Mirrors
/
fosscad-repo-frozen
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Fixing typo.

This commit is contained in:
user 2019-01-31 22:01:24 -08:00
parent 0cdec25216
commit 7f9cb9d16e
1 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Rifles/AR-15_30_Round_Magazine-Ivanthetroll/README.md
View File

@ -57,8 +57,8 @@ I imagine people will run into the same issues that I did. I will touch on the
* **1.** Bad feeding due to rounds nosediving in the mag
* **a.** Take a screwdriver and push the follower down. It should feel smooth. If it isnt, then your mag body internal may be too rough, your follower may have warped when printing, or your spring (if DIYed) may be too wide (wasnt wrapped tight enough when you wound it).
* **i.** Troubleshoot by swapping to a PMAG spring if you can. If that makes it smoother, then your DIY spring is at fault.
ii. If it snags at a certain spot in its travel when you push it with a screwdriver, that spot probably has an artifact/burr than needs to be sanded or filed down.
* **i.** Troubleshoot by swapping to a PMAG spring if you can. If that makes it smoother, then your DIY spring is at fault.
* **ii.** If it snags at a certain spot in its travel when you push it with a screwdriver, that spot probably has an artifact/burr than needs to be sanded or filed down.
* **b.** If you are using a DIY spring, your spring pressure may be too low. Try stretching the spring out a little.
i. Swap out with a PMAG spring. If it doesnt nosedive rounds, then your spring pressure might be too low.
* **2.** Mag lips cracking