; +#4936 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.46243069294108000, -27.19746277637472100 ) ) ; +#4937 = ADVANCED_FACE ( 'NONE', ( #6352 ), #11832, .T. ) ; +#4938 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 6.938893903907228400E-016 ) ) ; +#4939 = ORIENTED_EDGE ( 'NONE', *, *, #11210, .T. ) ; +#4940 = AXIS2_PLACEMENT_3D ( 'NONE', #5804, #13611, #6926 ) ; +#4941 = CARTESIAN_POINT ( 'NONE', ( 24.36503156385121500, -12.50000000000035000, -22.80133487554965300 ) ) ; +#4942 = CARTESIAN_POINT ( 'NONE', ( 37.47322147315759400, -27.83174359021458200, 11.77855052488388000 ) ) ; +#4943 = CARTESIAN_POINT ( 'NONE', ( 34.04265212515575500, -23.16470988872880500, 12.33369282567945600 ) ) ; +#4944 = CARTESIAN_POINT ( 'NONE', ( 33.00614772440080500, -31.11807438035404200, 25.81423818726666000 ) ) ; +#4945 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -27.09143239524033600, 6.754920151478379400 ) ) ; +#4946 = ORIENTED_EDGE ( 'NONE', *, *, #2855, .F. ) ; +#4947 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001400, 27.93780948130459400 ) ) ; +#4948 = CARTESIAN_POINT ( 'NONE', ( 31.76046753788123300, -22.20895815648971400, -23.94549252489698800 ) ) ; +#4949 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -93.58406699862018700, 0.4683665082785550800 ) ) ; +#4950 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4951 = EDGE_CURVE ( 'NONE', #5584, #7883, #11184, .T. ) ; +#4952 = FACE_OUTER_BOUND ( 'NONE', #8292, .T. ) ; +#4953 = CARTESIAN_POINT ( 'NONE', ( 33.31960650376057500, -29.67883621464296700, 25.78770199040312100 ) ) ; +#4954 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -99.99999999999998600, -38.36942826376122900 ) ) ; +#4955 = CARTESIAN_POINT ( 'NONE', ( 29.52618892049377300, -19.45394027353897600, 21.57711909313351100 ) ) ; +#4956 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4957 = CARTESIAN_POINT ( 'NONE', ( 35.04753174462119600, -20.52763508791160900, 16.30423095911679000 ) ) ; +#4958 = CARTESIAN_POINT ( 'NONE', ( 9.630441494322679900, -30.69074056159576000, 27.40503870320257800 ) ) ; +#4959 = CARTESIAN_POINT ( 'NONE', ( 35.14955183564493500, -29.20224631995335300, 24.07155156247608800 ) ) ; +#4960 = ORIENTED_EDGE ( 'NONE', *, *, #5642, .T. ) ; +#4961 = AXIS2_PLACEMENT_3D ( 'NONE', #1266, #9063, #6786 ) ; +#4962 = CARTESIAN_POINT ( 'NONE', ( 35.12288631598102700, -95.07596123493894400, 10.90036813677054200 ) ) ; +#4963 = CARTESIAN_POINT ( 'NONE', ( 27.70062793806472400, -94.74252659015718300, 18.14366083036349400 ) ) ; +#4964 = CARTESIAN_POINT ( 'NONE', ( 27.51694852172849100, -11.71136266906808900, 24.56905168643037700 ) ) ; +#4965 = CARTESIAN_POINT ( 'NONE', ( 6.190187399596731600, -21.16851096713278900, 17.84516541697157900 ) ) ; +#4966 = CARTESIAN_POINT ( 'NONE', ( 30.37849651014823500, -9.957654299112579800, 25.00000000000000000 ) ) ; +#4967 = CARTESIAN_POINT ( 'NONE', ( 6.159716688122985700, -30.58637709369639200, 25.57944765938020700 ) ) ; +#4968 = CARTESIAN_POINT ( 'NONE', ( 41.95192316919575900, -10.00000000000000000, 8.022742114712064800 ) ) ; +#4969 = CARTESIAN_POINT ( 'NONE', ( 16.37881830567436100, -12.49999999999999800, 9.869605044009890800 ) ) ; +#4970 = CARTESIAN_POINT ( 'NONE', ( 38.25831621698679900, -11.87147229759086500, -18.15275939897246000 ) ) ; +#4971 = CARTESIAN_POINT ( 'NONE', ( 39.97167428080927500, 9.894175532731914300, 1.388698443143500100 ) ) ; +#4972 = EDGE_CURVE ( 'NONE', #10101, #9541, #6128, .T. ) ; +#4973 = CARTESIAN_POINT ( 'NONE', ( -1.945319102943381000, -9.999999999999996400, 8.516660627677005400 ) ) ; +#4974 = ORIENTED_EDGE ( 'NONE', *, *, #12678, .T. ) ; +#4975 = CARTESIAN_POINT ( 'NONE', ( 30.95716677334814900, -30.38477233557724900, 27.17800757786103100 ) ) ; +#4976 = CARTESIAN_POINT ( 'NONE', ( 13.56969241611736100, -20.03731109949142900, 22.70485303044903300 ) ) ; +#4977 = CARTESIAN_POINT ( 'NONE', ( 7.857054421938517700, -30.36411509582745100, 26.62965852523029400 ) ) ; +#4978 = CARTESIAN_POINT ( 'NONE', ( 36.31147050479545200, -28.94676998944040500, 22.32175904028983400 ) ) ; +#4979 = CARTESIAN_POINT ( 'NONE', ( -2.640157416518337900E-015, -7.502326567933289800, 20.44097942381810300 ) ) ; +#4980 = AXIS2_PLACEMENT_3D ( 'NONE', #8022, #1363, #9152 ) ; +#4981 = CARTESIAN_POINT ( 'NONE', ( 4.273921706147052500, -30.20903236480357300, 24.16907777177357600 ) ) ; +#4982 = CARTESIAN_POINT ( 'NONE', ( 16.17128944194896100, -33.40998945198109700, 28.48788683011559500 ) ) ; +#4983 = CARTESIAN_POINT ( 'NONE', ( 37.50750293030211000, -95.07596123493894400, -4.496020763364954000 ) ) ; +#4984 = CARTESIAN_POINT ( 'NONE', ( 39.62823873527057800, -11.22080122623109800, 10.62674840657864900 ) ) ; +#4985 = CARTESIAN_POINT ( 'NONE', ( 34.58955302715498400, -22.03500000000001400, 10.90852496169998500 ) ) ; +#4986 = CARTESIAN_POINT ( 'NONE', ( 29.55502153732312100, -30.80693058143853600, 27.68278957675607200 ) ) ; +#4987 = CARTESIAN_POINT ( 'NONE', ( 35.76222343527890500, -97.40649683660852500, 18.65167288107132000 ) ) ; +#4988 = CARTESIAN_POINT ( 'NONE', ( 30.69264082599105900, -11.99261116098797500, -24.99999999999999600 ) ) ; +#4989 = CARTESIAN_POINT ( 'NONE', ( 22.53596262505266200, -27.96616263879856100, 27.45684688369695400 ) ) ; +#4990 = CARTESIAN_POINT ( 'NONE', ( 22.66729725430873200, -12.49999999999998600, -14.54564276259785200 ) ) ; +#4991 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -97.57596123493894400, 0.0000000000000000000 ) ) ; +#4992 = CARTESIAN_POINT ( 'NONE', ( 34.78701975080174700, -12.50000000000087800, 12.26022135976073300 ) ) ; +#4993 = EDGE_CURVE ( 'NONE', #2183, #9893, #5990, .T. ) ; +#4994 = CARTESIAN_POINT ( 'NONE', ( 32.97978732366477300, -30.11709361308368600, 26.15248361726834500 ) ) ; +#4995 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -21.31329447008922500, -12.75229921897734900 ) ) ; +#4996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4997 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4998 = TOROIDAL_SURFACE ( 'NONE', #5026, 2.500000000000000000, 2.500000000000000000 ) ; +#4999 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -7.520606794341281500, 25.00000000000000000 ) ) ; +#5000 = CARTESIAN_POINT ( 'NONE', ( 35.19721566319325500, -29.19066420022864600, 24.01473758677883900 ) ) ; +#5001 = DIRECTION ( 'NONE', ( -1.000000000000000000, 1.186620743767935600E-016, -6.729660650912597500E-016 ) ) ; +#5002 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6107, #660, #8438 ), + ( #1753, #9562, #2853 ), + ( #10691, #3969, #11806 ), + ( #5079, #12918, #6212 ), + ( #14017, #7338, #709 ), + ( #8490, #1807, #9616 ), + ( #2910, #10750, #4020 ), + ( #11859, #5134, #12971 ), + ( #6259, #14071, #7399 ), + ( #761, #8543, #1865 ), + ( #9672, #2964, #10807 ), + ( #4076, #11913, #5188 ), + ( #13028, #6315, #14127 ), + ( #7456, #818, #8602 ), + ( #1913, #9729, #3018 ), + ( #10864, #4130, #11968 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 3.469446951953614200E-018, 0.002226100544389967100, 0.004452201088779930700, 0.005565251360974912500, 0.006678301633169894300, 0.008904402177559857900, 0.01335660326633978500, 0.01780880435511971200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865473500, 1.000000000000000000), + ( 1.000000000000000000, 0.7244825415844807800, 1.000000000000000000), + ( 1.000000000000000000, 0.7419772105788081700, 1.000000000000000000), + ( 1.000000000000000000, 0.7769715623868430600, 1.000000000000000000), + ( 1.000000000000000000, 0.7944760416282036200, 1.000000000000000000), + ( 1.000000000000000000, 0.8203989626029449800, 1.000000000000000000), + ( 1.000000000000000000, 0.8289841048678933100, 1.000000000000000000), + ( 1.000000000000000000, 0.8457553974923987000, 1.000000000000000000), + ( 1.000000000000000000, 0.8539697634099230300, 1.000000000000000000), + ( 1.000000000000000000, 0.8780002341403944100, 1.000000000000000000), + ( 1.000000000000000000, 0.8932073966714828600, 1.000000000000000000), + ( 1.000000000000000000, 0.9354213354546299100, 1.000000000000000000), + ( 1.000000000000000000, 0.9589939734612618100, 1.000000000000000000), + ( 1.000000000000000000, 0.9913592356950564600, 1.000000000000000000), + ( 1.000000000000000000, 1.000064721039573400, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5003 = CARTESIAN_POINT ( 'NONE', ( 28.19029312067435100, -19.15544264508034200, 22.29219671888505200 ) ) ; +#5004 = VERTEX_POINT ( 'NONE', #5159 ) ; +#5005 = CARTESIAN_POINT ( 'NONE', ( 24.61457340656017900, -94.74682992296713700, 18.71443453778742600 ) ) ; +#5006 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999971100, -19.99921743486444500, -11.50057695905732800 ) ) ; +#5007 = CARTESIAN_POINT ( 'NONE', ( 9.838211988003307000, -30.96217207923201900, 27.41921016360303300 ) ) ; +#5008 = CARTESIAN_POINT ( 'NONE', ( 35.60227923966304100, -30.09569513671222300, 24.31438108206557300 ) ) ; +#5009 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -96.63408478953198300, 6.393891568607717300 ) ) ; +#5010 = CARTESIAN_POINT ( 'NONE', ( 23.72143650460230200, -93.17319105002798100, 22.83432234658792100 ) ) ; +#5011 = ADVANCED_FACE ( 'NONE', ( #5971 ), #9007, .F. ) ; +#5012 = CARTESIAN_POINT ( 'NONE', ( 28.43495608111255600, -10.69556025937173900, 24.87735395956418900 ) ) ; +#5013 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -3.189999999999994200 ) ) ; +#5014 = CARTESIAN_POINT ( 'NONE', ( 6.283843497508249800, -29.71933706935826800, 25.56059188924035300 ) ) ; +#5015 = FACE_OUTER_BOUND ( 'NONE', #1318, .T. ) ; +#5016 = CARTESIAN_POINT ( 'NONE', ( 39.52092803213501100, -11.89302600807213800, 8.452116377545694400 ) ) ; +#5017 = CARTESIAN_POINT ( 'NONE', ( 12.71501475533923100, -24.10352281368597400, 19.04342285688946400 ) ) ; +#5018 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#5019 = EDGE_LOOP ( 'NONE', ( #9284, #6013, #1601, #12444, #11976, #7107, #3544 ) ) ; +#5020 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1517, #8182, #2603, #10429 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#5021 = CARTESIAN_POINT ( 'NONE', ( 0.1329002658378796700, -10.00000000000183000, 10.24232909561126800 ) ) ; +#5022 = CARTESIAN_POINT ( 'NONE', ( 30.97010656370405400, -30.76049514831871400, 27.14144077417066100 ) ) ; +#5023 = CARTESIAN_POINT ( 'NONE', ( 7.211516816226204400, -28.77563345024827900, 26.20285209486210600 ) ) ; +#5024 = CARTESIAN_POINT ( 'NONE', ( 8.089062409411488000, -31.10298542181562100, 26.52575315125425000 ) ) ; +#5025 = CARTESIAN_POINT ( 'NONE', ( 37.29487403485283900, -29.92624546485573600, 22.13229814612675700 ) ) ; +#5026 = AXIS2_PLACEMENT_3D ( 'NONE', #186, #8972, #7924 ) ; +#5027 = CARTESIAN_POINT ( 'NONE', ( 4.744579265724490300, -29.17984781182014600, 23.94931957167864700 ) ) ; +#5028 = CARTESIAN_POINT ( 'NONE', ( 12.43048937110272300, -38.97427732928989000, 18.99721454164326300 ) ) ; +#5029 = CARTESIAN_POINT ( 'NONE', ( 41.90096991803933000, -95.07596123493894400, 0.7602325291598685000 ) ) ; +#5030 = CARTESIAN_POINT ( 'NONE', ( 37.63399613019395000, -10.00577354972706200, 20.10430461088510200 ) ) ; +#5031 = ORIENTED_EDGE ( 'NONE', *, *, #6971, .T. ) ; +#5032 = CARTESIAN_POINT ( 'NONE', ( 32.46242584221887700, -100.0000000000000100, 1.600059941120309400 ) ) ; +#5033 = CARTESIAN_POINT ( 'NONE', ( 29.24855291511222100, -30.72479797221210900, 27.79642993442869400 ) ) ; +#5034 = CARTESIAN_POINT ( 'NONE', ( 29.68256521388328700, -100.0000000000000700, 20.67194166316897600 ) ) ; +#5035 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#5036 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.500000000000000000, 25.00000000000000000 ) ) ; +#5037 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -102.6047226650038800, -26.09731196857810100 ) ) ; +#5038 = EDGE_CURVE ( 'NONE', #659, #13997, #9353, .T. ) ; +#5039 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#5040 = ORIENTED_EDGE ( 'NONE', *, *, #1429, .T. ) ; +#5041 = CARTESIAN_POINT ( 'NONE', ( 24.87957705254441300, -12.50000000000000500, 8.354573530129656000 ) ) ; +#5042 = CARTESIAN_POINT ( 'NONE', ( 32.97978620299937800, -30.88256681065533400, 26.01752435995046800 ) ) ; +#5043 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995100, -29.71061054856840800, 21.60901759478834400 ) ) ; +#5044 = CARTESIAN_POINT ( 'NONE', ( 28.58214990799273300, -9.799282964294347300, -24.99999999999999600 ) ) ; +#5045 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 20.69000000000000100 ) ) ; +#5046 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57596123371020300, 12.92977595461169600 ) ) ; +#5047 = CARTESIAN_POINT ( 'NONE', ( 17.20951515233810600, -12.50000000000002000, -14.53286926538968000 ) ) ; +#5048 = EDGE_LOOP ( 'NONE', ( #2458, #11999, #12263, #1585 ) ) ; +#5049 = AXIS2_PLACEMENT_3D ( 'NONE', #406, #8171, #1505 ) ; +#5050 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #13341, #6688, #7827 ), + ( #1182, #8965, #2265 ), + ( #10092, #3376, #11220 ), + ( #4490, #12326, #5602 ), + ( #13429, #6736, #140 ), + ( #7875, #1224, #9015 ), + ( #2312, #10139, #3424 ), + ( #11267, #4537, #12367 ), + ( #5652, #13472, #6781 ), + ( #183, #7921, #1262 ), + ( #9058, #2361, #10186 ), + ( #3469, #11315, #4582 ), + ( #12413, #5698, #13518 ), + ( #6823, #219, #7969 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.003585109863186502300, 0.005377664794779753200, 0.007170219726373004500, 0.01075532958955950600, 0.01254788452115275900, 0.01434043945274600900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941268098083124100, 1.000000000000000000), + ( 1.000000000000000000, 0.7940570593830833500, 1.000000000000000000), + ( 1.000000000000000000, 0.7939519617335527600, 1.000000000000000000), + ( 1.000000000000000000, 0.7936175834393247600, 1.000000000000000000), + ( 1.000000000000000000, 0.7934813839850058900, 1.000000000000000000), + ( 1.000000000000000000, 0.7931618300843639200, 1.000000000000000000), + ( 1.000000000000000000, 0.7929793145168379000, 1.000000000000000000), + ( 1.000000000000000000, 0.7922959124040285200, 1.000000000000000000), + ( 1.000000000000000000, 0.7917664014436945900, 1.000000000000000000), + ( 1.000000000000000000, 0.7905104243219308600, 1.000000000000000000), + ( 1.000000000000000000, 0.7899879287577550300, 1.000000000000000000), + ( 1.000000000000000000, 0.7886047795576639500, 1.000000000000000000), + ( 1.000000000000000000, 0.7877139102619785700, 1.000000000000000000), + ( 1.000000000000000000, 0.7865485489145656000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5051 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23116646380259100, -11.74895849411024600 ) ) ; +#5052 = CARTESIAN_POINT ( 'NONE', ( 36.00499694468547300, -29.00074017745948800, 22.87255519631088100 ) ) ; +#5053 = CARTESIAN_POINT ( 'NONE', ( 6.420096478074862400, -100.0000000000000000, 19.28210194485756500 ) ) ; +#5054 = CARTESIAN_POINT ( 'NONE', ( 26.24351306274785500, -19.98660733356856400, 22.76577528005914200 ) ) ; +#5055 = VERTEX_POINT ( 'NONE', #3093 ) ; +#5056 = CARTESIAN_POINT ( 'NONE', ( 0.1720427470331578300, -9.999999999995688800, 21.30031871613265800 ) ) ; +#5057 = CARTESIAN_POINT ( 'NONE', ( 2.201246419960296100, -18.80494426513767800, -11.53020102454055600 ) ) ; +#5058 = CARTESIAN_POINT ( 'NONE', ( 9.832856788308619800, -30.76247918143676700, 27.47082787884508500 ) ) ; +#5059 = CARTESIAN_POINT ( 'NONE', ( 35.16834987162676600, -31.01176902110887200, 23.76913960730965400 ) ) ; +#5060 = CARTESIAN_POINT ( 'NONE', ( 7.284744559450885500, -12.50000000000137700, 16.82646202526211700 ) ) ; +#5061 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999997900, -94.33857163534939600, 4.255063462584884000 ) ) ; +#5062 = EDGE_CURVE ( 'NONE', #12759, #5998, #5756, .T. ) ; +#5063 = CARTESIAN_POINT ( 'NONE', ( 2.204175642831924400, -18.81382973802318400, 8.123981740597045600 ) ) ; +#5064 = ORIENTED_EDGE ( 'NONE', *, *, #10714, .F. ) ; +#5065 = CARTESIAN_POINT ( 'NONE', ( 2.499980427072256100, -21.23394483065450400, 7.806962661282661900 ) ) ; +#5066 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -16.29999999999999000 ) ) ; +#5067 = CARTESIAN_POINT ( 'NONE', ( 6.407155592483558600, -30.92313831939299700, 25.55056802101575600 ) ) ; +#5068 = CARTESIAN_POINT ( 'NONE', ( 39.86709762803001000, -10.00000000000229500, 10.24234746889601800 ) ) ; +#5069 = CARTESIAN_POINT ( 'NONE', ( 12.39184568613721600, -12.49999999999969600, 20.97224601701208300 ) ) ; +#5070 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669240300, -0.9848077530122092400 ) ) ; +#5071 = ORIENTED_EDGE ( 'NONE', *, *, #2427, .T. ) ; +#5072 = CIRCLE ( 'NONE', #10926, 2.499999999999998700 ) ; +#5073 = CARTESIAN_POINT ( 'NONE', ( 1.171428536097310700, -11.88724840209015300, 12.91525829487915400 ) ) ; +#5074 = CARTESIAN_POINT ( 'NONE', ( 30.75621403859950900, -30.37529948586897200, 27.26097580130230500 ) ) ; +#5075 = CARTESIAN_POINT ( 'NONE', ( 9.170821223079260100, -27.08702971144589700, 19.47639837657210300 ) ) ; +#5076 = CARTESIAN_POINT ( 'NONE', ( 8.042108293537282300, -30.56560979954083000, 26.71318243350462400 ) ) ; +#5077 = CARTESIAN_POINT ( 'NONE', ( 36.28113959680407400, -30.68491141465876000, 22.01618170080885100 ) ) ; +#5078 = ORIENTED_EDGE ( 'NONE', *, *, #12066, .T. ) ; +#5079 = CARTESIAN_POINT ( 'NONE', ( 4.483106711958472000, -94.86873859399358400, 9.066550904853702500 ) ) ; +#5080 = EDGE_CURVE ( 'NONE', #305, #8982, #5295, .T. ) ; +#5081 = CARTESIAN_POINT ( 'NONE', ( 4.442712230640934100, -30.50508506020347700, 24.16374062361538200 ) ) ; +#5082 = CARTESIAN_POINT ( 'NONE', ( 11.27945100752049400, -31.68901400624675800, 19.83727737291173600 ) ) ; +#5083 = CARTESIAN_POINT ( 'NONE', ( 34.00319929022902000, -95.07596123493894400, 4.623480266341013900 ) ) ; +#5084 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-016, -10.73517756388995000, 9.570443643233511800 ) ) ; +#5085 = VERTEX_POINT ( 'NONE', #7527 ) ; +#5086 = CARTESIAN_POINT ( 'NONE', ( 28.07931111076170400, -22.03500000000001400, 19.04699989332139900 ) ) ; +#5087 = LINE ( 'NONE', #8511, #7 ) ; +#5088 = CARTESIAN_POINT ( 'NONE', ( 29.24729178549938500, -30.79658693447908400, 27.78590352582611800 ) ) ; +#5089 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5090 = ADVANCED_FACE ( 'NONE', ( #5101 ), #4432, .F. ) ; +#5091 = CARTESIAN_POINT ( 'NONE', ( 27.04941352502764200, -30.77347774677197000, 28.36758194924810200 ) ) ; +#5092 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669238900, -0.9848077530122092400 ) ) ; +#5093 = CARTESIAN_POINT ( 'NONE', ( 3.118509148920837900, -30.36150919687809600, 21.49424622637283000 ) ) ; +#5094 = CARTESIAN_POINT ( 'NONE', ( 34.59390020557116000, -22.93871568111612500, 10.71250632364720400 ) ) ; +#5095 = ORIENTED_EDGE ( 'NONE', *, *, #6865, .F. ) ; +#5096 = CARTESIAN_POINT ( 'NONE', ( 32.65097608796818900, -29.91917755882364800, 26.27740835673544200 ) ) ; +#5097 = CARTESIAN_POINT ( 'NONE', ( 29.47223811828406800, -10.73158092995209300, -25.03926009640090200 ) ) ; +#5098 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, 51.02052347080197600, -11.74043533514387100 ) ) ; +#5099 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#5100 = CARTESIAN_POINT ( 'NONE', ( 14.19057953754524900, -20.82472721566641400, -23.96219473850551700 ) ) ; +#5101 = FACE_OUTER_BOUND ( 'NONE', #11567, .T. ) ; +#5102 = EDGE_LOOP ( 'NONE', ( #1351, #5883, #2290, #9388 ) ) ; +#5103 = CIRCLE ( 'NONE', #7115, 3.189999999999994200 ) ; +#5104 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457636700, -30.82655086342985500, 27.93782961424069800 ) ) ; +#5105 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#5106 = CARTESIAN_POINT ( 'NONE', ( 24.77342121794088200, -19.69905935339974700, 23.12254972652015900 ) ) ; +#5107 = CARTESIAN_POINT ( 'NONE', ( 14.77506013719736400, -24.19473661295868500, 19.69271824753818100 ) ) ; +#5108 = ORIENTED_EDGE ( 'NONE', *, *, #5447, .F. ) ; +#5109 = CARTESIAN_POINT ( 'NONE', ( 25.35545110003586100, -19.98019157775812700, 22.96545429798415200 ) ) ; +#5110 = CARTESIAN_POINT ( 'NONE', ( 9.837932183801321200, -30.52798305382650300, 27.49660382818145600 ) ) ; +#5111 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4182, #10033, #11169, #4443, #12270, #5546, #13377, #6682, #85, #7822, #1176, #8960, #2260, #10088, #3369, #11215 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 1, 2, 2, 4 ), + ( 0.1951557583586107400, 0.2957612885637842000, 0.3963668187689576800, 0.4969723489741313400, 0.5472751140767180300, 0.5975778791793046100, 0.6981834093844784300, 0.7987889395896521400, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#5112 = CARTESIAN_POINT ( 'NONE', ( 35.34825858323391400, -29.79962692719182400, 24.44732095899378200 ) ) ; +#5113 = CARTESIAN_POINT ( 'NONE', ( 15.75457697851076400, -12.50000000000003400, 9.409393369542488700 ) ) ; +#5114 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000001400, -90.67527717990331800, -2.935316354330159200 ) ) ; +#5115 = CARTESIAN_POINT ( 'NONE', ( 4.817977492073176800, -19.01638921127781900, 16.54847188199782000 ) ) ; +#5116 = CARTESIAN_POINT ( 'NONE', ( 2.198136918426044900, -18.79471577021215400, 7.917832907130670800 ) ) ; +#5117 = CARTESIAN_POINT ( 'NONE', ( 39.50323832265538500, -11.89236483250614300, 8.925143882384858800 ) ) ; +#5118 = CARTESIAN_POINT ( 'NONE', ( 6.363534018402795300, -30.11389614464352200, 25.75590745281754200 ) ) ; +#5119 = CARTESIAN_POINT ( 'NONE', ( 3.358525124106484400, -10.00000000000193800, 24.72287626683256800 ) ) ; +#5120 = CARTESIAN_POINT ( 'NONE', ( 41.15568613862709700, -9.999999999999996400, 13.59580845614522600 ) ) ; +#5121 = CARTESIAN_POINT ( 'NONE', ( 16.16099757404040100, -18.86117455245534200, 23.43753584565557100 ) ) ; +#5122 = CARTESIAN_POINT ( 'NONE', ( 16.77075194799257900, -12.50000000000000400, 10.02952377512878000 ) ) ; +#5123 = CARTESIAN_POINT ( 'NONE', ( 33.27592583569993700, -12.39567708210691800, -23.82579546795007300 ) ) ; +#5124 = ORIENTED_EDGE ( 'NONE', *, *, #8431, .T. ) ; +#5125 = CARTESIAN_POINT ( 'NONE', ( 3.286723292014006100, -21.63384857040926000, -16.71351422664227100 ) ) ; +#5126 = CARTESIAN_POINT ( 'NONE', ( 2.493839588829545500, -10.00000000000000400, 20.58321131465857300 ) ) ; +#5127 = CARTESIAN_POINT ( 'NONE', ( 30.77169132767474100, -30.69024259847707700, 27.24156962461563900 ) ) ; +#5128 = CARTESIAN_POINT ( 'NONE', ( 6.517919602518185600, -21.06165040061733500, 18.20209392235959800 ) ) ; +#5129 = CARTESIAN_POINT ( 'NONE', ( 8.091426877423529600, -30.06919857992508200, 26.70337670843537500 ) ) ; +#5130 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #999, #2089, #9914 ), + ( #3200, #11041, #4316 ), + ( #12150, #5415, #1825 ), + ( #4035, #10658, #3939 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -3.616898447411642800E-015, 0.0001256340864440230700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941643989882858400, 1.000000000000000000), + ( 1.000000000000000000, 0.7941643989240018100, 1.000000000000000000), + ( 1.000000000000000000, 0.7941588266965196000, 1.000000000000000000), + ( 1.000000000000000000, 0.7941476793044257600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5131 = CARTESIAN_POINT ( 'NONE', ( 37.03690979070010800, -29.63478833214066600, 22.50478096071524800 ) ) ; +#5132 = VERTEX_POINT ( 'NONE', #928 ) ; +#5133 = EDGE_CURVE ( 'NONE', #7419, #5747, #9727, .T. ) ; +#5134 = CARTESIAN_POINT ( 'NONE', ( 2.499999999998469200, -94.90629810833830500, 6.281968897872707700 ) ) ; +#5135 = CARTESIAN_POINT ( 'NONE', ( 4.679961199504426800, -29.40707304179118300, 24.14894102746430700 ) ) ; +#5136 = CARTESIAN_POINT ( 'NONE', ( 4.956266962178251100, -31.37695392414153900, 23.67498231718502300 ) ) ; +#5137 = CARTESIAN_POINT ( 'NONE', ( 30.05833445423873900, -89.32382647199115400, 8.976239578195199800 ) ) ; +#5138 = CARTESIAN_POINT ( 'NONE', ( 6.505213034913025600E-016, -10.10408104214673500, 13.29488059762637200 ) ) ; +#5139 = ORIENTED_EDGE ( 'NONE', *, *, #9334, .F. ) ; +#5140 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000008200, -100.0000000000000100, 6.630571736238759500 ) ) ; +#5141 = CARTESIAN_POINT ( 'NONE', ( 29.24854979741856900, -30.87370228419474600, 27.77018016181415300 ) ) ; +#5142 = CARTESIAN_POINT ( 'NONE', ( 29.05782688726584000, -99.99999999999998600, 20.83750470493912500 ) ) ; +#5143 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#5144 = CARTESIAN_POINT ( 'NONE', ( 39.59198988496843400, -11.63204046012619300, 8.723003450060053500 ) ) ; +#5145 = CARTESIAN_POINT ( 'NONE', ( 36.24607508404015700, -30.70291383490279500, 22.09186228659120500 ) ) ; +#5146 = CARTESIAN_POINT ( 'NONE', ( 2.815240498423150900, -29.24093927760328200, 21.69183228342207300 ) ) ; +#5147 = CYLINDRICAL_SURFACE ( 'NONE', #11116, 3.189999999999995100 ) ; +#5148 = CARTESIAN_POINT ( 'NONE', ( 5.781484463966917200, -20.28809933266904900, -16.03291062926092900 ) ) ; +#5149 = CARTESIAN_POINT ( 'NONE', ( 35.10061135398424900, -12.50000000000048300, 10.09778041319737900 ) ) ; +#5150 = CARTESIAN_POINT ( 'NONE', ( 32.73354626727697100, -30.64493461289309200, 26.28678116220401500 ) ) ; +#5151 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999987600, -21.31474419950072300, -12.77001026380855300 ) ) ; +#5152 = CARTESIAN_POINT ( 'NONE', ( 30.14216577424085500, -11.37367492607456600, -24.99999999999940000 ) ) ; +#5153 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -17.49999999999999600 ) ) ; +#5154 = CARTESIAN_POINT ( 'NONE', ( 13.48767775287197600, -12.49999999999998600, -22.28016022888385100 ) ) ; +#5155 = EDGE_LOOP ( 'NONE', ( #1312, #1812, #7562, #1976, #2167, #3021 ) ) ; +#5156 = EDGE_CURVE ( 'NONE', #1408, #5998, #4573, .T. ) ; +#5157 = CARTESIAN_POINT ( 'NONE', ( 11.29468244778342800, -9.357860782073910100, 25.00000000000000400 ) ) ; +#5158 = CARTESIAN_POINT ( 'NONE', ( 7.682736712775144900, -10.84382735996141800, -25.00000000000000000 ) ) ; +#5159 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000000, 1.200000000000005700 ) ) ; +#5160 = CARTESIAN_POINT ( 'NONE', ( 23.27365897479974800, -19.43697375853625100, 23.33470917524820000 ) ) ; +#5161 = CARTESIAN_POINT ( 'NONE', ( 15.15660725784661800, -12.50000000000006800, 21.83879651395414700 ) ) ; +#5162 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -95.45536034008135600, 3.667068596446606800 ) ) ; +#5163 = CARTESIAN_POINT ( 'NONE', ( 0.07775222879382649700, 10.13028869250944000, -18.21135650822972400 ) ) ; +#5164 = CARTESIAN_POINT ( 'NONE', ( 10.24009275106264600, -30.83135117951327300, 27.60612338731027300 ) ) ; +#5165 = CARTESIAN_POINT ( 'NONE', ( 35.23031724507173800, -30.79165252274985000, 24.16278181184923200 ) ) ; +#5166 = CARTESIAN_POINT ( 'NONE', ( 9.473385299851953400, -23.82953566179973500, 17.08995154117034000 ) ) ; +#5167 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5168 = CARTESIAN_POINT ( 'NONE', ( 14.43249723934777700, -19.18209845188434300, 23.10094441293770400 ) ) ; +#5169 = ADVANCED_FACE ( 'NONE', ( #4746 ), #3725, .T. ) ; +#5170 = EDGE_LOOP ( 'NONE', ( #7006, #3501, #11828, #5108, #4334, #618 ) ) ; +#5171 = CARTESIAN_POINT ( 'NONE', ( 2.397694194399109200, -19.58659415901937400, 7.957911263087575900 ) ) ; +#5172 = CARTESIAN_POINT ( 'NONE', ( 35.04123817205940100, -11.88046315875229000, 19.72864673656659200 ) ) ; +#5173 = CARTESIAN_POINT ( 'NONE', ( 6.573696824401770800, -31.15124008065727800, 25.45953121585201400 ) ) ; +#5174 = CARTESIAN_POINT ( 'NONE', ( 4.363443701955217700, -9.891006360258375100, 24.98401397549093500 ) ) ; +#5175 = CARTESIAN_POINT ( 'NONE', ( 35.62702093311324300, -11.88101996013111800, 19.04930477877993400 ) ) ; +#5176 = CARTESIAN_POINT ( 'NONE', ( 28.77023029672657000, -31.29892962639879200, 27.84395469516072600 ) ) ; +#5177 = CARTESIAN_POINT ( 'NONE', ( 39.89844352435918000, -10.40622590256325900, 11.20970963761234500 ) ) ; +#5178 = EDGE_CURVE ( 'NONE', #2637, #7258, #9865, .T. ) ; +#5179 = CARTESIAN_POINT ( 'NONE', ( 5.429185580350880600, -20.25367321511081900, -20.63505663702364900 ) ) ; +#5180 = CARTESIAN_POINT ( 'NONE', ( 6.710596699759752100, -9.999999999998628700, 22.00420119753881200 ) ) ; +#5181 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141808200, -28.87043262030299900, 21.75755471858354500 ) ) ; +#5182 = CARTESIAN_POINT ( 'NONE', ( 30.75625694679899900, -31.01860151419794700, 27.14764697570803200 ) ) ; +#5183 = CARTESIAN_POINT ( 'NONE', ( 2.758428147136475800, -28.62632739756653100, 17.93744835360696400 ) ) ; +#5184 = CARTESIAN_POINT ( 'NONE', ( 8.338032179416503100, -30.71202742164151900, 26.82961348815135900 ) ) ; +#5185 = CARTESIAN_POINT ( 'NONE', ( 36.22408655309597900, -30.71745043525848800, 22.31235043326630700 ) ) ; +#5186 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#5187 = FACE_OUTER_BOUND ( 'NONE', #4740, .T. ) ; +#5188 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -94.39237608411653500, 1.716882203205452300 ) ) ; +#5189 = ORIENTED_EDGE ( 'NONE', *, *, #3640, .T. ) ; +#5190 = CARTESIAN_POINT ( 'NONE', ( 4.698066770706541100, -30.86722456655837700, 23.91251626320344300 ) ) ; +#5191 = CARTESIAN_POINT ( 'NONE', ( 5.263906971949753100, -35.53526422174754600, 14.09039230291014600 ) ) ; +#5192 = CARTESIAN_POINT ( 'NONE', ( 23.81686621966027300, -95.07596123493894400, 15.95758058754210400 ) ) ; +#5193 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.675012552866274300, 18.20722334853848800 ) ) ; +#5194 = CARTESIAN_POINT ( 'NONE', ( 29.14477743322078900, -30.78579748659688400, 27.82041171274965700 ) ) ; +#5195 = CARTESIAN_POINT ( 'NONE', ( 37.79969759229023700, -18.78242157239148500, -12.74047273683901900 ) ) ; +#5196 = CARTESIAN_POINT ( 'NONE', ( 26.84752224756303100, -28.08124121815345100, 26.96588792518212000 ) ) ; +#5197 = CARTESIAN_POINT ( 'NONE', ( 39.52776454077040600, -11.88894183691834900, 8.005331014627273600 ) ) ; +#5198 = CARTESIAN_POINT ( 'NONE', ( 35.74254275624854000, -30.89751630414384600, 22.97166529238867800 ) ) ; +#5199 = CARTESIAN_POINT ( 'NONE', ( 3.529067248317042900, -30.55409751748808100, 21.52806356282412600 ) ) ; +#5200 = FACE_OUTER_BOUND ( 'NONE', #7144, .T. ) ; +#5201 = CARTESIAN_POINT ( 'NONE', ( 8.330606680480363100, -100.0000000000000300, -34.30055536053080100 ) ) ; +#5202 = CARTESIAN_POINT ( 'NONE', ( 25.00000000385121600, -12.50000000000000500, 7.648264678717271000 ) ) ; +#5203 = EDGE_CURVE ( 'NONE', #1408, #6306, #2537, .T. ) ; +#5204 = CARTESIAN_POINT ( 'NONE', ( 32.45933885280499000, -29.91697177594357300, 26.38007753991557900 ) ) ; +#5205 = EDGE_LOOP ( 'NONE', ( #10950, #11529, #14307, #8976 ) ) ; +#5206 = CARTESIAN_POINT ( 'NONE', ( 30.85185964546023400, -12.52367734734938200, -24.99999999999999600 ) ) ; +#5207 = CARTESIAN_POINT ( 'NONE', ( 7.576339839610402500, -10.31060538292952000, 23.51890351682055100 ) ) ; +#5208 = CARTESIAN_POINT ( 'NONE', ( 36.64147487587555900, -7.500000000000000000, 24.72287626683881400 ) ) ; +#5209 = CARTESIAN_POINT ( 'NONE', ( 16.45500686837047500, -12.50000000000000000, -14.31418114384091900 ) ) ; +#5210 = CARTESIAN_POINT ( 'NONE', ( 3.230084519903793500, -89.80234706481415700, 0.4972597976211746200 ) ) ; +#5211 = CARTESIAN_POINT ( 'NONE', ( 13.81042725341416000, -14.34374382543250100, 24.23408076628494700 ) ) ; +#5212 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.57596123493894400, 11.50239124669685800 ) ) ; +#5213 = CARTESIAN_POINT ( 'NONE', ( 15.52474863080621000, -89.21338468287758900, 10.93317457922470300 ) ) ; +#5214 = CARTESIAN_POINT ( 'NONE', ( 17.41614374891136700, -12.50000000000000900, 10.14164662728800400 ) ) ; +#5215 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 1.200000000000005700 ) ) ; +#5216 = CARTESIAN_POINT ( 'NONE', ( 13.62324996247970300, -14.46566888762679800, -25.78741791179891900 ) ) ; +#5217 = CARTESIAN_POINT ( 'NONE', ( 10.24027680446562600, -30.67091637823760300, 27.63243506596811700 ) ) ; +#5218 = CARTESIAN_POINT ( 'NONE', ( 34.98624777334480700, -29.41804585561502700, 24.44130099318733300 ) ) ; +#5219 = CARTESIAN_POINT ( 'NONE', ( 8.776524506159582000, -12.50000000000023600, 18.53493912133521300 ) ) ; +#5220 = ORIENTED_EDGE ( 'NONE', *, *, #8858, .T. ) ; +#5221 = CARTESIAN_POINT ( 'NONE', ( 16.25934779302313500, -19.90880063686401500, 23.24451445927205700 ) ) ; +#5222 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5223 = CARTESIAN_POINT ( 'NONE', ( 2.499487172817390400, -20.40194019102134200, 7.965430379870998200 ) ) ; +#5224 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -16.29999999999999000 ) ) ; +#5225 = CARTESIAN_POINT ( 'NONE', ( 6.423520396537862900, -30.38480987027566700, 25.81389379127059400 ) ) ; +#5226 = CARTESIAN_POINT ( 'NONE', ( 8.131516293641283300E-017, -9.999999999999998200, -19.74219049453682800 ) ) ; +#5227 = ORIENTED_EDGE ( 'NONE', *, *, #1992, .F. ) ; +#5228 = CARTESIAN_POINT ( 'NONE', ( 33.28940113584105400, -10.00000000000138400, 22.00420257724088600 ) ) ; +#5229 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -39.52045731841471400, 19.79474689191102500 ) ) ; +#5230 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -31.29892962639879200, 28.74442404665511600 ) ) ; +#5231 = CARTESIAN_POINT ( 'NONE', ( 16.66691576264561200, -99.99999999999995700, 6.630571736238765700 ) ) ; +#5232 = CARTESIAN_POINT ( 'NONE', ( 7.448480415098067900, -18.52412593414580800, -23.52097225051048600 ) ) ; +#5233 = CARTESIAN_POINT ( 'NONE', ( 10.96099977948574100, -11.87754789197195000, 23.99238180930177600 ) ) ; +#5234 = ORIENTED_EDGE ( 'NONE', *, *, #7165, .T. ) ; +#5235 = CARTESIAN_POINT ( 'NONE', ( 30.66997593074228600, -30.61257586211849400, 27.29341871964424000 ) ) ; +#5236 = CARTESIAN_POINT ( 'NONE', ( 3.211906953318723900, -26.26864060678510500, 11.72441019050058800 ) ) ; +#5237 = CARTESIAN_POINT ( 'NONE', ( 8.369593209504142100, -30.18131845084747100, 26.85682176205151000 ) ) ; +#5238 = CARTESIAN_POINT ( 'NONE', ( 36.50130442374363300, -29.27512733029932000, 22.77844031546050000 ) ) ; +#5239 = AXIS2_PLACEMENT_3D ( 'NONE', #1137, #8923, #2224 ) ; +#5240 = ORIENTED_EDGE ( 'NONE', *, *, #4581, .F. ) ; +#5241 = CARTESIAN_POINT ( 'NONE', ( 4.462241197383129100, -29.84214141715294800, 24.30177948352706400 ) ) ; +#5242 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -7.395277334996141100, 10.22788370481686300 ) ) ; +#5243 = CARTESIAN_POINT ( 'NONE', ( 29.14545315871077900, -30.85150538907559100, 27.80811504144721600 ) ) ; +#5244 = CARTESIAN_POINT ( 'NONE', ( 36.64268518852809100, -20.13991198539139300, -16.66169090960668300 ) ) ; +#5245 = ADVANCED_FACE ( 'NONE', ( #3713 ), #13237, .F. ) ; +#5246 = CARTESIAN_POINT ( 'NONE', ( 8.632536697985237600, -99.99999999999998600, 20.16526913155304600 ) ) ; +#5247 = VERTEX_POINT ( 'NONE', #12174 ) ; +#5248 = CARTESIAN_POINT ( 'NONE', ( 34.65677507035574900, -31.10128567997960000, 24.30085816686813900 ) ) ; +#5249 = EDGE_CURVE ( 'NONE', #6192, #314, #3560, .T. ) ; +#5250 = CARTESIAN_POINT ( 'NONE', ( 2.515620139147423100, -29.60562898798405500, 21.69598359219622800 ) ) ; +#5251 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Handle', ( #6981, #263 ), #428 ) ; +#5252 = CARTESIAN_POINT ( 'NONE', ( 13.42391054053097400, -20.28809933266904900, -23.64700740566330600 ) ) ; +#5253 = CARTESIAN_POINT ( 'NONE', ( 32.54304289633761000, -30.50615119410199200, 26.42081400162150100 ) ) ; +#5254 = EDGE_LOOP ( 'NONE', ( #8167, #11649, #8020, #10661 ) ) ; +#5255 = CARTESIAN_POINT ( 'NONE', ( 11.47703178651276600, -10.47423724657677200, 24.99999999999883100 ) ) ; +#5256 = CARTESIAN_POINT ( 'NONE', ( 0.1562957852963678400, -10.62518314118541000, 11.04440549860546000 ) ) ; +#5257 = CARTESIAN_POINT ( 'NONE', ( 11.59726086926692500, -20.97037683116486300, -22.92542371859294500 ) ) ; +#5258 = CARTESIAN_POINT ( 'NONE', ( 17.68719255689186600, -31.29913968154959000, 28.74438700826458900 ) ) ; +#5259 = CARTESIAN_POINT ( 'NONE', ( 5.237562743928034300, -95.07596123493894400, 11.74817948057322400 ) ) ; +#5260 = ORIENTED_EDGE ( 'NONE', *, *, #9913, .T. ) ; +#5261 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -97.51638471114853200, 22.06850012136330700 ) ) ; +#5262 = CARTESIAN_POINT ( 'NONE', ( 23.23370660108702500, -19.35908112949170600, 23.34974148224991500 ) ) ; +#5263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#5264 = CARTESIAN_POINT ( 'NONE', ( 3.573474766334783700, -14.68914479826311800, -20.26918752877965000 ) ) ; +#5265 = CARTESIAN_POINT ( 'NONE', ( 10.44437460967814800, -30.88373596072907600, 27.66581648652692500 ) ) ; +#5266 = CARTESIAN_POINT ( 'NONE', ( 35.26959942775045700, -30.44138093608310300, 24.53487195428140300 ) ) ; +#5267 = ORIENTED_EDGE ( 'NONE', *, *, #9416, .F. ) ; +#5268 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -16.29999999999999000 ) ) ; +#5269 = EDGE_CURVE ( 'NONE', #2471, #6306, #4067, .T. ) ; +#5270 = CARTESIAN_POINT ( 'NONE', ( 16.47347130523294800, -20.76917086172695900, -24.35775166927113800 ) ) ; +#5271 = CIRCLE ( 'NONE', #11161, 2.499999999999998700 ) ; +#5272 = CARTESIAN_POINT ( 'NONE', ( 2.500960533975809000, -21.21683027331821900, 7.963184896324850800 ) ) ; +#5273 = CARTESIAN_POINT ( 'NONE', ( 6.581158933111574100, -29.65167393899557500, 25.71305816533485000 ) ) ; +#5274 = CARTESIAN_POINT ( 'NONE', ( 7.420454399330930400, -18.86117725641088000, -23.37485238133719200 ) ) ; +#5275 = CARTESIAN_POINT ( 'NONE', ( 29.98176090574356000, -10.00000000000000400, 26.22643195080462800 ) ) ; +#5276 = ORIENTED_EDGE ( 'NONE', *, *, #6271, .T. ) ; +#5277 = CARTESIAN_POINT ( 'NONE', ( 29.08701523084696600, -32.89644138586466900, 27.36867768153859300 ) ) ; +#5278 = CARTESIAN_POINT ( 'NONE', ( 3.736238574751753900, -28.93873984967491700, 22.36207715195212500 ) ) ; +#5279 = CARTESIAN_POINT ( 'NONE', ( 13.05846279649622800, -99.99999999999995700, 5.807110827402664400 ) ) ; +#5280 = AXIS2_PLACEMENT_3D ( 'NONE', #9173, #5965, #10440 ) ; +#5281 = CARTESIAN_POINT ( 'NONE', ( 11.37219498956541100, -22.35851421764342100, -25.85922812265625800 ) ) ; +#5282 = FACE_OUTER_BOUND ( 'NONE', #3312, .T. ) ; +#5283 = CARTESIAN_POINT ( 'NONE', ( 2.815535670176603700, -96.31691071131609800, 12.92966801874713800 ) ) ; +#5284 = ORIENTED_EDGE ( 'NONE', *, *, #4620, .F. ) ; +#5285 = CARTESIAN_POINT ( 'NONE', ( 30.66308317669128100, -30.94155170950559600, 27.21900704557360500 ) ) ; +#5286 = CIRCLE ( 'NONE', #6810, 2.499999999999998700 ) ; +#5287 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991100, -27.09143239524032200, 6.754920151478385600 ) ) ; +#5288 = CARTESIAN_POINT ( 'NONE', ( 8.446998734106738700, -30.89858729069472800, 26.82159701989240100 ) ) ; +#5289 = CARTESIAN_POINT ( 'NONE', ( 36.50137757520980800, -30.51924079563508100, 22.55600454252070000 ) ) ; +#5290 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13064, #8634, #3056, #10900 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0007430783958340473900 ), + .UNSPECIFIED. ) ; +#5291 = CARTESIAN_POINT ( 'NONE', ( 12.24929690643155000, -21.28024769642980000, 29.99586342963844000 ) ) ; +#5292 = EDGE_CURVE ( 'NONE', #13145, #13139, #3223, .T. ) ; +#5293 = CARTESIAN_POINT ( 'NONE', ( 4.985551739735627500, -31.05206352313952000, 23.91438826571363700 ) ) ; +#5294 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.22539636942727300, 15.70983805885671500 ) ) ; +#5295 = CIRCLE ( 'NONE', #12623, 2.499999999999999600 ) ; +#5296 = CARTESIAN_POINT ( 'NONE', ( 34.69628850058721500, -21.95765963330000000, -20.75795289931921100 ) ) ; +#5297 = CARTESIAN_POINT ( 'NONE', ( 24.79040956944749800, -17.87309699526055000, 23.57679065800386900 ) ) ; +#5298 = CARTESIAN_POINT ( 'NONE', ( 23.02742777465183700, -31.28402665534758100, 28.74705122376075600 ) ) ; +#5299 = ORIENTED_EDGE ( 'NONE', *, *, #12742, .T. ) ; +#5300 = CARTESIAN_POINT ( 'NONE', ( 33.53072634423405400, -31.16852825381674200, 25.35300751651917700 ) ) ; +#5301 = CARTESIAN_POINT ( 'NONE', ( 3.560169438727765800, -28.87827874016825500, 21.82353685219985100 ) ) ; +#5302 = CYLINDRICAL_SURFACE ( 'NONE', #6403, 3.189999999999994200 ) ; +#5303 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -96.63045792889080600, 22.10430763399309100 ) ) ; +#5304 = CARTESIAN_POINT ( 'NONE', ( 32.46333346361738800, -31.13258263340228600, 26.17264040433449800 ) ) ; +#5305 = CARTESIAN_POINT ( 'NONE', ( 3.951752039586929200, -28.99302093526630800, 22.80608517446373900 ) ) ; +#5306 = ORIENTED_EDGE ( 'NONE', *, *, #13499, .T. ) ; +#5307 = CARTESIAN_POINT ( 'NONE', ( 0.005961281889184284100, -10.02384512755668300, 10.61358511599683600 ) ) ; +#5308 = CARTESIAN_POINT ( 'NONE', ( 11.94469728858013200, -12.49999999999973500, -21.64176483400587600 ) ) ; +#5309 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995100, -99.99999999999998600, 15.71726571334576600 ) ) ; +#5310 = CIRCLE ( 'NONE', #11202, 5.000000000000000900 ) ; +#5311 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 1.200000000000007500 ) ) ; +#5312 = CARTESIAN_POINT ( 'NONE', ( 4.849991059474024100, -95.07596123493894400, 3.052861428455402800 ) ) ; +#5313 = ORIENTED_EDGE ( 'NONE', *, *, #4972, .T. ) ; +#5314 = CARTESIAN_POINT ( 'NONE', ( 10.76723879962001400, -94.73948908643934900, 17.74561157032159600 ) ) ; +#5315 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#5316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5317 = CARTESIAN_POINT ( 'NONE', ( 4.292159328409064200, -9.953581993545048700, -24.99181525307128700 ) ) ; +#5318 = CARTESIAN_POINT ( 'NONE', ( 10.44477559488029800, -30.75774873257035900, 27.69132151484894100 ) ) ; +#5319 = CARTESIAN_POINT ( 'NONE', ( 34.61371848689695700, -29.33688371555902900, 24.66168746362672700 ) ) ; +#5320 = ORIENTED_EDGE ( 'NONE', *, *, #5471, .T. ) ; +#5321 = CARTESIAN_POINT ( 'NONE', ( 2.834104726468894800, -29.66266797768497600, 18.52404584118068000 ) ) ; +#5322 = CARTESIAN_POINT ( 'NONE', ( 8.080259412698183000, -21.35428814240208700, -20.18059119642953500 ) ) ; +#5323 = ADVANCED_FACE ( 'NONE', ( #2861 ), #2325, .F. ) ; +#5324 = CARTESIAN_POINT ( 'NONE', ( 2.202639056527795800, -18.80028425658924700, 8.211106463777971600 ) ) ; +#5325 = CARTESIAN_POINT ( 'NONE', ( 2.499999989297200900, -21.23105625617693100, -11.53187062879838500 ) ) ; +#5326 = CARTESIAN_POINT ( 'NONE', ( 6.609740435384329900, -30.59404755941102400, 25.89358806426527000 ) ) ; +#5327 = CARTESIAN_POINT ( 'NONE', ( 15.41244416662373800, -18.12483503246075500, -26.43262763002811200 ) ) ; +#5328 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2619, #3735, #12680, #5972, #13777, #7097, #484, #8248, #1574, #9370 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 3.878959614448864200E-018, 0.001982649081678046700, 0.003965298163356089000, 0.005947947245034132200, 0.007930596326712172800 ), + .UNSPECIFIED. ) ; +#5329 = LINE ( 'NONE', #3114, #4282 ) ; +#5330 = CARTESIAN_POINT ( 'NONE', ( 2.202743003830879500, -18.81097201532339400, 8.005331014629296900 ) ) ; +#5331 = CARTESIAN_POINT ( 'NONE', ( 28.29794824467958500, -31.73787585330645600, 20.01290877163163300 ) ) ; +#5332 = CARTESIAN_POINT ( 'NONE', ( 4.055442817294947500, -29.01482952623188500, 22.97320546706251700 ) ) ; +#5333 = CARTESIAN_POINT ( 'NONE', ( 5.650693702021849100, -99.99999999999995700, -2.025726487526184400 ) ) ; +#5334 = CARTESIAN_POINT ( 'NONE', ( 14.25593002580408200, -20.42349362833719400, -26.48597989032778300 ) ) ; +#5335 = ORIENTED_EDGE ( 'NONE', *, *, #5728, .F. ) ; +#5336 = CARTESIAN_POINT ( 'NONE', ( 30.36457718715054800, -30.53430814773850300, 27.41975923752028900 ) ) ; +#5337 = CARTESIAN_POINT ( 'NONE', ( 37.79765555455552600, -18.80937778177775900, 8.005331014629280900 ) ) ; +#5338 = CARTESIAN_POINT ( 'NONE', ( 8.446999844796479800, -30.37711070209385900, 26.91355370966086000 ) ) ; +#5339 = CARTESIAN_POINT ( 'NONE', ( 35.89088118778513300, -29.08890956383652300, 23.18019825143635900 ) ) ; +#5340 = EDGE_CURVE ( 'NONE', #834, #8436, #2515, .T. ) ; +#5341 = CARTESIAN_POINT ( 'NONE', ( 4.552823726434646700, -30.16981514686578700, 24.47199815200335800 ) ) ; +#5342 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -95.07593126905342700, 12.92975751815058200 ) ) ; +#5343 = CARTESIAN_POINT ( 'NONE', ( 31.77230777925763800, -18.50789225827074000, -24.16622180775723900 ) ) ; +#5344 = CARTESIAN_POINT ( 'NONE', ( 36.72150813490899400, -28.98404443291828500, 21.73752165820430100 ) ) ; +#5345 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -40.82281865091663800, 27.18080503950259800 ) ) ; +#5346 = ORIENTED_EDGE ( 'NONE', *, *, #11432, .F. ) ; +#5347 = CARTESIAN_POINT ( 'NONE', ( 32.07780775704392100, -31.12739924652086600, 26.41380123198035400 ) ) ; +#5348 = CARTESIAN_POINT ( 'NONE', ( 2.576482261592353100, -29.95678326717880000, 21.69743004555570200 ) ) ; +#5349 = CARTESIAN_POINT ( 'NONE', ( 12.51985178863529700, -10.56613187149684300, 24.90017567641613600 ) ) ; +#5350 = CARTESIAN_POINT ( 'NONE', ( 32.14270536220285400, -30.36412776392539900, 26.62966619767577500 ) ) ; +#5351 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11640, #1503, #6039, #13845, #14161, #7490, #851, #8632, #1947, #9761 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002772707976212263900, 0.005545415952424527900, 0.008318123928636792600, 0.01109083190484905600 ), + .UNSPECIFIED. ) ; +#5352 = CARTESIAN_POINT ( 'NONE', ( 7.488528466662986100, -22.15856892750823800, -23.29842959542393300 ) ) ; +#5353 = CARTESIAN_POINT ( 'NONE', ( 16.14058307586758200, -12.49999999999999800, -14.13537362251500100 ) ) ; +#5354 = CARTESIAN_POINT ( 'NONE', ( -1.084202172485494800E-016, -2.500000000000016400, 25.00000000000000000 ) ) ; +#5355 = EDGE_CURVE ( 'NONE', #10401, #4109, #2666, .T. ) ; +#5356 = CARTESIAN_POINT ( 'NONE', ( 20.79892261115664500, -25.49316313802544800, 22.26813732224372100 ) ) ; +#5357 = CARTESIAN_POINT ( 'NONE', ( 6.433979477829421300, -93.13549189012032100, 20.50024107807937000 ) ) ; +#5358 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.999999999999996400, -19.74219049453704900 ) ) ; +#5359 = CARTESIAN_POINT ( 'NONE', ( 27.41640404629845000, -11.87724389807648100, 24.55522993379390300 ) ) ; +#5360 = CARTESIAN_POINT ( 'NONE', ( 34.91385798727409200, -95.07596123493863200, 13.35561598479603000 ) ) ; +#5361 = CARTESIAN_POINT ( 'NONE', ( 30.84079363686673100, -10.61992391687500100, 23.95766396894485700 ) ) ; +#5362 = CARTESIAN_POINT ( 'NONE', ( 10.75130111084724900, -30.87375470659719700, 27.77008436098246200 ) ) ; +#5363 = CARTESIAN_POINT ( 'NONE', ( 34.96378861838716300, -30.24271867457165200, 24.87128773660221600 ) ) ; +#5364 = CARTESIAN_POINT ( 'NONE', ( 17.62479207505101200, -31.29794767705911000, 28.74459719081738700 ) ) ; +#5365 = CARTESIAN_POINT ( 'NONE', ( 5.017616124421799400, -22.40082825061377400, -12.68695046404350700 ) ) ; +#5366 = DIRECTION ( 'NONE', ( -0.01909900421572703600, 0.9998175973836266300, 0.0000000000000000000 ) ) ; +#5367 = CARTESIAN_POINT ( 'NONE', ( 2.410645499682242400, -19.58056540890311600, 8.576070452567790900 ) ) ; +#5368 = CARTESIAN_POINT ( 'NONE', ( 13.83200581722725000, -94.74466040478738200, 18.43525633179985200 ) ) ; +#5369 = CARTESIAN_POINT ( 'NONE', ( 6.732122242372741800, -29.75665151839873000, 25.85771779951526400 ) ) ; +#5370 = CARTESIAN_POINT ( 'NONE', ( 15.13585281838066300, -20.69847717337067300, -26.88643017814683800 ) ) ; +#5371 = FACE_OUTER_BOUND ( 'NONE', #6124, .T. ) ; +#5372 = CARTESIAN_POINT ( 'NONE', ( 31.61266019899281000, -37.74862711309454300, 16.98544764958362000 ) ) ; +#5373 = CARTESIAN_POINT ( 'NONE', ( 4.998939426270311500, -29.23831204986195700, 24.25047471847579300 ) ) ; +#5374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5375 = VERTEX_POINT ( 'NONE', #10020 ) ; +#5376 = EDGE_CURVE ( 'NONE', #659, #5564, #6639, .T. ) ; +#5377 = CARTESIAN_POINT ( 'NONE', ( 37.49986538957067200, -20.41717181229698500, 7.752433539642933800 ) ) ; +#5378 = CARTESIAN_POINT ( 'NONE', ( 30.36874390273306500, -30.81171235546776200, 27.38195923541906800 ) ) ; +#5379 = CARTESIAN_POINT ( 'NONE', ( 26.94153720350374600, -20.28809933267076800, -23.49060858372243000 ) ) ; +#5380 = CARTESIAN_POINT ( 'NONE', ( 8.657150593919421800, -31.04304163590162300, 26.85992294116437100 ) ) ; +#5381 = CARTESIAN_POINT ( 'NONE', ( 36.51066008895901400, -30.19280303267324300, 23.11816243208202700 ) ) ; +#5382 = FACE_OUTER_BOUND ( 'NONE', #6803, .T. ) ; +#5383 = CARTESIAN_POINT ( 'NONE', ( 4.986528961562456200, -29.23717497752007000, 24.23349132489278500 ) ) ; +#5384 = ORIENTED_EDGE ( 'NONE', *, *, #8084, .T. ) ; +#5385 = CARTESIAN_POINT ( 'NONE', ( 28.51292725127200700, -20.39644849042420600, -25.56511213932594000 ) ) ; +#5386 = CARTESIAN_POINT ( 'NONE', ( 37.28008003123069600, -30.10949015855741700, 21.53907437498755000 ) ) ; +#5387 = ADVANCED_FACE ( 'NONE', ( #2182 ), #4473, .T. ) ; +#5388 = CARTESIAN_POINT ( 'NONE', ( 30.12644288628404600, -30.95879336986632800, 27.43265123344892200 ) ) ; +#5389 = CARTESIAN_POINT ( 'NONE', ( 3.488260265505343800, -28.91851050899535400, 21.87915717954980700 ) ) ; +#5390 = CARTESIAN_POINT ( 'NONE', ( 32.12708431710063200, -30.94223413467978300, 26.49816830492352100 ) ) ; +#5391 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669239200, -0.9848077530122092400 ) ) ; +#5392 = CARTESIAN_POINT ( 'NONE', ( 10.45277858988427900, -21.06714753627059300, -22.23517709561811300 ) ) ; +#5393 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999988900, -99.99999999999998600, -34.56037615019668900 ) ) ; +#5394 = EDGE_LOOP ( 'NONE', ( #6948, #3490, #4244, #604 ) ) ; +#5395 = CARTESIAN_POINT ( 'NONE', ( 4.800291254195392400, -97.43668338074830600, 18.95626174933512700 ) ) ; +#5396 = EDGE_LOOP ( 'NONE', ( #10520, #9533, #13614, #7710 ) ) ; +#5397 = AXIS2_PLACEMENT_3D ( 'NONE', #1662, #9456, #2756 ) ; +#5398 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5399 = CARTESIAN_POINT ( 'NONE', ( 0.03852661699505077800, 7.709542493230035400, -20.63080313393614800 ) ) ; +#5400 = CARTESIAN_POINT ( 'NONE', ( 10.75254745996995500, -30.80272953060989800, 27.78473378277886500 ) ) ; +#5401 = CARTESIAN_POINT ( 'NONE', ( 34.61453593567308900, -31.10476844623707000, 24.35084987267156400 ) ) ; +#5402 = CARTESIAN_POINT ( 'NONE', ( 22.90752479384776000, -24.23648177599475800, 19.98972415252784900 ) ) ; +#5403 = CARTESIAN_POINT ( 'NONE', ( 33.77246673311748300, -31.11370694955030600, 25.20788165943402600 ) ) ; +#5404 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#5405 = CARTESIAN_POINT ( 'NONE', ( 17.64039441766889400, -33.35446909076586800, 26.50697697917620100 ) ) ; +#5406 = ORIENTED_EDGE ( 'NONE', *, *, #7678, .F. ) ; +#5407 = CARTESIAN_POINT ( 'NONE', ( 2.560432769953132000, -20.33925679031853700, 9.316698394486294900 ) ) ; +#5408 = CARTESIAN_POINT ( 'NONE', ( 37.50695120246196300, -10.00000000000008200, 20.46550316961932800 ) ) ; +#5409 = CARTESIAN_POINT ( 'NONE', ( 6.746476813713128400, -30.87624486907660800, 25.83646527102142100 ) ) ; +#5410 = CARTESIAN_POINT ( 'NONE', ( 36.76413662936761300, -30.26942355435941300, 20.62625925235641900 ) ) ; +#5411 = EDGE_CURVE ( 'NONE', #11059, #7173, #1844, .T. ) ; +#5412 = CARTESIAN_POINT ( 'NONE', ( 7.444946578428056400, -29.89079567098464800, 26.32671043571136200 ) ) ; +#5413 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000900, 16.29999999999999700 ) ) ; +#5414 = ORIENTED_EDGE ( 'NONE', *, *, #12873, .F. ) ; +#5415 = CARTESIAN_POINT ( 'NONE', ( 22.43761284503552000, -28.77726908290523500, 29.18906083666096100 ) ) ; +#5416 = CARTESIAN_POINT ( 'NONE', ( 37.60234364322501900, -19.58888102487595600, 7.866688811053171200 ) ) ; +#5417 = CARTESIAN_POINT ( 'NONE', ( 30.16171537203592100, -30.52239939782420200, 27.49700142663999000 ) ) ; +#5418 = CARTESIAN_POINT ( 'NONE', ( 31.08942613950736300, -100.0000000000000300, -34.89671252249891600 ) ) ; +#5419 = CARTESIAN_POINT ( 'NONE', ( 8.633339528369029700, -30.58813175068820200, 26.99268031947235300 ) ) ; +#5420 = CARTESIAN_POINT ( 'NONE', ( 35.70575668737240000, -29.07010235671534900, 23.34995988406944900 ) ) ; +#5421 = ORIENTED_EDGE ( 'NONE', *, *, #3000, .F. ) ; +#5422 = CARTESIAN_POINT ( 'NONE', ( 4.730100716029202300, -30.44133566791196400, 24.53459034919198700 ) ) ; +#5423 = CARTESIAN_POINT ( 'NONE', ( 30.53122179452273600, -12.21899232924005600, -24.99999999999998900 ) ) ; +#5424 = ORIENTED_EDGE ( 'NONE', *, *, #4439, .T. ) ; +#5425 = CARTESIAN_POINT ( 'NONE', ( 25.81195897628784400, -22.43348357020130400, -26.82514931130209100 ) ) ; +#5426 = CARTESIAN_POINT ( 'NONE', ( 27.66723838798598200, -32.99548121487468000, 25.94404977877906000 ) ) ; +#5427 = CARTESIAN_POINT ( 'NONE', ( 27.04941352502764200, -30.77347774677197000, 28.36758194924810200 ) ) ; +#5428 = EDGE_CURVE ( 'NONE', #2471, #5247, #11863, .T. ) ; +#5429 = CARTESIAN_POINT ( 'NONE', ( 3.060636461046024200, -30.35940143899172100, 21.73926217688820400 ) ) ; +#5430 = CARTESIAN_POINT ( 'NONE', ( 23.71124651361525800, -18.75228844240114900, 23.45673540466189200 ) ) ; +#5431 = ORIENTED_EDGE ( 'NONE', *, *, #7320, .T. ) ; +#5432 = CARTESIAN_POINT ( 'NONE', ( 31.92189306192507600, -30.15751583918710200, 26.71477836094043200 ) ) ; +#5433 = CARTESIAN_POINT ( 'NONE', ( 30.16866229193171000, -12.37897969610817300, -25.07898726161196000 ) ) ; +#5434 = CARTESIAN_POINT ( 'NONE', ( 5.017601933228194300, -22.59911394198794800, 8.278347449775914400 ) ) ; +#5435 = CARTESIAN_POINT ( 'NONE', ( 9.889865280051655100, -12.49999999999985400, -20.36590306777964100 ) ) ; +#5436 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5437 = ORIENTED_EDGE ( 'NONE', *, *, #12917, .F. ) ; +#5438 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5439 = FACE_OUTER_BOUND ( 'NONE', #5170, .T. ) ; +#5440 = CARTESIAN_POINT ( 'NONE', ( 36.68448845248649100, -30.35849349780622600, 20.90279146677163200 ) ) ; +#5441 = ORIENTED_EDGE ( 'NONE', *, *, #9697, .F. ) ; +#5442 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -21.23026870200879300, -11.47004061294431100 ) ) ; +#5443 = CARTESIAN_POINT ( 'NONE', ( 17.59442521399260800, -19.87093624336306200, 23.25948761544210400 ) ) ; +#5444 = CARTESIAN_POINT ( 'NONE', ( 10.75130419208784200, -30.72492700033565100, 27.79633276067220000 ) ) ; +#5445 = CARTESIAN_POINT ( 'NONE', ( 34.73089953708765900, -29.99318593746418300, 25.00251483221111900 ) ) ; +#5446 = CARTESIAN_POINT ( 'NONE', ( 24.82922000406207300, -12.49999999999935700, 21.84147816616917100 ) ) ; +#5447 = EDGE_CURVE ( 'NONE', #8669, #154, #7735, .T. ) ; +#5448 = CARTESIAN_POINT ( 'NONE', ( 33.78402583128981700, -29.94668329407304000, 25.61514912321799600 ) ) ; +#5449 = CARTESIAN_POINT ( 'NONE', ( 35.82073743793779400, -10.00000000000000200, 22.36143813341932300 ) ) ; +#5450 = TOROIDAL_SURFACE ( 'NONE', #6622, 2.500000000000000000, 2.500000000000000000 ) ; +#5451 = CARTESIAN_POINT ( 'NONE', ( 37.60337417403372500, -19.73860062020001700, 7.965785924488709000 ) ) ; +#5452 = ADVANCED_FACE ( 'NONE', ( #1484 ), #1147, .F. ) ; +#5453 = VERTEX_POINT ( 'NONE', #9085 ) ; +#5454 = CARTESIAN_POINT ( 'NONE', ( 2.787873737339547000, -20.98383446032159200, 10.80158078846020500 ) ) ; +#5455 = LINE ( 'NONE', #4004, #300 ) ; +#5456 = CARTESIAN_POINT ( 'NONE', ( 6.746474645494869200, -30.06118091584667300, 25.98019655008504000 ) ) ; +#5457 = CARTESIAN_POINT ( 'NONE', ( 22.35960462362702800, -27.96255689439422200, 27.45771657700752000 ) ) ; +#5458 = CARTESIAN_POINT ( 'NONE', ( 35.04947081637681800, -30.96653092008067900, 14.56942902031340000 ) ) ; +#5459 = CARTESIAN_POINT ( 'NONE', ( 9.061073235424475000, -30.32830956548377100, 27.18372395171755000 ) ) ; +#5460 = DIRECTION ( 'NONE', ( 0.9445752533666530400, 0.0000000000000000000, 0.3282949751783045300 ) ) ; +#5461 = ORIENTED_EDGE ( 'NONE', *, *, #14329, .T. ) ; +#5462 = AXIS2_PLACEMENT_3D ( 'NONE', #4736, #12574, #5865 ) ; +#5463 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -10.45051281443425700, 11.46390793638111000 ) ) ; +#5464 = CARTESIAN_POINT ( 'NONE', ( 37.80168879585180300, -18.79477880324896700, 7.944085777447595500 ) ) ; +#5465 = CARTESIAN_POINT ( 'NONE', ( 30.16701314662146800, -30.75371723873835000, 27.47266561901390600 ) ) ; +#5466 = CARTESIAN_POINT ( 'NONE', ( 34.34930629797813100, -20.28809933267076800, -15.65777126879360300 ) ) ; +#5467 = CARTESIAN_POINT ( 'NONE', ( 8.757135967411503700, -31.06351299934347000, 26.89903447953404500 ) ) ; +#5468 = CARTESIAN_POINT ( 'NONE', ( 36.34959724185876000, -29.92450141165098300, 23.42950527238808100 ) ) ; +#5469 = LINE ( 'NONE', #7504, #6323 ) ; +#5470 = ORIENTED_EDGE ( 'NONE', *, *, #11111, .F. ) ; +#5471 = EDGE_CURVE ( 'NONE', #12287, #4662, #12920, .T. ) ; +#5472 = CARTESIAN_POINT ( 'NONE', ( 5.013451354872556100, -29.41808781441011800, 24.44110481773521200 ) ) ; +#5473 = CARTESIAN_POINT ( 'NONE', ( 26.84752224756304900, -28.08124121815344800, 26.96588792518211300 ) ) ; +#5474 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5475 = CARTESIAN_POINT ( 'NONE', ( 7.006478494114716700, -10.21831299829908300, 23.34853226647738500 ) ) ; +#5476 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238600 ) ) ; +#5477 = CARTESIAN_POINT ( 'NONE', ( 3.060558022438637100, -29.14526172050223000, 21.95184563458594700 ) ) ; +#5478 = CIRCLE ( 'NONE', #6690, 1.200000000000006600 ) ; +#5479 = EDGE_LOOP ( 'NONE', ( #10194, #10885, #11079, #12558, #12751 ) ) ; +#5480 = CARTESIAN_POINT ( 'NONE', ( 35.19863671672541700, -97.43731214566997800, 18.97906090576826800 ) ) ; +#5481 = CARTESIAN_POINT ( 'NONE', ( 31.95531209434192400, -30.71651902020486700, 26.68242682266344100 ) ) ; +#5482 = CARTESIAN_POINT ( 'NONE', ( 28.93991587677251300, -30.79329487826115800, 27.88263829956652600 ) ) ; +#5483 = CARTESIAN_POINT ( 'NONE', ( 37.47677676878016200, -9.902274021631500400, 17.32653986527569500 ) ) ; +#5484 = CARTESIAN_POINT ( 'NONE', ( 9.854333823274112400, -23.87747640954554400, 17.42818606224469800 ) ) ; +#5485 = CARTESIAN_POINT ( 'NONE', ( 15.73374332639991200, -12.50000000000000000, -13.79646404362488000 ) ) ; +#5486 = ORIENTED_EDGE ( 'NONE', *, *, #8431, .F. ) ; +#5487 = EDGE_CURVE ( 'NONE', #13531, #1424, #1501, .T. ) ; +#5488 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1069, #5440, #2156, #9977, #3265, #11113, #4386, #12217, #5490, #13328, #6620, #30, #7770, #1114, #8903, #2208, #10023, #3311, #11159, #4434 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.01673300446180287300, 0.01860468515099931600, 0.02047636584019575700, 0.02234804652939220000, 0.02421972721858865100, 0.02796308859698153800, 0.02983476928617798800, 0.03077060963077620600, 0.03123852980307531600, 0.03170644997537442500 ), + .UNSPECIFIED. ) ; +#5489 = VECTOR ( 'NONE', #9463, 1000.000000000000000 ) ; +#5490 = CARTESIAN_POINT ( 'NONE', ( 37.40510466222630000, -28.77977081727095800, 14.82529594780130100 ) ) ; +#5491 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.06772555652651000, -24.99999999999999600 ) ) ; +#5492 = CARTESIAN_POINT ( 'NONE', ( 34.56802903988364100, -30.95600455551589300, 24.65280088673390000 ) ) ; +#5493 = CARTESIAN_POINT ( 'NONE', ( 23.07517288732455900, -12.50000000000001200, 10.07393397041135200 ) ) ; +#5494 = CARTESIAN_POINT ( 'NONE', ( 33.78403898636732800, -30.85892173568292300, 25.45430429876079600 ) ) ; +#5495 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5496 = ORIENTED_EDGE ( 'NONE', *, *, #11210, .F. ) ; +#5497 = CARTESIAN_POINT ( 'NONE', ( 3.021693485235650300, -18.91462133356935700, 12.88707564479694100 ) ) ; +#5498 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#5499 = CARTESIAN_POINT ( 'NONE', ( 6.993540293158413400, -31.11818564275744900, 25.81419462703893300 ) ) ; +#5500 = CARTESIAN_POINT ( 'NONE', ( 1.498495916746430900, -11.79302655810961500, -17.57270382969460700 ) ) ; +#5501 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #13690, #3635, #7001 ), + ( #391, #8152, #1485 ), + ( #9276, #2576, #10395 ), + ( #3686, #11532, #4796 ), + ( #12629, #5922, #13732 ), + ( #7054, #434, #8202 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.001039078685648095700, 0.002713700735208377100, 0.004388322784768659000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6364262416089083700, 1.000000000000000000), + ( 1.000000000000000000, 0.6472392999967762100, 1.000000000000000000), + ( 1.000000000000000000, 0.6586028924860128900, 1.000000000000000000), + ( 1.000000000000000000, 0.6823519043710742900, 1.000000000000000000), + ( 1.000000000000000000, 0.6945586424181486900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071053104101563400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5502 = CARTESIAN_POINT ( 'NONE', ( 36.82895237096332900, -31.68329557902851300, 10.47399332742085900 ) ) ; +#5503 = CARTESIAN_POINT ( 'NONE', ( 28.01512580115776200, -10.15232558920127000, 24.97314088877150700 ) ) ; +#5504 = CARTESIAN_POINT ( 'NONE', ( 38.51486228525153200, -10.27217986697340600, 16.99022357449913300 ) ) ; +#5505 = CARTESIAN_POINT ( 'NONE', ( 37.49920728123681400, -21.21814988372010500, 7.947177552033965100 ) ) ; +#5506 = CARTESIAN_POINT ( 'NONE', ( 30.16169991651074200, -30.96191575674346200, 27.41945683916802800 ) ) ; +#5507 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -10.06772555652650200, -24.99999999999999600 ) ) ; +#5508 = CARTESIAN_POINT ( 'NONE', ( 8.731483155696633200, -30.69929827882112500, 27.02037928646514000 ) ) ; +#5509 = CARTESIAN_POINT ( 'NONE', ( 35.72903568580012000, -30.89228178134789000, 23.03775702707839900 ) ) ; +#5510 = EDGE_LOOP ( 'NONE', ( #10762, #13795, #13665, #11747, #2969, #1274, #12603, #6552, #10620, #11984 ) ) ; +#5511 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 6.938893903907228400E-016 ) ) ; +#5512 = EDGE_CURVE ( 'NONE', #3143, #9986, #1828, .T. ) ; +#5513 = CARTESIAN_POINT ( 'NONE', ( 28.25260965405651700, -20.16400446421357300, 22.05121247660399700 ) ) ; +#5514 = CARTESIAN_POINT ( 'NONE', ( 5.210075466381356400, -30.84304528347296400, 24.58483212750186900 ) ) ; +#5515 = CARTESIAN_POINT ( 'NONE', ( 3.427251898130454900, -9.999999999999998200, -24.54387524590238100 ) ) ; +#5516 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5517 = ADVANCED_FACE ( 'NONE', ( #1165 ), #3603, .T. ) ; +#5518 = CARTESIAN_POINT ( 'NONE', ( 14.86947087277675500, -33.24401303854920500, 26.39543624675792400 ) ) ; +#5519 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5520 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999997900, -10.00000000000000200, -19.82850493061598500 ) ) ; +#5521 = CARTESIAN_POINT ( 'NONE', ( 3.536502139003539800, -30.58775388475015000, 21.75948813924535600 ) ) ; +#5522 = FACE_OUTER_BOUND ( 'NONE', #13954, .T. ) ; +#5523 = CARTESIAN_POINT ( 'NONE', ( 27.31762516211929900, -20.88586453004797100, -26.26541658251616700 ) ) ; +#5524 = CARTESIAN_POINT ( 'NONE', ( 31.62541638226840800, -30.14687751433527700, 26.85317899550070600 ) ) ; +#5525 = LINE ( 'NONE', #13087, #2239 ) ; +#5526 = CARTESIAN_POINT ( 'NONE', ( 1.861917612363517500, -10.10626908767073900, 18.39968536713952900 ) ) ; +#5527 = CARTESIAN_POINT ( 'NONE', ( 28.93948162119694000, -30.82564618359191000, 27.87715373513055900 ) ) ; +#5528 = CARTESIAN_POINT ( 'NONE', ( 36.44931229836912900, -30.55092192646149500, 21.46123847276539500 ) ) ; +#5529 = ORIENTED_EDGE ( 'NONE', *, *, #8603, .T. ) ; +#5530 = CARTESIAN_POINT ( 'NONE', ( 30.46525147365243300, -10.00000000000000000, 23.87496225496915500 ) ) ; +#5531 = CARTESIAN_POINT ( 'NONE', ( 2.117525709379605400, -11.91741274050320800, -18.95475523009079000 ) ) ; +#5532 = CARTESIAN_POINT ( 'NONE', ( 7.250417715197188300, -21.50768243191999900, -19.08815555742231900 ) ) ; +#5533 = CARTESIAN_POINT ( 'NONE', ( 1.726604274503889000, -10.05375953237826700, -19.17028665471516300 ) ) ; +#5534 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, 9.934684141622275500 ) ) ; +#5535 = EDGE_CURVE ( 'NONE', #2778, #7937, #7652, .T. ) ; +#5536 = CARTESIAN_POINT ( 'NONE', ( 3.586081535131283800, -30.36904334389634700, 23.06820850870590100 ) ) ; +#5537 = CARTESIAN_POINT ( 'NONE', ( -0.02499999999999287500, -9.900000000000003900, 8.005331014629295100 ) ) ; +#5538 = ADVANCED_FACE ( 'NONE', ( #810 ), #11528, .T. ) ; +#5539 = CARTESIAN_POINT ( 'NONE', ( 0.3697137588234290500, -10.86794128449622800, -13.94778078257754600 ) ) ; +#5540 = CARTESIAN_POINT ( 'NONE', ( 34.23928086673287700, -29.65500805159963000, 25.17680286696014100 ) ) ; +#5541 = ORIENTED_EDGE ( 'NONE', *, *, #4599, .F. ) ; +#5542 = CARTESIAN_POINT ( 'NONE', ( 27.01726813379359300, -24.11844911070382500, 19.15057202874160700 ) ) ; +#5543 = CARTESIAN_POINT ( 'NONE', ( 33.52254888843692300, -29.68884138702944900, 25.66748491394307400 ) ) ; +#5544 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #6679 ) ; +#5545 = CARTESIAN_POINT ( 'NONE', ( 3.910664979554280900, -19.52088483376168800, 14.73788391211409100 ) ) ; +#5546 = CARTESIAN_POINT ( 'NONE', ( 8.851318836928827600, -95.07596123493894400, 15.12240204612828100 ) ) ; +#5547 = CARTESIAN_POINT ( 'NONE', ( 5.079444058923986200, -100.0000000000000100, -4.444869195815393900 ) ) ; +#5548 = CARTESIAN_POINT ( 'NONE', ( 6.887280404828261200, -30.38449177810040800, 26.10911496323449300 ) ) ; +#5549 = CARTESIAN_POINT ( 'NONE', ( -2.490161982865446400E-008, -10.00000000622538500, -11.53324907984514000 ) ) ; +#5550 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524033600, 6.754920151478379400 ) ) ; +#5551 = CARTESIAN_POINT ( 'NONE', ( 12.00831176513601100, -10.11657920445879600, 24.97944394086438500 ) ) ; +#5552 = CARTESIAN_POINT ( 'NONE', ( 29.82171378888968900, -100.0000000000000100, -35.96519623375461100 ) ) ; +#5553 = EDGE_CURVE ( 'NONE', #5564, #8229, #824, .T. ) ; +#5554 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8049, #299, #6905, #9184, #2478, #10298, #3595, #11436 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.006875659503174323500, 0.007622770305817688100, 0.007996325707139364700, 0.008369881108461041400 ), + .UNSPECIFIED. ) ; +#5555 = CARTESIAN_POINT ( 'NONE', ( 16.43119947697346500, -19.09656950022997200, 23.39602936521977100 ) ) ; +#5556 = CARTESIAN_POINT ( 'NONE', ( 37.50047624763084300, -20.40155149709030300, 7.975111584142720000 ) ) ; +#5557 = ORIENTED_EDGE ( 'NONE', *, *, #5178, .T. ) ; +#5558 = CARTESIAN_POINT ( 'NONE', ( 29.75983472143023100, -30.73932424698344000, 27.62359791450190700 ) ) ; +#5559 = CARTESIAN_POINT ( 'NONE', ( 0.09712465669868128300, 10.19006527892301500, 0.3593456658651226800 ) ) ; +#5560 = CARTESIAN_POINT ( 'NONE', ( 8.755885428550580900, -30.25986029960757400, 27.04353025224791600 ) ) ; +#5561 = CARTESIAN_POINT ( 'NONE', ( 35.94234091673530400, -29.64386960645756700, 23.76607844514455800 ) ) ; +#5562 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 3, ( + ( #3937, #6170, #9572, #2868, #10703, #3978, #11818, #5093, #12929, #6220, #14032, #7351, #722, #8502, #1820, #9629, #2922, #10764, #4031, #11873, #5146, #12983, #6272, #14085, #7414, #774, #8556, #1876, #9686, #2975 ), + ( #10821, #4091, #11925, #5199, #13042, #6329, #14139, #7469, #831, #8614, #1924, #9740, #3030, #10876, #4140, #11978, #5250, #13090, #6384, #14189, #7519, #878, #8664, #1973, #9788, #3083, #10928, #4191, #12027, #5301 ), + ( #13141, #6431, #14236, #7568, #921, #8710, #2021, #9834, #3127, #10978, #4241, #12074, #5348, #13188, #6479, #14277, #7616, #965, #8754, #2063, #9882, #3172, #11017, #4291, #12118, #5389, #13230, #6521, #14321, #7657 ), + ( #1012, #8801, #2103, #9929, #3215, #11056, #4330, #12165, #5429, #13272, #6567, #14363, #7705, #1054, #8845, #2143, #9966, #3254, #11099, #4374, #12204, #5477, #13315, #6610, #17, #7756, #1101, #8889, #2193, #10009 ), + ( #3297, #11148, #4420, #12251, #5521, #13356, #6656, #63, #7802, #1152, #8937, #2235, #10060, #3344, #11193, #4468, #12297, #5572, #13398, #6707, #108, #7847, #1199, #8984, #2284, #10110, #3394, #11237, #4510, #12343 ), + ( #5623, #13446, #6751, #157, #7891, #1236, #9031, #2329, #10156, #3441, #11285, #4552, #12385, #5672, #13491, #6797, #198, #7941, #1278, #9077, #2377, #10204, #3484, #11329, #4600, #12429, #5716, #13532, #6843, #233 ), + ( #7985, #1322, #9120, #2415, #10247, #3531, #11374, #4643, #12481, #5765, #13576, #6891, #284, #8034, #1375, #9169, #2464, #10287, #3582, #11420, #4687, #12530, #5816, #13622, #6938, #331, #8085, #1419, #9218, #2514 ), + ( #10331, #3624, #11472, #4733, #12571, #5863, #13676, #6985, #377, #8138, #1471, #9266, #2565, #10381, #3672, #11520, #4788, #12617, #5911, #13723, #7042, #423, #8190, #1524, #9315, #2610, #10436, #3724, #11566, #4828 ), + ( #12670, #5961, #13769, #7088, #473, #8239, #1566, #9363, #2657, #10487, #3774, #11613, #4877, #12716, #6015, #13819, #7138, #522, #8289, #1610, #9408, #2711, #7992, #3089, #10931, #4198, #12031, #5305, #13144, #6438 ), + ( #29, #7767, #1112, #8901, #2205, #10022, #3310, #11157, #4431, #12262, #5536, #13369, #6670, #73, #7813, #1163, #8949, #2249, #10076, #3354, #11203, #4474, #12307, #5583, #13411, #6719, #120, #7856, #1208, #8995 ), + ( #2295, #10121, #3408, #11250, #4521, #12353, #5632, #13455, #6764, #168, #7905, #1246, #9042, #2340, #10168, #3450, #11299, #4564, #12398, #5681, #13500, #6807, #207, #7954, #1289, #9087, #2387, #10213, #3495, #11339 ), + ( #4613, #12442, #5729, #13542, #6855, #245, #7998, #1337, #9133, #2426, #10258, #3540, #11383, #4651, #12493, #5777, #13586, #6900, #295, #8045, #1384, #9181, #2475, #10295, #3591, #11430, #4697, #12537, #5827, #13635 ), + ( #6950, #341, #8096, #1428, #9226, #2524, #10342, #3633, #11482, #4745, #12582, #5872, #13688, #6998, #389, #8150, #1483, #9275, #2575, #10393, #3684, #11530, #4795, #12626, #5920, #13730, #7053, #432, #8200, #1532 ), + ( #9324, #2618, #10445, #3734, #11574, #4837, #12679, #5970, #13776, #7096, #483, #8247, #1573, #9369, #2665, #10494, #3781, #11622, #4884, #12724, #6023, #13828, #7147, #531, #8301, #1619, #9417, #2719, #10546, #3825 ), + ( #11669, #4929, #12772, #6063, #13874, #7191, #572, #8344, #1667, #9461, #2762, #10600, #3878, #11714, #4981, #12823, #6109, #13916, #7240, #613, #8391, #1711, #9516, #2806, #10648, #3927, #11762, #5027, #12874, #6160 ), + ( #13967, #7286, #662, #8439, #1754, #9563, #2856, #10692, #3971, #11807, #5081, #12919, #6213, #14019, #7340, #711, #8492, #1808, #9618, #2911, #10753, #4021, #11862, #5135, #12972, #6260, #14073, #7401, #762, #8545 ), + ( #1866, #9673, #2965, #10808, #4078, #11914, #5190, #13029, #6317, #14128, #7457, #819, #8604, #1915, #9730, #3019, #10866, #4131, #11970, #5241, #13082, #6374, #14180, #7509, #870, #8654, #1966, #9780, #3075, #10918 ), + ( #4183, #12019, #5293, #13134, #6424, #14228, #7559, #913, #8704, #2012, #9826, #3122, #10972, #4231, #12067, #5341, #13179, #6471, #14272, #7609, #957, #8746, #2055, #9874, #3165, #11010, #4285, #12111, #5383, #13223 ), + ( #6515, #14314, #7651, #1006, #8793, #2097, #9923, #3208, #11050, #4323, #12158, #5422, #13266, #6559, #14358, #7698, #1048, #8841, #2137, #9959, #3250, #11093, #4368, #12200, #5472, #13308, #6604, #9, #7748, #1093 ), + ( #8884, #2186, #10005, #3293, #11140, #4412, #12245, #5514, #13352, #6650, #57, #7796, #1144, #8930, #2230, #10053, #3338, #11187, #4463, #12289, #5566, #13393, #6701, #100, #7842, #1193, #8979, #2279, #10105, #3387 ), + ( #11232, #4503, #12338, #5615, #13441, #6747, #152, #7887, #1234, #9028, #2323, #10149, #3438, #11279, #4547, #12378, #5666, #13485, #6792, #193, #7935, #1273, #9071, #2370, #10197, #3478, #11325, #4593, #12423, #5709 ), + ( #13527, #6835, #228, #7979, #1316, #9113, #2409, #10240, #3524, #11368, #4639, #12474, #5759, #13568, #6886, #279, #8027, #1369, #9161, #2456, #10282, #3575, #11413, #4682, #12525, #5811, #13616, #6934, #326, #8079 ), + ( #1415, #9213, #2509, #10324, #3619, #11467, #4729, #12566, #5860, #13671, #6980, #373, #8133, #1464, #9259, #2560, #10376, #3666, #11514, #4781, #12611, #5905, #13718, #7036, #417, #8183, #1518, #9308, #2604, #10430 ), + ( #3719, #11559, #4821, #12664, #5955, #13762, #7083, #466, #8232, #1559, #9356, #2650, #10480, #3766, #11608, #4871, #12711, #6009, #13813, #7131, #517, #8283, #1606, #9402, #2704, #10531, #3813, #11656, #4915, #12758 ), + ( #6050, #13860, #7176, #559, #8333, #1652, #9447, #2747, #10586, #3863, #11702, #4967, #12807, #6095, #13903, #7227, #600, #8379, #1699, #9501, #2794, #10635, #3913, #11749, #5014, #12861, #6144, #13953, #7273, #649 ), + ( #8425, #1741, #9552, #2840, #10678, #3959, #11796, #5067, #12906, #6199, #14002, #7324, #697, #8477, #1794, #9600, #2893, #10731, #4005, #11843, #5118, #12955, #6246, #14055, #7379, #746, #8528, #1849, #9655, #2948 ), + ( #10791, #4060, #11897, #5173, #13013, #6301, #14109, #7440, #801, #8585, #1900, #9714, #3004, #10847, #4114, #11953, #5225, #13065, #6357, #14165, #7493, #855, #8635, #1949, #9766, #3058, #10901, #4166, #12004, #5273 ), + ( #13116, #6410, #14213, #7544, #895, #8689, #1997, #9811, #3108, #10954, #4218, #12050, #5326, #13164, #6456, #14257, #7591, #944, #8730, #2044, #9856, #3150, #10999, #4269, #12096, #5369, #13210, #6500, #14299, #7637 ), + ( #992, #8779, #2082, #9907, #3193, #11035, #4311, #12145, #5409, #13252, #6543, #14345, #7683, #1038, #8825, #2124, #9944, #3234, #11077, #4353, #12187, #5456, #13293, #6587, #14385, #7728, #1079, #8869, #2170, #9989 ), + ( #3275, #11122, #4393, #12227, #5499, #13338, #6632, #38, #7778, #1126, #8914, #2217, #10036, #3322, #11171, #4445, #12272, #5548, #13379, #6684, #87, #7824, #1178, #8962, #2262, #10090, #3372, #11217, #4486, #12321 ), + ( #5596, #13426, #6733, #137, #7871, #1221, #9011, #2308, #10135, #3421, #11264, #4533, #12363, #5647, #13467, #6777, #180, #7919, #1260, #9054, #2355, #10182, #3464, #11313, #4579, #12411, #5694, #13513, #6820, #218 ), + ( #7967, #1304, #9100, #2399, #10226, #3508, #11353, #4627, #12457, #5742, #13554, #6871, #260, #8013, #1356, #4737, #12575, #5866, #13681, #6990, #380, #8141, #1475, #9269, #2569, #10386, #3676, #11523, #4790, #12620 ), + ( #5913, #13726, #7047, #426, #8192, #1527, #9318, #2613, #10441, #3730, #11570, #4831, #12673, #5966, #13772, #7092, #479, #8243, #1568, #9366, #2661, #10490, #3778, #11618, #4880, #12719, #6018, #13823, #7142, #528 ), + ( #8296, #1615, #9411, #2716, #10541, #3823, #11665, #4925, #12768, #6058, #13869, #7187, #568, #8341, #1663, #9457, #2757, #10596, #3874, #11712, #4977, #12818, #6104, #13909, #7236, #609, #8386, #1707, #9512, #2803 ), + ( #10642, #3923, #11759, #5024, #12870, #6155, #13962, #7279, #656, #8434, #1751, #9560, #2851, #10687, #3966, #11803, #5076, #12915, #6209, #14013, #7334, #706, #8486, #1804, #9613, #2907, #10747, #4017, #11855, #5129 ), + ( #12967, #6257, #14069, #7395, #757, #8537, #1860, #9668, #2962, #10803, #4073, #11909, #5184, #13024, #6312, #14124, #7454, #816, #8598, #1910, #9725, #3015, #10862, #4127, #11966, #5237, #13076, #6369, #14176, #7507 ), + ( #868, #8651, #1961, #9775, #3069, #10913, #4180, #12016, #5288, #13129, #6420, #14224, #7554, #908, #8701, #2008, #9821, #3117, #10967, #4227, #12062, #5338, #13177, #6467, #14267, #7603, #954, #8743, #2053, #9871 ), + ( #3161, #11008, #4280, #12107, #5380, #13219, #6511, #14310, #7649, #1003, #8789, #2093, #9920, #3206, #11046, #4320, #12154, #5419, #13262, #6555, #14355, #7694, #1046, #8836, #2134, #9956, #3246, #11089, #4363, #12196 ), + ( #5467, #13303, #6599, #3, #7742, #1089, #8880, #2180, #10000, #3287, #11135, #4406, #12237, #5508, #13348, #6643, #51, #7791, #1138, #8924, #2225, #10045, #3333, #11182, #4457, #12283, #5560, #13388, #6695, #95 ), + ( #7835, #1189, #8973, #2272, #10099, #3380, #11226, #4497, #12333, #5609, #13435, #6741, #145, #7881, #1230, #9020, #2319, #10145, #3431, #11272, #4544, #12373, #5659, #13478, #6787, #187, #7925, #1267, #9064, #2365 ), + ( #10190, #3473, #11320, #4585, #12418, #5703, #13523, #6829, #224, #7973, #1309, #9108, #2404, #10234, #3518, #11362, #4634, #12466, #5752, #13562, #6880, #273, #8023, #1364, #9153, #2449, #10277, #3569, #11409, #4678 ), + ( #12519, #5805, #13612, #6927, #320, #8075, #1411, #9207, #2503, #10319, #3614, #11460, #4724, #12561, #5855, #13662, #6975, #366, #8125, #1457, #9254, #2552, #10368, #3659, #11506, #4774, #12606, #5900, #13713, #7028 ), + ( #411, #8175, #1511, #9301, #2599, #10423, #3711, #11554, #4817, #12654, #5949, #13757, #7076, #458, #8227, #1555, #9351, #2643, #10474, #3761, #11601, #4864, #12704, #6000, #13804, #7125, #511, #8274, #1599, #9395 ), + ( #2695, #10523, #3808, #11647, #4907, #12749, #6044, #13852, #7170, #553, #8326, #1643, #9438, #2741, #10577, #3853, #11695, #4958, #12797, #6085, #13896, #7217, #592, #8371, #1690, #9491, #2785, #10626, #3905, #11742 ), + ( #5007, #12852, #6135, #13945, #7265, #643, #8419, #1736, #9545, #2829, #10671, #3954, #11789, #5058, #12899, #6188, #13994, #7315, #689, #8468, #1785, #9591, #2886, #10722, #3996, #11835, #5110, #12945, #6238, #14046 ), + ( #7369, #738, #8520, #1839, #9648, #2940, #10782, #4050, #11889, #5164, #13004, #6291, #14102, #7431, #792, #8575, #1893, #9705, #2994, #10839, #4106, #11943, #5217, #13056, #6348, #14158, #7485, #846, #8628, #1942 ), + ( #9758, #3048, #10893, #4157, #11997, #5265, #13107, #6401, #14206, #7535, #889, #8682, #1986, #9803, #3101, #10943, #4209, #12043, #5318, #13156, #6447, #14249, #7582, #937, #8723, #2037, #9848, #3141, #10992, #4258 ), + ( #12088, #5362, #13202, #6491, #14291, #7630, #979, #8769, #2076, #9898, #3182, #11027, #4303, #12133, #5400, #13244, #6536, #14334, #7673, #1028, #8814, #2114, #9937, #3226, #11066, #4344, #12179, #5444, #13284, #6579 ), + ( #14377, #7718, #1071, #8860, #2351, #10178, #3460, #11309, #4575, #12407, #5690, #13509, #6817, #215, #7964, #1299, #9096, #2396, #10223, #3504, #11349, #4623, #12452, #5738, #13550, #6867, #256, #8010, #1352, #9143 ), + ( #2437, #10268, #3556, #11397, #4666, #12507, #5791, #13600, #6914, #308, #8059, #1397, #9195, #2490, #10306, #3604, #11448, #4709, #12547, #5842, #13648, #6961, #353, #8110, #1441, #9239, #2539, #10355, #3646, #11492 ), + ( #4759, #12594, #5886, #13701, #7013, #399, #8162, #1497, #9287, #2587, #10408, #3697, #11542, #4806, #12641, #5933, #13743, #7065, #445, #8214, #1543, #9336, #2631, #10458, #3747, #11588, #4851, #12691, #5985, #13790 ), + ( #7111, #499, #8261, #1586, #9383, #2679, #10508, #3794, #11636, #4896, #12739, #6034, #13841, #7159, #543, #8315, #1632, #9428, #2732, #10562, #3840, #11683, #4947, #12786, #6076, #13885, #7203, #583, #8358, #1681 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 4, 2, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 1, 2, 4 ), + ( 0.0000000000000000000, 0.01578425090104713200, 0.03156850180209426500, 0.06313700360418853000, 0.1262740072083770600, 0.1894110108125655900, 0.2209795126146598700, 0.2525480144167541200, 0.2602759702572779400, 0.3143716611409447800, 0.3761953078651354400, 0.4380189545893261000, 0.4689307779514214600, 0.4998426013135167700, 0.5311368631043980000, 0.5624311248952791300, 0.6250196484770416100, 0.6876081720588040900, 0.7189024338496852200, 0.7501966956405664600, 0.7814221086854955500, 0.8126475217304247600, 0.8750983478202831700, 0.9375491739101415900, 0.9687745869550707900, 1.000000000000000000 ), + ( 0.0000000000000000000, 0.001953125000000000000, 0.03125000000000000000, 0.06250000000000000000, 0.1250000000000000000, 0.2500000000000000000, 0.3750000000000000000, 0.4375000000000000000, 0.5000000000000000000, 0.5625000000000000000, 0.6250000000000000000, 0.7500000000000000000, 0.8750000000000000000, 0.9375000000000000000, 0.9687500000000000000, 0.9980468750000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#5563 = CARTESIAN_POINT ( 'NONE', ( 22.40557478599585300, -19.87093624336284800, 23.25948761544214000 ) ) ; +#5564 = VERTEX_POINT ( 'NONE', #10544 ) ; +#5565 = CARTESIAN_POINT ( 'NONE', ( 36.38981428386927100, -23.25305993131139500, 13.23676343042875000 ) ) ; +#5566 = CARTESIAN_POINT ( 'NONE', ( 5.115156363474716800, -29.88939822491618500, 24.85287095365680400 ) ) ; +#5567 = CARTESIAN_POINT ( 'NONE', ( 2.497484527968236300, -10.00000000000014000, 20.47431314313049800 ) ) ; +#5568 = CARTESIAN_POINT ( 'NONE', ( 29.59286222406324300, -95.07596123493891600, 15.72863494349823900 ) ) ; +#5569 = CARTESIAN_POINT ( 'NONE', ( 36.38467725029091300, -10.00000000000000000, 21.82392101689064000 ) ) ; +#5570 = VERTEX_POINT ( 'NONE', #11667 ) ; +#5571 = CARTESIAN_POINT ( 'NONE', ( 17.43197196179443900, -19.90811152822361800, 23.25289388203974300 ) ) ; +#5572 = CARTESIAN_POINT ( 'NONE', ( 2.625083206553386000, -29.53471339938765900, 21.93502066501617500 ) ) ; +#5573 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11319, #3472, #5702, #13522, #6828, #223, #7972, #1308, #9107, #2403, #10233, #3517 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002039315097803078400, 0.004078630195606156900, 0.006117945293409234900, 0.007137602842310772200, 0.008157260391212308600 ), + .UNSPECIFIED. ) ; +#5574 = CARTESIAN_POINT ( 'NONE', ( 31.92107555992801300, -97.47441179282185400, 20.42563285959301200 ) ) ; +#5575 = CARTESIAN_POINT ( 'NONE', ( 31.66273710186959900, -30.61417877496676000, 26.84937303342970700 ) ) ; +#5576 = CARTESIAN_POINT ( 'NONE', ( 26.54636226068685500, -30.34823681503196000, 25.95592078411357700 ) ) ; +#5577 = CARTESIAN_POINT ( 'NONE', ( 28.83716909122772500, -30.80704229462142900, 27.91122362369569700 ) ) ; +#5578 = CARTESIAN_POINT ( 'NONE', ( 37.43249937522270400, -29.49995988359969000, 21.71498420974053200 ) ) ; +#5579 = ORIENTED_EDGE ( 'NONE', *, *, #14312, .F. ) ; +#5580 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#5581 = CARTESIAN_POINT ( 'NONE', ( 6.961511613975079400, -12.50000000000001200, -17.21444838965191000 ) ) ; +#5582 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5583 = CARTESIAN_POINT ( 'NONE', ( 3.967112559734394100, -29.19726287092314000, 23.19228527197651200 ) ) ; +#5584 = VERTEX_POINT ( 'NONE', #12771 ) ; +#5585 = CARTESIAN_POINT ( 'NONE', ( 14.07482871757271200, -9.904267923131005300, 25.49953701147113700 ) ) ; +#5586 = CARTESIAN_POINT ( 'NONE', ( 24.47104975561886800, -12.50000000000002700, -13.55853822863051200 ) ) ; +#5587 = CARTESIAN_POINT ( 'NONE', ( 12.14401581384276200, -38.92038764229495500, 18.90744411550686600 ) ) ; +#5588 = CARTESIAN_POINT ( 'NONE', ( 34.37027795670590500, -30.63907564852541300, 25.16175408310681000 ) ) ; +#5589 = EDGE_LOOP ( 'NONE', ( #13282, #2138, #2813, #13624 ) ) ; +#5590 = CARTESIAN_POINT ( 'NONE', ( 28.56836096630430400, -12.49999999999931100, 20.49617362199272100 ) ) ; +#5591 = CARTESIAN_POINT ( 'NONE', ( 33.66217672090243700, -30.57000049255411200, 25.71273069772089700 ) ) ; +#5592 = APPROVAL_ROLE ( '' ) ; +#5593 = CARTESIAN_POINT ( 'NONE', ( 5.279622330003434200, -19.99048767692681800, 16.85421467652572500 ) ) ; +#5594 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -14.31000000000000400 ) ) ; +#5595 = CARTESIAN_POINT ( 'NONE', ( 34.19012155064429900, -36.09185915021925700, 14.72552171518772600 ) ) ; +#5596 = CARTESIAN_POINT ( 'NONE', ( 7.096720649618719200, -31.16440994647458900, 25.84625289401818200 ) ) ; +#5597 = CARTESIAN_POINT ( 'NONE', ( 34.68671926839810700, -100.0000000000000100, -3.238776261381144800 ) ) ; +#5598 = ORIENTED_EDGE ( 'NONE', *, *, #8108, .T. ) ; +#5599 = CARTESIAN_POINT ( 'NONE', ( 2.588774780589600900, -91.17400739771180400, -1.749716076299997900 ) ) ; +#5600 = EDGE_CURVE ( 'NONE', #5247, #635, #10566, .T. ) ; +#5601 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7655, #12072, #2101, #9926, #3212, #11053, #4327, #12163, #5426, #13270, #6563, #14360, #7701, #1053 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003841791491976244200, 0.005762687237964369400, 0.007683582983952493700, 0.01152537447592873900, 0.01344627022191686100, 0.01536716596790498400 ), + .UNSPECIFIED. ) ; +#5602 = CARTESIAN_POINT ( 'NONE', ( 13.02719259540784300, -33.06432143316443700, 26.06946148843550000 ) ) ; +#5603 = CARTESIAN_POINT ( 'NONE', ( 34.92055594107598900, -100.0000000000000100, -27.29398733170707600 ) ) ; +#5604 = CARTESIAN_POINT ( 'NONE', ( 37.60191067730718800, -19.58552465119150200, 8.063391000878677800 ) ) ; +#5605 = ORIENTED_EDGE ( 'NONE', *, *, #6373, .T. ) ; +#5606 = CARTESIAN_POINT ( 'NONE', ( 29.75927950769586500, -30.89796050185054800, 27.59036909751549200 ) ) ; +#5607 = FACE_OUTER_BOUND ( 'NONE', #5019, .T. ) ; +#5608 = CARTESIAN_POINT ( 'NONE', ( 2.716249875930603500, -28.57287779014423300, 17.42932465555747600 ) ) ; +#5609 = CARTESIAN_POINT ( 'NONE', ( 8.933468720598359200, -30.83048029029744100, 27.07875684383096300 ) ) ; +#5610 = CARTESIAN_POINT ( 'NONE', ( 35.78821223471477700, -30.71079234741074500, 23.48943619577248800 ) ) ; +#5611 = AXIS2_PLACEMENT_3D ( 'NONE', #14026, #9569, #5089 ) ; +#5612 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5613 = ADVANCED_FACE ( 'NONE', ( #130 ), #13872, .F. ) ; +#5614 = ORIENTED_EDGE ( 'NONE', *, *, #7339, .F. ) ; +#5615 = CARTESIAN_POINT ( 'NONE', ( 5.524854264364711800, -31.10265840910796300, 24.52153556444312000 ) ) ; +#5616 = CARTESIAN_POINT ( 'NONE', ( 2.500187520530152300, -21.22229933567643900, 7.877582694835312300 ) ) ; +#5617 = VECTOR ( 'NONE', #12998, 1000.000000000000000 ) ; +#5618 = PLANE ( 'NONE', #6581 ) ; +#5619 = CARTESIAN_POINT ( 'NONE', ( 17.50816190870301600, -33.35180196542444300, 26.50734624295223800 ) ) ; +#5620 = ORIENTED_EDGE ( 'NONE', *, *, #11317, .T. ) ; +#5621 = EDGE_CURVE ( 'NONE', #12521, #12759, #460, .T. ) ; +#5622 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -18.70000000000001400 ) ) ; +#5623 = CARTESIAN_POINT ( 'NONE', ( 3.676724236118906800, -30.66059900155805100, 21.91634669078289100 ) ) ; +#5624 = FACE_OUTER_BOUND ( 'NONE', #5155, .T. ) ; +#5625 = CARTESIAN_POINT ( 'NONE', ( 22.43866206969477900, -30.66176281334873400, 28.85677374700786000 ) ) ; +#5626 = CARTESIAN_POINT ( 'NONE', ( 31.62551806156006900, -31.09358372802206500, 26.68646870807197800 ) ) ; +#5627 = CARTESIAN_POINT ( 'NONE', ( 28.83674083520185900, -30.82200251755481100, 27.90871047119154400 ) ) ; +#5628 = CARTESIAN_POINT ( 'NONE', ( 36.52443148951554300, -30.53308488025100700, 21.53222213339304500 ) ) ; +#5629 = CARTESIAN_POINT ( 'NONE', ( 15.20557420244628900, -12.50000000000004800, -12.99598171080493000 ) ) ; +#5630 = CARTESIAN_POINT ( 'NONE', ( 15.10722738673296400, -12.50000000000000200, 8.311101299443754100 ) ) ; +#5631 = AXIS2_PLACEMENT_3D ( 'NONE', #5143, #12980, #6267 ) ; +#5632 = CARTESIAN_POINT ( 'NONE', ( 4.099484160167025800, -30.76466752480520800, 23.12604399181727300 ) ) ; +#5633 = FACE_BOUND ( 'NONE', #3850, .T. ) ; +#5634 = ORIENTED_EDGE ( 'NONE', *, *, #9211, .T. ) ; +#5635 = VECTOR ( 'NONE', #5516, 1000.000000000000000 ) ; +#5636 = CARTESIAN_POINT ( 'NONE', ( 6.504119265815381500, -10.00000000000000400, 21.88316959378730100 ) ) ; +#5637 = CARTESIAN_POINT ( 'NONE', ( 30.52661470015109700, -21.17046433820073800, -21.49812605887924000 ) ) ; +#5638 = CARTESIAN_POINT ( 'NONE', ( 4.571552344654739900, -34.63255565472212500, 13.15245032503496100 ) ) ; +#5639 = CARTESIAN_POINT ( 'NONE', ( 33.99344582381518600, -29.49940664603205000, 25.24554849166006000 ) ) ; +#5640 = EDGE_LOOP ( 'NONE', ( #7208, #5064 ) ) ; +#5641 = CARTESIAN_POINT ( 'NONE', ( 23.65557978133792700, -12.50000000000002500, 9.849722044157180900 ) ) ; +#5642 = EDGE_CURVE ( 'NONE', #11912, #11411, #6844, .T. ) ; +#5643 = CARTESIAN_POINT ( 'NONE', ( 33.41853116105668400, -29.65171649795909700, 25.71303105118095200 ) ) ; +#5644 = CARTESIAN_POINT ( 'NONE', ( 6.248203687145990100, -20.38410310971461600, 18.02291668580308900 ) ) ; +#5645 = CARTESIAN_POINT ( 'NONE', ( 22.60306456692113700, -19.87568216611861200, 23.25829123793067400 ) ) ; +#5646 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -39.52045731841470700, 19.79474689191102500 ) ) ; +#5647 = CARTESIAN_POINT ( 'NONE', ( 6.977978146193169800, -30.56853149865743500, 26.13889842721092200 ) ) ; +#5648 = CARTESIAN_POINT ( 'NONE', ( 28.80424908285671000, -100.0000000000000100, 4.900729108231353800 ) ) ; +#5649 = CYLINDRICAL_SURFACE ( 'NONE', #6547, 3.189999999999995100 ) ; +#5650 = VERTEX_POINT ( 'NONE', #12821 ) ; +#5651 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, 51.02052347080197600, 0.9909638431422827000 ) ) ; +#5652 = CARTESIAN_POINT ( 'NONE', ( 7.123286907560977700, -30.08976638952704300, 26.44085698362068400 ) ) ; +#5653 = CARTESIAN_POINT ( 'NONE', ( 10.48300959960522100, -10.78597681221420100, -25.04035694750030300 ) ) ; +#5654 = AXIS2_PLACEMENT_3D ( 'NONE', #6940, #334, #8088 ) ; +#5655 = CARTESIAN_POINT ( 'NONE', ( 37.79409340714640600, -18.80346758739391400, 8.340865794125678100 ) ) ; +#5656 = ORIENTED_EDGE ( 'NONE', *, *, #3264, .T. ) ; +#5657 = CARTESIAN_POINT ( 'NONE', ( 29.55525552103356500, -30.70342146780410500, 27.69912213387494400 ) ) ; +#5658 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992900, -27.11438205369689700, 6.909191562393127500 ) ) ; +#5659 = CARTESIAN_POINT ( 'NONE', ( 8.938984260787080400, -30.43627082934821700, 27.13566406039713600 ) ) ; +#5660 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12501, #9091, #5785 ), + ( #13594, #6910, #303 ), + ( #8054, #1392, #9191 ), + ( #2485, #10302, #3599 ), + ( #11444, #4705, #12543 ), + ( #5837, #13644, #6957 ), + ( #349, #8105, #1437 ), + ( #9234, #2534, #10350 ), + ( #3641, #11489, #4755 ), + ( #12589, #5881, #13696 ), + ( #7009, #395, #8159 ), + ( #1492, #9283, #2581 ), + ( #10404, #3692, #11538 ), + ( #4802, #12637, #5928 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0004572459325053811300, 0.003484838554946654700, 0.004998634866167291600, 0.006512431177387928100, 0.008026227488608563700, 0.009540023799829201000, 0.01256761642227047600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7839037970967482900, 1.000000000000000000), + ( 1.000000000000000000, 0.7775858699909253800, 1.000000000000000000), + ( 1.000000000000000000, 0.7707346577156537500, 1.000000000000000000), + ( 1.000000000000000000, 0.7595241015150422400, 1.000000000000000000), + ( 1.000000000000000000, 0.7556065527483117900, 1.000000000000000000), + ( 1.000000000000000000, 0.7475455865546905000, 1.000000000000000000), + ( 1.000000000000000000, 0.7434139113204404300, 1.000000000000000000), + ( 1.000000000000000000, 0.7349209616079858100, 1.000000000000000000), + ( 1.000000000000000000, 0.7305598040199637900, 1.000000000000000000), + ( 1.000000000000000000, 0.7215696658676159500, 1.000000000000000000), + ( 1.000000000000000000, 0.7169150337986014400, 1.000000000000000000), + ( 1.000000000000000000, 0.7026688094595853200, 1.000000000000000000), + ( 1.000000000000000000, 0.6928659797943380600, 1.000000000000000000), + ( 1.000000000000000000, 0.6825647384485982200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5661 = CARTESIAN_POINT ( 'NONE', ( 35.57721200191668500, -29.26562851980686700, 23.75578171707972400 ) ) ; +#5662 = CARTESIAN_POINT ( 'NONE', ( 26.84752224756304500, -28.08124121815344800, 26.96588792518211600 ) ) ; +#5663 = CIRCLE ( 'NONE', #6565, 2.499999999999999600 ) ; +#5664 = EDGE_CURVE ( 'NONE', #635, #11059, #3885, .T. ) ; +#5665 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -21.17506671135420900, 30.64523381671439500 ) ) ; +#5666 = CARTESIAN_POINT ( 'NONE', ( 5.224022899966838600, -30.22643815706013000, 25.00808674988618600 ) ) ; +#5667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669238900, -0.9848077530122091300 ) ) ; +#5668 = CARTESIAN_POINT ( 'NONE', ( 6.600337926272198200, -23.34865637111452600, 13.65073588304347600 ) ) ; +#5669 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#5670 = DIRECTION ( 'NONE', ( 6.938893903907227400E-016, -1.630640067418198400E-014, 1.000000000000000000 ) ) ; +#5671 = VERTEX_POINT ( 'NONE', #612 ) ; +#5672 = CARTESIAN_POINT ( 'NONE', ( 2.641186613089755200, -29.90721151565718800, 22.02341808572024500 ) ) ; +#5673 = CARTESIAN_POINT ( 'NONE', ( 20.78286902630958400, -28.74563066253352200, 29.19463954378694100 ) ) ; +#5674 = CARTESIAN_POINT ( 'NONE', ( 31.56036938510800700, -30.49084265333498700, 26.91024526463616300 ) ) ; +#5675 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5676 = CARTESIAN_POINT ( 'NONE', ( 28.83717013743385500, -30.83580382245866500, 27.90615188560240200 ) ) ; +#5677 = CARTESIAN_POINT ( 'NONE', ( 36.96938813571952700, -29.13134143370503200, 21.84290019135076800 ) ) ; +#5678 = CARTESIAN_POINT ( 'NONE', ( 26.32877084911552900, -27.29202009547118400, 21.46266711381721100 ) ) ; +#5679 = CARTESIAN_POINT ( 'NONE', ( 5.661072779768627300, -23.05587788864235300, 11.55318941858615700 ) ) ; +#5680 = CARTESIAN_POINT ( 'NONE', ( 8.209287322210789400, -12.52868684875407900, -24.58250422548923500 ) ) ; +#5681 = CARTESIAN_POINT ( 'NONE', ( 3.759307597161753100, -29.64568273524117400, 23.44178475967484600 ) ) ; +#5682 = EDGE_CURVE ( 'NONE', #5564, #5737, #7020, .T. ) ; +#5683 = CARTESIAN_POINT ( 'NONE', ( 3.344071876781114800, -19.85336026735900100, 13.17613830234575700 ) ) ; +#5684 = ADVANCED_FACE ( 'NONE', ( #6837 ), #5002, .T. ) ; +#5685 = CARTESIAN_POINT ( 'NONE', ( 29.50127514021366100, -12.49999999999991100, -20.80063421857732900 ) ) ; +#5686 = CARTESIAN_POINT ( 'NONE', ( 2.501065529352971800, -27.30757075486947700, 6.926512319299854800 ) ) ; +#5687 = CARTESIAN_POINT ( 'NONE', ( 34.21987949698349500, -30.41279596366552700, 25.37203734263327000 ) ) ; +#5688 = CARTESIAN_POINT ( 'NONE', ( 28.70717527104640600, -24.00620754320458500, 18.35176174513106100 ) ) ; +#5689 = CARTESIAN_POINT ( 'NONE', ( 33.57615369931505000, -30.38477345943452000, 25.81382188909911000 ) ) ; +#5690 = CARTESIAN_POINT ( 'NONE', ( 10.85507902948968400, -30.82466636186708100, 27.81349046728016800 ) ) ; +#5691 = CARTESIAN_POINT ( 'NONE', ( 8.278144646043312300, -19.10224198914433600, 20.30227084804973400 ) ) ; +#5692 = CARTESIAN_POINT ( 'NONE', ( 25.64486289138402600, -25.71508572135430300, 21.89512088197228600 ) ) ; +#5693 = CARTESIAN_POINT ( 'NONE', ( 24.98061662877020300, -12.50000000000007500, -12.30463517886665600 ) ) ; +#5694 = CARTESIAN_POINT ( 'NONE', ( 7.091072875118571000, -29.81450712891236100, 26.09320400752919500 ) ) ; +#5695 = CARTESIAN_POINT ( 'NONE', ( 35.82073743793778000, -7.500000000000000000, 22.36143813341940500 ) ) ; +#5696 = AXIS2_PLACEMENT_3D ( 'NONE', #12831, #11770, #5035 ) ; +#5697 = CARTESIAN_POINT ( 'NONE', ( 39.95261978475498000, -10.18952086098016400, 11.15616962984336900 ) ) ; +#5698 = CARTESIAN_POINT ( 'NONE', ( 2.862191146247367700, -30.60265973878443900, 23.42187989377797000 ) ) ; +#5699 = CARTESIAN_POINT ( 'NONE', ( 8.446176078053016000, -11.87833390461004500, 22.67289845996079800 ) ) ; +#5700 = ORIENTED_EDGE ( 'NONE', *, *, #8653, .F. ) ; +#5701 = CARTESIAN_POINT ( 'NONE', ( 37.45200903619662100, -21.12779170444004300, 9.049247359975002100 ) ) ; +#5702 = CARTESIAN_POINT ( 'NONE', ( 13.68849068020775300, -12.96971184458374000, 24.47635967687040200 ) ) ; +#5703 = CARTESIAN_POINT ( 'NONE', ( 9.042795718260482100, -30.98182154404889100, 27.07269863564933800 ) ) ; +#5704 = CARTESIAN_POINT ( 'NONE', ( 35.94805955950120300, -30.33484396565171800, 23.80964781544155100 ) ) ; +#5705 = CARTESIAN_POINT ( 'NONE', ( 32.91604168421221700, -31.01843651754652200, 26.21734766410515100 ) ) ; +#5706 = EDGE_CURVE ( 'NONE', #13632, #10086, #6545, .T. ) ; +#5707 = VECTOR ( 'NONE', #2715, 1000.000000000000000 ) ; +#5708 = CARTESIAN_POINT ( 'NONE', ( 24.30558009522473000, -18.53890499850219000, 23.46939260725548200 ) ) ; +#5709 = CARTESIAN_POINT ( 'NONE', ( 5.538067540203313000, -29.37419849365135200, 24.81134512405146700 ) ) ; +#5710 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5711 = ORIENTED_EDGE ( 'NONE', *, *, #12492, .F. ) ; +#5712 = CARTESIAN_POINT ( 'NONE', ( 6.189837490200401900, -12.49999999999989700, 14.98866146129456700 ) ) ; +#5713 = CARTESIAN_POINT ( 'NONE', ( 0.4591031464831149000, -11.83641258593238800, 8.146004636750866700 ) ) ; +#5714 = CARTESIAN_POINT ( 'NONE', ( 34.59997665579562900, -29.59716256594335300, 25.48939590599629300 ) ) ; +#5715 = AXIS2_PLACEMENT_3D ( 'NONE', #7190, #8343, #1665 ) ; +#5716 = CARTESIAN_POINT ( 'NONE', ( 3.645815862173301900, -28.93521368931835600, 22.21906435404127900 ) ) ; +#5717 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 5.018561128876299000, -19.99999999999999600 ) ) ; +#5718 = CARTESIAN_POINT ( 'NONE', ( 16.00664919057089000, -31.29892962639993600, 28.74442404665491000 ) ) ; +#5719 = CARTESIAN_POINT ( 'NONE', ( 31.54307058156102900, -30.99024258910820600, 26.78497890770840300 ) ) ; +#5720 = CARTESIAN_POINT ( 'NONE', ( 30.02785917592320400, -10.67829839517917300, -24.99999999999999600 ) ) ; +#5721 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457651600, -30.82655086342983700, 27.93782961424065500 ) ) ; +#5722 = CARTESIAN_POINT ( 'NONE', ( 36.96941209280515700, -30.33487364241235800, 21.63043255926434600 ) ) ; +#5723 = CYLINDRICAL_SURFACE ( 'NONE', #3426, 10.00000000000000000 ) ; +#5724 = CARTESIAN_POINT ( 'NONE', ( 32.78865944368946800, -28.77563869528127700, 26.20272658498976500 ) ) ; +#5725 = CARTESIAN_POINT ( 'NONE', ( 5.373250326930286900, -12.49999999999958600, 12.87678382058403200 ) ) ; +#5726 = CARTESIAN_POINT ( 'NONE', ( 3.621381521585936600, -30.62166641341219300, 21.75485388254736900 ) ) ; +#5727 = ORIENTED_EDGE ( 'NONE', *, *, #12764, .T. ) ; +#5728 = EDGE_CURVE ( 'NONE', #13983, #10169, #6708, .T. ) ; +#5729 = CARTESIAN_POINT ( 'NONE', ( 4.480069338750323200, -30.95335458553779200, 23.28704249632777100 ) ) ; +#5730 = CARTESIAN_POINT ( 'NONE', ( 18.67688643591764800, -19.56721780428151200, 23.26608805034666700 ) ) ; +#5731 = CARTESIAN_POINT ( 'NONE', ( 23.89731236682695200, -12.49999999999999300, -14.10956366541194000 ) ) ; +#5732 = CARTESIAN_POINT ( 'NONE', ( 36.99916710599544000, -96.03959443500166100, 12.92977595461171200 ) ) ; +#5733 = CARTESIAN_POINT ( 'NONE', ( 33.99289862920718300, -31.15386135067754800, 24.95312061834256000 ) ) ; +#5734 = AXIS2_PLACEMENT_3D ( 'NONE', #9778, #3073, #10917 ) ; +#5735 = CARTESIAN_POINT ( 'NONE', ( 30.28246788278882900, -12.50000000000000500, 19.35532103785099900 ) ) ; +#5736 = CARTESIAN_POINT ( 'NONE', ( 33.42600982267465800, -31.15113204976379900, 25.45956684214160100 ) ) ; +#5737 = VERTEX_POINT ( 'NONE', #1965 ) ; +#5738 = CARTESIAN_POINT ( 'NONE', ( 10.85440997849124000, -30.75874681806104100, 27.82440531999727900 ) ) ; +#5739 = CARTESIAN_POINT ( 'NONE', ( 10.02856985381187200, -19.45657581534461800, 21.33829443876806700 ) ) ; +#5740 = CARTESIAN_POINT ( 'NONE', ( 37.79857499854667700, -18.80570000581315100, 7.788262581895397200 ) ) ; +#5741 = CARTESIAN_POINT ( 'NONE', ( 34.74781580789408500, -22.15384348232053200, -14.45615303586602700 ) ) ; +#5742 = CARTESIAN_POINT ( 'NONE', ( 7.281888828286920300, -30.79238787805845900, 26.23508780963585700 ) ) ; +#5743 = CARTESIAN_POINT ( 'NONE', ( 5.000000007721785900, -95.07596123493894400, 12.92967538968970900 ) ) ; +#5744 = PLANE ( 'NONE', #1098 ) ; +#5745 = DIRECTION ( 'NONE', ( 0.9571552693901009800, -0.2895751893356253700, 0.0000000000000000000 ) ) ; +#5746 = CARTESIAN_POINT ( 'NONE', ( 0.5470579997472816400, -11.89109919232474700, 9.841703338208402500 ) ) ; +#5747 = VERTEX_POINT ( 'NONE', #14227 ) ; +#5748 = EDGE_CURVE ( 'NONE', #7720, #10101, #101, .T. ) ; +#5749 = CARTESIAN_POINT ( 'NONE', ( 37.32615751659396600, -20.29273521933772200, 10.32239583689429800 ) ) ; +#5750 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, -22.03500000000001400, 7.646505608887537200 ) ) ; +#5751 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5752 = CARTESIAN_POINT ( 'NONE', ( 9.029827724863233500, -30.61623051935795200, 27.16683749350033100 ) ) ; +#5753 = CARTESIAN_POINT ( 'NONE', ( 35.32181409500520900, -29.16219911336526500, 23.86525860882981200 ) ) ; +#5754 = EDGE_LOOP ( 'NONE', ( #7781, #10568, #9547, #11805 ) ) ; +#5755 = CARTESIAN_POINT ( 'NONE', ( 36.12103487499146600, -29.35200639261541200, 24.48244197127268200 ) ) ; +#5756 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #10936, #8672, #12035, #5309 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.662022480839816700, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9101547199502736400, 0.9101547199502736400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#5757 = ADVANCED_FACE ( 'NONE', ( #6371 ), #4414, .T. ) ; +#5758 = CARTESIAN_POINT ( 'NONE', ( 25.42012676774522700, -16.22384819984708700, 23.90256763852765700 ) ) ; +#5759 = CARTESIAN_POINT ( 'NONE', ( 5.603047906089002200, -30.50268943265241400, 25.21627414878659200 ) ) ; +#5760 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.23263195269510100, -11.60422004054820800 ) ) ; +#5761 = ORIENTED_EDGE ( 'NONE', *, *, #12046, .T. ) ; +#5762 = CARTESIAN_POINT ( 'NONE', ( 15.46815155336316400, -12.50000000000002000, 9.066012385746438100 ) ) ; +#5763 = CARTESIAN_POINT ( 'NONE', ( 40.00000001105099300, -10.00000000000000400, -11.53324907983974200 ) ) ; +#5764 = CARTESIAN_POINT ( 'NONE', ( 31.25886731347757000, -32.32726662405711700, 26.78288862936396700 ) ) ; +#5765 = CARTESIAN_POINT ( 'NONE', ( 3.000932960802810400, -30.29291574208392700, 22.06930677405484400 ) ) ; +#5766 = EDGE_CURVE ( 'NONE', #13456, #5747, #6669, .T. ) ; +#5767 = CARTESIAN_POINT ( 'NONE', ( 17.54780863032567200, -25.57104198383032700, 22.25482217907983100 ) ) ; +#5768 = VERTEX_POINT ( 'NONE', #10553 ) ; +#5769 = CARTESIAN_POINT ( 'NONE', ( 31.34961253332657800, -30.32195634830280200, 27.00281834295488500 ) ) ; +#5770 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457651600, -30.82655086342983400, 27.93782961424065500 ) ) ; +#5771 = CARTESIAN_POINT ( 'NONE', ( 36.48102579723665400, -28.93163812519361100, 21.99554983658795500 ) ) ; +#5772 = CARTESIAN_POINT ( 'NONE', ( 14.24166765707604100, -22.03500000000001400, 19.94495815288057400 ) ) ; +#5773 = CARTESIAN_POINT ( 'NONE', ( 32.23518257892986600, -20.70415396077727600, 19.47747828580715900 ) ) ; +#5774 = ORIENTED_EDGE ( 'NONE', *, *, #7746, .T. ) ; +#5775 = CARTESIAN_POINT ( 'NONE', ( 4.987531703562027900, -31.05420189117019400, 23.91215559891967900 ) ) ; +#5776 = FACE_BOUND ( 'NONE', #9105, .T. ) ; +#5777 = CARTESIAN_POINT ( 'NONE', ( 3.921957905441899600, -30.04107330725037500, 23.76993242081200500 ) ) ; +#5778 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #907, #13176 ), + ( #14266, #7602 ), + ( #953, #8742 ), + ( #2052, #9870 ), + ( #3160, #11007 ), + ( #4279, #12106 ), + ( #5379, #13218 ), + ( #6510, #14309 ), + ( #7648, #1002 ), + ( #8788, #2092 ), + ( #9919, #3205 ), + ( #11045, #4319 ), + ( #12153, #5418 ), + ( #13261, #6554 ), + ( #14354, #7693 ), + ( #1045, #8835 ), + ( #2133, #9955 ), + ( #3245, #11088 ), + ( #4362, #12195 ), + ( #5466, #13302 ), + ( #6598, #2 ), + ( #7741, #1088 ), + ( #8879, #2179 ), + ( #9999, #3286 ), + ( #11134, #4405 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1250000000000006900, 0.1875000000000009200, 0.2500000000000011700, 0.3750000000000012800, 0.4375000000000011700, 0.5000000000000010000, 0.6250000000000014400, 0.6875000000000016700, 0.7500000000000014400, 0.8125000000000012200, 0.8750000000000008900, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#5779 = CARTESIAN_POINT ( 'NONE', ( 22.35077160798175200, -19.56487473887292700, 23.34870917541504200 ) ) ; +#5780 = CARTESIAN_POINT ( 'NONE', ( 17.51745388278408200, -19.90681428659154800, 23.25324405112495200 ) ) ; +#5781 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -7.511547099454119800, 20.00000000000000000 ) ) ; +#5782 = CARTESIAN_POINT ( 'NONE', ( 19.22906461172013300, -30.62972029616883400, 28.86242370731649100 ) ) ; +#5783 = ORIENTED_EDGE ( 'NONE', *, *, #13481, .F. ) ; +#5784 = CARTESIAN_POINT ( 'NONE', ( 29.16318844539469500, -21.03217192321030600, -22.48614211502526700 ) ) ; +#5785 = CARTESIAN_POINT ( 'NONE', ( 37.81486673790828900, -11.92747418448650300, -19.08876031342176900 ) ) ; +#5786 = CARTESIAN_POINT ( 'NONE', ( 33.93113911112716600, -30.23163657971343500, 25.57859712628371100 ) ) ; +#5787 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2919, #10761, #11871, #5144, #12981, #6269, #14082, #7410, #771, #8553, #1874, #9683, #2973, #10817, #4088, #11922, #5197, #13039 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.006989366889764404800, 0.007904687594134290900, 0.008362347946319230500, 0.008591178122411700200, 0.008705593210457933400, 0.008762800754481051700, 0.008791404526492612600, 0.008805706412498396500, 0.008820008298504178700 ), + .UNSPECIFIED. ) ; +#5788 = CARTESIAN_POINT ( 'NONE', ( 23.89373653724292300, -12.50000000000002300, 9.703852414625926000 ) ) ; +#5789 = CARTESIAN_POINT ( 'NONE', ( 33.36697071877696200, -30.16434989690121100, 25.93503002629692500 ) ) ; +#5790 = EDGE_LOOP ( 'NONE', ( #1366, #6038, #2566, #14083, #11158 ) ) ; +#5791 = CARTESIAN_POINT ( 'NONE', ( 11.05996771278651800, -30.83891063023211400, 27.87455754336279400 ) ) ; +#5792 = CARTESIAN_POINT ( 'NONE', ( 11.39692735109010100, -19.75203196866611300, 21.97188982702185500 ) ) ; +#5793 = CARTESIAN_POINT ( 'NONE', ( 2.048925496360194400, -11.90489205978572500, -18.81572701578140200 ) ) ; +#5794 = CARTESIAN_POINT ( 'NONE', ( 34.29653139756232600, -12.49999999999941000, -14.73290485245727900 ) ) ; +#5795 = FACE_BOUND ( 'NONE', #12712, .T. ) ; +#5796 = CARTESIAN_POINT ( 'NONE', ( 5.154745007312855300, -22.77727300691609400, 9.550773384218461000 ) ) ; +#5797 = EDGE_CURVE ( 'NONE', #6970, #4366, #6201, .T. ) ; +#5798 = CARTESIAN_POINT ( 'NONE', ( 13.99953127095436200, -20.01384545781222000, 22.81373943744310800 ) ) ; +#5799 = CARTESIAN_POINT ( 'NONE', ( 24.50911524893231800, -12.50000000000002500, 9.134250957360658100 ) ) ; +#5800 = CARTESIAN_POINT ( 'NONE', ( 37.79875055962731500, -18.80499776149059300, -11.53187062879839800 ) ) ; +#5801 = ORIENTED_EDGE ( 'NONE', *, *, #3920, .F. ) ; +#5802 = CARTESIAN_POINT ( 'NONE', ( 37.11753146610695400, -19.54862004154043100, 11.84465792456774500 ) ) ; +#5803 = CARTESIAN_POINT ( 'NONE', ( 2.185133262090871700, -11.92747418448642800, -19.08876031342025200 ) ) ; +#5804 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -17.49999999999999600 ) ) ; +#5805 = CARTESIAN_POINT ( 'NONE', ( 9.243809169349161100, -31.01909669678530100, 27.14742527452764500 ) ) ; +#5806 = CARTESIAN_POINT ( 'NONE', ( 35.80987171804084600, -30.10017577931877500, 24.08925563692629300 ) ) ; +#5807 = ORIENTED_EDGE ( 'NONE', *, *, #6783, .F. ) ; +#5808 = CARTESIAN_POINT ( 'NONE', ( 11.26586904079728800, -30.82654731345162700, 27.93780948131385200 ) ) ; +#5809 = CYLINDRICAL_SURFACE ( 'NONE', #9089, 14.99999999999999800 ) ; +#5810 = CARTESIAN_POINT ( 'NONE', ( 26.51292862228836000, -12.33075865461240300, 24.58902436367209200 ) ) ; +#5811 = CARTESIAN_POINT ( 'NONE', ( 5.819005201316261200, -29.51856598606710600, 25.12838556587262300 ) ) ; +#5812 = CARTESIAN_POINT ( 'NONE', ( -1.952032974235067500, -10.00000000000000400, 7.923893973014100900 ) ) ; +#5813 = CARTESIAN_POINT ( 'NONE', ( 25.10673806135142900, -33.23352796647962700, 26.37022722391084500 ) ) ; +#5814 = CARTESIAN_POINT ( 'NONE', ( 17.67409979068792200, -9.999999999999998200, -29.34296677226984000 ) ) ; +#5815 = EDGE_CURVE ( 'NONE', #5375, #13997, #4822, .T. ) ; +#5816 = CARTESIAN_POINT ( 'NONE', ( 3.296497394244682700, -29.13115002881907100, 22.27628609537473300 ) ) ; +#5817 = VECTOR ( 'NONE', #1979, 1000.000000000000000 ) ; +#5818 = ORIENTED_EDGE ( 'NONE', *, *, #8917, .F. ) ; +#5819 = CARTESIAN_POINT ( 'NONE', ( 31.36400770366660500, -30.79512213797827500, 26.95121268269678100 ) ) ; +#5820 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -2.500000000000016900, 25.00105000000004200 ) ) ; +#5821 = CARTESIAN_POINT ( 'NONE', ( 37.39483372346869300, -29.97753417612181800, 21.80377704589202600 ) ) ; +#5822 = CARTESIAN_POINT ( 'NONE', ( 9.846286255644304900, -100.0000000000000100, 3.973589276607472500 ) ) ; +#5823 = CARTESIAN_POINT ( 'NONE', ( 33.07516025900539300, -26.59678646544435700, 17.75920949217406500 ) ) ; +#5824 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#5825 = CARTESIAN_POINT ( 'NONE', ( 7.096720649618719200, -31.16440994647458900, 25.84625289401818200 ) ) ; +#5826 = AXIS2_PLACEMENT_3D ( 'NONE', #13923, #7248, #623 ) ; +#5827 = CARTESIAN_POINT ( 'NONE', ( 4.481291314044532300, -29.11560724035755100, 23.61050540890339300 ) ) ; +#5828 = CARTESIAN_POINT ( 'NONE', ( 27.64635582251169800, -11.71232306770333100, -25.30192875652547400 ) ) ; +#5829 = CARTESIAN_POINT ( 'NONE', ( 36.97131799463245700, -19.88192920266437700, 12.16874108319702700 ) ) ; +#5830 = CARTESIAN_POINT ( 'NONE', ( 11.76044685354238900, -9.781278341185204900, -24.99999999999999600 ) ) ; +#5831 = LINE ( 'NONE', #11235, #5635 ) ; +#5832 = PLANE ( 'NONE', #6002 ) ; +#5833 = ADVANCED_FACE ( 'NONE', ( #3716 ), #2837, .T. ) ; +#5834 = CARTESIAN_POINT ( 'NONE', ( 15.95819429557592000, -12.49999999999998900, 9.599985126439998200 ) ) ; +#5835 = ORIENTED_EDGE ( 'NONE', *, *, #12286, .T. ) ; +#5836 = CARTESIAN_POINT ( 'NONE', ( 27.19833740913650600, -12.50000000000248900, -22.03023222486606900 ) ) ; +#5837 = CARTESIAN_POINT ( 'NONE', ( 36.96558958882131000, -10.00000000000000200, -24.19805292924039700 ) ) ; +#5838 = CARTESIAN_POINT ( 'NONE', ( 30.87586154849786300, -23.78732160932978300, 16.79033259424527800 ) ) ; +#5839 = EDGE_CURVE ( 'NONE', #8669, #1758, #7182, .T. ) ; +#5840 = CARTESIAN_POINT ( 'NONE', ( 33.32890120624133300, -30.92908499219324300, 25.74307173405928100 ) ) ; +#5841 = ORIENTED_EDGE ( 'NONE', *, *, #10094, .F. ) ; +#5842 = CARTESIAN_POINT ( 'NONE', ( 11.06039828830394000, -30.80664506851588100, 27.88046558153261100 ) ) ; +#5843 = CARTESIAN_POINT ( 'NONE', ( 12.80161283838065200, -20.01165471613362700, 22.47702607830090900 ) ) ; +#5844 = CARTESIAN_POINT ( 'NONE', ( 15.13635667406057600, -12.49999999999999300, -12.81211335400254600 ) ) ; +#5845 = CARTESIAN_POINT ( 'NONE', ( 37.68784456987192000, -10.00000000000000200, -23.48876245695854300 ) ) ; +#5846 = CARTESIAN_POINT ( 'NONE', ( 24.88982045022012500, -12.49999999999994100, -12.72925194473759800 ) ) ; +#5847 = CARTESIAN_POINT ( 'NONE', ( 4.900811501434508200, -12.50000000000003200, 10.11836806623441600 ) ) ; +#5848 = CIRCLE ( 'NONE', #11342, 5.000000000000000900 ) ; +#5849 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 19.48143887112370700 ) ) ; +#5850 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999600, -95.07596123493894400, 16.93034213569669400 ) ) ; +#5851 = CARTESIAN_POINT ( 'NONE', ( 8.292370862040384000, -95.07596123493894400, 14.86765191855190500 ) ) ; +#5852 = CARTESIAN_POINT ( 'NONE', ( 36.80324855002776700, -18.92697857886421900, 13.37892244176511600 ) ) ; +#5853 = CARTESIAN_POINT ( 'NONE', ( 27.09725799106939800, -10.00000000000000400, -28.72114427675103000 ) ) ; +#5854 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -1.200000000000005700 ) ) ; +#5855 = CARTESIAN_POINT ( 'NONE', ( 9.228266987837441700, -30.71649504175578500, 27.23688643458321200 ) ) ; +#5856 = CARTESIAN_POINT ( 'NONE', ( 35.32294189901138300, -30.99661662990600400, 23.54268391951704200 ) ) ; +#5857 = ORIENTED_EDGE ( 'NONE', *, *, #9571, .F. ) ; +#5858 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -31.29513776008465000, 28.74509265499353500 ) ) ; +#5859 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#5860 = CARTESIAN_POINT ( 'NONE', ( 5.865462131175473100, -30.84012150211899700, 25.19031047387927900 ) ) ; +#5861 = CARTESIAN_POINT ( 'NONE', ( 2.201937003891415200, -9.999999999996436600, -20.05343113588598000 ) ) ; +#5862 = CARTESIAN_POINT ( 'NONE', ( 17.45431510909717300, -28.77949532668909400, 29.18866828981625600 ) ) ; +#5863 = CARTESIAN_POINT ( 'NONE', ( 3.677158256767771400, -30.66818252138487500, 22.32057608640446800 ) ) ; +#5864 = CARTESIAN_POINT ( 'NONE', ( 31.24275062728649000, -30.24984793476375300, 27.04292659115802200 ) ) ; +#5865 = DIRECTION ( 'NONE', ( 0.2102631003874712600, 0.0000000000000000000, -0.9776448376662397700 ) ) ; +#5866 = CARTESIAN_POINT ( 'NONE', ( 7.266198242155620200, -30.43251618725705000, 26.32431702485331100 ) ) ; +#5867 = CARTESIAN_POINT ( 'NONE', ( 36.37845346297036300, -28.90437002248177100, 22.05800830683790500 ) ) ; +#5868 = CARTESIAN_POINT ( 'NONE', ( 6.266058495799803100, -22.03500000000001400, 13.24481097032478700 ) ) ; +#5869 = CARTESIAN_POINT ( 'NONE', ( 37.24158068469675000, -28.62631670547853700, 17.93734533639774800 ) ) ; +#5870 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5871 = CARTESIAN_POINT ( 'NONE', ( 9.638636406564538500, -30.98182729911613700, 27.33221565295908600 ) ) ; +#5872 = CARTESIAN_POINT ( 'NONE', ( 4.051747056796260800, -30.33483870287423700, 23.80954005555011600 ) ) ; +#5873 = CARTESIAN_POINT ( 'NONE', ( 35.35615976278307900, -10.51366922873279300, -25.09057374403296600 ) ) ; +#5874 = CARTESIAN_POINT ( 'NONE', ( 3.358525124108474800, -7.500000000000006200, 24.72287626683326400 ) ) ; +#5875 = CARTESIAN_POINT ( 'NONE', ( 11.00012889393728900, -10.12604878047795500, -24.99999999999823800 ) ) ; +#5876 = FACE_OUTER_BOUND ( 'NONE', #4622, .T. ) ; +#5877 = CARTESIAN_POINT ( 'NONE', ( 30.56491672462351900, -16.56984214946687900, -26.15844042994666200 ) ) ; +#5878 = CARTESIAN_POINT ( 'NONE', ( 22.31280616483239100, -30.65917406624146200, 28.85723021296910300 ) ) ; +#5879 = CARTESIAN_POINT ( 'NONE', ( 23.44730213063383300, -12.50000000000000200, -14.35756759400110700 ) ) ; +#5880 = EDGE_CURVE ( 'NONE', #11059, #14394, #8674, .T. ) ; +#5881 = CARTESIAN_POINT ( 'NONE', ( 33.31066191829311400, -9.999999999999555900, -23.92076981543414100 ) ) ; +#5882 = VECTOR ( 'NONE', #3935, 1000.000000000000000 ) ; +#5883 = ORIENTED_EDGE ( 'NONE', *, *, #8158, .F. ) ; +#5884 = CARTESIAN_POINT ( 'NONE', ( 32.30499463019339900, -12.50000000000009100, 17.35144920937905200 ) ) ; +#5885 = CARTESIAN_POINT ( 'NONE', ( 33.20125094596814100, -29.85077357988900100, 25.93832699271567700 ) ) ; +#5886 = CARTESIAN_POINT ( 'NONE', ( 11.16272156872343900, -30.83577576209807700, 27.90613145301843200 ) ) ; +#5887 = CARTESIAN_POINT ( 'NONE', ( 14.70938638296827200, -19.17838366142619200, 23.14948191479105700 ) ) ; +#5888 = CARTESIAN_POINT ( 'NONE', ( 5.529651321336106500, -22.00121255562030200, -15.55174409816118200 ) ) ; +#5889 = CARTESIAN_POINT ( 'NONE', ( 40.19894748010744200, -12.49207140751602600, -19.74219049453691000 ) ) ; +#5890 = CARTESIAN_POINT ( 'NONE', ( 34.23899559370798300, -21.90426521499780700, -16.24682225414810300 ) ) ; +#5891 = AXIS2_PLACEMENT_3D ( 'NONE', #10607, #3888, #11721 ) ; +#5892 = FACE_OUTER_BOUND ( 'NONE', #3319, .T. ) ; +#5893 = CARTESIAN_POINT ( 'NONE', ( 7.512633966500575700, -18.90610937178228600, -23.45137730625265200 ) ) ; +#5894 = CARTESIAN_POINT ( 'NONE', ( 23.69144541313393400, -94.71799171680021300, 18.78817770566328700 ) ) ; +#5895 = CARTESIAN_POINT ( 'NONE', ( 11.72583912569973600, -95.07596123493493700, 17.17054295756474100 ) ) ; +#5896 = CARTESIAN_POINT ( 'NONE', ( 34.95793778942415000, -20.52013187552196200, 16.39712793833672700 ) ) ; +#5897 = ORIENTED_EDGE ( 'NONE', *, *, #7447, .T. ) ; +#5898 = CARTESIAN_POINT ( 'NONE', ( 33.43898173668864600, -20.29853308935253500, -22.05873839000869600 ) ) ; +#5899 = CARTESIAN_POINT ( 'NONE', ( 2.185133262091300700, -11.92747418448647100, -19.08876031342095600 ) ) ; +#5900 = CARTESIAN_POINT ( 'NONE', ( 9.243766094107059000, -30.37580715729397700, 27.26095719323143700 ) ) ; +#5901 = CARTESIAN_POINT ( 'NONE', ( 35.65498806125366800, -29.81592463461551600, 24.17781832267002100 ) ) ; +#5902 = EDGE_CURVE ( 'NONE', #14394, #9893, #6005, .T. ) ; +#5903 = ADVANCED_FACE ( 'NONE', ( #5962 ), #12820, .F. ) ; +#5904 = CARTESIAN_POINT ( 'NONE', ( 6.573153437977751400, -20.35112163316840400, 18.41624715012082100 ) ) ; +#5905 = CARTESIAN_POINT ( 'NONE', ( 5.865440864401342000, -29.87412180329283700, 25.36064353183647000 ) ) ; +#5906 = CARTESIAN_POINT ( 'NONE', ( 28.76625810378872600, -24.00636755896776000, 18.34635727626844200 ) ) ; +#5907 = CARTESIAN_POINT ( 'NONE', ( 3.034410411180058700, -10.00000000000000000, -24.19805292923679800 ) ) ; +#5908 = CARTESIAN_POINT ( 'NONE', ( 17.44237873759179500, -27.96664356504567600, 27.45669629622856800 ) ) ; +#5909 = CARTESIAN_POINT ( 'NONE', ( 7.471655426889696200, -10.00000000000000400, -26.14585536141008900 ) ) ; +#5910 = ORIENTED_EDGE ( 'NONE', *, *, #7687, .T. ) ; +#5911 = CARTESIAN_POINT ( 'NONE', ( 2.994717123089195800, -29.58504115950314500, 22.51082348245135400 ) ) ; +#5912 = CARTESIAN_POINT ( 'NONE', ( 31.26839461923307800, -30.68270047994447900, 27.02375748925519300 ) ) ; +#5913 = CARTESIAN_POINT ( 'NONE', ( 7.540459162887688500, -31.14859682177248600, 26.16292288345306000 ) ) ; +#5914 = CARTESIAN_POINT ( 'NONE', ( 37.42744540189004700, -29.64217863463184700, 21.91682118399484800 ) ) ; +#5915 = ORIENTED_EDGE ( 'NONE', *, *, #14051, .T. ) ; +#5916 = CARTESIAN_POINT ( 'NONE', ( 37.20230214548431700, -24.96337052354235600, 10.25072243846441800 ) ) ; +#5917 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -24.23648177666926200, 19.98972415240891800 ) ) ; +#5918 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#5919 = EDGE_CURVE ( 'NONE', #7258, #8803, #6141, .T. ) ; +#5920 = CARTESIAN_POINT ( 'NONE', ( 4.422546785111745900, -29.26562938467552000, 23.75525677099262000 ) ) ; +#5921 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5922 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999370300, -94.98563391249761900, 13.37629935971081000 ) ) ; +#5923 = ORIENTED_EDGE ( 'NONE', *, *, #6557, .F. ) ; +#5924 = CARTESIAN_POINT ( 'NONE', ( 10.43970284407520000, -10.84435148008012500, -25.04158582061768000 ) ) ; +#5925 = CARTESIAN_POINT ( 'NONE', ( 32.57948515278064900, -18.86120672117000300, -23.37490256351075900 ) ) ; +#5926 = CARTESIAN_POINT ( 'NONE', ( 9.666087062608371000, -28.22076919746019600, 25.86445095737807200 ) ) ; +#5927 = CARTESIAN_POINT ( 'NONE', ( 26.63578351631582600, -20.86166589633531000, -23.69983032458059900 ) ) ; +#5928 = CARTESIAN_POINT ( 'NONE', ( 30.15697011347394300, -12.67052688913298300, -25.10188606636893000 ) ) ; +#5929 = ORIENTED_EDGE ( 'NONE', *, *, #10647, .T. ) ; +#5930 = AXIS2_PLACEMENT_3D ( 'NONE', #2529, #9230, #10346 ) ; +#5931 = CARTESIAN_POINT ( 'NONE', ( 24.39183422287914700, -12.50000000000003400, 9.251100437760852600 ) ) ; +#5932 = CARTESIAN_POINT ( 'NONE', ( 33.29530747918582300, -30.63039472655251700, 25.94366832838801800 ) ) ; +#5933 = CARTESIAN_POINT ( 'NONE', ( 11.16314593427366500, -30.82086104117902900, 27.90888495464214400 ) ) ; +#5934 = CARTESIAN_POINT ( 'NONE', ( 16.22228865028890600, -19.43768874052304700, 23.29100076588443000 ) ) ; +#5935 = CARTESIAN_POINT ( 'NONE', ( 5.672133039852024400, -12.49999999999976400, -14.64963158335237700 ) ) ; +#5936 = CARTESIAN_POINT ( 'NONE', ( 36.24309991432596000, -97.42196504633057000, 18.37393771276376600 ) ) ; +#5937 = CARTESIAN_POINT ( 'NONE', ( 33.14097976120874700, -12.50000000000103600, -17.05439817470184500 ) ) ; +#5938 = EDGE_LOOP ( 'NONE', ( #9677, #1945, #12294, #12793, #13033, #4700, #4293 ) ) ; +#5939 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5226, #8870, #2171 ), + ( #9990, #3276, #11123 ), + ( #4394, #12228, #5500 ), + ( #13339, #6633, #39 ), + ( #7779, #1127, #8915 ), + ( #2218, #10037, #3323 ), + ( #11172, #4446, #12273 ), + ( #5549, #13380, #6685 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.007664391712222998900, 0.009882102740948393200, 0.01209981376967378600, 0.01653523582712457300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8085845259241226700, 1.000000000000000000), + ( 1.000000000000000000, 0.8417769234793989200, 1.000000000000000000), + ( 1.000000000000000000, 0.8702560228619196100, 1.000000000000000000), + ( 1.000000000000000000, 0.9187244656066018100, 1.000000000000000000), + ( 1.000000000000000000, 0.9383017383444327600, 1.000000000000000000), + ( 1.000000000000000000, 0.9849026854942217700, 1.000000000000000000), + ( 1.000000000000000000, 0.9998476928298500900, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#5940 = CARTESIAN_POINT ( 'NONE', ( 15.04449355851022200, -21.66302020008401300, -26.89019023858498500 ) ) ; +#5941 = CARTESIAN_POINT ( 'NONE', ( 29.57440556481933000, -95.07596123493894400, 15.73495959794811400 ) ) ; +#5942 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -10.00000000000000000, -19.99999999999999600 ) ) ; +#5943 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998600, -94.71789415300563100, 18.78842146235869100 ) ) ; +#5944 = EDGE_CURVE ( 'NONE', #10684, #12341, #4569, .T. ) ; +#5945 = CARTESIAN_POINT ( 'NONE', ( 34.10580093729006300, -19.95252637525541700, 17.66338645686860400 ) ) ; +#5946 = ORIENTED_EDGE ( 'NONE', *, *, #13667, .F. ) ; +#5947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.734723475976806800E-016, 1.000000000000000000 ) ) ; +#5948 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#5949 = CARTESIAN_POINT ( 'NONE', ( 9.329983288379592600, -30.80720974211673600, 27.25902970823689100 ) ) ; +#5950 = CARTESIAN_POINT ( 'NONE', ( 35.41100664147987200, -30.85100738402586300, 23.78732515930039800 ) ) ; +#5951 = CARTESIAN_POINT ( 'NONE', ( 17.60328465607026900, -30.66083845029162400, 28.85693673715480000 ) ) ; +#5952 = ORIENTED_EDGE ( 'NONE', *, *, #5766, .F. ) ; +#5953 = CARTESIAN_POINT ( 'NONE', ( 2.503580913279593200, -21.20210362292288400, 8.143731436596230100 ) ) ; +#5954 = CARTESIAN_POINT ( 'NONE', ( 35.14216832670512500, -95.07596123493897300, 10.80590508713789800 ) ) ; +#5955 = CARTESIAN_POINT ( 'NONE', ( 6.227237873035647000, -31.11378195564584800, 25.20786027165943500 ) ) ; +#5956 = CARTESIAN_POINT ( 'NONE', ( 34.57865204549609200, -22.94886904840075600, 10.78940069264331700 ) ) ; +#5957 = CARTESIAN_POINT ( 'NONE', ( 7.106849669549549600, -12.43027692430055200, -24.03914775183867600 ) ) ; +#5958 = CARTESIAN_POINT ( 'NONE', ( 5.881282802672156900, -97.45098915447145800, 19.51278648977825000 ) ) ; +#5959 = CARTESIAN_POINT ( 'NONE', ( 16.61324289376144500, -20.43438690969622900, -26.84921305636843100 ) ) ; +#5960 = ORIENTED_EDGE ( 'NONE', *, *, #2646, .F. ) ; +#5961 = CARTESIAN_POINT ( 'NONE', ( 3.953406362085229600, -30.79511564485928000, 22.48887905181458900 ) ) ; +#5962 = FACE_OUTER_BOUND ( 'NONE', #11239, .T. ) ; +#5963 = EDGE_CURVE ( 'NONE', #5737, #12896, #5848, .T. ) ; +#5964 = CARTESIAN_POINT ( 'NONE', ( 31.24268203959197600, -31.06295105900467800, 26.89940597622524600 ) ) ; +#5965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5966 = CARTESIAN_POINT ( 'NONE', ( 7.456767335554377300, -30.60880397547692100, 26.40280548806019200 ) ) ; +#5967 = CARTESIAN_POINT ( 'NONE', ( 36.40968805057916300, -30.60943786102149000, 21.75667314273356500 ) ) ; +#5968 = ORIENTED_EDGE ( 'NONE', *, *, #13575, .F. ) ; +#5969 = CARTESIAN_POINT ( 'NONE', ( 22.41525251969284900, -33.18150031828639600, 28.41247604058439800 ) ) ; +#5970 = CARTESIAN_POINT ( 'NONE', ( 4.433267001938464300, -30.74474850504602900, 23.78156342178876800 ) ) ; +#5971 = FACE_OUTER_BOUND ( 'NONE', #9662, .T. ) ; +#5972 = CARTESIAN_POINT ( 'NONE', ( 29.90375570882450900, -8.800098981295851900, 25.00000000000000400 ) ) ; +#5973 = VERTEX_POINT ( 'NONE', #6607 ) ; +#5974 = CARTESIAN_POINT ( 'NONE', ( 9.340509335647700700, -11.86805822340536800, -24.99999999999999600 ) ) ; +#5975 = VECTOR ( 'NONE', #5474, 1000.000000000000000 ) ; +#5976 = CARTESIAN_POINT ( 'NONE', ( 24.98431007728560600, -12.50000000000003600, -12.30526042961120400 ) ) ; +#5977 = CARTESIAN_POINT ( 'NONE', ( 27.23601372768313000, -18.92930313731042700, -26.57447706203199200 ) ) ; +#5978 = CARTESIAN_POINT ( 'NONE', ( 5.528070021586175100, -29.20330713101292000, 25.63906394086775700 ) ) ; +#5979 = AXIS2_PLACEMENT_3D ( 'NONE', #7003, #393, #8155 ) ; +#5980 = CARTESIAN_POINT ( 'NONE', ( 25.63367729990637400, -12.49999999999996300, -22.54184462891296900 ) ) ; +#5981 = CARTESIAN_POINT ( 'NONE', ( 29.58746794455161600, -19.14441112340812300, 21.64326682201425500 ) ) ; +#5982 = CARTESIAN_POINT ( 'NONE', ( 33.18991784748786200, -23.40015331564248100, 14.01682440486071200 ) ) ; +#5983 = CARTESIAN_POINT ( 'NONE', ( 32.99064872678961500, -29.77077130035824800, 26.02766870070351900 ) ) ; +#5984 = CARTESIAN_POINT ( 'NONE', ( 2.633444372959102200, -29.01046481468742400, 15.85157161390044000 ) ) ; +#5985 = CARTESIAN_POINT ( 'NONE', ( 11.16272053382659400, -30.80702009527267300, 27.91120155142297000 ) ) ; +#5986 = CARTESIAN_POINT ( 'NONE', ( 17.73806139137830900, -19.69127870009635100, 23.28924773641037400 ) ) ; +#5987 = CARTESIAN_POINT ( 'NONE', ( 15.01946089532593500, -12.49999999999999300, -12.30532309244793500 ) ) ; +#5988 = CARTESIAN_POINT ( 'NONE', ( 34.20777084088571500, -21.89049998080829000, -16.34488267846602800 ) ) ; +#5989 = CARTESIAN_POINT ( 'NONE', ( 24.63278140091136900, -12.49999999999998800, -13.31763859596364200 ) ) ; +#5990 = LINE ( 'NONE', #4044, #5617 ) ; +#5991 = VERTEX_POINT ( 'NONE', #12247 ) ; +#5992 = EDGE_CURVE ( 'NONE', #4028, #10725, #13697, .T. ) ; +#5993 = CARTESIAN_POINT ( 'NONE', ( 22.56873050441738500, -19.87468260212511200, 23.25870704130518300 ) ) ; +#5994 = CARTESIAN_POINT ( 'NONE', ( 32.08317675093550000, -95.07596123493894400, 15.75624645113489000 ) ) ; +#5995 = CARTESIAN_POINT ( 'NONE', ( 29.91079695902936900, -30.57982270904524600, 27.58474625543386700 ) ) ; +#5996 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#5997 = CARTESIAN_POINT ( 'NONE', ( 33.15167193121632700, -19.48035919191687900, 18.86096444861505700 ) ) ; +#5998 = VERTEX_POINT ( 'NONE', #3390 ) ; +#5999 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -17.49999999999999600 ) ) ; +#6000 = CARTESIAN_POINT ( 'NONE', ( 9.336913127755387600, -30.47262022923636900, 27.30163647102130000 ) ) ; +#6001 = CARTESIAN_POINT ( 'NONE', ( 35.31980035174248700, -29.40703756773268300, 24.14914457679087100 ) ) ; +#6002 = AXIS2_PLACEMENT_3D ( 'NONE', #13590, #13640, #6954 ) ; +#6003 = CARTESIAN_POINT ( 'NONE', ( 17.56133793030465300, -30.66176281334875100, 28.85677374700785700 ) ) ; +#6004 = CARTESIAN_POINT ( 'NONE', ( 15.08857785413959200, -16.73815472049151500, 23.81188152258929200 ) ) ; +#6005 = LINE ( 'NONE', #10606, #6179 ) ; +#6006 = ORIENTED_EDGE ( 'NONE', *, *, #6271, .F. ) ; +#6007 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999990200, -21.22609194186920000, 7.832681976494131800 ) ) ; +#6008 = CARTESIAN_POINT ( 'NONE', ( 37.47767627115357700, -90.62648002293806800, -3.049649405732303400 ) ) ; +#6009 = CARTESIAN_POINT ( 'NONE', ( 6.064625197771641200, -30.26637814401765400, 25.57776929719642900 ) ) ; +#6010 = CARTESIAN_POINT ( 'NONE', ( 16.10268763317206700, -12.50000000000001800, 9.701389147699863700 ) ) ; +#6011 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1225, #7876, #2313, #10140, #3425, #11268, #4538, #12368, #5653, #13473, #6782, #184, #7922, #1263, #9059, #2362 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0008709286355455719900, 0.001306392953318360400, 0.001741857271091149000, 0.002177321588863937500, 0.002612785906636726000, 0.003048250224409514600, 0.003483714542182302700 ), + .UNSPECIFIED. ) ; +#6012 = CARTESIAN_POINT ( 'NONE', ( 2.606635454160269200, -20.05966644997134900, -13.63582778139757000 ) ) ; +#6013 = ORIENTED_EDGE ( 'NONE', *, *, #11481, .F. ) ; +#6014 = EDGE_CURVE ( 'NONE', #12341, #13724, #5831, .T. ) ; +#6015 = CARTESIAN_POINT ( 'NONE', ( 3.079174201816272700, -29.96001497391550200, 22.68045122067166000 ) ) ; +#6016 = CARTESIAN_POINT ( 'NONE', ( 31.06920831158219400, -30.60491554370567600, 27.12480341964721800 ) ) ; +#6017 = CARTESIAN_POINT ( 'NONE', ( 3.009876916241522000, -18.68696122363333600, -16.75085427142630600 ) ) ; +#6018 = CARTESIAN_POINT ( 'NONE', ( 7.536465319400626600, -29.93514768391453600, 26.38379792712775900 ) ) ; +#6019 = CARTESIAN_POINT ( 'NONE', ( 37.05647284991737700, -29.30366543238087500, 22.13367253028788900 ) ) ; +#6020 = FACE_OUTER_BOUND ( 'NONE', #6904, .T. ) ; +#6021 = CARTESIAN_POINT ( 'NONE', ( 0.4734153224019237400, -11.89366128960763500, 8.005331014629295100 ) ) ; +#6022 = AXIS2_PLACEMENT_3D ( 'NONE', #10398, #3688, #11534 ) ; +#6023 = CARTESIAN_POINT ( 'NONE', ( 4.300229273432299800, -29.71562482168294700, 24.06883392905259800 ) ) ; +#6024 = ORIENTED_EDGE ( 'NONE', *, *, #4540, .T. ) ; +#6025 = CARTESIAN_POINT ( 'NONE', ( 17.50816442509452700, -33.35180202424786700, 26.50734624027246200 ) ) ; +#6026 = CARTESIAN_POINT ( 'NONE', ( 23.79847552485055900, -19.79966113963026700, -26.72794466071701100 ) ) ; +#6027 = CARTESIAN_POINT ( 'NONE', ( 2.792113102044321100, -31.50142312849590800, 23.17991222480308600 ) ) ; +#6028 = CARTESIAN_POINT ( 'NONE', ( 23.07953857741373900, -12.49999999999999800, -14.47996410993152200 ) ) ; +#6029 = CARTESIAN_POINT ( 'NONE', ( 37.03826050084390400, -18.92239348137929200, 12.69144445913084100 ) ) ; +#6030 = CARTESIAN_POINT ( 'NONE', ( 34.59555984968708500, -12.50000000000016200, 12.97817187407427200 ) ) ; +#6031 = EDGE_CURVE ( 'NONE', #154, #283, #6724, .T. ) ; +#6032 = CARTESIAN_POINT ( 'NONE', ( 33.11688518221613000, -30.47213242279496700, 26.10048589723733400 ) ) ; +#6033 = CARTESIAN_POINT ( 'NONE', ( 2.824008823960778800, -30.34620024003323000, 9.363122272368553200 ) ) ; +#6034 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001100, 27.93780948130460100 ) ) ; +#6035 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 19.48143887112370700 ) ) ; +#6036 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 1.981438871123700300 ) ) ; +#6037 = CARTESIAN_POINT ( 'NONE', ( 24.14732258138575100, -20.77496872315702700, -24.31690625209815000 ) ) ; +#6038 = ORIENTED_EDGE ( 'NONE', *, *, #13396, .T. ) ; +#6039 = CARTESIAN_POINT ( 'NONE', ( 4.902705771714543900, -28.61655780532834500, 22.99911610301133900 ) ) ; +#6040 = CARTESIAN_POINT ( 'NONE', ( 31.82400315487170800, -30.09267109394410500, 26.75596519378494900 ) ) ; +#6041 = CARTESIAN_POINT ( 'NONE', ( 8.330606680480363100, -99.99999999999998600, -34.30055536053079400 ) ) ; +#6042 = CARTESIAN_POINT ( 'NONE', ( 30.87474838697737700, -19.11772758759545400, 20.86696685139297000 ) ) ; +#6043 = CARTESIAN_POINT ( 'NONE', ( 23.66292631866175000, -19.18949841699696900, 23.36467695346058100 ) ) ; +#6044 = CARTESIAN_POINT ( 'NONE', ( 9.635374423032393700, -30.92393982053285500, 27.35094280137900200 ) ) ; +#6045 = CARTESIAN_POINT ( 'NONE', ( 35.55707789354004700, -30.50513802095831300, 24.16399158436722100 ) ) ; +#6046 = CARTESIAN_POINT ( 'NONE', ( 17.54089160292351900, -30.66221338081048100, 28.85669429980772400 ) ) ; +#6047 = CARTESIAN_POINT ( 'NONE', ( 34.39148702925599800, -93.12986408887175600, 20.14761888084558400 ) ) ; +#6048 = ADVANCED_FACE ( 'NONE', ( #5633, #5776, #5795, #5624 ), #5618, .T. ) ; +#6049 = CARTESIAN_POINT ( 'NONE', ( 34.08782111654289100, -10.07894708952910900, 23.01078796092365400 ) ) ; +#6050 = CARTESIAN_POINT ( 'NONE', ( 6.332495087916067100, -31.16598028360522200, 25.23761372309195400 ) ) ; +#6051 = EDGE_LOOP ( 'NONE', ( #6659, #3213, #14388, #3999 ) ) ; +#6052 = CARTESIAN_POINT ( 'NONE', ( 39.52664721424407900, -11.89378497133312300, 7.921200138573492900 ) ) ; +#6053 = CARTESIAN_POINT ( 'NONE', ( 10.83681155460925900, -23.96782807679017300, 18.07796759731625300 ) ) ; +#6054 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6055 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -97.51638471114853200, 22.06850012136330700 ) ) ; +#6056 = CARTESIAN_POINT ( 'NONE', ( 1.514612281159770200E-005, -9.999999999999994700, 8.033991248762161400 ) ) ; +#6057 = CARTESIAN_POINT ( 'NONE', ( 31.05495644483776000, -30.98853693780184000, 27.02464377615408600 ) ) ; +#6058 = CARTESIAN_POINT ( 'NONE', ( 7.857050972666169000, -30.81370660443838700, 26.55037492040080200 ) ) ; +#6059 = CARTESIAN_POINT ( 'NONE', ( 36.75410072755487800, -30.46122343745341600, 21.93440590895130500 ) ) ; +#6060 = VECTOR ( 'NONE', #7046, 1000.000000000000000 ) ; +#6061 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6062 = ORIENTED_EDGE ( 'NONE', *, *, #4213, .F. ) ; +#6063 = CARTESIAN_POINT ( 'NONE', ( 4.727248957965984200, -30.99346860209876200, 23.64425074966725400 ) ) ; +#6064 = CARTESIAN_POINT ( 'NONE', ( 40.00000002490161700, -10.00000000622538300, -11.53324907984485600 ) ) ; +#6065 = CARTESIAN_POINT ( 'NONE', ( 39.85611786576818400, -10.45338037352215500, -12.74674686536504700 ) ) ; +#6066 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#6067 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -100.0000000000000100, -6.100827442047410900 ) ) ; +#6068 = CARTESIAN_POINT ( 'NONE', ( 36.24309991432517100, -97.40649683660852500, 18.37666517548147000 ) ) ; +#6069 = CARTESIAN_POINT ( 'NONE', ( 24.50949632780762900, -20.78623202890435100, -24.23682443543666300 ) ) ; +#6070 = EDGE_CURVE ( 'NONE', #8513, #4379, #5478, .T. ) ; +#6071 = CARTESIAN_POINT ( 'NONE', ( 37.40493322772856300, -28.26585382249665600, 14.92142141615367000 ) ) ; +#6072 = FACE_OUTER_BOUND ( 'NONE', #7859, .T. ) ; +#6073 = CARTESIAN_POINT ( 'NONE', ( 24.80428319017726600, -12.49999999999996400, 8.563935718410187200 ) ) ; +#6074 = CARTESIAN_POINT ( 'NONE', ( 32.99098767083802400, -31.16431633084474100, 25.78248419180345200 ) ) ; +#6075 = VERTEX_POINT ( 'NONE', #4506 ) ; +#6076 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000300, 27.93780948130460100 ) ) ; +#6077 = CARTESIAN_POINT ( 'NONE', ( 33.54166065751529400, -22.07315362509821800, -22.21896150751958000 ) ) ; +#6078 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -95.45538001128306900, 3.667107191274056300 ) ) ; +#6079 = CARTESIAN_POINT ( 'NONE', ( 28.68813440735806400, -11.14063917059208100, 24.45614895767085900 ) ) ; +#6080 = CARTESIAN_POINT ( 'NONE', ( 34.13502965856232400, -29.45883158911291100, 25.12644356162854100 ) ) ; +#6081 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9782, #4186, #6755, #375, #8134, #1465, #9260, #2561, #10378, #3668, #11516, #4782, #12612, #5906, #13719, #7037, #419, #8185, #1519, #9309, #2605, #10431, #3720, #11561, #4824, #12665, #5956, #13763, #7084, #467, #8235, #1561, #9357, #2651, #10481, #3768 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 4 ), + ( -5.999999999981432200E-008, 0.0003056126720467910700, 0.0006112853440935819000, 0.001222630688187164100, 0.002445321376374330000, 0.003668012064561495500, 0.004890702752748660500, 0.007336084129122981900, 0.008558774817310144800, 0.009781465505497308500, 0.01222684688187163600, 0.01344953757005880500, 0.01467222825824597400, 0.01589491894643314500, 0.01711760963462031400, 0.01834030032280748600, 0.01895164566690107600, 0.01925731833894786500, 0.01956299101099465500 ), + .UNSPECIFIED. ) ; +#6082 = CARTESIAN_POINT ( 'NONE', ( 29.03502618512002400, -20.07515952392974900, 21.71130339302116100 ) ) ; +#6083 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#6084 = CARTESIAN_POINT ( 'NONE', ( 33.42137016759014000, -20.35061919475994700, 18.42227437470267800 ) ) ; +#6085 = CARTESIAN_POINT ( 'NONE', ( 9.631167962013641700, -30.65036141330071500, 27.41027752038433400 ) ) ; +#6086 = CARTESIAN_POINT ( 'NONE', ( 35.15164440834404800, -29.20496745166085300, 24.07292537302218000 ) ) ; +#6087 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #10700, #6327 ), + ( #7466, #828 ), + ( #8611, #1922 ), + ( #9738, #3027 ), + ( #10874, #4137 ), + ( #11975, #5246 ), + ( #13088, #6382 ), + ( #14187, #7516 ), + ( #875, #8661 ), + ( #1970, #9785 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1249999999999999200, 0.1874999999999998300, 0.2499999999999997200, 0.3322941183881585900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#6088 = EDGE_LOOP ( 'NONE', ( #10203, #6175, #13329, #2452 ) ) ; +#6089 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -95.26318031278476900, 10.28785978983546000 ) ) ; +#6090 = EDGE_CURVE ( 'NONE', #7937, #8489, #9828, .T. ) ; +#6091 = CARTESIAN_POINT ( 'NONE', ( 28.43680119345860600, -97.49994968324419600, 21.42430477526711400 ) ) ; +#6092 = CARTESIAN_POINT ( 'NONE', ( 26.80726306557067300, -11.35787250351677200, 24.76057044126785600 ) ) ; +#6093 = CARTESIAN_POINT ( 'NONE', ( 7.454737007472898500, -20.77772991524915400, 19.18925968697283200 ) ) ; +#6094 = CARTESIAN_POINT ( 'NONE', ( 28.66731140026653100, -9.376957338359165600, 25.00000000000000000 ) ) ; +#6095 = CARTESIAN_POINT ( 'NONE', ( 6.150969390882007600, -30.48744785090374200, 25.60879425537051500 ) ) ; +#6096 = ORIENTED_EDGE ( 'NONE', *, *, #12328, .T. ) ; +#6097 = CARTESIAN_POINT ( 'NONE', ( 39.99998485366997900, -9.999999999999909400, 8.033991419001171900 ) ) ; +#6098 = CARTESIAN_POINT ( 'NONE', ( 11.43611868366297700, -12.49999999999512700, 20.50602341398830200 ) ) ; +#6099 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 1.981438871123700300 ) ) ; +#6100 = CARTESIAN_POINT ( 'NONE', ( 0.4790719141533319500, -11.89302601121258500, 8.452114150470462700 ) ) ; +#6101 = VERTEX_POINT ( 'NONE', #12382 ) ; +#6102 = CARTESIAN_POINT ( 'NONE', ( 30.96260556461186700, -30.45581197471874200, 27.17795914434931200 ) ) ; +#6103 = CARTESIAN_POINT ( 'NONE', ( 13.67140234131096000, -27.29202104598545700, 21.46271269173173500 ) ) ; +#6104 = CARTESIAN_POINT ( 'NONE', ( 7.872696702772474400, -30.22538426950642100, 26.62454937022351200 ) ) ; +#6105 = CARTESIAN_POINT ( 'NONE', ( 36.46853474134789500, -29.01482919852152500, 22.30536508651130500 ) ) ; +#6106 = ORIENTED_EDGE ( 'NONE', *, *, #3773, .T. ) ; +#6107 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999992000, -95.07596123493893000, 11.50239124669686000 ) ) ; +#6108 = EDGE_CURVE ( 'NONE', #9349, #11929, #2450, .T. ) ; +#6109 = CARTESIAN_POINT ( 'NONE', ( 4.278470918937814300, -30.07248934396563900, 24.18923441661711800 ) ) ; +#6110 = CARTESIAN_POINT ( 'NONE', ( 15.76268801705194100, -32.08003161131109200, 21.03753419046745800 ) ) ; +#6111 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6112 = CARTESIAN_POINT ( 'NONE', ( 34.35586862908939300, -22.03500000000001400, 11.70178179094578000 ) ) ; +#6113 = CARTESIAN_POINT ( 'NONE', ( 29.55506394631251900, -30.83117956137227400, 27.67783419726804100 ) ) ; +#6114 = CARTESIAN_POINT ( 'NONE', ( 34.72463899874274800, -97.40649683660852500, 19.21404679744339500 ) ) ; +#6115 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -18.70000000000000600 ) ) ; +#6116 = ADVANCED_FACE ( 'NONE', ( #5607 ), #5147, .F. ) ; +#6117 = CARTESIAN_POINT ( 'NONE', ( 22.47955416301046600, -30.66267911654902500, 28.85661217803113800 ) ) ; +#6118 = ORIENTED_EDGE ( 'NONE', *, *, #12066, .F. ) ; +#6119 = CARTESIAN_POINT ( 'NONE', ( 22.85953489754776100, -12.49999999999825200, -22.94081750444224400 ) ) ; +#6120 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#6121 = CARTESIAN_POINT ( 'NONE', ( 34.23554351827002100, -23.09682103020357900, 11.84746369469432300 ) ) ; +#6122 = CARTESIAN_POINT ( 'NONE', ( 33.00728355178102900, -30.28516408243089900, 26.16624785132264500 ) ) ; +#6123 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999993300, -20.41446071242021500, -11.53187062879840900 ) ) ; +#6124 = EDGE_LOOP ( 'NONE', ( #6863, #4346, #12024, #3515 ) ) ; +#6125 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6126 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 8.981438871123703600, 20.00000000000000400 ) ) ; +#6127 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999990100, -20.76351822333076700, -24.39789867012037700 ) ) ; +#6128 = LINE ( 'NONE', #7363, #11464 ) ; +#6129 = CARTESIAN_POINT ( 'NONE', ( 47.49999999999992900, -21.23116646380286800, -11.74895849411041100 ) ) ; +#6130 = CARTESIAN_POINT ( 'NONE', ( 35.35814371520767500, -29.15166245939226300, 23.82145976507771900 ) ) ; +#6131 = ORIENTED_EDGE ( 'NONE', *, *, #703, .F. ) ; +#6132 = CARTESIAN_POINT ( 'NONE', ( 27.68123358458272400, -19.73490599983157900, 22.35490456546253000 ) ) ; +#6133 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -94.74682992296695300, 18.71443453778785600 ) ) ; +#6134 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23026870191561200, -11.47004060918966900 ) ) ; +#6135 = CARTESIAN_POINT ( 'NONE', ( 9.838180784870798900, -30.96150834694659100, 27.41942024608365700 ) ) ; +#6136 = CARTESIAN_POINT ( 'NONE', ( 35.60674659580464400, -30.23055947346950500, 24.29452836102187200 ) ) ; +#6137 = FACE_OUTER_BOUND ( 'NONE', #12248, .T. ) ; +#6138 = EDGE_LOOP ( 'NONE', ( #6680, #6709 ) ) ; +#6139 = CARTESIAN_POINT ( 'NONE', ( 35.93572163521955100, -94.44804360490653000, 7.170630477972345300 ) ) ; +#6140 = CARTESIAN_POINT ( 'NONE', ( 22.49999999995962300, -94.74682992296715200, 18.71443453778742600 ) ) ; +#6141 = LINE ( 'NONE', #10815, #5975 ) ; +#6142 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.723952627011016100, 15.80112425796745000 ) ) ; +#6143 = CARTESIAN_POINT ( 'NONE', ( 5.172331318121702100, -95.07596123493894400, 13.78185651884840000 ) ) ; +#6144 = CARTESIAN_POINT ( 'NONE', ( 6.324071861486745900, -29.60659406968030900, 25.52434851356226600 ) ) ; +#6145 = CARTESIAN_POINT ( 'NONE', ( 41.94531904090722200, -10.00000000000000500, 8.516663162692985600 ) ) ; +#6146 = CARTESIAN_POINT ( 'NONE', ( 16.55269786936620900, -12.50000000000001200, 9.949393076289691600 ) ) ; +#6147 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -97.51638471114853200, 22.06850012136331100 ) ) ; +#6148 = CARTESIAN_POINT ( 'NONE', ( -1.641974381642333300, -9.999999999999994700, 11.53207382005858200 ) ) ; +#6149 = CIRCLE ( 'NONE', #7435, 1.200000000000006600 ) ; +#6150 = EDGE_CURVE ( 'NONE', #9123, #4138, #1962, .T. ) ; +#6151 = ORIENTED_EDGE ( 'NONE', *, *, #2956, .F. ) ; +#6152 = CARTESIAN_POINT ( 'NONE', ( 30.96761025047602400, -30.83061652194062700, 27.12335567530370600 ) ) ; +#6153 = VECTOR ( 'NONE', #6409, 1000.000000000000000 ) ; +#6154 = CARTESIAN_POINT ( 'NONE', ( 9.902388344490820100, -20.34200637605952300, 21.10829408312930500 ) ) ; +#6155 = CARTESIAN_POINT ( 'NONE', ( 8.077828504882905500, -31.03696173901427000, 26.55963158489673900 ) ) ; +#6156 = CARTESIAN_POINT ( 'NONE', ( 37.20892791073185200, -30.08405331999390200, 22.10379077417012200 ) ) ; +#6157 = EDGE_CURVE ( 'NONE', #12341, #10174, #5271, .T. ) ; +#6158 = CARTESIAN_POINT ( 'NONE', ( 0.05733869331107596000, -7.500000000000148300, 20.87443369176173700 ) ) ; +#6159 = ORIENTED_EDGE ( 'NONE', *, *, #13481, .T. ) ; +#6160 = CARTESIAN_POINT ( 'NONE', ( 4.746752944500120600, -29.17717244001234500, 23.94794416400077700 ) ) ; +#6161 = CARTESIAN_POINT ( 'NONE', ( 10.57682334444950100, -32.84459165560506500, 27.24682378892650900 ) ) ; +#6162 = CARTESIAN_POINT ( 'NONE', ( 37.05072743853165200, -89.85744524174059200, -0.4790332503557276900 ) ) ; +#6163 = CARTESIAN_POINT ( 'NONE', ( 31.94337236086744600, -100.0000000000000100, 2.250973072611177200 ) ) ; +#6164 = CARTESIAN_POINT ( 'NONE', ( 29.24850167309061500, -30.72660477921268900, 27.79621602807910500 ) ) ; +#6165 = CARTESIAN_POINT ( 'NONE', ( 28.80369952359694000, -100.0000000000000700, 20.89608853318620500 ) ) ; +#6166 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561061092300, 7.000000000000000900, 20.69000000000000100 ) ) ; +#6167 = ORIENTED_EDGE ( 'NONE', *, *, #12701, .T. ) ; +#6168 = AXIS2_PLACEMENT_3D ( 'NONE', #9135, #2429, #10260 ) ; +#6169 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 51.02052347080197600, -11.74043533514387100 ) ) ; +#6170 = CARTESIAN_POINT ( 'NONE', ( 3.548813848143600200, -30.55012901976708100, 21.46098783608993800 ) ) ; +#6171 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 10.00000000000000000, 25.00000000000000400 ) ) ; +#6172 = CARTESIAN_POINT ( 'NONE', ( 34.94747996163248900, -12.50000000000050100, 11.45345698048469000 ) ) ; +#6173 = CARTESIAN_POINT ( 'NONE', ( 32.94697022453470900, -31.01621562401984300, 25.94195821643579000 ) ) ; +#6174 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#6175 = ORIENTED_EDGE ( 'NONE', *, *, #2736, .T. ) ; +#6176 = CARTESIAN_POINT ( 'NONE', ( 28.85224522996142900, -10.07168435267340800, -25.00000000000118000 ) ) ; +#6177 = CARTESIAN_POINT ( 'NONE', ( 16.01239729032255400, -12.49999999999926500, -22.85352284005002200 ) ) ; +#6178 = EDGE_CURVE ( 'NONE', #7556, #7400, #5310, .T. ) ; +#6179 = VECTOR ( 'NONE', #12927, 1000.000000000000000 ) ; +#6180 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -19.99999999999999600 ) ) ; +#6181 = CARTESIAN_POINT ( 'NONE', ( 36.13532479695723500, -28.97044949804776700, 22.63239722025757700 ) ) ; +#6182 = CARTESIAN_POINT ( 'NONE', ( 5.601698549261232800, -100.0000000000000000, 18.90271971053147500 ) ) ; +#6183 = ORIENTED_EDGE ( 'NONE', *, *, #5839, .F. ) ; +#6184 = CARTESIAN_POINT ( 'NONE', ( 26.26788377136088600, -19.44119231091043400, 22.86782303461772200 ) ) ; +#6185 = CARTESIAN_POINT ( 'NONE', ( 13.45090147312316600, -12.49999999999992400, 21.38747441201718400 ) ) ; +#6186 = CARTESIAN_POINT ( 'NONE', ( 0.05684568911174583300, -7.499999994603760100, 20.87260321499220300 ) ) ; +#6187 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999298300, -20.00134532907563700, -11.57666304916121400 ) ) ; +#6188 = CARTESIAN_POINT ( 'NONE', ( 9.832819796437158600, -30.73586677177818800, 27.47562533237394400 ) ) ; +#6189 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #8778, #13163, #12143 ), + ( #5408, #13251, #6542 ), + ( #14344, #7682, #1037 ), + ( #8823, #2123, #9943 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.009414027337014895300, 0.01006875421042855600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811871356600, 1.000000000000000000), + ( 1.000000000000000000, 0.7130121277563012900, 1.000000000000000000), + ( 1.000000000000000000, 0.7196123181338633900, 1.000000000000000000), + ( 1.000000000000000000, 0.7258093592940121400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#6190 = CARTESIAN_POINT ( 'NONE', ( 35.15061064135710500, -31.02949557969945400, 23.75030099328602900 ) ) ; +#6191 = CARTESIAN_POINT ( 'NONE', ( 8.576503705315204200, -23.71419500949404800, 16.26583230671582600 ) ) ; +#6192 = VERTEX_POINT ( 'NONE', #8030 ) ; +#6193 = AXIS2_PLACEMENT_3D ( 'NONE', #7305, #679, #8456 ) ; +#6194 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -94.39237608411662000, 1.716882203204967300 ) ) ; +#6195 = CARTESIAN_POINT ( 'NONE', ( 2.215345101517346600, -18.82242488921430000, 8.485467684893658100 ) ) ; +#6196 = ADVANCED_FACE ( 'NONE', ( #5439 ), #2297, .F. ) ; +#6197 = CARTESIAN_POINT ( 'NONE', ( 2.397741762989666000, -19.59044087190933700, 7.821090202219880700 ) ) ; +#6198 = CARTESIAN_POINT ( 'NONE', ( 30.35969057905770200, -28.22210766081739300, 25.85386652111954900 ) ) ; +#6199 = CARTESIAN_POINT ( 'NONE', ( 6.363541196075750900, -30.74999757371586300, 25.64373860512358400 ) ) ; +#6200 = CARTESIAN_POINT ( 'NONE', ( 37.40650140057083200, -18.72239673224636300, -15.26722506108136400 ) ) ; +#6201 = LINE ( 'NONE', #12777, #6509 ) ; +#6202 = CARTESIAN_POINT ( 'NONE', ( 39.25522156542897500, -11.88946756031598500, 11.10222167505030200 ) ) ; +#6203 = CARTESIAN_POINT ( 'NONE', ( 13.36421648367831400, -24.13833410366435200, 19.29165580686704500 ) ) ; +#6204 = EDGE_CURVE ( 'NONE', #13724, #8954, #8925, .T. ) ; +#6205 = CARTESIAN_POINT ( 'NONE', ( 1.147474562374106900, -9.999999999995445400, 14.40478298633496300 ) ) ; +#6206 = ORIENTED_EDGE ( 'NONE', *, *, #4620, .T. ) ; +#6207 = CARTESIAN_POINT ( 'NONE', ( 30.75693751295881700, -30.38395780312509200, 27.26113481761089100 ) ) ; +#6208 = CARTESIAN_POINT ( 'NONE', ( 4.734760691531835000, -28.85815751871888300, 23.83799537698396500 ) ) ; +#6209 = CARTESIAN_POINT ( 'NONE', ( 8.044343627312416700, -30.50054644231208600, 26.72042031040248800 ) ) ; +#6210 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6133, #5005, #7263, #641, #8417, #1734, #9543, #2827, #10669, #3953 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.006272434355767032500, 0.007840542944708792800, 0.009408651533650553100, 0.01254486871153407500 ), + .UNSPECIFIED. ) ; +#6211 = CARTESIAN_POINT ( 'NONE', ( 36.14776563097142800, -28.96979271514105700, 22.62301381491380400 ) ) ; +#6212 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.26512727427896700, 8.543711005772618000 ) ) ; +#6213 = CARTESIAN_POINT ( 'NONE', ( 4.393086438248326800, -30.35372680458471000, 24.23394884424894300 ) ) ; +#6214 = CARTESIAN_POINT ( 'NONE', ( 9.654560757022995400, -38.24630951876599000, 17.78032805003544000 ) ) ; +#6215 = CARTESIAN_POINT ( 'NONE', ( 37.63537752890901100, -95.07596123493894400, 8.991554784011647400 ) ) ; +#6216 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6217 = CARTESIAN_POINT ( 'NONE', ( 27.70916246864324600, -22.03500000000001400, 19.22717339817824100 ) ) ; +#6218 = CARTESIAN_POINT ( 'NONE', ( 29.24729713859592900, -30.80580699804339100, 27.78426320881153100 ) ) ; +#6219 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438938600, 7.000000000000000000, -20.68999999999999400 ) ) ; +#6220 = CARTESIAN_POINT ( 'NONE', ( 2.815241179226149800, -30.18028200536703300, 21.52620117954619200 ) ) ; +#6221 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -100.0000000000000300, -25.63802908547508600 ) ) ; +#6222 = CARTESIAN_POINT ( 'NONE', ( 24.91696569669219800, -12.49999999999997900, 8.224426057359668400 ) ) ; +#6223 = EDGE_CURVE ( 'NONE', #7302, #10684, #4934, .T. ) ; +#6224 = CARTESIAN_POINT ( 'NONE', ( 32.67483339502914700, -30.02795738954949900, 26.29800597325703700 ) ) ; +#6225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669239500, -0.9848077530122092400 ) ) ; +#6226 = CARTESIAN_POINT ( 'NONE', ( 29.78388639492649400, -10.41743565794823400, -24.99999999999999600 ) ) ; +#6227 = CARTESIAN_POINT ( 'NONE', ( 3.550532966968379200, -30.55079519729964900, 21.46087037243996700 ) ) ; +#6228 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, 51.02052347080197600, 20.52816548656995700 ) ) ; +#6229 = CARTESIAN_POINT ( 'NONE', ( 16.84457724659731800, -12.50000000000000500, -14.46125065381377300 ) ) ; +#6230 = CIRCLE ( 'NONE', #4347, 7.500000000000000000 ) ; +#6231 = DIRECTION ( 'NONE', ( 5.327447116441166800E-016, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#6232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#6233 = CARTESIAN_POINT ( 'NONE', ( 24.79041741326483400, -19.18132006630597200, 23.24400725475377200 ) ) ; +#6234 = CARTESIAN_POINT ( 'NONE', ( 16.96103417420666300, -12.50000000000002700, 10.08138930542394200 ) ) ; +#6235 = ORIENTED_EDGE ( 'NONE', *, *, #7518, .T. ) ; +#6236 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.57596123493894400, 11.50239124669685800 ) ) ; +#6237 = CARTESIAN_POINT ( 'NONE', ( 16.83240620982311600, -19.29355280088593400, 23.36129589456515300 ) ) ; +#6238 = CARTESIAN_POINT ( 'NONE', ( 9.838196405192583400, -30.52208209368776100, 27.49685704336278400 ) ) ; +#6239 = CARTESIAN_POINT ( 'NONE', ( 35.41728388984952100, -29.99755696158886700, 24.47577009748041000 ) ) ; +#6240 = CARTESIAN_POINT ( 'NONE', ( 7.835326693762099600, -12.50000000000041200, 17.52345648465381000 ) ) ; +#6241 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -90.07596123493894400, -4.350951650170411100 ) ) ; +#6242 = CARTESIAN_POINT ( 'NONE', ( 5.663498159344222800, -19.04491415671352400, 17.70536426153903900 ) ) ; +#6243 = EDGE_CURVE ( 'NONE', #5570, #6332, #4665, .T. ) ; +#6244 = CARTESIAN_POINT ( 'NONE', ( 2.499378315738206800, -20.40478059965145300, 7.907347626939250400 ) ) ; +#6245 = CARTESIAN_POINT ( 'NONE', ( 39.43497685938037700, -11.89111627161305800, 9.840398738443928700 ) ) ; +#6246 = CARTESIAN_POINT ( 'NONE', ( 6.407145963408292600, -29.91933136601750900, 25.72757796441050700 ) ) ; +#6247 = CARTESIAN_POINT ( 'NONE', ( 38.85251973007271400, -9.999999999999998200, 14.40479739158955600 ) ) ; +#6248 = CARTESIAN_POINT ( 'NONE', ( 16.33707368133800100, -19.18949841699706100, 23.36467695346054500 ) ) ; +#6249 = CARTESIAN_POINT ( 'NONE', ( 13.28173334682195900, -12.49999999999996800, 21.32832546908064900 ) ) ; +#6250 = CARTESIAN_POINT ( 'NONE', ( 34.31754902628904300, -12.29943728468807000, -23.14865527140158000 ) ) ; +#6251 = ORIENTED_EDGE ( 'NONE', *, *, #3189, .F. ) ; +#6252 = CARTESIAN_POINT ( 'NONE', ( 3.009441931287627300, -18.68699285411829400, -16.74951543723394600 ) ) ; +#6253 = CARTESIAN_POINT ( 'NONE', ( 4.372946063133646500, -11.88101999425903100, 19.04926414927587800 ) ) ; +#6254 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.500000000000000000, -22.49999999999999600 ) ) ; +#6255 = CARTESIAN_POINT ( 'NONE', ( 30.77159813440306700, -30.72943338640559900, 27.23444226142581200 ) ) ; +#6256 = CARTESIAN_POINT ( 'NONE', ( 6.924910467728791400, -26.59680773750671900, 17.75927519464276500 ) ) ; +#6257 = CARTESIAN_POINT ( 'NONE', ( 8.374265971115928400, -31.09425020595272600, 26.68601238253939200 ) ) ; +#6258 = CARTESIAN_POINT ( 'NONE', ( 37.09787455776033500, -29.80178011730586700, 22.47658395120939900 ) ) ; +#6259 = CARTESIAN_POINT ( 'NONE', ( 3.853999029063881500, -94.17920530917905400, 6.208122608113861900 ) ) ; +#6260 = CARTESIAN_POINT ( 'NONE', ( 4.782559277572985900, -29.26401565238580500, 24.08398016417120900 ) ) ; +#6261 = CARTESIAN_POINT ( 'NONE', ( 8.174547215781117900, -31.36362213525578500, 18.01299502310046900 ) ) ; +#6262 = CARTESIAN_POINT ( 'NONE', ( 28.76892787443054500, -95.07596123493891600, 8.644340388082667900 ) ) ; +#6263 = CARTESIAN_POINT ( 'NONE', ( 0.9033426677114403400, -10.66094185594435500, 14.42016676035745700 ) ) ; +#6264 = EDGE_LOOP ( 'NONE', ( #6024, #12938, #2483, #1791 ) ) ; +#6265 = CARTESIAN_POINT ( 'NONE', ( 29.24855580927590300, -30.87391082835464900, 27.77013102023844100 ) ) ; +#6266 = CARTESIAN_POINT ( 'NONE', ( 27.29298309031624100, -100.0000000000000000, 21.21300320112067800 ) ) ; +#6267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6268 = ADVANCED_FACE ( 'NONE', ( #4920 ), #2751, .F. ) ; +#6269 = CARTESIAN_POINT ( 'NONE', ( 39.56022765422520800, -11.75908938309909900, 8.362084874379110700 ) ) ; +#6270 = CARTESIAN_POINT ( 'NONE', ( 36.24005064090225400, -30.70605213303356300, 22.10502394000727500 ) ) ; +#6271 = EDGE_CURVE ( 'NONE', #12598, #11929, #1591, .T. ) ; +#6272 = CARTESIAN_POINT ( 'NONE', ( 3.118508689338575800, -29.05971190298257800, 21.72378770361893500 ) ) ; +#6273 = CARTESIAN_POINT ( 'NONE', ( 6.245297715500232300, -20.28809933266904900, -17.18388459629823800 ) ) ; +#6274 = ORIENTED_EDGE ( 'NONE', *, *, #12243, .F. ) ; +#6275 = CARTESIAN_POINT ( 'NONE', ( 34.84436477048045300, -22.77810141044964400, 9.556652290861084300 ) ) ; +#6276 = CARTESIAN_POINT ( 'NONE', ( 32.72435934247322800, -30.74442794022866500, 26.25423471719979300 ) ) ; +#6277 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #112, #8894, #2198, #7850, #1202, #8988, #2287, #10115, #3399, #11241, #4513, #12346 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001193007450488394700, 0.002386014900976789400, 0.003579022351465184500, 0.004175526076709390300, 0.004772029801953596100 ), + .UNSPECIFIED. ) ; +#6278 = CARTESIAN_POINT ( 'NONE', ( 2.200302400298135300, -18.78242143303499400, -12.74047862397797500 ) ) ; +#6279 = CARTESIAN_POINT ( 'NONE', ( 29.96307849461744200, -11.63703386743116400, -25.06010869433513500 ) ) ; +#6280 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6281 = CARTESIAN_POINT ( 'NONE', ( 17.64039441766889400, -33.35446909076586800, 26.50697697917620100 ) ) ; +#6282 = CARTESIAN_POINT ( 'NONE', ( 12.79126472785643100, -20.89212657814507400, -23.48315053556140300 ) ) ; +#6283 = ORIENTED_EDGE ( 'NONE', *, *, #14349, .T. ) ; +#6284 = CARTESIAN_POINT ( 'NONE', ( 12.45252773853832600, -10.00000000000000000, 25.00000000000000000 ) ) ; +#6285 = CARTESIAN_POINT ( 'NONE', ( 6.568097290007529800, -10.41366473904357700, -25.00000000000000000 ) ) ; +#6286 = CARTESIAN_POINT ( 'NONE', ( 22.76470447730607900, -19.94600564373892100, 23.25240530553032400 ) ) ; +#6287 = ORIENTED_EDGE ( 'NONE', *, *, #13420, .F. ) ; +#6288 = CARTESIAN_POINT ( 'NONE', ( 15.80438718466495000, -24.22054339541199000, 19.87681392420174500 ) ) ; +#6289 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -93.58403201463147500, 0.4683135292907861200 ) ) ; +#6290 = CARTESIAN_POINT ( 'NONE', ( -1.237515135938532800E-015, 9.723972447247824400, -19.19885073465395900 ) ) ; +#6291 = CARTESIAN_POINT ( 'NONE', ( 10.23993477699983500, -30.80099681579205000, 27.61254823853417800 ) ) ; +#6292 = CARTESIAN_POINT ( 'NONE', ( 35.11674943942482200, -30.93696642323418200, 24.03094084283847900 ) ) ; +#6293 = CARTESIAN_POINT ( 'NONE', ( 15.90609861332187000, -12.49999999999999100, 9.549780113871440400 ) ) ; +#6294 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438938600, 7.000000000000000900, 20.69000000000000100 ) ) ; +#6295 = EDGE_CURVE ( 'NONE', #8795, #3696, #4924, .T. ) ; +#6296 = CARTESIAN_POINT ( 'NONE', ( 15.85712798139027600, -19.18877795530371000, 23.32732002495325600 ) ) ; +#6297 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11051, #4325, #5423, #13267 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -9.730691804916832900E-006, 0.0008199335665023264000 ), + .UNSPECIFIED. ) ; +#6298 = ORIENTED_EDGE ( 'NONE', *, *, #4993, .F. ) ; +#6299 = CARTESIAN_POINT ( 'NONE', ( 2.500675973039550500, -21.21919539453178100, 7.935168900309557600 ) ) ; +#6300 = CARTESIAN_POINT ( 'NONE', ( 33.04822592549076200, -11.87905321570916900, 21.60381946479514800 ) ) ; +#6301 = CARTESIAN_POINT ( 'NONE', ( 6.538126711041613200, -31.05844110485119500, 25.52781170503875100 ) ) ; +#6302 = CARTESIAN_POINT ( 'NONE', ( 4.849604375360058000, -10.01030339717064000, 22.66968200243135100 ) ) ; +#6303 = CARTESIAN_POINT ( 'NONE', ( 37.50612277688591000, -10.00000000000000400, 20.58325762762470400 ) ) ; +#6304 = DIRECTION ( 'NONE', ( -0.9997660285782041800, -0.01900642951089433900, -0.01032684551123205100 ) ) ; +#6305 = CARTESIAN_POINT ( 'NONE', ( 39.85747980481088600, -10.57008078075642400, 11.08927100264596500 ) ) ; +#6306 = VERTEX_POINT ( 'NONE', #10602 ) ; +#6307 = CARTESIAN_POINT ( 'NONE', ( 5.597828306602989000, -21.98987969427098200, -21.16631056290224000 ) ) ; +#6308 = CARTESIAN_POINT ( 'NONE', ( 5.924800988314134800, -10.00000000000000500, 23.84904246151585400 ) ) ; +#6309 = CARTESIAN_POINT ( 'NONE', ( 37.86483207853907400, -29.41891771981580600, 21.66084199703861700 ) ) ; +#6310 = CARTESIAN_POINT ( 'NONE', ( 30.75617147320465600, -31.01955393663811100, 27.14727995261046800 ) ) ; +#6311 = CARTESIAN_POINT ( 'NONE', ( 4.514220822691438400, -22.23763737398753200, 15.24622290821511300 ) ) ; +#6312 = CARTESIAN_POINT ( 'NONE', ( 8.336870520871857000, -30.65381713404384500, 26.84223953530396400 ) ) ; +#6313 = CARTESIAN_POINT ( 'NONE', ( 36.14951174386855800, -30.75280942294952900, 22.30792297552056200 ) ) ; +#6314 = ORIENTED_EDGE ( 'NONE', *, *, #9890, .T. ) ; +#6315 = CARTESIAN_POINT ( 'NONE', ( 2.499999999998020700, -92.96541870103243400, 0.9151443176143361200 ) ) ; +#6316 = EDGE_CURVE ( 'NONE', #13724, #14178, #5072, .T. ) ; +#6317 = CARTESIAN_POINT ( 'NONE', ( 4.574601178264373400, -30.70719283209723100, 24.04999573191680900 ) ) ; +#6318 = CARTESIAN_POINT ( 'NONE', ( 2.971865829037161300, -29.92734082028270100, 19.49139426586952700 ) ) ; +#6319 = CARTESIAN_POINT ( 'NONE', ( 23.48764966474671900, -89.20772034663129100, 11.03354182247858100 ) ) ; +#6320 = CARTESIAN_POINT ( 'NONE', ( 7.467774449270481400E-013, -9.706927154039602700, 19.37953533632330000 ) ) ; +#6321 = ORIENTED_EDGE ( 'NONE', *, *, #13131, .T. ) ; +#6322 = CARTESIAN_POINT ( 'NONE', ( 11.17667102820642500, -9.851496151715599200, -24.99999999999999600 ) ) ; +#6323 = VECTOR ( 'NONE', #9772, 1000.000000000000000 ) ; +#6324 = CARTESIAN_POINT ( 'NONE', ( 29.14468546114365600, -30.79551319451951800, 27.81882534484560000 ) ) ; +#6325 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -21.31474371111574900, -12.77000429653486800 ) ) ; +#6326 = CARTESIAN_POINT ( 'NONE', ( 25.43368693110417700, -28.03492977300870200, 27.28352477699320400 ) ) ; +#6327 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -99.99999999999998600, 21.63057173623876000 ) ) ; +#6328 = CARTESIAN_POINT ( 'NONE', ( 35.49237573168841200, -30.96137452123473800, 23.31850659743100700 ) ) ; +#6329 = CARTESIAN_POINT ( 'NONE', ( 3.367329074002976900, -30.48841573460928000, 21.53980882785363300 ) ) ; +#6330 = CARTESIAN_POINT ( 'NONE', ( 9.191493342695373800, -100.0000000000000300, -35.18610464165196600 ) ) ; +#6331 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -12.50000000000000400, 7.564513562858103900 ) ) ; +#6332 = VERTEX_POINT ( 'NONE', #3881 ) ; +#6333 = CARTESIAN_POINT ( 'NONE', ( 32.45978386028018300, -29.91900202175492800, 26.38048804696445200 ) ) ; +#6334 = CARTESIAN_POINT ( 'NONE', ( 8.254117647561658400, -8.121210766575385900, 25.00000000000000000 ) ) ; +#6335 = CARTESIAN_POINT ( 'NONE', ( 0.3018686473203229200, -11.20747458928116700, 9.995277648474287300 ) ) ; +#6336 = CARTESIAN_POINT ( 'NONE', ( 12.54104190258624700, -12.49999999999994300, -21.91632012548773600 ) ) ; +#6337 = VECTOR ( 'NONE', #5996, 1000.000000000000000 ) ; +#6338 = VERTEX_POINT ( 'NONE', #7242 ) ; +#6339 = CARTESIAN_POINT ( 'NONE', ( 3.172396214625686100, -95.07596123493895800, -0.5259895963430109000 ) ) ; +#6340 = LINE ( 'NONE', #6623, #3541 ) ; +#6341 = CARTESIAN_POINT ( 'NONE', ( 13.77366070571894100, -15.06254600648959800, 24.03310829294041900 ) ) ; +#6342 = DIRECTION ( 'NONE', ( -1.000000000000000000, 4.336808689942017100E-017, -3.637980486335569100E-032 ) ) ; +#6343 = CARTESIAN_POINT ( 'NONE', ( 13.85351310171892100, -95.07596123493894400, 9.573790652947977300 ) ) ; +#6344 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.00000000000000000, -19.99999999999999600 ) ) ; +#6345 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998600, -12.50000000000001200, 22.05918254822885400 ) ) ; +#6346 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#6347 = CARTESIAN_POINT ( 'NONE', ( 8.883155972205642600, -16.03491413995485700, -26.06411818909203100 ) ) ; +#6348 = CARTESIAN_POINT ( 'NONE', ( 10.24051402253538400, -30.64064827029114100, 27.63557845698244000 ) ) ; +#6349 = CARTESIAN_POINT ( 'NONE', ( 35.09325481767880500, -29.59954989686797000, 24.51390695265781600 ) ) ; +#6350 = CARTESIAN_POINT ( 'NONE', ( 9.834520760945066400, -23.87022975781720300, 17.37978528809510000 ) ) ; +#6351 = CARTESIAN_POINT ( 'NONE', ( 15.39648462930493300, -25.65038001508839500, 22.13090628727211100 ) ) ; +#6352 = FACE_OUTER_BOUND ( 'NONE', #13618, .T. ) ; +#6353 = ADVANCED_FACE ( 'NONE', ( #4777 ), #11971, .F. ) ; +#6354 = ORIENTED_EDGE ( 'NONE', *, *, #246, .F. ) ; +#6355 = CARTESIAN_POINT ( 'NONE', ( 2.198771577102534500, -18.79519291926503400, 8.003168736934238600 ) ) ; +#6356 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 8.200000000000013500, -17.49999999999999600 ) ) ; +#6357 = CARTESIAN_POINT ( 'NONE', ( 6.430818259409642600, -30.28789107152975300, 25.82030146524342500 ) ) ; +#6358 = DIRECTION ( 'NONE', ( -0.9998119252976104300, -0.01909902633348413800, -0.003367673647854568900 ) ) ; +#6359 = CARTESIAN_POINT ( 'NONE', ( 32.62098150831251800, -11.87884565983992700, 21.91157373371942500 ) ) ; +#6360 = CARTESIAN_POINT ( 'NONE', ( 23.30601710274912700, -32.11937065057061600, 21.11003699856940200 ) ) ; +#6361 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -24.23648177666926200, 19.98972415240891800 ) ) ; +#6362 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -99.99999999999998600, 6.630571736238761300 ) ) ; +#6363 = ORIENTED_EDGE ( 'NONE', *, *, #9314, .F. ) ; +#6364 = CARTESIAN_POINT ( 'NONE', ( 8.516424986954207900, -20.34576391012003400, -23.83214069723109700 ) ) ; +#6365 = CARTESIAN_POINT ( 'NONE', ( 11.65523585644385600, -9.999999999997234200, 24.78303360084230900 ) ) ; +#6366 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6367 = CARTESIAN_POINT ( 'NONE', ( 30.67112466210796000, -30.66135960094540600, 27.28753511180299500 ) ) ; +#6368 = CARTESIAN_POINT ( 'NONE', ( 2.521728496074914000, -27.76489945217298300, 11.31706600803147500 ) ) ; +#6369 = CARTESIAN_POINT ( 'NONE', ( 8.374164099981966200, -30.14760290932190400, 26.85315132586280400 ) ) ; +#6370 = CARTESIAN_POINT ( 'NONE', ( 36.74137229537570400, -29.49264596626798600, 22.75248931341247500 ) ) ; +#6371 = FACE_OUTER_BOUND ( 'NONE', #4007, .T. ) ; +#6372 = ORIENTED_EDGE ( 'NONE', *, *, #13855, .T. ) ; +#6373 = EDGE_CURVE ( 'NONE', #10725, #12439, #4899, .T. ) ; +#6374 = CARTESIAN_POINT ( 'NONE', ( 4.574591498935429700, -29.60901217762700800, 24.24364179403123000 ) ) ; +#6375 = CARTESIAN_POINT ( 'NONE', ( 25.01335475599928400, -17.09755543981854200, -26.25149052111409600 ) ) ; +#6376 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -30.86101731591739700, 26.28307327246300300 ) ) ; +#6377 = EDGE_LOOP ( 'NONE', ( #11793, #11899, #12943, #13186, #1548, #4467 ) ) ; +#6378 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -7.511547099454120700, 20.00000000000000400 ) ) ; +#6379 = CARTESIAN_POINT ( 'NONE', ( 29.14576656664008400, -30.86029712451873100, 27.80620004346019800 ) ) ; +#6380 = CARTESIAN_POINT ( 'NONE', ( 36.81757824937783100, -18.67551597833308800, -17.24048218021220400 ) ) ; +#6381 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141288800, -28.87043262030351800, 21.75755471859919500 ) ) ; +#6382 = CARTESIAN_POINT ( 'NONE', ( 7.772109745456421400, -99.99999999999998600, 19.85362497496259600 ) ) ; +#6383 = CARTESIAN_POINT ( 'NONE', ( 34.47057335796393600, -31.12026100721111300, 24.49202002218259400 ) ) ; +#6384 = CARTESIAN_POINT ( 'NONE', ( 2.602934489829399600, -29.45207892460073000, 21.72303377207392900 ) ) ; +#6385 = VECTOR ( 'NONE', #8250, 1000.000000000000000 ) ; +#6386 = CARTESIAN_POINT ( 'NONE', ( 14.21012092569722000, -20.28809933266904900, -23.89441359543428700 ) ) ; +#6387 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999991100, -97.57596123493894400, 0.8682408883346195400 ) ) ; +#6388 = CARTESIAN_POINT ( 'NONE', ( 32.54370455985728200, -30.58343130173459600, 26.40828166169301400 ) ) ; +#6389 = CARTESIAN_POINT ( 'NONE', ( 11.76201308279915000, -11.26208799513757000, 24.54509666472947400 ) ) ; +#6390 = CARTESIAN_POINT ( 'NONE', ( 0.1168582489852309600, -10.46743299594086100, 11.16861644275499200 ) ) ; +#6391 = CARTESIAN_POINT ( 'NONE', ( 16.33079726011566600, -12.49999999999998000, -14.25049965031157700 ) ) ; +#6392 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #115, #13408, #13451, #6759 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.098207849904213600, 3.106784327629069900 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9999938703452127000, 0.9999938703452127000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#6393 = EDGE_LOOP ( 'NONE', ( #2722, #7483 ) ) ; +#6394 = EDGE_CURVE ( 'NONE', #1758, #11069, #4601, .T. ) ; +#6395 = CARTESIAN_POINT ( 'NONE', ( 17.64039441766890100, -33.35446909076587500, 26.50697697917620100 ) ) ; +#6396 = CARTESIAN_POINT ( 'NONE', ( 8.303172057946103000, -89.38768284283594300, 7.844758748653493500 ) ) ; +#6397 = CARTESIAN_POINT ( 'NONE', ( 16.25950190395791500, -93.17319108795248900, 22.83432233971726800 ) ) ; +#6398 = CARTESIAN_POINT ( 'NONE', ( 22.86346581479930200, -19.58905459709492900, 23.30919095504569300 ) ) ; +#6399 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -89.20772034660431900, 11.03354182248334700 ) ) ; +#6400 = CARTESIAN_POINT ( 'NONE', ( 11.90120101019032000, -10.58758902355032900, -25.10360779842005400 ) ) ; +#6401 = CARTESIAN_POINT ( 'NONE', ( 10.44455048188189700, -30.86054564654420300, 27.67128190404650900 ) ) ; +#6402 = CARTESIAN_POINT ( 'NONE', ( 35.20443476195216400, -30.61553845564983000, 24.44230470560257000 ) ) ; +#6403 = AXIS2_PLACEMENT_3D ( 'NONE', #3012, #4068, #6366 ) ; +#6404 = CARTESIAN_POINT ( 'NONE', ( 22.57347623597518500, -19.89847195717275200, 23.25457145115144200 ) ) ; +#6405 = CARTESIAN_POINT ( 'NONE', ( 15.46052052525143800, -20.78609619553549600, -24.23814175040130400 ) ) ; +#6406 = CARTESIAN_POINT ( 'NONE', ( 37.79857499854667700, -18.80570000581312200, 7.860836001971481600 ) ) ; +#6407 = ORIENTED_EDGE ( 'NONE', *, *, #5728, .T. ) ; +#6408 = CARTESIAN_POINT ( 'NONE', ( 2.397843812658525800, -19.58612658696907600, 7.999119625875309200 ) ) ; +#6409 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6410 = CARTESIAN_POINT ( 'NONE', ( 6.749949179436748100, -31.16875863475655700, 25.58198774234203300 ) ) ; +#6411 = CARTESIAN_POINT ( 'NONE', ( 10.74396930607307100, -17.46748415198588200, -26.31671893400574200 ) ) ; +#6412 = CARTESIAN_POINT ( 'NONE', ( 28.34474019256317200, -9.999999999997232400, 24.78304050401379800 ) ) ; +#6413 = CARTESIAN_POINT ( 'NONE', ( 27.32329978544715800, -39.02155075754075100, 19.07620989343453700 ) ) ; +#6414 = CARTESIAN_POINT ( 'NONE', ( 3.753733620207695000, -28.94330330952213300, 22.40174405415560700 ) ) ; +#6415 = CARTESIAN_POINT ( 'NONE', ( 11.19896521564827000, -99.99999999999995700, 4.926333178542768600 ) ) ; +#6416 = EDGE_CURVE ( 'NONE', #8954, #6575, #7836, .T. ) ; +#6417 = CARTESIAN_POINT ( 'NONE', ( 11.28231297985415100, -18.46296335773273600, -25.97658159169631600 ) ) ; +#6418 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992900, -97.24871113334013700, 12.92967346628286900 ) ) ; +#6419 = CARTESIAN_POINT ( 'NONE', ( 30.65963744761613100, -30.98828310433837900, 27.20258586622557900 ) ) ; +#6420 = CARTESIAN_POINT ( 'NONE', ( 8.439244873388137300, -30.79053289120743400, 26.85725049933272900 ) ) ; +#6421 = CARTESIAN_POINT ( 'NONE', ( 36.28011525286921600, -30.66642059249598900, 22.52057611592278300 ) ) ; +#6422 = DIRECTION ( 'NONE', ( -0.2403982332060423100, 0.0000000000000000000, 0.9706743477971452300 ) ) ; +#6423 = ORIENTED_EDGE ( 'NONE', *, *, #5535, .T. ) ; +#6424 = CARTESIAN_POINT ( 'NONE', ( 4.940006835430813800, -31.00222390850305800, 23.96585614708964200 ) ) ; +#6425 = CARTESIAN_POINT ( 'NONE', ( 34.59405744790170400, -94.84225388344604800, 15.05231055712388500 ) ) ; +#6426 = CARTESIAN_POINT ( 'NONE', ( 34.27247027527853600, -20.26494875385442600, -21.03343125420137100 ) ) ; +#6427 = CARTESIAN_POINT ( 'NONE', ( 24.17246928401983300, -18.70791473039630800, 23.44215057971633300 ) ) ; +#6428 = ADVANCED_FACE ( 'NONE', ( #4460 ), #3703, .T. ) ; +#6429 = CARTESIAN_POINT ( 'NONE', ( 24.60866461655624000, -31.21608550868627300, 28.66555962968096700 ) ) ; +#6430 = CARTESIAN_POINT ( 'NONE', ( 33.13311349613052000, -31.16972185420738100, 25.67459477903674500 ) ) ; +#6431 = CARTESIAN_POINT ( 'NONE', ( 3.571647729387766200, -30.57994866077125800, 21.58622717507202900 ) ) ; +#6432 = VECTOR ( 'NONE', #9228, 1000.000000000000000 ) ; +#6433 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -18.70000000000001400 ) ) ; +#6434 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -95.43443845998484700, 21.53726769629899400 ) ) ; +#6435 = EDGE_CURVE ( 'NONE', #12439, #13932, #2206, .T. ) ; +#6436 = CARTESIAN_POINT ( 'NONE', ( 32.45956634138026000, -31.14757811497537400, 26.16348849098153600 ) ) ; +#6437 = APPROVAL_DATE_TIME ( #6752, #13943 ) ; +#6438 = CARTESIAN_POINT ( 'NONE', ( 3.954772682880515000, -28.99145423308367200, 22.80624301476674300 ) ) ; +#6439 = VERTEX_POINT ( 'NONE', #4184 ) ; +#6440 = CARTESIAN_POINT ( 'NONE', ( 2.593944355009004400, -21.39350171348699100, -13.73954508335199900 ) ) ; +#6441 = CARTESIAN_POINT ( 'NONE', ( 0.0004546597110628309600, -10.00181863884419700, 10.20667325790887500 ) ) ; +#6442 = CARTESIAN_POINT ( 'NONE', ( 11.12199419488739400, -21.00756797382814500, -22.66069346640545800 ) ) ; +#6443 = CARTESIAN_POINT ( 'NONE', ( -0.5359043907162993600, -95.07596123493894400, 4.526934840690820700 ) ) ; +#6444 = FACE_OUTER_BOUND ( 'NONE', #5479, .T. ) ; +#6445 = CARTESIAN_POINT ( 'NONE', ( 9.812341505444939200, -97.48839365139409100, 20.97473870223505400 ) ) ; +#6446 = CARTESIAN_POINT ( 'NONE', ( 34.59632490130395200, -94.84620998259715900, 15.03935203264004300 ) ) ; +#6447 = CARTESIAN_POINT ( 'NONE', ( 10.44473598721512700, -30.73328109311926300, 27.69495781765775500 ) ) ; +#6448 = CARTESIAN_POINT ( 'NONE', ( 34.62738451282263700, -29.36037099458642500, 24.67230252007686200 ) ) ; +#6449 = ORIENTED_EDGE ( 'NONE', *, *, #8374, .F. ) ; +#6450 = CARTESIAN_POINT ( 'NONE', ( 3.153460749591418600, -30.17568802037646600, 20.32819529289965400 ) ) ; +#6451 = CARTESIAN_POINT ( 'NONE', ( 6.877010363097875600, -21.58495280521210100, -18.53426292422153000 ) ) ; +#6452 = EDGE_CURVE ( 'NONE', #14211, #2348, #4587, .T. ) ; +#6453 = CARTESIAN_POINT ( 'NONE', ( 34.52524706999627600, -94.72219806545337000, 15.44556310733653600 ) ) ; +#6454 = CARTESIAN_POINT ( 'NONE', ( 2.501307934945315100, -20.39234476730032600, 8.174240919146599900 ) ) ; +#6455 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23251461448897400, -11.67660596385688600 ) ) ; +#6456 = CARTESIAN_POINT ( 'NONE', ( 6.604669513218818900, -30.50283280462006600, 25.91724961072504000 ) ) ; +#6457 = CARTESIAN_POINT ( 'NONE', ( 11.07006513627843000, -20.31965248253389700, -25.58879922172408400 ) ) ; +#6458 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -97.04531648070948800, 16.23785755017195600 ) ) ; +#6459 = CARTESIAN_POINT ( 'NONE', ( 31.94835864033589000, -32.35799559909959600, 26.08288648906884800 ) ) ; +#6460 = CARTESIAN_POINT ( 'NONE', ( 4.255911154469250100, -29.06107037833409700, 23.29317587231301800 ) ) ; +#6461 = CARTESIAN_POINT ( 'NONE', ( 5.316543822095354700, -99.99999999999995700, -3.223838349584517100 ) ) ; +#6462 = CARTESIAN_POINT ( 'NONE', ( 15.66400232498304300, -22.45625171486876700, -27.11604584269888100 ) ) ; +#6463 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#6464 = ORIENTED_EDGE ( 'NONE', *, *, #4581, .T. ) ; +#6465 = CARTESIAN_POINT ( 'NONE', ( 30.36686649315082300, -30.58887154399886700, 27.41626609100921300 ) ) ; +#6466 = CARTESIAN_POINT ( 'NONE', ( 34.99999998962731200, -95.07596123493894400, 12.92969265702111400 ) ) ; +#6467 = CARTESIAN_POINT ( 'NONE', ( 8.456576841861799900, -30.27841030603793700, 26.91035514162408800 ) ) ; +#6468 = CARTESIAN_POINT ( 'NONE', ( 36.03267278275447400, -29.19749641294010800, 23.19422194234587700 ) ) ; +#6469 = AXIS2_PLACEMENT_3D ( 'NONE', #6344, #14153, #7482 ) ; +#6470 = ORIENTED_EDGE ( 'NONE', *, *, #6031, .T. ) ; +#6471 = CARTESIAN_POINT ( 'NONE', ( 4.571952042694751300, -30.03964742151936900, 24.47759925788008700 ) ) ; +#6472 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #182, #1903, #9057, #2359, #10185, #3467, #11314, #4580, #12412, #5697, #13516, #1831, #11903, #5177, #13017, #6305, #14117, #7446, #806, #8591, #1905, #9718, #3008, #10854 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004054852271351758700, 0.0008109704542703517500, 0.001013713067837942400, 0.001216455681405532700, 0.001317826988189322900, 0.001419198294973113000, 0.001621940908540697600, 0.001824683522108282700, 0.002027426135675867400, 0.002432911362811040200, 0.003243881817081385300 ), + .UNSPECIFIED. ) ; +#6473 = CARTESIAN_POINT ( 'NONE', ( 31.62623855571325400, -22.21739854300781800, -24.05271085504093900 ) ) ; +#6474 = CARTESIAN_POINT ( 'NONE', ( 36.98588863721910500, -29.11477957310138400, 21.71446928580167300 ) ) ; +#6475 = DIRECTION ( 'NONE', ( -0.01909900421572703600, -0.9998175973836266300, 0.0000000000000000000 ) ) ; +#6476 = ORIENTED_EDGE ( 'NONE', *, *, #14072, .F. ) ; +#6477 = CARTESIAN_POINT ( 'NONE', ( 31.60084719725304200, -31.09302360573238700, 26.69997908373180100 ) ) ; +#6478 = EDGE_CURVE ( 'NONE', #6575, #2471, #4404, .T. ) ; +#6479 = CARTESIAN_POINT ( 'NONE', ( 2.508456141158272000, -29.79221267994405400, 21.72647499524753600 ) ) ; +#6480 = CARTESIAN_POINT ( 'NONE', ( 11.77623080635253800, -11.31600571511082400, 24.51557664052123200 ) ) ; +#6481 = CARTESIAN_POINT ( 'NONE', ( 32.15095928931382500, -30.47721009805696100, 26.62501672117645100 ) ) ; +#6482 = ORIENTED_EDGE ( 'NONE', *, *, #11959, .F. ) ; +#6483 = CARTESIAN_POINT ( 'NONE', ( 9.464352422654339800, -22.27644517439057000, -24.80447300955132000 ) ) ; +#6484 = CARTESIAN_POINT ( 'NONE', ( 11.30446922539778300, -12.49999999999999500, -21.29974061443669300 ) ) ; +#6485 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -1.972066022637282400, 11.18414218126905400 ) ) ; +#6486 = CARTESIAN_POINT ( 'NONE', ( 19.21046654543436800, -27.93256442298492100, 27.46300505893640300 ) ) ; +#6487 = ORIENTED_EDGE ( 'NONE', *, *, #5600, .F. ) ; +#6488 = CARTESIAN_POINT ( 'NONE', ( 7.799492797481331500, -94.73120072039498000, 16.64419714275587800 ) ) ; +#6489 = CARTESIAN_POINT ( 'NONE', ( 38.54128015034315500, -10.31158604672157300, -18.46223377471305200 ) ) ; +#6490 = CARTESIAN_POINT ( 'NONE', ( 29.22646980835626700, -10.99832321828720400, 24.34625236612955100 ) ) ; +#6491 = CARTESIAN_POINT ( 'NONE', ( 10.75135170048740600, -30.87198444334886100, 27.77050091392917300 ) ) ; +#6492 = CARTESIAN_POINT ( 'NONE', ( 34.96031276061000900, -30.36678806245739900, 24.84598523553218300 ) ) ; +#6493 = ORIENTED_EDGE ( 'NONE', *, *, #3834, .T. ) ; +#6494 = EDGE_CURVE ( 'NONE', #8117, #10184, #6297, .T. ) ; +#6495 = CARTESIAN_POINT ( 'NONE', ( 5.001259457691620700, -22.47172799900280900, -12.17724101489384700 ) ) ; +#6496 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 8.200000000000013500, 0.0000000000000000000 ) ) ; +#6497 = ADVANCED_FACE ( 'NONE', ( #4234 ), #4100, .F. ) ; +#6498 = CARTESIAN_POINT ( 'NONE', ( 2.517828144387151300, -21.16951496851365300, 8.541505755410833300 ) ) ; +#6499 = CARTESIAN_POINT ( 'NONE', ( 16.44274183372601800, -94.74682992296713700, 18.71443453778743300 ) ) ; +#6500 = CARTESIAN_POINT ( 'NONE', ( 6.749559492056370400, -29.70048592921313000, 25.84147552694441400 ) ) ; +#6501 = CARTESIAN_POINT ( 'NONE', ( 16.83970000093705000, -21.13616542060867300, -26.96360642528586400 ) ) ; +#6502 = ORIENTED_EDGE ( 'NONE', *, *, #7062, .F. ) ; +#6503 = CARTESIAN_POINT ( 'NONE', ( 31.10349259198751800, -31.41785052285088000, 18.53401340406197300 ) ) ; +#6504 = CARTESIAN_POINT ( 'NONE', ( 5.709042434833892600, -29.41873973964924700, 24.97515918388640400 ) ) ; +#6505 = CARTESIAN_POINT ( 'NONE', ( 12.25477831002141600, -10.34719131787719700, 24.93878080319052500 ) ) ; +#6506 = CARTESIAN_POINT ( 'NONE', ( 37.80217735974012800, -18.79852586024640000, 7.708019967472689700 ) ) ; +#6507 = ORIENTED_EDGE ( 'NONE', *, *, #14149, .T. ) ; +#6508 = CARTESIAN_POINT ( 'NONE', ( 30.36686897801034800, -30.87150479356746000, 27.36643000023313700 ) ) ; +#6509 = VECTOR ( 'NONE', #13879, 1000.000000000000000 ) ; +#6510 = CARTESIAN_POINT ( 'NONE', ( 28.08116180380680800, -20.28809933267076800, -23.00533269934087600 ) ) ; +#6511 = CARTESIAN_POINT ( 'NONE', ( 8.650077677633712300, -30.98088823043453000, 26.88649947493204100 ) ) ; +#6512 = CARTESIAN_POINT ( 'NONE', ( 36.41386637357557300, -30.36879340178842000, 23.06694227910826500 ) ) ; +#6513 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2191, #7846, #5619, #13443 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001983894412344110600 ), + .UNSPECIFIED. ) ; +#6514 = EDGE_CURVE ( 'NONE', #13932, #8784, #4263, .T. ) ; +#6515 = CARTESIAN_POINT ( 'NONE', ( 5.112040533662845800, -31.07259013426053000, 24.05270526333325200 ) ) ; +#6516 = FACE_OUTER_BOUND ( 'NONE', #9060, .T. ) ; +#6517 = CARTESIAN_POINT ( 'NONE', ( 27.78812468159678800, -18.45350068814436600, -26.36097075531842300 ) ) ; +#6518 = CARTESIAN_POINT ( 'NONE', ( 36.98588941751685200, -30.30657462236115800, 21.50432319756496800 ) ) ; +#6519 = ORIENTED_EDGE ( 'NONE', *, *, #5447, .T. ) ; +#6520 = CARTESIAN_POINT ( 'NONE', ( 30.00819922051758600, -30.94719027555725800, 27.48190920136343300 ) ) ; +#6521 = CARTESIAN_POINT ( 'NONE', ( 3.569793220431549700, -28.88655498817890800, 21.88467300591868900 ) ) ; +#6522 = LINE ( 'NONE', #9765, #8460 ) ; +#6523 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -95.80543125211708900, 21.80032795718640800 ) ) ; +#6524 = CARTESIAN_POINT ( 'NONE', ( 32.11054372118897500, -31.04359561975103400, 26.44887277464775700 ) ) ; +#6525 = ORIENTED_EDGE ( 'NONE', *, *, #5512, .T. ) ; +#6526 = CARTESIAN_POINT ( 'NONE', ( 28.81765694146008300, -10.27179695107863100, -25.03303972706654800 ) ) ; +#6527 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, -22.51392627849812200, 7.665449690873519000 ) ) ; +#6528 = CARTESIAN_POINT ( 'NONE', ( 16.10199659513554600, -12.50000000000001200, -14.10906696787478200 ) ) ; +#6529 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#6530 = CIRCLE ( 'NONE', #6854, 2.500000000000002200 ) ; +#6531 = EDGE_CURVE ( 'NONE', #6332, #9622, #12755, .T. ) ; +#6532 = ORIENTED_EDGE ( 'NONE', *, *, #13873, .T. ) ; +#6533 = CARTESIAN_POINT ( 'NONE', ( 3.971971501548596400, -93.11565661403993500, 19.26789702203470600 ) ) ; +#6534 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6535 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561060996500, 7.000000000000000000, -20.68999999999999400 ) ) ; +#6536 = CARTESIAN_POINT ( 'NONE', ( 10.75254218460774400, -30.79350931228517400, 27.78634501717896700 ) ) ; +#6537 = CARTESIAN_POINT ( 'NONE', ( 34.61292343790509600, -31.10694064151358200, 24.34872613502266600 ) ) ; +#6538 = EDGE_LOOP ( 'NONE', ( #3202, #14374, #13343 ) ) ; +#6539 = CARTESIAN_POINT ( 'NONE', ( 22.58382876621447000, -12.50000000000000500, 10.14164662623410600 ) ) ; +#6540 = CARTESIAN_POINT ( 'NONE', ( 33.75008252401978800, -31.16164428281289700, 25.16873596130020700 ) ) ; +#6541 = CARTESIAN_POINT ( 'NONE', ( 2.325087860865202100, -18.84093847744740900, 9.885272484993576500 ) ) ; +#6542 = CARTESIAN_POINT ( 'NONE', ( 39.94315431089011500, -7.499999994601933100, 20.87260321498582300 ) ) ; +#6543 = CARTESIAN_POINT ( 'NONE', ( 6.714430243611979600, -30.71426395740715200, 25.91367306371183300 ) ) ; +#6544 = CARTESIAN_POINT ( 'NONE', ( 22.40395277378103200, -27.96340406021230900, 27.45756719881665800 ) ) ; +#6545 = CIRCLE ( 'NONE', #5734, 2.500000000000000000 ) ; +#6546 = VERTEX_POINT ( 'NONE', #13309 ) ; +#6547 = AXIS2_PLACEMENT_3D ( 'NONE', #9746, #11852, #12964 ) ; +#6548 = CARTESIAN_POINT ( 'NONE', ( 34.13907163757072300, -36.13860968187174900, 14.78079515440241400 ) ) ; +#6549 = CARTESIAN_POINT ( 'NONE', ( 8.173184192539345400, -30.09153811735678000, 26.74774908288542700 ) ) ; +#6550 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6551 = CARTESIAN_POINT ( 'NONE', ( 37.49969998480031600, -21.22397276667383500, 7.887115997236525900 ) ) ; +#6552 = ORIENTED_EDGE ( 'NONE', *, *, #5963, .T. ) ; +#6553 = CARTESIAN_POINT ( 'NONE', ( 30.16241248170563700, -30.53850444910232700, 27.49627600578807200 ) ) ; +#6554 = CARTESIAN_POINT ( 'NONE', ( 31.94962244991852200, -100.0000000000000300, -34.01313420148405000 ) ) ; +#6555 = CARTESIAN_POINT ( 'NONE', ( 8.635663902877606500, -30.51862271530104200, 26.99982766273716100 ) ) ; +#6556 = CARTESIAN_POINT ( 'NONE', ( 35.70834670187593200, -29.07218849542741500, 23.35062434075676700 ) ) ; +#6557 = EDGE_CURVE ( 'NONE', #8784, #9514, #12323, .T. ) ; +#6558 = LINE ( 'NONE', #9346, #6337 ) ; +#6559 = CARTESIAN_POINT ( 'NONE', ( 4.706174834114809100, -30.32285548737754900, 24.57785058355700900 ) ) ; +#6560 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6561 = CARTESIAN_POINT ( 'NONE', ( 24.29643484756019600, -20.43188370212736900, -26.76266447569797100 ) ) ; +#6562 = ADVANCED_FACE ( 'NONE', ( #3938 ), #3753, .T. ) ; +#6563 = CARTESIAN_POINT ( 'NONE', ( 25.13106760410404000, -33.23184938068383300, 26.36754739010808300 ) ) ; +#6564 = ORIENTED_EDGE ( 'NONE', *, *, #12987, .T. ) ; +#6565 = AXIS2_PLACEMENT_3D ( 'NONE', #14121, #7450, #811 ) ; +#6566 = CARTESIAN_POINT ( 'NONE', ( 0.3226449443118326000, -11.29057977724726300, 9.738761650130676600 ) ) ; +#6567 = CARTESIAN_POINT ( 'NONE', ( 2.761965392316463800, -30.15880746721325100, 21.77273951963120900 ) ) ; +#6568 = CARTESIAN_POINT ( 'NONE', ( 24.01553940514606500, -18.34995431400063400, 23.52767776675869300 ) ) ; +#6569 = CARTESIAN_POINT ( 'NONE', ( 31.93564830728239200, -30.26237398742722800, 26.72370120032974200 ) ) ; +#6570 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122093500, -0.1736481776669230600 ) ) ; +#6571 = CARTESIAN_POINT ( 'NONE', ( 5.100037150828516300, -22.72618090473083200, 9.185805685253935600 ) ) ; +#6572 = CARTESIAN_POINT ( 'NONE', ( 8.900146771411392900, -21.24175023401576800, -20.99080168829160100 ) ) ; +#6573 = CARTESIAN_POINT ( 'NONE', ( 3.563047072445625600, -26.23069907378867100, 6.814795083930966300 ) ) ; +#6574 = EDGE_CURVE ( 'NONE', #11069, #1758, #8586, .T. ) ; +#6575 = VERTEX_POINT ( 'NONE', #12246 ) ; +#6576 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #5181, #6309, #10859, #4123 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9599737919958504200, 0.9599737919958504200, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#6577 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.00000000000000000, 20.00000000000000000 ) ) ; +#6578 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000102300, -20.00134532382584900, -11.57666287985435700 ) ) ; +#6579 = CARTESIAN_POINT ( 'NONE', ( 10.75129825716316900, -30.72471432365377800, 27.79635792410002900 ) ) ; +#6580 = CARTESIAN_POINT ( 'NONE', ( 34.76497432306305100, -30.14646951801810800, 25.01141395416020100 ) ) ; +#6581 = AXIS2_PLACEMENT_3D ( 'NONE', #9029, #2326, #10152 ) ; +#6582 = CARTESIAN_POINT ( 'NONE', ( 24.59977126134113200, -24.21166195632885400, 19.81365596803575000 ) ) ; +#6583 = CARTESIAN_POINT ( 'NONE', ( 33.82657129807876100, -30.14532178902553700, 25.63877402068816700 ) ) ; +#6584 = CARTESIAN_POINT ( 'NONE', ( 36.13814555316325500, -9.947542219070529200, 24.89781251723063700 ) ) ; +#6585 = CARTESIAN_POINT ( 'NONE', ( 37.49985135141303500, -20.90584113545117600, 7.928522130265841700 ) ) ; +#6586 = CARTESIAN_POINT ( 'NONE', ( 2.764133395003349300, -19.55369477908694600, 11.35004217365371400 ) ) ; +#6587 = CARTESIAN_POINT ( 'NONE', ( 6.784864480752102800, -29.90152046944292200, 25.94998322277498200 ) ) ; +#6588 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3597, #8156, #9280 ), + ( #2579, #10400, #3689 ), + ( #11535, #4800, #12634 ), + ( #5926, #13737, #7058 ), + ( #437, #8207, #1537 ), + ( #9330, #2624, #10450 ), + ( #3739, #11579, #4843 ), + ( #12685, #5978, #13782 ), + ( #7103, #489, #8252 ), + ( #1578, #9376, #2673 ), + ( #10500, #3786, #11627 ), + ( #4888, #12730, #6027 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002568877798975024800, 0.005137755597950049600, 0.006422194497437562500, 0.007706633396925074500, 0.01027551119590009900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7936328294987459200, 1.000000000000000000), + ( 1.000000000000000000, 0.7934432254984727900, 1.000000000000000000), + ( 1.000000000000000000, 0.7932385553364290600, 1.000000000000000000), + ( 1.000000000000000000, 0.7926572192637212400, 1.000000000000000000), + ( 1.000000000000000000, 0.7923011216590477600, 1.000000000000000000), + ( 1.000000000000000000, 0.7916379614461694900, 1.000000000000000000), + ( 1.000000000000000000, 0.7913967904755242500, 1.000000000000000000), + ( 1.000000000000000000, 0.7908281920455920700, 1.000000000000000000), + ( 1.000000000000000000, 0.7905030025546679900, 1.000000000000000000), + ( 1.000000000000000000, 0.7892765309398364100, 1.000000000000000000), + ( 1.000000000000000000, 0.7882507581014149800, 1.000000000000000000), + ( 1.000000000000000000, 0.7865975011629552400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#6589 = VECTOR ( 'NONE', #7629, 1000.000000000000000 ) ; +#6590 = CARTESIAN_POINT ( 'NONE', ( 37.36655562704127200, -29.01046481468681600, 15.85157161389920300 ) ) ; +#6591 = LINE ( 'NONE', #6115, #42 ) ; +#6592 = CARTESIAN_POINT ( 'NONE', ( 9.561507030161379800, -30.45421547766191100, 27.39046967089377900 ) ) ; +#6593 = VERTEX_POINT ( 'NONE', #11188 ) ; +#6594 = EDGE_CURVE ( 'NONE', #1999, #3860, #3884, .T. ) ; +#6595 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.118500028541946600, 12.94756879232178200 ) ) ; +#6596 = CARTESIAN_POINT ( 'NONE', ( 37.50058998016849200, -20.40325587946412600, 7.936389685755683500 ) ) ; +#6597 = CARTESIAN_POINT ( 'NONE', ( 30.16684265234164600, -30.77996407014407200, 27.46753421128798300 ) ) ; +#6598 = CARTESIAN_POINT ( 'NONE', ( 34.58415707349906400, -20.28809933267076800, -14.86533601242712200 ) ) ; +#6599 = CARTESIAN_POINT ( 'NONE', ( 8.756996654644867200, -31.06236771034521700, 26.89954676813607600 ) ) ; +#6600 = CARTESIAN_POINT ( 'NONE', ( 36.35769620243232200, -30.08109775151728400, 23.40422818979157100 ) ) ; +#6601 = CARTESIAN_POINT ( 'NONE', ( 15.96734478967071200, -30.69526457898068000, 28.85086468269785700 ) ) ; +#6602 = FACE_OUTER_BOUND ( 'NONE', #7064, .T. ) ; +#6603 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000002100, -97.04531648070940300, 16.23785755017191700 ) ) ; +#6604 = CARTESIAN_POINT ( 'NONE', ( 5.095255387381203400, -29.29167360474668100, 24.38320336555503300 ) ) ; +#6605 = CARTESIAN_POINT ( 'NONE', ( 12.91147742623698800, -95.07596123493894400, 15.95758058754439400 ) ) ; +#6606 = VERTEX_POINT ( 'NONE', #13394 ) ; +#6607 = CARTESIAN_POINT ( 'NONE', ( 26.00066813880626200, -20.01385634412526200, 22.81368892163734000 ) ) ; +#6608 = CARTESIAN_POINT ( 'NONE', ( 5.391369446246115700, -10.03110382723334100, 22.84467013172059100 ) ) ; +#6609 = CARTESIAN_POINT ( 'NONE', ( 38.35330670124058400, -10.13145910719490100, -18.98029328923495000 ) ) ; +#6610 = CARTESIAN_POINT ( 'NONE', ( 3.328360923280016000, -29.01289465977733100, 21.97786730736423500 ) ) ; +#6611 = CARTESIAN_POINT ( 'NONE', ( 22.62214289193928400, -22.42231662136372300, -27.19038958324956900 ) ) ; +#6612 = CARTESIAN_POINT ( 'NONE', ( 31.94858057552275800, -30.81923268578224300, 26.65122040314648900 ) ) ; +#6613 = DIRECTION ( 'NONE', ( 4.336808689942017700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#6614 = CARTESIAN_POINT ( 'NONE', ( 28.93967145878826100, -30.79944509475890500, 27.88167507187385400 ) ) ; +#6615 = CARTESIAN_POINT ( 'NONE', ( 39.03884269063815500, -9.901466397326412800, 14.01608990457791700 ) ) ; +#6616 = CARTESIAN_POINT ( 'NONE', ( 11.23069057388779200, -24.00208898172016700, 18.32202130511829500 ) ) ; +#6617 = CARTESIAN_POINT ( 'NONE', ( 9.035325379896374200, -12.50000000000021300, -19.65759865654319700 ) ) ; +#6618 = DIRECTION ( 'NONE', ( 0.7175207942195444000, -0.6859551209197429800, -0.1209523953732837600 ) ) ; +#6619 = ORIENTED_EDGE ( 'NONE', *, *, #8199, .T. ) ; +#6620 = CARTESIAN_POINT ( 'NONE', ( 37.47326281626904900, -28.11322739275723800, 11.72532574267247100 ) ) ; +#6621 = ORIENTED_EDGE ( 'NONE', *, *, #13667, .T. ) ; +#6622 = AXIS2_PLACEMENT_3D ( 'NONE', #905, #12059, #13173 ) ; +#6623 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#6624 = CARTESIAN_POINT ( 'NONE', ( 34.49687183876388000, -31.06981552413613900, 24.55248735933770000 ) ) ; +#6625 = CARTESIAN_POINT ( 'NONE', ( 26.34384038529480800, -12.49999999999942600, 21.46586721483246800 ) ) ; +#6626 = CARTESIAN_POINT ( 'NONE', ( 33.73352571620454700, -31.00804944691569500, 25.35790808199053000 ) ) ; +#6627 = CARTESIAN_POINT ( 'NONE', ( 28.68813440735806400, -11.14063917059208100, 24.45614895767085900 ) ) ; +#6628 = ADVANCED_FACE ( 'NONE', ( #4252 ), #7183, .F. ) ; +#6629 = ORIENTED_EDGE ( 'NONE', *, *, #12404, .T. ) ; +#6630 = CARTESIAN_POINT ( 'NONE', ( 3.258765851214922000, -20.17847023525465400, 12.78442960502921000 ) ) ; +#6631 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6632 = CARTESIAN_POINT ( 'NONE', ( 6.962834251925106500, -31.01625038221730100, 25.88005565817419700 ) ) ; +#6633 = CARTESIAN_POINT ( 'NONE', ( 0.8693403112492018600, -10.53232264286314500, -16.66154968999956100 ) ) ; +#6634 = CARTESIAN_POINT ( 'NONE', ( 36.86851722924126300, -29.39978470367526200, 10.84315608312301800 ) ) ; +#6635 = EDGE_CURVE ( 'NONE', #9123, #1747, #3519, .T. ) ; +#6636 = CARTESIAN_POINT ( 'NONE', ( 27.88342561975716900, -10.04489301683390000, 24.99208414988678600 ) ) ; +#6637 = CARTESIAN_POINT ( 'NONE', ( 23.33308423735437700, -100.0000000000000100, -38.36942826376122900 ) ) ; +#6638 = VERTEX_POINT ( 'NONE', #4464 ) ; +#6639 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5534, #6668, #72, #7811, #1162, #8948, #2248, #10073, #3353, #11200 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.002600091540643808500, 0.005200183081287615200, 0.007800274621931422400, 0.01040036616257522900 ), + .UNSPECIFIED. ) ; +#6640 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -9.620210057388984400, 18.56039536978575900 ) ) ; +#6641 = CARTESIAN_POINT ( 'NONE', ( 37.60224815837409600, -19.58636709961924200, 7.975020706623299200 ) ) ; +#6642 = CARTESIAN_POINT ( 'NONE', ( 29.75896620674322800, -30.61504613626788500, 27.63795326326815900 ) ) ; +#6643 = CARTESIAN_POINT ( 'NONE', ( 8.731335213690764300, -30.64907495942145100, 27.02956525932772200 ) ) ; +#6644 = CARTESIAN_POINT ( 'NONE', ( 35.70699275220504600, -30.90705493022347400, 23.02688052196562300 ) ) ; +#6645 = ORIENTED_EDGE ( 'NONE', *, *, #4284, .F. ) ; +#6646 = AXIS2_PLACEMENT_3D ( 'NONE', #1857, #9665, #2959 ) ; +#6647 = CARTESIAN_POINT ( 'NONE', ( 2.201676013430891500, -18.80829955863197600, -11.64667185389664500 ) ) ; +#6648 = ADVANCED_FACE ( 'NONE', ( #3737 ), #3409, .T. ) ; +#6649 = CARTESIAN_POINT ( 'NONE', ( 30.33888070863024900, -20.37058582451953000, 20.96007980121024900 ) ) ; +#6650 = CARTESIAN_POINT ( 'NONE', ( 5.115180163470062000, -30.65209421057223700, 24.71839589455892400 ) ) ; +#6651 = EDGE_LOOP ( 'NONE', ( #7149, #7364, #7571, #7745, #7908, #5529, #13469, #2315, #4054, #9838 ) ) ; +#6652 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -7.500000000000000000, 20.00000000000000000 ) ) ; +#6653 = CARTESIAN_POINT ( 'NONE', ( 12.36867011245676000, -32.98722133800549000, 25.92342224682839800 ) ) ; +#6654 = EDGE_CURVE ( 'NONE', #6306, #9976, #3587, .T. ) ; +#6655 = CARTESIAN_POINT ( 'NONE', ( 37.95101341908515700, -11.90490581701812700, -18.81585457842075500 ) ) ; +#6656 = CARTESIAN_POINT ( 'NONE', ( 3.346606403259168700, -30.50515229330358100, 21.77127175128250900 ) ) ; +#6657 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11151, #3300, #5526, #13360, #6661, #66, #7805, #1156, #8940, #2240 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002669436744463665500, 0.005338873488927331000, 0.008008310233391000400, 0.01067774697785467100 ), + .UNSPECIFIED. ) ; +#6658 = CARTESIAN_POINT ( 'NONE', ( 29.14211217109104600, -20.24282922367497100, -25.48820991027519900 ) ) ; +#6659 = ORIENTED_EDGE ( 'NONE', *, *, #2473, .T. ) ; +#6660 = CARTESIAN_POINT ( 'NONE', ( 31.62710975032576900, -30.15919918948887400, 26.85457397013563300 ) ) ; +#6661 = CARTESIAN_POINT ( 'NONE', ( 1.202551208664197800, -10.44131258544331000, 15.83433243988363300 ) ) ; +#6662 = CARTESIAN_POINT ( 'NONE', ( 28.93967206796062200, -30.83281604722006400, 27.87579066795741800 ) ) ; +#6663 = CARTESIAN_POINT ( 'NONE', ( 36.44130635019299500, -28.87894815033263300, 21.82387652162530900 ) ) ; +#6664 = CARTESIAN_POINT ( 'NONE', ( 33.49588073418461000, -10.00000000000000000, 21.88316959378730800 ) ) ; +#6665 = CARTESIAN_POINT ( 'NONE', ( 2.139825959223075300, -11.92115515658135500, -18.99951088126236300 ) ) ; +#6666 = CARTESIAN_POINT ( 'NONE', ( 15.45839132199143900, -12.50000000000001200, -13.46044297428279700 ) ) ; +#6667 = ORIENTED_EDGE ( 'NONE', *, *, #11192, .T. ) ; +#6668 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.816809207785603100, 10.78485060478760000 ) ) ; +#6669 = LINE ( 'NONE', #2724, #6385 ) ; +#6670 = CARTESIAN_POINT ( 'NONE', ( 3.489301749493644700, -30.19302375042105200, 23.11864727814409200 ) ) ; +#6671 = CARTESIAN_POINT ( 'NONE', ( 0.5926768096117038800, -9.901180707973361800, 12.84504997725257000 ) ) ; +#6672 = EDGE_LOOP ( 'NONE', ( #7610, #8765, #11923, #10392, #11393, #103, #3690, #13501, #13506, #2341 ) ) ; +#6673 = CARTESIAN_POINT ( 'NONE', ( 0.8459022141192436000, -11.40604631313701800, -15.74678317270911500 ) ) ; +#6674 = CARTESIAN_POINT ( 'NONE', ( 34.30873363949272900, -29.83967090645935000, 25.22918325985860100 ) ) ; +#6675 = CARTESIAN_POINT ( 'NONE', ( 23.39246382821132600, -12.50000000000001800, 9.971891011230560800 ) ) ; +#6676 = EDGE_CURVE ( 'NONE', #9976, #10684, #1065, .T. ) ; +#6677 = CARTESIAN_POINT ( 'NONE', ( 33.56285515674775900, -29.81569291010998400, 25.70311165005439900 ) ) ; +#6678 = CIRCLE ( 'NONE', #28, 2.500000000000000400 ) ; +#6679 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#6680 = ORIENTED_EDGE ( 'NONE', *, *, #13344, .T. ) ; +#6681 = CARTESIAN_POINT ( 'NONE', ( 4.027814460978627900, -20.66502302463650100, 14.66029169718659600 ) ) ; +#6682 = CARTESIAN_POINT ( 'NONE', ( 9.883882328255403100, -95.07596123493893000, 15.53820665460144600 ) ) ; +#6683 = CARTESIAN_POINT ( 'NONE', ( 37.22419363255802000, -30.10038250862135500, 9.162746654964813300 ) ) ; +#6684 = CARTESIAN_POINT ( 'NONE', ( 6.899003241893548300, -30.27044226599120000, 26.11111310764926000 ) ) ; +#6685 = CARTESIAN_POINT ( 'NONE', ( -2.490161939497359500E-008, -10.00000000622538500, -11.53324907984514000 ) ) ; +#6686 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524034600, 6.754920151478380300 ) ) ; +#6687 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4260, #8725, #5364, #13205 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001872366595206070100 ), + .UNSPECIFIED. ) ; +#6688 = CARTESIAN_POINT ( 'NONE', ( 17.45405457413378900, -33.17879905958957900, 28.41295234537445700 ) ) ; +#6689 = CARTESIAN_POINT ( 'NONE', ( 30.78778345452908400, -100.0000000000000100, -35.17784268884943800 ) ) ; +#6690 = AXIS2_PLACEMENT_3D ( 'NONE', #13487, #6794, #196 ) ; +#6691 = CARTESIAN_POINT ( 'NONE', ( 16.33707368133795900, -19.18949841699706500, 23.36467695346053800 ) ) ; +#6692 = CARTESIAN_POINT ( 'NONE', ( 37.80116965879113900, -18.79526926619596600, 8.009736582490878800 ) ) ; +#6693 = CARTESIAN_POINT ( 'NONE', ( 29.75989258966087900, -30.75781202198550100, 27.62068034367720100 ) ) ; +#6694 = CARTESIAN_POINT ( 'NONE', ( 0.07775222879382673300, 10.13028869250944000, -0.7113565082297220700 ) ) ; +#6695 = CARTESIAN_POINT ( 'NONE', ( 8.757065286252675700, -30.24923946814847800, 27.04277464311130800 ) ) ; +#6696 = CARTESIAN_POINT ( 'NONE', ( 36.03625037480637200, -29.85282309133295100, 23.78114124443023100 ) ) ; +#6697 = FACE_OUTER_BOUND ( 'NONE', #8234, .T. ) ; +#6698 = ORIENTED_EDGE ( 'NONE', *, *, #3230, .F. ) ; +#6699 = EDGE_CURVE ( 'NONE', #5247, #6960, #3516, .T. ) ; +#6700 = CARTESIAN_POINT ( 'NONE', ( 37.08663038965657700, -24.62457167050407100, 10.82093184137064200 ) ) ; +#6701 = CARTESIAN_POINT ( 'NONE', ( 5.210047304359410900, -29.66428112482292100, 24.79267413351694300 ) ) ; +#6702 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -19.99999999999981900, 7.788262581895197400 ) ) ; +#6703 = ORIENTED_EDGE ( 'NONE', *, *, #524, .T. ) ; +#6704 = CARTESIAN_POINT ( 'NONE', ( 30.37913522776213100, -95.07596123493898700, 15.43661663570717100 ) ) ; +#6705 = CARTESIAN_POINT ( 'NONE', ( 36.91580505055383600, -10.00000000000000400, 21.25354223425587500 ) ) ; +#6706 = CARTESIAN_POINT ( 'NONE', ( 17.50067652823596400, -19.90706702945584200, 23.25319916115336800 ) ) ; +#6707 = CARTESIAN_POINT ( 'NONE', ( 2.781594098091659400, -29.35299023099228000, 21.96732078666175900 ) ) ; +#6708 = CIRCLE ( 'NONE', #190, 7.499999999999997300 ) ; +#6709 = ORIENTED_EDGE ( 'NONE', *, *, #1247, .T. ) ; +#6710 = CARTESIAN_POINT ( 'NONE', ( 29.05257542530072400, -97.49622431010489300, 21.28016276984889600 ) ) ; +#6711 = CARTESIAN_POINT ( 'NONE', ( 31.66249167959719900, -30.67337001288255700, 26.83844285245016400 ) ) ; +#6712 = DIRECTION ( 'NONE', ( 0.2103059029574847700, 0.0000000000000000000, 0.9776356310922984500 ) ) ; +#6713 = CARTESIAN_POINT ( 'NONE', ( 28.83711757718358400, -30.80801433609676500, 27.91106723108940800 ) ) ; +#6714 = CARTESIAN_POINT ( 'NONE', ( 37.49999319098374400, -29.66368374373667300, 21.68613441352640700 ) ) ; +#6715 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -2.499999999999999600, -24.99999999999999600 ) ) ; +#6716 = CARTESIAN_POINT ( 'NONE', ( 6.228449913984854400, -21.75087847038654200, -17.34841623847646400 ) ) ; +#6717 = CARTESIAN_POINT ( 'NONE', ( 36.24309991432600200, -99.99999999999997200, 17.91936059322234000 ) ) ; +#6718 = ORIENTED_EDGE ( 'NONE', *, *, #12189, .T. ) ; +#6719 = CARTESIAN_POINT ( 'NONE', ( 4.108904108076433000, -29.08885266895915900, 23.17926409002631200 ) ) ; +#6720 = CARTESIAN_POINT ( 'NONE', ( 17.67434850467460400, -9.904351252611267100, 25.84110433792760400 ) ) ; +#6721 = ADVANCED_FACE ( 'NONE', ( #3248 ), #3188, .F. ) ; +#6722 = CARTESIAN_POINT ( 'NONE', ( 31.24206733759335100, -12.50000000000082200, -19.39736881152762400 ) ) ; +#6723 = CARTESIAN_POINT ( 'NONE', ( 10.17157806891461600, -38.43448292188914200, 18.08984355045520000 ) ) ; +#6724 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12340, #8932, #155, #7889 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -9.730691804220980100E-006, 0.0008199335665031967900 ), + .UNSPECIFIED. ) ; +#6725 = CARTESIAN_POINT ( 'NONE', ( 34.30875841248930400, -30.82747416648775000, 25.05500477806234700 ) ) ; +#6726 = CARTESIAN_POINT ( 'NONE', ( 28.05872909029945800, -24.05443956311651700, 18.69412797395270300 ) ) ; +#6727 = CARTESIAN_POINT ( 'NONE', ( 33.64706448824846800, -30.69197737825704300, 25.66954464946110900 ) ) ; +#6728 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#6729 = ORIENTED_EDGE ( 'NONE', *, *, #5902, .F. ) ; +#6730 = CARTESIAN_POINT ( 'NONE', ( 5.419788758891861000, -19.02812493782893500, 17.40016945602892700 ) ) ; +#6731 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.00000000000000000, -19.99999999999999600 ) ) ; +#6732 = CARTESIAN_POINT ( 'NONE', ( 33.18175115121692200, -36.88767626987984000, 15.73392382070920300 ) ) ; +#6733 = CARTESIAN_POINT ( 'NONE', ( 7.096091553637520200, -31.16243775643443200, 25.84759396884340900 ) ) ; +#6734 = CARTESIAN_POINT ( 'NONE', ( 34.35586862908939300, -100.0000000000000100, -2.045551259989161900 ) ) ; +#6735 = CARTESIAN_POINT ( 'NONE', ( 2.847921880307920700, -92.25051266406956100, 0.8498699502921417400 ) ) ; +#6736 = CARTESIAN_POINT ( 'NONE', ( 12.01197093312148600, -32.81865161009900300, 27.80148718332048600 ) ) ; +#6737 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -99.99999999999998600, -25.63802908547507900 ) ) ; +#6738 = CARTESIAN_POINT ( 'NONE', ( 37.49716979476478700, -21.20606676028402400, 8.095165859862003500 ) ) ; +#6739 = CARTESIAN_POINT ( 'NONE', ( 29.75902683802836900, -30.91862817367778900, 27.58483251159813300 ) ) ; +#6740 = CARTESIAN_POINT ( 'NONE', ( 2.616381136047589700, -28.34694075020001900, 15.54415901022950000 ) ) ; +#6741 = CARTESIAN_POINT ( 'NONE', ( 8.930732389551433700, -30.75674802519238300, 27.09800442661673300 ) ) ; +#6742 = CARTESIAN_POINT ( 'NONE', ( 35.64530247146834100, -30.85004555010049600, 23.38098543413863700 ) ) ; +#6743 = ORIENTED_EDGE ( 'NONE', *, *, #3601, .F. ) ; +#6744 = CARTESIAN_POINT ( 'NONE', ( 12.38069353928797000, -30.79000797847548700, 28.24582219572248600 ) ) ; +#6745 = EDGE_CURVE ( 'NONE', #9514, #1086, #3236, .T. ) ; +#6746 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -10.06772555652650200, -24.99999999999999600 ) ) ; +#6747 = CARTESIAN_POINT ( 'NONE', ( 5.460623318594906900, -31.00434680772762200, 24.61147712929438200 ) ) ; +#6748 = CARTESIAN_POINT ( 'NONE', ( 2.499080799766995900, -19.99632319906783500, 7.963505047754344100 ) ) ; +#6749 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.520606794341276200, 25.00000000000000000 ) ) ; +#6750 = AXIS2_PLACEMENT_3D ( 'NONE', #13066, #6358, #14166 ) ; +#6751 = CARTESIAN_POINT ( 'NONE', ( 3.673289138447932700, -30.65919470195298000, 21.91645590058590900 ) ) ; +#6752 = DATE_AND_TIME ( #6770, #7100 ) ; +#6753 = CARTESIAN_POINT ( 'NONE', ( 35.15039562463993400, -10.01030339717065100, 22.66968200243133700 ) ) ; +#6754 = CARTESIAN_POINT ( 'NONE', ( 31.62531814940495400, -31.09489141756172300, 26.68581690033408200 ) ) ; +#6755 = CARTESIAN_POINT ( 'NONE', ( 22.70646146725074700, -24.23630610140096000, 19.98846279027704400 ) ) ; +#6756 = CARTESIAN_POINT ( 'NONE', ( 28.83675209095034100, -30.82371042351869400, 27.90840604281975600 ) ) ; +#6757 = CARTESIAN_POINT ( 'NONE', ( 36.44313859005410400, -30.56490635415247000, 21.52652657879120600 ) ) ; +#6758 = ORIENTED_EDGE ( 'NONE', *, *, #8772, .F. ) ; +#6759 = CARTESIAN_POINT ( 'NONE', ( 2.202743003830879500, -18.81097201532339400, 8.005331014629296900 ) ) ; +#6760 = CARTESIAN_POINT ( 'NONE', ( 6.567281779677595700, -12.50000000000004800, -16.56723698598159400 ) ) ; +#6761 = CARTESIAN_POINT ( 'NONE', ( 5.031829946249130700, -12.50000000000007600, 11.32439776516831600 ) ) ; +#6762 = CARTESIAN_POINT ( 'NONE', ( 2.565267375226572000, -11.97726608438731500, -19.83275942158790200 ) ) ; +#6763 = EDGE_CURVE ( 'NONE', #6960, #13608, #2616, .T. ) ; +#6764 = CARTESIAN_POINT ( 'NONE', ( 3.929396007719510900, -30.60994407006289100, 23.21485940257581100 ) ) ; +#6765 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8136, #9360, #2654, #10484, #3771, #11611 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001220098343905792100, 0.002440196687811584100 ), + .UNSPECIFIED. ) ; +#6766 = CIRCLE ( 'NONE', #721, 7.500000000000001800 ) ; +#6767 = CARTESIAN_POINT ( 'NONE', ( 9.534748526347540200, -10.00000000000000400, 23.87496225496913400 ) ) ; +#6768 = CARTESIAN_POINT ( 'NONE', ( 24.09390138667813400, -12.49999999999999300, -13.95795463158289000 ) ) ; +#6769 = CARTESIAN_POINT ( 'NONE', ( 3.631151151218440900, -32.97668935711077200, 11.58703871389287500 ) ) ; +#6770 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#6771 = CARTESIAN_POINT ( 'NONE', ( 34.01903356491379800, -29.55931476172626700, 25.26813747221033400 ) ) ; +#6772 = ORIENTED_EDGE ( 'NONE', *, *, #10075, .F. ) ; +#6773 = CARTESIAN_POINT ( 'NONE', ( 29.25754645555487700, -12.49999999999993800, 20.08380946433780800 ) ) ; +#6774 = CARTESIAN_POINT ( 'NONE', ( 33.41936395848946300, -29.65418492143311000, 25.71381143426917100 ) ) ; +#6775 = CARTESIAN_POINT ( 'NONE', ( 6.493389686272238700, -19.48359387916843100, 18.50072333831780500 ) ) ; +#6776 = CARTESIAN_POINT ( 'NONE', ( 40.07780226992137100, -12.49878906808779700, -19.99999999999999600 ) ) ; +#6777 = CARTESIAN_POINT ( 'NONE', ( 6.977043128400861600, -30.48253377954440800, 26.15551096517274500 ) ) ; +#6778 = CARTESIAN_POINT ( 'NONE', ( 27.70916246864324600, -100.0000000000000100, 5.479840347243296600 ) ) ; +#6779 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6780 = LINE ( 'NONE', #2526, #6432 ) ; +#6781 = CARTESIAN_POINT ( 'NONE', ( 7.654180147610255800, -32.12807391804604900, 24.22852741492749500 ) ) ; +#6782 = CARTESIAN_POINT ( 'NONE', ( 10.79372443248705000, -10.47700258479130200, -25.03473862787760100 ) ) ; +#6783 = EDGE_CURVE ( 'NONE', #6977, #4810, #3071, .T. ) ; +#6784 = CARTESIAN_POINT ( 'NONE', ( 37.49323053886713100, -20.38052653891891800, 8.429328580711759500 ) ) ; +#6785 = ORIENTED_EDGE ( 'NONE', *, *, #3726, .T. ) ; +#6786 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6787 = CARTESIAN_POINT ( 'NONE', ( 8.944972031274470900, -30.36198718782990400, 27.13508375666685900 ) ) ; +#6788 = CARTESIAN_POINT ( 'NONE', ( 35.71468501450075200, -29.43737223907840700, 23.81705431692527600 ) ) ; +#6789 = CARTESIAN_POINT ( 'NONE', ( 28.15833095305989900, -28.91241948390103600, 28.45823485386163300 ) ) ; +#6790 = ADVANCED_FACE ( 'NONE', ( #3204 ), #10326, .F. ) ; +#6791 = DIRECTION ( 'NONE', ( 0.01909913463758368700, 0.9998175948922359800, 9.251858538542971800E-016 ) ) ; +#6792 = CARTESIAN_POINT ( 'NONE', ( 5.242131399120485600, -30.10720557867229600, 25.01028022012368600 ) ) ; +#6793 = CARTESIAN_POINT ( 'NONE', ( 15.32618382925488200, -12.50000000000002000, 8.837766434441562100 ) ) ; +#6794 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6795 = CARTESIAN_POINT ( 'NONE', ( 37.22886108201398500, -28.55475341078042800, 23.68146251458976100 ) ) ; +#6796 = ORIENTED_EDGE ( 'NONE', *, *, #8266, .F. ) ; +#6797 = CARTESIAN_POINT ( 'NONE', ( 2.625261970825231800, -29.72719435497762700, 22.05478291415417000 ) ) ; +#6798 = CARTESIAN_POINT ( 'NONE', ( 22.31280616483238800, -30.65917406624146600, 28.85723021296910300 ) ) ; +#6799 = CARTESIAN_POINT ( 'NONE', ( 31.56324487682833500, -30.56617393369279500, 26.90305322371215600 ) ) ; +#6800 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.781278341185187100, -27.49999999999999600 ) ) ; +#6801 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#6802 = CARTESIAN_POINT ( 'NONE', ( 37.26753461392614500, -29.32998097421061700, 21.80821307343771000 ) ) ; +#6803 = EDGE_LOOP ( 'NONE', ( #1008, #3580, #4299, #1509 ) ) ; +#6804 = CARTESIAN_POINT ( 'NONE', ( 27.70278130556853900, -20.12134721044430900, 22.27694826346777300 ) ) ; +#6805 = CARTESIAN_POINT ( 'NONE', ( 15.13519798751411300, -12.50000000000000200, 8.400649254801773900 ) ) ; +#6806 = CARTESIAN_POINT ( 'NONE', ( 9.784861605238738500, -12.66549609558534700, -25.08649169343631900 ) ) ; +#6807 = CARTESIAN_POINT ( 'NONE', ( 3.929362345349764100, -29.41450491416495800, 23.42411124678424300 ) ) ; +#6808 = EDGE_LOOP ( 'NONE', ( #6841, #6884, #7059, #7167, #1438, #7356 ) ) ; +#6809 = CARTESIAN_POINT ( 'NONE', ( 4.681075518882459500, -19.77259783685038700, 16.02398149413956600 ) ) ; +#6810 = AXIS2_PLACEMENT_3D ( 'NONE', #6254, #14065, #7390 ) ; +#6811 = CARTESIAN_POINT ( 'NONE', ( 30.16547923903962000, -21.12977024218080000, -21.78795980581810800 ) ) ; +#6812 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -27.09143239524033600, 6.754920151478383000 ) ) ; +#6813 = CARTESIAN_POINT ( 'NONE', ( 34.21101946961457000, -30.52039986828515000, 25.34239296007422800 ) ) ; +#6814 = ORIENTED_EDGE ( 'NONE', *, *, #5133, .T. ) ; +#6815 = CARTESIAN_POINT ( 'NONE', ( 23.72788201485254000, -12.50000000000002100, 9.809634288791302800 ) ) ; +#6816 = CARTESIAN_POINT ( 'NONE', ( 33.57733024848637600, -30.48307617493268000, 25.79821227624999100 ) ) ; +#6817 = CARTESIAN_POINT ( 'NONE', ( 10.85517000176762500, -30.81499859066117300, 27.81532162226113100 ) ) ; +#6818 = CARTESIAN_POINT ( 'NONE', ( 8.373333410865107900, -19.83591480132652800, 20.16456919888130300 ) ) ; +#6819 = CARTESIAN_POINT ( 'NONE', ( 34.57857472328273500, -12.50000000000046000, -13.91701606723317600 ) ) ; +#6820 = CARTESIAN_POINT ( 'NONE', ( 7.096399162890352700, -29.79489960907551100, 26.08824971630425100 ) ) ; +#6821 = ORIENTED_EDGE ( 'NONE', *, *, #5621, .T. ) ; +#6822 = EDGE_CURVE ( 'NONE', #1680, #9917, #2895, .T. ) ; +#6823 = CARTESIAN_POINT ( 'NONE', ( 2.771098100360263100, -28.55458998826388100, 23.68115763974561400 ) ) ; +#6824 = CARTESIAN_POINT ( 'NONE', ( 6.249180779589987200, -11.87947142616859600, 21.00930970886038600 ) ) ; +#6825 = CARTESIAN_POINT ( 'NONE', ( 37.56238098411510200, -19.57550927521762000, 9.086688013965647000 ) ) ; +#6826 = ORIENTED_EDGE ( 'NONE', *, *, #10916, .T. ) ; +#6827 = VECTOR ( 'NONE', #6061, 1000.000000000000000 ) ; +#6828 = CARTESIAN_POINT ( 'NONE', ( 14.33917067425394100, -14.87376955440769100, 24.14062292980247200 ) ) ; +#6829 = CARTESIAN_POINT ( 'NONE', ( 9.037345042195644500, -30.91504713356875200, 27.09694712830537000 ) ) ; +#6830 = CARTESIAN_POINT ( 'NONE', ( 35.86072482040848500, -30.52335925224894800, 23.72036925418312600 ) ) ; +#6831 = CARTESIAN_POINT ( 'NONE', ( 32.38537447723561500, -28.34762686872433000, 24.83247041180677800 ) ) ; +#6832 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11333, #3487, #4605, #12434, #5720, #13536, #6848, #237, #7989, #1329, #9125, #2419 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( -0.002572984129758315600, -0.001679933330985193000, -0.0007868825322120702400, 0.0001061682665610525500, 0.0005526936659476125300, 0.0009992190653341729400 ), + .UNSPECIFIED. ) ; +#6833 = EDGE_LOOP ( 'NONE', ( #13810, #14118 ) ) ; +#6834 = CARTESIAN_POINT ( 'NONE', ( 24.01553940258971700, -18.34995431250877500, 23.52767776702176800 ) ) ; +#6835 = CARTESIAN_POINT ( 'NONE', ( 5.847776115622208300, -31.14499629766697800, 24.80591496870801300 ) ) ; +#6836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#6837 = FACE_OUTER_BOUND ( 'NONE', #8921, .T. ) ; +#6838 = CARTESIAN_POINT ( 'NONE', ( 7.126048855187102400, -23.46668171881972100, 14.49679971129038100 ) ) ; +#6839 = CARTESIAN_POINT ( 'NONE', ( 0.4461797633564026900, -11.78471905342553900, 8.290050457837933700 ) ) ; +#6840 = CARTESIAN_POINT ( 'NONE', ( 33.98479108369948400, -31.61998521983244700, 23.27373466634694000 ) ) ; +#6841 = ORIENTED_EDGE ( 'NONE', *, *, #1790, .T. ) ; +#6842 = EDGE_CURVE ( 'NONE', #1086, #2364, #5111, .T. ) ; +#6843 = CARTESIAN_POINT ( 'NONE', ( 3.675115258735683000, -28.92387296075044700, 22.22299756354556900 ) ) ; +#6844 = LINE ( 'NONE', #10599, #6827 ) ; +#6845 = CARTESIAN_POINT ( 'NONE', ( 39.96147338300495000, 6.290457506769964600, -20.63080313393614800 ) ) ; +#6846 = CARTESIAN_POINT ( 'NONE', ( 14.53867488856405500, -31.29892962639993600, 28.59572076646743400 ) ) ; +#6847 = CARTESIAN_POINT ( 'NONE', ( 31.53461922755931100, -31.05677243471168600, 26.75505243260308700 ) ) ; +#6848 = CARTESIAN_POINT ( 'NONE', ( 29.37555945467422400, -10.07396740429955500, -25.00000000000000000 ) ) ; +#6849 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#6850 = CARTESIAN_POINT ( 'NONE', ( 36.70185297854481400, -30.46644739658926300, 21.60686339009378500 ) ) ; +#6851 = CARTESIAN_POINT ( 'NONE', ( 30.16548286124116600, -27.15669239249314900, 19.87850274211541200 ) ) ; +#6852 = CARTESIAN_POINT ( 'NONE', ( 6.229735010081338200, -23.24976665741824200, 12.94269545090054100 ) ) ; +#6853 = CARTESIAN_POINT ( 'NONE', ( 3.718694079496021500, -30.68478251634949300, 22.01585921281000000 ) ) ; +#6854 = AXIS2_PLACEMENT_3D ( 'NONE', #3034, #2903, #10742 ) ; +#6855 = CARTESIAN_POINT ( 'NONE', ( 4.424619774354868100, -30.90937041482468600, 23.32850185772467500 ) ) ; +#6856 = FACE_OUTER_BOUND ( 'NONE', #5396, .T. ) ; +#6857 = CARTESIAN_POINT ( 'NONE', ( 15.49088475106760200, -12.50000000000000500, -13.54242547507206500 ) ) ; +#6858 = EDGE_LOOP ( 'NONE', ( #11781, #9130 ) ) ; +#6859 = CIRCLE ( 'NONE', #7007, 2.499999999999998700 ) ; +#6860 = CARTESIAN_POINT ( 'NONE', ( 28.79666937972249500, -12.49999999999993200, -21.24168535385596400 ) ) ; +#6861 = CARTESIAN_POINT ( 'NONE', ( 37.43493169167078300, -96.92159152404075000, 12.92977595461171300 ) ) ; +#6862 = CARTESIAN_POINT ( 'NONE', ( 33.74909378579580700, -29.56202605690128500, 25.44942842654892700 ) ) ; +#6863 = ORIENTED_EDGE ( 'NONE', *, *, #7296, .T. ) ; +#6864 = CARTESIAN_POINT ( 'NONE', ( 29.39420287299578800, -23.94726483026370900, 17.92927266212435100 ) ) ; +#6865 = EDGE_CURVE ( 'NONE', #4395, #4810, #2699, .T. ) ; +#6866 = CARTESIAN_POINT ( 'NONE', ( 33.41895676860458800, -31.16855197209434200, 25.44620056336598400 ) ) ; +#6867 = CARTESIAN_POINT ( 'NONE', ( 10.85409977209730800, -30.74983432565778700, 27.82561304812444200 ) ) ; +#6868 = CARTESIAN_POINT ( 'NONE', ( 10.08264944760258300, -20.11592199458874900, 21.23343109947396500 ) ) ; +#6869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6870 = CARTESIAN_POINT ( 'NONE', ( 24.94849798758248100, -12.50000000000003900, -12.49300187040866200 ) ) ; +#6871 = CARTESIAN_POINT ( 'NONE', ( 7.268175423298075100, -30.67033110812800000, 26.27916551125895900 ) ) ; +#6872 = CIRCLE ( 'NONE', #6646, 1.200000000000012600 ) ; +#6873 = CARTESIAN_POINT ( 'NONE', ( 39.13065968874993000, -10.53232264285009400, -16.66154968999914100 ) ) ; +#6874 = ORIENTED_EDGE ( 'NONE', *, *, #3513, .T. ) ; +#6875 = DIRECTION ( 'NONE', ( -2.602085213965210100E-016, -1.040834085586066100E-015, 1.000000000000000000 ) ) ; +#6876 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#6877 = CARTESIAN_POINT ( 'NONE', ( 0.4734153224019237400, -11.89366128960763500, 8.005331014629295100 ) ) ; +#6878 = CARTESIAN_POINT ( 'NONE', ( 37.59953517341750000, -18.85349712984787000, 10.39388701073597300 ) ) ; +#6879 = ORIENTED_EDGE ( 'NONE', *, *, #9965, .F. ) ; +#6880 = CARTESIAN_POINT ( 'NONE', ( 9.032329183796553800, -30.54414843970594600, 27.17382814204286100 ) ) ; +#6881 = CARTESIAN_POINT ( 'NONE', ( 35.34068857409409500, -29.18436708908907900, 23.87646095848719700 ) ) ; +#6882 = CARTESIAN_POINT ( 'NONE', ( 36.50926761273390000, -31.36225577060126200, 23.81452863448555800 ) ) ; +#6883 = FACE_OUTER_BOUND ( 'NONE', #5589, .T. ) ; +#6884 = ORIENTED_EDGE ( 'NONE', *, *, #4300, .T. ) ; +#6885 = CARTESIAN_POINT ( 'NONE', ( 26.22636636998712600, -15.06256185862206100, 24.03310535267235100 ) ) ; +#6886 = CARTESIAN_POINT ( 'NONE', ( 5.592616362094673800, -30.39211412666061200, 25.24760861272754300 ) ) ; +#6887 = CARTESIAN_POINT ( 'NONE', ( 6.544634507030585800, -12.49999999999959100, 15.66237843449789000 ) ) ; +#6888 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#6889 = CARTESIAN_POINT ( 'NONE', ( 29.16265809121182100, -30.78559131984587800, 27.85752956920978100 ) ) ; +#6890 = ORIENTED_EDGE ( 'NONE', *, *, #7890, .T. ) ; +#6891 = CARTESIAN_POINT ( 'NONE', ( 2.791221343412569200, -30.08436615634362000, 22.10483268990084900 ) ) ; +#6892 = CARTESIAN_POINT ( 'NONE', ( 17.50727461886180700, -27.99003030185990300, 27.51045287396561900 ) ) ; +#6893 = CARTESIAN_POINT ( 'NONE', ( 31.35760135341662600, -30.41340599351037400, 27.00436321785442600 ) ) ; +#6894 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#6895 = CARTESIAN_POINT ( 'NONE', ( 36.67145930383700400, -29.01307444512302800, 21.97933023787125600 ) ) ; +#6896 = CARTESIAN_POINT ( 'NONE', ( 13.45067698649139500, -22.03500000000001400, 19.69869958977434600 ) ) ; +#6897 = CARTESIAN_POINT ( 'NONE', ( 35.26534394986423800, -28.85816096546468400, 23.83786115663073300 ) ) ; +#6898 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #329, #8082, #1417 ), + ( #9216, #2513, #10329 ), + ( #3623, #11470, #4731 ), + ( #12568, #5862, #13674 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 3.252606517456513300E-018, 6.112832822669250400E-005 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941476793044252000, 1.000000000000000000), + ( 1.000000000000000000, 0.7941422074671488100, 1.000000000000000000), + ( 1.000000000000000000, 0.7941353925969090200, 1.000000000000000000), + ( 1.000000000000000000, 0.7941272348423913400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#6899 = CARTESIAN_POINT ( 'NONE', ( 5.386749691625482200, -31.10686359130856400, 24.34857568447225200 ) ) ; +#6900 = CARTESIAN_POINT ( 'NONE', ( 3.948905446682438500, -29.89823323407348400, 23.78042888798097800 ) ) ; +#6901 = EDGE_CURVE ( 'NONE', #9900, #3054, #2877, .T. ) ; +#6902 = CARTESIAN_POINT ( 'NONE', ( 30.56491672462325900, -16.56984214946689700, -26.15844042994676100 ) ) ; +#6903 = CARTESIAN_POINT ( 'NONE', ( 25.43167299497881500, -19.57320768689963600, 23.05487293056751600 ) ) ; +#6904 = EDGE_LOOP ( 'NONE', ( #9844, #6287, #167, #475, #10751, #6785 ) ) ; +#6905 = CARTESIAN_POINT ( 'NONE', ( 28.22708405291032500, -11.31670901952078600, 24.51466126102341600 ) ) ; +#6906 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000900, 14.31000000000000900 ) ) ; +#6907 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -95.07596123493894400, 0.8682408883346195400 ) ) ; +#6908 = CARTESIAN_POINT ( 'NONE', ( 23.81943837680208600, -12.49999999999999800, -14.16167542880393500 ) ) ; +#6909 = EDGE_CURVE ( 'NONE', #9631, #14226, #2835, .T. ) ; +#6910 = CARTESIAN_POINT ( 'NONE', ( 37.79806299610735500, -10.00000000000089000, -20.05343113588263600 ) ) ; +#6911 = CARTESIAN_POINT ( 'NONE', ( 33.94056861719833100, -30.33654384272697200, 25.57254099056961000 ) ) ; +#6912 = CARTESIAN_POINT ( 'NONE', ( 30.49205269852029000, -12.50000000000017100, 19.18609030085709900 ) ) ; +#6913 = CARTESIAN_POINT ( 'NONE', ( 33.38701699808773100, -30.31501840016271700, 25.93848913500585200 ) ) ; +#6914 = CARTESIAN_POINT ( 'NONE', ( 11.06021006908832800, -30.83280396762252100, 27.87575492069937900 ) ) ; +#6915 = CARTESIAN_POINT ( 'NONE', ( 11.80943235064990700, -19.15543943887957600, 22.29208461846278100 ) ) ; +#6916 = CARTESIAN_POINT ( 'NONE', ( 5.919287643488601700, -21.84814308849150400, -16.64981205562215300 ) ) ; +#6917 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#6918 = CARTESIAN_POINT ( 'NONE', ( 34.59881068684132500, -22.06410025030592000, -15.10133422768641700 ) ) ; +#6919 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998600, -21.17506671135420500, 30.64523381671439100 ) ) ; +#6920 = CARTESIAN_POINT ( 'NONE', ( 15.03112530504657400, -12.50000000000002700, 7.978280021017941900 ) ) ; +#6921 = AXIS2_PLACEMENT_3D ( 'NONE', #4991, #12836, #2627 ) ; +#6922 = CARTESIAN_POINT ( 'NONE', ( 24.03855918547889200, -12.50000000000002000, 9.602761255014334200 ) ) ; +#6923 = CARTESIAN_POINT ( 'NONE', ( 4.373098691557434100, -95.07596123493895800, 13.66591453372637400 ) ) ; +#6924 = CARTESIAN_POINT ( 'NONE', ( 36.85388214537482600, -20.86195063178787400, 12.27553369498090100 ) ) ; +#6925 = CARTESIAN_POINT ( 'NONE', ( 39.87559197015355000, -10.00000000000000000, -13.97421303432718500 ) ) ; +#6926 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#6927 = CARTESIAN_POINT ( 'NONE', ( 9.243082836950801400, -31.01101469846217600, 27.15053504561812000 ) ) ; +#6928 = CARTESIAN_POINT ( 'NONE', ( 35.80507385577951900, -30.23756226377663500, 24.06118840238473700 ) ) ; +#6929 = EDGE_CURVE ( 'NONE', #13132, #6338, #2658, .T. ) ; +#6930 = LINE ( 'NONE', #5854, #12890 ) ; +#6931 = ADVANCED_FACE ( 'NONE', ( #2670 ), #25, .F. ) ; +#6932 = CARTESIAN_POINT ( 'NONE', ( 27.06993106930785900, -11.79503796356002000, 24.68348637562841200 ) ) ; +#6933 = CYLINDRICAL_SURFACE ( 'NONE', #1022, 10.00000000000000200 ) ; +#6934 = CARTESIAN_POINT ( 'NONE', ( 5.847151791266058200, -29.45747845805157200, 25.10425107234870300 ) ) ; +#6935 = ORIENTED_EDGE ( 'NONE', *, *, #11230, .T. ) ; +#6936 = CARTESIAN_POINT ( 'NONE', ( 11.76044685354238900, -9.781278341213386800, -27.50000000000500200 ) ) ; +#6937 = CARTESIAN_POINT ( 'NONE', ( 23.92756766868366500, -33.13796828529600400, 28.38544437411350400 ) ) ; +#6938 = CARTESIAN_POINT ( 'NONE', ( 3.531329226146979300, -29.01456881785330200, 22.30347490766048300 ) ) ; +#6939 = CARTESIAN_POINT ( 'NONE', ( 31.35760111148901100, -30.89549416834397300, 26.91936289099233900 ) ) ; +#6940 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, -19.99999999999999600 ) ) ; +#6941 = CARTESIAN_POINT ( 'NONE', ( 37.23810033987584200, -30.15865373359281400, 21.77198077075041700 ) ) ; +#6942 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3988, #4199, #6440, #14241, #7573, #925, #8715, #2028, #9839, #3132, #10983, #4246, #12078, #5352, #13193, #6483, #14283, #7620, #969, #8757, #2067, #9887, #3176, #11023 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.411962612463446100E-017, 0.002976119131586047800, 0.004464178697379066000, 0.005952238263172086000, 0.008928357394758133800, 0.01041641696055116100, 0.01190447652634418400, 0.01488059565793023300, 0.01636865522372326500, 0.01785671478951629200, 0.02083283392110236000, 0.02380895305268842400 ), + .UNSPECIFIED. ) ; +#6943 = CIRCLE ( 'NONE', #1719, 10.00000000000000200 ) ; +#6944 = CARTESIAN_POINT ( 'NONE', ( 9.212216545470898400, -100.0000000000000100, 3.438986161326957000 ) ) ; +#6945 = CARTESIAN_POINT ( 'NONE', ( 34.31072254668175200, -21.42392200478856200, 17.15368355671534000 ) ) ; +#6946 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#6947 = CARTESIAN_POINT ( 'NONE', ( 7.540459162887688500, -31.14859682177248600, 26.16292288345306000 ) ) ; +#6948 = ORIENTED_EDGE ( 'NONE', *, *, #9481, .F. ) ; +#6949 = EDGE_CURVE ( 'NONE', #2854, #4476, #2474, .T. ) ; +#6950 = CARTESIAN_POINT ( 'NONE', ( 4.546902354672756300, -30.97020252523837400, 23.37075692845555300 ) ) ; +#6951 = CARTESIAN_POINT ( 'NONE', ( 35.66700031417270400, -15.80728769097530100, -20.94822827446106900 ) ) ; +#6952 = CARTESIAN_POINT ( 'NONE', ( 37.50008036490041300, -19.97016602489424700, 9.057336041640153800 ) ) ; +#6953 = CARTESIAN_POINT ( 'NONE', ( 11.76044685354049500, -10.21539878535321900, -25.03798061746959600 ) ) ; +#6954 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#6955 = CARTESIAN_POINT ( 'NONE', ( 15.60387339152796600, -12.50000000000000900, 9.252403667079454100 ) ) ; +#6956 = CARTESIAN_POINT ( 'NONE', ( 27.38031780985391400, -20.90205121277090300, -23.41187197477019700 ) ) ; +#6957 = CARTESIAN_POINT ( 'NONE', ( 35.28972426790518600, -12.20595920405245500, -22.36390528409024400 ) ) ; +#6958 = CARTESIAN_POINT ( 'NONE', ( 24.16256596758188700, -12.50000000000000200, 9.489568955249119100 ) ) ; +#6959 = CARTESIAN_POINT ( 'NONE', ( 33.28877232383170100, -31.05964335916062400, 25.65982793224482700 ) ) ; +#6960 = VERTEX_POINT ( 'NONE', #1301 ) ; +#6961 = CARTESIAN_POINT ( 'NONE', ( 11.06020946195766500, -30.79944391106071300, 27.88163699469825100 ) ) ; +#6962 = CARTESIAN_POINT ( 'NONE', ( 13.25104814925266100, -19.44297084552592000, 22.72385755298890000 ) ) ; +#6963 = CARTESIAN_POINT ( 'NONE', ( 6.128564215484471900, -12.50000000000021500, -15.72933468152750600 ) ) ; +#6964 = CARTESIAN_POINT ( 'NONE', ( 36.57274810186937200, -9.999999999999998200, -24.54387524590237400 ) ) ; +#6965 = CARTESIAN_POINT ( 'NONE', ( 33.96336271625563100, -12.50000000000002800, -15.53256071603016900 ) ) ; +#6966 = CARTESIAN_POINT ( 'NONE', ( 5.267587981451875100, -22.85657126867747000, 10.12223669067172900 ) ) ; +#6967 = CARTESIAN_POINT ( 'NONE', ( 6.763359963026559300, -18.54088238239249300, -22.82935076963506700 ) ) ; +#6968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#6969 = CARTESIAN_POINT ( 'NONE', ( 7.497477301169984000, -94.71789415301159900, 16.54779693529618700 ) ) ; +#6970 = VERTEX_POINT ( 'NONE', #5740 ) ; +#6971 = EDGE_CURVE ( 'NONE', #13608, #2269, #2342, .T. ) ; +#6972 = CARTESIAN_POINT ( 'NONE', ( 36.38570093690673000, -20.13442955551221700, 13.74322501081556100 ) ) ; +#6973 = CARTESIAN_POINT ( 'NONE', ( 23.53454995731761600, -10.00000000000000400, -29.31274364000461200 ) ) ; +#6974 = CARTESIAN_POINT ( 'NONE', ( 26.70720308668627000, -11.68860824032027800, 24.70225280738490200 ) ) ; +#6975 = CARTESIAN_POINT ( 'NONE', ( 9.228360520215739300, -30.67722847186291100, 27.24359333670574300 ) ) ; +#6976 = CARTESIAN_POINT ( 'NONE', ( 35.32071625396167000, -30.99861768601244400, 23.54054740168204100 ) ) ; +#6977 = VERTEX_POINT ( 'NONE', #13552 ) ; +#6978 = CARTESIAN_POINT ( 'NONE', ( 37.50091920023296400, -19.99632319906791300, 7.963505047754308600 ) ) ; +#6979 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -90.07596123493894400, 10.95758058754439400 ) ) ; +#6980 = CARTESIAN_POINT ( 'NONE', ( 5.811358941079226300, -30.65410270120790100, 25.29110733287321000 ) ) ; +#6981 = MANIFOLD_SOLID_BREP ( 'Fillet39', #14170 ) ; +#6982 = VERTEX_POINT ( 'NONE', #9098 ) ; +#6983 = CARTESIAN_POINT ( 'NONE', ( 3.020405135749332900, -12.03011971825164000, -20.51582182436544600 ) ) ; +#6984 = CARTESIAN_POINT ( 'NONE', ( 13.15273288870218100, -28.08123352512510000, 26.96594673378285400 ) ) ; +#6985 = CARTESIAN_POINT ( 'NONE', ( 3.458561907401557400, -30.54458585266199900, 22.34048345383861900 ) ) ; +#6986 = EDGE_CURVE ( 'NONE', #10377, #13531, #2357, .T. ) ; +#6987 = VERTEX_POINT ( 'NONE', #1354 ) ; +#6988 = CARTESIAN_POINT ( 'NONE', ( 31.24592985131281600, -30.27890261256897000, 27.04489120044821600 ) ) ; +#6989 = CARTESIAN_POINT ( 'NONE', ( 14.44735850723314000, -30.73008496449072900, 28.68737676356677100 ) ) ; +#6990 = CARTESIAN_POINT ( 'NONE', ( 7.275386421889153100, -30.32787068835240500, 26.32775854606357800 ) ) ; +#6991 = CARTESIAN_POINT ( 'NONE', ( 36.38192481920860600, -28.90571795344154900, 22.05771438100562100 ) ) ; +#6992 = CARTESIAN_POINT ( 'NONE', ( 5.922237887215129800, -22.03500000000001400, 12.49850777260496700 ) ) ; +#6993 = CARTESIAN_POINT ( 'NONE', ( 34.96448479424157100, -26.13498476956601400, 15.54672872873116200 ) ) ; +#6994 = CARTESIAN_POINT ( 'NONE', ( 17.65009325286077400, -28.77556518705050300, 29.18936127947248600 ) ) ; +#6995 = EDGE_LOOP ( 'NONE', ( #2641, #3294, #11054, #12175 ) ) ; +#6996 = CARTESIAN_POINT ( 'NONE', ( 10.24083688732646600, -30.92263236860738500, 27.58356118751883900 ) ) ; +#6997 = VECTOR ( 'NONE', #9460, 1000.000000000000000 ) ; +#6998 = CARTESIAN_POINT ( 'NONE', ( 4.019244336764160200, -30.20443298898434400, 23.85302595519615900 ) ) ; +#6999 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5325, #13115, #6455, #14256 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0002170952677951357200 ), + .UNSPECIFIED. ) ; +#7000 = CARTESIAN_POINT ( 'NONE', ( 29.14096434216482500, -7.741079707029872000, -24.60169140507961300 ) ) ; +#7001 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.04517183358918000, 16.23828164244108400 ) ) ; +#7002 = CARTESIAN_POINT ( 'NONE', ( 10.61853066551767800, -10.09467122765814500, -24.99999999999999600 ) ) ; +#7003 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.00000000000000000, -19.99999999999999600 ) ) ; +#7004 = ADVANCED_FACE ( 'NONE', ( #2317 ), #2194, .T. ) ; +#7005 = CARTESIAN_POINT ( 'NONE', ( 27.04941352502764200, -30.77347774677197000, 28.36758194924810200 ) ) ; +#7006 = ORIENTED_EDGE ( 'NONE', *, *, #11395, .F. ) ; +#7007 = AXIS2_PLACEMENT_3D ( 'NONE', #673, #8450, #1766 ) ; +#7008 = CARTESIAN_POINT ( 'NONE', ( 26.68707644535893000, -12.50000000000001800, -22.21910525650142200 ) ) ; +#7009 = CARTESIAN_POINT ( 'NONE', ( 34.07570857223490200, -10.00000000000000200, -26.24266443065548400 ) ) ; +#7010 = CARTESIAN_POINT ( 'NONE', ( 31.38458188252677400, -23.71962714219001400, 16.30509592813698900 ) ) ; +#7011 = CARTESIAN_POINT ( 'NONE', ( 33.23963209417855300, -29.99990117054026600, 25.97035586012092200 ) ) ; +#7012 = ORIENTED_EDGE ( 'NONE', *, *, #10937, .T. ) ; +#7013 = CARTESIAN_POINT ( 'NONE', ( 11.16277261511465500, -30.83480921756590100, 27.90631675266368800 ) ) ; +#7014 = CARTESIAN_POINT ( 'NONE', ( 14.73059265605453100, -19.70312070887181100, 23.02723154328102200 ) ) ; +#7015 = CARTESIAN_POINT ( 'NONE', ( 15.10831890754879200, -12.49999999999997900, -12.72297993299711100 ) ) ; +#7016 = DIRECTION ( 'NONE', ( 0.9085756232452916200, 2.081668171172167700E-015, -0.4177204051090037100 ) ) ; +#7017 = CARTESIAN_POINT ( 'NONE', ( 24.84450088035647400, -12.50000000000004800, -12.86824239864739500 ) ) ; +#7018 = FACE_OUTER_BOUND ( 'NONE', #14132, .T. ) ; +#7019 = EDGE_CURVE ( 'NONE', #3143, #13632, #9261, .T. ) ; +#7020 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3926, #4979, #6158, #13965 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.476351958820479900E-020, 0.001311701492661255900 ), + .UNSPECIFIED. ) ; +#7021 = CARTESIAN_POINT ( 'NONE', ( 22.50959247652352200, -19.90134612305841000, 23.25412553317171300 ) ) ; +#7022 = CARTESIAN_POINT ( 'NONE', ( 24.78700691894899000, -95.07596123493894400, 17.80645102013243900 ) ) ; +#7023 = CARTESIAN_POINT ( 'NONE', ( 13.05961448212145000, -95.07596123493894400, 16.49608506106100200 ) ) ; +#7024 = ORIENTED_EDGE ( 'NONE', *, *, #3155, .T. ) ; +#7025 = CARTESIAN_POINT ( 'NONE', ( 35.06495525429552600, -19.50348971060933300, 16.48637328123886900 ) ) ; +#7026 = CARTESIAN_POINT ( 'NONE', ( 31.09572391982236500, -20.35701979662870500, -24.12109547953576400 ) ) ; +#7027 = CARTESIAN_POINT ( 'NONE', ( 0.002739849957384722600, -10.00000000000000000, -20.16550224408168300 ) ) ; +#7028 = CARTESIAN_POINT ( 'NONE', ( 9.243851904840658700, -30.37478665797554100, 27.26093816917489600 ) ) ; +#7029 = CARTESIAN_POINT ( 'NONE', ( 35.70562387855513000, -29.98381399028139800, 24.19167580961147500 ) ) ; +#7030 = FACE_OUTER_BOUND ( 'NONE', #11402, .T. ) ; +#7031 = EDGE_LOOP ( 'NONE', ( #1394, #8721 ) ) ; +#7032 = AXIS2_PLACEMENT_3D ( 'NONE', #7132, #518, #8284 ) ; +#7033 = LINE ( 'NONE', #997, #9025 ) ; +#7034 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5503, #11902, #6636, #43, #7785, #1130 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 9.503055234951164200E-017, 0.0002552483974944903600, 0.0005104967949888857400 ), + .UNSPECIFIED. ) ; +#7035 = CARTESIAN_POINT ( 'NONE', ( 4.949019638235214700, -20.52808596206482500, 16.29877361499734100 ) ) ; +#7036 = CARTESIAN_POINT ( 'NONE', ( 5.927586790138718700, -29.69313938833974800, 25.31298169060405800 ) ) ; +#7037 = CARTESIAN_POINT ( 'NONE', ( 30.11849830837051200, -23.87650910865852400, 17.42402259121493600 ) ) ; +#7038 = CARTESIAN_POINT ( 'NONE', ( 4.874925642718720200, -10.00000000000087400, -22.81997633900332900 ) ) ; +#7039 = CARTESIAN_POINT ( 'NONE', ( 16.89690202318665900, -97.51619941817645600, 22.06232990039169200 ) ) ; +#7040 = CARTESIAN_POINT ( 'NONE', ( 4.737854640531646000, -10.00000000000000400, -23.75180367221038600 ) ) ; +#7041 = EDGE_CURVE ( 'NONE', #2364, #4028, #2528, .T. ) ; +#7042 = CARTESIAN_POINT ( 'NONE', ( 3.186396100766396800, -29.37334394857103700, 22.54419031749379300 ) ) ; +#7043 = FACE_OUTER_BOUND ( 'NONE', #933, .T. ) ; +#7044 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .F. ) ; +#7045 = CARTESIAN_POINT ( 'NONE', ( 31.26767175996979400, -30.73219571437126900, 27.01341836153250900 ) ) ; +#7046 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#7047 = CARTESIAN_POINT ( 'NONE', ( 7.540014240441853300, -31.14682933481992700, 26.16400340931503300 ) ) ; +#7048 = CARTESIAN_POINT ( 'NONE', ( 37.44345861925786100, -29.82089491607692000, 21.88505763781119700 ) ) ; +#7049 = CARTESIAN_POINT ( 'NONE', ( 37.47827195408339700, -27.76489309050236500, 11.31702220403601600 ) ) ; +#7050 = CARTESIAN_POINT ( 'NONE', ( 17.68719383516764100, -30.65917406624146600, 28.85723021296910300 ) ) ; +#7051 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7052 = ORIENTED_EDGE ( 'NONE', *, *, #2585, .F. ) ; +#7053 = CARTESIAN_POINT ( 'NONE', ( 4.525867205245487100, -29.15167087699495200, 23.70569153737975300 ) ) ; +#7054 = CARTESIAN_POINT ( 'NONE', ( 5.000010399948774200, -95.07596123481022200, 12.92966076384957200 ) ) ; +#7055 = CARTESIAN_POINT ( 'NONE', ( 10.08686373817245900, -10.95015321110679800, -25.00000000000207100 ) ) ; +#7056 = CYLINDRICAL_SURFACE ( 'NONE', #13071, 2.499999999999998700 ) ; +#7057 = CARTESIAN_POINT ( 'NONE', ( 26.03590069959416200, -15.12364152673862500, -25.90343624064229300 ) ) ; +#7058 = CARTESIAN_POINT ( 'NONE', ( 9.255005935952427300, -30.90254050788312400, 27.25515540006694000 ) ) ; +#7059 = ORIENTED_EDGE ( 'NONE', *, *, #14149, .F. ) ; +#7060 = CARTESIAN_POINT ( 'NONE', ( 23.31753184020945800, -12.50000000000001200, -14.40837590800808100 ) ) ; +#7061 = CARTESIAN_POINT ( 'NONE', ( 33.32654847754586300, -12.50000000000208400, 15.88435142536577300 ) ) ; +#7062 = EDGE_CURVE ( 'NONE', #4810, #4395, #4051, .T. ) ; +#7063 = CARTESIAN_POINT ( 'NONE', ( 33.27605865787621300, -30.76786492994908400, 25.89028674239951800 ) ) ; +#7064 = EDGE_LOOP ( 'NONE', ( #11125, #13174, #7089, #6729 ) ) ; +#7065 = CARTESIAN_POINT ( 'NONE', ( 11.16313478052527100, -30.81915217582460500, 27.90918302419701600 ) ) ; +#7066 = CARTESIAN_POINT ( 'NONE', ( 16.23034817298857700, -19.95145337176816000, 23.19062940254255200 ) ) ; +#7067 = CARTESIAN_POINT ( 'NONE', ( 5.268318655102499200, -22.14293834481940200, -14.53538334956566700 ) ) ; +#7068 = CARTESIAN_POINT ( 'NONE', ( 34.99873893597595800, -22.47171745629600500, -12.17729898828542000 ) ) ; +#7069 = CARTESIAN_POINT ( 'NONE', ( 33.68150273174053700, -21.72507388145951500, -17.53083455579980000 ) ) ; +#7070 = CIRCLE ( 'NONE', #13027, 2.500000000000000000 ) ; +#7071 = CARTESIAN_POINT ( 'NONE', ( 16.26791872765002700, -22.06020996544828000, -27.08509468932003000 ) ) ; +#7072 = CARTESIAN_POINT ( 'NONE', ( 30.18529199993919200, -94.71799171676630600, 17.48965911176836800 ) ) ; +#7073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7074 = CARTESIAN_POINT ( 'NONE', ( 34.25356397671910700, -19.03812902296133600, 17.79965959376260900 ) ) ; +#7075 = CARTESIAN_POINT ( 'NONE', ( 12.58359595370159000, -11.87724389807648300, 24.55522993379390700 ) ) ; +#7076 = CARTESIAN_POINT ( 'NONE', ( 9.328828999950047800, -30.75935447402075300, 27.27018407474597700 ) ) ; +#7077 = CARTESIAN_POINT ( 'NONE', ( 35.30517738019082000, -30.96210615417438600, 23.67775398667271600 ) ) ; +#7078 = VERTEX_POINT ( 'NONE', #1400 ) ; +#7079 = CARTESIAN_POINT ( 'NONE', ( 17.51853928026184100, -28.77816371652371400, 29.18890308861619300 ) ) ; +#7080 = ADVANCED_FACE ( 'NONE', ( #2139 ), #2006, .T. ) ; +#7081 = CARTESIAN_POINT ( 'NONE', ( 2.500551666394682700, -21.21984131744006100, 7.920870232500869100 ) ) ; +#7082 = CARTESIAN_POINT ( 'NONE', ( 0.4734153224019237400, -11.89366128960763500, 8.005331014629295100 ) ) ; +#7083 = CARTESIAN_POINT ( 'NONE', ( 6.181241076745950000, -31.00524187057165900, 25.28994297718752200 ) ) ; +#7084 = CARTESIAN_POINT ( 'NONE', ( 34.83934241836162500, -22.78256767847531300, 9.591637980873695600 ) ) ; +#7085 = CARTESIAN_POINT ( 'NONE', ( 5.924291427754861100, -10.00000000000000000, -26.24266443068254500 ) ) ; +#7086 = CARTESIAN_POINT ( 'NONE', ( 3.756867239339289500, -97.42181713028699600, 18.37434326604852300 ) ) ; +#7087 = CARTESIAN_POINT ( 'NONE', ( 13.55949315053756800, -20.41993413119555000, -26.33957947307412800 ) ) ; +#7088 = CARTESIAN_POINT ( 'NONE', ( 3.927609697927439300, -30.78218039651684300, 22.49190894363446000 ) ) ; +#7089 = ORIENTED_EDGE ( 'NONE', *, *, #4993, .T. ) ; +#7090 = CARTESIAN_POINT ( 'NONE', ( 31.04902506662312000, -30.29941374016769700, 27.13262532113073500 ) ) ; +#7091 = CARTESIAN_POINT ( 'NONE', ( 6.401246254606610900, -18.54969718727587100, -22.46582799829084100 ) ) ; +#7092 = CARTESIAN_POINT ( 'NONE', ( 7.456105669737979700, -30.53188306872870300, 26.41746345399783600 ) ) ; +#7093 = CARTESIAN_POINT ( 'NONE', ( 36.38011203993343700, -30.62110848141928100, 21.75562120727261100 ) ) ; +#7094 = AXIS2_PLACEMENT_3D ( 'NONE', #11688, #10570, #1637 ) ; +#7095 = CARTESIAN_POINT ( 'NONE', ( 22.31280744310812000, -31.29913968154962600, 28.74438700826458500 ) ) ; +#7096 = CARTESIAN_POINT ( 'NONE', ( 4.300233742561776000, -30.54723856800937700, 23.92228383908106100 ) ) ; +#7097 = CARTESIAN_POINT ( 'NONE', ( 31.76720441824302600, -8.114834368907887500, 25.00000000000001100 ) ) ; +#7098 = CARTESIAN_POINT ( 'NONE', ( 9.898025113376750300, -12.07229092347410700, -25.07103632394232700 ) ) ; +#7099 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #319, #8074, #1410, #9206 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 6.239800503494006300, 6.248376981218863000 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9999938703452127000, 0.9999938703452127000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#7100 = LOCAL_TIME ( 15, 9, 47.00000000000000000, #7283 ) ; +#7101 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998900, -12.50000000000000400, -11.97268808056939400 ) ) ; +#7102 = CARTESIAN_POINT ( 'NONE', ( 28.92983642567693900, -20.31968793891471100, -25.58884483563672400 ) ) ; +#7103 = CARTESIAN_POINT ( 'NONE', ( 6.033952684832383900, -28.48512868753994100, 23.83350120348792700 ) ) ; +#7104 = CARTESIAN_POINT ( 'NONE', ( 25.98905168202054100, -20.83293134803990300, -23.90422001618599500 ) ) ; +#7105 = EDGE_CURVE ( 'NONE', #12598, #2597, #2014, .T. ) ; +#7106 = CARTESIAN_POINT ( 'NONE', ( 30.82650891383461200, -19.12574047898368000, 20.90595155039173000 ) ) ; +#7107 = ORIENTED_EDGE ( 'NONE', *, *, #3415, .T. ) ; +#7108 = CARTESIAN_POINT ( 'NONE', ( 24.63263491268705300, -12.49999999999999300, 8.911801270991270800 ) ) ; +#7109 = CARTESIAN_POINT ( 'NONE', ( 32.99628017500199900, -29.79072243666706400, 26.03291392578444900 ) ) ; +#7110 = CARTESIAN_POINT ( 'NONE', ( 4.150578382376522800, -30.51463762188669500, 13.24633071365445300 ) ) ; +#7111 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#7112 = CARTESIAN_POINT ( 'NONE', ( 5.126804482762948600, -12.49999999999970500, -12.75479268486789800 ) ) ; +#7113 = CARTESIAN_POINT ( 'NONE', ( 33.35601697217219900, -21.63294693341706000, -18.18521398251046500 ) ) ; +#7114 = CARTESIAN_POINT ( 'NONE', ( 32.37992939471206500, -12.50000000000079600, -18.13048030348820600 ) ) ; +#7115 = AXIS2_PLACEMENT_3D ( 'NONE', #12841, #6125, #13933 ) ; +#7116 = CYLINDRICAL_SURFACE ( 'NONE', #3407, 3.189999999999994200 ) ; +#7117 = CARTESIAN_POINT ( 'NONE', ( 22.44828662478935400, -27.98904526346343100, 27.51060708928500300 ) ) ; +#7118 = CARTESIAN_POINT ( 'NONE', ( 33.18074599946653800, -95.07596123493894400, 14.12565726167929700 ) ) ; +#7119 = CARTESIAN_POINT ( 'NONE', ( 30.14812971591781800, -30.52484004993639400, 27.50175917188059000 ) ) ; +#7120 = CARTESIAN_POINT ( 'NONE', ( 5.079484036836326800, -99.99999999999998600, -27.29038152329702900 ) ) ; +#7121 = CARTESIAN_POINT ( 'NONE', ( 32.36363241784287900, -20.26338021598306600, 19.47790602464339600 ) ) ; +#7122 = ORIENTED_EDGE ( 'NONE', *, *, #5963, .F. ) ; +#7123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7124 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7125 = CARTESIAN_POINT ( 'NONE', ( 9.340376627595441400, -30.42309161635926900, 27.30219532100854700 ) ) ; +#7126 = CARTESIAN_POINT ( 'NONE', ( 35.44407173870952500, -29.60440413267426900, 24.22357352038539300 ) ) ; +#7127 = CARTESIAN_POINT ( 'NONE', ( 3.550532966968379200, -30.55079519729964900, 21.46087037243996700 ) ) ; +#7128 = EDGE_CURVE ( 'NONE', #7078, #3367, #2032, .T. ) ; +#7129 = CARTESIAN_POINT ( 'NONE', ( 15.36080376075744200, -17.73289449204344900, 23.63648206207653500 ) ) ; +#7130 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -90.21328256874078000, -4.026587092780885300 ) ) ; +#7131 = CARTESIAN_POINT ( 'NONE', ( 6.082949014302558400, -30.12964193518726900, 25.57753126321183900 ) ) ; +#7132 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 12.00000000000000000, 20.00000000000000400 ) ) ; +#7133 = CARTESIAN_POINT ( 'NONE', ( 9.555915767041252500, -12.49999999999989300, 19.22551176685108500 ) ) ; +#7134 = CARTESIAN_POINT ( 'NONE', ( 27.67335839538865700, -11.65527856071231700, -25.29187027084183400 ) ) ; +#7135 = CARTESIAN_POINT ( 'NONE', ( 17.50735423513289000, -27.96523496585093200, 27.45710953202296500 ) ) ; +#7136 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999988500, -19.99999999999981900, -11.53187062879840700 ) ) ; +#7137 = ORIENTED_EDGE ( 'NONE', *, *, #11016, .T. ) ; +#7138 = CARTESIAN_POINT ( 'NONE', ( 3.091851801050364800, -29.78526150079106900, 22.70986486290567500 ) ) ; +#7139 = CARTESIAN_POINT ( 'NONE', ( 0.4733527859614873900, -11.89378497092664600, 7.921200415134260100 ) ) ; +#7140 = CARTESIAN_POINT ( 'NONE', ( 31.07004131293532000, -30.65053354004275800, 27.11865823309084400 ) ) ; +#7141 = CARTESIAN_POINT ( 'NONE', ( 2.593484469906669300, -18.72239829057709300, -15.26716015242930300 ) ) ; +#7142 = CARTESIAN_POINT ( 'NONE', ( 7.540231723207514700, -29.91792460583990400, 26.38032382608945200 ) ) ; +#7143 = CARTESIAN_POINT ( 'NONE', ( 37.27098319320551000, -29.51032277842659100, 22.09444038356512500 ) ) ; +#7144 = EDGE_LOOP ( 'NONE', ( #12499, #2121, #4850, #1166, #4089, #9927 ) ) ; +#7145 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7146 = EDGE_CURVE ( 'NONE', #10215, #11281, #2368, .T. ) ; +#7147 = CARTESIAN_POINT ( 'NONE', ( 4.433264212047668600, -29.48189322991553100, 24.00414798877307000 ) ) ; +#7148 = CARTESIAN_POINT ( 'NONE', ( 39.14624402049086200, -11.41269804714463000, -15.77208063297350400 ) ) ; +#7149 = ORIENTED_EDGE ( 'NONE', *, *, #7722, .T. ) ; +#7150 = CARTESIAN_POINT ( 'NONE', ( 17.45405457413378900, -33.17879905958958600, 28.41295234537445700 ) ) ; +#7151 = CARTESIAN_POINT ( 'NONE', ( 24.86408699288391200, -20.69852235746898800, -26.88643814533447300 ) ) ; +#7152 = ADVANCED_FACE ( 'NONE', ( #1671 ), #1488, .F. ) ; +#7153 = CARTESIAN_POINT ( 'NONE', ( 24.90813519239961600, -12.50000000000039600, -22.70807607733437900 ) ) ; +#7154 = CARTESIAN_POINT ( 'NONE', ( 37.41552301124571000, -18.88976581895506300, 11.31284947348761300 ) ) ; +#7155 = ORIENTED_EDGE ( 'NONE', *, *, #13171, .F. ) ; +#7156 = CARTESIAN_POINT ( 'NONE', ( 33.93728366609756400, -23.19876905566030700, 12.57925676557706000 ) ) ; +#7157 = CARTESIAN_POINT ( 'NONE', ( 33.11590062904510700, -30.56004743382864300, 26.08347835654963700 ) ) ; +#7158 = CARTESIAN_POINT ( 'NONE', ( 2.524010953719973700, -28.03812380488089700, 11.36115117535159800 ) ) ; +#7159 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000300, 27.93780948130460100 ) ) ; +#7160 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -20.76351822333077700, -24.39789867012037700 ) ) ; +#7161 = ORIENTED_EDGE ( 'NONE', *, *, #7471, .F. ) ; +#7162 = DIRECTION ( 'NONE', ( -1.000000000000000000, 4.336808689942017100E-017, 7.646963822076800200E-018 ) ) ; +#7163 = CARTESIAN_POINT ( 'NONE', ( 32.56068175410190700, -29.88890172398760500, 26.31659898838344000 ) ) ; +#7164 = CARTESIAN_POINT ( 'NONE', ( 9.818323438264403800, -99.99999999999998600, -35.71643108392893900 ) ) ; +#7165 = EDGE_CURVE ( 'NONE', #2269, #11717, #1529, .T. ) ; +#7166 = CARTESIAN_POINT ( 'NONE', ( 30.37524766253813300, -19.79734306668227400, 21.01437823179685400 ) ) ; +#7167 = ORIENTED_EDGE ( 'NONE', *, *, #3683, .T. ) ; +#7168 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#7169 = CARTESIAN_POINT ( 'NONE', ( 37.48988985941080200, -21.18388377105249600, 8.366363573336588600 ) ) ; +#7170 = CARTESIAN_POINT ( 'NONE', ( 9.633062861229596800, -30.87147548030640800, 27.36631122472573500 ) ) ; +#7171 = CARTESIAN_POINT ( 'NONE', ( 35.44408037209701900, -30.70462660942086700, 24.02958291181200700 ) ) ; +#7172 = CARTESIAN_POINT ( 'NONE', ( 30.73703696042980500, -94.73589744036247900, 17.26429150633666500 ) ) ; +#7173 = VERTEX_POINT ( 'NONE', #5936 ) ; +#7174 = CARTESIAN_POINT ( 'NONE', ( 2.757870067905592700, -25.10678370712441400, 10.01126694314171300 ) ) ; +#7175 = CARTESIAN_POINT ( 'NONE', ( 32.85209913881712400, -9.632503373171216400, 25.00000000000000000 ) ) ; +#7176 = CARTESIAN_POINT ( 'NONE', ( 6.331557300769096800, -31.16392483964347400, 25.23928636523219600 ) ) ; +#7177 = CARTESIAN_POINT ( 'NONE', ( 41.95203297454234100, -9.999999999999994700, 7.923893696450003100 ) ) ; +#7178 = CARTESIAN_POINT ( 'NONE', ( 16.18056162319803400, -12.50000000000005500, 9.753500911092611900 ) ) ; +#7179 = DIRECTION ( 'NONE', ( 0.4544389162859509000, -0.8772449844739238500, -0.1546819594529227100 ) ) ; +#7180 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -21.23105625617651900, -11.53187062879839100 ) ) ; +#7181 = ORIENTED_EDGE ( 'NONE', *, *, #11111, .T. ) ; +#7182 = CIRCLE ( 'NONE', #11536, 2.500000000000000900 ) ; +#7183 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11141, #6702, #2280 ), + ( #10106, #3388, #11233 ), + ( #4504, #12339, #5616 ), + ( #13442, #6748, #153 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.9786830164449115100, 0.9828601067998058400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9925075566829026900, 1.000000000000000000), + ( 1.000000000000000000, 0.9925381826870186600, 1.000000000000000000), + ( 1.000000000000000000, 0.9925656350905162100, 1.000000000000000000), + ( 1.000000000000000000, 0.9925899840658825000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#7184 = CARTESIAN_POINT ( 'NONE', ( -1.951598721123998700, -9.999999999999994700, 8.121578618375352200 ) ) ; +#7185 = EDGE_CURVE ( 'NONE', #11259, #10401, #13365, .T. ) ; +#7186 = CARTESIAN_POINT ( 'NONE', ( 31.05005764071840300, -31.03689486635294900, 27.00494536480320900 ) ) ; +#7187 = CARTESIAN_POINT ( 'NONE', ( 7.848785307727546900, -30.70583347337473900, 26.58468661143964700 ) ) ; +#7188 = CARTESIAN_POINT ( 'NONE', ( 36.51419733800193500, -30.57886736570995000, 21.92236646407505800 ) ) ; +#7189 = ORIENTED_EDGE ( 'NONE', *, *, #11481, .T. ) ; +#7190 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 10.00000000000000000, -24.99999999999999600 ) ) ; +#7191 = CARTESIAN_POINT ( 'NONE', ( 4.632047385262859900, -30.89870811960355500, 23.74186699549974500 ) ) ; +#7192 = CARTESIAN_POINT ( 'NONE', ( 40.00000001105099300, -10.00000000000000400, -11.53324907983974200 ) ) ; +#7193 = CARTESIAN_POINT ( 'NONE', ( 23.47411650217507900, -19.00051484900046700, 23.41296639185410600 ) ) ; +#7194 = VERTEX_POINT ( 'NONE', #8317 ) ; +#7195 = FACE_OUTER_BOUND ( 'NONE', #1864, .T. ) ; +#7196 = CARTESIAN_POINT ( 'NONE', ( 29.55506175464668700, -30.73327892092395400, 27.69509754836699900 ) ) ; +#7197 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#7198 = CARTESIAN_POINT ( 'NONE', ( 22.89512809165899300, -12.49999999999999600, -14.51756329791799000 ) ) ; +#7199 = CARTESIAN_POINT ( 'NONE', ( 37.32234928795443100, -28.50159185432167800, 16.80769383955899300 ) ) ; +#7200 = CARTESIAN_POINT ( 'NONE', ( 34.70697618708045000, -12.50000000000000200, 12.57736310568014000 ) ) ; +#7201 = CARTESIAN_POINT ( 'NONE', ( 32.99032270852428900, -31.16631481071329900, 25.78109698443233800 ) ) ; +#7202 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998700, -99.99999999999998600, -25.63802908547508300 ) ) ; +#7203 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#7204 = CARTESIAN_POINT ( 'NONE', ( 34.48807199790269400, -21.98066971760600200, -21.04972174467489400 ) ) ; +#7205 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -96.23084026935336500, 5.350798983771991100 ) ) ; +#7206 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999992500, -12.49999999999999800, -22.94081745177113900 ) ) ; +#7207 = FACE_OUTER_BOUND ( 'NONE', #11892, .T. ) ; +#7208 = ORIENTED_EDGE ( 'NONE', *, *, #13382, .F. ) ; +#7209 = EDGE_CURVE ( 'NONE', #3054, #6075, #1514, .T. ) ; +#7210 = CIRCLE ( 'NONE', #2386, 3.189999999999995100 ) ; +#7211 = CARTESIAN_POINT ( 'NONE', ( 34.73612234558989100, -29.30441598897770200, 24.53341542266488100 ) ) ; +#7212 = CARTESIAN_POINT ( 'NONE', ( 37.87392192486273500, -30.00608720435155200, 21.55730817466628600 ) ) ; +#7213 = CARTESIAN_POINT ( 'NONE', ( 29.08108512230751000, -19.45130565443525200, 21.81586221837752100 ) ) ; +#7214 = ORIENTED_EDGE ( 'NONE', *, *, #4418, .F. ) ; +#7215 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.57596123493894400, 0.0000000000000000000 ) ) ; +#7216 = CARTESIAN_POINT ( 'NONE', ( 31.80432199005808200, -20.22545072011272500, 19.92086457362517700 ) ) ; +#7217 = CARTESIAN_POINT ( 'NONE', ( 9.633060380780895200, -30.58887098860604000, 27.41614179941597500 ) ) ; +#7218 = CARTESIAN_POINT ( 'NONE', ( 35.19977932573213800, -29.26828456215691800, 24.10439841013618100 ) ) ; +#7219 = AXIS2_PLACEMENT_3D ( 'NONE', #3361, #7959, #1292 ) ; +#7220 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.26512727427382300, 8.543711005773959100 ) ) ; +#7221 = CARTESIAN_POINT ( 'NONE', ( 27.37835410373944400, -93.16611561823627600, 22.40314361311407500 ) ) ; +#7222 = ADVANCED_FACE ( 'NONE', ( #1472 ), #1191, .T. ) ; +#7223 = VERTEX_POINT ( 'NONE', #6079 ) ; +#7224 = CARTESIAN_POINT ( 'NONE', ( 27.38462353206864100, -11.34173030189591300, 24.76341674694076600 ) ) ; +#7225 = CARTESIAN_POINT ( 'NONE', ( 8.522051564659594900, -20.55242451424923900, 20.11887618646065000 ) ) ; +#7226 = CARTESIAN_POINT ( 'NONE', ( 29.46338918272309800, -10.93847866935669600, 24.29410937100118400 ) ) ; +#7227 = CARTESIAN_POINT ( 'NONE', ( 6.149543840083017800, -30.38347873981417300, 25.62905498780330800 ) ) ; +#7228 = CARTESIAN_POINT ( 'NONE', ( 39.52632106966797200, -11.89351845882299200, 8.105062653214911700 ) ) ; +#7229 = CARTESIAN_POINT ( 'NONE', ( 12.61968219014608600, -24.09794878722919300, 19.00369745705873500 ) ) ; +#7230 = CARTESIAN_POINT ( 'NONE', ( 12.26279914503789900, -10.35371534656360600, 24.93763044091020100 ) ) ; +#7231 = ORIENTED_EDGE ( 'NONE', *, *, #6929, .T. ) ; +#7232 = EDGE_CURVE ( 'NONE', #6192, #5055, #1288, .T. ) ; +#7233 = CARTESIAN_POINT ( 'NONE', ( 0.01687450710640368500, -10.00000000000022600, 8.820885690750902300 ) ) ; +#7234 = CARTESIAN_POINT ( 'NONE', ( 30.96760925917638100, -30.54414739569721200, 27.17386627748533800 ) ) ; +#7235 = CARTESIAN_POINT ( 'NONE', ( 10.39455389479632100, -28.69763028592240400, 27.91132602683760700 ) ) ; +#7236 = CARTESIAN_POINT ( 'NONE', ( 7.889263144549469900, -30.11326228025252400, 26.61289696790510800 ) ) ; +#7237 = CARTESIAN_POINT ( 'NONE', ( 36.70337021303576800, -29.13157159397213300, 22.27911548049828400 ) ) ; +#7238 = CIRCLE ( 'NONE', #7329, 2.500000000000000900 ) ; +#7239 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, 15.71686712626636900 ) ) ; +#7240 = CARTESIAN_POINT ( 'NONE', ( 4.305284800498288400, -29.94046933538050600, 24.18945813162198600 ) ) ; +#7241 = CARTESIAN_POINT ( 'NONE', ( 13.91773889442915300, -39.22755427999035800, 19.41490025252098000 ) ) ; +#7242 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, -19.99999999999999600 ) ) ; +#7243 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7244 = ORIENTED_EDGE ( 'NONE', *, *, #13597, .T. ) ; +#7245 = CARTESIAN_POINT ( 'NONE', ( 34.21851553603306000, -22.03500000000001400, 12.09674592387638500 ) ) ; +#7246 = CARTESIAN_POINT ( 'NONE', ( 29.55525789091287700, -30.86061283264392700, 27.67140411248624000 ) ) ; +#7247 = CARTESIAN_POINT ( 'NONE', ( 33.91270741566342700, -97.40649683660852500, 19.60336190242679800 ) ) ; +#7248 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7249 = CARTESIAN_POINT ( 'NONE', ( 22.50286862003092700, -28.77860031817857200, 29.18882610396465800 ) ) ; +#7250 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -20.76351822333076700, -24.39789867012037700 ) ) ; +#7251 = CARTESIAN_POINT ( 'NONE', ( 24.84346530599566800, -12.49999999999995600, 8.462723436544029800 ) ) ; +#7252 = EDGE_CURVE ( 'NONE', #8131, #9017, #1297, .T. ) ; +#7253 = CARTESIAN_POINT ( 'NONE', ( 33.01839268892737800, -30.39675651410981400, 26.16394351360114700 ) ) ; +#7254 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -7.395277334996141100, 10.22788370481686300 ) ) ; +#7255 = CARTESIAN_POINT ( 'NONE', ( -1.084202172485494800E-016, -2.500000000000016400, 25.00105000000004200 ) ) ; +#7256 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7257 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000006400, -12.50000000000000200, -14.54982113999828100 ) ) ; +#7258 = VERTEX_POINT ( 'NONE', #8361 ) ; +#7259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9998264493030790700, -0.01862984900629863900 ) ) ; +#7260 = CARTESIAN_POINT ( 'NONE', ( 35.68217008713495600, -29.07543967700198800, 23.38011797687829600 ) ) ; +#7261 = CARTESIAN_POINT ( 'NONE', ( 15.09620495674429100, -99.99999999999997200, 21.55134316606148900 ) ) ; +#7262 = CARTESIAN_POINT ( 'NONE', ( 27.72441941979483100, -19.16088344075028600, 22.48242520680168600 ) ) ; +#7263 = CARTESIAN_POINT ( 'NONE', ( 26.68714977647125200, -94.74473939818700800, 18.43666970265463700 ) ) ; +#7264 = CARTESIAN_POINT ( 'NONE', ( 26.37675003751881800, -16.20215066429890500, -15.93934038167734500 ) ) ; +#7265 = CARTESIAN_POINT ( 'NONE', ( 9.837476096565041000, -30.94612908055800900, 27.42424231328708500 ) ) ; +#7266 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2867, #7350, #1819, #9628, #2921, #10763, #4029, #11872, #5145, #12982, #6270, #14084, #7413, #773, #8554, #1875, #9685, #2974, #10819, #4090, #11924, #5198, #13040, #6328, #14138, #7468, #830, #8613, #1923, #9739, #3028, #10875, #4139, #11977, #5248, #13089, #6383, #14188, #7517, #877, #8663, #1972, #9786, #3082, #10927, #4190, #12025, #5300, #13140, #6430, #14234, #7567, #920, #8709, #2019, #9833, #3126, #10977, #4239, #12073, #5347, #13187, #6477, #14276, #7615, #964, #8752, #2062, #9881, #3171, #11015, #4290, #12117, #5388, #13228, #6520, #14320, #7656, #1011, #8800 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 1, 1, 1, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 1, 1, 1, 2, 2, 2, 1, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.03125000000001005400, 0.04687500000001453700, 0.05468750000001678500, 0.05859375000001754800, 0.06054687500001765900, 0.06152343750001780500, 0.06250000000001794400, 0.09375000000000298400, 0.1093749999999954200, 0.1171874999999920900, 0.1210937499999908000, 0.1230468749999909100, 0.1249999999999910100, 0.1875000000000179600, 0.2187500000000320600, 0.2343750000000390800, 0.2421875000000420800, 0.2460937500000430500, 0.2480468750000434900, 0.2500000000000439600, 0.3125000000000519000, 0.3437500000000552300, 0.3593750000000569500, 0.3671875000000568400, 0.3710937500000567900, 0.3730468750000570700, 0.3740234375000566200, 0.3750000000000561200, 0.4375000000000994800, 0.4687500000001211300, 0.5000000000001427700, 0.5625000000001847400, 0.5937500000002069500, 0.6093750000002186000, 0.6171875000002234900, 0.6210937500002258200, 0.6230468750002260400, 0.6250000000002261500, 0.6875000000001899600, 0.7187500000001717500, 0.7343750000001625400, 0.7421875000001577600, 0.7460937500001553200, 0.7500000000001528800, 0.8125000000001160200, 0.8437500000000977000, 0.8593750000000889300, 0.8671875000000843800, 0.8750000000000798300, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#7267 = CARTESIAN_POINT ( 'NONE', ( 35.58692967028060400, -30.35701777026203600, 24.25479196392992200 ) ) ; +#7268 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999742800, -94.90629810833063100, 6.281968897874172300 ) ) ; +#7269 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -97.51638471114854700, 22.06850012136331400 ) ) ; +#7270 = EDGE_CURVE ( 'NONE', #10454, #5132, #1179, .T. ) ; +#7271 = CARTESIAN_POINT ( 'NONE', ( 14.64461640343198000, -19.98018851299295000, 22.96546658741182900 ) ) ; +#7272 = CARTESIAN_POINT ( 'NONE', ( 5.000000007721785900, -95.07596123493894400, 12.92967538968970900 ) ) ; +#7273 = CARTESIAN_POINT ( 'NONE', ( 6.332015990709264100, -29.58535060885262500, 25.51699768007283000 ) ) ; +#7274 = CARTESIAN_POINT ( 'NONE', ( 39.98312530764945200, -9.999999999998173900, 8.820890215729193100 ) ) ; +#7275 = CARTESIAN_POINT ( 'NONE', ( 12.06601855932039200, -12.50000000000000700, 20.82102387465962300 ) ) ; +#7276 = CARTESIAN_POINT ( 'NONE', ( 0.7447729922773481700, -11.88946760037591800, 11.10219037529880200 ) ) ; +#7277 = CARTESIAN_POINT ( 'NONE', ( 30.96260673394802900, -30.91502433980263500, 27.09699030997467200 ) ) ; +#7278 = CARTESIAN_POINT ( 'NONE', ( 9.834632815411488600, -27.15670248140985200, 19.87856920567229200 ) ) ; +#7279 = CARTESIAN_POINT ( 'NONE', ( 8.064045769552436100, -30.94147052714706800, 26.60387608299937400 ) ) ; +#7280 = CARTESIAN_POINT ( 'NONE', ( 36.99913432533199400, -30.29254315032539300, 22.06724523682290600 ) ) ; +#7281 = FACE_OUTER_BOUND ( 'NONE', #8091, .T. ) ; +#7282 = AXIS2_PLACEMENT_3D ( 'NONE', #3551, #11391, #4660 ) ; +#7283 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#7284 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -12.50000000000000400, -14.54982113999827900 ) ) ; +#7285 = VERTEX_POINT ( 'NONE', #11733 ) ; +#7286 = CARTESIAN_POINT ( 'NONE', ( 4.832080573028178200, -31.02639909211765000, 23.72968610155220000 ) ) ; +#7287 = CARTESIAN_POINT ( 'NONE', ( 12.57169216872066800, -31.83008028243129300, 20.32333392403914000 ) ) ; +#7288 = CARTESIAN_POINT ( 'NONE', ( 36.49133357294417800, -95.07596123493894400, 0.4163258229743335700 ) ) ; +#7289 = CARTESIAN_POINT ( 'NONE', ( 31.66939331951960300, -100.0000000000000100, 2.561698833008323000 ) ) ; +#7290 = CARTESIAN_POINT ( 'NONE', ( 29.24822623502717200, -30.73636478199152900, 27.79500602319072300 ) ) ; +#7291 = CARTESIAN_POINT ( 'NONE', ( 28.35894844889568500, -100.0000000000000700, 20.99780054130288700 ) ) ; +#7292 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -39.52045731841471400, 19.79474689191102500 ) ) ; +#7293 = ADVANCED_FACE ( 'NONE', ( #1636 ), #8186, .F. ) ; +#7294 = CARTESIAN_POINT ( 'NONE', ( 26.83315423177980100, -11.37078849373982000, 24.75829300370896400 ) ) ; +#7295 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7296 = EDGE_CURVE ( 'NONE', #3707, #1799, #797, .T. ) ; +#7297 = CYLINDRICAL_SURFACE ( 'NONE', #2555, 2.499999999999999600 ) ; +#7298 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -20.28809933266904900, -11.58267031427208100 ) ) ; +#7299 = CARTESIAN_POINT ( 'NONE', ( 34.45489643683590200, -23.00596570861291900, 11.19424732005421500 ) ) ; +#7300 = CARTESIAN_POINT ( 'NONE', ( 32.91795123201264800, -31.11669578310215200, 25.87833058074189200 ) ) ; +#7301 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7302 = VERTEX_POINT ( 'NONE', #544 ) ; +#7303 = CARTESIAN_POINT ( 'NONE', ( 28.92176766671955700, -10.31232462282207500, -25.03306748086994600 ) ) ; +#7304 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524033600, 6.754920151478382100 ) ) ; +#7305 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999591400, -97.04517183358908000, 16.23828164244108800 ) ) ; +#7306 = CARTESIAN_POINT ( 'NONE', ( 15.39913990572320700, -20.78817894450584400, -24.22299369858301400 ) ) ; +#7307 = AXIS2_PLACEMENT_3D ( 'NONE', #11065, #4343, #12177 ) ; +#7308 = CARTESIAN_POINT ( 'NONE', ( 15.40333264743814300, -18.16439105243539100, 23.52976607555539000 ) ) ; +#7309 = CARTESIAN_POINT ( 'NONE', ( 36.20578065549229100, -28.95348135597116400, 22.48990344259554800 ) ) ; +#7310 = CARTESIAN_POINT ( 'NONE', ( 4.273556745215160800, -100.0000000000000000, 18.22042776059914400 ) ) ; +#7311 = CARTESIAN_POINT ( 'NONE', ( 25.75580267785033700, -19.97633833953344900, 22.88654624779016400 ) ) ; +#7312 = CARTESIAN_POINT ( 'NONE', ( 14.16144000006087500, -24.17308257811077600, 19.53885197235505100 ) ) ; +#7313 = CARTESIAN_POINT ( 'NONE', ( 2.493048797541906200, -10.00000000000008700, 20.46550316962110100 ) ) ; +#7314 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999990200, -21.23289229545666500, -11.65633660811781000 ) ) ; +#7315 = CARTESIAN_POINT ( 'NONE', ( 9.832991945865828100, -30.70945463075037900, 27.47977999285564400 ) ) ; +#7316 = CARTESIAN_POINT ( 'NONE', ( 35.01222908415817900, -29.23573435304916000, 24.23295969994408600 ) ) ; +#7317 = CARTESIAN_POINT ( 'NONE', ( 15.72560907083584200, -12.50000000000001200, 9.379790223900872800 ) ) ; +#7318 = VERTEX_POINT ( 'NONE', #6036 ) ; +#7319 = CARTESIAN_POINT ( 'NONE', ( 36.87110533756071400, -92.95357113377321000, 2.611388197518598600 ) ) ; +#7320 = EDGE_CURVE ( 'NONE', #11471, #7844, #2995, .T. ) ; +#7321 = CARTESIAN_POINT ( 'NONE', ( 2.260467352156278100, -18.83927295214755300, 9.200911032789623100 ) ) ; +#7322 = CARTESIAN_POINT ( 'NONE', ( 2.500050626908438800, -21.22957849784041400, 7.839037054241382300 ) ) ; +#7323 = CARTESIAN_POINT ( 'NONE', ( 32.81572925789322400, -28.37708389684552700, 24.59929491938847700 ) ) ; +#7324 = CARTESIAN_POINT ( 'NONE', ( 6.340743662418351100, -30.60126146258398100, 25.70268007781895000 ) ) ; +#7325 = CARTESIAN_POINT ( 'NONE', ( 36.99007025665306300, -18.68695739788022800, -16.75101624612743800 ) ) ; +#7326 = EDGE_LOOP ( 'NONE', ( #4095, #5276, #13167, #7137, #3282, #12120 ) ) ; +#7327 = CARTESIAN_POINT ( 'NONE', ( 41.64196817669201800, -10.00000000000000500, 11.53210943955309600 ) ) ; +#7328 = CARTESIAN_POINT ( 'NONE', ( 16.68246815979363300, -12.50000000000000000, 10.00020139029762800 ) ) ; +#7329 = AXIS2_PLACEMENT_3D ( 'NONE', #7671, #1026, #8812 ) ; +#7330 = CARTESIAN_POINT ( 'NONE', ( -0.2744604291701066600, -10.00000000000000000, 16.06877699293860900 ) ) ; +#7331 = FACE_BOUND ( 'NONE', #12484, .T. ) ; +#7332 = CARTESIAN_POINT ( 'NONE', ( 30.76055427982418800, -30.42974572459707600, 27.26149612329780700 ) ) ; +#7333 = CARTESIAN_POINT ( 'NONE', ( 7.764920090257830600, -20.70413068738008300, 19.47757146459931100 ) ) ; +#7334 = CARTESIAN_POINT ( 'NONE', ( 8.051087409537013100, -30.39334222594292700, 26.72622980041811800 ) ) ; +#7335 = CARTESIAN_POINT ( 'NONE', ( 36.17498640099523000, -28.98205076566884100, 22.61988819547531200 ) ) ; +#7336 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #7298, #6221 ), + ( #14033, #7352 ), + ( #724, #8505 ), + ( #1821, #9630 ), + ( #2924, #10765 ), + ( #4032, #11874 ), + ( #5148, #12984 ), + ( #6273, #14086 ), + ( #7415, #775 ), + ( #8558, #1878 ), + ( #9687, #2976 ), + ( #10822, #4092 ), + ( #11926, #5201 ), + ( #13043, #6330 ), + ( #14140, #7470 ), + ( #832, #8615 ), + ( #1926, #9742 ), + ( #3031, #10877 ), + ( #4141, #11980 ), + ( #5252, #13092 ), + ( #6386, #14191 ), + ( #7520, #879 ), + ( #8666, #1974 ), + ( #9790, #3085 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1250000000000011100, 0.1875000000000014200, 0.2500000000000017200, 0.3750000000000018300, 0.4375000000000018900, 0.5000000000000018900, 0.6250000000000015500, 0.6875000000000013300, 0.7500000000000011100, 0.8750000000000006700, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#7337 = ORIENTED_EDGE ( 'NONE', *, *, #4340, .T. ) ; +#7338 = CARTESIAN_POINT ( 'NONE', ( 2.500000000003648200, -95.24421259199476700, 8.331288511293182700 ) ) ; +#7339 = EDGE_CURVE ( 'NONE', #7844, #8083, #1024, .T. ) ; +#7340 = CARTESIAN_POINT ( 'NONE', ( 4.373190475442515700, -30.22700170161233000, 24.27372914320528700 ) ) ; +#7341 = CARTESIAN_POINT ( 'NONE', ( 6.915475261047643800, -32.06305842516837900, 25.36675889730100800 ) ) ; +#7342 = CARTESIAN_POINT ( 'NONE', ( 33.85153314668244900, -89.50553548956821700, 5.756509624865228300 ) ) ; +#7343 = CARTESIAN_POINT ( 'NONE', ( 0.3187501131847146900, -11.29612748971815300, 9.666886013035306000 ) ) ; +#7344 = CARTESIAN_POINT ( 'NONE', ( 26.57608945946901700, -22.03500000000001400, 19.71084270027877800 ) ) ; +#7345 = CARTESIAN_POINT ( 'NONE', ( 29.24733666064011900, -30.81493802374267700, 27.78255980892720300 ) ) ; +#7346 = DIRECTION ( 'NONE', ( -0.4424554719047520400, -2.090503812991890300E-014, 0.8967904746269016500 ) ) ; +#7347 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, 22.50000000000000400 ) ) ; +#7348 = CARTESIAN_POINT ( 'NONE', ( 24.40836146087541200, -30.70521429971857000, 28.77076004141654400 ) ) ; +#7349 = ORIENTED_EDGE ( 'NONE', *, *, #4599, .T. ) ; +#7350 = CARTESIAN_POINT ( 'NONE', ( 36.43606032399239300, -30.57197834044898200, 21.55062862878086300 ) ) ; +#7351 = CARTESIAN_POINT ( 'NONE', ( 2.601645726998350400, -29.97917159722627600, 21.56166213730493600 ) ) ; +#7352 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -100.0000000000000300, -26.47095103470434900 ) ) ; +#7353 = CARTESIAN_POINT ( 'NONE', ( 35.06928595474302300, -12.49999999999892500, 10.51316855649475100 ) ) ; +#7354 = CARTESIAN_POINT ( 'NONE', ( 32.70175439346326800, -30.17000793194652500, 26.31796990871388400 ) ) ; +#7355 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669239200 ) ) ; +#7356 = ORIENTED_EDGE ( 'NONE', *, *, #5133, .F. ) ; +#7357 = CARTESIAN_POINT ( 'NONE', ( 29.72890493857763900, -10.69443754029932800, -25.00000000000028800 ) ) ; +#7358 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999882800, -29.99786813094171500, 21.55836633260284800 ) ) ; +#7359 = CARTESIAN_POINT ( 'NONE', ( 14.02443405587050400, -12.50000000000007300, -22.44973729312460300 ) ) ; +#7360 = FACE_OUTER_BOUND ( 'NONE', #3196, .T. ) ; +#7361 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#7362 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#7363 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001400, -12.50000000000001800, 25.00105000000002100 ) ) ; +#7364 = ORIENTED_EDGE ( 'NONE', *, *, #7913, .T. ) ; +#7365 = CARTESIAN_POINT ( 'NONE', ( 24.27489089933802200, -19.69601987041403000, 23.19197597623325900 ) ) ; +#7366 = CARTESIAN_POINT ( 'NONE', ( 14.68528734847384800, -12.50000000000019700, 21.73968774626549600 ) ) ; +#7367 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 12.00000000000000000, -19.99999999999999600 ) ) ; +#7368 = CARTESIAN_POINT ( 'NONE', ( 25.67957561374824800, -19.99632673461284300, 22.89503262545875700 ) ) ; +#7369 = CARTESIAN_POINT ( 'NONE', ( 10.24083688732646600, -30.92263236860738500, 27.58356118751883900 ) ) ; +#7370 = CARTESIAN_POINT ( 'NONE', ( 35.44258030154604500, -30.12581155690005400, 24.47615010915823300 ) ) ; +#7371 = CARTESIAN_POINT ( 'NONE', ( 8.900856827154150600, -23.75853100878437700, 16.58321759247844800 ) ) ; +#7372 = EDGE_LOOP ( 'NONE', ( #11955, #9454, #6629 ) ) ; +#7373 = CARTESIAN_POINT ( 'NONE', ( 6.938320435668615900, -19.08063605976343900, 19.13708922878530300 ) ) ; +#7374 = FACE_BOUND ( 'NONE', #11766, .T. ) ; +#7375 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12775, #11672, #13876, #7193 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001281629733952248900 ), + .UNSPECIFIED. ) ; +#7376 = ADVANCED_FACE ( 'NONE', ( #605 ), #336, .F. ) ; +#7377 = CARTESIAN_POINT ( 'NONE', ( 2.198311204633673900, -18.79477880342448500, 7.944085850578087400 ) ) ; +#7378 = CARTESIAN_POINT ( 'NONE', ( 39.23655348250195400, -11.88933880409140900, 11.20353506290160300 ) ) ; +#7379 = CARTESIAN_POINT ( 'NONE', ( 6.452999809823074500, -29.76244604200788000, 25.68929704666271600 ) ) ; +#7380 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000900, 17.50000000000000400 ) ) ; +#7381 = CARTESIAN_POINT ( 'NONE', ( 38.05523332160215200, -11.88479853951652900, 15.08738309158933600 ) ) ; +#7382 = ORIENTED_EDGE ( 'NONE', *, *, #12366, .T. ) ; +#7383 = AXIS2_PLACEMENT_3D ( 'NONE', #12131, #5398, #13242 ) ; +#7384 = CARTESIAN_POINT ( 'NONE', ( 16.52588349782477200, -19.00051484900026500, 23.41296639185414800 ) ) ; +#7385 = CARTESIAN_POINT ( 'NONE', ( 13.88660572777493100, -24.16191752790741600, 19.45933662632501200 ) ) ; +#7386 = CARTESIAN_POINT ( 'NONE', ( 35.28370899913753800, -12.20654844648765200, -22.36918696422122100 ) ) ; +#7387 = CARTESIAN_POINT ( 'NONE', ( 3.532360000501055400, -20.15367523100074000, -17.13896669283610700 ) ) ; +#7388 = CARTESIAN_POINT ( 'NONE', ( 4.620924984197163400, -10.00000000000182800, 20.07403682822268800 ) ) ; +#7389 = CIRCLE ( 'NONE', #9708, 5.000000000000000900 ) ; +#7390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7391 = ORIENTED_EDGE ( 'NONE', *, *, #11175, .T. ) ; +#7392 = CARTESIAN_POINT ( 'NONE', ( 30.77097474924128000, -30.76778265570166900, 27.22622950363475500 ) ) ; +#7393 = VECTOR ( 'NONE', #6779, 1000.000000000000000 ) ; +#7394 = CARTESIAN_POINT ( 'NONE', ( 3.154097303417859900, -28.83317906846855600, 20.54706853674638000 ) ) ; +#7395 = CARTESIAN_POINT ( 'NONE', ( 8.372569340717031800, -31.08314870811590000, 26.69153632632603000 ) ) ; +#7396 = CARTESIAN_POINT ( 'NONE', ( 37.08373677351975300, -29.97997164147475100, 22.44418988038972900 ) ) ; +#7397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7398 = EDGE_CURVE ( 'NONE', #6338, #4036, #504, .T. ) ; +#7399 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -96.23082734599096000, 5.350767952454488900 ) ) ; +#7400 = VERTEX_POINT ( 'NONE', #10664 ) ; +#7401 = CARTESIAN_POINT ( 'NONE', ( 4.831016753009548900, -29.20085972112981000, 24.05251798524820500 ) ) ; +#7402 = CARTESIAN_POINT ( 'NONE', ( 6.859207246441876300, -36.91504296463502800, 15.77007779198389200 ) ) ; +#7403 = CARTESIAN_POINT ( 'NONE', ( 28.98176329627722600, -95.07596123493894400, 14.90794226952058700 ) ) ; +#7404 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.821883710440932400, 13.81065672387817000 ) ) ; +#7405 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.781278341185187100, -24.99999999999999600 ) ) ; +#7406 = LINE ( 'NONE', #4535, #7393 ) ; +#7407 = CARTESIAN_POINT ( 'NONE', ( 29.14591341447194100, -30.74585213437398000, 27.82618779921520900 ) ) ; +#7408 = CARTESIAN_POINT ( 'NONE', ( 24.90918122861845100, -99.99999999999998600, 21.55101145228844900 ) ) ; +#7409 = CARTESIAN_POINT ( 'NONE', ( 2.652972237054824800, -13.13015780543790700, -19.39174776206622800 ) ) ; +#7410 = CARTESIAN_POINT ( 'NONE', ( 39.54412931701640600, -11.82348273193436900, 8.181953171736212800 ) ) ; +#7411 = ORIENTED_EDGE ( 'NONE', *, *, #8753, .F. ) ; +#7412 = AXIS2_PLACEMENT_3D ( 'NONE', #13154, #5316, #8722 ) ; +#7413 = CARTESIAN_POINT ( 'NONE', ( 36.15980844607722800, -30.74569801094227000, 22.27206565573608500 ) ) ; +#7414 = CARTESIAN_POINT ( 'NONE', ( 3.359155854342397200, -28.94795825350038900, 21.74349301863661700 ) ) ; +#7415 = CARTESIAN_POINT ( 'NONE', ( 6.624150107193320200, -20.28809933266904900, -17.91256862238675000 ) ) ; +#7416 = CARTESIAN_POINT ( 'NONE', ( 24.96870393656357800, -12.50000000000001200, 7.979460817762444900 ) ) ; +#7417 = CARTESIAN_POINT ( 'NONE', ( 32.70175120164248000, -30.88944356611987300, 26.19112813054020000 ) ) ; +#7418 = CARTESIAN_POINT ( 'NONE', ( 2.624241848186411400, -20.05762626732137800, -13.74726856436172200 ) ) ; +#7419 = VERTEX_POINT ( 'NONE', #3945 ) ; +#7420 = CARTESIAN_POINT ( 'NONE', ( 30.45504636068012900, -11.40145399702317700, -24.99999999999999600 ) ) ; +#7421 = CARTESIAN_POINT ( 'NONE', ( 5.375884876335520700, -10.03050931533410400, 22.83966867431233500 ) ) ; +#7422 = CARTESIAN_POINT ( 'NONE', ( 16.56893094553913700, -12.50000000000000500, -14.36444722994854200 ) ) ; +#7423 = EDGE_CURVE ( 'NONE', #12126, #3673, #323, .T. ) ; +#7424 = CIRCLE ( 'NONE', #13294, 5.000000000000000900 ) ; +#7425 = CARTESIAN_POINT ( 'NONE', ( 12.93006893069215800, -11.79503796356002700, 24.68348637562840200 ) ) ; +#7426 = CARTESIAN_POINT ( 'NONE', ( 5.398942813069991700, -10.12077218826230600, -25.00000000000000000 ) ) ; +#7427 = ORIENTED_EDGE ( 'NONE', *, *, #3513, .F. ) ; +#7428 = CARTESIAN_POINT ( 'NONE', ( 22.76613153399757300, -19.43684353936168900, 23.35251461146101400 ) ) ; +#7429 = CARTESIAN_POINT ( 'NONE', ( 17.16680237261370900, -12.50000000000000500, 10.11912744593743000 ) ) ; +#7430 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -91.86267603409065400, -1.965365239441870600 ) ) ; +#7431 = CARTESIAN_POINT ( 'NONE', ( 10.23987563135694700, -30.78263601077428300, 27.61612735404167300 ) ) ; +#7432 = CARTESIAN_POINT ( 'NONE', ( 35.03001573251385300, -31.03504595199222400, 23.93237205057488000 ) ) ; +#7433 = CARTESIAN_POINT ( 'NONE', ( 8.525991337493987700, -12.50000000000027700, 18.28603975589300700 ) ) ; +#7434 = ORIENTED_EDGE ( 'NONE', *, *, #7608, .F. ) ; +#7435 = AXIS2_PLACEMENT_3D ( 'NONE', #8767, #2074, #9896 ) ; +#7436 = CARTESIAN_POINT ( 'NONE', ( 39.96147503065169800, 6.290433759120639400, 20.63077328774388900 ) ) ; +#7437 = DIRECTION ( 'NONE', ( -1.000000000000000000, 4.336808689942017700E-017, 7.646963822076800200E-018 ) ) ; +#7438 = CARTESIAN_POINT ( 'NONE', ( 2.397732623615155500, -19.58644279377982400, 7.969316931952103100 ) ) ; +#7439 = CARTESIAN_POINT ( 'NONE', ( 30.76771414488736400, -11.87804419278903200, 23.14344557606189000 ) ) ; +#7440 = CARTESIAN_POINT ( 'NONE', ( 6.494176130875590800, -30.92513980070561500, 25.61543885733237500 ) ) ; +#7441 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -7.520606794341281500, 25.00000000000000000 ) ) ; +#7442 = CIRCLE ( 'NONE', #13222, 3.189999999999994200 ) ; +#7443 = CARTESIAN_POINT ( 'NONE', ( 35.37904185446769400, -9.999999999994525300, 20.07407234823006400 ) ) ; +#7444 = CARTESIAN_POINT ( 'NONE', ( 23.47411650217504300, -18.56639440483320800, 20.95094700932356700 ) ) ; +#7445 = CARTESIAN_POINT ( 'NONE', ( 28.16730879351690900, -30.65936817474672100, 28.13344677789584100 ) ) ; +#7446 = CARTESIAN_POINT ( 'NONE', ( 39.82426284177695000, -10.70294863289214300, 10.93855415858870800 ) ) ; +#7447 = EDGE_CURVE ( 'NONE', #8083, #2348, #10164, .T. ) ; +#7448 = CARTESIAN_POINT ( 'NONE', ( 5.385319303563929500, -18.57898325667237300, -21.25815340853377900 ) ) ; +#7449 = CARTESIAN_POINT ( 'NONE', ( 7.379038869839814800, -11.87884564984522700, 21.91158851826835600 ) ) ; +#7450 = DIRECTION ( 'NONE', ( 6.938893903907224400E-016, -6.938893903907219500E-016, 1.000000000000000000 ) ) ; +#7451 = ORIENTED_EDGE ( 'NONE', *, *, #9249, .T. ) ; +#7452 = CARTESIAN_POINT ( 'NONE', ( 30.65787654418915400, -30.40014372716008900, 27.30211720413553400 ) ) ; +#7453 = CARTESIAN_POINT ( 'NONE', ( 5.035560771533515600, -26.13499052900537100, 15.54679702744486000 ) ) ; +#7454 = CARTESIAN_POINT ( 'NONE', ( 8.337116343999476000, -30.59445561363875800, 26.85221351503997400 ) ) ; +#7455 = CARTESIAN_POINT ( 'NONE', ( 36.14632539680413700, -30.75429521552727200, 22.30774221959395800 ) ) ; +#7456 = CARTESIAN_POINT ( 'NONE', ( 2.587343716415116300, -91.27442453182199200, -1.521502677801896100 ) ) ; +#7457 = CARTESIAN_POINT ( 'NONE', ( 4.462247058416902100, -30.50800774418246100, 24.18436561484770300 ) ) ; +#7458 = CARTESIAN_POINT ( 'NONE', ( 5.858414989983229400, -31.22753124918972000, 15.77685882675426800 ) ) ; +#7459 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000700, -95.07596123493894400, 9.998812624573373500 ) ) ; +#7460 = CARTESIAN_POINT ( 'NONE', ( 2.366003869806058400, -10.00577354972706300, 20.10430461088512600 ) ) ; +#7461 = CARTESIAN_POINT ( 'NONE', ( 10.62444054533190400, -10.07396740429556900, -24.99999999999999300 ) ) ; +#7462 = CARTESIAN_POINT ( 'NONE', ( 29.14465646360868700, -30.80282277317843100, 27.81758214900784800 ) ) ; +#7463 = CARTESIAN_POINT ( 'NONE', ( 37.37575891555471200, -20.05762682312945000, -13.74728649397447300 ) ) ; +#7464 = CARTESIAN_POINT ( 'NONE', ( 25.55273744702385800, -30.73015094776009400, 28.68741507210991100 ) ) ; +#7465 = ADVANCED_FACE ( 'NONE', ( #13653 ), #271, .T. ) ; +#7466 = CARTESIAN_POINT ( 'NONE', ( 15.67651462047581200, -97.40634803306923600, 22.08790255657622800 ) ) ; +#7467 = ORIENTED_EDGE ( 'NONE', *, *, #13957, .T. ) ; +#7468 = CARTESIAN_POINT ( 'NONE', ( 35.33375854487160700, -30.99580136307555700, 23.52357210368636600 ) ) ; +#7469 = CARTESIAN_POINT ( 'NONE', ( 3.124695902510965100, -30.37634295578076400, 21.55977604619968300 ) ) ; +#7470 = CARTESIAN_POINT ( 'NONE', ( 9.818323438264403800, -100.0000000000000300, -35.71643108392894600 ) ) ; +#7471 = EDGE_CURVE ( 'NONE', #314, #12696, #620, .T. ) ; +#7472 = CARTESIAN_POINT ( 'NONE', ( 32.46992244552006900, -29.96593204460604200, 26.38973737772628400 ) ) ; +#7473 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -12.50000000000001100, 7.564513562858110200 ) ) ; +#7474 = CARTESIAN_POINT ( 'NONE', ( 8.993994320536771200, -9.832644042916088600, 25.00000000000000400 ) ) ; +#7475 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999991100, -97.04517183358916600, 16.23828164244107300 ) ) ; +#7476 = CARTESIAN_POINT ( 'NONE', ( 11.84841482255960800, -20.95206677476074500, -23.05599279212712100 ) ) ; +#7477 = CARTESIAN_POINT ( 'NONE', ( -2.393460460216109400, -95.07596123493894400, -1.866925240466775800 ) ) ; +#7478 = CARTESIAN_POINT ( 'NONE', ( 14.33917067318916600, -14.87376955486322800, 24.14062292972214500 ) ) ; +#7479 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7480 = CARTESIAN_POINT ( 'NONE', ( 11.01823670372231400, -95.07596123493894400, 14.90794226952291100 ) ) ; +#7481 = APPROVAL_PERSON_ORGANIZATION ( #7499, #13943, #2305 ) ; +#7482 = DIRECTION ( 'NONE', ( 6.383782391594648800E-014, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7483 = ORIENTED_EDGE ( 'NONE', *, *, #6594, .F. ) ; +#7484 = CARTESIAN_POINT ( 'NONE', ( 5.667854478047169100, -17.46144121665314200, -22.04139510161434100 ) ) ; +#7485 = CARTESIAN_POINT ( 'NONE', ( 10.24077462383803000, -30.61934320391055300, 27.63744727692999000 ) ) ; +#7486 = CARTESIAN_POINT ( 'NONE', ( 35.20441586158557400, -29.82927729934481700, 24.58094963826407700 ) ) ; +#7487 = CARTESIAN_POINT ( 'NONE', ( 13.13967919495902100, -28.10721621194917200, 27.02101548925832500 ) ) ; +#7488 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#7489 = EDGE_CURVE ( 'NONE', #5973, #9622, #486, .T. ) ; +#7490 = CARTESIAN_POINT ( 'NONE', ( 8.790914621942297600, -28.26748272103479900, 25.46783778535116100 ) ) ; +#7491 = CARTESIAN_POINT ( 'NONE', ( 2.499505460283671300, -20.40174586625538600, 7.970270411468409800 ) ) ; +#7492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7493 = CARTESIAN_POINT ( 'NONE', ( 6.452516106633777500, -30.13110653323396100, 25.81623802343907300 ) ) ; +#7494 = CARTESIAN_POINT ( 'NONE', ( 22.60237864385764100, -19.90864822626172500, 23.25255904423485000 ) ) ; +#7495 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5531, #6665, #1160, #8945 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001504306358318354900 ), + .UNSPECIFIED. ) ; +#7496 = FACE_OUTER_BOUND ( 'NONE', #6377, .T. ) ; +#7497 = CARTESIAN_POINT ( 'NONE', ( 34.07522228347090700, -9.999999999999996400, 23.84902558118219300 ) ) ; +#7498 = CARTESIAN_POINT ( 'NONE', ( 25.27285999918454400, -33.32768944524603000, 28.33792997632382100 ) ) ; +#7499 = PERSON_AND_ORGANIZATION ( #9068, #11176 ) ; +#7500 = CARTESIAN_POINT ( 'NONE', ( 3.563751049542427800, -28.88119157963205600, 21.84817237919673300 ) ) ; +#7501 = ORIENTED_EDGE ( 'NONE', *, *, #8066, .F. ) ; +#7502 = CARTESIAN_POINT ( 'NONE', ( 9.613664763075059100, -22.28400028643651300, -24.90076525975552400 ) ) ; +#7503 = CARTESIAN_POINT ( 'NONE', ( 12.01930265336835800, -10.00000000000000400, 26.91399641884086700 ) ) ; +#7504 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.450179750222239400E-015, -24.99999999999999600 ) ) ; +#7505 = CARTESIAN_POINT ( 'NONE', ( 30.67152723323572900, -30.69812609952052500, 27.28200219814298000 ) ) ; +#7506 = CARTESIAN_POINT ( 'NONE', ( 2.797703622232790000, -24.96335050882054700, 10.25075591808654000 ) ) ; +#7507 = CARTESIAN_POINT ( 'NONE', ( 8.374364397038247500, -30.14615119691414000, 26.85298621303802600 ) ) ; +#7508 = CARTESIAN_POINT ( 'NONE', ( 36.86598261029001800, -29.67832902671517900, 22.72719747406202700 ) ) ; +#7509 = CARTESIAN_POINT ( 'NONE', ( 4.698055666661897300, -29.41161037130763500, 24.16919078254035100 ) ) ; +#7510 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -10.00000000000000000, -19.99999999999999600 ) ) ; +#7511 = DIRECTION ( 'NONE', ( -0.02364944212992628800, -0.9997203128310154800, 0.0000000000000000000 ) ) ; +#7512 = ORIENTED_EDGE ( 'NONE', *, *, #7997, .F. ) ; +#7513 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9991267550157736400, 0.04178190292040556700 ) ) ; +#7514 = CARTESIAN_POINT ( 'NONE', ( 36.54546924690092900, -21.67295997392855600, -17.19695567884173200 ) ) ; +#7515 = CARTESIAN_POINT ( 'NONE', ( 14.96996094593346300, -19.96530867676110100, 23.02462242810851800 ) ) ; +#7516 = CARTESIAN_POINT ( 'NONE', ( 5.840391219197005800, -100.0000000000000000, 19.04337566497151700 ) ) ; +#7517 = CARTESIAN_POINT ( 'NONE', ( 34.35491642818382700, -31.13022768750975200, 24.60675960654045400 ) ) ; +#7518 = EDGE_CURVE ( 'NONE', #2348, #635, #5087, .T. ) ; +#7519 = CARTESIAN_POINT ( 'NONE', ( 2.818701188102220400, -29.25011570488464900, 21.75855865006000300 ) ) ; +#7520 = CARTESIAN_POINT ( 'NONE', ( 15.84199828593764900, -20.28809933266904900, -24.23002184978981100 ) ) ; +#7521 = ORIENTED_EDGE ( 'NONE', *, *, #6150, .T. ) ; +#7522 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -31.29513776008465000, 28.74509265499353500 ) ) ; +#7523 = CARTESIAN_POINT ( 'NONE', ( 32.54068953133074200, -30.65837447280658500, 26.39005074316950000 ) ) ; +#7524 = CARTESIAN_POINT ( 'NONE', ( 12.49355494771896600, -10.02417599027534000, 25.00000000000000000 ) ) ; +#7525 = CARTESIAN_POINT ( 'NONE', ( 0.09424383493262789000, -10.37697533973045200, 11.21177349352619100 ) ) ; +#7526 = CARTESIAN_POINT ( 'NONE', ( 12.20553433800638600, -12.49999999999996400, -21.76532577682588300 ) ) ; +#7527 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000006400, -12.50000000000000400, -14.54982113999827800 ) ) ; +#7528 = ORIENTED_EDGE ( 'NONE', *, *, #10155, .F. ) ; +#7529 = AXIS2_PLACEMENT_3D ( 'NONE', #14248, #7581, #935 ) ; +#7530 = CARTESIAN_POINT ( 'NONE', ( 8.041583251710964200, -95.07596123493894400, 6.647750091011087800 ) ) ; +#7531 = CARTESIAN_POINT ( 'NONE', ( 15.38924642556909100, -94.74613513877953600, 18.64381943391278900 ) ) ; +#7532 = VERTEX_POINT ( 'NONE', #6281 ) ; +#7533 = CARTESIAN_POINT ( 'NONE', ( 22.93599902370577900, -19.66052431726578600, 23.29592767205711100 ) ) ; +#7534 = CARTESIAN_POINT ( 'NONE', ( 5.771901278175064900, -12.19510205258010900, -25.38705571728128200 ) ) ; +#7535 = CARTESIAN_POINT ( 'NONE', ( 10.44473817445941100, -30.83112772335229600, 27.67770564228803600 ) ) ; +#7536 = CARTESIAN_POINT ( 'NONE', ( 35.09327761511260500, -30.80848303251227100, 24.30073633625257300 ) ) ; +#7537 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -27.09143239524033600, 6.754920151478383000 ) ) ; +#7538 = EDGE_CURVE ( 'NONE', #13947, #9994, #136, .T. ) ; +#7539 = CARTESIAN_POINT ( 'NONE', ( 14.26429955553000900, -20.82200445230971300, -23.98148740284424100 ) ) ; +#7540 = ADVANCED_FACE ( 'NONE', ( #13327 ), #730, .F. ) ; +#7541 = EDGE_LOOP ( 'NONE', ( #10407, #1870, #5139, #8137 ) ) ; +#7542 = CARTESIAN_POINT ( 'NONE', ( 2.501005508355135500, -21.21650421472590200, 7.967186323575569800 ) ) ; +#7543 = CARTESIAN_POINT ( 'NONE', ( 30.21513839476101300, -12.66549609558552400, -25.08649169343632600 ) ) ; +#7544 = CARTESIAN_POINT ( 'NONE', ( 6.743475593176470700, -31.15146868771821100, 25.59474204448661200 ) ) ; +#7545 = CARTESIAN_POINT ( 'NONE', ( 14.77715515048994500, -16.78692661747166400, -26.19671827874864400 ) ) ; +#7546 = CARTESIAN_POINT ( 'NONE', ( 27.28973052401069000, -11.87722406420823300, 24.59349755354202900 ) ) ; +#7547 = CARTESIAN_POINT ( 'NONE', ( 26.98317979267831700, -31.87373873857588400, 20.46251347879643100 ) ) ; +#7548 = CARTESIAN_POINT ( 'NONE', ( 3.759776775651705500, -28.94486096953101800, 22.41522794831591300 ) ) ; +#7549 = CARTESIAN_POINT ( 'NONE', ( 9.846286255644304900, -99.99999999999995700, 3.973589276607479600 ) ) ; +#7550 = VERTEX_POINT ( 'NONE', #11932 ) ; +#7551 = CARTESIAN_POINT ( 'NONE', ( 12.38804680045727500, -20.40739269746199700, -25.93219488026635800 ) ) ; +#7552 = CARTESIAN_POINT ( 'NONE', ( 30.65791451365651100, -31.00935009223125100, 27.19478995630090500 ) ) ; +#7553 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.450179750222239400E-015, -24.99999999999999600 ) ) ; +#7554 = CARTESIAN_POINT ( 'NONE', ( 8.436364351395715400, -30.71728450588146200, 26.87625531178821700 ) ) ; +#7555 = CARTESIAN_POINT ( 'NONE', ( 36.11862640494348400, -30.75817190196329100, 22.49795655108945900 ) ) ; +#7556 = VERTEX_POINT ( 'NONE', #5208 ) ; +#7557 = CARTESIAN_POINT ( 'NONE', ( 22.83541875989299200, -12.50000000000000200, -14.54982113999827900 ) ) ; +#7558 = EDGE_CURVE ( 'NONE', #9917, #11560, #4734, .T. ) ; +#7559 = CARTESIAN_POINT ( 'NONE', ( 4.843540863429633500, -30.88826186014954100, 24.07626382601071700 ) ) ; +#7560 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8394, #4984, #2764, #1714, #9519, #2809, #10651, #3930, #11765, #5030 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 9.109858671234216600E-016, 0.002664366262874125300, 0.005328732525747339000, 0.007993098788620556600, 0.01065746505149377600 ), + .UNSPECIFIED. ) ; +#7561 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -94.55886597733071100, 14.57676706249768200 ) ) ; +#7562 = ORIENTED_EDGE ( 'NONE', *, *, #10403, .F. ) ; +#7563 = VECTOR ( 'NONE', #12365, 1000.000000000000000 ) ; +#7564 = CARTESIAN_POINT ( 'NONE', ( 33.96599400249992600, -18.55950510776179400, -22.05757383261385100 ) ) ; +#7565 = CARTESIAN_POINT ( 'NONE', ( 23.66292631866175000, -19.18949841699696900, 23.36467695346058100 ) ) ; +#7566 = CARTESIAN_POINT ( 'NONE', ( 26.17839116457451700, -31.10615637425000600, 28.47904156249293500 ) ) ; +#7567 = CARTESIAN_POINT ( 'NONE', ( 32.67870884360316100, -31.15719036828982900, 26.00890530627505000 ) ) ; +#7568 = CARTESIAN_POINT ( 'NONE', ( 3.542064932095000600, -30.56853860002531300, 21.58814959722919000 ) ) ; +#7569 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#7570 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -94.68648130466903000, 20.44522513542782200 ) ) ; +#7571 = ORIENTED_EDGE ( 'NONE', *, *, #8158, .T. ) ; +#7572 = CARTESIAN_POINT ( 'NONE', ( 32.09418077954043700, -30.01803166612009100, 26.59878789789649300 ) ) ; +#7573 = CARTESIAN_POINT ( 'NONE', ( 2.985173750640919700, -21.55041497106010000, -15.67909961054608000 ) ) ; +#7574 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, 9.934684141622275500 ) ) ; +#7575 = CARTESIAN_POINT ( 'NONE', ( 16.23656247606505700, -12.50000000000000200, -14.19669084936081500 ) ) ; +#7576 = ORIENTED_EDGE ( 'NONE', *, *, #7320, .F. ) ; +#7577 = FACE_OUTER_BOUND ( 'NONE', #8474, .T. ) ; +#7578 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 1, + ( #1456, #9300 ), + .UNSPECIFIED., .F., .F., + ( 2, 2 ), + ( 0.0000000000000000000, 0.8804997761490701600 ), + .UNSPECIFIED. ) ; +#7579 = DIRECTION ( 'NONE', ( -0.2600637432289629200, 1.288254032795732800E-012, 0.9655914505927132300 ) ) ; +#7580 = CARTESIAN_POINT ( 'NONE', ( 9.029178132022064300, -93.15134209940480000, 21.49807363652084600 ) ) ; +#7581 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7582 = CARTESIAN_POINT ( 'NONE', ( 10.44454811704498800, -30.70344024737201800, 27.69898288355578900 ) ) ; +#7583 = CARTESIAN_POINT ( 'NONE', ( 34.69781873127711700, -29.48543468988151200, 24.72616168678067800 ) ) ; +#7584 = CARTESIAN_POINT ( 'NONE', ( 3.550532966968379200, -30.55079519729964900, 21.46087037243996700 ) ) ; +#7585 = CARTESIAN_POINT ( 'NONE', ( 6.281651855749768900, -21.73402498761162200, -17.46873907732025400 ) ) ; +#7586 = LINE ( 'NONE', #5651, #7563 ) ; +#7587 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -97.04531648070947400, 16.23785755017195200 ) ) ; +#7588 = ORIENTED_EDGE ( 'NONE', *, *, #2690, .F. ) ; +#7589 = CARTESIAN_POINT ( 'NONE', ( 2.205906351809596300, -18.80346739545300500, 8.340857944075928300 ) ) ; +#7590 = FACE_OUTER_BOUND ( 'NONE', #7326, .T. ) ; +#7591 = CARTESIAN_POINT ( 'NONE', ( 6.605776603938259900, -30.40822574172361900, 25.93227963283510100 ) ) ; +#7592 = CARTESIAN_POINT ( 'NONE', ( 13.77758875824720900, -19.68224552648647200, -26.70724112016479200 ) ) ; +#7593 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7594 = AXIS2_PLACEMENT_3D ( 'NONE', #10624, #3903, #11739 ) ; +#7595 = CARTESIAN_POINT ( 'NONE', ( 29.45639236844020200, -38.52588166476186200, 18.24312058641595900 ) ) ; +#7596 = CARTESIAN_POINT ( 'NONE', ( 4.505992420899054300, -29.11966859453645600, 23.64110377659153500 ) ) ; +#7597 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999987600, -99.99999999999995700, -5.268163163413108300 ) ) ; +#7598 = ORIENTED_EDGE ( 'NONE', *, *, #13344, .F. ) ; +#7599 = CARTESIAN_POINT ( 'NONE', ( 15.63972559910463800, -18.43160045006862900, -27.23178916940219500 ) ) ; +#7600 = CARTESIAN_POINT ( 'NONE', ( 37.49999533607219600, -21.23893123719483000, 7.774862847741400400 ) ) ; +#7601 = CARTESIAN_POINT ( 'NONE', ( 30.36874200238871100, -30.65036968344349000, 27.41040860347084500 ) ) ; +#7602 = CARTESIAN_POINT ( 'NONE', ( 23.33308423735437700, -100.0000000000000300, -38.36942826376122900 ) ) ; +#7603 = CARTESIAN_POINT ( 'NONE', ( 8.465043993110821700, -30.20565965761590400, 26.90499370710330100 ) ) ; +#7604 = CARTESIAN_POINT ( 'NONE', ( 36.21995095943021400, -29.36403669185092700, 23.20575113847190400 ) ) ; +#7605 = FACE_OUTER_BOUND ( 'NONE', #7372, .T. ) ; +#7606 = ORIENTED_EDGE ( 'NONE', *, *, #11734, .T. ) ; +#7607 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( + ( #10380, #5814, #4685, #3671, #11519, #4785, #12615, #5909, #13722, #7040, #422, #8189, #1522, #9312, #2608, #10434, #3723, #11564 ), + ( #4827, #12668, #5959, #13766, #7087, #471, #8238, #1565, #9361, #2655, #10485, #3772, #11612, #4875, #12715, #6012, #13817, #7136 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 2, 2 ), + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 3.063052837250048300, 3.269219855141878700, 3.475386873033708700, 3.681553890925538800, 3.887720908817368800, 4.093887926709198800, 4.300054944601029700, 4.506221962492859700, 4.712388980384689700 ), + .UNSPECIFIED. ) ; +#7608 = EDGE_CURVE ( 'NONE', #8489, #659, #12736, .T. ) ; +#7609 = CARTESIAN_POINT ( 'NONE', ( 4.619413120818887100, -29.87633220902296900, 24.46303173773986500 ) ) ; +#7610 = ORIENTED_EDGE ( 'NONE', *, *, #7538, .T. ) ; +#7611 = CARTESIAN_POINT ( 'NONE', ( 30.25209963494933500, -20.36979250089727600, -24.64715292677582100 ) ) ; +#7612 = CARTESIAN_POINT ( 'NONE', ( 37.28008100422174200, -29.31186519935136700, 21.67971748126845100 ) ) ; +#7613 = ADVANCED_FACE ( 'NONE', ( #119 ), #1814, .T. ) ; +#7614 = CARTESIAN_POINT ( 'NONE', ( 20.83200865503380700, -39.55232010390577800, 19.78912862314842900 ) ) ; +#7615 = CARTESIAN_POINT ( 'NONE', ( 31.30319470281294500, -31.06866001955817700, 26.86615313899350000 ) ) ; +#7616 = CARTESIAN_POINT ( 'NONE', ( 2.524212822334675400, -29.61578065841574400, 21.75752964524129900 ) ) ; +#7617 = LINE ( 'NONE', #10616, #3898 ) ; +#7618 = CARTESIAN_POINT ( 'NONE', ( 0.03852661699505106200, 6.290457506769962800, 20.63080313393616200 ) ) ; +#7619 = CARTESIAN_POINT ( 'NONE', ( 32.15375125694194500, -30.54609285503590100, 26.61791689453605500 ) ) ; +#7620 = CARTESIAN_POINT ( 'NONE', ( 10.76497959600434800, -22.33542858842049100, -25.56275494538952100 ) ) ; +#7621 = CARTESIAN_POINT ( 'NONE', ( 10.53877014566755200, -21.05902929537898100, -22.29300224597620400 ) ) ; +#7622 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998700, -99.99999999999998600, -40.86942826376123600 ) ) ; +#7623 = ORIENTED_EDGE ( 'NONE', *, *, #3640, .F. ) ; +#7624 = EDGE_CURVE ( 'NONE', #9017, #10215, #8655, .T. ) ; +#7625 = CARTESIAN_POINT ( 'NONE', ( 19.16515785761972200, -19.84089650271962700, 23.26478443221102000 ) ) ; +#7626 = CARTESIAN_POINT ( 'NONE', ( 6.419350166352819200, -97.45664212686504900, 19.73018982075381400 ) ) ; +#7627 = CARTESIAN_POINT ( 'NONE', ( 38.50150408325201600, -11.79302655811344500, -17.57270382969635100 ) ) ; +#7628 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, -11.53324907984514000 ) ) ; +#7629 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7630 = CARTESIAN_POINT ( 'NONE', ( 10.75162378234613800, -30.86240334071025900, 27.77269985964532900 ) ) ; +#7631 = CARTESIAN_POINT ( 'NONE', ( 34.93996490555649400, -30.48155854555451300, 24.80542000789656900 ) ) ; +#7632 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -22.50000000000000700, -11.97268808056957200 ) ) ; +#7633 = DIRECTION ( 'NONE', ( -0.9998119278664178200, -0.01909889591383903000, -0.003367650651352299600 ) ) ; +#7634 = ORIENTED_EDGE ( 'NONE', *, *, #2713, .F. ) ; +#7635 = CARTESIAN_POINT ( 'NONE', ( 2.421021756250890400, -19.57805086785998900, 8.831825844323653000 ) ) ; +#7636 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -30.66316004106086600, 28.85652737806401900 ) ) ; +#7637 = CARTESIAN_POINT ( 'NONE', ( 6.750323888578280100, -29.69805626891466900, 25.84075790216916200 ) ) ; +#7638 = CARTESIAN_POINT ( 'NONE', ( 15.46519350194316000, -21.80119838040304700, -26.99296296699343900 ) ) ; +#7639 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7640 = CARTESIAN_POINT ( 'NONE', ( 35.79525908243108700, -31.00544597193953000, 22.72000988592828800 ) ) ; +#7641 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #10769, #8509, #11877 ), + ( #5151, #12989, #6278 ), + ( #14089, #7418, #8345 ), + ( #9462, #9609, #2900 ), + ( #10739, #4012, #11850 ), + ( #5125, #12962, #6252 ), + ( #14063, #7387, #753 ), + ( #8533, #1855, #9663 ), + ( #2957, #10797, #4065 ), + ( #11904, #5179, #13019 ), + ( #6307, #14119, #7448 ), + ( #807, #8592, #1906 ), + ( #9721, #3010, #10857 ), + ( #4121, #11960, #5232 ), + ( #13072, #6364, #14172 ), + ( #7502, #863, #8643 ), + ( #1956, #9771, #3065 ), + ( #10909, #4175, #12011 ), + ( #5281, #13124, #6417 ), + ( #14221, #7551, #904 ), + ( #8697, #2003, #9817 ), + ( #3113, #10963, #4224 ), + ( #12058, #5334, #13172 ), + ( #6462, #14264, #7599 ), + ( #951, #8739, #2050 ), + ( #9864, #3156, #11004 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.331034670843834500E-018, 0.004940532989147791500, 0.007410799483721688600, 0.009881065978295584800, 0.01482159896744337900, 0.01729186546201727500, 0.01976213195659117300, 0.02470266494573896500, 0.02717293144031286300, 0.02964319793488676100, 0.03211346442946065600, 0.03458373092403455000, 0.03952426391318234600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9925120726376612800, 1.000000000000000000), + ( 1.000000000000000000, 0.9918527387674055400, 1.000000000000000000), + ( 1.000000000000000000, 0.9911644549925549000, 1.000000000000000000), + ( 1.000000000000000000, 0.9900924400249860900, 1.000000000000000000), + ( 1.000000000000000000, 0.9897289204347862200, 1.000000000000000000), + ( 1.000000000000000000, 0.9889901136384052800, 1.000000000000000000), + ( 1.000000000000000000, 0.9886127393858600300, 1.000000000000000000), + ( 1.000000000000000000, 0.9874865723395753700, 1.000000000000000000), + ( 1.000000000000000000, 0.9867418293912352300, 1.000000000000000000), + ( 1.000000000000000000, 0.9856457638254120200, 1.000000000000000000), + ( 1.000000000000000000, 0.9852842310882256000, 1.000000000000000000), + ( 1.000000000000000000, 0.9845720280620350300, 1.000000000000000000), + ( 1.000000000000000000, 0.9842257372504017400, 1.000000000000000000), + ( 1.000000000000000000, 0.9832263197399590000, 1.000000000000000000), + ( 1.000000000000000000, 0.9826102444727078400, 1.000000000000000000), + ( 1.000000000000000000, 0.9817790970711023400, 1.000000000000000000), + ( 1.000000000000000000, 0.9815167263849373700, 1.000000000000000000), + ( 1.000000000000000000, 0.9810380132454701300, 1.000000000000000000), + ( 1.000000000000000000, 0.9808201878513361800, 1.000000000000000000), + ( 1.000000000000000000, 0.9804288848571881500, 1.000000000000000000), + ( 1.000000000000000000, 0.9802554565966452600, 1.000000000000000000), + ( 1.000000000000000000, 0.9799558860487216400, 1.000000000000000000), + ( 1.000000000000000000, 0.9798293423257854500, 1.000000000000000000), + ( 1.000000000000000000, 0.9795264374306457100, 1.000000000000000000), + ( 1.000000000000000000, 0.9794315539046387600, 1.000000000000000000), + ( 1.000000000000000000, 0.9794413969049179400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#7642 = CARTESIAN_POINT ( 'NONE', ( 6.155606145324621400, -29.53672760469237700, 25.37040335696530800 ) ) ; +#7643 = CARTESIAN_POINT ( 'NONE', ( 35.82073743793770100, -9.999999999999996400, 22.36143813341930600 ) ) ; +#7644 = EDGE_CURVE ( 'NONE', #10148, #3673, #10728, .T. ) ; +#7645 = CARTESIAN_POINT ( 'NONE', ( 0.002739849957417682400, -10.00000000000000000, -20.16550224408270300 ) ) ; +#7646 = CARTESIAN_POINT ( 'NONE', ( 37.50023266591132700, -20.41325318024754800, 7.791165498960678400 ) ) ; +#7647 = CARTESIAN_POINT ( 'NONE', ( 30.36457905001255100, -30.92397215398219500, 27.35105122124087300 ) ) ; +#7648 = CARTESIAN_POINT ( 'NONE', ( 28.80103478435169300, -20.28809933267076800, -22.60983093486252200 ) ) ; +#7649 = CARTESIAN_POINT ( 'NONE', ( 8.642078456008439600, -30.89548387480956400, 26.91922400842359400 ) ) ; +#7650 = CARTESIAN_POINT ( 'NONE', ( 36.22000297783406400, -30.58199319605212800, 22.98878864142371700 ) ) ; +#7651 = CARTESIAN_POINT ( 'NONE', ( 5.110172334383540800, -31.07042520944575200, 24.05492046032936000 ) ) ; +#7652 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3780, #11338, #12722, #6021 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.1190622218222131800, 0.8106338710392331200 ), + .UNSPECIFIED. ) ; +#7653 = CARTESIAN_POINT ( 'NONE', ( 27.71342827919673700, -22.38857551079893300, -26.24366946355091200 ) ) ; +#7654 = CARTESIAN_POINT ( 'NONE', ( 36.72150862560226900, -30.43731003741295300, 21.48127115605913700 ) ) ; +#7655 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141211300, -30.55092223628113500, 21.46123905850134900 ) ) ; +#7656 = CARTESIAN_POINT ( 'NONE', ( 29.55765852920691500, -30.90298626781646300, 27.66588587770824500 ) ) ; +#7657 = CARTESIAN_POINT ( 'NONE', ( 3.573269190695548000, -28.88521273490889400, 21.88490486534184100 ) ) ; +#7658 = FACE_OUTER_BOUND ( 'NONE', #7691, .T. ) ; +#7659 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997900, -94.87460690261258400, 20.85928444527440500 ) ) ; +#7660 = CARTESIAN_POINT ( 'NONE', ( 32.09703493384270700, -31.11426188253803500, 26.41087753871779500 ) ) ; +#7661 = DATE_AND_TIME ( #7826, #7841 ) ; +#7662 = ORIENTED_EDGE ( 'NONE', *, *, #7339, .T. ) ; +#7663 = CARTESIAN_POINT ( 'NONE', ( 29.20482320791616700, -10.47597545946069900, -25.03472457990225300 ) ) ; +#7664 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -1.972066022637282400, 11.18414218126905600 ) ) ; +#7665 = CARTESIAN_POINT ( 'NONE', ( 10.82962975699536500, -12.50000000000030000, -21.02148025490999200 ) ) ; +#7666 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#7667 = DIRECTION ( 'NONE', ( -0.9997660285782026300, 0.01900642951097185300, 0.01032684551124539600 ) ) ; +#7668 = LINE ( 'NONE', #4195, #1403 ) ; +#7669 = CARTESIAN_POINT ( 'NONE', ( 5.474808194957487800, -94.72210163403907800, 15.44587895064650400 ) ) ; +#7670 = AXIS2_PLACEMENT_3D ( 'NONE', #12703, #4815, #5947 ) ; +#7671 = CARTESIAN_POINT ( 'NONE', ( 17.56133793030465300, -30.22764236918144600, 26.39475436447733300 ) ) ; +#7672 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7673 = CARTESIAN_POINT ( 'NONE', ( 10.75250320342017000, -30.78435119450522400, 27.78786671104781200 ) ) ; +#7674 = CARTESIAN_POINT ( 'NONE', ( 34.46228107351347300, -29.37548492999119200, 24.81206873999332500 ) ) ; +#7675 = ORIENTED_EDGE ( 'NONE', *, *, #9965, .T. ) ; +#7676 = CARTESIAN_POINT ( 'NONE', ( 23.47748312028139100, -12.50000000000060200, 22.03118972310215500 ) ) ; +#7677 = CARTESIAN_POINT ( 'NONE', ( 33.74910367925106400, -31.16370492012024200, 25.16702978165824700 ) ) ; +#7678 = EDGE_CURVE ( 'NONE', #4138, #9123, #7740, .T. ) ; +#7679 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7680 = ADVANCED_FACE ( 'NONE', ( #4723 ), #9888, .F. ) ; +#7681 = CARTESIAN_POINT ( 'NONE', ( 2.605027572439986300, -20.31580063779101800, 9.821533196702681300 ) ) ; +#7682 = CARTESIAN_POINT ( 'NONE', ( 39.99124101795620600, -9.914758660852818700, 20.49337108212962000 ) ) ; +#7683 = CARTESIAN_POINT ( 'NONE', ( 6.701597589672347000, -30.60169844726948800, 25.95292851986573600 ) ) ; +#7684 = CARTESIAN_POINT ( 'NONE', ( 17.06460412701263600, -19.66092031882976700, 23.29585857696688600 ) ) ; +#7685 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3889, #1674, #11723 ), + ( #4989, #12832, #6117 ), + ( #13924, #7249, #625 ), + ( #8400, #1718, #9526 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -1.040834085586084300E-017, 6.134827280711685900E-005 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7941272348232409900, 1.000000000000000000), + ( 1.000000000000000000, 0.7941353932014151300, 1.000000000000000000), + ( 1.000000000000000000, 0.7941422078754276600, 1.000000000000000000), + ( 1.000000000000000000, 0.7941476793044252000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#7686 = CARTESIAN_POINT ( 'NONE', ( 33.81930897906899200, -31.27097820553719000, 16.14989117472835600 ) ) ; +#7687 = EDGE_CURVE ( 'NONE', #4014, #11201, #1800, .T. ) ; +#7688 = CARTESIAN_POINT ( 'NONE', ( 8.562113924044139100, -30.19667892010639700, 26.94830831823929200 ) ) ; +#7689 = PLANE ( 'NONE', #742 ) ; +#7690 = CARTESIAN_POINT ( 'NONE', ( 37.60238635173814000, -19.58810103526474600, 7.889489780406234100 ) ) ; +#7691 = EDGE_LOOP ( 'NONE', ( #3902, #4372, #749, #13716 ) ) ; +#7692 = CARTESIAN_POINT ( 'NONE', ( 30.16375919638943900, -30.57402470800084500, 27.49418466817813900 ) ) ; +#7693 = CARTESIAN_POINT ( 'NONE', ( 32.46386659179886200, -100.0000000000000300, -33.37087759187893000 ) ) ; +#7694 = CARTESIAN_POINT ( 'NONE', ( 8.642078695693680100, -30.41341458625749200, 27.00423065114810900 ) ) ; +#7695 = CARTESIAN_POINT ( 'NONE', ( 35.76836173979190600, -29.12129284378678000, 23.36572141332483800 ) ) ; +#7696 = AXIS2_PLACEMENT_3D ( 'NONE', #8113, #1444, #9242 ) ; +#7697 = ORIENTED_EDGE ( 'NONE', *, *, #5062, .T. ) ; +#7698 = CARTESIAN_POINT ( 'NONE', ( 4.702079135917102800, -30.19396505552815700, 24.60436731247119700 ) ) ; +#7699 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7700 = CARTESIAN_POINT ( 'NONE', ( 23.36134078821643800, -18.42909740208937900, -27.32174053855406000 ) ) ; +#7701 = CARTESIAN_POINT ( 'NONE', ( 23.20478907309389500, -33.33513594658892000, 26.50810550723551600 ) ) ; +#7702 = ORIENTED_EDGE ( 'NONE', *, *, #2544, .T. ) ; +#7703 = CARTESIAN_POINT ( 'NONE', ( -1.256439632392267500E-016, -90.07596123493894400, 16.93034213569669800 ) ) ; +#7704 = EDGE_CURVE ( 'NONE', #314, #950, #4493, .T. ) ; +#7705 = CARTESIAN_POINT ( 'NONE', ( 2.605251619297201100, -29.97767281791709200, 21.80400873246601600 ) ) ; +#7706 = CARTESIAN_POINT ( 'NONE', ( 24.45167412664824600, -17.63795530212095400, 23.65322240279083800 ) ) ; +#7707 = CARTESIAN_POINT ( 'NONE', ( 31.94858336549365100, -30.39335120907119900, 26.72630753887697400 ) ) ; +#7708 = CARTESIAN_POINT ( 'NONE', ( 38.23913580809416100, -10.01817970523796900, -19.24964851829542300 ) ) ; +#7709 = CARTESIAN_POINT ( 'NONE', ( 29.14591019424588600, -30.86411789817497800, 27.80533844562135900 ) ) ; +#7710 = ORIENTED_EDGE ( 'NONE', *, *, #7041, .F. ) ; +#7711 = CARTESIAN_POINT ( 'NONE', ( 23.53602788582840300, -9.904343869096965800, 25.81083933167186500 ) ) ; +#7712 = CARTESIAN_POINT ( 'NONE', ( 5.317762292348912300, -22.89260002555885300, 10.37745570998424900 ) ) ; +#7713 = CARTESIAN_POINT ( 'NONE', ( 15.79235733236102100, -12.49999999999999800, -13.85491266592631900 ) ) ; +#7714 = CARTESIAN_POINT ( 'NONE', ( 3.563047072445625600, -28.86559229603671300, 21.75801711190079500 ) ) ; +#7715 = ORIENTED_EDGE ( 'NONE', *, *, #4357, .F. ) ; +#7716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7717 = CARTESIAN_POINT ( 'NONE', ( 37.79832300568100600, -18.80831803665556700, -11.64589084750396200 ) ) ; +#7718 = CARTESIAN_POINT ( 'NONE', ( 10.85395448351214900, -30.86416091593712700, 27.80526268802485400 ) ) ; +#7719 = CARTESIAN_POINT ( 'NONE', ( 34.77866456399117100, -30.26714398778371200, 25.00428615806480400 ) ) ; +#7720 = VERTEX_POINT ( 'NONE', #4428 ) ; +#7721 = CARTESIAN_POINT ( 'NONE', ( 22.91307670848922500, -12.50000000000002100, 10.10633863377737800 ) ) ; +#7722 = EDGE_CURVE ( 'NONE', #6101, #5453, #4590, .T. ) ; +#7723 = CARTESIAN_POINT ( 'NONE', ( 33.84365724778044200, -30.27971329111651500, 25.63841457795134500 ) ) ; +#7724 = CARTESIAN_POINT ( 'NONE', ( 35.56191100420895200, -7.503635065054487200, 25.00000000000000700 ) ) ; +#7725 = FACE_OUTER_BOUND ( 'NONE', #5394, .T. ) ; +#7726 = CARTESIAN_POINT ( 'NONE', ( 2.883508594720422600, -20.94309296009170400, 11.29727332251521900 ) ) ; +#7727 = PLANE ( 'NONE', #8491 ) ; +#7728 = CARTESIAN_POINT ( 'NONE', ( 6.818735469938110000, -29.77979908406939600, 25.91998613855176000 ) ) ; +#7729 = CARTESIAN_POINT ( 'NONE', ( 22.49264576486651300, -27.96523496585092200, 27.45710953202296900 ) ) ; +#7730 = EDGE_LOOP ( 'NONE', ( #4426, #11753, #5727, #2061 ) ) ; +#7731 = CARTESIAN_POINT ( 'NONE', ( 36.16932926453561200, -33.35968313354784000, 11.93967752764444700 ) ) ; +#7732 = CARTESIAN_POINT ( 'NONE', ( 9.874501655988757100, -30.52977600407346900, 27.50857479137262700 ) ) ; +#7733 = CARTESIAN_POINT ( 'NONE', ( 25.03003990485839100, -19.96530868863710900, 23.02462227818016400 ) ) ; +#7734 = AXIS2_PLACEMENT_3D ( 'NONE', #11316, #1360, #9150 ) ; +#7735 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13454, #6762, #7902, #1244, #9040, #2339, #10166, #3449, #11296, #4563, #12395, #5680, #13498, #6806 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0003733143464200250100, 0.002861084446803708000, 0.004104969496995548900, 0.005348854547187391000, 0.006592739597379231400, 0.007836624647571073500, 0.01032439474795475100 ), + .UNSPECIFIED. ) ; +#7736 = CARTESIAN_POINT ( 'NONE', ( 39.26287748889491500, -10.80925001341828600, 13.51836501034793200 ) ) ; +#7737 = CARTESIAN_POINT ( 'NONE', ( 37.80160165050528300, -18.79481032053024900, 7.957212592627202600 ) ) ; +#7738 = VERTEX_POINT ( 'NONE', #12259 ) ; +#7739 = CARTESIAN_POINT ( 'NONE', ( 30.16637142130145600, -30.81451035344980100, 27.46002525043611100 ) ) ; +#7740 = CIRCLE ( 'NONE', #9281, 2.499999999999998700 ) ; +#7741 = CARTESIAN_POINT ( 'NONE', ( 34.68345617790463100, -20.28809933267076800, -14.45965940673525900 ) ) ; +#7742 = CARTESIAN_POINT ( 'NONE', ( 8.753815364011432000, -31.03573743552995300, 26.91132880135358700 ) ) ; +#7743 = CARTESIAN_POINT ( 'NONE', ( 36.32279726587152200, -30.22796977539546500, 23.36685117219195400 ) ) ; +#7744 = CARTESIAN_POINT ( 'NONE', ( 12.95093844489441500, -30.77347370972987400, 28.36765821957191100 ) ) ; +#7745 = ORIENTED_EDGE ( 'NONE', *, *, #8390, .T. ) ; +#7746 = EDGE_CURVE ( 'NONE', #13632, #8669, #7495, .T. ) ; +#7747 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669240300, 0.9848077530122092400 ) ) ; +#7748 = CARTESIAN_POINT ( 'NONE', ( 5.111093589864758300, -29.26797774905797700, 24.37184177645361400 ) ) ; +#7749 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.734723475976807100E-016 ) ) ; +#7750 = CIRCLE ( 'NONE', #13391, 3.189999999999995100 ) ; +#7751 = ADVANCED_FACE ( 'NONE', ( #7360 ), #5809, .T. ) ; +#7752 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -90.07596123493894400, 15.95758058754439400 ) ) ; +#7753 = ORIENTED_EDGE ( 'NONE', *, *, #3983, .F. ) ; +#7754 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -1.972066022637282400, 11.18414218126905600 ) ) ; +#7755 = CARTESIAN_POINT ( 'NONE', ( 9.784861605238738500, -12.66549609558534700, -25.08649169343631900 ) ) ; +#7756 = CARTESIAN_POINT ( 'NONE', ( 3.518778883104102000, -28.93157887761820400, 21.99475496125981900 ) ) ; +#7757 = LINE ( 'NONE', #4064, #7942 ) ; +#7758 = CARTESIAN_POINT ( 'NONE', ( 31.93564582097338400, -30.94141987143782700, 26.60397732398372400 ) ) ; +#7759 = DIRECTION ( 'NONE', ( 1.000000000000000000, -4.336808689942017700E-017, -7.646963822076800200E-018 ) ) ; +#7760 = CARTESIAN_POINT ( 'NONE', ( 28.93948114381280600, -30.80664873797425700, 27.88050365369236900 ) ) ; +#7761 = EDGE_LOOP ( 'NONE', ( #6758, #6006, #1659 ) ) ; +#7762 = CARTESIAN_POINT ( 'NONE', ( 39.90041424439668600, -9.900596664499719400, 10.45105727268739000 ) ) ; +#7763 = CARTESIAN_POINT ( 'NONE', ( 12.32313622926977600, -24.08049784769622200, 18.88144457692301600 ) ) ; +#7764 = CARTESIAN_POINT ( 'NONE', ( 7.990953870774587700, -21.37353902485359200, -20.04775260434051300 ) ) ; +#7765 = CARTESIAN_POINT ( 'NONE', ( 1.646693298759388300, -10.13145910719494200, -18.98029328923496100 ) ) ; +#7766 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -20.68999999999999400 ) ) ; +#7767 = CARTESIAN_POINT ( 'NONE', ( 4.173873741923931600, -30.87200403969381000, 22.84998354793455300 ) ) ; +#7768 = FACE_OUTER_BOUND ( 'NONE', #9043, .T. ) ; +#7769 = ORIENTED_EDGE ( 'NONE', *, *, #7678, .T. ) ; +#7770 = CARTESIAN_POINT ( 'NONE', ( 37.49376965687356700, -27.59971085080089600, 9.240444581331406200 ) ) ; +#7771 = ADVANCED_FACE ( 'NONE', ( #7725 ), #11437, .F. ) ; +#7772 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -39.52045731841471400, 19.79474689191102500 ) ) ; +#7773 = CARTESIAN_POINT ( 'NONE', ( 34.46302891045424800, -31.11993639771074500, 24.50532819797893000 ) ) ; +#7774 = CARTESIAN_POINT ( 'NONE', ( 26.42087243457300600, -24.14856963616710000, 19.36474647873381000 ) ) ; +#7775 = CARTESIAN_POINT ( 'NONE', ( 33.68958837905816500, -31.11604147225596500, 25.27766767319362300 ) ) ; +#7776 = CARTESIAN_POINT ( 'NONE', ( 3.196790491955253400, -18.92698109594548900, 13.37902201711274100 ) ) ; +#7777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7778 = CARTESIAN_POINT ( 'NONE', ( 6.928086361623596400, -30.88044910685644600, 25.95826477080078100 ) ) ; +#7779 = CARTESIAN_POINT ( 'NONE', ( -9.575292510507216400E-014, -9.999999999999904100, -16.35192870041849400 ) ) ; +#7780 = CIRCLE ( 'NONE', #13490, 2.500000000000000000 ) ; +#7781 = ORIENTED_EDGE ( 'NONE', *, *, #2454, .T. ) ; +#7782 = AXIS2_PLACEMENT_3D ( 'NONE', #3851, #11693, #4956 ) ; +#7783 = CARTESIAN_POINT ( 'NONE', ( 37.47598904628010500, -28.03812380488132700, 11.36115117535580200 ) ) ; +#7784 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4784, #12614, #13721, #7039, #421, #8188, #1521, #9311, #2607, #10433, #3722, #11563, #4826, #12667, #5958, #13765, #7086 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 2, 4 ), + ( -5.999999999967890300E-008, 0.0004466457995899572000, 0.0008933515991799141500, 0.001786763198359827900, 0.003573586396719665900, 0.007147232793439342800, 0.008934055991799182500, 0.01072087919015902000, 0.01429452558687870100 ), + .UNSPECIFIED. ) ; +#7785 = CARTESIAN_POINT ( 'NONE', ( 27.63283489954605400, -9.999999999999992900, 25.00000000000000400 ) ) ; +#7786 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -7.549039028647404100, 19.10345906471268100 ) ) ; +#7787 = CARTESIAN_POINT ( 'NONE', ( 37.49916684631102000, -21.21781134013015800, 7.951179977183949500 ) ) ; +#7788 = VERTEX_POINT ( 'NONE', #6715 ) ; +#7789 = CARTESIAN_POINT ( 'NONE', ( 29.75897296171531900, -30.61551897873651000, 27.63791555660861500 ) ) ; +#7790 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -16.29999999999998300 ) ) ; +#7791 = CARTESIAN_POINT ( 'NONE', ( 8.732058529070664900, -30.59903071973671000, 27.03677789935920500 ) ) ; +#7792 = CARTESIAN_POINT ( 'NONE', ( 35.51729016850410400, -29.11431307556967200, 23.61008501404083000 ) ) ; +#7793 = EDGE_CURVE ( 'NONE', #2517, #1424, #13311, .T. ) ; +#7794 = VECTOR ( 'NONE', #7361, 1000.000000000000000 ) ; +#7795 = CARTESIAN_POINT ( 'NONE', ( 31.84766618108735200, -20.62124696407085300, 19.81701057545322800 ) ) ; +#7796 = CARTESIAN_POINT ( 'NONE', ( 5.059676961932159300, -30.48151685857437700, 24.80516753857451600 ) ) ; +#7797 = CARTESIAN_POINT ( 'NONE', ( 3.043001653600657400, -10.00000000000000000, -24.20601281109635400 ) ) ; +#7798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7799 = CARTESIAN_POINT ( 'NONE', ( 10.52445646983252600, -32.71693464954875500, 25.39583836229378700 ) ) ; +#7800 = ORIENTED_EDGE ( 'NONE', *, *, #3563, .F. ) ; +#7801 = CARTESIAN_POINT ( 'NONE', ( 38.29969396625853100, -10.08116930238260700, -19.10870469426860700 ) ) ; +#7802 = CARTESIAN_POINT ( 'NONE', ( 3.079587299104551000, -30.37109752740623100, 21.79156022200764700 ) ) ; +#7803 = CARTESIAN_POINT ( 'NONE', ( 30.44559162597421700, -19.75406399241057200, -24.79721173208464800 ) ) ; +#7804 = CARTESIAN_POINT ( 'NONE', ( 31.63564097774187900, -30.22496420279461300, 26.86098521776177300 ) ) ; +#7805 = CARTESIAN_POINT ( 'NONE', ( 0.6938385207481156900, -10.85185360449558600, 13.24586016328905900 ) ) ; +#7806 = CARTESIAN_POINT ( 'NONE', ( 28.93991629844256200, -30.83892483103203800, 27.87459235387725800 ) ) ; +#7807 = CARTESIAN_POINT ( 'NONE', ( 36.47077888136059400, -28.89030954339044000, 21.82181841853744300 ) ) ; +#7808 = CARTESIAN_POINT ( 'NONE', ( 36.06078499381724400, -10.00000000000000000, 19.30358805593481000 ) ) ; +#7809 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#7810 = CARTESIAN_POINT ( 'NONE', ( 7.867570856150279300, -12.49999999999999600, -18.43473142924339600 ) ) ; +#7811 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -9.012990968822395000, 13.25807482226018600 ) ) ; +#7812 = EDGE_CURVE ( 'NONE', #11497, #13932, #8824, .T. ) ; +#7813 = CARTESIAN_POINT ( 'NONE', ( 3.447510769758873800, -30.03960888385101000, 23.15378806398993900 ) ) ; +#7814 = EDGE_LOOP ( 'NONE', ( #1343, #5078, #2310 ) ) ; +#7815 = CARTESIAN_POINT ( 'NONE', ( 1.926454793682535100, -9.902013067902123200, 16.25689119610126100 ) ) ; +#7816 = CARTESIAN_POINT ( 'NONE', ( 1.490646319765204000, -11.79018112574127600, -17.55345234838140600 ) ) ; +#7817 = CARTESIAN_POINT ( 'NONE', ( 34.37026039190964600, -30.05321848764821600, 25.26506042196745500 ) ) ; +#7818 = CARTESIAN_POINT ( 'NONE', ( 27.93253174419279000, -12.50000000000003900, 20.82204556084309700 ) ) ; +#7819 = CARTESIAN_POINT ( 'NONE', ( 33.60882187912065400, -29.98475267832299100, 25.73935494019342200 ) ) ; +#7820 = MECHANICAL_CONTEXT ( 'NONE', #6679, 'mechanical' ) ; +#7821 = CARTESIAN_POINT ( 'NONE', ( 4.380078412178008300, -19.51134093398762600, 15.63736640727135100 ) ) ; +#7822 = CARTESIAN_POINT ( 'NONE', ( 11.19760447847464000, -95.07596123493893000, 15.99912156243136600 ) ) ; +#7823 = CARTESIAN_POINT ( 'NONE', ( 36.92600577953412300, -31.35582386502765200, 10.19854342268434500 ) ) ; +#7824 = CARTESIAN_POINT ( 'NONE', ( 6.928086560820482900, -30.09888838412403800, 26.09608920729518600 ) ) ; +#7825 = VECTOR ( 'NONE', #13626, 1000.000000000000000 ) ; +#7826 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#7827 = CARTESIAN_POINT ( 'NONE', ( 17.44205019309341500, -33.35025653084936400, 26.50741664928542500 ) ) ; +#7828 = CARTESIAN_POINT ( 'NONE', ( 31.94962244991852200, -100.0000000000000100, -34.01313420148404300 ) ) ; +#7829 = ORIENTED_EDGE ( 'NONE', *, *, #5919, .F. ) ; +#7830 = EDGE_CURVE ( 'NONE', #3367, #2778, #6392, .T. ) ; +#7831 = CARTESIAN_POINT ( 'NONE', ( 16.52588349782472900, -19.00051484900028600, 23.41296639185413800 ) ) ; +#7832 = CARTESIAN_POINT ( 'NONE', ( 37.50047076805537900, -20.40137435114973400, 7.978586430421003700 ) ) ; +#7833 = CARTESIAN_POINT ( 'NONE', ( 29.75990299069240300, -30.77649684359807500, 27.61743842807365100 ) ) ; +#7834 = CARTESIAN_POINT ( 'NONE', ( -1.163823269527408700E-015, 9.723972447247824400, -1.698850734653958100 ) ) ; +#7835 = CARTESIAN_POINT ( 'NONE', ( 8.950898451827402600, -31.04650580365473200, 27.00085101516836200 ) ) ; +#7836 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4132, #6375, #9781, #3076 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.008997891789929437000 ), + .UNSPECIFIED. ) ; +#7837 = CARTESIAN_POINT ( 'NONE', ( 36.07166641737818200, -29.99235499876298400, 23.77568190315313100 ) ) ; +#7838 = CIRCLE ( 'NONE', #472, 10.00000000000000000 ) ; +#7839 = ADVANCED_FACE ( 'NONE', ( #1455 ), #13714, .F. ) ; +#7840 = CARTESIAN_POINT ( 'NONE', ( 37.39737095817733300, -25.84486553748240900, 8.790903943726810600 ) ) ; +#7841 = LOCAL_TIME ( 15, 9, 47.00000000000000000, #8004 ) ; +#7842 = CARTESIAN_POINT ( 'NONE', ( 5.301810788274486300, -29.48549247066248600, 24.72597756096672200 ) ) ; +#7843 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7844 = VERTEX_POINT ( 'NONE', #9037 ) ; +#7845 = CARTESIAN_POINT ( 'NONE', ( 32.15692886771702800, -95.07596123493894400, 14.66484592971129800 ) ) ; +#7846 = CARTESIAN_POINT ( 'NONE', ( 17.57427704109925100, -33.35320608433636400, 26.50719968128653300 ) ) ; +#7847 = CARTESIAN_POINT ( 'NONE', ( 3.079559328023420600, -29.15213649898967300, 22.00494221374738800 ) ) ; +#7848 = CARTESIAN_POINT ( 'NONE', ( 27.28306756327847500, -97.50579355475495900, 21.65447030009107000 ) ) ; +#7849 = CARTESIAN_POINT ( 'NONE', ( 31.66090684866225400, -30.73112572889888100, 26.82501837086138300 ) ) ; +#7850 = CARTESIAN_POINT ( 'NONE', ( 33.44061454675446000, -10.41105462914586800, -24.99999999999999300 ) ) ; +#7851 = CARTESIAN_POINT ( 'NONE', ( 28.83700977286808600, -30.81024125483578400, 27.91070596547131900 ) ) ; +#7852 = CARTESIAN_POINT ( 'NONE', ( 37.48437607943301900, -29.83908441783763300, 21.65520368613460900 ) ) ; +#7853 = CARTESIAN_POINT ( 'NONE', ( 15.25146207844213100, -12.49999999999999800, -13.09993692689585400 ) ) ; +#7854 = CARTESIAN_POINT ( 'NONE', ( 15.06778665326436200, -12.50000000000002000, 8.160639749483252100 ) ) ; +#7855 = ORIENTED_EDGE ( 'NONE', *, *, #8653, .T. ) ; +#7856 = CARTESIAN_POINT ( 'NONE', ( 4.172401576339944500, -29.04449192074887500, 23.17211512068118000 ) ) ; +#7857 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9743, #3185, #4142, #11981 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004625614886216256700 ), + .UNSPECIFIED. ) ; +#7858 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, -10.00000000000000200, 8.005331014629295100 ) ) ; +#7859 = EDGE_LOOP ( 'NONE', ( #1478, #4229, #12396, #9156, #4410, #1612, #4530, #6354, #9342 ) ) ; +#7860 = AXIS2_PLACEMENT_3D ( 'NONE', #6907, #8052, #1390 ) ; +#7861 = CARTESIAN_POINT ( 'NONE', ( 31.73490860439989100, -21.32999876187589200, -20.35593154811602900 ) ) ; +#7862 = CARTESIAN_POINT ( 'NONE', ( 7.975354531099423400, -37.55511539838412500, 16.68922105577452800 ) ) ; +#7863 = CARTESIAN_POINT ( 'NONE', ( 34.23930336327532600, -30.98308720987354900, 24.94263204542717800 ) ) ; +#7864 = CARTESIAN_POINT ( 'NONE', ( 23.60061851081237400, -12.50000000000002700, 9.878463139956526400 ) ) ; +#7865 = CARTESIAN_POINT ( 'NONE', ( 33.60883090734036900, -30.86562877173131600, 25.58404278077010500 ) ) ; +#7866 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#7867 = ORIENTED_EDGE ( 'NONE', *, *, #12189, .F. ) ; +#7868 = CARTESIAN_POINT ( 'NONE', ( 5.575659441033210800, -19.97119886630120400, 17.26509120810563400 ) ) ; +#7869 = DIRECTION ( 'NONE', ( -1.387778780781445500E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7870 = CARTESIAN_POINT ( 'NONE', ( 32.02456195666776000, -37.55515651460507300, 16.68928315768979700 ) ) ; +#7871 = CARTESIAN_POINT ( 'NONE', ( 7.081751451699211100, -31.11681146440845700, 25.87829161691850600 ) ) ; +#7872 = CARTESIAN_POINT ( 'NONE', ( 33.75470228449974300, -100.0000000000000100, -0.4996131600212491700 ) ) ; +#7873 = CARTESIAN_POINT ( 'NONE', ( 3.536473075320455600, -93.73150942637403200, 4.754781575989041700 ) ) ; +#7874 = EDGE_CURVE ( 'NONE', #8131, #11471, #5020, .T. ) ; +#7875 = CARTESIAN_POINT ( 'NONE', ( 10.86523482762277300, -30.77559965646360500, 27.83663713985248100 ) ) ; +#7876 = CARTESIAN_POINT ( 'NONE', ( 9.831330374788791500, -12.37902490439008800, -25.07898844570639700 ) ) ; +#7877 = EDGE_LOOP ( 'NONE', ( #7528, #4728, #1971, #10332 ) ) ; +#7878 = CARTESIAN_POINT ( 'NONE', ( 37.60127100276017100, -19.58491550755045600, 8.127607965907792200 ) ) ; +#7879 = CARTESIAN_POINT ( 'NONE', ( 29.75896961527059400, -30.92250846894434700, 27.58376209400213600 ) ) ; +#7880 = CARTESIAN_POINT ( 'NONE', ( 2.543683556551882500, -28.01126083081645000, 13.03094497274359800 ) ) ; +#7881 = CARTESIAN_POINT ( 'NONE', ( 8.929900042074084600, -30.71177701365588000, 27.10783310458648600 ) ) ; +#7882 = CARTESIAN_POINT ( 'NONE', ( 35.53887498343002000, -30.93850194346302000, 23.30151703505556400 ) ) ; +#7883 = VERTEX_POINT ( 'NONE', #12663 ) ; +#7884 = AXIS2_PLACEMENT_3D ( 'NONE', #5999, #13802, #7123 ) ; +#7885 = CARTESIAN_POINT ( 'NONE', ( 11.26586904079728800, -30.82654731345162700, 27.93780948131385200 ) ) ; +#7886 = CARTESIAN_POINT ( 'NONE', ( 4.606273918501031500, -10.01537258320351000, -24.99999999999999600 ) ) ; +#7887 = CARTESIAN_POINT ( 'NONE', ( 5.377341566726788500, -30.86011533531979700, 24.73037038265722400 ) ) ; +#7888 = ORIENTED_EDGE ( 'NONE', *, *, #2394, .T. ) ; +#7889 = CARTESIAN_POINT ( 'NONE', ( 9.307359174008611900, -11.99261116098765400, -24.99999999999999600 ) ) ; +#7890 = EDGE_CURVE ( 'NONE', #12439, #11471, #10905, .T. ) ; +#7891 = CARTESIAN_POINT ( 'NONE', ( 3.592743798168722700, -30.62577346174230900, 21.91917470509182000 ) ) ; +#7892 = DIRECTION ( 'NONE', ( -6.833476513896989600E-016, -0.1736481776669238900, 0.9848077530122092400 ) ) ; +#7893 = VERTEX_POINT ( 'NONE', #416 ) ; +#7894 = CARTESIAN_POINT ( 'NONE', ( 31.53037242054725200, -30.17251239250132900, 26.90184010609050700 ) ) ; +#7895 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -99.99999999999998600, -40.86942826376123600 ) ) ; +#7896 = CARTESIAN_POINT ( 'NONE', ( 28.83678577328690900, -30.82600370633656400, 27.90799186450650600 ) ) ; +#7897 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12322, #11218, #4487, #5597, #13427, #6734, #138, #7872, #1222, #9012, #2309, #10136, #3422, #11265, #4534, #12364, #5648, #13468, #6778, #181, #7920, #1261, #9055, #2356 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.1250000000000001700, 0.1875000000000003100, 0.2500000000000004400, 0.3750000000000003900, 0.4375000000000000600, 0.4999999999999997800, 0.6249999999999997800, 0.6874999999999997800, 0.7499999999999998900, 0.8749999999999998900, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#7898 = CARTESIAN_POINT ( 'NONE', ( 36.43967273827139800, -30.56624305959170600, 21.52628734393530500 ) ) ; +#7899 = CARTESIAN_POINT ( 'NONE', ( 5.957347874845453400, -21.83529011127061600, -16.74186734339382800 ) ) ; +#7900 = CARTESIAN_POINT ( 'NONE', ( 5.568024404868198800, -23.01611308931925500, 11.26803206585318100 ) ) ; +#7901 = ORIENTED_EDGE ( 'NONE', *, *, #6514, .F. ) ; +#7902 = CARTESIAN_POINT ( 'NONE', ( 3.024488690469810500, -12.03057736326098500, -20.52139649692646700 ) ) ; +#7903 = AXIS2_PLACEMENT_3D ( 'NONE', #14342, #9904, #7679 ) ; +#7904 = LINE ( 'NONE', #6180, #7794 ) ; +#7905 = CARTESIAN_POINT ( 'NONE', ( 3.759393338301688200, -30.39872814266114900, 23.31017617003205800 ) ) ; +#7906 = CARTESIAN_POINT ( 'NONE', ( 12.90274200893057000, -10.00000000000000400, 25.19460466258189900 ) ) ; +#7907 = ADVANCED_FACE ( 'NONE', ( #13634 ), #787, .T. ) ; +#7908 = ORIENTED_EDGE ( 'NONE', *, *, #5156, .T. ) ; +#7909 = CARTESIAN_POINT ( 'NONE', ( 29.73496065651569600, -12.49999999999983800, -20.63939022024090900 ) ) ; +#7910 = CARTESIAN_POINT ( 'NONE', ( 3.073946661098878200, -31.35565798631368000, 10.19840438910379100 ) ) ; +#7911 = CARTESIAN_POINT ( 'NONE', ( 34.07206555650706300, -29.69311815340887500, 25.31297881603057200 ) ) ; +#7912 = CARTESIAN_POINT ( 'NONE', ( 28.42413368959039800, -24.02804691292522700, 18.50583033354836400 ) ) ; +#7913 = EDGE_CURVE ( 'NONE', #5453, #8761, #10713, .T. ) ; +#7914 = CARTESIAN_POINT ( 'NONE', ( 33.43837279372204600, -29.71130721219949300, 25.73148398866095800 ) ) ; +#7915 = EDGE_LOOP ( 'NONE', ( #8907, #11346, #8041, #10878 ) ) ; +#7916 = CARTESIAN_POINT ( 'NONE', ( 6.583359680779264700, -20.35262681910271700, 18.40113158314802900 ) ) ; +#7917 = DIRECTION ( 'NONE', ( -0.9014945988743691100, 0.0000000000000000000, 0.4327903513253737500 ) ) ; +#7918 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998600, -12.50000000000000400, -11.97268808056939400 ) ) ; +#7919 = CARTESIAN_POINT ( 'NONE', ( 6.981303276213696000, -30.39678451159898000, 26.16401548665660600 ) ) ; +#7920 = CARTESIAN_POINT ( 'NONE', ( 25.78987907430276700, -100.0000000000000100, 6.210915839114816700 ) ) ; +#7921 = CARTESIAN_POINT ( 'NONE', ( 5.103654636369789400, -31.44078814996637000, 24.97476238694612500 ) ) ; +#7922 = CARTESIAN_POINT ( 'NONE', ( 11.18300417806105300, -10.27171160560986300, -25.03304473620536200 ) ) ; +#7923 = CARTESIAN_POINT ( 'NONE', ( 37.78924204816819800, -18.80662190935389300, 8.470390059778248200 ) ) ; +#7924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#7925 = CARTESIAN_POINT ( 'NONE', ( 8.949866728981474400, -30.30980835255811500, 27.13310921918507300 ) ) ; +#7926 = CARTESIAN_POINT ( 'NONE', ( 35.86070632693840600, -29.66904673135382000, 23.87141505855943900 ) ) ; +#7927 = FACE_OUTER_BOUND ( 'NONE', #590, .T. ) ; +#7928 = ORIENTED_EDGE ( 'NONE', *, *, #8956, .T. ) ; +#7929 = CARTESIAN_POINT ( 'NONE', ( 28.93306843338259100, -30.83156845459665600, 27.89948320508578700 ) ) ; +#7930 = FACE_OUTER_BOUND ( 'NONE', #2615, .T. ) ; +#7931 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9220, #2519, #13680 ), + ( #6989, #379, #8140 ), + ( #1474, #9268, #2568 ), + ( #10385, #3675, #11522 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -2.211772431870429000E-017, 0.004071613820681697900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7936328294987457000, 1.000000000000000000), + ( 1.000000000000000000, 0.7939219499256244800, 1.000000000000000000), + ( 1.000000000000000000, 0.7940534625034709700, 1.000000000000000000), + ( 1.000000000000000000, 0.7941272348423917800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#7932 = EDGE_CURVE ( 'NONE', #1086, #3673, #350, .T. ) ; +#7933 = PRODUCT ( 'Handle', 'Handle', '', ( #7820 ) ) ; +#7934 = CARTESIAN_POINT ( 'NONE', ( 23.81226500534894800, -19.06952861416541700, 23.38396538113585200 ) ) ; +#7935 = CARTESIAN_POINT ( 'NONE', ( 5.291771156861543100, -29.92014073013321600, 24.99033662879597300 ) ) ; +#7936 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, 1.368992230496410200, -7.763940748012489100 ) ) ; +#7937 = VERTEX_POINT ( 'NONE', #7082 ) ; +#7938 = CARTESIAN_POINT ( 'NONE', ( 5.957627972630337600, -12.49999999999926800, 14.49359774345817800 ) ) ; +#7939 = CARTESIAN_POINT ( 'NONE', ( 0.4734153224019237400, -11.89366128960763500, 8.005331014629295100 ) ) ; +#7940 = CARTESIAN_POINT ( 'NONE', ( 36.73457053029820700, -28.80181609352307200, 24.07040313373831400 ) ) ; +#7941 = CARTESIAN_POINT ( 'NONE', ( 2.693195723025116500, -29.55943827637341300, 22.08419715714215000 ) ) ; +#7942 = VECTOR ( 'NONE', #11901, 1000.000000000000000 ) ; +#7943 = CARTESIAN_POINT ( 'NONE', ( 22.35960462362332300, -27.96255689439415100, 27.45771657700753500 ) ) ; +#7944 = ORIENTED_EDGE ( 'NONE', *, *, #2500, .T. ) ; +#7945 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999591400, -97.04517183358908000, 16.23828164244108800 ) ) ; +#7946 = CARTESIAN_POINT ( 'NONE', ( 31.56426729655138900, -30.62301142002951300, 26.89517242521707600 ) ) ; +#7947 = DIRECTION ( 'NONE', ( -0.9997116207813338000, -0.02364923651029158700, -0.004169998469922192600 ) ) ; +#7948 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650500, -30.82655086342984100, 27.93782961424065500 ) ) ; +#7949 = CARTESIAN_POINT ( 'NONE', ( 37.42350158410999900, -29.50956310642824600, 21.77666617537054000 ) ) ; +#7950 = CARTESIAN_POINT ( 'NONE', ( 29.60568929224747900, -28.69763550242385700, 27.91122426119777000 ) ) ; +#7951 = CARTESIAN_POINT ( 'NONE', ( 5.165867950766830100, -12.49999999999960600, 12.05248782362348300 ) ) ; +#7952 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7953 = ORIENTED_EDGE ( 'NONE', *, *, #2902, .T. ) ; +#7954 = CARTESIAN_POINT ( 'NONE', ( 4.099478178208954700, -29.23878754923610000, 23.39393860259028900 ) ) ; +#7955 = EDGE_CURVE ( 'NONE', #9622, #9327, #8990, .T. ) ; +#7956 = FACE_OUTER_BOUND ( 'NONE', #4154, .T. ) ; +#7957 = CARTESIAN_POINT ( 'NONE', ( 6.561018263311311200, -19.70146691064716600, 18.53219877583955700 ) ) ; +#7958 = CARTESIAN_POINT ( 'NONE', ( 24.02210102840646000, -12.49999999999999800, -14.01700069159906700 ) ) ; +#7959 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#7960 = CARTESIAN_POINT ( 'NONE', ( 34.18834866314977500, -30.65406122879373600, 25.29107857849460200 ) ) ; +#7961 = CARTESIAN_POINT ( 'NONE', ( 29.77532167046104300, -12.49999999999956700, 19.73722998358652700 ) ) ; +#7962 = CARTESIAN_POINT ( 'NONE', ( 33.57191888266843400, -30.57788920681683500, 25.77357181578549500 ) ) ; +#7963 = ORIENTED_EDGE ( 'NONE', *, *, #11547, .F. ) ; +#7964 = CARTESIAN_POINT ( 'NONE', ( 10.85519866642235500, -30.80770810984035500, 27.81665270839133100 ) ) ; +#7965 = CARTESIAN_POINT ( 'NONE', ( 9.125114930031870100, -19.11772508897683700, 20.86687573723369500 ) ) ; +#7966 = CARTESIAN_POINT ( 'NONE', ( 34.76760509939772000, -22.16762928006625100, -14.35769130181214600 ) ) ; +#7967 = CARTESIAN_POINT ( 'NONE', ( 7.361105072722078400, -31.15644970619691300, 26.03875529670953200 ) ) ; +#7968 = AXIS2_PLACEMENT_3D ( 'NONE', #10472, #3759, #11599 ) ; +#7969 = CARTESIAN_POINT ( 'NONE', ( 3.481500971865553000, -30.51255251419738100, 21.40184962804404700 ) ) ; +#7970 = CARTESIAN_POINT ( 'NONE', ( 4.360801294260991100, -11.88103378220526500, 19.03335776249980800 ) ) ; +#7971 = CARTESIAN_POINT ( 'NONE', ( 37.42792692223657300, -21.10705188348764200, 9.301456656177874600 ) ) ; +#7972 = CARTESIAN_POINT ( 'NONE', ( 15.08857785834738500, -16.73815471869652800, 23.81188152290579300 ) ) ; +#7973 = CARTESIAN_POINT ( 'NONE', ( 9.032330173303963200, -30.83063437413344600, 27.12331130937948500 ) ) ; +#7974 = CARTESIAN_POINT ( 'NONE', ( 35.71468954425132100, -30.72247288474577700, 23.59001527252238300 ) ) ; +#7975 = ORIENTED_EDGE ( 'NONE', *, *, #74, .T. ) ; +#7976 = CARTESIAN_POINT ( 'NONE', ( 33.61397669367848100, -29.14339071342216100, 26.16675705284642800 ) ) ; +#7977 = EDGE_CURVE ( 'NONE', #1982, #12041, #10503, .T. ) ; +#7978 = CARTESIAN_POINT ( 'NONE', ( 24.46012418709886300, -18.02731847907817900, 23.58456716939511500 ) ) ; +#7979 = CARTESIAN_POINT ( 'NONE', ( 5.837375788976787700, -31.12707319228523100, 24.82198585503253000 ) ) ; +#7980 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#7981 = CARTESIAN_POINT ( 'NONE', ( 15.43334289338373100, -12.49999999999998600, 9.014475253991340900 ) ) ; +#7982 = CARTESIAN_POINT ( 'NONE', ( 0.4206261898548300800, -11.68250475941924900, 8.578584215412769600 ) ) ; +#7983 = CARTESIAN_POINT ( 'NONE', ( 33.73637424073053400, -31.77373426678945400, 25.63808206869899200 ) ) ; +#7984 = CC_DESIGN_APPROVAL ( #8007, ( #46 ) ) ; +#7985 = CARTESIAN_POINT ( 'NONE', ( 3.718694079496021500, -30.68478251634949300, 22.01585921281000000 ) ) ; +#7986 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438938600, 7.000000000000000000, -20.68999999999999400 ) ) ; +#7987 = CARTESIAN_POINT ( 'NONE', ( 12.46848886831333100, -31.29892962639993600, 28.17819754820188300 ) ) ; +#7988 = CARTESIAN_POINT ( 'NONE', ( 31.53046489625850100, -31.08616127296966500, 26.74094286885228300 ) ) ; +#7989 = CARTESIAN_POINT ( 'NONE', ( 28.82332897180226900, -9.851496151717146400, -25.00000000000000000 ) ) ; +#7990 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#7991 = CARTESIAN_POINT ( 'NONE', ( 36.51159067008833900, -30.54745919802766400, 21.59230638823767000 ) ) ; +#7992 = CARTESIAN_POINT ( 'NONE', ( 3.584989113100454500, -29.21182598394896600, 22.78233661354267200 ) ) ; +#7993 = CARTESIAN_POINT ( 'NONE', ( 31.19042542073231800, -20.50594109313635400, 20.33279768225170200 ) ) ; +#7994 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #151, #11278, #192 ), + ( #7934, #1272, #9069 ), + ( #2369, #10196, #3477 ), + ( #11324, #4592, #12422 ), + ( #5708, #13526, #6834 ), + ( #227, #7978, #1315 ), + ( #9112, #2408, #10239 ), + ( #3523, #11367, #4638 ), + ( #12473, #5758, #13566 ), + ( #6885, #278, #8026 ), + ( #1368, #9160, #2455 ), + ( #10280, #3574, #11412 ), + ( #4681, #12524, #5810 ), + ( #13615, #6932, #325 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -6.819631664933822900E-017, 0.0005065908857741963000, 0.001013181771548460900, 0.002026363543096989900, 0.004052727086194048300, 0.006079090629291105900, 0.008105454172388164300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9985249960690032500, 1.000000000000000000), + ( 1.000000000000000000, 0.9983407160272792500, 1.000000000000000000), + ( 1.000000000000000000, 0.9981455107269920900, 1.000000000000000000), + ( 1.000000000000000000, 0.9977442486366425700, 1.000000000000000000), + ( 1.000000000000000000, 0.9975381178630821100, 1.000000000000000000), + ( 1.000000000000000000, 0.9969111317229590900, 1.000000000000000000), + ( 1.000000000000000000, 0.9964828266658626300, 1.000000000000000000), + ( 1.000000000000000000, 0.9951974737514407400, 1.000000000000000000), + ( 1.000000000000000000, 0.9943366470398211600, 1.000000000000000000), + ( 1.000000000000000000, 0.9926633665243533900, 1.000000000000000000), + ( 1.000000000000000000, 0.9918469725555091300, 1.000000000000000000), + ( 1.000000000000000000, 0.9902578702719467800, 1.000000000000000000), + ( 1.000000000000000000, 0.9894849509893921500, 1.000000000000000000), + ( 1.000000000000000000, 0.9887332271578432900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#7995 = CARTESIAN_POINT ( 'NONE', ( 15.25099192888920100, -12.50000000000005300, 8.690557437730889800 ) ) ; +#7996 = CARTESIAN_POINT ( 'NONE', ( 3.954779519694221300, -30.79587550838858700, 22.48806932535300600 ) ) ; +#7997 = EDGE_CURVE ( 'NONE', #12609, #11497, #5455, .T. ) ; +#7998 = CARTESIAN_POINT ( 'NONE', ( 4.305112279983088500, -30.80410359248684000, 23.41846800766935000 ) ) ; +#7999 = CARTESIAN_POINT ( 'NONE', ( 15.96144081452122900, -12.49999999999999800, -14.01093577272590300 ) ) ; +#8000 = FACE_OUTER_BOUND ( 'NONE', #4866, .T. ) ; +#8001 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, -19.74219049453679300 ) ) ; +#8002 = CARTESIAN_POINT ( 'NONE', ( 29.41907398323403900, -21.05519900919809500, -22.32107927003781000 ) ) ; +#8003 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57596123371020300, 12.92977595461169600 ) ) ; +#8004 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#8005 = CARTESIAN_POINT ( 'NONE', ( 33.75007253421095000, -29.56454599155824400, 25.45032706569333700 ) ) ; +#8006 = ORIENTED_EDGE ( 'NONE', *, *, #3451, .T. ) ; +#8007 = APPROVAL ( #12318, 'UNSPECIFIED' ) ; +#8008 = CARTESIAN_POINT ( 'NONE', ( 23.86803204541453400, -12.49999999999998200, 9.721425942077281900 ) ) ; +#8009 = CARTESIAN_POINT ( 'NONE', ( 33.24933749414834900, -29.69809979621938800, 25.84074808783268700 ) ) ; +#8010 = CARTESIAN_POINT ( 'NONE', ( 10.85395767264768300, -30.74595097899737800, 27.82611037106326900 ) ) ; +#8011 = CARTESIAN_POINT ( 'NONE', ( 10.47363094279979200, -19.45394133981039500, 21.57702247049321900 ) ) ; +#8012 = CARTESIAN_POINT ( 'NONE', ( 34.39544705305561900, -12.50000000000037500, -14.46079630305274800 ) ) ; +#8013 = CARTESIAN_POINT ( 'NONE', ( 7.263440188694785200, -30.59320262643142700, 26.30043981197219700 ) ) ; +#8014 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, -22.55310831142053400, 7.949436975552254500 ) ) ; +#8015 = FACE_OUTER_BOUND ( 'NONE', #10908, .T. ) ; +#8016 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -9.897419301475807200E-015, 25.00105000000004200 ) ) ; +#8017 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -94.74682992296695300, 18.71443453778785600 ) ) ; +#8018 = EDGE_CURVE ( 'NONE', #12451, #3860, #3216, .T. ) ; +#8019 = CARTESIAN_POINT ( 'NONE', ( 37.23338191171938400, -20.26983422722314300, 10.81890287474018600 ) ) ; +#8020 = ORIENTED_EDGE ( 'NONE', *, *, #6295, .T. ) ; +#8021 = CARTESIAN_POINT ( 'NONE', ( 37.57707328070952000, -10.00094723518768800, 20.29284242110361800 ) ) ; +#8022 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, -22.49999999999999600 ) ) ; +#8023 = CARTESIAN_POINT ( 'NONE', ( 9.037343875026136800, -30.45580984281227500, 27.17792574674642500 ) ) ; +#8024 = CARTESIAN_POINT ( 'NONE', ( 35.43833935543790400, -29.30433341093086600, 23.93350215237328300 ) ) ; +#8025 = CARTESIAN_POINT ( 'NONE', ( 35.81905270228156700, -28.72585923428254200, 22.38489301700769100 ) ) ; +#8026 = CARTESIAN_POINT ( 'NONE', ( 25.66085077171260000, -14.87378540762644800, 24.14062013445228800 ) ) ; +#8027 = CARTESIAN_POINT ( 'NONE', ( 5.594945410131580300, -30.27612287013328900, 25.26544152122885100 ) ) ; +#8028 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8029 = CARTESIAN_POINT ( 'NONE', ( 7.596474012201786900, -23.55774211802914300, 15.14911735474233700 ) ) ; +#8030 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -22.50000000000000700, -11.97268808056957200 ) ) ; +#8031 = CARTESIAN_POINT ( 'NONE', ( 28.84047289928198400, -32.83351587922643200, 25.62623517288847500 ) ) ; +#8032 = CARTESIAN_POINT ( 'NONE', ( 11.49976219906756600, -11.20635047079503700, 24.48259622481201300 ) ) ; +#8033 = ORIENTED_EDGE ( 'NONE', *, *, #2775, .T. ) ; +#8034 = CARTESIAN_POINT ( 'NONE', ( 2.705232288872433200, -29.92653540701578800, 22.13255326292114600 ) ) ; +#8035 = CARTESIAN_POINT ( 'NONE', ( 17.39693543307840800, -19.87568216611863300, 23.25829123793066700 ) ) ; +#8036 = CARTESIAN_POINT ( 'NONE', ( 31.36400801771087300, -30.51861884896936400, 26.99996476891033500 ) ) ; +#8037 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#8038 = CARTESIAN_POINT ( 'NONE', ( 36.93927163938949600, -29.14550163502463000, 21.95366769303126000 ) ) ; +#8039 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #3318, 'distance_accuracy_value', 'NONE'); +#8040 = CARTESIAN_POINT ( 'NONE', ( 13.05846279649622800, -22.03500000000001400, 19.55444387833760100 ) ) ; +#8041 = ORIENTED_EDGE ( 'NONE', *, *, #11839, .F. ) ; +#8042 = CARTESIAN_POINT ( 'NONE', ( 31.61831076735303700, -26.96718508933873400, 18.94512813495854400 ) ) ; +#8043 = CARTESIAN_POINT ( 'NONE', ( 17.13651576850661900, -19.58903669819531100, 23.30919411110461700 ) ) ; +#8044 = CARTESIAN_POINT ( 'NONE', ( 5.848390441902910900, -31.14605228387808500, 24.80496607283187800 ) ) ; +#8045 = CARTESIAN_POINT ( 'NONE', ( 4.014196536209045300, -29.72340557785256700, 23.77520870045749400 ) ) ; +#8046 = CARTESIAN_POINT ( 'NONE', ( 26.65638047096879100, -13.92587269295469800, -25.69223727859459000 ) ) ; +#8047 = CARTESIAN_POINT ( 'NONE', ( 28.38839853738840400, -19.59961489010728600, 22.12370266494247800 ) ) ; +#8048 = EDGE_LOOP ( 'NONE', ( #7155, #3763, #7855, #7598, #10371, #6935, #7702, #3396 ) ) ; +#8049 = CARTESIAN_POINT ( 'NONE', ( 28.68813440735806400, -11.14063917059208100, 24.45614895767085900 ) ) ; +#8050 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -8.008944849903937100, 16.57431673730082600 ) ) ; +#8051 = ADVANCED_FACE ( 'NONE', ( #14340, #11782 ), #10846, .F. ) ; +#8052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#8053 = CARTESIAN_POINT ( 'NONE', ( 28.23215332208734600, -12.50000000000043500, -21.55252921762173900 ) ) ; +#8054 = CARTESIAN_POINT ( 'NONE', ( 38.99826817062334800, -10.00000000000000000, -21.92670516149916400 ) ) ; +#8055 = CARTESIAN_POINT ( 'NONE', ( 33.94211476404088000, -30.44319789647944000, 25.55575678863167600 ) ) ; +#8056 = EDGE_LOOP ( 'NONE', ( #1326, #11662 ) ) ; +#8057 = CARTESIAN_POINT ( 'NONE', ( 29.89841432568718500, -23.89956734796462700, 17.58768086923900100 ) ) ; +#8058 = CARTESIAN_POINT ( 'NONE', ( 33.39383358381740400, -30.40819567462394300, 25.93225150728948900 ) ) ; +#8059 = CARTESIAN_POINT ( 'NONE', ( 11.06039876432022200, -30.82563645067331800, 27.87711704441288400 ) ) ; +#8060 = CARTESIAN_POINT ( 'NONE', ( 11.85770179585960600, -19.74347140260997700, 22.16334228644838000 ) ) ; +#8061 = CARTESIAN_POINT ( 'NONE', ( 15.18798297175467500, -12.49999999999999300, -12.95294780439154900 ) ) ; +#8062 = CARTESIAN_POINT ( 'NONE', ( 2.117525709379605400, -11.91741274050320800, -18.95475523009079000 ) ) ; +#8063 = CARTESIAN_POINT ( 'NONE', ( 24.91776624952975500, -12.49999999999989500, -12.62922390206685100 ) ) ; +#8064 = CARTESIAN_POINT ( 'NONE', ( 4.894953231046174300, -12.50000000000013900, 10.01431907698807900 ) ) ; +#8065 = ORIENTED_EDGE ( 'NONE', *, *, #3663, .T. ) ; +#8066 = EDGE_CURVE ( 'NONE', #1432, #4138, #5290, .T. ) ; +#8067 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8068 = CARTESIAN_POINT ( 'NONE', ( 23.62170818208649300, -12.50000000000000000, 9.873876652888297300 ) ) ; +#8069 = DIRECTION ( 'NONE', ( 0.9981804626610402100, -0.06029729647166469400, 0.0000000000000000000 ) ) ; +#8070 = CARTESIAN_POINT ( 'NONE', ( 36.97431182877698300, -19.54373998171481500, 12.33538000558986900 ) ) ; +#8071 = EDGE_LOOP ( 'NONE', ( #6564, #3594, #12866, #3947 ) ) ; +#8072 = CARTESIAN_POINT ( 'NONE', ( 39.01524947709936700, -10.00000000000000000, -17.53431316624961400 ) ) ; +#8073 = CYLINDRICAL_SURFACE ( 'NONE', #7094, 5.000000000000000900 ) ; +#8074 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.22609194186927100, 7.832681976494128200 ) ) ; +#8075 = CARTESIAN_POINT ( 'NONE', ( 9.239451356104863700, -30.96811020282947500, 27.16653003642310800 ) ) ; +#8076 = CARTESIAN_POINT ( 'NONE', ( 35.77688027526824800, -30.36360506898772000, 24.01648700442551700 ) ) ; +#8077 = CARTESIAN_POINT ( 'NONE', ( 12.27904052769507000, -30.96230550829654900, 28.20904725471722700 ) ) ; +#8078 = ORIENTED_EDGE ( 'NONE', *, *, #8018, .F. ) ; +#8079 = CARTESIAN_POINT ( 'NONE', ( 5.848379338638994600, -29.45484625446104900, 25.10319172737851200 ) ) ; +#8080 = DIRECTION ( 'NONE', ( -6.938893903907232300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8081 = CARTESIAN_POINT ( 'NONE', ( 23.17844877291369300, -31.28084508497431300, 28.74761283924199500 ) ) ; +#8082 = CARTESIAN_POINT ( 'NONE', ( 17.51853928026179100, -28.77816371652370700, 29.18890308861619700 ) ) ; +#8083 = VERTEX_POINT ( 'NONE', #854 ) ; +#8084 = EDGE_CURVE ( 'NONE', #11717, #11471, #6522, .T. ) ; +#8085 = CARTESIAN_POINT ( 'NONE', ( 3.688363354534017500, -28.94673221850495900, 22.32111552332219500 ) ) ; +#8086 = CIRCLE ( 'NONE', #13629, 10.00000000000000000 ) ; +#8087 = CARTESIAN_POINT ( 'NONE', ( 31.34961274785737100, -30.98090021733363700, 26.88663487442315200 ) ) ; +#8088 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8089 = CARTESIAN_POINT ( 'NONE', ( 36.93935016750814500, -30.35923351211845800, 21.73814994442565800 ) ) ; +#8090 = CARTESIAN_POINT ( 'NONE', ( 8.910573860492609900, -100.0000000000000100, 3.157855994976428900 ) ) ; +#8091 = EDGE_LOOP ( 'NONE', ( #5189, #2411, #10718, #8078 ) ) ; +#8092 = CARTESIAN_POINT ( 'NONE', ( 36.84593217413500100, -28.83317293315492000, 20.54694691616178700 ) ) ; +#8093 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -10.00000000000000000, -24.99999999999999600 ) ) ; +#8094 = CARTESIAN_POINT ( 'NONE', ( 8.091429582500927300, -31.11604928271371400, 26.51877736238189700 ) ) ; +#8095 = AXIS2_PLACEMENT_3D ( 'NONE', #456, #8225, #1553 ) ; +#8096 = CARTESIAN_POINT ( 'NONE', ( 4.544560912134179500, -30.96828726739286700, 23.37268973886815400 ) ) ; +#8097 = LINE ( 'NONE', #586, #8115 ) ; +#8098 = CARTESIAN_POINT ( 'NONE', ( 33.83170758924490000, -12.75215291211860000, -25.48527881345631800 ) ) ; +#8099 = ORIENTED_EDGE ( 'NONE', *, *, #4030, .T. ) ; +#8100 = CARTESIAN_POINT ( 'NONE', ( 11.60293328870190000, -9.994244498436243500, -24.99999999999730000 ) ) ; +#8101 = VECTOR ( 'NONE', #3846, 1000.000000000000000 ) ; +#8102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8103 = CARTESIAN_POINT ( 'NONE', ( 15.32186352766700200, -12.50000000000002500, 8.840162078151502500 ) ) ; +#8104 = CARTESIAN_POINT ( 'NONE', ( 23.46629921305583000, -12.49999999999998600, -14.34945406907795700 ) ) ; +#8105 = CARTESIAN_POINT ( 'NONE', ( 35.12507435728260000, -9.999999999999127800, -22.81997633900914500 ) ) ; +#8106 = EDGE_LOOP ( 'NONE', ( #1015, #2153, #8184 ) ) ; +#8107 = CARTESIAN_POINT ( 'NONE', ( 32.09191294301679400, -12.50000000000036800, 17.60970420667946700 ) ) ; +#8108 = EDGE_CURVE ( 'NONE', #8513, #10743, #12144, .T. ) ; +#8109 = CARTESIAN_POINT ( 'NONE', ( 33.25619900295178200, -31.15136480825705000, 25.59479492794394100 ) ) ; +#8110 = CARTESIAN_POINT ( 'NONE', ( 11.05996729325810100, -30.79329598823215600, 27.88260048219276000 ) ) ; +#8111 = CARTESIAN_POINT ( 'NONE', ( 13.27891002842138200, -19.99913423654911100, 22.62136372511115600 ) ) ; +#8112 = CARTESIAN_POINT ( 'NONE', ( 5.590836772308031200, -21.97362612624091900, -15.74796262841134700 ) ) ; +#8113 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999992000, -97.04517183358962000, 16.23828164244122600 ) ) ; +#8114 = CARTESIAN_POINT ( 'NONE', ( 34.41697392814667500, -21.97727832809524500, -15.72364134860849600 ) ) ; +#8115 = VECTOR ( 'NONE', #8363, 1000.000000000000000 ) ; +#8116 = CARTESIAN_POINT ( 'NONE', ( 15.05457756061827900, -12.50000000000002700, 8.100020537223093300 ) ) ; +#8117 = VERTEX_POINT ( 'NONE', #7543 ) ; +#8118 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #12700, #13892 ), + ( #7212, #588 ), + ( #8365, #1687 ), + ( #9484, #2782 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.9590174129127589900, 0.9590174129127589900), + ( 0.9590174129127589900, 0.9590174129127589900), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8119 = CARTESIAN_POINT ( 'NONE', ( 0.07785841796037951100, 10.13070237256533300, 18.20976545616827700 ) ) ; +#8120 = CARTESIAN_POINT ( 'NONE', ( 17.43873147890898100, -19.88640213962530700, 23.25679227354088100 ) ) ; +#8121 = CARTESIAN_POINT ( 'NONE', ( 8.410214004456175700, -95.07596123493895800, 15.98148681752835800 ) ) ; +#8122 = CARTESIAN_POINT ( 'NONE', ( 36.60663294293673400, -18.93900490878484500, 13.85567088224268200 ) ) ; +#8123 = ORIENTED_EDGE ( 'NONE', *, *, #13520, .F. ) ; +#8124 = CARTESIAN_POINT ( 'NONE', ( 21.12696582476272800, -10.00000000000000200, -29.24705746294739600 ) ) ; +#8125 = CARTESIAN_POINT ( 'NONE', ( 9.228986277908754600, -30.63838144558903700, 27.24899318252150200 ) ) ; +#8126 = CARTESIAN_POINT ( 'NONE', ( 35.25407911758255600, -29.17845288124107100, 23.94882202259190900 ) ) ; +#8127 = CARTESIAN_POINT ( 'NONE', ( 37.79826246442499400, -18.80695014229989700, 7.934335535720267200 ) ) ; +#8128 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13070, #8641, #3325, #11177, #4451, #12276, #5551, #13383 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0002553624233332200100, 0.0003830436349998302400, 0.0005107248466664404600 ), + .UNSPECIFIED. ) ; +#8129 = CIRCLE ( 'NONE', #13544, 2.500000000000000400 ) ; +#8130 = ADVANCED_FACE ( 'NONE', ( #3545 ), #1996, .T. ) ; +#8131 = VERTEX_POINT ( 'NONE', #4217 ) ; +#8132 = CARTESIAN_POINT ( 'NONE', ( 13.23526018147229000, -19.99962306679318800, 22.61513197279454300 ) ) ; +#8133 = CARTESIAN_POINT ( 'NONE', ( 5.788683986788561800, -30.52043887417351100, 25.34242718825807500 ) ) ; +#8134 = CARTESIAN_POINT ( 'NONE', ( 23.22036376733920800, -24.23401311918557600, 19.97211951868745700 ) ) ; +#8135 = CARTESIAN_POINT ( 'NONE', ( 1.001731829375520600, -10.00000000000000000, -21.92670516149776800 ) ) ; +#8136 = CARTESIAN_POINT ( 'NONE', ( 17.39762135614234900, -19.90864822626257400, 23.25255904423470500 ) ) ; +#8137 = ORIENTED_EDGE ( 'NONE', *, *, #11373, .F. ) ; +#8138 = CARTESIAN_POINT ( 'NONE', ( 3.186548843496806800, -30.34795756331091700, 22.37525303653562500 ) ) ; +#8139 = CARTESIAN_POINT ( 'NONE', ( 31.25240424280696800, -30.34388274945222000, 27.04786337118517300 ) ) ; +#8140 = CARTESIAN_POINT ( 'NONE', ( 14.56650248350942400, -28.03491095736678700, 27.28351691550835400 ) ) ; +#8141 = CARTESIAN_POINT ( 'NONE', ( 7.297996903579727000, -30.16998723629765100, 26.31804212964868500 ) ) ; +#8142 = CARTESIAN_POINT ( 'NONE', ( 36.46334368335107700, -28.93782356447588500, 22.05076479012101800 ) ) ; +#8143 = FACE_OUTER_BOUND ( 'NONE', #13438, .T. ) ; +#8144 = CARTESIAN_POINT ( 'NONE', ( 5.650693702021849100, -22.03500000000001400, 11.72160656340875000 ) ) ; +#8145 = AXIS2_PLACEMENT_3D ( 'NONE', #7703, #4373, #8844 ) ; +#8146 = CARTESIAN_POINT ( 'NONE', ( 36.23721647636909900, -23.03508306318661500, 13.64223878774040700 ) ) ; +#8147 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #4162, #3053, #6406, #14210 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.03480832596072334900, 0.04338480368557981500 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9999938703452127000, 0.9999938703452127000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#8148 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -20.68999999999999400 ) ) ; +#8149 = CARTESIAN_POINT ( 'NONE', ( 10.75129813147146700, -30.87385896744458700, 27.77005979427387300 ) ) ; +#8150 = CARTESIAN_POINT ( 'NONE', ( 4.013630858555638200, -30.06182710776007000, 23.88161950307120300 ) ) ; +#8151 = CARTESIAN_POINT ( 'NONE', ( 38.00486650575157900, -11.85657085118596600, -18.72495531882405500 ) ) ; +#8152 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000943700, -94.37750194603368900, 14.93715116101696300 ) ) ; +#8153 = ORIENTED_EDGE ( 'NONE', *, *, #4322, .T. ) ; +#8154 = CARTESIAN_POINT ( 'NONE', ( 10.83894347441994900, -10.44529040733824000, -25.03430901551518800 ) ) ; +#8155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8156 = CARTESIAN_POINT ( 'NONE', ( 12.81556656898725600, -28.88618117369600900, 28.67220795627903800 ) ) ; +#8157 = CARTESIAN_POINT ( 'NONE', ( 27.16131596509662300, -20.88936975052439800, -23.50182714740891000 ) ) ; +#8158 = EDGE_CURVE ( 'NONE', #8761, #4265, #6999, .T. ) ; +#8159 = CARTESIAN_POINT ( 'NONE', ( 32.89315033045854600, -12.43027692430234100, -24.03914775183467300 ) ) ; +#8160 = CARTESIAN_POINT ( 'NONE', ( 24.26620912934225800, -12.49999999999999800, 9.388246689922061300 ) ) ; +#8161 = CARTESIAN_POINT ( 'NONE', ( 33.27605746976225700, -30.18136104861540400, 25.99369298564714000 ) ) ; +#8162 = CARTESIAN_POINT ( 'NONE', ( 11.16287944059435900, -30.83259374758527800, 27.90673852214433700 ) ) ; +#8163 = CARTESIAN_POINT ( 'NONE', ( 15.20930030208818600, -19.18131856202476400, 23.24396267949172700 ) ) ; +#8164 = CARTESIAN_POINT ( 'NONE', ( 5.887878082830762400, -12.50000000000001600, -15.19731711330349800 ) ) ; +#8165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669239200 ) ) ; +#8166 = CARTESIAN_POINT ( 'NONE', ( 33.62049808491354200, -12.50000000000258300, -16.22940642732880100 ) ) ; +#8167 = ORIENTED_EDGE ( 'NONE', *, *, #9378, .F. ) ; +#8168 = AXIS2_PLACEMENT_3D ( 'NONE', #1099, #8887, #2192 ) ; +#8169 = CARTESIAN_POINT ( 'NONE', ( 22.56123850041398900, -19.88642326305406600, 23.25678856832246000 ) ) ; +#8170 = CARTESIAN_POINT ( 'NONE', ( 26.86686212561989300, -95.07596123493894400, 16.51084753338848900 ) ) ; +#8171 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#8172 = CARTESIAN_POINT ( 'NONE', ( 12.67592150165289600, -94.71789415301088900, 18.31665940589411400 ) ) ; +#8173 = CARTESIAN_POINT ( 'NONE', ( 34.68331248000638600, -20.48518928892142600, 16.81911197675623600 ) ) ; +#8174 = CARTESIAN_POINT ( 'NONE', ( 28.38839853738845100, -20.40038510989247200, -25.65024227911159100 ) ) ; +#8175 = CARTESIAN_POINT ( 'NONE', ( 9.342146187531927400, -31.00981226729932800, 27.19457048232734000 ) ) ; +#8176 = CARTESIAN_POINT ( 'NONE', ( 35.72585675789399300, -30.11788652029049000, 24.18545264270049300 ) ) ; +#8177 = CARTESIAN_POINT ( 'NONE', ( 17.64039537637298900, -27.96255689439422200, 27.45771657700752000 ) ) ; +#8178 = EDGE_CURVE ( 'NONE', #3673, #8423, #14268, .T. ) ; +#8179 = PERSON_AND_ORGANIZATION ( #9068, #11176 ) ; +#8180 = CARTESIAN_POINT ( 'NONE', ( 3.720445566722625500, -20.72281319169252000, 13.96018573422605700 ) ) ; +#8181 = CYLINDRICAL_SURFACE ( 'NONE', #5611, 1.200000000000003100 ) ; +#8182 = CARTESIAN_POINT ( 'NONE', ( 31.28679656440356600, -89.20772034660433300, 11.03354182248334700 ) ) ; +#8183 = CARTESIAN_POINT ( 'NONE', ( 5.980613271492878800, -29.55933626031148300, 25.26813184746741200 ) ) ; +#8184 = ORIENTED_EDGE ( 'NONE', *, *, #3136, .F. ) ; +#8185 = CARTESIAN_POINT ( 'NONE', ( 31.05623656863848600, -23.76498691932213000, 16.63199829461923000 ) ) ; +#8186 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6127, #7206, #7257 ), + ( #633, #8409, #1727 ), + ( #9536, #2821, #10665 ), + ( #3946, #11779, #5047 ), + ( #12889, #6177, #13985 ), + ( #7306, #680, #8457 ), + ( #1775, #9580, #2876 ), + ( #10712, #3990, #11827 ), + ( #5100, #12937, #6229 ), + ( #14037, #7359, #731 ), + ( #8512, #1827, #9637 ), + ( #2929, #10773, #4040 ), + ( #11882, #5154, #12992 ), + ( #6282, #14093, #7422 ), + ( #781, #8566, #1884 ), + ( #9694, #2984, #10828 ), + ( #4098, #11933, #5209 ), + ( #13047, #6336, #14146 ), + ( #7476, #837, #8620 ), + ( #1933, #9749, #3037 ), + ( #10882, #4146, #11987 ), + ( #5257, #13099, #6391 ), + ( #14198, #7526, #883 ), + ( #8671, #1978, #9796 ), + ( #3092, #10934, #4201 ), + ( #12034, #5308, #13148 ), + ( #6442, #14243, #7575 ), + ( #927, #8716, #2030 ), + ( #9841, #3134, #10984 ), + ( #4248, #12080, #5353 ), + ( #13194, #6484, #14284 ), + ( #7621, #971, #8759 ), + ( #2069, #9889, #3177 ), + ( #11025, #4298, #12124 ), + ( #5392, #13235, #6528 ), + ( #14327, #7665, #1020 ), + ( #8806, #2108, #9935 ), + ( #3221, #11062, #4337 ), + ( #12172, #5435, #13277 ), + ( #6572, #14371, #7713 ), + ( #1064, #8854, #2151 ), + ( #9973, #3261, #11108 ), + ( #4382, #12213, #5485 ), + ( #13323, #6617, #24 ), + ( #7764, #1109, #8899 ), + ( #2202, #10017, #3305 ), + ( #11155, #4429, #12260 ), + ( #5532, #13364, #6666 ), + ( #71, #7810, #1161 ), + ( #8946, #2246, #10071 ), + ( #3351, #11198, #4472 ), + ( #12304, #5581, #13409 ), + ( #6716, #116, #7853 ), + ( #1205, #8992, #2291 ), + ( #10119, #3403, #11245 ), + ( #4517, #12351, #5629 ), + ( #13452, #6760, #164 ), + ( #7899, #1242, #9038 ), + ( #2337, #10163, #3447 ), + ( #11294, #4560, #13602 ), + ( #6916, #310, #8061 ), + ( #1399, #9197, #2492 ), + ( #10308, #3606, #11450 ), + ( #4711, #12549, #5844 ), + ( #13650, #6963, #355 ), + ( #8112, #1443, #9241 ), + ( #2541, #10357, #3648 ), + ( #11494, #4761, #12596 ), + ( #5888, #13703, #7015 ), + ( #401, #8164, #1499 ), + ( #9289, #2589, #10410 ), + ( #3699, #11544, #4808 ), + ( #12643, #5935, #13745 ), + ( #7067, #447, #8216 ), + ( #1545, #9338, #2633 ), + ( #10460, #3749, #11590 ), + ( #4853, #12693, #5987 ), + ( #13792, #7112, #501 ), + ( #8262, #1588, #9385 ), + ( #2681, #10510, #3796 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.604619215278546600E-016, 0.0002478614204948541500, 0.0003717921307422009900, 0.0004957228409895478400, 0.0007435842614842415300, 0.0008675149717315884300, 0.0009294803268552618200, 0.0009914456819789352200, 0.001115376392226282000, 0.001177341747349955500, 0.001208324424911792200, 0.001223815763692710500, 0.001239307102473628800, 0.001363237812720975800, 0.001425203167844649100, 0.001456185845406485700, 0.001471677184187404300, 0.001487168522968322600, 0.001735029943463016400, 0.001858960653710363200, 0.001920926008834036700, 0.001982891363957710000, 0.002230752784452403600, 0.002354683494699750600, 0.002478614204947097100, 0.002726475625441791100, 0.002850406335689137700, 0.002912371690812811000, 0.002943354368374648100, 0.002958845707155566600, 0.002974337045936484700, 0.003098267756183831700, 0.003160233111307505000, 0.003191215788869341700, 0.003222198466431178300, 0.003346129176678525300, 0.003408094531802199000, 0.003470059886925872300, 0.003717921307420565900, 0.003965782727915259500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7660444431189756800, 1.000000000000000000), + ( 1.000000000000000000, 0.7660461634793871400, 1.000000000000000000), + ( 1.000000000000000000, 0.7659509098295490500, 1.000000000000000000), + ( 1.000000000000000000, 0.7656538595560727900, 1.000000000000000000), + ( 1.000000000000000000, 0.7655296717571965500, 1.000000000000000000), + ( 1.000000000000000000, 0.7652392266289399500, 1.000000000000000000), + ( 1.000000000000000000, 0.7650756358572520200, 1.000000000000000000), + ( 1.000000000000000000, 0.7645243806718914300, 1.000000000000000000), + ( 1.000000000000000000, 0.7640444876187784100, 1.000000000000000000), + ( 1.000000000000000000, 0.7631700772114441400, 1.000000000000000000), + ( 1.000000000000000000, 0.7628527874028039300, 1.000000000000000000), + ( 1.000000000000000000, 0.7623531781625041400, 1.000000000000000000), + ( 1.000000000000000000, 0.7621827114072009500, 1.000000000000000000), + ( 1.000000000000000000, 0.7618357442736484200, 1.000000000000000000), + ( 1.000000000000000000, 0.7616621027348397000, 1.000000000000000000), + ( 1.000000000000000000, 0.7611055380996173400, 1.000000000000000000), + ( 1.000000000000000000, 0.7607074871040900900, 1.000000000000000000), + ( 1.000000000000000000, 0.7600802733111163800, 1.000000000000000000), + ( 1.000000000000000000, 0.7598662439476373500, 1.000000000000000000), + ( 1.000000000000000000, 0.7595394688402978800, 1.000000000000000000), + ( 1.000000000000000000, 0.7594295902214226500, 1.000000000000000000), + ( 1.000000000000000000, 0.7592635652485710800, 1.000000000000000000), + ( 1.000000000000000000, 0.7592116630116942900, 1.000000000000000000), + ( 1.000000000000000000, 0.7590902284946401400, 1.000000000000000000), + ( 1.000000000000000000, 0.7590300718707450000, 1.000000000000000000), + ( 1.000000000000000000, 0.7584923243783771000, 1.000000000000000000), + ( 1.000000000000000000, 0.7580381469545920400, 1.000000000000000000), + ( 1.000000000000000000, 0.7573174127741207900, 1.000000000000000000), + ( 1.000000000000000000, 0.7570710221607032100, 1.000000000000000000), + ( 1.000000000000000000, 0.7566805903434754600, 1.000000000000000000), + ( 1.000000000000000000, 0.7565469323658923200, 1.000000000000000000), + ( 1.000000000000000000, 0.7563389055024094500, 1.000000000000000000), + ( 1.000000000000000000, 0.7562619581587748400, 1.000000000000000000), + ( 1.000000000000000000, 0.7561347053772484700, 1.000000000000000000), + ( 1.000000000000000000, 0.7560705174753454800, 1.000000000000000000), + ( 1.000000000000000000, 0.7549698274153895400, 1.000000000000000000), + ( 1.000000000000000000, 0.7537755685407103700, 1.000000000000000000), + ( 1.000000000000000000, 0.7518872637385462000, 1.000000000000000000), + ( 1.000000000000000000, 0.7512433008563511600, 1.000000000000000000), + ( 1.000000000000000000, 0.7502750112591731700, 1.000000000000000000), + ( 1.000000000000000000, 0.7499518451366115100, 1.000000000000000000), + ( 1.000000000000000000, 0.7493075215019139300, 1.000000000000000000), + ( 1.000000000000000000, 0.7489878194895852600, 1.000000000000000000), + ( 1.000000000000000000, 0.7472948579710783100, 1.000000000000000000), + ( 1.000000000000000000, 0.7458721068428952900, 1.000000000000000000), + ( 1.000000000000000000, 0.7436722172199531400, 1.000000000000000000), + ( 1.000000000000000000, 0.7429113085955768600, 1.000000000000000000), + ( 1.000000000000000000, 0.7413612338702507700, 1.000000000000000000), + ( 1.000000000000000000, 0.7405662002470011500, 1.000000000000000000), + ( 1.000000000000000000, 0.7382479625348303800, 1.000000000000000000), + ( 1.000000000000000000, 0.7365638959204526800, 1.000000000000000000), + ( 1.000000000000000000, 0.7339826307645190800, 1.000000000000000000), + ( 1.000000000000000000, 0.7331144638947771900, 1.000000000000000000), + ( 1.000000000000000000, 0.7318234742375935300, 1.000000000000000000), + ( 1.000000000000000000, 0.7313949913867282500, 1.000000000000000000), + ( 1.000000000000000000, 0.7307574129303453500, 1.000000000000000000), + ( 1.000000000000000000, 0.7305457395969732200, 1.000000000000000000), + ( 1.000000000000000000, 0.7302297621550910600, 1.000000000000000000), + ( 1.000000000000000000, 0.7301246913229537700, 1.000000000000000000), + ( 1.000000000000000000, 0.7299150981722253300, 1.000000000000000000), + ( 1.000000000000000000, 0.7297895990102736300, 1.000000000000000000), + ( 1.000000000000000000, 0.7287526621038173900, 1.000000000000000000), + ( 1.000000000000000000, 0.7279023341249092300, 1.000000000000000000), + ( 1.000000000000000000, 0.7265976825412230300, 1.000000000000000000), + ( 1.000000000000000000, 0.7261589634552332300, 1.000000000000000000), + ( 1.000000000000000000, 0.7254782871607744500, 1.000000000000000000), + ( 1.000000000000000000, 0.7252475920080103700, 1.000000000000000000), + ( 1.000000000000000000, 0.7247746831259600500, 1.000000000000000000), + ( 1.000000000000000000, 0.7245270347213262900, 1.000000000000000000), + ( 1.000000000000000000, 0.7233888907376434500, 1.000000000000000000), + ( 1.000000000000000000, 0.7224518496571608100, 1.000000000000000000), + ( 1.000000000000000000, 0.7210359404057508100, 1.000000000000000000), + ( 1.000000000000000000, 0.7205631831677497000, 1.000000000000000000), + ( 1.000000000000000000, 0.7196202505814088800, 1.000000000000000000), + ( 1.000000000000000000, 0.7191412881354711800, 1.000000000000000000), + ( 1.000000000000000000, 0.7168740198775839200, 1.000000000000000000), + ( 1.000000000000000000, 0.7149218163068782300, 1.000000000000000000), + ( 1.000000000000000000, 0.7109713817650977800, 1.000000000000000000), + ( 1.000000000000000000, 0.7089815844816478300, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865482400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8187 = CARTESIAN_POINT ( 'NONE', ( 5.683569437990994900, -12.29954606367697200, -23.14960760001699600 ) ) ; +#8188 = CARTESIAN_POINT ( 'NONE', ( 15.99633292959548200, -97.51525546413452600, 22.02908155135812900 ) ) ; +#8189 = CARTESIAN_POINT ( 'NONE', ( 2.544588105355119400, -10.00000000000000400, -20.84018286190879000 ) ) ; +#8190 = CARTESIAN_POINT ( 'NONE', ( 3.458518508332769900, -29.17658079137995100, 22.57853003309346100 ) ) ; +#8191 = CARTESIAN_POINT ( 'NONE', ( 31.26556882709602500, -30.79710127164391100, 26.99728546578026900 ) ) ; +#8192 = CARTESIAN_POINT ( 'NONE', ( 7.529877581041073900, -31.10589083225668000, 26.18875501253739600 ) ) ; +#8193 = CARTESIAN_POINT ( 'NONE', ( 37.37489511168800500, -29.98748598466442100, 21.85553620008445800 ) ) ; +#8194 = LINE ( 'NONE', #1746, #9789 ) ; +#8195 = CARTESIAN_POINT ( 'NONE', ( 37.40947354459508000, -26.72172102668553300, 8.782065803109636800 ) ) ; +#8196 = PERSON_AND_ORGANIZATION ( #9068, #11176 ) ; +#8197 = CARTESIAN_POINT ( 'NONE', ( 17.64039537637670600, -27.96255689439415100, 27.45771657700753500 ) ) ; +#8198 = VERTEX_POINT ( 'NONE', #7636 ) ; +#8199 = EDGE_CURVE ( 'NONE', #4045, #2296, #9510, .T. ) ; +#8200 = CARTESIAN_POINT ( 'NONE', ( 4.545741049044411700, -29.13080758212080200, 23.69599315161456600 ) ) ; +#8201 = CARTESIAN_POINT ( 'NONE', ( 28.25157108407876500, -10.50981410104666100, 24.88091903732053800 ) ) ; +#8202 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -97.57596123474587600, 12.92967537946790000 ) ) ; +#8203 = CARTESIAN_POINT ( 'NONE', ( 9.792118352411611300, -10.95279079453199100, -24.99999999999999600 ) ) ; +#8204 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3332, #50, #4456, #12282, #5559, #13387, #6694, #94, #7834, #1188 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979365200, 0.002130928723958730500, 0.003196393085938095700, 0.004261857447917460900 ), + .UNSPECIFIED. ) ; +#8205 = CARTESIAN_POINT ( 'NONE', ( 29.25594562045819600, -17.46754437538991000, -26.31672955301981200 ) ) ; +#8206 = ADVANCED_FACE ( 'NONE', ( #7577 ), #6189, .T. ) ; +#8207 = CARTESIAN_POINT ( 'NONE', ( 8.140466861689725800, -29.04582602365524100, 27.10751997110443800 ) ) ; +#8208 = CARTESIAN_POINT ( 'NONE', ( 25.99841424497299200, -12.49999999999937600, -22.44305284257799500 ) ) ; +#8209 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000002100, -27.27822912890406200, 8.010598728921522100 ) ) ; +#8210 = AXIS2_PLACEMENT_3D ( 'NONE', #6169, #5092, #12928 ) ; +#8211 = CARTESIAN_POINT ( 'NONE', ( 32.51042651241957100, -23.53833223510038400, 15.00880402491373100 ) ) ; +#8212 = CARTESIAN_POINT ( 'NONE', ( 33.23963492435282800, -30.93040066821670900, 25.80629866359539200 ) ) ; +#8213 = ORIENTED_EDGE ( 'NONE', *, *, #5992, .F. ) ; +#8214 = CARTESIAN_POINT ( 'NONE', ( 11.16310140394401400, -30.81685580143880500, 27.90957821308432000 ) ) ; +#8215 = CARTESIAN_POINT ( 'NONE', ( 16.72599814567212600, -19.43697410911834600, 23.33469061087464500 ) ) ; +#8216 = CARTESIAN_POINT ( 'NONE', ( 15.05495754604719000, -12.49999999999999800, -12.51038607605645000 ) ) ; +#8217 = CARTESIAN_POINT ( 'NONE', ( 24.73106841216595000, -12.49999999999994500, -13.13601014816601200 ) ) ; +#8218 = CARTESIAN_POINT ( 'NONE', ( 17.00654856799194200, -22.30077670459232000, -27.16380276189244800 ) ) ; +#8219 = CARTESIAN_POINT ( 'NONE', ( 30.44968697213190000, -95.07596123493894400, 16.44215299903249400 ) ) ; +#8220 = CARTESIAN_POINT ( 'NONE', ( 20.78653487454235800, -27.93250714223469100, 27.46301515907685300 ) ) ; +#8221 = CARTESIAN_POINT ( 'NONE', ( 37.79844565445807100, -18.80762274693986000, -11.58852681708394500 ) ) ; +#8222 = ORIENTED_EDGE ( 'NONE', *, *, #14312, .T. ) ; +#8223 = EDGE_CURVE ( 'NONE', #3158, #11560, #9698, .T. ) ; +#8224 = CARTESIAN_POINT ( 'NONE', ( 33.78728397481939500, -19.93385521106598900, 18.06165340067335000 ) ) ; +#8225 = DIRECTION ( 'NONE', ( -0.8646995353985705800, -0.005415397997236929900, 0.5022602780889882100 ) ) ; +#8226 = CARTESIAN_POINT ( 'NONE', ( 12.50931411044448400, -11.77689556249822700, 24.56128784286377400 ) ) ; +#8227 = CARTESIAN_POINT ( 'NONE', ( 9.328424578067011200, -30.72291220887962000, 27.27755914436388100 ) ) ; +#8228 = CARTESIAN_POINT ( 'NONE', ( 35.25517628370483400, -31.00990154208129100, 23.62682543652116600 ) ) ; +#8229 = VERTEX_POINT ( 'NONE', #13292 ) ; +#8230 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -90.07596123493895800, -4.350951650170483900 ) ) ; +#8231 = CARTESIAN_POINT ( 'NONE', ( 35.58505180168901900, -94.81572042520439000, 8.755760547895899700 ) ) ; +#8232 = CARTESIAN_POINT ( 'NONE', ( 6.128097988429180600, -30.85488698487074500, 25.38881371792532000 ) ) ; +#8233 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14137, #8799, #3252, #11096, #4371, #12202, #5475, #13313, #6608, #12 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.001558912963695218200, 0.003265974478683506900, 0.004973035993671795700, 0.006680097508660084000, 0.008387159023648373100 ), + .UNSPECIFIED. ) ; +#8234 = EDGE_LOOP ( 'NONE', ( #2955, #4895, #9763, #8544 ) ) ; +#8235 = CARTESIAN_POINT ( 'NONE', ( 34.95976324138257500, -22.64177517217329000, 8.582998331113373100 ) ) ; +#8236 = CARTESIAN_POINT ( 'NONE', ( 15.97789897159043100, -12.50000000000001200, 9.608826173885255200 ) ) ; +#8237 = CARTESIAN_POINT ( 'NONE', ( 8.270117510625041700, -9.999999999999998200, -24.57554873491412200 ) ) ; +#8238 = CARTESIAN_POINT ( 'NONE', ( 10.67264159402572000, -20.38769525366765500, -25.20277282546934600 ) ) ; +#8239 = CARTESIAN_POINT ( 'NONE', ( 3.788457639549473100, -30.70758965268108300, 22.51205705813061200 ) ) ; +#8240 = EDGE_CURVE ( 'NONE', #8998, #2204, #7210, .T. ) ; +#8241 = ORIENTED_EDGE ( 'NONE', *, *, #13131, .F. ) ; +#8242 = CARTESIAN_POINT ( 'NONE', ( 31.04914012419624900, -30.30057032859134100, 27.13268372238001500 ) ) ; +#8243 = CARTESIAN_POINT ( 'NONE', ( 7.459120648220325800, -30.45520860045592200, 26.42596436136031800 ) ) ; +#8244 = CARTESIAN_POINT ( 'NONE', ( 36.32310826636131700, -28.92300683959361200, 22.22304405607332000 ) ) ; +#8245 = ORIENTED_EDGE ( 'NONE', *, *, #10050, .F. ) ; +#8246 = CARTESIAN_POINT ( 'NONE', ( 22.35960558233108800, -33.35446909076590300, 26.50697697917619800 ) ) ; +#8247 = CARTESIAN_POINT ( 'NONE', ( 4.222899053597702200, -30.36355862402470900, 24.01622949041026800 ) ) ; +#8248 = CARTESIAN_POINT ( 'NONE', ( 33.68362413751021500, -7.656603847411836300, 25.00000000000000700 ) ) ; +#8249 = CARTESIAN_POINT ( 'NONE', ( 9.537217879251720400, -12.28571944906485000, -24.99999999999525400 ) ) ; +#8250 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#8251 = CARTESIAN_POINT ( 'NONE', ( 24.58752164016317800, -18.12490759859338500, -26.43264042539518100 ) ) ; +#8252 = CARTESIAN_POINT ( 'NONE', ( 5.419063731062952800, -31.14373878535524300, 25.22334512433251100 ) ) ; +#8253 = ORIENTED_EDGE ( 'NONE', *, *, #3752, .F. ) ; +#8254 = AXIS2_PLACEMENT_3D ( 'NONE', #4417, #12249, #5519 ) ; +#8255 = CARTESIAN_POINT ( 'NONE', ( 23.18965029371464200, -12.50000000000000200, -14.44980387827024200 ) ) ; +#8256 = CARTESIAN_POINT ( 'NONE', ( 32.35981764834239300, -19.09658601918274500, 19.77674584576557800 ) ) ; +#8257 = CARTESIAN_POINT ( 'NONE', ( 34.20998853081770400, -12.50000000000031100, 14.11050260017818500 ) ) ; +#8258 = CARTESIAN_POINT ( 'NONE', ( 33.02457849545255200, -29.89529521662901600, 26.05855518939301200 ) ) ; +#8259 = CARTESIAN_POINT ( 'NONE', ( 3.315315731398590100, -32.11798959397774000, 10.84415656343919900 ) ) ; +#8260 = ORIENTED_EDGE ( 'NONE', *, *, #6949, .T. ) ; +#8261 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455800, -30.82654731345000300, 27.93780948130459400 ) ) ; +#8262 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000001800, -22.44696172297921800, -12.35714945962816600 ) ) ; +#8263 = CARTESIAN_POINT ( 'NONE', ( 31.92575913414723100, -21.35568905869522300, -20.17398307812699100 ) ) ; +#8264 = CARTESIAN_POINT ( 'NONE', ( 32.87373090903939500, -21.53280261566953200, -18.90805060316961700 ) ) ; +#8265 = VECTOR ( 'NONE', #1767, 1000.000000000000000 ) ; +#8266 = EDGE_CURVE ( 'NONE', #11560, #1461, #1153, .T. ) ; +#8267 = CARTESIAN_POINT ( 'NONE', ( 22.48440551206336800, -25.57203575182675700, 22.25469830895990200 ) ) ; +#8268 = CARTESIAN_POINT ( 'NONE', ( 34.10193078771731500, -94.71799171674928200, 15.74191768023252000 ) ) ; +#8269 = CARTESIAN_POINT ( 'NONE', ( 30.63770951099171200, -30.40470423453194500, 27.31044659668106100 ) ) ; +#8270 = CARTESIAN_POINT ( 'NONE', ( 5.313280731601868600, -99.99999999999998600, -28.50008026614132500 ) ) ; +#8271 = ORIENTED_EDGE ( 'NONE', *, *, #11982, .T. ) ; +#8272 = CARTESIAN_POINT ( 'NONE', ( 32.44193003149732800, -19.47389115719471100, 19.58129717909416100 ) ) ; +#8273 = CARTESIAN_POINT ( 'NONE', ( 2.499999989297200900, -21.23105625617693100, -11.53187062879838500 ) ) ; +#8274 = CARTESIAN_POINT ( 'NONE', ( 9.342108035224260500, -30.40062937367352100, 27.30207806058309900 ) ) ; +#8275 = CARTESIAN_POINT ( 'NONE', ( 35.55707282810300300, -29.83783332318967400, 24.28165087110973600 ) ) ; +#8276 = FACE_OUTER_BOUND ( 'NONE', #7915, .T. ) ; +#8277 = ORIENTED_EDGE ( 'NONE', *, *, #14171, .F. ) ; +#8278 = AXIS2_PLACEMENT_3D ( 'NONE', #1531, #9322, #2617 ) ; +#8279 = LINE ( 'NONE', #9432, #8101 ) ; +#8280 = CARTESIAN_POINT ( 'NONE', ( 15.37147977751433800, -18.11938681816509000, 23.53702658884831300 ) ) ; +#8281 = ADVANCED_FACE ( 'NONE', ( #4268 ), #7727, .F. ) ; +#8282 = CARTESIAN_POINT ( 'NONE', ( 35.14083664693302500, -9.852061065451030300, 25.00000000000000400 ) ) ; +#8283 = CARTESIAN_POINT ( 'NONE', ( 6.128082720663877900, -29.92814129762204400, 25.55222990815122200 ) ) ; +#8284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8285 = CARTESIAN_POINT ( 'NONE', ( 10.58092601676480300, -23.94480099080191600, 17.91290475232562000 ) ) ; +#8286 = CARTESIAN_POINT ( 'NONE', ( 28.23955314646856600, -10.21539878535238300, -25.03798061746928000 ) ) ; +#8287 = CARTESIAN_POINT ( 'NONE', ( 22.48221797240074700, -19.90680934324638300, 23.25324492911858000 ) ) ; +#8288 = EDGE_CURVE ( 'NONE', #2364, #8423, #8831, .T. ) ; +#8289 = CARTESIAN_POINT ( 'NONE', ( 3.162452533216022000, -29.62879696587572600, 22.73223156318910300 ) ) ; +#8290 = CARTESIAN_POINT ( 'NONE', ( 4.359360734857286500E-006, -10.00000000000003000, 7.971149609504818700 ) ) ; +#8291 = VECTOR ( 'NONE', #6968, 1000.000000000000000 ) ; +#8292 = EDGE_LOOP ( 'NONE', ( #2647, #5406, #5541, #7122 ) ) ; +#8293 = CARTESIAN_POINT ( 'NONE', ( 31.07016510537134100, -30.69658186997748900, 27.11082070209166900 ) ) ; +#8294 = CYLINDRICAL_SURFACE ( 'NONE', #7670, 5.000000000000000900 ) ; +#8295 = CARTESIAN_POINT ( 'NONE', ( 2.200300854059302800, -18.78239230210402900, -12.74170992628089200 ) ) ; +#8296 = CARTESIAN_POINT ( 'NONE', ( 7.905650210628952100, -31.12841247300854500, 26.40297982880178300 ) ) ; +#8297 = CARTESIAN_POINT ( 'NONE', ( 37.35879393658236600, -29.66763998851602600, 22.06599345708779200 ) ) ; +#8298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8299 = ORIENTED_EDGE ( 'NONE', *, *, #14126, .F. ) ; +#8300 = AXIS2_PLACEMENT_3D ( 'NONE', #4339, #5438, #13279 ) ; +#8301 = CARTESIAN_POINT ( 'NONE', ( 4.561413908642578900, -29.30436810122810700, 23.93321087722655000 ) ) ; +#8302 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999946000, -10.00000000000049200, -16.35192870042604700 ) ) ; +#8303 = CARTESIAN_POINT ( 'NONE', ( 35.50863566644425600, -16.02319741446260100, -21.08502806704306600 ) ) ; +#8304 = LINE ( 'NONE', #265, #8291 ) ; +#8305 = CARTESIAN_POINT ( 'NONE', ( 24.53473726371665700, -21.80122074399942600, -26.99297417754145900 ) ) ; +#8306 = CARTESIAN_POINT ( 'NONE', ( 22.56939790140768000, -19.89445795343986800, 23.25531981105717300 ) ) ; +#8307 = ORIENTED_EDGE ( 'NONE', *, *, #5748, .F. ) ; +#8308 = CARTESIAN_POINT ( 'NONE', ( 24.91653913684915300, -20.79641269607291000, -24.16396630214465400 ) ) ; +#8309 = CARTESIAN_POINT ( 'NONE', ( 37.78565284257255300, -18.83411927578196600, 8.966377283118282200 ) ) ; +#8310 = CARTESIAN_POINT ( 'NONE', ( 24.78233487739528900, -12.50000000000005500, 8.616340524098562900 ) ) ; +#8311 = EDGE_CURVE ( 'NONE', #11717, #9017, #13968, .T. ) ; +#8312 = CARTESIAN_POINT ( 'NONE', ( 33.10987980598817200, -30.64398780365369700, 26.05941427510739000 ) ) ; +#8313 = CARTESIAN_POINT ( 'NONE', ( 2.624234567674131700, -28.30733713580791600, 8.832979447472540700 ) ) ; +#8314 = ORIENTED_EDGE ( 'NONE', *, *, #14031, .F. ) ; +#8315 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#8316 = CARTESIAN_POINT ( 'NONE', ( 24.50560627635311700, -22.45447817414065700, -27.09380178748301700 ) ) ; +#8317 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -99.99999999999998600, -38.36942826376122900 ) ) ; +#8318 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5091, #13975, #14028, #7348, #720, #8501, #1818, #9627 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002288471322915560900, 0.003432706984373341300, 0.004576942645831121700 ), + .UNSPECIFIED. ) ; +#8319 = LINE ( 'NONE', #5215, #9892 ) ; +#8320 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -20.76351822333076700, -24.39789867012037700 ) ) ; +#8321 = CARTESIAN_POINT ( 'NONE', ( 32.94301100130685000, -29.78273512981604700, 26.06044878658110200 ) ) ; +#8322 = CARTESIAN_POINT ( 'NONE', ( 11.19575091714327200, -99.99999999999998600, -36.63958563575383900 ) ) ; +#8323 = CARTESIAN_POINT ( 'NONE', ( 30.45127979709994300, -19.12546868287566300, 21.14925168176797500 ) ) ; +#8324 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -95.07596123493894400, 15.95758058754439400 ) ) ; +#8325 = CARTESIAN_POINT ( 'NONE', ( 37.45299891333510100, -21.12933064351344800, 9.030543090778637700 ) ) ; +#8326 = CARTESIAN_POINT ( 'NONE', ( 9.631169859064876000, -30.81168739087901500, 27.38183169876009900 ) ) ; +#8327 = CARTESIAN_POINT ( 'NONE', ( 35.31981065476698900, -30.86463580938251300, 23.89214194040067000 ) ) ; +#8328 = VERTEX_POINT ( 'NONE', #13466 ) ; +#8329 = CARTESIAN_POINT ( 'NONE', ( 17.52044561449707800, -30.66267912171459600, 28.85661217712031100 ) ) ; +#8330 = CARTESIAN_POINT ( 'NONE', ( 31.90692542507098000, -97.47454744058461500, 20.43096686776921800 ) ) ; +#8331 = CARTESIAN_POINT ( 'NONE', ( 3.340284653772646300, -23.69592336751826900, 12.43677308337021300 ) ) ; +#8332 = CARTESIAN_POINT ( 'NONE', ( 31.74588235243890800, -8.121210766574829900, 25.00000000000000000 ) ) ; +#8333 = CARTESIAN_POINT ( 'NONE', ( 6.310123360180161200, -31.11612909161207000, 25.27764840758058900 ) ) ; +#8334 = CARTESIAN_POINT ( 'NONE', ( 39.99999564063077200, -10.00000000000002800, 7.971149531823800600 ) ) ; +#8335 = CARTESIAN_POINT ( 'NONE', ( 10.20299006966206100, -12.49999999999958100, 19.72203450569238100 ) ) ; +#8336 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#8337 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, -1.981438871123700300 ) ) ; +#8338 = CARTESIAN_POINT ( 'NONE', ( 0.4736789281077891700, -11.89351845949345300, 8.105062184172496100 ) ) ; +#8339 = ORIENTED_EDGE ( 'NONE', *, *, #3074, .T. ) ; +#8340 = CARTESIAN_POINT ( 'NONE', ( 31.04908326105109100, -31.04594981509854500, 27.00112729586996700 ) ) ; +#8341 = CARTESIAN_POINT ( 'NONE', ( 7.845989838302303500, -30.63866394105497500, 26.60157681647297400 ) ) ; +#8342 = CARTESIAN_POINT ( 'NONE', ( 36.35402035278031000, -30.64801990789346300, 21.91736407829182200 ) ) ; +#8343 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8344 = CARTESIAN_POINT ( 'NONE', ( 4.507610631726668900, -30.75518324602012400, 23.87299997909106600 ) ) ; +#8345 = CARTESIAN_POINT ( 'NONE', ( 2.300062682188297900, -18.75814887968132500, -13.76384126361025800 ) ) ; +#8346 = DIRECTION ( 'NONE', ( 1.000000000000000000, -4.336808689942017100E-017, -7.646963822076800200E-018 ) ) ; +#8347 = CARTESIAN_POINT ( 'NONE', ( 29.55502029589413800, -30.75776036311894400, 27.69146007708881600 ) ) ; +#8348 = CARTESIAN_POINT ( 'NONE', ( 35.20550805503207700, -99.99999999999998600, 18.52319207392428500 ) ) ; +#8349 = ADVANCED_FACE ( 'NONE', ( #10216 ), #2109, .F. ) ; +#8350 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8351 = CARTESIAN_POINT ( 'NONE', ( 23.99559426614350200, -12.49999999999984900, -22.85258935596371900 ) ) ; +#8352 = EDGE_CURVE ( 'NONE', #13324, #3072, #12472, .T. ) ; +#8353 = CARTESIAN_POINT ( 'NONE', ( 37.16588764281852500, -28.70054551391713800, 18.69376205319557400 ) ) ; +#8354 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #14372, #7765, #1066 ), + ( #8900, #2203, #10018 ), + ( #3306, #11156, #4430 ), + ( #12261, #5533, #13366 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.007035967796395568200, 0.007319481458783964000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8085845259241237800, 1.000000000000000000), + ( 1.000000000000000000, 0.8037303671282459700, 1.000000000000000000), + ( 1.000000000000000000, 0.7987533414942059600, 1.000000000000000000), + ( 1.000000000000000000, 0.7936517277408181600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8355 = CARTESIAN_POINT ( 'NONE', ( 34.07021572693975000, -23.15552079100452300, 12.26721313016727600 ) ) ; +#8356 = CARTESIAN_POINT ( 'NONE', ( 32.90329210053728600, -29.79495184287917600, 26.08823279147066600 ) ) ; +#8357 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999997900, -22.50000000000002100, 26.62899292861734700 ) ) ; +#8358 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#8359 = CARTESIAN_POINT ( 'NONE', ( 35.57485056132302500, -21.84839244267576700, -19.38787387434307900 ) ) ; +#8360 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -96.63409408015618900, 6.393917841143058400 ) ) ; +#8361 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -1.200000000000007500 ) ) ; +#8362 = CIRCLE ( 'NONE', #4980, 2.499999999999998700 ) ; +#8363 = DIRECTION ( 'NONE', ( 7.103262821921559300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8364 = CARTESIAN_POINT ( 'NONE', ( 34.98448064620325900, -29.24263929694188100, 24.26216435190902100 ) ) ; +#8365 = CARTESIAN_POINT ( 'NONE', ( 37.87392192486300500, -29.41526765223335700, 21.66148560243481200 ) ) ; +#8366 = PERSON_AND_ORGANIZATION ( #9068, #11176 ) ; +#8367 = CARTESIAN_POINT ( 'NONE', ( 28.58478233806718200, -20.05710331939554800, 21.92626554940634200 ) ) ; +#8368 = ORIENTED_EDGE ( 'NONE', *, *, #4461, .F. ) ; +#8369 = CARTESIAN_POINT ( 'NONE', ( 0.1720427470326487100, -7.500000000000000900, 21.30031871613076800 ) ) ; +#8370 = CARTESIAN_POINT ( 'NONE', ( 30.73921053143761000, -20.15927627075181100, 20.71297141186858000 ) ) ; +#8371 = CARTESIAN_POINT ( 'NONE', ( 9.635372563782413000, -30.53431467844133000, 27.41964448835628000 ) ) ; +#8372 = CARTESIAN_POINT ( 'NONE', ( 35.30170001996053500, -29.41157675799564300, 24.16939727339920200 ) ) ; +#8373 = CARTESIAN_POINT ( 'NONE', ( 35.51689328804241100, -94.86873859399392500, 9.066550904854974400 ) ) ; +#8374 = EDGE_CURVE ( 'NONE', #8423, #4019, #814, .T. ) ; +#8375 = CARTESIAN_POINT ( 'NONE', ( 26.14600010851210500, -94.74468260210099400, 18.43866987221308700 ) ) ; +#8376 = CARTESIAN_POINT ( 'NONE', ( 28.22376919364731100, -11.31600571511085100, 24.51557664052127800 ) ) ; +#8377 = CARTESIAN_POINT ( 'NONE', ( 10.46812316344313000, -20.27911212714009200, 21.44367878376440500 ) ) ; +#8378 = CARTESIAN_POINT ( 'NONE', ( 28.52296821348620900, -10.47423724657335600, 25.00000000000000000 ) ) ; +#8379 = CARTESIAN_POINT ( 'NONE', ( 6.156050543189512500, -30.27974733303189200, 25.63850381944389100 ) ) ; +#8380 = CARTESIAN_POINT ( 'NONE', ( 41.95159871840091600, -9.999999999999996400, 8.121579152406933800 ) ) ; +#8381 = CARTESIAN_POINT ( 'NONE', ( 16.53370078694410600, -12.49999999999999300, 9.941279551366486400 ) ) ; +#8382 = ORIENTED_EDGE ( 'NONE', *, *, #9530, .F. ) ; +#8383 = CARTESIAN_POINT ( 'NONE', ( -1.918268303300793500, -9.999999999999994700, 9.174250140956120300 ) ) ; +#8384 = CARTESIAN_POINT ( 'NONE', ( 30.97010601968589300, -30.61622596043700600, 27.16687852453663200 ) ) ; +#8385 = CARTESIAN_POINT ( 'NONE', ( 12.29739752783898200, -20.12133394300411700, 22.27701783342571000 ) ) ; +#8386 = CARTESIAN_POINT ( 'NONE', ( 7.902791958460371200, -30.03385608141514100, 26.60136410206174800 ) ) ; +#8387 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #7343, #5084, #714 ), + ( #8495, #1811, #9621 ), + ( #2914, #10756, #4024 ), + ( #11866, #5138, #12975 ), + ( #6263, #14076, #7404 ), + ( #765, #8548, #1869 ), + ( #9676, #2968, #10812 ), + ( #4081, #11917, #5193 ), + ( #13032, #6320, #14131 ), + ( #7460, #822, #8606 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.005158590850961208000, 0.007855257036072401200, 0.01055192322118359400, 0.01324858940629478600, 0.01594525559140597800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9676001123207133000, 1.000000000000000000), + ( 1.000000000000000000, 0.9620951803826390800, 1.000000000000000000), + ( 1.000000000000000000, 0.9518111696000599600, 1.000000000000000000), + ( 1.000000000000000000, 0.9234582952097845100, 1.000000000000000000), + ( 1.000000000000000000, 0.9054165179853078700, 1.000000000000000000), + ( 1.000000000000000000, 0.8631031804835264100, 1.000000000000000000), + ( 1.000000000000000000, 0.8388612616686721400, 1.000000000000000000), + ( 1.000000000000000000, 0.7852939264248821600, 1.000000000000000000), + ( 1.000000000000000000, 0.7562608118972779000, 1.000000000000000000), + ( 1.000000000000000000, 0.7258093592940146900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8388 = CARTESIAN_POINT ( 'NONE', ( 36.99901133815803400, -29.32084700181091800, 22.24098142819980200 ) ) ; +#8389 = CARTESIAN_POINT ( 'NONE', ( 37.03967402349233100, -99.99999999999998600, 17.45579128332459000 ) ) ; +#8390 = EDGE_CURVE ( 'NONE', #4265, #1408, #12632, .T. ) ; +#8391 = CARTESIAN_POINT ( 'NONE', ( 4.379286078182062200, -29.73739684795264500, 24.16187420691412100 ) ) ; +#8392 = CARTESIAN_POINT ( 'NONE', ( 12.62213864947538500, -33.12290826665375200, 27.89126696757162400 ) ) ; +#8393 = CARTESIAN_POINT ( 'NONE', ( 37.49933380663424000, -90.08414409138436000, -4.495944938627320500 ) ) ; +#8394 = CARTESIAN_POINT ( 'NONE', ( 39.67735505568865800, -11.29057977724533200, 9.738761650140848000 ) ) ; +#8395 = ORIENTED_EDGE ( 'NONE', *, *, #8956, .F. ) ; +#8396 = CARTESIAN_POINT ( 'NONE', ( 33.75470228449974300, -22.03500000000001400, 13.24771989091369300 ) ) ; +#8397 = CARTESIAN_POINT ( 'NONE', ( 29.55543930580621000, -30.88381435456656000, 27.66593321923554400 ) ) ; +#8398 = CARTESIAN_POINT ( 'NONE', ( 32.25567112787248200, -97.40649683660852500, 20.30013330860953900 ) ) ; +#8399 = CARTESIAN_POINT ( 'NONE', ( 11.76044685354238700, -9.781278341185187100, -24.99999999999999600 ) ) ; +#8400 = CARTESIAN_POINT ( 'NONE', ( 22.49264576486658000, -27.96523496585092200, 27.45710953202296900 ) ) ; +#8401 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -12.50000000000000200, -14.54982113999828100 ) ) ; +#8402 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 16.29999999999999700 ) ) ; +#8403 = ORIENTED_EDGE ( 'NONE', *, *, #6557, .T. ) ; +#8404 = CARTESIAN_POINT ( 'NONE', ( 34.89236673842411600, -12.49999999999876900, 11.76109114046235300 ) ) ; +#8405 = CARTESIAN_POINT ( 'NONE', ( 33.02265169935622400, -30.48249275647063100, 26.15544197647624000 ) ) ; +#8406 = CARTESIAN_POINT ( 'NONE', ( 28.23955314646849900, -10.21539878535277200, -25.03798061746947200 ) ) ; +#8407 = CARTESIAN_POINT ( 'NONE', ( 39.96147338300495000, 7.709542493230039800, 20.63080313393616200 ) ) ; +#8408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#8409 = CARTESIAN_POINT ( 'NONE', ( 17.14036683352856000, -12.50000000000079800, -22.94081749995136100 ) ) ; +#8410 = ORIENTED_EDGE ( 'NONE', *, *, #5428, .T. ) ; +#8411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8412 = CARTESIAN_POINT ( 'NONE', ( 35.81962980520388100, -29.04360507523417900, 23.17392359014283100 ) ) ; +#8413 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -99.99999999999998600, 21.63057173623876000 ) ) ; +#8414 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #860, #7500, #1954, #9769, #3062, #10906, #4171, #12009, #5278, #13122, #6414, #14218, #7548, #901, #8694, #2001, #9814, #3111, #10959, #4221, #12055, #5332, #13169, #6460, #14261, #7596, #948, #8736, #2049, #9862, #3153, #11003, #4274, #12102, #5373, #13213, #6504, #14304, #7642, #996, #8782, #2086, #9911, #3198, #11038, #4314, #12147, #5412, #13256, #6549, #14347, #7688, #1040, #8828, #2127, #9949, #3239, #11081, #4356, #12190, #5459, #13296, #6592, #14391, #7732, #1082, #8873, #2173, #9992, #3280, #11127 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 1, 1, 2, 2, 2, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 2, 1, 1, 2, 2, 2, 2, 1, 1, 2, 2, 2, 2, 2, 1, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.03124999999999870900, 0.04687499999999848000, 0.05468749999999873000, 0.05859374999999882000, 0.06054687499999924400, 0.06152343749999905600, 0.06249999999999887600, 0.09375000000000020800, 0.1093750000000007200, 0.1171875000000005800, 0.1210937500000004200, 0.1230468750000003200, 0.1250000000000002200, 0.1874999999999973100, 0.2187499999999954500, 0.2343749999999944500, 0.2421874999999934800, 0.2460937499999929200, 0.2480468749999929800, 0.2490234374999933900, 0.2499999999999938400, 0.3750000000000015000, 0.4375000000000055500, 0.4687500000000072700, 0.4843750000000083800, 0.4921875000000086000, 0.4960937500000087700, 0.5000000000000089900, 0.6250000000000114400, 0.6875000000000128800, 0.7187500000000137700, 0.7343750000000143200, 0.7421875000000144300, 0.7460937500000145400, 0.7480468750000147700, 0.7500000000000148800, 0.8125000000000102100, 0.8437500000000075500, 0.8593750000000064400, 0.8671875000000058800, 0.8750000000000053300, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#8415 = CARTESIAN_POINT ( 'NONE', ( 27.21181856175665800, -19.72716622846600700, 22.52275277623640900 ) ) ; +#8416 = VERTEX_POINT ( 'NONE', #10702 ) ; +#8417 = CARTESIAN_POINT ( 'NONE', ( 29.73256011354131800, -94.73833305799489300, 17.59190037867573900 ) ) ; +#8418 = DIRECTION ( 'NONE', ( 0.8879318508662167300, -0.4599750299932538500, 0.0000000000000000000 ) ) ; +#8419 = CARTESIAN_POINT ( 'NONE', ( 9.836113495154275900, -30.91204193729276600, 27.43441620753377900 ) ) ; +#8420 = CARTESIAN_POINT ( 'NONE', ( 35.53753133582409900, -30.50806084505804300, 24.18462474631886400 ) ) ; +#8421 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -96.23082734598841600, 5.350767952454917900 ) ) ; +#8422 = ADVANCED_FACE ( 'NONE', ( #12816 ), #11816, .F. ) ; +#8423 = VERTEX_POINT ( 'NONE', #14030 ) ; +#8424 = CARTESIAN_POINT ( 'NONE', ( 2.398385115085042600, -19.59544855180062200, 7.729933009512929100 ) ) ; +#8425 = CARTESIAN_POINT ( 'NONE', ( 6.497781307659003900, -31.16893502338438900, 25.37680195652748700 ) ) ; +#8426 = CARTESIAN_POINT ( 'NONE', ( 39.49736098093337900, -11.89222024128297800, 9.029927566193354200 ) ) ; +#8427 = CARTESIAN_POINT ( 'NONE', ( 12.83868403489759300, -24.11063024947523600, 19.09365262969520000 ) ) ; +#8428 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000001400, -97.04531648070941700, 16.23785755017193100 ) ) ; +#8429 = ORIENTED_EDGE ( 'NONE', *, *, #2626, .T. ) ; +#8430 = CARTESIAN_POINT ( 'NONE', ( 0.3674847919827233200, -9.999999999999998200, 11.65938215168129600 ) ) ; +#8431 = EDGE_CURVE ( 'NONE', #3483, #4276, #7266, .T. ) ; +#8432 = CARTESIAN_POINT ( 'NONE', ( 30.95716769247122700, -30.98179611036799800, 27.07273980012454100 ) ) ; +#8433 = CARTESIAN_POINT ( 'NONE', ( 5.894411339449976400, -28.81846823313759400, 25.07554503327167700 ) ) ; +#8434 = CARTESIAN_POINT ( 'NONE', ( 8.051084623852620600, -30.81926999808224500, 26.65111999035067200 ) ) ; +#8435 = CARTESIAN_POINT ( 'NONE', ( 36.70339930445458500, -30.48345820702195000, 22.03813023295833800 ) ) ; +#8436 = VERTEX_POINT ( 'NONE', #6219 ) ; +#8437 = EDGE_CURVE ( 'NONE', #6977, #13132, #9915, .T. ) ; +#8438 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -97.57596123493893000, 11.50239124669685800 ) ) ; +#8439 = CARTESIAN_POINT ( 'NONE', ( 4.814222297427772200, -31.00873036475949000, 23.74850098339618400 ) ) ; +#8440 = CARTESIAN_POINT ( 'NONE', ( 11.70754059864497900, -38.82060746691618600, 18.73907739207594500 ) ) ; +#8441 = CARTESIAN_POINT ( 'NONE', ( 40.53590439071391700, -95.07596123493894400, 4.526934840690924700 ) ) ; +#8442 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -20.68999999999999400 ) ) ; +#8443 = VERTEX_POINT ( 'NONE', #5427 ) ; +#8444 = CARTESIAN_POINT ( 'NONE', ( 30.80850665730461200, -100.0000000000000100, 3.447248114129469500 ) ) ; +#8445 = LINE ( 'NONE', #8402, #13832 ) ; +#8446 = CARTESIAN_POINT ( 'NONE', ( 29.24784765732320900, -30.75069611125433900, 27.79306815125331600 ) ) ; +#8447 = CARTESIAN_POINT ( 'NONE', ( 26.12797249531479000, -100.0000000000000700, 21.44942301341156800 ) ) ; +#8448 = CARTESIAN_POINT ( 'NONE', ( 27.12507152007545800, -10.94921598078055600, 24.83262761206874500 ) ) ; +#8449 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8450 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8451 = CARTESIAN_POINT ( 'NONE', ( 24.88871509871131200, -12.50000000000002000, 8.324773195445949600 ) ) ; +#8452 = ORIENTED_EDGE ( 'NONE', *, *, #10444, .F. ) ; +#8453 = CARTESIAN_POINT ( 'NONE', ( 32.90361272754110900, -31.16232121825363100, 25.84764239867757100 ) ) ; +#8454 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995600, -29.99960939767362700, 21.55805930029740500 ) ) ; +#8455 = CARTESIAN_POINT ( 'NONE', ( 29.07900043533569700, -9.937265368600305800, -24.99999999999999300 ) ) ; +#8456 = DIRECTION ( 'NONE', ( -0.5022820777495851100, 0.0000000000000000000, 0.8647038304365026700 ) ) ; +#8457 = CARTESIAN_POINT ( 'NONE', ( 17.08687855525923600, -12.50000000000002000, -14.51477406811736000 ) ) ; +#8458 = ORIENTED_EDGE ( 'NONE', *, *, #12026, .T. ) ; +#8459 = EDGE_CURVE ( 'NONE', #14018, #1461, #9876, .T. ) ; +#8460 = VECTOR ( 'NONE', #4165, 999.9999999999998900 ) ; +#8461 = CARTESIAN_POINT ( 'NONE', ( 14.67196184105237200, -16.98564320645473200, 23.72033111511837700 ) ) ; +#8462 = CARTESIAN_POINT ( 'NONE', ( 36.23088873122555500, -28.94718129512036600, 22.43576796298154700 ) ) ; +#8463 = CARTESIAN_POINT ( 'NONE', ( 25.77641315475633000, -19.43991669951345700, 22.98823970039353200 ) ) ; +#8464 = CARTESIAN_POINT ( 'NONE', ( 16.84019563750927200, -12.50000000000004600, 10.05032916439713400 ) ) ; +#8465 = ORIENTED_EDGE ( 'NONE', *, *, #6514, .T. ) ; +#8466 = CARTESIAN_POINT ( 'NONE', ( 0.008758982041380059300, -9.914758660855003600, 20.49337108212912300 ) ) ; +#8467 = CARTESIAN_POINT ( 'NONE', ( 2.201676994159581700, -18.80831803364682000, -11.64589097474311800 ) ) ; +#8468 = CARTESIAN_POINT ( 'NONE', ( 9.833468143807344600, -30.67443281289388700, 27.48454037594322900 ) ) ; +#8469 = CARTESIAN_POINT ( 'NONE', ( 35.01420887026554100, -29.23850774246384200, 24.23432695828518700 ) ) ; +#8470 = CARTESIAN_POINT ( 'NONE', ( 7.621950951096703600, -12.50000000000005300, 17.25994204638906400 ) ) ; +#8471 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -92.96541870103227700, 0.9151443176118839700 ) ) ; +#8472 = CARTESIAN_POINT ( 'NONE', ( 2.403177953888962400, -18.86733513214319700, 10.38103347014939700 ) ) ; +#8473 = CIRCLE ( 'NONE', #7282, 1.200000000000003100 ) ; +#8474 = EDGE_LOOP ( 'NONE', ( #3471, #8395, #13062, #5700 ) ) ; +#8475 = CARTESIAN_POINT ( 'NONE', ( 2.397656353075660300, -19.58888095731376200, 7.866690786067708000 ) ) ; +#8476 = CARTESIAN_POINT ( 'NONE', ( 35.09277647551545700, -28.61588495956356600, 23.00302379891385500 ) ) ; +#8477 = CARTESIAN_POINT ( 'NONE', ( 6.333057374205409900, -30.50605060336912200, 25.73049372550143200 ) ) ; +#8478 = CARTESIAN_POINT ( 'NONE', ( 36.23129239879070000, -18.64134286563692600, -18.67486007470936500 ) ) ; +#8479 = CARTESIAN_POINT ( 'NONE', ( 39.63250714642271800, -10.00000000000000000, 11.65942027701044400 ) ) ; +#8480 = CARTESIAN_POINT ( 'NONE', ( 12.92860684582297800, -12.49999999999988300, 21.19866700333308200 ) ) ; +#8481 = CARTESIAN_POINT ( 'NONE', ( 31.01459905535938700, -12.59634131048490200, -24.87288486841333700 ) ) ; +#8482 = EDGE_CURVE ( 'NONE', #4028, #4019, #12477, .T. ) ; +#8483 = CARTESIAN_POINT ( 'NONE', ( 1.944759644309744800, -11.88479855846368800, 15.08736559399423300 ) ) ; +#8484 = CARTESIAN_POINT ( 'NONE', ( 30.76493076585954300, -30.49421337655297400, 27.26035373727190600 ) ) ; +#8485 = CARTESIAN_POINT ( 'NONE', ( 8.381780683597570600, -26.96720257271036300, 18.94519405096552200 ) ) ; +#8486 = CARTESIAN_POINT ( 'NONE', ( 8.064048251809847300, -30.26235366129147800, 26.72363293390539200 ) ) ; +#8487 = CARTESIAN_POINT ( 'NONE', ( 36.32267987539813700, -29.05414054307356900, 22.60552948473672100 ) ) ; +#8488 = FACE_OUTER_BOUND ( 'NONE', #14005, .T. ) ; +#8489 = VERTEX_POINT ( 'NONE', #6566 ) ; +#8490 = CARTESIAN_POINT ( 'NONE', ( 4.135101042871572700, -94.52969920337886800, 7.491482714605302500 ) ) ; +#8491 = AXIS2_PLACEMENT_3D ( 'NONE', #12226, #37, #7777 ) ; +#8492 = CARTESIAN_POINT ( 'NONE', ( 4.377671638526101600, -30.09186609289624000, 24.29363185087459300 ) ) ; +#8493 = CARTESIAN_POINT ( 'NONE', ( 10.05478051384583100, -31.54315705787917100, 19.23894334179167100 ) ) ; +#8494 = CARTESIAN_POINT ( 'NONE', ( 31.95841674829079100, -95.07596123493894400, 6.647750091011163300 ) ) ; +#8495 = CARTESIAN_POINT ( 'NONE', ( 0.3720695471305529600, -11.21998241856431700, 10.67168808898894400 ) ) ; +#8496 = ORIENTED_EDGE ( 'NONE', *, *, #3773, .F. ) ; +#8497 = CARTESIAN_POINT ( 'NONE', ( 25.78987907430276700, -22.03500000000001400, 19.95824889004975900 ) ) ; +#8498 = CARTESIAN_POINT ( 'NONE', ( 29.24748447785404100, -30.83006684601882300, 27.77960117400566600 ) ) ; +#8499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8500 = ADVANCED_FACE ( 'NONE', ( #6856 ), #3571, .F. ) ; +#8501 = CARTESIAN_POINT ( 'NONE', ( 23.26568216881313600, -30.67945339673124400, 28.84385291352996800 ) ) ; +#8502 = CARTESIAN_POINT ( 'NONE', ( 2.515412406629693500, -29.82654460640751300, 21.58857427369697400 ) ) ; +#8503 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2899, #8481, #4011, #11848, #5123, #12959, #6250, #14061, #7386, #752, #8532, #1853, #9661, #2954 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.003151870213328193400, 0.005662068029190402800, 0.006917166937121509500, 0.008172265845052616200, 0.009427364752983722800, 0.01068246366091482900, 0.01319266147677705700 ), + .UNSPECIFIED. ) ; +#8504 = LINE ( 'NONE', #547, #8809 ) ; +#8505 = CARTESIAN_POINT ( 'NONE', ( 5.079484036836326800, -100.0000000000000300, -27.29038152329703900 ) ) ; +#8506 = CARTESIAN_POINT ( 'NONE', ( 34.68872924767023800, -22.88422157327544000, 10.32204881870260100 ) ) ; +#8507 = EDGE_CURVE ( 'NONE', #8587, #5132, #10953, .T. ) ; +#8508 = CARTESIAN_POINT ( 'NONE', ( 32.72436240303231600, -30.32786303472156300, 26.32767736295797800 ) ) ; +#8509 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999966700, -20.00069905418667200, -11.72603109299549100 ) ) ; +#8510 = CARTESIAN_POINT ( 'NONE', ( 29.71789906400966800, -11.08853774382525400, -25.04696043241429800 ) ) ; +#8511 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -5.703111534282318700, 32.34395275962862100 ) ) ; +#8512 = CARTESIAN_POINT ( 'NONE', ( 13.37607216901982300, -20.86111471166970300, -23.70425695546888500 ) ) ; +#8513 = VERTEX_POINT ( 'NONE', #14 ) ; +#8514 = CARTESIAN_POINT ( 'NONE', ( 5.664558295308419000, -7.560750906607403000, 25.00000000000000400 ) ) ; +#8515 = CARTESIAN_POINT ( 'NONE', ( 9.307359174008611900, -11.99261116098765400, -24.99999999999999600 ) ) ; +#8516 = CARTESIAN_POINT ( 'NONE', ( 11.98487419884252400, -10.15232558920095800, 24.97314088877156000 ) ) ; +#8517 = CARTESIAN_POINT ( 'NONE', ( 24.28854260627325700, -19.18338509579123000, 23.31273408730551100 ) ) ; +#8518 = CARTESIAN_POINT ( 'NONE', ( 15.18257917725516200, -24.20622422629366700, 19.77479197417661500 ) ) ; +#8519 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -97.26512727357703600, 8.543711005895062300 ) ) ; +#8520 = CARTESIAN_POINT ( 'NONE', ( 10.24082995048135700, -30.92217531904214000, 27.58368734276722400 ) ) ; +#8521 = CARTESIAN_POINT ( 'NONE', ( 35.44690532084105400, -30.25835062744038600, 24.45668493558695600 ) ) ; +#8522 = CARTESIAN_POINT ( 'NONE', ( 15.79136822044646000, -12.50000000000002300, 9.445733562929129700 ) ) ; +#8523 = CARTESIAN_POINT ( 'NONE', ( 8.779299259430624500, -19.11837654703482100, 20.63627947573650100 ) ) ; +#8524 = EDGE_CURVE ( 'NONE', #5132, #9639, #991, .T. ) ; +#8525 = ORIENTED_EDGE ( 'NONE', *, *, #9873, .F. ) ; +#8526 = CARTESIAN_POINT ( 'NONE', ( 2.499399451676698200, -20.40376412660285500, 7.926708866571475600 ) ) ; +#8527 = CARTESIAN_POINT ( 'NONE', ( 38.93128365257563000, -11.88768273487064600, 12.54862785709313600 ) ) ; +#8528 = CARTESIAN_POINT ( 'NONE', ( 6.490008805614876600, -29.65119876524191500, 25.65562469637787000 ) ) ; +#8529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8530 = CARTESIAN_POINT ( 'NONE', ( 40.27445241177088100, -10.00000000000000400, 16.06879692163966300 ) ) ; +#8531 = CARTESIAN_POINT ( 'NONE', ( 16.78557364003381000, -12.50000000000001200, 10.03413396459939700 ) ) ; +#8532 = CARTESIAN_POINT ( 'NONE', ( 36.17094689330640000, -12.11669939055925500, -21.48405616162218800 ) ) ; +#8533 = CARTESIAN_POINT ( 'NONE', ( 4.021497247512019000, -21.78617020302121800, -18.60566080042631400 ) ) ; +#8534 = CARTESIAN_POINT ( 'NONE', ( 4.305740388061009200, -10.00000000000000400, 22.49061275348312300 ) ) ; +#8535 = CARTESIAN_POINT ( 'NONE', ( 30.76894588439606400, -30.83080146353995600, 27.21038883509351400 ) ) ; +#8536 = CARTESIAN_POINT ( 'NONE', ( 5.689340439387036600, -21.42388897667326500, 17.15377118206944800 ) ) ; +#8537 = CARTESIAN_POINT ( 'NONE', ( 8.364021294057364400, -31.02354205100743600, 26.72004804863205900 ) ) ; +#8538 = CARTESIAN_POINT ( 'NONE', ( 37.00519451243238900, -30.13714599038932500, 22.41387703569868600 ) ) ; +#8539 = CARTESIAN_POINT ( 'NONE', ( 38.22152778587891900, -10.00000000000001400, -19.28939737522836500 ) ) ; +#8540 = AXIS2_PLACEMENT_3D ( 'NONE', #13977, #7295, #672 ) ; +#8541 = LINE ( 'NONE', #12881, #5882 ) ; +#8542 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5359, #3859, #11699 ), + ( #4964, #12804, #6092 ), + ( #13900, #7224, #596 ), + ( #8376, #1696, #9498 ), + ( #2791, #10632, #3911 ), + ( #11746, #5012, #12858 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.02063403140189285300, 0.02167161455191195900, 0.02270919770193106900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9887332271578431800, 1.000000000000000000), + ( 1.000000000000000000, 0.9871833546782496900, 1.000000000000000000), + ( 1.000000000000000000, 0.9836708456350757900, 1.000000000000000000), + ( 1.000000000000000000, 0.9748390238566813100, 1.000000000000000000), + ( 1.000000000000000000, 0.9695491355204641800, 1.000000000000000000), + ( 1.000000000000000000, 0.9636507673744035800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8543 = CARTESIAN_POINT ( 'NONE', ( 2.499999999994460000, -94.55768749322288600, 4.933039381727878600 ) ) ; +#8544 = ORIENTED_EDGE ( 'NONE', *, *, #6842, .F. ) ; +#8545 = CARTESIAN_POINT ( 'NONE', ( 4.833123355977285500, -29.19814601815964700, 24.05114458618825100 ) ) ; +#8546 = CARTESIAN_POINT ( 'NONE', ( 3.896254708293331400, -30.81666262191129800, 22.21904940088878900 ) ) ; +#8547 = CARTESIAN_POINT ( 'NONE', ( 27.36132247220995600, -89.25259502760219700, 10.23840046695556400 ) ) ; +#8548 = CARTESIAN_POINT ( 'NONE', ( -1.005755565015041500E-013, -9.690679280438661900, 15.97734612780444300 ) ) ; +#8549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669239200 ) ) ; +#8550 = CARTESIAN_POINT ( 'NONE', ( 29.14586072799789900, -30.74726536060853700, 27.82600897323518300 ) ) ; +#8551 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -99.99999999999998600, 21.63057173623876400 ) ) ; +#8552 = CARTESIAN_POINT ( 'NONE', ( 3.712791177853420600, -14.90592932397827200, -20.39698914555185300 ) ) ; +#8553 = CARTESIAN_POINT ( 'NONE', ( 39.53598901044963300, -11.85604395820142700, 8.092026661754028200 ) ) ; +#8554 = CARTESIAN_POINT ( 'NONE', ( 36.04607637941144600, -30.79351531525762600, 22.48107746317525000 ) ) ; +#8555 = EDGE_CURVE ( 'NONE', #13818, #11912, #984, .T. ) ; +#8556 = CARTESIAN_POINT ( 'NONE', ( 3.519597832273798000, -28.88244232793379100, 21.75504533814401500 ) ) ; +#8557 = FACE_OUTER_BOUND ( 'NONE', #988, .T. ) ; +#8558 = CARTESIAN_POINT ( 'NONE', ( 7.296162173107998900, -20.28809933266904900, -18.94805270209101900 ) ) ; +#8559 = CARTESIAN_POINT ( 'NONE', ( 35.12908541863060900, -12.49999999999907600, 9.185145223655427000 ) ) ; +#8560 = CARTESIAN_POINT ( 'NONE', ( 32.67483284973859300, -31.01609971878382100, 26.12378616790817200 ) ) ; +#8561 = APPROVAL_DATE_TIME ( #8735, #8007 ) ; +#8562 = ORIENTED_EDGE ( 'NONE', *, *, #3451, .F. ) ; +#8563 = CARTESIAN_POINT ( 'NONE', ( 30.37683261231866900, -11.97188369236831900, -24.99999999999998600 ) ) ; +#8564 = CARTESIAN_POINT ( 'NONE', ( 5.669007596045354100, -7.561019679538226500, 25.00000000000000000 ) ) ; +#8565 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, 9.500000000000000000, -19.99999999999999600 ) ) ; +#8566 = CARTESIAN_POINT ( 'NONE', ( 13.23023168712751000, -12.50000000000024900, -22.18975476244097300 ) ) ; +#8567 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9936, #8768, #12178, #5443 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.8725286227060772300, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#8568 = CARTESIAN_POINT ( 'NONE', ( 12.80237247857386500, -12.51900232018540700, 24.44961316460874900 ) ) ; +#8569 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999997900, -12.50000000000001600, 25.00105000000004600 ) ) ; +#8570 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -95.07596123493894400, 9.998812624573380600 ) ) ; +#8571 = CARTESIAN_POINT ( 'NONE', ( 22.26283722177088700, -19.94704473311937000, 23.24416372052910900 ) ) ; +#8572 = CARTESIAN_POINT ( 'NONE', ( 15.76989888997751000, -12.50000000000003600, 21.94188995382916100 ) ) ; +#8573 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -90.97335171977769600, -3.161179035379552400 ) ) ; +#8574 = CARTESIAN_POINT ( 'NONE', ( 9.435083275373573400, -16.56984214946406200, -26.15844042994615000 ) ) ; +#8575 = CARTESIAN_POINT ( 'NONE', ( 10.23986504855406400, -30.76397929228107500, 27.61946965772215600 ) ) ; +#8576 = CARTESIAN_POINT ( 'NONE', ( 35.01323174444111400, -31.05320463256369800, 23.91343585795870700 ) ) ; +#8577 = CARTESIAN_POINT ( 'NONE', ( 9.593455880411685400, -23.84342123308590900, 17.18866066611406400 ) ) ; +#8578 = ORIENTED_EDGE ( 'NONE', *, *, #3074, .F. ) ; +#8579 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, 5.300583124007070000, 20.22352373746559100 ) ) ; +#8580 = EDGE_CURVE ( 'NONE', #14193, #6101, #4249, .T. ) ; +#8581 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#8582 = ADVANCED_FACE ( 'NONE', ( #11616 ), #12867, .F. ) ; +#8583 = CARTESIAN_POINT ( 'NONE', ( 2.500753799149981700, -21.21849842500550300, 7.943174228204791000 ) ) ; +#8584 = CARTESIAN_POINT ( 'NONE', ( 28.29483758329247300, -11.87738373446314600, 24.28608352733121100 ) ) ; +#8585 = CARTESIAN_POINT ( 'NONE', ( 6.452521536093771100, -30.75445949347716000, 25.70631603697789600 ) ) ; +#8586 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13353, #5515, #7797, #1146, #8931, #2231, #10054, #3339 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001534810113869131500, 0.003069620227738263000, 0.006139240455476533900 ), + .UNSPECIFIED. ) ; +#8587 = VERTEX_POINT ( 'NONE', #1332 ) ; +#8588 = CARTESIAN_POINT ( 'NONE', ( 34.03894196319233600, -11.87969486833420900, 20.72160540739728800 ) ) ; +#8589 = DIRECTION ( 'NONE', ( 0.6910284383158341600, -0.7228275710283741400, 0.0000000000000000000 ) ) ; +#8590 = CARTESIAN_POINT ( 'NONE', ( 27.55362854606304500, -30.65936817474672100, 28.28565820427789000 ) ) ; +#8591 = CARTESIAN_POINT ( 'NONE', ( 39.78605989644044900, -10.85576041423818200, 10.71962051219045600 ) ) ; +#8592 = CARTESIAN_POINT ( 'NONE', ( 6.366339044569977900, -20.28704534712879600, -21.80399817851428800 ) ) ; +#8593 = CARTESIAN_POINT ( 'NONE', ( 8.260444105045959200, -9.999999999998161500, 23.12757070363797500 ) ) ; +#8594 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -14.31000000000000400 ) ) ; +#8595 = ORIENTED_EDGE ( 'NONE', *, *, #7913, .F. ) ; +#8596 = CARTESIAN_POINT ( 'NONE', ( 30.65851758947465600, -30.40837682907255200, 27.30218391758232600 ) ) ; +#8597 = CARTESIAN_POINT ( 'NONE', ( 2.618726982310705800, -28.38134424163849800, 15.78567252112049400 ) ) ; +#8598 = CARTESIAN_POINT ( 'NONE', ( 8.338703965695422900, -30.53558996282073000, 26.85935333984136600 ) ) ; +#8599 = CARTESIAN_POINT ( 'NONE', ( 36.04640507275850300, -28.99241107648848400, 22.80707312540323200 ) ) ; +#8600 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10063, #10157, #4553, #12387 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 2.327375768669318900E-017, 0.0007378879247095342100 ), + .UNSPECIFIED. ) ; +#8601 = ORIENTED_EDGE ( 'NONE', *, *, #12961, .F. ) ; +#8602 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -91.87365618056732300, -1.973424355171180300 ) ) ; +#8603 = EDGE_CURVE ( 'NONE', #5998, #10148, #477, .T. ) ; +#8604 = CARTESIAN_POINT ( 'NONE', ( 4.412848475097519000, -30.35697320094766400, 24.25452136784488700 ) ) ; +#8605 = CARTESIAN_POINT ( 'NONE', ( 4.476185070377354700, -34.50405460810586800, 13.02045795559681500 ) ) ; +#8606 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.511547099454120700, 20.00000000000004300 ) ) ; +#8607 = CARTESIAN_POINT ( 'NONE', ( 9.972140824079224000, -10.67829839517530400, -24.99999999999999600 ) ) ; +#8608 = CARTESIAN_POINT ( 'NONE', ( 29.14466227448317800, -30.81015805316740600, 27.81627899998084200 ) ) ; +#8609 = CARTESIAN_POINT ( 'NONE', ( 37.40660624268760200, -18.72241037074512000, -15.26664828240141100 ) ) ; +#8610 = CARTESIAN_POINT ( 'NONE', ( 24.10787804226718800, -28.81139146500374400, 29.17993098022221300 ) ) ; +#8611 = CARTESIAN_POINT ( 'NONE', ( 13.88391811981079900, -97.40634803306923600, 21.90682997063267800 ) ) ; +#8612 = EDGE_LOOP ( 'NONE', ( #2322, #13280, #10031, #2145, #13096, #9909, #11132, #10514 ) ) ; +#8613 = CARTESIAN_POINT ( 'NONE', ( 35.23442694625440900, -31.01510776069085300, 23.64659183321232000 ) ) ; +#8614 = CARTESIAN_POINT ( 'NONE', ( 2.818770984621602200, -30.19452881432873800, 21.59202769093921500 ) ) ; +#8615 = CARTESIAN_POINT ( 'NONE', ( 10.83977579956017400, -100.0000000000000300, -36.41976309893833300 ) ) ; +#8616 = CARTESIAN_POINT ( 'NONE', ( 32.49039228491297800, -30.06872330720076300, 26.40713090579642500 ) ) ; +#8617 = ORIENTED_EDGE ( 'NONE', *, *, #12592, .T. ) ; +#8618 = CARTESIAN_POINT ( 'NONE', ( 9.332931869232494300, -10.65702438076531200, 24.00350305883722500 ) ) ; +#8619 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8620 = CARTESIAN_POINT ( 'NONE', ( 16.38096682830441300, -12.50000000000000000, -14.27722723384412400 ) ) ; +#8621 = CARTESIAN_POINT ( 'NONE', ( 2.579904654838290700, -89.96976285135609400, -2.469206202559255800 ) ) ; +#8622 = CARTESIAN_POINT ( 'NONE', ( 14.57892411437048700, -16.22167649331114700, 23.90295056897920700 ) ) ; +#8623 = CARTESIAN_POINT ( 'NONE', ( 22.35960558233108800, -33.35446909076587500, 26.50697697917620100 ) ) ; +#8624 = CARTESIAN_POINT ( 'NONE', ( 12.63867752779217200, -89.25259502760197000, 10.23840046695651700 ) ) ; +#8625 = ORIENTED_EDGE ( 'NONE', *, *, #11298, .T. ) ; +#8626 = CARTESIAN_POINT ( 'NONE', ( 39.94266130668880500, -7.500000000000142100, 20.87443369176265400 ) ) ; +#8627 = CARTESIAN_POINT ( 'NONE', ( 13.08378053605940200, -13.37768706406108700, -25.59557736178393800 ) ) ; +#8628 = CARTESIAN_POINT ( 'NONE', ( 10.24083338774512300, -30.61533258903316900, 27.63776911376980600 ) ) ; +#8629 = CARTESIAN_POINT ( 'NONE', ( 35.26958922736236700, -30.02459183725159500, 24.60836701265078100 ) ) ; +#8630 = ORIENTED_EDGE ( 'NONE', *, *, #2664, .T. ) ; +#8631 = CARTESIAN_POINT ( 'NONE', ( 13.99953127095436900, -20.01384545781222700, 22.81373943744310400 ) ) ; +#8632 = CARTESIAN_POINT ( 'NONE', ( 11.35365508796065000, -28.14441943533005400, 26.49567723797691000 ) ) ; +#8633 = CARTESIAN_POINT ( 'NONE', ( 2.198830326998772600, -18.79526924676788000, 8.009735034351217900 ) ) ; +#8634 = CARTESIAN_POINT ( 'NONE', ( 4.614058260180594400, -10.00125988226238500, 22.59360147182572800 ) ) ; +#8635 = CARTESIAN_POINT ( 'NONE', ( 6.494168469293681400, -29.93963824584304600, 25.78922215309295800 ) ) ; +#8636 = CARTESIAN_POINT ( 'NONE', ( 22.53367588088661600, -19.90758453215376300, 23.25310724686146100 ) ) ; +#8637 = CARTESIAN_POINT ( 'NONE', ( 31.73953940285454000, -10.00000000000460800, 23.12758309589328900 ) ) ; +#8638 = ORIENTED_EDGE ( 'NONE', *, *, #4520, .F. ) ; +#8639 = AXIS2_PLACEMENT_3D ( 'NONE', #3832, #11675, #4938 ) ; +#8640 = CARTESIAN_POINT ( 'NONE', ( 24.57071173932336100, -39.41424078494628000, 19.70383002183626400 ) ) ; +#8641 = CARTESIAN_POINT ( 'NONE', ( 12.36721870648936100, -9.999999999999964500, 25.00000000000000000 ) ) ; +#8642 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#8643 = CARTESIAN_POINT ( 'NONE', ( 9.491967614849192700, -18.48708116200248600, -25.01679663191446300 ) ) ; +#8644 = CARTESIAN_POINT ( 'NONE', ( 12.71027321742975500, -11.87722406363206300, 24.59349866777931500 ) ) ; +#8645 = CIRCLE ( 'NONE', #15, 2.499999999999999100 ) ; +#8646 = CARTESIAN_POINT ( 'NONE', ( 4.672760298540269200, -95.07595987345648300, 12.92966076384161200 ) ) ; +#8647 = ORIENTED_EDGE ( 'NONE', *, *, #6394, .F. ) ; +#8648 = CARTESIAN_POINT ( 'NONE', ( 30.67144414743419700, -30.73513483098344800, 27.27528004944085900 ) ) ; +#8649 = FACE_OUTER_BOUND ( 'NONE', #4173, .T. ) ; +#8650 = CARTESIAN_POINT ( 'NONE', ( 2.590528255189209300, -26.72171741375203500, 8.782085645841982900 ) ) ; +#8651 = CARTESIAN_POINT ( 'NONE', ( 8.469298479145726000, -31.08679095229123500, 26.74049830775561200 ) ) ; +#8652 = CARTESIAN_POINT ( 'NONE', ( 36.92073923668809200, -29.84275347219121200, 22.70149734946847500 ) ) ; +#8653 = EDGE_CURVE ( 'NONE', #11427, #6439, #381, .T. ) ; +#8654 = CARTESIAN_POINT ( 'NONE', ( 4.799973471287091600, -29.26833239984922500, 24.10421623828059300 ) ) ; +#8655 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4247, #3133, #9748, #12079 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.005000000000000004400 ), + .UNSPECIFIED. ) ; +#8656 = DIRECTION ( 'NONE', ( -8.673617379884033500E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8657 = CARTESIAN_POINT ( 'NONE', ( 22.43866206969477900, -30.66176281334873400, 28.85677374700786000 ) ) ; +#8658 = CARTESIAN_POINT ( 'NONE', ( 35.87988219061551800, -20.19333075283642700, -18.52772891521386000 ) ) ; +#8659 = CARTESIAN_POINT ( 'NONE', ( 27.19363392469141900, -12.53071712355589500, 24.44768521239457100 ) ) ; +#8660 = ADVANCED_FACE ( 'NONE', ( #7590 ), #10413, .T. ) ; +#8661 = CARTESIAN_POINT ( 'NONE', ( 4.780000885119427800, -100.0000000000000000, 18.51517745284062900 ) ) ; +#8662 = EDGE_LOOP ( 'NONE', ( #1560, #9961, #4492, #795 ) ) ; +#8663 = CARTESIAN_POINT ( 'NONE', ( 34.32671959635308700, -31.13248816090293400, 24.63435899110065100 ) ) ; +#8664 = CARTESIAN_POINT ( 'NONE', ( 3.124619835733479800, -29.06822536118107100, 21.79044128593281100 ) ) ; +#8665 = VECTOR ( 'NONE', #4133, 1000.000000000000000 ) ; +#8666 = CARTESIAN_POINT ( 'NONE', ( 16.66663500514976400, -20.28809933266904900, -24.31406949255821800 ) ) ; +#8667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#8668 = CARTESIAN_POINT ( 'NONE', ( 32.53283623895407600, -30.75405649118251400, 26.35990659187480400 ) ) ; +#8669 = VERTEX_POINT ( 'NONE', #5803 ) ; +#8670 = CARTESIAN_POINT ( 'NONE', ( 0.06906949602322048900, -10.27627798409282200, 11.21404478938948300 ) ) ; +#8671 = CARTESIAN_POINT ( 'NONE', ( 11.52768764050275200, -20.97564057540843400, -22.88810434658702800 ) ) ; +#8672 = CARTESIAN_POINT ( 'NONE', ( 2.960312666916085500, -99.99999999999998600, 17.45616585259673300 ) ) ; +#8673 = EDGE_CURVE ( 'NONE', #8416, #14211, #2686, .T. ) ; +#8674 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11813, #8348, #1816, #9625, #2917, #10760, #4027, #11869, #5142, #12979, #6266, #14080, #7408, #768, #8551 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 4 ), + ( 0.09290921277399487300, 0.3196819095804963000, 0.4330682579837469300, 0.4897614321853722100, 0.5464546063869975000, 0.6598409547902481800, 0.7732273031934987500, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#8675 = CIRCLE ( 'NONE', #13826, 2.499999999999998200 ) ; +#8676 = CARTESIAN_POINT ( 'NONE', ( 2.364622471090066700, -95.07596123493894400, 8.991554784010963500 ) ) ; +#8677 = ORIENTED_EDGE ( 'NONE', *, *, #6783, .T. ) ; +#8678 = CARTESIAN_POINT ( 'NONE', ( 15.09082827958949700, -97.51410528542926700, 21.98900951091981100 ) ) ; +#8679 = CARTESIAN_POINT ( 'NONE', ( 22.56735793044446200, -19.89245156580286900, 23.25569388360169800 ) ) ; +#8680 = CARTESIAN_POINT ( 'NONE', ( 12.58359595370159000, -11.87724389807648300, 24.55522993379390700 ) ) ; +#8681 = CARTESIAN_POINT ( 'NONE', ( 2.579948378423424100, -12.99467844005959800, -19.31914476449040300 ) ) ; +#8682 = CARTESIAN_POINT ( 'NONE', ( 10.44477683382632400, -30.80689183469695900, 27.68265672355383300 ) ) ; +#8683 = CARTESIAN_POINT ( 'NONE', ( 34.98626697690671300, -30.95421060033566400, 24.17043919227129900 ) ) ; +#8684 = ORIENTED_EDGE ( 'NONE', *, *, #7019, .F. ) ; +#8685 = AXIS2_PLACEMENT_3D ( 'NONE', #5498, #13337, #6631 ) ; +#8686 = CARTESIAN_POINT ( 'NONE', ( 2.504506587315169500, -27.59921077486879100, 9.242619021003118700 ) ) ; +#8687 = CARTESIAN_POINT ( 'NONE', ( 13.08773601239658600, -20.87509063716994000, -23.60533924839066000 ) ) ; +#8688 = CARTESIAN_POINT ( 'NONE', ( 2.398089308040374200, -19.58552467583980300, 8.063388378771037400 ) ) ; +#8689 = CARTESIAN_POINT ( 'NONE', ( 6.710888507955174600, -31.05974407308216500, 25.65978668155315400 ) ) ; +#8690 = CARTESIAN_POINT ( 'NONE', ( 9.334551254459391600, -19.66768941361404900, -24.66677604548170100 ) ) ; +#8691 = LINE ( 'NONE', #7367, #10581 ) ; +#8692 = CARTESIAN_POINT ( 'NONE', ( 27.98070162644572200, -10.00000000000000000, 26.91399514444756800 ) ) ; +#8693 = CARTESIAN_POINT ( 'NONE', ( 30.08018779747261500, -32.73480565852705800, 26.98692659285418600 ) ) ; +#8694 = CARTESIAN_POINT ( 'NONE', ( 3.839790934339791600, -28.96468637394876900, 22.58530848108043900 ) ) ; +#8695 = CARTESIAN_POINT ( 'NONE', ( 8.910573860492609900, -99.99999999999995700, 3.157855994976439100 ) ) ; +#8696 = EDGE_CURVE ( 'NONE', #11515, #10006, #12125, .T. ) ; +#8697 = CARTESIAN_POINT ( 'NONE', ( 12.75260220882864500, -22.40167589177618300, -26.41253700991159900 ) ) ; +#8698 = CARTESIAN_POINT ( 'NONE', ( 37.91705768589074000, -11.91160897348692800, -18.88534782946023000 ) ) ; +#8699 = ORIENTED_EDGE ( 'NONE', *, *, #13556, .T. ) ; +#8700 = CARTESIAN_POINT ( 'NONE', ( 30.65783876529617700, -31.01025919104577300, 27.19445031737493000 ) ) ; +#8701 = CARTESIAN_POINT ( 'NONE', ( 8.435340247158118000, -30.66117928230106000, 26.88828878959662600 ) ) ; +#8702 = CARTESIAN_POINT ( 'NONE', ( 36.04805954631139300, -30.79448617642307400, 22.48876672890905200 ) ) ; +#8703 = CARTESIAN_POINT ( 'NONE', ( 23.62264938358687200, -12.50000000000001200, -14.28155173294832600 ) ) ; +#8704 = CARTESIAN_POINT ( 'NONE', ( 4.726516422768198400, -30.72797623446315300, 24.21378389267010800 ) ) ; +#8705 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.53410555349849200, 14.05305117489778200 ) ) ; +#8706 = CARTESIAN_POINT ( 'NONE', ( 33.76995683160752300, -22.05246847186120400, -21.95806808492932700 ) ) ; +#8707 = CARTESIAN_POINT ( 'NONE', ( 36.45103112106843200, -28.87109882893306400, 21.75743724661850800 ) ) ; +#8708 = CARTESIAN_POINT ( 'NONE', ( 27.72536640239614400, -30.95376382138832500, 28.19014991409403200 ) ) ; +#8709 = CARTESIAN_POINT ( 'NONE', ( 32.47074095602473400, -31.14832843457625000, 26.15317506609098800 ) ) ; +#8710 = CARTESIAN_POINT ( 'NONE', ( 3.379786736793507300, -30.50266657984071700, 21.60013059453011400 ) ) ; +#8711 = CARTESIAN_POINT ( 'NONE', ( 12.58359595370155600, -11.87724389807649100, 24.55522993379390000 ) ) ; +#8712 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -94.58996440013442000, 19.12511856848663800 ) ) ; +#8713 = EDGE_CURVE ( 'NONE', #2787, #5991, #3702, .T. ) ; +#8714 = CARTESIAN_POINT ( 'NONE', ( 32.09449874244440800, -30.01979877928055300, 26.59907522079716100 ) ) ; +#8715 = CARTESIAN_POINT ( 'NONE', ( 3.423808512150154000, -21.66605256600471200, -17.11151254823438700 ) ) ; +#8716 = CARTESIAN_POINT ( 'NONE', ( 11.54737317579290600, -12.49999999999980500, -21.43462484728831200 ) ) ; +#8717 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#8718 = CARTESIAN_POINT ( 'NONE', ( 37.79839571336986400, -18.80694826461790100, -11.70378783570188700 ) ) ; +#8719 = CARTESIAN_POINT ( 'NONE', ( 9.261594602612554200, -94.73578216445807200, 17.24533615098927400 ) ) ; +#8720 = CARTESIAN_POINT ( 'NONE', ( 38.35330670124056200, -10.13145910719487500, -18.98029328923514900 ) ) ; +#8721 = ORIENTED_EDGE ( 'NONE', *, *, #9481, .T. ) ; +#8722 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8723 = CARTESIAN_POINT ( 'NONE', ( 10.44437317371141700, -30.67977927595944400, 27.70177889466272300 ) ) ; +#8724 = CARTESIAN_POINT ( 'NONE', ( 34.78956638731955300, -29.66424072320169400, 24.79290053027849100 ) ) ; +#8725 = CARTESIAN_POINT ( 'NONE', ( 17.56239422145299800, -31.29661376143278100, 28.74483239613229900 ) ) ; +#8726 = CARTESIAN_POINT ( 'NONE', ( 5.796813180185221600, -21.88856368658077400, -16.35666052816329600 ) ) ; +#8727 = DIRECTION ( 'NONE', ( 0.5022676430279096000, 0.0000000000000000000, 0.8647122149982550100 ) ) ; +#8728 = ADVANCED_FACE ( 'NONE', ( #1661 ), #8294, .T. ) ; +#8729 = CARTESIAN_POINT ( 'NONE', ( 2.503262712096808500, -20.38644109430019200, 8.301896896104183900 ) ) ; +#8730 = CARTESIAN_POINT ( 'NONE', ( 6.612595172599466900, -30.31503708529879000, 25.93851963231797700 ) ) ; +#8731 = CARTESIAN_POINT ( 'NONE', ( 15.88529352734861400, -19.12996383758022000, -26.60985895745792700 ) ) ; +#8732 = CYLINDRICAL_SURFACE ( 'NONE', #5280, 2.500000000000000000 ) ; +#8733 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.520606794341276200, 25.00000000000000000 ) ) ; +#8734 = CARTESIAN_POINT ( 'NONE', ( 29.54486220709714000, -31.59160329851200900, 19.44972132372786800 ) ) ; +#8735 = DATE_AND_TIME ( #8904, #9056 ) ; +#8736 = CARTESIAN_POINT ( 'NONE', ( 4.665154157098470500, -29.15758216515846300, 23.84640238373436500 ) ) ; +#8737 = CARTESIAN_POINT ( 'NONE', ( -2.757976880125086600E-015, -97.08226426698121300, 19.60648073883276900 ) ) ; +#8738 = ORIENTED_EDGE ( 'NONE', *, *, #6745, .T. ) ; +#8739 = CARTESIAN_POINT ( 'NONE', ( 16.66872292011037600, -20.43419133120850600, -26.84829652440358300 ) ) ; +#8740 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 12.00000000000000000, 20.00000000000000400 ) ) ; +#8741 = CARTESIAN_POINT ( 'NONE', ( 30.36946338982037500, -30.69075362960139600, 27.40517157384309100 ) ) ; +#8742 = CARTESIAN_POINT ( 'NONE', ( 24.15181345144133800, -100.0000000000000300, -38.28544755900107100 ) ) ; +#8743 = CARTESIAN_POINT ( 'NONE', ( 8.469205839859444800, -30.17321880090236500, 26.90178936537766000 ) ) ; +#8744 = CARTESIAN_POINT ( 'NONE', ( 36.41374015875510400, -29.59096624457657000, 23.20577712127135300 ) ) ; +#8745 = VECTOR ( 'NONE', #2321, 1000.000000000000000 ) ; +#8746 = CARTESIAN_POINT ( 'NONE', ( 4.726498738448006200, -29.64550126736302400, 24.40465233931758200 ) ) ; +#8747 = ORIENTED_EDGE ( 'NONE', *, *, #7746, .F. ) ; +#8748 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10251, #10207, #11387, #4655, #12495, #5780, #13589 ), + .UNSPECIFIED., .F., .F., + ( 4, 3, 4 ), + ( 0.0000000000000000000, 5.176522914216124200E-005, 0.0001022747012606463300 ), + .UNSPECIFIED. ) ; +#8749 = CARTESIAN_POINT ( 'NONE', ( 30.06873371462944900, -18.48041528191048100, -25.28139714515272700 ) ) ; +#8750 = CARTESIAN_POINT ( 'NONE', ( 37.43340352141105900, -29.48973422075583200, 21.64835419402683000 ) ) ; +#8751 = CARTESIAN_POINT ( 'NONE', ( 20.78685894211718800, -33.38451246544984500, 26.50167952162423300 ) ) ; +#8752 = CARTESIAN_POINT ( 'NONE', ( 31.19171950873180800, -31.05902626053012100, 26.92579193030635300 ) ) ; +#8753 = EDGE_CURVE ( 'NONE', #10148, #12235, #3355, .T. ) ; +#8754 = CARTESIAN_POINT ( 'NONE', ( 2.612196480420766200, -29.46140483444452200, 21.78462582118030600 ) ) ; +#8755 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561061092300, 7.000000000000000900, 20.69000000000000100 ) ) ; +#8756 = CARTESIAN_POINT ( 'NONE', ( 32.15420243050421300, -30.61575127512874400, 26.60643674220263900 ) ) ; +#8757 = CARTESIAN_POINT ( 'NONE', ( 12.57644042327373100, -22.39901803180502100, -26.37733486635551100 ) ) ; +#8758 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.3228370549872322000, -0.9464545609416074000 ) ) ; +#8759 = CARTESIAN_POINT ( 'NONE', ( 16.11909486383769900, -12.50000000000000700, -14.12085128625688300 ) ) ; +#8760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#8761 = VERTEX_POINT ( 'NONE', #8273 ) ; +#8762 = AXIS2_PLACEMENT_3D ( 'NONE', #3192, #11034, #4310 ) ; +#8763 = CARTESIAN_POINT ( 'NONE', ( 17.61130174692045000, -25.52353201642540600, 22.26278246961263500 ) ) ; +#8764 = CARTESIAN_POINT ( 'NONE', ( 5.600092860056775200, -93.12913979838573700, 20.11540945928316800 ) ) ; +#8765 = ORIENTED_EDGE ( 'NONE', *, *, #9982, .F. ) ; +#8766 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999850100, -10.00000000000068200, -18.40410801890481800 ) ) ; +#8767 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#8768 = CARTESIAN_POINT ( 'NONE', ( 17.48964004966522600, -19.90792438515222100, 23.25296560807840200 ) ) ; +#8769 = CARTESIAN_POINT ( 'NONE', ( 10.75199807547556400, -30.84828003476950200, 27.77577752268882000 ) ) ; +#8770 = CARTESIAN_POINT ( 'NONE', ( 34.88447597340053400, -30.65214828659840800, 24.71862484281585600 ) ) ; +#8771 = CARTESIAN_POINT ( 'NONE', ( 39.98583107952735800, 8.388284189408853600, -20.39445895443062900 ) ) ; +#8772 = EDGE_CURVE ( 'NONE', #11929, #2597, #285, .T. ) ; +#8773 = CARTESIAN_POINT ( 'NONE', ( 33.93114599456682600, -30.57865126448569600, 25.51741037074054600 ) ) ; +#8774 = CARTESIAN_POINT ( 'NONE', ( 37.49944835869821000, -21.21984131747930000, 7.920870232712987400 ) ) ; +#8775 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8776 = VERTEX_POINT ( 'NONE', #6043 ) ; +#8777 = CARTESIAN_POINT ( 'NONE', ( 2.529877900487977900, -21.14863562263514400, 8.795923499083173200 ) ) ; +#8778 = CARTESIAN_POINT ( 'NONE', ( 37.41397862648698700, -9.999999999999998200, 20.65015935806907200 ) ) ; +#8779 = CARTESIAN_POINT ( 'NONE', ( 6.835806018209500400, -31.16809518198737500, 25.64926969790999000 ) ) ; +#8780 = CARTESIAN_POINT ( 'NONE', ( 16.82967929295448800, -21.96701305158815400, -27.11010728131115100 ) ) ; +#8781 = CARTESIAN_POINT ( 'NONE', ( 32.78045417632228000, -37.14213175123546100, 16.08620130053796900 ) ) ; +#8782 = CARTESIAN_POINT ( 'NONE', ( 6.403123594344373600, -29.60327696753660800, 25.57312475063721600 ) ) ; +#8783 = CARTESIAN_POINT ( 'NONE', ( 17.50735423513289000, -27.96523496585093200, 27.45710953202296500 ) ) ; +#8784 = VERTEX_POINT ( 'NONE', #8324 ) ; +#8785 = AXIS2_PLACEMENT_3D ( 'NONE', #6356, #14164, #7492 ) ; +#8786 = CARTESIAN_POINT ( 'NONE', ( 37.80230676277619800, -18.79674186849294100, 7.760431212124075300 ) ) ; +#8787 = CARTESIAN_POINT ( 'NONE', ( 30.36246551425643500, -30.96330991497050200, 27.33852334822568200 ) ) ; +#8788 = CARTESIAN_POINT ( 'NONE', ( 29.82171378888968900, -20.28809933267076800, -21.90983746255191300 ) ) ; +#8789 = CARTESIAN_POINT ( 'NONE', ( 8.635663590410805700, -30.79511458925329500, 26.95107178455474900 ) ) ; +#8790 = CARTESIAN_POINT ( 'NONE', ( 36.03268268450698700, -30.73465670965291700, 22.92151438880497600 ) ) ; +#8791 = ORIENTED_EDGE ( 'NONE', *, *, #7232, .T. ) ; +#8792 = EDGE_CURVE ( 'NONE', #5768, #10377, #3057, .T. ) ; +#8793 = CARTESIAN_POINT ( 'NONE', ( 5.067205876215281200, -31.02001430627558800, 24.10596644768526900 ) ) ; +#8794 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -97.04531648070918900, 16.23785755017282600 ) ) ; +#8795 = VERTEX_POINT ( 'NONE', #12747 ) ; +#8796 = CIRCLE ( 'NONE', #13966, 2.500000000000002700 ) ; +#8797 = CARTESIAN_POINT ( 'NONE', ( 27.15390501563938800, -20.41211427132774100, -26.09304004933577300 ) ) ; +#8798 = ADVANCED_FACE ( 'NONE', ( #3052 ), #12795, .F. ) ; +#8799 = CARTESIAN_POINT ( 'NONE', ( 10.77332215714922200, -10.99826822166327700, 24.34620989765989000 ) ) ; +#8800 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457636700, -30.82655086342985500, 27.93782961424069800 ) ) ; +#8801 = CARTESIAN_POINT ( 'NONE', ( 3.602242522821283100, -30.60770003047398900, 21.70080942164860400 ) ) ; +#8802 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999997200, -94.54406934440207500, 19.57758955819930700 ) ) ; +#8803 = VERTEX_POINT ( 'NONE', #10575 ) ; +#8804 = CARTESIAN_POINT ( 'NONE', ( 32.09434328341438200, -31.12752047918167600, 26.40346766687494200 ) ) ; +#8805 = CARTESIAN_POINT ( 'NONE', ( 29.51694775731745700, -10.78590725346261400, -25.04035538763661300 ) ) ; +#8806 = CARTESIAN_POINT ( 'NONE', ( 9.761682783546154600, -21.13647953928125700, -21.73998424875951200 ) ) ; +#8807 = ORIENTED_EDGE ( 'NONE', *, *, #8673, .F. ) ; +#8808 = CARTESIAN_POINT ( 'NONE', ( 8.713203435596410500, -99.99999999999998600, -40.86942826376122200 ) ) ; +#8809 = VECTOR ( 'NONE', #7162, 1000.000000000000000 ) ; +#8810 = EDGE_CURVE ( 'NONE', #13026, #11692, #8819, .T. ) ; +#8811 = CARTESIAN_POINT ( 'NONE', ( 3.756867239339292100, -97.42181713028702500, 18.37434326604851600 ) ) ; +#8812 = DIRECTION ( 'NONE', ( 0.02203124760618845700, -0.9997572826085914200, 0.0000000000000000000 ) ) ; +#8813 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8814 = CARTESIAN_POINT ( 'NONE', ( 10.75235724027549500, -30.76913090077174900, 27.79026021262138700 ) ) ; +#8815 = CARTESIAN_POINT ( 'NONE', ( 34.47476787256058400, -29.39860620384708400, 24.82214393424963800 ) ) ; +#8816 = CARTESIAN_POINT ( 'NONE', ( 23.97500606257331800, -24.22451645667339500, 19.90491357604289000 ) ) ; +#8817 = CARTESIAN_POINT ( 'NONE', ( 33.66767245550161600, -29.58537226057402600, 25.51697004969764400 ) ) ; +#8818 = DIRECTION ( 'NONE', ( -0.9981804626610396600, -0.06029729647167255500, 1.699960087427756500E-014 ) ) ; +#8819 = CIRCLE ( 'NONE', #7594, 2.499999999999996900 ) ; +#8820 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.933460777237643900E-030, -8.455125032494987100E-015 ) ) ; +#8821 = ORIENTED_EDGE ( 'NONE', *, *, #2930, .T. ) ; +#8822 = CARTESIAN_POINT ( 'NONE', ( 2.400463151372703500, -18.85349695102388200, 10.39387975648236000 ) ) ; +#8823 = CARTESIAN_POINT ( 'NONE', ( 37.63399613019395000, -10.00577354972623900, 20.10430461088507000 ) ) ; +#8824 = CIRCLE ( 'NONE', #9176, 5.000000000000000900 ) ; +#8825 = CARTESIAN_POINT ( 'NONE', ( 6.696707417806386800, -30.51248504530903500, 25.97603522840243800 ) ) ; +#8826 = CARTESIAN_POINT ( 'NONE', ( 17.42649082925215600, -19.89845033991126800, 23.25457520830295300 ) ) ; +#8827 = CARTESIAN_POINT ( 'NONE', ( 37.11764230977187400, -29.76299867617902700, 18.89891774503424000 ) ) ; +#8828 = CARTESIAN_POINT ( 'NONE', ( 8.770262870948853300, -30.25197150123054600, 27.04845748218016200 ) ) ; +#8829 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#8830 = EDGE_LOOP ( 'NONE', ( #6814, #4449, #4602, #8452 ) ) ; +#8831 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8913, #1125, #3321, #11170 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.5088892147902976900 ), + .UNSPECIFIED. ) ; +#8832 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.09225471782765900, 9.459909491730003900 ) ) ; +#8833 = CARTESIAN_POINT ( 'NONE', ( 37.49959283435436700, -21.22226138883163700, 7.903137774079761300 ) ) ; +#8834 = CARTESIAN_POINT ( 'NONE', ( 30.16518497404035800, -30.62116156193467000, 27.49041051564601500 ) ) ; +#8835 = CARTESIAN_POINT ( 'NONE', ( 33.14431205699790400, -100.0000000000000300, -32.32580780564052200 ) ) ; +#8836 = CARTESIAN_POINT ( 'NONE', ( 8.650077461052321200, -30.32196886381965200, 27.00269084573871600 ) ) ; +#8837 = CARTESIAN_POINT ( 'NONE', ( 35.90031210266640500, -29.23893596072131700, 23.39535504852901200 ) ) ; +#8838 = FACE_OUTER_BOUND ( 'NONE', #11597, .T. ) ; +#8839 = ORIENTED_EDGE ( 'NONE', *, *, #13768, .T. ) ; +#8840 = EDGE_CURVE ( 'NONE', #12235, #3032, #658, .T. ) ; +#8841 = CARTESIAN_POINT ( 'NONE', ( 4.720176474034372100, -30.06601508879728300, 24.61005532296653100 ) ) ; +#8842 = CARTESIAN_POINT ( 'NONE', ( 23.34867005759063800, -22.46300697935469500, -27.20638857554416700 ) ) ; +#8843 = CARTESIAN_POINT ( 'NONE', ( 16.14443273699626900, -33.31992328562390100, 26.50879855998183700 ) ) ; +#8844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8845 = CARTESIAN_POINT ( 'NONE', ( 2.536644290958041100, -29.81162829743150100, 21.83297609588966600 ) ) ; +#8846 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #567, #13868, #10595 ), + ( #3873, #11711, #4976 ), + ( #12817, #6103, #13908 ), + ( #7235, #608, #8385 ), + ( #1706, #9511, #2802 ), + ( #10641, #3922, #11758 ), + ( #5023, #12869, #6154 ), + ( #13961, #7278, #655 ), + ( #8433, #1750, #9559 ), + ( #2850, #10686, #3965 ), + ( #11802, #5075, #12914 ), + ( #6208, #14012, #7333 ), + ( #705, #8485, #1803 ), + ( #9612, #2906, #10746 ), + ( #4016, #11854, #5128 ), + ( #12966, #6256, #14068 ), + ( #7394, #756, #8536 ), + ( #1859, #9667, #2961 ), + ( #10802, #4072, #11908 ), + ( #5183, #13023, #6311 ), + ( #14123, #7453, #815 ), + ( #8597, #1909, #9724 ), + ( #3014, #10861, #4126 ), + ( #11965, #5236, #13075 ), + ( #6368, #14175, #7506 ), + ( #867, #8650, #1960 ), + ( #9774, #3068, #10912 ), + ( #4179, #12015, #5287 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.005285763726982971000, 0.007273782968717967300, 0.009261802210452963600, 0.01323784069392295800, 0.01423185031479045500, 0.01522585993565795300, 0.01721387917739294900, 0.01920189841912794600, 0.02118991766086294300, 0.02317793690259794100, 0.02516595614433293800, 0.02914199462780292900, 0.03311803311127292000, 0.03709407159474291400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7124519352031011300, 1.000000000000000000), + ( 1.000000000000000000, 0.7136330319072543600, 1.000000000000000000), + ( 1.000000000000000000, 0.7150275341995530100, 1.000000000000000000), + ( 1.000000000000000000, 0.7183649809152311500, 1.000000000000000000), + ( 1.000000000000000000, 0.7202871303654732000, 1.000000000000000000), + ( 1.000000000000000000, 0.7270026759633505500, 1.000000000000000000), + ( 1.000000000000000000, 0.7326600934013347600, 1.000000000000000000), + ( 1.000000000000000000, 0.7428939941167592700, 1.000000000000000000), + ( 1.000000000000000000, 0.7451064778928763200, 1.000000000000000000), + ( 1.000000000000000000, 0.7499398680590644300, 1.000000000000000000), + ( 1.000000000000000000, 0.7525690059068883600, 1.000000000000000000), + ( 1.000000000000000000, 0.7611242657730173900, 1.000000000000000000), + ( 1.000000000000000000, 0.7677370406145400700, 1.000000000000000000), + ( 1.000000000000000000, 0.7832104794026661900, 1.000000000000000000), + ( 1.000000000000000000, 0.7920918378299882700, 1.000000000000000000), + ( 1.000000000000000000, 0.8118135150491866400, 1.000000000000000000), + ( 1.000000000000000000, 0.8226317041581605600, 1.000000000000000000), + ( 1.000000000000000000, 0.8450857857689748600, 1.000000000000000000), + ( 1.000000000000000000, 0.8567474140679056700, 1.000000000000000000), + ( 1.000000000000000000, 0.8793555075011398900, 1.000000000000000000), + ( 1.000000000000000000, 0.8903432588892732400, 1.000000000000000000), + ( 1.000000000000000000, 0.9214899866917992700, 1.000000000000000000), + ( 1.000000000000000000, 0.9397934682865675100, 1.000000000000000000), + ( 1.000000000000000000, 0.9696072511760770500, 1.000000000000000000), + ( 1.000000000000000000, 0.9809610467245607500, 1.000000000000000000), + ( 1.000000000000000000, 0.9961753807919538900, 1.000000000000000000), + ( 1.000000000000000000, 1.000002346639573800, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8847 = ORIENTED_EDGE ( 'NONE', *, *, #14271, .F. ) ; +#8848 = CARTESIAN_POINT ( 'NONE', ( 25.17218618979392600, -16.12391840395560300, 23.92018795772554200 ) ) ; +#8849 = CARTESIAN_POINT ( 'NONE', ( 31.95531375603900100, -30.50054472287594000, 26.72050511614082100 ) ) ; +#8850 = CARTESIAN_POINT ( 'NONE', ( 37.86014780910728200, -11.92115955764464300, -18.99956352772939600 ) ) ; +#8851 = CARTESIAN_POINT ( 'NONE', ( 29.14591638481426400, -30.86428145294445400, 27.80530129371387800 ) ) ; +#8852 = CARTESIAN_POINT ( 'NONE', ( 27.10382550248547100, -9.904199341311958400, 25.21842031061868600 ) ) ; +#8853 = CARTESIAN_POINT ( 'NONE', ( 5.653085820328576500, -23.05521825239181800, 11.54922387102347500 ) ) ; +#8854 = CARTESIAN_POINT ( 'NONE', ( 9.598595359192822600, -12.50000000000005200, -20.13541820249933800 ) ) ; +#8855 = CARTESIAN_POINT ( 'NONE', ( 2.858001470927043400, -29.13703568385874800, 21.71015431889286500 ) ) ; +#8856 = DIRECTION ( 'NONE', ( -5.327447116441166800E-016, -3.469446951953615200E-016, 1.000000000000000000 ) ) ; +#8857 = ORIENTED_EDGE ( 'NONE', *, *, #7932, .F. ) ; +#8858 = EDGE_CURVE ( 'NONE', #4019, #14211, #6210, .T. ) ; +#8859 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999996400, -21.23289229930697200, -11.65633640135515100 ) ) ; +#8860 = CARTESIAN_POINT ( 'NONE', ( 10.85400660614242200, -30.86277230625827900, 27.80557772533100500 ) ) ; +#8861 = CARTESIAN_POINT ( 'NONE', ( 34.77558185067823600, -30.38848731560631900, 24.97973163533245600 ) ) ; +#8862 = CARTESIAN_POINT ( 'NONE', ( 25.18230982438285200, -12.49999999999978900, 21.76938161556835300 ) ) ; +#8863 = CARTESIAN_POINT ( 'NONE', ( 33.85016755404801400, -30.38343489904554700, 25.62896586241898300 ) ) ; +#8864 = CARTESIAN_POINT ( 'NONE', ( 35.37162264826992700, -10.00180964642538600, 22.59822649237969500 ) ) ; +#8865 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8866 = ADVANCED_FACE ( 'NONE', ( #12482 ), #10831, .T. ) ; +#8867 = ORIENTED_EDGE ( 'NONE', *, *, #12570, .T. ) ; +#8868 = CARTESIAN_POINT ( 'NONE', ( 2.882478365487156400, -19.54861960693409600, 11.84470002732302000 ) ) ; +#8869 = CARTESIAN_POINT ( 'NONE', ( 6.835432810768049100, -29.72411161706869000, 25.90445694619127800 ) ) ; +#8870 = CARTESIAN_POINT ( 'NONE', ( 1.646693298759390500, -10.13145910719493300, -18.98029328923497500 ) ) ; +#8871 = CARTESIAN_POINT ( 'NONE', ( 35.84942161762416600, -30.51463762188803500, 13.24633071365369100 ) ) ; +#8872 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12199, #6601, #6, #7744 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( -6.000000000574635900E-008, 0.004598945637212906700 ), + .UNSPECIFIED. ) ; +#8873 = CARTESIAN_POINT ( 'NONE', ( 9.991982941351198000, -30.55736320697296500, 27.55061809736850600 ) ) ; +#8874 = CARTESIAN_POINT ( 'NONE', ( 24.62925453469558300, -19.95404331672234500, 23.09624947306777900 ) ) ; +#8875 = EDGE_CURVE ( 'NONE', #3032, #14193, #13808, .T. ) ; +#8876 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.934664494868449900, 14.20247380673904100 ) ) ; +#8877 = CARTESIAN_POINT ( 'NONE', ( 37.50057077045762100, -20.40278737595717100, 7.946070368290307300 ) ) ; +#8878 = CARTESIAN_POINT ( 'NONE', ( 30.16518768954485800, -30.86652402959092700, 27.44714577164857200 ) ) ; +#8879 = CARTESIAN_POINT ( 'NONE', ( 34.92055594107598900, -20.28809933267076800, -13.23862856050437700 ) ) ; +#8880 = CARTESIAN_POINT ( 'NONE', ( 8.747336608862200400, -30.97569337779539500, 26.93634337737191900 ) ) ; +#8881 = CARTESIAN_POINT ( 'NONE', ( 36.24051778493988300, -30.39857223339699400, 23.30935739914747600 ) ) ; +#8882 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000001800, -22.50000000000002100, 26.62899292861731800 ) ) ; +#8883 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8884 = CARTESIAN_POINT ( 'NONE', ( 5.386749691625482200, -31.10686359130856400, 24.34857568447225200 ) ) ; +#8885 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999986700, -95.07596123493894400, 11.50239124669686000 ) ) ; +#8886 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8887 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8889 = CARTESIAN_POINT ( 'NONE', ( 3.600394286840554500, -28.89960507309726600, 22.00167280448676300 ) ) ; +#8890 = FACE_OUTER_BOUND ( 'NONE', #13335, .T. ) ; +#8891 = CARTESIAN_POINT ( 'NONE', ( 22.74713875977124600, -22.38137587805572800, -27.18187714353416200 ) ) ; +#8892 = CARTESIAN_POINT ( 'NONE', ( 31.92189270229593100, -31.03690242761815200, 26.55973008433778300 ) ) ; +#8893 = CIRCLE ( 'NONE', #12397, 2.499999999999998700 ) ; +#8894 = CARTESIAN_POINT ( 'NONE', ( 34.59992108673749600, -10.12092325324342900, -25.00000000000000000 ) ) ; +#8895 = CARTESIAN_POINT ( 'NONE', ( 28.93941805208558900, -30.81140407859351900, 27.87970263784724900 ) ) ; +#8896 = ORIENTED_EDGE ( 'NONE', *, *, #6178, .T. ) ; +#8897 = CARTESIAN_POINT ( 'NONE', ( 40.02499999999999900, -9.900000000000002100, 8.005331014629280900 ) ) ; +#8898 = CARTESIAN_POINT ( 'NONE', ( 14.23221725775157200, -24.17974285791196800, 19.58575396502065800 ) ) ; +#8899 = CARTESIAN_POINT ( 'NONE', ( 15.60816577712724000, -12.50000000000001100, -13.65927495547988700 ) ) ; +#8900 = CARTESIAN_POINT ( 'NONE', ( 2.048986580916453400, -11.90490581702819900, -18.81585457841835300 ) ) ; +#8901 = CARTESIAN_POINT ( 'NONE', ( 4.150584183597557000, -30.85796237184665000, 22.85778046134333200 ) ) ; +#8902 = CIRCLE ( 'NONE', #2158, 7.500000000000001800 ) ; +#8903 = CARTESIAN_POINT ( 'NONE', ( 37.49846943777170300, -27.34521567342947500, 7.997500217445664600 ) ) ; +#8904 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#8905 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9407, #8539, #10805 ), + ( #12930, #7708, #1059 ), + ( #8850, #2147, #9969 ), + ( #3257, #11103, #4377 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01198505864556338900, 0.01216943911335971800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7839037970967536200, 1.000000000000000000), + ( 1.000000000000000000, 0.7871459651313312800, 1.000000000000000000), + ( 1.000000000000000000, 0.7903972568294302900, 1.000000000000000000), + ( 1.000000000000000000, 0.7936517277408209300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#8906 = CARTESIAN_POINT ( 'NONE', ( 34.46155541006103800, -31.12208976368805600, 24.50327891970420400 ) ) ; +#8907 = ORIENTED_EDGE ( 'NONE', *, *, #10559, .F. ) ; +#8908 = CARTESIAN_POINT ( 'NONE', ( 23.27467520334376200, -12.50000000000000200, 10.01524347276609500 ) ) ; +#8909 = CARTESIAN_POINT ( 'NONE', ( 33.66815051670343500, -31.16383938993404700, 25.23931814191007900 ) ) ; +#8910 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -12.50000000000000400, -11.97268808056956300 ) ) ; +#8911 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8912 = CARTESIAN_POINT ( 'NONE', ( 3.425744726774478300, -20.15614126904262100, 13.27090431203070000 ) ) ; +#8913 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, -95.07596123493894400, 16.93034213569666900 ) ) ; +#8914 = CARTESIAN_POINT ( 'NONE', ( 6.899002299016730800, -30.72438023468611200, 26.03106276942463600 ) ) ; +#8915 = CARTESIAN_POINT ( 'NONE', ( 0.8537559795063333100, -11.41269804714301900, -15.77208063296195000 ) ) ; +#8916 = CARTESIAN_POINT ( 'NONE', ( 37.17599117603884900, -30.34620024002632700, 9.363122272371681400 ) ) ; +#8917 = EDGE_CURVE ( 'NONE', #4574, #13947, #10199, .T. ) ; +#8918 = CARTESIAN_POINT ( 'NONE', ( 24.15181345144133800, -100.0000000000000100, -38.28544755900107100 ) ) ; +#8919 = CARTESIAN_POINT ( 'NONE', ( 37.85502153680003100, -10.02451361873988500, 19.37223222862388600 ) ) ; +#8920 = CARTESIAN_POINT ( 'NONE', ( 37.60222643601366600, -19.58630141786403600, 7.980723908256173600 ) ) ; +#8921 = EDGE_LOOP ( 'NONE', ( #11022, #13483, #10354 ) ) ; +#8922 = CARTESIAN_POINT ( 'NONE', ( 29.75912082270684800, -30.62648384913258300, 27.63701485881461700 ) ) ; +#8923 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#8924 = CARTESIAN_POINT ( 'NONE', ( 8.734162834806019400, -30.53252450224534100, 27.04381726322079500 ) ) ; +#8925 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8286, #9214, #7134, #9405, #2707, #10534 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0002334263763343380300, 0.002583765407898877900, 0.004934104439463417800 ), + .UNSPECIFIED. ) ; +#8926 = CARTESIAN_POINT ( 'NONE', ( 35.51969254597970900, -29.11668371138053100, 23.61113259069090000 ) ) ; +#8927 = CARTESIAN_POINT ( 'NONE', ( 2.201553478879612500, -18.80761383210966300, -11.58833494795828200 ) ) ; +#8928 = ORIENTED_EDGE ( 'NONE', *, *, #12516, .F. ) ; +#8929 = CARTESIAN_POINT ( 'NONE', ( 32.87538815352996800, -20.86575217069450600, 18.86190488498518300 ) ) ; +#8930 = CARTESIAN_POINT ( 'NONE', ( 5.039321107327616300, -30.36675541495814900, 24.84572152217781100 ) ) ; +#8931 = CARTESIAN_POINT ( 'NONE', ( 1.966378757892585100, -10.00000000000000200, -23.10976506005330600 ) ) ; +#8932 = CARTESIAN_POINT ( 'NONE', ( 9.628335294552080400, -12.44449656773058000, -25.03044396734074400 ) ) ; +#8933 = CARTESIAN_POINT ( 'NONE', ( 7.604828280658793500, -32.11448912449682100, 24.20231349932531400 ) ) ; +#8934 = EDGE_LOOP ( 'NONE', ( #10970, #11992, #12104, #12167, #12266 ) ) ; +#8935 = EDGE_CURVE ( 'NONE', #5004, #6982, #8319, .T. ) ; +#8936 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, -19.99999999999999600 ) ) ; +#8937 = CARTESIAN_POINT ( 'NONE', ( 2.781684957982356400, -30.16946773354606000, 21.82453969922238100 ) ) ; +#8938 = CARTESIAN_POINT ( 'NONE', ( 32.48534317504378800, -18.90709539625384700, -23.45305662734566400 ) ) ; +#8939 = CARTESIAN_POINT ( 'NONE', ( 31.64613928935927600, -30.31932584580411900, 26.86657205107309200 ) ) ; +#8940 = CARTESIAN_POINT ( 'NONE', ( 0.3717614443620531600, -11.22080097103563300, 10.62675165421220700 ) ) ; +#8941 = CARTESIAN_POINT ( 'NONE', ( 28.94012266790665300, -30.84327529032946900, 27.87371434515356900 ) ) ; +#8942 = CARTESIAN_POINT ( 'NONE', ( 36.63253816853014700, -28.95605054924156000, 21.81039040581889300 ) ) ; +#8943 = ORIENTED_EDGE ( 'NONE', *, *, #4129, .T. ) ; +#8944 = CARTESIAN_POINT ( 'NONE', ( 38.05132902200040900, -10.00000000000000000, 16.24547452070608600 ) ) ; +#8945 = CARTESIAN_POINT ( 'NONE', ( 2.185133262090871700, -11.92747418448642800, -19.08876031342025200 ) ) ; +#8946 = CARTESIAN_POINT ( 'NONE', ( 6.810082152503254900, -21.59984668435980400, -18.42499892255874300 ) ) ; +#8947 = CARTESIAN_POINT ( 'NONE', ( 17.68719255689186200, -31.29913968154958300, 28.74438700826458900 ) ) ; +#8948 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -8.233171868353533500, 15.73801434716460100 ) ) ; +#8949 = CARTESIAN_POINT ( 'NONE', ( 3.457133942788650900, -29.87582778492567200, 23.18035942688985400 ) ) ; +#8950 = ORIENTED_EDGE ( 'NONE', *, *, #3791, .T. ) ; +#8951 = CARTESIAN_POINT ( 'NONE', ( 3.919842456191654700, -9.902760165351859100, 19.31924173151400500 ) ) ; +#8952 = CARTESIAN_POINT ( 'NONE', ( 2.015497905913271400, -11.89736398432701000, -18.74592009292127400 ) ) ; +#8953 = CARTESIAN_POINT ( 'NONE', ( 34.39661276479376500, -30.20005378924420800, 25.26966178897107100 ) ) ; +#8954 = VERTEX_POINT ( 'NONE', #844 ) ; +#8955 = CARTESIAN_POINT ( 'NONE', ( 27.30176279601789000, -24.10258248586991700, 19.03693374206712000 ) ) ; +#8956 = EDGE_CURVE ( 'NONE', #7400, #13647, #909, .T. ) ; +#8957 = CARTESIAN_POINT ( 'NONE', ( 33.64705862533953300, -30.17717600640393600, 25.76031255463627200 ) ) ; +#8958 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#8959 = CARTESIAN_POINT ( 'NONE', ( 4.492771210899239700, -20.59002281070315400, 15.55309004035335400 ) ) ; +#8960 = CARTESIAN_POINT ( 'NONE', ( 13.08476948152201300, -95.07596123493891600, 16.47927483829771200 ) ) ; +#8961 = CARTESIAN_POINT ( 'NONE', ( 36.36878722445600700, -32.97682908738739400, 11.58716313004216200 ) ) ; +#8962 = CARTESIAN_POINT ( 'NONE', ( 6.962832032284583600, -29.94452820015475300, 26.06904622467903100 ) ) ; +#8963 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -19.99999999999999300 ) ) ; +#8964 = ORIENTED_EDGE ( 'NONE', *, *, #8603, .F. ) ; +#8965 = CARTESIAN_POINT ( 'NONE', ( 16.06662027022552800, -33.14936076033370700, 28.41536337341156600 ) ) ; +#8966 = CARTESIAN_POINT ( 'NONE', ( 33.14431205699790400, -100.0000000000000100, -32.32580780564052200 ) ) ; +#8967 = CARTESIAN_POINT ( 'NONE', ( 16.76628326063592000, -19.35907318707239700, 23.34974288270533900 ) ) ; +#8968 = CARTESIAN_POINT ( 'NONE', ( 37.80112448189186100, -18.79538531364254100, 8.012248210475652500 ) ) ; +#8969 = EDGE_LOOP ( 'NONE', ( #7521, #7769 ) ) ; +#8970 = CARTESIAN_POINT ( 'NONE', ( 29.75985973277002500, -30.79494776671969800, 27.61393431242538900 ) ) ; +#8971 = VECTOR ( 'NONE', #5476, 999.9999999999998900 ) ; +#8972 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#8973 = CARTESIAN_POINT ( 'NONE', ( 8.950783489024626500, -31.04543898062923500, 27.00130154257928400 ) ) ; +#8974 = CARTESIAN_POINT ( 'NONE', ( 36.07783442014742500, -30.13922104168237900, 23.75298259187464800 ) ) ; +#8975 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999991100, -97.04517183358916600, 16.23828164244107300 ) ) ; +#8976 = ORIENTED_EDGE ( 'NONE', *, *, #10689, .F. ) ; +#8977 = EDGE_CURVE ( 'NONE', #14193, #11281, #2378, .T. ) ; +#8978 = CARTESIAN_POINT ( 'NONE', ( 37.47440020607603400, -26.46667846419860500, 7.773030153450524600 ) ) ; +#8979 = CARTESIAN_POINT ( 'NONE', ( 5.372261244693149300, -29.36044109572113200, 24.67215537240586800 ) ) ; +#8980 = CYLINDRICAL_SURFACE ( 'NONE', #13925, 5.000000000000000900 ) ; +#8981 = CARTESIAN_POINT ( 'NONE', ( 34.07697285505231800, -95.07596123493894400, 13.55967711234696100 ) ) ; +#8982 = VERTEX_POINT ( 'NONE', #8680 ) ; +#8983 = CARTESIAN_POINT ( 'NONE', ( 9.307359174008611900, -11.99261116098765400, -24.99999999999999600 ) ) ; +#8984 = CARTESIAN_POINT ( 'NONE', ( 3.346610596257671300, -29.01927975660569100, 22.03209616187650600 ) ) ; +#8985 = FACE_OUTER_BOUND ( 'NONE', #13785, .T. ) ; +#8986 = CARTESIAN_POINT ( 'NONE', ( 24.90567159055761000, -97.51411890013976300, 21.98952921255730100 ) ) ; +#8987 = CARTESIAN_POINT ( 'NONE', ( 31.65594174610660600, -30.82506097238509900, 26.79811561484850200 ) ) ; +#8988 = CARTESIAN_POINT ( 'NONE', ( 32.32491687647718900, -10.84026734650632500, -25.00000000000000000 ) ) ; +#8989 = CARTESIAN_POINT ( 'NONE', ( 28.83688416956265900, -30.81332401448162300, 27.91019897633457000 ) ) ; +#8990 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10677, #11795, #12905, #6198, #14001, #7323, #696, #8476, #1793, #9599 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002754032386067079800, 0.005508064772134159600, 0.008262097158201248500, 0.01101612954426833800 ), + .UNSPECIFIED. ) ; +#8991 = CARTESIAN_POINT ( 'NONE', ( 37.39704412588921700, -29.99264018362928000, 21.62810280725726400 ) ) ; +#8992 = CARTESIAN_POINT ( 'NONE', ( 6.708905350703135500, -12.50000000000009100, -16.80960935903743800 ) ) ; +#8993 = CARTESIAN_POINT ( 'NONE', ( 4.959958425655234000, -12.50000000000009100, 10.80566493125433800 ) ) ; +#8994 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -99.99999999999998600, -40.86942826376123600 ) ) ; +#8995 = CARTESIAN_POINT ( 'NONE', ( 4.175133441501544400, -29.04261496994449100, 23.17179718357277800 ) ) ; +#8996 = LINE ( 'NONE', #13083, #8665 ) ; +#8997 = EDGE_CURVE ( 'NONE', #4045, #13947, #8691, .T. ) ; +#8998 = VERTEX_POINT ( 'NONE', #3099 ) ; +#8999 = CIRCLE ( 'NONE', #13948, 3.189999999999995100 ) ; +#9000 = CARTESIAN_POINT ( 'NONE', ( 0.1244080298464615200, -10.00000000000000000, 10.44767342015812700 ) ) ; +#9001 = CARTESIAN_POINT ( 'NONE', ( 24.33883922791492800, -12.49999999999999300, -13.72052479741015000 ) ) ; +#9002 = CARTESIAN_POINT ( 'NONE', ( 6.818164888785172900, -36.88762002862073100, 15.73384757444363300 ) ) ; +#9003 = CARTESIAN_POINT ( 'NONE', ( 34.18062518441482200, -31.09480121341589200, 24.85050520672833900 ) ) ; +#9004 = ORIENTED_EDGE ( 'NONE', *, *, #9119, .T. ) ; +#9005 = CARTESIAN_POINT ( 'NONE', ( 28.98171358836137300, -12.49999999999988100, 20.25556716589012000 ) ) ; +#9006 = CARTESIAN_POINT ( 'NONE', ( 33.56286507632600500, -31.01209810929328400, 25.49216767654534300 ) ) ; +#9007 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #785, #8570, #1888 ), + ( #9700, #2988, #10834 ), + ( #4102, #11938, #5213 ), + ( #13051, #6343, #14152 ), + ( #7480, #841, #8624 ), + ( #1938, #9755, #3042 ), + ( #10887, #4151, #11991 ), + ( #5259, #13101, #6396 ), + ( #14202, #7530, #884 ), + ( #8676, #1981, #9799 ), + ( #3097, #10939, #4205 ), + ( #12037, #5312, #13150 ), + ( #6443, #2985, #10829 ), + ( #4099, #11934, #5210 ), + ( #13048, #6339, #14147 ), + ( #7477, #838, #8621 ), + ( #1934, #9750, #3040 ), + ( #10884, #4147, #11988 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 3.141592653589793100, 3.339120291684251300, 3.536647929778709500, 3.734175567873167600, 3.931703205967626200, 4.129230844062084800, 4.326758482156543000, 4.524286120251001200, 4.721813758345459400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6427876096865418100, 1.000000000000000000), + ( 1.000000000000000000, 0.6427869131628457500, 1.000000000000000000), + ( 1.000000000000000000, 0.6432286554914665700, 1.000000000000000000), + ( 1.000000000000000000, 0.6449704378542395800, 1.000000000000000000), + ( 1.000000000000000000, 0.6462710433721369200, 1.000000000000000000), + ( 1.000000000000000000, 0.6496664724625566000, 1.000000000000000000), + ( 1.000000000000000000, 0.6517610593505727100, 1.000000000000000000), + ( 1.000000000000000000, 0.6566415426766554200, 1.000000000000000000), + ( 1.000000000000000000, 0.6594271385701525600, 1.000000000000000000), + ( 1.000000000000000000, 0.6655575263461980300, 1.000000000000000000), + ( 1.000000000000000000, 0.6689019988231476000, 1.000000000000000000), + ( 1.000000000000000000, 0.6759982929549097600, 1.000000000000000000), + ( 1.000000000000000000, 0.6797498133379195100, 1.000000000000000000), + ( 1.000000000000000000, 0.6874980667938469500, 1.000000000000000000), + ( 1.000000000000000000, 0.6914945400838149500, 1.000000000000000000), + ( 1.000000000000000000, 0.6995687671181795000, 1.000000000000000000), + ( 1.000000000000000000, 0.7036464409744374000, 1.000000000000000000), + ( 1.000000000000000000, 0.7076851599719636800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9008 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#9009 = CARTESIAN_POINT ( 'NONE', ( 5.746436354545869200, -19.03812903310668900, 17.79965999890029200 ) ) ; +#9010 = CARTESIAN_POINT ( 'NONE', ( 29.82835220439374900, -38.43450379858271800, 18.08987847672681000 ) ) ; +#9011 = CARTESIAN_POINT ( 'NONE', ( 7.052729387250421300, -31.01632652585282200, 25.94194091218693300 ) ) ; +#9012 = CARTESIAN_POINT ( 'NONE', ( 32.70383782689199800, -100.0000000000000100, 1.264554945771521300 ) ) ; +#9013 = ORIENTED_EDGE ( 'NONE', *, *, #3290, .F. ) ; +#9014 = CARTESIAN_POINT ( 'NONE', ( 4.264895551862407400, -94.67500048867458400, 8.080024367542359100 ) ) ; +#9015 = CARTESIAN_POINT ( 'NONE', ( 11.18573799750334500, -32.82321213003442800, 25.60542936019740200 ) ) ; +#9016 = CARTESIAN_POINT ( 'NONE', ( 37.49568158109030200, -21.20084516728755400, 8.159049984734332700 ) ) ; +#9017 = VERTEX_POINT ( 'NONE', #10941 ) ; +#9018 = CARTESIAN_POINT ( 'NONE', ( 29.55554524098937100, -30.66003992566653100, 27.70393834646143500 ) ) ; +#9019 = CARTESIAN_POINT ( 'NONE', ( 2.510058132171279600, -27.55641513033316100, 9.891882551931109500 ) ) ; +#9020 = CARTESIAN_POINT ( 'NONE', ( 8.929776343550967600, -30.66582280038501200, 27.11621818649399900 ) ) ; +#9021 = CARTESIAN_POINT ( 'NONE', ( 35.51847052303904900, -30.95440820604307300, 23.28651041494394400 ) ) ; +#9022 = CARTESIAN_POINT ( 'NONE', ( 3.358525124108474800, -7.500000000000006200, 24.72287626683326400 ) ) ; +#9023 = EDGE_CURVE ( 'NONE', #9631, #834, #10238, .T. ) ; +#9024 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5196, #14081, #13037 ), + ( #6326, #14136, #7464 ), + ( #827, #8610, #1920 ), + ( #9737, #3026, #10872 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -3.295974604355933500E-017, 0.004071859375105592100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7936335741122216800, 1.000000000000000000), + ( 1.000000000000000000, 0.7939205733362391100, 1.000000000000000000), + ( 1.000000000000000000, 0.7940541409243576700, 1.000000000000000000), + ( 1.000000000000000000, 0.7941272348232409900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9025 = VECTOR ( 'NONE', #11082, 1000.000000000000000 ) ; +#9026 = ADVANCED_FACE ( 'NONE', ( #10598 ), #10921, .T. ) ; +#9027 = CARTESIAN_POINT ( 'NONE', ( 3.830115433849580000, -10.00000000000000000, -24.86121076501348900 ) ) ; +#9028 = CARTESIAN_POINT ( 'NONE', ( 5.291795143678541500, -30.67022313296695300, 24.85808469531592400 ) ) ; +#9029 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -9.897419301475807200E-015, 25.00105000000004200 ) ) ; +#9030 = ORIENTED_EDGE ( 'NONE', *, *, #11565, .F. ) ; +#9031 = CARTESIAN_POINT ( 'NONE', ( 3.405104066945983100, -30.54106849742173700, 21.92736806732890300 ) ) ; +#9032 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -12.50000000000001100, 10.14164662228683300 ) ) ; +#9033 = CARTESIAN_POINT ( 'NONE', ( 31.53191397190582300, -30.18436621228127600, 26.90306088419236000 ) ) ; +#9034 = DIRECTION ( 'NONE', ( -0.9998119278664177000, 0.01909889591384044900, 0.003367650651352544600 ) ) ; +#9035 = CARTESIAN_POINT ( 'NONE', ( 28.83688445335348000, -30.82952975706012900, 27.90734138401561300 ) ) ; +#9036 = CARTESIAN_POINT ( 'NONE', ( 36.42819234645374100, -28.88590759671755100, 21.88530889916504700 ) ) ; +#9037 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57596123493894400, 11.50239124669685300 ) ) ; +#9038 = CARTESIAN_POINT ( 'NONE', ( 15.19571680982315700, -12.50000000000000500, -12.97211023612264700 ) ) ; +#9039 = CARTESIAN_POINT ( 'NONE', ( 15.11620436195121000, -12.50000000000002000, 8.341009285529994000 ) ) ; +#9040 = CARTESIAN_POINT ( 'NONE', ( 4.109574195548161900, -12.14568508299315400, -21.78477187248388000 ) ) ; +#9041 = EDGE_CURVE ( 'NONE', #14211, #10725, #1323, .T. ) ; +#9042 = CARTESIAN_POINT ( 'NONE', ( 3.677126589898524600, -30.22810973715430200, 23.36712159065083600 ) ) ; +#9043 = EDGE_LOOP ( 'NONE', ( #10818, #1897, #7467, #10800, #13227 ) ) ; +#9044 = CARTESIAN_POINT ( 'NONE', ( 16.46545004268235600, -10.00000000000000400, 25.78620402583548500 ) ) ; +#9045 = CARTESIAN_POINT ( 'NONE', ( 30.40654411958874800, -21.15657876691416200, -21.59683518382514600 ) ) ; +#9046 = CARTESIAN_POINT ( 'NONE', ( 2.775771117877864600, -30.10019919777486000, 9.162597399323557200 ) ) ; +#9047 = CARTESIAN_POINT ( 'NONE', ( 34.13422182138830200, -29.87409743124206300, 25.36062805651902300 ) ) ; +#9048 = AXIS2_PLACEMENT_3D ( 'NONE', #11197, #12303, #3350 ) ; +#9049 = CARTESIAN_POINT ( 'NONE', ( 23.67373605213446200, -12.50000000000001200, 9.839845656752180100 ) ) ; +#9050 = CARTESIAN_POINT ( 'NONE', ( 33.47706746976212600, -29.83715302523847500, 25.76575058122454800 ) ) ; +#9051 = CARTESIAN_POINT ( 'NONE', ( 6.848234335003487800, -19.48036004614077400, 18.86086931529843700 ) ) ; +#9052 = CARTESIAN_POINT ( 'NONE', ( 23.74072192427563300, -19.90880266658576400, 23.24451361495058400 ) ) ; +#9053 = CARTESIAN_POINT ( 'NONE', ( 34.94702534075985800, -12.49999999999421300, -12.35664312450003200 ) ) ; +#9054 = CARTESIAN_POINT ( 'NONE', ( 6.992414147171421000, -30.28517379180951300, 26.16631946186881300 ) ) ; +#9055 = CARTESIAN_POINT ( 'NONE', ( 23.33336499485021800, -100.0000000000000100, 6.630571736238752400 ) ) ; +#9056 = LOCAL_TIME ( 15, 9, 47.00000000000000000, #9070 ) ; +#9057 = CARTESIAN_POINT ( 'NONE', ( 39.99954748881041400, -10.00181004475833300, 10.20558334668864100 ) ) ; +#9058 = CARTESIAN_POINT ( 'NONE', ( 4.861574050466275700, -29.42359637960773400, 25.16227031978514400 ) ) ; +#9059 = CARTESIAN_POINT ( 'NONE', ( 11.61386047459014000, -10.20382722289040300, -25.03594023879856000 ) ) ; +#9060 = EDGE_LOOP ( 'NONE', ( #1625, #10129, #7382, #1806, #10284 ) ) ; +#9061 = EDGE_CURVE ( 'NONE', #4379, #8513, #6149, .T. ) ; +#9062 = CARTESIAN_POINT ( 'NONE', ( 37.48818656475433600, -20.37461512522810400, 8.556513458498516300 ) ) ; +#9063 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9064 = CARTESIAN_POINT ( 'NONE', ( 8.950840305453908700, -30.29999373556600900, 27.13261769602803500 ) ) ; +#9065 = CARTESIAN_POINT ( 'NONE', ( 35.94803312394053300, -29.87668182675874100, 23.89066529075615700 ) ) ; +#9066 = CARTESIAN_POINT ( 'NONE', ( 28.62414732397114000, -28.14358378613586000, 26.50241616395821300 ) ) ; +#9067 = FACE_OUTER_BOUND ( 'NONE', #2881, .T. ) ; +#9068 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#9069 = CARTESIAN_POINT ( 'NONE', ( 23.59962942188618100, -18.88052354113348500, 23.43412409688155800 ) ) ; +#9070 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#9071 = CARTESIAN_POINT ( 'NONE', ( 5.377313207446569300, -29.69801938396227600, 24.93527457569606700 ) ) ; +#9072 = CARTESIAN_POINT ( 'NONE', ( 16.15929915630675900, -19.82000516770135300, -26.73153186176223500 ) ) ; +#9073 = ORIENTED_EDGE ( 'NONE', *, *, #8810, .F. ) ; +#9074 = CARTESIAN_POINT ( 'NONE', ( 6.905379913490851800, -23.41986919149452000, 14.16167854057104600 ) ) ; +#9075 = CARTESIAN_POINT ( 'NONE', ( 0.4718163338683764600, -11.88726533547343900, 8.011944216826618600 ) ) ; +#9076 = CARTESIAN_POINT ( 'NONE', ( 36.03751480575277800, -30.78114171048008200, 21.81520739464554400 ) ) ; +#9077 = CARTESIAN_POINT ( 'NONE', ( 2.847829962533705100, -29.37618590016865400, 22.11729189585449600 ) ) ; +#9078 = DIRECTION ( 'NONE', ( -0.5022820777495851100, 0.0000000000000000000, 0.8647038304365026700 ) ) ; +#9079 = CARTESIAN_POINT ( 'NONE', ( 31.56405293264775100, -30.68001885595029100, 26.88467656303742700 ) ) ; +#9080 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424066300 ) ) ; +#9081 = CARTESIAN_POINT ( 'NONE', ( 37.49154249409822600, -29.67416011914423600, 21.74767002706106200 ) ) ; +#9082 = CARTESIAN_POINT ( 'NONE', ( 27.48556693717392800, -27.27891594821629100, 21.10949545199847700 ) ) ; +#9083 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #4869, #12709, #6007, #13811 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.176400979550518600, 3.184977457275373100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9999938703452127000, 0.9999938703452127000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#9084 = CARTESIAN_POINT ( 'NONE', ( 5.832513817064766600, -23.12216007055359400, 12.02779086299835900 ) ) ; +#9085 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23105625617644100, 7.788262581895412300 ) ) ; +#9086 = ORIENTED_EDGE ( 'NONE', *, *, #10937, .F. ) ; +#9087 = CARTESIAN_POINT ( 'NONE', ( 4.231420724461140800, -29.12127103182223600, 23.36500770943292700 ) ) ; +#9088 = CARTESIAN_POINT ( 'NONE', ( 8.904276080177600900, -19.64298020337100300, 20.59455586536663000 ) ) ; +#9089 = AXIS2_PLACEMENT_3D ( 'NONE', #2245, #1019, #10070 ) ; +#9090 = CARTESIAN_POINT ( 'NONE', ( 29.19642977184477300, -12.50000000000021300, -21.00077332414096900 ) ) ; +#9091 = CARTESIAN_POINT ( 'NONE', ( 38.22152778587889800, -10.00000000000000000, -19.28939737522826500 ) ) ; +#9092 = CARTESIAN_POINT ( 'NONE', ( 34.13424311092040100, -30.84007982421514500, 25.19030054118724100 ) ) ; +#9093 = CARTESIAN_POINT ( 'NONE', ( 29.13449329611956500, -23.97059212006335800, 18.09569535262867700 ) ) ; +#9094 = CARTESIAN_POINT ( 'NONE', ( 33.55754869302077700, -30.69747446105334600, 25.73147475950343500 ) ) ; +#9095 = VERTEX_POINT ( 'NONE', #10990 ) ; +#9096 = CARTESIAN_POINT ( 'NONE', ( 10.85519292269481700, -30.80037300353712800, 27.81793636493658200 ) ) ; +#9097 = CARTESIAN_POINT ( 'NONE', ( 9.207533695054646500, -19.81020253489143500, 20.73105932359146700 ) ) ; +#9098 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, 1.200000000000012600 ) ) ; +#9099 = CARTESIAN_POINT ( 'NONE', ( 24.95247460603354000, -12.49999999999995700, -12.47272328047881000 ) ) ; +#9100 = CARTESIAN_POINT ( 'NONE', ( 7.360586664359615000, -31.15458356405583000, 26.03994571556644600 ) ) ; +#9101 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #13661, #365, #9253 ), + ( #2551, #10367, #3658 ), + ( #11505, #4773, #12605 ), + ( #5899, #13712, #7027 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.004188463229657957500, 0.004372282503007907800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7936517277408214900, 1.000000000000000000), + ( 1.000000000000000000, 0.7903959592286951000, 1.000000000000000000), + ( 1.000000000000000000, 0.7871446674064996900, 1.000000000000000000), + ( 1.000000000000000000, 0.7839037970968050200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9102 = EDGE_CURVE ( 'NONE', #9371, #5004, #9521, .T. ) ; +#9103 = PLANE ( 'NONE', #11040 ) ; +#9104 = CARTESIAN_POINT ( 'NONE', ( 2.791119891987927600, -11.88310742809208300, 16.75330826965224400 ) ) ; +#9105 = EDGE_LOOP ( 'NONE', ( #14049, #5841 ) ) ; +#9106 = CARTESIAN_POINT ( 'NONE', ( 37.53964840799891100, -19.57300722931585600, 9.340539815803151000 ) ) ; +#9107 = CARTESIAN_POINT ( 'NONE', ( 15.71121399945625200, -17.93045765093300000, 23.60164634677468600 ) ) ; +#9108 = CARTESIAN_POINT ( 'NONE', ( 9.029828267857590500, -30.76050815780744000, 27.14139665379697100 ) ) ; +#9109 = CARTESIAN_POINT ( 'NONE', ( 35.57721527355196400, -30.86293499830283300, 23.47386519530840200 ) ) ; +#9110 = EDGE_LOOP ( 'NONE', ( #4207, #10701, #7337, #8496 ) ) ; +#9111 = CARTESIAN_POINT ( 'NONE', ( 34.17304989932238600, -31.10883149961137700, 25.48555634975769700 ) ) ; +#9112 = CARTESIAN_POINT ( 'NONE', ( 24.82020690972810000, -17.82686911986795400, 23.58425936084371300 ) ) ; +#9113 = CARTESIAN_POINT ( 'NONE', ( 5.784165507721957600, -31.03062071179559900, 24.90487735308740000 ) ) ; +#9114 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999991100, -95.07596123493894400, 0.8682408883346195400 ) ) ; +#9115 = ORIENTED_EDGE ( 'NONE', *, *, #10468, .F. ) ; +#9116 = CARTESIAN_POINT ( 'NONE', ( 6.261137639970890200, -12.49999999999999800, 15.13110679246069900 ) ) ; +#9117 = CARTESIAN_POINT ( 'NONE', ( 0.3705824334919907700, -11.48232973396789400, 9.157214491688899100 ) ) ; +#9118 = CARTESIAN_POINT ( 'NONE', ( 32.86732653062527700, -30.07246844769675000, 26.41540225880143900 ) ) ; +#9119 = EDGE_CURVE ( 'NONE', #876, #4566, #7238, .T. ) ; +#9120 = CARTESIAN_POINT ( 'NONE', ( 3.715323072776689700, -30.68336751604290300, 22.01600870438307200 ) ) ; +#9121 = CARTESIAN_POINT ( 'NONE', ( 17.64068810071532000, -27.98724906675760900, 27.51084736717636400 ) ) ; +#9122 = CARTESIAN_POINT ( 'NONE', ( 11.84657918575577900, -31.29892962639993600, 28.02480531093843300 ) ) ; +#9123 = VERTEX_POINT ( 'NONE', #4302 ) ; +#9124 = CARTESIAN_POINT ( 'NONE', ( 31.53028290923445100, -31.08742417039755400, 26.74032927639790500 ) ) ; +#9125 = CARTESIAN_POINT ( 'NONE', ( 28.38839615934762200, -9.781278341185556600, -25.00000000000000000 ) ) ; +#9126 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#9127 = CARTESIAN_POINT ( 'NONE', ( 36.43004717130500600, -30.57937547132115300, 21.58655962844334700 ) ) ; +#9128 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -100.0000000000000100, 6.630571736238759500 ) ) ; +#9129 = CARTESIAN_POINT ( 'NONE', ( 34.10573090172938000, -28.81847303277695700, 25.07541288981246200 ) ) ; +#9130 = ORIENTED_EDGE ( 'NONE', *, *, #9595, .F. ) ; +#9131 = CARTESIAN_POINT ( 'NONE', ( 4.294025317888195300, -30.90779168087546600, 23.02567346301589500 ) ) ; +#9132 = VECTOR ( 'NONE', #2859, 1000.000000000000000 ) ; +#9133 = CARTESIAN_POINT ( 'NONE', ( 4.156014766802820200, -30.64671903060600800, 23.53298114673461300 ) ) ; +#9134 = CARTESIAN_POINT ( 'NONE', ( 16.37829181791362000, -12.50000000000000400, -14.28205117059983400 ) ) ; +#9135 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -17.49999999999999600 ) ) ; +#9136 = ORIENTED_EDGE ( 'NONE', *, *, #7185, .F. ) ; +#9137 = CARTESIAN_POINT ( 'NONE', ( 23.87159210642647600, -12.49999999999999300, -14.12720567793670200 ) ) ; +#9138 = CARTESIAN_POINT ( 'NONE', ( 33.77245466447130400, -29.62298143085283200, 25.47071947261646900 ) ) ; +#9139 = CARTESIAN_POINT ( 'NONE', ( 30.40071727143621100, -12.49999999999999100, 19.26066319627618700 ) ) ; +#9140 = EDGE_CURVE ( 'NONE', #8131, #11497, #14237, .T. ) ; +#9141 = CARTESIAN_POINT ( 'NONE', ( 33.25010165276508900, -29.70052935017457000, 25.84146555864942500 ) ) ; +#9142 = ORIENTED_EDGE ( 'NONE', *, *, #3029, .F. ) ; +#9143 = CARTESIAN_POINT ( 'NONE', ( 10.85395154857577900, -30.74578465295391900, 27.82613140680187400 ) ) ; +#9144 = CARTESIAN_POINT ( 'NONE', ( 10.52370122402450300, -20.09554551719005400, 21.47231135082097700 ) ) ; +#9145 = CARTESIAN_POINT ( 'NONE', ( 34.72197644925564200, -22.13661161553658700, -14.57919137422663700 ) ) ; +#9146 = LINE ( 'NONE', #11405, #9155 ) ; +#9147 = CARTESIAN_POINT ( 'NONE', ( 14.99999999674284000, -12.50000000000000900, 7.648322698171385000 ) ) ; +#9148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9149 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -12.50000000000001400, 7.732012845914697500 ) ) ; +#9150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122093500, -0.1736481776669230600 ) ) ; +#9151 = CARTESIAN_POINT ( 'NONE', ( 37.49987974292702100, -18.86594769191801600, 10.89710923391862400 ) ) ; +#9152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9153 = CARTESIAN_POINT ( 'NONE', ( 9.042794800925905800, -30.38476948518516400, 27.17797864159492200 ) ) ; +#9154 = CARTESIAN_POINT ( 'NONE', ( 35.56649676748855200, -29.48188142724622600, 24.00450657394980100 ) ) ; +#9155 = VECTOR ( 'NONE', #3565, 1000.000000000000000 ) ; +#9156 = ORIENTED_EDGE ( 'NONE', *, *, #3375, .F. ) ; +#9157 = CARTESIAN_POINT ( 'NONE', ( 37.63832222136854700, -29.58713030419464500, 23.14205974178493000 ) ) ; +#9158 = VECTOR ( 'NONE', #4113, 1000.000000000000000 ) ; +#9159 = ADVANCED_FACE ( 'NONE', ( #13820 ), #286, .F. ) ; +#9160 = CARTESIAN_POINT ( 'NONE', ( 26.18931012739860300, -14.34444292402551300, 24.23395749634613200 ) ) ; +#9161 = CARTESIAN_POINT ( 'NONE', ( 5.608800436006149900, -30.16262323060812300, 25.26963355077673500 ) ) ; +#9162 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8733, #946, #2047, #9858 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001687849759823626300 ), + .UNSPECIFIED. ) ; +#9163 = CARTESIAN_POINT ( 'NONE', ( 39.99726015004257100, -12.49999999999999500, -20.16550224408274200 ) ) ; +#9164 = ORIENTED_EDGE ( 'NONE', *, *, #10767, .F. ) ; +#9165 = CARTESIAN_POINT ( 'NONE', ( 15.52895024438233100, -12.50000000000000200, 9.150363710920348800 ) ) ; +#9166 = CARTESIAN_POINT ( 'NONE', ( 3.084192070732677300, -9.999999999999996400, 21.25353874758546300 ) ) ; +#9167 = CARTESIAN_POINT ( 'NONE', ( 28.02396813878481300, -32.82716107139601300, 27.82377560190148100 ) ) ; +#9168 = CARTESIAN_POINT ( 'NONE', ( 11.56504391888746100, -10.69556025937173500, 24.87735395956419300 ) ) ; +#9169 = CARTESIAN_POINT ( 'NONE', ( 2.689603099412218900, -29.74640496538326000, 22.16400174541606200 ) ) ; +#9170 = VECTOR ( 'NONE', #8346, 1000.000000000000000 ) ; +#9171 = ORIENTED_EDGE ( 'NONE', *, *, #3214, .T. ) ; +#9172 = CARTESIAN_POINT ( 'NONE', ( 31.36632946791145900, -30.58813111953390500, 26.99281945219885500 ) ) ; +#9173 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#9174 = CARTESIAN_POINT ( 'NONE', ( 37.23798662219942200, -29.34546081608195300, 21.91651737552832900 ) ) ; +#9175 = CARTESIAN_POINT ( 'NONE', ( 11.91883819619316200, -22.03500000000001400, 19.06916799395604700 ) ) ; +#9176 = AXIS2_PLACEMENT_3D ( 'NONE', #11244, #4516, #12350 ) ; +#9177 = CARTESIAN_POINT ( 'NONE', ( 33.18575221224462300, -20.96067471907375100, 18.53416915080340400 ) ) ; +#9178 = CARTESIAN_POINT ( 'NONE', ( 17.43261187333500600, -19.89242725398775800, 23.25569817042773500 ) ) ; +#9179 = CARTESIAN_POINT ( 'NONE', ( 6.250595167443463200, -31.16377712825320100, 25.16699514996870200 ) ) ; +#9180 = ORIENTED_EDGE ( 'NONE', *, *, #2909, .F. ) ; +#9181 = CARTESIAN_POINT ( 'NONE', ( 4.156001009330699600, -29.48888948552741600, 23.73643408471946300 ) ) ; +#9182 = CARTESIAN_POINT ( 'NONE', ( 33.82559955410945900, -18.00600316286317000, -22.42452431095769300 ) ) ; +#9183 = CARTESIAN_POINT ( 'NONE', ( 31.09572391982236200, -19.64298020337105700, 20.59455586536664400 ) ) ; +#9184 = CARTESIAN_POINT ( 'NONE', ( 27.89458887979425200, -11.48430284512516400, 24.54478403577906700 ) ) ; +#9185 = CYLINDRICAL_SURFACE ( 'NONE', #12948, 15.00000000000000200 ) ; +#9186 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -8.734665194584144000, 14.07958627976163700 ) ) ; +#9187 = CARTESIAN_POINT ( 'NONE', ( 28.18094199456137300, -30.80754545527061000, 28.10227463480051600 ) ) ; +#9188 = ORIENTED_EDGE ( 'NONE', *, *, #6157, .T. ) ; +#9189 = CARTESIAN_POINT ( 'NONE', ( 28.71413600532461200, -20.99425299464838100, -22.75610831794573800 ) ) ; +#9190 = EDGE_CURVE ( 'NONE', #9349, #11929, #6340, .T. ) ; +#9191 = CARTESIAN_POINT ( 'NONE', ( 36.97959486424791500, -12.03011971825025700, -20.51582182436935800 ) ) ; +#9192 = CARTESIAN_POINT ( 'NONE', ( 23.97041092659808800, -12.50000000000004100, 9.650340013389069300 ) ) ; +#9193 = CARTESIAN_POINT ( 'NONE', ( 33.39494088790499400, -30.50279117175955400, 25.91722604941545100 ) ) ; +#9194 = VERTEX_POINT ( 'NONE', #5491 ) ; +#9195 = CARTESIAN_POINT ( 'NONE', ( 11.06046130418317300, -30.82089544010087000, 27.87799032741935800 ) ) ; +#9196 = CARTESIAN_POINT ( 'NONE', ( 12.27528748247936500, -19.16088023715503000, 22.48231618739021400 ) ) ; +#9197 = CARTESIAN_POINT ( 'NONE', ( 6.378591109691155800, -12.49999999999959500, -16.22876280081099400 ) ) ; +#9198 = CARTESIAN_POINT ( 'NONE', ( 34.12323937339735400, -12.50000000000084600, -15.17205975921121000 ) ) ; +#9199 = CARTESIAN_POINT ( 'NONE', ( 5.236981625825293900, -22.83557088097124700, 9.972738089162627200 ) ) ; +#9200 = AXIS2_PLACEMENT_3D ( 'NONE', #9840, #5391, #13234 ) ; +#9201 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9202 = CARTESIAN_POINT ( 'NONE', ( 23.15611377979153200, -12.49999999999999300, 10.05710643068814700 ) ) ; +#9203 = CARTESIAN_POINT ( 'NONE', ( 3.851775608614002700, -94.71789415300563100, 14.39284042840214400 ) ) ; +#9204 = CARTESIAN_POINT ( 'NONE', ( 36.71051984858522800, -20.82161074184533700, 12.76245110227879600 ) ) ; +#9205 = CARTESIAN_POINT ( 'NONE', ( 37.45541189464492500, -10.00000000000000000, -20.84018286190874000 ) ) ; +#9206 = CARTESIAN_POINT ( 'NONE', ( 37.49944835869821000, -21.21984131747930000, 7.920870232712987400 ) ) ; +#9207 = CARTESIAN_POINT ( 'NONE', ( 9.235056059611563800, -30.90713683641541500, 27.18749976781894500 ) ) ; +#9208 = CARTESIAN_POINT ( 'NONE', ( 35.69953983997607600, -30.54729593457041400, 23.92248458313332900 ) ) ; +#9209 = ORIENTED_EDGE ( 'NONE', *, *, #12939, .T. ) ; +#9210 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -17.49999999999999600 ) ) ; +#9211 = EDGE_CURVE ( 'NONE', #5375, #3143, #1760, .T. ) ; +#9212 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1513, #9441, #10579 ), + ( #3855, #11697, #4962 ), + ( #12801, #6089, #13898 ), + ( #7220, #594, #8373 ), + ( #1693, #9495, #2788 ), + ( #10628, #3907, #11744 ), + ( #5009, #12855, #6139 ), + ( #13949, #7268, #645 ), + ( #8421, #1739, #9548 ), + ( #2832, #10674, #3956 ), + ( #11791, #5061, #12902 ), + ( #6194, #13998, #7319 ), + ( #692, #8471, #1788 ), + ( #9594, #2890, #10726 ), + ( #4000, #11838, #5114 ), + ( #12949, #6241, #14050 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -1.734723475976807100E-018, 0.002226100544389925000, 0.004452201088779851800, 0.005565251360974814500, 0.006678301633169778100, 0.008904402177559705300, 0.01335660326633955800, 0.01780880435511941100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865484600, 1.000000000000000000), + ( 1.000000000000000000, 0.7244825415842329800, 1.000000000000000000), + ( 1.000000000000000000, 0.7419772105791364600, 1.000000000000000000), + ( 1.000000000000000000, 0.7769715623865116600, 1.000000000000000000), + ( 1.000000000000000000, 0.7944760416277865100, 1.000000000000000000), + ( 1.000000000000000000, 0.8203989626031503700, 1.000000000000000000), + ( 1.000000000000000000, 0.8289841048676635000, 1.000000000000000000), + ( 1.000000000000000000, 0.8457553974926242900, 1.000000000000000000), + ( 1.000000000000000000, 0.8539697634097147500, 1.000000000000000000), + ( 1.000000000000000000, 0.8780002341408039700, 1.000000000000000000), + ( 1.000000000000000000, 0.8932073966718497800, 1.000000000000000000), + ( 1.000000000000000000, 0.9354213354538863900, 1.000000000000000000), + ( 1.000000000000000000, 0.9589939734615902100, 1.000000000000000000), + ( 1.000000000000000000, 0.9913592356947225100, 1.000000000000000000), + ( 1.000000000000000000, 1.000064721039821000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9213 = CARTESIAN_POINT ( 'NONE', ( 6.006767948029822600, -31.15388785107811400, 24.95306989719815500 ) ) ; +#9214 = CARTESIAN_POINT ( 'NONE', ( 27.96236619896409400, -10.93783535225587600, -25.16536567606505800 ) ) ; +#9215 = CARTESIAN_POINT ( 'NONE', ( 23.19816208613199000, -33.33529085974898000, 26.50809844975878700 ) ) ; +#9216 = CARTESIAN_POINT ( 'NONE', ( 17.48569428197027200, -27.96569314221763100, 27.45698461833215400 ) ) ; +#9217 = AXIS2_PLACEMENT_3D ( 'NONE', #2107, #9934, #3220 ) ; +#9218 = CARTESIAN_POINT ( 'NONE', ( 3.717130164388942500, -28.93521564541305900, 22.32485241199230000 ) ) ; +#9219 = CARTESIAN_POINT ( 'NONE', ( 31.34254928120533300, -31.04305464552852100, 26.86005495252268800 ) ) ; +#9220 = CARTESIAN_POINT ( 'NONE', ( 12.95093844489440100, -30.77347370972986700, 28.36765821957190400 ) ) ; +#9221 = CARTESIAN_POINT ( 'NONE', ( 36.67151117265577700, -30.49252458074017700, 21.71732809130244800 ) ) ; +#9222 = CARTESIAN_POINT ( 'NONE', ( 8.050377550081448100, -100.0000000000000100, 2.274277673961572400 ) ) ; +#9223 = CARTESIAN_POINT ( 'NONE', ( 33.90923765608688700, -26.35321215670989000, 16.90988292043697400 ) ) ; +#9224 = CARTESIAN_POINT ( 'NONE', ( 8.469389766504624700, -31.08742266763850300, 26.74019128457010600 ) ) ; +#9225 = EDGE_CURVE ( 'NONE', #10215, #6101, #3263, .T. ) ; +#9226 = CARTESIAN_POINT ( 'NONE', ( 4.490579821220204200, -30.92329616853660200, 23.41731770346238400 ) ) ; +#9227 = CARTESIAN_POINT ( 'NONE', ( 28.31629744980876500, -10.02134234577435400, -25.00376323139162700 ) ) ; +#9228 = DIRECTION ( 'NONE', ( 1.000000000000000000, -4.336808689942017700E-017, -7.646963822076800200E-018 ) ) ; +#9229 = CARTESIAN_POINT ( 'NONE', ( 11.41785009203952900, -9.799282964392332900, -24.99999999999999600 ) ) ; +#9230 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9231 = ADVANCED_FACE ( 'NONE', ( #6883 ), #4912, .T. ) ; +#9232 = CARTESIAN_POINT ( 'NONE', ( 15.12398412841449900, -12.50000000000002000, 8.383177254770394900 ) ) ; +#9233 = CARTESIAN_POINT ( 'NONE', ( 26.82009848262776300, -12.49999999999986000, -22.17100364864490600 ) ) ; +#9234 = CARTESIAN_POINT ( 'NONE', ( 35.79248963697714500, -10.00000000000000000, -25.15955346355904600 ) ) ; +#9235 = VECTOR ( 'NONE', #9293, 1000.000000000000000 ) ; +#9236 = ORIENTED_EDGE ( 'NONE', *, *, #6435, .T. ) ; +#9237 = CARTESIAN_POINT ( 'NONE', ( 31.17289632911997500, -23.74855332577469000, 16.51318828388881200 ) ) ; +#9238 = CARTESIAN_POINT ( 'NONE', ( 33.24972805580475200, -31.16865443534628400, 25.58204272352696400 ) ) ; +#9239 = CARTESIAN_POINT ( 'NONE', ( 11.05976269187610100, -30.78890933296953100, 27.88326359007251700 ) ) ; +#9240 = CARTESIAN_POINT ( 'NONE', ( 13.73183439151363500, -19.44119323193118000, 22.86774933998769300 ) ) ; +#9241 = CARTESIAN_POINT ( 'NONE', ( 15.12042294745516600, -12.50000000000000200, -12.76274804783990500 ) ) ; +#9242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669240300, -0.9848077530122092400 ) ) ; +#9243 = CARTESIAN_POINT ( 'NONE', ( 24.88072239732326500, -12.49999999999997200, -12.75913943401349800 ) ) ; +#9244 = CARTESIAN_POINT ( 'NONE', ( 4.909278596663354800, -12.49999999999989900, 10.24871995458944500 ) ) ; +#9245 = FACE_OUTER_BOUND ( 'NONE', #12425, .T. ) ; +#9246 = CARTESIAN_POINT ( 'NONE', ( 0.09708713634879612100, 10.18993461597465700, 17.13949627301117600 ) ) ; +#9247 = CARTESIAN_POINT ( 'NONE', ( 17.43057096096858800, -19.89443453945555300, 23.25532392124877000 ) ) ; +#9248 = CARTESIAN_POINT ( 'NONE', ( 9.835384982994103400, -95.07596123493894400, 15.52558084894683800 ) ) ; +#9249 = EDGE_CURVE ( 'NONE', #10725, #8083, #12572, .T. ) ; +#9250 = CARTESIAN_POINT ( 'NONE', ( 36.00851751184984600, -20.09099708629704000, 14.68806360477720400 ) ) ; +#9251 = ORIENTED_EDGE ( 'NONE', *, *, #11277, .F. ) ; +#9252 = CARTESIAN_POINT ( 'NONE', ( 37.50008036490041300, -20.02983397510548300, -12.58387565580926700 ) ) ; +#9253 = CARTESIAN_POINT ( 'NONE', ( -1.721170948820738300E-015, -10.00000000000000000, -20.00000000000001400 ) ) ; +#9254 = CARTESIAN_POINT ( 'NONE', ( 9.231023283176091000, -30.57374286593328300, 27.25566474418538500 ) ) ; +#9255 = CARTESIAN_POINT ( 'NONE', ( 35.27250743421154100, -29.20117066446124800, 23.96047905297137200 ) ) ; +#9256 = CARTESIAN_POINT ( 'NONE', ( 37.49981247946982400, -21.22229933567368200, 7.877582694835423300 ) ) ; +#9257 = CARTESIAN_POINT ( 'NONE', ( 11.57445408698909800, -20.04978044900920900, 22.01755927566103900 ) ) ; +#9258 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -26.55300927464481500, 7.631692956181476400 ) ) ; +#9259 = CARTESIAN_POINT ( 'NONE', ( 5.779819056269493800, -30.41283215383029100, 25.37207308538716400 ) ) ; +#9260 = CARTESIAN_POINT ( 'NONE', ( 24.13632548533266900, -24.22236170428707400, 19.88966845164992500 ) ) ; +#9261 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13603, #5793, #311, #8062 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 6.395593099774210300E-016, 0.0002332889620635538600 ), + .UNSPECIFIED. ) ; +#9262 = CARTESIAN_POINT ( 'NONE', ( 3.573589254885324500, -9.999999999999561200, -21.69295256265197100 ) ) ; +#9263 = DIRECTION ( 'NONE', ( 2.081668171172168100E-015, -1.214306433183764400E-015, -1.000000000000000000 ) ) ; +#9264 = CARTESIAN_POINT ( 'NONE', ( 22.46492841695715400, -19.90308215324895600, 23.25388404973226700 ) ) ; +#9265 = ORIENTED_EDGE ( 'NONE', *, *, #10312, .T. ) ; +#9266 = CARTESIAN_POINT ( 'NONE', ( 2.994918950691617600, -30.13751595963507400, 22.41505692057742700 ) ) ; +#9267 = CARTESIAN_POINT ( 'NONE', ( 31.25971949361878900, -30.43170714341059500, 27.04867636396118200 ) ) ; +#9268 = CARTESIAN_POINT ( 'NONE', ( 15.89222611306275300, -28.81138946052714200, 29.17993193273154900 ) ) ; +#9269 = CARTESIAN_POINT ( 'NONE', ( 7.324917076132557300, -30.02791496278280900, 26.29806166954431400 ) ) ; +#9270 = CARTESIAN_POINT ( 'NONE', ( 36.65326409147320400, -29.01947751958212200, 22.03358693811865600 ) ) ; +#9271 = CARTESIAN_POINT ( 'NONE', ( 5.415842926500907600, -22.03500000000001400, 10.92917130704227300 ) ) ; +#9272 = ORIENTED_EDGE ( 'NONE', *, *, #3309, .T. ) ; +#9273 = CARTESIAN_POINT ( 'NONE', ( 37.38127607174137500, -28.38133339307584500, 15.78558801199113000 ) ) ; +#9274 = CARTESIAN_POINT ( 'NONE', ( 11.05966201856206500, -30.84522177527344400, 27.87327597113989700 ) ) ; +#9275 = CARTESIAN_POINT ( 'NONE', ( 4.038296837677058300, -29.92152834681489500, 23.89072811371566400 ) ) ; +#9276 = CARTESIAN_POINT ( 'NONE', ( 5.331916169500634500, -94.93079257161778600, 14.64377435292250400 ) ) ; +#9277 = ORIENTED_EDGE ( 'NONE', *, *, #4903, .F. ) ; +#9278 = CARTESIAN_POINT ( 'NONE', ( 10.60340294532072700, -10.36288311643215500, -25.00000000000029100 ) ) ; +#9279 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10273, #9149, #3564, #11404, #4674, #12514, #5799, #13607, #6922, #315, #8068, #1405, #9202, #2497, #10314, #3610 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004988323141682240400, 0.0009976646283364480800, 0.001995329256672896200, 0.002494161570841116900, 0.002992993885009337300, 0.003491826199177558100, 0.003990658513345778400 ), + .UNSPECIFIED. ) ; +#9280 = CARTESIAN_POINT ( 'NONE', ( 12.95093844489439600, -30.77347370972987100, 28.36765821957190800 ) ) ; +#9281 = AXIS2_PLACEMENT_3D ( 'NONE', #11024, #4297, #12123 ) ; +#9282 = CARTESIAN_POINT ( 'NONE', ( 23.42347002178328800, -12.50000000000000400, -14.36748909543146800 ) ) ; +#9283 = CARTESIAN_POINT ( 'NONE', ( 31.72988248938186100, -9.999999999998211200, -24.57554873497873500 ) ) ; +#9284 = ORIENTED_EDGE ( 'NONE', *, *, #11668, .F. ) ; +#9285 = CARTESIAN_POINT ( 'NONE', ( 32.40839363190539800, -12.49999999999975300, 17.22135085123100900 ) ) ; +#9286 = CARTESIAN_POINT ( 'NONE', ( 33.29530703204871100, -30.32879961198512200, 25.99684240254724800 ) ) ; +#9287 = CARTESIAN_POINT ( 'NONE', ( 11.16300390312567200, -30.82952424217027600, 27.90731601946225700 ) ) ; +#9288 = CARTESIAN_POINT ( 'NONE', ( 15.22629870525031500, -19.69906115425666500, 23.12250474519127900 ) ) ; +#9289 = CARTESIAN_POINT ( 'NONE', ( 5.406099794424537000, -22.06128431888665600, -15.12068084134124400 ) ) ; +#9290 = CARTESIAN_POINT ( 'NONE', ( 34.01785491774054300, -21.82646722401017700, -16.80476014645098800 ) ) ; +#9291 = EDGE_LOOP ( 'NONE', ( #12475, #3063, #1704, #6703 ) ) ; +#9292 = EDGE_CURVE ( 'NONE', #13049, #13964, #8473, .T. ) ; +#9293 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9294 = CARTESIAN_POINT ( 'NONE', ( 27.24413697430805200, -94.71799171678635800, 18.33246086801064200 ) ) ; +#9295 = CARTESIAN_POINT ( 'NONE', ( 15.15865179849084600, -95.07596123493894400, 17.80158384680237700 ) ) ; +#9296 = CARTESIAN_POINT ( 'NONE', ( 34.78749249498620300, -19.49956441778244100, 16.91084155140744000 ) ) ; +#9297 = VERTEX_POINT ( 'NONE', #1346 ) ; +#9298 = CARTESIAN_POINT ( 'NONE', ( 25.43167299497883200, -20.42679231310011900, -26.58141254473664400 ) ) ; +#9299 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #8196, #6728, ( #46 ) ) ; +#9300 = CARTESIAN_POINT ( 'NONE', ( 37.79875055962731500, -18.80499776149059300, -11.53187062879839800 ) ) ; +#9301 = CARTESIAN_POINT ( 'NONE', ( 9.341502017153976200, -31.00209832228337000, 27.19744788142413900 ) ) ; +#9302 = CARTESIAN_POINT ( 'NONE', ( 35.72130705601227900, -30.25310262944683300, 24.15768959616004400 ) ) ; +#9303 = AXIS2_PLACEMENT_3D ( 'NONE', #7475, #926, #2029 ) ; +#9304 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -7.520606794341281500, 25.00000000000000000 ) ) ; +#9305 = ADVANCED_FACE ( 'NONE', ( #10227 ), #5660, .F. ) ; +#9306 = ORIENTED_EDGE ( 'NONE', *, *, #8178, .F. ) ; +#9307 = CARTESIAN_POINT ( 'NONE', ( 2.896167307640973700, -20.93265668282412100, 11.42503675040491200 ) ) ; +#9308 = CARTESIAN_POINT ( 'NONE', ( 6.006199271525774800, -29.49942923367211400, 25.24553954540956400 ) ) ; +#9309 = CARTESIAN_POINT ( 'NONE', ( 32.43717132087154900, -23.55737434815597100, 15.14674503481322500 ) ) ; +#9310 = CARTESIAN_POINT ( 'NONE', ( 4.207510363018157000, -10.00000000000000200, -25.15955346356274400 ) ) ; +#9311 = CARTESIAN_POINT ( 'NONE', ( 14.50598469338229900, -97.51216685056925800, 21.91131304307402800 ) ) ; +#9312 = CARTESIAN_POINT ( 'NONE', ( 0.9847505229006606700, -10.00000000000000400, -17.53431316624966700 ) ) ; +#9313 = ORIENTED_EDGE ( 'NONE', *, *, #3415, .F. ) ; +#9314 = EDGE_CURVE ( 'NONE', #8776, #1180, #13889, .T. ) ; +#9315 = CARTESIAN_POINT ( 'NONE', ( 3.677157535642657100, -29.05382216817813300, 22.60326773269385800 ) ) ; +#9316 = CARTESIAN_POINT ( 'NONE', ( 31.25971967228349900, -30.89345395453344500, 26.96726206667272400 ) ) ; +#9317 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561060996500, 7.000000000000000000, -20.68999999999999400 ) ) ; +#9318 = CARTESIAN_POINT ( 'NONE', ( 7.509411480591071900, -31.01523985946048300, 26.24027621890740400 ) ) ; +#9319 = CARTESIAN_POINT ( 'NONE', ( 37.21835612387145200, -30.16931264183554300, 21.82373196289238800 ) ) ; +#9320 = ORIENTED_EDGE ( 'NONE', *, *, #6295, .F. ) ; +#9321 = CARTESIAN_POINT ( 'NONE', ( 19.21713097368460100, -28.74563066252062900, 29.19463954380760400 ) ) ; +#9322 = DIRECTION ( 'NONE', ( -0.4174883340625316600, 0.03332900164317953400, 0.9080708499732611500 ) ) ; +#9323 = AXIS2_PLACEMENT_3D ( 'NONE', #970, #8758, #2068 ) ; +#9324 = CARTESIAN_POINT ( 'NONE', ( 4.679048678383598900, -30.99851586800502500, 23.54034632462080300 ) ) ; +#9325 = LINE ( 'NONE', #8442, #9132 ) ; +#9326 = CARTESIAN_POINT ( 'NONE', ( 28.01512580115776200, -10.15232558920127000, 24.97314088877150700 ) ) ; +#9327 = VERTEX_POINT ( 'NONE', #10264 ) ; +#9328 = CARTESIAN_POINT ( 'NONE', ( 10.21221296776149100, -11.22097292470531800, -25.05003506702758300 ) ) ; +#9329 = CARTESIAN_POINT ( 'NONE', ( 30.66533586951381100, -19.66773407007798700, -24.66684390203853600 ) ) ; +#9330 = CARTESIAN_POINT ( 'NONE', ( 7.614585162777570000, -28.34770659563877600, 24.83266624212497200 ) ) ; +#9331 = CARTESIAN_POINT ( 'NONE', ( 26.18990616986520000, -20.84135145327517000, -23.84437757474702500 ) ) ; +#9332 = CARTESIAN_POINT ( 'NONE', ( 23.66292631866175000, -19.18949841699696900, 23.36467695346058100 ) ) ; +#9333 = CARTESIAN_POINT ( 'NONE', ( 24.49344142327553400, -12.50000000000001200, 9.120129297270747100 ) ) ; +#9334 = EDGE_CURVE ( 'NONE', #11717, #9327, #12844, .T. ) ; +#9335 = CARTESIAN_POINT ( 'NONE', ( 33.20125603480811100, -31.05958084047659200, 25.72519927425204900 ) ) ; +#9336 = CARTESIAN_POINT ( 'NONE', ( 11.16300362044612600, -30.81332054419348800, 27.91017308624745000 ) ) ; +#9337 = CARTESIAN_POINT ( 'NONE', ( 16.73089208058644300, -19.94747027589875200, 23.23450803333023300 ) ) ; +#9338 = CARTESIAN_POINT ( 'NONE', ( 5.573225758459034100, -12.50000000000005700, -14.37220568871777200 ) ) ; +#9339 = CARTESIAN_POINT ( 'NONE', ( 34.98239806677175800, -22.40088605801207000, -12.68652196748736900 ) ) ; +#9340 = CARTESIAN_POINT ( 'NONE', ( 32.82729892118907600, -12.49999999999783100, -17.52676639998623600 ) ) ; +#9341 = FACE_OUTER_BOUND ( 'NONE', #10188, .T. ) ; +#9342 = ORIENTED_EDGE ( 'NONE', *, *, #2516, .F. ) ; +#9343 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -22.46243069294101600, -27.19746277637470700 ) ) ; +#9344 = CARTESIAN_POINT ( 'NONE', ( 30.37363624595070300, -95.07596123493894400, 15.43886966067670300 ) ) ; +#9345 = CARTESIAN_POINT ( 'NONE', ( 28.94108954381912800, -30.78730566485509400, 27.88443474009548200 ) ) ; +#9346 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#9347 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10004, #2185, #4411, #12244, #5513, #13351, #6649, #56, #7795, #1143, #8929, #2229, #10052, #3337, #11186, #4462, #12288, #5565, #13392, #6700, #99, #7840, #1192, #8978, #2278, #10104, #3386, #11231, #4502, #12337 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.003527582251422307500, 0.004945495886850918500, 0.006363409522279529900, 0.009199236793136741600, 0.01061715042856534000, 0.01203506406399393800, 0.01487089133485115300, 0.01628880497027975300, 0.01770671860570835800, 0.02054254587656557200, 0.02337837314742279000, 0.02479628678285139900, 0.02550524360056570200, 0.02585972200942285000, 0.02621420041828000100 ), + .UNSPECIFIED. ) ; +#9348 = CARTESIAN_POINT ( 'NONE', ( 33.92693994792657700, -19.04813239701577000, 18.19912134179205400 ) ) ; +#9349 = VERTEX_POINT ( 'NONE', #11725 ) ; +#9350 = CARTESIAN_POINT ( 'NONE', ( 12.36925762248589700, -11.65335147410251300, 24.56011631062333200 ) ) ; +#9351 = CARTESIAN_POINT ( 'NONE', ( 9.328508034528290700, -30.68583581026469200, 27.28390034243430800 ) ) ; +#9352 = CARTESIAN_POINT ( 'NONE', ( 35.25300249838778700, -31.01194524273253700, 23.62461741249948200 ) ) ; +#9353 = LINE ( 'NONE', #14200, #5817 ) ; +#9354 = ORIENTED_EDGE ( 'NONE', *, *, #3476, .T. ) ; +#9355 = CARTESIAN_POINT ( 'NONE', ( 36.17943688925178200, -94.17021105057594400, 6.064776497721506800 ) ) ; +#9356 = CARTESIAN_POINT ( 'NONE', ( 6.082959519463671900, -30.67419233223955600, 25.48151008525211100 ) ) ; +#9357 = CARTESIAN_POINT ( 'NONE', ( 34.99370676569357400, -22.55661050600592100, 7.973141115008098200 ) ) ; +#9358 = CARTESIAN_POINT ( 'NONE', ( 9.108942649313975800, -12.50000000000109200, 18.84562777577458400 ) ) ; +#9359 = CARTESIAN_POINT ( 'NONE', ( 9.029660134404760900, -12.60019294806899200, -24.88868598540287300 ) ) ; +#9360 = CARTESIAN_POINT ( 'NONE', ( 16.99029097396779900, -19.91501240568266300, 23.24858852876504800 ) ) ; +#9361 = CARTESIAN_POINT ( 'NONE', ( 8.074959370700424800, -20.33903573856372300, -23.48694198763993800 ) ) ; +#9362 = ORIENTED_EDGE ( 'NONE', *, *, #8555, .F. ) ; +#9363 = CARTESIAN_POINT ( 'NONE', ( 3.585031398043074400, -30.58114044311713900, 22.54386956172442100 ) ) ; +#9364 = CARTESIAN_POINT ( 'NONE', ( 31.05176411652181700, -30.32739708787185500, 27.13393685577794700 ) ) ; +#9365 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000107500, -29.42335303826715900, 21.65966884426559200 ) ) ; +#9366 = CARTESIAN_POINT ( 'NONE', ( 7.466973560016075600, -30.35496601100624000, 26.43036000601702500 ) ) ; +#9367 = CARTESIAN_POINT ( 'NONE', ( 36.32654377674919000, -28.92436383270363000, 22.22266649110131800 ) ) ; +#9368 = AXIS2_PLACEMENT_3D ( 'NONE', #14092, #2983, #10827 ) ; +#9369 = CARTESIAN_POINT ( 'NONE', ( 4.194705706049872700, -30.23752464435034800, 24.06089375996515400 ) ) ; +#9370 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -7.520606794341276200, 25.00000000000000000 ) ) ; +#9371 = VERTEX_POINT ( 'NONE', #3835 ) ; +#9372 = CARTESIAN_POINT ( 'NONE', ( 9.148140354539711100, -12.52367734734946800, -24.99999999999999600 ) ) ; +#9373 = CARTESIAN_POINT ( 'NONE', ( 17.65009222793003500, -33.18274856558009100, 28.41225594090786200 ) ) ; +#9374 = CARTESIAN_POINT ( 'NONE', ( 26.22234149405410600, -19.68229756068969700, -26.70725029519764600 ) ) ; +#9375 = ADVANCED_FACE ( 'NONE', ( #11421 ), #4421, .T. ) ; +#9376 = CARTESIAN_POINT ( 'NONE', ( 3.879945075942130600, -29.35197354610776800, 24.48337328031691100 ) ) ; +#9377 = CARTESIAN_POINT ( 'NONE', ( 25.45461006573734900, -12.50000000000026600, -22.58705492390005200 ) ) ; +#9378 = EDGE_CURVE ( 'NONE', #4636, #3383, #8445, .T. ) ; +#9379 = CARTESIAN_POINT ( 'NONE', ( 34.02786662288527700, -19.05388380991204000, 18.07726421576538900 ) ) ; +#9380 = CARTESIAN_POINT ( 'NONE', ( 33.68210077391250900, -23.27459523856328600, 13.12198553712634200 ) ) ; +#9381 = CARTESIAN_POINT ( 'NONE', ( 33.05933723400681900, -30.03980276865495800, 26.08731017750884000 ) ) ; +#9382 = CARTESIAN_POINT ( 'NONE', ( 2.569376894286036900, -28.58846050321279000, 13.95428480444522600 ) ) ; +#9383 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001100, 27.93780948130458700 ) ) ; +#9384 = CARTESIAN_POINT ( 'NONE', ( 39.97161784026550900, 9.894538436513098400, 16.11193963103031400 ) ) ; +#9385 = CARTESIAN_POINT ( 'NONE', ( 14.99999999614813200, -12.49999999999999500, -12.05643919643006800 ) ) ; +#9386 = CARTESIAN_POINT ( 'NONE', ( 30.14566617672583200, -21.12252359045446700, -21.83636057995615700 ) ) ; +#9387 = CARTESIAN_POINT ( 'NONE', ( 24.56693102440849300, -12.50000000000000400, -13.42280166143688400 ) ) ; +#9388 = ORIENTED_EDGE ( 'NONE', *, *, #12026, .F. ) ; +#9389 = AXIS2_PLACEMENT_3D ( 'NONE', #836, #8619, #1932 ) ; +#9390 = CARTESIAN_POINT ( 'NONE', ( 34.66509586505558400, -95.07596123493894400, 14.35557039344278600 ) ) ; +#9391 = CARTESIAN_POINT ( 'NONE', ( 30.96679053419071100, -30.32071902827599200, 27.16930822054129300 ) ) ; +#9392 = CARTESIAN_POINT ( 'NONE', ( 5.644131370910590900, -99.99999999999998600, -29.69330526753332200 ) ) ; +#9393 = CARTESIAN_POINT ( 'NONE', ( 31.59785275255328700, -20.20832624964915400, 20.12072572635764800 ) ) ; +#9394 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.22545495475951300, 15.70974943198089400 ) ) ; +#9395 = CARTESIAN_POINT ( 'NONE', ( 9.342184152225621900, -30.39965896494570400, 27.30206997219156100 ) ) ; +#9396 = CARTESIAN_POINT ( 'NONE', ( 35.60670237319479300, -30.00408907476271000, 24.29586602536005200 ) ) ; +#9397 = CARTESIAN_POINT ( 'NONE', ( 39.92214158203962200, 10.13070237256533300, -18.20976545616826300 ) ) ; +#9398 = EDGE_CURVE ( 'NONE', #950, #11411, #13181, .T. ) ; +#9399 = APPROVAL_PERSON_ORGANIZATION ( #9414, #8007, #5592 ) ; +#9400 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999985800, 51.02052347080197600, 26.62899292861736500 ) ) ; +#9401 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#9402 = CARTESIAN_POINT ( 'NONE', ( 6.181226145363711800, -29.75303868105103400, 25.51075170608699900 ) ) ; +#9403 = VERTEX_POINT ( 'NONE', #9528 ) ; +#9404 = CARTESIAN_POINT ( 'NONE', ( 16.12840789357330400, -12.49999999999999600, 9.719031160225108900 ) ) ; +#9405 = CARTESIAN_POINT ( 'NONE', ( 27.05858531431058400, -13.07463790904197300, -25.54214161927312400 ) ) ; +#9406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#9407 = CARTESIAN_POINT ( 'NONE', ( 37.81486673790828900, -11.92747418448647800, -19.08876031342186500 ) ) ; +#9408 = CARTESIAN_POINT ( 'NONE', ( 3.335740194394638500, -29.41537231584256400, 22.75879055300627100 ) ) ; +#9409 = CARTESIAN_POINT ( 'NONE', ( -1.951959775878583400, -10.00000000000000400, 7.989792653605618100 ) ) ; +#9410 = CARTESIAN_POINT ( 'NONE', ( 31.06956327820551800, -30.74183746596705900, 27.10146953609652300 ) ) ; +#9411 = CARTESIAN_POINT ( 'NONE', ( 7.905331790818946700, -31.12685008247095600, 26.40385421675554800 ) ) ; +#9412 = CARTESIAN_POINT ( 'NONE', ( 37.37472254587009200, -29.84755262094667200, 22.03389262481284300 ) ) ; +#9413 = LINE ( 'NONE', #12522, #8745 ) ; +#9414 = PERSON_AND_ORGANIZATION ( #9068, #11176 ) ; +#9415 = ORIENTED_EDGE ( 'NONE', *, *, #985, .F. ) ; +#9416 = EDGE_CURVE ( 'NONE', #5747, #13127, #450, .T. ) ; +#9417 = CARTESIAN_POINT ( 'NONE', ( 4.659056103732431200, -29.18442189916624200, 23.87624206057476100 ) ) ; +#9418 = CARTESIAN_POINT ( 'NONE', ( 39.74111347767814100, -10.43389580702435600, -14.17614825884888100 ) ) ; +#9419 = CARTESIAN_POINT ( 'NONE', ( 36.65358350883553800, -14.32401828221910700, -20.05759993858859500 ) ) ; +#9420 = CARTESIAN_POINT ( 'NONE', ( 23.16027812979284000, -21.13621043054551800, -26.96361436175212800 ) ) ; +#9421 = CARTESIAN_POINT ( 'NONE', ( 22.97751498199302800, -12.50000000000000400, -14.50244259725161700 ) ) ; +#9422 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1468, #8287, #9264, #2709, #10536, #3818, #11660 ), + .UNSPECIFIED., .F., .F., + ( 4, 3, 4 ), + ( 0.0000000000000000000, 5.132250430588967900E-005, 0.0001018704953448612200 ), + .UNSPECIFIED. ) ; +#9423 = CIRCLE ( 'NONE', #3870, 1.200000000000013500 ) ; +#9424 = CARTESIAN_POINT ( 'NONE', ( 34.66703230849344000, -12.50000000000017900, 12.72647130930045400 ) ) ; +#9425 = CARTESIAN_POINT ( 'NONE', ( 33.09233630281787700, -30.77587508681934700, 26.00898473865136400 ) ) ; +#9426 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999990700, -28.03045011156593000, 7.500406278193993100 ) ) ; +#9427 = ORIENTED_EDGE ( 'NONE', *, *, #6494, .T. ) ; +#9428 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001100, 27.93780948130460100 ) ) ; +#9429 = CARTESIAN_POINT ( 'NONE', ( 27.42357585085599300, -22.39901742078230000, -26.37732703663493400 ) ) ; +#9430 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 9.500000000000000000, 20.00000000000000000 ) ) ; +#9431 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#9432 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#9433 = CARTESIAN_POINT ( 'NONE', ( 33.13706670159860600, -29.72903961159454800, 25.92251303046569400 ) ) ; +#9434 = CARTESIAN_POINT ( 'NONE', ( 12.29083753135673800, -99.99999999999998600, -37.21869687476576900 ) ) ; +#9435 = EDGE_CURVE ( 'NONE', #13127, #3931, #6859, .T. ) ; +#9436 = CARTESIAN_POINT ( 'NONE', ( 29.94010887626067300, -19.78497357598628900, 21.27873559572541500 ) ) ; +#9437 = CARTESIAN_POINT ( 'NONE', ( 37.33339004992512900, -21.03920819337020400, 10.12724624995081300 ) ) ; +#9438 = CARTESIAN_POINT ( 'NONE', ( 9.630442513962545800, -30.77195137206545500, 27.39071922720691900 ) ) ; +#9439 = CARTESIAN_POINT ( 'NONE', ( 35.21720650597389800, -30.97685425937509500, 23.78214842102425000 ) ) ; +#9440 = ORIENTED_EDGE ( 'NONE', *, *, #6452, .F. ) ; +#9441 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -95.07596123493895800, 11.50239124669685300 ) ) ; +#9442 = CARTESIAN_POINT ( 'NONE', ( 30.97906540605579200, -93.15154685884795100, 21.51732474365693200 ) ) ; +#9443 = ADVANCED_FACE ( 'NONE', ( #2849 ), #5562, .T. ) ; +#9444 = DIRECTION ( 'NONE', ( -0.9998119252976104300, -0.01909902633348447800, -0.003367673647854805200 ) ) ; +#9445 = CARTESIAN_POINT ( 'NONE', ( 4.111556705447284800, -22.64217785379563700, 14.41905430795607800 ) ) ; +#9446 = CARTESIAN_POINT ( 'NONE', ( 32.42366016038450700, -10.31060538292924600, 23.51890351682418900 ) ) ; +#9447 = CARTESIAN_POINT ( 'NONE', ( 6.266192610192215200, -31.00813866550809900, 25.35791565621243000 ) ) ; +#9448 = ORIENTED_EDGE ( 'NONE', *, *, #11935, .T. ) ; +#9449 = CARTESIAN_POINT ( 'NONE', ( 39.52659823195964600, -11.89368809818828500, 7.987098284644569700 ) ) ; +#9450 = CARTESIAN_POINT ( 'NONE', ( 11.28586399468438600, -24.00574700535220900, 18.34793380023925700 ) ) ; +#9451 = CARTESIAN_POINT ( 'NONE', ( 22.55762127725338200, -27.96664356551895700, 27.45669629599068900 ) ) ; +#9452 = CARTESIAN_POINT ( 'NONE', ( 39.97161784026551600, 9.894538436513098400, -1.388060368969691100 ) ) ; +#9453 = CARTESIAN_POINT ( 'NONE', ( 0.0006240198881731465400, -9.999999999999953800, 8.167710065770119600 ) ) ; +#9454 = ORIENTED_EDGE ( 'NONE', *, *, #10330, .T. ) ; +#9455 = CARTESIAN_POINT ( 'NONE', ( 30.95176447180185200, -30.32466667215602000, 27.17622229823899400 ) ) ; +#9456 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9457 = CARTESIAN_POINT ( 'NONE', ( 7.845538154104730200, -30.56926731956587400, 26.61461588274164900 ) ) ; +#9458 = CARTESIAN_POINT ( 'NONE', ( 36.32471743554026500, -30.66002196586875400, 21.91718086138804000 ) ) ; +#9459 = ORIENTED_EDGE ( 'NONE', *, *, #11091, .F. ) ; +#9460 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#9461 = CARTESIAN_POINT ( 'NONE', ( 4.379287780987458400, -30.55858311357153000, 24.01706540866785700 ) ) ; +#9462 = CARTESIAN_POINT ( 'NONE', ( 2.882855438735055100, -21.51627013048585400, -15.25431279704805700 ) ) ; +#9463 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9464 = CARTESIAN_POINT ( 'NONE', ( -8.445451669819391400E-016, -12.50000000000000200, -14.54982113999828100 ) ) ; +#9465 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -100.0000000000000100, -5.267905492818148800 ) ) ; +#9466 = CARTESIAN_POINT ( 'NONE', ( 29.55501697421159700, -30.77248963172253200, 27.68908019559688300 ) ) ; +#9467 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, -11.53187062879840900 ) ) ; +#9468 = CARTESIAN_POINT ( 'NONE', ( 22.56531906876188400, -19.89044458371830300, 23.25606890795235100 ) ) ; +#9469 = ORIENTED_EDGE ( 'NONE', *, *, #10427, .T. ) ; +#9470 = AXIS2_PLACEMENT_3D ( 'NONE', #8565, #1883, #9693 ) ; +#9471 = CARTESIAN_POINT ( 'NONE', ( 23.98205528284681900, -20.77559829398724000, -24.31228172792333800 ) ) ; +#9472 = CARTESIAN_POINT ( 'NONE', ( 36.84650860548166000, -28.83552093232823000, 20.56463820890627800 ) ) ; +#9473 = CARTESIAN_POINT ( 'NONE', ( 24.81009776473644000, -12.50000000000000400, 8.549569985761809900 ) ) ; +#9474 = CARTESIAN_POINT ( 'NONE', ( 32.90861920539234100, -29.81455801062362800, 26.09318392465838000 ) ) ; +#9475 = DIRECTION ( 'NONE', ( -5.327447116441166800E-016, -3.469446951953615200E-016, 1.000000000000000000 ) ) ; +#9476 = ORIENTED_EDGE ( 'NONE', *, *, #3708, .T. ) ; +#9477 = CARTESIAN_POINT ( 'NONE', ( 28.23955314646851600, -10.00000000000027000, -24.99999999999998900 ) ) ; +#9478 = CARTESIAN_POINT ( 'NONE', ( 36.57611428299779300, -21.66606959888438400, -17.11172349298765000 ) ) ; +#9479 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.08917743608633100, 7.821172174202381200 ) ) ; +#9480 = SPHERICAL_SURFACE ( 'NONE', #14015, 2.500000000000000000 ) ; +#9481 = EDGE_CURVE ( 'NONE', #1680, #3158, #5103, .T. ) ; +#9482 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9483 = CARTESIAN_POINT ( 'NONE', ( 35.11001560114333100, -29.21185883617095400, 24.11812814123123500 ) ) ; +#9484 = CARTESIAN_POINT ( 'NONE', ( 36.42420708896028700, -28.86076807073645500, 21.75925883944426400 ) ) ; +#9485 = ORIENTED_EDGE ( 'NONE', *, *, #3264, .F. ) ; +#9486 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13437, #6744, #149, #7885 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001725576003977383200 ), + .UNSPECIFIED. ) ; +#9487 = CARTESIAN_POINT ( 'NONE', ( 28.62664850696258900, -19.44922710519615100, 22.03065703529852500 ) ) ; +#9488 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#9489 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #7661, #1217, ( #12290 ) ) ; +#9490 = CARTESIAN_POINT ( 'NONE', ( 29.21296665289849400, -20.08134807875723000, 21.64163952557929300 ) ) ; +#9491 = CARTESIAN_POINT ( 'NONE', ( 9.637505158472860600, -30.49306962918111100, 27.42133444195665600 ) ) ; +#9492 = CARTESIAN_POINT ( 'NONE', ( 35.42516830289649500, -29.60899571980695200, 24.24387684915214100 ) ) ; +#9493 = ORIENTED_EDGE ( 'NONE', *, *, #4696, .T. ) ; +#9494 = AXIS2_PLACEMENT_3D ( 'NONE', #11826, #1774, #12936 ) ; +#9495 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -95.24421259200012500, 8.331288511292605400 ) ) ; +#9496 = CARTESIAN_POINT ( 'NONE', ( 26.66239543568644500, -97.50831987628993100, 21.75727194542557900 ) ) ; +#9497 = VECTOR ( 'NONE', #13827, 1000.000000000000000 ) ; +#9498 = CARTESIAN_POINT ( 'NONE', ( 27.48014821136291600, -10.56613187149480900, 24.90017567641649200 ) ) ; +#9499 = CARTESIAN_POINT ( 'NONE', ( 12.18570277748077200, -20.12953699311228600, 22.23412810415379300 ) ) ; +#9500 = CARTESIAN_POINT ( 'NONE', ( 27.50644505228098400, -10.02417599027539600, 25.00000000000000000 ) ) ; +#9501 = CARTESIAN_POINT ( 'NONE', ( 6.173131869779314900, -30.14534154417735200, 25.63885924543548000 ) ) ; +#9502 = CARTESIAN_POINT ( 'NONE', ( 39.99937597433519400, -10.00000000000017800, 8.167710817425783500 ) ) ; +#9503 = CARTESIAN_POINT ( 'NONE', ( 11.90112094854114300, -12.50000000000002800, 20.74013596070633600 ) ) ; +#9504 = CARTESIAN_POINT ( 'NONE', ( 12.87506238383456900, -10.94937602516058700, 24.83259939192645400 ) ) ; +#9505 = EDGE_CURVE ( 'NONE', #1534, #3931, #7617, .T. ) ; +#9506 = CARTESIAN_POINT ( 'NONE', ( 0.5026386805702562900, -11.89222024981857100, 9.029921387703202700 ) ) ; +#9507 = FACE_OUTER_BOUND ( 'NONE', #1209, .T. ) ; +#9508 = ORIENTED_EDGE ( 'NONE', *, *, #3834, .F. ) ; +#9509 = CARTESIAN_POINT ( 'NONE', ( 30.97086798733947400, -30.65956157931987700, 27.16098201169129600 ) ) ; +#9510 = CIRCLE ( 'NONE', #8762, 3.189999999999995100 ) ; +#9511 = CARTESIAN_POINT ( 'NONE', ( 12.51458996109605000, -27.27891878870175500, 21.10955026380087300 ) ) ; +#9512 = CARTESIAN_POINT ( 'NONE', ( 7.905487483443495800, -30.01886178931804800, 26.59893611378720000 ) ) ; +#9513 = CARTESIAN_POINT ( 'NONE', ( 37.20876037444018900, -29.52898585019336500, 22.20302303481674900 ) ) ; +#9514 = VERTEX_POINT ( 'NONE', #631 ) ; +#9515 = AXIS2_PLACEMENT_3D ( 'NONE', #13935, #7256, #12843 ) ; +#9516 = CARTESIAN_POINT ( 'NONE', ( 4.507606687473090900, -29.50337951484158000, 24.09374193393707100 ) ) ; +#9517 = CARTESIAN_POINT ( 'NONE', ( 13.92382043722661500, -31.95460249791204200, 20.70678011832628600 ) ) ; +#9518 = CARTESIAN_POINT ( 'NONE', ( 37.45956431534597200, -95.07596123493894400, -3.476174004075622400 ) ) ; +#9519 = CARTESIAN_POINT ( 'NONE', ( 39.15519715456893100, -10.71063124645077000, 14.11088388208542100 ) ) ; +#9520 = CARTESIAN_POINT ( 'NONE', ( 33.37584989280667000, -22.03500000000001400, 13.97640391700218900 ) ) ; +#9521 = CIRCLE ( 'NONE', #7383, 1.200000000000005700 ) ; +#9522 = CARTESIAN_POINT ( 'NONE', ( 29.55553183742087600, -30.89985581616068800, 27.66191092736633200 ) ) ; +#9523 = CARTESIAN_POINT ( 'NONE', ( 31.41056608381879300, -97.40649683660852500, 20.60758877244006700 ) ) ; +#9524 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9525 = ADVANCED_FACE ( 'NONE', ( #7956 ), #14341, .F. ) ; +#9526 = CARTESIAN_POINT ( 'NONE', ( 22.43866206969477900, -30.66176281334873700, 28.85677374700786000 ) ) ; +#9527 = EDGE_LOOP ( 'NONE', ( #13755, #13318, #1914, #2255, #2436, #2609, #2663, #2748 ) ) ; +#9528 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -12.50000000000001100, 10.14164662228683300 ) ) ; +#9529 = CARTESIAN_POINT ( 'NONE', ( 34.36304388232544900, -23.04613268467514300, 11.48152309503618800 ) ) ; +#9530 = EDGE_CURVE ( 'NONE', #12439, #7844, #6530, .T. ) ; +#9531 = CARTESIAN_POINT ( 'NONE', ( 33.02171601182846000, -30.56847708680862400, 26.13883585051482000 ) ) ; +#9532 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#9533 = ORIENTED_EDGE ( 'NONE', *, *, #8374, .T. ) ; +#9534 = CARTESIAN_POINT ( 'NONE', ( 28.38209302063665600, -10.20414664947988300, -25.03599656232448500 ) ) ; +#9535 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438938600, 7.000000000000000900, 20.69000000000000100 ) ) ; +#9536 = CARTESIAN_POINT ( 'NONE', ( 16.66313515305319400, -20.76638485836688700, -24.37746346823259800 ) ) ; +#9537 = VECTOR ( 'NONE', #9488, 1000.000000000000000 ) ; +#9538 = CARTESIAN_POINT ( 'NONE', ( 36.16988456615024500, -10.00000000000000000, -24.86121076501353500 ) ) ; +#9539 = CARTESIAN_POINT ( 'NONE', ( 35.90067610375312100, -29.02488639034727300, 23.04544241999616700 ) ) ; +#9540 = CARTESIAN_POINT ( 'NONE', ( 11.54267901976424300, -100.0000000000000000, 20.99909610644411700 ) ) ; +#9541 = VERTEX_POINT ( 'NONE', #7473 ) ; +#9542 = CARTESIAN_POINT ( 'NONE', ( 27.25089201975605800, -19.16544412871780500, 22.64884997664950800 ) ) ; +#9543 = CARTESIAN_POINT ( 'NONE', ( 31.22029156406641800, -94.73436467618633100, 17.06123319002351500 ) ) ; +#9544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#9545 = CARTESIAN_POINT ( 'NONE', ( 9.834669167752110800, -30.86646617775674900, 27.44698002169030100 ) ) ; +#9546 = CARTESIAN_POINT ( 'NONE', ( 35.42517798944226800, -30.70725568049036300, 24.05023117425158200 ) ) ; +#9547 = ORIENTED_EDGE ( 'NONE', *, *, #4921, .F. ) ; +#9548 = CARTESIAN_POINT ( 'NONE', ( 36.14600097093659100, -94.17920530917916700, 6.208122608113443500 ) ) ; +#9549 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -19.99999999999999600 ) ) ; +#9550 = CARTESIAN_POINT ( 'NONE', ( 2.500134557896763100, -20.41717125179868100, 7.752439079678538300 ) ) ; +#9551 = CARTESIAN_POINT ( 'NONE', ( 5.331020412902657500, -94.97301868515216900, 14.62411301269929700 ) ) ; +#9552 = CARTESIAN_POINT ( 'NONE', ( 6.496915847846944200, -31.16688268067347400, 25.37841082980930500 ) ) ; +#9553 = CARTESIAN_POINT ( 'NONE', ( 41.91826791566886400, -10.00000000000000500, 9.174257171628990900 ) ) ; +#9554 = CARTESIAN_POINT ( 'NONE', ( 16.57652997821539700, -12.50000000000000200, 9.959314577719579700 ) ) ; +#9555 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999990100, -22.49999999999998900, -14.54982113999828100 ) ) ; +#9556 = CARTESIAN_POINT ( 'NONE', ( -1.297144627579577000, -10.00000000000000000, 13.08768779949403300 ) ) ; +#9557 = ORIENTED_EDGE ( 'NONE', *, *, #5376, .F. ) ; +#9558 = CARTESIAN_POINT ( 'NONE', ( 30.95270641785198500, -31.02840378289292600, 27.05429600478089500 ) ) ; +#9559 = CARTESIAN_POINT ( 'NONE', ( 8.809695823441623800, -20.50592124487619800, 20.33288871347170000 ) ) ; +#9560 = CARTESIAN_POINT ( 'NONE', ( 8.044341968074977700, -30.71654418961567500, 26.68233028142974900 ) ) ; +#9561 = CARTESIAN_POINT ( 'NONE', ( 36.46853017652293300, -30.60231818695553900, 22.02382989327338000 ) ) ; +#9562 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999354300, -95.19591800743057800, 10.91472003791044700 ) ) ; +#9563 = CARTESIAN_POINT ( 'NONE', ( 4.721946402829076700, -30.91268421514582700, 23.84655442672980300 ) ) ; +#9564 = CARTESIAN_POINT ( 'NONE', ( 9.597939194396897000, -32.67673390148094400, 26.84857170127783000 ) ) ; +#9565 = CARTESIAN_POINT ( 'NONE', ( 36.02692829303618500, -89.69640923368798700, 2.374388476379068400 ) ) ; +#9566 = CARTESIAN_POINT ( 'NONE', ( 30.18167656173557800, -100.0000000000000100, 3.977574556406460200 ) ) ; +#9567 = CARTESIAN_POINT ( 'NONE', ( 29.24748304486990900, -30.76913041566140400, 27.79034643739674900 ) ) ; +#9568 = CARTESIAN_POINT ( 'NONE', ( 24.32375734990285600, -100.0000000000000700, 21.63057173623876000 ) ) ; +#9569 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9570 = CARTESIAN_POINT ( 'NONE', ( 27.73732617943343800, -10.35362453404305100, 24.93764645360775500 ) ) ; +#9571 = EDGE_CURVE ( 'NONE', #1534, #4574, #5286, .T. ) ; +#9572 = CARTESIAN_POINT ( 'NONE', ( 3.547095015904203400, -30.54946208317066700, 21.46110543358272300 ) ) ; +#9573 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, 20.00000000000000000 ) ) ; +#9574 = CARTESIAN_POINT ( 'NONE', ( 34.97320296143176700, -12.50000000000059000, 11.29206099690395100 ) ) ; +#9575 = CARTESIAN_POINT ( 'NONE', ( 32.90298370224344600, -31.16429338289541900, 25.84630172854472000 ) ) ; +#9576 = CARTESIAN_POINT ( 'NONE', ( 2.858001648764288700, -30.28418555501302500, 21.50788084569212100 ) ) ; +#9577 = CARTESIAN_POINT ( 'NONE', ( 29.27051193771232800, -10.27119737093020300, -24.99999999999970200 ) ) ; +#9578 = DIRECTION ( 'NONE', ( -4.336808689942017100E-017, -1.000000000000000000, -3.469446951953615200E-016 ) ) ; +#9579 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -97.53410728581289400, 14.05303623855198600 ) ) ; +#9580 = CARTESIAN_POINT ( 'NONE', ( 15.46797776379336600, -12.49999999999954500, -22.77589057568469500 ) ) ; +#9581 = CIRCLE ( 'NONE', #4876, 9.999999999999996400 ) ; +#9582 = CARTESIAN_POINT ( 'NONE', ( 13.79433263080547800, -15.11196057055547600, 24.02504541113937000 ) ) ; +#9583 = CARTESIAN_POINT ( 'NONE', ( 36.23663582328354900, -28.94571624100557700, 22.42312171720696800 ) ) ; +#9584 = CARTESIAN_POINT ( 'NONE', ( 2.202743003830879500, -18.81097201532339400, 8.005331014629296900 ) ) ; +#9585 = DATE_AND_TIME ( #9793, #9948 ) ; +#9586 = CARTESIAN_POINT ( 'NONE', ( 25.26155302080898600, -19.96870814629623700, 22.98189529874182900 ) ) ; +#9587 = CARTESIAN_POINT ( 'NONE', ( 13.73942475912039800, -12.49999999999985400, 21.48249940461845500 ) ) ; +#9588 = VERTEX_POINT ( 'NONE', #1930 ) ; +#9589 = CARTESIAN_POINT ( 'NONE', ( -2.341876692568689600E-014, -7.511547099453295600, 19.99999999999996400 ) ) ; +#9590 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999969400, -20.00069905418667200, -11.72603109299549300 ) ) ; +#9591 = CARTESIAN_POINT ( 'NONE', ( 9.834666456382136000, -30.62116533922718300, 27.49023245829781100 ) ) ; +#9592 = CARTESIAN_POINT ( 'NONE', ( 35.05974965677920400, -29.30295299104523500, 24.26565863596285100 ) ) ; +#9593 = CARTESIAN_POINT ( 'NONE', ( 8.681985818249129800, -23.72889738542356500, 16.37146309565987700 ) ) ; +#9594 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -91.87365618056748000, -1.973424355169022300 ) ) ; +#9595 = EDGE_CURVE ( 'NONE', #6982, #11213, #6872, .T. ) ; +#9596 = CARTESIAN_POINT ( 'NONE', ( 2.696064180876876400, -18.90065628665947600, 11.77505634360401200 ) ) ; +#9597 = ADVANCED_FACE ( 'NONE', ( #6516 ), #5649, .F. ) ; +#9598 = CARTESIAN_POINT ( 'NONE', ( 2.500216889847408200, -21.22584127889994200, 7.871090290661435100 ) ) ; +#9599 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141808200, -28.87043262030299900, 21.75755471858354500 ) ) ; +#9600 = CARTESIAN_POINT ( 'NONE', ( 6.331815944518391200, -30.40622592147669700, 25.74987519184482600 ) ) ; +#9601 = CARTESIAN_POINT ( 'NONE', ( 34.90452065898689000, -18.58873236976559400, -20.86283831357675200 ) ) ; +#9602 = CYLINDRICAL_SURFACE ( 'NONE', #2532, 1.200000000000006600 ) ; +#9603 = CARTESIAN_POINT ( 'NONE', ( 38.95272960919011500, -11.88777809891961300, 12.46877631458507800 ) ) ; +#9604 = CARTESIAN_POINT ( 'NONE', ( 15.71121399490451200, -17.93045765425106100, 23.60164634618962200 ) ) ; +#9605 = CARTESIAN_POINT ( 'NONE', ( 13.78443289998421800, -24.15751533336136700, 19.42820202161832900 ) ) ; +#9606 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9607 = EDGE_LOOP ( 'NONE', ( #5857, #6772, #2866, #5818 ) ) ; +#9608 = AXIS2_PLACEMENT_3D ( 'NONE', #10772, #4039, #11881 ) ; +#9609 = CARTESIAN_POINT ( 'NONE', ( 2.931283510917847700, -20.09915066939780500, -15.21603047824226000 ) ) ; +#9610 = CARTESIAN_POINT ( 'NONE', ( 2.366232314032568500, -10.00000000000183300, 16.97900597036541000 ) ) ; +#9611 = CARTESIAN_POINT ( 'NONE', ( 30.76894440602868400, -30.57374419742507500, 27.25571409808188200 ) ) ; +#9612 = CARTESIAN_POINT ( 'NONE', ( 3.864073895873343400, -28.87841101879027400, 22.48730482327282200 ) ) ; +#9613 = CARTESIAN_POINT ( 'NONE', ( 8.077828863349886000, -30.15748921075442400, 26.71471761563432100 ) ) ; +#9614 = CARTESIAN_POINT ( 'NONE', ( 36.54129440787908600, -29.17710253814567900, 22.58198415323561600 ) ) ; +#9615 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3465, #2698, #10527 ), + ( #3811, #11652, #4911 ), + ( #12754, #6047, #13856 ), + ( #7172, #555, #8330 ), + ( #1648, #9442, #2743 ), + ( #10580, #3857, #11698 ), + ( #4963, #12802, #6091 ), + ( #13899, #7221, #595 ), + ( #8375, #1694, #9496 ), + ( #2789, #10630, #3908 ), + ( #11745, #5010, #12857 ), + ( #6140, #13950, #7269 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 9.506284648352902900E-015, 0.003266684851040161700, 0.006533369702070817100, 0.008166712127586146100, 0.009800054553101473400, 0.01306673940413212800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4973876566414013300, 1.000000000000000000), + ( 1.000000000000000000, 0.4966505654475551500, 1.000000000000000000), + ( 1.000000000000000000, 0.4960462789367617300, 1.000000000000000000), + ( 1.000000000000000000, 0.4949960241964655400, 1.000000000000000000), + ( 1.000000000000000000, 0.4945431919339687800, 1.000000000000000000), + ( 1.000000000000000000, 0.4940183942638894900, 1.000000000000000000), + ( 1.000000000000000000, 0.4938651039421439500, 1.000000000000000000), + ( 1.000000000000000000, 0.4936052424111271900, 1.000000000000000000), + ( 1.000000000000000000, 0.4934795259959106600, 1.000000000000000000), + ( 1.000000000000000000, 0.4931922496099576700, 1.000000000000000000), + ( 1.000000000000000000, 0.4931330375857178600, 1.000000000000000000), + ( 1.000000000000000000, 0.4931454283001427400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#9616 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -96.75656818788910100, 6.749276979338880300 ) ) ; +#9617 = EDGE_CURVE ( 'NONE', #9514, #3032, #5663, .T. ) ; +#9618 = CARTESIAN_POINT ( 'NONE', ( 4.404014462478815300, -29.96118159339468400, 24.29358558121579400 ) ) ; +#9619 = CARTESIAN_POINT ( 'NONE', ( 8.387339801008392800, -37.74862711309137400, 16.98544764958505800 ) ) ; +#9620 = CARTESIAN_POINT ( 'NONE', ( 34.76243725607086100, -95.07596123493894400, 11.74817948057317600 ) ) ; +#9621 = CARTESIAN_POINT ( 'NONE', ( -4.336808689942017700E-016, -9.939920676128773300, 10.34594914307589700 ) ) ; +#9622 = VERTEX_POINT ( 'NONE', #13021 ) ; +#9623 = CARTESIAN_POINT ( 'NONE', ( 24.15800171406233300, -22.03500000000001400, 20.29385714440527600 ) ) ; +#9624 = CARTESIAN_POINT ( 'NONE', ( 29.24784918985744000, -30.84832031472744500, 27.77585377299745800 ) ) ; +#9625 = CARTESIAN_POINT ( 'NONE', ( 32.47736009075949700, -99.99999999999998600, 19.74819618678316100 ) ) ; +#9626 = CARTESIAN_POINT ( 'NONE', ( 2.015497905913271400, -11.89736398432701000, -18.74592009292127400 ) ) ; +#9627 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -30.66316004106086600, 28.85652737806401900 ) ) ; +#9628 = CARTESIAN_POINT ( 'NONE', ( 36.36005599940648400, -30.63524535143427800, 21.81126077228227400 ) ) ; +#9629 = CARTESIAN_POINT ( 'NONE', ( 2.500000264755485500, -29.65238133697567200, 21.61928388135643400 ) ) ; +#9630 = CARTESIAN_POINT ( 'NONE', ( 5.313280731601868600, -100.0000000000000300, -28.50008026614133500 ) ) ; +#9631 = VERTEX_POINT ( 'NONE', #8594 ) ; +#9632 = CARTESIAN_POINT ( 'NONE', ( 24.93626212648543500, -12.50000000000001200, 8.143019995482744000 ) ) ; +#9633 = CARTESIAN_POINT ( 'NONE', ( 32.73354797923560300, -30.43248873474894000, 26.32423643955523200 ) ) ; +#9634 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, 3.189999999999994200 ) ) ; +#9635 = CARTESIAN_POINT ( 'NONE', ( 30.11204552222322300, -10.80904320814449600, -24.99999999999999600 ) ) ; +#9636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#9637 = CARTESIAN_POINT ( 'NONE', ( 16.68564801678806800, -12.49999999999999800, -14.40967661532256700 ) ) ; +#9638 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13831, #1387, #12726, #533, #8303, #1622, #9419, #2723, #10551, #3830 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002284776645091084800, 0.004569553290182169600, 0.006854329935273254000, 0.009139106580364339200 ), + .UNSPECIFIED. ) ; +#9639 = VERTEX_POINT ( 'NONE', #10799 ) ; +#9640 = CARTESIAN_POINT ( 'NONE', ( 6.316375862489756800, -7.656603847411848700, 25.00000000000000400 ) ) ; +#9641 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 10.00000000000000000, -24.99999999999999600 ) ) ; +#9642 = CARTESIAN_POINT ( 'NONE', ( 11.41135563629174900, -11.00139960313399200, 24.59149626646080500 ) ) ; +#9643 = CARTESIAN_POINT ( 'NONE', ( 23.77292304446492500, -19.69368013327261800, 23.23579968395709000 ) ) ; +#9644 = ORIENTED_EDGE ( 'NONE', *, *, #11373, .T. ) ; +#9645 = CARTESIAN_POINT ( 'NONE', ( 17.04307327439482800, -12.50000000000002300, 10.09831353940704400 ) ) ; +#9646 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -96.75656818764731800, 6.749276979381341400 ) ) ; +#9647 = CARTESIAN_POINT ( 'NONE', ( 35.15039562463993400, -10.01030339717065100, 22.66968200243133700 ) ) ; +#9648 = CARTESIAN_POINT ( 'NONE', ( 10.24067790921112900, -30.91156775039043600, 27.58658808050129400 ) ) ; +#9649 = CARTESIAN_POINT ( 'NONE', ( 35.42777658209077900, -30.38259110273671500, 24.41742107412271800 ) ) ; +#9650 = CARTESIAN_POINT ( 'NONE', ( 8.133515000909953900, -12.50000000000279100, 17.87069407159640400 ) ) ; +#9651 = CARTESIAN_POINT ( 'NONE', ( 9.992006631100359500, -19.13900972450380800, 21.41066822446589100 ) ) ; +#9652 = ORIENTED_EDGE ( 'NONE', *, *, #11774, .F. ) ; +#9653 = CARTESIAN_POINT ( 'NONE', ( 2.198398347737488200, -18.79481032003064900, 7.957212322301796100 ) ) ; +#9654 = CARTESIAN_POINT ( 'NONE', ( 38.38451032278199200, -11.88566704292875400, 14.28669149741174700 ) ) ; +#9655 = CARTESIAN_POINT ( 'NONE', ( 6.497339030735238600, -29.63016783500512500, 25.64877252889547100 ) ) ; +#9656 = CARTESIAN_POINT ( 'NONE', ( 3.358525124105645100, -7.500000000000004400, 24.72287626683228000 ) ) ; +#9657 = CARTESIAN_POINT ( 'NONE', ( 37.63374628710126800, -10.00000000000366100, 16.97904450055189300 ) ) ; +#9658 = AXIS2_PLACEMENT_3D ( 'NONE', #2735, #1635, #10565 ) ; +#9659 = CARTESIAN_POINT ( 'NONE', ( 37.79875055962731500, -18.80499776149059300, -11.53187062879839800 ) ) ; +#9660 = CARTESIAN_POINT ( 'NONE', ( 13.39382273289457500, -12.50000000000001600, 21.36784869415775700 ) ) ; +#9661 = CARTESIAN_POINT ( 'NONE', ( 37.43339606638403400, -11.97744115360425900, -19.83537533585397100 ) ) ; +#9662 = EDGE_LOOP ( 'NONE', ( #13515, #2358, #5923, #7800, #5240 ) ) ; +#9663 = CARTESIAN_POINT ( 'NONE', ( 3.765481858768697800, -18.64151686747826600, -18.66767945513407100 ) ) ; +#9664 = CARTESIAN_POINT ( 'NONE', ( 5.961036502901990300, -11.87969488324072400, 20.72158547237433600 ) ) ; +#9665 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9666 = CARTESIAN_POINT ( 'NONE', ( 30.76493241741290100, -30.90712263237057700, 27.18754830771886300 ) ) ; +#9667 = CARTESIAN_POINT ( 'NONE', ( 6.090823439538541900, -26.35322856802280000, 16.90995161035007000 ) ) ; +#9668 = CARTESIAN_POINT ( 'NONE', ( 8.353501407644236200, -30.93677999549958500, 26.75756451318076400 ) ) ; +#9669 = CARTESIAN_POINT ( 'NONE', ( 36.81348860909268000, -30.34750590688829400, 22.37281253750479900 ) ) ; +#9670 = ORIENTED_EDGE ( 'NONE', *, *, #8459, .T. ) ; +#9671 = EDGE_CURVE ( 'NONE', #9327, #3483, #6576, .T. ) ; +#9672 = CARTESIAN_POINT ( 'NONE', ( 3.511892742092523900, -93.66222730502936100, 4.589318382290930000 ) ) ; +#9673 = CARTESIAN_POINT ( 'NONE', ( 4.849163864394887100, -31.02941264949182500, 23.75012494159925700 ) ) ; +#9674 = CARTESIAN_POINT ( 'NONE', ( 7.157464228197794000, -31.32681011594247500, 17.15043672228864600 ) ) ; +#9675 = CARTESIAN_POINT ( 'NONE', ( 26.14648689827993900, -95.07596123494806800, 9.573790652946042800 ) ) ; +#9676 = CARTESIAN_POINT ( 'NONE', ( 1.485145742627526300, -10.27217583578384100, 16.99025458056397800 ) ) ; +#9677 = ORIENTED_EDGE ( 'NONE', *, *, #13748, .F. ) ; +#9678 = CYLINDRICAL_SURFACE ( 'NONE', #14038, 3.189999999999995100 ) ; +#9679 = CARTESIAN_POINT ( 'NONE', ( 29.14558216308392600, -30.75492987094813200, 27.82500174854418200 ) ) ; +#9680 = CARTESIAN_POINT ( 'NONE', ( 37.79839571336987100, -18.80694826461783400, -11.70378783570191300 ) ) ; +#9681 = CARTESIAN_POINT ( 'NONE', ( 4.904162961312939800, -16.55998731847705200, -21.43378696645988100 ) ) ; +#9682 = ADVANCED_FACE ( 'NONE', ( #6020 ), #5302, .F. ) ; +#9683 = CARTESIAN_POINT ( 'NONE', ( 39.53183348738652800, -11.87266605045386900, 8.047196510655847800 ) ) ; +#9684 = AXIS2_PLACEMENT_3D ( 'NONE', #9430, #2734, #10564 ) ; +#9685 = CARTESIAN_POINT ( 'NONE', ( 35.96880178331255000, -30.82243460305704700, 22.61274919356922600 ) ) ; +#9686 = CARTESIAN_POINT ( 'NONE', ( 3.548813331362159000, -28.87109216785620100, 21.75704669527090800 ) ) ; +#9687 = CARTESIAN_POINT ( 'NONE', ( 7.537574157781112800, -20.28809933266904900, -19.28355769743977900 ) ) ; +#9688 = CARTESIAN_POINT ( 'NONE', ( 34.98159423394875500, -22.60952808418190300, 8.352714412522996000 ) ) ; +#9689 = ORIENTED_EDGE ( 'NONE', *, *, #11395, .T. ) ; +#9690 = CARTESIAN_POINT ( 'NONE', ( 32.65097925893936500, -31.11127449962516800, 26.06722619776893200 ) ) ; +#9691 = CARTESIAN_POINT ( 'NONE', ( 30.16907180329124900, -12.37602426267274300, -25.07890533137793900 ) ) ; +#9692 = CARTESIAN_POINT ( 'NONE', ( 5.962951608943500400, -9.659918111394770100, 25.00000000000000400 ) ) ; +#9693 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9694 = CARTESIAN_POINT ( 'NONE', ( 12.41250295889036600, -20.91436994971321900, -23.32417949545358800 ) ) ; +#9695 = LINE ( 'NONE', #9464, #9170 ) ; +#9696 = ORIENTED_EDGE ( 'NONE', *, *, #4056, .T. ) ; +#9697 = EDGE_CURVE ( 'NONE', #1086, #12235, #1421, .T. ) ; +#9698 = LINE ( 'NONE', #990, #636 ) ; +#9699 = CARTESIAN_POINT ( 'NONE', ( 13.48694190844632100, -12.33033070977421500, 24.58909982189331000 ) ) ; +#9700 = CARTESIAN_POINT ( 'NONE', ( 16.18313378033969100, -95.07596123493894400, 15.95758058754439400 ) ) ; +#9701 = CARTESIAN_POINT ( 'NONE', ( 22.26115338851605700, -19.43726997333304100, 23.34430374228343700 ) ) ; +#9702 = CARTESIAN_POINT ( 'NONE', ( 16.66118007978795000, -24.23361333402216600, 19.96927802837252100 ) ) ; +#9703 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999993300, -90.29970989197755700, -4.054995618396168000 ) ) ; +#9704 = CARTESIAN_POINT ( 'NONE', ( 17.13652263060687300, -19.58904345028828300, 23.30919292052845300 ) ) ; +#9705 = CARTESIAN_POINT ( 'NONE', ( 10.23990921986915500, -30.74545274309065900, 27.62248617731196300 ) ) ; +#9706 = CARTESIAN_POINT ( 'NONE', ( 34.88768945865155800, -29.26652027515097700, 24.37132128313760800 ) ) ; +#9707 = CARTESIAN_POINT ( 'NONE', ( 15.92978846820202000, -12.50000000000001200, 9.569740250824333200 ) ) ; +#9708 = AXIS2_PLACEMENT_3D ( 'NONE', #13257, #6550, #14348 ) ; +#9709 = CARTESIAN_POINT ( 'NONE', ( 23.29846920210108900, -19.42451948708816900, 23.33251532303030400 ) ) ; +#9710 = VECTOR ( 'NONE', #3685, 1000.000000000000000 ) ; +#9711 = ORIENTED_EDGE ( 'NONE', *, *, #2360, .F. ) ; +#9712 = CARTESIAN_POINT ( 'NONE', ( 2.397751838223178800, -19.58636711116005500, 7.975019766384365400 ) ) ; +#9713 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#9714 = CARTESIAN_POINT ( 'NONE', ( 6.430821079579613000, -30.60852030423340500, 25.76376185301635900 ) ) ; +#9715 = CARTESIAN_POINT ( 'NONE', ( 35.69423502036170200, -10.00000000000000400, 22.49063551393358300 ) ) ; +#9716 = CARTESIAN_POINT ( 'NONE', ( 22.35454854623587600, -32.13578828253771700, 21.09686328653844700 ) ) ; +#9717 = CARTESIAN_POINT ( 'NONE', ( 25.47130695174264800, -30.65936817474672100, 28.70842006012897600 ) ) ; +#9718 = CARTESIAN_POINT ( 'NONE', ( 39.72320034646794800, -11.10719861412818900, 10.24465685863103900 ) ) ; +#9719 = ORIENTED_EDGE ( 'NONE', *, *, #7644, .T. ) ; +#9720 = EDGE_CURVE ( 'NONE', #4574, #4385, #5469, .T. ) ; +#9721 = CARTESIAN_POINT ( 'NONE', ( 6.563864423588760200, -22.08243077996978300, -22.33594724012203500 ) ) ; +#9722 = CARTESIAN_POINT ( 'NONE', ( 8.131394029578185500, -10.00000000000000500, 25.30684631982818900 ) ) ; +#9723 = CARTESIAN_POINT ( 'NONE', ( 30.66171491742939600, -30.45186998766712700, 27.30209958365876900 ) ) ; +#9724 = CARTESIAN_POINT ( 'NONE', ( 3.762808111030528000, -23.03504911753110600, 13.64230238795588900 ) ) ; +#9725 = CARTESIAN_POINT ( 'NONE', ( 8.343678565470108700, -30.43811615873664400, 26.86620407247585300 ) ) ; +#9726 = CARTESIAN_POINT ( 'NONE', ( 36.07220390418648000, -29.00560286476337900, 22.80549776671318100 ) ) ; +#9727 = LINE ( 'NONE', #5354, #463 ) ; +#9728 = ORIENTED_EDGE ( 'NONE', *, *, #4284, .T. ) ; +#9729 = CARTESIAN_POINT ( 'NONE', ( 2.500000000004511900, -90.82477459658836900, -3.049166625068384700 ) ) ; +#9730 = CARTESIAN_POINT ( 'NONE', ( 4.393030817581259100, -30.23052291197820200, 24.29425267790235000 ) ) ; +#9731 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7733, #8874, #2174, #9993, #3281, #11128 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( -0.0003179022947939865400, 0.0009039037865198224200, 0.002125709867833631300 ), + .UNSPECIFIED. ) ; +#9732 = CARTESIAN_POINT ( 'NONE', ( 2.748481179215216800, -29.45032187791261800, 17.69785893836020600 ) ) ; +#9733 = ORIENTED_EDGE ( 'NONE', *, *, #3095, .T. ) ; +#9734 = CARTESIAN_POINT ( 'NONE', ( 9.518533830350371300, -11.44107644259301900, -25.00000000000000400 ) ) ; +#9735 = CARTESIAN_POINT ( 'NONE', ( 29.14470402807861800, -30.81743594022619000, 27.81493315497004900 ) ) ; +#9736 = CARTESIAN_POINT ( 'NONE', ( 37.11712442757055200, -21.51627761545790600, -15.25440560678252500 ) ) ; +#9737 = CARTESIAN_POINT ( 'NONE', ( 22.55762127725338900, -27.96664356551895700, 27.45669629599068900 ) ) ; +#9738 = CARTESIAN_POINT ( 'NONE', ( 11.23942079380887500, -97.40634803306923600, 21.37496054325770300 ) ) ; +#9739 = CARTESIAN_POINT ( 'NONE', ( 35.21014511909671500, -31.01962285506342500, 23.67617787248881100 ) ) ; +#9740 = CARTESIAN_POINT ( 'NONE', ( 2.602986162629374400, -29.99261134522506500, 21.62772062364565400 ) ) ; +#9741 = LINE ( 'NONE', #4839, #9710 ) ; +#9742 = CARTESIAN_POINT ( 'NONE', ( 11.19575091714327200, -100.0000000000000300, -36.63958563575384600 ) ) ; +#9743 = CARTESIAN_POINT ( 'NONE', ( 17.68719255689186200, -31.29913968154958300, 28.74438700826458900 ) ) ; +#9744 = EDGE_CURVE ( 'NONE', #13132, #12598, #13307, .T. ) ; +#9745 = CARTESIAN_POINT ( 'NONE', ( 32.51347403365604500, -30.20383178793537100, 26.42349246515070100 ) ) ; +#9746 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#9747 = CARTESIAN_POINT ( 'NONE', ( 10.12907039772534500, -8.814048761883556800, 25.00000000000000000 ) ) ; +#9748 = CARTESIAN_POINT ( 'NONE', ( 19.16666666666665400, -39.55229479934740100, 19.78913308502480100 ) ) ; +#9749 = CARTESIAN_POINT ( 'NONE', ( 12.32966632347943800, -12.49999999999985300, -21.82253243010824700 ) ) ; +#9750 = CARTESIAN_POINT ( 'NONE', ( 2.540435684690155700, -95.07596123493894400, -3.476174004076951500 ) ) ; +#9751 = ORIENTED_EDGE ( 'NONE', *, *, #2979, .F. ) ; +#9752 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10466, #9345, #11550, #3756, #11596, #4860, #12699, #5995, #13798, #7119, #507, #8269, #1594, #9391, #2688, #10517, #3802, #11642, #4900, #12743, #6040, #13847, #7163, #548, #8321, #1638, #9433, #2737, #10571, #3847, #11689, #4953, #12791, #6080, #13891, #7211, #587, #8364, #1686, #9483, #2781, #10622, #3900, #11736, #5000, #12847, #6130, #13939, #7260, #638, #8412, #1730, #9539, #2823, #10666, #3950, #11784, #5052, #12892, #6181, #13987, #7309, #683, #8462, #1778, #9583, #2879, #10716, #3992, #11831 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 1, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, 1, 2, 2, 2, 2, 2, 1, 1, 1, 1, 2, 2, 2, 2, 1, 1, 1, 2, 2, 2, 1, 1, 1, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.06249999999996820600, 0.09374999999995291300, 0.1093749999999449600, 0.1171874999999410200, 0.1249999999999371100, 0.1874999999999098200, 0.2187499999998968300, 0.2343749999998899800, 0.2421874999998863400, 0.2460937499998849500, 0.2480468749998836500, 0.2499999999998823200, 0.3749999999998643900, 0.4374999999998556200, 0.4687499999998520100, 0.4843749999998505600, 0.4921874999998508400, 0.4960937499998512900, 0.4999999999998517900, 0.6249999999998343500, 0.6874999999998263600, 0.7187499999998228100, 0.7343749999998202500, 0.7421874999998203700, 0.7460937499998195900, 0.7480468749998195900, 0.7490234374998197000, 0.7499999999998197000, 0.8124999999998813200, 0.8437499999999122900, 0.8593749999999271700, 0.8671874999999352700, 0.8710937499999381600, 0.8730468749999394900, 0.8749999999999408300, 0.9062499999999547000, 0.9218749999999615900, 0.9296874999999644700, 0.9335937499999664700, 0.9355468749999680300, 0.9365234374999683600, 0.9374999999999685800, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#9753 = CARTESIAN_POINT ( 'NONE', ( 14.64084431970395200, -16.92702204015984400, 23.72983333159943000 ) ) ; +#9754 = CARTESIAN_POINT ( 'NONE', ( 20.78286937980271900, -33.21268289842944900, 28.40697771037714100 ) ) ; +#9755 = CARTESIAN_POINT ( 'NONE', ( 11.23107212557020100, -95.07596123493894400, 8.644340388078795500 ) ) ; +#9756 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000900, 17.50000000000000400 ) ) ; +#9757 = CARTESIAN_POINT ( 'NONE', ( 7.448313577226361600, -14.40795953955067400, -25.77724219669448800 ) ) ; +#9758 = CARTESIAN_POINT ( 'NONE', ( 10.44427334429041000, -30.90293848221204000, 27.66098116475443500 ) ) ; +#9759 = CARTESIAN_POINT ( 'NONE', ( 35.29351494988687000, -30.15073325817149600, 24.60850167243415500 ) ) ; +#9760 = DIRECTION ( 'NONE', ( -0.9997497390652425600, 0.02203108137215736800, 0.003884674060094837800 ) ) ; +#9761 = CARTESIAN_POINT ( 'NONE', ( 13.15273288870218100, -28.08123352512510000, 26.96594673378285400 ) ) ; +#9762 = ADVANCED_FACE ( 'NONE', ( #4952 ), #5450, .T. ) ; +#9763 = ORIENTED_EDGE ( 'NONE', *, *, #8288, .F. ) ; +#9764 = CARTESIAN_POINT ( 'NONE', ( 2.499523747749952100, -20.40155154148942900, 7.975110443065820400 ) ) ; +#9765 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.39527733499616600, -5.641544558944380200 ) ) ; +#9766 = CARTESIAN_POINT ( 'NONE', ( 6.538118178791394000, -29.78440619258453700, 25.75247506573818900 ) ) ; +#9767 = CARTESIAN_POINT ( 'NONE', ( 30.68977334043600200, -11.87801757017984800, 23.18771553946183400 ) ) ; +#9768 = CARTESIAN_POINT ( 'NONE', ( 25.61992271265393800, -31.98974796043853900, 20.80473854313443000 ) ) ; +#9769 = CARTESIAN_POINT ( 'NONE', ( 3.639658604605498800, -28.91087226422049700, 22.11458360585220000 ) ) ; +#9770 = CARTESIAN_POINT ( 'NONE', ( 15.84818654855863700, -99.99999999999995700, 6.546591031478629800 ) ) ; +#9771 = CARTESIAN_POINT ( 'NONE', ( 10.17528835772244200, -20.37712196035046800, -24.90045383155673200 ) ) ; +#9772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -2.980071900088896200E-016 ) ) ; +#9773 = CARTESIAN_POINT ( 'NONE', ( 30.67088999684006400, -30.77135504362340900, 27.26758334662818200 ) ) ; +#9774 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -27.26143816085969400, 7.897726575766834700 ) ) ; +#9775 = CARTESIAN_POINT ( 'NONE', ( 8.467754157845391200, -31.07606968088017000, 26.74569858141346400 ) ) ; +#9776 = CARTESIAN_POINT ( 'NONE', ( 36.90805880681007500, -30.01705318426057500, 22.66936241798994100 ) ) ; +#9777 = AXIS2_PLACEMENT_3D ( 'NONE', #402, #10411, #3649 ) ; +#9778 = CARTESIAN_POINT ( 'NONE', ( -0.07780226992135118300, -12.49878906808788900, -20.00000000000000700 ) ) ; +#9779 = ORIENTED_EDGE ( 'NONE', *, *, #4867, .T. ) ; +#9780 = CARTESIAN_POINT ( 'NONE', ( 4.848107041987990600, -29.20502219020171400, 24.07275495580501400 ) ) ; +#9781 = CARTESIAN_POINT ( 'NONE', ( 23.84061151393619600, -19.82018124302169000, -26.73156290859184700 ) ) ; +#9782 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -24.23648177666926200, 19.98972415240891800 ) ) ; +#9783 = CARTESIAN_POINT ( 'NONE', ( 35.75740142820087200, -18.61972186248942800, -19.57088460967754200 ) ) ; +#9784 = CARTESIAN_POINT ( 'NONE', ( 26.96144007721670400, -13.18053508800458900, 24.34100141150331000 ) ) ; +#9785 = CARTESIAN_POINT ( 'NONE', ( 3.756867239339354300, -100.0000000000000000, 17.91974006491779600 ) ) ; +#9786 = CARTESIAN_POINT ( 'NONE', ( 34.31735878723201700, -31.13322512968430500, 24.64349167803513700 ) ) ; +#9787 = EDGE_CURVE ( 'NONE', #5747, #4385, #5329, .T. ) ; +#9788 = CARTESIAN_POINT ( 'NONE', ( 3.367250609654681300, -28.95607772616562400, 21.81001268267203500 ) ) ; +#9789 = VECTOR ( 'NONE', #652, 1000.000000000000000 ) ; +#9790 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999990100, -20.28809933266904900, -24.31406949255823200 ) ) ; +#9791 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999998900, -97.08344081517952900, 22.14483981135565900 ) ) ; +#9792 = CARTESIAN_POINT ( 'NONE', ( 32.51347037656992700, -30.89375088260372900, 26.30185441040742600 ) ) ; +#9793 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#9794 = EDGE_LOOP ( 'NONE', ( #3170, #5227, #5910, #13976 ) ) ; +#9795 = CARTESIAN_POINT ( 'NONE', ( 0.04795926930071781100, -10.19183707720281400, 11.15872215366244900 ) ) ; +#9796 = CARTESIAN_POINT ( 'NONE', ( 16.31721327572628500, -12.49999999999998600, -14.24303245533757900 ) ) ; +#9797 = AXIS2_PLACEMENT_3D ( 'NONE', #6458, #14259, #7593 ) ; +#9798 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997300, 12.00000000000000000, -19.99999999999999600 ) ) ; +#9799 = CARTESIAN_POINT ( 'NONE', ( 6.148466853317221300, -89.50553548956769100, 5.756509624865014300 ) ) ; +#9800 = LINE ( 'NONE', #1431, #3814 ) ; +#9801 = CARTESIAN_POINT ( 'NONE', ( 12.59644992405261400, -93.16626021956103900, 22.41949856317027900 ) ) ; +#9802 = CARTESIAN_POINT ( 'NONE', ( 11.26204940989021200, -8.884359852125038900, -24.80328254116807300 ) ) ; +#9803 = CARTESIAN_POINT ( 'NONE', ( 10.44477934001469800, -30.79224496616488000, 27.68545617295662700 ) ) ; +#9804 = CARTESIAN_POINT ( 'NONE', ( 34.90447265103091500, -31.05320140328686700, 24.07276202965429600 ) ) ; +#9805 = EDGE_LOOP ( 'NONE', ( #9880, #9978, #1486, #1453, #10048, #10228, #10325, #10338 ) ) ; +#9806 = CARTESIAN_POINT ( 'NONE', ( 2.543751184026436600, -28.37452017564010700, 12.97139639416307200 ) ) ; +#9807 = EDGE_CURVE ( 'NONE', #3054, #3707, #4614, .T. ) ; +#9808 = CARTESIAN_POINT ( 'NONE', ( 11.23374189621126500, -20.99363244103225100, -22.75453179397991100 ) ) ; +#9809 = CARTESIAN_POINT ( 'NONE', ( 2.501725098424358400, -21.21128727724883600, 8.031209159587065800 ) ) ; +#9810 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9811 = CARTESIAN_POINT ( 'NONE', ( 6.670741431390092100, -30.92917693472850300, 25.74304805005381200 ) ) ; +#9812 = CARTESIAN_POINT ( 'NONE', ( 12.08992448545224000, -18.43569465627236800, -26.48744056891910100 ) ) ; +#9813 = CARTESIAN_POINT ( 'NONE', ( 28.05371993616865100, -38.87386673016977300, 18.82874935303439700 ) ) ; +#9814 = CARTESIAN_POINT ( 'NONE', ( 3.953502667884524900, -28.99124851056346600, 22.79811502715871500 ) ) ; +#9815 = CARTESIAN_POINT ( 'NONE', ( 7.536133408201110700, -99.99999999999995700, 1.632021064356455000 ) ) ; +#9816 = AXIS2_PLACEMENT_3D ( 'NONE', #5889, #13704, #7016 ) ; +#9817 = CARTESIAN_POINT ( 'NONE', ( 12.68439064189049100, -18.44924888920526100, -26.52936581004071200 ) ) ; +#9818 = CARTESIAN_POINT ( 'NONE', ( 37.88247429062040800, -11.91741274050320400, -18.95475523009077500 ) ) ; +#9819 = EDGE_LOOP ( 'NONE', ( #14331, #148 ) ) ; +#9820 = CARTESIAN_POINT ( 'NONE', ( 30.36136747435267600, -30.47390449794258800, 27.42193875899250000 ) ) ; +#9821 = CARTESIAN_POINT ( 'NONE', ( 8.435554948487393300, -30.60402016213124200, 26.89792368267007900 ) ) ; +#9822 = CARTESIAN_POINT ( 'NONE', ( 36.04503865121329700, -30.79601235588421600, 22.48837904376698300 ) ) ; +#9823 = EDGE_LOOP ( 'NONE', ( #10591, #9440, #8807 ) ) ; +#9824 = CARTESIAN_POINT ( 'NONE', ( 24.04180570442419900, -12.50000000000002100, -14.00815964415131100 ) ) ; +#9825 = EDGE_CURVE ( 'NONE', #11281, #8131, #3909, .T. ) ; +#9826 = CARTESIAN_POINT ( 'NONE', ( 4.619425066419680100, -30.53103317344201900, 24.34759306833524000 ) ) ; +#9827 = CARTESIAN_POINT ( 'NONE', ( 34.82732601767297400, -95.04805744684981100, 13.79844971299346300 ) ) ; +#9828 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7939, #1276, #9075, #2373, #10201, #3481, #11327, #4597, #12427, #5713, #13529, #6839, #231, #7982, #1320, #9117, #2413, #10243 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 1.453143656731398200E-005, 2.906287313462796400E-005, 5.812574626926079400E-005, 0.0001162514925385282700, 0.0002325029850770632600, 0.0004650059701541283600, 0.0009300119403082534700, 0.001860023880616502000 ), + .UNSPECIFIED. ) ; +#9829 = CARTESIAN_POINT ( 'NONE', ( 33.29696313685997200, -20.29776196396701200, -22.17138829770639000 ) ) ; +#9830 = ADVANCED_FACE ( 'NONE', ( #3023 ), #10513, .F. ) ; +#9831 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457636700, -30.82655086342985500, 27.93782961424069800 ) ) ; +#9832 = ORIENTED_EDGE ( 'NONE', *, *, #11754, .F. ) ; +#9833 = CARTESIAN_POINT ( 'NONE', ( 32.34301305465177000, -31.14196261379522200, 26.23919478483432900 ) ) ; +#9834 = CARTESIAN_POINT ( 'NONE', ( 3.136312873125634700, -30.39019446921748400, 21.62040109450836000 ) ) ; +#9835 = CARTESIAN_POINT ( 'NONE', ( 12.82851474047899700, -11.54987650895988000, 24.72671495470952200 ) ) ; +#9836 = CARTESIAN_POINT ( 'NONE', ( 37.98450209408630900, -11.89736398432789200, -18.74592009292171500 ) ) ; +#9837 = CARTESIAN_POINT ( 'NONE', ( 32.10174487644605500, -30.06073488031667300, 26.60552055185618100 ) ) ; +#9838 = ORIENTED_EDGE ( 'NONE', *, *, #8580, .T. ) ; +#9839 = CARTESIAN_POINT ( 'NONE', ( 4.425119956340315900, -21.84838785995727100, -19.38781692628868600 ) ) ; +#9840 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -10.00000000000000000, 25.00000000000000000 ) ) ; +#9841 = CARTESIAN_POINT ( 'NONE', ( 10.78020937708494200, -21.03687070617285600, -22.45034078812359000 ) ) ; +#9842 = DIRECTION ( 'NONE', ( 0.2855371104760171500, -0.9438078950257474700, -0.1664187964986956500 ) ) ; +#9843 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9844 = ORIENTED_EDGE ( 'NONE', *, *, #6822, .F. ) ; +#9845 = CARTESIAN_POINT ( 'NONE', ( 8.091507564069450700, -97.47405459004009700, 20.40952762262856300 ) ) ; +#9846 = CARTESIAN_POINT ( 'NONE', ( 34.52524706999627600, -94.72219806545337000, 15.44556310733653600 ) ) ; +#9847 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -89.20772034660431900, 11.03354182248334700 ) ) ; +#9848 = CARTESIAN_POINT ( 'NONE', ( 10.44428570680676000, -30.66333771928625800, 27.70348722025333600 ) ) ; +#9849 = CARTESIAN_POINT ( 'NONE', ( 34.88445214493420800, -29.88937986681611400, 24.85313032668505800 ) ) ; +#9850 = EDGE_LOOP ( 'NONE', ( #5284, #3105, #1245, #10889 ) ) ; +#9851 = CARTESIAN_POINT ( 'NONE', ( 3.756867239339289500, -97.42181713028699600, 18.37434326604852300 ) ) ; +#9852 = CARTESIAN_POINT ( 'NONE', ( 5.421347954503899800, -22.05113095159917700, -15.19757521035479500 ) ) ; +#9853 = CIRCLE ( 'NONE', #14179, 3.189999999999995100 ) ; +#9854 = CARTESIAN_POINT ( 'NONE', ( 2.210757553080798100, -18.80662166783939800, 8.470380136484964200 ) ) ; +#9855 = CARTESIAN_POINT ( 'NONE', ( 9.252746092213017800, -94.73587760758712800, 17.26036566048649200 ) ) ; +#9856 = CARTESIAN_POINT ( 'NONE', ( 6.632648703764510300, -30.16434922072804900, 25.93506076794723500 ) ) ; +#9857 = CARTESIAN_POINT ( 'NONE', ( 12.47823376181925200, -20.81188439822810600, -26.17125464479076400 ) ) ; +#9858 = CARTESIAN_POINT ( 'NONE', ( 36.64147487587555900, -7.500000000000000000, 24.72287626683881400 ) ) ; +#9859 = ORIENTED_EDGE ( 'NONE', *, *, #5487, .F. ) ; +#9860 = AXIS2_PLACEMENT_3D ( 'NONE', #3558, #11399, #4668 ) ; +#9861 = CARTESIAN_POINT ( 'NONE', ( 33.61905160417659700, -31.90308803100104400, 24.97660230409270100 ) ) ; +#9862 = CARTESIAN_POINT ( 'NONE', ( 4.765068415553038500, -29.18165192565324900, 23.96936020747367700 ) ) ; +#9863 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9864 = CARTESIAN_POINT ( 'NONE', ( 17.64174931831948400, -22.46239557969522600, -27.19677647530671300 ) ) ; +#9865 = CIRCLE ( 'NONE', #12295, 1.200000000000007500 ) ; +#9866 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9867 = ORIENTED_EDGE ( 'NONE', *, *, #3000, .T. ) ; +#9868 = CARTESIAN_POINT ( 'NONE', ( 30.36972049485216000, -30.72120399250884800, 27.40046718182156100 ) ) ; +#9869 = CIRCLE ( 'NONE', #14114, 3.189999999999994200 ) ; +#9870 = CARTESIAN_POINT ( 'NONE', ( 25.35929828834389000, -100.0000000000000300, -38.03890846183703900 ) ) ; +#9871 = CARTESIAN_POINT ( 'NONE', ( 8.469388153686622900, -30.17182226633759600, 26.90164483262110600 ) ) ; +#9872 = CARTESIAN_POINT ( 'NONE', ( 36.51053226499158200, -29.77364745756211000, 23.19297771964200500 ) ) ; +#9873 = EDGE_CURVE ( 'NONE', #4810, #6338, #4292, .T. ) ; +#9874 = CARTESIAN_POINT ( 'NONE', ( 4.843523612823634700, -29.44784744657233200, 24.33025235581846200 ) ) ; +#9875 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#9876 = LINE ( 'NONE', #13271, #3896 ) ; +#9877 = CARTESIAN_POINT ( 'NONE', ( 29.95444665105315400, -22.30457084002739200, -25.16523257959797600 ) ) ; +#9878 = CARTESIAN_POINT ( 'NONE', ( 37.50000058767494700, -29.65244644284218000, 21.61966353004119100 ) ) ; +#9879 = CARTESIAN_POINT ( 'NONE', ( 19.20122382630096100, -33.90000214907885800, 20.78578478212628500 ) ) ; +#9880 = ORIENTED_EDGE ( 'NONE', *, *, #4322, .F. ) ; +#9881 = CARTESIAN_POINT ( 'NONE', ( 31.16045888665308500, -31.05629197445183800, 26.94232807259182000 ) ) ; +#9882 = CARTESIAN_POINT ( 'NONE', ( 2.829145979543264700, -29.25855884492432700, 21.82010743012368100 ) ) ; +#9883 = VECTOR ( 'NONE', #8449, 1000.000000000000000 ) ; +#9884 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9885 = CARTESIAN_POINT ( 'NONE', ( 32.15212778234716500, -30.68364631681252800, 26.59074226384218100 ) ) ; +#9886 = VERTEX_POINT ( 'NONE', #11940 ) ; +#9887 = CARTESIAN_POINT ( 'NONE', ( 15.49419042114600000, -22.45447542265369000, -27.09376687093134400 ) ) ; +#9888 = PLANE ( 'NONE', #9200 ) ; +#9889 = CARTESIAN_POINT ( 'NONE', ( 11.21895256006736800, -12.49999999999992900, -21.25071504390037800 ) ) ; +#9890 = EDGE_CURVE ( 'NONE', #8795, #4636, #2718, .T. ) ; +#9891 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #12503 ) ; +#9892 = VECTOR ( 'NONE', #4105, 1000.000000000000000 ) ; +#9893 = VERTEX_POINT ( 'NONE', #10836 ) ; +#9894 = CARTESIAN_POINT ( 'NONE', ( 7.087068771049993100, -94.72863208202321100, 16.31146166516729000 ) ) ; +#9895 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9896 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#9897 = PLANE ( 'NONE', #4408 ) ; +#9898 = CARTESIAN_POINT ( 'NONE', ( 10.75235866986347200, -30.83003562544295000, 27.77952159205764500 ) ) ; +#9899 = CARTESIAN_POINT ( 'NONE', ( 34.78959458099932100, -30.84311135704750500, 24.58502790422064500 ) ) ; +#9900 = VERTEX_POINT ( 'NONE', #13052 ) ; +#9901 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 8.981438871123701900, -19.99999999999999600 ) ) ; +#9902 = CARTESIAN_POINT ( 'NONE', ( 33.90374861888588500, -30.73466767150117500, 25.45333616894696500 ) ) ; +#9903 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -95.07596123493894400, 22.49881262457338600 ) ) ; +#9904 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9905 = ADVANCED_FACE ( 'NONE', ( #2505 ), #10733, .T. ) ; +#9906 = CARTESIAN_POINT ( 'NONE', ( 2.437617839329635500, -19.57550943387543200, 9.086672020578578900 ) ) ; +#9907 = CARTESIAN_POINT ( 'NONE', ( 6.829605794695365400, -31.15087035737071700, 25.66171755416258200 ) ) ; +#9908 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000016300, -22.46243069294102000, -27.19746277637470300 ) ) ; +#9909 = ORIENTED_EDGE ( 'NONE', *, *, #13306, .T. ) ; +#9910 = CARTESIAN_POINT ( 'NONE', ( 32.16961923493806100, -31.34811569512451600, 17.73981487543514700 ) ) ; +#9911 = CARTESIAN_POINT ( 'NONE', ( 6.572374351996368000, -29.64930957223586800, 25.70581824282155400 ) ) ; +#9912 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.04178190292040562200, 0.9991267550157736400 ) ) ; +#9913 = EDGE_CURVE ( 'NONE', #3931, #11201, #2046, .T. ) ; +#9914 = CARTESIAN_POINT ( 'NONE', ( 22.35960462362701400, -27.96255689439421800, 27.45771657700752400 ) ) ; +#9915 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9928, #10656, #4329, #12164 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001504306358335894300 ), + .UNSPECIFIED. ) ; +#9916 = CARTESIAN_POINT ( 'NONE', ( 37.50046515177940900, -20.40995578876177400, 7.829894859996638700 ) ) ; +#9917 = VERTEX_POINT ( 'NONE', #11993 ) ; +#9918 = CARTESIAN_POINT ( 'NONE', ( 30.36139111379306900, -30.98109454181829400, 27.33257066707073000 ) ) ; +#9919 = CARTESIAN_POINT ( 'NONE', ( 30.15371374435567700, -20.28809933267076800, -21.65708703292724700 ) ) ; +#9920 = CARTESIAN_POINT ( 'NONE', ( 8.633339341374611600, -30.72735286661725200, 26.96813041164946200 ) ) ; +#9921 = CARTESIAN_POINT ( 'NONE', ( 35.89088456195000300, -30.83207500271289800, 22.87217445509903500 ) ) ; +#9922 = LINE ( 'NONE', #12792, #11073 ) ; +#9923 = CARTESIAN_POINT ( 'NONE', ( 4.976268136366107000, -30.90528358941242700, 24.21526216346669000 ) ) ; +#9924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9464700826150233000, 0.3227915468451907400 ) ) ; +#9925 = CARTESIAN_POINT ( 'NONE', ( 26.35082456893382700, -18.44178022569368000, -26.81963883743353300 ) ) ; +#9926 = CARTESIAN_POINT ( 'NONE', ( 32.94203043902076900, -31.94460001862339000, 23.88295365730064600 ) ) ; +#9927 = ORIENTED_EDGE ( 'NONE', *, *, #8507, .T. ) ; +#9928 = CARTESIAN_POINT ( 'NONE', ( 37.81486673790828900, -11.92747418448650300, -19.08876031342177300 ) ) ; +#9929 = CARTESIAN_POINT ( 'NONE', ( 3.572606453997954300, -30.59613425184484100, 21.70224657468399000 ) ) ; +#9930 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #13771, #9365, #3822, #11664 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.5000000620918260100, 1.000000000000000000 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9899187046567947700, 0.9899187046567947700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#9931 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -94.74682992296695300, 18.71443453778783800 ) ) ; +#9932 = CARTESIAN_POINT ( 'NONE', ( 31.90831775522817200, -30.06922808721964900, 26.70343152269095600 ) ) ; +#9933 = CARTESIAN_POINT ( 'NONE', ( 29.75169750625182300, -11.15030862157544600, -25.04838199012307600 ) ) ; +#9934 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#9935 = CARTESIAN_POINT ( 'NONE', ( 15.96305884022150500, -12.49999999999997900, -14.00707544920210200 ) ) ; +#9936 = CARTESIAN_POINT ( 'NONE', ( 17.43873147890898100, -19.88640213962530700, 23.25679227354088100 ) ) ; +#9937 = CARTESIAN_POINT ( 'NONE', ( 10.75199654705502700, -30.75070618527481200, 27.79298182894264400 ) ) ; +#9938 = CARTESIAN_POINT ( 'NONE', ( 34.53899467375888600, -29.52176027341463900, 24.87305349297665900 ) ) ; +#9939 = CARTESIAN_POINT ( 'NONE', ( 22.79048484766372000, -12.50000000000002000, 10.12469474767827500 ) ) ; +#9940 = CARTESIAN_POINT ( 'NONE', ( 33.67561687707977600, -29.60661528870338800, 25.52431818639461300 ) ) ; +#9941 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 16.30000000000000100 ) ) ; +#9942 = CARTESIAN_POINT ( 'NONE', ( 2.673840910869430800, -20.29273555113050900, 10.32238867038662100 ) ) ; +#9943 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000002800, -7.511547099453296500, 19.99999999999997200 ) ) ; +#9944 = CARTESIAN_POINT ( 'NONE', ( 6.697777211906142700, -30.41995731111509500, 25.99074115688906500 ) ) ; +#9945 = CARTESIAN_POINT ( 'NONE', ( 16.70151974059395200, -19.42451235675778800, 23.33251629878559500 ) ) ; +#9946 = CARTESIAN_POINT ( 'NONE', ( 35.01553127427448000, -35.20455389413276500, 13.73440247329338400 ) ) ; +#9947 = EDGE_CURVE ( 'NONE', #3483, #11717, #5488, .T. ) ; +#9948 = LOCAL_TIME ( 15, 9, 47.00000000000000000, #5186 ) ; +#9949 = CARTESIAN_POINT ( 'NONE', ( 8.811338900088015800, -30.26280814823232700, 27.06777368707289000 ) ) ; +#9950 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#9951 = ORIENTED_EDGE ( 'NONE', *, *, #4787, .F. ) ; +#9952 = CARTESIAN_POINT ( 'NONE', ( 39.68124979522152500, -11.29612735891382700, 9.666887739114297800 ) ) ; +#9953 = CARTESIAN_POINT ( 'NONE', ( 37.60238945822983700, -19.58747919379208500, 7.912294382300146400 ) ) ; +#9954 = CARTESIAN_POINT ( 'NONE', ( 30.16636934232839500, -30.67444368724867600, 27.48472338521483800 ) ) ; +#9955 = CARTESIAN_POINT ( 'NONE', ( 33.35350530012105000, -100.0000000000000300, -31.96713653986546400 ) ) ; +#9956 = CARTESIAN_POINT ( 'NONE', ( 8.657149795242201400, -30.25447451380767900, 26.99897543379563200 ) ) ; +#9957 = CARTESIAN_POINT ( 'NONE', ( 36.07041354673715700, -29.41472244976506500, 23.42591697125315500 ) ) ; +#9958 = FACE_OUTER_BOUND ( 'NONE', #4194, .T. ) ; +#9959 = CARTESIAN_POINT ( 'NONE', ( 4.765022070175715100, -29.90510572492711500, 24.59614841696844700 ) ) ; +#9960 = CARTESIAN_POINT ( 'NONE', ( 24.00531620446996000, -27.99878938728866000, 27.44663080084465500 ) ) ; +#9961 = ORIENTED_EDGE ( 'NONE', *, *, #8935, .T. ) ; +#9962 = CARTESIAN_POINT ( 'NONE', ( 22.36108331640728900, -20.43405110636784600, -26.83915180110788500 ) ) ; +#9963 = ADVANCED_FACE ( 'NONE', ( #3084 ), #10567, .T. ) ; +#9964 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -94.74682992296695300, 18.71443453778785600 ) ) ; +#9965 = EDGE_CURVE ( 'NONE', #1097, #12451, #1877, .T. ) ; +#9966 = CARTESIAN_POINT ( 'NONE', ( 2.552535554537252300, -29.63350022720243300, 21.86415546810284700 ) ) ; +#9967 = CARTESIAN_POINT ( 'NONE', ( 25.88507496518371600, -14.24185467757037100, 24.25204657209996700 ) ) ; +#9968 = CARTESIAN_POINT ( 'NONE', ( 31.95754450776676900, -30.56560142884330100, 26.71327109975898800 ) ) ; +#9969 = CARTESIAN_POINT ( 'NONE', ( 40.00000000134355100, -9.999999999958166800, -20.05448249536497200 ) ) ; +#9970 = CARTESIAN_POINT ( 'NONE', ( 28.94022210535093400, -30.78696414736049300, 27.88358627703382800 ) ) ; +#9971 = CARTESIAN_POINT ( 'NONE', ( 30.47663040432921400, -9.903876952536681000, 23.89694954540584600 ) ) ; +#9972 = CARTESIAN_POINT ( 'NONE', ( 6.261308514144007900, -23.26648639292204400, 13.06443696883853500 ) ) ; +#9973 = CARTESIAN_POINT ( 'NONE', ( 8.684514385954212700, -21.27076684124133300, -20.78256685208453200 ) ) ; +#9974 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999920500, -29.42161177198124400, 21.65997587649239600 ) ) ; +#9975 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#9976 = VERTEX_POINT ( 'NONE', #249 ) ; +#9977 = CARTESIAN_POINT ( 'NONE', ( 37.08866730619048000, -29.82501499981770700, 19.12850485790664100 ) ) ; +#9978 = ORIENTED_EDGE ( 'NONE', *, *, #4500, .F. ) ; +#9979 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999992900, -20.00069905418677200, -11.72603109299557800 ) ) ; +#9980 = CARTESIAN_POINT ( 'NONE', ( 34.75747331619253800, -30.50129033631771600, 24.94100643632057100 ) ) ; +#9981 = CARTESIAN_POINT ( 'NONE', ( 24.90072949429305300, -24.20400289088443200, 19.75884901717170900 ) ) ; +#9982 = EDGE_CURVE ( 'NONE', #11201, #9994, #2846, .T. ) ; +#9983 = CARTESIAN_POINT ( 'NONE', ( 33.84874551842320800, -30.48739376586043500, 25.60870864435104700 ) ) ; +#9984 = CARTESIAN_POINT ( 'NONE', ( 35.14083664693295400, -9.852061065451037400, 25.00000000000000400 ) ) ; +#9985 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -22.50000000000000400, -14.54982113999828500 ) ) ; +#9986 = VERTEX_POINT ( 'NONE', #8001 ) ; +#9987 = CARTESIAN_POINT ( 'NONE', ( 3.002765465645040900, -20.90228704890745300, 11.78865808146991300 ) ) ; +#9988 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 17.50000000000000400 ) ) ; +#9989 = CARTESIAN_POINT ( 'NONE', ( 6.836164931819484800, -29.72170136705638700, 25.90377069956024800 ) ) ; +#9990 = CARTESIAN_POINT ( 'NONE', ( 1.017588320995056100E-013, -10.00000000000000700, -19.07833040940553800 ) ) ; +#9991 = CARTESIAN_POINT ( 'NONE', ( 37.43062310571304600, -28.58846050321397700, 13.95428480444457100 ) ) ; +#9992 = CARTESIAN_POINT ( 'NONE', ( 10.44138342314876200, -30.66161213857790800, 27.70801045561853100 ) ) ; +#9993 = CARTESIAN_POINT ( 'NONE', ( 23.41567084557422600, -19.92294372493797300, 23.22754417869691700 ) ) ; +#9994 = VERTEX_POINT ( 'NONE', #11388 ) ; +#9995 = AXIS2_PLACEMENT_3D ( 'NONE', #11351, #4625, #12454 ) ; +#9996 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -8.285955259014484000, 15.54857149302947400 ) ) ; +#9997 = CARTESIAN_POINT ( 'NONE', ( 37.80150441868403300, -18.79488209937343900, 7.970341431288886700 ) ) ; +#9998 = CARTESIAN_POINT ( 'NONE', ( 30.16376122634124000, -30.91210887431432400, 27.43457094164567800 ) ) ; +#9999 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -20.28809933267076800, -12.41533459290665900 ) ) ; +#10000 = CARTESIAN_POINT ( 'NONE', ( 8.740016217699036400, -30.89344504873110300, 26.96714168670283100 ) ) ; +#10001 = CARTESIAN_POINT ( 'NONE', ( 36.07044723431080500, -30.60978362953192500, 23.21365713522521500 ) ) ; +#10002 = ORIENTED_EDGE ( 'NONE', *, *, #2664, .F. ) ; +#10003 = EDGE_CURVE ( 'NONE', #13647, #10735, #12240, .T. ) ; +#10004 = CARTESIAN_POINT ( 'NONE', ( 26.00066813880626200, -20.01385634412526200, 22.81368892163734000 ) ) ; +#10005 = CARTESIAN_POINT ( 'NONE', ( 5.385137259836936300, -31.10469146360399500, 24.35069907899053400 ) ) ; +#10006 = VERTEX_POINT ( 'NONE', #6906 ) ; +#10007 = CARTESIAN_POINT ( 'NONE', ( 12.32664160461875200, -11.65527856073001600, -25.29187027084494200 ) ) ; +#10008 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, 51.02052347080197600, 33.25956466485612100 ) ) ; +#10009 = CARTESIAN_POINT ( 'NONE', ( 3.603873844952960100, -28.89826265021556800, 22.00196619390128600 ) ) ; +#10010 = CARTESIAN_POINT ( 'NONE', ( 23.36324969983511900, -22.18012311737612700, -27.12956872518661900 ) ) ; +#10011 = ORIENTED_EDGE ( 'NONE', *, *, #3962, .F. ) ; +#10012 = CARTESIAN_POINT ( 'NONE', ( 31.91068266454150000, -31.10292152190644200, 26.52584807805898100 ) ) ; +#10013 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.04531648070944500, 16.23785755017209500 ) ) ; +#10014 = CARTESIAN_POINT ( 'NONE', ( 28.93939742304210200, -30.81496662248758200, 27.87908770884919800 ) ) ; +#10015 = CARTESIAN_POINT ( 'NONE', ( 22.32590020931205600, -9.999999999999998200, 25.81642715810076900 ) ) ; +#10016 = CARTESIAN_POINT ( 'NONE', ( 16.67286474801705500, -24.23648177666927200, 19.98972415240891500 ) ) ; +#10017 = CARTESIAN_POINT ( 'NONE', ( 8.372886611121071400, -12.49999999999957400, -19.00145675289639900 ) ) ; +#10018 = CARTESIAN_POINT ( 'NONE', ( 2.100349466451191900E-014, -10.00000000000000200, -19.82850493061590700 ) ) ; +#10019 = EDGE_LOOP ( 'NONE', ( #1733, #9448, #10142, #4960 ) ) ; +#10020 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, -11.53324907984514000 ) ) ; +#10021 = CIRCLE ( 'NONE', #14263, 1.200000000000006600 ) ; +#10022 = CARTESIAN_POINT ( 'NONE', ( 4.026752628173053200, -30.77792386537490900, 22.90163973776971700 ) ) ; +#10023 = CARTESIAN_POINT ( 'NONE', ( 37.49961930248679900, -27.21823579072850000, 7.375970588031591100 ) ) ; +#10024 = ORIENTED_EDGE ( 'NONE', *, *, #7232, .F. ) ; +#10025 = CARTESIAN_POINT ( 'NONE', ( 0.03058250473217260700, -10.11470315035257000, -11.83656268837791200 ) ) ; +#10026 = CARTESIAN_POINT ( 'NONE', ( 34.15184949145710600, -29.45611477855220500, 25.10376647203648300 ) ) ; +#10027 = CARTESIAN_POINT ( 'NONE', ( 27.27273506204782900, -12.50000000000055600, 21.11789783470886700 ) ) ; +#10028 = CARTESIAN_POINT ( 'NONE', ( 33.66721255233790100, -31.16589494027613900, 25.23764604179066100 ) ) ; +#10029 = CARTESIAN_POINT ( 'NONE', ( 15.12514211562921900, -12.49999999999996600, -12.79444441149702200 ) ) ; +#10030 = ADVANCED_FACE ( 'NONE', ( #1324 ), #5832, .F. ) ; +#10031 = ORIENTED_EDGE ( 'NONE', *, *, #6090, .F. ) ; +#10032 = CARTESIAN_POINT ( 'NONE', ( 3.393388873016213800, -18.93900624318764500, 13.85572378072910700 ) ) ; +#10033 = CARTESIAN_POINT ( 'NONE', ( 5.455032871510727700, -95.07596123493895800, 13.25338931282099300 ) ) ; +#10034 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999995700, -12.50000000000000700, -11.97268808056955600 ) ) ; +#10035 = FACE_OUTER_BOUND ( 'NONE', #12854, .T. ) ; +#10036 = CARTESIAN_POINT ( 'NONE', ( 6.887279817609664800, -30.61652581343355500, 26.06819654117125000 ) ) ; +#10037 = CARTESIAN_POINT ( 'NONE', ( 0.2588865223347912000, -10.43389580700350400, -14.17614825887297400 ) ) ; +#10038 = CARTESIAN_POINT ( 'NONE', ( 37.37576543231715200, -28.30733713579977400, 8.832979447472341800 ) ) ; +#10039 = CARTESIAN_POINT ( 'NONE', ( 25.75833234292393600, -100.0000000000000100, -37.93648162946808400 ) ) ; +#10040 = ORIENTED_EDGE ( 'NONE', *, *, #7019, .T. ) ; +#10041 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.878887755046969600, 20.09899844734913500 ) ) ; +#10042 = CARTESIAN_POINT ( 'NONE', ( 37.49912488728316600, -21.21748276517611100, 7.955182065322079100 ) ) ; +#10043 = CARTESIAN_POINT ( 'NONE', ( 29.75936292928229300, -30.65086950880120000, 27.63472431467221600 ) ) ; +#10044 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 9.934684141622256000 ) ) ; +#10045 = CARTESIAN_POINT ( 'NONE', ( 8.740016037708406000, -30.43171777523719600, 27.04856078251517500 ) ) ; +#10046 = CARTESIAN_POINT ( 'NONE', ( 35.57514433028823200, -29.17219999623709400, 23.63506080255868000 ) ) ; +#10047 = FACE_OUTER_BOUND ( 'NONE', #12960, .T. ) ; +#10048 = ORIENTED_EDGE ( 'NONE', *, *, #4174, .F. ) ; +#10049 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -14.31000000000000400 ) ) ; +#10050 = EDGE_CURVE ( 'NONE', #10735, #9349, #1339, .T. ) ; +#10051 = ADVANCED_FACE ( 'NONE', ( #646 ), #614, .F. ) ; +#10052 = CARTESIAN_POINT ( 'NONE', ( 34.35887340129449500, -21.42469525522097800, 17.12041732863682600 ) ) ; +#10053 = CARTESIAN_POINT ( 'NONE', ( 5.035837516938054000, -30.24269860951693900, 24.87101691738404700 ) ) ; +#10054 = CARTESIAN_POINT ( 'NONE', ( 0.4543582795747129200, -10.00000000000000000, -21.08086465129407100 ) ) ; +#10055 = EDGE_LOOP ( 'NONE', ( #13432, #118, #778, #5946 ) ) ; +#10056 = CARTESIAN_POINT ( 'NONE', ( 24.72033945146123200, -95.07596123493895800, 16.84439144973503100 ) ) ; +#10057 = CARTESIAN_POINT ( 'NONE', ( 5.489292489312935800, -31.43467063061702000, 22.93440393206227800 ) ) ; +#10058 = AXIS2_PLACEMENT_3D ( 'NONE', #10133, #3419, #11261 ) ; +#10059 = CARTESIAN_POINT ( 'NONE', ( 37.88247429062038700, -11.91741274050323400, -18.95475523009079700 ) ) ; +#10060 = CARTESIAN_POINT ( 'NONE', ( 2.625184032292804800, -29.98763360428846200, 21.85579760909745400 ) ) ; +#10061 = LINE ( 'NONE', #13829, #11124 ) ; +#10062 = EDGE_LOOP ( 'NONE', ( #6118, #865, #13801 ) ) ; +#10063 = CARTESIAN_POINT ( 'NONE', ( 35.82073743793770100, -9.999999999999996400, 22.36143813341930600 ) ) ; +#10064 = CARTESIAN_POINT ( 'NONE', ( 31.65594333792396500, -30.43811896266833400, 26.86633853639450500 ) ) ; +#10065 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, -95.07596123493894400, 16.93034213569666900 ) ) ; +#10066 = CARTESIAN_POINT ( 'NONE', ( 28.94021989098882800, -30.84515781050241800, 27.87332639840071700 ) ) ; +#10067 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8120, #13656, #9247, #2547 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#10068 = CARTESIAN_POINT ( 'NONE', ( 36.87520376321374000, -29.06819937069453300, 21.79082143894540000 ) ) ; +#10069 = CARTESIAN_POINT ( 'NONE', ( 39.38320432706400000, -10.00000000000000000, 12.83835384958862500 ) ) ; +#10070 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669238900, 0.9848077530122092400 ) ) ; +#10071 = CARTESIAN_POINT ( 'NONE', ( 15.36736508731127800, -12.49999999999999300, -13.31997578870014300 ) ) ; +#10072 = CARTESIAN_POINT ( 'NONE', ( 17.55170006834909600, -27.96429671943141300, 27.45736486687245700 ) ) ; +#10073 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -7.665925284004584800, 18.27519550790505700 ) ) ; +#10074 = ORIENTED_EDGE ( 'NONE', *, *, #6531, .T. ) ; +#10075 = EDGE_CURVE ( 'NONE', #9994, #1534, #634, .T. ) ; +#10076 = CARTESIAN_POINT ( 'NONE', ( 3.511284795426727000, -29.72542819172154100, 23.19557940259497600 ) ) ; +#10077 = LINE ( 'NONE', #9941, #10382 ) ; +#10078 = CARTESIAN_POINT ( 'NONE', ( 6.488410864766532200, -9.903390357385644500, 21.90239726599046600 ) ) ; +#10079 = CARTESIAN_POINT ( 'NONE', ( 32.52822497021809100, -21.46525710893271800, -19.39341010760201600 ) ) ; +#10080 = CARTESIAN_POINT ( 'NONE', ( 34.40704546955182500, -30.31468088828916800, 25.26128664370828100 ) ) ; +#10081 = AXIS2_PLACEMENT_3D ( 'NONE', #11280, #2324, #5667 ) ; +#10082 = CARTESIAN_POINT ( 'NONE', ( 23.45024593533317200, -12.49999999999998600, 9.948236825514820600 ) ) ; +#10083 = CARTESIAN_POINT ( 'NONE', ( 33.66217366723967800, -30.30656797483926800, 25.75917822818052400 ) ) ; +#10084 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11956, #9716, #5229 ), + ( #13069, #6360, #14168 ), + ( #7498, #859, #8640 ), + ( #1953, #9768, #3061 ), + ( #10904, #4170, #12008 ), + ( #5277, #13121, #6413 ), + ( #14216, #7547, #900 ), + ( #8693, #2000, #9813 ), + ( #3110, #10958, #4220 ), + ( #12054, #5331, #13168 ), + ( #6459, #14260, #7595 ), + ( #947, #8734, #2048 ), + ( #9861, #3152, #11002 ), + ( #4273, #12100, #5372 ), + ( #13212, #6503, #14303 ), + ( #7640, #995, #8781 ), + ( #2085, #9910, #3197 ), + ( #11037, #4313, #12146 ), + ( #5410, #13254, #6548 ), + ( #14346, #7686, #1039 ), + ( #8827, #2126, #9946 ), + ( #3238, #11080, #4355 ), + ( #12188, #5458, #13295 ), + ( #6590, #14389, #7731 ), + ( #1081, #8871, #2172 ), + ( #9991, #3278, #11126 ), + ( #4396, #12229, #5502 ), + ( #13340, #6634, #41 ), + ( #7783, #1129, #8916 ), + ( #2219, #10038, #3324 ), + ( #11174, #4450, #12275 ), + ( #5550, #13381, #6686 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.004636758949342862500, 0.006955138424014293800, 0.008114328161350010300, 0.009273517898685725000, 0.01159189737335715600, 0.01391027684802858800, 0.01622865632270002100, 0.01854703579737145000, 0.02086541527204288000, 0.02318379474671431300, 0.02550217422138574600, 0.02782055369605717500, 0.03013893317072860800, 0.03245731264540004100, 0.03709407159474290000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865472400, 1.000000000000000000), + ( 1.000000000000000000, 0.7075970115850837000, 1.000000000000000000), + ( 1.000000000000000000, 0.7089342781765668500, 1.000000000000000000), + ( 1.000000000000000000, 0.7125796301019340400, 1.000000000000000000), + ( 1.000000000000000000, 0.7140698102570942600, 1.000000000000000000), + ( 1.000000000000000000, 0.7168373401183549800, 1.000000000000000000), + ( 1.000000000000000000, 0.7178507260434137100, 1.000000000000000000), + ( 1.000000000000000000, 0.7200597284459038200, 1.000000000000000000), + ( 1.000000000000000000, 0.7212577850636394700, 1.000000000000000000), + ( 1.000000000000000000, 0.7251801945349658500, 1.000000000000000000), + ( 1.000000000000000000, 0.7282239506896294200, 1.000000000000000000), + ( 1.000000000000000000, 0.7355883659194953900, 1.000000000000000000), + ( 1.000000000000000000, 0.7399030273285719400, 1.000000000000000000), + ( 1.000000000000000000, 0.7505781663300151700, 1.000000000000000000), + ( 1.000000000000000000, 0.7569857375931382500, 1.000000000000000000), + ( 1.000000000000000000, 0.7725544161114862300, 1.000000000000000000), + ( 1.000000000000000000, 0.7817932707445987000, 1.000000000000000000), + ( 1.000000000000000000, 0.8032601027477255200, 1.000000000000000000), + ( 1.000000000000000000, 0.8154725684497191600, 1.000000000000000000), + ( 1.000000000000000000, 0.8413182052525661800, 1.000000000000000000), + ( 1.000000000000000000, 0.8549709358405588300, 1.000000000000000000), + ( 1.000000000000000000, 0.8813318193167576400, 1.000000000000000000), + ( 1.000000000000000000, 0.8940734682850635100, 1.000000000000000000), + ( 1.000000000000000000, 0.9178094688766209600, 1.000000000000000000), + ( 1.000000000000000000, 0.9288170236502948400, 1.000000000000000000), + ( 1.000000000000000000, 0.9486983996573730100, 1.000000000000000000), + ( 1.000000000000000000, 0.9575978644376633700, 1.000000000000000000), + ( 1.000000000000000000, 0.9728939500835595000, 1.000000000000000000), + ( 1.000000000000000000, 0.9793108764827254100, 1.000000000000000000), + ( 1.000000000000000000, 0.9947802711181359400, 1.000000000000000000), + ( 1.000000000000000000, 1.000014330393818900, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10085 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#10086 = VERTEX_POINT ( 'NONE', #4702 ) ; +#10087 = CARTESIAN_POINT ( 'NONE', ( 4.935008770588856600, -19.50349021955472000, 16.48631824550679100 ) ) ; +#10088 = CARTESIAN_POINT ( 'NONE', ( 15.27959742822051400, -95.07596123493895800, 16.84441436665427000 ) ) ; +#10089 = CARTESIAN_POINT ( 'NONE', ( 35.42837326626727900, -34.63266489681075900, 13.15255935183338400 ) ) ; +#10090 = CARTESIAN_POINT ( 'NONE', ( 6.993535118771069900, -29.82621476325174500, 26.04202207907609100 ) ) ; +#10091 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.499999999999999600, -24.99999999999999600 ) ) ; +#10092 = CARTESIAN_POINT ( 'NONE', ( 14.79571391212988700, -31.19292489269936700, 28.63912613730593600 ) ) ; +#10093 = CARTESIAN_POINT ( 'NONE', ( 33.73394150420017500, -100.0000000000000100, -31.23633444691233100 ) ) ; +#10094 = EDGE_CURVE ( 'NONE', #7258, #2637, #1014, .T. ) ; +#10095 = CARTESIAN_POINT ( 'NONE', ( 17.06397897891888600, -19.66050999306504100, 23.29592989270926800 ) ) ; +#10096 = CARTESIAN_POINT ( 'NONE', ( 37.50045830342410400, -20.40119031065684400, 7.982583053997149800 ) ) ; +#10097 = CARTESIAN_POINT ( 'NONE', ( 29.75975379269206300, -30.81929692301650500, 27.60894446415698400 ) ) ; +#10098 = CARTESIAN_POINT ( 'NONE', ( 3.550532363144278700, -28.87042587368937800, 21.75716330057233300 ) ) ; +#10099 = CARTESIAN_POINT ( 'NONE', ( 8.948161670212353900, -31.02065950290195000, 27.01165606345987100 ) ) ; +#10100 = CARTESIAN_POINT ( 'NONE', ( 36.05088346604286900, -30.27705344226597000, 23.71398351654937300 ) ) ; +#10101 = VERTEX_POINT ( 'NONE', #1489 ) ; +#10102 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10103 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4752, #5877, #12633 ), + ( #5925, #13735, #7057 ), + ( #436, #8205, #1536 ), + ( #9329, #2622, #10449 ), + ( #3738, #11577, #4842 ), + ( #12684, #5977, #13781 ), + ( #7102, #487, #8251 ), + ( #1577, #9374, #2672 ), + ( #10499, #3784, #11626 ), + ( #4887, #12728, #6026 ), + ( #13834, #7151, #535 ), + ( #8305, #1623, #9420 ), + ( #2725, #10554, #3831 ), + ( #11674, #4936, #12778 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002249472947482209200, 0.003374209421223313600, 0.004498945894964418400, 0.005623682368705522300, 0.006748418842446627200, 0.008997891789928836800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9049646166428713100, 1.000000000000000000), + ( 1.000000000000000000, 0.9182903166778636500, 1.000000000000000000), + ( 1.000000000000000000, 0.9310167369426019000, 1.000000000000000000), + ( 1.000000000000000000, 0.9485199442490837000, 1.000000000000000000), + ( 1.000000000000000000, 0.9541137654405000800, 1.000000000000000000), + ( 1.000000000000000000, 0.9644625428306847800, 1.000000000000000000), + ( 1.000000000000000000, 0.9692336333274851300, 1.000000000000000000), + ( 1.000000000000000000, 0.9778680334424876300, 1.000000000000000000), + ( 1.000000000000000000, 0.9817394468292624000, 1.000000000000000000), + ( 1.000000000000000000, 0.9883903467912649200, 1.000000000000000000), + ( 1.000000000000000000, 0.9911737408227439000, 1.000000000000000000), + ( 1.000000000000000000, 0.9978434588837857800, 1.000000000000000000), + ( 1.000000000000000000, 1.000020405302298300, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10104 = CARTESIAN_POINT ( 'NONE', ( 37.49360490087397600, -26.77890589303522600, 7.263935177081552100 ) ) ; +#10105 = CARTESIAN_POINT ( 'NONE', ( 5.385930718291680500, -29.33695615326971400, 24.66154784611260500 ) ) ; +#10106 = CARTESIAN_POINT ( 'NONE', ( 2.201425001553033700, -18.80570000621200000, 7.861549626075770000 ) ) ; +#10107 = CARTESIAN_POINT ( 'NONE', ( 34.99999998962731200, -95.07596123493894400, 12.92969265702111400 ) ) ; +#10108 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -31.29513776008465000, 28.74509265499353500 ) ) ; +#10109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10110 = CARTESIAN_POINT ( 'NONE', ( 3.536506848819689400, -28.93774931339329700, 22.04996230542032600 ) ) ; +#10111 = LINE ( 'NONE', #3800, #9235 ) ; +#10112 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -97.51638471114853200, 22.06850012136331100 ) ) ; +#10113 = CARTESIAN_POINT ( 'NONE', ( 31.64613794126191900, -30.93676997598709400, 26.75770777154207600 ) ) ; +#10114 = PERSON_AND_ORGANIZATION ( #9068, #11176 ) ; +#10115 = CARTESIAN_POINT ( 'NONE', ( 31.44276585596141900, -11.32572984136281800, -24.99999999999999300 ) ) ; +#10116 = CARTESIAN_POINT ( 'NONE', ( 28.83678554820798800, -30.81685988827648300, 27.90960423189608600 ) ) ; +#10117 = CARTESIAN_POINT ( 'NONE', ( 37.18124195692465200, -30.19458743808742400, 21.59240731687826200 ) ) ; +#10118 = ORIENTED_EDGE ( 'NONE', *, *, #12149, .F. ) ; +#10119 = CARTESIAN_POINT ( 'NONE', ( 6.062716333902350200, -21.80123094433976000, -16.98743128328841200 ) ) ; +#10120 = CARTESIAN_POINT ( 'NONE', ( 5.451229519832767600, -22.96164431728215000, 10.87928107163183200 ) ) ; +#10121 = CARTESIAN_POINT ( 'NONE', ( 4.292798477868276000, -30.90692506519914000, 23.02664085689393800 ) ) ; +#10122 = FACE_OUTER_BOUND ( 'NONE', #2243, .T. ) ; +#10123 = CARTESIAN_POINT ( 'NONE', ( 0.9847505229006574500, -10.00000000000000000, 14.00777355208056100 ) ) ; +#10124 = ADVANCED_FACE ( 'NONE', ( #1991 ), #10103, .T. ) ; +#10125 = CARTESIAN_POINT ( 'NONE', ( 30.40879127907109600, -12.49999999999941700, -20.13562862657964200 ) ) ; +#10126 = CARTESIAN_POINT ( 'NONE', ( 5.809795857537485700, -36.09178304385098100, 14.72543119225044200 ) ) ; +#10127 = APPROVAL_DATE_TIME ( #10281, #170 ) ; +#10128 = CARTESIAN_POINT ( 'NONE', ( 34.15247392106866900, -31.14395362638918700, 24.80693606491933800 ) ) ; +#10129 = ORIENTED_EDGE ( 'NONE', *, *, #11668, .T. ) ; +#10130 = CARTESIAN_POINT ( 'NONE', ( 28.28920991568102400, -24.03800385693555700, 18.57705049241894800 ) ) ; +#10131 = CARTESIAN_POINT ( 'NONE', ( 33.52255841053973700, -31.11911527918638500, 25.41530732437100000 ) ) ; +#10132 = CARTESIAN_POINT ( 'NONE', ( 5.894199385752667600, -19.95252635631880300, 17.66338686079451000 ) ) ; +#10133 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 12.00000000000000000, -19.99999999999999600 ) ) ; +#10134 = CARTESIAN_POINT ( 'NONE', ( 27.85592955888714100, -38.92039892725664200, 18.90746307147554700 ) ) ; +#10135 = CARTESIAN_POINT ( 'NONE', ( 7.019910309588966300, -30.88266602630459400, 26.01753614024255900 ) ) ; +#10136 = CARTESIAN_POINT ( 'NONE', ( 31.94337236086744600, -100.0000000000000100, 2.250973072611180700 ) ) ; +#10137 = CARTESIAN_POINT ( 'NONE', ( 4.711400130910179000, -95.01597834041014300, 10.11859031093026400 ) ) ; +#10138 = EDGE_CURVE ( 'NONE', #4636, #8795, #372, .T. ) ; +#10139 = CARTESIAN_POINT ( 'NONE', ( 10.02669833131310500, -32.54898502398805200, 27.24571251961438300 ) ) ; +#10140 = CARTESIAN_POINT ( 'NONE', ( 10.02088671369656600, -11.68383428904010100, -25.06127467795360200 ) ) ; +#10141 = CARTESIAN_POINT ( 'NONE', ( 37.60023905707211600, -19.58430109668080400, 8.191770458696229400 ) ) ; +#10142 = ORIENTED_EDGE ( 'NONE', *, *, #8555, .T. ) ; +#10143 = CARTESIAN_POINT ( 'NONE', ( 29.55554374714494200, -30.66040241785342200, 27.70390332121949200 ) ) ; +#10144 = CARTESIAN_POINT ( 'NONE', ( 2.502455040276549500, -27.32450473871246600, 8.323065577675272700 ) ) ; +#10145 = CARTESIAN_POINT ( 'NONE', ( 8.930377703552045100, -30.62009566451520800, 27.12290931751679300 ) ) ; +#10146 = CARTESIAN_POINT ( 'NONE', ( 35.45285461626040300, -29.12948496149970600, 23.69555137090117800 ) ) ; +#10147 = CARTESIAN_POINT ( 'NONE', ( 4.437373572357292200, -7.503613448058024100, 25.00000000000000000 ) ) ; +#10148 = VERTEX_POINT ( 'NONE', #13692 ) ; +#10149 = CARTESIAN_POINT ( 'NONE', ( 5.242144536099685200, -30.50125987214026300, 24.94080284332542500 ) ) ; +#10150 = CARTESIAN_POINT ( 'NONE', ( 2.586021373522274600, -10.00000000000000500, 20.65015935808747500 ) ) ; +#10151 = CARTESIAN_POINT ( 'NONE', ( 5.566595059383654800, -12.49999999999905500, 13.49166598703102000 ) ) ; +#10152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10153 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10154 = ORIENTED_EDGE ( 'NONE', *, *, #2814, .T. ) ; +#10155 = EDGE_CURVE ( 'NONE', #13964, #13049, #2578, .T. ) ; +#10156 = CARTESIAN_POINT ( 'NONE', ( 3.141661543573273500, -30.40397247928585100, 21.94362916354589600 ) ) ; +#10157 = CARTESIAN_POINT ( 'NONE', ( 35.60826129134616700, -10.00000000000001400, 22.48815993288452500 ) ) ; +#10158 = CARTESIAN_POINT ( 'NONE', ( 31.53968751813232500, -30.24767456909600200, 26.90861599088330900 ) ) ; +#10159 = CARTESIAN_POINT ( 'NONE', ( 28.83700996094782100, -30.83260001461522700, 27.90676345808490300 ) ) ; +#10160 = CARTESIAN_POINT ( 'NONE', ( 36.45777897131288400, -28.89728757757144700, 21.88321289941514500 ) ) ; +#10161 = ORIENTED_EDGE ( 'NONE', *, *, #7165, .F. ) ; +#10162 = CARTESIAN_POINT ( 'NONE', ( 27.26326059776729600, -28.65067750892442800, 28.69618489989938600 ) ) ; +#10163 = CARTESIAN_POINT ( 'NONE', ( 6.521867980033342800, -12.49999999999992500, -16.48681615752938300 ) ) ; +#10164 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5046, #11778, #9579, #2875, #10711, #3989 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001684538168796041100, 0.003369076337592082300 ), + .UNSPECIFIED. ) ; +#10165 = CARTESIAN_POINT ( 'NONE', ( 5.057050765881967000, -12.50000000000001600, 11.47896353654283900 ) ) ; +#10166 = CARTESIAN_POINT ( 'NONE', ( 5.024691798537561200, -12.23664982342098600, -22.63606209047699000 ) ) ; +#10167 = AXIS2_PLACEMENT_3D ( 'NONE', #5105, #14040, #7362 ) ; +#10168 = CARTESIAN_POINT ( 'NONE', ( 3.642178529459263000, -30.08121492181805900, 23.40402775625680900 ) ) ; +#10169 = VERTEX_POINT ( 'NONE', #2768 ) ; +#10170 = CARTESIAN_POINT ( 'NONE', ( 18.87303417523726200, -10.00000000000000200, 25.72051784877826100 ) ) ; +#10171 = CARTESIAN_POINT ( 'NONE', ( 24.07021153179723100, -12.49999999999998400, -13.97791476853632500 ) ) ; +#10172 = CARTESIAN_POINT ( 'NONE', ( 2.585639599645781100, -28.81871679749356500, 8.129340881036325700 ) ) ; +#10173 = CARTESIAN_POINT ( 'NONE', ( 34.18833368143354800, -30.08336645899978000, 25.39170881664967500 ) ) ; +#10174 = VERTEX_POINT ( 'NONE', #8399 ) ; +#10175 = CARTESIAN_POINT ( 'NONE', ( 29.33371917932134200, -12.50000000000007500, 20.03476048409334000 ) ) ; +#10176 = EDGE_CURVE ( 'NONE', #4379, #324, #6591, .T. ) ; +#10177 = CARTESIAN_POINT ( 'NONE', ( 33.52106518987333300, -30.00411164872448200, 25.80048320424285500 ) ) ; +#10178 = CARTESIAN_POINT ( 'NONE', ( 10.85428227087984300, -30.85522860743894200, 27.80725121617811300 ) ) ; +#10179 = CARTESIAN_POINT ( 'NONE', ( 6.934314030485026600, -20.32288170233922000, 18.76001118882389600 ) ) ; +#10180 = CARTESIAN_POINT ( 'NONE', ( 23.95802601515758200, -28.02249789462741700, 27.50536073505437100 ) ) ; +#10181 = CARTESIAN_POINT ( 'NONE', ( 34.98156109074923100, -22.39051872776016000, -12.76055480531655000 ) ) ; +#10182 = CARTESIAN_POINT ( 'NONE', ( 7.019911428226818000, -30.11707717050704100, 26.15254441886198600 ) ) ; +#10183 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 16.29999999999999000 ) ) ; +#10184 = VERTEX_POINT ( 'NONE', #4988 ) ; +#10185 = CARTESIAN_POINT ( 'NONE', ( 39.99411415051214600, -10.02354339795136300, 10.61050925948024900 ) ) ; +#10186 = CARTESIAN_POINT ( 'NONE', ( 5.501536228775354000, -31.43984379204612600, 22.94330155308235000 ) ) ; +#10187 = CARTESIAN_POINT ( 'NONE', ( 37.78282031101218800, -18.80976069429303300, 8.599670403775507000 ) ) ; +#10188 = EDGE_LOOP ( 'NONE', ( #10673, #8033, #1846 ) ) ; +#10189 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10190 = CARTESIAN_POINT ( 'NONE', ( 9.048209205999993900, -31.03769255554809400, 27.05046685828880700 ) ) ; +#10191 = CARTESIAN_POINT ( 'NONE', ( 35.98053928080704400, -30.01411263428879600, 23.88693131769261400 ) ) ; +#10192 = CARTESIAN_POINT ( 'NONE', ( 30.95795823901643500, -29.00785338947719100, 27.50591273516581100 ) ) ; +#10193 = ADVANCED_FACE ( 'NONE', ( #11858 ), #10655, .F. ) ; +#10194 = ORIENTED_EDGE ( 'NONE', *, *, #4787, .T. ) ; +#10195 = EDGE_CURVE ( 'NONE', #3340, #9900, #8541, .T. ) ; +#10196 = CARTESIAN_POINT ( 'NONE', ( 23.82852264391154800, -18.84871335435227700, 23.43973309106942400 ) ) ; +#10197 = CARTESIAN_POINT ( 'NONE', ( 5.460600710785379300, -29.52182336367444300, 24.87289156382288300 ) ) ; +#10198 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#10199 = CIRCLE ( 'NONE', #11305, 5.000000000000000900 ) ; +#10200 = CARTESIAN_POINT ( 'NONE', ( 15.38858679474441400, -12.50000000000000000, 8.944841118423347800 ) ) ; +#10201 = CARTESIAN_POINT ( 'NONE', ( 0.4703467738069042600, -11.88138709522754500, 8.024999538487305600 ) ) ; +#10202 = CARTESIAN_POINT ( 'NONE', ( 36.59617562163180100, -30.83427900095885800, 23.83329399248281500 ) ) ; +#10203 = ORIENTED_EDGE ( 'NONE', *, *, #9807, .T. ) ; +#10204 = CARTESIAN_POINT ( 'NONE', ( 3.141609101548271900, -29.17313207434487400, 22.15832001125025000 ) ) ; +#10205 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 5.300654457352232300, -20.22358027453074700 ) ) ; +#10206 = CARTESIAN_POINT ( 'NONE', ( 31.56264987139101300, -30.73571773590898100, 26.87190917307217600 ) ) ; +#10207 = CARTESIAN_POINT ( 'NONE', ( 17.58104403529382900, -19.88166485118808400, 23.25759587241711300 ) ) ; +#10208 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457651600, -30.82655086342983700, 27.93782961424066300 ) ) ; +#10209 = CARTESIAN_POINT ( 'NONE', ( 37.47578199177326000, -29.85059434896947300, 21.71650477198748100 ) ) ; +#10210 = CARTESIAN_POINT ( 'NONE', ( 29.32865555073652800, -20.25876296596183200, 21.55077192929898200 ) ) ; +#10211 = CARTESIAN_POINT ( 'NONE', ( 15.16998729457424100, -12.50000000000002300, 8.499345765978953100 ) ) ; +#10212 = CARTESIAN_POINT ( 'NONE', ( 3.560249138084936600, -30.56614510144407100, 21.52590704274819800 ) ) ; +#10213 = CARTESIAN_POINT ( 'NONE', ( 4.291426327199594000, -29.07224618524040200, 23.35035084821080900 ) ) ; +#10214 = CIRCLE ( 'NONE', #14302, 5.000000000000000900 ) ; +#10215 = VERTEX_POINT ( 'NONE', #7292 ) ; +#10216 = FACE_OUTER_BOUND ( 'NONE', #2889, .T. ) ; +#10217 = CARTESIAN_POINT ( 'NONE', ( 11.61160146261154900, -19.59961489010723700, 22.12370266494247800 ) ) ; +#10218 = CARTESIAN_POINT ( 'NONE', ( 29.76459481750643800, -21.08820147860996000, -22.08644624374864300 ) ) ; +#10219 = CARTESIAN_POINT ( 'NONE', ( 34.07208529222487000, -30.99384939434374400, 25.08363279756932600 ) ) ; +#10220 = ORIENTED_EDGE ( 'NONE', *, *, #13396, .F. ) ; +#10221 = CARTESIAN_POINT ( 'NONE', ( 23.81605744327726600, -12.50000000000002700, 9.755552998041070000 ) ) ; +#10222 = CARTESIAN_POINT ( 'NONE', ( 33.52107222570741400, -30.86834425726678800, 25.64810687880369900 ) ) ; +#10223 = CARTESIAN_POINT ( 'NONE', ( 10.85515163631154900, -30.79307723152665600, 27.81916039294607400 ) ) ; +#10224 = CARTESIAN_POINT ( 'NONE', ( 9.548600072026147200, -19.12546663889308700, 21.14917818182567500 ) ) ; +#10225 = CARTESIAN_POINT ( 'NONE', ( 34.44446101291148900, -12.50000000000018700, -14.31912536730132700 ) ) ; +#10226 = CARTESIAN_POINT ( 'NONE', ( 7.348774841205350400, -31.11140144313510100, 26.06720045124797400 ) ) ; +#10227 = FACE_OUTER_BOUND ( 'NONE', #1256, .T. ) ; +#10228 = ORIENTED_EDGE ( 'NONE', *, *, #4680, .F. ) ; +#10229 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, -19.99999999999999600 ) ) ; +#10230 = CARTESIAN_POINT ( 'NONE', ( 1.614868852529524700, -11.88566888619447100, 14.28503795611363700 ) ) ; +#10231 = CARTESIAN_POINT ( 'NONE', ( 37.37976269431646900, -21.06557224158284900, 9.805875248583616300 ) ) ; +#10232 = ORIENTED_EDGE ( 'NONE', *, *, #9023, .T. ) ; +#10233 = CARTESIAN_POINT ( 'NONE', ( 16.27901019514898800, -18.76450216817883600, 23.45458179527229300 ) ) ; +#10234 = CARTESIAN_POINT ( 'NONE', ( 9.029064801946828900, -30.71776654922295400, 27.15067745719334300 ) ) ; +#10235 = CARTESIAN_POINT ( 'NONE', ( 35.47389064655740800, -30.95307058944329600, 23.38828761871737800 ) ) ; +#10236 = CARTESIAN_POINT ( 'NONE', ( 33.57810624317093600, -28.44677993672191700, 24.09817986794094200 ) ) ; +#10237 = EDGE_CURVE ( 'NONE', #7893, #12814, #4857, .T. ) ; +#10238 = CIRCLE ( 'NONE', #7529, 3.189999999999995100 ) ; +#10239 = CARTESIAN_POINT ( 'NONE', ( 24.45167412476847000, -17.63795530102205000, 23.65322240298460700 ) ) ; +#10240 = CARTESIAN_POINT ( 'NONE', ( 5.716049981276540800, -30.88896819180776300, 25.01356038921180100 ) ) ; +#10241 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.23251461448908700, -11.67660596385688400 ) ) ; +#10242 = CARTESIAN_POINT ( 'NONE', ( 7.237128128432097200, -23.48918379756918300, 14.65886201274354800 ) ) ; +#10243 = CARTESIAN_POINT ( 'NONE', ( 0.3226449443118326000, -11.29057977724726300, 9.738761650130676600 ) ) ; +#10244 = CARTESIAN_POINT ( 'NONE', ( 32.33907054267997700, -32.10897044986813100, 24.20058394599745500 ) ) ; +#10245 = ORIENTED_EDGE ( 'NONE', *, *, #3375, .T. ) ; +#10246 = AXIS2_PLACEMENT_3D ( 'NONE', #6731, #134, #7869 ) ; +#10247 = CARTESIAN_POINT ( 'NONE', ( 3.636301958836877000, -30.64967951875662800, 22.01965851567612700 ) ) ; +#10248 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, -19.87270537885228100, 23.25917566912282200 ) ) ; +#10249 = CARTESIAN_POINT ( 'NONE', ( 11.22937329422754300, -31.29892962639993600, 27.84384942420436500 ) ) ; +#10250 = CARTESIAN_POINT ( 'NONE', ( 31.33900488069668500, -30.22368522546012300, 26.99669156033611400 ) ) ; +#10251 = CARTESIAN_POINT ( 'NONE', ( 17.59442521399260800, -19.87093624336306200, 23.25948761544210400 ) ) ; +#10252 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650500, -30.82655086342983700, 27.93782961424065500 ) ) ; +#10253 = CARTESIAN_POINT ( 'NONE', ( 36.42657075263374400, -30.58071613472507600, 21.58631840597533400 ) ) ; +#10254 = CARTESIAN_POINT ( 'NONE', ( 16.66691576264561200, -100.0000000000000100, 6.630571736238759500 ) ) ; +#10255 = CARTESIAN_POINT ( 'NONE', ( 30.66509367227172700, -27.10662605393411800, 19.57976620880502600 ) ) ; +#10256 = CARTESIAN_POINT ( 'NONE', ( 4.546902354672756300, -30.97020252523837400, 23.37075692845555300 ) ) ; +#10257 = EDGE_CURVE ( 'NONE', #3340, #13375, #8893, .T. ) ; +#10258 = CARTESIAN_POINT ( 'NONE', ( 4.014234127188359500, -30.43959678147235300, 23.64946327402927300 ) ) ; +#10259 = CARTESIAN_POINT ( 'NONE', ( 16.84388622020873400, -12.50000000000003700, -14.46528094839968600 ) ) ; +#10260 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10261 = ADVANCED_FACE ( 'NONE', ( #3292 ), #8181, .F. ) ; +#10262 = CARTESIAN_POINT ( 'NONE', ( 22.39671145299328000, -30.66083836454515700, 28.85693675227421600 ) ) ; +#10263 = CARTESIAN_POINT ( 'NONE', ( 28.67939683357426600, -12.49999999999993600, -21.30912232422919300 ) ) ; +#10264 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141808200, -28.87043262030299900, 21.75755471858354500 ) ) ; +#10265 = CARTESIAN_POINT ( 'NONE', ( 33.81845822144300900, -29.75304399012910400, 25.51070844890603300 ) ) ; +#10266 = CARTESIAN_POINT ( 'NONE', ( 29.48538786295653600, -23.93864290584945600, 17.86869454588860200 ) ) ; +#10267 = CARTESIAN_POINT ( 'NONE', ( 33.26753338432750700, -29.75669220419363400, 25.85770431975215200 ) ) ; +#10268 = CARTESIAN_POINT ( 'NONE', ( 11.05966411544290800, -30.84518153472544500, 27.87328429816820100 ) ) ; +#10269 = CARTESIAN_POINT ( 'NONE', ( 10.91869203178771400, -19.45130686427617000, 21.81575050221836800 ) ) ; +#10270 = CARTESIAN_POINT ( 'NONE', ( 24.94331058841894900, -12.49999999999992000, -12.51831343595855200 ) ) ; +#10271 = CARTESIAN_POINT ( 'NONE', ( 4.908004008123618300, -12.49999999999830000, 8.358557495004978600 ) ) ; +#10272 = CARTESIAN_POINT ( 'NONE', ( 22.55794980690657100, -33.35025653084942100, 26.50741664928542100 ) ) ; +#10273 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -12.50000000000001100, 7.564513562858110200 ) ) ; +#10274 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999998900, -12.50000000000001100, 7.564513562858116400 ) ) ; +#10275 = EDGE_CURVE ( 'NONE', #5004, #9371, #11512, .T. ) ; +#10276 = CARTESIAN_POINT ( 'NONE', ( 37.14060630684480200, -20.24693323510856800, 11.31540991258607100 ) ) ; +#10277 = CARTESIAN_POINT ( 'NONE', ( 9.047265354172141700, -30.33466466947924500, 27.17659061251853100 ) ) ; +#10278 = CARTESIAN_POINT ( 'NONE', ( 35.69953537096088800, -29.71563198789331800, 24.06921533938954000 ) ) ; +#10279 = LINE ( 'NONE', #10422, #4331 ) ; +#10280 = CARTESIAN_POINT ( 'NONE', ( 26.96912221961437000, -13.15909305069349600, 24.34452114344930600 ) ) ; +#10281 = DATE_AND_TIME ( #10453, #10469 ) ; +#10282 = CARTESIAN_POINT ( 'NONE', ( 5.647507661682142000, -29.98260960067457900, 25.25607791526265400 ) ) ; +#10283 = DIRECTION ( 'NONE', ( -0.8967904746268226000, 0.0000000000000000000, 0.4424554719049115800 ) ) ; +#10284 = ORIENTED_EDGE ( 'NONE', *, *, #6986, .F. ) ; +#10285 = CARTESIAN_POINT ( 'NONE', ( 7.019155415662860200, -12.49999999999978700, 16.44488657830702400 ) ) ; +#10286 = CARTESIAN_POINT ( 'NONE', ( 25.87752246434077100, -31.13225233317285800, 28.52674198570098300 ) ) ; +#10287 = CARTESIAN_POINT ( 'NONE', ( 2.756158847980726200, -29.57833220681839100, 22.19291957642888800 ) ) ; +#10288 = CARTESIAN_POINT ( 'NONE', ( 31.36713448924567500, -30.64046953888235700, 26.98535782019268200 ) ) ; +#10289 = CARTESIAN_POINT ( 'NONE', ( 37.39472852803856300, -29.52638134026910400, 21.88394651546065700 ) ) ; +#10290 = FACE_OUTER_BOUND ( 'NONE', #3253, .T. ) ; +#10291 = CARTESIAN_POINT ( 'NONE', ( 11.19896521564827000, -22.03500000000001400, 18.67366622947770700 ) ) ; +#10292 = CARTESIAN_POINT ( 'NONE', ( 36.13599312091014300, -28.87841121485388700, 22.48717408495694800 ) ) ; +#10293 = CARTESIAN_POINT ( 'NONE', ( 6.497781307659003900, -31.16893502338438900, 25.37680195652748700 ) ) ; +#10294 = ORIENTED_EDGE ( 'NONE', *, *, #14390, .T. ) ; +#10295 = CARTESIAN_POINT ( 'NONE', ( 4.305108955169499700, -29.30185408590864800, 23.68282659333645100 ) ) ; +#10296 = CARTESIAN_POINT ( 'NONE', ( 31.61286691103214300, -15.49616678942702600, -25.96912249545363900 ) ) ; +#10297 = CARTESIAN_POINT ( 'NONE', ( 33.43898173668866700, -19.70146691064722300, 18.53219877583955700 ) ) ; +#10298 = CARTESIAN_POINT ( 'NONE', ( 27.58071813450161300, -11.68824579519291600, 24.56241373383335600 ) ) ; +#10299 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000001400, -9.552857339724504000, 11.61046750053785100 ) ) ; +#10300 = AXIS2_PLACEMENT_3D ( 'NONE', #4369, #7749, #4413 ) ; +#10301 = CARTESIAN_POINT ( 'NONE', ( 23.73029842426237600, -12.49999999999998600, -14.21659270155046300 ) ) ; +#10302 = CARTESIAN_POINT ( 'NONE', ( 36.42641074511446000, -10.00000000000000000, -21.69295256265028700 ) ) ; +#10303 = CARTESIAN_POINT ( 'NONE', ( 31.21782926814883700, -12.50000000000031600, 18.55216611545298700 ) ) ; +#10304 = CARTESIAN_POINT ( 'NONE', ( 33.38987264142134800, -30.59399369337977600, 25.89357160135266200 ) ) ; +#10305 = ORIENTED_EDGE ( 'NONE', *, *, #8018, .T. ) ; +#10306 = CARTESIAN_POINT ( 'NONE', ( 11.06048174945208000, -30.81733855603500800, 27.87863069100074000 ) ) ; +#10307 = CARTESIAN_POINT ( 'NONE', ( 12.31847624062911000, -19.73491083655383700, 22.35479474587490900 ) ) ; +#10308 = CARTESIAN_POINT ( 'NONE', ( 5.764456481717510300, -21.90317896980273800, -16.25563821237060900 ) ) ; +#10309 = CARTESIAN_POINT ( 'NONE', ( 39.99726015004258500, -10.00000000000000000, -20.16550224408271000 ) ) ; +#10310 = CARTESIAN_POINT ( 'NONE', ( 34.47613449875733900, -22.00393477521079800, -15.53260150784647900 ) ) ; +#10311 = CARTESIAN_POINT ( 'NONE', ( 15.04850393913212500, -12.49999999999999100, 8.069621052717266700 ) ) ; +#10312 = EDGE_CURVE ( 'NONE', #3143, #7302, #14190, .T. ) ; +#10313 = CARTESIAN_POINT ( 'NONE', ( 47.49999999999998600, -21.23105625617651900, 0.0000000000000000000 ) ) ; +#10314 = CARTESIAN_POINT ( 'NONE', ( 22.66765221872199000, -12.50000000000001800, 10.14164662228683300 ) ) ; +#10315 = CARTESIAN_POINT ( 'NONE', ( 5.326032883974394700, -95.07596123492291400, 14.34932200963510600 ) ) ; +#10316 = ORIENTED_EDGE ( 'NONE', *, *, #13855, .F. ) ; +#10317 = CARTESIAN_POINT ( 'NONE', ( 36.83109219144700600, -19.53885992188919800, 12.82610208661199300 ) ) ; +#10318 = CARTESIAN_POINT ( 'NONE', ( 35.26214535946832700, -10.00000000000000000, -23.75180367221042500 ) ) ; +#10319 = CARTESIAN_POINT ( 'NONE', ( 9.231024758642389500, -30.83081124424366900, 27.21033578469835800 ) ) ; +#10320 = CARTESIAN_POINT ( 'NONE', ( 35.56649955362051000, -30.74481993117172300, 23.78172542984240300 ) ) ; +#10321 = ORIENTED_EDGE ( 'NONE', *, *, #4540, .F. ) ; +#10322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10323 = ADVANCED_FACE ( 'NONE', ( #3279 ), #9024, .T. ) ; +#10324 = CARTESIAN_POINT ( 'NONE', ( 5.997304579089448100, -31.13617734009984500, 24.96846670540211500 ) ) ; +#10325 = ORIENTED_EDGE ( 'NONE', *, *, #4767, .F. ) ; +#10326 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2410, #1370, #3576 ), + ( #11414, #4683, #12526 ), + ( #5812, #13617, #7139 ), + ( #523, #8290, #1611 ), + ( #9409, #2712, #10539 ), + ( #3820, #11661, #4919 ), + ( #12765, #6056, #13866 ), + ( #7184, #565, #8338 ), + ( #1658, #9453, #2754 ), + ( #10592, #3871, #11709 ), + ( #4973, #12812, #6100 ), + ( #13906, #7233, #606 ), + ( #8383, #1703, #9506 ), + ( #2800, #10639, #3919 ), + ( #11756, #5021, #12865 ), + ( #6148, #13958, #7276 ), + ( #653, #8430, #1748 ), + ( #9556, #2845, #10683 ), + ( #3963, #11800, #5073 ), + ( #12912, #6205, #14008 ), + ( #7330, #702, #8483 ), + ( #1801, #9610, #2901 ), + ( #10740, #4013, #11851 ), + ( #5126, #12963, #6253 ), + ( #14064, #7388, #754 ), + ( #8534, #1856, #9664 ), + ( #2958, #10798, #4066 ), + ( #11905, #5180, #13020 ), + ( #6308, #14120, #7449 ), + ( #809, #8593, #1907 ), + ( #9722, #3011, #10858 ), + ( #4122, #11961, #5233 ), + ( #13073, #6365, #14173 ), + ( #7503, #864, #8644 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.02764309142388470700, 0.02774193960266046700, 0.02779136369204834900, 0.02784078778143622700, 0.02803848413898775100, 0.02843387685409079500, 0.02922466228429688300, 0.03080623314470905600, 0.03238780400512122900, 0.03396937486553340500, 0.03713251658635775100, 0.04029565830718209700, 0.04345880002800645000, 0.04504037088841862700, 0.04662194174883079600, 0.04978508346965514200, 0.05294822519047949500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7881774158533170200, 1.000000000000000000), + ( 1.000000000000000000, 0.7881835580671492400, 1.000000000000000000), + ( 1.000000000000000000, 0.7881897016914313200, 1.000000000000000000), + ( 1.000000000000000000, 0.7881989192449835300, 1.000000000000000000), + ( 1.000000000000000000, 0.7882019921156873100, 1.000000000000000000), + ( 1.000000000000000000, 0.7882081385630446100, 1.000000000000000000), + ( 1.000000000000000000, 0.7882103754068200400, 1.000000000000000000), + ( 1.000000000000000000, 0.7882235141199092100, 1.000000000000000000), + ( 1.000000000000000000, 0.7882339848561199500, 1.000000000000000000), + ( 1.000000000000000000, 0.7882652800310874200, 1.000000000000000000), + ( 1.000000000000000000, 0.7882859875580772200, 1.000000000000000000), + ( 1.000000000000000000, 0.7883476672907583400, 1.000000000000000000), + ( 1.000000000000000000, 0.7883881985640187600, 1.000000000000000000), + ( 1.000000000000000000, 0.7885081563999826200, 1.000000000000000000), + ( 1.000000000000000000, 0.7885859780687377600, 1.000000000000000000), + ( 1.000000000000000000, 0.7887372728925260400, 1.000000000000000000), + ( 1.000000000000000000, 0.7888109323892885700, 1.000000000000000000), + ( 1.000000000000000000, 0.7889514429229403900, 1.000000000000000000), + ( 1.000000000000000000, 0.7890185826265786500, 1.000000000000000000), + ( 1.000000000000000000, 0.7892117570967190900, 1.000000000000000000), + ( 1.000000000000000000, 0.7893290185969865600, 1.000000000000000000), + ( 1.000000000000000000, 0.7895416011833504800, 1.000000000000000000), + ( 1.000000000000000000, 0.7896384133770183400, 1.000000000000000000), + ( 1.000000000000000000, 0.7898075767507543000, 1.000000000000000000), + ( 1.000000000000000000, 0.7898803022557836500, 1.000000000000000000), + ( 1.000000000000000000, 0.7899753314858315400, 1.000000000000000000), + ( 1.000000000000000000, 0.7900043235389669900, 1.000000000000000000), + ( 1.000000000000000000, 0.7900579948245755000, 1.000000000000000000), + ( 1.000000000000000000, 0.7900828251248943600, 1.000000000000000000), + ( 1.000000000000000000, 0.7901513616860645900, 1.000000000000000000), + ( 1.000000000000000000, 0.7901876263333287300, 1.000000000000000000), + ( 1.000000000000000000, 0.7902470642079693100, 1.000000000000000000), + ( 1.000000000000000000, 0.7902708488646510400, 1.000000000000000000), + ( 1.000000000000000000, 0.7902880407000902900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10327 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#10328 = CARTESIAN_POINT ( 'NONE', ( 22.54594542586619400, -33.17879905958957900, 28.41295234537446400 ) ) ; +#10329 = CARTESIAN_POINT ( 'NONE', ( 17.54089027073304400, -30.66221341016721900, 28.85669429463133900 ) ) ; +#10330 = EDGE_CURVE ( 'NONE', #6987, #6101, #5525, .T. ) ; +#10331 = CARTESIAN_POINT ( 'NONE', ( 3.853505960285810200, -30.75416420444154000, 22.30742832973658500 ) ) ; +#10332 = ORIENTED_EDGE ( 'NONE', *, *, #3581, .F. ) ; +#10333 = CARTESIAN_POINT ( 'NONE', ( 31.33908184583836800, -31.07055816106294800, 26.84753972899693900 ) ) ; +#10334 = CARTESIAN_POINT ( 'NONE', ( 36.48106837607304000, -30.57471582741090900, 21.70538457832724100 ) ) ; +#10335 = CARTESIAN_POINT ( 'NONE', ( 7.536133408201110700, -100.0000000000000100, 1.632021064356446300 ) ) ; +#10336 = CARTESIAN_POINT ( 'NONE', ( 35.04976203753739800, -21.88276223689656100, 16.02680115676114500 ) ) ; +#10337 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 8.200000000000013500, 17.50000000000000400 ) ) ; +#10338 = ORIENTED_EDGE ( 'NONE', *, *, #4867, .F. ) ; +#10339 = CARTESIAN_POINT ( 'NONE', ( 8.757135967411503700, -31.06351299934347000, 26.89903447953404500 ) ) ; +#10340 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #7843, #1194 ) ; +#10341 = VECTOR ( 'NONE', #11061, 999.9999999999998900 ) ; +#10342 = CARTESIAN_POINT ( 'NONE', ( 4.374955159311998200, -30.81644929186440900, 23.51388123600719400 ) ) ; +#10343 = CARTESIAN_POINT ( 'NONE', ( 36.77283610689262600, -14.12594571017374500, -19.94493447247195700 ) ) ; +#10344 = CARTESIAN_POINT ( 'NONE', ( 11.47902557295625800, -10.21062104618570400, -25.03459841195475000 ) ) ; +#10345 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10966, #2007, #12061, #5337 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.1893661289607659300, 0.8809377781777869600 ), + .UNSPECIFIED. ) ; +#10346 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10347 = CARTESIAN_POINT ( 'NONE', ( 15.01568992271439900, -12.50000000000002800, 7.897085911900092000 ) ) ; +#10348 = EDGE_LOOP ( 'NONE', ( #6096, #10232 ) ) ; +#10349 = CARTESIAN_POINT ( 'NONE', ( 27.31115350309015700, -20.89802831780065200, -23.44078708704934800 ) ) ; +#10350 = CARTESIAN_POINT ( 'NONE', ( 34.31643056200918100, -12.29954606367756400, -23.14960760001674300 ) ) ; +#10351 = CARTESIAN_POINT ( 'NONE', ( 24.22247876544665200, -12.50000000000004100, 9.432290506598278100 ) ) ; +#10352 = EDGE_CURVE ( 'NONE', #12041, #8776, #1248, .T. ) ; +#10353 = CARTESIAN_POINT ( 'NONE', ( 33.16349595254224900, -29.72174655257009200, 25.90376238831919800 ) ) ; +#10354 = ORIENTED_EDGE ( 'NONE', *, *, #9617, .F. ) ; +#10355 = CARTESIAN_POINT ( 'NONE', ( 11.05966631315866000, -30.78700843736303100, 27.88354301409913900 ) ) ; +#10356 = CARTESIAN_POINT ( 'NONE', ( 13.75620721846211200, -19.98661375696459400, 22.76570137192140600 ) ) ; +#10357 = CARTESIAN_POINT ( 'NONE', ( 6.046945038003721100, -12.50000000000004800, -15.55449635866234500 ) ) ; +#10358 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -10.00000000000000000, 25.00000000000000000 ) ) ; +#10359 = CARTESIAN_POINT ( 'NONE', ( 33.88203046598446400, -12.49999999999926600, -15.70778923001518600 ) ) ; +#10360 = VECTOR ( 'NONE', #5404, 1000.000000000000000 ) ; +#10361 = CARTESIAN_POINT ( 'NONE', ( 5.309915372621955700, -22.88358766866082000, 10.31589744337069100 ) ) ; +#10362 = CARTESIAN_POINT ( 'NONE', ( 0.02832571919072554200, 9.894175532731914300, 16.11130155685650000 ) ) ; +#10363 = CARTESIAN_POINT ( 'NONE', ( 9.173626172908875300, -94.71789415301141400, 17.26249518529119700 ) ) ; +#10364 = VERTEX_POINT ( 'NONE', #7515 ) ; +#10365 = CARTESIAN_POINT ( 'NONE', ( 36.21340172875466800, -18.96305756862609800, 14.80916776319781500 ) ) ; +#10366 = CARTESIAN_POINT ( 'NONE', ( 36.97131799463245000, -20.11807079733537400, -15.69528069736614400 ) ) ; +#10367 = CARTESIAN_POINT ( 'NONE', ( 1.743593520084010700, -10.03611601363736300, -19.20996545840277700 ) ) ; +#10368 = CARTESIAN_POINT ( 'NONE', ( 9.235054411503176300, -30.49421035390654600, 27.26031145994948100 ) ) ; +#10369 = CARTESIAN_POINT ( 'NONE', ( 35.36771345962845500, -29.32361512392585500, 24.01981862048490500 ) ) ; +#10370 = CIRCLE ( 'NONE', #919, 2.500000000000000900 ) ; +#10371 = ORIENTED_EDGE ( 'NONE', *, *, #12835, .T. ) ; +#10372 = CARTESIAN_POINT ( 'NONE', ( 37.50061712524598800, -19.99753149900933700, 7.847116941117794100 ) ) ; +#10373 = VECTOR ( 'NONE', #3187, 1000.000000000000000 ) ; +#10374 = CARTESIAN_POINT ( 'NONE', ( 9.625746200316911000, -20.13968141776443900, 20.95244600405782600 ) ) ; +#10375 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.26143653039416400, 7.897715615681165400 ) ) ; +#10376 = CARTESIAN_POINT ( 'NONE', ( 5.781784186274754800, -30.30039862902883700, 25.38954999620262900 ) ) ; +#10377 = VERTEX_POINT ( 'NONE', #916 ) ; +#10378 = CARTESIAN_POINT ( 'NONE', ( 25.33916572666214500, -24.19186957606941100, 19.67176118101229000 ) ) ; +#10379 = CARTESIAN_POINT ( 'NONE', ( 4.106516923297135700, -12.14537491121995300, -21.78170133422605700 ) ) ; +#10380 = CARTESIAN_POINT ( 'NONE', ( 18.87303417523727600, -10.00000000000000200, -29.24705746294735300 ) ) ; +#10381 = CARTESIAN_POINT ( 'NONE', ( 2.916315371528469800, -29.98030326669619700, 22.44440837257944200 ) ) ; +#10382 = VECTOR ( 'NONE', #5495, 1000.000000000000000 ) ; +#10383 = ORIENTED_EDGE ( 'NONE', *, *, #13836, .T. ) ; +#10384 = CARTESIAN_POINT ( 'NONE', ( 31.26556879678830100, -30.53251834768944000, 27.04393612913568700 ) ) ; +#10385 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -30.66316004086981600, 28.85652737809770600 ) ) ; +#10386 = CARTESIAN_POINT ( 'NONE', ( 7.348771674060840200, -29.91912253690363200, 26.27744807171208300 ) ) ; +#10387 = CARTESIAN_POINT ( 'NONE', ( 36.92031906646076300, -29.15239411684138900, 22.00680230363241900 ) ) ; +#10388 = CARTESIAN_POINT ( 'NONE', ( 5.316543822095354700, -22.03500000000001400, 10.52349470135041900 ) ) ; +#10389 = CARTESIAN_POINT ( 'NONE', ( 36.09898339638604600, -26.10231213338448300, 13.55104422139365500 ) ) ; +#10390 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10391 = CARTESIAN_POINT ( 'NONE', ( 11.26586904079728800, -30.82654731345162700, 27.93780948131385200 ) ) ; +#10392 = ORIENTED_EDGE ( 'NONE', *, *, #3476, .F. ) ; +#10393 = CARTESIAN_POINT ( 'NONE', ( 4.098687375907205800, -29.74849322676505600, 23.88264503446850300 ) ) ; +#10394 = CARTESIAN_POINT ( 'NONE', ( 28.58766869589526000, -11.00003412414703200, 24.59282357528372400 ) ) ; +#10395 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.35820823926674400, 15.16585386236131100 ) ) ; +#10396 = CARTESIAN_POINT ( 'NONE', ( 10.21611360507987800, -10.41743565794053700, -24.99999999999999600 ) ) ; +#10397 = CYLINDRICAL_SURFACE ( 'NONE', #14319, 10.00000000000000200 ) ; +#10398 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#10399 = ADVANCED_FACE ( 'NONE', ( #5187 ), #10593, .T. ) ; +#10400 = CARTESIAN_POINT ( 'NONE', ( 11.84238396926419600, -28.91241607557457600, 28.45846857204347900 ) ) ; +#10401 = VERTEX_POINT ( 'NONE', #2016 ) ; +#10402 = CARTESIAN_POINT ( 'NONE', ( 26.51137871228322100, -12.50000000000017900, -22.28024563524161300 ) ) ; +#10403 = EDGE_CURVE ( 'NONE', #7419, #13375, #13567, .T. ) ; +#10404 = CARTESIAN_POINT ( 'NONE', ( 31.75598008163149500, -10.00000000000000000, -27.26713276584304400 ) ) ; +#10405 = CARTESIAN_POINT ( 'NONE', ( 31.73968237187745000, -23.66895540839862700, 15.94304785582221000 ) ) ; +#10406 = CARTESIAN_POINT ( 'NONE', ( 33.30187650150669800, -30.41992288507925200, 25.99068937354151000 ) ) ; +#10407 = ORIENTED_EDGE ( 'NONE', *, *, #7489, .T. ) ; +#10408 = CARTESIAN_POINT ( 'NONE', ( 11.16310162830247600, -30.82599872997559500, 27.90796613346481100 ) ) ; +#10409 = CARTESIAN_POINT ( 'NONE', ( 15.71114979819078500, -19.18338428953219900, 23.31269655824933900 ) ) ; +#10410 = CARTESIAN_POINT ( 'NONE', ( 15.08303430330587800, -12.49999999999998600, -12.63260057506367300 ) ) ; +#10411 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10412 = CARTESIAN_POINT ( 'NONE', ( 24.79934393021435200, -12.50000000000001400, -12.98496595907236200 ) ) ; +#10413 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( + ( #3568, #13610, #6925, #318, #8072, #1409, #9205, #2502, #10318, #3613, #11458, #4722, #12559, #5853, #13660, #6973, #364, #8124 ), + ( #1454, #9252, #2550, #10366, #3657, #11504, #4772, #12604, #5898, #13711, #7026, #410, #8174, #1510, #9298, #2598, #10421, #3710 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 2, 2 ), + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 4.712388980384689700, 4.918555998276519700, 5.124723016168349700, 5.330890034060180600, 5.537057051952010600, 5.743224069843840600, 5.949391087735671500, 6.155558105627501500, 6.361725123519331500 ), + .UNSPECIFIED. ) ; +#10414 = CIRCLE ( 'NONE', #14337, 2.499999999999996900 ) ; +#10415 = CARTESIAN_POINT ( 'NONE', ( 8.302075813889398900, -19.25172557169844000, -24.02544552484527400 ) ) ; +#10416 = CARTESIAN_POINT ( 'NONE', ( 28.19654051330161000, -95.07596123493894400, 17.19136527824030800 ) ) ; +#10417 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -30.66316004086981200, 28.85652737809770600 ) ) ; +#10418 = CARTESIAN_POINT ( 'NONE', ( 16.37246926233631700, -95.07596123493894400, 16.93034213520574800 ) ) ; +#10419 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2822, #12891, #13986, #7308, #682, #8461, #1777, #9582, #2878, #10715, #3991, #11830 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 1.993045536433795100E-017, 0.001047246058179391400, 0.002094492116358762800, 0.004188984232717507400, 0.006283476349076251100, 0.008377968465434995600 ), + .UNSPECIFIED. ) ; +#10420 = CARTESIAN_POINT ( 'NONE', ( 34.38750413030113200, -20.45078601427242400, 17.22887322071237600 ) ) ; +#10421 = CARTESIAN_POINT ( 'NONE', ( 22.35077160798172700, -20.43512526112681400, -26.87524878958415500 ) ) ; +#10422 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#10423 = CARTESIAN_POINT ( 'NONE', ( 9.338288603220883400, -30.96119816598047300, 27.21223818373130100 ) ) ; +#10424 = CARTESIAN_POINT ( 'NONE', ( 35.69449088688206500, -30.37724780960472200, 24.11273767972874900 ) ) ; +#10425 = ORIENTED_EDGE ( 'NONE', *, *, #14271, .T. ) ; +#10426 = CARTESIAN_POINT ( 'NONE', ( 17.59604506507653100, -27.96340410149423800, 27.45756719153395400 ) ) ; +#10427 = EDGE_CURVE ( 'NONE', #6075, #9886, #2236, .T. ) ; +#10428 = CARTESIAN_POINT ( 'NONE', ( 2.607689557855039600, -21.07519391102438500, 9.688852381185565600 ) ) ; +#10429 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -90.07596123493895800, -4.350951650170483900 ) ) ; +#10430 = CARTESIAN_POINT ( 'NONE', ( 6.007316358893008100, -29.49684770515648700, 25.24454616918602300 ) ) ; +#10431 = CARTESIAN_POINT ( 'NONE', ( 33.33417769364115200, -23.36627099705986100, 13.77551396815082000 ) ) ; +#10432 = CARTESIAN_POINT ( 'NONE', ( 5.939855271188671200, -10.00000000000000200, -23.52106732301307100 ) ) ; +#10433 = CARTESIAN_POINT ( 'NONE', ( 11.56458493523695500, -97.50042270749531800, 21.44461698310063000 ) ) ; +#10434 = CARTESIAN_POINT ( 'NONE', ( 0.1244080298464615700, -10.00000000000000400, -13.97421303432720500 ) ) ; +#10435 = AXIS2_PLACEMENT_3D ( 'NONE', #1007, #6560, #12159 ) ; +#10436 = CARTESIAN_POINT ( 'NONE', ( 3.824838590093690500, -28.98200853403166000, 22.61918169347546500 ) ) ; +#10437 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1838, #11788, #2939, #10781, #4049, #11888, #5163, #13003, #6290, #14101 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979364600, 0.002130928723958729200, 0.003196393085938093900, 0.004261857447917458300 ), + .UNSPECIFIED. ) ; +#10438 = ORIENTED_EDGE ( 'NONE', *, *, #9041, .F. ) ; +#10439 = CARTESIAN_POINT ( 'NONE', ( 31.25240470402358600, -30.97570367575711700, 26.93646163942591100 ) ) ; +#10440 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10441 = CARTESIAN_POINT ( 'NONE', ( 7.486333539723496200, -30.89385971294695200, 26.30188611923367100 ) ) ; +#10442 = CARTESIAN_POINT ( 'NONE', ( 36.92034705632976000, -30.37093366238794800, 21.79038519144019400 ) ) ; +#10443 = CARTESIAN_POINT ( 'NONE', ( 22.55794980690656400, -33.35025653084936400, 26.50741664928542500 ) ) ; +#10444 = EDGE_CURVE ( 'NONE', #7419, #7788, #13734, .T. ) ; +#10445 = CARTESIAN_POINT ( 'NONE', ( 4.676823003111349100, -30.99651511830145300, 23.54248362164923900 ) ) ; +#10446 = CARTESIAN_POINT ( 'NONE', ( 5.474808194957755200, -94.72210163403924800, 15.44587895064602300 ) ) ; +#10447 = CARTESIAN_POINT ( 'NONE', ( 9.857834225750318400, -11.37367492606410700, -24.99999999999821300 ) ) ; +#10448 = CIRCLE ( 'NONE', #4251, 3.189999999999995100 ) ; +#10449 = CARTESIAN_POINT ( 'NONE', ( 25.22280079391836000, -16.78701840052780300, -26.19673446257781500 ) ) ; +#10450 = CARTESIAN_POINT ( 'NONE', ( 7.084155368373519200, -31.01856920662548900, 26.21773775362001400 ) ) ; +#10451 = CARTESIAN_POINT ( 'NONE', ( 23.22925425155827000, -12.49999999999999100, -14.43771422657021100 ) ) ; +#10452 = CARTESIAN_POINT ( 'NONE', ( 24.61978950636116200, -19.18726530954283400, 23.26705117419675900 ) ) ; +#10453 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#10454 = VERTEX_POINT ( 'NONE', #3585 ) ; +#10455 = AXIS2_PLACEMENT_3D ( 'NONE', #9163, #2457, #10283 ) ; +#10456 = CARTESIAN_POINT ( 'NONE', ( 33.65387643109922100, -12.49999999999871700, 15.29978662259141600 ) ) ; +#10457 = CARTESIAN_POINT ( 'NONE', ( 33.17006952792808500, -31.15076477018832100, 25.66177075635727800 ) ) ; +#10458 = CARTESIAN_POINT ( 'NONE', ( 11.16287925375509400, -30.81023863598675700, 27.91068027704247700 ) ) ; +#10459 = CARTESIAN_POINT ( 'NONE', ( 17.23348364890947700, -19.43684316291222200, 23.35252555600577300 ) ) ; +#10460 = CARTESIAN_POINT ( 'NONE', ( 5.155635229516025000, -22.22189858955289300, -13.96482680855441300 ) ) ; +#10461 = CARTESIAN_POINT ( 'NONE', ( 34.89996284917145200, -22.27381909526922900, -13.59398020296540600 ) ) ; +#10462 = CARTESIAN_POINT ( 'NONE', ( 33.39966207373295500, -21.65134362888694500, -18.05891040074613900 ) ) ; +#10463 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3086, #9791, #5303, #13142, #6434, #14239, #7570, #923, #8712, #2024 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2500000000000000000, 0.5000000000000000000, 0.7500000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#10464 = FACE_BOUND ( 'NONE', #14244, .T. ) ; +#10465 = CARTESIAN_POINT ( 'NONE', ( 31.05336076518040400, -94.71799171676336500, 17.16806718887030700 ) ) ; +#10466 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457636700, -30.82655086342985500, 27.93782961424069800 ) ) ; +#10467 = CARTESIAN_POINT ( 'NONE', ( 37.79832408375489900, -18.80829772770284000, -11.64674924292258500 ) ) ; +#10468 = EDGE_CURVE ( 'NONE', #10169, #2583, #4149, .T. ) ; +#10469 = LOCAL_TIME ( 15, 9, 47.00000000000000000, #10645 ) ; +#10470 = CARTESIAN_POINT ( 'NONE', ( 33.45103303036721300, -19.91637485562016600, 18.44118518745840200 ) ) ; +#10471 = ORIENTED_EDGE ( 'NONE', *, *, #5203, .T. ) ; +#10472 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000900, 17.50000000000000400 ) ) ; +#10473 = CARTESIAN_POINT ( 'NONE', ( 12.10593395833187500, -11.48458451629265100, 24.54482665958672500 ) ) ; +#10474 = CARTESIAN_POINT ( 'NONE', ( 9.329064778056588700, -30.64916707784288300, 27.28905690297189300 ) ) ; +#10475 = CARTESIAN_POINT ( 'NONE', ( 35.16768210184679300, -29.19944816994078000, 24.05200464035090500 ) ) ; +#10476 = CARTESIAN_POINT ( 'NONE', ( 17.68719383516401000, -30.65917406624153300, 28.85723021296909300 ) ) ; +#10477 = ADVANCED_FACE ( 'NONE', ( #4488 ), #7931, .T. ) ; +#10478 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000900, 17.50000000000000400 ) ) ; +#10479 = CARTESIAN_POINT ( 'NONE', ( 36.95009588568307600, -92.77293695754218600, 2.147981999194825700 ) ) ; +#10480 = CARTESIAN_POINT ( 'NONE', ( 6.064630737615837000, -30.54578373637208700, 25.52850156315653200 ) ) ; +#10481 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -22.51392446468638700, 7.665448506694613000 ) ) ; +#10482 = CARTESIAN_POINT ( 'NONE', ( 10.23540518250737100, -23.91179852139231300, 17.67827172604651400 ) ) ; +#10483 = CARTESIAN_POINT ( 'NONE', ( 8.244019918404431400, -10.00000000000000000, -27.26713276568625900 ) ) ; +#10484 = CARTESIAN_POINT ( 'NONE', ( 15.77428123341881300, -19.94198041340479200, 23.15146038291032600 ) ) ; +#10485 = CARTESIAN_POINT ( 'NONE', ( 5.876470005292832300, -20.27601653518508200, -21.26476011218272100 ) ) ; +#10486 = EDGE_LOOP ( 'NONE', ( #10383, #12506, #9115, #8299 ) ) ; +#10487 = CARTESIAN_POINT ( 'NONE', ( 3.335884128047649000, -30.38182879005646000, 22.59111757873863600 ) ) ; +#10488 = CARTESIAN_POINT ( 'NONE', ( 31.05707637770446900, -30.38713723389755500, 27.13552140486508800 ) ) ; +#10489 = CARTESIAN_POINT ( 'NONE', ( 5.400184166952030300, -18.57849786460484200, -21.27795695462696900 ) ) ; +#10490 = CARTESIAN_POINT ( 'NONE', ( 7.486337192920916400, -30.20381080576158400, 26.42357364232233500 ) ) ; +#10491 = CARTESIAN_POINT ( 'NONE', ( 36.40709883577719800, -28.95670028389037800, 22.21379308721410300 ) ) ; +#10492 = VERTEX_POINT ( 'NONE', #11474 ) ; +#10493 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.734723475976807100E-016 ) ) ; +#10494 = CARTESIAN_POINT ( 'NONE', ( 4.189902698190767400, -30.10014805943998100, 24.08892707015176900 ) ) ; +#10495 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000000, 12.00000000000000000, 20.00000000000000000 ) ) ; +#10496 = ORIENTED_EDGE ( 'NONE', *, *, #1525, .T. ) ; +#10497 = CARTESIAN_POINT ( 'NONE', ( 9.781285771409868000, -12.68774362112989400, -25.08707456830839200 ) ) ; +#10498 = CARTESIAN_POINT ( 'NONE', ( 17.62479190845341000, -31.29794767388153400, 28.74459719137768200 ) ) ; +#10499 = CARTESIAN_POINT ( 'NONE', ( 27.52166898434758100, -20.81191745006319800, -26.17128994532351900 ) ) ; +#10500 = CARTESIAN_POINT ( 'NONE', ( 4.180880968196354400, -28.72579692247222400, 22.38450868785946200 ) ) ; +#10501 = CARTESIAN_POINT ( 'NONE', ( 25.73722543961773800, -20.82305307089604400, -23.97449549288616700 ) ) ; +#10502 = CARTESIAN_POINT ( 'NONE', ( 34.91305994491558100, -19.02636035098433000, 16.94134121746175800 ) ) ; +#10503 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10730, #3958, #11842, #5117, #12954, #6245, #14054, #7378, #745, #8527, #1848, #9654, #2947, #10790, #4059, #11896, #5172, #13012, #6300, #14108, #7439, #800, #8584, #1899 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -5.999999999844471000E-008, 0.0006880429692561774200, 0.001376145938512353400, 0.002752351877024708600, 0.004128557815537063800, 0.005504763754049418600, 0.008257175631074130700, 0.01100958750809884200, 0.01376199938512355200, 0.01651441126214826100, 0.01926682313917298800, 0.02201923501619771500 ), + .UNSPECIFIED. ) ; +#10504 = ORIENTED_EDGE ( 'NONE', *, *, #9061, .T. ) ; +#10505 = CARTESIAN_POINT ( 'NONE', ( 24.73062398275887500, -12.50000000000002100, 8.729037643098477500 ) ) ; +#10506 = CARTESIAN_POINT ( 'NONE', ( 33.09233716229515200, -30.21443082695206800, 26.10797160935630900 ) ) ; +#10507 = CARTESIAN_POINT ( 'NONE', ( 3.485656216324997100, -29.89055330658842600, 11.82621063157154100 ) ) ; +#10508 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000700, 27.93780948130459400 ) ) ; +#10509 = CARTESIAN_POINT ( 'NONE', ( 39.90287534330132500, 10.19006527892302000, 17.14065433413488300 ) ) ; +#10510 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000018700, -12.49999999999999500, -11.97268808056956100 ) ) ; +#10511 = CARTESIAN_POINT ( 'NONE', ( 28.76930942611217600, -20.99791101827984400, -22.73019582282974200 ) ) ; +#10512 = CARTESIAN_POINT ( 'NONE', ( 32.02447226351931400, -12.50000000000000000, -18.56203464903769900 ) ) ; +#10513 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 3, ( + ( #7600, #5377, #13215, #6506 ), + ( #14306, #7646, #1000, #8786 ), + ( #2090, #9916, #3201, #11042 ), + ( #4317, #12151, #5416, #13259 ), + ( #6551, #14350, #7690, #1043 ), + ( #8833, #2131, #9953, #3242 ), + ( #11084, #4359, #12193, #5464 ), + ( #13300, #6596, #14393, #7737 ), + ( #1085, #8877, #2177, #9997 ), + ( #3284, #11131, #4401, #12234 ), + ( #5505, #13346, #6641, #48 ), + ( #7787, #1133, #8920, #2222 ), + ( #10042, #3330, #11180, #4453 ), + ( #12278, #5556, #13385, #6692 ), + ( #92, #7832, #1185, #8968 ), + ( #2268, #10096, #3378, #11223 ), + ( #4494, #12329, #5604, #13431 ), + ( #6738, #142, #7878, #1227 ), + ( #9016, #2314, #10141, #3428 ), + ( #11269, #4541, #12370, #5655 ), + ( #13474, #6784, #185, #7923 ), + ( #1265, #9062, #2363, #10187 ), + ( #3470, #11318, #4584, #12416 ), + ( #5701, #13521, #6825, #221 ), + ( #7971, #1307, #9106, #2402 ), + ( #10231, #3514, #11360, #4631 ), + ( #12463, #5749, #13560, #6878 ), + ( #268, #8019, #1361, #9151 ), + ( #2446, #10276, #3566, #11406 ), + ( #4675, #12517, #5802, #13609 ), + ( #6924, #317, #8070, #1407 ), + ( #9204, #2501, #10317, #3612 ), + ( #11457, #4720, #12557, #5852 ), + ( #13659, #6972, #363, #8122 ), + ( #1452, #9250, #2549, #10365 ), + ( #3656, #11503, #4770, #12602 ), + ( #5896, #13710, #7025, #409 ), + ( #8173, #1508, #9296, #2596 ), + ( #10420, #3709, #11553, #4814 ), + ( #12651, #5945, #13754, #7074 ), + ( #455, #8224, #1552, #9348 ), + ( #2640, #10470, #3758, #11598 ), + ( #4862, #12702, #5997, #13800 ), + ( #7121, #509, #8272, #1597 ), + ( #9393, #2691, #10519, #3804 ), + ( #11644, #4904, #12746, #6042 ), + ( #13849, #7166, #550, #8323 ), + ( #1641, #9436, #2739, #10573 ), + ( #3849, #11691, #4955, #12794 ), + ( #6082, #13893, #7213, #589 ), + ( #8367, #1688, #9487, #2783 ), + ( #10623, #3901, #11737, #5003 ), + ( #12850, #6132, #13941, #7262 ), + ( #639, #8415, #1732, #9542 ), + ( #2826, #10668, #3952, #11786 ), + ( #5054, #12895, #6184, #13990 ), + ( #7311, #685, #8463, #1780 ), + ( #9586, #2882, #10719, #3994 ), + ( #11833, #5106, #12942, #6233 ), + ( #14043, #7365, #734, #8517 ), + ( #1834, #9643, #2935, #10778 ), + ( #4046, #11885, #5160, #12999 ), + ( #6286, #14097, #7428, #788 ), + ( #8571, #1889, #9701, #2989 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 4 ), + ( 4, 4 ), + ( -0.0002931808117968638700, -0.0001381055449439844300, -6.056791151754473000E-005, -2.179909480432487800E-005, -2.414686447714952100E-006, 1.696972190889497400E-005, 0.0003271202556146538200, 0.0009474213230261715100, 0.002188023457849206800, 0.004669227727495277300, 0.007150431997141348300, 0.009631636266787419300, 0.01459404480607956100, 0.01707524907572563100, 0.01955645334537170100, 0.02451886188466384500, 0.02700006615430991500, 0.02948127042395598500, 0.03196247469360205500, 0.03444367896324812600, 0.03692488323289419600, 0.03940608750254026600 ), + ( 0.0000000000000000000, 1.006679916914063700 ), + .UNSPECIFIED. ) ; +#10514 = ORIENTED_EDGE ( 'NONE', *, *, #6150, .F. ) ; +#10515 = EDGE_CURVE ( 'NONE', #12814, #1799, #12052, .T. ) ; +#10516 = CARTESIAN_POINT ( 'NONE', ( 35.06601571360486200, -95.07596123493894400, 12.88244847305890600 ) ) ; +#10517 = CARTESIAN_POINT ( 'NONE', ( 31.10214152312985900, -30.28545414000306500, 27.10790303063814500 ) ) ; +#10518 = CARTESIAN_POINT ( 'NONE', ( 6.245297715500232300, -99.99999999999998600, -31.23924336750123800 ) ) ; +#10519 = CARTESIAN_POINT ( 'NONE', ( 31.66786347105883700, -19.46644012397199200, 20.22538093464596900 ) ) ; +#10520 = ORIENTED_EDGE ( 'NONE', *, *, #8288, .T. ) ; +#10521 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991100, -97.53409883939579600, 14.05316308284064400 ) ) ; +#10522 = CARTESIAN_POINT ( 'NONE', ( 37.49852012045717900, -21.20981386899575600, 8.032374022674906300 ) ) ; +#10523 = CARTESIAN_POINT ( 'NONE', ( 9.638612486746577400, -30.98144312853149500, 27.33234541803517800 ) ) ; +#10524 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11820, #12028, #8711 ), + ( #2023, #9835, #3129 ), + ( #10980, #4242, #12075 ), + ( #5349, #13189, #6480 ), + ( #6505, #282, #8032 ), + ( #1373, #9168, #2462 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 4 ), + ( 3, 3 ), + ( 0.02063403140189299200, 0.02167161455191212600, 0.02270919770193126400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9887332271578431800, 1.000000000000000000), + ( 1.000000000000000000, 0.9871833546783220800, 1.000000000000000000), + ( 1.000000000000000000, 0.9836708456349795300, 1.000000000000000000), + ( 1.000000000000000000, 0.9748390238567777900, 1.000000000000000000), + ( 1.000000000000000000, 0.9695491355203916800, 1.000000000000000000), + ( 1.000000000000000000, 0.9636507673744034700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10525 = CARTESIAN_POINT ( 'NONE', ( 35.62660034995487000, -30.13678885759142600, 24.28990753260844900 ) ) ; +#10526 = CARTESIAN_POINT ( 'NONE', ( 39.90291286365119600, 10.18993461597465900, -17.13949627301116900 ) ) ; +#10527 = CARTESIAN_POINT ( 'NONE', ( 36.24309991433508300, -97.42196504633042800, 18.37393771275848300 ) ) ; +#10528 = ORIENTED_EDGE ( 'NONE', *, *, #8713, .T. ) ; +#10529 = DIRECTION ( 'NONE', ( -5.327447116441166800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#10530 = CARTESIAN_POINT ( 'NONE', ( 34.33099240395542000, -7.561019679549343000, 25.00000000000000000 ) ) ; +#10531 = CARTESIAN_POINT ( 'NONE', ( 6.227225813974401400, -29.62297117298445700, 25.47074773725001500 ) ) ; +#10532 = CARTESIAN_POINT ( 'NONE', ( 39.99998310103648400, -10.00000000000000200, 7.855827447146114500 ) ) ; +#10533 = CARTESIAN_POINT ( 'NONE', ( 9.688736760208051600, -12.49999999999990100, 19.33227303144721200 ) ) ; +#10534 = CARTESIAN_POINT ( 'NONE', ( 26.37675003751881800, -14.46566888762966800, -25.78741791179943700 ) ) ; +#10535 = CARTESIAN_POINT ( 'NONE', ( 2.117525709379605400, -11.91741274050320800, -18.95475523009079000 ) ) ; +#10536 = CARTESIAN_POINT ( 'NONE', ( 22.43341394282828500, -19.89042152305432200, 23.25607442728516700 ) ) ; +#10537 = ORIENTED_EDGE ( 'NONE', *, *, #3856, .F. ) ; +#10538 = EDGE_CURVE ( 'NONE', #12911, #2787, #13543, .T. ) ; +#10539 = CARTESIAN_POINT ( 'NONE', ( 0.4734017680488217300, -11.89368809817152200, 7.987098296031501100 ) ) ; +#10540 = CARTESIAN_POINT ( 'NONE', ( 31.06782321645560100, -30.80116598493543700, 27.08704149403004300 ) ) ; +#10541 = CARTESIAN_POINT ( 'NONE', ( 7.898075140378550100, -31.09058421513563500, 26.42391199035838800 ) ) ; +#10542 = CARTESIAN_POINT ( 'NONE', ( 37.30677394791996400, -30.01527250606511600, 22.00415227705190100 ) ) ; +#10543 = EDGE_LOOP ( 'NONE', ( #5461, #9086, #11556, #8277 ) ) ; +#10544 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.511547099454124200, 20.00000000000000000 ) ) ; +#10545 = AXIS2_PLACEMENT_3D ( 'NONE', #14151, #7479, #840 ) ; +#10546 = CARTESIAN_POINT ( 'NONE', ( 4.677928693033879700, -29.16225818566375600, 23.86505613472769800 ) ) ; +#10547 = CARTESIAN_POINT ( 'NONE', ( 39.88358792782444300, -10.46564996122375900, -12.76133817479109900 ) ) ; +#10548 = CARTESIAN_POINT ( 'NONE', ( 38.50832441620210700, -11.79051571228106900, -17.55591867961841500 ) ) ; +#10549 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10550 = ORIENTED_EDGE ( 'NONE', *, *, #6070, .T. ) ; +#10551 = CARTESIAN_POINT ( 'NONE', ( 37.67355761873126600, -12.51930356225555800, -19.06581063114711600 ) ) ; +#10552 = FACE_OUTER_BOUND ( 'NONE', #14293, .T. ) ; +#10553 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000900, 20.69000000000000100 ) ) ; +#10554 = CARTESIAN_POINT ( 'NONE', ( 23.17029303122967900, -21.96703350611751700, -27.11011088902209200 ) ) ; +#10555 = ADVANCED_FACE ( 'NONE', ( #11340 ), #8732, .T. ) ; +#10556 = CARTESIAN_POINT ( 'NONE', ( 22.57347623597518500, -19.89847195717275200, 23.25457145115144200 ) ) ; +#10557 = CARTESIAN_POINT ( 'NONE', ( 24.54624171957035400, -12.49999999999962500, -22.77258575614168400 ) ) ; +#10558 = CARTESIAN_POINT ( 'NONE', ( 34.01462454385976000, -23.17394066566812300, 12.40037997394021800 ) ) ; +#10559 = EDGE_CURVE ( 'NONE', #7302, #12274, #3195, .T. ) ; +#10560 = CARTESIAN_POINT ( 'NONE', ( 33.05933768786711400, -30.93290607969069600, 25.92984752979982200 ) ) ; +#10561 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -27.36074002518120500, 8.074055433625101600 ) ) ; +#10562 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000300, 27.93780948130459100 ) ) ; +#10563 = CARTESIAN_POINT ( 'NONE', ( 29.23497194082369100, -22.33543039809020700, -25.56277828500480400 ) ) ; +#10564 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10565 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10566 = LINE ( 'NONE', #4927, #9497 ) ; +#10567 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 1, 3, ( + ( #5537, #843, #13370, #6671, #75, #7815, #1167, #8951, #2251, #10078, #3356, #11204, #4477, #12310, #5585, #13413, #6720, #122 ), + ( #7858, #1210, #9000, #2298, #10123, #3410, #11251, #4522, #12355, #5636, #13457, #6767, #169, #7906, #1249, #9044, #2343, #10170 ), + ( #3453, #11300, #4565, #12399, #5683, #13502, #6809, #208, #7957, #1290, #9088, #2389, #10217, #3497, #11341, #4615, #12443, #5730 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 2, 1, 2 ), + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -0.01000000000000000000, 0.0000000000000000000, 1.000000000000000000 ), + ( 1.570796326794896800, 1.776963344686727000, 1.983130362578557000, 2.189297380470387500, 2.395464398362217500, 2.601631416254047500, 2.807798434145877500, 3.013965452037707500, 3.220132469929537900 ), + .UNSPECIFIED. ) ; +#10568 = ORIENTED_EDGE ( 'NONE', *, *, #11501, .F. ) ; +#10569 = LINE ( 'NONE', #7488, #10373 ) ; +#10570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#10571 = CARTESIAN_POINT ( 'NONE', ( 33.24716844556427700, -29.69872603944515900, 25.84184580667914900 ) ) ; +#10572 = CARTESIAN_POINT ( 'NONE', ( 14.21012092569722000, -99.99999999999998600, -37.94977236663728300 ) ) ; +#10573 = CARTESIAN_POINT ( 'NONE', ( 30.01060955771224000, -19.13236944898842000, 21.41213372018669500 ) ) ; +#10574 = ORIENTED_EDGE ( 'NONE', *, *, #7890, .F. ) ; +#10575 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -1.200000000000012800 ) ) ; +#10576 = CARTESIAN_POINT ( 'NONE', ( 36.87807201649845700, -20.86120765313172500, 12.28277856540345200 ) ) ; +#10577 = CARTESIAN_POINT ( 'NONE', ( 9.630183424507372100, -30.74173142102606000, 27.39671173044786900 ) ) ; +#10578 = CARTESIAN_POINT ( 'NONE', ( 35.16874599534425300, -31.02544367143947200, 23.73097263403795100 ) ) ; +#10579 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -95.07596123493894400, 11.50239124669685300 ) ) ; +#10580 = CARTESIAN_POINT ( 'NONE', ( 28.21800449616546700, -94.74158487160750000, 18.02139609884010700 ) ) ; +#10581 = VECTOR ( 'NONE', #5263, 1000.000000000000000 ) ; +#10582 = ORIENTED_EDGE ( 'NONE', *, *, #2376, .T. ) ; +#10583 = CARTESIAN_POINT ( 'NONE', ( 22.56123850041398900, -19.88642326305406600, 23.25678856832246000 ) ) ; +#10584 = CARTESIAN_POINT ( 'NONE', ( 4.698678965879222100, -22.07892471847370800, 15.58833429148744500 ) ) ; +#10585 = CARTESIAN_POINT ( 'NONE', ( 31.00600567946578300, -9.832644042917831200, 25.00000000000000400 ) ) ; +#10586 = CARTESIAN_POINT ( 'NONE', ( 6.215683769021180400, -30.85900702568504200, 25.45434459600484800 ) ) ; +#10587 = CARTESIAN_POINT ( 'NONE', ( 41.95195977589116900, -10.00000000000000000, 7.989792642218486000 ) ) ; +#10588 = CARTESIAN_POINT ( 'NONE', ( 16.26970157573756700, -12.49999999999999800, 9.808418183839188800 ) ) ; +#10589 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 18.70000000000001400 ) ) ; +#10590 = CARTESIAN_POINT ( 'NONE', ( 39.90287534330131800, 10.19006527892301300, -0.3593456658651217300 ) ) ; +#10591 = ORIENTED_EDGE ( 'NONE', *, *, #2775, .F. ) ; +#10592 = CARTESIAN_POINT ( 'NONE', ( -1.948390297519350100, -10.00000000000001100, 8.385018546978539400 ) ) ; +#10593 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 3, ( + ( #6381, #8707, #3125, #10976, #4236, #12071, #5344, #13183, #6474, #14274, #7612, #962, #8750, #2058, #9878, #3168, #11012, #4288, #12114, #5386, #13226, #6518, #14316, #7654, #1010, #3302, #11153, #4425, #12256, #5528 ), + ( #13362, #6663, #68, #7807, #1158, #8942, #2242, #10068, #3349, #11196, #4471, #12302, #5578, #13405, #6714, #114, #7852, #1204, #8991, #2289, #10117, #3401, #11243, #4515, #12348, #5628, #13449, #6757, #163, #7898 ), + ( #1241, #9036, #2335, #10160, #3444, #11292, #4558, #12391, #5677, #13495, #6802, #203, #7949, #1284, #9081, #2383, #10209, #3489, #11335, #4607, #12436, #5722, #13538, #6850, #239, #7991, #1331, #9127, #2421, #10253 ), + ( #3536, #11378, #4647, #12487, #5771, #13581, #6895, #290, #8038, #1378, #9174, #2467, #10289, #3586, #11425, #4691, #12533, #5821, #13627, #6941, #335, #8089, #1422, #9221, #2520, #10334, #3626, #11475, #4738, #12576 ), + ( #5867, #13682, #6991, #382, #8142, #1476, #9270, #2570, #10387, #3677, #11524, #4791, #12621, #5914, #13727, #7048, #427, #8193, #1528, #9319, #2614, #10442, #3731, #11571, #4832, #12675, #5967, #13773, #7093, #480 ), + ( #8244, #1569, #9367, #2662, #10491, #3779, #11619, #4881, #12720, #6019, #13824, #7143, #529, #8297, #1616, #9412, #2717, #10542, #3824, #11666, #4926, #12769, #6059, #13870, #7188, #569, #8342, #1664, #9458, #2758 ), + ( #10597, #3875, #11713, #4978, #12819, #6105, #13910, #7237, #610, #8388, #1708, #9513, #2804, #10643, #3924, #11760, #5025, #12871, #6156, #13963, #7280, #657, #8435, #1752, #9561, #2852, #10688, #3967, #11804, #5077 ), + ( #12916, #6211, #14014, #7335, #707, #8487, #1805, #9614, #2908, #10748, #4018, #11856, #5131, #12968, #6258, #14070, #7396, #758, #8538, #1861, #9669, #2963, #10804, #4075, #11910, #5185, #13025, #6313, #14125, #7455 ), + ( #817, #8599, #1911, #9726, #3016, #10863, #4128, #11967, #5238, #13077, #6370, #14177, #7508, #869, #8652, #1963, #9776, #3070, #10914, #4181, #12017, #5289, #13130, #6421, #14225, #7555, #910, #8702, #2009, #9822 ), + ( #3118, #10968, #4228, #12063, #5339, #13178, #6468, #14269, #7604, #955, #8744, #2054, #9872, #3162, #11009, #4281, #12108, #5381, #13221, #6512, #14311, #7650, #1004, #8790, #2094, #9921, #3207, #11047, #4321, #12155 ), + ( #5420, #13263, #6556, #14356, #7695, #1047, #8837, #2135, #9957, #3247, #11090, #4364, #12197, #5468, #13304, #6600, #4, #7743, #1090, #8881, #2181, #10001, #3288, #11136, #4407, #12238, #5509, #13349, #6644, #52 ), + ( #7792, #1139, #8926, #2226, #10046, #3334, #11183, #4458, #12284, #5561, #13389, #6696, #96, #7837, #1190, #8974, #2273, #10100, #3381, #11227, #4498, #12334, #5610, #13436, #6742, #146, #7882, #1231, #9021, #2320 ), + ( #10146, #3432, #11273, #4545, #12374, #5661, #13479, #6788, #188, #7926, #1268, #9065, #2366, #10191, #3474, #11321, #4586, #12419, #5704, #13524, #6830, #225, #7974, #1310, #9109, #2405, #10235, #3520, #11363, #4635 ), + ( #12467, #5753, #13563, #6881, #274, #8024, #1365, #9154, #2451, #10278, #3570, #11410, #4679, #12520, #5806, #13613, #6928, #321, #8076, #1413, #9208, #2504, #10320, #3615, #11461, #4725, #12562, #5856, #13663, #6976 ), + ( #368, #8126, #1458, #9255, #2553, #10369, #3660, #11507, #4775, #12607, #5901, #13715, #7029, #412, #8176, #1512, #9302, #2600, #10424, #3712, #11555, #4818, #12656, #5950, #13758, #7077, #459, #8228, #1556, #9352 ), + ( #2644, #10475, #3762, #11602, #4865, #12705, #6001, #13805, #7126, #512, #8275, #1600, #9396, #2696, #10525, #3809, #11648, #4908, #12750, #6045, #13853, #7171, #554, #8327, #1644, #9439, #2742, #10578, #3854, #11696 ), + ( #4959, #12798, #6086, #13897, #7218, #593, #8372, #1691, #9492, #2786, #10627, #3906, #11743, #5008, #12853, #6136, #13946, #7267, #644, #8420, #1737, #9546, #2830, #10672, #3955, #11790, #5059, #12900, #6190, #13995 ), + ( #7316, #690, #8469, #1786, #9592, #2887, #10723, #3997, #11836, #5112, #12946, #6239, #14047, #7370, #739, #8521, #1840, #9649, #2941, #10783, #4052, #11890, #5165, #13005, #6292, #14103, #7432, #793, #8576, #1894 ), + ( #9706, #2996, #10840, #4107, #11944, #5218, #13057, #6349, #14159, #7486, #847, #8629, #1944, #9759, #3049, #10894, #4158, #11998, #5266, #13108, #6402, #14207, #7536, #891, #8683, #1987, #9804, #3102, #10944, #4210 ), + ( #12044, #5319, #13157, #6448, #14250, #7583, #938, #8724, #2038, #9849, #3142, #10993, #4259, #12089, #5363, #13203, #6492, #14292, #7631, #980, #8770, #2077, #9899, #3183, #11028, #4304, #12135, #5401, #13245, #6537 ), + ( #14335, #7674, #1029, #8815, #2115, #9938, #3227, #11068, #4345, #12180, #5445, #13285, #6580, #14378, #7719, #1072, #8861, #2160, #9980, #3267, #11114, #4387, #12218, #5492, #13331, #6624, #31, #7773, #1116, #8906 ), + ( #2210, #10026, #3314, #11163, #4436, #12265, #5540, #13372, #6674, #79, #7817, #1169, #8953, #2254, #10080, #3362, #11208, #4480, #12314, #5588, #13417, #6725, #126, #7863, #1214, #9003, #2301, #10128, #3413, #11255 ), + ( #4527, #12358, #5639, #13461, #6771, #173, #7911, #1253, #9047, #2347, #10173, #3456, #11304, #4570, #12402, #5687, #13505, #6813, #212, #7960, #1293, #9092, #2392, #10219, #3500, #11345, #4618, #12447, #5733, #13547 ), + ( #6862, #252, #8005, #1347, #9138, #2433, #10265, #3552, #11392, #4661, #12502, #5786, #13595, #6911, #304, #8055, #1393, #982, #8773, #2079, #9902, #3186, #11032, #4306, #12137, #5403, #13248, #6540, #14339, #7677 ), + ( #1032, #8817, #2117, #9940, #3231, #11071, #4349, #12182, #5448, #13287, #6583, #14380, #7723, #1075, #8863, #2162, #9983, #3269, #11118, #4390, #12222, #5494, #13333, #6626, #33, #7775, #1120, #8909, #2212, #10028 ), + ( #3316, #11165, #4440, #12268, #5543, #13374, #6677, #81, #7819, #1172, #8957, #2257, #10083, #3364, #11211, #4482, #12317, #5591, #13421, #6727, #129, #7865, #1216, #9006, #2304, #10131, #3416, #11257, #4529, #12360 ), + ( #5643, #13464, #6774, #175, #7914, #1255, #9050, #2350, #10177, #3459, #11307, #4572, #12405, #5689, #13508, #6816, #214, #7962, #1296, #9094, #2395, #10222, #3503, #11348, #4621, #12449, #5736, #13549, #6866, #255 ), + ( #8009, #1349, #9141, #2435, #10267, #3555, #11396, #4664, #12505, #5789, #13598, #6913, #307, #8058, #1396, #9193, #2488, #10304, #3602, #11447, #4708, #12546, #5840, #13646, #6959, #352, #8109, #1440, #9238, #2536 ), + ( #10353, #3644, #11491, #4758, #12593, #5885, #13699, #7011, #397, #8161, #1495, #9286, #2586, #10406, #3695, #11540, #4805, #12640, #5932, #13742, #7063, #442, #8212, #1542, #9335, #2630, #10457, #3745, #11585, #4848 ), + ( #12689, #5983, #13788, #7109, #496, #8258, #1583, #9381, #2677, #10506, #3792, #11633, #4893, #12735, #6032, #13839, #7157, #541, #8312, #1629, #9425, #2730, #10560, #3838, #11680, #4944, #12784, #6074, #13884, #7201 ), + ( #581, #8356, #1679, #9474, #2776, #10613, #3892, #11728, #4994, #12838, #6122, #13930, #7253, #629, #8405, #1722, #9531, #2816, #10660, #3941, #11775, #5042, #12886, #6173, #13981, #7300, #676, #8453, #1770, #9575 ), + ( #2871, #10706, #3984, #11822, #5096, #12933, #6224, #14035, #7354, #726, #8508, #1824, #9633, #2926, #10768, #4034, #11876, #5150, #12988, #6276, #14088, #7417, #777, #8560, #1880, #9690, #2980, #10824, #4094, #11928 ), + ( #5204, #13045, #6333, #14143, #7472, #833, #8616, #1928, #9745, #3033, #10879, #4143, #11983, #5253, #13094, #6388, #14195, #7523, #881, #8668, #1975, #9792, #3087, #10930, #4197, #12030, #5304, #13143, #6436, #14240 ), + ( #7572, #924, #8714, #2025, #9837, #3130, #10982, #4245, #12077, #5350, #13191, #6481, #14280, #7619, #968, #8756, #2066, #9885, #3174, #11020, #4295, #12121, #5390, #13232, #6524, #14323, #7660, #1017, #8804, #2105 ), + ( #9932, #3217, #11058, #4333, #12169, #5432, #13274, #6569, #14366, #7707, #1057, #8849, #2146, #9968, #3256, #11102, #4376, #12207, #5481, #13319, #6612, #19, #7758, #1102, #8892, #2197, #10012, #3299, #11150, #4423 ), + ( #12254, #5524, #13359, #6660, #65, #7804, #1155, #8939, #2238, #10064, #3347, #11194, #4469, #12299, #5575, #13401, #6711, #111, #7849, #1201, #8987, #2286, #10113, #3398, #11240, #4512, #12345, #5626, #13447, #6754 ), + ( #161, #7894, #1238, #9033, #2332, #10158, #3442, #11289, #4555, #12388, #5674, #13493, #6799, #200, #7946, #1281, #9079, #2380, #10206, #3486, #11332, #4604, #12433, #5719, #13535, #6847, #236, #7988, #1328, #9124 ), + ( #2418, #10250, #3534, #11376, #4645, #12485, #5769, #13579, #6893, #288, #8036, #1376, #9172, #2466, #10288, #3584, #11423, #4689, #12532, #5819, #13625, #6939, #333, #8087, #1420, #9219, #2518, #10333, #3625, #11473 ), + ( #4735, #12573, #5864, #13679, #6988, #378, #8139, #1473, #9267, #2567, #10384, #3674, #11521, #4789, #12619, #5912, #13725, #7045, #424, #8191, #1526, #9316, #2611, #10439, #3728, #11568, #4829, #12671, #5964, #13770 ), + ( #7090, #476, #8242, #1567, #9364, #2659, #10488, #3776, #11615, #4878, #12717, #6016, #13821, #7140, #526, #8293, #1613, #9410, #2714, #10540, #3821, #11663, #4923, #12767, #6057, #13867, #7186, #566, #8340, #1660 ), + ( #9455, #2755, #10594, #3872, #11710, #4975, #12815, #6102, #13907, #7234, #607, #8384, #1705, #9509, #2801, #10640, #3921, #11757, #5022, #12868, #6152, #13960, #7277, #654, #8432, #1749, #9558, #2848, #10685, #3964 ), + ( #11801, #5074, #12913, #6207, #14011, #7332, #704, #8484, #1802, #9611, #2905, #10744, #4015, #11853, #5127, #12965, #6255, #14067, #7392, #755, #8535, #1858, #9666, #2960, #10801, #4070, #11907, #5182, #13022, #6310 ), + ( #14122, #7452, #813, #8596, #1908, #9723, #3013, #10860, #4125, #11964, #5235, #13074, #6367, #14174, #7505, #866, #8648, #1959, #9773, #3067, #10911, #4178, #12014, #5285, #13128, #6419, #14223, #7552, #906, #8700 ), + ( #2005, #9820, #3115, #10965, #4226, #12060, #5336, #13175, #6465, #14265, #7601, #952, #8741, #2051, #9868, #3159, #11006, #4278, #12105, #5378, #13217, #6508, #14308, #7647, #1001, #8787, #2091, #9918, #3203, #11044 ), + ( #4318, #12152, #5417, #13260, #6553, #14352, #7692, #1044, #8834, #2132, #9954, #3244, #11086, #4361, #12194, #5465, #13301, #6597, #1, #7739, #1087, #8878, #2178, #9998, #3285, #11133, #4403, #12236, #5506, #13347 ), + ( #6642, #49, #7789, #1135, #8922, #2223, #10043, #3331, #11181, #4455, #12280, #5558, #13386, #6693, #93, #7833, #1187, #8970, #2270, #10097, #3379, #11224, #4495, #12331, #5606, #13433, #6739, #143, #7879, #1228 ), + ( #9018, #2316, #10143, #3429, #11270, #4542, #12371, #5657, #13476, #7196, #574, #8347, #1672, #9466, #2766, #10605, #3886, #11719, #4986, #12829, #6113, #13921, #7246, #621, #8397, #1716, #9522, #2811, #10653, #3933 ), + ( #11768, #5033, #12879, #6164, #13973, #7290, #668, #8446, #1761, #9567, #2862, #10696, #3975, #11812, #5088, #12926, #6218, #14024, #7345, #717, #8498, #1815, #9624, #2916, #10759, #4026, #11868, #5141, #12978, #6265 ), + ( #14079, #7407, #767, #8550, #1872, #9679, #2971, #10814, #4084, #11919, #5194, #13035, #6324, #14134, #7462, #825, #8608, #1918, #9735, #3024, #10870, #4135, #11973, #5243, #13085, #6379, #14367, #7709, #1060, #8851 ), + ( #2148, #9970, #3258, #11104, #4378, #12209, #5482, #13320, #6614, #21, #7760, #1104, #8895, #2199, #10014, #3301, #11152, #4424, #12255, #5527, #13361, #6662, #67, #7806, #1157, #8941, #2241, #10066, #3348, #11195 ), + ( #4470, #12301, #5577, #13404, #6713, #113, #7851, #1203, #8989, #2288, #10116, #3400, #11242, #4514, #12347, #5627, #13448, #6756, #162, #7896, #1240, #9035, #2334, #10159, #3443, #11291, #4557, #12390, #5676, #13494 ), + ( #6801, #202, #7948, #1283, #9080, #2382, #10208, #3488, #11334, #4606, #12435, #5721, #13537, #6849, #238, #7990, #1330, #9126, #2420, #10252, #3535, #11377, #4646, #12486, #5770, #13580, #6894, #289, #8037, #1377 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 4, 2, 1, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 1, 1, 2, 4 ), + ( 0.0000000000000000000, 0.01578396094255325700, 0.03156792188510651500, 0.06313584377021302900, 0.1262716875404260600, 0.1894075313106390900, 0.2209754531957456000, 0.2525433750808521200, 0.2602714252121409700, 0.3143677761311629000, 0.3761921771814736900, 0.4380165782317844700, 0.4689287787569398300, 0.4998409792820952500, 0.5311350231106235500, 0.5624290669391517300, 0.6250171545962082100, 0.6876052422532646900, 0.7188992860817928800, 0.7501933299103211700, 0.7814191636715310800, 0.8126449974327408800, 0.8750966649551605900, 0.9375483324775802900, 0.9687741662387900900, 1.000000000000000000 ), + ( 0.0000000000000000000, 0.001953125000000000000, 0.03125000000000000000, 0.06250000000000000000, 0.1250000000000000000, 0.2500000000000000000, 0.3750000000000000000, 0.4375000000000000000, 0.5000000000000000000, 0.5625000000000000000, 0.6250000000000000000, 0.7500000000000000000, 0.8750000000000000000, 0.9375000000000000000, 0.9687500000000000000, 0.9980468750000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#10594 = CARTESIAN_POINT ( 'NONE', ( 30.95186944270268700, -30.32577958089482500, 27.17626659905431200 ) ) ; +#10595 = CARTESIAN_POINT ( 'NONE', ( 13.99953127095436400, -20.01384545781221600, 22.81373943744309700 ) ) ; +#10596 = CARTESIAN_POINT ( 'NONE', ( 7.847615316894771100, -30.50008625389604300, 26.62309135058223600 ) ) ; +#10597 = CARTESIAN_POINT ( 'NONE', ( 36.28113541226328200, -28.93432280639392200, 22.32485507351305600 ) ) ; +#10598 = FACE_OUTER_BOUND ( 'NONE', #7814, .T. ) ; +#10599 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -99.99999999999998600, 6.630571736238761300 ) ) ; +#10600 = CARTESIAN_POINT ( 'NONE', ( 4.305285267164475000, -30.37719212258350900, 24.11244610327154100 ) ) ; +#10601 = CARTESIAN_POINT ( 'NONE', ( 17.64545145376410300, -33.43814961503964900, 28.48292143413002400 ) ) ; +#10602 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -99.99999999999998600, -40.86942826376123600 ) ) ; +#10603 = ORIENTED_EDGE ( 'NONE', *, *, #2833, .F. ) ; +#10604 = CARTESIAN_POINT ( 'NONE', ( 34.92051596316366600, -100.0000000000000100, -4.448475004225461900 ) ) ; +#10605 = CARTESIAN_POINT ( 'NONE', ( 29.55501800641786000, -30.78735451774976500, 27.68649267032297300 ) ) ; +#10606 = CARTESIAN_POINT ( 'NONE', ( -1.500922423586149500E-014, -99.99999999999998600, 21.63057173623875300 ) ) ; +#10607 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000900, 17.50000000000000400 ) ) ; +#10608 = CARTESIAN_POINT ( 'NONE', ( 26.75740871579794000, -11.52265969145612200, 24.73151401395907100 ) ) ; +#10609 = CARTESIAN_POINT ( 'NONE', ( 22.79180405616356400, -12.49999999999998600, -14.53271368289409100 ) ) ; +#10610 = EDGE_CURVE ( 'NONE', #6987, #11145, #9930, .T. ) ; +#10611 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141808200, -28.87043262030299900, 21.75755471858354500 ) ) ; +#10612 = CARTESIAN_POINT ( 'NONE', ( 34.72702979039134900, -12.49999999999990900, 12.49942113013759500 ) ) ; +#10613 = CARTESIAN_POINT ( 'NONE', ( 32.93537566164696500, -29.91728870892662700, 26.11735573372909900 ) ) ; +#10614 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11466, #3618, #371, #8132, #1462, #9257, #2558, #10374, #3664, #11511, #4779, #12610, #5904, #13717, #7035, #415, #8180, #1516, #9307, #2602, #10428, #3718, #11558, #4820, #12662, #5953, #13760, #7081 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001343751784440683000, 0.002687503568881366000, 0.005375007137762732000, 0.006718758922203412600, 0.008062510706644092400, 0.01075001427552546100, 0.01343751784440682500, 0.01612502141328819200, 0.01881252498216955800, 0.02015627676661024100, 0.02082815265883058300, 0.02116409060494075400, 0.02150002855105092500 ), + .UNSPECIFIED. ) ; +#10615 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, -1.981438871123700300 ) ) ; +#10616 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 12.00000000000000000, -24.99999999999999300 ) ) ; +#10617 = CARTESIAN_POINT ( 'NONE', ( 37.01479964947074600, -21.55042375124331900, -15.67920860288109900 ) ) ; +#10618 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.50836417161596600, 10.00776309439366700 ) ) ; +#10619 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -3.189999999999994200 ) ) ; +#10620 = ORIENTED_EDGE ( 'NONE', *, *, #12149, .T. ) ; +#10621 = CARTESIAN_POINT ( 'NONE', ( 2.586021373517195500, -7.500000000000000000, 20.65015935806862400 ) ) ; +#10622 = CARTESIAN_POINT ( 'NONE', ( 35.17827028776319800, -29.19525916222051600, 24.03741103691236700 ) ) ; +#10623 = CARTESIAN_POINT ( 'NONE', ( 28.12554359826888000, -20.04138688653275900, 22.11769503154335900 ) ) ; +#10624 = CARTESIAN_POINT ( 'NONE', ( 22.31280616483239100, -30.22505362207415300, 26.39521083043857900 ) ) ; +#10625 = CARTESIAN_POINT ( 'NONE', ( 26.76579720796505800, -19.99870468029769600, 22.63518692405083500 ) ) ; +#10626 = CARTESIAN_POINT ( 'NONE', ( 9.638588650532081900, -30.47432395645435900, 27.42182731384883700 ) ) ; +#10627 = CARTESIAN_POINT ( 'NONE', ( 35.53752547020238900, -29.84214366957032600, 24.30204023940764200 ) ) ; +#10628 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -96.75656818788911600, 6.749276979338960200 ) ) ; +#10629 = EDGE_CURVE ( 'NONE', #1250, #10454, #13091, .T. ) ; +#10630 = CARTESIAN_POINT ( 'NONE', ( 24.94440271799599200, -93.17114783909195800, 22.75320746355495100 ) ) ; +#10631 = ADVANCED_FACE ( 'NONE', ( #14278 ), #8846, .F. ) ; +#10632 = CARTESIAN_POINT ( 'NONE', ( 28.14848682944677100, -10.83022320979833700, 24.85360924810218100 ) ) ; +#10633 = CARTESIAN_POINT ( 'NONE', ( 13.54077580713331500, -20.03888970696450800, 22.69752790004969300 ) ) ; +#10634 = CARTESIAN_POINT ( 'NONE', ( 28.23798691720079300, -11.26208799513759800, 24.54509666472949200 ) ) ; +#10635 = CARTESIAN_POINT ( 'NONE', ( 6.215670628065316400, -29.94668332959845700, 25.61521930127266700 ) ) ; +#10636 = CARTESIAN_POINT ( 'NONE', ( 39.52358515839125600, -11.89318924142201400, 8.336466296484539700 ) ) ; +#10637 = CARTESIAN_POINT ( 'NONE', ( 12.68884649690908600, -24.10197168219942700, 19.03261256933756900 ) ) ; +#10638 = CARTESIAN_POINT ( 'NONE', ( 13.16688016247448100, -11.37085805371135700, 24.75828073840919400 ) ) ; +#10639 = CARTESIAN_POINT ( 'NONE', ( 0.08018524164119696100, -9.999999999999536400, 9.769168276914877300 ) ) ; +#10640 = CARTESIAN_POINT ( 'NONE', ( 30.97098159807268700, -30.70332908727258900, 27.15352446171328200 ) ) ; +#10641 = CARTESIAN_POINT ( 'NONE', ( 8.212270556333852100, -28.74794513004160000, 26.84955217698289000 ) ) ; +#10642 = CARTESIAN_POINT ( 'NONE', ( 8.091429582500927300, -31.11604928271371400, 26.51877736238189700 ) ) ; +#10643 = CARTESIAN_POINT ( 'NONE', ( 37.29476797486932300, -29.68679573007165500, 22.17508435336563000 ) ) ; +#10644 = LINE ( 'NONE', #12417, #4656 ) ; +#10645 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#10646 = ORIENTED_EDGE ( 'NONE', *, *, #6070, .F. ) ; +#10647 = EDGE_CURVE ( 'NONE', #9886, #7788, #2084, .T. ) ; +#10648 = CARTESIAN_POINT ( 'NONE', ( 4.632040131082306700, -29.32365930632697400, 24.01960609507260700 ) ) ; +#10649 = CARTESIAN_POINT ( 'NONE', ( 12.67670021455258400, -39.02155075754205900, 19.07620989343422800 ) ) ; +#10650 = CARTESIAN_POINT ( 'NONE', ( 42.39346046021842100, -95.07596123493894400, -1.866925240466575500 ) ) ; +#10651 = CARTESIAN_POINT ( 'NONE', ( 38.59121215879312000, -10.31263201587462100, 16.69032969759672700 ) ) ; +#10652 = CARTESIAN_POINT ( 'NONE', ( 32.70383782689199800, -22.03500000000001400, 15.01188799670646300 ) ) ; +#10653 = CARTESIAN_POINT ( 'NONE', ( 29.55554444862647800, -30.90284906791706400, 27.66113884756849100 ) ) ; +#10654 = CARTESIAN_POINT ( 'NONE', ( 30.11771964037729900, -97.40649683660852500, 21.00661528024170700 ) ) ; +#10655 = PLANE ( 'NONE', #5696 ) ; +#10656 = CARTESIAN_POINT ( 'NONE', ( 37.83764092573586900, -11.92449110551134900, -19.04418663574475100 ) ) ; +#10657 = VECTOR ( 'NONE', #3145, 1000.000000000000000 ) ; +#10658 = CARTESIAN_POINT ( 'NONE', ( 22.48146071973757300, -28.77816371652370400, 29.18890308861619700 ) ) ; +#10659 = CARTESIAN_POINT ( 'NONE', ( 24.87015202731868900, -12.50000000000000500, 8.384250729335882100 ) ) ; +#10660 = CARTESIAN_POINT ( 'NONE', ( 33.01600290480627100, -30.65063692492359900, 26.11546143576966400 ) ) ; +#10661 = ORIENTED_EDGE ( 'NONE', *, *, #13382, .T. ) ; +#10662 = CARTESIAN_POINT ( 'NONE', ( 28.41233504895504000, -9.781278335272125100, -24.99999999999999600 ) ) ; +#10663 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10664 = CARTESIAN_POINT ( 'NONE', ( 39.82795725296524100, -7.500000000000000000, 21.30031871613859100 ) ) ; +#10665 = CARTESIAN_POINT ( 'NONE', ( 17.33306408266572200, -12.50000000000002000, -14.54564343327133000 ) ) ; +#10666 = CARTESIAN_POINT ( 'NONE', ( 35.92998795377597800, -29.01810801608550200, 22.99734878203727100 ) ) ; +#10667 = CARTESIAN_POINT ( 'NONE', ( 9.232475852999179700, -99.99999999999997200, 20.35471749731766500 ) ) ; +#10668 = CARTESIAN_POINT ( 'NONE', ( 26.73304057557126300, -19.72004632307904300, 22.66701606007190900 ) ) ; +#10669 = CARTESIAN_POINT ( 'NONE', ( 33.61325832698722800, -94.72616509782149300, 15.98040649258836500 ) ) ; +#10670 = CARTESIAN_POINT ( 'NONE', ( 3.550532363144278700, -28.87042587368937800, 21.75716330057233300 ) ) ; +#10671 = CARTESIAN_POINT ( 'NONE', ( 9.833470219619181700, -30.81446406088224800, 27.45984969024012300 ) ) ; +#10672 = CARTESIAN_POINT ( 'NONE', ( 35.30171113174019100, -30.86729684998256600, 23.91272501640084200 ) ) ; +#10673 = ORIENTED_EDGE ( 'NONE', *, *, #11355, .T. ) ; +#10674 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999747000, -94.55768749320783700, 4.933039381731789200 ) ) ; +#10675 = CARTESIAN_POINT ( 'NONE', ( 2.202743003830879500, -18.81097201532339400, 8.005331014629296900 ) ) ; +#10676 = CARTESIAN_POINT ( 'NONE', ( 2.197693238470316100, -18.79674173888426500, 7.760436785922607300 ) ) ; +#10677 = CARTESIAN_POINT ( 'NONE', ( 26.84752224756304900, -28.08124121815344800, 26.96588792518211300 ) ) ; +#10678 = CARTESIAN_POINT ( 'NONE', ( 6.477153661947029100, -31.11921954241145400, 25.41528407346575200 ) ) ; +#10679 = EDGE_LOOP ( 'NONE', ( #5040, #8595, #1666, #11189 ) ) ; +#10680 = CARTESIAN_POINT ( 'NONE', ( 39.91981361689686700, -10.00000000000000500, 9.769181058786831100 ) ) ; +#10681 = CARTESIAN_POINT ( 'NONE', ( 12.28474158207224500, -12.50000000000000400, 20.92398877871846400 ) ) ; +#10682 = DIRECTION ( 'NONE', ( 1.630640067418198700E-014, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#10683 = CARTESIAN_POINT ( 'NONE', ( 1.047263741430976700, -11.88777812820706500, 12.46875174870814200 ) ) ; +#10684 = VERTEX_POINT ( 'NONE', #3116 ) ; +#10685 = CARTESIAN_POINT ( 'NONE', ( 30.95181747816144800, -31.03715050188777600, 27.05071705577385500 ) ) ; +#10686 = CARTESIAN_POINT ( 'NONE', ( 9.335014446131538100, -27.10663845492263500, 19.57983347029346500 ) ) ; +#10687 = CARTESIAN_POINT ( 'NONE', ( 8.042107587412546700, -30.65292918921762300, 26.69778413552100800 ) ) ; +#10688 = CARTESIAN_POINT ( 'NONE', ( 36.31147099967644500, -30.67210293099311300, 22.01722448132240500 ) ) ; +#10689 = EDGE_CURVE ( 'NONE', #1982, #1180, #10345, .T. ) ; +#10690 = ORIENTED_EDGE ( 'NONE', *, *, #7874, .F. ) ; +#10691 = CARTESIAN_POINT ( 'NONE', ( 4.748879850806869000, -95.03089605088769100, 10.29465736413705200 ) ) ; +#10692 = CARTESIAN_POINT ( 'NONE', ( 4.601238962541615700, -30.76845380499235500, 23.97807938813771500 ) ) ; +#10693 = CARTESIAN_POINT ( 'NONE', ( 11.70205175531707000, -31.73787585330913100, 20.01290877163166100 ) ) ; +#10694 = CARTESIAN_POINT ( 'NONE', ( 35.15000894052366200, -95.07596123493894400, 3.052861428454219300 ) ) ; +#10695 = CARTESIAN_POINT ( 'NONE', ( 29.16022420043981000, -100.0000000000000100, 4.680906571415836700 ) ) ; +#10696 = CARTESIAN_POINT ( 'NONE', ( 29.24733584645453300, -30.78435875070292800, 27.78795205557208400 ) ) ; +#10697 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -100.0000000000000700, 21.63057173623875300 ) ) ; +#10698 = CARTESIAN_POINT ( 'NONE', ( 0.01416892047263151200, 8.388284189408860700, 20.39445895443064000 ) ) ; +#10699 = ADVANCED_FACE ( 'NONE', ( #8000 ), #5778, .F. ) ; +#10700 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -97.40634803306923600, 22.08790255657621800 ) ) ; +#10701 = ORIENTED_EDGE ( 'NONE', *, *, #12384, .F. ) ; +#10702 = CARTESIAN_POINT ( 'NONE', ( 36.25566910756978000, -97.04531648070948800, 18.39963808766758600 ) ) ; +#10703 = CARTESIAN_POINT ( 'NONE', ( 3.466458782106005100, -30.51772429850682000, 21.46670159410450700 ) ) ; +#10704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#10705 = CARTESIAN_POINT ( 'NONE', ( 34.54101631873468400, -22.96581316474814500, 10.90660097048438700 ) ) ; +#10706 = CARTESIAN_POINT ( 'NONE', ( 32.63890572942362700, -29.86820291017878000, 26.26633469184683600 ) ) ; +#10707 = CARTESIAN_POINT ( 'NONE', ( 3.563047595085123500, -30.55562900231690200, 21.46001804219594100 ) ) ; +#10708 = VERTEX_POINT ( 'NONE', #5507 ) ; +#10709 = CARTESIAN_POINT ( 'NONE', ( 29.27169525553632900, -10.53082735410296800, -25.03559597671577900 ) ) ; +#10710 = CARTESIAN_POINT ( 'NONE', ( 4.849604375360056200, -10.01030339717064200, 22.66968200243135100 ) ) ; +#10711 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.22554797644831100, 15.70939352957128900 ) ) ; +#10712 = CARTESIAN_POINT ( 'NONE', ( 14.60276700552602100, -20.81005212292383200, -24.06627915949029600 ) ) ; +#10713 = LINE ( 'NONE', #12860, #11100 ) ; +#10714 = EDGE_CURVE ( 'NONE', #3383, #3696, #2407, .T. ) ; +#10715 = CARTESIAN_POINT ( 'NONE', ( 13.03881200549174200, -13.18126690985738700, 24.34088111312472000 ) ) ; +#10716 = CARTESIAN_POINT ( 'NONE', ( 36.35424418473427700, -28.91555552236267300, 22.16242832508582000 ) ) ; +#10717 = CARTESIAN_POINT ( 'NONE', ( 2.499450204048057100, -20.40691112115131400, 7.940678590035893200 ) ) ; +#10718 = ORIENTED_EDGE ( 'NONE', *, *, #6594, .T. ) ; +#10719 = CARTESIAN_POINT ( 'NONE', ( 25.27877358799297300, -19.43939053663454400, 23.08321801723921100 ) ) ; +#10720 = CARTESIAN_POINT ( 'NONE', ( 14.56865313667960700, -24.18803195101107300, 19.64509450692154900 ) ) ; +#10721 = CARTESIAN_POINT ( 'NONE', ( 2.366003869806047700, -10.00577354972623900, 20.10430461088505500 ) ) ; +#10722 = CARTESIAN_POINT ( 'NONE', ( 9.836111468350401000, -30.57404132441176600, 27.49401446968821000 ) ) ; +#10723 = CARTESIAN_POINT ( 'NONE', ( 35.15620672558331700, -29.44782060635736100, 24.33045961779882700 ) ) ; +#10724 = CARTESIAN_POINT ( 'NONE', ( 15.74729373664837700, -12.50000000000002100, 9.402039695531216900 ) ) ; +#10725 = VERTEX_POINT ( 'NONE', #6466 ) ; +#10726 = CARTESIAN_POINT ( 'NONE', ( 37.41265628358135600, -91.27442453181336600, -1.521502677801414000 ) ) ; +#10727 = CARTESIAN_POINT ( 'NONE', ( 3.116873297895190300, -18.93344180078908300, 13.14822615165891800 ) ) ; +#10728 = CIRCLE ( 'NONE', #9323, 2.499999999999997800 ) ; +#10729 = CARTESIAN_POINT ( 'NONE', ( 2.397613648118658100, -19.58810100001597500, 7.889491077991621600 ) ) ; +#10730 = CARTESIAN_POINT ( 'NONE', ( 39.52658467759808800, -11.89366128960763400, 8.005331014629280900 ) ) ; +#10731 = CARTESIAN_POINT ( 'NONE', ( 6.337517810417091700, -30.30659849990495000, 25.75926302070378800 ) ) ; +#10732 = CARTESIAN_POINT ( 'NONE', ( 33.94457390170680400, -18.55890307536170200, -22.08240661122317100 ) ) ; +#10733 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4152, #11005, #5261 ), + ( #13103, #6397, #14203 ), + ( #7531, #885, #8678 ), + ( #1983, #9801, #3098 ), + ( #10940, #4206, #12039 ), + ( #5314, #13152, #6445 ), + ( #14246, #7580, #932 ), + ( #8719, #2035, #9845 ), + ( #3138, #10988, #4254 ), + ( #12083, #5357, #13198 ), + ( #6488, #14288, #7626 ), + ( #975, #8764, #2072 ), + ( #9894, #3180, #11026 ), + ( #4301, #12130, #5395 ), + ( #13240, #6533, #14332 ), + ( #7669, #1025, #8811 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -1.387778780781445700E-017, 0.003259104033807885000, 0.006518208067615783800, 0.008147760084519731900, 0.009777312101423681800, 0.01059208810987565700, 0.01140686411832763200, 0.01303641613523158100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4931454283001431300, 1.000000000000000000), + ( 1.000000000000000000, 0.4931320981799337500, 1.000000000000000000), + ( 1.000000000000000000, 0.4931949942713232900, 1.000000000000000000), + ( 1.000000000000000000, 0.4935811994052026200, 1.000000000000000000), + ( 1.000000000000000000, 0.4938415038553553000, 1.000000000000000000), + ( 1.000000000000000000, 0.4943676275159055200, 1.000000000000000000), + ( 1.000000000000000000, 0.4945727909188479800, 1.000000000000000000), + ( 1.000000000000000000, 0.4950260224234084300, 1.000000000000000000), + ( 1.000000000000000000, 0.4952558202061638200, 1.000000000000000000), + ( 1.000000000000000000, 0.4956646225905752000, 1.000000000000000000), + ( 1.000000000000000000, 0.4957908788285223000, 1.000000000000000000), + ( 1.000000000000000000, 0.4960671350603669800, 1.000000000000000000), + ( 1.000000000000000000, 0.4962112208634314500, 1.000000000000000000), + ( 1.000000000000000000, 0.4966665181169568900, 1.000000000000000000), + ( 1.000000000000000000, 0.4970015337751059200, 1.000000000000000000), + ( 1.000000000000000000, 0.4973655342198658500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10734 = CARTESIAN_POINT ( 'NONE', ( 41.29713705167985400, -10.00000000000000000, 13.08771575529514300 ) ) ; +#10735 = VERTEX_POINT ( 'NONE', #10044 ) ; +#10736 = CARTESIAN_POINT ( 'NONE', ( 15.94160801865030300, -18.59125419801374300, 23.48513008676481600 ) ) ; +#10737 = CARTESIAN_POINT ( 'NONE', ( 16.76581978799193000, -12.50000000000002500, 10.02796544578825600 ) ) ; +#10738 = EDGE_CURVE ( 'NONE', #7318, #8587, #8204, .T. ) ; +#10739 = CARTESIAN_POINT ( 'NONE', ( 3.001506067749410100, -21.55560981182361100, -15.74357071138251400 ) ) ; +#10740 = CARTESIAN_POINT ( 'NONE', ( 1.238217935136197300, -10.00000000000000400, 18.86313528256133800 ) ) ; +#10741 = VECTOR ( 'NONE', #8581, 1000.000000000000000 ) ; +#10742 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 6.938893903907222500E-016 ) ) ; +#10743 = VERTEX_POINT ( 'NONE', #7790 ) ; +#10744 = CARTESIAN_POINT ( 'NONE', ( 30.77097392296556300, -30.63838080927897400, 27.24904614120063000 ) ) ; +#10745 = CIRCLE ( 'NONE', #12752, 3.189999999999995100 ) ; +#10746 = CARTESIAN_POINT ( 'NONE', ( 6.814332200343222300, -20.96064743390703100, 18.53426109774541100 ) ) ; +#10747 = CARTESIAN_POINT ( 'NONE', ( 8.089060287118178000, -30.08386040364172600, 26.70546375699455100 ) ) ; +#10748 = CARTESIAN_POINT ( 'NONE', ( 36.81333572297716500, -29.37378291933047300, 22.54742330827395200 ) ) ; +#10749 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12587, #9187, #13693, #7005 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.009785623483064519200, 0.01152703402264414400 ), + .UNSPECIFIED. ) ; +#10750 = CARTESIAN_POINT ( 'NONE', ( 2.500000000001545900, -95.04538050746241100, 6.962711608203080400 ) ) ; +#10751 = ORIENTED_EDGE ( 'NONE', *, *, #13636, .T. ) ; +#10752 = AXIS2_PLACEMENT_3D ( 'NONE', #8794, #2098, #9924 ) ; +#10753 = CARTESIAN_POINT ( 'NONE', ( 4.476402415472017900, -29.75996760639889900, 24.26555761689505500 ) ) ; +#10754 = CARTESIAN_POINT ( 'NONE', ( 5.401192630533684800, -31.56038146495008300, 24.13144155331810500 ) ) ; +#10755 = CARTESIAN_POINT ( 'NONE', ( 31.69682794205396800, -89.38768284284482500, 7.844758748651849500 ) ) ; +#10756 = CARTESIAN_POINT ( 'NONE', ( 6.505213034913027600E-016, -10.45050746764054500, 11.46393634116228500 ) ) ; +#10757 = CARTESIAN_POINT ( 'NONE', ( 23.33336499485021800, -22.03500000000001400, 20.37790478717369800 ) ) ; +#10758 = LINE ( 'NONE', #9903, #10360 ) ; +#10759 = CARTESIAN_POINT ( 'NONE', ( 29.24822713027154500, -30.86245020248521700, 27.77277334756211100 ) ) ; +#10760 = CARTESIAN_POINT ( 'NONE', ( 30.79058427153063300, -99.99999999999998600, 20.34211979670815400 ) ) ; +#10761 = CARTESIAN_POINT ( 'NONE', ( 39.65375916231366900, -11.38496335074530200, 9.447433308607548600 ) ) ; +#10762 = ORIENTED_EDGE ( 'NONE', *, *, #10403, .T. ) ; +#10763 = CARTESIAN_POINT ( 'NONE', ( 36.28687973558130900, -30.68083216994949000, 21.99964584568757100 ) ) ; +#10764 = CARTESIAN_POINT ( 'NONE', ( 2.566577560637658600, -29.48969798004427600, 21.64796933291459500 ) ) ; +#10765 = CARTESIAN_POINT ( 'NONE', ( 5.410446972845001300, -100.0000000000000300, -28.90004843828753400 ) ) ; +#10766 = CARTESIAN_POINT ( 'NONE', ( 35.09406331635300100, -12.49999999999948300, 10.20214698062032500 ) ) ; +#10767 = EDGE_CURVE ( 'NONE', #11145, #6101, #464, .T. ) ; +#10768 = CARTESIAN_POINT ( 'NONE', ( 32.73708126224841000, -30.51269103399440400, 26.31579999280442200 ) ) ; +#10769 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999987600, -21.23116646380261900, -11.74895849411025000 ) ) ; +#10770 = EDGE_LOOP ( 'NONE', ( #525, #10425, #13672, #3553 ) ) ; +#10771 = CARTESIAN_POINT ( 'NONE', ( 29.99574378632135900, -11.08828832296043700, -25.00000000000057900 ) ) ; +#10772 = CARTESIAN_POINT ( 'NONE', ( 27.75100220819167200, -21.28025442751791000, 29.99578934838773500 ) ) ; +#10773 = CARTESIAN_POINT ( 'NONE', ( 13.57550026174463100, -12.49999999999999500, -22.30956755468880800 ) ) ; +#10774 = LINE ( 'NONE', #9549, #10741 ) ; +#10775 = CARTESIAN_POINT ( 'NONE', ( 8.232795581756912300, -8.114834368907866100, 25.00000000000000400 ) ) ; +#10776 = CARTESIAN_POINT ( 'NONE', ( 8.728035263305470100, -11.43989062589193200, -25.00000000000000000 ) ) ; +#10777 = ORIENTED_EDGE ( 'NONE', *, *, #9102, .T. ) ; +#10778 = CARTESIAN_POINT ( 'NONE', ( 23.78270655994035100, -19.18426357024489800, 23.35617530254302600 ) ) ; +#10779 = CARTESIAN_POINT ( 'NONE', ( 15.03648457941131900, -12.49999999999973500, 21.81528563698725900 ) ) ; +#10780 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -96.37138356716127400, 5.695220015246742500 ) ) ; +#10781 = CARTESIAN_POINT ( 'NONE', ( 0.07785841796037891400, 10.13070237256533300, -16.79023454383172600 ) ) ; +#10782 = CARTESIAN_POINT ( 'NONE', ( 10.24042703872876300, -30.88787922652193900, 27.59276937980952100 ) ) ; +#10783 = CARTESIAN_POINT ( 'NONE', ( 35.38031647838080600, -30.53108039589195900, 24.34785972292629800 ) ) ; +#10784 = CARTESIAN_POINT ( 'NONE', ( 9.279241391508138600, -23.80673379945238500, 16.92697193666131400 ) ) ; +#10785 = ORIENTED_EDGE ( 'NONE', *, *, #13980, .F. ) ; +#10786 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438938600, 6.640374750079693900, 20.69000000000000100 ) ) ; +#10787 = CARTESIAN_POINT ( 'NONE', ( 11.69482572183193100, -19.16025967362696400, 22.27562692389087200 ) ) ; +#10788 = ADVANCED_FACE ( 'NONE', ( #5371 ), #4998, .T. ) ; +#10789 = CARTESIAN_POINT ( 'NONE', ( 2.499410019645943700, -20.40325589007855500, 7.936389486387586300 ) ) ; +#10790 = CARTESIAN_POINT ( 'NONE', ( 37.20760423421642600, -11.88310524172756300, 16.75554849846175300 ) ) ; +#10791 = CARTESIAN_POINT ( 'NONE', ( 6.581167606929339400, -31.16968660781154600, 25.44537161683978300 ) ) ; +#10792 = CARTESIAN_POINT ( 'NONE', ( 3.861854446828854900, -9.947542219069180900, 24.89781251723013600 ) ) ; +#10793 = FACE_OUTER_BOUND ( 'NONE', #4433, .T. ) ; +#10794 = CARTESIAN_POINT ( 'NONE', ( 36.72785441802746900, -11.88235587885995900, 17.54070388816336700 ) ) ; +#10795 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -90.07596123493897300, -4.350951650170485700 ) ) ; +#10796 = CARTESIAN_POINT ( 'NONE', ( 14.01094831797701100, -24.16706865195988700, 19.49604549847390100 ) ) ; +#10797 = CARTESIAN_POINT ( 'NONE', ( 4.595808056644582300, -20.21809338574723100, -19.40211298129695900 ) ) ; +#10798 = CARTESIAN_POINT ( 'NONE', ( 5.982319191038329500, -10.00000000000137500, 21.39263106089601900 ) ) ; +#10799 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, 3.189999999999994200 ) ) ; +#10800 = ORIENTED_EDGE ( 'NONE', *, *, #14235, .F. ) ; +#10801 = CARTESIAN_POINT ( 'NONE', ( 30.76055539861707900, -30.96809290754191900, 27.16657342118247700 ) ) ; +#10802 = CARTESIAN_POINT ( 'NONE', ( 2.873426396347917000, -28.72653875008504100, 18.99689838410726500 ) ) ; +#10803 = CARTESIAN_POINT ( 'NONE', ( 8.343676977157667100, -30.82506749585737500, 26.79796872227958100 ) ) ; +#10804 = CARTESIAN_POINT ( 'NONE', ( 36.54133782035123800, -30.54415894153259400, 22.33776153158367000 ) ) ; +#10805 = CARTESIAN_POINT ( 'NONE', ( 39.99726015004258500, -10.00000000000000000, -20.16550224408275900 ) ) ; +#10806 = ADVANCED_FACE ( 'NONE', ( #11018 ), #13565, .F. ) ; +#10807 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -95.45536033961572300, 3.667068596692887100 ) ) ; +#10808 = CARTESIAN_POINT ( 'NONE', ( 4.831425131423500800, -31.01168731708445800, 23.76895971560653100 ) ) ; +#10809 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8413, #12848, #7261, #1731, #9540, #2824, #10667, #3951, #11785, #5053, #12893, #6182, #13988, #7310, #684 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 1, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2266853937014523300, 0.4533707874029046500, 0.5667134842536307700, 0.6800561811043569500, 0.7367275295297199800, 0.7933988779550831300, 0.9067415748058088600 ), + .UNSPECIFIED. ) ; +#10810 = CARTESIAN_POINT ( 'NONE', ( 5.860928362429745200, -36.13860968186594400, 14.78079515440407700 ) ) ; +#10811 = CARTESIAN_POINT ( 'NONE', ( 25.13366849225826300, -95.07596123493894400, 15.82508929695141500 ) ) ; +#10812 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.044351670030987800, 16.42464966733536300 ) ) ; +#10813 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, -30.22903959689355700, 26.39450799553349500 ) ) ; +#10814 = CARTESIAN_POINT ( 'NONE', ( 29.14520942395147400, -30.76626777216180400, 27.82340139051375200 ) ) ; +#10815 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -1.200000000000007500 ) ) ; +#10816 = CARTESIAN_POINT ( 'NONE', ( 6.255721038933916000, -18.07985662322219900, -22.48042072780497600 ) ) ; +#10817 = CARTESIAN_POINT ( 'NONE', ( 39.52964867852153900, -11.88140528591386200, 8.024955557388068400 ) ) ; +#10818 = ORIENTED_EDGE ( 'NONE', *, *, #9947, .F. ) ; +#10819 = CARTESIAN_POINT ( 'NONE', ( 35.94937925531989700, -30.82937809448449300, 22.64496543972923300 ) ) ; +#10820 = EDGE_CURVE ( 'NONE', #305, #13145, #5573, .T. ) ; +#10821 = CARTESIAN_POINT ( 'NONE', ( 3.560249138084936600, -30.56614510144407100, 21.52590704274819800 ) ) ; +#10822 = CARTESIAN_POINT ( 'NONE', ( 8.056627639132537800, -20.28809933266904900, -19.93447082893067100 ) ) ; +#10823 = CARTESIAN_POINT ( 'NONE', ( 24.99618723453395600, -12.49999999999994300, 7.731549779966314000 ) ) ; +#10824 = CARTESIAN_POINT ( 'NONE', ( 32.63916995223267700, -31.15445505703484500, 26.03998013211874300 ) ) ; +#10825 = CARTESIAN_POINT ( 'NONE', ( 30.76588479267449100, -12.19189320637908500, -24.99999999999999600 ) ) ; +#10826 = CARTESIAN_POINT ( 'NONE', ( 7.012387016970945900, -10.21891901494672800, 23.35039710829311200 ) ) ; +#10827 = DIRECTION ( 'NONE', ( -7.103262821921560300E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10828 = CARTESIAN_POINT ( 'NONE', ( 16.49259998263592000, -12.50000000000000200, -14.33162461862414500 ) ) ; +#10829 = CARTESIAN_POINT ( 'NONE', ( 3.973071706963415800, -89.69640923368777400, 2.374388476378175300 ) ) ; +#10830 = AXIS2_PLACEMENT_3D ( 'NONE', #7510, #871, #8656 ) ; +#10831 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #8369, #5056, #12897 ), + ( #6186, #13992, #7313 ), + ( #687, #8466, #1783 ), + ( #9589, #2884, #10721 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.009414027337012383400, 0.01006875421042738300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811871572000, 1.000000000000000000), + ( 1.000000000000000000, 0.7130121277562087000, 1.000000000000000000), + ( 1.000000000000000000, 0.7196123181338679500, 1.000000000000000000), + ( 1.000000000000000000, 0.7258093592940130200, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10832 = CARTESIAN_POINT ( 'NONE', ( 13.35289518698755800, -13.07399679421159900, 24.45797142657471900 ) ) ; +#10833 = CARTESIAN_POINT ( 'NONE', ( 22.31280744310812000, -31.29913968154959000, 28.74438700826458900 ) ) ; +#10834 = CARTESIAN_POINT ( 'NONE', ( 16.51235033525488300, -89.20772034659545100, 11.03354182248491000 ) ) ; +#10835 = APPROVAL_PERSON_ORGANIZATION ( #10852, #170, #3366 ) ; +#10836 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -99.99999999999998600, 21.63057173623876000 ) ) ; +#10837 = CARTESIAN_POINT ( 'NONE', ( 17.33270274568143400, -12.50000000000003400, 10.13746824488577900 ) ) ; +#10838 = EDGE_LOOP ( 'NONE', ( #13450, #2445, #5267, #5952, #4797, #8896, #7928, #2692, #438, #3567 ) ) ; +#10839 = CARTESIAN_POINT ( 'NONE', ( 10.24001790047075900, -30.72087891730343400, 27.62612429769688300 ) ) ; +#10840 = CARTESIAN_POINT ( 'NONE', ( 34.88955743948536500, -29.26931260933565700, 24.37266308958516300 ) ) ; +#10841 = CARTESIAN_POINT ( 'NONE', ( 8.651814828176828300, -12.49999999999988800, 18.41254957413861600 ) ) ; +#10842 = CARTESIAN_POINT ( 'NONE', ( 17.39693543307884100, -19.87568216611861900, 23.25829123793067100 ) ) ; +#10843 = EDGE_CURVE ( 'NONE', #13964, #13324, #10644, .T. ) ; +#10844 = DIRECTION ( 'NONE', ( -4.336808689942012800E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#10845 = CARTESIAN_POINT ( 'NONE', ( 2.500792712205197600, -21.21814994024236300, 7.947176892152407700 ) ) ; +#10846 = PLANE ( 'NONE', #8785 ) ; +#10847 = CARTESIAN_POINT ( 'NONE', ( 6.423521516500567700, -30.51525450712749800, 25.79089129812175300 ) ) ; +#10848 = CARTESIAN_POINT ( 'NONE', ( 22.56802803820556100, -19.90811152822217900, 23.25289388203999200 ) ) ; +#10849 = FACE_OUTER_BOUND ( 'NONE', #6808, .T. ) ; +#10850 = CARTESIAN_POINT ( 'NONE', ( 34.01766399289913800, -9.999999999998634000, 21.39264562003154100 ) ) ; +#10851 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10852 = PERSON_AND_ORGANIZATION ( #9068, #11176 ) ; +#10853 = CARTESIAN_POINT ( 'NONE', ( 23.99362418286894200, -30.65936817474672100, 28.85719598640244900 ) ) ; +#10854 = CARTESIAN_POINT ( 'NONE', ( 39.67735505568865800, -11.29057977724533200, 9.738761650140848000 ) ) ; +#10855 = ORIENTED_EDGE ( 'NONE', *, *, #5880, .T. ) ; +#10856 = AXIS2_PLACEMENT_3D ( 'NONE', #8336, #3867, #11706 ) ; +#10857 = CARTESIAN_POINT ( 'NONE', ( 6.376393314241001400, -18.55034406473687600, -22.43883931910725900 ) ) ; +#10858 = CARTESIAN_POINT ( 'NONE', ( 9.310196217810672100, -11.87801758036214200, 23.18769853768025200 ) ) ; +#10859 = CARTESIAN_POINT ( 'NONE', ( 37.86483225804273900, -30.00243691922138100, 21.55795181842201600 ) ) ; +#10860 = CARTESIAN_POINT ( 'NONE', ( 30.66556655204965800, -30.51296934289978000, 27.30048929431919500 ) ) ; +#10861 = CARTESIAN_POINT ( 'NONE', ( 3.901043034769873700, -26.10230852250241200, 13.55110401342633300 ) ) ; +#10862 = CARTESIAN_POINT ( 'NONE', ( 8.353502752001732600, -30.31932238696874600, 26.86644672104029000 ) ) ; +#10863 = CARTESIAN_POINT ( 'NONE', ( 36.21136801341423700, -29.08258961440392900, 22.79892803522749700 ) ) ; +#10864 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999988900, -90.07596123493894400, -4.350951650170706800 ) ) ; +#10865 = EDGE_CURVE ( 'NONE', #9886, #9900, #8362, .T. ) ; +#10866 = CARTESIAN_POINT ( 'NONE', ( 4.397495722147772800, -30.09567122014589900, 24.31410551001979700 ) ) ; +#10867 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -95.07596123493894400, 9.081879798262816500 ) ) ; +#10868 = ORIENTED_EDGE ( 'NONE', *, *, #9697, .T. ) ; +#10869 = CARTESIAN_POINT ( 'NONE', ( 9.307359174008611900, -11.99261116098765400, -24.99999999999999600 ) ) ; +#10870 = CARTESIAN_POINT ( 'NONE', ( 29.14485501930303700, -30.82950857292945600, 27.81260864489519600 ) ) ; +#10871 = CARTESIAN_POINT ( 'NONE', ( 36.94264211276531300, -20.11267873992427400, -15.70139190560002800 ) ) ; +#10872 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -30.66316004106086600, 28.85652737806401900 ) ) ; +#10873 = ADVANCED_FACE ( 'NONE', ( #7658 ), #3968, .F. ) ; +#10874 = CARTESIAN_POINT ( 'NONE', ( 10.36537676327744100, -97.40634803306923600, 21.15396858868975400 ) ) ; +#10875 = CARTESIAN_POINT ( 'NONE', ( 35.08523812443323200, -31.04248943024371600, 23.82751647680226600 ) ) ; +#10876 = CARTESIAN_POINT ( 'NONE', ( 2.515649710021213200, -29.83909317215174200, 21.65481648364817200 ) ) ; +#10877 = CARTESIAN_POINT ( 'NONE', ( 11.92068888923827400, -100.0000000000000300, -37.03852336990893700 ) ) ; +#10878 = ORIENTED_EDGE ( 'NONE', *, *, #332, .F. ) ; +#10879 = CARTESIAN_POINT ( 'NONE', ( 32.53283957017571700, -30.35495781236472400, 26.43026998548570100 ) ) ; +#10880 = CARTESIAN_POINT ( 'NONE', ( 10.85914025882272100, -10.27921275622568600, 25.00000000000000000 ) ) ; +#10881 = CARTESIAN_POINT ( 'NONE', ( 0.2312753136785982400, -10.92510125471432800, 10.59883323478510600 ) ) ; +#10882 = CARTESIAN_POINT ( 'NONE', ( 11.66519097206619000, -20.96533419455769500, -22.96141884346227600 ) ) ; +#10883 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #2379, #11288 ), + ( #12431, #5718 ), + ( #13534, #6846 ), + ( #235, #7987 ), + ( #1327, #9122 ), + ( #2417, #10249 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1250000000000001100, 0.1792476661914406700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#10884 = CARTESIAN_POINT ( 'NONE', ( -2.499111742179007700, -95.07596123493894400, -4.542352223618777000 ) ) ; +#10885 = ORIENTED_EDGE ( 'NONE', *, *, #13306, .F. ) ; +#10886 = CARTESIAN_POINT ( 'NONE', ( 19.22904794238652600, -31.32859295629786800, 28.73919360125625000 ) ) ; +#10887 = CARTESIAN_POINT ( 'NONE', ( 7.422220727681760400, -95.07596123493894400, 13.24180778520156000 ) ) ; +#10888 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#10889 = ORIENTED_EDGE ( 'NONE', *, *, #4174, .T. ) ; +#10890 = CARTESIAN_POINT ( 'NONE', ( 37.79765555455552600, -18.80937778177775900, 8.005331014629280900 ) ) ; +#10891 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -7.511547099454119800, 20.00000000000000000 ) ) ; +#10892 = CARTESIAN_POINT ( 'NONE', ( 4.332999685857006800, -15.80728769097733100, -20.94822827450649100 ) ) ; +#10893 = CARTESIAN_POINT ( 'NONE', ( 10.44427472198929500, -30.90258602299420000, 27.66107213599817200 ) ) ; +#10894 = CARTESIAN_POINT ( 'NONE', ( 35.29761077939247800, -30.28093144326463500, 24.58933543849800400 ) ) ; +#10895 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000002200, -27.34536682578104200, 7.998753314054021700 ) ) ; +#10896 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -20.76351822333076700, -24.39789867012037700 ) ) ; +#10897 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -97.04531648070948800, 16.23785755017195600 ) ) ; +#10898 = ORIENTED_EDGE ( 'NONE', *, *, #8524, .T. ) ; +#10899 = CARTESIAN_POINT ( 'NONE', ( 2.198875504807829500, -18.79538528760757300, 8.012247158525330100 ) ) ; +#10900 = CARTESIAN_POINT ( 'NONE', ( 4.179262562055551900, -10.00000000000000400, 22.36143813341286800 ) ) ; +#10901 = CARTESIAN_POINT ( 'NONE', ( 6.573688140458139100, -29.67385078070164900, 25.72005420979602500 ) ) ; +#10902 = CARTESIAN_POINT ( 'NONE', ( 6.763359963038857900, -18.54088238239076600, -22.82935076964789200 ) ) ; +#10903 = CARTESIAN_POINT ( 'NONE', ( 31.86857118295571900, -10.00000000000000400, 25.30686574574372500 ) ) ; +#10904 = CARTESIAN_POINT ( 'NONE', ( 28.06928444693376400, -33.04097291147008500, 27.70512374658255100 ) ) ; +#10905 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13761, #5954, #465, #8231, #1558, #9355, #2649, #10479, #3765, #11607, #4870, #12710, #6008, #13812, #7130, #516 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 5.204170427930421300E-018, 0.002113410071360027700, 0.004226820142720050200, 0.008453640285440105700, 0.01268046042816016100, 0.01479387049952018300, 0.01585057553520018800, 0.01690728057088020100 ), + .UNSPECIFIED. ) ; +#10906 = CARTESIAN_POINT ( 'NONE', ( 3.694472640417515200, -28.92733569399106800, 22.26170678893436900 ) ) ; +#10907 = CARTESIAN_POINT ( 'NONE', ( 14.64070171165608200, -99.99999999999995700, 6.300051934314584700 ) ) ; +#10908 = EDGE_LOOP ( 'NONE', ( #7576, #10574, #330 ) ) ; +#10909 = CARTESIAN_POINT ( 'NONE', ( 10.92390302346897500, -22.34171280156416400, -25.64370315136742600 ) ) ; +#10910 = CARTESIAN_POINT ( 'NONE', ( 3.740958563886447300, -95.39149166735431600, 12.92966260851852100 ) ) ; +#10911 = CARTESIAN_POINT ( 'NONE', ( 30.66909385132527500, -30.83091887786767800, 27.25282387987123700 ) ) ; +#10912 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991100, -26.55300411125331200, 7.631701365047982600 ) ) ; +#10913 = CARTESIAN_POINT ( 'NONE', ( 8.459966332689489800, -31.01847973640635200, 26.77256571438641300 ) ) ; +#10914 = CARTESIAN_POINT ( 'NONE', ( 36.83744480109528800, -30.17175052808562800, 22.63685975701155300 ) ) ; +#10915 = ORIENTED_EDGE ( 'NONE', *, *, #6531, .F. ) ; +#10916 = EDGE_CURVE ( 'NONE', #3860, #1999, #1388, .T. ) ; +#10917 = DIRECTION ( 'NONE', ( 0.9014945988743656700, 0.0000000000000000000, 0.4327903513253808500 ) ) ; +#10918 = CARTESIAN_POINT ( 'NONE', ( 4.850199555763099500, -29.20230136072928700, 24.07138165878317800 ) ) ; +#10919 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.04531648070921800, 16.23785755017283700 ) ) ; +#10920 = ORIENTED_EDGE ( 'NONE', *, *, #11935, .F. ) ; +#10921 = SPHERICAL_SURFACE ( 'NONE', #7412, 2.500000000000000000 ) ; +#10922 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5850, #3653, #11499 ), + ( #4768, #12600, #5894 ), + ( #13707, #7022, #405 ), + ( #8170, #1504, #9294 ), + ( #2593, #10416, #3705 ), + ( #11549, #4812, #12649 ), + ( #5941, #13751, #7072 ), + ( #453, #8219, #1550 ), + ( #9344, #2639, #10465 ), + ( #3755, #11595, #4859 ), + ( #12698, #5994, #13797 ), + ( #7118, #506, #8268 ), + ( #1593, #9390, #2687 ), + ( #10516, #3801, #11641 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.02947061465226654500, 0.03275945131951463200, 0.03604828798676271800, 0.03687049715357473800, 0.03769270632038676500, 0.03933712465401080500, 0.04262596132125889100 ), + ( 0.0000000000000000000, 0.5306459368286559100 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470069700), + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470069700), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470067500), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470067500), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470067500), + ( 1.000000000000000000, 0.9662662388186964400, 0.9683338442470067500), + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470070800), + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470070800), + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470070800), + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470070800), + ( 1.000000000000000000, 0.9662662388186968900, 0.9683338442470073000), + ( 1.000000000000000000, 0.9662662388186968900, 0.9683338442470073000), + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470070800), + ( 1.000000000000000000, 0.9662662388186966700, 0.9683338442470070800) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#10923 = CARTESIAN_POINT ( 'NONE', ( 35.51574160782127600, -21.85706175120276700, -19.49573936026087000 ) ) ; +#10924 = CARTESIAN_POINT ( 'NONE', ( 26.20750466655230300, -15.10766994066946000, 24.02574505542927600 ) ) ; +#10925 = CARTESIAN_POINT ( 'NONE', ( 22.38869901311450800, -33.86963066632297600, 20.79114009398124800 ) ) ; +#10926 = AXIS2_PLACEMENT_3D ( 'NONE', #12825, #6111, #13918 ) ; +#10927 = CARTESIAN_POINT ( 'NONE', ( 34.04397509854951700, -31.15231293378262800, 24.90488305495409800 ) ) ; +#10928 = CARTESIAN_POINT ( 'NONE', ( 3.528987713433730200, -28.89033770519229400, 21.82144240828107900 ) ) ; +#10929 = VERTEX_POINT ( 'NONE', #11408 ) ; +#10930 = CARTESIAN_POINT ( 'NONE', ( 32.49039113672858300, -31.01511561596310400, 26.24027173031724700 ) ) ; +#10931 = CARTESIAN_POINT ( 'NONE', ( 3.788455267746054100, -29.08230345589098300, 22.79679332346902900 ) ) ; +#10932 = CARTESIAN_POINT ( 'NONE', ( 28.38615980667946600, -10.20382562188300200, -25.03593995649759300 ) ) ; +#10933 = CARTESIAN_POINT ( 'NONE', ( 0.02666110672248079400, -10.10664442688986700, 11.01202874625366400 ) ) ; +#10934 = CARTESIAN_POINT ( 'NONE', ( 12.13935183240845600, -12.50000000000005700, -21.73428699588445700 ) ) ; +#10935 = EDGE_LOOP ( 'NONE', ( #3746, #12330, #9733, #1186, #10074, #1523 ) ) ; +#10936 = CARTESIAN_POINT ( 'NONE', ( 3.756871313281488600, -99.99999999999997200, 17.91973306515990000 ) ) ; +#10937 = EDGE_CURVE ( 'NONE', #2269, #3457, #7099, .T. ) ; +#10938 = VECTOR ( 'NONE', #4905, 1000.000000000000000 ) ; +#10939 = CARTESIAN_POINT ( 'NONE', ( 5.996800709773288500, -95.07596123493894400, 4.623480266339889500 ) ) ; +#10940 = CARTESIAN_POINT ( 'NONE', ( 12.28816050616181600, -94.74261830663284900, 18.15894733187263200 ) ) ; +#10941 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -39.52045731841470700, 19.79474689191102500 ) ) ; +#10942 = CARTESIAN_POINT ( 'NONE', ( 4.643840237190946900, -10.51366922874673400, -25.09057374414518200 ) ) ; +#10943 = CARTESIAN_POINT ( 'NONE', ( 10.44477819205631500, -30.77739975728373200, 27.68810727135228700 ) ) ; +#10944 = CARTESIAN_POINT ( 'NONE', ( 34.88863629949806700, -31.07158306264131300, 24.05397504192501000 ) ) ; +#10945 = CARTESIAN_POINT ( 'NONE', ( 2.616607116334011400, -28.91905668512205100, 15.44936631783595300 ) ) ; +#10946 = CARTESIAN_POINT ( 'NONE', ( 9.881501691629509300, -21.12349089134150400, -21.83219710892642200 ) ) ; +#10947 = FACE_OUTER_BOUND ( 'NONE', #4836, .T. ) ; +#10948 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10949 = ADVANCED_FACE ( 'NONE', ( #13912 ), #1055, .F. ) ; +#10950 = ORIENTED_EDGE ( 'NONE', *, *, #7977, .T. ) ; +#10951 = CARTESIAN_POINT ( 'NONE', ( 2.398728954450102300, -19.58491554548138000, 8.127603971729975300 ) ) ; +#10952 = CARTESIAN_POINT ( 'NONE', ( 6.386776242956452500, -94.72606175908731500, 15.98072096801389500 ) ) ; +#10953 = CIRCLE ( 'NONE', #8168, 3.189999999999994200 ) ; +#10954 = CARTESIAN_POINT ( 'NONE', ( 6.632651148010074500, -30.76386162341349400, 25.82934089458537100 ) ) ; +#10955 = CARTESIAN_POINT ( 'NONE', ( 15.25452036619823400, -17.78993282606567000, -26.37357533514186500 ) ) ; +#10956 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5908, #470, #13816, #7135 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 6.499207794975075700E-005 ), + .UNSPECIFIED. ) ; +#10957 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 5.018561128876299000, -19.99999999999999600 ) ) ; +#10958 = CARTESIAN_POINT ( 'NONE', ( 27.64802858184528500, -31.80744843288566800, 20.24908556833200600 ) ) ; +#10959 = CARTESIAN_POINT ( 'NONE', ( 4.030914026539071500, -29.00915026928090500, 22.93202019442194100 ) ) ; +#10960 = CARTESIAN_POINT ( 'NONE', ( 6.646494699878918900, -99.99999999999995700, 0.2282800123429989900 ) ) ; +#10961 = ORIENTED_EDGE ( 'NONE', *, *, #5706, .F. ) ; +#10962 = EDGE_CURVE ( 'NONE', #9371, #11213, #6930, .T. ) ; +#10963 = CARTESIAN_POINT ( 'NONE', ( 13.77957568291600100, -20.42008981305842900, -26.36987538254333800 ) ) ; +#10964 = CARTESIAN_POINT ( 'NONE', ( 37.95107450363978800, -11.90489205978570400, -18.81572701578148000 ) ) ; +#10965 = CARTESIAN_POINT ( 'NONE', ( 30.36176830543164900, -30.48077870957894600, 27.42177660943207900 ) ) ; +#10966 = CARTESIAN_POINT ( 'NONE', ( 39.52658467759808800, -11.89366128960763400, 8.005331014629280900 ) ) ; +#10967 = CARTESIAN_POINT ( 'NONE', ( 8.436960363471357000, -30.54731377459428600, 26.90497717725585900 ) ) ; +#10968 = CARTESIAN_POINT ( 'NONE', ( 35.82591225042992300, -29.04364185722055300, 23.17264835160105500 ) ) ; +#10969 = LINE ( 'NONE', #8963, #11087 ) ; +#10970 = ORIENTED_EDGE ( 'NONE', *, *, #11463, .T. ) ; +#10971 = CARTESIAN_POINT ( 'NONE', ( 24.39612660847214800, -12.50000000000003900, -13.66057818479071900 ) ) ; +#10972 = CARTESIAN_POINT ( 'NONE', ( 4.571958302689495200, -30.38254896343972400, 24.41713815438501800 ) ) ; +#10973 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999799600, -94.98562511284465900, 13.37631531866916600 ) ) ; +#10974 = EDGE_LOOP ( 'NONE', ( #12840, #11064, #11635, #5656 ) ) ; +#10975 = CARTESIAN_POINT ( 'NONE', ( 32.55147918962257600, -18.52412514917385200, -23.52100323950702100 ) ) ; +#10976 = CARTESIAN_POINT ( 'NONE', ( 36.48025037089269100, -28.88244952392659200, 21.75543578860425200 ) ) ; +#10977 = CARTESIAN_POINT ( 'NONE', ( 32.29564258978990700, -31.13941766544230600, 26.27055552955299000 ) ) ; +#10978 = CARTESIAN_POINT ( 'NONE', ( 2.829180217181748600, -30.20766334458082300, 21.65298176586390600 ) ) ; +#10979 = FACE_OUTER_BOUND ( 'NONE', #9794, .T. ) ; +#10980 = CARTESIAN_POINT ( 'NONE', ( 12.98906380034837000, -11.07180489606461100, 24.81101187876838700 ) ) ; +#10981 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -90.07596123493894400, 10.95758058754439400 ) ) ; +#10982 = CARTESIAN_POINT ( 'NONE', ( 32.11638888998188400, -30.15134102172916600, 26.61728407099531800 ) ) ; +#10983 = CARTESIAN_POINT ( 'NONE', ( 5.511852830117232000, -21.98066141353101000, -21.04961662749121500 ) ) ; +#10984 = CARTESIAN_POINT ( 'NONE', ( 16.16652320109306700, -12.49999999999999800, -14.15252222429055400 ) ) ; +#10985 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#10986 = ORIENTED_EDGE ( 'NONE', *, *, #13787, .F. ) ; +#10987 = CARTESIAN_POINT ( 'NONE', ( 22.38869825307920200, -25.52353201642538800, 22.26278246961262800 ) ) ; +#10988 = CARTESIAN_POINT ( 'NONE', ( 7.284520689917185300, -93.14125367206330000, 20.86462410614678500 ) ) ; +#10989 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#10990 = CARTESIAN_POINT ( 'NONE', ( 2.500551666394682700, -21.21984131744006100, 7.920870232500869100 ) ) ; +#10991 = CARTESIAN_POINT ( 'NONE', ( 32.99330648001983900, -10.21834425738743600, 23.34859753923228400 ) ) ; +#10992 = CARTESIAN_POINT ( 'NONE', ( 10.44427407963442000, -30.66026240206133800, 27.70378577531678500 ) ) ; +#10993 = CARTESIAN_POINT ( 'NONE', ( 34.93995188414320600, -30.07936738416928400, 24.87634275147415500 ) ) ; +#10994 = CARTESIAN_POINT ( 'NONE', ( 5.160657581638379700, -22.21743232152475400, -13.99981249858519100 ) ) ; +#10995 = PLANE ( 'NONE', #571 ) ; +#10996 = ORIENTED_EDGE ( 'NONE', *, *, #10559, .T. ) ; +#10997 = CARTESIAN_POINT ( 'NONE', ( 2.506769166022684700, -20.38052699215279900, 8.429318818315987700 ) ) ; +#10998 = CARTESIAN_POINT ( 'NONE', ( 11.76499325809074400, -94.74154463553627200, 18.01716254689253600 ) ) ; +#10999 = CARTESIAN_POINT ( 'NONE', ( 6.670737162043375100, -29.97949035616888500, 25.91051784899499900 ) ) ; +#11000 = CARTESIAN_POINT ( 'NONE', ( 14.79666618718286000, -20.44369207706329000, -26.84150469139671800 ) ) ; +#11001 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -15.51856112887629800 ) ) ; +#11002 = CARTESIAN_POINT ( 'NONE', ( 30.77684276098911900, -38.09223847783071900, 17.52858580492770500 ) ) ; +#11003 = CARTESIAN_POINT ( 'NONE', ( 4.789520119868461400, -29.18756811348294300, 23.99891238745476900 ) ) ; +#11004 = CARTESIAN_POINT ( 'NONE', ( 17.64400393970128900, -18.42946738620680600, -27.31212427297052900 ) ) ; +#11005 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -93.17319105032913700, 22.83432234620768100 ) ) ; +#11006 = CARTESIAN_POINT ( 'NONE', ( 30.36966707972882100, -30.75188206976562100, 27.39491921345047500 ) ) ; +#11007 = CARTESIAN_POINT ( 'NONE', ( 25.75833234292393600, -100.0000000000000300, -37.93648162946808400 ) ) ; +#11008 = CARTESIAN_POINT ( 'NONE', ( 8.660698503678755600, -31.07113559878080300, 26.84713768352775200 ) ) ; +#11009 = CARTESIAN_POINT ( 'NONE', ( 36.55233049642323100, -29.92985308029829700, 23.17352802688148100 ) ) ; +#11010 = CARTESIAN_POINT ( 'NONE', ( 4.939992723320701300, -29.30299719484802500, 24.26548753592414800 ) ) ; +#11011 = CARTESIAN_POINT ( 'NONE', ( 28.95564610611128800, -20.39038020082297100, -25.35895765636368900 ) ) ; +#11012 = CARTESIAN_POINT ( 'NONE', ( 37.48458660955501600, -29.82661692245766700, 21.58895252150130200 ) ) ; +#11013 = ADVANCED_FACE ( 'NONE', ( #12540 ), #9101, .F. ) ; +#11014 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -39.52045731841470700, 19.79474689191102900 ) ) ; +#11015 = CARTESIAN_POINT ( 'NONE', ( 30.73742458368380100, -31.01793227844730400, 27.15782804860955600 ) ) ; +#11016 = EDGE_CURVE ( 'NONE', #9349, #4366, #7578, .T. ) ; +#11017 = CARTESIAN_POINT ( 'NONE', ( 3.136289827307049200, -29.07588202168077600, 21.85190572213842600 ) ) ; +#11018 = FACE_OUTER_BOUND ( 'NONE', #8662, .T. ) ; +#11019 = CARTESIAN_POINT ( 'NONE', ( 23.59967335794075200, -18.88048157766829100, 23.43413149617266800 ) ) ; +#11020 = CARTESIAN_POINT ( 'NONE', ( 32.14664556662662400, -30.77111725440671100, 26.56527488768782800 ) ) ; +#11021 = FACE_OUTER_BOUND ( 'NONE', #12160, .T. ) ; +#11022 = ORIENTED_EDGE ( 'NONE', *, *, #4397, .F. ) ; +#11023 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -22.46243069294101600, -27.19746277637470700 ) ) ; +#11024 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -10.00000000000000000, 20.00000000000000000 ) ) ; +#11025 = CARTESIAN_POINT ( 'NONE', ( 10.47341010489919800, -21.06520622710070600, -22.24914677148202800 ) ) ; +#11026 = CARTESIAN_POINT ( 'NONE', ( 5.604045878058598400, -97.44693880714254400, 19.35402795020371900 ) ) ; +#11027 = CARTESIAN_POINT ( 'NONE', ( 10.75250401573284600, -30.81491454309144400, 27.78247786331259300 ) ) ; +#11028 = CARTESIAN_POINT ( 'NONE', ( 34.69784129150985300, -30.98831050525046400, 24.46116860170842200 ) ) ; +#11029 = VERTEX_POINT ( 'NONE', #6974 ) ; +#11030 = CARTESIAN_POINT ( 'NONE', ( 22.55794980690657100, -33.35025653084942100, 26.50741664928542100 ) ) ; +#11031 = EDGE_CURVE ( 'NONE', #13947, #2296, #10279, .T. ) ; +#11032 = CARTESIAN_POINT ( 'NONE', ( 33.85265813444737400, -30.91406730050938400, 25.35259677788086900 ) ) ; +#11033 = CARTESIAN_POINT ( 'NONE', ( 2.547989695675842100, -21.12779301179682900, 9.049231465528331200 ) ) ; +#11034 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11035 = CARTESIAN_POINT ( 'NONE', ( 6.798414994327518300, -31.05968362785024100, 25.72516312334011700 ) ) ; +#11036 = CARTESIAN_POINT ( 'NONE', ( 17.50000000000052200, -22.46243069294101200, -27.19746277637470300 ) ) ; +#11037 = CARTESIAN_POINT ( 'NONE', ( 36.58788629091674200, -30.44840393649330300, 21.17219657682817400 ) ) ; +#11038 = CARTESIAN_POINT ( 'NONE', ( 6.639419773566698000, -29.66765100772571300, 25.75699851340049700 ) ) ; +#11039 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.500000000000000000, -24.99999999999999300 ) ) ; +#11040 = AXIS2_PLACEMENT_3D ( 'NONE', #3511, #13558, #6876 ) ; +#11041 = CARTESIAN_POINT ( 'NONE', ( 22.39376114441429500, -28.77640292087669800, 29.18921356439622300 ) ) ; +#11042 = CARTESIAN_POINT ( 'NONE', ( 37.80227886707714900, -18.79558716289303500, 7.812874096093319800 ) ) ; +#11043 = ORIENTED_EDGE ( 'NONE', *, *, #4439, .F. ) ; +#11044 = CARTESIAN_POINT ( 'NONE', ( 30.36134371131564800, -30.98186242770948000, 27.33231123126240200 ) ) ; +#11045 = CARTESIAN_POINT ( 'NONE', ( 30.78778345452908400, -20.28809933267076800, -21.12248391764673600 ) ) ; +#11046 = CARTESIAN_POINT ( 'NONE', ( 8.632533386358334200, -30.67562075284134700, 26.97901883648828700 ) ) ; +#11047 = CARTESIAN_POINT ( 'NONE', ( 35.82738449013171300, -30.87131344451895400, 22.85027252655536500 ) ) ; +#11048 = ORIENTED_EDGE ( 'NONE', *, *, #5535, .F. ) ; +#11049 = EDGE_CURVE ( 'NONE', #8982, #7883, #13220, .T. ) ; +#11050 = CARTESIAN_POINT ( 'NONE', ( 4.866022406097368200, -30.74498584111142600, 24.35099758905524700 ) ) ; +#11051 = CARTESIAN_POINT ( 'NONE', ( 30.21513839476101300, -12.66549609558552400, -25.08649169343632600 ) ) ; +#11052 = CARTESIAN_POINT ( 'NONE', ( 26.29724285099800700, -22.42404677647872900, -26.70315537146541000 ) ) ; +#11053 = CARTESIAN_POINT ( 'NONE', ( 31.24557842579885400, -32.37240435201579900, 24.71507424885337300 ) ) ; +#11054 = ORIENTED_EDGE ( 'NONE', *, *, #2753, .T. ) ; +#11055 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999600, -95.07596123493894400, 17.53844207640287000 ) ) ; +#11056 = CARTESIAN_POINT ( 'NONE', ( 3.410205428102465000, -30.52937560987352200, 21.71238132282198000 ) ) ; +#11057 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, -99.99999999999998600, -6.100827442047402000 ) ) ; +#11058 = CARTESIAN_POINT ( 'NONE', ( 31.90858120485832900, -30.07085961045950400, 26.70366484441289900 ) ) ; +#11059 = VERTEX_POINT ( 'NONE', #4816 ) ; +#11060 = CARTESIAN_POINT ( 'NONE', ( 29.93072479962659600, -11.54857221863508700, -25.05792072942436400 ) ) ; +#11061 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238600 ) ) ; +#11062 = CARTESIAN_POINT ( 'NONE', ( 10.04147583150810900, -12.49999999999911000, -20.47980109572499100 ) ) ; +#11063 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000011500, -21.23116646380262700, -11.74895849411024600 ) ) ; +#11064 = ORIENTED_EDGE ( 'NONE', *, *, #3189, .T. ) ; +#11065 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -90.07596123493894400, 15.95758058754439400 ) ) ; +#11066 = CARTESIAN_POINT ( 'NONE', ( 10.75162289051575800, -30.73638200710156100, 27.79492040780944300 ) ) ; +#11067 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #26, #10072, #2247, #11199 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001330694774650161000 ), + .UNSPECIFIED. ) ; +#11068 = CARTESIAN_POINT ( 'NONE', ( 34.62227066321449300, -29.69797213446264200, 24.93546707553070600 ) ) ; +#11069 = VERTEX_POINT ( 'NONE', #13803 ) ; +#11070 = CARTESIAN_POINT ( 'NONE', ( 24.46823340247761500, -12.50000000000134500, 21.90617541133590200 ) ) ; +#11071 = CARTESIAN_POINT ( 'NONE', ( 33.71584715467204100, -29.71935418726210200, 25.56054741018847000 ) ) ; +#11072 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -90.07596123493894400, 15.95758058754439400 ) ) ; +#11073 = VECTOR ( 'NONE', #5001, 1000.000000000000000 ) ; +#11074 = CARTESIAN_POINT ( 'NONE', ( 37.67704855766621100, -19.29180576933497800, 7.982934898013748900 ) ) ; +#11075 = ADVANCED_FACE ( 'NONE', ( #7281 ), #12205, .F. ) ; +#11076 = CARTESIAN_POINT ( 'NONE', ( 2.500121663074375000, -18.86594786757797200, 10.89711633368548900 ) ) ; +#11077 = CARTESIAN_POINT ( 'NONE', ( 6.704347451582905600, -30.32882253997497600, 25.99689583102748700 ) ) ; +#11078 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, -11.53187062879840900 ) ) ; +#11079 = ORIENTED_EDGE ( 'NONE', *, *, #4951, .F. ) ; +#11080 = CARTESIAN_POINT ( 'NONE', ( 34.75588479098939800, -31.07415537202712500, 14.98628702465050100 ) ) ; +#11081 = CARTESIAN_POINT ( 'NONE', ( 8.831844583096003700, -30.26819653371718700, 27.07735126498186800 ) ) ; +#11082 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#11083 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999999300, -10.63029199490054000, 10.52636262089157000 ) ) ; +#11084 = CARTESIAN_POINT ( 'NONE', ( 37.49946145736070900, -21.22070855642012800, 7.919154190836261300 ) ) ; +#11085 = ORIENTED_EDGE ( 'NONE', *, *, #13439, .T. ) ; +#11086 = CARTESIAN_POINT ( 'NONE', ( 30.16684153388207800, -30.70947493009645900, 27.47996368218646200 ) ) ; +#11087 = VECTOR ( 'NONE', #1080, 1000.000000000000000 ) ; +#11088 = CARTESIAN_POINT ( 'NONE', ( 33.73394150420017500, -100.0000000000000300, -31.23633444691233400 ) ) ; +#11089 = CARTESIAN_POINT ( 'NONE', ( 8.660621445982780400, -30.22435041299404500, 26.99662342665535400 ) ) ; +#11090 = CARTESIAN_POINT ( 'NONE', ( 36.24043194795317600, -29.64582802891676400, 23.44326165219099100 ) ) ; +#11091 = EDGE_CURVE ( 'NONE', #12057, #7738, #1728, .T. ) ; +#11092 = EDGE_LOOP ( 'NONE', ( #5801, #2986, #8271, #14270, #9251 ) ) ; +#11093 = CARTESIAN_POINT ( 'NONE', ( 4.866000069993051000, -29.67644819477441200, 24.53940486215382300 ) ) ; +#11094 = CARTESIAN_POINT ( 'NONE', ( 22.55762127725338200, -27.96664356551895700, 27.45669629599068900 ) ) ; +#11095 = FACE_OUTER_BOUND ( 'NONE', #3733, .T. ) ; +#11096 = CARTESIAN_POINT ( 'NONE', ( 9.158775931295737700, -10.61983027554840000, 23.95755244057964000 ) ) ; +#11097 = EDGE_LOOP ( 'NONE', ( #12669, #11810, #6183, #8747 ) ) ; +#11098 = AXIS2_PLACEMENT_3D ( 'NONE', #13863, #7179, #563 ) ; +#11099 = CARTESIAN_POINT ( 'NONE', ( 2.641153890641061000, -29.47777020515153600, 21.89152984769996700 ) ) ; +#11100 = VECTOR ( 'NONE', #9401, 1000.000000000000000 ) ; +#11101 = CARTESIAN_POINT ( 'NONE', ( 26.51292748340880600, -12.33076241733244900, 24.58902370020302500 ) ) ; +#11102 = CARTESIAN_POINT ( 'NONE', ( 31.95789954944220000, -30.63130285880012600, 26.70234964493211600 ) ) ; +#11103 = CARTESIAN_POINT ( 'NONE', ( 38.27339572549613700, -10.05375953237827800, -19.17028665471515200 ) ) ; +#11104 = CARTESIAN_POINT ( 'NONE', ( 28.94018626326870000, -30.78765507872488500, 27.88348535421311400 ) ) ; +#11105 = VERTEX_POINT ( 'NONE', #2694 ) ; +#11106 = CARTESIAN_POINT ( 'NONE', ( 33.51158913523345700, -9.903390357385639200, 21.90239726599047300 ) ) ; +#11107 = CARTESIAN_POINT ( 'NONE', ( 7.547273615272835000, -23.55374641374778500, 15.12580443029573400 ) ) ; +#11108 = CARTESIAN_POINT ( 'NONE', ( 15.74821592576237900, -12.50000000000000000, -13.81123918674525400 ) ) ; +#11109 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995100, -29.71061054856849600, 21.60901759478832700 ) ) ; +#11110 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#11111 = EDGE_CURVE ( 'NONE', #3457, #9297, #4341, .T. ) ; +#11112 = ORIENTED_EDGE ( 'NONE', *, *, #11016, .F. ) ; +#11113 = CARTESIAN_POINT ( 'NONE', ( 37.28372942194457800, -29.35026061169146800, 17.29255186581471500 ) ) ; +#11114 = CARTESIAN_POINT ( 'NONE', ( 34.70783551679858200, -30.67026697350588500, 24.85827100543870900 ) ) ; +#11115 = ORIENTED_EDGE ( 'NONE', *, *, #8437, .F. ) ; +#11116 = AXIS2_PLACEMENT_3D ( 'NONE', #5669, #6888, #13573 ) ; +#11117 = CARTESIAN_POINT ( 'NONE', ( 22.97399677283390700, -12.50000000000001200, 10.09496840152718600 ) ) ; +#11118 = CARTESIAN_POINT ( 'NONE', ( 33.84000156923987400, -30.58631276746239500, 25.57936913888877200 ) ) ; +#11119 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11120 = CARTESIAN_POINT ( 'NONE', ( 3.025708380950443900, -19.54373929309630900, 12.33544925080412100 ) ) ; +#11121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11122 = CARTESIAN_POINT ( 'NONE', ( 7.009034007469463900, -31.16542691598168700, 25.78173818725488400 ) ) ; +#11123 = CARTESIAN_POINT ( 'NONE', ( 1.746791987190521100, -11.87195532289731000, -18.16382525059077900 ) ) ; +#11124 = VECTOR ( 'NONE', #1621, 1000.000000000000000 ) ; +#11125 = ORIENTED_EDGE ( 'NONE', *, *, #3494, .F. ) ; +#11126 = CARTESIAN_POINT ( 'NONE', ( 36.68468426860143000, -32.11798959398321100, 10.84415656343810500 ) ) ; +#11127 = CARTESIAN_POINT ( 'NONE', ( 11.26586904079728800, -30.82654731345162700, 27.93780948131385200 ) ) ; +#11128 = CARTESIAN_POINT ( 'NONE', ( 22.60237864385764100, -19.90864822626172500, 23.25255904423485000 ) ) ; +#11129 = EDGE_CURVE ( 'NONE', #8954, #5671, #9581, .T. ) ; +#11130 = CARTESIAN_POINT ( 'NONE', ( 38.72250614418550900, -10.39297762878228900, 16.15593269078505800 ) ) ; +#11131 = CARTESIAN_POINT ( 'NONE', ( 37.50054288208298200, -20.40235877642996300, 7.955750855405908900 ) ) ; +#11132 = ORIENTED_EDGE ( 'NONE', *, *, #8066, .T. ) ; +#11133 = CARTESIAN_POINT ( 'NONE', ( 30.16241324875670300, -30.94620217864299500, 27.42438809053550500 ) ) ; +#11134 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -20.28809933267076800, -11.58267031427237900 ) ) ; +#11135 = CARTESIAN_POINT ( 'NONE', ( 8.734162866001474500, -30.79709521373494500, 26.99716386615796900 ) ) ; +#11136 = CARTESIAN_POINT ( 'NONE', ( 35.90031808015581300, -30.76459338479794800, 23.12517979255194300 ) ) ; +#11137 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000900, 17.50000000000000400 ) ) ; +#11138 = LINE ( 'NONE', #13253, #11755 ) ; +#11139 = CARTESIAN_POINT ( 'NONE', ( 27.54747226146161800, -10.00000000000000000, 25.00000000000000000 ) ) ; +#11140 = CARTESIAN_POINT ( 'NONE', ( 5.348079226143458900, -31.05414598416896500, 24.39958910388346400 ) ) ; +#11141 = CARTESIAN_POINT ( 'NONE', ( 2.201425001453300100, -18.80570000581306500, 7.788262581895140500 ) ) ; +#11142 = CARTESIAN_POINT ( 'NONE', ( 11.76044685354238700, -10.21539878538069600, -25.03798061747447800 ) ) ; +#11143 = ADVANCED_FACE ( 'NONE', ( #3277 ), #12851, .T. ) ; +#11144 = CARTESIAN_POINT ( 'NONE', ( 17.44205019309341500, -33.35025653084942100, 26.50741664928542100 ) ) ; +#11145 = VERTEX_POINT ( 'NONE', #10670 ) ; +#11146 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#11147 = CARTESIAN_POINT ( 'NONE', ( 28.01512580115776200, -10.15232558920127000, 24.97314088877150700 ) ) ; +#11148 = CARTESIAN_POINT ( 'NONE', ( 3.619725548166467200, -30.62098289042251800, 21.75529101082958400 ) ) ; +#11149 = CARTESIAN_POINT ( 'NONE', ( 24.46128675077944300, -21.82332057518716800, -26.98163735375282000 ) ) ; +#11150 = CARTESIAN_POINT ( 'NONE', ( 31.90845232802668000, -31.11525760679674200, 26.51926046215341900 ) ) ; +#11151 = CARTESIAN_POINT ( 'NONE', ( 2.366003869806051300, -10.00577354972706000, 20.10430461088509800 ) ) ; +#11152 = CARTESIAN_POINT ( 'NONE', ( 28.93940161624697500, -30.81853227257683900, 27.87845618563159500 ) ) ; +#11153 = CARTESIAN_POINT ( 'NONE', ( 36.48025089164445200, -30.53890501263930100, 21.46335736016448700 ) ) ; +#11154 = CARTESIAN_POINT ( 'NONE', ( 25.92028516076932800, -10.00000000000000400, 25.47533241661072600 ) ) ; +#11155 = CARTESIAN_POINT ( 'NONE', ( 7.489573487577551700, -21.46166776490029800, -19.41697854262127600 ) ) ; +#11156 = CARTESIAN_POINT ( 'NONE', ( 1.700306033740436300, -10.08116930238276500, -19.10870469426828000 ) ) ; +#11157 = CARTESIAN_POINT ( 'NONE', ( 3.851777429298088000, -30.64550119860751200, 22.96429311477641000 ) ) ; +#11158 = ORIENTED_EDGE ( 'NONE', *, *, #9225, .F. ) ; +#11159 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -27.12263156217807800, 6.907741323545860000 ) ) ; +#11160 = ADVANCED_FACE ( 'NONE', ( #370 ), #14078, .F. ) ; +#11161 = AXIS2_PLACEMENT_3D ( 'NONE', #6936, #327, #8080 ) ; +#11162 = CARTESIAN_POINT ( 'NONE', ( 0.08613804197505381400, -10.28353667646320000, -12.29071353842611100 ) ) ; +#11163 = CARTESIAN_POINT ( 'NONE', ( 34.16225155198199600, -29.47845437635551800, 25.11273663654668900 ) ) ; +#11164 = CARTESIAN_POINT ( 'NONE', ( 26.91996260642707700, -24.12364680934392800, 19.18762980153052000 ) ) ; +#11165 = CARTESIAN_POINT ( 'NONE', ( 33.50235489327175700, -29.63020515632139200, 25.64874192559024400 ) ) ; +#11166 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4688, #13623, #3509, #11354 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#11167 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#11168 = CARTESIAN_POINT ( 'NONE', ( 3.614319988739903300, -20.13442714594715700, 13.74327742895807300 ) ) ; +#11169 = CARTESIAN_POINT ( 'NONE', ( 5.923147374054985400, -95.07596123493895800, 13.55977114504634600 ) ) ; +#11170 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -94.74682992296695300, 18.71443453778783800 ) ) ; +#11171 = CARTESIAN_POINT ( 'NONE', ( 6.882792728391753400, -30.53120291790423800, 26.09013939891754300 ) ) ; +#11172 = CARTESIAN_POINT ( 'NONE', ( -2.370771624145239100E-008, -10.00000001100101200, -12.92656167108316400 ) ) ; +#11173 = PERSON_AND_ORGANIZATION ( #9068, #11176 ) ; +#11174 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.36074002520679800, 8.074055433626226000 ) ) ; +#11175 = EDGE_CURVE ( 'NONE', #9297, #5973, #1164, .T. ) ; +#11176 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#11177 = CARTESIAN_POINT ( 'NONE', ( 12.15781162039155000, -10.03507259228269900, 24.99381575569717000 ) ) ; +#11178 = CARTESIAN_POINT ( 'NONE', ( 26.94153720350374600, -100.0000000000000100, -37.54596735492513200 ) ) ; +#11179 = ORIENTED_EDGE ( 'NONE', *, *, #13980, .T. ) ; +#11180 = CARTESIAN_POINT ( 'NONE', ( 37.60220220120958600, -19.58624575774603100, 7.986427338236108400 ) ) ; +#11181 = CARTESIAN_POINT ( 'NONE', ( 29.75955895746463000, -30.68358324093474800, 27.63110281184360800 ) ) ; +#11182 = CARTESIAN_POINT ( 'NONE', ( 8.747336146314861300, -30.34389655626925400, 27.04775154274053500 ) ) ; +#11183 = CARTESIAN_POINT ( 'NONE', ( 35.69465659949874900, -29.30190081656827100, 23.68362388116849400 ) ) ; +#11184 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #8516, #733, #13940, #1833, #9642, #2934 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 5.038468425965796200E-016, 0.0006545463986875143100, 0.001309092797374524900 ), + .UNSPECIFIED. ) ; +#11185 = CYLINDRICAL_SURFACE ( 'NONE', #1738, 5.000000000000000900 ) ; +#11186 = CARTESIAN_POINT ( 'NONE', ( 35.30143173523168800, -22.07901619476821200, 15.58813426227533800 ) ) ; +#11187 = CARTESIAN_POINT ( 'NONE', ( 5.051229078262959900, -30.11940998462413800, 24.87746028849515100 ) ) ; +#11188 = CARTESIAN_POINT ( 'NONE', ( 39.67735505568865800, -11.29057977724533200, 9.738761650140848000 ) ) ; +#11189 = ORIENTED_EDGE ( 'NONE', *, *, #7128, .F. ) ; +#11190 = CARTESIAN_POINT ( 'NONE', ( 26.91560883438671000, -95.07596123493895800, 16.47921297460220200 ) ) ; +#11191 = CARTESIAN_POINT ( 'NONE', ( 4.007078388738290400, -30.80173203870499800, 21.84946643694963000 ) ) ; +#11192 = EDGE_CURVE ( 'NONE', #2805, #10492, #10437, .T. ) ; +#11193 = CARTESIAN_POINT ( 'NONE', ( 2.556571343015003000, -29.82101643822019100, 21.88484778043262900 ) ) ; +#11194 = CARTESIAN_POINT ( 'NONE', ( 31.66090780754882100, -30.53559136293052800, 26.85949355399011300 ) ) ; +#11195 = CARTESIAN_POINT ( 'NONE', ( 28.94022410884420500, -30.84523830515915300, 27.87330973740396400 ) ) ; +#11196 = CARTESIAN_POINT ( 'NONE', ( 37.18117208241807200, -29.25008946604985700, 21.75894233792260500 ) ) ; +#11197 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#11198 = CARTESIAN_POINT ( 'NONE', ( 7.285374185964900400, -12.50000000000001200, -17.69343234662883900 ) ) ; +#11199 = CARTESIAN_POINT ( 'NONE', ( 17.64039537637300400, -27.96255689439422200, 27.45771657700752400 ) ) ; +#11200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.511547099454124200, 20.00000000000000000 ) ) ; +#11201 = VERTEX_POINT ( 'NONE', #14045 ) ; +#11202 = AXIS2_PLACEMENT_3D ( 'NONE', #2511, #10327, #3621 ) ; +#11203 = CARTESIAN_POINT ( 'NONE', ( 3.647279852184489400, -29.51179066174253100, 23.20498468287982900 ) ) ; +#11204 = CARTESIAN_POINT ( 'NONE', ( 9.523369595670757800, -9.903876952536684500, 23.89694954540582100 ) ) ; +#11205 = ORIENTED_EDGE ( 'NONE', *, *, #13081, .T. ) ; +#11206 = CARTESIAN_POINT ( 'NONE', ( 24.49589918418727700, -12.49999999999999800, -13.52509156151357500 ) ) ; +#11207 = CARTESIAN_POINT ( 'NONE', ( 15.30672553447436900, -39.40498971363391700, 19.69196865476508800 ) ) ; +#11208 = CARTESIAN_POINT ( 'NONE', ( 34.40471616410217600, -30.42978017664897500, 25.23837207360784900 ) ) ; +#11209 = CARTESIAN_POINT ( 'NONE', ( 28.35645509016263700, -12.49999999999998900, 20.61054017549544100 ) ) ; +#11210 = EDGE_CURVE ( 'NONE', #13145, #7550, #4161, .T. ) ; +#11211 = CARTESIAN_POINT ( 'NONE', ( 33.66787719970530900, -30.40618318338360400, 25.74979177174830300 ) ) ; +#11212 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#11213 = VERTEX_POINT ( 'NONE', #1892 ) ; +#11214 = CARTESIAN_POINT ( 'NONE', ( 5.042026603357302700, -20.52013640610896100, 16.39707322470859200 ) ) ; +#11215 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999600, -95.07596123493894400, 16.93034213569666900 ) ) ; +#11216 = CARTESIAN_POINT ( 'NONE', ( 35.05113299292238300, -35.14705678807949600, 13.67870921874832900 ) ) ; +#11217 = CARTESIAN_POINT ( 'NONE', ( 7.008695073543059100, -29.77189717144660400, 26.02799033937475700 ) ) ; +#11218 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -100.0000000000000100, -5.267905492818147000 ) ) ; +#11219 = CARTESIAN_POINT ( 'NONE', ( 36.16988456615024500, -10.00000000000000000, -24.86121076501353500 ) ) ; +#11220 = CARTESIAN_POINT ( 'NONE', ( 14.89367308691572900, -33.24550673869887200, 26.39773334638644900 ) ) ; +#11221 = CARTESIAN_POINT ( 'NONE', ( 34.34930629797813100, -100.0000000000000100, -29.71313003999630100 ) ) ; +#11222 = ORIENTED_EDGE ( 'NONE', *, *, #10738, .F. ) ; +#11223 = CARTESIAN_POINT ( 'NONE', ( 37.80107199448906400, -18.79548581972320800, 8.016310098266982800 ) ) ; +#11224 = CARTESIAN_POINT ( 'NONE', ( 29.75956171749678300, -30.85599046916722400, 27.60070171469477500 ) ) ; +#11225 = CARTESIAN_POINT ( 'NONE', ( 3.151693792279163900, -28.83516963390109900, 20.55738878257828600 ) ) ; +#11226 = CARTESIAN_POINT ( 'NONE', ( 8.942853920820045500, -30.96506486909113300, 27.03358110856600400 ) ) ; +#11227 = CARTESIAN_POINT ( 'NONE', ( 35.98558651679125800, -30.43956886610814600, 23.64926786092913600 ) ) ; +#11228 = ORIENTED_EDGE ( 'NONE', *, *, #11774, .T. ) ; +#11229 = ADVANCED_FACE ( 'NONE', ( #11509 ), #121, .T. ) ; +#11230 = EDGE_CURVE ( 'NONE', #12800, #7223, #545, .T. ) ; +#11231 = CARTESIAN_POINT ( 'NONE', ( 37.49920225794715400, -26.96646896279989400, 6.958411588216212500 ) ) ; +#11232 = CARTESIAN_POINT ( 'NONE', ( 5.538079236920491000, -31.12201595940873800, 24.50313823674400000 ) ) ; +#11233 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999987100, -21.22604312769969300, 7.833118756498936200 ) ) ; +#11234 = ORIENTED_EDGE ( 'NONE', *, *, #3791, .F. ) ; +#11235 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -10.21539878535249600, -25.03798061746947200 ) ) ; +#11236 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11237 = CARTESIAN_POINT ( 'NONE', ( 3.617908211974954400, -28.90572289813921000, 22.05734579188270300 ) ) ; +#11238 = CARTESIAN_POINT ( 'NONE', ( 22.47955438550423000, -30.66267912178171400, 28.85661217710847400 ) ) ; +#11239 = EDGE_LOOP ( 'NONE', ( #513, #5299, #2656, #13890 ) ) ; +#11240 = CARTESIAN_POINT ( 'NONE', ( 31.63564095993452700, -31.02352997509417400, 26.72018538572969200 ) ) ; +#11241 = CARTESIAN_POINT ( 'NONE', ( 30.95997899055310000, -11.68851227831362900, -25.00000000000000000 ) ) ; +#11242 = CARTESIAN_POINT ( 'NONE', ( 28.83675196869640400, -30.81915651986866000, 27.90920905450979500 ) ) ; +#11243 = CARTESIAN_POINT ( 'NONE', ( 36.87527991298396300, -30.37642290174836300, 21.56015515985821900 ) ) ; +#11244 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -90.07596123493894400, 15.95758058754439400 ) ) ; +#11245 = CARTESIAN_POINT ( 'NONE', ( 15.21766512260468200, -12.50000000000004800, -13.02451504181016900 ) ) ; +#11246 = CARTESIAN_POINT ( 'NONE', ( 15.09278918229691900, -12.50000000000000200, 8.261166047900559300 ) ) ; +#11247 = ORIENTED_EDGE ( 'NONE', *, *, #5621, .F. ) ; +#11248 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, -25.63802908547507900 ) ) ; +#11249 = FACE_OUTER_BOUND ( 'NONE', #10055, .T. ) ; +#11250 = CARTESIAN_POINT ( 'NONE', ( 4.270754989340556300, -30.89218248343894000, 23.03768996135763200 ) ) ; +#11251 = CARTESIAN_POINT ( 'NONE', ( 2.544588105355102000, -10.00000000000000000, 17.31364324773965500 ) ) ; +#11252 = ORIENTED_EDGE ( 'NONE', *, *, #7812, .F. ) ; +#11253 = CARTESIAN_POINT ( 'NONE', ( 30.87607373513899100, -21.21150769042144200, -21.20476277078885700 ) ) ; +#11254 = CARTESIAN_POINT ( 'NONE', ( 5.083885619671882200, -35.31363816629309600, 13.85523139814301400 ) ) ; +#11255 = CARTESIAN_POINT ( 'NONE', ( 34.15124616858386000, -31.14606492185244900, 24.80504046898571200 ) ) ; +#11256 = CARTESIAN_POINT ( 'NONE', ( 23.64646667860244400, -12.49999999999999600, 9.854597180078380700 ) ) ; +#11257 = CARTESIAN_POINT ( 'NONE', ( 33.50279610356945900, -31.16677951295061500, 25.37844502126069600 ) ) ; +#11258 = CIRCLE ( 'NONE', #862, 2.500000000000000900 ) ; +#11259 = VERTEX_POINT ( 'NONE', #2036 ) ; +#11260 = CARTESIAN_POINT ( 'NONE', ( 6.073083950199878300, -19.04813312838444300, 18.19915054177165500 ) ) ; +#11261 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11262 = CARTESIAN_POINT ( 'NONE', ( 26.28858134297357600, -39.19832374357609000, 19.36809462730455800 ) ) ; +#11263 = CYLINDRICAL_SURFACE ( 'NONE', #930, 1.200000000000006600 ) ; +#11264 = CARTESIAN_POINT ( 'NONE', ( 6.992412544150031600, -30.72941876705883100, 26.08797812576562300 ) ) ; +#11265 = CARTESIAN_POINT ( 'NONE', ( 30.80850665730461200, -100.0000000000000100, 3.447248114129469500 ) ) ; +#11266 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999986700, -95.07596123493894400, 11.50239124669686000 ) ) ; +#11267 = CARTESIAN_POINT ( 'NONE', ( 8.325379266424514300, -30.35318150785777300, 26.98033384959907700 ) ) ; +#11268 = CARTESIAN_POINT ( 'NONE', ( 10.18300305790871900, -11.28153743231911900, -25.05146699138794000 ) ) ; +#11269 = CARTESIAN_POINT ( 'NONE', ( 37.49270515374134000, -21.19040198129462000, 8.286818234478987600 ) ) ; +#11270 = CARTESIAN_POINT ( 'NONE', ( 29.55550453151544200, -30.66882593769659200, 27.70307080002542200 ) ) ; +#11271 = CARTESIAN_POINT ( 'NONE', ( 2.500609675519126700, -27.20800769793664400, 7.538732124992434600 ) ) ; +#11272 = CARTESIAN_POINT ( 'NONE', ( 8.932116367646070600, -30.55940700135566200, 27.12964230195677100 ) ) ; +#11273 = CARTESIAN_POINT ( 'NONE', ( 35.45519615661389400, -29.13194599420748100, 23.69671310708668000 ) ) ; +#11274 = FACE_OUTER_BOUND ( 'NONE', #12354, .T. ) ; +#11275 = ORIENTED_EDGE ( 'NONE', *, *, #9720, .F. ) ; +#11276 = CARTESIAN_POINT ( 'NONE', ( 27.04941352502764200, -30.77347774677197000, 28.36758194924809500 ) ) ; +#11277 = EDGE_CURVE ( 'NONE', #8998, #7893, #3617, .T. ) ; +#11278 = CARTESIAN_POINT ( 'NONE', ( 23.56880052302632200, -19.09656950023016000, 23.39602936521979300 ) ) ; +#11279 = CARTESIAN_POINT ( 'NONE', ( 5.224028219598367600, -30.38846593245887100, 24.97951911617513000 ) ) ; +#11280 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -12.60472266500385900, -10.22788370481685900 ) ) ; +#11281 = VERTEX_POINT ( 'NONE', #9847 ) ; +#11282 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #8179, #7866, ( #12290 ) ) ; +#11283 = CARTESIAN_POINT ( 'NONE', ( 6.502446351117154900, -23.32393243032589300, 13.47419516850559700 ) ) ; +#11284 = CARTESIAN_POINT ( 'NONE', ( 37.66036814269760000, -30.33990989768570800, 22.98912240559397800 ) ) ; +#11285 = CARTESIAN_POINT ( 'NONE', ( 2.847968358916297400, -30.19909770561670800, 21.97397603556948900 ) ) ; +#11286 = CIRCLE ( 'NONE', #6750, 2.499999999999999100 ) ; +#11287 = EDGE_LOOP ( 'NONE', ( #5346, #1134, #11621, #14220, #7975, #7953 ) ) ; +#11288 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -31.29892962639993600, 28.74442404665491000 ) ) ; +#11289 = CARTESIAN_POINT ( 'NONE', ( 31.54926472344556700, -30.33862430147003100, 26.91321922269882400 ) ) ; +#11290 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000008000, -21.23105625617643700, 7.788262581895413200 ) ) ; +#11291 = CARTESIAN_POINT ( 'NONE', ( 28.83711760473967400, -30.83481620681154900, 27.90634133012265000 ) ) ; +#11292 = CARTESIAN_POINT ( 'NONE', ( 36.62007832763839600, -28.96328793695554500, 21.87194190713177700 ) ) ; +#11293 = CARTESIAN_POINT ( 'NONE', ( 25.93860902667660200, -27.29338863714286800, 21.55958822569674300 ) ) ; +#11294 = CARTESIAN_POINT ( 'NONE', ( 5.929784273060569400, -21.84447920899534500, -16.67538764787956800 ) ) ; +#11295 = CARTESIAN_POINT ( 'NONE', ( 5.629042981714683900, -23.04258510391385800, 11.45795357765811300 ) ) ; +#11296 = CARTESIAN_POINT ( 'NONE', ( 6.016988287798715100, -12.33070549068319000, -23.38274074672661100 ) ) ; +#11297 = ORIENTED_EDGE ( 'NONE', *, *, #5600, .T. ) ; +#11298 = EDGE_CURVE ( 'NONE', #4686, #12911, #11502, .T. ) ; +#11299 = CARTESIAN_POINT ( 'NONE', ( 3.650185332585852600, -29.92455045793777700, 23.42883158493550500 ) ) ; +#11300 = CARTESIAN_POINT ( 'NONE', ( 2.499919635099570000, -19.97016602489419400, 9.057336041640162700 ) ) ; +#11301 = ADVANCED_FACE ( 'NONE', ( #8890 ), #9897, .T. ) ; +#11302 = CARTESIAN_POINT ( 'NONE', ( 29.61718420342055000, -12.50000000000007300, -20.72142193707276500 ) ) ; +#11303 = CARTESIAN_POINT ( 'NONE', ( 2.521361612635065500, -27.95608274215046800, 7.441755464447323800 ) ) ; +#11304 = CARTESIAN_POINT ( 'NONE', ( 34.21101153272253700, -30.22651775990548700, 25.39421326171540700 ) ) ; +#11305 = AXIS2_PLACEMENT_3D ( 'NONE', #13054, #6346, #14156 ) ; +#11306 = CARTESIAN_POINT ( 'NONE', ( 28.49605476169349300, -24.02253292992859500, 18.46706219655991500 ) ) ; +#11307 = CARTESIAN_POINT ( 'NONE', ( 33.55754431125661300, -30.19319132854659300, 25.82038712086050600 ) ) ; +#11308 = VERTEX_POINT ( 'NONE', #14333 ) ; +#11309 = CARTESIAN_POINT ( 'NONE', ( 10.85465130893207300, -30.84403192925215700, 27.80962316907676500 ) ) ; +#11310 = CARTESIAN_POINT ( 'NONE', ( 7.557923632465987800, -19.47389238008545600, 19.58116126925970900 ) ) ; +#11311 = CARTESIAN_POINT ( 'NONE', ( 24.60362946163115400, -25.65044180571577200, 22.13088491445902800 ) ) ; +#11312 = CARTESIAN_POINT ( 'NONE', ( 24.99618017721871500, -12.50000000000007500, -12.13965565646480200 ) ) ; +#11313 = CARTESIAN_POINT ( 'NONE', ( 7.052727989107006900, -29.96562266056218200, 26.12722531904439900 ) ) ; +#11314 = CARTESIAN_POINT ( 'NONE', ( 39.98307054405714900, -10.06771782377138000, 10.87871461944594400 ) ) ; +#11315 = CARTESIAN_POINT ( 'NONE', ( 3.410935698530131300, -30.83722815353393500, 23.83830769736241400 ) ) ; +#11316 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -27.25937709767108100, 29.45670614745888500 ) ) ; +#11317 = EDGE_CURVE ( 'NONE', #7550, #8328, #8567, .T. ) ; +#11318 = CARTESIAN_POINT ( 'NONE', ( 37.47809861652874000, -20.36279229784646800, 8.810883214072031700 ) ) ; +#11319 = CARTESIAN_POINT ( 'NONE', ( 13.29279691331376300, -11.68860824032028100, 24.70225280738490200 ) ) ; +#11320 = CARTESIAN_POINT ( 'NONE', ( 9.048104022682002400, -31.03666191054291400, 27.05088906157272500 ) ) ; +#11321 = CARTESIAN_POINT ( 'NONE', ( 35.98615353480220600, -30.15791619620919300, 23.86502430304833700 ) ) ; +#11322 = EDGE_LOOP ( 'NONE', ( #11275, #1336, #2175, #8928, #9415, #4402, #8525, #5095, #1631, #12770 ) ) ; +#11323 = CARTESIAN_POINT ( 'NONE', ( 31.62813348341853000, -30.94302975632806600, 26.87513444777348300 ) ) ; +#11324 = CARTESIAN_POINT ( 'NONE', ( 24.19167448900666900, -18.67606454996612100, 23.44729586310607100 ) ) ; +#11325 = CARTESIAN_POINT ( 'NONE', ( 5.524840408243516500, -29.39868048738876600, 24.82200972598155500 ) ) ; +#11326 = CARTESIAN_POINT ( 'NONE', ( 6.165065711502661500, -12.49999999999990800, 14.93791314809786300 ) ) ; +#11327 = CARTESIAN_POINT ( 'NONE', ( 0.4681621600553404500, -11.87264864022128400, 8.047242463523611300 ) ) ; +#11328 = CARTESIAN_POINT ( 'NONE', ( 35.15264831887232300, -29.41858962257353500, 25.15319121266972100 ) ) ; +#11329 = CARTESIAN_POINT ( 'NONE', ( 3.405100008022366800, -29.03882003448533300, 22.19048570199899500 ) ) ; +#11330 = CARTESIAN_POINT ( 'NONE', ( 12.45252773853832600, -10.00000000000000000, 25.00000000000000000 ) ) ; +#11331 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122093500, 0.1736481776669240000 ) ) ; +#11332 = CARTESIAN_POINT ( 'NONE', ( 31.55818254318581900, -30.82652442886211500, 26.84638599374972000 ) ) ; +#11333 = CARTESIAN_POINT ( 'NONE', ( 30.69264082599105900, -11.99261116098797500, -24.99999999999999600 ) ) ; +#11334 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#11335 = CARTESIAN_POINT ( 'NONE', ( 37.38778050647400900, -30.00494213969919600, 21.68916449335248900 ) ) ; +#11336 = CARTESIAN_POINT ( 'NONE', ( 31.78792706191659100, -28.74795027108324800, 26.84943306683806700 ) ) ; +#11337 = CARTESIAN_POINT ( 'NONE', ( 5.316379568630186900, -12.49999999999919400, 12.67226463024069700 ) ) ; +#11338 = CARTESIAN_POINT ( 'NONE', ( 1.626034737763616600, -16.50413895105435100, 8.005331014629295100 ) ) ; +#11339 = CARTESIAN_POINT ( 'NONE', ( 4.294015875444713100, -29.07016365611415400, 23.34970645184507300 ) ) ; +#11340 = FACE_OUTER_BOUND ( 'NONE', #579, .T. ) ; +#11341 = CARTESIAN_POINT ( 'NONE', ( 14.56832700502114400, -19.57320768689958300, 23.05487293056752700 ) ) ; +#11342 = AXIS2_PLACEMENT_3D ( 'NONE', #6652, #59, #7798 ) ; +#11343 = CARTESIAN_POINT ( 'NONE', ( 23.93981041005628200, -12.49999999999999300, -14.07973895642322800 ) ) ; +#11344 = CARTESIAN_POINT ( 'NONE', ( 35.65436971089819500, -95.14102954326818900, 12.92977595461171300 ) ) ; +#11345 = CARTESIAN_POINT ( 'NONE', ( 34.01904801705760000, -31.10424848355595300, 24.99573992152447100 ) ) ; +#11346 = ORIENTED_EDGE ( 'NONE', *, *, #14072, .T. ) ; +#11347 = CARTESIAN_POINT ( 'NONE', ( 30.14297479416886100, -12.50000000000000500, 19.46430159006115400 ) ) ; +#11348 = CARTESIAN_POINT ( 'NONE', ( 33.47707577249426700, -31.01335574579239200, 25.55836964144825900 ) ) ; +#11349 = CARTESIAN_POINT ( 'NONE', ( 10.85500224654675900, -30.78094349225301900, 27.82110461169645900 ) ) ; +#11350 = CARTESIAN_POINT ( 'NONE', ( 9.624633837149414000, -19.79734640167388800, 21.01430438594654500 ) ) ; +#11351 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -30.22903959670250600, 26.39450799556718200 ) ) ; +#11352 = CARTESIAN_POINT ( 'NONE', ( 34.75290873747627500, -22.15734668116426300, -14.43121840929031800 ) ) ; +#11353 = CARTESIAN_POINT ( 'NONE', ( 7.324916531564723800, -31.01622024604410300, 26.12378044979868400 ) ) ; +#11354 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -21.23105625617651900, -11.53187062879839100 ) ) ; +#11355 = EDGE_CURVE ( 'NONE', #7173, #2348, #11857, .T. ) ; +#11356 = FACE_OUTER_BOUND ( 'NONE', #10543, .T. ) ; +#11357 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -95.07596123493894400, 15.95758058754439400 ) ) ; +#11358 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 5.018561128876299000, -19.99999999999999600 ) ) ; +#11359 = CARTESIAN_POINT ( 'NONE', ( 1.068387407666854900, -11.88768421387193900, 12.54739183238335100 ) ) ; +#11360 = CARTESIAN_POINT ( 'NONE', ( 37.49418325576653600, -19.56800313751232400, 9.848243419478157200 ) ) ; +#11361 = ORIENTED_EDGE ( 'NONE', *, *, #10176, .F. ) ; +#11362 = CARTESIAN_POINT ( 'NONE', ( 9.028950977764180800, -30.67408534746244800, 27.15863941368762400 ) ) ; +#11363 = CARTESIAN_POINT ( 'NONE', ( 35.45401597327194300, -30.96935881800047200, 23.37203356927990700 ) ) ; +#11364 = AXIS2_PLACEMENT_3D ( 'NONE', #7168, #6083, #13894 ) ; +#11365 = CARTESIAN_POINT ( 'NONE', ( 34.89134297491371900, -29.23668185895466800, 25.36077399300625100 ) ) ; +#11366 = ADVANCED_FACE ( 'NONE', ( #5876 ), #2113, .T. ) ; +#11367 = CARTESIAN_POINT ( 'NONE', ( 25.13438608053822800, -16.84369096063110400, 23.79327263600164600 ) ) ; +#11368 = CARTESIAN_POINT ( 'NONE', ( 5.647528723496954200, -30.70241265956859400, 25.12916109926195700 ) ) ; +#11369 = CARTESIAN_POINT ( 'NONE', ( 15.45638891530315800, -12.50000000000000500, 9.048921925328981400 ) ) ; +#11370 = CARTESIAN_POINT ( 'NONE', ( 39.99999999699856800, -10.00000000000000000, -11.53278959685733600 ) ) ; +#11371 = CARTESIAN_POINT ( 'NONE', ( 31.88848432154192700, -32.20398721861232600, 26.52492743992628700 ) ) ; +#11372 = EDGE_LOOP ( 'NONE', ( #13118, #2620, #5441, #1988 ) ) ; +#11373 = EDGE_CURVE ( 'NONE', #5973, #11717, #9347, .T. ) ; +#11374 = CARTESIAN_POINT ( 'NONE', ( 3.452438060643249900, -30.56418047064505200, 22.02985738308491300 ) ) ; +#11375 = CARTESIAN_POINT ( 'NONE', ( 17.58001375881492500, -25.57016451055399000, 22.25482071641792500 ) ) ; +#11376 = CARTESIAN_POINT ( 'NONE', ( 31.34029102272393200, -30.23469420663437300, 26.99759331890497500 ) ) ; +#11377 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#11378 = CARTESIAN_POINT ( 'NONE', ( 36.39759399313201300, -28.89901337442720600, 22.00245591625083500 ) ) ; +#11379 = CARTESIAN_POINT ( 'NONE', ( 15.84818654855863700, -100.0000000000000100, 6.546591031478622600 ) ) ; +#11380 = VERTEX_POINT ( 'NONE', #11139 ) ; +#11381 = CARTESIAN_POINT ( 'NONE', ( 31.72104399462601200, -20.59989299604013600, 19.91512993088354500 ) ) ; +#11382 = CARTESIAN_POINT ( 'NONE', ( 4.746764267067769400, -31.01185064984864700, 23.62442667003558900 ) ) ; +#11383 = CARTESIAN_POINT ( 'NONE', ( 3.948944944801339000, -30.27708155717055000, 23.71391793459507700 ) ) ; +#11384 = CARTESIAN_POINT ( 'NONE', ( 17.33234778127808100, -12.50000000000000400, -14.54982113999828100 ) ) ; +#11385 = CARTESIAN_POINT ( 'NONE', ( 40.00009375905048600, -9.999999999999996400, 9.226532922263576400 ) ) ; +#11386 = ORIENTED_EDGE ( 'NONE', *, *, #5355, .F. ) ; +#11387 = CARTESIAN_POINT ( 'NONE', ( 17.56600586350483800, -19.89077188230974600, 23.25601354586337200 ) ) ; +#11388 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, 12.00000000000000000, -19.99999999999999600 ) ) ; +#11389 = CARTESIAN_POINT ( 'NONE', ( 22.31280616483239100, -30.65917406624146200, 28.85723021296910300 ) ) ; +#11390 = CARTESIAN_POINT ( 'NONE', ( 29.24989270290993900, -21.03984128466110800, -22.43130146299522200 ) ) ; +#11391 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11392 = CARTESIAN_POINT ( 'NONE', ( 33.87160841612679700, -29.92813506327046400, 25.55216801966898600 ) ) ; +#11393 = ORIENTED_EDGE ( 'NONE', *, *, #11584, .F. ) ; +#11394 = CARTESIAN_POINT ( 'NONE', ( 23.88518774404149200, -12.50000000000002300, 9.709745189022157800 ) ) ; +#11395 = EDGE_CURVE ( 'NONE', #10708, #11069, #1571, .T. ) ; +#11396 = CARTESIAN_POINT ( 'NONE', ( 33.30292668423758300, -29.87977706084367200, 25.88910260325616300 ) ) ; +#11397 = CARTESIAN_POINT ( 'NONE', ( 11.05969964598351000, -30.84449800741258900, 27.87342563629877300 ) ) ; +#11398 = CARTESIAN_POINT ( 'NONE', ( 10.96475300044642500, -20.07516903979135800, 21.71119160216799000 ) ) ; +#11399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#11400 = CARTESIAN_POINT ( 'NONE', ( 34.32976560530691800, -12.49999999999954000, -14.64374058727258700 ) ) ; +#11401 = CARTESIAN_POINT ( 'NONE', ( 5.095897765700061500, -22.72168332747261800, 9.153689285949056400 ) ) ; +#11402 = EDGE_LOOP ( 'NONE', ( #7012, #7181, #7391, #9644, #10161 ) ) ; +#11403 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, -11.53187062879840900 ) ) ; +#11404 = CARTESIAN_POINT ( 'NONE', ( 24.92185796542633700, -12.49999999999995400, 8.225020230554728000 ) ) ; +#11405 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -99.99999999999998600, -38.36942826376122900 ) ) ; +#11406 = CARTESIAN_POINT ( 'NONE', ( 37.40022431243653500, -18.87839825398816600, 11.40033145710127200 ) ) ; +#11407 = ORIENTED_EDGE ( 'NONE', *, *, #8673, .T. ) ; +#11408 = CARTESIAN_POINT ( 'NONE', ( 22.31280744310812000, -31.29913968154958300, 28.74438700826458900 ) ) ; +#11409 = CARTESIAN_POINT ( 'NONE', ( 9.048156094354887100, -30.32522151140977900, 27.17621957071667900 ) ) ; +#11410 = CARTESIAN_POINT ( 'NONE', ( 35.77687436721399200, -29.92038590236106200, 24.09468764912526600 ) ) ; +#11411 = VERTEX_POINT ( 'NONE', #13440 ) ; +#11412 = CARTESIAN_POINT ( 'NONE', ( 26.31128730422485900, -12.97040257446214900, 24.47623788255637900 ) ) ; +#11413 = CARTESIAN_POINT ( 'NONE', ( 5.716024874967559700, -29.76776702780608700, 25.21125825022708300 ) ) ; +#11414 = CARTESIAN_POINT ( 'NONE', ( -1.952069563939373700, -10.00000000000000400, 7.890944632215345100 ) ) ; +#11415 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1740, #1587, #8316, #1633, #9429, #2733, #10563, #3841, #11684, #4948, #12787, #6077, #13886, #7204, #584, #8359, #1682, #9478, #2779, #10617, #3894, #11731, #4995, #12842 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003007265029352673800, 0.006014530058705347600, 0.007518162573381682500, 0.009021795088058016600, 0.01202906011741070900, 0.01353269263208706400, 0.01503632514676341900, 0.01804359017611612300, 0.01954722269079247100, 0.02105085520546881600, 0.02405812023482150800 ), + .UNSPECIFIED. ) ; +#11416 = CARTESIAN_POINT ( 'NONE', ( 8.265091395604567700, -23.67000123812582800, 15.94775703040897100 ) ) ; +#11417 = CARTESIAN_POINT ( 'NONE', ( 4.179262562055551900, -10.00000000000000400, 22.36143813341286800 ) ) ; +#11418 = CARTESIAN_POINT ( 'NONE', ( 25.74164687877778900, -33.18407038829873600, 26.28654231693229400 ) ) ; +#11419 = ORIENTED_EDGE ( 'NONE', *, *, #9292, .T. ) ; +#11420 = CARTESIAN_POINT ( 'NONE', ( 2.907439498573934200, -29.39405692161771500, 22.22497699042753200 ) ) ; +#11421 = FACE_OUTER_BOUND ( 'NONE', #12013, .T. ) ; +#11422 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#11423 = CARTESIAN_POINT ( 'NONE', ( 31.36696870773521800, -30.69297941616924400, 26.97573673450711600 ) ) ; +#11424 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -9.897237155510822500E-015, 25.00000000000000000 ) ) ; +#11425 = CARTESIAN_POINT ( 'NONE', ( 37.46335088518773700, -29.69233772644539100, 21.85437300798106000 ) ) ; +#11426 = CARTESIAN_POINT ( 'NONE', ( 10.17828621111027400, -22.03500000000001400, 17.97367275716709000 ) ) ; +#11427 = VERTEX_POINT ( 'NONE', #3437 ) ; +#11428 = CARTESIAN_POINT ( 'NONE', ( 32.50556527517665000, -26.76021023298951500, 18.25982308917980000 ) ) ; +#11429 = CARTESIAN_POINT ( 'NONE', ( 6.750331888870154500, -31.16977810122536100, 25.58123420983756400 ) ) ; +#11430 = CARTESIAN_POINT ( 'NONE', ( 4.424613977002684000, -29.17221939538568500, 23.63460551171337800 ) ) ; +#11431 = CIRCLE ( 'NONE', #13238, 3.189999999999995100 ) ; +#11432 = EDGE_CURVE ( 'NONE', #4437, #11692, #6230, .T. ) ; +#11433 = CARTESIAN_POINT ( 'NONE', ( 27.41135756152892700, -12.27098359494557700, -25.40043568053529600 ) ) ; +#11434 = CARTESIAN_POINT ( 'NONE', ( 35.31892448111750600, -19.77259783685044100, 16.02398149413957600 ) ) ; +#11435 = ORIENTED_EDGE ( 'NONE', *, *, #9744, .T. ) ; +#11436 = CARTESIAN_POINT ( 'NONE', ( 27.41640404629845000, -11.87724389807648600, 24.55522993379390300 ) ) ; +#11437 = CYLINDRICAL_SURFACE ( 'NONE', #9048, 3.189999999999994200 ) ; +#11438 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #7714, #6573 ), + ( #8855, #2152 ), + ( #9974, #3262 ), + ( #11109, #4383 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.9897976766153485700, 0.9897976766153485700), + ( 0.9897976766153485700, 0.9897976766153485700), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#11439 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 9.934684141622256000 ) ) ; +#11440 = ADVANCED_FACE ( 'NONE', ( #5522 ), #7994, .T. ) ; +#11441 = CARTESIAN_POINT ( 'NONE', ( 16.83218747633028300, -12.49999999999998000, 10.07091128348490700 ) ) ; +#11442 = CARTESIAN_POINT ( 'NONE', ( 27.54756234523034300, -12.49999999999968900, -21.88362498436082500 ) ) ; +#11443 = EDGE_CURVE ( 'NONE', #3072, #13324, #14094, .T. ) ; +#11444 = CARTESIAN_POINT ( 'NONE', ( 37.69256326147594600, -10.00000000000000200, -23.48365129837367600 ) ) ; +#11445 = EDGE_LOOP ( 'NONE', ( #4861, #6698, #12084, #5496 ) ) ; +#11446 = CARTESIAN_POINT ( 'NONE', ( 30.71998415109970200, -23.80668122307313100, 16.92799626562301200 ) ) ; +#11447 = CARTESIAN_POINT ( 'NONE', ( 33.37653273648390200, -30.70900649741041400, 25.85332840956864300 ) ) ; +#11448 = CARTESIAN_POINT ( 'NONE', ( 11.06047759332453300, -30.81377308646057900, 27.87925658760380500 ) ) ; +#11449 = CARTESIAN_POINT ( 'NONE', ( 12.74880887037652500, -19.16544172836279000, 22.64875076574826100 ) ) ; +#11450 = CARTESIAN_POINT ( 'NONE', ( 15.15653469400065700, -12.49999999999999300, -12.87089795424564500 ) ) ; +#11451 = CARTESIAN_POINT ( 'NONE', ( 24.89277261326693100, -12.49999999999998000, -12.71927581715563200 ) ) ; +#11452 = CIRCLE ( 'NONE', #3144, 7.499999999999998200 ) ; +#11453 = CARTESIAN_POINT ( 'NONE', ( 4.899255864983418400, -12.49999999999994300, 10.09199071888665400 ) ) ; +#11454 = ORIENTED_EDGE ( 'NONE', *, *, #14252, .T. ) ; +#11455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11456 = CARTESIAN_POINT ( 'NONE', ( 6.800783938885050600, -95.07596123493894400, 14.11443385164757000 ) ) ; +#11457 = CARTESIAN_POINT ( 'NONE', ( 36.54191467843070700, -20.78166300558335800, 13.24731292780659900 ) ) ; +#11458 = CARTESIAN_POINT ( 'NONE', ( 32.52834457311032400, -10.00000000000000000, -26.14585536141011700 ) ) ; +#11459 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11460 = CARTESIAN_POINT ( 'NONE', ( 9.228987102544175900, -30.76778872321456100, 27.22617478875123400 ) ) ; +#11461 = CARTESIAN_POINT ( 'NONE', ( 35.43834485495881400, -30.88738376302434900, 23.65431704047576400 ) ) ; +#11462 = CARTESIAN_POINT ( 'NONE', ( 13.30528969643077100, -31.06759886309055600, 28.41185479211663200 ) ) ; +#11463 = EDGE_CURVE ( 'NONE', #10364, #9095, #10614, .T. ) ; +#11464 = VECTOR ( 'NONE', #14041, 1000.000000000000000 ) ; +#11465 = ORIENTED_EDGE ( 'NONE', *, *, #6929, .F. ) ; +#11466 = CARTESIAN_POINT ( 'NONE', ( 14.96996094593346300, -19.96530867676110100, 23.02462242810851800 ) ) ; +#11467 = CARTESIAN_POINT ( 'NONE', ( 5.949056363856125400, -31.04086162865012000, 25.04770606303962700 ) ) ; +#11468 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11144, #8843, #5518, #13354, #6653, #61, #7799, #1149, #8933, #2233, #10057, #3343, #11191, #4466 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003835240063735763400, 0.005752860095603642500, 0.007670480127471523300, 0.01150572019120727500, 0.01342334022307515100, 0.01534096025494302900 ), + .UNSPECIFIED. ) ; +#11469 = CARTESIAN_POINT ( 'NONE', ( 2.185133262090922700, -11.92747418448639800, -19.08876031342022400 ) ) ; +#11470 = CARTESIAN_POINT ( 'NONE', ( 17.47572162347327000, -28.77904422273029200, 29.18874783161530600 ) ) ; +#11471 = VERTEX_POINT ( 'NONE', #8230 ) ; +#11472 = CARTESIAN_POINT ( 'NONE', ( 3.850319444844728400, -30.75268561047662200, 22.30765021586993100 ) ) ; +#11473 = CARTESIAN_POINT ( 'NONE', ( 31.33893000713773000, -31.07174044808830300, 26.84699561020546800 ) ) ; +#11474 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -19.48143887112369700 ) ) ; +#11475 = CARTESIAN_POINT ( 'NONE', ( 36.39944250639544500, -30.60712856649660600, 21.70094918120437900 ) ) ; +#11476 = FACE_OUTER_BOUND ( 'NONE', #3346, .T. ) ; +#11477 = CARTESIAN_POINT ( 'NONE', ( 6.855687943002071600, -100.0000000000000100, 0.5869512781180533700 ) ) ; +#11478 = CARTESIAN_POINT ( 'NONE', ( 37.12658811197195500, -28.72652910257395600, 18.99678636994243400 ) ) ; +#11479 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999998900, -22.50000000000001400, 7.564513562858112800 ) ) ; +#11480 = CARTESIAN_POINT ( 'NONE', ( 9.048209205999993900, -31.03769255554809400, 27.05046685828880700 ) ) ; +#11481 = EDGE_CURVE ( 'NONE', #10377, #5768, #10448, .T. ) ; +#11482 = CARTESIAN_POINT ( 'NONE', ( 4.232206577858257800, -30.65831552664095500, 23.63608731064282200 ) ) ; +#11483 = CARTESIAN_POINT ( 'NONE', ( 34.99090361486008800, -11.07552010619313200, -25.18964321306107500 ) ) ; +#11484 = CARTESIAN_POINT ( 'NONE', ( 40.00000001105099300, -10.00000000000000400, -11.53324907983974200 ) ) ; +#11485 = ORIENTED_EDGE ( 'NONE', *, *, #12636, .F. ) ; +#11486 = CARTESIAN_POINT ( 'NONE', ( 11.14775477003038700, -10.07168435256892300, -25.00000000000119700 ) ) ; +#11487 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999998900, -12.50000000000001100, 7.564513562858116400 ) ) ; +#11488 = CARTESIAN_POINT ( 'NONE', ( 23.45205723650981600, -12.50000000000001200, -14.35555421024884600 ) ) ; +#11489 = CARTESIAN_POINT ( 'NONE', ( 34.06014472881293600, -10.00000000000043500, -23.52106732301703200 ) ) ; +#11490 = CARTESIAN_POINT ( 'NONE', ( 32.27028052119307200, -12.50000000000018800, 17.39435904136404100 ) ) ; +#11491 = CARTESIAN_POINT ( 'NONE', ( 33.16422808111059300, -29.72415665789219500, 25.90444834136020400 ) ) ; +#11492 = CARTESIAN_POINT ( 'NONE', ( 11.05966213204919600, -30.78692713235373900, 27.88355489374268700 ) ) ; +#11493 = CARTESIAN_POINT ( 'NONE', ( 14.22337043642694700, -19.43991709409817800, 22.98818957511937500 ) ) ; +#11494 = CARTESIAN_POINT ( 'NONE', ( 5.545103563165639600, -21.99403429138624900, -15.60242183777065300 ) ) ; +#11495 = CARTESIAN_POINT ( 'NONE', ( 34.33892722023558300, -21.94412211135985700, -15.96136393628560400 ) ) ; +#11496 = CARTESIAN_POINT ( 'NONE', ( 15.06320447945280300, -12.50000000000002000, 8.140463671865999700 ) ) ; +#11497 = VERTEX_POINT ( 'NONE', #6979 ) ; +#11498 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 15.51856112887630200 ) ) ; +#11499 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999600, -94.71799171675971300, 18.78817770588234700 ) ) ; +#11500 = CARTESIAN_POINT ( 'NONE', ( 10.04616206590094200, -95.07596123494097600, 16.62916692337810800 ) ) ; +#11501 = EDGE_CURVE ( 'NONE', #9095, #5453, #9083, .T. ) ; +#11502 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2075, #3181, #12132, #5399, #13243, #6535 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.001064270059160668100, 0.002128540118321336200 ), + .UNSPECIFIED. ) ; +#11503 = CARTESIAN_POINT ( 'NONE', ( 35.54443478908918100, -20.04872283901312000, 15.58422393324616800 ) ) ; +#11504 = CARTESIAN_POINT ( 'NONE', ( 35.82971059029520000, -20.20130679021158200, -18.63034659535715300 ) ) ; +#11505 = CARTESIAN_POINT ( 'NONE', ( 2.162392059326969700, -11.92449542715258000, -19.04425119358415600 ) ) ; +#11506 = CARTESIAN_POINT ( 'NONE', ( 9.239450240041129800, -30.42974256166866500, 27.26146120686831500 ) ) ; +#11507 = CARTESIAN_POINT ( 'NONE', ( 35.49215556555908100, -29.50335149940194400, 24.09398070251520400 ) ) ; +#11508 = CARTESIAN_POINT ( 'NONE', ( 37.79857499854668400, -18.80570000581312200, 7.788262581895115700 ) ) ; +#11509 = FACE_OUTER_BOUND ( 'NONE', #13778, .T. ) ; +#11510 = ADVANCED_FACE ( 'NONE', ( #11021 ), #2648, .F. ) ; +#11511 = CARTESIAN_POINT ( 'NONE', ( 8.534194203325880000, -20.20284432626798900, 20.18875686865909800 ) ) ; +#11512 = CIRCLE ( 'NONE', #5631, 1.200000000000005700 ) ; +#11513 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524033900, 6.754920151478379400 ) ) ; +#11514 = CARTESIAN_POINT ( 'NONE', ( 5.793600836598322700, -30.19011288112478300, 25.39469472576504900 ) ) ; +#11515 = VERTEX_POINT ( 'NONE', #1604 ) ; +#11516 = CARTESIAN_POINT ( 'NONE', ( 26.52191205355950700, -24.14455349988518100, 19.33628442314853000 ) ) ; +#11517 = CARTESIAN_POINT ( 'NONE', ( 2.307436738520676700, -10.00000000000000000, -23.48365129837527500 ) ) ; +#11518 = CARTESIAN_POINT ( 'NONE', ( 17.44237873759179500, -27.96664356504567600, 27.45669629622856800 ) ) ; +#11519 = CARTESIAN_POINT ( 'NONE', ( 12.90274200893057200, -10.00000000000000000, -28.72114427675099100 ) ) ; +#11520 = CARTESIAN_POINT ( 'NONE', ( 2.901983620225030000, -29.80197555613448700, 22.47579679128376600 ) ) ; +#11521 = CARTESIAN_POINT ( 'NONE', ( 31.26767175980699800, -30.59902790933600500, 27.03689820734823000 ) ) ; +#11522 = CARTESIAN_POINT ( 'NONE', ( 17.44237873759179500, -27.96664356504568300, 27.45669629622856800 ) ) ; +#11523 = CARTESIAN_POINT ( 'NONE', ( 7.360581298621045900, -29.86922298191722500, 26.26660591629216400 ) ) ; +#11524 = CARTESIAN_POINT ( 'NONE', ( 37.21826516118544200, -29.35315700311555900, 21.96882966420100300 ) ) ; +#11525 = CARTESIAN_POINT ( 'NONE', ( 5.079444058923986200, -22.03500000000001400, 9.302463855119549800 ) ) ; +#11526 = CARTESIAN_POINT ( 'NONE', ( 37.02360215706896400, -24.45289896585391900, 11.11231218450634900 ) ) ; +#11527 = CARTESIAN_POINT ( 'NONE', ( 17.56133793030465300, -30.66176281334875100, 28.85677374700785700 ) ) ; +#11528 = PLANE ( 'NONE', #11620 ) ; +#11529 = ORIENTED_EDGE ( 'NONE', *, *, #10352, .T. ) ; +#11530 = CARTESIAN_POINT ( 'NONE', ( 4.232198262468174700, -29.51329818586453900, 23.83753120598614600 ) ) ; +#11531 = CARTESIAN_POINT ( 'NONE', ( 17.68719383516401000, -30.65917406624153300, 28.85723021296909300 ) ) ; +#11532 = CARTESIAN_POINT ( 'NONE', ( 2.499999999996152400, -94.86314242178463000, 13.79204890834871800 ) ) ; +#11533 = CARTESIAN_POINT ( 'NONE', ( 10.52776188172138200, -10.73158092994528300, -25.03926009640074200 ) ) ; +#11534 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11535 = CARTESIAN_POINT ( 'NONE', ( 11.37602186413381700, -28.14357552523270600, 26.50247038694614700 ) ) ; +#11536 = AXIS2_PLACEMENT_3D ( 'NONE', #14025, #7346, #718 ) ; +#11537 = CARTESIAN_POINT ( 'NONE', ( 26.92086530427683800, -20.87625462899296400, -23.59531069527956900 ) ) ; +#11538 = CARTESIAN_POINT ( 'NONE', ( 30.97033986560948500, -12.60019294807863100, -24.88868598539991000 ) ) ; +#11539 = CARTESIAN_POINT ( 'NONE', ( 24.33768566674802600, -12.50000000000000000, 9.313572300234559600 ) ) ; +#11540 = CARTESIAN_POINT ( 'NONE', ( 33.30294630642059400, -30.51243909518833400, 25.97598806977751500 ) ) ; +#11541 = ORIENTED_EDGE ( 'NONE', *, *, #10610, .F. ) ; +#11542 = CARTESIAN_POINT ( 'NONE', ( 11.16313490240577400, -30.82370567776615600, 27.90838015445646600 ) ) ; +#11543 = CARTESIAN_POINT ( 'NONE', ( 15.72480375779757700, -19.69602184550622700, 23.19193810610552100 ) ) ; +#11544 = CARTESIAN_POINT ( 'NONE', ( 5.706524137615604200, -12.50000000000031300, -14.74159971730739600 ) ) ; +#11545 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524034300, 6.754920151478381200 ) ) ; +#11546 = CARTESIAN_POINT ( 'NONE', ( 33.34046840805864100, -12.49999999999895000, -16.72837410397353600 ) ) ; +#11547 = EDGE_CURVE ( 'NONE', #6101, #13983, #4324, .T. ) ; +#11548 = CARTESIAN_POINT ( 'NONE', ( 10.85391907594729600, -20.24590035548051100, -25.50865966101898900 ) ) ; +#11549 = CARTESIAN_POINT ( 'NONE', ( 29.30374105623949500, -95.07596123493894400, 15.82717526022421200 ) ) ; +#11550 = CARTESIAN_POINT ( 'NONE', ( 29.14705491368409400, -30.74609949058134400, 27.82705231312841200 ) ) ; +#11551 = CARTESIAN_POINT ( 'NONE', ( 16.27456914506446100, -94.71789415309243100, 18.78842146187706100 ) ) ; +#11552 = VERTEX_POINT ( 'NONE', #11654 ) ; +#11553 = CARTESIAN_POINT ( 'NONE', ( 34.48876929224058300, -19.49532625451447400, 17.32242708556023600 ) ) ; +#11554 = CARTESIAN_POINT ( 'NONE', ( 9.334416411184234300, -30.90323083167214700, 27.23161476563454300 ) ) ; +#11555 = CARTESIAN_POINT ( 'NONE', ( 35.62048554354315400, -30.55865139181463900, 24.01734308061854200 ) ) ; +#11556 = ORIENTED_EDGE ( 'NONE', *, *, #13937, .F. ) ; +#11557 = CARTESIAN_POINT ( 'NONE', ( 17.64523662643411200, -30.65997555879709300, 28.85708888820670700 ) ) ; +#11558 = CARTESIAN_POINT ( 'NONE', ( 2.531201802008676200, -21.14756337458482700, 8.808909535047538600 ) ) ; +#11559 = CARTESIAN_POINT ( 'NONE', ( 6.250105289814293900, -31.16274641395265700, 25.16784940526549600 ) ) ; +#11560 = VERTEX_POINT ( 'NONE', #5013 ) ; +#11561 = CARTESIAN_POINT ( 'NONE', ( 33.89198793273001100, -23.21469746891579400, 12.69513101324473500 ) ) ; +#11562 = CARTESIAN_POINT ( 'NONE', ( 6.736248463970333100, -12.39678711471958500, -23.83302404275934800 ) ) ; +#11563 = CARTESIAN_POINT ( 'NONE', ( 9.256564508912340700, -97.48407595461705500, 20.80598184563555700 ) ) ; +#11564 = CARTESIAN_POINT ( 'NONE', ( 6.938893903907228400E-015, -10.00000000000000200, -11.53187062879840900 ) ) ; +#11565 = EDGE_CURVE ( 'NONE', #13983, #10364, #12038, .T. ) ; +#11566 = CARTESIAN_POINT ( 'NONE', ( 3.852054724520711300, -28.96981745506425900, 22.62268186995451600 ) ) ; +#11567 = EDGE_LOOP ( 'NONE', ( #10646, #5598, #11228, #11361 ) ) ; +#11568 = CARTESIAN_POINT ( 'NONE', ( 31.24593061840142400, -31.03574827647154100, 26.91144499642691900 ) ) ; +#11569 = CARTESIAN_POINT ( 'NONE', ( 0.01416892047263189200, 5.611715810591142900, -20.39445895443063600 ) ) ; +#11570 = CARTESIAN_POINT ( 'NONE', ( 7.466970232379194000, -30.75414178402908800, 26.35996608474975000 ) ) ; +#11571 = CARTESIAN_POINT ( 'NONE', ( 36.65325988356644900, -30.50507229255437000, 21.77045998659772500 ) ) ; +#11572 = ORIENTED_EDGE ( 'NONE', *, *, #6909, .F. ) ; +#11573 = CARTESIAN_POINT ( 'NONE', ( 22.48060092683113000, -33.18018381368934700, 28.41270817586501000 ) ) ; +#11574 = CARTESIAN_POINT ( 'NONE', ( 4.625601072255365800, -30.94965481891615200, 23.59179565232209100 ) ) ; +#11575 = CARTESIAN_POINT ( 'NONE', ( 9.544953639299611900, -11.40145399700922000, -24.99999999999999600 ) ) ; +#11576 = CARTESIAN_POINT ( 'NONE', ( 24.75334076405883700, -12.49999999999991300, -13.10113447027013000 ) ) ; +#11577 = CARTESIAN_POINT ( 'NONE', ( 27.90998582487849000, -18.43575985630182500, -26.48745206544384000 ) ) ; +#11578 = ADVANCED_FACE ( 'NONE', ( #6072 ), #1052, .F. ) ; +#11579 = CARTESIAN_POINT ( 'NONE', ( 6.386165179341635000, -29.14344339881898400, 26.16723136651897300 ) ) ; +#11580 = ORIENTED_EDGE ( 'NONE', *, *, #14349, .F. ) ; +#11581 = CARTESIAN_POINT ( 'NONE', ( 25.72246799594214300, -12.50000000000008900, -22.51850901054064700 ) ) ; +#11582 = CARTESIAN_POINT ( 'NONE', ( 26.03765820886023300, -19.17916945404869700, 22.99487613909871100 ) ) ; +#11583 = CARTESIAN_POINT ( 'NONE', ( 32.86561488669355000, -23.46875399483868200, 14.51171469513936100 ) ) ; +#11584 = EDGE_CURVE ( 'NONE', #1424, #11552, #367, .T. ) ; +#11585 = CARTESIAN_POINT ( 'NONE', ( 33.16387012223246000, -31.16798933476184500, 25.64932604295115200 ) ) ; +#11586 = CARTESIAN_POINT ( 'NONE', ( 2.703534110888754900, -29.30123510853296100, 17.08808682835996600 ) ) ; +#11587 = ORIENTED_EDGE ( 'NONE', *, *, #10155, .T. ) ; +#11588 = CARTESIAN_POINT ( 'NONE', ( 11.16277258876082500, -30.80801252465998600, 27.91104172493888300 ) ) ; +#11589 = CARTESIAN_POINT ( 'NONE', ( 17.23491301536434500, -19.94600444942843600, 23.25241629596235900 ) ) ; +#11590 = CARTESIAN_POINT ( 'NONE', ( 15.03129606343696500, -12.49999999999998600, -12.38763533547674800 ) ) ; +#11591 = CARTESIAN_POINT ( 'NONE', ( 34.68223770765105500, -22.10739997444123600, -14.78563022769573500 ) ) ; +#11592 = CARTESIAN_POINT ( 'NONE', ( 24.67381617074618600, -12.49999999999998800, -13.24594095215108200 ) ) ; +#11593 = VECTOR ( 'NONE', #9843, 1000.000000000000000 ) ; +#11594 = CARTESIAN_POINT ( 'NONE', ( 22.53437567152428400, -19.87369037688913000, 23.25900198739298100 ) ) ; +#11595 = CARTESIAN_POINT ( 'NONE', ( 31.54708285765548200, -95.07596123493894400, 16.00033144814225500 ) ) ; +#11596 = CARTESIAN_POINT ( 'NONE', ( 29.60686984932084800, -30.64843204243904400, 27.68671465873449800 ) ) ; +#11597 = EDGE_LOOP ( 'NONE', ( #7434, #9711, #10321, #9557 ) ) ; +#11598 = CARTESIAN_POINT ( 'NONE', ( 33.58262403035676200, -19.05801643828004500, 18.57952830240926900 ) ) ; +#11599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11600 = CARTESIAN_POINT ( 'NONE', ( 11.54384069375715400, -11.22508977301380300, 24.48743476800245100 ) ) ; +#11601 = CARTESIAN_POINT ( 'NONE', ( 9.330869819236852400, -30.58814678017720800, 27.29556301550376700 ) ) ; +#11602 = CARTESIAN_POINT ( 'NONE', ( 35.18554150815109700, -29.22248874635832300, 24.06364502894466600 ) ) ; +#11603 = ORIENTED_EDGE ( 'NONE', *, *, #7608, .T. ) ; +#11604 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, -19.48143887112369700 ) ) ; +#11605 = FACE_OUTER_BOUND ( 'NONE', #11287, .T. ) ; +#11606 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11607 = CARTESIAN_POINT ( 'NONE', ( 37.35842923422121200, -91.44578095652036600, -1.100220238167026100 ) ) ; +#11608 = CARTESIAN_POINT ( 'NONE', ( 6.057599198828214100, -30.44324612561812800, 25.55583771560202400 ) ) ; +#11609 = CARTESIAN_POINT ( 'NONE', ( 16.06018958994777900, -12.50000000000001800, 9.671564438714574100 ) ) ; +#11610 = CARTESIAN_POINT ( 'NONE', ( 9.888313911417313300, -9.999999999999998200, -24.92500689800327500 ) ) ; +#11611 = CARTESIAN_POINT ( 'NONE', ( 14.96996094593346300, -19.96530867676110100, 23.02462242810851800 ) ) ; +#11612 = CARTESIAN_POINT ( 'NONE', ( 4.170289409704809100, -20.20130679021152500, -18.63034659535721400 ) ) ; +#11613 = CARTESIAN_POINT ( 'NONE', ( 3.162641706173611800, -30.17209756867970000, 22.63798418089168500 ) ) ; +#11614 = ORIENTED_EDGE ( 'NONE', *, *, #6243, .F. ) ; +#11615 = CARTESIAN_POINT ( 'NONE', ( 31.06303725873782200, -30.46746394301335300, 27.13496214146775600 ) ) ; +#11616 = FACE_OUTER_BOUND ( 'NONE', #1298, .T. ) ; +#11617 = CARTESIAN_POINT ( 'NONE', ( 4.247134388395017400, -18.61951737828948300, -19.57976920318577600 ) ) ; +#11618 = CARTESIAN_POINT ( 'NONE', ( 7.509412627974303900, -30.06867936986261500, 26.40719568050807500 ) ) ; +#11619 = CARTESIAN_POINT ( 'NONE', ( 36.59476176701397100, -29.03910286146408700, 22.19252619680584000 ) ) ; +#11620 = AXIS2_PLACEMENT_3D ( 'NONE', #7145, #530, #8298 ) ; +#11621 = ORIENTED_EDGE ( 'NONE', *, *, #12046, .F. ) ; +#11622 = CARTESIAN_POINT ( 'NONE', ( 4.211202678145944800, -29.96419781222024500, 24.09591796112349700 ) ) ; +#11623 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11624 = LINE ( 'NONE', #5311, #11593 ) ; +#11625 = CARTESIAN_POINT ( 'NONE', ( 17.57428009966820400, -33.35320614276253800, 26.50719967098547900 ) ) ; +#11626 = CARTESIAN_POINT ( 'NONE', ( 24.11467475426230000, -19.13003119825540600, -26.60987083496239700 ) ) ; +#11627 = CARTESIAN_POINT ( 'NONE', ( 3.488978337070113500, -31.36247645288573000, 23.81250281265441500 ) ) ; +#11628 = ORIENTED_EDGE ( 'NONE', *, *, #10427, .F. ) ; +#11629 = CARTESIAN_POINT ( 'NONE', ( 23.13981109204675600, -12.49999999999999800, -14.46405686139472200 ) ) ; +#11630 = EDGE_CURVE ( 'NONE', #6575, #6960, #11415, .T. ) ; +#11631 = CARTESIAN_POINT ( 'NONE', ( 35.93272624086985400, -18.98621689348511800, 15.33756063015669100 ) ) ; +#11632 = CARTESIAN_POINT ( 'NONE', ( 34.50225779863267000, -12.49999999999968000, 13.28410141756827100 ) ) ; +#11633 = CARTESIAN_POINT ( 'NONE', ( 33.10988049782887500, -30.35561356324980100, 26.11025674485122400 ) ) ; +#11634 = CARTESIAN_POINT ( 'NONE', ( 2.925544459234652900, -30.79756603875379600, 9.733647318743514600 ) ) ; +#11635 = ORIENTED_EDGE ( 'NONE', *, *, #11432, .T. ) ; +#11636 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076456000, -30.82654731345000700, 27.93780948130459400 ) ) ; +#11637 = CARTESIAN_POINT ( 'NONE', ( 39.92224777120616600, 10.13028869250944000, 18.21135650822973100 ) ) ; +#11638 = CARTESIAN_POINT ( 'NONE', ( 27.67686377073020100, -20.91950215230380600, -23.28961909463449900 ) ) ; +#11639 = CIRCLE ( 'NONE', #12647, 2.499999999999997300 ) ; +#11640 = CARTESIAN_POINT ( 'NONE', ( 3.550532363144278700, -28.87042587368937800, 21.75716330057233300 ) ) ; +#11641 = CARTESIAN_POINT ( 'NONE', ( 36.14878914205522900, -94.71799171675967000, 14.39213543017579200 ) ) ; +#11642 = CARTESIAN_POINT ( 'NONE', ( 31.13453322928021500, -30.27696661826273300, 27.09296079760492400 ) ) ; +#11643 = CARTESIAN_POINT ( 'NONE', ( 7.296162173107998900, -99.99999999999998600, -33.00341147329400800 ) ) ; +#11644 = CARTESIAN_POINT ( 'NONE', ( 30.76667210362384000, -20.16153724312680500, 20.68640887055737900 ) ) ; +#11645 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.57596123416667000, 12.92974142702295900 ) ) ; +#11646 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11647 = CARTESIAN_POINT ( 'NONE', ( 9.638208302332190100, -30.97492834502642700, 27.33454253051484500 ) ) ; +#11648 = CARTESIAN_POINT ( 'NONE', ( 35.62211867199059200, -30.27059385205609100, 24.26238761523429900 ) ) ; +#11649 = ORIENTED_EDGE ( 'NONE', *, *, #10138, .T. ) ; +#11650 = CARTESIAN_POINT ( 'NONE', ( 39.97167428080927500, 9.894175532731914300, -16.11130155685650000 ) ) ; +#11651 = EDGE_CURVE ( 'NONE', #9588, #1596, #2636, .T. ) ; +#11652 = CARTESIAN_POINT ( 'NONE', ( 35.48794197524785700, -93.12096545595993300, 19.59007606333362300 ) ) ; +#11653 = ADVANCED_FACE ( 'NONE', ( #3799, #40 ), #13842, .F. ) ; +#11654 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 19.48143887112370700 ) ) ; +#11655 = CARTESIAN_POINT ( 'NONE', ( 34.62411512366805500, -10.03050931533361200, 22.83966867431630700 ) ) ; +#11656 = CARTESIAN_POINT ( 'NONE', ( 6.249606586820060100, -29.56453482802681500, 25.45034851917883500 ) ) ; +#11657 = CARTESIAN_POINT ( 'NONE', ( 39.52667170093452900, -11.89383339475282000, 7.888251064899275600 ) ) ; +#11658 = CARTESIAN_POINT ( 'NONE', ( 10.75010729709125100, -23.96015871533931100, 18.02312694528451700 ) ) ; +#11659 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -12.50000000000000400, -11.97268808056956300 ) ) ; +#11660 = CARTESIAN_POINT ( 'NONE', ( 22.40557478599585300, -19.87093624336284800, 23.25948761544214000 ) ) ; +#11661 = CARTESIAN_POINT ( 'NONE', ( -1.016352165993317000E-006, -10.00000000000001800, 8.020573187382686000 ) ) ; +#11662 = ORIENTED_EDGE ( 'NONE', *, *, #3920, .T. ) ; +#11663 = CARTESIAN_POINT ( 'NONE', ( 31.06303815743345700, -30.88936774831342900, 27.06057198764274600 ) ) ; +#11664 = CARTESIAN_POINT ( 'NONE', ( 3.550532363144278700, -28.87042587368937800, 21.75716330057233300 ) ) ; +#11665 = CARTESIAN_POINT ( 'NONE', ( 7.883408923502193100, -31.00945674408343700, 26.46595633017267000 ) ) ; +#11666 = CARTESIAN_POINT ( 'NONE', ( 37.15211220069842600, -30.19880989369693600, 21.97256980427236800 ) ) ; +#11667 = CARTESIAN_POINT ( 'NONE', ( 22.49264576486651300, -27.96523496585092200, 27.45710953202296900 ) ) ; +#11668 = EDGE_CURVE ( 'NONE', #5768, #1596, #13913, .T. ) ; +#11669 = CARTESIAN_POINT ( 'NONE', ( 4.746764267067769400, -31.01185064984864700, 23.62442667003558900 ) ) ; +#11670 = CARTESIAN_POINT ( 'NONE', ( 40.00000002370809000, -10.00000001099950700, -12.92656167109409000 ) ) ; +#11671 = CARTESIAN_POINT ( 'NONE', ( 39.15245663027580000, -11.40743466240769300, -15.75206557626453500 ) ) ; +#11672 = CARTESIAN_POINT ( 'NONE', ( 22.86345895167992700, -19.58906135018995800, 23.30918976429283500 ) ) ; +#11673 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, -19.74219049453696700 ) ) ; +#11674 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, -22.46243069294108000, -27.19746277637472100 ) ) ; +#11675 = DIRECTION ( 'NONE', ( -6.938893903907229400E-016, 3.469446951953613700E-016, -1.000000000000000000 ) ) ; +#11676 = CARTESIAN_POINT ( 'NONE', ( 24.61306105213480700, -20.78865344522933300, -24.21957608277173100 ) ) ; +#11677 = CARTESIAN_POINT ( 'NONE', ( 37.49549336703183400, -27.46512202100966600, 9.266276941823417000 ) ) ; +#11678 = ORIENTED_EDGE ( 'NONE', *, *, #3249, .T. ) ; +#11679 = CARTESIAN_POINT ( 'NONE', ( 24.79840121052204800, -12.49999999999996400, 8.578272529237800400 ) ) ; +#11680 = CARTESIAN_POINT ( 'NONE', ( 33.02458179675479500, -31.05886441146367400, 25.85340419489255500 ) ) ; +#11681 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 1, + ( #4354, #11078 ), + .UNSPECIFIED., .F., .F., + ( 2, 2 ), + ( 0.1195002238509279300, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#11682 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -27.09143239524032900, 6.754920151478383000 ) ) ; +#11683 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001400, 27.93780948130459400 ) ) ; +#11684 = CARTESIAN_POINT ( 'NONE', ( 30.53555534602876500, -22.27644999305374500, -24.80453436656077000 ) ) ; +#11685 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -91.87370306964651000, -1.973360450122161800 ) ) ; +#11686 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#11687 = FACE_OUTER_BOUND ( 'NONE', #13305, .T. ) ; +#11688 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 10.00000000000000000, -19.99999999999999600 ) ) ; +#11689 = CARTESIAN_POINT ( 'NONE', ( 33.30856056773605200, -29.68186681364266700, 25.79600025802153600 ) ) ; +#11690 = CARTESIAN_POINT ( 'NONE', ( 16.66663500514976400, -99.99999999999998600, -38.36942826376122200 ) ) ; +#11691 = CARTESIAN_POINT ( 'NONE', ( 29.49744677764135800, -19.77351294068505500, 21.51781295516728000 ) ) ; +#11692 = VERTEX_POINT ( 'NONE', #678 ) ; +#11693 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11694 = CARTESIAN_POINT ( 'NONE', ( 35.91090181878723100, -20.65534660521321800, 14.76844212586872400 ) ) ; +#11695 = CARTESIAN_POINT ( 'NONE', ( 9.630237237181985300, -30.71100923783414100, 27.40199046845225100 ) ) ; +#11696 = CARTESIAN_POINT ( 'NONE', ( 35.16663925877971800, -31.02752411593077400, 23.72875346610523900 ) ) ; +#11697 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -95.19591800739858900, 10.91472003790388700 ) ) ; +#11698 = CARTESIAN_POINT ( 'NONE', ( 29.02822049176703700, -97.49637904390672800, 21.28619212682432500 ) ) ; +#11699 = CARTESIAN_POINT ( 'NONE', ( 26.70720308668626000, -11.68860824032027400, 24.70225280738490500 ) ) ; +#11700 = CARTESIAN_POINT ( 'NONE', ( 5.641259305314394000, -21.42462505051200200, 17.12060295521554600 ) ) ; +#11701 = CARTESIAN_POINT ( 'NONE', ( 29.87092960227578300, -8.814048761885295800, 25.00000000000000000 ) ) ; +#11702 = CARTESIAN_POINT ( 'NONE', ( 6.173140792280638500, -30.68041518387671800, 25.54450791398369300 ) ) ; +#11703 = CIRCLE ( 'NONE', #3549, 1.200000000000012600 ) ; +#11704 = CARTESIAN_POINT ( 'NONE', ( 40.00000101636550200, -10.00000000000004400, 8.020573308582983800 ) ) ; +#11705 = CARTESIAN_POINT ( 'NONE', ( 11.01252157016278200, -12.50000000000116400, 20.26276716624371200 ) ) ; +#11706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#11707 = CARTESIAN_POINT ( 'NONE', ( 39.92224777120617300, 10.13028869250943800, 0.7113565082297224100 ) ) ; +#11708 = ORIENTED_EDGE ( 'NONE', *, *, #11192, .F. ) ; +#11709 = CARTESIAN_POINT ( 'NONE', ( 0.4764148142566596600, -11.89318924366186500, 8.336464715781447800 ) ) ; +#11710 = CARTESIAN_POINT ( 'NONE', ( 30.95426198727334100, -30.35157665006734400, 27.17720104175391800 ) ) ; +#11711 = CARTESIAN_POINT ( 'NONE', ( 14.06156865232688300, -27.29338901791212600, 21.55963004007786700 ) ) ; +#11712 = CARTESIAN_POINT ( 'NONE', ( 7.853104940568338000, -30.40916335578009500, 26.62907903038472000 ) ) ; +#11713 = CARTESIAN_POINT ( 'NONE', ( 36.28450695945972600, -28.93570356061130200, 22.32451117266045800 ) ) ; +#11714 = CARTESIAN_POINT ( 'NONE', ( 4.278470927386471200, -30.25305643322460000, 24.15739322884069300 ) ) ; +#11715 = CARTESIAN_POINT ( 'NONE', ( 16.69398289724950900, -32.11937065052712400, 21.11003699855855900 ) ) ; +#11716 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#11717 = VERTEX_POINT ( 'NONE', #7304 ) ; +#11718 = CARTESIAN_POINT ( 'NONE', ( 34.68671926839810700, -100.0000000000000100, -3.238776261381146600 ) ) ; +#11719 = CARTESIAN_POINT ( 'NONE', ( 29.55501925519524800, -30.80206374286811100, 27.68373963617326400 ) ) ; +#11720 = CARTESIAN_POINT ( 'NONE', ( 36.00353618480757200, -100.0000000000000700, 18.05877560996897900 ) ) ; +#11721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11722 = ADVANCED_FACE ( 'NONE', ( #12064 ), #1773, .F. ) ; +#11723 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -30.66316004106086600, 28.85652737806401900 ) ) ; +#11724 = CARTESIAN_POINT ( 'NONE', ( 23.23954850897180100, -12.49999999999948000, -22.92483051085174500 ) ) ; +#11725 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, -11.53187062879839400 ) ) ; +#11726 = EDGE_LOOP ( 'NONE', ( #9188, #3406, #12420, #4063 ) ) ; +#11727 = CARTESIAN_POINT ( 'NONE', ( 34.16801622319162100, -23.12159185482287100, 12.02676767591606000 ) ) ; +#11728 = CARTESIAN_POINT ( 'NONE', ( 32.96821335954353300, -30.05913348503978000, 26.14435135694949300 ) ) ; +#11729 = CARTESIAN_POINT ( 'NONE', ( 2.399478512060107400, -19.59791404824027700, -11.53187062879840900 ) ) ; +#11730 = DIRECTION ( 'NONE', ( 1.387778780781445700E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11731 = CARTESIAN_POINT ( 'NONE', ( 37.40605689722652000, -21.39350282940976900, -13.73955824380921700 ) ) ; +#11732 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57596123493894400, 11.50239124669685300 ) ) ; +#11733 = CARTESIAN_POINT ( 'NONE', ( 17.64039537637300400, -27.96255689439422200, 27.45771657700752400 ) ) ; +#11734 = EDGE_CURVE ( 'NONE', #10401, #7194, #3468, .T. ) ; +#11735 = DIRECTION ( 'NONE', ( 0.9655914505931206800, 0.0000000000000000000, -0.2600637432274496300 ) ) ; +#11736 = CARTESIAN_POINT ( 'NONE', ( 35.19407353807061900, -29.19142595649469000, 24.01850554145659800 ) ) ; +#11737 = CARTESIAN_POINT ( 'NONE', ( 28.16363934823651100, -19.44774790923061800, 22.22170185132522500 ) ) ; +#11738 = EDGE_LOOP ( 'NONE', ( #4732, #4749, #4872 ) ) ; +#11739 = DIRECTION ( 'NONE', ( -0.01909913463907094900, -0.9998175948922076700, 0.0000000000000000000 ) ) ; +#11740 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #7933 ) ) ; +#11741 = CARTESIAN_POINT ( 'NONE', ( 25.03003990485839100, -19.96530868863710900, 23.02462227818016400 ) ) ; +#11742 = CARTESIAN_POINT ( 'NONE', ( 9.638636448568497900, -30.47351374898214300, 27.42184632477623700 ) ) ; +#11743 = CARTESIAN_POINT ( 'NONE', ( 35.58692668276938800, -30.00807695325498900, 24.31631784623563400 ) ) ; +#11744 = CARTESIAN_POINT ( 'NONE', ( 35.86489895712847400, -94.52969920337912400, 7.491482714606101800 ) ) ; +#11745 = CARTESIAN_POINT ( 'NONE', ( 23.54488161931416100, -94.74682992291350600, 18.71443453788060700 ) ) ; +#11746 = CARTESIAN_POINT ( 'NONE', ( 28.78627069876984000, -11.10548149500841200, 24.44268225136573800 ) ) ; +#11747 = ORIENTED_EDGE ( 'NONE', *, *, #10237, .F. ) ; +#11748 = CARTESIAN_POINT ( 'NONE', ( 2.197822621751739800, -18.79852560507696100, 7.708027464128584000 ) ) ; +#11749 = CARTESIAN_POINT ( 'NONE', ( 6.266179379989140800, -29.77356530709690600, 25.57561688197815300 ) ) ; +#11750 = CARTESIAN_POINT ( 'NONE', ( 41.94839026574324200, -10.00000000000000500, 8.385020346398539100 ) ) ; +#11751 = CARTESIAN_POINT ( 'NONE', ( 16.54794276348990000, -12.50000000000000500, 9.947379692537262800 ) ) ; +#11752 = CARTESIAN_POINT ( 'NONE', ( 13.29279691331376300, -11.68860824032028100, 24.70225280738490200 ) ) ; +#11753 = ORIENTED_EDGE ( 'NONE', *, *, #5411, .T. ) ; +#11754 = EDGE_CURVE ( 'NONE', #12287, #6987, #2432, .T. ) ; +#11755 = VECTOR ( 'NONE', #856, 1000.000000000000000 ) ; +#11756 = CARTESIAN_POINT ( 'NONE', ( -1.801933885252042300, -9.999999999999994700, 10.48612516405834300 ) ) ; +#11757 = CARTESIAN_POINT ( 'NONE', ( 30.97043069242630200, -30.74633938185855400, 27.14467917496829200 ) ) ; +#11758 = CARTESIAN_POINT ( 'NONE', ( 10.67149531357121700, -20.25874749835754300, 21.55085345908089400 ) ) ; +#11759 = CARTESIAN_POINT ( 'NONE', ( 8.091165644067471500, -31.11459587626450200, 26.51955453541160800 ) ) ; +#11760 = CARTESIAN_POINT ( 'NONE', ( 37.31040121158949300, -29.86684257446997700, 22.14302295195894000 ) ) ; +#11761 = ORIENTED_EDGE ( 'NONE', *, *, #5062, .F. ) ; +#11762 = CARTESIAN_POINT ( 'NONE', ( 4.727238391390727700, -29.20122625968834700, 23.96028595025342900 ) ) ; +#11763 = CARTESIAN_POINT ( 'NONE', ( 10.91298476915279500, -32.89644138586469800, 27.36867768153883100 ) ) ; +#11764 = CARTESIAN_POINT ( 'NONE', ( 37.42009534516165600, -89.96976285135603700, -2.469206202559079500 ) ) ; +#11765 = CARTESIAN_POINT ( 'NONE', ( 37.89139706436370900, -10.02759778871515600, 19.25175051501460300 ) ) ; +#11766 = EDGE_LOOP ( 'NONE', ( #13444, #13571 ) ) ; +#11767 = CARTESIAN_POINT ( 'NONE', ( 32.46242584221887700, -22.03500000000001400, 15.34739299205525300 ) ) ; +#11768 = CARTESIAN_POINT ( 'NONE', ( 29.24855593300791400, -30.72469154769260100, 27.79644250101176400 ) ) ; +#11769 = CARTESIAN_POINT ( 'NONE', ( 29.68256521388328700, -97.40649683660852500, 21.12924624542764500 ) ) ; +#11770 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#11771 = CARTESIAN_POINT ( 'NONE', ( 37.88247429062040800, -11.91741274050320400, -18.95475523009077500 ) ) ; +#11772 = CARTESIAN_POINT ( 'NONE', ( -1.256439632392267500E-016, -94.74682992296712300, 18.71443453778741500 ) ) ; +#11773 = CARTESIAN_POINT ( 'NONE', ( 34.93864731385610900, -12.50000000000041400, 11.50564164265471200 ) ) ; +#11774 = EDGE_CURVE ( 'NONE', #10743, #324, #9423, .T. ) ; +#11775 = CARTESIAN_POINT ( 'NONE', ( 32.99938941487941000, -30.77994081173497800, 26.06659381733430800 ) ) ; +#11776 = CARTESIAN_POINT ( 'NONE', ( 28.55133547725770200, -10.00638176103139400, -24.99999999999880600 ) ) ; +#11777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11778 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -97.57595292570691500, 13.49307748422399400 ) ) ; +#11779 = CARTESIAN_POINT ( 'NONE', ( 16.19923447322811700, -12.49999999999958800, -22.87455236746133400 ) ) ; +#11780 = LINE ( 'NONE', #1980, #11979 ) ; +#11781 = ORIENTED_EDGE ( 'NONE', *, *, #12110, .F. ) ; +#11782 = FACE_OUTER_BOUND ( 'NONE', #10348, .T. ) ; +#11783 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.06772555652651000, -24.99999999999999600 ) ) ; +#11784 = CARTESIAN_POINT ( 'NONE', ( 35.93751577209667400, -29.01636587402559500, 22.98488589109711100 ) ) ; +#11785 = CARTESIAN_POINT ( 'NONE', ( 7.249190902962261000, -100.0000000000000100, 19.64462267309755500 ) ) ; +#11786 = CARTESIAN_POINT ( 'NONE', ( 26.76761086008430400, -19.16889483761669100, 22.79203025926997500 ) ) ; +#11787 = ORIENTED_EDGE ( 'NONE', *, *, #13041, .T. ) ; +#11788 = CARTESIAN_POINT ( 'NONE', ( 5.717472393966525700E-018, 9.723952627011016100, -15.80112425796744300 ) ) ; +#11789 = CARTESIAN_POINT ( 'NONE', ( 9.832993062604927600, -30.77992593792039600, 27.46735433321666500 ) ) ; +#11790 = CARTESIAN_POINT ( 'NONE', ( 35.19979084550735100, -30.97971764470033000, 23.80264007928483500 ) ) ; +#11791 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -95.45536033961578000, 3.667068596693333400 ) ) ; +#11792 = ADVANCED_FACE ( 'NONE', ( #6444 ), #3043, .T. ) ; +#11793 = ORIENTED_EDGE ( 'NONE', *, *, #9416, .T. ) ; +#11794 = CARTESIAN_POINT ( 'NONE', ( 2.499767307905159900, -20.41325282298110400, 7.791169615525446600 ) ) ; +#11795 = CARTESIAN_POINT ( 'NONE', ( 27.75663480041624000, -28.11102656145638100, 26.76165842703351700 ) ) ; +#11796 = CARTESIAN_POINT ( 'NONE', ( 6.436846170172779000, -31.01220139270671100, 25.49216848178289000 ) ) ; +#11797 = CARTESIAN_POINT ( 'NONE', ( 39.39549902527606000, -11.89066078077422800, 10.18299365342845800 ) ) ; +#11798 = CARTESIAN_POINT ( 'NONE', ( 13.07913469572463500, -24.12374537100714300, 19.18713617756865700 ) ) ; +#11799 = CARTESIAN_POINT ( 'NONE', ( 28.23955314646856600, -10.21539878535238300, -25.03798061746928000 ) ) ; +#11800 = CARTESIAN_POINT ( 'NONE', ( 0.7133154034170622300, -10.00000000000228600, 13.04917659236051400 ) ) ; +#11801 = CARTESIAN_POINT ( 'NONE', ( 30.75617125260423300, -30.37478889304723500, 27.26096614536118800 ) ) ; +#11802 = CARTESIAN_POINT ( 'NONE', ( 5.289002235404794300, -28.83925307298194700, 24.47023034362412700 ) ) ; +#11803 = CARTESIAN_POINT ( 'NONE', ( 8.041752020301808900, -30.58744729067097600, 26.70999378959929500 ) ) ; +#11804 = CARTESIAN_POINT ( 'NONE', ( 36.28269958153962400, -30.68420405881844500, 22.01680112453649200 ) ) ; +#11805 = ORIENTED_EDGE ( 'NONE', *, *, #7830, .F. ) ; +#11806 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.50836345810398600, 10.00775520641872500 ) ) ; +#11807 = CARTESIAN_POINT ( 'NONE', ( 4.476409075299927500, -30.57283734386770000, 24.12222072005027200 ) ) ; +#11808 = CARTESIAN_POINT ( 'NONE', ( 10.54360763156131700, -38.52588166476528600, 18.24312058641623600 ) ) ; +#11809 = CARTESIAN_POINT ( 'NONE', ( 38.46941404539919800, -95.07596123493894400, 7.948371964453384600 ) ) ; +#11810 = ORIENTED_EDGE ( 'NONE', *, *, #2855, .T. ) ; +#11811 = CARTESIAN_POINT ( 'NONE', ( 28.80424908285671000, -100.0000000000000100, 4.900729108231353800 ) ) ; +#11812 = CARTESIAN_POINT ( 'NONE', ( 29.24729680009424700, -30.79352168701324600, 27.78642956348888000 ) ) ; +#11813 = CARTESIAN_POINT ( 'NONE', ( 36.24311286946803500, -99.99999999999998600, 17.91938285900820600 ) ) ; +#11814 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 8.981438871123705400, 20.00000000000000000 ) ) ; +#11815 = CARTESIAN_POINT ( 'NONE', ( 16.52588349782476800, -19.00051484900024700, 23.41296639185414500 ) ) ; +#11816 = PLANE ( 'NONE', #8210 ) ; +#11817 = EDGE_CURVE ( 'NONE', #2004, #11259, #911, .T. ) ; +#11818 = CARTESIAN_POINT ( 'NONE', ( 3.278371995565798600, -30.43718880997192900, 21.48090201145399900 ) ) ; +#11819 = FACE_OUTER_BOUND ( 'NONE', #77, .T. ) ; +#11820 = CARTESIAN_POINT ( 'NONE', ( 13.29279691331374700, -11.68860824032028700, 24.70225280738490200 ) ) ; +#11821 = CARTESIAN_POINT ( 'NONE', ( 24.90622375325185400, -12.50000000000001200, 8.264843237900658200 ) ) ; +#11822 = CARTESIAN_POINT ( 'NONE', ( 32.64329511127578300, -29.88652749588413800, 26.27039447775824100 ) ) ; +#11823 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13207, #3190, #12140, #5405 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004719211164662194500 ), + .UNSPECIFIED. ) ; +#11824 = CARTESIAN_POINT ( 'NONE', ( 29.52324884784989200, -10.19246902129769200, -24.99999999999999600 ) ) ; +#11825 = CARTESIAN_POINT ( 'NONE', ( 2.853743853687856100, -30.28078181837162900, 21.50848101629723500 ) ) ; +#11826 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.500000000000000000, -19.99999999999999600 ) ) ; +#11827 = CARTESIAN_POINT ( 'NONE', ( 16.92482711268086600, -12.49999999999998600, -14.48210848812328600 ) ) ; +#11828 = ORIENTED_EDGE ( 'NONE', *, *, #6031, .F. ) ; +#11829 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #1207, #7952 ) ; +#11830 = CARTESIAN_POINT ( 'NONE', ( 12.58359595370159000, -11.87724389807648300, 24.55522993379390700 ) ) ; +#11831 = CARTESIAN_POINT ( 'NONE', ( 36.44931178141808200, -28.87043262030299900, 21.75755471858354500 ) ) ; +#11832 = PLANE ( 'NONE', #12480 ) ; +#11833 = CARTESIAN_POINT ( 'NONE', ( 24.76730336376763500, -19.96107795305902500, 23.07724434969349400 ) ) ; +#11834 = CARTESIAN_POINT ( 'NONE', ( 16.92046142258400800, -12.49999999999999300, 10.07178959221946900 ) ) ; +#11835 = CARTESIAN_POINT ( 'NONE', ( 9.837475330803116000, -30.53853050367565200, 27.49611313426872200 ) ) ; +#11836 = CARTESIAN_POINT ( 'NONE', ( 35.27322057956001800, -29.64549336957571400, 24.40489974284712500 ) ) ; +#11837 = CARTESIAN_POINT ( 'NONE', ( 7.727574400171483200, -12.49999999999985100, 17.39186680656659700 ) ) ; +#11838 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000515900, -90.82477459638489800, -3.049166624952955200 ) ) ; +#11839 = EDGE_CURVE ( 'NONE', #4265, #9976, #6942, .T. ) ; +#11840 = CARTESIAN_POINT ( 'NONE', ( 4.067292464092431300, -18.98621776337840900, 15.33759674447898800 ) ) ; +#11841 = CARTESIAN_POINT ( 'NONE', ( 2.500300021316892400, -21.22397266942971000, 7.887116908871462300 ) ) ; +#11842 = CARTESIAN_POINT ( 'NONE', ( 39.52168334435040700, -11.89300550940553500, 8.465924552773874000 ) ) ; +#11843 = CARTESIAN_POINT ( 'NONE', ( 6.352631630257595100, -30.17718933495355300, 25.76039503888212300 ) ) ; +#11844 = CARTESIAN_POINT ( 'NONE', ( 33.23664003695829900, -18.54088238239223000, -22.82935076965022600 ) ) ; +#11845 = CARTESIAN_POINT ( 'NONE', ( 39.28667840924227800, -9.999999999999996400, 13.04919761982926800 ) ) ; +#11846 = CARTESIAN_POINT ( 'NONE', ( 16.04380648543112600, -18.95390503176682600, 23.40255503437742100 ) ) ; +#11847 = CARTESIAN_POINT ( 'NONE', ( 13.22169761311153200, -12.50000000000004800, 21.30668072710745900 ) ) ; +#11848 = CARTESIAN_POINT ( 'NONE', ( 32.91025912664052600, -12.42873370560516500, -24.02979388809124100 ) ) ; +#11849 = AXIS2_PLACEMENT_3D ( 'NONE', #5918, #13729, #7051 ) ; +#11850 = CARTESIAN_POINT ( 'NONE', ( 2.715554233967477000, -18.71040334669557100, -15.76394089213439800 ) ) ; +#11851 = CARTESIAN_POINT ( 'NONE', ( 3.272119517911640700, -11.88235591641422900, 17.54066356988581900 ) ) ; +#11852 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11853 = CARTESIAN_POINT ( 'NONE', ( 30.77159779396655600, -30.67722646954261400, 27.24364759648393200 ) ) ; +#11854 = CARTESIAN_POINT ( 'NONE', ( 7.494512679044822400, -26.76023159465760100, 18.25988797239033100 ) ) ; +#11855 = CARTESIAN_POINT ( 'NONE', ( 8.091294768149133200, -30.07001482382766300, 26.70349356445556300 ) ) ; +#11856 = CARTESIAN_POINT ( 'NONE', ( 37.00499246911598300, -29.58516802955979900, 22.51285741317878200 ) ) ; +#11857 = CIRCLE ( 'NONE', #4508, 2.500000000000000900 ) ; +#11858 = FACE_OUTER_BOUND ( 'NONE', #8969, .T. ) ; +#11859 = CARTESIAN_POINT ( 'NONE', ( 3.923840633302967200, -94.27290945639647600, 6.529463264190758800 ) ) ; +#11860 = ORIENTED_EDGE ( 'NONE', *, *, #10714, .T. ) ; +#11861 = EDGE_CURVE ( 'NONE', #13724, #8117, #1434, .T. ) ; +#11862 = CARTESIAN_POINT ( 'NONE', ( 4.601229584885199000, -29.52684862144139500, 24.19701726848651900 ) ) ; +#11863 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #8994, #2293, #3405, #11248 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896300 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243650500, 0.8047378541243650500, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#11864 = CARTESIAN_POINT ( 'NONE', ( 8.896507408013135900, -31.41785052284544100, 18.53401340406061600 ) ) ; +#11865 = CARTESIAN_POINT ( 'NONE', ( 29.60703553629230100, -95.07596123494816700, 8.224698702687726700 ) ) ; +#11866 = CARTESIAN_POINT ( 'NONE', ( 0.7371287427210264600, -10.80924405743809800, 13.51840251448590800 ) ) ; +#11867 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000008200, -22.03500000000001400, 20.37790478717370500 ) ) ; +#11868 = CARTESIAN_POINT ( 'NONE', ( 29.24850174648955200, -30.87203550763932500, 27.77057250878929300 ) ) ; +#11869 = CARTESIAN_POINT ( 'NONE', ( 29.92907332410812800, -100.0000000000000100, 20.60128416911847500 ) ) ; +#11870 = ADVANCED_FACE ( 'NONE', ( #12392 ), #1174, .T. ) ; +#11871 = CARTESIAN_POINT ( 'NONE', ( 39.62941047717546200, -11.48235809129812400, 9.157130848143653500 ) ) ; +#11872 = CARTESIAN_POINT ( 'NONE', ( 36.25138608254123100, -30.70012642738368000, 22.08018261239598300 ) ) ; +#11873 = CARTESIAN_POINT ( 'NONE', ( 2.719878529373713800, -29.31183443051721200, 21.67933151578570200 ) ) ; +#11874 = CARTESIAN_POINT ( 'NONE', ( 5.644131370910590900, -100.0000000000000300, -29.69330526753333300 ) ) ; +#11875 = CARTESIAN_POINT ( 'NONE', ( 34.75213510801161500, -22.84327973326660200, 10.02861335029214400 ) ) ; +#11876 = CARTESIAN_POINT ( 'NONE', ( 32.73630302500325200, -30.59314630068587000, 26.30036929750661300 ) ) ; +#11877 = CARTESIAN_POINT ( 'NONE', ( 2.201604286630112200, -18.80694826461778700, -11.70378783570186700 ) ) ; +#11878 = ORIENTED_EDGE ( 'NONE', *, *, #10538, .F. ) ; +#11879 = CARTESIAN_POINT ( 'NONE', ( 29.91031821997965800, -11.49532564937289100, -25.05661269240437900 ) ) ; +#11880 = CARTESIAN_POINT ( 'NONE', ( 4.859163353066980700, -9.852061065451033900, 25.00000000000000400 ) ) ; +#11881 = DIRECTION ( 'NONE', ( 0.2404117325113100100, 0.0000000000000000000, 0.9706710044453322700 ) ) ; +#11882 = CARTESIAN_POINT ( 'NONE', ( 12.98273186620110800, -20.88155088929652000, -23.55874654645098700 ) ) ; +#11883 = CARTESIAN_POINT ( 'NONE', ( 10.09624429117537900, -8.800098981295796800, 25.00000000000000400 ) ) ; +#11884 = CARTESIAN_POINT ( 'NONE', ( 8.042206103762273600, -11.01611516337115900, -25.00000000000000000 ) ) ; +#11885 = CARTESIAN_POINT ( 'NONE', ( 23.27095518959183100, -19.69134039613120300, 23.27962339168092100 ) ) ; +#11886 = CARTESIAN_POINT ( 'NONE', ( 15.49050367219753500, -24.21376797109587300, 19.82864991772600800 ) ) ; +#11887 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992900, -95.78490438435378000, 4.330279032275226900 ) ) ; +#11888 = CARTESIAN_POINT ( 'NONE', ( 0.09708713634879574700, 10.18993461597465900, -17.86050372698883100 ) ) ; +#11889 = CARTESIAN_POINT ( 'NONE', ( 10.24022077624352900, -30.85591457053933700, 27.60054670823956300 ) ) ; +#11890 = CARTESIAN_POINT ( 'NONE', ( 35.27323828076361400, -30.72802909166043500, 24.21401838384666800 ) ) ; +#11891 = CARTESIAN_POINT ( 'NONE', ( 15.86696317921749600, -12.49999999999999100, 9.516116296748231600 ) ) ; +#11892 = EDGE_LOOP ( 'NONE', ( #4286, #9485, #9073, #5437 ) ) ; +#11893 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -17.49999999999999600 ) ) ; +#11894 = CARTESIAN_POINT ( 'NONE', ( 13.96234962064179400, -19.17916951254013100, 22.99487879907438900 ) ) ; +#11895 = CARTESIAN_POINT ( 'NONE', ( 2.198495576865991700, -18.79488209612005500, 7.970340829113753000 ) ) ; +#11896 = CARTESIAN_POINT ( 'NONE', ( 35.63707962354732900, -11.88103157075818600, 19.03598256687847000 ) ) ; +#11897 = CARTESIAN_POINT ( 'NONE', ( 6.580334719144392600, -31.16763397870259000, 25.44694953822281400 ) ) ; +#11898 = CARTESIAN_POINT ( 'NONE', ( 4.628377351726935100, -10.00180964642545000, 22.59822649237591800 ) ) ; +#11899 = ORIENTED_EDGE ( 'NONE', *, *, #9435, .T. ) ; +#11900 = CARTESIAN_POINT ( 'NONE', ( 38.76175232538631800, -10.00000000000000400, 18.86318126462668900 ) ) ; +#11901 = DIRECTION ( 'NONE', ( 5.327447116441166800E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#11902 = CARTESIAN_POINT ( 'NONE', ( 27.96816728596749300, -10.08070564667377100, 24.98576941699588600 ) ) ; +#11903 = CARTESIAN_POINT ( 'NONE', ( 39.92336750364715700, -10.30652998541130600, 11.21927956814949600 ) ) ; +#11904 = CARTESIAN_POINT ( 'NONE', ( 5.303637659893846400, -21.95765113914975000, -20.75784591200116200 ) ) ; +#11905 = CARTESIAN_POINT ( 'NONE', ( 5.503874491182017400, -10.00000000000000400, 23.52391351101058700 ) ) ; +#11906 = ORIENTED_EDGE ( 'NONE', *, *, #9873, .T. ) ; +#11907 = CARTESIAN_POINT ( 'NONE', ( 30.75693790868569300, -31.01099571141905600, 27.15057424651261900 ) ) ; +#11908 = CARTESIAN_POINT ( 'NONE', ( 4.950286742286331300, -21.88272629607504500, 16.02688330428653900 ) ) ; +#11909 = CARTESIAN_POINT ( 'NONE', ( 8.338703008761323000, -30.73112901797054500, 26.82487173038258600 ) ) ; +#11910 = CARTESIAN_POINT ( 'NONE', ( 36.32268057437866600, -30.66797812027204600, 22.31900021415562200 ) ) ; +#11911 = EDGE_CURVE ( 'NONE', #2854, #13418, #9800, .T. ) ; +#11912 = VERTEX_POINT ( 'NONE', #12032 ) ; +#11913 = CARTESIAN_POINT ( 'NONE', ( 2.500000000004351600, -93.59664222891763100, 2.266305945996144500 ) ) ; +#11914 = CARTESIAN_POINT ( 'NONE', ( 4.739764888161321500, -30.91540658363190600, 23.86710402704379800 ) ) ; +#11915 = CARTESIAN_POINT ( 'NONE', ( 3.235863370628851300, -30.26942355435795300, 20.62625925235889200 ) ) ; +#11916 = CARTESIAN_POINT ( 'NONE', ( 24.47525136919168200, -89.21338468287729000, 10.93317457922517900 ) ) ; +#11917 = CARTESIAN_POINT ( 'NONE', ( -4.082070681726222900E-013, -9.620211610928825200, 18.56041095908035400 ) ) ; +#11918 = DIRECTION ( 'NONE', ( -0.02351537505554253400, -0.9997234753350534600, 0.0000000000000000000 ) ) ; +#11919 = CARTESIAN_POINT ( 'NONE', ( 29.14485387690053400, -30.78094397503310000, 27.82117230203976300 ) ) ; +#11920 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -21.23116646380270100, -11.74895849411027300 ) ) ; +#11921 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.1736481776669238100, -0.9848077530122092400 ) ) ; +#11922 = CARTESIAN_POINT ( 'NONE', ( 39.52817769606245000, -11.88728921575017900, 8.011897626907758900 ) ) ; +#11923 = ORIENTED_EDGE ( 'NONE', *, *, #7687, .F. ) ; +#11924 = CARTESIAN_POINT ( 'NONE', ( 35.84944219427009000, -30.86453811390179800, 22.80923215855049000 ) ) ; +#11925 = CARTESIAN_POINT ( 'NONE', ( 3.556783716941002800, -30.56480851245735400, 21.52614629136993000 ) ) ; +#11926 = CARTESIAN_POINT ( 'NONE', ( 8.330606680480363100, -20.28809933266904900, -20.24519658932779400 ) ) ; +#11927 = CARTESIAN_POINT ( 'NONE', ( 35.05317222919127600, -12.50000000000014700, 7.949945472867831600 ) ) ; +#11928 = CARTESIAN_POINT ( 'NONE', ( 32.63865165566421200, -31.15632114354876200, 26.03879008317018400 ) ) ; +#11929 = VERTEX_POINT ( 'NONE', #11484 ) ; +#11930 = CARTESIAN_POINT ( 'NONE', ( 30.52967613907830800, -12.60716440412521800, -24.99999999999999600 ) ) ; +#11931 = CARTESIAN_POINT ( 'NONE', ( 7.617759972620525000, -7.937838028918946500, 25.00000000000000000 ) ) ; +#11932 = CARTESIAN_POINT ( 'NONE', ( 17.43873147890898100, -19.88640213962530700, 23.25679227354088100 ) ) ; +#11933 = CARTESIAN_POINT ( 'NONE', ( 12.79770151451039700, -12.50000000000010500, -22.02477323140904600 ) ) ; +#11934 = CARTESIAN_POINT ( 'NONE', ( 3.508666427060371400, -95.07596123493894400, 0.4163258229736830400 ) ) ; +#11935 = EDGE_CURVE ( 'NONE', #950, #13818, #6780, .T. ) ; +#11936 = CARTESIAN_POINT ( 'NONE', ( 13.51636823017726900, -14.42990187126875100, 24.13642604217858100 ) ) ; +#11937 = CARTESIAN_POINT ( 'NONE', ( 22.34990777206995100, -33.18274856558008400, 28.41225594090786500 ) ) ; +#11938 = CARTESIAN_POINT ( 'NONE', ( 15.66428857735900100, -95.07596123493893000, 9.913781257752084700 ) ) ; +#11939 = ORIENTED_EDGE ( 'NONE', *, *, #5411, .F. ) ; +#11940 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 9.500000000000000000, -24.99999999999999300 ) ) ; +#11941 = CARTESIAN_POINT ( 'NONE', ( 17.02460998856129800, -12.49999999999645400, 22.05918264937169900 ) ) ; +#11942 = CARTESIAN_POINT ( 'NONE', ( 6.763359963038499100, -18.54088238238932700, -22.82935076964802000 ) ) ; +#11943 = CARTESIAN_POINT ( 'NONE', ( 10.24021802053579000, -30.68359936466086800, 27.63092947789353800 ) ) ; +#11944 = CARTESIAN_POINT ( 'NONE', ( 34.93251884372197900, -29.33414964976897800, 24.40340399724723900 ) ) ; +#11945 = CARTESIAN_POINT ( 'NONE', ( 9.754871727482292700, -23.86158027240187400, 17.31784802005094900 ) ) ; +#11946 = ORIENTED_EDGE ( 'NONE', *, *, #6157, .F. ) ; +#11947 = AXIS2_PLACEMENT_3D ( 'NONE', #13367, #5582, #13410 ) ; +#11948 = CARTESIAN_POINT ( 'NONE', ( 16.45529727287445700, -25.60470649827975400, 22.25067694784779300 ) ) ; +#11949 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#11950 = VECTOR ( 'NONE', #6231, 1000.000000000000000 ) ; +#11951 = ADVANCED_FACE ( 'NONE', ( #12733 ), #5501, .T. ) ; +#11952 = CARTESIAN_POINT ( 'NONE', ( 2.397773559766522000, -19.58630142979056300, 7.980722831517868900 ) ) ; +#11953 = CARTESIAN_POINT ( 'NONE', ( 6.422344739989591200, -30.41752798544769800, 25.80984749197057600 ) ) ; +#11954 = CARTESIAN_POINT ( 'NONE', ( 32.98965273060983300, -11.87904182685246300, 21.62674724078571100 ) ) ; +#11955 = ORIENTED_EDGE ( 'NONE', *, *, #11754, .T. ) ; +#11956 = CARTESIAN_POINT ( 'NONE', ( 22.35454854623587900, -33.43814961503964900, 28.48292143413002400 ) ) ; +#11957 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2444, #6923, #9203 ), + ( #2498, #10315, #3611 ), + ( #11456, #4718, #12556 ), + ( #5851, #13657, #6969 ), + ( #362, #8121, #1450 ), + ( #9248, #2548, #10363 ), + ( #3654, #11500, #4769 ), + ( #12601, #5895, #13708 ), + ( #7023, #407, #8172 ), + ( #1506, #9295, #2595 ), + ( #10418, #3706, #11551 ), + ( #4813, #12650, #5943 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.008187164175362107000, 0.01152625451359276500, 0.01319579968270809400, 0.01486534485182342300, 0.01820443519005408200, 0.02154352552828474000 ), + ( 0.0000000000000000000, 0.5307183999847175900 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540700200, 0.9683344096045718400), + ( 1.000000000000000000, 0.9662616322540700200, 0.9683344096045718400), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000), + ( 1.000000000000000000, 0.9662616322540715800, 0.9683344096045734000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#11958 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -30.65936817474672100, 28.85719598640244100 ) ) ; +#11959 = EDGE_CURVE ( 'NONE', #2854, #2583, #8872, .T. ) ; +#11960 = CARTESIAN_POINT ( 'NONE', ( 7.755233650768875700, -20.32814742867757100, -23.21319803986950300 ) ) ; +#11961 = CARTESIAN_POINT ( 'NONE', ( 10.77301627892331700, -10.00000000000000500, 24.43771116278708500 ) ) ; +#11962 = CIRCLE ( 'NONE', #10545, 3.189999999999994200 ) ; +#11963 = ORIENTED_EDGE ( 'NONE', *, *, #12221, .F. ) ; +#11964 = CARTESIAN_POINT ( 'NONE', ( 30.66909215902144900, -30.58814928895516500, 27.29563017478511700 ) ) ; +#11965 = CARTESIAN_POINT ( 'NONE', ( 2.535448835757419000, -27.92768556837500800, 12.44574372807542400 ) ) ; +#11966 = CARTESIAN_POINT ( 'NONE', ( 8.364021309734702900, -30.22496183655374600, 26.86086813783589700 ) ) ; +#11967 = CARTESIAN_POINT ( 'NONE', ( 36.41481346166467900, -29.21230258187271600, 22.78558373009447600 ) ) ; +#11968 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999989300, -90.07596123493894400, -4.350951650170821400 ) ) ; +#11969 = AXIS2_PLACEMENT_3D ( 'NONE', #6378, #14184, #7513 ) ; +#11970 = CARTESIAN_POINT ( 'NONE', ( 4.423729740015866200, -29.96525356609968700, 24.31401163970351900 ) ) ; +#11971 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #616, #4983, #8393 ), + ( #1713, #9518, #2808 ), + ( #10650, #3929, #11764 ), + ( #5029, #12876, #6162 ), + ( #13970, #7288, #664 ), + ( #8441, #1756, #9565 ), + ( #2858, #10694, #3973 ), + ( #11809, #5083, #12922 ), + ( #6215, #14021, #7342 ), + ( #713, #8494, #1810 ), + ( #9620, #2913, #10755 ), + ( #4023, #11865, #5137 ), + ( #12974, #6262, #14075 ), + ( #7403, #764, #8547 ), + ( #1868, #9675, #2967 ), + ( #10811, #4080, #11916 ), + ( #5192, #13031, #6319 ), + ( #14130, #7459, #821 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 4.702964202423920000, 4.900491840518379000, 5.098019478612837200, 5.295547116707295400, 5.493074754801753600, 5.690602392896211700, 5.888130030990669900, 6.085657669085128100, 6.283185307179586200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7076851599719626900, 1.000000000000000000), + ( 1.000000000000000000, 0.7036464409744944700, 1.000000000000000000), + ( 1.000000000000000000, 0.6995687671181053400, 1.000000000000000000), + ( 1.000000000000000000, 0.6914945400838891100, 1.000000000000000000), + ( 1.000000000000000000, 0.6874980667938469500, 1.000000000000000000), + ( 1.000000000000000000, 0.6797498133379195100, 1.000000000000000000), + ( 1.000000000000000000, 0.6759982929549097600, 1.000000000000000000), + ( 1.000000000000000000, 0.6689019988231477100, 1.000000000000000000), + ( 1.000000000000000000, 0.6655575263462254500, 1.000000000000000000), + ( 1.000000000000000000, 0.6594271385701251400, 1.000000000000000000), + ( 1.000000000000000000, 0.6566415426773898300, 1.000000000000000000), + ( 1.000000000000000000, 0.6517610593498380800, 1.000000000000000000), + ( 1.000000000000000000, 0.6496664724626450800, 1.000000000000000000), + ( 1.000000000000000000, 0.6462710433720486600, 1.000000000000000000), + ( 1.000000000000000000, 0.6449704378542318000, 1.000000000000000000), + ( 1.000000000000000000, 0.6432286554914743400, 1.000000000000000000), + ( 1.000000000000000000, 0.6427869131628413100, 1.000000000000000000), + ( 1.000000000000000000, 0.6427876096865418100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#11972 = LINE ( 'NONE', #9641, #11989 ) ; +#11973 = CARTESIAN_POINT ( 'NONE', ( 29.14521063790561300, -30.84406210319559300, 27.80968369258176100 ) ) ; +#11974 = CARTESIAN_POINT ( 'NONE', ( 36.99049168004942300, -18.68698805828414700, -16.74971851578253300 ) ) ; +#11975 = CARTESIAN_POINT ( 'NONE', ( 8.632536697985237600, -97.40634803306923600, 20.62259995189050300 ) ) ; +#11976 = ORIENTED_EDGE ( 'NONE', *, *, #11584, .T. ) ; +#11977 = CARTESIAN_POINT ( 'NONE', ( 34.73445165779182300, -31.09212555572980800, 24.21838616604764000 ) ) ; +#11978 = CARTESIAN_POINT ( 'NONE', ( 2.499992876310418200, -29.66370378033681700, 21.68574683107743100 ) ) ; +#11979 = VECTOR ( 'NONE', #6342, 1000.000000000000000 ) ; +#11980 = CARTESIAN_POINT ( 'NONE', ( 12.29083753135673800, -100.0000000000000300, -37.21869687476578300 ) ) ; +#11981 = CARTESIAN_POINT ( 'NONE', ( 22.31280744310812000, -31.29913968154958300, 28.74438700826458900 ) ) ; +#11982 = EDGE_CURVE ( 'NONE', #10006, #8229, #3137, .T. ) ; +#11983 = CARTESIAN_POINT ( 'NONE', ( 32.54069138155836800, -30.45518038592342300, 26.42587494872505300 ) ) ; +#11984 = ORIENTED_EDGE ( 'NONE', *, *, #1790, .F. ) ; +#11985 = CARTESIAN_POINT ( 'NONE', ( 11.14727394329432800, -11.09276304568116200, 24.42769486507931400 ) ) ; +#11986 = CARTESIAN_POINT ( 'NONE', ( 0.1769295830769029000, -10.70771833230755000, 10.93671122204943600 ) ) ; +#11987 = CARTESIAN_POINT ( 'NONE', ( 16.34442021866236800, -12.49999999999998000, -14.25789656186876900 ) ) ; +#11988 = CARTESIAN_POINT ( 'NONE', ( 2.500666193365742400, -90.08414409138437400, -4.495944938627295600 ) ) ; +#11989 = VECTOR ( 'NONE', #1832, 1000.000000000000000 ) ; +#11990 = CARTESIAN_POINT ( 'NONE', ( 19.21401550145866100, -33.38452916951347000, 26.50167657627992000 ) ) ; +#11991 = CARTESIAN_POINT ( 'NONE', ( 9.941665545761235700, -89.32382647200005000, 8.976239578193634800 ) ) ; +#11992 = ORIENTED_EDGE ( 'NONE', *, *, #11501, .T. ) ; +#11993 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, 3.189999999999994200 ) ) ; +#11994 = CARTESIAN_POINT ( 'NONE', ( 23.16757467862805700, -19.29357107200190700, 23.36129267287443400 ) ) ; +#11995 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -90.07596123493897300, -4.350951650170485700 ) ) ; +#11996 = CARTESIAN_POINT ( 'NONE', ( 12.35364417749228300, -11.71232306770861700, -25.30192875652649700 ) ) ; +#11997 = CARTESIAN_POINT ( 'NONE', ( 10.44431126803008200, -30.89438932962557200, 27.66316862911487800 ) ) ; +#11998 = CARTESIAN_POINT ( 'NONE', ( 35.27951333648467600, -30.40311944462505500, 24.55091144025594100 ) ) ; +#11999 = ORIENTED_EDGE ( 'NONE', *, *, #2902, .F. ) ; +#12000 = CARTESIAN_POINT ( 'NONE', ( 16.77963623266078800, -20.76598688081443100, -24.38029403639891900 ) ) ; +#12001 = CARTESIAN_POINT ( 'NONE', ( 28.23955314646853100, -9.781278341185187100, -24.99999999999999600 ) ) ; +#12002 = CARTESIAN_POINT ( 'NONE', ( 2.499529229003251400, -20.40137439880736600, 7.978585395370444600 ) ) ; +#12003 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12004 = CARTESIAN_POINT ( 'NONE', ( 6.580741962238418500, -29.65290902653710600, 25.71344911933465500 ) ) ; +#12005 = CARTESIAN_POINT ( 'NONE', ( 10.08225502811152600, -17.00481841615709700, -26.23513848172988000 ) ) ; +#12006 = LINE ( 'NONE', #8569, #11950 ) ; +#12007 = CARTESIAN_POINT ( 'NONE', ( 29.22694871428182100, -9.999999999994544800, 24.43772600735232500 ) ) ; +#12008 = CARTESIAN_POINT ( 'NONE', ( 26.58152031156615200, -39.15315981854551800, 19.29429091335399700 ) ) ; +#12009 = CARTESIAN_POINT ( 'NONE', ( 3.726219166999684700, -28.93606212217737900, 22.33862799766690100 ) ) ; +#12010 = CARTESIAN_POINT ( 'NONE', ( 13.45067698649139500, -99.99999999999995700, 5.951366538839410600 ) ) ; +#12011 = CARTESIAN_POINT ( 'NONE', ( 10.82577233491853400, -18.46832425507885100, -25.76071899046295100 ) ) ; +#12012 = CARTESIAN_POINT ( 'NONE', ( 3.000835476811938700, -96.03959088941265100, 12.92966639746687100 ) ) ; +#12013 = EDGE_LOOP ( 'NONE', ( #7451, #5614, #8382, #4766 ) ) ; +#12014 = CARTESIAN_POINT ( 'NONE', ( 30.66556841878479700, -30.90322661900647800, 27.23167754034994600 ) ) ; +#12015 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -27.09143239524032900, 6.754920151478383000 ) ) ; +#12016 = CARTESIAN_POINT ( 'NONE', ( 8.450370818339211000, -30.93458932937877700, 26.80799099510520700 ) ) ; +#12017 = CARTESIAN_POINT ( 'NONE', ( 36.66413237819081400, -30.38140887944403800, 22.58881061139006600 ) ) ; +#12018 = AXIS2_PLACEMENT_3D ( 'NONE', #11110, #12214, #4384 ) ; +#12019 = CARTESIAN_POINT ( 'NONE', ( 4.986540800699923900, -31.05313231812389700, 23.91327286830739500 ) ) ; +#12020 = CARTESIAN_POINT ( 'NONE', ( 34.52524706999576400, -94.72219806545246000, 15.44556310733776700 ) ) ; +#12021 = CARTESIAN_POINT ( 'NONE', ( 34.57073948115358100, -20.25367621077533900, -20.63516100819618500 ) ) ; +#12022 = CARTESIAN_POINT ( 'NONE', ( 25.32684736617272100, -16.98767862673538800, 23.72000170291719100 ) ) ; +#12023 = ADVANCED_FACE ( 'NONE', ( #11687 ), #5723, .F. ) ; +#12024 = ORIENTED_EDGE ( 'NONE', *, *, #10257, .F. ) ; +#12025 = CARTESIAN_POINT ( 'NONE', ( 33.71313010726596100, -31.16481237453091800, 25.19826380249236000 ) ) ; +#12026 = EDGE_CURVE ( 'NONE', #12274, #7078, #12970, .T. ) ; +#12027 = CARTESIAN_POINT ( 'NONE', ( 3.558456318673997500, -28.87897703208996700, 21.82350371412561800 ) ) ; +#12028 = CARTESIAN_POINT ( 'NONE', ( 12.93006893069215300, -11.79503796356002400, 24.68348637562839800 ) ) ; +#12029 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12030 = CARTESIAN_POINT ( 'NONE', ( 32.46992492069322400, -31.10575877895649200, 26.18877074436884600 ) ) ; +#12031 = CARTESIAN_POINT ( 'NONE', ( 3.927605907572083100, -29.00557464498378500, 22.80481886631201100 ) ) ; +#12032 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -99.99999999999998600, 6.630571736238761300 ) ) ; +#12033 = CARTESIAN_POINT ( 'NONE', ( 0.01376011428173822900, -10.05504045712689800, 10.81422882533345300 ) ) ; +#12034 = CARTESIAN_POINT ( 'NONE', ( 11.29282472899129700, -20.99379245679338600, -22.75993626286328100 ) ) ; +#12035 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -99.99999999999998600, 16.64953583563559300 ) ) ; +#12036 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000900, 16.29999999999999400 ) ) ; +#12037 = CARTESIAN_POINT ( 'NONE', ( 0.08030416023041021800, -95.07596123493894400, 5.716033726920952200 ) ) ; +#12038 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12859, #13952, #7271, #648 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009946230897873254000 ), + .UNSPECIFIED. ) ; +#12039 = CARTESIAN_POINT ( 'NONE', ( 11.55009299698237200, -97.50034312883693100, 21.44154207252973900 ) ) ; +#12040 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12041 = VERTEX_POINT ( 'NONE', #2184 ) ; +#12042 = CARTESIAN_POINT ( 'NONE', ( 1.995133494248020600, -11.85657085118505400, -18.72495531882367100 ) ) ; +#12043 = CARTESIAN_POINT ( 'NONE', ( 10.44477752692823800, -30.76264425300033200, 27.69055000340592400 ) ) ; +#12044 = CARTESIAN_POINT ( 'NONE', ( 34.61291157597335700, -29.33549914752492400, 24.66106022510402000 ) ) ; +#12045 = CARTESIAN_POINT ( 'NONE', ( 2.716750789569557100, -29.35188454696637800, 17.29922460746995900 ) ) ; +#12046 = EDGE_CURVE ( 'NONE', #8328, #3039, #1105, .T. ) ; +#12047 = CARTESIAN_POINT ( 'NONE', ( 8.943763431361521300, -21.23501308067791300, -21.04017281233072400 ) ) ; +#12048 = CARTESIAN_POINT ( 'NONE', ( 2.502830133565642400, -21.20606708502017300, 8.095161882154821200 ) ) ; +#12049 = CARTESIAN_POINT ( 'NONE', ( 5.474808194957755200, -94.72210163403924800, 15.44587895064602300 ) ) ; +#12050 = CARTESIAN_POINT ( 'NONE', ( 6.612596321182753200, -30.62344475700940900, 25.88413407889997600 ) ) ; +#12051 = CARTESIAN_POINT ( 'NONE', ( 10.62101549632617600, -20.15617598630703000, -25.37244035659120900 ) ) ; +#12052 = LINE ( 'NONE', #425, #6060 ) ; +#12053 = CARTESIAN_POINT ( 'NONE', ( 17.42649082925215600, -19.89845033991126800, 23.25457520830295300 ) ) ; +#12054 = CARTESIAN_POINT ( 'NONE', ( 31.34656860165176800, -32.49306459112558800, 26.40884949339210800 ) ) ; +#12055 = CARTESIAN_POINT ( 'NONE', ( 4.050386216974097800, -29.01365822206769700, 22.96476112635833600 ) ) ; +#12056 = CARTESIAN_POINT ( 'NONE', ( 5.922237887215129800, -99.99999999999995700, -1.248825278329968700 ) ) ; +#12057 = VERTEX_POINT ( 'NONE', #10049 ) ; +#12058 = CARTESIAN_POINT ( 'NONE', ( 14.18785585045240100, -22.43348034741483900, -26.82510799030752600 ) ) ; +#12059 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#12060 = CARTESIAN_POINT ( 'NONE', ( 30.36374625992363700, -30.51704340930411200, 27.42059341427872700 ) ) ; +#12061 = CARTESIAN_POINT ( 'NONE', ( 38.37396526223638200, -16.50413895105438300, 8.005331014629280900 ) ) ; +#12062 = CARTESIAN_POINT ( 'NONE', ( 8.441435718846316000, -30.45325444810917800, 26.91205369670617400 ) ) ; +#12063 = CARTESIAN_POINT ( 'NONE', ( 35.84920276043583000, -29.05950416643852200, 23.17517704009979700 ) ) ; +#12064 = FACE_OUTER_BOUND ( 'NONE', #8830, .T. ) ; +#12065 = CARTESIAN_POINT ( 'NONE', ( 24.67813647233311200, -12.50000000000004300, -13.24833659586266100 ) ) ; +#12066 = EDGE_CURVE ( 'NONE', #10148, #12126, #2773, .T. ) ; +#12067 = CARTESIAN_POINT ( 'NONE', ( 4.552825181240171700, -30.25831382600558000, 24.45639400830603800 ) ) ; +#12068 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57596123333628700, 12.92979962964743700 ) ) ; +#12069 = ORIENTED_EDGE ( 'NONE', *, *, #11129, .F. ) ; +#12070 = CARTESIAN_POINT ( 'NONE', ( 32.38825335808132900, -22.16742640746437200, -23.41102119036053300 ) ) ; +#12071 = CARTESIAN_POINT ( 'NONE', ( 36.64071313804144100, -28.94796858913977300, 21.74388287367874600 ) ) ; +#12072 = CARTESIAN_POINT ( 'NONE', ( 35.53895777287633700, -31.05128226365704000, 22.23621568674902000 ) ) ; +#12073 = CARTESIAN_POINT ( 'NONE', ( 32.28313605695833400, -31.13873397086900500, 26.27879923849651400 ) ) ; +#12074 = CARTESIAN_POINT ( 'NONE', ( 2.612241594739287600, -30.00492310587064900, 21.68891784367652400 ) ) ; +#12075 = CARTESIAN_POINT ( 'NONE', ( 12.26787055031394200, -11.56884222450247900, 24.55881497293799100 ) ) ; +#12076 = CARTESIAN_POINT ( 'NONE', ( -1.153023599449915800E-016, 5.300654457352230500, 20.22358027453075400 ) ) ; +#12077 = CARTESIAN_POINT ( 'NONE', ( 32.13289850561384500, -30.27215386665965700, 26.62737758915603000 ) ) ; +#12078 = CARTESIAN_POINT ( 'NONE', ( 6.458260745510581400, -22.07314677431823200, -22.21887505684904700 ) ) ; +#12079 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -39.52045731841471400, 19.79474689191102500 ) ) ; +#12080 = CARTESIAN_POINT ( 'NONE', ( 11.34562353276791100, -12.49999999999989700, -21.32301427957830200 ) ) ; +#12081 = ORIENTED_EDGE ( 'NONE', *, *, #2500, .F. ) ; +#12082 = CARTESIAN_POINT ( 'NONE', ( 20.78953345456538000, -27.93256442298146100, 27.46300505893113800 ) ) ; +#12083 = CARTESIAN_POINT ( 'NONE', ( 8.039782298940247400, -94.73201375282212700, 16.75006639166343800 ) ) ; +#12084 = ORIENTED_EDGE ( 'NONE', *, *, #4077, .F. ) ; +#12085 = CARTESIAN_POINT ( 'NONE', ( 37.98450209408621000, -11.89736398432790500, -18.74592009292192100 ) ) ; +#12086 = CARTESIAN_POINT ( 'NONE', ( 34.83032309391236900, -95.04933461967195300, 13.78296311307799400 ) ) ; +#12087 = CARTESIAN_POINT ( 'NONE', ( 31.37966630698426600, -10.50654271303899500, 23.81359129081109000 ) ) ; +#12088 = CARTESIAN_POINT ( 'NONE', ( 10.75129813147146700, -30.87385896744458700, 27.77005979427387300 ) ) ; +#12089 = CARTESIAN_POINT ( 'NONE', ( 34.96030750397091700, -30.20109131987902600, 24.87520451894545600 ) ) ; +#12090 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000008200, -24.23648177666924800, 19.98972415240892200 ) ) ; +#12091 = CARTESIAN_POINT ( 'NONE', ( 5.040236758617427700, -22.35822482782675600, -12.99117284882485300 ) ) ; +#12092 = DIRECTION ( 'NONE', ( 0.9998119278664175900, 0.01909889591383957500, 0.003367650651352426700 ) ) ; +#12093 = ORIENTED_EDGE ( 'NONE', *, *, #12203, .T. ) ; +#12094 = CARTESIAN_POINT ( 'NONE', ( 2.217179115863670400, -18.80976041416213500, 8.599658865740680700 ) ) ; +#12095 = CARTESIAN_POINT ( 'NONE', ( 13.31348233509832100, -94.74406870591668900, 18.34820490782199100 ) ) ; +#12096 = CARTESIAN_POINT ( 'NONE', ( 6.710882375604571200, -29.82832065512471700, 25.87693727402391300 ) ) ; +#12097 = CARTESIAN_POINT ( 'NONE', ( 16.36014049332469600, -20.13416216820638400, -26.78692621712971100 ) ) ; +#12098 = CARTESIAN_POINT ( 'NONE', ( 17.64039537637300400, -27.96255689439422200, 27.45771657700752400 ) ) ; +#12099 = AXIS2_PLACEMENT_3D ( 'NONE', #13325, #6618, #27 ) ; +#12100 = CARTESIAN_POINT ( 'NONE', ( 30.72519380946276600, -31.45604376314816600, 18.78051005900597300 ) ) ; +#12101 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #11276, #12375, #5662 ), + ( #13480, #6789, #191 ), + ( #7929, #1270, #9066 ), + ( #2367, #10192, #3475 ), + ( #11323, #4589, #12421 ), + ( #5705, #13525, #6831 ), + ( #226, #7976, #1313 ), + ( #9111, #2406, #10236 ), + ( #3521, #11365, #4637 ), + ( #12470, #5755, #13564 ), + ( #6882, #275, #8025 ), + ( #1367, #9157, #2453 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002568775134044965800, 0.005137550268089931600, 0.006421937835112414100, 0.007706325402134897400, 0.01027510053617986300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7936335741122224600, 1.000000000000000000), + ( 1.000000000000000000, 0.7934555248171010200, 1.000000000000000000), + ( 1.000000000000000000, 0.7932254709149887400, 1.000000000000000000), + ( 1.000000000000000000, 0.7926571772226483900, 1.000000000000000000), + ( 1.000000000000000000, 0.7923144877537592300, 1.000000000000000000), + ( 1.000000000000000000, 0.7916521718878403200, 1.000000000000000000), + ( 1.000000000000000000, 0.7914139264536393900, 1.000000000000000000), + ( 1.000000000000000000, 0.7908262841321228600, 1.000000000000000000), + ( 1.000000000000000000, 0.7904709048288152100, 1.000000000000000000), + ( 1.000000000000000000, 0.7893234327478306800, 1.000000000000000000), + ( 1.000000000000000000, 0.7881732945564112700, 1.000000000000000000), + ( 1.000000000000000000, 0.7866036418274049400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12102 = CARTESIAN_POINT ( 'NONE', ( 4.797810637341279400, -29.18957614231366500, 24.00888846919655600 ) ) ; +#12103 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12104 = ORIENTED_EDGE ( 'NONE', *, *, #7722, .F. ) ; +#12105 = CARTESIAN_POINT ( 'NONE', ( 30.36931541818051300, -30.78193182288058700, 27.38870634896628800 ) ) ; +#12106 = CARTESIAN_POINT ( 'NONE', ( 26.54932301350857000, -100.0000000000000300, -37.69022306636186700 ) ) ; +#12107 = CARTESIAN_POINT ( 'NONE', ( 8.659410808238684300, -31.06109916410147100, 26.85174960868000900 ) ) ; +#12108 = CARTESIAN_POINT ( 'NONE', ( 36.54270546805020800, -30.09287088065871200, 23.14247448815165600 ) ) ; +#12109 = ORIENTED_EDGE ( 'NONE', *, *, #798, .F. ) ; +#12110 = EDGE_CURVE ( 'NONE', #11213, #6982, #11703, .T. ) ; +#12111 = CARTESIAN_POINT ( 'NONE', ( 4.985539849475448400, -29.23856079129562200, 24.23417381378462600 ) ) ; +#12112 = ORIENTED_EDGE ( 'NONE', *, *, #3948, .F. ) ; +#12113 = CARTESIAN_POINT ( 'NONE', ( 28.71763965782279000, -18.46296283835482300, -25.97660268616573000 ) ) ; +#12114 = CARTESIAN_POINT ( 'NONE', ( 37.39833248856182700, -29.97926689933352800, 21.56203621553619200 ) ) ; +#12115 = CARTESIAN_POINT ( 'NONE', ( 17.64039441766890100, -33.35446909076585300, 26.50697697917649300 ) ) ; +#12116 = AXIS2_PLACEMENT_3D ( 'NONE', #272, #5751, #4633 ) ; +#12117 = CARTESIAN_POINT ( 'NONE', ( 30.29398980238532200, -30.97520847181310100, 27.36097928259186000 ) ) ; +#12118 = CARTESIAN_POINT ( 'NONE', ( 3.379744273060826900, -28.96328094176142500, 21.87142047807627400 ) ) ; +#12119 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -97.51638471114853200, 22.06850012136330700 ) ) ; +#12120 = ORIENTED_EDGE ( 'NONE', *, *, #3119, .T. ) ; +#12121 = CARTESIAN_POINT ( 'NONE', ( 32.13289501585732900, -30.89928377854386800, 26.51680859707375900 ) ) ; +#12122 = CARTESIAN_POINT ( 'NONE', ( 28.23955314646856600, -10.21539878535238300, -25.03798061746928000 ) ) ; +#12123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12124 = CARTESIAN_POINT ( 'NONE', ( 16.10626346275655500, -12.49999999999999300, -14.11202693233704200 ) ) ; +#12125 = CIRCLE ( 'NONE', #7968, 3.189999999999995100 ) ; +#12126 = VERTEX_POINT ( 'NONE', #98 ) ; +#12127 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999978700, -22.50000000000000700, 26.62899292861734000 ) ) ; +#12128 = EDGE_CURVE ( 'NONE', #2583, #4662, #9486, .T. ) ; +#12129 = CIRCLE ( 'NONE', #451, 5.000000000000000900 ) ; +#12130 = CARTESIAN_POINT ( 'NONE', ( 4.507238396690776300, -93.12022781676431300, 19.56393215560749600 ) ) ; +#12131 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#12132 = CARTESIAN_POINT ( 'NONE', ( 0.01415501518459262900, 8.388649503522390900, -20.39431017161785000 ) ) ; +#12133 = CARTESIAN_POINT ( 'NONE', ( 10.75254252233559900, -30.80578823645877400, 27.78418003422166300 ) ) ; +#12134 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3059, #14056, #10902 ), + ( #4167, #12005, #5274 ), + ( #13117, #6411, #14214 ), + ( #7545, #896, #8690 ), + ( #1998, #9812, #3109 ), + ( #10955, #4219, #12051 ), + ( #5327, #13165, #6457 ), + ( #14258, #7592, #945 ), + ( #8731, #2045, #9857 ), + ( #3151, #11000, #4270 ), + ( #12097, #5370, #13211 ), + ( #6501, #14300, #7638 ), + ( #993, #8780, #2083 ), + ( #9908, #3194, #11036 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -9.872744982653003400E-015, 0.002249427903882651900, 0.003374141855828914000, 0.004498855807775176100, 0.005623569759721438700, 0.006748283711667700400, 0.008997711615560224600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9049646166428158000, 1.000000000000000000), + ( 1.000000000000000000, 0.9182890924393725100, 1.000000000000000000), + ( 1.000000000000000000, 0.9310151417250136500, 1.000000000000000000), + ( 1.000000000000000000, 0.9485183873969286200, 1.000000000000000000), + ( 1.000000000000000000, 0.9541123222108747200, 1.000000000000000000), + ( 1.000000000000000000, 0.9644614097103076900, 1.000000000000000000), + ( 1.000000000000000000, 0.9692326338557822900, 1.000000000000000000), + ( 1.000000000000000000, 0.9778672094228489900, 1.000000000000000000), + ( 1.000000000000000000, 0.9817387080287468500, 1.000000000000000000), + ( 1.000000000000000000, 0.9883897955647028600, 1.000000000000000000), + ( 1.000000000000000000, 0.9911732851407624200, 1.000000000000000000), + ( 1.000000000000000000, 0.9978432803999620600, 1.000000000000000000), + ( 1.000000000000000000, 1.000020405637703600, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12135 = CARTESIAN_POINT ( 'NONE', ( 34.62739849154318300, -31.08741333460231700, 24.36779448291523000 ) ) ; +#12136 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -12.50000000000000500, 10.14164662228683300 ) ) ; +#12137 = CARTESIAN_POINT ( 'NONE', ( 33.79994652905496400, -31.05126520346234300, 25.25651016566292700 ) ) ; +#12138 = CARTESIAN_POINT ( 'NONE', ( 36.64147487587564500, -7.500000000000002700, 24.72287626683878200 ) ) ; +#12139 = CIRCLE ( 'NONE', #1902, 3.189999999999995100 ) ; +#12140 = CARTESIAN_POINT ( 'NONE', ( 19.21346480588962200, -33.38451864986033300, 26.50167843114945400 ) ) ; +#12141 = ORIENTED_EDGE ( 'NONE', *, *, #3581, .T. ) ; +#12142 = CARTESIAN_POINT ( 'NONE', ( 2.460350192238157000, -19.57300738338063100, 9.340524184740061700 ) ) ; +#12143 = CARTESIAN_POINT ( 'NONE', ( 39.82795725296692500, -7.499999999999999100, 21.30031871613233800 ) ) ; +#12144 = LINE ( 'NONE', #5224, #6153 ) ; +#12145 = CARTESIAN_POINT ( 'NONE', ( 6.760030315906330900, -30.93049531478455100, 25.80628712653650300 ) ) ; +#12146 = CARTESIAN_POINT ( 'NONE', ( 33.82011125502869900, -36.41337521272482300, 15.11734417444710700 ) ) ; +#12147 = CARTESIAN_POINT ( 'NONE', ( 7.061026133830363700, -29.78325113723877500, 26.07521809862219100 ) ) ; +#12148 = ORIENTED_EDGE ( 'NONE', *, *, #13575, .T. ) ; +#12149 = EDGE_CURVE ( 'NONE', #12896, #12242, #3642, .T. ) ; +#12150 = CARTESIAN_POINT ( 'NONE', ( 22.39671534393031400, -30.66083845029172000, 28.85693673715478300 ) ) ; +#12151 = CARTESIAN_POINT ( 'NONE', ( 37.50056055429181600, -20.40728933881385700, 7.868621325253868400 ) ) ; +#12152 = CARTESIAN_POINT ( 'NONE', ( 30.16169996200538600, -30.52205176289757200, 27.49701618331360100 ) ) ; +#12153 = CARTESIAN_POINT ( 'NONE', ( 31.08942613950736300, -20.28809933267076800, -20.84135375129621100 ) ) ; +#12154 = CARTESIAN_POINT ( 'NONE', ( 8.632699354335159100, -30.62298913585153300, 26.98793710908098100 ) ) ; +#12155 = CARTESIAN_POINT ( 'NONE', ( 35.82465251542679100, -30.87296836264729500, 22.84933129687572900 ) ) ; +#12156 = LINE ( 'NONE', #4272, #12450 ) ; +#12157 = VERTEX_POINT ( 'NONE', #3385 ) ; +#12158 = CARTESIAN_POINT ( 'NONE', ( 4.765037567496098500, -30.54952549413548700, 24.48252547520692300 ) ) ; +#12159 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12160 = EDGE_LOOP ( 'NONE', ( #10024, #640, #3682, #8153 ) ) ; +#12161 = CARTESIAN_POINT ( 'NONE', ( 25.74388829641202700, -20.42349480786348800, -26.48601920183456200 ) ) ; +#12162 = ADVANCED_FACE ( 'NONE', ( #5382 ), #12101, .T. ) ; +#12163 = CARTESIAN_POINT ( 'NONE', ( 28.89021768622649900, -32.82600074630585900, 25.61142328234056000 ) ) ; +#12164 = CARTESIAN_POINT ( 'NONE', ( 37.88247429062040800, -11.91741274050320400, -18.95475523009077500 ) ) ; +#12165 = CARTESIAN_POINT ( 'NONE', ( 3.166549072115602700, -30.41541846918599000, 21.73023879748950900 ) ) ; +#12166 = FACE_OUTER_BOUND ( 'NONE', #6138, .T. ) ; +#12167 = ORIENTED_EDGE ( 'NONE', *, *, #11547, .T. ) ; +#12168 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 0.0000000000000000000, -19.99999999999999600 ) ) ; +#12169 = CARTESIAN_POINT ( 'NONE', ( 31.91458811303397200, -30.10870580486952600, 26.70888267381873100 ) ) ; +#12170 = CARTESIAN_POINT ( 'NONE', ( 30.10705222385841400, -12.09694102258168200, -25.07167800577086700 ) ) ; +#12171 = CARTESIAN_POINT ( 'NONE', ( 5.006292083434278300, -22.55660445783371400, 7.973076426550748300 ) ) ; +#12172 = CARTESIAN_POINT ( 'NONE', ( 9.124138451505503500, -21.21267839066935700, -21.19850711195981000 ) ) ; +#12173 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9998264493030788500, 0.01862984900630730600 ) ) ; +#12174 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, -25.63802908547507900 ) ) ; +#12175 = ORIENTED_EDGE ( 'NONE', *, *, #4767, .T. ) ; +#12176 = CIRCLE ( 'NONE', #9797, 2.500000000000000400 ) ; +#12177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12178 = CARTESIAN_POINT ( 'NONE', ( 17.54202417807642800, -19.90310473025875000, 23.25381544327383000 ) ) ; +#12179 = CARTESIAN_POINT ( 'NONE', ( 10.75135162933991500, -30.72662666334649400, 27.79613125508037500 ) ) ; +#12180 = CARTESIAN_POINT ( 'NONE', ( 34.70781150172187800, -29.92011393762498300, 24.99055106704464900 ) ) ; +#12181 = CARTESIAN_POINT ( 'NONE', ( 24.49728514442228200, -24.21404407841271200, 19.83061673329015300 ) ) ; +#12182 = CARTESIAN_POINT ( 'NONE', ( 33.76605276433480900, -29.87948044511701800, 25.60211002416141900 ) ) ; +#12183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12184 = ORIENTED_EDGE ( 'NONE', *, *, #9190, .T. ) ; +#12185 = CARTESIAN_POINT ( 'NONE', ( 2.766619397217218200, -20.26983390412175000, 10.81890987976517200 ) ) ; +#12186 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12187 = CARTESIAN_POINT ( 'NONE', ( 6.723599263208164700, -30.18136406119277700, 25.99374377411127000 ) ) ; +#12188 = CARTESIAN_POINT ( 'NONE', ( 37.29646588911086300, -29.30123510853356400, 17.08808682836120600 ) ) ; +#12189 = EDGE_CURVE ( 'NONE', #12057, #5991, #9413, .T. ) ; +#12190 = CARTESIAN_POINT ( 'NONE', ( 8.845770054530264700, -30.27185190334749300, 27.08383322724780500 ) ) ; +#12191 = CARTESIAN_POINT ( 'NONE', ( 4.179262562054235600, -7.500000000000000000, 22.36143813341663400 ) ) ; +#12192 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.677016887642446700, 11.21480977847480500 ) ) ; +#12193 = CARTESIAN_POINT ( 'NONE', ( 37.60235262391393700, -19.58701674744089200, 7.935102628686711200 ) ) ; +#12194 = CARTESIAN_POINT ( 'NONE', ( 30.16701286125892900, -30.73589396939639700, 27.47580842943772300 ) ) ; +#12195 = CARTESIAN_POINT ( 'NONE', ( 34.07776211278485300, -100.0000000000000300, -30.49003124919249100 ) ) ; +#12196 = CARTESIAN_POINT ( 'NONE', ( 8.660773467948722300, -30.22305337966621200, 26.99651656250518500 ) ) ; +#12197 = CARTESIAN_POINT ( 'NONE', ( 36.32270925846365400, -29.82565660957072500, 23.43842311065596500 ) ) ; +#12198 = AXIS2_PLACEMENT_3D ( 'NONE', #6485, #8760, #2070 ) ; +#12199 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -30.66316004086981200, 28.85652737809770600 ) ) ; +#12200 = CARTESIAN_POINT ( 'NONE', ( 4.976247320143867700, -29.47939360600091500, 24.46668720963991800 ) ) ; +#12201 = CARTESIAN_POINT ( 'NONE', ( 25.43535080429903800, -28.03498427470342600, 27.28315096589587400 ) ) ; +#12202 = CARTESIAN_POINT ( 'NONE', ( 7.543814899306805300, -10.30575084698799800, 23.50891570959184700 ) ) ; +#12203 = EDGE_CURVE ( 'NONE', #324, #10743, #13928, .T. ) ; +#12204 = CARTESIAN_POINT ( 'NONE', ( 2.858894401309261200, -29.27344296292117300, 21.92802845171314600 ) ) ; +#12205 = CYLINDRICAL_SURFACE ( 'NONE', #4753, 1.200000000000006600 ) ; +#12206 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12207 = CARTESIAN_POINT ( 'NONE', ( 31.95625007315618800, -30.69551955666484800, 26.68791610703643300 ) ) ; +#12208 = FACE_OUTER_BOUND ( 'NONE', #9823, .T. ) ; +#12209 = CARTESIAN_POINT ( 'NONE', ( 28.94000030396724200, -30.79141697003310400, 27.88292561926774500 ) ) ; +#12210 = ORIENTED_EDGE ( 'NONE', *, *, #5748, .T. ) ; +#12211 = CARTESIAN_POINT ( 'NONE', ( 36.08015754380834000, -9.902760165351853800, 19.31924173151401900 ) ) ; +#12212 = CARTESIAN_POINT ( 'NONE', ( 9.226340363524174700, -23.80465372668483300, 16.91388786925314800 ) ) ; +#12213 = CARTESIAN_POINT ( 'NONE', ( 9.389015933698367200, -12.49999999999994300, -19.96154811084429800 ) ) ; +#12214 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12215 = AXIS2_PLACEMENT_3D ( 'NONE', #6800, #12300, #5675 ) ; +#12216 = FACE_OUTER_BOUND ( 'NONE', #10486, .T. ) ; +#12217 = CARTESIAN_POINT ( 'NONE', ( 37.38360966313121700, -28.91779103443796500, 15.44375112842644200 ) ) ; +#12218 = CARTESIAN_POINT ( 'NONE', ( 34.62229905362740800, -30.86017340942405000, 24.73053494950407600 ) ) ; +#12219 = ORIENTED_EDGE ( 'NONE', *, *, #6901, .F. ) ; +#12220 = CARTESIAN_POINT ( 'NONE', ( 25.86965213763567200, -12.49999999999486100, 21.60710842368554600 ) ) ; +#12221 = EDGE_CURVE ( 'NONE', #4662, #13418, #13911, .T. ) ; +#12222 = CARTESIAN_POINT ( 'NONE', ( 33.81437052179633400, -30.74010860588101900, 25.51712979518762800 ) ) ; +#12223 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12224 = ADVANCED_FACE ( 'NONE', ( #11356 ), #13316, .F. ) ; +#12225 = CARTESIAN_POINT ( 'NONE', ( 3.146138084478604200, -20.86194493947426700, 12.27560240332090300 ) ) ; +#12226 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -19.99999999999987200, 0.0000000000000000000 ) ) ; +#12227 = CARTESIAN_POINT ( 'NONE', ( 7.003402609201624600, -31.14847276727769200, 25.79349415026368700 ) ) ; +#12228 = CARTESIAN_POINT ( 'NONE', ( 1.250890426992048000, -10.42465360765309900, -17.87614535881212400 ) ) ; +#12229 = CARTESIAN_POINT ( 'NONE', ( 36.51434378368698200, -29.89055330658566600, 11.82621063157348800 ) ) ; +#12230 = CARTESIAN_POINT ( 'NONE', ( 17.50067652823596400, -19.90706702945584200, 23.25319916115336800 ) ) ; +#12231 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669238400, 0.9848077530122091300 ) ) ; +#12232 = AXIS2_PLACEMENT_3D ( 'NONE', #8717, #10985, #4202 ) ; +#12233 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -9.617462191788781900, 16.85657865819077400 ) ) ; +#12234 = CARTESIAN_POINT ( 'NONE', ( 37.80139705665175100, -18.79499429939826900, 7.983472301299726400 ) ) ; +#12235 = VERTEX_POINT ( 'NONE', #3616 ) ; +#12236 = CARTESIAN_POINT ( 'NONE', ( 30.16171534459109800, -30.96158404064518200, 27.41956186262595100 ) ) ; +#12237 = CARTESIAN_POINT ( 'NONE', ( 8.732058529670920800, -30.73219210846515300, 27.01329672388107300 ) ) ; +#12238 = CARTESIAN_POINT ( 'NONE', ( 35.76836580397815600, -30.86512997392074500, 23.05778039663336500 ) ) ; +#12239 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12240 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5781, #12497, #301, #8050, #1389, #9186, #2480, #10299, #3596, #11439 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002595784870013038500, 0.005191569740026076900, 0.007787354610039111000, 0.01038313948005214500 ), + .UNSPECIFIED. ) ; +#12241 = ADVANCED_FACE ( 'NONE', ( #5015 ), #2064, .T. ) ; +#12242 = VERTEX_POINT ( 'NONE', #9304 ) ; +#12243 = EDGE_CURVE ( 'NONE', #3667, #876, #13482, .T. ) ; +#12244 = CARTESIAN_POINT ( 'NONE', ( 27.81449499326285500, -20.12955195223270300, 22.23404942590762400 ) ) ; +#12245 = CARTESIAN_POINT ( 'NONE', ( 5.269906059088395300, -30.93949503493787700, 24.50384438165583800 ) ) ; +#12246 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -22.46243069294107600, -27.19746277637471700 ) ) ; +#12247 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -14.31000000000000400 ) ) ; +#12248 = EDGE_LOOP ( 'NONE', ( #4416, #4539, #4562 ) ) ; +#12249 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12250 = CARTESIAN_POINT ( 'NONE', ( 37.98450209408626700, -11.89736398432794600, -18.74592009292170400 ) ) ; +#12251 = CARTESIAN_POINT ( 'NONE', ( 3.590150347120550500, -30.60934352567549500, 21.75652171863082900 ) ) ; +#12252 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13854, #6046, #8329, #1647 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 6.135433673706701800E-005 ), + .UNSPECIFIED. ) ; +#12253 = CARTESIAN_POINT ( 'NONE', ( 26.37928593669104400, -21.19679616727927400, -26.56432256669150100 ) ) ; +#12254 = CARTESIAN_POINT ( 'NONE', ( 31.62531627883852900, -30.14615125602489000, 26.85309617729029300 ) ) ; +#12255 = CARTESIAN_POINT ( 'NONE', ( 28.93943087819405900, -30.82208846743994700, 27.87781086373975700 ) ) ; +#12256 = CARTESIAN_POINT ( 'NONE', ( 36.45103163825575600, -30.55025571725974100, 21.46135594237987100 ) ) ; +#12257 = ORIENTED_EDGE ( 'NONE', *, *, #5944, .F. ) ; +#12258 = CARTESIAN_POINT ( 'NONE', ( 29.36979829358986300, -10.00000000000000400, 24.39439945953259000 ) ) ; +#12259 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, -20.68999999999999400 ) ) ; +#12260 = CARTESIAN_POINT ( 'NONE', ( 15.50655857672032100, -12.50000000000001200, -13.52830381497691700 ) ) ; +#12261 = CARTESIAN_POINT ( 'NONE', ( 2.117525709379618300, -11.91741274050324000, -18.95475523009080000 ) ) ; +#12262 = CARTESIAN_POINT ( 'NONE', ( 3.647382115272359100, -30.44368658337705500, 23.04263642224059800 ) ) ; +#12263 = ORIENTED_EDGE ( 'NONE', *, *, #3155, .F. ) ; +#12264 = CARTESIAN_POINT ( 'NONE', ( 0.2000867490067886900, -10.55636990806773800, -13.04523363253118800 ) ) ; +#12265 = CARTESIAN_POINT ( 'NONE', ( 34.21547052212818600, -29.59744441998674700, 25.15763275557576200 ) ) ; +#12266 = ORIENTED_EDGE ( 'NONE', *, *, #11565, .T. ) ; +#12267 = CARTESIAN_POINT ( 'NONE', ( 23.37303423332784300, -12.50000000000000500, 9.979471170216960700 ) ) ; +#12268 = CARTESIAN_POINT ( 'NONE', ( 33.50968479327092100, -29.65123540269948800, 25.65559146635102600 ) ) ; +#12269 = CARTESIAN_POINT ( 'NONE', ( 3.786585635138134200, -18.96305653767195300, 14.80912730796183800 ) ) ; +#12270 = CARTESIAN_POINT ( 'NONE', ( 7.843109650845262200, -95.07596123493894400, 14.66486205872749200 ) ) ; +#12271 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -27.95660743962444200, 7.441782612476576900 ) ) ; +#12272 = CARTESIAN_POINT ( 'NONE', ( 6.883777403992516100, -30.44275954030438000, 26.10422800913530800 ) ) ; +#12273 = CARTESIAN_POINT ( 'NONE', ( 0.1164120730890424400, -10.46564996487765800, -12.76133817330046400 ) ) ; +#12274 = VERTEX_POINT ( 'NONE', #13806 ) ; +#12275 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -28.03045011180937300, 7.500406277879093000 ) ) ; +#12276 = CARTESIAN_POINT ( 'NONE', ( 12.04218814907928000, -10.08917040577961000, 24.98427685158032600 ) ) ; +#12277 = CARTESIAN_POINT ( 'NONE', ( 28.80103478435169300, -100.0000000000000100, -36.66518970606522000 ) ) ; +#12278 = CARTESIAN_POINT ( 'NONE', ( 37.49908292825531200, -21.21715419022206500, 7.959184153460209500 ) ) ; +#12279 = ORIENTED_EDGE ( 'NONE', *, *, #6478, .F. ) ; +#12280 = CARTESIAN_POINT ( 'NONE', ( 29.75975168695384100, -30.72088314999334100, 27.62629824945259600 ) ) ; +#12281 = CIRCLE ( 'NONE', #13120, 2.500000000000000000 ) ; +#12282 = CARTESIAN_POINT ( 'NONE', ( 0.07785841796037897000, 10.13070237256533100, 0.7097654561682699100 ) ) ; +#12283 = CARTESIAN_POINT ( 'NONE', ( 8.753814595816246300, -30.27891858208153800, 27.04478248569870800 ) ) ; +#12284 = CARTESIAN_POINT ( 'NONE', ( 35.84376042655129900, -29.48897912797532300, 23.73743200209685300 ) ) ; +#12285 = CARTESIAN_POINT ( 'NONE', ( 20.80200324754624200, -19.84147976941892100, 23.26468158655499300 ) ) ; +#12286 = EDGE_CURVE ( 'NONE', #2296, #14018, #3546, .T. ) ; +#12287 = VERTEX_POINT ( 'NONE', #7127 ) ; +#12288 = CARTESIAN_POINT ( 'NONE', ( 35.88853697321124500, -22.64228185804071500, 14.41884793562608600 ) ) ; +#12289 = CARTESIAN_POINT ( 'NONE', ( 5.089399337389471300, -29.96343174387459400, 24.86635751520276500 ) ) ; +#12290 = SECURITY_CLASSIFICATION ( '', '', #131 ) ; +#12291 = FACE_OUTER_BOUND ( 'NONE', #9819, .T. ) ; +#12292 = CARTESIAN_POINT ( 'NONE', ( 28.80256230744221200, -95.07596123493894400, 15.99906820986062800 ) ) ; +#12293 = CARTESIAN_POINT ( 'NONE', ( 35.82073743793770100, -9.999999999999996400, 22.36143813341930600 ) ) ; +#12294 = ORIENTED_EDGE ( 'NONE', *, *, #11277, .T. ) ; +#12295 = AXIS2_PLACEMENT_3D ( 'NONE', #6529, #14328, #7666 ) ; +#12296 = PLANE ( 'NONE', #2020 ) ; +#12297 = CARTESIAN_POINT ( 'NONE', ( 2.572477410358163600, -29.64223768498816400, 21.91613130123623400 ) ) ; +#12298 = CARTESIAN_POINT ( 'NONE', ( 34.12491253683087700, -97.45100691001783800, 19.50932898102632900 ) ) ; +#12299 = CARTESIAN_POINT ( 'NONE', ( 31.66249208888612200, -30.59445595319387600, 26.85235640098055800 ) ) ; +#12300 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12301 = CARTESIAN_POINT ( 'NONE', ( 28.83717021119156600, -30.80702148450148700, 27.91122696686865400 ) ) ; +#12302 = CARTESIAN_POINT ( 'NONE', ( 37.39699239401817000, -29.45205120912802600, 21.72342052645990400 ) ) ; +#12303 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12304 = CARTESIAN_POINT ( 'NONE', ( 6.317899226092984900, -21.72540476143498700, -17.53016005484831700 ) ) ; +#12305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#12306 = EDGE_CURVE ( 'NONE', #876, #2854, #12252, .T. ) ; +#12307 = CARTESIAN_POINT ( 'NONE', ( 3.851747104165807100, -29.29528345027538400, 23.20023048945027000 ) ) ; +#12308 = CIRCLE ( 'NONE', #7032, 2.499999999999998700 ) ; +#12309 = ORIENTED_EDGE ( 'NONE', *, *, #11630, .T. ) ; +#12310 = CARTESIAN_POINT ( 'NONE', ( 12.89617449751449900, -9.904199341311962000, 25.21842031061866900 ) ) ; +#12311 = ADVANCED_FACE ( 'NONE', ( #8015 ), #9212, .T. ) ; +#12312 = CARTESIAN_POINT ( 'NONE', ( 31.64464973587917000, -12.49999999999962700, -18.98354809253725500 ) ) ; +#12313 = CARTESIAN_POINT ( 'NONE', ( 13.18509929449831800, -39.11576237780238300, 19.23299645700123500 ) ) ; +#12314 = CARTESIAN_POINT ( 'NONE', ( 34.39085961634165800, -30.53787190230081100, 25.20349219892703700 ) ) ; +#12315 = ORIENTED_EDGE ( 'NONE', *, *, #11817, .F. ) ; +#12316 = CARTESIAN_POINT ( 'NONE', ( 27.77784225602316700, -24.07351412226441700, 18.82984866064135700 ) ) ; +#12317 = CARTESIAN_POINT ( 'NONE', ( 33.66663818506405900, -30.50599518626362200, 25.73041512125572800 ) ) ; +#12318 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#12319 = CARTESIAN_POINT ( 'NONE', ( 5.212473949794279800, -19.49956486233826800, 16.91079416462451200 ) ) ; +#12320 = CARTESIAN_POINT ( 'NONE', ( 34.49415197117563300, -35.79501342429213700, 14.38048514747097800 ) ) ; +#12321 = CARTESIAN_POINT ( 'NONE', ( 7.009360029844423000, -29.76954460669953000, 26.02736994476350300 ) ) ; +#12322 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -99.99999999999998600, -6.100827442047409100 ) ) ; +#12323 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #10, #6605, #1094, #8885 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 3.816724186526824400 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9623757713646635700, 0.9623757713646635700, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#12324 = CYLINDRICAL_SURFACE ( 'NONE', #13675, 14.99999999999999800 ) ; +#12325 = ORIENTED_EDGE ( 'NONE', *, *, #3983, .T. ) ; +#12326 = CARTESIAN_POINT ( 'NONE', ( 12.67974500759824300, -32.89140275650886700, 27.94704275965034100 ) ) ; +#12327 = CARTESIAN_POINT ( 'NONE', ( 34.68345617790463100, -100.0000000000000100, -28.51501817793796100 ) ) ; +#12328 = EDGE_CURVE ( 'NONE', #834, #9631, #3452, .T. ) ; +#12329 = CARTESIAN_POINT ( 'NONE', ( 37.50025886932379400, -20.39824566277059900, 8.046529031215497300 ) ) ; +#12330 = ORIENTED_EDGE ( 'NONE', *, *, #4652, .T. ) ; +#12331 = CARTESIAN_POINT ( 'NONE', ( 29.75936501705659500, -30.88796989507833900, 27.59291626967428400 ) ) ; +#12332 = CARTESIAN_POINT ( 'NONE', ( 2.833205908801648600, -28.69981206175832300, 18.68579921573415000 ) ) ; +#12333 = CARTESIAN_POINT ( 'NONE', ( 8.936898244311107600, -30.88939028032677200, 27.06053367775796300 ) ) ; +#12334 = CARTESIAN_POINT ( 'NONE', ( 35.84377418882961300, -30.64669686731895800, 23.53259057303898400 ) ) ; +#12335 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12336 = VECTOR ( 'NONE', #13814, 1000.000000000000000 ) ; +#12337 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524033600, 6.754920151478382100 ) ) ; +#12338 = CARTESIAN_POINT ( 'NONE', ( 5.536605888777081900, -31.11986270688945000, 24.50518736361596700 ) ) ; +#12339 = CARTESIAN_POINT ( 'NONE', ( 2.499078828644774000, -19.99631531456677500, 7.905530317961775700 ) ) ; +#12340 = CARTESIAN_POINT ( 'NONE', ( 9.784861605238738500, -12.66549609558534700, -25.08649169343631900 ) ) ; +#12341 = VERTEX_POINT ( 'NONE', #1842 ) ; +#12342 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, -22.50000000000000700, 7.564513562858107500 ) ) ; +#12343 = CARTESIAN_POINT ( 'NONE', ( 3.621378747242591300, -28.90437857078159600, 22.05765950931875000 ) ) ; +#12344 = CARTESIAN_POINT ( 'NONE', ( 22.45910839707759300, -30.66221338081050300, 28.85669429980772100 ) ) ; +#12345 = CARTESIAN_POINT ( 'NONE', ( 31.62711126273202200, -31.08313586518561800, 26.69166819078333200 ) ) ; +#12346 = CARTESIAN_POINT ( 'NONE', ( 30.69264082599105900, -11.99261116098797500, -24.99999999999999600 ) ) ; +#12347 = CARTESIAN_POINT ( 'NONE', ( 28.83674080382883500, -30.82086554209064000, 27.90891095978032200 ) ) ; +#12348 = CARTESIAN_POINT ( 'NONE', ( 36.63261671807023800, -30.48850664640113500, 21.54018838542857500 ) ) ; +#12349 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4159, #9709, #13110, #6404 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001304480043915393500 ), + .UNSPECIFIED. ) ; +#12350 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12351 = CARTESIAN_POINT ( 'NONE', ( 6.590379630993613300, -12.49999999999994000, -16.60754800987469800 ) ) ; +#12352 = CARTESIAN_POINT ( 'NONE', ( 5.023653786882637600, -12.49999999999993100, 11.27125867825076200 ) ) ; +#12353 = CARTESIAN_POINT ( 'NONE', ( 4.154541997258499800, -30.80891521380050000, 23.09761272756783500 ) ) ; +#12354 = EDGE_LOOP ( 'NONE', ( #3009, #6476, #3819 ) ) ; +#12355 = CARTESIAN_POINT ( 'NONE', ( 4.737854640531646000, -10.00000000000000000, 20.22526405804127600 ) ) ; +#12356 = CARTESIAN_POINT ( 'NONE', ( 24.16434516806407400, -12.49999999999999300, -13.89735976076264400 ) ) ; +#12357 = CARTESIAN_POINT ( 'NONE', ( 4.692862573891042100, -34.80666567216017900, 13.32749957311203900 ) ) ; +#12358 = CARTESIAN_POINT ( 'NONE', ( 33.99288786894404500, -29.49811656742728500, 25.24505257616047900 ) ) ; +#12359 = CARTESIAN_POINT ( 'NONE', ( 29.18310465755260500, -12.50000000000020400, 20.13108653376443500 ) ) ; +#12360 = CARTESIAN_POINT ( 'NONE', ( 33.50193063416701000, -31.16883191653638700, 25.37683661964425500 ) ) ; +#12361 = CARTESIAN_POINT ( 'NONE', ( 6.212739330472124300, -19.93385384633640100, 18.06168251348339000 ) ) ; +#12362 = CARTESIAN_POINT ( 'NONE', ( 23.60789971138972700, -39.48871185607167400, 19.80034447343716800 ) ) ; +#12363 = CARTESIAN_POINT ( 'NONE', ( 6.981302337436554600, -30.62375146556854200, 26.12399045172411900 ) ) ; +#12364 = CARTESIAN_POINT ( 'NONE', ( 29.16022420043981000, -100.0000000000000100, 4.680906571415836700 ) ) ; +#12365 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#12366 = EDGE_CURVE ( 'NONE', #1596, #6606, #14217, .T. ) ; +#12367 = CARTESIAN_POINT ( 'NONE', ( 8.788036144576207000, -32.39514169194770700, 24.76042201033213200 ) ) ; +#12368 = CARTESIAN_POINT ( 'NONE', ( 10.39835713388168700, -10.90275089329977500, -25.04283394737410300 ) ) ; +#12369 = EDGE_LOOP ( 'NONE', ( #13585, #13642 ) ) ; +#12370 = CARTESIAN_POINT ( 'NONE', ( 37.59817516569601300, -19.58307227494150400, 8.320095444273105700 ) ) ; +#12371 = CARTESIAN_POINT ( 'NONE', ( 29.55537756494609200, -30.68774479588811500, 27.70099969607974100 ) ) ; +#12372 = CARTESIAN_POINT ( 'NONE', ( 2.500075756955923500, -27.13802799522528300, 7.068143310275326400 ) ) ; +#12373 = CARTESIAN_POINT ( 'NONE', ( 8.936897347001487200, -30.46746680563303800, 27.13493303808185100 ) ) ; +#12374 = CARTESIAN_POINT ( 'NONE', ( 35.50917948327374800, -29.18949264491459400, 23.72327429364295200 ) ) ; +#12375 = CARTESIAN_POINT ( 'NONE', ( 27.18477285430469300, -28.88618851952478300, 28.67212719728810200 ) ) ; +#12376 = VECTOR ( 'NONE', #9606, 1000.000000000000000 ) ; +#12377 = ADVANCED_FACE ( 'NONE', ( #9067 ), #493, .F. ) ; +#12378 = CARTESIAN_POINT ( 'NONE', ( 5.220937675354677200, -30.26713460296008400, 25.00406732740642100 ) ) ; +#12379 = CARTESIAN_POINT ( 'NONE', ( 2.366003869806051300, -10.00577354972706000, 20.10430461088509800 ) ) ; +#12380 = ORIENTED_EDGE ( 'NONE', *, *, #8524, .F. ) ; +#12381 = CARTESIAN_POINT ( 'NONE', ( 15.30652388253455600, -12.49999999999998200, 8.801442155808180300 ) ) ; +#12382 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -27.09143239524033600, 6.754920151478383000 ) ) ; +#12383 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998600, -22.50000000000000700, -11.97268808056955600 ) ) ; +#12384 = EDGE_CURVE ( 'NONE', #8776, #2282, #12349, .T. ) ; +#12385 = CARTESIAN_POINT ( 'NONE', ( 2.693340956819326500, -30.01553343314950000, 22.00473743041005300 ) ) ; +#12386 = CARTESIAN_POINT ( 'NONE', ( 20.77095163207344400, -30.62972060656716200, 28.86242365258489100 ) ) ; +#12387 = CARTESIAN_POINT ( 'NONE', ( 35.15039562463993400, -10.01030339717065100, 22.66968200243133700 ) ) ; +#12388 = CARTESIAN_POINT ( 'NONE', ( 31.55818370395134700, -30.45325446560835300, 26.91219878809976500 ) ) ; +#12389 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12390 = CARTESIAN_POINT ( 'NONE', ( 28.83716901971511200, -30.83578312374652000, 27.90615586090254400 ) ) ; +#12391 = CARTESIAN_POINT ( 'NONE', ( 36.86358471483028200, -29.07591583808984500, 21.85252201175525100 ) ) ; +#12392 = FACE_OUTER_BOUND ( 'NONE', #5205, .T. ) ; +#12393 = CARTESIAN_POINT ( 'NONE', ( 26.85693542387047100, -20.06324773140506300, 22.57593796167897100 ) ) ; +#12394 = CARTESIAN_POINT ( 'NONE', ( 15.12868202000895400, -12.50000000000002500, 8.380800542236105600 ) ) ; +#12395 = CARTESIAN_POINT ( 'NONE', ( 7.086463553254179500, -12.42843905069500300, -24.02805778936025800 ) ) ; +#12396 = ORIENTED_EDGE ( 'NONE', *, *, #3230, .T. ) ; +#12397 = AXIS2_PLACEMENT_3D ( 'NONE', #7347, #719, #8499 ) ; +#12398 = CARTESIAN_POINT ( 'NONE', ( 3.695679887351177100, -29.77849728744908500, 23.43960950929074000 ) ) ; +#12399 = CARTESIAN_POINT ( 'NONE', ( 3.028682005367541000, -19.88192920266432000, 12.16874108319705300 ) ) ; +#12400 = CARTESIAN_POINT ( 'NONE', ( 30.24512827253156600, -21.13841972759997000, -21.72602253775135800 ) ) ; +#12401 = CARTESIAN_POINT ( 'NONE', ( 2.505336113953228400, -27.52383879237498800, 7.098256107181002900 ) ) ; +#12402 = CARTESIAN_POINT ( 'NONE', ( 34.21987752821165400, -30.33777219763029700, 25.38526637348261500 ) ) ; +#12403 = CARTESIAN_POINT ( 'NONE', ( 23.68730362775088600, -12.50000000000002100, 9.832348871285393700 ) ) ; +#12404 = EDGE_CURVE ( 'NONE', #6101, #12287, #1540, .T. ) ; +#12405 = CARTESIAN_POINT ( 'NONE', ( 33.57191662232916900, -30.31996351741569400, 25.81904785879589800 ) ) ; +#12406 = ORIENTED_EDGE ( 'NONE', *, *, #8507, .F. ) ; +#12407 = CARTESIAN_POINT ( 'NONE', ( 10.85500338605002200, -30.82948505043390600, 27.81254583270792600 ) ) ; +#12408 = CARTESIAN_POINT ( 'NONE', ( 7.636222729896549500, -20.26339146881222000, 19.47777040017562600 ) ) ; +#12409 = CARTESIAN_POINT ( 'NONE', ( 26.00066813879444500, -20.01385634412462300, 22.81368892164033800 ) ) ; +#12410 = CARTESIAN_POINT ( 'NONE', ( 34.68867629909625100, -12.49999999999785600, -13.53521317374573500 ) ) ; +#12411 = CARTESIAN_POINT ( 'NONE', ( 7.081746830685576200, -29.84942852373055900, 26.10178325578285200 ) ) ; +#12412 = CARTESIAN_POINT ( 'NONE', ( 39.96757402511678900, -10.12970389953279400, 11.07382073899384900 ) ) ; +#12413 = CARTESIAN_POINT ( 'NONE', ( 3.265465085442378300, -28.80177544115786900, 24.07003930763314900 ) ) ; +#12414 = CARTESIAN_POINT ( 'NONE', ( 9.228361568892644600, -11.87804548896848000, 23.14128055907012500 ) ) ; +#12415 = ORIENTED_EDGE ( 'NONE', *, *, #6699, .F. ) ; +#12416 = CARTESIAN_POINT ( 'NONE', ( 37.76997683670018100, -18.81603826417130800, 8.858231091770020900 ) ) ; +#12417 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 18.70000000000001000 ) ) ; +#12418 = CARTESIAN_POINT ( 'NONE', ( 9.045706593584709400, -31.01274000319902100, 27.06058883968299300 ) ) ; +#12419 = CARTESIAN_POINT ( 'NONE', ( 35.96148469762017900, -30.29288463104812800, 23.82559041807863300 ) ) ; +#12420 = ORIENTED_EDGE ( 'NONE', *, *, #6316, .F. ) ; +#12421 = CARTESIAN_POINT ( 'NONE', ( 31.16707742490120500, -28.26502170359775700, 25.48811332786022300 ) ) ; +#12422 = CARTESIAN_POINT ( 'NONE', ( 23.91932020652911100, -18.48710689488256900, 23.50349406627541500 ) ) ; +#12423 = CARTESIAN_POINT ( 'NONE', ( 5.537330010950220100, -29.37556133778321400, 24.81194025070273700 ) ) ; +#12424 = CARTESIAN_POINT ( 'NONE', ( 13.62324996247971300, -14.46566888762681600, -25.78741791179893600 ) ) ; +#12425 = EDGE_LOOP ( 'NONE', ( #12646, #6821, #9277, #6298 ) ) ; +#12426 = CARTESIAN_POINT ( 'NONE', ( 7.071992325121983400, -23.45551936366671000, 14.41616929880260900 ) ) ; +#12427 = CARTESIAN_POINT ( 'NONE', ( 0.4640065864767268800, -11.85602634590683400, 8.092074866720302900 ) ) ; +#12428 = CARTESIAN_POINT ( 'NONE', ( 34.51239689638112700, -31.43456527745393800, 22.93384712606360100 ) ) ; +#12429 = CARTESIAN_POINT ( 'NONE', ( 3.592746636797947700, -28.95659937067026500, 22.21279314504431200 ) ) ; +#12430 = CARTESIAN_POINT ( 'NONE', ( 39.98584498481541500, 5.611350496477610000, -20.39431017161785000 ) ) ; +#12431 = CARTESIAN_POINT ( 'NONE', ( 16.00664919057089000, -30.65936817455452300, 28.85719598643633100 ) ) ; +#12432 = ORIENTED_EDGE ( 'NONE', *, *, #13836, .F. ) ; +#12433 = CARTESIAN_POINT ( 'NONE', ( 31.54926379300547600, -30.93459062849259300, 26.80814123696929500 ) ) ; +#12434 = CARTESIAN_POINT ( 'NONE', ( 30.19746246564184500, -10.92360276670558300, -25.00000000000000000 ) ) ; +#12435 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457651600, -30.82655086342983700, 27.93782961424065500 ) ) ; +#12436 = CARTESIAN_POINT ( 'NONE', ( 37.17079523175934200, -30.20770447301780600, 21.65312601088703900 ) ) ; +#12437 = CARTESIAN_POINT ( 'NONE', ( 29.30855210097670800, -27.22496805607783400, 20.35723395979836100 ) ) ; +#12438 = CARTESIAN_POINT ( 'NONE', ( 6.061320580833762700, -23.19896570351472700, 12.57906652305681000 ) ) ; +#12439 = VERTEX_POINT ( 'NONE', #892 ) ; +#12440 = CARTESIAN_POINT ( 'NONE', ( 3.603915575612079100, -30.60837917911077000, 21.70041860615500800 ) ) ; +#12441 = LINE ( 'NONE', #12713, #12336 ) ; +#12442 = CARTESIAN_POINT ( 'NONE', ( 4.481301514924327400, -30.95428918456297800, 23.28628432255590400 ) ) ; +#12443 = CARTESIAN_POINT ( 'NONE', ( 17.64922839201820500, -19.56487473887287700, 23.34870917541504600 ) ) ; +#12444 = ORIENTED_EDGE ( 'NONE', *, *, #5487, .T. ) ; +#12445 = CARTESIAN_POINT ( 'NONE', ( 28.83991631689723100, -12.49999999999979200, -21.21653359246503000 ) ) ; +#12446 = CARTESIAN_POINT ( 'NONE', ( 36.53636679993727700, -95.57679412894350400, 12.92977595461171300 ) ) ; +#12447 = CARTESIAN_POINT ( 'NONE', ( 33.99345666688558500, -31.15281866759342900, 24.95402776257876100 ) ) ; +#12448 = CARTESIAN_POINT ( 'NONE', ( 29.35027834729324800, -23.95130997884527300, 17.95798700245902800 ) ) ; +#12449 = CARTESIAN_POINT ( 'NONE', ( 33.43838147409754000, -31.11989292058107600, 25.48313079911931900 ) ) ; +#12450 = VECTOR ( 'NONE', #13166, 1000.000000000000000 ) ; +#12451 = VERTEX_POINT ( 'NONE', #5268 ) ; +#12452 = CARTESIAN_POINT ( 'NONE', ( 10.85465009858362800, -30.76627425346677200, 27.82333348789335400 ) ) ; +#12453 = CARTESIAN_POINT ( 'NONE', ( 9.989251952433948000, -19.13236743527020100, 21.41205246980693400 ) ) ; +#12454 = DIRECTION ( 'NONE', ( 0.02351536899748288600, -0.9997234754775503600, 0.0000000000000000000 ) ) ; +#12455 = CARTESIAN_POINT ( 'NONE', ( 24.94950778916396000, -12.50000000000003600, -12.48793487174587300 ) ) ; +#12456 = FACE_OUTER_BOUND ( 'NONE', #8934, .T. ) ; +#12457 = CARTESIAN_POINT ( 'NONE', ( 7.297993715657135300, -30.88955007301351700, 26.19114966577385700 ) ) ; +#12458 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, -22.50000000000000700, 7.564513562858103900 ) ) ; +#12459 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #4932, #6067 ), + ( #1670, #9465 ), + ( #2765, #10604 ), + ( #3883, #11718 ), + ( #4985, #12827 ), + ( #6112, #13920 ), + ( #7245, #619 ), + ( #8396, #1715 ), + ( #9520, #2810 ), + ( #10652, #3932 ), + ( #11767, #5032 ), + ( #12878, #6163 ), + ( #13972, #7289 ), + ( #667, #8444 ), + ( #1759, #9566 ), + ( #2860, #10695 ), + ( #3974, #11811 ), + ( #5086, #12925 ), + ( #6217, #14023 ), + ( #7344, #715 ), + ( #8497, #1813 ), + ( #9623, #2915 ), + ( #10757, #4025 ), + ( #11867, #5140 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1250000000000001700, 0.1875000000000003100, 0.2500000000000004400, 0.3750000000000003900, 0.4375000000000000600, 0.4999999999999997800, 0.6249999999999997800, 0.6874999999999997800, 0.7499999999999998900, 0.8749999999999998900, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#12460 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000900, 18.70000000000001400 ) ) ; +#12461 = DIRECTION ( 'NONE', ( -0.2855371104760129900, -0.9438078950257489100, -0.1664187964986959000 ) ) ; +#12462 = CARTESIAN_POINT ( 'NONE', ( 0.7632828106709298500, -11.88933994969907600, 11.20263501355816900 ) ) ; +#12463 = CARTESIAN_POINT ( 'NONE', ( 37.30775950907389000, -21.02457537067116900, 10.30589540885700100 ) ) ; +#12464 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999987600, -100.0000000000000100, -5.268163163413117200 ) ) ; +#12465 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12466 = CARTESIAN_POINT ( 'NONE', ( 9.029502953663872200, -30.63064104447486000, 27.16503870592216400 ) ) ; +#12467 = CARTESIAN_POINT ( 'NONE', ( 35.32070511675087200, -29.16088570060815500, 23.86457552906834300 ) ) ; +#12468 = LINE ( 'NONE', #7405, #12790 ) ; +#12469 = ORIENTED_EDGE ( 'NONE', *, *, #10050, .T. ) ; +#12470 = CARTESIAN_POINT ( 'NONE', ( 35.76659580699507000, -31.26311145617022200, 24.40428730933254200 ) ) ; +#12471 = EDGE_CURVE ( 'NONE', #2597, #6338, #2096, .T. ) ; +#12472 = CIRCLE ( 'NONE', #8540, 1.200000000000010200 ) ; +#12473 = CARTESIAN_POINT ( 'NONE', ( 25.66209224060057900, -16.31275490651066600, 23.82954308256683300 ) ) ; +#12474 = CARTESIAN_POINT ( 'NONE', ( 5.608811975912598100, -30.53789090447104800, 25.20346651924145900 ) ) ; +#12475 = ORIENTED_EDGE ( 'NONE', *, *, #74, .F. ) ; +#12476 = CC_DESIGN_SECURITY_CLASSIFICATION ( #12290, ( #46 ) ) ; +#12477 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2102, #11055, #2142, #9964 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.5088892147903028000 ), + .UNSPECIFIED. ) ; +#12478 = CARTESIAN_POINT ( 'NONE', ( 6.385834451800612900, -12.50000000000024200, 15.37116144240544600 ) ) ; +#12479 = CARTESIAN_POINT ( 'NONE', ( 31.04005811973189200, -30.46248392939460800, 27.20179938572244200 ) ) ; +#12480 = AXIS2_PLACEMENT_3D ( 'NONE', #2880, #12941, #6232 ) ; +#12481 = CARTESIAN_POINT ( 'NONE', ( 3.194678767852437300, -30.42568009079695900, 22.04865068238190400 ) ) ; +#12482 = FACE_OUTER_BOUND ( 'NONE', #6264, .T. ) ; +#12483 = CARTESIAN_POINT ( 'NONE', ( 17.55176290734477000, -27.98904416552949200, 27.51060726116870100 ) ) ; +#12484 = EDGE_LOOP ( 'NONE', ( #13, #4519 ) ) ; +#12485 = CARTESIAN_POINT ( 'NONE', ( 31.34678345619187200, -30.29345759581454100, 27.00158637576433000 ) ) ; +#12486 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#12487 = CARTESIAN_POINT ( 'NONE', ( 36.42723385411542800, -28.91037362631564600, 21.99985076036568200 ) ) ; +#12488 = CARTESIAN_POINT ( 'NONE', ( 14.64070171165608200, -100.0000000000000100, 6.300051934314578400 ) ) ; +#12489 = CARTESIAN_POINT ( 'NONE', ( 34.71112221413944400, -28.83925737897886800, 24.47009580472128900 ) ) ; +#12490 = CARTESIAN_POINT ( 'NONE', ( 4.850211094723992000, -31.03045646157288200, 23.74901346542334200 ) ) ; +#12491 = ORIENTED_EDGE ( 'NONE', *, *, #10003, .F. ) ; +#12492 = EDGE_CURVE ( 'NONE', #13418, #498, #6687, .T. ) ; +#12493 = CARTESIAN_POINT ( 'NONE', ( 3.921972796648728100, -30.13924558378403500, 23.75269641097298000 ) ) ; +#12494 = CARTESIAN_POINT ( 'NONE', ( 21.32311356408230600, -19.56721780428155800, 23.26608805034665300 ) ) ; +#12495 = CARTESIAN_POINT ( 'NONE', ( 17.53440631825902000, -19.90322847620980800, 23.25385901016836600 ) ) ; +#12496 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9584, #1779, #10717, #3993 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#12497 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000001400, -7.547827076177279400, 19.13244029395906100 ) ) ; +#12498 = CARTESIAN_POINT ( 'NONE', ( 20.77093538827626400, -30.62972029616819100, 28.86242370731660100 ) ) ; +#12499 = ORIENTED_EDGE ( 'NONE', *, *, #7270, .F. ) ; +#12500 = CARTESIAN_POINT ( 'NONE', ( 23.83694940901288500, -12.49999999999999300, -14.15032988693633200 ) ) ; +#12501 = CARTESIAN_POINT ( 'NONE', ( 39.99726015004258500, -10.00000000000000000, -20.16550224408271000 ) ) ; +#12502 = CARTESIAN_POINT ( 'NONE', ( 33.91675149398851400, -30.12961908250070700, 25.57745406921331700 ) ) ; +#12503 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #46, #13577 ) ; +#12504 = CARTESIAN_POINT ( 'NONE', ( 30.47017438107426600, -12.50000000000008700, 19.20405412981931200 ) ) ; +#12505 = CARTESIAN_POINT ( 'NONE', ( 33.34307610751032100, -30.04186378099068100, 25.92078404905242200 ) ) ; +#12506 = ORIENTED_EDGE ( 'NONE', *, *, #12128, .F. ) ; +#12507 = CARTESIAN_POINT ( 'NONE', ( 11.05988400336675400, -30.84077289956022800, 27.87418558278279300 ) ) ; +#12508 = CARTESIAN_POINT ( 'NONE', ( 11.37309726328946300, -19.44922807722349800, 22.03054141071954300 ) ) ; +#12509 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -95.07596123493894400, 16.93034213569669800 ) ) ; +#12510 = CARTESIAN_POINT ( 'NONE', ( 34.66804893258516500, -22.10327964322920000, -14.81872721402125800 ) ) ; +#12511 = CARTESIAN_POINT ( 'NONE', ( 15.01938337122878200, -12.50000000000002000, 7.896460661148541500 ) ) ; +#12512 = CIRCLE ( 'NONE', #14062, 2.499999999999998700 ) ; +#12513 = CARTESIAN_POINT ( 'NONE', ( 22.35960558233108800, -33.35446909076586800, 26.50697697917620100 ) ) ; +#12514 = CARTESIAN_POINT ( 'NONE', ( 24.69204812251065200, -12.49999999999990200, 8.847370673721728800 ) ) ; +#12515 = CARTESIAN_POINT ( 'NONE', ( 39.99726015004258500, -10.00000000000000000, -20.16550224408271000 ) ) ; +#12516 = EDGE_CURVE ( 'NONE', #8436, #4045, #4536, .T. ) ; +#12517 = CARTESIAN_POINT ( 'NONE', ( 37.02387390247595500, -20.22387671480504400, 11.80773969351855800 ) ) ; +#12518 = CARTESIAN_POINT ( 'NONE', ( 37.41397862649090200, -10.00000000000000000, 20.65015935807152300 ) ) ; +#12519 = CARTESIAN_POINT ( 'NONE', ( 9.243852124090732800, -31.01957320784564900, 27.14724162546621900 ) ) ; +#12520 = CARTESIAN_POINT ( 'NONE', ( 35.80507021060223100, -30.05410925050002600, 24.09355670097131600 ) ) ; +#12521 = VERTEX_POINT ( 'NONE', #9851 ) ; +#12522 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -14.31000000000000400 ) ) ; +#12523 = ADVANCED_FACE ( 'NONE', ( #1742 ), #69, .F. ) ; +#12524 = CARTESIAN_POINT ( 'NONE', ( 26.86265631324358000, -12.43589736410883400, 24.57048557246852000 ) ) ; +#12525 = CARTESIAN_POINT ( 'NONE', ( 5.784145142837053800, -29.59748641971088300, 25.15758636735663600 ) ) ; +#12526 = CARTESIAN_POINT ( 'NONE', ( 0.4733282993695794300, -11.89383339415170000, 7.888251474045569400 ) ) ; +#12527 = CARTESIAN_POINT ( 'NONE', ( 22.49264576486651300, -27.96523496585092200, 27.45710953202296900 ) ) ; +#12528 = CARTESIAN_POINT ( 'NONE', ( 25.30230289955806800, -33.06212212019125500, 28.26783952480306200 ) ) ; +#12529 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -22.50000000000002100, 7.564513562858098600 ) ) ; +#12530 = CARTESIAN_POINT ( 'NONE', ( 3.194621638521007800, -29.18859482988126800, 22.26410362364454800 ) ) ; +#12531 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12532 = CARTESIAN_POINT ( 'NONE', ( 31.36585558277722900, -30.74438162868729000, 26.96422889120390900 ) ) ; +#12533 = CARTESIAN_POINT ( 'NONE', ( 37.44745577497550200, -29.87040936400211400, 21.82274442282091100 ) ) ; +#12534 = CARTESIAN_POINT ( 'NONE', ( 9.846286255644304900, -22.03500000000001400, 17.72092232754241800 ) ) ; +#12535 = CARTESIAN_POINT ( 'NONE', ( 34.04464616147261300, -21.29327107680890000, 17.51175982159713800 ) ) ; +#12536 = CARTESIAN_POINT ( 'NONE', ( 7.009366960608446100, -31.16642684550733500, 25.78104358935840400 ) ) ; +#12537 = CARTESIAN_POINT ( 'NONE', ( 4.480059170863259300, -29.11674313540610700, 23.61088891289965000 ) ) ; +#12538 = CARTESIAN_POINT ( 'NONE', ( 35.25289780099188200, -16.36238563118257300, -21.30417193390045600 ) ) ; +#12539 = CARTESIAN_POINT ( 'NONE', ( 36.65592812321887800, -19.85336026735905800, 13.17613830234574300 ) ) ; +#12540 = FACE_OUTER_BOUND ( 'NONE', #11097, .T. ) ; +#12541 = CARTESIAN_POINT ( 'NONE', ( 16.23018175347830500, -12.49999999999998600, 9.790863285365468000 ) ) ; +#12542 = CARTESIAN_POINT ( 'NONE', ( 27.77354943619183900, -20.92527423261119400, -23.24518769043253000 ) ) ; +#12543 = CARTESIAN_POINT ( 'NONE', ( 35.89348307670528000, -12.14537491121956900, -21.78170133422383300 ) ) ; +#12544 = ORIENTED_EDGE ( 'NONE', *, *, #2585, .T. ) ; +#12545 = CARTESIAN_POINT ( 'NONE', ( 24.13175562492601500, -12.50000000000002300, 9.517438801171527600 ) ) ; +#12546 = CARTESIAN_POINT ( 'NONE', ( 33.34307972257186500, -30.87401390338563100, 25.77406648291155400 ) ) ; +#12547 = CARTESIAN_POINT ( 'NONE', ( 11.06044858930703800, -30.81021179934003100, 27.87986634651298000 ) ) ; +#12548 = CARTESIAN_POINT ( 'NONE', ( 12.78788509928397900, -19.72717115147167600, 22.52265280058879100 ) ) ; +#12549 = CARTESIAN_POINT ( 'NONE', ( 6.169291961895071500, -12.49999999999978000, -15.81394171573776800 ) ) ; +#12550 = CARTESIAN_POINT ( 'NONE', ( 38.03362124210735800, -10.00000000000000200, -23.10976506005338700 ) ) ; +#12551 = CARTESIAN_POINT ( 'NONE', ( 34.00295860757831400, -12.49999999999984700, -15.44496081396159100 ) ) ; +#12552 = CARTESIAN_POINT ( 'NONE', ( 5.252184192105271000, -22.84615651767897000, 10.04797851815151300 ) ) ; +#12553 = EDGE_CURVE ( 'NONE', #498, #10929, #7857, .T. ) ; +#12554 = CIRCLE ( 'NONE', #2442, 2.500000000000000900 ) ; +#12555 = CARTESIAN_POINT ( 'NONE', ( -3.811648262644350000E-018, 9.723952627011019700, 19.19887574203256600 ) ) ; +#12556 = CARTESIAN_POINT ( 'NONE', ( 5.877901470468015300, -94.71789415299375000, 15.72994732997640100 ) ) ; +#12557 = CARTESIAN_POINT ( 'NONE', ( 36.66191651015010000, -19.53428028828797000, 13.31493463149156400 ) ) ; +#12558 = ORIENTED_EDGE ( 'NONE', *, *, #13873, .F. ) ; +#12559 = CARTESIAN_POINT ( 'NONE', ( 29.36979829358994100, -10.00000000000000000, -27.92093907370168500 ) ) ; +#12560 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12561 = CARTESIAN_POINT ( 'NONE', ( 9.228360859959382300, -30.72943748057426900, 27.23438732693720600 ) ) ; +#12562 = CARTESIAN_POINT ( 'NONE', ( 35.34069857130602800, -30.98061529364705200, 23.55973512428245800 ) ) ; +#12563 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #11173, #1173, ( #7933 ) ) ; +#12564 = CARTESIAN_POINT ( 'NONE', ( 16.43441120390376000, -31.27268910019936100, 28.74904970931771700 ) ) ; +#12565 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000900, 17.50000000000000400 ) ) ; +#12566 = CARTESIAN_POINT ( 'NONE', ( 5.887825176127108800, -30.90087560277428800, 25.15110219248626700 ) ) ; +#12567 = CARTESIAN_POINT ( 'NONE', ( 2.563012123391914500, -11.97697067856998200, -19.82834543978316300 ) ) ; +#12568 = CARTESIAN_POINT ( 'NONE', ( 17.44237873759179500, -27.96664356504568300, 27.45669629622856800 ) ) ; +#12569 = ORIENTED_EDGE ( 'NONE', *, *, #2814, .F. ) ; +#12570 = EDGE_CURVE ( 'NONE', #10929, #6546, #4192, .T. ) ; +#12571 = CARTESIAN_POINT ( 'NONE', ( 3.775743605670979900, -30.71748455777505500, 22.31297900794455900 ) ) ; +#12572 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2391, #211, #11344, #4617, #12446, #5732, #13546, #6861, #251, #8003 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.2500000000000000000, 0.5000000000000000000, 0.7500000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#12573 = CARTESIAN_POINT ( 'NONE', ( 31.24268110239048100, -30.24922253651792700, 27.04288185840666300 ) ) ; +#12574 = DIRECTION ( 'NONE', ( 0.9770050802323010400, 0.03617104466858166200, 0.2101255070853094400 ) ) ; +#12575 = CARTESIAN_POINT ( 'NONE', ( 7.263441089603233500, -30.48583907341044600, 26.31937323916474000 ) ) ; +#12576 = CARTESIAN_POINT ( 'NONE', ( 36.39596250333698200, -30.60849042276598900, 21.70076572735053600 ) ) ; +#12577 = CARTESIAN_POINT ( 'NONE', ( 6.646494699878918900, -100.0000000000000100, 0.2282800123429903300 ) ) ; +#12578 = ORIENTED_EDGE ( 'NONE', *, *, #5428, .F. ) ; +#12579 = CARTESIAN_POINT ( 'NONE', ( 34.71111801651677800, -26.17331379032051700, 15.91021289079512100 ) ) ; +#12580 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 8.673617379884037400E-016 ) ) ; +#12581 = CARTESIAN_POINT ( 'NONE', ( 9.342184288008875000, -31.01026710824984200, 27.19440054952318400 ) ) ; +#12582 = CARTESIAN_POINT ( 'NONE', ( 4.098710922772182700, -30.45272750950995900, 23.75881715264550200 ) ) ; +#12583 = CARTESIAN_POINT ( 'NONE', ( 28.94207316100944300, -8.313603519823576700, -24.70264280037322300 ) ) ; +#12584 = VERTEX_POINT ( 'NONE', #11030 ) ; +#12585 = CARTESIAN_POINT ( 'NONE', ( 10.92099956469642700, -9.937265368628642300, -24.99999999999999600 ) ) ; +#12586 = ADVANCED_FACE ( 'NONE', ( #4672 ), #7297, .T. ) ; +#12587 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457636700, -30.82655086342985500, 27.93782961424069800 ) ) ; +#12588 = CARTESIAN_POINT ( 'NONE', ( 26.75464442235145100, -12.49999999999999100, -22.19486857163807200 ) ) ; +#12589 = CARTESIAN_POINT ( 'NONE', ( 34.52281898643262500, -10.00000000000000000, -25.99239124071760200 ) ) ; +#12590 = EDGE_LOOP ( 'NONE', ( #8260, #13959, #13298, #6482 ) ) ; +#12591 = CARTESIAN_POINT ( 'NONE', ( 31.31504968242159500, -23.72924213819795400, 16.37440195103991100 ) ) ; +#12592 = EDGE_CURVE ( 'NONE', #13700, #4019, #10463, .T. ) ; +#12593 = CARTESIAN_POINT ( 'NONE', ( 33.18092552599180300, -29.77984051893254100, 25.91997082323210900 ) ) ; +#12594 = CARTESIAN_POINT ( 'NONE', ( 11.16272045892647700, -30.83579645259204600, 27.90612748139979600 ) ) ; +#12595 = CARTESIAN_POINT ( 'NONE', ( 14.24398252758308700, -19.97634247969810100, 22.88649595880836100 ) ) ; +#12596 = CARTESIAN_POINT ( 'NONE', ( 15.11128490128938200, -12.50000000000000500, -12.73294771315947000 ) ) ; +#12597 = CARTESIAN_POINT ( 'NONE', ( 24.86480201248524200, -12.50000000000004800, -12.80882377251473300 ) ) ; +#12598 = VERTEX_POINT ( 'NONE', #9836 ) ; +#12599 = CARTESIAN_POINT ( 'NONE', ( 22.40557478599585300, -19.87093624336284800, 23.25948761544214000 ) ) ; +#12600 = CARTESIAN_POINT ( 'NONE', ( 23.64562332769385500, -95.07596123493893000, 17.89374687354343500 ) ) ; +#12601 = CARTESIAN_POINT ( 'NONE', ( 11.97358604983500500, -95.07596123493894400, 16.23804165349339700 ) ) ; +#12602 = CARTESIAN_POINT ( 'NONE', ( 35.73253862370426500, -18.98491668415101300, 15.71209296735184500 ) ) ; +#12603 = ORIENTED_EDGE ( 'NONE', *, *, #5682, .T. ) ; +#12604 = CARTESIAN_POINT ( 'NONE', ( 34.12352999470715500, -20.27601653518514300, -21.26476011218271700 ) ) ; +#12605 = CARTESIAN_POINT ( 'NONE', ( 0.0008912669290430723300, -10.00000000000000000, -20.10968513441623900 ) ) ; +#12606 = CARTESIAN_POINT ( 'NONE', ( 9.243082442848178800, -30.38395534799431300, 27.26110565537787900 ) ) ; +#12607 = CARTESIAN_POINT ( 'NONE', ( 35.62048384271633900, -29.73738963577200800, 24.16214217075152600 ) ) ; +#12608 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.23105625617652200, 7.788262581895225800 ) ) ; +#12609 = VERTEX_POINT ( 'NONE', #10981 ) ; +#12610 = CARTESIAN_POINT ( 'NONE', ( 7.188881062596940400, -20.29911644375522100, 19.04993543948440000 ) ) ; +#12611 = CARTESIAN_POINT ( 'NONE', ( 5.827144187097697900, -30.01419266318609000, 25.38428292217037800 ) ) ; +#12612 = CARTESIAN_POINT ( 'NONE', ( 28.04782666479172100, -24.05959689164592400, 18.72870163410438200 ) ) ; +#12613 = CARTESIAN_POINT ( 'NONE', ( 4.536077190445409400, -9.999999999999996400, -22.55926456751271300 ) ) ; +#12614 = CARTESIAN_POINT ( 'NONE', ( 17.35109806680339900, -97.51638476426644800, 22.06849998229720800 ) ) ; +#12615 = CARTESIAN_POINT ( 'NONE', ( 9.534748526347574000, -10.00000000000000000, -27.40150186913824700 ) ) ; +#12616 = ORIENTED_EDGE ( 'NONE', *, *, #8390, .F. ) ; +#12617 = CARTESIAN_POINT ( 'NONE', ( 2.962814922933118700, -29.63475385661194700, 22.50304009300310800 ) ) ; +#12618 = FACE_OUTER_BOUND ( 'NONE', #4283, .T. ) ; +#12619 = CARTESIAN_POINT ( 'NONE', ( 31.26839462177515800, -30.64907469942903300, 27.02968631473811100 ) ) ; +#12620 = CARTESIAN_POINT ( 'NONE', ( 7.361099607609095800, -29.86706223595886900, 26.26612553321524500 ) ) ; +#12621 = CARTESIAN_POINT ( 'NONE', ( 37.37479420211733600, -29.53473157943965100, 21.93600883102852700 ) ) ; +#12622 = ORIENTED_EDGE ( 'NONE', *, *, #4500, .T. ) ; +#12623 = AXIS2_PLACEMENT_3D ( 'NONE', #2031, #9842, #3135 ) ; +#12624 = CARTESIAN_POINT ( 'NONE', ( 37.46455191607138600, -27.92767768373569100, 12.44568864452988400 ) ) ; +#12625 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#12626 = CARTESIAN_POINT ( 'NONE', ( 4.374952234023879800, -29.32291913942765000, 23.77689180399509500 ) ) ; +#12627 = VECTOR ( 'NONE', #13878, 1000.000000000000000 ) ; +#12628 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, -17.49999999999999600 ) ) ; +#12629 = CARTESIAN_POINT ( 'NONE', ( 5.088720535349436200, -95.07595903904592700, 13.36836896548074800 ) ) ; +#12630 = ORIENTED_EDGE ( 'NONE', *, *, #11839, .T. ) ; +#12631 = CARTESIAN_POINT ( 'NONE', ( 10.27109506145613200, -10.69443754031940600, -24.99999999999792900 ) ) ; +#12632 = LINE ( 'NONE', #5037, #1314 ) ; +#12633 = CARTESIAN_POINT ( 'NONE', ( 26.37675003751881100, -14.46566888762966300, -25.78741791179943400 ) ) ; +#12634 = CARTESIAN_POINT ( 'NONE', ( 11.06613091374230100, -30.83150405162027100, 27.89921777869494700 ) ) ; +#12635 = CARTESIAN_POINT ( 'NONE', ( 23.37551826938064900, -12.50000000000001200, -14.38659309299795200 ) ) ; +#12636 = EDGE_CURVE ( 'NONE', #8198, #6546, #7668, .T. ) ; +#12637 = CARTESIAN_POINT ( 'NONE', ( 30.11168608858248400, -9.999999999999996400, -24.92500689800329300 ) ) ; +#12638 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4419, #6609, #12250 ), + ( #5520, #13355, #6655 ), + ( #62, #7801, #1151 ), + ( #8936, #2234, #10059 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.007035967796410351500, 0.007319481458798665800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8085845259241117900, 1.000000000000000000), + ( 1.000000000000000000, 0.8037303671282474100, 1.000000000000000000), + ( 1.000000000000000000, 0.7987533414942040700, 1.000000000000000000), + ( 1.000000000000000000, 0.7936517277408197100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12639 = CARTESIAN_POINT ( 'NONE', ( 32.97634466459467000, -12.49999999999592900, 16.44996191184417000 ) ) ; +#12640 = CARTESIAN_POINT ( 'NONE', ( 33.29805722562819900, -30.60164044488213300, 25.95288928331203200 ) ) ; +#12641 = CARTESIAN_POINT ( 'NONE', ( 11.16314596555223200, -30.82199791980384900, 27.90868450137944000 ) ) ; +#12642 = CARTESIAN_POINT ( 'NONE', ( 16.21696746215826600, -19.18426300403835000, 23.35614730397117400 ) ) ; +#12643 = CARTESIAN_POINT ( 'NONE', ( 5.311270752328513600, -22.11577842672542700, -14.73022333640855000 ) ) ; +#12644 = CARTESIAN_POINT ( 'NONE', ( 33.77026498992127300, -21.75023334258303700, -17.35086996860642800 ) ) ; +#12645 = LINE ( 'NONE', #4701, #12627 ) ; +#12646 = ORIENTED_EDGE ( 'NONE', *, *, #13520, .T. ) ; +#12647 = AXIS2_PLACEMENT_3D ( 'NONE', #14245, #7579, #931 ) ; +#12648 = CARTESIAN_POINT ( 'NONE', ( 13.60417654205158700, -21.19133290371638300, -26.55977083539271200 ) ) ; +#12649 = CARTESIAN_POINT ( 'NONE', ( 29.89134014114094000, -94.71799171677312800, 17.58980862092449700 ) ) ; +#12650 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998200, -95.07596123493895800, 17.89388302653839700 ) ) ; +#12651 = CARTESIAN_POINT ( 'NONE', ( 34.06966184944448600, -20.41744578051211400, 17.62588044290196300 ) ) ; +#12652 = EDGE_LOOP ( 'NONE', ( #6314, #3632, #11860, #9320 ) ) ; +#12653 = CARTESIAN_POINT ( 'NONE', ( 12.55071511963986800, -11.82299608802447100, 24.55975004240576000 ) ) ; +#12654 = CARTESIAN_POINT ( 'NONE', ( 9.330871508275846400, -30.83092033587424700, 27.25275495343720400 ) ) ; +#12655 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12458, #13555, #261 ), + ( #8014, #1357, #9147 ), + ( #2441, #10271, #3561 ), + ( #11401, #4670, #12511 ), + ( #5796, #13605, #6920 ), + ( #313, #8064, #1402 ), + ( #9199, #2495, #10311 ), + ( #3609, #11453, #4714 ), + ( #12552, #5847, #13654 ), + ( #6966, #358, #8116 ), + ( #1446, #9244, #2543 ), + ( #10361, #3651, #11496 ), + ( #4765, #117, #7854 ), + ( #1206, #8993, #2292 ), + ( #10120, #3404, #11246 ), + ( #4518, #12352, #5630 ), + ( #13453, #6761, #165 ), + ( #7900, #1243, #9039 ), + ( #2338, #10165, #3448 ), + ( #11295, #4561, #12394 ), + ( #5679, #13497, #6805 ), + ( #205, #7951, #1286 ), + ( #9084, #2385, #10211 ), + ( #3492, #11337, #4609 ), + ( #12438, #5725, #13540 ), + ( #6852, #243, #7995 ), + ( #1334, #10151, #3439 ), + ( #11283, #4550, #12381 ), + ( #5668, #13486, #6793 ), + ( #195, #7938, #1275 ), + ( #9074, #2372, #10200 ), + ( #3480, #11326, #4596 ), + ( #12426, #5712, #13528 ), + ( #6838, #230, #7981 ), + ( #1319, #9116, #2412 ), + ( #10242, #3527, #11369 ), + ( #4640, #12478, #5762 ), + ( #13572, #6887, #280 ), + ( #8029, #1371, #9165 ), + ( #2459, #10285, #3577 ), + ( #11416, #5060, #12901 ), + ( #6191, #13996, #7317 ), + ( #691, #8470, #1787 ), + ( #9593, #2888, #10724 ), + ( #3998, #11837, #5113 ), + ( #12947, #6240, #14048 ), + ( #7371, #740, #8522 ), + ( #1841, #9650, #2942 ), + ( #10784, #4053, #11891 ), + ( #5166, #13006, #6293 ), + ( #14104, #7433, #794 ), + ( #8577, #1895, #9707 ), + ( #2997, #10841, #4108 ), + ( #11945, #5219, #13058 ), + ( #6350, #468, #8236 ), + ( #1562, #9358, #2652 ), + ( #10482, #3769, #11609 ), + ( #4873, #12714, #6010 ), + ( #13815, #7133, #519 ), + ( #8285, #1608, #9404 ), + ( #2706, #10533, #3816 ), + ( #11658, #4917, #12761 ), + ( #6053, #13862, #7178 ), + ( #562, #8335, #1654 ), + ( #9450, #2750, #10588 ), + ( #3865, #11705, #4969 ), + ( #12809, #6098, #13905 ), + ( #7229, #602, #8381 ), + ( #1701, #9503, #2797 ), + ( #10637, #3916, #11751 ), + ( #5017, #12863, #6146 ), + ( #13956, #7275, #651 ), + ( #8427, #1744, #9554 ), + ( #2843, #10681, #3961 ), + ( #11798, #5069, #12909 ), + ( #6203, #14006, #7328 ), + ( #701, #8480, #1797 ), + ( #9605, #2898, #10737 ), + ( #4010, #11847, #5122 ), + ( #12958, #6249, #14060 ), + ( #7385, #751, #8531 ), + ( #1852, #9660, #2952 ), + ( #10796, #6185, #13991 ), + ( #7312, #686, #8464 ), + ( #1782, #9587, #2883 ), + ( #10720, #3995, #11834 ), + ( #5107, #12944, #6234 ), + ( #14044, #7366, #735 ), + ( #8518, #1835, #9645 ), + ( #2936, #10779, #4047 ), + ( #11886, #5161, #13000 ), + ( #6288, #14098, #7429 ), + ( #789, #8572, #1890 ), + ( #9702, #2991, #10837 ), + ( #4104, #11941, #5214 ), + ( #13053, #6345, #14155 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.602085213965210600E-018, 0.0002478943548996560700, 0.0004957887097993147500, 0.0005112821069805434000, 0.0005267755041617721700, 0.0005577622985242294800, 0.0006197358872491441100, 0.0007436830646989733700, 0.0007746698590614306800, 0.0008056566534238879900, 0.0008676302421488027300, 0.0009915774195986321000, 0.001115524597048461600, 0.001239471774498290800, 0.001363418951948120100, 0.001487366129397949300, 0.001518352923760406600, 0.001549339718122864000, 0.001611313306847778600, 0.001735260484297608100, 0.001983154839197266800, 0.002014141633559724300, 0.002045128427922181400, 0.002107102016647096500, 0.002231049194096925700, 0.002262035988459382800, 0.002293022782821840400, 0.002354996371546755000, 0.002478943548996584200, 0.002509930343359041300, 0.002540917137721498900, 0.002602890726446413500, 0.002726837903896242800, 0.002974732258795901300, 0.002990225655977129800, 0.003005719053158358400, 0.003036705847520815900, 0.003098679436245730500, 0.003222626613695559800, 0.003238120010876788300, 0.003253613408058016900, 0.003284600202420474400, 0.003346573791145389000, 0.003470520968595218700, 0.003532494557320133400, 0.003594468146045048400, 0.003718415323494877700, 0.003966309678394536200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7052297219197475300, 1.000000000000000000), + ( 1.000000000000000000, 0.7032282252471630000, 1.000000000000000000), + ( 1.000000000000000000, 0.6992280272002532300, 1.000000000000000000), + ( 1.000000000000000000, 0.6972372806095420400, 1.000000000000000000), + ( 1.000000000000000000, 0.6952564113900704400, 1.000000000000000000), + ( 1.000000000000000000, 0.6951413325236307500, 1.000000000000000000), + ( 1.000000000000000000, 0.6948865736779966700, 1.000000000000000000), + ( 1.000000000000000000, 0.6947605268951441100, 1.000000000000000000), + ( 1.000000000000000000, 0.6943856990167329700, 1.000000000000000000), + ( 1.000000000000000000, 0.6941402161161397400, 1.000000000000000000), + ( 1.000000000000000000, 0.6934124688369541800, 1.000000000000000000), + ( 1.000000000000000000, 0.6929388172635035900, 1.000000000000000000), + ( 1.000000000000000000, 0.6915243319962527400, 1.000000000000000000), + ( 1.000000000000000000, 0.6905930644351950800, 1.000000000000000000), + ( 1.000000000000000000, 0.6893451973195111600, 1.000000000000000000), + ( 1.000000000000000000, 0.6890960248201675200, 1.000000000000000000), + ( 1.000000000000000000, 0.6886177479026832600, 1.000000000000000000), + ( 1.000000000000000000, 0.6883777845502575500, 1.000000000000000000), + ( 1.000000000000000000, 0.6876561468227389000, 1.000000000000000000), + ( 1.000000000000000000, 0.6871727144703690900, 1.000000000000000000), + ( 1.000000000000000000, 0.6857216611457832600, 1.000000000000000000), + ( 1.000000000000000000, 0.6847575325334247500, 1.000000000000000000), + ( 1.000000000000000000, 0.6828793766446186200, 1.000000000000000000), + ( 1.000000000000000000, 0.6819476404239729300, 1.000000000000000000), + ( 1.000000000000000000, 0.6800827424628093100, 1.000000000000000000), + ( 1.000000000000000000, 0.6791572055216309500, 1.000000000000000000), + ( 1.000000000000000000, 0.6773508648978220400, 1.000000000000000000), + ( 1.000000000000000000, 0.6764376998648709000, 1.000000000000000000), + ( 1.000000000000000000, 0.6746709492331963700, 1.000000000000000000), + ( 1.000000000000000000, 0.6738006480246807600, 1.000000000000000000), + ( 1.000000000000000000, 0.6727017041166452000, 1.000000000000000000), + ( 1.000000000000000000, 0.6724760775476024100, 1.000000000000000000), + ( 1.000000000000000000, 0.6720609772602426100, 1.000000000000000000), + ( 1.000000000000000000, 0.6718523156750594300, 1.000000000000000000), + ( 1.000000000000000000, 0.6712234992148711200, 1.000000000000000000), + ( 1.000000000000000000, 0.6708004901241660900, 1.000000000000000000), + ( 1.000000000000000000, 0.6695248902737372900, 1.000000000000000000), + ( 1.000000000000000000, 0.6686655518859429000, 1.000000000000000000), + ( 1.000000000000000000, 0.6661090057010903300, 1.000000000000000000), + ( 1.000000000000000000, 0.6644562683931378700, 1.000000000000000000), + ( 1.000000000000000000, 0.6627897734497133500, 1.000000000000000000), + ( 1.000000000000000000, 0.6626100487055822700, 1.000000000000000000), + ( 1.000000000000000000, 0.6622349778688189100, 1.000000000000000000), + ( 1.000000000000000000, 0.6620476812111111300, 1.000000000000000000), + ( 1.000000000000000000, 0.6614871951033832700, 1.000000000000000000), + ( 1.000000000000000000, 0.6611154097524684100, 1.000000000000000000), + ( 1.000000000000000000, 0.6600112577597591100, 1.000000000000000000), + ( 1.000000000000000000, 0.6592903681515457400, 1.000000000000000000), + ( 1.000000000000000000, 0.6584248224864911500, 1.000000000000000000), + ( 1.000000000000000000, 0.6582578166991972500, 1.000000000000000000), + ( 1.000000000000000000, 0.6578973861819856800, 1.000000000000000000), + ( 1.000000000000000000, 0.6577221044960228600, 1.000000000000000000), + ( 1.000000000000000000, 0.6572070481842775500, 1.000000000000000000), + ( 1.000000000000000000, 0.6568779308629969500, 1.000000000000000000), + ( 1.000000000000000000, 0.6559108088086652600, 1.000000000000000000), + ( 1.000000000000000000, 0.6552941941456762500, 1.000000000000000000), + ( 1.000000000000000000, 0.6544964899695352400, 1.000000000000000000), + ( 1.000000000000000000, 0.6543270349030655400, 1.000000000000000000), + ( 1.000000000000000000, 0.6540336168878034800, 1.000000000000000000), + ( 1.000000000000000000, 0.6538867780267323400, 1.000000000000000000), + ( 1.000000000000000000, 0.6534463639113584600, 1.000000000000000000), + ( 1.000000000000000000, 0.6531528774292318900, 1.000000000000000000), + ( 1.000000000000000000, 0.6522772350600090100, 1.000000000000000000), + ( 1.000000000000000000, 0.6517000486623877300, 1.000000000000000000), + ( 1.000000000000000000, 0.6500467715400053400, 1.000000000000000000), + ( 1.000000000000000000, 0.6490488598795990400, 1.000000000000000000), + ( 1.000000000000000000, 0.6481531943898227700, 1.000000000000000000), + ( 1.000000000000000000, 0.6481010825443261900, 1.000000000000000000), + ( 1.000000000000000000, 0.6479980081210682300, 1.000000000000000000), + ( 1.000000000000000000, 0.6479381625452621500, 1.000000000000000000), + ( 1.000000000000000000, 0.6477709587222592000, 1.000000000000000000), + ( 1.000000000000000000, 0.6476638776282271900, 1.000000000000000000), + ( 1.000000000000000000, 0.6473523402557511700, 1.000000000000000000), + ( 1.000000000000000000, 0.6471574513092757100, 1.000000000000000000), + ( 1.000000000000000000, 0.6465937178858267600, 1.000000000000000000), + ( 1.000000000000000000, 0.6462463168023224700, 1.000000000000000000), + ( 1.000000000000000000, 0.6458515582682131700, 1.000000000000000000), + ( 1.000000000000000000, 0.6458076344642532700, 1.000000000000000000), + ( 1.000000000000000000, 0.6457195018783442600, 1.000000000000000000), + ( 1.000000000000000000, 0.6456811327613166700, 1.000000000000000000), + ( 1.000000000000000000, 0.6455606973106501300, 1.000000000000000000), + ( 1.000000000000000000, 0.6454816600118732400, 1.000000000000000000), + ( 1.000000000000000000, 0.6452487080598099400, 1.000000000000000000), + ( 1.000000000000000000, 0.6450989645322873200, 1.000000000000000000), + ( 1.000000000000000000, 0.6446692830761464600, 1.000000000000000000), + ( 1.000000000000000000, 0.6444092037240829500, 1.000000000000000000), + ( 1.000000000000000000, 0.6440657170547384700, 1.000000000000000000), + ( 1.000000000000000000, 0.6439633518339867900, 1.000000000000000000), + ( 1.000000000000000000, 0.6437644617561307800, 1.000000000000000000), + ( 1.000000000000000000, 0.6436704196162280600, 1.000000000000000000), + ( 1.000000000000000000, 0.6434072280615249500, 1.000000000000000000), + ( 1.000000000000000000, 0.6432572805163192500, 1.000000000000000000), + ( 1.000000000000000000, 0.6428992069530565800, 1.000000000000000000), + ( 1.000000000000000000, 0.6427854661421953400, 1.000000000000000000), + ( 1.000000000000000000, 0.6427876096865420300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12656 = CARTESIAN_POINT ( 'NONE', ( 35.49215950884674000, -30.75526432686889300, 23.87324989181481900 ) ) ; +#12657 = CARTESIAN_POINT ( 'NONE', ( 17.56238715496506200, -28.77726908290566100, 29.18906083666153600 ) ) ; +#12658 = EDGE_CURVE ( 'NONE', #8229, #7893, #2582, .T. ) ; +#12659 = FACE_OUTER_BOUND ( 'NONE', #8048, .T. ) ; +#12660 = ADVANCED_FACE ( 'NONE', ( #4342 ), #9602, .F. ) ; +#12661 = ORIENTED_EDGE ( 'NONE', *, *, #6654, .F. ) ; +#12662 = CARTESIAN_POINT ( 'NONE', ( 2.510095214717651800, -21.18391915094051800, 8.365931698723295900 ) ) ; +#12663 = CARTESIAN_POINT ( 'NONE', ( 11.31186559264341100, -11.14063917059260900, 24.45614895767105800 ) ) ; +#12664 = CARTESIAN_POINT ( 'NONE', ( 6.241815529560493100, -31.14525443802045500, 25.18231311478108800 ) ) ; +#12665 = CARTESIAN_POINT ( 'NONE', ( 34.34065172132985600, -23.05856870340484100, 11.56735646789506700 ) ) ; +#12666 = CARTESIAN_POINT ( 'NONE', ( 5.477181013565724400, -10.00000000000000000, -25.99239124071894100 ) ) ; +#12667 = CARTESIAN_POINT ( 'NONE', ( 7.548970513088947100, -97.46883387410083800, 20.20483725917246800 ) ) ; +#12668 = CARTESIAN_POINT ( 'NONE', ( 17.64922839201822300, -20.43512526112675300, -26.87524878958415500 ) ) ; +#12669 = ORIENTED_EDGE ( 'NONE', *, *, #5706, .T. ) ; +#12670 = CARTESIAN_POINT ( 'NONE', ( 3.954779519694221300, -30.79587550838858700, 22.48806932535300600 ) ) ; +#12671 = CARTESIAN_POINT ( 'NONE', ( 31.24275156078331500, -31.06237867927699600, 26.89966190330402200 ) ) ; +#12672 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 5.018561128876299000, -19.99999999999999600 ) ) ; +#12673 = CARTESIAN_POINT ( 'NONE', ( 7.459118799852748600, -30.65844157524552200, 26.39012451518720000 ) ) ; +#12674 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #12138, #3232, #5449 ), + ( #13288, #6584, #14381 ), + ( #7724, #1076, #8864 ), + ( #2163, #9984, #3270 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.009414676679434090900, 0.01024624484336172400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865379100, 1.000000000000000000), + ( 1.000000000000000000, 0.7145999924689536700, 1.000000000000000000), + ( 1.000000000000000000, 0.7232339863001439100, 1.000000000000000000), + ( 1.000000000000000000, 0.7307095185408971600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12675 = CARTESIAN_POINT ( 'NONE', ( 36.46333896361120700, -30.58779976079504000, 21.75936271417966600 ) ) ; +#12676 = CYLINDRICAL_SURFACE ( 'NONE', #12215, 2.499999999999998700 ) ; +#12677 = CARTESIAN_POINT ( 'NONE', ( 22.37520809154654700, -31.29794767387815600, 28.74459719137827900 ) ) ; +#12678 = EDGE_CURVE ( 'NONE', #2183, #8423, #3291, .T. ) ; +#12679 = CARTESIAN_POINT ( 'NONE', ( 4.516888792626227600, -30.83994746843973200, 23.69806003804691100 ) ) ; +#12680 = CARTESIAN_POINT ( 'NONE', ( 28.70531755221648500, -9.357860782073967000, 25.00000000000000400 ) ) ; +#12681 = ORIENTED_EDGE ( 'NONE', *, *, #8108, .F. ) ; +#12682 = CARTESIAN_POINT ( 'NONE', ( 10.03692150536375000, -11.63703386741717300, -25.06010869432982000 ) ) ; +#12683 = CARTESIAN_POINT ( 'NONE', ( 24.92256855700758700, -12.50000000000003700, -12.63003686760988100 ) ) ; +#12684 = CARTESIAN_POINT ( 'NONE', ( 29.37888136572511800, -20.15621387050601100, -25.37249145760431200 ) ) ; +#12685 = CARTESIAN_POINT ( 'NONE', ( 6.421817001901233700, -28.44686014199984900, 24.09836129719760900 ) ) ; +#12686 = CARTESIAN_POINT ( 'NONE', ( 26.03896467025351000, -20.83497214882052600, -23.88968448153213200 ) ) ; +#12687 = CARTESIAN_POINT ( 'NONE', ( 28.30512299098352000, -19.16026030647531900, 22.27565212450808100 ) ) ; +#12688 = CARTESIAN_POINT ( 'NONE', ( 24.56493469816443600, -12.49999999999999300, 9.017637776527227100 ) ) ; +#12689 = CARTESIAN_POINT ( 'NONE', ( 32.99031577055775700, -29.76959418481829900, 26.02735817162916700 ) ) ; +#12690 = CARTESIAN_POINT ( 'NONE', ( 4.404710869770394100, -30.68603640415237900, 13.69970711763519200 ) ) ; +#12691 = CARTESIAN_POINT ( 'NONE', ( 11.16272164137988200, -30.80704089628956400, 27.91119820631510300 ) ) ; +#12692 = CARTESIAN_POINT ( 'NONE', ( 17.73898379964085600, -19.43727008918985900, 23.34430151098837300 ) ) ; +#12693 = CARTESIAN_POINT ( 'NONE', ( 5.312202775650066900, -12.50000000000027900, -13.53863464347033300 ) ) ; +#12694 = CARTESIAN_POINT ( 'NONE', ( 34.34691417967139400, -21.94478174760815700, -15.95739838873495500 ) ) ; +#12695 = CARTESIAN_POINT ( 'NONE', ( 32.49407894768426500, -12.50000000000044800, -17.98323396746821200 ) ) ; +#12696 = VERTEX_POINT ( 'NONE', #11057 ) ; +#12697 = CARTESIAN_POINT ( 'NONE', ( 22.40381502064839500, -27.98811812773923800, 27.51073861932902900 ) ) ; +#12698 = CARTESIAN_POINT ( 'NONE', ( 31.67258956865812900, -95.07596123493894400, 14.88435550435060700 ) ) ; +#12699 = CARTESIAN_POINT ( 'NONE', ( 29.86026232716335500, -30.59140337616874600, 27.60211084820959500 ) ) ; +#12700 = CARTESIAN_POINT ( 'NONE', ( 36.42420708895955500, -30.56058678584843900, 21.45953493765683700 ) ) ; +#12701 = EDGE_CURVE ( 'NONE', #6638, #11029, #13655, .T. ) ; +#12702 = CARTESIAN_POINT ( 'NONE', ( 33.09902247185920700, -19.89993385406182100, 18.80099778413065800 ) ) ; +#12703 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -3.469446951953614200E-015, 20.00000000000000000 ) ) ; +#12704 = CARTESIAN_POINT ( 'NONE', ( 9.334414548275992400, -30.51296719242519000, 27.30042990797088000 ) ) ; +#12705 = CARTESIAN_POINT ( 'NONE', ( 35.27782303037685100, -29.34629091366802100, 24.12295198654513600 ) ) ; +#12706 = CARTESIAN_POINT ( 'NONE', ( 17.60328854700514300, -30.66083836454518500, 28.85693675227420800 ) ) ; +#12707 = CARTESIAN_POINT ( 'NONE', ( 14.86230028141327300, -16.83719489812273600, 23.79441806710751800 ) ) ; +#12708 = CIRCLE ( 'NONE', #4612, 3.189999999999995100 ) ; +#12709 = CARTESIAN_POINT ( 'NONE', ( 2.500183889925400700, -21.22235360604237200, 7.876884797643984200 ) ) ; +#12710 = CARTESIAN_POINT ( 'NONE', ( 37.46431803972872400, -90.76369240601827900, -2.724612049315034800 ) ) ; +#12711 = CARTESIAN_POINT ( 'NONE', ( 6.059141113437920700, -30.33658405624981600, 25.57262341630999100 ) ) ; +#12712 = EDGE_LOOP ( 'NONE', ( #666, #13216 ) ) ; +#12713 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, 51.02052347080197600, -11.74043533514387100 ) ) ; +#12714 = CARTESIAN_POINT ( 'NONE', ( 9.506995549201887400, -12.49999999999981300, 19.18530656941381500 ) ) ; +#12715 = CARTESIAN_POINT ( 'NONE', ( 3.028682005367543200, -20.11807079733532400, -15.69528069736617800 ) ) ; +#12716 = CARTESIAN_POINT ( 'NONE', ( 3.091969261743236200, -30.01736524055402500, 22.66958341903714600 ) ) ; +#12717 = CARTESIAN_POINT ( 'NONE', ( 31.06782259718191200, -30.55940021473519900, 27.12966968622447400 ) ) ; +#12718 = CARTESIAN_POINT ( 'NONE', ( 3.182996520331552200, -18.67547602301134900, -17.24221584592820400 ) ) ; +#12719 = CARTESIAN_POINT ( 'NONE', ( 7.529875109484584600, -29.96587420555718100, 26.38978626181578900 ) ) ; +#12720 = CARTESIAN_POINT ( 'NONE', ( 36.85823833366239200, -29.17350110613766400, 22.16092132778639000 ) ) ; +#12721 = LINE ( 'NONE', #1798, #12376 ) ; +#12722 = CARTESIAN_POINT ( 'NONE', ( 1.049725030082771600, -14.19890012033099100, 8.005331014629295100 ) ) ; +#12723 = ORIENTED_EDGE ( 'NONE', *, *, #3877, .F. ) ; +#12724 = CARTESIAN_POINT ( 'NONE', ( 4.264240979133279400, -29.79459310387475300, 24.08355606743283400 ) ) ; +#12725 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#12726 = CARTESIAN_POINT ( 'NONE', ( 34.21379392389634700, -17.58882759138289100, -22.13086528616543400 ) ) ; +#12727 = CARTESIAN_POINT ( 'NONE', ( 17.51939907316887000, -33.18018381368953800, 28.41270817586502100 ) ) ; +#12728 = CARTESIAN_POINT ( 'NONE', ( 25.20327044524363600, -20.44373961990505600, -26.84151307448078000 ) ) ; +#12729 = ADVANCED_FACE ( 'NONE', ( #1068 ), #3627, .T. ) ; +#12730 = CARTESIAN_POINT ( 'NONE', ( 2.361686564097695800, -29.58712697336445200, 23.14186042258437900 ) ) ; +#12731 = CARTESIAN_POINT ( 'NONE', ( 25.09165735170598700, -12.49999999999999600, -22.67066069545512600 ) ) ; +#12732 = CARTESIAN_POINT ( 'NONE', ( 36.88319935832378600, -18.93343692360949100, 13.14802665262677400 ) ) ; +#12733 = FACE_OUTER_BOUND ( 'NONE', #3131, .T. ) ; +#12734 = CARTESIAN_POINT ( 'NONE', ( 33.89693922543769800, -23.21130824478603600, 12.66929801996782100 ) ) ; +#12735 = CARTESIAN_POINT ( 'NONE', ( 33.11590096115978800, -30.44272343595274000, 26.10416346082182700 ) ) ; +#12736 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #14145, #6335, #3036, #10881, #4145, #11986, #5256, #13098, #6390, #14197, #7525, #882, #8670, #1977, #9795, #3091, #10933, #4200, #12033, #5307, #13147, #6441, #14242, #7574 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 4.019137928674449200E-016, 0.0008040687096071853100, 0.001206103064410578300, 0.001608137419213971000, 0.001708646007914821200, 0.001809154596615671000, 0.001909663185316521300, 0.002010171774017371300, 0.002211188951419075700, 0.002412206128820779600, 0.002814240483624188000, 0.003216274838427597200 ), + .UNSPECIFIED. ) ; +#12737 = CARTESIAN_POINT ( 'NONE', ( 2.532271770814194900, -28.17430490410048100, 12.01230829561957600 ) ) ; +#12738 = ORIENTED_EDGE ( 'NONE', *, *, #8713, .F. ) ; +#12739 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001100, 27.93780948130460100 ) ) ; +#12740 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.723972447247820800, 19.19885073465396600 ) ) ; +#12741 = CARTESIAN_POINT ( 'NONE', ( 25.76778274224841100, -20.82025714208805700, -23.99392848273210500 ) ) ; +#12742 = EDGE_CURVE ( 'NONE', #6575, #5671, #4365, .T. ) ; +#12743 = CARTESIAN_POINT ( 'NONE', ( 31.47476282179483000, -30.18764430668679900, 26.93509804291798600 ) ) ; +#12744 = CARTESIAN_POINT ( 'NONE', ( 8.056627639132537800, -99.99999999999998600, -33.98982960013366700 ) ) ; +#12745 = EDGE_LOOP ( 'NONE', ( #8245, #5424, #14368, #13830, #2628, #3358, #11112 ) ) ; +#12746 = CARTESIAN_POINT ( 'NONE', ( 30.82842526509576000, -19.46160359113789100, 20.79145059827345000 ) ) ; +#12747 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000900, 18.70000000000001400 ) ) ; +#12748 = CARTESIAN_POINT ( 'NONE', ( 37.49944835869821000, -21.21984131747930000, 7.920870232712987400 ) ) ; +#12749 = CARTESIAN_POINT ( 'NONE', ( 9.636213091709564100, -30.94044776072294000, 27.34582554784945100 ) ) ; +#12750 = CARTESIAN_POINT ( 'NONE', ( 35.59577337241120900, -30.39339014238275600, 24.21763964168691200 ) ) ; +#12751 = ORIENTED_EDGE ( 'NONE', *, *, #4300, .F. ) ; +#12752 = AXIS2_PLACEMENT_3D ( 'NONE', #4111, #11949, #5222 ) ; +#12753 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, -15.51856112887629800 ) ) ; +#12754 = CARTESIAN_POINT ( 'NONE', ( 32.66976522323383800, -94.72976632545554300, 16.45206955038145900 ) ) ; +#12755 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #11094, #9960, #12201, #5473 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.004319406882189834700 ), + .UNSPECIFIED. ) ; +#12756 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -27.09143239524033600, 6.754920151478383000 ) ) ; +#12757 = CARTESIAN_POINT ( 'NONE', ( 34.03704839105324000, -9.659918111394780700, 25.00000000000000400 ) ) ; +#12758 = CARTESIAN_POINT ( 'NONE', ( 6.250585280235929600, -29.56201486658722600, 25.44944958687090900 ) ) ; +#12759 = VERTEX_POINT ( 'NONE', #13317 ) ; +#12760 = CARTESIAN_POINT ( 'NONE', ( 41.95206956439373200, -10.00000000000000400, 7.890944223064053600 ) ) ; +#12761 = CARTESIAN_POINT ( 'NONE', ( 16.16305059098659000, -12.49999999999999300, 9.742155369224526900 ) ) ; +#12762 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -22.50000000000001400, 10.14164662228683000 ) ) ; +#12763 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 14.31000000000000900 ) ) ; +#12764 = EDGE_CURVE ( 'NONE', #7173, #13700, #2759, .T. ) ; +#12765 = CARTESIAN_POINT ( 'NONE', ( -1.951887260574977700, -9.999999999999994700, 8.039215728769535800 ) ) ; +#12766 = ORIENTED_EDGE ( 'NONE', *, *, #5902, .T. ) ; +#12767 = CARTESIAN_POINT ( 'NONE', ( 31.05707726005156000, -30.96504125584328500, 27.03362526639827100 ) ) ; +#12768 = CARTESIAN_POINT ( 'NONE', ( 7.866873077180788000, -30.89936585066403300, 26.51676440443466700 ) ) ; +#12769 = CARTESIAN_POINT ( 'NONE', ( 36.85829081433749400, -30.40366519142694900, 21.94166768676067700 ) ) ; +#12770 = ORIENTED_EDGE ( 'NONE', *, *, #3214, .F. ) ; +#12771 = CARTESIAN_POINT ( 'NONE', ( 11.98487419884252400, -10.15232558920095800, 24.97314088877156000 ) ) ; +#12772 = CARTESIAN_POINT ( 'NONE', ( 4.744590503762986500, -31.00980704071783500, 23.62663412814625400 ) ) ; +#12773 = CARTESIAN_POINT ( 'NONE', ( 40.00000002490161700, -10.00000000622538500, -11.53324907984486500 ) ) ; +#12774 = CARTESIAN_POINT ( 'NONE', ( 39.62932080532542000, -10.86946591185317200, -13.95234904921730000 ) ) ; +#12775 = CARTESIAN_POINT ( 'NONE', ( 22.56123850041398900, -19.88642326305406600, 23.25678856832246000 ) ) ; +#12776 = CARTESIAN_POINT ( 'NONE', ( 12.95093844489441500, -30.77347370972987400, 28.36765821957191100 ) ) ; +#12777 = CARTESIAN_POINT ( 'NONE', ( 37.79857499854667700, -18.80570000581315100, 0.0000000000000000000 ) ) ; +#12778 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -22.46243069294108000, -27.19746277637472100 ) ) ; +#12779 = ORIENTED_EDGE ( 'NONE', *, *, #13265, .F. ) ; +#12780 = CARTESIAN_POINT ( 'NONE', ( 22.91574498866769700, -12.49999999999999300, -14.51404747963377400 ) ) ; +#12781 = CARTESIAN_POINT ( 'NONE', ( 37.45624828115710200, -28.01188937973182600, 13.03537412708537600 ) ) ; +#12782 = CARTESIAN_POINT ( 'NONE', ( 34.70046128481373400, -12.49999999999964100, 12.60211205347111200 ) ) ; +#12783 = EDGE_CURVE ( 'NONE', #8198, #2701, #12872, .T. ) ; +#12784 = CARTESIAN_POINT ( 'NONE', ( 32.99628643660587800, -31.14836093463971900, 25.79354391704824700 ) ) ; +#12785 = ORIENTED_EDGE ( 'NONE', *, *, #5203, .F. ) ; +#12786 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001400, 27.93780948130459400 ) ) ; +#12787 = CARTESIAN_POINT ( 'NONE', ( 32.51144939311049600, -22.15857009492001200, -23.29844460632829600 ) ) ; +#12788 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, -94.39240458593477000, 1.716929485264722800 ) ) ; +#12789 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 51.02052347080197600, 0.9909638431422791400 ) ) ; +#12790 = VECTOR ( 'NONE', #766, 1000.000000000000000 ) ; +#12791 = CARTESIAN_POINT ( 'NONE', ( 33.76673996746033900, -29.55625157356017500, 25.45027581703260800 ) ) ; +#12792 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999943200, -97.51638471114853200, 22.06850012136332500 ) ) ; +#12793 = ORIENTED_EDGE ( 'NONE', *, *, #10237, .T. ) ; +#12794 = CARTESIAN_POINT ( 'NONE', ( 29.56220950777293100, -19.13834455072595400, 21.65004338786383900 ) ) ; +#12795 = PLANE ( 'NONE', #11364 ) ; +#12796 = CARTESIAN_POINT ( 'NONE', ( 34.55005398464921000, -20.46682371693205500, 17.03734493240797200 ) ) ; +#12797 = CARTESIAN_POINT ( 'NONE', ( 9.630591678959524100, -30.68065015157542100, 27.40643059774069100 ) ) ; +#12798 = CARTESIAN_POINT ( 'NONE', ( 35.15059909551234100, -29.20360747811872000, 24.07223922636938300 ) ) ; +#12799 = FACE_OUTER_BOUND ( 'NONE', #2668, .T. ) ; +#12800 = VERTEX_POINT ( 'NONE', #6753 ) ; +#12801 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.50836345810913000, 10.00775520641746800 ) ) ; +#12802 = CARTESIAN_POINT ( 'NONE', ( 28.58817408774960000, -93.16207229034434100, 22.15580643127850600 ) ) ; +#12803 = ADVANCED_FACE ( 'NONE', ( #6602 ), #160, .T. ) ; +#12804 = CARTESIAN_POINT ( 'NONE', ( 27.17148525954417300, -11.54987650896777900, 24.72671495470525800 ) ) ; +#12805 = CARTESIAN_POINT ( 'NONE', ( 7.124769990124508300, -20.86570712388416400, 18.86206652551273100 ) ) ; +#12806 = CARTESIAN_POINT ( 'NONE', ( 30.66706813076699600, -10.65702438076541700, 24.00350305883735700 ) ) ; +#12807 = CARTESIAN_POINT ( 'NONE', ( 6.156055235396007900, -30.55399358205395900, 25.59014518874566200 ) ) ; +#12808 = CARTESIAN_POINT ( 'NONE', ( 39.52654859821984000, -11.89362202030247900, 8.032724285584896200 ) ) ; +#12809 = CARTESIAN_POINT ( 'NONE', ( 12.22645056381496600, -24.07472576738773300, 18.83701317272425500 ) ) ; +#12810 = CARTESIAN_POINT ( 'NONE', ( 37.98450209408630900, -11.89736398432789200, -18.74592009292171500 ) ) ; +#12811 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.723972447247824400, 1.698850734653959600 ) ) ; +#12812 = CARTESIAN_POINT ( 'NONE', ( 0.005446228514986345200, -9.999999999999882800, 8.464720091036008800 ) ) ; +#12813 = CIRCLE ( 'NONE', #3693, 2.500000000000002700 ) ; +#12814 = VERTEX_POINT ( 'NONE', #2331 ) ; +#12815 = CARTESIAN_POINT ( 'NONE', ( 30.95909262889021800, -30.40884785429242100, 27.17818014292541700 ) ) ; +#12816 = FACE_OUTER_BOUND ( 'NONE', #6995, .T. ) ; +#12817 = CARTESIAN_POINT ( 'NONE', ( 11.55188414069010800, -28.67366141914101600, 28.34865685376302800 ) ) ; +#12818 = CARTESIAN_POINT ( 'NONE', ( 7.866876562661353500, -30.27212679874622800, 26.62737449404936300 ) ) ; +#12819 = CARTESIAN_POINT ( 'NONE', ( 36.36354071988232300, -28.96860743876772700, 22.31640925142273300 ) ) ; +#12820 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #9680, #4085, #11920 ), + ( #5195, #13036, #6325 ), + ( #14135, #7463, #826 ), + ( #8609, #1919, #9736 ), + ( #3025, #10871, #4136 ), + ( #11974, #5244, #13086 ), + ( #6380, #14185, #7514 ), + ( #873, #8658, #1969 ), + ( #9783, #3078, #10923 ), + ( #4187, #12021, #5296 ), + ( #13136, #6426, #14231 ), + ( #7564, #915, #8706 ), + ( #2015, #9829, #3124 ), + ( #10975, #4235, #12070 ), + ( #5343, #13182, #6473 ), + ( #14273, #7611, #961 ), + ( #8749, #2057, #9877 ), + ( #3167, #11011, #4287 ), + ( #12113, #5385, #13225 ), + ( #6517, #14315, #7653 ), + ( #1009, #8797, #2100 ), + ( #9925, #3210, #11052 ), + ( #4326, #12161, #5425 ), + ( #13269, #6561, #14359 ), + ( #7700, #1050, #8842 ), + ( #2140, #9962, #3251 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 5.789639601072593700E-017, 0.004940758413101624000, 0.007411137619652407400, 0.009881516826203190800, 0.01482227523930475600, 0.01729265444585553800, 0.01976303365240632300, 0.02470379206550789000, 0.02717417127205867100, 0.02964455047860945600, 0.03211492968516023400, 0.03458530889171102000, 0.03952606730481259000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9925120726376610600, 1.000000000000000000), + ( 1.000000000000000000, 0.9918527427132118900, 1.000000000000000000), + ( 1.000000000000000000, 0.9911644437026375700, 1.000000000000000000), + ( 1.000000000000000000, 0.9900923719734959800, 1.000000000000000000), + ( 1.000000000000000000, 0.9897288277848418400, 1.000000000000000000), + ( 1.000000000000000000, 0.9889899593281584700, 1.000000000000000000), + ( 1.000000000000000000, 0.9886125668380727500, 1.000000000000000000), + ( 1.000000000000000000, 0.9874864940291870900, 1.000000000000000000), + ( 1.000000000000000000, 0.9867417695451842200, 1.000000000000000000), + ( 1.000000000000000000, 0.9856456698582494200, 1.000000000000000000), + ( 1.000000000000000000, 0.9852841155867356800, 1.000000000000000000), + ( 1.000000000000000000, 0.9845718503214738700, 1.000000000000000000), + ( 1.000000000000000000, 0.9842256493578290800, 1.000000000000000000), + ( 1.000000000000000000, 0.9832262894821983700, 1.000000000000000000), + ( 1.000000000000000000, 0.9826102082478118700, 1.000000000000000000), + ( 1.000000000000000000, 0.9817790143753598600, 1.000000000000000000), + ( 1.000000000000000000, 0.9815166490477522700, 1.000000000000000000), + ( 1.000000000000000000, 0.9810379802527580100, 1.000000000000000000), + ( 1.000000000000000000, 0.9808201664821965000, 1.000000000000000000), + ( 1.000000000000000000, 0.9804288735597392900, 1.000000000000000000), + ( 1.000000000000000000, 0.9802554437131020300, 1.000000000000000000), + ( 1.000000000000000000, 0.9799558648345146900, 1.000000000000000000), + ( 1.000000000000000000, 0.9798292993849054800, 1.000000000000000000), + ( 1.000000000000000000, 0.9795264399443771600, 1.000000000000000000), + ( 1.000000000000000000, 0.9794315536287404600, 1.000000000000000000), + ( 1.000000000000000000, 0.9794413969150828100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12821 = CARTESIAN_POINT ( 'NONE', ( 22.35960558233108800, -33.35446909076586800, 26.50697697917620100 ) ) ; +#12822 = ORIENTED_EDGE ( 'NONE', *, *, #14329, .F. ) ; +#12823 = CARTESIAN_POINT ( 'NONE', ( 4.273921783465485000, -30.11785402443393500, 24.18515607344495400 ) ) ; +#12824 = CARTESIAN_POINT ( 'NONE', ( 15.42928826067710300, -39.41424078494384300, 19.70383002183679400 ) ) ; +#12825 = CARTESIAN_POINT ( 'NONE', ( 28.23955314646853100, -9.781278341185066300, -27.49999999999992200 ) ) ; +#12826 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12827 = CARTESIAN_POINT ( 'NONE', ( 34.58955302715498400, -100.0000000000000100, -2.838808089234959600 ) ) ; +#12828 = CIRCLE ( 'NONE', #388, 10.00000000000000000 ) ; +#12829 = CARTESIAN_POINT ( 'NONE', ( 29.55503871649008500, -30.82150269284369400, 27.67987103770378700 ) ) ; +#12830 = CARTESIAN_POINT ( 'NONE', ( 35.76222343527890500, -100.0000000000000700, 18.19436829881265500 ) ) ; +#12831 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#12832 = CARTESIAN_POINT ( 'NONE', ( 22.52427676907571200, -28.77904418886634000, 29.18874783758641200 ) ) ; +#12833 = EDGE_LOOP ( 'NONE', ( #4974, #9306, #3620, #14318, #8123 ) ) ; +#12834 = CARTESIAN_POINT ( 'NONE', ( 22.90740363857482000, -20.76351822418377700, -24.39789867027078400 ) ) ; +#12835 = EDGE_CURVE ( 'NONE', #4588, #12800, #8600, .T. ) ; +#12836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12837 = CARTESIAN_POINT ( 'NONE', ( 24.82915544779285700, -12.50000000000001800, 8.501545090440577800 ) ) ; +#12838 = CARTESIAN_POINT ( 'NONE', ( 32.99939106129232200, -30.23031376652338800, 26.16349685080710000 ) ) ; +#12839 = CARTESIAN_POINT ( 'NONE', ( 2.201425001453305900, -18.80570000581308300, -11.53187062879840900 ) ) ; +#12840 = ORIENTED_EDGE ( 'NONE', *, *, #3095, .F. ) ; +#12841 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#12842 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -21.23116646380275400, -11.74895849411027100 ) ) ; +#12843 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12844 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2728, #8209, #11677, #4942, #12781, #6071, #13882, #7199, #578, #8353, #1677, #9472, #2772, #10611 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( -3.014604540357180400E-005, 0.003778343861709724800, 0.007586833768823022000, 0.009491078722379664800, 0.01139532367593631300, 0.01329956862949296100, 0.01520381358304960900 ), + .UNSPECIFIED. ) ; +#12845 = CYLINDRICAL_SURFACE ( 'NONE', #939, 10.00000000000000000 ) ; +#12846 = PLANE ( 'NONE', #13470 ) ; +#12847 = CARTESIAN_POINT ( 'NONE', ( 35.19788329206184600, -29.19050233619587700, 24.01393719758313600 ) ) ; +#12848 = CARTESIAN_POINT ( 'NONE', ( 16.29412393078820600, -99.99999999999998600, 21.63052375797860100 ) ) ; +#12849 = ORIENTED_EDGE ( 'NONE', *, *, #11911, .F. ) ; +#12850 = CARTESIAN_POINT ( 'NONE', ( 27.66630485847058200, -20.02567045366996700, 22.30912451368037700 ) ) ; +#12851 = PLANE ( 'NONE', #4671 ) ; +#12852 = CARTESIAN_POINT ( 'NONE', ( 9.838196359610041200, -30.96184000780773000, 27.41931531264031500 ) ) ; +#12853 = CARTESIAN_POINT ( 'NONE', ( 35.60674597896657900, -30.14050137848132800, 24.31040770016322100 ) ) ; +#12854 = EDGE_LOOP ( 'NONE', ( #14313, #11435, #159, #12069, #1061, #3986, #8839 ) ) ; +#12855 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000260100, -95.04538050747028400, 6.962711608201945300 ) ) ; +#12856 = EDGE_CURVE ( 'NONE', #12521, #12126, #13264, .T. ) ; +#12857 = CARTESIAN_POINT ( 'NONE', ( 23.69159489663321900, -97.51638471103098000, 22.06850012138405100 ) ) ; +#12858 = CARTESIAN_POINT ( 'NONE', ( 28.02513815208548600, -10.14508343418421700, 24.97441787609948300 ) ) ; +#12859 = CARTESIAN_POINT ( 'NONE', ( 13.99953127095436200, -20.01384545781222000, 22.81373943744310800 ) ) ; +#12860 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23105625617643700, -11.53187062879840700 ) ) ; +#12861 = CARTESIAN_POINT ( 'NONE', ( 6.310112152543966100, -29.64463513732568200, 25.53713018697295600 ) ) ; +#12862 = CARTESIAN_POINT ( 'NONE', ( 39.99455371812121000, -10.00000000000091300, 8.464722378275762800 ) ) ; +#12863 = CARTESIAN_POINT ( 'NONE', ( 11.98210909032562900, -12.50000000000002000, 20.78016040425719500 ) ) ; +#12864 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12865 = CARTESIAN_POINT ( 'NONE', ( 0.6044989104536376800, -11.89066080456654700, 10.18297576297695900 ) ) ; +#12866 = ORIENTED_EDGE ( 'NONE', *, *, #12636, .T. ) ; +#12867 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 1, ( + ( #240, #9128 ), + ( #2422, #10254 ), + ( #3537, #11379 ), + ( #4648, #12488 ), + ( #5772, #13582 ), + ( #6896, #291 ), + ( #8040, #1379 ), + ( #9175, #2468 ), + ( #10291, #3588 ), + ( #11426, #4692 ), + ( #12534, #5822 ), + ( #13628, #6944 ), + ( #337, #8090 ), + ( #1423, #9222 ), + ( #2521, #10335 ), + ( #3628, #11477 ), + ( #4739, #12577 ), + ( #5868, #13683 ), + ( #6992, #384 ), + ( #8144, #1477 ), + ( #9271, #2571 ), + ( #10388, #3678 ), + ( #11525, #5547 ), + ( #4632, #12464 ), + ( #5750, #13561 ) ), + .UNSPECIFIED., .F., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 1, 2, 2, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 0.1250000000000001900, 0.1875000000000004400, 0.2500000000000006700, 0.3750000000000009400, 0.4375000000000008900, 0.5000000000000008900, 0.6250000000000007800, 0.6875000000000006700, 0.7500000000000004400, 0.8125000000000003300, 0.8750000000000002200, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#12868 = CARTESIAN_POINT ( 'NONE', ( 30.96884228766505500, -30.80274329480623400, 27.13109454015148400 ) ) ; +#12869 = CARTESIAN_POINT ( 'NONE', ( 10.69157645482764200, -27.22497475875634300, 20.35729831299946500 ) ) ; +#12870 = CARTESIAN_POINT ( 'NONE', ( 8.085147491331646600, -31.08081476525466900, 26.53739979801262500 ) ) ; +#12871 = CARTESIAN_POINT ( 'NONE', ( 37.24383023138535300, -30.03468998416772400, 22.11271042030199400 ) ) ; +#12872 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3397, #11238, #12344, #5625 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 6.135433674210156500E-005 ), + .UNSPECIFIED. ) ; +#12873 = EDGE_CURVE ( 'NONE', #10148, #12521, #12554, .T. ) ; +#12874 = CARTESIAN_POINT ( 'NONE', ( 4.745665092167075500, -29.17851063986186200, 23.94863263689956800 ) ) ; +#12875 = CARTESIAN_POINT ( 'NONE', ( 13.01682020731790200, -31.87373873857725600, 20.46251347879711000 ) ) ; +#12876 = CARTESIAN_POINT ( 'NONE', ( 36.82760378537025800, -95.07596123493895800, -0.5259895963437620800 ) ) ; +#12877 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -90.07596123493894400, 15.95758058754439400 ) ) ; +#12878 = CARTESIAN_POINT ( 'NONE', ( 31.94337236086744600, -22.03500000000001400, 15.99830612354612200 ) ) ; +#12879 = CARTESIAN_POINT ( 'NONE', ( 29.24854989907730700, -30.72490432346564400, 27.79641735951707600 ) ) ; +#12880 = CARTESIAN_POINT ( 'NONE', ( 28.80369952359694000, -97.40649683660852500, 21.35339311544487000 ) ) ; +#12881 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 12.00000000000000000, 25.00000000000000400 ) ) ; +#12882 = ADVANCED_FACE ( 'NONE', ( #10290 ), #10883, .T. ) ; +#12883 = CARTESIAN_POINT ( 'NONE', ( 26.70720308668627000, -11.68860824032027800, 24.70225280738490200 ) ) ; +#12884 = ORIENTED_EDGE ( 'NONE', *, *, #5512, .F. ) ; +#12885 = CARTESIAN_POINT ( 'NONE', ( 34.42443034463035900, -23.01968027523411900, 11.29191018417775400 ) ) ; +#12886 = CARTESIAN_POINT ( 'NONE', ( 32.96821288260699100, -30.93425039263720700, 25.99006026751856200 ) ) ; +#12887 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995100, -27.07571732632036500, 6.665795566818515800 ) ) ; +#12888 = CARTESIAN_POINT ( 'NONE', ( 28.79040513301439200, -10.26413982838854400, -25.03312147988668800 ) ) ; +#12889 = CARTESIAN_POINT ( 'NONE', ( 15.81343970513446400, -20.77928685283112700, -24.28618390825624500 ) ) ; +#12890 = VECTOR ( 'NONE', #12560, 1000.000000000000000 ) ; +#12891 = CARTESIAN_POINT ( 'NONE', ( 16.06250472580907000, -18.96892614899190800, 23.40013997253924000 ) ) ; +#12892 = CARTESIAN_POINT ( 'NONE', ( 36.06120719502886400, -28.98781365772492400, 22.77267620492863600 ) ) ; +#12893 = CARTESIAN_POINT ( 'NONE', ( 5.870727640239559600, -100.0000000000000000, 19.03105684729482400 ) ) ; +#12894 = CYLINDRICAL_SURFACE ( 'NONE', #7903, 3.189999999999995100 ) ; +#12895 = CARTESIAN_POINT ( 'NONE', ( 26.25426258938587100, -19.71292641769208100, 22.81127934390740500 ) ) ; +#12896 = VERTEX_POINT ( 'NONE', #5874 ) ; +#12897 = CARTESIAN_POINT ( 'NONE', ( 2.586021373512669400, -10.00000000000000000, 20.65015935806839700 ) ) ; +#12898 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23258414808116600, -11.56337016819494100 ) ) ; +#12899 = CARTESIAN_POINT ( 'NONE', ( 9.832820081352267000, -30.75368554096012400, 27.47248348965306200 ) ) ; +#12900 = CARTESIAN_POINT ( 'NONE', ( 35.15165595418871200, -31.02845228949804100, 23.75141086538836200 ) ) ; +#12901 = CARTESIAN_POINT ( 'NONE', ( 15.66116077208650600, -12.50000000000001200, 9.312350279700444500 ) ) ; +#12902 = CARTESIAN_POINT ( 'NONE', ( 36.48810725790948300, -93.66222730503224600, 4.589318382292631800 ) ) ; +#12903 = CARTESIAN_POINT ( 'NONE', ( 2.207012960729590700, -18.81673578416462800, 8.245767609603882800 ) ) ; +#12904 = CARTESIAN_POINT ( 'NONE', ( 2.197721142024847000, -18.79558710678643900, 7.812877927395876800 ) ) ; +#12905 = CARTESIAN_POINT ( 'NONE', ( 28.64051496308381300, -28.14421086525363700, 26.49738708827863600 ) ) ; +#12906 = CARTESIAN_POINT ( 'NONE', ( 6.390877186900954000, -30.86572436911659200, 25.58407410043532000 ) ) ; +#12907 = CARTESIAN_POINT ( 'NONE', ( 37.70028341263974200, -18.75819226202439800, -13.76201242590820200 ) ) ; +#12908 = CARTESIAN_POINT ( 'NONE', ( 41.80193153020165700, -10.00000000000000500, 10.48614551672336700 ) ) ; +#12909 = CARTESIAN_POINT ( 'NONE', ( 16.62448173061771300, -12.50000000000000000, 9.978418575285994400 ) ) ; +#12910 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#12911 = VERTEX_POINT ( 'NONE', #4748 ) ; +#12912 = CARTESIAN_POINT ( 'NONE', ( -0.6732566735151341900, -10.00000000000000500, 15.09754401314991200 ) ) ; +#12913 = CARTESIAN_POINT ( 'NONE', ( 30.75625670658354900, -30.37580941718482900, 27.26098530155032100 ) ) ; +#12914 = CARTESIAN_POINT ( 'NONE', ( 8.279068655074032900, -20.59987137933319800, 19.91522292891930900 ) ) ; +#12915 = CARTESIAN_POINT ( 'NONE', ( 8.043404097042580900, -30.52215937536138000, 26.71839569390621700 ) ) ; +#12916 = CARTESIAN_POINT ( 'NONE', ( 36.14631957755713600, -28.96884123673418200, 22.62256164663986300 ) ) ; +#12917 = EDGE_CURVE ( 'NONE', #2701, #13026, #1886, .T. ) ; +#12918 = CARTESIAN_POINT ( 'NONE', ( 2.500000000004238800, -95.28490972492568300, 8.995309444719959300 ) ) ; +#12919 = CARTESIAN_POINT ( 'NONE', ( 4.404017730651928800, -30.39334423323654400, 24.21738074939520400 ) ) ; +#12920 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3493, #10212, #4610, #12440, #5726, #13541, #6853, #244, #7996, #1335, #9131, #2424, #10256, #3539, #11382, #4650, #12490, #5775, #13584, #6899, #293, #8044, #1382, #9179, #2472, #10293, #3590, #11429, #4695, #12536, #5825, #13633, #6947, #340, #8094, #1427, #9224, #2523, #10339, #3631, #11480, #4744, #12581, #5871, #13686, #6996, #386, #8149, #1481, #9274, #2574, #10391 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.01578425090104713200, 0.03156850180209426500, 0.06313700360418853000, 0.1262740072083770600, 0.1894110108125655900, 0.2209795126146598700, 0.2525480144167541200, 0.2602759702572779400, 0.3143716611409447800, 0.3761953078651354400, 0.4380189545893261000, 0.4689307779514214600, 0.4998426013135167700, 0.5311368631043980000, 0.5624311248952791300, 0.6250196484770416100, 0.6876081720588040900, 0.7189024338496852200, 0.7501966956405664600, 0.7814221086854955500, 0.8126475217304247600, 0.8750983478202831700, 0.9375491739101415900, 0.9687745869550707900, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#12921 = CARTESIAN_POINT ( 'NONE', ( 8.051641359665778100, -32.35799559909990800, 26.08288648906925600 ) ) ; +#12922 = CARTESIAN_POINT ( 'NONE', ( 34.47706053404760200, -89.55013418175552400, 4.966258557459065400 ) ) ; +#12923 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000900, 17.50000000000000400 ) ) ; +#12924 = ORIENTED_EDGE ( 'NONE', *, *, #3392, .T. ) ; +#12925 = CARTESIAN_POINT ( 'NONE', ( 28.07931111076170400, -100.0000000000000100, 5.299666842386454100 ) ) ; +#12926 = CARTESIAN_POINT ( 'NONE', ( 29.24729195466270700, -30.80274670503801800, 27.78481733053474300 ) ) ; +#12927 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -6.938893903907222500E-016 ) ) ; +#12928 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669238900 ) ) ; +#12929 = CARTESIAN_POINT ( 'NONE', ( 3.014027001502731700, -30.30646022589725100, 21.50395274837005400 ) ) ; +#12930 = CARTESIAN_POINT ( 'NONE', ( 37.83761704303631700, -11.92449423487140700, -19.04423337842783300 ) ) ; +#12931 = ORIENTED_EDGE ( 'NONE', *, *, #9505, .T. ) ; +#12932 = CARTESIAN_POINT ( 'NONE', ( 35.03792440448164300, -12.50000000000208700, 10.82648902770776000 ) ) ; +#12933 = CARTESIAN_POINT ( 'NONE', ( 32.66531272311282000, -29.98263622230923200, 26.29009906860110800 ) ) ; +#12934 = CARTESIAN_POINT ( 'NONE', ( 29.62685590425460400, -10.57577327419798500, -24.99999999999939200 ) ) ; +#12935 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#12936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#12937 = CARTESIAN_POINT ( 'NONE', ( 14.57155566970190600, -12.49999999999985600, -22.59895148062813800 ) ) ; +#12938 = ORIENTED_EDGE ( 'NONE', *, *, #6635, .F. ) ; +#12939 = EDGE_CURVE ( 'NONE', #13026, #3667, #4447, .T. ) ; +#12940 = PLANE ( 'NONE', #10167 ) ; +#12941 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#12942 = CARTESIAN_POINT ( 'NONE', ( 24.78113402122961200, -19.43886437375563100, 23.17819633408489500 ) ) ; +#12943 = ORIENTED_EDGE ( 'NONE', *, *, #9505, .F. ) ; +#12944 = CARTESIAN_POINT ( 'NONE', ( 14.32894433953266100, -12.49999999999970700, 21.65395081717093400 ) ) ; +#12945 = CARTESIAN_POINT ( 'NONE', ( 9.838180812430222100, -30.52242963867657400, 27.49684220671619900 ) ) ; +#12946 = CARTESIAN_POINT ( 'NONE', ( 35.38030452084304800, -29.87634147000558100, 24.46331064333101700 ) ) ; +#12947 = CARTESIAN_POINT ( 'NONE', ( 8.826965809549713900, -23.74869660715101500, 16.51302206220528700 ) ) ; +#12948 = AXIS2_PLACEMENT_3D ( 'NONE', #1083, #9950, #12231 ) ; +#12949 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -90.07596123493894400, -4.350951650170395100 ) ) ; +#12950 = CARTESIAN_POINT ( 'NONE', ( 5.086982520939710800, -19.02636187119861700, 16.94140287640092200 ) ) ; +#12951 = ADVANCED_FACE ( 'NONE', ( #9958 ), #4658, .F. ) ; +#12952 = ORIENTED_EDGE ( 'NONE', *, *, #5340, .F. ) ; +#12953 = CARTESIAN_POINT ( 'NONE', ( 2.397610542762349100, -19.58747918010794800, 7.912295042604895000 ) ) ; +#12954 = CARTESIAN_POINT ( 'NONE', ( 39.48952109067701600, -11.89204932930078600, 9.154297389909526600 ) ) ; +#12955 = CARTESIAN_POINT ( 'NONE', ( 6.390868168143130700, -29.98474242900452300, 25.73942504174246100 ) ) ; +#12956 = CARTESIAN_POINT ( 'NONE', ( 38.40507542997270500, -11.88572407981039600, 14.23480173802086700 ) ) ; +#12957 = CARTESIAN_POINT ( 'NONE', ( 16.27922671973881600, -18.76470909553726300, 23.45454530839596100 ) ) ; +#12958 = CARTESIAN_POINT ( 'NONE', ( 13.86287535453209200, -24.16092653827071500, 19.45219017863219000 ) ) ; +#12959 = CARTESIAN_POINT ( 'NONE', ( 33.97866117030721300, -12.33110931685276100, -23.38565533583885900 ) ) ; +#12960 = EDGE_LOOP ( 'NONE', ( #2465, #972, #10294, #2099, #12952 ) ) ; +#12961 = EDGE_CURVE ( 'NONE', #9403, #4778, #2931, .T. ) ; +#12962 = CARTESIAN_POINT ( 'NONE', ( 3.357247342860036500, -20.13990634067613400, -16.66149316929259400 ) ) ; +#12963 = CARTESIAN_POINT ( 'NONE', ( 3.999952370576393500, -10.00000000000092700, 19.35358387235008200 ) ) ; +#12964 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#12965 = CARTESIAN_POINT ( 'NONE', ( 30.77169149714914200, -30.71649153478145100, 27.23694130448854300 ) ) ; +#12966 = CARTESIAN_POINT ( 'NONE', ( 3.286855322348972900, -28.85456704782214400, 21.04585812794361700 ) ) ; +#12967 = CARTESIAN_POINT ( 'NONE', ( 8.374366267148721100, -31.09490434094777100, 26.68568623277072400 ) ) ; +#12968 = CARTESIAN_POINT ( 'NONE', ( 37.08361087370070000, -29.74295676012463100, 22.48666849497764600 ) ) ; +#12969 = EDGE_LOOP ( 'NONE', ( #998, #1776, #12141, #829 ) ) ; +#12970 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #53, #6647, #8927, #2228 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.01164105656950173600, 0.01181063369186125700 ), + .UNSPECIFIED. ) ; +#12971 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -96.37138356748538100, 5.695220015075882700 ) ) ; +#12972 = CARTESIAN_POINT ( 'NONE', ( 4.721935699679050900, -29.34633181028068100, 24.12275685424475900 ) ) ; +#12973 = CARTESIAN_POINT ( 'NONE', ( 7.219545823679865700, -37.14213175124054800, 16.08620130053900300 ) ) ; +#12974 = CARTESIAN_POINT ( 'NONE', ( 31.41260502183480000, -95.07596123493894400, 13.87870138358447000 ) ) ; +#12975 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.118488116581939800, 12.94760415316146600 ) ) ; +#12976 = ORIENTED_EDGE ( 'NONE', *, *, #6223, .F. ) ; +#12977 = CIRCLE ( 'NONE', #294, 2.499999999999998200 ) ; +#12978 = CARTESIAN_POINT ( 'NONE', ( 29.24855280244877400, -30.87380652327361100, 27.77015560745811100 ) ) ; +#12979 = CARTESIAN_POINT ( 'NONE', ( 28.47252574471798400, -99.99999999999998600, 20.97559654706093500 ) ) ; +#12980 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#12981 = CARTESIAN_POINT ( 'NONE', ( 39.57936748579997000, -11.68253005680008100, 8.578512152692107800 ) ) ; +#12982 = CARTESIAN_POINT ( 'NONE', ( 36.24251142581432100, -30.70477496036945200, 22.09966525862117200 ) ) ; +#12983 = CARTESIAN_POINT ( 'NONE', ( 3.014026222764584900, -29.11476104942522300, 21.71408100090717500 ) ) ; +#12984 = CARTESIAN_POINT ( 'NONE', ( 5.781484463966917200, -100.0000000000000300, -30.08826940046393300 ) ) ; +#12985 = CARTESIAN_POINT ( 'NONE', ( 24.94918478368135300, -12.50000000000001200, 8.081777239975437500 ) ) ; +#12986 = ORIENTED_EDGE ( 'NONE', *, *, #10629, .T. ) ; +#12987 = EDGE_CURVE ( 'NONE', #4276, #8443, #10749, .T. ) ; +#12988 = CARTESIAN_POINT ( 'NONE', ( 32.73156728438849000, -30.67026032108981300, 26.27910451276767400 ) ) ; +#12989 = CARTESIAN_POINT ( 'NONE', ( 2.512633587278417600, -20.02952873697429200, -12.74581463994469200 ) ) ; +#12990 = CARTESIAN_POINT ( 'NONE', ( 30.37931908984395000, -11.24910223148629700, -24.99999999999999600 ) ) ; +#12991 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#12992 = CARTESIAN_POINT ( 'NONE', ( 16.60753617178740200, -12.50000000000000500, -14.38006552894160000 ) ) ; +#12993 = FACE_OUTER_BOUND ( 'NONE', #11726, .T. ) ; +#12994 = ORIENTED_EDGE ( 'NONE', *, *, #11959, .T. ) ; +#12995 = CIRCLE ( 'NONE', #11969, 2.500000000000000000 ) ; +#12996 = CARTESIAN_POINT ( 'NONE', ( 11.88076939103268800, -9.664038489777668800, 25.00000000000000400 ) ) ; +#12997 = CARTESIAN_POINT ( 'NONE', ( 6.945949027982826400, -10.54196388620232800, -25.00000000000000400 ) ) ; +#12998 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#12999 = CARTESIAN_POINT ( 'NONE', ( 23.27687051360744500, -19.18514204469856200, 23.39961651778054000 ) ) ; +#13000 = CARTESIAN_POINT ( 'NONE', ( 17.10487190834243900, -12.50000000000000500, 10.10938878020684600 ) ) ; +#13001 = ORIENTED_EDGE ( 'NONE', *, *, #13768, .F. ) ; +#13002 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -94.39237608318525500, 1.716882203698021600 ) ) ; +#13003 = CARTESIAN_POINT ( 'NONE', ( 0.02832571919072532700, 9.894175532731914300, -18.88869844314349300 ) ) ; +#13004 = CARTESIAN_POINT ( 'NONE', ( 10.24002000289455200, -30.81923962049914700, 27.60878143313004400 ) ) ; +#13005 = CARTESIAN_POINT ( 'NONE', ( 35.15622399133952300, -30.88832262968863100, 24.07646484984362100 ) ) ; +#13006 = CARTESIAN_POINT ( 'NONE', ( 8.486981784782443600, -12.49999999999990100, 18.24615995038845300 ) ) ; +#13007 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13008 = CARTESIAN_POINT ( 'NONE', ( 15.38022964209077200, -19.18726538294824700, 23.26705327076487300 ) ) ; +#13009 = FACE_OUTER_BOUND ( 'NONE', #2538, .T. ) ; +#13010 = ORIENTED_EDGE ( 'NONE', *, *, #4903, .T. ) ; +#13011 = CARTESIAN_POINT ( 'NONE', ( 2.499429228669633600, -20.40278739748428200, 7.946069924268726000 ) ) ; +#13012 = CARTESIAN_POINT ( 'NONE', ( 33.74779991721609200, -11.87946943135724700, 21.01202081044020500 ) ) ; +#13013 = CARTESIAN_POINT ( 'NONE', ( 6.561323765876788400, -31.12000117743052400, 25.48310145280379400 ) ) ; +#13014 = CARTESIAN_POINT ( 'NONE', ( 4.438088995783442000, -7.503635065060565000, 25.00000000000000000 ) ) ; +#13015 = CARTESIAN_POINT ( 'NONE', ( 36.00001372347231400, -10.00000000000092700, 19.35362564347098800 ) ) ; +#13016 = CARTESIAN_POINT ( 'NONE', ( 17.34540314961826400, -21.17801275585939200, 30.64417503465986000 ) ) ; +#13017 = CARTESIAN_POINT ( 'NONE', ( 39.88358878717394900, -10.46564485130423200, 11.17252535062687200 ) ) ; +#13018 = ORIENTED_EDGE ( 'NONE', *, *, #12384, .T. ) ; +#13019 = CARTESIAN_POINT ( 'NONE', ( 5.083617514991639800, -18.58914319150982300, -20.84589399494969100 ) ) ; +#13020 = CARTESIAN_POINT ( 'NONE', ( 7.010345164616719400, -11.87904182768177600, 21.62674589977146100 ) ) ; +#13021 = CARTESIAN_POINT ( 'NONE', ( 26.84752224756304900, -28.08124121815344800, 26.96588792518211300 ) ) ; +#13022 = CARTESIAN_POINT ( 'NONE', ( 30.75621426903687400, -31.01907744124148900, 27.14746365042084300 ) ) ; +#13023 = CARTESIAN_POINT ( 'NONE', ( 5.288931563539651200, -26.17332215604457300, 15.91028189654165800 ) ) ; +#13024 = CARTESIAN_POINT ( 'NONE', ( 8.337115935471766500, -30.67337147967816700, 26.83829739061204500 ) ) ; +#13025 = CARTESIAN_POINT ( 'NONE', ( 36.17498888443744700, -30.74090324417225200, 22.30937702789184800 ) ) ; +#13026 = VERTEX_POINT ( 'NONE', #5878 ) ; +#13027 = AXIS2_PLACEMENT_3D ( 'NONE', #12191, #5460, #13297 ) ; +#13028 = CARTESIAN_POINT ( 'NONE', ( 2.902962182418996800, -92.41467508776249000, 1.255243565481146900 ) ) ; +#13029 = CARTESIAN_POINT ( 'NONE', ( 4.619846579932680400, -30.77105219545041600, 23.99870918491647100 ) ) ; +#13030 = CARTESIAN_POINT ( 'NONE', ( 6.180691020937566700, -31.27097820553984400, 16.14989117472431300 ) ) ; +#13031 = CARTESIAN_POINT ( 'NONE', ( 23.41844926777372000, -95.07596123493893000, 9.998812624608781600 ) ) ; +#13032 = CARTESIAN_POINT ( 'NONE', ( 2.144980470191590000, -10.02451344857325200, 19.37223887610780100 ) ) ; +#13033 = ORIENTED_EDGE ( 'NONE', *, *, #3136, .T. ) ; +#13034 = CARTESIAN_POINT ( 'NONE', ( 11.46496897867724700, -9.794649201554937800, -24.99999999999999300 ) ) ; +#13035 = CARTESIAN_POINT ( 'NONE', ( 29.14470337788941000, -30.79308354380594200, 27.81922736926527100 ) ) ; +#13036 = CARTESIAN_POINT ( 'NONE', ( 37.48736648568989700, -20.02952857085355400, -12.74580876161506600 ) ) ; +#13037 = CARTESIAN_POINT ( 'NONE', ( 27.04941352502759600, -30.77347774677197400, 28.36758194924810900 ) ) ; +#13038 = ADVANCED_FACE ( 'NONE', ( #12216 ), #6588, .T. ) ; +#13039 = CARTESIAN_POINT ( 'NONE', ( 39.52658467759808800, -11.89366128960763400, 8.005331014629280900 ) ) ; +#13040 = CARTESIAN_POINT ( 'NONE', ( 35.55794955950032200, -30.94558463976724000, 23.22996872371847800 ) ) ; +#13041 = EDGE_CURVE ( 'NONE', #9541, #2004, #383, .T. ) ; +#13042 = CARTESIAN_POINT ( 'NONE', ( 3.475500942210310900, -30.53298977460238800, 21.53184212120387600 ) ) ; +#13043 = CARTESIAN_POINT ( 'NONE', ( 9.191493342695373800, -20.28809933266904900, -21.13074587044895500 ) ) ; +#13044 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -22.50000000000000700, 7.564513562858100400 ) ) ; +#13045 = CARTESIAN_POINT ( 'NONE', ( 32.45956165559041300, -29.91798763233772000, 26.38028316558108000 ) ) ; +#13046 = CARTESIAN_POINT ( 'NONE', ( 7.758083223307187900, -9.668434184806196500, 25.00000000000000400 ) ) ; +#13047 = CARTESIAN_POINT ( 'NONE', ( 11.94127090969430500, -20.94556043688414000, -23.10230249166118100 ) ) ; +#13048 = CARTESIAN_POINT ( 'NONE', ( -1.900969918041651100, -95.07596123493894400, 0.7602325291602418700 ) ) ; +#13049 = VERTEX_POINT ( 'NONE', #2726 ) ; +#13050 = CARTESIAN_POINT ( 'NONE', ( 14.11468084184376800, -14.24115460679471000, 24.25217001346612000 ) ) ; +#13051 = CARTESIAN_POINT ( 'NONE', ( 12.28384262019703500, -95.07596123493894400, 15.30026349260080900 ) ) ; +#13052 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 12.00000000000000000, -22.49999999999999600 ) ) ; +#13053 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -24.23648177666924800, 19.98972415240892200 ) ) ; +#13054 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.500000000000000000, -19.99999999999999600 ) ) ; +#13055 = CARTESIAN_POINT ( 'NONE', ( 6.174400445945199300, -18.00600316275186000, -22.42452431104957000 ) ) ; +#13056 = CARTESIAN_POINT ( 'NONE', ( 10.24042495420474100, -30.65090253374891200, 27.63455391542084900 ) ) ; +#13057 = CARTESIAN_POINT ( 'NONE', ( 35.02344571211366300, -29.47935842057791700, 24.46689926025535300 ) ) ; +#13058 = CARTESIAN_POINT ( 'NONE', ( 15.96173509700761900, -12.49999999999999800, 9.595942575228871600 ) ) ; +#13059 = CARTESIAN_POINT ( 'NONE', ( 14.57934984244423000, -28.05956875461839300, 27.34257568896931900 ) ) ; +#13060 = EDGE_CURVE ( 'NONE', #6606, #13531, #723, .T. ) ; +#13061 = CARTESIAN_POINT ( 'NONE', ( 17.39810910931735300, -20.76351821466811400, -24.39789866859293000 ) ) ; +#13062 = ORIENTED_EDGE ( 'NONE', *, *, #3050, .F. ) ; +#13063 = CARTESIAN_POINT ( 'NONE', ( 2.500833145983063100, -21.21781140357374100, 7.951179221567955800 ) ) ; +#13064 = CARTESIAN_POINT ( 'NONE', ( 4.849604375360051700, -10.01030339717064200, 22.66968200243134700 ) ) ; +#13065 = CARTESIAN_POINT ( 'NONE', ( 6.427757156247889900, -30.31999141331669300, 25.81912077790701700 ) ) ; +#13066 = CARTESIAN_POINT ( 'NONE', ( 17.68719383516401000, -30.22505362207422800, 26.39521083043856800 ) ) ; +#13067 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #603, #7230, #1702, #9504, #2799, #10638, #3917, #11752 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0002678568748077615700, 0.001306314912436596200, 0.001825543931251010800, 0.002344772950065425800 ), + .UNSPECIFIED. ) ; +#13068 = CARTESIAN_POINT ( 'NONE', ( 34.49612310594931600, -10.00000000000000700, 23.52391504165164800 ) ) ; +#13069 = CARTESIAN_POINT ( 'NONE', ( 23.82871055804817200, -33.40998945197929300, 28.48788683010504000 ) ) ; +#13070 = CARTESIAN_POINT ( 'NONE', ( 12.45252773853832600, -10.00000000000000000, 25.00000000000000000 ) ) ; +#13071 = AXIS2_PLACEMENT_3D ( 'NONE', #8737, #3154, #9863 ) ; +#13072 = CARTESIAN_POINT ( 'NONE', ( 8.373720224972988300, -22.21739553587567400, -24.05267281473972200 ) ) ; +#13073 = CARTESIAN_POINT ( 'NONE', ( 10.99907737555389700, -10.00000000000000400, 26.61020571855116400 ) ) ; +#13074 = CARTESIAN_POINT ( 'NONE', ( 30.67088904693955000, -30.64916945019699300, 27.28912773855993000 ) ) ; +#13075 = CARTESIAN_POINT ( 'NONE', ( 2.976407205389854900, -24.45287427875078400, 11.11235418672273300 ) ) ; +#13076 = CARTESIAN_POINT ( 'NONE', ( 8.372567828265584200, -30.15919865986480300, 26.85446282538183000 ) ) ; +#13077 = CARTESIAN_POINT ( 'NONE', ( 36.66398829528117200, -29.41577328323493400, 22.76182111185345000 ) ) ; +#13078 = CIRCLE ( 'NONE', #1118, 1.200000000000012600 ) ; +#13079 = SHAPE_DEFINITION_REPRESENTATION ( #9891, #5251 ) ; +#13080 = EDGE_LOOP ( 'NONE', ( #9832, #5320, #12432, #11541 ) ) ; +#13081 = EDGE_CURVE ( 'NONE', #2282, #90, #2479, .T. ) ; +#13082 = CARTESIAN_POINT ( 'NONE', ( 4.495759235823639300, -29.76440361623432900, 24.28590747304511800 ) ) ; +#13083 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.500000000000000000, -19.99999999999999300 ) ) ; +#13084 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669239500, -0.9848077530122092400 ) ) ; +#13085 = CARTESIAN_POINT ( 'NONE', ( 29.14558285567691000, -30.85526365302576600, 27.80730988605128900 ) ) ; +#13086 = CARTESIAN_POINT ( 'NONE', ( 36.71321228767944000, -21.63386470795163800, -16.71371413689691500 ) ) ; +#13087 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999995100, -30.99851639274612600, 28.91309459425310600 ) ) ; +#13088 = CARTESIAN_POINT ( 'NONE', ( 7.772109745456421400, -97.40634803306923600, 20.31095579530005300 ) ) ; +#13089 = CARTESIAN_POINT ( 'NONE', ( 34.53372932262458100, -31.11409157988031600, 24.42776640927878900 ) ) ; +#13090 = CARTESIAN_POINT ( 'NONE', ( 2.567435703725359900, -29.49999703503209100, 21.71459524039621800 ) ) ; +#13091 = CIRCLE ( 'NONE', #5397, 3.189999999999994200 ) ; +#13092 = CARTESIAN_POINT ( 'NONE', ( 13.42391054053097400, -100.0000000000000300, -37.70236617686631300 ) ) ; +#13093 = CARTESIAN_POINT ( 'NONE', ( 22.31280744310812000, -31.29913968154958300, 28.74438700826458900 ) ) ; +#13094 = CARTESIAN_POINT ( 'NONE', ( 32.54370505408601100, -30.53184038342200100, 26.41737744280377600 ) ) ; +#13095 = FACE_OUTER_BOUND ( 'NONE', #1021, .T. ) ; +#13096 = ORIENTED_EDGE ( 'NONE', *, *, #11049, .T. ) ; +#13097 = CARTESIAN_POINT ( 'NONE', ( 11.92071611148591800, -9.685657917475293000, 25.00000000000000000 ) ) ; +#13098 = CARTESIAN_POINT ( 'NONE', ( 0.1236687647431131700, -10.49467505897239100, 11.14960158511206800 ) ) ; +#13099 = CARTESIAN_POINT ( 'NONE', ( 12.22525509787455400, -12.50000000000007600, -21.77453086750814700 ) ) ; +#13100 = CARTESIAN_POINT ( 'NONE', ( 17.65009222793004200, -33.18274856558008400, 28.41225594090786500 ) ) ; +#13101 = CARTESIAN_POINT ( 'NONE', ( 8.797680468486296600, -95.07596123493894400, 7.225344253356562200 ) ) ; +#13102 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2970, #1871, #13034, #6322, #14133, #7461, #823, #8607, #1917, #9734, #3022, #10869 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004405616523658844200, 0.0008811233047317688300, 0.001762246609463535700, 0.002643369914195302800, 0.003524493218927069300 ), + .UNSPECIFIED. ) ; +#13103 = CARTESIAN_POINT ( 'NONE', ( 16.43880839120342000, -94.74682992104543200, 18.71443454281854100 ) ) ; +#13104 = CARTESIAN_POINT ( 'NONE', ( 23.29918441985204300, -19.42405827726146900, 23.33257843761425200 ) ) ; +#13105 = CARTESIAN_POINT ( 'NONE', ( 8.713203435596405200, -89.20772034660433300, 11.03354182248334700 ) ) ; +#13106 = CARTESIAN_POINT ( 'NONE', ( 6.168292410712044900, -12.75215291211117300, -25.48527881345379600 ) ) ; +#13107 = CARTESIAN_POINT ( 'NONE', ( 10.44443263756949000, -30.87591158428058000, 27.66768826863097500 ) ) ; +#13108 = CARTESIAN_POINT ( 'NONE', ( 35.23466951075588600, -30.54957625192517800, 24.48279306278659100 ) ) ; +#13109 = ORIENTED_EDGE ( 'NONE', *, *, #4845, .F. ) ; +#13110 = CARTESIAN_POINT ( 'NONE', ( 22.93537384328534400, -19.66093466443465600, 23.29585635213082600 ) ) ; +#13111 = CARTESIAN_POINT ( 'NONE', ( 15.86367451466730900, -20.77763829571294400, -24.29784296936138700 ) ) ; +#13112 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -90.07596123493897300, -4.350951650170485700 ) ) ; +#13113 = ADVANCED_FACE ( 'NONE', ( #3980 ), #7685, .T. ) ; +#13114 = CARTESIAN_POINT ( 'NONE', ( 2.198927990701938100, -18.79548579136592000, 8.016308952227928900 ) ) ; +#13115 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23263195269504400, -11.60422004054821300 ) ) ; +#13116 = CARTESIAN_POINT ( 'NONE', ( 6.750331888870154500, -31.16977810122536100, 25.58123420983756400 ) ) ; +#13117 = CARTESIAN_POINT ( 'NONE', ( 14.29330420527166900, -15.78701164063907700, -26.02040628991858600 ) ) ; +#13118 = ORIENTED_EDGE ( 'NONE', *, *, #9617, .T. ) ; +#13119 = CARTESIAN_POINT ( 'NONE', ( 28.18129031064088600, -11.87736136252349400, 24.32798227907844100 ) ) ; +#13120 = AXIS2_PLACEMENT_3D ( 'NONE', #2087, #9912, #3199 ) ; +#13121 = CARTESIAN_POINT ( 'NONE', ( 26.75719765212340200, -31.89480662234923600, 20.52754327233029100 ) ) ; +#13122 = CARTESIAN_POINT ( 'NONE', ( 3.748412170641485500, -28.94192490633074400, 22.38979086418611800 ) ) ; +#13123 = CARTESIAN_POINT ( 'NONE', ( 11.91883819619316200, -99.99999999999995700, 5.321834943021110000 ) ) ; +#13124 = CARTESIAN_POINT ( 'NONE', ( 11.48702683111980100, -20.39644789147552100, -25.56509199269039800 ) ) ; +#13125 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #5830, #13639, #6953 ), + ( #345, #8100, #1433 ), + ( #9229, #2527, #10344 ), + ( #3636, #11486, #4750 ), + ( #12585, #5875, #13691 ), + ( #7002, #392, #8154 ), + ( #1487, #9278, #2577 ), + ( #10396, #3687, #11533 ), + ( #4798, #12631, #5924 ), + ( #13733, #7055, #435 ), + ( #8203, #1535, #9328 ), + ( #2621, #10447, #3736 ), + ( #11575, #4840, #12682 ), + ( #5974, #13779, #7098 ), + ( #485, #8249, #1575 ), + ( #9372, #2669, #10497 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -6.081723666340188600E-015, 0.0005114279760238465500, 0.001022855952053774800, 0.001534283928083703200, 0.002045711904113631600, 0.002557139880143560000, 0.003068567856173488400, 0.004091423808233345100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9961946980917333300, 1.000000000000000000), + ( 1.000000000000000000, 0.9963938160314211900, 1.000000000000000000), + ( 1.000000000000000000, 0.9965341554606307300, 1.000000000000000000), + ( 1.000000000000000000, 0.9966823514121211400, 1.000000000000000000), + ( 1.000000000000000000, 0.9966877684518211700, 1.000000000000000000), + ( 1.000000000000000000, 0.9965631945341819600, 1.000000000000000000), + ( 1.000000000000000000, 0.9964340613743747400, 1.000000000000000000), + ( 1.000000000000000000, 0.9960662700568181400, 1.000000000000000000), + ( 1.000000000000000000, 0.9958327715363524100, 1.000000000000000000), + ( 1.000000000000000000, 0.9952929148004039400, 1.000000000000000000), + ( 1.000000000000000000, 0.9949839677403107300, 1.000000000000000000), + ( 1.000000000000000000, 0.9943226693139153300, 1.000000000000000000), + ( 1.000000000000000000, 0.9939710235309779900, 1.000000000000000000), + ( 1.000000000000000000, 0.9928712265999176700, 1.000000000000000000), + ( 1.000000000000000000, 0.9920780820134564900, 1.000000000000000000), + ( 1.000000000000000000, 0.9912542995308122300, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#13126 = CARTESIAN_POINT ( 'NONE', ( 2.565068657213494000, -96.92158979223404500, 12.92967155385060400 ) ) ; +#13127 = VERTEX_POINT ( 'NONE', #5036 ) ; +#13128 = CARTESIAN_POINT ( 'NONE', ( 30.66171613289025200, -30.96119176957140000, 27.21229430532721200 ) ) ; +#13129 = CARTESIAN_POINT ( 'NONE', ( 8.441434561165213100, -30.82652260620921300, 26.84623168303498600 ) ) ; +#13130 = CARTESIAN_POINT ( 'NONE', ( 36.41485577614147200, -30.58074861507564200, 22.54130591759441400 ) ) ; +#13131 = EDGE_CURVE ( 'NONE', #11029, #176, #1013, .T. ) ; +#13132 = VERTEX_POINT ( 'NONE', #11771 ) ; +#13133 = DIRECTION ( 'NONE', ( -0.9704428632608759200, -0.02183802303552120200, -0.2403409035015332000 ) ) ; +#13134 = CARTESIAN_POINT ( 'NONE', ( 4.969756169338668700, -31.03497510806541400, 23.93220475556599100 ) ) ; +#13135 = CARTESIAN_POINT ( 'NONE', ( 37.49999999998288300, -94.37761896481519800, 14.93692536370950400 ) ) ; +#13136 = CARTESIAN_POINT ( 'NONE', ( 34.61458298616040700, -18.57898002997363200, -21.25828496488454200 ) ) ; +#13137 = CARTESIAN_POINT ( 'NONE', ( 24.59931137039245600, -18.16061379634924200, 23.53037550148377500 ) ) ; +#13138 = CARTESIAN_POINT ( 'NONE', ( 23.55676063327363300, -31.26596940722210100, 28.73156040098827900 ) ) ; +#13139 = VERTEX_POINT ( 'NONE', #3977 ) ; +#13140 = CARTESIAN_POINT ( 'NONE', ( 33.43318976861738200, -31.16957921208038600, 25.43366521014651800 ) ) ; +#13141 = CARTESIAN_POINT ( 'NONE', ( 3.573349383861578900, -30.58061852312670900, 21.58594518625542200 ) ) ; +#13142 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -95.80543125211710300, 21.80032795718639300 ) ) ; +#13143 = CARTESIAN_POINT ( 'NONE', ( 32.45978849729210900, -31.14669497772876700, 26.16402796471925300 ) ) ; +#13144 = CARTESIAN_POINT ( 'NONE', ( 3.953400032461410300, -28.99244538715580400, 22.80674501681159300 ) ) ; +#13145 = VERTEX_POINT ( 'NONE', #11815 ) ; +#13146 = CARTESIAN_POINT ( 'NONE', ( 21.12500434736949700, -9.904327821957185300, 25.74506214676259200 ) ) ; +#13147 = CARTESIAN_POINT ( 'NONE', ( 0.003500146529498074700, -10.01400058611793900, 10.47829651733829900 ) ) ; +#13148 = CARTESIAN_POINT ( 'NONE', ( 16.27211798515168400, -12.50000000000002300, -14.21780880650526800 ) ) ; +#13149 = EDGE_CURVE ( 'NONE', #8443, #8198, #8318, .T. ) ; +#13150 = CARTESIAN_POINT ( 'NONE', ( 4.435228120172388900, -89.64557226224558000, 3.275176570732930800 ) ) ; +#13151 = ORIENTED_EDGE ( 'NONE', *, *, #5038, .F. ) ; +#13152 = CARTESIAN_POINT ( 'NONE', ( 9.618985425872358200, -93.15425519969630800, 21.68254789131920300 ) ) ; +#13153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13154 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999991100, -97.04517183358916600, 16.23828164244107300 ) ) ; +#13155 = CARTESIAN_POINT ( 'NONE', ( 10.85903565783482300, -7.741079707028967900, -24.60169140507934300 ) ) ; +#13156 = CARTESIAN_POINT ( 'NONE', ( 10.44475981626132800, -30.74306549218003300, 27.69356229770923200 ) ) ; +#13157 = CARTESIAN_POINT ( 'NONE', ( 34.61452383652756000, -29.33826675176267100, 24.66231324665655900 ) ) ; +#13158 = ORIENTED_EDGE ( 'NONE', *, *, #3249, .F. ) ; +#13159 = CARTESIAN_POINT ( 'NONE', ( 2.912596425632768300, -29.82727380188591900, 19.13662948343519000 ) ) ; +#13160 = CARTESIAN_POINT ( 'NONE', ( 7.562828679128466000, -21.44262565184399700, -19.55491955252469800 ) ) ; +#13161 = FACE_OUTER_BOUND ( 'NONE', #3775, .T. ) ; +#13162 = CARTESIAN_POINT ( 'NONE', ( 2.399760858479516900, -19.58430114696103200, 8.191765207961113400 ) ) ; +#13163 = CARTESIAN_POINT ( 'NONE', ( 39.82795725296643500, -9.999999999995838000, 21.30031871613416100 ) ) ; +#13164 = CARTESIAN_POINT ( 'NONE', ( 6.605777031402360500, -30.53374158321635400, 25.91014583017781100 ) ) ; +#13165 = CARTESIAN_POINT ( 'NONE', ( 13.10128487362113200, -19.17914538406847300, -26.61853099105531200 ) ) ; +#13166 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#13167 = ORIENTED_EDGE ( 'NONE', *, *, #6108, .F. ) ; +#13168 = CARTESIAN_POINT ( 'NONE', ( 28.99874697127186400, -38.65132533477937900, 18.45418769069333500 ) ) ; +#13169 = CARTESIAN_POINT ( 'NONE', ( 4.149547836783612300, -29.03663428877536400, 23.12989796453239700 ) ) ; +#13170 = CARTESIAN_POINT ( 'NONE', ( 5.415842926500907600, -99.99999999999995700, -2.818161743892662500 ) ) ; +#13171 = EDGE_CURVE ( 'NONE', #6593, #1982, #5787, .T. ) ; +#13172 = CARTESIAN_POINT ( 'NONE', ( 14.14197984495563900, -18.43869735383168900, -26.94148357011197000 ) ) ; +#13173 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13174 = ORIENTED_EDGE ( 'NONE', *, *, #4883, .T. ) ; +#13175 = CARTESIAN_POINT ( 'NONE', ( 30.36607889113010800, -30.56784238065585400, 27.41785336489798700 ) ) ; +#13176 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -100.0000000000000300, -38.36942826376122900 ) ) ; +#13177 = CARTESIAN_POINT ( 'NONE', ( 8.450371745342907900, -30.33862653607068400, 26.91308226544525100 ) ) ; +#13178 = CARTESIAN_POINT ( 'NONE', ( 35.97303968561271900, -29.14972242834939200, 23.18903996351364000 ) ) ; +#13179 = CARTESIAN_POINT ( 'NONE', ( 4.557145474109061600, -30.12578480268387400, 24.47585722584452800 ) ) ; +#13180 = CARTESIAN_POINT ( 'NONE', ( 34.99997003554203400, -95.07596123387051500, 12.92975751865532200 ) ) ; +#13181 = LINE ( 'NONE', #13927, #4071 ) ; +#13182 = CARTESIAN_POINT ( 'NONE', ( 31.48353360533724700, -20.34576499682978900, -23.83217751867654500 ) ) ; +#13183 = CARTESIAN_POINT ( 'NONE', ( 36.88139226322602600, -29.05972780217491500, 21.72417649530153800 ) ) ; +#13184 = ADVANCED_FACE ( 'NONE', ( #9245 ), #6087, .T. ) ; +#13185 = DIRECTION ( 'NONE', ( -0.9998119278664175900, 0.01909889591383957500, 0.003367650651352426700 ) ) ; +#13186 = ORIENTED_EDGE ( 'NONE', *, *, #9571, .T. ) ; +#13187 = CARTESIAN_POINT ( 'NONE', ( 31.88358422719392100, -31.11429557147157300, 26.53399871081409600 ) ) ; +#13188 = CARTESIAN_POINT ( 'NONE', ( 2.524244278828975400, -29.85061071399403000, 21.71617641329880800 ) ) ; +#13189 = CARTESIAN_POINT ( 'NONE', ( 12.12757216221482700, -10.98191071730690800, 24.82686264789260400 ) ) ; +#13190 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 5.018561128876294600, 20.00000000000000000 ) ) ; +#13191 = CARTESIAN_POINT ( 'NONE', ( 32.14664861143594300, -30.40916853802313800, 26.62908926643332200 ) ) ; +#13192 = EDGE_LOOP ( 'NONE', ( #13475, #2489, #6062, #3002 ) ) ; +#13193 = CARTESIAN_POINT ( 'NONE', ( 8.239515944439107300, -22.20895671987115300, -23.94547428881149600 ) ) ; +#13194 = CARTESIAN_POINT ( 'NONE', ( 10.60579712700458400, -21.05273516973624500, -22.33744717983606900 ) ) ; +#13195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13196 = CARTESIAN_POINT ( 'NONE', ( 20.83484214238000800, -19.84089650271978700, 23.26478443221099500 ) ) ; +#13197 = ORIENTED_EDGE ( 'NONE', *, *, #7447, .F. ) ; +#13198 = CARTESIAN_POINT ( 'NONE', ( 6.693606281623198500, -97.45967356877737600, 19.84958694665121800 ) ) ; +#13199 = CARTESIAN_POINT ( 'NONE', ( 38.25320801280862100, -11.87195532290481900, -18.16382525058827100 ) ) ; +#13200 = CARTESIAN_POINT ( 'NONE', ( 34.99999998962731200, -95.07596123493894400, 12.92969265702111400 ) ) ; +#13201 = CARTESIAN_POINT ( 'NONE', ( 29.76454014302661500, -10.86580850357042000, 24.22388462209066900 ) ) ; +#13202 = CARTESIAN_POINT ( 'NONE', ( 10.75130408843670400, -30.87365051176453100, 27.77010889483660000 ) ) ; +#13203 = CARTESIAN_POINT ( 'NONE', ( 34.96379118230057500, -30.32633220205190800, 24.85654312090321100 ) ) ; +#13204 = VERTEX_POINT ( 'NONE', #4189 ) ; +#13205 = CARTESIAN_POINT ( 'NONE', ( 17.68719255689186200, -31.29913968154958300, 28.74438700826458900 ) ) ; +#13206 = CARTESIAN_POINT ( 'NONE', ( 5.006293234306424400, -22.44338949399413300, -12.38131563271957200 ) ) ; +#13207 = CARTESIAN_POINT ( 'NONE', ( 22.35960558233108800, -33.35446909076586800, 26.50697697917620100 ) ) ; +#13208 = CARTESIAN_POINT ( 'NONE', ( 2.511812985084265600, -20.37461565281092000, 8.556502107480264700 ) ) ; +#13209 = CARTESIAN_POINT ( 'NONE', ( 15.39361848683393300, -94.74613901024021300, 18.64436139702412000 ) ) ; +#13210 = CARTESIAN_POINT ( 'NONE', ( 6.743467921093926300, -29.71988138661471300, 25.84718863125339900 ) ) ; +#13211 = CARTESIAN_POINT ( 'NONE', ( 13.95452509190098500, -21.30583273443195200, -26.63648997069285700 ) ) ; +#13212 = CARTESIAN_POINT ( 'NONE', ( 35.04373303782084300, -31.37695392414239500, 23.67498231718850800 ) ) ; +#13213 = CARTESIAN_POINT ( 'NONE', ( 5.247408467684358900, -29.29962014603782400, 24.52590663411291400 ) ) ; +#13214 = PLANE ( 'NONE', #360 ) ; +#13215 = CARTESIAN_POINT ( 'NONE', ( 37.60161482776215500, -19.59544895449772600, 7.729926490971119600 ) ) ; +#13216 = ORIENTED_EDGE ( 'NONE', *, *, #10138, .F. ) ; +#13217 = CARTESIAN_POINT ( 'NONE', ( 30.36819684410003700, -30.83143788443941000, 27.37704055968120900 ) ) ; +#13218 = CARTESIAN_POINT ( 'NONE', ( 26.94153720350374600, -100.0000000000000300, -37.54596735492513200 ) ) ; +#13219 = CARTESIAN_POINT ( 'NONE', ( 8.652910362442972000, -31.00724641668025000, 26.87559633096872200 ) ) ; +#13220 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #7075, #12653, #8226, #1554, #9350, #2642, #10473, #3760, #11600, #4863 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 4.906538933386797400E-018, 0.0001858201930515722100, 0.0003716403861031395400, 0.0007432807722062741000, 0.001486561544412544100 ), + .UNSPECIFIED. ) ; +#13221 = CARTESIAN_POINT ( 'NONE', ( 36.48854608754843600, -30.23942625114235800, 23.10532704832167600 ) ) ; +#13222 = AXIS2_PLACEMENT_3D ( 'NONE', #4275, #12103, #5374 ) ; +#13223 = CARTESIAN_POINT ( 'NONE', ( 4.987519915901613000, -29.23578779247104700, 24.23280734347601100 ) ) ; +#13224 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -10.00000000000000000, -24.99999999999999600 ) ) ; +#13225 = CARTESIAN_POINT ( 'NONE', ( 28.62775846615048200, -22.35851586569340200, -25.85924920113299000 ) ) ; +#13226 = CARTESIAN_POINT ( 'NONE', ( 37.18470362732184500, -30.18038934075435600, 21.52657297568481500 ) ) ; +#13227 = ORIENTED_EDGE ( 'NONE', *, *, #8311, .F. ) ; +#13228 = CARTESIAN_POINT ( 'NONE', ( 30.05539451500702300, -30.95182175102200600, 27.46234052558037000 ) ) ; +#13229 = EDGE_CURVE ( 'NONE', #6546, #4276, #1709, .T. ) ; +#13230 = CARTESIAN_POINT ( 'NONE', ( 3.541992259841322700, -28.89731146472071500, 21.88281511846009100 ) ) ; +#13231 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -96.63045792889080600, 22.10430763399311300 ) ) ; +#13232 = CARTESIAN_POINT ( 'NONE', ( 32.11638739827468900, -31.00935863103533700, 26.46600508216231900 ) ) ; +#13233 = CARTESIAN_POINT ( 'NONE', ( 28.53127154515153000, -10.21069795798272800, -25.03448263671365800 ) ) ; +#13234 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122092400, 0.1736481776669239200 ) ) ; +#13235 = CARTESIAN_POINT ( 'NONE', ( 11.16078270873864800, -12.49999999999999500, -21.21675133290845500 ) ) ; +#13236 = CC_DESIGN_APPROVAL ( #13943, ( #12290 ) ) ; +#13237 = PLANE ( 'NONE', #8300 ) ; +#13238 = AXIS2_PLACEMENT_3D ( 'NONE', #7380, #747, #8529 ) ; +#13239 = DIRECTION ( 'NONE', ( 0.3282949751751111900, 0.0000000000000000000, 0.9445752533677627100 ) ) ; +#13240 = CARTESIAN_POINT ( 'NONE', ( 5.925772001646778100, -94.72405989681685400, 15.71035575179025700 ) ) ; +#13241 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#13242 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13243 = CARTESIAN_POINT ( 'NONE', ( 0.04783885561061018700, 7.359713671239108000, -20.68999999999999800 ) ) ; +#13244 = CARTESIAN_POINT ( 'NONE', ( 10.75254729119413200, -30.79657295679999500, 27.78581929140579400 ) ) ; +#13245 = CARTESIAN_POINT ( 'NONE', ( 34.61373046781430000, -31.10585407300491700, 24.34978894928174100 ) ) ; +#13246 = CARTESIAN_POINT ( 'NONE', ( 22.97554418225178500, -12.49999999999993600, 22.05918264138611600 ) ) ; +#13247 = EDGE_CURVE ( 'NONE', #7532, #10215, #8902, .T. ) ; +#13248 = CARTESIAN_POINT ( 'NONE', ( 33.75788553145960000, -31.14518110019707100, 25.18234279785902200 ) ) ; +#13249 = ADVANCED_FACE ( 'NONE', ( #2950 ), #4296, .F. ) ; +#13250 = CARTESIAN_POINT ( 'NONE', ( 2.572071594901782700, -21.10705316055336300, 9.301441126252854000 ) ) ; +#13251 = CARTESIAN_POINT ( 'NONE', ( 39.93733329623092500, -9.958582620563259300, 20.89421597306240500 ) ) ; +#13252 = CARTESIAN_POINT ( 'NONE', ( 6.723600450896205100, -30.76794374181920200, 25.89030374372123000 ) ) ; +#13253 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -10.00000000000000000, -24.99999999999999600 ) ) ; +#13254 = CARTESIAN_POINT ( 'NONE', ( 33.17029737233508500, -31.32021948652878200, 16.83663281739285000 ) ) ; +#13255 = FACE_BOUND ( 'NONE', #6858, .T. ) ; +#13256 = CARTESIAN_POINT ( 'NONE', ( 7.994406505943484100, -30.04250851407844500, 26.64932437060362200 ) ) ; +#13257 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -90.07596123493894400, 15.95758058754439400 ) ) ; +#13258 = ORIENTED_EDGE ( 'NONE', *, *, #5376, .T. ) ; +#13259 = CARTESIAN_POINT ( 'NONE', ( 37.80209097682586600, -18.79507157364676900, 7.865349105762767600 ) ) ; +#13260 = CARTESIAN_POINT ( 'NONE', ( 30.16196108371935500, -30.52795425070418000, 27.49676432432501000 ) ) ; +#13261 = CARTESIAN_POINT ( 'NONE', ( 31.94962244991852200, -20.28809933267076800, -19.95777543028134500 ) ) ; +#13262 = CARTESIAN_POINT ( 'NONE', ( 8.633813785458503500, -30.57075299216218800, 26.99470404445933300 ) ) ; +#13263 = CARTESIAN_POINT ( 'NONE', ( 35.70698361060030400, -29.07124765011122800, 23.35057284275814700 ) ) ; +#13264 = CIRCLE ( 'NONE', #2920, 2.500000000000000900 ) ; +#13265 = EDGE_CURVE ( 'NONE', #3483, #12584, #5601, .T. ) ; +#13266 = CARTESIAN_POINT ( 'NONE', ( 4.720184648480235400, -30.40307588065208600, 24.55062566054206000 ) ) ; +#13267 = CARTESIAN_POINT ( 'NONE', ( 30.69264082599105900, -11.99261116098797500, -24.99999999999999600 ) ) ; +#13268 = EDGE_LOOP ( 'NONE', ( #6159, #9751, #1469, #14099 ) ) ; +#13269 = CARTESIAN_POINT ( 'NONE', ( 24.36023816005258500, -18.43160053501841100, -27.23178655993061900 ) ) ; +#13270 = CARTESIAN_POINT ( 'NONE', ( 25.77162851081120100, -33.18159435430132500, 26.28226339761569400 ) ) ; +#13271 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, 0.0000000000000000000 ) ) ; +#13272 = CARTESIAN_POINT ( 'NONE', ( 2.858998671062331600, -30.23079554074961500, 21.76056621848949000 ) ) ; +#13273 = CARTESIAN_POINT ( 'NONE', ( 23.91932020141407000, -18.48710689189727700, 23.50349406680181400 ) ) ; +#13274 = CARTESIAN_POINT ( 'NONE', ( 31.92675254126801900, -30.19301682915823200, 26.71819783298491700 ) ) ; +#13275 = CARTESIAN_POINT ( 'NONE', ( 30.21513839476101300, -12.66549609558552400, -25.08649169343632600 ) ) ; +#13276 = CARTESIAN_POINT ( 'NONE', ( 5.040142039297345300, -22.64158757611450700, 8.581674228102341900 ) ) ; +#13277 = CARTESIAN_POINT ( 'NONE', ( 15.83743403242044100, -12.49999999999999800, -13.89774347296245200 ) ) ; +#13278 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13279 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13280 = ORIENTED_EDGE ( 'NONE', *, *, #2360, .T. ) ; +#13281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13282 = ORIENTED_EDGE ( 'NONE', *, *, #3050, .T. ) ; +#13283 = CARTESIAN_POINT ( 'NONE', ( 37.79866652935048400, -18.80676532611060000, -11.58957833220102900 ) ) ; +#13284 = CARTESIAN_POINT ( 'NONE', ( 10.75130122548679700, -30.72482069862783400, 27.79634534652304000 ) ) ; +#13285 = CARTESIAN_POINT ( 'NONE', ( 34.75746016330275300, -30.10719717366379200, 25.01050072685734400 ) ) ; +#13286 = CARTESIAN_POINT ( 'NONE', ( 22.89271189647145700, -12.50000000000001200, 10.10978971336217900 ) ) ; +#13287 = CARTESIAN_POINT ( 'NONE', ( 33.81435970230492000, -30.07981897353884200, 25.63355205121580500 ) ) ; +#13288 = CARTESIAN_POINT ( 'NONE', ( 36.11038160434922900, -7.499999993154323100, 24.90746214474506800 ) ) ; +#13289 = CARTESIAN_POINT ( 'NONE', ( 37.51481572953488800, -20.54554820131489700, 7.938583070808040700 ) ) ; +#13290 = ORIENTED_EDGE ( 'NONE', *, *, #5553, .T. ) ; +#13291 = CARTESIAN_POINT ( 'NONE', ( 2.599780174776046500, -18.87839878413206300, 11.40035291088861900 ) ) ; +#13292 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 5.018561128876294600, 20.00000000000000000 ) ) ; +#13293 = CARTESIAN_POINT ( 'NONE', ( 6.760027487586726600, -29.99988080105709900, 25.97039453146269500 ) ) ; +#13294 = AXIS2_PLACEMENT_3D ( 'NONE', #861, #8642, #1955 ) ; +#13295 = CARTESIAN_POINT ( 'NONE', ( 35.75372131311841200, -34.13396898742752900, 12.66167394920889000 ) ) ; +#13296 = CARTESIAN_POINT ( 'NONE', ( 9.264686564331510600, -30.38043360242149800, 27.27115626181229800 ) ) ; +#13297 = DIRECTION ( 'NONE', ( 0.3282949751783045800, 0.0000000000000000000, -0.9445752533666528200 ) ) ; +#13298 = ORIENTED_EDGE ( 'NONE', *, *, #10468, .T. ) ; +#13299 = CARTESIAN_POINT ( 'NONE', ( 39.52872090307575800, -11.08850844467391500, 11.64395308345336500 ) ) ; +#13300 = CARTESIAN_POINT ( 'NONE', ( 37.49939576886387700, -21.21993214021437200, 7.927162399214510400 ) ) ; +#13301 = CARTESIAN_POINT ( 'NONE', ( 30.16697705657772500, -30.76251306076570200, 27.47100936357064400 ) ) ; +#13302 = CARTESIAN_POINT ( 'NONE', ( 34.34930629797813100, -100.0000000000000300, -29.71313003999630500 ) ) ; +#13303 = CARTESIAN_POINT ( 'NONE', ( 8.757066224385944500, -31.06294008772192300, 26.89929086439739700 ) ) ; +#13304 = CARTESIAN_POINT ( 'NONE', ( 36.35766321345935400, -29.97633654540603500, 23.42286262919580200 ) ) ; +#13305 = EDGE_LOOP ( 'NONE', ( #2531, #14162, #3335, #12315 ) ) ; +#13306 = EDGE_CURVE ( 'NONE', #7883, #1432, #8233, .T. ) ; +#13307 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9818, #8698, #10964, #4225 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.813077866773594800E-018, 0.0002332889620635112500 ), + .UNSPECIFIED. ) ; +#13308 = CARTESIAN_POINT ( 'NONE', ( 5.067190281594244900, -29.33420172184346000, 24.40323216080458800 ) ) ; +#13309 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -31.29513776008465000, 28.74509265499353500 ) ) ; +#13310 = VERTEX_POINT ( 'NONE', #2141 ) ; +#13311 = LINE ( 'NONE', #7809, #2508 ) ; +#13312 = ADVANCED_FACE ( 'NONE', ( #5892 ), #11185, .F. ) ; +#13313 = CARTESIAN_POINT ( 'NONE', ( 5.930242495864622900, -10.08110115129472600, 23.01640434106463900 ) ) ; +#13314 = PLANE ( 'NONE', #2129 ) ; +#13315 = CARTESIAN_POINT ( 'NONE', ( 3.166483139266250500, -29.08953696602702600, 21.96256565998794500 ) ) ; +#13316 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #322, #6978, #369 ), + ( #8127, #1459, #9256 ), + ( #2556, #10372, #3662 ), + ( #11508, #4776, #12608 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01713989320019458300, 0.02131698355508873300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9925899840658823900, 1.000000000000000000), + ( 1.000000000000000000, 0.9925656350905157600, 1.000000000000000000), + ( 1.000000000000000000, 0.9925381826870187700, 1.000000000000000000), + ( 1.000000000000000000, 0.9925075566829025800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#13317 = CARTESIAN_POINT ( 'NONE', ( 3.756871313281488600, -99.99999999999997200, 17.91973306515990000 ) ) ; +#13318 = ORIENTED_EDGE ( 'NONE', *, *, #6014, .T. ) ; +#13319 = CARTESIAN_POINT ( 'NONE', ( 31.95181817699273500, -30.77866338652005900, 26.66472282992555900 ) ) ; +#13320 = CARTESIAN_POINT ( 'NONE', ( 28.93975935771577900, -30.79701420218533800, 27.88206182837901200 ) ) ; +#13321 = CARTESIAN_POINT ( 'NONE', ( 38.07354520631746200, -9.902013067902119700, 16.25689119610126500 ) ) ; +#13322 = CARTESIAN_POINT ( 'NONE', ( 10.87527937106530000, -23.97207973362989000, 18.10930968474614400 ) ) ; +#13323 = CARTESIAN_POINT ( 'NONE', ( 8.260317628100436200, -21.33104459160655600, -20.35122237351148700 ) ) ; +#13324 = VERTEX_POINT ( 'NONE', #3296 ) ; +#13325 = CARTESIAN_POINT ( 'NONE', ( 16.52588349782476800, -18.56639440483293800, 20.95094700932362000 ) ) ; +#13326 = EDGE_CURVE ( 'NONE', #11308, #12287, #11468, .T. ) ; +#13327 = FACE_OUTER_BOUND ( 'NONE', #9850, .T. ) ; +#13328 = CARTESIAN_POINT ( 'NONE', ( 37.45631381408861000, -28.37363948782782300, 12.96722566847750200 ) ) ; +#13329 = ORIENTED_EDGE ( 'NONE', *, *, #10195, .T. ) ; +#13330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13331 = CARTESIAN_POINT ( 'NONE', ( 34.53901730193847900, -31.00441407579944900, 24.61162718053866200 ) ) ; +#13332 = CARTESIAN_POINT ( 'NONE', ( 25.80942046242918100, -24.17527278433471900, 19.55402022080197700 ) ) ; +#13333 = CARTESIAN_POINT ( 'NONE', ( 33.76606647480806300, -30.91761257356319300, 25.41906847940172300 ) ) ; +#13334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13335 = EDGE_LOOP ( 'NONE', ( #3184, #3970, #1226 ) ) ; +#13336 = CARTESIAN_POINT ( 'NONE', ( 3.168938396413731000, -19.53885897925852100, 12.82619847428522100 ) ) ; +#13337 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#13338 = CARTESIAN_POINT ( 'NONE', ( 6.975104311006252700, -31.05897366525788100, 25.85337303269304200 ) ) ; +#13339 = CARTESIAN_POINT ( 'NONE', ( -7.039288556221194900E-014, -9.999999999999966200, -17.03478347382739200 ) ) ; +#13340 = CARTESIAN_POINT ( 'NONE', ( 37.46772822918583800, -28.17430490410010400, 12.01230829561779800 ) ) ; +#13341 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -31.29513776008465000, 28.74509265499353500 ) ) ; +#13342 = CARTESIAN_POINT ( 'NONE', ( 11.26586904079728800, -30.82654731345162700, 27.93780948131385200 ) ) ; +#13343 = ORIENTED_EDGE ( 'NONE', *, *, #6416, .F. ) ; +#13344 = EDGE_CURVE ( 'NONE', #4588, #6439, #14111, .T. ) ; +#13345 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, -7.675015056199128200, 18.20720574984882500 ) ) ; +#13346 = CARTESIAN_POINT ( 'NONE', ( 37.50052893789565900, -20.40214447666636500, 7.960591098963710100 ) ) ; +#13347 = CARTESIAN_POINT ( 'NONE', ( 30.16168443498845500, -30.96224788340624200, 27.41935159997954200 ) ) ; +#13348 = CARTESIAN_POINT ( 'NONE', ( 8.731335211248477900, -30.68269905941852100, 27.02363611678646300 ) ) ; +#13349 = CARTESIAN_POINT ( 'NONE', ( 35.70835586994748900, -30.90618492433993600, 23.02723059723022900 ) ) ; +#13350 = ORIENTED_EDGE ( 'NONE', *, *, #12128, .T. ) ; +#13351 = CARTESIAN_POINT ( 'NONE', ( 29.53206591982003500, -20.27913217082072400, 21.44357368819051900 ) ) ; +#13352 = CARTESIAN_POINT ( 'NONE', ( 5.175553662626978000, -30.78012602836489700, 24.63255214295842400 ) ) ; +#13353 = CARTESIAN_POINT ( 'NONE', ( 3.830115433849580000, -10.00000000000000000, -24.86121076501348900 ) ) ; +#13354 = CARTESIAN_POINT ( 'NONE', ( 12.98977058470405100, -33.06024378525530900, 26.06186080495299300 ) ) ; +#13355 = CARTESIAN_POINT ( 'NONE', ( 38.32638734742576500, -10.10706017083766300, -19.04532335503297700 ) ) ; +#13356 = CARTESIAN_POINT ( 'NONE', ( 3.428173179408499300, -30.54215418607467900, 21.76589555673150000 ) ) ; +#13357 = ORIENTED_EDGE ( 'NONE', *, *, #7812, .T. ) ; +#13358 = CARTESIAN_POINT ( 'NONE', ( 28.69178602444792100, -20.40495225432020700, -25.69691834576784100 ) ) ; +#13359 = CARTESIAN_POINT ( 'NONE', ( 31.62551623106785200, -30.14760302122947500, 26.85326142145857600 ) ) ; +#13360 = CARTESIAN_POINT ( 'NONE', ( 1.408787201257297900, -10.31263235075543800, 16.69032718780240600 ) ) ; +#13361 = CARTESIAN_POINT ( 'NONE', ( 28.93953283714583700, -30.82802243446889200, 27.87670609847817700 ) ) ; +#13362 = CARTESIAN_POINT ( 'NONE', ( 36.43959295256981800, -28.87825036474213600, 21.82391255031751200 ) ) ; +#13363 = CARTESIAN_POINT ( 'NONE', ( 32.52834457311031700, -10.00000000000000400, 22.61931574724099300 ) ) ; +#13364 = CARTESIAN_POINT ( 'NONE', ( 7.991463910029249700, -12.50000000000001100, -18.58019810324899600 ) ) ; +#13365 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #13746, #448, #7068, #1546, #9339, #2634, #10461, #3750, #11591, #4854, #12694, #5988, #13793, #7113, #502, #8263, #1589, #9386, #2682, #10511, #3797, #11638, #4898, #12741, #6037, #13843, #7160 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 1, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -6.000000000013988700E-008, 0.0003056169349222059900, 0.0006112938698444120500, 0.001222647739688829400, 0.002445355479377661900, 0.003668063219066495500, 0.004890770958755322500, 0.007336186438132996600, 0.009781601917510672500, 0.01222701739688834700, 0.01344972513657718500, 0.01467243287626602200, 0.01711784835564369700, 0.01956326383502137600 ), + .UNSPECIFIED. ) ; +#13366 = CARTESIAN_POINT ( 'NONE', ( 1.355252715606880500E-017, -10.00000000000000000, -20.00000000000001100 ) ) ; +#13367 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 12.00000000000000000, 0.0000000000000000000 ) ) ; +#13368 = EDGE_LOOP ( 'NONE', ( #12986, #9867 ) ) ; +#13369 = CARTESIAN_POINT ( 'NONE', ( 3.511419523006238800, -30.23964820460290100, 23.10602428002077200 ) ) ; +#13370 = CARTESIAN_POINT ( 'NONE', ( 0.09958575560332341700, -9.900596664499715900, 10.45105727268742300 ) ) ; +#13371 = CARTESIAN_POINT ( 'NONE', ( 0.5099931314919002900, -11.06161724102691600, -14.54739229464686200 ) ) ; +#13372 = CARTESIAN_POINT ( 'NONE', ( 34.28359654174590100, -29.76773000909764000, 25.21130309693463500 ) ) ; +#13373 = CARTESIAN_POINT ( 'NONE', ( 27.71722736448017000, -12.50000000000000200, 20.92293326778732200 ) ) ; +#13374 = CARTESIAN_POINT ( 'NONE', ( 33.54669221736535400, -29.76247711459557600, 25.68925027251608400 ) ) ; +#13375 = VERTEX_POINT ( 'NONE', #1196 ) ; +#13376 = CARTESIAN_POINT ( 'NONE', ( 3.991470512670752600, -20.09099889975623300, 14.68802366281282300 ) ) ; +#13377 = CARTESIAN_POINT ( 'NONE', ( 9.621944140798028400, -95.07596123493893000, 15.43705539584693800 ) ) ; +#13378 = CARTESIAN_POINT ( 'NONE', ( 37.43209850538583100, -28.82237576669220000, 8.128999411480069900 ) ) ; +#13379 = CARTESIAN_POINT ( 'NONE', ( 6.889798910340828400, -30.35563711173908200, 26.11032305874015300 ) ) ; +#13380 = CARTESIAN_POINT ( 'NONE', ( -2.490161961181403000E-008, -10.00000000622538500, -11.53324907984514000 ) ) ; +#13381 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -27.09143239524033900, 6.754920151478379400 ) ) ; +#13382 = EDGE_CURVE ( 'NONE', #3696, #3383, #54, .T. ) ; +#13383 = CARTESIAN_POINT ( 'NONE', ( 11.98487419884252400, -10.15232558920095800, 24.97314088877156000 ) ) ; +#13384 = CARTESIAN_POINT ( 'NONE', ( 30.15371374435567700, -100.0000000000000100, -35.71244580412994900 ) ) ; +#13385 = CARTESIAN_POINT ( 'NONE', ( 37.60217796640550600, -19.58619009762802700, 7.992130768216043200 ) ) ; +#13386 = CARTESIAN_POINT ( 'NONE', ( 29.75985859974732900, -30.74547054113042300, 27.62265890294330400 ) ) ; +#13387 = CARTESIAN_POINT ( 'NONE', ( 0.09708713634879585800, 10.18993461597465900, -0.3605037269888274300 ) ) ; +#13388 = CARTESIAN_POINT ( 'NONE', ( 8.756995720212291400, -30.24986484615807600, 27.04281934401813100 ) ) ; +#13389 = CARTESIAN_POINT ( 'NONE', ( 35.98554888700105200, -29.72347610487982500, 23.77607343378144500 ) ) ; +#13390 = ORIENTED_EDGE ( 'NONE', *, *, #4461, .T. ) ; +#13391 = AXIS2_PLACEMENT_3D ( 'NONE', #3006, #10851, #4118 ) ; +#13392 = CARTESIAN_POINT ( 'NONE', ( 36.65978387031270100, -23.69604584631495600, 12.43655451429351500 ) ) ; +#13393 = CARTESIAN_POINT ( 'NONE', ( 5.175525809997045800, -29.73972709181905600, 24.81599470805494100 ) ) ; +#13394 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 5.018561128876298100, 20.00000000000000400 ) ) ; +#13395 = CARTESIAN_POINT ( 'NONE', ( 30.11676881209061600, -95.07596123493895800, 15.53794153442188800 ) ) ; +#13396 = EDGE_CURVE ( 'NONE', #7532, #11308, #6513, .T. ) ; +#13397 = CARTESIAN_POINT ( 'NONE', ( 17.46632411911336600, -19.90758453215411100, 23.25310724686140400 ) ) ; +#13398 = CARTESIAN_POINT ( 'NONE', ( 2.661077002746370400, -29.48593685997201400, 21.94362762307530800 ) ) ; +#13399 = CIRCLE ( 'NONE', #536, 9.999999999999998200 ) ; +#13400 = CARTESIAN_POINT ( 'NONE', ( 30.79092676920821600, -97.48421946027039600, 20.81157403906822600 ) ) ; +#13401 = CARTESIAN_POINT ( 'NONE', ( 31.66273689485490200, -30.65381621124372900, 26.84238444550911900 ) ) ; +#13402 = CIRCLE ( 'NONE', #611, 10.00000000000000000 ) ; +#13403 = DIRECTION ( 'NONE', ( -0.9769963564648046500, 0.03615756813141839800, 0.2101683842097053500 ) ) ; +#13404 = CARTESIAN_POINT ( 'NONE', ( 28.83715120693930300, -30.80737506797287400, 27.91117015594474900 ) ) ; +#13405 = CARTESIAN_POINT ( 'NONE', ( 37.48434649194339800, -29.60559266305192900, 21.69637350693658100 ) ) ; +#13406 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10272, #2443, #4673, #12513 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001983894412344177200 ), + .UNSPECIFIED. ) ; +#13407 = ORIENTED_EDGE ( 'NONE', *, *, #11982, .F. ) ; +#13408 = CARTESIAN_POINT ( 'NONE', ( 2.201425001453302300, -18.80570000581306500, 7.860836001971497600 ) ) ; +#13409 = CARTESIAN_POINT ( 'NONE', ( 15.26937601724214500, -12.50000000000001200, -13.13721216081199100 ) ) ; +#13410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#13411 = CARTESIAN_POINT ( 'NONE', ( 4.026749261489522200, -29.14954821099896900, 23.18744127305189600 ) ) ; +#13412 = FACE_OUTER_BOUND ( 'NONE', #2302, .T. ) ; +#13413 = CARTESIAN_POINT ( 'NONE', ( 16.46397211417156800, -9.904343869096969400, 25.81083933167184300 ) ) ; +#13414 = CARTESIAN_POINT ( 'NONE', ( 32.01359069869813100, -21.37396605102591700, -20.04338883161082700 ) ) ; +#13415 = CARTESIAN_POINT ( 'NONE', ( 11.63915079780887900, -38.80942609009380100, 18.72006599120648600 ) ) ; +#13416 = FACE_OUTER_BOUND ( 'NONE', #13368, .T. ) ; +#13417 = CARTESIAN_POINT ( 'NONE', ( 34.35214812855667800, -30.70239783646435300, 25.12918871591664400 ) ) ; +#13418 = VERTEX_POINT ( 'NONE', #10108 ) ; +#13419 = CARTESIAN_POINT ( 'NONE', ( 23.54499313163100300, -12.50000000000002700, 9.906006626128791100 ) ) ; +#13420 = EDGE_CURVE ( 'NONE', #3158, #1680, #2591, .T. ) ; +#13421 = CARTESIAN_POINT ( 'NONE', ( 33.65895501801251300, -30.60119350486869300, 25.70260971502903800 ) ) ; +#13422 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#13423 = CARTESIAN_POINT ( 'NONE', ( 5.316654299586333300, -20.48519320381186400, 16.81906481688621500 ) ) ; +#13424 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#13425 = CARTESIAN_POINT ( 'NONE', ( 33.53392442414321600, -36.63816599538937900, 15.40226373049534400 ) ) ; +#13426 = CARTESIAN_POINT ( 'NONE', ( 7.096405685896081100, -31.16342317430240500, 25.84692419789228200 ) ) ; +#13427 = CARTESIAN_POINT ( 'NONE', ( 34.58955302715498400, -100.0000000000000100, -2.838808089234957900 ) ) ; +#13428 = CARTESIAN_POINT ( 'NONE', ( 2.641574328341784700, -91.44579736576741900, -1.100180828916110600 ) ) ; +#13429 = CARTESIAN_POINT ( 'NONE', ( 12.16332012948477900, -30.94276565250678200, 28.16910212500916400 ) ) ; +#13430 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999997900, -100.0000000000000100, -26.47069336410935800 ) ) ; +#13431 = CARTESIAN_POINT ( 'NONE', ( 37.80023219604436200, -18.79709391701387100, 8.081300302928282200 ) ) ; +#13432 = ORIENTED_EDGE ( 'NONE', *, *, #4951, .T. ) ; +#13433 = CARTESIAN_POINT ( 'NONE', ( 29.75912165421476600, -30.91166831765216500, 27.58672872136411800 ) ) ; +#13434 = CARTESIAN_POINT ( 'NONE', ( 2.677258394701986800, -28.50079510796236100, 16.80090606710341200 ) ) ; +#13435 = CARTESIAN_POINT ( 'NONE', ( 8.932116985910195000, -30.80118501898349200, 27.08700867939387900 ) ) ; +#13436 = CARTESIAN_POINT ( 'NONE', ( 35.69465991805648000, -30.80412593201530000, 23.41821184632855300 ) ) ; +#13437 = CARTESIAN_POINT ( 'NONE', ( 12.95093844489441500, -30.77347370972987400, 28.36765821957191100 ) ) ; +#13438 = EDGE_LOOP ( 'NONE', ( #6645, #9469, #5929, #6151, #9689, #8647, #4946, #2188, #11878, #14357 ) ) ; +#13439 = EDGE_CURVE ( 'NONE', #11259, #10101, #6943, .T. ) ; +#13440 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -99.99999999999998600, 6.630571736238761300 ) ) ; +#13441 = CARTESIAN_POINT ( 'NONE', ( 5.502766134815722400, -31.06974452523305500, 24.55234282360066400 ) ) ; +#13442 = CARTESIAN_POINT ( 'NONE', ( 2.202355469325180800, -18.80942187730058300, 8.006624509372533900 ) ) ; +#13443 = CARTESIAN_POINT ( 'NONE', ( 17.44205019309341500, -33.35025653084942100, 26.50741664928542100 ) ) ; +#13444 = ORIENTED_EDGE ( 'NONE', *, *, #4845, .T. ) ; +#13445 = PLANE ( 'NONE', #1935 ) ; +#13446 = CARTESIAN_POINT ( 'NONE', ( 3.675118432994773700, -30.65989675917714800, 21.91688578743108500 ) ) ; +#13447 = CARTESIAN_POINT ( 'NONE', ( 31.62541823274534600, -31.09423728683321600, 26.68614311702782500 ) ) ; +#13448 = CARTESIAN_POINT ( 'NONE', ( 28.83674309294997700, -30.82257089366109400, 27.90860959353292300 ) ) ; +#13449 = CARTESIAN_POINT ( 'NONE', ( 36.47085850243703200, -30.55419442414701300, 21.52844374076754600 ) ) ; +#13450 = ORIENTED_EDGE ( 'NONE', *, *, #3708, .F. ) ; +#13451 = CARTESIAN_POINT ( 'NONE', ( 2.201731484662328600, -18.80692593864915800, 7.933192589737029000 ) ) ; +#13452 = CARTESIAN_POINT ( 'NONE', ( 5.985375456137739500, -21.82605933433302400, -16.80855449164586800 ) ) ; +#13453 = CARTESIAN_POINT ( 'NONE', ( 5.538705682251309900, -23.00293451517848100, 11.17336079941594400 ) ) ; +#13454 = CARTESIAN_POINT ( 'NONE', ( 2.185133262090871700, -11.92747418448642800, -19.08876031342025200 ) ) ; +#13455 = CARTESIAN_POINT ( 'NONE', ( 3.993904491616726100, -30.67367466130005100, 23.18093898079641600 ) ) ; +#13456 = VERTEX_POINT ( 'NONE', #6749 ) ; +#13457 = CARTESIAN_POINT ( 'NONE', ( 7.471655426889661600, -10.00000000000000000, 22.61931574724096100 ) ) ; +#13458 = ADVANCED_FACE ( 'NONE', ( #8557 ), #748, .T. ) ; +#13459 = CARTESIAN_POINT ( 'NONE', ( 29.77172307907573100, -12.50000000000015300, -20.61327989460554400 ) ) ; +#13460 = CARTESIAN_POINT ( 'NONE', ( 3.995593628823012300, -33.74406517579016200, 12.27921047214859800 ) ) ; +#13461 = CARTESIAN_POINT ( 'NONE', ( 34.00235322244562800, -29.52002522937304700, 25.25346066940546700 ) ) ; +#13462 = ORIENTED_EDGE ( 'NONE', *, *, #12221, .T. ) ; +#13463 = CARTESIAN_POINT ( 'NONE', ( 28.40273913073267300, -24.02962316883515800, 18.51724920088170400 ) ) ; +#13464 = CARTESIAN_POINT ( 'NONE', ( 33.41894808607273100, -29.65295154198983600, 25.71342186648303900 ) ) ; +#13465 = CARTESIAN_POINT ( 'NONE', ( 6.417307550943623300, -19.05801446240920100, 18.57945352932393500 ) ) ; +#13466 = CARTESIAN_POINT ( 'NONE', ( 17.59442521399260800, -19.87093624336306200, 23.25948761544210400 ) ) ; +#13467 = CARTESIAN_POINT ( 'NONE', ( 6.977042859387740500, -30.54026466792936400, 26.14533031061726500 ) ) ; +#13468 = CARTESIAN_POINT ( 'NONE', ( 28.07931111076170400, -100.0000000000000100, 5.299666842386454100 ) ) ; +#13469 = ORIENTED_EDGE ( 'NONE', *, *, #8753, .T. ) ; +#13470 = AXIS2_PLACEMENT_3D ( 'NONE', #9482, #637, #8411 ) ; +#13471 = CARTESIAN_POINT ( 'NONE', ( 22.49932347176402200, -19.90706702945534800, 23.25319916115345400 ) ) ; +#13472 = CARTESIAN_POINT ( 'NONE', ( 6.862319605248989900, -31.94518737986537400, 25.98029462689083900 ) ) ; +#13473 = CARTESIAN_POINT ( 'NONE', ( 10.68063154644356200, -10.57255871570810000, -25.03629273724883600 ) ) ; +#13474 = CARTESIAN_POINT ( 'NONE', ( 37.48819636210365000, -21.17995384080730800, 8.414306650243725400 ) ) ; +#13475 = ORIENTED_EDGE ( 'NONE', *, *, #1067, .T. ) ; +#13476 = CARTESIAN_POINT ( 'NONE', ( 29.55517223665094700, -30.71344984986003700, 27.69781127110045200 ) ) ; +#13477 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -27.09143239524033600, 6.754920151478383000 ) ) ; +#13478 = CARTESIAN_POINT ( 'NONE', ( 8.942853039733931200, -30.38713818213385000, 27.13548910590454000 ) ) ; +#13479 = CARTESIAN_POINT ( 'NONE', ( 35.62480880703916600, -29.32293526331771700, 23.77749623986042600 ) ) ; +#13480 = CARTESIAN_POINT ( 'NONE', ( 28.00353260893787400, -30.80109823641014100, 28.16369087974366500 ) ) ; +#13481 = EDGE_CURVE ( 'NONE', #6192, #13599, #2250, .T. ) ; +#13482 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #10476, #2645, #12706, #6003 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0001258833537872534500 ), + .UNSPECIFIED. ) ; +#13483 = ORIENTED_EDGE ( 'NONE', *, *, #8875, .F. ) ; +#13484 = DIRECTION ( 'NONE', ( -0.9998119252976105400, 0.01909902633347721600, 0.003367673647853373200 ) ) ; +#13485 = CARTESIAN_POINT ( 'NONE', ( 5.234619761849744500, -30.14647364491623100, 25.01119319624482200 ) ) ; +#13486 = CARTESIAN_POINT ( 'NONE', ( 5.791085446246327700, -12.50000000000077100, 14.09690519564736600 ) ) ; +#13487 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#13488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.630640067418198400E-014 ) ) ; +#13489 = ORIENTED_EDGE ( 'NONE', *, *, #7185, .T. ) ; +#13490 = AXIS2_PLACEMENT_3D ( 'NONE', #7444, #804, #8589 ) ; +#13491 = CARTESIAN_POINT ( 'NONE', ( 2.625315218806917100, -29.84776831921623600, 22.03376879450524900 ) ) ; +#13492 = CARTESIAN_POINT ( 'NONE', ( 20.78598416387928100, -27.93249662222787000, 27.46301701406089200 ) ) ; +#13493 = CARTESIAN_POINT ( 'NONE', ( 31.56265057873635600, -30.54731509598692400, 26.90512717499280600 ) ) ; +#13494 = CARTESIAN_POINT ( 'NONE', ( 28.83717125733578300, -30.83582453278405600, 27.90614790761862500 ) ) ; +#13495 = CARTESIAN_POINT ( 'NONE', ( 37.17076097484565600, -29.25859258328005200, 21.82070738275943000 ) ) ; +#13496 = CARTESIAN_POINT ( 'NONE', ( 28.44837602279989900, -28.67366662734983200, 28.34856840950120100 ) ) ; +#13497 = CARTESIAN_POINT ( 'NONE', ( 5.103423814902560800, -12.50000000000020400, 11.73870128111835600 ) ) ; +#13498 = CARTESIAN_POINT ( 'NONE', ( 8.984389302049725900, -12.59625380158118100, -24.87261456898196600 ) ) ; +#13499 = EDGE_CURVE ( 'NONE', #10169, #4476, #229, .T. ) ; +#13500 = CARTESIAN_POINT ( 'NONE', ( 3.812316752044581800, -29.56609446746379500, 23.43794389419615600 ) ) ; +#13501 = ORIENTED_EDGE ( 'NONE', *, *, #8459, .F. ) ; +#13502 = CARTESIAN_POINT ( 'NONE', ( 4.170289409704782500, -19.79869320978811200, 15.10380698118805000 ) ) ; +#13503 = CARTESIAN_POINT ( 'NONE', ( 24.03826490299388800, -12.50000000000002000, -14.00411709293908700 ) ) ; +#13504 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999987600, -27.19836366044979700, 6.839812882137907800 ) ) ; +#13505 = CARTESIAN_POINT ( 'NONE', ( 34.21791217538552100, -30.44940104470960000, 25.36323535050289000 ) ) ; +#13506 = ORIENTED_EDGE ( 'NONE', *, *, #12286, .F. ) ; +#13507 = CARTESIAN_POINT ( 'NONE', ( 29.59026878407933500, -12.50000000000206600, 19.86646019133251100 ) ) ; +#13508 = CARTESIAN_POINT ( 'NONE', ( 33.57732970287266700, -30.41748735450417100, 25.80977658254140600 ) ) ; +#13509 = CARTESIAN_POINT ( 'NONE', ( 10.85515228491492000, -30.81741806630201500, 27.81486867636284200 ) ) ; +#13510 = CARTESIAN_POINT ( 'NONE', ( 8.331968463811035600, -19.46644124460048200, 20.22525436173879500 ) ) ; +#13511 = CARTESIAN_POINT ( 'NONE', ( 26.86057497700887000, -28.10722049513918500, 27.02094924217768600 ) ) ; +#13512 = CARTESIAN_POINT ( 'NONE', ( 34.84525499268891500, -22.22272699308425100, -13.95894790192051400 ) ) ; +#13513 = CARTESIAN_POINT ( 'NONE', ( 7.096085072413553800, -29.79605467302737800, 26.08854206263433500 ) ) ; +#13514 = DIRECTION ( 'NONE', ( -0.9445752533677627100, 0.0000000000000000000, 0.3282949751751111400 ) ) ; +#13515 = ORIENTED_EDGE ( 'NONE', *, *, #8977, .F. ) ; +#13516 = CARTESIAN_POINT ( 'NONE', ( 39.94660925533538900, -10.21356297865845500, 11.18051180378579400 ) ) ; +#13517 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9538, #1729, #3949, #11783 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.001180033516842416600 ), + .UNSPECIFIED. ) ; +#13518 = CARTESIAN_POINT ( 'NONE', ( 3.962492621062560600, -30.78111908891284200, 21.81492603105635900 ) ) ; +#13519 = CARTESIAN_POINT ( 'NONE', ( 6.948364755263215300, -11.87905513137166300, 21.60107712757220400 ) ) ; +#13520 = EDGE_CURVE ( 'NONE', #2183, #12521, #7784, .T. ) ; +#13521 = CARTESIAN_POINT ( 'NONE', ( 37.46186347907307400, -20.35098412647510100, 9.064296896636069100 ) ) ; +#13522 = CARTESIAN_POINT ( 'NONE', ( 14.11468084137680600, -14.24115460694442700, 24.25217001343972000 ) ) ; +#13523 = CARTESIAN_POINT ( 'NONE', ( 9.040865690700190500, -30.95925626363991500, 27.08109402767542000 ) ) ; +#13524 = CARTESIAN_POINT ( 'NONE', ( 35.90108922530885800, -30.45273520144507300, 23.75879773005216200 ) ) ; +#13525 = CARTESIAN_POINT ( 'NONE', ( 33.17937660017891200, -29.11714866038312300, 26.41404354038882100 ) ) ; +#13526 = CARTESIAN_POINT ( 'NONE', ( 24.16129379271428600, -18.44701260684512800, 23.51056377103062200 ) ) ; +#13527 = CARTESIAN_POINT ( 'NONE', ( 5.848390441902910900, -31.14605228387808500, 24.80496607283187800 ) ) ; +#13528 = CARTESIAN_POINT ( 'NONE', ( 15.42200421681526700, -12.49999999999998600, 8.997149703346407200 ) ) ; +#13529 = CARTESIAN_POINT ( 'NONE', ( 0.4558659047385529800, -11.82346361895414200, 8.182006312827281700 ) ) ; +#13530 = CARTESIAN_POINT ( 'NONE', ( 34.91196763790573200, -31.43593262981619000, 24.96524374446361700 ) ) ; +#13531 = VERTEX_POINT ( 'NONE', #4551 ) ; +#13532 = CARTESIAN_POINT ( 'NONE', ( 3.673285872276118400, -28.92438003461446900, 22.22232194065612600 ) ) ; +#13533 = PLANE ( 'NONE', #1181 ) ; +#13534 = CARTESIAN_POINT ( 'NONE', ( 14.53867488856405500, -30.65936817455452300, 28.70849270624885500 ) ) ; +#13535 = CARTESIAN_POINT ( 'NONE', ( 31.53968764700197600, -31.01848087676128800, 26.77271008170888700 ) ) ; +#13536 = CARTESIAN_POINT ( 'NONE', ( 29.61982331297125600, -10.25460760049137400, -25.00000000000000400 ) ) ; +#13537 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342983700, 27.93782961424065500 ) ) ; +#13538 = CARTESIAN_POINT ( 'NONE', ( 36.86360776321502200, -30.39025028945572500, 21.62052497704973000 ) ) ; +#13539 = CARTESIAN_POINT ( 'NONE', ( 31.01036078033012800, -20.47727147411663400, 20.46578027309760700 ) ) ; +#13540 = CARTESIAN_POINT ( 'NONE', ( 15.21685472350922600, -12.50000000000005300, 8.615035036175609000 ) ) ; +#13541 = CARTESIAN_POINT ( 'NONE', ( 3.676724236118906800, -30.66059900155805100, 21.91634669078289100 ) ) ; +#13542 = CARTESIAN_POINT ( 'NONE', ( 4.460896112346130600, -30.93839718661244800, 23.30136740195660400 ) ) ; +#13543 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9317, #2612, #3729, #11569, #4830, #12672 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.002128540118321336200, 0.003192548568959127100, 0.004256557019596918100 ), + .UNSPECIFIED. ) ; +#13544 = AXIS2_PLACEMENT_3D ( 'NONE', #10621, #3899, #11735 ) ; +#13545 = CARTESIAN_POINT ( 'NONE', ( 29.50199942055586900, -21.06287694234811500, -22.26580708537280300 ) ) ; +#13546 = CARTESIAN_POINT ( 'NONE', ( 37.18446597088564000, -96.31691378401171700, 12.92977595461171300 ) ) ; +#13547 = CARTESIAN_POINT ( 'NONE', ( 33.99233934491287100, -31.15490489382310800, 24.95221166392417800 ) ) ; +#13548 = CARTESIAN_POINT ( 'NONE', ( 23.85941692413202700, -12.50000000000000500, 9.727199104803849700 ) ) ; +#13549 = CARTESIAN_POINT ( 'NONE', ( 33.41937264163835400, -31.16752620906396800, 25.44698844781168400 ) ) ; +#13550 = CARTESIAN_POINT ( 'NONE', ( 10.85428158145375500, -30.75494156021430600, 27.82493421972903000 ) ) ; +#13551 = CARTESIAN_POINT ( 'NONE', ( 10.05975445728709200, -19.78497751124109500, 21.27865395550533000 ) ) ; +#13552 = CARTESIAN_POINT ( 'NONE', ( 37.81486673790828900, -11.92747418448650300, -19.08876031342177300 ) ) ; +#13553 = CARTESIAN_POINT ( 'NONE', ( 34.41995411413935800, -12.49999999999986300, -14.39047314077596300 ) ) ; +#13554 = CARTESIAN_POINT ( 'NONE', ( 7.275383364940079600, -30.74451186295043900, 26.25428448842626800 ) ) ; +#13555 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999992000, -12.50000000000001200, 7.564513562858108400 ) ) ; +#13556 = EDGE_CURVE ( 'NONE', #1640, #10364, #6765, .T. ) ; +#13557 = CARTESIAN_POINT ( 'NONE', ( 47.49999999999999300, -21.23105625617649700, 7.788262581895397200 ) ) ; +#13558 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669239200, -0.9848077530122092400 ) ) ; +#13559 = CARTESIAN_POINT ( 'NONE', ( 0.4741107994920885600, -11.89233879589075100, 8.927486964392816300 ) ) ; +#13560 = CARTESIAN_POINT ( 'NONE', ( 37.42419796331841300, -19.56322742879724800, 10.35196327875251600 ) ) ; +#13561 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, -100.0000000000000100, -6.100827442047407300 ) ) ; +#13562 = CARTESIAN_POINT ( 'NONE', ( 9.031094572773488600, -30.57298912598471900, 27.17156609311871300 ) ) ; +#13563 = CARTESIAN_POINT ( 'NONE', ( 35.32293088967099200, -29.16349704416610000, 23.86590014670710100 ) ) ; +#13564 = CARTESIAN_POINT ( 'NONE', ( 35.09931401287780500, -28.61651756938921700, 22.99860430057734500 ) ) ; +#13565 = CYLINDRICAL_SURFACE ( 'NONE', #4961, 1.200000000000005700 ) ; +#13566 = CARTESIAN_POINT ( 'NONE', ( 25.17218618865510000, -16.12391840356920600, 23.92018795779368300 ) ) ; +#13567 = LINE ( 'NONE', #11424, #13739 ) ; +#13568 = CARTESIAN_POINT ( 'NONE', ( 5.594950099180039200, -30.42980104374719400, 25.23834519552962900 ) ) ; +#13569 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12599, #4716, #13706, #7021, #404, #8169 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.06378410914521705200, 0.1275682182904341000 ), + .UNSPECIFIED. ) ; +#13570 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999998600, -21.23105625617651900, -11.53187062879839100 ) ) ; +#13571 = ORIENTED_EDGE ( 'NONE', *, *, #5815, .T. ) ; +#13572 = CARTESIAN_POINT ( 'NONE', ( 7.471775029781065700, -23.53474289106726800, 14.98523558988941300 ) ) ; +#13573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13574 = CARTESIAN_POINT ( 'NONE', ( 30.61202711287617400, -32.50601298519165300, 24.97936677395240000 ) ) ; +#13575 = EDGE_CURVE ( 'NONE', #4476, #4566, #10956, .T. ) ; +#13576 = CARTESIAN_POINT ( 'NONE', ( 2.907593571412650800, -30.21918522111595000, 22.08152910647486800 ) ) ; +#13577 = DESIGN_CONTEXT ( 'detailed design', #8958, 'design' ) ; +#13578 = CARTESIAN_POINT ( 'NONE', ( 17.43130776465946500, -19.87468148800577000, 23.25870750476287400 ) ) ; +#13579 = CARTESIAN_POINT ( 'NONE', ( 31.35479020858748100, -30.37777178780599700, 27.00442838320190100 ) ) ; +#13580 = CARTESIAN_POINT ( 'NONE', ( 28.73401461457650900, -30.82655086342984400, 27.93782961424065500 ) ) ; +#13581 = CARTESIAN_POINT ( 'NONE', ( 36.58965585040967000, -28.97657540789551300, 21.98654230077327300 ) ) ; +#13582 = CARTESIAN_POINT ( 'NONE', ( 14.24166765707604100, -100.0000000000000100, 6.197625101945631000 ) ) ; +#13583 = CARTESIAN_POINT ( 'NONE', ( 31.31013182561900300, -27.02105893424742400, 19.16180118353434400 ) ) ; +#13584 = CARTESIAN_POINT ( 'NONE', ( 5.112040533662845800, -31.07259013426053000, 24.05270526333325200 ) ) ; +#13585 = ORIENTED_EDGE ( 'NONE', *, *, #6108, .T. ) ; +#13586 = CARTESIAN_POINT ( 'NONE', ( 3.928098972995465000, -29.99235741808464400, 23.77517758450318300 ) ) ; +#13587 = CARTESIAN_POINT ( 'NONE', ( 26.37675003751874300, -14.46566888762968800, -25.78741791179954400 ) ) ; +#13588 = CARTESIAN_POINT ( 'NONE', ( 23.38675710623856600, -19.56561309030346200, 23.32267344219933500 ) ) ; +#13589 = CARTESIAN_POINT ( 'NONE', ( 17.50067652823596400, -19.90706702945584200, 23.25319916115336800 ) ) ; +#13590 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 51.02052347080197600, 33.25956466485612100 ) ) ; +#13591 = ADVANCED_FACE ( 'NONE', ( #10849 ), #1564, .F. ) ; +#13592 = CARTESIAN_POINT ( 'NONE', ( 17.68719383516401000, -30.65917406624153300, 28.85723021296909300 ) ) ; +#13593 = CARTESIAN_POINT ( 'NONE', ( 28.47919793388919600, -12.49999999999978200, -21.42065673270690200 ) ) ; +#13594 = CARTESIAN_POINT ( 'NONE', ( 39.54653455102932500, -10.00000000000000000, -21.07905501514410300 ) ) ; +#13595 = CARTESIAN_POINT ( 'NONE', ( 33.93508147743232700, -30.26634328872226800, 25.57768752352759000 ) ) ; +#13596 = CARTESIAN_POINT ( 'NONE', ( 29.54722141011551500, -23.93285246372952800, 17.82700257790676800 ) ) ; +#13597 = EDGE_CURVE ( 'NONE', #9403, #950, #13749, .T. ) ; +#13598 = CARTESIAN_POINT ( 'NONE', ( 33.37653088993730000, -30.22403038801631300, 25.93883502558064800 ) ) ; +#13599 = VERTEX_POINT ( 'NONE', #11659 ) ; +#13600 = CARTESIAN_POINT ( 'NONE', ( 11.06012290659357900, -30.83521972551502400, 27.87528730076831700 ) ) ; +#13601 = CARTESIAN_POINT ( 'NONE', ( 11.41496569912724700, -20.05711289731560500, 21.92614978891731100 ) ) ; +#13602 = CARTESIAN_POINT ( 'NONE', ( 15.18990223526341900, -12.49999999999999800, -12.95774450347311000 ) ) ; +#13603 = CARTESIAN_POINT ( 'NONE', ( 2.015497905913271400, -11.89736398432701000, -18.74592009292127400 ) ) ; +#13604 = CARTESIAN_POINT ( 'NONE', ( 24.93221334673513900, -12.49999999999989500, -12.56881426719700600 ) ) ; +#13605 = CARTESIAN_POINT ( 'NONE', ( 4.873117667072083500, -12.49999999999824000, 9.594998573023442400 ) ) ; +#13606 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 9.500000000000000000, -15.51856112887629800 ) ) ; +#13607 = CARTESIAN_POINT ( 'NONE', ( 24.16625608387880300, -12.50000000000002700, 9.492893642485938700 ) ) ; +#13608 = VERTEX_POINT ( 'NONE', #7180 ) ; +#13609 = CARTESIAN_POINT ( 'NONE', ( 37.27628815193926200, -18.89042402874161300, 11.89860733717308600 ) ) ; +#13610 = CARTESIAN_POINT ( 'NONE', ( 40.00009375905047900, -9.999999999999998200, -12.75307253643268800 ) ) ; +#13611 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#13612 = CARTESIAN_POINT ( 'NONE', ( 9.243766332941460100, -31.01862075401054100, 27.14760855117899000 ) ) ; +#13613 = CARTESIAN_POINT ( 'NONE', ( 35.80987376664575800, -30.19280446966277900, 24.07291234113595400 ) ) ; +#13614 = ORIENTED_EDGE ( 'NONE', *, *, #8482, .F. ) ; +#13615 = CARTESIAN_POINT ( 'NONE', ( 27.41640404629844200, -11.87724389807648600, 24.55522993379391000 ) ) ; +#13616 = CARTESIAN_POINT ( 'NONE', ( 5.837362845108296000, -29.47850153826634000, 25.11269174670905000 ) ) ; +#13617 = CARTESIAN_POINT ( 'NONE', ( 9.734295934249636700E-006, -9.999999999999944900, 7.921725838294983100 ) ) ; +#13618 = EDGE_LOOP ( 'NONE', ( #12931, #5260, #1829, #4524 ) ) ; +#13619 = CARTESIAN_POINT ( 'NONE', ( 1.778472214120223600, -10.00000000000000000, -19.28939737522668100 ) ) ; +#13620 = CARTESIAN_POINT ( 'NONE', ( 23.85530783148903900, -31.25524091047422100, 28.72140076242264300 ) ) ; +#13621 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, 19.48143887112370700 ) ) ; +#13622 = CARTESIAN_POINT ( 'NONE', ( 3.452434683881841600, -29.05211032468799500, 22.29445049917232400 ) ) ; +#13623 = CARTESIAN_POINT ( 'NONE', ( 37.60049198882298800, -19.59809723115857900, -11.52467240159017900 ) ) ; +#13624 = ORIENTED_EDGE ( 'NONE', *, *, #1247, .F. ) ; +#13625 = CARTESIAN_POINT ( 'NONE', ( 31.36220662965756700, -30.82852678886053600, 26.94134721434169300 ) ) ; +#13626 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 3.469446951953615200E-016, -1.000000000000000000 ) ) ; +#13627 = CARTESIAN_POINT ( 'NONE', ( 37.35881938598218000, -30.02612565854915500, 21.79520193574888500 ) ) ; +#13628 = CARTESIAN_POINT ( 'NONE', ( 9.212216545470898400, -22.03500000000001400, 17.18631921226190000 ) ) ; +#13629 = AXIS2_PLACEMENT_3D ( 'NONE', #6129, #13938, #7259 ) ; +#13630 = CARTESIAN_POINT ( 'NONE', ( 36.71318155324213700, -28.85456251044263400, 21.04573382848725400 ) ) ; +#13631 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, 9.934684141622275500 ) ) ; +#13632 = VERTEX_POINT ( 'NONE', #10535 ) ; +#13633 = CARTESIAN_POINT ( 'NONE', ( 7.361105072722078400, -31.15644970619691300, 26.03875529670953200 ) ) ; +#13634 = FACE_OUTER_BOUND ( 'NONE', #4308, .T. ) ; +#13635 = CARTESIAN_POINT ( 'NONE', ( 4.482461231270896500, -29.11437430818180900, 23.60985096259665300 ) ) ; +#13636 = EDGE_CURVE ( 'NONE', #1461, #2517, #570, .T. ) ; +#13637 = CARTESIAN_POINT ( 'NONE', ( 32.99325714593112500, -13.85888073711435300, -25.68042478927498700 ) ) ; +#13638 = CARTESIAN_POINT ( 'NONE', ( 37.39336454583970900, -19.94033355002836000, 10.10928816722846000 ) ) ; +#13639 = CARTESIAN_POINT ( 'NONE', ( 11.76044685354143500, -10.00000000000037700, -24.99999999999999300 ) ) ; +#13640 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669238900, 0.9848077530122092400 ) ) ; +#13641 = CARTESIAN_POINT ( 'NONE', ( 15.83302290597720600, -12.50000000000001600, 9.492190126455534800 ) ) ; +#13642 = ORIENTED_EDGE ( 'NONE', *, *, #9190, .F. ) ; +#13643 = CARTESIAN_POINT ( 'NONE', ( 23.54684323921819800, -12.49999999999998600, -14.31447407494688500 ) ) ; +#13644 = CARTESIAN_POINT ( 'NONE', ( 35.46392280955367900, -10.00000000000000200, -22.55926456751796000 ) ) ; +#13645 = CARTESIAN_POINT ( 'NONE', ( 31.86786833919145000, -12.49999999999928900, 17.86891120781359300 ) ) ; +#13646 = CARTESIAN_POINT ( 'NONE', ( 33.30293216279356000, -31.01549072091910000, 25.68886211541125400 ) ) ; +#13647 = VERTEX_POINT ( 'NONE', #564 ) ; +#13648 = CARTESIAN_POINT ( 'NONE', ( 11.06034751428688700, -30.80425983160406700, 27.88085765501303500 ) ) ; +#13649 = CARTESIAN_POINT ( 'NONE', ( 13.23209793587490100, -19.16889275829098300, 22.79194398191754100 ) ) ; +#13650 = CARTESIAN_POINT ( 'NONE', ( 5.636956117675599600, -21.95386731532425600, -15.88969761275092000 ) ) ; +#13651 = CARTESIAN_POINT ( 'NONE', ( 36.95699834639923200, -10.00000000000000400, -24.20601281109644600 ) ) ; +#13652 = CARTESIAN_POINT ( 'NONE', ( 34.43197559513161800, -21.98388691068072000, -15.67620658356514900 ) ) ; +#13653 = FACE_OUTER_BOUND ( 'NONE', #9607, .T. ) ; +#13654 = CARTESIAN_POINT ( 'NONE', ( 15.05150201241739100, -12.50000000000002700, 8.084827352696676100 ) ) ; +#13655 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4332, #11019, #5430, #13273, #6568, #14365, #7706, #1056, #8848, #2144, #9967, #3255, #11101, #4375 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005065908857742775100, 0.001013181771548555000, 0.002026363543097096200, 0.004052727086194181000, 0.006079090629291266300, 0.008105454172388349900 ), + .UNSPECIFIED. ) ; +#13656 = CARTESIAN_POINT ( 'NONE', ( 17.43465161926726700, -19.89041937359877800, 23.25607337200535300 ) ) ; +#13657 = CARTESIAN_POINT ( 'NONE', ( 7.880164322323175000, -95.07596123493895800, 15.73892173084881200 ) ) ; +#13658 = EDGE_LOOP ( 'NONE', ( #6525, #13877, #10961, #8684 ) ) ; +#13659 = CARTESIAN_POINT ( 'NONE', ( 36.35200092360810900, -20.74278192645474000, 13.71831911766869400 ) ) ; +#13660 = CARTESIAN_POINT ( 'NONE', ( 25.92028516076935000, -10.00000000000000000, -29.00187203077984700 ) ) ; +#13661 = CARTESIAN_POINT ( 'NONE', ( 2.117525709379604000, -11.91741274050321300, -18.95475523009079000 ) ) ; +#13662 = CARTESIAN_POINT ( 'NONE', ( 9.228266818714512700, -30.69024508775373800, 27.24151508522785300 ) ) ; +#13663 = CARTESIAN_POINT ( 'NONE', ( 35.32182515626158900, -30.99761711604046300, 23.54163855982117300 ) ) ; +#13664 = FACE_OUTER_BOUND ( 'NONE', #5790, .T. ) ; +#13665 = ORIENTED_EDGE ( 'NONE', *, *, #10515, .F. ) ; +#13666 = CARTESIAN_POINT ( 'NONE', ( 17.65009325285707200, -28.77556518705056700, 29.18936127947247200 ) ) ; +#13667 = EDGE_CURVE ( 'NONE', #5584, #305, #13067, .T. ) ; +#13668 = FACE_BOUND ( 'NONE', #9805, .T. ) ; +#13669 = ADVANCED_FACE ( 'NONE', ( #5200 ), #7116, .F. ) ; +#13670 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13671 = CARTESIAN_POINT ( 'NONE', ( 5.827162170027666100, -30.71658376196649000, 25.26043332992935600 ) ) ; +#13672 = ORIENTED_EDGE ( 'NONE', *, *, #13247, .T. ) ; +#13673 = CARTESIAN_POINT ( 'NONE', ( 0.4534654489579404400, -10.00000000000000000, -21.07905501514818900 ) ) ; +#13674 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -30.66316004086981600, 28.85652737809770600 ) ) ; +#13675 = AXIS2_PLACEMENT_3D ( 'NONE', #5242, #8549, #13084 ) ; +#13676 = CARTESIAN_POINT ( 'NONE', ( 3.603532354895725700, -30.62825430914203300, 22.32689316773635500 ) ) ; +#13677 = FACE_OUTER_BOUND ( 'NONE', #13268, .T. ) ; +#13678 = ORIENTED_EDGE ( 'NONE', *, *, #6949, .F. ) ; +#13679 = CARTESIAN_POINT ( 'NONE', ( 31.24386026168237900, -30.25984371170486000, 27.04363800799144700 ) ) ; +#13680 = CARTESIAN_POINT ( 'NONE', ( 13.15273288870218800, -28.08123352512509600, 26.96594673378285400 ) ) ; +#13681 = CARTESIAN_POINT ( 'NONE', ( 7.268177503835245200, -30.40608700326471600, 26.32576467238493800 ) ) ; +#13682 = CARTESIAN_POINT ( 'NONE', ( 36.38010964547523000, -28.90516186991221700, 22.05818541765456300 ) ) ; +#13683 = CARTESIAN_POINT ( 'NONE', ( 6.266058495799803100, -100.0000000000000100, -0.5025220806101574600 ) ) ; +#13684 = CARTESIAN_POINT ( 'NONE', ( 35.68600719573236500, -22.42838333629142500, 14.84957045941598300 ) ) ; +#13685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13686 = CARTESIAN_POINT ( 'NONE', ( 9.838211988003307000, -30.96217207923201900, 27.41921016360303300 ) ) ; +#13687 = EDGE_CURVE ( 'NONE', #4109, #5085, #7838, .T. ) ; +#13688 = CARTESIAN_POINT ( 'NONE', ( 4.038322042703694800, -30.29288179585409700, 23.82543592385007300 ) ) ; +#13689 = CARTESIAN_POINT ( 'NONE', ( 37.72071106493803000, -12.42663060970129300, -19.01768978588488700 ) ) ; +#13690 = CARTESIAN_POINT ( 'NONE', ( 5.474808194957788000, -94.72210163403910600, 15.44587895064652700 ) ) ; +#13691 = CARTESIAN_POINT ( 'NONE', ( 11.07823233330134000, -10.31232462283504800, -25.03306748087323200 ) ) ; +#13692 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.04517183358049700, 16.23828164246650700 ) ) ; +#13693 = CARTESIAN_POINT ( 'NONE', ( 27.61949472512447900, -30.78998084601592600, 28.24575809354558200 ) ) ; +#13694 = EDGE_LOOP ( 'NONE', ( #12279, #12309, #12415, #12578 ) ) ; +#13695 = CARTESIAN_POINT ( 'NONE', ( 27.21028596879790800, -20.89214405319086900, -23.48216280368353600 ) ) ; +#13696 = CARTESIAN_POINT ( 'NONE', ( 33.26375153602932500, -12.39678711472198600, -23.83302404275931300 ) ) ; +#13697 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1148, #2232, #10056, #3342, #11190, #4465, #12292, #5568, #13395, #6704, #104, #7845, #1195, #8981, #2281, #10107 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 1, 2, 2, 1, 2, 4 ), + ( 0.0000000000000000000, 0.2012099716563531300, 0.3018149574845296900, 0.4024199433127062000, 0.4527224362267947600, 0.5030249291408832600, 0.6036299149690603800, 0.7042349007972375000, 0.8048398866254145000 ), + .UNSPECIFIED. ) ; +#13698 = CARTESIAN_POINT ( 'NONE', ( 24.25173822562370800, -12.49999999999999800, 9.403023360769749300 ) ) ; +#13699 = CARTESIAN_POINT ( 'NONE', ( 33.21479602598633800, -29.90155133526390700, 25.94995429555181900 ) ) ; +#13700 = VERTEX_POINT ( 'NONE', #6147 ) ; +#13701 = CARTESIAN_POINT ( 'NONE', ( 11.16273929066022900, -30.83544489884100400, 27.90619495621559700 ) ) ; +#13702 = CARTESIAN_POINT ( 'NONE', ( 14.72097767094758900, -19.43939079967394400, 23.08317054090151600 ) ) ; +#13703 = CARTESIAN_POINT ( 'NONE', ( 5.984728989968453500, -12.49999999999997000, -15.41735972227489500 ) ) ; +#13704 = DIRECTION ( 'NONE', ( -0.4174883340625358800, -0.03332900164316921600, -0.9080708499732597100 ) ) ; +#13705 = CARTESIAN_POINT ( 'NONE', ( 33.71072529894895800, -12.50000000000084600, -16.05698412163262400 ) ) ; +#13706 = CARTESIAN_POINT ( 'NONE', ( 22.45764136193946900, -19.89621047683207400, 23.25503108616478800 ) ) ; +#13707 = CARTESIAN_POINT ( 'NONE', ( 24.68892185019705100, -95.07596123493894400, 16.84678238284579500 ) ) ; +#13708 = CARTESIAN_POINT ( 'NONE', ( 11.49583420521074100, -94.71789415297469400, 18.03626465743870400 ) ) ; +#13709 = EDGE_CURVE ( 'NONE', #6606, #13647, #8194, .T. ) ; +#13710 = CARTESIAN_POINT ( 'NONE', ( 34.99504121424006100, -20.00989794676228300, 16.43091595716601100 ) ) ; +#13711 = CARTESIAN_POINT ( 'NONE', ( 31.92504062929953100, -20.33903573856376900, -23.48694198763997000 ) ) ; +#13712 = CARTESIAN_POINT ( 'NONE', ( 1.778472214120794900, -10.00000000000033600, -19.28939737522753000 ) ) ; +#13713 = CARTESIAN_POINT ( 'NONE', ( 9.243808940277549600, -30.37529723831839900, 27.26094775898413000 ) ) ; +#13714 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3402, #2336, #10162 ), + ( #3446, #11293, #4559 ), + ( #12393, #5678, #13496 ), + ( #6804, #204, #7950 ), + ( #1285, #9082, #2384 ), + ( #10210, #3491, #11336 ), + ( #4608, #12437, #5724 ), + ( #13539, #6851, #242 ), + ( #7993, #1333, #9129 ), + ( #2423, #10255, #3538 ), + ( #11381, #4649, #12489 ), + ( #5773, #13583, #6897 ), + ( #292, #8042, #1380 ), + ( #9177, #2469, #10292 ), + ( #3589, #11428, #4694 ), + ( #12535, #5823, #13630 ), + ( #6945, #338, #8092 ), + ( #1426, #9223, #2522 ), + ( #10336, #3629, #11478 ), + ( #4741, #12579, #5869 ), + ( #13684, #6993, #385 ), + ( #8146, #1479, #9273 ), + ( #2572, #10389, #3679 ), + ( #11526, #4792, #12624 ), + ( #5916, #13728, #7049 ), + ( #429, #8195, #1463 ), + ( #9258, #2559, #10375 ), + ( #3665, #11513, #4780 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.005286071154239274800, 0.007274071181770751200, 0.009262071209302228500, 0.01323807126436518300, 0.01423207127813092200, 0.01522607129189666000, 0.01721407131942813800, 0.01920207134695961500, 0.02119007137449109200, 0.02317807140202256900, 0.02516607142955404300, 0.02914207148461699800, 0.03311807153967995200, 0.03709407159474290700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7124524826746208000, 1.000000000000000000), + ( 1.000000000000000000, 0.7136336354709094100, 1.000000000000000000), + ( 1.000000000000000000, 0.7150281960523545700, 1.000000000000000000), + ( 1.000000000000000000, 0.7183657706360731000, 1.000000000000000000), + ( 1.000000000000000000, 0.7202879733960874100, 1.000000000000000000), + ( 1.000000000000000000, 0.7270037159963473900, 1.000000000000000000), + ( 1.000000000000000000, 0.7326612881345578900, 1.000000000000000000), + ( 1.000000000000000000, 0.7428954758584926900, 1.000000000000000000), + ( 1.000000000000000000, 0.7451080218550870700, 1.000000000000000000), + ( 1.000000000000000000, 0.7499415474725664700, 1.000000000000000000), + ( 1.000000000000000000, 0.7525707574035518400, 1.000000000000000000), + ( 1.000000000000000000, 0.7611262201847792700, 1.000000000000000000), + ( 1.000000000000000000, 0.7677391453467433700, 1.000000000000000000), + ( 1.000000000000000000, 0.7832128612553205200, 1.000000000000000000), + ( 1.000000000000000000, 0.7920943432027014500, 1.000000000000000000), + ( 1.000000000000000000, 0.8118161561886982900, 1.000000000000000000), + ( 1.000000000000000000, 0.8226343553759162300, 1.000000000000000000), + ( 1.000000000000000000, 0.8450883430136185700, 1.000000000000000000), + ( 1.000000000000000000, 0.8567498581518363500, 1.000000000000000000), + ( 1.000000000000000000, 0.8793576520600977500, 1.000000000000000000), + ( 1.000000000000000000, 0.8903452339141657600, 1.000000000000000000), + ( 1.000000000000000000, 0.9214914552196945600, 1.000000000000000000), + ( 1.000000000000000000, 0.9397946054278144600, 1.000000000000000000), + ( 1.000000000000000000, 0.9696078429284219500, 1.000000000000000000), + ( 1.000000000000000000, 0.9809614129672443700, 1.000000000000000000), + ( 1.000000000000000000, 0.9961754556867377100, 1.000000000000000000), + ( 1.000000000000000000, 1.000002345931368900, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#13715 = CARTESIAN_POINT ( 'NONE', ( 35.69449042159806900, -29.94048152596605300, 24.18974533536867400 ) ) ; +#13716 = ORIENTED_EDGE ( 'NONE', *, *, #12110, .T. ) ; +#13717 = CARTESIAN_POINT ( 'NONE', ( 5.445883568241820100, -20.46730387897269000, 17.03166182485543300 ) ) ; +#13718 = CARTESIAN_POINT ( 'NONE', ( 5.887803483839860500, -29.80362170919712000, 25.34458080121976700 ) ) ; +#13719 = CARTESIAN_POINT ( 'NONE', ( 29.78643196852883100, -23.91036369262085500, 17.66883328343049400 ) ) ; +#13720 = CARTESIAN_POINT ( 'NONE', ( 5.025888961519759100, -12.23676894503212500, -22.63718909890390000 ) ) ; +#13721 = CARTESIAN_POINT ( 'NONE', ( 17.19813696784037300, -97.51634637671223500, 22.06726462330451000 ) ) ; +#13722 = CARTESIAN_POINT ( 'NONE', ( 6.504119265815409900, -10.00000000000000000, -25.40970920795641800 ) ) ; +#13723 = CARTESIAN_POINT ( 'NONE', ( 3.100992373052450500, -29.44882463297534900, 22.53221437514313800 ) ) ; +#13724 = VERTEX_POINT ( 'NONE', #11799 ) ; +#13725 = CARTESIAN_POINT ( 'NONE', ( 31.26824676494396700, -30.69930046766888800, 27.02050077742864400 ) ) ; +#13726 = CARTESIAN_POINT ( 'NONE', ( 7.540236402684673300, -31.14771251655271900, 26.16346374705559100 ) ) ; +#13727 = CARTESIAN_POINT ( 'NONE', ( 37.44342195028227800, -29.70125492768323000, 21.90631719430640300 ) ) ; +#13728 = CARTESIAN_POINT ( 'NONE', ( 37.05572743939685400, -26.40272598591906600, 10.75713877450462000 ) ) ; +#13729 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#13730 = CARTESIAN_POINT ( 'NONE', ( 4.490573351556015800, -29.18952417731734200, 23.72290126136296400 ) ) ; +#13731 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13732 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -97.57595794165583000, 13.49305975241298600 ) ) ; +#13733 = CARTESIAN_POINT ( 'NONE', ( 9.887954477751126300, -10.80904320811203500, -24.99999999999999600 ) ) ; +#13734 = LINE ( 'NONE', #5820, #7825 ) ; +#13735 = CARTESIAN_POINT ( 'NONE', ( 29.91768642900235900, -17.00485776389807700, -26.23514541980045700 ) ) ; +#13736 = ADVANCED_FACE ( 'NONE', ( #4833 ), #4501, .T. ) ; +#13737 = CARTESIAN_POINT ( 'NONE', ( 9.042553161114161900, -29.00780592866318100, 27.50593561090062500 ) ) ; +#13738 = CARTESIAN_POINT ( 'NONE', ( 26.16863231096785800, -12.49999999999969300, -22.39187861805108800 ) ) ; +#13739 = VECTOR ( 'NONE', #4690, 1000.000000000000000 ) ; +#13740 = EDGE_LOOP ( 'NONE', ( #5421, #2499, #10898, #8253 ) ) ; +#13741 = CARTESIAN_POINT ( 'NONE', ( 32.38668705347143400, -23.56095657996224400, 15.17035819595997400 ) ) ; +#13742 = CARTESIAN_POINT ( 'NONE', ( 33.28522708448875300, -30.71419174262255000, 25.91364755699532200 ) ) ; +#13743 = CARTESIAN_POINT ( 'NONE', ( 11.16314369694489800, -30.82029249112741100, 27.90898455353669400 ) ) ; +#13744 = CARTESIAN_POINT ( 'NONE', ( 16.22675347039536900, -19.69368164125630100, 23.23577143885915300 ) ) ; +#13745 = CARTESIAN_POINT ( 'NONE', ( 15.06373787351401600, -12.49999999999999800, -12.55119451319227700 ) ) ; +#13746 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -22.50000000000000700, -11.97268808056956900 ) ) ; +#13747 = CARTESIAN_POINT ( 'NONE', ( 24.74900807111307800, -12.49999999999999500, -13.09873195543778500 ) ) ; +#13748 = EDGE_CURVE ( 'NONE', #2204, #10006, #12721, .T. ) ; +#13749 = CIRCLE ( 'NONE', #1470, 10.00000000000000000 ) ; +#13750 = CARTESIAN_POINT ( 'NONE', ( 15.53213677633195300, -21.82118531319243400, -26.98060824456523200 ) ) ; +#13751 = CARTESIAN_POINT ( 'NONE', ( 29.89118865126025800, -95.07596123493894400, 16.64488179593462300 ) ) ; +#13752 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#13753 = FACE_BOUND ( 'NONE', #3918, .T. ) ; +#13754 = CARTESIAN_POINT ( 'NONE', ( 34.16730295914231200, -19.49124422142049400, 17.72150307189685800 ) ) ; +#13755 = ORIENTED_EDGE ( 'NONE', *, *, #5944, .T. ) ; +#13756 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#13757 = CARTESIAN_POINT ( 'NONE', ( 9.329065726110512100, -30.77135446442650500, 27.26751174504288500 ) ) ; +#13758 = CARTESIAN_POINT ( 'NONE', ( 35.36772071592150000, -30.89879727758672000, 23.74208702049390900 ) ) ; +#13759 = CARTESIAN_POINT ( 'NONE', ( 17.50735423513288700, -27.96523496585093600, 27.45710953202296500 ) ) ; +#13760 = CARTESIAN_POINT ( 'NONE', ( 2.501479382294385700, -21.20981962300832900, 8.032314222208834000 ) ) ; +#13761 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -95.07596123493894400, 11.50239124669685100 ) ) ; +#13762 = CARTESIAN_POINT ( 'NONE', ( 6.199764220036246200, -31.05134253155865700, 25.25650468962098600 ) ) ; +#13763 = CARTESIAN_POINT ( 'NONE', ( 34.67926100356575600, -22.89371430377439200, 10.39082075623610500 ) ) ; +#13764 = CARTESIAN_POINT ( 'NONE', ( 7.078201777675098500, -10.00000000000000000, -24.10087060517139800 ) ) ; +#13765 = CARTESIAN_POINT ( 'NONE', ( 4.802305667509609900, -97.43723205496536400, 18.98004339479651400 ) ) ; +#13766 = CARTESIAN_POINT ( 'NONE', ( 14.56832700502117100, -20.42679231310006200, -26.58141254473663300 ) ) ; +#13767 = ORIENTED_EDGE ( 'NONE', *, *, #9140, .T. ) ; +#13768 = EDGE_CURVE ( 'NONE', #8117, #6977, #8503, .T. ) ; +#13769 = CARTESIAN_POINT ( 'NONE', ( 3.951758525968037900, -30.79435611421720200, 22.48849586565178900 ) ) ; +#13770 = CARTESIAN_POINT ( 'NONE', ( 31.24261234521149400, -31.06352397294323400, 26.89914956794921300 ) ) ; +#13771 = CARTESIAN_POINT ( 'NONE', ( 2.499999918618690300, -29.71061042947956200, 21.60901691940275500 ) ) ; +#13772 = CARTESIAN_POINT ( 'NONE', ( 7.456105175810466600, -30.58348367549630400, 26.40836378658295300 ) ) ; +#13773 = CARTESIAN_POINT ( 'NONE', ( 36.38192721632534400, -30.62042104446637900, 21.75534698526256200 ) ) ; +#13774 = ORIENTED_EDGE ( 'NONE', *, *, #1067, .F. ) ; +#13775 = CARTESIAN_POINT ( 'NONE', ( 22.42571990033179200, -33.35320614276258100, 26.50719967098535800 ) ) ; +#13776 = CARTESIAN_POINT ( 'NONE', ( 4.384759989676090300, -30.68063556253236300, 23.83146844064571100 ) ) ; +#13777 = CARTESIAN_POINT ( 'NONE', ( 30.51883984143063300, -8.548210740858847200, 25.00000000000000000 ) ) ; +#13778 = EDGE_LOOP ( 'NONE', ( #6519, #9493, #12257, #12976, #3645, #10040, #5774 ) ) ; +#13779 = CARTESIAN_POINT ( 'NONE', ( 9.623167387731983900, -11.97188369238805800, -25.00000000000117200 ) ) ; +#13780 = CARTESIAN_POINT ( 'NONE', ( 24.99999999999998600, -12.50000000000000500, -12.14030230067652400 ) ) ; +#13781 = CARTESIAN_POINT ( 'NONE', ( 24.74544293597306300, -17.79001048443216200, -26.37358902840715300 ) ) ; +#13782 = CARTESIAN_POINT ( 'NONE', ( 5.826407940439610300, -31.10889670283055300, 25.48554527845364200 ) ) ; +#13783 = CARTESIAN_POINT ( 'NONE', ( 23.19957495292257100, -12.50000000000002700, -14.44684229998057200 ) ) ; +#13784 = CARTESIAN_POINT ( 'NONE', ( 30.00810337248427500, -19.13900808240633500, 21.41060364011824600 ) ) ; +#13785 = EDGE_LOOP ( 'NONE', ( #6464, #2990, #3805, #967 ) ) ; +#13786 = CARTESIAN_POINT ( 'NONE', ( 34.03664355786540300, -12.50000000000108000, 14.52119600765166000 ) ) ; +#13787 = EDGE_CURVE ( 'NONE', #1640, #4566, #1570, .T. ) ; +#13788 = CARTESIAN_POINT ( 'NONE', ( 32.99098080849247300, -29.77194659727992800, 26.02797820513648800 ) ) ; +#13789 = CARTESIAN_POINT ( 'NONE', ( 3.644976528667714700, -32.95551158046192300, 11.57644568113577000 ) ) ; +#13790 = CARTESIAN_POINT ( 'NONE', ( 11.16271942411000100, -30.80699928245341500, 27.91120489798166200 ) ) ; +#13791 = CARTESIAN_POINT ( 'NONE', ( 17.73729912125423200, -19.94704501546481300, 23.24416148088638700 ) ) ; +#13792 = CARTESIAN_POINT ( 'NONE', ( 5.018405766049870200, -22.39047191582044900, -12.76088893022005500 ) ) ; +#13793 = CARTESIAN_POINT ( 'NONE', ( 33.73869148585595900, -21.73351360707802700, -17.47261148655002900 ) ) ; +#13794 = CARTESIAN_POINT ( 'NONE', ( 33.09462008651402700, -21.58013080850684800, -18.56985305827505800 ) ) ; +#13795 = ORIENTED_EDGE ( 'NONE', *, *, #4475, .T. ) ; +#13796 = CARTESIAN_POINT ( 'NONE', ( 22.45222723667158600, -25.57104309025308500, 22.25482204117849600 ) ) ; +#13797 = CARTESIAN_POINT ( 'NONE', ( 32.46436839405354400, -94.71799171676489900, 16.56571532149943200 ) ) ; +#13798 = CARTESIAN_POINT ( 'NONE', ( 29.93790168327469200, -30.57357293841841500, 27.57534056027664700 ) ) ; +#13799 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -99.99999999999998600, -26.47095103470434200 ) ) ; +#13800 = CARTESIAN_POINT ( 'NONE', ( 33.22311228221317900, -19.06757151301716700, 18.93951694965860000 ) ) ; +#13801 = ORIENTED_EDGE ( 'NONE', *, *, #12856, .T. ) ; +#13802 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#13803 = CARTESIAN_POINT ( 'NONE', ( 3.830115433849580000, -10.00000000000000000, -24.86121076501348900 ) ) ; +#13804 = CARTESIAN_POINT ( 'NONE', ( 9.338287390697209000, -30.45186900934954700, 27.30204854888081200 ) ) ; +#13805 = CARTESIAN_POINT ( 'NONE', ( 35.39853732194541200, -29.52682344854846600, 24.19723652709637200 ) ) ; +#13806 = CARTESIAN_POINT ( 'NONE', ( 2.201604286630126400, -18.80694826461782700, -11.70378783570185500 ) ) ; +#13807 = CARTESIAN_POINT ( 'NONE', ( 15.17775031417304500, -17.82373759102565100, 23.58476517323943300 ) ) ; +#13808 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6236, #13942, #736, #8519, #1837, #9646, #2938, #10780, #4048, #11887, #5162, #13002, #6289, #14100, #7430, #790, #8573, #1891, #9703, #2992 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002226100544389967100, 0.004452201088779934200, 0.005565251360974919500, 0.006678301633169904700, 0.008904402177559857900, 0.01335660326633976400, 0.01558270381072972800, 0.01669575408292472300, 0.01780880435511971900 ), + .UNSPECIFIED. ) ; +#13809 = ADVANCED_FACE ( 'NONE', ( #14112 ), #1350, .T. ) ; +#13810 = ORIENTED_EDGE ( 'NONE', *, *, #6394, .T. ) ; +#13811 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23105625617644100, 7.788262581895412300 ) ) ; +#13812 = CARTESIAN_POINT ( 'NONE', ( 37.49551767580206300, -90.35152065070485600, -3.700058326307321000 ) ) ; +#13813 = CARTESIAN_POINT ( 'NONE', ( 6.068565996193662200, -30.23166866494736400, 25.57867809178965100 ) ) ; +#13814 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.9848077530122092400, -0.1736481776669238900 ) ) ; +#13815 = CARTESIAN_POINT ( 'NONE', ( 10.49800057944463900, -23.93712305765181700, 17.85763256766175600 ) ) ; +#13816 = CARTESIAN_POINT ( 'NONE', ( 17.48569541438080700, -27.96569311826357000, 27.45698462486280200 ) ) ; +#13817 = CARTESIAN_POINT ( 'NONE', ( 2.499919635099569200, -20.02983397510544000, -12.58387565580928300 ) ) ; +#13818 = VERTEX_POINT ( 'NONE', #6361 ) ; +#13819 = CARTESIAN_POINT ( 'NONE', ( 3.079107383102430300, -29.84294074625476500, 22.70077218579039900 ) ) ; +#13820 = FACE_OUTER_BOUND ( 'NONE', #13192, .T. ) ; +#13821 = CARTESIAN_POINT ( 'NONE', ( 31.06956295614860900, -30.62008591544836400, 27.12293680682572000 ) ) ; +#13822 = CARTESIAN_POINT ( 'NONE', ( 2.715720694353966900, -18.71038707344373000, -15.76461880525361500 ) ) ; +#13823 = CARTESIAN_POINT ( 'NONE', ( 7.540009609683123900, -29.91893909958722000, 26.38052888414892300 ) ) ; +#13824 = CARTESIAN_POINT ( 'NONE', ( 37.15197365001464600, -29.37641582920834400, 22.11936804755298200 ) ) ; +#13825 = VERTEX_POINT ( 'NONE', #14169 ) ; +#13826 = AXIS2_PLACEMENT_3D ( 'NONE', #4629, #12461, #5745 ) ; +#13827 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13828 = CARTESIAN_POINT ( 'NONE', ( 4.384757013610519400, -29.55920851287588400, 24.02911172752805800 ) ) ; +#13829 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, 3.189999999999994200 ) ) ; +#13830 = ORIENTED_EDGE ( 'NONE', *, *, #10689, .T. ) ; +#13831 = CARTESIAN_POINT ( 'NONE', ( 33.23664003695829900, -18.54088238239223000, -22.82935076965022600 ) ) ; +#13832 = VECTOR ( 'NONE', #1720, 1000.000000000000000 ) ; +#13833 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -31.29513776008465000, 28.74509265499353800 ) ) ; +#13834 = CARTESIAN_POINT ( 'NONE', ( 26.04538610522840600, -21.30586202347200200, -26.63651348857843400 ) ) ; +#13835 = CARTESIAN_POINT ( 'NONE', ( 25.22493986281645900, -20.80526338704177300, -24.10089276524679400 ) ) ; +#13836 = EDGE_CURVE ( 'NONE', #11145, #4662, #8414, .T. ) ; +#13837 = CARTESIAN_POINT ( 'NONE', ( 37.30395786610103700, -18.90065418623639100, 11.77496680252640500 ) ) ; +#13838 = CARTESIAN_POINT ( 'NONE', ( 24.77405462483965700, -12.50000000000000200, 8.635268503169506000 ) ) ; +#13839 = CARTESIAN_POINT ( 'NONE', ( 33.11688500201263700, -30.53115427340219100, 26.09007987435912300 ) ) ; +#13840 = CARTESIAN_POINT ( 'NONE', ( 2.981787585730065500, -29.13501009258522600, 10.34245753971865500 ) ) ; +#13841 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345000300, 27.93780948130460100 ) ) ; +#13842 = PLANE ( 'NONE', #3915 ) ; +#13843 = CARTESIAN_POINT ( 'NONE', ( 23.32713525198293100, -20.76351822333076700, -24.39789867012038000 ) ) ; +#13844 = ORIENTED_EDGE ( 'NONE', *, *, #12961, .T. ) ; +#13845 = CARTESIAN_POINT ( 'NONE', ( 6.384846497565754400, -28.44416463842317100, 24.09292141866492900 ) ) ; +#13846 = CARTESIAN_POINT ( 'NONE', ( 4.179262562055551900, -10.00000000000000400, 22.36143813341286800 ) ) ; +#13847 = CARTESIAN_POINT ( 'NONE', ( 32.37335264189604800, -29.94097463670366100, 26.43320793166335400 ) ) ; +#13848 = CARTESIAN_POINT ( 'NONE', ( 9.191493342695373800, -99.99999999999998600, -35.18610464165195100 ) ) ; +#13849 = CARTESIAN_POINT ( 'NONE', ( 30.35108177915911700, -20.13814273986562900, 20.96925044265724500 ) ) ; +#13850 = VERTEX_POINT ( 'NONE', #12230 ) ; +#13851 = CARTESIAN_POINT ( 'NONE', ( 37.49641504723899700, -21.20208607985970400, 8.143946238466650600 ) ) ; +#13852 = CARTESIAN_POINT ( 'NONE', ( 9.633858419162866200, -30.89177798251063900, 27.36061427896529700 ) ) ; +#13853 = CARTESIAN_POINT ( 'NONE', ( 35.52338070653659900, -30.57289329449207200, 24.12246584831866200 ) ) ; +#13854 = CARTESIAN_POINT ( 'NONE', ( 17.56133793030465300, -30.66176281334875100, 28.85677374700785700 ) ) ; +#13855 = EDGE_CURVE ( 'NONE', #176, #11380, #7034, .T. ) ; +#13856 = CARTESIAN_POINT ( 'NONE', ( 34.11764223564094300, -97.45109860752859300, 19.51289579225713700 ) ) ; +#13857 = ORIENTED_EDGE ( 'NONE', *, *, #2165, .F. ) ; +#13858 = CARTESIAN_POINT ( 'NONE', ( 2.550914693199346900, -26.09070479555697000, 8.384425546482102500 ) ) ; +#13859 = CARTESIAN_POINT ( 'NONE', ( 32.38224002737945300, -7.937838028916963200, 25.00000000000000000 ) ) ; +#13860 = CARTESIAN_POINT ( 'NONE', ( 6.332025628662954400, -31.16495208383980800, 25.23845092968665300 ) ) ; +#13861 = CARTESIAN_POINT ( 'NONE', ( 39.99999026567407900, -9.999999999999943200, 7.921725561731213000 ) ) ; +#13862 = CARTESIAN_POINT ( 'NONE', ( 9.917475412070064800, -12.50000000000029300, 19.51004163439873200 ) ) ; +#13863 = CARTESIAN_POINT ( 'NONE', ( 13.62324996247521200, -16.20215066428740200, -15.93934038167531000 ) ) ; +#13864 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13865 = EDGE_LOOP ( 'NONE', ( #3224, #11628, #444, #12219 ) ) ; +#13866 = CARTESIAN_POINT ( 'NONE', ( 0.4734514014460455300, -11.89362202054003200, 8.032724119830358900 ) ) ; +#13867 = CARTESIAN_POINT ( 'NONE', ( 31.05176483179051800, -31.02063646943410200, 27.01170477231036000 ) ) ; +#13868 = CARTESIAN_POINT ( 'NONE', ( 14.45379610260038200, -27.29302298276749600, 21.64092526671720800 ) ) ; +#13869 = CARTESIAN_POINT ( 'NONE', ( 7.853101899561147000, -30.77117687173267400, 26.56523934147128300 ) ) ; +#13870 = CARTESIAN_POINT ( 'NONE', ( 36.59476581449857200, -30.54088516688997500, 21.92594988883283900 ) ) ; +#13871 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3096, #10987, #4253 ), + ( #12082, #5356, #13196 ), + ( #6486, #14286, #7625 ), + ( #974, #8763, #2071 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.01254176244748112500, 0.01753276859679564500 ), + ( 0.1698242776351450200, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9189223066719650600, 0.7612894503157423600, 1.000000000000000000), + ( 0.9189223066719650600, 0.7612894503157423600, 1.000000000000000000), + ( 0.9189223066719650600, 0.7612894503157423600, 1.000000000000000000), + ( 0.9189223066719650600, 0.7612894503157423600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#13872 = PLANE ( 'NONE', #5715 ) ; +#13873 = EDGE_CURVE ( 'NONE', #959, #5584, #8128, .T. ) ; +#13874 = CARTESIAN_POINT ( 'NONE', ( 4.694589940696451100, -30.96201385041750200, 23.67754975331373000 ) ) ; +#13875 = CARTESIAN_POINT ( 'NONE', ( 39.94246389723311100, -10.23014539706046800, -12.14017645427805700 ) ) ; +#13876 = CARTESIAN_POINT ( 'NONE', ( 23.16758450730819500, -19.29356167537636700, 23.36129432975305100 ) ) ; +#13877 = ORIENTED_EDGE ( 'NONE', *, *, #4148, .T. ) ; +#13878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#13879 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#13880 = ADVANCED_FACE ( 'NONE', ( #10122 ), #5050, .T. ) ; +#13881 = CARTESIAN_POINT ( 'NONE', ( 24.27330328569009100, -12.50000000000006900, -22.81486084861397500 ) ) ; +#13882 = CARTESIAN_POINT ( 'NONE', ( 37.38339101057601300, -28.34770938389136700, 15.55016074841215900 ) ) ; +#13883 = CARTESIAN_POINT ( 'NONE', ( 34.05190178197949500, -23.16164107808690900, 12.31150399630697300 ) ) ; +#13884 = CARTESIAN_POINT ( 'NONE', ( 32.99065562685736800, -31.16531489155026700, 25.78179138059405800 ) ) ; +#13885 = CARTESIAN_POINT ( 'NONE', ( 11.26586904076455700, -30.82654731345001100, 27.93780948130459400 ) ) ; +#13886 = CARTESIAN_POINT ( 'NONE', ( 33.87020068416111200, -22.04306740542962800, -21.83920133756410600 ) ) ; +#13887 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -95.78492122984184200, 4.330314668850203200 ) ) ; +#13888 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999999300, -29.69615506024420200, 21.52703644666151900 ) ) ; +#13889 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9332, #1539, #10452, #3743, #11582, #4846, #12687, #5981, #13784, #7106, #492, #8256, #1580, #9379, #2675, #10502, #3788, #11631, #4891, #12732, #6029, #13837, #7154, #538, #8309, #1627 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0002109663802684340200, 0.001653058908505473500, 0.003095151436742512800, 0.005979336493216594300, 0.007421429021453632500, 0.008863521549690670700, 0.01174770660616474200, 0.01318979913440177300, 0.01463189166263880600, 0.01751607671911286800, 0.01895816924734990500, 0.02040026177558694100, 0.02328444683206100400 ), + .UNSPECIFIED. ) ; +#13890 = ORIENTED_EDGE ( 'NONE', *, *, #4213, .T. ) ; +#13891 = CARTESIAN_POINT ( 'NONE', ( 34.59686735899152400, -29.33966666817141400, 24.67734989779553000 ) ) ; +#13892 = CARTESIAN_POINT ( 'NONE', ( 36.42420708895955500, -27.92562628259815900, 6.515931340162205200 ) ) ; +#13893 = CARTESIAN_POINT ( 'NONE', ( 29.05478467902204200, -19.76205230538382200, 21.75689031460914400 ) ) ; +#13894 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#13895 = CARTESIAN_POINT ( 'NONE', ( 32.80490024410697500, -20.29860232257389900, 19.05602651440216600 ) ) ; +#13896 = CARTESIAN_POINT ( 'NONE', ( 9.631719789574489700, -30.63014557683270700, 27.41240378751915700 ) ) ; +#13897 = CARTESIAN_POINT ( 'NONE', ( 35.16833832659829500, -29.22670822689794800, 24.08387947398038500 ) ) ; +#13898 = CARTESIAN_POINT ( 'NONE', ( 35.25112014919219000, -95.03089605088732100, 10.29465736413584600 ) ) ; +#13899 = CARTESIAN_POINT ( 'NONE', ( 26.66478708490393900, -94.74409437234406500, 18.35212678814792000 ) ) ; +#13900 = CARTESIAN_POINT ( 'NONE', ( 27.73212944968626900, -11.56884222450246500, 24.55881497293793800 ) ) ; +#13901 = CARTESIAN_POINT ( 'NONE', ( 8.152506944311877400, -20.62121261584592300, 19.81715663474115600 ) ) ; +#13902 = CARTESIAN_POINT ( 'NONE', ( 29.14085974117601600, -10.27921275622402000, 25.00000000000000400 ) ) ; +#13903 = CARTESIAN_POINT ( 'NONE', ( 6.149544999094979800, -30.45328563139594600, 25.61674579262989900 ) ) ; +#13904 = CARTESIAN_POINT ( 'NONE', ( 41.95188726012686000, -9.999999999999996400, 8.039215917497871900 ) ) ; +#13905 = CARTESIAN_POINT ( 'NONE', ( 16.45315676078128300, -12.49999999999999300, 9.906299557235412200 ) ) ; +#13906 = CARTESIAN_POINT ( 'NONE', ( -1.932206574704004700, -9.999999999999996400, 8.911379870854910100 ) ) ; +#13907 = CARTESIAN_POINT ( 'NONE', ( 30.96449582127629100, -30.48553883233089900, 27.17705697369206400 ) ) ; +#13908 = CARTESIAN_POINT ( 'NONE', ( 13.14325362619465000, -20.06323573008585000, 22.57599842844774000 ) ) ; +#13909 = CARTESIAN_POINT ( 'NONE', ( 7.883410413811710700, -30.15129830509565800, 26.61728547093602500 ) ) ; +#13910 = CARTESIAN_POINT ( 'NONE', ( 36.54743385735933000, -29.05243838663877700, 22.29672992547405400 ) ) ; +#13911 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5808, #8077, #11462, #4726, #12564, #5858 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.009839201723012093400, 0.01303669945511052800, 0.01623419718720896200 ), + .UNSPECIFIED. ) ; +#13912 = FACE_OUTER_BOUND ( 'NONE', #5938, .T. ) ; +#13913 = LINE ( 'NONE', #5045, #1912 ) ; +#13914 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000002100, -99.99999999999998600, 16.64915202258764300 ) ) ; +#13915 = ORIENTED_EDGE ( 'NONE', *, *, #5797, .F. ) ; +#13916 = CARTESIAN_POINT ( 'NONE', ( 4.294152427454216400, -29.98379699943891600, 24.19138544570563500 ) ) ; +#13917 = CARTESIAN_POINT ( 'NONE', ( 14.72714000081922200, -33.32768944524470100, 28.33792997631505600 ) ) ; +#13918 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#13919 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -17.49999999999999600 ) ) ; +#13920 = CARTESIAN_POINT ( 'NONE', ( 34.35586862908939300, -100.0000000000000100, -2.045551259989163700 ) ) ; +#13921 = CARTESIAN_POINT ( 'NONE', ( 29.55517467779908000, -30.85074090160856700, 27.67360220639884700 ) ) ; +#13922 = CARTESIAN_POINT ( 'NONE', ( 34.72463899874274800, -100.0000000000000700, 18.75674221518472600 ) ) ; +#13923 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#13924 = CARTESIAN_POINT ( 'NONE', ( 22.51430408885893500, -27.96569310774430800, 27.45698462770375400 ) ) ; +#13925 = AXIS2_PLACEMENT_3D ( 'NONE', #12877, #12826, #13971 ) ; +#13926 = CARTESIAN_POINT ( 'NONE', ( 22.58385625109601200, -12.50000000000000200, -14.54982114499995800 ) ) ; +#13927 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, 51.02052347080197600, 33.25956466485612100 ) ) ; +#13928 = CIRCLE ( 'NONE', #3384, 1.200000000000013500 ) ; +#13929 = CARTESIAN_POINT ( 'NONE', ( 34.83167825260079600, -12.50000000000233100, 12.06212892481511500 ) ) ; +#13930 = CARTESIAN_POINT ( 'NONE', ( 33.01600403172781000, -30.36853471045936100, 26.16519788589315000 ) ) ; +#13931 = CARTESIAN_POINT ( 'NONE', ( 2.499999989297200900, -21.23105625617693100, -11.53187062879838500 ) ) ; +#13932 = VERTEX_POINT ( 'NONE', #11357 ) ; +#13933 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13934 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 8.699345542647773000, 20.22358027453075700 ) ) ; +#13935 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#13936 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.57596123493894400, 10.85284821673505300 ) ) ; +#13937 = EDGE_CURVE ( 'NONE', #6970, #2269, #897, .T. ) ; +#13938 = DIRECTION ( 'NONE', ( 1.470273635576807600E-014, -0.01862984900629865000, 0.9998264493030790700 ) ) ; +#13939 = CARTESIAN_POINT ( 'NONE', ( 35.49768826271314700, -29.11858271560210200, 23.63926296971792200 ) ) ; +#13940 = CARTESIAN_POINT ( 'NONE', ( 11.74839048014312600, -10.50987376043048400, 24.88091719461935000 ) ) ; +#13941 = CARTESIAN_POINT ( 'NONE', ( 27.70063018951043100, -19.44626871326508800, 22.41274666735192900 ) ) ; +#13942 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992900, -97.57596123493897300, 10.74918630130060000 ) ) ; +#13943 = APPROVAL ( #9008, 'UNSPECIFIED' ) ; +#13944 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427512300E-016, -12.50000000000001600, 25.00105000000003800 ) ) ; +#13945 = CARTESIAN_POINT ( 'NONE', ( 9.837932442931615300, -30.95620829798353300, 27.42109574978227500 ) ) ; +#13946 = CARTESIAN_POINT ( 'NONE', ( 35.60228063485691100, -30.27402208073118900, 24.28293803248464000 ) ) ; +#13947 = VERTEX_POINT ( 'NONE', #10229 ) ; +#13948 = AXIS2_PLACEMENT_3D ( 'NONE', #12923, #6216, #14022 ) ; +#13949 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -96.37138356748280900, 5.695220015075978600 ) ) ; +#13950 = CARTESIAN_POINT ( 'NONE', ( 22.49999999991694500, -93.17319105032915200, 22.83432234620769200 ) ) ; +#13951 = ADVANCED_FACE ( 'NONE', ( #4168, #1925, #10464, #7496 ), #5744, .F. ) ; +#13952 = CARTESIAN_POINT ( 'NONE', ( 14.32055859379472000, -19.99632002456519000, 22.89506180126159100 ) ) ; +#13953 = CARTESIAN_POINT ( 'NONE', ( 6.331547627207339000, -29.58660162945345500, 25.51743133766308000 ) ) ; +#13954 = EDGE_LOOP ( 'NONE', ( #12325, #1958, #1091, #4715 ) ) ; +#13955 = CARTESIAN_POINT ( 'NONE', ( 39.50952898500422400, -11.89253977969671500, 8.798920177677183900 ) ) ; +#13956 = CARTESIAN_POINT ( 'NONE', ( 12.78971403120460500, -24.10785594680935200, 19.07398828597311900 ) ) ; +#13957 = EDGE_CURVE ( 'NONE', #12584, #5650, #13406, .T. ) ; +#13958 = CARTESIAN_POINT ( 'NONE', ( 0.2762959778152933600, -9.999999999998159700, 11.18651245966350600 ) ) ; +#13959 = ORIENTED_EDGE ( 'NONE', *, *, #13499, .F. ) ; +#13960 = CARTESIAN_POINT ( 'NONE', ( 30.96449697920098700, -30.88678173388751000, 27.10630935518991100 ) ) ; +#13961 = CARTESIAN_POINT ( 'NONE', ( 6.107617042730766800, -28.81132272559662200, 25.26869500259613600 ) ) ; +#13962 = CARTESIAN_POINT ( 'NONE', ( 8.072959386507271500, -31.00476852467254600, 26.57498546634871100 ) ) ; +#13963 = CARTESIAN_POINT ( 'NONE', ( 37.09252062943999600, -30.21883442416432100, 22.07981113692547500 ) ) ; +#13964 = VERTEX_POINT ( 'NONE', #12460 ) ; +#13965 = CARTESIAN_POINT ( 'NONE', ( 0.1720427470343934000, -7.500000000000000000, 21.30031871613724800 ) ) ; +#13966 = AXIS2_PLACEMENT_3D ( 'NONE', #6376, #14182, #7511 ) ; +#13967 = CARTESIAN_POINT ( 'NONE', ( 4.833134861422658800, -31.02743952761184000, 23.72857580685067800 ) ) ; +#13968 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4444, #12271, #13378, #6683, #86, #7823, #1177, #8961, #2261, #10089, #3370, #11216, #4485, #12320, #5595, #13425, #6732, #135, #7870, #1220, #9010, #2307, #10134, #3420, #11262, #4532, #12362, #5646 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( -2.461485983590633800E-005, 0.003289411205405993300, 0.004946424238026942400, 0.006603437270647883600, 0.009917463335889767000, 0.01074596985220024500, 0.01157447636851072200, 0.01323148940113167600, 0.01488850243375262900, 0.01654551546637357900, 0.01985954153161548200, 0.02151655456423643200, 0.02317356759685738200, 0.02648759366209928200 ), + .UNSPECIFIED. ) ; +#13969 = CARTESIAN_POINT ( 'NONE', ( 11.94628006383273600, -38.87386673017140000, 18.82874935303465600 ) ) ; +#13970 = CARTESIAN_POINT ( 'NONE', ( 41.52655397346299500, -95.07596123493894400, 2.049002866222572100 ) ) ; +#13971 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13972 = CARTESIAN_POINT ( 'NONE', ( 31.66939331951960300, -22.03500000000001400, 16.30903188394326600 ) ) ; +#13973 = CARTESIAN_POINT ( 'NONE', ( 29.24840912373833400, -30.72986557447607200, 27.79582208740507800 ) ) ; +#13974 = CARTESIAN_POINT ( 'NONE', ( 28.35894844889568500, -97.40649683660852500, 21.45510512356155500 ) ) ; +#13975 = CARTESIAN_POINT ( 'NONE', ( 26.29971832929048900, -30.75177505912700600, 28.52778852917187900 ) ) ; +#13976 = ORIENTED_EDGE ( 'NONE', *, *, #9913, .F. ) ; +#13977 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000900, 17.50000000000000400 ) ) ; +#13978 = CARTESIAN_POINT ( 'NONE', ( 34.99999999999999300, -99.99999999999998600, -25.63802908547507900 ) ) ; +#13979 = CARTESIAN_POINT ( 'NONE', ( 24.88266222659557100, -12.50000000000002000, 8.344656887230383900 ) ) ; +#13980 = EDGE_CURVE ( 'NONE', #8803, #2710, #13078, .T. ) ; +#13981 = CARTESIAN_POINT ( 'NONE', ( 32.93537822612766100, -31.05830820431361500, 25.91618071278567800 ) ) ; +#13982 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#13983 = VERTEX_POINT ( 'NONE', #5798 ) ; +#13984 = CARTESIAN_POINT ( 'NONE', ( 28.91494291477927400, -9.876651572008158900, -24.99999999999999600 ) ) ; +#13985 = CARTESIAN_POINT ( 'NONE', ( 17.16851674833617000, -12.50000000000002000, -14.52753471994219400 ) ) ; +#13986 = CARTESIAN_POINT ( 'NONE', ( 15.83053428138617800, -18.71137370768152100, 23.44159353176399900 ) ) ; +#13987 = CARTESIAN_POINT ( 'NONE', ( 36.16983293334568800, -28.96227369567788300, 22.56464019879388900 ) ) ; +#13988 = CARTESIAN_POINT ( 'NONE', ( 4.799347705547351200, -100.0000000000000000, 18.50376388382413100 ) ) ; +#13989 = ORIENTED_EDGE ( 'NONE', *, *, #13687, .T. ) ; +#13990 = CARTESIAN_POINT ( 'NONE', ( 26.28432970041254900, -19.17234554651557600, 22.93521054189044200 ) ) ; +#13991 = CARTESIAN_POINT ( 'NONE', ( 16.81034970628410400, -12.50000000000004600, 10.04162936055850300 ) ) ; +#13992 = CARTESIAN_POINT ( 'NONE', ( 0.06266670377438471300, -9.958582620565815400, 20.89421597306710500 ) ) ; +#13993 = CARTESIAN_POINT ( 'NONE', ( 2.201333471057854500, -18.80676533099966000, -11.58957846345420600 ) ) ; +#13994 = CARTESIAN_POINT ( 'NONE', ( 9.832856217471487500, -30.72703720562262200, 27.47707708259223100 ) ) ; +#13995 = CARTESIAN_POINT ( 'NONE', ( 35.14956338143910100, -31.03053946413702100, 23.74918929040860100 ) ) ; +#13996 = CARTESIAN_POINT ( 'NONE', ( 7.588494525687572400, -12.49999999999984500, 17.21747280504099500 ) ) ; +#13997 = VERTEX_POINT ( 'NONE', #11403 ) ; +#13998 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999997900, -93.59664222890734200, 2.266305945995898500 ) ) ; +#13999 = CARTESIAN_POINT ( 'NONE', ( 2.231891938245103500, -18.83089491994434900, 8.844282624720465300 ) ) ; +#14000 = CARTESIAN_POINT ( 'NONE', ( 2.499534837295337200, -20.40995557581467800, 7.829897688259403100 ) ) ; +#14001 = CARTESIAN_POINT ( 'NONE', ( 31.19499392673794300, -28.26664598199273800, 25.47461412261451100 ) ) ; +#14002 = CARTESIAN_POINT ( 'NONE', ( 6.352637486683060600, -30.69205613093057000, 25.66960466826137100 ) ) ; +#14003 = CARTESIAN_POINT ( 'NONE', ( 37.28425610165670900, -18.71038484437335100, -15.76471174071776300 ) ) ; +#14004 = CARTESIAN_POINT ( 'NONE', ( 39.72369845522253900, -9.999999999997703200, 11.18654461018644500 ) ) ; +#14005 = EDGE_LOOP ( 'NONE', ( #359, #5220, #4706, #8213 ) ) ; +#14006 = CARTESIAN_POINT ( 'NONE', ( 12.71397840112438400, -12.50000000000061300, 21.11212968055706100 ) ) ; +#14007 = CARTESIAN_POINT ( 'NONE', ( 28.77023029672657000, -30.65936817474672100, 27.95672663490805100 ) ) ; +#14008 = CARTESIAN_POINT ( 'NONE', ( 1.594919006604098400, -11.88572409520862100, 14.23478772069254800 ) ) ; +#14009 = CYLINDRICAL_SURFACE ( 'NONE', #661, 1.200000000000007500 ) ; +#14010 = ORIENTED_EDGE ( 'NONE', *, *, #13687, .F. ) ; +#14011 = CARTESIAN_POINT ( 'NONE', ( 30.75820189801474000, -30.39943970540187500, 27.26135220016124400 ) ) ; +#14012 = CARTESIAN_POINT ( 'NONE', ( 8.689964964383779700, -27.02107463352843900, 19.16186779866176700 ) ) ; +#14013 = CARTESIAN_POINT ( 'NONE', ( 8.047843705761453100, -30.43608754544684600, 26.72504070380353300 ) ) ; +#14014 = CARTESIAN_POINT ( 'NONE', ( 36.14950630815324200, -28.97030664695426000, 22.62226483842436800 ) ) ; +#14015 = AXIS2_PLACEMENT_3D ( 'NONE', #573, #6066, #1669 ) ; +#14016 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #5849, #12555, #361, #8119, #1449, #9246, #2546, #10362, #3652, #11498 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001065464361979366300, 0.002130928723958732600, 0.003196393085938099100, 0.004261857447917465200 ), + .UNSPECIFIED. ) ; +#14017 = CARTESIAN_POINT ( 'NONE', ( 4.345532425023756100, -94.75143542371363000, 8.444143851989579700 ) ) ; +#14018 = VERTEX_POINT ( 'NONE', #13606 ) ; +#14019 = CARTESIAN_POINT ( 'NONE', ( 4.377672810643618500, -30.27055553877260200, 24.26212304115398400 ) ) ; +#14020 = CARTESIAN_POINT ( 'NONE', ( 10.45513779289695400, -31.59160329850934400, 19.44972132372792500 ) ) ; +#14021 = CARTESIAN_POINT ( 'NONE', ( 33.35896063566995900, -95.07596123493895800, 5.345650428365669200 ) ) ; +#14022 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14023 = CARTESIAN_POINT ( 'NONE', ( 27.70916246864324600, -100.0000000000000100, 5.479840347243296600 ) ) ; +#14024 = CARTESIAN_POINT ( 'NONE', ( 29.24731949158463000, -30.81190265739571600, 27.78313444800776800 ) ) ; +#14025 = CARTESIAN_POINT ( 'NONE', ( 0.002739849957502309600, -12.50000000000397200, -20.16550224408142700 ) ) ; +#14026 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000000, 7.000000000000000900, 17.50000000000000400 ) ) ; +#14027 = ADVANCED_FACE ( 'NONE', ( #13412 ), #6933, .F. ) ; +#14028 = CARTESIAN_POINT ( 'NONE', ( 25.54572538076692500, -30.73239406695513400, 28.64853081869410200 ) ) ; +#14029 = ORIENTED_EDGE ( 'NONE', *, *, #6842, .T. ) ; +#14030 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -94.74682992296695300, 18.71443453778783800 ) ) ; +#14031 = EDGE_CURVE ( 'NONE', #2027, #11515, #14016, .T. ) ; +#14032 = CARTESIAN_POINT ( 'NONE', ( 2.719877556254279800, -30.10938553870119700, 21.53870204212903900 ) ) ; +#14033 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -20.28809933266904900, -12.41559226350134500 ) ) ; +#14034 = CARTESIAN_POINT ( 'NONE', ( 34.66595655563203600, -22.89785209198169400, 10.41972561323036800 ) ) ; +#14035 = CARTESIAN_POINT ( 'NONE', ( 32.69226988065502600, -30.11559305233985700, 26.31168897810346500 ) ) ; +#14036 = CARTESIAN_POINT ( 'NONE', ( 29.56029715595466100, -10.84435148005987600, -25.04158582061091900 ) ) ; +#14037 = CARTESIAN_POINT ( 'NONE', ( 13.57912756543971800, -20.85143036383235000, -23.77292099644920500 ) ) ; +#14038 = AXIS2_PLACEMENT_3D ( 'NONE', #12725, #11623, #4885 ) ; +#14039 = CARTESIAN_POINT ( 'NONE', ( 12.58359595370156500, -11.87724389807649700, 24.55522993379389300 ) ) ; +#14040 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#14041 = DIRECTION ( 'NONE', ( 7.103262821921560300E-016, -3.469446951953615700E-016, 1.000000000000000000 ) ) ; +#14042 = ORIENTED_EDGE ( 'NONE', *, *, #12243, .T. ) ; +#14043 = CARTESIAN_POINT ( 'NONE', ( 24.26989118410109800, -19.95543307290942900, 23.14678868621694700 ) ) ; +#14044 = CARTESIAN_POINT ( 'NONE', ( 15.08346086314391800, -24.20358730392689800, 19.75579178443181000 ) ) ; +#14045 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, 12.00000000000000000, 20.00000000000000400 ) ) ; +#14046 = CARTESIAN_POINT ( 'NONE', ( 9.838212051714384300, -30.52173408917437700, 27.49687181787893000 ) ) ; +#14047 = CARTESIAN_POINT ( 'NONE', ( 35.42777031498228300, -30.03966726399870900, 24.47788949281803300 ) ) ; +#14048 = CARTESIAN_POINT ( 'NONE', ( 15.77655168884400200, -12.50000000000003400, 9.431311695852780700 ) ) ; +#14049 = ORIENTED_EDGE ( 'NONE', *, *, #5178, .F. ) ; +#14050 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -90.07596123493894400, -4.350951650170427100 ) ) ; +#14051 = EDGE_CURVE ( 'NONE', #3039, #90, #13569, .T. ) ; +#14052 = CARTESIAN_POINT ( 'NONE', ( 5.972212279750707800, -19.05388605412798600, 18.07735453785904400 ) ) ; +#14053 = CARTESIAN_POINT ( 'NONE', ( 2.500407169404055700, -21.22226134358179900, 7.903138237773943000 ) ) ; +#14054 = CARTESIAN_POINT ( 'NONE', ( 39.38078556866245300, -11.89051192903888500, 10.29599027153722400 ) ) ; +#14055 = CARTESIAN_POINT ( 'NONE', ( 6.436836260344986900, -29.81566595308622100, 25.70316449484063500 ) ) ; +#14056 = CARTESIAN_POINT ( 'NONE', ( 9.435083275373699500, -16.56984214946495400, -26.15844042994632100 ) ) ; +#14057 = FACE_OUTER_BOUND ( 'NONE', #3237, .T. ) ; +#14058 = CARTESIAN_POINT ( 'NONE', ( 40.67325033572055300, -9.999999999999996400, 15.09755997024700300 ) ) ; +#14059 = CARTESIAN_POINT ( 'NONE', ( 16.43119947697349700, -19.09656950022996800, 23.39602936521978500 ) ) ; +#14060 = CARTESIAN_POINT ( 'NONE', ( 16.78062900478945400, -12.50000000000000400, 10.03260769841646600 ) ) ; +#14061 = CARTESIAN_POINT ( 'NONE', ( 34.97007046443898300, -12.23715663711430300, -22.64041776899938800 ) ) ; +#14062 = AXIS2_PLACEMENT_3D ( 'NONE', #10813, #4082, #11918 ) ; +#14063 = CARTESIAN_POINT ( 'NONE', ( 3.454449386481892100, -21.67294232705996700, -17.19673707642925500 ) ) ; +#14064 = CARTESIAN_POINT ( 'NONE', ( 3.182925348281318500, -10.00000000000000400, 21.38189353139380000 ) ) ; +#14065 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#14066 = EDGE_LOOP ( 'NONE', ( #2842, #4823, #5031, #5234, #5384, #5431, #7662, #5897, #6235, #6487 ) ) ; +#14067 = CARTESIAN_POINT ( 'NONE', ( 30.77123976044912400, -30.75507894686571200, 27.22908636099891300 ) ) ; +#14068 = CARTESIAN_POINT ( 'NONE', ( 5.955421874402398800, -21.29323942038989200, 17.51184880315652100 ) ) ; +#14069 = CARTESIAN_POINT ( 'NONE', ( 8.374165930074356700, -31.09359664276374600, 26.68633790689379700 ) ) ; +#14070 = CARTESIAN_POINT ( 'NONE', ( 37.09794603324977700, -29.92128962015112800, 22.45516793605383700 ) ) ; +#14071 = CARTESIAN_POINT ( 'NONE', ( 2.500000000002835100, -94.82601771543569700, 5.941839880700322300 ) ) ; +#14072 = EDGE_CURVE ( 'NONE', #7302, #9976, #2953, .T. ) ; +#14073 = CARTESIAN_POINT ( 'NONE', ( 4.814210913195861300, -29.22254166753162600, 24.06346874096871600 ) ) ; +#14074 = CARTESIAN_POINT ( 'NONE', ( 4.204740917569785600, -31.00544597194038600, 22.72000988593178400 ) ) ; +#14075 = CARTESIAN_POINT ( 'NONE', ( 29.18445376637405500, -89.29659766701465200, 9.458710949951301600 ) ) ; +#14076 = CARTESIAN_POINT ( 'NONE', ( 9.672239694707583400E-014, -9.934657147099521500, 14.20251777369160200 ) ) ; +#14077 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, 7.000000000000000000, 1.200000000000007500 ) ) ; +#14078 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #6134, #5006, #5057 ), + ( #12898, #6187, #13993 ), + ( #7314, #688, #8467 ), + ( #1784, #9590, #2885 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -1.649750478604499000E-006, 0.0002729825698169186500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9925030584325749100, 1.000000000000000000), + ( 1.000000000000000000, 0.9925108205622219500, 1.000000000000000000), + ( 1.000000000000000000, 0.9925139280306857200, 1.000000000000000000), + ( 1.000000000000000000, 0.9925120726376612800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#14079 = CARTESIAN_POINT ( 'NONE', ( 29.14591652045563600, -30.74576891135597400, 27.82619830748863200 ) ) ; +#14080 = CARTESIAN_POINT ( 'NONE', ( 26.69742577891321700, -100.0000000000000300, 21.31254701124335300 ) ) ; +#14081 = CARTESIAN_POINT ( 'NONE', ( 27.18477285430466100, -28.88618851952478300, 28.67212719728811300 ) ) ; +#14082 = CARTESIAN_POINT ( 'NONE', ( 39.55381498709625300, -11.78474005161496600, 8.289991586311693100 ) ) ; +#14083 = ORIENTED_EDGE ( 'NONE', *, *, #12404, .F. ) ; +#14084 = CARTESIAN_POINT ( 'NONE', ( 36.20251699548725100, -30.72546301401537900, 22.18650270400278000 ) ) ; +#14085 = CARTESIAN_POINT ( 'NONE', ( 3.278371505256989900, -28.98403232083595400, 21.73713214224514400 ) ) ; +#14086 = CARTESIAN_POINT ( 'NONE', ( 6.245297715500232300, -100.0000000000000300, -31.23924336750124600 ) ) ; +#14087 = CARTESIAN_POINT ( 'NONE', ( 35.12683710072538900, -12.49999999999814000, 9.601143172627329700 ) ) ; +#14088 = CARTESIAN_POINT ( 'NONE', ( 32.71785434411050600, -30.79229560809504600, 26.23504698742349100 ) ) ; +#14089 = CARTESIAN_POINT ( 'NONE', ( 2.597274549038302000, -21.39632937724438100, -13.77384625790435600 ) ) ; +#14090 = CARTESIAN_POINT ( 'NONE', ( 30.20609857391463000, -11.52073648657233600, -24.99999999999999600 ) ) ; +#14091 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999997300, -7.520606794341282400, 25.00000000000000000 ) ) ; +#14092 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000700, 51.02052347080197600, 26.62899292861733600 ) ) ; +#14093 = CARTESIAN_POINT ( 'NONE', ( 13.31454196593808500, -12.50000000000002100, -22.22006969961719500 ) ) ; +#14094 = CIRCLE ( 'NONE', #4312, 1.200000000000010200 ) ; +#14095 = CARTESIAN_POINT ( 'NONE', ( 5.793375227673259100, -10.20257761146393300, -25.00000000000000400 ) ) ; +#14096 = CIRCLE ( 'NONE', #700, 2.499999999999998200 ) ; +#14097 = CARTESIAN_POINT ( 'NONE', ( 22.76532849935092200, -19.69054736339283500, 23.29748540682778600 ) ) ; +#14098 = CARTESIAN_POINT ( 'NONE', ( 15.52122161851760400, -12.49999999999990400, 21.90453796498440700 ) ) ; +#14099 = ORIENTED_EDGE ( 'NONE', *, *, #5249, .F. ) ; +#14100 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999991600, -92.30125013851262800, -1.362989883637486700 ) ) ; +#14101 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 9.500000000000000000, -19.48143887112369700 ) ) ; +#14102 = CARTESIAN_POINT ( 'NONE', ( 10.23991035109450100, -30.79490330319202200, 27.61376712978130500 ) ) ; +#14103 = CARTESIAN_POINT ( 'NONE', ( 35.05976377930869600, -31.00229221403319700, 23.96603116331035800 ) ) ; +#14104 = CARTESIAN_POINT ( 'NONE', ( 9.511504369887697800, -23.83393358620204000, 17.12157956675336100 ) ) ; +#14105 = CARTESIAN_POINT ( 'NONE', ( 16.33707368133799800, -19.18949841699703600, 23.36467695346054900 ) ) ; +#14106 = ADVANCED_FACE ( 'NONE', ( #1058 ), #1451, .F. ) ; +#14107 = CARTESIAN_POINT ( 'NONE', ( 2.198602935806730900, -18.79499429151693900, 7.983471378938436800 ) ) ; +#14108 = CARTESIAN_POINT ( 'NONE', ( 31.54980353542447000, -11.87833224407951600, 22.67547125388047000 ) ) ; +#14109 = CARTESIAN_POINT ( 'NONE', ( 6.522624212700450600, -31.01346172565529700, 25.55836166472729000 ) ) ; +#14110 = CARTESIAN_POINT ( 'NONE', ( 4.859163353066981500, -9.852061065451032100, 25.00000000000000400 ) ) ; +#14111 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12293, #5569, #6705, #105 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.004389355265935998200, 0.006752347140196591000 ), + .UNSPECIFIED. ) ; +#14112 = FACE_OUTER_BOUND ( 'NONE', #8071, .T. ) ; +#14113 = CARTESIAN_POINT ( 'NONE', ( 35.02259274391751400, -11.88044553291982400, 19.75003728622713300 ) ) ; +#14114 = AXIS2_PLACEMENT_3D ( 'NONE', #2721, #10549, #3828 ) ; +#14115 = CIRCLE ( 'NONE', #1042, 2.499999999999999100 ) ; +#14116 = DIRECTION ( 'NONE', ( -0.01900744305030713600, 0.9998193422357306600, 0.0000000000000000000 ) ) ; +#14117 = CARTESIAN_POINT ( 'NONE', ( 39.84579250361465300, -10.61682998554135800, 11.04026341168288600 ) ) ; +#14118 = ORIENTED_EDGE ( 'NONE', *, *, #6574, .T. ) ; +#14119 = CARTESIAN_POINT ( 'NONE', ( 5.727433202849133500, -20.26494514622815400, -21.03330422253893100 ) ) ; +#14120 = CARTESIAN_POINT ( 'NONE', ( 7.089610946905798600, -10.00000000000092700, 22.29715979237180100 ) ) ; +#14121 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999992900, -97.57596123493894400, 11.50239124669685600 ) ) ; +#14122 = CARTESIAN_POINT ( 'NONE', ( 30.65783862822788200, -30.39965818195012300, 27.30211301537511300 ) ) ; +#14123 = CARTESIAN_POINT ( 'NONE', ( 2.717288326520789000, -28.56885198389268900, 17.40315499756038500 ) ) ; +#14124 = CARTESIAN_POINT ( 'NONE', ( 8.336870727528213000, -30.61417882614137700, 26.84922939930443100 ) ) ; +#14125 = CARTESIAN_POINT ( 'NONE', ( 36.14777090224715300, -30.75355599062696400, 22.30849377393484200 ) ) ; +#14126 = EDGE_CURVE ( 'NONE', #11145, #10169, #5351, .T. ) ; +#14127 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992500, -93.58403201387045600, 0.4683135298483800400 ) ) ; +#14128 = CARTESIAN_POINT ( 'NONE', ( 4.495766833586512400, -30.57562929147207600, 24.14286147596746800 ) ) ; +#14129 = CARTESIAN_POINT ( 'NONE', ( 4.984468725724211100, -35.20455389412739300, 13.73440247329220100 ) ) ; +#14130 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000001100, -95.07596123493894400, 15.95758058754438700 ) ) ; +#14131 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.549038686456006200, 19.10346724692294300 ) ) ; +#14132 = EDGE_LOOP ( 'NONE', ( #3094, #5634, #9265, #10996, #8458, #11678 ) ) ; +#14133 = CARTESIAN_POINT ( 'NONE', ( 11.03381150257415500, -9.895584009834973200, -25.00000000000000400 ) ) ; +#14134 = CARTESIAN_POINT ( 'NONE', ( 29.14466200400329400, -30.80038280920576100, 27.81800273471688100 ) ) ; +#14135 = CARTESIAN_POINT ( 'NONE', ( 37.69993839972192300, -18.75814849665750100, -13.76385932181580600 ) ) ; +#14136 = CARTESIAN_POINT ( 'NONE', ( 25.65747769832777400, -28.84505725442456400, 29.00766805662613000 ) ) ; +#14137 = CARTESIAN_POINT ( 'NONE', ( 11.31186559264341100, -11.14063917059260900, 24.45614895767105800 ) ) ; +#14138 = CARTESIAN_POINT ( 'NONE', ( 35.38768591399330200, -30.98443047507447900, 23.45465958539280400 ) ) ; +#14139 = CARTESIAN_POINT ( 'NONE', ( 3.285879777903740100, -30.45224796363785600, 21.54625807092234200 ) ) ; +#14140 = CARTESIAN_POINT ( 'NONE', ( 9.818323438264403800, -20.28809933266904900, -21.66107231272593800 ) ) ; +#14141 = ORIENTED_EDGE ( 'NONE', *, *, #7128, .T. ) ; +#14142 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000000, -12.50000000000000500, 7.564513562858103900 ) ) ; +#14143 = CARTESIAN_POINT ( 'NONE', ( 32.46332960296729900, -29.93520893118787300, 26.38375427115277800 ) ) ; +#14144 = CARTESIAN_POINT ( 'NONE', ( 8.737276824478932700, -10.52972867047345100, 23.84580192386288300 ) ) ; +#14145 = CARTESIAN_POINT ( 'NONE', ( 0.3226449443118326000, -11.29057977724726300, 9.738761650130676600 ) ) ; +#14146 = CARTESIAN_POINT ( 'NONE', ( 16.39938148918662400, -12.50000000000000000, -14.28663765766752300 ) ) ; +#14147 = CARTESIAN_POINT ( 'NONE', ( 2.949272561468384300, -89.85744524174053500, -0.4790332503554191600 ) ) ; +#14148 = ORIENTED_EDGE ( 'NONE', *, *, #6971, .F. ) ; +#14149 = EDGE_CURVE ( 'NONE', #11380, #959, #10111, .T. ) ; +#14150 = CARTESIAN_POINT ( 'NONE', ( 14.05203174603082200, -14.97547355477099500, 24.12268977050289100 ) ) ; +#14151 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 0.0000000000000000000 ) ) ; +#14152 = CARTESIAN_POINT ( 'NONE', ( 13.58788196514794100, -89.23582230748378700, 10.53559886736125900 ) ) ; +#14153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#14154 = EDGE_LOOP ( 'NONE', ( #9164, #1692, #5335, #7963 ) ) ; +#14155 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -12.50000000000000900, 10.14164662228683300 ) ) ; +#14156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14157 = CARTESIAN_POINT ( 'NONE', ( 13.34361952897840800, -13.92587269297719200, -25.69223727859844100 ) ) ; +#14158 = CARTESIAN_POINT ( 'NONE', ( 10.24067707895889100, -30.62652863517321900, 27.63684774617537300 ) ) ; +#14159 = CARTESIAN_POINT ( 'NONE', ( 35.13367852542553000, -29.67643267621372200, 24.53966029194801400 ) ) ; +#14160 = CARTESIAN_POINT ( 'NONE', ( 15.12120437084100500, -19.95261139594173000, 23.09788069710842300 ) ) ; +#14161 = CARTESIAN_POINT ( 'NONE', ( 7.171394245784894900, -28.37820280459871800, 24.59181513456202600 ) ) ; +#14162 = ORIENTED_EDGE ( 'NONE', *, *, #4972, .F. ) ; +#14163 = CARTESIAN_POINT ( 'NONE', ( 2.397797793646018000, -19.58624576956128400, 7.986426127547408000 ) ) ; +#14164 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14165 = CARTESIAN_POINT ( 'NONE', ( 6.442130122090948600, -30.19320144700940700, 25.82045886669374100 ) ) ; +#14166 = DIRECTION ( 'NONE', ( 0.01909913463759017200, -0.9998175948922358700, 0.0000000000000000000 ) ) ; +#14167 = CARTESIAN_POINT ( 'NONE', ( 32.91041000429432000, -9.999999999997692500, 22.29714458510763100 ) ) ; +#14168 = CARTESIAN_POINT ( 'NONE', ( 23.54472917350626600, -39.49052192775052800, 19.80002530896317100 ) ) ; +#14169 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998900, -99.99999999999998600, -38.36942826376122900 ) ) ; +#14170 = CLOSED_SHELL ( 'NONE', ( #9026, #3785, #3717, #5090, #7771, #10806, #9597, #60, #14317, #11075, #7152, #1490, #5323, #12660, #3858, #1557, #11301, #150, #1051, #4237, #4591, #8798, #6268, #2836, #7680, #5169, #1624, #4868, #414, #4002, #2918, #13591, #10193, #5613, #5538, #5245, #1845, #852, #8130, #346, #13951, #6048, #11722, #4657, #2700, #6648, #7751, #12882, #4727, #13809, #1341, #4370, #13249, #10631, #12377, #987, #3080, #14106, #6931, #7839, #10399, #12162, #13458, #10323, #5517, #13113, #3001, #1763, #5757, #917, #13880, #12241, #9443, #2059, #13038, #10477, #11510, #8582, #10030, #2623, #7540, #10699, #8422, #1921, #11143, #12803, #5833, #13184, #12951, #5011, #13312, #6353, #4799, #8500, #4087, #6428, #9375, #12311, #5684, #12586, #11951, #5387, #4937, #1211, #276, #10949, #694, #14254, #13669, #10051, #11653, #6497, #10261, #770, #6116, #10873, #14383, #9682, #6721, #8051, #7376, #13736, #14186, #3357, #4523, #9905, #7080, #7613, #12023, #8349, #12523, #3435, #2344, #7293, #1123, #1414, #8728, #6562, #11870, #8281, #8660, #9963, #11366, #2120, #9830, #12224, #14027, #9159, #5903, #1695, #11160, #5452, #6628, #11578, #11229, #3211, #3637, #10124, #4163, #12729, #6790, #2769, #556, #8206, #9231, #3572, #7907, #76, #11440, #1141, #3936, #8866, #9762, #3147, #11792, #1994, #4307, #624, #3272, #488, #11013, #6196, #2557, #2481, #9525, #9305, #2276, #209, #1271, #7004, #10555, #10788, #7465, #7222, #2190 ) ) ; +#14171 = EDGE_CURVE ( 'NONE', #1180, #6970, #8147, .T. ) ; +#14172 = CARTESIAN_POINT ( 'NONE', ( 8.227649898237904900, -18.50789317828665800, -24.16618345691466600 ) ) ; +#14173 = CARTESIAN_POINT ( 'NONE', ( 11.81868641110522800, -11.87736136597332300, 24.32797557180215600 ) ) ; +#14174 = CARTESIAN_POINT ( 'NONE', ( 30.67144375525605300, -30.68583792560717100, 27.28397234159452400 ) ) ; +#14175 = CARTESIAN_POINT ( 'NONE', ( 2.944281121992390100, -26.40272028645483700, 10.75717662919190200 ) ) ; +#14176 = CARTESIAN_POINT ( 'NONE', ( 8.374264121066797600, -30.14687742872868600, 26.85306896554362100 ) ) ; +#14177 = CARTESIAN_POINT ( 'NONE', ( 36.83725541804629700, -29.62890865986297200, 22.73413058699052400 ) ) ; +#14178 = VERTEX_POINT ( 'NONE', #12001 ) ; +#14179 = AXIS2_PLACEMENT_3D ( 'NONE', #13919, #7243, #617 ) ; +#14180 = CARTESIAN_POINT ( 'NONE', ( 4.619836174214293900, -29.53146276304386900, 24.21729056915156200 ) ) ; +#14181 = CARTESIAN_POINT ( 'NONE', ( 31.41808571390552300, -95.07596123493894400, 14.41445870334524300 ) ) ; +#14182 = DIRECTION ( 'NONE', ( -0.9997116207813338000, 0.02364923651029132700, 0.004169998469919329400 ) ) ; +#14183 = ORIENTED_EDGE ( 'NONE', *, *, #12592, .F. ) ; +#14184 = DIRECTION ( 'NONE', ( 1.372070900348512700E-015, 0.04178190292040567100, 0.9991267550157736400 ) ) ; +#14185 = CARTESIAN_POINT ( 'NONE', ( 36.46755538005502500, -20.15368143779400600, -17.13918237906696300 ) ) ; +#14186 = ADVANCED_FACE ( 'NONE', ( #12208 ), #14281, .T. ) ; +#14187 = CARTESIAN_POINT ( 'NONE', ( 5.840391219197005800, -97.40634803306925000, 19.50070648530897400 ) ) ; +#14188 = CARTESIAN_POINT ( 'NONE', ( 34.39396292403905900, -31.12698881798114700, 24.56830051160807600 ) ) ; +#14189 = CARTESIAN_POINT ( 'NONE', ( 2.722416111078687500, -29.32124101843355400, 21.74606083152331600 ) ) ; +#14190 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #9626, #1817, #7409, #769, #8552, #1873, #9681, #2972, #10816, #4086 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.002293301478759547400, 0.004589413538251943500, 0.006885525597744338400, 0.009181637657236735000, 0.01147774971672913000 ), + .UNSPECIFIED. ) ; +#14191 = CARTESIAN_POINT ( 'NONE', ( 14.21012092569722000, -100.0000000000000300, -37.94977236663729800 ) ) ; +#14192 = CARTESIAN_POINT ( 'NONE', ( 22.43760577854698500, -31.29661376143278100, 28.74483239613230300 ) ) ; +#14193 = VERTEX_POINT ( 'NONE', #13112 ) ; +#14194 = EDGE_CURVE ( 'NONE', #7173, #8416, #14115, .T. ) ; +#14195 = CARTESIAN_POINT ( 'NONE', ( 32.54304192742467400, -30.60874662956444000, 26.40272586419121100 ) ) ; +#14196 = CARTESIAN_POINT ( 'NONE', ( 12.09117524114601300, -10.70508120317685800, 25.00000000000000000 ) ) ; +#14197 = CARTESIAN_POINT ( 'NONE', ( 0.1022402536511108600, -10.40896101460438700, 11.19956748077755500 ) ) ; +#14198 = CARTESIAN_POINT ( 'NONE', ( 11.57586631041360700, -20.97195308707439000, -22.91400485126196400 ) ) ; +#14199 = ORIENTED_EDGE ( 'NONE', *, *, #12306, .T. ) ; +#14200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.00000000000000000, 25.00000000000000000 ) ) ; +#14201 = FACE_OUTER_BOUND ( 'NONE', #2111, .T. ) ; +#14202 = CARTESIAN_POINT ( 'NONE', ( 4.218134334917383700, -95.07596123493894400, 10.89148259895586600 ) ) ; +#14203 = CARTESIAN_POINT ( 'NONE', ( 16.28981210128987900, -97.51638472417445800, 22.06850011906649200 ) ) ; +#14204 = CARTESIAN_POINT ( 'NONE', ( 22.89975235239986500, -19.62483147778320400, 23.30288252126530700 ) ) ; +#14205 = CARTESIAN_POINT ( 'NONE', ( 3.227163893138810500, -14.12594571017074900, -19.94493447253238100 ) ) ; +#14206 = CARTESIAN_POINT ( 'NONE', ( 10.44463142946313800, -30.85067877493411000, 27.67347775593344700 ) ) ; +#14207 = CARTESIAN_POINT ( 'NONE', ( 35.13370088663201300, -30.74504435012975300, 24.35123047150653300 ) ) ; +#14208 = CARTESIAN_POINT ( 'NONE', ( 14.66083427333782700, -20.80813042393059900, -24.07993569872373400 ) ) ; +#14209 = CIRCLE ( 'NONE', #1232, 1.200000000000012600 ) ; +#14210 = CARTESIAN_POINT ( 'NONE', ( 37.79857499854667700, -18.80570000581315100, 7.788262581895397200 ) ) ; +#14211 = VERTEX_POINT ( 'NONE', #6453 ) ; +#14212 = CARTESIAN_POINT ( 'NONE', ( 2.499541693059094300, -20.40119036258279200, 7.982581926372016100 ) ) ; +#14213 = CARTESIAN_POINT ( 'NONE', ( 6.749567455736104700, -31.16774041495692100, 25.58273958213220200 ) ) ; +#14214 = CARTESIAN_POINT ( 'NONE', ( 8.140531928503428100, -19.18153783520920900, -23.91087165560742600 ) ) ; +#14215 = CARTESIAN_POINT ( 'NONE', ( 29.00089597641567000, -10.00000000000000000, 26.61021339582496700 ) ) ; +#14216 = CARTESIAN_POINT ( 'NONE', ( 29.42317665554845600, -32.84459165560512900, 27.24682378892581300 ) ) ; +#14217 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #6294, #10786, #7436, #796, #8579, #1896 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.002128540118321337000, 0.003192548568959128000, 0.004256557019596918900 ), + .UNSPECIFIED. ) ; +#14218 = CARTESIAN_POINT ( 'NONE', ( 3.757304454103680900, -28.94422525121783700, 22.40972965717272600 ) ) ; +#14219 = CARTESIAN_POINT ( 'NONE', ( 10.17828621111027400, -99.99999999999995700, 4.226339706232151300 ) ) ; +#14220 = ORIENTED_EDGE ( 'NONE', *, *, #2516, .T. ) ; +#14221 = CARTESIAN_POINT ( 'NONE', ( 12.28654193368597400, -22.38857464935726300, -26.24365844918745300 ) ) ; +#14222 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -97.57596123416667000, 12.92974142702295900 ) ) ; +#14223 = CARTESIAN_POINT ( 'NONE', ( 30.65851793624783300, -31.00209063203425700, 27.19749873817345800 ) ) ; +#14224 = CARTESIAN_POINT ( 'NONE', ( 8.436959657821860900, -30.73571541618309100, 26.87175442056537400 ) ) ; +#14225 = CARTESIAN_POINT ( 'NONE', ( 36.21137037542254000, -30.70740981590321200, 22.51058048386413500 ) ) ; +#14226 = VERTEX_POINT ( 'NONE', #4214 ) ; +#14227 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, -2.500000000000017800, 25.00000000000000000 ) ) ; +#14228 = CARTESIAN_POINT ( 'NONE', ( 4.883018142489685700, -30.93690272719042900, 24.03075068805040000 ) ) ; +#14229 = CARTESIAN_POINT ( 'NONE', ( 37.49999999999999300, -97.35825781804945200, 15.16559787157411400 ) ) ; +#14230 = ORIENTED_EDGE ( 'NONE', *, *, #3328, .T. ) ; +#14231 = CARTESIAN_POINT ( 'NONE', ( 34.40207650308352100, -21.98988997882465000, -21.16644079261540800 ) ) ; +#14232 = CARTESIAN_POINT ( 'NONE', ( 23.93675335666439700, -18.96952216113471600, 23.40004414730161400 ) ) ; +#14233 = CARTESIAN_POINT ( 'NONE', ( 25.13299591619192700, -31.18422324425348800, 28.61505639569379900 ) ) ; +#14234 = CARTESIAN_POINT ( 'NONE', ( 32.94378585801498400, -31.16585000597531500, 25.81760091689338700 ) ) ; +#14235 = EDGE_CURVE ( 'NONE', #9017, #5650, #6766, .T. ) ; +#14236 = CARTESIAN_POINT ( 'NONE', ( 3.569872570505011800, -30.57927835377139300, 21.58618976019509000 ) ) ; +#14237 = CIRCLE ( 'NONE', #7307, 5.000000000000000900 ) ; +#14238 = CARTESIAN_POINT ( 'NONE', ( 35.00000000000000000, 9.500000000000000000, 20.00000000000000000 ) ) ; +#14239 = CARTESIAN_POINT ( 'NONE', ( 22.49999999999998900, -94.87460690261258400, 20.85928444527439000 ) ) ; +#14240 = CARTESIAN_POINT ( 'NONE', ( 32.45934358762914200, -31.14846237612695000, 26.16294781597156300 ) ) ; +#14241 = CARTESIAN_POINT ( 'NONE', ( 2.870303696143392500, -21.51165967167653600, -15.19712684791761100 ) ) ; +#14242 = CARTESIAN_POINT ( 'NONE', ( 2.752102292811128700E-013, -10.00000000000104600, 10.07066977211006000 ) ) ; +#14243 = CARTESIAN_POINT ( 'NONE', ( 11.78623946821185300, -12.50000000000039400, -21.56156557527153300 ) ) ; +#14244 = EDGE_LOOP ( 'NONE', ( #11419, #11587 ) ) ; +#14245 = CARTESIAN_POINT ( 'NONE', ( 37.41397862647658500, -7.500000000000000000, 20.65015935806433200 ) ) ; +#14246 = CARTESIAN_POINT ( 'NONE', ( 10.26326242653610000, -94.73833097814224400, 17.59060894189564900 ) ) ; +#14247 = CARTESIAN_POINT ( 'NONE', ( 1.600000000000004100, 7.000000000000000000, 3.189999999999994200 ) ) ; +#14248 = CARTESIAN_POINT ( 'NONE', ( 38.39999999999999900, 7.000000000000000000, -17.49999999999999600 ) ) ; +#14249 = CARTESIAN_POINT ( 'NONE', ( 10.44462899338437000, -30.71346309022038300, 27.69767163670322300 ) ) ; +#14250 = CARTESIAN_POINT ( 'NONE', ( 34.65157789974318800, -29.40249068743013800, 24.69098088723322000 ) ) ; +#14251 = CARTESIAN_POINT ( 'NONE', ( 3.317238614243891900, -30.35988450131568300, 20.90680985567111700 ) ) ; +#14252 = EDGE_CURVE ( 'NONE', #5650, #10929, #14096, .T. ) ; +#14253 = CARTESIAN_POINT ( 'NONE', ( 6.665822306358840000, -21.63372900294012900, -18.18368848586229400 ) ) ; +#14254 = ADVANCED_FACE ( 'NONE', ( #13753, #13416 ), #10995, .F. ) ; +#14255 = CARTESIAN_POINT ( 'NONE', ( 2.504318297122622500, -21.20084559459637000, 8.159044756779373100 ) ) ; +#14256 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999992000, -21.23116646380259100, -11.74895849411024600 ) ) ; +#14257 = CARTESIAN_POINT ( 'NONE', ( 6.604669314801711300, -30.43969969241243200, 25.92838264763386000 ) ) ; +#14258 = CARTESIAN_POINT ( 'NONE', ( 15.72781499394672300, -18.79485666001565000, -26.55077052062423300 ) ) ; +#14259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#14260 = CARTESIAN_POINT ( 'NONE', ( 28.72054899248566800, -31.68901400624405400, 19.83727737291167900 ) ) ; +#14261 = CARTESIAN_POINT ( 'NONE', ( 4.440353231838019000, -29.10420952292824700, 23.55233825761260000 ) ) ; +#14262 = CARTESIAN_POINT ( 'NONE', ( 5.079444058923986200, -99.99999999999995700, -4.444869195815385000 ) ) ; +#14263 = AXIS2_PLACEMENT_3D ( 'NONE', #12628, #5921, #13731 ) ; +#14264 = CARTESIAN_POINT ( 'NONE', ( 15.70353019370014800, -20.43188375272629600, -26.76266697163081400 ) ) ; +#14265 = CARTESIAN_POINT ( 'NONE', ( 30.36819461477690800, -30.63015132903693400, 27.41253313091962700 ) ) ; +#14266 = CARTESIAN_POINT ( 'NONE', ( 23.33308423735437700, -20.28809933267076800, -24.31406949255853400 ) ) ; +#14267 = CARTESIAN_POINT ( 'NONE', ( 8.459966201546063000, -30.24767969577207400, 26.90848659033908100 ) ) ; +#14268 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #12049, #10952, #2043, #9855, #3149, #10998, #4267, #12095, #5368, #13209, #6499, #14298 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.003136284480202282500, 0.006272568960404565000, 0.007840711200505706000, 0.009408853440606847900, 0.01254513792080913500 ), + .UNSPECIFIED. ) ; +#14269 = CARTESIAN_POINT ( 'NONE', ( 36.14802397160898600, -29.29560184038135500, 23.20265218156605900 ) ) ; +#14270 = ORIENTED_EDGE ( 'NONE', *, *, #12658, .T. ) ; +#14271 = EDGE_CURVE ( 'NONE', #5650, #7532, #11823, .T. ) ; +#14272 = CARTESIAN_POINT ( 'NONE', ( 4.582436863606027100, -29.99754038453680100, 24.47548221607448200 ) ) ; +#14273 = CARTESIAN_POINT ( 'NONE', ( 30.50790019869761900, -18.48707909776439700, -25.01688062553118600 ) ) ; +#14274 = CARTESIAN_POINT ( 'NONE', ( 37.18470294508925600, -29.24096474939453600, 21.69221924097000800 ) ) ; +#14275 = CARTESIAN_POINT ( 'NONE', ( 22.35960558233108500, -33.35446909076585300, 26.50697697917649300 ) ) ; +#14276 = CARTESIAN_POINT ( 'NONE', ( 31.46162464203746400, -31.08197792564034900, 26.77939031994576200 ) ) ; +#14277 = CARTESIAN_POINT ( 'NONE', ( 2.508440080243536900, -29.67417701784103900, 21.74726104533269600 ) ) ; +#14278 = FACE_OUTER_BOUND ( 'NONE', #14154, .T. ) ; +#14279 = CARTESIAN_POINT ( 'NONE', ( 0.01415501518459279800, 5.611350496477608200, 20.39431017161785300 ) ) ; +#14280 = CARTESIAN_POINT ( 'NONE', ( 32.15212946430169400, -30.50007555554440900, 26.62310714895933100 ) ) ; +#14281 = SPHERICAL_SURFACE ( 'NONE', #782, 2.500000000000000000 ) ; +#14282 = ORIENTED_EDGE ( 'NONE', *, *, #14051, .F. ) ; +#14283 = CARTESIAN_POINT ( 'NONE', ( 9.891801314979614900, -22.29744402825067700, -25.07340619622892300 ) ) ; +#14284 = CARTESIAN_POINT ( 'NONE', ( 16.13196795458574300, -12.50000000000000700, -14.12960045978890600 ) ) ; +#14285 = DIRECTION ( 'NONE', ( 1.000000000000000000, -4.336808689942017100E-017, -7.523163845262638700E-033 ) ) ; +#14286 = CARTESIAN_POINT ( 'NONE', ( 19.20107738884311700, -25.49316313803630200, 22.26813732225501100 ) ) ; +#14287 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4351, #11074, #5451, #13289, #6585, #14382 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.5000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) ; +#14288 = CARTESIAN_POINT ( 'NONE', ( 6.155159714731847300, -93.13341222091405300, 20.37534970955691800 ) ) ; +#14289 = CARTESIAN_POINT ( 'NONE', ( 39.99999999999870000, -10.00000000000010100, -19.07833040940952800 ) ) ; +#14290 = CARTESIAN_POINT ( 'NONE', ( 28.68813440735806400, -11.14063917059208100, 24.45614895767085900 ) ) ; +#14291 = CARTESIAN_POINT ( 'NONE', ( 10.75144309496260700, -30.86878691965498300, 27.77124526362770100 ) ) ; +#14292 = CARTESIAN_POINT ( 'NONE', ( 34.94839962223795000, -30.44440123420870500, 24.82042367902885300 ) ) ; +#14293 = EDGE_LOOP ( 'NONE', ( #14230, #681, #7427, #1951 ) ) ; +#14294 = CARTESIAN_POINT ( 'NONE', ( 39.95216114438938600, 7.000000000000000000, -20.68999999999999400 ) ) ; +#14295 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, -22.48607553531700300, -12.07362302440655600 ) ) ; +#14296 = CARTESIAN_POINT ( 'NONE', ( 22.31280744310812000, -30.86501923738228100, 26.28236762573406800 ) ) ; +#14297 = CARTESIAN_POINT ( 'NONE', ( 2.230022241429415100, -18.81603790680760100, 8.858216324252111900 ) ) ; +#14298 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999999300, -94.74682992296695300, 18.71443453778783800 ) ) ; +#14299 = CARTESIAN_POINT ( 'NONE', ( 6.749941197478121600, -29.69927197427191600, 25.84111729669642100 ) ) ; +#14300 = CARTESIAN_POINT ( 'NONE', ( 16.14961390492279800, -21.45889517419793100, -27.02051238834479500 ) ) ; +#14301 = CARTESIAN_POINT ( 'NONE', ( 3.851859888774471700E-031, 7.000000000000000000, -17.49999999999999600 ) ) ; +#14302 = AXIS2_PLACEMENT_3D ( 'NONE', #11072, #4350, #12183 ) ; +#14303 = CARTESIAN_POINT ( 'NONE', ( 32.01769791322250600, -37.55838243924515800, 16.69312461151124800 ) ) ; +#14304 = CARTESIAN_POINT ( 'NONE', ( 5.877807399947339900, -29.46295421936896000, 25.13086310000889500 ) ) ; +#14305 = CARTESIAN_POINT ( 'NONE', ( 2.366003869806051300, -10.00577354972706000, 20.10430461088509800 ) ) ; +#14306 = CARTESIAN_POINT ( 'NONE', ( 37.50001957935717900, -21.23394530153775900, 7.806959251759183300 ) ) ; +#14307 = ORIENTED_EDGE ( 'NONE', *, *, #9314, .T. ) ; +#14308 = CARTESIAN_POINT ( 'NONE', ( 30.36608130490266100, -30.89180855170681600, 27.36072928608541600 ) ) ; +#14309 = CARTESIAN_POINT ( 'NONE', ( 28.08116180380680800, -100.0000000000000300, -37.06069147054358100 ) ) ; +#14310 = CARTESIAN_POINT ( 'NONE', ( 8.644893328372610600, -30.92899061300779100, 26.90709933628550800 ) ) ; +#14311 = CARTESIAN_POINT ( 'NONE', ( 36.35253622709741700, -30.44342071599930600, 23.04107585750664500 ) ) ; +#14312 = EDGE_CURVE ( 'NONE', #13204, #13818, #13402, .T. ) ; +#14313 = ORIENTED_EDGE ( 'NONE', *, *, #8437, .T. ) ; +#14314 = CARTESIAN_POINT ( 'NONE', ( 5.111105557929857200, -31.07150723336445400, 24.05381380849388500 ) ) ; +#14315 = CARTESIAN_POINT ( 'NONE', ( 27.61192390625886300, -20.40739301209000100, -25.93220537613718000 ) ) ; +#14316 = CARTESIAN_POINT ( 'NONE', ( 36.88139272317314300, -30.36162662067238900, 21.49461609791456600 ) ) ; +#14317 = ADVANCED_FACE ( 'NONE', ( #13095 ), #12894, .F. ) ; +#14318 = ORIENTED_EDGE ( 'NONE', *, *, #12856, .F. ) ; +#14319 = AXIS2_PLACEMENT_3D ( 'NONE', #2999, #7437, #10844 ) ; +#14320 = CARTESIAN_POINT ( 'NONE', ( 29.98648543503571400, -30.94505915327467300, 27.49084724933929300 ) ) ; +#14321 = CARTESIAN_POINT ( 'NONE', ( 3.571568047486187500, -28.88593925240519100, 21.88494458214711400 ) ) ; +#14322 = CARTESIAN_POINT ( 'NONE', ( 17.49999999999998200, -95.43443845998484700, 21.53726769629901100 ) ) ; +#14323 = CARTESIAN_POINT ( 'NONE', ( 32.10174635904117900, -31.09047701479900600, 26.42396216307293600 ) ) ; +#14324 = ORIENTED_EDGE ( 'NONE', *, *, #11911, .T. ) ; +#14325 = CARTESIAN_POINT ( 'NONE', ( 28.95639238790372600, -10.32692378197508100, -25.03310972204117800 ) ) ; +#14326 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999988500, -22.50000000000000700, 7.564513562858107500 ) ) ; +#14327 = CARTESIAN_POINT ( 'NONE', ( 10.10158567430931200, -21.10043265203455600, -21.99585538694785900 ) ) ; +#14328 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#14329 = EDGE_CURVE ( 'NONE', #1180, #3457, #14287, .T. ) ; +#14330 = CARTESIAN_POINT ( 'NONE', ( 22.65459685038170800, -21.17801275585939200, 30.64417503465986000 ) ) ; +#14331 = ORIENTED_EDGE ( 'NONE', *, *, #6865, .T. ) ; +#14332 = CARTESIAN_POINT ( 'NONE', ( 4.273767786654813600, -97.42943879685165600, 18.67382214457742500 ) ) ; +#14333 = CARTESIAN_POINT ( 'NONE', ( 17.44205019309341500, -33.35025653084942100, 26.50741664928542100 ) ) ; +#14334 = CARTESIAN_POINT ( 'NONE', ( 10.75252014072076900, -30.78739843113778500, 27.78736872699998300 ) ) ; +#14335 = CARTESIAN_POINT ( 'NONE', ( 34.46154371071714500, -29.37412196055397800, 24.81147327460879400 ) ) ; +#14336 = ORIENTED_EDGE ( 'NONE', *, *, #4240, .F. ) ; +#14337 = AXIS2_PLACEMENT_3D ( 'NONE', #1946, #9760, #3051 ) ; +#14338 = CARTESIAN_POINT ( 'NONE', ( 23.33686484696152200, -24.23361514163373400, 19.96928895051953400 ) ) ; +#14339 = CARTESIAN_POINT ( 'NONE', ( 33.74959368094671000, -31.16267414197514200, 25.16788376114590900 ) ) ; +#14340 = FACE_BOUND ( 'NONE', #1117, .T. ) ; +#14341 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #8406, #9477, #1724 ), + ( #9534, #2819, #10662 ), + ( #3943, #11776, #5044 ), + ( #12888, #6176, #13984 ), + ( #7303, #677, #8455 ), + ( #1772, #9577, #2873 ), + ( #10709, #3987, #11824 ), + ( #5097, #12934, #6226 ), + ( #14036, #7357, #728 ), + ( #8510, #1826, #9635 ), + ( #2928, #10771, #4037 ), + ( #11879, #5152, #12990 ), + ( #6279, #14090, #7420 ), + ( #779, #8563, #1881 ), + ( #9691, #2981, #10825 ), + ( #4096, #11930, #5206 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 2.168404344971008900E-019, 0.0005114279760275386900, 0.001022855952055077200, 0.001534283928082615800, 0.002045711904110154300, 0.002557139880137692700, 0.003068567856165231500, 0.004091423808220308700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.9961946980917461000, 1.000000000000000000), + ( 1.000000000000000000, 0.9963938160314288500, 1.000000000000000000), + ( 1.000000000000000000, 0.9965341554606603800, 1.000000000000000000), + ( 1.000000000000000000, 0.9966823514121121400, 1.000000000000000000), + ( 1.000000000000000000, 0.9966877684515383900, 1.000000000000000000), + ( 1.000000000000000000, 0.9965631945344487500, 1.000000000000000000), + ( 1.000000000000000000, 0.9964340613743533100, 1.000000000000000000), + ( 1.000000000000000000, 0.9960662700568173600, 1.000000000000000000), + ( 1.000000000000000000, 0.9958327715362999000, 1.000000000000000000), + ( 1.000000000000000000, 0.9952929148004293600, 1.000000000000000000), + ( 1.000000000000000000, 0.9949839677402307900, 1.000000000000000000), + ( 1.000000000000000000, 0.9943226693139710600, 1.000000000000000000), + ( 1.000000000000000000, 0.9939710235309765500, 1.000000000000000000), + ( 1.000000000000000000, 0.9928712265998920200, 1.000000000000000000), + ( 1.000000000000000000, 0.9920780820134632600, 1.000000000000000000), + ( 1.000000000000000000, 0.9912542995308129000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#14342 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 7.000000000000000000, -17.49999999999999600 ) ) ; +#14343 = CARTESIAN_POINT ( 'NONE', ( 2.505814898055199500, -19.56800328239102200, 9.848228513063027400 ) ) ; +#14344 = CARTESIAN_POINT ( 'NONE', ( 37.57988150232253600, -10.00118533589592900, 20.28354112649145300 ) ) ; +#14345 = CARTESIAN_POINT ( 'NONE', ( 6.704347898586108900, -30.63045660095246300, 25.94370433079056000 ) ) ; +#14346 = CARTESIAN_POINT ( 'NONE', ( 37.02813417096635400, -29.92734082028123800, 19.49139426587200300 ) ) ; +#14347 = CARTESIAN_POINT ( 'NONE', ( 8.433737621243674100, -30.16212278357176400, 26.88344618294197400 ) ) ; +#14348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14349 = EDGE_CURVE ( 'NONE', #10401, #7720, #13399, .T. ) ; +#14350 = CARTESIAN_POINT ( 'NONE', ( 37.50060825554801600, -20.40595611383989900, 7.887984557882481900 ) ) ; +#14351 = ORIENTED_EDGE ( 'NONE', *, *, #798, .T. ) ; +#14352 = CARTESIAN_POINT ( 'NONE', ( 30.16323461085441300, -30.55914078172243700, 27.49516557918740700 ) ) ; +#14353 = CYLINDRICAL_SURFACE ( 'NONE', #546, 14.99999999999999800 ) ; +#14354 = CARTESIAN_POINT ( 'NONE', ( 32.46386659179886200, -20.28809933267076800, -19.31551882067622100 ) ) ; +#14355 = CARTESIAN_POINT ( 'NONE', ( 8.637467213605209100, -30.48385974205971000, 27.00198292283226600 ) ) ; +#14356 = CARTESIAN_POINT ( 'NONE', ( 35.72902869551565900, -29.08888114970892100, 23.35591676997914200 ) ) ; +#14357 = ORIENTED_EDGE ( 'NONE', *, *, #11298, .F. ) ; +#14358 = CARTESIAN_POINT ( 'NONE', ( 4.702081087298347000, -30.28089488136290400, 24.58904019522190200 ) ) ; +#14359 = CARTESIAN_POINT ( 'NONE', ( 24.33596173416210500, -22.45625153662517400, -27.11604327503649600 ) ) ; +#14360 = CARTESIAN_POINT ( 'NONE', ( 23.84878276351132000, -33.30850345544718700, 26.48024639151466200 ) ) ; +#14361 = ORIENTED_EDGE ( 'NONE', *, *, #12492, .T. ) ; +#14362 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#14363 = CARTESIAN_POINT ( 'NONE', ( 2.641263380998855500, -30.02625916725272500, 21.79557810585578900 ) ) ; +#14364 = VECTOR ( 'NONE', #5039, 1000.000000000000000 ) ; +#14365 = CARTESIAN_POINT ( 'NONE', ( 24.28910644491530100, -17.92969082727391900, 23.60178155847522100 ) ) ; +#14366 = CARTESIAN_POINT ( 'NONE', ( 31.94048122772991100, -30.30641899737554800, 26.72558934290074700 ) ) ; +#14367 = CARTESIAN_POINT ( 'NONE', ( 29.14586075242131000, -30.86281048228569200, 27.80563514586423300 ) ) ; +#14368 = ORIENTED_EDGE ( 'NONE', *, *, #13171, .T. ) ; +#14369 = CARTESIAN_POINT ( 'NONE', ( 22.32565149532536000, -9.904351252611268900, 25.84110433792762900 ) ) ; +#14370 = CARTESIAN_POINT ( 'NONE', ( 5.159708271019089100, -22.78098025675403400, 9.585355996988292700 ) ) ; +#14371 = CARTESIAN_POINT ( 'NONE', ( 9.670455792570674400, -12.50000000000007300, -20.19328962741847600 ) ) ; +#14372 = CARTESIAN_POINT ( 'NONE', ( 2.015497905913716400, -11.89736398432790500, -18.74592009292172500 ) ) ; +#14373 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -99.99999999999998600, -40.86942826376123600 ) ) ; +#14374 = ORIENTED_EDGE ( 'NONE', *, *, #12742, .F. ) ; +#14375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#14376 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000700, -21.23258414291792900, -11.56336995959023500 ) ) ; +#14377 = CARTESIAN_POINT ( 'NONE', ( 10.85395141082100400, -30.86424268165969700, 27.80524411472469000 ) ) ; +#14378 = CARTESIAN_POINT ( 'NONE', ( 34.77557652340726700, -30.22644292507806800, 25.00830666976393600 ) ) ; +#14379 = CARTESIAN_POINT ( 'NONE', ( 24.94810975632065800, -12.50000000000025600, 21.81835511055813000 ) ) ; +#14380 = CARTESIAN_POINT ( 'NONE', ( 33.83999573504986100, -30.24562769207580400, 25.63943904107701900 ) ) ; +#14381 = CARTESIAN_POINT ( 'NONE', ( 35.59532887292323300, -10.00000000000000200, 22.49587288321171700 ) ) ; +#14382 = CARTESIAN_POINT ( 'NONE', ( 37.49944835869821000, -21.21984131747930000, 7.920870232712987400 ) ) ; +#14383 = ADVANCED_FACE ( 'NONE', ( #13255, #2253 ), #1077, .F. ) ; +#14384 = CARTESIAN_POINT ( 'NONE', ( 2.859397883565005100, -20.24693225711299100, 11.31543108914372200 ) ) ; +#14385 = CARTESIAN_POINT ( 'NONE', ( 6.798409909841693000, -29.85073776377840500, 25.93835049824258500 ) ) ; +#14386 = CARTESIAN_POINT ( 'NONE', ( 22.44829993165052100, -27.96429671943140600, 27.45736486687246000 ) ) ; +#14387 = LINE ( 'NONE', #6171, #8265 ) ; +#14388 = ORIENTED_EDGE ( 'NONE', *, *, #14252, .F. ) ; +#14389 = CARTESIAN_POINT ( 'NONE', ( 35.59528913023091700, -30.68603640414973200, 13.69970711763386500 ) ) ; +#14390 = EDGE_CURVE ( 'NONE', #14226, #4036, #12708, .T. ) ; +#14391 = CARTESIAN_POINT ( 'NONE', ( 9.707770823025812800, -30.49000882249264800, 27.44716268834328000 ) ) ; +#14392 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, -10.10408813407544300, 13.29484326533572900 ) ) ; +#14393 = CARTESIAN_POINT ( 'NONE', ( 37.60233420675599100, -19.58678552426529500, 7.946506751879993200 ) ) ; +#14394 = VERTEX_POINT ( 'NONE', #35 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Lock.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Lock.step new file mode 100644 index 0000000..f2585c9 --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Lock.step @@ -0,0 +1,664 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Lock.STEP', + '2013-11-14T05:09:33', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, 2.500000000000000000 ) ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( -2.299999999999992300, 6.250000000000000000, -1.999999999999999600 ) ) ; +#3 = ORIENTED_EDGE ( 'NONE', *, *, #177, .T. ) ; +#4 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#5 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#6 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, -2.500000000000000000 ) ) ; +#8 = DATE_TIME_ROLE ( 'classification_date' ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 2.500000000000000000 ) ) ; +#10 = ORIENTED_EDGE ( 'NONE', *, *, #456, .T. ) ; +#11 = APPROVAL ( #298, 'UNSPECIFIED' ) ; +#12 = VERTEX_POINT ( 'NONE', #52 ) ; +#13 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #284, #6, ( #285 ) ) ; +#14 = DIRECTION ( 'NONE', ( -0.8574929257125449800, 0.0000000000000000000, -0.5144957554275252400 ) ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ; +#16 = AXIS2_PLACEMENT_3D ( 'NONE', #257, #36, #304 ) ; +#17 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #352, #447 ), + ( #281, #62 ), + ( #340, #95 ), + ( #388, #128 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.8047378541243649400, 0.8047378541243649400), + ( 0.8047378541243649400, 0.8047378541243649400), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#18 = VERTEX_POINT ( 'NONE', #332 ) ; +#19 = VERTEX_POINT ( 'NONE', #324 ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( 3.332650799042643300, 5.498671657747176600, -2.000000000000000400 ) ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 2.000000000000000000 ) ) ; +#22 = EDGE_CURVE ( 'NONE', #85, #390, #481, .T. ) ; +#23 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#24 = ORIENTED_EDGE ( 'NONE', *, *, #177, .F. ) ; +#25 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999997800, 3.593145750507619400, 1.999999999999999600 ) ) ; +#26 = ORIENTED_EDGE ( 'NONE', *, *, #233, .T. ) ; +#27 = CC_DESIGN_APPROVAL ( #11, ( #51 ) ) ; +#28 = CARTESIAN_POINT ( 'NONE', ( 0.2599457969576740000, 5.999999999999998200, -1.999999999999999600 ) ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.749999999999917400, -2.501000000000000300 ) ) ; +#30 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #246 ) ; +#31 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32 = APPROVAL_ROLE ( '' ) ; +#33 = PLANE ( 'NONE', #351 ) ; +#34 = VERTEX_POINT ( 'NONE', #144 ) ; +#35 = ORIENTED_EDGE ( 'NONE', *, *, #505, .F. ) ; +#36 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#37 = AXIS2_PLACEMENT_3D ( 'NONE', #425, #488, #192 ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 2.453554596516420700, 6.000000000000002700, 2.000000000000000400 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ; +#40 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 1.999999999999999600 ) ) ; +#42 = AXIS2_PLACEMENT_3D ( 'NONE', #302, #66, #349 ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, -2.000000000000000000 ) ) ; +#44 = VERTEX_POINT ( 'NONE', #373 ) ; +#45 = ORIENTED_EDGE ( 'NONE', *, *, #108, .F. ) ; +#46 = ORIENTED_EDGE ( 'NONE', *, *, #258, .T. ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( -0.8233520233941782300, 5.180977768534856600, -1.999999999999999600 ) ) ; +#48 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #231, #161, ( #189 ) ) ; +#49 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#50 = ORIENTED_EDGE ( 'NONE', *, *, #342, .F. ) ; +#51 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #189, #508 ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, -2.500000000000000000 ) ) ; +#53 = PLANE ( 'NONE', #80 ) ; +#54 = ORIENTED_EDGE ( 'NONE', *, *, #143, .F. ) ; +#55 = EDGE_LOOP ( 'NONE', ( #142, #46, #26, #179, #204, #110, #104, #275 ) ) ; +#56 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.750000000000000400, 2.000000000000000000 ) ) ; +#57 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ; +#59 = EDGE_LOOP ( 'NONE', ( #288, #163, #24, #509 ) ) ; +#60 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#61 = APPROVAL_ROLE ( '' ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( 0.03553390593273781500, 5.249999999999999100, 2.000000000000000000 ) ) ; +#63 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#64 = EDGE_LOOP ( 'NONE', ( #345, #73, #111, #191 ) ) ; +#65 = CC_DESIGN_APPROVAL ( #183, ( #157 ) ) ; +#66 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67 = CC_DESIGN_APPROVAL ( #185, ( #189 ) ) ; +#68 = VERTEX_POINT ( 'NONE', #234 ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 2.000000000000000000 ) ) ; +#70 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71 = EDGE_CURVE ( 'NONE', #534, #305, #486, .T. ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( 0.03553390593273780800, 5.249999999999999100, -2.000000000000000000 ) ) ; +#73 = ORIENTED_EDGE ( 'NONE', *, *, #101, .T. ) ; +#74 = ORIENTED_EDGE ( 'NONE', *, *, #162, .F. ) ; +#75 = PLANE ( 'NONE', #466 ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 0.03553390593273780800, 5.249999999999999100, 1.999999999999999600 ) ) ; +#77 = ORIENTED_EDGE ( 'NONE', *, *, #386, .T. ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000000200, 2.000000000000000400 ) ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 2.453554596516420700, 6.000000000000001800, -2.000000000000000000 ) ) ; +#80 = AXIS2_PLACEMENT_3D ( 'NONE', #392, #443, #166 ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, 3.593145750507618500, 1.999999999999999600 ) ) ; +#82 = DIRECTION ( 'NONE', ( -0.5144957554275252400, 0.0000000000000000000, 0.8574929257125449800 ) ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( 0.2599457969576736100, 5.999999999999998200, 1.999999999999999600 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 1.999999999999999600 ) ) ; +#85 = VERTEX_POINT ( 'NONE', #245 ) ; +#86 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #232, #438, ( #189 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( -2.000000000000000000, 3.750000000000000400, 2.000000000000000000 ) ) ; +#88 = CARTESIAN_POINT ( 'NONE', ( 2.964466094067261400, 5.249999999999999100, 1.999999999999999600 ) ) ; +#89 = EDGE_CURVE ( 'NONE', #305, #44, #475, .T. ) ; +#90 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude2', #414 ) ; +#91 = EDGE_LOOP ( 'NONE', ( #147, #240, #383, #299 ) ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000000200, 2.000000000000000400 ) ) ; +#93 = DATE_TIME_ROLE ( 'creation_date' ) ; +#94 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999994400, 3.593145750507619900, 2.000000000000000000 ) ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( -2.299999999999992300, 3.750000000000000400, -1.999999999999999600 ) ) ; +#97 = EDGE_CURVE ( 'NONE', #347, #344, #485, .T. ) ; +#98 = ORIENTED_EDGE ( 'NONE', *, *, #342, .T. ) ; +#99 = ORIENTED_EDGE ( 'NONE', *, *, #424, .T. ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 1.249999999999998900, -2.000000000000000000 ) ) ; +#101 = EDGE_CURVE ( 'NONE', #327, #305, #471, .T. ) ; +#102 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #39, #169 ), + ( #450, #105 ), + ( #399, #528 ), + ( #467, #362 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.9157260586911510900, 0.9157260586911510900), + ( 0.9157260586911510900, 0.9157260586911510900), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#103 = EDGE_CURVE ( 'NONE', #535, #410, #465, .T. ) ; +#104 = ORIENTED_EDGE ( 'NONE', *, *, #456, .F. ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( 0.2599457969576740000, 5.999999999999998200, 1.999999999999999800 ) ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, -2.000000000000000000 ) ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 1.999999999999999600 ) ) ; +#108 = EDGE_CURVE ( 'NONE', #44, #85, #482, .T. ) ; +#109 = DIRECTION ( 'NONE', ( -1.734723475976807300E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#110 = ORIENTED_EDGE ( 'NONE', *, *, #370, .F. ) ; +#111 = ORIENTED_EDGE ( 'NONE', *, *, #71, .F. ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.501000000000000300 ) ) ; +#113 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #230, #201, ( #157 ) ) ; +#114 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#115 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #84, #88, #81, #78 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#116 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000001100, 2.000000000000000000 ) ) ; +#117 = EDGE_CURVE ( 'NONE', #34, #347, #455, .T. ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 0.0000000000000000000, -2.500000000000000000 ) ) ; +#119 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.501000000000000300 ) ) ; +#120 = ORIENTED_EDGE ( 'NONE', *, *, #233, .F. ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 6.250000000000000000, -2.500000000000000000 ) ) ; +#122 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#124 = VERTEX_POINT ( 'NONE', #149 ) ; +#125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#126 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#127 = APPROVAL_ROLE ( '' ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, 2.000000000000000000 ) ) ; +#129 = EDGE_CURVE ( 'NONE', #186, #344, #115, .T. ) ; +#130 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.750000000000000400, -1.999999999999999600 ) ) ; +#131 = ORIENTED_EDGE ( 'NONE', *, *, #263, .F. ) ; +#132 = ORIENTED_EDGE ( 'NONE', *, *, #258, .F. ) ; +#133 = EDGE_CURVE ( 'NONE', #501, #410, #461, .T. ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( 3.332650799042643300, 5.498671657747176600, 2.000000000000000400 ) ) ; +#135 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #155, 'distance_accuracy_value', 'NONE'); +#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#137 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #219, #8, ( #157 ) ) ; +#138 = EDGE_CURVE ( 'NONE', #390, #124, #172, .T. ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 1.249999999999998900, 2.000000000000000000 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 2.453554596516420700, 6.000000000000001800, 1.999999999999999600 ) ) ; +#141 = ORIENTED_EDGE ( 'NONE', *, *, #225, .T. ) ; +#142 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ; +#143 = EDGE_CURVE ( 'NONE', #19, #522, #297, .T. ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 4.574307508062887900, -2.000000000000000000 ) ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 4.574307508062887900, -2.000000000000000000 ) ) ; +#146 = EDGE_CURVE ( 'NONE', #327, #12, #449, .T. ) ; +#147 = ORIENTED_EDGE ( 'NONE', *, *, #22, .F. ) ; +#148 = EDGE_CURVE ( 'NONE', #535, #522, #445, .T. ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 6.250000000000000000, 2.500000000000000000 ) ) ; +#150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#151 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#152 = AXIS2_PLACEMENT_3D ( 'NONE', #21, #274, #49 ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( -4.699999999999983300, 3.750000000000000400, 2.000000000000000000 ) ) ; +#154 = DIRECTION ( 'NONE', ( -1.734723475976807300E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#155 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#156 = ORIENTED_EDGE ( 'NONE', *, *, #505, .T. ) ; +#157 = SECURITY_CLASSIFICATION ( '', '', #500 ) ; +#158 = MECHANICAL_CONTEXT ( 'NONE', #237, 'mechanical' ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 4.574307508062887900, 2.000000000000000000 ) ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000001100, -2.000000000000000000 ) ) ; +#161 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#162 = EDGE_CURVE ( 'NONE', #502, #19, #437, .T. ) ; +#163 = ORIENTED_EDGE ( 'NONE', *, *, #148, .T. ) ; +#164 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#165 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Lock', ( #90, #519 ), #203 ) ; +#166 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#167 = ORIENTED_EDGE ( 'NONE', *, *, #283, .F. ) ; +#168 = VERTEX_POINT ( 'NONE', #107 ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 2.000000000000000000 ) ) ; +#170 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #200, #236, #293, #58 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#171 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, 3.593145750507617200, 2.000000000000000000 ) ) ; +#172 = LINE ( 'NONE', #1, #446 ) ; +#173 = VERTEX_POINT ( 'NONE', #266 ) ; +#174 = ORIENTED_EDGE ( 'NONE', *, *, #283, .T. ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, -2.500000000000000000 ) ) ; +#176 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#177 = EDGE_CURVE ( 'NONE', #501, #522, #430, .T. ) ; +#178 = ORIENTED_EDGE ( 'NONE', *, *, #22, .T. ) ; +#179 = ORIENTED_EDGE ( 'NONE', *, *, #133, .F. ) ; +#180 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#181 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #145, #220 ), + ( #20, #134 ), + ( #262, #38 ), + ( #307, #69 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.9479432750802676600, 0.9479432750802676600), + ( 0.9479432750802676600, 0.9479432750802676600), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#182 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 1.250000000000000200, -2.500000000000000000 ) ) ; +#183 = APPROVAL ( #248, 'UNSPECIFIED' ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#185 = APPROVAL ( #387, 'UNSPECIFIED' ) ; +#186 = VERTEX_POINT ( 'NONE', #374 ) ; +#187 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 4.574307508062887900, 2.000000000000000000 ) ) ; +#189 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #285, .NOT_KNOWN. ) ; +#190 = ORIENTED_EDGE ( 'NONE', *, *, #477, .F. ) ; +#191 = ORIENTED_EDGE ( 'NONE', *, *, #225, .F. ) ; +#192 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#193 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #226, #320, #79, #368 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 5.487582353695051700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9479432750802676600, 0.9479432750802676600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#194 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ; +#195 = EDGE_CURVE ( 'NONE', #168, #347, #210, .T. ) ; +#196 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#197 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 4.574307508062887900, -2.501000000000000300 ) ) ; +#198 = EDGE_CURVE ( 'NONE', #206, #186, #429, .T. ) ; +#199 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000001100, -2.000000000000000000 ) ) ; +#201 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#202 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #440, #164 ) ; +#203 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #135 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #155, #490, #196 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#204 = ORIENTED_EDGE ( 'NONE', *, *, #317, .T. ) ; +#205 = APPROVAL_DATE_TIME ( #207, #183 ) ; +#206 = VERTEX_POINT ( 'NONE', #247 ) ; +#207 = DATE_AND_TIME ( #209, #211 ) ; +#208 = PLANE ( 'NONE', #16 ) ; +#209 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#210 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #41, #140, #483, #188 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 0.7956029534845348000 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9479432750802676600, 0.9479432750802676600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#211 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #214 ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 6.250000000000000000, 2.500000000000030200 ) ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( 2.964466094067261400, 5.249999999999999100, 2.000000000000000000 ) ) ; +#214 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#215 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ; +#216 = APPROVAL_PERSON_ORGANIZATION ( #218, #183, #32 ) ; +#217 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ; +#218 = PERSON_AND_ORGANIZATION ( #126, #289 ) ; +#219 = DATE_AND_TIME ( #222, #224 ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 4.574307508062887900, 2.000000000000000000 ) ) ; +#221 = PLANE ( 'NONE', #152 ) ; +#222 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#223 = ORIENTED_EDGE ( 'NONE', *, *, #424, .F. ) ; +#224 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #229 ) ; +#225 = EDGE_CURVE ( 'NONE', #12, #534, #441, .T. ) ; +#226 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 4.574307508062887900, -2.000000000000000000 ) ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 1.250000000000000200, 2.500000000000000000 ) ) ; +#228 = ORIENTED_EDGE ( 'NONE', *, *, #198, .F. ) ; +#229 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#230 = PERSON_AND_ORGANIZATION ( #126, #289 ) ; +#231 = PERSON_AND_ORGANIZATION ( #126, #289 ) ; +#232 = PERSON_AND_ORGANIZATION ( #126, #289 ) ; +#233 = EDGE_CURVE ( 'NONE', #313, #410, #420, .T. ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 1.250000000000001100, -2.000000000000000000 ) ) ; +#235 = PLANE ( 'NONE', #271 ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, 3.593145750507617200, -2.000000000000000000 ) ) ; +#237 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#238 = APPROVAL_DATE_TIME ( #241, #185 ) ; +#239 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#240 = ORIENTED_EDGE ( 'NONE', *, *, #277, .T. ) ; +#241 = DATE_AND_TIME ( #243, #249 ) ; +#242 = EDGE_LOOP ( 'NONE', ( #228, #381, #50, #395 ) ) ; +#243 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#244 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 1.250000000000000200, -2.500000000000000000 ) ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -1.249999999999999800, 2.500000000000000000 ) ) ; +#246 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ; +#248 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#249 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #251 ) ; +#250 = PLANE ( 'NONE', #202 ) ; +#251 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#252 = APPROVAL_PERSON_ORGANIZATION ( #253, #185, #127 ) ; +#253 = PERSON_AND_ORGANIZATION ( #126, #289 ) ; +#254 = EDGE_LOOP ( 'NONE', ( #77, #282, #372, #120 ) ) ; +#255 = DATE_AND_TIME ( #256, #259 ) ; +#256 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -2.000000000000000000 ) ) ; +#258 = EDGE_CURVE ( 'NONE', #206, #313, #385, .T. ) ; +#259 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #260 ) ; +#260 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#261 = PERSON_AND_ORGANIZATION ( #126, #289 ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( 2.453554596516420700, 6.000000000000002700, -2.000000000000000400 ) ) ; +#263 = EDGE_CURVE ( 'NONE', #34, #68, #413, .T. ) ; +#264 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 2.000000000000000000 ) ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ; +#267 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #255, #93, ( #51 ) ) ; +#268 = APPROVAL_DATE_TIME ( #270, #11 ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( -2.000000000000000000, 3.750000000000000400, -1.999999999999999600 ) ) ; +#270 = DATE_AND_TIME ( #272, #273 ) ; +#271 = AXIS2_PLACEMENT_3D ( 'NONE', #287, #57, #333 ) ; +#272 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#273 = LOCAL_TIME ( 15, 9, 33.00000000000000000, #276 ) ; +#274 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#275 = ORIENTED_EDGE ( 'NONE', *, *, #263, .T. ) ; +#276 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#277 = EDGE_CURVE ( 'NONE', #85, #327, #406, .T. ) ; +#278 = APPROVAL_PERSON_ORGANIZATION ( #279, #11, #61 ) ; +#279 = PERSON_AND_ORGANIZATION ( #126, #289 ) ; +#280 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#281 = CARTESIAN_POINT ( 'NONE', ( 0.03553390593273781500, 5.249999999999999100, -2.000000000000000000 ) ) ; +#282 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ; +#283 = EDGE_CURVE ( 'NONE', #534, #124, #408, .T. ) ; +#284 = PERSON_AND_ORGANIZATION ( #126, #289 ) ; +#285 = PRODUCT ( 'Lock', 'Lock', '', ( #158 ) ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( -0.8233520233941794600, 5.180977768534854800, 1.999999999999999600 ) ) ; +#287 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.249999999999999800, 0.0000000000000000000 ) ) ; +#288 = ORIENTED_EDGE ( 'NONE', *, *, #103, .F. ) ; +#289 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#290 = SHAPE_DEFINITION_REPRESENTATION ( #306, #165 ) ; +#291 = ORIENTED_EDGE ( 'NONE', *, *, #277, .F. ) ; +#292 = DIRECTION ( 'NONE', ( 0.5144957554275252400, 0.0000000000000000000, -0.8574929257125449800 ) ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( 2.964466094067261400, 5.249999999999999100, -2.000000000000000000 ) ) ; +#294 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #14, #264 ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 6.250000000000000000, 2.000000000000000000 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 1.250000000000000200, -2.501000000000000300 ) ) ; +#297 = LINE ( 'NONE', #87, #444 ) ; +#298 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#299 = ORIENTED_EDGE ( 'NONE', *, *, #338, .T. ) ; +#300 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -1.249999999999999800, -2.500000000000000000 ) ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( -2.000000000000000000, 3.750000000000000400, 2.501000000000000300 ) ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 0.0000000000000000000, -2.501000000000000300 ) ) ; +#303 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ; +#304 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#305 = VERTEX_POINT ( 'NONE', #175 ) ; +#306 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #51 ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ; +#308 = FACE_OUTER_BOUND ( 'NONE', #530, .T. ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999997300, 6.250000000000000000, -2.000000000000000000 ) ) ; +#310 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#311 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #489, #25, #76, #418 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#312 = FACE_OUTER_BOUND ( 'NONE', #493, .T. ) ; +#313 = VERTEX_POINT ( 'NONE', #43 ) ; +#314 = FACE_OUTER_BOUND ( 'NONE', #91, .T. ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.750000000000000400, -1.999999999999999600 ) ) ; +#316 = FACE_OUTER_BOUND ( 'NONE', #59, .T. ) ; +#317 = EDGE_CURVE ( 'NONE', #501, #502, #394, .T. ) ; +#318 = FACE_OUTER_BOUND ( 'NONE', #532, .T. ) ; +#319 = FACE_OUTER_BOUND ( 'NONE', #457, .T. ) ; +#320 = CARTESIAN_POINT ( 'NONE', ( 3.332650799042643700, 5.498671657747176600, -2.000000000000000000 ) ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, 2.500000000000000000 ) ) ; +#322 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #261, #339, ( #51 ) ) ; +#323 = FACE_OUTER_BOUND ( 'NONE', #254, .T. ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258579600, 3.750000000000000400, 2.000000000000000000 ) ) ; +#325 = ORIENTED_EDGE ( 'NONE', *, *, #317, .F. ) ; +#326 = LINE ( 'NONE', #112, #346 ) ; +#327 = VERTEX_POINT ( 'NONE', #458 ) ; +#328 = AXIS2_PLACEMENT_3D ( 'NONE', #529, #533, #70 ) ; +#329 = FACE_OUTER_BOUND ( 'NONE', #242, .T. ) ; +#330 = CARTESIAN_POINT ( 'NONE', ( -2.299999999999992300, 1.250000000000000200, -1.999999999999999600 ) ) ; +#331 = FACE_OUTER_BOUND ( 'NONE', #523, .T. ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, 2.000000000000000000 ) ) ; +#333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#334 = FACE_OUTER_BOUND ( 'NONE', #364, .T. ) ; +#335 = FACE_OUTER_BOUND ( 'NONE', #371, .T. ) ; +#336 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #285 ) ) ; +#337 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, -2.500000000000000000 ) ) ; +#338 = EDGE_CURVE ( 'NONE', #12, #390, #396, .T. ) ; +#339 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999994400, 3.593145750507619900, -2.000000000000000000 ) ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 6.250000000000000000, -2.501000000000000300 ) ) ; +#342 = EDGE_CURVE ( 'NONE', #344, #68, #404, .T. ) ; +#343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#344 = VERTEX_POINT ( 'NONE', #92 ) ; +#345 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ; +#346 = VECTOR ( 'NONE', #180, 1000.000000000000000 ) ; +#347 = VERTEX_POINT ( 'NONE', #159 ) ; +#348 = LINE ( 'NONE', #393, #350 ) ; +#349 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#350 = VECTOR ( 'NONE', #136, 1000.000000000000000 ) ; +#351 = AXIS2_PLACEMENT_3D ( 'NONE', #301, #63, #343 ) ; +#352 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, -2.000000000000000000 ) ) ; +#353 = FACE_OUTER_BOUND ( 'NONE', #426, .T. ) ; +#354 = FACE_OUTER_BOUND ( 'NONE', #55, .T. ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999993300, 3.593145750507620300, -2.000000000000000000 ) ) ; +#356 = ORIENTED_EDGE ( 'NONE', *, *, #138, .T. ) ; +#357 = FACE_BOUND ( 'NONE', #531, .T. ) ; +#358 = ORIENTED_EDGE ( 'NONE', *, *, #138, .F. ) ; +#359 = FACE_OUTER_BOUND ( 'NONE', #398, .T. ) ; +#360 = VECTOR ( 'NONE', #367, 1000.000000000000000 ) ; +#361 = EDGE_CURVE ( 'NONE', #68, #206, #170, .T. ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258552700, 3.749999999999977800, 2.000000000000000000 ) ) ; +#363 = PLANE ( 'NONE', #37 ) ; +#364 = EDGE_LOOP ( 'NONE', ( #35, #462, #526, #94 ) ) ; +#365 = FACE_OUTER_BOUND ( 'NONE', #64, .T. ) ; +#366 = LINE ( 'NONE', #116, #360 ) ; +#367 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, -2.000000000000000000 ) ) ; +#369 = VECTOR ( 'NONE', #122, 1000.000000000000000 ) ; +#370 = EDGE_CURVE ( 'NONE', #173, #502, #515, .T. ) ; +#371 = EDGE_LOOP ( 'NONE', ( #132, #460, #223, #484 ) ) ; +#372 = ORIENTED_EDGE ( 'NONE', *, *, #103, .T. ) ; +#373 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, 2.500000000000000000 ) ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 1.999999999999999600 ) ) ; +#375 = LINE ( 'NONE', #411, #369 ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999996900, 6.000000000000000000, 1.999999999999999600 ) ) ; +#377 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#378 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #237 ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, -2.500000000000000000 ) ) ; +#380 = VECTOR ( 'NONE', #154, 1000.000000000000000 ) ; +#381 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ; +#382 = VECTOR ( 'NONE', #125, 1000.000000000000000 ) ; +#383 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ; +#384 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#385 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #40, #72, #355, #106 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#386 = EDGE_CURVE ( 'NONE', #313, #18, #375, .T. ) ; +#387 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, -2.000000000000000000 ) ) ; +#389 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ; +#390 = VERTEX_POINT ( 'NONE', #468 ) ; +#391 = VECTOR ( 'NONE', #60, 1000.000000000000000 ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -2.500000000000000000 ) ) ; +#393 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, 0.0000000000000000000, 2.500000000000000000 ) ) ; +#394 = LINE ( 'NONE', #269, #391 ) ; +#395 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ; +#396 = LINE ( 'NONE', #337, #382 ) ; +#397 = VECTOR ( 'NONE', #176, 1000.000000000000000 ) ; +#398 = EDGE_LOOP ( 'NONE', ( #492, #525, #419, #167 ) ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( -0.8233520233941782300, 5.180977768534855700, -1.999999999999999800 ) ) ; +#400 = CC_DESIGN_SECURITY_CLASSIFICATION ( #157, ( #189 ) ) ; +#401 = VECTOR ( 'NONE', #499, 1000.000000000000000 ) ; +#402 = VECTOR ( 'NONE', #405, 1000.000000000000000 ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 3.750000000000000400, 2.500000000000030200 ) ) ; +#404 = LINE ( 'NONE', #296, #401 ) ; +#405 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#406 = LINE ( 'NONE', #300, #402 ) ; +#407 = EDGE_CURVE ( 'NONE', #19, #168, #463, .T. ) ; +#408 = LINE ( 'NONE', #341, #397 ) ; +#409 = ORIENTED_EDGE ( 'NONE', *, *, #338, .F. ) ; +#410 = VERTEX_POINT ( 'NONE', #330 ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000000200, -2.501000000000000300 ) ) ; +#412 = VECTOR ( 'NONE', #423, 1000.000000000000000 ) ; +#413 = LINE ( 'NONE', #309, #435 ) ; +#414 = CLOSED_SHELL ( 'NONE', ( #506, #478, #518, #480, #498, #513, #507, #487, #520, #521, #472, #469, #474, #514, #524 ) ) ; +#415 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#416 = VECTOR ( 'NONE', #31, 1000.000000000000000 ) ; +#417 = ORIENTED_EDGE ( 'NONE', *, *, #108, .T. ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 1.999999999999999600 ) ) ; +#419 = ORIENTED_EDGE ( 'NONE', *, *, #477, .T. ) ; +#420 = LINE ( 'NONE', #160, #412 ) ; +#421 = VECTOR ( 'NONE', #151, 1000.000000000000000 ) ; +#422 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999996400, -1.249999999999999800, -2.500000000000000000 ) ) ; +#423 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#424 = EDGE_CURVE ( 'NONE', #18, #186, #311, .T. ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, -2.500000000000000000 ) ) ; +#426 = EDGE_LOOP ( 'NONE', ( #190, #417, #178, #356 ) ) ; +#427 = VECTOR ( 'NONE', #82, 1000.000000000000000 ) ; +#428 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ; +#429 = LINE ( 'NONE', #119, #421 ) ; +#430 = LINE ( 'NONE', #403, #427 ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( -4.699999999999983300, 1.250000000000001100, 2.000000000000000000 ) ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( -2.794117647058814500, 1.250000000000000200, -1.176470588235292600 ) ) ; +#433 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#434 = VECTOR ( 'NONE', #310, 1000.000000000000000 ) ; +#435 = VECTOR ( 'NONE', #109, 1000.000000000000000 ) ; +#436 = VECTOR ( 'NONE', #433, 1000.000000000000000 ) ; +#437 = LINE ( 'NONE', #29, #434 ) ; +#438 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#439 = VECTOR ( 'NONE', #5, 1000.000000000000000 ) ; +#440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#441 = LINE ( 'NONE', #7, #416 ) ; +#442 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ; +#443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#444 = VECTOR ( 'NONE', #4, 1000.000000000000000 ) ; +#445 = LINE ( 'NONE', #494, #436 ) ; +#446 = VECTOR ( 'NONE', #384, 1000.000000000000000 ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 5.249999999999999100, 2.000000000000000000 ) ) ; +#448 = EDGE_CURVE ( 'NONE', #18, #535, #366, .T. ) ; +#449 = LINE ( 'NONE', #244, #439 ) ; +#450 = CARTESIAN_POINT ( 'NONE', ( 0.2599457969576740000, 5.999999999999998200, -1.999999999999999800 ) ) ; +#451 = VECTOR ( 'NONE', #280, 1000.000000000000000 ) ; +#452 = VECTOR ( 'NONE', #150, 1000.000000000000000 ) ; +#453 = VECTOR ( 'NONE', #239, 1000.000000000000000 ) ; +#454 = CARTESIAN_POINT ( 'NONE', ( 3.999999999999998200, 3.593145750507617200, -2.000000000000000000 ) ) ; +#455 = LINE ( 'NONE', #197, #451 ) ; +#456 = EDGE_CURVE ( 'NONE', #34, #173, #193, .T. ) ; +#457 = EDGE_LOOP ( 'NONE', ( #10, #156, #217, #442 ) ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, -1.249999999999999800, -2.500000000000000000 ) ) ; +#459 = VECTOR ( 'NONE', #292, 1000.000000000000000 ) ; +#460 = ORIENTED_EDGE ( 'NONE', *, *, #198, .T. ) ; +#461 = LINE ( 'NONE', #2, #452 ) ; +#462 = ORIENTED_EDGE ( 'NONE', *, *, #370, .T. ) ; +#463 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #56, #286, #83, #376 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 5.266650814837012400, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9157260586911510900, 0.9157260586911510900, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#464 = VECTOR ( 'NONE', #377, 1000.000000000000000 ) ; +#465 = LINE ( 'NONE', #432, #459 ) ; +#466 = AXIS2_PLACEMENT_3D ( 'NONE', #182, #114, #415 ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( -1.476012130258552700, 3.749999999999977800, -2.000000000000000000 ) ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 6.250000000000000000, 2.500000000000000000 ) ) ; +#469 = ADVANCED_FACE ( 'NONE', ( #359, #357 ), #479, .F. ) ; +#470 = PLANE ( 'NONE', #328 ) ; +#471 = LINE ( 'NONE', #422, #464 ) ; +#472 = ADVANCED_FACE ( 'NONE', ( #365 ), #53, .F. ) ; +#473 = VECTOR ( 'NONE', #123, 1000.000000000000000 ) ; +#474 = ADVANCED_FACE ( 'NONE', ( #354 ), #208, .T. ) ; +#475 = LINE ( 'NONE', #379, #473 ) ; +#476 = VECTOR ( 'NONE', #187, 1000.000000000000000 ) ; +#477 = EDGE_CURVE ( 'NONE', #44, #124, #348, .T. ) ; +#478 = ADVANCED_FACE ( 'NONE', ( #335 ), #17, .F. ) ; +#479 = PLANE ( 'NONE', #42 ) ; +#480 = ADVANCED_FACE ( 'NONE', ( #331 ), #33, .F. ) ; +#481 = LINE ( 'NONE', #227, #476 ) ; +#482 = LINE ( 'NONE', #321, #453 ) ; +#483 = CARTESIAN_POINT ( 'NONE', ( 3.332650799042643700, 5.498671657747176600, 1.999999999999999600 ) ) ; +#484 = ORIENTED_EDGE ( 'NONE', *, *, #386, .F. ) ; +#485 = LINE ( 'NONE', #295, #380 ) ; +#486 = LINE ( 'NONE', #118, #491 ) ; +#487 = ADVANCED_FACE ( 'NONE', ( #353 ), #250, .T. ) ; +#488 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#489 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000000, 1.250000000000001100, 2.000000000000000000 ) ) ; +#490 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#491 = VECTOR ( 'NONE', #23, 1000.000000000000000 ) ; +#492 = ORIENTED_EDGE ( 'NONE', *, *, #71, .T. ) ; +#493 = EDGE_LOOP ( 'NONE', ( #99, #303, #428, #215, #495, #496, #503, #504 ) ) ; +#494 = CARTESIAN_POINT ( 'NONE', ( -4.699999999999983300, 6.250000000000000000, 2.000000000000000000 ) ) ; +#495 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ; +#496 = ORIENTED_EDGE ( 'NONE', *, *, #143, .T. ) ; +#497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#498 = ADVANCED_FACE ( 'NONE', ( #329 ), #527, .F. ) ; +#499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#500 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#501 = VERTEX_POINT ( 'NONE', #96 ) ; +#502 = VERTEX_POINT ( 'NONE', #130 ) ; +#503 = ORIENTED_EDGE ( 'NONE', *, *, #148, .F. ) ; +#504 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ; +#505 = EDGE_CURVE ( 'NONE', #173, #168, #326, .T. ) ; +#506 = ADVANCED_FACE ( 'NONE', ( #319 ), #181, .T. ) ; +#507 = ADVANCED_FACE ( 'NONE', ( #316 ), #516, .T. ) ; +#508 = DESIGN_CONTEXT ( 'detailed design', #246, 'design' ) ; +#509 = ORIENTED_EDGE ( 'NONE', *, *, #133, .T. ) ; +#510 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ; +#511 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ; +#512 = ORIENTED_EDGE ( 'NONE', *, *, #101, .F. ) ; +#513 = ADVANCED_FACE ( 'NONE', ( #334 ), #102, .T. ) ; +#514 = ADVANCED_FACE ( 'NONE', ( #312 ), #221, .T. ) ; +#515 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #194, #28, #47, #315 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.0000000000000000000, 1.016534492342573600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9157260586911510900, 0.9157260586911510900, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#516 = PLANE ( 'NONE', #294 ) ; +#517 = CARTESIAN_POINT ( 'NONE', ( 2.964466094067261400, 5.249999999999999100, -2.000000000000000000 ) ) ; +#518 = ADVANCED_FACE ( 'NONE', ( #323 ), #75, .T. ) ; +#519 = AXIS2_PLACEMENT_3D ( 'NONE', #184, #497, #199 ) ; +#520 = ADVANCED_FACE ( 'NONE', ( #314 ), #470, .T. ) ; +#521 = ADVANCED_FACE ( 'NONE', ( #318 ), #363, .T. ) ; +#522 = VERTEX_POINT ( 'NONE', #153 ) ; +#523 = EDGE_LOOP ( 'NONE', ( #54, #74, #325, #3 ) ) ; +#524 = ADVANCED_FACE ( 'NONE', ( #308 ), #235, .F. ) ; +#525 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ; +#526 = ORIENTED_EDGE ( 'NONE', *, *, #162, .T. ) ; +#527 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #100, #139 ), + ( #454, #171 ), + ( #517, #213 ), + ( #15, #265 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.8047378541243649400, 0.8047378541243649400), + ( 0.8047378541243649400, 0.8047378541243649400), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#528 = CARTESIAN_POINT ( 'NONE', ( -0.8233520233941782300, 5.180977768534855700, 1.999999999999999800 ) ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 1.250000000000000200, -2.500000000000000000 ) ) ; +#530 = EDGE_LOOP ( 'NONE', ( #511, #512, #291, #45 ) ) ; +#531 = EDGE_LOOP ( 'NONE', ( #98, #131, #510, #389 ) ) ; +#532 = EDGE_LOOP ( 'NONE', ( #174, #358, #409, #141 ) ) ; +#533 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#534 = VERTEX_POINT ( 'NONE', #121 ) ; +#535 = VERTEX_POINT ( 'NONE', #431 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Long_Hammer_Slide_Pin.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Long_Hammer_Slide_Pin.step new file mode 100644 index 0000000..f3592a8 --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Long_Hammer_Slide_Pin.step @@ -0,0 +1,708 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Long_Hammer_Slide_Pin.STEP', + '2013-11-14T05:09:22', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = ORIENTED_EDGE ( 'NONE', *, *, #546, .F. ) ; +#2 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4 = AXIS2_PLACEMENT_3D ( 'NONE', #241, #622, #56 ) ; +#5 = CIRCLE ( 'NONE', #44, 1.250000000000000200 ) ; +#6 = AXIS2_PLACEMENT_3D ( 'NONE', #379, #124, #505 ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#8 = TOROIDAL_SURFACE ( 'NONE', #40, 3.750000000000000000, 1.250000000000000000 ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#10 = ORIENTED_EDGE ( 'NONE', *, *, #584, .F. ) ; +#11 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #300 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #612, #283, #669 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#12 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#15 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#16 = DATE_AND_TIME ( #331, #404 ) ; +#17 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18 = EDGE_LOOP ( 'NONE', ( #163, #111 ) ) ; +#19 = EDGE_LOOP ( 'NONE', ( #609, #177, #595, #86 ) ) ; +#20 = EDGE_CURVE ( 'NONE', #660, #656, #643, .T. ) ; +#21 = AXIS2_PLACEMENT_3D ( 'NONE', #416, #410, #406 ) ; +#22 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#23 = ORIENTED_EDGE ( 'NONE', *, *, #109, .T. ) ; +#24 = EDGE_LOOP ( 'NONE', ( #67, #95, #245, #640 ) ) ; +#25 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#26 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #78 ) ; +#27 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 3.827021247335477800E-016, 2.499999999999999600 ) ) ; +#28 = CIRCLE ( 'NONE', #75, 1.250000000000000200 ) ; +#29 = EDGE_CURVE ( 'NONE', #287, #440, #160, .T. ) ; +#30 = FACE_OUTER_BOUND ( 'NONE', #18, .T. ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#32 = APPROVAL_ROLE ( '' ) ; +#33 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#35 = EDGE_LOOP ( 'NONE', ( #600, #498, #478, #260 ) ) ; +#36 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#37 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#38 = CIRCLE ( 'NONE', #183, 5.000000000000000000 ) ; +#39 = ORIENTED_EDGE ( 'NONE', *, *, #282, .F. ) ; +#40 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #80, #455 ) ; +#41 = ORIENTED_EDGE ( 'NONE', *, *, #302, .F. ) ; +#42 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#43 = EDGE_CURVE ( 'NONE', #468, #548, #246, .T. ) ; +#44 = AXIS2_PLACEMENT_3D ( 'NONE', #205, #558, #236 ) ; +#45 = DATE_AND_TIME ( #598, #116 ) ; +#46 = CC_DESIGN_APPROVAL ( #363, ( #444 ) ) ; +#47 = VERTEX_POINT ( 'NONE', #482 ) ; +#48 = EDGE_CURVE ( 'NONE', #47, #259, #377, .T. ) ; +#49 = DATE_AND_TIME ( #97, #605 ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#51 = AXIS2_PLACEMENT_3D ( 'NONE', #261, #258, #209 ) ; +#52 = ORIENTED_EDGE ( 'NONE', *, *, #616, .F. ) ; +#53 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ; +#54 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#55 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#56 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#57 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#58 = VECTOR ( 'NONE', #132, 1000.000000000000000 ) ; +#59 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#60 = ORIENTED_EDGE ( 'NONE', *, *, #636, .T. ) ; +#61 = CIRCLE ( 'NONE', #147, 1.250000000000000200 ) ; +#62 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#63 = EDGE_CURVE ( 'NONE', #660, #665, #535, .T. ) ; +#64 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#65 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#66 = DATE_AND_TIME ( #531, #194 ) ; +#67 = ORIENTED_EDGE ( 'NONE', *, *, #371, .T. ) ; +#68 = VECTOR ( 'NONE', #626, 1000.000000000000000 ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#70 = AXIS2_PLACEMENT_3D ( 'NONE', #581, #525, #304 ) ; +#71 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000400, -1.734723475976807400E-014, 0.0000000000000000000 ) ) ; +#72 = EDGE_CURVE ( 'NONE', #47, #427, #359, .T. ) ; +#73 = LINE ( 'NONE', #516, #58 ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#75 = AXIS2_PLACEMENT_3D ( 'NONE', #399, #92, #473 ) ; +#76 = CIRCLE ( 'NONE', #112, 1.250000000000000200 ) ; +#77 = VERTEX_POINT ( 'NONE', #104 ) ; +#78 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#80 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#81 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#82 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#83 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#85 = AXIS2_PLACEMENT_3D ( 'NONE', #421, #113, #497 ) ; +#86 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#88 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#89 = EDGE_CURVE ( 'NONE', #221, #427, #666, .T. ) ; +#90 = APPROVAL ( #339, 'UNSPECIFIED' ) ; +#91 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#92 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#93 = CIRCLE ( 'NONE', #294, 1.250000000000000200 ) ; +#94 = ORIENTED_EDGE ( 'NONE', *, *, #460, .T. ) ; +#95 = ORIENTED_EDGE ( 'NONE', *, *, #642, .T. ) ; +#96 = EDGE_CURVE ( 'NONE', #569, #656, #685, .T. ) ; +#97 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#98 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#99 = CIRCLE ( 'NONE', #264, 1.250000000000000200 ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#101 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#102 = EDGE_LOOP ( 'NONE', ( #103, #356, #429, #459 ) ) ; +#103 = ORIENTED_EDGE ( 'NONE', *, *, #63, .T. ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#105 = CIRCLE ( 'NONE', #332, 5.000000000000000000 ) ; +#106 = CIRCLE ( 'NONE', #361, 3.750000000000000000 ) ; +#107 = CIRCLE ( 'NONE', #225, 1.250000000000000200 ) ; +#108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#109 = EDGE_CURVE ( 'NONE', #326, #207, #136, .T. ) ; +#110 = ORIENTED_EDGE ( 'NONE', *, *, #460, .F. ) ; +#111 = ORIENTED_EDGE ( 'NONE', *, *, #335, .T. ) ; +#112 = AXIS2_PLACEMENT_3D ( 'NONE', #393, #88, #466 ) ; +#113 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#114 = TOROIDAL_SURFACE ( 'NONE', #551, 3.750000000000000000, 1.250000000000000000 ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#116 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #222 ) ; +#117 = VERTEX_POINT ( 'NONE', #14 ) ; +#118 = AXIS2_PLACEMENT_3D ( 'NONE', #554, #178, #337 ) ; +#119 = ORIENTED_EDGE ( 'NONE', *, *, #383, .F. ) ; +#120 = AXIS2_PLACEMENT_3D ( 'NONE', #657, #325, #15 ) ; +#121 = CC_DESIGN_APPROVAL ( #90, ( #161 ) ) ; +#122 = VECTOR ( 'NONE', #57, 1000.000000000000000 ) ; +#123 = CIRCLE ( 'NONE', #120, 5.000000000000000000 ) ; +#124 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#125 = ORIENTED_EDGE ( 'NONE', *, *, #256, .T. ) ; +#126 = AXIS2_PLACEMENT_3D ( 'NONE', #263, #645, #311 ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#128 = MECHANICAL_CONTEXT ( 'NONE', #78, 'mechanical' ) ; +#129 = EDGE_CURVE ( 'NONE', #287, #603, #226, .T. ) ; +#130 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#132 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#133 = FACE_OUTER_BOUND ( 'NONE', #230, .T. ) ; +#134 = EDGE_LOOP ( 'NONE', ( #314, #661, #203, #41 ) ) ; +#135 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#136 = CIRCLE ( 'NONE', #599, 3.750000000000000000 ) ; +#137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#140 = AXIS2_PLACEMENT_3D ( 'NONE', #667, #231, #557 ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#142 = LINE ( 'NONE', #368, #122 ) ; +#143 = AXIS2_PLACEMENT_3D ( 'NONE', #679, #291, #17 ) ; +#144 = ORIENTED_EDGE ( 'NONE', *, *, #511, .F. ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#146 = EDGE_CURVE ( 'NONE', #77, #586, #276, .T. ) ; +#147 = AXIS2_PLACEMENT_3D ( 'NONE', #248, #632, #295 ) ; +#148 = VERTEX_POINT ( 'NONE', #9 ) ; +#149 = FACE_OUTER_BOUND ( 'NONE', #196, .T. ) ; +#150 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#151 = EDGE_LOOP ( 'NONE', ( #629, #490, #646, #502 ) ) ; +#152 = CIRCLE ( 'NONE', #501, 3.750000000000000000 ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#154 = AXIS2_PLACEMENT_3D ( 'NONE', #655, #165, #542 ) ; +#155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#157 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#158 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#159 = AXIS2_PLACEMENT_3D ( 'NONE', #651, #318, #12 ) ; +#160 = CIRCLE ( 'NONE', #21, 1.250000000000000200 ) ; +#161 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #296, .NOT_KNOWN. ) ; +#162 = ORIENTED_EDGE ( 'NONE', *, *, #422, .T. ) ; +#163 = ORIENTED_EDGE ( 'NONE', *, *, #321, .T. ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#165 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 5.357829746269669600E-016, 3.750000000000000000 ) ) ; +#169 = ORIENTED_EDGE ( 'NONE', *, *, #442, .T. ) ; +#170 = CIRCLE ( 'NONE', #433, 2.500000000000000400 ) ; +#171 = EDGE_CURVE ( 'NONE', #388, #148, #289, .T. ) ; +#172 = CIRCLE ( 'NONE', #298, 5.000000000000000000 ) ; +#173 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#174 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #444 ) ; +#175 = ORIENTED_EDGE ( 'NONE', *, *, #499, .F. ) ; +#176 = AXIS2_PLACEMENT_3D ( 'NONE', #411, #101, #484 ) ; +#177 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ; +#178 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#179 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Long_Hammer_Slide_Pin', ( #683, #494 ), #11 ) ; +#180 = AXIS2_PLACEMENT_3D ( 'NONE', #36, #135, #244 ) ; +#181 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#182 = EDGE_CURVE ( 'NONE', #548, #468, #152, .T. ) ; +#183 = AXIS2_PLACEMENT_3D ( 'NONE', #578, #250, #635 ) ; +#184 = CYLINDRICAL_SURFACE ( 'NONE', #662, 5.000000000000000000 ) ; +#185 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#187 = VERTEX_POINT ( 'NONE', #164 ) ; +#188 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#189 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000001100, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#192 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #524, #199 ) ; +#193 = PERSON_AND_ORGANIZATION ( #580, #98 ) ; +#194 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #672 ) ; +#195 = ORIENTED_EDGE ( 'NONE', *, *, #96, .F. ) ; +#196 = EDGE_LOOP ( 'NONE', ( #366, #94, #351, #232 ) ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 3.827021247335478800E-016, 2.500000000000000400 ) ) ; +#198 = AXIS2_PLACEMENT_3D ( 'NONE', #362, #320, #317 ) ; +#199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#200 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #372, #81, ( #161 ) ) ; +#201 = FACE_OUTER_BOUND ( 'NONE', #647, .T. ) ; +#202 = CYLINDRICAL_SURFACE ( 'NONE', #262, 5.000000000000000000 ) ; +#203 = ORIENTED_EDGE ( 'NONE', *, *, #204, .F. ) ; +#204 = EDGE_CURVE ( 'NONE', #117, #148, #172, .T. ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 4.592425496802575000E-016, 3.750000000000000900 ) ) ; +#206 = DATE_AND_TIME ( #65, #344 ) ; +#207 = VERTEX_POINT ( 'NONE', #523 ) ; +#208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#209 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#210 = ORIENTED_EDGE ( 'NONE', *, *, #182, .F. ) ; +#211 = EDGE_LOOP ( 'NONE', ( #39, #594, #437, #195 ) ) ; +#212 = AXIS2_PLACEMENT_3D ( 'NONE', #504, #378, #229 ) ; +#213 = AXIS2_PLACEMENT_3D ( 'NONE', #686, #349, #42 ) ; +#214 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#215 = ORIENTED_EDGE ( 'NONE', *, *, #321, .F. ) ; +#216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#217 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #66, #514, ( #555 ) ) ; +#218 = TOROIDAL_SURFACE ( 'NONE', #212, 3.750000000000000000, 1.250000000000000000 ) ; +#219 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ; +#220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#221 = VERTEX_POINT ( 'NONE', #392 ) ; +#222 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#223 = AXIS2_PLACEMENT_3D ( 'NONE', #288, #674, #341 ) ; +#224 = VERTEX_POINT ( 'NONE', #197 ) ; +#225 = AXIS2_PLACEMENT_3D ( 'NONE', #395, #91, #471 ) ; +#226 = CIRCLE ( 'NONE', #233, 3.750000000000000000 ) ; +#227 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #628, #130, ( #555 ) ) ; +#228 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #193, #385, ( #161 ) ) ; +#229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#230 = EDGE_LOOP ( 'NONE', ( #279, #144, #668, #530 ) ) ; +#231 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#232 = ORIENTED_EDGE ( 'NONE', *, *, #499, .T. ) ; +#233 = AXIS2_PLACEMENT_3D ( 'NONE', #364, #54, #418 ) ; +#234 = CYLINDRICAL_SURFACE ( 'NONE', #348, 5.000000000000000000 ) ; +#235 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ; +#236 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ; +#237 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#238 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#239 = EDGE_CURVE ( 'NONE', #656, #468, #574, .T. ) ; +#240 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#241 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#242 = APPROVAL_DATE_TIME ( #49, #90 ) ; +#243 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#245 = ORIENTED_EDGE ( 'NONE', *, *, #182, .T. ) ; +#246 = CIRCLE ( 'NONE', #198, 3.750000000000000000 ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#248 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000001100, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#249 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#250 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#251 = FACE_OUTER_BOUND ( 'NONE', #275, .T. ) ; +#252 = AXIS2_PLACEMENT_3D ( 'NONE', #475, #253, #529 ) ; +#253 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#254 = ORIENTED_EDGE ( 'NONE', *, *, #664, .F. ) ; +#255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#256 = EDGE_CURVE ( 'NONE', #77, #676, #286, .T. ) ; +#257 = FACE_OUTER_BOUND ( 'NONE', #376, .T. ) ; +#258 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#259 = VERTEX_POINT ( 'NONE', #290 ) ; +#260 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#262 = AXIS2_PLACEMENT_3D ( 'NONE', #413, #157, #360 ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#264 = AXIS2_PLACEMENT_3D ( 'NONE', #34, #386, #82 ) ; +#265 = DESIGN_CONTEXT ( 'detailed design', #185, 'design' ) ; +#266 = TOROIDAL_SURFACE ( 'NONE', #118, 3.750000000000000000, 1.250000000000000000 ) ; +#267 = FACE_OUTER_BOUND ( 'NONE', #151, .T. ) ; +#268 = FACE_OUTER_BOUND ( 'NONE', #528, .T. ) ; +#269 = EDGE_LOOP ( 'NONE', ( #10, #556, #400, #235 ) ) ; +#270 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#271 = PERSON_AND_ORGANIZATION ( #580, #98 ) ; +#272 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#273 = EDGE_CURVE ( 'NONE', #259, #221, #654, .T. ) ; +#274 = FACE_OUTER_BOUND ( 'NONE', #35, .T. ) ; +#275 = EDGE_LOOP ( 'NONE', ( #492, #631, #125, #419 ) ) ; +#276 = CIRCLE ( 'NONE', #559, 5.000000000000000000 ) ; +#277 = EDGE_LOOP ( 'NONE', ( #367, #299, #162, #23 ) ) ; +#278 = FACE_OUTER_BOUND ( 'NONE', #678, .T. ) ; +#279 = ORIENTED_EDGE ( 'NONE', *, *, #604, .F. ) ; +#280 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #623, #342 ) ; +#281 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#282 = EDGE_CURVE ( 'NONE', #665, #569, #602, .T. ) ; +#283 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#285 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#286 = LINE ( 'NONE', #347, #374 ) ; +#287 = VERTEX_POINT ( 'NONE', #389 ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#289 = LINE ( 'NONE', #315, #68 ) ; +#290 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#291 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#292 = AXIS2_PLACEMENT_3D ( 'NONE', #59, #272, #659 ) ; +#293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#294 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #627, #293 ) ; +#295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#296 = PRODUCT ( 'Long_Hammer_Slide_Pin', 'Long_Hammer_Slide_Pin', '', ( #128 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#298 = AXIS2_PLACEMENT_3D ( 'NONE', #575, #249, #633 ) ; +#299 = ORIENTED_EDGE ( 'NONE', *, *, #479, .T. ) ; +#300 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #612, 'distance_accuracy_value', 'NONE'); +#301 = ORIENTED_EDGE ( 'NONE', *, *, #72, .F. ) ; +#302 = EDGE_CURVE ( 'NONE', #660, #117, #650, .T. ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#304 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#306 = ORIENTED_EDGE ( 'NONE', *, *, #422, .F. ) ; +#307 = TOROIDAL_SURFACE ( 'NONE', #126, 3.750000000000000000, 1.250000000000000000 ) ; +#308 = TOROIDAL_SURFACE ( 'NONE', #688, 3.750000000000000900, 1.250000000000000000 ) ; +#309 = EDGE_CURVE ( 'NONE', #224, #207, #617, .T. ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#312 = APPROVAL_PERSON_ORGANIZATION ( #464, #90, #32 ) ; +#313 = ORIENTED_EDGE ( 'NONE', *, *, #302, .T. ) ; +#314 = ORIENTED_EDGE ( 'NONE', *, *, #567, .F. ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#316 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #610, #281 ) ; +#317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#318 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#320 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#321 = EDGE_CURVE ( 'NONE', #676, #187, #644, .T. ) ; +#322 = EDGE_LOOP ( 'NONE', ( #254, #110 ) ) ; +#323 = ORIENTED_EDGE ( 'NONE', *, *, #584, .T. ) ; +#324 = CYLINDRICAL_SURFACE ( 'NONE', #140, 5.000000000000000000 ) ; +#325 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#326 = VERTEX_POINT ( 'NONE', #634 ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#328 = CIRCLE ( 'NONE', #176, 5.000000000000000000 ) ; +#329 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #173, #216 ) ; +#330 = PERSON_AND_ORGANIZATION ( #580, #98 ) ; +#331 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#332 = AXIS2_PLACEMENT_3D ( 'NONE', #189, #545, #137 ) ; +#333 = ORIENTED_EDGE ( 'NONE', *, *, #383, .T. ) ; +#334 = ORIENTED_EDGE ( 'NONE', *, *, #340, .T. ) ; +#335 = EDGE_CURVE ( 'NONE', #187, #676, #639, .T. ) ; +#336 = CC_DESIGN_APPROVAL ( #526, ( #555 ) ) ; +#337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#338 = FACE_OUTER_BOUND ( 'NONE', #277, .T. ) ; +#339 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#340 = EDGE_CURVE ( 'NONE', #440, #224, #649, .T. ) ; +#341 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#342 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#343 = APPROVAL_DATE_TIME ( #206, #526 ) ; +#344 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #485 ) ; +#345 = ORIENTED_EDGE ( 'NONE', *, *, #677, .T. ) ; +#346 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ; +#347 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#348 = AXIS2_PLACEMENT_3D ( 'NONE', #50, #589, #208 ) ; +#349 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#350 = ORIENTED_EDGE ( 'NONE', *, *, #596, .T. ) ; +#351 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ; +#352 = EDGE_CURVE ( 'NONE', #287, #427, #615, .T. ) ; +#353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#354 = APPROVAL_DATE_TIME ( #45, #363 ) ; +#355 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#356 = ORIENTED_EDGE ( 'NONE', *, *, #282, .T. ) ; +#357 = ORIENTED_EDGE ( 'NONE', *, *, #43, .F. ) ; +#358 = AXIS2_PLACEMENT_3D ( 'NONE', #653, #319, #13 ) ; +#359 = LINE ( 'NONE', #166, #520 ) ; +#360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#361 = AXIS2_PLACEMENT_3D ( 'NONE', #561, #238, #620 ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#363 = APPROVAL ( #237, 'UNSPECIFIED' ) ; +#364 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#365 = ORIENTED_EDGE ( 'NONE', *, *, #256, .F. ) ; +#366 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ; +#367 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#369 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#370 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#371 = EDGE_CURVE ( 'NONE', #656, #569, #613, .T. ) ; +#372 = PERSON_AND_ORGANIZATION ( #580, #98 ) ; +#373 = PERSON_AND_ORGANIZATION ( #580, #98 ) ; +#374 = VECTOR ( 'NONE', #396, 1000.000000000000000 ) ; +#375 = FACE_OUTER_BOUND ( 'NONE', #322, .T. ) ; +#376 = EDGE_LOOP ( 'NONE', ( #350, #477, #607, #507 ) ) ; +#377 = CIRCLE ( 'NONE', #51, 5.000000000000000000 ) ; +#378 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#380 = FACE_OUTER_BOUND ( 'NONE', #470, .T. ) ; +#381 = ORIENTED_EDGE ( 'NONE', *, *, #677, .F. ) ; +#382 = ORIENTED_EDGE ( 'NONE', *, *, #479, .F. ) ; +#383 = EDGE_CURVE ( 'NONE', #603, #287, #611, .T. ) ; +#384 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#385 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#387 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#388 = VERTEX_POINT ( 'NONE', #327 ) ; +#389 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#390 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 5.000000000000000000 ) ) ; +#393 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#394 = AXIS2_PLACEMENT_3D ( 'NONE', #583, #618, #284 ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#396 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#397 = TOROIDAL_SURFACE ( 'NONE', #6, 3.750000000000000000, 1.250000000000000000 ) ; +#398 = FACE_OUTER_BOUND ( 'NONE', #102, .T. ) ; +#399 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#400 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ; +#401 = PLANE ( 'NONE', #593 ) ; +#402 = ADVANCED_FACE ( 'NONE', ( #592 ), #614, .T. ) ; +#403 = ADVANCED_FACE ( 'NONE', ( #553 ), #601, .F. ) ; +#404 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #562 ) ; +#405 = CIRCLE ( 'NONE', #85, 5.000000000000000000 ) ; +#406 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#407 = EDGE_CURVE ( 'NONE', #665, #148, #591, .T. ) ; +#408 = ORIENTED_EDGE ( 'NONE', *, *, #658, .F. ) ; +#409 = ADVANCED_FACE ( 'NONE', ( #552 ), #414, .T. ) ; +#410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#412 = ADVANCED_FACE ( 'NONE', ( #538 ), #577, .T. ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#414 = TOROIDAL_SURFACE ( 'NONE', #180, 3.750000000000000000, 1.250000000000000000 ) ; +#415 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, -3.750000000000000900 ) ) ; +#417 = ORIENTED_EDGE ( 'NONE', *, *, #63, .F. ) ; +#418 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#419 = ORIENTED_EDGE ( 'NONE', *, *, #335, .F. ) ; +#420 = ADVANCED_FACE ( 'NONE', ( #537 ), #585, .T. ) ; +#421 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#422 = EDGE_CURVE ( 'NONE', #440, #326, #518, .T. ) ; +#423 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #296 ) ) ; +#424 = ADVANCED_FACE ( 'NONE', ( #274 ), #509, .F. ) ; +#425 = TOROIDAL_SURFACE ( 'NONE', #522, 3.750000000000000900, 1.250000000000000000 ) ; +#426 = FACE_OUTER_BOUND ( 'NONE', #691, .T. ) ; +#427 = VERTEX_POINT ( 'NONE', #391 ) ; +#428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#429 = ORIENTED_EDGE ( 'NONE', *, *, #371, .F. ) ; +#430 = ADVANCED_FACE ( 'NONE', ( #508 ), #496, .F. ) ; +#431 = ADVANCED_FACE ( 'NONE', ( #30 ), #401, .F. ) ; +#432 = ADVANCED_FACE ( 'NONE', ( #149 ), #451, .T. ) ; +#433 = AXIS2_PLACEMENT_3D ( 'NONE', #506, #181, #446 ) ; +#434 = CIRCLE ( 'NONE', #435, 3.750000000000000000 ) ; +#435 = AXIS2_PLACEMENT_3D ( 'NONE', #387, #83, #255 ) ; +#436 = FACE_OUTER_BOUND ( 'NONE', #534, .T. ) ; +#437 = ORIENTED_EDGE ( 'NONE', *, *, #20, .T. ) ; +#438 = ADVANCED_FACE ( 'NONE', ( #480 ), #8, .T. ) ; +#439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#440 = VERTEX_POINT ( 'NONE', #670 ) ; +#441 = ADVANCED_FACE ( 'NONE', ( #426 ), #500, .F. ) ; +#442 = EDGE_CURVE ( 'NONE', #207, #326, #434, .T. ) ; +#443 = PLANE ( 'NONE', #316 ) ; +#444 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #161, #265 ) ; +#445 = ADVANCED_FACE ( 'NONE', ( #436 ), #576, .T. ) ; +#446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#447 = ADVANCED_FACE ( 'NONE', ( #398 ), #397, .F. ) ; +#448 = ADVANCED_FACE ( 'NONE', ( #375 ), #443, .T. ) ; +#449 = ORIENTED_EDGE ( 'NONE', *, *, #596, .F. ) ; +#450 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#451 = CYLINDRICAL_SURFACE ( 'NONE', #394, 5.000000000000000000 ) ; +#452 = ADVANCED_FACE ( 'NONE', ( #453 ), #324, .T. ) ; +#453 = FACE_OUTER_BOUND ( 'NONE', #19, .T. ) ; +#454 = ADVANCED_FACE ( 'NONE', ( #380 ), #425, .F. ) ; +#455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#456 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999300, 4.592425496802575000E-016, 3.750000000000000900 ) ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( -19.99999999999999600, 5.357829746269669600E-016, 3.750000000000000000 ) ) ; +#459 = ORIENTED_EDGE ( 'NONE', *, *, #20, .F. ) ; +#460 = EDGE_CURVE ( 'NONE', #566, #388, #328, .T. ) ; +#461 = ADVANCED_FACE ( 'NONE', ( #338 ), #308, .F. ) ; +#462 = ADVANCED_FACE ( 'NONE', ( #267 ), #307, .F. ) ; +#463 = ADVANCED_FACE ( 'NONE', ( #257 ), #234, .T. ) ; +#464 = PERSON_AND_ORGANIZATION ( #580, #98 ) ; +#465 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#467 = ORIENTED_EDGE ( 'NONE', *, *, #604, .T. ) ; +#468 = VERTEX_POINT ( 'NONE', #489 ) ; +#469 = ADVANCED_FACE ( 'NONE', ( #278 ), #202, .T. ) ; +#470 = EDGE_LOOP ( 'NONE', ( #334, #219, #169, #306 ) ) ; +#471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#472 = ADVANCED_FACE ( 'NONE', ( #251 ), #184, .T. ) ; +#473 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#474 = ADVANCED_FACE ( 'NONE', ( #268 ), #218, .T. ) ; +#475 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#476 = ADVANCED_FACE ( 'NONE', ( #133 ), #266, .T. ) ; +#477 = ORIENTED_EDGE ( 'NONE', *, *, #72, .T. ) ; +#478 = ORIENTED_EDGE ( 'NONE', *, *, #340, .F. ) ; +#479 = EDGE_CURVE ( 'NONE', #224, #440, #170, .T. ) ; +#480 = FACE_OUTER_BOUND ( 'NONE', #637, .T. ) ; +#481 = EDGE_LOOP ( 'NONE', ( #415, #467, #519, #408 ) ) ; +#482 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#483 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#484 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#485 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#487 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#488 = AXIS2_PLACEMENT_3D ( 'NONE', #517, #191, #570 ) ; +#489 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#490 = ORIENTED_EDGE ( 'NONE', *, *, #96, .T. ) ; +#491 = AXIS2_PLACEMENT_3D ( 'NONE', #513, #564, #240 ) ; +#492 = ORIENTED_EDGE ( 'NONE', *, *, #636, .F. ) ; +#493 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #16, #671, ( #444 ) ) ; +#494 = AXIS2_PLACEMENT_3D ( 'NONE', #303, #682, #450 ) ; +#495 = SHAPE_DEFINITION_REPRESENTATION ( #174, #179 ) ; +#496 = TOROIDAL_SURFACE ( 'NONE', #252, 3.750000000000000000, 1.250000000000000000 ) ; +#497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#498 = ORIENTED_EDGE ( 'NONE', *, *, #689, .T. ) ; +#499 = EDGE_CURVE ( 'NONE', #148, #117, #690, .T. ) ; +#500 = TOROIDAL_SURFACE ( 'NONE', #491, 3.750000000000000900, 1.250000000000000000 ) ; +#501 = AXIS2_PLACEMENT_3D ( 'NONE', #87, #465, #138 ) ; +#502 = ORIENTED_EDGE ( 'NONE', *, *, #43, .T. ) ; +#503 = ORIENTED_EDGE ( 'NONE', *, *, #273, .T. ) ; +#504 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#507 = ORIENTED_EDGE ( 'NONE', *, *, #273, .F. ) ; +#508 = FACE_OUTER_BOUND ( 'NONE', #211, .T. ) ; +#509 = TOROIDAL_SURFACE ( 'NONE', #70, 3.750000000000000900, 1.250000000000000000 ) ; +#510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#511 = EDGE_CURVE ( 'NONE', #586, #77, #405, .T. ) ; +#512 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#514 = DATE_TIME_ROLE ( 'classification_date' ) ; +#515 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147352700E-016, 1.000000000000000000 ) ) ; +#516 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 6.123233995736766300E-016, -5.000000000000000000 ) ) ; +#517 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 4.592425496802574000E-016, 3.750000000000000000 ) ) ; +#518 = CIRCLE ( 'NONE', #213, 1.250000000000000200 ) ; +#519 = ORIENTED_EDGE ( 'NONE', *, *, #109, .F. ) ; +#520 = VECTOR ( 'NONE', #158, 1000.000000000000000 ) ; +#521 = AXIS2_PLACEMENT_3D ( 'NONE', #370, #64, #428 ) ; +#522 = AXIS2_PLACEMENT_3D ( 'NONE', #74, #25, #510 ) ; +#523 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 5.357829746269669600E-016, 3.750000000000000000 ) ) ; +#524 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#525 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#526 = APPROVAL ( #188, 'UNSPECIFIED' ) ; +#527 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #373, #512, ( #296 ) ) ; +#528 = EDGE_LOOP ( 'NONE', ( #579, #417, #313, #175 ) ) ; +#529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#530 = ORIENTED_EDGE ( 'NONE', *, *, #442, .F. ) ; +#531 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#532 = EDGE_CURVE ( 'NONE', #566, #117, #142, .T. ) ; +#533 = APPROVAL_PERSON_ORGANIZATION ( #675, #363, #619 ) ; +#534 = EDGE_LOOP ( 'NONE', ( #301, #346, #503, #53 ) ) ; +#535 = CIRCLE ( 'NONE', #648, 3.750000000000000000 ) ; +#536 = AXIS2_PLACEMENT_3D ( 'NONE', #588, #543, #486 ) ; +#537 = FACE_OUTER_BOUND ( 'NONE', #134, .T. ) ; +#538 = FACE_OUTER_BOUND ( 'NONE', #481, .T. ) ; +#539 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#540 = CC_DESIGN_SECURITY_CLASSIFICATION ( #555, ( #161 ) ) ; +#541 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ; +#542 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#544 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#545 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#546 = EDGE_CURVE ( 'NONE', #427, #221, #123, .T. ) ; +#547 = ADVANCED_FACE ( 'NONE', ( #201 ), #114, .T. ) ; +#548 = VERTEX_POINT ( 'NONE', #168 ) ; +#549 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ; +#550 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #544, #220 ) ; +#551 = AXIS2_PLACEMENT_3D ( 'NONE', #597, #369, #62 ) ; +#552 = FACE_OUTER_BOUND ( 'NONE', #652, .T. ) ; +#553 = FACE_OUTER_BOUND ( 'NONE', #24, .T. ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( -23.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#555 = SECURITY_CLASSIFICATION ( '', '', #456 ) ; +#556 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ; +#557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#558 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#559 = AXIS2_PLACEMENT_3D ( 'NONE', #539, #214, #55 ) ; +#560 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #185 ) ; +#561 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#562 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#563 = CLOSED_SHELL ( 'NONE', ( #403, #438, #447, #420, #454, #412, #424, #409, #469, #463, #452, #432, #445, #472, #431, #448, #402, #441, #476, #461, #474, #430, #547, #462 ) ) ; +#564 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#565 = APPROVAL_ROLE ( '' ) ; +#566 = VERTEX_POINT ( 'NONE', #79 ) ; +#567 = EDGE_CURVE ( 'NONE', #665, #660, #106, .T. ) ; +#568 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#569 = VERTEX_POINT ( 'NONE', #27 ) ; +#570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.224646799147353500E-016, 1.000000000000000000 ) ) ; +#571 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 5.357829746269669600E-016, 3.750000000000000000 ) ) ; +#572 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #568, #243 ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#574 = CIRCLE ( 'NONE', #572, 1.250000000000000200 ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#576 = CYLINDRICAL_SURFACE ( 'NONE', #663, 5.000000000000000000 ) ; +#577 = TOROIDAL_SURFACE ( 'NONE', #280, 3.750000000000000000, 1.250000000000000000 ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 25.00000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#579 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ; +#580 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#581 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#582 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #271, #285, ( #444 ) ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#584 = EDGE_CURVE ( 'NONE', #603, #221, #99, .T. ) ; +#585 = TOROIDAL_SURFACE ( 'NONE', #143, 3.750000000000000000, 1.250000000000000000 ) ; +#586 = VERTEX_POINT ( 'NONE', #186 ) ; +#587 = ORIENTED_EDGE ( 'NONE', *, *, #616, .T. ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#589 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#590 = AXIS2_PLACEMENT_3D ( 'NONE', #457, #131, #515 ) ; +#591 = CIRCLE ( 'NONE', #488, 1.250000000000000200 ) ; +#592 = FACE_OUTER_BOUND ( 'NONE', #269, .T. ) ; +#593 = AXIS2_PLACEMENT_3D ( 'NONE', #145, #638, #305 ) ; +#594 = ORIENTED_EDGE ( 'NONE', *, *, #567, .T. ) ; +#595 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ; +#596 = EDGE_CURVE ( 'NONE', #259, #47, #105, .T. ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( 18.75000000000001100, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#598 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#599 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #483, #155 ) ; +#600 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ; +#601 = TOROIDAL_SURFACE ( 'NONE', #223, 3.750000000000000000, 1.250000000000000000 ) ; +#602 = CIRCLE ( 'NONE', #192, 1.250000000000000200 ) ; +#603 = VERTEX_POINT ( 'NONE', #458 ) ; +#604 = EDGE_CURVE ( 'NONE', #77, #207, #93, .T. ) ; +#605 = LOCAL_TIME ( 15, 9, 22.00000000000000000, #487 ) ; +#606 = AXIS2_PLACEMENT_3D ( 'NONE', #310, #2, #353 ) ; +#607 = ORIENTED_EDGE ( 'NONE', *, *, #546, .T. ) ; +#608 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ; +#609 = ORIENTED_EDGE ( 'NONE', *, *, #664, .T. ) ; +#610 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#611 = CIRCLE ( 'NONE', #521, 3.750000000000000000 ) ; +#612 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#613 = CIRCLE ( 'NONE', #292, 2.499999999999999600 ) ; +#614 = TOROIDAL_SURFACE ( 'NONE', #329, 3.750000000000000000, 1.250000000000000000 ) ; +#615 = CIRCLE ( 'NONE', #358, 1.250000000000000200 ) ; +#616 = EDGE_CURVE ( 'NONE', #259, #548, #76, .T. ) ; +#617 = CIRCLE ( 'NONE', #590, 1.250000000000000200 ) ; +#618 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#619 = APPROVAL_ROLE ( '' ) ; +#620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#622 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#623 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#625 = APPROVAL_PERSON_ORGANIZATION ( #330, #526, #565 ) ; +#626 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#627 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#628 = PERSON_AND_ORGANIZATION ( #580, #98 ) ; +#629 = ORIENTED_EDGE ( 'NONE', *, *, #642, .F. ) ; +#630 = AXIS2_PLACEMENT_3D ( 'NONE', #684, #624, #33 ) ; +#631 = ORIENTED_EDGE ( 'NONE', *, *, #511, .T. ) ; +#632 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#633 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#636 = EDGE_CURVE ( 'NONE', #586, #187, #73, .T. ) ; +#637 = EDGE_LOOP ( 'NONE', ( #449, #587, #357, #381 ) ) ; +#638 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#639 = CIRCLE ( 'NONE', #550, 5.000000000000000000 ) ; +#640 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ; +#641 = VECTOR ( 'NONE', #37, 1000.000000000000000 ) ; +#642 = EDGE_CURVE ( 'NONE', #569, #548, #61, .T. ) ; +#643 = CIRCLE ( 'NONE', #536, 1.250000000000000200 ) ; +#644 = CIRCLE ( 'NONE', #4, 5.000000000000000000 ) ; +#645 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#646 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ; +#647 = EDGE_LOOP ( 'NONE', ( #52, #608, #345, #210 ) ) ; +#648 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #150, #108 ) ; +#649 = CIRCLE ( 'NONE', #154, 2.500000000000000400 ) ; +#650 = CIRCLE ( 'NONE', #630, 1.250000000000000200 ) ; +#651 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#652 = EDGE_LOOP ( 'NONE', ( #119, #323, #1, #549 ) ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#654 = LINE ( 'NONE', #297, #641 ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#656 = VERTEX_POINT ( 'NONE', #680 ) ; +#657 = CARTESIAN_POINT ( 'NONE', ( -18.74999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#658 = EDGE_CURVE ( 'NONE', #586, #326, #107, .T. ) ; +#659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#660 = VERTEX_POINT ( 'NONE', #573 ) ; +#661 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ; +#662 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #22, #439 ) ; +#663 = AXIS2_PLACEMENT_3D ( 'NONE', #384, #673, #621 ) ; +#664 = EDGE_CURVE ( 'NONE', #388, #566, #38, .T. ) ; +#665 = VERTEX_POINT ( 'NONE', #571 ) ; +#666 = CIRCLE ( 'NONE', #681, 5.000000000000000000 ) ; +#667 = CARTESIAN_POINT ( 'NONE', ( -24.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#668 = ORIENTED_EDGE ( 'NONE', *, *, #658, .T. ) ; +#669 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#670 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999600, 0.0000000000000000000, -2.500000000000000400 ) ) ; +#671 = DATE_TIME_ROLE ( 'creation_date' ) ; +#672 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#673 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#674 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#675 = PERSON_AND_ORGANIZATION ( #580, #98 ) ; +#676 = VERTEX_POINT ( 'NONE', #141 ) ; +#677 = EDGE_CURVE ( 'NONE', #47, #468, #28, .T. ) ; +#678 = EDGE_LOOP ( 'NONE', ( #390, #60, #215, #365 ) ) ; +#679 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( 21.25000000000000400, 0.0000000000000000000, -2.499999999999999600 ) ) ; +#681 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #3, #270 ) ; +#682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#683 = MANIFOLD_SOLID_BREP ( 'Fillet1', #563 ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( 23.75000000000000700, 0.0000000000000000000, -3.750000000000000000 ) ) ; +#685 = CIRCLE ( 'NONE', #606, 2.499999999999999600 ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( -21.24999999999999300, 0.0000000000000000000, -3.750000000000000900 ) ) ; +#687 = ORIENTED_EDGE ( 'NONE', *, *, #689, .F. ) ; +#688 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #355, #156 ) ; +#689 = EDGE_CURVE ( 'NONE', #603, #224, #5, .T. ) ; +#690 = CIRCLE ( 'NONE', #159, 5.000000000000000000 ) ; +#691 = EDGE_LOOP ( 'NONE', ( #687, #333, #541, #382 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Short_Hammer_Slide_Pin.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Short_Hammer_Slide_Pin.step new file mode 100644 index 0000000..576f3b0 --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Short_Hammer_Slide_Pin.step @@ -0,0 +1,192 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Short_Hammer_Slide_Pin.STEP', + '2013-11-14T05:09:08', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2 = PERSON_AND_ORGANIZATION ( #102, #144 ) ; +#3 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4 = MECHANICAL_CONTEXT ( 'NONE', #167, 'mechanical' ) ; +#5 = SECURITY_CLASSIFICATION ( '', '', #11 ) ; +#6 = FACE_OUTER_BOUND ( 'NONE', #77, .T. ) ; +#7 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#8 = PERSON_AND_ORGANIZATION ( #102, #144 ) ; +#9 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #114, 'distance_accuracy_value', 'NONE'); +#10 = DATE_AND_TIME ( #47, #76 ) ; +#11 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#12 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#13 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#15 = DATE_AND_TIME ( #49, #157 ) ; +#16 = LINE ( 'NONE', #99, #174 ) ; +#17 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #8, #7, ( #41 ) ) ; +#18 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#19 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ; +#20 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #27, #95, ( #5 ) ) ; +#21 = DATE_TIME_ROLE ( 'classification_date' ) ; +#22 = VERTEX_POINT ( 'NONE', #113 ) ; +#23 = CC_DESIGN_APPROVAL ( #34, ( #41 ) ) ; +#24 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#25 = ORIENTED_EDGE ( 'NONE', *, *, #135, .F. ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27 = PERSON_AND_ORGANIZATION ( #102, #144 ) ; +#28 = ORIENTED_EDGE ( 'NONE', *, *, #145, .T. ) ; +#29 = DATE_AND_TIME ( #56, #169 ) ; +#30 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#31 = APPROVAL_PERSON_ORGANIZATION ( #83, #34, #85 ) ; +#32 = PERSON_AND_ORGANIZATION ( #102, #144 ) ; +#33 = FACE_OUTER_BOUND ( 'NONE', #171, .T. ) ; +#34 = APPROVAL ( #170, 'UNSPECIFIED' ) ; +#35 = APPROVAL_ROLE ( '' ) ; +#36 = CYLINDRICAL_SURFACE ( 'NONE', #87, 4.999999999999999100 ) ; +#37 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ; +#39 = PLANE ( 'NONE', #100 ) ; +#40 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#41 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #130, .NOT_KNOWN. ) ; +#42 = PERSON_AND_ORGANIZATION ( #102, #144 ) ; +#43 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #130 ) ) ; +#44 = CC_DESIGN_SECURITY_CLASSIFICATION ( #5, ( #41 ) ) ; +#45 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #118 ) ; +#46 = CC_DESIGN_APPROVAL ( #51, ( #5 ) ) ; +#47 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#48 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #82, #73, ( #60 ) ) ; +#49 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#50 = ORIENTED_EDGE ( 'NONE', *, *, #151, .T. ) ; +#51 = APPROVAL ( #110, 'UNSPECIFIED' ) ; +#52 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#53 = VECTOR ( 'NONE', #78, 1000.000000000000000 ) ; +#54 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #68, #21, ( #5 ) ) ; +#55 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #106, #146, ( #60 ) ) ; +#56 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#57 = APPROVAL_ROLE ( '' ) ; +#58 = CC_DESIGN_APPROVAL ( #59, ( #60 ) ) ; +#59 = APPROVAL ( #134, 'UNSPECIFIED' ) ; +#60 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #41, #80 ) ; +#61 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#62 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #142, #89, ( #130 ) ) ; +#63 = LINE ( 'NONE', #38, #53 ) ; +#64 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#66 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68 = DATE_AND_TIME ( #61, #173 ) ; +#69 = FACE_OUTER_BOUND ( 'NONE', #119, .T. ) ; +#70 = EDGE_LOOP ( 'NONE', ( #158, #25, #84, #121 ) ) ; +#71 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #32, #93, ( #41 ) ) ; +#72 = SHAPE_DEFINITION_REPRESENTATION ( #156, #172 ) ; +#73 = DATE_TIME_ROLE ( 'creation_date' ) ; +#74 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #163, #81 ) ; +#75 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #150 ) ; +#76 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #108 ) ; +#77 = EDGE_LOOP ( 'NONE', ( #160, #117 ) ) ; +#78 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80 = DESIGN_CONTEXT ( 'detailed design', #118, 'design' ) ; +#81 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#82 = DATE_AND_TIME ( #111, #149 ) ; +#83 = PERSON_AND_ORGANIZATION ( #102, #144 ) ; +#84 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ; +#85 = APPROVAL_ROLE ( '' ) ; +#86 = AXIS2_PLACEMENT_3D ( 'NONE', #26, #52, #24 ) ; +#87 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #1, #37 ) ; +#88 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ; +#89 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#90 = APPROVAL_PERSON_ORGANIZATION ( #42, #59, #57 ) ; +#91 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #9 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #114, #40, #129 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#92 = CIRCLE ( 'NONE', #116, 4.999999999999999100 ) ; +#93 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#94 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #3, #127 ) ; +#95 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#96 = CIRCLE ( 'NONE', #98, 4.999999999999999100 ) ; +#97 = ORIENTED_EDGE ( 'NONE', *, *, #151, .F. ) ; +#98 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #104, #30 ) ; +#99 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ; +#100 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #67, #101 ) ; +#101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#102 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#103 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.123233995736765300E-016, -4.999999999999999100 ) ) ; +#104 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#105 = VERTEX_POINT ( 'NONE', #88 ) ; +#106 = PERSON_AND_ORGANIZATION ( #102, #144 ) ; +#107 = CYLINDRICAL_SURFACE ( 'NONE', #86, 4.999999999999999100 ) ; +#108 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#109 = CIRCLE ( 'NONE', #122, 4.999999999999999100 ) ; +#110 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#111 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#112 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 4.999999999999999100 ) ) ; +#114 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#115 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ; +#116 = AXIS2_PLACEMENT_3D ( 'NONE', #64, #65, #66 ) ; +#117 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ; +#118 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#119 = EDGE_LOOP ( 'NONE', ( #19, #28, #50, #115 ) ) ; +#120 = APPROVAL_DATE_TIME ( #29, #34 ) ; +#121 = ORIENTED_EDGE ( 'NONE', *, *, #141, .T. ) ; +#122 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #125, #12 ) ; +#123 = AXIS2_PLACEMENT_3D ( 'NONE', #137, #175, #124 ) ; +#124 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#125 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#126 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#127 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#128 = CIRCLE ( 'NONE', #123, 4.999999999999999100 ) ; +#129 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#130 = PRODUCT ( 'Short_Hammer_Slide_Pin', 'Short_Hammer_Slide_Pin', '', ( #4 ) ) ; +#131 = EDGE_CURVE ( 'NONE', #147, #22, #63, .T. ) ; +#132 = APPROVAL_DATE_TIME ( #15, #51 ) ; +#133 = FACE_OUTER_BOUND ( 'NONE', #70, .T. ) ; +#134 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#135 = EDGE_CURVE ( 'NONE', #147, #105, #128, .T. ) ; +#136 = APPROVAL_DATE_TIME ( #10, #59 ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#140 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#141 = EDGE_CURVE ( 'NONE', #22, #165, #109, .T. ) ; +#142 = PERSON_AND_ORGANIZATION ( #102, #144 ) ; +#143 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #167 ) ; +#144 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#145 = EDGE_CURVE ( 'NONE', #105, #165, #16, .T. ) ; +#146 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#147 = VERTEX_POINT ( 'NONE', #13 ) ; +#148 = APPROVAL_PERSON_ORGANIZATION ( #2, #51, #35 ) ; +#149 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #140 ) ; +#150 = CLOSED_SHELL ( 'NONE', ( #154, #155, #153, #152 ) ) ; +#151 = EDGE_CURVE ( 'NONE', #165, #22, #92, .T. ) ; +#152 = ADVANCED_FACE ( 'NONE', ( #33 ), #39, .F. ) ; +#153 = ADVANCED_FACE ( 'NONE', ( #6 ), #162, .T. ) ; +#154 = ADVANCED_FACE ( 'NONE', ( #69 ), #36, .T. ) ; +#155 = ADVANCED_FACE ( 'NONE', ( #133 ), #107, .T. ) ; +#156 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #60 ) ; +#157 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #18 ) ; +#158 = ORIENTED_EDGE ( 'NONE', *, *, #145, .F. ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#160 = ORIENTED_EDGE ( 'NONE', *, *, #135, .T. ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( 30.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#162 = PLANE ( 'NONE', #94 ) ; +#163 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#164 = ORIENTED_EDGE ( 'NONE', *, *, #141, .F. ) ; +#165 = VERTEX_POINT ( 'NONE', #103 ) ; +#166 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#167 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#168 = EDGE_CURVE ( 'NONE', #105, #147, #96, .T. ) ; +#169 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #166 ) ; +#170 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#171 = EDGE_LOOP ( 'NONE', ( #164, #97 ) ) ; +#172 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Short_Hammer_Slide_Pin', ( #75, #74 ), #91 ) ; +#173 = LOCAL_TIME ( 15, 9, 8.000000000000000000, #126 ) ; +#174 = VECTOR ( 'NONE', #112, 1000.000000000000000 ) ; +#175 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger.step new file mode 100644 index 0000000..fde58d4 --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger.step @@ -0,0 +1,1819 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger.STEP', + '2013-11-14T05:08:54', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -5.650706642057635100, 12.49999999999999600 ) ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -27.50000000000000000, 4.999999999999999100 ) ) ; +#3 = EDGE_CURVE ( 'NONE', #1316, #552, #858, .T. ) ; +#4 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#5 = ORIENTED_EDGE ( 'NONE', *, *, #1646, .F. ) ; +#6 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#7 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 6.000000000000000000 ) ) ; +#8 = AXIS2_PLACEMENT_3D ( 'NONE', #1379, #738, #1108 ) ; +#9 = AXIS2_PLACEMENT_3D ( 'NONE', #623, #1519, #752 ) ; +#10 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#11 = ORIENTED_EDGE ( 'NONE', *, *, #728, .F. ) ; +#12 = PLANE ( 'NONE', #1115 ) ; +#13 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#14 = ADVANCED_FACE ( 'NONE', ( #854 ), #1265, .F. ) ; +#15 = EDGE_CURVE ( 'NONE', #1015, #1320, #849, .T. ) ; +#16 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -5.650706642057635100, 12.49999999999999600 ) ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999997000, -7.417960658116681000, 11.08331309741161300 ) ) ; +#18 = ORIENTED_EDGE ( 'NONE', *, *, #642, .F. ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 6.000000000000000000 ) ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.976654441113646900, 13.45516551394658200 ) ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.137585484784187500, 13.22667284709664100 ) ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -16.93233976002696700, 8.003279708770852700 ) ) ; +#23 = EDGE_CURVE ( 'NONE', #713, #1561, #859, .T. ) ; +#24 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.580573100414453900, 10.94139169650381000 ) ) ; +#25 = ADVANCED_FACE ( 'NONE', ( #852 ), #832, .T. ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 4.999999999999999100 ) ) ; +#27 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 12.07106781186551100, -33.75000000000000000 ) ) ; +#28 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.42257890503070800, 11.02367689119740700 ) ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 15.00000000000000200, -33.75000000000000000 ) ) ; +#31 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.97138778027139800, 8.272114272201745800 ) ) ; +#32 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -9.146021867520103000, 9.844898011812242400 ) ) ; +#33 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -11.91503992045365500, 8.751661752685025800 ) ) ; +#34 = EDGE_CURVE ( 'NONE', #1578, #1037, #838, .T. ) ; +#35 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -19.08855029898276400, 10.04984743555896600 ) ) ; +#36 = ADVANCED_FACE ( 'NONE', ( #848 ), #829, .T. ) ; +#37 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.98395292476766700, 10.00298150381354600 ) ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.848419889470654300, 13.69166122792734800 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -5.650706642057635100, 15.00000000000000000 ) ) ; +#40 = EDGE_CURVE ( 'NONE', #1215, #1099, #822, .T. ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -21.16249870373122700, 10.32940931604150900 ) ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 15.00000000000005000, -38.74999999999995000 ) ) ; +#43 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#44 = ADVANCED_FACE ( 'NONE', ( #833 ), #811, .T. ) ; +#45 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 15.00000000000000200, -38.75000000000000000 ) ) ; +#46 = AXIS2_PLACEMENT_3D ( 'NONE', #949, #162, #373 ) ; +#47 = APPROVAL_DATE_TIME ( #51, #578 ) ; +#48 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#49 = AXIS2_PLACEMENT_3D ( 'NONE', #1286, #1414, #1545 ) ; +#50 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.090249291540239100, 12.73833224558546600 ) ) ; +#51 = DATE_AND_TIME ( #55, #57 ) ; +#52 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 14.07460947032089700, -34.25000000000000000 ) ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 8.535533905932791000, -32.28553390593275900 ) ) ; +#54 = ORIENTED_EDGE ( 'NONE', *, *, #444, .T. ) ; +#55 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#56 = ORIENTED_EDGE ( 'NONE', *, *, #356, .F. ) ; +#57 = LOCAL_TIME ( 15, 8, 54.00000000000000000, #61 ) ; +#58 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1333, #1590, #653, #1548, #783, #17, #900, #134, #1035, #248, #1164, #380, #1298, #514, #1423, #661, #1554, #788, #22, #909, #137, #1042, #255, #1171, #383, #1305 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001273022029655098400, 0.001909533044482645800, 0.002546044059310193000, 0.005092088118620382400, 0.006365110148275475400, 0.007638132177930568500, 0.01018417623724075400, 0.01145719826689584600, 0.01273022029655093700, 0.01527626435586112300, 0.01782230841517130900, 0.02036835247448149500 ), + .UNSPECIFIED. ) ; +#59 = PLANE ( 'NONE', #1353 ) ; +#60 = VERTEX_POINT ( 'NONE', #419 ) ; +#61 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#62 = APPROVAL_PERSON_ORGANIZATION ( #68, #578, #882 ) ; +#63 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#64 = EDGE_CURVE ( 'NONE', #1037, #1399, #828, .T. ) ; +#65 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#66 = AXIS2_PLACEMENT_3D ( 'NONE', #714, #1611, #843 ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -27.50000000000000000, 4.999999999999999100 ) ) ; +#68 = PERSON_AND_ORGANIZATION ( #622, #131 ) ; +#69 = DATE_AND_TIME ( #71, #72 ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.01387818865997300, 11.20627521612005000 ) ) ; +#71 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#72 = LOCAL_TIME ( 15, 8, 54.00000000000000000, #75 ) ; +#73 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74 = EDGE_CURVE ( 'NONE', #198, #1188, #817, .T. ) ; +#75 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -17.80743157155046000, 8.542136437520694500 ) ) ; +#77 = PERSON_AND_ORGANIZATION ( #622, #131 ) ; +#78 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #407, #246, #1422 ), + ( #660, #1552, #787 ), + ( #21, #907, #136 ), + ( #1041, #254, #1169 ), + ( #382, #1303, #519 ), + ( #1427, #666, #1245 ), + ( #461, #1376, #604 ), + ( #1505, #735, #1632 ), + ( #863, #92, #989 ), + ( #202, #1121, #331 ), + ( #1249, #469, #1382 ), + ( #606, #1508, #743 ), + ( #1638, #1229, #445 ), + ( #1366, #586, #1490 ), + ( #722, #1619, #847 ), + ( #82, #978, #187 ), + ( #1104, #321, #1237 ), + ( #450, #1371, #594 ), + ( #1496, #727, #1626 ), + ( #855, #86, #984 ), + ( #195, #1110, #326 ), + ( #1243, #459, #1374 ), + ( #603, #1503, #733 ), + ( #1631, #861, #90 ), + ( #987, #201, #1118 ), + ( #329, #1248, #466 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.168404344971008900E-019, 0.001273022029655093000, 0.001909533044482639700, 0.002546044059310186400, 0.005092088118620372900, 0.006365110148275466800, 0.007638132177930559800, 0.01018417623724074600, 0.01145719826689584100, 0.01273022029655093400, 0.01527626435586112000, 0.01782230841517130600, 0.02036835247448149200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#79 = PERSON_AND_ORGANIZATION ( #622, #131 ) ; +#80 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#81 = AXIS2_PLACEMENT_3D ( 'NONE', #359, #1278, #493 ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -15.44527532636602600, 10.10274430809844900 ) ) ; +#83 = AXIS2_PLACEMENT_3D ( 'NONE', #110, #346, #1266 ) ; +#84 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.650706642057635100, 12.99999999999999800 ) ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -18.13438209179688300, 9.995355174306439500 ) ) ; +#87 = PERSON_AND_ORGANIZATION ( #622, #131 ) ; +#88 = APPROVAL_DATE_TIME ( #89, #365 ) ; +#89 = DATE_AND_TIME ( #91, #94 ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -23.20324252826955600, 8.770058589296631600 ) ) ; +#91 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#92 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -10.09962527910458800, 11.60806680927063700 ) ) ; +#93 = ADVANCED_FACE ( 'NONE', ( #812 ), #801, .T. ) ; +#94 = LOCAL_TIME ( 15, 8, 54.00000000000000000, #97 ) ; +#95 = EDGE_CURVE ( 'NONE', #1188, #1463, #800, .T. ) ; +#96 = VERTEX_POINT ( 'NONE', #1267 ) ; +#97 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#98 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#99 = EDGE_LOOP ( 'NONE', ( #1555, #1583, #1540, #1553 ) ) ; +#100 = APPROVAL_PERSON_ORGANIZATION ( #104, #365, #1272 ) ; +#101 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#103 = EDGE_CURVE ( 'NONE', #1597, #1117, #805, .T. ) ; +#104 = PERSON_AND_ORGANIZATION ( #622, #131 ) ; +#105 = DATE_AND_TIME ( #107, #108 ) ; +#106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#107 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#108 = LOCAL_TIME ( 15, 8, 54.00000000000000000, #109 ) ; +#109 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#111 = PERSON_AND_ORGANIZATION ( #622, #131 ) ; +#112 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#113 = APPROVAL_DATE_TIME ( #117, #1635 ) ; +#114 = EDGE_CURVE ( 'NONE', #1522, #1624, #798, .T. ) ; +#115 = AXIS2_PLACEMENT_3D ( 'NONE', #1352, #957, #569 ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 5.000000000000000000 ) ) ; +#117 = DATE_AND_TIME ( #119, #120 ) ; +#118 = EDGE_CURVE ( 'NONE', #637, #1264, #796, .T. ) ; +#119 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#120 = LOCAL_TIME ( 15, 8, 54.00000000000000000, #122 ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -11.94167538489759800, 10.82102907452442500 ) ) ; +#122 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 15.00000000000000000 ) ) ; +#124 = APPROVAL_PERSON_ORGANIZATION ( #126, #1635, #1010 ) ; +#125 = AXIS2_PLACEMENT_3D ( 'NONE', #547, #1065, #1456 ) ; +#126 = PERSON_AND_ORGANIZATION ( #622, #131 ) ; +#127 = ORIENTED_EDGE ( 'NONE', *, *, #257, .T. ) ; +#128 = PERSON_AND_ORGANIZATION ( #622, #131 ) ; +#129 = AXIS2_PLACEMENT_3D ( 'NONE', #1076, #1339, #482 ) ; +#130 = VERTEX_POINT ( 'NONE', #2 ) ; +#131 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 2.775557561562891000E-015, -1.000000000000000000 ) ) ; +#133 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #875, .NOT_KNOWN. ) ; +#134 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -8.412502427677699400, 10.27080130694119300 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( -9.162803004922325200E-014, -8.137585484809081400, 13.22667284711761900 ) ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.542980539081853000, 12.01244373497981700 ) ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -19.03814334693832000, 8.037252147783988200 ) ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 8.908980334482196300 ) ) ; +#139 = EDGE_CURVE ( 'NONE', #981, #739, #1207, .T. ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.876261603485538400, 12.46582718843260400 ) ) ; +#141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#142 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#143 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.51034736420840000, 8.874305261825163900 ) ) ; +#144 = EDGE_CURVE ( 'NONE', #1417, #969, #791, .T. ) ; +#145 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#146 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -14.30216336995585600, 10.24628493136413900 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -7.580573099881788400, 10.94139169563724700 ) ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -21.23008495547712500, 10.34404809676146700 ) ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -18.19783459398828600, 7.994890595535682800 ) ) ; +#150 = AXIS2_PLACEMENT_3D ( 'NONE', #986, #199, #1116 ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -23.20324252833485800, 8.770058588345316200 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 10.00000000000004800, -33.75000000000000000 ) ) ; +#153 = AXIS2_PLACEMENT_3D ( 'NONE', #656, #785, #1039 ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -22.63442504618632600, 10.68985947085248100 ) ) ; +#155 = SHAPE_DEFINITION_REPRESENTATION ( #220, #1004 ) ; +#156 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#158 = PLANE ( 'NONE', #183 ) ; +#159 = CIRCLE ( 'NONE', #1466, 0.5000000000000004400 ) ; +#160 = EDGE_LOOP ( 'NONE', ( #1031, #1032, #1034, #1036 ) ) ; +#161 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#162 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#163 = EDGE_CURVE ( 'NONE', #1117, #779, #236, .T. ) ; +#164 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -6.090249291540239100, 12.73833224558546600 ) ) ; +#167 = VECTOR ( 'NONE', #1613, 1000.000000000000000 ) ; +#168 = ADVANCED_FACE ( 'NONE', ( #771 ), #768, .T. ) ; +#169 = VECTOR ( 'NONE', #340, 1000.000000000000000 ) ; +#170 = EDGE_CURVE ( 'NONE', #552, #1113, #777, .T. ) ; +#171 = FACE_OUTER_BOUND ( 'NONE', #1257, .T. ) ; +#172 = LINE ( 'NONE', #1512, #167 ) ; +#173 = LINE ( 'NONE', #844, #189 ) ; +#174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#175 = CYLINDRICAL_SURFACE ( 'NONE', #1258, 2.499999999999999600 ) ; +#176 = FACE_OUTER_BOUND ( 'NONE', #976, .T. ) ; +#177 = AXIS2_PLACEMENT_3D ( 'NONE', #1157, #1539, #369 ) ; +#178 = ORIENTED_EDGE ( 'NONE', *, *, #1086, .T. ) ; +#179 = AXIS2_PLACEMENT_3D ( 'NONE', #301, #1214, #428 ) ; +#180 = PLANE ( 'NONE', #1226 ) ; +#181 = EDGE_CURVE ( 'NONE', #1417, #60, #774, .T. ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -9.988832072364648000, 9.744220378943776200 ) ) ; +#183 = AXIS2_PLACEMENT_3D ( 'NONE', #1073, #692, #1592 ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -25.50000000000000400, 8.908980334482196300 ) ) ; +#185 = CYLINDRICAL_SURFACE ( 'NONE', #1287, 2.500000000000000400 ) ; +#186 = FACE_OUTER_BOUND ( 'NONE', #930, .T. ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.23688826213049200, 8.113205315612550100 ) ) ; +#188 = FACE_OUTER_BOUND ( 'NONE', #1240, .T. ) ; +#189 = VECTOR ( 'NONE', #101, 1000.000000000000000 ) ; +#190 = VERTEX_POINT ( 'NONE', #332 ) ; +#191 = EDGE_CURVE ( 'NONE', #1593, #1100, #757, .T. ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -9.042347097591852300, 12.31988535381377200 ) ) ; +#193 = LINE ( 'NONE', #723, #209 ) ; +#194 = CIRCLE ( 'NONE', #1398, 2.500000000000000400 ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -18.89856631673351800, 10.03399183885383600 ) ) ; +#196 = EDGE_LOOP ( 'NONE', ( #938, #940, #952, #955, #960, #962, #968, #1393, #971, #973, #977 ) ) ; +#197 = FACE_OUTER_BOUND ( 'NONE', #1400, .T. ) ; +#198 = VERTEX_POINT ( 'NONE', #284 ) ; +#199 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#200 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #243, #647, #658 ), + ( #1549, #786, #20 ), + ( #905, #135, #1040 ), + ( #251, #1167, #381 ), + ( #1301, #517, #1426 ), + ( #665, #1559, #790 ), + ( #24, #912, #140 ), + ( #1044, #260, #1175 ), + ( #385, #1308, #527 ), + ( #1432, #669, #1565 ), + ( #799, #29, #919 ), + ( #143, #1543, #781 ), + ( #1312, #533, #1436 ), + ( #672, #1569, #802 ), + ( #31, #922, #146 ), + ( #1055, #266, #1184 ), + ( #400, #1317, #538 ), + ( #1445, #678, #1576 ), + ( #807, #37, #931 ), + ( #149, #1063, #274 ), + ( #1190, #406, #1324 ), + ( #543, #1450, #686 ), + ( #1581, #810, #41 ), + ( #939, #154, #1066 ), + ( #283, #1195, #410 ), + ( #1330, #550, #1458 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -2.168404344971008900E-019, 0.001273022029655093000, 0.001909533044482639700, 0.002546044059310186400, 0.005092088118620372900, 0.006365110148275466800, 0.007638132177930559800, 0.01018417623724074600, 0.01145719826689584100, 0.01273022029655093400, 0.01527626435586112000, 0.01782230841517130600, 0.02036835247448149200 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865476800, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#201 = CARTESIAN_POINT ( 'NONE', ( 9.898400000002221000, -23.34718519389340200, 10.92009493346553700 ) ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -11.08157245251726900, 11.15941459230614500 ) ) ; +#203 = AXIS2_PLACEMENT_3D ( 'NONE', #652, #241, #165 ) ; +#204 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.090249291540239100, 12.73833224558546600 ) ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 2.500000000000000000, 6.000000000000000000 ) ) ; +#206 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #105, #1140, ( #1627 ) ) ; +#207 = FACE_OUTER_BOUND ( 'NONE', #1170, .T. ) ; +#208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#209 = VECTOR ( 'NONE', #1621, 1000.000000000000000 ) ; +#210 = LINE ( 'NONE', #996, #169 ) ; +#211 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999997900, -22.64703816502843400, 10.69497141693869200 ) ) ; +#212 = FACE_OUTER_BOUND ( 'NONE', #1351, .T. ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#214 = VECTOR ( 'NONE', #834, 1000.000000000000000 ) ; +#215 = EDGE_CURVE ( 'NONE', #1178, #1597, #776, .T. ) ; +#216 = VECTOR ( 'NONE', #442, 1000.000000000000000 ) ; +#217 = AXIS2_PLACEMENT_3D ( 'NONE', #631, #1528, #763 ) ; +#218 = LINE ( 'NONE', #1363, #216 ) ; +#219 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#220 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #1627 ) ; +#221 = EDGE_CURVE ( 'NONE', #1480, #959, #753, .T. ) ; +#222 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#223 = VECTOR ( 'NONE', #705, 1000.000000000000000 ) ; +#224 = CIRCLE ( 'NONE', #990, 2.500000000000000400 ) ; +#225 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#226 = LINE ( 'NONE', #710, #214 ) ; +#227 = VECTOR ( 'NONE', #1354, 1000.000000000000000 ) ; +#228 = LINE ( 'NONE', #67, #223 ) ; +#229 = AXIS2_PLACEMENT_3D ( 'NONE', #1392, #624, #1521 ) ; +#230 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 5.000000000000000000 ) ) ; +#231 = LINE ( 'NONE', #304, #247 ) ; +#232 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#233 = LINE ( 'NONE', #827, #227 ) ; +#234 = ADVANCED_FACE ( 'NONE', ( #746 ), #554, .F. ) ; +#235 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#236 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1327, #277, #151, #546, #1454, #1179, #394, #1313, #534, #1438, #673, #1571, #804, #33, #924, #1570, #803, #32, #923, #147, #1057, #267, #1185, #401, #1318, #204 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002557559828101135500, 0.005115119656202270900, 0.007672679484303407200, 0.008951459398353975000, 0.01023023931240454200, 0.01278779914050567900, 0.01406657905455624600, 0.01534535896860681400, 0.01790291879670795000, 0.01854230875373323600, 0.01918169871075851900, 0.02046047862480909400 ), + .UNSPECIFIED. ) ; +#237 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999997900, -10.59151080115789200, 11.37749874967578600 ) ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 13.88695699409810700, -34.64043440472151800 ) ) ; +#239 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#240 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#241 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#242 = EDGE_CURVE ( 'NONE', #941, #1320, #742, .T. ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.090249291540238200, 12.73833224558546800 ) ) ; +#244 = FACE_OUTER_BOUND ( 'NONE', #1078, .T. ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 12.07106781186551100, -28.75000000000000000 ) ) ; +#246 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.848419889470653400, 13.69166122792734800 ) ) ; +#247 = VECTOR ( 'NONE', #1218, 1000.000000000000000 ) ; +#248 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -10.31164176175997600, 9.312325625971691800 ) ) ; +#249 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ; +#250 = CYLINDRICAL_SURFACE ( 'NONE', #860, 10.00000000000000000 ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.961041562251690400, 11.53203807000712700 ) ) ; +#252 = VERTEX_POINT ( 'NONE', #720 ) ; +#253 = CIRCLE ( 'NONE', #553, 2.000000000000000000 ) ; +#254 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -8.426816143425956100, 12.89430977556574500 ) ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000004100, -21.54510234311413400, 8.364007777193785700 ) ) ; +#256 = FACE_OUTER_BOUND ( 'NONE', #1027, .T. ) ; +#257 = EDGE_CURVE ( 'NONE', #1178, #1342, #758, .T. ) ; +#258 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#259 = CYLINDRICAL_SURFACE ( 'NONE', #115, 0.5000000000000004400 ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.505456136875942300, 11.95865453061662700 ) ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, 4.999999999999999100 ) ) ; +#262 = ADVANCED_FACE ( 'NONE', ( #740 ), #731, .F. ) ; +#263 = AXIS2_PLACEMENT_3D ( 'NONE', #824, #953, #164 ) ; +#264 = CIRCLE ( 'NONE', #1525, 2.000000000000000000 ) ; +#265 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.44527532635813200, 10.10274430803851900 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -7.108454269819223000, 11.37847331706463000 ) ) ; +#268 = EDGE_CURVE ( 'NONE', #1518, #1304, #734, .T. ) ; +#269 = TOROIDAL_SURFACE ( 'NONE', #263, 0.5000000000000000000, 2.000000000000000000 ) ; +#270 = FACE_OUTER_BOUND ( 'NONE', #1154, .T. ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -23.34199067556340200, 10.91786516622729600 ) ) ; +#272 = CYLINDRICAL_SURFACE ( 'NONE', #1630, 2.499999999999999600 ) ; +#273 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#274 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -18.13438209179736300, 9.995355174378627100 ) ) ; +#275 = CIRCLE ( 'NONE', #179, 2.000000000000000000 ) ; +#276 = FACE_OUTER_BOUND ( 'NONE', #1530, .T. ) ; +#277 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -24.01674353581402200, 9.031032299498218000 ) ) ; +#278 = FACE_OUTER_BOUND ( 'NONE', #160, .T. ) ; +#279 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#280 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 12.07106781186551100, -28.75000000000000000 ) ) ; +#281 = ORIENTED_EDGE ( 'NONE', *, *, #1269, .T. ) ; +#282 = EDGE_CURVE ( 'NONE', #1518, #903, #759, .T. ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.01793225539143600, 9.031542565270353200 ) ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 5.000000000000000000 ) ) ; +#285 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000000, 15.00000000000000000 ) ) ; +#287 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#288 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#289 = CIRCLE ( 'NONE', #1378, 2.000000000000000000 ) ; +#290 = AXIS2_PLACEMENT_3D ( 'NONE', #184, #1102, #319 ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 2.500000000000000400, -24.17893218813454200 ) ) ; +#292 = FACE_OUTER_BOUND ( 'NONE', #741, .T. ) ; +#293 = PLANE ( 'NONE', #439 ) ; +#294 = CC_DESIGN_APPROVAL ( #365, ( #133 ) ) ; +#295 = FACE_OUTER_BOUND ( 'NONE', #1612, .T. ) ; +#296 = VECTOR ( 'NONE', #823, 1000.000000000000000 ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 15.00000000000000200, -38.75000000000000000 ) ) ; +#298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8790852989652076000, 0.4766644911709406200 ) ) ; +#299 = EDGE_LOOP ( 'NONE', ( #1550, #1614, #1517, #1617 ) ) ; +#300 = LINE ( 'NONE', #53, #296 ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#302 = CIRCLE ( 'NONE', #446, 0.5000000000000004400 ) ; +#303 = FACE_OUTER_BOUND ( 'NONE', #1081, .T. ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 2.500000000000000000, 6.000000000000000000 ) ) ; +#305 = EDGE_CURVE ( 'NONE', #1013, #1178, #736, .T. ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 7.500000000000000000, -24.17893218813454200 ) ) ; +#307 = AXIS2_PLACEMENT_3D ( 'NONE', #1024, #770, #1153 ) ; +#308 = CYLINDRICAL_SURFACE ( 'NONE', #177, 2.000000000000000000 ) ; +#309 = CIRCLE ( 'NONE', #1270, 2.500000000000000400 ) ; +#310 = DIRECTION ( 'NONE', ( 1.354591455398884800E-016, -0.6246950475544240700, 0.7808688094430305000 ) ) ; +#311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#312 = EDGE_CURVE ( 'NONE', #252, #1326, #719, .T. ) ; +#313 = CIRCLE ( 'NONE', #1128, 0.5000000000000004400 ) ; +#314 = FACE_OUTER_BOUND ( 'NONE', #1497, .T. ) ; +#315 = EDGE_LOOP ( 'NONE', ( #1520, #1514, #1595, #5 ) ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.848419889470654300, 13.69166122792734800 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#318 = FACE_OUTER_BOUND ( 'NONE', #1643, .T. ) ; +#319 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#320 = LINE ( 'NONE', #895, #339 ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.83098092370215500, 10.06632461879768000 ) ) ; +#322 = EDGE_LOOP ( 'NONE', ( #1294, #1297, #1315, #1319 ) ) ; +#323 = AXIS2_PLACEMENT_3D ( 'NONE', #306, #1220, #434 ) ; +#324 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -9.947498666469583000, 11.71453930734435800 ) ) ; +#326 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -19.03814334696033200, 8.037252147473093800 ) ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -27.50000000000000000, 4.999999999999999100 ) ) ; +#328 = FACE_OUTER_BOUND ( 'NONE', #681, .T. ) ; +#329 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.01387818865996600, 11.20627521612004800 ) ) ; +#330 = CYLINDRICAL_SURFACE ( 'NONE', #1026, 2.000000000000000000 ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -10.31164176140583400, 9.312325625395788000 ) ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 5.242189406417883100, -38.75000000000000000 ) ) ; +#333 = CIRCLE ( 'NONE', #1216, 0.5000000000000004400 ) ; +#334 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#335 = EDGE_CURVE ( 'NONE', #1326, #60, #737, .T. ) ; +#336 = FACE_OUTER_BOUND ( 'NONE', #1283, .T. ) ; +#337 = VERTEX_POINT ( 'NONE', #1126 ) ; +#338 = FACE_BOUND ( 'NONE', #1622, .T. ) ; +#339 = VECTOR ( 'NONE', #1020, 1000.000000000000000 ) ; +#340 = DIRECTION ( 'NONE', ( -1.734723475976808100E-016, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#341 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#342 = FACE_OUTER_BOUND ( 'NONE', #1083, .T. ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -20.51810920348293300, 10.21903381801286800 ) ) ; +#344 = EDGE_CURVE ( 'NONE', #910, #951, #712, .T. ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 8.908980334482196300 ) ) ; +#346 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.068481283613056700E-018, 1.000000000000000000 ) ) ; +#348 = TOROIDAL_SURFACE ( 'NONE', #217, 0.5000000000000000000, 2.000000000000000000 ) ; +#349 = VECTOR ( 'NONE', #646, 1000.000000000000000 ) ; +#350 = LINE ( 'NONE', #1412, #349 ) ; +#351 = TOROIDAL_SURFACE ( 'NONE', #307, 0.5000000000000000000, 2.000000000000000000 ) ; +#352 = VERTEX_POINT ( 'NONE', #745 ) ; +#353 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#354 = VECTOR ( 'NONE', #892, 1000.000000000000000 ) ; +#355 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ; +#356 = EDGE_CURVE ( 'NONE', #1124, #981, #711, .T. ) ; +#357 = LINE ( 'NONE', #1282, #354 ) ; +#358 = FACE_OUTER_BOUND ( 'NONE', #1419, .T. ) ; +#359 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 5.242189406417883100, -28.74999999999999600 ) ) ; +#360 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#362 = EDGE_CURVE ( 'NONE', #1161, #1277, #701, .T. ) ; +#363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#364 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -27.50000000000000000, 8.908980334482196300 ) ) ; +#365 = APPROVAL ( #353, 'UNSPECIFIED' ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -9.636203360795383000, 11.90061888832404000 ) ) ; +#367 = FACE_OUTER_BOUND ( 'NONE', #963, .T. ) ; +#368 = CIRCLE ( 'NONE', #577, 2.499999999999999600 ) ; +#369 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#370 = CIRCLE ( 'NONE', #81, 10.00000000000000200 ) ; +#371 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 2.500000000000000400, 5.000000000000000000 ) ) ; +#372 = VECTOR ( 'NONE', #760, 1000.000000000000000 ) ; +#373 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#374 = AXIS2_PLACEMENT_3D ( 'NONE', #1492, #663, #1556 ) ; +#375 = CIRCLE ( 'NONE', #670, 2.000000000000000000 ) ; +#376 = CIRCLE ( 'NONE', #486, 2.499999999999999600 ) ; +#377 = DIRECTION ( 'NONE', ( -8.673617379884034200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#378 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.80277563773198700, 9.368439310809765900 ) ) ; +#379 = VECTOR ( 'NONE', #1033, 1000.000000000000000 ) ; +#380 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.51034736436577100, 8.874305262466938500 ) ) ; +#381 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.426816143438403000, 12.89430977557623100 ) ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.531220038068916300, 12.78530860090714700 ) ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.01674353581403000, 9.031032299498216200 ) ) ; +#384 = EDGE_CURVE ( 'NONE', #337, #1099, #708, .T. ) ; +#385 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.146021868228379100, 9.844898012964055300 ) ) ; +#386 = CIRCLE ( 'NONE', #388, 2.000000000000000000 ) ; +#387 = ADVANCED_FACE ( 'NONE', ( #700 ), #688, .T. ) ; +#388 = AXIS2_PLACEMENT_3D ( 'NONE', #1406, #641, #1537 ) ; +#389 = VECTOR ( 'NONE', #1547, 1000.000000000000000 ) ; +#390 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 6.000000000000000000 ) ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -5.650706642057635100, 15.00000000000000000 ) ) ; +#392 = AXIS2_PLACEMENT_3D ( 'NONE', #1143, #360, #1279 ) ; +#393 = CIRCLE ( 'NONE', #754, 5.000000000000000900 ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -18.19783459398329500, 7.994890595618256800 ) ) ; +#395 = VECTOR ( 'NONE', #1288, 1000.000000000000000 ) ; +#396 = LINE ( 'NONE', #896, #395 ) ; +#397 = LINE ( 'NONE', #1526, #372 ) ; +#398 = AXIS2_PLACEMENT_3D ( 'NONE', #942, #156, #1067 ) ; +#399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.66255172104391800, 8.073042939626121800 ) ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -6.542980537723937400, 12.01244373387206300 ) ) ; +#402 = CIRCLE ( 'NONE', #839, 0.5000000000000004400 ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 15.00000000000000200, -33.75000000000000000 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -25.50000000000000400, 0.0000000000000000000 ) ) ; +#405 = ADVANCED_FACE ( 'NONE', ( #697 ), #693, .T. ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -18.89856631675872100, 10.03399183862550400 ) ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.848419889470654300, 13.69166122792734800 ) ) ; +#408 = AXIS2_PLACEMENT_3D ( 'NONE', #414, #1332, #555 ) ; +#409 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -23.34718519476548700, 10.92009493164642100 ) ) ; +#411 = CIRCLE ( 'NONE', #920, 2.000000000000000000 ) ; +#412 = VECTOR ( 'NONE', #1642, 1000.000000000000000 ) ; +#413 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#414 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000000, 15.00000000000000000 ) ) ; +#415 = LINE ( 'NONE', #1507, #412 ) ; +#416 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.99999999999999300, 8.908980334482196300 ) ) ; +#417 = LINE ( 'NONE', #1150, #389 ) ; +#418 = LINE ( 'NONE', #888, #436 ) ; +#419 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.0000000000000000000, 15.00000000000000000 ) ) ; +#420 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#421 = EDGE_LOOP ( 'NONE', ( #1050, #1235, #1280, #1359 ) ) ; +#422 = LINE ( 'NONE', #899, #379 ) ; +#423 = CIRCLE ( 'NONE', #579, 5.000000000000000900 ) ; +#424 = EDGE_CURVE ( 'NONE', #1277, #979, #1544, .T. ) ; +#425 = DIRECTION ( 'NONE', ( -8.673617379884041600E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#426 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.5000000000000000000, 15.00000000000000000 ) ) ; +#427 = AXIS2_PLACEMENT_3D ( 'NONE', #830, #1361, #581 ) ; +#428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#430 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 13.57460947032089600, -33.75000000000000000 ) ) ; +#431 = CYLINDRICAL_SURFACE ( 'NONE', #8, 2.500000000000000400 ) ; +#432 = EDGE_CURVE ( 'NONE', #910, #1304, #694, .T. ) ; +#433 = CIRCLE ( 'NONE', #392, 0.5000000000000004400 ) ; +#434 = DIRECTION ( 'NONE', ( -8.673617379884034200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#435 = LINE ( 'NONE', #992, #438 ) ; +#436 = VECTOR ( 'NONE', #235, 1000.000000000000000 ) ; +#437 = PLANE ( 'NONE', #1105 ) ; +#438 = VECTOR ( 'NONE', #98, 1000.000000000000000 ) ; +#439 = AXIS2_PLACEMENT_3D ( 'NONE', #45, #1208, #425 ) ; +#440 = VECTOR ( 'NONE', #1247, 1000.000000000000000 ) ; +#441 = LINE ( 'NONE', #1373, #440 ) ; +#442 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.168404344971010100E-016, -1.173774534824853400E-032 ) ) ; +#443 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#444 = EDGE_CURVE ( 'NONE', #252, #1381, #680, .T. ) ; +#445 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.91503992054957600, 8.751661753071312300 ) ) ; +#446 = AXIS2_PLACEMENT_3D ( 'NONE', #416, #1335, #557 ) ; +#447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#448 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -8.024940778207529500, 13.36611375979590700 ) ) ; +#450 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -16.59976296163652900, 10.01653210543602200 ) ) ; +#451 = LINE ( 'NONE', #327, #460 ) ; +#452 = FACE_OUTER_BOUND ( 'NONE', #1134, .T. ) ; +#453 = ADVANCED_FACE ( 'NONE', ( #671 ), #936, .T. ) ; +#454 = EDGE_CURVE ( 'NONE', #1117, #979, #682, .T. ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -10.92599198487987300, 11.22607764571063500 ) ) ; +#456 = VECTOR ( 'NONE', #983, 1000.000000000000000 ) ; +#457 = ADVANCED_FACE ( 'NONE', ( #679 ), #78, .T. ) ; +#458 = LINE ( 'NONE', #261, #456 ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -20.41252044604024700, 10.20108969111040100 ) ) ; +#460 = VECTOR ( 'NONE', #465, 1000.000000000000000 ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.876261603485538400, 12.46582718843260400 ) ) ; +#462 = CIRCLE ( 'NONE', #1097, 2.500000000000000400 ) ; +#463 = EDGE_LOOP ( 'NONE', ( #1176, #1180, #1192, #1196 ) ) ; +#464 = CIRCLE ( 'NONE', #1008, 0.5000000000000004400 ) ; +#465 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#466 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.80277563773198300, 9.368439310809765900 ) ) ; +#467 = ORIENTED_EDGE ( 'NONE', *, *, #642, .T. ) ; +#468 = CIRCLE ( 'NONE', #1441, 2.000000000000000000 ) ; +#469 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.42257890503070800, 11.02367689119740700 ) ) ; +#470 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #1043, #258 ) ; +#471 = ADVANCED_FACE ( 'NONE', ( #664 ), #651, .T. ) ; +#472 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#473 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.50000000000000400, 8.908980334482196300 ) ) ; +#474 = PLANE ( 'NONE', #1451 ) ; +#475 = VECTOR ( 'NONE', #1586, 1000.000000000000000 ) ; +#476 = ADVANCED_FACE ( 'NONE', ( #659 ), #638, .T. ) ; +#477 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -18.37094500583004100, 10.00599453467091800 ) ) ; +#478 = CYLINDRICAL_SURFACE ( 'NONE', #125, 0.5000000000000004400 ) ; +#479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#480 = CIRCLE ( 'NONE', #536, 2.000000000000000000 ) ; +#481 = EDGE_CURVE ( 'NONE', #1161, #869, #662, .T. ) ; +#482 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#483 = FACE_OUTER_BOUND ( 'NONE', #1199, .T. ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000000, 12.49999999999999800 ) ) ; +#485 = CIRCLE ( 'NONE', #150, 2.500000000000000400 ) ; +#486 = AXIS2_PLACEMENT_3D ( 'NONE', #116, #1014, #225 ) ; +#487 = VECTOR ( 'NONE', #937, 1000.000000000000000 ) ; +#488 = ADVANCED_FACE ( 'NONE', ( #633 ), #648, .T. ) ; +#489 = CIRCLE ( 'NONE', #46, 2.000000000000000000 ) ; +#490 = AXIS2_PLACEMENT_3D ( 'NONE', #1589, #820, #48 ) ; +#491 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#492 = LINE ( 'NONE', #1187, #487 ) ; +#493 = DIRECTION ( 'NONE', ( -8.673617379884034200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#494 = VECTOR ( 'NONE', #1487, 1000.000000000000000 ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 11.40898033448219600 ) ) ; +#496 = LINE ( 'NONE', #157, #475 ) ; +#497 = AXIS2_PLACEMENT_3D ( 'NONE', #1469, #696, #1594 ) ; +#498 = CIRCLE ( 'NONE', #842, 5.000000000000000900 ) ; +#499 = LINE ( 'NONE', #1062, #503 ) ; +#500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.068481283613056700E-018, -1.000000000000000000 ) ) ; +#501 = CIRCLE ( 'NONE', #600, 2.000000000000000000 ) ; +#502 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.756650239989202300, 12.55600763148912000 ) ) ; +#503 = VECTOR ( 'NONE', #273, 1000.000000000000000 ) ; +#504 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, -38.75000000000000000 ) ) ; +#505 = VERTEX_POINT ( 'NONE', #27 ) ; +#506 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -5.650706642057635100, 12.99999999999999800 ) ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.49999999999999600, 8.908980334482196300 ) ) ; +#509 = ADVANCED_FACE ( 'NONE', ( #627 ), #1568, .F. ) ; +#510 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 2.500000000000000000, 12.49999999999999800 ) ) ; +#511 = EDGE_CURVE ( 'NONE', #1119, #1493, #630, .T. ) ; +#512 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 8.673617379884041600E-017 ) ) ; +#513 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.3944487245360096500, 0.9189179526551405400 ) ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999997000, -13.14012574021799100, 8.428476755116751200 ) ) ; +#515 = ADVANCED_FACE ( 'NONE', ( #657 ), #635, .T. ) ; +#516 = LINE ( 'NONE', #576, #494 ) ; +#517 = CARTESIAN_POINT ( 'NONE', ( -1.854784477705111100E-013, -8.531220038051722900, 12.78530860088911900 ) ) ; +#518 = VECTOR ( 'NONE', #1225, 1000.000000000000000 ) ; +#519 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.108454270325838200, 11.37847331747763100 ) ) ; +#520 = CIRCLE ( 'NONE', #66, 2.000000000000000000 ) ; +#521 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 12.07106781186551100, -33.75000000000000000 ) ) ; +#522 = ADVANCED_FACE ( 'NONE', ( #617 ), #612, .F. ) ; +#523 = EDGE_CURVE ( 'NONE', #1383, #1522, #632, .T. ) ; +#524 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#525 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#526 = VECTOR ( 'NONE', #837, 1000.000000000000000 ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -10.09962527885331300, 11.60806680872068100 ) ) ; +#528 = LINE ( 'NONE', #1095, #518 ) ; +#529 = CC_DESIGN_APPROVAL ( #1635, ( #1627 ) ) ; +#530 = VECTOR ( 'NONE', #1482, 1000.000000000000000 ) ; +#531 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 14.07460947032089600, -34.25000000000000000 ) ) ; +#532 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#533 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.47239079983300100, 10.67305241955643600 ) ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.50966165280716800, 8.018177281315875100 ) ) ; +#535 = AXIS2_PLACEMENT_3D ( 'NONE', #948, #161, #1079 ) ; +#536 = AXIS2_PLACEMENT_3D ( 'NONE', #1070, #285, #1203 ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -15.83098092369486100, 10.06632461868510500 ) ) ; +#539 = EDGE_CURVE ( 'NONE', #1493, #1417, #615, .T. ) ; +#540 = FACE_OUTER_BOUND ( 'NONE', #322, .T. ) ; +#541 = VECTOR ( 'NONE', #65, 1000.000000000000000 ) ; +#542 = CIRCLE ( 'NONE', #323, 5.000000000000000900 ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.71176587877599200, 8.221972890131636900 ) ) ; +#544 = LINE ( 'NONE', #964, #530 ) ; +#545 = VECTOR ( 'NONE', #1476, 1000.000000000000000 ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -21.54510234311411700, 8.364007777193778600 ) ) ; +#547 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008200200, 13.57460947032089400, -34.25000000000000000 ) ) ; +#548 = LINE ( 'NONE', #1355, #526 ) ; +#549 = EDGE_CURVE ( 'NONE', #997, #1119, #618, .T. ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( 1.301042606982605300E-015, -24.01387818865996600, 11.20627521612004400 ) ) ; +#551 = VECTOR ( 'NONE', #429, 1000.000000000000000 ) ; +#552 = VERTEX_POINT ( 'NONE', #687 ) ; +#553 = AXIS2_PLACEMENT_3D ( 'NONE', #965, #174, #1091 ) ; +#554 = PLANE ( 'NONE', #1061 ) ; +#555 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000005000, 2.500000000000000000, -24.17893218813454200 ) ) ; +#557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#558 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#559 = AXIS2_PLACEMENT_3D ( 'NONE', #1307, #525, #1430 ) ; +#560 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 2.500000000000000000, -38.75000000000000000 ) ) ; +#561 = ADVANCED_FACE ( 'NONE', ( #611 ), #1202, .F. ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 5.000000000000000000 ) ) ; +#563 = LINE ( 'NONE', #1088, #541 ) ; +#564 = VECTOR ( 'NONE', #1601, 1000.000000000000000 ) ; +#565 = DIRECTION ( 'NONE', ( 1.734723475976808300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#566 = DIRECTION ( 'NONE', ( 1.226634733346693900E-016, -0.7071067811865511300, 0.7071067811865440200 ) ) ; +#567 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000000, 15.00000000000000000 ) ) ; +#568 = LINE ( 'NONE', #1211, #551 ) ; +#569 = DIRECTION ( 'NONE', ( -2.168404344971006900E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#570 = VECTOR ( 'NONE', #954, 1000.000000000000000 ) ; +#571 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 8.535533905932791000, -32.28553390593275900 ) ) ; +#572 = LINE ( 'NONE', #291, #570 ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#574 = LINE ( 'NONE', #1349, #609 ) ; +#575 = EDGE_CURVE ( 'NONE', #1326, #969, #593, .T. ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.848419889470654300, 13.69166122792734800 ) ) ; +#577 = AXIS2_PLACEMENT_3D ( 'NONE', #230, #1146, #361 ) ; +#578 = APPROVAL ( #6, 'UNSPECIFIED' ) ; +#579 = AXIS2_PLACEMENT_3D ( 'NONE', #610, #1509, #747 ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.01387818865997300, 11.20627521612005000 ) ) ; +#581 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#582 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 15.00000000000000200, -33.75000000000000000 ) ) ; +#583 = LINE ( 'NONE', #567, #564 ) ; +#584 = EDGE_CURVE ( 'NONE', #994, #337, #592, .T. ) ; +#585 = LINE ( 'NONE', #1473, #545 ) ; +#586 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -13.55590000434091600, 10.38721618263855700 ) ) ; +#587 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #875 ) ) ; +#588 = CIRCLE ( 'NONE', #1542, 2.000000000000000000 ) ; +#589 = VECTOR ( 'NONE', #1462, 1000.000000000000000 ) ; +#590 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#591 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#592 = LINE ( 'NONE', #689, #589 ) ; +#593 = CIRCLE ( 'NONE', #535, 2.500000000000000400 ) ; +#594 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.50966165281864300, 8.018177281174633500 ) ) ; +#595 = ORIENTED_EDGE ( 'NONE', *, *, #1006, .T. ) ; +#596 = CIRCLE ( 'NONE', #497, 2.499999999999999600 ) ; +#597 = AXIS2_PLACEMENT_3D ( 'NONE', #1183, #1054, #1575 ) ; +#598 = ORIENTED_EDGE ( 'NONE', *, *, #1047, .F. ) ; +#599 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -12.63435292114868400, 10.61466953246391000 ) ) ; +#600 = AXIS2_PLACEMENT_3D ( 'NONE', #1447, #684, #1579 ) ; +#601 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 13.57460947032089600, -34.25000000000000000 ) ) ; +#602 = CC_DESIGN_SECURITY_CLASSIFICATION ( #1001, ( #133 ) ) ; +#603 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -21.16249870373122700, 10.32940931604150900 ) ) ; +#604 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.580573100414453900, 10.94139169650381000 ) ) ; +#605 = VECTOR ( 'NONE', #1069, 1000.000000000000000 ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -12.11727336397996000, 10.78082108094077200 ) ) ; +#607 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#608 = EDGE_CURVE ( 'NONE', #96, #1584, #596, .T. ) ; +#609 = VECTOR ( 'NONE', #703, 1000.000000000000000 ) ; +#610 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000005000, 7.500000000000000000, -24.17893218813454200 ) ) ; +#611 = FACE_OUTER_BOUND ( 'NONE', #1314, .T. ) ; +#612 = CYLINDRICAL_SURFACE ( 'NONE', #943, 5.000000000000000900 ) ; +#613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#614 = VERTEX_POINT ( 'NONE', #50 ) ; +#615 = CIRCLE ( 'NONE', #1023, 2.000000000000000000 ) ; +#616 = EDGE_LOOP ( 'NONE', ( #1564, #1574, #1577, #1515 ) ) ; +#617 = FACE_OUTER_BOUND ( 'NONE', #1012, .T. ) ; +#618 = LINE ( 'NONE', #1585, #605 ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -16.20653739809169000, 10.02821291984030700 ) ) ; +#620 = EDGE_CURVE ( 'NONE', #779, #1277, #588, .T. ) ; +#621 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#622 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#623 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -25.50000000000000400, 4.999999999999999100 ) ) ; +#624 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#625 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#626 = VECTOR ( 'NONE', #1323, 1000.000000000000000 ) ; +#627 = FACE_OUTER_BOUND ( 'NONE', #463, .T. ) ; +#628 = AXIS2_PLACEMENT_3D ( 'NONE', #1563, #789, #142 ) ; +#629 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#630 = CIRCLE ( 'NONE', #857, 0.5000000000000004400 ) ; +#631 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#632 = LINE ( 'NONE', #404, #626 ) ; +#633 = FACE_OUTER_BOUND ( 'NONE', #1051, .T. ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000003200, 2.500000000000000400, -24.17893218813454200 ) ) ; +#635 = TOROIDAL_SURFACE ( 'NONE', #597, 0.5000000000000000000, 2.000000000000000000 ) ; +#636 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000000, 15.00000000000000000 ) ) ; +#637 = VERTEX_POINT ( 'NONE', #560 ) ; +#638 = CYLINDRICAL_SURFACE ( 'NONE', #1112, 2.500000000000000400 ) ; +#639 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.80277563773198700, 9.368439310809765900 ) ) ; +#640 = VERTEX_POINT ( 'NONE', #1341 ) ; +#641 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.4766644911709406700, -0.8790852989652077100 ) ) ; +#642 = EDGE_CURVE ( 'NONE', #927, #1264, #572, .T. ) ; +#643 = PLANE ( 'NONE', #1182 ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -5.650706642057635100, 12.99999999999999800 ) ) ; +#645 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.024940778207618300, 13.36611375979593900 ) ) ; +#646 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.168404344971010300E-016, -0.0000000000000000000 ) ) ; +#647 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.848419889470653400, 13.69166122792734800 ) ) ; +#648 = TOROIDAL_SURFACE ( 'NONE', #1461, 0.5000000000000000000, 2.000000000000000000 ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 2.500000000000000400, -38.75000000000000000 ) ) ; +#650 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 1, ( + ( #580, #70 ), + ( #76, #970 ), + ( #182, #1101 ), + ( #316, #1228 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 2, 2 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000), + ( 0.6891881468402241100, 0.6891881468402241100), + ( 0.6891881468402241100, 0.6891881468402241100), + ( 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#651 = CYLINDRICAL_SURFACE ( 'NONE', #1201, 2.499999999999999600 ) ; +#652 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -6.542980537723935600, 12.01244373387206300 ) ) ; +#654 = AXIS2_PLACEMENT_3D ( 'NONE', #975, #443, #1616 ) ; +#655 = VECTOR ( 'NONE', #1311, 1000.000000000000000 ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.5000000000000001100, 4.034240641806529900E-018 ) ) ; +#657 = FACE_OUTER_BOUND ( 'NONE', #821, .T. ) ; +#658 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.848419889470654300, 13.69166122792734800 ) ) ; +#659 = FACE_OUTER_BOUND ( 'NONE', #1560, .T. ) ; +#660 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.976654441113646900, 13.45516551394658200 ) ) ; +#661 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.23688826215463100, 8.113205315711200100 ) ) ; +#662 = LINE ( 'NONE', #391, #655 ) ; +#663 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -1.734723475976808300E-016 ) ) ; +#664 = FACE_OUTER_BOUND ( 'NONE', #1367, .T. ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.417960657610063200, 11.08331309699862500 ) ) ; +#666 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999814000, -8.755738599199814200, 12.57119687231405600 ) ) ; +#667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#668 = EDGE_CURVE ( 'NONE', #1013, #1578, #574, .T. ) ; +#669 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.08157245239163100, 11.15941459203116700 ) ) ; +#670 = AXIS2_PLACEMENT_3D ( 'NONE', #1531, #765, #10 ) ; +#671 = FACE_OUTER_BOUND ( 'NONE', #616, .T. ) ; +#672 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.14012574002615500, 8.428476754344176300 ) ) ; +#673 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.23688826215462700, 8.113205315711198300 ) ) ; +#674 = ORIENTED_EDGE ( 'NONE', *, *, #1623, .F. ) ; +#675 = VECTOR ( 'NONE', #808, 1000.000000000000000 ) ; +#676 = EDGE_CURVE ( 'NONE', #1084, #1417, #583, .T. ) ; +#677 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#678 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.59976296162923500, 10.01653210532344800 ) ) ; +#679 = FACE_OUTER_BOUND ( 'NONE', #299, .T. ) ; +#680 = LINE ( 'NONE', #683, #675 ) ; +#681 = EDGE_LOOP ( 'NONE', ( #467, #1147, #1620, #1244, #1068, #1452, #893, #961 ) ) ; +#682 = CIRCLE ( 'NONE', #1403, 2.000000000000000000 ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -5.650706642057635100, 13.00000000000000000 ) ) ; +#684 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#685 = ORIENTED_EDGE ( 'NONE', *, *, #608, .F. ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -20.41252044606545000, 10.20108969088206800 ) ) ; +#687 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.5000000000000004400, -38.75000000000000000 ) ) ; +#688 = CYLINDRICAL_SURFACE ( 'NONE', #628, 2.000000000000000000 ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 6.000000000000000000 ) ) ; +#690 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 11.48913988196212400, -36.55868809443030200 ) ) ; +#691 = VECTOR ( 'NONE', #1446, 1000.000000000000000 ) ; +#692 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#693 = TOROIDAL_SURFACE ( 'NONE', #806, 0.5000000000000000000, 2.000000000000000000 ) ; +#694 = LINE ( 'NONE', #403, #691 ) ; +#695 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#696 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#697 = FACE_OUTER_BOUND ( 'NONE', #315, .T. ) ; +#698 = EDGE_CURVE ( 'NONE', #1342, #130, #568, .T. ) ; +#699 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#700 = FACE_OUTER_BOUND ( 'NONE', #99, .T. ) ; +#701 = CIRCLE ( 'NONE', #559, 2.500000000000000400 ) ; +#702 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 8.673617379884041600E-017 ) ) ; +#703 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9189179526551406500, 0.3944487245360096500 ) ) ; +#705 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#706 = EDGE_CURVE ( 'NONE', #1584, #994, #585, .T. ) ; +#707 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #111, #222, ( #1627 ) ) ; +#708 = CIRCLE ( 'NONE', #717, 2.500000000000000400 ) ; +#709 = VECTOR ( 'NONE', #341, 1000.000000000000000 ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 5.242189406417884900, -38.75000000000000000 ) ) ; +#711 = CIRCLE ( 'NONE', #470, 2.500000000000000400 ) ; +#712 = CIRCLE ( 'NONE', #374, 0.5000000000000004400 ) ; +#713 = VERTEX_POINT ( 'NONE', #571 ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -25.49999999999999600, 8.908980334482196300 ) ) ; +#715 = VECTOR ( 'NONE', #607, 1000.000000000000000 ) ; +#716 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 3.964466094067281800, -27.71446609406729400 ) ) ; +#717 = AXIS2_PLACEMENT_3D ( 'NONE', #797, #28, #917 ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#719 = CIRCLE ( 'NONE', #880, 2.000000000000000000 ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#721 = VECTOR ( 'NONE', #448, 1000.000000000000000 ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -14.30216336995585600, 10.24628493136413900 ) ) ; +#723 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 2.500000000000000400, -38.75000000000000000 ) ) ; +#724 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 15.00000000000000200, -38.75000000000000000 ) ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -8.248749211882776300, 13.07952358315708700 ) ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#727 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.98395292476766700, 10.00298150381354600 ) ) ; +#728 = EDGE_CURVE ( 'NONE', #1264, #1593, #542, .T. ) ; +#729 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -14.75684620364582700, 10.17758307915381100 ) ) ; +#730 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#731 = CYLINDRICAL_SURFACE ( 'NONE', #654, 5.000000000000000900 ) ; +#732 = MANIFOLD_SOLID_BREP ( 'Fillet13', #1259 ) ; +#733 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -21.54510234317944400, 8.364007776242473800 ) ) ; +#734 = CIRCLE ( 'NONE', #972, 10.00000000000000200 ) ; +#735 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -9.505456136875942300, 11.95865453061662700 ) ) ; +#736 = LINE ( 'NONE', #473, #715 ) ; +#737 = LINE ( 'NONE', #864, #709 ) ; +#738 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#739 = VERTEX_POINT ( 'NONE', #831 ) ; +#740 = FACE_OUTER_BOUND ( 'NONE', #1200, .T. ) ; +#741 = EDGE_LOOP ( 'NONE', ( #1260, #1262, #1271, #1273 ) ) ; +#742 = LINE ( 'NONE', #582, #749 ) ; +#743 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.51034736420840000, 8.874305261825163900 ) ) ; +#744 = AXIS2_PLACEMENT_3D ( 'NONE', #1472, #702, #1599 ) ; +#745 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 11.40898033448219600 ) ) ; +#746 = FACE_OUTER_BOUND ( 'NONE', #421, .T. ) ; +#747 = DIRECTION ( 'NONE', ( 1.734723475976806800E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#748 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -14.04184262296403100, 10.29255477223612800 ) ) ; +#749 = VECTOR ( 'NONE', #1489, 1000.000000000000000 ) ; +#750 = EDGE_CURVE ( 'NONE', #1584, #640, #563, .T. ) ; +#751 = VECTOR ( 'NONE', #413, 1000.000000000000000 ) ; +#752 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#753 = LINE ( 'NONE', #1331, #751 ) ; +#754 = AXIS2_PLACEMENT_3D ( 'NONE', #245, #1163, #377 ) ; +#755 = VECTOR ( 'NONE', #1198, 999.9999999999998900 ) ; +#756 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#757 = LINE ( 'NONE', #42, #755 ) ; +#758 = CIRCLE ( 'NONE', #290, 2.000000000000000000 ) ; +#759 = LINE ( 'NONE', #724, #721 ) ; +#760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#761 = EDGE_CURVE ( 'NONE', #505, #959, #544, .T. ) ; +#762 = DATE_TIME_ROLE ( 'classification_date' ) ; +#763 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#764 = CC_DESIGN_APPROVAL ( #578, ( #1001 ) ) ; +#765 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -1.224646799147353200E-016 ) ) ; +#766 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -27.50000000000000000, 8.908980334482196300 ) ) ; +#767 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#768 = CYLINDRICAL_SURFACE ( 'NONE', #1232, 2.000000000000000000 ) ; +#769 = AXIS2_PLACEMENT_3D ( 'NONE', #30, #921, #145 ) ; +#770 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#771 = FACE_OUTER_BOUND ( 'NONE', #1534, .T. ) ; +#772 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#773 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #69, #762, ( #1001 ) ) ; +#774 = CIRCLE ( 'NONE', #398, 2.500000000000000400 ) ; +#775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#776 = CIRCLE ( 'NONE', #490, 0.5000000000000004400 ) ; +#777 = LINE ( 'NONE', #1639, #780 ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -25.49999999999999600, 8.908980334482196300 ) ) ; +#779 = VERTEX_POINT ( 'NONE', #1608 ) ; +#780 = VECTOR ( 'NONE', #347, 1000.000000000000000 ) ; +#781 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -12.11727336397996000, 10.78082108094077200 ) ) ; +#782 = VECTOR ( 'NONE', #877, 1000.000000000000000 ) ; +#783 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -7.108454269819223000, 11.37847331706463000 ) ) ; +#784 = EDGE_CURVE ( 'NONE', #1644, #1316, #548, .T. ) ; +#785 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.068481283613056700E-018, -1.000000000000000000 ) ) ; +#786 = CARTESIAN_POINT ( 'NONE', ( 7.487882566613359400E-013, -7.976654442290954000, 13.45516551457883400 ) ) ; +#787 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.296089456550043400, 12.35871291200829700 ) ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.50966165280715700, 8.018177281315875100 ) ) ; +#789 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.755738599182805600, 12.57119687229602400 ) ) ; +#791 = LINE ( 'NONE', #484, #792 ) ; +#792 = VECTOR ( 'NONE', #935, 1000.000000000000000 ) ; +#793 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.01387818865996900, 11.20627521612004800 ) ) ; +#794 = EDGE_CURVE ( 'NONE', #1222, #903, #528, .T. ) ; +#795 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#796 = LINE ( 'NONE', #1390, #782 ) ; +#797 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 6.000000000000000000 ) ) ; +#798 = CIRCLE ( 'NONE', #9, 2.000000000000000000 ) ; +#799 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.70949422095146800, 9.154272716738274700 ) ) ; +#800 = CIRCLE ( 'NONE', #229, 2.499999999999999600 ) ; +#801 = TOROIDAL_SURFACE ( 'NONE', #49, 0.5000000000000000000, 2.000000000000000000 ) ; +#802 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -13.55590000447497100, 10.38721618314672100 ) ) ; +#803 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.31164176175997800, 9.312325625971691800 ) ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.14012574021799500, 8.428476755116753000 ) ) ; +#805 = CIRCLE ( 'NONE', #83, 0.5000000000000004400 ) ; +#806 = AXIS2_PLACEMENT_3D ( 'NONE', #1370, #591, #1494 ) ; +#807 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.93233976002446200, 8.003279708812137000 ) ) ; +#808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#809 = VECTOR ( 'NONE', #239, 1000.000000000000000 ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -21.16249870389172100, 10.32940931538612300 ) ) ; +#811 = CYLINDRICAL_SURFACE ( 'NONE', #153, 2.000000000000000000 ) ; +#812 = FACE_OUTER_BOUND ( 'NONE', #934, .T. ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#814 = VECTOR ( 'NONE', #506, 1000.000000000000000 ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 13.88695699409810800, -34.64043440472151800 ) ) ; +#816 = EDGE_CURVE ( 'NONE', #1383, #1133, #520, .T. ) ; +#817 = LINE ( 'NONE', #1156, #814 ) ; +#818 = VECTOR ( 'NONE', #904, 1000.000000000000000 ) ; +#819 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#820 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#821 = EDGE_LOOP ( 'NONE', ( #914, #1495, #1193, #1336 ) ) ; +#822 = LINE ( 'NONE', #19, #818 ) ; +#823 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#824 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 8.908980334482196300 ) ) ; +#825 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1049 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1005, #219, #1136 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#826 = ADVANCED_FACE ( 'NONE', ( #540 ), #650, .F. ) ; +#827 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 6.000000000000000000 ) ) ; +#828 = LINE ( 'NONE', #1166, #809 ) ; +#829 = TOROIDAL_SURFACE ( 'NONE', #129, 0.5000000000000000000, 2.000000000000000000 ) ; +#830 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -27.50000000000000000, 4.999999999999999100 ) ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.848419889470654300, 13.69166122792734800 ) ) ; +#832 = CYLINDRICAL_SURFACE ( 'NONE', #1633, 2.000000000000000000 ) ; +#833 = FACE_OUTER_BOUND ( 'NONE', #1029, .T. ) ; +#834 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#835 = VECTOR ( 'NONE', #1205, 1000.000000000000000 ) ; +#836 = EDGE_CURVE ( 'NONE', #958, #505, #499, .T. ) ; +#837 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#838 = LINE ( 'NONE', #286, #835 ) ; +#839 = AXIS2_PLACEMENT_3D ( 'NONE', #1028, #240, #1160 ) ; +#840 = VECTOR ( 'NONE', #566, 999.9999999999998900 ) ; +#841 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#842 = AXIS2_PLACEMENT_3D ( 'NONE', #280, #1194, #409 ) ; +#843 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#844 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.01387818865996900, 11.20627521612004800 ) ) ; +#845 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 6.000000000000000000 ) ) ; +#846 = EDGE_CURVE ( 'NONE', #1381, #869, #501, .T. ) ; +#847 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -13.97138778027139800, 8.272114272201745800 ) ) ; +#848 = FACE_OUTER_BOUND ( 'NONE', #862, .T. ) ; +#849 = CIRCLE ( 'NONE', #744, 0.5000000000000004400 ) ; +#850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#851 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.848419889470654300, 13.69166122792734800 ) ) ; +#852 = FACE_OUTER_BOUND ( 'NONE', #1407, .T. ) ; +#853 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#854 = FACE_OUTER_BOUND ( 'NONE', #196, .T. ) ; +#855 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -18.13438209179736300, 9.995355174378627100 ) ) ; +#856 = VECTOR ( 'NONE', #1030, 1000.000000000000000 ) ; +#857 = AXIS2_PLACEMENT_3D ( 'NONE', #537, #1444, #677 ) ; +#858 = LINE ( 'NONE', #1289, #856 ) ; +#859 = LINE ( 'NONE', #1209, #840 ) ; +#860 = AXIS2_PLACEMENT_3D ( 'NONE', #1206, #288, #1468 ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -22.63442504618632600, 10.68985947085248100 ) ) ; +#862 = EDGE_LOOP ( 'NONE', ( #1396, #1397, #127, #1402 ) ) ; +#863 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -10.09962527885331300, 11.60806680872068100 ) ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.0000000000000000000, 15.00000000000000000 ) ) ; +#865 = EDGE_CURVE ( 'NONE', #739, #1277, #516, .T. ) ; +#866 = ORIENTED_EDGE ( 'NONE', *, *, #1506, .T. ) ; +#867 = ORIENTED_EDGE ( 'NONE', *, *, #1103, .F. ) ; +#868 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -27.50000000000000000, 4.999999999999999100 ) ) ; +#869 = VERTEX_POINT ( 'NONE', #39 ) ; +#870 = ORIENTED_EDGE ( 'NONE', *, *, #894, .F. ) ; +#871 = ORIENTED_EDGE ( 'NONE', *, *, #1532, .T. ) ; +#872 = ORIENTED_EDGE ( 'NONE', *, *, #282, .T. ) ; +#873 = EDGE_CURVE ( 'NONE', #959, #713, #498, .T. ) ; +#874 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#875 = PRODUCT ( 'Trigger', 'Trigger', '', ( #1523 ) ) ; +#876 = ORIENTED_EDGE ( 'NONE', *, *, #794, .F. ) ; +#877 = DIRECTION ( 'NONE', ( 8.673617379884040400E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#878 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #87, #491, ( #133 ) ) ; +#879 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #4 ) ; +#880 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #998, #208 ) ; +#881 = ORIENTED_EDGE ( 'NONE', *, *, #928, .T. ) ; +#882 = APPROVAL_ROLE ( '' ) ; +#883 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ; +#884 = ORIENTED_EDGE ( 'NONE', *, *, #3, .F. ) ; +#885 = ORIENTED_EDGE ( 'NONE', *, *, #1212, .T. ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.99999999999999300, 9.408980334482196300 ) ) ; +#887 = ORIENTED_EDGE ( 'NONE', *, *, #1093, .T. ) ; +#888 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -27.50000000000000000, 0.0000000000000000000 ) ) ; +#889 = ORIENTED_EDGE ( 'NONE', *, *, #523, .T. ) ; +#890 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -12.63435292114868800, 10.61466953246390200 ) ) ; +#891 = ORIENTED_EDGE ( 'NONE', *, *, #1394, .T. ) ; +#892 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#893 = ORIENTED_EDGE ( 'NONE', *, *, #794, .T. ) ; +#894 = EDGE_CURVE ( 'NONE', #190, #637, #492, .T. ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -27.50000000000000000, 8.908980334482196300 ) ) ; +#896 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008268100, 13.88695699409810700, -34.64043440472151800 ) ) ; +#897 = ADVANCED_FACE ( 'NONE', ( #483 ), #478, .T. ) ; +#898 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#899 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, -38.75000000000000000 ) ) ; +#900 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999997000, -7.580573099881788400, 10.94139169563724300 ) ) ; +#901 = ORIENTED_EDGE ( 'NONE', *, *, #1047, .T. ) ; +#902 = EDGE_CURVE ( 'NONE', #130, #1013, #480, .T. ) ; +#903 = VERTEX_POINT ( 'NONE', #1328 ) ; +#904 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.542980539081853000, 12.01244373497981700 ) ) ; +#906 = ORIENTED_EDGE ( 'NONE', *, *, #784, .T. ) ; +#907 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -8.137585484809083200, 13.22667284711761900 ) ) ; +#908 = ORIENTED_EDGE ( 'NONE', *, *, #3, .T. ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000004100, -18.19783459398329100, 7.994890595618255000 ) ) ; +#910 = VERTEX_POINT ( 'NONE', #815 ) ; +#911 = ORIENTED_EDGE ( 'NONE', *, *, #170, .T. ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.876261603717763300, 12.46582718872070000 ) ) ; +#913 = ORIENTED_EDGE ( 'NONE', *, *, #1348, .T. ) ; +#914 = ORIENTED_EDGE ( 'NONE', *, *, #103, .F. ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 9.408980334482196300 ) ) ; +#916 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, -24.99999999999999300, 8.908980334482196300 ) ) ; +#917 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#918 = EDGE_CURVE ( 'NONE', #60, #1161, #496, .T. ) ; +#919 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -11.42257890489220000, 11.02367689080120500 ) ) ; +#920 = AXIS2_PLACEMENT_3D ( 'NONE', #644, #1541, #775 ) ; +#921 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#922 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.30216336997164500, 10.24628493148400400 ) ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -8.412502427677703000, 10.27080130694119800 ) ) ; +#924 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.51034736436576400, 8.874305262466936700 ) ) ; +#925 = ORIENTED_EDGE ( 'NONE', *, *, #1646, .T. ) ; +#926 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -20.51810920348292200, 10.21903381801286800 ) ) ; +#927 = VERTEX_POINT ( 'NONE', #556 ) ; +#928 = EDGE_CURVE ( 'NONE', #1222, #552, #489, .T. ) ; +#929 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 12.07106781186551100, -28.75000000000000000 ) ) ; +#930 = EDGE_LOOP ( 'NONE', ( #685, #1345, #281, #1138 ) ) ; +#931 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -16.98395292476742900, 10.00298150377745200 ) ) ; +#932 = ORIENTED_EDGE ( 'NONE', *, *, #956, .T. ) ; +#933 = AXIS2_PLACEMENT_3D ( 'NONE', #1471, #695, #63 ) ; +#934 = EDGE_LOOP ( 'NONE', ( #1428, #1433, #1434, #1440 ) ) ; +#935 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#936 = PLANE ( 'NONE', #1321 ) ; +#937 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#938 = ORIENTED_EDGE ( 'NONE', *, *, #511, .T. ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -23.20324252826955600, 8.770058589296631600 ) ) ; +#940 = ORIENTED_EDGE ( 'NONE', *, *, #1181, .T. ) ; +#941 = VERTEX_POINT ( 'NONE', #690 ) ; +#942 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#943 = AXIS2_PLACEMENT_3D ( 'NONE', #929, #265, #399 ) ; +#944 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5000000000000004400, -38.75000000000000000 ) ) ; +#946 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #79, #1401, ( #133 ) ) ; +#947 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000004100, 5.242189406417884000, -28.74999999999999600 ) ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#949 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.5000000000000004400, -38.75000000000000000 ) ) ; +#950 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000000, 12.49999999999999800 ) ) ; +#951 = VERTEX_POINT ( 'NONE', #52 ) ; +#952 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ; +#953 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#954 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#955 = ORIENTED_EDGE ( 'NONE', *, *, #34, .F. ) ; +#956 = EDGE_CURVE ( 'NONE', #614, #1144, #58, .T. ) ; +#957 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#958 = VERTEX_POINT ( 'NONE', #1290 ) ; +#959 = VERTEX_POINT ( 'NONE', #521 ) ; +#960 = ORIENTED_EDGE ( 'NONE', *, *, #668, .F. ) ; +#961 = ORIENTED_EDGE ( 'NONE', *, *, #1600, .F. ) ; +#962 = ORIENTED_EDGE ( 'NONE', *, *, #305, .T. ) ; +#963 = EDGE_LOOP ( 'NONE', ( #1384, #1385, #1152, #1391 ) ) ; +#964 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 12.07106781186551100, -33.75000000000000000 ) ) ; +#965 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 0.5000000000000004400, -38.75000000000000000 ) ) ; +#966 = EDGE_CURVE ( 'NONE', #1597, #352, #468, .T. ) ; +#967 = DESIGN_CONTEXT ( 'detailed design', #4, 'design' ) ; +#968 = ORIENTED_EDGE ( 'NONE', *, *, #215, .T. ) ; +#969 = VERTEX_POINT ( 'NONE', #510 ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999998800, -17.80743157155046000, 8.542136437520694500 ) ) ; +#971 = ORIENTED_EDGE ( 'NONE', *, *, #163, .T. ) ; +#972 = AXIS2_PLACEMENT_3D ( 'NONE', #947, #1123, #334 ) ; +#973 = ORIENTED_EDGE ( 'NONE', *, *, #1155, .T. ) ; +#974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#975 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 7.500000000000000000, -24.17893218813454200 ) ) ; +#976 = EDGE_LOOP ( 'NONE', ( #1090, #1092, #1094, #1486, #598, #1096 ) ) ; +#977 = ORIENTED_EDGE ( 'NONE', *, *, #549, .T. ) ; +#978 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.44527532635813200, 10.10274430803851900 ) ) ; +#979 = VERTEX_POINT ( 'NONE', #793 ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 5.000000000000000000 ) ) ; +#981 = VERTEX_POINT ( 'NONE', #1177 ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -8.756650239989193500, 12.55600763148912300 ) ) ; +#983 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -18.19783459398828600, 7.994890595535682800 ) ) ; +#985 = EDGE_CURVE ( 'NONE', #352, #1342, #462, .T. ) ; +#986 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 6.000000000000000000 ) ) ; +#987 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -23.34718519476548700, 10.92009493164642100 ) ) ; +#988 = ORIENTED_EDGE ( 'NONE', *, *, #384, .T. ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -9.146021868228379100, 9.844898012964055300 ) ) ; +#990 = AXIS2_PLACEMENT_3D ( 'NONE', #1609, #841, #73 ) ; +#991 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008308600, 14.07460947032089600, -34.25000000000000000 ) ) ; +#993 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .F. ) ; +#994 = VERTEX_POINT ( 'NONE', #390 ) ; +#995 = EDGE_CURVE ( 'NONE', #1578, #1644, #458, .T. ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 2.500000000000000000, -38.75000000000000000 ) ) ; +#997 = VERTEX_POINT ( 'NONE', #85 ) ; +#998 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#999 = ORIENTED_EDGE ( 'NONE', *, *, #335, .T. ) ; +#1000 = ORIENTED_EDGE ( 'NONE', *, *, #584, .T. ) ; +#1001 = SECURITY_CLASSIFICATION ( '', '', #629 ) ; +#1002 = ORIENTED_EDGE ( 'NONE', *, *, #1439, .T. ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -23.34199067556340200, 10.91786516622729600 ) ) ; +#1004 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger', ( #732, #1572 ), #825 ) ; +#1005 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1006 = EDGE_CURVE ( 'NONE', #951, #1480, #464, .T. ) ; +#1007 = ORIENTED_EDGE ( 'NONE', *, *, #1246, .T. ) ; +#1008 = AXIS2_PLACEMENT_3D ( 'NONE', #601, #1501, #730 ) ; +#1009 = ORIENTED_EDGE ( 'NONE', *, *, #181, .T. ) ; +#1010 = APPROVAL_ROLE ( '' ) ; +#1011 = ORIENTED_EDGE ( 'NONE', *, *, #1485, .F. ) ; +#1012 = EDGE_LOOP ( 'NONE', ( #1604, #1607, #1636, #1483 ) ) ; +#1013 = VERTEX_POINT ( 'NONE', #26 ) ; +#1014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1015 = VERTEX_POINT ( 'NONE', #531 ) ; +#1016 = EDGE_CURVE ( 'NONE', #994, #1215, #485, .T. ) ; +#1017 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1018 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ; +#1019 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 11.48913988196212400, -36.55868809443030200 ) ) ; +#1020 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1021 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -5.650706642057635100, 15.00000000000000000 ) ) ; +#1022 = CARTESIAN_POINT ( 'NONE', ( 7.898400000000001400, -10.92599198487987900, 11.22607764571064100 ) ) ; +#1023 = AXIS2_PLACEMENT_3D ( 'NONE', #813, #43, #944 ) ; +#1024 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1025 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.01387818865996900, 11.20627521612004800 ) ) ; +#1026 = AXIS2_PLACEMENT_3D ( 'NONE', #1142, #1017, #1405 ) ; +#1027 = EDGE_LOOP ( 'NONE', ( #1210, #1213, #595, #1217, #1219, #1221, #178, #1230, #1231, #1234 ) ) ; +#1028 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.650706642057635100, 12.49999999999999600 ) ) ; +#1029 = EDGE_LOOP ( 'NONE', ( #1197, #1640, #1645, #1637 ) ) ; +#1030 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1031 = ORIENTED_EDGE ( 'NONE', *, *, #1038, .F. ) ; +#1032 = ORIENTED_EDGE ( 'NONE', *, *, #1224, .F. ) ; +#1033 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1034 = ORIENTED_EDGE ( 'NONE', *, *, #74, .T. ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -9.146021867520103000, 9.844898011812244200 ) ) ; +#1036 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ; +#1037 = VERTEX_POINT ( 'NONE', #1629 ) ; +#1038 = EDGE_CURVE ( 'NONE', #96, #1463, #441, .T. ) ; +#1039 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 8.068481283613056700E-018 ) ) ; +#1040 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.137585484784187500, 13.22667284709664100 ) ) ; +#1041 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.426816143438403000, 12.89430977557623100 ) ) ; +#1042 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -20.71176587879800500, 8.221972889820746000 ) ) ; +#1043 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1044 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.412502425547025100, 10.27080130347495100 ) ) ; +#1045 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1046 = ORIENTED_EDGE ( 'NONE', *, *, #1474, .T. ) ; +#1047 = EDGE_CURVE ( 'NONE', #1522, #1644, #451, .T. ) ; +#1048 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 12.49999999999999800 ) ) ; +#1049 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1005, 'distance_accuracy_value', 'NONE'); +#1050 = ORIENTED_EDGE ( 'NONE', *, *, #995, .F. ) ; +#1051 = EDGE_LOOP ( 'NONE', ( #1602, #1558, #249, #1618 ) ) ; +#1052 = ORIENTED_EDGE ( 'NONE', *, *, #584, .F. ) ; +#1053 = ADVANCED_FACE ( 'NONE', ( #452 ), #431, .T. ) ; +#1054 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1055 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.23688826213049200, 8.113205315612550100 ) ) ; +#1056 = ORIENTED_EDGE ( 'NONE', *, *, #1474, .F. ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.417960658116682800, 11.08331309741161300 ) ) ; +#1058 = ORIENTED_EDGE ( 'NONE', *, *, #706, .F. ) ; +#1059 = ORIENTED_EDGE ( 'NONE', *, *, #750, .T. ) ; +#1060 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -22.64703816502844400, 10.69497141693869600 ) ) ; +#1061 = AXIS2_PLACEMENT_3D ( 'NONE', #1077, #287, #311 ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 15.00000000000000200, -33.75000000000000000 ) ) ; +#1063 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -18.13438209179688300, 9.995355174306439500 ) ) ; +#1064 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.7071067811865440200, 0.7071067811865511300 ) ) ; +#1065 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010300E-016, 0.0000000000000000000 ) ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -22.63442504634681600, 10.68985947019709200 ) ) ; +#1067 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1068 = ORIENTED_EDGE ( 'NONE', *, *, #144, .T. ) ; +#1069 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1070 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -25.50000000000000400, 4.999999999999999100 ) ) ; +#1071 = EDGE_CURVE ( 'NONE', #1015, #951, #435, .T. ) ; +#1072 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .T. ) ; +#1073 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1074 = ORIENTED_EDGE ( 'NONE', *, *, #1485, .T. ) ; +#1075 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #77, #1527, ( #1001 ) ) ; +#1076 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1077 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, 15.00000000000000000 ) ) ; +#1078 = EDGE_LOOP ( 'NONE', ( #1072, #1074, #1080, #1082, #1089 ) ) ; +#1079 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1080 = ORIENTED_EDGE ( 'NONE', *, *, #1224, .T. ) ; +#1081 = EDGE_LOOP ( 'NONE', ( #355, #866, #867, #870, #871, #872, #876, #881, #884, #885 ) ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #608, .T. ) ; +#1083 = EDGE_LOOP ( 'NONE', ( #1460, #1465, #1467, #1477 ) ) ; +#1084 = VERTEX_POINT ( 'NONE', #1634 ) ; +#1085 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 2.500000000000000400 ) ) ; +#1086 = EDGE_CURVE ( 'NONE', #1561, #927, #423, .T. ) ; +#1087 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.4766644911709406700, 0.8790852989652077100 ) ) ; +#1088 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 5.000000000000000000 ) ) ; +#1089 = ORIENTED_EDGE ( 'NONE', *, *, #706, .T. ) ; +#1090 = ORIENTED_EDGE ( 'NONE', *, *, #1511, .F. ) ; +#1091 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1092 = ORIENTED_EDGE ( 'NONE', *, *, #902, .T. ) ; +#1093 = EDGE_CURVE ( 'NONE', #1144, #1299, #433, .T. ) ; +#1094 = ORIENTED_EDGE ( 'NONE', *, *, #668, .T. ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1096 = ORIENTED_EDGE ( 'NONE', *, *, #114, .T. ) ; +#1097 = AXIS2_PLACEMENT_3D ( 'NONE', #726, #1625, #853 ) ; +#1098 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008509400, 15.00000000000000200, -33.75000000000000000 ) ) ; +#1099 = VERTEX_POINT ( 'NONE', #205 ) ; +#1100 = VERTEX_POINT ( 'NONE', #1251 ) ; +#1101 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999998800, -9.988832072364648000, 9.744220378943776200 ) ) ; +#1102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1103 = EDGE_CURVE ( 'NONE', #637, #1084, #415, .T. ) ; +#1104 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -15.83098092369486100, 10.06632461868510500 ) ) ; +#1105 = AXIS2_PLACEMENT_3D ( 'NONE', #1098, #310, #1227 ) ; +#1106 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000000, 4.999999999999999100 ) ) ; +#1107 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -9.636203360795375900, 11.90061888832404200 ) ) ; +#1108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1109 = ORIENTED_EDGE ( 'NONE', *, *, #1358, .T. ) ; +#1110 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -18.89856631675872100, 10.03399183862550400 ) ) ; +#1111 = ORIENTED_EDGE ( 'NONE', *, *, #698, .T. ) ; +#1112 = AXIS2_PLACEMENT_3D ( 'NONE', #916, #795, #1429 ) ; +#1113 = VERTEX_POINT ( 'NONE', #767 ) ; +#1114 = ORIENTED_EDGE ( 'NONE', *, *, #1511, .T. ) ; +#1115 = AXIS2_PLACEMENT_3D ( 'NONE', #636, #1284, #500 ) ; +#1116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1117 = VERTEX_POINT ( 'NONE', #639 ) ; +#1118 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.01793225539143600, 9.031542565270353200 ) ) ; +#1119 = VERTEX_POINT ( 'NONE', #1535 ) ; +#1120 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .T. ) ; +#1121 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -11.08157245239163100, 11.15941459203116700 ) ) ; +#1122 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#1123 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -1.734723475976808300E-016 ) ) ; +#1124 = VERTEX_POINT ( 'NONE', #495 ) ; +#1125 = ORIENTED_EDGE ( 'NONE', *, *, #836, .F. ) ; +#1126 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 2.500000000000000000, 6.000000000000000000 ) ) ; +#1127 = EDGE_CURVE ( 'NONE', #1624, #1133, #418, .T. ) ; +#1128 = AXIS2_PLACEMENT_3D ( 'NONE', #1293, #512, #1421 ) ; +#1129 = CARTESIAN_POINT ( 'NONE', ( 7.898400000000001400, -21.23008495547712100, 10.34404809676146900 ) ) ; +#1130 = ORIENTED_EDGE ( 'NONE', *, *, #1071, .T. ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, 4.999999999999999100 ) ) ; +#1132 = ORIENTED_EDGE ( 'NONE', *, *, #1387, .T. ) ; +#1133 = VERTEX_POINT ( 'NONE', #364 ) ; +#1134 = EDGE_LOOP ( 'NONE', ( #1365, #1375, #1377, #1380 ) ) ; +#1135 = EDGE_CURVE ( 'NONE', #997, #1161, #411, .T. ) ; +#1136 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1137 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ; +#1138 = ORIENTED_EDGE ( 'NONE', *, *, #750, .F. ) ; +#1139 = ORIENTED_EDGE ( 'NONE', *, *, #242, .F. ) ; +#1140 = DATE_TIME_ROLE ( 'creation_date' ) ; +#1141 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -7.848419889470654300, 13.69166122792734800 ) ) ; +#1142 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -25.50000000000000400, 0.0000000000000000000 ) ) ; +#1143 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1144 = VERTEX_POINT ( 'NONE', #1408 ) ; +#1145 = ORIENTED_EDGE ( 'NONE', *, *, #1334, .T. ) ; +#1146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1147 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ; +#1148 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1149 = ORIENTED_EDGE ( 'NONE', *, *, #894, .T. ) ; +#1150 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5000000000000001100, 4.034240641806529900E-018 ) ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -9.947498666469588400, 11.71453930734435300 ) ) ; +#1152 = ORIENTED_EDGE ( 'NONE', *, *, #257, .F. ) ; +#1153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1154 = EDGE_LOOP ( 'NONE', ( #56, #1191, #1481, #1002 ) ) ; +#1155 = EDGE_CURVE ( 'NONE', #779, #997, #402, .T. ) ; +#1156 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 5.000000000000000000 ) ) ; +#1157 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000000, 13.00000000000000000 ) ) ; +#1158 = ORIENTED_EDGE ( 'NONE', *, *, #344, .F. ) ; +#1159 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ; +#1160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1161 = VERTEX_POINT ( 'NONE', #1021 ) ; +#1162 = AXIS2_PLACEMENT_3D ( 'NONE', #718, #80, #974 ) ; +#1163 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -8.673617379884041600E-017 ) ) ; +#1164 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -10.70949422079413600, 9.154272716096494700 ) ) ; +#1165 = EDGE_CURVE ( 'NONE', #1320, #910, #396, .T. ) ; +#1166 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1167 = CARTESIAN_POINT ( 'NONE', ( 4.646453632810294800E-014, -8.426816143425954300, 12.89430977556574500 ) ) ; +#1168 = ORIENTED_EDGE ( 'NONE', *, *, #728, .T. ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.961041562251690400, 11.53203807000712700 ) ) ; +#1170 = EDGE_LOOP ( 'NONE', ( #1046, #1052, #1058, #1059 ) ) ; +#1171 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -23.20324252833486200, 8.770058588345319700 ) ) ; +#1172 = ORIENTED_EDGE ( 'NONE', *, *, #191, .T. ) ; +#1173 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -16.93040379126387800, 9.995140668482262600 ) ) ; +#1174 = ORIENTED_EDGE ( 'NONE', *, *, #1189, .T. ) ; +#1175 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -9.505456137804838300, 11.95865453176901000 ) ) ; +#1176 = ORIENTED_EDGE ( 'NONE', *, *, #836, .T. ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.01387818865996900, 11.20627521612004800 ) ) ; +#1178 = VERTEX_POINT ( 'NONE', #508 ) ; +#1179 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -19.03814334693832000, 8.037252147783986400 ) ) ; +#1180 = ORIENTED_EDGE ( 'NONE', *, *, #761, .T. ) ; +#1181 = EDGE_CURVE ( 'NONE', #1493, #1399, #417, .T. ) ; +#1182 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #772, #13 ) ; +#1183 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1184 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -15.44527532636602600, 10.10274430809844900 ) ) ; +#1185 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.961041562930649500, 11.53203807056100600 ) ) ; +#1186 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.01387818865996900, 11.20627521612004800 ) ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 15.00000000000000200, -38.75000000000000000 ) ) ; +#1188 = VERTEX_POINT ( 'NONE', #371 ) ; +#1189 = EDGE_CURVE ( 'NONE', #1100, #505, #393, .T. ) ; +#1190 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -19.03814334696033200, 8.037252147473093800 ) ) ; +#1191 = ORIENTED_EDGE ( 'NONE', *, *, #1254, .T. ) ; +#1192 = ORIENTED_EDGE ( 'NONE', *, *, #221, .F. ) ; +#1193 = ORIENTED_EDGE ( 'NONE', *, *, #1524, .F. ) ; +#1194 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976808300E-016 ) ) ; +#1195 = CARTESIAN_POINT ( 'NONE', ( -1.666118093593937800E-012, -23.34718519389340200, 10.92009493346553700 ) ) ; +#1196 = ORIENTED_EDGE ( 'NONE', *, *, #1310, .T. ) ; +#1197 = ORIENTED_EDGE ( 'NONE', *, *, #928, .F. ) ; +#1198 = DIRECTION ( 'NONE', ( -6.133173666733469400E-017, 0.7071067811865511300, -0.7071067811865440200 ) ) ; +#1199 = EDGE_LOOP ( 'NONE', ( #1274, #1275, #1281, #1291 ) ) ; +#1200 = EDGE_LOOP ( 'NONE', ( #1596, #1582, #11, #18 ) ) ; +#1201 = AXIS2_PLACEMENT_3D ( 'NONE', #1306, #524, #667 ) ; +#1202 = PLANE ( 'NONE', #408 ) ; +#1203 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1204 = ORIENTED_EDGE ( 'NONE', *, *, #384, .F. ) ; +#1205 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1206 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 5.242189406417884900, -28.74999999999999600 ) ) ; +#1207 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1025, #1003, #211, #1129, #343, #1261, #477, #1389, #619, #1516, #748, #890, #121, #1022, #237, #1151, #366, #1285, #502, #1410, #645, #38 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.002186061686054739900, 0.004372123372109479800, 0.006558185058164220200, 0.008744246744218959700, 0.01093030843027369800, 0.01311637011632844000, 0.01420940095935580700, 0.01530243180238317600, 0.01639546264541054400, 0.01748849348843791200 ), + .UNSPECIFIED. ) ; +#1208 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -8.673617379884041600E-017 ) ) ; +#1209 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 15.00000000000005000, -38.74999999999995000 ) ) ; +#1210 = ORIENTED_EDGE ( 'NONE', *, *, #432, .F. ) ; +#1211 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -27.50000000000000000, 4.999999999999999100 ) ) ; +#1212 = EDGE_CURVE ( 'NONE', #1316, #1037, #422, .T. ) ; +#1213 = ORIENTED_EDGE ( 'NONE', *, *, #344, .T. ) ; +#1214 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1215 = VERTEX_POINT ( 'NONE', #1295 ) ; +#1216 = AXIS2_PLACEMENT_3D ( 'NONE', #232, #1148, #363 ) ; +#1217 = ORIENTED_EDGE ( 'NONE', *, *, #221, .T. ) ; +#1218 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1219 = ORIENTED_EDGE ( 'NONE', *, *, #873, .T. ) ; +#1220 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -8.673617379884041600E-017 ) ) ; +#1221 = ORIENTED_EDGE ( 'NONE', *, *, #23, .T. ) ; +#1222 = VERTEX_POINT ( 'NONE', #649 ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000002300, 5.242189406417884900, -38.75000000000000000 ) ) ; +#1224 = EDGE_CURVE ( 'NONE', #198, #96, #376, .T. ) ; +#1225 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1226 = AXIS2_PLACEMENT_3D ( 'NONE', #845, #1233, #447 ) ; +#1227 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.7808688094430305000, -0.6246950475544240700 ) ) ; +#1228 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -7.848419889470654300, 13.69166122792734800 ) ) ; +#1229 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -12.47239079983300100, 10.67305241955643600 ) ) ; +#1230 = ORIENTED_EDGE ( 'NONE', *, *, #1600, .T. ) ; +#1231 = ORIENTED_EDGE ( 'NONE', *, *, #282, .F. ) ; +#1232 = AXIS2_PLACEMENT_3D ( 'NONE', #1122, #1250, #472 ) ; +#1233 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1234 = ORIENTED_EDGE ( 'NONE', *, *, #268, .T. ) ; +#1235 = ORIENTED_EDGE ( 'NONE', *, *, #34, .T. ) ; +#1236 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ; +#1237 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -15.66255172104391800, 8.073042939626121800 ) ) ; +#1238 = ORIENTED_EDGE ( 'NONE', *, *, #242, .T. ) ; +#1239 = PLANE ( 'NONE', #427 ) ; +#1240 = EDGE_LOOP ( 'NONE', ( #1322, #1009, #1325, #1338 ) ) ; +#1241 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999999600, -10.59151080115788400, 11.37749874967578900 ) ) ; +#1242 = ORIENTED_EDGE ( 'NONE', *, *, #1165, .T. ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -20.41252044606545000, 10.20108969088206800 ) ) ; +#1244 = ORIENTED_EDGE ( 'NONE', *, *, #676, .T. ) ; +#1245 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -7.417960657610063200, 11.08331309699862500 ) ) ; +#1246 = EDGE_CURVE ( 'NONE', #1099, #1188, #397, .T. ) ; +#1247 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1248 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -24.01387818865996600, 11.20627521612004400 ) ) ; +#1249 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -11.42257890489220000, 11.02367689080120500 ) ) ; +#1250 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1251 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 8.535533905932791000, -32.28553390593275900 ) ) ; +#1252 = ORIENTED_EDGE ( 'NONE', *, *, #1246, .F. ) ; +#1253 = ORIENTED_EDGE ( 'NONE', *, *, #432, .T. ) ; +#1254 = EDGE_CURVE ( 'NONE', #1124, #1299, #375, .T. ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -27.50000000000000000, 0.0000000000000000000 ) ) ; +#1256 = ORIENTED_EDGE ( 'NONE', *, *, #1557, .T. ) ; +#1257 = EDGE_LOOP ( 'NONE', ( #1109, #1111, #1114, #1120 ) ) ; +#1258 = AXIS2_PLACEMENT_3D ( 'NONE', #980, #324, #84 ) ; +#1259 = CLOSED_SHELL ( 'NONE', ( #1453, #515, #1443, #1580, #1350, #234, #561, #1404, #1562, #14, #471, #1356, #1424, #1566, #1470, #1587, #1606, #1416, #509, #1464, #1551, #1449, #897, #826, #1573, #476, #1053, #1337, #36, #1388, #93, #1368, #1329, #25, #44, #488, #168, #405, #457, #1309, #387, #453, #522, #262 ) ) ; +#1260 = ORIENTED_EDGE ( 'NONE', *, *, #1334, .F. ) ; +#1261 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -19.08855029898276700, 10.04984743555896500 ) ) ; +#1262 = ORIENTED_EDGE ( 'NONE', *, *, #1557, .F. ) ; +#1263 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1264 = VERTEX_POINT ( 'NONE', #634 ) ; +#1265 = PLANE ( 'NONE', #203 ) ; +#1266 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1267 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 2.500000000000000400 ) ) ; +#1268 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1395 ) ; +#1269 = EDGE_CURVE ( 'NONE', #1463, #640, #368, .T. ) ; +#1270 = AXIS2_PLACEMENT_3D ( 'NONE', #16, #898, #132 ) ; +#1271 = ORIENTED_EDGE ( 'NONE', *, *, #268, .F. ) ; +#1272 = APPROVAL_ROLE ( '' ) ; +#1273 = ORIENTED_EDGE ( 'NONE', *, *, #1532, .F. ) ; +#1274 = ORIENTED_EDGE ( 'NONE', *, *, #1071, .F. ) ; +#1275 = ORIENTED_EDGE ( 'NONE', *, *, #1387, .F. ) ; +#1276 = EDGE_CURVE ( 'NONE', #614, #739, #386, .T. ) ; +#1277 = VERTEX_POINT ( 'NONE', #1141 ) ; +#1278 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, 8.673617379884041600E-017 ) ) ; +#1279 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1280 = ORIENTED_EDGE ( 'NONE', *, *, #1212, .F. ) ; +#1281 = ORIENTED_EDGE ( 'NONE', *, *, #1310, .F. ) ; +#1282 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, 0.0000000000000000000, 15.00000000000000000 ) ) ; +#1283 = EDGE_LOOP ( 'NONE', ( #1007, #1502, #1011, #1018 ) ) ; +#1284 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -8.068481283613056700E-018 ) ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -9.042347097591862900, 12.31988535381376300 ) ) ; +#1286 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -5.650706642057635100, 12.49999999999999600 ) ) ; +#1287 = AXIS2_PLACEMENT_3D ( 'NONE', #317, #590, #850 ) ; +#1288 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.168404344971010100E-016, 1.173774534824853400E-032 ) ) ; +#1289 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1290 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 13.57460947032089400, -33.75000000000000000 ) ) ; +#1291 = ORIENTED_EDGE ( 'NONE', *, *, #1006, .F. ) ; +#1292 = ORIENTED_EDGE ( 'NONE', *, *, #1394, .F. ) ; +#1293 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 13.57460947032089400, -34.25000000000000000 ) ) ; +#1294 = ORIENTED_EDGE ( 'NONE', *, *, #865, .T. ) ; +#1295 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 10.00000000000000000, 6.000000000000000000 ) ) ; +#1296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9189179526551406500, -0.3944487245360096500 ) ) ; +#1297 = ORIENTED_EDGE ( 'NONE', *, *, #424, .T. ) ; +#1298 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -11.91503992045365500, 8.751661752685022200 ) ) ; +#1299 = VERTEX_POINT ( 'NONE', #886 ) ; +#1300 = EDGE_CURVE ( 'NONE', #869, #1326, #357, .T. ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.108454270325838200, 11.37847331747763100 ) ) ; +#1302 = ORIENTED_EDGE ( 'NONE', *, *, #1300, .T. ) ; +#1303 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000185300, -8.531220038051907700, 12.78530860088911900 ) ) ; +#1304 = VERTEX_POINT ( 'NONE', #1019 ) ; +#1305 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.80277563773198700, 9.368439310809765900 ) ) ; +#1306 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 6.000000000000000000 ) ) ; +#1307 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -5.650706642057635100, 12.49999999999999600 ) ) ; +#1308 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.09962527910458800, 11.60806680927063700 ) ) ; +#1309 = ADVANCED_FACE ( 'NONE', ( #358 ), #351, .T. ) ; +#1310 = EDGE_CURVE ( 'NONE', #1480, #958, #350, .T. ) ; +#1311 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1312 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.91503992054957600, 8.751661753071312300 ) ) ; +#1313 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -16.93233976002696700, 8.003279708770852700 ) ) ; +#1314 = EDGE_LOOP ( 'NONE', ( #999, #1529, #1510, #1302 ) ) ; +#1315 = ORIENTED_EDGE ( 'NONE', *, *, #1591, .T. ) ; +#1316 = VERTEX_POINT ( 'NONE', #504 ) ; +#1317 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.83098092370215500, 10.06632461879768000 ) ) ; +#1318 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.296111700706345200, 12.35867187469666300 ) ) ; +#1319 = ORIENTED_EDGE ( 'NONE', *, *, #139, .T. ) ; +#1320 = VERTEX_POINT ( 'NONE', #238 ) ; +#1321 = AXIS2_PLACEMENT_3D ( 'NONE', #152, #1064, #279 ) ; +#1322 = ORIENTED_EDGE ( 'NONE', *, *, #144, .F. ) ; +#1323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1324 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -18.89856631673351800, 10.03399183885383600 ) ) ; +#1325 = ORIENTED_EDGE ( 'NONE', *, *, #335, .F. ) ; +#1326 = VERTEX_POINT ( 'NONE', #123 ) ; +#1327 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.80277563773198700, 9.368439310809765900 ) ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1329 = ADVANCED_FACE ( 'NONE', ( #342 ), #348, .T. ) ; +#1330 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.80277563773198300, 9.368439310809765900 ) ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 15.00000000000000200, -33.75000000000000000 ) ) ; +#1332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1333 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.090249291540239100, 12.73833224558546600 ) ) ; +#1334 = EDGE_CURVE ( 'NONE', #941, #190, #370, .T. ) ; +#1335 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1336 = ORIENTED_EDGE ( 'NONE', *, *, #454, .F. ) ; +#1337 = ADVANCED_FACE ( 'NONE', ( #367 ), #330, .T. ) ; +#1338 = ORIENTED_EDGE ( 'NONE', *, *, #575, .T. ) ; +#1339 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1341 = CARTESIAN_POINT ( 'NONE', ( 2.449200000000000300, 2.500000000000000000, 4.999999999999999100 ) ) ; +#1342 = VERTEX_POINT ( 'NONE', #766 ) ; +#1343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1344 = ORIENTED_EDGE ( 'NONE', *, *, #1591, .F. ) ; +#1345 = ORIENTED_EDGE ( 'NONE', *, *, #1038, .T. ) ; +#1346 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976808300E-016 ) ) ; +#1347 = ORIENTED_EDGE ( 'NONE', *, *, #1524, .T. ) ; +#1348 = EDGE_CURVE ( 'NONE', #1113, #252, #333, .T. ) ; +#1349 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -27.50000000000000000, 4.999999999999999100 ) ) ; +#1350 = ADVANCED_FACE ( 'NONE', ( #338, #328 ), #12, .F. ) ; +#1351 = EDGE_LOOP ( 'NONE', ( #1238, #1242, #1253, #1256 ) ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000008200200, 13.57460947032089400, -34.25000000000000000 ) ) ; +#1353 = AXIS2_PLACEMENT_3D ( 'NONE', #297, #1346, #565 ) ; +#1354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1355 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -2.500000000000000000, 15.00000000000000000 ) ) ; +#1356 = ADVANCED_FACE ( 'NONE', ( #336 ), #643, .F. ) ; +#1357 = ORIENTED_EDGE ( 'NONE', *, *, #985, .T. ) ; +#1358 = EDGE_CURVE ( 'NONE', #1133, #1342, #320, .T. ) ; +#1359 = ORIENTED_EDGE ( 'NONE', *, *, #784, .F. ) ; +#1360 = ORIENTED_EDGE ( 'NONE', *, *, #1358, .F. ) ; +#1361 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1362 = ORIENTED_EDGE ( 'NONE', *, *, #1623, .T. ) ; +#1363 = CARTESIAN_POINT ( 'NONE', ( -0.001050000000007748100, 11.48913988196212400, -36.55868809443030200 ) ) ; +#1364 = ORIENTED_EDGE ( 'NONE', *, *, #356, .T. ) ; +#1365 = ORIENTED_EDGE ( 'NONE', *, *, #481, .F. ) ; +#1366 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -13.55590000447497100, 10.38721618314672100 ) ) ; +#1367 = EDGE_LOOP ( 'NONE', ( #988, #991, #993, #1000 ) ) ; +#1368 = ADVANCED_FACE ( 'NONE', ( #314 ), #308, .T. ) ; +#1369 = EDGE_CURVE ( 'NONE', #739, #869, #309, .T. ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -5.650706642057635100, 12.49999999999999600 ) ) ; +#1371 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.59976296162923500, 10.01653210532344800 ) ) ; +#1372 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -11.94167538489759800, 10.82102907452442300 ) ) ; +#1373 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 2.500000000000000400 ) ) ; +#1374 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -20.71176587877599200, 8.221972890131636900 ) ) ; +#1375 = ORIENTED_EDGE ( 'NONE', *, *, #362, .T. ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -8.876261603717763300, 12.46582718872070000 ) ) ; +#1377 = ORIENTED_EDGE ( 'NONE', *, *, #865, .F. ) ; +#1378 = AXIS2_PLACEMENT_3D ( 'NONE', #1475, #704, #1603 ) ; +#1379 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, -5.650706642057635100, 12.49999999999999600 ) ) ; +#1380 = ORIENTED_EDGE ( 'NONE', *, *, #1369, .T. ) ; +#1381 = VERTEX_POINT ( 'NONE', #507 ) ; +#1382 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -10.70949422095146800, 9.154272716738274700 ) ) ; +#1383 = VERTEX_POINT ( 'NONE', #778 ) ; +#1384 = ORIENTED_EDGE ( 'NONE', *, *, #902, .F. ) ; +#1385 = ORIENTED_EDGE ( 'NONE', *, *, #698, .F. ) ; +#1386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1387 = EDGE_CURVE ( 'NONE', #958, #1015, #313, .T. ) ; +#1388 = ADVANCED_FACE ( 'NONE', ( #318 ), #200, .T. ) ; +#1389 = CARTESIAN_POINT ( 'NONE', ( 7.898400000000001400, -16.93040379126388500, 9.995140668482267900 ) ) ; +#1390 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000001900, 2.500000000000000000, -38.75000000000000000 ) ) ; +#1391 = ORIENTED_EDGE ( 'NONE', *, *, #305, .F. ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 2.500000000000000000, 5.000000000000000000 ) ) ; +#1393 = ORIENTED_EDGE ( 'NONE', *, *, #103, .T. ) ; +#1394 = EDGE_CURVE ( 'NONE', #1299, #1383, #302, .T. ) ; +#1395 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1396 = ORIENTED_EDGE ( 'NONE', *, *, #966, .F. ) ; +#1397 = ORIENTED_EDGE ( 'NONE', *, *, #215, .F. ) ; +#1398 = AXIS2_PLACEMENT_3D ( 'NONE', #345, #1263, #479 ) ; +#1399 = VERTEX_POINT ( 'NONE', #945 ) ; +#1400 = EDGE_LOOP ( 'NONE', ( #887, #891, #889, #901, #906, #908, #911, #913, #54, #925, #932 ) ) ; +#1401 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#1402 = ORIENTED_EDGE ( 'NONE', *, *, #985, .F. ) ; +#1403 = AXIS2_PLACEMENT_3D ( 'NONE', #378, #1296, #513 ) ; +#1404 = ADVANCED_FACE ( 'NONE', ( #303 ), #158, .F. ) ; +#1405 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1406 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -6.090249291540239100, 12.73833224558546600 ) ) ; +#1407 = EDGE_LOOP ( 'NONE', ( #1478, #1484, #1498, #1504 ) ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -24.80277563773198700, 9.368439310809765900 ) ) ; +#1409 = ORIENTED_EDGE ( 'NONE', *, *, #454, .T. ) ; +#1410 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999997900, -8.248749211882781700, 13.07952358315708200 ) ) ; +#1411 = ORIENTED_EDGE ( 'NONE', *, *, #424, .F. ) ; +#1412 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002800, 13.57460947032089400, -33.75000000000000000 ) ) ; +#1413 = EDGE_CURVE ( 'NONE', #713, #1100, #300, .T. ) ; +#1414 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1415 = ORIENTED_EDGE ( 'NONE', *, *, #444, .F. ) ; +#1416 = ADVANCED_FACE ( 'NONE', ( #295 ), #293, .F. ) ; +#1417 = VERTEX_POINT ( 'NONE', #950 ) ; +#1418 = ORIENTED_EDGE ( 'NONE', *, *, #620, .F. ) ; +#1419 = EDGE_LOOP ( 'NONE', ( #1500, #674, #1533, #1292 ) ) ; +#1420 = ORIENTED_EDGE ( 'NONE', *, *, #163, .F. ) ; +#1421 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1422 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.090249291540238200, 12.73833224558546800 ) ) ; +#1423 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -13.97138778022312900, 8.272114272004451200 ) ) ; +#1424 = ADVANCED_FACE ( 'NONE', ( #278 ), #272, .T. ) ; +#1425 = EDGE_CURVE ( 'NONE', #1119, #60, #275, .T. ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -8.531220038068916300, 12.78530860090714700 ) ) ; +#1427 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -8.755738599182805600, 12.57119687229602400 ) ) ; +#1428 = ORIENTED_EDGE ( 'NONE', *, *, #620, .T. ) ; +#1429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1431 = ORIENTED_EDGE ( 'NONE', *, *, #1165, .F. ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -10.31164176140583400, 9.312325625395788000 ) ) ; +#1433 = ORIENTED_EDGE ( 'NONE', *, *, #362, .F. ) ; +#1434 = ORIENTED_EDGE ( 'NONE', *, *, #1135, .F. ) ; +#1435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1436 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -12.47239079976597300, 10.67305241930235300 ) ) ; +#1437 = ORIENTED_EDGE ( 'NONE', *, *, #1269, .F. ) ; +#1438 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -15.66255172105539900, 8.073042939484883700 ) ) ; +#1439 = EDGE_CURVE ( 'NONE', #1144, #981, #289, .T. ) ; +#1440 = ORIENTED_EDGE ( 'NONE', *, *, #1155, .F. ) ; +#1441 = AXIS2_PLACEMENT_3D ( 'NONE', #915, #141, #1045 ) ; +#1442 = ORIENTED_EDGE ( 'NONE', *, *, #1135, .T. ) ; +#1443 = ADVANCED_FACE ( 'NONE', ( #276 ), #259, .T. ) ; +#1444 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -16.50966165281864300, 8.018177281174633500 ) ) ; +#1446 = DIRECTION ( 'NONE', ( -1.083673164319107800E-016, -0.7808688094430305000, -0.6246950475544240700 ) ) ; +#1447 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -5.650706642057635100, 13.00000000000000000 ) ) ; +#1448 = EDGE_CURVE ( 'NONE', #1113, #969, #264, .T. ) ; +#1449 = ADVANCED_FACE ( 'NONE', ( #292 ), #250, .T. ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.41252044604024700, 10.20108969111040100 ) ) ; +#1451 = AXIS2_PLACEMENT_3D ( 'NONE', #1255, #1386, #613 ) ; +#1452 = ORIENTED_EDGE ( 'NONE', *, *, #1567, .T. ) ; +#1453 = ADVANCED_FACE ( 'NONE', ( #270 ), #269, .T. ) ; +#1454 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -20.71176587879800100, 8.221972889820738900 ) ) ; +#1455 = ORIENTED_EDGE ( 'NONE', *, *, #918, .F. ) ; +#1456 = DIRECTION ( 'NONE', ( -2.168404344971006900E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1457 = ORIENTED_EDGE ( 'NONE', *, *, #1425, .F. ) ; +#1458 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.01387818865996600, 11.20627521612004800 ) ) ; +#1459 = ORIENTED_EDGE ( 'NONE', *, *, #549, .F. ) ; +#1460 = ORIENTED_EDGE ( 'NONE', *, *, #1425, .T. ) ; +#1461 = AXIS2_PLACEMENT_3D ( 'NONE', #1048, #532, #1435 ) ; +#1462 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1463 = VERTEX_POINT ( 'NONE', #1085 ) ; +#1464 = ADVANCED_FACE ( 'NONE', ( #256 ), #59, .F. ) ; +#1465 = ORIENTED_EDGE ( 'NONE', *, *, #181, .F. ) ; +#1466 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #874, #106 ) ; +#1467 = ORIENTED_EDGE ( 'NONE', *, *, #539, .F. ) ; +#1468 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1469 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 5.000000000000000000 ) ) ; +#1470 = ADVANCED_FACE ( 'NONE', ( #244 ), #1598, .T. ) ; +#1471 = CARTESIAN_POINT ( 'NONE', ( 4.949200000000000300, 10.00000000000000000, 6.000000000000000000 ) ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( 2.398400000000002300, 13.57460947032089400, -34.25000000000000000 ) ) ; +#1473 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 6.000000000000000000 ) ) ; +#1474 = EDGE_CURVE ( 'NONE', #640, #337, #231, .T. ) ; +#1475 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.80277563773198700, 9.368439310809765900 ) ) ; +#1476 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1477 = ORIENTED_EDGE ( 'NONE', *, *, #511, .F. ) ; +#1478 = ORIENTED_EDGE ( 'NONE', *, *, #1506, .F. ) ; +#1479 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -25.50000000000000400, 4.999999999999999100 ) ) ; +#1480 = VERTEX_POINT ( 'NONE', #430 ) ; +#1481 = ORIENTED_EDGE ( 'NONE', *, *, #1093, .F. ) ; +#1482 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1483 = ORIENTED_EDGE ( 'NONE', *, *, #761, .F. ) ; +#1484 = ORIENTED_EDGE ( 'NONE', *, *, #1181, .F. ) ; +#1485 = EDGE_CURVE ( 'NONE', #1215, #198, #233, .T. ) ; +#1486 = ORIENTED_EDGE ( 'NONE', *, *, #995, .T. ) ; +#1487 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1488 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000004100, 3.964466094067281800, -27.71446609406729400 ) ) ; +#1489 = DIRECTION ( 'NONE', ( 5.418365821595540400E-017, 0.7808688094430305000, 0.6246950475544240700 ) ) ; +#1490 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -13.14012574002615500, 8.428476754344176300 ) ) ; +#1491 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.99999999999999300, 9.408980334482196300 ) ) ; +#1492 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000003200, 13.57460947032089600, -34.25000000000000000 ) ) ; +#1493 = VERTEX_POINT ( 'NONE', #573 ) ; +#1494 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1495 = ORIENTED_EDGE ( 'NONE', *, *, #966, .T. ) ; +#1496 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -16.98395292476742900, 10.00298150377745200 ) ) ; +#1497 = EDGE_LOOP ( 'NONE', ( #1442, #1455, #1457, #1459 ) ) ; +#1498 = ORIENTED_EDGE ( 'NONE', *, *, #539, .T. ) ; +#1499 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000400, -14.04184262296402400, 10.29255477223613000 ) ) ; +#1500 = ORIENTED_EDGE ( 'NONE', *, *, #1254, .F. ) ; +#1501 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -1.734723475976808300E-016 ) ) ; +#1502 = ORIENTED_EDGE ( 'NONE', *, *, #74, .F. ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -21.16249870389172100, 10.32940931538612300 ) ) ; +#1504 = ORIENTED_EDGE ( 'NONE', *, *, #676, .F. ) ; +#1505 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -9.505456137804838300, 11.95865453176901000 ) ) ; +#1506 = EDGE_CURVE ( 'NONE', #1399, #1084, #253, .T. ) ; +#1507 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1508 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -12.11727336384145200, 10.78082108054457000 ) ) ; +#1509 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.734723475976808300E-016 ) ) ; +#1510 = ORIENTED_EDGE ( 'NONE', *, *, #481, .T. ) ; +#1511 = EDGE_CURVE ( 'NONE', #130, #1624, #228, .T. ) ; +#1512 = CARTESIAN_POINT ( 'NONE', ( 7.398400000000004100, 3.964466094067281800, -27.71446609406729400 ) ) ; +#1513 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000900, -18.37094500583004500, 10.00599453467091800 ) ) ; +#1514 = ORIENTED_EDGE ( 'NONE', *, *, #1369, .F. ) ; +#1515 = ORIENTED_EDGE ( 'NONE', *, *, #1610, .T. ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( 7.898400000000001400, -14.75684620364584100, 10.17758307915380700 ) ) ; +#1517 = ORIENTED_EDGE ( 'NONE', *, *, #1439, .F. ) ; +#1518 = VERTEX_POINT ( 'NONE', #1223 ) ; +#1519 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1520 = ORIENTED_EDGE ( 'NONE', *, *, #846, .T. ) ; +#1521 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1522 = VERTEX_POINT ( 'NONE', #1479 ) ; +#1523 = MECHANICAL_CONTEXT ( 'NONE', #1395, 'mechanical' ) ; +#1524 = EDGE_CURVE ( 'NONE', #979, #352, #224, .T. ) ; +#1525 = AXIS2_PLACEMENT_3D ( 'NONE', #420, #1340, #558 ) ; +#1526 = CARTESIAN_POINT ( 'NONE', ( 7.449199999999999400, 2.500000000000000000, 6.000000000000000000 ) ) ; +#1527 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#1528 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1529 = ORIENTED_EDGE ( 'NONE', *, *, #918, .T. ) ; +#1530 = EDGE_LOOP ( 'NONE', ( #1236, #1130, #1158, #1431 ) ) ; +#1531 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -24.99999999999999300, 9.408980334482196300 ) ) ; +#1532 = EDGE_CURVE ( 'NONE', #190, #1518, #226, .T. ) ; +#1533 = ORIENTED_EDGE ( 'NONE', *, *, #816, .F. ) ; +#1534 = EDGE_LOOP ( 'NONE', ( #1641, #1536, #1538, #1415 ) ) ; +#1535 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#1536 = ORIENTED_EDGE ( 'NONE', *, *, #1300, .F. ) ; +#1537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.8790852989652076000, -0.4766644911709406200 ) ) ; +#1538 = ORIENTED_EDGE ( 'NONE', *, *, #846, .F. ) ; +#1539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1540 = ORIENTED_EDGE ( 'NONE', *, *, #816, .T. ) ; +#1541 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1542 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #1087, #298 ) ; +#1543 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -12.11727336384145200, 10.78082108054457000 ) ) ; +#1544 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #851, #449, #725, #982, #192, #1107, #325, #1241, #455, #1372, #599, #1499, #729, #1628, #1173, #1513, #35, #926, #148, #1060, #271, #1186 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001090507580220440200, 0.002181015160440880300, 0.003271522740661320700, 0.004362030320881760600, 0.006543045481322645700, 0.008724060641763531700, 0.01090507580220441800, 0.01308609096264530000, 0.01526710612308618600, 0.01744812128352707000 ), + .UNSPECIFIED. ) ; +#1545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1546 = CARTESIAN_POINT ( 'NONE', ( 2.449199999999999800, 10.00000000000000000, 5.000000000000000000 ) ) ; +#1547 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 8.068481283613056700E-018, -1.000000000000000000 ) ) ; +#1548 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -6.961041562930645900, 11.53203807056100200 ) ) ; +#1549 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.296089456550043400, 12.35871291200829700 ) ) ; +#1550 = ORIENTED_EDGE ( 'NONE', *, *, #1276, .T. ) ; +#1551 = ADVANCED_FACE ( 'NONE', ( #212 ), #437, .F. ) ; +#1552 = CARTESIAN_POINT ( 'NONE', ( 9.898399999998503100, -7.976654442290954900, 13.45516551457883200 ) ) ; +#1553 = ORIENTED_EDGE ( 'NONE', *, *, #1127, .F. ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 9.898399999999998800, -15.66255172105539600, 8.073042939484880200 ) ) ; +#1555 = ORIENTED_EDGE ( 'NONE', *, *, #114, .F. ) ; +#1556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1557 = EDGE_CURVE ( 'NONE', #1304, #941, #218, .T. ) ; +#1558 = ORIENTED_EDGE ( 'NONE', *, *, #575, .F. ) ; +#1559 = CARTESIAN_POINT ( 'NONE', ( 1.854784477705111100E-013, -8.755738599199999000, 12.57119687231405600 ) ) ; +#1560 = EDGE_LOOP ( 'NONE', ( #1344, #1347, #1357, #1360, #1362, #1364 ) ) ; +#1561 = VERTEX_POINT ( 'NONE', #1488 ) ; +#1562 = ADVANCED_FACE ( 'NONE', ( #197 ), #1615, .T. ) ; +#1563 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -25.50000000000000400, 0.0000000000000000000 ) ) ; +#1564 = ORIENTED_EDGE ( 'NONE', *, *, #23, .F. ) ; +#1565 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -11.08157245251726900, 11.15941459230614500 ) ) ; +#1566 = ADVANCED_FACE ( 'NONE', ( #207 ), #180, .F. ) ; +#1567 = EDGE_CURVE ( 'NONE', #969, #1222, #193, .T. ) ; +#1568 = PLANE ( 'NONE', #769 ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.55590000434091600, 10.38721618263855700 ) ) ; +#1570 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -10.70949422079413100, 9.154272716096494700 ) ) ; +#1571 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -13.97138778022312900, 8.272114272004452900 ) ) ; +#1572 = AXIS2_PLACEMENT_3D ( 'NONE', #213, #621, #625 ) ; +#1573 = ADVANCED_FACE ( 'NONE', ( #188 ), #185, .T. ) ; +#1574 = ORIENTED_EDGE ( 'NONE', *, *, #1413, .T. ) ; +#1575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1576 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -16.59976296163652900, 10.01653210543602200 ) ) ; +#1577 = ORIENTED_EDGE ( 'NONE', *, *, #191, .F. ) ; +#1578 = VERTEX_POINT ( 'NONE', #1106 ) ; +#1579 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1580 = ADVANCED_FACE ( 'NONE', ( #186 ), #175, .T. ) ; +#1581 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -21.54510234317944400, 8.364007776242473800 ) ) ; +#1582 = ORIENTED_EDGE ( 'NONE', *, *, #1610, .F. ) ; +#1583 = ORIENTED_EDGE ( 'NONE', *, *, #523, .F. ) ; +#1584 = VERTEX_POINT ( 'NONE', #1546 ) ; +#1585 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 13.00000000000000000 ) ) ; +#1586 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1587 = ADVANCED_FACE ( 'NONE', ( #176 ), #1239, .F. ) ; +#1588 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.068481283613056700E-018, 1.000000000000000000 ) ) ; +#1589 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000002300, -6.296111700706345200, 12.35867187469665900 ) ) ; +#1591 = EDGE_CURVE ( 'NONE', #979, #981, #173, .T. ) ; +#1592 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1593 = VERTEX_POINT ( 'NONE', #716 ) ; +#1594 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1595 = ORIENTED_EDGE ( 'NONE', *, *, #1276, .F. ) ; +#1596 = ORIENTED_EDGE ( 'NONE', *, *, #1086, .F. ) ; +#1597 = VERTEX_POINT ( 'NONE', #1491 ) ; +#1598 = PLANE ( 'NONE', #933 ) ; +#1599 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 3.469446951953611000E-015, -1.000000000000000000 ) ) ; +#1600 = EDGE_CURVE ( 'NONE', #927, #903, #210, .T. ) ; +#1601 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.068481283613056700E-018, 1.000000000000000000 ) ) ; +#1602 = ORIENTED_EDGE ( 'NONE', *, *, #1448, .T. ) ; +#1603 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.3944487245360096500, -0.9189179526551405400 ) ) ; +#1604 = ORIENTED_EDGE ( 'NONE', *, *, #1189, .F. ) ; +#1605 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #128, #756, ( #875 ) ) ; +#1606 = ADVANCED_FACE ( 'NONE', ( #171 ), #474, .T. ) ; +#1607 = ORIENTED_EDGE ( 'NONE', *, *, #1413, .F. ) ; +#1608 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.090249291540239100, 12.73833224558546600 ) ) ; +#1609 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, -24.99999999999999300, 8.908980334482196300 ) ) ; +#1610 = EDGE_CURVE ( 'NONE', #1593, #1561, #172, .T. ) ; +#1611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1612 = EDGE_LOOP ( 'NONE', ( #1125, #1132, #1137, #1139, #1145, #1149, #1159, #1168, #1172, #1174 ) ) ; +#1613 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1614 = ORIENTED_EDGE ( 'NONE', *, *, #139, .F. ) ; +#1615 = PLANE ( 'NONE', #1162 ) ; +#1616 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1617 = ORIENTED_EDGE ( 'NONE', *, *, #956, .F. ) ; +#1618 = ORIENTED_EDGE ( 'NONE', *, *, #1348, .F. ) ; +#1619 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -14.30216336997164500, 10.24628493148400400 ) ) ; +#1620 = ORIENTED_EDGE ( 'NONE', *, *, #1103, .T. ) ; +#1621 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 8.068481283613056700E-018, -1.000000000000000000 ) ) ; +#1622 = EDGE_LOOP ( 'NONE', ( #1204, #1056, #1437, #883, #1252 ) ) ; +#1623 = EDGE_CURVE ( 'NONE', #1133, #1124, #194, .T. ) ; +#1624 = VERTEX_POINT ( 'NONE', #868 ) ; +#1625 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1626 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -16.93233976002446200, 8.003279708812137000 ) ) ; +#1627 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #133, #967 ) ; +#1628 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000900, -16.20653739809169000, 10.02821291984030500 ) ) ; +#1629 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000000, -38.75000000000000000 ) ) ; +#1630 = AXIS2_PLACEMENT_3D ( 'NONE', #562, #699, #1343 ) ; +#1631 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -22.63442504634681600, 10.68985947019709200 ) ) ; +#1632 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, -8.412502425547025100, 10.27080130347495100 ) ) ; +#1633 = AXIS2_PLACEMENT_3D ( 'NONE', #426, #1588, #819 ) ; +#1634 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000000000, 2.500000000000000400, -38.75000000000000000 ) ) ; +#1635 = APPROVAL ( #112, 'UNSPECIFIED' ) ; +#1636 = ORIENTED_EDGE ( 'NONE', *, *, #873, .F. ) ; +#1637 = ORIENTED_EDGE ( 'NONE', *, *, #170, .F. ) ; +#1638 = CARTESIAN_POINT ( 'NONE', ( 7.898399999999999600, -12.47239079976597300, 10.67305241930235300 ) ) ; +#1639 = CARTESIAN_POINT ( 'NONE', ( 9.898400000000000500, 0.5000000000000000000, 12.49999999999999800 ) ) ; +#1640 = ORIENTED_EDGE ( 'NONE', *, *, #1567, .F. ) ; +#1641 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ; +#1642 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1643 = EDGE_LOOP ( 'NONE', ( #1409, #1411, #1418, #1420 ) ) ; +#1644 = VERTEX_POINT ( 'NONE', #1131 ) ; +#1645 = ORIENTED_EDGE ( 'NONE', *, *, #1448, .F. ) ; +#1646 = EDGE_CURVE ( 'NONE', #1381, #614, #159, .T. ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Guard.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Guard.step new file mode 100644 index 0000000..8eea1bb --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Guard.step @@ -0,0 +1,5836 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger_Guard.STEP', + '2013-11-14T05:08:41', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = EDGE_CURVE ( 'NONE', #3233, #1092, #3001, .T. ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000005600, 9.099997531949975700, -3.799983233560531000 ) ) ; +#3 = EDGE_CURVE ( 'NONE', #2818, #807, #4163, .T. ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( -0.006293132594062562900, 2.750779753055784900, -13.86459716126755400 ) ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( 13.10160000000000100, 24.99999753194998300, 68.99053987906626200 ) ) ; +#6 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#7 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( 3.407927885712591600, 7.040985460209111800, -9.999983227435722100 ) ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( 12.47332433909775200, 8.261953825395266900, -9.263436106330230400 ) ) ; +#10 = EDGE_CURVE ( 'NONE', #4593, #3521, #3344, .T. ) ; +#11 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1643, #3402, #4462 ), + ( #2343, #8, #2699 ), + ( #415, #3043, #837 ), + ( #3420, #1247, #3758 ), + ( #1664, #4119, #2017 ), + ( #4475, #2365, #25 ), + ( #2715, #436, #3064 ), + ( #853, #3438, #1269 ), + ( #3778, #1680, #4141 ), + ( #2035, #4490, #2382 ), + ( #44, #2732, #454 ), + ( #3083, #877, #3451 ), + ( #1293, #3800, #1701 ), + ( #4155, #2057, #4508 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( -4.336808689942017700E-019, 0.0004041214002380510000, 0.0008082428004761024300, 0.001616485600952205300, 0.002020607001190256900, 0.002424728401428308300, 0.003232971201904411000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8739442499921849000, 1.000000000000000000), + ( 1.000000000000000000, 0.8739403744477377600, 1.000000000000000000), + ( 1.000000000000000000, 0.8722249084723947600, 1.000000000000000000), + ( 1.000000000000000000, 0.8656628765850975500, 1.000000000000000000), + ( 1.000000000000000000, 0.8607349519387873500, 1.000000000000000000), + ( 1.000000000000000000, 0.8424158593059381000, 1.000000000000000000), + ( 1.000000000000000000, 0.8251359227275152400, 1.000000000000000000), + ( 1.000000000000000000, 0.7970637702023377600, 1.000000000000000000), + ( 1.000000000000000000, 0.7872044335092802700, 1.000000000000000000), + ( 1.000000000000000000, 0.7678895669909469000, 1.000000000000000000), + ( 1.000000000000000000, 0.7584204831174593500, 1.000000000000000000), + ( 1.000000000000000000, 0.7316303526548030300, 1.000000000000000000), + ( 1.000000000000000000, 0.7161048234847631200, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865477900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#12 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#13 = AXIS2_PLACEMENT_3D ( 'NONE', #1966, #4751, #2660 ) ; +#14 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 12.49999753194997600, -8.999983233560547200 ) ) ; +#15 = CARTESIAN_POINT ( 'NONE', ( 12.31000278554974500, -11.63176217742977400, -3.277205641478954800 ) ) ; +#16 = EDGE_CURVE ( 'NONE', #3974, #4593, #3046, .T. ) ; +#17 = ADVANCED_FACE ( 'NONE', ( #2957 ), #3921, .T. ) ; +#18 = CARTESIAN_POINT ( 'NONE', ( 14.40474716521648300, 4.399954062412723100, -12.49735130408040200 ) ) ; +#19 = CIRCLE ( 'NONE', #2187, 32.50000000000000000 ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( 14.67762884994001000, -12.73908471968327700, 9.154764508545479600 ) ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( -6.505213034913026600E-016, 2.326349354283046500, -12.93285301449088500 ) ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -9.103423084242667300, 16.84534624179750000 ) ) ; +#23 = CYLINDRICAL_SURFACE ( 'NONE', #2173, 0.9999999999999991100 ) ; +#24 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#25 = CARTESIAN_POINT ( 'NONE', ( 2.473292805467575600, 6.877462654135133100, -10.25284457627140700 ) ) ; +#26 = EDGE_LOOP ( 'NONE', ( #1077, #3013, #106, #3723 ) ) ; +#27 = CARTESIAN_POINT ( 'NONE', ( 12.41978106575545300, 7.248959039815454200, -9.469819443007619200 ) ) ; +#28 = LINE ( 'NONE', #2105, #40 ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 13.20413797358622800, -10.57135652397142800, -10.48726299829639400 ) ) ; +#30 = EDGE_CURVE ( 'NONE', #1878, #1417, #2952, .T. ) ; +#31 = VERTEX_POINT ( 'NONE', #1907 ) ; +#32 = VECTOR ( 'NONE', #2766, 1000.000000000000000 ) ; +#33 = EDGE_CURVE ( 'NONE', #2253, #2972, #2967, .T. ) ; +#34 = CARTESIAN_POINT ( 'NONE', ( 17.18724181686037200, 6.676012049735128100, -11.20995042819548900 ) ) ; +#35 = VERTEX_POINT ( 'NONE', #4252 ) ; +#36 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9393844695325593900, -0.3428655981591505200 ) ) ; +#37 = AXIS2_PLACEMENT_3D ( 'NONE', #1983, #4434, #2326 ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999997800, 7.499997531949971700, -7.834640608427718300 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999998400, 7.404783783242378600, -8.805759462705077900 ) ) ; +#40 = VECTOR ( 'NONE', #4554, 999.9999999999998900 ) ; +#41 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#42 = VERTEX_POINT ( 'NONE', #4011 ) ; +#43 = EDGE_CURVE ( 'NONE', #499, #3405, #2946, .T. ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 2.601132248565146000, 8.139887093209921400, -9.442915784926205100 ) ) ; +#45 = FACE_OUTER_BOUND ( 'NONE', #378, .T. ) ; +#46 = ADVANCED_FACE ( 'NONE', ( #2942 ), #3435, .T. ) ; +#47 = CARTESIAN_POINT ( 'NONE', ( 12.40553912314566500, 6.852592070770760400, -10.29581386336927200 ) ) ; +#48 = AXIS2_PLACEMENT_3D ( 'NONE', #4724, #2296, #2283 ) ; +#49 = ORIENTED_EDGE ( 'NONE', *, *, #4191, .F. ) ; +#50 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#51 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.499997531949971700, -7.834640608427718300 ) ) ; +#52 = EDGE_CURVE ( 'NONE', #3411, #4161, #2910, .T. ) ; +#53 = CARTESIAN_POINT ( 'NONE', ( 13.89646261111674100, -11.15069699512181200, 9.657847288161615800 ) ) ; +#54 = ORIENTED_EDGE ( 'NONE', *, *, #43, .F. ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949972500, -7.834640608427712900 ) ) ; +#56 = ORIENTED_EDGE ( 'NONE', *, *, #967, .F. ) ; +#57 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669298600, 0.9848077530122082400 ) ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( 40.19174207655505900, 12.49999753194997300, 15.00001676643945100 ) ) ; +#59 = CIRCLE ( 'NONE', #1829, 3.750000000000000000 ) ; +#60 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#61 = EDGE_CURVE ( 'NONE', #2458, #491, #2917, .T. ) ; +#62 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949972100, -15.44080068533170500 ) ) ; +#63 = CARTESIAN_POINT ( 'NONE', ( 1.730278102999083500, -10.48186707534378400, -10.77203695102143000 ) ) ; +#64 = EDGE_CURVE ( 'NONE', #634, #1329, #2898, .T. ) ; +#65 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #172, #2480, #590 ), + ( #3204, #1008, #3561 ), + ( #1426, #3925, #1819 ), + ( #4269, #2171, #4617 ), + ( #2510, #190, #2866 ), + ( #609, #3219, #1030 ), + ( #3582, #1443, #3941 ), + ( #1838, #4287, #2179 ), + ( #4632, #2528, #212 ), + ( #2880, #633, #3234 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001005642694766758000, 0.002011285389533515900, 0.003016928084300273700, 0.004022570779067031900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.6929884209377599200, 1.000000000000000000), + ( 1.000000000000000000, 0.6761622112513053800, 1.000000000000000000), + ( 1.000000000000000000, 0.6387651301860367600, 1.000000000000000000), + ( 1.000000000000000000, 0.6179565793183181600, 1.000000000000000000), + ( 1.000000000000000000, 0.5755024359582094900, 1.000000000000000000), + ( 1.000000000000000000, 0.5538970729180784400, 1.000000000000000000), + ( 1.000000000000000000, 0.5122373856338150500, 1.000000000000000000), + ( 1.000000000000000000, 0.4921765321442008700, 1.000000000000000000), + ( 1.000000000000000000, 0.4745880129960275400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#66 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949971700, -7.834640608427718300 ) ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( 12.03246721456950200, 7.773563867732241800, -9.848781066689383600 ) ) ; +#68 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 2.517487109938807000, -11.63176217742977400, -1.478651685726328100 ) ) ; +#70 = EDGE_CURVE ( 'NONE', #1946, #4328, #4361, .T. ) ; +#71 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#72 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( 2.398399999999998300, 24.99999753194998300, 68.99053987906626200 ) ) ; +#74 = CIRCLE ( 'NONE', #2302, 4.999999999999999100 ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -4.669957029759402200, -15.18191720718618700 ) ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 2.398399999999998300, 24.99999753194998300, 68.99053987906626200 ) ) ; +#77 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4414, #1593, #4740, #2655 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976807100E-018, 0.001159376517534458800 ), + .UNSPECIFIED. ) ; +#78 = CIRCLE ( 'NONE', #3366, 1.000000000000000900 ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 20.00001676643945100 ) ) ; +#80 = FACE_OUTER_BOUND ( 'NONE', #3611, .T. ) ; +#81 = EDGE_CURVE ( 'NONE', #2344, #4758, #2896, .T. ) ; +#82 = FACE_OUTER_BOUND ( 'NONE', #4403, .T. ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( 0.9613234723818077100, 3.154487910997105800, 12.46778632675756700 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 2.398399999999998300, 24.99999753194998300, 67.50001676643944400 ) ) ; +#85 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 9.999997531949972500, -14.99998323356054400 ) ) ; +#86 = CYLINDRICAL_SURFACE ( 'NONE', #2274, 5.000000000000000900 ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( -0.03104491432333134400, 3.080560995830300600, -13.79738671111938000 ) ) ; +#88 = CARTESIAN_POINT ( 'NONE', ( 13.87606204706890400, -9.409551102116475700, -12.65005206097727400 ) ) ; +#89 = ORIENTED_EDGE ( 'NONE', *, *, #839, .T. ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 0.1293091550403415700, -12.28223372300900000, 10.04451367571454600 ) ) ; +#91 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#92 = FACE_OUTER_BOUND ( 'NONE', #2733, .T. ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( -0.03712774655014441200, -10.23907204358427400, -11.44471169618884900 ) ) ; +#94 = ORIENTED_EDGE ( 'NONE', *, *, #3386, .F. ) ; +#95 = ADVANCED_FACE ( 'NONE', ( #2854 ), #3824, .T. ) ; +#96 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#97 = ORIENTED_EDGE ( 'NONE', *, *, #2385, .F. ) ; +#98 = FACE_OUTER_BOUND ( 'NONE', #1205, .T. ) ; +#99 = AXIS2_PLACEMENT_3D ( 'NONE', #3322, #1136, #3667 ) ; +#100 = VERTEX_POINT ( 'NONE', #2502 ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( -1.024461871448910000, 5.549946490428187200, 12.27066252070106100 ) ) ; +#102 = ORIENTED_EDGE ( 'NONE', *, *, #43, .T. ) ; +#103 = EDGE_CURVE ( 'NONE', #2344, #2627, #2843, .T. ) ; +#104 = FACE_OUTER_BOUND ( 'NONE', #3069, .T. ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 12.49999753194997600, -14.99998323356054400 ) ) ; +#106 = ORIENTED_EDGE ( 'NONE', *, *, #1380, .F. ) ; +#107 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#108 = VERTEX_POINT ( 'NONE', #458 ) ; +#109 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 19.98722159839779500, 70.00001676643945800 ) ) ; +#110 = EDGE_CURVE ( 'NONE', #3016, #2679, #2839, .T. ) ; +#111 = ORIENTED_EDGE ( 'NONE', *, *, #3955, .T. ) ; +#112 = CARTESIAN_POINT ( 'NONE', ( 0.03615952415838274300, -9.803317065438452700, -13.79525181674231500 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 14.08715237125114300, -12.01189854471799000, -11.07183020340313100 ) ) ; +#114 = FACE_OUTER_BOUND ( 'NONE', #4028, .T. ) ; +#115 = AXIS2_PLACEMENT_3D ( 'NONE', #3708, #1609, #4074 ) ; +#116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#117 = ORIENTED_EDGE ( 'NONE', *, *, #2293, .T. ) ; +#118 = EDGE_CURVE ( 'NONE', #2362, #1133, #2848, .T. ) ; +#119 = CARTESIAN_POINT ( 'NONE', ( -3.544581482436580900, 7.335471568567480300, 8.955435284004225900 ) ) ; +#120 = VERTEX_POINT ( 'NONE', #2876 ) ; +#121 = ADVANCED_FACE ( 'NONE', ( #2802 ), #2789, .F. ) ; +#122 = LINE ( 'NONE', #3821, #2648 ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( 14.67877907927382900, -10.90696984451242800, -15.09524526266732300 ) ) ; +#124 = DIRECTION ( 'NONE', ( -0.09547781514618917900, 0.0000000000000000000, -0.9954315580766516200 ) ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( 2.172893425170017600, -13.44997159081953700, -3.917221744247291900 ) ) ; +#126 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #3657 ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( 13.83458235174382100, -12.34049684824548800, -10.17982295743313700 ) ) ; +#128 = EDGE_CURVE ( 'NONE', #541, #4571, #2808, .T. ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 13.36823782257022600, -3.277205641478951700 ) ) ; +#130 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -5.711846095760980000, -9.273070689112936200 ) ) ; +#131 = EDGE_CURVE ( 'NONE', #2627, #3801, #1026, .T. ) ; +#132 = AXIS2_PLACEMENT_3D ( 'NONE', #4656, #3275, #1499 ) ; +#133 = FACE_OUTER_BOUND ( 'NONE', #423, .T. ) ; +#134 = EDGE_CURVE ( 'NONE', #3801, #3307, #2796, .T. ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 12.60159999800768700, 24.62240701706311400, 70.15629357986797700 ) ) ; +#136 = CYLINDRICAL_SURFACE ( 'NONE', #4750, 1.200000000000005700 ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( 13.06766588139503700, -11.69874991408232700, -10.17982295743314400 ) ) ; +#138 = VECTOR ( 'NONE', #148, 1000.000000000000000 ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 2.681061067912518900, -11.47483768413977700, -6.087959567885878400 ) ) ; +#140 = CARTESIAN_POINT ( 'NONE', ( -0.07908012879673397000, -10.85326599177282800, -9.483526948552265500 ) ) ; +#141 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#142 = EDGE_CURVE ( 'NONE', #3307, #1211, #315, .T. ) ; +#143 = SPHERICAL_SURFACE ( 'NONE', #2327, 5.000000000000000000 ) ; +#144 = ORIENTED_EDGE ( 'NONE', *, *, #4447, .F. ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 2.499997531949972100, -14.99998323356054700 ) ) ; +#146 = CIRCLE ( 'NONE', #2420, 1.000000000000000900 ) ; +#147 = VERTEX_POINT ( 'NONE', #3648 ) ; +#148 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( 12.69501556036659200, 22.21797643011834500, 69.52513834723272600 ) ) ; +#150 = CARTESIAN_POINT ( 'NONE', ( 9.776849471579547300, 20.43466303776799400, 69.50001676643945800 ) ) ; +#151 = LINE ( 'NONE', #79, #32 ) ; +#152 = ORIENTED_EDGE ( 'NONE', *, *, #549, .T. ) ; +#153 = AXIS2_PLACEMENT_3D ( 'NONE', #577, #3191, #1334 ) ; +#154 = ORIENTED_EDGE ( 'NONE', *, *, #3706, .F. ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( -0.1127280961054527700, -11.12749920526110100, -8.325505483706592700 ) ) ; +#156 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -6.631762177429775000, 12.50001676643945100 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 4.397918137561992700, 20.94988510403725400, 69.40784625110310900 ) ) ; +#158 = EDGE_CURVE ( 'NONE', #1211, #3520, #2783, .T. ) ; +#159 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#160 = ORIENTED_EDGE ( 'NONE', *, *, #1301, .F. ) ; +#161 = EDGE_LOOP ( 'NONE', ( #2369, #2481, #2536, #2619 ) ) ; +#162 = FACE_OUTER_BOUND ( 'NONE', #221, .T. ) ; +#163 = CIRCLE ( 'NONE', #2456, 5.000000000000000000 ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( 15.13994522238635400, -11.63494447176219100, 7.817090704193691200 ) ) ; +#165 = ORIENTED_EDGE ( 'NONE', *, *, #3490, .T. ) ; +#166 = EDGE_CURVE ( 'NONE', #3416, #2322, #2752, .T. ) ; +#167 = ADVANCED_FACE ( 'NONE', ( #2781 ), #2746, .T. ) ; +#168 = CYLINDRICAL_SURFACE ( 'NONE', #868, 2.499999999999998700 ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( 3.993208718695496100, 20.55293979002667400, 69.89760508273241200 ) ) ; +#170 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#171 = CARTESIAN_POINT ( 'NONE', ( 10.91143748855560400, 21.18682827386355400, 69.33801965825347200 ) ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -8.561776163818310100, -13.38134266248358100 ) ) ; +#173 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ; +#174 = CARTESIAN_POINT ( 'NONE', ( 12.85781163576261900, -13.23629581176163400, -12.09168439743227300 ) ) ; +#175 = EDGE_CURVE ( 'NONE', #35, #3520, #2739, .T. ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 2.499997531949969000, 15.00001676643945100 ) ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 3.729743466629758400, 21.54276525467912200, 70.00364228511912800 ) ) ; +#178 = ORIENTED_EDGE ( 'NONE', *, *, #3243, .F. ) ; +#179 = CARTESIAN_POINT ( 'NONE', ( -4.289268905042057200, 7.499997531949973400, -8.426916520892231000 ) ) ; +#180 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#181 = AXIS2_PLACEMENT_3D ( 'NONE', #2559, #3613, #671 ) ; +#182 = CYLINDRICAL_SURFACE ( 'NONE', #1669, 2.500000000000000400 ) ; +#183 = ADVANCED_FACE ( 'NONE', ( #2735 ), #2686, .T. ) ; +#184 = EDGE_CURVE ( 'NONE', #4328, #2154, #530, .T. ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( 14.87063185188193900, -12.28245180121866800, 10.04418369281987500 ) ) ; +#186 = DIRECTION ( 'NONE', ( -1.258607117591476000E-016, 0.9848077530122083500, 0.1736481776669294700 ) ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -10.55229541076278600, 10.60314730934792000 ) ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999996400, 9.999997531949969000, 15.00001676643945500 ) ) ; +#189 = CARTESIAN_POINT ( 'NONE', ( 3.261249007131585800, 21.03581696149160200, 69.74003554476762200 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 15.05564115352594400, -9.758213502114173800, -12.23674785406738900 ) ) ; +#191 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4, #831, #3415 ), + ( #1242, #3755, #1659 ), + ( #4113, #2012, #4470 ), + ( #2357, #21, #2711 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 1.520618829230439000, 1.570796326794896600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7101794051988757900, 1.000000000000000000), + ( 1.000000000000000000, 0.7091582711149635500, 1.000000000000000000), + ( 1.000000000000000000, 0.7081336457189575400, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#192 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 2.326349354283042900, -12.93285301449088300 ) ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 1.828948954194769400, 23.21817027576483400, 69.41653999812463400 ) ) ; +#194 = CIRCLE ( 'NONE', #4313, 2.500000000000000400 ) ; +#195 = EDGE_CURVE ( 'NONE', #1341, #3184, #2135, .T. ) ; +#196 = ADVANCED_FACE ( 'NONE', ( #2719 ), #2670, .F. ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( -1.306736521645379500, 5.883410208786717300, -12.26655678245284900 ) ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( -0.1662580659988819000, -11.63176217742977400, 5.354244485032976000 ) ) ; +#199 = DIRECTION ( 'NONE', ( -0.9953074291977234100, 0.0000000000000000000, 0.09676322330213518700 ) ) ; +#200 = LINE ( 'NONE', #1816, #138 ) ; +#201 = EDGE_CURVE ( 'NONE', #3432, #2644, #2675, .T. ) ; +#202 = FACE_OUTER_BOUND ( 'NONE', #1128, .T. ) ; +#203 = CARTESIAN_POINT ( 'NONE', ( -22.84295374164850400, 12.49999753194997300, 15.00001676643945300 ) ) ; +#204 = VECTOR ( 'NONE', #2804, 1000.000000000000000 ) ; +#205 = ADVANCED_FACE ( 'NONE', ( #2689 ), #1032, .T. ) ; +#206 = AXIS2_PLACEMENT_3D ( 'NONE', #4335, #2229, #4671 ) ; +#207 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 12.49999753194997600, -9.999983233560547200 ) ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 0.1101389240832069000, -12.27123822178491300, 10.12216627153798300 ) ) ; +#209 = FACE_OUTER_BOUND ( 'NONE', #809, .T. ) ; +#210 = EDGE_CURVE ( 'NONE', #3580, #3917, #2666, .T. ) ; +#211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#212 = CARTESIAN_POINT ( 'NONE', ( 14.17493419442270400, -11.88732885739233900, -11.38895541497505400 ) ) ; +#213 = CARTESIAN_POINT ( 'NONE', ( 15.03102220184093500, 3.080410212718122300, -13.79741396621859200 ) ) ; +#214 = AXIS2_PLACEMENT_3D ( 'NONE', #1864, #4322, #2220 ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( 2.133416087193773500, 7.715991963136193700, -7.741929719614930100 ) ) ; +#216 = CIRCLE ( 'NONE', #2484, 6.000000000000000000 ) ; +#217 = CARTESIAN_POINT ( 'NONE', ( 1.885194106591723300, -13.41184642851905900, -1.546685712946227000 ) ) ; +#218 = ORIENTED_EDGE ( 'NONE', *, *, #861, .T. ) ; +#219 = EDGE_CURVE ( 'NONE', #2154, #2517, #1561, .T. ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 1.516087306876297700, 7.352124151515182500, -9.047572511546603000 ) ) ; +#221 = EDGE_LOOP ( 'NONE', ( #4691, #4112, #3557, #4708 ) ) ; +#222 = CARTESIAN_POINT ( 'NONE', ( -25.04388966203675800, 12.49999753194997100, 16.66366225121652200 ) ) ; +#223 = VERTEX_POINT ( 'NONE', #636 ) ; +#224 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#225 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000000, 2.426714878844895600, -12.91515586457767200 ) ) ; +#226 = CIRCLE ( 'NONE', #2540, 5.000000000000000000 ) ; +#227 = ADVANCED_FACE ( 'NONE', ( #2630 ), #2082, .T. ) ; +#228 = ORIENTED_EDGE ( 'NONE', *, *, #581, .T. ) ; +#229 = EDGE_LOOP ( 'NONE', ( #1528, #1547, #1577, #1588, #1606, #1635, #1640 ) ) ; +#230 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122083500, -0.1736481776669296400 ) ) ; +#231 = FACE_OUTER_BOUND ( 'NONE', #3051, .T. ) ; +#232 = EDGE_CURVE ( 'NONE', #3746, #4758, #2681, .T. ) ; +#233 = ADVANCED_FACE ( 'NONE', ( #2640 ), #2199, .F. ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 12.49184751438094300, -11.63176217742977200, -1.479602368421187200 ) ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 0.0000000000000000000, 70.00001676643945800 ) ) ; +#236 = VERTEX_POINT ( 'NONE', #782 ) ; +#237 = EDGE_CURVE ( 'NONE', #2644, #251, #2724, .T. ) ; +#238 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#239 = DATE_AND_TIME ( #2531, #2056 ) ; +#240 = ORIENTED_EDGE ( 'NONE', *, *, #4770, .F. ) ; +#241 = AXIS2_PLACEMENT_3D ( 'NONE', #4311, #2201, #4642 ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( 16.88861695807201400, 7.499997531949972500, -10.42745981003436700 ) ) ; +#243 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 9.099997531949975700, -4.999983233560542800 ) ) ; +#244 = ADVANCED_FACE ( 'NONE', ( #2625 ), #2583, .T. ) ; +#245 = TOROIDAL_SURFACE ( 'NONE', #1605, 6.000000000000000000, 1.000000000000000000 ) ; +#246 = CARTESIAN_POINT ( 'NONE', ( 3.747396704975616700, -13.98256633766702900, -11.43783724379676800 ) ) ; +#247 = EDGE_CURVE ( 'NONE', #2517, #4417, #2996, .T. ) ; +#248 = CARTESIAN_POINT ( 'NONE', ( 15.27322868314257700, -11.40093297304334100, -6.730426318076466100 ) ) ; +#249 = ORIENTED_EDGE ( 'NONE', *, *, #4191, .T. ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.17394646130280100, 20.00001676643944700 ) ) ; +#251 = VERTEX_POINT ( 'NONE', #4454 ) ; +#252 = EDGE_CURVE ( 'NONE', #2577, #4122, #2621, .T. ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( 15.16625811013468600, -11.63176217741961500, 5.354260370861519300 ) ) ; +#254 = ADVANCED_FACE ( 'NONE', ( #2612 ), #191, .T. ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( 0.4141366974333967600, -12.88523268961538200, 8.754659940760428000 ) ) ; +#256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, -16.84376276178052500 ) ) ; +#258 = ADVANCED_FACE ( 'NONE', ( #2557 ), #2529, .T. ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 12.81729004343610300, -13.37588588835578700, -5.389540926617131700 ) ) ; +#260 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( 10.60208186243800700, 20.94988510403725400, 69.40784625110310900 ) ) ; +#262 = EDGE_CURVE ( 'NONE', #1458, #3131, #2609, .T. ) ; +#263 = ADVANCED_FACE ( 'NONE', ( #2562 ), #2376, .F. ) ; +#264 = EDGE_CURVE ( 'NONE', #2850, #2210, #2606, .T. ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( 10.69342564003182100, 20.33692670505149300, 69.96202327697797300 ) ) ; +#266 = VECTOR ( 'NONE', #485, 1000.000000000000000 ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( 1.791625674340192800, -12.96664603309567800, -12.54328693733198300 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 2.499997531949968500, 12.50001676643944700 ) ) ; +#269 = MANIFOLD_SOLID_BREP ( 'Fillet23', #2628 ) ; +#270 = EDGE_CURVE ( 'NONE', #3177, #2432, #2524, .T. ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 9.999997531949972500, -14.99998323356054400 ) ) ; +#272 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#273 = LINE ( 'NONE', #2771, #266 ) ; +#274 = EDGE_CURVE ( 'NONE', #4122, #3476, #2514, .T. ) ; +#275 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#276 = CYLINDRICAL_SURFACE ( 'NONE', #2546, 5.000000000000000000 ) ; +#277 = CARTESIAN_POINT ( 'NONE', ( 12.31000278554969500, -11.63176217742977600, -3.277205641478954300 ) ) ; +#278 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#279 = ADVANCED_FACE ( 'NONE', ( #2565 ), #866, .T. ) ; +#280 = ORIENTED_EDGE ( 'NONE', *, *, #2992, .T. ) ; +#281 = EDGE_CURVE ( 'NONE', #3476, #1480, #2475, .T. ) ; +#282 = CIRCLE ( 'NONE', #2563, 5.000000000000004400 ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( -0.4233631808746832200, -11.63176217742977200, -3.575826722854608800 ) ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, -23.22409174754586300, 15.00001676643945300 ) ) ; +#285 = ORIENTED_EDGE ( 'NONE', *, *, #4240, .T. ) ; +#286 = ADVANCED_FACE ( 'NONE', ( #2503 ), #2453, .F. ) ; +#287 = CARTESIAN_POINT ( 'NONE', ( 1.730278102999083200, -10.48186707534378600, -10.77203695102143200 ) ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 15.15991675628583700, 3.796410373064237600, 13.30811665889644300 ) ) ; +#289 = LINE ( 'NONE', #522, #204 ) ; +#290 = CARTESIAN_POINT ( 'NONE', ( 1.869314387971831000, 24.99999753195027800, 69.62872473842452300 ) ) ; +#291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#292 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ; +#293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#294 = EDGE_CURVE ( 'NONE', #1480, #2577, #2457, .T. ) ; +#295 = EDGE_LOOP ( 'NONE', ( #4509, #2791, #1877, #1204 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 13.42305836902015200, 7.288447371467115400, -9.278632279066471300 ) ) ; +#297 = EDGE_CURVE ( 'NONE', #1133, #2253, #4529, .T. ) ; +#298 = CIRCLE ( 'NONE', #2504, 5.000000000000000000 ) ; +#299 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#300 = ORIENTED_EDGE ( 'NONE', *, *, #4094, .F. ) ; +#301 = ORIENTED_EDGE ( 'NONE', *, *, #4689, .T. ) ; +#302 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( 1.025437580039241900, -10.88359810128462400, 10.14559316251826200 ) ) ; +#304 = CYLINDRICAL_SURFACE ( 'NONE', #1084, 5.000000000000000000 ) ; +#305 = CIRCLE ( 'NONE', #2568, 5.000000000000000000 ) ; +#306 = VERTEX_POINT ( 'NONE', #3145 ) ; +#307 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#308 = EDGE_CURVE ( 'NONE', #4758, #4328, #2470, .T. ) ; +#309 = CYLINDRICAL_SURFACE ( 'NONE', #937, 3.189999999999994200 ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -6.622779069733811100, 15.00001676643945100 ) ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 15.47967913010323700, 5.804131285567930100, 11.26695082468696200 ) ) ; +#312 = ORIENTED_EDGE ( 'NONE', *, *, #4476, .T. ) ; +#313 = EDGE_CURVE ( 'NONE', #419, #1716, #2460, .T. ) ; +#314 = ADVANCED_FACE ( 'NONE', ( #2409 ), #2397, .F. ) ; +#315 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #644, #3228, #1039, #3590, #1457, #3948, #1849, #4299, #2188, #4635, #2537, #220, #2888, #645 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0003700965301744589600, 0.0007401930603489179100, 0.001480386120697835200, 0.002220579181046752100, 0.002590675711221212700, 0.002960772241395673800 ), + .UNSPECIFIED. ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 1.869295232100756800, 24.63997360066768400, 69.62871356780169700 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( 14.03725387567970100, 3.039514420864493100, -12.80977854573765000 ) ) ; +#318 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #4304, #4004, ( #3657 ) ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 12.70853216473668600, 22.24094548780649900, 69.52207319990937200 ) ) ; +#320 = VERTEX_POINT ( 'NONE', #3157 ) ; +#321 = ADVANCED_FACE ( 'NONE', ( #2393 ), #2367, .F. ) ; +#322 = FACE_OUTER_BOUND ( 'NONE', #26, .T. ) ; +#323 = EDGE_CURVE ( 'NONE', #3628, #1707, #2403, .T. ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( 13.29968620794493200, 7.510954741547982000, -7.958524291603867900 ) ) ; +#325 = EDGE_CURVE ( 'NONE', #3476, #2106, #2423, .T. ) ; +#326 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000200, -9.186988295993375100, 17.16537539628912900 ) ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( 19.27990498836697600, 7.499997531949487600, 8.220111778071995400 ) ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 23.51760405021330100, 65.50821708524503600 ) ) ; +#329 = DIRECTION ( 'NONE', ( -2.775557561562889000E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#330 = FACE_OUTER_BOUND ( 'NONE', #3165, .T. ) ; +#331 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999800, 23.05800073673290000, 68.23610651842801600 ) ) ; +#332 = CIRCLE ( 'NONE', #2629, 4.999999999999998200 ) ; +#333 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4026, #714, #3318, #1918, #4374, #2266, #4704, #2610, #324, #2965 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0003943385958989170600, 0.0007886771917978341200, 0.001183015787696752800, 0.001577354383595671700 ), + .UNSPECIFIED. ) ; +#334 = ADVANCED_FACE ( 'NONE', ( #2400 ), #1777, .F. ) ; +#335 = PLANE ( 'NONE', #1360 ) ; +#336 = CIRCLE ( 'NONE', #2601, 5.000000000000004400 ) ; +#337 = EDGE_CURVE ( 'NONE', #3713, #1480, #2350, .T. ) ; +#338 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#339 = ADVANCED_FACE ( 'NONE', ( #2360 ), #2347, .T. ) ; +#340 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 67.50001676643944400 ) ) ; +#341 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 24.24528516693045800, 65.66763998172200400 ) ) ; +#342 = FACE_OUTER_BOUND ( 'NONE', #229, .T. ) ; +#343 = CARTESIAN_POINT ( 'NONE', ( -2.718383842291306400E-016, 21.34503280140469500, 68.64811989395070700 ) ) ; +#344 = DIRECTION ( 'NONE', ( 0.04939632868927702100, 0.9836055551011490000, 0.1734361977390583600 ) ) ; +#345 = CARTESIAN_POINT ( 'NONE', ( 0.07968957772367416000, 5.177450703498802700, -12.06771525653085300 ) ) ; +#346 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#347 = FACE_BOUND ( 'NONE', #3403, .T. ) ; +#348 = EDGE_CURVE ( 'NONE', #2787, #1005, #2341, .T. ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 22.41532046723410300, 65.22833310671515500 ) ) ; +#350 = ORIENTED_EDGE ( 'NONE', *, *, #1002, .F. ) ; +#351 = FACE_BOUND ( 'NONE', #2419, .T. ) ; +#352 = CARTESIAN_POINT ( 'NONE', ( 14.99709980131702700, 2.410360859258605900, -12.91803951947407600 ) ) ; +#353 = CARTESIAN_POINT ( 'NONE', ( 10.91092407309301700, 21.18643503618861600, 69.33813554020588300 ) ) ; +#354 = ORIENTED_EDGE ( 'NONE', *, *, #1138, .T. ) ; +#355 = VERTEX_POINT ( 'NONE', #4587 ) ; +#356 = EDGE_CURVE ( 'NONE', #1005, #1774, #2309, .T. ) ; +#357 = FACE_BOUND ( 'NONE', #801, .T. ) ; +#358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9809572502584816800, 0.1942237708554717700 ) ) ; +#359 = ORIENTED_EDGE ( 'NONE', *, *, #874, .T. ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( 39.61182136808494600, 12.49999753194997100, 15.93783860689820700 ) ) ; +#361 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ; +#362 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#363 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999996400, 12.49999753194997300, 15.00001676643945600 ) ) ; +#364 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#365 = CIRCLE ( 'NONE', #2710, 3.189999999999994200 ) ; +#366 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #794, #4092, #2680, #394 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.925929944387235000E-032, 1.570796326794896800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#367 = ORIENTED_EDGE ( 'NONE', *, *, #4009, .T. ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( 14.35034572648713100, -13.11737994431847900, 7.415429138009334200 ) ) ; +#369 = EDGE_LOOP ( 'NONE', ( #3743, #3779, #3782, #3798, #3803 ) ) ; +#370 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#371 = LINE ( 'NONE', #2676, #4254 ) ; +#372 = ORIENTED_EDGE ( 'NONE', *, *, #2881, .T. ) ; +#373 = AXIS2_PLACEMENT_3D ( 'NONE', #1678, #2032, #3774 ) ; +#374 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -5.711846095760980000, -14.27307068911293600 ) ) ; +#376 = EDGE_CURVE ( 'NONE', #3119, #3072, #2336, .T. ) ; +#377 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -4.999983233560542800 ) ) ; +#378 = EDGE_LOOP ( 'NONE', ( #3626, #3633, #3637, #3642 ) ) ; +#379 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#380 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -4.999983233560542800 ) ) ; +#381 = AXIS2_PLACEMENT_3D ( 'NONE', #893, #3464, #1307 ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -6.631762177429775000, 7.500016766439451900 ) ) ; +#383 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.131762177429775900, -14.20299705715771100 ) ) ; +#384 = EDGE_CURVE ( 'NONE', #2960, #3647, #2465, .T. ) ; +#385 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -114.1317621774297500, -10.17982295743315100 ) ) ; +#386 = AXIS2_PLACEMENT_3D ( 'NONE', #850, #2713, #433 ) ; +#387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.243794116878613800E-016, -1.000000000000000000 ) ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.44630387609749900, 65.00001676643944400 ) ) ; +#389 = EDGE_CURVE ( 'NONE', #3647, #1601, #2292, .T. ) ; +#390 = ADVANCED_FACE ( 'NONE', ( #2254 ), #2247, .T. ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( 12.88750348193717500, -13.44627106073971300, -3.332597199330517700 ) ) ; +#392 = CARTESIAN_POINT ( 'NONE', ( 13.06766588139503300, -10.73463500113415100, -9.914337676050292800 ) ) ; +#393 = CIRCLE ( 'NONE', #2740, 5.000000000000000000 ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -9.131762177429777700, -1.423983831252754500E-015 ) ) ; +#396 = LINE ( 'NONE', #810, #406 ) ; +#397 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3159, #2337, #4469, #2356, #20, #2709, #429, #3056 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001084164977628354000, 0.002168329955256708000, 0.004336659910513410800 ), + .UNSPECIFIED. ) ; +#398 = CARTESIAN_POINT ( 'NONE', ( 13.49999999999999800, 7.499997531949971700, -7.834640608427718300 ) ) ; +#399 = EDGE_CURVE ( 'NONE', #100, #3910, #2287, .T. ) ; +#400 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 60.10161676643944900 ) ) ; +#401 = FACE_OUTER_BOUND ( 'NONE', #4686, .T. ) ; +#402 = EDGE_CURVE ( 'NONE', #2850, #3952, #2262, .T. ) ; +#403 = ORIENTED_EDGE ( 'NONE', *, *, #1318, .F. ) ; +#404 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#405 = CARTESIAN_POINT ( 'NONE', ( 0.4759158661152063700, -11.29581859982507000, -14.76274895127156300 ) ) ; +#406 = VECTOR ( 'NONE', #4453, 999.9999999999998900 ) ; +#407 = AXIS2_PLACEMENT_3D ( 'NONE', #2380, #41, #2729 ) ; +#408 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#409 = DIRECTION ( 'NONE', ( 0.09676322330213899000, -2.236199922204632700E-015, -0.9953074291977231900 ) ) ; +#410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#411 = ORIENTED_EDGE ( 'NONE', *, *, #517, .T. ) ; +#412 = EDGE_CURVE ( 'NONE', #3299, #4022, #2251, .T. ) ; +#413 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#414 = LINE ( 'NONE', #2765, #460 ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( 3.364601990083148800, 7.605816048603065500, -9.993034894877384400 ) ) ; +#416 = ORIENTED_EDGE ( 'NONE', *, *, #2590, .T. ) ; +#417 = ADVANCED_FACE ( 'NONE', ( #2241 ), #2208, .T. ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( 13.44664867370885200, 7.301627779946085400, -9.244847583613234200 ) ) ; +#419 = VERTEX_POINT ( 'NONE', #2815 ) ; +#420 = AXIS2_PLACEMENT_3D ( 'NONE', #1662, #4116, #2015 ) ; +#421 = ORIENTED_EDGE ( 'NONE', *, *, #479, .T. ) ; +#422 = EDGE_CURVE ( 'NONE', #3952, #901, #2196, .T. ) ; +#423 = EDGE_LOOP ( 'NONE', ( #796, #753, #4460, #4663, #3684, #3419, #4388, #430 ) ) ; +#424 = LINE ( 'NONE', #4589, #1537 ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( 13.42465141229448200, 7.499997531949971700, -8.003269003333327800 ) ) ; +#426 = FACE_OUTER_BOUND ( 'NONE', #2413, .T. ) ; +#427 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4743, #1181, #3375, #1198, #3714, #1615, #4081, #1971, #4426, #2318 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0008579368199571386500, 0.001715873639914276200, 0.003431747279828550700, 0.006863494559657103100 ), + .UNSPECIFIED. ) ; +#428 = CARTESIAN_POINT ( 'NONE', ( 15.57521751577020600, 4.871694298500312200, -12.25942309265717600 ) ) ; +#429 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000015100, -11.85115956986372000, 10.69961778146611800 ) ) ; +#430 = ORIENTED_EDGE ( 'NONE', *, *, #1846, .F. ) ; +#431 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -8.922124212496699500, 16.38033127107230400 ) ) ; +#432 = VECTOR ( 'NONE', #1745, 1000.000000000000000 ) ; +#433 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#434 = CARTESIAN_POINT ( 'NONE', ( 17.68999999999999800, 7.499997531949971700, -4.999983233560542800 ) ) ; +#435 = ORIENTED_EDGE ( 'NONE', *, *, #3538, .F. ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( 2.706525269783679500, 7.185117492070442100, -9.661295807012741900 ) ) ; +#437 = EDGE_CURVE ( 'NONE', #807, #3974, #1190, .T. ) ; +#438 = CARTESIAN_POINT ( 'NONE', ( 12.16717264554224400, 7.878771159561039500, -9.747627195552185600 ) ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -5.711846095760980000, -14.27307068911293600 ) ) ; +#440 = ORIENTED_EDGE ( 'NONE', *, *, #3300, .T. ) ; +#441 = EDGE_CURVE ( 'NONE', #2269, #901, #2232, .T. ) ; +#442 = CIRCLE ( 'NONE', #1754, 1.000000000000000700 ) ; +#443 = AXIS2_PLACEMENT_3D ( 'NONE', #2144, #4590, #2486 ) ; +#444 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997300, 8.330719933898260300, -9.138929528173804300 ) ) ; +#445 = ADVANCED_FACE ( 'NONE', ( #2190 ), #2184, .T. ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( 16.62469018023222500, 6.676012049735128100, -10.64739879156734800 ) ) ; +#447 = PLANE ( 'NONE', #2622 ) ; +#448 = EDGE_CURVE ( 'NONE', #4358, #4036, #2157, .T. ) ; +#449 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#450 = DIRECTION ( 'NONE', ( -0.2066963473393701500, 0.2933192593767616200, -0.9334026098502353800 ) ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999753195026400, 68.12759908321882600 ) ) ; +#452 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -10.48186707534378600, -10.77203695102143200 ) ) ; +#453 = AXIS2_PLACEMENT_3D ( 'NONE', #3957, #1055, #3265 ) ; +#454 = CARTESIAN_POINT ( 'NONE', ( 1.702264495255851700, 7.199905498041129400, -9.543980381743338600 ) ) ; +#455 = CARTESIAN_POINT ( 'NONE', ( 11.86746328443361200, 7.065367680626200900, -9.949327923743240400 ) ) ; +#456 = EDGE_CURVE ( 'NONE', #2914, #4702, #2202, .T. ) ; +#457 = FACE_OUTER_BOUND ( 'NONE', #4774, .T. ) ; +#458 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.44630387609749900, 70.00001676643945800 ) ) ; +#459 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #391, #3396, #1226, #3741, #1637, #4100 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.005426163348951031600, 0.01085232669790206300 ), + .UNSPECIFIED. ) ; +#460 = VECTOR ( 'NONE', #2122, 1000.000000000000000 ) ; +#461 = CARTESIAN_POINT ( 'NONE', ( 13.72945243731256000, -11.44628093609380300, 8.877782027780828100 ) ) ; +#462 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999978900, 5.428929720084492600, 12.50001676643944900 ) ) ; +#463 = EDGE_CURVE ( 'NONE', #3737, #3580, #2177, .T. ) ; +#464 = VECTOR ( 'NONE', #2720, 1000.000000000000000 ) ; +#465 = LINE ( 'NONE', #3468, #478 ) ; +#466 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999994700, -11.44630387609749500, 65.00001676643944400 ) ) ; +#467 = CARTESIAN_POINT ( 'NONE', ( 12.88750348193717500, -13.44627106073971300, -3.332597199330517700 ) ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999997800, 7.006802532810656500, -9.999983233560549000 ) ) ; +#469 = CIRCLE ( 'NONE', #2838, 4.999999999999999100 ) ; +#470 = CARTESIAN_POINT ( 'NONE', ( 2.422631943472066700, -11.23390088079691500, -7.754174703884478600 ) ) ; +#471 = CARTESIAN_POINT ( 'NONE', ( -0.08434860775260405500, -10.59679438197408700, -10.40631446767779700 ) ) ; +#472 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ; +#473 = CYLINDRICAL_SURFACE ( 'NONE', #2810, 5.000000000000000000 ) ; +#474 = EDGE_CURVE ( 'NONE', #3364, #4303, #4419, .T. ) ; +#475 = CARTESIAN_POINT ( 'NONE', ( 0.9128476287488542800, -12.01189854471798700, -11.07183020340312900 ) ) ; +#476 = ORIENTED_EDGE ( 'NONE', *, *, #3044, .F. ) ; +#477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 8.019335917570373600E-017, 1.000000000000000000 ) ) ; +#478 = VECTOR ( 'NONE', #1311, 1000.000000000000000 ) ; +#479 = EDGE_CURVE ( 'NONE', #1702, #4161, #2147, .T. ) ; +#480 = CARTESIAN_POINT ( 'NONE', ( 12.18120110802950900, 7.891494161130028200, -9.734631108940307700 ) ) ; +#481 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #2164, #713, ( #4279 ) ) ; +#482 = ORIENTED_EDGE ( 'NONE', *, *, #583, .T. ) ; +#483 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 2.499997531949969000, 20.00001676643945100 ) ) ; +#484 = ORIENTED_EDGE ( 'NONE', *, *, #4568, .F. ) ; +#485 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#486 = AXIS2_PLACEMENT_3D ( 'NONE', #4458, #2340, #6 ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( 0.9924482408871261300, 2.627288019610017200, -12.87978940825534300 ) ) ; +#488 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 9.099997531949975700, -7.485159283662416600 ) ) ; +#489 = FACE_OUTER_BOUND ( 'NONE', #3932, .T. ) ; +#490 = CARTESIAN_POINT ( 'NONE', ( 2.689997214450254000, -11.63176217742977400, -3.277205641478954800 ) ) ; +#491 = VERTEX_POINT ( 'NONE', #3828 ) ; +#492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669298600, 0.9848077530122082400 ) ) ; +#493 = ORIENTED_EDGE ( 'NONE', *, *, #2822, .T. ) ; +#494 = EDGE_CURVE ( 'NONE', #4203, #4417, #2131, .T. ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 19.98722159839779200, 70.00001676643945800 ) ) ; +#496 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -13.17394646130280100, 20.00001676643944700 ) ) ; +#497 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#498 = AXIS2_PLACEMENT_3D ( 'NONE', #340, #2982, #759 ) ; +#499 = VERTEX_POINT ( 'NONE', #1325 ) ; +#500 = EDGE_CURVE ( 'NONE', #4702, #147, #2103, .T. ) ; +#501 = CARTESIAN_POINT ( 'NONE', ( -0.1011328220043659500, 3.561985087800131100, 12.39888394443429800 ) ) ; +#502 = VERTEX_POINT ( 'NONE', #604 ) ; +#503 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ; +#504 = ADVANCED_FACE ( 'NONE', ( #2108 ), #2084, .T. ) ; +#505 = VECTOR ( 'NONE', #2370, 1000.000000000000000 ) ; +#506 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#507 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.44630387609749900, 65.00001676643944400 ) ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( -0.002098151065383974200, 2.667247084846563700, -13.88227203707857900 ) ) ; +#509 = PERSON_AND_ORGANIZATION ( #2110, #4573 ) ; +#510 = CARTESIAN_POINT ( 'NONE', ( -0.03431383368675830500, 3.102262623439512100, -12.80032677474095400 ) ) ; +#511 = ORIENTED_EDGE ( 'NONE', *, *, #2584, .F. ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000900, -8.797537102635757800, -13.21779404818432200 ) ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 7.597114959037289100, -9.999983233560549000 ) ) ; +#514 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949969000, 13.50001676643945100 ) ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( 1.335539871201546000, -9.909493909858351700, -12.00362547642576900 ) ) ; +#516 = ORIENTED_EDGE ( 'NONE', *, *, #1295, .F. ) ; +#517 = EDGE_CURVE ( 'NONE', #223, #1324, #2137, .T. ) ; +#518 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.146386871659068900E-032, 9.912705577010325500E-017 ) ) ; +#519 = EDGE_CURVE ( 'NONE', #2322, #3459, #2091, .T. ) ; +#520 = CARTESIAN_POINT ( 'NONE', ( -0.2293542457387808800, 5.549946490428253800, 11.47555489499049700 ) ) ; +#521 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#522 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.499997531949971700, -7.834640608427718300 ) ) ; +#523 = EDGE_CURVE ( 'NONE', #147, #4239, #2088, .T. ) ; +#524 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 2.499997531949970300, 2.891202939038461200E-016 ) ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 60.10161676643944900 ) ) ; +#526 = CARTESIAN_POINT ( 'NONE', ( 0.9128476287488566100, -12.01189854471799200, -11.07183020340313300 ) ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( -0.04075306029794709800, -8.848373758148277100, -13.18252838500307800 ) ) ; +#528 = ADVANCED_FACE ( 'NONE', ( #2034 ), #3596, .T. ) ; +#529 = TOROIDAL_SURFACE ( 'NONE', #3836, 6.000000000000000000, 1.000000000000000000 ) ; +#530 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #4660, #2224, #677, #3278 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.133679135635014200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8386274899012953200, 0.8386274899012953200, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#531 = CARTESIAN_POINT ( 'NONE', ( 15.07997261454122300, -10.69090487840702300, -10.09114648580679200 ) ) ; +#532 = FACE_OUTER_BOUND ( 'NONE', #3956, .T. ) ; +#533 = EDGE_CURVE ( 'NONE', #4435, #1004, #2027, .T. ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -6.087887087724744200, -9.342762761780534200 ) ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( -4.345383527344730500, 7.499997531949969900, 8.285556533626161600 ) ) ; +#536 = CIRCLE ( 'NONE', #2801, 2.500000000000000400 ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#538 = CYLINDRICAL_SURFACE ( 'NONE', #2926, 1.000000000000000000 ) ; +#539 = CARTESIAN_POINT ( 'NONE', ( 13.63926226057843400, -12.60615277184945300, -13.18659987880299900 ) ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( 14.42720510099649700, -11.46361800697573600, -14.57858600631350000 ) ) ; +#541 = VERTEX_POINT ( 'NONE', #649 ) ; +#542 = EDGE_CURVE ( 'NONE', #3467, #1458, #4498, .T. ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( -0.5057610440314876900, -11.60452512299995400, -4.463437471997282900 ) ) ; +#544 = CIRCLE ( 'NONE', #2944, 0.4999999999999998300 ) ; +#545 = EDGE_CURVE ( 'NONE', #1599, #2269, #2024, .T. ) ; +#546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#547 = ORIENTED_EDGE ( 'NONE', *, *, #2345, .T. ) ; +#548 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#549 = EDGE_CURVE ( 'NONE', #4203, #880, #2860, .T. ) ; +#550 = ORIENTED_EDGE ( 'NONE', *, *, #2768, .F. ) ; +#551 = EDGE_LOOP ( 'NONE', ( #2650, #3183, #4394, #3793 ) ) ; +#552 = EDGE_CURVE ( 'NONE', #3418, #4417, #2073, .T. ) ; +#553 = CYLINDRICAL_SURFACE ( 'NONE', #2951, 5.101600000000001200 ) ; +#554 = ORIENTED_EDGE ( 'NONE', *, *, #2059, .T. ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( 2.212102063844037000, -13.44008140608651800, -4.513099128867160000 ) ) ; +#556 = ORIENTED_EDGE ( 'NONE', *, *, #313, .F. ) ; +#557 = AXIS2_PLACEMENT_3D ( 'NONE', #3571, #1433, #3934 ) ; +#558 = CARTESIAN_POINT ( 'NONE', ( 12.55635277523638900, 24.21799501714535200, 69.00004516115481600 ) ) ; +#559 = PLANE ( 'NONE', #4255 ) ; +#560 = DIRECTION ( 'NONE', ( 9.912705577010325500E-017, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#561 = CIRCLE ( 'NONE', #2973, 0.5000000000000004400 ) ; +#562 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9641149129481749700, 0.2654852813828537100 ) ) ; +#563 = EDGE_CURVE ( 'NONE', #1599, #4593, #2134, .T. ) ; +#564 = CARTESIAN_POINT ( 'NONE', ( 2.101326334673491400, -13.28278137706928600, -6.232248187999824800 ) ) ; +#565 = ORIENTED_EDGE ( 'NONE', *, *, #2128, .F. ) ; +#566 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 17.50001676643945100 ) ) ; +#567 = ORIENTED_EDGE ( 'NONE', *, *, #819, .F. ) ; +#568 = EDGE_CURVE ( 'NONE', #1004, #3622, #1986, .T. ) ; +#569 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#570 = EDGE_CURVE ( 'NONE', #4551, #1976, #1992, .T. ) ; +#571 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #157, #993, #1808 ), + ( #4261, #2159, #4607 ), + ( #2499, #177, #2853 ), + ( #596, #3208, #1013 ), + ( #3566, #1430, #3931 ), + ( #1825, #4275, #2174 ), + ( #4623, #2513, #193 ), + ( #2872, #615, #3223 ), + ( #1033, #3585, #1447 ), + ( #3945, #1843, #4293 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001282389549613295700, 0.002564779099226591500, 0.003847168648839887000, 0.005129558198453182900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6624054580141201000, 1.000000000000000000), + ( 1.000000000000000000, 0.6055564185947524000, 1.000000000000000000), + ( 1.000000000000000000, 0.5641894674501520800, 1.000000000000000000), + ( 1.000000000000000000, 0.4971694276137431100, 1.000000000000000000), + ( 1.000000000000000000, 0.4715089957873018800, 1.000000000000000000), + ( 1.000000000000000000, 0.4320342461207059600, 1.000000000000000000), + ( 1.000000000000000000, 0.4178578969929912000, 1.000000000000000000), + ( 1.000000000000000000, 0.3988042785917853000, 1.000000000000000000), + ( 1.000000000000000000, 0.3942251573742503500, 1.000000000000000000), + ( 1.000000000000000000, 0.3941798799758684500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#572 = ORIENTED_EDGE ( 'NONE', *, *, #1893, .T. ) ; +#573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#574 = CIRCLE ( 'NONE', #1353, 4.999999999999999100 ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 11.93771149298147800, 22.47418805491858500, 70.06431829635755500 ) ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( 10.34550899354867500, 20.75336956103899100, 69.46575892129568800 ) ) ; +#577 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999994700, -114.1317621774297500, -10.17982295743315100 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 2.060433152822366500, -10.88183125921804600, -9.379791629619193200 ) ) ; +#579 = CARTESIAN_POINT ( 'NONE', ( 1.932334118604964100, -10.73463500113415300, -9.914337676050291000 ) ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -6.199983233560547400 ) ) ; +#581 = EDGE_CURVE ( 'NONE', #1878, #2055, #1974, .T. ) ; +#582 = ADVANCED_FACE ( 'NONE', ( #1964 ), #4732, .T. ) ; +#583 = EDGE_CURVE ( 'NONE', #2850, #4593, #1920, .T. ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( 13.66862032176170200, -11.51563589717441300, 8.606520411889597700 ) ) ; +#585 = CIRCLE ( 'NONE', #381, 0.9999999999999991100 ) ; +#586 = VECTOR ( 'NONE', #1697, 1000.000000000000000 ) ; +#587 = CIRCLE ( 'NONE', #2979, 0.4999999999999993900 ) ; +#588 = EDGE_CURVE ( 'NONE', #4392, #1381, #1970, .T. ) ; +#589 = CARTESIAN_POINT ( 'NONE', ( 11.38458560271176400, 20.75465216147551600, 69.81994236297015300 ) ) ; +#590 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.131762177429775900, -14.20299705715771100 ) ) ; +#591 = ADVANCED_FACE ( 'NONE', ( #1926 ), #1520, .F. ) ; +#592 = VECTOR ( 'NONE', #4479, 1000.000000000000000 ) ; +#593 = CARTESIAN_POINT ( 'NONE', ( 12.51398340468320000, -13.45598587603860700, -11.84052867468014700 ) ) ; +#594 = FACE_OUTER_BOUND ( 'NONE', #3852, .T. ) ; +#595 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( 3.317843946801445600, 22.05281578652232400, 69.17886957216853700 ) ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( -3.685259511207362500, 7.366759779046376800, -9.149381097220146600 ) ) ; +#598 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -4.999983233560542800 ) ) ; +#599 = EDGE_CURVE ( 'NONE', #4349, #3732, #1886, .T. ) ; +#600 = CYLINDRICAL_SURFACE ( 'NONE', #2998, 1.200000000000004800 ) ; +#601 = ORIENTED_EDGE ( 'NONE', *, *, #1645, .T. ) ; +#602 = CARTESIAN_POINT ( 'NONE', ( 15.06297084842787700, -10.93973068792892200, 10.05813958585784500 ) ) ; +#603 = CIRCLE ( 'NONE', #3005, 1.000000000000000400 ) ; +#604 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 9.099997531949975700, -8.189983233560536000 ) ) ; +#605 = ADVANCED_FACE ( 'NONE', ( #1880 ), #1865, .T. ) ; +#606 = ORIENTED_EDGE ( 'NONE', *, *, #313, .T. ) ; +#607 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( 2.664321024624431100, 21.69164840740149500, 69.60630217296969100 ) ) ; +#609 = CARTESIAN_POINT ( 'NONE', ( 13.66336169476738100, -9.911377891128420700, -12.00052498222400400 ) ) ; +#610 = FACE_OUTER_BOUND ( 'NONE', #4441, .T. ) ; +#611 = EDGE_LOOP ( 'NONE', ( #3221, #3230, #3248, #3292 ) ) ; +#612 = ORIENTED_EDGE ( 'NONE', *, *, #1372, .T. ) ; +#613 = ADVANCED_FACE ( 'NONE', ( #1876 ), #3730, .T. ) ; +#614 = CARTESIAN_POINT ( 'NONE', ( 1.700434018723674400, 7.510965283274655800, -7.958481243559094600 ) ) ; +#615 = CARTESIAN_POINT ( 'NONE', ( 2.437501216227210100, 24.25871447111125400, 70.14902501687262800 ) ) ; +#616 = CYLINDRICAL_SURFACE ( 'NONE', #3026, 1.000000000000000900 ) ; +#617 = EDGE_CURVE ( 'NONE', #3622, #1728, #1857, .T. ) ; +#618 = CARTESIAN_POINT ( 'NONE', ( -0.5680838259745036900, 5.883410208786740400, -11.52790408678231900 ) ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( 1.897852104449083300, -11.63176217742977200, 3.906261287020117200 ) ) ; +#620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#621 = VERTEX_POINT ( 'NONE', #4017 ) ; +#622 = ORIENTED_EDGE ( 'NONE', *, *, #1285, .F. ) ; +#623 = ADVANCED_FACE ( 'NONE', ( #1869 ), #1831, .T. ) ; +#624 = CIRCLE ( 'NONE', #3034, 0.4999999999999997200 ) ; +#625 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000005600, 7.499997531949971700, -3.799983233560537700 ) ) ; +#626 = ORIENTED_EDGE ( 'NONE', *, *, #1098, .T. ) ; +#627 = EDGE_CURVE ( 'NONE', #1728, #2743, #1860, .T. ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 12.49999753194997600, -4.999983233560542800 ) ) ; +#629 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4563, #2116, #539, #3155 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002542744231120836400 ), + .UNSPECIFIED. ) ; +#630 = ORIENTED_EDGE ( 'NONE', *, *, #1626, .F. ) ; +#631 = AXIS2_PLACEMENT_3D ( 'NONE', #3017, #2667, #4428 ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 2.499997531949970300, 2.891202939038461200E-016 ) ) ; +#633 = CARTESIAN_POINT ( 'NONE', ( 15.08434860775261300, -10.59679438197408900, -10.40631446767779700 ) ) ; +#634 = VERTEX_POINT ( 'NONE', #2832 ) ; +#635 = CIRCLE ( 'NONE', #1241, 3.750000000000000000 ) ; +#636 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000005600, 12.49999753194997600, -3.799983233560537700 ) ) ; +#637 = EDGE_CURVE ( 'NONE', #100, #4662, #1826, .T. ) ; +#638 = CARTESIAN_POINT ( 'NONE', ( 2.373615163842640800, 7.990902828578685800, -7.582525212001117500 ) ) ; +#639 = CARTESIAN_POINT ( 'NONE', ( 14.01749857417830600, 2.833606966060063100, -12.84340981136485600 ) ) ; +#640 = ORIENTED_EDGE ( 'NONE', *, *, #819, .T. ) ; +#641 = ADVANCED_FACE ( 'NONE', ( #1810 ), #559, .F. ) ; +#642 = CARTESIAN_POINT ( 'NONE', ( -0.3647145102379784600, -11.63176217742977200, -2.720575489757423200 ) ) ; +#643 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2923, #1097, #3640, #1509, #3993, #1892, #4346, #2235 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0008427583595535427400, 0.001685516719107085500, 0.003371033438214163600 ), + .UNSPECIFIED. ) ; +#644 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999998200, 6.747595387856066800, -10.47242612937174400 ) ) ; +#645 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999998400, 7.404783783242378600, -8.805759462705077900 ) ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( -25.17253244069548000, 12.49999753194997600, 17.15617702338308700 ) ) ; +#647 = ADVANCED_FACE ( 'NONE', ( #1807 ), #65, .T. ) ; +#648 = CARTESIAN_POINT ( 'NONE', ( 13.83458235174379200, -12.34049684824547600, -10.17982295743314600 ) ) ; +#649 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949968500, 15.00001676643945100 ) ) ; +#650 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.131762177429775900, -10.17982295743313700 ) ) ; +#651 = ADVANCED_FACE ( 'NONE', ( #1762 ), #2847, .T. ) ; +#652 = CARTESIAN_POINT ( 'NONE', ( 13.11480939285645800, -13.41184584846352800, -1.546660054777321700 ) ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.186988295993375100, 17.50001676643945100 ) ) ; +#654 = EDGE_CURVE ( 'NONE', #3732, #1149, #1776, .T. ) ; +#655 = EDGE_CURVE ( 'NONE', #4392, #2362, #1771, .T. ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -11.33640205742939600, 11.22377341792960700 ) ) ; +#657 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#658 = LINE ( 'NONE', #1223, #464 ) ; +#659 = CARTESIAN_POINT ( 'NONE', ( 2.874827788129666200, -13.66794401343043000, -11.64857839814771600 ) ) ; +#660 = FACE_OUTER_BOUND ( 'NONE', #4189, .T. ) ; +#661 = AXIS2_PLACEMENT_3D ( 'NONE', #3305, #1116, #3653 ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( 12.35478845197675600, -11.43893777313032500, -6.388739768125171600 ) ) ; +#663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#664 = ADVANCED_FACE ( 'NONE', ( #1800 ), #1753, .T. ) ; +#665 = FACE_OUTER_BOUND ( 'NONE', #1201, .T. ) ; +#666 = EDGE_CURVE ( 'NONE', #2039, #3283, #1719, .T. ) ; +#667 = DIRECTION ( 'NONE', ( 1.368455531567204200E-048, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#668 = AXIS2_PLACEMENT_3D ( 'NONE', #3207, #4622, #1429 ) ; +#669 = ADVANCED_FACE ( 'NONE', ( #1705 ), #1691, .T. ) ; +#670 = CARTESIAN_POINT ( 'NONE', ( 13.48027658118971700, -11.63176217742977600, 7.500016766439452800 ) ) ; +#671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 8.019335917570373600E-017 ) ) ; +#672 = VECTOR ( 'NONE', #4061, 1000.000000000000000 ) ; +#673 = CARTESIAN_POINT ( 'NONE', ( -0.1399410965493579100, -11.63495115337433600, 7.817130186604076800 ) ) ; +#674 = ORIENTED_EDGE ( 'NONE', *, *, #323, .F. ) ; +#675 = EDGE_CURVE ( 'NONE', #2301, #4245, #1699, .T. ) ; +#676 = FACE_OUTER_BOUND ( 'NONE', #2527, .T. ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( 15.44197621097976700, 5.808642352861677500, -13.30426915525199000 ) ) ; +#678 = EDGE_LOOP ( 'NONE', ( #4501, #3919, #3346, #4555, #2624, #2641, #1982, #1769 ) ) ; +#679 = EDGE_LOOP ( 'NONE', ( #3427, #3463, #3471, #3480 ) ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( 15.50803640886553000, -11.59303630241470300, -4.683594812412977100 ) ) ; +#681 = FACE_OUTER_BOUND ( 'NONE', #3624, .T. ) ; +#682 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ; +#683 = ORIENTED_EDGE ( 'NONE', *, *, #252, .T. ) ; +#684 = CIRCLE ( 'NONE', #3052, 0.4999999999999998300 ) ; +#685 = EDGE_CURVE ( 'NONE', #2055, #3076, #1750, .T. ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 10.10437889654857600, 20.59801037049166800, 70.01626317724741000 ) ) ; +#687 = ORIENTED_EDGE ( 'NONE', *, *, #2293, .F. ) ; +#688 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914452962100, 3.244746686838852100, -13.76770913345428000 ) ) ; +#690 = ORIENTED_EDGE ( 'NONE', *, *, #4098, .F. ) ; +#691 = EDGE_CURVE ( 'NONE', #621, #4551, #1709, .T. ) ; +#692 = ADVANCED_FACE ( 'NONE', ( #1638 ), #1836, .T. ) ; +#693 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#694 = VECTOR ( 'NONE', #746, 1000.000000000000000 ) ; +#695 = ORIENTED_EDGE ( 'NONE', *, *, #1098, .F. ) ; +#696 = AXIS2_PLACEMENT_3D ( 'NONE', #2927, #688, #3286 ) ; +#697 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#698 = ADVANCED_FACE ( 'NONE', ( #1642, #1655 ), #2975, .F. ) ; +#699 = EDGE_CURVE ( 'NONE', #1976, #3063, #1594, .T. ) ; +#700 = CARTESIAN_POINT ( 'NONE', ( 12.88750348193712400, -13.44627106073972200, -3.332597199330517700 ) ) ; +#701 = ORIENTED_EDGE ( 'NONE', *, *, #2665, .F. ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -114.1317621774297500, -10.17982295743315100 ) ) ; +#703 = ORIENTED_EDGE ( 'NONE', *, *, #542, .T. ) ; +#704 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1942237708554718200, -0.9809572502584816800 ) ) ; +#705 = EDGE_CURVE ( 'NONE', #880, #2517, #1630, .T. ) ; +#706 = FACE_OUTER_BOUND ( 'NONE', #3360, .T. ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 15.16470979304348500, 3.838373829557664600, 12.33530697339522500 ) ) ; +#708 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#709 = APPROVAL_PERSON_ORGANIZATION ( #763, #4129, #1526 ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 67.50001676643944400 ) ) ; +#711 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#712 = CARTESIAN_POINT ( 'NONE', ( 13.20795709228034400, 7.143280785576715500, -9.702307009910333200 ) ) ; +#713 = DATE_TIME_ROLE ( 'classification_date' ) ; +#714 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, 8.356161260594987500, -7.485159283662415700 ) ) ; +#715 = CARTESIAN_POINT ( 'NONE', ( 0.03179697099384568000, -11.85653630523811800, 10.64961079419129100 ) ) ; +#716 = ADVANCED_FACE ( 'NONE', ( #1582 ), #1568, .F. ) ; +#717 = DIRECTION ( 'NONE', ( -0.1473245215649223400, 0.9780546869635324800, 0.1473245215649220700 ) ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 10.60208186243800700, 20.94988510403725400, 69.40784625110310900 ) ) ; +#719 = EDGE_CURVE ( 'NONE', #3370, #4124, #1572, .T. ) ; +#720 = CARTESIAN_POINT ( 'NONE', ( 15.70000000000001200, 9.099997531949975700, -4.999983233560542800 ) ) ; +#721 = VECTOR ( 'NONE', #3060, 1000.000000000000000 ) ; +#722 = CYLINDRICAL_SURFACE ( 'NONE', #3094, 1.000000000000000000 ) ; +#723 = ADVANCED_FACE ( 'NONE', ( #1625 ), #1591, .T. ) ; +#724 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -7.278431756804106800, 15.07753286912450700 ) ) ; +#725 = CARTESIAN_POINT ( 'NONE', ( 16.23306594175248900, 5.804131285567930100, 12.02033763633621700 ) ) ; +#726 = AXIS2_PLACEMENT_3D ( 'NONE', #3549, #1416, #3912 ) ; +#727 = CARTESIAN_POINT ( 'NONE', ( 8.597530647281466600E-014, 24.40859220248858100, 68.13452563932824500 ) ) ; +#728 = CARTESIAN_POINT ( 'NONE', ( 15.03104491432332400, 3.080560995830244700, -13.79738671111937800 ) ) ; +#729 = CARTESIAN_POINT ( 'NONE', ( 12.33813360682362200, 21.69495882794514300, 69.60574893551104500 ) ) ; +#730 = CIRCLE ( 'NONE', #486, 3.750000000000000000 ) ; +#731 = CIRCLE ( 'NONE', #3098, 4.999999999999997300 ) ; +#732 = EDGE_CURVE ( 'NONE', #4328, #1133, #1534, .T. ) ; +#733 = LINE ( 'NONE', #2285, #672 ) ; +#734 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#735 = EDGE_LOOP ( 'NONE', ( #2249, #2263, #2312, #2349 ) ) ; +#736 = EDGE_CURVE ( 'NONE', #4328, #2467, #1563, .T. ) ; +#737 = LINE ( 'NONE', #3338, #694 ) ; +#738 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.55293979002667700, 65.00001676643944400 ) ) ; +#739 = ORIENTED_EDGE ( 'NONE', *, *, #2412, .T. ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.131762177429775900, -14.20299705715771100 ) ) ; +#741 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 7.499997531949969000, 7.500016766439443000 ) ) ; +#742 = CIRCLE ( 'NONE', #3192, 5.000000000000004400 ) ; +#743 = ADVANCED_FACE ( 'NONE', ( #1575 ), #1511, .T. ) ; +#744 = CARTESIAN_POINT ( 'NONE', ( 2.448425233789384600, 22.46699153297381500, 69.68007763440047600 ) ) ; +#745 = ORIENTED_EDGE ( 'NONE', *, *, #2855, .T. ) ; +#746 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#747 = EDGE_CURVE ( 'NONE', #1946, #2154, #1506, .T. ) ; +#748 = VERTEX_POINT ( 'NONE', #1968 ) ; +#749 = VECTOR ( 'NONE', #4019, 1000.000000000000000 ) ; +#750 = CARTESIAN_POINT ( 'NONE', ( 12.55157476621506000, 22.46699153297452900, 69.68007763439770500 ) ) ; +#751 = ORIENTED_EDGE ( 'NONE', *, *, #2555, .F. ) ; +#752 = ADVANCED_FACE ( 'NONE', ( #1498 ), #1455, .F. ) ; +#753 = ORIENTED_EDGE ( 'NONE', *, *, #1219, .T. ) ; +#754 = SHAPE_DEFINITION_REPRESENTATION ( #126, #4170 ) ; +#755 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, -23.22509174754585400, -9.999983233560549000 ) ) ; +#756 = LINE ( 'NONE', #1545, #749 ) ; +#757 = ORIENTED_EDGE ( 'NONE', *, *, #262, .T. ) ; +#758 = EDGE_CURVE ( 'NONE', #4356, #4303, #1470, .T. ) ; +#759 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#760 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999800, 23.50835458780443300, 65.51158888507843900 ) ) ; +#761 = ORIENTED_EDGE ( 'NONE', *, *, #1318, .T. ) ; +#762 = EDGE_CURVE ( 'NONE', #3647, #4716, #1503, .T. ) ; +#763 = PERSON_AND_ORGANIZATION ( #2110, #4573 ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 21.30411613570581900, 65.03261802005714300 ) ) ; +#765 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949972500, -14.99998323356054700 ) ) ; +#766 = CARTESIAN_POINT ( 'NONE', ( -0.2079955368538095600, 4.078404084381732600, -12.62664507157359500 ) ) ; +#767 = LINE ( 'NONE', #900, #2758 ) ; +#768 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#769 = ORIENTED_EDGE ( 'NONE', *, *, #323, .T. ) ; +#770 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999973200, 21.34503280140555900, 68.64811989394640100 ) ) ; +#771 = LINE ( 'NONE', #3160, #1840 ) ; +#772 = EDGE_CURVE ( 'NONE', #3520, #3531, #903, .T. ) ; +#773 = CARTESIAN_POINT ( 'NONE', ( 15.00209859039124700, 2.667255832933153000, -13.88227018605004500 ) ) ; +#774 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949969000, 13.50001676643945100 ) ) ; +#775 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #2852, #595 ) ; +#776 = EDGE_CURVE ( 'NONE', #4451, #4091, #1441, .T. ) ; +#777 = ADVANCED_FACE ( 'NONE', ( #1448 ), #2633, .T. ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( 39.24379811620146100, 12.49999753194996900, 15.58576060265666500 ) ) ; +#779 = CARTESIAN_POINT ( 'NONE', ( 1.706484653927567300E-018, -6.622779069733818200, 15.00001676643945100 ) ) ; +#780 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999997800, -23.22509174754585400, -8.999983233560552500 ) ) ; +#781 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 9.099997531949975700, -2.514807183458669800 ) ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( -25.19174207655504500, 12.49999753194996900, 17.50001676643945100 ) ) ; +#783 = EDGE_CURVE ( 'NONE', #4758, #3459, #1406, .T. ) ; +#784 = VECTOR ( 'NONE', #3050, 1000.000000000000000 ) ; +#785 = CIRCLE ( 'NONE', #3070, 0.5000000000000004400 ) ; +#786 = EDGE_CURVE ( 'NONE', #1728, #3416, #1401, .T. ) ; +#787 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -8.189983233560536000 ) ) ; +#789 = TOROIDAL_SURFACE ( 'NONE', #3154, 105.0000000000000100, 5.000000000000000000 ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( 14.06693147497343300, 3.393696517816629400, -13.76770913345428400 ) ) ; +#791 = DIRECTION ( 'NONE', ( 0.7835250082645941500, -0.6001212954369282700, 0.1610682842370607900 ) ) ; +#792 = FACE_OUTER_BOUND ( 'NONE', #4514, .T. ) ; +#793 = EDGE_CURVE ( 'NONE', #3622, #1336, #333, .T. ) ; +#794 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949969000, 13.50001676643945100 ) ) ; +#795 = CARTESIAN_POINT ( 'NONE', ( 14.85370931188708900, -10.34051909454907300, -13.36958433918897900 ) ) ; +#796 = ORIENTED_EDGE ( 'NONE', *, *, #52, .F. ) ; +#797 = CYLINDRICAL_SURFACE ( 'NONE', #3162, 35.00000000000000000 ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, -13.17394646130280100, 20.00001676643944700 ) ) ; +#799 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3651, #1532, #3663, #1550 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 5.235987755982988800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9772838841927120600, 0.9772838841927120600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#800 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.334911017704057100E-014, -1.000000000000000000 ) ) ; +#801 = EDGE_LOOP ( 'NONE', ( #4195, #411 ) ) ; +#802 = ORIENTED_EDGE ( 'NONE', *, *, #4667, .F. ) ; +#803 = EDGE_CURVE ( 'NONE', #1336, #3746, #1434, .T. ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949971700, -7.834640608427718300 ) ) ; +#805 = CIRCLE ( 'NONE', #3182, 4.999999999999997300 ) ; +#806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#807 = VERTEX_POINT ( 'NONE', #3678 ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( 0.9825014258216910900, 2.833606966060063100, -12.84340981136485400 ) ) ; +#809 = EDGE_LOOP ( 'NONE', ( #354, #482, #1580, #3353, #2521, #4398, #1710 ) ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.715916581326906600, -15.40272833127762900 ) ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 9.099997531949975700, -4.999983233560542800 ) ) ; +#812 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -11.33640205742938900, 11.22377341792961200 ) ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 19.98722159839779500, 69.50001676643945800 ) ) ; +#814 = FACE_OUTER_BOUND ( 'NONE', #1988, .T. ) ; +#815 = ORIENTED_EDGE ( 'NONE', *, *, #826, .T. ) ; +#816 = ORIENTED_EDGE ( 'NONE', *, *, #3088, .F. ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( 13.83458235174382100, -12.34049684824548800, -10.17982295743313700 ) ) ; +#818 = LINE ( 'NONE', #3999, #851 ) ; +#819 = EDGE_CURVE ( 'NONE', #3016, #419, #3796, .T. ) ; +#820 = CARTESIAN_POINT ( 'NONE', ( 0.9946669241610293100, -12.12800691064679600, -10.77624551656416500 ) ) ; +#821 = ORIENTED_EDGE ( 'NONE', *, *, #1224, .F. ) ; +#822 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#823 = EDGE_CURVE ( 'NONE', #1336, #2344, #2493, .T. ) ; +#824 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#825 = ORIENTED_EDGE ( 'NONE', *, *, #4770, .T. ) ; +#826 = EDGE_CURVE ( 'NONE', #2106, #3913, #1384, .T. ) ; +#827 = ADVANCED_FACE ( 'NONE', ( #1440 ), #1335, .F. ) ; +#828 = CARTESIAN_POINT ( 'NONE', ( 15.03431383368676100, 3.102262623439511200, -12.80032677474095600 ) ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( 0.1323451913167653900, -10.29503879626112500, -15.55700365127116500 ) ) ; +#830 = EDGE_CURVE ( 'NONE', #1005, #4702, #4139, .T. ) ; +#831 = CARTESIAN_POINT ( 'NONE', ( 0.002330373367838423100, 2.579063988065848800, -12.88829260613512100 ) ) ; +#832 = ORIENTED_EDGE ( 'NONE', *, *, #4568, .T. ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( 13.13068561203151000, 24.99999753195032800, 69.62872473842183800 ) ) ; +#834 = CARTESIAN_POINT ( 'NONE', ( 2.112496518062820800, -13.44627106073971100, -3.332597199330517700 ) ) ; +#835 = LINE ( 'NONE', #2268, #4473 ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949972100, -13.91766076750309200 ) ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( 3.229203980178057000, 6.754846294782055300, -10.46084556421421800 ) ) ; +#838 = CARTESIAN_POINT ( 'NONE', ( 12.51737658835717500, 7.323488787158882300, -9.201421252307568500 ) ) ; +#839 = EDGE_CURVE ( 'NONE', #1381, #2467, #1340, .T. ) ; +#840 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 7.499997531949971700, -2.514807183458670300 ) ) ; +#841 = AXIS2_PLACEMENT_3D ( 'NONE', #4524, #1700, #4169 ) ; +#842 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 9.099997531949975700, -6.199983233560552700 ) ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( 13.47101724766299400, 7.499997531949971700, -7.899448856067168700 ) ) ; +#844 = EDGE_CURVE ( 'NONE', #147, #1004, #2442, .T. ) ; +#845 = CARTESIAN_POINT ( 'NONE', ( 15.93321719845772200, 5.423856986063211300, -12.71477997027845700 ) ) ; +#846 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -11.33640205742939100, 11.22377341792960700 ) ) ; +#847 = EDGE_CURVE ( 'NONE', #4029, #2850, #4558, .T. ) ; +#848 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 67.50001676643944400 ) ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -8.653463125064339700, 15.96365829881509900 ) ) ; +#850 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 67.50001676643944400 ) ) ; +#851 = VECTOR ( 'NONE', #1900, 1000.000000000000000 ) ; +#852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( 2.742917989606083600, 7.965207177063466500, -9.656430474292236000 ) ) ; +#854 = ADVANCED_FACE ( 'NONE', ( #1321, #1317 ), #3118, .F. ) ; +#855 = CARTESIAN_POINT ( 'NONE', ( 12.83434529142447300, 6.982308886290525200, -10.05183273202158900 ) ) ; +#856 = CYLINDRICAL_SURFACE ( 'NONE', #3258, 0.9999999999999991100 ) ; +#857 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, 2.455444314826512400, -13.92551670175932300 ) ) ; +#858 = EDGE_CURVE ( 'NONE', #4551, #2039, #1368, .T. ) ; +#859 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -4.999983233560542800 ) ) ; +#860 = FACE_OUTER_BOUND ( 'NONE', #2089, .T. ) ; +#861 = EDGE_CURVE ( 'NONE', #3413, #4280, #1314, .T. ) ; +#862 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 8.385741033500860200, -8.999983233560550700 ) ) ; +#863 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #4194, #1902, ( #3657 ) ) ; +#864 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ; +#865 = CARTESIAN_POINT ( 'NONE', ( 17.48566550606923200, 6.877746622471411400, -10.34897510236279800 ) ) ; +#866 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #487, #4521, #3826 ), + ( #1734, #4182, #2080 ), + ( #4535, #2427, #87 ), + ( #2773, #510, #3123 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -6.505213034913026600E-019, 0.0006035545030861194900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7101794051988757900, 1.000000000000000000), + ( 1.000000000000000000, 0.7120522622251735900, 1.000000000000000000), + ( 1.000000000000000000, 0.7136248577316775000, 1.000000000000000000), + ( 1.000000000000000000, 0.7149077045844134400, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#867 = CIRCLE ( 'NONE', #3345, 5.000000000000004400 ) ; +#868 = AXIS2_PLACEMENT_3D ( 'NONE', #875, #2033, #2731 ) ; +#869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#870 = CARTESIAN_POINT ( 'NONE', ( 13.13070476790412800, 24.63997360066741400, 69.62871356779710700 ) ) ; +#871 = EDGE_LOOP ( 'NONE', ( #4294, #4332, #4340, #4384 ) ) ; +#872 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 8.489810784768483400, -7.485159283662415700 ) ) ; +#873 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#874 = EDGE_CURVE ( 'NONE', #2310, #3359, #1327, .T. ) ; +#875 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 9.999997531949972500, -14.99998323356054400 ) ) ; +#876 = FACE_OUTER_BOUND ( 'NONE', #871, .T. ) ; +#877 = CARTESIAN_POINT ( 'NONE', ( 2.458873648389793100, 7.367197593663244800, -9.009086362253023900 ) ) ; +#878 = ORIENTED_EDGE ( 'NONE', *, *, #2613, .T. ) ; +#879 = CARTESIAN_POINT ( 'NONE', ( 11.63750138343158700, 7.597114964497762900, -9.999983233560547200 ) ) ; +#880 = VERTEX_POINT ( 'NONE', #4601 ) ; +#881 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#882 = CIRCLE ( 'NONE', #3210, 5.946222222222226100 ) ; +#883 = CARTESIAN_POINT ( 'NONE', ( -0.07908012879652706600, -10.85326599177283500, -9.483526948552256600 ) ) ; +#884 = ORIENTED_EDGE ( 'NONE', *, *, #4125, .T. ) ; +#885 = EDGE_CURVE ( 'NONE', #1417, #2644, #1271, .T. ) ; +#886 = CARTESIAN_POINT ( 'NONE', ( 13.56141962924746900, -11.60760800896203200, 8.063727655267765500 ) ) ; +#887 = EDGE_LOOP ( 'NONE', ( #3290, #3301, #3315, #3319, #3347 ) ) ; +#888 = CARTESIAN_POINT ( 'NONE', ( 11.57518125554263500, 7.597114959037286400, -9.999983233560545400 ) ) ; +#889 = CYLINDRICAL_SURFACE ( 'NONE', #3284, 5.000000000000000000 ) ; +#890 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.8493824917455924400, 0.5277777777777771200 ) ) ; +#891 = ORIENTED_EDGE ( 'NONE', *, *, #412, .F. ) ; +#892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -9.131762177429775900, -14.20299705715771100 ) ) ; +#894 = CARTESIAN_POINT ( 'NONE', ( 1.360737739421565600, -12.60615277184945300, -13.18659987880299900 ) ) ; +#895 = CARTESIAN_POINT ( 'NONE', ( 2.687594030977641200, -11.47933659219354600, -6.090147375379448400 ) ) ; +#896 = ORIENTED_EDGE ( 'NONE', *, *, #4331, .T. ) ; +#897 = AXIS2_PLACEMENT_3D ( 'NONE', #4692, #2600, #307 ) ; +#898 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, -23.22509174754585400, -8.999983233560550700 ) ) ; +#899 = LINE ( 'NONE', #4096, #3818 ) ; +#900 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 12.49999753194997600, -9.999983233560549000 ) ) ; +#901 = VERTEX_POINT ( 'NONE', #188 ) ; +#902 = EDGE_CURVE ( 'NONE', #1005, #1211, #1374, .T. ) ; +#903 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2260, #4436, #4765, #3231, #1043, #3594, #1463 ), + .UNSPECIFIED., .F., .F., + ( 4, 3, 4 ), + ( -1.414213562378411800E-005, 1.694065894508600700E-021, 0.0001705547661386651300 ), + .UNSPECIFIED. ) ; +#904 = LINE ( 'NONE', #3884, #1848 ) ; +#905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( 12.37557636609325900, 8.101674205686331100, -9.499126870282991000 ) ) ; +#907 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, 2.326349354283042500, -12.93285301449088300 ) ) ; +#908 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#909 = EDGE_CURVE ( 'NONE', #4392, #3413, #1251, .T. ) ; +#910 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, 26.77590825245414800, 41.25001676643945100 ) ) ; +#911 = CARTESIAN_POINT ( 'NONE', ( 0.6698729810778060200, -11.63176217742977200, -14.39404467726971100 ) ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( 2.443741056229484300, 24.21517643013611800, 69.00006649673284200 ) ) ; +#913 = DIRECTION ( 'NONE', ( 1.000000000000000000, 6.938893903907227400E-016, 0.0000000000000000000 ) ) ; +#914 = CARTESIAN_POINT ( 'NONE', ( 0.7137808068205149200, -11.71551275266089800, -11.72365922492985900 ) ) ; +#915 = EDGE_CURVE ( 'NONE', #4702, #3307, #1265, .T. ) ; +#916 = CARTESIAN_POINT ( 'NONE', ( -0.2553694775568246500, 4.111075824982069800, 13.19357339337111600 ) ) ; +#917 = LINE ( 'NONE', #3426, #592 ) ; +#918 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#919 = FACE_OUTER_BOUND ( 'NONE', #679, .T. ) ; +#920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.8493824917455924400, -0.5277777777777770100 ) ) ; +#921 = CYLINDRICAL_SURFACE ( 'NONE', #3308, 3.189999999999994200 ) ; +#922 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 12.49999753194997300, 7.500016766439455500 ) ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( 0.4194248427962631900, -11.15333879607346800, -12.54973643448936300 ) ) ; +#924 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#925 = LINE ( 'NONE', #4314, #941 ) ; +#926 = DIRECTION ( 'NONE', ( -1.368455531567204200E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#927 = EDGE_CURVE ( 'NONE', #502, #4079, #1246, .T. ) ; +#928 = ORIENTED_EDGE ( 'NONE', *, *, #2441, .F. ) ; +#929 = CARTESIAN_POINT ( 'NONE', ( -0.9974596322019032600, 5.536983494900884900, 11.50255713423829800 ) ) ; +#930 = CIRCLE ( 'NONE', #3493, 35.00000000000000000 ) ; +#931 = EDGE_CURVE ( 'NONE', #147, #3801, #1236, .T. ) ; +#932 = ORIENTED_EDGE ( 'NONE', *, *, #3363, .F. ) ; +#933 = ADVANCED_FACE ( 'NONE', ( #1203, #1188 ), #2953, .F. ) ; +#934 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999997800, 2.499997531949971200, -7.834640608427718300 ) ) ; +#935 = ORIENTED_EDGE ( 'NONE', *, *, #4094, .T. ) ; +#936 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.3428655981591505200, -0.9393844695325595000 ) ) ; +#937 = AXIS2_PLACEMENT_3D ( 'NONE', #1679, #4489, #24 ) ; +#938 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 16.48528137423857100, 7.499997531949970800, 10.42894895457397400 ) ) ; +#940 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#941 = VECTOR ( 'NONE', #238, 1000.000000000000000 ) ; +#942 = ORIENTED_EDGE ( 'NONE', *, *, #262, .F. ) ; +#943 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.499997531949971700, -7.834640608427718300 ) ) ; +#944 = EDGE_CURVE ( 'NONE', #3432, #1878, #1184, .T. ) ; +#945 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.17394646130280100, 20.00001676643945100 ) ) ; +#946 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999388300, -8.561776163818333200, -13.38134266248358800 ) ) ; +#947 = FACE_OUTER_BOUND ( 'NONE', #2511, .T. ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( 13.13647014698193900, -10.65557327688658700, -10.20145185049129000 ) ) ; +#949 = ORIENTED_EDGE ( 'NONE', *, *, #1583, .T. ) ; +#950 = AXIS2_PLACEMENT_3D ( 'NONE', #3450, #1292, #3799 ) ; +#951 = VERTEX_POINT ( 'NONE', #2614 ) ; +#952 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#953 = CYLINDRICAL_SURFACE ( 'NONE', #3371, 4.999999999999997300 ) ; +#954 = EDGE_CURVE ( 'NONE', #4229, #2432, #3224, .T. ) ; +#955 = CARTESIAN_POINT ( 'NONE', ( -4.214460232813172200, 7.499997531949969900, 8.154633239094820900 ) ) ; +#956 = ORIENTED_EDGE ( 'NONE', *, *, #3568, .F. ) ; +#957 = FACE_OUTER_BOUND ( 'NONE', #4105, .T. ) ; +#958 = CARTESIAN_POINT ( 'NONE', ( 5.223150528420450900, 20.43466303776799400, 70.00001676643944400 ) ) ; +#959 = ORIENTED_EDGE ( 'NONE', *, *, #412, .T. ) ; +#960 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#961 = CARTESIAN_POINT ( 'NONE', ( 2.761891817016613800, -11.59347004698750700, -4.688665399299803300 ) ) ; +#962 = CARTESIAN_POINT ( 'NONE', ( 13.52102488990382400, -12.69141347966977500, -9.095850374388549000 ) ) ; +#963 = ORIENTED_EDGE ( 'NONE', *, *, #3864, .T. ) ; +#964 = EDGE_CURVE ( 'NONE', #3559, #4701, #1179, .T. ) ; +#965 = CIRCLE ( 'NONE', #1570, 105.0000000000000100 ) ; +#966 = DIRECTION ( 'NONE', ( 0.2066963473393687000, 0.2933192593767608400, -0.9334026098502358200 ) ) ; +#967 = EDGE_CURVE ( 'NONE', #1381, #4280, #1148, .T. ) ; +#968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#969 = AXIS2_PLACEMENT_3D ( 'NONE', #434, #3062, #852 ) ; +#970 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1686, #4495, #2386, #53, #2738, #461, #3091, #886, #3455, #1299 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0008405965609519550100, 0.001681193121903910000, 0.002521789682855865100, 0.003362386243807820000 ), + .UNSPECIFIED. ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( 2.106326428968108300, -13.28583438189561900, -6.258494954741390600 ) ) ; +#972 = EDGE_CURVE ( 'NONE', #1004, #2627, #1132, .T. ) ; +#973 = CARTESIAN_POINT ( 'NONE', ( 13.39102018247900900, 24.09908452958432800, 69.36570928668105300 ) ) ; +#974 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 65.73015992574794100 ) ) ; +#975 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999800, 12.49999753194997300, 6.500016766439455500 ) ) ; +#976 = AXIS2_PLACEMENT_3D ( 'NONE', #2101, #4552, #2443 ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( -0.3792229269417209400, -11.48730390875625300, -5.997090840996685700 ) ) ; +#978 = CYLINDRICAL_SURFACE ( 'NONE', #668, 3.750000000000000000 ) ; +#979 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#980 = CIRCLE ( 'NONE', #3431, 5.000000000000004400 ) ; +#981 = EDGE_CURVE ( 'NONE', #2432, #355, #1137, .T. ) ; +#982 = VECTOR ( 'NONE', #4466, 1000.000000000000000 ) ; +#983 = CARTESIAN_POINT ( 'NONE', ( 0.9924482408871261300, 2.627288019610017200, -12.87978940825534300 ) ) ; +#984 = CYLINDRICAL_SURFACE ( 'NONE', #3401, 5.000000000000000000 ) ; +#985 = ADVANCED_FACE ( 'NONE', ( #1118 ), #1112, .T. ) ; +#986 = CARTESIAN_POINT ( 'NONE', ( -2.407180798393343300, 7.499997531949972500, -10.94602365035570200 ) ) ; +#987 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999999100, 19.98722159839779500, 70.00001676643945800 ) ) ; +#988 = FACE_OUTER_BOUND ( 'NONE', #1785, .T. ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( 11.67914778011991900, 22.06762794330472800, 69.17972513646169800 ) ) ; +#990 = ORIENTED_EDGE ( 'NONE', *, *, #3623, .T. ) ; +#991 = AXIS2_PLACEMENT_3D ( 'NONE', #2785, #960, #1373 ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( 1.325537971758612700, -12.53184784159610200, -9.627389943187862900 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( 4.325610695885160300, 21.00526717239642600, 69.96593655342985600 ) ) ; +#994 = CYLINDRICAL_SURFACE ( 'NONE', #3407, 2.500000000000000400 ) ; +#995 = EDGE_CURVE ( 'NONE', #2901, #3735, #1083, .T. ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -5.006327233685850000, -16.76436826747344400 ) ) ; +#997 = EDGE_LOOP ( 'NONE', ( #2061, #2100, #2112, #2123 ) ) ; +#998 = ADVANCED_FACE ( 'NONE', ( #1109 ), #1050, .T. ) ; +#999 = ORIENTED_EDGE ( 'NONE', *, *, #3331, .T. ) ; +#1000 = CARTESIAN_POINT ( 'NONE', ( 14.58577540507031500, -12.88535341793438400, 8.754247968551204900 ) ) ; +#1001 = ORIENTED_EDGE ( 'NONE', *, *, #1219, .F. ) ; +#1002 = EDGE_CURVE ( 'NONE', #4662, #42, #1058, .T. ) ; +#1003 = FACE_OUTER_BOUND ( 'NONE', #1195, .T. ) ; +#1004 = VERTEX_POINT ( 'NONE', #3719 ) ; +#1005 = VERTEX_POINT ( 'NONE', #1981 ) ; +#1006 = AXIS2_PLACEMENT_3D ( 'NONE', #3617, #4325, #2551 ) ; +#1007 = CARTESIAN_POINT ( 'NONE', ( 10.67438930411484000, 21.00526717239642200, 69.96593655342984200 ) ) ; +#1008 = CARTESIAN_POINT ( 'NONE', ( 15.04071486840556900, -8.848105169926984800, -13.18271470662454100 ) ) ; +#1009 = FACE_OUTER_BOUND ( 'NONE', #4763, .T. ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( 12.12420470556011100, -13.66053118815359100, -11.65739457391244800 ) ) ; +#1011 = EDGE_CURVE ( 'NONE', #4659, #108, #1054, .T. ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( 4.654491006451324100, 20.75336956103899100, 69.46575892129568800 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( 2.675508044430303200, 21.65305195732290900, 69.60900000557700200 ) ) ; +#1014 = ORIENTED_EDGE ( 'NONE', *, *, #3386, .T. ) ; +#1015 = ADVANCED_FACE ( 'NONE', ( #1046 ), #994, .T. ) ; +#1016 = CARTESIAN_POINT ( 'NONE', ( -2.705324332214545300, 6.981645602646671600, -10.58825140976957100 ) ) ; +#1017 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949969000, 12.50001676643945100 ) ) ; +#1018 = AXIS2_PLACEMENT_3D ( 'NONE', #1641, #2697, #413 ) ; +#1019 = ORIENTED_EDGE ( 'NONE', *, *, #2907, .T. ) ; +#1020 = EDGE_CURVE ( 'NONE', #4001, #4302, #1585, .T. ) ; +#1021 = FACE_OUTER_BOUND ( 'NONE', #4216, .T. ) ; +#1022 = CARTESIAN_POINT ( 'NONE', ( 13.99999999049875900, -10.72938871179268000, 10.37940545817927100 ) ) ; +#1023 = ADVANCED_FACE ( 'NONE', ( #988 ), #984, .F. ) ; +#1024 = EDGE_LOOP ( 'NONE', ( #2858, #2867 ) ) ; +#1025 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999999100, 9.999997531949972500, -14.99998323356054400 ) ) ; +#1026 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2593, #1901, #1523, #296, #2943, #712, #3314, #1124, #3658, #1546, #4021, #1916 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0003697230435032897000, 0.0007394460870065794000, 0.001478892174013154700, 0.002218338261019730000, 0.002957784348026304600 ), + .UNSPECIFIED. ) ; +#1027 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.559374635020935500E-016 ) ) ; +#1028 = VECTOR ( 'NONE', #3010, 1000.000000000000200 ) ; +#1029 = CARTESIAN_POINT ( 'NONE', ( 2.290854508055746800, 22.24202922492520400, 69.52193398097848800 ) ) ; +#1030 = CARTESIAN_POINT ( 'NONE', ( 14.57920211477183200, -11.15616476789789300, -12.54601584137742500 ) ) ; +#1031 = ADVANCED_FACE ( 'NONE', ( #1068 ), #953, .T. ) ; +#1032 = PLANE ( 'NONE', #2509 ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( 2.398399999999996500, 24.60506120046983400, 68.99053988707966300 ) ) ; +#1034 = EDGE_CURVE ( 'NONE', #4356, #1341, #629, .T. ) ; +#1035 = CARTESIAN_POINT ( 'NONE', ( -0.7210682438478467300, 5.129270421443392200, -12.11357236457993900 ) ) ; +#1036 = CARTESIAN_POINT ( 'NONE', ( 1.122315130336655200, -13.26138971684057400, 3.817909365877728800 ) ) ; +#1037 = EDGE_CURVE ( 'NONE', #4229, #4302, #980, .T. ) ; +#1038 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4683, #3312, #2261, #4700, #2605, #319, #2961, #729, #3329, #1147, #3675, #1560 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001328901028899563000, 0.002657802057799126100, 0.003322252572248907900, 0.003986703086698689300, 0.005315604115598254700 ), + .UNSPECIFIED. ) ; +#1039 = CARTESIAN_POINT ( 'NONE', ( 3.252212143073838700, 6.753625306780541800, -10.46278576264299400 ) ) ; +#1040 = CC_DESIGN_APPROVAL ( #4728, ( #4279 ) ) ; +#1041 = CARTESIAN_POINT ( 'NONE', ( -23.17814422013855600, 12.49999753194997400, 15.05876841914304100 ) ) ; +#1042 = AXIS2_PLACEMENT_3D ( 'NONE', #4117, #2016, #4474 ) ; +#1043 = CARTESIAN_POINT ( 'NONE', ( 1.528982752336969500, 7.499997531949971700, -7.899448856067614600 ) ) ; +#1044 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1045 = ADVANCED_FACE ( 'NONE', ( #1009 ), #4395, .T. ) ; +#1046 = FACE_OUTER_BOUND ( 'NONE', #997, .T. ) ; +#1047 = EDGE_CURVE ( 'NONE', #4302, #4177, #3583, .T. ) ; +#1048 = CIRCLE ( 'NONE', #2886, 6.000000000000000000 ) ; +#1049 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1050 = CYLINDRICAL_SURFACE ( 'NONE', #3440, 25.00000000000000000 ) ; +#1051 = ADVANCED_FACE ( 'NONE', ( #947 ), #921, .F. ) ; +#1052 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 8.356114789755134000, -7.485159283662422800 ) ) ; +#1053 = CARTESIAN_POINT ( 'NONE', ( 14.03724238101767000, 3.039434934234454200, -12.80979051882044400 ) ) ; +#1054 = CIRCLE ( 'NONE', #3457, 4.999999999999997300 ) ; +#1055 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1056 = ADVANCED_FACE ( 'NONE', ( #1003 ), #889, .F. ) ; +#1057 = CARTESIAN_POINT ( 'NONE', ( -25.19174207655504500, 12.49999753194996900, 17.50001676643945100 ) ) ; +#1058 = LINE ( 'NONE', #3380, #1075 ) ; +#1059 = CARTESIAN_POINT ( 'NONE', ( 15.08685551380657800, -11.00706076283309500, -8.885634781971939200 ) ) ; +#1060 = DIRECTION ( 'NONE', ( -1.368455531567204200E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1061 = ORIENTED_EDGE ( 'NONE', *, *, #1167, .F. ) ; +#1062 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -6.631762177429775000, 7.500016766439451900 ) ) ; +#1063 = ORIENTED_EDGE ( 'NONE', *, *, #1356, .F. ) ; +#1064 = EDGE_CURVE ( 'NONE', #1324, #3370, #925, .T. ) ; +#1065 = ORIENTED_EDGE ( 'NONE', *, *, #1645, .F. ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( 15.23618257386735700, -11.63176217742976900, -0.01219551856327478500 ) ) ; +#1067 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4285, #2508, #208, #2879, #1218, #3731, #1629, #4095 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 1.135331919094598300E-019, 0.002162201505156869800, 0.003243302257735303100, 0.004324403010313736100 ), + .UNSPECIFIED. ) ; +#1068 = FACE_OUTER_BOUND ( 'NONE', #2570, .T. ) ; +#1069 = EDGE_CURVE ( 'NONE', #42, #3559, #930, .T. ) ; +#1070 = ADVANCED_FACE ( 'NONE', ( #919 ), #856, .T. ) ; +#1071 = VERTEX_POINT ( 'NONE', #4324 ) ; +#1072 = ORIENTED_EDGE ( 'NONE', *, *, #2665, .T. ) ; +#1073 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.7841066466666031200, -0.6206261085816926500 ) ) ; +#1074 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.499997531949971700, -7.834640608427718300 ) ) ; +#1075 = VECTOR ( 'NONE', #787, 1000.000000000000000 ) ; +#1076 = CARTESIAN_POINT ( 'NONE', ( 2.137379084328280100, -13.24037709905325100, -12.07646036234387700 ) ) ; +#1077 = ORIENTED_EDGE ( 'NONE', *, *, #4512, .T. ) ; +#1078 = ADVANCED_FACE ( 'NONE', ( #860 ), #2561, .F. ) ; +#1079 = EDGE_LOOP ( 'NONE', ( #3843, #3850, #3855, #3859 ) ) ; +#1080 = EDGE_CURVE ( 'NONE', #2432, #4177, #867, .T. ) ; +#1081 = CARTESIAN_POINT ( 'NONE', ( 12.94348556464784200, -13.23915273946482400, -6.542307750009860500 ) ) ; +#1082 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949971700, -12.49998323356054500 ) ) ; +#1083 = CIRCLE ( 'NONE', #3522, 5.101600000000001200 ) ; +#1084 = AXIS2_PLACEMENT_3D ( 'NONE', #382, #4755, #2663 ) ; +#1085 = DATE_AND_TIME ( #2111, #3867 ) ; +#1086 = EDGE_LOOP ( 'NONE', ( #4446, #300, #4232, #4347 ) ) ; +#1087 = CIRCLE ( 'NONE', #1997, 1.000000000000000900 ) ; +#1088 = EDGE_CURVE ( 'NONE', #4177, #748, #882, .T. ) ; +#1089 = CARTESIAN_POINT ( 'NONE', ( 14.35034572648714900, -13.11737994431847400, 7.415429138009333300 ) ) ; +#1090 = ORIENTED_EDGE ( 'NONE', *, *, #2441, .T. ) ; +#1091 = CARTESIAN_POINT ( 'NONE', ( 1.486667396080287900, -11.63176217742977900, 7.783362192658257700 ) ) ; +#1092 = VERTEX_POINT ( 'NONE', #3277 ) ; +#1093 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1094 = LINE ( 'NONE', #3482, #1290 ) ; +#1095 = CARTESIAN_POINT ( 'NONE', ( 12.23963093531955700, -11.60738276217908700, -4.417314027016407100 ) ) ; +#1096 = ADVANCED_FACE ( 'NONE', ( #876 ), #797, .T. ) ; +#1097 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000200, -8.796636784045349000, -13.21841860396793900 ) ) ; +#1098 = EDGE_CURVE ( 'NONE', #3467, #3016, #818, .T. ) ; +#1099 = EDGE_CURVE ( 'NONE', #355, #748, #805, .T. ) ; +#1100 = CARTESIAN_POINT ( 'NONE', ( 9.776849471579547300, 20.43466303776799400, 69.50001676643945800 ) ) ; +#1101 = ADVANCED_FACE ( 'NONE', ( #814 ), #789, .T. ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( 9.776849471579547300, 20.43466303776799400, 69.50001676643945800 ) ) ; +#1103 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 2.499997531949969000, 13.50001676643945100 ) ) ; +#1104 = EDGE_CURVE ( 'NONE', #3184, #3713, #756, .T. ) ; +#1105 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1106 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1107 = EDGE_CURVE ( 'NONE', #748, #120, #1038, .T. ) ; +#1108 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #3293 ) ; +#1109 = FACE_OUTER_BOUND ( 'NONE', #4225, .T. ) ; +#1110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1111 = LINE ( 'NONE', #2705, #784 ) ; +#1112 = SPHERICAL_SURFACE ( 'NONE', #3497, 5.000000000000000000 ) ; +#1113 = EDGE_CURVE ( 'NONE', #4378, #120, #742, .T. ) ; +#1114 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1115 = AXIS2_PLACEMENT_3D ( 'NONE', #4461, #2342, #7 ) ; +#1116 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1117 = CARTESIAN_POINT ( 'NONE', ( 14.60700223679622100, 4.715753562568966800, 11.99418156910905600 ) ) ; +#1118 = FACE_OUTER_BOUND ( 'NONE', #1536, .T. ) ; +#1119 = ADVANCED_FACE ( 'NONE', ( #792 ), #722, .F. ) ; +#1120 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1121 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1122 = ORIENTED_EDGE ( 'NONE', *, *, #3805, .F. ) ; +#1123 = EDGE_CURVE ( 'NONE', #3390, #3750, #731, .T. ) ; +#1124 = CARTESIAN_POINT ( 'NONE', ( 12.67512830648050900, 6.923500718382390700, -10.17097070554287300 ) ) ; +#1125 = VECTOR ( 'NONE', #1584, 1000.000000000000000 ) ; +#1126 = EDGE_CURVE ( 'NONE', #901, #1581, #737, .T. ) ; +#1127 = APPROVAL_ROLE ( '' ) ; +#1128 = EDGE_LOOP ( 'NONE', ( #4507, #4546, #4560 ) ) ; +#1129 = ADVANCED_FACE ( 'NONE', ( #681 ), #3690, .F. ) ; +#1130 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 9.099997531949975700, -4.999983233560542800 ) ) ; +#1131 = CARTESIAN_POINT ( 'NONE', ( -0.08845176940076097900, -11.23056746661599100, 9.496250446701042200 ) ) ; +#1132 = CIRCLE ( 'NONE', #3576, 1.000000000000000000 ) ; +#1133 = VERTEX_POINT ( 'NONE', #3354 ) ; +#1134 = VERTEX_POINT ( 'NONE', #4729 ) ; +#1135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1355, #2425, #1743, #3858, #1752, #4208 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.005426143550952946900, 0.01085228710190589400 ), + .UNSPECIFIED. ) ; +#1136 = DIRECTION ( 'NONE', ( -1.301042606982606500E-015, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1137 = CIRCLE ( 'NONE', #3547, 7.500000000000000000 ) ; +#1138 = EDGE_CURVE ( 'NONE', #1976, #2850, #733, .T. ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 7.597114959037287300, -10.99998323356054700 ) ) ; +#1140 = ORIENTED_EDGE ( 'NONE', *, *, #2907, .F. ) ; +#1141 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000500, -7.748050051366713700, 15.24714257638364100 ) ) ; +#1142 = CARTESIAN_POINT ( 'NONE', ( 16.66236046510519800, 6.292552620607502000, 10.83765630133345300 ) ) ; +#1143 = ORIENTED_EDGE ( 'NONE', *, *, #2214, .T. ) ; +#1144 = EDGE_CURVE ( 'NONE', #120, #2968, #77, .T. ) ; +#1145 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.25516839058982700, 65.66925009504865300 ) ) ; +#1146 = CARTESIAN_POINT ( 'NONE', ( 15.00074563273114900, 2.753360650686741200, -12.85714365836045500 ) ) ; +#1147 = CARTESIAN_POINT ( 'NONE', ( 11.74067028187532300, 21.03723834632023000, 69.73961085663513900 ) ) ; +#1148 = LINE ( 'NONE', #1169, #1125 ) ; +#1149 = VERTEX_POINT ( 'NONE', #1177 ) ; +#1150 = EDGE_CURVE ( 'NONE', #4177, #3735, #785, .T. ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( 13.48027658118971700, -11.63176217742977600, 7.500016766439451000 ) ) ; +#1152 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ; +#1153 = ADVANCED_FACE ( 'NONE', ( #665 ), #616, .F. ) ; +#1154 = DIRECTION ( 'NONE', ( -9.912705577010325500E-017, 1.982541115402065100E-016, -1.000000000000000000 ) ) ; +#1155 = ORIENTED_EDGE ( 'NONE', *, *, #1744, .F. ) ; +#1156 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 22.04683779771033500, 65.14652186846588200 ) ) ; +#1157 = EDGE_CURVE ( 'NONE', #2306, #4302, #624, .T. ) ; +#1158 = ADVANCED_FACE ( 'NONE', ( #660 ), #600, .F. ) ; +#1159 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -6.631762177429775000, 13.50001676643945100 ) ) ; +#1160 = CIRCLE ( 'NONE', #1853, 1.000000000000000000 ) ; +#1161 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000700, 7.499997531949969000, 7.500016766439441300 ) ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( -3.509924329453289500E-014, 22.38427192120808200, 68.34637720887998600 ) ) ; +#1163 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#1164 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 23.51760405021332200, 65.50821708524635800 ) ) ; +#1165 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3241, #639, #1053, #3600 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0006284640147730978000 ), + .UNSPECIFIED. ) ; +#1166 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1167 = EDGE_CURVE ( 'NONE', #3256, #3411, #603, .T. ) ; +#1168 = EDGE_CURVE ( 'NONE', #2840, #4001, #684, .T. ) ; +#1169 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 7.499997531949976100, -14.99998323356054400 ) ) ; +#1170 = VECTOR ( 'NONE', #4709, 1000.000000000000000 ) ; +#1171 = CARTESIAN_POINT ( 'NONE', ( 1.519723418810282200, -11.63176217742977600, 7.500016766439451000 ) ) ; +#1172 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 22.41348293448504600, 65.22793614700349000 ) ) ; +#1173 = AXIS2_PLACEMENT_3D ( 'NONE', #1296, #881, #1682 ) ; +#1174 = ADVANCED_FACE ( 'NONE', ( #676 ), #553, .F. ) ; +#1175 = CARTESIAN_POINT ( 'NONE', ( 3.748984277178503400, 20.77228515518913500, 69.85267090532337900 ) ) ; +#1176 = CARTESIAN_POINT ( 'NONE', ( -0.1439831196136876800, 3.830332587471299000, -13.66186086489363300 ) ) ; +#1177 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.131762177429775900, -14.20299705715771100 ) ) ; +#1178 = CIRCLE ( 'NONE', #2416, 4.999999999999999100 ) ; +#1179 = LINE ( 'NONE', #2981, #1170 ) ; +#1180 = EDGE_CURVE ( 'NONE', #748, #2901, #561, .T. ) ; +#1181 = CARTESIAN_POINT ( 'NONE', ( 12.28157700191134800, -11.63176217742977400, -3.562168356210498200 ) ) ; +#1182 = CARTESIAN_POINT ( 'NONE', ( 11.25101572282751800, 20.77228515518929100, 69.85267090532185800 ) ) ; +#1183 = ADVANCED_FACE ( 'NONE', ( #610 ), #538, .F. ) ; +#1184 = LINE ( 'NONE', #2270, #1193 ) ; +#1185 = CARTESIAN_POINT ( 'NONE', ( 14.00251830845541800, 2.527059315175691300, -12.89746243308857000 ) ) ; +#1186 = CARTESIAN_POINT ( 'NONE', ( 11.19000126172980500, 21.45558295164893900, 69.28022171500831000 ) ) ; +#1187 = EDGE_CURVE ( 'NONE', #3395, #2968, #544, .T. ) ; +#1188 = FACE_OUTER_BOUND ( 'NONE', #4752, .T. ) ; +#1189 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1190 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1784, #3885, #3797, #1698 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.342834650096389400E-019, 0.0005058054946803306700 ), + .UNSPECIFIED. ) ; +#1191 = ORIENTED_EDGE ( 'NONE', *, *, #1973, .T. ) ; +#1192 = CARTESIAN_POINT ( 'NONE', ( 38.81274531696695400, 12.49999753194997100, 15.30943585139485000 ) ) ; +#1193 = VECTOR ( 'NONE', #4376, 1000.000000000000000 ) ; +#1194 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#1195 = EDGE_LOOP ( 'NONE', ( #4173, #3584, #682, #4220 ) ) ; +#1196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1197 = ORIENTED_EDGE ( 'NONE', *, *, #3623, .F. ) ; +#1198 = CARTESIAN_POINT ( 'NONE', ( 12.23959909045685100, -11.60732199874113100, -4.418740668444139700 ) ) ; +#1199 = VECTOR ( 'NONE', #1114, 1000.000000000000000 ) ; +#1200 = ORIENTED_EDGE ( 'NONE', *, *, #30, .F. ) ; +#1201 = EDGE_LOOP ( 'NONE', ( #3087, #3115, #3121, #3127 ) ) ; +#1202 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1203 = FACE_BOUND ( 'NONE', #1024, .T. ) ; +#1204 = ORIENTED_EDGE ( 'NONE', *, *, #1034, .T. ) ; +#1205 = EDGE_LOOP ( 'NONE', ( #3485, #3517, #3527, #3536 ) ) ; +#1206 = EDGE_CURVE ( 'NONE', #4701, #4036, #3236, .T. ) ; +#1207 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1208 = ADVANCED_FACE ( 'NONE', ( #532 ), #4058, .T. ) ; +#1209 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122081300, 0.1736481776669295800 ) ) ; +#1210 = LOCAL_TIME ( 15, 8, 41.00000000000000000, #2215 ) ; +#1211 = VERTEX_POINT ( 'NONE', #39 ) ; +#1212 = EDGE_CURVE ( 'NONE', #120, #320, #587, .T. ) ; +#1213 = DIRECTION ( 'NONE', ( -0.9888447541710943000, 0.1489498309777767800, 0.0000000000000000000 ) ) ; +#1214 = FACE_OUTER_BOUND ( 'NONE', #3514, .T. ) ; +#1215 = AXIS2_PLACEMENT_3D ( 'NONE', #857, #2040, #2736 ) ; +#1216 = ORIENTED_EDGE ( 'NONE', *, *, #4620, .F. ) ; +#1217 = CARTESIAN_POINT ( 'NONE', ( 14.73593039847261500, -10.74054110417901800, -12.99755055885602500 ) ) ; +#1218 = CARTESIAN_POINT ( 'NONE', ( 0.4003048296298785100, -12.86521061690298000, 8.817918350937551600 ) ) ; +#1219 = EDGE_CURVE ( 'NONE', #3411, #4022, #2421, .T. ) ; +#1220 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1221 = ORIENTED_EDGE ( 'NONE', *, *, #1744, .T. ) ; +#1222 = VECTOR ( 'NONE', #1995, 1000.000000000000000 ) ; +#1223 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -8.189983233560536000 ) ) ; +#1224 = EDGE_CURVE ( 'NONE', #4022, #1707, #2693, .T. ) ; +#1225 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 7.499997531949971700, -9.999983233560547200 ) ) ; +#1226 = CARTESIAN_POINT ( 'NONE', ( 13.36589636181888500, -13.37103237191161900, 0.2523370407778334800 ) ) ; +#1227 = ADVANCED_FACE ( 'NONE', ( #594 ), #473, .T. ) ; +#1228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.7841066466666024600, -0.6206261085816935400 ) ) ; +#1230 = DIRECTION ( 'NONE', ( 0.4463010568409033200, 0.8948828787403929600, 0.0000000000000000000 ) ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 8.489810784768483400, -7.485159283662421900 ) ) ; +#1232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.559374635020935700E-016 ) ) ; +#1233 = ADVANCED_FACE ( 'NONE', ( #489 ), #11, .T. ) ; +#1234 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1235 = EDGE_CURVE ( 'NONE', #4358, #2210, #465, .T. ) ; +#1236 = CIRCLE ( 'NONE', #3601, 1.000000000000000900 ) ; +#1237 = EDGE_CURVE ( 'NONE', #3713, #1707, #469, .T. ) ; +#1238 = LINE ( 'NONE', #3738, #2182 ) ; +#1239 = VECTOR ( 'NONE', #4680, 1000.000000000000000 ) ; +#1240 = CARTESIAN_POINT ( 'NONE', ( 0.01794865491074211900, -9.614316324122370400, -15.96730123019692400 ) ) ; +#1241 = AXIS2_PLACEMENT_3D ( 'NONE', #1724, #4174, #2071 ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( -0.002098590391248755200, 2.667255832933164200, -13.88227018605011100 ) ) ; +#1243 = CARTESIAN_POINT ( 'NONE', ( 2.689997214450257100, -12.63176217742977400, -3.277205641478954300 ) ) ; +#1244 = CARTESIAN_POINT ( 'NONE', ( -1.486905836551548500E-015, -9.186988295993384000, 17.33277459440502000 ) ) ; +#1245 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, -9.186988295993382200, 20.00001676643945100 ) ) ; +#1246 = LINE ( 'NONE', #1908, #1199 ) ; +#1247 = CARTESIAN_POINT ( 'NONE', ( 3.144026474157878900, 7.067293708092082100, -9.943020462385320000 ) ) ; +#1248 = EDGE_LOOP ( 'NONE', ( #1882, #1266, #2525, #2042, #3474, #2573, #160 ) ) ; +#1249 = CARTESIAN_POINT ( 'NONE', ( 12.36876677497678800, 8.097341614727115600, -9.499328188837370800 ) ) ; +#1250 = AXIS2_PLACEMENT_3D ( 'NONE', #4494, #2384, #50 ) ; +#1251 = LINE ( 'NONE', #284, #1239 ) ; +#1252 = CARTESIAN_POINT ( 'NONE', ( 13.06766588139503700, -10.73463500113415100, -9.914337676050291000 ) ) ; +#1253 = ORIENTED_EDGE ( 'NONE', *, *, #4389, .T. ) ; +#1254 = EDGE_CURVE ( 'NONE', #3076, #3432, #536, .T. ) ; +#1255 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -6.631762177429775000, 7.500016766439451900 ) ) ; +#1256 = VECTOR ( 'NONE', #1424, 1000.000000000000000 ) ; +#1257 = CARTESIAN_POINT ( 'NONE', ( 13.49615099817005500, 7.499997531949971700, -7.843247238070243400 ) ) ; +#1258 = ORIENTED_EDGE ( 'NONE', *, *, #4042, .T. ) ; +#1259 = ADVANCED_FACE ( 'NONE', ( #426 ), #4341, .T. ) ; +#1260 = CARTESIAN_POINT ( 'NONE', ( 15.11986063814925900, 5.423856986062923500, -11.90142340997022800 ) ) ; +#1261 = EDGE_LOOP ( 'NONE', ( #3454, #4613, #4051, #3473, #4648, #4062, #3512, #4661, #4109, #3529, #4705, #4130, #3567, #4742 ) ) ; +#1262 = CARTESIAN_POINT ( 'NONE', ( 13.42465141229448200, 7.499997531949971700, -8.003269003333327800 ) ) ; +#1263 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1264 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -8.187874067871446100, 15.49217928780325700 ) ) ; +#1265 = CIRCLE ( 'NONE', #3638, 0.9999999999999991100 ) ; +#1266 = ORIENTED_EDGE ( 'NONE', *, *, #1649, .T. ) ; +#1267 = ORIENTED_EDGE ( 'NONE', *, *, #210, .F. ) ; +#1268 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 1.002418334253397700E-015, 12.50001676643945100 ) ) ; +#1269 = CARTESIAN_POINT ( 'NONE', ( 1.985835979205081300, 7.054338904805040200, -9.899838198177024000 ) ) ; +#1270 = FACE_OUTER_BOUND ( 'NONE', #3872, .T. ) ; +#1271 = LINE ( 'NONE', #3558, #1256 ) ; +#1272 = AXIS2_PLACEMENT_3D ( 'NONE', #4569, #1758, #4211 ) ; +#1273 = CARTESIAN_POINT ( 'NONE', ( 12.28329307768217400, 7.183565969155620400, -9.660621702552376200 ) ) ; +#1274 = EDGE_LOOP ( 'NONE', ( #3302, #3342, #3349, #3410, #3507, #3577, #3634 ) ) ; +#1275 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1276 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 7.499997531949971700, -2.514807183458669800 ) ) ; +#1277 = EDGE_CURVE ( 'NONE', #3177, #2055, #414, .T. ) ; +#1278 = CYLINDRICAL_SURFACE ( 'NONE', #841, 5.000000000000000000 ) ; +#1279 = CARTESIAN_POINT ( 'NONE', ( 13.49999999999999800, 2.499997531949971200, -7.834640608427718300 ) ) ; +#1280 = ORIENTED_EDGE ( 'NONE', *, *, #1483, .T. ) ; +#1281 = AXIS2_PLACEMENT_3D ( 'NONE', #2006, #4465, #2348 ) ; +#1282 = CARTESIAN_POINT ( 'NONE', ( 2.624348049555129700, 8.101834264856400100, -9.498859287716580700 ) ) ; +#1283 = CARTESIAN_POINT ( 'NONE', ( 18.81574792242821200, 7.393692747905958200, -9.255743101512598200 ) ) ; +#1284 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1285 = EDGE_CURVE ( 'NONE', #1707, #1716, #4002, .T. ) ; +#1286 = CARTESIAN_POINT ( 'NONE', ( -3.170441246634904900E-016, 5.428929720084492600, 13.50001676643945100 ) ) ; +#1287 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .T. ) ; +#1288 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999999600, 7.499997531949971700, 6.500016766439454600 ) ) ; +#1289 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.81553106438243700, 65.73015992760650800 ) ) ; +#1290 = VECTOR ( 'NONE', #1371, 1000.000000000000000 ) ; +#1291 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 9.999997531949972500, -14.99998323356054400 ) ) ; +#1292 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1293 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 8.333227077737452900, -9.132598159693362300 ) ) ; +#1294 = CARTESIAN_POINT ( 'NONE', ( 11.77500276737383100, 6.747595392398407600, -10.47242612205726100 ) ) ; +#1295 = EDGE_CURVE ( 'NONE', #1716, #2679, #459, .T. ) ; +#1296 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -4.999983233560542800 ) ) ; +#1297 = CARTESIAN_POINT ( 'NONE', ( 1.165417648256161800, -12.34049684824547000, -10.17982295743313500 ) ) ; +#1298 = AXIS2_PLACEMENT_3D ( 'NONE', #385, #3018, #800 ) ; +#1299 = CARTESIAN_POINT ( 'NONE', ( 13.48027658118971700, -11.63176217742977600, 7.500016766439451000 ) ) ; +#1300 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1301 = EDGE_CURVE ( 'NONE', #3418, #1702, #396, .T. ) ; +#1302 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1303 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 2.499997531949970300, 2.891202939038461700E-016 ) ) ; +#1304 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2462, #4574, #555, #3166, #971, #3533, #1389, #3888, #1789, #4233 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 2.602085213965210600E-018, 0.001755296121277027900, 0.003510592242554053100, 0.005265888363831078800, 0.007021184485108103600 ), + .UNSPECIFIED. ) ; +#1305 = LINE ( 'NONE', #4448, #982 ) ; +#1306 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122082400, 0.1736481776669294400 ) ) ; +#1307 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.5699860136114663900, 0.8216543946741290400 ) ) ; +#1308 = VECTOR ( 'NONE', #3906, 1000.000000000000000 ) ; +#1309 = DIRECTION ( 'NONE', ( -1.899659574041325700E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( 2.769305980882383900, -11.61246849402522600, -4.408986361813624900 ) ) ; +#1311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1312 = FACE_OUTER_BOUND ( 'NONE', #2954, .T. ) ; +#1313 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1314 = LINE ( 'NONE', #1802, #1308 ) ; +#1315 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 12.49999753194997600, -14.99998323356054400 ) ) ; +#1316 = EDGE_CURVE ( 'NONE', #4303, #3732, #2358, .T. ) ; +#1317 = FACE_OUTER_BOUND ( 'NONE', #3340, .T. ) ; +#1318 = EDGE_CURVE ( 'NONE', #2679, #1329, #397, .T. ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( 12.50000000000000000, 8.330649798345382000, -9.139106643412565800 ) ) ; +#1320 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.55293979002667700, 65.00001676643944400 ) ) ; +#1321 = FACE_BOUND ( 'NONE', #3692, .T. ) ; +#1322 = AXIS2_PLACEMENT_3D ( 'NONE', #2291, #370, #3002 ) ; +#1323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1324 = VERTEX_POINT ( 'NONE', #2690 ) ; +#1325 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -6.631762177429775000, 12.50001676643945100 ) ) ; +#1326 = CARTESIAN_POINT ( 'NONE', ( 2.757517116773847000, 23.08009326926301300, 69.06491244352778800 ) ) ; +#1327 = CIRCLE ( 'NONE', #3659, 6.000000000000000000 ) ; +#1328 = CARTESIAN_POINT ( 'NONE', ( 1.660067810720148800, -10.39883856062376900, -11.03625087443143600 ) ) ; +#1329 = VERTEX_POINT ( 'NONE', #846 ) ; +#1330 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2395, #4505, #2751, #470, #3096, #895, #3466, #1310, #3819, #1718 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001702747372360124800, 0.003405494744720247100, 0.005108242117080369500, 0.006810989489440491500 ), + .UNSPECIFIED. ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( 0.4019317395912918000, -11.11347783908488100, -12.59816825639631500 ) ) ; +#1332 = ORIENTED_EDGE ( 'NONE', *, *, #463, .F. ) ; +#1333 = AXIS2_PLACEMENT_3D ( 'NONE', #4040, #4734, #2646 ) ; +#1334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1335 = CYLINDRICAL_SURFACE ( 'NONE', #3748, 1.200000000000005700 ) ; +#1336 = VERTEX_POINT ( 'NONE', #1262 ) ; +#1337 = EDGE_CURVE ( 'NONE', #1480, #1887, #393, .T. ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( 0.6935566269318452800, 4.111075824982011200, 12.24464728888265200 ) ) ; +#1339 = ORIENTED_EDGE ( 'NONE', *, *, #2992, .F. ) ; +#1340 = CIRCLE ( 'NONE', #3776, 2.499999999999998700 ) ; +#1341 = VERTEX_POINT ( 'NONE', #3430 ) ; +#1342 = CARTESIAN_POINT ( 'NONE', ( 13.48027658118971700, -11.63176217742977600, 7.500016766439451000 ) ) ; +#1343 = APPROVAL_DATE_TIME ( #239, #4129 ) ; +#1344 = VERTEX_POINT ( 'NONE', #2725 ) ; +#1345 = CARTESIAN_POINT ( 'NONE', ( -0.05582679959295315500, -9.753139636283718200, -12.24378699178216600 ) ) ; +#1346 = EDGE_CURVE ( 'NONE', #4716, #502, #365, .T. ) ; +#1347 = ADVANCED_FACE ( 'NONE', ( #401, #347, #357, #351 ), #447, .F. ) ; +#1348 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1349 = ORIENTED_EDGE ( 'NONE', *, *, #1483, .F. ) ; +#1350 = EDGE_CURVE ( 'NONE', #2577, #3750, #332, .T. ) ; +#1351 = AXIS2_PLACEMENT_3D ( 'NONE', #1978, #4433, #2324 ) ; +#1352 = CARTESIAN_POINT ( 'NONE', ( -1.927266398697163400, 6.498331742512603700, 11.18729708800296100 ) ) ; +#1353 = AXIS2_PLACEMENT_3D ( 'NONE', #1975, #4429, #2321 ) ; +#1354 = ORIENTED_EDGE ( 'NONE', *, *, #4422, .F. ) ; +#1355 = CARTESIAN_POINT ( 'NONE', ( 0.6496542735128673100, -13.11737994431847900, 7.415429138009334200 ) ) ; +#1356 = EDGE_CURVE ( 'NONE', #2577, #3390, #336, .T. ) ; +#1357 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999994700, 26.77590825245414800, 41.25001676643945100 ) ) ; +#1358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1359 = ADVANCED_FACE ( 'NONE', ( #342 ), #276, .F. ) ; +#1360 = AXIS2_PLACEMENT_3D ( 'NONE', #755, #1579, #4052 ) ; +#1361 = CARTESIAN_POINT ( 'NONE', ( -0.4233631808746850000, -11.63176217742977600, -3.575826722854610600 ) ) ; +#1362 = CARTESIAN_POINT ( 'NONE', ( -6.114900252818245000E-014, -9.131762177429809700, -14.20299705715771500 ) ) ; +#1363 = CARTESIAN_POINT ( 'NONE', ( 13.92058774224425300, -12.23771653562962500, -10.47842190402487700 ) ) ; +#1364 = EDGE_CURVE ( 'NONE', #4122, #108, #282, .T. ) ; +#1365 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000009800, 7.499997531949969000, 7.500016766439443000 ) ) ; +#1366 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #150, #3891, #576, #261 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009772193614486486600 ), + .UNSPECIFIED. ) ; +#1367 = CIRCLE ( 'NONE', #775, 5.000000000000000900 ) ; +#1368 = CIRCLE ( 'NONE', #3688, 1.000000000000000000 ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.711846095760980000, -9.273070689112936200 ) ) ; +#1370 = CARTESIAN_POINT ( 'NONE', ( 12.60160000000000100, 24.99999753195004400, 68.99053987906759700 ) ) ; +#1371 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1372 = EDGE_CURVE ( 'NONE', #3808, #3467, #1844, .T. ) ; +#1373 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1374 = CIRCLE ( 'NONE', #3644, 1.000000000000000000 ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( 2.202364771340829600, -13.41957246329656400, -4.789417387034136600 ) ) ; +#1376 = CARTESIAN_POINT ( 'NONE', ( 13.10110019631337500, -13.09156950809768600, -7.435660880165336600 ) ) ; +#1377 = EDGE_CURVE ( 'NONE', #4122, #4659, #305, .T. ) ; +#1378 = VECTOR ( 'NONE', #3053, 1000.000000000000000 ) ; +#1379 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1380 = EDGE_CURVE ( 'NONE', #1341, #3364, #273, .T. ) ; +#1381 = VERTEX_POINT ( 'NONE', #85 ) ; +#1382 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 2.281796137159581800, -12.94070894874711200 ) ) ; +#1383 = CARTESIAN_POINT ( 'NONE', ( 13.48027658118971700, -11.63176217742977600, 7.500016766439451000 ) ) ; +#1384 = LINE ( 'NONE', #1566, #1378 ) ; +#1385 = EDGE_CURVE ( 'NONE', #3952, #4358, #226, .T. ) ; +#1386 = AXIS2_PLACEMENT_3D ( 'NONE', #3721, #1999, #4452 ) ; +#1387 = CARTESIAN_POINT ( 'NONE', ( -1.888616958072015400, 7.499997531949970800, -10.42745981003437100 ) ) ; +#1388 = ORIENTED_EDGE ( 'NONE', *, *, #463, .T. ) ; +#1389 = CARTESIAN_POINT ( 'NONE', ( 1.771515971767383800, -12.97724726904044500, -7.977570912629192700 ) ) ; +#1390 = AXIS2_PLACEMENT_3D ( 'NONE', #656, #3263, #1073 ) ; +#1391 = CARTESIAN_POINT ( 'NONE', ( 12.39842879763615700, 23.52682872572571800, 70.12289997740340700 ) ) ; +#1392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1394 = ORIENTED_EDGE ( 'NONE', *, *, #1502, .F. ) ; +#1395 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1396 = ORIENTED_EDGE ( 'NONE', *, *, #441, .T. ) ; +#1397 = EDGE_CURVE ( 'NONE', #3476, #1134, #298, .T. ) ; +#1398 = CARTESIAN_POINT ( 'NONE', ( 2.529026963162943200, -11.32844559868554600, -7.200004051063396900 ) ) ; +#1399 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, 24.99999753194998300, 60.10161676643944900 ) ) ; +#1400 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1401 = CIRCLE ( 'NONE', #3878, 3.189999999999994200 ) ; +#1402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1403 = EDGE_LOOP ( 'NONE', ( #3729, #4283, #3679, #3104, #4336 ) ) ; +#1404 = ORIENTED_EDGE ( 'NONE', *, *, #1649, .F. ) ; +#1405 = LINE ( 'NONE', #3745, #3309 ) ; +#1406 = CIRCLE ( 'NONE', #3903, 3.189999999999994200 ) ; +#1407 = EDGE_CURVE ( 'NONE', #2672, #3586, #1135, .T. ) ; +#1408 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 12.49999753194996900, 15.00001676643945100 ) ) ; +#1409 = ORIENTED_EDGE ( 'NONE', *, *, #2613, .F. ) ; +#1410 = FACE_OUTER_BOUND ( 'NONE', #2950, .T. ) ; +#1411 = CARTESIAN_POINT ( 'NONE', ( 4.895621103450441300, 20.59801037049128400, 70.01626317724741000 ) ) ; +#1412 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1413 = CARTESIAN_POINT ( 'NONE', ( 12.32082183473175100, 21.67285896949472600, 69.60964548071815700 ) ) ; +#1414 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#1415 = EDGE_LOOP ( 'NONE', ( #3227, #4431, #3846, #3281, #4463, #3898, #3313, #4511, #3951, #3357, #4566, #3969, #4602, #4010 ) ) ; +#1416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1417 = VERTEX_POINT ( 'NONE', #4562 ) ; +#1418 = EDGE_CURVE ( 'NONE', #4593, #35, #289, .T. ) ; +#1419 = CIRCLE ( 'NONE', #1729, 5.101600000000001200 ) ; +#1420 = EDGE_CURVE ( 'NONE', #1149, #2310, #216, .T. ) ; +#1421 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #4544, .NOT_KNOWN. ) ; +#1422 = CARTESIAN_POINT ( 'NONE', ( 15.10595566532651900, -11.51850558168276000, 8.629772502974139700 ) ) ; +#1423 = ADVANCED_FACE ( 'NONE', ( #209 ), #3153, .T. ) ; +#1424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1425 = EDGE_CURVE ( 'NONE', #3586, #4230, #1304, .T. ) ; +#1426 = CARTESIAN_POINT ( 'NONE', ( 13.97108500160223700, -9.009818988032241900, -13.04135648547856300 ) ) ; +#1427 = CARTESIAN_POINT ( 'NONE', ( 11.55792896823280300, -13.89269764528528700, -11.48863197446418400 ) ) ; +#1428 = AXIS2_PLACEMENT_3D ( 'NONE', #3343, #1166, #3695 ) ; +#1429 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1430 = CARTESIAN_POINT ( 'NONE', ( 3.050162992177424500, 22.47687740236376500, 70.06503289513187800 ) ) ; +#1431 = CIRCLE ( 'NONE', #1453, 7.500000000000000000 ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( -2.246389198657723400, 6.981645602646741700, -10.12931627621298800 ) ) ; +#1433 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.146386871659068900E-032, 9.912705577010325500E-017 ) ) ; +#1434 = CIRCLE ( 'NONE', #3814, 3.189999999999994200 ) ; +#1435 = EDGE_CURVE ( 'NONE', #2106, #4230, #163, .T. ) ; +#1436 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1713, #3862, #4565, #2451, #123, #2807, #540, #3156 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001585111114851651100, 0.002377666672277479000, 0.003170222229703306600 ), + .UNSPECIFIED. ) ; +#1437 = ADVANCED_FACE ( 'NONE', ( #231 ), #3804, .T. ) ; +#1438 = CIRCLE ( 'NONE', #1351, 1.200000000000011700 ) ; +#1439 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000002100, -11.61321192051223900, 10.94190972788656400 ) ) ; +#1440 = FACE_OUTER_BOUND ( 'NONE', #4657, .T. ) ; +#1441 = CIRCLE ( 'NONE', #3962, 1.200000000000010200 ) ; +#1442 = CARTESIAN_POINT ( 'NONE', ( 1.822331664072833100, 23.23904614095902600, 69.41501538644436700 ) ) ; +#1443 = CARTESIAN_POINT ( 'NONE', ( 15.03713060745179000, -10.24005805573186700, -11.44256555102612300 ) ) ; +#1444 = EDGE_CURVE ( 'NONE', #2458, #2310, #146, .T. ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 20.00001676643945100 ) ) ; +#1446 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.33640205742939100, 11.22377341792961400 ) ) ; +#1447 = CARTESIAN_POINT ( 'NONE', ( 1.553777782864382800, 24.54504073027934700, 69.35280432316314100 ) ) ; +#1448 = FACE_OUTER_BOUND ( 'NONE', #4610, .T. ) ; +#1449 = EDGE_CURVE ( 'NONE', #1344, #355, #200, .T. ) ; +#1450 = ADVANCED_FACE ( 'NONE', ( #104 ), #3923, .F. ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( -0.7669253518969192400, 5.177450703498902100, -12.91433018615139100 ) ) ; +#1452 = CARTESIAN_POINT ( 'NONE', ( -0.2096301750190522900, -11.63176217742977400, 0.8949205625687917100 ) ) ; +#1453 = AXIS2_PLACEMENT_3D ( 'NONE', #400, #3035, #824 ) ; +#1454 = ORIENTED_EDGE ( 'NONE', *, *, #494, .F. ) ; +#1455 = CYLINDRICAL_SURFACE ( 'NONE', #3911, 3.189999999999994200 ) ; +#1456 = AXIS2_PLACEMENT_3D ( 'NONE', #2279, #4718, #2626 ) ; +#1457 = CARTESIAN_POINT ( 'NONE', ( 2.888650360688289200, 6.794314365993726000, -10.39603683189176500 ) ) ; +#1458 = VERTEX_POINT ( 'NONE', #187 ) ; +#1459 = CARTESIAN_POINT ( 'NONE', ( -23.81217441274562000, 12.49999753194997300, 15.30923614111755000 ) ) ; +#1460 = ORIENTED_EDGE ( 'NONE', *, *, #847, .T. ) ; +#1461 = ADVANCED_FACE ( 'NONE', ( #133 ), #86, .T. ) ; +#1462 = EDGE_CURVE ( 'NONE', #3250, #2672, #1067, .T. ) ; +#1463 = CARTESIAN_POINT ( 'NONE', ( 1.575348587719996600, 7.499997531949971700, -8.003269003328144400 ) ) ; +#1464 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#1465 = ORIENTED_EDGE ( 'NONE', *, *, #1372, .F. ) ; +#1466 = ORIENTED_EDGE ( 'NONE', *, *, #4042, .F. ) ; +#1467 = AXIS2_PLACEMENT_3D ( 'NONE', #2726, #449, #3077 ) ; +#1468 = LINE ( 'NONE', #625, #4421 ) ; +#1469 = ADVANCED_FACE ( 'NONE', ( #92 ), #143, .T. ) ; +#1470 = LINE ( 'NONE', #4090, #1525 ) ; +#1471 = EDGE_CURVE ( 'NONE', #4230, #3057, #2303, .T. ) ; +#1472 = CARTESIAN_POINT ( 'NONE', ( 13.26972189700091500, -10.48186707534378600, -10.77203695102143200 ) ) ; +#1473 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1474 = ORIENTED_EDGE ( 'NONE', *, *, #1138, .F. ) ; +#1475 = ORIENTED_EDGE ( 'NONE', *, *, #570, .F. ) ; +#1476 = CARTESIAN_POINT ( 'NONE', ( 14.53037145317572900, 5.808642352861677500, -12.39266439744794500 ) ) ; +#1477 = CIRCLE ( 'NONE', #1631, 3.750000000000000000 ) ; +#1478 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.186988295993375100, 17.50001676643945100 ) ) ; +#1479 = CARTESIAN_POINT ( 'NONE', ( 12.81194866116864400, -11.01029705506539900, -8.844255476812831400 ) ) ; +#1480 = VERTEX_POINT ( 'NONE', #3747 ) ; +#1481 = CARTESIAN_POINT ( 'NONE', ( 1.519723418810282200, -11.63176217742977600, 7.500016766439451000 ) ) ; +#1482 = ADVANCED_FACE ( 'NONE', ( #98 ), #3268, .T. ) ; +#1483 = EDGE_CURVE ( 'NONE', #4071, #3737, #74, .T. ) ; +#1484 = ORIENTED_EDGE ( 'NONE', *, *, #494, .T. ) ; +#1485 = ADVANCED_FACE ( 'NONE', ( #80 ), #23, .F. ) ; +#1486 = CARTESIAN_POINT ( 'NONE', ( 12.79389080923294800, -11.63176217742977200, 1.213671330036752500 ) ) ; +#1487 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -14.13176217742977400, -11.35960056912454300 ) ) ; +#1488 = EDGE_CURVE ( 'NONE', #3559, #3076, #151, .T. ) ; +#1489 = CARTESIAN_POINT ( 'NONE', ( -0.09311627053431699400, -11.34447659833803000, 9.207832114997467300 ) ) ; +#1490 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1491 = EDGE_CURVE ( 'NONE', #3057, #1149, #3709, .T. ) ; +#1492 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949971700, -7.834640608427718300 ) ) ; +#1493 = CARTESIAN_POINT ( 'NONE', ( 1.791625674340192800, -12.96664603309567800, -12.54328693733198300 ) ) ; +#1494 = CARTESIAN_POINT ( 'NONE', ( 15.41070534606429200, -11.50878506170670000, -5.784487474456973600 ) ) ; +#1495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1496 = EDGE_CURVE ( 'NONE', #3875, #4571, #19, .T. ) ; +#1497 = LINE ( 'NONE', #452, #721 ) ; +#1498 = FACE_OUTER_BOUND ( 'NONE', #1815, .T. ) ; +#1499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1500 = ADVANCED_FACE ( 'NONE', ( #45 ), #3871, .T. ) ; +#1501 = CARTESIAN_POINT ( 'NONE', ( 0.6083332112295004600, -13.10273415414968000, 7.756376460481668300 ) ) ; +#1502 = EDGE_CURVE ( 'NONE', #306, #4349, #28, .T. ) ; +#1503 = CIRCLE ( 'NONE', #3936, 3.189999999999994200 ) ; +#1504 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1505 = ADVANCED_FACE ( 'NONE', ( #114 ), #3927, .T. ) ; +#1506 = CIRCLE ( 'NONE', #3994, 1.000000000000000200 ) ; +#1507 = CARTESIAN_POINT ( 'NONE', ( 12.79953866904714100, -13.43366178902933500, -4.509506735154757500 ) ) ; +#1508 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1509 = CARTESIAN_POINT ( 'NONE', ( 1.123498822893523400, -9.408131832748871700, -12.65158772464080900 ) ) ; +#1510 = ORIENTED_EDGE ( 'NONE', *, *, #3873, .F. ) ; +#1511 = TOROIDAL_SURFACE ( 'NONE', #3971, 5.601600000000002100, 0.5000000000000000000 ) ; +#1512 = ADVANCED_FACE ( 'NONE', ( #3020 ), #2381, .F. ) ; +#1513 = EDGE_CURVE ( 'NONE', #2210, #3722, #904, .T. ) ; +#1514 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 19.98722159839779500, 70.00001676643945800 ) ) ; +#1515 = ORIENTED_EDGE ( 'NONE', *, *, #247, .F. ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 2.426714878844896000, -12.91515586457767200 ) ) ; +#1517 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999625900, 2.761574790416403400, 12.50001676644523100 ) ) ; +#1518 = VECTOR ( 'NONE', #1611, 1000.000000000000000 ) ; +#1519 = EDGE_CURVE ( 'NONE', #2818, #306, #771, .T. ) ; +#1520 = PLANE ( 'NONE', #4432 ) ; +#1521 = ORIENTED_EDGE ( 'NONE', *, *, #1608, .T. ) ; +#1522 = ORIENTED_EDGE ( 'NONE', *, *, #297, .T. ) ; +#1523 = CARTESIAN_POINT ( 'NONE', ( 13.48392650275777700, 7.352132799693520400, -9.047549159788896800 ) ) ; +#1524 = AXIS2_PLACEMENT_3D ( 'NONE', #2966, #734, #3330 ) ; +#1525 = VECTOR ( 'NONE', #1623, 1000.000000000000000 ) ; +#1526 = APPROVAL_ROLE ( '' ) ; +#1527 = EDGE_LOOP ( 'NONE', ( #4572, #3995, #3448, #4608, #4015, #3461, #4619, #4054 ) ) ; +#1528 = ORIENTED_EDGE ( 'NONE', *, *, #437, .T. ) ; +#1529 = EDGE_CURVE ( 'NONE', #3910, #1071, #3031, .T. ) ; +#1530 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -13.17394646130280100, 60.10161676643944900 ) ) ; +#1531 = ADVANCED_FACE ( 'NONE', ( #957 ), #1996, .T. ) ; +#1532 = CARTESIAN_POINT ( 'NONE', ( -7.051970280868359400E-016, 3.382781095964635400, -15.28514212486994200 ) ) ; +#1533 = LINE ( 'NONE', #2338, #3325 ) ; +#1534 = LINE ( 'NONE', #3372, #1578 ) ; +#1535 = AXIS2_PLACEMENT_3D ( 'NONE', #2949, #717, #3321 ) ; +#1536 = EDGE_LOOP ( 'NONE', ( #3161, #3172, #3190 ) ) ; +#1537 = VECTOR ( 'NONE', #2143, 1000.000000000000000 ) ; +#1538 = EDGE_CURVE ( 'NONE', #236, #4701, #4669, .T. ) ; +#1539 = ADVANCED_FACE ( 'NONE', ( #1214 ), #4768, .T. ) ; +#1540 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -6.789971767620634100, 15.00001676643945500 ) ) ; +#1541 = CARTESIAN_POINT ( 'NONE', ( 15.50583519733033100, 4.715753562568810500, 12.89301452964323100 ) ) ; +#1542 = ORIENTED_EDGE ( 'NONE', *, *, #705, .F. ) ; +#1543 = CARTESIAN_POINT ( 'NONE', ( -7.404053513734826500E-016, 24.99999753195022100, 68.12759908322145500 ) ) ; +#1544 = CARTESIAN_POINT ( 'NONE', ( 14.06693147497343300, 3.244746686838853000, -12.77886437928318800 ) ) ; +#1545 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -14.13176217742977600, -2.203671148763222300E-015 ) ) ; +#1546 = CARTESIAN_POINT ( 'NONE', ( 11.99748915744071600, 6.772644270047822000, -10.43310307121573800 ) ) ; +#1547 = ORIENTED_EDGE ( 'NONE', *, *, #16, .T. ) ; +#1548 = CIRCLE ( 'NONE', #1811, 1.000000000000000000 ) ; +#1549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1550 = CARTESIAN_POINT ( 'NONE', ( -0.6698729810778008000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#1551 = AXIS2_PLACEMENT_3D ( 'NONE', #3539, #1395, #3893 ) ; +#1552 = EDGE_CURVE ( 'NONE', #4036, #2750, #4629, .T. ) ; +#1553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1554 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -8.172618984092986600, 15.50086732624750300 ) ) ; +#1555 = CARTESIAN_POINT ( 'NONE', ( 16.97828611958728500, 6.868929474346497700, 10.01811166678448100 ) ) ; +#1556 = AXIS2_PLACEMENT_3D ( 'NONE', #4007, #1906, #4360 ) ; +#1557 = ADVANCED_FACE ( 'NONE', ( #2124 ), #1949, .T. ) ; +#1558 = CARTESIAN_POINT ( 'NONE', ( 2.032039115544007400, 23.59380510570627400, 69.64196688555816200 ) ) ; +#1559 = CARTESIAN_POINT ( 'NONE', ( 14.00755175911287300, 2.627288019610016300, -12.87978940825533900 ) ) ; +#1560 = CARTESIAN_POINT ( 'NONE', ( 11.00679128130450100, 20.55293979002667400, 69.89760508273241200 ) ) ; +#1561 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2882, #213, #3953, #1852 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0005058054946803305700 ), + .UNSPECIFIED. ) ; +#1562 = EDGE_CURVE ( 'NONE', #2210, #4029, #1087, .T. ) ; +#1563 = LINE ( 'NONE', #765, #1518 ) ; +#1564 = ADVANCED_FACE ( 'NONE', ( #2978 ), #3935, .T. ) ; +#1565 = AXIS2_PLACEMENT_3D ( 'NONE', #1445, #3943, #1841 ) ; +#1566 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -14.13176217742977400, -11.35960056912454300 ) ) ; +#1567 = TOROIDAL_SURFACE ( 'NONE', #3114, 6.000000000000000000, 1.000000000000000000 ) ; +#1568 = CYLINDRICAL_SURFACE ( 'NONE', #4016, 5.000000000000000000 ) ; +#1569 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 23.14520115483807000, 65.41041517851354600 ) ) ; +#1570 = AXIS2_PLACEMENT_3D ( 'NONE', #702, #3298, #1110 ) ; +#1571 = CARTESIAN_POINT ( 'NONE', ( 40.19174207655505900, 12.49999753194997300, 17.50001676643945100 ) ) ; +#1572 = CIRCLE ( 'NONE', #4025, 1.200000000000011700 ) ; +#1573 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 22.96671093411200500, 65.36592879827269100 ) ) ; +#1574 = ORIENTED_EDGE ( 'NONE', *, *, #549, .F. ) ; +#1575 = FACE_OUTER_BOUND ( 'NONE', #2798, .T. ) ; +#1576 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999800, 22.38427192120870800, 68.34637720887745600 ) ) ; +#1577 = ORIENTED_EDGE ( 'NONE', *, *, #563, .F. ) ; +#1578 = VECTOR ( 'NONE', #1194, 1000.000000000000000 ) ; +#1579 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.146386871659068900E-032, -9.912705577010325500E-017 ) ) ; +#1580 = ORIENTED_EDGE ( 'NONE', *, *, #1418, .T. ) ; +#1581 = VERTEX_POINT ( 'NONE', #363 ) ; +#1582 = FACE_OUTER_BOUND ( 'NONE', #3489, .T. ) ; +#1583 = EDGE_CURVE ( 'NONE', #1702, #4349, #3978, .T. ) ; +#1584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#1585 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #109, #4548, #2095, #2784 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 8.673617379884035500E-019, 0.001159376517534454700 ), + .UNSPECIFIED. ) ; +#1586 = ORIENTED_EDGE ( 'NONE', *, *, #1600, .T. ) ; +#1587 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, 21.30501735789350800, 65.03274876851666900 ) ) ; +#1588 = ORIENTED_EDGE ( 'NONE', *, *, #4643, .F. ) ; +#1589 = EDGE_CURVE ( 'NONE', #3359, #2818, #4723, .T. ) ; +#1590 = CARTESIAN_POINT ( 'NONE', ( 3.867380170281791700E-013, 20.69171898879440600, 69.00757882249227700 ) ) ; +#1591 = PLANE ( 'NONE', #3990 ) ; +#1592 = CARTESIAN_POINT ( 'NONE', ( 0.8272202564643799100, 3.830332587470867800, -12.69065748881409700 ) ) ; +#1593 = CARTESIAN_POINT ( 'NONE', ( 10.69077521813950300, 20.33509968220043600, 69.96256812098701500 ) ) ; +#1594 = LINE ( 'NONE', #4046, #1634 ) ; +#1595 = ORIENTED_EDGE ( 'NONE', *, *, #705, .T. ) ; +#1596 = AXIS2_PLACEMENT_3D ( 'NONE', #2119, #2127, #4576 ) ; +#1597 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1598 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 21.30411613570582900, 65.03261802005714300 ) ) ; +#1599 = VERTEX_POINT ( 'NONE', #3383 ) ; +#1600 = EDGE_CURVE ( 'NONE', #3722, #3131, #2170, .T. ) ; +#1601 = VERTEX_POINT ( 'NONE', #2315 ) ; +#1602 = CARTESIAN_POINT ( 'NONE', ( 14.99766962663216100, 2.579063988065854100, -12.88829260613512100 ) ) ; +#1603 = CARTESIAN_POINT ( 'NONE', ( 11.89892934706295700, 22.38721851552206500, 69.13499633262615900 ) ) ; +#1604 = CIRCLE ( 'NONE', #1250, 45.00000000000000700 ) ; +#1605 = AXIS2_PLACEMENT_3D ( 'NONE', #3506, #2786, #1358 ) ; +#1606 = ORIENTED_EDGE ( 'NONE', *, *, #2072, .F. ) ; +#1607 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1608 = EDGE_CURVE ( 'NONE', #3250, #1458, #2064, .T. ) ; +#1609 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1610 = CYLINDRICAL_SURFACE ( 'NONE', #3513, 1.000000000000000900 ) ; +#1611 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1612 = ORIENTED_EDGE ( 'NONE', *, *, #219, .F. ) ; +#1613 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 2.499997531949969000, 13.50001676643945100 ) ) ; +#1614 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1615 = CARTESIAN_POINT ( 'NONE', ( 12.26185926256073300, -11.53410747072216200, -5.556885593332421700 ) ) ; +#1616 = CARTESIAN_POINT ( 'NONE', ( 14.96813884738282900, -9.767406204818101400, -13.81953167008643400 ) ) ; +#1617 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.146386871659068900E-032, 9.912705577010325500E-017 ) ) ; +#1618 = EDGE_CURVE ( 'NONE', #35, #4079, #3257, .T. ) ; +#1619 = EDGE_CURVE ( 'NONE', #2672, #3467, #1160, .T. ) ; +#1620 = AXIS2_PLACEMENT_3D ( 'NONE', #3280, #1093, #3635 ) ; +#1621 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 9.099997531949975700, -3.799983233560532800 ) ) ; +#1622 = AXIS2_PLACEMENT_3D ( 'NONE', #975, #3537, #1393 ) ; +#1623 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1624 = FACE_OUTER_BOUND ( 'NONE', #3176, .T. ) ; +#1625 = FACE_OUTER_BOUND ( 'NONE', #4180, .T. ) ; +#1626 = EDGE_CURVE ( 'NONE', #3586, #3808, #3090, .T. ) ; +#1627 = CARTESIAN_POINT ( 'NONE', ( 2.398399999999998300, 24.99999753194998300, 67.50001676643944400 ) ) ; +#1628 = CARTESIAN_POINT ( 'NONE', ( 14.49680870096712000, -11.32871072983629200, -12.32365593263296300 ) ) ; +#1629 = CARTESIAN_POINT ( 'NONE', ( 0.6053159359980995200, -13.10166471870488000, 7.781272550705364400 ) ) ; +#1630 = CIRCLE ( 'NONE', #4083, 1.000000000000000700 ) ; +#1631 = AXIS2_PLACEMENT_3D ( 'NONE', #525, #3142, #940 ) ; +#1632 = CARTESIAN_POINT ( 'NONE', ( 15.00629313259406100, 2.750779753055784000, -13.86459716126755200 ) ) ; +#1633 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1634 = VECTOR ( 'NONE', #1943, 1000.000000000000000 ) ; +#1635 = ORIENTED_EDGE ( 'NONE', *, *, #1519, .F. ) ; +#1636 = DIRECTION ( 'NONE', ( -9.912705577010325500E-017, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#1637 = CARTESIAN_POINT ( 'NONE', ( 14.13289555117662000, -13.19445271601598600, 5.621209537410021700 ) ) ; +#1638 = FACE_OUTER_BOUND ( 'NONE', #3294, .T. ) ; +#1639 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1640 = ORIENTED_EDGE ( 'NONE', *, *, #3, .T. ) ; +#1641 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 0.0000000000000000000, -14.99998323356054700 ) ) ; +#1642 = FACE_BOUND ( 'NONE', #3857, .T. ) ; +#1643 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999997800, 7.597114959037285500, -9.999983233560549000 ) ) ; +#1644 = ORIENTED_EDGE ( 'NONE', *, *, #1619, .F. ) ; +#1645 = EDGE_CURVE ( 'NONE', #419, #3808, #1533, .T. ) ; +#1646 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 8.385741033500860200, -8.999983233560547200 ) ) ; +#1647 = ORIENTED_EDGE ( 'NONE', *, *, #294, .F. ) ; +#1648 = VECTOR ( 'NONE', #4370, 1000.000000000000000 ) ; +#1649 = EDGE_CURVE ( 'NONE', #4417, #3580, #371, .T. ) ; +#1650 = ORIENTED_EDGE ( 'NONE', *, *, #2072, .T. ) ; +#1651 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -5.711846095760980000, -9.273070689112936200 ) ) ; +#1652 = ORIENTED_EDGE ( 'NONE', *, *, #1418, .F. ) ; +#1653 = EDGE_CURVE ( 'NONE', #3686, #4288, #59, .T. ) ; +#1654 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -4.999983233560542800 ) ) ; +#1655 = FACE_OUTER_BOUND ( 'NONE', #2377, .T. ) ; +#1656 = CARTESIAN_POINT ( 'NONE', ( 15.14398311961369900, 3.830332587471377600, -13.66186086489190500 ) ) ; +#1657 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.131762177429774100, -16.19731048123461300 ) ) ; +#1658 = ORIENTED_EDGE ( 'NONE', *, *, #747, .F. ) ; +#1659 = CARTESIAN_POINT ( 'NONE', ( 0.9974816915449278300, 2.527059315175727200, -12.89746243308856500 ) ) ; +#1660 = DIRECTION ( 'NONE', ( -0.9954315580766516200, 0.0000000000000000000, -0.09547781514618890200 ) ) ; +#1661 = CARTESIAN_POINT ( 'NONE', ( 1.141291818896139600E-031, -9.169981120124589300, 17.16844238186305600 ) ) ; +#1662 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 7.499997531949976100, -14.99998323356054400 ) ) ; +#1663 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ; +#1664 = CARTESIAN_POINT ( 'NONE', ( 3.168628553659603500, 7.663198931722782900, -9.945784968142794100 ) ) ; +#1665 = CARTESIAN_POINT ( 'NONE', ( 13.23753355057194100, 7.164450935725552600, -9.638001055772283700 ) ) ; +#1666 = EDGE_CURVE ( 'NONE', #4230, #3137, #1548, .T. ) ; +#1667 = CARTESIAN_POINT ( 'NONE', ( 13.13646471799339500, -10.65557951434298400, -10.20142919904823800 ) ) ; +#1668 = ORIENTED_EDGE ( 'NONE', *, *, #4331, .F. ) ; +#1669 = AXIS2_PLACEMENT_3D ( 'NONE', #2066, #2051, #892 ) ; +#1670 = FACE_OUTER_BOUND ( 'NONE', #4493, .T. ) ; +#1671 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807100E-015, -1.000000000000000000 ) ) ; +#1672 = CARTESIAN_POINT ( 'NONE', ( 13.49999999999999800, 7.499997531949971700, -7.834640608427718300 ) ) ; +#1673 = EDGE_CURVE ( 'NONE', #3057, #4640, #3202, .T. ) ; +#1674 = CARTESIAN_POINT ( 'NONE', ( 16.06995122182326700, 5.624294009975882200, -11.76468938660445000 ) ) ; +#1675 = CARTESIAN_POINT ( 'NONE', ( 38.34161575027604100, 12.49999753194997100, 15.11897771807489500 ) ) ; +#1676 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999753194998300, -16.84376276178052500 ) ) ; +#1677 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -7.442613675584429000, 15.12538866215956900 ) ) ; +#1678 = CARTESIAN_POINT ( 'NONE', ( 73.21443512576246300, -11.44630387609749900, 65.00001676643944400 ) ) ; +#1679 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -4.999983233560542800 ) ) ; +#1680 = CARTESIAN_POINT ( 'NONE', ( 2.546545990180789000, 7.269832162352873400, -9.401479397806774300 ) ) ; +#1681 = CARTESIAN_POINT ( 'NONE', ( 12.01084389611939000, 7.759004856505146800, -9.862107802325656500 ) ) ; +#1682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1683 = EDGE_CURVE ( 'NONE', #3072, #1976, #2272, .T. ) ; +#1684 = CIRCLE ( 'NONE', #407, 1.200000000000010200 ) ; +#1685 = VECTOR ( 'NONE', #291, 1000.000000000000000 ) ; +#1686 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -10.55229541076279200, 10.60314730934791400 ) ) ; +#1687 = EDGE_CURVE ( 'NONE', #3359, #1092, #4196, .T. ) ; +#1688 = CARTESIAN_POINT ( 'NONE', ( 2.860776828128647400, 7.850233671150747700, -9.778670441322336900 ) ) ; +#1689 = TOROIDAL_SURFACE ( 'NONE', #2652, 45.00000000000000700, 5.000000000000000000 ) ; +#1690 = CARTESIAN_POINT ( 'NONE', ( 18.57889750691511900, 7.393692747906457400, -9.018892685998162400 ) ) ; +#1691 = CYLINDRICAL_SURFACE ( 'NONE', #4107, 1.000000000000000700 ) ; +#1692 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1693 = AXIS2_PLACEMENT_3D ( 'NONE', #3827, #1736, #4183 ) ; +#1694 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949969900, 7.500016766439451900 ) ) ; +#1695 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1696 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.40859220248919600, 68.13452563932646900 ) ) ; +#1697 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1698 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914452962100, 3.244746686838852100, -13.76770913345428000 ) ) ; +#1699 = CIRCLE ( 'NONE', #4133, 5.101600000000001200 ) ; +#1700 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1701 = CARTESIAN_POINT ( 'NONE', ( 1.500000014662509700, 7.360987890496750700, -9.026957405321153900 ) ) ; +#1702 = VERTEX_POINT ( 'NONE', #2378 ) ; +#1703 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999500, 7.040985457330474000, -9.999983233560545400 ) ) ; +#1704 = AXIS2_PLACEMENT_3D ( 'NONE', #4201, #2097, #4550 ) ; +#1705 = FACE_OUTER_BOUND ( 'NONE', #1833, .T. ) ; +#1706 = CARTESIAN_POINT ( 'NONE', ( -0.07777909603294036500, -10.77608023605359500, -9.783319925755508400 ) ) ; +#1707 = VERTEX_POINT ( 'NONE', #2745 ) ; +#1708 = EDGE_CURVE ( 'NONE', #2818, #3233, #442, .T. ) ; +#1709 = LINE ( 'NONE', #3656, #1648 ) ; +#1710 = ORIENTED_EDGE ( 'NONE', *, *, #1683, .T. ) ; +#1711 = ORIENTED_EDGE ( 'NONE', *, *, #3864, .F. ) ; +#1712 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1713 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.131762177429775900, -16.19731048123461300 ) ) ; +#1714 = VECTOR ( 'NONE', #667, 1000.000000000000000 ) ; +#1715 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -8.189983233560536000 ) ) ; +#1716 = VERTEX_POINT ( 'NONE', #467 ) ; +#1717 = ORIENTED_EDGE ( 'NONE', *, *, #70, .T. ) ; +#1718 = CARTESIAN_POINT ( 'NONE', ( 2.689997214450254000, -11.63176217742977400, -3.277205641478954800 ) ) ; +#1719 = LINE ( 'NONE', #2909, #1714 ) ; +#1720 = EDGE_CURVE ( 'NONE', #2840, #3395, #1419, .T. ) ; +#1721 = ADVANCED_FACE ( 'NONE', ( #322 ), #182, .F. ) ; +#1722 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1723 = ORIENTED_EDGE ( 'NONE', *, *, #308, .F. ) ; +#1724 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 60.10161676643944900 ) ) ; +#1725 = EDGE_CURVE ( 'NONE', #807, #4696, #2877, .T. ) ; +#1726 = CARTESIAN_POINT ( 'NONE', ( -1.701608135275166700E-015, 2.827250477872691900, 13.50001676643876900 ) ) ; +#1727 = ORIENTED_EDGE ( 'NONE', *, *, #1295, .T. ) ; +#1728 = VERTEX_POINT ( 'NONE', #488 ) ; +#1729 = AXIS2_PLACEMENT_3D ( 'NONE', #4522, #2405, #72 ) ; +#1730 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 2.499997531949969900, 12.50001676643945100 ) ) ; +#1731 = FACE_OUTER_BOUND ( 'NONE', #1839, .T. ) ; +#1732 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 26.77590825245414800, 41.25001676643945100 ) ) ; +#1733 = CARTESIAN_POINT ( 'NONE', ( 1.897852104109682300, -11.63176217742977400, 3.906261286982965600 ) ) ; +#1734 = CARTESIAN_POINT ( 'NONE', ( 0.9824977518060900000, 2.833683172636274300, -12.84339637408936200 ) ) ; +#1735 = EDGE_LOOP ( 'NONE', ( #1934, #1972, #2025, #2044 ) ) ; +#1736 = DIRECTION ( 'NONE', ( -0.04939632868927659000, 0.9836055551011490000, 0.1734361977390579100 ) ) ; +#1737 = CARTESIAN_POINT ( 'NONE', ( 1.156306723755249300, -11.26323922648734700, 9.404699816307090300 ) ) ; +#1738 = CARTESIAN_POINT ( 'NONE', ( 3.318738069405752400, 22.05157766205344700, 69.17905157657067200 ) ) ; +#1739 = CARTESIAN_POINT ( 'NONE', ( 0.8250802184410900300, -11.88734931044138300, -11.38890334687480700 ) ) ; +#1740 = CARTESIAN_POINT ( 'NONE', ( 0.1419327528377807300, -10.35072914273529500, -13.37020526212355200 ) ) ; +#1741 = CARTESIAN_POINT ( 'NONE', ( -0.3565899807379703200, 4.407143856427208700, 12.14342678570170600 ) ) ; +#1742 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1743 = CARTESIAN_POINT ( 'NONE', ( 1.120379032197422500, -13.26091416546177400, 3.831492992386475600 ) ) ; +#1744 = EDGE_CURVE ( 'NONE', #3299, #3256, #4586, .T. ) ; +#1745 = DIRECTION ( 'NONE', ( 9.912705577010325500E-017, -1.982541115402065100E-016, 1.000000000000000000 ) ) ; +#1746 = CARTESIAN_POINT ( 'NONE', ( 1.122121923689586700, -9.403446345671230900, -12.65655216067194600 ) ) ; +#1747 = LINE ( 'NONE', #2782, #1963 ) ; +#1748 = EDGE_CURVE ( 'NONE', #3917, #3411, #4145, .T. ) ; +#1749 = CARTESIAN_POINT ( 'NONE', ( -1.312719678436491000, 6.498331742512446500, 10.57275036774244500 ) ) ; +#1750 = LINE ( 'NONE', #250, #1685 ) ; +#1751 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, 24.99999753194998300, 67.50001676643944400 ) ) ; +#1752 = CARTESIAN_POINT ( 'NONE', ( 1.895739284176367400, -13.41469356539604100, -1.537065408856712600 ) ) ; +#1753 = TOROIDAL_SURFACE ( 'NONE', #4143, 6.000000000000000000, 1.000000000000000000 ) ; +#1754 = AXIS2_PLACEMENT_3D ( 'NONE', #3462, #1306, #3816 ) ; +#1755 = CARTESIAN_POINT ( 'NONE', ( 12.60160000000000100, 24.99999753194997300, 70.15629358091169400 ) ) ; +#1756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1757 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ; +#1758 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1759 = CARTESIAN_POINT ( 'NONE', ( 2.718270045816221900, -11.63176217742977600, -3.560635029822815300 ) ) ; +#1760 = DESIGN_CONTEXT ( 'detailed design', #3293, 'design' ) ; +#1761 = AXIS2_PLACEMENT_3D ( 'NONE', #2402, #68, #2759 ) ; +#1762 = FACE_OUTER_BOUND ( 'NONE', #2741, .T. ) ; +#1763 = ORIENTED_EDGE ( 'NONE', *, *, #33, .T. ) ; +#1764 = CARTESIAN_POINT ( 'NONE', ( 15.07908012879652500, -10.85326599177283100, -9.483526948552260200 ) ) ; +#1765 = ORIENTED_EDGE ( 'NONE', *, *, #103, .T. ) ; +#1766 = AXIS2_PLACEMENT_3D ( 'NONE', #4502, #2392, #57 ) ; +#1767 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.186988295993375100, 15.00001676643945100 ) ) ; +#1768 = VECTOR ( 'NONE', #3255, 1000.000000000000000 ) ; +#1769 = ORIENTED_EDGE ( 'NONE', *, *, #237, .T. ) ; +#1770 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ; +#1771 = CIRCLE ( 'NONE', #4223, 2.499999999999998700 ) ; +#1772 = ORIENTED_EDGE ( 'NONE', *, *, #33, .F. ) ; +#1773 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1774 = VERTEX_POINT ( 'NONE', #3842 ) ; +#1775 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 20.55293979002667700, 65.00001676643944400 ) ) ; +#1776 = LINE ( 'NONE', #650, #1768 ) ; +#1777 = PLANE ( 'NONE', #3928 ) ; +#1778 = CARTESIAN_POINT ( 'NONE', ( -0.4894573447330014500, -11.56647479410315400, -5.100212015639119300 ) ) ; +#1779 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ; +#1780 = CARTESIAN_POINT ( 'NONE', ( 12.83001462900844000, -13.35074333101989700, -5.719911713196776900 ) ) ; +#1781 = EDGE_CURVE ( 'NONE', #3100, #2632, #1477, .T. ) ; +#1782 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 8.019335917570373600E-017 ) ) ; +#1783 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2929, #1939, #2635, #341, #2983, #760, #3348, #1172, #3699, #1587, #4056, #1954 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005696125801148307900, 0.001139225160229661600, 0.002278450320459332300, 0.003417675480689002300, 0.004556900640918673200 ), + .UNSPECIFIED. ) ; +#1784 = CARTESIAN_POINT ( 'NONE', ( -0.006293132594061464800, 2.750779753055784000, -13.86459716126755200 ) ) ; +#1785 = EDGE_LOOP ( 'NONE', ( #1787, #1830, #1845, #1873, #1883, #1919, #1923 ) ) ; +#1786 = AXIS2_PLACEMENT_3D ( 'NONE', #1288, #3791, #1695 ) ; +#1787 = ORIENTED_EDGE ( 'NONE', *, *, #736, .F. ) ; +#1788 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949971700, -7.834640608427718300 ) ) ; +#1789 = CARTESIAN_POINT ( 'NONE', ( 1.322380052224768600, -12.52807398562071000, -9.638285113632862900 ) ) ; +#1790 = TOROIDAL_SURFACE ( 'NONE', #1322, 6.000000000000000000, 1.000000000000000000 ) ; +#1791 = CARTESIAN_POINT ( 'NONE', ( 12.24431548696904100, 23.08463409641278100, 69.06453708475791600 ) ) ; +#1792 = DIRECTION ( 'NONE', ( 9.912705577010325500E-017, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1793 = DIRECTION ( 'NONE', ( 1.734723475976807300E-016, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#1794 = AXIS2_PLACEMENT_3D ( 'NONE', #2727, #450, #3078 ) ; +#1795 = CARTESIAN_POINT ( 'NONE', ( 1.911283703305996600, -13.10279574359822200, -7.378634787808943300 ) ) ; +#1796 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 12.49999753194997300, 6.500016766439456400 ) ) ; +#1797 = CARTESIAN_POINT ( 'NONE', ( -8.519976981884761500E-016, 2.583635469084848900, -13.89996361758988100 ) ) ; +#1798 = CARTESIAN_POINT ( 'NONE', ( 14.35034572648714900, -13.11737994431847600, 7.415429138009331600 ) ) ; +#1799 = CYLINDRICAL_SURFACE ( 'NONE', #373, 5.000000000000004400 ) ; +#1800 = FACE_OUTER_BOUND ( 'NONE', #3636, .T. ) ; +#1801 = CARTESIAN_POINT ( 'NONE', ( 4.654761238525500400, 20.75316258357086200, 69.46581992194499800 ) ) ; +#1802 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000000, 12.49999753194997600, -14.99998323356054400 ) ) ; +#1803 = CARTESIAN_POINT ( 'NONE', ( 11.62421111973307000, 21.98893829138740600, 70.03333645871838100 ) ) ; +#1804 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1805 = AXIS2_PLACEMENT_3D ( 'NONE', #137, #2823, #562 ) ; +#1806 = LINE ( 'NONE', #58, #4430 ) ; +#1807 = FACE_OUTER_BOUND ( 'NONE', #4297, .T. ) ; +#1808 = CARTESIAN_POINT ( 'NONE', ( 3.993208718695498800, 20.55293979002667400, 69.89760508273241200 ) ) ; +#1809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1810 = FACE_OUTER_BOUND ( 'NONE', #2924, .T. ) ; +#1811 = AXIS2_PLACEMENT_3D ( 'NONE', #4136, #2029, #4486 ) ; +#1812 = VERTEX_POINT ( 'NONE', #2440 ) ; +#1813 = CARTESIAN_POINT ( 'NONE', ( 13.84355142712430700, -11.26352362374241200, 9.404025845230950900 ) ) ; +#1814 = VECTOR ( 'NONE', #1792, 1000.000000000000000 ) ; +#1815 = EDGE_LOOP ( 'NONE', ( #2688, #2691, #2698, #2702 ) ) ; +#1816 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999753194998300, -16.84376276178052500 ) ) ; +#1817 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1818 = AXIS2_PLACEMENT_3D ( 'NONE', #3986, #1881, #4333 ) ; +#1819 = CARTESIAN_POINT ( 'NONE', ( 14.96385625559905100, -9.803826414255663500, -13.79501364458389100 ) ) ; +#1820 = ADVANCED_FACE ( 'NONE', ( #1948 ), #245, .T. ) ; +#1821 = ORIENTED_EDGE ( 'NONE', *, *, #1687, .F. ) ; +#1822 = ORIENTED_EDGE ( 'NONE', *, *, #70, .F. ) ; +#1823 = CARTESIAN_POINT ( 'NONE', ( 10.63478488395489800, -14.10144712169443600, -11.37363070325244700 ) ) ; +#1824 = CARTESIAN_POINT ( 'NONE', ( 5.223150528420450900, 20.43466303776799400, 69.50001676643945800 ) ) ; +#1825 = CARTESIAN_POINT ( 'NONE', ( 2.756985266191445100, 23.08142101694158700, 69.06480349156630900 ) ) ; +#1826 = CIRCLE ( 'NONE', #4375, 35.00000000000000000 ) ; +#1827 = CARTESIAN_POINT ( 'NONE', ( -1.935000631179439000, 6.506232146823744100, -10.89963997724920800 ) ) ; +#1828 = ORIENTED_EDGE ( 'NONE', *, *, #1425, .F. ) ; +#1829 = AXIS2_PLACEMENT_3D ( 'NONE', #848, #3433, #1263 ) ; +#1830 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ; +#1831 = TOROIDAL_SURFACE ( 'NONE', #4351, 2.499999999999998700, 5.000000000000000000 ) ; +#1832 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000002800, -10.55229541076280600, 10.60314730934790900 ) ) ; +#1833 = EDGE_LOOP ( 'NONE', ( #4706, #2148, #4120, #3179 ) ) ; +#1834 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1835 = CARTESIAN_POINT ( 'NONE', ( 1.165417648256180200, -12.34049684824549000, -10.17982295743313700 ) ) ; +#1836 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1544, #4699, #2604 ), + ( #317, #2959, #728 ), + ( #3328, #1146, #3673 ), + ( #1559, #4035, #1928 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 2.168404344971008900E-019, 0.0006035545030861201400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7149077045844127700, 1.000000000000000000), + ( 1.000000000000000000, 0.7136248577316779400, 1.000000000000000000), + ( 1.000000000000000000, 0.7120522622251730400, 1.000000000000000000), + ( 1.000000000000000000, 0.7101794051988763500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1837 = CARTESIAN_POINT ( 'NONE', ( 1.553777777777765500, 24.55048470619626100, 69.35280431832566700 ) ) ; +#1838 = CARTESIAN_POINT ( 'NONE', ( 13.42012169799916400, -10.29596711743290900, -11.28771602769223000 ) ) ; +#1839 = EDGE_LOOP ( 'NONE', ( #695, #703, #757, #816, #825, #832 ) ) ; +#1840 = VECTOR ( 'NONE', #546, 1000.000000000000000 ) ; +#1841 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1842 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -8.561776163818310100, -13.38134266248358300 ) ) ; +#1843 = CARTESIAN_POINT ( 'NONE', ( 2.398399999999997900, 24.99999753194996200, 70.15629358091101200 ) ) ; +#1844 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2760, #69, #3825, #1733, #4181, #2079 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.005420222559395687500, 0.01084044511879137500 ), + .UNSPECIFIED. ) ; +#1845 = ORIENTED_EDGE ( 'NONE', *, *, #219, .T. ) ; +#1846 = EDGE_CURVE ( 'NONE', #4161, #4356, #1436, .T. ) ; +#1847 = CARTESIAN_POINT ( 'NONE', ( 2.309346240233229000, -11.63176217742977200, 0.3161738477811433200 ) ) ; +#1848 = VECTOR ( 'NONE', #1782, 1000.000000000000000 ) ; +#1849 = CARTESIAN_POINT ( 'NONE', ( 2.324028984116234000, 6.923741404108729300, -10.17055215216488900 ) ) ; +#1850 = CARTESIAN_POINT ( 'NONE', ( -24.24123326523541900, 12.49999753194997400, 15.58364655880696900 ) ) ; +#1851 = AXIS2_PLACEMENT_3D ( 'NONE', #1243, #3756, #1660 ) ; +#1852 = CARTESIAN_POINT ( 'NONE', ( 15.00629313259406100, 2.750779753055784000, -13.86459716126755200 ) ) ; +#1853 = AXIS2_PLACEMENT_3D ( 'NONE', #2694, #409, #3039 ) ; +#1854 = CARTESIAN_POINT ( 'NONE', ( 15.42336318087467200, -11.63176217742977600, -3.575826722854601700 ) ) ; +#1855 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999997800, 2.499997531949971200, -7.834640608427718300 ) ) ; +#1856 = CYLINDRICAL_SURFACE ( 'NONE', #4424, 5.000000000000000000 ) ; +#1857 = LINE ( 'NONE', #3535, #1909 ) ; +#1858 = CARTESIAN_POINT ( 'NONE', ( 13.51493582725272100, -12.69770291065341700, -9.074546611587603500 ) ) ; +#1859 = CARTESIAN_POINT ( 'NONE', ( 1.156718300456777100, -11.26399809558628500, 9.402767209259009100 ) ) ; +#1860 = LINE ( 'NONE', #4585, #1814 ) ; +#1861 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1862 = EDGE_CURVE ( 'NONE', #1601, #2787, #1094, .T. ) ; +#1863 = CARTESIAN_POINT ( 'NONE', ( 13.49236351143173200, -13.34389317736910000, 1.133490602272226900 ) ) ; +#1864 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1865 = CYLINDRICAL_SURFACE ( 'NONE', #4373, 4.999999999999997300 ) ; +#1866 = CARTESIAN_POINT ( 'NONE', ( 1.271005541634556500, -11.44693625557210300, 8.875696879542166700 ) ) ; +#1867 = EDGE_LOOP ( 'NONE', ( #1763, #802, #54, #97 ) ) ; +#1868 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 70.00001676643945800 ) ) ; +#1869 = FACE_OUTER_BOUND ( 'NONE', #2857, .T. ) ; +#1870 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1871 = ORIENTED_EDGE ( 'NONE', *, *, #4512, .F. ) ; +#1872 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1873 = ORIENTED_EDGE ( 'NONE', *, *, #247, .T. ) ; +#1874 = CARTESIAN_POINT ( 'NONE', ( 12.27096455045282400, -11.52963800502610600, -5.552012485819300700 ) ) ; +#1875 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, 2.326349354283042500, -12.93285301449088300 ) ) ; +#1876 = FACE_OUTER_BOUND ( 'NONE', #1079, .T. ) ; +#1877 = ORIENTED_EDGE ( 'NONE', *, *, #758, .F. ) ; +#1878 = VERTEX_POINT ( 'NONE', #3880 ) ; +#1879 = AXIS2_PLACEMENT_3D ( 'NONE', #4102, #2002, #4455 ) ; +#1880 = FACE_OUTER_BOUND ( 'NONE', #369, .T. ) ; +#1881 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1882 = ORIENTED_EDGE ( 'NONE', *, *, #552, .T. ) ; +#1883 = ORIENTED_EDGE ( 'NONE', *, *, #552, .F. ) ; +#1884 = CARTESIAN_POINT ( 'NONE', ( -0.1717602470129550000, -11.63176217742977900, 7.335571684581778700 ) ) ; +#1885 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1886 = CIRCLE ( 'NONE', #4480, 7.499999999999998200 ) ; +#1887 = VERTEX_POINT ( 'NONE', #3518 ) ; +#1888 = ADVANCED_FACE ( 'NONE', ( #3877 ), #2928, .T. ) ; +#1889 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1890 = CARTESIAN_POINT ( 'NONE', ( 15.47896420928051100, -11.62186393045458900, -4.033523875265614400 ) ) ; +#1891 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.499997531949969900, 7.500016766439452800 ) ) ; +#1892 = CARTESIAN_POINT ( 'NONE', ( 1.412070846244345900, -10.07551746472100300, -11.77509448688017100 ) ) ; +#1893 = EDGE_CURVE ( 'NONE', #3283, #621, #4775, .T. ) ; +#1894 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1571, #3685, #1953, #4407, #2295, #4738, #2653, #360, #2994, #778, #3367, #1192, #3771, #1675, #4134, #2028, #4484, #2375 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0005073480468351849500, 0.001014696093670369900, 0.001522044140505554800, 0.002029392187340739800, 0.002536740234175917800, 0.003044088281011096300, 0.003551436327846274300, 0.004058784374681452700 ), + .UNSPECIFIED. ) ; +#1895 = ORIENTED_EDGE ( 'NONE', *, *, #747, .T. ) ; +#1896 = VECTOR ( 'NONE', #560, 1000.000000000000000 ) ; +#1897 = CARTESIAN_POINT ( 'NONE', ( 14.03867652761857300, 3.154487910996993900, 12.46778632675759000 ) ) ; +#1898 = EDGE_CURVE ( 'NONE', #108, #3390, #2004, .T. ) ; +#1899 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 15.00001676643945100 ) ) ; +#1900 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1901 = CARTESIAN_POINT ( 'NONE', ( 13.50000000000000200, 7.380465618997535900, -8.928582119395789700 ) ) ; +#1902 = DATE_TIME_ROLE ( 'creation_date' ) ; +#1903 = AXIS2_PLACEMENT_3D ( 'NONE', #812, #3398, #1229 ) ; +#1904 = CARTESIAN_POINT ( 'NONE', ( 13.30543437088127800, -11.63176217742977800, 5.701588139129598600 ) ) ; +#1905 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1906 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1907 = CARTESIAN_POINT ( 'NONE', ( -0.6698729810778008000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#1908 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -8.189983233560536000 ) ) ; +#1909 = VECTOR ( 'NONE', #1392, 1000.000000000000000 ) ; +#1910 = AXIS2_PLACEMENT_3D ( 'NONE', #3373, #3711, #4425 ) ; +#1911 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -11.44630387609750100, 70.00001676643945800 ) ) ; +#1912 = CARTESIAN_POINT ( 'NONE', ( 15.48170566995090500, 4.695086755236703300, 12.01831109648735400 ) ) ; +#1913 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1914 = CYLINDRICAL_SURFACE ( 'NONE', #386, 5.101600000000001200 ) ; +#1915 = VECTOR ( 'NONE', #3998, 1000.000000000000000 ) ; +#1916 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 6.747595387856067700, -10.47242612937174200 ) ) ; +#1917 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1383, #3901, #1798 ), + ( #4250, #2149, #4597 ), + ( #2491, #164, #2842 ), + ( #584, #3200, #1000 ), + ( #3556, #1422, #3920 ), + ( #1813, #4263, #2166 ), + ( #4612, #2505, #185 ), + ( #2861, #602, #3212 ), + ( #1022, #3574, #1439 ), + ( #3937, #1832, #4282 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001009165671225197600, 0.002018331342450395200, 0.003027497013675592900, 0.004036662684900790500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.5071401350274417100, 1.000000000000000000), + ( 1.000000000000000000, 0.5167307151182366500, 1.000000000000000000), + ( 1.000000000000000000, 0.5305407248069857800, 1.000000000000000000), + ( 1.000000000000000000, 0.5627860077222808200, 1.000000000000000000), + ( 1.000000000000000000, 0.5812064021222775900, 1.000000000000000000), + ( 1.000000000000000000, 0.6194664237076041900, 1.000000000000000000), + ( 1.000000000000000000, 0.6387815310333530000, 1.000000000000000000), + ( 1.000000000000000000, 0.6751333680352184000, 1.000000000000000000), + ( 1.000000000000000000, 0.6922126256419922600, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865465700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1918 = CARTESIAN_POINT ( 'NONE', ( 12.62558644525119400, 7.992437417714995700, -7.581934349603384900 ) ) ; +#1919 = ORIENTED_EDGE ( 'NONE', *, *, #2533, .F. ) ; +#1920 = LINE ( 'NONE', #3289, #1932 ) ; +#1921 = EDGE_CURVE ( 'NONE', #2960, #3072, #4676, .T. ) ; +#1922 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1923 = ORIENTED_EDGE ( 'NONE', *, *, #3955, .F. ) ; +#1924 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999600, -8.543362233758797300, 15.83454037510476400 ) ) ; +#1925 = CARTESIAN_POINT ( 'NONE', ( 17.48190509965576200, 6.868929474346826300, 10.52173064685309500 ) ) ; +#1926 = FACE_OUTER_BOUND ( 'NONE', #3977, .T. ) ; +#1927 = CARTESIAN_POINT ( 'NONE', ( -1.725954982693751700E-014, 23.56714143501161400, 68.18252979751052600 ) ) ; +#1928 = CARTESIAN_POINT ( 'NONE', ( 15.00629313259406100, 2.750779753055783600, -13.86459716126754800 ) ) ; +#1929 = APPROVAL ( #4357, 'UNSPECIFIED' ) ; +#1930 = ORIENTED_EDGE ( 'NONE', *, *, #2214, .F. ) ; +#1931 = EDGE_LOOP ( 'NONE', ( #3004, #3008, #864, #3022 ) ) ; +#1932 = VECTOR ( 'NONE', #1105, 1000.000000000000000 ) ; +#1933 = ORIENTED_EDGE ( 'NONE', *, *, #1666, .F. ) ; +#1934 = ORIENTED_EDGE ( 'NONE', *, *, #30, .T. ) ; +#1935 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1936 = ORIENTED_EDGE ( 'NONE', *, *, #274, .T. ) ; +#1937 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 24.06051080574993500, 65.63282482260056800 ) ) ; +#1938 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949972100, -15.44080068533170500 ) ) ; +#1939 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999800, 24.80998711272850700, 65.73015992574791300 ) ) ; +#1940 = EDGE_LOOP ( 'NONE', ( #2466, #2152, #416, #2963 ) ) ; +#1941 = APPROVAL_PERSON_ORGANIZATION ( #4298, #4728, #1127 ) ; +#1942 = CARTESIAN_POINT ( 'NONE', ( 2.806744952705128200, 21.84417230764268300, 69.71876158708977300 ) ) ; +#1943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#1944 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1945 = VECTOR ( 'NONE', #3378, 1000.000000000000000 ) ; +#1946 = VERTEX_POINT ( 'NONE', #4237 ) ; +#1947 = CARTESIAN_POINT ( 'NONE', ( 12.19325504729982300, 21.84417230764334100, 69.71876158708724300 ) ) ; +#1948 = FACE_OUTER_BOUND ( 'NONE', #4075, .T. ) ; +#1949 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3552, #3197, #2162 ), + ( #4609, #2501, #179 ), + ( #2856, #597, #3209 ), + ( #1016, #3569, #1432 ), + ( #3933, #1827, #4277 ), + ( #2175, #4624, #2515 ), + ( #197, #2874, #618 ), + ( #3225, #1035, #3587 ), + ( #1451, #4628, #345 ), + ( #2986, #766, #3352 ), + ( #1176, #3701, #1592 ), + ( #4060, #1957, #4413 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 1.570796326794896800, 1.926118865607477900, 2.281441404420058800, 2.459102673826349100, 2.636763943232639700, 2.992086482045221100 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 0.9891982913737167300, 1.000000000000000000), + ( 1.000000000000000000, 0.9493427153764477700, 1.000000000000000000), + ( 1.000000000000000000, 0.9202642424762727000, 1.000000000000000000), + ( 1.000000000000000000, 0.8707639227581621700, 1.000000000000000000), + ( 1.000000000000000000, 0.8533429565518995100, 1.000000000000000000), + ( 1.000000000000000000, 0.8186718862880441000, 1.000000000000000000), + ( 1.000000000000000000, 0.8014277510882008600, 1.000000000000000000), + ( 1.000000000000000000, 0.7535529314962097200, 1.000000000000000000), + ( 1.000000000000000000, 0.7269585849864552700, 1.000000000000000000), + ( 1.000000000000000000, 0.7149077045844125500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#1950 = EDGE_CURVE ( 'NONE', #3395, #320, #1366, .T. ) ; +#1951 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1952 = AXIS2_PLACEMENT_3D ( 'NONE', #4762, #2669, #387 ) ; +#1953 = CARTESIAN_POINT ( 'NONE', ( 40.17302545345147300, 12.49999753194997300, 17.16000814530290300 ) ) ; +#1954 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 20.55293979002667400, 65.00001676643944400 ) ) ; +#1955 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.55293979002667700, 65.00001676643944400 ) ) ; +#1956 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 9.099997531949975700, -4.999983233560542800 ) ) ; +#1957 = CARTESIAN_POINT ( 'NONE', ( -0.03431383368676211400, 3.102262623439510300, -12.80032677474095400 ) ) ; +#1958 = DIRECTION ( 'NONE', ( -1.368455531567204200E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#1959 = CARTESIAN_POINT ( 'NONE', ( 13.49999999999999600, 7.404783783242379500, -8.805759462705076100 ) ) ; +#1960 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999500, 20.69171898879593000, 69.00757882248780100 ) ) ; +#1961 = AXIS2_PLACEMENT_3D ( 'NONE', #3772, #408, #3038 ) ; +#1962 = CARTESIAN_POINT ( 'NONE', ( 12.37853365823741200, 23.45780908176348600, 69.03691007533748800 ) ) ; +#1963 = VECTOR ( 'NONE', #521, 1000.000000000000000 ) ; +#1964 = FACE_OUTER_BOUND ( 'NONE', #3379, .T. ) ; +#1965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1966 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 7.499997531949976100, -14.99998323356054400 ) ) ; +#1967 = VECTOR ( 'NONE', #1508, 1000.000000000000000 ) ; +#1968 = CARTESIAN_POINT ( 'NONE', ( 13.44622222222222500, 24.99999753194998300, 69.35280431832386200 ) ) ; +#1969 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.301042606982604100E-015, -1.000000000000000000 ) ) ; +#1970 = LINE ( 'NONE', #271, #1915 ) ; +#1971 = CARTESIAN_POINT ( 'NONE', ( 12.55408413167444700, -11.24972082511623500, -7.771342687188870000 ) ) ; +#1972 = ORIENTED_EDGE ( 'NONE', *, *, #885, .T. ) ; +#1973 = EDGE_CURVE ( 'NONE', #491, #4640, #643, .T. ) ; +#1974 = CIRCLE ( 'NONE', #4520, 2.500000000000000400 ) ; +#1975 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -5.711846095760980000, -9.273070689112936200 ) ) ; +#1976 = VERTEX_POINT ( 'NONE', #2482 ) ; +#1977 = ORIENTED_EDGE ( 'NONE', *, *, #281, .T. ) ; +#1978 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 9.099997531949975700, -4.999983233560542800 ) ) ; +#1979 = VECTOR ( 'NONE', #663, 1000.000000000000000 ) ; +#1980 = EDGE_CURVE ( 'NONE', #3250, #1134, #965, .T. ) ; +#1981 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 8.385741033500860200, -8.999983233560550700 ) ) ; +#1982 = ORIENTED_EDGE ( 'NONE', *, *, #201, .T. ) ; +#1983 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 9.099997531949975700, -4.999983233560542800 ) ) ; +#1984 = ORIENTED_EDGE ( 'NONE', *, *, #294, .T. ) ; +#1985 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1986 = CIRCLE ( 'NONE', #4599, 6.000000000000000000 ) ; +#1987 = ORIENTED_EDGE ( 'NONE', *, *, #1725, .F. ) ; +#1988 = EDGE_LOOP ( 'NONE', ( #4222, #2243, #1727, #761, #4611, #2575, #2816 ) ) ; +#1989 = AXIS2_PLACEMENT_3D ( 'NONE', #4437, #2328, #4766 ) ; +#1990 = CARTESIAN_POINT ( 'NONE', ( -22.49999999999999600, 12.49999753194996900, 15.00001676643945100 ) ) ; +#1991 = CARTESIAN_POINT ( 'NONE', ( 14.18051644166885300, -11.87940718558255200, -11.40912215119376100 ) ) ; +#1992 = LINE ( 'NONE', #1891, #1967 ) ; +#1993 = APPROVAL_DATE_TIME ( #1085, #1929 ) ; +#1994 = ORIENTED_EDGE ( 'NONE', *, *, #1350, .T. ) ; +#1995 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1996 = CYLINDRICAL_SURFACE ( 'NONE', #2021, 50.00000000000000000 ) ; +#1997 = AXIS2_PLACEMENT_3D ( 'NONE', #1613, #4077, #1969 ) ; +#1998 = ORIENTED_EDGE ( 'NONE', *, *, #281, .F. ) ; +#1999 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2000 = CARTESIAN_POINT ( 'NONE', ( 0.6698729810778060200, -11.63176217742977200, -14.39404467726971100 ) ) ; +#2001 = ORIENTED_EDGE ( 'NONE', *, *, #325, .T. ) ; +#2002 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2003 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.734723475976807300E-016 ) ) ; +#2004 = LINE ( 'NONE', #2821, #3751 ) ; +#2005 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 8.333104455336130200, -9.132907820244767500 ) ) ; +#2006 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 12.49999753194997600, -8.999983233560547200 ) ) ; +#2007 = EDGE_CURVE ( 'NONE', #3722, #3250, #2819, .T. ) ; +#2008 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2009 = CARTESIAN_POINT ( 'NONE', ( 13.10214950682955700, -11.63176217742977400, 3.906275432182677600 ) ) ; +#2010 = CARTESIAN_POINT ( 'NONE', ( 14.17277974353504900, 3.830332587471302100, -12.69065748881403100 ) ) ; +#2011 = AXIS2_PLACEMENT_3D ( 'NONE', #4246, #1402, #2837 ) ; +#2012 = CARTESIAN_POINT ( 'NONE', ( 0.002900198683122969300, 2.410360859258522800, -12.91803951947382400 ) ) ; +#2013 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122081300, -0.1736481776669295800 ) ) ; +#2014 = DIRECTION ( 'NONE', ( 0.8948828787403930700, 0.4463010568409033800, 3.096835682620695400E-015 ) ) ; +#2015 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2016 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#2017 = CARTESIAN_POINT ( 'NONE', ( 2.837257108267007900, 6.802665363466131200, -10.38209568421348400 ) ) ; +#2018 = FACE_OUTER_BOUND ( 'NONE', #3815, .T. ) ; +#2019 = CARTESIAN_POINT ( 'NONE', ( 12.45343639722786700, 7.269821101897887800, -9.401515981123784700 ) ) ; +#2020 = VECTOR ( 'NONE', #260, 1000.000000000000000 ) ; +#2021 = AXIS2_PLACEMENT_3D ( 'NONE', #4580, #141, #2472 ) ; +#2022 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999753194998300, 65.73015992574794100 ) ) ; +#2023 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.146386871659068900E-032, -9.912705577010325500E-017 ) ) ; +#2024 = CIRCLE ( 'NONE', #4649, 2.500000000000000400 ) ; +#2025 = ORIENTED_EDGE ( 'NONE', *, *, #201, .F. ) ; +#2026 = CARTESIAN_POINT ( 'NONE', ( 16.51395780924444200, 6.096549534446952900, -12.01789123733427700 ) ) ; +#2027 = LINE ( 'NONE', #3253, #2041 ) ; +#2028 = CARTESIAN_POINT ( 'NONE', ( 37.84056997682937900, 12.49999753194997600, 15.01488450526509200 ) ) ; +#2029 = DIRECTION ( 'NONE', ( -0.2168679678768413700, 0.2591669825001966500, -0.9411698888567950900 ) ) ; +#2030 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -6.955143061973904800, 15.01573401263802400 ) ) ; +#2031 = ORIENTED_EDGE ( 'NONE', *, *, #4276, .F. ) ; +#2032 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2033 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2034 = FACE_OUTER_BOUND ( 'NONE', #1248, .T. ) ; +#2035 = CARTESIAN_POINT ( 'NONE', ( 2.631202062763963800, 8.097382774543380200, -9.499275673957466600 ) ) ; +#2036 = ORIENTED_EDGE ( 'NONE', *, *, #3568, .T. ) ; +#2037 = AXIS2_PLACEMENT_3D ( 'NONE', #2404, #2096, #4549 ) ; +#2038 = CARTESIAN_POINT ( 'NONE', ( 12.52168779058596300, 6.882503634024698300, -10.24263374105124700 ) ) ; +#2039 = VERTEX_POINT ( 'NONE', #2833 ) ; +#2040 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122083500, 0.1736481776669296400 ) ) ; +#2041 = VECTOR ( 'NONE', #1060, 1000.000000000000000 ) ; +#2042 = ORIENTED_EDGE ( 'NONE', *, *, #1748, .T. ) ; +#2043 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2044 = ORIENTED_EDGE ( 'NONE', *, *, #944, .T. ) ; +#2045 = AXIS2_PLACEMENT_3D ( 'NONE', #4592, #2488, #159 ) ; +#2046 = CARTESIAN_POINT ( 'NONE', ( 3.205245365353855300, 7.641760330008560600, -9.964772227997091400 ) ) ; +#2047 = VECTOR ( 'NONE', #1464, 1000.000000000000000 ) ; +#2048 = CARTESIAN_POINT ( 'NONE', ( 19.34848823443202500, 7.499997531949536400, -8.486152373994814400 ) ) ; +#2049 = ORIENTED_EDGE ( 'NONE', *, *, #337, .T. ) ; +#2050 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949969000, 13.50001676643945100 ) ) ; +#2051 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2052 = CARTESIAN_POINT ( 'NONE', ( 12.96796088445979400, 23.59380510570620600, 69.64196688555512100 ) ) ; +#2053 = AXIS2_PLACEMENT_3D ( 'NONE', #257, #1870, #4621 ) ; +#2054 = CARTESIAN_POINT ( 'NONE', ( 12.60160000000000100, 24.99999753194998300, 68.99053987906626200 ) ) ; +#2055 = VERTEX_POINT ( 'NONE', #2582 ) ; +#2056 = LOCAL_TIME ( 15, 8, 41.00000000000000000, #2437 ) ; +#2057 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 7.404783783242380400, -8.805759462705077900 ) ) ; +#2058 = LINE ( 'NONE', #4760, #1222 ) ; +#2059 = EDGE_CURVE ( 'NONE', #3974, #3521, #4581, .T. ) ; +#2060 = CARTESIAN_POINT ( 'NONE', ( 15.22848119907047800, 4.235484539469910100, -15.13478750123694600 ) ) ; +#2061 = ORIENTED_EDGE ( 'NONE', *, *, #237, .F. ) ; +#2062 = CARTESIAN_POINT ( 'NONE', ( 1.795855677261687800, -10.57134785954861100, -10.48729057028360500 ) ) ; +#2063 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #2813, #4204 ) ; +#2064 = CIRCLE ( 'NONE', #1903, 0.9999999999999993300 ) ; +#2065 = CARTESIAN_POINT ( 'NONE', ( 11.78961111370934800, 7.646260260475707500, -9.959821476111075700 ) ) ; +#2066 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -15.22971968983025300, -13.60559462543087200 ) ) ; +#2067 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -13.17394646130280100, 0.0000000000000000000 ) ) ; +#2068 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999997800, 12.49999753194997600, -9.999983233560549000 ) ) ; +#2069 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -9.131762177429775900, -10.17982295743313700 ) ) ; +#2070 = CARTESIAN_POINT ( 'NONE', ( 0.9128476287488566100, -12.01189854471799200, -11.07183020340313300 ) ) ; +#2071 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2072 = EDGE_CURVE ( 'NONE', #306, #31, #799, .T. ) ; +#2073 = LINE ( 'NONE', #1082, #2020 ) ; +#2074 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999994874100, 2.827250477872699000, 12.50001676643944900 ) ) ; +#2075 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 43.36823782257022200, 60.10161676643944900 ) ) ; +#2076 = VECTOR ( 'NONE', #2770, 1000.000000000000000 ) ; +#2077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2078 = VECTOR ( 'NONE', #2523, 1000.000000000000000 ) ; +#2079 = CARTESIAN_POINT ( 'NONE', ( 1.519723418810282200, -11.63176217742977600, 7.500016766439451000 ) ) ; +#2080 = CARTESIAN_POINT ( 'NONE', ( -0.01458520311839230400, 2.915895802111327000, -13.82965986413001500 ) ) ; +#2081 = CARTESIAN_POINT ( 'NONE', ( 13.41004073369502000, -10.31593035308784900, -11.30008195547419800 ) ) ; +#2082 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4309, #2290, #4733 ), + ( #2645, #352, #2989 ), + ( #773, #3361, #1185 ), + ( #3704, #1602, #4067 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 1.570796326794896600, 1.620973824359354300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7081336457189587600, 1.000000000000000000), + ( 1.000000000000000000, 0.7091582711149621000, 1.000000000000000000), + ( 1.000000000000000000, 0.7101794051988764600, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2083 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -6.087887087724744200, -9.342762761780534200 ) ) ; +#2084 = CYLINDRICAL_SURFACE ( 'NONE', #4654, 2.500000000000000000 ) ; +#2085 = CARTESIAN_POINT ( 'NONE', ( 4.089049192415191500, 21.18645551280095400, 69.33812950579714100 ) ) ; +#2086 = CARTESIAN_POINT ( 'NONE', ( -0.04508695993555626000, -10.46329460135802100, -10.90910041562409200 ) ) ; +#2087 = CARTESIAN_POINT ( 'NONE', ( -7.819215245988622700E-014, -9.459328318975190400, -14.02120956068844000 ) ) ; +#2088 = LINE ( 'NONE', #207, #2047 ) ; +#2089 = EDGE_LOOP ( 'NONE', ( #4710, #3795, #884, #4402 ) ) ; +#2090 = CARTESIAN_POINT ( 'NONE', ( -0.6608420055256378800, 5.005750903667764500, 12.70700635980838600 ) ) ; +#2091 = LINE ( 'NONE', #2878, #2078 ) ; +#2092 = ORIENTED_EDGE ( 'NONE', *, *, #1316, .T. ) ; +#2093 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2094 = ORIENTED_EDGE ( 'NONE', *, *, #1862, .T. ) ; +#2095 = CARTESIAN_POINT ( 'NONE', ( 4.309224781860502100, 20.33509968220043600, 69.96256812098701500 ) ) ; +#2096 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2097 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2098 = VECTOR ( 'NONE', #3214, 1000.000000000000000 ) ; +#2099 = ORIENTED_EDGE ( 'NONE', *, *, #1589, .T. ) ; +#2100 = ORIENTED_EDGE ( 'NONE', *, *, #885, .F. ) ; +#2101 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 9.099997531949975700, -4.999983233560542800 ) ) ; +#2102 = CARTESIAN_POINT ( 'NONE', ( 0.1526524083335743000, -10.39426744980592700, -13.33324845525468800 ) ) ; +#2103 = LINE ( 'NONE', #513, #2098 ) ; +#2104 = EDGE_CURVE ( 'NONE', #2594, #35, #2704, .T. ) ; +#2105 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.715916581326906600, -15.40272833127762900 ) ) ; +#2106 = VERTEX_POINT ( 'NONE', #4688 ) ; +#2107 = ORIENTED_EDGE ( 'NONE', *, *, #348, .T. ) ; +#2108 = FACE_OUTER_BOUND ( 'NONE', #3014, .T. ) ; +#2109 = CARTESIAN_POINT ( 'NONE', ( -2.243654121918492900, 6.742525163698053000, 10.25636264451953200 ) ) ; +#2110 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#2111 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#2112 = ORIENTED_EDGE ( 'NONE', *, *, #4591, .F. ) ; +#2113 = AXIS2_PLACEMENT_3D ( 'NONE', #3081, #873, #3449 ) ; +#2114 = VECTOR ( 'NONE', #2656, 1000.000000000000000 ) ; +#2115 = CARTESIAN_POINT ( 'NONE', ( 0.6698729810778060200, -11.63176217742977200, -14.39404467726971100 ) ) ; +#2116 = CARTESIAN_POINT ( 'NONE', ( 14.02012029300755300, -12.16870957740201200, -13.80473500004500100 ) ) ; +#2117 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000000, 2.499997531949969900, 12.50001676643945100 ) ) ; +#2118 = ORIENTED_EDGE ( 'NONE', *, *, #356, .T. ) ; +#2119 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, 26.77590825245414800, 41.25001676643945100 ) ) ; +#2120 = AXIS2_PLACEMENT_3D ( 'NONE', #566, #3175, #979 ) ; +#2121 = CARTESIAN_POINT ( 'NONE', ( 2.147837694000064500, -13.45141961289823100, -3.625349612777101900 ) ) ; +#2122 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2123 = ORIENTED_EDGE ( 'NONE', *, *, #3736, .F. ) ; +#2124 = FACE_OUTER_BOUND ( 'NONE', #4353, .T. ) ; +#2125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2126 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2127 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2128 = EDGE_CURVE ( 'NONE', #3283, #4435, #835, .T. ) ; +#2129 = CARTESIAN_POINT ( 'NONE', ( 2.730591245835535900, -11.53166757055899300, -5.529637589423385800 ) ) ; +#2130 = CARTESIAN_POINT ( 'NONE', ( 12.79902515395022500, -13.43289210356088700, -4.529094344835867100 ) ) ; +#2131 = CIRCLE ( 'NONE', #4697, 1.000000000000000700 ) ; +#2132 = EDGE_CURVE ( 'NONE', #2968, #4001, #3543, .T. ) ; +#2133 = LINE ( 'NONE', #2424, #2076 ) ; +#2134 = LINE ( 'NONE', #2922, #1979 ) ; +#2135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #4605, #4259, #2497, #174, #2851, #593, #3206, #1010, #3564, #1427, #3929, #1823, #4271, #2172 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004735906224732426300, 0.0009471812449464852500, 0.001420771867419728000, 0.001894362489892970500, 0.002841543734839456000, 0.003788724979785941000 ), + .UNSPECIFIED. ) ; +#2136 = CARTESIAN_POINT ( 'NONE', ( 0.9330685250265695600, 3.244746686838853000, -12.77886437928318800 ) ) ; +#2137 = CIRCLE ( 'NONE', #4674, 1.200000000000005700 ) ; +#2138 = CARTESIAN_POINT ( 'NONE', ( 13.01033175431124500, 22.80325184458607200, 69.45347470166005600 ) ) ; +#2139 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2140 = ORIENTED_EDGE ( 'NONE', *, *, #3044, .T. ) ; +#2141 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2142 = CARTESIAN_POINT ( 'NONE', ( -0.2050123642208722400, -11.32911757543596600, -7.231046762861304000 ) ) ; +#2143 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2144 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 12.49999753194997600, -4.999983233560542800 ) ) ; +#2145 = VECTOR ( 'NONE', #60, 1000.000000000000000 ) ; +#2146 = AXIS2_PLACEMENT_3D ( 'NONE', #3112, #96, #497 ) ; +#2147 = CIRCLE ( 'NONE', #4711, 7.499999999999998200 ) ; +#2148 = ORIENTED_EDGE ( 'NONE', *, *, #1, .F. ) ; +#2149 = CARTESIAN_POINT ( 'NONE', ( 15.15726069158231800, -11.64089155868304600, 7.568589601341628300 ) ) ; +#2150 = ORIENTED_EDGE ( 'NONE', *, *, #376, .T. ) ; +#2151 = VECTOR ( 'NONE', #1309, 1000.000000000000000 ) ; +#2152 = ORIENTED_EDGE ( 'NONE', *, *, #1781, .T. ) ; +#2153 = CARTESIAN_POINT ( 'NONE', ( 4.306574359969444800, 20.33692670505055500, 69.96202327697822900 ) ) ; +#2154 = VERTEX_POINT ( 'NONE', #4387 ) ; +#2155 = CARTESIAN_POINT ( 'NONE', ( 11.19075154318586000, 21.45633939124663300, 69.28006509138819500 ) ) ; +#2156 = DIRECTION ( 'NONE', ( 1.734723475976807300E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#2157 = LINE ( 'NONE', #3465, #2151 ) ; +#2158 = CARTESIAN_POINT ( 'NONE', ( 4.397918137561991800, 20.94988510403725400, 69.40784625110310900 ) ) ; +#2159 = CARTESIAN_POINT ( 'NONE', ( 3.988468512680289900, 21.27307873965989100, 69.98509549265891400 ) ) ; +#2160 = ORIENTED_EDGE ( 'NONE', *, *, #1254, .F. ) ; +#2161 = EDGE_CURVE ( 'NONE', #2960, #2594, #2596, .T. ) ; +#2162 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999997300, 7.499997531949972500, -7.834640608427718300 ) ) ; +#2163 = ORIENTED_EDGE ( 'NONE', *, *, #1921, .F. ) ; +#2164 = DATE_AND_TIME ( #1275, #1210 ) ; +#2165 = ADVANCED_FACE ( 'NONE', ( #706 ), #335, .F. ) ; +#2166 = CARTESIAN_POINT ( 'NONE', ( 14.80443928782587000, -12.46511101076539200, 9.730803045532304900 ) ) ; +#2167 = AXIS2_PLACEMENT_3D ( 'NONE', #3915, #1809, #4262 ) ; +#2168 = ORIENTED_EDGE ( 'NONE', *, *, #685, .F. ) ; +#2169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2170 = CIRCLE ( 'NONE', #1989, 1.000000000000000900 ) ; +#2171 = CARTESIAN_POINT ( 'NONE', ( 15.06317475695784000, -9.556013020077340800, -12.49445039324574800 ) ) ; +#2172 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -14.13176217742977400, -11.35960056912454300 ) ) ; +#2173 = AXIS2_PLACEMENT_3D ( 'NONE', #898, #3097, #1722 ) ; +#2174 = CARTESIAN_POINT ( 'NONE', ( 1.991255176368126500, 22.79961045726294300, 69.45383763427737700 ) ) ; +#2175 = CARTESIAN_POINT ( 'NONE', ( -1.513957809244454600, 6.096549534446961800, -12.01789123733426300 ) ) ; +#2176 = CARTESIAN_POINT ( 'NONE', ( -0.1717602470129248300, -11.63176217742977600, 7.335571684581781300 ) ) ; +#2177 = CIRCLE ( 'NONE', #4735, 1.000000000000000700 ) ; +#2178 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#2179 = CARTESIAN_POINT ( 'NONE', ( 14.27515211969119900, -11.73304860615046900, -11.69064509534757500 ) ) ; +#2180 = ADVANCED_FACE ( 'NONE', ( #1670 ), #2980, .F. ) ; +#2181 = EDGE_CURVE ( 'NONE', #320, #2901, #4679, .T. ) ; +#2182 = VECTOR ( 'NONE', #1633, 1000.000000000000000 ) ; +#2183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122081300, 0.1736481776669296700 ) ) ; +#2184 = TOROIDAL_SURFACE ( 'NONE', #4730, 6.000000000000000000, 1.000000000000000000 ) ; +#2185 = CARTESIAN_POINT ( 'NONE', ( 1.636682800179235500, -13.36851116822033700, 0.2397958138943084000 ) ) ; +#2186 = VECTOR ( 'NONE', #4153, 1000.000000000000000 ) ; +#2187 = AXIS2_PLACEMENT_3D ( 'NONE', #3132, #924, #3496 ) ; +#2188 = CARTESIAN_POINT ( 'NONE', ( 1.790833836565993900, 7.143976921275723600, -9.700481655861889200 ) ) ; +#2189 = CARTESIAN_POINT ( 'NONE', ( -24.60978329886245000, 12.49999753194997100, 15.93562521007699900 ) ) ; +#2190 = FACE_OUTER_BOUND ( 'NONE', #3242, .T. ) ; +#2191 = CARTESIAN_POINT ( 'NONE', ( 15.07908012879651200, -10.85326599177283000, -9.483526948552249500 ) ) ; +#2192 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2193 = ORIENTED_EDGE ( 'NONE', *, *, #384, .T. ) ; +#2194 = AXIS2_PLACEMENT_3D ( 'NONE', #910, #3481, #1323 ) ; +#2195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#2196 = CIRCLE ( 'NONE', #2113, 2.500000000000000000 ) ; +#2197 = ORIENTED_EDGE ( 'NONE', *, *, #308, .T. ) ; +#2198 = ORIENTED_EDGE ( 'NONE', *, *, #389, .T. ) ; +#2199 = PLANE ( 'NONE', #4630 ) ; +#2200 = CARTESIAN_POINT ( 'NONE', ( 12.39626005515320300, -11.63176217742977200, -2.377905551731849700 ) ) ; +#2201 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2202 = LINE ( 'NONE', #468, #2145 ) ; +#2203 = ORIENTED_EDGE ( 'NONE', *, *, #1277, .F. ) ; +#2204 = ORIENTED_EDGE ( 'NONE', *, *, #581, .F. ) ; +#2205 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -5.711846095760980000, -9.273070689112936200 ) ) ; +#2206 = DIRECTION ( 'NONE', ( 8.673617379884035500E-017, -5.290906601729261600E-015, 1.000000000000000000 ) ) ; +#2207 = ADVANCED_FACE ( 'NONE', ( #4366 ), #1790, .T. ) ; +#2208 = TOROIDAL_SURFACE ( 'NONE', #4753, 6.000000000000000000, 1.000000000000000000 ) ; +#2209 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, -14.13176217742977400, -11.35960056912454300 ) ) ; +#2210 = VERTEX_POINT ( 'NONE', #774 ) ; +#2211 = ORIENTED_EDGE ( 'NONE', *, *, #456, .T. ) ; +#2212 = CARTESIAN_POINT ( 'NONE', ( 15.20399734511425300, -11.32744503141834300, -7.240966643695548700 ) ) ; +#2213 = CARTESIAN_POINT ( 'NONE', ( 1.025677049530782500, -10.88480770285726400, 10.14365916719888000 ) ) ; +#2214 = EDGE_CURVE ( 'NONE', #1092, #2458, #574, .T. ) ; +#2215 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#2216 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2217 = ORIENTED_EDGE ( 'NONE', *, *, #944, .F. ) ; +#2218 = FACE_BOUND ( 'NONE', #3619, .T. ) ; +#2219 = CARTESIAN_POINT ( 'NONE', ( 15.16337718349686800, -11.63176217742977100, 3.525698087134088600 ) ) ; +#2220 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2221 = ORIENTED_EDGE ( 'NONE', *, *, #500, .T. ) ; +#2222 = EDGE_CURVE ( 'NONE', #1887, #1329, #3436, .T. ) ; +#2223 = CARTESIAN_POINT ( 'NONE', ( 0.3387569302304634900, -12.76808071336086500, 9.082657886450240500 ) ) ; +#2224 = CARTESIAN_POINT ( 'NONE', ( 17.40718079839334800, 7.499997531949972500, -10.94602365035570200 ) ) ; +#2225 = ORIENTED_EDGE ( 'NONE', *, *, #523, .T. ) ; +#2226 = CARTESIAN_POINT ( 'NONE', ( 15.96315329583441300, 7.499997531949971700, -7.834640608427718300 ) ) ; +#2227 = CARTESIAN_POINT ( 'NONE', ( 12.83870568784037800, -13.34798076750371700, -5.679713862001498200 ) ) ; +#2228 = CARTESIAN_POINT ( 'NONE', ( 11.00679128130450300, 20.55293979002667400, 69.89760508273241200 ) ) ; +#2229 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2230 = CIRCLE ( 'NONE', #498, 5.101600000000001200 ) ; +#2231 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #2576 ) ; +#2232 = LINE ( 'NONE', #1291, #2186 ) ; +#2233 = CARTESIAN_POINT ( 'NONE', ( 12.28160803280362900, -11.63176217742977600, -3.561857264399537600 ) ) ; +#2234 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000004400, -10.55229541076278600, 10.60314730934792000 ) ) ; +#2235 = CARTESIAN_POINT ( 'NONE', ( 1.730278102999083200, -10.48186707534378600, -10.77203695102143200 ) ) ; +#2236 = CIRCLE ( 'NONE', #661, 3.189999999999994200 ) ; +#2237 = FACE_OUTER_BOUND ( 'NONE', #1415, .T. ) ; +#2238 = VECTOR ( 'NONE', #116, 1000.000000000000000 ) ; +#2239 = EDGE_CURVE ( 'NONE', #4659, #4229, #3811, .T. ) ; +#2240 = CARTESIAN_POINT ( 'NONE', ( 15.03223043968185900, 3.154487910996976600, 13.46134023882122600 ) ) ; +#2241 = FACE_OUTER_BOUND ( 'NONE', #3456, .T. ) ; +#2242 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2243 = ORIENTED_EDGE ( 'NONE', *, *, #1285, .T. ) ; +#2244 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999994700, -114.1317621774297500, -10.17982295743315100 ) ) ; +#2245 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #4510, #2060, #2398, #62 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.188790204786390500, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9772838841927120600, 0.9772838841927120600, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2247 = CYLINDRICAL_SURFACE ( 'NONE', #3845, 7.499999999999996400 ) ; +#2248 = APPROVAL_ROLE ( '' ) ; +#2249 = ORIENTED_EDGE ( 'NONE', *, *, #3392, .F. ) ; +#2250 = CARTESIAN_POINT ( 'NONE', ( 1.000000009526502000, -10.72941955460686900, 10.37936649098907300 ) ) ; +#2251 = CIRCLE ( 'NONE', #4759, 0.9999999999999997800 ) ; +#2252 = EDGE_LOOP ( 'NONE', ( #1484, #1515, #1542, #1574 ) ) ; +#2253 = VERTEX_POINT ( 'NONE', #3734 ) ; +#2254 = FACE_OUTER_BOUND ( 'NONE', #2756, .T. ) ; +#2255 = DIRECTION ( 'NONE', ( 1.000000000000000000, 5.105013276988866000E-016, -0.0000000000000000000 ) ) ; +#2256 = ORIENTED_EDGE ( 'NONE', *, *, #2007, .F. ) ; +#2257 = CARTESIAN_POINT ( 'NONE', ( 1.932334118604964100, -10.73463500113415300, -9.914337676050291000 ) ) ; +#2258 = CARTESIAN_POINT ( 'NONE', ( 15.22935424573905800, 5.549946490428097500, 11.47555489499060300 ) ) ; +#2259 = ORIENTED_EDGE ( 'NONE', *, *, #2584, .T. ) ; +#2260 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999997800, 7.499997531949971700, -7.834640608427718300 ) ) ; +#2261 = CARTESIAN_POINT ( 'NONE', ( 13.39232219407197300, 24.10947857090725300, 69.36540430372772900 ) ) ; +#2262 = LINE ( 'NONE', #952, #2238 ) ; +#2263 = ORIENTED_EDGE ( 'NONE', *, *, #1496, .F. ) ; +#2264 = LOCAL_TIME ( 15, 8, 41.00000000000000000, #2649 ) ; +#2265 = LINE ( 'NONE', #2775, #2814 ) ; +#2266 = CARTESIAN_POINT ( 'NONE', ( 12.86438553283207600, 7.717974914839357900, -7.740569258317668400 ) ) ; +#2267 = ORIENTED_EDGE ( 'NONE', *, *, #533, .T. ) ; +#2268 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 12.49999753194997600, -9.999983233560547200 ) ) ; +#2269 = VERTEX_POINT ( 'NONE', #3388 ) ; +#2270 = CARTESIAN_POINT ( 'NONE', ( 2.824675324675324500, -10.69511892927340400, 161.9249932573022800 ) ) ; +#2271 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000700, -8.839738997623475900, 16.23209560197044600 ) ) ; +#2272 = CIRCLE ( 'NONE', #1786, 1.000000000000000000 ) ; +#2273 = CARTESIAN_POINT ( 'NONE', ( 18.54458148243518800, 7.335471568567009500, 8.955435284003364400 ) ) ; +#2274 = AXIS2_PLACEMENT_3D ( 'NONE', #3579, #3939, #1027 ) ; +#2275 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 23.70139134818924000, 65.55417217943620800 ) ) ; +#2276 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999800, -23.22509174754585700, 6.500016766439451000 ) ) ; +#2277 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 23.56714143501160300, 68.18252979750765500 ) ) ; +#2278 = AXIS2_PLACEMENT_3D ( 'NONE', #3239, #1049, #3598 ) ; +#2279 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 70.00001676643945800 ) ) ; +#2280 = CIRCLE ( 'NONE', #4672, 45.00000000000000700 ) ; +#2281 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 24.62012815553433100, 65.71650768896000700 ) ) ; +#2282 = VECTOR ( 'NONE', #2795, 1000.000000000000000 ) ; +#2283 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2284 = CARTESIAN_POINT ( 'NONE', ( -1.407275736013457100E-013, 21.63440936017072900, 68.53574555367288200 ) ) ; +#2285 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#2286 = FACE_OUTER_BOUND ( 'NONE', #887, .T. ) ; +#2287 = LINE ( 'NONE', #1767, #2297 ) ; +#2288 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 22.96671093411200800, 65.36592879827399800 ) ) ; +#2289 = VECTOR ( 'NONE', #4556, 1000.000000000000000 ) ; +#2290 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.326349354283042000, -12.93285301449088500 ) ) ; +#2291 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -5.711846095760980000, -9.273070689112936200 ) ) ; +#2292 = LINE ( 'NONE', #2446, #2282 ) ; +#2293 = EDGE_CURVE ( 'NONE', #2426, #31, #2058, .T. ) ; +#2294 = ORIENTED_EDGE ( 'NONE', *, *, #568, .T. ) ; +#2295 = CARTESIAN_POINT ( 'NONE', ( 40.04456844397058300, 12.49999753194997300, 16.66548305342659800 ) ) ; +#2296 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2297 = VECTOR ( 'NONE', #4217, 1000.000000000000000 ) ; +#2298 = CARTESIAN_POINT ( 'NONE', ( 4.052609333348066800, 20.55293979002668100, 69.90944147048989500 ) ) ; +#2299 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2300 = ORIENTED_EDGE ( 'NONE', *, *, #3652, .F. ) ; +#2301 = VERTEX_POINT ( 'NONE', #2332 ) ; +#2302 = AXIS2_PLACEMENT_3D ( 'NONE', #3470, #1313, #3820 ) ; +#2303 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1835, #4771, #820, #3404 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 9.641477753074291400E-018, 0.0009835880167519529900 ), + .UNSPECIFIED. ) ; +#2304 = VECTOR ( 'NONE', #3498, 1000.000000000000000 ) ; +#2305 = CARTESIAN_POINT ( 'NONE', ( 10.94739066665825100, 20.55293979002667400, 69.90944147048865900 ) ) ; +#2306 = VERTEX_POINT ( 'NONE', #4087 ) ; +#2307 = ORIENTED_EDGE ( 'NONE', *, *, #1337, .T. ) ; +#2308 = CARTESIAN_POINT ( 'NONE', ( 12.60160000000001400, 24.60469371830058800, 68.99053987906702900 ) ) ; +#2309 = LINE ( 'NONE', #4542, #2304 ) ; +#2310 = VERTEX_POINT ( 'NONE', #4445 ) ; +#2311 = AXIS2_PLACEMENT_3D ( 'NONE', #2864, #607, #3216 ) ; +#2312 = ORIENTED_EDGE ( 'NONE', *, *, #3490, .F. ) ; +#2313 = PLANE ( 'NONE', #13 ) ; +#2314 = ORIENTED_EDGE ( 'NONE', *, *, #617, .T. ) ; +#2315 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 9.099997531949975700, -7.485159283662421900 ) ) ; +#2316 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2317 = CYLINDRICAL_SURFACE ( 'NONE', #1215, 1.000000000000000700 ) ; +#2318 = CARTESIAN_POINT ( 'NONE', ( 13.06766588139503700, -10.73463500113415100, -9.914337676050291000 ) ) ; +#2319 = ORIENTED_EDGE ( 'NONE', *, *, #627, .T. ) ; +#2320 = CARTESIAN_POINT ( 'NONE', ( 10.90611215317413000, 20.55293979002798500, 69.40784625110309500 ) ) ; +#2321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.335737076502141800E-014, -1.000000000000000000 ) ) ; +#2322 = VERTEX_POINT ( 'NONE', #4773 ) ; +#2323 = EDGE_CURVE ( 'NONE', #4716, #2594, #899, .T. ) ; +#2324 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2325 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, -13.17394646130280100, 161.9249932573022800 ) ) ; +#2326 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2327 = AXIS2_PLACEMENT_3D ( 'NONE', #2526, #4442, #2330 ) ; +#2328 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2329 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -9.131762177429775900, -14.20299705715771300 ) ) ; +#2330 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2331 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.583635469084850600, -13.89996361758988100 ) ) ; +#2332 = CARTESIAN_POINT ( 'NONE', ( 12.60160000000000100, 24.99999753194998300, 67.50001676643944400 ) ) ; +#2333 = VECTOR ( 'NONE', #926, 1000.000000000000000 ) ; +#2334 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 20.55293979002667400, 65.00001676643944400 ) ) ; +#2335 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 24.99999753194998300, 70.00001676643945800 ) ) ; +#2336 = LINE ( 'NONE', #3851, #2333 ) ; +#2337 = CARTESIAN_POINT ( 'NONE', ( 14.39455931351468900, -13.10170893511356000, 7.780243212517962800 ) ) ; +#2338 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -11.63176217742977400, -3.277205641478954800 ) ) ; +#2339 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999999600, -23.22509174754585700, 6.500016766439451000 ) ) ; +#2340 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2341 = CIRCLE ( 'NONE', #4156, 6.000000000000000000 ) ; +#2342 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2343 = CARTESIAN_POINT ( 'NONE', ( 3.431567578177298700, 7.597114963539175900, -9.999983233560549000 ) ) ; +#2344 = VERTEX_POINT ( 'NONE', #398 ) ; +#2345 = EDGE_CURVE ( 'NONE', #4239, #4435, #2489, .T. ) ; +#2346 = CARTESIAN_POINT ( 'NONE', ( 13.49999998402024000, 7.360895088588841300, -9.027426115736981100 ) ) ; +#2347 = TOROIDAL_SURFACE ( 'NONE', #3607, 32.50000000000000000, 2.500000000000000000 ) ; +#2348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2349 = ORIENTED_EDGE ( 'NONE', *, *, #1529, .F. ) ; +#2350 = CIRCLE ( 'NONE', #153, 100.0000000000000000 ) ; +#2351 = EDGE_CURVE ( 'NONE', #3100, #3686, #2869, .T. ) ; +#2352 = CARTESIAN_POINT ( 'NONE', ( 12.48251740657119100, -11.63176217742977400, -1.478604597545522200 ) ) ; +#2353 = ORIENTED_EDGE ( 'NONE', *, *, #4643, .T. ) ; +#2354 = CARTESIAN_POINT ( 'NONE', ( 15.20799553685427500, 4.078404084382176700, -12.62664507157415600 ) ) ; +#2355 = ORIENTED_EDGE ( 'NONE', *, *, #666, .T. ) ; +#2356 = CARTESIAN_POINT ( 'NONE', ( 14.59975667454055600, -12.86514985758630500, 8.818245684333707100 ) ) ; +#2357 = CARTESIAN_POINT ( 'NONE', ( -8.673617379884035500E-016, 2.499997531949975600, -13.91766076750309400 ) ) ; +#2358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2000, #405, #3037, #829, #3414, #1240, #3754, #1657 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001586730227480935300, 0.002380095341221400100, 0.003173460454961865000 ), + .UNSPECIFIED. ) ; +#2359 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.186988295993375100, 17.50001676643945100 ) ) ; +#2360 = FACE_OUTER_BOUND ( 'NONE', #161, .T. ) ; +#2361 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -4.669957029759403100, -15.18191720718618700 ) ) ; +#2362 = VERTEX_POINT ( 'NONE', #2701 ) ; +#2363 = ORIENTED_EDGE ( 'NONE', *, *, #2128, .T. ) ; +#2364 = AXIS2_PLACEMENT_3D ( 'NONE', #243, #2900, #657 ) ; +#2365 = CARTESIAN_POINT ( 'NONE', ( 2.830184795782936900, 7.137212217843645200, -9.782010090029860500 ) ) ; +#2366 = FACE_OUTER_BOUND ( 'NONE', #1931, .T. ) ; +#2367 = CYLINDRICAL_SURFACE ( 'NONE', #991, 36.00000000000000000 ) ; +#2368 = CARTESIAN_POINT ( 'NONE', ( 12.25698470177525800, 7.965107705448880400, -9.656538634224205000 ) ) ; +#2369 = ORIENTED_EDGE ( 'NONE', *, *, #4689, .F. ) ; +#2370 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2371 = ORIENTED_EDGE ( 'NONE', *, *, #3538, .T. ) ; +#2372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2373 = CARTESIAN_POINT ( 'NONE', ( 15.81674937109343800, 6.096549534446952900, -11.32068279918327600 ) ) ; +#2374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.3428655981591505200, 0.9393844695325595000 ) ) ; +#2375 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, 12.49999753194997300, 15.00001676643945100 ) ) ; +#2376 = PLANE ( 'NONE', #2431 ) ; +#2377 = EDGE_LOOP ( 'NONE', ( #2487, #2522, #2542, #2684 ) ) ; +#2378 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -5.006327233685850000, -16.76436826747344400 ) ) ; +#2379 = CARTESIAN_POINT ( 'NONE', ( 1.706484653927567300E-018, -6.622779069733818200, 15.00001676643945100 ) ) ; +#2380 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 9.099997531949975700, -4.999983233560542800 ) ) ; +#2381 = CYLINDRICAL_SURFACE ( 'NONE', #2063, 25.00000000000000000 ) ; +#2382 = CARTESIAN_POINT ( 'NONE', ( 1.762404124608762900, 7.164485235497478400, -9.637913531108203800 ) ) ; +#2383 = CARTESIAN_POINT ( 'NONE', ( 12.09227439628996800, 7.118821351682771400, -9.824826385166920400 ) ) ; +#2384 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2385 = EDGE_CURVE ( 'NONE', #2253, #499, #2763, .T. ) ; +#2386 = CARTESIAN_POINT ( 'NONE', ( 13.97443445931359200, -10.88416333613993500, 10.14465073590018200 ) ) ; +#2387 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1408, #203, #1041, #3593, #1459, #3950, #1850, #4301, #2189, #4637, #2539, #222, #2891, #646, #3249, #1057 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001014695419246172200, 0.001522043128869258400, 0.002029390838492344400, 0.002536738548115434300, 0.003044086257738524200, 0.003551433967361613700, 0.004058781676984703600 ), + .UNSPECIFIED. ) ; +#2388 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999997800, 7.597114959037287300, -9.999983233560549000 ) ) ; +#2389 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #3136, #4685, ( #1421 ) ) ; +#2390 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949972500, -7.834640608427712900 ) ) ; +#2391 = FACE_OUTER_BOUND ( 'NONE', #3916, .T. ) ; +#2392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122082400, 0.1736481776669298900 ) ) ; +#2393 = FACE_OUTER_BOUND ( 'NONE', #1735, .T. ) ; +#2394 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2395 = CARTESIAN_POINT ( 'NONE', ( 1.932334118604964100, -10.73463500113415300, -9.914337676050291000 ) ) ; +#2396 = VECTOR ( 'NONE', #404, 1000.000000000000000 ) ; +#2397 = CYLINDRICAL_SURFACE ( 'NONE', #1272, 3.189999999999994200 ) ; +#2398 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000200, 3.382781095964637200, -15.28514212486994200 ) ) ; +#2399 = CARTESIAN_POINT ( 'NONE', ( 0.9948195324040315400, -12.12822347440028300, -10.77569419698720300 ) ) ; +#2400 = FACE_OUTER_BOUND ( 'NONE', #4072, .T. ) ; +#2401 = CARTESIAN_POINT ( 'NONE', ( 11.97560787909554100, 7.736493849808409700, -9.882164852156824600 ) ) ; +#2402 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2403 = CIRCLE ( 'NONE', #1805, 1.000000000000000700 ) ; +#2404 = CARTESIAN_POINT ( 'NONE', ( 73.21443512576246300, -114.1317621774297500, -10.17982295743315100 ) ) ; +#2405 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2406 = ORIENTED_EDGE ( 'NONE', *, *, #691, .T. ) ; +#2407 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2408 = CARTESIAN_POINT ( 'NONE', ( 2.398399999999998300, 24.60466375589129800, 68.99053987906626200 ) ) ; +#2409 = FACE_OUTER_BOUND ( 'NONE', #3984, .T. ) ; +#2410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2411 = ORIENTED_EDGE ( 'NONE', *, *, #1973, .F. ) ; +#2412 = EDGE_CURVE ( 'NONE', #2743, #2474, #3698, .T. ) ; +#2413 = EDGE_LOOP ( 'NONE', ( #4178, #2411, #2300, #4289 ) ) ; +#2414 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -1.734723475976807300E-016 ) ) ; +#2415 = VECTOR ( 'NONE', #3865, 1000.000000000000000 ) ; +#2416 = AXIS2_PLACEMENT_3D ( 'NONE', #1651, #4108, #2008 ) ; +#2417 = ORIENTED_EDGE ( 'NONE', *, *, #1619, .T. ) ; +#2418 = CARTESIAN_POINT ( 'NONE', ( -0.01809203761421992700, 3.020815579722389000, 12.48192472882604600 ) ) ; +#2419 = EDGE_LOOP ( 'NONE', ( #435, #440, #476, #493, #511, #547, #565, #572 ) ) ; +#2420 = AXIS2_PLACEMENT_3D ( 'NONE', #4266, #2169, #4615 ) ; +#2421 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #383, #4082, #1616, #3015, #795, #3385, #1217, #3728, #1628, #4093, #1991, #4440 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001105510745815616400, 0.001658266118723422400, 0.002211021491631228900, 0.003316532237446840900, 0.004422042983262453400 ), + .UNSPECIFIED. ) ; +#2422 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949969900, 7.500016766439451900 ) ) ; +#2423 = CIRCLE ( 'NONE', #1551, 100.0000000000000000 ) ; +#2424 = CARTESIAN_POINT ( 'NONE', ( -2.451317577940646100E-015, 12.49999753194997400, 15.00001676643945100 ) ) ; +#2425 = CARTESIAN_POINT ( 'NONE', ( 0.8671085875801122200, -13.19445418295181000, 5.621175387801164500 ) ) ; +#2426 = VERTEX_POINT ( 'NONE', #3761 ) ; +#2427 = CARTESIAN_POINT ( 'NONE', ( -0.01290840117268454200, 2.927974560993003900, -12.82779171207939800 ) ) ; +#2428 = CARTESIAN_POINT ( 'NONE', ( 13.80980395434169200, -9.591937533359750700, -12.43844898318134700 ) ) ; +#2429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2430 = ORIENTED_EDGE ( 'NONE', *, *, #1608, .F. ) ; +#2431 = AXIS2_PLACEMENT_3D ( 'NONE', #4135, #869, #3444 ) ; +#2432 = VERTEX_POINT ( 'NONE', #2022 ) ; +#2433 = CARTESIAN_POINT ( 'NONE', ( 1.417577105248784700, -10.05117702209144400, -11.77180319815260600 ) ) ; +#2434 = LINE ( 'NONE', #4123, #505 ) ; +#2435 = ORIENTED_EDGE ( 'NONE', *, *, #570, .T. ) ; +#2436 = CARTESIAN_POINT ( 'NONE', ( 0.2069895933693246500, 5.005750903667697900, 11.83917476091385800 ) ) ; +#2437 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#2438 = ORIENTED_EDGE ( 'NONE', *, *, #699, .T. ) ; +#2439 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2440 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -13.17394646130280100, 60.10161676643944900 ) ) ; +#2441 = EDGE_CURVE ( 'NONE', #3628, #3299, #2778, .T. ) ; +#2442 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3092, #888, #4162, #2065, #4517, #2401, #67, #2757, #480, #3102, #906, #3477, #1319, #3823 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0002231481913613319400, 0.0004462963827226638900, 0.0006694445740839957800, 0.0008925927654453263700, 0.001338889148167987400, 0.001785185530890648400 ), + .UNSPECIFIED. ) ; +#2443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2444 = CARTESIAN_POINT ( 'NONE', ( -0.05495146768832722500, -9.100982309729971600, -12.96411426011030700 ) ) ; +#2445 = CARTESIAN_POINT ( 'NONE', ( 15.08434860775260100, -10.59679438197409200, -10.40631446767779300 ) ) ; +#2446 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 9.099997531949975700, -9.999983233560550700 ) ) ; +#2447 = EDGE_CURVE ( 'NONE', #4378, #3750, #2434, .T. ) ; +#2448 = CARTESIAN_POINT ( 'NONE', ( -3.691260576693725900, 7.369860914666136700, 9.070504074407827100 ) ) ; +#2449 = DIRECTION ( 'NONE', ( 9.912705577010325500E-017, 7.102372210066411100E-050, 1.000000000000000000 ) ) ; +#2450 = AXIS2_PLACEMENT_3D ( 'NONE', #537, #4219, #2125 ) ; +#2451 = CARTESIAN_POINT ( 'NONE', ( 14.75090524395571200, -10.70544945044390600, -15.25845469439522600 ) ) ; +#2452 = CARTESIAN_POINT ( 'NONE', ( 12.31000278554974500, -12.63176217742977400, -3.277205641478954800 ) ) ; +#2453 = CYLINDRICAL_SURFACE ( 'NONE', #2037, 100.0000000000000000 ) ; +#2454 = CARTESIAN_POINT ( 'NONE', ( -0.4786304219377727800, -11.62193237654915900, -4.030816899450051900 ) ) ; +#2455 = CARTESIAN_POINT ( 'NONE', ( 13.67812776397271400, -12.52746712240772500, -9.640037136296847100 ) ) ; +#2456 = AXIS2_PLACEMENT_3D ( 'NONE', #2830, #573, #3185 ) ; +#2457 = CIRCLE ( 'NONE', #3205, 50.00000000000000000 ) ; +#2458 = VERTEX_POINT ( 'NONE', #439 ) ; +#2459 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 1.082611693429101600E-015, 13.50001676643945100 ) ) ; +#2460 = CIRCLE ( 'NONE', #3128, 1.000000000000000900 ) ; +#2461 = ORIENTED_EDGE ( 'NONE', *, *, #719, .F. ) ; +#2462 = CARTESIAN_POINT ( 'NONE', ( 2.112496518062820800, -13.44627106073971100, -3.332597199330517700 ) ) ; +#2463 = CARTESIAN_POINT ( 'NONE', ( 12.60160000000000700, 24.60510328464177100, 68.99053987866142300 ) ) ; +#2464 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 7.499997531949971700, -9.999983233560549000 ) ) ; +#2465 = LINE ( 'NONE', #4205, #2289 ) ; +#2466 = ORIENTED_EDGE ( 'NONE', *, *, #2351, .F. ) ; +#2467 = VERTEX_POINT ( 'NONE', #3441 ) ; +#2468 = CARTESIAN_POINT ( 'NONE', ( 2.163239057511581200, -13.35034948886333000, -5.656644951431892400 ) ) ; +#2469 = CARTESIAN_POINT ( 'NONE', ( 1.932334118604641400, -10.73463500113416700, -9.914337676050239500 ) ) ; +#2470 = LINE ( 'NONE', #943, #2415 ) ; +#2471 = EDGE_CURVE ( 'NONE', #1134, #4659, #1604, .T. ) ; +#2472 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2473 = ORIENTED_EDGE ( 'NONE', *, *, #1846, .T. ) ; +#2474 = VERTEX_POINT ( 'NONE', #1276 ) ; +#2475 = LINE ( 'NONE', #3841, #2506 ) ; +#2476 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.44630387609749900, 65.00001676643944400 ) ) ; +#2477 = ORIENTED_EDGE ( 'NONE', *, *, #4307, .F. ) ; +#2478 = CARTESIAN_POINT ( 'NONE', ( 5.223150528420450900, 20.43466303776799400, 69.50001676643945800 ) ) ; +#2479 = CARTESIAN_POINT ( 'NONE', ( 12.02808089090755500, 22.64103363471791400, 70.07450383493851100 ) ) ; +#2480 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -8.561776163818310100, -13.38134266248358100 ) ) ; +#2481 = ORIENTED_EDGE ( 'NONE', *, *, #1552, .F. ) ; +#2482 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999999600, 7.499997531949969900, 7.500016766439452800 ) ) ; +#2483 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 17.50001676643945100 ) ) ; +#2484 = AXIS2_PLACEMENT_3D ( 'NONE', #1369, #3876, #1773 ) ; +#2485 = CARTESIAN_POINT ( 'NONE', ( 2.188763204844540200, -11.01102708350174500, -8.841402680622218600 ) ) ; +#2486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2487 = ORIENTED_EDGE ( 'NONE', *, *, #762, .T. ) ; +#2488 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2489 = CIRCLE ( 'NONE', #1281, 0.9999999999999991100 ) ; +#2490 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914452962100, 3.244746686838852100, -13.76770913345428000 ) ) ; +#2491 = CARTESIAN_POINT ( 'NONE', ( 13.56090487706768000, -11.60791127533615400, 8.060831337587822900 ) ) ; +#2492 = CARTESIAN_POINT ( 'NONE', ( 4.325610695885157700, 21.00526717239642600, 69.96593655342985600 ) ) ; +#2493 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #425, #2706, #843, #3428, #1257, #3766, #1672 ), + .UNSPECIFIED., .F., .F., + ( 4, 3, 4 ), + ( 1.734723475976807100E-018, 0.0001705547661374901500, 0.0001846969017612733800 ), + .UNSPECIFIED. ) ; +#2494 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999800, 7.499997531949971700, 6.500016766439454600 ) ) ; +#2495 = CARTESIAN_POINT ( 'NONE', ( 11.72497383138500700, 21.02409608978786100, 69.74309545279965100 ) ) ; +#2496 = ADVANCED_FACE ( 'NONE', ( #4308 ), #2317, .T. ) ; +#2497 = CARTESIAN_POINT ( 'NONE', ( 13.05065625627225000, -13.09506636799208200, -12.29833867051685700 ) ) ; +#2498 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949969000, 15.00001676643945100 ) ) ; +#2499 = CARTESIAN_POINT ( 'NONE', ( 3.810669584284768000, 21.45526191732851400, 69.28036667609546800 ) ) ; +#2500 = LINE ( 'NONE', #2335, #2396 ) ; +#2501 = CARTESIAN_POINT ( 'NONE', ( -4.348488234431418000, 7.499997531949536400, -8.486152373996297600 ) ) ; +#2502 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000200, -9.186988295993382200, 20.00001676643945100 ) ) ; +#2503 = FACE_OUTER_BOUND ( 'NONE', #3625, .T. ) ; +#2504 = AXIS2_PLACEMENT_3D ( 'NONE', #3139, #936, #3503 ) ; +#2505 = CARTESIAN_POINT ( 'NONE', ( 15.08846276727792500, -11.23071723394916400, 9.495936553890301100 ) ) ; +#2506 = VECTOR ( 'NONE', #71, 1000.000000000000000 ) ; +#2507 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, 2.499997531949971700, -13.91766076750309200 ) ) ; +#2508 = CARTESIAN_POINT ( 'NONE', ( 4.372948762358208600E-015, -11.85209541680517200, 10.69866484841042500 ) ) ; +#2509 = AXIS2_PLACEMENT_3D ( 'NONE', #2870, #4291, #2183 ) ; +#2510 = CARTESIAN_POINT ( 'NONE', ( 13.81129402407265200, -9.588200806079287400, -12.44307832019289100 ) ) ; +#2511 = EDGE_LOOP ( 'NONE', ( #2921, #2962, #2964, #2976, #2999 ) ) ; +#2512 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2513 = CARTESIAN_POINT ( 'NONE', ( 2.604131147766180400, 23.51738681573851900, 70.12250586579899900 ) ) ; +#2514 = CIRCLE ( 'NONE', #2194, 50.00000000000000000 ) ; +#2515 = CARTESIAN_POINT ( 'NONE', ( -0.8167493710932604000, 6.096549534446879200, -11.32068279918335900 ) ) ; +#2516 = CARTESIAN_POINT ( 'NONE', ( 1.694567150645468900, -11.63176217742977600, 5.701572494504144800 ) ) ; +#2517 = VERTEX_POINT ( 'NONE', #3086 ) ; +#2518 = DIRECTION ( 'NONE', ( -0.09676322330213527100, 0.0000000000000000000, -0.9953074291977234100 ) ) ; +#2519 = VECTOR ( 'NONE', #4150, 1000.000000000000000 ) ; +#2520 = ADVANCED_FACE ( 'NONE', ( #4627 ), #3592, .F. ) ; +#2521 = ORIENTED_EDGE ( 'NONE', *, *, #2161, .F. ) ; +#2522 = ORIENTED_EDGE ( 'NONE', *, *, #1346, .T. ) ; +#2523 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2524 = LINE ( 'NONE', #1676, #2519 ) ; +#2525 = ORIENTED_EDGE ( 'NONE', *, *, #210, .T. ) ; +#2526 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -11.44630387609749900, 65.00001676643944400 ) ) ; +#2527 = EDGE_LOOP ( 'NONE', ( #3697, #3720, #3725, #3739 ) ) ; +#2528 = CARTESIAN_POINT ( 'NONE', ( 15.06015107817175500, -10.54278062380650600, -10.64653184582062600 ) ) ; +#2529 = CYLINDRICAL_SURFACE ( 'NONE', #1961, 2.500000000000000000 ) ; +#2530 = CARTESIAN_POINT ( 'NONE', ( 2.036272226111534700, 7.647465808380086800, -7.798371753260100900 ) ) ; +#2531 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#2532 = EDGE_LOOP ( 'NONE', ( #3235, #4449, #3887, #3296 ) ) ; +#2533 = EDGE_CURVE ( 'NONE', #2426, #3418, #2245, .T. ) ; +#2534 = CARTESIAN_POINT ( 'NONE', ( -0.3128052538507319900, -11.63176217742977400, -1.826330541145015900 ) ) ; +#2535 = EDGE_LOOP ( 'NONE', ( #2849, #745, #878, #3786 ) ) ; +#2536 = ORIENTED_EDGE ( 'NONE', *, *, #1206, .F. ) ; +#2537 = CARTESIAN_POINT ( 'NONE', ( 1.576882606284336600, 7.288503331807566700, -9.278437248757342100 ) ) ; +#2538 = VECTOR ( 'NONE', #3726, 1000.000000000000000 ) ; +#2539 = CARTESIAN_POINT ( 'NONE', ( -24.90130541525923000, 12.49999753194997300, 16.35530422760516000 ) ) ; +#2540 = AXIS2_PLACEMENT_3D ( 'NONE', #4547, #2439, #107 ) ; +#2541 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 9.099997531949975700, -4.999983233560542800 ) ) ; +#2542 = ORIENTED_EDGE ( 'NONE', *, *, #3019, .T. ) ; +#2543 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2544 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2545 = VECTOR ( 'NONE', #3544, 1000.000000000000000 ) ; +#2546 = AXIS2_PLACEMENT_3D ( 'NONE', #1303, #2744, #4500 ) ; +#2547 = CARTESIAN_POINT ( 'NONE', ( 12.99532530796210100, -13.43056342688517700, -2.439443545168394200 ) ) ; +#2548 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2549 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.597114959037287300, -10.99998323356054500 ) ) ; +#2550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.019335917570373600E-017, -1.000000000000000000 ) ) ; +#2552 = CARTESIAN_POINT ( 'NONE', ( 4.366371602547936000, -14.10145342232852900, -11.37364955911342300 ) ) ; +#2553 = CARTESIAN_POINT ( 'NONE', ( 12.47403639573654400, -11.32569441966005600, -7.216765647997347900 ) ) ; +#2554 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -10.55229541076278600, 10.60314730934792000 ) ) ; +#2555 = EDGE_CURVE ( 'NONE', #2632, #3100, #635, .T. ) ; +#2556 = FACE_OUTER_BOUND ( 'NONE', #678, .T. ) ; +#2557 = FACE_OUTER_BOUND ( 'NONE', #2862, .T. ) ; +#2558 = CARTESIAN_POINT ( 'NONE', ( 13.30543414611547700, -11.63176217742977600, 5.701585833134593000 ) ) ; +#2559 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 1.002418334253397700E-015, 12.50001676643945100 ) ) ; +#2560 = CARTESIAN_POINT ( 'NONE', ( -0.1143083504835061700, -11.57217909228857000, 8.351247579389177400 ) ) ; +#2561 = PLANE ( 'NONE', #3251 ) ; +#2562 = FACE_OUTER_BOUND ( 'NONE', #3516, .T. ) ; +#2563 = AXIS2_PLACEMENT_3D ( 'NONE', #3105, #908, #3479 ) ; +#2564 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2565 = FACE_OUTER_BOUND ( 'NONE', #1086, .T. ) ; +#2566 = CARTESIAN_POINT ( 'NONE', ( 15.48827991714452800, -11.56535372068361100, -5.116128969666450000 ) ) ; +#2567 = ORIENTED_EDGE ( 'NONE', *, *, #134, .T. ) ; +#2568 = AXIS2_PLACEMENT_3D ( 'NONE', #507, #3122, #920 ) ; +#2569 = CARTESIAN_POINT ( 'NONE', ( 10.40545429365209500, 20.79220156678267300, 69.99964593372979500 ) ) ; +#2570 = EDGE_LOOP ( 'NONE', ( #4020, #4024, #4033, #4065, #4080 ) ) ; +#2571 = CARTESIAN_POINT ( 'NONE', ( 0.9924482408871261300, 2.627288019610017200, -12.87978940825534300 ) ) ; +#2572 = VECTOR ( 'NONE', #2692, 1000.000000000000000 ) ; +#2573 = ORIENTED_EDGE ( 'NONE', *, *, #479, .F. ) ; +#2574 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 69.35280431832386200 ) ) ; +#2575 = ORIENTED_EDGE ( 'NONE', *, *, #1337, .F. ) ; +#2576 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#2577 = VERTEX_POINT ( 'NONE', #3472 ) ; +#2578 = ORIENTED_EDGE ( 'NONE', *, *, #158, .T. ) ; +#2579 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2673, #3025, #808, #3394 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 4.336808689942017700E-019, 0.0006284640147730983500 ), + .UNSPECIFIED. ) ; +#2580 = CARTESIAN_POINT ( 'NONE', ( 12.85200990632477400, -13.45144181486987200, -3.626612029255210000 ) ) ; +#2581 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.146386871659068900E-032, -9.912705577010325500E-017 ) ) ; +#2582 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -13.17394646130280100, 60.10161676643944900 ) ) ; +#2583 = CYLINDRICAL_SURFACE ( 'NONE', #631, 35.00000000000000000 ) ; +#2584 = EDGE_CURVE ( 'NONE', #4239, #2914, #767, .T. ) ; +#2585 = ORIENTED_EDGE ( 'NONE', *, *, #142, .T. ) ; +#2586 = CARTESIAN_POINT ( 'NONE', ( 2.689997214450285100, -11.63176217742977200, -3.277205641478951200 ) ) ; +#2587 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 9.099997531949975700, -6.199983233560554500 ) ) ; +#2588 = CARTESIAN_POINT ( 'NONE', ( 15.10113282200471300, 3.561985087800141300, 12.39888394443405600 ) ) ; +#2589 = VERTEX_POINT ( 'NONE', #1315 ) ; +#2590 = EDGE_CURVE ( 'NONE', #2632, #4288, #4526, .T. ) ; +#2591 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2592 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 24.99999753194998300, 65.73015992574794100 ) ) ; +#2593 = CARTESIAN_POINT ( 'NONE', ( 13.49999999999999600, 7.404783783242379500, -8.805759462705076100 ) ) ; +#2594 = VERTEX_POINT ( 'NONE', #2767 ) ; +#2595 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#2596 = CIRCLE ( 'NONE', #1428, 3.189999999999994200 ) ; +#2597 = AXIS2_PLACEMENT_3D ( 'NONE', #1855, #4316, #2206 ) ; +#2598 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -4.999983233560542800 ) ) ; +#2599 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -11.61326002581680200, 10.94186074424666600 ) ) ; +#2600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2601 = AXIS2_PLACEMENT_3D ( 'NONE', #3813, #1712, #4166 ) ; +#2602 = CARTESIAN_POINT ( 'NONE', ( 16.02446187144909500, 5.549946490428457200, 12.27066252070078400 ) ) ; +#2603 = CARTESIAN_POINT ( 'NONE', ( -6.904847716900785400E-014, 24.70767846768091000, 68.12761677690456000 ) ) ; +#2604 = CARTESIAN_POINT ( 'NONE', ( 15.05577622914452700, 3.244746686838853500, -13.76770913345428400 ) ) ; +#2605 = CARTESIAN_POINT ( 'NONE', ( 13.01920297782835500, 22.82434613477052200, 69.45144354212160900 ) ) ; +#2606 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1694, #3790, #1286, #2050 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 3.141592653589793100 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2607 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2608 = FACE_OUTER_BOUND ( 'NONE', #4438, .T. ) ; +#2609 = CIRCLE ( 'NONE', #1467, 5.000000000000000000 ) ; +#2610 = CARTESIAN_POINT ( 'NONE', ( 13.18018702724040400, 7.544754821908998800, -7.906673467481539300 ) ) ; +#2611 = CIRCLE ( 'NONE', #3024, 5.000000000000000900 ) ; +#2612 = FACE_OUTER_BOUND ( 'NONE', #3525, .T. ) ; +#2613 = EDGE_CURVE ( 'NONE', #4029, #2253, #122, .T. ) ; +#2614 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 12.49999753194997600, -3.799983233560538100 ) ) ; +#2615 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -9.117196723129287900, 16.83350028293638800 ) ) ; +#2616 = CARTESIAN_POINT ( 'NONE', ( 19.21446023281354300, 7.499997531949969900, 8.154633239095316500 ) ) ; +#2617 = CARTESIAN_POINT ( 'NONE', ( 2.331368432063218000, 22.71560533970128400, 69.66872447800723500 ) ) ; +#2618 = CARTESIAN_POINT ( 'NONE', ( 1.700000000000012200, 9.099997531949975700, -4.999983233560542800 ) ) ; +#2619 = ORIENTED_EDGE ( 'NONE', *, *, #1538, .F. ) ; +#2620 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 1.734723475976805600E-016 ) ) ; +#2621 = LINE ( 'NONE', #4444, #2572 ) ; +#2622 = AXIS2_PLACEMENT_3D ( 'NONE', #3770, #1692, #4149 ) ; +#2623 = CARTESIAN_POINT ( 'NONE', ( 12.66863156794099200, 22.71560533970230700, 69.66872447800473400 ) ) ; +#2624 = ORIENTED_EDGE ( 'NONE', *, *, #1488, .T. ) ; +#2625 = FACE_OUTER_BOUND ( 'NONE', #3674, .T. ) ; +#2626 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2627 = VERTEX_POINT ( 'NONE', #1959 ) ; +#2628 = CLOSED_SHELL ( 'NONE', ( #2207, #1820, #3591, #121, #2868, #4003, #4583, #2520, #314, #196, #4192, #3918, #1056, #716, #504, #2889, #3563, #4273, #528, #1129, #3211, #1078, #854, #651, #1423, #3942, #2180, #723, #1721, #3958, #390, #205, #2797, #1347, #4326, #2685, #998, #1512, #4258, #4039, #2931, #1359, #3883, #1023, #1531, #286, #233, #641, #2165, #334, #698, #752, #263, #827, #933, #1051, #2841, #1158, #1153, #1485, #1119, #1183, #4306, #1233, #1070, #1482, #4557, #1500, #3143, #1174, #605, #613, #623, #1208, #1031, #3844, #1437, #743, #1539, #1045, #46, #1461, #1101, #4281, #1469, #3609, #985, #1888, #4101, #1227, #591, #244, #1096, #1450, #4618, #4636, #664, #582, #17, #3084, #95, #1259, #167, #669, #254, #279, #1557, #3983, #183, #445, #4675, #3297, #777, #1505, #647, #417, #2496, #227, #692, #4157, #321, #1015, #258, #1564, #339 ) ) ; +#2629 = AXIS2_PLACEMENT_3D ( 'NONE', #466, #3093, #890 ) ; +#2630 = FACE_OUTER_BOUND ( 'NONE', #2252, .T. ) ; +#2631 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999753194998300, 65.73015992574794100 ) ) ; +#2632 = VERTEX_POINT ( 'NONE', #4416 ) ; +#2633 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #392, #2191, #648 ), + ( #3252, #1059, #3605 ), + ( #1479, #3963, #1858 ), + ( #4318, #2212, #4650 ), + ( #2553, #248, #2904 ), + ( #662, #3269, #1081 ), + ( #3620, #1494, #3980 ), + ( #1874, #4329, #2227 ), + ( #4664, #2566, #259 ), + ( #2920, #680, #3282 ), + ( #1095, #3639, #1507 ), + ( #3992, #1890, #4344 ), + ( #2233, #4677, #2580 ), + ( #277, #2933, #700 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001754031153298247200, 0.003508062306596494400, 0.004385077883245618400, 0.005262093459894741900, 0.006139109036543865400, 0.007016124613192988900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4366246731659458300, 1.000000000000000000), + ( 1.000000000000000000, 0.4128689029493897200, 1.000000000000000000), + ( 1.000000000000000000, 0.3902442741126878100, 1.000000000000000000), + ( 1.000000000000000000, 0.3498856594836162700, 1.000000000000000000), + ( 1.000000000000000000, 0.3321356498970295900, 1.000000000000000000), + ( 1.000000000000000000, 0.3120528095770229700, 1.000000000000000000), + ( 1.000000000000000000, 0.3064610658230101900, 1.000000000000000000), + ( 1.000000000000000000, 0.2979967323825835600, 1.000000000000000000), + ( 1.000000000000000000, 0.2951293528727311800, 1.000000000000000000), + ( 1.000000000000000000, 0.2924997952262557400, 1.000000000000000000), + ( 1.000000000000000000, 0.2927520483320227300, 1.000000000000000000), + ( 1.000000000000000000, 0.2963981097009825700, 1.000000000000000000), + ( 1.000000000000000000, 0.2997755824384977800, 1.000000000000000000), + ( 1.000000000000000000, 0.3045415543813815900, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#2634 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -1.809983233560547900 ) ) ; +#2635 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.61994334266236700, 65.71649289431353200 ) ) ; +#2636 = ORIENTED_EDGE ( 'NONE', *, *, #927, .T. ) ; +#2637 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 22.04668205197669200, 65.14646024778785700 ) ) ; +#2638 = CARTESIAN_POINT ( 'NONE', ( 14.00755175911287300, 2.800936197276946900, -13.86459716126755200 ) ) ; +#2639 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2640 = FACE_OUTER_BOUND ( 'NONE', #3199, .T. ) ; +#2641 = ORIENTED_EDGE ( 'NONE', *, *, #1254, .T. ) ; +#2642 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 21.63440936017109800, 68.53574555367065100 ) ) ; +#2643 = ORIENTED_EDGE ( 'NONE', *, *, #1519, .T. ) ; +#2644 = VERTEX_POINT ( 'NONE', #3702 ) ; +#2645 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.583626710175760200, -13.89996547090808600 ) ) ; +#2646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9848077530122081300, 0.1736481776669295800 ) ) ; +#2647 = EDGE_CURVE ( 'NONE', #2301, #2901, #4088, .T. ) ; +#2648 = VECTOR ( 'NONE', #1597, 1000.000000000000000 ) ; +#2649 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#2650 = ORIENTED_EDGE ( 'NONE', *, *, #2555, .T. ) ; +#2651 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1942237708554719900, 0.9809572502584816800 ) ) ; +#2652 = AXIS2_PLACEMENT_3D ( 'NONE', #3138, #1742, #3501 ) ; +#2653 = CARTESIAN_POINT ( 'NONE', ( 39.81572996294411100, 12.49999753194997300, 16.21180721497851400 ) ) ; +#2654 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#2655 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 19.98722159839779200, 70.00001676643945800 ) ) ; +#2656 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2657 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 20.55293979002667400, 65.00001676643944400 ) ) ; +#2658 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, -23.22509174754585400, -9.999983233560550700 ) ) ; +#2659 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 68.99053987906626200 ) ) ; +#2660 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2661 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.455444314826512400, -13.92551670175932300 ) ) ; +#2662 = FACE_OUTER_BOUND ( 'NONE', #1274, .T. ) ; +#2663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2664 = DIRECTION ( 'NONE', ( 0.6080605814734575400, -0.7938906280201075700, 0.0000000000000000000 ) ) ; +#2665 = EDGE_CURVE ( 'NONE', #419, #3628, #427, .T. ) ; +#2666 = CIRCLE ( 'NONE', #2278, 6.000000000000000000 ) ; +#2667 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2668 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 65.00001676643944400 ) ) ; +#2669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.243794116878613800E-016 ) ) ; +#2670 = CYLINDRICAL_SURFACE ( 'NONE', #2053, 3.750000000000000000 ) ; +#2671 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2672 = VERTEX_POINT ( 'NONE', #4063 ) ; +#2673 = CARTESIAN_POINT ( 'NONE', ( 0.9330685250265695600, 3.244746686838853000, -12.77886437928318800 ) ) ; +#2674 = CARTESIAN_POINT ( 'NONE', ( 12.88750348193717500, -13.44627106073971300, -3.332597199330517700 ) ) ; +#2675 = CIRCLE ( 'NONE', #1565, 36.00000000000000000 ) ; +#2676 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -4.669957029759412000, -15.18191720718619000 ) ) ; +#2677 = ORIENTED_EDGE ( 'NONE', *, *, #758, .T. ) ; +#2678 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.5699860136114656100, 0.8216543946741296000 ) ) ; +#2679 = VERTEX_POINT ( 'NONE', #368 ) ; +#2680 = CARTESIAN_POINT ( 'NONE', ( 17.07106781186547200, 7.499997531949969000, 11.01473539220088000 ) ) ; +#2681 = CIRCLE ( 'NONE', #3217, 3.189999999999994200 ) ; +#2682 = CARTESIAN_POINT ( 'NONE', ( 14.08715237125114200, -12.01189854471799200, -11.07183020340313300 ) ) ; +#2683 = ORIENTED_EDGE ( 'NONE', *, *, #517, .F. ) ; +#2684 = ORIENTED_EDGE ( 'NONE', *, *, #389, .F. ) ; +#2685 = ADVANCED_FACE ( 'NONE', ( #1731 ), #304, .F. ) ; +#2686 = CYLINDRICAL_SURFACE ( 'NONE', #1006, 1.000000000000000900 ) ; +#2687 = ORIENTED_EDGE ( 'NONE', *, *, #1301, .T. ) ; +#2688 = ORIENTED_EDGE ( 'NONE', *, *, #2323, .F. ) ; +#2689 = FACE_OUTER_BOUND ( 'NONE', #3578, .T. ) ; +#2690 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 12.49999753194997600, -6.199983233560548300 ) ) ; +#2691 = ORIENTED_EDGE ( 'NONE', *, *, #762, .F. ) ; +#2692 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2693 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2682, #4769, #3032, #817 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009835880167519595000 ), + .UNSPECIFIED. ) ; +#2694 = CARTESIAN_POINT ( 'NONE', ( 1.519723418810294800, -12.63176217742977600, 7.500016766439454600 ) ) ; +#2695 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2696 = CARTESIAN_POINT ( 'NONE', ( 0.9330685250265695600, 3.244746686838853000, -12.77886437928318800 ) ) ; +#2697 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2698 = ORIENTED_EDGE ( 'NONE', *, *, #384, .F. ) ; +#2699 = CARTESIAN_POINT ( 'NONE', ( 3.363135156344658300, 6.747595391603430100, -10.47242612333740700 ) ) ; +#2700 = CARTESIAN_POINT ( 'NONE', ( 12.54118912029024500, 7.367408058496639700, -9.008110004157075000 ) ) ; +#2701 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949968100, 15.00001676643945100 ) ) ; +#2702 = ORIENTED_EDGE ( 'NONE', *, *, #2161, .T. ) ; +#2703 = EDGE_CURVE ( 'NONE', #4245, #3735, #4415, .T. ) ; +#2704 = CIRCLE ( 'NONE', #1524, 3.189999999999994200 ) ; +#2705 = CARTESIAN_POINT ( 'NONE', ( -25.19174207655504500, 12.49999753194996900, 15.00001676643945100 ) ) ; +#2706 = CARTESIAN_POINT ( 'NONE', ( 13.44781145801944100, 7.499997531949971700, -7.951348723854566800 ) ) ; +#2707 = AXIS2_PLACEMENT_3D ( 'NONE', #1872, #2564, #275 ) ; +#2708 = CARTESIAN_POINT ( 'NONE', ( 15.76692535189702600, 5.177450703499097500, -12.91433018615122600 ) ) ; +#2709 = CARTESIAN_POINT ( 'NONE', ( 14.89020241619079600, -12.27008033386388200, 10.12388342827639000 ) ) ; +#2710 = AXIS2_PLACEMENT_3D ( 'NONE', #3443, #1284, #3789 ) ; +#2711 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 2.326349354283046900, -12.93285301449088500 ) ) ; +#2712 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.052991972156810600, 16.68484191492372700 ) ) ; +#2713 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2714 = PLANE ( 'NONE', #969 ) ; +#2715 = CARTESIAN_POINT ( 'NONE', ( 2.877709411891981300, 7.835614086904264800, -9.793166078343219300 ) ) ; +#2716 = CARTESIAN_POINT ( 'NONE', ( 13.01396940321054400, 7.054256011867732200, -9.900018464480725200 ) ) ; +#2717 = CARTESIAN_POINT ( 'NONE', ( 13.26972189700091500, -10.48186707534378600, -10.77203695102143200 ) ) ; +#2718 = FACE_OUTER_BOUND ( 'NONE', #4103, .T. ) ; +#2719 = FACE_OUTER_BOUND ( 'NONE', #551, .T. ) ; +#2720 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2721 = CARTESIAN_POINT ( 'NONE', ( 2.528451569874222500, 8.258998127132372200, -9.267821437796490300 ) ) ; +#2722 = CIRCLE ( 'NONE', #696, 1.000000000000000000 ) ; +#2723 = CARTESIAN_POINT ( 'NONE', ( 16.93500063118012700, 6.506232146823499800, -10.89963997724908200 ) ) ; +#2724 = CIRCLE ( 'NONE', #4404, 2.500000000000000400 ) ; +#2725 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999753194998300, 60.10161676643944900 ) ) ; +#2726 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -6.631762177429775000, 7.500016766439451900 ) ) ; +#2727 = CARTESIAN_POINT ( 'NONE', ( 1.730278102999085200, -11.43587127126034800, -11.07183020340313300 ) ) ; +#2728 = CARTESIAN_POINT ( 'NONE', ( 12.85148454472997600, -13.45151834961470300, -3.630963928112319400 ) ) ; +#2729 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2730 = VECTOR ( 'NONE', #3603, 1000.000000000000000 ) ; +#2731 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2732 = CARTESIAN_POINT ( 'NONE', ( 2.482662940701600100, 7.323461758904355400, -9.201515996291806900 ) ) ; +#2733 = EDGE_LOOP ( 'NONE', ( #1994, #4251, #1063 ) ) ; +#2734 = CARTESIAN_POINT ( 'NONE', ( 11.77194550140193700, 7.633816654971466800, -9.971180530046341400 ) ) ; +#2735 = FACE_OUTER_BOUND ( 'NONE', #1867, .T. ) ; +#2736 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669294400, 0.9848077530122082400 ) ) ; +#2737 = ORIENTED_EDGE ( 'NONE', *, *, #175, .T. ) ; +#2738 = CARTESIAN_POINT ( 'NONE', ( 13.84371308854614000, -11.26312900722401400, 9.404818404607722100 ) ) ; +#2739 = LINE ( 'NONE', #1074, #2730 ) ; +#2740 = AXIS2_PLACEMENT_3D ( 'NONE', #4483, #2374, #36 ) ; +#2741 = EDGE_LOOP ( 'NONE', ( #2197, #4069, #4754, #3848, #3003, #932, #3237 ) ) ; +#2742 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949972500, -7.834640608427712900 ) ) ; +#2743 = VERTEX_POINT ( 'NONE', #781 ) ; +#2744 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#2745 = CARTESIAN_POINT ( 'NONE', ( 13.83458235174382100, -12.34049684824548800, -10.17982295743313700 ) ) ; +#2746 = TOROIDAL_SURFACE ( 'NONE', #453, 6.000000000000000000, 1.000000000000000000 ) ; +#2747 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999994700, -14.13176217742977400, -10.17982295743313700 ) ) ; +#2748 = EDGE_LOOP ( 'NONE', ( #2417, #1465, #630, #3369 ) ) ; +#2749 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2750 = VERTEX_POINT ( 'NONE', #1990 ) ; +#2751 = CARTESIAN_POINT ( 'NONE', ( 2.188536886088303700, -11.01080084773951600, -8.842361010109174300 ) ) ; +#2752 = CIRCLE ( 'NONE', #2364, 3.189999999999994200 ) ; +#2753 = ORIENTED_EDGE ( 'NONE', *, *, #772, .T. ) ; +#2754 = CARTESIAN_POINT ( 'NONE', ( -0.08434860775260358300, -10.59679438197408700, -10.40631446767779500 ) ) ; +#2755 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.499997531949968500, 13.50001676643945100 ) ) ; +#2756 = EDGE_LOOP ( 'NONE', ( #2677, #2092, #4126, #3304, #421, #2473 ) ) ; +#2757 = CARTESIAN_POINT ( 'NONE', ( 12.13490658736824000, 7.850894297528719300, -9.775143037363628600 ) ) ; +#2758 = VECTOR ( 'NONE', #2414, 1000.000000000000000 ) ; +#2759 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2760 = CARTESIAN_POINT ( 'NONE', ( 2.689997214450254000, -11.63176217742977400, -3.277205641478954800 ) ) ; +#2761 = ORIENTED_EDGE ( 'NONE', *, *, #2792, .F. ) ; +#2762 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -4.843605207426332300, -14.19710945417397800 ) ) ; +#2763 = LINE ( 'NONE', #3749, #3374 ) ; +#2764 = DIRECTION ( 'NONE', ( 8.541845642371225700E-016, 0.9848077530122081300, 0.1736481776669298600 ) ) ; +#2765 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 43.36823782257022200, 60.10161676643944900 ) ) ; +#2766 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#2767 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000008900, 7.499997531949971700, -1.809983233560547900 ) ) ; +#2768 = EDGE_CURVE ( 'NONE', #2972, #1133, #366, .T. ) ; +#2769 = CARTESIAN_POINT ( 'NONE', ( -0.1599167562858102600, 3.796410373064097700, 13.30811665889658200 ) ) ; +#2770 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.961054449550955700E-016, 0.0000000000000000000 ) ) ; +#2771 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -12.96664603309567800, -12.54328693733198300 ) ) ; +#2772 = CARTESIAN_POINT ( 'NONE', ( -0.006293132594061464800, 2.750779753055784000, -13.86459716126755200 ) ) ; +#2773 = CARTESIAN_POINT ( 'NONE', ( 0.9330685250265672300, 3.244746686838853000, -12.77886437928318700 ) ) ; +#2774 = CARTESIAN_POINT ( 'NONE', ( 13.97057992376240800, -9.013095402883232400, -13.03854257350805100 ) ) ; +#2775 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 12.49999753194997600, -14.99998323356054400 ) ) ; +#2776 = CARTESIAN_POINT ( 'NONE', ( 0.5219713787026416500, -11.36586346646396200, -12.27154969997874900 ) ) ; +#2777 = VECTOR ( 'NONE', #1302, 1000.000000000000000 ) ; +#2778 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1252, #1667, #29, #2717 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 1.734723475976806900E-018, 0.0009167149524453666100 ), + .UNSPECIFIED. ) ; +#2779 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 2.499997531949971200, -7.834640608427718300 ) ) ; +#2780 = CARTESIAN_POINT ( 'NONE', ( -0.8039352647339996800, 5.260550311863101800, 11.69608150170607000 ) ) ; +#2781 = FACE_OUTER_BOUND ( 'NONE', #4118, .T. ) ; +#2782 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -14.13176217742977400, -10.17982295743313700 ) ) ; +#2783 = CIRCLE ( 'NONE', #2597, 5.000000000000000000 ) ; +#2784 = CARTESIAN_POINT ( 'NONE', ( 3.993208718695501400, 20.55293979002667700, 69.89760508273241200 ) ) ; +#2785 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 161.9249932573022800 ) ) ; +#2786 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2787 = VERTEX_POINT ( 'NONE', #1231 ) ; +#2788 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999999600, 12.49999753194997300, 7.500016766439455500 ) ) ; +#2789 = CYLINDRICAL_SURFACE ( 'NONE', #4703, 1.200000000000004800 ) ; +#2790 = CARTESIAN_POINT ( 'NONE', ( 1.000000009570315200, -8.795393499680869800, -13.21928107692896000 ) ) ; +#2791 = ORIENTED_EDGE ( 'NONE', *, *, #474, .T. ) ; +#2792 = EDGE_CURVE ( 'NONE', #4079, #3531, #3696, .T. ) ; +#2793 = CARTESIAN_POINT ( 'NONE', ( 13.20414432273784100, -10.57134785954858300, -10.48729057028370600 ) ) ; +#2794 = ORIENTED_EDGE ( 'NONE', *, *, #1618, .F. ) ; +#2795 = DIRECTION ( 'NONE', ( -9.912705577010325500E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2796 = LINE ( 'NONE', #4372, #2893 ) ; +#2797 = ADVANCED_FACE ( 'NONE', ( #1270 ), #4439, .T. ) ; +#2798 = EDGE_LOOP ( 'NONE', ( #4175, #4186, #4200, #4227 ) ) ; +#2799 = CARTESIAN_POINT ( 'NONE', ( -3.429512692032088900, 7.369860914666041700, 8.808756189745958300 ) ) ; +#2800 = ORIENTED_EDGE ( 'NONE', *, *, #4747, .F. ) ; +#2801 = AXIS2_PLACEMENT_3D ( 'NONE', #496, #3110, #913 ) ; +#2802 = FACE_OUTER_BOUND ( 'NONE', #3575, .T. ) ; +#2803 = ORIENTED_EDGE ( 'NONE', *, *, #542, .F. ) ; +#2804 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2805 = ORIENTED_EDGE ( 'NONE', *, *, #3759, .F. ) ; +#2806 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2807 = CARTESIAN_POINT ( 'NONE', ( 14.51710188509117900, -11.28539317962706100, -14.75576044923759300 ) ) ; +#2808 = LINE ( 'NONE', #4355, #2835 ) ; +#2809 = DIRECTION ( 'NONE', ( -0.9954315580766515100, 0.0000000000000000000, 0.09547781514618924900 ) ) ; +#2810 = AXIS2_PLACEMENT_3D ( 'NONE', #395, #4427, #1232 ) ; +#2811 = CARTESIAN_POINT ( 'NONE', ( 2.760130926629760700, -11.60779717421009800, -4.407380982151677200 ) ) ; +#2812 = ORIENTED_EDGE ( 'NONE', *, *, #1064, .T. ) ; +#2813 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2814 = VECTOR ( 'NONE', #91, 1000.000000000000000 ) ; +#2815 = CARTESIAN_POINT ( 'NONE', ( 12.31000278554974500, -11.63176217742977400, -3.277205641478954800 ) ) ; +#2816 = ORIENTED_EDGE ( 'NONE', *, *, #337, .F. ) ; +#2817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -8.019335917570373600E-017 ) ) ; +#2818 = VERTEX_POINT ( 'NONE', #836 ) ; +#2819 = CIRCLE ( 'NONE', #1556, 6.000000000000000000 ) ; +#2820 = CARTESIAN_POINT ( 'NONE', ( 13.44622222098240600, 24.54508376075153100, 69.35280431950461400 ) ) ; +#2821 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999994700, -11.44630387609749900, 70.00001676643945800 ) ) ; +#2822 = EDGE_CURVE ( 'NONE', #1774, #2914, #3189, .T. ) ; +#2823 = DIRECTION ( 'NONE', ( 0.2168679678768317400, 0.2591669825001944300, -0.9411698888567979800 ) ) ; +#2824 = CARTESIAN_POINT ( 'NONE', ( -0.4133782231235802500, -11.51064346884301900, -5.765383956561435300 ) ) ; +#2825 = CARTESIAN_POINT ( 'NONE', ( 1.165417648255850300, -12.34049684824545200, -10.17982295743309100 ) ) ; +#2826 = EDGE_CURVE ( 'NONE', #1344, #1812, #1405, .T. ) ; +#2827 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#2828 = LINE ( 'NONE', #2498, #3551 ) ; +#2829 = VECTOR ( 'NONE', #180, 1000.000000000000000 ) ; +#2830 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -9.131762177429775900, -10.17982295743313700 ) ) ; +#2831 = CARTESIAN_POINT ( 'NONE', ( 11.89006303698824700, 22.39396336030865000, 69.13675234665115000 ) ) ; +#2832 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -10.55229541076279200, 10.60314730934791400 ) ) ; +#2833 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, 7.499997531949969900, 6.500016766439454600 ) ) ; +#2834 = VECTOR ( 'NONE', #1636, 1000.000000000000000 ) ; +#2835 = VECTOR ( 'NONE', #2246, 1000.000000000000000 ) ; +#2836 = CARTESIAN_POINT ( 'NONE', ( 1.485954005269678900, -12.69864874381860700, -9.071600835604966700 ) ) ; +#2837 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2838 = AXIS2_PLACEMENT_3D ( 'NONE', #2069, #4525, #2410 ) ; +#2839 = CIRCLE ( 'NONE', #3744, 0.9999999999999998900 ) ; +#2840 = VERTEX_POINT ( 'NONE', #3757 ) ; +#2841 = ADVANCED_FACE ( 'NONE', ( #2366 ), #2714, .F. ) ; +#2842 = CARTESIAN_POINT ( 'NONE', ( 14.45113109346641900, -13.05244812654642000, 8.091686509828131000 ) ) ; +#2843 = CIRCLE ( 'NONE', #557, 5.000000000000000900 ) ; +#2844 = ORIENTED_EDGE ( 'NONE', *, *, #719, .T. ) ; +#2845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2846 = CARTESIAN_POINT ( 'NONE', ( 11.01151169795651600, 21.27306301909544600, 69.98509436804097600 ) ) ; +#2847 = PLANE ( 'NONE', #4198 ) ; +#2848 = LINE ( 'NONE', #1017, #2829 ) ; +#2849 = ORIENTED_EDGE ( 'NONE', *, *, #3088, .T. ) ; +#2850 = VERTEX_POINT ( 'NONE', #3777 ) ; +#2851 = CARTESIAN_POINT ( 'NONE', ( 12.74854548332023500, -13.31081959277509300, -11.99953987225178800 ) ) ; +#2852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#2853 = CARTESIAN_POINT ( 'NONE', ( 3.276759957706833600, 21.02310895340963600, 69.74347652437153000 ) ) ; +#2854 = FACE_OUTER_BOUND ( 'NONE', #4665, .T. ) ; +#2855 = EDGE_CURVE ( 'NONE', #3131, #4029, #4128, .T. ) ; +#2856 = CARTESIAN_POINT ( 'NONE', ( -3.815747922430158900, 7.393692747906682100, -9.255743101512219800 ) ) ; +#2857 = EDGE_LOOP ( 'NONE', ( #3899, #3904, #3922, #3926 ) ) ; +#2858 = ORIENTED_EDGE ( 'NONE', *, *, #776, .F. ) ; +#2859 = CC_DESIGN_APPROVAL ( #1929, ( #1421 ) ) ; +#2860 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1875, #225, #3270, #4330 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896600, 1.620973824359354300 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9997901959002109000, 0.9997901959002109000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2861 = CARTESIAN_POINT ( 'NONE', ( 13.97456637717615600, -10.88360990689806900, 10.14558942202137400 ) ) ; +#2862 = EDGE_LOOP ( 'NONE', ( #2160, #2168, #2204, #2217 ) ) ; +#2863 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669294400, 0.9848077530122082400 ) ) ; +#2864 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 15.00001676643945100 ) ) ; +#2865 = CARTESIAN_POINT ( 'NONE', ( 2.806277679523496700, 21.51797766272648700, 69.63823263315376300 ) ) ; +#2866 = CARTESIAN_POINT ( 'NONE', ( 14.76411753377821200, -10.67139914131829000, -13.07707984587767300 ) ) ; +#2867 = ORIENTED_EDGE ( 'NONE', *, *, #3597, .F. ) ; +#2868 = ADVANCED_FACE ( 'NONE', ( #162 ), #309, .F. ) ; +#2869 = LINE ( 'NONE', #4106, #4719 ) ; +#2870 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.715916581326906600, -15.40272833127762900 ) ) ; +#2871 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 12.49999753194997300, 15.00001676643945100 ) ) ; +#2872 = CARTESIAN_POINT ( 'NONE', ( 2.443657675834137100, 24.21586139035349600, 69.00004895299466100 ) ) ; +#2873 = ORIENTED_EDGE ( 'NONE', *, *, #786, .T. ) ; +#2874 = CARTESIAN_POINT ( 'NONE', ( -1.069951221823516800, 5.624294009975825400, -11.76468938660413100 ) ) ; +#2875 = CARTESIAN_POINT ( 'NONE', ( 0.8682081742704080800, -13.19484391934674000, 5.612102506242870000 ) ) ; +#2876 = CARTESIAN_POINT ( 'NONE', ( 11.00679128130450100, 20.55293979002667400, 69.89760508273241200 ) ) ; +#2877 = CIRCLE ( 'NONE', #1693, 1.000000000000000700 ) ; +#2878 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -1.809983233560547900 ) ) ; +#2879 = CARTESIAN_POINT ( 'NONE', ( 0.3229151401913469800, -12.74008152005646700, 9.152365370874685300 ) ) ; +#2880 = CARTESIAN_POINT ( 'NONE', ( 13.26972189700093100, -10.48186707534378600, -10.77203695102142700 ) ) ; +#2881 = EDGE_CURVE ( 'NONE', #951, #4748, #4247, .T. ) ; +#2882 = CARTESIAN_POINT ( 'NONE', ( 15.05577622914452700, 3.244746686838852100, -13.76770913345428000 ) ) ; +#2883 = CARTESIAN_POINT ( 'NONE', ( 2.303742628053262000, 7.889029242642736000, -7.633010232668779900 ) ) ; +#2884 = CARTESIAN_POINT ( 'NONE', ( 37.50000000000000000, 12.49999753194997300, 15.00001676643945100 ) ) ; +#2885 = CARTESIAN_POINT ( 'NONE', ( 2.603742194379401000, -11.63176217742977200, -2.377929005218365300 ) ) ; +#2886 = AXIS2_PLACEMENT_3D ( 'NONE', #1255, #3765, #1671 ) ; +#2887 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.131762177429777700, -1.423983831252754500E-015 ) ) ; +#2888 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999998900, 7.380453624190936400, -8.928642701025150800 ) ) ; +#2889 = ADVANCED_FACE ( 'NONE', ( #4138 ), #168, .T. ) ; +#2890 = TOROIDAL_SURFACE ( 'NONE', #1386, 105.0000000000000100, 5.000000000000000000 ) ; +#2891 = CARTESIAN_POINT ( 'NONE', ( -25.09834862737885100, 12.49999753194997300, 16.82376169851788800 ) ) ; +#2892 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2893 = VECTOR ( 'NONE', #2607, 1000.000000000000000 ) ; +#2894 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #310, #1540, #2955, #724, #3324, #1141, #3669, #1554, #4031, #1924, #4379, #2271, #4712, #2615, #326, #2970 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.0004945464183803220400, 0.0009890928367606440700, 0.001483639255140966200, 0.001978185673521288100, 0.002472732091901606600, 0.002967278510281925500, 0.003956371347042564200 ), + .UNSPECIFIED. ) ; +#2895 = CARTESIAN_POINT ( 'NONE', ( 15.31280394398230300, -11.63176217742977200, -1.826303986149907700 ) ) ; +#2896 = LINE ( 'NONE', #51, #2905 ) ; +#2897 = ORIENTED_EDGE ( 'NONE', *, *, #166, .T. ) ; +#2898 = CIRCLE ( 'NONE', #1390, 1.000000000000000700 ) ; +#2899 = CARTESIAN_POINT ( 'NONE', ( 1.932334118604929400, -10.73463500113415500, -9.914337676050280400 ) ) ; +#2900 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2901 = VERTEX_POINT ( 'NONE', #2054 ) ; +#2902 = CARTESIAN_POINT ( 'NONE', ( 3.442809985310610400, -13.89290299004179200, -11.48852663209423900 ) ) ; +#2903 = EDGE_LOOP ( 'NONE', ( #1652, #1663, #1668, #1717, #1723, #1757, #1765, #1779, #2567, #2585, #2578, #3421 ) ) ; +#2904 = CARTESIAN_POINT ( 'NONE', ( 13.09254549531689400, -13.09933817132003300, -7.395915427787580000 ) ) ; +#2905 = VECTOR ( 'NONE', #3089, 1000.000000000000000 ) ; +#2906 = ORIENTED_EDGE ( 'NONE', *, *, #1708, .T. ) ; +#2907 = EDGE_CURVE ( 'NONE', #3137, #3808, #1330, .T. ) ; +#2908 = ORIENTED_EDGE ( 'NONE', *, *, #4070, .T. ) ; +#2909 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, 12.49999753194997300, 6.500016766439455500 ) ) ; +#2910 = LINE ( 'NONE', #2887, #2938 ) ; +#2911 = ORIENTED_EDGE ( 'NONE', *, *, #1104, .T. ) ; +#2912 = CARTESIAN_POINT ( 'NONE', ( 14.13179344570163200, -13.19484334517851900, 5.612115872989543100 ) ) ; +#2913 = PLANE ( 'NONE', #181 ) ; +#2914 = VERTEX_POINT ( 'NONE', #2068 ) ; +#2915 = CARTESIAN_POINT ( 'NONE', ( 1.439086958252988400, -11.60791263107643400, 8.060890252617296500 ) ) ; +#2916 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#2917 = CIRCLE ( 'NONE', #4343, 4.999999999999999100 ) ; +#2918 = APPROVAL_PERSON_ORGANIZATION ( #3254, #1929, #2248 ) ; +#2919 = ORIENTED_EDGE ( 'NONE', *, *, #627, .F. ) ; +#2920 = CARTESIAN_POINT ( 'NONE', ( 12.23812305407314800, -11.59265873282300100, -4.703531642167011900 ) ) ; +#2921 = ORIENTED_EDGE ( 'NONE', *, *, #4540, .F. ) ; +#2922 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949970800, 8.673614525627818800E-016 ) ) ; +#2923 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -8.561776163818310100, -13.38134266248358300 ) ) ; +#2924 = EDGE_LOOP ( 'NONE', ( #2211, #2221, #2225, #2259 ) ) ; +#2925 = CARTESIAN_POINT ( 'NONE', ( 10.07046283124543800, 20.58109555517847200, 69.50001675864507400 ) ) ; +#2926 = AXIS2_PLACEMENT_3D ( 'NONE', #2339, #4456, #1639 ) ; +#2927 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999999600, 12.49999753194997300, 6.500016766439455500 ) ) ; +#2928 = TOROIDAL_SURFACE ( 'NONE', #1596, 45.00000000000000700, 5.000000000000000000 ) ; +#2929 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999753194998300, 65.73015992574794100 ) ) ; +#2930 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#2931 = ADVANCED_FACE ( 'NONE', ( #4027 ), #1278, .F. ) ; +#2932 = MECHANICAL_CONTEXT ( 'NONE', #2576, 'mechanical' ) ; +#2933 = CARTESIAN_POINT ( 'NONE', ( 15.42336318087469800, -11.63176217742977800, -3.575826722854621200 ) ) ; +#2934 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 0.0000000000000000000, 65.00001676643944400 ) ) ; +#2935 = CARTESIAN_POINT ( 'NONE', ( 2.112496518062852800, -13.44627106073971500, -3.332597199330515000 ) ) ; +#2936 = EDGE_CURVE ( 'NONE', #3735, #2306, #3869, .T. ) ; +#2937 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999997800, 8.385741033500860200, -8.999983233560549000 ) ) ; +#2938 = VECTOR ( 'NONE', #3602, 1000.000000000000000 ) ; +#2939 = CARTESIAN_POINT ( 'NONE', ( 14.30644337306833700, 4.111075824981854900, 12.24464728888271600 ) ) ; +#2940 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2941 = LINE ( 'NONE', #1225, #2834 ) ; +#2942 = FACE_OUTER_BOUND ( 'NONE', #4272, .T. ) ; +#2943 = CARTESIAN_POINT ( 'NONE', ( 13.37739240538544500, 7.252709212596676600, -9.391495120193511100 ) ) ; +#2944 = AXIS2_PLACEMENT_3D ( 'NONE', #4114, #2014, #4471 ) ; +#2945 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#2946 = CIRCLE ( 'NONE', #1818, 1.000000000000000900 ) ; +#2947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2948 = CARTESIAN_POINT ( 'NONE', ( -0.06296713769180198300, -10.93971126741595500, 10.05815388126162600 ) ) ; +#2949 = CARTESIAN_POINT ( 'NONE', ( 0.9330685250265646800, 3.393696517816628100, -13.76770913345428000 ) ) ; +#2950 = EDGE_LOOP ( 'NONE', ( #4023, #1140, #1933, #1828 ) ) ; +#2951 = AXIS2_PLACEMENT_3D ( 'NONE', #3030, #3724, #1985 ) ; +#2952 = CIRCLE ( 'NONE', #897, 36.00000000000000000 ) ; +#2953 = PLANE ( 'NONE', #3554 ) ; +#2954 = EDGE_LOOP ( 'NONE', ( #601, #612, #626, #640 ) ) ; +#2955 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -6.954502745148251300, 15.01574512026104800 ) ) ; +#2956 = CARTESIAN_POINT ( 'NONE', ( 15.99745963220245500, 5.536983494901117600, 11.50255713423742800 ) ) ; +#2957 = FACE_OUTER_BOUND ( 'NONE', #2748, .T. ) ; +#2958 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.62740962289406700, 65.71712971710630300 ) ) ; +#2959 = CARTESIAN_POINT ( 'NONE', ( 15.01290840117294300, 2.927974560993081600, -12.82779171207938200 ) ) ; +#2960 = VERTEX_POINT ( 'NONE', #4154 ) ; +#2961 = CARTESIAN_POINT ( 'NONE', ( 12.59323798864271300, 22.05383227974693500, 69.54819022785000000 ) ) ; +#2962 = ORIENTED_EDGE ( 'NONE', *, *, #786, .F. ) ; +#2963 = ORIENTED_EDGE ( 'NONE', *, *, #1653, .F. ) ; +#2964 = ORIENTED_EDGE ( 'NONE', *, *, #617, .F. ) ; +#2965 = CARTESIAN_POINT ( 'NONE', ( 13.42465141229448200, 7.499997531949971700, -8.003269003333327800 ) ) ; +#2966 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -4.999983233560542800 ) ) ; +#2967 = CIRCLE ( 'NONE', #99, 0.9999999999999991100 ) ; +#2968 = VERTEX_POINT ( 'NONE', #495 ) ; +#2969 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.93165966835666900, 65.00001676643944400 ) ) ; +#2970 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.186988295993375100, 17.50001676643945100 ) ) ; +#2971 = CARTESIAN_POINT ( 'NONE', ( 19.34538352734821100, 7.499997531949969900, 8.285556533629501200 ) ) ; +#2972 = VERTEX_POINT ( 'NONE', #514 ) ; +#2973 = AXIS2_PLACEMENT_3D ( 'NONE', #5, #2695, #410 ) ; +#2974 = CARTESIAN_POINT ( 'NONE', ( 3.447130357456841400E-014, 22.82089127764372100, 68.26935383964465100 ) ) ; +#2975 = PLANE ( 'NONE', #4048 ) ; +#2976 = ORIENTED_EDGE ( 'NONE', *, *, #793, .T. ) ; +#2977 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 23.70139134818958800, 65.55417217943622200 ) ) ; +#2978 = FACE_OUTER_BOUND ( 'NONE', #735, .T. ) ; +#2979 = AXIS2_PLACEMENT_3D ( 'NONE', #2320, #4757, #2664 ) ; +#2980 = PLANE ( 'NONE', #1333 ) ; +#2981 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.186988295993375100, 15.00001676643945100 ) ) ; +#2982 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#2983 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.06017549708846900, 65.63275858216061900 ) ) ; +#2984 = CARTESIAN_POINT ( 'NONE', ( 3.372664789941008000, 21.12607207025192900, 69.79242629908945600 ) ) ; +#2985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669294400, 0.9848077530122082400 ) ) ; +#2986 = CARTESIAN_POINT ( 'NONE', ( -0.3372893043474092200, 4.399954062412895400, -13.42989344321087400 ) ) ; +#2987 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#2988 = CARTESIAN_POINT ( 'NONE', ( 11.62733521006447300, 21.12607207025229200, 69.79242629908758000 ) ) ; +#2989 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000008900, 2.426704368369730200, -12.91515771785802400 ) ) ; +#2990 = CARTESIAN_POINT ( 'NONE', ( 10.60208186243800700, 20.94988510403725400, 69.40784625110310900 ) ) ; +#2991 = LINE ( 'NONE', #3381, #3389 ) ; +#2992 = EDGE_CURVE ( 'NONE', #2589, #1581, #2265, .T. ) ; +#2993 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.44630387609749900, 65.00001676643944400 ) ) ; +#2994 = CARTESIAN_POINT ( 'NONE', ( 39.49601352304345900, 12.49999753194997300, 15.81174400650003200 ) ) ; +#2995 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 2.499997531949969900, 12.50001676643945100 ) ) ; +#2996 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1632, #3733, #2331, #4772 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.662211482820231900, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9997901959002109000, 0.9997901959002109000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#2997 = VECTOR ( 'NONE', #4249, 1000.000000000000200 ) ; +#2998 = AXIS2_PLACEMENT_3D ( 'NONE', #380, #364, #2316 ) ; +#2999 = ORIENTED_EDGE ( 'NONE', *, *, #803, .T. ) ; +#3000 = CC_DESIGN_SECURITY_CLASSIFICATION ( #4279, ( #1421 ) ) ; +#3001 = LINE ( 'NONE', #1382, #2997 ) ; +#3002 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3003 = ORIENTED_EDGE ( 'NONE', *, *, #4098, .T. ) ; +#3004 = ORIENTED_EDGE ( 'NONE', *, *, #803, .F. ) ; +#3005 = AXIS2_PLACEMENT_3D ( 'NONE', #2329, #4767, #2678 ) ; +#3006 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3007 = ORIENTED_EDGE ( 'NONE', *, *, #1462, .F. ) ; +#3008 = ORIENTED_EDGE ( 'NONE', *, *, #823, .T. ) ; +#3009 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3010 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.9848077530122081300, 0.1736481776669295800 ) ) ; +#3011 = CARTESIAN_POINT ( 'NONE', ( 4.093887846825947600, 20.55293979002667400, 69.40784625110310900 ) ) ; +#3012 = ORIENTED_EDGE ( 'NONE', *, *, #1898, .F. ) ; +#3013 = ORIENTED_EDGE ( 'NONE', *, *, #4720, .T. ) ; +#3014 = EDGE_LOOP ( 'NONE', ( #3676, #3074, #4300, #3691, #3113, #4345 ) ) ; +#3015 = CARTESIAN_POINT ( 'NONE', ( 14.88658467884044300, -10.20082808308246500, -13.48598555511559700 ) ) ; +#3016 = VERTEX_POINT ( 'NONE', #1342 ) ; +#3017 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 15.00001676643945100 ) ) ; +#3018 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3019 = EDGE_CURVE ( 'NONE', #502, #1601, #3316, .T. ) ; +#3020 = FACE_OUTER_BOUND ( 'NONE', #3502, .T. ) ; +#3021 = CARTESIAN_POINT ( 'NONE', ( 14.33012701892219300, -11.63176217742977200, -14.39404467726971100 ) ) ; +#3022 = ORIENTED_EDGE ( 'NONE', *, *, #232, .F. ) ; +#3023 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3024 = AXIS2_PLACEMENT_3D ( 'NONE', #145, #2827, #569 ) ; +#3025 = CARTESIAN_POINT ( 'NONE', ( 0.9627576189823283700, 3.039434934234453800, -12.80979051882044200 ) ) ; +#3026 = AXIS2_PLACEMENT_3D ( 'NONE', #780, #1958, #1196 ) ; +#3027 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3028 = ORIENTED_EDGE ( 'NONE', *, *, #3111, .F. ) ; +#3029 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3030 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 67.50001676643944400 ) ) ; +#3031 = CIRCLE ( 'NONE', #2120, 35.00000000000000000 ) ; +#3032 = CARTESIAN_POINT ( 'NONE', ( 13.92075704186652600, -12.23751421496109500, -10.47900969051897000 ) ) ; +#3033 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 7.404783783242378600, -8.805759462705076100 ) ) ; +#3034 = AXIS2_PLACEMENT_3D ( 'NONE', #3011, #791, #3384 ) ; +#3035 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3036 = CARTESIAN_POINT ( 'NONE', ( 15.05577622914452700, 3.244746686838853000, -13.76770913345428400 ) ) ; +#3037 = CARTESIAN_POINT ( 'NONE', ( 0.3113800988818746200, -10.92227795130777700, -15.10004739111205700 ) ) ; +#3038 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3039 = DIRECTION ( 'NONE', ( -0.9953074291977230800, 0.0000000000000000000, -0.09676322330213864300 ) ) ; +#3040 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3041 = ORIENTED_EDGE ( 'NONE', *, *, #264, .T. ) ; +#3042 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3043 = CARTESIAN_POINT ( 'NONE', ( 3.317532538044228700, 7.046615352320829500, -9.988097320377006500 ) ) ; +#3044 = EDGE_CURVE ( 'NONE', #1774, #3119, #3198, .T. ) ; +#3045 = LINE ( 'NONE', #3812, #2777 ) ; +#3046 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2490, #3900, #986, #3545 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.291098825134364700, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8386274899012951000, 0.8386274899012951000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#3047 = CARTESIAN_POINT ( 'NONE', ( 12.39891953408451300, 8.139944788422232200, -9.442855215689189000 ) ) ; +#3048 = ORIENTED_EDGE ( 'NONE', *, *, #1064, .F. ) ; +#3049 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 8.019335917570373600E-017 ) ) ; +#3050 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3051 = EDGE_LOOP ( 'NONE', ( #4127, #4132, #4140, #4144 ) ) ; +#3052 = AXIS2_PLACEMENT_3D ( 'NONE', #813, #3399, #1230 ) ; +#3053 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#3054 = ORIENTED_EDGE ( 'NONE', *, *, #4009, .F. ) ; +#3055 = CARTESIAN_POINT ( 'NONE', ( 14.92031042227649000, 5.177450703498967000, -12.06771525653076400 ) ) ; +#3056 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -11.33640205742939100, 11.22377341792960700 ) ) ; +#3057 = VERTEX_POINT ( 'NONE', #526 ) ; +#3058 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.842152019522624000, 16.23613135187906700 ) ) ; +#3059 = ORIENTED_EDGE ( 'NONE', *, *, #3831, .T. ) ; +#3060 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3061 = AXIS2_PLACEMENT_3D ( 'NONE', #2639, #346, #2987 ) ; +#3062 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3063 = VERTEX_POINT ( 'NONE', #2788 ) ; +#3064 = CARTESIAN_POINT ( 'NONE', ( 2.255418823798141000, 6.946344657224236700, -10.12773086883792900 ) ) ; +#3065 = ORIENTED_EDGE ( 'NONE', *, *, #3805, .T. ) ; +#3066 = CARTESIAN_POINT ( 'NONE', ( 12.33458779666415800, 7.205903418612744600, -9.598946170704632400 ) ) ; +#3067 = ORIENTED_EDGE ( 'NONE', *, *, #776, .T. ) ; +#3068 = ORIENTED_EDGE ( 'NONE', *, *, #1350, .F. ) ; +#3069 = EDGE_LOOP ( 'NONE', ( #4390, #4400, #4405, #4443, #4457, #4496 ) ) ; +#3070 = AXIS2_PLACEMENT_3D ( 'NONE', #3712, #1614, #4078 ) ; +#3071 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999800, 7.499997531949969900, 7.500016766439451900 ) ) ; +#3072 = VERTEX_POINT ( 'NONE', #3146 ) ; +#3073 = VECTOR ( 'NONE', #3437, 1000.000000000000000 ) ; +#3074 = ORIENTED_EDGE ( 'NONE', *, *, #422, .T. ) ; +#3075 = CARTESIAN_POINT ( 'NONE', ( 17.70532433221647800, 6.981645602647386500, -10.58825140976921000 ) ) ; +#3076 = VERTEX_POINT ( 'NONE', #945 ) ; +#3077 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.734723475976807100E-015, -1.000000000000000000 ) ) ; +#3078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9540041959165606000, 0.2997932523816985200 ) ) ; +#3079 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999753195016100, 65.73015992574794100 ) ) ; +#3080 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 0.0000000000000000000, 20.00001676643945100 ) ) ; +#3081 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999995600, 9.999997531949969000, 15.00001676643945100 ) ) ; +#3082 = EDGE_LOOP ( 'NONE', ( #4165, #3572, #4745, #4184, #3615 ) ) ; +#3083 = CARTESIAN_POINT ( 'NONE', ( 2.527010258126262800, 8.261350957393469600, -9.264370980485084700 ) ) ; +#3084 = ADVANCED_FACE ( 'NONE', ( #1410 ), #4534, .T. ) ; +#3085 = CARTESIAN_POINT ( 'NONE', ( 12.04389100215781000, 6.778180131074078600, -10.42442162028960000 ) ) ; +#3086 = CARTESIAN_POINT ( 'NONE', ( 15.00629313259406100, 2.750779753055784000, -13.86459716126755200 ) ) ; +#3087 = ORIENTED_EDGE ( 'NONE', *, *, #356, .F. ) ; +#3088 = EDGE_CURVE ( 'NONE', #499, #3131, #3425, .T. ) ; +#3089 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3090 = CIRCLE ( 'NONE', #1851, 0.9999999999999998900 ) ; +#3091 = CARTESIAN_POINT ( 'NONE', ( 13.66940537148305900, -11.51482400909132800, 8.610205423168878300 ) ) ; +#3092 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 7.597114959037287300, -9.999983233560547200 ) ) ; +#3093 = DIRECTION ( 'NONE', ( 3.662194004839918700E-016, 0.5277777777777772400, 0.8493824917455924400 ) ) ; +#3094 = AXIS2_PLACEMENT_3D ( 'NONE', #2276, #4382, #4371 ) ; +#3095 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, 24.99999753194998300, 67.50001676643944400 ) ) ; +#3096 = CARTESIAN_POINT ( 'NONE', ( 2.528732928257403600, -11.32817883536908400, -7.201692837661399300 ) ) ; +#3097 = DIRECTION ( 'NONE', ( -1.368455531567204200E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#3098 = AXIS2_PLACEMENT_3D ( 'NONE', #4047, #1944, #4399 ) ; +#3099 = CYLINDRICAL_SURFACE ( 'NONE', #48, 3.189999999999994200 ) ; +#3100 = VERTEX_POINT ( 'NONE', #1399 ) ; +#3101 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, -13.17394646130280100, 60.10161676643944900 ) ) ; +#3102 = CARTESIAN_POINT ( 'NONE', ( 12.30790634378706200, 8.015937405490920000, -9.601861245444666800 ) ) ; +#3103 = CIRCLE ( 'NONE', #37, 3.189999999999994200 ) ; +#3104 = ORIENTED_EDGE ( 'NONE', *, *, #1618, .T. ) ; +#3105 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -11.44630387609749900, 65.00001676643944400 ) ) ; +#3106 = CARTESIAN_POINT ( 'NONE', ( 13.26972189700091500, -10.48186707534378600, -10.77203695102143200 ) ) ; +#3107 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -11.44630387609749900, 65.00001676643944400 ) ) ; +#3108 = CARTESIAN_POINT ( 'NONE', ( 1.791625674340192800, -12.96664603309567800, -12.54328693733198300 ) ) ; +#3109 = ORIENTED_EDGE ( 'NONE', *, *, #1364, .F. ) ; +#3110 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#3111 = EDGE_CURVE ( 'NONE', #951, #4091, #424, .T. ) ; +#3112 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, -16.84376276178052500 ) ) ; +#3113 = ORIENTED_EDGE ( 'NONE', *, *, #563, .T. ) ; +#3114 = AXIS2_PLACEMENT_3D ( 'NONE', #934, #4545, #2449 ) ; +#3115 = ORIENTED_EDGE ( 'NONE', *, *, #830, .T. ) ; +#3116 = CARTESIAN_POINT ( 'NONE', ( 0.8080998924569550200, 3.796410373064105700, 12.34010001015364100 ) ) ; +#3117 = ORIENTED_EDGE ( 'NONE', *, *, #252, .F. ) ; +#3118 = PLANE ( 'NONE', #3666 ) ; +#3119 = VERTEX_POINT ( 'NONE', #1796 ) ; +#3120 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -5.711846095760980000, -9.273070689112936200 ) ) ; +#3121 = ORIENTED_EDGE ( 'NONE', *, *, #456, .F. ) ; +#3122 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.5277777777777772400, -0.8493824917455923300 ) ) ; +#3123 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914452713700, 3.244746686838853500, -13.76770913345428200 ) ) ; +#3124 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -8.561776163818310100, -13.38134266248358300 ) ) ; +#3125 = ORIENTED_EDGE ( 'NONE', *, *, #2792, .T. ) ; +#3126 = ORIENTED_EDGE ( 'NONE', *, *, #4591, .T. ) ; +#3127 = ORIENTED_EDGE ( 'NONE', *, *, #2822, .F. ) ; +#3128 = AXIS2_PLACEMENT_3D ( 'NONE', #2452, #124, #2809 ) ; +#3129 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 12.49999753194997600, -9.999983233560549000 ) ) ; +#3130 = CARTESIAN_POINT ( 'NONE', ( -0.04251643309646762500, -10.09991806133117200, -11.71494764852129600 ) ) ; +#3131 = VERTEX_POINT ( 'NONE', #156 ) ; +#3132 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 15.00001676643945100 ) ) ; +#3133 = ORIENTED_EDGE ( 'NONE', *, *, #523, .F. ) ; +#3134 = DIRECTION ( 'NONE', ( 7.228014483236695800E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3135 = CARTESIAN_POINT ( 'NONE', ( -1.233065941752318000, 5.804131285567759600, 12.02033763633661900 ) ) ; +#3136 = PERSON_AND_ORGANIZATION ( #2110, #4573 ) ; +#3137 = VERTEX_POINT ( 'NONE', #579 ) ; +#3138 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999994700, 26.77590825245414800, 41.25001676643945100 ) ) ; +#3139 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, -15.49639287651101900, 25.82106484927767200 ) ) ; +#3140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3141 = ORIENTED_EDGE ( 'NONE', *, *, #844, .T. ) ; +#3142 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3143 = ADVANCED_FACE ( 'NONE', ( #1021, #2218 ), #3194, .T. ) ; +#3144 = EDGE_CURVE ( 'NONE', #541, #2362, #1367, .T. ) ; +#3145 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949972100, -15.44080068533170500 ) ) ; +#3146 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 7.499997531949969900, 6.500016766439452800 ) ) ; +#3147 = CARTESIAN_POINT ( 'NONE', ( -5.867552948079758200E-014, -9.482166672492482500, -14.00853508759279400 ) ) ; +#3148 = ORIENTED_EDGE ( 'NONE', *, *, #533, .F. ) ; +#3149 = CARTESIAN_POINT ( 'NONE', ( 14.00518046759580500, -12.12822347440051600, -10.77569419698733600 ) ) ; +#3150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3151 = EDGE_CURVE ( 'NONE', #2972, #541, #2828, .T. ) ; +#3152 = CARTESIAN_POINT ( 'NONE', ( -4.279904988367039000, 7.499997531949487600, 8.220111778072414700 ) ) ; +#3153 = PLANE ( 'NONE', #2450 ) ; +#3154 = AXIS2_PLACEMENT_3D ( 'NONE', #2244, #1106, #711 ) ; +#3155 = CARTESIAN_POINT ( 'NONE', ( 13.20837432565980600, -12.96664603309567800, -12.54328693733198300 ) ) ; +#3156 = CARTESIAN_POINT ( 'NONE', ( 14.33012701892219300, -11.63176217742977200, -14.39404467726971100 ) ) ; +#3157 = CARTESIAN_POINT ( 'NONE', ( 10.60208186243800700, 20.94988510403725400, 69.40784625110310900 ) ) ; +#3158 = CARTESIAN_POINT ( 'NONE', ( 2.200163658383562600, -13.43404781253737200, -4.499258150870311100 ) ) ; +#3159 = CARTESIAN_POINT ( 'NONE', ( 14.35034572648713100, -13.11737994431847900, 7.415429138009334200 ) ) ; +#3160 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949970300, 2.891202939038461200E-016 ) ) ; +#3161 = ORIENTED_EDGE ( 'NONE', *, *, #1364, .T. ) ; +#3162 = AXIS2_PLACEMENT_3D ( 'NONE', #4673, #693, #3632 ) ; +#3163 = CARTESIAN_POINT ( 'NONE', ( 13.26972189700091500, -11.43587127126034600, -11.07183020340313100 ) ) ; +#3164 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -5.711846095760980000, -15.27307068911293600 ) ) ; +#3165 = EDGE_LOOP ( 'NONE', ( #2683, #4228, #3661, #3048 ) ) ; +#3166 = CARTESIAN_POINT ( 'NONE', ( 2.173001530482503000, -13.35464150923956200, -5.679779045189393500 ) ) ; +#3167 = ORIENTED_EDGE ( 'NONE', *, *, #655, .T. ) ; +#3168 = CARTESIAN_POINT ( 'NONE', ( 12.56243669495628400, 24.26050969153109400, 70.14902928892328800 ) ) ; +#3169 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3170 = ORIENTED_EDGE ( 'NONE', *, *, #2345, .F. ) ; +#3171 = CARTESIAN_POINT ( 'NONE', ( 2.648080309454712300, -11.44174546892254600, -6.366438380985891300 ) ) ; +#3172 = ORIENTED_EDGE ( 'NONE', *, *, #1011, .F. ) ; +#3173 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #287, #4013, #4365, #2257 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009167149524453654200 ), + .UNSPECIFIED. ) ; +#3174 = EDGE_CURVE ( 'NONE', #2306, #2840, #4707, .T. ) ; +#3175 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3176 = EDGE_LOOP ( 'NONE', ( #2307, #4012, #3068, #1647 ) ) ; +#3177 = VERTEX_POINT ( 'NONE', #3565 ) ; +#3178 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #509, #697, ( #4544 ) ) ; +#3179 = ORIENTED_EDGE ( 'NONE', *, *, #1589, .F. ) ; +#3180 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949969000, 13.50001676643945100 ) ) ; +#3181 = ORIENTED_EDGE ( 'NONE', *, *, #858, .F. ) ; +#3182 = AXIS2_PLACEMENT_3D ( 'NONE', #2592, #293, #2940 ) ; +#3183 = ORIENTED_EDGE ( 'NONE', *, *, #2351, .T. ) ; +#3184 = VERTEX_POINT ( 'NONE', #4274 ) ; +#3185 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#3186 = ORIENTED_EDGE ( 'NONE', *, *, #691, .F. ) ; +#3187 = CARTESIAN_POINT ( 'NONE', ( 12.57814043268610700, 22.03060756486549800, 69.55160501238766800 ) ) ; +#3188 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, -23.22509174754585400, -9.999983233560550700 ) ) ; +#3189 = CIRCLE ( 'NONE', #1042, 1.000000000000000900 ) ; +#3190 = ORIENTED_EDGE ( 'NONE', *, *, #1377, .F. ) ; +#3191 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3192 = AXIS2_PLACEMENT_3D ( 'NONE', #4715, #2620, #329 ) ; +#3193 = CARTESIAN_POINT ( 'NONE', ( -0.08687041219609592500, -11.00735545183432700, -8.884489151017684000 ) ) ; +#3194 = PLANE ( 'NONE', #726 ) ; +#3195 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#3196 = ORIENTED_EDGE ( 'NONE', *, *, #1893, .F. ) ; +#3197 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999997300, 7.499997531949972500, -7.834640608427718300 ) ) ; +#3198 = LINE ( 'NONE', #3129, #432 ) ; +#3199 = EDGE_LOOP ( 'NONE', ( #2094, #2107, #2118, #2140, #2150, #2163, #2193, #2198 ) ) ; +#3200 = CARTESIAN_POINT ( 'NONE', ( 15.11432215961665400, -11.57222872160662600, 8.350916040883818800 ) ) ; +#3201 = ORIENTED_EDGE ( 'NONE', *, *, #666, .F. ) ; +#3202 = CIRCLE ( 'NONE', #1794, 0.9999999999999997800 ) ; +#3203 = CARTESIAN_POINT ( 'NONE', ( 10.60208186243800700, 20.94988510403725400, 69.40784625110310900 ) ) ; +#3204 = CARTESIAN_POINT ( 'NONE', ( 13.99999999083825100, -8.795179185592726200, -13.21942974774911800 ) ) ; +#3205 = AXIS2_PLACEMENT_3D ( 'NONE', #1357, #3861, #1756 ) ; +#3206 = CARTESIAN_POINT ( 'NONE', ( 12.38888989613903400, -13.52666825694283600, -11.77325955468895200 ) ) ; +#3207 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, -16.84376276178052500 ) ) ; +#3208 = CARTESIAN_POINT ( 'NONE', ( 3.247924541575701000, 22.14964511296470900, 70.04403730838532700 ) ) ; +#3209 = CARTESIAN_POINT ( 'NONE', ( -3.578897506915919000, 7.393692747906611900, -9.018892685997743200 ) ) ; +#3210 = AXIS2_PLACEMENT_3D ( 'NONE', #2574, #272, #2930 ) ; +#3211 = ADVANCED_FACE ( 'NONE', ( #4741 ), #978, .F. ) ; +#3212 = CARTESIAN_POINT ( 'NONE', ( 14.96820797551263000, -11.85655414990452200, 10.64960541924407900 ) ) ; +#3213 = CIRCLE ( 'NONE', #115, 1.200000000000004800 ) ; +#3214 = DIRECTION ( 'NONE', ( 1.000000000000000000, -2.006177025403371000E-032, 1.734723475976807300E-016 ) ) ; +#3215 = ORIENTED_EDGE ( 'NONE', *, *, #736, .T. ) ; +#3216 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3217 = AXIS2_PLACEMENT_3D ( 'NONE', #3377, #1202, #3716 ) ; +#3218 = CARTESIAN_POINT ( 'NONE', ( 2.406454005726564200, 22.05412407242634000, 69.54812132447398200 ) ) ; +#3219 = CARTESIAN_POINT ( 'NONE', ( 15.04243826064805100, -10.10169465303679600, -11.71147271384442900 ) ) ; +#3220 = FACE_OUTER_BOUND ( 'NONE', #4338, .T. ) ; +#3221 = ORIENTED_EDGE ( 'NONE', *, *, #1377, .T. ) ; +#3222 = CARTESIAN_POINT ( 'NONE', ( 1.575348587719996600, 7.499997531949971700, -8.003269003328144400 ) ) ; +#3223 = CARTESIAN_POINT ( 'NONE', ( 1.608992567697212300, 24.09661270217855700, 69.36571419598161000 ) ) ; +#3224 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #738, #2969, #3332, #1156, #3683, #1569, #4043, #1937, #4391, #2281, #4721, #2631 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001124684479296012300, 0.002249368958592024600, 0.003374053437888036700, 0.003936395677536043400, 0.004498737917184050100 ), + .UNSPECIFIED. ) ; +#3225 = CARTESIAN_POINT ( 'NONE', ( -0.9332171984574492200, 5.423856986062872000, -12.71477997027919000 ) ) ; +#3226 = CARTESIAN_POINT ( 'NONE', ( -0.1633772562106716500, -11.63176217742977400, 3.525683648003335800 ) ) ; +#3227 = ORIENTED_EDGE ( 'NONE', *, *, #3736, .T. ) ; +#3228 = CARTESIAN_POINT ( 'NONE', ( 3.375252857700714100, 6.747595387856065100, -10.47242612937174400 ) ) ; +#3229 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000008900, 9.099997531949975700, -1.809983233560547900 ) ) ; +#3230 = ORIENTED_EDGE ( 'NONE', *, *, #2471, .F. ) ; +#3231 = CARTESIAN_POINT ( 'NONE', ( 1.505773478662130800, 7.499997531949971700, -7.847550563661544100 ) ) ; +#3232 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#3233 = VERTEX_POINT ( 'NONE', #192 ) ; +#3234 = CARTESIAN_POINT ( 'NONE', ( 14.08715237125116300, -12.01189854471798700, -11.07183020340312600 ) ) ; +#3235 = ORIENTED_EDGE ( 'NONE', *, *, #861, .F. ) ; +#3236 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2359, #1244, #1661, #22, #2712, #431, #3058, #849, #3434, #1264, #3773, #1677, #4137, #2030, #4487, #2379 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 4 ), + ( 2.118522938825959400E-033, 0.0004945397021370938000, 0.0009890794042741876100, 0.001483619106411281500, 0.001978158808548375200, 0.002967238212822563000, 0.003461777914959656700, 0.003956317617096750400 ), + .UNSPECIFIED. ) ; +#3237 = ORIENTED_EDGE ( 'NONE', *, *, #783, .F. ) ; +#3238 = ORIENTED_EDGE ( 'NONE', *, *, #1683, .F. ) ; +#3239 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -5.711846095760980000, -9.273070689112936200 ) ) ; +#3240 = CARTESIAN_POINT ( 'NONE', ( 2.472712260164180900, 8.225337921206092400, -7.507644133919037600 ) ) ; +#3241 = CARTESIAN_POINT ( 'NONE', ( 14.00755175911287300, 2.627288019610017200, -12.87978940825534300 ) ) ; +#3242 = EDGE_LOOP ( 'NONE', ( #102, #144, #173, #240 ) ) ; +#3243 = EDGE_CURVE ( 'NONE', #3413, #3875, #4690, .T. ) ; +#3244 = CARTESIAN_POINT ( 'NONE', ( 2.004677504505199400, -13.43056383659591000, -2.439466842739803600 ) ) ; +#3245 = ORIENTED_EDGE ( 'NONE', *, *, #545, .T. ) ; +#3246 = ORIENTED_EDGE ( 'NONE', *, *, #376, .F. ) ; +#3247 = AXIS2_PLACEMENT_3D ( 'NONE', #483, #4197, #2093 ) ; +#3248 = ORIENTED_EDGE ( 'NONE', *, *, #1397, .F. ) ; +#3249 = CARTESIAN_POINT ( 'NONE', ( -25.19174207655504500, 12.49999753194996700, 17.32812514619638100 ) ) ; +#3250 = VERTEX_POINT ( 'NONE', #1446 ) ; +#3251 = AXIS2_PLACEMENT_3D ( 'NONE', #1868, #256, #2916 ) ; +#3252 = CARTESIAN_POINT ( 'NONE', ( 12.93980273777880000, -10.88156020199350700, -9.380775979151037400 ) ) ; +#3253 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 7.006802532810656500, -8.999983233560547200 ) ) ; +#3254 = PERSON_AND_ORGANIZATION ( #2110, #4573 ) ; +#3255 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.559374635020935700E-016, 1.000000000000000000 ) ) ; +#3256 = VERTEX_POINT ( 'NONE', #1842 ) ; +#3257 = CIRCLE ( 'NONE', #1879, 3.189999999999994200 ) ; +#3258 = AXIS2_PLACEMENT_3D ( 'NONE', #2549, #3262, #4644 ) ; +#3259 = CARTESIAN_POINT ( 'NONE', ( 12.69065525785925900, -11.63176217742977200, 0.3161868632211346500 ) ) ; +#3260 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -5.711846095760980000, -15.27307068911293600 ) ) ; +#3261 = ORIENTED_EDGE ( 'NONE', *, *, #3300, .F. ) ; +#3262 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3263 = DIRECTION ( 'NONE', ( 3.513437568363591100E-015, -0.6206261085816926500, -0.7841066466666031200 ) ) ; +#3264 = FACE_OUTER_BOUND ( 'NONE', #3868, .T. ) ; +#3265 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3266 = ORIENTED_EDGE ( 'NONE', *, *, #699, .F. ) ; +#3267 = CARTESIAN_POINT ( 'NONE', ( 2.604241123197339900, -13.52899477137446900, -11.76079916528643900 ) ) ; +#3268 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1646, #3033, #4104 ), + ( #2005, #4464, #2346 ), + ( #9, #2700, #418 ), + ( #3047, #838, #3422 ), + ( #1249, #3760, #1665 ), + ( #4121, #2019, #4477 ), + ( #2368, #27, #2716 ), + ( #438, #3066, #855 ), + ( #3439, #1273, #3780 ), + ( #1681, #4142, #2038 ), + ( #4492, #2383, #47 ), + ( #2734, #455, #3085 ), + ( #879, #3453, #1294 ), + ( #3802, #1703, #4158 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0008083120143097513500, 0.001212468021464626900, 0.001616624028619502700, 0.002020780035774378100, 0.002424936042929253800, 0.003233248057239005400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7161559752643339400, 1.000000000000000000), + ( 1.000000000000000000, 0.7314981883747754300, 1.000000000000000000), + ( 1.000000000000000000, 0.7584073573077281200, 1.000000000000000000), + ( 1.000000000000000000, 0.7678987023657595200, 1.000000000000000000), + ( 1.000000000000000000, 0.7872096795397258700, 1.000000000000000000), + ( 1.000000000000000000, 0.7970854563864200300, 1.000000000000000000), + ( 1.000000000000000000, 0.8157871993414544900, 1.000000000000000000), + ( 1.000000000000000000, 0.8247062254913435400, 1.000000000000000000), + ( 1.000000000000000000, 0.8410957402234600100, 1.000000000000000000), + ( 1.000000000000000000, 0.8485066680927705300, 1.000000000000000000), + ( 1.000000000000000000, 0.8667326015389981200, 1.000000000000000000), + ( 1.000000000000000000, 0.8740195597573721100, 1.000000000000000000), + ( 1.000000000000000000, 0.8739442499921844500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3269 = CARTESIAN_POINT ( 'NONE', ( 15.37642583287850200, -11.48524243122819900, -6.016211726984540300 ) ) ; +#3270 = CARTESIAN_POINT ( 'NONE', ( 14.00251778127846000, 2.527048817758953200, -12.89746428406637000 ) ) ; +#3271 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669294400, -0.9848077530122082400 ) ) ; +#3272 = EDGE_CURVE ( 'NONE', #3531, #2787, #4564, .T. ) ; +#3273 = CARTESIAN_POINT ( 'NONE', ( 10.67438930411484300, 21.00526717239642200, 69.96593655342987000 ) ) ; +#3274 = CARTESIAN_POINT ( 'NONE', ( 15.17176024701291900, -11.63176217742978100, 7.335571684581782200 ) ) ; +#3275 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3276 = CARTESIAN_POINT ( 'NONE', ( 0.5488587006889198400, -13.05244709932581100, 8.091757272287258800 ) ) ; +#3277 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -4.843605207426332300, -14.19710945417397800 ) ) ; +#3278 = CARTESIAN_POINT ( 'NONE', ( 15.05577622914452700, 3.244746686838852100, -13.76770913345428000 ) ) ; +#3279 = CYLINDRICAL_SURFACE ( 'NONE', #132, 10.02277622698500400 ) ; +#3280 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -6.631762177429775000, 7.500016766439451900 ) ) ; +#3281 = ORIENTED_EDGE ( 'NONE', *, *, #3985, .T. ) ; +#3282 = CARTESIAN_POINT ( 'NONE', ( 12.79765381751031100, -13.41873340374037800, -4.804751866192646900 ) ) ; +#3283 = VERTEX_POINT ( 'NONE', #4292 ) ; +#3284 = AXIS2_PLACEMENT_3D ( 'NONE', #632, #211, #2178 ) ; +#3285 = CARTESIAN_POINT ( 'NONE', ( 10.35821342481672100, 20.14800680568141900, 70.00001676643945800 ) ) ; +#3286 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3287 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000200, 2.499997531949969000, 12.50001676643944900 ) ) ; +#3288 = ORIENTED_EDGE ( 'NONE', *, *, #1748, .F. ) ; +#3289 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999997300, 7.499997531949970800, 3.180326087198524600E-015 ) ) ; +#3290 = ORIENTED_EDGE ( 'NONE', *, *, #772, .F. ) ; +#3291 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3292 = ORIENTED_EDGE ( 'NONE', *, *, #274, .F. ) ; +#3293 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#3294 = EDGE_LOOP ( 'NONE', ( #1595, #1612, #1658, #1711 ) ) ; +#3295 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -10.55229541076278600, 10.60314730934792000 ) ) ; +#3296 = ORIENTED_EDGE ( 'NONE', *, *, #967, .T. ) ; +#3297 = ADVANCED_FACE ( 'NONE', ( #2718 ), #4478, .T. ) ; +#3298 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3299 = VERTEX_POINT ( 'NONE', #1472 ) ; +#3300 = EDGE_CURVE ( 'NONE', #3063, #3119, #2722, .T. ) ; +#3301 = ORIENTED_EDGE ( 'NONE', *, *, #158, .F. ) ; +#3302 = ORIENTED_EDGE ( 'NONE', *, *, #1407, .T. ) ; +#3303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9809572502584816800, -0.1942237708554717700 ) ) ; +#3304 = ORIENTED_EDGE ( 'NONE', *, *, #1583, .F. ) ; +#3305 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -4.999983233560542800 ) ) ; +#3306 = CARTESIAN_POINT ( 'NONE', ( 15.25536947755680100, 4.111075824982010300, 13.19357339337111600 ) ) ; +#3307 = VERTEX_POINT ( 'NONE', #4334 ) ; +#3308 = AXIS2_PLACEMENT_3D ( 'NONE', #4616, #2806, #4631 ) ; +#3309 = VECTOR ( 'NONE', #3042, 1000.000000000000000 ) ; +#3310 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.087887087724744200, -9.342762761780534200 ) ) ; +#3311 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3312 = CARTESIAN_POINT ( 'NONE', ( 13.44622222222222500, 24.54967267495042500, 69.35280431832382000 ) ) ; +#3313 = ORIENTED_EDGE ( 'NONE', *, *, #2222, .T. ) ; +#3314 = CARTESIAN_POINT ( 'NONE', ( 13.04804676094282100, 7.064381119176101900, -9.882132056938452500 ) ) ; +#3315 = ORIENTED_EDGE ( 'NONE', *, *, #902, .F. ) ; +#3316 = CIRCLE ( 'NONE', #976, 3.189999999999994200 ) ; +#3317 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#3318 = CARTESIAN_POINT ( 'NONE', ( 12.52726370331008900, 8.225751928781445300, -7.507613438272375800 ) ) ; +#3319 = ORIENTED_EDGE ( 'NONE', *, *, #348, .F. ) ; +#3320 = CARTESIAN_POINT ( 'NONE', ( 1.103447320788109900, -11.15051657878968200, 9.658266485786688400 ) ) ; +#3321 = DIRECTION ( 'NONE', ( -0.9888447541710943000, -0.1489498309777759500, 0.0000000000000000000 ) ) ; +#3322 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000000, 2.499997531949969900, 13.50001676643945100 ) ) ; +#3323 = EDGE_LOOP ( 'NONE', ( #1409, #1460, #1474, #1475, #1510, #1522 ) ) ; +#3324 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000200, -7.439339082167632200, 15.12423835079899500 ) ) ; +#3325 = VECTOR ( 'NONE', #3029, 1000.000000000000000 ) ; +#3326 = CARTESIAN_POINT ( 'NONE', ( 16.31271967843564500, 6.498331742512228900, 10.57275036774266900 ) ) ; +#3327 = CARTESIAN_POINT ( 'NONE', ( 1.904660851323801900, 24.27357487202548100, 69.63147614422659600 ) ) ; +#3328 = CARTESIAN_POINT ( 'NONE', ( 14.01750224819370900, 2.833683172636250400, -12.84339637408936400 ) ) ; +#3329 = CARTESIAN_POINT ( 'NONE', ( 12.19730936237501800, 21.52208996529064700, 69.63742758959497800 ) ) ; +#3330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3331 = EDGE_CURVE ( 'NONE', #4696, #3233, #3409, .T. ) ; +#3332 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, 21.30568162861155200, 65.03282036875654600 ) ) ; +#3333 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ; +#3334 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000001100, 7.499997531949969000, 7.500016766439442200 ) ) ; +#3335 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 23.15026480919374000, 65.41408628010714200 ) ) ; +#3336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3337 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #3742, #2595, ( #1421 ) ) ; +#3338 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999996400, -23.22409174754586300, 15.00001676643945300 ) ) ; +#3339 = VECTOR ( 'NONE', #3040, 1000.000000000000000 ) ; +#3340 = EDGE_LOOP ( 'NONE', ( #4296, #4073, #3126, #1200, #228, #2203 ) ) ; +#3341 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 22.82089127764480100, 68.26935383964060100 ) ) ; +#3342 = ORIENTED_EDGE ( 'NONE', *, *, #1425, .T. ) ; +#3343 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -4.999983233560542800 ) ) ; +#3344 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1788, #1387, #4231, #2136 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.570796326794896800, 2.992086482045221500 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8386274899012953200, 0.8386274899012953200, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#3345 = AXIS2_PLACEMENT_3D ( 'NONE', #3989, #1885, #4339 ) ; +#3346 = ORIENTED_EDGE ( 'NONE', *, *, #1002, .T. ) ; +#3347 = ORIENTED_EDGE ( 'NONE', *, *, #3272, .F. ) ; +#3348 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000200, 23.14482457645993900, 65.41031487557552300 ) ) ; +#3349 = ORIENTED_EDGE ( 'NONE', *, *, #1435, .F. ) ; +#3350 = CARTESIAN_POINT ( 'NONE', ( -2.700603951073382500E-016, 20.87127743629173100, 68.88423750972401600 ) ) ; +#3351 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -14.13176217742977600, -2.203671148763222300E-015 ) ) ; +#3352 = CARTESIAN_POINT ( 'NONE', ( 0.5952528347831566000, 4.399954062413094400, -12.49735130408019900 ) ) ; +#3353 = ORIENTED_EDGE ( 'NONE', *, *, #2104, .F. ) ; +#3354 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#3355 = ORIENTED_EDGE ( 'NONE', *, *, #902, .T. ) ; +#3356 = CARTESIAN_POINT ( 'NONE', ( 12.60160000000000100, 24.99999753194998300, 67.50001676643944400 ) ) ; +#3357 = ORIENTED_EDGE ( 'NONE', *, *, #3151, .T. ) ; +#3358 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 22.04668205197670300, 65.14646024778785700 ) ) ; +#3359 = VERTEX_POINT ( 'NONE', #3645 ) ; +#3360 = EDGE_LOOP ( 'NONE', ( #2267, #2294, #2314, #2319, #739, #690, #2355, #2363 ) ) ; +#3361 = CARTESIAN_POINT ( 'NONE', ( 14.99631318130066200, 2.494636376850953400, -12.90317947190856500 ) ) ; +#3362 = ORIENTED_EDGE ( 'NONE', *, *, #3652, .T. ) ; +#3363 = EDGE_CURVE ( 'NONE', #3459, #2474, #2236, .T. ) ; +#3364 = VERTEX_POINT ( 'NONE', #267 ) ; +#3365 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 65.73015992574794100 ) ) ; +#3366 = AXIS2_PLACEMENT_3D ( 'NONE', #3164, #968, #3530 ) ; +#3367 = CARTESIAN_POINT ( 'NONE', ( 39.10520143347351800, 12.49999753194996900, 15.48406511234563300 ) ) ; +#3368 = CARTESIAN_POINT ( 'NONE', ( 14.08715237125114200, -12.01189854471799200, -11.07183020340313300 ) ) ; +#3369 = ORIENTED_EDGE ( 'NONE', *, *, #1407, .F. ) ; +#3370 = VERTEX_POINT ( 'NONE', #2587 ) ; +#3371 = AXIS2_PLACEMENT_3D ( 'NONE', #4209, #3860, #3140 ) ; +#3372 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949970800, 2.891202939038459700E-016 ) ) ; +#3373 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 17.50001676643945100 ) ) ; +#3374 = VECTOR ( 'NONE', #3049, 1000.000000000000000 ) ; +#3375 = CARTESIAN_POINT ( 'NONE', ( 12.26136253360270700, -11.62689207052435600, -3.847444392372395800 ) ) ; +#3376 = ORIENTED_EDGE ( 'NONE', *, *, #142, .F. ) ; +#3377 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -4.999983233560542800 ) ) ; +#3378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#3379 = EDGE_LOOP ( 'NONE', ( #1521, #2803, #1644, #3007 ) ) ; +#3380 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 12.49999753194997300, 20.00001676643945100 ) ) ; +#3381 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, 2.499997531949971700, -12.90223415561734700 ) ) ; +#3382 = DIRECTION ( 'NONE', ( 0.1473245215649230900, 0.9780546869635324800, 0.1473245215649227600 ) ) ; +#3383 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949976100, -14.99998323356054400 ) ) ; +#3384 = DIRECTION ( 'NONE', ( 0.6080605814720900800, 0.7938906280211548400, 0.0000000000000000000 ) ) ; +#3385 = CARTESIAN_POINT ( 'NONE', ( 14.77849395844469700, -10.61013386888315900, -13.12566136476456400 ) ) ; +#3386 = EDGE_CURVE ( 'NONE', #4640, #3137, #3173, .T. ) ; +#3387 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#3388 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 9.999997531949972500, -14.99998323356054400 ) ) ; +#3389 = VECTOR ( 'NONE', #1209, 1000.000000000000200 ) ; +#3390 = VERTEX_POINT ( 'NONE', #1911 ) ; +#3391 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949969000, 15.00001676643945100 ) ) ; +#3392 = EDGE_CURVE ( 'NONE', #4571, #3910, #2894, .T. ) ; +#3393 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.25516839058952500, 65.66925009504996100 ) ) ; +#3394 = CARTESIAN_POINT ( 'NONE', ( 0.9924482408871261300, 2.627288019610017200, -12.87978940825534300 ) ) ; +#3395 = VERTEX_POINT ( 'NONE', #1102 ) ; +#3396 = CARTESIAN_POINT ( 'NONE', ( 13.10426830535737400, -13.41469245974220700, -1.537002540140261600 ) ) ; +#3397 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3398 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.6206261085816935400, -0.7841066466666024600 ) ) ; +#3399 = DIRECTION ( 'NONE', ( 0.8948828787403930700, -0.4463010568409033800, 0.0000000000000000000 ) ) ; +#3400 = ORIENTED_EDGE ( 'NONE', *, *, #1356, .T. ) ; +#3401 = AXIS2_PLACEMENT_3D ( 'NONE', #524, #938, #3504 ) ; +#3402 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999997800, 7.040985457330475800, -9.999983233560550700 ) ) ; +#3403 = EDGE_LOOP ( 'NONE', ( #367, #372 ) ) ; +#3404 = CARTESIAN_POINT ( 'NONE', ( 0.9128476287488566100, -12.01189854471799200, -11.07183020340313300 ) ) ; +#3405 = VERTEX_POINT ( 'NONE', #1159 ) ; +#3406 = ORIENTED_EDGE ( 'NONE', *, *, #915, .F. ) ; +#3407 = AXIS2_PLACEMENT_3D ( 'NONE', #2325, #1207, #2671 ) ; +#3408 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 9.999997531949970800, 15.00001676643945500 ) ) ; +#3409 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #2571, #4670, #1516, #3996 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 1.520618829230439000, 1.570796326794896600 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9997901959002109000, 0.9997901959002109000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#3410 = ORIENTED_EDGE ( 'NONE', *, *, #325, .F. ) ; +#3411 = VERTEX_POINT ( 'NONE', #740 ) ; +#3412 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.131762177429775900, -16.19731048123461300 ) ) ; +#3413 = VERTEX_POINT ( 'NONE', #4694 ) ; +#3414 = CARTESIAN_POINT ( 'NONE', ( 0.08393443629627650400, -10.07303444567222600, -15.70191471894374200 ) ) ; +#3415 = CARTESIAN_POINT ( 'NONE', ( 0.9924482408871252400, 2.627288019610017700, -12.87978940825534500 ) ) ; +#3416 = VERTEX_POINT ( 'NONE', #4044 ) ; +#3417 = PLANE ( 'NONE', #420 ) ; +#3418 = VERTEX_POINT ( 'NONE', #1938 ) ; +#3419 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ; +#3420 = CARTESIAN_POINT ( 'NONE', ( 3.233406507030408800, 7.638656933908675000, -9.966115798294728400 ) ) ; +#3421 = ORIENTED_EDGE ( 'NONE', *, *, #175, .F. ) ; +#3422 = CARTESIAN_POINT ( 'NONE', ( 13.29783907041179900, 7.199953577281007700, -9.543879433106608800 ) ) ; +#3423 = ORIENTED_EDGE ( 'NONE', *, *, #830, .F. ) ; +#3424 = EDGE_CURVE ( 'NONE', #4245, #2301, #2230, .T. ) ; +#3425 = LINE ( 'NONE', #3541, #4238 ) ; +#3426 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -14.13176217742977400, -11.35960056912454300 ) ) ; +#3427 = ORIENTED_EDGE ( 'NONE', *, *, #915, .T. ) ; +#3428 = CARTESIAN_POINT ( 'NONE', ( 13.49422652133792900, 7.499997531949971700, -7.847550563661572600 ) ) ; +#3429 = CARTESIAN_POINT ( 'NONE', ( 15.72106824384819200, 5.129270421443453500, -12.11357236457952200 ) ) ; +#3430 = CARTESIAN_POINT ( 'NONE', ( 13.20837432565980600, -12.96664603309567800, -12.54328693733198300 ) ) ; +#3431 = AXIS2_PLACEMENT_3D ( 'NONE', #1775, #4221, #2126 ) ; +#3432 = VERTEX_POINT ( 'NONE', #4393 ) ; +#3433 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#3434 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -8.544352098957913800, 15.83566110849775700 ) ) ; +#3435 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #718, #3273, #2228 ), + ( #4668, #2569, #265 ), + ( #2925, #686, #3285 ), + ( #1100, #3643, #1514 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( -9.885755408722829400E-016, 0.001072180819809297300 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.6624054580141199900, 1.000000000000000000), + ( 1.000000000000000000, 0.6806137855510096000, 1.000000000000000000), + ( 1.000000000000000000, 0.6957923987089202900, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3436 = CIRCLE ( 'NONE', #1298, 105.0000000000000100 ) ; +#3437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -8.019335917570373600E-017 ) ) ; +#3438 = CARTESIAN_POINT ( 'NONE', ( 2.580131322374943400, 7.249007408160611700, -9.469668561651042500 ) ) ; +#3439 = CARTESIAN_POINT ( 'NONE', ( 12.11809277636318800, 7.836975161672684800, -9.788768107958191000 ) ) ; +#3440 = AXIS2_PLACEMENT_3D ( 'NONE', #4749, #338, #1965 ) ; +#3441 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949976100, -14.99998323356054400 ) ) ; +#3442 = CARTESIAN_POINT ( 'NONE', ( 17.24638919865850500, 6.981645602646887400, -10.12931627621258600 ) ) ; +#3443 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 9.099997531949975700, -4.999983233560542800 ) ) ; +#3444 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3445 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999800, 24.70767846768083200, 68.12761677689829300 ) ) ; +#3446 = FACE_OUTER_BOUND ( 'NONE', #1527, .T. ) ; +#3447 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.631762177429775000, 13.50001676643945100 ) ) ; +#3448 = ORIENTED_EDGE ( 'NONE', *, *, #2936, .T. ) ; +#3449 = DIRECTION ( 'NONE', ( 1.000000000000000000, 6.938893903907228400E-016, 0.0000000000000000000 ) ) ; +#3450 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 12.49999753194997600, -4.999983233560542800 ) ) ; +#3451 = CARTESIAN_POINT ( 'NONE', ( 1.554020520001409700, 7.301125389737152600, -9.246405707388300100 ) ) ; +#3452 = FACE_OUTER_BOUND ( 'NONE', #295, .T. ) ; +#3453 = CARTESIAN_POINT ( 'NONE', ( 11.68518096364576100, 7.040985460828165000, -9.999983226127254100 ) ) ; +#3454 = ORIENTED_EDGE ( 'NONE', *, *, #1277, .T. ) ; +#3455 = CARTESIAN_POINT ( 'NONE', ( 13.51331298356338500, -11.63176217742977800, 7.783194055585497900 ) ) ; +#3456 = EDGE_LOOP ( 'NONE', ( #1216, #1267, #1332, #1349 ) ) ; +#3457 = AXIS2_PLACEMENT_3D ( 'NONE', #388, #3023, #806 ) ; +#3458 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 9.999997531949972500, -14.99998323356054700 ) ) ; +#3459 = VERTEX_POINT ( 'NONE', #2634 ) ; +#3460 = CARTESIAN_POINT ( 'NONE', ( 1.553777777777772800, 24.99999753194998300, 69.35280431832386200 ) ) ; +#3461 = ORIENTED_EDGE ( 'NONE', *, *, #1950, .T. ) ; +#3462 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, 2.499997531949972100, -13.91766076750309200 ) ) ; +#3463 = ORIENTED_EDGE ( 'NONE', *, *, #134, .F. ) ; +#3464 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.8216543946741290400, -0.5699860136114663900 ) ) ; +#3465 = CARTESIAN_POINT ( 'NONE', ( 1.259809051311962900E-015, -2.393208325788690200E-031, 15.00001676643945100 ) ) ; +#3466 = CARTESIAN_POINT ( 'NONE', ( 2.739641364931482100, -11.53625041415707000, -5.531774633908537600 ) ) ; +#3467 = VERTEX_POINT ( 'NONE', #1171 ) ; +#3468 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949970300, 2.891202939038461200E-016 ) ) ; +#3469 = ORIENTED_EDGE ( 'NONE', *, *, #1444, .F. ) ; +#3470 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -5.711846095760980000, -9.273070689112936200 ) ) ; +#3471 = ORIENTED_EDGE ( 'NONE', *, *, #931, .F. ) ; +#3472 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -15.69321633482545800, 67.63890565532833000 ) ) ; +#3473 = ORIENTED_EDGE ( 'NONE', *, *, #964, .T. ) ; +#3474 = ORIENTED_EDGE ( 'NONE', *, *, #52, .T. ) ; +#3475 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3476 = VERTEX_POINT ( 'NONE', #4722 ) ; +#3477 = CARTESIAN_POINT ( 'NONE', ( 12.47182418210678500, 8.259486314507912000, -9.267071425014336200 ) ) ; +#3478 = ORIENTED_EDGE ( 'NONE', *, *, #2881, .F. ) ; +#3479 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3480 = ORIENTED_EDGE ( 'NONE', *, *, #500, .F. ) ; +#3481 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3482 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 7.499997531949971700, -7.485159283662421900 ) ) ; +#3483 = ORIENTED_EDGE ( 'NONE', *, *, #1502, .T. ) ; +#3484 = CARTESIAN_POINT ( 'NONE', ( 2.624313590728013500, 23.44777953606405400, 69.03749868806072200 ) ) ; +#3485 = ORIENTED_EDGE ( 'NONE', *, *, #931, .T. ) ; +#3486 = CARTESIAN_POINT ( 'NONE', ( 0.9128476287488529500, -12.01189854471798700, -11.07183020340312900 ) ) ; +#3487 = CARTESIAN_POINT ( 'NONE', ( 0.5053355077038373900, -11.33299662852293500, -12.31771759077925100 ) ) ; +#3488 = VECTOR ( 'NONE', #768, 1000.000000000000000 ) ; +#3489 = EDGE_LOOP ( 'NONE', ( #3641, #3041, #4567, #4278 ) ) ; +#3490 = EDGE_CURVE ( 'NONE', #1071, #3875, #1894, .T. ) ; +#3491 = CARTESIAN_POINT ( 'NONE', ( -0.1647097930432799000, 3.838373829558305000, 12.33530697339594100 ) ) ; +#3492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3493 = AXIS2_PLACEMENT_3D ( 'NONE', #3614, #1490, #3976 ) ; +#3494 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #4544 ) ) ; +#3495 = CARTESIAN_POINT ( 'NONE', ( 1.186773099371301000, -9.583451901166556700, -12.44905008219207000 ) ) ; +#3496 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3497 = AXIS2_PLACEMENT_3D ( 'NONE', #2993, #1951, #1607 ) ; +#3498 = DIRECTION ( 'NONE', ( 1.368455531567204200E-048, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#3499 = CARTESIAN_POINT ( 'NONE', ( -0.4796791301028333600, 5.804131285567837800, 11.26695082468705600 ) ) ; +#3500 = FACE_OUTER_BOUND ( 'NONE', #2535, .T. ) ; +#3501 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3502 = EDGE_LOOP ( 'NONE', ( #990, #1014, #1019, #1065, #1072, #1090 ) ) ; +#3503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9393844695325593900, 0.3428655981591505200 ) ) ; +#3504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#3505 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000200, 5.428929720084492600, 12.50001676643944900 ) ) ; +#3506 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -5.711846095760980000, -9.273070689112936200 ) ) ; +#3507 = ORIENTED_EDGE ( 'NONE', *, *, #1397, .T. ) ; +#3508 = CARTESIAN_POINT ( 'NONE', ( 2.689997214450258900, -11.63176217742977600, -3.277205641478954300 ) ) ; +#3509 = CARTESIAN_POINT ( 'NONE', ( -6.657001339060997200E-014, -8.561776163818338500, -13.38134266248358500 ) ) ; +#3510 = EDGE_CURVE ( 'NONE', #4288, #3686, #730, .T. ) ; +#3511 = CARTESIAN_POINT ( 'NONE', ( 15.07777909603381300, -10.77608023605260900, -9.783319925755209900 ) ) ; +#3512 = ORIENTED_EDGE ( 'NONE', *, *, #1235, .T. ) ; +#3513 = AXIS2_PLACEMENT_3D ( 'NONE', #2459, #2817, #477 ) ; +#3514 = EDGE_LOOP ( 'NONE', ( #4234, #4248, #4284, #4290 ) ) ; +#3515 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000008900, 7.499997531949969000, 7.500016766439442200 ) ) ; +#3516 = EDGE_LOOP ( 'NONE', ( #2737, #2753, #2761, #2794 ) ) ; +#3517 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ; +#3518 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -15.49639287651101900, 25.82106484927767200 ) ) ; +#3519 = ORIENTED_EDGE ( 'NONE', *, *, #3831, .F. ) ; +#3520 = VERTEX_POINT ( 'NONE', #38 ) ; +#3521 = VERTEX_POINT ( 'NONE', #2696 ) ; +#3522 = AXIS2_PLACEMENT_3D ( 'NONE', #2659, #374, #3006 ) ; +#3523 = CARTESIAN_POINT ( 'NONE', ( -0.5080608747088872800, -11.59363873106265400, -4.672462991243358000 ) ) ; +#3524 = CARTESIAN_POINT ( 'NONE', ( 13.23250118236524000, -12.97345055811215000, -7.993661332075763700 ) ) ; +#3525 = EDGE_LOOP ( 'NONE', ( #2906, #4761, #1987, #3573 ) ) ; +#3526 = ORIENTED_EDGE ( 'NONE', *, *, #297, .F. ) ; +#3527 = ORIENTED_EDGE ( 'NONE', *, *, #972, .F. ) ; +#3528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9540041959165606000, 0.2997932523816985200 ) ) ; +#3529 = ORIENTED_EDGE ( 'NONE', *, *, #1980, .T. ) ; +#3530 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3531 = VERTEX_POINT ( 'NONE', #4055 ) ; +#3532 = CARTESIAN_POINT ( 'NONE', ( 1.519723418810280800, -11.63176217742977600, 7.500016766439451000 ) ) ; +#3533 = CARTESIAN_POINT ( 'NONE', ( 1.905071291828520900, -13.09714402649401600, -7.408105941440405600 ) ) ; +#3534 = CARTESIAN_POINT ( 'NONE', ( 12.37887578765741200, 23.45895815237146200, 69.03683938871618900 ) ) ; +#3535 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 7.499997531949971700, -7.485159283662415700 ) ) ; +#3536 = ORIENTED_EDGE ( 'NONE', *, *, #844, .F. ) ; +#3537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#3538 = EDGE_CURVE ( 'NONE', #3063, #621, #3763, .T. ) ; +#3539 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, -114.1317621774297500, -10.17982295743315100 ) ) ; +#3540 = CARTESIAN_POINT ( 'NONE', ( 2.060100387142229200, -13.24258708542478000, -6.519317994613135000 ) ) ; +#3541 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.631762177429775000, 12.50001676643945100 ) ) ; +#3542 = ORIENTED_EDGE ( 'NONE', *, *, #972, .T. ) ; +#3543 = CIRCLE ( 'NONE', #1456, 5.601600000000002100 ) ; +#3544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -8.019335917570373600E-017 ) ) ; +#3545 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949971700, -7.834640608427718300 ) ) ; +#3546 = CARTESIAN_POINT ( 'NONE', ( 4.929537168753320500, 20.58109555517909300, 69.50001675864507400 ) ) ; +#3547 = AXIS2_PLACEMENT_3D ( 'NONE', #3365, #1189, #3707 ) ; +#3548 = CARTESIAN_POINT ( 'NONE', ( 11.73482925812502800, 22.14761670679416400, 70.04368477441508400 ) ) ; +#3549 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 67.50001676643944400 ) ) ; +#3550 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3551 = VECTOR ( 'NONE', #4260, 1000.000000000000000 ) ; +#3552 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999998200, 7.499997531949972500, -7.834640608427718300 ) ) ; +#3553 = EDGE_LOOP ( 'NONE', ( #3526, #550, #1772 ) ) ; +#3554 = AXIS2_PLACEMENT_3D ( 'NONE', #720, #4030, #1922 ) ; +#3555 = CIRCLE ( 'NONE', #206, 5.000000000000000900 ) ; +#3556 = CARTESIAN_POINT ( 'NONE', ( 13.72878789582081200, -11.44720968644423200, 8.874763999786379600 ) ) ; +#3557 = ORIENTED_EDGE ( 'NONE', *, *, #3363, .T. ) ; +#3558 = CARTESIAN_POINT ( 'NONE', ( 12.17532467532467600, -10.69511892927340400, 161.9249932573022800 ) ) ; +#3559 = VERTEX_POINT ( 'NONE', #1245 ) ; +#3560 = CARTESIAN_POINT ( 'NONE', ( 11.00679128130450300, 20.55293979002667000, 69.89760508273241200 ) ) ; +#3561 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -9.481846338486152000, -14.00871286197048000 ) ) ; +#3562 = ORIENTED_EDGE ( 'NONE', *, *, #103, .F. ) ; +#3563 = ADVANCED_FACE ( 'NONE', ( #3762 ), #3417, .T. ) ; +#3564 = CARTESIAN_POINT ( 'NONE', ( 11.98466119389147300, -13.72355183346228300, -11.60903556250768900 ) ) ; +#3565 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999753194998300, 60.10161676643944900 ) ) ; +#3566 = CARTESIAN_POINT ( 'NONE', ( 3.102033096165514700, 22.38561199767174900, 69.13519206909408900 ) ) ; +#3567 = ORIENTED_EDGE ( 'NONE', *, *, #954, .T. ) ; +#3568 = EDGE_CURVE ( 'NONE', #880, #4696, #4377, .T. ) ; +#3569 = CARTESIAN_POINT ( 'NONE', ( -2.485665506065799900, 6.877746622471410600, -10.34897510236213400 ) ) ; +#3570 = ORIENTED_EDGE ( 'NONE', *, *, #823, .F. ) ; +#3571 = CARTESIAN_POINT ( 'NONE', ( 13.49999999999999800, 2.499997531949971200, -7.834640608427718300 ) ) ; +#3572 = ORIENTED_EDGE ( 'NONE', *, *, #166, .F. ) ; +#3573 = ORIENTED_EDGE ( 'NONE', *, *, #3, .F. ) ; +#3574 = CARTESIAN_POINT ( 'NONE', ( 15.04301456659963100, -10.76510830810538400, 10.33427687433401800 ) ) ; +#3575 = EDGE_LOOP ( 'NONE', ( #3478, #4652, #4066, #3519 ) ) ; +#3576 = AXIS2_PLACEMENT_3D ( 'NONE', #4736, #2651, #358 ) ; +#3577 = ORIENTED_EDGE ( 'NONE', *, *, #1980, .F. ) ; +#3578 = EDGE_LOOP ( 'NONE', ( #1394, #1650, #687, #4459, #2687, #949 ) ) ; +#3579 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -9.131762177429777700, -1.423983831252754500E-015 ) ) ; +#3580 = VERTEX_POINT ( 'NONE', #2361 ) ; +#3581 = CARTESIAN_POINT ( 'NONE', ( 1.980947789108597400, 22.82419939642227600, 69.45147738050691500 ) ) ; +#3582 = CARTESIAN_POINT ( 'NONE', ( 13.58175174281956100, -10.05224801759292100, -11.76984311337417700 ) ) ; +#3583 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3879, #4268, #189, #2865, #608, #3218, #1029, #3581, #1442, #3940, #1837, #4286 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 4.336808689942017700E-018, 0.001329919347052563900, 0.001994879020578843100, 0.002659838694105122200, 0.003989758041157690500, 0.005319677388210259200 ), + .UNSPECIFIED. ) ; +#3584 = ORIENTED_EDGE ( 'NONE', *, *, #2768, .T. ) ; +#3585 = CARTESIAN_POINT ( 'NONE', ( 2.398400001469025900, 24.62236279866527500, 70.15629358835926200 ) ) ; +#3586 = VERTEX_POINT ( 'NONE', #834 ) ; +#3587 = CARTESIAN_POINT ( 'NONE', ( -0.1198606381488898600, 5.423856986062849800, -11.90142340997028600 ) ) ; +#3588 = CARTESIAN_POINT ( 'NONE', ( 2.206110805570788100, -11.63176217742977200, 1.213657261804939000 ) ) ; +#3589 = ORIENTED_EDGE ( 'NONE', *, *, #793, .F. ) ; +#3590 = CARTESIAN_POINT ( 'NONE', ( 3.009404121787112400, 6.776873305458395600, -10.42478149579505400 ) ) ; +#3591 = ADVANCED_FACE ( 'NONE', ( #3446 ), #1914, .F. ) ; +#3592 = CYLINDRICAL_SURFACE ( 'NONE', #1173, 3.189999999999994200 ) ; +#3593 = CARTESIAN_POINT ( 'NONE', ( -23.65939391210395500, 12.49999753194997300, 15.23637856716838400 ) ) ; +#3594 = CARTESIAN_POINT ( 'NONE', ( 1.552188541999181900, 7.499997531949971700, -7.951348723847106100 ) ) ; +#3595 = ORIENTED_EDGE ( 'NONE', *, *, #568, .F. ) ; +#3596 = PLANE ( 'NONE', #4606 ) ; +#3597 = EDGE_CURVE ( 'NONE', #4091, #4451, #1684, .T. ) ; +#3598 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.069746143519031100E-014, -1.000000000000000000 ) ) ; +#3599 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 8.489810784768483400, -7.485159283662421900 ) ) ; +#3600 = CARTESIAN_POINT ( 'NONE', ( 14.06693147497343300, 3.244746686838853000, -12.77886437928318800 ) ) ; +#3601 = AXIS2_PLACEMENT_3D ( 'NONE', #1139, #3668, #1553 ) ; +#3602 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#3603 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3604 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3605 = CARTESIAN_POINT ( 'NONE', ( 13.67475636257552200, -12.53149609881886100, -9.628405428326773900 ) ) ; +#3606 = CARTESIAN_POINT ( 'NONE', ( 1.453433666111360300, -11.63176217742977400, 8.068230951964794800 ) ) ; +#3607 = AXIS2_PLACEMENT_3D ( 'NONE', #2483, #2141, #3835 ) ; +#3608 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 2.455444314826511500, -13.92551670175932100 ) ) ; +#3609 = ADVANCED_FACE ( 'NONE', ( #2608 ), #1799, .T. ) ; +#3610 = FACE_OUTER_BOUND ( 'NONE', #3553, .T. ) ; +#3611 = EDGE_LOOP ( 'NONE', ( #3133, #3141, #3148, #3170 ) ) ; +#3612 = CARTESIAN_POINT ( 'NONE', ( 13.36331907244379600, -13.36851081149648300, 0.2398087741017330100 ) ) ; +#3613 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 8.019335917570373600E-017, 1.000000000000000000 ) ) ; +#3614 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 20.00001676643945100 ) ) ; +#3615 = ORIENTED_EDGE ( 'NONE', *, *, #783, .T. ) ; +#3616 = CARTESIAN_POINT ( 'NONE', ( 14.06693147497343300, 3.244746686838853000, -12.77886437928318800 ) ) ; +#3617 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, 1.082611693429101400E-015, 13.50001676643945100 ) ) ; +#3618 = CARTESIAN_POINT ( 'NONE', ( 1.937151150184172900, -13.08839683911746100, -12.28391665800435100 ) ) ; +#3619 = EDGE_LOOP ( 'NONE', ( #3681, #3694 ) ) ; +#3620 = CARTESIAN_POINT ( 'NONE', ( 12.32145666205297400, -11.47221414399201400, -6.111092195732251000 ) ) ; +#3621 = CARTESIAN_POINT ( 'NONE', ( -4.999999999999999100, 9.999997531949972500, -14.99998323356054700 ) ) ; +#3622 = VERTEX_POINT ( 'NONE', #872 ) ; +#3623 = EDGE_CURVE ( 'NONE', #3299, #4640, #1497, .T. ) ; +#3624 = EDGE_LOOP ( 'NONE', ( #4185, #359, #2099, #2643, #3483, #4409, #3970 ) ) ; +#3625 = EDGE_LOOP ( 'NONE', ( #1998, #2001, #2031, #2049 ) ) ; +#3626 = ORIENTED_EDGE ( 'NONE', *, *, #270, .T. ) ; +#3627 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949969000, 15.00001676643945100 ) ) ; +#3628 = VERTEX_POINT ( 'NONE', #3794 ) ; +#3629 = EDGE_CURVE ( 'NONE', #100, #251, #4596, .T. ) ; +#3630 = CARTESIAN_POINT ( 'NONE', ( -0.1572613360408878200, -11.64089115292008400, 7.568579244096814500 ) ) ; +#3631 = EDGE_LOOP ( 'NONE', ( #3740, #3167, #4386, #3784, #3215, #3838 ) ) ; +#3632 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3633 = ORIENTED_EDGE ( 'NONE', *, *, #981, .T. ) ; +#3634 = ORIENTED_EDGE ( 'NONE', *, *, #1462, .T. ) ; +#3635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3636 = EDGE_LOOP ( 'NONE', ( #1586, #942, #2430, #2256 ) ) ; +#3637 = ORIENTED_EDGE ( 'NONE', *, *, #1449, .F. ) ; +#3638 = AXIS2_PLACEMENT_3D ( 'NONE', #4364, #2255, #4693 ) ; +#3639 = CARTESIAN_POINT ( 'NONE', ( 15.50606520766959000, -11.60417894547992100, -4.470998433297923600 ) ) ; +#3640 = CARTESIAN_POINT ( 'NONE', ( 1.029222098083726800, -9.011839455785384700, -13.03962739685104900 ) ) ; +#3641 = ORIENTED_EDGE ( 'NONE', *, *, #402, .F. ) ; +#3642 = ORIENTED_EDGE ( 'NONE', *, *, #4363, .F. ) ; +#3643 = CARTESIAN_POINT ( 'NONE', ( 9.776849471579547300, 20.43466303776799400, 70.00001676643944400 ) ) ; +#3644 = AXIS2_PLACEMENT_3D ( 'NONE', #2937, #704, #3303 ) ; +#3645 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -4.669957029759402200, -15.18191720718618700 ) ) ; +#3646 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000068400, 2.827250477872783800, 12.50001676643944900 ) ) ; +#3647 = VERTEX_POINT ( 'NONE', #4152 ) ; +#3648 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 7.597114959037287300, -9.999983233560547200 ) ) ; +#3649 = ORIENTED_EDGE ( 'NONE', *, *, #675, .T. ) ; +#3650 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#3651 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949972100, -15.44080068533170500 ) ) ; +#3652 = EDGE_CURVE ( 'NONE', #1149, #491, #585, .T. ) ; +#3653 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3654 = CARTESIAN_POINT ( 'NONE', ( 15.35658998073772400, 4.407143856427669700, 12.14342678570244700 ) ) ; +#3655 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3656 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999800, 7.499997531949968100, 7.500016766439452800 ) ) ; +#3657 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #1421, #1760 ) ; +#3658 = CARTESIAN_POINT ( 'NONE', ( 12.45750706691924700, 6.860165695315758100, -10.28340578832309400 ) ) ; +#3659 = AXIS2_PLACEMENT_3D ( 'NONE', #3924, #1817, #4267 ) ; +#3660 = VECTOR ( 'NONE', #2512, 1000.000000000000000 ) ; +#3661 = ORIENTED_EDGE ( 'NONE', *, *, #4307, .T. ) ; +#3662 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#3663 = CARTESIAN_POINT ( 'NONE', ( -0.2284811990704757600, 4.235484539469908300, -15.13478750123694600 ) ) ; +#3664 = CYLINDRICAL_SURFACE ( 'NONE', #241, 5.000000000000000000 ) ; +#3665 = EDGE_LOOP ( 'NONE', ( #4085, #4089, #4110, #4115 ) ) ; +#3666 = AXIS2_PLACEMENT_3D ( 'NONE', #2075, #3492, #1412 ) ; +#3667 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.301042606982606500E-015, 0.0000000000000000000 ) ) ; +#3668 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3669 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000200, -7.894689558584413000, 15.32249805435734700 ) ) ; +#3670 = CARTESIAN_POINT ( 'NONE', ( 16.92726639869678400, 6.498331742512228000, 11.18729708800381100 ) ) ; +#3671 = ORIENTED_EDGE ( 'NONE', *, *, #1471, .T. ) ; +#3672 = CARTESIAN_POINT ( 'NONE', ( -8.749496255471187200E-014, 23.83988570249743700, 68.16191830911692800 ) ) ; +#3673 = CARTESIAN_POINT ( 'NONE', ( 15.01458520311840400, 2.915895802111585500, -13.82965986413104500 ) ) ; +#3674 = EDGE_LOOP ( 'NONE', ( #4057, #4168, #4218, #4265 ) ) ; +#3675 = CARTESIAN_POINT ( 'NONE', ( 11.39939088658951700, 20.76255700216586000, 69.81689885874273200 ) ) ; +#3676 = ORIENTED_EDGE ( 'NONE', *, *, #402, .T. ) ; +#3677 = ORIENTED_EDGE ( 'NONE', *, *, #3424, .T. ) ; +#3678 = CARTESIAN_POINT ( 'NONE', ( -0.006293132594061464800, 2.750779753055784000, -13.86459716126755200 ) ) ; +#3679 = ORIENTED_EDGE ( 'NONE', *, *, #2104, .T. ) ; +#3680 = ORIENTED_EDGE ( 'NONE', *, *, #874, .F. ) ; +#3681 = ORIENTED_EDGE ( 'NONE', *, *, #3510, .T. ) ; +#3682 = ORIENTED_EDGE ( 'NONE', *, *, #1491, .T. ) ; +#3683 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 22.41388768475544400, 65.22803069515872200 ) ) ; +#3684 = ORIENTED_EDGE ( 'NONE', *, *, #1104, .F. ) ; +#3685 = CARTESIAN_POINT ( 'NONE', ( 40.19174207655505900, 12.49999753194997400, 17.32839577564256600 ) ) ; +#3686 = VERTEX_POINT ( 'NONE', #3095 ) ; +#3687 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2209, #4647, #2552, #246, #2902, #659, #3267, #1076, #3618, #1493 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 8.673617379884035500E-019, 0.0009478689599261298300, 0.001895737919852258800, 0.002843606879778387600, 0.003791475839704516700 ), + .UNSPECIFIED. ) ; +#3688 = AXIS2_PLACEMENT_3D ( 'NONE', #2494, #170, #2845 ) ; +#3689 = CARTESIAN_POINT ( 'NONE', ( 2.686067656459464500, 22.03137778789752600, 69.70509246577219600 ) ) ; +#3690 = PLANE ( 'NONE', #3061 ) ; +#3691 = ORIENTED_EDGE ( 'NONE', *, *, #545, .F. ) ; +#3692 = EDGE_LOOP ( 'NONE', ( #751, #4614 ) ) ; +#3693 = CARTESIAN_POINT ( 'NONE', ( 12.31393234354493200, 22.03137778789806600, 69.70509246577017800 ) ) ; +#3694 = ORIENTED_EDGE ( 'NONE', *, *, #1653, .T. ) ; +#3695 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3696 = CIRCLE ( 'NONE', #1115, 3.189999999999994200 ) ; +#3697 = ORIENTED_EDGE ( 'NONE', *, *, #2703, .F. ) ; +#3698 = LINE ( 'NONE', #840, #3987 ) ; +#3699 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 22.04611943750566300, 65.14638141441625400 ) ) ; +#3700 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 20.93026349232824400, 65.00001677046101600 ) ) ; +#3701 = CARTESIAN_POINT ( 'NONE', ( -0.08856236454263954900, 3.574254793848475700, -12.74607824388945200 ) ) ; +#3702 = CARTESIAN_POINT ( 'NONE', ( 12.17532467532467400, -10.69511892927339900, 20.00001676643945100 ) ) ; +#3703 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000027200, 20.87127743629227800, 68.88423750971907100 ) ) ; +#3704 = CARTESIAN_POINT ( 'NONE', ( 15.00629313259406100, 2.750779753055789800, -13.86459716126755200 ) ) ; +#3705 = CARTESIAN_POINT ( 'NONE', ( 11.68671537667082000, 22.05884157155509900, 69.17793745548650000 ) ) ; +#3706 = EDGE_CURVE ( 'NONE', #1071, #4662, #1806, .T. ) ; +#3707 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3708 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 12.49999753194997600, -4.999983233560542800 ) ) ; +#3709 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2070, #4172, #914, #3487, #1331, #3833, #1740, #4190, #2087, #4541 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 2.512449932618694300E-018, 0.001104912256975912100, 0.002209824513951821600, 0.003314736770927730900, 0.004419649027903640700 ), + .UNSPECIFIED. ) ; +#3710 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 68.99053987906626200 ) ) ; +#3711 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3712 = CARTESIAN_POINT ( 'NONE', ( 1.898399999999998800, 24.99999753194998300, 68.99053987906626200 ) ) ; +#3713 = VERTEX_POINT ( 'NONE', #2747 ) ; +#3714 = CARTESIAN_POINT ( 'NONE', ( 12.23812772573851100, -11.59255452884597500, -4.705414532640746800 ) ) ; +#3715 = ORIENTED_EDGE ( 'NONE', *, *, #654, .F. ) ; +#3716 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3717 = PLANE ( 'NONE', #1952 ) ; +#3718 = ORIENTED_EDGE ( 'NONE', *, *, #3019, .F. ) ; +#3719 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 8.385741033500860200, -8.999983233560547200 ) ) ; +#3720 = ORIENTED_EDGE ( 'NONE', *, *, #675, .F. ) ; +#3721 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, -114.1317621774297500, -10.17982295743315100 ) ) ; +#3722 = VERTEX_POINT ( 'NONE', #3447 ) ; +#3723 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ; +#3724 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3725 = ORIENTED_EDGE ( 'NONE', *, *, #2647, .T. ) ; +#3726 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#3727 = ORIENTED_EDGE ( 'NONE', *, *, #1316, .F. ) ; +#3728 = CARTESIAN_POINT ( 'NONE', ( 14.59962854338347400, -11.10970119574938200, -12.60254970169709700 ) ) ; +#3729 = ORIENTED_EDGE ( 'NONE', *, *, #1346, .F. ) ; +#3730 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4369, #1543, #290 ), + ( #4698, #2603, #316 ), + ( #2958, #727, #3327 ), + ( #1145, #3672, #1558 ), + ( #4034, #1927, #4381 ), + ( #2275, #4714, #2617 ), + ( #328, #2974, #744 ), + ( #3335, #1162, #3689 ), + ( #1573, #4045, #1942 ), + ( #4396, #2284, #4725 ), + ( #2637, #343, #2984 ), + ( #764, #3350, #1175 ), + ( #3700, #1590, #4059 ), + ( #1955, #4411, #2298 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.008655643087506718200, 0.009197809853832386200, 0.009739976620158054300, 0.01028214338648372200, 0.01082431015280939000, 0.01190864368546072600, 0.01299297721811206400 ), + ( 0.0000000000000000000, 0.8699444128861393300 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.8885353709407054500, 0.9710068044505294500), + ( 1.000000000000000000, 0.8885736188172930200, 0.9710167531506204200), + ( 1.000000000000000000, 0.8863514041254451100, 0.9704387302777377500), + ( 1.000000000000000000, 0.8784148422655455600, 0.9683743418530284000), + ( 1.000000000000000000, 0.8727308381892995300, 0.9668958688784408100), + ( 1.000000000000000000, 0.8595925041218748200, 0.9634784413767668600), + ( 1.000000000000000000, 0.8521596420027943700, 0.9615450708831001500), + ( 1.000000000000000000, 0.8369141598573823800, 0.9575795506205893000), + ( 1.000000000000000000, 0.8291004336683676100, 0.9555471131264707800), + ( 1.000000000000000000, 0.8062295403281881700, 0.9495981382041196500), + ( 1.000000000000000000, 0.7918414360591467000, 0.9458556315077884000), + ( 1.000000000000000000, 0.7663363832706706600, 0.9392214822782379800), + ( 1.000000000000000000, 0.7551033635913105800, 0.9362996483393164500), + ( 1.000000000000000000, 0.7451991807209996700, 0.9337234597031538500) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3731 = CARTESIAN_POINT ( 'NONE', ( 0.5412584030794106400, -13.04546428050097800, 8.133266740812557000 ) ) ; +#3732 = VERTEX_POINT ( 'NONE', #4523 ) ; +#3733 = CARTESIAN_POINT ( 'NONE', ( 15.00209815106538300, 2.667247084846565500, -13.88227203707857900 ) ) ; +#3734 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000000, 2.499997531949969900, 12.50001676643945100 ) ) ; +#3735 = VERTEX_POINT ( 'NONE', #73 ) ; +#3736 = EDGE_CURVE ( 'NONE', #251, #1812, #4485, .T. ) ; +#3737 = VERTEX_POINT ( 'NONE', #2762 ) ; +#3738 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 3.244746686838853000, -12.77886437928318800 ) ) ; +#3739 = ORIENTED_EDGE ( 'NONE', *, *, #995, .T. ) ; +#3740 = ORIENTED_EDGE ( 'NONE', *, *, #588, .F. ) ; +#3741 = CARTESIAN_POINT ( 'NONE', ( 13.87962558490811000, -13.26091311687121900, 3.831525253842735300 ) ) ; +#3742 = PERSON_AND_ORGANIZATION ( #2110, #4573 ) ; +#3743 = ORIENTED_EDGE ( 'NONE', *, *, #2239, .F. ) ; +#3744 = AXIS2_PLACEMENT_3D ( 'NONE', #4626, #2518, #199 ) ; +#3745 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 43.36823782257022200, 60.10161676643944900 ) ) ; +#3746 = VERTEX_POINT ( 'NONE', #1715 ) ; +#3747 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999994700, -20.19331522417383000, 24.10673685848191600 ) ) ; +#3748 = AXIS2_PLACEMENT_3D ( 'NONE', #1654, #4481, #2372 ) ; +#3749 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -6.631762177429775000, 12.50001676643945100 ) ) ; +#3750 = VERTEX_POINT ( 'NONE', #3107 ) ; +#3751 = VECTOR ( 'NONE', #3169, 1000.000000000000000 ) ; +#3752 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949971700, -13.91766076750309400 ) ) ; +#3753 = CARTESIAN_POINT ( 'NONE', ( 14.06693147497343300, 3.244746686838852600, -12.77886437928318800 ) ) ; +#3754 = CARTESIAN_POINT ( 'NONE', ( 2.920381372588994000E-016, -9.377177677831918200, -16.08832967624562100 ) ) ; +#3755 = CARTESIAN_POINT ( 'NONE', ( 0.003686818699645445900, 2.494636376851048400, -12.90317947190891300 ) ) ; +#3756 = DIRECTION ( 'NONE', ( 0.09547781514618909600, -1.418513102350652300E-016, -0.9954315580766515100 ) ) ; +#3757 = CARTESIAN_POINT ( 'NONE', ( 5.223150528420450900, 20.43466303776799400, 69.50001676643945800 ) ) ; +#3758 = CARTESIAN_POINT ( 'NONE', ( 2.966813014049062900, 6.782213701294384800, -10.41598040461429200 ) ) ; +#3759 = EDGE_CURVE ( 'NONE', #1324, #223, #4327, .T. ) ; +#3760 = CARTESIAN_POINT ( 'NONE', ( 12.50224830341907300, 7.307058100432166200, -9.267465689214027700 ) ) ; +#3761 = CARTESIAN_POINT ( 'NONE', ( 15.66987298107780000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#3762 = FACE_OUTER_BOUND ( 'NONE', #2532, .T. ) ; +#3763 = LINE ( 'NONE', #922, #4684 ) ; +#3764 = ORIENTED_EDGE ( 'NONE', *, *, #474, .F. ) ; +#3765 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3766 = CARTESIAN_POINT ( 'NONE', ( 13.49807550711264200, 7.499997531949971700, -7.838943926839002400 ) ) ; +#3767 = FACE_OUTER_BOUND ( 'NONE', #3082, .T. ) ; +#3768 = CARTESIAN_POINT ( 'NONE', ( 16.30673652164511000, 5.883410208786387800, -12.26655678245357200 ) ) ; +#3769 = ORIENTED_EDGE ( 'NONE', *, *, #1862, .F. ) ; +#3770 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 12.49999753194997400, 1.445602611221717900E-015 ) ) ; +#3771 = CARTESIAN_POINT ( 'NONE', ( 38.65990486868628300, 12.49999753194997300, 15.23669006061806500 ) ) ; +#3772 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -13.17394646130280100, 161.9249932573022800 ) ) ; +#3773 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.902160899098726400, 15.30880721566175300 ) ) ; +#3774 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3775 = EDGE_LOOP ( 'NONE', ( #3288, #3856, #4488, #3902 ) ) ; +#3776 = AXIS2_PLACEMENT_3D ( 'NONE', #3458, #1300, #3809 ) ; +#3777 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 7.499997531949969900, 7.500016766439451900 ) ) ; +#3778 = CARTESIAN_POINT ( 'NONE', ( 2.702003018711200500, 8.010080598728725600, -9.606039018647255300 ) ) ; +#3779 = ORIENTED_EDGE ( 'NONE', *, *, #1011, .T. ) ; +#3780 = CARTESIAN_POINT ( 'NONE', ( 12.73618555437919800, 6.947478891773485500, -10.12040092296349200 ) ) ; +#3781 = ORIENTED_EDGE ( 'NONE', *, *, #4720, .F. ) ; +#3782 = ORIENTED_EDGE ( 'NONE', *, *, #3897, .F. ) ; +#3783 = DIRECTION ( 'NONE', ( -9.912705577010325500E-017, -1.136379553610627100E-048, -1.000000000000000000 ) ) ; +#3784 = ORIENTED_EDGE ( 'NONE', *, *, #732, .F. ) ; +#3785 = CARTESIAN_POINT ( 'NONE', ( 2.691943829776725700, 8.016116594637548300, -9.601651960314075800 ) ) ; +#3786 = ORIENTED_EDGE ( 'NONE', *, *, #2385, .T. ) ; +#3787 = CARTESIAN_POINT ( 'NONE', ( 18.68525951120396700, 7.366759779046329700, -9.149381097219615500 ) ) ; +#3788 = EDGE_LOOP ( 'NONE', ( #1388, #1404, #1454, #1466 ) ) ; +#3789 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3790 = CARTESIAN_POINT ( 'NONE', ( -2.071067811865475500, 7.499997531949969000, 11.01473539220088000 ) ) ; +#3791 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#3792 = CARTESIAN_POINT ( 'NONE', ( 13.09533914867942900, 24.27357487202633700, 69.63147614422433700 ) ) ; +#3793 = ORIENTED_EDGE ( 'NONE', *, *, #2590, .F. ) ; +#3794 = CARTESIAN_POINT ( 'NONE', ( 13.06766588139503700, -10.73463500113415100, -9.914337676050291000 ) ) ; +#3795 = ORIENTED_EDGE ( 'NONE', *, *, #1898, .T. ) ; +#3796 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1151, #1904, #2009, #4467, #2352, #15 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 4 ), + ( 0.0000000000000000000, 0.005420319538344093100, 0.01084063907668818600 ), + .UNSPECIFIED. ) ; +#3797 = CARTESIAN_POINT ( 'NONE', ( -0.03102220184093551500, 3.080410212718121900, -13.79741396621859200 ) ) ; +#3798 = ORIENTED_EDGE ( 'NONE', *, *, #1020, .T. ) ; +#3799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3800 = CARTESIAN_POINT ( 'NONE', ( 2.474875054940960200, 7.386742496798716800, -8.896879809343602100 ) ) ; +#3801 = VERTEX_POINT ( 'NONE', #3896 ) ; +#3802 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 7.597114959037286400, -9.999983233560547200 ) ) ; +#3803 = ORIENTED_EDGE ( 'NONE', *, *, #1037, .F. ) ; +#3804 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2478, #958, #987 ), + ( #3546, #1411, #3905 ), + ( #1801, #4253, #2153 ), + ( #4600, #2492, #169 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001072180819809296500 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.6957923987089018600, 1.000000000000000000), + ( 1.000000000000000000, 0.6806137855510995300, 1.000000000000000000), + ( 1.000000000000000000, 0.6624054580141201000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3805 = EDGE_CURVE ( 'NONE', #1092, #3737, #4264, .T. ) ; +#3806 = CARTESIAN_POINT ( 'NONE', ( 1.863529853018407500, -10.65557327688656700, -10.20145185049136000 ) ) ; +#3807 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3808 = VERTEX_POINT ( 'NONE', #490 ) ; +#3809 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3810 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #4666, #2945, ( #4279 ) ) ; +#3811 = LINE ( 'NONE', #2668, #1945 ) ; +#3812 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 12.49999753194997600, -14.99998323356054700 ) ) ; +#3813 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -11.44630387609749900, 65.00001676643944400 ) ) ; +#3814 = AXIS2_PLACEMENT_3D ( 'NONE', #4038, #1935, #3027 ) ; +#3815 = EDGE_LOOP ( 'NONE', ( #1122, #1143, #1152, #1191, #1197, #1221, #1253, #1280 ) ) ; +#3816 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669294400, 0.9848077530122082400 ) ) ; +#3817 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3818 = VECTOR ( 'NONE', #822, 1000.000000000000000 ) ; +#3819 = CARTESIAN_POINT ( 'NONE', ( 2.746591928819426700, -11.63176217742977200, -3.844556172646296200 ) ) ; +#3820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3821 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949969900, 12.50001676643945100 ) ) ; +#3822 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999983300, 2.499997531949969000, 12.50001676643944900 ) ) ; +#3823 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 8.385741033500860200, -8.999983233560547200 ) ) ; +#3824 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2899, #883, #1297 ), + ( #3806, #1706, #4160 ), + ( #2062, #4513, #2399 ), + ( #63, #2754, #475 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0009516347729866835900 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4366246731659508300, 1.000000000000000000), + ( 1.000000000000000000, 0.4491345989222296800, 1.000000000000000000), + ( 1.000000000000000000, 0.4618106313496537200, 1.000000000000000000), + ( 1.000000000000000000, 0.4745880129960256000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3825 = CARTESIAN_POINT ( 'NONE', ( 2.308863706284090400, -11.63176217742977400, 0.3161225867703576500 ) ) ; +#3826 = CARTESIAN_POINT ( 'NONE', ( -0.006293132594061478700, 2.750779753055784500, -13.86459716126755200 ) ) ; +#3827 = CARTESIAN_POINT ( 'NONE', ( 0.9924482408871263500, 2.800936197276946400, -13.86459716126755200 ) ) ; +#3828 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -8.561776163818310100, -13.38134266248358300 ) ) ; +#3829 = CARTESIAN_POINT ( 'NONE', ( 3.102827606657498000, 22.38426604366545500, 69.13535368849859700 ) ) ; +#3830 = CARTESIAN_POINT ( 'NONE', ( -0.06015552032929187600, -10.54279053991320400, -10.64648774623391100 ) ) ; +#3831 = EDGE_CURVE ( 'NONE', #4748, #4451, #4383, .T. ) ; +#3832 = FACE_OUTER_BOUND ( 'NONE', #2903, .T. ) ; +#3833 = CARTESIAN_POINT ( 'NONE', ( 0.2191110111458612600, -10.61921945993584300, -13.12770124321173300 ) ) ; +#3834 = ORIENTED_EDGE ( 'NONE', *, *, #826, .F. ) ; +#3835 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3836 = AXIS2_PLACEMENT_3D ( 'NONE', #1279, #2023, #3783 ) ; +#3837 = CARTESIAN_POINT ( 'NONE', ( -0.5058351973303069100, 4.715753562568752800, 12.89301452964323100 ) ) ; +#3838 = ORIENTED_EDGE ( 'NONE', *, *, #839, .F. ) ; +#3839 = PLANE ( 'NONE', #3247 ) ; +#3840 = ORIENTED_EDGE ( 'NONE', *, *, #1435, .T. ) ; +#3841 = CARTESIAN_POINT ( 'NONE', ( 73.21443512576246300, -20.19331522417383000, 24.10673685848191600 ) ) ; +#3842 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 12.49999753194997600, -8.999983233560549000 ) ) ; +#3843 = ORIENTED_EDGE ( 'NONE', *, *, #1037, .T. ) ; +#3844 = ADVANCED_FACE ( 'NONE', ( #4053 ), #571, .T. ) ; +#3845 = AXIS2_PLACEMENT_3D ( 'NONE', #534, #1348, #3150 ) ; +#3846 = ORIENTED_EDGE ( 'NONE', *, *, #1449, .T. ) ; +#3847 = CARTESIAN_POINT ( 'NONE', ( 0.2334663704197962900, -10.66427578386851500, -13.08424596020687000 ) ) ; +#3848 = ORIENTED_EDGE ( 'NONE', *, *, #858, .T. ) ; +#3849 = CARTESIAN_POINT ( 'NONE', ( 13.26972189700091500, -10.48186707534378600, -10.77203695102143200 ) ) ; +#3850 = ORIENTED_EDGE ( 'NONE', *, *, #1047, .T. ) ; +#3851 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, 7.499997531949968100, 6.500016766439454600 ) ) ; +#3852 = EDGE_LOOP ( 'NONE', ( #3671, #3682, #3715, #3727, #3764, #3781, #3834, #3840 ) ) ; +#3853 = ORIENTED_EDGE ( 'NONE', *, *, #4276, .T. ) ; +#3854 = CARTESIAN_POINT ( 'NONE', ( -1.662360465106106800, 6.292552620607799500, 10.83765630133194700 ) ) ; +#3855 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .F. ) ; +#3856 = ORIENTED_EDGE ( 'NONE', *, *, #4620, .T. ) ; +#3857 = EDGE_LOOP ( 'NONE', ( #2461, #2477 ) ) ; +#3858 = CARTESIAN_POINT ( 'NONE', ( 1.634102810359419300, -13.37103213556392600, 0.2523429020242680700 ) ) ; +#3859 = ORIENTED_EDGE ( 'NONE', *, *, #954, .F. ) ; +#3860 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#3861 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3862 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999800, -9.623105479143962500, -15.97912137557902500 ) ) ; +#3863 = ORIENTED_EDGE ( 'NONE', *, *, #3243, .T. ) ; +#3864 = EDGE_CURVE ( 'NONE', #880, #1946, #1165, .T. ) ; +#3865 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3866 = CARTESIAN_POINT ( 'NONE', ( 2.112496518062822100, -13.44627106073971500, -3.332597199330517700 ) ) ; +#3867 = LOCAL_TIME ( 15, 8, 41.00000000000000000, #4764 ) ; +#3868 = EDGE_LOOP ( 'NONE', ( #361, #403, #472, #484 ) ) ; +#3869 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #76, #2408, #912, #3484, #1326, #3829, #1738, #4187, #2085, #4538 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001176669913309267400, 0.002353339826618534800, 0.003530009739927801900, 0.004706679653237069500 ), + .UNSPECIFIED. ) ; +#3870 = CARTESIAN_POINT ( 'NONE', ( 13.06766588139506900, -10.73463500113415500, -9.914337676050283900 ) ) ; +#3871 = CYLINDRICAL_SURFACE ( 'NONE', #2146, 7.500000000000000000 ) ; +#3872 = EDGE_LOOP ( 'NONE', ( #2353, #3245, #4561, #49, #56, #89, #111, #117 ) ) ; +#3873 = EDGE_CURVE ( 'NONE', #1133, #4551, #3949, .T. ) ; +#3874 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000010700, 7.499997531949969000, 7.500016766439443900 ) ) ; +#3875 = VERTEX_POINT ( 'NONE', #2884 ) ; +#3876 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3877 = FACE_OUTER_BOUND ( 'NONE', #611, .T. ) ; +#3878 = AXIS2_PLACEMENT_3D ( 'NONE', #1130, #3662, #1549 ) ; +#3879 = CARTESIAN_POINT ( 'NONE', ( 3.993208718695501400, 20.55293979002667700, 69.89760508273241200 ) ) ; +#3880 = CARTESIAN_POINT ( 'NONE', ( 2.824675324675325300, -10.69511892927339900, 60.10161676643944900 ) ) ; +#3881 = CARTESIAN_POINT ( 'NONE', ( 2.747116250152333600, -11.55540508281037900, -5.249793469221772000 ) ) ; +#3882 = CARTESIAN_POINT ( 'NONE', ( 12.89946992079861600, -13.28020063773898400, -6.298855534413758200 ) ) ; +#3883 = ADVANCED_FACE ( 'NONE', ( #3832 ), #3664, .F. ) ; +#3884 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.082611693429101400E-015, 13.50001676643945100 ) ) ; +#3885 = CARTESIAN_POINT ( 'NONE', ( -0.01457767834036222600, 2.915745964792083800, -13.82969156842629800 ) ) ; +#3886 = CARTESIAN_POINT ( 'NONE', ( 1.730278102999083200, -10.48186707534378600, -10.77203695102143200 ) ) ; +#3887 = ORIENTED_EDGE ( 'NONE', *, *, #588, .T. ) ; +#3888 = CARTESIAN_POINT ( 'NONE', ( 1.480445455153279700, -12.69297846446348300, -9.090964124443997800 ) ) ; +#3889 = CARTESIAN_POINT ( 'NONE', ( 13.17449658740248400, 23.22954813102271700, 69.41574576131891700 ) ) ; +#3890 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3036, #828, #3753 ), + ( #1656, #4111, #2010 ), + ( #4468, #2354, #18 ), + ( #2708, #428, #3055 ), + ( #845, #3429, #1260 ), + ( #3768, #1674, #4131 ), + ( #2026, #4482, #2373 ), + ( #34, #2723, #446 ), + ( #3075, #865, #3442 ), + ( #1283, #3787, #1690 ), + ( #4148, #2048, #4499 ), + ( #2390, #55, #2742 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 6.432691478724158300, 6.788014017536738700, 6.965675286943029400, 7.143336556349320100, 7.498659095161901400, 7.853981633974482800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7149077045844127700, 1.000000000000000000), + ( 1.000000000000000000, 0.7269585849861557300, 1.000000000000000000), + ( 1.000000000000000000, 0.7535529314966096200, 1.000000000000000000), + ( 1.000000000000000000, 0.8014277510879988000, 1.000000000000000000), + ( 1.000000000000000000, 0.8186718862882308400, 1.000000000000000000), + ( 1.000000000000000000, 0.8533429565517131100, 1.000000000000000000), + ( 1.000000000000000000, 0.8707639227583103800, 1.000000000000000000), + ( 1.000000000000000000, 0.9202642424759754900, 1.000000000000000000), + ( 1.000000000000000000, 0.9493427153763759300, 1.000000000000000000), + ( 1.000000000000000000, 0.9891982913737883400, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3891 = CARTESIAN_POINT ( 'NONE', ( 10.07099389278854300, 20.58136040919855200, 69.50001676643945800 ) ) ; +#3892 = VECTOR ( 'NONE', #2548, 1000.000000000000000 ) ; +#3893 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -5.273559366969493600E-015, -1.000000000000000000 ) ) ; +#3894 = ORIENTED_EDGE ( 'NONE', *, *, #1496, .T. ) ; +#3895 = CARTESIAN_POINT ( 'NONE', ( -0.2754547327550172500, -11.40314939911097600, -6.714598452653391700 ) ) ; +#3896 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 6.747595387856067700, -10.47242612937174200 ) ) ; +#3897 = EDGE_CURVE ( 'NONE', #4001, #108, #4000, .T. ) ; +#3898 = ORIENTED_EDGE ( 'NONE', *, *, #4213, .T. ) ; +#3899 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .T. ) ; +#3900 = CARTESIAN_POINT ( 'NONE', ( -0.4419762109797690200, 5.808642352861676600, -13.30426915525199400 ) ) ; +#3901 = CARTESIAN_POINT ( 'NONE', ( 15.17176024701292100, -11.63176217742978100, 7.335571684581780400 ) ) ; +#3902 = ORIENTED_EDGE ( 'NONE', *, *, #1167, .T. ) ; +#3903 = AXIS2_PLACEMENT_3D ( 'NONE', #2598, #302, #2947 ) ; +#3904 = ORIENTED_EDGE ( 'NONE', *, *, #1088, .T. ) ; +#3905 = CARTESIAN_POINT ( 'NONE', ( 4.641786575182854900, 20.14800680568028200, 70.00001676643945800 ) ) ; +#3906 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#3907 = CARTESIAN_POINT ( 'NONE', ( 11.56338761836505400, 21.90913794668198400, 69.20333439561021300 ) ) ; +#3908 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 20.00001676643945100 ) ) ; +#3909 = ORIENTED_EDGE ( 'NONE', *, *, #128, .F. ) ; +#3910 = VERTEX_POINT ( 'NONE', #653 ) ; +#3911 = AXIS2_PLACEMENT_3D ( 'NONE', #377, #362, #3009 ) ; +#3912 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#3913 = VERTEX_POINT ( 'NONE', #1487 ) ; +#3914 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3287, #268, #1103 ), + ( #3646, #1517, #3997 ), + ( #1897, #4352, #2240 ), + ( #4681, #2588, #288 ), + ( #2939, #707, #3306 ), + ( #1117, #3654, #1541 ), + ( #4014, #1912, #4367 ), + ( #2258, #4695, #2602 ), + ( #311, #2956, #725 ), + ( #3326, #1142, #3670 ), + ( #1555, #4032, #1925 ), + ( #4380, #2273, #4713 ), + ( #2616, #327, #2971 ), + ( #741, #3334, #1161 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 6.283185307179586200, 6.479534848028948500, 6.675884388878310800, 6.872233929727672200, 7.068583470577034500, 7.461282552275758200, 7.853981633974482800 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865469100, 1.000000000000000000), + ( 1.000000000000000000, 0.7070717282144595200, 1.000000000000000000), + ( 1.000000000000000000, 0.7117460027460370500, 1.000000000000000000), + ( 1.000000000000000000, 0.7291288937972780800, 1.000000000000000000), + ( 1.000000000000000000, 0.7418334181782935100, 1.000000000000000000), + ( 1.000000000000000000, 0.7723968215189088700, 1.000000000000000000), + ( 1.000000000000000000, 0.7902180089061903200, 1.000000000000000000), + ( 1.000000000000000000, 0.8275942693371504100, 1.000000000000000000), + ( 1.000000000000000000, 0.8471316606208667600, 1.000000000000000000), + ( 1.000000000000000000, 0.9038128901115798400, 1.000000000000000000), + ( 1.000000000000000000, 0.9386556510583006200, 1.000000000000000000), + ( 1.000000000000000000, 0.9867291887040119400, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3915 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 15.00001676643945100 ) ) ; +#3916 = EDGE_LOOP ( 'NONE', ( #1770, #1822, #1895 ) ) ; +#3917 = VERTEX_POINT ( 'NONE', #3260 ) ; +#3918 = ADVANCED_FACE ( 'NONE', ( #4049 ), #3973, .F. ) ; +#3919 = ORIENTED_EDGE ( 'NONE', *, *, #637, .T. ) ; +#3920 = CARTESIAN_POINT ( 'NONE', ( 14.66098486585553200, -12.76854010933698900, 9.081517125990373500 ) ) ; +#3921 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3532, #2176, #4625 ), + ( #2516, #198, #2875 ), + ( #619, #3226, #1036 ), + ( #3588, #1452, #3946 ), + ( #1847, #4295, #2185 ), + ( #4634, #2534, #217 ), + ( #2885, #642, #3244 ), + ( #2586, #283, #2935 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( -3.469446951953614200E-018, 0.005420330321281810300, 0.008130495481922716700, 0.01084066064256362400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.5071401350274404900, 1.000000000000000000), + ( 1.000000000000000000, 0.4689970808100659700, 1.000000000000000000), + ( 1.000000000000000000, 0.4317236749946853400, 1.000000000000000000), + ( 1.000000000000000000, 0.3797816146567548600, 1.000000000000000000), + ( 1.000000000000000000, 0.3631369246819589600, 1.000000000000000000), + ( 1.000000000000000000, 0.3319650520956601300, 1.000000000000000000), + ( 1.000000000000000000, 0.3174420085189639300, 1.000000000000000000), + ( 1.000000000000000000, 0.3045415543813843100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3922 = ORIENTED_EDGE ( 'NONE', *, *, #1099, .F. ) ; +#3923 = PLANE ( 'NONE', #2311 ) ; +#3924 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.711846095760980000, -9.273070689112936200 ) ) ; +#3925 = CARTESIAN_POINT ( 'NONE', ( 15.05500376510335800, -9.101460165708191500, -12.96380280833155600 ) ) ; +#3926 = ORIENTED_EDGE ( 'NONE', *, *, #981, .F. ) ; +#3927 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3849, #2445, #113 ), + ( #2793, #531, #3149 ), + ( #948, #3511, #1363 ), + ( #3870, #1764, #4215 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0009516347729866799000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4745880129960259900, 1.000000000000000000), + ( 1.000000000000000000, 0.4618106313496500600, 1.000000000000000000), + ( 1.000000000000000000, 0.4491345989222317300, 1.000000000000000000), + ( 1.000000000000000000, 0.4366246731659510500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#3928 = AXIS2_PLACEMENT_3D ( 'NONE', #4577, #1793, #4241 ) ; +#3929 = CARTESIAN_POINT ( 'NONE', ( 11.25803989408395400, -13.98130400311204400, -11.43854127789422400 ) ) ; +#3930 = CARTESIAN_POINT ( 'NONE', ( 4.929006107211455000, 20.58136040919855200, 69.50001676643945800 ) ) ; +#3931 = CARTESIAN_POINT ( 'NONE', ( 2.412216775476773800, 22.01963867051589600, 69.54950734774675400 ) ) ; +#3932 = EDGE_LOOP ( 'NONE', ( #3355, #3376, #3406, #3423 ) ) ; +#3933 = CARTESIAN_POINT ( 'NONE', ( -2.187241816860383100, 6.676012049735134300, -11.20995042819547500 ) ) ; +#3934 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#3935 = TOROIDAL_SURFACE ( 'NONE', #1910, 32.50000000000000000, 2.500000000000000000 ) ; +#3936 = AXIS2_PLACEMENT_3D ( 'NONE', #811, #3397, #1228 ) ; +#3937 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000002300, -10.55229541076280100, 10.60314730934791200 ) ) ; +#3938 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#3939 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.559374635020935700E-016, 1.000000000000000000 ) ) ; +#3940 = CARTESIAN_POINT ( 'NONE', ( 1.607485710997291100, 24.10839498098565400, 69.36536137158390100 ) ) ; +#3941 = CARTESIAN_POINT ( 'NONE', ( 14.47718968133220600, -11.36746995979289600, -12.26919759828693800 ) ) ; +#3942 = ADVANCED_FACE ( 'NONE', ( #3500 ), #2913, .F. ) ; +#3943 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#3944 = CARTESIAN_POINT ( 'NONE', ( 12.31000278554974700, -11.63176217742977200, -3.277205641478955700 ) ) ; +#3945 = CARTESIAN_POINT ( 'NONE', ( 2.398399999999997900, 24.99999753195000100, 68.99053987906668800 ) ) ; +#3946 = CARTESIAN_POINT ( 'NONE', ( 1.507638507075969700, -13.34389357826563900, 1.133476588023795400 ) ) ; +#3947 = ORIENTED_EDGE ( 'NONE', *, *, #3144, .T. ) ; +#3948 = CARTESIAN_POINT ( 'NONE', ( 2.540916847434600000, 6.860450794072240100, -10.28292124752056900 ) ) ; +#3949 = LINE ( 'NONE', #3195, #4270 ) ; +#3950 = CARTESIAN_POINT ( 'NONE', ( -24.10245034016499600, 12.49999753194997300, 15.48228282264752800 ) ) ; +#3951 = ORIENTED_EDGE ( 'NONE', *, *, #4667, .T. ) ; +#3952 = VERTEX_POINT ( 'NONE', #3627 ) ; +#3953 = CARTESIAN_POINT ( 'NONE', ( 15.01457767834036300, 2.915745964792083400, -13.82969156842629800 ) ) ; +#3954 = ORIENTED_EDGE ( 'NONE', *, *, #1420, .F. ) ; +#3955 = EDGE_CURVE ( 'NONE', #2467, #2426, #3555, .T. ) ; +#3956 = EDGE_LOOP ( 'NONE', ( #3961, #3967, #3981, #4008 ) ) ; +#3957 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -5.711846095760980000, -9.273070689112936200 ) ) ; +#3958 = ADVANCED_FACE ( 'NONE', ( #3452 ), #3279, .T. ) ; +#3959 = ORIENTED_EDGE ( 'NONE', *, *, #1673, .F. ) ; +#3960 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999997800, 7.597114959037287300, -9.999983233560549000 ) ) ; +#3961 = ORIENTED_EDGE ( 'NONE', *, *, #1099, .T. ) ; +#3962 = AXIS2_PLACEMENT_3D ( 'NONE', #2541, #224, #2892 ) ; +#3963 = CARTESIAN_POINT ( 'NONE', ( 15.11260573536934800, -11.12673752132438100, -8.328877641591640600 ) ) ; +#3964 = CARTESIAN_POINT ( 'NONE', ( 1.328446029009855000, -11.53873043039495300, 8.610844368198117500 ) ) ; +#3965 = ORIENTED_EDGE ( 'NONE', *, *, #655, .F. ) ; +#3966 = ORIENTED_EDGE ( 'NONE', *, *, #1666, .T. ) ; +#3967 = ORIENTED_EDGE ( 'NONE', *, *, #1107, .T. ) ; +#3968 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000400, 9.999997531949969000, 15.00001676643945100 ) ) ; +#3969 = ORIENTED_EDGE ( 'NONE', *, *, #3392, .T. ) ; +#3970 = ORIENTED_EDGE ( 'NONE', *, *, #654, .T. ) ; +#3971 = AXIS2_PLACEMENT_3D ( 'NONE', #3710, #4076, #4423 ) ; +#3972 = CARTESIAN_POINT ( 'NONE', ( 15.20962982101465700, -11.63176217742977200, 0.8949348413424046400 ) ) ; +#3973 = PLANE ( 'NONE', #214 ) ; +#3974 = VERTEX_POINT ( 'NONE', #689 ) ; +#3975 = CARTESIAN_POINT ( 'NONE', ( 0.1953834015067930600, -12.46464895972627600, 9.731633542863813000 ) ) ; +#3976 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3977 = EDGE_LOOP ( 'NONE', ( #3863, #3894, #3909, #3947, #3965, #4005 ) ) ; +#3978 = LINE ( 'NONE', #996, #4037 ) ; +#3979 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 12.49999753194997600, -6.199983233560547400 ) ) ; +#3980 = CARTESIAN_POINT ( 'NONE', ( 12.90182082779187500, -13.27961400851496700, -6.256095231758115100 ) ) ; +#3981 = ORIENTED_EDGE ( 'NONE', *, *, #1113, .F. ) ; +#3982 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3983 = ADVANCED_FACE ( 'NONE', ( #3610 ), #3914, .T. ) ; +#3984 = EDGE_LOOP ( 'NONE', ( #3718, #2636, #3125, #4354, #3769 ) ) ; +#3985 = EDGE_CURVE ( 'NONE', #355, #4378, #1783, .T. ) ; +#3986 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -6.631762177429775000, 13.50001676643945100 ) ) ; +#3987 = VECTOR ( 'NONE', #12, 1000.000000000000000 ) ; +#3988 = CARTESIAN_POINT ( 'NONE', ( 1.519723418810247300, -11.63176217742977900, 7.500016766439448400 ) ) ; +#3989 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 24.99999753194998300, 65.73015992574794100 ) ) ; +#3990 = AXIS2_PLACEMENT_3D ( 'NONE', #3351, #4739, #2654 ) ; +#3991 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#3992 = CARTESIAN_POINT ( 'NONE', ( 12.26141018813352100, -11.62690267672964900, -3.846786315646892000 ) ) ; +#3993 = CARTESIAN_POINT ( 'NONE', ( 1.189404596346509200, -9.590050120143102300, -12.44087296679458600 ) ) ; +#3994 = AXIS2_PLACEMENT_3D ( 'NONE', #790, #3382, #1213 ) ; +#3995 = ORIENTED_EDGE ( 'NONE', *, *, #2703, .T. ) ; +#3996 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, 2.326349354283042900, -12.93285301449088300 ) ) ; +#3997 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, 2.827250477872795800, 13.50001676643876900 ) ) ; +#3998 = DIRECTION ( 'NONE', ( -1.156482317317871500E-016, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#3999 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -11.63176217742977600, 7.500016766439451000 ) ) ; +#4000 = LINE ( 'NONE', #235, #3892 ) ; +#4001 = VERTEX_POINT ( 'NONE', #4408 ) ; +#4002 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #127, #2455, #962, #3524, #1376, #3882, #1780, #4226, #2130, #4579, #2728, #2674 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 4 ), + ( 1.069355368659044600E-017, 0.001753980250331030200, 0.003507960500662050100, 0.005261940750993069500, 0.006138930876158578800, 0.007015921001324088900 ), + .UNSPECIFIED. ) ; +#4003 = ADVANCED_FACE ( 'NONE', ( #3767 ), #3099, .F. ) ; +#4004 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#4005 = ORIENTED_EDGE ( 'NONE', *, *, #909, .T. ) ; +#4006 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4007 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.631762177429775000, 7.500016766439451900 ) ) ; +#4008 = ORIENTED_EDGE ( 'NONE', *, *, #3985, .F. ) ; +#4009 = EDGE_CURVE ( 'NONE', #4748, #951, #3213, .T. ) ; +#4010 = ORIENTED_EDGE ( 'NONE', *, *, #3629, .T. ) ; +#4011 = CARTESIAN_POINT ( 'NONE', ( -25.19174207655504500, 12.49999753194996900, 20.00001676643945100 ) ) ; +#4012 = ORIENTED_EDGE ( 'NONE', *, *, #4213, .F. ) ; +#4013 = CARTESIAN_POINT ( 'NONE', ( 1.795862026413769900, -10.57135652397143000, -10.48726299829639400 ) ) ; +#4014 = CARTESIAN_POINT ( 'NONE', ( 14.79301040663040100, 5.005750903667859600, 11.83917476091375100 ) ) ; +#4015 = ORIENTED_EDGE ( 'NONE', *, *, #1720, .T. ) ; +#4016 = AXIS2_PLACEMENT_3D ( 'NONE', #4727, #1163, #4397 ) ; +#4017 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 12.49999753194997300, 7.500016766439453700 ) ) ; +#4018 = ORIENTED_EDGE ( 'NONE', *, *, #1, .T. ) ; +#4019 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.559374635020935700E-016, 1.000000000000000000 ) ) ; +#4020 = ORIENTED_EDGE ( 'NONE', *, *, #4125, .F. ) ; +#4021 = CARTESIAN_POINT ( 'NONE', ( 11.74949837155685200, 6.747595387856068600, -10.47242612937174400 ) ) ; +#4022 = VERTEX_POINT ( 'NONE', #3368 ) ; +#4023 = ORIENTED_EDGE ( 'NONE', *, *, #1626, .T. ) ; +#4024 = ORIENTED_EDGE ( 'NONE', *, *, #1123, .T. ) ; +#4025 = AXIS2_PLACEMENT_3D ( 'NONE', #1956, #4412, #2299 ) ; +#4026 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 8.489810784768483400, -7.485159283662415700 ) ) ; +#4027 = FACE_OUTER_BOUND ( 'NONE', #3323, .T. ) ; +#4028 = EDGE_LOOP ( 'NONE', ( #769, #821, #891, #928 ) ) ; +#4029 = VERTEX_POINT ( 'NONE', #2995 ) ; +#4030 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4031 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -8.305025055459657000, 15.60522810589336900 ) ) ; +#4032 = CARTESIAN_POINT ( 'NONE', ( 17.24365412191987400, 6.742525163698508600, 10.25636264452052700 ) ) ; +#4033 = ORIENTED_EDGE ( 'NONE', *, *, #2447, .F. ) ; +#4034 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.07016741668547200, 65.63474625491652100 ) ) ; +#4035 = CARTESIAN_POINT ( 'NONE', ( 14.99766962663216100, 2.579063988065847500, -12.88829260613511500 ) ) ; +#4036 = VERTEX_POINT ( 'NONE', #779 ) ; +#4037 = VECTOR ( 'NONE', #379, 1000.000000000000000 ) ; +#4038 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -4.999983233560542800 ) ) ; +#4039 = ADVANCED_FACE ( 'NONE', ( #3220 ), #2313, .T. ) ; +#4040 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.281796137159581800, -12.94070894874711200 ) ) ; +#4041 = APPROVAL_DATE_TIME ( #4199, #4728 ) ; +#4042 = EDGE_CURVE ( 'NONE', #3737, #4203, #2991, .T. ) ; +#4043 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 23.50874448439811100, 65.51168925222542300 ) ) ; +#4044 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 9.099997531949975700, -8.189983233560536000 ) ) ; +#4045 = CARTESIAN_POINT ( 'NONE', ( 6.869403668169278900E-014, 22.18499628359028700, 68.39036078273112200 ) ) ; +#4046 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999999600, 12.49999753194997300, 7.500016766439455500 ) ) ; +#4047 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -11.44630387609749900, 65.00001676643944400 ) ) ; +#4048 = AXIS2_PLACEMENT_3D ( 'NONE', #2618, #1913, #3336 ) ; +#4049 = FACE_OUTER_BOUND ( 'NONE', #1261, .T. ) ; +#4050 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 23.15026480919375400, 65.41408628010582000 ) ) ; +#4051 = ORIENTED_EDGE ( 'NONE', *, *, #1488, .F. ) ; +#4052 = DIRECTION ( 'NONE', ( -9.912705577010325500E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4053 = FACE_OUTER_BOUND ( 'NONE', #3665, .T. ) ; +#4054 = ORIENTED_EDGE ( 'NONE', *, *, #2647, .F. ) ; +#4055 = CARTESIAN_POINT ( 'NONE', ( 1.575348587719996600, 7.499997531949971700, -8.003269003328144400 ) ) ; +#4056 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 20.93119888820839900, 65.00001676643944400 ) ) ; +#4057 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ; +#4058 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #833, #451, #3079 ), + ( #870, #3445, #1289 ), + ( #3792, #1696, #4151 ), + ( #2052, #4503, #3393 ), + ( #4385, #2277, #4717 ), + ( #2623, #331, #2977 ), + ( #750, #3341, #1164 ), + ( #3693, #1576, #4050 ), + ( #1947, #4401, #2288 ), + ( #4731, #2642, #349 ), + ( #2988, #770, #3358 ), + ( #1182, #3703, #1598 ), + ( #4064, #1960, #4418 ), + ( #2305, #4744, #2657 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.008655643087506732100, 0.009197809853832401800, 0.009739976620158071600, 0.01028214338648374100, 0.01082431015280941100, 0.01190864368546075100, 0.01299297721811209200 ), + ( 0.1300555871147107100, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 0.9710068044503683500, 0.8885353709408143600, 1.000000000000000000), + ( 0.9710167531504647600, 0.8885736188174222500, 1.000000000000000000), + ( 0.9704387302775667700, 0.8863514041255300400, 1.000000000000000000), + ( 0.9683743418528599800, 0.8784148422656927700, 1.000000000000000000), + ( 0.9668958688782571800, 0.8727308381894249800, 1.000000000000000000), + ( 0.9634784413765642400, 0.8595925041220131600, 1.000000000000000000), + ( 0.9615450708828938700, 0.8521596420029669000, 1.000000000000000000), + ( 0.9575795506203466100, 0.8369141598575149400, 1.000000000000000000), + ( 0.9555471131262309700, 0.8291004336685625600, 1.000000000000000000), + ( 0.9495981382038254400, 0.8062295403283230600, 1.000000000000000000), + ( 0.9458556315074924100, 0.7918414360593688500, 1.000000000000000000), + ( 0.9392214822778954800, 0.7663363832708813800, 1.000000000000000000), + ( 0.9362996483389660600, 0.7551033635915636000, 1.000000000000000000), + ( 0.9337234597027854700, 0.7451991807212485800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4059 = CARTESIAN_POINT ( 'NONE', ( 3.911044701254597500, 20.64855033848774100, 69.88215570082492400 ) ) ; +#4060 = CARTESIAN_POINT ( 'NONE', ( -0.05577622914452909400, 3.244746686838851300, -13.76770913345428400 ) ) ; +#4061 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4062 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ; +#4063 = CARTESIAN_POINT ( 'NONE', ( 0.6496542735128673100, -13.11737994431847900, 7.415429138009334200 ) ) ; +#4064 = CARTESIAN_POINT ( 'NONE', ( 11.08895529875136200, 20.64855033848859700, 69.88215570082368800 ) ) ; +#4065 = ORIENTED_EDGE ( 'NONE', *, *, #1113, .T. ) ; +#4066 = ORIENTED_EDGE ( 'NONE', *, *, #3597, .T. ) ; +#4067 = CARTESIAN_POINT ( 'NONE', ( 14.00755175911287300, 2.627288019610023500, -12.87978940825534300 ) ) ; +#4068 = CARTESIAN_POINT ( 'NONE', ( 12.24378926877955800, 23.08331890407579200, 69.06464488739945300 ) ) ; +#4069 = ORIENTED_EDGE ( 'NONE', *, *, #732, .T. ) ; +#4070 = EDGE_CURVE ( 'NONE', #2322, #2743, #3103, .T. ) ; +#4071 = VERTEX_POINT ( 'NONE', #375 ) ; +#4072 = EDGE_LOOP ( 'NONE', ( #2371, #2406, #2435, #2438 ) ) ; +#4073 = ORIENTED_EDGE ( 'NONE', *, *, #2826, .T. ) ; +#4074 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4075 = EDGE_LOOP ( 'NONE', ( #3333, #4518, #3954, #3362 ) ) ; +#4076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4077 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -1.301042606982606500E-015 ) ) ; +#4078 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4079 = VERTEX_POINT ( 'NONE', #788 ) ; +#4080 = ORIENTED_EDGE ( 'NONE', *, *, #1144, .T. ) ; +#4081 = CARTESIAN_POINT ( 'NONE', ( 12.31537296770520000, -11.47634690416306700, -6.115673308614940000 ) ) ; +#4082 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000200, -9.459455915593421700, -14.02113874912744500 ) ) ; +#4083 = AXIS2_PLACEMENT_3D ( 'NONE', #2638, #344, #2985 ) ; +#4084 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#4085 = ORIENTED_EDGE ( 'NONE', *, *, #1150, .F. ) ; +#4086 = DIRECTION ( 'NONE', ( 9.912705577010325500E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4087 = CARTESIAN_POINT ( 'NONE', ( 4.397918137561991800, 20.94988510403725400, 69.40784625110310900 ) ) ; +#4088 = LINE ( 'NONE', #3356, #2114 ) ; +#4089 = ORIENTED_EDGE ( 'NONE', *, *, #1047, .F. ) ; +#4090 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -11.63176217742977200, -14.39404467726971100 ) ) ; +#4091 = VERTEX_POINT ( 'NONE', #1621 ) ; +#4092 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 5.428929720084492600, 13.50001676643945100 ) ) ; +#4093 = CARTESIAN_POINT ( 'NONE', ( 14.28771468046579000, -11.71311342317935500, -11.72809084459301400 ) ) ; +#4094 = EDGE_CURVE ( 'NONE', #3521, #4696, #2579, .T. ) ; +#4095 = CARTESIAN_POINT ( 'NONE', ( 0.6496542735128673100, -13.11737994431847900, 7.415429138009334200 ) ) ; +#4096 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000008900, 7.499997531949971700, -1.809983233560547900 ) ) ; +#4097 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -5.006327233685850000, -16.76436826747344400 ) ) ; +#4098 = EDGE_CURVE ( 'NONE', #2039, #2474, #2941, .T. ) ; +#4099 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, -15.69321633482545800, 67.63890565532833000 ) ) ; +#4100 = CARTESIAN_POINT ( 'NONE', ( 14.35034572648713100, -13.11737994431847900, 7.415429138009334200 ) ) ; +#4101 = ADVANCED_FACE ( 'NONE', ( #2662 ), #2890, .T. ) ; +#4102 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -4.999983233560542800 ) ) ; +#4103 = EDGE_LOOP ( 'NONE', ( #503, #516, #556, #567 ) ) ; +#4104 = CARTESIAN_POINT ( 'NONE', ( 13.49999999999999600, 7.404783783242378600, -8.805759462705076100 ) ) ; +#4105 = EDGE_LOOP ( 'NONE', ( #683, #1936, #1977, #1984 ) ) ; +#4106 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, 24.99999753194998300, -16.84376276178052500 ) ) ; +#4107 = AXIS2_PLACEMENT_3D ( 'NONE', #3608, #230, #3271 ) ; +#4108 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4109 = ORIENTED_EDGE ( 'NONE', *, *, #2007, .T. ) ; +#4110 = ORIENTED_EDGE ( 'NONE', *, *, #1157, .F. ) ; +#4111 = CARTESIAN_POINT ( 'NONE', ( 15.08856236454085600, 3.574254793848635100, -12.74607824388807300 ) ) ; +#4112 = ORIENTED_EDGE ( 'NONE', *, *, #519, .T. ) ; +#4113 = CARTESIAN_POINT ( 'NONE', ( -9.295536817908791400E-016, 2.583626710175784200, -13.89996547090818700 ) ) ; +#4114 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 19.98722159839779500, 69.50001676643945800 ) ) ; +#4115 = ORIENTED_EDGE ( 'NONE', *, *, #2936, .F. ) ; +#4116 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.337451350268914000E-032, -1.156482317317871500E-016 ) ) ; +#4117 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999997800, 12.49999753194997600, -8.999983233560549000 ) ) ; +#4118 = EDGE_LOOP ( 'NONE', ( #3469, #1930, #1821, #3680 ) ) ; +#4119 = CARTESIAN_POINT ( 'NONE', ( 3.059728702831555800, 7.082702051437173900, -9.908944364928293800 ) ) ; +#4120 = ORIENTED_EDGE ( 'NONE', *, *, #1708, .F. ) ; +#4121 = CARTESIAN_POINT ( 'NONE', ( 12.29797542505724200, 8.010056755256901100, -9.606065995787536900 ) ) ; +#4122 = VERTEX_POINT ( 'NONE', #4099 ) ; +#4123 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -14.13176217742977800, 65.00001676643944400 ) ) ; +#4124 = VERTEX_POINT ( 'NONE', #2 ) ; +#4125 = EDGE_CURVE ( 'NONE', #3390, #2968, #2500, .T. ) ; +#4126 = ORIENTED_EDGE ( 'NONE', *, *, #599, .F. ) ; +#4127 = ORIENTED_EDGE ( 'NONE', *, *, #1157, .T. ) ; +#4128 = LINE ( 'NONE', #1268, #3073 ) ; +#4129 = APPROVAL ( #3650, 'UNSPECIFIED' ) ; +#4130 = ORIENTED_EDGE ( 'NONE', *, *, #2239, .T. ) ; +#4131 = CARTESIAN_POINT ( 'NONE', ( 15.56808382597414400, 5.883410208786675500, -11.52790408678236900 ) ) ; +#4132 = ORIENTED_EDGE ( 'NONE', *, *, #1020, .F. ) ; +#4133 = AXIS2_PLACEMENT_3D ( 'NONE', #710, #3311, #1121 ) ; +#4134 = CARTESIAN_POINT ( 'NONE', ( 38.17514709086907500, 12.49999753194997100, 15.07406330332739600 ) ) ; +#4135 = CARTESIAN_POINT ( 'NONE', ( 3.689999999999995500, 7.499997531949971700, -4.999983233560542800 ) ) ; +#4136 = CARTESIAN_POINT ( 'NONE', ( 1.932334118604960300, -11.69874991408232700, -10.17982295743314600 ) ) ; +#4137 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.281877220041784500, 15.07832499428341500 ) ) ; +#4138 = FACE_OUTER_BOUND ( 'NONE', #3631, .T. ) ; +#4139 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #862, #444, #2721, #1282, #3785, #1688, #4147, #2046, #4497, #2388 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 1.734723475976807100E-018, 0.0004424414433376060600, 0.0008848828866752103900, 0.001327324330012817600, 0.001769765773350424900 ), + .UNSPECIFIED. ) ; +#4140 = ORIENTED_EDGE ( 'NONE', *, *, #1168, .F. ) ; +#4141 = CARTESIAN_POINT ( 'NONE', ( 1.904006038341569800, 7.091733419545934500, -9.815852436774658700 ) ) ; +#4142 = CARTESIAN_POINT ( 'NONE', ( 12.16209422869960500, 7.140004045067710700, -9.773560921520491700 ) ) ; +#4143 = AXIS2_PLACEMENT_3D ( 'NONE', #1062, #2544, #2216 ) ; +#4144 = ORIENTED_EDGE ( 'NONE', *, *, #3174, .F. ) ; +#4145 = CIRCLE ( 'NONE', #1704, 6.000000000000000000 ) ; +#4146 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -6.622779069733811100, 15.00001676643945100 ) ) ; +#4147 = CARTESIAN_POINT ( 'NONE', ( 2.963261350802025800, 7.768601144759801800, -9.854155183982944900 ) ) ; +#4148 = CARTESIAN_POINT ( 'NONE', ( 19.40772408753544600, 7.499997531949972500, -8.545371703383960200 ) ) ; +#4149 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#4150 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4151 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.62740962289441500, 65.71712971710501000 ) ) ; +#4152 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998700, 9.099997531949975700, -2.514807183458664100 ) ) ; +#4153 = DIRECTION ( 'NONE', ( 1.156482317317871500E-016, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#4154 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998700, 7.499997531949971700, -2.514807183458664100 ) ) ; +#4155 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 8.385741033500860200, -8.999983233560549000 ) ) ; +#4156 = AXIS2_PLACEMENT_3D ( 'NONE', #2779, #518, #3134 ) ; +#4157 = ADVANCED_FACE ( 'NONE', ( #2391 ), #3890, .T. ) ; +#4158 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 6.747595387856066800, -10.47242612937174200 ) ) ; +#4159 = VECTOR ( 'NONE', #3550, 1000.000000000000000 ) ; +#4160 = CARTESIAN_POINT ( 'NONE', ( 1.079412257756195500, -12.23771653563016500, -10.47842190402519700 ) ) ; +#4161 = VERTEX_POINT ( 'NONE', #3412 ) ; +#4162 = CARTESIAN_POINT ( 'NONE', ( 11.64939358925025700, 7.607907190177795300, -9.991368932739924000 ) ) ; +#4163 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #4595, #1797, #508, #2772 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 4.762566477949147400 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9997901959002109000, 0.9997901959002109000, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#4164 = PLANE ( 'NONE', #1761 ) ; +#4165 = ORIENTED_EDGE ( 'NONE', *, *, #519, .F. ) ; +#4166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4167 = CARTESIAN_POINT ( 'NONE', ( 0.9798797069924514200, -12.16870957740201800, -13.80473500004500700 ) ) ; +#4168 = ORIENTED_EDGE ( 'NONE', *, *, #1529, .T. ) ; +#4169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4170 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Guard', ( #269, #2707 ), #4450 ) ; +#4171 = CARTESIAN_POINT ( 'NONE', ( 1.730278102999082400, -10.48186707534378400, -10.77203695102143000 ) ) ; +#4172 = CARTESIAN_POINT ( 'NONE', ( 0.8193488772094889000, -11.87921606190105800, -11.40960870729238000 ) ) ; +#4173 = ORIENTED_EDGE ( 'NONE', *, *, #3151, .F. ) ; +#4174 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4175 = ORIENTED_EDGE ( 'NONE', *, *, #1150, .T. ) ; +#4176 = CARTESIAN_POINT ( 'NONE', ( 3.146254542012310300E-012, 2.761574790416400700, 12.50001676644285300 ) ) ; +#4177 = VERTEX_POINT ( 'NONE', #3460 ) ; +#4178 = ORIENTED_EDGE ( 'NONE', *, *, #1673, .T. ) ; +#4179 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4180 = EDGE_LOOP ( 'NONE', ( #3853, #815, #1871, #2911 ) ) ; +#4181 = CARTESIAN_POINT ( 'NONE', ( 1.694566918001438900, -11.63176217742977600, 5.701574881667541600 ) ) ; +#4182 = CARTESIAN_POINT ( 'NONE', ( -0.0007456327319128628700, 2.753360650686824700, -12.85714365836063400 ) ) ; +#4183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.1736481776669290000, 0.9848077530122082400 ) ) ; +#4184 = ORIENTED_EDGE ( 'NONE', *, *, #232, .T. ) ; +#4185 = ORIENTED_EDGE ( 'NONE', *, *, #1420, .T. ) ; +#4186 = ORIENTED_EDGE ( 'NONE', *, *, #995, .F. ) ; +#4187 = CARTESIAN_POINT ( 'NONE', ( 3.811421891533830500, 21.45450425185740800, 69.28052375995679300 ) ) ; +#4188 = CARTESIAN_POINT ( 'NONE', ( 1.579761664288552400, -10.29584993311184400, -11.28810564143813800 ) ) ; +#4189 = EDGE_LOOP ( 'NONE', ( #3028, #3054, #3059, #3067 ) ) ; +#4190 = CARTESIAN_POINT ( 'NONE', ( 0.03243970371023428800, -9.772107820955195500, -13.81632790826858300 ) ) ; +#4191 = EDGE_CURVE ( 'NONE', #4280, #2589, #3045, .T. ) ; +#4192 = ADVANCED_FACE ( 'NONE', ( #2237 ), #4164, .T. ) ; +#4193 = CARTESIAN_POINT ( 'NONE', ( 0.3929977632035976900, 4.715753562568811400, 11.99418156910912000 ) ) ; +#4194 = DATE_AND_TIME ( #4084, #2264 ) ; +#4195 = ORIENTED_EDGE ( 'NONE', *, *, #3759, .T. ) ; +#4196 = CIRCLE ( 'NONE', #1766, 1.000000000000000700 ) ; +#4197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4198 = AXIS2_PLACEMENT_3D ( 'NONE', #1414, #2195, #4639 ) ; +#4199 = DATE_AND_TIME ( #4528, #4531 ) ; +#4200 = ORIENTED_EDGE ( 'NONE', *, *, #1180, .F. ) ; +#4201 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -5.711846095760980000, -9.273070689112936200 ) ) ; +#4202 = CARTESIAN_POINT ( 'NONE', ( -0.06317601596299200800, -9.553526142963122000, -12.49720959044843300 ) ) ; +#4203 = VERTEX_POINT ( 'NONE', #907 ) ; +#4204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4205 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998700, 7.499997531949971700, -2.514807183458664100 ) ) ; +#4206 = CARTESIAN_POINT ( 'NONE', ( -2.481905099655366400, 6.868929474346662000, 10.52173064685216800 ) ) ; +#4207 = CARTESIAN_POINT ( 'NONE', ( 3.993208718695501400, 20.55293979002667700, 69.89760508273241200 ) ) ; +#4208 = CARTESIAN_POINT ( 'NONE', ( 2.112496518062820800, -13.44627106073971100, -3.332597199330517700 ) ) ; +#4209 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 0.0000000000000000000, 65.00001676643944400 ) ) ; +#4210 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949969900, 7.500016766439451900 ) ) ; +#4211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4212 = CARTESIAN_POINT ( 'NONE', ( -0.4544424830379790200, -11.62832106989265000, -3.811719049101684100 ) ) ; +#4213 = EDGE_CURVE ( 'NONE', #3750, #1887, #2280, .T. ) ; +#4214 = VECTOR ( 'NONE', #1400, 1000.000000000000000 ) ; +#4215 = CARTESIAN_POINT ( 'NONE', ( 13.83458235174383700, -12.34049684824547000, -10.17982295743313900 ) ) ; +#4216 = EDGE_LOOP ( 'NONE', ( #3649, #3677 ) ) ; +#4217 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#4218 = ORIENTED_EDGE ( 'NONE', *, *, #3706, .T. ) ; +#4219 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#4220 = ORIENTED_EDGE ( 'NONE', *, *, #3144, .F. ) ; +#4221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#4222 = ORIENTED_EDGE ( 'NONE', *, *, #1237, .T. ) ; +#4223 = AXIS2_PLACEMENT_3D ( 'NONE', #3968, #1861, #4320 ) ; +#4224 = CARTESIAN_POINT ( 'NONE', ( 2.183895312620349700, -13.37772307298179100, -5.368110545987607700 ) ) ; +#4225 = EDGE_LOOP ( 'NONE', ( #896, #935, #956, #963 ) ) ; +#4226 = CARTESIAN_POINT ( 'NONE', ( 12.79775639499422400, -13.41729407708496100, -4.830316994568742800 ) ) ; +#4227 = ORIENTED_EDGE ( 'NONE', *, *, #1088, .F. ) ; +#4228 = ORIENTED_EDGE ( 'NONE', *, *, #4747, .T. ) ; +#4229 = VERTEX_POINT ( 'NONE', #1320 ) ; +#4230 = VERTEX_POINT ( 'NONE', #4533 ) ; +#4231 = CARTESIAN_POINT ( 'NONE', ( 0.4696285468242741300, 5.808642352861674900, -12.39266439744794600 ) ) ; +#4232 = ORIENTED_EDGE ( 'NONE', *, *, #2059, .F. ) ; +#4233 = CARTESIAN_POINT ( 'NONE', ( 1.165417648256180200, -12.34049684824549000, -10.17982295743313700 ) ) ; +#4234 = ORIENTED_EDGE ( 'NONE', *, *, #1168, .T. ) ; +#4235 = CARTESIAN_POINT ( 'NONE', ( 12.27883370118445700, 23.16891958291831700, 70.10491569287501100 ) ) ; +#4236 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4237 = CARTESIAN_POINT ( 'NONE', ( 14.06693147497343300, 3.244746686838853000, -12.77886437928318800 ) ) ; +#4238 = VECTOR ( 'NONE', #4243, 1000.000000000000000 ) ; +#4239 = VERTEX_POINT ( 'NONE', #4519 ) ; +#4240 = EDGE_CURVE ( 'NONE', #1581, #2750, #2133, .T. ) ; +#4241 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.734723475976807300E-016 ) ) ; +#4242 = CARTESIAN_POINT ( 'NONE', ( 2.422958978322859100, -11.23420198366027900, -7.752560558314902700 ) ) ; +#4243 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4244 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -4.843605207426332300, -14.19710945417397800 ) ) ; +#4245 = VERTEX_POINT ( 'NONE', #84 ) ; +#4246 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 69.50001676643945800 ) ) ; +#4247 = CIRCLE ( 'NONE', #950, 1.200000000000004800 ) ; +#4248 = ORIENTED_EDGE ( 'NONE', *, *, #2132, .F. ) ; +#4249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122081300, -0.1736481776669295800 ) ) ; +#4250 = CARTESIAN_POINT ( 'NONE', ( 13.51333404917556700, -11.63176217742977600, 7.783374580580451500 ) ) ; +#4251 = ORIENTED_EDGE ( 'NONE', *, *, #1123, .F. ) ; +#4252 = CARTESIAN_POINT ( 'NONE', ( -0.9631532958344110100, 7.499997531949971700, -7.834640608427718300 ) ) ; +#4253 = CARTESIAN_POINT ( 'NONE', ( 4.594545706350916500, 20.79220156678348300, 69.99964593373063300 ) ) ; +#4254 = VECTOR ( 'NONE', #2013, 1000.000000000000200 ) ; +#4255 = AXIS2_PLACEMENT_3D ( 'NONE', #3188, #2156, #4604 ) ; +#4256 = CARTESIAN_POINT ( 'NONE', ( 12.17959334783890500, 21.50166228798204300, 69.64140472783690000 ) ) ; +#4257 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4258 = ADVANCED_FACE ( 'NONE', ( #2018 ), #1856, .F. ) ; +#4259 = CARTESIAN_POINT ( 'NONE', ( 13.13556638869991700, -13.02755925092396100, -12.41352123935343100 ) ) ; +#4260 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.156482317317871500E-016, 1.000000000000000000 ) ) ; +#4261 = CARTESIAN_POINT ( 'NONE', ( 4.088541935669675300, 21.18684403336127500, 69.33801501409874400 ) ) ; +#4262 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4263 = CARTESIAN_POINT ( 'NONE', ( 15.09313087330010500, -11.34476347181946400, 9.207066555402818200 ) ) ; +#4264 = LINE ( 'NONE', #4244, #4214 ) ; +#4265 = ORIENTED_EDGE ( 'NONE', *, *, #637, .F. ) ; +#4266 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000900, -5.711846095760980000, -15.27307068911293600 ) ) ; +#4267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4268 = CARTESIAN_POINT ( 'NONE', ( 3.601396935298268400, 20.76213636744038400, 69.81706081033591700 ) ) ; +#4269 = CARTESIAN_POINT ( 'NONE', ( 13.87728011164603900, -9.405578770553244500, -12.65433405779911300 ) ) ; +#4270 = VECTOR ( 'NONE', #1473, 1000.000000000000000 ) ; +#4271 = CARTESIAN_POINT ( 'NONE', ( 10.31925744935413500, -14.13176217742977600, -11.35960056912454000 ) ) ; +#4272 = EDGE_LOOP ( 'NONE', ( #4348, #4362, #4406, #4410 ) ) ; +#4273 = ADVANCED_FACE ( 'NONE', ( #2556 ), #3839, .T. ) ; +#4274 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, -14.13176217742977400, -11.35960056912454300 ) ) ; +#4275 = CARTESIAN_POINT ( 'NONE', ( 2.722366230521491700, 23.16578428442035400, 70.10474998488086800 ) ) ; +#4276 = EDGE_CURVE ( 'NONE', #3713, #2106, #1747, .T. ) ; +#4277 = CARTESIAN_POINT ( 'NONE', ( -1.624690180232625900, 6.676012049735297700, -10.64739879156714200 ) ) ; +#4278 = ORIENTED_EDGE ( 'NONE', *, *, #1385, .F. ) ; +#4279 = SECURITY_CLASSIFICATION ( '', '', #299 ) ; +#4280 = VERTEX_POINT ( 'NONE', #105 ) ; +#4281 = ADVANCED_FACE ( 'NONE', ( #1624 ), #1689, .T. ) ; +#4282 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000002300, -11.33640205742941000, 11.22377341792960300 ) ) ; +#4283 = ORIENTED_EDGE ( 'NONE', *, *, #2323, .T. ) ; +#4284 = ORIENTED_EDGE ( 'NONE', *, *, #1187, .F. ) ; +#4285 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -11.33640205742939100, 11.22377341792961400 ) ) ; +#4286 = CARTESIAN_POINT ( 'NONE', ( 1.553777777777772800, 24.99999753194998300, 69.35280431832386200 ) ) ; +#4287 = CARTESIAN_POINT ( 'NONE', ( 15.04512311142056700, -10.46332920544392800, -10.90879044678089100 ) ) ; +#4288 = VERTEX_POINT ( 'NONE', #1751 ) ; +#4289 = ORIENTED_EDGE ( 'NONE', *, *, #1491, .F. ) ; +#4290 = ORIENTED_EDGE ( 'NONE', *, *, #1720, .F. ) ; +#4291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669296900, -0.9848077530122082400 ) ) ; +#4292 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999800, 12.49999753194997300, 6.500016766439454600 ) ) ; +#4293 = CARTESIAN_POINT ( 'NONE', ( 1.553777777777787900, 24.99999753194998300, 69.35280431832428900 ) ) ; +#4294 = ORIENTED_EDGE ( 'NONE', *, *, #4476, .F. ) ; +#4295 = CARTESIAN_POINT ( 'NONE', ( -0.2361829818231765700, -11.63176217742977600, -0.01220925249426822900 ) ) ; +#4296 = ORIENTED_EDGE ( 'NONE', *, *, #4363, .T. ) ; +#4297 = EDGE_LOOP ( 'NONE', ( #959, #1001, #1061, #1155 ) ) ; +#4298 = PERSON_AND_ORGANIZATION ( #2110, #4573 ) ; +#4299 = CARTESIAN_POINT ( 'NONE', ( 1.950426579982117200, 7.065036022875024600, -9.880713960729496000 ) ) ; +#4300 = ORIENTED_EDGE ( 'NONE', *, *, #441, .F. ) ; +#4301 = CARTESIAN_POINT ( 'NONE', ( -24.49548211188401900, 12.49999753194997100, 15.81108604775639400 ) ) ; +#4302 = VERTEX_POINT ( 'NONE', #4207 ) ; +#4303 = VERTEX_POINT ( 'NONE', #2115 ) ; +#4304 = PERSON_AND_ORGANIZATION ( #2110, #4573 ) ; +#4305 = ORIENTED_EDGE ( 'NONE', *, *, #1180, .T. ) ; +#4306 = ADVANCED_FACE ( 'NONE', ( #2286 ), #1567, .T. ) ; +#4307 = EDGE_CURVE ( 'NONE', #4124, #3370, #1438, .T. ) ; +#4308 = FACE_OUTER_BOUND ( 'NONE', #3788, .T. ) ; +#4309 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949971700, -13.91766076750309400 ) ) ; +#4310 = CARTESIAN_POINT ( 'NONE', ( 12.88750348193718400, -13.44627106073971100, -3.332597199330518600 ) ) ; +#4311 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949971200, -7.834640608427718300 ) ) ; +#4312 = ORIENTED_EDGE ( 'NONE', *, *, #2181, .F. ) ; +#4313 = AXIS2_PLACEMENT_3D ( 'NONE', #3101, #905, #3475 ) ; +#4314 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -6.199983233560548300 ) ) ; +#4315 = LINE ( 'NONE', #3180, #2545 ) ; +#4316 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.146386871659068900E-032, -9.912705577010325500E-017 ) ) ; +#4317 = ORIENTED_EDGE ( 'NONE', *, *, #1212, .F. ) ; +#4318 = CARTESIAN_POINT ( 'NONE', ( 12.57902996823596300, -11.23235770031168600, -7.762259327751841000 ) ) ; +#4319 = CARTESIAN_POINT ( 'NONE', ( 1.103877387900677100, -11.15159450684610900, 9.656021659387224800 ) ) ; +#4320 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4321 = CARTESIAN_POINT ( 'NONE', ( 13.10214950649351800, -11.63176217742977200, 3.906275432219433500 ) ) ; +#4322 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4323 = CARTESIAN_POINT ( 'NONE', ( -0.1059308559342720900, -11.51826409503640900, 8.630774268384005400 ) ) ; +#4324 = CARTESIAN_POINT ( 'NONE', ( 40.19174207655505900, 12.49999753194997300, 17.50001676643945100 ) ) ; +#4325 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 8.019335917570373600E-017 ) ) ; +#4326 = ADVANCED_FACE ( 'NONE', ( #1312 ), #3717, .F. ) ; +#4327 = CIRCLE ( 'NONE', #443, 1.200000000000005700 ) ; +#4328 = VERTEX_POINT ( 'NONE', #804 ) ; +#4329 = CARTESIAN_POINT ( 'NONE', ( 15.46713658568060400, -11.54910152708405000, -5.332228415064696100 ) ) ; +#4330 = CARTESIAN_POINT ( 'NONE', ( 14.00755175911287300, 2.627288019610017200, -12.87978940825534300 ) ) ; +#4331 = EDGE_CURVE ( 'NONE', #1946, #3521, #1238, .T. ) ; +#4332 = ORIENTED_EDGE ( 'NONE', *, *, #1538, .T. ) ; +#4333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4334 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999998200, 6.747595387856066800, -10.47242612937174400 ) ) ; +#4335 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 2.499997531949972100, -14.99998323356054700 ) ) ; +#4336 = ORIENTED_EDGE ( 'NONE', *, *, #927, .F. ) ; +#4337 = CARTESIAN_POINT ( 'NONE', ( 0.6496542735128161300, -13.11737994431847600, 7.415429138009328000 ) ) ; +#4338 = EDGE_LOOP ( 'NONE', ( #1287, #1339, #1354, #1396 ) ) ; +#4339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4340 = ORIENTED_EDGE ( 'NONE', *, *, #964, .F. ) ; +#4341 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #4171, #471, #3486 ), + ( #1328, #3830, #1739 ), + ( #4188, #2086, #4539 ), + ( #2433, #93, #2776 ), + ( #515, #3130, #923 ), + ( #3495, #1345, #3847 ), + ( #1746, #4202, #2102 ), + ( #4553, #2444, #112 ), + ( #2790, #527, #3147 ), + ( #946, #3509, #1362 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001005536426587296800, 0.002011072853174593500, 0.003016609279761890300, 0.004022145706349187000 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.4745880129960257700, 1.000000000000000000), + ( 1.000000000000000000, 0.4921726173930184300, 1.000000000000000000), + ( 1.000000000000000000, 0.5122654682738084800, 1.000000000000000000), + ( 1.000000000000000000, 0.5540720504695236800, 1.000000000000000000), + ( 1.000000000000000000, 0.5757922587185845300, 1.000000000000000000), + ( 1.000000000000000000, 0.6185372149796363200, 1.000000000000000000), + ( 1.000000000000000000, 0.6389809995178088500, 1.000000000000000000), + ( 1.000000000000000000, 0.6761798407471106800, 1.000000000000000000), + ( 1.000000000000000000, 0.6929741089836999300, 1.000000000000000000), + ( 1.000000000000000000, 0.7071067811865455700, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4342 = ORIENTED_EDGE ( 'NONE', *, *, #1107, .F. ) ; +#4343 = AXIS2_PLACEMENT_3D ( 'NONE', #2205, #4646, #2550 ) ; +#4344 = CARTESIAN_POINT ( 'NONE', ( 12.82676273526921000, -13.44997810939954700, -3.920755258471319700 ) ) ; +#4345 = ORIENTED_EDGE ( 'NONE', *, *, #583, .F. ) ; +#4346 = CARTESIAN_POINT ( 'NONE', ( 1.590293031889156600, -10.31632505395870000, -11.29882593558737700 ) ) ; +#4347 = ORIENTED_EDGE ( 'NONE', *, *, #437, .F. ) ; +#4348 = ORIENTED_EDGE ( 'NONE', *, *, #1187, .T. ) ; +#4349 = VERTEX_POINT ( 'NONE', #4097 ) ; +#4350 = ORIENTED_EDGE ( 'NONE', *, *, #16, .F. ) ; +#4351 = AXIS2_PLACEMENT_3D ( 'NONE', #974, #4236, #2139 ) ; +#4352 = CARTESIAN_POINT ( 'NONE', ( 15.01809203761387900, 3.020815579722482700, 12.48192472882627700 ) ) ; +#4353 = EDGE_LOOP ( 'NONE', ( #292, #4350, #554 ) ) ; +#4354 = ORIENTED_EDGE ( 'NONE', *, *, #3272, .T. ) ; +#4355 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 0.0000000000000000000, 15.00001676643945100 ) ) ; +#4356 = VERTEX_POINT ( 'NONE', #3021 ) ; +#4357 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#4358 = VERTEX_POINT ( 'NONE', #3391 ) ; +#4359 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-015, -11.33640205742938900, 11.22377341792961200 ) ) ; +#4360 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4361 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #3616, #1476, #242, #1492 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 0.1495061715445722400, 1.570796326794896800 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8386274899012953200, 0.8386274899012953200, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#4362 = ORIENTED_EDGE ( 'NONE', *, *, #1144, .F. ) ; +#4363 = EDGE_CURVE ( 'NONE', #3177, #1344, #1431, .T. ) ; +#4364 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999997800, 7.597114959037287300, -10.99998323356054700 ) ) ; +#4365 = CARTESIAN_POINT ( 'NONE', ( 1.863535282006606000, -10.65557951434298500, -10.20142919904823800 ) ) ; +#4366 = FACE_OUTER_BOUND ( 'NONE', #3775, .T. ) ; +#4367 = CARTESIAN_POINT ( 'NONE', ( 15.66084200552546300, 5.005750903667499900, 12.70700635980866100 ) ) ; +#4368 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2755, #4515, #3822 ), + ( #1726, #4176, #2074 ), + ( #4530, #2418, #83 ), + ( #2769, #501, #3116 ), + ( #916, #3491, #1338 ), + ( #3837, #1741, #4193 ), + ( #2090, #4543, #2436 ), + ( #101, #2780, #520 ), + ( #3135, #929, #3499 ), + ( #1352, #3854, #1749 ), + ( #4206, #2109, #4559 ), + ( #2448, #119, #2799 ), + ( #535, #3152, #955 ), + ( #3515, #1365, #3874 ) ), + .UNSPECIFIED., .F., .F., .F. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 3.141592653589793100, 3.337942194439155400, 3.534291735288517300, 3.730641276137879100, 3.926990816987241400, 4.319689898685965100, 4.712388980384689700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.7070717282145601000, 1.000000000000000000), + ( 1.000000000000000000, 0.7117460027459026100, 1.000000000000000000), + ( 1.000000000000000000, 0.7291288937974127500, 1.000000000000000000), + ( 1.000000000000000000, 0.7418334181785035700, 1.000000000000000000), + ( 1.000000000000000000, 0.7723968215186989300, 1.000000000000000000), + ( 1.000000000000000000, 0.7902180089062973400, 1.000000000000000000), + ( 1.000000000000000000, 0.8275942693370437200, 1.000000000000000000), + ( 1.000000000000000000, 0.8471316606207607300, 1.000000000000000000), + ( 1.000000000000000000, 0.9038128901117941100, 1.000000000000000000), + ( 1.000000000000000000, 0.9386556510583599100, 1.000000000000000000), + ( 1.000000000000000000, 0.9867291887039525400, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000), + ( 1.000000000000000000, 1.000000000000000000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4369 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.99999753195013200, 65.73015992574794100 ) ) ; +#4370 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#4371 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4372 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 6.747595387856067700, -10.47242612937174200 ) ) ; +#4373 = AXIS2_PLACEMENT_3D ( 'NONE', #2934, #2591, #708 ) ; +#4374 = CARTESIAN_POINT ( 'NONE', ( 12.69638429499434000, 7.889153819321573600, -7.633045487469477300 ) ) ; +#4375 = AXIS2_PLACEMENT_3D ( 'NONE', #3908, #1804, #4257 ) ; +#4376 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4377 = LINE ( 'NONE', #4472, #3339 ) ; +#4378 = VERTEX_POINT ( 'NONE', #2334 ) ; +#4379 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -8.650412125649539900, 15.95981998543415900 ) ) ; +#4380 = CARTESIAN_POINT ( 'NONE', ( 18.42951269203162600, 7.369860914666301000, 8.808756189745329500 ) ) ; +#4381 = CARTESIAN_POINT ( 'NONE', ( 2.123081847638032200, 23.27874953951095100, 69.64967276987472600 ) ) ; +#4382 = DIRECTION ( 'NONE', ( -1.368455531567204200E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#4383 = LINE ( 'NONE', #580, #4159 ) ; +#4384 = ORIENTED_EDGE ( 'NONE', *, *, #1069, .F. ) ; +#4385 = CARTESIAN_POINT ( 'NONE', ( 12.87691815236560100, 23.27874953951110400, 69.64967276987214000 ) ) ; +#4386 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ; +#4387 = CARTESIAN_POINT ( 'NONE', ( 15.05577622914452700, 3.244746686838852100, -13.76770913345428000 ) ) ; +#4388 = ORIENTED_EDGE ( 'NONE', *, *, #1034, .F. ) ; +#4389 = EDGE_CURVE ( 'NONE', #3256, #4071, #1178, .T. ) ; +#4390 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ; +#4391 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.24558888443481300, 65.66768887603204500 ) ) ; +#4392 = VERTEX_POINT ( 'NONE', #3408 ) ; +#4393 = CARTESIAN_POINT ( 'NONE', ( 2.824675324675325300, -10.69511892927339900, 20.00001676643945100 ) ) ; +#4394 = ORIENTED_EDGE ( 'NONE', *, *, #3510, .F. ) ; +#4395 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #1370, #1755, #4575 ), + ( #2463, #135, #2820 ), + ( #558, #3168, #973 ), + ( #3534, #1391, #3889 ), + ( #1791, #4235, #2138 ), + ( #4584, #2479, #149 ), + ( #2831, #575, #3187 ), + ( #989, #3548, #1413 ), + ( #3907, #1803, #4256 ), + ( #2155, #4603, #2495 ), + ( #171, #2846, #589 ), + ( #3203, #1007, #3560 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001282372003542559400, 0.002564744007085118800, 0.003205930008856398300, 0.003847116010627678200, 0.005129488014170237700 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.3941798799759270200, 1.000000000000000000), + ( 1.000000000000000000, 0.3942238801523998400, 1.000000000000000000), + ( 1.000000000000000000, 0.3988054721940229600, 1.000000000000000000), + ( 1.000000000000000000, 0.4175571669227423600, 1.000000000000000000), + ( 1.000000000000000000, 0.4318923176864792300, 1.000000000000000000), + ( 1.000000000000000000, 0.4614501231004745100, 1.000000000000000000), + ( 1.000000000000000000, 0.4726826350538097000, 1.000000000000000000), + ( 1.000000000000000000, 0.4985879123383938300, 1.000000000000000000), + ( 1.000000000000000000, 0.5133394360877535600, 1.000000000000000000), + ( 1.000000000000000000, 0.5639599144809669400, 1.000000000000000000), + ( 1.000000000000000000, 0.6055495813174104300, 1.000000000000000000), + ( 1.000000000000000000, 0.6624054580141178800, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4396 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 22.41532046723410300, 65.22833310671778400 ) ) ; +#4397 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#4398 = ORIENTED_EDGE ( 'NONE', *, *, #1921, .T. ) ; +#4399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4400 = ORIENTED_EDGE ( 'NONE', *, *, #1552, .T. ) ; +#4401 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999800, 22.18499628359147000, 68.39036078272670200 ) ) ; +#4402 = ORIENTED_EDGE ( 'NONE', *, *, #2132, .T. ) ; +#4403 = EDGE_LOOP ( 'NONE', ( #4598, #4645, #4737, #4756 ) ) ; +#4404 = AXIS2_PLACEMENT_3D ( 'NONE', #798, #3387, #1220 ) ; +#4405 = ORIENTED_EDGE ( 'NONE', *, *, #4240, .F. ) ; +#4406 = ORIENTED_EDGE ( 'NONE', *, *, #1212, .T. ) ; +#4407 = CARTESIAN_POINT ( 'NONE', ( 40.09995622936722300, 12.49999753194997400, 16.82938912130609700 ) ) ; +#4408 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000000, 19.98722159839779500, 70.00001676643945800 ) ) ; +#4409 = ORIENTED_EDGE ( 'NONE', *, *, #599, .T. ) ; +#4410 = ORIENTED_EDGE ( 'NONE', *, *, #1950, .F. ) ; +#4411 = CARTESIAN_POINT ( 'NONE', ( 7.949038979616904100E-032, 20.55293979002668100, 69.12739377866303400 ) ) ; +#4412 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4413 = CARTESIAN_POINT ( 'NONE', ( 0.9330685250265657900, 3.244746686838851300, -12.77886437928318800 ) ) ; +#4414 = CARTESIAN_POINT ( 'NONE', ( 11.00679128130450100, 20.55293979002667400, 69.89760508273241200 ) ) ; +#4415 = LINE ( 'NONE', #1627, #2538 ) ; +#4416 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, 24.99999753194998300, 60.10161676643944900 ) ) ; +#4417 = VERTEX_POINT ( 'NONE', #3752 ) ; +#4418 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 20.93026349232823300, 65.00001677046101600 ) ) ; +#4419 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3108, #894, #4167, #911 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.002542744231120836900 ), + .UNSPECIFIED. ) ; +#4420 = CARTESIAN_POINT ( 'NONE', ( 12.55626922007331500, 24.21732426385967000, 69.00006272615500800 ) ) ; +#4421 = VECTOR ( 'NONE', #3604, 1000.000000000000000 ) ; +#4422 = EDGE_CURVE ( 'NONE', #2269, #2589, #1305, .T. ) ; +#4423 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4424 = AXIS2_PLACEMENT_3D ( 'NONE', #3120, #918, #506 ) ; +#4425 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4426 = CARTESIAN_POINT ( 'NONE', ( 12.81223327449763100, -11.02814794523394300, -8.848439766094779600 ) ) ; +#4427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.559374635020935700E-016, -1.000000000000000000 ) ) ; +#4428 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4429 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4430 = VECTOR ( 'NONE', #3817, 1000.000000000000000 ) ; +#4431 = ORIENTED_EDGE ( 'NONE', *, *, #2826, .F. ) ; +#4432 = AXIS2_PLACEMENT_3D ( 'NONE', #1899, #2242, #4682 ) ; +#4433 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4434 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4435 = VERTEX_POINT ( 'NONE', #14 ) ; +#4436 = CARTESIAN_POINT ( 'NONE', ( 1.501924492887375600, 7.499997531949971700, -7.838943926838993500 ) ) ; +#4437 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -6.631762177429775000, 13.50001676643945100 ) ) ; +#4438 = EDGE_LOOP ( 'NONE', ( #3400, #3012, #3109, #3117 ) ) ; +#4439 = PLANE ( 'NONE', #1018 ) ; +#4440 = CARTESIAN_POINT ( 'NONE', ( 14.08715237125114200, -12.01189854471799200, -11.07183020340313300 ) ) ; +#4441 = EDGE_LOOP ( 'NONE', ( #3238, #3246, #3261, #3266 ) ) ; +#4442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4443 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .F. ) ; +#4444 = CARTESIAN_POINT ( 'NONE', ( 73.21443512576246300, -15.69321633482546100, 67.63890565532833000 ) ) ; +#4445 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942017700E-016, -5.711846095760980000, -15.27307068911293600 ) ) ; +#4446 = ORIENTED_EDGE ( 'NONE', *, *, #1725, .T. ) ; +#4447 = EDGE_CURVE ( 'NONE', #1329, #3405, #1048, .T. ) ; +#4448 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 7.499997531949976100, -14.99998323356054400 ) ) ; +#4449 = ORIENTED_EDGE ( 'NONE', *, *, #909, .F. ) ; +#4450 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #4506 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1504, #3991, #1889 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#4451 = VERTEX_POINT ( 'NONE', #842 ) ; +#4452 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122082400, -0.1736481776669296900 ) ) ; +#4454 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -13.17394646130280100, 20.00001676643945100 ) ) ; +#4455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4456 = DIRECTION ( 'NONE', ( -1.368455531567204200E-048, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#4457 = ORIENTED_EDGE ( 'NONE', *, *, #422, .F. ) ; +#4458 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 67.50001676643944400 ) ) ; +#4459 = ORIENTED_EDGE ( 'NONE', *, *, #2533, .T. ) ; +#4460 = ORIENTED_EDGE ( 'NONE', *, *, #1224, .T. ) ; +#4461 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -4.999983233560542800 ) ) ; +#4462 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999998200, 6.747595387856066800, -10.47242612937174400 ) ) ; +#4463 = ORIENTED_EDGE ( 'NONE', *, *, #2447, .T. ) ; +#4464 = CARTESIAN_POINT ( 'NONE', ( 12.52520460507606800, 7.386685295702799100, -8.897168712738267300 ) ) ; +#4465 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#4466 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#4467 = CARTESIAN_POINT ( 'NONE', ( 12.69113790981005800, -11.63176217742977100, 0.3161366293459441100 ) ) ; +#4468 = CARTESIAN_POINT ( 'NONE', ( 15.33728930434717000, 4.399954062412461100, -13.42989344321123500 ) ) ; +#4469 = CARTESIAN_POINT ( 'NONE', ( 14.45853533475964500, -13.04571014027947800, 8.132236247352443200 ) ) ; +#4470 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999107400, 2.426704368369702300, -12.91515771785803000 ) ) ; +#4471 = DIRECTION ( 'NONE', ( -0.4463010568409033200, 0.8948828787403929600, 0.0000000000000000000 ) ) ; +#4472 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.627288019610017200, -12.87978940825534300 ) ) ; +#4473 = VECTOR ( 'NONE', #1154, 1000.000000000000000 ) ; +#4474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4475 = CARTESIAN_POINT ( 'NONE', ( 2.986646403681584500, 7.752955674665323600, -9.868234298345948100 ) ) ; +#4476 = EDGE_CURVE ( 'NONE', #236, #42, #1111, .T. ) ; +#4477 = CARTESIAN_POINT ( 'NONE', ( 13.09595084949612900, 7.091713549911118800, -9.815897398810889700 ) ) ; +#4478 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3944, #1854, #4310 ), + ( #2200, #4641, #2547 ), + ( #234, #2895, #652 ), + ( #3259, #1066, #3612 ), + ( #1486, #3972, #1863 ), + ( #4321, #2219, #4655 ), + ( #2558, #253, #2912 ), + ( #670, #3274, #1089 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.002710121962509986400, 0.005420243925019972900, 0.01084048785003994600 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.3045415543813885800, 1.000000000000000000), + ( 1.000000000000000000, 0.3174423532643412300, 1.000000000000000000), + ( 1.000000000000000000, 0.3319654844441028400, 1.000000000000000000), + ( 1.000000000000000000, 0.3631371661763189200, 1.000000000000000000), + ( 1.000000000000000000, 0.3797818789045279700, 1.000000000000000000), + ( 1.000000000000000000, 0.4317239621395609900, 1.000000000000000000), + ( 1.000000000000000000, 0.4689973629686321500, 1.000000000000000000), + ( 1.000000000000000000, 0.5071401350274417100, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4479 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4480 = AXIS2_PLACEMENT_3D ( 'NONE', #3310, #1120, #3655 ) ; +#4481 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4482 = CARTESIAN_POINT ( 'NONE', ( 16.27070757860995100, 5.862195374284415700, -11.56393302981698000 ) ) ; +#4483 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999994700, -15.49639287651101900, 25.82106484927767200 ) ) ; +#4484 = CARTESIAN_POINT ( 'NONE', ( 37.67129038436222300, 12.49999753194997600, 15.00001676643945300 ) ) ; +#4485 = LINE ( 'NONE', #2067, #4491 ) ; +#4486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9641149129481739700, 0.2654852813828573200 ) ) ; +#4487 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -6.789904936540701800, 15.00001676643945100 ) ) ; +#4488 = ORIENTED_EDGE ( 'NONE', *, *, #4389, .F. ) ; +#4489 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4490 = CARTESIAN_POINT ( 'NONE', ( 2.497732823087416100, 7.307074935584565400, -9.267401766715192200 ) ) ; +#4491 = VECTOR ( 'NONE', #2407, 1000.000000000000000 ) ; +#4492 = CARTESIAN_POINT ( 'NONE', ( 11.95276956141131200, 7.723110976498635000, -9.894015872991525700 ) ) ; +#4493 = EDGE_LOOP ( 'NONE', ( #2036, #999, #4018, #3065, #1258, #152 ) ) ; +#4494 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 26.77590825245414800, 41.25001676643945100 ) ) ; +#4495 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999100, -10.73006661609826100, 10.37854898555514500 ) ) ; +#4496 = ORIENTED_EDGE ( 'NONE', *, *, #1385, .T. ) ; +#4497 = CARTESIAN_POINT ( 'NONE', ( 3.349989382909062100, 7.597114959037339700, -9.999983233560565000 ) ) ; +#4498 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1481, #3606, #3964, #1859, #4319, #2213, #4651, #2554 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001689791528076197700, 0.002534687292114296600, 0.003379583056152395500 ), + .UNSPECIFIED. ) ; +#4499 = CARTESIAN_POINT ( 'NONE', ( 19.28926890504290300, 7.499997531949973400, -8.426916520892252300 ) ) ; +#4500 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#4501 = ORIENTED_EDGE ( 'NONE', *, *, #3629, .F. ) ; +#4502 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000000000, -4.669957029759402200, -15.18191720718618700 ) ) ; +#4503 = CARTESIAN_POINT ( 'NONE', ( 14.99999999999999800, 23.83988570249762200, 68.16191830911324700 ) ) ; +#4504 = CARTESIAN_POINT ( 'NONE', ( 13.99999999999999800, -6.631762177429775000, 7.500016766439451900 ) ) ; +#4505 = CARTESIAN_POINT ( 'NONE', ( 2.060320775599505000, -10.88170213150659300, -9.380260559390531900 ) ) ; +#4506 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1504, 'distance_accuracy_value', 'NONE'); +#4507 = ORIENTED_EDGE ( 'NONE', *, *, #264, .F. ) ; +#4508 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999998700, 7.404783783242378600, -8.805759462705077900 ) ) ; +#4509 = ORIENTED_EDGE ( 'NONE', *, *, #1380, .T. ) ; +#4510 = CARTESIAN_POINT ( 'NONE', ( 15.66987298107780000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#4511 = ORIENTED_EDGE ( 'NONE', *, *, #4447, .T. ) ; +#4512 = EDGE_CURVE ( 'NONE', #3184, #3913, #917, .T. ) ; +#4513 = CARTESIAN_POINT ( 'NONE', ( -0.07997261454146024900, -10.69090487840527900, -10.09114648580627200 ) ) ; +#4514 = EDGE_LOOP ( 'NONE', ( #3181, #3186, #3196, #3201 ) ) ; +#4515 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.499997531949969000, 12.50001676643944900 ) ) ; +#4516 = CIRCLE ( 'NONE', #1620, 5.000000000000000000 ) ; +#4517 = CARTESIAN_POINT ( 'NONE', ( 11.85425575235877500, 7.673014279969237400, -9.937506633144593600 ) ) ; +#4518 = ORIENTED_EDGE ( 'NONE', *, *, #1444, .T. ) ; +#4519 = CARTESIAN_POINT ( 'NONE', ( 11.49999999999999600, 12.49999753194997600, -9.999983233560547200 ) ) ; +#4520 = AXIS2_PLACEMENT_3D ( 'NONE', #1530, #4006, #1905 ) ; +#4521 = CARTESIAN_POINT ( 'NONE', ( 0.002330373367839507300, 2.579063988065848400, -12.88829260613511700 ) ) ; +#4522 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998300, 69.50001676643945800 ) ) ; +#4523 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.131762177429774100, -16.19731048123461300 ) ) ; +#4524 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949969400, 7.500016766439451000 ) ) ; +#4525 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.559374635020935700E-016, 1.000000000000000000 ) ) ; +#4526 = LINE ( 'NONE', #4527, #3488 ) ; +#4527 = CARTESIAN_POINT ( 'NONE', ( 11.25000000000000000, 24.99999753194998300, -16.84376276178052500 ) ) ; +#4528 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#4529 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #4210, #939, #3505, #2117 ), + .UNSPECIFIED., .F., .F. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 4.712388980384689700, 6.283185307179586200 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#4530 = CARTESIAN_POINT ( 'NONE', ( -0.03223043968188842700, 3.154487910997114200, 13.46134023882108700 ) ) ; +#4531 = LOCAL_TIME ( 15, 8, 41.00000000000000000, #4726 ) ; +#4532 = CARTESIAN_POINT ( 'NONE', ( -1.485281374238571300, 7.499997531949969000, 10.42894895457397400 ) ) ; +#4533 = CARTESIAN_POINT ( 'NONE', ( 1.165417648256180200, -12.34049684824549000, -10.17982295743313700 ) ) ; +#4534 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #3508, #1361, #3866 ), + ( #1759, #4212, #2121 ), + ( #4570, #2454, #125 ), + ( #2811, #543, #3158 ), + ( #961, #3523, #1375 ), + ( #3881, #1778, #4224 ), + ( #2129, #4578, #2468 ), + ( #139, #2824, #564 ), + ( #3171, #977, #3540 ), + ( #1398, #3895, #1795 ), + ( #4242, #2142, #4588 ), + ( #2485, #155, #2836 ), + ( #578, #3193, #992 ), + ( #2469, #140, #2825 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.0008775108482228668000, 0.001755021696445733600, 0.002632532544668600500, 0.003510043392891467200, 0.005265065089337201000, 0.007020086785782934400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.3045415543813866400, 1.000000000000000000), + ( 1.000000000000000000, 0.2997958347168831500, 1.000000000000000000), + ( 1.000000000000000000, 0.2964441708132714600, 1.000000000000000000), + ( 1.000000000000000000, 0.2927919038425513800, 1.000000000000000000), + ( 1.000000000000000000, 0.2924973199745316000, 1.000000000000000000), + ( 1.000000000000000000, 0.2949706044176935700, 1.000000000000000000), + ( 1.000000000000000000, 0.2977362315655895900, 1.000000000000000000), + ( 1.000000000000000000, 0.3060387183135275800, 1.000000000000000000), + ( 1.000000000000000000, 0.3115708585195606800, 1.000000000000000000), + ( 1.000000000000000000, 0.3316175006787218700, 1.000000000000000000), + ( 1.000000000000000000, 0.3495446611879554100, 1.000000000000000000), + ( 1.000000000000000000, 0.3901173351031027000, 1.000000000000000000), + ( 1.000000000000000000, 0.4128268454491939600, 1.000000000000000000), + ( 1.000000000000000000, 0.4366246731659662000, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4535 = CARTESIAN_POINT ( 'NONE', ( 0.9627461243202225500, 3.039514420864444200, -12.80977854573765700 ) ) ; +#4536 = CARTESIAN_POINT ( 'NONE', ( 13.58807031624368200, -10.07488439418194300, -11.77563218511234000 ) ) ; +#4537 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4538 = CARTESIAN_POINT ( 'NONE', ( 4.397918137561991800, 20.94988510403725400, 69.40784625110310900 ) ) ; +#4539 = CARTESIAN_POINT ( 'NONE', ( 0.7247020832190296200, -11.73287282974559400, -11.69111263188497100 ) ) ; +#4540 = EDGE_CURVE ( 'NONE', #3416, #3746, #658, .T. ) ; +#4541 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -9.131762177429775900, -14.20299705715771100 ) ) ; +#4542 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999997800, 12.49999753194997600, -8.999983233560549000 ) ) ; +#4543 = CARTESIAN_POINT ( 'NONE', ( -0.4817056699515744900, 4.695086755236823200, 12.01831109648723000 ) ) ; +#4544 = PRODUCT ( 'Trigger_Guard', 'Trigger_Guard', '', ( #2932 ) ) ; +#4545 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.146386871659068900E-032, 9.912705577010325500E-017 ) ) ; +#4546 = ORIENTED_EDGE ( 'NONE', *, *, #847, .F. ) ; +#4547 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 2.499997531949969000, 15.00001676643945100 ) ) ; +#4548 = CARTESIAN_POINT ( 'NONE', ( 4.644605581370586700, 20.14674148369008200, 70.00001676643945800 ) ) ; +#4549 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4550 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4551 = VERTEX_POINT ( 'NONE', #3071 ) ; +#4552 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#4553 = CARTESIAN_POINT ( 'NONE', ( 1.028927622303979200, -9.009479422221938100, -13.04155496236320400 ) ) ; +#4554 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9848077530122082400, -0.1736481776669296900 ) ) ; +#4555 = ORIENTED_EDGE ( 'NONE', *, *, #1069, .T. ) ; +#4556 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4557 = ADVANCED_FACE ( 'NONE', ( #457 ), #529, .T. ) ; +#4558 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #1730, #462, #4532, #2422 ), + .UNSPECIFIED., .F., .T. ) + B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ), + ( 3.141592653589793100, 4.712388980384689700 ), + .UNSPECIFIED. ) + CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243649400, 0.8047378541243649400, 1.000000000000000000 ) ) + REPRESENTATION_ITEM ( '' ) ); +#4559 = CARTESIAN_POINT ( 'NONE', ( -1.978286119586821500, 6.868929474346757900, 10.01811166678385400 ) ) ; +#4560 = ORIENTED_EDGE ( 'NONE', *, *, #1562, .F. ) ; +#4561 = ORIENTED_EDGE ( 'NONE', *, *, #4422, .T. ) ; +#4562 = CARTESIAN_POINT ( 'NONE', ( 12.17532467532467400, -10.69511892927339900, 60.10161676643944900 ) ) ; +#4563 = CARTESIAN_POINT ( 'NONE', ( 14.33012701892219300, -11.63176217742977200, -14.39404467726971100 ) ) ; +#4564 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3222, #614, #4633, #2530, #215, #2883, #638, #3240, #1052, #3599 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 4.336808689942017700E-019, 0.0003938331721222319500, 0.0007876663442444634600, 0.001181499516366695000, 0.001575332688488926500 ), + .UNSPECIFIED. ) ; +#4565 = CARTESIAN_POINT ( 'NONE', ( 14.92941873556324200, -10.07579608076596100, -15.71581185338758900 ) ) ; +#4566 = ORIENTED_EDGE ( 'NONE', *, *, #128, .T. ) ; +#4567 = ORIENTED_EDGE ( 'NONE', *, *, #1235, .F. ) ; +#4568 = EDGE_CURVE ( 'NONE', #634, #3016, #970, .T. ) ; +#4569 = CARTESIAN_POINT ( 'NONE', ( 0.5000000000000004400, 7.499997531949971700, -4.999983233560542800 ) ) ; +#4570 = CARTESIAN_POINT ( 'NONE', ( 2.738314740213103600, -11.62694341870022900, -3.843363903011710400 ) ) ; +#4571 = VERTEX_POINT ( 'NONE', #4146 ) ; +#4572 = ORIENTED_EDGE ( 'NONE', *, *, #3424, .F. ) ; +#4573 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#4574 = CARTESIAN_POINT ( 'NONE', ( 2.184024597907219300, -13.45669137090759200, -3.925107718907494100 ) ) ; +#4575 = CARTESIAN_POINT ( 'NONE', ( 13.44622222222216100, 24.99999753195003300, 69.35280431832524100 ) ) ; +#4576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4577 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -23.22509174754585700, 7.500016766439451000 ) ) ; +#4578 = CARTESIAN_POINT ( 'NONE', ( -0.4690011161623636700, -11.55049058924835100, -5.314701487758182600 ) ) ; +#4579 = CARTESIAN_POINT ( 'NONE', ( 12.82596613692792600, -13.44994097185007200, -3.929897450818385300 ) ) ; +#4580 = CARTESIAN_POINT ( 'NONE', ( 73.21443512576246300, 26.77590825245414800, 41.25001676643945100 ) ) ; +#4581 = CIRCLE ( 'NONE', #1535, 1.000000000000000000 ) ; +#4582 = CARTESIAN_POINT ( 'NONE', ( 40.19174207655505900, 12.49999753194997300, 20.00001676643945100 ) ) ; +#4583 = ADVANCED_FACE ( 'NONE', ( #330 ), #136, .F. ) ; +#4584 = CARTESIAN_POINT ( 'NONE', ( 11.98586158304664700, 22.56256560258907500, 69.11726237690285800 ) ) ; +#4585 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 9.099997531949975700, -9.999983233560549000 ) ) ; +#4586 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #3106, #2081, #4536, #2428, #88, #2774, #512, #3124 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001684143209336735600, 0.002526214814005107400, 0.003368286418673479400 ), + .UNSPECIFIED. ) ; +#4587 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.99999753194998300, 65.73015992574794100 ) ) ; +#4588 = CARTESIAN_POINT ( 'NONE', ( 1.778698723689591700, -12.98395882090605500, -7.948312488441112900 ) ) ; +#4589 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -3.799983233560538100 ) ) ; +#4590 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.156482317317871500E-016 ) ) ; +#4591 = EDGE_CURVE ( 'NONE', #1812, #1417, #194, .T. ) ; +#4592 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 17.50001676643945100 ) ) ; +#4593 = VERTEX_POINT ( 'NONE', #66 ) ; +#4594 = CC_DESIGN_APPROVAL ( #4129, ( #3657 ) ) ; +#4595 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499997531949972100, -13.91766076750309200 ) ) ; +#4596 = LINE ( 'NONE', #3080, #586 ) ; +#4597 = CARTESIAN_POINT ( 'NONE', ( 14.39166859824419100, -13.10273351276154900, 7.756391390534822100 ) ) ; +#4598 = ORIENTED_EDGE ( 'NONE', *, *, #1562, .T. ) ; +#4599 = AXIS2_PLACEMENT_3D ( 'NONE', #4678, #2581, #278 ) ; +#4600 = CARTESIAN_POINT ( 'NONE', ( 4.397918137561990000, 20.94988510403725400, 69.40784625110310900 ) ) ; +#4601 = CARTESIAN_POINT ( 'NONE', ( 14.00755175911287300, 2.627288019610017200, -12.87978940825534300 ) ) ; +#4602 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ; +#4603 = CARTESIAN_POINT ( 'NONE', ( 11.27188965060870300, 21.54420527211651000, 70.00374511222405300 ) ) ; +#4604 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -1.734723475976807300E-016 ) ) ; +#4605 = CARTESIAN_POINT ( 'NONE', ( 13.20837432565980600, -12.96664603309567800, -12.54328693733198300 ) ) ; +#4606 = AXIS2_PLACEMENT_3D ( 'NONE', #2192, #4638, #2543 ) ; +#4607 = CARTESIAN_POINT ( 'NONE', ( 3.615377270216471500, 20.75467198541940000, 69.81993473080309800 ) ) ; +#4608 = ORIENTED_EDGE ( 'NONE', *, *, #3174, .T. ) ; +#4609 = CARTESIAN_POINT ( 'NONE', ( -4.407724087534469400, 7.499997531949972500, -8.545371703384610400 ) ) ; +#4610 = EDGE_LOOP ( 'NONE', ( #606, #622, #674, #701 ) ) ; +#4611 = ORIENTED_EDGE ( 'NONE', *, *, #2222, .F. ) ; +#4612 = CARTESIAN_POINT ( 'NONE', ( 13.89650548473949800, -11.15065269991161600, 9.658000139028610300 ) ) ; +#4613 = ORIENTED_EDGE ( 'NONE', *, *, #685, .T. ) ; +#4614 = ORIENTED_EDGE ( 'NONE', *, *, #1781, .F. ) ; +#4615 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4616 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -4.999983233560542800 ) ) ; +#4617 = CARTESIAN_POINT ( 'NONE', ( 14.84660013596129400, -10.39746608702718900, -13.33058673170414600 ) ) ; +#4618 = ADVANCED_FACE ( 'NONE', ( #202 ), #4368, .T. ) ; +#4619 = ORIENTED_EDGE ( 'NONE', *, *, #2181, .T. ) ; +#4620 = EDGE_CURVE ( 'NONE', #3917, #4071, #78, .T. ) ; +#4621 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4622 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#4623 = CARTESIAN_POINT ( 'NONE', ( 2.623948404799202100, 23.44900171356470500, 69.03742324458578100 ) ) ; +#4624 = CARTESIAN_POINT ( 'NONE', ( -1.270707578610218700, 5.862195374284190100, -11.56393302981700400 ) ) ; +#4625 = CARTESIAN_POINT ( 'NONE', ( 0.6496542735128501000, -13.11737994431847400, 7.415429138009331600 ) ) ; +#4626 = CARTESIAN_POINT ( 'NONE', ( 13.48027658118971700, -12.63176217742977800, 7.500016766439451000 ) ) ; +#4627 = FACE_OUTER_BOUND ( 'NONE', #1403, .T. ) ; +#4628 = CARTESIAN_POINT ( 'NONE', ( -0.5752175157703437500, 4.871694298500344200, -12.25942309265752100 ) ) ; +#4629 = CIRCLE ( 'NONE', #2167, 32.50000000000000000 ) ; +#4630 = AXIS2_PLACEMENT_3D ( 'NONE', #2658, #1617, #4086 ) ; +#4631 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4632 = CARTESIAN_POINT ( 'NONE', ( 13.33994368552801800, -10.39882496560464500, -11.03629413659689700 ) ) ; +#4633 = CARTESIAN_POINT ( 'NONE', ( 1.817108400051684600, 7.543666305740585700, -7.907961246273377900 ) ) ; +#4634 = CARTESIAN_POINT ( 'NONE', ( 2.508155285183536700, -11.63176217742977200, -1.479628172838398200 ) ) ; +#4635 = CARTESIAN_POINT ( 'NONE', ( 1.622321813560216000, 7.252936484952242900, -9.390773043256716700 ) ) ; +#4636 = ADVANCED_FACE ( 'NONE', ( #82 ), #1610, .T. ) ; +#4637 = CARTESIAN_POINT ( 'NONE', ( -24.81231148580448600, 12.49999753194997100, 16.20670324810537700 ) ) ; +#4638 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4639 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.156482317317871500E-016, -1.000000000000000000 ) ) ; +#4640 = VERTEX_POINT ( 'NONE', #3886 ) ; +#4641 = CARTESIAN_POINT ( 'NONE', ( 15.36471304095281300, -11.63176217742301200, -2.720554063815487900 ) ) ; +#4642 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4643 = EDGE_CURVE ( 'NONE', #31, #1599, #2611, .T. ) ; +#4644 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#4645 = ORIENTED_EDGE ( 'NONE', *, *, #2855, .F. ) ; +#4646 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#4647 = CARTESIAN_POINT ( 'NONE', ( 4.680784237594751000, -14.13176217742977400, -11.35960056912454300 ) ) ; +#4648 = ORIENTED_EDGE ( 'NONE', *, *, #1206, .T. ) ; +#4649 = AXIS2_PLACEMENT_3D ( 'NONE', #3621, #1495, #3982 ) ; +#4650 = CARTESIAN_POINT ( 'NONE', ( 13.22378745950304200, -12.98161347118318800, -7.958315386448467700 ) ) ; +#4651 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999399400, -10.73048049682414600, 10.37802608356377500 ) ) ; +#4652 = ORIENTED_EDGE ( 'NONE', *, *, #3111, .T. ) ; +#4653 = ORIENTED_EDGE ( 'NONE', *, *, #1471, .F. ) ; +#4654 = AXIS2_PLACEMENT_3D ( 'NONE', #1025, #3938, #1834 ) ; +#4655 = CARTESIAN_POINT ( 'NONE', ( 13.87768688333580200, -13.26138922308421000, 3.817923490731851100 ) ) ; +#4656 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -4.223092916833829600, -7.643662237487771600 ) ) ; +#4657 = EDGE_LOOP ( 'NONE', ( #2800, #2805, #2812, #2844 ) ) ; +#4658 = CARTESIAN_POINT ( 'NONE', ( 1.331309360244865600, -11.51556730248669400, 8.606859079189055400 ) ) ; +#4659 = VERTEX_POINT ( 'NONE', #2476 ) ; +#4660 = CARTESIAN_POINT ( 'NONE', ( 20.00000000000000000, 7.499997531949971700, -7.834640608427718300 ) ) ; +#4661 = ORIENTED_EDGE ( 'NONE', *, *, #1513, .T. ) ; +#4662 = VERTEX_POINT ( 'NONE', #4582 ) ; +#4663 = ORIENTED_EDGE ( 'NONE', *, *, #1237, .F. ) ; +#4664 = CARTESIAN_POINT ( 'NONE', ( 12.25383203468398300, -11.55378528865806800, -5.270576342749292200 ) ) ; +#4665 = EDGE_LOOP ( 'NONE', ( #3966, #94, #3959, #4653 ) ) ; +#4666 = PERSON_AND_ORGANIZATION ( #2110, #4573 ) ; +#4667 = EDGE_CURVE ( 'NONE', #3405, #2972, #4315, .T. ) ; +#4668 = CARTESIAN_POINT ( 'NONE', ( 10.34523876147710900, 20.75316258357286300, 69.46581992194893500 ) ) ; +#4669 = CIRCLE ( 'NONE', #2045, 35.00000000000000000 ) ; +#4670 = CARTESIAN_POINT ( 'NONE', ( 0.9974822187215396400, 2.527048817758953200, -12.89746428406637000 ) ) ; +#4671 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4672 = AXIS2_PLACEMENT_3D ( 'NONE', #1732, #4179, #2077 ) ; +#4673 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 15.00001676643945100 ) ) ; +#4674 = AXIS2_PLACEMENT_3D ( 'NONE', #628, #3232, #1044 ) ; +#4675 = ADVANCED_FACE ( 'NONE', ( #3264 ), #1917, .T. ) ; +#4676 = LINE ( 'NONE', #2464, #1896 ) ; +#4677 = CARTESIAN_POINT ( 'NONE', ( 15.45457983136330800, -11.62830586281136100, -3.812761523745974200 ) ) ; +#4678 = CARTESIAN_POINT ( 'NONE', ( 12.49999999999999600, 2.499997531949971200, -7.834640608427718300 ) ) ; +#4679 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2990, #353, #1186, #3705, #1603, #4068, #1962, #4420, #2308, #4746 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 4 ), + ( 0.0000000000000000000, 0.001175954037626633500, 0.002351908075253266900, 0.003527862112879900400, 0.004703816150506533900 ), + .UNSPECIFIED. ) ; +#4680 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, 1.156482317317871500E-016 ) ) ; +#4681 = CARTESIAN_POINT ( 'NONE', ( 14.19190010754266300, 3.796410373064220200, 12.34010001015362000 ) ) ; +#4682 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4683 = CARTESIAN_POINT ( 'NONE', ( 13.44622222222222500, 24.99999753194998300, 69.35280431832386200 ) ) ; +#4684 = VECTOR ( 'NONE', #2003, 1000.000000000000000 ) ; +#4685 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#4686 = EDGE_LOOP ( 'NONE', ( #154, #165, #178, #218, #249, #280, #285, #301, #312, #350 ) ) ; +#4687 = CARTESIAN_POINT ( 'NONE', ( -0.04302223933593446500, -10.76514626871027300, 10.33422891436502200 ) ) ; +#4688 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, -14.13176217742977400, -10.17982295743313700 ) ) ; +#4689 = EDGE_CURVE ( 'NONE', #2750, #236, #2387, .T. ) ; +#4690 = LINE ( 'NONE', #2871, #3660 ) ; +#4691 = ORIENTED_EDGE ( 'NONE', *, *, #4070, .F. ) ; +#4692 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 24.99999753194998000, 60.10161676643944900 ) ) ; +#4693 = DIRECTION ( 'NONE', ( -4.336808689942021700E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#4694 = CARTESIAN_POINT ( 'NONE', ( 22.50000000000000400, 12.49999753194997300, 15.00001676643945100 ) ) ; +#4695 = CARTESIAN_POINT ( 'NONE', ( 15.80393526473460300, 5.260550311863148900, 11.69608150170599200 ) ) ; +#4696 = VERTEX_POINT ( 'NONE', #983 ) ; +#4697 = AXIS2_PLACEMENT_3D ( 'NONE', #2507, #186, #2863 ) ; +#4698 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.81553106438264000, 65.73015992760137700 ) ) ; +#4699 = CARTESIAN_POINT ( 'NONE', ( 15.03431383368676100, 3.102262623439512500, -12.80032677474095600 ) ) ; +#4700 = CARTESIAN_POINT ( 'NONE', ( 13.18048880838819600, 23.24862087218296800, 69.41436498010030200 ) ) ; +#4701 = VERTEX_POINT ( 'NONE', #1478 ) ; +#4702 = VERTEX_POINT ( 'NONE', #3960 ) ; +#4703 = AXIS2_PLACEMENT_3D ( 'NONE', #598, #3291, #620 ) ; +#4704 = CARTESIAN_POINT ( 'NONE', ( 12.96369165760234100, 7.647677776940378500, -7.798288269848678800 ) ) ; +#4705 = ORIENTED_EDGE ( 'NONE', *, *, #2471, .T. ) ; +#4706 = ORIENTED_EDGE ( 'NONE', *, *, #1687, .T. ) ; +#4707 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #2158, #1012, #3930, #1824 ), + .UNSPECIFIED., .F., .F., + ( 4, 4 ), + ( 0.0000000000000000000, 0.0009772193614486471500 ), + .UNSPECIFIED. ) ; +#4708 = ORIENTED_EDGE ( 'NONE', *, *, #2412, .F. ) ; +#4709 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#4710 = ORIENTED_EDGE ( 'NONE', *, *, #3897, .T. ) ; +#4711 = AXIS2_PLACEMENT_3D ( 'NONE', #2083, #4537, #2429 ) ; +#4712 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000400, -8.921444227227368600, 16.37912118631231500 ) ) ; +#4713 = CARTESIAN_POINT ( 'NONE', ( 18.69126057669333100, 7.369860914665973300, 9.070504074406899900 ) ) ; +#4714 = CARTESIAN_POINT ( 'NONE', ( 1.752335125655947200E-014, 23.05800073673151800, 68.23610651843107200 ) ) ; +#4715 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999998200, 20.55293979002667400, 65.00001676643944400 ) ) ; +#4716 = VERTEX_POINT ( 'NONE', #3229 ) ; +#4717 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 24.07016741668516600, 65.63474625491653600 ) ) ; +#4718 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4719 = VECTOR ( 'NONE', #1234, 1000.000000000000000 ) ; +#4720 = EDGE_CURVE ( 'NONE', #3913, #3364, #3687, .T. ) ; +#4721 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 24.81007565987724200, 65.73015992574733000 ) ) ; +#4722 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000004400, -20.19331522417383000, 24.10673685848191600 ) ) ; +#4723 = LINE ( 'NONE', #2661, #1028 ) ; +#4724 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 7.499997531949971700, -4.999983233560542800 ) ) ; +#4725 = CARTESIAN_POINT ( 'NONE', ( 3.157383461685384900, 21.35471160441701200, 69.76164131855010500 ) ) ; +#4726 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#4727 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000900, 2.499997531949970300, 2.891202939038461700E-016 ) ) ; +#4728 = APPROVAL ( #3317, 'UNSPECIFIED' ) ; +#4729 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -15.49639287651101900, 25.82106484927767200 ) ) ; +#4730 = AXIS2_PLACEMENT_3D ( 'NONE', #4504, #2394, #2749 ) ; +#4731 = CARTESIAN_POINT ( 'NONE', ( 11.84261653831947400, 21.35471160441732900, 69.76164131854858400 ) ) ; +#4732 =( BOUNDED_SURFACE ( ) B_SPLINE_SURFACE ( 3, 2, ( + ( #2234, #3295, #4359 ), + ( #2250, #4687, #2599 ), + ( #303, #2948, #715 ), + ( #3320, #1131, #90 ), + ( #1737, #1489, #3975 ), + ( #1866, #4323, #2223 ), + ( #4658, #2560, #255 ), + ( #2915, #673, #3276 ), + ( #1091, #3630, #1501 ), + ( #3988, #1884, #4337 ) ), + .UNSPECIFIED., .F., .F., .T. ) + B_SPLINE_SURFACE_WITH_KNOTS ( ( 4, 2, 2, 2, 4 ), + ( 3, 3 ), + ( 0.0000000000000000000, 0.001006924335491051400, 0.002013848670982102700, 0.003020773006473154100, 0.004027697341964205400 ), + ( 0.0000000000000000000, 1.000000000000000000 ), + .UNSPECIFIED. ) + GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_SURFACE ( ( + ( 1.000000000000000000, 0.7071067811865475700, 1.000000000000000000), + ( 1.000000000000000000, 0.6922098495212217800, 1.000000000000000000), + ( 1.000000000000000000, 0.6751335204219671700, 1.000000000000000000), + ( 1.000000000000000000, 0.6388015147206606000, 1.000000000000000000), + ( 1.000000000000000000, 0.6195171704664024200, 1.000000000000000000), + ( 1.000000000000000000, 0.5812718197955693000, 1.000000000000000000), + ( 1.000000000000000000, 0.5628072846215829200, 1.000000000000000000), + ( 1.000000000000000000, 0.5305429423446531600, 1.000000000000000000), + ( 1.000000000000000000, 0.5167300765072251300, 1.000000000000000000), + ( 1.000000000000000000, 0.5071401350274411500, 1.000000000000000000) ) ) + REPRESENTATION_ITEM ( '' ) SURFACE ( ) ); +#4733 = CARTESIAN_POINT ( 'NONE', ( 14.00000000000000000, 2.326349354283042500, -12.93285301449088500 ) ) ; +#4734 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.1736481776669296100, -0.9848077530122082400 ) ) ; +#4735 = AXIS2_PLACEMENT_3D ( 'NONE', #75, #2764, #492 ) ; +#4736 = CARTESIAN_POINT ( 'NONE', ( 13.49999999999999800, 8.385741033500860200, -8.999983233560547200 ) ) ; +#4737 = ORIENTED_EDGE ( 'NONE', *, *, #1600, .F. ) ; +#4738 = CARTESIAN_POINT ( 'NONE', ( 39.90238023923327400, 12.49999753194997100, 16.35728015991814700 ) ) ; +#4739 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -1.559374635020935700E-016 ) ) ; +#4740 = CARTESIAN_POINT ( 'NONE', ( 10.35539441862941200, 20.14674148369008200, 70.00001676643945800 ) ) ; +#4741 = FACE_OUTER_BOUND ( 'NONE', #1940, .T. ) ; +#4742 = ORIENTED_EDGE ( 'NONE', *, *, #270, .F. ) ; +#4743 = CARTESIAN_POINT ( 'NONE', ( 12.31000278554974500, -11.63176217742977400, -3.277205641478954800 ) ) ; +#4744 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 20.55293979002668100, 69.12739377865760600 ) ) ; +#4745 = ORIENTED_EDGE ( 'NONE', *, *, #4540, .T. ) ; +#4746 = CARTESIAN_POINT ( 'NONE', ( 12.60160000000000100, 24.99999753194998300, 68.99053987906626200 ) ) ; +#4747 = EDGE_CURVE ( 'NONE', #223, #4124, #1468, .T. ) ; +#4748 = VERTEX_POINT ( 'NONE', #3979 ) ; +#4749 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 6.968492461283258200, -37.49998323356054900 ) ) ; +#4750 = AXIS2_PLACEMENT_3D ( 'NONE', #859, #2043, #3807 ) ; +#4751 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.337451350268914000E-032, 1.156482317317871500E-016 ) ) ; +#4752 = EDGE_LOOP ( 'NONE', ( #2873, #2897, #2908, #2919 ) ) ; +#4753 = AXIS2_PLACEMENT_3D ( 'NONE', #130, #548, #1379 ) ; +#4754 = ORIENTED_EDGE ( 'NONE', *, *, #3873, .T. ) ; +#4755 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#4756 = ORIENTED_EDGE ( 'NONE', *, *, #1513, .F. ) ; +#4757 = DIRECTION ( 'NONE', ( -0.7835250082638060000, -0.6001212954384634900, 0.1610682842351750000 ) ) ; +#4758 = VERTEX_POINT ( 'NONE', #2226 ) ; +#4759 = AXIS2_PLACEMENT_3D ( 'NONE', #3163, #966, #3528 ) ; +#4760 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 4.999997531949977900, -14.99998323356054700 ) ) ; +#4761 = ORIENTED_EDGE ( 'NONE', *, *, #3331, .F. ) ; +#4762 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, -11.63176217742977400, -1.446751736521832800E-015 ) ) ; +#4763 = EDGE_LOOP ( 'NONE', ( #4305, #4312, #4317, #4342 ) ) ; +#4764 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#4765 = CARTESIAN_POINT ( 'NONE', ( 1.503849001830025000, 7.499997531949971700, -7.843247238070205200 ) ) ; +#4766 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#4767 = DIRECTION ( 'NONE', ( 9.887681187902443700E-016, 0.8216543946741296000, -0.5699860136114655000 ) ) ; +#4768 = TOROIDAL_SURFACE ( 'NONE', #2011, 5.601600000000002100, 0.5000000000000000000 ) ; +#4769 = CARTESIAN_POINT ( 'NONE', ( 14.00533307583896600, -12.12800691064680200, -10.77624551656416300 ) ) ; +#4770 = EDGE_CURVE ( 'NONE', #499, #634, #4516, .T. ) ; +#4771 = CARTESIAN_POINT ( 'NONE', ( 1.079242958133472400, -12.23751421496109700, -10.47900969051896100 ) ) ; +#4772 = CARTESIAN_POINT ( 'NONE', ( 15.00000000000000000, 2.499997531949971700, -13.91766076750309400 ) ) ; +#4773 = CARTESIAN_POINT ( 'NONE', ( 14.50000000000000200, 9.099997531949975700, -1.809983233560547900 ) ) ; +#4774 = EDGE_LOOP ( 'NONE', ( #3542, #3562, #3570, #3589, #3595 ) ) ; +#4775 = CIRCLE ( 'NONE', #1622, 1.000000000000000000 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Guide.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Guide.step new file mode 100644 index 0000000..5bbc07a --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Guide.step @@ -0,0 +1,1552 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger_Guide.STEP', + '2013-11-14T05:08:26', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = DATE_TIME_ROLE ( 'creation_date' ) ; +#2 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#4 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 2.023996660800371200, 12.08513584526882300 ) ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( -4.196296490048886200, -2.622414004699313100E-015, 2.307118822917861000 ) ) ; +#6 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#7 = ORIENTED_EDGE ( 'NONE', *, *, #949, .T. ) ; +#8 = EDGE_CURVE ( 'NONE', #445, #695, #1452, .T. ) ; +#9 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#10 = EDGE_CURVE ( 'NONE', #547, #889, #1440, .T. ) ; +#11 = ORIENTED_EDGE ( 'NONE', *, *, #1238, .F. ) ; +#12 = EDGE_LOOP ( 'NONE', ( #1137, #501, #718, #1122, #1431, #1496, #341, #1515, #134, #1145, #945, #297, #1138, #1337 ) ) ; +#13 = ORIENTED_EDGE ( 'NONE', *, *, #932, .T. ) ; +#14 = EDGE_CURVE ( 'NONE', #1261, #310, #1457, .T. ) ; +#15 = EDGE_LOOP ( 'NONE', ( #214, #124, #1074, #1252 ) ) ; +#16 = ORIENTED_EDGE ( 'NONE', *, *, #1135, .T. ) ; +#17 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#18 = APPROVAL_DATE_TIME ( #20, #453 ) ; +#19 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#20 = DATE_AND_TIME ( #21, #23 ) ; +#21 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#22 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#23 = LOCAL_TIME ( 15, 8, 26.00000000000000000, #28 ) ; +#24 = EDGE_CURVE ( 'NONE', #1157, #212, #1438, .T. ) ; +#25 = ORIENTED_EDGE ( 'NONE', *, *, #14, .F. ) ; +#26 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#27 = EDGE_LOOP ( 'NONE', ( #638, #458, #1283, #1363, #1093, #11 ) ) ; +#28 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#29 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -6.500000000000000900, 0.0000000000000000000 ) ) ; +#31 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#32 = ORIENTED_EDGE ( 'NONE', *, *, #940, .T. ) ; +#33 = APPROVAL_PERSON_ORGANIZATION ( #35, #453, #1325 ) ; +#34 = ORIENTED_EDGE ( 'NONE', *, *, #1006, .F. ) ; +#35 = PERSON_AND_ORGANIZATION ( #423, #157 ) ; +#36 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#37 = DATE_AND_TIME ( #52, #54 ) ; +#38 = ORIENTED_EDGE ( 'NONE', *, *, #1035, .F. ) ; +#39 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#40 = ORIENTED_EDGE ( 'NONE', *, *, #1062, .T. ) ; +#41 = ORIENTED_EDGE ( 'NONE', *, *, #392, .T. ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( -7.309769106156710300, -0.2166612242019420000, 1.475305546520775400 ) ) ; +#43 = ADVANCED_FACE ( 'NONE', ( #1424 ), #1406, .F. ) ; +#44 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 1.249999999999998900, 11.66689449165796300 ) ) ; +#45 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#46 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#47 = EDGE_LOOP ( 'NONE', ( #776, #259, #82, #542 ) ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( 10.36204774240376400, -0.08721262317449092500, 1.826775108232270500 ) ) ; +#49 = EDGE_LOOP ( 'NONE', ( #1045, #199, #728, #816 ) ) ; +#50 = DESIGN_CONTEXT ( 'detailed design', #418, 'design' ) ; +#51 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#52 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#53 = PLANE ( 'NONE', #771 ) ; +#54 = LOCAL_TIME ( 15, 8, 26.00000000000000000, #55 ) ; +#55 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#56 = PERSON_AND_ORGANIZATION ( #423, #157 ) ; +#57 = ORIENTED_EDGE ( 'NONE', *, *, #1022, .T. ) ; +#58 = ORIENTED_EDGE ( 'NONE', *, *, #926, .T. ) ; +#59 = VERTEX_POINT ( 'NONE', #278 ) ; +#60 = ADVANCED_FACE ( 'NONE', ( #1422 ), #269, .T. ) ; +#61 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.999999999999999100, 6.250000000000071100 ) ) ; +#62 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#63 = PERSON_AND_ORGANIZATION ( #423, #157 ) ; +#64 = PERSON_AND_ORGANIZATION ( #423, #157 ) ; +#65 = APPROVAL_DATE_TIME ( #67, #475 ) ; +#66 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.289101893839307700E-017, 0.0000000000000000000 ) ) ; +#67 = DATE_AND_TIME ( #85, #88 ) ; +#68 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.5951532544552892200, 0.0000000000000000000 ) ) ; +#69 = ORIENTED_EDGE ( 'NONE', *, *, #1099, .F. ) ; +#70 = ORIENTED_EDGE ( 'NONE', *, *, #967, .T. ) ; +#71 = EDGE_CURVE ( 'NONE', #434, #952, #1446, .T. ) ; +#72 = ORIENTED_EDGE ( 'NONE', *, *, #1179, .F. ) ; +#73 = EDGE_CURVE ( 'NONE', #889, #921, #1405, .T. ) ; +#74 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -6.500000000000000900, 0.0000000000000000000 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -2.821742127331540700E-015, 7.500000000000000000 ) ) ; +#76 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#77 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#78 = VERTEX_POINT ( 'NONE', #676 ) ; +#79 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.2873478855663427200, -0.9578262852211522100 ) ) ; +#80 = DIRECTION ( 'NONE', ( 1.289101893839307700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 7.311677065672661500, -0.1306994163797586500, 5.806146559011022400 ) ) ; +#82 = ORIENTED_EDGE ( 'NONE', *, *, #1222, .F. ) ; +#83 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -8.056886836495674800E-017, 3.750000000000000000 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#85 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#86 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -2.500000000000002700, 0.0000000000000000000 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 10.66688971922209100, -0.02249373289760674800, 5.369504951707198400 ) ) ; +#88 = LOCAL_TIME ( 15, 8, 26.00000000000000000, #91 ) ; +#89 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#90 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839308700E-017, 0.0000000000000000000 ) ) ; +#91 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#92 = DIRECTION ( 'NONE', ( 2.674581972639835600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( -7.688322934327341200, -0.1306994163797602900, 5.806146559011020600 ) ) ; +#94 = ORIENTED_EDGE ( 'NONE', *, *, #1163, .F. ) ; +#95 = ORIENTED_EDGE ( 'NONE', *, *, #1233, .F. ) ; +#96 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 4.193978171650472000, 3.563260572168286200 ) ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -2.500000000000000400, 7.500000000000000000 ) ) ; +#98 = VERTEX_POINT ( 'NONE', #74 ) ; +#99 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#100 = VERTEX_POINT ( 'NONE', #801 ) ; +#101 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#103 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839307700E-017, -0.0000000000000000000 ) ) ; +#104 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#105 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 1.249999999999998900, 12.50000000000000000 ) ) ; +#106 = APPROVAL_PERSON_ORGANIZATION ( #109, #475, #107 ) ; +#107 = APPROVAL_ROLE ( '' ) ; +#108 = CARTESIAN_POINT ( 'NONE', ( -7.450000000000000200, -2.000000000000000000, 3.750000000000000000 ) ) ; +#109 = PERSON_AND_ORGANIZATION ( #423, #157 ) ; +#110 = EDGE_CURVE ( 'NONE', #713, #1263, #1387, .T. ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -5.000000000000000900, 7.500000000000000000 ) ) ; +#112 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839307700E-017, 0.0000000000000000000 ) ) ; +#113 = DATE_AND_TIME ( #114, #125 ) ; +#114 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( -4.811677065672658800, -0.1306994163797605100, 1.693853440988978100 ) ) ; +#116 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#117 = ORIENTED_EDGE ( 'NONE', *, *, #428, .F. ) ; +#118 = VERTEX_POINT ( 'NONE', #44 ) ; +#119 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -2.500000000000000400, 7.500000000000000000 ) ) ; +#120 = VERTEX_POINT ( 'NONE', #304 ) ; +#121 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.2873478855663427200, 0.9578262852211522100 ) ) ; +#122 = VERTEX_POINT ( 'NONE', #853 ) ; +#123 = EDGE_CURVE ( 'NONE', #460, #1435, #1388, .T. ) ; +#124 = ORIENTED_EDGE ( 'NONE', *, *, #1110, .F. ) ; +#125 = LOCAL_TIME ( 15, 8, 26.00000000000000000, #126 ) ; +#126 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#127 = PERSON_AND_ORGANIZATION ( #423, #157 ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( -7.858566746734780400, -0.08805263603556672000, 1.823922248308089700 ) ) ; +#129 = APPROVAL_DATE_TIME ( #138, #497 ) ; +#130 = EDGE_CURVE ( 'NONE', #310, #434, #1423, .T. ) ; +#131 = ORIENTED_EDGE ( 'NONE', *, *, #1146, .F. ) ; +#132 = ORIENTED_EDGE ( 'NONE', *, *, #680, .T. ) ; +#133 = VERTEX_POINT ( 'NONE', #990 ) ; +#134 = ORIENTED_EDGE ( 'NONE', *, *, #1186, .T. ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -2.000000000000000000, 7.500000000000000000 ) ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.073161478902410000, 9.339461736991921700 ) ) ; +#137 = VERTEX_POINT ( 'NONE', #1369 ) ; +#138 = DATE_AND_TIME ( #139, #140 ) ; +#139 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#140 = LOCAL_TIME ( 15, 8, 26.00000000000000000, #142 ) ; +#141 = DIRECTION ( 'NONE', ( 1.289101893839307700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#142 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#143 = VERTEX_POINT ( 'NONE', #1459 ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( -4.813182560062281300, -0.1310893946886564900, 5.807401530898663300 ) ) ; +#145 = ORIENTED_EDGE ( 'NONE', *, *, #1208, .T. ) ; +#146 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1358, #322, #734, #48, #860, #158, #996, #245, #1136, #359, #1267, #484, #216, #1094, #325, #1231, #446, #1342, #574, #1443 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 2.074052530849660300E-020, 0.0006566826780645998100, 0.001313365356129199600, 0.001970048034193799600, 0.002298389373226096800, 0.002626730712258394500, 0.003283413390322989900, 0.003940096068387585200, 0.004596778746452179700, 0.005253461424516775100 ), + .UNSPECIFIED. ) ; +#147 = EDGE_LOOP ( 'NONE', ( #280, #944, #994, #132 ) ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -4.642997865484646500E-016, 4.999999999999999100 ) ) ; +#149 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#150 = ADVANCED_FACE ( 'NONE', ( #1372 ), #231, .F. ) ; +#151 = VERTEX_POINT ( 'NONE', #148 ) ; +#152 = APPROVAL_PERSON_ORGANIZATION ( #154, #497, #1425 ) ; +#153 = PLANE ( 'NONE', #750 ) ; +#154 = PERSON_AND_ORGANIZATION ( #423, #157 ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -2.500000000000000400, 0.0000000000000000000 ) ) ; +#156 = PERSON_AND_ORGANIZATION ( #423, #157 ) ; +#157 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#158 = CARTESIAN_POINT ( 'NONE', ( 9.814942395347241400, -0.2155345818696501000, 1.477906421351229400 ) ) ; +#159 = ADVANCED_FACE ( 'NONE', ( #1366 ), #1356, .T. ) ; +#160 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 1.749999999999999100, 11.66689449165796300 ) ) ; +#161 = ORIENTED_EDGE ( 'NONE', *, *, #1233, .T. ) ; +#162 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -2.000000000000000000, 4.839724735885175400 ) ) ; +#163 = EDGE_LOOP ( 'NONE', ( #843, #201, #403 ) ) ; +#164 = EDGE_LOOP ( 'NONE', ( #667, #1226, #1512, #605, #95, #258 ) ) ; +#165 = PLANE ( 'NONE', #784 ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -6.500000000000000900, 3.749999999999998200 ) ) ; +#167 = EDGE_LOOP ( 'NONE', ( #224, #441, #1078, #635, #617, #1262, #583, #1399, #185, #247, #346, #839, #57, #1007 ) ) ; +#168 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#169 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.674581972639835600E-016, 0.0000000000000000000 ) ) ; +#170 = SHAPE_DEFINITION_REPRESENTATION ( #876, #1065 ) ; +#171 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.000000000000000000, 7.500000000000000000 ) ) ; +#172 = ORIENTED_EDGE ( 'NONE', *, *, #1146, .T. ) ; +#173 = ORIENTED_EDGE ( 'NONE', *, *, #130, .F. ) ; +#174 = EDGE_LOOP ( 'NONE', ( #742, #859, #747 ) ) ; +#175 = EDGE_CURVE ( 'NONE', #838, #688, #504, .T. ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 1.249999999999998900, 12.50000000000000000 ) ) ; +#177 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -5.000000000000000900, 7.500000000000000000 ) ) ; +#179 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#180 = EDGE_CURVE ( 'NONE', #1114, #193, #973, .T. ) ; +#181 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -2.500000000000001800, 0.0000000000000000000 ) ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.568978171650467600, 7.686739427831713400 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 7.888473706830765800, -0.2574581628343405300, 6.106834916279375100 ) ) ; +#184 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839308700E-017, 0.0000000000000000000 ) ) ; +#185 = ORIENTED_EDGE ( 'NONE', *, *, #1012, .T. ) ; +#186 = EDGE_LOOP ( 'NONE', ( #1479, #13 ) ) ; +#187 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#188 = EDGE_LOOP ( 'NONE', ( #1048, #1333 ) ) ; +#189 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 10.91506350946110100, 6.918603989134382700E-016, 4.999999999999999100 ) ) ; +#191 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( -7.111526293169242200, -0.2574581628343418100, 6.106834916279375100 ) ) ; +#193 = VERTEX_POINT ( 'NONE', #465 ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#196 = CYLINDRICAL_SURFACE ( 'NONE', #517, 2.500000000000000400 ) ; +#197 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#198 = ORIENTED_EDGE ( 'NONE', *, *, #1097, .T. ) ; +#199 = ORIENTED_EDGE ( 'NONE', *, *, #1169, .F. ) ; +#200 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#201 = ORIENTED_EDGE ( 'NONE', *, *, #1083, .T. ) ; +#202 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#203 = PLANE ( 'NONE', #861 ) ; +#204 = ORIENTED_EDGE ( 'NONE', *, *, #1050, .F. ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 4.073161478902410000, 9.339461736991921700 ) ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 1.749999999999999100, 11.66689449165796300 ) ) ; +#207 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#208 = ORIENTED_EDGE ( 'NONE', *, *, #1118, .T. ) ; +#209 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -2.500000000000001800, 2.500000000000000400 ) ) ; +#210 = CYLINDRICAL_SURFACE ( 'NONE', #531, 4.999999999999999100 ) ; +#211 = EDGE_CURVE ( 'NONE', #848, #1410, #146, .T. ) ; +#212 = VERTEX_POINT ( 'NONE', #19 ) ; +#213 = ORIENTED_EDGE ( 'NONE', *, *, #976, .F. ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #1015, .F. ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( -8.303749539836719200, -2.481712420683182500E-015, 2.307198549018398800 ) ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( 8.314210753501269500, -0.3177888005479391800, 1.278484925536047300 ) ) ; +#217 = CARTESIAN_POINT ( 'NONE', ( -0.0000000000000000000, -0.5951532544552892200, 5.000000000000000000 ) ) ; +#218 = ORIENTED_EDGE ( 'NONE', *, *, #1054, .T. ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -6.500000000000001800, 7.500000000000000000 ) ) ; +#220 = FACE_OUTER_BOUND ( 'NONE', #963, .T. ) ; +#221 = CYLINDRICAL_SURFACE ( 'NONE', #540, 4.999999999999999100 ) ; +#222 = EDGE_CURVE ( 'NONE', #372, #800, #1389, .T. ) ; +#223 = FACE_OUTER_BOUND ( 'NONE', #1411, .T. ) ; +#224 = ORIENTED_EDGE ( 'NONE', *, *, #981, .T. ) ; +#225 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#226 = ORIENTED_EDGE ( 'NONE', *, *, #324, .T. ) ; +#227 = ORIENTED_EDGE ( 'NONE', *, *, #1066, .T. ) ; +#228 = CARTESIAN_POINT ( 'NONE', ( -4.333110280777909800, -0.02249373289760816400, 5.369504951707200200 ) ) ; +#229 = VERTEX_POINT ( 'NONE', #1253 ) ; +#230 = CYLINDRICAL_SURFACE ( 'NONE', #550, 2.500000000000000000 ) ; +#231 = PLANE ( 'NONE', #886 ) ; +#232 = ORIENTED_EDGE ( 'NONE', *, *, #936, .F. ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( -5.185057604652763900, -0.2155345818696510200, 1.477906421351231000 ) ) ; +#234 = ADVANCED_FACE ( 'NONE', ( #1373 ), #1352, .T. ) ; +#235 = FACE_OUTER_BOUND ( 'NONE', #569, .T. ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#237 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#238 = FACE_OUTER_BOUND ( 'NONE', #1488, .T. ) ; +#239 = CYLINDRICAL_SURFACE ( 'NONE', #559, 1.199999999999999700 ) ; +#240 = ORIENTED_EDGE ( 'NONE', *, *, #932, .F. ) ; +#241 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#242 = VERTEX_POINT ( 'NONE', #108 ) ; +#243 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#244 = ADVANCED_FACE ( 'NONE', ( #1355 ), #929, .F. ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 9.297944159821980700, -0.3020295653258305800, 1.308385412924290900 ) ) ; +#246 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#247 = ORIENTED_EDGE ( 'NONE', *, *, #1015, .T. ) ; +#248 = EDGE_CURVE ( 'NONE', #143, #100, #1404, .T. ) ; +#249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#250 = ADVANCED_FACE ( 'NONE', ( #1354 ), #203, .T. ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -2.500000000000002700, 2.500000000000000000 ) ) ; +#252 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#253 = FACE_OUTER_BOUND ( 'NONE', #1346, .T. ) ; +#254 = FACE_OUTER_BOUND ( 'NONE', #147, .T. ) ; +#255 = FACE_OUTER_BOUND ( 'NONE', #1178, .T. ) ; +#256 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#257 = FACE_OUTER_BOUND ( 'NONE', #1034, .T. ) ; +#258 = ORIENTED_EDGE ( 'NONE', *, *, #1075, .F. ) ; +#259 = ORIENTED_EDGE ( 'NONE', *, *, #71, .T. ) ; +#260 = CYLINDRICAL_SURFACE ( 'NONE', #571, 1.200000000000000600 ) ; +#261 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#262 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#264 = VERTEX_POINT ( 'NONE', #1331 ) ; +#265 = FACE_OUTER_BOUND ( 'NONE', #1469, .T. ) ; +#266 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.826024711554534200E-016, 0.0000000000000000000 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 1.249999999999998900, 12.50000000000000000 ) ) ; +#268 = FACE_BOUND ( 'NONE', #757, .T. ) ; +#269 = PLANE ( 'NONE', #903 ) ; +#270 = FACE_OUTER_BOUND ( 'NONE', #164, .T. ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -4.642970389728855600E-016, 4.999999999999999100 ) ) ; +#272 = FACE_OUTER_BOUND ( 'NONE', #1492, .T. ) ; +#273 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .F. ) ; +#274 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#275 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 1.749999999999999100, 11.66689449165796300 ) ) ; +#276 = CARTESIAN_POINT ( 'NONE', ( 3.222754734598273500E-017, -2.500000000000002700, 4.999999999999999100 ) ) ; +#277 = ORIENTED_EDGE ( 'NONE', *, *, #180, .T. ) ; +#278 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -5.000000000000000900, 7.500000000000000000 ) ) ; +#279 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, 1.127964157109394800E-016, 3.749999999999998200 ) ) ; +#280 = ORIENTED_EDGE ( 'NONE', *, *, #951, .F. ) ; +#281 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -4.642997865484646500E-016, 7.500000000000000000 ) ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -1.099510257474846300E-015, 2.500000000000000400 ) ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( 8.308623960892788300, -0.3140253381801239000, 6.213175910600277500 ) ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 3.575196231792993000E-032, -2.773400806312566600E-015, 4.999999999999999100 ) ) ; +#285 = VERTEX_POINT ( 'NONE', #205 ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#287 = FACE_OUTER_BOUND ( 'NONE', #722, .T. ) ; +#288 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( -6.691376039107217900, -0.3140253381801255100, 6.213175910600280200 ) ) ; +#290 = VECTOR ( 'NONE', #261, 1000.000000000000000 ) ; +#291 = FACE_OUTER_BOUND ( 'NONE', #1462, .T. ) ; +#292 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#293 = VECTOR ( 'NONE', #875, 1000.000000000000000 ) ; +#294 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -1.099510257474846300E-015, 4.999999999999999100 ) ) ; +#295 = VERTEX_POINT ( 'NONE', #432 ) ; +#296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#297 = ORIENTED_EDGE ( 'NONE', *, *, #1194, .T. ) ; +#298 = LINE ( 'NONE', #171, #290 ) ; +#299 = MECHANICAL_CONTEXT ( 'NONE', #923, 'mechanical' ) ; +#300 = ADVANCED_FACE ( 'NONE', ( #1341 ), #560, .F. ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( -4.084936490538901800, -5.265899366166994800E-017, 2.500000000000000000 ) ) ; +#302 = VERTEX_POINT ( 'NONE', #1215 ) ; +#303 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.882975897653517600E-015, 4.999999999999999100 ) ) ; +#305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9578262852211522100, -0.2873478855663427200 ) ) ; +#306 = EDGE_CURVE ( 'NONE', #1216, #1157, #1339, .T. ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#308 = VECTOR ( 'NONE', #256, 1000.000000000000000 ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.500000000000002700, 2.500000000000000000 ) ) ; +#310 = VERTEX_POINT ( 'NONE', #1102 ) ; +#311 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839307700E-017, 0.0000000000000000000 ) ) ; +#312 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.864827736675066000E-014, 1.000000000000000000 ) ) ; +#313 = FACE_OUTER_BOUND ( 'NONE', #167, .T. ) ; +#314 = CYLINDRICAL_SURFACE ( 'NONE', #586, 2.500000000000000000 ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#316 = ORIENTED_EDGE ( 'NONE', *, *, #1152, .T. ) ; +#317 = EDGE_LOOP ( 'NONE', ( #931, #406, #1052, #909, #589, #1359, #619, #345, #1297, #856, #69, #1232, #873, #834 ) ) ; +#318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#319 = ORIENTED_EDGE ( 'NONE', *, *, #1083, .F. ) ; +#320 = ORIENTED_EDGE ( 'NONE', *, *, #922, .F. ) ; +#321 = ORIENTED_EDGE ( 'NONE', *, *, #1234, .T. ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 10.80370350995111700, -5.183841637196318100E-016, 2.307118822917861400 ) ) ; +#323 = LINE ( 'NONE', #749, #293 ) ; +#324 = EDGE_CURVE ( 'NONE', #285, #1207, #1330, .T. ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( 7.690230893843293300, -0.2166612242019415000, 1.475305546520774100 ) ) ; +#326 = VECTOR ( 'NONE', #1383, 1000.000000000000000 ) ; +#327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#328 = LINE ( 'NONE', #1147, #308 ) ; +#329 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#330 = LINE ( 'NONE', #495, #326 ) ; +#331 = EDGE_LOOP ( 'NONE', ( #442, #38, #72, #273, #1509, #1377 ) ) ; +#332 = ORIENTED_EDGE ( 'NONE', *, *, #1132, .T. ) ; +#333 = CIRCLE ( 'NONE', #591, 2.500000000000000400 ) ; +#334 = CARTESIAN_POINT ( 'NONE', ( 1.186916062510447600E-015, -6.500000000000002700, 0.0000000000000000000 ) ) ; +#335 = ADVANCED_FACE ( 'NONE', ( #1327, #1324 ), #965, .T. ) ; +#336 = CARTESIAN_POINT ( 'NONE', ( 7.550000000000001600, -6.500000000000000900, 3.749999999999998200 ) ) ; +#337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -4.642997865484646500E-016, 7.500000000000000000 ) ) ; +#339 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#340 = FACE_OUTER_BOUND ( 'NONE', #27, .T. ) ; +#341 = ORIENTED_EDGE ( 'NONE', *, *, #1037, .T. ) ; +#342 = VECTOR ( 'NONE', #527, 1000.000000000000000 ) ; +#343 = CIRCLE ( 'NONE', #592, 2.500000000000000400 ) ; +#344 = CARTESIAN_POINT ( 'NONE', ( -4.084936490538901800, -5.265899366166994200E-017, 4.999999999999999100 ) ) ; +#345 = ORIENTED_EDGE ( 'NONE', *, *, #222, .T. ) ; +#346 = ORIENTED_EDGE ( 'NONE', *, *, #748, .F. ) ; +#347 = DIRECTION ( 'NONE', ( 2.674581972639835600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#348 = ORIENTED_EDGE ( 'NONE', *, *, #986, .T. ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( -5.702055840178022800, -0.3020295653258305800, 1.308385412924292900 ) ) ; +#350 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#351 = ORIENTED_EDGE ( 'NONE', *, *, #71, .F. ) ; +#352 = ADVANCED_FACE ( 'NONE', ( #1309 ), #753, .T. ) ; +#353 = ORIENTED_EDGE ( 'NONE', *, *, #1012, .F. ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.749999999999999100, 12.16689449165796300 ) ) ; +#355 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -2.000000000000000000, 3.749999999999998200 ) ) ; +#356 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#357 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#358 = LINE ( 'NONE', #84, #342 ) ; +#359 = CARTESIAN_POINT ( 'NONE', ( 8.973797182424945600, -0.3304907490348005800, 1.257618970623039200 ) ) ; +#360 = VECTOR ( 'NONE', #901, 1000.000000000000000 ) ; +#361 = CARTESIAN_POINT ( 'NONE', ( 6.696296490048890600, -1.665690290775581600E-015, 5.192881177082138100 ) ) ; +#362 = LINE ( 'NONE', #1298, #360 ) ; +#363 = EDGE_LOOP ( 'NONE', ( #1100, #213, #1228 ) ) ; +#364 = ORIENTED_EDGE ( 'NONE', *, *, #748, .T. ) ; +#365 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#366 = ORIENTED_EDGE ( 'NONE', *, *, #1220, .T. ) ; +#367 = VECTOR ( 'NONE', #79, 1000.000000000000200 ) ; +#368 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.568978171650466700, 7.686739427831714300 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 9.110528091593927500E-031, -3.406337208876704400E-015, 7.500000000000000000 ) ) ; +#370 = LINE ( 'NONE', #893, #367 ) ; +#371 = ADVANCED_FACE ( 'NONE', ( #1292, #1340 ), #1508, .F. ) ; +#372 = VERTEX_POINT ( 'NONE', #101 ) ; +#373 = CIRCLE ( 'NONE', #602, 4.999999999999999100 ) ; +#374 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#375 = PLANE ( 'NONE', #570 ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -2.500000000000000400, 7.500000000000000000 ) ) ; +#377 = CIRCLE ( 'NONE', #598, 2.500000000000000000 ) ; +#378 = EDGE_LOOP ( 'NONE', ( #1294, #70, #665, #877, #1305, #650 ) ) ; +#379 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .F. ) ; +#380 = VERTEX_POINT ( 'NONE', #879 ) ; +#381 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#382 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#383 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.674581972639835600E-016, -0.0000000000000000000 ) ) ; +#384 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.674581972639835600E-016, -0.0000000000000000000 ) ) ; +#385 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.674581972639835600E-016, 0.0000000000000000000 ) ) ; +#386 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#387 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#388 = ORIENTED_EDGE ( 'NONE', *, *, #1217, .F. ) ; +#389 = EDGE_CURVE ( 'NONE', #1225, #725, #1289, .T. ) ; +#390 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.289101893839308700E-017, 0.0000000000000000000 ) ) ; +#391 = CIRCLE ( 'NONE', #601, 5.000000000000000000 ) ; +#392 = EDGE_CURVE ( 'NONE', #137, #120, #1312, .T. ) ; +#393 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -1.099510257474846300E-015, 7.500000000000000000 ) ) ; +#394 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#395 = CARTESIAN_POINT ( 'NONE', ( 6.584936490538902700, -4.662675674915599000E-016, 2.500000000000000400 ) ) ; +#396 = VECTOR ( 'NONE', #1396, 1000.000000000000000 ) ; +#397 = CARTESIAN_POINT ( 'NONE', ( 8.637911389899223000, -0.3348828897120926200, 6.249907160558510800 ) ) ; +#398 = CIRCLE ( 'NONE', #606, 4.999999999999999100 ) ; +#399 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.289101893839307700E-017, 0.0000000000000000000 ) ) ; +#400 = VECTOR ( 'NONE', #121, 1000.000000000000200 ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( 6.829497908315480500, -0.02182779442324191800, 5.365290569507362100 ) ) ; +#402 = VERTEX_POINT ( 'NONE', #1398 ) ; +#403 = ORIENTED_EDGE ( 'NONE', *, *, #1085, .T. ) ; +#404 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.289101893839307700E-017, 0.0000000000000000000 ) ) ; +#405 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#406 = ORIENTED_EDGE ( 'NONE', *, *, #14, .T. ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 1.749999999999999100, 12.16689449165796300 ) ) ; +#408 = ORIENTED_EDGE ( 'NONE', *, *, #1040, .F. ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( -6.362088610100781400, -0.3348828897120948400, 6.249907160558514400 ) ) ; +#410 = CARTESIAN_POINT ( 'NONE', ( 9.110528091593927500E-031, -3.406337208876704400E-015, 7.500000000000000000 ) ) ; +#411 = CARTESIAN_POINT ( 'NONE', ( -3.749999999999999100, -4.834132101897403800E-017, 3.750000000000000000 ) ) ; +#412 = VERTEX_POINT ( 'NONE', #515 ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( 6.686454931599598000E-016, -2.500000000000003600, 0.0000000000000000000 ) ) ; +#414 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#416 = EDGE_CURVE ( 'NONE', #1390, #947, #1274, .T. ) ; +#417 = CIRCLE ( 'NONE', #607, 0.5000000000000004400 ) ; +#418 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#419 = LINE ( 'NONE', #934, #400 ) ; +#420 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -5.000000000000000900, 7.500000000000000000 ) ) ; +#421 = VECTOR ( 'NONE', #565, 1000.000000000000000 ) ; +#422 = CIRCLE ( 'NONE', #610, 4.999999999999999100 ) ; +#423 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#424 = DIRECTION ( 'NONE', ( -2.674581972639835600E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#425 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#426 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#427 = ORIENTED_EDGE ( 'NONE', *, *, #1009, .F. ) ; +#428 = EDGE_CURVE ( 'NONE', #785, #695, #1287, .T. ) ; +#429 = VERTEX_POINT ( 'NONE', #1168 ) ; +#430 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#431 = EDGE_LOOP ( 'NONE', ( #1499, #1507, #40 ) ) ; +#432 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, 1.418012083223238500E-016, 4.839724735885175400 ) ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.999999999999999100, 6.250000000000071100 ) ) ; +#434 = VERTEX_POINT ( 'NONE', #640 ) ; +#435 = EDGE_CURVE ( 'NONE', #380, #302, #1255, .T. ) ; +#436 = VECTOR ( 'NONE', #1332, 1000.000000000000000 ) ; +#437 = LINE ( 'NONE', #433, #421 ) ; +#438 = LINE ( 'NONE', #267, #396 ) ; +#439 = CIRCLE ( 'NONE', #616, 2.500000000000000400 ) ; +#440 = ADVANCED_FACE ( 'NONE', ( #1259 ), #1241, .F. ) ; +#441 = ORIENTED_EDGE ( 'NONE', *, *, #986, .F. ) ; +#442 = ORIENTED_EDGE ( 'NONE', *, *, #971, .F. ) ; +#443 = CARTESIAN_POINT ( 'NONE', ( -8.415063509461099000, -2.881879549380810300E-015, 4.999999999999999100 ) ) ; +#444 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #1058 ) ) ; +#445 = VERTEX_POINT ( 'NONE', #588 ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( 7.141433253265223200, -0.08805263603556644200, 1.823922248308088600 ) ) ; +#447 = CC_DESIGN_SECURITY_CLASSIFICATION ( #463, ( #485 ) ) ; +#448 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -2.821742127331540700E-015, 2.500000000000000400 ) ) ; +#449 = ORIENTED_EDGE ( 'NONE', *, *, #1214, .F. ) ; +#450 = CC_DESIGN_APPROVAL ( #453, ( #463 ) ) ; +#451 = VECTOR ( 'NONE', #556, 1000.000000000000000 ) ; +#452 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#453 = APPROVAL ( #426, 'UNSPECIFIED' ) ; +#454 = CIRCLE ( 'NONE', #618, 2.500000000000000400 ) ; +#455 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #37, #1211, ( #463 ) ) ; +#456 = LINE ( 'NONE', #105, #451 ) ; +#457 = CIRCLE ( 'NONE', #623, 4.999999999999999100 ) ; +#458 = ORIENTED_EDGE ( 'NONE', *, *, #1085, .F. ) ; +#459 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -2.000000000000000000, 2.660275264114820200 ) ) ; +#460 = VERTEX_POINT ( 'NONE', #459 ) ; +#461 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #56, #303, ( #463 ) ) ; +#462 = VECTOR ( 'NONE', #798, 1000.000000000000000 ) ; +#463 = SECURITY_CLASSIFICATION ( '', '', #1068 ) ; +#464 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #63, #202, ( #485 ) ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( -4.084936490538901800, -5.265899366166994200E-017, 4.999999999999999100 ) ) ; +#466 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 4.193978171650472900, 3.563260572168286200 ) ) ; +#467 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #64, #927, ( #485 ) ) ; +#468 = CARTESIAN_POINT ( 'NONE', ( -6.026202817575058800, -0.3304907490348003600, 1.257618970623041000 ) ) ; +#469 = LINE ( 'NONE', #1351, #462 ) ; +#470 = CC_DESIGN_APPROVAL ( #475, ( #485 ) ) ; +#471 = CIRCLE ( 'NONE', #621, 0.5000000000000004400 ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( -7.450000000000000200, -6.501000000000001200, 3.750000000000000000 ) ) ; +#473 = ADVANCED_FACE ( 'NONE', ( #1276 ), #1237, .T. ) ; +#474 = VECTOR ( 'NONE', #141, 1000.000000000000000 ) ; +#475 = APPROVAL ( #799, 'UNSPECIFIED' ) ; +#476 = CIRCLE ( 'NONE', #625, 2.500000000000000400 ) ; +#477 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 8.056886836495674800E-017, 3.749999999999998200 ) ) ; +#478 = ORIENTED_EDGE ( 'NONE', *, *, #997, .T. ) ; +#479 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#480 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -2.000000000000000000, 3.749999999999998200 ) ) ; +#481 = VERTEX_POINT ( 'NONE', #336 ) ; +#482 = PLANE ( 'NONE', #794 ) ; +#483 = ORIENTED_EDGE ( 'NONE', *, *, #1163, .T. ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( 8.532093253746609200, -0.3350421788099792200, 1.249816942373717800 ) ) ; +#485 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #1058, .NOT_KNOWN. ) ; +#486 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#487 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#488 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #113, #1, ( #499 ) ) ; +#489 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #127, #675, ( #499 ) ) ; +#490 = ORIENTED_EDGE ( 'NONE', *, *, #1103, .T. ) ; +#491 = DIRECTION ( 'NONE', ( 1.289101893839307900E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#492 = CARTESIAN_POINT ( 'NONE', ( 6.686454931599597000E-016, -2.500000000000003600, 2.500000000000000400 ) ) ; +#493 = CC_DESIGN_APPROVAL ( #497, ( #499 ) ) ; +#494 = VECTOR ( 'NONE', #833, 1000.000000000000000 ) ; +#495 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.882974467288907900E-015, 2.500000000000000000 ) ) ; +#496 = LINE ( 'NONE', #942, #436 ) ; +#497 = APPROVAL ( #551, 'UNSPECIFIED' ) ; +#498 = LINE ( 'NONE', #338, #494 ) ; +#499 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #485, #50 ) ; +#500 = ORIENTED_EDGE ( 'NONE', *, *, #967, .F. ) ; +#501 = ORIENTED_EDGE ( 'NONE', *, *, #1169, .T. ) ; +#502 = ADVANCED_FACE ( 'NONE', ( #1311 ), #1224, .F. ) ; +#503 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.674581972639835600E-016, 0.0000000000000000000 ) ) ; +#504 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #301, #5, #682, #805, #115, #233, #1120, #349, #1258, #468, #1362, #596, #1464, #727, #42, #819, #128, #953, #215, #1091 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 8.130014832408460000E-021, 0.0006566826780645946100, 0.001313365356129189200, 0.001970048034193783500, 0.002298389373226081200, 0.002626730712258378400, 0.003283413390322975500, 0.003940096068387572200, 0.004596778746452169300, 0.005253461424516767300 ), + .UNSPECIFIED. ) ; +#505 = VECTOR ( 'NONE', #1449, 1000.000000000000000 ) ; +#506 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #156, #1203, ( #1058 ) ) ; +#507 = AXIS2_PLACEMENT_3D ( 'NONE', #1197, #197, #1059 ) ; +#508 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#509 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -2.000000000000000000, 3.749999999999998200 ) ) ; +#510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#511 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( -1.249999999999999800, -2.500000000000000400, 7.500000000000000000 ) ) ; +#513 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#514 = LINE ( 'NONE', #587, #474 ) ; +#515 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#516 = CIRCLE ( 'NONE', #642, 2.500000000000000400 ) ; +#517 = AXIS2_PLACEMENT_3D ( 'NONE', #1506, #99, #1415 ) ; +#518 = VECTOR ( 'NONE', #1348, 1000.000000000000000 ) ; +#519 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#520 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#521 = LINE ( 'NONE', #29, #505 ) ; +#522 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1434 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #917, #1420, #672 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#523 = EDGE_LOOP ( 'NONE', ( #1096, #1338 ) ) ; +#524 = AXIS2_PLACEMENT_3D ( 'NONE', #656, #1191, #664 ) ; +#525 = ORIENTED_EDGE ( 'NONE', *, *, #1230, .T. ) ; +#526 = EDGE_LOOP ( 'NONE', ( #691, #1029, #353, #950 ) ) ; +#527 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#528 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#529 = CARTESIAN_POINT ( 'NONE', ( 9.185789246498735800, -0.3177888005479367900, 6.221515074463948900 ) ) ; +#530 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 4.568978171650467600, 4.813260572168286600 ) ) ; +#531 = AXIS2_PLACEMENT_3D ( 'NONE', #1047, #288, #191 ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -2.000000000000000000, 3.749999999999998200 ) ) ; +#533 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 4.568978171650466700, 7.686739427831714300 ) ) ; +#534 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#535 = VERTEX_POINT ( 'NONE', #1451 ) ; +#536 = AXIS2_PLACEMENT_3D ( 'NONE', #782, #92, #910 ) ; +#537 = PLANE ( 'NONE', #524 ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( -5.814210753501269500, -0.3177888005479394000, 6.221515074463952500 ) ) ; +#539 = VECTOR ( 'NONE', #1218, 1000.000000000000000 ) ; +#540 = AXIS2_PLACEMENT_3D ( 'NONE', #769, #645, #520 ) ; +#541 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.674581972639835600E-016, 0.0000000000000000000 ) ) ; +#542 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ; +#543 = CIRCLE ( 'NONE', #633, 2.500000000000000400 ) ; +#544 = CYLINDRICAL_SURFACE ( 'NONE', #631, 1.200000000000000600 ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -8.056886836495674800E-017, 3.750000000000000000 ) ) ; +#546 = AXIS2_PLACEMENT_3D ( 'NONE', #1402, #387, #1498 ) ; +#547 = VERTEX_POINT ( 'NONE', #30 ) ; +#548 = ORIENTED_EDGE ( 'NONE', *, *, #1115, .T. ) ; +#549 = CARTESIAN_POINT ( 'NONE', ( -1.249999999999999800, -2.500000000000000400, 0.0000000000000000000 ) ) ; +#550 = AXIS2_PLACEMENT_3D ( 'NONE', #276, #1172, #1032 ) ; +#551 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#552 = ORIENTED_EDGE ( 'NONE', *, *, #1132, .F. ) ; +#553 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -2.000000000000000000, 3.750000000000000000 ) ) ; +#555 = CARTESIAN_POINT ( 'NONE', ( -7.862047742403758500, -0.08721262317449261800, 5.673224891767726600 ) ) ; +#556 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#557 = AXIS2_PLACEMENT_3D ( 'NONE', #1490, #1026, #179 ) ; +#558 = ORIENTED_EDGE ( 'NONE', *, *, #1037, .F. ) ; +#559 = AXIS2_PLACEMENT_3D ( 'NONE', #637, #513, #1397 ) ; +#560 = PLANE ( 'NONE', #855 ) ; +#561 = LINE ( 'NONE', #315, #539 ) ; +#562 = VERTEX_POINT ( 'NONE', #709 ) ; +#563 = VECTOR ( 'NONE', #1240, 1000.000000000000000 ) ; +#564 = LINE ( 'NONE', #334, #563 ) ; +#565 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.2873478855663426600, 0.9578262852211522100 ) ) ; +#566 = ORIENTED_EDGE ( 'NONE', *, *, #940, .F. ) ; +#567 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #1165, #382 ) ; +#568 = ORIENTED_EDGE ( 'NONE', *, *, #324, .F. ) ; +#569 = EDGE_LOOP ( 'NONE', ( #449, #797, #1491, #568 ) ) ; +#570 = AXIS2_PLACEMENT_3D ( 'NONE', #509, #763, #66 ) ; +#571 = AXIS2_PLACEMENT_3D ( 'NONE', #882, #262, #1484 ) ; +#572 = ORIENTED_EDGE ( 'NONE', *, *, #1227, .F. ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( -8.303703509951114700, -2.710505431213758300E-015, 5.192881177082137300 ) ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( 6.696250460163280800, -1.613597764519442300E-015, 2.307198549018400600 ) ) ; +#575 = LINE ( 'NONE', #135, #518 ) ; +#576 = AXIS2_PLACEMENT_3D ( 'NONE', #1014, #755, #62 ) ; +#577 = VECTOR ( 'NONE', #329, 1000.000000000000000 ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -6.501000000000001200, 3.749999999999998200 ) ) ; +#579 = CIRCLE ( 'NONE', #646, 1.199999999999999700 ) ; +#580 = LINE ( 'NONE', #219, #577 ) ; +#581 = ORIENTED_EDGE ( 'NONE', *, *, #1002, .F. ) ; +#582 = AXIS2_PLACEMENT_3D ( 'NONE', #369, #1282, #503 ) ; +#583 = ORIENTED_EDGE ( 'NONE', *, *, #1006, .T. ) ; +#584 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -2.500000000000001800, 7.500000000000000000 ) ) ; +#585 = VECTOR ( 'NONE', #17, 1000.000000000000000 ) ; +#586 = AXIS2_PLACEMENT_3D ( 'NONE', #1273, #745, #491 ) ; +#587 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -2.000000000000000000, 2.660275264114820200 ) ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -1.095736609763411700E-016, 2.660275264114828600 ) ) ; +#589 = ORIENTED_EDGE ( 'NONE', *, *, #1144, .F. ) ; +#590 = VECTOR ( 'NONE', #957, 1000.000000000000000 ) ; +#591 = AXIS2_PLACEMENT_3D ( 'NONE', #867, #168, #1011 ) ; +#592 = AXIS2_PLACEMENT_3D ( 'NONE', #1380, #612, #1474 ) ; +#593 = FACE_OUTER_BOUND ( 'NONE', #1467, .T. ) ; +#594 = VECTOR ( 'NONE', #207, 1000.000000000000000 ) ; +#595 = ORIENTED_EDGE ( 'NONE', *, *, #951, .T. ) ; +#596 = CARTESIAN_POINT ( 'NONE', ( -6.467906746253389900, -0.3350421788099791600, 1.249816942373720200 ) ) ; +#597 = ORIENTED_EDGE ( 'NONE', *, *, #1046, .F. ) ; +#598 = AXIS2_PLACEMENT_3D ( 'NONE', #251, #1142, #365 ) ; +#599 = ADVANCED_FACE ( 'NONE', ( #1239 ), #1221, .T. ) ; +#600 = VERTEX_POINT ( 'NONE', #448 ) ; +#601 = AXIS2_PLACEMENT_3D ( 'NONE', #907, #189, #1043 ) ; +#602 = AXIS2_PLACEMENT_3D ( 'NONE', #1181, #394, #1303 ) ; +#603 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#604 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#605 = ORIENTED_EDGE ( 'NONE', *, *, #995, .F. ) ; +#606 = AXIS2_PLACEMENT_3D ( 'NONE', #1401, #644, #1497 ) ; +#607 = AXIS2_PLACEMENT_3D ( 'NONE', #275, #1171, #386 ) ; +#608 = LINE ( 'NONE', #822, #590 ) ; +#609 = VECTOR ( 'NONE', #809, 1000.000000000000000 ) ; +#610 = AXIS2_PLACEMENT_3D ( 'NONE', #1164, #381, #1291 ) ; +#611 = LINE ( 'NONE', #119, #594 ) ; +#612 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#613 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -2.000000000000000000, 3.749999999999998200 ) ) ; +#614 = VECTOR ( 'NONE', #1328, 1000.000000000000000 ) ; +#615 = ORIENTED_EDGE ( 'NONE', *, *, #1103, .F. ) ; +#616 = AXIS2_PLACEMENT_3D ( 'NONE', #209, #1081, #318 ) ; +#617 = ORIENTED_EDGE ( 'NONE', *, *, #997, .F. ) ; +#618 = AXIS2_PLACEMENT_3D ( 'NONE', #690, #9, #810 ) ; +#619 = ORIENTED_EDGE ( 'NONE', *, *, #1117, .T. ) ; +#620 = PLANE ( 'NONE', #582 ) ; +#621 = AXIS2_PLACEMENT_3D ( 'NONE', #206, #1077, #312 ) ; +#622 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.826024711554534200E-016, 0.0000000000000000000 ) ) ; +#623 = AXIS2_PLACEMENT_3D ( 'NONE', #683, #6, #808 ) ; +#624 = ORIENTED_EDGE ( 'NONE', *, *, #416, .F. ) ; +#625 = AXIS2_PLACEMENT_3D ( 'NONE', #1210, #425, #1323 ) ; +#626 = LINE ( 'NONE', #687, #609 ) ; +#627 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -2.000000000000000000, 4.839724735885175400 ) ) ; +#629 = ORIENTED_EDGE ( 'NONE', *, *, #943, .F. ) ; +#630 = CARTESIAN_POINT ( 'NONE', ( -1.249999999999999800, -5.000000000000000900, 7.500000000000000000 ) ) ; +#631 = AXIS2_PLACEMENT_3D ( 'NONE', #578, #1345, #826 ) ; +#632 = VECTOR ( 'NONE', #430, 1000.000000000000000 ) ; +#633 = AXIS2_PLACEMENT_3D ( 'NONE', #968, #225, #1106 ) ; +#634 = LINE ( 'NONE', #111, #585 ) ; +#635 = ORIENTED_EDGE ( 'NONE', *, *, #995, .T. ) ; +#636 = CARTESIAN_POINT ( 'NONE', ( 1.186916062510447600E-015, -6.500000000000002700, 7.500000000000000000 ) ) ; +#637 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -6.501000000000001200, 3.750000000000000000 ) ) ; +#638 = ORIENTED_EDGE ( 'NONE', *, *, #175, .F. ) ; +#639 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -1.099510257474846300E-015, 7.500000000000000000 ) ) ; +#640 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.193978171650472000, 3.563260572168286200 ) ) ; +#641 = VERTEX_POINT ( 'NONE', #584 ) ; +#642 = AXIS2_PLACEMENT_3D ( 'NONE', #1454, #714, #31 ) ; +#643 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -2.500000000000001800, 7.500000000000000000 ) ) ; +#644 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#645 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#646 = AXIS2_PLACEMENT_3D ( 'NONE', #1445, #706, #22 ) ; +#647 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#648 = ORIENTED_EDGE ( 'NONE', *, *, #1155, .F. ) ; +#649 = AXIS2_PLACEMENT_3D ( 'NONE', #1322, #553, #1427 ) ; +#650 = ORIENTED_EDGE ( 'NONE', *, *, #979, .F. ) ; +#651 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#652 = CARTESIAN_POINT ( 'NONE', ( 9.809769106156712900, -0.2166612242019395900, 6.024694453479222400 ) ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -2.000000000000000000, 3.750000000000000000 ) ) ; +#654 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.289101893839307700E-017, 0.0000000000000000000 ) ) ; +#655 = VECTOR ( 'NONE', #930, 1000.000000000000000 ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#657 = AXIS2_PLACEMENT_3D ( 'NONE', #545, #1421, #674 ) ; +#658 = LINE ( 'NONE', #307, #632 ) ; +#659 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#660 = VECTOR ( 'NONE', #677, 1000.000000000000000 ) ; +#661 = AXIS2_PLACEMENT_3D ( 'NONE', #1503, #780, #90 ) ; +#662 = CARTESIAN_POINT ( 'NONE', ( -1.249999999999999800, -5.000000000000000900, 0.0000000000000000000 ) ) ; +#663 = LINE ( 'NONE', #3, #655 ) ; +#664 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#665 = ORIENTED_EDGE ( 'NONE', *, *, #969, .T. ) ; +#666 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#667 = ORIENTED_EDGE ( 'NONE', *, *, #180, .F. ) ; +#668 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -2.000000000000000000, 3.749999999999998200 ) ) ; +#669 = ORIENTED_EDGE ( 'NONE', *, *, #248, .T. ) ; +#670 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, 1.249999999999998900, 7.500000000000000000 ) ) ; +#671 = AXIS2_PLACEMENT_3D ( 'NONE', #83, #904, #184 ) ; +#672 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#673 = AXIS2_PLACEMENT_3D ( 'NONE', #892, #519, #1400 ) ; +#674 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839308700E-017, 0.0000000000000000000 ) ) ; +#675 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -2.821742127331540700E-015, 4.999999999999999100 ) ) ; +#677 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#678 = VECTOR ( 'NONE', #414, 1000.000000000000000 ) ; +#679 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#680 = EDGE_CURVE ( 'NONE', #242, #562, #1223, .T. ) ; +#681 = EDGE_LOOP ( 'NONE', ( #1382, #1495, #581, #802 ) ) ; +#682 = CARTESIAN_POINT ( 'NONE', ( -4.329497908315477000, -0.02182779442324270900, 2.134709430492637900 ) ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.7159699472033497200, 7.902722309160207500 ) ) ; +#684 = LINE ( 'NONE', #420, #614 ) ; +#685 = AXIS2_PLACEMENT_3D ( 'NONE', #279, #1175, #390 ) ; +#686 = LINE ( 'NONE', #1514, #678 ) ; +#687 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 0.0000000000000000000 ) ) ; +#688 = VERTEX_POINT ( 'NONE', #1343 ) ; +#689 = ORIENTED_EDGE ( 'NONE', *, *, #1098, .F. ) ; +#690 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -2.500000000000001800, 4.999999999999999100 ) ) ; +#691 = ORIENTED_EDGE ( 'NONE', *, *, #1107, .T. ) ; +#692 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #1031, #274 ) ; +#693 = ORIENTED_EDGE ( 'NONE', *, *, #948, .F. ) ; +#694 = AXIS2_PLACEMENT_3D ( 'NONE', #410, #1316, #541 ) ; +#695 = VERTEX_POINT ( 'NONE', #1242 ) ; +#696 = VECTOR ( 'NONE', #103, 1000.000000000000000 ) ; +#697 = CIRCLE ( 'NONE', #649, 1.199999999999999700 ) ; +#698 = AXIS2_PLACEMENT_3D ( 'NONE', #1290, #511, #1395 ) ; +#699 = VECTOR ( 'NONE', #792, 1000.000000000000000 ) ; +#700 = ORIENTED_EDGE ( 'NONE', *, *, #719, .T. ) ; +#701 = ORIENTED_EDGE ( 'NONE', *, *, #123, .T. ) ; +#702 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.749999999999999100, 11.66689449165796300 ) ) ; +#703 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#704 = VERTEX_POINT ( 'NONE', #1444 ) ; +#705 = LINE ( 'NONE', #803, #660 ) ; +#706 = DIRECTION ( 'NONE', ( -1.826024711554534200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#707 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#708 = AXIS2_PLACEMENT_3D ( 'NONE', #1265, #356, #1364 ) ; +#709 = CARTESIAN_POINT ( 'NONE', ( -5.050000000000000700, -2.000000000000000000, 3.750000000000000000 ) ) ; +#710 = AXIS2_PLACEMENT_3D ( 'NONE', #1270, #487, #1376 ) ; +#711 = LINE ( 'NONE', #1199, #696 ) ; +#712 = AXIS2_PLACEMENT_3D ( 'NONE', #1310, #534, #1414 ) ; +#713 = VERTEX_POINT ( 'NONE', #4 ) ; +#714 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#715 = VECTOR ( 'NONE', #1306, 1000.000000000000000 ) ; +#716 = LINE ( 'NONE', #1319, #699 ) ; +#717 = AXIS2_PLACEMENT_3D ( 'NONE', #480, #1371, #604 ) ; +#718 = ORIENTED_EDGE ( 'NONE', *, *, #925, .T. ) ; +#719 = EDGE_CURVE ( 'NONE', #1280, #889, #1235, .T. ) ; +#720 = ORIENTED_EDGE ( 'NONE', *, *, #1227, .T. ) ; +#721 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.5951532544552892200, 5.000000000000000000 ) ) ; +#722 = EDGE_LOOP ( 'NONE', ( #701, #1453, #1167 ) ) ; +#723 = AXIS2_PLACEMENT_3D ( 'NONE', #492, #169, #1381 ) ; +#724 = ADVANCED_FACE ( 'NONE', ( #1256 ), #1072, .T. ) ; +#725 = VERTEX_POINT ( 'NONE', #155 ) ; +#726 = AXIS2_PLACEMENT_3D ( 'NONE', #985, #237, #1124 ) ; +#727 = CARTESIAN_POINT ( 'NONE', ( -7.110305918072681300, -0.2578099175551527600, 1.392422268938815500 ) ) ; +#728 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ; +#729 = AXIS2_PLACEMENT_3D ( 'NONE', #730, #45, #854 ) ; +#730 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -2.000000000000000000, 3.750000000000000000 ) ) ; +#731 = VECTOR ( 'NONE', #654, 1000.000000000000000 ) ; +#732 = AXIS2_PLACEMENT_3D ( 'NONE', #613, #1475, #746 ) ; +#733 = LINE ( 'NONE', #75, #715 ) ; +#734 = CARTESIAN_POINT ( 'NONE', ( 10.67050209168452700, -0.02182779442324090900, 2.134709430492637900 ) ) ; +#735 = ADVANCED_FACE ( 'NONE', ( #1248 ), #482, .T. ) ; +#736 = CIRCLE ( 'NONE', #657, 2.500000000000000400 ) ; +#737 = VECTOR ( 'NONE', #399, 1000.000000000000000 ) ; +#738 = LINE ( 'NONE', #1409, #731 ) ; +#739 = VERTEX_POINT ( 'NONE', #357 ) ; +#740 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -2.500000000000000400, 0.0000000000000000000 ) ) ; +#741 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#742 = ORIENTED_EDGE ( 'NONE', *, *, #1234, .F. ) ; +#743 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #1004, #252 ) ; +#744 = AXIS2_PLACEMENT_3D ( 'NONE', #1269, #486, #1374 ) ; +#745 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839307900E-017, 0.0000000000000000000 ) ) ; +#746 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#747 = ORIENTED_EDGE ( 'NONE', *, *, #1245, .F. ) ; +#748 = EDGE_CURVE ( 'NONE', #1112, #429, #1201, .T. ) ; +#749 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.000000000000000000, 4.839724735885170900 ) ) ; +#750 = AXIS2_PLACEMENT_3D ( 'NONE', #988, #241, #1130 ) ; +#751 = VECTOR ( 'NONE', #647, 1000.000000000000000 ) ; +#752 = LINE ( 'NONE', #284, #737 ) ; +#753 = PLANE ( 'NONE', #842 ) ; +#754 = LINE ( 'NONE', #774, #751 ) ; +#755 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#756 = VECTOR ( 'NONE', #1493, 1000.000000000000000 ) ; +#757 = EDGE_LOOP ( 'NONE', ( #1480, #566 ) ) ; +#758 = AXIS2_PLACEMENT_3D ( 'NONE', #160, #998, #246 ) ; +#759 = EDGE_LOOP ( 'NONE', ( #781, #552, #1279, #208 ) ) ; +#760 = AXIS2_PLACEMENT_3D ( 'NONE', #286, #1412, #659 ) ; +#761 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#762 = ORIENTED_EDGE ( 'NONE', *, *, #1022, .F. ) ; +#763 = DIRECTION ( 'NONE', ( 1.289101893839307700E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#764 = CARTESIAN_POINT ( 'NONE', ( 9.950000000000002800, -6.500000000000000900, 3.749999999999998200 ) ) ; +#765 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#766 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#767 = CIRCLE ( 'NONE', #671, 2.500000000000000400 ) ; +#768 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -6.500000000000001800, 0.0000000000000000000 ) ) ; +#769 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.7159699472033497200, 7.902722309160207500 ) ) ; +#770 = CIRCLE ( 'NONE', #661, 2.500000000000000400 ) ; +#771 = AXIS2_PLACEMENT_3D ( 'NONE', #906, #187, #1042 ) ; +#772 = CARTESIAN_POINT ( 'NONE', ( 7.137952257596244200, -0.08721262317449153500, 5.673224891767728400 ) ) ; +#773 = VECTOR ( 'NONE', #765, 1000.000000000000000 ) ; +#774 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.882975897653517600E-015, 7.500000000000000000 ) ) ; +#775 = LINE ( 'NONE', #1033, #756 ) ; +#776 = ORIENTED_EDGE ( 'NONE', *, *, #1194, .F. ) ; +#777 = EDGE_LOOP ( 'NONE', ( #1334, #884 ) ) ; +#778 = CARTESIAN_POINT ( 'NONE', ( 10.35856674673478000, -0.08805263603556498500, 5.676077751691909000 ) ) ; +#779 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#780 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#781 = ORIENTED_EDGE ( 'NONE', *, *, #1128, .F. ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( 9.110528091593927500E-031, -3.406337208876704400E-015, 7.500000000000000000 ) ) ; +#783 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 1.249999999999998900, 7.500000000000000000 ) ) ; +#784 = AXIS2_PLACEMENT_3D ( 'NONE', #862, #1003, #249 ) ; +#785 = VERTEX_POINT ( 'NONE', #1162 ) ; +#786 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#787 = AXIS2_PLACEMENT_3D ( 'NONE', #630, #1486, #1286 ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#789 = VECTOR ( 'NONE', #1293, 1000.000000000000000 ) ; +#790 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #923 ) ; +#791 = LINE ( 'NONE', #639, #773 ) ; +#792 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#793 = VECTOR ( 'NONE', #383, 1000.000000000000000 ) ; +#794 = AXIS2_PLACEMENT_3D ( 'NONE', #1349, #703, #112 ) ; +#795 = ADVANCED_FACE ( 'NONE', ( #1200 ), #1173, .F. ) ; +#796 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#797 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ; +#798 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.674581972639835600E-016, 0.0000000000000000000 ) ) ; +#799 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#800 = VERTEX_POINT ( 'NONE', #740 ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( 9.950000000000002800, -2.000000000000000000, 3.749999999999998200 ) ) ; +#802 = ORIENTED_EDGE ( 'NONE', *, *, #1098, .T. ) ; +#803 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#804 = CIRCLE ( 'NONE', #685, 2.500000000000000400 ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( -4.637952257596239700, -0.08721262317449249300, 1.826775108232271400 ) ) ; +#806 = AXIS2_PLACEMENT_3D ( 'NONE', #993, #243, #1133 ) ; +#807 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -2.000000000000000000, 3.749999999999998200 ) ) ; +#808 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.778091562876227700E-015, 1.000000000000000000 ) ) ; +#809 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#810 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#811 = LINE ( 'NONE', #393, #789 ) ; +#812 = VECTOR ( 'NONE', #1510, 1000.000000000000000 ) ; +#813 = VECTOR ( 'NONE', #888, 1000.000000000000000 ) ; +#814 = LINE ( 'NONE', #271, #793 ) ; +#815 = AXIS2_PLACEMENT_3D ( 'NONE', #217, #1095, #327 ) ; +#816 = ORIENTED_EDGE ( 'NONE', *, *, #1208, .F. ) ; +#817 = VERTEX_POINT ( 'NONE', #764 ) ; +#818 = AXIS2_PLACEMENT_3D ( 'NONE', #1353, #1101, #452 ) ; +#819 = CARTESIAN_POINT ( 'NONE', ( -7.686817439937721400, -0.1310893946886561600, 1.692598469101338500 ) ) ; +#820 = ORIENTED_EDGE ( 'NONE', *, *, #1066, .F. ) ; +#821 = AXIS2_PLACEMENT_3D ( 'NONE', #1456, #1250, #89 ) ; +#822 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#823 = AXIS2_PLACEMENT_3D ( 'NONE', #970, #1109, #339 ) ; +#824 = ORIENTED_EDGE ( 'NONE', *, *, #1079, .T. ) ; +#825 = AXIS2_PLACEMENT_3D ( 'NONE', #309, #46, #857 ) ; +#826 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#827 = VECTOR ( 'NONE', #385, 1000.000000000000000 ) ; +#828 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#829 = LINE ( 'NONE', #281, #812 ) ; +#830 = AXIS2_PLACEMENT_3D ( 'NONE', #554, #1428, #679 ) ; +#831 = ADVANCED_FACE ( 'NONE', ( #1177 ), #165, .F. ) ; +#832 = LINE ( 'NONE', #77, #850 ) ; +#833 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#834 = ORIENTED_EDGE ( 'NONE', *, *, #73, .T. ) ; +#835 = AXIS2_PLACEMENT_3D ( 'NONE', #653, #1502, #779 ) ; +#836 = VERTEX_POINT ( 'NONE', #376 ) ; +#837 = AXIS2_PLACEMENT_3D ( 'NONE', #194, #1056, #296 ) ; +#838 = VERTEX_POINT ( 'NONE', #1272 ) ; +#839 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .F. ) ; +#840 = AXIS2_PLACEMENT_3D ( 'NONE', #1494, #766, #76 ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( -5.190230893843290600, -0.2166612242019425600, 6.024694453479224200 ) ) ; +#842 = AXIS2_PLACEMENT_3D ( 'NONE', #61, #1244, #666 ) ; +#843 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .F. ) ; +#844 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -8.890457814381136400E-016, 1.000000000000000000 ) ) ; +#845 = LINE ( 'NONE', #1180, #813 ) ; +#846 = ADVANCED_FACE ( 'NONE', ( #1170 ), #53, .F. ) ; +#847 = AXIS2_PLACEMENT_3D ( 'NONE', #1281, #1384, #622 ) ; +#848 = VERTEX_POINT ( 'NONE', #1189 ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( -5.050000000000000700, -6.501000000000001200, 3.750000000000000000 ) ) ; +#850 = VECTOR ( 'NONE', #899, 1000.000000000000000 ) ; +#851 = LINE ( 'NONE', #643, #827 ) ; +#852 = ORIENTED_EDGE ( 'NONE', *, *, #1217, .T. ) ; +#853 = CARTESIAN_POINT ( 'NONE', ( -7.450000000000000200, -6.500000000000000900, 3.750000000000000000 ) ) ; +#854 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#855 = AXIS2_PLACEMENT_3D ( 'NONE', #707, #26, #828 ) ; +#856 = ORIENTED_EDGE ( 'NONE', *, *, #24, .T. ) ; +#857 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#858 = ADVANCED_FACE ( 'NONE', ( #1174 ), #1308, .T. ) ; +#859 = ORIENTED_EDGE ( 'NONE', *, *, #1238, .T. ) ; +#860 = CARTESIAN_POINT ( 'NONE', ( 10.18832293432734700, -0.1306994163797591500, 1.693853440988977800 ) ) ; +#861 = AXIS2_PLACEMENT_3D ( 'NONE', #1432, #1076, #311 ) ; +#862 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 7.500000000000000000 ) ) ; +#863 = ORIENTED_EDGE ( 'NONE', *, *, #1205, .F. ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( 9.950000000000002800, -6.501000000000001200, 3.749999999999998200 ) ) ; +#865 = MANIFOLD_SOLID_BREP ( 'Fillet8', #1436 ) ; +#866 = VECTOR ( 'NONE', #266, 1000.000000000000000 ) ; +#867 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -8.056886836495674800E-017, 3.750000000000000000 ) ) ; +#868 = FACE_OUTER_BOUND ( 'NONE', #523, .T. ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 1.249999999999998900, 11.66689449165796300 ) ) ; +#870 = LINE ( 'NONE', #636, #866 ) ; +#871 = AXIS2_PLACEMENT_3D ( 'NONE', #1070, #305, #1212 ) ; +#872 = VECTOR ( 'NONE', #627, 1000.000000000000000 ) ; +#873 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ; +#874 = AXIS2_PLACEMENT_3D ( 'NONE', #702, #984, #39 ) ; +#875 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#876 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #499 ) ; +#877 = ORIENTED_EDGE ( 'NONE', *, *, #971, .T. ) ; +#878 = ORIENTED_EDGE ( 'NONE', *, *, #1080, .T. ) ; +#879 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 4.568978171650468500, 4.813260572168286600 ) ) ; +#880 = AXIS2_PLACEMENT_3D ( 'NONE', #1069, #1209, #424 ) ; +#881 = ADVANCED_FACE ( 'NONE', ( #1151 ), #153, .T. ) ; +#882 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -6.501000000000001200, 3.749999999999998200 ) ) ; +#883 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #1123, #350 ) ; +#884 = ORIENTED_EDGE ( 'NONE', *, *, #954, .F. ) ; +#885 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 7.500000000000000000 ) ) ; +#886 = AXIS2_PLACEMENT_3D ( 'NONE', #1119, #347, #1257 ) ; +#887 = FACE_BOUND ( 'NONE', #777, .T. ) ; +#888 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.674581972639835600E-016, -0.0000000000000000000 ) ) ; +#889 = VERTEX_POINT ( 'NONE', #1141 ) ; +#890 = AXIS2_PLACEMENT_3D ( 'NONE', #807, #116, #933 ) ; +#891 = LINE ( 'NONE', #885, #872 ) ; +#892 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -2.000000000000000000, 3.750000000000000000 ) ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 4.243119266055035900, 8.772935779816496200 ) ) ; +#894 = PLANE ( 'NONE', #557 ) ; +#895 = VECTOR ( 'NONE', #761, 1000.000000000000000 ) ; +#896 = VERTEX_POINT ( 'NONE', #477 ) ; +#897 = VERTEX_POINT ( 'NONE', #1368 ) ; +#898 = AXIS2_PLACEMENT_3D ( 'NONE', #721, #36, #844 ) ; +#899 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#900 = ORIENTED_EDGE ( 'NONE', *, *, #925, .F. ) ; +#901 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.2873478855663426600, -0.9578262852211522100 ) ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( 7.685057604652764800, -0.2155345818696488000, 6.022093578648767900 ) ) ; +#903 = AXIS2_PLACEMENT_3D ( 'NONE', #415, #200, #195 ) ; +#904 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#905 = AXIS2_PLACEMENT_3D ( 'NONE', #668, #786, #796 ) ; +#906 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#907 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -0.5951532544552892200, 5.000000000000000000 ) ) ; +#908 = CARTESIAN_POINT ( 'NONE', ( 10.80374953983672300, -2.718975760686304100E-016, 5.192801450981600700 ) ) ; +#909 = ORIENTED_EDGE ( 'NONE', *, *, #389, .T. ) ; +#910 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.674581972639835600E-016, 0.0000000000000000000 ) ) ; +#911 = CARTESIAN_POINT ( 'NONE', ( -7.314942395347237000, -0.2155345818696507700, 6.022093578648770600 ) ) ; +#912 = CIRCLE ( 'NONE', #692, 2.500000000000000000 ) ; +#913 = AXIS2_PLACEMENT_3D ( 'NONE', #355, #1264, #479 ) ; +#914 = VECTOR ( 'NONE', #1485, 1000.000000000000000 ) ; +#915 = AXIS2_PLACEMENT_3D ( 'NONE', #662, #651, #528 ) ; +#916 = ORIENTED_EDGE ( 'NONE', *, *, #1247, .T. ) ; +#917 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#918 = CIRCLE ( 'NONE', #698, 2.500000000000000000 ) ; +#919 = ORIENTED_EDGE ( 'NONE', *, *, #8, .T. ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#921 = VERTEX_POINT ( 'NONE', #1471 ) ; +#922 = EDGE_CURVE ( 'NONE', #1268, #1051, #1198, .T. ) ; +#923 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#924 = LINE ( 'NONE', #1391, #914 ) ; +#925 = EDGE_CURVE ( 'NONE', #1470, #118, #1148, .T. ) ; +#926 = EDGE_CURVE ( 'NONE', #1470, #1051, #1149, .T. ) ; +#927 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#928 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.023996660800371200, 12.08513584526882300 ) ) ; +#929 = PLANE ( 'NONE', #871 ) ; +#930 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#931 = ORIENTED_EDGE ( 'NONE', *, *, #1229, .T. ) ; +#932 = EDGE_CURVE ( 'NONE', #817, #481, #1195, .T. ) ; +#933 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#934 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 3.124999999999996000, 12.50000000000000000 ) ) ; +#935 = VECTOR ( 'NONE', #1159, 1000.000000000000000 ) ; +#936 = EDGE_CURVE ( 'NONE', #817, #100, #1129, .T. ) ; +#937 = ORIENTED_EDGE ( 'NONE', *, *, #1158, .F. ) ; +#938 = CARTESIAN_POINT ( 'NONE', ( -8.415063509461099000, -2.881879549380810300E-015, 4.999999999999999100 ) ) ; +#939 = VECTOR ( 'NONE', #508, 1000.000000000000000 ) ; +#940 = EDGE_CURVE ( 'NONE', #100, #143, #1160, .T. ) ; +#941 = LINE ( 'NONE', #920, #895 ) ; +#942 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#943 = EDGE_CURVE ( 'NONE', #481, #143, #1127, .T. ) ; +#944 = ORIENTED_EDGE ( 'NONE', *, *, #1088, .T. ) ; +#945 = ORIENTED_EDGE ( 'NONE', *, *, #130, .T. ) ; +#946 = ADVANCED_FACE ( 'NONE', ( #1108 ), #1086, .T. ) ; +#947 = VERTEX_POINT ( 'NONE', #533 ) ; +#948 = EDGE_CURVE ( 'NONE', #118, #1268, #1087, .T. ) ; +#949 = EDGE_CURVE ( 'NONE', #122, #1483, #1089, .T. ) ; +#950 = ORIENTED_EDGE ( 'NONE', *, *, #306, .T. ) ; +#951 = EDGE_CURVE ( 'NONE', #1483, #562, #1104, .T. ) ; +#952 = VERTEX_POINT ( 'NONE', #466 ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( -8.166889719222085700, -0.02249373289760835800, 2.130495048292799800 ) ) ; +#954 = EDGE_CURVE ( 'NONE', #562, #242, #1061, .T. ) ; +#955 = LINE ( 'NONE', #788, #956 ) ; +#956 = VECTOR ( 'NONE', #102, 1000.000000000000000 ) ; +#957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#958 = EDGE_CURVE ( 'NONE', #122, #242, #1064, .T. ) ; +#959 = VECTOR ( 'NONE', #292, 1000.000000000000000 ) ; +#960 = EDGE_CURVE ( 'NONE', #1435, #1288, #1071, .T. ) ; +#961 = LINE ( 'NONE', #783, #959 ) ; +#962 = ORIENTED_EDGE ( 'NONE', *, *, #922, .T. ) ; +#963 = EDGE_LOOP ( 'NONE', ( #916, #218, #277, #227, #878, #1092, #321, #919, #117 ) ) ; +#964 = ADVANCED_FACE ( 'NONE', ( #1111 ), #1019, .F. ) ; +#965 = PLANE ( 'NONE', #847 ) ; +#966 = ORIENTED_EDGE ( 'NONE', *, *, #1079, .F. ) ; +#967 = EDGE_CURVE ( 'NONE', #1435, #896, #1021, .T. ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -2.500000000000000400, 4.999999999999999100 ) ) ; +#969 = EDGE_CURVE ( 'NONE', #896, #229, #1023, .T. ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -2.000000000000000000, 3.749999999999998200 ) ) ; +#971 = EDGE_CURVE ( 'NONE', #229, #897, #1450, .T. ) ; +#972 = LINE ( 'NONE', #374, #939 ) ; +#973 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #443, #573, #1430, #555, #93, #911, #192, #1049, #289, #1193, #409, #1313, #538, #1416, #841, #144, #975, #228, #1116, #344 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 1.588394506787748000E-021, 0.0006566826780645955900, 0.001313365356129191200, 0.001970048034193789100, 0.002298389373226086800, 0.002626730712258384900, 0.003283413390322980300, 0.003940096068387575700, 0.004596778746452171100, 0.005253461424516767300 ), + .UNSPECIFIED. ) ; +#974 = ORIENTED_EDGE ( 'NONE', *, *, #1028, .F. ) ; +#975 = CARTESIAN_POINT ( 'NONE', ( -4.641433253265220500, -0.08805263603556653900, 5.676077751691911600 ) ) ; +#976 = EDGE_CURVE ( 'NONE', #897, #295, #1039, .T. ) ; +#977 = VECTOR ( 'NONE', #405, 1000.000000000000000 ) ; +#978 = FACE_OUTER_BOUND ( 'NONE', #1154, .T. ) ; +#979 = EDGE_CURVE ( 'NONE', #1288, #295, #1017, .T. ) ; +#980 = ORIENTED_EDGE ( 'NONE', *, *, #979, .T. ) ; +#981 = EDGE_CURVE ( 'NONE', #641, #991, #1001, .T. ) ; +#982 = VERTEX_POINT ( 'NONE', #97 ) ; +#983 = ORIENTED_EDGE ( 'NONE', *, *, #1144, .T. ) ; +#984 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#985 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -6.500000000000000900, 3.750000000000000000 ) ) ; +#986 = EDGE_CURVE ( 'NONE', #1378, #991, #961, .T. ) ; +#987 = ADVANCED_FACE ( 'NONE', ( #978 ), #1053, .F. ) ; +#988 = CARTESIAN_POINT ( 'NONE', ( 3.575196231792993000E-032, -2.773400806312566600E-015, 7.500000000000000000 ) ) ; +#989 = EDGE_CURVE ( 'NONE', #1375, #1378, #955, .T. ) ; +#990 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -4.642997865484646500E-016, 2.500000000000000400 ) ) ; +#991 = VERTEX_POINT ( 'NONE', #670 ) ; +#992 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( 3.575196231792993000E-032, -2.773400806312566600E-015, 7.500000000000000000 ) ) ; +#994 = ORIENTED_EDGE ( 'NONE', *, *, #958, .T. ) ; +#995 = EDGE_CURVE ( 'NONE', #1375, #137, #1000, .T. ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( 9.611526293169243100, -0.2574581628343416400, 1.393165083720623100 ) ) ; +#997 = EDGE_CURVE ( 'NONE', #412, #137, #972, .T. ) ; +#998 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#999 = VECTOR ( 'NONE', #51, 1000.000000000000000 ) ; +#1000 = LINE ( 'NONE', #1418, #935 ) ; +#1001 = LINE ( 'NONE', #1190, #977 ) ; +#1002 = EDGE_CURVE ( 'NONE', #412, #739, #924, .T. ) ; +#1003 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1004 = DIRECTION ( 'NONE', ( -1.826024711554534200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1005 = ORIENTED_EDGE ( 'NONE', *, *, #1176, .F. ) ; +#1006 = EDGE_CURVE ( 'NONE', #739, #59, #941, .T. ) ; +#1007 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .T. ) ; +#1008 = EDGE_LOOP ( 'NONE', ( #572, #351, #173, #25 ) ) ; +#1009 = EDGE_CURVE ( 'NONE', #59, #1216, #918, .T. ) ; +#1010 = EDGE_LOOP ( 'NONE', ( #7, #595, #1243, #1357 ) ) ; +#1011 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839308700E-017, 0.0000000000000000000 ) ) ; +#1012 = EDGE_CURVE ( 'NONE', #1216, #982, #891, .T. ) ; +#1013 = ORIENTED_EDGE ( 'NONE', *, *, #1046, .T. ) ; +#1014 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#1015 = EDGE_CURVE ( 'NONE', #982, #429, #912, .T. ) ; +#1016 = EDGE_CURVE ( 'NONE', #535, #1112, #870, .T. ) ; +#1017 = LINE ( 'NONE', #162, #999 ) ; +#1018 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 2.023996660800371200, 12.08513584526882300 ) ) ; +#1019 = CYLINDRICAL_SURFACE ( 'NONE', #708, 2.500000000000000000 ) ; +#1020 = ADVANCED_FACE ( 'NONE', ( #887, #868 ), #1296, .T. ) ; +#1021 = LINE ( 'NONE', #1473, #1041 ) ; +#1022 = EDGE_CURVE ( 'NONE', #535, #836, #832, .T. ) ; +#1023 = CIRCLE ( 'NONE', #710, 2.500000000000000400 ) ; +#1024 = ORIENTED_EDGE ( 'NONE', *, *, #948, .T. ) ; +#1025 = EDGE_CURVE ( 'NONE', #836, #641, #851, .T. ) ; +#1026 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1027 = VERTEX_POINT ( 'NONE', #768 ) ; +#1028 = EDGE_CURVE ( 'NONE', #151, #295, #829, .T. ) ; +#1029 = ORIENTED_EDGE ( 'NONE', *, *, #1110, .T. ) ; +#1030 = EDGE_CURVE ( 'NONE', #897, #151, #845, .T. ) ; +#1031 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1032 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1033 = CARTESIAN_POINT ( 'NONE', ( 9.110528091593927500E-031, -3.406337208876704400E-015, 2.500000000000000400 ) ) ; +#1034 = EDGE_LOOP ( 'NONE', ( #1455, #624, #1318, #1419 ) ) ; +#1035 = EDGE_CURVE ( 'NONE', #1487, #229, #814, .T. ) ; +#1036 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -2.500000000000002700, 7.500000000000000000 ) ) ; +#1037 = EDGE_CURVE ( 'NONE', #1487, #896, #811, .T. ) ; +#1038 = CARTESIAN_POINT ( 'NONE', ( 8.202055840178029900, -0.3020295653258289700, 6.191614587075705800 ) ) ; +#1039 = CIRCLE ( 'NONE', #712, 2.500000000000000400 ) ; +#1040 = EDGE_CURVE ( 'NONE', #896, #1394, #791, .T. ) ; +#1041 = VECTOR ( 'NONE', #1466, 1000.000000000000000 ) ; +#1042 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1043 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1044 = VECTOR ( 'NONE', #992, 1000.000000000000000 ) ; +#1045 = ORIENTED_EDGE ( 'NONE', *, *, #926, .F. ) ; +#1046 = EDGE_CURVE ( 'NONE', #1410, #896, #804, .T. ) ; +#1047 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -0.2201532544552931000, 6.250000000000000000 ) ) ; +#1048 = ORIENTED_EDGE ( 'NONE', *, *, #949, .F. ) ; +#1049 = CARTESIAN_POINT ( 'NONE', ( -6.797944159821979000, -0.3020295653258307000, 6.191614587075708400 ) ) ; +#1050 = EDGE_CURVE ( 'NONE', #1410, #1394, #775, .T. ) ; +#1051 = VERTEX_POINT ( 'NONE', #1301 ) ; +#1052 = ORIENTED_EDGE ( 'NONE', *, *, #1192, .F. ) ; +#1053 = PLANE ( 'NONE', #694 ) ; +#1054 = EDGE_CURVE ( 'NONE', #704, #1114, #767, .T. ) ; +#1055 = CARTESIAN_POINT ( 'NONE', ( -5.050000000000000700, -6.500000000000000900, 3.750000000000000000 ) ) ; +#1056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1057 = ORIENTED_EDGE ( 'NONE', *, *, #8, .F. ) ; +#1058 = PRODUCT ( 'Trigger_Guide', 'Trigger_Guide', '', ( #299 ) ) ; +#1059 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1060 = EDGE_CURVE ( 'NONE', #120, #704, #754, .T. ) ; +#1061 = CIRCLE ( 'NONE', #729, 1.199999999999999700 ) ; +#1062 = EDGE_CURVE ( 'NONE', #120, #1114, #752, .T. ) ; +#1063 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1064 = LINE ( 'NONE', #472, #1044 ) ; +#1065 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Guide', ( #865, #507 ), #522 ) ; +#1066 = EDGE_CURVE ( 'NONE', #193, #1513, #770, .T. ) ; +#1067 = VECTOR ( 'NONE', #149, 1000.000000000000000 ) ; +#1068 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( 6.686454931599598000E-016, -2.500000000000003600, 4.999999999999999100 ) ) ; +#1070 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.124999999999996000, 12.50000000000000000 ) ) ; +#1071 = CIRCLE ( 'NONE', #717, 2.500000000000000400 ) ; +#1072 = PLANE ( 'NONE', #806 ) ; +#1073 = ORIENTED_EDGE ( 'NONE', *, *, #1035, .T. ) ; +#1074 = ORIENTED_EDGE ( 'NONE', *, *, #222, .F. ) ; +#1075 = EDGE_CURVE ( 'NONE', #193, #78, #738, .T. ) ; +#1076 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1077 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1078 = ORIENTED_EDGE ( 'NONE', *, *, #989, .F. ) ; +#1079 = EDGE_CURVE ( 'NONE', #78, #1513, #733, .T. ) ; +#1080 = EDGE_CURVE ( 'NONE', #1513, #838, #736, .T. ) ; +#1081 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #1186, .F. ) ; +#1083 = EDGE_CURVE ( 'NONE', #1513, #600, #716, .T. ) ; +#1084 = VECTOR ( 'NONE', #1461, 1000.000000000000000 ) ; +#1085 = EDGE_CURVE ( 'NONE', #600, #838, #711, .T. ) ; +#1086 = CYLINDRICAL_SURFACE ( 'NONE', #723, 2.500000000000000000 ) ; +#1087 = LINE ( 'NONE', #869, #1084 ) ; +#1088 = EDGE_CURVE ( 'NONE', #1483, #122, #697, .T. ) ; +#1089 = CIRCLE ( 'NONE', #726, 1.199999999999999700 ) ; +#1090 = EDGE_CURVE ( 'NONE', #547, #402, #686, .T. ) ; +#1091 = CARTESIAN_POINT ( 'NONE', ( -8.415063509461099000, -1.084787430682435600E-016, 2.500000000000000000 ) ) ; +#1092 = ORIENTED_EDGE ( 'NONE', *, *, #175, .T. ) ; +#1093 = ORIENTED_EDGE ( 'NONE', *, *, #719, .F. ) ; +#1094 = CARTESIAN_POINT ( 'NONE', ( 7.889694081927321400, -0.2578099175551523700, 1.392422268938814400 ) ) ; +#1095 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1096 = ORIENTED_EDGE ( 'NONE', *, *, #428, .T. ) ; +#1097 = EDGE_CURVE ( 'NONE', #739, #402, #705, .T. ) ; +#1098 = EDGE_CURVE ( 'NONE', #412, #547, #663, .T. ) ; +#1099 = EDGE_CURVE ( 'NONE', #402, #212, #658, .T. ) ; +#1100 = ORIENTED_EDGE ( 'NONE', *, *, #1028, .T. ) ; +#1101 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1102 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.5951532544552892200, 0.0000000000000000000 ) ) ; +#1103 = EDGE_CURVE ( 'NONE', #212, #59, #684, .T. ) ; +#1104 = LINE ( 'NONE', #849, #1067 ) ; +#1105 = VECTOR ( 'NONE', #1143, 1000.000000000000000 ) ; +#1106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1107 = EDGE_CURVE ( 'NONE', #1157, #800, #626, .T. ) ; +#1108 = FACE_OUTER_BOUND ( 'NONE', #1183, .T. ) ; +#1109 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1110 = EDGE_CURVE ( 'NONE', #800, #982, #611, .T. ) ; +#1111 = FACE_OUTER_BOUND ( 'NONE', #15, .T. ) ; +#1112 = VERTEX_POINT ( 'NONE', #1213 ) ; +#1113 = ORIENTED_EDGE ( 'NONE', *, *, #211, .T. ) ; +#1114 = VERTEX_POINT ( 'NONE', #938 ) ; +#1115 = EDGE_CURVE ( 'NONE', #429, #372, #634, .T. ) ; +#1116 = CARTESIAN_POINT ( 'NONE', ( -4.196250460163280000, -2.605473345754227400E-015, 5.192801450981601600 ) ) ; +#1117 = EDGE_CURVE ( 'NONE', #1027, #372, #608, .T. ) ; +#1118 = EDGE_CURVE ( 'NONE', #1112, #1027, #580, .T. ) ; +#1119 = CARTESIAN_POINT ( 'NONE', ( 9.110528091593927500E-031, -3.406337208876704400E-015, 7.500000000000000000 ) ) ; +#1120 = CARTESIAN_POINT ( 'NONE', ( -5.388473706830761300, -0.2574581628343417500, 1.393165083720625100 ) ) ; +#1121 = EDGE_CURVE ( 'NONE', #481, #817, #579, .T. ) ; +#1122 = ORIENTED_EDGE ( 'NONE', *, *, #1176, .T. ) ; +#1123 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1124 = DIRECTION ( 'NONE', ( 7.228014483236697500E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1125 = VECTOR ( 'NONE', #741, 1000.000000000000000 ) ; +#1126 = ADVANCED_FACE ( 'NONE', ( #593 ), #544, .F. ) ; +#1127 = LINE ( 'NONE', #1275, #1105 ) ; +#1128 = EDGE_CURVE ( 'NONE', #98, #1027, #564, .T. ) ; +#1129 = LINE ( 'NONE', #864, #1125 ) ; +#1130 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839307700E-017, 0.0000000000000000000 ) ) ; +#1131 = VECTOR ( 'NONE', #603, 1000.000000000000000 ) ; +#1132 = EDGE_CURVE ( 'NONE', #535, #98, #561, .T. ) ; +#1133 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839307700E-017, 0.0000000000000000000 ) ) ; +#1134 = ORIENTED_EDGE ( 'NONE', *, *, #123, .F. ) ; +#1135 = EDGE_CURVE ( 'NONE', #460, #1288, #575, .T. ) ; +#1136 = CARTESIAN_POINT ( 'NONE', ( 9.191376039107220600, -0.3140253381801252900, 1.286824089399718900 ) ) ; +#1137 = ORIENTED_EDGE ( 'NONE', *, *, #1166, .T. ) ; +#1138 = ORIENTED_EDGE ( 'NONE', *, *, #1196, .T. ) ; +#1139 = CARTESIAN_POINT ( 'NONE', ( 6.584936490538905400, -1.645141966019346500E-015, 4.999999999999999100 ) ) ; +#1140 = EDGE_CURVE ( 'NONE', #151, #836, #543, .T. ) ; +#1141 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.500000000000002700, 0.0000000000000000000 ) ) ; +#1142 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1143 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1144 = EDGE_CURVE ( 'NONE', #98, #725, #521, .T. ) ; +#1145 = ORIENTED_EDGE ( 'NONE', *, *, #1192, .T. ) ; +#1146 = EDGE_CURVE ( 'NONE', #725, #133, #516, .T. ) ; +#1147 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.882975897653517600E-015, 7.500000000000000000 ) ) ; +#1148 = CIRCLE ( 'NONE', #744, 0.5000000000000004400 ) ; +#1149 = LINE ( 'NONE', #354, #1131 ) ; +#1150 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1151 = FACE_OUTER_BOUND ( 'NONE', #431, .T. ) ; +#1152 = EDGE_CURVE ( 'NONE', #264, #133, #498, .T. ) ; +#1153 = PLANE ( 'NONE', #576 ) ; +#1154 = EDGE_LOOP ( 'NONE', ( #1463, #94, #316 ) ) ; +#1155 = EDGE_CURVE ( 'NONE', #264, #460, #514, .T. ) ; +#1156 = ORIENTED_EDGE ( 'NONE', *, *, #1229, .F. ) ; +#1157 = VERTEX_POINT ( 'NONE', #549 ) ; +#1158 = EDGE_CURVE ( 'NONE', #133, #848, #469, .T. ) ; +#1159 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839307700E-017, -0.0000000000000000000 ) ) ; +#1160 = CIRCLE ( 'NONE', #732, 1.200000000000000600 ) ; +#1161 = PLANE ( 'NONE', #567 ) ; +#1162 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.000000000000000000, 4.839724735885170900 ) ) ; +#1163 = EDGE_CURVE ( 'NONE', #264, #848, #476, .T. ) ; +#1164 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -0.2201532544552931000, 6.250000000000000000 ) ) ; +#1165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1166 = EDGE_CURVE ( 'NONE', #1207, #1263, #457, .T. ) ; +#1167 = ORIENTED_EDGE ( 'NONE', *, *, #1135, .F. ) ; +#1168 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -5.000000000000000900, 7.500000000000000000 ) ) ; +#1169 = EDGE_CURVE ( 'NONE', #1263, #1470, #471, .T. ) ; +#1170 = FACE_OUTER_BOUND ( 'NONE', #317, .T. ) ; +#1171 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1172 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.289101893839307900E-017, 0.0000000000000000000 ) ) ; +#1173 = CYLINDRICAL_SURFACE ( 'NONE', #787, 2.500000000000000000 ) ; +#1174 = FACE_OUTER_BOUND ( 'NONE', #1246, .T. ) ; +#1175 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1176 = EDGE_CURVE ( 'NONE', #118, #991, #456, .T. ) ; +#1177 = FACE_OUTER_BOUND ( 'NONE', #526, .T. ) ; +#1178 = EDGE_LOOP ( 'NONE', ( #1005, #1024, #1314, #348 ) ) ; +#1179 = EDGE_CURVE ( 'NONE', #641, #1487, #454, .T. ) ; +#1180 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -4.642970389728855600E-016, 4.999999999999999100 ) ) ; +#1181 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -0.2201532544552931000, 6.250000000000000000 ) ) ; +#1182 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 1.249999999999998900, 7.500000000000000000 ) ) ; +#1183 = EDGE_LOOP ( 'NONE', ( #1433, #937, #131, #1206, #1082, #204 ) ) ; +#1184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1185 = CARTESIAN_POINT ( 'NONE', ( 8.526202817575061500, -0.3304907490347989700, 6.242381029376956800 ) ) ; +#1186 = EDGE_CURVE ( 'NONE', #1394, #1225, #439, .T. ) ; +#1187 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1188 = ORIENTED_EDGE ( 'NONE', *, *, #1152, .F. ) ; +#1189 = CARTESIAN_POINT ( 'NONE', ( 10.91506350946110300, 6.918603989134388600E-016, 2.500000000000000400 ) ) ; +#1190 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#1191 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1192 = EDGE_CURVE ( 'NONE', #1225, #310, #496, .T. ) ; +#1193 = CARTESIAN_POINT ( 'NONE', ( -6.473797182424939400, -0.3304907490348008600, 6.242381029376958600 ) ) ; +#1194 = EDGE_CURVE ( 'NONE', #434, #302, #437, .T. ) ; +#1195 = CIRCLE ( 'NONE', #743, 1.199999999999999700 ) ; +#1196 = EDGE_CURVE ( 'NONE', #302, #1390, #422, .T. ) ; +#1197 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1198 = CIRCLE ( 'NONE', #758, 0.5000000000000004400 ) ; +#1199 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.882974467288907900E-015, 2.500000000000000000 ) ) ; +#1200 = FACE_OUTER_BOUND ( 'NONE', #1476, .T. ) ; +#1201 = LINE ( 'NONE', #263, #1219 ) ; +#1202 = EDGE_CURVE ( 'NONE', #1390, #1207, #419, .T. ) ; +#1203 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#1204 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ; +#1205 = EDGE_CURVE ( 'NONE', #1268, #1378, #438, .T. ) ; +#1206 = ORIENTED_EDGE ( 'NONE', *, *, #389, .F. ) ; +#1207 = VERTEX_POINT ( 'NONE', #1489 ) ; +#1208 = EDGE_CURVE ( 'NONE', #1051, #713, #417, .T. ) ; +#1209 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.674581972639835600E-016, 0.0000000000000000000 ) ) ; +#1210 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, 1.127964157109394800E-016, 3.749999999999998200 ) ) ; +#1211 = DATE_TIME_ROLE ( 'classification_date' ) ; +#1212 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1213 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, -6.500000000000001800, 7.500000000000000000 ) ) ; +#1214 = EDGE_CURVE ( 'NONE', #713, #285, #398, .T. ) ; +#1215 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.568978171650468500, 4.813260572168286600 ) ) ; +#1216 = VERTEX_POINT ( 'NONE', #512 ) ; +#1217 = EDGE_CURVE ( 'NONE', #285, #947, #370, .T. ) ; +#1218 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1219 = VECTOR ( 'NONE', #510, 1000.000000000000000 ) ; +#1220 = EDGE_CURVE ( 'NONE', #947, #380, #373, .T. ) ; +#1221 = CYLINDRICAL_SURFACE ( 'NONE', #815, 5.000000000000000000 ) ; +#1222 = EDGE_CURVE ( 'NONE', #380, #952, #362, .T. ) ; +#1223 = CIRCLE ( 'NONE', #830, 1.199999999999999700 ) ; +#1224 = CYLINDRICAL_SURFACE ( 'NONE', #818, 1.199999999999999700 ) ; +#1225 = VERTEX_POINT ( 'NONE', #181 ) ; +#1226 = ORIENTED_EDGE ( 'NONE', *, *, #1062, .F. ) ; +#1227 = EDGE_CURVE ( 'NONE', #952, #1261, #391, .T. ) ; +#1228 = ORIENTED_EDGE ( 'NONE', *, *, #1030, .T. ) ; +#1229 = EDGE_CURVE ( 'NONE', #921, #1261, #358, .T. ) ; +#1230 = EDGE_CURVE ( 'NONE', #921, #600, #377, .T. ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( 7.313182560062283100, -0.1310893946886553800, 1.692598469101337600 ) ) ; +#1232 = ORIENTED_EDGE ( 'NONE', *, *, #1090, .F. ) ; +#1233 = EDGE_CURVE ( 'NONE', #78, #1375, #343, .T. ) ; +#1234 = EDGE_CURVE ( 'NONE', #688, #445, #333, .T. ) ; +#1235 = CIRCLE ( 'NONE', #825, 2.500000000000000000 ) ; +#1236 = ADVANCED_FACE ( 'NONE', ( #340 ), #314, .T. ) ; +#1237 = CYLINDRICAL_SURFACE ( 'NONE', #821, 0.5000000000000004400 ) ; +#1238 = EDGE_CURVE ( 'NONE', #688, #1280, #330, .T. ) ; +#1239 = FACE_OUTER_BOUND ( 'NONE', #1008, .T. ) ; +#1240 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.826024711554534200E-016, 0.0000000000000000000 ) ) ; +#1241 = CYLINDRICAL_SURFACE ( 'NONE', #823, 2.500000000000001300 ) ; +#1242 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.000000000000000000, 2.660275264114828600 ) ) ; +#1243 = ORIENTED_EDGE ( 'NONE', *, *, #954, .T. ) ; +#1244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9578262852211522100, -0.2873478855663426600 ) ) ; +#1245 = EDGE_CURVE ( 'NONE', #445, #1280, #328, .T. ) ; +#1246 = EDGE_LOOP ( 'NONE', ( #1481, #1460, #1057, #1393, #700, #1204, #689, #478, #41, #1379 ) ) ; +#1247 = EDGE_CURVE ( 'NONE', #785, #704, #323, .T. ) ; +#1248 = FACE_OUTER_BOUND ( 'NONE', #174, .T. ) ; +#1249 = EDGE_CURVE ( 'NONE', #785, #695, #298, .T. ) ; +#1250 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1251 = ADVANCED_FACE ( 'NONE', ( #272 ), #620, .F. ) ; +#1252 = ORIENTED_EDGE ( 'NONE', *, *, #1115, .F. ) ; +#1253 = CARTESIAN_POINT ( 'NONE', ( 6.584936490538905400, -1.645141966019346500E-015, 4.999999999999999100 ) ) ; +#1254 = VECTOR ( 'NONE', #1408, 1000.000000000000000 ) ; +#1255 = LINE ( 'NONE', #530, #1254 ) ; +#1256 = FACE_OUTER_BOUND ( 'NONE', #1365, .T. ) ; +#1257 = DIRECTION ( 'NONE', ( 1.000000000000000000, 2.674581972639835600E-016, 0.0000000000000000000 ) ) ; +#1258 = CARTESIAN_POINT ( 'NONE', ( -5.808623960892784800, -0.3140253381801250700, 1.286824089399720700 ) ) ; +#1259 = FACE_OUTER_BOUND ( 'NONE', #378, .T. ) ; +#1260 = ADVANCED_FACE ( 'NONE', ( #291 ), #1153, .F. ) ; +#1261 = VERTEX_POINT ( 'NONE', #1386 ) ; +#1262 = ORIENTED_EDGE ( 'NONE', *, *, #1002, .T. ) ; +#1263 = VERTEX_POINT ( 'NONE', #1018 ) ; +#1264 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1265 = CARTESIAN_POINT ( 'NONE', ( 3.750000000000000400, -5.000000000000000900, 7.500000000000000000 ) ) ; +#1266 = ADVANCED_FACE ( 'NONE', ( #265 ), #260, .F. ) ; +#1267 = CARTESIAN_POINT ( 'NONE', ( 8.862088610100785900, -0.3348828897120945700, 1.250092839441482500 ) ) ; +#1268 = VERTEX_POINT ( 'NONE', #1285 ) ; +#1269 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 1.749999999999999100, 11.66689449165796300 ) ) ; +#1270 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, 1.127964157109394800E-016, 3.749999999999998200 ) ) ; +#1271 = VECTOR ( 'NONE', #1187, 1000.000000000000000 ) ; +#1272 = CARTESIAN_POINT ( 'NONE', ( -4.084936490538901800, -5.265899366166994800E-017, 2.500000000000000000 ) ) ; +#1273 = CARTESIAN_POINT ( 'NONE', ( 3.222754734598273500E-017, -2.500000000000002700, 2.500000000000000000 ) ) ; +#1274 = LINE ( 'NONE', #368, #1271 ) ; +#1275 = CARTESIAN_POINT ( 'NONE', ( 7.550000000000001600, -6.501000000000001200, 3.749999999999998200 ) ) ; +#1276 = FACE_OUTER_BOUND ( 'NONE', #1317, .T. ) ; +#1277 = VECTOR ( 'NONE', #384, 1000.000000000000000 ) ; +#1278 = EDGE_LOOP ( 'NONE', ( #863, #962, #145, #1441, #852, #366, #1429, #720, #1156, #525, #319, #966, #161, #1302 ) ) ; +#1279 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .T. ) ; +#1280 = VERTEX_POINT ( 'NONE', #1392 ) ; +#1281 = CARTESIAN_POINT ( 'NONE', ( 1.186916062510447600E-015, -6.500000000000002700, 7.500000000000000000 ) ) ; +#1282 = DIRECTION ( 'NONE', ( 2.674581972639835600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1283 = ORIENTED_EDGE ( 'NONE', *, *, #1230, .F. ) ; +#1284 = ADVANCED_FACE ( 'NONE', ( #268, #287 ), #375, .F. ) ; +#1285 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 1.249999999999998900, 11.66689449165796300 ) ) ; +#1286 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1287 = CIRCLE ( 'NONE', #835, 2.500000000000000400 ) ; +#1288 = VERTEX_POINT ( 'NONE', #628 ) ; +#1289 = LINE ( 'NONE', #413, #1277 ) ; +#1290 = CARTESIAN_POINT ( 'NONE', ( -1.249999999999999800, -5.000000000000000900, 7.500000000000000000 ) ) ; +#1291 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.778091562876227700E-015, 1.000000000000000000 ) ) ; +#1292 = FACE_BOUND ( 'NONE', #188, .T. ) ; +#1293 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1294 = ORIENTED_EDGE ( 'NONE', *, *, #960, .F. ) ; +#1295 = ORIENTED_EDGE ( 'NONE', *, *, #1075, .T. ) ; +#1296 = PLANE ( 'NONE', #673 ) ; +#1297 = ORIENTED_EDGE ( 'NONE', *, *, #1107, .F. ) ; +#1298 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 4.931192660550443000, 6.020642201834881700 ) ) ; +#1299 = PLANE ( 'NONE', #546 ) ; +#1300 = ADVANCED_FACE ( 'NONE', ( #255 ), #1161, .F. ) ; +#1301 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, 1.749999999999999100, 12.16689449165796300 ) ) ; +#1302 = ORIENTED_EDGE ( 'NONE', *, *, #989, .T. ) ; +#1303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( 8.967906746253394300, -0.3350421788099773300, 6.250183057626278700 ) ) ; +#1305 = ORIENTED_EDGE ( 'NONE', *, *, #976, .T. ) ; +#1306 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1307 = PLANE ( 'NONE', #536 ) ; +#1308 = PLANE ( 'NONE', #760 ) ; +#1309 = FACE_OUTER_BOUND ( 'NONE', #47, .T. ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, 1.127964157109394800E-016, 3.749999999999998200 ) ) ; +#1311 = FACE_OUTER_BOUND ( 'NONE', #1010, .T. ) ; +#1312 = CIRCLE ( 'NONE', #840, 2.500000000000000400 ) ; +#1313 = CARTESIAN_POINT ( 'NONE', ( -6.032093253746607400, -0.3350421788099795500, 6.250183057626279600 ) ) ; +#1314 = ORIENTED_EDGE ( 'NONE', *, *, #1205, .T. ) ; +#1315 = ORIENTED_EDGE ( 'NONE', *, *, #1117, .F. ) ; +#1316 = DIRECTION ( 'NONE', ( 2.674581972639835600E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1317 = EDGE_LOOP ( 'NONE', ( #900, #58, #320, #693 ) ) ; +#1318 = ORIENTED_EDGE ( 'NONE', *, *, #1196, .F. ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -2.821742127331540700E-015, 7.500000000000000000 ) ) ; +#1320 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #418 ) ; +#1321 = ADVANCED_FACE ( 'NONE', ( #254 ), #239, .F. ) ; +#1322 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -6.500000000000000900, 3.750000000000000000 ) ) ; +#1323 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.289101893839308700E-017, 0.0000000000000000000 ) ) ; +#1324 = FACE_OUTER_BOUND ( 'NONE', #759, .T. ) ; +#1325 = APPROVAL_ROLE ( '' ) ; +#1326 = CARTESIAN_POINT ( 'NONE', ( -1.249999999999999800, -2.500000000000000400, 0.0000000000000000000 ) ) ; +#1327 = FACE_BOUND ( 'NONE', #186, .T. ) ; +#1328 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1329 = VECTOR ( 'NONE', #337, 1000.000000000000000 ) ; +#1330 = LINE ( 'NONE', #136, #1370 ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, 1.418012083223238500E-016, 2.660275264114820200 ) ) ; +#1332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1333 = ORIENTED_EDGE ( 'NONE', *, *, #1088, .F. ) ; +#1334 = ORIENTED_EDGE ( 'NONE', *, *, #680, .F. ) ; +#1335 = ORIENTED_EDGE ( 'NONE', *, *, #1050, .T. ) ; +#1336 = ADVANCED_FACE ( 'NONE', ( #313 ), #894, .T. ) ; +#1337 = ORIENTED_EDGE ( 'NONE', *, *, #1202, .T. ) ; +#1338 = ORIENTED_EDGE ( 'NONE', *, *, #1249, .F. ) ; +#1339 = LINE ( 'NONE', #1326, #1329 ) ; +#1340 = FACE_OUTER_BOUND ( 'NONE', #681, .T. ) ; +#1341 = FACE_OUTER_BOUND ( 'NONE', #12, .T. ) ; +#1342 = CARTESIAN_POINT ( 'NONE', ( 6.833110280777913400, -0.02249373289760792800, 2.130495048292799800 ) ) ; +#1343 = CARTESIAN_POINT ( 'NONE', ( -8.415063509461099000, -1.084787430682435600E-016, 2.500000000000000000 ) ) ; +#1344 = ADVANCED_FACE ( 'NONE', ( #270 ), #230, .T. ) ; +#1345 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1346 = EDGE_LOOP ( 'NONE', ( #16, #980, #974, #1477, #762, #332, #983, #172, #1188, #1350 ) ) ; +#1347 = ORIENTED_EDGE ( 'NONE', *, *, #24, .F. ) ; +#1348 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1349 = CARTESIAN_POINT ( 'NONE', ( 3.575196231792993000E-032, -2.773400806312566600E-015, 7.500000000000000000 ) ) ; +#1350 = ORIENTED_EDGE ( 'NONE', *, *, #1155, .T. ) ; +#1351 = CARTESIAN_POINT ( 'NONE', ( 9.110528091593927500E-031, -3.406337208876704400E-015, 2.500000000000000400 ) ) ; +#1352 = CYLINDRICAL_SURFACE ( 'NONE', #874, 0.5000000000000004400 ) ; +#1353 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -6.501000000000001200, 3.750000000000000000 ) ) ; +#1354 = FACE_OUTER_BOUND ( 'NONE', #163, .T. ) ; +#1355 = FACE_OUTER_BOUND ( 'NONE', #1413, .T. ) ; +#1356 = CYLINDRICAL_SURFACE ( 'NONE', #880, 2.500000000000000000 ) ; +#1357 = ORIENTED_EDGE ( 'NONE', *, *, #958, .F. ) ; +#1358 = CARTESIAN_POINT ( 'NONE', ( 10.91506350946110300, 6.918603989134388600E-016, 2.500000000000000400 ) ) ; +#1359 = ORIENTED_EDGE ( 'NONE', *, *, #1128, .T. ) ; +#1360 = ORIENTED_EDGE ( 'NONE', *, *, #936, .T. ) ; +#1361 = ADVANCED_FACE ( 'NONE', ( #238 ), #1299, .T. ) ; +#1362 = CARTESIAN_POINT ( 'NONE', ( -6.137911389899217700, -0.3348828897120943400, 1.250092839441484300 ) ) ; +#1363 = ORIENTED_EDGE ( 'NONE', *, *, #73, .F. ) ; +#1364 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1365 = EDGE_LOOP ( 'NONE', ( #820, #1295, #824 ) ) ; +#1366 = FACE_OUTER_BOUND ( 'NONE', #331, .T. ) ; +#1367 = ADVANCED_FACE ( 'NONE', ( #235 ), #221, .T. ) ; +#1368 = CARTESIAN_POINT ( 'NONE', ( 10.91506350946110100, 6.918603989134382700E-016, 4.999999999999999100 ) ) ; +#1369 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.500000000000002700, 7.500000000000000000 ) ) ; +#1370 = VECTOR ( 'NONE', #1150, 1000.000000000000000 ) ; +#1371 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1372 = FACE_OUTER_BOUND ( 'NONE', #363, .T. ) ; +#1373 = FACE_OUTER_BOUND ( 'NONE', #49, .T. ) ; +#1374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1375 = VERTEX_POINT ( 'NONE', #1036 ) ; +#1376 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.289101893839308700E-017, 0.0000000000000000000 ) ) ; +#1377 = ORIENTED_EDGE ( 'NONE', *, *, #1030, .F. ) ; +#1378 = VERTEX_POINT ( 'NONE', #1182 ) ; +#1379 = ORIENTED_EDGE ( 'NONE', *, *, #1060, .T. ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -2.500000000000002700, 4.999999999999999100 ) ) ; +#1381 = DIRECTION ( 'NONE', ( 2.674581972639835100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1382 = ORIENTED_EDGE ( 'NONE', *, *, #1090, .T. ) ; +#1383 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839307700E-017, -0.0000000000000000000 ) ) ; +#1384 = DIRECTION ( 'NONE', ( 1.826024711554534200E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1385 = VECTOR ( 'NONE', #2, 1000.000000000000000 ) ; +#1386 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -0.5951532544552892200, 0.0000000000000000000 ) ) ; +#1387 = LINE ( 'NONE', #928, #1385 ) ; +#1388 = CIRCLE ( 'NONE', #913, 2.500000000000000400 ) ; +#1389 = CIRCLE ( 'NONE', #883, 2.500000000000000000 ) ; +#1390 = VERTEX_POINT ( 'NONE', #182 ) ; +#1391 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#1392 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.882975897653517600E-015, 2.500000000000000400 ) ) ; +#1393 = ORIENTED_EDGE ( 'NONE', *, *, #1245, .T. ) ; +#1394 = VERTEX_POINT ( 'NONE', #282 ) ; +#1395 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1396 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1397 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1398 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -6.500000000000000900, 0.0000000000000000000 ) ) ; +#1399 = ORIENTED_EDGE ( 'NONE', *, *, #1009, .T. ) ; +#1400 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.289101893839307700E-017, 0.0000000000000000000 ) ) ; +#1401 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -0.7159699472033497200, 7.902722309160207500 ) ) ; +#1402 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#1403 = VECTOR ( 'NONE', #404, 1000.000000000000000 ) ; +#1404 = CIRCLE ( 'NONE', #890, 1.200000000000000600 ) ; +#1405 = LINE ( 'NONE', #86, #1403 ) ; +#1406 = CYLINDRICAL_SURFACE ( 'NONE', #905, 2.500000000000001300 ) ; +#1407 = CARTESIAN_POINT ( 'NONE', ( 9.610305918072684900, -0.2578099175551504800, 6.107577731061185000 ) ) ; +#1408 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1409 = CARTESIAN_POINT ( 'NONE', ( 3.575196231792993000E-032, -2.773400806312566600E-015, 4.999999999999999100 ) ) ; +#1410 = VERTEX_POINT ( 'NONE', #395 ) ; +#1411 = EDGE_LOOP ( 'NONE', ( #408, #597, #1335 ) ) ; +#1412 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1413 = EDGE_LOOP ( 'NONE', ( #388, #226, #1511, #1478 ) ) ; +#1414 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.289101893839308700E-017, 0.0000000000000000000 ) ) ; +#1415 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1416 = CARTESIAN_POINT ( 'NONE', ( -5.389694081927316900, -0.2578099175551527000, 6.107577731061184100 ) ) ; +#1417 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.000000000000000000, 2.660275264114828600 ) ) ; +#1418 = CARTESIAN_POINT ( 'NONE', ( 3.222754734598273500E-017, -2.500000000000002700, 7.500000000000000000 ) ) ; +#1419 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ; +#1420 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1421 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1422 = FACE_OUTER_BOUND ( 'NONE', #1278, .T. ) ; +#1423 = CIRCLE ( 'NONE', #898, 5.000000000000000000 ) ; +#1424 = FACE_OUTER_BOUND ( 'NONE', #1465, .T. ) ; +#1425 = APPROVAL_ROLE ( '' ) ; +#1426 = VECTOR ( 'NONE', #177, 1000.000000000000000 ) ; +#1427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1428 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1429 = ORIENTED_EDGE ( 'NONE', *, *, #1222, .T. ) ; +#1430 = CARTESIAN_POINT ( 'NONE', ( -8.170502091684525700, -0.02182779442324271300, 5.365290569507363800 ) ) ; +#1431 = ORIENTED_EDGE ( 'NONE', *, *, #981, .F. ) ; +#1432 = CARTESIAN_POINT ( 'NONE', ( 3.575196231792993000E-032, -2.773400806312566600E-015, 7.500000000000000000 ) ) ; +#1433 = ORIENTED_EDGE ( 'NONE', *, *, #211, .F. ) ; +#1434 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #917, 'distance_accuracy_value', 'NONE'); +#1435 = VERTEX_POINT ( 'NONE', #532 ) ; +#1436 = CLOSED_SHELL ( 'NONE', ( #473, #1126, #502, #440, #1336, #150, #1251, #1447, #881, #724, #250, #371, #1260, #831, #1361, #335, #1468, #987, #300, #60, #735, #858, #846, #964, #795, #946, #159, #1236, #1344, #1482, #1020, #1284, #43, #1321, #1266, #1300, #244, #352, #599, #1367, #1458, #234 ) ) ; +#1437 = VECTOR ( 'NONE', #104, 1000.000000000000000 ) ; +#1438 = CIRCLE ( 'NONE', #915, 2.500000000000000000 ) ; +#1439 = VECTOR ( 'NONE', #1184, 1000.000000000000000 ) ; +#1440 = LINE ( 'NONE', #1063, #1439 ) ; +#1441 = ORIENTED_EDGE ( 'NONE', *, *, #1214, .T. ) ; +#1442 = ORIENTED_EDGE ( 'NONE', *, *, #1118, .F. ) ; +#1443 = CARTESIAN_POINT ( 'NONE', ( 6.584936490538902700, -4.662675674915599000E-016, 2.500000000000000400 ) ) ; +#1444 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -1.095736609763411700E-016, 4.839724735885170900 ) ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( 8.750000000000001800, -6.500000000000000900, 3.749999999999998200 ) ) ; +#1446 = LINE ( 'NONE', #96, #1426 ) ; +#1447 = ADVANCED_FACE ( 'NONE', ( #223 ), #1307, .F. ) ; +#1448 = VECTOR ( 'NONE', #80, 1000.000000000000000 ) ; +#1449 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1450 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3, + ( #1139, #361, #401, #772, #81, #902, #183, #1038, #283, #1185, #397, #1304, #529, #1407, #652, #1501, #778, #87, #908, #190 ), + .UNSPECIFIED., .F., .F., + ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 4 ), + ( 5.851374521993966300E-022, 0.0006566826780645896200, 0.001313365356129179200, 0.001970048034193768800, 0.002298389373226066000, 0.002626730712258363300, 0.003283413390322963400, 0.003940096068387563500, 0.004596778746452163300, 0.005253461424516763800 ), + .UNSPECIFIED. ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -6.500000000000000900, 7.500000000000000000 ) ) ; +#1452 = LINE ( 'NONE', #1417, #1448 ) ; +#1453 = ORIENTED_EDGE ( 'NONE', *, *, #960, .T. ) ; +#1454 = CARTESIAN_POINT ( 'NONE', ( 11.00000000000000000, -2.500000000000000400, 2.500000000000000400 ) ) ; +#1455 = ORIENTED_EDGE ( 'NONE', *, *, #1220, .F. ) ; +#1456 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 1.749999999999999100, 11.66689449165796300 ) ) ; +#1457 = LINE ( 'NONE', #68, #1437 ) ; +#1458 = ADVANCED_FACE ( 'NONE', ( #257 ), #210, .T. ) ; +#1459 = CARTESIAN_POINT ( 'NONE', ( 7.550000000000001600, -2.000000000000000000, 3.749999999999998200 ) ) ; +#1460 = ORIENTED_EDGE ( 'NONE', *, *, #1249, .T. ) ; +#1461 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1462 = EDGE_LOOP ( 'NONE', ( #1472, #490, #34, #198 ) ) ; +#1463 = ORIENTED_EDGE ( 'NONE', *, *, #1158, .T. ) ; +#1464 = CARTESIAN_POINT ( 'NONE', ( -6.685789246498734100, -0.3177888005479394500, 1.278484925536048900 ) ) ; +#1465 = EDGE_LOOP ( 'NONE', ( #500, #1134, #648, #483, #1113, #1013 ) ) ; +#1466 = DIRECTION ( 'NONE', ( -1.289101893839307700E-017, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1467 = EDGE_LOOP ( 'NONE', ( #240, #1360, #32, #629 ) ) ; +#1468 = ADVANCED_FACE ( 'NONE', ( #253 ), #537, .F. ) ; +#1469 = EDGE_LOOP ( 'NONE', ( #232, #379, #1505, #669 ) ) ; +#1470 = VERTEX_POINT ( 'NONE', #407 ) ; +#1471 = CARTESIAN_POINT ( 'NONE', ( -3.750000000000000000, -2.500000000000002700, 0.0000000000000000000 ) ) ; +#1472 = ORIENTED_EDGE ( 'NONE', *, *, #1099, .T. ) ; +#1473 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000900, -2.000000000000000000, 3.749999999999998200 ) ) ; +#1474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1475 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1476 = EDGE_LOOP ( 'NONE', ( #427, #615, #1347, #1500 ) ) ; +#1477 = ORIENTED_EDGE ( 'NONE', *, *, #1140, .T. ) ; +#1478 = ORIENTED_EDGE ( 'NONE', *, *, #416, .T. ) ; +#1479 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .T. ) ; +#1480 = ORIENTED_EDGE ( 'NONE', *, *, #248, .F. ) ; +#1481 = ORIENTED_EDGE ( 'NONE', *, *, #1247, .F. ) ; +#1482 = ADVANCED_FACE ( 'NONE', ( #220 ), #196, .F. ) ; +#1483 = VERTEX_POINT ( 'NONE', #1055 ) ; +#1484 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1485 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#1487 = VERTEX_POINT ( 'NONE', #294 ) ; +#1488 = EDGE_LOOP ( 'NONE', ( #364, #548, #1315, #1442 ) ) ; +#1489 = CARTESIAN_POINT ( 'NONE', ( 6.250000000000000000, 4.073161478902411800, 9.339461736991921700 ) ) ; +#1490 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#1491 = ORIENTED_EDGE ( 'NONE', *, *, #1166, .F. ) ; +#1492 = EDGE_LOOP ( 'NONE', ( #1073, #1504, #558 ) ) ; +#1493 = DIRECTION ( 'NONE', ( -1.000000000000000000, -2.674581972639835600E-016, 0.0000000000000000000 ) ) ; +#1494 = CARTESIAN_POINT ( 'NONE', ( -8.500000000000000000, -2.500000000000002700, 4.999999999999999100 ) ) ; +#1495 = ORIENTED_EDGE ( 'NONE', *, *, #1097, .F. ) ; +#1496 = ORIENTED_EDGE ( 'NONE', *, *, #1179, .T. ) ; +#1497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1499 = ORIENTED_EDGE ( 'NONE', *, *, #1054, .F. ) ; +#1500 = ORIENTED_EDGE ( 'NONE', *, *, #306, .F. ) ; +#1501 = CARTESIAN_POINT ( 'NONE', ( 10.18681743993772700, -0.1310893946886539900, 5.807401530898662400 ) ) ; +#1502 = DIRECTION ( 'NONE', ( -1.289101893839307900E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -8.056886836495674800E-017, 3.750000000000000000 ) ) ; +#1504 = ORIENTED_EDGE ( 'NONE', *, *, #969, .F. ) ; +#1505 = ORIENTED_EDGE ( 'NONE', *, *, #943, .T. ) ; +#1506 = CARTESIAN_POINT ( 'NONE', ( -6.250000000000000000, -2.000000000000000000, 3.750000000000000000 ) ) ; +#1507 = ORIENTED_EDGE ( 'NONE', *, *, #1060, .F. ) ; +#1508 = PLANE ( 'NONE', #837 ) ; +#1509 = ORIENTED_EDGE ( 'NONE', *, *, #1140, .F. ) ; +#1510 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1511 = ORIENTED_EDGE ( 'NONE', *, *, #1202, .F. ) ; +#1512 = ORIENTED_EDGE ( 'NONE', *, *, #392, .F. ) ; +#1513 = VERTEX_POINT ( 'NONE', #411 ) ; +#1514 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -6.500000000000000900, 0.0000000000000000000 ) ) ; +#1515 = ORIENTED_EDGE ( 'NONE', *, *, #1040, .T. ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Spring.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Spring.step new file mode 100644 index 0000000..b89c125 --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Spring.step @@ -0,0 +1,1586 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger_Spring.STEP', + '2013-11-14T05:08:11', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = VECTOR ( 'NONE', #634, 1000.000000000000000 ) ; +#2 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -1.250000000000000200 ) ) ; +#3 = CIRCLE ( 'NONE', #392, 1.250000000000001100 ) ; +#4 = VECTOR ( 'NONE', #748, 1000.000000000000000 ) ; +#5 = PLANE ( 'NONE', #800 ) ; +#6 = LINE ( 'NONE', #472, #1 ) ; +#7 = VECTOR ( 'NONE', #462, 1000.000000000000000 ) ; +#8 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -2.500000000000000400, 6.000000000000000000 ) ) ; +#9 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -2.250000000000000400 ) ) ; +#10 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427522200E-017, -7.500000000000000000, 8.500000000000000000 ) ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, -25.93074902771996500, -14.73205080756885900 ) ) ; +#12 = CIRCLE ( 'NONE', #399, 3.249999999999997800 ) ; +#13 = EDGE_LOOP ( 'NONE', ( #830, #587, #713, #592 ) ) ; +#14 = LINE ( 'NONE', #1012, #4 ) ; +#15 = EDGE_LOOP ( 'NONE', ( #806, #808, #809, #811, #813 ) ) ; +#16 = CIRCLE ( 'NONE', #405, 3.249999999999997800 ) ; +#17 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 5.000000000000000000 ) ) ; +#18 = VECTOR ( 'NONE', #646, 1000.000000000000000 ) ; +#19 = CIRCLE ( 'NONE', #403, 1.250000000000001100 ) ; +#20 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#21 = LINE ( 'NONE', #1420, #18 ) ; +#22 = CIRCLE ( 'NONE', #411, 3.249999999999998700 ) ; +#23 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#24 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#25 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#26 = CARTESIAN_POINT ( 'NONE', ( -6.181694990624912100, -2.499999999999998700, -0.8333333333333334800 ) ) ; +#27 = VECTOR ( 'NONE', #146, 1000.000000000000000 ) ; +#28 = CARTESIAN_POINT ( 'NONE', ( 1.249000902703301100E-014, 2.500000000000000000, -17.99999999999999600 ) ) ; +#29 = CIRCLE ( 'NONE', #416, 3.249999999999997800 ) ; +#30 = LINE ( 'NONE', #1302, #7 ) ; +#31 = CIRCLE ( 'NONE', #423, 2.249999999999999600 ) ; +#32 = CIRCLE ( 'NONE', #424, 2.249999999999998700 ) ; +#33 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#34 = CIRCLE ( 'NONE', #426, 2.250000000000000400 ) ; +#35 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#36 = CIRCLE ( 'NONE', #433, 2.249999999999996900 ) ; +#37 = VECTOR ( 'NONE', #147, 1000.000000000000000 ) ; +#38 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, 2.500000000000000000, 6.000000000000000000 ) ) ; +#39 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999999100, -2.500000000000000000, 2.500000000000000400 ) ) ; +#40 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#41 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -25.93074902771996500, -16.99999999999999600 ) ) ; +#42 = VECTOR ( 'NONE', #853, 1000.000000000000000 ) ; +#43 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999988500, -2.499999999999998700, -16.23861278752582000 ) ) ; +#44 = LINE ( 'NONE', #880, #27 ) ; +#45 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, 2.500000000000000000, -13.49999999999999600 ) ) ; +#46 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -25.93074902771996500, -16.23861278752582000 ) ) ; +#47 = LINE ( 'NONE', #28, #42 ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#49 = CIRCLE ( 'NONE', #438, 2.250000000000001800 ) ; +#50 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#51 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -7.500000000000000000, 5.000000000000000000 ) ) ; +#52 = CIRCLE ( 'NONE', #442, 2.250000000000001800 ) ; +#53 = CIRCLE ( 'NONE', #450, 2.249999999999998700 ) ; +#54 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#55 = CARTESIAN_POINT ( 'NONE', ( -5.999999999999991100, -25.93074902771996500, -16.99999999999999600 ) ) ; +#56 = LINE ( 'NONE', #1050, #1496 ) ; +#57 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884037400E-016, -2.500000000000000000, 2.500000000000000400 ) ) ; +#59 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#60 = CARTESIAN_POINT ( 'NONE', ( 2.180415093947894300, -25.93074902771996500, -14.56777736655967600 ) ) ; +#61 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -4.499999999999999100 ) ) ; +#62 = VECTOR ( 'NONE', #985, 1000.000000000000000 ) ; +#63 = LINE ( 'NONE', #1380, #62 ) ; +#64 = CIRCLE ( 'NONE', #449, 2.250000000000000400 ) ; +#65 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000900, -25.93074902771996500, -1.250000000000000400 ) ) ; +#66 = CIRCLE ( 'NONE', #447, 2.249999999999996900 ) ; +#67 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999985800, 2.500000000000000000, -18.00000000000000400 ) ) ; +#68 = CIRCLE ( 'NONE', #461, 7.500000000000000000 ) ; +#69 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#70 = CIRCLE ( 'NONE', #457, 2.249999999999999600 ) ; +#71 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -2.499999999999998700, -17.99999999999999600 ) ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -25.93074902771996500, -11.25000000000000000 ) ) ; +#73 = VECTOR ( 'NONE', #742, 1000.000000000000000 ) ; +#74 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#75 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#76 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#77 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( 5.999999999999989300, 2.500000000000000000, -16.99999999999999600 ) ) ; +#79 = CIRCLE ( 'NONE', #464, 7.500000000000000000 ) ; +#80 = VERTEX_POINT ( 'NONE', #173 ) ; +#81 = CIRCLE ( 'NONE', #476, 2.500000000000000400 ) ; +#82 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999997300, 2.500000000000000000, -7.749999999999997300 ) ) ; +#83 = VECTOR ( 'NONE', #1298, 1000.000000000000000 ) ; +#84 = CIRCLE ( 'NONE', #480, 2.500000000000000400 ) ; +#85 = LINE ( 'NONE', #38, #83 ) ; +#86 = LINE ( 'NONE', #465, #73 ) ; +#87 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#88 = VERTEX_POINT ( 'NONE', #1068 ) ; +#89 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#90 = VECTOR ( 'NONE', #340, 1000.000000000000000 ) ; +#91 = CIRCLE ( 'NONE', #482, 1.249999999999999800 ) ; +#92 = CIRCLE ( 'NONE', #492, 3.249999999999998700 ) ; +#93 = CIRCLE ( 'NONE', #502, 3.249999999999997800 ) ; +#94 = VECTOR ( 'NONE', #1146, 1000.000000000000000 ) ; +#95 = CIRCLE ( 'NONE', #505, 0.5000000000000004400 ) ; +#96 = LINE ( 'NONE', #1288, #94 ) ; +#97 = CIRCLE ( 'NONE', #496, 1.250000000000001100 ) ; +#98 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#99 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 2.500000000000000400 ) ) ; +#101 = VECTOR ( 'NONE', #304, 1000.000000000000000 ) ; +#102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#103 = CIRCLE ( 'NONE', #514, 0.5000000000000004400 ) ; +#104 = CIRCLE ( 'NONE', #509, 0.5000000000000004400 ) ; +#105 = CIRCLE ( 'NONE', #518, 3.249999999999997800 ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#107 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#108 = CIRCLE ( 'NONE', #527, 0.5000000000000000000 ) ; +#109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#110 = LINE ( 'NONE', #1137, #101 ) ; +#111 = CIRCLE ( 'NONE', #535, 2.500000000000000400 ) ; +#112 = VECTOR ( 'NONE', #1030, 1000.000000000000000 ) ; +#113 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#114 = CIRCLE ( 'NONE', #537, 0.5000000000000000000 ) ; +#115 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, -2.499999999999998700, -0.5000000000000000000 ) ) ; +#116 = CIRCLE ( 'NONE', #529, 1.250000000000001100 ) ; +#117 = CIRCLE ( 'NONE', #543, 1.249999999999999800 ) ; +#118 = CIRCLE ( 'NONE', #550, 0.5000000000000000000 ) ; +#119 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, 2.499999999999998700, -14.73205080756885900 ) ) ; +#120 = VECTOR ( 'NONE', #1182, 1000.000000000000000 ) ; +#121 = LINE ( 'NONE', #48, #120 ) ; +#122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, 2.500000000000000000, -17.99999999999999600 ) ) ; +#124 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #367 ) ; +#125 = CIRCLE ( 'NONE', #559, 1.249999999999999600 ) ; +#126 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -2.499999999999998700, -16.74999999999999300 ) ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -2.499999999999998700, -17.99999999999999600 ) ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -8.597800040494614000E-016 ) ) ; +#130 = VECTOR ( 'NONE', #1174, 1000.000000000000000 ) ; +#131 = CIRCLE ( 'NONE', #555, 0.5000000000000000000 ) ; +#132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#133 = VECTOR ( 'NONE', #1412, 1000.000000000000000 ) ; +#134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#135 = CIRCLE ( 'NONE', #540, 3.249999999999998700 ) ; +#136 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#137 = VECTOR ( 'NONE', #333, 1000.000000000000000 ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -2.168404344971008900E-016 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -4.499999999999999100 ) ) ; +#140 = LINE ( 'NONE', #475, #130 ) ; +#141 = VECTOR ( 'NONE', #796, 1000.000000000000000 ) ; +#142 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#143 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, 2.500000000000000000, -17.99999999999999600 ) ) ; +#145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#146 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#147 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, 2.499999999999998700, -0.5000000000000000000 ) ) ; +#149 = EDGE_LOOP ( 'NONE', ( #1193, #1196, #1199, #1203 ) ) ; +#150 = LINE ( 'NONE', #532, #133 ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( -5.999999999999991100, -2.499999999999998700, -16.99999999999999600 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -25.93074902771996500, -10.24999999999999800 ) ) ; +#153 = LINE ( 'NONE', #928, #141 ) ; +#154 = CIRCLE ( 'NONE', #560, 1.250000000000001100 ) ; +#155 = CIRCLE ( 'NONE', #563, 3.249999999999997800 ) ; +#156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#157 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000900, -2.500000000000000000, 10.00000000000000000 ) ) ; +#158 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#159 = CIRCLE ( 'NONE', #565, 3.249999999999997800 ) ; +#160 = VECTOR ( 'NONE', #265, 1000.000000000000000 ) ; +#161 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#162 = CIRCLE ( 'NONE', #567, 1.250000000000001100 ) ; +#163 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -2.499999999999998700, -8.999999999999998200 ) ) ; +#164 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -8.597800040494614000E-016 ) ) ; +#165 = CARTESIAN_POINT ( 'NONE', ( 2.180415093947895200, 2.500000000000000000, -14.56777736655967600 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -13.49999999999999600 ) ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -25.93074902771996500, -13.49999999999999600 ) ) ; +#168 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -6.938893903907231300E-016 ) ) ; +#169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#171 = VECTOR ( 'NONE', #1064, 1000.000000000000000 ) ; +#172 = LINE ( 'NONE', #524, #137 ) ; +#173 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, 2.500000000000000000, -16.99999999999999600 ) ) ; +#174 = LINE ( 'NONE', #1539, #171 ) ; +#175 = CIRCLE ( 'NONE', #578, 3.249999999999998700 ) ; +#176 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, 2.500000000000000000, -10.24999999999999800 ) ) ; +#177 = CIRCLE ( 'NONE', #580, 1.250000000000001100 ) ; +#178 = LINE ( 'NONE', #665, #160 ) ; +#179 = VECTOR ( 'NONE', #901, 1000.000000000000000 ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 2.180415093947895200, -2.499999999999998700, -14.56777736655967600 ) ) ; +#181 = PLANE ( 'NONE', #741 ) ; +#182 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #279 ) ; +#183 = CIRCLE ( 'NONE', #586, 0.5000000000000004400 ) ; +#184 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#185 = LINE ( 'NONE', #1326, #179 ) ; +#186 = CIRCLE ( 'NONE', #582, 3.249999999999997800 ) ; +#187 = VECTOR ( 'NONE', #362, 1000.000000000000000 ) ; +#188 = LINE ( 'NONE', #157, #187 ) ; +#189 = CIRCLE ( 'NONE', #588, 2.500000000000000400 ) ; +#190 = VECTOR ( 'NONE', #1208, 1000.000000000000000 ) ; +#191 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#192 = CIRCLE ( 'NONE', #593, 2.249999999999999600 ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, -25.93074902771996500, -0.5000000000000000000 ) ) ; +#194 = LINE ( 'NONE', #511, #190 ) ; +#195 = CIRCLE ( 'NONE', #595, 2.249999999999998700 ) ; +#196 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#197 = CIRCLE ( 'NONE', #603, 2.249999999999996900 ) ; +#198 = VECTOR ( 'NONE', #168, 1000.000000000000000 ) ; +#199 = CIRCLE ( 'NONE', #605, 2.250000000000001800 ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, 2.500000000000000000, -10.24999999999999800 ) ) ; +#201 = LINE ( 'NONE', #622, #198 ) ; +#202 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#203 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -25.93074902771996500, -17.99999999999999600 ) ) ; +#204 = CIRCLE ( 'NONE', #601, 2.250000000000000400 ) ; +#205 = CIRCLE ( 'NONE', #609, 2.250000000000001800 ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.500000000000000400, 5.000000000000000000 ) ) ; +#207 = CIRCLE ( 'NONE', #614, 2.249999999999996900 ) ; +#208 = CIRCLE ( 'NONE', #617, 2.250000000000000400 ) ; +#209 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, -2.499999999999998700, -15.23205080756885900 ) ) ; +#210 = CIRCLE ( 'NONE', #627, 2.249999999999999600 ) ; +#211 = CIRCLE ( 'NONE', #629, 7.500000000000000000 ) ; +#212 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#213 = VECTOR ( 'NONE', #1000, 1000.000000000000000 ) ; +#214 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, 2.500000000000000000, -8.999999999999998200 ) ) ; +#215 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#216 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#217 = CIRCLE ( 'NONE', #631, 7.500000000000000000 ) ; +#218 = PLANE ( 'NONE', #719 ) ; +#219 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427522200E-017, 2.500000000000000000, 6.000000000000000000 ) ) ; +#220 = VERTEX_POINT ( 'NONE', #288 ) ; +#221 = VECTOR ( 'NONE', #612, 1000.000000000000000 ) ; +#222 = CIRCLE ( 'NONE', #621, 2.249999999999998700 ) ; +#223 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#224 = LINE ( 'NONE', #1501, #221 ) ; +#225 = LINE ( 'NONE', #1319, #1550 ) ; +#226 = PLANE ( 'NONE', #705 ) ; +#227 = VECTOR ( 'NONE', #738, 1000.000000000000000 ) ; +#228 = CIRCLE ( 'NONE', #667, 2.500000000000000400 ) ; +#229 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, 2.500000000000000000, -13.49999999999999600 ) ) ; +#230 = VECTOR ( 'NONE', #857, 1000.000000000000000 ) ; +#231 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#232 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, 2.500000000000000000, -13.49999999999999600 ) ) ; +#233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#234 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#235 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999987600, -25.93074902771996500, -16.74999999999999300 ) ) ; +#236 = LINE ( 'NONE', #739, #230 ) ; +#237 = DIRECTION ( 'NONE', ( -2.775557561562889000E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#238 = VERTEX_POINT ( 'NONE', #1271 ) ; +#239 = VECTOR ( 'NONE', #852, 1000.000000000000000 ) ; +#240 = LINE ( 'NONE', #216, #239 ) ; +#241 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#242 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#243 = VECTOR ( 'NONE', #615, 1000.000000000000000 ) ; +#244 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#245 = LINE ( 'NONE', #1502, #243 ) ; +#246 = VECTOR ( 'NONE', #1149, 1000.000000000000000 ) ; +#247 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -25.93074902771996500, -16.99999999999999600 ) ) ; +#248 = LINE ( 'NONE', #127, #213 ) ; +#249 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -4.499999999999999100 ) ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -2.499999999999998700, -8.999999999999998200 ) ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -25.93074902771996500, -13.49999999999999600 ) ) ; +#253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#254 = VECTOR ( 'NONE', #122, 1000.000000000000000 ) ; +#255 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#256 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#257 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#258 = LINE ( 'NONE', #1289, #227 ) ; +#259 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 10.00000000000000000 ) ) ; +#261 = VECTOR ( 'NONE', #732, 1000.000000000000000 ) ; +#262 = LINE ( 'NONE', #1498, #246 ) ; +#263 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#264 = VECTOR ( 'NONE', #202, 1000.000000000000000 ) ; +#265 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#266 = CYLINDRICAL_SURFACE ( 'NONE', #636, 7.500000000000000000 ) ; +#267 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#268 = LINE ( 'NONE', #832, #254 ) ; +#269 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -2.499999999999998700, -16.99999999999999600 ) ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -13.49999999999999600 ) ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999990200, -2.499999999999998700, -15.74999999999999300 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, -2.500000000000000000, 0.0000000000000000000 ) ) ; +#274 = FACE_OUTER_BOUND ( 'NONE', #1527, .T. ) ; +#275 = CYLINDRICAL_SURFACE ( 'NONE', #648, 2.500000000000000400 ) ; +#276 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#277 = CIRCLE ( 'NONE', #639, 2.500000000000000400 ) ; +#278 = CYLINDRICAL_SURFACE ( 'NONE', #649, 3.249999999999997800 ) ; +#279 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#280 = LINE ( 'NONE', #10, #264 ) ; +#281 = CYLINDRICAL_SURFACE ( 'NONE', #651, 0.5000000000000004400 ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -7.500000000000000000, 6.000000000000000000 ) ) ; +#283 = FACE_OUTER_BOUND ( 'NONE', #1549, .T. ) ; +#284 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#285 = CYLINDRICAL_SURFACE ( 'NONE', #652, 2.249999999999999600 ) ; +#286 = FACE_OUTER_BOUND ( 'NONE', #700, .T. ) ; +#287 = CYLINDRICAL_SURFACE ( 'NONE', #660, 0.5000000000000004400 ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -10.24999999999999800 ) ) ; +#289 = FACE_OUTER_BOUND ( 'NONE', #1562, .T. ) ; +#290 = CYLINDRICAL_SURFACE ( 'NONE', #662, 0.5000000000000000000 ) ; +#291 = LINE ( 'NONE', #106, #261 ) ; +#292 = FACE_OUTER_BOUND ( 'NONE', #1411, .T. ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999985800, -2.499999999999998700, -18.00000000000000400 ) ) ; +#294 = FACE_OUTER_BOUND ( 'NONE', #885, .T. ) ; +#295 = FACE_OUTER_BOUND ( 'NONE', #745, .T. ) ; +#296 = FACE_OUTER_BOUND ( 'NONE', #982, .T. ) ; +#297 = FACE_OUTER_BOUND ( 'NONE', #625, .T. ) ; +#298 = FACE_BOUND ( 'NONE', #1348, .T. ) ; +#299 = CYLINDRICAL_SURFACE ( 'NONE', #678, 1.249999999999999800 ) ; +#300 = VERTEX_POINT ( 'NONE', #786 ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 1.925929944387235900E-031, 2.500000000000000000, 2.500000000000000400 ) ) ; +#302 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#303 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #944 ) ) ; +#304 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#305 = FACE_BOUND ( 'NONE', #1462, .T. ) ; +#306 = DIRECTION ( 'NONE', ( 7.709882115452474200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#307 = CYLINDRICAL_SURFACE ( 'NONE', #683, 1.250000000000001100 ) ; +#308 = CC_DESIGN_SECURITY_CLASSIFICATION ( #324, ( #346 ) ) ; +#309 = FACE_BOUND ( 'NONE', #680, .T. ) ; +#310 = CYLINDRICAL_SURFACE ( 'NONE', #686, 3.249999999999997800 ) ; +#311 = CC_DESIGN_APPROVAL ( #314, ( #324 ) ) ; +#312 = VECTOR ( 'NONE', #136, 1000.000000000000000 ) ; +#313 = FACE_OUTER_BOUND ( 'NONE', #1508, .T. ) ; +#314 = APPROVAL ( #1463, 'UNSPECIFIED' ) ; +#315 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#316 = CYLINDRICAL_SURFACE ( 'NONE', #692, 3.249999999999998700 ) ; +#317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#318 = FACE_OUTER_BOUND ( 'NONE', #1391, .T. ) ; +#319 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #986, #553, ( #324 ) ) ; +#320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, -25.93074902771996500, -14.73205080756885900 ) ) ; +#322 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1032, #1354, ( #324 ) ) ; +#323 = DIRECTION ( 'NONE', ( 2.668805347656628100E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#324 = SECURITY_CLASSIFICATION ( '', '', #390 ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#326 = CYLINDRICAL_SURFACE ( 'NONE', #694, 3.249999999999998700 ) ; +#327 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1034, #1240, ( #346 ) ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -25.93074902771996500, -13.49999999999999600 ) ) ; +#329 = FACE_BOUND ( 'NONE', #805, .T. ) ; +#330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#331 = FACE_OUTER_BOUND ( 'NONE', #1159, .T. ) ; +#332 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#333 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#334 = FACE_OUTER_BOUND ( 'NONE', #1432, .T. ) ; +#335 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1058, #284, ( #346 ) ) ; +#336 = CYLINDRICAL_SURFACE ( 'NONE', #710, 2.249999999999999600 ) ; +#337 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427522200E-017, -2.500000000000000400, 6.000000000000000000 ) ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, 2.500000000000000000, -8.999999999999998200 ) ) ; +#339 = CC_DESIGN_APPROVAL ( #343, ( #346 ) ) ; +#340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#341 = FACE_OUTER_BOUND ( 'NONE', #1524, .T. ) ; +#342 = VERTEX_POINT ( 'NONE', #669 ) ; +#343 = APPROVAL ( #184, 'UNSPECIFIED' ) ; +#344 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#345 = LINE ( 'NONE', #46, #1531 ) ; +#346 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #944, .NOT_KNOWN. ) ; +#347 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#348 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #1104, #939, ( #367 ) ) ; +#349 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -2.500000000000000000, 5.000000000000000000 ) ) ; +#350 = CYLINDRICAL_SURFACE ( 'NONE', #712, 2.250000000000001800 ) ; +#351 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1129, #89, ( #367 ) ) ; +#352 = FACE_OUTER_BOUND ( 'NONE', #1165, .T. ) ; +#353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#354 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#355 = FACE_OUTER_BOUND ( 'NONE', #645, .T. ) ; +#356 = CYLINDRICAL_SURFACE ( 'NONE', #721, 2.500000000000000400 ) ; +#357 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#358 = FACE_OUTER_BOUND ( 'NONE', #1555, .T. ) ; +#359 = CC_DESIGN_APPROVAL ( #364, ( #367 ) ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999984000, 2.500000000000000000, -18.00000000000000000 ) ) ; +#361 = CYLINDRICAL_SURFACE ( 'NONE', #724, 2.250000000000000400 ) ; +#362 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#363 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#364 = APPROVAL ( #1560, 'UNSPECIFIED' ) ; +#365 = FACE_OUTER_BOUND ( 'NONE', #1566, .T. ) ; +#366 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -1.250000000000000200 ) ) ; +#367 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #346, #816 ) ; +#368 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #1206, #545, ( #944 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999995600, 2.500000000000000000, -11.24999999999999800 ) ) ; +#370 = AXIS2_PLACEMENT_3D ( 'NONE', #1231, #1233, #386 ) ; +#371 = FACE_OUTER_BOUND ( 'NONE', #961, .T. ) ; +#372 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#373 = CYLINDRICAL_SURFACE ( 'NONE', #730, 7.500000000000000000 ) ; +#374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#375 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, 2.500000000000000000, -15.23205080756885900 ) ) ; +#376 = FACE_OUTER_BOUND ( 'NONE', #1547, .T. ) ; +#377 = CYLINDRICAL_SURFACE ( 'NONE', #736, 2.249999999999998700 ) ; +#378 = FACE_OUTER_BOUND ( 'NONE', #13, .T. ) ; +#379 = FACE_OUTER_BOUND ( 'NONE', #542, .T. ) ; +#380 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, 2.500000000000000000, -7.749999999999996400 ) ) ; +#381 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#382 = CYLINDRICAL_SURFACE ( 'NONE', #743, 3.249999999999997800 ) ; +#383 = DIRECTION ( 'NONE', ( -6.938893903907231300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#384 = VECTOR ( 'NONE', #1421, 1000.000000000000000 ) ; +#385 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #965 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1554, #801, #87 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#386 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#387 = AXIS2_PLACEMENT_3D ( 'NONE', #788, #76, #920 ) ; +#388 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#389 = AXIS2_PLACEMENT_3D ( 'NONE', #656, #1533, #775 ) ; +#390 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#391 = FACE_OUTER_BOUND ( 'NONE', #952, .T. ) ; +#392 = AXIS2_PLACEMENT_3D ( 'NONE', #144, #1021, #237 ) ; +#393 = CYLINDRICAL_SURFACE ( 'NONE', #747, 2.249999999999996900 ) ; +#394 = ADVANCED_FACE ( 'NONE', ( #498 ), #519, .F. ) ; +#395 = FACE_OUTER_BOUND ( 'NONE', #599, .T. ) ; +#396 = CYLINDRICAL_SURFACE ( 'NONE', #750, 2.249999999999998700 ) ; +#397 = FACE_OUTER_BOUND ( 'NONE', #717, .T. ) ; +#398 = FACE_OUTER_BOUND ( 'NONE', #1538, .T. ) ; +#399 = AXIS2_PLACEMENT_3D ( 'NONE', #232, #1170, #330 ) ; +#400 = ADVANCED_FACE ( 'NONE', ( #503 ), #490, .F. ) ; +#401 = CYLINDRICAL_SURFACE ( 'NONE', #761, 0.5000000000000000000 ) ; +#402 = ADVANCED_FACE ( 'NONE', ( #521 ), #486, .F. ) ; +#403 = AXIS2_PLACEMENT_3D ( 'NONE', #1405, #628, #1512 ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 10.00000000000000000 ) ) ; +#405 = AXIS2_PLACEMENT_3D ( 'NONE', #229, #1163, #323 ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -25.93074902771996500, -8.999999999999998200 ) ) ; +#407 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -4.499999999999999100 ) ) ; +#408 = ADVANCED_FACE ( 'NONE', ( #500 ), #467, .T. ) ; +#409 = FACE_OUTER_BOUND ( 'NONE', #1535, .T. ) ; +#410 = ADVANCED_FACE ( 'NONE', ( #517 ), #460, .F. ) ; +#411 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #453, #1402 ) ; +#412 = FACE_OUTER_BOUND ( 'NONE', #1301, .T. ) ; +#413 = CYLINDRICAL_SURFACE ( 'NONE', #778, 2.250000000000000400 ) ; +#414 = FACE_OUTER_BOUND ( 'NONE', #149, .T. ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, -2.499999999999998700, -15.23205080756885900 ) ) ; +#416 = AXIS2_PLACEMENT_3D ( 'NONE', #1522, #762, #54 ) ; +#417 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -2.249999999999999600 ) ) ; +#418 = CYLINDRICAL_SURFACE ( 'NONE', #781, 2.249999999999996900 ) ; +#419 = ADVANCED_FACE ( 'NONE', ( #493 ), #455, .F. ) ; +#420 = FACE_OUTER_BOUND ( 'NONE', #1513, .T. ) ; +#421 = ADVANCED_FACE ( 'NONE', ( #488 ), #1362, .F. ) ; +#422 = CYLINDRICAL_SURFACE ( 'NONE', #783, 3.249999999999997800 ) ; +#423 = AXIS2_PLACEMENT_3D ( 'NONE', #1028, #242, #1184 ) ; +#424 = AXIS2_PLACEMENT_3D ( 'NONE', #1518, #757, #50 ) ; +#425 = ADVANCED_FACE ( 'NONE', ( #463, #444, #468, #452, #459 ), #5, .F. ) ; +#426 = AXIS2_PLACEMENT_3D ( 'NONE', #338, #1308, #477 ) ; +#427 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#428 = ADVANCED_FACE ( 'NONE', ( #443 ), #821, .T. ) ; +#429 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#430 = EDGE_LOOP ( 'NONE', ( #1394, #1396, #1404, #1406 ) ) ; +#431 = FACE_OUTER_BOUND ( 'NONE', #842, .T. ) ; +#432 = FACE_OUTER_BOUND ( 'NONE', #727, .T. ) ; +#433 = AXIS2_PLACEMENT_3D ( 'NONE', #45, #876, #143 ) ; +#434 = ADVANCED_FACE ( 'NONE', ( #441 ), #422, .T. ) ; +#435 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#436 = FACE_OUTER_BOUND ( 'NONE', #1497, .T. ) ; +#437 = ADVANCED_FACE ( 'NONE', ( #432 ), #418, .F. ) ; +#438 = AXIS2_PLACEMENT_3D ( 'NONE', #1304, #471, #1409 ) ; +#439 = FACE_OUTER_BOUND ( 'NONE', #594, .T. ) ; +#440 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#441 = FACE_OUTER_BOUND ( 'NONE', #1188, .T. ) ; +#442 = AXIS2_PLACEMENT_3D ( 'NONE', #123, #40, #870 ) ; +#443 = FACE_OUTER_BOUND ( 'NONE', #1507, .T. ) ; +#444 = FACE_BOUND ( 'NONE', #15, .T. ) ; +#445 = ADVANCED_FACE ( 'NONE', ( #436 ), #413, .T. ) ; +#446 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, -2.499999999999998700, -14.73205080756885900 ) ) ; +#447 = AXIS2_PLACEMENT_3D ( 'NONE', #608, #1499, #733 ) ; +#448 = ADVANCED_FACE ( 'NONE', ( #439 ), #548, .F. ) ; +#449 = AXIS2_PLACEMENT_3D ( 'NONE', #214, #1141, #306 ) ; +#450 = AXIS2_PLACEMENT_3D ( 'NONE', #726, #24, #848 ) ; +#451 = ADVANCED_FACE ( 'NONE', ( #420 ), #401, .F. ) ; +#452 = FACE_BOUND ( 'NONE', #1237, .T. ) ; +#453 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#454 = ADVANCED_FACE ( 'NONE', ( #412 ), #1255, .F. ) ; +#455 = CYLINDRICAL_SURFACE ( 'NONE', #807, 2.500000000000000400 ) ; +#456 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -4.499999999999999100 ) ) ; +#457 = AXIS2_PLACEMENT_3D ( 'NONE', #1281, #435, #1384 ) ; +#458 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#459 = FACE_BOUND ( 'NONE', #1557, .T. ) ; +#460 = CYLINDRICAL_SURFACE ( 'NONE', #810, 1.250000000000001100 ) ; +#461 = AXIS2_PLACEMENT_3D ( 'NONE', #1489, #723, #23 ) ; +#462 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#463 = FACE_BOUND ( 'NONE', #564, .T. ) ; +#464 = AXIS2_PLACEMENT_3D ( 'NONE', #301, #1274, #429 ) ; +#465 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, 2.500000000000000000, 6.000000000000000000 ) ) ; +#466 = ADVANCED_FACE ( 'NONE', ( #414 ), #396, .F. ) ; +#467 = CYLINDRICAL_SURFACE ( 'NONE', #812, 2.250000000000001800 ) ; +#468 = FACE_OUTER_BOUND ( 'NONE', #1094, .T. ) ; +#469 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427522200E-017, -7.500000000000000000, 6.000000000000000000 ) ) ; +#470 = ADVANCED_FACE ( 'NONE', ( #398 ), #393, .F. ) ; +#471 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -16.99999999999999600 ) ) ; +#473 = ADVANCED_FACE ( 'NONE', ( #431 ), #382, .T. ) ; +#474 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#475 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000900, -2.500000000000000000, 2.500000000000000400 ) ) ; +#476 = AXIS2_PLACEMENT_3D ( 'NONE', #17, #836, #113 ) ; +#477 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#478 = ADVANCED_FACE ( 'NONE', ( #409 ), #181, .F. ) ; +#479 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -7.500000000000000000, 6.000000000000000000 ) ) ; +#480 = AXIS2_PLACEMENT_3D ( 'NONE', #1407, #630, #1514 ) ; +#481 = ADVANCED_FACE ( 'NONE', ( #395 ), #377, .F. ) ; +#482 = AXIS2_PLACEMENT_3D ( 'NONE', #865, #132, #1008 ) ; +#483 = ADVANCED_FACE ( 'NONE', ( #379 ), #373, .T. ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -25.93074902771996500, -17.99999999999999600 ) ) ; +#485 = VERTEX_POINT ( 'NONE', #2 ) ; +#486 = CYLINDRICAL_SURFACE ( 'NONE', #815, 1.250000000000001100 ) ; +#487 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 2.500000000000000400 ) ) ; +#488 = FACE_OUTER_BOUND ( 'NONE', #1509, .T. ) ; +#489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#490 = CYLINDRICAL_SURFACE ( 'NONE', #817, 1.250000000000001100 ) ; +#491 = ADVANCED_FACE ( 'NONE', ( #371 ), #818, .F. ) ; +#492 = AXIS2_PLACEMENT_3D ( 'NONE', #456, #1403, #626 ) ; +#493 = FACE_OUTER_BOUND ( 'NONE', #1493, .T. ) ; +#494 = ADVANCED_FACE ( 'NONE', ( #376 ), #361, .T. ) ; +#495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#496 = AXIS2_PLACEMENT_3D ( 'NONE', #1004, #223, #1158 ) ; +#497 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#498 = FACE_OUTER_BOUND ( 'NONE', #1324, .T. ) ; +#499 = ADVANCED_FACE ( 'NONE', ( #378 ), #356, .F. ) ; +#500 = FACE_OUTER_BOUND ( 'NONE', #769, .T. ) ; +#501 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#502 = AXIS2_PLACEMENT_3D ( 'NONE', #1503, #740, #33 ) ; +#503 = FACE_OUTER_BOUND ( 'NONE', #1543, .T. ) ; +#504 = ADVANCED_FACE ( 'NONE', ( #391 ), #218, .F. ) ; +#505 = AXIS2_PLACEMENT_3D ( 'NONE', #1151, #315, #1293 ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -25.93074902771996500, -8.999999999999998200 ) ) ; +#507 = ADVANCED_FACE ( 'NONE', ( #365 ), #350, .T. ) ; +#508 = ADVANCED_FACE ( 'NONE', ( #355 ), #336, .T. ) ; +#509 = AXIS2_PLACEMENT_3D ( 'NONE', #446, #1392, #611 ) ; +#510 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -2.500000000000000000, 10.00000000000000000 ) ) ; +#512 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -25.93074902771996500, -13.49999999999999600 ) ) ; +#513 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -2.250000000000000400 ) ) ; +#514 = AXIS2_PLACEMENT_3D ( 'NONE', #119, #992, #215 ) ; +#515 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#517 = FACE_OUTER_BOUND ( 'NONE', #1385, .T. ) ; +#518 = AXIS2_PLACEMENT_3D ( 'NONE', #1284, #440, #1386 ) ; +#519 = CYLINDRICAL_SURFACE ( 'NONE', #819, 1.249999999999999600 ) ; +#520 = ADVANCED_FACE ( 'NONE', ( #397 ), #226, .F. ) ; +#521 = FACE_OUTER_BOUND ( 'NONE', #430, .T. ) ; +#522 = ADVANCED_FACE ( 'NONE', ( #352 ), #1160, .T. ) ; +#523 = VERTEX_POINT ( 'NONE', #1473 ) ; +#524 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -2.499999999999998700, 0.0000000000000000000 ) ) ; +#525 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, -2.500000000000000000, 0.0000000000000000000 ) ) ; +#526 = ORIENTED_EDGE ( 'NONE', *, *, #837, .F. ) ; +#527 = AXIS2_PLACEMENT_3D ( 'NONE', #115, #988, #212 ) ; +#528 = VERTEX_POINT ( 'NONE', #349 ) ; +#529 = AXIS2_PLACEMENT_3D ( 'NONE', #1383, #600, #1491 ) ; +#530 = ORIENTED_EDGE ( 'NONE', *, *, #841, .T. ) ; +#531 = LINE ( 'NONE', #1181, #1332 ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 10.00000000000000000 ) ) ; +#533 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, 2.500000000000000000, -16.74999999999999300 ) ) ; +#534 = ADVANCED_FACE ( 'NONE', ( #331 ), #326, .T. ) ; +#535 = AXIS2_PLACEMENT_3D ( 'NONE', #206, #1132, #302 ) ; +#536 = ADVANCED_FACE ( 'NONE', ( #334 ), #316, .T. ) ; +#537 = AXIS2_PLACEMENT_3D ( 'NONE', #722, #20, #840 ) ; +#538 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -1.250000000000000200 ) ) ; +#539 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942019700E-016, 7.523163845262643300E-032, 2.500000000000000400 ) ) ; +#540 = AXIS2_PLACEMENT_3D ( 'NONE', #250, #1195, #427 ) ; +#541 = ADVANCED_FACE ( 'NONE', ( #358 ), #310, .T. ) ; +#542 = EDGE_LOOP ( 'NONE', ( #1481, #1483, #1488, #1490 ) ) ; +#543 = AXIS2_PLACEMENT_3D ( 'NONE', #763, #57, #891 ) ; +#544 = ADVANCED_FACE ( 'NONE', ( #341 ), #307, .F. ) ; +#545 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#546 = ORIENTED_EDGE ( 'NONE', *, *, #846, .F. ) ; +#547 = ORIENTED_EDGE ( 'NONE', *, *, #846, .T. ) ; +#548 = PLANE ( 'NONE', #768 ) ; +#549 = VERTEX_POINT ( 'NONE', #9 ) ; +#550 = AXIS2_PLACEMENT_3D ( 'NONE', #1317, #489, #1422 ) ; +#551 = LINE ( 'NONE', #882, #112 ) ; +#552 = ORIENTED_EDGE ( 'NONE', *, *, #851, .T. ) ; +#553 = DATE_TIME_ROLE ( 'classification_date' ) ; +#554 = ADVANCED_FACE ( 'NONE', ( #318 ), #299, .F. ) ; +#555 = AXIS2_PLACEMENT_3D ( 'NONE', #148, #1033, #244 ) ; +#556 = ORIENTED_EDGE ( 'NONE', *, *, #855, .T. ) ; +#557 = ADVANCED_FACE ( 'NONE', ( #313, #329, #309, #305, #298 ), #1116, .F. ) ; +#558 = VERTEX_POINT ( 'NONE', #417 ) ; +#559 = AXIS2_PLACEMENT_3D ( 'NONE', #642, #1519, #760 ) ; +#560 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #1014, #233 ) ; +#561 = ADVANCED_FACE ( 'NONE', ( #292 ), #714, .F. ) ; +#562 = ADVANCED_FACE ( 'NONE', ( #295 ), #290, .F. ) ; +#563 = AXIS2_PLACEMENT_3D ( 'NONE', #1450, #675, #1551 ) ; +#564 = EDGE_LOOP ( 'NONE', ( #764, #765, #767, #773, #776, #787, #825, #829, #827, #568, #789, #792, #795, #797 ) ) ; +#565 = AXIS2_PLACEMENT_3D ( 'NONE', #271, #1223, #374 ) ; +#566 = ORIENTED_EDGE ( 'NONE', *, *, #859, .T. ) ; +#567 = AXIS2_PLACEMENT_3D ( 'NONE', #1546, #790, #77 ) ; +#568 = ORIENTED_EDGE ( 'NONE', *, *, #1031, .F. ) ; +#569 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#570 = ADVANCED_FACE ( 'NONE', ( #297 ), #287, .F. ) ; +#571 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#572 = VERTEX_POINT ( 'NONE', #1172 ) ; +#573 = CIRCLE ( 'NONE', #389, 1.249999999999999600 ) ; +#574 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 10.00000000000000000 ) ) ; +#575 = ADVANCED_FACE ( 'NONE', ( #286 ), #285, .T. ) ; +#576 = ORIENTED_EDGE ( 'NONE', *, *, #862, .T. ) ; +#577 = ORIENTED_EDGE ( 'NONE', *, *, #867, .T. ) ; +#578 = AXIS2_PLACEMENT_3D ( 'NONE', #784, #74, #914 ) ; +#579 = VERTEX_POINT ( 'NONE', #39 ) ; +#580 = AXIS2_PLACEMENT_3D ( 'NONE', #1330, #515, #1440 ) ; +#581 = ADVANCED_FACE ( 'NONE', ( #296 ), #281, .F. ) ; +#582 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #1052, #259 ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999999100, 2.500000000000000000, -6.749999999999997300 ) ) ; +#584 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#585 = ADVANCED_FACE ( 'NONE', ( #294 ), #278, .T. ) ; +#586 = AXIS2_PLACEMENT_3D ( 'NONE', #1443, #670, #777 ) ; +#587 = ORIENTED_EDGE ( 'NONE', *, *, #831, .T. ) ; +#588 = AXIS2_PLACEMENT_3D ( 'NONE', #909, #169, #1060 ) ; +#589 = ADVANCED_FACE ( 'NONE', ( #289 ), #275, .F. ) ; +#590 = VERTEX_POINT ( 'NONE', #43 ) ; +#591 = ADVANCED_FACE ( 'NONE', ( #274 ), #875, .F. ) ; +#592 = ORIENTED_EDGE ( 'NONE', *, *, #849, .F. ) ; +#593 = AXIS2_PLACEMENT_3D ( 'NONE', #164, #1048, #255 ) ; +#594 = EDGE_LOOP ( 'NONE', ( #950, #954, #960, #971 ) ) ; +#595 = AXIS2_PLACEMENT_3D ( 'NONE', #655, #1532, #774 ) ; +#596 = ORIENTED_EDGE ( 'NONE', *, *, #874, .F. ) ; +#597 = ORIENTED_EDGE ( 'NONE', *, *, #877, .T. ) ; +#598 = ADVANCED_FACE ( 'NONE', ( #283 ), #266, .T. ) ; +#599 = EDGE_LOOP ( 'NONE', ( #1003, #1001, #1307, #1311 ) ) ; +#600 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#601 = AXIS2_PLACEMENT_3D ( 'NONE', #251, #1200, #354 ) ; +#602 = ORIENTED_EDGE ( 'NONE', *, *, #881, .T. ) ; +#603 = AXIS2_PLACEMENT_3D ( 'NONE', #766, #59, #896 ) ; +#604 = LINE ( 'NONE', #1314, #384 ) ; +#605 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #495, #1424 ) ; +#606 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, 2.500000000000000000, 6.000000000000000000 ) ) ; +#607 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, 2.500000000000000000, -13.49999999999999600 ) ) ; +#609 = AXIS2_PLACEMENT_3D ( 'NONE', #782, #69, #908 ) ; +#610 = ORIENTED_EDGE ( 'NONE', *, *, #884, .T. ) ; +#611 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#612 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#613 = ORIENTED_EDGE ( 'NONE', *, *, #890, .F. ) ; +#614 = AXIS2_PLACEMENT_3D ( 'NONE', #1325, #510, #1437 ) ; +#615 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#616 = ORIENTED_EDGE ( 'NONE', *, *, #894, .F. ) ; +#617 = AXIS2_PLACEMENT_3D ( 'NONE', #163, #1047, #253 ) ; +#618 = ORIENTED_EDGE ( 'NONE', *, *, #898, .F. ) ; +#619 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -25.93074902771996500, -17.99999999999999600 ) ) ; +#620 = ORIENTED_EDGE ( 'NONE', *, *, #900, .F. ) ; +#621 = AXIS2_PLACEMENT_3D ( 'NONE', #653, #1530, #772 ) ; +#622 = CARTESIAN_POINT ( 'NONE', ( 1.249000902703301100E-014, -2.499999999999998700, -17.99999999999999600 ) ) ; +#623 = ORIENTED_EDGE ( 'NONE', *, *, #906, .T. ) ; +#624 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, -2.499999999999998700, 0.0000000000000000000 ) ) ; +#625 = EDGE_LOOP ( 'NONE', ( #1452, #1453, #1454, #1465 ) ) ; +#626 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#627 = AXIS2_PLACEMENT_3D ( 'NONE', #1198, #353, #1321 ) ; +#628 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#629 = AXIS2_PLACEMENT_3D ( 'NONE', #58, #895, #156 ) ; +#630 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#631 = AXIS2_PLACEMENT_3D ( 'NONE', #1191, #347, #1318 ) ; +#632 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#633 = VERTEX_POINT ( 'NONE', #100 ) ; +#634 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#635 = ORIENTED_EDGE ( 'NONE', *, *, #911, .T. ) ; +#636 = AXIS2_PLACEMENT_3D ( 'NONE', #1516, #142, #1305 ) ; +#637 = ORIENTED_EDGE ( 'NONE', *, *, #916, .F. ) ; +#638 = ORIENTED_EDGE ( 'NONE', *, *, #922, .T. ) ; +#639 = AXIS2_PLACEMENT_3D ( 'NONE', #337, #1388, #607 ) ; +#640 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#641 = ORIENTED_EDGE ( 'NONE', *, *, #925, .T. ) ; +#642 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -8.597800040494614000E-016 ) ) ; +#643 = AXIS2_PLACEMENT_3D ( 'NONE', #1019, #234, #1178 ) ; +#644 = ORIENTED_EDGE ( 'NONE', *, *, #828, .T. ) ; +#645 = EDGE_LOOP ( 'NONE', ( #1166, #1169, #1173, #1190 ) ) ; +#646 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#647 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#648 = AXIS2_PLACEMENT_3D ( 'NONE', #469, #632, #1168 ) ; +#649 = AXIS2_PLACEMENT_3D ( 'NONE', #328, #231, #1303 ) ; +#650 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#651 = AXIS2_PLACEMENT_3D ( 'NONE', #11, #869, #134 ) ; +#652 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #332, #474 ) ; +#653 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -4.499999999999999100 ) ) ; +#654 = ORIENTED_EDGE ( 'NONE', *, *, #927, .T. ) ; +#655 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -4.499999999999999100 ) ) ; +#656 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -8.597800040494614000E-016 ) ) ; +#657 = ORIENTED_EDGE ( 'NONE', *, *, #1002, .T. ) ; +#658 = ORIENTED_EDGE ( 'NONE', *, *, #1054, .T. ) ; +#659 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -25.93074902771996500, 0.0000000000000000000 ) ) ; +#660 = AXIS2_PLACEMENT_3D ( 'NONE', #321, #872, #1013 ) ; +#661 = ORIENTED_EDGE ( 'NONE', *, *, #1009, .T. ) ; +#662 = AXIS2_PLACEMENT_3D ( 'NONE', #1433, #1322, #1123 ) ; +#663 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#664 = ORIENTED_EDGE ( 'NONE', *, *, #837, .T. ) ; +#665 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.499999999999998700, -16.99999999999999600 ) ) ; +#666 = ORIENTED_EDGE ( 'NONE', *, *, #999, .T. ) ; +#667 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #1155, #320 ) ; +#668 = VERTEX_POINT ( 'NONE', #967 ) ; +#669 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -2.500000000000000400, 6.000000000000000000 ) ) ; +#670 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999984000, -25.93074902771996500, -18.00000000000000000 ) ) ; +#672 = AXIS2_PLACEMENT_3D ( 'NONE', #833, #107, #973 ) ; +#673 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -10.24999999999999800 ) ) ; +#674 = AXIS2_PLACEMENT_3D ( 'NONE', #1264, #1370, #584 ) ; +#675 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#676 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -2.499999999999998700, -16.74999999999999300 ) ) ; +#677 = ORIENTED_EDGE ( 'NONE', *, *, #1238, .F. ) ; +#678 = AXIS2_PLACEMENT_3D ( 'NONE', #709, #102, #968 ) ; +#679 = ORIENTED_EDGE ( 'NONE', *, *, #1131, .F. ) ; +#680 = EDGE_LOOP ( 'NONE', ( #658, #661, #664, #666, #677, #679, #681, #682, #685, #687, #696, #697, #698, #702 ) ) ; +#681 = ORIENTED_EDGE ( 'NONE', *, *, #1260, .T. ) ; +#682 = ORIENTED_EDGE ( 'NONE', *, *, #1130, .T. ) ; +#683 = AXIS2_PLACEMENT_3D ( 'NONE', #506, #357, #1043 ) ; +#684 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -4.499999999999999100 ) ) ; +#685 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .T. ) ; +#686 = AXIS2_PLACEMENT_3D ( 'NONE', #252, #161, #770 ) ; +#687 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .F. ) ; +#688 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #1460 ) ; +#689 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#690 = VECTOR ( 'NONE', #1309, 1000.000000000000000 ) ; +#691 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#692 = AXIS2_PLACEMENT_3D ( 'NONE', #61, #1528, #249 ) ; +#693 = APPROVAL_ROLE ( '' ) ; +#694 = AXIS2_PLACEMENT_3D ( 'NONE', #1194, #501, #1426 ) ; +#695 = VERTEX_POINT ( 'NONE', #708 ) ; +#696 = ORIENTED_EDGE ( 'NONE', *, *, #930, .T. ) ; +#697 = ORIENTED_EDGE ( 'NONE', *, *, #934, .F. ) ; +#698 = ORIENTED_EDGE ( 'NONE', *, *, #936, .F. ) ; +#699 = LINE ( 'NONE', #60, #1569 ) ; +#700 = EDGE_LOOP ( 'NONE', ( #1315, #1316, #1323, #1328 ) ) ; +#701 = AXIS2_PLACEMENT_3D ( 'NONE', #823, #276, #1037 ) ; +#702 = ORIENTED_EDGE ( 'NONE', *, *, #940, .T. ) ; +#703 = ORIENTED_EDGE ( 'NONE', *, *, #946, .T. ) ; +#704 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#705 = AXIS2_PLACEMENT_3D ( 'NONE', #860, #1300, #458 ) ; +#706 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427522200E-017, -7.500000000000000000, 6.000000000000000000 ) ) ; +#707 = LINE ( 'NONE', #55, #956 ) ; +#708 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#709 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -2.168404344971008900E-016 ) ) ; +#710 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #35, #997 ) ; +#711 = ORIENTED_EDGE ( 'NONE', *, *, #947, .T. ) ; +#712 = AXIS2_PLACEMENT_3D ( 'NONE', #619, #1398, #1505 ) ; +#713 = ORIENTED_EDGE ( 'NONE', *, *, #854, .T. ) ; +#714 = PLANE ( 'NONE', #672 ) ; +#715 = ORIENTED_EDGE ( 'NONE', *, *, #948, .F. ) ; +#716 = VERTEX_POINT ( 'NONE', #200 ) ; +#717 = EDGE_LOOP ( 'NONE', ( #921, #931, #932, #933 ) ) ; +#718 = ORIENTED_EDGE ( 'NONE', *, *, #951, .F. ) ; +#719 = AXIS2_PLACEMENT_3D ( 'NONE', #1154, #317, #1294 ) ; +#720 = VERTEX_POINT ( 'NONE', #293 ) ; +#721 = AXIS2_PLACEMENT_3D ( 'NONE', #706, #571, #1343 ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, -2.499999999999998700, -0.5000000000000000000 ) ) ; +#723 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#724 = AXIS2_PLACEMENT_3D ( 'NONE', #406, #1253, #98 ) ; +#725 = ORIENTED_EDGE ( 'NONE', *, *, #955, .T. ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -4.499999999999999100 ) ) ; +#727 = EDGE_LOOP ( 'NONE', ( #1279, #1280, #1290, #1292 ) ) ; +#728 = AXIS2_PLACEMENT_3D ( 'NONE', #953, #191, #1106 ) ; +#729 = ORIENTED_EDGE ( 'NONE', *, *, #959, .T. ) ; +#730 = AXIS2_PLACEMENT_3D ( 'NONE', #539, #381, #1456 ) ; +#731 = VERTEX_POINT ( 'NONE', #826 ) ; +#732 = DIRECTION ( 'NONE', ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ; +#733 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#734 = ORIENTED_EDGE ( 'NONE', *, *, #962, .F. ) ; +#735 = ORIENTED_EDGE ( 'NONE', *, *, #969, .F. ) ; +#736 = AXIS2_PLACEMENT_3D ( 'NONE', #684, #1458, #1081 ) ; +#737 = ORIENTED_EDGE ( 'NONE', *, *, #970, .F. ) ; +#738 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#739 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, -7.500000000000000000, 6.000000000000000000 ) ) ; +#740 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#741 = AXIS2_PLACEMENT_3D ( 'NONE', #1232, #383, #1345 ) ; +#742 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#743 = AXIS2_PLACEMENT_3D ( 'NONE', #1365, #1536, #1327 ) ; +#744 = ORIENTED_EDGE ( 'NONE', *, *, #972, .T. ) ; +#745 = EDGE_LOOP ( 'NONE', ( #1425, #1428, #1431, #1435 ) ) ; +#746 = ORIENTED_EDGE ( 'NONE', *, *, #916, .T. ) ; +#747 = AXIS2_PLACEMENT_3D ( 'NONE', #512, #363, #1438 ) ; +#748 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#749 = ORIENTED_EDGE ( 'NONE', *, *, #835, .T. ) ; +#750 = AXIS2_PLACEMENT_3D ( 'NONE', #407, #1049, #256 ) ; +#751 = VERTEX_POINT ( 'NONE', #1263 ) ; +#752 = ORIENTED_EDGE ( 'NONE', *, *, #871, .F. ) ; +#753 = ORIENTED_EDGE ( 'NONE', *, *, #978, .T. ) ; +#754 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#755 = VERTEX_POINT ( 'NONE', #8 ) ; +#756 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#757 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#758 = CARTESIAN_POINT ( 'NONE', ( -6.181694990624912100, 2.500000000000000000, -0.8333333333333334800 ) ) ; +#759 = AXIS2_PLACEMENT_3D ( 'NONE', #574, #1476, #689 ) ; +#760 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#761 = AXIS2_PLACEMENT_3D ( 'NONE', #193, #957, #1108 ) ; +#762 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#763 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -2.168404344971008900E-016 ) ) ; +#764 = ORIENTED_EDGE ( 'NONE', *, *, #980, .F. ) ; +#765 = ORIENTED_EDGE ( 'NONE', *, *, #983, .T. ) ; +#766 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -13.49999999999999600 ) ) ; +#767 = ORIENTED_EDGE ( 'NONE', *, *, #834, .T. ) ; +#768 = AXIS2_PLACEMENT_3D ( 'NONE', #282, #1563, #99 ) ; +#769 = EDGE_LOOP ( 'NONE', ( #1242, #1244, #1246, #1250 ) ) ; +#770 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#771 = VERTEX_POINT ( 'NONE', #1368 ) ; +#772 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#773 = ORIENTED_EDGE ( 'NONE', *, *, #989, .T. ) ; +#774 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#775 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#776 = ORIENTED_EDGE ( 'NONE', *, *, #990, .T. ) ; +#777 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#778 = AXIS2_PLACEMENT_3D ( 'NONE', #1236, #1089, #388 ) ; +#779 = CARTESIAN_POINT ( 'NONE', ( -6.181694990624913000, -25.93074902771996500, -0.8333333333333332600 ) ) ; +#780 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#781 = AXIS2_PLACEMENT_3D ( 'NONE', #1313, #1211, #1434 ) ; +#782 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -2.499999999999998700, -17.99999999999999600 ) ) ; +#783 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #905, #1056 ) ; +#784 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -4.499999999999999100 ) ) ; +#785 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -25.93074902771996500, -10.24999999999999800 ) ) ; +#786 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -11.25000000000000000 ) ) ; +#787 = ORIENTED_EDGE ( 'NONE', *, *, #993, .T. ) ; +#788 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -2.499999999999998700, -8.999999999999998200 ) ) ; +#789 = ORIENTED_EDGE ( 'NONE', *, *, #1035, .T. ) ; +#790 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#791 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, 2.500000000000000000, -11.25000000000000000 ) ) ; +#792 = ORIENTED_EDGE ( 'NONE', *, *, #1038, .T. ) ; +#793 = VERTEX_POINT ( 'NONE', #583 ) ; +#794 = AXIS2_PLACEMENT_3D ( 'NONE', #659, #1534, #780 ) ; +#795 = ORIENTED_EDGE ( 'NONE', *, *, #1040, .T. ) ; +#796 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#797 = ORIENTED_EDGE ( 'NONE', *, *, #1044, .F. ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, 2.500000000000000000, -16.23861278752582000 ) ) ; +#799 = VERTEX_POINT ( 'NONE', #415 ) ; +#800 = AXIS2_PLACEMENT_3D ( 'NONE', #404, #196, #1487 ) ; +#801 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#802 = AXIS2_PLACEMENT_3D ( 'NONE', #569, #1472, #704 ) ; +#803 = APPROVAL_ROLE ( '' ) ; +#804 = VERTEX_POINT ( 'NONE', #1114 ) ; +#805 = EDGE_LOOP ( 'NONE', ( #638, #641, #644, #654, #657 ) ) ; +#806 = ORIENTED_EDGE ( 'NONE', *, *, #1059, .F. ) ; +#807 = AXIS2_PLACEMENT_3D ( 'NONE', #1375, #1268, #974 ) ; +#808 = ORIENTED_EDGE ( 'NONE', *, *, #854, .F. ) ; +#809 = ORIENTED_EDGE ( 'NONE', *, *, #1063, .F. ) ; +#810 = AXIS2_PLACEMENT_3D ( 'NONE', #203, #109, #1124 ) ; +#811 = ORIENTED_EDGE ( 'NONE', *, *, #1067, .F. ) ; +#812 = AXIS2_PLACEMENT_3D ( 'NONE', #484, #344, #145 ) ; +#813 = ORIENTED_EDGE ( 'NONE', *, *, #1073, .F. ) ; +#814 = ORIENTED_EDGE ( 'NONE', *, *, #855, .F. ) ; +#815 = AXIS2_PLACEMENT_3D ( 'NONE', #1026, #878, #241 ) ; +#816 = DESIGN_CONTEXT ( 'detailed design', #1460, 'design' ) ; +#817 = AXIS2_PLACEMENT_3D ( 'NONE', #1542, #25, #756 ) ; +#818 = PLANE ( 'NONE', #728 ) ; +#819 = AXIS2_PLACEMENT_3D ( 'NONE', #918, #269, #1219 ) ; +#820 = VERTEX_POINT ( 'NONE', #1482 ) ; +#821 = PLANE ( 'NONE', #794 ) ; +#822 = ORIENTED_EDGE ( 'NONE', *, *, #1076, .T. ) ; +#823 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.93074902771996500, -16.99999999999999600 ) ) ; +#824 = ORIENTED_EDGE ( 'NONE', *, *, #1079, .T. ) ; +#825 = ORIENTED_EDGE ( 'NONE', *, *, #1005, .F. ) ; +#826 = CARTESIAN_POINT ( 'NONE', ( -2.180415093947897000, -2.499999999999998700, -14.56777736655967600 ) ) ; +#827 = ORIENTED_EDGE ( 'NONE', *, *, #1018, .T. ) ; +#828 = EDGE_CURVE ( 'NONE', #771, #342, #277, .T. ) ; +#829 = ORIENTED_EDGE ( 'NONE', *, *, #1010, .F. ) ; +#830 = ORIENTED_EDGE ( 'NONE', *, *, #828, .F. ) ; +#831 = EDGE_CURVE ( 'NONE', #771, #804, #280, .T. ) ; +#832 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, -2.499999999999998700, 0.0000000000000000000 ) ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.93074902771996500, -16.99999999999999600 ) ) ; +#834 = EDGE_CURVE ( 'NONE', #1504, #1074, #291, .T. ) ; +#835 = EDGE_CURVE ( 'NONE', #1504, #1329, #268, .T. ) ; +#836 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#837 = EDGE_CURVE ( 'NONE', #1545, #1329, #262, .T. ) ; +#838 = VERTEX_POINT ( 'NONE', #1291 ) ; +#839 = VERTEX_POINT ( 'NONE', #1395 ) ; +#840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#841 = EDGE_CURVE ( 'NONE', #1545, #1074, #240, .T. ) ; +#842 = EDGE_LOOP ( 'NONE', ( #975, #976, #979, #981 ) ) ; +#843 = ORIENTED_EDGE ( 'NONE', *, *, #834, .F. ) ; +#844 = ORIENTED_EDGE ( 'NONE', *, *, #970, .T. ) ; +#845 = ORIENTED_EDGE ( 'NONE', *, *, #1087, .T. ) ; +#846 = EDGE_CURVE ( 'NONE', #579, #1134, #245, .T. ) ; +#847 = ORIENTED_EDGE ( 'NONE', *, *, #1091, .T. ) ; +#848 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#849 = EDGE_CURVE ( 'NONE', #342, #1297, #236, .T. ) ; +#850 = ORIENTED_EDGE ( 'NONE', *, *, #1095, .F. ) ; +#851 = EDGE_CURVE ( 'NONE', #579, #1213, #258, .T. ) ; +#852 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#853 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 6.938893903907230300E-016 ) ) ; +#854 = EDGE_CURVE ( 'NONE', #804, #1297, #228, .T. ) ; +#855 = EDGE_CURVE ( 'NONE', #1213, #695, #224, .T. ) ; +#856 = ORIENTED_EDGE ( 'NONE', *, *, #1097, .F. ) ; +#857 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#858 = ORIENTED_EDGE ( 'NONE', *, *, #1100, .F. ) ; +#859 = EDGE_CURVE ( 'NONE', #695, #1134, #248, .T. ) ; +#860 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -7.500000000000000000, 6.000000000000000000 ) ) ; +#861 = ORIENTED_EDGE ( 'NONE', *, *, #1105, .F. ) ; +#862 = EDGE_CURVE ( 'NONE', #820, #1541, #217, .T. ) ; +#863 = VERTEX_POINT ( 'NONE', #1506 ) ; +#864 = ORIENTED_EDGE ( 'NONE', *, *, #1109, .T. ) ; +#865 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -2.168404344971008900E-016 ) ) ; +#866 = ORIENTED_EDGE ( 'NONE', *, *, #1110, .T. ) ; +#867 = EDGE_CURVE ( 'NONE', #1541, #579, #211, .T. ) ; +#868 = ORIENTED_EDGE ( 'NONE', *, *, #1115, .T. ) ; +#869 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#870 = DIRECTION ( 'NONE', ( 7.709882115452470300E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#871 = EDGE_CURVE ( 'NONE', #549, #1134, #210, .T. ) ; +#872 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#873 = CARTESIAN_POINT ( 'NONE', ( -5.999999999999991100, 2.500000000000000000, -16.99999999999999600 ) ) ; +#874 = EDGE_CURVE ( 'NONE', #913, #549, #222, .T. ) ; +#875 = PLANE ( 'NONE', #643 ) ; +#876 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#877 = EDGE_CURVE ( 'NONE', #913, #300, #208, .T. ) ; +#878 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#879 = ORIENTED_EDGE ( 'NONE', *, *, #1119, .F. ) ; +#880 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999995600, -25.93074902771996500, -11.24999999999999800 ) ) ; +#881 = EDGE_CURVE ( 'NONE', #300, #1252, #207, .T. ) ; +#882 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -7.500000000000000000, 5.000000000000000000 ) ) ; +#883 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .F. ) ; +#884 = EDGE_CURVE ( 'NONE', #1252, #720, #205, .T. ) ; +#885 = EDGE_LOOP ( 'NONE', ( #1102, #1111, #1113, #1117 ) ) ; +#886 = VERTEX_POINT ( 'NONE', #1400 ) ; +#887 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, -2.499999999999998700, -15.23205080756885900 ) ) ; +#888 = ORIENTED_EDGE ( 'NONE', *, *, #1156, .F. ) ; +#889 = ORIENTED_EDGE ( 'NONE', *, *, #1157, .F. ) ; +#890 = EDGE_CURVE ( 'NONE', #838, #720, #201, .T. ) ; +#891 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#892 = ORIENTED_EDGE ( 'NONE', *, *, #1161, .T. ) ; +#893 = APPROVAL_DATE_TIME ( #899, #314 ) ; +#894 = EDGE_CURVE ( 'NONE', #1427, #838, #199, .T. ) ; +#895 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#896 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#897 = VECTOR ( 'NONE', #1537, 1000.000000000000000 ) ; +#898 = EDGE_CURVE ( 'NONE', #977, #1427, #197, .T. ) ; +#899 = DATE_AND_TIME ( #924, #926 ) ; +#900 = EDGE_CURVE ( 'NONE', #1525, #977, #204, .T. ) ; +#901 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -25.93074902771996500, -6.749999999999997300 ) ) ; +#903 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#904 = VERTEX_POINT ( 'NONE', #360 ) ; +#905 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#906 = EDGE_CURVE ( 'NONE', #1525, #88, #195, .T. ) ; +#907 = ORIENTED_EDGE ( 'NONE', *, *, #831, .F. ) ; +#908 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427522200E-017, -2.500000000000000400, 6.000000000000000000 ) ) ; +#910 = ORIENTED_EDGE ( 'NONE', *, *, #925, .F. ) ; +#911 = EDGE_CURVE ( 'NONE', #88, #1282, #192, .T. ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -2.499999999999998700, -15.74999999999999300 ) ) ; +#913 = VERTEX_POINT ( 'NONE', #1429 ) ; +#914 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#915 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -25.93074902771996500, -7.749999999999996400 ) ) ; +#916 = EDGE_CURVE ( 'NONE', #820, #1282, #188, .T. ) ; +#917 = ORIENTED_EDGE ( 'NONE', *, *, #1189, .T. ) ; +#918 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -25.93074902771996500, -8.597800040494614000E-016 ) ) ; +#919 = ORIENTED_EDGE ( 'NONE', *, *, #1063, .T. ) ; +#920 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#921 = ORIENTED_EDGE ( 'NONE', *, *, #1197, .T. ) ; +#922 = EDGE_CURVE ( 'NONE', #958, #755, #194, .T. ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -2.499999999999998700, -16.99999999999999600 ) ) ; +#924 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#925 = EDGE_CURVE ( 'NONE', #755, #771, #189, .T. ) ; +#926 = LOCAL_TIME ( 15, 8, 11.00000000000000000, #943 ) ; +#927 = EDGE_CURVE ( 'NONE', #342, #528, #185, .T. ) ; +#928 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.499999999999998700, -16.99999999999999600 ) ) ; +#929 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -2.499999999999998700, -6.749999999999997300 ) ) ; +#930 = EDGE_CURVE ( 'NONE', #799, #731, #183, .T. ) ; +#931 = ORIENTED_EDGE ( 'NONE', *, *, #1067, .T. ) ; +#932 = ORIENTED_EDGE ( 'NONE', *, *, #1189, .F. ) ; +#933 = ORIENTED_EDGE ( 'NONE', *, *, #922, .F. ) ; +#934 = EDGE_CURVE ( 'NONE', #1468, #731, #186, .T. ) ; +#935 = ORIENTED_EDGE ( 'NONE', *, *, #1204, .T. ) ; +#936 = EDGE_CURVE ( 'NONE', #1312, #1468, #177, .T. ) ; +#937 = ORIENTED_EDGE ( 'NONE', *, *, #1073, .T. ) ; +#938 = ORIENTED_EDGE ( 'NONE', *, *, #1197, .F. ) ; +#939 = DATE_TIME_ROLE ( 'creation_date' ) ; +#940 = EDGE_CURVE ( 'NONE', #1312, #1495, #175, .T. ) ; +#941 = LINE ( 'NONE', #1430, #945 ) ; +#942 = ORIENTED_EDGE ( 'NONE', *, *, #1002, .F. ) ; +#943 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#944 = PRODUCT ( 'Trigger_Spring', 'Trigger_Spring', '', ( #1349 ) ) ; +#945 = VECTOR ( 'NONE', #1202, 1000.000000000000000 ) ; +#946 = EDGE_CURVE ( 'NONE', #590, #1269, #174, .T. ) ; +#947 = EDGE_CURVE ( 'NONE', #1269, #1138, #178, .T. ) ; +#948 = EDGE_CURVE ( 'NONE', #1523, #1138, #162, .T. ) ; +#949 = VERTEX_POINT ( 'NONE', #1444 ) ; +#950 = ORIENTED_EDGE ( 'NONE', *, *, #849, .T. ) ; +#951 = EDGE_CURVE ( 'NONE', #590, #1523, #159, .T. ) ; +#952 = EDGE_LOOP ( 'NONE', ( #1093, #1098, #1099, #1101 ) ) ; +#953 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -25.93074902771996500, 0.0000000000000000000 ) ) ; +#954 = ORIENTED_EDGE ( 'NONE', *, *, #1059, .T. ) ; +#955 = EDGE_CURVE ( 'NONE', #1346, #1042, #155, .T. ) ; +#956 = VECTOR ( 'NONE', #1036, 1000.000000000000000 ) ; +#957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#958 = VERTEX_POINT ( 'NONE', #1070 ) ; +#959 = EDGE_CURVE ( 'NONE', #1042, #863, #154, .T. ) ; +#960 = ORIENTED_EDGE ( 'NONE', *, *, #1204, .F. ) ; +#961 = EDGE_LOOP ( 'NONE', ( #1372, #996, #998, #1374 ) ) ; +#962 = EDGE_CURVE ( 'NONE', #1373, #863, #153, .T. ) ; +#963 = VECTOR ( 'NONE', #647, 1000.000000000000000 ) ; +#964 = LINE ( 'NONE', #1310, #690 ) ; +#965 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1554, 'distance_accuracy_value', 'NONE'); +#966 = APPROVAL_PERSON_ORGANIZATION ( #984, #314, #693 ) ; +#967 = CARTESIAN_POINT ( 'NONE', ( 6.181694990624913000, 2.500000000000000000, -0.8333333333333328200 ) ) ; +#968 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#969 = EDGE_CURVE ( 'NONE', #1346, #1373, #172, .T. ) ; +#970 = EDGE_CURVE ( 'NONE', #633, #1474, #150, .T. ) ; +#971 = ORIENTED_EDGE ( 'NONE', *, *, #927, .F. ) ; +#972 = EDGE_CURVE ( 'NONE', #633, #820, #140, .T. ) ; +#973 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#974 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#975 = ORIENTED_EDGE ( 'NONE', *, *, #1207, .F. ) ; +#976 = ORIENTED_EDGE ( 'NONE', *, *, #951, .T. ) ; +#977 = VERTEX_POINT ( 'NONE', #1023 ) ; +#978 = EDGE_CURVE ( 'NONE', #1282, #1474, #121, .T. ) ; +#979 = ORIENTED_EDGE ( 'NONE', *, *, #1212, .T. ) ; +#980 = EDGE_CURVE ( 'NONE', #668, #886, #125, .T. ) ; +#981 = ORIENTED_EDGE ( 'NONE', *, *, #1139, .T. ) ; +#982 = EDGE_LOOP ( 'NONE', ( #1466, #1467, #1469, #1475 ) ) ; +#983 = EDGE_CURVE ( 'NONE', #668, #1504, #131, .T. ) ; +#984 = PERSON_AND_ORGANIZATION ( #691, #1228 ) ; +#985 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#986 = DATE_AND_TIME ( #987, #1006 ) ; +#987 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#988 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#989 = EDGE_CURVE ( 'NONE', #1074, #1192, #118, .T. ) ; +#990 = EDGE_CURVE ( 'NONE', #1192, #485, #117, .T. ) ; +#991 = ORIENTED_EDGE ( 'NONE', *, *, #1212, .F. ) ; +#992 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#993 = EDGE_CURVE ( 'NONE', #485, #1558, #135, .T. ) ; +#994 = ORIENTED_EDGE ( 'NONE', *, *, #948, .T. ) ; +#995 = VERTEX_POINT ( 'NONE', #1187 ) ; +#996 = ORIENTED_EDGE ( 'NONE', *, *, #969, .T. ) ; +#997 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#998 = ORIENTED_EDGE ( 'NONE', *, *, #1171, .T. ) ; +#999 = EDGE_CURVE ( 'NONE', #1329, #1112, #114, .T. ) ; +#1000 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1001 = ORIENTED_EDGE ( 'NONE', *, *, #874, .T. ) ; +#1002 = EDGE_CURVE ( 'NONE', #528, #958, #111, .T. ) ; +#1003 = ORIENTED_EDGE ( 'NONE', *, *, #1266, .F. ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, 2.500000000000000000, -8.999999999999998200 ) ) ; +#1005 = EDGE_CURVE ( 'NONE', #1377, #1558, #116, .T. ) ; +#1006 = LOCAL_TIME ( 15, 8, 11.00000000000000000, #1007 ) ; +#1007 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1008 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1009 = EDGE_CURVE ( 'NONE', #1046, #1545, #108, .T. ) ; +#1010 = EDGE_CURVE ( 'NONE', #839, #1377, #105, .T. ) ; +#1011 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .F. ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, 2.500000000000000000, -0.0000000000000000000 ) ) ; +#1013 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1014 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1015 = ORIENTED_EDGE ( 'NONE', *, *, #1142, .F. ) ; +#1016 = EDGE_CURVE ( 'NONE', #799, #1096, #110, .T. ) ; +#1017 = ORIENTED_EDGE ( 'NONE', *, *, #1139, .F. ) ; +#1018 = EDGE_CURVE ( 'NONE', #839, #1461, #103, .T. ) ; +#1019 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 10.00000000000000000 ) ) ; +#1020 = ORIENTED_EDGE ( 'NONE', *, *, #1133, .T. ) ; +#1021 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1022 = ORIENTED_EDGE ( 'NONE', *, *, #1145, .T. ) ; +#1023 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -11.24999999999999800 ) ) ; +#1024 = VERTEX_POINT ( 'NONE', #606 ) ; +#1025 = EDGE_CURVE ( 'NONE', #1526, #1096, #104, .T. ) ; +#1026 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999984900, -25.93074902771996500, -17.99999999999999600 ) ) ; +#1027 = ORIENTED_EDGE ( 'NONE', *, *, #1214, .T. ) ; +#1028 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -2.168404344971008900E-016 ) ) ; +#1029 = VECTOR ( 'NONE', #1041, 1000.000000000000000 ) ; +#1030 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1031 = EDGE_CURVE ( 'NONE', #1410, #1461, #96, .T. ) ; +#1032 = PERSON_AND_ORGANIZATION ( #691, #1228 ) ; +#1033 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1034 = PERSON_AND_ORGANIZATION ( #691, #1228 ) ; +#1035 = EDGE_CURVE ( 'NONE', #1410, #1243, #95, .T. ) ; +#1036 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1037 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1038 = EDGE_CURVE ( 'NONE', #1243, #716, #93, .T. ) ; +#1039 = ORIENTED_EDGE ( 'NONE', *, *, #1153, .T. ) ; +#1040 = EDGE_CURVE ( 'NONE', #716, #1521, #97, .T. ) ; +#1041 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1042 = VERTEX_POINT ( 'NONE', #126 ) ; +#1043 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1044 = EDGE_CURVE ( 'NONE', #886, #1521, #92, .T. ) ; +#1045 = ORIENTED_EDGE ( 'NONE', *, *, #1142, .T. ) ; +#1046 = VERTEX_POINT ( 'NONE', #26 ) ; +#1047 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1048 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1049 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1050 = CARTESIAN_POINT ( 'NONE', ( 6.181694990624913000, -25.93074902771996500, -0.8333333333333329300 ) ) ; +#1051 = ORIENTED_EDGE ( 'NONE', *, *, #947, .F. ) ; +#1052 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1053 = ORIENTED_EDGE ( 'NONE', *, *, #1217, .T. ) ; +#1054 = EDGE_CURVE ( 'NONE', #1495, #1046, #91, .T. ) ; +#1055 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, 2.500000000000000000, 6.000000000000000000 ) ) ; +#1056 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1057 = ORIENTED_EDGE ( 'NONE', *, *, #1145, .F. ) ; +#1058 = PERSON_AND_ORGANIZATION ( #691, #1228 ) ; +#1059 = EDGE_CURVE ( 'NONE', #1297, #1559, #85, .T. ) ; +#1060 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1061 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999985800, -25.93074902771996500, -18.00000000000000400 ) ) ; +#1062 = APPROVAL_DATE_TIME ( #1065, #343 ) ; +#1063 = EDGE_CURVE ( 'NONE', #1024, #804, #84, .T. ) ; +#1064 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1065 = DATE_AND_TIME ( #1084, #1086 ) ; +#1066 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, 2.500000000000000000, -16.99999999999999600 ) ) ; +#1067 = EDGE_CURVE ( 'NONE', #949, #1024, #86, .T. ) ; +#1068 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, -2.499999999999998700, -2.250000000000000400 ) ) ; +#1069 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999999100, -25.93074902771996500, -6.749999999999997300 ) ) ; +#1070 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, -2.500000000000000400, 5.000000000000000000 ) ) ; +#1071 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, 2.500000000000000000, -15.23205080756885900 ) ) ; +#1072 = ORIENTED_EDGE ( 'NONE', *, *, #1214, .F. ) ; +#1073 = EDGE_CURVE ( 'NONE', #1559, #949, #81, .T. ) ; +#1074 = VERTEX_POINT ( 'NONE', #325 ) ; +#1075 = ORIENTED_EDGE ( 'NONE', *, *, #946, .F. ) ; +#1076 = EDGE_CURVE ( 'NONE', #1213, #1277, #79, .T. ) ; +#1077 = ORIENTED_EDGE ( 'NONE', *, *, #1207, .T. ) ; +#1078 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884035500E-016, -2.500000000000000000, 10.00000000000000000 ) ) ; +#1079 = EDGE_CURVE ( 'NONE', #1277, #633, #68, .T. ) ; +#1080 = ORIENTED_EDGE ( 'NONE', *, *, #1133, .F. ) ; +#1081 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1082 = ORIENTED_EDGE ( 'NONE', *, *, #1217, .F. ) ; +#1083 = VERTEX_POINT ( 'NONE', #873 ) ; +#1084 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1085 = EDGE_CURVE ( 'NONE', #731, #839, #63, .T. ) ; +#1086 = LOCAL_TIME ( 15, 8, 11.00000000000000000, #1088 ) ; +#1087 = EDGE_CURVE ( 'NONE', #1474, #523, #70, .T. ) ; +#1088 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1089 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1090 = APPROVAL_PERSON_ORGANIZATION ( #1103, #343, #1092 ) ; +#1091 = EDGE_CURVE ( 'NONE', #523, #751, #53, .T. ) ; +#1092 = APPROVAL_ROLE ( '' ) ; +#1093 = ORIENTED_EDGE ( 'NONE', *, *, #1016, .T. ) ; +#1094 = EDGE_LOOP ( 'NONE', ( #814, #822, #824, #844, #845, #847, #850, #856, #858, #861, #864, #866, #868, #879, #883 ) ) ; +#1095 = EDGE_CURVE ( 'NONE', #1520, #751, #64, .T. ) ; +#1096 = VERTEX_POINT ( 'NONE', #209 ) ; +#1097 = EDGE_CURVE ( 'NONE', #1464, #1520, #66, .T. ) ; +#1098 = ORIENTED_EDGE ( 'NONE', *, *, #1225, .T. ) ; +#1099 = ORIENTED_EDGE ( 'NONE', *, *, #1031, .T. ) ; +#1100 = EDGE_CURVE ( 'NONE', #904, #1464, #52, .T. ) ; +#1101 = ORIENTED_EDGE ( 'NONE', *, *, #1229, .T. ) ; +#1102 = ORIENTED_EDGE ( 'NONE', *, *, #1038, .F. ) ; +#1103 = PERSON_AND_ORGANIZATION ( #691, #1228 ) ; +#1104 = DATE_AND_TIME ( #1107, #1127 ) ; +#1105 = EDGE_CURVE ( 'NONE', #1275, #904, #47, .T. ) ; +#1106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1107 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1109 = EDGE_CURVE ( 'NONE', #1275, #1350, #49, .T. ) ; +#1110 = EDGE_CURVE ( 'NONE', #1350, #1306, #36, .T. ) ; +#1111 = ORIENTED_EDGE ( 'NONE', *, *, #1230, .T. ) ; +#1112 = VERTEX_POINT ( 'NONE', #1389 ) ; +#1113 = ORIENTED_EDGE ( 'NONE', *, *, #1130, .F. ) ; +#1114 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427522200E-017, 2.500000000000000000, 8.500000000000000000 ) ) ; +#1115 = EDGE_CURVE ( 'NONE', #1306, #793, #34, .T. ) ; +#1116 = PLANE ( 'NONE', #674 ) ; +#1117 = ORIENTED_EDGE ( 'NONE', *, *, #1234, .T. ) ; +#1118 = ORIENTED_EDGE ( 'NONE', *, *, #1260, .F. ) ; +#1119 = EDGE_CURVE ( 'NONE', #558, #793, #32, .T. ) ; +#1120 = ORIENTED_EDGE ( 'NONE', *, *, #1241, .T. ) ; +#1121 = EDGE_CURVE ( 'NONE', #695, #558, #31, .T. ) ; +#1122 = ORIENTED_EDGE ( 'NONE', *, *, #1040, .F. ) ; +#1123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1124 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1125 = ORIENTED_EDGE ( 'NONE', *, *, #1234, .F. ) ; +#1126 = EDGE_CURVE ( 'NONE', #300, #1306, #44, .T. ) ; +#1127 = LOCAL_TIME ( 15, 8, 11.00000000000000000, #1128 ) ; +#1128 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1129 = PERSON_AND_ORGANIZATION ( #691, #1228 ) ; +#1130 = EDGE_CURVE ( 'NONE', #220, #1526, #29, .T. ) ; +#1131 = EDGE_CURVE ( 'NONE', #572, #1561, #22, .T. ) ; +#1132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1133 = EDGE_CURVE ( 'NONE', #80, #1511, #21, .T. ) ; +#1134 = VERTEX_POINT ( 'NONE', #624 ) ; +#1135 = ORIENTED_EDGE ( 'NONE', *, *, #1241, .F. ) ; +#1136 = ORIENTED_EDGE ( 'NONE', *, *, #1131, .T. ) ; +#1137 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -2.499999999999998700, -15.23205080756885900 ) ) ; +#1138 = VERTEX_POINT ( 'NONE', #151 ) ; +#1139 = EDGE_CURVE ( 'NONE', #1492, #1511, #16, .T. ) ; +#1140 = ORIENTED_EDGE ( 'NONE', *, *, #1245, .T. ) ; +#1141 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1142 = EDGE_CURVE ( 'NONE', #1083, #1492, #19, .T. ) ; +#1143 = ORIENTED_EDGE ( 'NONE', *, *, #1044, .T. ) ; +#1144 = ORIENTED_EDGE ( 'NONE', *, *, #1238, .T. ) ; +#1145 = EDGE_CURVE ( 'NONE', #1083, #80, #30, .T. ) ; +#1146 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1147 = ORIENTED_EDGE ( 'NONE', *, *, #1247, .T. ) ; +#1148 = APPROVAL_DATE_TIME ( #1150, #364 ) ; +#1149 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1150 = DATE_AND_TIME ( #1175, #1177 ) ; +#1151 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, 2.499999999999998700, -14.73205080756885900 ) ) ; +#1152 = LINE ( 'NONE', #479, #1552 ) ; +#1153 = EDGE_CURVE ( 'NONE', #995, #238, #12, .T. ) ; +#1154 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -25.93074902771996500, -15.23205080756885900 ) ) ; +#1155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1156 = EDGE_CURVE ( 'NONE', #1340, #238, #14, .T. ) ; +#1157 = EDGE_CURVE ( 'NONE', #1510, #1340, #6, .T. ) ; +#1158 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1159 = EDGE_LOOP ( 'NONE', ( #1341, #1344, #1347, #1356 ) ) ; +#1160 = PLANE ( 'NONE', #701 ) ; +#1161 = EDGE_CURVE ( 'NONE', #1510, #995, #3, .T. ) ; +#1162 = ORIENTED_EDGE ( 'NONE', *, *, #980, .T. ) ; +#1163 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1164 = ORIENTED_EDGE ( 'NONE', *, *, #1245, .F. ) ; +#1165 = EDGE_LOOP ( 'NONE', ( #1051, #1053, #1057, #1072 ) ) ; +#1166 = ORIENTED_EDGE ( 'NONE', *, *, #911, .F. ) ; +#1167 = EDGE_CURVE ( 'NONE', #1346, #238, #345, .T. ) ; +#1168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1169 = ORIENTED_EDGE ( 'NONE', *, *, #1248, .T. ) ; +#1170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1171 = EDGE_CURVE ( 'NONE', #1373, #1340, #1515, .T. ) ; +#1172 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -2.499999999999998700, -7.749999999999996400 ) ) ; +#1173 = ORIENTED_EDGE ( 'NONE', *, *, #1087, .F. ) ; +#1174 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1175 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#1176 = EDGE_CURVE ( 'NONE', #863, #1510, #531, .T. ) ; +#1177 = LOCAL_TIME ( 15, 8, 11.00000000000000000, #1180 ) ; +#1178 = DIRECTION ( 'NONE', ( 1.734723475976807100E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1179 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -25.93074902771996500, -16.74999999999999300 ) ) ; +#1180 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#1181 = CARTESIAN_POINT ( 'NONE', ( 5.999999999999989300, -25.93074902771996500, -16.99999999999999600 ) ) ; +#1182 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1183 = EDGE_CURVE ( 'NONE', #1042, #995, #1517, .T. ) ; +#1184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1185 = EDGE_CURVE ( 'NONE', #1541, #1277, #964, .T. ) ; +#1186 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1187 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999987600, 2.500000000000000000, -16.74999999999999300 ) ) ; +#1188 = EDGE_LOOP ( 'NONE', ( #1408, #1413, #1414, #1423 ) ) ; +#1189 = EDGE_CURVE ( 'NONE', #755, #1024, #1152, .T. ) ; +#1190 = ORIENTED_EDGE ( 'NONE', *, *, #978, .F. ) ; +#1191 = CARTESIAN_POINT ( 'NONE', ( 8.673617379884033500E-016, -2.500000000000000000, 2.500000000000000400 ) ) ; +#1192 = VERTEX_POINT ( 'NONE', #758 ) ; +#1193 = ORIENTED_EDGE ( 'NONE', *, *, #906, .F. ) ; +#1194 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -4.499999999999999100 ) ) ; +#1195 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1196 = ORIENTED_EDGE ( 'NONE', *, *, #1249, .T. ) ; +#1197 = EDGE_CURVE ( 'NONE', #958, #949, #551, .T. ) ; +#1198 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -2.168404344971008900E-016 ) ) ; +#1199 = ORIENTED_EDGE ( 'NONE', *, *, #1091, .F. ) ; +#1200 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1201 = APPROVAL_PERSON_ORGANIZATION ( #1205, #364, #803 ) ; +#1202 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1203 = ORIENTED_EDGE ( 'NONE', *, *, #1248, .F. ) ; +#1204 = EDGE_CURVE ( 'NONE', #528, #1559, #1565, .T. ) ; +#1205 = PERSON_AND_ORGANIZATION ( #691, #1228 ) ; +#1206 = PERSON_AND_ORGANIZATION ( #691, #1228 ) ; +#1207 = EDGE_CURVE ( 'NONE', #590, #1511, #604, .T. ) ; +#1208 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1209 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1210 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1211 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1212 = EDGE_CURVE ( 'NONE', #1523, #1492, #1382, .T. ) ; +#1213 = VERTEX_POINT ( 'NONE', #487 ) ; +#1214 = EDGE_CURVE ( 'NONE', #1138, #1083, #707, .T. ) ; +#1215 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999990200, -25.93074902771996500, -15.74999999999999300 ) ) ; +#1216 = ORIENTED_EDGE ( 'NONE', *, *, #1249, .F. ) ; +#1217 = EDGE_CURVE ( 'NONE', #1269, #80, #1567, .T. ) ; +#1218 = ORIENTED_EDGE ( 'NONE', *, *, #900, .T. ) ; +#1219 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1220 = ORIENTED_EDGE ( 'NONE', *, *, #1254, .T. ) ; +#1221 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1222 = ORIENTED_EDGE ( 'NONE', *, *, #1095, .T. ) ; +#1223 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1224 = ORIENTED_EDGE ( 'NONE', *, *, #1254, .F. ) ; +#1225 = EDGE_CURVE ( 'NONE', #1096, #1410, #225, .T. ) ; +#1226 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999990200, 2.500000000000000000, -15.74999999999999300 ) ) ; +#1227 = ORIENTED_EDGE ( 'NONE', *, *, #898, .T. ) ; +#1228 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#1229 = EDGE_CURVE ( 'NONE', #1461, #799, #1564, .T. ) ; +#1230 = EDGE_CURVE ( 'NONE', #1243, #1526, #699, .T. ) ; +#1231 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1232 = CARTESIAN_POINT ( 'NONE', ( 1.249000902703301100E-014, -25.93074902771996500, -17.99999999999999600 ) ) ; +#1233 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1234 = EDGE_CURVE ( 'NONE', #220, #716, #1351, .T. ) ; +#1235 = ORIENTED_EDGE ( 'NONE', *, *, #1257, .T. ) ; +#1236 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -25.93074902771996500, -8.999999999999998200 ) ) ; +#1237 = EDGE_LOOP ( 'NONE', ( #1020, #1017, #1015, #1022 ) ) ; +#1238 = EDGE_CURVE ( 'NONE', #1561, #1112, #573, .T. ) ; +#1239 = ORIENTED_EDGE ( 'NONE', *, *, #1097, .T. ) ; +#1240 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#1241 = EDGE_CURVE ( 'NONE', #572, #1521, #941, .T. ) ; +#1242 = ORIENTED_EDGE ( 'NONE', *, *, #1257, .F. ) ; +#1243 = VERTEX_POINT ( 'NONE', #165 ) ; +#1244 = ORIENTED_EDGE ( 'NONE', *, *, #894, .T. ) ; +#1245 = EDGE_CURVE ( 'NONE', #1561, #886, #1320, .T. ) ; +#1246 = ORIENTED_EDGE ( 'NONE', *, *, #1265, .T. ) ; +#1247 = EDGE_CURVE ( 'NONE', #1112, #668, #56, .T. ) ; +#1248 = EDGE_CURVE ( 'NONE', #88, #523, #1485, .T. ) ; +#1249 = EDGE_CURVE ( 'NONE', #1525, #751, #1353, .T. ) ; +#1250 = ORIENTED_EDGE ( 'NONE', *, *, #1100, .T. ) ; +#1251 = MANIFOLD_SOLID_BREP ( 'Fillet3', #1494 ) ; +#1252 = VERTEX_POINT ( 'NONE', #912 ) ; +#1253 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1254 = EDGE_CURVE ( 'NONE', #977, #1520, #1470, .T. ) ; +#1255 = PLANE ( 'NONE', #759 ) ; +#1256 = ORIENTED_EDGE ( 'NONE', *, *, #890, .T. ) ; +#1257 = EDGE_CURVE ( 'NONE', #1427, #1464, #1285, .T. ) ; +#1258 = ORIENTED_EDGE ( 'NONE', *, *, #1267, .T. ) ; +#1259 = ORIENTED_EDGE ( 'NONE', *, *, #1105, .T. ) ; +#1260 = EDGE_CURVE ( 'NONE', #572, #220, #1484, .T. ) ; +#1261 = ORIENTED_EDGE ( 'NONE', *, *, #884, .F. ) ; +#1262 = ORIENTED_EDGE ( 'NONE', *, *, #1283, .T. ) ; +#1263 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, 2.500000000000000000, -6.749999999999997300 ) ) ; +#1264 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999999100, -2.500000000000000000, 10.00000000000000000 ) ) ; +#1265 = EDGE_CURVE ( 'NONE', #838, #904, #1441, .T. ) ; +#1266 = EDGE_CURVE ( 'NONE', #913, #793, #1457, .T. ) ; +#1267 = EDGE_CURVE ( 'NONE', #720, #1275, #1439, .T. ) ; +#1268 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1269 = VERTEX_POINT ( 'NONE', #270 ) ; +#1270 = ORIENTED_EDGE ( 'NONE', *, *, #1109, .F. ) ; +#1271 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, 2.500000000000000000, -16.23861278752582000 ) ) ; +#1272 = EDGE_CURVE ( 'NONE', #549, #558, #1419, .T. ) ; +#1273 = ORIENTED_EDGE ( 'NONE', *, *, #1267, .F. ) ; +#1274 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1275 = VERTEX_POINT ( 'NONE', #67 ) ; +#1276 = EDGE_CURVE ( 'NONE', #1192, #1046, #1399, .T. ) ; +#1277 = VERTEX_POINT ( 'NONE', #260 ) ; +#1278 = EDGE_CURVE ( 'NONE', #1495, #485, #1401, .T. ) ; +#1279 = ORIENTED_EDGE ( 'NONE', *, *, #881, .F. ) ; +#1280 = ORIENTED_EDGE ( 'NONE', *, *, #1126, .T. ) ; +#1281 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -8.597800040494614000E-016 ) ) ; +#1282 = VERTEX_POINT ( 'NONE', #1540 ) ; +#1283 = EDGE_CURVE ( 'NONE', #1252, #1350, #1379, .T. ) ; +#1284 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, 2.500000000000000000, -13.49999999999999600 ) ) ; +#1285 = LINE ( 'NONE', #1215, #1471 ) ; +#1286 = EDGE_CURVE ( 'NONE', #1312, #1558, #1364, .T. ) ; +#1287 = EDGE_CURVE ( 'NONE', #1468, #1377, #1367, .T. ) ; +#1288 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -15.23205080756885900 ) ) ; +#1289 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 2.500000000000000400 ) ) ; +#1290 = ORIENTED_EDGE ( 'NONE', *, *, #1110, .F. ) ; +#1291 = CARTESIAN_POINT ( 'NONE', ( 7.499999999999985800, -2.499999999999998700, -18.00000000000000000 ) ) ; +#1292 = ORIENTED_EDGE ( 'NONE', *, *, #1283, .F. ) ; +#1293 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1294 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1295 = ORIENTED_EDGE ( 'NONE', *, *, #877, .F. ) ; +#1296 = ORIENTED_EDGE ( 'NONE', *, *, #1266, .T. ) ; +#1297 = VERTEX_POINT ( 'NONE', #1055 ) ; +#1298 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1299 = ORIENTED_EDGE ( 'NONE', *, *, #1115, .F. ) ; +#1300 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ; +#1301 = EDGE_LOOP ( 'NONE', ( #546, #552, #556, #566 ) ) ; +#1302 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, -16.99999999999999600 ) ) ; +#1303 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1304 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, 2.500000000000000000, -17.99999999999999600 ) ) ; +#1305 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#1306 = VERTEX_POINT ( 'NONE', #369 ) ; +#1307 = ORIENTED_EDGE ( 'NONE', *, *, #1272, .T. ) ; +#1308 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1309 = DIRECTION ( 'NONE', ( -1.734723475976807100E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1310 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.499999999999998700, 10.00000000000000000 ) ) ; +#1311 = ORIENTED_EDGE ( 'NONE', *, *, #1119, .T. ) ; +#1312 = VERTEX_POINT ( 'NONE', #1337 ) ; +#1313 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -25.93074902771996500, -13.49999999999999600 ) ) ; +#1314 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -25.93074902771996500, -16.23861278752582000 ) ) ; +#1315 = ORIENTED_EDGE ( 'NONE', *, *, #1272, .F. ) ; +#1316 = ORIENTED_EDGE ( 'NONE', *, *, #871, .T. ) ; +#1317 = CARTESIAN_POINT ( 'NONE', ( -5.809016994374948300, 2.499999999999998700, -0.5000000000000000000 ) ) ; +#1318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1319 = CARTESIAN_POINT ( 'NONE', ( 1.708171262247572200, -25.93074902771996500, -15.23205080756885900 ) ) ; +#1320 = LINE ( 'NONE', #65, #1486 ) ; +#1321 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1322 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1323 = ORIENTED_EDGE ( 'NONE', *, *, #859, .F. ) ; +#1324 = EDGE_LOOP ( 'NONE', ( #1144, #1147, #1162, #1164 ) ) ; +#1325 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -2.499999999999998700, -13.49999999999999600 ) ) ; +#1326 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999999600, -2.500000000000000000, 10.00000000000000000 ) ) ; +#1327 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1328 = ORIENTED_EDGE ( 'NONE', *, *, #1121, .T. ) ; +#1329 = VERTEX_POINT ( 'NONE', #525 ) ; +#1330 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -2.499999999999998700, -8.999999999999998200 ) ) ; +#1331 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -25.93074902771996500, -15.74999999999999300 ) ) ; +#1332 = VECTOR ( 'NONE', #1416, 1000.000000000000000 ) ; +#1333 = ORIENTED_EDGE ( 'NONE', *, *, #990, .F. ) ; +#1334 = ORIENTED_EDGE ( 'NONE', *, *, #1276, .T. ) ; +#1335 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -25.93074902771996500, -2.249999999999999600 ) ) ; +#1336 = ORIENTED_EDGE ( 'NONE', *, *, #1054, .F. ) ; +#1337 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -2.499999999999998700, -7.749999999999997300 ) ) ; +#1338 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#1339 = ORIENTED_EDGE ( 'NONE', *, *, #1278, .T. ) ; +#1340 = VERTEX_POINT ( 'NONE', #1066 ) ; +#1341 = ORIENTED_EDGE ( 'NONE', *, *, #940, .F. ) ; +#1342 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000400, 2.500000000000000000, 5.000000000000000000 ) ) ; +#1343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1344 = ORIENTED_EDGE ( 'NONE', *, *, #1286, .T. ) ; +#1345 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 6.938893903907231300E-016 ) ) ; +#1346 = VERTEX_POINT ( 'NONE', #1445 ) ; +#1347 = ORIENTED_EDGE ( 'NONE', *, *, #993, .F. ) ; +#1348 = EDGE_LOOP ( 'NONE', ( #725, #729, #734, #735 ) ) ; +#1349 = MECHANICAL_CONTEXT ( 'NONE', #279, 'mechanical' ) ; +#1350 = VERTEX_POINT ( 'NONE', #1548 ) ; +#1351 = LINE ( 'NONE', #152, #1029 ) ; +#1352 = SHAPE_DEFINITION_REPRESENTATION ( #124, #1381 ) ; +#1353 = LINE ( 'NONE', #902, #897 ) ; +#1354 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#1355 = VECTOR ( 'NONE', #75, 1000.000000000000000 ) ; +#1356 = ORIENTED_EDGE ( 'NONE', *, *, #1278, .F. ) ; +#1357 = ORIENTED_EDGE ( 'NONE', *, *, #1286, .F. ) ; +#1358 = ORIENTED_EDGE ( 'NONE', *, *, #936, .T. ) ; +#1359 = ORIENTED_EDGE ( 'NONE', *, *, #1287, .T. ) ; +#1360 = ORIENTED_EDGE ( 'NONE', *, *, #1005, .T. ) ; +#1361 = ORIENTED_EDGE ( 'NONE', *, *, #934, .T. ) ; +#1362 = PLANE ( 'NONE', #802 ) ; +#1363 = ORIENTED_EDGE ( 'NONE', *, *, #1085, .T. ) ; +#1364 = LINE ( 'NONE', #915, #1417 ) ; +#1365 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999993800, -25.93074902771996500, -13.49999999999999600 ) ) ; +#1366 = VECTOR ( 'NONE', #1442, 1000.000000000000000 ) ; +#1367 = LINE ( 'NONE', #785, #1529 ) ; +#1368 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427522200E-017, -2.500000000000000400, 8.500000000000000000 ) ) ; +#1369 = ORIENTED_EDGE ( 'NONE', *, *, #1010, .T. ) ; +#1370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1371 = ORIENTED_EDGE ( 'NONE', *, *, #1287, .F. ) ; +#1372 = ORIENTED_EDGE ( 'NONE', *, *, #1167, .F. ) ; +#1373 = VERTEX_POINT ( 'NONE', #923 ) ; +#1374 = ORIENTED_EDGE ( 'NONE', *, *, #1156, .T. ) ; +#1375 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -7.500000000000000000, 5.000000000000000000 ) ) ; +#1376 = ORIENTED_EDGE ( 'NONE', *, *, #1171, .F. ) ; +#1377 = VERTEX_POINT ( 'NONE', #176 ) ; +#1378 = VECTOR ( 'NONE', #1210, 1000.000000000000000 ) ; +#1379 = LINE ( 'NONE', #1331, #1355 ) ; +#1380 = CARTESIAN_POINT ( 'NONE', ( -2.180415093947896100, -25.93074902771996500, -14.56777736655967600 ) ) ; +#1381 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Spring', ( #1251, #370 ), #385 ) ; +#1382 = LINE ( 'NONE', #1179, #963 ) ; +#1383 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, 2.500000000000000000, -8.999999999999998200 ) ) ; +#1384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1385 = EDGE_LOOP ( 'NONE', ( #991, #994, #1027, #1045 ) ) ; +#1386 = DIRECTION ( 'NONE', ( -1.868163743359639600E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1387 = ORIENTED_EDGE ( 'NONE', *, *, #962, .T. ) ; +#1388 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1389 = CARTESIAN_POINT ( 'NONE', ( 6.181694990624913000, -2.499999999999998700, -0.8333333333333328200 ) ) ; +#1390 = ORIENTED_EDGE ( 'NONE', *, *, #1176, .T. ) ; +#1391 = EDGE_LOOP ( 'NONE', ( #1333, #1334, #1336, #1339 ) ) ; +#1392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1393 = ORIENTED_EDGE ( 'NONE', *, *, #1157, .T. ) ; +#1394 = ORIENTED_EDGE ( 'NONE', *, *, #959, .F. ) ; +#1395 = CARTESIAN_POINT ( 'NONE', ( -2.180415093947897000, 2.500000000000000000, -14.56777736655967600 ) ) ; +#1396 = ORIENTED_EDGE ( 'NONE', *, *, #1183, .T. ) ; +#1397 = VECTOR ( 'NONE', #903, 1000.000000000000000 ) ; +#1398 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1399 = LINE ( 'NONE', #779, #1378 ) ; +#1400 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000900, 2.500000000000000000, -1.250000000000000400 ) ) ; +#1401 = LINE ( 'NONE', #366, #1366 ) ; +#1402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1403 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#1404 = ORIENTED_EDGE ( 'NONE', *, *, #1161, .F. ) ; +#1405 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, 2.500000000000000000, -17.99999999999999600 ) ) ; +#1406 = ORIENTED_EDGE ( 'NONE', *, *, #1176, .F. ) ; +#1407 = CARTESIAN_POINT ( 'NONE', ( -5.421010862427522200E-017, 2.500000000000000000, 6.000000000000000000 ) ) ; +#1408 = ORIENTED_EDGE ( 'NONE', *, *, #955, .F. ) ; +#1409 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1410 = VERTEX_POINT ( 'NONE', #1071 ) ; +#1411 = EDGE_LOOP ( 'NONE', ( #1376, #1387, #1390, #1393 ) ) ; +#1412 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1413 = ORIENTED_EDGE ( 'NONE', *, *, #1167, .T. ) ; +#1414 = ORIENTED_EDGE ( 'NONE', *, *, #1153, .F. ) ; +#1415 = VECTOR ( 'NONE', #372, 1000.000000000000000 ) ; +#1416 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1417 = VECTOR ( 'NONE', #516, 1000.000000000000000 ) ; +#1418 = VECTOR ( 'NONE', #1221, 1000.000000000000000 ) ; +#1419 = LINE ( 'NONE', #1335, #1397 ) ; +#1420 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#1421 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1422 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#1423 = ORIENTED_EDGE ( 'NONE', *, *, #1183, .F. ) ; +#1424 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1425 = ORIENTED_EDGE ( 'NONE', *, *, #999, .F. ) ; +#1426 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1427 = VERTEX_POINT ( 'NONE', #272 ) ; +#1428 = ORIENTED_EDGE ( 'NONE', *, *, #835, .F. ) ; +#1429 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999996400, -2.499999999999998700, -6.749999999999997300 ) ) ; +#1430 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999997300, -25.93074902771996500, -7.749999999999997300 ) ) ; +#1431 = ORIENTED_EDGE ( 'NONE', *, *, #983, .F. ) ; +#1432 = EDGE_LOOP ( 'NONE', ( #1135, #1136, #1140, #1143 ) ) ; +#1433 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374948300, -25.93074902771996500, -0.5000000000000000000 ) ) ; +#1434 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1435 = ORIENTED_EDGE ( 'NONE', *, *, #1247, .F. ) ; +#1436 = VECTOR ( 'NONE', #1544, 1000.000000000000000 ) ; +#1437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1439 = LINE ( 'NONE', #1061, #1415 ) ; +#1440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1441 = LINE ( 'NONE', #671, #1436 ) ; +#1442 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1443 = CARTESIAN_POINT ( 'NONE', ( -1.708171262247574000, -2.499999999999998700, -14.73205080756885900 ) ) ; +#1444 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000000400, 2.500000000000000000, 5.000000000000000000 ) ) ; +#1445 = CARTESIAN_POINT ( 'NONE', ( 3.499999999999985800, -2.499999999999998700, -16.23861278752582000 ) ) ; +#1446 = ORIENTED_EDGE ( 'NONE', *, *, #1009, .F. ) ; +#1447 = ORIENTED_EDGE ( 'NONE', *, *, #1276, .F. ) ; +#1448 = ORIENTED_EDGE ( 'NONE', *, *, #989, .F. ) ; +#1449 = ORIENTED_EDGE ( 'NONE', *, *, #841, .F. ) ; +#1450 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -13.49999999999999600 ) ) ; +#1451 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, -2.499999999999998700, -1.250000000000000000 ) ) ; +#1452 = ORIENTED_EDGE ( 'NONE', *, *, #1025, .F. ) ; +#1453 = ORIENTED_EDGE ( 'NONE', *, *, #1230, .F. ) ; +#1454 = ORIENTED_EDGE ( 'NONE', *, *, #1035, .F. ) ; +#1455 = VECTOR ( 'NONE', #650, 1000.000000000000000 ) ; +#1456 = DIRECTION ( 'NONE', ( -1.000000000000000000, -1.734723475976807100E-016, 0.0000000000000000000 ) ) ; +#1457 = LINE ( 'NONE', #1069, #1418 ) ; +#1458 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1459 = VECTOR ( 'NONE', #263, 1000.000000000000000 ) ; +#1460 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#1461 = VERTEX_POINT ( 'NONE', #375 ) ; +#1462 = EDGE_LOOP ( 'NONE', ( #703, #711, #715, #718 ) ) ; +#1463 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1464 = VERTEX_POINT ( 'NONE', #1226 ) ; +#1465 = ORIENTED_EDGE ( 'NONE', *, *, #1225, .F. ) ; +#1466 = ORIENTED_EDGE ( 'NONE', *, *, #930, .F. ) ; +#1467 = ORIENTED_EDGE ( 'NONE', *, *, #1229, .F. ) ; +#1468 = VERTEX_POINT ( 'NONE', #673 ) ; +#1469 = ORIENTED_EDGE ( 'NONE', *, *, #1018, .F. ) ; +#1470 = LINE ( 'NONE', #72, #1459 ) ; +#1471 = VECTOR ( 'NONE', #170, 1000.000000000000000 ) ; +#1472 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1473 = CARTESIAN_POINT ( 'NONE', ( 5.250000000000000000, 2.500000000000000000, -2.250000000000000400 ) ) ; +#1474 = VERTEX_POINT ( 'NONE', #1338 ) ; +#1475 = ORIENTED_EDGE ( 'NONE', *, *, #1085, .F. ) ; +#1476 = DIRECTION ( 'NONE', ( 1.000000000000000000, 1.734723475976807100E-016, -0.0000000000000000000 ) ) ; +#1477 = ORIENTED_EDGE ( 'NONE', *, *, #972, .F. ) ; +#1478 = ORIENTED_EDGE ( 'NONE', *, *, #1079, .F. ) ; +#1479 = ORIENTED_EDGE ( 'NONE', *, *, #1185, .F. ) ; +#1480 = ORIENTED_EDGE ( 'NONE', *, *, #862, .F. ) ; +#1481 = ORIENTED_EDGE ( 'NONE', *, *, #1076, .F. ) ; +#1482 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000900, -2.500000000000000000, 2.500000000000000400 ) ) ; +#1483 = ORIENTED_EDGE ( 'NONE', *, *, #851, .F. ) ; +#1484 = CIRCLE ( 'NONE', #387, 1.250000000000001100 ) ; +#1485 = LINE ( 'NONE', #513, #1568 ) ; +#1486 = VECTOR ( 'NONE', #257, 1000.000000000000000 ) ; +#1487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ; +#1488 = ORIENTED_EDGE ( 'NONE', *, *, #867, .F. ) ; +#1489 = CARTESIAN_POINT ( 'NONE', ( -1.925929944387235900E-031, 2.500000000000000000, 2.500000000000000400 ) ) ; +#1490 = ORIENTED_EDGE ( 'NONE', *, *, #1185, .T. ) ; +#1491 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1492 = VERTEX_POINT ( 'NONE', #533 ) ; +#1493 = EDGE_LOOP ( 'NONE', ( #935, #937, #938, #942 ) ) ; +#1494 = CLOSED_SHELL ( 'NONE', ( #499, #421, #454, #557, #591, #425, #589, #520, #419, #448, #473, #410, #522, #428, #504, #585, #400, #536, #394, #508, #466, #494, #470, #408, #478, #507, #437, #445, #481, #575, #554, #534, #544, #541, #491, #561, #402, #434, #562, #451, #570, #581, #598, #483 ) ) ; +#1495 = VERTEX_POINT ( 'NONE', #1451 ) ; +#1496 = VECTOR ( 'NONE', #1209, 1000.000000000000000 ) ; +#1497 = EDGE_LOOP ( 'NONE', ( #1295, #1296, #1299, #1011 ) ) ; +#1498 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999999100, -2.500000000000000000, 0.0000000000000000000 ) ) ; +#1499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1500 = VECTOR ( 'NONE', #1186, 1000.000000000000000 ) ; +#1501 = CARTESIAN_POINT ( 'NONE', ( -7.500000000000000000, 2.500000000000000000, 10.00000000000000000 ) ) ; +#1502 = CARTESIAN_POINT ( 'NONE', ( -7.499999999999999100, -2.500000000000000000, 10.00000000000000000 ) ) ; +#1503 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, 2.500000000000000000, -13.49999999999999600 ) ) ; +#1504 = VERTEX_POINT ( 'NONE', #1553 ) ; +#1505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1506 = CARTESIAN_POINT ( 'NONE', ( 5.999999999999989300, -2.499999999999998700, -16.99999999999999600 ) ) ; +#1507 = EDGE_LOOP ( 'NONE', ( #1075, #1077, #1080, #1082 ) ) ; +#1508 = EDGE_LOOP ( 'NONE', ( #576, #577, #547, #752, #596, #597, #602, #610, #613, #616, #618, #620, #623, #635, #637 ) ) ; +#1509 = EDGE_LOOP ( 'NONE', ( #843, #749, #526, #530 ) ) ; +#1510 = VERTEX_POINT ( 'NONE', #78 ) ; +#1511 = VERTEX_POINT ( 'NONE', #798 ) ; +#1512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1513 = EDGE_LOOP ( 'NONE', ( #1446, #1447, #1448, #1449 ) ) ; +#1514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1515 = LINE ( 'NONE', #41, #312 ) ; +#1516 = CARTESIAN_POINT ( 'NONE', ( 4.336808689942015800E-016, 7.523163845262636800E-032, 2.500000000000000400 ) ) ; +#1517 = LINE ( 'NONE', #235, #90 ) ; +#1518 = CARTESIAN_POINT ( 'NONE', ( -5.250000000000000000, 2.500000000000000000, -4.499999999999999100 ) ) ; +#1519 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#1520 = VERTEX_POINT ( 'NONE', #791 ) ; +#1521 = VERTEX_POINT ( 'NONE', #82 ) ; +#1522 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999992000, -2.499999999999998700, -13.49999999999999600 ) ) ; +#1523 = VERTEX_POINT ( 'NONE', #676 ) ; +#1524 = EDGE_LOOP ( 'NONE', ( #1357, #1358, #1359, #1360 ) ) ; +#1525 = VERTEX_POINT ( 'NONE', #929 ) ; +#1526 = VERTEX_POINT ( 'NONE', #180 ) ; +#1527 = EDGE_LOOP ( 'NONE', ( #737, #744, #746, #753 ) ) ; +#1528 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1529 = VECTOR ( 'NONE', #267, 1000.000000000000000 ) ; +#1530 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1531 = VECTOR ( 'NONE', #754, 1000.000000000000000 ) ; +#1532 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1533 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#1534 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1535 = EDGE_LOOP ( 'NONE', ( #1556, #1256, #1258, #1259 ) ) ; +#1536 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1537 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1538 = EDGE_LOOP ( 'NONE', ( #1224, #1227, #1235, #1239 ) ) ; +#1539 = CARTESIAN_POINT ( 'NONE', ( -3.499999999999987600, -2.499999999999998700, 0.0000000000000000000 ) ) ; +#1540 = CARTESIAN_POINT ( 'NONE', ( 7.500000000000000900, -2.500000000000000000, 0.0000000000000000000 ) ) ; +#1541 = VERTEX_POINT ( 'NONE', #1078 ) ; +#1542 = CARTESIAN_POINT ( 'NONE', ( 5.249999999999995600, -25.93074902771996500, -8.999999999999998200 ) ) ; +#1543 = EDGE_LOOP ( 'NONE', ( #1118, #1120, #1122, #1125 ) ) ; +#1544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#1545 = VERTEX_POINT ( 'NONE', #273 ) ; +#1546 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, -2.499999999999998700, -17.99999999999999600 ) ) ; +#1547 = EDGE_LOOP ( 'NONE', ( #1216, #1218, #1220, #1222 ) ) ; +#1548 = CARTESIAN_POINT ( 'NONE', ( -5.249999999999986700, 2.500000000000000000, -15.74999999999999300 ) ) ; +#1549 = EDGE_LOOP ( 'NONE', ( #1477, #1478, #1479, #1480 ) ) ; +#1550 = VECTOR ( 'NONE', #497, 1000.000000000000000 ) ; +#1551 = DIRECTION ( 'NONE', ( 1.868163743359639600E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1552 = VECTOR ( 'NONE', #640, 1000.000000000000000 ) ; +#1553 = CARTESIAN_POINT ( 'NONE', ( 5.809016994374947500, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#1554 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1555 = EDGE_LOOP ( 'NONE', ( #1361, #1363, #1369, #1371 ) ) ; +#1556 = ORIENTED_EDGE ( 'NONE', *, *, #1265, .F. ) ; +#1557 = EDGE_LOOP ( 'NONE', ( #1039, #888, #889, #892 ) ) ; +#1558 = VERTEX_POINT ( 'NONE', #380 ) ; +#1559 = VERTEX_POINT ( 'NONE', #1342 ) ; +#1560 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#1561 = VERTEX_POINT ( 'NONE', #538 ) ; +#1562 = EDGE_LOOP ( 'NONE', ( #907, #910, #917, #919 ) ) ; +#1563 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1564 = LINE ( 'NONE', #887, #1455 ) ; +#1565 = LINE ( 'NONE', #51, #37 ) ; +#1566 = EDGE_LOOP ( 'NONE', ( #1261, #1262, #1270, #1273 ) ) ; +#1567 = LINE ( 'NONE', #247, #1500 ) ; +#1568 = VECTOR ( 'NONE', #663, 1000.000000000000000 ) ; +#1569 = VECTOR ( 'NONE', #158, 1000.000000000000000 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Spring_Cap.step b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Spring_Cap.step new file mode 100644 index 0000000..b9a33f4 --- /dev/null +++ b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STEP/Trigger_Spring_Cap.step @@ -0,0 +1,468 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP203' ), + '1' ); +FILE_NAME ('Trigger_Spring_Cap.STEP', + '2013-11-14T05:07:58', + ( '' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2013', + '' ); +FILE_SCHEMA (( 'CONFIG_CONTROL_DESIGN' )); +ENDSEC; + +DATA; +#1 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#2 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #34 ) ; +#3 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#4 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#5 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ; +#6 = ORIENTED_EDGE ( 'NONE', *, *, #384, .F. ) ; +#7 = LINE ( 'NONE', #251, #112 ) ; +#8 = EDGE_CURVE ( 'NONE', #209, #437, #159, .T. ) ; +#9 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#10 = VECTOR ( 'NONE', #197, 1000.000000000000000 ) ; +#11 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998200, 0.0000000000000000000, -0.9999999999999997800 ) ) ; +#12 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#13 = CIRCLE ( 'NONE', #360, 2.500000000000000000 ) ; +#14 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#15 = VECTOR ( 'NONE', #161, 1000.000000000000000 ) ; +#16 = FACE_BOUND ( 'NONE', #417, .T. ) ; +#17 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#18 = LINE ( 'NONE', #420, #10 ) ; +#19 = LINE ( 'NONE', #297, #15 ) ; +#20 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#21 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#22 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000001800, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#23 = VECTOR ( 'NONE', #114, 1000.000000000000000 ) ; +#24 = CIRCLE ( 'NONE', #361, 5.000000000000000900 ) ; +#25 = LINE ( 'NONE', #262, #393 ) ; +#26 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#27 = LINE ( 'NONE', #42, #97 ) ; +#28 = CIRCLE ( 'NONE', #359, 2.500000000000001300 ) ; +#29 = EDGE_CURVE ( 'NONE', #426, #407, #443, .T. ) ; +#30 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#31 = DIRECTION ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#32 = CIRCLE ( 'NONE', #362, 5.000000000000000000 ) ; +#33 = APPROVAL_PERSON_ORGANIZATION ( #392, #340, #186 ) ; +#34 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#35 = VECTOR ( 'NONE', #84, 1000.000000000000000 ) ; +#36 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#37 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#38 = EDGE_CURVE ( 'NONE', #389, #409, #160, .T. ) ; +#39 = VECTOR ( 'NONE', #45, 1000.000000000000000 ) ; +#40 = LINE ( 'NONE', #72, #23 ) ; +#41 = VECTOR ( 'NONE', #175, 1000.000000000000000 ) ; +#42 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#43 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#44 = LINE ( 'NONE', #153, #41 ) ; +#45 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#46 = APPROVAL_DATE_TIME ( #135, #340 ) ; +#47 = CIRCLE ( 'NONE', #377, 2.500000000000000000 ) ; +#48 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#49 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#50 = PERSON_AND_ORGANIZATION ( #176, #195 ) ; +#51 = VECTOR ( 'NONE', #385, 1000.000000000000000 ) ; +#52 = CYLINDRICAL_SURFACE ( 'NONE', #366, 2.500000000000000000 ) ; +#53 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #440, 'distance_accuracy_value', 'NONE'); +#54 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#55 = VERTEX_POINT ( 'NONE', #48 ) ; +#56 = APPROVAL_PERSON_ORGANIZATION ( #217, #304, #248 ) ; +#57 = DATE_AND_TIME ( #73, #444 ) ; +#58 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#59 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'detail', '', ( #191 ) ) ; +#60 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#61 = LINE ( 'NONE', #12, #39 ) ; +#62 = CIRCLE ( 'NONE', #367, 2.500000000000000000 ) ; +#63 = CIRCLE ( 'NONE', #364, 5.000000000000000000 ) ; +#64 = CYLINDRICAL_SURFACE ( 'NONE', #380, 2.500000000000000000 ) ; +#65 = LINE ( 'NONE', #324, #51 ) ; +#66 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#67 = CYLINDRICAL_SURFACE ( 'NONE', #383, 2.500000000000001300 ) ; +#68 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#69 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#70 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#71 = CC_DESIGN_SECURITY_CLASSIFICATION ( #139, ( #331 ) ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000001800, 2.500000000000000000, -1.000000000000000000 ) ) ; +#73 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#74 = FACE_OUTER_BOUND ( 'NONE', #343, .T. ) ; +#75 = FACE_OUTER_BOUND ( 'NONE', #398, .T. ) ; +#76 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#77 = PLANE ( 'NONE', #396 ) ; +#78 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ; +#79 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#80 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ; +#81 = EDGE_CURVE ( 'NONE', #101, #55, #151, .T. ) ; +#82 = FACE_OUTER_BOUND ( 'NONE', #365, .T. ) ; +#83 = CYLINDRICAL_SURFACE ( 'NONE', #390, 5.000000000000000900 ) ; +#84 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#85 = FACE_OUTER_BOUND ( 'NONE', #321, .T. ) ; +#86 = FACE_OUTER_BOUND ( 'NONE', #445, .T. ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -3.500000000000000000 ) ) ; +#88 = CC_DESIGN_APPROVAL ( #99, ( #139 ) ) ; +#89 = FACE_BOUND ( 'NONE', #327, .T. ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#91 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#92 = FACE_OUTER_BOUND ( 'NONE', #273, .T. ) ; +#93 = SECURITY_CLASSIFICATION_LEVEL ( 'unclassified' ) ; +#94 = FACE_OUTER_BOUND ( 'NONE', #446, .T. ) ; +#95 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#96 = FACE_OUTER_BOUND ( 'NONE', #341, .T. ) ; +#97 = VECTOR ( 'NONE', #203, 1000.000000000000000 ) ; +#98 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#99 = APPROVAL ( #357, 'UNSPECIFIED' ) ; +#100 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#101 = VERTEX_POINT ( 'NONE', #22 ) ; +#102 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#103 = VERTEX_POINT ( 'NONE', #270 ) ; +#104 = FACE_OUTER_BOUND ( 'NONE', #206, .T. ) ; +#105 = CYLINDRICAL_SURFACE ( 'NONE', #388, 5.000000000000000000 ) ; +#106 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#107 = DIRECTION ( 'NONE', ( 2.602085213965210600E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#108 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #57, #127, ( #139 ) ) ; +#109 = DIRECTION ( 'NONE', ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ; +#110 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#111 = FACE_OUTER_BOUND ( 'NONE', #418, .T. ) ; +#112 = VECTOR ( 'NONE', #277, 1000.000000000000000 ) ; +#113 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#114 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#115 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #451 ) ; +#116 = SHAPE_DEFINITION_REPRESENTATION ( #269, #119 ) ; +#117 = LINE ( 'NONE', #148, #35 ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, 2.500000000000000000, -0.9999999999999997800 ) ) ; +#119 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Spring_Cap', ( #115, #349 ), #355 ) ; +#120 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#121 = FACE_OUTER_BOUND ( 'NONE', #363, .T. ) ; +#122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#123 = LINE ( 'NONE', #90, #356 ) ; +#124 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#125 = LINE ( 'NONE', #144, #268 ) ; +#126 = PERSON_AND_ORGANIZATION_ROLE ( 'design_owner' ) ; +#127 = DATE_TIME_ROLE ( 'classification_date' ) ; +#128 = VECTOR ( 'NONE', #246, 1000.000000000000000 ) ; +#129 = CIRCLE ( 'NONE', #402, 5.000000000000000000 ) ; +#130 = CIRCLE ( 'NONE', #404, 2.500000000000001300 ) ; +#131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#132 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #50, #310, ( #139 ) ) ; +#133 = VECTOR ( 'NONE', #247, 1000.000000000000000 ) ; +#134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#135 = DATE_AND_TIME ( #216, #208 ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#137 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ; +#138 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#139 = SECURITY_CLASSIFICATION ( '', '', #93 ) ; +#140 = DATE_AND_TIME ( #220, #435 ) ; +#141 = CIRCLE ( 'NONE', #401, 2.500000000000000000 ) ; +#142 = PLANE ( 'NONE', #373 ) ; +#143 = LINE ( 'NONE', #21, #128 ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#146 = VECTOR ( 'NONE', #156, 1000.000000000000000 ) ; +#147 = APPROVAL_DATE_TIME ( #397, #304 ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -3.500000000000000000 ) ) ; +#149 = EDGE_CURVE ( 'NONE', #55, #329, #154, .T. ) ; +#150 = PERSON_AND_ORGANIZATION ( #176, #195 ) ; +#151 = LINE ( 'NONE', #449, #133 ) ; +#152 = VECTOR ( 'NONE', #14, 1000.000000000000000 ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#154 = CIRCLE ( 'NONE', #405, 5.000000000000000900 ) ; +#155 = VECTOR ( 'NONE', #300, 1000.000000000000000 ) ; +#156 = DIRECTION ( 'NONE', ( -2.602085213965210600E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#157 = APPLICATION_PROTOCOL_DEFINITION ( 'international standard', 'config_control_design', 1994, #352 ) ; +#158 = APPROVAL_ROLE ( '' ) ; +#159 = LINE ( 'NONE', #326, #155 ) ; +#160 = LINE ( 'NONE', #239, #146 ) ; +#161 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#162 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ; +#163 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ; +#164 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#165 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#166 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000001800, 2.500000000000000000, -1.000000000000000000 ) ) ; +#169 = ORIENTED_EDGE ( 'NONE', *, *, #422, .T. ) ; +#170 = ORIENTED_EDGE ( 'NONE', *, *, #406, .F. ) ; +#171 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 2.602085213965210600E-015 ) ) ; +#172 = PLANE ( 'NONE', #395 ) ; +#173 = DIRECTION ( 'NONE', ( -2.602085213965210600E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#174 = ORIENTED_EDGE ( 'NONE', *, *, #411, .F. ) ; +#175 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#176 = PERSON ( 'UNSPECIFIED', 'UNSPECIFIED', 'UNSPECIFIED', ('UNSPECIFIED'), ('UNSPECIFIED'), ('UNSPECIFIED') ) ; +#177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#178 = VERTEX_POINT ( 'NONE', #215 ) ; +#179 = ORIENTED_EDGE ( 'NONE', *, *, #413, .F. ) ; +#180 = ORIENTED_EDGE ( 'NONE', *, *, #419, .T. ) ; +#181 = CIRCLE ( 'NONE', #358, 5.000000000000000000 ) ; +#182 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ; +#183 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#184 = ORIENTED_EDGE ( 'NONE', *, *, #415, .F. ) ; +#185 = ORIENTED_EDGE ( 'NONE', *, *, #416, .T. ) ; +#186 = APPROVAL_ROLE ( '' ) ; +#187 = ORIENTED_EDGE ( 'NONE', *, *, #415, .T. ) ; +#188 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #381, #274, ( #331 ) ) ; +#189 = ORIENTED_EDGE ( 'NONE', *, *, #421, .T. ) ; +#190 = LINE ( 'NONE', #425, #261 ) ; +#191 = PRODUCT ( 'Trigger_Spring_Cap', 'Trigger_Spring_Cap', '', ( #309 ) ) ; +#192 = EDGE_CURVE ( 'NONE', #437, #389, #130, .T. ) ; +#193 = ORIENTED_EDGE ( 'NONE', *, *, #433, .T. ) ; +#194 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#195 = ORGANIZATION ( 'UNSPECIFIED', 'UNSPECIFIED', '' ) ; +#196 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#197 = DIRECTION ( 'NONE', ( -2.602085213965210600E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#198 = DATE_AND_TIME ( #299, #225 ) ; +#199 = ORIENTED_EDGE ( 'NONE', *, *, #413, .T. ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#201 = EDGE_CURVE ( 'NONE', #329, #407, #143, .T. ) ; +#202 = ORIENTED_EDGE ( 'NONE', *, *, #423, .T. ) ; +#203 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#204 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#205 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998200, 2.500000000000000000, -0.9999999999999997800 ) ) ; +#206 = EDGE_LOOP ( 'NONE', ( #162, #6, #376, #187 ) ) ; +#207 = ORIENTED_EDGE ( 'NONE', *, *, #424, .F. ) ; +#208 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #124 ) ; +#209 = VERTEX_POINT ( 'NONE', #344 ) ; +#210 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #428, #58, ( #331 ) ) ; +#211 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ; +#212 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ; +#213 = EDGE_CURVE ( 'NONE', #407, #325, #129, .T. ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #368, .F. ) ; +#215 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, -1.000000000000000000 ) ) ; +#216 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#217 = PERSON_AND_ORGANIZATION ( #176, #195 ) ; +#218 = EDGE_CURVE ( 'NONE', #354, #209, #141, .T. ) ; +#219 = DATE_TIME_ROLE ( 'creation_date' ) ; +#220 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#221 = ORIENTED_EDGE ( 'NONE', *, *, #422, .F. ) ; +#222 = ORIENTED_EDGE ( 'NONE', *, *, #149, .F. ) ; +#223 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ; +#224 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ; +#225 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #284 ) ; +#226 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.734723475976807100E-015 ) ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ; +#228 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#229 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#230 = APPROVAL_PERSON_ORGANIZATION ( #150, #99, #158 ) ; +#231 = VERTEX_POINT ( 'NONE', #168 ) ; +#232 = PLANE ( 'NONE', #379 ) ; +#233 = ORIENTED_EDGE ( 'NONE', *, *, #213, .F. ) ; +#234 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, 2.500000000000000000, -0.9999999999999997800 ) ) ; +#235 = ORIENTED_EDGE ( 'NONE', *, *, #201, .F. ) ; +#236 = ORIENTED_EDGE ( 'NONE', *, *, #192, .T. ) ; +#237 = ORIENTED_EDGE ( 'NONE', *, *, #38, .T. ) ; +#238 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#240 = ORIENTED_EDGE ( 'NONE', *, *, #406, .T. ) ; +#241 = ORIENTED_EDGE ( 'NONE', *, *, #218, .T. ) ; +#242 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ; +#243 = ORIENTED_EDGE ( 'NONE', *, *, #8, .T. ) ; +#244 = ORIENTED_EDGE ( 'NONE', *, *, #149, .T. ) ; +#245 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#246 = DIRECTION ( 'NONE', ( -2.602085213965210600E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#247 = DIRECTION ( 'NONE', ( 1.734723475976807100E-015, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#248 = APPROVAL_ROLE ( '' ) ; +#249 = ORIENTED_EDGE ( 'NONE', *, *, #264, .F. ) ; +#250 = ORIENTED_EDGE ( 'NONE', *, *, #416, .F. ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#252 = ORIENTED_EDGE ( 'NONE', *, *, #384, .T. ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#254 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#255 = PLANE ( 'NONE', #386 ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -6.000000000000000000 ) ) ; +#257 = ORIENTED_EDGE ( 'NONE', *, *, #201, .T. ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#260 = ORIENTED_EDGE ( 'NONE', *, *, #192, .F. ) ; +#261 = VECTOR ( 'NONE', #1, 1000.000000000000000 ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( 2.499999999999998200, 2.500000000000000000, -0.9999999999999997800 ) ) ; +#263 = ORIENTED_EDGE ( 'NONE', *, *, #378, .F. ) ; +#264 = EDGE_CURVE ( 'NONE', #399, #329, #123, .T. ) ; +#265 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ; +#266 = CYLINDRICAL_SURFACE ( 'NONE', #387, 5.000000000000000000 ) ; +#267 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ; +#268 = VECTOR ( 'NONE', #173, 1000.000000000000000 ) ; +#269 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #346 ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -3.500000000000000000 ) ) ; +#271 = ORIENTED_EDGE ( 'NONE', *, *, #38, .F. ) ; +#272 = PERSON_AND_ORGANIZATION ( #176, #195 ) ; +#273 = EDGE_LOOP ( 'NONE', ( #244, #249, #250, #252 ) ) ; +#274 = PERSON_AND_ORGANIZATION_ROLE ( 'design_supplier' ) ; +#275 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #353 ) ; +#276 = ORIENTED_EDGE ( 'NONE', *, *, #433, .F. ) ; +#277 = DIRECTION ( 'NONE', ( 1.734723475976807100E-015, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#278 = ORIENTED_EDGE ( 'NONE', *, *, #213, .T. ) ; +#279 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ; +#280 = CC_DESIGN_APPROVAL ( #304, ( #331 ) ) ; +#281 = PLANE ( 'NONE', #394 ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -1.000000000000000000 ) ) ; +#283 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ; +#284 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#285 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#286 = ORIENTED_EDGE ( 'NONE', *, *, #424, .T. ) ; +#287 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -6.000000000000000000 ) ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#289 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 2.602085213965210600E-015 ) ) ; +#290 = ORIENTED_EDGE ( 'NONE', *, *, #411, .T. ) ; +#291 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#293 = ORIENTED_EDGE ( 'NONE', *, *, #368, .T. ) ; +#294 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#295 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#296 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 2.500000000000000000, -6.000000000000000000 ) ) ; +#298 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ; +#299 = CALENDAR_DATE ( 2013, 14, 11 ) ; +#300 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#301 = APPROVAL_DATE_TIME ( #140, #99 ) ; +#302 = ORIENTED_EDGE ( 'NONE', *, *, #421, .F. ) ; +#303 = ORIENTED_EDGE ( 'NONE', *, *, #264, .T. ) ; +#304 = APPROVAL ( #26, 'UNSPECIFIED' ) ; +#305 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#306 = ORIENTED_EDGE ( 'NONE', *, *, #419, .F. ) ; +#307 = ORIENTED_EDGE ( 'NONE', *, *, #432, .T. ) ; +#308 = ORIENTED_EDGE ( 'NONE', *, *, #218, .F. ) ; +#309 = MECHANICAL_CONTEXT ( 'NONE', #34, 'mechanical' ) ; +#310 = PERSON_AND_ORGANIZATION_ROLE ( 'classification_officer' ) ; +#311 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#312 = ORIENTED_EDGE ( 'NONE', *, *, #8, .F. ) ; +#313 = ORIENTED_EDGE ( 'NONE', *, *, #432, .F. ) ; +#314 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#315 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ; +#316 = ORIENTED_EDGE ( 'NONE', *, *, #378, .T. ) ; +#317 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#318 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#319 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#320 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#321 = EDGE_LOOP ( 'NONE', ( #257, #298, #302, #303 ) ) ; +#322 = VERTEX_POINT ( 'NONE', #256 ) ; +#323 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#325 = VERTEX_POINT ( 'NONE', #287 ) ; +#326 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#327 = EDGE_LOOP ( 'NONE', ( #207, #211, #212, #214, #221 ) ) ; +#328 = ADVANCED_FACE ( 'NONE', ( #111 ), #77, .T. ) ; +#329 = VERTEX_POINT ( 'NONE', #447 ) ; +#330 = ADVANCED_FACE ( 'NONE', ( #94, #16 ), #172, .F. ) ; +#331 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #191, .NOT_KNOWN. ) ; +#332 = CC_DESIGN_DATE_AND_TIME_ASSIGNMENT ( #198, #219, ( #346 ) ) ; +#333 = ADVANCED_FACE ( 'NONE', ( #96, #89 ), #281, .T. ) ; +#334 = ADVANCED_FACE ( 'NONE', ( #92 ), #83, .T. ) ; +#335 = ADVANCED_FACE ( 'NONE', ( #86 ), #105, .T. ) ; +#336 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #408, #450, ( #346 ) ) ; +#337 = ADVANCED_FACE ( 'NONE', ( #121 ), #266, .T. ) ; +#338 = CC_DESIGN_APPROVAL ( #340, ( #346 ) ) ; +#339 = ADVANCED_FACE ( 'NONE', ( #104 ), #255, .F. ) ; +#340 = APPROVAL ( #412, 'UNSPECIFIED' ) ; +#341 = EDGE_LOOP ( 'NONE', ( #185, #189, #193, #199, #202 ) ) ; +#342 = ADVANCED_FACE ( 'NONE', ( #82 ), #67, .F. ) ; +#343 = EDGE_LOOP ( 'NONE', ( #271, #283, #286, #290 ) ) ; +#344 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#345 = ADVANCED_FACE ( 'NONE', ( #75 ), #64, .F. ) ; +#346 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #331, #439 ) ; +#347 = ADVANCED_FACE ( 'NONE', ( #85 ), #232, .F. ) ; +#348 = CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT ( #272, #126, ( #191 ) ) ; +#349 = AXIS2_PLACEMENT_3D ( 'NONE', #68, #254, #91 ) ; +#350 = ADVANCED_FACE ( 'NONE', ( #74 ), #142, .T. ) ; +#351 = ADVANCED_FACE ( 'NONE', ( #374 ), #52, .F. ) ; +#352 = APPLICATION_CONTEXT ( 'configuration controlled 3d designs of mechanical parts and assemblies' ) ; +#353 = COORDINATED_UNIVERSAL_TIME_OFFSET ( 10, 0, .AHEAD. ) ; +#354 = VERTEX_POINT ( 'NONE', #87 ) ; +#355 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #53 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #440, #165, #430 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#356 = VECTOR ( 'NONE', #434, 1000.000000000000000 ) ; +#357 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#358 = AXIS2_PLACEMENT_3D ( 'NONE', #282, #100, #318 ) ; +#359 = AXIS2_PLACEMENT_3D ( 'NONE', #259, #79, #295 ) ; +#360 = AXIS2_PLACEMENT_3D ( 'NONE', #78, #294, #110 ) ; +#361 = AXIS2_PLACEMENT_3D ( 'NONE', #95, #314, #131 ) ; +#362 = AXIS2_PLACEMENT_3D ( 'NONE', #288, #106, #320 ) ; +#363 = EDGE_LOOP ( 'NONE', ( #306, #276, #279, #278 ) ) ; +#364 = AXIS2_PLACEMENT_3D ( 'NONE', #5, #229, #36 ) ; +#365 = EDGE_LOOP ( 'NONE', ( #260, #263, #265, #267 ) ) ; +#366 = AXIS2_PLACEMENT_3D ( 'NONE', #242, #17, #49 ) ; +#367 = AXIS2_PLACEMENT_3D ( 'NONE', #80, #296, #113 ) ; +#368 = EDGE_CURVE ( 'NONE', #103, #178, #62, .T. ) ; +#369 = EDGE_CURVE ( 'NONE', #178, #372, #65, .T. ) ; +#370 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#371 = DIRECTION ( 'NONE', ( 2.602085213965210600E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#372 = VERTEX_POINT ( 'NONE', #145 ) ; +#373 = AXIS2_PLACEMENT_3D ( 'NONE', #37, #171, #371 ) ; +#374 = FACE_OUTER_BOUND ( 'NONE', #400, .T. ) ; +#375 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#376 = ORIENTED_EDGE ( 'NONE', *, *, #423, .F. ) ; +#377 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #177, #204 ) ; +#378 = EDGE_CURVE ( 'NONE', #372, #437, #44, .T. ) ; +#379 = AXIS2_PLACEMENT_3D ( 'NONE', #76, #289, #107 ) ; +#380 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #138, #438 ) ; +#381 = PERSON_AND_ORGANIZATION ( #176, #195 ) ; +#382 = VERTEX_POINT ( 'NONE', #205 ) ; +#383 = AXIS2_PLACEMENT_3D ( 'NONE', #285, #69, #102 ) ; +#384 = EDGE_CURVE ( 'NONE', #442, #55, #61, .T. ) ; +#385 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#386 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #226, #31 ) ; +#387 = AXIS2_PLACEMENT_3D ( 'NONE', #227, #194, #319 ) ; +#388 = AXIS2_PLACEMENT_3D ( 'NONE', #137, #370, #166 ) ; +#389 = VERTEX_POINT ( 'NONE', #258 ) ; +#390 = AXIS2_PLACEMENT_3D ( 'NONE', #429, #164, #66 ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( -1.734723475976807100E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#392 = PERSON_AND_ORGANIZATION ( #176, #195 ) ; +#393 = VECTOR ( 'NONE', #43, 1000.000000000000000 ) ; +#394 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #317, #134 ) ; +#395 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #9, #70 ) ; +#396 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #109, #323 ) ; +#397 = DATE_AND_TIME ( #120, #275 ) ; +#398 = EDGE_LOOP ( 'NONE', ( #291, #293, #307, #308 ) ) ; +#399 = VERTEX_POINT ( 'NONE', #238 ) ; +#400 = EDGE_LOOP ( 'NONE', ( #169, #163, #170, #174 ) ) ; +#401 = AXIS2_PLACEMENT_3D ( 'NONE', #196, #4, #228 ) ; +#402 = AXIS2_PLACEMENT_3D ( 'NONE', #20, #245, #375 ) ; +#403 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#404 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #305, #122 ) ; +#405 = AXIS2_PLACEMENT_3D ( 'NONE', #403, #183, #448 ) ; +#406 = EDGE_CURVE ( 'NONE', #409, #354, #47, .T. ) ; +#407 = VERTEX_POINT ( 'NONE', #441 ) ; +#408 = PERSON_AND_ORGANIZATION ( #176, #195 ) ; +#409 = VERTEX_POINT ( 'NONE', #11 ) ; +#410 = EDGE_CURVE ( 'NONE', #103, #354, #117, .T. ) ; +#411 = EDGE_CURVE ( 'NONE', #382, #409, #25, .T. ) ; +#412 = APPROVAL_STATUS ( 'not_yet_approved' ) ; +#413 = EDGE_CURVE ( 'NONE', #322, #231, #63, .T. ) ; +#414 = EDGE_CURVE ( 'NONE', #325, #101, #32, .T. ) ; +#415 = EDGE_CURVE ( 'NONE', #231, #101, #40, .T. ) ; +#416 = EDGE_CURVE ( 'NONE', #442, #399, #24, .T. ) ; +#417 = EDGE_LOOP ( 'NONE', ( #236, #237, #240, #241, #243 ) ) ; +#418 = EDGE_LOOP ( 'NONE', ( #312, #313, #315, #316 ) ) ; +#419 = EDGE_CURVE ( 'NONE', #322, #325, #19, .T. ) ; +#420 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#421 = EDGE_CURVE ( 'NONE', #399, #426, #18, .T. ) ; +#422 = EDGE_CURVE ( 'NONE', #382, #103, #13, .T. ) ; +#423 = EDGE_CURVE ( 'NONE', #231, #442, #7, .T. ) ; +#424 = EDGE_CURVE ( 'NONE', #436, #382, #125, .T. ) ; +#425 = CARTESIAN_POINT ( 'NONE', ( -2.500000000000001800, 2.500000000000000000, -1.000000000000000000 ) ) ; +#426 = VERTEX_POINT ( 'NONE', #234 ) ; +#427 = EDGE_CURVE ( 'NONE', #372, #436, #28, .T. ) ; +#428 = PERSON_AND_ORGANIZATION ( #176, #195 ) ; +#429 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ; +#430 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#431 = EDGE_CURVE ( 'NONE', #436, #389, #27, .T. ) ; +#432 = EDGE_CURVE ( 'NONE', #178, #209, #190, .T. ) ; +#433 = EDGE_CURVE ( 'NONE', #426, #322, #181, .T. ) ; +#434 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#435 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #311 ) ; +#436 = VERTEX_POINT ( 'NONE', #253 ) ; +#437 = VERTEX_POINT ( 'NONE', #30 ) ; +#438 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#439 = DESIGN_CONTEXT ( 'detailed design', #352, 'design' ) ; +#440 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#441 = CARTESIAN_POINT ( 'NONE', ( 4.999999999999998200, 0.0000000000000000000, -0.9999999999999997800 ) ) ; +#442 = VERTEX_POINT ( 'NONE', #136 ) ; +#443 = LINE ( 'NONE', #118, #152 ) ; +#444 = LOCAL_TIME ( 15, 7, 58.00000000000000000, #60 ) ; +#445 = EDGE_LOOP ( 'NONE', ( #179, #180, #182, #184 ) ) ; +#446 = EDGE_LOOP ( 'NONE', ( #222, #223, #224, #233, #235 ) ) ; +#447 = CARTESIAN_POINT ( 'NONE', ( 5.000000000000000900, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( -5.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#450 = PERSON_AND_ORGANIZATION_ROLE ( 'creator' ) ; +#451 = CLOSED_SHELL ( 'NONE', ( #351, #335, #333, #330, #334, #347, #337, #339, #342, #350, #345, #328 ) ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Barrel.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Barrel.stl new file mode 100644 index 0000000..bae12ea Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Barrel.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Barrel_Shaft.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Barrel_Shaft.stl new file mode 100644 index 0000000..8112d6a Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Barrel_Shaft.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Barrel_Shaft_Cap.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Barrel_Shaft_Cap.stl new file mode 100644 index 0000000..4fe5631 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Barrel_Shaft_Cap.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Body.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Body.stl new file mode 100644 index 0000000..4d8cbd6 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Body.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Front_Block.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Front_Block.stl new file mode 100644 index 0000000..522bc2e Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Front_Block.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Hammer_Slide.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Hammer_Slide.stl new file mode 100644 index 0000000..8a3e831 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Hammer_Slide.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Handle.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Handle.stl new file mode 100644 index 0000000..3831587 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Handle.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Lock.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Lock.stl new file mode 100644 index 0000000..294c2d2 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Lock.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Long_Hammer_Slide_Pin.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Long_Hammer_Slide_Pin.stl new file mode 100644 index 0000000..e4ca848 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Long_Hammer_Slide_Pin.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Short_Hammer_Slide_Pin.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Short_Hammer_Slide_Pin.stl new file mode 100644 index 0000000..fb32971 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Short_Hammer_Slide_Pin.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger.stl new file mode 100644 index 0000000..31f8789 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Guard.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Guard.stl new file mode 100644 index 0000000..97cf82c Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Guard.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Guide.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Guide.stl new file mode 100644 index 0000000..375d7ce Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Guide.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Spring.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Spring.stl new file mode 100644 index 0000000..0877d78 Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Spring.stl differ diff --git a/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Spring_Cap.stl b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Spring_Cap.stl new file mode 100644 index 0000000..5175a7c Binary files /dev/null and b/Firearms/The_Experiment_Remake_Pepperbox-Rollatroll/STL/Trigger_Spring_Cap.stl differ