Adding PM522 Washbear Revolver version 2.0 by JamesRPatrick.

Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/README.md

@@ -0,0 +1,78 @@
+# JamesRPatrick PM522 Washbear .22LR Revolver
+
+#### Author
+JamesRPatrick
+
+#### Version
+2.0
+
+#### License
+Copyright Jamesrpatrick.com 2015 distributed under the GNU General Public License v3.0 (GPLv3).
+
+#### Release Date
+2015/11/15
+
+#### Description
+This is a 6-shot, double-action-only 3D-printed pistol chambered in .22LR. A roofing nail is used as the firing pin, and elastic bands are used as springs. Steel barrel or chamber liners are not required but will significantly extend the life of the cylinder. The cylinder version that accepts chamber inserts has a capacity of 8 rounds. When the trigger is at rest in the forward position, the cylinder is rotated such that the firing pin is not in line with any cartridge, making this firearm drop-safe. 100% printed barrels are not intended to have a long service life. Works best with subsonic ammunition.
+
+Special thanks to FP of FOSSCAD for printing and test firing this design.
+
+#### Test Fire
+https://youtu.be/PCZfIwuS4JM
+
+#### Test Record
+* 2015/09/13 Version 1.0 Tension Cylinder Assembly was printed in ABS. It failed after three shots. The tension bars and cylinder core sheared cleanly at the point where the bullet sits in the chamber.
+
+* 2015/09/18 Version 1.1 Resin Cylinder 1v3 was printed in ABS and filled with fiberglass and resin. It fired all six shots but was damaged beyond repair. The chambers cracked between layers.
+
+* 2015/09/23 Version 1.1 Solid ABS Cylinder Assembly with steel chamber inserts fired all six shots succesffully.
+
+* 2014/10/01 Version 1.1 Solid Nylon Cylinder Assembly (Taulman Bridge) fired five shots without damage. [World Record!]
+
+* 2015/11/15 Version 2.0 Solid ABS Cylinder Assembly with steel chamber inserts fired all eight shots successfully.
+
+#### Printing
+* DO NOT USE PLA
+* Requires a print bed of at least 11" diameter or at least 10" x 6" rectangular area.
+* All printed parts are to be printed with 100% infill, with maximum shells. Print in ABS unless otherwise instructed.
+* If using chamber inserts, the cylinder parts may be printed in ABS.
+* If using a 100% printed Cylinder Assembly, the Front Cylinder Assembly and Rear Index Ring MUST be printed in Nylon. Taulman Bridge is the only successful filament so far.
+* Use plenty of support material.
+* Print Frame and Grip on their right sides.
+* Print Front Cylinder Assembly standing on its front end (larger end). 
+* Print Trigger on its left side.
+* Print Striker, Guide Rod, and Sear on their sides. 
+
+#### Finishing
+* DO NOT DRY FIRE
+* DO NOT DRILL HOLES IN FRAME ABOVE CYLINDER
+* Some parts require epoxy to assemble. Use a high strength epoxy made for ABS and Nylon, such as Loctite Epoxy Plastic Bonder.
+* Install the legally required amount of detectable metal in the Grip using high-strength epoxy. Use acetone or epoxy to secure the Grip Cap.
+* Use a 2mm, a 6mm, and an 8mm drill bit to ream appropriate holes.
+* Use 1.75mm filament to secure the Grip Pin. 
+* Use a 1", 12 Gauge roofing nail with 0.281" head. 12 gauge is 2.680mm diameter.
+* Grind tip of Firing Pin to a horizontal, 1mm-wide blade with 0.040" MAX protrusion. Trim the nail head to fit in the Striker. See CAD for dimensions.
+* Use epoxy to secure the Firing Pin to the Firing Pin Retainer. 
+* Use epoxy or acetone welding to secure the Firing Pin and Firing Pin Retainer inside the front of the Striker.
+* Use rubber bands or condoms to power the Striker, Trigger, and Sear. 1/4" dental bands have been used successfully.
+* Use epoxy or acetone welding to bond the Rear Index Ring to the Front Cylinder Assembly. Sand rear surface of the Cylinder to fit.
+* Chamber inserts are cut from 9/32" OD, 0.225" ID, 0.028" Wall 316 Stainless Steel tubing. McMaster-Carr part #1800T301
+* Cut tubing into 34mm lengths and deburr.
+* See renders for part layout.
+
+
+#### Changes
+1. Changes from 1.0:
+  * Thickened Tension Bars and modified cylinder assembly parts to fit Tension Bars.
+  * Thickened frame above cutout for cylinder assembly.
+2. Changes from 1.1:
+  * Moved the firing pin location to 2 o'clock position. Modified the Frame, Striker, Firing Pin Retainer, and Firing Pin to accommodate this.
+  * Added a tab to the Firing Pin Retainer and coresponding notch in the Striker to ensure proper assembly.
+  * Moved bores farther from axis of cylinder by 1.5mm. Modified Frame to accommodate this.
+  * Small cosmetic change to the bottom of the Grip.
+  * Added tab to Sear Pin and corresponding notch in Trigger to allow for disassembly of these parts (no adhesive required now).
+
+#### DISCLAIMER
+
+Use this information at your own risk and responsibility.
+

Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/STEP/PM522CylinderRod2.stp

@@ -0,0 +1,805 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM522\\STEP2.0\\PM522CylinderRod2.stp','2015-10-01T18:17:55',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM522CylinderRod2','PM522CylinderRod2',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(-2.0,10.0,0.0));
+#69=DIRECTION('',(1.0,0.0,0.0));
+#70=DIRECTION('',(0.0,0.0,-1.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=PLANE('',#71);
+#73=CARTESIAN_POINT('',(-2.0,-2.23606797749979,-84.0));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(-2.0,-2.449294E-016,-85.0));
+#76=VERTEX_POINT('',#75);
+#77=CARTESIAN_POINT('',(-2.0,-2.236067977499778,-84.0));
+#78=CARTESIAN_POINT('',(-2.0,-0.894427190999901,-84.999999999999986));
+#79=CARTESIAN_POINT('',(-2.0,0.0,-85.0));
+#87=(BOUNDED_CURVE()B_SPLINE_CURVE(2,(#77,#78,#79),.UNSPECIFIED.,.F.,.U.)B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.0,0.248057135275672),.UNSPECIFIED.)CURVE()GEOMETRIC_REPRESENTATION_ITEM()RATIONAL_B_SPLINE_CURVE((1.0,1.118033988750008,1.0))REPRESENTATION_ITEM(''));
+#88=EDGE_CURVE('',#74,#76,#87,.T.);
+#89=ORIENTED_EDGE('',*,*,#88,.F.);
+#90=CARTESIAN_POINT('',(-2.0,-2.23606797749979,0.0));
+#91=VERTEX_POINT('',#90);
+#92=CARTESIAN_POINT('',(-2.0,-2.23606797749979,0.0));
+#93=DIRECTION('',(0.0,0.0,-1.0));
+#94=VECTOR('',#93,84.0);
+#95=LINE('',#92,#94);
+#96=EDGE_CURVE('',#91,#74,#95,.T.);
+#97=ORIENTED_EDGE('',*,*,#96,.F.);
+#98=CARTESIAN_POINT('',(-2.0,-36.236067977499793,0.0));
+#99=VERTEX_POINT('',#98);
+#100=CARTESIAN_POINT('',(-2.0,-36.236067977499793,0.0));
+#101=DIRECTION('',(0.0,1.0,0.0));
+#102=VECTOR('',#101,34.0);
+#103=LINE('',#100,#102);
+#104=EDGE_CURVE('',#99,#91,#103,.T.);
+#105=ORIENTED_EDGE('',*,*,#104,.F.);
+#106=CARTESIAN_POINT('',(-2.0,-36.236067977499793,4.0));
+#107=VERTEX_POINT('',#106);
+#108=CARTESIAN_POINT('',(-2.0,-36.236067977499793,4.0));
+#109=DIRECTION('',(0.0,0.0,-1.0));
+#110=VECTOR('',#109,4.0);
+#111=LINE('',#108,#110);
+#112=EDGE_CURVE('',#107,#99,#111,.T.);
+#113=ORIENTED_EDGE('',*,*,#112,.F.);
+#114=CARTESIAN_POINT('',(-2.0,-30.732050807568875,4.0));
+#115=VERTEX_POINT('',#114);
+#116=CARTESIAN_POINT('',(-2.0,-30.732050807568875,4.0));
+#117=DIRECTION('',(0.0,-1.0,0.0));
+#118=VECTOR('',#117,5.504017169930911);
+#119=LINE('',#116,#118);
+#120=EDGE_CURVE('',#115,#107,#119,.T.);
+#121=ORIENTED_EDGE('',*,*,#120,.F.);
+#122=CARTESIAN_POINT('',(-2.0,-30.732050807568875,8.0));
+#123=VERTEX_POINT('',#122);
+#124=CARTESIAN_POINT('',(-2.0,-30.732050807568875,8.0));
+#125=DIRECTION('',(0.0,0.0,-1.0));
+#126=VECTOR('',#125,4.0);
+#127=LINE('',#124,#126);
+#128=EDGE_CURVE('',#123,#115,#127,.T.);
+#129=ORIENTED_EDGE('',*,*,#128,.F.);
+#130=CARTESIAN_POINT('',(-2.0,2.23606797749979,8.0));
+#131=VERTEX_POINT('',#130);
+#132=CARTESIAN_POINT('',(-2.0,2.236067977499791,8.0));
+#133=DIRECTION('',(0.0,-1.0,0.0));
+#134=VECTOR('',#133,32.968118785068668);
+#135=LINE('',#132,#134);
+#136=EDGE_CURVE('',#131,#123,#135,.T.);
+#137=ORIENTED_EDGE('',*,*,#136,.F.);
+#138=CARTESIAN_POINT('',(-2.0,2.23606797749979,-84.0));
+#139=VERTEX_POINT('',#138);
+#140=CARTESIAN_POINT('',(-2.0,2.23606797749979,-84.0));
+#141=DIRECTION('',(0.0,0.0,1.0));
+#142=VECTOR('',#141,92.0);
+#143=LINE('',#140,#142);
+#144=EDGE_CURVE('',#139,#131,#143,.T.);
+#145=ORIENTED_EDGE('',*,*,#144,.F.);
+#146=CARTESIAN_POINT('',(-2.0,0.0,-85.0));
+#147=CARTESIAN_POINT('',(-2.0,0.894427190999901,-85.000000000000014));
+#148=CARTESIAN_POINT('',(-2.0,2.236067977499778,-84.0));
+#156=(BOUNDED_CURVE()B_SPLINE_CURVE(2,(#146,#147,#148),.UNSPECIFIED.,.F.,.U.)B_SPLINE_CURVE_WITH_KNOTS((3,3),(0.248057135275672,0.496114270551345),.UNSPECIFIED.)CURVE()GEOMETRIC_REPRESENTATION_ITEM()RATIONAL_B_SPLINE_CURVE((1.0,1.118033988750008,1.0))REPRESENTATION_ITEM(''));
+#157=EDGE_CURVE('',#76,#139,#156,.T.);
+#158=ORIENTED_EDGE('',*,*,#157,.F.);
+#159=EDGE_LOOP('',(#89,#97,#105,#113,#121,#129,#137,#145,#158));
+#160=FACE_OUTER_BOUND('',#159,.T.);
+#161=ADVANCED_FACE('',(#160),#72,.F.);
+#162=CARTESIAN_POINT('',(0.200000000000008,-34.000000000000007,4.0));
+#163=DIRECTION('',(0.0,0.0,1.0));
+#164=DIRECTION('',(1.0,0.0,0.0));
+#165=AXIS2_PLACEMENT_3D('',#162,#163,#164);
+#166=PLANE('',#165);
+#167=ORIENTED_EDGE('',*,*,#120,.T.);
+#168=CARTESIAN_POINT('',(4.440892E-015,-37.0,4.0));
+#169=VERTEX_POINT('',#168);
+#170=CARTESIAN_POINT('',(4.260856E-015,-34.0,4.0));
+#171=DIRECTION('',(0.0,0.0,-1.0));
+#172=DIRECTION('',(-0.707106781186548,-0.707106781186547,0.0));
+#173=AXIS2_PLACEMENT_3D('',#170,#171,#172);
+#174=CIRCLE('',#173,3.0);
+#175=EDGE_CURVE('',#169,#107,#174,.T.);
+#176=ORIENTED_EDGE('',*,*,#175,.F.);
+#177=CARTESIAN_POINT('',(5.400000000000014,-37.0,4.0));
+#178=VERTEX_POINT('',#177);
+#179=CARTESIAN_POINT('',(5.400000000000013,-37.0,4.0));
+#180=DIRECTION('',(-1.0,0.0,0.0));
+#181=VECTOR('',#180,5.400000000000008);
+#182=LINE('',#179,#181);
+#183=EDGE_CURVE('',#178,#169,#182,.T.);
+#184=ORIENTED_EDGE('',*,*,#183,.F.);
+#185=CARTESIAN_POINT('',(3.400000000000014,-35.0,4.0));
+#186=VERTEX_POINT('',#185);
+#187=CARTESIAN_POINT('',(5.400000000000014,-35.0,4.0));
+#188=DIRECTION('',(0.0,0.0,-1.0));
+#189=DIRECTION('',(-0.707106781186547,-0.707106781186548,0.0));
+#190=AXIS2_PLACEMENT_3D('',#187,#188,#189);
+#191=CIRCLE('',#190,2.0);
+#192=EDGE_CURVE('',#186,#178,#191,.F.);
+#193=ORIENTED_EDGE('',*,*,#192,.F.);
+#194=CARTESIAN_POINT('',(3.400000000000013,-33.0,4.0));
+#195=VERTEX_POINT('',#194);
+#196=CARTESIAN_POINT('',(3.400000000000013,-33.000000000000007,4.0));
+#197=DIRECTION('',(0.0,-1.0,0.0));
+#198=VECTOR('',#197,1.999999999999993);
+#199=LINE('',#196,#198);
+#200=EDGE_CURVE('',#195,#186,#199,.T.);
+#201=ORIENTED_EDGE('',*,*,#200,.F.);
+#202=CARTESIAN_POINT('',(1.400000000000012,-31.0,4.0));
+#203=VERTEX_POINT('',#202);
+#204=CARTESIAN_POINT('',(1.400000000000013,-33.0,4.0));
+#205=DIRECTION('',(0.0,0.0,1.0));
+#206=DIRECTION('',(0.707106781186547,0.707106781186548,0.0));
+#207=AXIS2_PLACEMENT_3D('',#204,#205,#206);
+#208=CIRCLE('',#207,2.0);
+#209=EDGE_CURVE('',#195,#203,#208,.T.);
+#210=ORIENTED_EDGE('',*,*,#209,.T.);
+#211=CARTESIAN_POINT('',(-0.999999999999997,-31.0,4.0));
+#212=VERTEX_POINT('',#211);
+#213=CARTESIAN_POINT('',(-0.999999999999997,-31.0,4.0));
+#214=DIRECTION('',(1.0,0.0,0.0));
+#215=VECTOR('',#214,2.400000000000009);
+#216=LINE('',#213,#215);
+#217=EDGE_CURVE('',#212,#203,#216,.T.);
+#218=ORIENTED_EDGE('',*,*,#217,.F.);
+#219=CARTESIAN_POINT('',(-0.999999999999997,-29.0,4.0));
+#220=DIRECTION('',(0.0,0.0,-1.0));
+#221=DIRECTION('',(-0.707106781186547,-0.707106781186548,0.0));
+#222=AXIS2_PLACEMENT_3D('',#219,#220,#221);
+#223=CIRCLE('',#222,2.0);
+#224=EDGE_CURVE('',#115,#212,#223,.F.);
+#225=ORIENTED_EDGE('',*,*,#224,.F.);
+#226=EDGE_LOOP('',(#167,#176,#184,#193,#201,#210,#218,#225));
+#227=FACE_OUTER_BOUND('',#226,.T.);
+#228=ADVANCED_FACE('',(#227),#166,.T.);
+#229=CARTESIAN_POINT('',(4.260856E-015,-34.0,0.0));
+#230=DIRECTION('',(0.0,0.0,1.0));
+#231=DIRECTION('',(-0.707106781186548,-0.707106781186547,0.0));
+#232=AXIS2_PLACEMENT_3D('',#229,#230,#231);
+#233=CYLINDRICAL_SURFACE('',#232,3.0);
+#234=ORIENTED_EDGE('',*,*,#112,.T.);
+#235=CARTESIAN_POINT('',(4.440892E-015,-37.0,0.0));
+#236=VERTEX_POINT('',#235);
+#237=CARTESIAN_POINT('',(4.260856E-015,-34.0,0.0));
+#238=DIRECTION('',(0.0,0.0,1.0));
+#239=DIRECTION('',(-0.707106781186548,-0.707106781186547,0.0));
+#240=AXIS2_PLACEMENT_3D('',#237,#238,#239);
+#241=CIRCLE('',#240,3.0);
+#242=EDGE_CURVE('',#99,#236,#241,.T.);
+#243=ORIENTED_EDGE('',*,*,#242,.T.);
+#244=CARTESIAN_POINT('',(4.260856E-015,-37.0,0.0));
+#245=DIRECTION('',(0.0,0.0,1.0));
+#246=VECTOR('',#245,4.0);
+#247=LINE('',#244,#246);
+#248=EDGE_CURVE('',#236,#169,#247,.T.);
+#249=ORIENTED_EDGE('',*,*,#248,.T.);
+#250=ORIENTED_EDGE('',*,*,#175,.T.);
+#251=EDGE_LOOP('',(#234,#243,#249,#250));
+#252=FACE_OUTER_BOUND('',#251,.T.);
+#253=ADVANCED_FACE('',(#252),#233,.T.);
+#254=CARTESIAN_POINT('',(-0.106839673462534,0.139236173282444,0.0));
+#255=DIRECTION('',(0.0,0.0,1.0));
+#256=DIRECTION('',(1.0,0.0,0.0));
+#257=AXIS2_PLACEMENT_3D('',#254,#255,#256);
+#258=PLANE('',#257);
+#259=ORIENTED_EDGE('',*,*,#104,.T.);
+#260=CARTESIAN_POINT('',(0.776457135307561,2.897777478867205,0.0));
+#261=VERTEX_POINT('',#260);
+#262=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#263=DIRECTION('',(0.0,0.0,1.0));
+#264=DIRECTION('',(1.0,0.0,0.0));
+#265=AXIS2_PLACEMENT_3D('',#262,#263,#264);
+#266=CIRCLE('',#265,3.0);
+#267=EDGE_CURVE('',#91,#261,#266,.T.);
+#268=ORIENTED_EDGE('',*,*,#267,.T.);
+#269=CARTESIAN_POINT('',(14.258819045102518,-0.714810506926474,0.0));
+#270=VERTEX_POINT('',#269);
+#271=CARTESIAN_POINT('',(14.258819045102518,-0.714810506926474,0.0));
+#272=DIRECTION('',(-0.965925826289068,0.25881904510252,0.0));
+#273=VECTOR('',#272,13.957968140878911);
+#274=LINE('',#271,#273);
+#275=EDGE_CURVE('',#270,#261,#274,.T.);
+#276=ORIENTED_EDGE('',*,*,#275,.F.);
+#277=CARTESIAN_POINT('',(14.999999999999998,-1.680736333215545,0.0));
+#278=VERTEX_POINT('',#277);
+#279=CARTESIAN_POINT('',(13.999999999999996,-1.680736333215544,0.0));
+#280=DIRECTION('',(0.0,0.0,1.0));
+#281=DIRECTION('',(0.793353340291235,0.60876142900872,0.0));
+#282=AXIS2_PLACEMENT_3D('',#279,#280,#281);
+#283=CIRCLE('',#282,1.0);
+#284=EDGE_CURVE('',#278,#270,#283,.T.);
+#285=ORIENTED_EDGE('',*,*,#284,.F.);
+#286=CARTESIAN_POINT('',(15.000000000000004,-37.0,0.0));
+#287=VERTEX_POINT('',#286);
+#288=CARTESIAN_POINT('',(15.000000000000004,-37.0,0.0));
+#289=DIRECTION('',(0.0,1.0,0.0));
+#290=VECTOR('',#289,35.319263666784458);
+#291=LINE('',#288,#290);
+#292=EDGE_CURVE('',#287,#278,#291,.T.);
+#293=ORIENTED_EDGE('',*,*,#292,.F.);
+#294=CARTESIAN_POINT('',(4.440892E-015,-37.0,0.0));
+#295=DIRECTION('',(1.0,0.0,0.0));
+#296=VECTOR('',#295,15.0);
+#297=LINE('',#294,#296);
+#298=EDGE_CURVE('',#236,#287,#297,.T.);
+#299=ORIENTED_EDGE('',*,*,#298,.F.);
+#300=ORIENTED_EDGE('',*,*,#242,.F.);
+#301=EDGE_LOOP('',(#259,#268,#276,#285,#293,#299,#300));
+#302=FACE_OUTER_BOUND('',#301,.T.);
+#303=ADVANCED_FACE('',(#302),#258,.F.);
+#304=CARTESIAN_POINT('',(9.999999999999995,-29.0,0.0));
+#305=DIRECTION('',(0.0,0.0,1.0));
+#306=DIRECTION('',(0.707106781186547,-0.707106781186548,0.0));
+#307=AXIS2_PLACEMENT_3D('',#304,#305,#306);
+#308=CYLINDRICAL_SURFACE('',#307,2.0);
+#309=CARTESIAN_POINT('',(9.999999999999996,-31.0,4.0));
+#310=VERTEX_POINT('',#309);
+#311=CARTESIAN_POINT('',(11.999999999999995,-29.0,4.0));
+#312=VERTEX_POINT('',#311);
+#313=CARTESIAN_POINT('',(9.999999999999995,-29.0,4.0));
+#314=DIRECTION('',(0.0,0.0,1.0));
+#315=DIRECTION('',(0.707106781186547,-0.707106781186548,0.0));
+#316=AXIS2_PLACEMENT_3D('',#313,#314,#315);
+#317=CIRCLE('',#316,2.0);
+#318=EDGE_CURVE('',#310,#312,#317,.T.);
+#319=ORIENTED_EDGE('',*,*,#318,.F.);
+#320=CARTESIAN_POINT('',(9.999999999999995,-31.0,8.0));
+#321=VERTEX_POINT('',#320);
+#322=CARTESIAN_POINT('',(9.999999999999995,-31.0,4.0));
+#323=DIRECTION('',(0.0,0.0,1.0));
+#324=VECTOR('',#323,4.0);
+#325=LINE('',#322,#324);
+#326=EDGE_CURVE('',#310,#321,#325,.T.);
+#327=ORIENTED_EDGE('',*,*,#326,.T.);
+#328=CARTESIAN_POINT('',(11.999999999999995,-29.0,8.0));
+#329=VERTEX_POINT('',#328);
+#330=CARTESIAN_POINT('',(9.999999999999995,-29.0,8.0));
+#331=DIRECTION('',(0.0,0.0,1.0));
+#332=DIRECTION('',(0.707106781186547,-0.707106781186548,0.0));
+#333=AXIS2_PLACEMENT_3D('',#330,#331,#332);
+#334=CIRCLE('',#333,2.0);
+#335=EDGE_CURVE('',#321,#329,#334,.T.);
+#336=ORIENTED_EDGE('',*,*,#335,.T.);
+#337=CARTESIAN_POINT('',(11.999999999999995,-29.0,8.0));
+#338=DIRECTION('',(0.0,0.0,-1.0));
+#339=VECTOR('',#338,4.0);
+#340=LINE('',#337,#339);
+#341=EDGE_CURVE('',#329,#312,#340,.T.);
+#342=ORIENTED_EDGE('',*,*,#341,.T.);
+#343=EDGE_LOOP('',(#319,#327,#336,#342));
+#344=FACE_OUTER_BOUND('',#343,.T.);
+#345=ADVANCED_FACE('',(#344),#308,.F.);
+#346=CARTESIAN_POINT('',(11.999999999999995,-31.0,0.0));
+#347=DIRECTION('',(0.0,-1.0,0.0));
+#348=DIRECTION('',(0.0,0.0,-1.0));
+#349=AXIS2_PLACEMENT_3D('',#346,#347,#348);
+#350=PLANE('',#349);
+#351=ORIENTED_EDGE('',*,*,#326,.F.);
+#352=CARTESIAN_POINT('',(7.999999999999995,-31.0,6.000000000000001));
+#353=VERTEX_POINT('',#352);
+#354=CARTESIAN_POINT('',(9.999999999999996,-31.0,6.000000000000001));
+#355=DIRECTION('',(0.0,1.0,0.0));
+#356=DIRECTION('',(-0.707106781186548,0.0,-0.707106781186548));
+#357=AXIS2_PLACEMENT_3D('',#354,#355,#356);
+#358=CIRCLE('',#357,2.0);
+#359=EDGE_CURVE('',#310,#353,#358,.T.);
+#360=ORIENTED_EDGE('',*,*,#359,.T.);
+#361=CARTESIAN_POINT('',(5.999999999999995,-31.0,8.0));
+#362=VERTEX_POINT('',#361);
+#363=CARTESIAN_POINT('',(5.999999999999995,-31.0,6.000000000000001));
+#364=DIRECTION('',(0.0,-1.0,0.0));
+#365=DIRECTION('',(0.707106781186548,0.0,0.707106781186547));
+#366=AXIS2_PLACEMENT_3D('',#363,#364,#365);
+#367=CIRCLE('',#366,2.0);
+#368=EDGE_CURVE('',#362,#353,#367,.F.);
+#369=ORIENTED_EDGE('',*,*,#368,.F.);
+#370=CARTESIAN_POINT('',(9.999999999999995,-31.0,8.0));
+#371=DIRECTION('',(-1.0,0.0,0.0));
+#372=VECTOR('',#371,4.0);
+#373=LINE('',#370,#372);
+#374=EDGE_CURVE('',#321,#362,#373,.T.);
+#375=ORIENTED_EDGE('',*,*,#374,.F.);
+#376=EDGE_LOOP('',(#351,#360,#369,#375));
+#377=FACE_OUTER_BOUND('',#376,.T.);
+#378=ADVANCED_FACE('',(#377),#350,.F.);
+#379=CARTESIAN_POINT('',(10.0,-8.0,0.0));
+#380=DIRECTION('',(0.0,0.0,1.0));
+#381=DIRECTION('',(0.707106781186548,0.707106781186547,0.0));
+#382=AXIS2_PLACEMENT_3D('',#379,#380,#381);
+#383=CYLINDRICAL_SURFACE('',#382,2.0);
+#384=CARTESIAN_POINT('',(11.999999999999996,-8.0,4.0));
+#385=VERTEX_POINT('',#384);
+#386=CARTESIAN_POINT('',(9.999999999999996,-6.000000000000001,4.0));
+#387=VERTEX_POINT('',#386);
+#388=CARTESIAN_POINT('',(10.0,-8.0,4.0));
+#389=DIRECTION('',(0.0,0.0,1.0));
+#390=DIRECTION('',(0.707106781186548,0.707106781186547,0.0));
+#391=AXIS2_PLACEMENT_3D('',#388,#389,#390);
+#392=CIRCLE('',#391,2.0);
+#393=EDGE_CURVE('',#385,#387,#392,.T.);
+#394=ORIENTED_EDGE('',*,*,#393,.F.);
+#395=CARTESIAN_POINT('',(12.0,-8.0,8.0));
+#396=VERTEX_POINT('',#395);
+#397=CARTESIAN_POINT('',(12.0,-8.0,4.0));
+#398=DIRECTION('',(0.0,0.0,1.0));
+#399=VECTOR('',#398,4.0);
+#400=LINE('',#397,#399);
+#401=EDGE_CURVE('',#385,#396,#400,.T.);
+#402=ORIENTED_EDGE('',*,*,#401,.T.);
+#403=CARTESIAN_POINT('',(10.0,-6.000000000000001,8.0));
+#404=VERTEX_POINT('',#403);
+#405=CARTESIAN_POINT('',(10.0,-8.0,8.0));
+#406=DIRECTION('',(0.0,0.0,1.0));
+#407=DIRECTION('',(0.707106781186548,0.707106781186547,0.0));
+#408=AXIS2_PLACEMENT_3D('',#405,#406,#407);
+#409=CIRCLE('',#408,2.0);
+#410=EDGE_CURVE('',#396,#404,#409,.T.);
+#411=ORIENTED_EDGE('',*,*,#410,.T.);
+#412=CARTESIAN_POINT('',(10.0,-6.000000000000001,8.0));
+#413=DIRECTION('',(0.0,0.0,-1.0));
+#414=VECTOR('',#413,4.0);
+#415=LINE('',#412,#414);
+#416=EDGE_CURVE('',#404,#387,#415,.T.);
+#417=ORIENTED_EDGE('',*,*,#416,.T.);
+#418=EDGE_LOOP('',(#394,#402,#411,#417));
+#419=FACE_OUTER_BOUND('',#418,.T.);
+#420=ADVANCED_FACE('',(#419),#383,.F.);
+#421=CARTESIAN_POINT('',(9.999999999999996,-18.500000000000007,4.0));
+#422=DIRECTION('',(0.0,0.0,1.0));
+#423=DIRECTION('',(1.0,0.0,0.0));
+#424=AXIS2_PLACEMENT_3D('',#421,#422,#423);
+#425=PLANE('',#424);
+#426=ORIENTED_EDGE('',*,*,#318,.T.);
+#427=CARTESIAN_POINT('',(11.999999999999996,-8.0,4.0));
+#428=DIRECTION('',(0.0,-1.0,0.0));
+#429=VECTOR('',#428,21.0);
+#430=LINE('',#427,#429);
+#431=EDGE_CURVE('',#385,#312,#430,.T.);
+#432=ORIENTED_EDGE('',*,*,#431,.F.);
+#433=ORIENTED_EDGE('',*,*,#393,.T.);
+#434=CARTESIAN_POINT('',(9.999999999999996,-31.000000000000004,4.0));
+#435=DIRECTION('',(0.0,1.0,0.0));
+#436=VECTOR('',#435,25.0);
+#437=LINE('',#434,#436);
+#438=EDGE_CURVE('',#310,#387,#437,.T.);
+#439=ORIENTED_EDGE('',*,*,#438,.F.);
+#440=EDGE_LOOP('',(#426,#432,#433,#439));
+#441=FACE_OUTER_BOUND('',#440,.T.);
+#442=ADVANCED_FACE('',(#441),#425,.T.);
+#443=CARTESIAN_POINT('',(7.999999999999995,-6.000000000000001,0.0));
+#444=DIRECTION('',(0.0,1.0,0.0));
+#445=DIRECTION('',(0.0,0.0,1.0));
+#446=AXIS2_PLACEMENT_3D('',#443,#444,#445);
+#447=PLANE('',#446);
+#448=ORIENTED_EDGE('',*,*,#416,.F.);
+#449=CARTESIAN_POINT('',(5.999999999999995,-6.000000000000001,8.0));
+#450=VERTEX_POINT('',#449);
+#451=CARTESIAN_POINT('',(10.0,-6.000000000000001,8.0));
+#452=DIRECTION('',(-1.0,0.0,0.0));
+#453=VECTOR('',#452,4.000000000000006);
+#454=LINE('',#451,#453);
+#455=EDGE_CURVE('',#404,#450,#454,.T.);
+#456=ORIENTED_EDGE('',*,*,#455,.T.);
+#457=CARTESIAN_POINT('',(7.999999999999995,-6.000000000000001,6.000000000000001));
+#458=VERTEX_POINT('',#457);
+#459=CARTESIAN_POINT('',(5.999999999999995,-6.000000000000001,6.000000000000001));
+#460=DIRECTION('',(0.0,1.0,0.0));
+#461=DIRECTION('',(0.707106781186548,0.0,0.707106781186547));
+#462=AXIS2_PLACEMENT_3D('',#459,#460,#461);
+#463=CIRCLE('',#462,2.0);
+#464=EDGE_CURVE('',#458,#450,#463,.F.);
+#465=ORIENTED_EDGE('',*,*,#464,.F.);
+#466=CARTESIAN_POINT('',(9.999999999999996,-6.000000000000001,6.000000000000001));
+#467=DIRECTION('',(0.0,-1.0,0.0));
+#468=DIRECTION('',(-0.707106781186548,0.0,-0.707106781186548));
+#469=AXIS2_PLACEMENT_3D('',#466,#467,#468);
+#470=CIRCLE('',#469,2.0);
+#471=EDGE_CURVE('',#458,#387,#470,.T.);
+#472=ORIENTED_EDGE('',*,*,#471,.T.);
+#473=EDGE_LOOP('',(#448,#456,#465,#472));
+#474=FACE_OUTER_BOUND('',#473,.T.);
+#475=ADVANCED_FACE('',(#474),#447,.F.);
+#476=CARTESIAN_POINT('',(5.999999999999995,-15.430381913358779,6.000000000000001));
+#477=DIRECTION('',(0.0,1.0,0.0));
+#478=DIRECTION('',(0.707106781186548,0.0,0.707106781186547));
+#479=AXIS2_PLACEMENT_3D('',#476,#477,#478);
+#480=CYLINDRICAL_SURFACE('',#479,2.0);
+#481=ORIENTED_EDGE('',*,*,#368,.T.);
+#482=CARTESIAN_POINT('',(7.999999999999995,-6.000000000000004,6.000000000000001));
+#483=DIRECTION('',(0.0,-1.0,0.0));
+#484=VECTOR('',#483,25.0);
+#485=LINE('',#482,#484);
+#486=EDGE_CURVE('',#458,#353,#485,.T.);
+#487=ORIENTED_EDGE('',*,*,#486,.F.);
+#488=ORIENTED_EDGE('',*,*,#464,.T.);
+#489=CARTESIAN_POINT('',(5.999999999999995,-6.0,8.0));
+#490=DIRECTION('',(0.0,-1.0,0.0));
+#491=VECTOR('',#490,25.0);
+#492=LINE('',#489,#491);
+#493=EDGE_CURVE('',#450,#362,#492,.T.);
+#494=ORIENTED_EDGE('',*,*,#493,.T.);
+#495=EDGE_LOOP('',(#481,#487,#488,#494));
+#496=FACE_OUTER_BOUND('',#495,.T.);
+#497=ADVANCED_FACE('',(#496),#480,.T.);
+#498=CARTESIAN_POINT('',(9.999999999999996,-24.750000000000007,6.000000000000001));
+#499=DIRECTION('',(0.0,1.0,0.0));
+#500=DIRECTION('',(-0.707106781186548,0.0,-0.707106781186548));
+#501=AXIS2_PLACEMENT_3D('',#498,#499,#500);
+#502=CYLINDRICAL_SURFACE('',#501,2.0);
+#503=ORIENTED_EDGE('',*,*,#471,.F.);
+#504=ORIENTED_EDGE('',*,*,#486,.T.);
+#505=ORIENTED_EDGE('',*,*,#359,.F.);
+#506=ORIENTED_EDGE('',*,*,#438,.T.);
+#507=EDGE_LOOP('',(#503,#504,#505,#506));
+#508=FACE_OUTER_BOUND('',#507,.T.);
+#509=ADVANCED_FACE('',(#508),#502,.F.);
+#510=CARTESIAN_POINT('',(13.999999999999996,-1.680736333215544,0.0));
+#511=DIRECTION('',(0.0,0.0,1.0));
+#512=DIRECTION('',(0.793353340291235,0.60876142900872,0.0));
+#513=AXIS2_PLACEMENT_3D('',#510,#511,#512);
+#514=CYLINDRICAL_SURFACE('',#513,1.0);
+#515=CARTESIAN_POINT('',(14.258819045102518,-0.714810506926474,8.0));
+#516=VERTEX_POINT('',#515);
+#517=CARTESIAN_POINT('',(14.999999999999998,-1.680736333215545,8.0));
+#518=VERTEX_POINT('',#517);
+#519=CARTESIAN_POINT('',(13.999999999999996,-1.680736333215544,8.0));
+#520=DIRECTION('',(0.0,0.0,-1.0));
+#521=DIRECTION('',(0.793353340291235,0.60876142900872,0.0));
+#522=AXIS2_PLACEMENT_3D('',#519,#520,#521);
+#523=CIRCLE('',#522,1.0);
+#524=EDGE_CURVE('',#516,#518,#523,.T.);
+#525=ORIENTED_EDGE('',*,*,#524,.T.);
+#526=CARTESIAN_POINT('',(14.999999999999998,-1.680736333215543,8.0));
+#527=DIRECTION('',(0.0,0.0,-1.0));
+#528=VECTOR('',#527,8.0);
+#529=LINE('',#526,#528);
+#530=EDGE_CURVE('',#518,#278,#529,.T.);
+#531=ORIENTED_EDGE('',*,*,#530,.T.);
+#532=ORIENTED_EDGE('',*,*,#284,.T.);
+#533=CARTESIAN_POINT('',(14.258819045102518,-0.714810506926475,0.0));
+#534=DIRECTION('',(0.0,0.0,1.0));
+#535=VECTOR('',#534,8.0);
+#536=LINE('',#533,#535);
+#537=EDGE_CURVE('',#270,#516,#536,.T.);
+#538=ORIENTED_EDGE('',*,*,#537,.T.);
+#539=EDGE_LOOP('',(#525,#531,#532,#538));
+#540=FACE_OUTER_BOUND('',#539,.T.);
+#541=ADVANCED_FACE('',(#540),#514,.T.);
+#542=CARTESIAN_POINT('',(14.999999999999998,-0.913409345236582,0.0));
+#543=DIRECTION('',(1.0,0.0,0.0));
+#544=DIRECTION('',(0.0,0.0,-1.0));
+#545=AXIS2_PLACEMENT_3D('',#542,#543,#544);
+#546=PLANE('',#545);
+#547=ORIENTED_EDGE('',*,*,#530,.F.);
+#548=CARTESIAN_POINT('',(15.000000000000004,-37.0,8.0));
+#549=VERTEX_POINT('',#548);
+#550=CARTESIAN_POINT('',(14.999999999999996,-1.680736333215542,8.0));
+#551=DIRECTION('',(0.0,-1.0,0.0));
+#552=VECTOR('',#551,35.319263666784458);
+#553=LINE('',#550,#552);
+#554=EDGE_CURVE('',#518,#549,#553,.T.);
+#555=ORIENTED_EDGE('',*,*,#554,.T.);
+#556=CARTESIAN_POINT('',(15.000000000000004,-37.0,0.0));
+#557=DIRECTION('',(0.0,0.0,1.0));
+#558=VECTOR('',#557,8.0);
+#559=LINE('',#556,#558);
+#560=EDGE_CURVE('',#287,#549,#559,.T.);
+#561=ORIENTED_EDGE('',*,*,#560,.F.);
+#562=ORIENTED_EDGE('',*,*,#292,.T.);
+#563=EDGE_LOOP('',(#547,#555,#561,#562));
+#564=FACE_OUTER_BOUND('',#563,.T.);
+#565=ADVANCED_FACE('',(#564),#546,.T.);
+#566=CARTESIAN_POINT('',(-0.106839673462534,0.139236173282444,8.0));
+#567=DIRECTION('',(0.0,0.0,1.0));
+#568=DIRECTION('',(1.0,0.0,0.0));
+#569=AXIS2_PLACEMENT_3D('',#566,#567,#568);
+#570=PLANE('',#569);
+#571=ORIENTED_EDGE('',*,*,#136,.T.);
+#572=CARTESIAN_POINT('',(-0.999999999999997,-31.0,8.0));
+#573=VERTEX_POINT('',#572);
+#574=CARTESIAN_POINT('',(-0.999999999999997,-29.0,8.0));
+#575=DIRECTION('',(0.0,0.0,-1.0));
+#576=DIRECTION('',(-0.707106781186547,-0.707106781186548,0.0));
+#577=AXIS2_PLACEMENT_3D('',#574,#575,#576);
+#578=CIRCLE('',#577,2.0);
+#579=EDGE_CURVE('',#573,#123,#578,.T.);
+#580=ORIENTED_EDGE('',*,*,#579,.F.);
+#581=CARTESIAN_POINT('',(1.400000000000013,-31.0,8.0));
+#582=VERTEX_POINT('',#581);
+#583=CARTESIAN_POINT('',(-0.999999999999997,-31.0,8.0));
+#584=DIRECTION('',(1.0,0.0,0.0));
+#585=VECTOR('',#584,2.400000000000009);
+#586=LINE('',#583,#585);
+#587=EDGE_CURVE('',#573,#582,#586,.T.);
+#588=ORIENTED_EDGE('',*,*,#587,.T.);
+#589=CARTESIAN_POINT('',(3.400000000000012,-33.0,8.0));
+#590=VERTEX_POINT('',#589);
+#591=CARTESIAN_POINT('',(1.400000000000013,-33.0,8.0));
+#592=DIRECTION('',(0.0,0.0,1.0));
+#593=DIRECTION('',(0.707106781186547,0.707106781186548,0.0));
+#594=AXIS2_PLACEMENT_3D('',#591,#592,#593);
+#595=CIRCLE('',#594,2.0);
+#596=EDGE_CURVE('',#590,#582,#595,.T.);
+#597=ORIENTED_EDGE('',*,*,#596,.F.);
+#598=CARTESIAN_POINT('',(3.400000000000014,-35.0,8.0));
+#599=VERTEX_POINT('',#598);
+#600=CARTESIAN_POINT('',(3.400000000000013,-33.0,8.0));
+#601=DIRECTION('',(0.0,-1.0,0.0));
+#602=VECTOR('',#601,2.0);
+#603=LINE('',#600,#602);
+#604=EDGE_CURVE('',#590,#599,#603,.T.);
+#605=ORIENTED_EDGE('',*,*,#604,.T.);
+#606=CARTESIAN_POINT('',(5.400000000000014,-37.0,8.0));
+#607=VERTEX_POINT('',#606);
+#608=CARTESIAN_POINT('',(5.400000000000014,-35.0,8.0));
+#609=DIRECTION('',(0.0,0.0,-1.0));
+#610=DIRECTION('',(-0.707106781186547,-0.707106781186548,0.0));
+#611=AXIS2_PLACEMENT_3D('',#608,#609,#610);
+#612=CIRCLE('',#611,2.0);
+#613=EDGE_CURVE('',#607,#599,#612,.T.);
+#614=ORIENTED_EDGE('',*,*,#613,.F.);
+#615=CARTESIAN_POINT('',(15.000000000000004,-37.0,8.0));
+#616=DIRECTION('',(-1.0,0.0,0.0));
+#617=VECTOR('',#616,9.599999999999991);
+#618=LINE('',#615,#617);
+#619=EDGE_CURVE('',#549,#607,#618,.T.);
+#620=ORIENTED_EDGE('',*,*,#619,.F.);
+#621=ORIENTED_EDGE('',*,*,#554,.F.);
+#622=ORIENTED_EDGE('',*,*,#524,.F.);
+#623=CARTESIAN_POINT('',(0.776457135307561,2.897777478867205,8.0));
+#624=VERTEX_POINT('',#623);
+#625=CARTESIAN_POINT('',(0.776457135307563,2.897777478867205,8.0));
+#626=DIRECTION('',(0.965925826289068,-0.25881904510252,0.0));
+#627=VECTOR('',#626,13.957968140878911);
+#628=LINE('',#625,#627);
+#629=EDGE_CURVE('',#624,#516,#628,.T.);
+#630=ORIENTED_EDGE('',*,*,#629,.F.);
+#631=CARTESIAN_POINT('',(0.0,0.0,8.0));
+#632=DIRECTION('',(0.0,0.0,-1.0));
+#633=DIRECTION('',(1.0,0.0,0.0));
+#634=AXIS2_PLACEMENT_3D('',#631,#632,#633);
+#635=CIRCLE('',#634,3.0);
+#636=EDGE_CURVE('',#131,#624,#635,.T.);
+#637=ORIENTED_EDGE('',*,*,#636,.F.);
+#638=EDGE_LOOP('',(#571,#580,#588,#597,#605,#614,#620,#621,#622,#630,#637));
+#639=FACE_OUTER_BOUND('',#638,.T.);
+#640=CARTESIAN_POINT('',(11.999999999999998,-8.0,8.0));
+#641=DIRECTION('',(0.0,-1.0,0.0));
+#642=VECTOR('',#641,21.0);
+#643=LINE('',#640,#642);
+#644=EDGE_CURVE('',#396,#329,#643,.T.);
+#645=ORIENTED_EDGE('',*,*,#644,.T.);
+#646=ORIENTED_EDGE('',*,*,#335,.F.);
+#647=ORIENTED_EDGE('',*,*,#374,.T.);
+#648=ORIENTED_EDGE('',*,*,#493,.F.);
+#649=ORIENTED_EDGE('',*,*,#455,.F.);
+#650=ORIENTED_EDGE('',*,*,#410,.F.);
+#651=EDGE_LOOP('',(#645,#646,#647,#648,#649,#650));
+#652=FACE_BOUND('',#651,.T.);
+#653=ADVANCED_FACE('',(#639,#652),#570,.T.);
+#654=CARTESIAN_POINT('',(5.400000000000014,-35.0,0.0));
+#655=DIRECTION('',(0.0,0.0,-1.0));
+#656=DIRECTION('',(-0.707106781186547,-0.707106781186548,0.0));
+#657=AXIS2_PLACEMENT_3D('',#654,#655,#656);
+#658=CYLINDRICAL_SURFACE('',#657,2.0);
+#659=ORIENTED_EDGE('',*,*,#613,.T.);
+#660=CARTESIAN_POINT('',(3.400000000000014,-35.0,8.0));
+#661=DIRECTION('',(0.0,0.0,-1.0));
+#662=VECTOR('',#661,4.0);
+#663=LINE('',#660,#662);
+#664=EDGE_CURVE('',#599,#186,#663,.T.);
+#665=ORIENTED_EDGE('',*,*,#664,.T.);
+#666=ORIENTED_EDGE('',*,*,#192,.T.);
+#667=CARTESIAN_POINT('',(5.400000000000014,-37.0,4.0));
+#668=DIRECTION('',(0.0,0.0,1.0));
+#669=VECTOR('',#668,4.0);
+#670=LINE('',#667,#669);
+#671=EDGE_CURVE('',#178,#607,#670,.T.);
+#672=ORIENTED_EDGE('',*,*,#671,.T.);
+#673=EDGE_LOOP('',(#659,#665,#666,#672));
+#674=FACE_OUTER_BOUND('',#673,.T.);
+#675=ADVANCED_FACE('',(#674),#658,.T.);
+#676=CARTESIAN_POINT('',(15.000000000000004,-37.0,0.0));
+#677=DIRECTION('',(0.0,-1.0,0.0));
+#678=DIRECTION('',(0.0,0.0,-1.0));
+#679=AXIS2_PLACEMENT_3D('',#676,#677,#678);
+#680=PLANE('',#679);
+#681=ORIENTED_EDGE('',*,*,#671,.F.);
+#682=ORIENTED_EDGE('',*,*,#183,.T.);
+#683=ORIENTED_EDGE('',*,*,#248,.F.);
+#684=ORIENTED_EDGE('',*,*,#298,.T.);
+#685=ORIENTED_EDGE('',*,*,#560,.T.);
+#686=ORIENTED_EDGE('',*,*,#619,.T.);
+#687=EDGE_LOOP('',(#681,#682,#683,#684,#685,#686));
+#688=FACE_OUTER_BOUND('',#687,.T.);
+#689=ADVANCED_FACE('',(#688),#680,.T.);
+#690=CARTESIAN_POINT('',(1.400000000000013,-33.0,0.0));
+#691=DIRECTION('',(0.0,0.0,1.0));
+#692=DIRECTION('',(0.707106781186547,0.707106781186548,0.0));
+#693=AXIS2_PLACEMENT_3D('',#690,#691,#692);
+#694=CYLINDRICAL_SURFACE('',#693,2.0);
+#695=ORIENTED_EDGE('',*,*,#209,.F.);
+#696=CARTESIAN_POINT('',(3.400000000000013,-33.0,4.0));
+#697=DIRECTION('',(0.0,0.0,1.0));
+#698=VECTOR('',#697,4.0);
+#699=LINE('',#696,#698);
+#700=EDGE_CURVE('',#195,#590,#699,.T.);
+#701=ORIENTED_EDGE('',*,*,#700,.T.);
+#702=ORIENTED_EDGE('',*,*,#596,.T.);
+#703=CARTESIAN_POINT('',(1.400000000000013,-31.0,8.0));
+#704=DIRECTION('',(0.0,0.0,-1.0));
+#705=VECTOR('',#704,4.0);
+#706=LINE('',#703,#705);
+#707=EDGE_CURVE('',#582,#203,#706,.T.);
+#708=ORIENTED_EDGE('',*,*,#707,.T.);
+#709=EDGE_LOOP('',(#695,#701,#702,#708));
+#710=FACE_OUTER_BOUND('',#709,.T.);
+#711=ADVANCED_FACE('',(#710),#694,.F.);
+#712=CARTESIAN_POINT('',(-2.999999999999996,-31.0,0.0));
+#713=DIRECTION('',(0.0,1.0,0.0));
+#714=DIRECTION('',(0.0,0.0,1.0));
+#715=AXIS2_PLACEMENT_3D('',#712,#713,#714);
+#716=PLANE('',#715);
+#717=ORIENTED_EDGE('',*,*,#707,.F.);
+#718=ORIENTED_EDGE('',*,*,#587,.F.);
+#719=CARTESIAN_POINT('',(-0.999999999999997,-31.0,4.0));
+#720=DIRECTION('',(0.0,0.0,1.0));
+#721=VECTOR('',#720,4.0);
+#722=LINE('',#719,#721);
+#723=EDGE_CURVE('',#212,#573,#722,.T.);
+#724=ORIENTED_EDGE('',*,*,#723,.F.);
+#725=ORIENTED_EDGE('',*,*,#217,.T.);
+#726=EDGE_LOOP('',(#717,#718,#724,#725));
+#727=FACE_OUTER_BOUND('',#726,.T.);
+#728=ADVANCED_FACE('',(#727),#716,.F.);
+#729=CARTESIAN_POINT('',(-0.999999999999997,-29.0,0.0));
+#730=DIRECTION('',(0.0,0.0,1.0));
+#731=DIRECTION('',(-0.707106781186547,-0.707106781186548,0.0));
+#732=AXIS2_PLACEMENT_3D('',#729,#730,#731);
+#733=CYLINDRICAL_SURFACE('',#732,2.0);
+#734=ORIENTED_EDGE('',*,*,#128,.T.);
+#735=ORIENTED_EDGE('',*,*,#224,.T.);
+#736=ORIENTED_EDGE('',*,*,#723,.T.);
+#737=ORIENTED_EDGE('',*,*,#579,.T.);
+#738=EDGE_LOOP('',(#734,#735,#736,#737));
+#739=FACE_OUTER_BOUND('',#738,.T.);
+#740=ADVANCED_FACE('',(#739),#733,.T.);
+#741=CARTESIAN_POINT('',(3.400000000000012,-31.0,0.0));
+#742=DIRECTION('',(1.0,0.0,0.0));
+#743=DIRECTION('',(0.0,0.0,-1.0));
+#744=AXIS2_PLACEMENT_3D('',#741,#742,#743);
+#745=PLANE('',#744);
+#746=ORIENTED_EDGE('',*,*,#664,.F.);
+#747=ORIENTED_EDGE('',*,*,#604,.F.);
+#748=ORIENTED_EDGE('',*,*,#700,.F.);
+#749=ORIENTED_EDGE('',*,*,#200,.T.);
+#750=EDGE_LOOP('',(#746,#747,#748,#749));
+#751=FACE_OUTER_BOUND('',#750,.T.);
+#752=ADVANCED_FACE('',(#751),#745,.F.);
+#753=CARTESIAN_POINT('',(0.0,0.0,-84.5));
+#754=DIRECTION('',(0.0,0.0,1.0));
+#755=DIRECTION('',(1.0,0.0,0.0));
+#756=AXIS2_PLACEMENT_3D('',#753,#754,#755);
+#757=CONICAL_SURFACE('',#756,2.5,45.000000000000099);
+#758=ORIENTED_EDGE('',*,*,#157,.T.);
+#759=CARTESIAN_POINT('',(0.0,0.0,-84.0));
+#760=DIRECTION('',(0.0,0.0,-1.0));
+#761=DIRECTION('',(1.0,0.0,0.0));
+#762=AXIS2_PLACEMENT_3D('',#759,#760,#761);
+#763=CIRCLE('',#762,3.0);
+#764=EDGE_CURVE('',#139,#74,#763,.T.);
+#765=ORIENTED_EDGE('',*,*,#764,.T.);
+#766=ORIENTED_EDGE('',*,*,#88,.T.);
+#767=CARTESIAN_POINT('',(0.0,0.0,-85.0));
+#768=DIRECTION('',(0.0,0.0,1.0));
+#769=DIRECTION('',(1.0,0.0,0.0));
+#770=AXIS2_PLACEMENT_3D('',#767,#768,#769);
+#771=CIRCLE('',#770,2.0);
+#772=EDGE_CURVE('',#76,#76,#771,.T.);
+#773=ORIENTED_EDGE('',*,*,#772,.T.);
+#774=EDGE_LOOP('',(#758,#765,#766,#773));
+#775=FACE_OUTER_BOUND('',#774,.T.);
+#776=ADVANCED_FACE('',(#775),#757,.T.);
+#777=CARTESIAN_POINT('',(-0.106839673462534,0.139236173282444,-85.0));
+#778=DIRECTION('',(0.0,0.0,1.0));
+#779=DIRECTION('',(1.0,0.0,0.0));
+#780=AXIS2_PLACEMENT_3D('',#777,#778,#779);
+#781=PLANE('',#780);
+#782=ORIENTED_EDGE('',*,*,#772,.F.);
+#783=EDGE_LOOP('',(#782));
+#784=FACE_OUTER_BOUND('',#783,.T.);
+#785=ADVANCED_FACE('',(#784),#781,.F.);
+#786=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#787=DIRECTION('',(0.0,0.0,1.0));
+#788=DIRECTION('',(1.0,0.0,0.0));
+#789=AXIS2_PLACEMENT_3D('',#786,#787,#788);
+#790=CYLINDRICAL_SURFACE('',#789,3.0);
+#791=ORIENTED_EDGE('',*,*,#144,.T.);
+#792=ORIENTED_EDGE('',*,*,#636,.T.);
+#793=CARTESIAN_POINT('',(0.776457135307561,2.897777478867205,0.0));
+#794=DIRECTION('',(0.0,0.0,1.0));
+#795=VECTOR('',#794,8.0);
+#796=LINE('',#793,#795);
+#797=EDGE_CURVE('',#261,#624,#796,.T.);
+#798=ORIENTED_EDGE('',*,*,#797,.F.);
+#799=ORIENTED_EDGE('',*,*,#267,.F.);
+#800=ORIENTED_EDGE('',*,*,#96,.T.);
+#801=ORIENTED_EDGE('',*,*,#764,.F.);
+#802=EDGE_LOOP('',(#791,#792,#798,#799,#800,#801));
+#803=FACE_OUTER_BOUND('',#802,.T.);
+#804=ADVANCED_FACE('',(#803),#790,.T.);
+#805=CARTESIAN_POINT('',(12.0,-6.000000000000001,0.0));
+#806=DIRECTION('',(1.0,0.0,0.0));
+#807=DIRECTION('',(0.0,0.0,-1.0));
+#808=AXIS2_PLACEMENT_3D('',#805,#806,#807);
+#809=PLANE('',#808);
+#810=ORIENTED_EDGE('',*,*,#341,.F.);
+#811=ORIENTED_EDGE('',*,*,#644,.F.);
+#812=ORIENTED_EDGE('',*,*,#401,.F.);
+#813=ORIENTED_EDGE('',*,*,#431,.T.);
+#814=EDGE_LOOP('',(#810,#811,#812,#813));
+#815=FACE_OUTER_BOUND('',#814,.T.);
+#816=ADVANCED_FACE('',(#815),#809,.F.);
+#817=CARTESIAN_POINT('',(0.776457135307561,2.897777478867205,0.0));
+#818=DIRECTION('',(0.25881904510252,0.965925826289068,0.0));
+#819=DIRECTION('',(0.0,0.0,1.0));
+#820=AXIS2_PLACEMENT_3D('',#817,#818,#819);
+#821=PLANE('',#820);
+#822=ORIENTED_EDGE('',*,*,#537,.F.);
+#823=ORIENTED_EDGE('',*,*,#275,.T.);
+#824=ORIENTED_EDGE('',*,*,#797,.T.);
+#825=ORIENTED_EDGE('',*,*,#629,.T.);
+#826=EDGE_LOOP('',(#822,#823,#824,#825));
+#827=FACE_OUTER_BOUND('',#826,.T.);
+#828=ADVANCED_FACE('',(#827),#821,.T.);
+#829=CLOSED_SHELL('',(#161,#228,#253,#303,#345,#378,#420,#442,#475,#497,#509,#541,#565,#653,#675,#689,#711,#728,#740,#752,#776,#785,#804,#816,#828));
+#830=MANIFOLD_SOLID_BREP('Solid1',#829);
+#831=COLOUR_RGB('PTFE',0.917647004127502,0.921568989753723,0.933332979679108);
+#832=FILL_AREA_STYLE_COLOUR('PTFE',#831);
+#833=FILL_AREA_STYLE('PTFE',(#832));
+#834=SURFACE_STYLE_FILL_AREA(#833);
+#835=SURFACE_SIDE_STYLE('PTFE',(#834));
+#836=SURFACE_STYLE_USAGE(.BOTH.,#835);
+#837=PRESENTATION_STYLE_ASSIGNMENT((#836));
+#838=STYLED_ITEM('',(#837),#830);
+#839=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#838),#36);
+#840=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#830),#36);
+#841=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#840,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/STEP/PM522FiringPin2.stp

@@ -0,0 +1,310 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM522\\STEP2.0\\PM522FiringPin2.stp','2015-10-01T18:16:35',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM522FiringPin2','PM522FiringPin2',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(0.0,-0.5,24.000000000000004));
+#69=DIRECTION('',(0.0,0.911921505175107,-0.410364677328798));
+#70=DIRECTION('',(0.0,0.410364677328798,0.911921505175107));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=PLANE('',#71);
+#73=CARTESIAN_POINT('',(1.243221621433604,-0.5,24.000000000000004));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(-1.243221621433604,-0.5,24.000000000000004));
+#76=VERTEX_POINT('',#75);
+#77=CARTESIAN_POINT('',(0.0,0.0,25.111111111111114));
+#78=DIRECTION('',(0.0,0.911921505175107,-0.410364677328798));
+#79=DIRECTION('',(0.0,-0.410364677328798,-0.911921505175107));
+#80=AXIS2_PLACEMENT_3D('',#77,#78,#79);
+#81=ELLIPSE('',#80,3.265388260808686,1.34);
+#82=EDGE_CURVE('',#74,#76,#81,.T.);
+#83=ORIENTED_EDGE('',*,*,#82,.F.);
+#84=CARTESIAN_POINT('',(-1.243221621433604,-0.5,24.000000000000004));
+#85=DIRECTION('',(1.0,0.0,0.0));
+#86=VECTOR('',#85,2.486443242867209);
+#87=LINE('',#84,#86);
+#88=EDGE_CURVE('',#76,#74,#87,.T.);
+#89=ORIENTED_EDGE('',*,*,#88,.F.);
+#90=EDGE_LOOP('',(#83,#89));
+#91=FACE_OUTER_BOUND('',#90,.T.);
+#92=ADVANCED_FACE('',(#91),#72,.F.);
+#93=CARTESIAN_POINT('',(0.0,1.4,22.0));
+#94=DIRECTION('',(0.0,-0.911921505175107,-0.410364677328798));
+#95=DIRECTION('',(0.0,0.410364677328798,-0.911921505175107));
+#96=AXIS2_PLACEMENT_3D('',#93,#94,#95);
+#97=PLANE('',#96);
+#98=CARTESIAN_POINT('',(-1.243221621433604,0.5,24.000000000000004));
+#99=VERTEX_POINT('',#98);
+#100=CARTESIAN_POINT('',(1.243221621433604,0.5,24.000000000000004));
+#101=VERTEX_POINT('',#100);
+#102=CARTESIAN_POINT('',(0.0,0.0,25.111111111111114));
+#103=DIRECTION('',(0.0,-0.911921505175107,-0.410364677328798));
+#104=DIRECTION('',(0.0,-0.410364677328798,0.911921505175107));
+#105=AXIS2_PLACEMENT_3D('',#102,#103,#104);
+#106=ELLIPSE('',#105,3.265388260808686,1.34);
+#107=EDGE_CURVE('',#99,#101,#106,.T.);
+#108=ORIENTED_EDGE('',*,*,#107,.F.);
+#109=CARTESIAN_POINT('',(-1.243221621433604,0.5,24.000000000000004));
+#110=DIRECTION('',(1.0,0.0,0.0));
+#111=VECTOR('',#110,2.486443242867209);
+#112=LINE('',#109,#111);
+#113=EDGE_CURVE('',#99,#101,#112,.T.);
+#114=ORIENTED_EDGE('',*,*,#113,.T.);
+#115=EDGE_LOOP('',(#108,#114));
+#116=FACE_OUTER_BOUND('',#115,.T.);
+#117=ADVANCED_FACE('',(#116),#97,.F.);
+#118=CARTESIAN_POINT('',(0.0,0.0,24.000000000000004));
+#119=DIRECTION('',(0.0,0.0,-1.0));
+#120=DIRECTION('',(-1.0,0.0,0.0));
+#121=AXIS2_PLACEMENT_3D('',#118,#119,#120);
+#122=PLANE('',#121);
+#123=CARTESIAN_POINT('',(0.0,0.0,24.000000000000004));
+#124=DIRECTION('',(0.0,0.0,-1.0));
+#125=DIRECTION('',(-1.0,0.0,0.0));
+#126=AXIS2_PLACEMENT_3D('',#123,#124,#125);
+#127=CIRCLE('',#126,1.34);
+#128=EDGE_CURVE('',#101,#74,#127,.T.);
+#129=ORIENTED_EDGE('',*,*,#128,.F.);
+#130=ORIENTED_EDGE('',*,*,#113,.F.);
+#131=CARTESIAN_POINT('',(0.0,0.0,24.000000000000004));
+#132=DIRECTION('',(0.0,0.0,-1.0));
+#133=DIRECTION('',(-1.0,0.0,0.0));
+#134=AXIS2_PLACEMENT_3D('',#131,#132,#133);
+#135=CIRCLE('',#134,1.34);
+#136=EDGE_CURVE('',#76,#99,#135,.T.);
+#137=ORIENTED_EDGE('',*,*,#136,.F.);
+#138=ORIENTED_EDGE('',*,*,#88,.T.);
+#139=EDGE_LOOP('',(#129,#130,#137,#138));
+#140=FACE_OUTER_BOUND('',#139,.T.);
+#141=ADVANCED_FACE('',(#140),#122,.F.);
+#142=CARTESIAN_POINT('',(6.000000000000001,-2.4,0.0));
+#143=DIRECTION('',(0.0,-1.0,0.0));
+#144=DIRECTION('',(0.0,0.0,-1.0));
+#145=AXIS2_PLACEMENT_3D('',#142,#143,#144);
+#146=PLANE('',#145);
+#147=CARTESIAN_POINT('',(-0.900000000000001,-2.4,-1.0));
+#148=VERTEX_POINT('',#147);
+#149=CARTESIAN_POINT('',(2.641139846732846,-2.4,-1.0));
+#150=VERTEX_POINT('',#149);
+#151=CARTESIAN_POINT('',(-0.900000000000001,-2.4,-1.0));
+#152=DIRECTION('',(1.0,0.0,0.0));
+#153=VECTOR('',#152,3.541139846732847);
+#154=LINE('',#151,#153);
+#155=EDGE_CURVE('',#148,#150,#154,.T.);
+#156=ORIENTED_EDGE('',*,*,#155,.T.);
+#157=CARTESIAN_POINT('',(2.641139846732846,-2.4,0.0));
+#158=VERTEX_POINT('',#157);
+#159=CARTESIAN_POINT('',(2.641139846732846,-2.4,-1.0));
+#160=DIRECTION('',(0.0,0.0,1.0));
+#161=VECTOR('',#160,1.0);
+#162=LINE('',#159,#161);
+#163=EDGE_CURVE('',#150,#158,#162,.T.);
+#164=ORIENTED_EDGE('',*,*,#163,.T.);
+#165=CARTESIAN_POINT('',(-0.900000000000001,-2.4,0.0));
+#166=VERTEX_POINT('',#165);
+#167=CARTESIAN_POINT('',(2.641139846732846,-2.4,0.0));
+#168=DIRECTION('',(-1.0,0.0,0.0));
+#169=VECTOR('',#168,3.541139846732847);
+#170=LINE('',#167,#169);
+#171=EDGE_CURVE('',#158,#166,#170,.T.);
+#172=ORIENTED_EDGE('',*,*,#171,.T.);
+#173=CARTESIAN_POINT('',(-0.900000000000001,-2.4,0.0));
+#174=DIRECTION('',(0.0,0.0,-1.0));
+#175=VECTOR('',#174,1.0);
+#176=LINE('',#173,#175);
+#177=EDGE_CURVE('',#166,#148,#176,.T.);
+#178=ORIENTED_EDGE('',*,*,#177,.T.);
+#179=EDGE_LOOP('',(#156,#164,#172,#178));
+#180=FACE_OUTER_BOUND('',#179,.T.);
+#181=ADVANCED_FACE('',(#180),#146,.T.);
+#182=CARTESIAN_POINT('',(-0.9,-0.4,0.0));
+#183=DIRECTION('',(0.0,0.0,1.0));
+#184=DIRECTION('',(1.0,0.0,0.0));
+#185=AXIS2_PLACEMENT_3D('',#182,#183,#184);
+#186=CYLINDRICAL_SURFACE('',#185,2.0);
+#187=CARTESIAN_POINT('',(-2.9,-0.4,-1.0));
+#188=VERTEX_POINT('',#187);
+#189=CARTESIAN_POINT('',(-0.9,-0.4,-1.0));
+#190=DIRECTION('',(0.0,0.0,1.0));
+#191=DIRECTION('',(1.0,0.0,0.0));
+#192=AXIS2_PLACEMENT_3D('',#189,#190,#191);
+#193=CIRCLE('',#192,2.0);
+#194=EDGE_CURVE('',#188,#148,#193,.T.);
+#195=ORIENTED_EDGE('',*,*,#194,.T.);
+#196=ORIENTED_EDGE('',*,*,#177,.F.);
+#197=CARTESIAN_POINT('',(-2.9,-0.4,0.0));
+#198=VERTEX_POINT('',#197);
+#199=CARTESIAN_POINT('',(-0.9,-0.4,0.0));
+#200=DIRECTION('',(0.0,0.0,-1.0));
+#201=DIRECTION('',(1.0,0.0,0.0));
+#202=AXIS2_PLACEMENT_3D('',#199,#200,#201);
+#203=CIRCLE('',#202,2.0);
+#204=EDGE_CURVE('',#166,#198,#203,.T.);
+#205=ORIENTED_EDGE('',*,*,#204,.T.);
+#206=CARTESIAN_POINT('',(-2.9,-0.4,0.0));
+#207=DIRECTION('',(0.0,0.0,-1.0));
+#208=VECTOR('',#207,1.0);
+#209=LINE('',#206,#208);
+#210=EDGE_CURVE('',#198,#188,#209,.T.);
+#211=ORIENTED_EDGE('',*,*,#210,.T.);
+#212=EDGE_LOOP('',(#195,#196,#205,#211));
+#213=FACE_OUTER_BOUND('',#212,.T.);
+#214=ADVANCED_FACE('',(#213),#186,.T.);
+#215=CARTESIAN_POINT('',(-2.9,-0.4,0.0));
+#216=DIRECTION('',(-1.0,0.0,0.0));
+#217=DIRECTION('',(0.0,0.0,1.0));
+#218=AXIS2_PLACEMENT_3D('',#215,#216,#217);
+#219=PLANE('',#218);
+#220=CARTESIAN_POINT('',(-2.9,2.079812417022267,-1.0));
+#221=VERTEX_POINT('',#220);
+#222=CARTESIAN_POINT('',(-2.9,2.079812417022267,-1.0));
+#223=DIRECTION('',(0.0,-1.0,0.0));
+#224=VECTOR('',#223,2.479812417022267);
+#225=LINE('',#222,#224);
+#226=EDGE_CURVE('',#221,#188,#225,.T.);
+#227=ORIENTED_EDGE('',*,*,#226,.T.);
+#228=ORIENTED_EDGE('',*,*,#210,.F.);
+#229=CARTESIAN_POINT('',(-2.9,2.079812417022267,0.0));
+#230=VERTEX_POINT('',#229);
+#231=CARTESIAN_POINT('',(-2.9,-0.4,0.0));
+#232=DIRECTION('',(0.0,1.0,0.0));
+#233=VECTOR('',#232,2.479812417022267);
+#234=LINE('',#231,#233);
+#235=EDGE_CURVE('',#198,#230,#234,.T.);
+#236=ORIENTED_EDGE('',*,*,#235,.T.);
+#237=CARTESIAN_POINT('',(-2.9,2.079812417022267,0.0));
+#238=DIRECTION('',(0.0,0.0,-1.0));
+#239=VECTOR('',#238,1.0);
+#240=LINE('',#237,#239);
+#241=EDGE_CURVE('',#230,#221,#240,.T.);
+#242=ORIENTED_EDGE('',*,*,#241,.T.);
+#243=EDGE_LOOP('',(#227,#228,#236,#242));
+#244=FACE_OUTER_BOUND('',#243,.T.);
+#245=ADVANCED_FACE('',(#244),#219,.T.);
+#246=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#247=DIRECTION('',(0.0,0.0,-1.0));
+#248=DIRECTION('',(-1.0,0.0,0.0));
+#249=AXIS2_PLACEMENT_3D('',#246,#247,#248);
+#250=PLANE('',#249);
+#251=ORIENTED_EDGE('',*,*,#235,.F.);
+#252=ORIENTED_EDGE('',*,*,#204,.F.);
+#253=ORIENTED_EDGE('',*,*,#171,.F.);
+#254=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#255=DIRECTION('',(0.0,0.0,-1.0));
+#256=DIRECTION('',(-1.0,0.0,0.0));
+#257=AXIS2_PLACEMENT_3D('',#254,#255,#256);
+#258=CIRCLE('',#257,3.5687);
+#259=EDGE_CURVE('',#230,#158,#258,.T.);
+#260=ORIENTED_EDGE('',*,*,#259,.F.);
+#261=EDGE_LOOP('',(#251,#252,#253,#260));
+#262=FACE_OUTER_BOUND('',#261,.T.);
+#263=CARTESIAN_POINT('',(1.34,1.641027E-016,0.0));
+#264=VERTEX_POINT('',#263);
+#265=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#266=DIRECTION('',(0.0,0.0,-1.0));
+#267=DIRECTION('',(-1.0,0.0,0.0));
+#268=AXIS2_PLACEMENT_3D('',#265,#266,#267);
+#269=CIRCLE('',#268,1.34);
+#270=EDGE_CURVE('',#264,#264,#269,.T.);
+#271=ORIENTED_EDGE('',*,*,#270,.T.);
+#272=EDGE_LOOP('',(#271));
+#273=FACE_BOUND('',#272,.T.);
+#274=ADVANCED_FACE('',(#262,#273),#250,.F.);
+#275=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#276=DIRECTION('',(0.0,0.0,-1.0));
+#277=DIRECTION('',(-1.0,0.0,0.0));
+#278=AXIS2_PLACEMENT_3D('',#275,#276,#277);
+#279=CYLINDRICAL_SURFACE('',#278,3.5687);
+#280=ORIENTED_EDGE('',*,*,#241,.F.);
+#281=ORIENTED_EDGE('',*,*,#259,.T.);
+#282=ORIENTED_EDGE('',*,*,#163,.F.);
+#283=CARTESIAN_POINT('',(0.0,0.0,-1.0));
+#284=DIRECTION('',(0.0,0.0,1.0));
+#285=DIRECTION('',(-1.0,0.0,0.0));
+#286=AXIS2_PLACEMENT_3D('',#283,#284,#285);
+#287=CIRCLE('',#286,3.5687);
+#288=EDGE_CURVE('',#150,#221,#287,.T.);
+#289=ORIENTED_EDGE('',*,*,#288,.T.);
+#290=EDGE_LOOP('',(#280,#281,#282,#289));
+#291=FACE_OUTER_BOUND('',#290,.T.);
+#292=ADVANCED_FACE('',(#291),#279,.T.);
+#293=CARTESIAN_POINT('',(0.0,0.0,-1.0));
+#294=DIRECTION('',(0.0,0.0,-1.0));
+#295=DIRECTION('',(-1.0,0.0,0.0));
+#296=AXIS2_PLACEMENT_3D('',#293,#294,#295);
+#297=PLANE('',#296);
+#298=ORIENTED_EDGE('',*,*,#226,.F.);
+#299=ORIENTED_EDGE('',*,*,#288,.F.);
+#300=ORIENTED_EDGE('',*,*,#155,.F.);
+#301=ORIENTED_EDGE('',*,*,#194,.F.);
+#302=EDGE_LOOP('',(#298,#299,#300,#301));
+#303=FACE_OUTER_BOUND('',#302,.T.);
+#304=ADVANCED_FACE('',(#303),#297,.T.);
+#305=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#306=DIRECTION('',(0.0,0.0,1.0));
+#307=DIRECTION('',(-1.0,0.0,0.0));
+#308=AXIS2_PLACEMENT_3D('',#305,#306,#307);
+#309=CYLINDRICAL_SURFACE('',#308,1.34);
+#310=ORIENTED_EDGE('',*,*,#107,.T.);
+#311=ORIENTED_EDGE('',*,*,#128,.T.);
+#312=ORIENTED_EDGE('',*,*,#82,.T.);
+#313=ORIENTED_EDGE('',*,*,#136,.T.);
+#314=EDGE_LOOP('',(#310,#311,#312,#313));
+#315=FACE_OUTER_BOUND('',#314,.T.);
+#316=ORIENTED_EDGE('',*,*,#270,.F.);
+#317=EDGE_LOOP('',(#316));
+#318=FACE_BOUND('',#317,.T.);
+#319=ADVANCED_FACE('',(#315,#318),#309,.T.);
+#320=CLOSED_SHELL('',(#92,#117,#141,#181,#214,#245,#274,#292,#304,#319));
+#321=MANIFOLD_SOLID_BREP('Solid1',#320);
+#322=COLOUR_RGB('Black Chrome',0.752941012382507,0.752941012382507,0.752941012382507);
+#323=FILL_AREA_STYLE_COLOUR('Black Chrome',#322);
+#324=FILL_AREA_STYLE('Black Chrome',(#323));
+#325=SURFACE_STYLE_FILL_AREA(#324);
+#326=SURFACE_SIDE_STYLE('Black Chrome',(#325));
+#327=SURFACE_STYLE_USAGE(.BOTH.,#326);
+#328=PRESENTATION_STYLE_ASSIGNMENT((#327));
+#329=STYLED_ITEM('',(#328),#321);
+#330=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#329),#36);
+#331=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#321),#36);
+#332=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#331,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/STEP/PM522FiringPinRetainer2.stp

@@ -0,0 +1,448 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM522\\STEP2.0\\PM522FiringPinRetainer2.stp','2015-10-01T18:16:24',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM522FiringPinRetainer2','PM522FiringPinRetainer2',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(-1.110223E-015,5.9,0.0));
+#69=DIRECTION('',(0.0,0.0,-1.0));
+#70=DIRECTION('',(-1.0,0.0,0.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=CYLINDRICAL_SURFACE('',#71,1.75);
+#73=CARTESIAN_POINT('',(-1.750000000000001,5.9,0.0));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(-1.750000000000001,5.9,-2.5));
+#76=VERTEX_POINT('',#75);
+#77=CARTESIAN_POINT('',(-1.750000000000001,5.9,0.0));
+#78=DIRECTION('',(0.0,0.0,-1.0));
+#79=VECTOR('',#78,2.5);
+#80=LINE('',#77,#79);
+#81=EDGE_CURVE('',#74,#76,#80,.T.);
+#82=ORIENTED_EDGE('',*,*,#81,.F.);
+#83=CARTESIAN_POINT('',(1.749999999999999,5.9,0.0));
+#84=VERTEX_POINT('',#83);
+#85=CARTESIAN_POINT('',(-1.110223E-015,5.9,0.0));
+#86=DIRECTION('',(0.0,0.0,-1.0));
+#87=DIRECTION('',(-1.0,0.0,0.0));
+#88=AXIS2_PLACEMENT_3D('',#85,#86,#87);
+#89=CIRCLE('',#88,1.75);
+#90=EDGE_CURVE('',#74,#84,#89,.T.);
+#91=ORIENTED_EDGE('',*,*,#90,.T.);
+#92=CARTESIAN_POINT('',(1.749999999999999,5.9,-2.5));
+#93=VERTEX_POINT('',#92);
+#94=CARTESIAN_POINT('',(1.749999999999999,5.9,-2.5));
+#95=DIRECTION('',(0.0,0.0,1.0));
+#96=VECTOR('',#95,2.5);
+#97=LINE('',#94,#96);
+#98=EDGE_CURVE('',#93,#84,#97,.T.);
+#99=ORIENTED_EDGE('',*,*,#98,.F.);
+#100=CARTESIAN_POINT('',(-1.110223E-015,5.9,-2.5));
+#101=DIRECTION('',(0.0,0.0,1.0));
+#102=DIRECTION('',(-1.0,0.0,0.0));
+#103=AXIS2_PLACEMENT_3D('',#100,#101,#102);
+#104=CIRCLE('',#103,1.75);
+#105=EDGE_CURVE('',#93,#76,#104,.T.);
+#106=ORIENTED_EDGE('',*,*,#105,.T.);
+#107=EDGE_LOOP('',(#82,#91,#99,#106));
+#108=FACE_OUTER_BOUND('',#107,.T.);
+#109=ADVANCED_FACE('',(#108),#72,.T.);
+#110=CARTESIAN_POINT('',(-1.110223E-015,5.9,-2.5));
+#111=DIRECTION('',(0.0,0.0,-1.0));
+#112=DIRECTION('',(-1.0,0.0,0.0));
+#113=AXIS2_PLACEMENT_3D('',#110,#111,#112);
+#114=PLANE('',#113);
+#115=CARTESIAN_POINT('',(-1.750000000000001,5.9,-2.5));
+#116=DIRECTION('',(1.0,0.0,0.0));
+#117=VECTOR('',#116,3.5);
+#118=LINE('',#115,#117);
+#119=EDGE_CURVE('',#76,#93,#118,.T.);
+#120=ORIENTED_EDGE('',*,*,#119,.F.);
+#121=ORIENTED_EDGE('',*,*,#105,.F.);
+#122=EDGE_LOOP('',(#120,#121));
+#123=FACE_OUTER_BOUND('',#122,.T.);
+#124=ADVANCED_FACE('',(#123),#114,.T.);
+#125=CARTESIAN_POINT('',(5.9,5.9,0.0));
+#126=DIRECTION('',(0.0,1.0,0.0));
+#127=DIRECTION('',(0.0,0.0,1.0));
+#128=AXIS2_PLACEMENT_3D('',#125,#126,#127);
+#129=PLANE('',#128);
+#130=ORIENTED_EDGE('',*,*,#81,.T.);
+#131=ORIENTED_EDGE('',*,*,#119,.T.);
+#132=ORIENTED_EDGE('',*,*,#98,.T.);
+#133=CARTESIAN_POINT('',(3.9,5.9,0.0));
+#134=VERTEX_POINT('',#133);
+#135=CARTESIAN_POINT('',(1.749999999999999,5.9,0.0));
+#136=DIRECTION('',(1.0,0.0,0.0));
+#137=VECTOR('',#136,2.150000000000001);
+#138=LINE('',#135,#137);
+#139=EDGE_CURVE('',#84,#134,#138,.T.);
+#140=ORIENTED_EDGE('',*,*,#139,.T.);
+#141=CARTESIAN_POINT('',(3.9,5.9,-10.0));
+#142=VERTEX_POINT('',#141);
+#143=CARTESIAN_POINT('',(3.900000000000001,5.9,-10.0));
+#144=DIRECTION('',(0.0,0.0,1.0));
+#145=VECTOR('',#144,10.0);
+#146=LINE('',#143,#145);
+#147=EDGE_CURVE('',#142,#134,#146,.T.);
+#148=ORIENTED_EDGE('',*,*,#147,.F.);
+#149=CARTESIAN_POINT('',(-3.900000000000001,5.9,-10.0));
+#150=VERTEX_POINT('',#149);
+#151=CARTESIAN_POINT('',(3.9,5.9,-10.0));
+#152=DIRECTION('',(-1.0,0.0,0.0));
+#153=VECTOR('',#152,7.800000000000002);
+#154=LINE('',#151,#153);
+#155=EDGE_CURVE('',#142,#150,#154,.T.);
+#156=ORIENTED_EDGE('',*,*,#155,.T.);
+#157=CARTESIAN_POINT('',(-3.900000000000001,5.9,0.0));
+#158=VERTEX_POINT('',#157);
+#159=CARTESIAN_POINT('',(-3.900000000000001,5.9,0.0));
+#160=DIRECTION('',(0.0,0.0,-1.0));
+#161=VECTOR('',#160,10.0);
+#162=LINE('',#159,#161);
+#163=EDGE_CURVE('',#158,#150,#162,.T.);
+#164=ORIENTED_EDGE('',*,*,#163,.F.);
+#165=CARTESIAN_POINT('',(-3.900000000000001,5.9,0.0));
+#166=DIRECTION('',(1.0,0.0,0.0));
+#167=VECTOR('',#166,2.15);
+#168=LINE('',#165,#167);
+#169=EDGE_CURVE('',#158,#74,#168,.T.);
+#170=ORIENTED_EDGE('',*,*,#169,.T.);
+#171=EDGE_LOOP('',(#130,#131,#132,#140,#148,#156,#164,#170));
+#172=FACE_OUTER_BOUND('',#171,.T.);
+#173=ADVANCED_FACE('',(#172),#129,.T.);
+#174=CARTESIAN_POINT('',(-3.9,-3.900000000000001,0.0));
+#175=DIRECTION('',(0.0,0.0,-1.0));
+#176=DIRECTION('',(-0.707106781186547,-0.707106781186548,0.0));
+#177=AXIS2_PLACEMENT_3D('',#174,#175,#176);
+#178=CYLINDRICAL_SURFACE('',#177,2.0);
+#179=CARTESIAN_POINT('',(-5.9,-3.900000000000002,-10.0));
+#180=VERTEX_POINT('',#179);
+#181=CARTESIAN_POINT('',(-3.899999999999999,-5.900000000000002,-10.0));
+#182=VERTEX_POINT('',#181);
+#183=CARTESIAN_POINT('',(-3.9,-3.900000000000001,-10.0));
+#184=DIRECTION('',(0.0,0.0,1.0));
+#185=DIRECTION('',(-0.707106781186547,-0.707106781186548,0.0));
+#186=AXIS2_PLACEMENT_3D('',#183,#184,#185);
+#187=CIRCLE('',#186,2.0);
+#188=EDGE_CURVE('',#180,#182,#187,.T.);
+#189=ORIENTED_EDGE('',*,*,#188,.T.);
+#190=CARTESIAN_POINT('',(-3.899999999999999,-5.900000000000002,0.0));
+#191=VERTEX_POINT('',#190);
+#192=CARTESIAN_POINT('',(-3.9,-5.900000000000002,-10.0));
+#193=DIRECTION('',(0.0,0.0,1.0));
+#194=VECTOR('',#193,10.0);
+#195=LINE('',#192,#194);
+#196=EDGE_CURVE('',#182,#191,#195,.T.);
+#197=ORIENTED_EDGE('',*,*,#196,.T.);
+#198=CARTESIAN_POINT('',(-5.9,-3.900000000000002,0.0));
+#199=VERTEX_POINT('',#198);
+#200=CARTESIAN_POINT('',(-3.9,-3.900000000000001,0.0));
+#201=DIRECTION('',(0.0,0.0,-1.0));
+#202=DIRECTION('',(-0.707106781186547,-0.707106781186548,0.0));
+#203=AXIS2_PLACEMENT_3D('',#200,#201,#202);
+#204=CIRCLE('',#203,2.0);
+#205=EDGE_CURVE('',#191,#199,#204,.T.);
+#206=ORIENTED_EDGE('',*,*,#205,.T.);
+#207=CARTESIAN_POINT('',(-5.9,-3.900000000000002,0.0));
+#208=DIRECTION('',(0.0,0.0,-1.0));
+#209=VECTOR('',#208,10.0);
+#210=LINE('',#207,#209);
+#211=EDGE_CURVE('',#199,#180,#210,.T.);
+#212=ORIENTED_EDGE('',*,*,#211,.T.);
+#213=EDGE_LOOP('',(#189,#197,#206,#212));
+#214=FACE_OUTER_BOUND('',#213,.T.);
+#215=ADVANCED_FACE('',(#214),#178,.T.);
+#216=CARTESIAN_POINT('',(-5.9,-5.900000000000002,0.0));
+#217=DIRECTION('',(0.0,-1.0,0.0));
+#218=DIRECTION('',(0.0,0.0,-1.0));
+#219=AXIS2_PLACEMENT_3D('',#216,#217,#218);
+#220=PLANE('',#219);
+#221=ORIENTED_EDGE('',*,*,#196,.F.);
+#222=CARTESIAN_POINT('',(3.900000000000001,-5.9,-10.0));
+#223=VERTEX_POINT('',#222);
+#224=CARTESIAN_POINT('',(-3.9,-5.900000000000001,-10.0));
+#225=DIRECTION('',(1.0,0.0,0.0));
+#226=VECTOR('',#225,7.800000000000001);
+#227=LINE('',#224,#226);
+#228=EDGE_CURVE('',#182,#223,#227,.T.);
+#229=ORIENTED_EDGE('',*,*,#228,.T.);
+#230=CARTESIAN_POINT('',(3.900000000000001,-5.9,0.0));
+#231=VERTEX_POINT('',#230);
+#232=CARTESIAN_POINT('',(3.900000000000001,-5.9,0.0));
+#233=DIRECTION('',(0.0,0.0,-1.0));
+#234=VECTOR('',#233,10.0);
+#235=LINE('',#232,#234);
+#236=EDGE_CURVE('',#231,#223,#235,.T.);
+#237=ORIENTED_EDGE('',*,*,#236,.F.);
+#238=CARTESIAN_POINT('',(3.9,-5.9,0.0));
+#239=DIRECTION('',(-1.0,0.0,0.0));
+#240=VECTOR('',#239,7.800000000000001);
+#241=LINE('',#238,#240);
+#242=EDGE_CURVE('',#231,#191,#241,.T.);
+#243=ORIENTED_EDGE('',*,*,#242,.T.);
+#244=EDGE_LOOP('',(#221,#229,#237,#243));
+#245=FACE_OUTER_BOUND('',#244,.T.);
+#246=ADVANCED_FACE('',(#245),#220,.T.);
+#247=CARTESIAN_POINT('',(-2.775558E-016,-2.523234E-016,-10.0));
+#248=DIRECTION('',(0.0,0.0,1.0));
+#249=DIRECTION('',(1.0,0.0,0.0));
+#250=AXIS2_PLACEMENT_3D('',#247,#248,#249);
+#251=PLANE('',#250);
+#252=ORIENTED_EDGE('',*,*,#188,.F.);
+#253=CARTESIAN_POINT('',(-5.900000000000002,3.9,-10.0));
+#254=VERTEX_POINT('',#253);
+#255=CARTESIAN_POINT('',(-5.900000000000001,3.9,-10.0));
+#256=DIRECTION('',(0.0,-1.0,0.0));
+#257=VECTOR('',#256,7.800000000000003);
+#258=LINE('',#255,#257);
+#259=EDGE_CURVE('',#254,#180,#258,.T.);
+#260=ORIENTED_EDGE('',*,*,#259,.F.);
+#261=CARTESIAN_POINT('',(-3.900000000000001,3.900000000000001,-10.0));
+#262=DIRECTION('',(0.0,0.0,1.0));
+#263=DIRECTION('',(-0.707106781186548,0.707106781186547,0.0));
+#264=AXIS2_PLACEMENT_3D('',#261,#262,#263);
+#265=CIRCLE('',#264,2.0);
+#266=EDGE_CURVE('',#150,#254,#265,.T.);
+#267=ORIENTED_EDGE('',*,*,#266,.F.);
+#268=ORIENTED_EDGE('',*,*,#155,.F.);
+#269=CARTESIAN_POINT('',(5.9,3.9,-10.0));
+#270=VERTEX_POINT('',#269);
+#271=CARTESIAN_POINT('',(3.900000000000001,3.9,-10.0));
+#272=DIRECTION('',(0.0,0.0,1.0));
+#273=DIRECTION('',(0.707106781186548,0.707106781186548,0.0));
+#274=AXIS2_PLACEMENT_3D('',#271,#272,#273);
+#275=CIRCLE('',#274,2.0);
+#276=EDGE_CURVE('',#270,#142,#275,.T.);
+#277=ORIENTED_EDGE('',*,*,#276,.F.);
+#278=CARTESIAN_POINT('',(5.9,-3.9,-10.0));
+#279=VERTEX_POINT('',#278);
+#280=CARTESIAN_POINT('',(5.9,-3.9,-10.0));
+#281=DIRECTION('',(0.0,1.0,0.0));
+#282=VECTOR('',#281,7.8);
+#283=LINE('',#280,#282);
+#284=EDGE_CURVE('',#279,#270,#283,.T.);
+#285=ORIENTED_EDGE('',*,*,#284,.F.);
+#286=CARTESIAN_POINT('',(3.9,-3.9,-10.0));
+#287=DIRECTION('',(0.0,0.0,1.0));
+#288=DIRECTION('',(0.707106781186548,-0.707106781186547,0.0));
+#289=AXIS2_PLACEMENT_3D('',#286,#287,#288);
+#290=CIRCLE('',#289,2.0);
+#291=EDGE_CURVE('',#223,#279,#290,.T.);
+#292=ORIENTED_EDGE('',*,*,#291,.F.);
+#293=ORIENTED_EDGE('',*,*,#228,.F.);
+#294=EDGE_LOOP('',(#252,#260,#267,#268,#277,#285,#292,#293));
+#295=FACE_OUTER_BOUND('',#294,.T.);
+#296=CARTESIAN_POINT('',(-1.550000000000001,-3.5,-10.0));
+#297=VERTEX_POINT('',#296);
+#298=CARTESIAN_POINT('',(-3.0,-3.5,-10.0));
+#299=DIRECTION('',(0.0,0.0,1.0));
+#300=DIRECTION('',(-1.0,0.0,0.0));
+#301=AXIS2_PLACEMENT_3D('',#298,#299,#300);
+#302=CIRCLE('',#301,1.45);
+#303=EDGE_CURVE('',#297,#297,#302,.T.);
+#304=ORIENTED_EDGE('',*,*,#303,.T.);
+#305=EDGE_LOOP('',(#304));
+#306=FACE_BOUND('',#305,.T.);
+#307=ADVANCED_FACE('',(#295,#306),#251,.F.);
+#308=CARTESIAN_POINT('',(3.9,-3.9,0.0));
+#309=DIRECTION('',(0.0,0.0,-1.0));
+#310=DIRECTION('',(0.707106781186548,-0.707106781186547,0.0));
+#311=AXIS2_PLACEMENT_3D('',#308,#309,#310);
+#312=CYLINDRICAL_SURFACE('',#311,2.0);
+#313=ORIENTED_EDGE('',*,*,#291,.T.);
+#314=CARTESIAN_POINT('',(5.9,-3.9,0.0));
+#315=VERTEX_POINT('',#314);
+#316=CARTESIAN_POINT('',(5.9,-3.9,-10.0));
+#317=DIRECTION('',(0.0,0.0,1.0));
+#318=VECTOR('',#317,10.0);
+#319=LINE('',#316,#318);
+#320=EDGE_CURVE('',#279,#315,#319,.T.);
+#321=ORIENTED_EDGE('',*,*,#320,.T.);
+#322=CARTESIAN_POINT('',(3.9,-3.9,0.0));
+#323=DIRECTION('',(0.0,0.0,-1.0));
+#324=DIRECTION('',(0.707106781186548,-0.707106781186547,0.0));
+#325=AXIS2_PLACEMENT_3D('',#322,#323,#324);
+#326=CIRCLE('',#325,2.0);
+#327=EDGE_CURVE('',#315,#231,#326,.T.);
+#328=ORIENTED_EDGE('',*,*,#327,.T.);
+#329=ORIENTED_EDGE('',*,*,#236,.T.);
+#330=EDGE_LOOP('',(#313,#321,#328,#329));
+#331=FACE_OUTER_BOUND('',#330,.T.);
+#332=ADVANCED_FACE('',(#331),#312,.T.);
+#333=CARTESIAN_POINT('',(5.9,-5.9,0.0));
+#334=DIRECTION('',(1.0,0.0,0.0));
+#335=DIRECTION('',(0.0,0.0,-1.0));
+#336=AXIS2_PLACEMENT_3D('',#333,#334,#335);
+#337=PLANE('',#336);
+#338=ORIENTED_EDGE('',*,*,#320,.F.);
+#339=ORIENTED_EDGE('',*,*,#284,.T.);
+#340=CARTESIAN_POINT('',(5.9,3.9,0.0));
+#341=VERTEX_POINT('',#340);
+#342=CARTESIAN_POINT('',(5.9,3.9,0.0));
+#343=DIRECTION('',(0.0,0.0,-1.0));
+#344=VECTOR('',#343,10.0);
+#345=LINE('',#342,#344);
+#346=EDGE_CURVE('',#341,#270,#345,.T.);
+#347=ORIENTED_EDGE('',*,*,#346,.F.);
+#348=CARTESIAN_POINT('',(5.9,3.9,0.0));
+#349=DIRECTION('',(0.0,-1.0,0.0));
+#350=VECTOR('',#349,7.8);
+#351=LINE('',#348,#350);
+#352=EDGE_CURVE('',#341,#315,#351,.T.);
+#353=ORIENTED_EDGE('',*,*,#352,.T.);
+#354=EDGE_LOOP('',(#338,#339,#347,#353));
+#355=FACE_OUTER_BOUND('',#354,.T.);
+#356=ADVANCED_FACE('',(#355),#337,.T.);
+#357=CARTESIAN_POINT('',(3.900000000000001,3.9,0.0));
+#358=DIRECTION('',(0.0,0.0,-1.0));
+#359=DIRECTION('',(0.707106781186548,0.707106781186548,0.0));
+#360=AXIS2_PLACEMENT_3D('',#357,#358,#359);
+#361=CYLINDRICAL_SURFACE('',#360,2.0);
+#362=ORIENTED_EDGE('',*,*,#276,.T.);
+#363=ORIENTED_EDGE('',*,*,#147,.T.);
+#364=CARTESIAN_POINT('',(3.900000000000001,3.9,0.0));
+#365=DIRECTION('',(0.0,0.0,-1.0));
+#366=DIRECTION('',(0.707106781186548,0.707106781186548,0.0));
+#367=AXIS2_PLACEMENT_3D('',#364,#365,#366);
+#368=CIRCLE('',#367,2.0);
+#369=EDGE_CURVE('',#134,#341,#368,.T.);
+#370=ORIENTED_EDGE('',*,*,#369,.T.);
+#371=ORIENTED_EDGE('',*,*,#346,.T.);
+#372=EDGE_LOOP('',(#362,#363,#370,#371));
+#373=FACE_OUTER_BOUND('',#372,.T.);
+#374=ADVANCED_FACE('',(#373),#361,.T.);
+#375=CARTESIAN_POINT('',(-3.900000000000001,3.900000000000001,0.0));
+#376=DIRECTION('',(0.0,0.0,-1.0));
+#377=DIRECTION('',(-0.707106781186548,0.707106781186547,0.0));
+#378=AXIS2_PLACEMENT_3D('',#375,#376,#377);
+#379=CYLINDRICAL_SURFACE('',#378,2.0);
+#380=ORIENTED_EDGE('',*,*,#266,.T.);
+#381=CARTESIAN_POINT('',(-5.900000000000002,3.9,0.0));
+#382=VERTEX_POINT('',#381);
+#383=CARTESIAN_POINT('',(-5.900000000000002,3.9,-10.0));
+#384=DIRECTION('',(0.0,0.0,1.0));
+#385=VECTOR('',#384,10.0);
+#386=LINE('',#383,#385);
+#387=EDGE_CURVE('',#254,#382,#386,.T.);
+#388=ORIENTED_EDGE('',*,*,#387,.T.);
+#389=CARTESIAN_POINT('',(-3.900000000000001,3.900000000000001,0.0));
+#390=DIRECTION('',(0.0,0.0,-1.0));
+#391=DIRECTION('',(-0.707106781186548,0.707106781186547,0.0));
+#392=AXIS2_PLACEMENT_3D('',#389,#390,#391);
+#393=CIRCLE('',#392,2.0);
+#394=EDGE_CURVE('',#382,#158,#393,.T.);
+#395=ORIENTED_EDGE('',*,*,#394,.T.);
+#396=ORIENTED_EDGE('',*,*,#163,.T.);
+#397=EDGE_LOOP('',(#380,#388,#395,#396));
+#398=FACE_OUTER_BOUND('',#397,.T.);
+#399=ADVANCED_FACE('',(#398),#379,.T.);
+#400=CARTESIAN_POINT('',(-3.0,-3.5,0.0));
+#401=DIRECTION('',(0.0,0.0,-1.0));
+#402=DIRECTION('',(-1.0,0.0,0.0));
+#403=AXIS2_PLACEMENT_3D('',#400,#401,#402);
+#404=CYLINDRICAL_SURFACE('',#403,1.45);
+#405=ORIENTED_EDGE('',*,*,#303,.F.);
+#406=EDGE_LOOP('',(#405));
+#407=FACE_OUTER_BOUND('',#406,.T.);
+#408=CARTESIAN_POINT('',(-1.550000000000001,-3.5,0.0));
+#409=VERTEX_POINT('',#408);
+#410=CARTESIAN_POINT('',(-3.0,-3.5,0.0));
+#411=DIRECTION('',(0.0,0.0,-1.0));
+#412=DIRECTION('',(-1.0,0.0,0.0));
+#413=AXIS2_PLACEMENT_3D('',#410,#411,#412);
+#414=CIRCLE('',#413,1.45);
+#415=EDGE_CURVE('',#409,#409,#414,.T.);
+#416=ORIENTED_EDGE('',*,*,#415,.F.);
+#417=EDGE_LOOP('',(#416));
+#418=FACE_BOUND('',#417,.T.);
+#419=ADVANCED_FACE('',(#407,#418),#404,.F.);
+#420=CARTESIAN_POINT('',(-5.900000000000002,5.9,0.0));
+#421=DIRECTION('',(-1.0,0.0,0.0));
+#422=DIRECTION('',(0.0,0.0,1.0));
+#423=AXIS2_PLACEMENT_3D('',#420,#421,#422);
+#424=PLANE('',#423);
+#425=ORIENTED_EDGE('',*,*,#211,.F.);
+#426=CARTESIAN_POINT('',(-5.9,-3.900000000000002,0.0));
+#427=DIRECTION('',(0.0,1.0,0.0));
+#428=VECTOR('',#427,7.800000000000003);
+#429=LINE('',#426,#428);
+#430=EDGE_CURVE('',#199,#382,#429,.T.);
+#431=ORIENTED_EDGE('',*,*,#430,.T.);
+#432=ORIENTED_EDGE('',*,*,#387,.F.);
+#433=ORIENTED_EDGE('',*,*,#259,.T.);
+#434=EDGE_LOOP('',(#425,#431,#432,#433));
+#435=FACE_OUTER_BOUND('',#434,.T.);
+#436=ADVANCED_FACE('',(#435),#424,.T.);
+#437=CARTESIAN_POINT('',(-2.775558E-016,-2.775558E-016,0.0));
+#438=DIRECTION('',(0.0,0.0,1.0));
+#439=DIRECTION('',(1.0,0.0,0.0));
+#440=AXIS2_PLACEMENT_3D('',#437,#438,#439);
+#441=PLANE('',#440);
+#442=ORIENTED_EDGE('',*,*,#169,.F.);
+#443=ORIENTED_EDGE('',*,*,#394,.F.);
+#444=ORIENTED_EDGE('',*,*,#430,.F.);
+#445=ORIENTED_EDGE('',*,*,#205,.F.);
+#446=ORIENTED_EDGE('',*,*,#242,.F.);
+#447=ORIENTED_EDGE('',*,*,#327,.F.);
+#448=ORIENTED_EDGE('',*,*,#352,.F.);
+#449=ORIENTED_EDGE('',*,*,#369,.F.);
+#450=ORIENTED_EDGE('',*,*,#139,.F.);
+#451=ORIENTED_EDGE('',*,*,#90,.F.);
+#452=EDGE_LOOP('',(#442,#443,#444,#445,#446,#447,#448,#449,#450,#451));
+#453=FACE_OUTER_BOUND('',#452,.T.);
+#454=ORIENTED_EDGE('',*,*,#415,.T.);
+#455=EDGE_LOOP('',(#454));
+#456=FACE_BOUND('',#455,.T.);
+#457=ADVANCED_FACE('',(#453,#456),#441,.T.);
+#458=CLOSED_SHELL('',(#109,#124,#173,#215,#246,#307,#332,#356,#374,#399,#419,#436,#457));
+#459=MANIFOLD_SOLID_BREP('Solid1',#458);
+#460=DRAUGHTING_PRE_DEFINED_COLOUR('cyan');
+#461=FILL_AREA_STYLE_COLOUR('Blue (Sky - Bright)',#460);
+#462=FILL_AREA_STYLE('Blue (Sky - Bright)',(#461));
+#463=SURFACE_STYLE_FILL_AREA(#462);
+#464=SURFACE_SIDE_STYLE('Blue (Sky - Bright)',(#463));
+#465=SURFACE_STYLE_USAGE(.BOTH.,#464);
+#466=PRESENTATION_STYLE_ASSIGNMENT((#465));
+#467=STYLED_ITEM('',(#466),#459);
+#468=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#467),#36);
+#469=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#459),#36);
+#470=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#469,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/STEP/PM522GripPanel2.stp

@@ -0,0 +1,544 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM522\\STEP2.0\\PM522GripPanel2.stp','2015-10-01T18:16:52',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM522GripPanel2','PM522GripPanel2',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(10.9,-46.480201065739479,-63.945743294299298));
+#69=DIRECTION('',(1.0,0.0,0.0));
+#70=DIRECTION('',(0.0,0.0,-1.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=PLANE('',#71);
+#73=CARTESIAN_POINT('',(10.9,-45.127307429758204,-96.543316873428111));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(10.9,-45.127307429758218,-61.514955961234612));
+#76=VERTEX_POINT('',#75);
+#77=CARTESIAN_POINT('',(10.9,-45.127307429758211,-96.543316873428111));
+#78=DIRECTION('',(0.0,0.0,1.0));
+#79=VECTOR('',#78,35.028360912193499);
+#80=LINE('',#77,#79);
+#81=EDGE_CURVE('',#74,#76,#80,.T.);
+#82=ORIENTED_EDGE('',*,*,#81,.F.);
+#83=CARTESIAN_POINT('',(10.9,-86.924462309888611,-115.1526091903459));
+#84=VERTEX_POINT('',#83);
+#85=CARTESIAN_POINT('',(10.9,-86.924462309888611,-115.1526091903459));
+#86=DIRECTION('',(0.0,0.9135454576426,0.406736643075801));
+#87=VECTOR('',#86,45.752682070126816);
+#88=LINE('',#85,#87);
+#89=EDGE_CURVE('',#84,#74,#88,.T.);
+#90=ORIENTED_EDGE('',*,*,#89,.F.);
+#91=CARTESIAN_POINT('',(10.9,-99.940034888314244,-85.919154545782689));
+#92=VERTEX_POINT('',#91);
+#93=CARTESIAN_POINT('',(10.9,-99.940034888314244,-85.919154545782675));
+#94=DIRECTION('',(0.0,0.406736643075801,-0.9135454576426));
+#95=VECTOR('',#94,32.000000000000014);
+#96=LINE('',#93,#95);
+#97=EDGE_CURVE('',#92,#84,#96,.T.);
+#98=ORIENTED_EDGE('',*,*,#97,.F.);
+#99=CARTESIAN_POINT('',(10.9,-45.127307429758211,-61.51495596123462));
+#100=DIRECTION('',(0.0,-0.9135454576426,-0.406736643075801));
+#101=VECTOR('',#100,60.000000000000007);
+#102=LINE('',#99,#101);
+#103=EDGE_CURVE('',#76,#92,#102,.T.);
+#104=ORIENTED_EDGE('',*,*,#103,.F.);
+#105=EDGE_LOOP('',(#82,#90,#98,#104));
+#106=FACE_OUTER_BOUND('',#105,.T.);
+#107=ADVANCED_FACE('',(#106),#72,.F.);
+#108=CARTESIAN_POINT('',(0.0,-45.127307429758204,-96.543316873428111));
+#109=DIRECTION('',(0.0,0.406736643075801,-0.9135454576426));
+#110=DIRECTION('',(-1.0,0.0,0.0));
+#111=AXIS2_PLACEMENT_3D('',#108,#109,#110);
+#112=PLANE('',#111);
+#113=ORIENTED_EDGE('',*,*,#89,.T.);
+#114=CARTESIAN_POINT('',(14.248326061749154,-45.127307429758204,-96.543316873428111));
+#115=VERTEX_POINT('',#114);
+#116=CARTESIAN_POINT('',(10.9,-45.127307429758204,-96.543316873428111));
+#117=DIRECTION('',(1.0,0.0,0.0));
+#118=VECTOR('',#117,3.348326061749154);
+#119=LINE('',#116,#118);
+#120=EDGE_CURVE('',#74,#115,#119,.T.);
+#121=ORIENTED_EDGE('',*,*,#120,.T.);
+#122=CARTESIAN_POINT('',(15.0,-60.90669424328901,-103.56875251900271));
+#123=VERTEX_POINT('',#122);
+#124=CARTESIAN_POINT('',(14.248326061749152,-45.127307429758204,-96.543316873428111));
+#125=CARTESIAN_POINT('',(14.567724905636254,-48.404763815560784,-98.002534471235066));
+#126=CARTESIAN_POINT('',(14.744065644502664,-50.704797016571135,-99.026575229487122));
+#127=CARTESIAN_POINT('',(14.970130875059954,-56.133696913071617,-101.44367719307768));
+#128=CARTESIAN_POINT('',(15.0,-58.420654891898536,-102.46189648734644));
+#129=CARTESIAN_POINT('',(15.0,-60.906694247046474,-103.56875252106423));
+#130=B_SPLINE_CURVE_WITH_KNOTS('',3,(#124,#125,#126,#127,#128,#129),.UNSPECIFIED.,.F.,.U.,(4,2,4),(-1.814573529709644,-0.816392660381613,0.0),.UNSPECIFIED.);
+#131=EDGE_CURVE('',#115,#123,#130,.T.);
+#132=ORIENTED_EDGE('',*,*,#131,.T.);
+#133=CARTESIAN_POINT('',(15.0,-73.742499812807694,-109.28362134619768));
+#134=VERTEX_POINT('',#133);
+#135=CARTESIAN_POINT('',(15.0,-60.906694243144628,-103.56875251932703));
+#136=DIRECTION('',(0.0,-0.9135454576426,-0.406736643075801));
+#137=VECTOR('',#136,14.050538435609212);
+#138=LINE('',#135,#137);
+#139=EDGE_CURVE('',#123,#134,#138,.T.);
+#140=ORIENTED_EDGE('',*,*,#139,.T.);
+#141=CARTESIAN_POINT('',(11.623965774685221,-86.924462309888611,-115.1526091903459));
+#142=VERTEX_POINT('',#141);
+#143=CARTESIAN_POINT('',(15.0,-73.742499808428178,-109.28362135603423));
+#144=CARTESIAN_POINT('',(14.999999997979781,-77.42550182374265,-110.92339950130139));
+#145=CARTESIAN_POINT('',(14.860022522547524,-80.956839520452434,-112.49565234138798));
+#146=CARTESIAN_POINT('',(12.948223335721798,-85.217385525227769,-114.39256963779064));
+#147=CARTESIAN_POINT('',(12.300459106315014,-86.169121281943561,-114.81630969751434));
+#148=CARTESIAN_POINT('',(11.623965774685201,-86.924462309888611,-115.1526091903459));
+#149=B_SPLINE_CURVE_WITH_KNOTS('',3,(#143,#144,#145,#146,#147,#148),.UNSPECIFIED.,.F.,.U.,(4,2,4),(-1.138471291539147,-0.366398395793104,-0.064390520142176),.UNSPECIFIED.);
+#150=EDGE_CURVE('',#134,#142,#149,.T.);
+#151=ORIENTED_EDGE('',*,*,#150,.T.);
+#152=CARTESIAN_POINT('',(10.9,-86.924462309888611,-115.1526091903459));
+#153=DIRECTION('',(1.0,0.0,0.0));
+#154=VECTOR('',#153,0.723965774685221);
+#155=LINE('',#152,#154);
+#156=EDGE_CURVE('',#84,#142,#155,.T.);
+#157=ORIENTED_EDGE('',*,*,#156,.F.);
+#158=EDGE_LOOP('',(#113,#121,#132,#140,#151,#157));
+#159=FACE_OUTER_BOUND('',#158,.T.);
+#160=ADVANCED_FACE('',(#159),#112,.T.);
+#161=CARTESIAN_POINT('',(0.0,-45.127307429758218,-61.514955961234612));
+#162=DIRECTION('',(0.0,1.0,0.0));
+#163=DIRECTION('',(0.0,0.0,1.0));
+#164=AXIS2_PLACEMENT_3D('',#161,#162,#163);
+#165=PLANE('',#164);
+#166=ORIENTED_EDGE('',*,*,#81,.T.);
+#167=CARTESIAN_POINT('',(14.895486604751856,-45.127307429758218,-61.514955961234612));
+#168=VERTEX_POINT('',#167);
+#169=CARTESIAN_POINT('',(10.9,-45.127307429758218,-61.514955961234612));
+#170=DIRECTION('',(1.0,0.0,0.0));
+#171=VECTOR('',#170,3.995486604751855);
+#172=LINE('',#169,#171);
+#173=EDGE_CURVE('',#76,#168,#172,.T.);
+#174=ORIENTED_EDGE('',*,*,#173,.T.);
+#175=CARTESIAN_POINT('',(15.0,-45.127307430212568,-62.980928623700535));
+#176=VERTEX_POINT('',#175);
+#177=CARTESIAN_POINT('',(14.895486604751849,-45.127307429758218,-61.514955961234612));
+#178=CARTESIAN_POINT('',(14.964041884592907,-45.127307429758218,-62.000184721992653));
+#179=CARTESIAN_POINT('',(15.0,-45.127307429758218,-62.494588918580654));
+#180=CARTESIAN_POINT('',(15.0,-45.127307429758218,-62.980928621896055));
+#181=B_SPLINE_CURVE_WITH_KNOTS('',3,(#177,#178,#179,#180),.UNSPECIFIED.,.F.,.U.,(4,4),(-0.145901910994621,0.0),.UNSPECIFIED.);
+#182=EDGE_CURVE('',#168,#176,#181,.T.);
+#183=ORIENTED_EDGE('',*,*,#182,.T.);
+#184=CARTESIAN_POINT('',(15.0,-45.127307429751546,-91.856518789085726));
+#185=VERTEX_POINT('',#184);
+#186=CARTESIAN_POINT('',(15.0,-45.127307429758218,-62.980928623700528));
+#187=DIRECTION('',(0.0,0.0,-1.0));
+#188=VECTOR('',#187,28.875590165385198);
+#189=LINE('',#186,#188);
+#190=EDGE_CURVE('',#176,#185,#189,.T.);
+#191=ORIENTED_EDGE('',*,*,#190,.T.);
+#192=CARTESIAN_POINT('',(15.000000000000002,-45.127307429758204,-91.85651878909502));
+#193=CARTESIAN_POINT('',(15.000000000000002,-45.127307429758204,-93.442423328472742));
+#194=CARTESIAN_POINT('',(14.746144812999054,-45.127307429758204,-95.03757239858821));
+#195=CARTESIAN_POINT('',(14.248326061749149,-45.127307429758204,-96.543316873428154));
+#196=B_SPLINE_CURVE_WITH_KNOTS('',3,(#192,#193,#194,#195),.UNSPECIFIED.,.F.,.U.,(4,4),(-0.528137591465065,-0.052961201334533),.UNSPECIFIED.);
+#197=EDGE_CURVE('',#185,#115,#196,.T.);
+#198=ORIENTED_EDGE('',*,*,#197,.T.);
+#199=ORIENTED_EDGE('',*,*,#120,.F.);
+#200=EDGE_LOOP('',(#166,#174,#183,#191,#198,#199));
+#201=FACE_OUTER_BOUND('',#200,.T.);
+#202=ADVANCED_FACE('',(#201),#165,.T.);
+#203=CARTESIAN_POINT('',(0.0,-86.924462309888611,-115.1526091903459));
+#204=DIRECTION('',(0.0,-0.913545457642601,-0.406736643075801));
+#205=DIRECTION('',(0.0,0.406736643075801,-0.913545457642601));
+#206=AXIS2_PLACEMENT_3D('',#203,#204,#205);
+#207=PLANE('',#206);
+#208=ORIENTED_EDGE('',*,*,#97,.T.);
+#209=ORIENTED_EDGE('',*,*,#156,.T.);
+#210=CARTESIAN_POINT('',(15.0,-92.834169878683937,-101.87918866781153));
+#211=VERTEX_POINT('',#210);
+#212=CARTESIAN_POINT('',(11.623965774685214,-86.924462309888611,-115.1526091903459));
+#213=CARTESIAN_POINT('',(12.088144075988868,-87.166257519271511,-114.60952825831805));
+#214=CARTESIAN_POINT('',(12.490633906676468,-87.427296576657781,-114.02322493600309));
+#215=CARTESIAN_POINT('',(13.357606548918753,-88.111169345951936,-112.48722154749673));
+#216=CARTESIAN_POINT('',(13.750286856939457,-88.547696761727167,-111.5067649188518));
+#217=CARTESIAN_POINT('',(14.293490340779977,-89.36548895242214,-109.66997358513916));
+#218=CARTESIAN_POINT('',(15.000000000000004,-90.428691823830462,-107.28198083783198));
+#219=CARTESIAN_POINT('',(15.0,-92.834169878683952,-101.87918866781148));
+#220=B_SPLINE_CURVE_WITH_KNOTS('',3,(#212,#213,#214,#215,#216,#217,#218,#219),.UNSPECIFIED.,.F.,.U.,(4,2,2,4),(-5.327880940845131,-3.906748600518635,-1.774227694359858,0.0),.UNSPECIFIED.);
+#221=EDGE_CURVE('',#142,#211,#220,.T.);
+#222=ORIENTED_EDGE('',*,*,#221,.T.);
+#223=CARTESIAN_POINT('',(15.0,-97.499615029859427,-91.400427291638266));
+#224=VERTEX_POINT('',#223);
+#225=CARTESIAN_POINT('',(15.0,-92.834169878683966,-101.87918866781153));
+#226=DIRECTION('',(0.0,-0.4067366430758,0.913545457642601));
+#227=VECTOR('',#226,11.470432356167205);
+#228=LINE('',#225,#227);
+#229=EDGE_CURVE('',#211,#224,#228,.T.);
+#230=ORIENTED_EDGE('',*,*,#229,.T.);
+#231=CARTESIAN_POINT('',(13.392304845413275,-99.940034888314244,-85.919154545782689));
+#232=VERTEX_POINT('',#231);
+#233=CARTESIAN_POINT('',(2.999999999999998,-97.499615029859427,-91.400427291638266));
+#234=DIRECTION('',(-1.387779E-016,-0.9135454576426,-0.406736643075801));
+#235=DIRECTION('',(0.707106781186547,-0.287606238475952,0.645974188021251));
+#236=AXIS2_PLACEMENT_3D('',#233,#234,#235);
+#237=CIRCLE('',#236,12.000000000000002);
+#238=EDGE_CURVE('',#224,#232,#237,.T.);
+#239=ORIENTED_EDGE('',*,*,#238,.T.);
+#240=CARTESIAN_POINT('',(10.9,-99.940034888314244,-85.919154545782689));
+#241=DIRECTION('',(1.0,0.0,0.0));
+#242=VECTOR('',#241,2.492304845413274);
+#243=LINE('',#240,#242);
+#244=EDGE_CURVE('',#92,#232,#243,.T.);
+#245=ORIENTED_EDGE('',*,*,#244,.F.);
+#246=EDGE_LOOP('',(#208,#209,#222,#230,#239,#245));
+#247=FACE_OUTER_BOUND('',#246,.T.);
+#248=ADVANCED_FACE('',(#247),#207,.T.);
+#249=CARTESIAN_POINT('',(0.0,-48.127307429758233,-62.85064201716024));
+#250=DIRECTION('',(0.0,-0.406736643075801,0.913545457642601));
+#251=DIRECTION('',(1.0,0.0,0.0));
+#252=AXIS2_PLACEMENT_3D('',#249,#250,#251);
+#253=PLANE('',#252);
+#254=ORIENTED_EDGE('',*,*,#103,.T.);
+#255=ORIENTED_EDGE('',*,*,#244,.T.);
+#256=CARTESIAN_POINT('',(13.392304845413259,-49.960919310439714,-63.667018624162175));
+#257=VERTEX_POINT('',#256);
+#258=CARTESIAN_POINT('',(13.392304845413266,-99.940034888314258,-85.919154545782675));
+#259=DIRECTION('',(0.0,0.913545457642601,0.406736643075801));
+#260=VECTOR('',#259,54.708953079188184);
+#261=LINE('',#258,#260);
+#262=EDGE_CURVE('',#232,#257,#261,.T.);
+#263=ORIENTED_EDGE('',*,*,#262,.T.);
+#264=CARTESIAN_POINT('',(14.503683204551891,-46.083267839130059,-61.940576957234903));
+#265=VERTEX_POINT('',#264);
+#266=CARTESIAN_POINT('',(13.392304845413257,-49.960919310439735,-63.667018624162175));
+#267=CARTESIAN_POINT('',(13.392304845413257,-48.98210727974665,-63.231223430572513));
+#268=CARTESIAN_POINT('',(13.584259357765902,-48.023426198662136,-62.804391113211111));
+#269=CARTESIAN_POINT('',(14.122007575015845,-46.756299495229214,-62.24022995692232));
+#270=CARTESIAN_POINT('',(14.300236936624762,-46.413133762573906,-62.087442728929254));
+#271=CARTESIAN_POINT('',(14.503683204804789,-46.083267839159404,-61.940576957519326));
+#272=B_SPLINE_CURVE_WITH_KNOTS('',3,(#266,#267,#268,#269,#270,#271),.UNSPECIFIED.,.F.,.U.,(4,2,4),(-0.636870737709211,-0.315788031065162,-0.190802125554055),.UNSPECIFIED.);
+#273=EDGE_CURVE('',#257,#265,#272,.T.);
+#274=ORIENTED_EDGE('',*,*,#273,.T.);
+#275=CARTESIAN_POINT('',(14.503475474577685,-46.083138934694432,-61.941092123878072));
+#276=CARTESIAN_POINT('',(14.625217607015912,-45.885458060073709,-61.853360969884889));
+#277=CARTESIAN_POINT('',(14.722054771258531,-45.672950719167034,-61.758799861521865));
+#278=CARTESIAN_POINT('',(14.796951344641442,-45.456495656714182,-61.662316997695676));
+#279=CARTESIAN_POINT('',(14.834417032733944,-45.348217834517413,-61.614053149042647));
+#280=CARTESIAN_POINT('',(14.866677723852835,-45.238017874047891,-61.564903226340022));
+#281=CARTESIAN_POINT('',(14.893795784660902,-45.126697962205704,-61.515238291645446));
+#282=B_SPLINE_CURVE_WITH_KNOTS('',3,(#275,#276,#277,#278,#279,#280,#281),.UNSPECIFIED.,.F.,.U.,(4,3,4),(-0.162534197323951,-0.087885921108148,-0.050542449750394),.UNSPECIFIED.);
+#283=EDGE_CURVE('',#265,#168,#282,.T.);
+#284=ORIENTED_EDGE('',*,*,#283,.T.);
+#285=ORIENTED_EDGE('',*,*,#173,.F.);
+#286=EDGE_LOOP('',(#254,#255,#263,#274,#284,#285));
+#287=FACE_OUTER_BOUND('',#286,.T.);
+#288=ADVANCED_FACE('',(#287),#253,.T.);
+#289=CARTESIAN_POINT('',(15.0,-45.127307429749372,-91.856518789088838));
+#290=CARTESIAN_POINT('',(15.0,-44.372971573668863,-92.938003835836014));
+#291=CARTESIAN_POINT('',(14.735857394048681,-43.618941263546645,-94.019050823882537));
+#292=CARTESIAN_POINT('',(14.227764409710321,-42.922857906975842,-95.017019746283296));
+#293=CARTESIAN_POINT('',(15.0,-47.428456487556794,-93.46157033345456));
+#294=CARTESIAN_POINT('',(15.0,-46.637026037774007,-94.517181899860475));
+#295=CARTESIAN_POINT('',(14.735857394048681,-45.84591829961326,-95.572367380616811));
+#296=CARTESIAN_POINT('',(14.227764409710321,-45.1156127084205,-96.546466293230381));
+#297=CARTESIAN_POINT('',(15.000000000000002,-52.627909763426842,-97.485458643239994));
+#298=CARTESIAN_POINT('',(15.000000000000002,-51.800238711123797,-98.510899173692778));
+#299=CARTESIAN_POINT('',(14.735857394048683,-50.972905493624722,-99.53592636629908));
+#300=CARTESIAN_POINT('',(14.227764409710321,-50.209159541962549,-100.48218607369486));
+#301=CARTESIAN_POINT('',(15.0,-57.777482699041173,-101.50469228680079));
+#302=CARTESIAN_POINT('',(15.0,-56.991308560356764,-102.56570787429732));
+#303=CARTESIAN_POINT('',(14.735857394048681,-56.205456334250734,-103.6262959834508));
+#304=CARTESIAN_POINT('',(14.227764409710321,-55.48000597918211,-104.60538449450263));
+#305=CARTESIAN_POINT('',(15.0,-60.935523038297404,-103.58777869276219));
+#306=CARTESIAN_POINT('',(15.0,-60.209494119516222,-104.68846688621204));
+#307=CARTESIAN_POINT('',(14.735857394048681,-59.483759280885053,-105.78870924267014));
+#308=CARTESIAN_POINT('',(14.227764409710321,-58.8137968991701,-106.8043983764406));
+#309=B_SPLINE_SURFACE_WITH_KNOTS('',3,3,((#289,#293,#297,#301,#305),(#290,#294,#298,#302,#306),(#291,#295,#299,#303,#307),(#292,#296,#300,#304,#308)),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(4,1,4),(0.0,0.25182872880984),(5.330284159468458,6.172822662850858,7.296207334027391),.UNSPECIFIED.);
+#310=ORIENTED_EDGE('',*,*,#131,.F.);
+#311=ORIENTED_EDGE('',*,*,#197,.F.);
+#312=CARTESIAN_POINT('',(15.0,-45.127307429749372,-91.856518789088838));
+#313=CARTESIAN_POINT('',(15.0,-47.428456487556794,-93.46157033345456));
+#314=CARTESIAN_POINT('',(15.000000000000002,-52.618867018673903,-97.478460408431602));
+#315=CARTESIAN_POINT('',(14.999999999999996,-57.759570559666535,-101.49071199363748));
+#316=CARTESIAN_POINT('',(14.999999999999998,-60.906694044079671,-103.56875282069865));
+#317=B_SPLINE_CURVE_WITH_KNOTS('',3,(#312,#313,#314,#315,#316),.UNSPECIFIED.,.F.,.U.,(4,1,4),(5.330284159468458,6.172822662850858,7.292788255034238),.UNSPECIFIED.);
+#318=EDGE_CURVE('',#185,#123,#317,.T.);
+#319=ORIENTED_EDGE('',*,*,#318,.T.);
+#320=EDGE_LOOP('',(#310,#311,#319));
+#321=FACE_OUTER_BOUND('',#320,.T.);
+#322=ADVANCED_FACE('',(#321),#309,.F.);
+#323=CARTESIAN_POINT('',(15.0,-73.74249972873946,-109.28362132055453));
+#324=CARTESIAN_POINT('',(15.0,-73.528393558707691,-110.48168087954249));
+#325=CARTESIAN_POINT('',(14.476588428620021,-73.028717144575282,-113.27768673151465));
+#326=CARTESIAN_POINT('',(12.806512216611388,-72.606578284702564,-115.6398208830702));
+#327=CARTESIAN_POINT('',(11.585330625427229,-72.418583628888811,-116.69176999038875));
+#328=CARTESIAN_POINT('',(15.0,-74.944968849855002,-109.49851552691685));
+#329=CARTESIAN_POINT('',(15.0,-74.798899604104079,-110.70885047151963));
+#330=CARTESIAN_POINT('',(14.476588428620021,-74.459069348445539,-113.53343610637395));
+#331=CARTESIAN_POINT('',(12.806512216611388,-74.17297567323628,-115.9196507465481));
+#332=CARTESIAN_POINT('',(11.585330625427229,-74.044720436239416,-116.9823781835771));
+#333=CARTESIAN_POINT('',(15.000000000000075,-77.413703890754974,-109.71915558228154));
+#334=CARTESIAN_POINT('',(15.000000000000075,-77.424987231666719,-110.94473897551346));
+#335=CARTESIAN_POINT('',(14.476588428620085,-77.450939681258703,-113.80493569484597));
+#336=CARTESIAN_POINT('',(12.806512216611445,-77.472505970838029,-116.22125864802626));
+#337=CARTESIAN_POINT('',(11.585330625427286,-77.482413241566462,-117.29737489515495));
+#338=CARTESIAN_POINT('',(15.000000000000142,-81.051915056095936,-109.30527531499472));
+#339=CARTESIAN_POINT('',(15.000000000000142,-81.317401807106663,-110.50212372714026));
+#340=CARTESIAN_POINT('',(14.476588428620154,-81.937180078693643,-113.29527092916126));
+#341=CARTESIAN_POINT('',(12.806512216611496,-82.460964138162538,-115.65495972773276));
+#342=CARTESIAN_POINT('',(11.585330625427337,-82.694073209106023,-116.70584539473222));
+#343=CARTESIAN_POINT('',(15.000000000000306,-84.562699874876458,-108.14270134866113));
+#344=CARTESIAN_POINT('',(15.000000000000306,-85.060073697853312,-109.26135873662449));
+#345=CARTESIAN_POINT('',(14.4765884286203,-86.220981396115505,-111.87201520053854));
+#346=CARTESIAN_POINT('',(12.806512216611626,-87.201883614277151,-114.07752173888699));
+#347=CARTESIAN_POINT('',(11.585330625427465,-87.638599756775193,-115.05975223972908));
+#348=CARTESIAN_POINT('',(15.000000000000709,-87.23720186277292,-106.6515062252063));
+#349=CARTESIAN_POINT('',(15.000000000000709,-87.890562512112638,-107.68205158837245));
+#350=CARTESIAN_POINT('',(14.476588428620678,-89.415204485434558,-110.08727419814711));
+#351=CARTESIAN_POINT('',(12.806512216611935,-90.70311098994317,-112.11941404449252));
+#352=CARTESIAN_POINT('',(11.585330625427776,-91.276790442415944,-113.02427830328584));
+#353=CARTESIAN_POINT('',(15.000000000000991,-88.95372510138759,-105.39238940206096));
+#354=CARTESIAN_POINT('',(15.000000000000991,-89.700091423801297,-106.3546769124554));
+#355=CARTESIAN_POINT('',(14.476588428620936,-91.442101783772912,-108.60030361133559));
+#356=CARTESIAN_POINT('',(12.806512216612154,-92.91394250209126,-110.49733245490131));
+#357=CARTESIAN_POINT('',(11.585330625427995,-93.569285035528395,-111.34226330992355));
+#358=CARTESIAN_POINT('',(15.00000000000113,-89.77447392364013,-104.71103061187824));
+#359=CARTESIAN_POINT('',(15.00000000000113,-90.564311830016806,-105.63719423633106));
+#360=CARTESIAN_POINT('',(14.476588428621067,-92.407453869255221,-107.79881938594332));
+#361=CARTESIAN_POINT('',(12.806512216612262,-93.964429805681604,-109.62516819299427));
+#362=CARTESIAN_POINT('',(11.585330625428103,-94.657942306213045,-110.43838068369639));
+#363=CARTESIAN_POINT('',(15.000000000001181,-90.173620110347045,-104.35920872583378));
+#364=CARTESIAN_POINT('',(15.000000000001181,-90.984304812274402,-105.26700363892598));
+#365=CARTESIAN_POINT('',(14.476588428621112,-92.876342475293256,-107.38552579065457));
+#366=CARTESIAN_POINT('',(12.806512216612301,-94.474856733024041,-109.17523882975452));
+#367=CARTESIAN_POINT('',(11.58533062542814,-95.18667363904639,-109.97232278212694));
+#368=CARTESIAN_POINT('',(15.00000000000119,-90.370554201154533,-104.180437528505));
+#369=CARTESIAN_POINT('',(15.00000000000119,-91.191505309717641,-105.07891083001272));
+#370=CARTESIAN_POINT('',(14.476588428621122,-93.107321607391924,-107.17585087432002));
+#371=CARTESIAN_POINT('',(12.806512216612305,-94.725753926151441,-108.9474935903943));
+#372=CARTESIAN_POINT('',(11.585330625428147,-95.446585189777977,-109.7363927568673));
+#373=CARTESIAN_POINT('',(15.000000000001201,-90.475289497650948,-104.08395181822317));
+#374=CARTESIAN_POINT('',(15.000000000001201,-91.3017522756479,-104.97734771783587));
+#375=CARTESIAN_POINT('',(14.476588428621127,-93.23056444525929,-107.0623120713514));
+#376=CARTESIAN_POINT('',(12.806512216612315,-94.860101376758621,-108.82371836880139));
+#377=CARTESIAN_POINT('',(11.585330625428156,-95.585772129121153,-109.60815935258148));
+#378=CARTESIAN_POINT('',(15.000000000001199,-90.53091998135551,-104.03226395824517));
+#379=CARTESIAN_POINT('',(15.000000000001199,-91.360097386806672,-104.9231381332166));
+#380=CARTESIAN_POINT('',(14.476588428621127,-93.29519586250035,-107.00226420749063));
+#381=CARTESIAN_POINT('',(12.806512216612315,-94.929997343756867,-108.7587824154071));
+#382=CARTESIAN_POINT('',(11.585330625428156,-95.658051658694177,-109.54100921378597));
+#383=CARTESIAN_POINT('',(15.000000000001201,-90.558666977902959,-104.00635716088205));
+#384=CARTESIAN_POINT('',(15.000000000001201,-91.389640493395007,-104.89555414361269));
+#385=CARTESIAN_POINT('',(14.476588428621131,-93.328634978414925,-106.97104203448905));
+#386=CARTESIAN_POINT('',(12.806512216612315,-94.966448823729678,-108.72474710234292));
+#387=CARTESIAN_POINT('',(11.585330625428156,-95.696080202461502,-109.50550125199806));
+#388=CARTESIAN_POINT('',(15.000000000001082,-90.868074085464613,-103.71711940101426));
+#389=CARTESIAN_POINT('',(15.000000000001082,-91.69926179214724,-104.60611610064326));
+#390=CARTESIAN_POINT('',(14.476588428621017,-93.639310669117293,-106.68061773725279));
+#391=CARTESIAN_POINT('',(12.806512216612219,-95.278538615824885,-108.43299994040179));
+#392=CARTESIAN_POINT('',(11.585330625428064,-96.008358063864335,-109.21357823266453));
+#393=CARTESIAN_POINT('',(15.000000000000854,-91.624253844831117,-103.01023208614757));
+#394=CARTESIAN_POINT('',(15.000000000000854,-92.455293252050197,-103.89936745605505));
+#395=CARTESIAN_POINT('',(14.476588428620811,-94.394319619862273,-105.97482392436831));
+#396=CARTESIAN_POINT('',(12.806512216612054,-96.032045363212845,-107.72860849304331));
+#397=CARTESIAN_POINT('',(11.58533062542789,-96.761734597785733,-108.50930854392362));
+#398=CARTESIAN_POINT('',(15.0,-92.380468854301796,-102.30331531368086));
+#399=CARTESIAN_POINT('',(15.0,-93.21161740117401,-103.19234863038751));
+#400=CARTESIAN_POINT('',(14.476588428620021,-95.151255325659235,-105.26722934037005));
+#401=CARTESIAN_POINT('',(12.806512216611383,-96.789834503015754,-107.02020889509475));
+#402=CARTESIAN_POINT('',(11.585330625427229,-97.51961956701534,-107.80081933876589));
+#403=CARTESIAN_POINT('',(15.0,-92.834169878683994,-101.87918866781149));
+#404=CARTESIAN_POINT('',(15.0,-93.665282874771307,-102.76825522699751));
+#405=CARTESIAN_POINT('',(14.476588428620021,-95.604916662822106,-104.8431398048366));
+#406=CARTESIAN_POINT('',(12.806512216611388,-97.243566742554293,-106.59605306086308));
+#407=CARTESIAN_POINT('',(11.585330625427229,-97.973320591397538,-107.37669269289654));
+#408=B_SPLINE_SURFACE_WITH_KNOTS('',3,3,((#323,#328,#333,#338,#343,#348,#353,#358,#363,#368,#373,#378,#383,#388,#393,#398,#403),(#324,#329,#334,#339,#344,#349,#354,#359,#364,#369,#374,#379,#384,#389,#394,#399,#404),(#325,#330,#335,#340,#345,#350,#355,#360,#365,#370,#375,#380,#385,#390,#395,#400,#405),(#326,#331,#336,#341,#346,#351,#356,#361,#366,#371,#376,#381,#386,#391,#396,#401,#406),(#327,#332,#337,#342,#347,#352,#357,#362,#367,#372,#377,#382,#387,#392,#397,#402,#407)),.UNSPECIFIED.,.F.,.F.,.F.,(4,1,4),(4,1,1,1,1,1,1,1,1,1,1,2,1,4),(0.0,0.232437659352909,0.542354538490121),(8.698733564929086,9.063153988422249,9.427574411915412,9.791994835408575,10.156415258901738,10.338625470648321,10.42973057652161,10.475283129458255,10.498059405926579,10.509447544160739,10.517988647836361,10.520835682394901,10.645049696300234,10.831370717158231),.UNSPECIFIED.);
+#409=ORIENTED_EDGE('',*,*,#221,.F.);
+#410=ORIENTED_EDGE('',*,*,#150,.F.);
+#411=CARTESIAN_POINT('',(14.999999999999998,-73.74249981464672,-109.2836213359071));
+#412=CARTESIAN_POINT('',(15.0,-74.944968936671842,-109.49851553717974));
+#413=CARTESIAN_POINT('',(15.000000000000075,-77.413703890754974,-109.71915558228154));
+#414=CARTESIAN_POINT('',(15.000000000000142,-81.051915056095936,-109.30527531499472));
+#415=CARTESIAN_POINT('',(15.000000000000306,-84.562699874876458,-108.14270134866113));
+#416=CARTESIAN_POINT('',(15.000000000000709,-87.23720186277292,-106.6515062252063));
+#417=CARTESIAN_POINT('',(15.000000000000991,-88.95372510138759,-105.39238940206096));
+#418=CARTESIAN_POINT('',(15.00000000000113,-89.77447392364013,-104.71103061187824));
+#419=CARTESIAN_POINT('',(15.000000000001181,-90.173620110347045,-104.35920872583378));
+#420=CARTESIAN_POINT('',(15.00000000000119,-90.370554201154533,-104.180437528505));
+#421=CARTESIAN_POINT('',(15.000000000001201,-90.475289497650948,-104.08395181822317));
+#422=CARTESIAN_POINT('',(15.000000000001199,-90.53091998135551,-104.03226395824517));
+#423=CARTESIAN_POINT('',(15.000000000001201,-90.558666977902959,-104.00635716088205));
+#424=CARTESIAN_POINT('',(15.000000000001082,-90.868074085464613,-103.71711940101426));
+#425=CARTESIAN_POINT('',(15.000000000000854,-91.624253844831117,-103.01023208614757));
+#426=CARTESIAN_POINT('',(15.0,-92.380468854301796,-102.30331531368086));
+#427=CARTESIAN_POINT('',(15.0,-92.834169878683994,-101.87918866781149));
+#428=B_SPLINE_CURVE_WITH_KNOTS('',3,(#411,#412,#413,#414,#415,#416,#417,#418,#419,#420,#421,#422,#423,#424,#425,#426,#427),.UNSPECIFIED.,.F.,.U.,(4,1,1,1,1,1,1,1,1,1,1,2,1,4),(8.698733573607441,9.063153995617666,9.427574417627891,9.791994839638115,10.156415261648339,10.338625472653453,10.429730578156008,10.475283130907286,10.498059407282925,10.509447545470744,10.51798864911161,10.520835683658564,10.645049697058433,10.831370717158231),.UNSPECIFIED.);
+#429=EDGE_CURVE('',#134,#211,#428,.T.);
+#430=ORIENTED_EDGE('',*,*,#429,.T.);
+#431=EDGE_LOOP('',(#409,#410,#430));
+#432=FACE_OUTER_BOUND('',#431,.T.);
+#433=ADVANCED_FACE('',(#432),#408,.F.);
+#434=CARTESIAN_POINT('',(15.0,-49.14331655957217,-69.870816097325061));
+#435=CARTESIAN_POINT('',(15.0,-49.14331655957217,-69.870816097325061));
+#436=CARTESIAN_POINT('',(15.0,-49.14331655957217,-69.870816097325061));
+#437=CARTESIAN_POINT('',(15.0,-49.14331655957217,-69.870816097325061));
+#438=CARTESIAN_POINT('',(15.0,-49.140318639461043,-69.866015582006185));
+#439=CARTESIAN_POINT('',(15.0,-49.140587754118023,-69.865824331665152));
+#440=CARTESIAN_POINT('',(14.999896816809841,-49.140793925191218,-69.86582994507863));
+#441=CARTESIAN_POINT('',(15.0,-49.141170979502832,-69.865483295952913));
+#442=CARTESIAN_POINT('',(14.999999999999998,-49.137324329341709,-69.861220647176935));
+#443=CARTESIAN_POINT('',(14.999999999999998,-49.137906240499191,-69.860878908132875));
+#444=CARTESIAN_POINT('',(15.000093140740798,-49.138545711048309,-69.860357956523785));
+#445=CARTESIAN_POINT('',(14.999995381510622,-49.139026697421372,-69.860161606267354));
+#446=CARTESIAN_POINT('',(15.000000000000353,-47.495811915401951,-67.232849842852431));
+#447=CARTESIAN_POINT('',(15.000000000000353,-47.651489971107083,-67.134948401003967));
+#448=CARTESIAN_POINT('',(14.998177248546989,-47.806226273560213,-67.039355256272202));
+#449=CARTESIAN_POINT('',(15.002180814975786,-47.965215263805788,-66.936527086077888));
+#450=CARTESIAN_POINT('',(15.0,-45.84498199517985,-64.587583218791892));
+#451=CARTESIAN_POINT('',(15.0,-46.158955190536872,-64.393561235607436));
+#452=CARTESIAN_POINT('',(14.916625100153231,-46.472169780235731,-64.206137743280692));
+#453=CARTESIAN_POINT('',(14.745937072195103,-46.776117705154725,-64.027227408815278));
+#454=CARTESIAN_POINT('',(15.0,-44.547467440505528,-61.781261783819865));
+#455=CARTESIAN_POINT('',(15.0,-45.020752962887201,-61.562436225865568));
+#456=CARTESIAN_POINT('',(14.786316469734373,-45.491171473899371,-61.34493624271321));
+#457=CARTESIAN_POINT('',(14.418817756986698,-45.826924425539303,-61.189699449059169));
+#458=B_SPLINE_SURFACE_WITH_KNOTS('',3,3,((#434,#438,#442,#446,#450,#454),(#435,#439,#443,#447,#451,#455),(#436,#440,#444,#448,#452,#456),(#437,#441,#445,#449,#453,#457)),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(4,2,4),(0.0,1.0),(-0.001697917108918,0.0,0.927958771166387),.UNSPECIFIED.);
+#459=ORIENTED_EDGE('',*,*,#283,.F.);
+#460=CARTESIAN_POINT('',(15.0,-49.143316559572156,-69.870816097325047));
+#461=VERTEX_POINT('',#460);
+#462=CARTESIAN_POINT('',(14.50343204534293,-46.083001727746037,-61.940696957749417));
+#463=CARTESIAN_POINT('',(14.789049229814186,-46.98533766218268,-64.53951456788667));
+#464=CARTESIAN_POINT('',(15.001988780330006,-48.068358400604836,-67.193427663658298));
+#465=CARTESIAN_POINT('',(14.999995381510622,-49.139026697421372,-69.860161606267354));
+#466=CARTESIAN_POINT('',(15.0,-49.141170979502832,-69.865483295952913));
+#467=CARTESIAN_POINT('',(15.0,-49.14331655957217,-69.870816097325061));
+#468=B_SPLINE_CURVE_WITH_KNOTS('',3,(#462,#463,#464,#465,#466,#467),.UNSPECIFIED.,.F.,.U.,(4,2,4),(-0.846269579675396,0.0,0.001697917108918),.UNSPECIFIED.);
+#469=EDGE_CURVE('',#265,#461,#468,.T.);
+#470=ORIENTED_EDGE('',*,*,#469,.T.);
+#471=CARTESIAN_POINT('',(15.0,-49.14331655957217,-69.870816097325061));
+#472=CARTESIAN_POINT('',(15.0,-49.140318639461043,-69.866015582006185));
+#473=CARTESIAN_POINT('',(14.999999999999998,-49.137324329341709,-69.861220647176935));
+#474=CARTESIAN_POINT('',(15.000000000000302,-47.731150312890151,-67.609670979166538));
+#475=CARTESIAN_POINT('',(15.000000000000087,-46.318942472342286,-65.347010340549403));
+#476=CARTESIAN_POINT('',(15.000000000000018,-45.127332731233508,-62.980915881629784));
+#477=B_SPLINE_CURVE_WITH_KNOTS('',3,(#471,#472,#473,#474,#475,#476),.UNSPECIFIED.,.F.,.U.,(4,2,4),(-0.001697917108918,0.0,0.794676857868032),.UNSPECIFIED.);
+#478=EDGE_CURVE('',#461,#176,#477,.T.);
+#479=ORIENTED_EDGE('',*,*,#478,.T.);
+#480=ORIENTED_EDGE('',*,*,#182,.F.);
+#481=EDGE_LOOP('',(#459,#470,#479,#480));
+#482=FACE_OUTER_BOUND('',#481,.T.);
+#483=ADVANCED_FACE('',(#482),#458,.F.);
+#484=CARTESIAN_POINT('',(15.0,-3.999999999999995,-68.500000000000028));
+#485=DIRECTION('',(1.0,0.0,0.0));
+#486=DIRECTION('',(0.0,0.0,-1.0));
+#487=AXIS2_PLACEMENT_3D('',#484,#485,#486);
+#488=PLANE('',#487);
+#489=ORIENTED_EDGE('',*,*,#229,.F.);
+#490=ORIENTED_EDGE('',*,*,#429,.F.);
+#491=ORIENTED_EDGE('',*,*,#139,.F.);
+#492=ORIENTED_EDGE('',*,*,#318,.F.);
+#493=ORIENTED_EDGE('',*,*,#190,.F.);
+#494=ORIENTED_EDGE('',*,*,#478,.F.);
+#495=CARTESIAN_POINT('',(15.0,-97.499615029859427,-91.400427291638266));
+#496=DIRECTION('',(0.0,0.913545457642601,0.406736643075801));
+#497=VECTOR('',#496,52.932558599842913);
+#498=LINE('',#495,#497);
+#499=EDGE_CURVE('',#224,#461,#498,.T.);
+#500=ORIENTED_EDGE('',*,*,#499,.F.);
+#501=EDGE_LOOP('',(#489,#490,#491,#492,#493,#494,#500));
+#502=FACE_OUTER_BOUND('',#501,.T.);
+#503=ADVANCED_FACE('',(#502),#488,.T.);
+#504=CARTESIAN_POINT('',(15.0,-49.143316559572163,-69.870816097325076));
+#505=CARTESIAN_POINT('',(15.0,-47.642523894070912,-69.473547450574742));
+#506=CARTESIAN_POINT('',(15.367924504602911,-46.142896084130697,-69.076587147943499));
+#507=CARTESIAN_POINT('',(16.065126056257586,-44.801956755936018,-68.721632619891977));
+#508=CARTESIAN_POINT('',(15.000000000000002,-49.437203139966932,-67.640866622577136));
+#509=CARTESIAN_POINT('',(15.044589332299514,-47.96370982429633,-67.251075923512701));
+#510=CARTESIAN_POINT('',(15.443311565448436,-46.51825780039146,-66.800924268312528));
+#511=CARTESIAN_POINT('',(16.155648888499069,-45.24708406035824,-66.336227733849896));
+#512=CARTESIAN_POINT('',(14.404904249434855,-49.730681470608658,-65.414014860971434));
+#513=CARTESIAN_POINT('',(14.489952309135655,-48.293112371148936,-65.007131793071679));
+#514=CARTESIAN_POINT('',(14.898242162622935,-46.906985789350919,-64.487161087144727));
+#515=CARTESIAN_POINT('',(15.589934349505155,-45.70761052848902,-63.905119802047381));
+#516=CARTESIAN_POINT('',(13.297598852892207,-49.982875313371466,-63.500421098207099));
+#517=CARTESIAN_POINT('',(13.401305763798506,-48.580823505660646,-63.065925059648471));
+#518=CARTESIAN_POINT('',(13.788102460858951,-47.248557593087867,-62.476934567121376));
+#519=CARTESIAN_POINT('',(14.421370452249382,-46.112204734436837,-61.789210033522338));
+#520=B_SPLINE_SURFACE_WITH_KNOTS('',3,3,((#504,#508,#512,#516),(#505,#509,#513,#517),(#506,#510,#514,#518),(#507,#511,#515,#519)),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(4,4),(0.0,0.2965022607344),(-1.570796326794901,-1.03162266314908),.UNSPECIFIED.);
+#521=ORIENTED_EDGE('',*,*,#273,.F.);
+#522=CARTESIAN_POINT('',(2.999999999999998,-49.143316559572163,-69.870816097325047));
+#523=DIRECTION('',(-5.802508E-016,0.991427122099207,0.130660864707396));
+#524=DIRECTION('',(-3.592845E-015,-0.130660864707396,0.991427122099207));
+#525=AXIS2_PLACEMENT_3D('',#522,#523,#524);
+#526=ELLIPSE('',#525,12.514883514639399,12.000000000000002);
+#527=EDGE_CURVE('',#257,#461,#526,.T.);
+#528=ORIENTED_EDGE('',*,*,#527,.T.);
+#529=ORIENTED_EDGE('',*,*,#469,.F.);
+#530=EDGE_LOOP('',(#521,#528,#529));
+#531=FACE_OUTER_BOUND('',#530,.T.);
+#532=ADVANCED_FACE('',(#531),#520,.T.);
+#533=CARTESIAN_POINT('',(2.999999999999998,-56.513127880938114,-73.152067502908793));
+#534=DIRECTION('',(0.0,0.913545457642601,0.406736643075801));
+#535=DIRECTION('',(0.707106781186547,-0.287606238475952,0.645974188021251));
+#536=AXIS2_PLACEMENT_3D('',#533,#534,#535);
+#537=CYLINDRICAL_SURFACE('',#536,12.000000000000002);
+#538=ORIENTED_EDGE('',*,*,#238,.F.);
+#539=ORIENTED_EDGE('',*,*,#499,.T.);
+#540=ORIENTED_EDGE('',*,*,#527,.F.);
+#541=ORIENTED_EDGE('',*,*,#262,.F.);
+#542=EDGE_LOOP('',(#538,#539,#540,#541));
+#543=FACE_OUTER_BOUND('',#542,.T.);
+#544=ADVANCED_FACE('',(#543),#537,.T.);
+#545=CLOSED_SHELL('',(#107,#160,#202,#248,#288,#322,#433,#483,#503,#532,#544));
+#546=MANIFOLD_SOLID_BREP('Solid2',#545);
+#547=COLOUR_RGB('',0.917647004127502,0.921568989753723,0.933332979679108);
+#548=FILL_AREA_STYLE_COLOUR('',#547);
+#549=FILL_AREA_STYLE('',(#548));
+#550=SURFACE_STYLE_FILL_AREA(#549);
+#551=SURFACE_SIDE_STYLE('',(#550));
+#552=SURFACE_STYLE_USAGE(.BOTH.,#551);
+#553=PRESENTATION_STYLE_ASSIGNMENT((#552));
+#554=STYLED_ITEM('',(#553),#532);
+#555=STYLED_ITEM('',(#553),#544);
+#556=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#554,#555,#564),#67);
+#557=COLOUR_RGB('Black Asphalt',0.639216005802155,0.639216005802155,0.639216005802155);
+#558=FILL_AREA_STYLE_COLOUR('Black Asphalt',#557);
+#559=FILL_AREA_STYLE('Black Asphalt',(#558));
+#560=SURFACE_STYLE_FILL_AREA(#559);
+#561=SURFACE_SIDE_STYLE('Black Asphalt',(#560));
+#562=SURFACE_STYLE_USAGE(.BOTH.,#561);
+#563=PRESENTATION_STYLE_ASSIGNMENT((#562));
+#564=STYLED_ITEM('',(#563),#546);
+#565=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#546),#36);
+#566=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#565,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/STEP/PM522GripPin2.stp

@@ -0,0 +1,374 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM522\\STEP2.0\\PM522GripPin2.stp','2015-10-01T18:17:47',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM522GripPin2','PM522GripPin2',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(0.0,0.0,30.500000000000004));
+#69=DIRECTION('',(0.0,1.0,0.0));
+#70=DIRECTION('',(1.0,0.0,0.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=CYLINDRICAL_SURFACE('',#71,0.875);
+#73=CARTESIAN_POINT('',(-0.875,3.903123748999,30.500000000000004));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(-0.875,3.903123748999,30.500000000000004));
+#76=CARTESIAN_POINT('',(-0.875,3.903123748999,30.38974398633972));
+#77=CARTESIAN_POINT('',(-0.852892096262692,3.908280756848077,30.272392313229449));
+#78=CARTESIAN_POINT('',(-0.763486720346607,3.926725275135368,30.056921827953801));
+#79=CARTESIAN_POINT('',(-0.6962077948332,3.939726702938651,29.958770927756746));
+#80=CARTESIAN_POINT('',(-0.54123533342186,3.963989796555402,29.803798466345405));
+#81=CARTESIAN_POINT('',(-0.443081792234842,3.976854104224627,29.736514643745778));
+#82=CARTESIAN_POINT('',(-0.227602063302999,3.994982771045772,29.647105708423652));
+#83=CARTESIAN_POINT('',(-0.110247104920009,4.0,29.625000000000004));
+#84=CARTESIAN_POINT('',(0.11024710492001,4.0,29.625000000000004));
+#85=CARTESIAN_POINT('',(0.227602063303,3.994982771045772,29.647105708423652));
+#86=CARTESIAN_POINT('',(0.443081792234842,3.976854104224627,29.736514643745778));
+#87=CARTESIAN_POINT('',(0.541235333421861,3.963989796555401,29.803798466345405));
+#88=CARTESIAN_POINT('',(0.6962077948332,3.93972670293865,29.958770927756746));
+#89=CARTESIAN_POINT('',(0.763486720346607,3.926725275135368,30.056921827953801));
+#90=CARTESIAN_POINT('',(0.852892096262692,3.908280756848076,30.272392313229449));
+#91=CARTESIAN_POINT('',(0.875,3.903123748999,30.38974398633972));
+#92=CARTESIAN_POINT('',(0.875,3.903123748999,30.610256013660283));
+#93=CARTESIAN_POINT('',(0.852892096262692,3.908280756848076,30.727607686770554));
+#94=CARTESIAN_POINT('',(0.763486720346607,3.926725275135368,30.943078172046206));
+#95=CARTESIAN_POINT('',(0.696207794833201,3.93972670293865,31.041229072243262));
+#96=CARTESIAN_POINT('',(0.541235333421861,3.963989796555401,31.196201533654602));
+#97=CARTESIAN_POINT('',(0.443081792234842,3.976854104224627,31.263485356254229));
+#98=CARTESIAN_POINT('',(0.227602063302999,3.994982771045772,31.352894291576355));
+#99=CARTESIAN_POINT('',(0.110247104920009,4.0,31.375));
+#100=CARTESIAN_POINT('',(-0.11024710492001,4.0,31.375));
+#101=CARTESIAN_POINT('',(-0.227602063302999,3.994982771045772,31.352894291576355));
+#102=CARTESIAN_POINT('',(-0.443081792234842,3.976854104224627,31.263485356254229));
+#103=CARTESIAN_POINT('',(-0.541235333421861,3.963989796555401,31.196201533654602));
+#104=CARTESIAN_POINT('',(-0.696207794833201,3.93972670293865,31.041229072243262));
+#105=CARTESIAN_POINT('',(-0.763486720346607,3.926725275135368,30.943078172046206));
+#106=CARTESIAN_POINT('',(-0.852892096262692,3.908280756848076,30.727607686770554));
+#107=CARTESIAN_POINT('',(-0.875,3.903123748999,30.610256013660283));
+#108=CARTESIAN_POINT('',(-0.875,3.903123748999,30.500000000000004));
+#109=B_SPLINE_CURVE_WITH_KNOTS('',3,(#75,#76,#77,#78,#79,#80,#81,#82,#83,#84,#85,#86,#87,#88,#89,#90,#91,#92,#93,#94,#95,#96,#97,#98,#99,#100,#101,#102,#103,#104,#105,#106,#107,#108),.UNSPECIFIED.,.T.,.U.,(4,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,4),(0.0,0.033076804098084,0.066153608196169,0.099227739672171,0.132301871148174,0.165376002624177,0.19845013410018,0.231526938198264,0.264603742296348,0.297680546394433,0.330757350492517,0.36383148196852,0.396905613444522,0.429979744920525,0.463053876396528,0.496130680494612,0.529207484592697),.UNSPECIFIED.);
+#110=EDGE_CURVE('',#74,#74,#109,.T.);
+#111=ORIENTED_EDGE('',*,*,#110,.F.);
+#112=EDGE_LOOP('',(#111));
+#113=FACE_OUTER_BOUND('',#112,.T.);
+#114=CARTESIAN_POINT('',(-0.875,-3.903123748999,30.500000000000004));
+#115=VERTEX_POINT('',#114);
+#116=CARTESIAN_POINT('',(-0.875,-3.903123748999,30.500000000000004));
+#117=CARTESIAN_POINT('',(-0.875,-3.903123748999,30.610256013660283));
+#118=CARTESIAN_POINT('',(-0.852892096262692,-3.908280756848076,30.727607686770554));
+#119=CARTESIAN_POINT('',(-0.763486720346607,-3.926725275135368,30.943078172046206));
+#120=CARTESIAN_POINT('',(-0.6962077948332,-3.93972670293865,31.041229072243262));
+#121=CARTESIAN_POINT('',(-0.541235333421861,-3.963989796555401,31.196201533654602));
+#122=CARTESIAN_POINT('',(-0.443081792234842,-3.976854104224627,31.263485356254229));
+#123=CARTESIAN_POINT('',(-0.227602063303,-3.994982771045772,31.352894291576355));
+#124=CARTESIAN_POINT('',(-0.11024710492001,-4.0,31.375));
+#125=CARTESIAN_POINT('',(0.110247104920009,-4.0,31.375));
+#126=CARTESIAN_POINT('',(0.227602063302999,-3.994982771045772,31.352894291576355));
+#127=CARTESIAN_POINT('',(0.443081792234842,-3.976854104224627,31.263485356254229));
+#128=CARTESIAN_POINT('',(0.541235333421861,-3.963989796555401,31.196201533654602));
+#129=CARTESIAN_POINT('',(0.696207794833201,-3.93972670293865,31.041229072243262));
+#130=CARTESIAN_POINT('',(0.763486720346607,-3.926725275135368,30.943078172046206));
+#131=CARTESIAN_POINT('',(0.852892096262692,-3.908280756848076,30.727607686770554));
+#132=CARTESIAN_POINT('',(0.875,-3.903123748999,30.610256013660283));
+#133=CARTESIAN_POINT('',(0.875,-3.903123748999,30.38974398633972));
+#134=CARTESIAN_POINT('',(0.852892096262692,-3.908280756848076,30.272392313229449));
+#135=CARTESIAN_POINT('',(0.763486720346607,-3.926725275135368,30.056921827953801));
+#136=CARTESIAN_POINT('',(0.696207794833201,-3.93972670293865,29.958770927756746));
+#137=CARTESIAN_POINT('',(0.541235333421861,-3.963989796555401,29.803798466345405));
+#138=CARTESIAN_POINT('',(0.443081792234842,-3.976854104224627,29.736514643745778));
+#139=CARTESIAN_POINT('',(0.227602063302999,-3.994982771045772,29.647105708423652));
+#140=CARTESIAN_POINT('',(0.11024710492001,-4.0,29.625000000000004));
+#141=CARTESIAN_POINT('',(-0.110247104920009,-4.0,29.625000000000004));
+#142=CARTESIAN_POINT('',(-0.227602063302999,-3.994982771045772,29.647105708423652));
+#143=CARTESIAN_POINT('',(-0.443081792234842,-3.976854104224627,29.736514643745778));
+#144=CARTESIAN_POINT('',(-0.54123533342186,-3.963989796555402,29.803798466345405));
+#145=CARTESIAN_POINT('',(-0.6962077948332,-3.939726702938651,29.958770927756746));
+#146=CARTESIAN_POINT('',(-0.763486720346607,-3.926725275135368,30.056921827953801));
+#147=CARTESIAN_POINT('',(-0.852892096262692,-3.908280756848077,30.272392313229449));
+#148=CARTESIAN_POINT('',(-0.875,-3.903123748998999,30.38974398633972));
+#149=CARTESIAN_POINT('',(-0.875,-3.903123748998999,30.500000000000004));
+#150=B_SPLINE_CURVE_WITH_KNOTS('',3,(#116,#117,#118,#119,#120,#121,#122,#123,#124,#125,#126,#127,#128,#129,#130,#131,#132,#133,#134,#135,#136,#137,#138,#139,#140,#141,#142,#143,#144,#145,#146,#147,#148,#149),.UNSPECIFIED.,.T.,.U.,(4,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,4),(0.0,0.033076804098084,0.066153608196169,0.099227739672171,0.132301871148174,0.165376002624177,0.19845013410018,0.231526938198264,0.264603742296348,0.297680546394433,0.330757350492517,0.36383148196852,0.396905613444522,0.429979744920525,0.463053876396528,0.496130680494612,0.529207484592697),.UNSPECIFIED.);
+#151=EDGE_CURVE('',#115,#115,#150,.T.);
+#152=ORIENTED_EDGE('',*,*,#151,.F.);
+#153=EDGE_LOOP('',(#152));
+#154=FACE_BOUND('',#153,.T.);
+#155=ADVANCED_FACE('',(#113,#154),#72,.F.);
+#156=CARTESIAN_POINT('',(-3.540548E-016,1.387779E-016,0.0));
+#157=DIRECTION('',(0.0,0.0,1.0));
+#158=DIRECTION('',(1.0,0.0,0.0));
+#159=AXIS2_PLACEMENT_3D('',#156,#157,#158);
+#160=PLANE('',#159);
+#161=CARTESIAN_POINT('',(0.0,4.0,0.0));
+#162=VERTEX_POINT('',#161);
+#163=CARTESIAN_POINT('',(0.0,-4.0,0.0));
+#164=VERTEX_POINT('',#163);
+#165=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#166=DIRECTION('',(0.0,0.0,-1.0));
+#167=DIRECTION('',(-1.0,0.0,0.0));
+#168=AXIS2_PLACEMENT_3D('',#165,#166,#167);
+#169=CIRCLE('',#168,4.0);
+#170=EDGE_CURVE('',#162,#164,#169,.T.);
+#171=ORIENTED_EDGE('',*,*,#170,.T.);
+#172=CARTESIAN_POINT('',(4.47213595499958,-4.0,0.0));
+#173=VERTEX_POINT('',#172);
+#174=CARTESIAN_POINT('',(4.47213595499958,-4.0,0.0));
+#175=DIRECTION('',(-1.0,0.0,0.0));
+#176=VECTOR('',#175,4.47213595499958);
+#177=LINE('',#174,#176);
+#178=EDGE_CURVE('',#173,#164,#177,.T.);
+#179=ORIENTED_EDGE('',*,*,#178,.F.);
+#180=CARTESIAN_POINT('',(4.47213595499958,4.0,0.0));
+#181=VERTEX_POINT('',#180);
+#182=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#183=DIRECTION('',(0.0,0.0,-1.0));
+#184=DIRECTION('',(-1.0,0.0,0.0));
+#185=AXIS2_PLACEMENT_3D('',#182,#183,#184);
+#186=CIRCLE('',#185,6.000000000000001);
+#187=EDGE_CURVE('',#181,#173,#186,.T.);
+#188=ORIENTED_EDGE('',*,*,#187,.F.);
+#189=CARTESIAN_POINT('',(0.0,4.0,0.0));
+#190=DIRECTION('',(1.0,0.0,0.0));
+#191=VECTOR('',#190,4.47213595499958);
+#192=LINE('',#189,#191);
+#193=EDGE_CURVE('',#162,#181,#192,.T.);
+#194=ORIENTED_EDGE('',*,*,#193,.F.);
+#195=EDGE_LOOP('',(#171,#179,#188,#194));
+#196=FACE_OUTER_BOUND('',#195,.T.);
+#197=ADVANCED_FACE('',(#196),#160,.T.);
+#198=CARTESIAN_POINT('',(-3.540548E-016,1.387779E-016,0.0));
+#199=DIRECTION('',(0.0,0.0,1.0));
+#200=DIRECTION('',(1.0,0.0,0.0));
+#201=AXIS2_PLACEMENT_3D('',#198,#199,#200);
+#202=PLANE('',#201);
+#203=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#204=DIRECTION('',(0.0,0.0,-1.0));
+#205=DIRECTION('',(-1.0,0.0,0.0));
+#206=AXIS2_PLACEMENT_3D('',#203,#204,#205);
+#207=CIRCLE('',#206,4.0);
+#208=EDGE_CURVE('',#164,#162,#207,.T.);
+#209=ORIENTED_EDGE('',*,*,#208,.T.);
+#210=CARTESIAN_POINT('',(-4.47213595499958,4.0,0.0));
+#211=VERTEX_POINT('',#210);
+#212=CARTESIAN_POINT('',(-4.47213595499958,4.0,0.0));
+#213=DIRECTION('',(1.0,0.0,0.0));
+#214=VECTOR('',#213,4.47213595499958);
+#215=LINE('',#212,#214);
+#216=EDGE_CURVE('',#211,#162,#215,.T.);
+#217=ORIENTED_EDGE('',*,*,#216,.F.);
+#218=CARTESIAN_POINT('',(-4.47213595499958,-4.0,0.0));
+#219=VERTEX_POINT('',#218);
+#220=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#221=DIRECTION('',(0.0,0.0,-1.0));
+#222=DIRECTION('',(-1.0,0.0,0.0));
+#223=AXIS2_PLACEMENT_3D('',#220,#221,#222);
+#224=CIRCLE('',#223,6.000000000000001);
+#225=EDGE_CURVE('',#219,#211,#224,.T.);
+#226=ORIENTED_EDGE('',*,*,#225,.F.);
+#227=CARTESIAN_POINT('',(0.0,-4.0,0.0));
+#228=DIRECTION('',(-1.0,0.0,0.0));
+#229=VECTOR('',#228,4.47213595499958);
+#230=LINE('',#227,#229);
+#231=EDGE_CURVE('',#164,#219,#230,.T.);
+#232=ORIENTED_EDGE('',*,*,#231,.F.);
+#233=EDGE_LOOP('',(#209,#217,#226,#232));
+#234=FACE_OUTER_BOUND('',#233,.T.);
+#235=ADVANCED_FACE('',(#234),#202,.T.);
+#236=CARTESIAN_POINT('',(4.47213595499958,4.0,0.0));
+#237=DIRECTION('',(0.0,1.0,0.0));
+#238=DIRECTION('',(0.0,0.0,1.0));
+#239=AXIS2_PLACEMENT_3D('',#236,#237,#238);
+#240=PLANE('',#239);
+#241=CARTESIAN_POINT('',(4.47213595499958,4.0,-2.0));
+#242=VERTEX_POINT('',#241);
+#243=CARTESIAN_POINT('',(-4.47213595499958,4.0,-2.0));
+#244=VERTEX_POINT('',#243);
+#245=CARTESIAN_POINT('',(4.47213595499958,4.0,-2.0));
+#246=DIRECTION('',(-1.0,0.0,0.0));
+#247=VECTOR('',#246,8.944271909999159);
+#248=LINE('',#245,#247);
+#249=EDGE_CURVE('',#242,#244,#248,.T.);
+#250=ORIENTED_EDGE('',*,*,#249,.T.);
+#251=CARTESIAN_POINT('',(-4.47213595499958,4.0,0.0));
+#252=DIRECTION('',(0.0,0.0,-1.0));
+#253=VECTOR('',#252,2.0);
+#254=LINE('',#251,#253);
+#255=EDGE_CURVE('',#211,#244,#254,.T.);
+#256=ORIENTED_EDGE('',*,*,#255,.F.);
+#257=ORIENTED_EDGE('',*,*,#216,.T.);
+#258=ORIENTED_EDGE('',*,*,#193,.T.);
+#259=CARTESIAN_POINT('',(4.47213595499958,4.0,0.0));
+#260=DIRECTION('',(0.0,0.0,-1.0));
+#261=VECTOR('',#260,2.0);
+#262=LINE('',#259,#261);
+#263=EDGE_CURVE('',#181,#242,#262,.T.);
+#264=ORIENTED_EDGE('',*,*,#263,.T.);
+#265=EDGE_LOOP('',(#250,#256,#257,#258,#264));
+#266=FACE_OUTER_BOUND('',#265,.T.);
+#267=ADVANCED_FACE('',(#266),#240,.T.);
+#268=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#269=DIRECTION('',(0.0,0.0,-1.0));
+#270=DIRECTION('',(-1.0,0.0,0.0));
+#271=AXIS2_PLACEMENT_3D('',#268,#269,#270);
+#272=CYLINDRICAL_SURFACE('',#271,6.000000000000001);
+#273=CARTESIAN_POINT('',(-4.47213595499958,-4.0,-2.0));
+#274=VERTEX_POINT('',#273);
+#275=CARTESIAN_POINT('',(0.0,0.0,-2.0));
+#276=DIRECTION('',(0.0,0.0,1.0));
+#277=DIRECTION('',(-1.0,0.0,0.0));
+#278=AXIS2_PLACEMENT_3D('',#275,#276,#277);
+#279=CIRCLE('',#278,6.000000000000001);
+#280=EDGE_CURVE('',#244,#274,#279,.T.);
+#281=ORIENTED_EDGE('',*,*,#280,.T.);
+#282=CARTESIAN_POINT('',(-4.47213595499958,-4.0,0.0));
+#283=DIRECTION('',(0.0,0.0,-1.0));
+#284=VECTOR('',#283,2.0);
+#285=LINE('',#282,#284);
+#286=EDGE_CURVE('',#219,#274,#285,.T.);
+#287=ORIENTED_EDGE('',*,*,#286,.F.);
+#288=ORIENTED_EDGE('',*,*,#225,.T.);
+#289=ORIENTED_EDGE('',*,*,#255,.T.);
+#290=EDGE_LOOP('',(#281,#287,#288,#289));
+#291=FACE_OUTER_BOUND('',#290,.T.);
+#292=ADVANCED_FACE('',(#291),#272,.T.);
+#293=CARTESIAN_POINT('',(-4.47213595499958,-4.0,0.0));
+#294=DIRECTION('',(0.0,-1.0,0.0));
+#295=DIRECTION('',(0.0,0.0,-1.0));
+#296=AXIS2_PLACEMENT_3D('',#293,#294,#295);
+#297=PLANE('',#296);
+#298=CARTESIAN_POINT('',(4.47213595499958,-4.0,-2.0));
+#299=VERTEX_POINT('',#298);
+#300=CARTESIAN_POINT('',(-4.47213595499958,-4.0,-2.0));
+#301=DIRECTION('',(1.0,0.0,0.0));
+#302=VECTOR('',#301,8.944271909999159);
+#303=LINE('',#300,#302);
+#304=EDGE_CURVE('',#274,#299,#303,.T.);
+#305=ORIENTED_EDGE('',*,*,#304,.T.);
+#306=CARTESIAN_POINT('',(4.47213595499958,-4.0,0.0));
+#307=DIRECTION('',(0.0,0.0,-1.0));
+#308=VECTOR('',#307,2.0);
+#309=LINE('',#306,#308);
+#310=EDGE_CURVE('',#173,#299,#309,.T.);
+#311=ORIENTED_EDGE('',*,*,#310,.F.);
+#312=ORIENTED_EDGE('',*,*,#178,.T.);
+#313=ORIENTED_EDGE('',*,*,#231,.T.);
+#314=ORIENTED_EDGE('',*,*,#286,.T.);
+#315=EDGE_LOOP('',(#305,#311,#312,#313,#314));
+#316=FACE_OUTER_BOUND('',#315,.T.);
+#317=ADVANCED_FACE('',(#316),#297,.T.);
+#318=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#319=DIRECTION('',(0.0,0.0,-1.0));
+#320=DIRECTION('',(-1.0,0.0,0.0));
+#321=AXIS2_PLACEMENT_3D('',#318,#319,#320);
+#322=CYLINDRICAL_SURFACE('',#321,6.000000000000001);
+#323=CARTESIAN_POINT('',(0.0,0.0,-2.0));
+#324=DIRECTION('',(0.0,0.0,1.0));
+#325=DIRECTION('',(-1.0,0.0,0.0));
+#326=AXIS2_PLACEMENT_3D('',#323,#324,#325);
+#327=CIRCLE('',#326,6.000000000000001);
+#328=EDGE_CURVE('',#299,#242,#327,.T.);
+#329=ORIENTED_EDGE('',*,*,#328,.T.);
+#330=ORIENTED_EDGE('',*,*,#263,.F.);
+#331=ORIENTED_EDGE('',*,*,#187,.T.);
+#332=ORIENTED_EDGE('',*,*,#310,.T.);
+#333=EDGE_LOOP('',(#329,#330,#331,#332));
+#334=FACE_OUTER_BOUND('',#333,.T.);
+#335=ADVANCED_FACE('',(#334),#322,.T.);
+#336=CARTESIAN_POINT('',(-2.010567E-016,1.387779E-016,-2.0));
+#337=DIRECTION('',(0.0,0.0,1.0));
+#338=DIRECTION('',(1.0,0.0,0.0));
+#339=AXIS2_PLACEMENT_3D('',#336,#337,#338);
+#340=PLANE('',#339);
+#341=ORIENTED_EDGE('',*,*,#249,.F.);
+#342=ORIENTED_EDGE('',*,*,#328,.F.);
+#343=ORIENTED_EDGE('',*,*,#304,.F.);
+#344=ORIENTED_EDGE('',*,*,#280,.F.);
+#345=EDGE_LOOP('',(#341,#342,#343,#344));
+#346=FACE_OUTER_BOUND('',#345,.T.);
+#347=ADVANCED_FACE('',(#346),#340,.F.);
+#348=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#349=DIRECTION('',(0.0,0.0,1.0));
+#350=DIRECTION('',(-1.0,0.0,0.0));
+#351=AXIS2_PLACEMENT_3D('',#348,#349,#350);
+#352=CYLINDRICAL_SURFACE('',#351,4.0);
+#353=CARTESIAN_POINT('',(4.0,4.898587E-016,33.0));
+#354=VERTEX_POINT('',#353);
+#355=CARTESIAN_POINT('',(0.0,0.0,33.0));
+#356=DIRECTION('',(0.0,0.0,-1.0));
+#357=DIRECTION('',(-1.0,0.0,0.0));
+#358=AXIS2_PLACEMENT_3D('',#355,#356,#357);
+#359=CIRCLE('',#358,4.0);
+#360=EDGE_CURVE('',#354,#354,#359,.T.);
+#361=ORIENTED_EDGE('',*,*,#360,.T.);
+#362=EDGE_LOOP('',(#361));
+#363=FACE_OUTER_BOUND('',#362,.T.);
+#364=ORIENTED_EDGE('',*,*,#110,.T.);
+#365=EDGE_LOOP('',(#364));
+#366=FACE_BOUND('',#365,.T.);
+#367=ORIENTED_EDGE('',*,*,#151,.T.);
+#368=EDGE_LOOP('',(#367));
+#369=FACE_BOUND('',#368,.T.);
+#370=ORIENTED_EDGE('',*,*,#170,.F.);
+#371=ORIENTED_EDGE('',*,*,#208,.F.);
+#372=EDGE_LOOP('',(#370,#371));
+#373=FACE_BOUND('',#372,.T.);
+#374=ADVANCED_FACE('',(#363,#366,#369,#373),#352,.T.);
+#375=CARTESIAN_POINT('',(0.0,0.0,33.0));
+#376=DIRECTION('',(0.0,0.0,-1.0));
+#377=DIRECTION('',(-1.0,0.0,0.0));
+#378=AXIS2_PLACEMENT_3D('',#375,#376,#377);
+#379=PLANE('',#378);
+#380=ORIENTED_EDGE('',*,*,#360,.F.);
+#381=EDGE_LOOP('',(#380));
+#382=FACE_OUTER_BOUND('',#381,.T.);
+#383=ADVANCED_FACE('',(#382),#379,.F.);
+#384=CLOSED_SHELL('',(#155,#197,#235,#267,#292,#317,#335,#347,#374,#383));
+#385=MANIFOLD_SOLID_BREP('Solid1',#384);
+#386=COLOUR_RGB('Black Asphalt',0.639216005802155,0.639216005802155,0.639216005802155);
+#387=FILL_AREA_STYLE_COLOUR('Black Asphalt',#386);
+#388=FILL_AREA_STYLE('Black Asphalt',(#387));
+#389=SURFACE_STYLE_FILL_AREA(#388);
+#390=SURFACE_SIDE_STYLE('Black Asphalt',(#389));
+#391=SURFACE_STYLE_USAGE(.BOTH.,#390);
+#392=PRESENTATION_STYLE_ASSIGNMENT((#391));
+#393=STYLED_ITEM('',(#392),#385);
+#394=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#393),#36);
+#395=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#385),#36);
+#396=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#395,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/STEP/PM522INSERTChamberInsert2.stp

@@ -0,0 +1,138 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM522\\STEP2.0\\PM522INSERTChamberInsert2.stp','2015-10-01T18:19:14',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM522INSERTChamberInsert2','PM522INSERTChamberInsert2',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#69=DIRECTION('',(0.0,0.0,1.0));
+#70=DIRECTION('',(-1.0,0.0,0.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=CYLINDRICAL_SURFACE('',#71,2.8575);
+#73=CARTESIAN_POINT('',(2.8575,3.499428E-016,34.0));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(0.0,0.0,34.0));
+#76=DIRECTION('',(0.0,0.0,-1.0));
+#77=DIRECTION('',(-1.0,0.0,0.0));
+#78=AXIS2_PLACEMENT_3D('',#75,#76,#77);
+#79=CIRCLE('',#78,2.8575);
+#80=EDGE_CURVE('',#74,#74,#79,.T.);
+#81=ORIENTED_EDGE('',*,*,#80,.F.);
+#82=EDGE_LOOP('',(#81));
+#83=FACE_OUTER_BOUND('',#82,.T.);
+#84=CARTESIAN_POINT('',(2.8575,3.499428E-016,0.0));
+#85=VERTEX_POINT('',#84);
+#86=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#87=DIRECTION('',(0.0,0.0,1.0));
+#88=DIRECTION('',(-1.0,0.0,0.0));
+#89=AXIS2_PLACEMENT_3D('',#86,#87,#88);
+#90=CIRCLE('',#89,2.8575);
+#91=EDGE_CURVE('',#85,#85,#90,.T.);
+#92=ORIENTED_EDGE('',*,*,#91,.F.);
+#93=EDGE_LOOP('',(#92));
+#94=FACE_BOUND('',#93,.T.);
+#95=ADVANCED_FACE('',(#83,#94),#72,.F.);
+#96=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#97=DIRECTION('',(0.0,0.0,1.0));
+#98=DIRECTION('',(-1.0,0.0,0.0));
+#99=AXIS2_PLACEMENT_3D('',#96,#97,#98);
+#100=CYLINDRICAL_SURFACE('',#99,3.571875);
+#101=CARTESIAN_POINT('',(3.571875,4.374285E-016,34.0));
+#102=VERTEX_POINT('',#101);
+#103=CARTESIAN_POINT('',(0.0,0.0,34.0));
+#104=DIRECTION('',(0.0,0.0,-1.0));
+#105=DIRECTION('',(-1.0,0.0,0.0));
+#106=AXIS2_PLACEMENT_3D('',#103,#104,#105);
+#107=CIRCLE('',#106,3.571875);
+#108=EDGE_CURVE('',#102,#102,#107,.T.);
+#109=ORIENTED_EDGE('',*,*,#108,.T.);
+#110=EDGE_LOOP('',(#109));
+#111=FACE_OUTER_BOUND('',#110,.T.);
+#112=CARTESIAN_POINT('',(3.571875,4.374285E-016,0.0));
+#113=VERTEX_POINT('',#112);
+#114=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#115=DIRECTION('',(0.0,0.0,-1.0));
+#116=DIRECTION('',(-1.0,0.0,0.0));
+#117=AXIS2_PLACEMENT_3D('',#114,#115,#116);
+#118=CIRCLE('',#117,3.571875);
+#119=EDGE_CURVE('',#113,#113,#118,.T.);
+#120=ORIENTED_EDGE('',*,*,#119,.F.);
+#121=EDGE_LOOP('',(#120));
+#122=FACE_BOUND('',#121,.T.);
+#123=ADVANCED_FACE('',(#111,#122),#100,.T.);
+#124=CARTESIAN_POINT('',(0.0,0.0,34.0));
+#125=DIRECTION('',(0.0,0.0,-1.0));
+#126=DIRECTION('',(-1.0,0.0,0.0));
+#127=AXIS2_PLACEMENT_3D('',#124,#125,#126);
+#128=PLANE('',#127);
+#129=ORIENTED_EDGE('',*,*,#108,.F.);
+#130=EDGE_LOOP('',(#129));
+#131=FACE_OUTER_BOUND('',#130,.T.);
+#132=ORIENTED_EDGE('',*,*,#80,.T.);
+#133=EDGE_LOOP('',(#132));
+#134=FACE_BOUND('',#133,.T.);
+#135=ADVANCED_FACE('',(#131,#134),#128,.F.);
+#136=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#137=DIRECTION('',(0.0,0.0,-1.0));
+#138=DIRECTION('',(-1.0,0.0,0.0));
+#139=AXIS2_PLACEMENT_3D('',#136,#137,#138);
+#140=PLANE('',#139);
+#141=ORIENTED_EDGE('',*,*,#119,.T.);
+#142=EDGE_LOOP('',(#141));
+#143=FACE_OUTER_BOUND('',#142,.T.);
+#144=ORIENTED_EDGE('',*,*,#91,.T.);
+#145=EDGE_LOOP('',(#144));
+#146=FACE_BOUND('',#145,.T.);
+#147=ADVANCED_FACE('',(#143,#146),#140,.T.);
+#148=CLOSED_SHELL('',(#95,#123,#135,#147));
+#149=MANIFOLD_SOLID_BREP('Solid1',#148);
+#150=COLOUR_RGB('Black Chrome',0.752941012382507,0.752941012382507,0.752941012382507);
+#151=FILL_AREA_STYLE_COLOUR('Black Chrome',#150);
+#152=FILL_AREA_STYLE('Black Chrome',(#151));
+#153=SURFACE_STYLE_FILL_AREA(#152);
+#154=SURFACE_SIDE_STYLE('Black Chrome',(#153));
+#155=SURFACE_STYLE_USAGE(.BOTH.,#154);
+#156=PRESENTATION_STYLE_ASSIGNMENT((#155));
+#157=STYLED_ITEM('',(#156),#149);
+#158=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#157),#36);
+#159=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#149),#36);
+#160=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#159,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/STEP/PM522SearPin2.stp

@@ -0,0 +1,228 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM522\\STEP2.0\\PM522SearPin2.stp','2015-10-01T18:17:18',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM522SearPin2','PM522SearPin2',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(-1.0,0.0,0.0));
+#69=DIRECTION('',(-1.0,0.0,0.0));
+#70=DIRECTION('',(0.0,0.0,1.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=PLANE('',#71);
+#73=CARTESIAN_POINT('',(-1.0,0.0,3.0));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(-1.0,0.0,-3.0));
+#76=VERTEX_POINT('',#75);
+#77=CARTESIAN_POINT('',(-1.0,0.0,0.0));
+#78=DIRECTION('',(-1.0,0.0,0.0));
+#79=DIRECTION('',(0.0,-1.0,0.0));
+#80=AXIS2_PLACEMENT_3D('',#77,#78,#79);
+#81=CIRCLE('',#80,3.0);
+#82=EDGE_CURVE('',#74,#76,#81,.T.);
+#83=ORIENTED_EDGE('',*,*,#82,.F.);
+#84=CARTESIAN_POINT('',(-1.0,7.000000000000001,3.0));
+#85=VERTEX_POINT('',#84);
+#86=CARTESIAN_POINT('',(-1.0,7.000000000000001,3.0));
+#87=DIRECTION('',(0.0,-1.0,0.0));
+#88=VECTOR('',#87,7.000000000000001);
+#89=LINE('',#86,#88);
+#90=EDGE_CURVE('',#85,#74,#89,.T.);
+#91=ORIENTED_EDGE('',*,*,#90,.F.);
+#92=CARTESIAN_POINT('',(-1.0,7.000000000000001,-3.0));
+#93=VERTEX_POINT('',#92);
+#94=CARTESIAN_POINT('',(-1.0,7.000000000000001,-3.0));
+#95=DIRECTION('',(0.0,0.0,1.0));
+#96=VECTOR('',#95,6.000000000000001);
+#97=LINE('',#94,#96);
+#98=EDGE_CURVE('',#93,#85,#97,.T.);
+#99=ORIENTED_EDGE('',*,*,#98,.F.);
+#100=CARTESIAN_POINT('',(-1.0,0.0,-3.0));
+#101=DIRECTION('',(0.0,1.0,0.0));
+#102=VECTOR('',#101,7.000000000000001);
+#103=LINE('',#100,#102);
+#104=EDGE_CURVE('',#76,#93,#103,.T.);
+#105=ORIENTED_EDGE('',*,*,#104,.F.);
+#106=EDGE_LOOP('',(#83,#91,#99,#105));
+#107=FACE_OUTER_BOUND('',#106,.T.);
+#108=ADVANCED_FACE('',(#107),#72,.T.);
+#109=CARTESIAN_POINT('',(0.0,0.0,-3.0));
+#110=DIRECTION('',(0.0,0.0,-1.0));
+#111=DIRECTION('',(-1.0,0.0,0.0));
+#112=AXIS2_PLACEMENT_3D('',#109,#110,#111);
+#113=PLANE('',#112);
+#114=ORIENTED_EDGE('',*,*,#104,.T.);
+#115=CARTESIAN_POINT('',(0.0,7.000000000000001,-3.0));
+#116=VERTEX_POINT('',#115);
+#117=CARTESIAN_POINT('',(0.0,7.000000000000001,-3.0));
+#118=DIRECTION('',(-1.0,0.0,0.0));
+#119=VECTOR('',#118,1.0);
+#120=LINE('',#117,#119);
+#121=EDGE_CURVE('',#116,#93,#120,.T.);
+#122=ORIENTED_EDGE('',*,*,#121,.F.);
+#123=CARTESIAN_POINT('',(0.0,0.0,-3.0));
+#124=VERTEX_POINT('',#123);
+#125=CARTESIAN_POINT('',(0.0,7.000000000000001,-3.0));
+#126=DIRECTION('',(0.0,-1.0,0.0));
+#127=VECTOR('',#126,7.000000000000001);
+#128=LINE('',#125,#127);
+#129=EDGE_CURVE('',#116,#124,#128,.T.);
+#130=ORIENTED_EDGE('',*,*,#129,.T.);
+#131=CARTESIAN_POINT('',(0.0,2.379049E-016,-3.0));
+#132=DIRECTION('',(-1.0,0.0,0.0));
+#133=VECTOR('',#132,1.0);
+#134=LINE('',#131,#133);
+#135=EDGE_CURVE('',#124,#76,#134,.T.);
+#136=ORIENTED_EDGE('',*,*,#135,.T.);
+#137=EDGE_LOOP('',(#114,#122,#130,#136));
+#138=FACE_OUTER_BOUND('',#137,.T.);
+#139=ADVANCED_FACE('',(#138),#113,.T.);
+#140=CARTESIAN_POINT('',(0.0,7.000000000000001,-3.0));
+#141=DIRECTION('',(0.0,1.0,0.0));
+#142=DIRECTION('',(0.0,0.0,1.0));
+#143=AXIS2_PLACEMENT_3D('',#140,#141,#142);
+#144=PLANE('',#143);
+#145=ORIENTED_EDGE('',*,*,#98,.T.);
+#146=CARTESIAN_POINT('',(0.0,7.000000000000001,3.0));
+#147=VERTEX_POINT('',#146);
+#148=CARTESIAN_POINT('',(0.0,7.000000000000001,3.0));
+#149=DIRECTION('',(-1.0,0.0,0.0));
+#150=VECTOR('',#149,1.0);
+#151=LINE('',#148,#150);
+#152=EDGE_CURVE('',#147,#85,#151,.T.);
+#153=ORIENTED_EDGE('',*,*,#152,.F.);
+#154=CARTESIAN_POINT('',(0.0,7.000000000000001,3.0));
+#155=DIRECTION('',(0.0,0.0,-1.0));
+#156=VECTOR('',#155,6.000000000000001);
+#157=LINE('',#154,#156);
+#158=EDGE_CURVE('',#147,#116,#157,.T.);
+#159=ORIENTED_EDGE('',*,*,#158,.T.);
+#160=ORIENTED_EDGE('',*,*,#121,.T.);
+#161=EDGE_LOOP('',(#145,#153,#159,#160));
+#162=FACE_OUTER_BOUND('',#161,.T.);
+#163=ADVANCED_FACE('',(#162),#144,.T.);
+#164=CARTESIAN_POINT('',(0.0,7.000000000000001,3.0));
+#165=DIRECTION('',(0.0,0.0,1.0));
+#166=DIRECTION('',(1.0,0.0,0.0));
+#167=AXIS2_PLACEMENT_3D('',#164,#165,#166);
+#168=PLANE('',#167);
+#169=ORIENTED_EDGE('',*,*,#90,.T.);
+#170=CARTESIAN_POINT('',(0.0,0.0,3.0));
+#171=VERTEX_POINT('',#170);
+#172=CARTESIAN_POINT('',(0.0,0.0,3.0));
+#173=DIRECTION('',(-1.0,0.0,0.0));
+#174=VECTOR('',#173,1.0);
+#175=LINE('',#172,#174);
+#176=EDGE_CURVE('',#171,#74,#175,.T.);
+#177=ORIENTED_EDGE('',*,*,#176,.F.);
+#178=CARTESIAN_POINT('',(0.0,0.0,3.0));
+#179=DIRECTION('',(0.0,1.0,0.0));
+#180=VECTOR('',#179,7.000000000000001);
+#181=LINE('',#178,#180);
+#182=EDGE_CURVE('',#171,#147,#181,.T.);
+#183=ORIENTED_EDGE('',*,*,#182,.T.);
+#184=ORIENTED_EDGE('',*,*,#152,.T.);
+#185=EDGE_LOOP('',(#169,#177,#183,#184));
+#186=FACE_OUTER_BOUND('',#185,.T.);
+#187=ADVANCED_FACE('',(#186),#168,.T.);
+#188=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#189=DIRECTION('',(-1.0,0.0,0.0));
+#190=DIRECTION('',(0.0,-1.0,0.0));
+#191=AXIS2_PLACEMENT_3D('',#188,#189,#190);
+#192=CYLINDRICAL_SURFACE('',#191,3.0);
+#193=ORIENTED_EDGE('',*,*,#82,.T.);
+#194=ORIENTED_EDGE('',*,*,#135,.F.);
+#195=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#196=DIRECTION('',(-1.0,0.0,0.0));
+#197=DIRECTION('',(0.0,-1.0,0.0));
+#198=AXIS2_PLACEMENT_3D('',#195,#196,#197);
+#199=CIRCLE('',#198,3.0);
+#200=EDGE_CURVE('',#124,#171,#199,.T.);
+#201=ORIENTED_EDGE('',*,*,#200,.T.);
+#202=ORIENTED_EDGE('',*,*,#176,.T.);
+#203=EDGE_LOOP('',(#193,#194,#201,#202));
+#204=FACE_OUTER_BOUND('',#203,.T.);
+#205=CARTESIAN_POINT('',(-11.900000000000002,3.0,3.673940E-016));
+#206=VERTEX_POINT('',#205);
+#207=CARTESIAN_POINT('',(-11.900000000000002,0.0,0.0));
+#208=DIRECTION('',(1.0,0.0,0.0));
+#209=DIRECTION('',(0.0,-1.0,0.0));
+#210=AXIS2_PLACEMENT_3D('',#207,#208,#209);
+#211=CIRCLE('',#210,3.0);
+#212=EDGE_CURVE('',#206,#206,#211,.T.);
+#213=ORIENTED_EDGE('',*,*,#212,.T.);
+#214=EDGE_LOOP('',(#213));
+#215=FACE_BOUND('',#214,.T.);
+#216=ADVANCED_FACE('',(#204,#215),#192,.T.);
+#217=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#218=DIRECTION('',(-1.0,0.0,0.0));
+#219=DIRECTION('',(0.0,0.0,1.0));
+#220=AXIS2_PLACEMENT_3D('',#217,#218,#219);
+#221=PLANE('',#220);
+#222=ORIENTED_EDGE('',*,*,#129,.F.);
+#223=ORIENTED_EDGE('',*,*,#158,.F.);
+#224=ORIENTED_EDGE('',*,*,#182,.F.);
+#225=ORIENTED_EDGE('',*,*,#200,.F.);
+#226=EDGE_LOOP('',(#222,#223,#224,#225));
+#227=FACE_OUTER_BOUND('',#226,.T.);
+#228=ADVANCED_FACE('',(#227),#221,.F.);
+#229=CARTESIAN_POINT('',(-11.900000000000002,0.0,0.0));
+#230=DIRECTION('',(-1.0,0.0,0.0));
+#231=DIRECTION('',(0.0,0.0,1.0));
+#232=AXIS2_PLACEMENT_3D('',#229,#230,#231);
+#233=PLANE('',#232);
+#234=ORIENTED_EDGE('',*,*,#212,.F.);
+#235=EDGE_LOOP('',(#234));
+#236=FACE_OUTER_BOUND('',#235,.T.);
+#237=ADVANCED_FACE('',(#236),#233,.T.);
+#238=CLOSED_SHELL('',(#108,#139,#163,#187,#216,#228,#237));
+#239=MANIFOLD_SOLID_BREP('Solid1',#238);
+#240=COLOUR_RGB('Black Asphalt',0.639216005802155,0.639216005802155,0.639216005802155);
+#241=FILL_AREA_STYLE_COLOUR('Black Asphalt',#240);
+#242=FILL_AREA_STYLE('Black Asphalt',(#241));
+#243=SURFACE_STYLE_FILL_AREA(#242);
+#244=SURFACE_SIDE_STYLE('Black Asphalt',(#243));
+#245=SURFACE_STYLE_USAGE(.BOTH.,#244);
+#246=PRESENTATION_STYLE_ASSIGNMENT((#245));
+#247=STYLED_ITEM('',(#246),#239);
+#248=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#247),#36);
+#249=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#239),#36);
+#250=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#249,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/STEP/PM522TriggerBandRetainer2.stp

@@ -0,0 +1,184 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM522\\STEP2.0\\PM522TriggerBandRetainer2.stp','2015-10-01T18:17:10',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM522TriggerBandRetainer2','PM522TriggerBandRetainer2',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(0.9,0.0,0.0));
+#69=DIRECTION('',(1.0,0.0,0.0));
+#70=DIRECTION('',(0.0,1.0,0.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=TOROIDAL_SURFACE('',#71,4.0,2.0);
+#73=CARTESIAN_POINT('',(2.5,2.8,3.429011E-016));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(2.5,0.0,0.0));
+#76=DIRECTION('',(1.0,0.0,0.0));
+#77=DIRECTION('',(0.0,-1.0,0.0));
+#78=AXIS2_PLACEMENT_3D('',#75,#76,#77);
+#79=CIRCLE('',#78,2.8);
+#80=EDGE_CURVE('',#74,#74,#79,.T.);
+#81=ORIENTED_EDGE('',*,*,#80,.F.);
+#82=EDGE_LOOP('',(#81));
+#83=FACE_OUTER_BOUND('',#82,.T.);
+#84=CARTESIAN_POINT('',(0.9,-2.0,-2.449294E-016));
+#85=VERTEX_POINT('',#84);
+#86=CARTESIAN_POINT('',(0.9,0.0,0.0));
+#87=DIRECTION('',(1.0,0.0,0.0));
+#88=DIRECTION('',(0.0,1.0,0.0));
+#89=AXIS2_PLACEMENT_3D('',#86,#87,#88);
+#90=CIRCLE('',#89,2.0);
+#91=EDGE_CURVE('',#85,#85,#90,.T.);
+#92=ORIENTED_EDGE('',*,*,#91,.T.);
+#93=EDGE_LOOP('',(#92));
+#94=FACE_BOUND('',#93,.T.);
+#95=ADVANCED_FACE('',(#83,#94),#72,.F.);
+#96=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#97=DIRECTION('',(1.0,0.0,0.0));
+#98=DIRECTION('',(0.0,-1.0,0.0));
+#99=AXIS2_PLACEMENT_3D('',#96,#97,#98);
+#100=CYLINDRICAL_SURFACE('',#99,2.0);
+#101=CARTESIAN_POINT('',(-0.9,-2.0,2.449294E-016));
+#102=VERTEX_POINT('',#101);
+#103=CARTESIAN_POINT('',(-0.9,0.0,0.0));
+#104=DIRECTION('',(-1.0,0.0,0.0));
+#105=DIRECTION('',(0.0,1.0,0.0));
+#106=AXIS2_PLACEMENT_3D('',#103,#104,#105);
+#107=CIRCLE('',#106,2.0);
+#108=EDGE_CURVE('',#102,#102,#107,.T.);
+#109=ORIENTED_EDGE('',*,*,#108,.F.);
+#110=EDGE_LOOP('',(#109));
+#111=FACE_OUTER_BOUND('',#110,.T.);
+#112=ORIENTED_EDGE('',*,*,#91,.F.);
+#113=EDGE_LOOP('',(#112));
+#114=FACE_BOUND('',#113,.T.);
+#115=ADVANCED_FACE('',(#111,#114),#100,.T.);
+#116=CARTESIAN_POINT('',(-0.9,0.0,0.0));
+#117=DIRECTION('',(-1.0,0.0,0.0));
+#118=DIRECTION('',(0.0,1.0,0.0));
+#119=AXIS2_PLACEMENT_3D('',#116,#117,#118);
+#120=TOROIDAL_SURFACE('',#119,4.0,2.0);
+#121=CARTESIAN_POINT('',(-2.5,2.8,3.429011E-016));
+#122=VERTEX_POINT('',#121);
+#123=CARTESIAN_POINT('',(-2.5,0.0,0.0));
+#124=DIRECTION('',(-1.0,0.0,0.0));
+#125=DIRECTION('',(0.0,-1.0,0.0));
+#126=AXIS2_PLACEMENT_3D('',#123,#124,#125);
+#127=CIRCLE('',#126,2.8);
+#128=EDGE_CURVE('',#122,#122,#127,.T.);
+#129=ORIENTED_EDGE('',*,*,#128,.F.);
+#130=EDGE_LOOP('',(#129));
+#131=FACE_OUTER_BOUND('',#130,.T.);
+#132=ORIENTED_EDGE('',*,*,#108,.T.);
+#133=EDGE_LOOP('',(#132));
+#134=FACE_BOUND('',#133,.T.);
+#135=ADVANCED_FACE('',(#131,#134),#120,.F.);
+#136=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#137=DIRECTION('',(1.0,0.0,0.0));
+#138=DIRECTION('',(0.0,-1.0,0.0));
+#139=AXIS2_PLACEMENT_3D('',#136,#137,#138);
+#140=CYLINDRICAL_SURFACE('',#139,2.8);
+#141=CARTESIAN_POINT('',(4.8,2.8,3.429011E-016));
+#142=VERTEX_POINT('',#141);
+#143=CARTESIAN_POINT('',(4.8,0.0,0.0));
+#144=DIRECTION('',(-1.0,0.0,0.0));
+#145=DIRECTION('',(0.0,-1.0,0.0));
+#146=AXIS2_PLACEMENT_3D('',#143,#144,#145);
+#147=CIRCLE('',#146,2.8);
+#148=EDGE_CURVE('',#142,#142,#147,.T.);
+#149=ORIENTED_EDGE('',*,*,#148,.T.);
+#150=EDGE_LOOP('',(#149));
+#151=FACE_OUTER_BOUND('',#150,.T.);
+#152=ORIENTED_EDGE('',*,*,#80,.T.);
+#153=EDGE_LOOP('',(#152));
+#154=FACE_BOUND('',#153,.T.);
+#155=ADVANCED_FACE('',(#151,#154),#140,.T.);
+#156=CARTESIAN_POINT('',(-4.8,0.0,0.0));
+#157=DIRECTION('',(-1.0,0.0,0.0));
+#158=DIRECTION('',(0.0,0.0,1.0));
+#159=AXIS2_PLACEMENT_3D('',#156,#157,#158);
+#160=PLANE('',#159);
+#161=CARTESIAN_POINT('',(-4.8,2.8,3.429011E-016));
+#162=VERTEX_POINT('',#161);
+#163=CARTESIAN_POINT('',(-4.8,0.0,0.0));
+#164=DIRECTION('',(1.0,0.0,0.0));
+#165=DIRECTION('',(0.0,-1.0,0.0));
+#166=AXIS2_PLACEMENT_3D('',#163,#164,#165);
+#167=CIRCLE('',#166,2.8);
+#168=EDGE_CURVE('',#162,#162,#167,.T.);
+#169=ORIENTED_EDGE('',*,*,#168,.F.);
+#170=EDGE_LOOP('',(#169));
+#171=FACE_OUTER_BOUND('',#170,.T.);
+#172=ADVANCED_FACE('',(#171),#160,.T.);
+#173=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#174=DIRECTION('',(1.0,0.0,0.0));
+#175=DIRECTION('',(0.0,-1.0,0.0));
+#176=AXIS2_PLACEMENT_3D('',#173,#174,#175);
+#177=CYLINDRICAL_SURFACE('',#176,2.8);
+#178=ORIENTED_EDGE('',*,*,#128,.T.);
+#179=EDGE_LOOP('',(#178));
+#180=FACE_OUTER_BOUND('',#179,.T.);
+#181=ORIENTED_EDGE('',*,*,#168,.T.);
+#182=EDGE_LOOP('',(#181));
+#183=FACE_BOUND('',#182,.T.);
+#184=ADVANCED_FACE('',(#180,#183),#177,.T.);
+#185=CARTESIAN_POINT('',(4.8,0.0,0.0));
+#186=DIRECTION('',(-1.0,0.0,0.0));
+#187=DIRECTION('',(0.0,0.0,1.0));
+#188=AXIS2_PLACEMENT_3D('',#185,#186,#187);
+#189=PLANE('',#188);
+#190=ORIENTED_EDGE('',*,*,#148,.F.);
+#191=EDGE_LOOP('',(#190));
+#192=FACE_OUTER_BOUND('',#191,.T.);
+#193=ADVANCED_FACE('',(#192),#189,.F.);
+#194=CLOSED_SHELL('',(#95,#115,#135,#155,#172,#184,#193));
+#195=MANIFOLD_SOLID_BREP('Solid1',#194);
+#196=DRAUGHTING_PRE_DEFINED_COLOUR('white');
+#197=FILL_AREA_STYLE_COLOUR('White',#196);
+#198=FILL_AREA_STYLE('White',(#197));
+#199=SURFACE_STYLE_FILL_AREA(#198);
+#200=SURFACE_SIDE_STYLE('White',(#199));
+#201=SURFACE_STYLE_USAGE(.BOTH.,#200);
+#202=PRESENTATION_STYLE_ASSIGNMENT((#201));
+#203=STYLED_ITEM('',(#202),#195);
+#204=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#203),#36);
+#205=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#195),#36);
+#206=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#205,#41);
+ENDSEC;
+END-ISO-10303-21;