Mirrors
/
fosscad-repo-frozen
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Updating Rifles/WarFairy_Charon_v3-Shanrilivan/README.md with information on Magazine Release Cover.

This commit is contained in:
ma duce 2013-11-28 20:01:34 -08:00
parent 4abf3ab65c
commit d83c14aa4a
1 changed files with 4 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
Rifles/WarFairy_Charon_v3-Shanrilivan/README.md
View File

@ -99,6 +99,10 @@ All parts are oriented for direct printing. I leave print options up to you and
#### Assembly Instructions
The guide nubs and divots on each part should steer you in the right direction as far as location. I highly recommend using a proper ABS Cement and allowing at least 24 hours after gluing before test firing. Ensure the Fire control pocket and buffer tubes are clear of any support material or significant deviations before assembly. Assemble 3 parts of Magwell first. Ensure bolt release slot and magazine release tube are well formed and free of obstruction. Apply grip to magwell. Assemble Stock Sections. Apply Stock to grip. Place buffer tube sections into respective areas on upper flat of stock and grip. Allow glue to set before test fire.
#### Magazine Release Cover
For California residents: Legality of this part is unknown, but should satisfy the law requiring a tool to release the magazine. Print as oriented, and glue in place over top of the magazine relase after it is installed, with the highest corner to the bottom and rear.
#### Warnings
THESE FILES ARE UNTESTED. PRINT AND FIRE AT YOUR OWN RISK. I assume no responsibilty.