From ed07b3b53502182474f77dd0390bd79ee5e4f043 Mon Sep 17 00:00:00 2001 From: ma duce Date: Mon, 16 Dec 2013 03:05:00 -0800 Subject: [PATCH] fixing typos. --- Rifles/AR-15_FOSSCAD_Trigger_Module_rev5-shadowfall/README.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Rifles/AR-15_FOSSCAD_Trigger_Module_rev5-shadowfall/README.md b/Rifles/AR-15_FOSSCAD_Trigger_Module_rev5-shadowfall/README.md index 26fc3cb..50a1042 100644 --- a/Rifles/AR-15_FOSSCAD_Trigger_Module_rev5-shadowfall/README.md +++ b/Rifles/AR-15_FOSSCAD_Trigger_Module_rev5-shadowfall/README.md @@ -1,4 +1,4 @@ -# FOSSCAD Trigger Module (rev5) +# FOSSCAD Trigger Module (rev 5) #### Author @@ -6,4 +6,4 @@ shadowfall #### Description -This is the FOSSCAD Triger Module revision 5, (see Renders/module_assembled-printed.jpg). The module provides a 3d drop in FCG for FOSSCAD compatible AR plateforms. it requires that you use a AR-15 parts kits. You can then assemble said parts into the module and install it into a FOSSCAD compatible lower receiver. The module requires a 3mm cross pin to hold it in place (see crosspin.stl) which can be printed, however, a metal cross pin is recommended. This pin should be as long as the outside of the receiver. +This is the FOSSCAD Triger Module revision 5 (see Renders/module_assembled-printed.jpg). The module provides a 3d drop in FCG for FOSSCAD compatible AR plateforms. it requires that you use a AR-15 parts kits. You can then assemble said parts into the module and install it into a FOSSCAD compatible lower receiver. The module requires a 3mm cross pin to hold it in place (see crosspin.stl) which can be printed, however, a metal cross pin is recommended. This pin should be as long as the outside of the receiver.