Upgrading 22_Semi_Automatic_Pistol-Proteus with fixes and community suggestions.

Firearms/22_Semi_Automatic_Pistol-Proteus/README.md

@@ -1,10 +1,6 @@
 # Semiautomatic (Rimfire) Printable Firearm in .22 LR
 
-#### Author
+#### Version
-
-Proteus
-
-# Version
 
 1.0
 
@@ -12,12 +8,12 @@ Proteus
 
 NO
 
-#### Description
+#### Descriptions  
 
 These files contain the design for a 3D printed .22 LR Semiautomatic firearm, meant to be used as a handgun. This design uses a modified 10/22
 magazine, HOWEVER, it must be printed and the resulting magazine will NOT work in a 10/22 rifle.
 
-#### Features
+##### Features
 * Rifled Barrel for ATF compliance
 * Metal insert for case extraction
 * Easy to use magazine release/catch
@@ -25,12 +21,13 @@ magazine, HOWEVER, it must be printed and the resulting magazine will NOT work i
 * Can accept either a 10 or 30 round magazine
 * Almost entirely polymer, lightweight
 
-#### Instructions:
+#### Instructions
+
 Print out all parts included except the firing pin and AR-15 FCG simulations. The receiver must be in a material that can be
 fused, preferably using MEK. MEK works well on ABS plastic so this is reccomended. Do not use PLA for anything, unless you are an
 Australian police force.
 
-Obtain the following metal parts:
+##### Obtain the following metal parts
 * AR-15 FCG (These may be possible to print in the future)
 * 1x8mm Metal insert (This is the same as the insert used in the Reprringer v2.0 pistol and is use for extraction)
 * Ruger 10/22 Magazine spring
@@ -45,12 +42,14 @@ the receiver and bolt. The .44 bullets need to be secured using something such a
 
 You will also want to either print or purchase an AR-15 pistol grip.
 
-#### Safety/Disclaimer
+#### Disclaimer
+
 The creator of this weapon is not responsible for any injuries or legal problems that arise from creating and firing this design.
 You, the manufacturer, take responsibility for any issues that may come. Take precautions when firing (Fire with a string for first
 shots) and be sure to follow all local firearms laws. 
 
 #### Legality
+
 This weapon is NOT legal to print in California, unless you are an FFL or an FFL modifies this design (Zip Gun Law). The 30 round magazine
 may not be legal in your area. This weapon is NOT legal to print in NYC, as weapons made on 3D printers are prohibited. If you
 are in the U.S., the Undetectable Firearms Act may apply, in which case you will need to epoxy 3.7 oz of steel into the receiver.
@@ -59,8 +58,6 @@ Even if your area is not listed here, be aware of your local laws.
 #### Credits
 
 Created by Proteus
-
 Credit for trigger section of receiver goes to Shanrilivan for his Charon v3.0 design
-
 Credit for the original 10/22 magazine design goes to nilsson.