Adding Hanuman (aka Shanpup) AR-15 bullpup receiver by WarFairy.

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/README.md

@@ -0,0 +1,80 @@
+# WarFairy presents: The Hanuman, AR-15 Based Bullpup
+
+####WARNING
+This file set is meant as a proof of concept. It is a prototype. There is no safety. There is no guarantee it will not harm or kill its operator. There is no guarantee it is legal in your location in all configurations. OAL Guidelines are stated with Federal Law in mine for the USA. Check for Local Laws before printing ANY firearm.
+
+This design REQUIRES a bufferless AR-15 upper. Suitable platforms are the ARAK-21, Rock River Arms PDS Carbine, and CMMG Style .22LR Conversions for regular Upper Receivers. Use of 5.56/.223 with a standard BCG WILL result in catastrophic failure of the firearm, which could result in serious or fatal injury. I say again, DO NOT USE A STANDARD BCG IN THIS FIREARM.
+
+##### OAL, the NFA, and YOU
+If you are using an upper receiver with a 16" barrel, you must use the 3 Inch Buttpad Extension to meet the minimum legal OAL of 26". With a 16" barrel, the OAL of the platform is 26.25". If you are using an 18" barrel, you must use at least the 1" Buttpad Extension, bringing the OAL to 26.25". If you are using a 20" barrel, you may use the 1/4" buttpad extension without fear of breaking laws concerning SBR minimum overall lengths.
+
+
+####Printing Instructions
+USE ABS PLASTIC.
+
+All parts are oriented in optimum direction as far as I can determine, but it is left up to the experience and intuition of the print operator to decide. Support material is recommended to be on. Use settings that minimize warp and shrink, as well as maximizing accuracy and strength. Dimensions are CRITICAL.
+
+Support material is necessary for Receiver_Grip_2, Receiver_FCG_Right, Receiver_FCG_Left, Trigger_Carrier, and Mag_Release_Arm.
+
+Total weight of 12x receiver marked parts is 1.45 pounds, not including support material or auxilary parts.
+
+***Printed Part List***
+Print one of each file EXCEPT THE FOLLOWING.
+1x Buttpad_Extension of the proper length to make OAL 26" or greater.
+2x Trigger_Plate_Cover_Left
+2x Trigger_Plate_Cover_Right
+
+
+#### ASSEMBLY
+
+Use Receier_Parts.jpg to determine alignment of the 12 receiver parts. They are seperated into four distinct sections. Forward (3 Parts), Grip (3 Parts), Magwell (4 Parts), and FCG (2 Parts). Using a suitable ABS Cement, cement the four sections together, taking care to make the interfacing faces absolutely paralell. Reference Receiver_Assembled.jpg for what the final product should look like.
+
+Once glue is cured and straightness of iterfacing flats is assured, cement the four sections together as per Receiver_Assembled.jpg.
+
+GENTLY Sand down a SLIGHT bit in the center of the four pins to allow for movement of Trigger, Mag Release and Lifter. They have been deliberately left without tollerance for their holes or hinges to allow for different printer tollerances. All printed pins except the Takedown_Pin are 6mm diameter and may be replaced with a suitable wood, plastic, or metal alternative. This is left to the Printer to decide.
+
+Place trigger in center opening of Trigger carrier and place Trigger carrier pin through rear side hole, ensuring pin passes through slot of trigger. Place Trigger Carrier assembly through the top hole in the Grip_2 section of the receiver and then slide forward so that two rods on front of trigger carrier assembly engage the two holes in the front of the opening in the receiver.
+
+Place Trigger Hinge pin through hole above trigger face, passing through center hole of Trigger.
+
+Trigger should swing without resistance, moving Trigger carrier back and forth. If it does not swing freely, press trigger hinge pin out of receiver, and gently sand down the centers of the Trigger Hinge Pin before reassembly.
+
+Slide Lifter into rectangular hole in rear of FCG section, aligning the hole in the lifter with the hole above the slot with the triangular nose forward, flat face upwards and pin into place with Lifter_Pin. Check for free movement of lifter. If lifter does not swing with very little resistance or freely, press Lifter_Pin out and gently sand center until it does.
+
+Press Trigger_Rod_Right's two forward pins through the corresponding two holes in the Trigger carrier until the shaft of the Trigger rod rides flush in the trigger rod channel of the receiver, with the rear pin of the Rod entering the slot at the rear of the receiver, with the pin resting on the round bottom of the Lifter. Check for free movement. Gently sand upper and lower surfaces of the trigger channel on receiver if there is any binding.
+
+Press Trigger_Rod_Left onto left side of receiver, matching the holes in the rod to the pins of Trigger_Rod_Right. Check for free movement and sand channel until free movement possible.
+
+Install AR-15 FCG and check function. Do NOT allow hammer to fall at full strength onto the plastic receiver. Damage or breakage will occur. If you have checked the free movement of the printed trigger parts, the lifter will trip the trigger tail of the AR-15 FCG, resulting in the hammer falling, and the trigger return spring should press the printed parts forward enough to allow reset and refiring.
+
+If the trigger does not return, remove Trigger_Rod_Right and Trigger_Rod_Left as well as trigger hinge pin. Place the spring from a click pen into one of the holes in the front of the forward trigger hole. This will place positive pressure on the trigger carrier, allowing the trigger to return, but will increase the pull weight of the forward trigger. Experiment with the spring length until trigger is as light as possible, with positive return.
+
+Install Bolt Hold Open from AR-15 LPK if desired.
+
+Place shaft of Mag_Release_Arm into hole at the bottom of the triangular receptacle on left side of receiver above grip. Slotted tab slides in at top dead center and then is rotated counter clockwise to captive position.
+
+Place stud on Mag_Release_Bar into slot of slotted tab of Mag_Release Arm and press flush into Mag Release Arm Channel on receiver. Using thumb, check for free movement of Mag_Release_Arm and Mag_Release Bar. Sand Channel or shaft until freedom of movement is established.
+
+Press Mag_Release_Right onto Indexed Shaft of Mag_Release_Arm and press until end of shaft is flush with surface of Mag_Release_Right. Check for free movement.
+
+Place Mag Release Spring included with AR-15 LPK into hole just behind Mag Release Slot on left side of receiver.
+
+Pressing down on the rear arm of Mag_Release, compress spring until Mag_Catch_Pin can be inserted through upper ear, down through hole of Mag_Release and seated in bottom ear of the Mag Release ears.
+
+Check function of Mag Release by pressing forward on Mag Release Thumb Pad, rotating it counter clockwise until Mag_Release raises far enough to disengage a magazine
+
+When all functions have been checked, Place Mag_Release_Cover into appropriate holes on left side of receiver above Mag Release Thumb Pad.
+
+Press Trigger_Plate_Cover_Left onto appropriate holes at front and rear of receiver until flush and ensuring they do not interfere with operation. Do same with Trigger_Plate_Cover_Right.
+
+Press your chosen buttpad extension onto rear of receiver to complete firearm.
+
+
+#### END NOTES
+These instructions assume you are not a moron. If something feels wrong, stop. If you have doubts, stop. If you get a funny tickle, stop. You can contact me via www.fosscad.org and then click on the Chat link at the top. If I am not there, another FOSSCAD member will be able to assist you or take a message and I will get back to you. This firearm is INCREDIBLY experimental, and is meant as an ergonomics, feasibility, and design test. You are taking a risk just by building it. If this bothers you in the slightest, do not build one.
+
+If you've made it this far, I applaud you. You're one of the few that will actually succeed in creating this firearm. Feel free to modify, remix, create and destroy this model to your heart's content. We at FOSSCAD love pictures and testing videos, and even love having new names in the chat to talk to.
+
+As always my friends,
+
+You are free. Act like it!

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Forward_Top_Cap.step

@@ -0,0 +1,448 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Forward_Top_Cap.step',
+    '2014-05-14T06:09:18',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.03937007874015748000, 0.0000000000000000000 ) ) ;
+#2 = ADVANCED_FACE ( 'NONE', ( #210, #55 ), #77, .T. ) ;
+#3 = FACE_OUTER_BOUND ( 'NONE', #66, .T. ) ;
+#4 = ORIENTED_EDGE ( 'NONE', *, *, #362, .F. ) ;
+#5 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#6 = CARTESIAN_POINT ( 'NONE',  ( 0.3543307086614174200, 0.03937007874015748000, 8.678599364036362600E-017 ) ) ;
+#7 = VECTOR ( 'NONE', #220, 39.37007874015748100 ) ;
+#8 = ORIENTED_EDGE ( 'NONE', *, *, #412, .T. ) ;
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #383, .T. ) ;
+#10 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#11 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.968503937007874100 ) ) ;
+#12 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ;
+#13 = ORIENTED_EDGE ( 'NONE', *, *, #405, .T. ) ;
+#14 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#15 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#16 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #199 );
+#17 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#18 = LINE ( 'NONE', #403, #159 ) ;
+#19 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#20 = VERTEX_POINT ( 'NONE', #320 ) ;
+#21 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#22 =( CONVERSION_BASED_UNIT ( 'INCH', #16 ) LENGTH_UNIT ( ) NAMED_UNIT ( #181 ) );
+#23 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #305, .F. ) ;
+#25 = EDGE_LOOP ( 'NONE', ( #137, #115, #57, #31 ) ) ;
+#26 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #275 ) ;
+#27 = ORIENTED_EDGE ( 'NONE', *, *, #401, .T. ) ;
+#28 = VECTOR ( 'NONE', #365, 39.37007874015748100 ) ;
+#29 = CYLINDRICAL_SURFACE ( 'NONE', #255, 0.3937007874015748300 ) ;
+#30 = CARTESIAN_POINT ( 'NONE',  ( -0.3937007874015748300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#31 = ORIENTED_EDGE ( 'NONE', *, *, #371, .F. ) ;
+#32 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#33 = SURFACE_STYLE_USAGE ( .BOTH. , #205 ) ;
+#34 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#35 = ORIENTED_EDGE ( 'NONE', *, *, #428, .T. ) ;
+#36 = ADVANCED_FACE ( 'NONE', ( #204 ), #70, .F. ) ;
+#37 = CARTESIAN_POINT ( 'NONE',  ( 0.3543307086614174200, 0.03937007874015748000, -1.968503937007874100 ) ) ;
+#38 = PLANE ( 'NONE',  #315 ) ;
+#39 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#40 = VECTOR ( 'NONE', #105, 39.37007874015748100 ) ;
+#41 = VECTOR ( 'NONE', #241, 39.37007874015748100 ) ;
+#42 = ORIENTED_EDGE ( 'NONE', *, *, #387, .F. ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #419, .F. ) ;
+#44 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#45 = SURFACE_STYLE_FILL_AREA ( #429 ) ;
+#46 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#47 = CARTESIAN_POINT ( 'NONE',  ( -0.3937007874015748300, 0.03937007874015748000, 0.0000000000000000000 ) ) ;
+#48 = CIRCLE ( 'NONE', #130, 0.3543307086614174200 ) ;
+#49 = LINE ( 'NONE', #395, #373 ) ;
+#50 = EDGE_LOOP ( 'NONE', ( #242, #224, #266, #313 ) ) ;
+#51 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#52 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#53 = CIRCLE ( 'NONE', #301, 0.3543307086614173600 ) ;
+#54 = VERTEX_POINT ( 'NONE', #193 ) ;
+#55 = FACE_BOUND ( 'NONE', #85, .T. ) ;
+#56 = PLANE ( 'NONE',  #349 ) ;
+#57 = ORIENTED_EDGE ( 'NONE', *, *, #305, .T. ) ;
+#58 = CARTESIAN_POINT ( 'NONE',  ( -0.3543307086614172500, 0.03937007874015748000, -1.968503937007874100 ) ) ;
+#59 =( CONVERSION_BASED_UNIT ( 'INCH', #250 ) LENGTH_UNIT ( ) NAMED_UNIT ( #311 ) );
+#60 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#61 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.03937007874015748000, -1.968503937007874100 ) ) ;
+#62 = CARTESIAN_POINT ( 'NONE',  ( -0.3543307086614172500, 0.03937007874015748000, -1.968503937007874100 ) ) ;
+#63 = ADVANCED_FACE ( 'NONE', ( #381 ), #198, .F. ) ;
+#64 = LINE ( 'NONE', #270, #389 ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( 0.3937007874015748300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#66 = EDGE_LOOP ( 'NONE', ( #243, #177, #9, #42 ) ) ;
+#67 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #22, 'distance_accuracy_value', 'NONE');
+#68 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ;
+#69 = ORIENTED_EDGE ( 'NONE', *, *, #416, .T. ) ;
+#70 = PLANE ( 'NONE',  #356 ) ;
+#71 = VERTEX_POINT ( 'NONE', #256 ) ;
+#72 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.03937007874015748000, -1.968503937007874100 ) ) ;
+#73 = CYLINDRICAL_SURFACE ( 'NONE', #326, 0.3937007874015748800 ) ;
+#74 = ORIENTED_EDGE ( 'NONE', *, *, #394, .T. ) ;
+#75 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#76 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#77 = PLANE ( 'NONE',  #358 ) ;
+#78 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#79 = EDGE_LOOP ( 'NONE', ( #167, #24, #141, #423 ) ) ;
+#80 = VERTEX_POINT ( 'NONE', #30 ) ;
+#81 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #107 ) ;
+#82 = PRODUCT_CONTEXT ( 'NONE', #107, 'mechanical' ) ;
+#83 = AXIS2_PLACEMENT_3D ( 'NONE', #106, #333, #134 ) ;
+#84 = FACE_OUTER_BOUND ( 'NONE', #213, .T. ) ;
+#85 = EDGE_LOOP ( 'NONE', ( #43, #203, #420, #99, #68 ) ) ;
+#86 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#87 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 6.938893903907228400E-017 ) ) ;
+#88 = EDGE_LOOP ( 'NONE', ( #148, #398, #249, #158 ) ) ;
+#89 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#90 = ORIENTED_EDGE ( 'NONE', *, *, #304, .T. ) ;
+#91 = DIRECTION ( 'NONE',  ( -6.938893903907228400E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#92 = ADVANCED_FACE ( 'NONE', ( #278 ), #56, .F. ) ;
+#93 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( -0.3937007874015748300, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#95 = LINE ( 'NONE', #47, #340 ) ;
+#96 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ;
+#97 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#98 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#99 = ORIENTED_EDGE ( 'NONE', *, *, #424, .F. ) ;
+#100 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#101 = CARTESIAN_POINT ( 'NONE',  ( 0.3937007874015748300, 0.03937007874015748000, -1.968503937007874100 ) ) ;
+#102 = LINE ( 'NONE', #399, #169 ) ;
+#103 = CARTESIAN_POINT ( 'NONE',  ( -0.3937007874015748300, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#104 = ORIENTED_EDGE ( 'NONE', *, *, #391, .T. ) ;
+#105 = DIRECTION ( 'NONE',  ( -6.938893903907228400E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#106 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, 0.0000000000000000000 ) ) ;
+#107 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #392, .F. ) ;
+#109 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #295 ) ;
+#110 = CIRCLE ( 'NONE', #83, 0.3543307086614174200 ) ;
+#111 = LINE ( 'NONE', #396, #41 ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #394, .F. ) ;
+#113 = AXIS2_PLACEMENT_3D ( 'NONE', #411, #196, #21 ) ;
+#114 = PLANE ( 'NONE',  #342 ) ;
+#115 = ORIENTED_EDGE ( 'NONE', *, *, #421, .T. ) ;
+#116 = FACE_OUTER_BOUND ( 'NONE', #236, .T. ) ;
+#117 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#118 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.03937007874015748000, -1.968503937007874100 ) ) ;
+#119 = ADVANCED_FACE ( 'NONE', ( #116 ), #368, .F. ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.03937007874015748000, -2.322834645669291700 ) ) ;
+#121 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#122 = LINE ( 'NONE', #103, #268 ) ;
+#123 = VECTOR ( 'NONE', #184, 39.37007874015748100 ) ;
+#124 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#125 = FACE_OUTER_BOUND ( 'NONE', #79, .T. ) ;
+#126 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, -2.322834645669291700 ) ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#128 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#129 = CIRCLE ( 'NONE', #258, 0.3937007874015748300 ) ;
+#130 = AXIS2_PLACEMENT_3D ( 'NONE', #195, #19, #223 ) ;
+#131 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( -0.3937007874015748300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#133 = ORIENTED_EDGE ( 'NONE', *, *, #370, .F. ) ;
+#134 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#135 = SURFACE_SIDE_STYLE ('',( #425 ) ) ;
+#136 = VECTOR ( 'NONE', #308, 39.37007874015748100 ) ;
+#137 = ORIENTED_EDGE ( 'NONE', *, *, #428, .F. ) ;
+#138 = VERTEX_POINT ( 'NONE', #58 ) ;
+#139 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( -0.3937007874015748300, 0.0000000000000000000, -1.968503937007874100 ) ) ;
+#141 = ORIENTED_EDGE ( 'NONE', *, *, #419, .T. ) ;
+#142 = CARTESIAN_POINT ( 'NONE',  ( 0.3937007874015748300, 0.1968503937007874100, 0.0000000000000000000 ) ) ;
+#143 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#144 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#145 = ADVANCED_FACE ( 'NONE', ( #125 ), #114, .T. ) ;
+#146 = LINE ( 'NONE', #62, #417 ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( -0.3543307086614174200, 0.03937007874015748000, 0.0000000000000000000 ) ) ;
+#148 = ORIENTED_EDGE ( 'NONE', *, *, #397, .T. ) ;
+#150 = CIRCLE ( 'NONE', #149, 0.3937007874015748800 ) ;
+#149 = AXIS2_PLACEMENT_3D ( 'NONE', #246, #76, #286 ) ;
+#151 = VERTEX_POINT ( 'NONE', #259 ) ;
+#152 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#153 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#155 = LINE ( 'NONE', #265, #136 ) ;
+#156 = VERTEX_POINT ( 'NONE', #140 ) ;
+#157 = AXIS2_PLACEMENT_3D ( 'NONE', #406, #192, #17 ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #392, .T. ) ;
+#159 = VECTOR ( 'NONE', #15, 39.37007874015748100 ) ;
+#160 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.362204724409449100 ) ) ;
+#161 = ORIENTED_EDGE ( 'NONE', *, *, #416, .F. ) ;
+#162 = CARTESIAN_POINT ( 'NONE',  ( 0.3543307086614174200, 0.1968503937007874100, 8.678599364036362600E-017 ) ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #371, .T. ) ;
+#164 = FILL_AREA_STYLE_COLOUR ( '', #78 ) ;
+#165 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#166 = ORIENTED_EDGE ( 'NONE', *, *, #397, .F. ) ;
+#167 = ORIENTED_EDGE ( 'NONE', *, *, #304, .F. ) ;
+#168 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, 0.0000000000000000000 ) ) ;
+#169 = VECTOR ( 'NONE', #100, 39.37007874015748100 ) ;
+#170 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude2', #284 ) ;
+#171 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#172 = EDGE_LOOP ( 'NONE', ( #303, #354, #363, #12, #166 ) ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#174 = ORIENTED_EDGE ( 'NONE', *, *, #382, .T. ) ;
+#175 = PLANE ( 'NONE',  #328 ) ;
+#176 = ADVANCED_FACE ( 'NONE', ( #336 ), #324, .F. ) ;
+#177 = ORIENTED_EDGE ( 'NONE', *, *, #379, .T. ) ;
+#178 = CARTESIAN_POINT ( 'NONE',  ( 0.3543307086614174200, 0.1968503937007874100, 2.169649841009090600E-017 ) ) ;
+#179 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#180 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ;
+#181 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#182 = LINE ( 'NONE', #409, #28 ) ;
+#183 = VECTOR ( 'NONE', #128, 39.37007874015748100 ) ;
+#184 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#185 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.03937007874015748000, 0.0000000000000000000 ) ) ;
+#187 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #295, 'design' ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#189 = LINE ( 'NONE', #162, #253 ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( 0.3543307086614174200, 0.03937007874015748000, 2.169649841009090600E-017 ) ) ;
+#191 = CIRCLE ( 'NONE', #299, 0.3937007874015748800 ) ;
+#192 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( 0.3543307086614174200, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#194 = ORIENTED_EDGE ( 'NONE', *, *, #387, .T. ) ;
+#195 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.03937007874015748000, 0.0000000000000000000 ) ) ;
+#196 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#197 = ORIENTED_EDGE ( 'NONE', *, *, #405, .F. ) ;
+#198 = CYLINDRICAL_SURFACE ( 'NONE', #352, 0.3543307086614174200 ) ;
+#199 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#200 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#201 = VECTOR ( 'NONE', #330, 39.37007874015748100 ) ;
+#202 = LINE ( 'NONE', #178, #123 ) ;
+#203 = ORIENTED_EDGE ( 'NONE', *, *, #421, .F. ) ;
+#204 = FACE_OUTER_BOUND ( 'NONE', #88, .T. ) ;
+#205 = SURFACE_SIDE_STYLE ('',( #45 ) ) ;
+#206 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#207 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #424, .T. ) ;
+#209 = ADVANCED_FACE ( 'NONE', ( #233 ), #175, .F. ) ;
+#210 = FACE_OUTER_BOUND ( 'NONE', #404, .T. ) ;
+#211 = LINE ( 'NONE', #6, #297 ) ;
+#212 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.03937007874015748000, -1.968503937007874100 ) ) ;
+#213 = EDGE_LOOP ( 'NONE', ( #351, #197, #27, #180 ) ) ;
+#214 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #165 );
+#215 = ORIENTED_EDGE ( 'NONE', *, *, #402, .T. ) ;
+#216 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#217 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#218 = CIRCLE ( 'NONE', #316, 0.3543307086614173600 ) ;
+#219 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#220 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#221 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#222 = VERTEX_POINT ( 'NONE', #142 ) ;
+#223 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#224 = ORIENTED_EDGE ( 'NONE', *, *, #366, .F. ) ;
+#225 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#226 = FACE_OUTER_BOUND ( 'NONE', #251, .T. ) ;
+#227 = VERTEX_POINT ( 'NONE', #263 ) ;
+#228 = VECTOR ( 'NONE', #75, 39.37007874015748100 ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( -0.3543307086614172500, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#230 = VERTEX_POINT ( 'NONE', #431 ) ;
+#231 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#232 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#233 = FACE_OUTER_BOUND ( 'NONE', #273, .T. ) ;
+#234 = CARTESIAN_POINT ( 'NONE',  ( -0.3543307086614172500, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#235 = ADVANCED_FACE ( 'NONE', ( #84 ), #73, .T. ) ;
+#236 = EDGE_LOOP ( 'NONE', ( #343, #35, #4, #413 ) ) ;
+#237 = CARTESIAN_POINT ( 'NONE',  ( 0.3543307086614174200, 0.1968503937007874100, 8.678599364036362600E-017 ) ) ;
+#238 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#239 = LINE ( 'NONE', #282, #228 ) ;
+#240 = EDGE_LOOP ( 'NONE', ( #322, #133, #208, #430 ) ) ;
+#241 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#242 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ;
+#243 = ORIENTED_EDGE ( 'NONE', *, *, #382, .F. ) ;
+#244 = VERTEX_POINT ( 'NONE', #384 ) ;
+#245 = LINE ( 'NONE', #101, #7 ) ;
+#246 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.968503937007874100 ) ) ;
+#247 = ORIENTED_EDGE ( 'NONE', *, *, #393, .F. ) ;
+#248 = CARTESIAN_POINT ( 'NONE',  ( -0.3543307086614172500, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#249 = ORIENTED_EDGE ( 'NONE', *, *, #402, .F. ) ;
+#250 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #231 );
+#251 = EDGE_LOOP ( 'NONE', ( #300, #163, #90, #96, #317 ) ) ;
+#252 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#253 = VECTOR ( 'NONE', #289, 39.37007874015748100 ) ;
+#254 = LINE ( 'NONE', #325, #183 ) ;
+#255 = AXIS2_PLACEMENT_3D ( 'NONE', #186, #44, #153 ) ;
+#256 = CARTESIAN_POINT ( 'NONE',  ( -0.3937007874015748300, 0.1968503937007874100, -4.821444091131312100E-017 ) ) ;
+#257 = EDGE_LOOP ( 'NONE', ( #104, #108, #247, #74 ) ) ;
+#258 = AXIS2_PLACEMENT_3D ( 'NONE', #188, #14, #219 ) ;
+#259 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, -2.362204724409449100 ) ) ;
+#260 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#261 = PRESENTATION_STYLE_ASSIGNMENT (( #33 ) ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #393, .T. ) ;
+#263 = CARTESIAN_POINT ( 'NONE',  ( 0.3937007874015748300, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#264 = ADVANCED_FACE ( 'NONE', ( #3 ), #309, .T. ) ;
+#265 = CARTESIAN_POINT ( 'NONE',  ( -0.3543307086614172500, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#266 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ;
+#267 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#268 = VECTOR ( 'NONE', #221, 39.37007874015748100 ) ;
+#269 = CIRCLE ( 'NONE', #298, 0.3937007874015748800 ) ;
+#270 = CARTESIAN_POINT ( 'NONE',  ( -0.3543307086614174200, 0.1968503937007874100, 0.0000000000000000000 ) ) ;
+#271 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #312 ) ) ;
+#272 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #312, .NOT_KNOWN. ) ;
+#273 = EDGE_LOOP ( 'NONE', ( #8, #112, #161, #194 ) ) ;
+#274 = CARTESIAN_POINT ( 'NONE',  ( 0.3937007874015748300, 0.03937007874015748000, 0.0000000000000000000 ) ) ;
+#275 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #272, #187 ) ;
+#276 = VERTEX_POINT ( 'NONE', #37 ) ;
+#277 = SHAPE_DEFINITION_REPRESENTATION ( #26, #378 ) ;
+#278 = FACE_OUTER_BOUND ( 'NONE', #172, .T. ) ;
+#279 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#280 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #52, #252 ) ;
+#281 = LINE ( 'NONE', #132, #201 ) ;
+#282 = CARTESIAN_POINT ( 'NONE',  ( 0.3937007874015748300, 0.1968503937007874100, 0.0000000000000000000 ) ) ;
+#283 = CIRCLE ( 'NONE', #310, 0.3543307086614173600 ) ;
+#284 = CLOSED_SHELL ( 'NONE', ( #119, #264, #385, #36, #235, #209, #92, #2, #176, #145, #63, #347, #307 ) ) ;
+#285 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #338 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #415, #200, #23 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#286 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, 0.0000000000000000000 ) ) ;
+#288 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #293 ), #285 ) ;
+#289 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#290 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #293 ) ) ;
+#291 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#292 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#293 = STYLED_ITEM ( 'NONE', ( #318 ), #378 ) ;
+#294 = VERTEX_POINT ( 'NONE', #234 ) ;
+#295 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#296 = AXIS2_PLACEMENT_3D ( 'NONE', #327, #131, #360 ) ;
+#297 = VECTOR ( 'NONE', #390, 39.37007874015748100 ) ;
+#298 = AXIS2_PLACEMENT_3D ( 'NONE', #11, #217, #46 ) ;
+#299 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #359, #154 ) ;
+#300 = ORIENTED_EDGE ( 'NONE', *, *, #362, .T. ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #185, #10, #216 ) ;
+#302 = DIRECTION ( 'NONE',  ( 6.938893903907228400E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#303 = ORIENTED_EDGE ( 'NONE', *, *, #391, .F. ) ;
+#304 = EDGE_CURVE ( 'NONE', #138, #332, #146, .T. ) ;
+#305 = EDGE_CURVE ( 'NONE', #294, #138, #155, .T. ) ;
+#306 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#307 = ADVANCED_FACE ( 'NONE', ( #226 ), #386, .T. ) ;
+#308 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#309 = CYLINDRICAL_SURFACE ( 'NONE', #323, 0.3937007874015748800 ) ;
+#310 = AXIS2_PLACEMENT_3D ( 'NONE', #72, #279, #97 ) ;
+#311 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#312 = PRODUCT ( 'Forward_Top_Cap', 'Forward_Top_Cap', '', ( #82 ) ) ;
+#313 = ORIENTED_EDGE ( 'NONE', *, *, #370, .T. ) ;
+#314 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#315 = AXIS2_PLACEMENT_3D ( 'NONE', #237, #267, #93 ) ;
+#316 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #39, #238 ) ;
+#317 = ORIENTED_EDGE ( 'NONE', *, *, #364, .T. ) ;
+#318 = PRESENTATION_STYLE_ASSIGNMENT (( #369 ) ) ;
+#319 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #179, #5 ) ;
+#320 = CARTESIAN_POINT ( 'NONE',  ( 0.3543307086614174200, 0.1968503937007874100, 2.169662180560743000E-017 ) ) ;
+#321 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #67 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #22, #225, #51 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#322 = ORIENTED_EDGE ( 'NONE', *, *, #364, .F. ) ;
+#323 = AXIS2_PLACEMENT_3D ( 'NONE', #118, #144, #232 ) ;
+#324 = CYLINDRICAL_SURFACE ( 'NONE', #329, 0.3543307086614173600 ) ;
+#325 = CARTESIAN_POINT ( 'NONE',  ( -0.3937007874015748300, 0.03937007874015748000, -1.968503937007874100 ) ) ;
+#326 = AXIS2_PLACEMENT_3D ( 'NONE', #61, #34, #306 ) ;
+#327 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, 0.0000000000000000000 ) ) ;
+#328 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #32, #207 ) ;
+#329 = AXIS2_PLACEMENT_3D ( 'NONE', #173, #345, #117 ) ;
+#330 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#331 = CIRCLE ( 'NONE', #157, 0.3937007874015748800 ) ;
+#332 = VERTEX_POINT ( 'NONE', #147 ) ;
+#333 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#334 = FILL_AREA_STYLE ('',( #164 ) ) ;
+#335 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #422 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #59, #260, #89 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#336 = FACE_OUTER_BOUND ( 'NONE', #25, .T. ) ;
+#337 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #357 ), #335 ) ;
+#338 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #415, 'distance_accuracy_value', 'NONE');
+#339 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #357 ) ) ;
+#340 = VECTOR ( 'NONE', #98, 39.37007874015748100 ) ;
+#341 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#342 = AXIS2_PLACEMENT_3D ( 'NONE', #229, #87, #302 ) ;
+#343 = ORIENTED_EDGE ( 'NONE', *, *, #375, .T. ) ;
+#344 = AXIS2_PLACEMENT_3D ( 'NONE', #171, #426, #376 ) ;
+#345 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#346 = CARTESIAN_POINT ( 'NONE',  ( -0.3937007874015748300, 0.03937007874015748000, 0.0000000000000000000 ) ) ;
+#347 = ADVANCED_FACE ( 'NONE', ( #400 ), #38, .T. ) ;
+#348 = VERTEX_POINT ( 'NONE', #65 ) ;
+#349 = AXIS2_PLACEMENT_3D ( 'NONE', #86, #341, #139 ) ;
+#350 = VERTEX_POINT ( 'NONE', #120 ) ;
+#351 = ORIENTED_EDGE ( 'NONE', *, *, #379, .F. ) ;
+#352 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #124, #206 ) ;
+#353 = CIRCLE ( 'NONE', #296, 0.3937007874015748300 ) ;
+#354 = ORIENTED_EDGE ( 'NONE', *, *, #412, .F. ) ;
+#355 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#356 = AXIS2_PLACEMENT_3D ( 'NONE', #274, #143, #60 ) ;
+#357 = STYLED_ITEM ( 'NONE', ( #261 ), #170 ) ;
+#358 = AXIS2_PLACEMENT_3D ( 'NONE', #287, #408, #355 ) ;
+#359 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#360 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#361 = FACE_OUTER_BOUND ( 'NONE', #257, .T. ) ;
+#362 = EDGE_CURVE ( 'NONE', #276, #350, #218, .T. ) ;
+#363 = ORIENTED_EDGE ( 'NONE', *, *, #383, .F. ) ;
+#364 = EDGE_CURVE ( 'NONE', #410, #276, #211, .T. ) ;
+#365 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#366 = EDGE_CURVE ( 'NONE', #230, #332, #64, .T. ) ;
+#367 = VERTEX_POINT ( 'NONE', #94 ) ;
+#368 = CYLINDRICAL_SURFACE ( 'NONE', #344, 0.3543307086614173600 ) ;
+#369 = SURFACE_STYLE_USAGE ( .BOTH. , #135 ) ;
+#370 = EDGE_CURVE ( 'NONE', #20, #410, #202, .T. ) ;
+#371 = EDGE_CURVE ( 'NONE', #350, #138, #283, .T. ) ;
+#372 = LINE ( 'NONE', #248, #40 ) ;
+#373 = VECTOR ( 'NONE', #152, 39.37007874015748100 ) ;
+#374 = EDGE_CURVE ( 'NONE', #54, #276, #49, .T. ) ;
+#375 = EDGE_CURVE ( 'NONE', #54, #377, #53, .T. ) ;
+#376 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#377 = VERTEX_POINT ( 'NONE', #126 ) ;
+#378 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Forward_Top_Cap', ( #170, #280 ), #321 ) ;
+#379 = EDGE_CURVE ( 'NONE', #151, #418, #111, .T. ) ;
+#380 = FILL_AREA_STYLE_COLOUR ( '', #291 ) ;
+#381 = FACE_OUTER_BOUND ( 'NONE', #50, .T. ) ;
+#382 = EDGE_CURVE ( 'NONE', #151, #367, #191, .T. ) ;
+#383 = EDGE_CURVE ( 'NONE', #418, #156, #269, .T. ) ;
+#384 = CARTESIAN_POINT ( 'NONE',  ( 0.3937007874015748300, 0.0000000000000000000, -1.968503937007874100 ) ) ;
+#385 = ADVANCED_FACE ( 'NONE', ( #361 ), #29, .T. ) ;
+#386 = PLANE ( 'NONE',  #319 ) ;
+#387 = EDGE_CURVE ( 'NONE', #367, #156, #254, .T. ) ;
+#388 = CIRCLE ( 'NONE', #113, 0.3543307086614173600 ) ;
+#389 = VECTOR ( 'NONE', #314, 39.37007874015748100 ) ;
+#390 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#391 = EDGE_CURVE ( 'NONE', #80, #348, #129, .T. ) ;
+#392 = EDGE_CURVE ( 'NONE', #222, #348, #102, .T. ) ;
+#393 = EDGE_CURVE ( 'NONE', #71, #222, #353, .T. ) ;
+#394 = EDGE_CURVE ( 'NONE', #71, #80, #95, .T. ) ;
+#395 = CARTESIAN_POINT ( 'NONE',  ( 0.3543307086614174200, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#396 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.03937007874015748000, -2.362204724409449100 ) ) ;
+#397 = EDGE_CURVE ( 'NONE', #348, #244, #18, .T. ) ;
+#398 = ORIENTED_EDGE ( 'NONE', *, *, #401, .F. ) ;
+#399 = CARTESIAN_POINT ( 'NONE',  ( 0.3937007874015748300, 0.03937007874015748000, 0.0000000000000000000 ) ) ;
+#401 = EDGE_CURVE ( 'NONE', #227, #244, #245, .T. ) ;
+#400 = FACE_OUTER_BOUND ( 'NONE', #240, .T. ) ;
+#402 = EDGE_CURVE ( 'NONE', #222, #227, #239, .T. ) ;
+#403 = CARTESIAN_POINT ( 'NONE',  ( 0.3937007874015748300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#404 = EDGE_LOOP ( 'NONE', ( #262, #215, #13, #174, #69 ) ) ;
+#405 = EDGE_CURVE ( 'NONE', #227, #151, #331, .T. ) ;
+#406 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#407 = EDGE_CURVE ( 'NONE', #244, #418, #150, .T. ) ;
+#408 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#409 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, -2.322834645669291700 ) ) ;
+#410 = VERTEX_POINT ( 'NONE', #190 ) ;
+#411 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1968503937007874100, -1.968503937007874100 ) ) ;
+#412 = EDGE_CURVE ( 'NONE', #156, #80, #281, .T. ) ;
+#413 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ;
+#414 = EDGE_CURVE ( 'NONE', #332, #410, #48, .T. ) ;
+#415 =( CONVERSION_BASED_UNIT ( 'INCH', #214 ) LENGTH_UNIT ( ) NAMED_UNIT ( #121 ) );
+#416 = EDGE_CURVE ( 'NONE', #367, #71, #122, .T. ) ;
+#417 = VECTOR ( 'NONE', #91, 39.37007874015748100 ) ;
+#418 = VERTEX_POINT ( 'NONE', #160 ) ;
+#419 = EDGE_CURVE ( 'NONE', #294, #230, #372, .T. ) ;
+#420 = ORIENTED_EDGE ( 'NONE', *, *, #375, .F. ) ;
+#421 = EDGE_CURVE ( 'NONE', #377, #294, #388, .T. ) ;
+#422 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #59, 'distance_accuracy_value', 'NONE');
+#423 = ORIENTED_EDGE ( 'NONE', *, *, #366, .T. ) ;
+#424 = EDGE_CURVE ( 'NONE', #20, #54, #189, .T. ) ;
+#425 = SURFACE_STYLE_FILL_AREA ( #334 ) ;
+#426 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#427 = EDGE_CURVE ( 'NONE', #230, #20, #110, .T. ) ;
+#428 = EDGE_CURVE ( 'NONE', #377, #350, #182, .T. ) ;
+#429 = FILL_AREA_STYLE ('',( #380 ) ) ;
+#430 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ;
+#431 = CARTESIAN_POINT ( 'NONE',  ( -0.3543307086614174200, 0.1968503937007874100, 0.0000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Lifter.step

@@ -0,0 +1,409 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Lifter.step',
+    '2014-05-14T06:09:15',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#2 = LINE ( 'NONE', #358, #141 ) ;
+#3 = ADVANCED_FACE ( 'NONE', ( #161 ), #45, .F. ) ;
+#4 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#5 = VERTEX_POINT ( 'NONE', #71 ) ;
+#6 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, 0.0000000000000000000, 0.3937007874015748300 ) ) ;
+#7 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#8 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#9 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #251, 'distance_accuracy_value', 'NONE');
+#10 = ORIENTED_EDGE ( 'NONE', *, *, #353, .T. ) ;
+#11 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#12 = VECTOR ( 'NONE', #220, 39.37007874015748100 ) ;
+#13 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #176 ) ;
+#14 = CIRCLE ( 'NONE', #288, 0.03937007874015751400 ) ;
+#15 = VERTEX_POINT ( 'NONE', #317 ) ;
+#16 = ORIENTED_EDGE ( 'NONE', *, *, #386, .F. ) ;
+#17 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#18 = ORIENTED_EDGE ( 'NONE', *, *, #368, .F. ) ;
+#19 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#20 = LINE ( 'NONE', #120, #158 ) ;
+#21 = CARTESIAN_POINT ( 'NONE',  ( -3.425831994024652900, -1.643700787401574800, 0.0000000000000000000 ) ) ;
+#22 = ORIENTED_EDGE ( 'NONE', *, *, #375, .T. ) ;
+#23 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #359, .T. ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( -3.731495537015316000, -1.479658792650918200, -0.2362204724409451600 ) ) ;
+#26 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#27 = SURFACE_STYLE_FILL_AREA ( #211 ) ;
+#28 = VERTEX_POINT ( 'NONE', #146 ) ;
+#29 = CIRCLE ( 'NONE', #295, 0.03937007874015751400 ) ;
+#30 = ORIENTED_EDGE ( 'NONE', *, *, #367, .F. ) ;
+#31 = ADVANCED_FACE ( 'NONE', ( #155 ), #366, .F. ) ;
+#32 = PRODUCT ( 'Lifter', 'Lifter', '', ( #363 ) ) ;
+#33 = ORIENTED_EDGE ( 'NONE', *, *, #365, .T. ) ;
+#34 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#35 = FACE_OUTER_BOUND ( 'NONE', #87, .T. ) ;
+#36 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.0000000000000000000 ) ) ;
+#37 = CARTESIAN_POINT ( 'NONE',  ( -3.425831994024652900, -1.643700787401574800, -0.2362204724409451600 ) ) ;
+#38 = ORIENTED_EDGE ( 'NONE', *, *, #370, .T. ) ;
+#39 = EDGE_LOOP ( 'NONE', ( #372, #112, #68, #166 ) ) ;
+#40 = SURFACE_SIDE_STYLE ('',( #154 ) ) ;
+#41 = LINE ( 'NONE', #169, #250 ) ;
+#42 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #375, .F. ) ;
+#44 = LINE ( 'NONE', #180, #243 ) ;
+#45 = PLANE ( 'NONE',  #332 ) ;
+#46 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#47 = VECTOR ( 'NONE', #52, 39.37007874015748100 ) ;
+#48 = CARTESIAN_POINT ( 'NONE',  ( -3.731495537015316000, -1.479658792650918200, 0.3937007874015748300 ) ) ;
+#49 = SURFACE_SIDE_STYLE ('',( #27 ) ) ;
+#50 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, -1.249999999999999300, 0.3937007874015748300 ) ) ;
+#51 = VERTEX_POINT ( 'NONE', #152 ) ;
+#52 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#53 = EDGE_LOOP ( 'NONE', ( #63, #160, #92, #324 ) ) ;
+#54 = EDGE_LOOP ( 'NONE', ( #333, #177, #33, #147, #18, #281, #292 ) ) ;
+#55 = LINE ( 'NONE', #50, #360 ) ;
+#56 = SHAPE_DEFINITION_REPRESENTATION ( #123, #200 ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.0000000000000000000 ) ) ;
+#58 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#59 = ADVANCED_FACE ( 'NONE', ( #191 ), #194, .F. ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #342, .T. ) ;
+#61 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#62 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.0000000000000000000 ) ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #350, .T. ) ;
+#64 = ORIENTED_EDGE ( 'NONE', *, *, #350, .F. ) ;
+#65 = VECTOR ( 'NONE', #186, 39.37007874015748100 ) ;
+#66 = FILL_AREA_STYLE_COLOUR ( '', #203 ) ;
+#67 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#68 = ORIENTED_EDGE ( 'NONE', *, *, #236, .F. ) ;
+#69 = ORIENTED_EDGE ( 'NONE', *, *, #236, .T. ) ;
+#70 = ORIENTED_EDGE ( 'NONE', *, *, #386, .T. ) ;
+#71 = CARTESIAN_POINT ( 'NONE',  ( -3.731495537015316000, -1.414041994750655700, 0.0000000000000000000 ) ) ;
+#72 = ORIENTED_EDGE ( 'NONE', *, *, #338, .F. ) ;
+#73 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#74 = VECTOR ( 'NONE', #196, 39.37007874015748100 ) ;
+#75 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #255 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #259, #107, #299 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#76 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#77 = EDGE_LOOP ( 'NONE', ( #179, #130, #238, #235 ) ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( -3.731495537015316000, -1.479658792650918200, 0.0000000000000000000 ) ) ;
+#79 = PLANE ( 'NONE',  #304 ) ;
+#80 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #76 );
+#81 = EDGE_LOOP ( 'NONE', ( #30, #110, #135, #149 ) ) ;
+#82 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#83 = PRESENTATION_STYLE_ASSIGNMENT (( #222 ) ) ;
+#84 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#85 = CIRCLE ( 'NONE', #289, 0.1968503937007875800 ) ;
+#86 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#87 = EDGE_LOOP ( 'NONE', ( #267, #10, #308, #189 ) ) ;
+#88 = ADVANCED_FACE ( 'NONE', ( #167 ), #252, .T. ) ;
+#89 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#90 = CYLINDRICAL_SURFACE ( 'NONE', #145, 0.1968503937007875800 ) ;
+#91 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#92 = ORIENTED_EDGE ( 'NONE', *, *, #342, .F. ) ;
+#93 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#94 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#95 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#96 = VECTOR ( 'NONE', #117, 39.37007874015748100 ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #379, .F. ) ;
+#98 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#99 = VERTEX_POINT ( 'NONE', #374 ) ;
+#100 = COLOUR_RGB ( '',0.6941176470588235100, 0.09411764705882352800, 0.09411764705882352800 ) ;
+#101 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ;
+#102 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #94 );
+#103 = PLANE ( 'NONE',  #302 ) ;
+#104 = CIRCLE ( 'NONE', #296, 0.1968503937007875800 ) ;
+#105 = VERTEX_POINT ( 'NONE', #249 ) ;
+#106 = PLANE ( 'NONE',  #325 ) ;
+#107 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#108 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#109 = FACE_OUTER_BOUND ( 'NONE', #54, .T. ) ;
+#110 = ORIENTED_EDGE ( 'NONE', *, *, #318, .T. ) ;
+#111 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #150 ), #75 ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #362, .F. ) ;
+#113 = LINE ( 'NONE', #6, #305 ) ;
+#114 = DIRECTION ( 'NONE',  ( 0.7071067811865479100, 0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#115 = EDGE_LOOP ( 'NONE', ( #60, #22 ) ) ;
+#116 = ADVANCED_FACE ( 'NONE', ( #354 ), #340, .F. ) ;
+#117 = DIRECTION ( 'NONE',  ( -0.7071067811865479100, -0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#118 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#119 = FACE_BOUND ( 'NONE', #115, .T. ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, -1.190944881889763000, 0.3937007874015748300 ) ) ;
+#121 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#122 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#123 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #263 ) ;
+#124 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#125 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#126 = CIRCLE ( 'NONE', #315, 0.1181102362204725500 ) ;
+#127 = VERTEX_POINT ( 'NONE', #228 ) ;
+#128 = EDGE_CURVE ( 'NONE', #105, #15, #44, .T. ) ;
+#129 = ORIENTED_EDGE ( 'NONE', *, *, #390, .T. ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #128, .F. ) ;
+#131 = CIRCLE ( 'NONE', #328, 0.1181102362204725500 ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( -3.819532781426227900, -1.249999999999999600, 0.0000000000000000000 ) ) ;
+#133 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#134 = EDGE_LOOP ( 'NONE', ( #70, #69, #38, #225 ) ) ;
+#135 = ORIENTED_EDGE ( 'NONE', *, *, #379, .T. ) ;
+#136 = FACE_OUTER_BOUND ( 'NONE', #77, .T. ) ;
+#137 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #280, 'distance_accuracy_value', 'NONE');
+#138 = VERTEX_POINT ( 'NONE', #132 ) ;
+#139 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#140 = ADVANCED_FACE ( 'NONE', ( #119, #187 ), #103, .F. ) ;
+#141 = VECTOR ( 'NONE', #8, 39.37007874015748100 ) ;
+#142 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#143 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ;
+#144 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#145 = AXIS2_PLACEMENT_3D ( 'NONE', #209, #298, #133 ) ;
+#146 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, -1.249999999999999300, 0.0000000000000000000 ) ) ;
+#147 = ORIENTED_EDGE ( 'NONE', *, *, #367, .T. ) ;
+#148 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#149 = ORIENTED_EDGE ( 'NONE', *, *, #388, .T. ) ;
+#150 = STYLED_ITEM ( 'NONE', ( #226 ), #285 ) ;
+#151 = VERTEX_POINT ( 'NONE', #334 ) ;
+#152 = CARTESIAN_POINT ( 'NONE',  ( -3.819532781426227900, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#153 = EDGE_LOOP ( 'NONE', ( #387, #24, #316, #43 ) ) ;
+#154 = SURFACE_STYLE_FILL_AREA ( #202 ) ;
+#155 = FACE_OUTER_BOUND ( 'NONE', #53, .T. ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( -3.504572151504967700, -1.249999999999999600, 0.0000000000000000000 ) ) ;
+#157 = CARTESIAN_POINT ( 'NONE',  ( -3.425831994024652900, -1.643700787401574800, 0.3937007874015748300 ) ) ;
+#158 = VECTOR ( 'NONE', #144, 39.37007874015748100 ) ;
+#159 = FILL_AREA_STYLE_COLOUR ( '', #100 ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #345, .T. ) ;
+#161 = FACE_OUTER_BOUND ( 'NONE', #134, .T. ) ;
+#162 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#163 = VERTEX_POINT ( 'NONE', #208 ) ;
+#164 = CARTESIAN_POINT ( 'NONE',  ( -3.740792623945913100, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#165 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#166 = ORIENTED_EDGE ( 'NONE', *, *, #383, .T. ) ;
+#167 = FACE_OUTER_BOUND ( 'NONE', #81, .T. ) ;
+#168 = CIRCLE ( 'NONE', #290, 0.1181102362204725500 ) ;
+#169 = CARTESIAN_POINT ( 'NONE',  ( -3.819532781426227900, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#170 = VERTEX_POINT ( 'NONE', #156 ) ;
+#171 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#172 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#173 = CYLINDRICAL_SURFACE ( 'NONE', #301, 0.1968503937007875800 ) ;
+#174 = CARTESIAN_POINT ( 'NONE',  ( -3.753258166873290900, -1.446850393700787100, 0.0000000000000000000 ) ) ;
+#175 = VECTOR ( 'NONE', #139, 39.37007874015748100 ) ;
+#176 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#177 = ORIENTED_EDGE ( 'NONE', *, *, #348, .T. ) ;
+#178 = LINE ( 'NONE', #231, #313 ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #389, .T. ) ;
+#180 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, -1.190944881889763000, 0.3937007874015748300 ) ) ;
+#181 = ORIENTED_EDGE ( 'NONE', *, *, #388, .F. ) ;
+#182 = CIRCLE ( 'NONE', #306, 0.1968503937007875800 ) ;
+#183 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#184 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#185 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, 0.0000000000000000000, 0.3937007874015748300 ) ) ;
+#186 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#187 = FACE_OUTER_BOUND ( 'NONE', #311, .T. ) ;
+#188 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#189 = ORIENTED_EDGE ( 'NONE', *, *, #356, .T. ) ;
+#190 = VECTOR ( 'NONE', #23, 39.37007874015748100 ) ;
+#191 = FACE_OUTER_BOUND ( 'NONE', #153, .T. ) ;
+#192 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#193 = ADVANCED_FACE ( 'NONE', ( #35 ), #173, .T. ) ;
+#194 = CYLINDRICAL_SURFACE ( 'NONE', #322, 0.1181102362204725500 ) ;
+#195 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.643700787401574300, 0.3937007874015748300 ) ) ;
+#196 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#197 = ORIENTED_EDGE ( 'NONE', *, *, #383, .F. ) ;
+#198 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#199 = CARTESIAN_POINT ( 'NONE',  ( -0.8910656033115380600, 0.8910656033115387200, 0.0000000000000000000 ) ) ;
+#200 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Lifter', ( #285, #266 ), #283 ) ;
+#201 = LINE ( 'NONE', #164, #190 ) ;
+#202 = FILL_AREA_STYLE ('',( #66 ) ) ;
+#203 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#204 = ORIENTED_EDGE ( 'NONE', *, *, #389, .F. ) ;
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #318, .F. ) ;
+#206 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#207 = VERTEX_POINT ( 'NONE', #48 ) ;
+#208 = CARTESIAN_POINT ( 'NONE',  ( -3.434899080359899800, -1.190944881889763000, 0.0000000000000000000 ) ) ;
+#209 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#210 = LINE ( 'NONE', #199, #12 ) ;
+#211 = FILL_AREA_STYLE ('',( #159 ) ) ;
+#212 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#213 = EDGE_LOOP ( 'NONE', ( #101, #205, #224, #303 ) ) ;
+#214 = LINE ( 'NONE', #37, #284 ) ;
+#215 = ADVANCED_FACE ( 'NONE', ( #233, #109 ), #294, .T. ) ;
+#216 = ORIENTED_EDGE ( 'NONE', *, *, #368, .T. ) ;
+#217 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#218 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, -1.190944881889763000, 0.0000000000000000000 ) ) ;
+#220 = DIRECTION ( 'NONE',  ( -0.7071067811865479100, -0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#221 = VERTEX_POINT ( 'NONE', #157 ) ;
+#222 = SURFACE_STYLE_USAGE ( .BOTH. , #40 ) ;
+#223 = CIRCLE ( 'NONE', #286, 0.1968503937007875800 ) ;
+#224 = ORIENTED_EDGE ( 'NONE', *, *, #365, .F. ) ;
+#225 = ORIENTED_EDGE ( 'NONE', *, *, #128, .T. ) ;
+#226 = PRESENTATION_STYLE_ASSIGNMENT (( #232 ) ) ;
+#227 = VERTEX_POINT ( 'NONE', #21 ) ;
+#228 = CARTESIAN_POINT ( 'NONE',  ( -3.740792623945913100, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#229 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#230 = LINE ( 'NONE', #269, #96 ) ;
+#231 = CARTESIAN_POINT ( 'NONE',  ( -3.434899080359899800, -1.190944881889763000, 0.3937007874015748300 ) ) ;
+#232 = SURFACE_STYLE_USAGE ( .BOTH. , #49 ) ;
+#233 = FACE_BOUND ( 'NONE', #377, .T. ) ;
+#234 = AXIS2_PLACEMENT_3D ( 'NONE', #336, #378, #184 ) ;
+#235 = ORIENTED_EDGE ( 'NONE', *, *, #338, .T. ) ;
+#236 = EDGE_CURVE ( 'NONE', #163, #151, #178, .T. ) ;
+#237 = CIRCLE ( 'NONE', #300, 0.1181102362204725500 ) ;
+#238 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ;
+#239 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#240 = ADVANCED_FACE ( 'NONE', ( #326 ), #90, .T. ) ;
+#241 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#242 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#243 = VECTOR ( 'NONE', #293, 39.37007874015748100 ) ;
+#244 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#245 = VERTEX_POINT ( 'NONE', #337 ) ;
+#246 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#248 = ORIENTED_EDGE ( 'NONE', *, *, #390, .F. ) ;
+#249 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, -1.190944881889763000, 0.3937007874015748300 ) ) ;
+#250 = VECTOR ( 'NONE', #1, 39.37007874015748100 ) ;
+#251 =( CONVERSION_BASED_UNIT ( 'INCH', #392 ) LENGTH_UNIT ( ) NAMED_UNIT ( #118 ) );
+#252 = CYLINDRICAL_SURFACE ( 'NONE', #312, 0.1968503937007875800 ) ;
+#253 = VERTEX_POINT ( 'NONE', #381 ) ;
+#254 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#255 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #259, 'distance_accuracy_value', 'NONE');
+#256 = LINE ( 'NONE', #341, #47 ) ;
+#257 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#258 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#259 =( CONVERSION_BASED_UNIT ( 'INCH', #80 ) LENGTH_UNIT ( ) NAMED_UNIT ( #271 ) );
+#260 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #32 ) ) ;
+#261 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #32, .NOT_KNOWN. ) ;
+#262 = CARTESIAN_POINT ( 'NONE',  ( -0.8910656033115380600, 0.8910656033115387200, 0.3937007874015748300 ) ) ;
+#263 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #261, #357 ) ;
+#264 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#265 = CIRCLE ( 'NONE', #323, 0.1968503937007875800 ) ;
+#266 = AXIS2_PLACEMENT_3D ( 'NONE', #244, #320, #148 ) ;
+#267 = ORIENTED_EDGE ( 'NONE', *, *, #348, .F. ) ;
+#268 = DIRECTION ( 'NONE',  ( 0.7071067811865472400, -0.7071067811865479100, 0.0000000000000000000 ) ) ;
+#269 = CARTESIAN_POINT ( 'NONE',  ( -0.8910656033115380600, 0.8910656033115387200, 0.3937007874015748300 ) ) ;
+#270 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #9 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #251, #95, #282 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#271 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#272 = ORIENTED_EDGE ( 'NONE', *, *, #355, .F. ) ;
+#273 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #278 ), #270 ) ;
+#274 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.643700787401574300, 0.0000000000000000000 ) ) ;
+#275 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #278 ) ) ;
+#276 = ORIENTED_EDGE ( 'NONE', *, *, #359, .F. ) ;
+#277 = CARTESIAN_POINT ( 'NONE',  ( -3.504572151504967700, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#278 = STYLED_ITEM ( 'NONE', ( #83 ), #200 ) ;
+#279 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#280 =( CONVERSION_BASED_UNIT ( 'INCH', #102 ) LENGTH_UNIT ( ) NAMED_UNIT ( #172 ) );
+#281 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ;
+#282 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#283 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #137 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #280, #125, #319 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#284 = VECTOR ( 'NONE', #122, 39.37007874015748100 ) ;
+#285 = MANIFOLD_SOLID_BREP ( 'Fillet5', #364 ) ;
+#286 = AXIS2_PLACEMENT_3D ( 'NONE', #62, #246, #91 ) ;
+#287 = EDGE_LOOP ( 'NONE', ( #216, #181, #248, #72 ) ) ;
+#288 = AXIS2_PLACEMENT_3D ( 'NONE', #174, #7, #198 ) ;
+#289 = AXIS2_PLACEMENT_3D ( 'NONE', #274, #121, #314 ) ;
+#290 = AXIS2_PLACEMENT_3D ( 'NONE', #36, #218, #61 ) ;
+#291 = AXIS2_PLACEMENT_3D ( 'NONE', #195, #34, #217 ) ;
+#292 = ORIENTED_EDGE ( 'NONE', *, *, #370, .F. ) ;
+#293 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#294 = PLANE ( 'NONE',  #234 ) ;
+#295 = AXIS2_PLACEMENT_3D ( 'NONE', #310, #142, #352 ) ;
+#296 = AXIS2_PLACEMENT_3D ( 'NONE', #58, #241, #89 ) ;
+#297 = LINE ( 'NONE', #219, #74 ) ;
+#298 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#299 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#300 = AXIS2_PLACEMENT_3D ( 'NONE', #171, #4, #192 ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #257, #73, #229 ) ;
+#302 = AXIS2_PLACEMENT_3D ( 'NONE', #46, #376, #183 ) ;
+#303 = ORIENTED_EDGE ( 'NONE', *, *, #356, .F. ) ;
+#304 = AXIS2_PLACEMENT_3D ( 'NONE', #262, #268, #114 ) ;
+#305 = VECTOR ( 'NONE', #242, 39.37007874015748100 ) ;
+#306 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #239, #86 ) ;
+#307 = ADVANCED_FACE ( 'NONE', ( #136 ), #106, .F. ) ;
+#308 = ORIENTED_EDGE ( 'NONE', *, *, #355, .T. ) ;
+#309 = AXIS2_PLACEMENT_3D ( 'NONE', #330, #206, #19 ) ;
+#310 = CARTESIAN_POINT ( 'NONE',  ( -3.753258166873290900, -1.446850393700787100, 0.3937007874015748300 ) ) ;
+#311 = EDGE_LOOP ( 'NONE', ( #97, #143, #272, #197, #16, #204, #129 ) ) ;
+#312 = AXIS2_PLACEMENT_3D ( 'NONE', #339, #279, #264 ) ;
+#313 = VECTOR ( 'NONE', #258, 39.37007874015748100 ) ;
+#314 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#315 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #98, #84 ) ;
+#316 = ORIENTED_EDGE ( 'NONE', *, *, #344, .T. ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, -1.190944881889763000, 0.0000000000000000000 ) ) ;
+#318 = EDGE_CURVE ( 'NONE', #207, #329, #373, .T. ) ;
+#319 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#320 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#321 = CIRCLE ( 'NONE', #291, 0.1968503937007875800 ) ;
+#322 = AXIS2_PLACEMENT_3D ( 'NONE', #347, #82, #42 ) ;
+#323 = AXIS2_PLACEMENT_3D ( 'NONE', #343, #165, #385 ) ;
+#324 = ORIENTED_EDGE ( 'NONE', *, *, #344, .F. ) ;
+#325 = AXIS2_PLACEMENT_3D ( 'NONE', #185, #162, #382 ) ;
+#326 = FACE_OUTER_BOUND ( 'NONE', #39, .T. ) ;
+#327 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #124, #93 ) ;
+#328 = AXIS2_PLACEMENT_3D ( 'NONE', #384, #188, #26 ) ;
+#329 = VERTEX_POINT ( 'NONE', #78 ) ;
+#330 = CARTESIAN_POINT ( 'NONE',  ( -3.753258166873290900, -1.446850393700787100, -0.2362204724409451600 ) ) ;
+#331 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #150 ) ) ;
+#332 = AXIS2_PLACEMENT_3D ( 'NONE', #371, #17, #254 ) ;
+#333 = ORIENTED_EDGE ( 'NONE', *, *, #362, .T. ) ;
+#334 = CARTESIAN_POINT ( 'NONE',  ( -3.434899080359899800, -1.190944881889763000, 0.3937007874015748300 ) ) ;
+#335 = LINE ( 'NONE', #349, #175 ) ;
+#336 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.3937007874015748300 ) ) ;
+#337 = CARTESIAN_POINT ( 'NONE',  ( -3.731495537015316000, -1.414041994750655700, 0.3937007874015748300 ) ) ;
+#338 = EDGE_CURVE ( 'NONE', #253, #28, #55, .T. ) ;
+#339 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.643700787401574300, -0.2362204724409451600 ) ) ;
+#340 = CYLINDRICAL_SURFACE ( 'NONE', #309, 0.03937007874015751400 ) ;
+#341 = CARTESIAN_POINT ( 'NONE',  ( -3.504572151504967700, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#342 = EDGE_CURVE ( 'NONE', #99, #170, #131, .T. ) ;
+#343 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#344 = EDGE_CURVE ( 'NONE', #127, #99, #201, .T. ) ;
+#345 = EDGE_CURVE ( 'NONE', #391, #170, #256, .T. ) ;
+#346 = FACE_OUTER_BOUND ( 'NONE', #287, .T. ) ;
+#347 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.3937007874015748300 ) ) ;
+#348 = EDGE_CURVE ( 'NONE', #51, #245, #265, .T. ) ;
+#349 = CARTESIAN_POINT ( 'NONE',  ( -3.731495537015316000, -1.414041994750655700, 0.3937007874015748300 ) ) ;
+#350 = EDGE_CURVE ( 'NONE', #127, #391, #126, .T. ) ;
+#351 = ADVANCED_FACE ( 'NONE', ( #346 ), #79, .T. ) ;
+#352 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 1.387778780781444600E-014, 0.0000000000000000000 ) ) ;
+#353 = EDGE_CURVE ( 'NONE', #51, #138, #41, .T. ) ;
+#354 = FACE_OUTER_BOUND ( 'NONE', #213, .T. ) ;
+#355 = EDGE_CURVE ( 'NONE', #138, #5, #182, .T. ) ;
+#356 = EDGE_CURVE ( 'NONE', #5, #245, #335, .T. ) ;
+#357 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #176, 'design' ) ;
+#358 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#359 = EDGE_CURVE ( 'NONE', #391, #127, #237, .T. ) ;
+#360 = VECTOR ( 'NONE', #108, 39.37007874015748100 ) ;
+#361 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #11 ) ;
+#362 = EDGE_CURVE ( 'NONE', #151, #51, #104, .T. ) ;
+#363 = PRODUCT_CONTEXT ( 'NONE', #11, 'mechanical' ) ;
+#364 = CLOSED_SHELL ( 'NONE', ( #31, #193, #215, #140, #240, #351, #307, #59, #3, #88, #116 ) ) ;
+#365 = EDGE_CURVE ( 'NONE', #245, #207, #29, .T. ) ;
+#366 = CYLINDRICAL_SURFACE ( 'NONE', #327, 0.1181102362204725500 ) ;
+#367 = EDGE_CURVE ( 'NONE', #207, #221, #321, .T. ) ;
+#368 = EDGE_CURVE ( 'NONE', #253, #221, #230, .T. ) ;
+#369 = EDGE_CURVE ( 'NONE', #253, #105, #113, .T. ) ;
+#370 = EDGE_CURVE ( 'NONE', #151, #105, #20, .T. ) ;
+#371 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.190944881889763000, 0.0000000000000000000 ) ) ;
+#372 = ORIENTED_EDGE ( 'NONE', *, *, #353, .F. ) ;
+#373 = LINE ( 'NONE', #25, #65 ) ;
+#374 = CARTESIAN_POINT ( 'NONE',  ( -3.740792623945913100, -1.249999999999999600, 0.0000000000000000000 ) ) ;
+#375 = EDGE_CURVE ( 'NONE', #170, #99, #168, .T. ) ;
+#376 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#377 = EDGE_LOOP ( 'NONE', ( #64, #276 ) ) ;
+#378 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#379 = EDGE_CURVE ( 'NONE', #329, #227, #85, .T. ) ;
+#380 = EDGE_CURVE ( 'NONE', #329, #5, #14, .T. ) ;
+#381 = CARTESIAN_POINT ( 'NONE',  ( -3.032131206623078300, -1.249999999999999300, 0.3937007874015748300 ) ) ;
+#382 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#383 = EDGE_CURVE ( 'NONE', #163, #138, #223, .T. ) ;
+#384 = CARTESIAN_POINT ( 'NONE',  ( -3.622682387725440400, -1.249999999999999600, 0.0000000000000000000 ) ) ;
+#385 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#386 = EDGE_CURVE ( 'NONE', #15, #163, #297, .T. ) ;
+#387 = ORIENTED_EDGE ( 'NONE', *, *, #345, .F. ) ;
+#388 = EDGE_CURVE ( 'NONE', #227, #221, #214, .T. ) ;
+#389 = EDGE_CURVE ( 'NONE', #28, #15, #2, .T. ) ;
+#390 = EDGE_CURVE ( 'NONE', #28, #227, #210, .T. ) ;
+#391 = VERTEX_POINT ( 'NONE', #277 ) ;
+#392 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #67 );
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Lifter_Pin.step

@@ -0,0 +1,166 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Lifter_Pin.step',
+    '2014-05-14T06:09:37',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = FILL_AREA_STYLE_COLOUR ( '', #117 ) ;
+#2 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #77 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #47, #124, #55 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#3 = FILL_AREA_STYLE ('',( #1 ) ) ;
+#4 = FACE_OUTER_BOUND ( 'NONE', #7, .T. ) ;
+#5 = FILL_AREA_STYLE ('',( #68 ) ) ;
+#6 = CIRCLE ( 'NONE', #44, 0.1181102362204724700 ) ;
+#7 = EDGE_LOOP ( 'NONE', ( #97, #113, #82, #19 ) ) ;
+#8 = VECTOR ( 'NONE', #74, 39.37007874015748100 ) ;
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #132, .T. ) ;
+#10 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724700, 1.446433227339393800E-017, 0.0000000000000000000 ) ) ;
+#11 = LINE ( 'NONE', #59, #8 ) ;
+#12 = ORIENTED_EDGE ( 'NONE', *, *, #88, .T. ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#14 = SURFACE_STYLE_USAGE ( .BOTH. , #79 ) ;
+#15 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#16 = PLANE ( 'NONE',  #18 ) ;
+#17 = PRESENTATION_STYLE_ASSIGNMENT (( #14 ) ) ;
+#18 = AXIS2_PLACEMENT_3D ( 'NONE', #39, #49, #15 ) ;
+#19 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ;
+#20 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #96 ), #2 ) ;
+#21 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#22 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#23 = FACE_OUTER_BOUND ( 'NONE', #43, .T. ) ;
+#24 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#25 =( CONVERSION_BASED_UNIT ( 'INCH', #107 ) LENGTH_UNIT ( ) NAMED_UNIT ( #118 ) );
+#26 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.062992125984252100 ) ) ;
+#27 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724700, 0.0000000000000000000, 1.062992125984252100 ) ) ;
+#28 = EDGE_CURVE ( 'NONE', #33, #72, #32, .T. ) ;
+#29 = VECTOR ( 'NONE', #40, 39.37007874015748100 ) ;
+#30 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#31 = CYLINDRICAL_SURFACE ( 'NONE', #136, 0.1181102362204724700 ) ;
+#32 = LINE ( 'NONE', #27, #29 ) ;
+#33 = VERTEX_POINT ( 'NONE', #140 ) ;
+#34 = SURFACE_STYLE_FILL_AREA ( #5 ) ;
+#35 = ORIENTED_EDGE ( 'NONE', *, *, #122, .T. ) ;
+#36 = SURFACE_STYLE_USAGE ( .BOTH. , #103 ) ;
+#37 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#38 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#39 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.062992125984252100 ) ) ;
+#40 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#41 = CLOSED_SHELL ( 'NONE', ( #87, #148, #90, #94 ) ) ;
+#42 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #145 ) ;
+#43 = EDGE_LOOP ( 'NONE', ( #12, #35 ) ) ;
+#44 = AXIS2_PLACEMENT_3D ( 'NONE', #26, #58, #128 ) ;
+#45 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#46 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#47 =( CONVERSION_BASED_UNIT ( 'INCH', #63 ) LENGTH_UNIT ( ) NAMED_UNIT ( #70 ) );
+#48 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#49 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#50 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#51 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#52 = ORIENTED_EDGE ( 'NONE', *, *, #76, .F. ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.062992125984252100 ) ) ;
+#54 = EDGE_LOOP ( 'NONE', ( #52, #91, #60, #9 ) ) ;
+#55 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#56 = PRODUCT_CONTEXT ( 'NONE', #137, 'mechanical' ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#58 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#59 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724700, 1.446433227339393800E-017, 1.062992125984252100 ) ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #28, .T. ) ;
+#61 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #96 ) ) ;
+#62 = ORIENTED_EDGE ( 'NONE', *, *, #100, .F. ) ;
+#63 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #112 );
+#64 = VERTEX_POINT ( 'NONE', #80 ) ;
+#65 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.062992125984252100 ) ) ;
+#67 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #134 ) ) ;
+#68 = FILL_AREA_STYLE_COLOUR ( '', #45 ) ;
+#69 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #138 ) ;
+#70 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#71 = PLANE ( 'NONE',  #129 ) ;
+#72 = VERTEX_POINT ( 'NONE', #57 ) ;
+#73 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #138, 'design' ) ;
+#74 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#75 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#76 = EDGE_CURVE ( 'NONE', #64, #101, #11, .T. ) ;
+#77 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #47, 'distance_accuracy_value', 'NONE');
+#78 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#79 = SURFACE_SIDE_STYLE ('',( #34 ) ) ;
+#80 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724700, 1.446433227339393800E-017, 1.062992125984252100 ) ) ;
+#81 = ORIENTED_EDGE ( 'NONE', *, *, #132, .F. ) ;
+#82 = ORIENTED_EDGE ( 'NONE', *, *, #100, .T. ) ;
+#83 = PRODUCT ( 'Lifter_Pin', 'Lifter_Pin', '', ( #56 ) ) ;
+#84 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #104, 'distance_accuracy_value', 'NONE');
+#85 = SURFACE_STYLE_FILL_AREA ( #3 ) ;
+#86 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Lifter_Pin', ( #133, #141 ), #116 ) ;
+#87 = ADVANCED_FACE ( 'NONE', ( #4 ), #149, .T. ) ;
+#88 = EDGE_CURVE ( 'NONE', #33, #64, #6, .T. ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#90 = ADVANCED_FACE ( 'NONE', ( #23 ), #16, .T. ) ;
+#91 = ORIENTED_EDGE ( 'NONE', *, *, #88, .F. ) ;
+#92 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#93 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#94 = ADVANCED_FACE ( 'NONE', ( #130 ), #71, .F. ) ;
+#95 = PRESENTATION_STYLE_ASSIGNMENT (( #36 ) ) ;
+#96 = STYLED_ITEM ( 'NONE', ( #95 ), #133 ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #122, .F. ) ;
+#98 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#99 = EDGE_LOOP ( 'NONE', ( #81, #62 ) ) ;
+#100 = EDGE_CURVE ( 'NONE', #101, #72, #144, .T. ) ;
+#101 = VERTEX_POINT ( 'NONE', #10 ) ;
+#102 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#103 = SURFACE_SIDE_STYLE ('',( #85 ) ) ;
+#104 =( CONVERSION_BASED_UNIT ( 'INCH', #143 ) LENGTH_UNIT ( ) NAMED_UNIT ( #50 ) );
+#105 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#106 = AXIS2_PLACEMENT_3D ( 'NONE', #89, #21, #102 ) ;
+#107 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #93 );
+#108 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #98, #75 ) ;
+#109 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #92, #22 ) ;
+#110 = CIRCLE ( 'NONE', #109, 0.1181102362204724700 ) ;
+#111 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#112 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#113 = ORIENTED_EDGE ( 'NONE', *, *, #76, .T. ) ;
+#114 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#115 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #25, 'distance_accuracy_value', 'NONE');
+#116 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #84 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #104, #37, #114 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#117 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#118 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#119 = CIRCLE ( 'NONE', #121, 0.1181102362204724700 ) ;
+#120 = FACE_OUTER_BOUND ( 'NONE', #54, .T. ) ;
+#121 = AXIS2_PLACEMENT_3D ( 'NONE', #53, #135, #65 ) ;
+#122 = EDGE_CURVE ( 'NONE', #64, #33, #119, .T. ) ;
+#123 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#124 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#125 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #137 ) ;
+#126 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#127 = SHAPE_DEFINITION_REPRESENTATION ( #42, #86 ) ;
+#128 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#129 = AXIS2_PLACEMENT_3D ( 'NONE', #51, #30, #46 ) ;
+#130 = FACE_OUTER_BOUND ( 'NONE', #99, .T. ) ;
+#131 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #134 ), #139 ) ;
+#132 = EDGE_CURVE ( 'NONE', #72, #101, #110, .T. ) ;
+#133 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #41 ) ;
+#134 = STYLED_ITEM ( 'NONE', ( #17 ), #86 ) ;
+#135 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#136 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #123, #78 ) ;
+#137 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#138 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#139 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #115 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #25, #105, #38 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#140 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724700, 0.0000000000000000000, 1.062992125984252100 ) ) ;
+#141 = AXIS2_PLACEMENT_3D ( 'NONE', #111, #48, #126 ) ;
+#142 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.062992125984252100 ) ) ;
+#143 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #24 );
+#144 = CIRCLE ( 'NONE', #106, 0.1181102362204724700 ) ;
+#145 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #146, #73 ) ;
+#146 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #83, .NOT_KNOWN. ) ;
+#147 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #83 ) ) ;
+#148 = ADVANCED_FACE ( 'NONE', ( #120 ), #31, .T. ) ;
+#149 = CYLINDRICAL_SURFACE ( 'NONE', #108, 0.1181102362204724700 ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Mag_Catch.step

@@ -0,0 +1,832 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Mag_Catch.step',
+    '2014-05-14T06:09:07',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = VECTOR ( 'NONE', #555, 39.37007874015748100 ) ;
+#2 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#3 = VECTOR ( 'NONE', #180, 39.37007874015748100 ) ;
+#4 = ORIENTED_EDGE ( 'NONE', *, *, #66, .T. ) ;
+#5 = ORIENTED_EDGE ( 'NONE', *, *, #688, .T. ) ;
+#6 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 1.404115950663606400E-017, 0.0000000000000000000 ) ) ;
+#7 = CARTESIAN_POINT ( 'NONE',  ( -1.087000000149333400, 2.036950777247081800, 0.1130000000000000300 ) ) ;
+#8 = AXIS2_PLACEMENT_3D ( 'NONE', #561, #190, #622 ) ;
+#9 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#10 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#11 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#12 = LINE ( 'NONE', #522, #642 ) ;
+#13 = PLANE ( 'NONE',  #457 ) ;
+#14 = CIRCLE ( 'NONE', #410, 0.09000000000000002400 ) ;
+#15 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#16 = CARTESIAN_POINT ( 'NONE',  ( -0.7375000000746682000, 0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#17 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#18 = ORIENTED_EDGE ( 'NONE', *, *, #686, .F. ) ;
+#19 = ORIENTED_EDGE ( 'NONE', *, *, #714, .F. ) ;
+#20 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#21 = CARTESIAN_POINT ( 'NONE',  ( -1.095000000000000000, 0.0000000000000000000, -0.1749999999999999900 ) ) ;
+#22 = EDGE_LOOP ( 'NONE', ( #321, #485 ) ) ;
+#23 = EDGE_CURVE ( 'NONE', #431, #533, #430, .T. ) ;
+#24 = CARTESIAN_POINT ( 'NONE',  ( -1.147500000074666900, -0.1230000000000000300, 0.05250000007466726300 ) ) ;
+#25 = VECTOR ( 'NONE', #9, 39.37007874015748100 ) ;
+#26 = LINE ( 'NONE', #424, #323 ) ;
+#27 = AXIS2_PLACEMENT_3D ( 'NONE', #754, #376, #11 ) ;
+#28 = ADVANCED_FACE ( 'NONE', ( #511, #596 ), #377, .F. ) ;
+#29 = VERTEX_POINT ( 'NONE', #435 ) ;
+#30 = VERTEX_POINT ( 'NONE', #759 ) ;
+#31 = ADVANCED_FACE ( 'NONE', ( #249 ), #13, .T. ) ;
+#32 = EDGE_LOOP ( 'NONE', ( #609, #797, #350, #343, #334 ) ) ;
+#33 = PLANE ( 'NONE',  #394 ) ;
+#34 = ORIENTED_EDGE ( 'NONE', *, *, #177, .F. ) ;
+#35 = LINE ( 'NONE', #273, #645 ) ;
+#36 = ORIENTED_EDGE ( 'NONE', *, *, #521, .T. ) ;
+#37 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -3.529886928867522000E-016 ) ) ;
+#38 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.08999999999999999700, 0.02185039370078743400 ) ) ;
+#39 = ORIENTED_EDGE ( 'NONE', *, *, #595, .F. ) ;
+#40 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#41 = LINE ( 'NONE', #614, #385 ) ;
+#42 = CIRCLE ( 'NONE', #147, 0.1181102362204724800 ) ;
+#43 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #317, 'distance_accuracy_value', 'NONE');
+#44 = EDGE_LOOP ( 'NONE', ( #576, #262, #390, #466 ) ) ;
+#45 = AXIS2_PLACEMENT_3D ( 'NONE', #311, #756, #378 ) ;
+#46 = VERTEX_POINT ( 'NONE', #438 ) ;
+#47 = EDGE_LOOP ( 'NONE', ( #208, #122, #712, #500 ) ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #554, #184 ) ;
+#49 = COLOUR_RGB ( '',1.000000000000000000, 0.9490196078431372100, 0.9098039215686274400 ) ;
+#50 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude8', #364 ) ;
+#51 = ORIENTED_EDGE ( 'NONE', *, *, #658, .F. ) ;
+#52 = AXIS2_PLACEMENT_3D ( 'NONE', #232, #418, #58 ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( -0.7870000000000001400, 0.0000000000000000000, 0.1130000000000000300 ) ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #714, .T. ) ;
+#55 = CARTESIAN_POINT ( 'NONE',  ( -0.2375000000746681500, 0.1230000000000000100, -0.2999999999999999900 ) ) ;
+#56 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( -0.3625000000746681500, 0.0000000000000000000, -0.2999999999999999900 ) ) ;
+#58 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#59 = VECTOR ( 'NONE', #552, 39.37007874015748100 ) ;
+#60 = LINE ( 'NONE', #739, #673 ) ;
+#61 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.897116662266849000E-016, -1.000000000000000000 ) ) ;
+#62 = CARTESIAN_POINT ( 'NONE',  ( -1.084780223066344600, 0.3730000000000000000, -0.05688976377952749400 ) ) ;
+#63 = VERTEX_POINT ( 'NONE', #501 ) ;
+#64 = CARTESIAN_POINT ( 'NONE',  ( -0.2809999998933333500, -0.1230000000000000300, 0.02185039370078740000 ) ) ;
+#65 = VERTEX_POINT ( 'NONE', #76 ) ;
+#66 = EDGE_CURVE ( 'NONE', #241, #295, #663, .T. ) ;
+#67 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#68 = CIRCLE ( 'NONE', #219, 0.1181102362204724100 ) ;
+#69 = VERTEX_POINT ( 'NONE', #568 ) ;
+#70 = CARTESIAN_POINT ( 'NONE',  ( -1.094999999987386100, 0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#71 = ORIENTED_EDGE ( 'NONE', *, *, #535, .T. ) ;
+#72 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, 0.1269999999999999700, -0.3590551181102361000 ) ) ;
+#73 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#74 = VERTEX_POINT ( 'NONE', #196 ) ;
+#75 = EDGE_CURVE ( 'NONE', #401, #426, #189, .T. ) ;
+#76 = CARTESIAN_POINT ( 'NONE',  ( -0.1125000000746681900, 0.1230000000000000100, -0.1749999999999999900 ) ) ;
+#77 = VERTEX_POINT ( 'NONE', #320 ) ;
+#78 = CYLINDRICAL_SURFACE ( 'NONE', #290, 0.09000000000000002400 ) ;
+#79 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#80 = FACE_OUTER_BOUND ( 'NONE', #538, .T. ) ;
+#81 = CARTESIAN_POINT ( 'NONE',  ( -0.1125000000746681900, 0.0000000000000000000, -0.1749999999999999900 ) ) ;
+#82 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#83 = ORIENTED_EDGE ( 'NONE', *, *, #535, .F. ) ;
+#84 = CARTESIAN_POINT ( 'NONE',  ( -1.727062619316236400E-018, -0.1230000000000000300, -0.4249999999999999900 ) ) ;
+#85 = ORIENTED_EDGE ( 'NONE', *, *, #696, .F. ) ;
+#86 = ADVANCED_FACE ( 'NONE', ( #167 ), #386, .T. ) ;
+#87 = LINE ( 'NONE', #24, #553 ) ;
+#88 = EDGE_CURVE ( 'NONE', #281, #676, #336, .T. ) ;
+#89 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#90 = ORIENTED_EDGE ( 'NONE', *, *, #563, .T. ) ;
+#91 = EDGE_LOOP ( 'NONE', ( #657, #145 ) ) ;
+#92 = CYLINDRICAL_SURFACE ( 'NONE', #52, 0.1181102362204724100 ) ;
+#93 = VECTOR ( 'NONE', #589, 39.37007874015748100 ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000000000200, 0.1230000000000000300, 0.02185039370078740000 ) ) ;
+#95 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #419, #362, #239, #674 ),
+ .UNSPECIFIED., .F., .T. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 0.0000000000000000000, 1.421303970109269600 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8386244859732446800, 0.8386244859732446800, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#96 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000000000200, -2.370107171140580200E-033, 0.02185039370078740000 ) ) ;
+#97 = EDGE_CURVE ( 'NONE', #285, #328, #35, .T. ) ;
+#98 = EDGE_LOOP ( 'NONE', ( #227, #382, #375, #693, #125, #205, #326, #442, #745, #779, #370, #631, #4 ) ) ;
+#99 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, 0.1269999999999999700, -0.1228346456692912500 ) ) ;
+#100 = LINE ( 'NONE', #699, #577 ) ;
+#101 = AXIS2_PLACEMENT_3D ( 'NONE', #429, #67, #488 ) ;
+#102 = ORIENTED_EDGE ( 'NONE', *, *, #572, .F. ) ;
+#103 = VERTEX_POINT ( 'NONE', #458 ) ;
+#104 = CARTESIAN_POINT ( 'NONE',  ( -1.087000000000000000, -0.1230000000000000300, 0.1600000000000000300 ) ) ;
+#105 = CARTESIAN_POINT ( 'NONE',  ( 1.102182119232618200E-017, -0.09000000000000006600, 0.02185039370078743400 ) ) ;
+#106 = ORIENTED_EDGE ( 'NONE', *, *, #510, .T. ) ;
+#107 = LINE ( 'NONE', #115, #234 ) ;
+#108 = LINE ( 'NONE', #406, #404 ) ;
+#109 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#110 = AXIS2_PLACEMENT_3D ( 'NONE', #304, #747, #369 ) ;
+#111 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000000000200, 0.1230000000000000300, 0.02185039370078740000 ) ) ;
+#112 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.897116662266849000E-016, -1.000000000000000000 ) ) ;
+#113 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
+#114 = CARTESIAN_POINT ( 'NONE',  ( -0.8340000000000001900, -0.1230000000000000300, 0.1130000000000000300 ) ) ;
+#115 = CARTESIAN_POINT ( 'NONE',  ( -0.4870000000000000400, 0.1230000000000000300, 0.1200000000000000200 ) ) ;
+#116 = EDGE_CURVE ( 'NONE', #77, #275, #14, .T. ) ;
+#117 = LINE ( 'NONE', #81, #246 ) ;
+#118 = CIRCLE ( 'NONE', #8, 0.1181102362204724800 ) ;
+#119 = CARTESIAN_POINT ( 'NONE',  ( 2.008144335517134500E-017, 0.1230000000000000300, -0.05688976377952704300 ) ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( -0.3625000000746681500, -0.1230000000000000300, -0.4249999999999999900 ) ) ;
+#121 = VERTEX_POINT ( 'NONE', #519 ) ;
+#122 = ORIENTED_EDGE ( 'NONE', *, *, #696, .T. ) ;
+#123 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, -0.1230000000000000300, -0.3590551181102361000 ) ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, -0.1230000000000000300, -0.2409448818897636800 ) ) ;
+#125 = ORIENTED_EDGE ( 'NONE', *, *, #616, .F. ) ;
+#126 = CARTESIAN_POINT ( 'NONE',  ( -0.9666699868458719100, -0.8871025170275345100, -0.1749999999999999900 ) ) ;
+#127 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.7071067811865476800, 0.7071067811865473500 ) ) ;
+#128 = LINE ( 'NONE', #229, #440 ) ;
+#129 = FILL_AREA_STYLE_COLOUR ( '', #271 ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #780, .T. ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( -0.8625000000746682000, 0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#132 = VECTOR ( 'NONE', #213, 39.37007874015748100 ) ;
+#133 = CARTESIAN_POINT ( 'NONE',  ( -1.084780223066344600, 0.6863329649273394200, -0.05688976377952743200 ) ) ;
+#134 = AXIS2_PLACEMENT_3D ( 'NONE', #681, #10, #433 ) ;
+#135 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#136 = EDGE_LOOP ( 'NONE', ( #566, #299, #470, #168 ) ) ;
+#137 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#138 = ORIENTED_EDGE ( 'NONE', *, *, #650, .F. ) ;
+#139 = CARTESIAN_POINT ( 'NONE',  ( 1.727062619367752900E-018, 0.1230000000000000100, -0.4249999999999999900 ) ) ;
+#140 = AXIS2_PLACEMENT_3D ( 'NONE', #170, #236, #724 ) ;
+#141 = CIRCLE ( 'NONE', #253, 0.09000000000000002400 ) ;
+#142 = LINE ( 'NONE', #70, #453 ) ;
+#143 = ADVANCED_FACE ( 'NONE', ( #315, #473 ), #33, .F. ) ;
+#144 = VERTEX_POINT ( 'NONE', #641 ) ;
+#145 = ORIENTED_EDGE ( 'NONE', *, *, #688, .F. ) ;
+#146 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #358, #407 ) ;
+#147 = AXIS2_PLACEMENT_3D ( 'NONE', #677, #303, #746 ) ;
+#148 = ADVANCED_FACE ( 'NONE', ( #151 ), #293, .T. ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( -1.095000000000000000, -0.1230000000000000300, 0.0000000000000000000 ) ) ;
+#150 = LINE ( 'NONE', #94, #803 ) ;
+#151 = FACE_OUTER_BOUND ( 'NONE', #32, .T. ) ;
+#152 = AXIS2_PLACEMENT_3D ( 'NONE', #114, #548, #176 ) ;
+#153 = ORIENTED_EDGE ( 'NONE', *, *, #510, .F. ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( -0.9370000000000001700, 0.08300000000000003200, 0.1600000000000000300 ) ) ;
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #729, .T. ) ;
+#156 = LINE ( 'NONE', #690, #467 ) ;
+#157 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#158 = VECTOR ( 'NONE', #753, 39.37007874015748100 ) ;
+#159 = VERTEX_POINT ( 'NONE', #586 ) ;
+#160 = EDGE_LOOP ( 'NONE', ( #580, #233, #138, #305 ) ) ;
+#161 = AXIS2_PLACEMENT_3D ( 'NONE', #476, #109, #543 ) ;
+#162 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#163 = EDGE_CURVE ( 'NONE', #46, #551, #804, .T. ) ;
+#164 = AXIS2_PLACEMENT_3D ( 'NONE', #594, #231, #667 ) ;
+#165 = EDGE_CURVE ( 'NONE', #29, #63, #626, .T. ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000236584600, -0.1230000000000000400, -0.1749999999999999900 ) ) ;
+#167 = FACE_OUTER_BOUND ( 'NONE', #371, .T. ) ;
+#168 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
+#169 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#170 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1600000000000000300 ) ) ;
+#171 = VERTEX_POINT ( 'NONE', #463 ) ;
+#172 = CIRCLE ( 'NONE', #27, 0.09000000000000002400 ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, -0.1230000000000000300, -0.1228346456692912500 ) ) ;
+#174 = LINE ( 'NONE', #64, #653 ) ;
+#175 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #530, #157 ) ;
+#176 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#177 = EDGE_CURVE ( 'NONE', #318, #266, #12, .T. ) ;
+#178 = VERTEX_POINT ( 'NONE', #38 ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #607, .F. ) ;
+#180 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 3.529886928867521100E-016 ) ) ;
+#181 = AXIS2_PLACEMENT_3D ( 'NONE', #651, #280, #723 ) ;
+#182 = EDGE_CURVE ( 'NONE', #328, #121, #150, .T. ) ;
+#183 = ORIENTED_EDGE ( 'NONE', *, *, #601, .F. ) ;
+#184 = DIRECTION ( 'NONE',  ( 0.7071067811865512400, 0.0000000000000000000, 0.7071067811865438000 ) ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #550, .T. ) ;
+#186 = DIRECTION ( 'NONE',  ( 1.498551724237046400E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#187 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#188 = AXIS2_PLACEMENT_3D ( 'NONE', #405, #40, #465 ) ;
+#189 = LINE ( 'NONE', #133, #752 ) ;
+#190 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#191 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000473168600, -0.1230000000000000300, 0.08000000000000001600 ) ) ;
+#193 = ORIENTED_EDGE ( 'NONE', *, *, #616, .T. ) ;
+#194 = FILL_AREA_STYLE ('',( #692 ) ) ;
+#195 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -2.620859199958414600E-017, 0.02185039370078743400 ) ) ;
+#196 = CARTESIAN_POINT ( 'NONE',  ( -0.7869999999360000100, 0.1230000000000000300, 0.1130000000000000300 ) ) ;
+#197 = AXIS2_PLACEMENT_3D ( 'NONE', #450, #400, #37 ) ;
+#198 = VERTEX_POINT ( 'NONE', #131 ) ;
+#199 = LINE ( 'NONE', #751, #344 ) ;
+#200 = CYLINDRICAL_SURFACE ( 'NONE', #140, 0.09000000000000002400 ) ;
+#201 = PLANE ( 'NONE',  #197 ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #800, .F. ) ;
+#203 = ADVANCED_FACE ( 'NONE', ( #312 ), #402, .T. ) ;
+#204 = EDGE_LOOP ( 'NONE', ( #527, #289 ) ) ;
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #556, .F. ) ;
+#206 = ADVANCED_FACE ( 'NONE', ( #471 ), #661, .F. ) ;
+#207 = AXIS2_PLACEMENT_3D ( 'NONE', #648, #279, #721 ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #764, .F. ) ;
+#209 = AXIS2_PLACEMENT_3D ( 'NONE', #573, #324, #772 ) ;
+#210 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#211 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #763, 'distance_accuracy_value', 'NONE');
+#212 = VERTEX_POINT ( 'NONE', #226 ) ;
+#213 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#214 = ORIENTED_EDGE ( 'NONE', *, *, #165, .T. ) ;
+#215 = LINE ( 'NONE', #120, #59 ) ;
+#216 = FACE_OUTER_BOUND ( 'NONE', #666, .T. ) ;
+#217 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#218 = ORIENTED_EDGE ( 'NONE', *, *, #88, .F. ) ;
+#219 = AXIS2_PLACEMENT_3D ( 'NONE', #716, #338, #787 ) ;
+#220 = CARTESIAN_POINT ( 'NONE',  ( -1.375000000149336300, 0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#221 = VERTEX_POINT ( 'NONE', #802 ) ;
+#222 = EDGE_CURVE ( 'NONE', #347, #74, #460, .T. ) ;
+#223 = VECTOR ( 'NONE', #446, 39.37007874015748100 ) ;
+#224 = VERTEX_POINT ( 'NONE', #105 ) ;
+#225 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #316 );
+#226 = CARTESIAN_POINT ( 'NONE',  ( -0.3625000000746681500, 0.1230000000000000100, -0.4249999999999999900 ) ) ;
+#227 = ORIENTED_EDGE ( 'NONE', *, *, #734, .F. ) ;
+#228 = AXIS2_PLACEMENT_3D ( 'NONE', #448, #82, #507 ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.09000000000000002400, 0.1600000000000000000 ) ) ;
+#230 = VERTEX_POINT ( 'NONE', #472 ) ;
+#231 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, 0.1269999999999999700, -0.2409448818897636800 ) ) ;
+#233 = ORIENTED_EDGE ( 'NONE', *, *, #540, .F. ) ;
+#234 = VECTOR ( 'NONE', #484, 39.37007874015748100 ) ;
+#235 = AXIS2_PLACEMENT_3D ( 'NONE', #504, #137, #571 ) ;
+#236 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.897116662266849000E-016, -1.000000000000000000 ) ) ;
+#237 = PLANE ( 'NONE',  #314 ) ;
+#238 = PRODUCT ( 'Mag_Catch', 'Mag_Catch', '', ( #502 ) ) ;
+#239 = CARTESIAN_POINT ( 'NONE',  ( -0.7911541888634403600, 0.09889905083424757600, 0.1441009491657525000 ) ) ;
+#240 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#241 = VERTEX_POINT ( 'NONE', #166 ) ;
+#242 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -1.404115950705490000E-017, 0.0000000000000000000 ) ) ;
+#243 = CARTESIAN_POINT ( 'NONE',  ( -1.084780223066344600, -0.8871025170275345100, -0.1749999999999999900 ) ) ;
+#244 = ORIENTED_EDGE ( 'NONE', *, *, #640, .F. ) ;
+#245 = PLANE ( 'NONE',  #48 ) ;
+#246 = VECTOR ( 'NONE', #630, 39.37007874015748100 ) ;
+#247 = AXIS2_PLACEMENT_3D ( 'NONE', #623, #256, #191 ) ;
+#248 = AXIS2_PLACEMENT_3D ( 'NONE', #487, #678, #427 ) ;
+#249 = FACE_OUTER_BOUND ( 'NONE', #564, .T. ) ;
+#250 = CARTESIAN_POINT ( 'NONE',  ( -0.8625000000746682000, 0.0000000000000000000, -0.1749999999999999900 ) ) ;
+#251 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 1.404115950663606400E-017, 0.0000000000000000000 ) ) ;
+#252 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#253 = AXIS2_PLACEMENT_3D ( 'NONE', #195, #628, #261 ) ;
+#254 = EDGE_CURVE ( 'NONE', #178, #77, #128, .T. ) ;
+#255 = ORIENTED_EDGE ( 'NONE', *, *, #182, .F. ) ;
+#256 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#257 = SURFACE_SIDE_STYLE ('',( #411 ) ) ;
+#258 = FACE_OUTER_BOUND ( 'NONE', #725, .T. ) ;
+#259 = SURFACE_STYLE_USAGE ( .BOTH. , #627 ) ;
+#260 = CIRCLE ( 'NONE', #164, 0.09000000000000002400 ) ;
+#261 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #660, .F. ) ;
+#263 = PLANE ( 'NONE',  #209 ) ;
+#264 = ADVANCED_FACE ( 'NONE', ( #600 ), #762, .T. ) ;
+#265 = AXIS2_PLACEMENT_3D ( 'NONE', #758, #127, #562 ) ;
+#266 = VERTEX_POINT ( 'NONE', #55 ) ;
+#267 = CIRCLE ( 'NONE', #235, 0.1250000000000000000 ) ;
+#268 = LINE ( 'NONE', #126, #750 ) ;
+#269 = ADVANCED_FACE ( 'NONE', ( #587, #291 ), #541, .F. ) ;
+#270 = AXIS2_PLACEMENT_3D ( 'NONE', #767, #384, #20 ) ;
+#271 = COLOUR_RGB ( '',1.000000000000000000, 0.9490196078431372100, 0.9098039215686274400 ) ;
+#272 = ORIENTED_EDGE ( 'NONE', *, *, #585, .T. ) ;
+#273 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000000000200, 0.1230000000000000300, 0.08000000000000001600 ) ) ;
+#274 = AXIS2_PLACEMENT_3D ( 'NONE', #243, #549, #2 ) ;
+#275 = VERTEX_POINT ( 'NONE', #474 ) ;
+#276 = FACE_OUTER_BOUND ( 'NONE', #647, .T. ) ;
+#277 = CIRCLE ( 'NONE', #181, 0.1250000000000000000 ) ;
+#278 = CARTESIAN_POINT ( 'NONE',  ( -0.8340000000000001900, 0.08300000000000004600, 0.1600000000000000300 ) ) ;
+#279 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#280 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#281 = VERTEX_POINT ( 'NONE', #294 ) ;
+#282 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#283 = VECTOR ( 'NONE', #694, 39.37007874015748100 ) ;
+#284 = FACE_OUTER_BOUND ( 'NONE', #613, .T. ) ;
+#285 = VERTEX_POINT ( 'NONE', #737 ) ;
+#286 = ORIENTED_EDGE ( 'NONE', *, *, #710, .T. ) ;
+#287 = AXIS2_PLACEMENT_3D ( 'NONE', #675, #744, #240 ) ;
+#288 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#289 = ORIENTED_EDGE ( 'NONE', *, *, #764, .T. ) ;
+#290 = AXIS2_PLACEMENT_3D ( 'NONE', #477, #112, #608 ) ;
+#291 = FACE_OUTER_BOUND ( 'NONE', #809, .T. ) ;
+#292 = CARTESIAN_POINT ( 'NONE',  ( -0.6125000000746682000, 0.0000000000000000000, -0.2999999999999999900 ) ) ;
+#293 = CYLINDRICAL_SURFACE ( 'NONE', #379, 0.04700000000000000700 ) ;
+#294 = CARTESIAN_POINT ( 'NONE',  ( -0.7375000000746682000, -0.1230000000000000100, -0.2999999999999999900 ) ) ;
+#295 = VERTEX_POINT ( 'NONE', #668 ) ;
+#296 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3730000000000000000, -0.1749999999999999900 ) ) ;
+#297 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#298 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#299 = ORIENTED_EDGE ( 'NONE', *, *, #776, .T. ) ;
+#300 = VECTOR ( 'NONE', #251, 39.37007874015748100 ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #808, #420, #365 ) ;
+#302 = FACE_OUTER_BOUND ( 'NONE', #706, .T. ) ;
+#303 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#304 = CARTESIAN_POINT ( 'NONE',  ( -0.8625000000746682000, -0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#305 = ORIENTED_EDGE ( 'NONE', *, *, #665, .T. ) ;
+#306 = ORIENTED_EDGE ( 'NONE', *, *, #478, .T. ) ;
+#307 = CARTESIAN_POINT ( 'NONE',  ( -1.256889763928862800, 0.3730000000000001600, -0.05688976377952749400 ) ) ;
+#308 = CARTESIAN_POINT ( 'NONE',  ( -1.256889763928862800, 0.6863329649273394200, -0.05688976377952749400 ) ) ;
+#309 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#310 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #749 ) ;
+#311 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000000000200, -2.221014628995335500E-017, -0.1749999999999999900 ) ) ;
+#312 = FACE_OUTER_BOUND ( 'NONE', #791, .T. ) ;
+#313 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#314 = AXIS2_PLACEMENT_3D ( 'NONE', #671, #298, #740 ) ;
+#315 = FACE_BOUND ( 'NONE', #22, .T. ) ;
+#316 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#317 =( CONVERSION_BASED_UNIT ( 'INCH', #332 ) LENGTH_UNIT ( ) NAMED_UNIT ( #480 ) );
+#318 = VERTEX_POINT ( 'NONE', #664 ) ;
+#319 = DIRECTION ( 'NONE',  ( 0.5773502691896245100, -0.5773502691896261800, 0.5773502691896264000 ) ) ;
+#320 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.08999999999999999700, 0.0000000000000000000 ) ) ;
+#321 = ORIENTED_EDGE ( 'NONE', *, *, #637, .F. ) ;
+#322 = VECTOR ( 'NONE', #309, 39.37007874015748100 ) ;
+#323 = VECTOR ( 'NONE', #486, 39.37007874015748100 ) ;
+#324 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -1.498551724237046400E-015 ) ) ;
+#325 = ORIENTED_EDGE ( 'NONE', *, *, #780, .F. ) ;
+#326 = ORIENTED_EDGE ( 'NONE', *, *, #498, .T. ) ;
+#327 = ADVANCED_FACE ( 'NONE', ( #416 ), #92, .F. ) ;
+#328 = VERTEX_POINT ( 'NONE', #111 ) ;
+#329 = AXIS2_PLACEMENT_3D ( 'NONE', #415, #169, #603 ) ;
+#330 = VERTEX_POINT ( 'NONE', #545 ) ;
+#331 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#332 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #697 );
+#333 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#334 = ORIENTED_EDGE ( 'NONE', *, *, #165, .F. ) ;
+#335 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #357, #288 ) ;
+#336 = CIRCLE ( 'NONE', #413, 0.1250000000000000000 ) ;
+#337 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#338 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#339 = ORIENTED_EDGE ( 'NONE', *, *, #540, .T. ) ;
+#340 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#341 = ORIENTED_EDGE ( 'NONE', *, *, #788, .T. ) ;
+#342 = CARTESIAN_POINT ( 'NONE',  ( -0.7375000000746682000, -0.1230000000000000100, -0.2999999999999999900 ) ) ;
+#343 = ORIENTED_EDGE ( 'NONE', *, *, #715, .F. ) ;
+#344 = VECTOR ( 'NONE', #682, 39.37007874015748100 ) ;
+#345 = LINE ( 'NONE', #368, #468 ) ;
+#346 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 3.529886928867522000E-016 ) ) ;
+#347 = VERTEX_POINT ( 'NONE', #359 ) ;
+#348 = ORIENTED_EDGE ( 'NONE', *, *, #650, .T. ) ;
+#349 = ORIENTED_EDGE ( 'NONE', *, *, #665, .F. ) ;
+#350 = ORIENTED_EDGE ( 'NONE', *, *, #702, .F. ) ;
+#351 = ORIENTED_EDGE ( 'NONE', *, *, #550, .F. ) ;
+#352 = ORIENTED_EDGE ( 'NONE', *, *, #597, .F. ) ;
+#353 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#354 = CIRCLE ( 'NONE', #207, 0.1250000000000000000 ) ;
+#355 = AXIS2_PLACEMENT_3D ( 'NONE', #598, #731, #353 ) ;
+#356 = ORIENTED_EDGE ( 'NONE', *, *, #478, .F. ) ;
+#357 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#358 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#359 = CARTESIAN_POINT ( 'NONE',  ( -0.7869999998720000900, -0.1230000000000000300, 0.1130000000000000300 ) ) ;
+#360 = ORIENTED_EDGE ( 'NONE', *, *, #635, .T. ) ;
+#361 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #537, #162 ) ;
+#362 = CARTESIAN_POINT ( 'NONE',  ( -0.8096272165939041300, 0.08300000000000003200, 0.1600000000000000300 ) ) ;
+#363 = LINE ( 'NONE', #250, #322 ) ;
+#364 = CLOSED_SHELL ( 'NONE', ( #708, #578, #86, #778, #269, #508, #143, #203, #574, #513, #773, #391, #638, #31, #264, #456, #705, #395, #327, #28, #206, #452, #148, #634 ) ) ;
+#365 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#366 = LINE ( 'NONE', #296, #701 ) ;
+#367 = CARTESIAN_POINT ( 'NONE',  ( -1.375000000149336300, 0.3730000000000000000, -0.1749999999999999900 ) ) ;
+#368 = CARTESIAN_POINT ( 'NONE',  ( -1.094999999987386100, 0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#369 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#370 = ORIENTED_EDGE ( 'NONE', *, *, #607, .T. ) ;
+#371 = EDGE_LOOP ( 'NONE', ( #339, #397, #18, #719, #459, #130 ) ) ;
+#372 = CARTESIAN_POINT ( 'NONE',  ( -0.7869999998719998700, 0.2470000000000000500, 0.02185039370078733000 ) ) ;
+#373 = CIRCLE ( 'NONE', #188, 0.1250000000000000000 ) ;
+#374 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -1.404115950705490000E-017, 0.0000000000000000000 ) ) ;
+#375 = ORIENTED_EDGE ( 'NONE', *, *, #726, .T. ) ;
+#376 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#377 = PLANE ( 'NONE',  #469 ) ;
+#378 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#379 = AXIS2_PLACEMENT_3D ( 'NONE', #398, #462, #784 ) ;
+#380 =( CONVERSION_BASED_UNIT ( 'INCH', #728 ) LENGTH_UNIT ( ) NAMED_UNIT ( #297 ) );
+#381 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#382 = ORIENTED_EDGE ( 'NONE', *, *, #563, .F. ) ;
+#383 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#384 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#385 = VECTOR ( 'NONE', #6, 39.37007874015748100 ) ;
+#386 = PLANE ( 'NONE',  #412 ) ;
+#387 = VECTOR ( 'NONE', #735, 39.37007874015748100 ) ;
+#388 = ORIENTED_EDGE ( 'NONE', *, *, #163, .F. ) ;
+#389 = AXIS2_PLACEMENT_3D ( 'NONE', #717, #340, #789 ) ;
+#390 = ORIENTED_EDGE ( 'NONE', *, *, #66, .F. ) ;
+#391 = ADVANCED_FACE ( 'NONE', ( #620 ), #237, .T. ) ;
+#392 = ORIENTED_EDGE ( 'NONE', *, *, #585, .F. ) ;
+#393 = VECTOR ( 'NONE', #509, 39.37007874015748100 ) ;
+#394 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #713, #337 ) ;
+#395 = ADVANCED_FACE ( 'NONE', ( #736 ), #403, .F. ) ;
+#396 = ORIENTED_EDGE ( 'NONE', *, *, #528, .F. ) ;
+#397 = ORIENTED_EDGE ( 'NONE', *, *, #556, .T. ) ;
+#398 = CARTESIAN_POINT ( 'NONE',  ( -0.8340000000000001900, -0.1230000000000000300, 0.1130000000000000300 ) ) ;
+#399 = ORIENTED_EDGE ( 'NONE', *, *, #805, .T. ) ;
+#400 = DIRECTION ( 'NONE',  ( 3.529886928867522000E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#401 = VERTEX_POINT ( 'NONE', #62 ) ;
+#402 = PLANE ( 'NONE',  #361 ) ;
+#403 = CYLINDRICAL_SURFACE ( 'NONE', #301, 0.1250000000000000000 ) ;
+#404 = VECTOR ( 'NONE', #346, 39.37007874015748100 ) ;
+#405 = CARTESIAN_POINT ( 'NONE',  ( -0.6125000000746682000, 0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#406 = CARTESIAN_POINT ( 'NONE',  ( 2.008144335517134500E-017, 0.3730000000000000000, -0.05688976377952704300 ) ) ;
+#407 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#408 = ORIENTED_EDGE ( 'NONE', *, *, #680, .T. ) ;
+#409 = LINE ( 'NONE', #139, #223 ) ;
+#410 = AXIS2_PLACEMENT_3D ( 'NONE', #583, #210, #644 ) ;
+#411 = SURFACE_STYLE_FILL_AREA ( #624 ) ;
+#412 = AXIS2_PLACEMENT_3D ( 'NONE', #21, #89, #516 ) ;
+#413 = AXIS2_PLACEMENT_3D ( 'NONE', #711, #331, #781 ) ;
+#414 = ORIENTED_EDGE ( 'NONE', *, *, #734, .T. ) ;
+#415 = CARTESIAN_POINT ( 'NONE',  ( -1.095000000000000000, 0.1230000000000000300, 0.1600000000000000300 ) ) ;
+#416 = FACE_OUTER_BOUND ( 'NONE', #649, .T. ) ;
+#417 = LINE ( 'NONE', #342, #93 ) ;
+#418 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#419 = CARTESIAN_POINT ( 'NONE',  ( -0.8340000000000001900, 0.08300000000000003200, 0.1600000000000000300 ) ) ;
+#420 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#421 = ORIENTED_EDGE ( 'NONE', *, *, #177, .T. ) ;
+#422 = ORIENTED_EDGE ( 'NONE', *, *, #702, .T. ) ;
+#423 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #211 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #763, #381, #17 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#424 = CARTESIAN_POINT ( 'NONE',  ( -0.6000000000746610300, 0.3730000000000000000, 0.6000000000746672500 ) ) ;
+#425 = CIRCLE ( 'NONE', #270, 0.1250000000000000000 ) ;
+#426 = VERTEX_POINT ( 'NONE', #547 ) ;
+#427 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -2.776268286244169600E-016 ) ) ;
+#428 = VECTOR ( 'NONE', #615, 39.37007874015748100 ) ;
+#429 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, 0.1230000000000000300, -0.2409448818897636800 ) ) ;
+#430 = CIRCLE ( 'NONE', #490, 0.1181102362204724100 ) ;
+#431 = VERTEX_POINT ( 'NONE', #173 ) ;
+#432 = CARTESIAN_POINT ( 'NONE',  ( -0.6125000000746682000, 0.1230000000000000300, -0.4249999999999999900 ) ) ;
+#433 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#434 = DIRECTION ( 'NONE',  ( 1.498551724237046400E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#435 = CARTESIAN_POINT ( 'NONE',  ( -0.8340000000000001900, -0.1230000000000000300, 0.1600000000000000300 ) ) ;
+#436 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#437 = ORIENTED_EDGE ( 'NONE', *, *, #776, .F. ) ;
+#438 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, 0.1230000000000000300, -0.3590551181102361000 ) ) ;
+#439 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #461 ), #423 ) ;
+#440 = VECTOR ( 'NONE', #732, 39.37007874015748100 ) ;
+#441 = SHAPE_DEFINITION_REPRESENTATION ( #310, #656 ) ;
+#442 = ORIENTED_EDGE ( 'NONE', *, *, #88, .T. ) ;
+#443 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#444 = CIRCLE ( 'NONE', #175, 0.1230000000000000300 ) ;
+#445 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#446 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -1.404115950705490000E-017, 0.0000000000000000000 ) ) ;
+#447 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #461 ) ) ;
+#448 = CARTESIAN_POINT ( 'NONE',  ( -0.1125000000746681600, -0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#449 = EDGE_LOOP ( 'NONE', ( #286, #679, #408, #606 ) ) ;
+#450 = CARTESIAN_POINT ( 'NONE',  ( 2.008144335517134500E-017, 0.6863329649273394200, -0.05688976377952704300 ) ) ;
+#451 = FACE_OUTER_BOUND ( 'NONE', #47, .T. ) ;
+#452 = ADVANCED_FACE ( 'NONE', ( #258 ), #78, .F. ) ;
+#453 = VECTOR ( 'NONE', #374, 39.37007874015748100 ) ;
+#454 = EDGE_LOOP ( 'NONE', ( #351, #218, #349, #244 ) ) ;
+#455 = EDGE_LOOP ( 'NONE', ( #783, #683, #306, #643 ) ) ;
+#456 = ADVANCED_FACE ( 'NONE', ( #567 ), #544, .F. ) ;
+#457 = AXIS2_PLACEMENT_3D ( 'NONE', #492, #73, #497 ) ;
+#458 = CARTESIAN_POINT ( 'NONE',  ( -1.040000000149337500, -0.1230000000000000300, 0.1600000000000000300 ) ) ;
+#459 = ORIENTED_EDGE ( 'NONE', *, *, #805, .F. ) ;
+#460 = LINE ( 'NONE', #53, #785 ) ;
+#461 = STYLED_ITEM ( 'NONE', ( #579 ), #50 ) ;
+#462 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#463 = CARTESIAN_POINT ( 'NONE',  ( -0.8625000000746682000, -0.1230000000000000100, -0.1749999999999999900 ) ) ;
+#464 = ORIENTED_EDGE ( 'NONE', *, *, #254, .F. ) ;
+#465 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#466 = ORIENTED_EDGE ( 'NONE', *, *, #788, .F. ) ;
+#467 = VECTOR ( 'NONE', #434, 39.37007874015748100 ) ;
+#468 = VECTOR ( 'NONE', #242, 39.37007874015748100 ) ;
+#469 = AXIS2_PLACEMENT_3D ( 'NONE', #618, #252, #691 ) ;
+#470 = ORIENTED_EDGE ( 'NONE', *, *, #742, .T. ) ;
+#471 = FACE_OUTER_BOUND ( 'NONE', #91, .T. ) ;
+#472 = CARTESIAN_POINT ( 'NONE',  ( -0.9666699868458719100, 0.3730000000000000000, -0.1749999999999999900 ) ) ;
+#473 = FACE_OUTER_BOUND ( 'NONE', #98, .T. ) ;
+#474 = CARTESIAN_POINT ( 'NONE',  ( 1.102182119232618200E-017, -0.09000000000000006600, 0.0000000000000000000 ) ) ;
+#475 = ORIENTED_EDGE ( 'NONE', *, *, #528, .T. ) ;
+#476 = CARTESIAN_POINT ( 'NONE',  ( -0.8340000000000001900, 0.1230000000000000300, 0.1130000000000000300 ) ) ;
+#477 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1600000000000000300 ) ) ;
+#478 = EDGE_CURVE ( 'NONE', #733, #69, #107, .T. ) ;
+#479 = VERTEX_POINT ( 'NONE', #367 ) ;
+#480 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#481 = LINE ( 'NONE', #432, #1 ) ;
+#482 = LINE ( 'NONE', #119, #3 ) ;
+#483 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#484 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#485 = ORIENTED_EDGE ( 'NONE', *, *, #23, .F. ) ;
+#486 = DIRECTION ( 'NONE',  ( 0.7071067811865512400, 0.0000000000000000000, 0.7071067811865438000 ) ) ;
+#487 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000000000200, 0.0000000000000000000, 0.1600000000000000300 ) ) ;
+#488 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#489 = CARTESIAN_POINT ( 'NONE',  ( -0.1125000000746681800, -0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#490 = AXIS2_PLACEMENT_3D ( 'NONE', #124, #559, #187 ) ;
+#491 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, 0.1230000000000000300, -0.1228346456692912500 ) ) ;
+#492 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.4249999999999999900 ) ) ;
+#493 = ORIENTED_EDGE ( 'NONE', *, *, #182, .T. ) ;
+#494 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#495 = VECTOR ( 'NONE', #313, 39.37007874015748100 ) ;
+#496 = PLANE ( 'NONE',  #265 ) ;
+#497 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#498 = EDGE_CURVE ( 'NONE', #171, #281, #720, .T. ) ;
+#499 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #565 ) ;
+#500 = ORIENTED_EDGE ( 'NONE', *, *, #581, .F. ) ;
+#501 = CARTESIAN_POINT ( 'NONE',  ( -0.8340000000000001900, 0.08300000000000003200, 0.1600000000000000300 ) ) ;
+#502 = PRODUCT_CONTEXT ( 'NONE', #565, 'mechanical' ) ;
+#503 = ORIENTED_EDGE ( 'NONE', *, *, #660, .T. ) ;
+#504 = CARTESIAN_POINT ( 'NONE',  ( -0.3625000000746681500, 0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#505 = LINE ( 'NONE', #372, #25 ) ;
+#506 = CIRCLE ( 'NONE', #152, 0.04700000000000000700 ) ;
+#507 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#508 = ADVANCED_FACE ( 'NONE', ( #276 ), #526, .T. ) ;
+#509 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 1.404115950663606400E-017, 0.0000000000000000000 ) ) ;
+#510 = EDGE_CURVE ( 'NONE', #212, #221, #215, .T. ) ;
+#511 = FACE_BOUND ( 'NONE', #662, .T. ) ;
+#512 = ORIENTED_EDGE ( 'NONE', *, *, #601, .T. ) ;
+#513 = ADVANCED_FACE ( 'NONE', ( #700 ), #672, .T. ) ;
+#514 = ORIENTED_EDGE ( 'NONE', *, *, #741, .F. ) ;
+#515 = EDGE_CURVE ( 'NONE', #241, #531, #41, .T. ) ;
+#516 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#517 = PRESENTATION_STYLE_ASSIGNMENT (( #259 ) ) ;
+#518 = ORIENTED_EDGE ( 'NONE', *, *, #625, .F. ) ;
+#519 = CARTESIAN_POINT ( 'NONE',  ( -0.7869999998719998700, 0.1230000000000000300, 0.02185039370078733000 ) ) ;
+#520 = ORIENTED_EDGE ( 'NONE', *, *, #222, .F. ) ;
+#521 = EDGE_CURVE ( 'NONE', #103, #29, #199, .T. ) ;
+#522 = CARTESIAN_POINT ( 'NONE',  ( -0.2375000000746681500, 0.1230000000000000100, -0.2999999999999999900 ) ) ;
+#523 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#524 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#525 = ORIENTED_EDGE ( 'NONE', *, *, #595, .T. ) ;
+#526 = CYLINDRICAL_SURFACE ( 'NONE', #274, 0.1181102362204724800 ) ;
+#527 = ORIENTED_EDGE ( 'NONE', *, *, #163, .T. ) ;
+#528 = EDGE_CURVE ( 'NONE', #121, #689, #505, .T. ) ;
+#529 = CYLINDRICAL_SURFACE ( 'NONE', #146, 0.1250000000000000000 ) ;
+#530 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#531 = VERTEX_POINT ( 'NONE', #489 ) ;
+#532 = CARTESIAN_POINT ( 'NONE',  ( -0.7869999998719998700, -0.1230000000000000300, 0.02185039370078733000 ) ) ;
+#533 = VERTEX_POINT ( 'NONE', #123 ) ;
+#534 = LINE ( 'NONE', #84, #393 ) ;
+#535 = EDGE_CURVE ( 'NONE', #224, #178, #172, .T. ) ;
+#536 = ORIENTED_EDGE ( 'NONE', *, *, #792, .F. ) ;
+#537 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#538 = EDGE_LOOP ( 'NONE', ( #153, #39, #34, #629 ) ) ;
+#539 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#540 = EDGE_CURVE ( 'NONE', #198, #171, #363, .T. ) ;
+#541 = PLANE ( 'NONE',  #329 ) ;
+#542 = ORIENTED_EDGE ( 'NONE', *, *, #755, .F. ) ;
+#543 = DIRECTION ( 'NONE',  ( -5.812442539711197800E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#544 = CYLINDRICAL_SURFACE ( 'NONE', #287, 0.1250000000000000000 ) ;
+#545 = CARTESIAN_POINT ( 'NONE',  ( -1.256889763928862800, 0.1230000000000000300, -0.05688976377952749400 ) ) ;
+#546 = LINE ( 'NONE', #99, #387 ) ;
+#547 = CARTESIAN_POINT ( 'NONE',  ( -1.084780223066344600, 0.1230000000000000300, -0.05688976377952743200 ) ) ;
+#548 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#549 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#550 = EDGE_CURVE ( 'NONE', #676, #159, #481, .T. ) ;
+#551 = VERTEX_POINT ( 'NONE', #491 ) ;
+#552 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#553 = VECTOR ( 'NONE', #769, 39.37007874015748100 ) ;
+#554 = DIRECTION ( 'NONE',  ( -0.7071067811865438000, 0.0000000000000000000, 0.7071067811865512400 ) ) ;
+#555 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#556 = EDGE_CURVE ( 'NONE', #171, #30, #652, .T. ) ;
+#557 = CARTESIAN_POINT ( 'NONE',  ( -1.067500000074666800, 0.1230000000000000300, 0.1325000000746664500 ) ) ;
+#558 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000236584600, -0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#559 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#560 = ORIENTED_EDGE ( 'NONE', *, *, #792, .T. ) ;
+#561 = CARTESIAN_POINT ( 'NONE',  ( -1.084780223066344600, 0.3730000000000000000, -0.1749999999999999900 ) ) ;
+#562 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.7071067811865473500, 0.7071067811865476800 ) ) ;
+#563 = EDGE_CURVE ( 'NONE', #347, #689, #156, .T. ) ;
+#564 = EDGE_LOOP ( 'NONE', ( #360, #185, #605, #106 ) ) ;
+#565 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#566 = ORIENTED_EDGE ( 'NONE', *, *, #680, .F. ) ;
+#567 = FACE_OUTER_BOUND ( 'NONE', #160, .T. ) ;
+#568 = CARTESIAN_POINT ( 'NONE',  ( -1.080000000149337300, 0.1230000000000000000, 0.1200000000000000500 ) ) ;
+#569 = VECTOR ( 'NONE', #282, 39.37007874015748100 ) ;
+#570 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #135 ) ;
+#571 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#572 = EDGE_CURVE ( 'NONE', #74, #121, #632, .T. ) ;
+#573 = CARTESIAN_POINT ( 'NONE',  ( -0.7869999998719998700, 0.2470000000000000500, 0.02185039370078733000 ) ) ;
+#574 = ADVANCED_FACE ( 'NONE', ( #795 ), #496, .T. ) ;
+#575 = EDGE_LOOP ( 'NONE', ( #503, #493, #475, #414 ) ) ;
+#576 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ;
+#577 = VECTOR ( 'NONE', #319, 39.37007874015748900 ) ;
+#578 = ADVANCED_FACE ( 'NONE', ( #451 ), #592, .F. ) ;
+#579 = PRESENTATION_STYLE_ASSIGNMENT (( #695 ) ) ;
+#580 = ORIENTED_EDGE ( 'NONE', *, *, #498, .F. ) ;
+#581 = EDGE_CURVE ( 'NONE', #46, #533, #774, .T. ) ;
+#582 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#583 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -3.035386659626959100E-017, 0.0000000000000000000 ) ) ;
+#584 = VERTEX_POINT ( 'NONE', #16 ) ;
+#585 = EDGE_CURVE ( 'NONE', #178, #224, #141, .T. ) ;
+#586 = CARTESIAN_POINT ( 'NONE',  ( -0.6125000000746682000, 0.1230000000000000300, -0.4249999999999999900 ) ) ;
+#587 = FACE_BOUND ( 'NONE', #204, .T. ) ;
+#588 = VECTOR ( 'NONE', #217, 39.37007874015748100 ) ;
+#589 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#590 = CARTESIAN_POINT ( 'NONE',  ( -1.040000000149337500, 0.08300000000000003200, 0.1600000000000000300 ) ) ;
+#591 = ORIENTED_EDGE ( 'NONE', *, *, #640, .T. ) ;
+#592 = CYLINDRICAL_SURFACE ( 'NONE', #247, 0.1181102362204724100 ) ;
+#593 = EDGE_CURVE ( 'NONE', #65, #266, #425, .T. ) ;
+#594 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -3.035386659626959100E-017, 0.0000000000000000000 ) ) ;
+#595 = EDGE_CURVE ( 'NONE', #266, #212, #267, .T. ) ;
+#596 = FACE_OUTER_BOUND ( 'NONE', #575, .T. ) ;
+#597 = EDGE_CURVE ( 'NONE', #69, #669, #100, .T. ) ;
+#598 = CARTESIAN_POINT ( 'NONE',  ( -1.095000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#599 = ORIENTED_EDGE ( 'NONE', *, *, #572, .T. ) ;
+#600 = FACE_OUTER_BOUND ( 'NONE', #454, .T. ) ;
+#601 = EDGE_CURVE ( 'NONE', #531, #65, #117, .T. ) ;
+#602 = VECTOR ( 'NONE', #523, 39.37007874015748100 ) ;
+#603 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#604 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#605 = ORIENTED_EDGE ( 'NONE', *, *, #625, .T. ) ;
+#606 = ORIENTED_EDGE ( 'NONE', *, *, #800, .T. ) ;
+#607 = EDGE_CURVE ( 'NONE', #318, #531, #748, .T. ) ;
+#608 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -3.794233324533697900E-016 ) ) ;
+#609 = ORIENTED_EDGE ( 'NONE', *, *, #726, .F. ) ;
+#610 = CARTESIAN_POINT ( 'NONE',  ( -0.7875241998455111400, 0.1230000000000000300, 0.1200000000000000200 ) ) ;
+#611 = VECTOR ( 'NONE', #186, 39.37007874015748100 ) ;
+#612 = LINE ( 'NONE', #308, #158 ) ;
+#613 = EDGE_LOOP ( 'NONE', ( #621, #512, #770, #341 ) ) ;
+#614 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000236584600, -0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#615 = DIRECTION ( 'NONE',  ( -0.7071067811865512400, 0.0000000000000000000, -0.7071067811865438000 ) ) ;
+#616 = EDGE_CURVE ( 'NONE', #30, #103, #87, .T. ) ;
+#617 = CARTESIAN_POINT ( 'NONE',  ( -0.7869999998720002000, 0.1230000000000000300, 0.1600000000000005000 ) ) ;
+#618 = CARTESIAN_POINT ( 'NONE',  ( -1.095000000000000000, 0.0000000000000000000, 0.02185039370078743400 ) ) ;
+#619 = ORIENTED_EDGE ( 'NONE', *, *, #116, .T. ) ;
+#620 = FACE_OUTER_BOUND ( 'NONE', #449, .T. ) ;
+#621 = ORIENTED_EDGE ( 'NONE', *, *, #515, .T. ) ;
+#622 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#623 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, 0.1269999999999999700, -0.2409448818897636800 ) ) ;
+#624 = FILL_AREA_STYLE ('',( #129 ) ) ;
+#625 = EDGE_CURVE ( 'NONE', #159, #212, #409, .T. ) ;
+#626 = LINE ( 'NONE', #278, #132 ) ;
+#627 = SURFACE_SIDE_STYLE ('',( #687 ) ) ;
+#628 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#629 = ORIENTED_EDGE ( 'NONE', *, *, #639, .F. ) ;
+#630 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#631 = ORIENTED_EDGE ( 'NONE', *, *, #515, .F. ) ;
+#632 = LINE ( 'NONE', #617, #611 ) ;
+#633 = CIRCLE ( 'NONE', #101, 0.1181102362204724100 ) ;
+#634 = ADVANCED_FACE ( 'NONE', ( #727 ), #263, .F. ) ;
+#635 = EDGE_CURVE ( 'NONE', #221, #676, #534, .T. ) ;
+#636 = ORIENTED_EDGE ( 'NONE', *, *, #686, .T. ) ;
+#637 = EDGE_CURVE ( 'NONE', #533, #431, #68, .T. ) ;
+#638 = ADVANCED_FACE ( 'NONE', ( #707 ), #201, .F. ) ;
+#639 = EDGE_CURVE ( 'NONE', #221, #318, #354, .T. ) ;
+#640 = EDGE_CURVE ( 'NONE', #159, #584, #373, .T. ) ;
+#641 = CARTESIAN_POINT ( 'NONE',  ( -0.9666699868458719100, 0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#642 = VECTOR ( 'NONE', #524, 39.37007874015748100 ) ;
+#643 = ORIENTED_EDGE ( 'NONE', *, *, #597, .T. ) ;
+#644 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#645 = VECTOR ( 'NONE', #582, 39.37007874015748100 ) ;
+#646 = EDGE_CURVE ( 'NONE', #669, #103, #786, .T. ) ;
+#647 = EDGE_LOOP ( 'NONE', ( #202, #113, #709, #399 ) ) ;
+#648 = CARTESIAN_POINT ( 'NONE',  ( -0.3625000000746681500, -0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#649 = EDGE_LOOP ( 'NONE', ( #85, #388, #801, #793 ) ) ;
+#650 = EDGE_CURVE ( 'NONE', #584, #198, #277, .T. ) ;
+#651 = CARTESIAN_POINT ( 'NONE',  ( -0.8625000000746682000, 0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#652 = LINE ( 'NONE', #558, #300 ) ;
+#653 = VECTOR ( 'NONE', #483, 39.37007874015748100 ) ;
+#654 = CARTESIAN_POINT ( 'NONE',  ( -0.6125000000746682000, -0.1230000000000000100, -0.4249999999999999900 ) ) ;
+#655 = ORIENTED_EDGE ( 'NONE', *, *, #742, .F. ) ;
+#656 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Mag_Catch', ( #50, #757 ), #806 ) ;
+#657 = ORIENTED_EDGE ( 'NONE', *, *, #116, .F. ) ;
+#658 = EDGE_CURVE ( 'NONE', #669, #63, #765, .T. ) ;
+#659 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #135, 'design' ) ;
+#660 = EDGE_CURVE ( 'NONE', #295, #328, #444, .T. ) ;
+#661 = PLANE ( 'NONE',  #355 ) ;
+#662 = EDGE_LOOP ( 'NONE', ( #272, #71 ) ) ;
+#663 = LINE ( 'NONE', #192, #495 ) ;
+#664 = CARTESIAN_POINT ( 'NONE',  ( -0.2375000000746681500, -0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#665 = EDGE_CURVE ( 'NONE', #584, #281, #417, .T. ) ;
+#666 = EDGE_LOOP ( 'NONE', ( #83, #54, #5, #464 ) ) ;
+#667 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#668 = CARTESIAN_POINT ( 'NONE',  ( 0.1210000000473168600, -0.1230000000000000300, 0.02185039370078740000 ) ) ;
+#669 = VERTEX_POINT ( 'NONE', #590 ) ;
+#670 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#671 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3730000000000000000, 0.0000000000000000000 ) ) ;
+#672 = CYLINDRICAL_SURFACE ( 'NONE', #248, 0.1230000000000000300 ) ;
+#673 = VECTOR ( 'NONE', #61, 39.37007874015748100 ) ;
+#674 = CARTESIAN_POINT ( 'NONE',  ( -0.7875241998455111400, 0.1230000000000000300, 0.1200000000000000200 ) ) ;
+#675 = CARTESIAN_POINT ( 'NONE',  ( -0.8625000000746682000, 0.0000000000000000000, -0.2999999999999999900 ) ) ;
+#676 = VERTEX_POINT ( 'NONE', #654 ) ;
+#677 = CARTESIAN_POINT ( 'NONE',  ( -1.084780223066344600, 0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#678 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.388134143122084800E-016, -1.000000000000000000 ) ) ;
+#679 = ORIENTED_EDGE ( 'NONE', *, *, #741, .T. ) ;
+#680 = EDGE_CURVE ( 'NONE', #771, #401, #108, .T. ) ;
+#681 = CARTESIAN_POINT ( 'NONE',  ( -1.095000000000000000, 0.0000000000000000000, -0.1749999999999999900 ) ) ;
+#682 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#683 = ORIENTED_EDGE ( 'NONE', *, *, #715, .T. ) ;
+#684 = EDGE_LOOP ( 'NONE', ( #760, #183, #179, #421 ) ) ;
+#685 = PLANE ( 'NONE',  #134 ) ;
+#686 = EDGE_CURVE ( 'NONE', #479, #30, #738, .T. ) ;
+#687 = SURFACE_STYLE_FILL_AREA ( #194 ) ;
+#688 = EDGE_CURVE ( 'NONE', #275, #77, #260, .T. ) ;
+#689 = VERTEX_POINT ( 'NONE', #532 ) ;
+#690 = CARTESIAN_POINT ( 'NONE',  ( -0.7869999998719998700, -0.1230000000000000300, 0.02185039370078733000 ) ) ;
+#691 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#692 = FILL_AREA_STYLE_COLOUR ( '', #49 ) ;
+#693 = ORIENTED_EDGE ( 'NONE', *, *, #521, .F. ) ;
+#694 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#695 = SURFACE_STYLE_USAGE ( .BOTH. , #257 ) ;
+#696 = EDGE_CURVE ( 'NONE', #551, #431, #546, .T. ) ;
+#697 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#698 = ORIENTED_EDGE ( 'NONE', *, *, #646, .F. ) ;
+#699 = CARTESIAN_POINT ( 'NONE',  ( -1.082333333432891500, 0.1253333332835542300, 0.1176666667164458100 ) ) ;
+#700 = FACE_OUTER_BOUND ( 'NONE', #44, .T. ) ;
+#701 = VECTOR ( 'NONE', #670, 39.37007874015748100 ) ;
+#702 = EDGE_CURVE ( 'NONE', #733, #74, #722, .T. ) ;
+#703 = EDGE_LOOP ( 'NONE', ( #520, #90, #396, #102 ) ) ;
+#704 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #380, 'distance_accuracy_value', 'NONE');
+#705 = ADVANCED_FACE ( 'NONE', ( #80 ), #529, .T. ) ;
+#706 = EDGE_LOOP ( 'NONE', ( #636, #193, #698, #352, #560, #437, #514 ) ) ;
+#707 = FACE_OUTER_BOUND ( 'NONE', #136, .T. ) ;
+#708 = ADVANCED_FACE ( 'NONE', ( #216 ), #200, .F. ) ;
+#709 = ORIENTED_EDGE ( 'NONE', *, *, #729, .F. ) ;
+#710 = EDGE_CURVE ( 'NONE', #230, #479, #366, .T. ) ;
+#711 = CARTESIAN_POINT ( 'NONE',  ( -0.6125000000746682000, -0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#712 = ORIENTED_EDGE ( 'NONE', *, *, #23, .T. ) ;
+#713 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#714 = EDGE_CURVE ( 'NONE', #224, #275, #60, .T. ) ;
+#715 = EDGE_CURVE ( 'NONE', #63, #733, #95, .T. ) ;
+#716 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, -0.1230000000000000300, -0.2409448818897636800 ) ) ;
+#717 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000746681500, 0.1230000000000000300, -0.2409448818897636800 ) ) ;
+#718 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ;
+#719 = ORIENTED_EDGE ( 'NONE', *, *, #710, .F. ) ;
+#720 = CIRCLE ( 'NONE', #110, 0.1250000000000000000 ) ;
+#721 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#722 = CIRCLE ( 'NONE', #161, 0.04700000000000000700 ) ;
+#723 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#724 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -3.794233324533697900E-016 ) ) ;
+#725 = EDGE_LOOP ( 'NONE', ( #19, #392, #798, #619 ) ) ;
+#726 = EDGE_CURVE ( 'NONE', #347, #29, #506, .T. ) ;
+#727 = FACE_OUTER_BOUND ( 'NONE', #703, .T. ) ;
+#728 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #761 );
+#729 = EDGE_CURVE ( 'NONE', #144, #426, #42, .T. ) ;
+#730 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #238 ) ) ;
+#731 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#732 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.897116662266849000E-016, -1.000000000000000000 ) ) ;
+#733 = VERTEX_POINT ( 'NONE', #610 ) ;
+#734 = EDGE_CURVE ( 'NONE', #689, #295, #174, .T. ) ;
+#735 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#736 = FACE_OUTER_BOUND ( 'NONE', #684, .T. ) ;
+#737 = CARTESIAN_POINT ( 'NONE',  ( 0.1209999999999999800, 0.1230000000000000100, -0.1749999999999999900 ) ) ;
+#738 = LINE ( 'NONE', #220, #569 ) ;
+#739 = CARTESIAN_POINT ( 'NONE',  ( 1.102182119232618200E-017, -0.09000000000000002400, 0.1600000000000000600 ) ) ;
+#740 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#741 = EDGE_CURVE ( 'NONE', #479, #771, #26, .T. ) ;
+#742 = EDGE_CURVE ( 'NONE', #330, #426, #482, .T. ) ;
+#743 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #238, .NOT_KNOWN. ) ;
+#744 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#745 = ORIENTED_EDGE ( 'NONE', *, *, #635, .F. ) ;
+#746 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#747 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#748 = CIRCLE ( 'NONE', #228, 0.1250000000000000000 ) ;
+#749 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #743, #659 ) ;
+#750 = VECTOR ( 'NONE', #436, 39.37007874015748100 ) ;
+#751 = CARTESIAN_POINT ( 'NONE',  ( -0.4870000000000000400, -0.1230000000000000300, 0.1600000000000000300 ) ) ;
+#752 = VECTOR ( 'NONE', #768, 39.37007874015748100 ) ;
+#753 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#754 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -2.620859199958414600E-017, 0.02185039370078743400 ) ) ;
+#755 = EDGE_CURVE ( 'NONE', #65, #285, #345, .T. ) ;
+#756 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#757 = AXIS2_PLACEMENT_3D ( 'NONE', #494, #445, #79 ) ;
+#758 = CARTESIAN_POINT ( 'NONE',  ( -1.087000000000000000, 0.1230000000000000300, 0.1200000000000000200 ) ) ;
+#759 = CARTESIAN_POINT ( 'NONE',  ( -1.375000000149336300, -0.1230000000000000300, -0.1749999999999999900 ) ) ;
+#760 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ;
+#761 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#762 = CYLINDRICAL_SURFACE ( 'NONE', #335, 0.1250000000000000000 ) ;
+#763 =( CONVERSION_BASED_UNIT ( 'INCH', #225 ) LENGTH_UNIT ( ) NAMED_UNIT ( #604 ) );
+#764 = EDGE_CURVE ( 'NONE', #551, #46, #633, .T. ) ;
+#765 = LINE ( 'NONE', #154, #588 ) ;
+#766 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#767 = CARTESIAN_POINT ( 'NONE',  ( -0.1125000000746681600, 0.1230000000000000300, -0.2999999999999999900 ) ) ;
+#768 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#769 = DIRECTION ( 'NONE',  ( 0.7071067811865512400, 0.0000000000000000000, 0.7071067811865438000 ) ) ;
+#770 = ORIENTED_EDGE ( 'NONE', *, *, #755, .T. ) ;
+#771 = VERTEX_POINT ( 'NONE', #307 ) ;
+#772 = DIRECTION ( 'NONE',  ( -1.498551724237046400E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#773 = ADVANCED_FACE ( 'NONE', ( #302 ), #245, .T. ) ;
+#774 = LINE ( 'NONE', #72, #283 ) ;
+#775 = LINE ( 'NONE', #557, #428 ) ;
+#776 = EDGE_CURVE ( 'NONE', #771, #330, #612, .T. ) ;
+#777 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #43 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #317, #766, #383 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#778 = ADVANCED_FACE ( 'NONE', ( #284 ), #685, .T. ) ;
+#779 = ORIENTED_EDGE ( 'NONE', *, *, #639, .T. ) ;
+#780 = EDGE_CURVE ( 'NONE', #144, #198, #142, .T. ) ;
+#781 = DIRECTION ( 'NONE',  ( 1.092739197465705300E-015, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#782 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #799 ), #777 ) ;
+#783 = ORIENTED_EDGE ( 'NONE', *, *, #658, .T. ) ;
+#784 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#785 = VECTOR ( 'NONE', #539, 39.37007874015748100 ) ;
+#786 = LINE ( 'NONE', #790, #602 ) ;
+#787 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#788 = EDGE_CURVE ( 'NONE', #285, #241, #796, .T. ) ;
+#789 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#790 = CARTESIAN_POINT ( 'NONE',  ( -1.040000000149337500, -0.1230000000000000300, 0.1600000000000000300 ) ) ;
+#791 = EDGE_LOOP ( 'NONE', ( #36, #214, #51, #807 ) ) ;
+#792 = EDGE_CURVE ( 'NONE', #69, #330, #775, .T. ) ;
+#793 = ORIENTED_EDGE ( 'NONE', *, *, #637, .T. ) ;
+#794 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #799 ) ) ;
+#795 = FACE_OUTER_BOUND ( 'NONE', #455, .T. ) ;
+#796 = CIRCLE ( 'NONE', #45, 0.1230000000000000300 ) ;
+#797 = ORIENTED_EDGE ( 'NONE', *, *, #222, .T. ) ;
+#798 = ORIENTED_EDGE ( 'NONE', *, *, #254, .T. ) ;
+#799 = STYLED_ITEM ( 'NONE', ( #517 ), #656 ) ;
+#800 = EDGE_CURVE ( 'NONE', #401, #230, #118, .T. ) ;
+#801 = ORIENTED_EDGE ( 'NONE', *, *, #581, .T. ) ;
+#802 = CARTESIAN_POINT ( 'NONE',  ( -0.3625000000746681500, -0.1230000000000000300, -0.4249999999999999900 ) ) ;
+#803 = VECTOR ( 'NONE', #333, 39.37007874015748100 ) ;
+#804 = CIRCLE ( 'NONE', #389, 0.1181102362204724100 ) ;
+#805 = EDGE_CURVE ( 'NONE', #144, #230, #268, .T. ) ;
+#806 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #704 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #380, #15, #443 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#807 = ORIENTED_EDGE ( 'NONE', *, *, #646, .T. ) ;
+#808 = CARTESIAN_POINT ( 'NONE',  ( -0.1125000000746681600, 0.0000000000000000000, -0.2999999999999999900 ) ) ;
+#809 = EDGE_LOOP ( 'NONE', ( #599, #255, #718, #542, #56, #525, #518, #591, #348, #325, #155, #655, #536, #356, #422 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Mag_Catch_Pin.step

@@ -0,0 +1,166 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Mag_Catch_Pin.step',
+    '2014-05-14T06:09:50',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#2 = EDGE_LOOP ( 'NONE', ( #54, #61, #79, #72 ) ) ;
+#3 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#4 = PRODUCT ( 'Mag_Catch_Pin', 'Mag_Catch_Pin', '', ( #77 ) ) ;
+#5 = FACE_OUTER_BOUND ( 'NONE', #2, .T. ) ;
+#6 = FACE_OUTER_BOUND ( 'NONE', #105, .T. ) ;
+#7 =( CONVERSION_BASED_UNIT ( 'INCH', #117 ) LENGTH_UNIT ( ) NAMED_UNIT ( #99 ) );
+#8 = VECTOR ( 'NONE', #107, 39.37007874015748100 ) ;
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #134, .F. ) ;
+#10 = CIRCLE ( 'NONE', #148, 0.1181102362204724700 ) ;
+#11 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#12 = AXIS2_PLACEMENT_3D ( 'NONE', #82, #11, #88 ) ;
+#13 = CYLINDRICAL_SURFACE ( 'NONE', #71, 0.1181102362204724700 ) ;
+#14 = FILL_AREA_STYLE ('',( #119 ) ) ;
+#15 = CIRCLE ( 'NONE', #135, 0.1181102362204724700 ) ;
+#16 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#17 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724700, 1.446433227339393800E-017, 0.0000000000000000000 ) ) ;
+#18 = FILL_AREA_STYLE ('',( #67 ) ) ;
+#19 = SURFACE_SIDE_STYLE ('',( #36 ) ) ;
+#20 = EDGE_LOOP ( 'NONE', ( #125, #144 ) ) ;
+#21 = ADVANCED_FACE ( 'NONE', ( #6 ), #13, .T. ) ;
+#22 = SURFACE_STYLE_FILL_AREA ( #14 ) ;
+#23 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #123, #103 ) ;
+#24 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#26 = SURFACE_STYLE_USAGE ( .BOTH. , #91 ) ;
+#27 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#28 = VERTEX_POINT ( 'NONE', #48 ) ;
+#29 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #37 ) ;
+#30 = PLANE ( 'NONE',  #23 ) ;
+#31 = PRESENTATION_STYLE_ASSIGNMENT (( #26 ) ) ;
+#32 = PLANE ( 'NONE',  #133 ) ;
+#33 = ADVANCED_FACE ( 'NONE', ( #44 ), #30, .T. ) ;
+#34 = LINE ( 'NONE', #96, #8 ) ;
+#35 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#36 = SURFACE_STYLE_FILL_AREA ( #18 ) ;
+#37 = CLOSED_SHELL ( 'NONE', ( #129, #21, #33, #40 ) ) ;
+#38 = CIRCLE ( 'NONE', #146, 0.1181102362204724700 ) ;
+#39 = PRESENTATION_STYLE_ASSIGNMENT (( #139 ) ) ;
+#40 = ADVANCED_FACE ( 'NONE', ( #49 ), #32, .F. ) ;
+#41 = VECTOR ( 'NONE', #1, 39.37007874015748100 ) ;
+#42 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#43 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#44 = FACE_OUTER_BOUND ( 'NONE', #20, .T. ) ;
+#45 =( CONVERSION_BASED_UNIT ( 'INCH', #112 ) LENGTH_UNIT ( ) NAMED_UNIT ( #47 ) );
+#46 = LINE ( 'NONE', #73, #41 ) ;
+#47 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#48 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724700, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#49 = FACE_OUTER_BOUND ( 'NONE', #69, .T. ) ;
+#50 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #7, 'distance_accuracy_value', 'NONE');
+#51 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #50 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #7, #87, #80 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#52 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #109 );
+#53 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #126, .F. ) ;
+#55 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724700, 1.446433227339393800E-017, 0.5708661417322835600 ) ) ;
+#56 =( CONVERSION_BASED_UNIT ( 'INCH', #52 ) LENGTH_UNIT ( ) NAMED_UNIT ( #16 ) );
+#57 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #81 ), #51 ) ;
+#58 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#59 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#60 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #81 ) ) ;
+#61 = ORIENTED_EDGE ( 'NONE', *, *, #134, .T. ) ;
+#62 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#63 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#64 = ORIENTED_EDGE ( 'NONE', *, *, #143, .T. ) ;
+#65 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#67 = FILL_AREA_STYLE_COLOUR ( '', #27 ) ;
+#68 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#69 = EDGE_LOOP ( 'NONE', ( #75, #115 ) ) ;
+#70 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #3, 'design' ) ;
+#71 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #137, #78 ) ;
+#72 = ORIENTED_EDGE ( 'NONE', *, *, #124, .F. ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724700, 1.446433227339393800E-017, 0.5708661417322835600 ) ) ;
+#74 = ORIENTED_EDGE ( 'NONE', *, *, #94, .F. ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #143, .F. ) ;
+#76 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #83 ) ;
+#77 = PRODUCT_CONTEXT ( 'NONE', #83, 'mechanical' ) ;
+#78 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#79 = ORIENTED_EDGE ( 'NONE', *, *, #114, .T. ) ;
+#80 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#81 = STYLED_ITEM ( 'NONE', ( #39 ), #29 ) ;
+#82 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#83 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#84 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #3 ) ;
+#85 = VERTEX_POINT ( 'NONE', #55 ) ;
+#86 = VERTEX_POINT ( 'NONE', #35 ) ;
+#87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#88 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#91 = SURFACE_SIDE_STYLE ('',( #22 ) ) ;
+#92 = CIRCLE ( 'NONE', #12, 0.1181102362204724700 ) ;
+#93 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #45, 'distance_accuracy_value', 'NONE');
+#94 = EDGE_CURVE ( 'NONE', #28, #85, #92, .T. ) ;
+#95 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #142 ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724700, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#97 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#98 = ORIENTED_EDGE ( 'NONE', *, *, #124, .T. ) ;
+#99 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#100 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#101 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#102 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#103 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#104 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#105 = EDGE_LOOP ( 'NONE', ( #9, #74, #98, #64 ) ) ;
+#106 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#107 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#108 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#109 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#110 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#111 = VERTEX_POINT ( 'NONE', #17 ) ;
+#112 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #101 );
+#113 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#114 = EDGE_CURVE ( 'NONE', #111, #86, #15, .T. ) ;
+#115 = ORIENTED_EDGE ( 'NONE', *, *, #114, .F. ) ;
+#116 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #56, 'distance_accuracy_value', 'NONE');
+#117 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #106 );
+#118 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#119 = FILL_AREA_STYLE_COLOUR ( '', #59 ) ;
+#120 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#121 = SHAPE_DEFINITION_REPRESENTATION ( #95, #122 ) ;
+#122 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Mag_Catch_Pin', ( #29, #130 ), #147 ) ;
+#123 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#124 = EDGE_CURVE ( 'NONE', #28, #86, #34, .T. ) ;
+#125 = ORIENTED_EDGE ( 'NONE', *, *, #94, .T. ) ;
+#126 = EDGE_CURVE ( 'NONE', #85, #28, #10, .T. ) ;
+#127 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #4 ) ) ;
+#128 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #4, .NOT_KNOWN. ) ;
+#129 = ADVANCED_FACE ( 'NONE', ( #5 ), #140, .T. ) ;
+#130 = AXIS2_PLACEMENT_3D ( 'NONE', #90, #65, #131 ) ;
+#131 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#132 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #93 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #45, #110, #58 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#133 = AXIS2_PLACEMENT_3D ( 'NONE', #113, #68, #104 ) ;
+#134 = EDGE_CURVE ( 'NONE', #85, #111, #46, .T. ) ;
+#135 = AXIS2_PLACEMENT_3D ( 'NONE', #53, #118, #62 ) ;
+#136 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #141 ), #132 ) ;
+#137 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#138 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #141 ) ) ;
+#139 = SURFACE_STYLE_USAGE ( .BOTH. , #19 ) ;
+#140 = CYLINDRICAL_SURFACE ( 'NONE', #145, 0.1181102362204724700 ) ;
+#141 = STYLED_ITEM ( 'NONE', ( #31 ), #122 ) ;
+#142 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #128, #70 ) ;
+#143 = EDGE_CURVE ( 'NONE', #86, #111, #38, .T. ) ;
+#144 = ORIENTED_EDGE ( 'NONE', *, *, #126, .T. ) ;
+#145 = AXIS2_PLACEMENT_3D ( 'NONE', #89, #149, #108 ) ;
+#146 = AXIS2_PLACEMENT_3D ( 'NONE', #25, #100, #43 ) ;
+#147 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #116 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #56, #120, #63 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#148 = AXIS2_PLACEMENT_3D ( 'NONE', #24, #97, #42 ) ;
+#149 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Mag_Release_Bar.step

@@ -0,0 +1,347 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Mag_Release_Bar.step',
+    '2014-05-14T06:09:09',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#2 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#3 = ORIENTED_EDGE ( 'NONE', *, *, #136, .T. ) ;
+#4 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#5 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.3149606299212598400 ) ) ;
+#6 = FILL_AREA_STYLE ('',( #105 ) ) ;
+#7 = CYLINDRICAL_SURFACE ( 'NONE', #311, 0.09842519685039370600 ) ;
+#8 = EDGE_CURVE ( 'NONE', #277, #289, #179, .T. ) ;
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #62, .F. ) ;
+#10 = ORIENTED_EDGE ( 'NONE', *, *, #109, .T. ) ;
+#11 = CIRCLE ( 'NONE', #321, 0.09842519685039370600 ) ;
+#12 = ORIENTED_EDGE ( 'NONE', *, *, #243, .F. ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.3149606299212598400 ) ) ;
+#14 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #206 ) ) ;
+#15 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#16 = PRESENTATION_STYLE_ASSIGNMENT (( #34 ) ) ;
+#17 = CARTESIAN_POINT ( 'NONE',  ( 4.566679722921851000, 0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#18 = ORIENTED_EDGE ( 'NONE', *, *, #59, .T. ) ;
+#19 = EDGE_CURVE ( 'NONE', #71, #58, #93, .T. ) ;
+#20 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#21 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#22 = LINE ( 'NONE', #198, #229 ) ;
+#23 = CARTESIAN_POINT ( 'NONE',  ( -0.09842519685039370600, 0.0000000000000000000, 0.3149606299212598400 ) ) ;
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #59, .F. ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#26 = VERTEX_POINT ( 'NONE', #216 ) ;
+#27 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#28 = EDGE_CURVE ( 'NONE', #289, #240, #327, .T. ) ;
+#29 = CIRCLE ( 'NONE', #31, 0.09842519685039370600 ) ;
+#30 = CARTESIAN_POINT ( 'NONE',  ( -0.05708661417322834200, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#31 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #191, #40 ) ;
+#32 = CARTESIAN_POINT ( 'NONE',  ( -0.09842519685039370600, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#33 = CYLINDRICAL_SURFACE ( 'NONE', #329, 0.05708661417322834200 ) ;
+#34 = SURFACE_STYLE_USAGE ( .BOTH. , #185 ) ;
+#35 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ;
+#36 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#37 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #230 );
+#38 = LINE ( 'NONE', #42, #292 ) ;
+#39 = VERTEX_POINT ( 'NONE', #101 ) ;
+#40 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#41 = ADVANCED_FACE ( 'NONE', ( #250 ), #110, .T. ) ;
+#42 = CARTESIAN_POINT ( 'NONE',  ( 4.724160037882481500, 0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#43 = EDGE_CURVE ( 'NONE', #213, #252, #29, .T. ) ;
+#44 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#45 = CARTESIAN_POINT ( 'NONE',  ( 4.566679722921851000, 0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#46 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #304, 'design' ) ;
+#47 = ORIENTED_EDGE ( 'NONE', *, *, #136, .F. ) ;
+#48 = ORIENTED_EDGE ( 'NONE', *, *, #8, .T. ) ;
+#49 = EDGE_CURVE ( 'NONE', #252, #319, #189, .T. ) ;
+#50 = FACE_BOUND ( 'NONE', #137, .T. ) ;
+#51 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#52 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#53 = ORIENTED_EDGE ( 'NONE', *, *, #8, .F. ) ;
+#54 =( CONVERSION_BASED_UNIT ( 'INCH', #260 ) LENGTH_UNIT ( ) NAMED_UNIT ( #195 ) );
+#55 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude4', #147 ) ;
+#56 = VERTEX_POINT ( 'NONE', #188 ) ;
+#57 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#58 = VERTEX_POINT ( 'NONE', #63 ) ;
+#59 = EDGE_CURVE ( 'NONE', #277, #103, #302, .T. ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #49, .T. ) ;
+#61 = FACE_OUTER_BOUND ( 'NONE', #244, .T. ) ;
+#62 = EDGE_CURVE ( 'NONE', #199, #56, #38, .T. ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( 4.566679722921851000, -0.09842519685039370600, 0.3149606299212599500 ) ) ;
+#64 = ADVANCED_FACE ( 'NONE', ( #175 ), #33, .T. ) ;
+#65 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ;
+#66 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#67 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#68 = EDGE_LOOP ( 'NONE', ( #297, #119, #217, #47, #112 ) ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.3149606299212598400 ) ) ;
+#70 = CIRCLE ( 'NONE', #312, 0.1574803149606300000 ) ;
+#71 = VERTEX_POINT ( 'NONE', #17 ) ;
+#72 = EDGE_CURVE ( 'NONE', #56, #319, #165, .T. ) ;
+#73 = PRODUCT ( 'Mag_Release_Bar', 'Mag_Release_Bar', '', ( #132 ) ) ;
+#74 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #116, .T. ) ;
+#76 = EDGE_CURVE ( 'NONE', #26, #39, #95, .T. ) ;
+#77 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#78 =( CONVERSION_BASED_UNIT ( 'INCH', #37 ) LENGTH_UNIT ( ) NAMED_UNIT ( #242 ) );
+#79 = VECTOR ( 'NONE', #220, 39.37007874015748100 ) ;
+#80 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#81 = EDGE_LOOP ( 'NONE', ( #221, #9, #255, #155 ) ) ;
+#82 = SURFACE_STYLE_FILL_AREA ( #6 ) ;
+#83 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ;
+#84 = AXIS2_PLACEMENT_3D ( 'NONE', #5, #234, #104 ) ;
+#85 = CIRCLE ( 'NONE', #308, 0.05708661417322834200 ) ;
+#86 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #78, 'distance_accuracy_value', 'NONE');
+#87 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ;
+#88 = ADVANCED_FACE ( 'NONE', ( #160 ), #196, .F. ) ;
+#89 = FILL_AREA_STYLE ('',( #241 ) ) ;
+#90 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#91 = EDGE_LOOP ( 'NONE', ( #224, #97, #3, #126 ) ) ;
+#92 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#93 = LINE ( 'NONE', #134, #227 ) ;
+#94 = EDGE_CURVE ( 'NONE', #58, #252, #22, .T. ) ;
+#95 = LINE ( 'NONE', #67, #106 ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ;
+#98 = ORIENTED_EDGE ( 'NONE', *, *, #232, .F. ) ;
+#99 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #54, 'distance_accuracy_value', 'NONE');
+#100 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#101 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#102 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.3149606299212598400 ) ) ;
+#103 = VERTEX_POINT ( 'NONE', #222 ) ;
+#104 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#105 = FILL_AREA_STYLE_COLOUR ( '', #111 ) ;
+#106 = VECTOR ( 'NONE', #172, 39.37007874015748100 ) ;
+#107 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#108 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#109 = EDGE_CURVE ( 'NONE', #103, #240, #85, .T. ) ;
+#110 = PLANE ( 'NONE',  #84 ) ;
+#111 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #197, .F. ) ;
+#113 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #142, 'distance_accuracy_value', 'NONE');
+#114 = EDGE_LOOP ( 'NONE', ( #211, #121 ) ) ;
+#115 = FACE_OUTER_BOUND ( 'NONE', #148, .T. ) ;
+#116 = EDGE_CURVE ( 'NONE', #240, #103, #275, .T. ) ;
+#117 = SURFACE_STYLE_USAGE ( .BOTH. , #256 ) ;
+#118 = EDGE_CURVE ( 'NONE', #213, #330, #215, .T. ) ;
+#119 = ORIENTED_EDGE ( 'NONE', *, *, #62, .T. ) ;
+#120 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #109, .F. ) ;
+#122 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#123 = CARTESIAN_POINT ( 'NONE',  ( 4.566679722921851000, -0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#124 = LINE ( 'NONE', #27, #203 ) ;
+#125 = EDGE_CURVE ( 'NONE', #199, #71, #223, .T. ) ;
+#126 = ORIENTED_EDGE ( 'NONE', *, *, #49, .F. ) ;
+#127 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#128 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#129 = ORIENTED_EDGE ( 'NONE', *, *, #204, .F. ) ;
+#130 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#131 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #161 ) ;
+#132 = PRODUCT_CONTEXT ( 'NONE', #161, 'mechanical' ) ;
+#133 = FACE_OUTER_BOUND ( 'NONE', #91, .T. ) ;
+#134 = CARTESIAN_POINT ( 'NONE',  ( 4.566679722921851000, 0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#135 = EDGE_LOOP ( 'NONE', ( #98, #35, #167, #193, #233 ) ) ;
+#136 = EDGE_CURVE ( 'NONE', #330, #319, #11, .T. ) ;
+#137 = EDGE_LOOP ( 'NONE', ( #246, #48 ) ) ;
+#138 = VECTOR ( 'NONE', #283, 39.37007874015748100 ) ;
+#139 = LINE ( 'NONE', #96, #253 ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#141 = ORIENTED_EDGE ( 'NONE', *, *, #72, .F. ) ;
+#142 =( CONVERSION_BASED_UNIT ( 'INCH', #149 ) LENGTH_UNIT ( ) NAMED_UNIT ( #15 ) );
+#143 = ADVANCED_FACE ( 'NONE', ( #265 ), #7, .T. ) ;
+#144 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#145 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#146 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #206 ), #307 ) ;
+#147 = CLOSED_SHELL ( 'NONE', ( #169, #64, #257, #88, #316, #284, #143, #218, #41, #192 ) ) ;
+#148 = EDGE_LOOP ( 'NONE', ( #87, #248, #183, #65 ) ) ;
+#149 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #286 );
+#150 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.3149606299212598400 ) ) ;
+#152 = FACE_OUTER_BOUND ( 'NONE', #81, .T. ) ;
+#153 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#154 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Mag_Release_Bar', ( #55, #266 ), #294 ) ;
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #19, .T. ) ;
+#156 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#157 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#158 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#159 = EDGE_CURVE ( 'NONE', #56, #58, #70, .T. ) ;
+#160 = FACE_OUTER_BOUND ( 'NONE', #114, .T. ) ;
+#161 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#162 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #304 ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #76, .T. ) ;
+#164 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #264 ) ;
+#165 = LINE ( 'NONE', #320, #280 ) ;
+#166 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#167 = ORIENTED_EDGE ( 'NONE', *, *, #43, .T. ) ;
+#168 = EDGE_CURVE ( 'NONE', #39, #199, #139, .T. ) ;
+#169 = ADVANCED_FACE ( 'NONE', ( #133 ), #328, .T. ) ;
+#170 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#171 = AXIS2_PLACEMENT_3D ( 'NONE', #313, #166, #235 ) ;
+#172 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( -0.09842519685039370600, 0.0000000000000000000, 0.3149606299212598400 ) ) ;
+#174 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#175 = FACE_OUTER_BOUND ( 'NONE', #282, .T. ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#177 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#178 = PLANE ( 'NONE',  #301 ) ;
+#179 = CIRCLE ( 'NONE', #171, 0.05708661417322834200 ) ;
+#180 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#181 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#182 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#183 = ORIENTED_EDGE ( 'NONE', *, *, #232, .T. ) ;
+#184 = SHAPE_DEFINITION_REPRESENTATION ( #164, #154 ) ;
+#185 = SURFACE_SIDE_STYLE ('',( #82 ) ) ;
+#186 = FACE_OUTER_BOUND ( 'NONE', #314, .T. ) ;
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #197, .T. ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( 4.724160037882481500, -0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#189 = LINE ( 'NONE', #140, #138 ) ;
+#190 = CYLINDRICAL_SURFACE ( 'NONE', #305, 0.1574803149606300000 ) ;
+#191 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#192 = ADVANCED_FACE ( 'NONE', ( #152 ), #190, .T. ) ;
+#193 = ORIENTED_EDGE ( 'NONE', *, *, #94, .F. ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( 0.05708661417322834200, 6.991093932140401900E-018, 0.1574803149606299200 ) ) ;
+#195 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#196 = PLANE ( 'NONE',  #326 ) ;
+#197 = EDGE_CURVE ( 'NONE', #39, #330, #251, .T. ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#199 = VERTEX_POINT ( 'NONE', #202 ) ;
+#200 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#201 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#202 = CARTESIAN_POINT ( 'NONE',  ( 4.724160037882481500, 0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#203 = VECTOR ( 'NONE', #180, 39.37007874015748100 ) ;
+#204 = EDGE_CURVE ( 'NONE', #26, #213, #210, .T. ) ;
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #159, .T. ) ;
+#206 = STYLED_ITEM ( 'NONE', ( #236 ), #55 ) ;
+#207 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#208 = CARTESIAN_POINT ( 'NONE',  ( 0.05708661417322834200, 6.991093932140401900E-018, 0.1574803149606299200 ) ) ;
+#209 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#210 = CIRCLE ( 'NONE', #310, 0.09842519685039370600 ) ;
+#211 = ORIENTED_EDGE ( 'NONE', *, *, #116, .F. ) ;
+#212 = ORIENTED_EDGE ( 'NONE', *, *, #28, .T. ) ;
+#213 = VERTEX_POINT ( 'NONE', #23 ) ;
+#214 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#215 = LINE ( 'NONE', #173, #79 ) ;
+#216 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.09842519685039370600, 0.3149606299212598400 ) ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #72, .T. ) ;
+#218 = ADVANCED_FACE ( 'NONE', ( #61 ), #178, .T. ) ;
+#219 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#220 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #159, .F. ) ;
+#222 = CARTESIAN_POINT ( 'NONE',  ( 0.05708661417322834200, 6.991093932140401900E-018, 0.0000000000000000000 ) ) ;
+#223 = CIRCLE ( 'NONE', #322, 0.1574803149606300000 ) ;
+#224 = ORIENTED_EDGE ( 'NONE', *, *, #43, .F. ) ;
+#225 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#226 = CARTESIAN_POINT ( 'NONE',  ( -0.05708661417322834200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#227 = VECTOR ( 'NONE', #57, 39.37007874015748100 ) ;
+#228 = PLANE ( 'NONE',  #296 ) ;
+#229 = VECTOR ( 'NONE', #44, 39.37007874015748100 ) ;
+#230 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#231 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#232 = EDGE_CURVE ( 'NONE', #26, #71, #124, .T. ) ;
+#233 = ORIENTED_EDGE ( 'NONE', *, *, #19, .F. ) ;
+#234 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#235 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#236 = PRESENTATION_STYLE_ASSIGNMENT (( #117 ) ) ;
+#237 = VECTOR ( 'NONE', #66, 39.37007874015748100 ) ;
+#238 = ORIENTED_EDGE ( 'NONE', *, *, #94, .T. ) ;
+#239 = CARTESIAN_POINT ( 'NONE',  ( -0.05708661417322834200, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#240 = VERTEX_POINT ( 'NONE', #226 ) ;
+#241 = FILL_AREA_STYLE_COLOUR ( '', #214 ) ;
+#242 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#243 = EDGE_CURVE ( 'NONE', #289, #277, #245, .T. ) ;
+#244 = EDGE_LOOP ( 'NONE', ( #141, #205, #238, #60 ) ) ;
+#245 = CIRCLE ( 'NONE', #303, 0.05708661417322834200 ) ;
+#246 = ORIENTED_EDGE ( 'NONE', *, *, #243, .T. ) ;
+#247 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#248 = ORIENTED_EDGE ( 'NONE', *, *, #76, .F. ) ;
+#249 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#250 = FACE_OUTER_BOUND ( 'NONE', #135, .T. ) ;
+#251 = CIRCLE ( 'NONE', #317, 0.09842519685039370600 ) ;
+#252 = VERTEX_POINT ( 'NONE', #74 ) ;
+#253 = VECTOR ( 'NONE', #263, 39.37007874015748100 ) ;
+#254 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #73 ) ) ;
+#255 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ;
+#256 = SURFACE_SIDE_STYLE ('',( #285 ) ) ;
+#257 = ADVANCED_FACE ( 'NONE', ( #186 ), #306, .T. ) ;
+#258 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#259 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #73, .NOT_KNOWN. ) ;
+#260 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #209 );
+#261 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#262 = CARTESIAN_POINT ( 'NONE',  ( 4.566679722921851000, 0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#263 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#264 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #259, #46 ) ;
+#265 = FACE_OUTER_BOUND ( 'NONE', #270, .T. ) ;
+#266 = AXIS2_PLACEMENT_3D ( 'NONE', #182, #108, #276 ) ;
+#267 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ;
+#268 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#269 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#270 = EDGE_LOOP ( 'NONE', ( #83, #129, #163, #187 ) ) ;
+#271 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#272 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#273 = VECTOR ( 'NONE', #36, 39.37007874015748100 ) ;
+#274 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #99 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #54, #231, #80 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#275 = CIRCLE ( 'NONE', #323, 0.05708661417322834200 ) ;
+#276 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#277 = VERTEX_POINT ( 'NONE', #208 ) ;
+#278 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #281 ), #274 ) ;
+#279 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #281 ) ) ;
+#280 = VECTOR ( 'NONE', #287, 39.37007874015748100 ) ;
+#281 = STYLED_ITEM ( 'NONE', ( #16 ), #154 ) ;
+#282 = EDGE_LOOP ( 'NONE', ( #53, #18, #10, #267 ) ) ;
+#283 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#284 = ADVANCED_FACE ( 'NONE', ( #115 ), #228, .T. ) ;
+#285 = SURFACE_STYLE_FILL_AREA ( #89 ) ;
+#286 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#287 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#288 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#289 = VERTEX_POINT ( 'NONE', #30 ) ;
+#290 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#291 = AXIS2_PLACEMENT_3D ( 'NONE', #272, #158, #4 ) ;
+#292 = VECTOR ( 'NONE', #90, 39.37007874015748100 ) ;
+#293 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#294 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #86 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #78, #249, #107 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#295 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#296 = AXIS2_PLACEMENT_3D ( 'NONE', #181, #77, #247 ) ;
+#297 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ;
+#298 = AXIS2_PLACEMENT_3D ( 'NONE', #2, #271, #52 ) ;
+#299 = PLANE ( 'NONE',  #291 ) ;
+#300 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #25, #156, #1 ) ;
+#302 = LINE ( 'NONE', #194, #237 ) ;
+#303 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #300, #157 ) ;
+#304 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#305 = AXIS2_PLACEMENT_3D ( 'NONE', #45, #100, #268 ) ;
+#306 = CYLINDRICAL_SURFACE ( 'NONE', #298, 0.05708661417322834200 ) ;
+#307 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #113 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #142, #318, #170 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#308 = AXIS2_PLACEMENT_3D ( 'NONE', #261, #120, #290 ) ;
+#309 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #325, #177 ) ;
+#310 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #269, #127 ) ;
+#311 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #150, #324 ) ;
+#312 = AXIS2_PLACEMENT_3D ( 'NONE', #123, #295, #153 ) ;
+#313 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1574803149606299200 ) ) ;
+#314 = EDGE_LOOP ( 'NONE', ( #24, #12, #212, #75 ) ) ;
+#315 = FACE_OUTER_BOUND ( 'NONE', #68, .T. ) ;
+#316 = ADVANCED_FACE ( 'NONE', ( #315, #50 ), #299, .F. ) ;
+#317 = AXIS2_PLACEMENT_3D ( 'NONE', #207, #51, #225 ) ;
+#318 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#319 = VERTEX_POINT ( 'NONE', #130 ) ;
+#320 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.09842519685039370600, 0.1574803149606299200 ) ) ;
+#321 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #21, #201 ) ;
+#322 = AXIS2_PLACEMENT_3D ( 'NONE', #262, #122, #293 ) ;
+#323 = AXIS2_PLACEMENT_3D ( 'NONE', #174, #20, #200 ) ;
+#324 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#325 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#326 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #288, #145 ) ;
+#327 = LINE ( 'NONE', #239, #273 ) ;
+#328 = CYLINDRICAL_SURFACE ( 'NONE', #309, 0.09842519685039370600 ) ;
+#329 = AXIS2_PLACEMENT_3D ( 'NONE', #258, #144, #219 ) ;
+#330 = VERTEX_POINT ( 'NONE', #32 ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Mag_Release_Cover.step

@@ -0,0 +1,726 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Mag_Release_Cover.step',
+    '2014-05-14T06:09:11',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( 0.3343724766011815800, -0.01968503937007877800, 0.1909448818897638000 ) ) ;
+#2 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#3 = ORIENTED_EDGE ( 'NONE', *, *, #564, .T. ) ;
+#4 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#5 = ORIENTED_EDGE ( 'NONE', *, *, #278, .F. ) ;
+#6 = DIRECTION ( 'NONE',  ( 0.9488292830168392200, 0.3157894736842107300, 0.0000000000000000000 ) ) ;
+#7 = AXIS2_PLACEMENT_3D ( 'NONE', #576, #29, #131 ) ;
+#8 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#9 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#10 = CIRCLE ( 'NONE', #42, 0.03937007874015748000 ) ;
+#11 = ADVANCED_FACE ( 'NONE', ( #699 ), #99, .T. ) ;
+#12 = CARTESIAN_POINT ( 'NONE',  ( 0.5118110236220473300, -0.07874015748031496000, 0.2303149606299212700 ) ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4133858267716535300, 0.2303149606299212700 ) ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 0.05905511811023622700, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #314, .T. ) ;
+#16 = VERTEX_POINT ( 'NONE', #287 ) ;
+#17 = FILL_AREA_STYLE_COLOUR ( '', #183 ) ;
+#18 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#19 = ORIENTED_EDGE ( 'NONE', *, *, #494, .T. ) ;
+#20 = CARTESIAN_POINT ( 'NONE',  ( -0.01968503937007876800, 1.280553747030124900E-018, 0.2303149606299212700 ) ) ;
+#21 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#22 = CYLINDRICAL_SURFACE ( 'NONE', #194, 0.03937007874015748000 ) ;
+#23 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#24 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#25 = AXIS2_PLACEMENT_3D ( 'NONE', #400, #80, #458 ) ;
+#26 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 6.938893903907228400E-015, -1.000000000000000000 ) ) ;
+#27 = VERTEX_POINT ( 'NONE', #345 ) ;
+#28 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ;
+#29 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#30 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#31 = LINE ( 'NONE', #680, #598 ) ;
+#32 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#33 = ORIENTED_EDGE ( 'NONE', *, *, #480, .T. ) ;
+#34 = ORIENTED_EDGE ( 'NONE', *, *, #340, .T. ) ;
+#35 = CARTESIAN_POINT ( 'NONE',  ( 0.05905511811023624700, 7.232166136696970400E-018, 0.0000000000000000000 ) ) ;
+#36 = EDGE_CURVE ( 'NONE', #247, #552, #364, .T. ) ;
+#37 = FACE_OUTER_BOUND ( 'NONE', #635, .T. ) ;
+#38 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#39 = PRESENTATION_STYLE_ASSIGNMENT (( #442 ) ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150624600E-019, -0.01968503937007876800, 0.1909448818897638000 ) ) ;
+#41 = ORIENTED_EDGE ( 'NONE', *, *, #36, .T. ) ;
+#42 = AXIS2_PLACEMENT_3D ( 'NONE', #397, #78, #454 ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #340, .F. ) ;
+#44 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4527559055118110500, 0.1909448818897638000 ) ) ;
+#45 = CIRCLE ( 'NONE', #109, 0.05905511811023622700 ) ;
+#46 = AXIS2_PLACEMENT_3D ( 'NONE', #638, #285, #690 ) ;
+#47 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #126, #515, #188 ) ;
+#49 = ORIENTED_EDGE ( 'NONE', *, *, #591, .F. ) ;
+#50 = EDGE_LOOP ( 'NONE', ( #304, #696, #277, #368 ) ) ;
+#51 = FACE_OUTER_BOUND ( 'NONE', #75, .T. ) ;
+#52 = VECTOR ( 'NONE', #171, 39.37007874015748100 ) ;
+#53 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#54 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#55 = EDGE_LOOP ( 'NONE', ( #409, #610, #208, #34 ) ) ;
+#56 = EDGE_CURVE ( 'NONE', #247, #85, #681, .T. ) ;
+#57 = CIRCLE ( 'NONE', #59, 0.03937007874015748000 ) ;
+#58 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#59 = AXIS2_PLACEMENT_3D ( 'NONE', #687, #339, #26 ) ;
+#60 = ADVANCED_FACE ( 'NONE', ( #234 ), #350, .T. ) ;
+#61 = CARTESIAN_POINT ( 'NONE',  ( -0.05905511811023624700, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#62 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 9.130123557772668100E-016, 0.0000000000000000000 ) ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #579, .T. ) ;
+#64 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#65 = ADVANCED_FACE ( 'NONE', ( #84 ), #69, .T. ) ;
+#66 = ORIENTED_EDGE ( 'NONE', *, *, #384, .F. ) ;
+#67 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#68 = CARTESIAN_POINT ( 'NONE',  ( 0.3343724766011815800, -0.01968503937007877800, 0.1909448818897638000 ) ) ;
+#69 = CYLINDRICAL_SURFACE ( 'NONE', #258, 0.05905511811023624700 ) ;
+#70 = CARTESIAN_POINT ( 'NONE',  ( 0.6892495706429129200, -0.01968503937007878800, 0.1909448818897638000 ) ) ;
+#71 = ORIENTED_EDGE ( 'NONE', *, *, #358, .T. ) ;
+#72 = SURFACE_SIDE_STYLE ('',( #445 ) ) ;
+#73 = CYLINDRICAL_SURFACE ( 'NONE', #597, 0.03937007874015748000 ) ;
+#74 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#75 = EDGE_LOOP ( 'NONE', ( #663, #691 ) ) ;
+#76 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#77 = LINE ( 'NONE', #13, #205 ) ;
+#78 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#79 = AXIS2_PLACEMENT_3D ( 'NONE', #179, #387, #563 ) ;
+#80 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#81 = VERTEX_POINT ( 'NONE', #521 ) ;
+#82 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, -0.05905511811023624700, 0.1909448818897638000 ) ) ;
+#83 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#84 = FACE_OUTER_BOUND ( 'NONE', #408, .T. ) ;
+#85 = VERTEX_POINT ( 'NONE', #196 ) ;
+#86 = VECTOR ( 'NONE', #553, 39.37007874015748100 ) ;
+#87 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#88 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#89 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.252606517456513300E-017, 0.0000000000000000000 ) ) ;
+#90 = AXIS2_PLACEMENT_3D ( 'NONE', #568, #233, #630 ) ;
+#91 = VECTOR ( 'NONE', #325, 39.37007874015748100 ) ;
+#92 = AXIS2_PLACEMENT_3D ( 'NONE', #70, #441, #116 ) ;
+#93 = VERTEX_POINT ( 'NONE', #82 ) ;
+#94 = ORIENTED_EDGE ( 'NONE', *, *, #450, .F. ) ;
+#95 = ORIENTED_EDGE ( 'NONE', *, *, #358, .F. ) ;
+#96 = FACE_OUTER_BOUND ( 'NONE', #425, .T. ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #354, .F. ) ;
+#98 = AXIS2_PLACEMENT_3D ( 'NONE', #627, #275, #678 ) ;
+#99 = TOROIDAL_SURFACE ( 'NONE', #291, 0.01968503937007874000, 0.03937007874015748000 ) ;
+#100 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#101 = CIRCLE ( 'NONE', #147, 0.05905511811023627500 ) ;
+#102 = AXIS2_PLACEMENT_3D ( 'NONE', #383, #67, #436 ) ;
+#103 = CIRCLE ( 'NONE', #535, 0.05905511811023622700 ) ;
+#104 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#105 = VERTEX_POINT ( 'NONE', #134 ) ;
+#106 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #338, 'distance_accuracy_value', 'NONE');
+#107 = ORIENTED_EDGE ( 'NONE', *, *, #577, .T. ) ;
+#108 = ADVANCED_FACE ( 'NONE', ( #230 ), #584, .F. ) ;
+#109 = AXIS2_PLACEMENT_3D ( 'NONE', #444, #121, #510 ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( -0.05905511811023622700, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#111 = ADVANCED_FACE ( 'NONE', ( #210 ), #648, .T. ) ;
+#112 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#113 = ORIENTED_EDGE ( 'NONE', *, *, #344, .F. ) ;
+#114 = CIRCLE ( 'NONE', #653, 0.03937007874015748000 ) ;
+#115 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 8.673617379884028600E-016, 0.0000000000000000000 ) ) ;
+#116 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 8.673617379884028600E-016, 0.0000000000000000000 ) ) ;
+#117 = ORIENTED_EDGE ( 'NONE', *, *, #278, .T. ) ;
+#118 = AXIS2_PLACEMENT_3D ( 'NONE', #498, #173, #558 ) ;
+#119 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#120 = ORIENTED_EDGE ( 'NONE', *, *, #519, .T. ) ;
+#121 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#122 = FILL_AREA_STYLE_COLOUR ( '', #47 ) ;
+#123 = CIRCLE ( 'NONE', #159, 0.05905511811023624700 ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( 0.8464566929133858800, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#125 = AXIS2_PLACEMENT_3D ( 'NONE', #430, #377, #555 ) ;
+#126 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031495400, 0.4133858267716535900, 0.1909448818897638000 ) ) ;
+#127 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #354, .T. ) ;
+#129 = AXIS2_PLACEMENT_3D ( 'NONE', #164, #374, #8 ) ;
+#130 = VERTEX_POINT ( 'NONE', #462 ) ;
+#131 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4133858267716535300, 0.1909448818897638000 ) ) ;
+#133 = TOROIDAL_SURFACE ( 'NONE', #705, 0.1870078740157480600, 0.03937007874015748000 ) ;
+#134 = CARTESIAN_POINT ( 'NONE',  ( 0.05905511811023622700, 0.3937007874015748300, 0.0000000000000000000 ) ) ;
+#135 = AXIS2_PLACEMENT_3D ( 'NONE', #336, #23, #393 ) ;
+#136 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #282, 'distance_accuracy_value', 'NONE');
+#137 = PLANE ( 'NONE',  #238 ) ;
+#138 = ORIENTED_EDGE ( 'NONE', *, *, #464, .T. ) ;
+#139 = AXIS2_PLACEMENT_3D ( 'NONE', #12, #381, #62 ) ;
+#140 = ORIENTED_EDGE ( 'NONE', *, *, #488, .T. ) ;
+#141 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#142 = CIRCLE ( 'NONE', #191, 0.05905511811023627500 ) ;
+#143 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #119 );
+#144 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150624600E-019, -0.01968503937007876800, 0.2303149606299212700 ) ) ;
+#145 = EDGE_LOOP ( 'NONE', ( #404, #517, #486, #66 ) ) ;
+#146 = ORIENTED_EDGE ( 'NONE', *, *, #370, .F. ) ;
+#147 = AXIS2_PLACEMENT_3D ( 'NONE', #221, #614, #270 ) ;
+#148 = CIRCLE ( 'NONE', #46, 0.03937007874015748000 ) ;
+#149 = AXIS2_PLACEMENT_3D ( 'NONE', #427, #104, #492 ) ;
+#150 = AXIS2_PLACEMENT_3D ( 'NONE', #667, #322, #4 ) ;
+#151 = VERTEX_POINT ( 'NONE', #199 ) ;
+#152 = ORIENTED_EDGE ( 'NONE', *, *, #556, .F. ) ;
+#153 = PLANE ( 'NONE',  #180 ) ;
+#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#155 = TOROIDAL_SURFACE ( 'NONE', #168, 0.01968503937007876800, 0.03937007874015748000 ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3937007874015748300, 0.0000000000000000000 ) ) ;
+#157 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #548, #218 ) ;
+#158 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.252606517456513300E-017, 0.0000000000000000000 ) ) ;
+#159 = AXIS2_PLACEMENT_3D ( 'NONE', #664, #318, #2 ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #534, .F. ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#162 = ORIENTED_EDGE ( 'NONE', *, *, #556, .T. ) ;
+#163 = DIRECTION ( 'NONE',  ( 0.3157894736842103400, 0.9488292830168394400, 0.0000000000000000000 ) ) ;
+#164 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#165 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #545, #216 ) ;
+#166 = ADVANCED_FACE ( 'NONE', ( #482 ), #137, .F. ) ;
+#167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#168 = AXIS2_PLACEMENT_3D ( 'NONE', #312, #100, #214 ) ;
+#169 = LINE ( 'NONE', #124, #324 ) ;
+#170 = PLANE ( 'NONE',  #125 ) ;
+#171 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#172 = ADVANCED_FACE ( 'NONE', ( #506 ), #629, .T. ) ;
+#173 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#174 = AXIS2_PLACEMENT_3D ( 'NONE', #365, #53, #422 ) ;
+#175 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 6.505213034913026600E-017, 0.0000000000000000000 ) ) ;
+#176 = ORIENTED_EDGE ( 'NONE', *, *, #406, .T. ) ;
+#177 = ORIENTED_EDGE ( 'NONE', *, *, #370, .T. ) ;
+#178 = CARTESIAN_POINT ( 'NONE',  ( -0.01968503937007876800, 1.280553747030124900E-018, 0.1909448818897638000 ) ) ;
+#179 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#180 = AXIS2_PLACEMENT_3D ( 'NONE', #602, #261, #662 ) ;
+#181 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#182 = FACE_OUTER_BOUND ( 'NONE', #242, .T. ) ;
+#183 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#184 = CARTESIAN_POINT ( 'NONE',  ( 0.6892495706429129200, -0.01968503937007878800, 0.1909448818897638000 ) ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #314, .F. ) ;
+#186 = FILL_AREA_STYLE ('',( #122 ) ) ;
+#187 = VERTEX_POINT ( 'NONE', #351 ) ;
+#188 = DIRECTION ( 'NONE',  ( 6.938893903907234700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#189 = VERTEX_POINT ( 'NONE', #35 ) ;
+#190 = CIRCLE ( 'NONE', #135, 0.01968503937007876800 ) ;
+#191 = AXIS2_PLACEMENT_3D ( 'NONE', #484, #154, #541 ) ;
+#192 = EDGE_CURVE ( 'NONE', #566, #16, #466, .T. ) ;
+#193 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#194 = AXIS2_PLACEMENT_3D ( 'NONE', #40, #89, #470 ) ;
+#195 = ORIENTED_EDGE ( 'NONE', *, *, #580, .T. ) ;
+#196 = CARTESIAN_POINT ( 'NONE',  ( 0.8464566929133858800, 7.232166136696975000E-018, 0.0000000000000000000 ) ) ;
+#197 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #509, 'distance_accuracy_value', 'NONE');
+#198 = ORIENTED_EDGE ( 'NONE', *, *, #538, .T. ) ;
+#199 = CARTESIAN_POINT ( 'NONE',  ( 0.6518940870595729700, -0.03211769581433906300, 0.1909448818897638300 ) ) ;
+#200 = CIRCLE ( 'NONE', #213, 0.03937007874015748000 ) ;
+#201 = LINE ( 'NONE', #621, #52 ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #476, .T. ) ;
+#203 = AXIS2_PLACEMENT_3D ( 'NONE', #527, #592, #141 ) ;
+#204 = DIRECTION ( 'NONE',  ( 6.505213034913026600E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#205 = VECTOR ( 'NONE', #226, 39.37007874015748100 ) ;
+#206 = EDGE_CURVE ( 'NONE', #566, #316, #659, .T. ) ;
+#207 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #637 );
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #192, .T. ) ;
+#209 = ORIENTED_EDGE ( 'NONE', *, *, #511, .T. ) ;
+#210 = FACE_OUTER_BOUND ( 'NONE', #50, .T. ) ;
+#211 = ORIENTED_EDGE ( 'NONE', *, *, #56, .T. ) ;
+#212 = LINE ( 'NONE', #61, #86 ) ;
+#213 = AXIS2_PLACEMENT_3D ( 'NONE', #500, #403, #418 ) ;
+#214 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#215 = DIRECTION ( 'NONE',  ( -6.505213034913026600E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#216 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #416, .T. ) ;
+#218 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#219 = CIRCLE ( 'NONE', #92, 0.03937007874015751400 ) ;
+#220 = CARTESIAN_POINT ( 'NONE',  ( 0.7283464566929134200, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#221 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#222 = AXIS2_PLACEMENT_3D ( 'NONE', #589, #410, #88 ) ;
+#223 = AXIS2_PLACEMENT_3D ( 'NONE', #652, #300, #700 ) ;
+#224 = EDGE_LOOP ( 'NONE', ( #19, #585, #569, #562 ) ) ;
+#225 = ADVANCED_FACE ( 'NONE', ( #51 ), #526, .F. ) ;
+#226 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#227 = AXIS2_PLACEMENT_3D ( 'NONE', #294, #407, #523 ) ;
+#228 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#229 = AXIS2_PLACEMENT_3D ( 'NONE', #697, #355, #38 ) ;
+#230 = FACE_OUTER_BOUND ( 'NONE', #255, .T. ) ;
+#231 = DIRECTION ( 'NONE',  ( 6.505213034913026600E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#232 = VECTOR ( 'NONE', #58, 39.37007874015748100 ) ;
+#233 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#234 = FACE_OUTER_BOUND ( 'NONE', #337, .T. ) ;
+#235 = CARTESIAN_POINT ( 'NONE',  ( -0.05905511811023624700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#236 = ORIENTED_EDGE ( 'NONE', *, *, #504, .F. ) ;
+#237 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#238 = AXIS2_PLACEMENT_3D ( 'NONE', #586, #248, #647 ) ;
+#239 = SURFACE_STYLE_USAGE ( .BOTH. , #575 ) ;
+#240 = LINE ( 'NONE', #551, #91 ) ;
+#241 = CARTESIAN_POINT ( 'NONE',  ( 0.5118110236220473300, -0.07874015748031496000, 0.1909448818897638300 ) ) ;
+#242 = EDGE_LOOP ( 'NONE', ( #5, #389, #414, #217 ) ) ;
+#243 = EDGE_LOOP ( 'NONE', ( #202, #704, #533, #317 ) ) ;
+#244 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#245 = AXIS2_PLACEMENT_3D ( 'NONE', #244, #641, #83 ) ;
+#246 = VECTOR ( 'NONE', #423, 39.37007874015748100 ) ;
+#247 = VERTEX_POINT ( 'NONE', #297 ) ;
+#248 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#249 = EDGE_CURVE ( 'NONE', #706, #321, #333, .T. ) ;
+#250 = EDGE_LOOP ( 'NONE', ( #97, #305, #162, #702 ) ) ;
+#251 = CARTESIAN_POINT ( 'NONE',  ( -0.01968503937007874000, 0.3937007874015748300, 0.2303149606299212700 ) ) ;
+#252 = CIRCLE ( 'NONE', #150, 0.05905511811023624700 ) ;
+#253 = FACE_OUTER_BOUND ( 'NONE', #224, .T. ) ;
+#254 = ORIENTED_EDGE ( 'NONE', *, *, #456, .T. ) ;
+#255 = EDGE_LOOP ( 'NONE', ( #43, #260 ) ) ;
+#256 = AXIS2_PLACEMENT_3D ( 'NONE', #460, #292, #693 ) ;
+#257 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Mag_Release_Cover', ( #642, #474 ), #528 ) ;
+#258 = AXIS2_PLACEMENT_3D ( 'NONE', #347, #402, #692 ) ;
+#259 = LINE ( 'NONE', #608, #246 ) ;
+#260 = ORIENTED_EDGE ( 'NONE', *, *, #646, .F. ) ;
+#261 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #391, .T. ) ;
+#263 = CARTESIAN_POINT ( 'NONE',  ( 0.05905511811023624700, 7.232166136696970400E-018, 0.2303149606299212700 ) ) ;
+#264 = CIRCLE ( 'NONE', #165, 0.05905511811023622700 ) ;
+#265 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.252606517456513300E-017, 0.0000000000000000000 ) ) ;
+#266 = AXIS2_PLACEMENT_3D ( 'NONE', #132, #289, #399 ) ;
+#267 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#268 = ORIENTED_EDGE ( 'NONE', *, *, #360, .T. ) ;
+#269 = VERTEX_POINT ( 'NONE', #251 ) ;
+#270 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#271 = ADVANCED_FACE ( 'NONE', ( #37 ), #298, .T. ) ;
+#272 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#273 = ADVANCED_FACE ( 'NONE', ( #182 ), #22, .T. ) ;
+#274 = CARTESIAN_POINT ( 'NONE',  ( 0.5118110236220473300, -0.07874015748031496000, 0.1909448818897638300 ) ) ;
+#275 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#276 = VERTEX_POINT ( 'NONE', #529 ) ;
+#277 = ORIENTED_EDGE ( 'NONE', *, *, #480, .F. ) ;
+#278 = EDGE_CURVE ( 'NONE', #367, #419, #603, .T. ) ;
+#279 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#280 = VECTOR ( 'NONE', #204, 39.37007874015748100 ) ;
+#281 = CARTESIAN_POINT ( 'NONE',  ( -0.01968503937007876800, 1.280553747030124900E-018, 0.2303149606299212700 ) ) ;
+#282 =( CONVERSION_BASED_UNIT ( 'INCH', #207 ) LENGTH_UNIT ( ) NAMED_UNIT ( #18 ) );
+#283 = EDGE_LOOP ( 'NONE', ( #95, #152 ) ) ;
+#284 = VERTEX_POINT ( 'NONE', #654 ) ;
+#285 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#286 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #127, 'design' ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( -0.05905511811023622700, 0.3937007874015748300, 0.0000000000000000000 ) ) ;
+#288 = CIRCLE ( 'NONE', #48, 0.03937007874015744500 ) ;
+#289 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#290 = ORIENTED_EDGE ( 'NONE', *, *, #577, .F. ) ;
+#291 = AXIS2_PLACEMENT_3D ( 'NONE', #32, #357, #661 ) ;
+#292 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#293 = VERTEX_POINT ( 'NONE', #302 ) ;
+#294 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#295 = ORIENTED_EDGE ( 'NONE', *, *, #206, .T. ) ;
+#296 = ORIENTED_EDGE ( 'NONE', *, *, #531, .F. ) ;
+#297 = CARTESIAN_POINT ( 'NONE',  ( 0.8464566929133858800, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#298 = CYLINDRICAL_SURFACE ( 'NONE', #203, 0.05905511811023627500 ) ;
+#299 = CYLINDRICAL_SURFACE ( 'NONE', #557, 0.03937007874015748000 ) ;
+#300 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#301 = EDGE_CURVE ( 'NONE', #367, #81, #200, .T. ) ;
+#302 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4133858267716535900, 0.2303149606299212700 ) ) ;
+#303 = VERTEX_POINT ( 'NONE', #413 ) ;
+#304 = ORIENTED_EDGE ( 'NONE', *, *, #476, .F. ) ;
+#305 = ORIENTED_EDGE ( 'NONE', *, *, #542, .T. ) ;
+#306 = EDGE_LOOP ( 'NONE', ( #359, #195, #636, #473, #295 ) ) ;
+#307 = VECTOR ( 'NONE', #571, 39.37007874015748100 ) ;
+#308 = SHAPE_DEFINITION_REPRESENTATION ( #478, #257 ) ;
+#309 = ORIENTED_EDGE ( 'NONE', *, *, #344, .T. ) ;
+#310 = AXIS2_PLACEMENT_3D ( 'NONE', #518, #193, #581 ) ;
+#311 = ORIENTED_EDGE ( 'NONE', *, *, #432, .F. ) ;
+#312 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#313 = VECTOR ( 'NONE', #87, 39.37007874015748100 ) ;
+#314 = EDGE_CURVE ( 'NONE', #303, #566, #421, .T. ) ;
+#315 = FACE_OUTER_BOUND ( 'NONE', #658, .T. ) ;
+#316 = VERTEX_POINT ( 'NONE', #44 ) ;
+#317 = ORIENTED_EDGE ( 'NONE', *, *, #469, .F. ) ;
+#318 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#319 = EDGE_LOOP ( 'NONE', ( #177, #448, #117, #262, #468, #176, #626, #650, #346, #254 ) ) ;
+#320 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#321 = VERTEX_POINT ( 'NONE', #481 ) ;
+#322 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#323 = DIRECTION ( 'NONE',  ( 0.3157894736842107900, -0.9488292830168392200, 0.0000000000000000000 ) ) ;
+#324 = VECTOR ( 'NONE', #683, 39.37007874015748100 ) ;
+#325 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -3.252606517456513300E-017, 0.0000000000000000000 ) ) ;
+#326 = ADVANCED_FACE ( 'NONE', ( #443 ), #153, .F. ) ;
+#327 = EDGE_CURVE ( 'NONE', #85, #537, #142, .T. ) ;
+#328 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#329 = ORIENTED_EDGE ( 'NONE', *, *, #504, .T. ) ;
+#330 = ADVANCED_FACE ( 'NONE', ( #709 ), #155, .T. ) ;
+#331 = EDGE_CURVE ( 'NONE', #552, #93, #411, .T. ) ;
+#332 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#333 = CIRCLE ( 'NONE', #223, 0.05905511811023624700 ) ;
+#334 = VECTOR ( 'NONE', #272, 39.37007874015748100 ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3937007874015748300, 0.0000000000000000000 ) ) ;
+#336 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#337 = EDGE_LOOP ( 'NONE', ( #33, #645, #507, #643 ) ) ;
+#338 =( CONVERSION_BASED_UNIT ( 'INCH', #657 ) LENGTH_UNIT ( ) NAMED_UNIT ( #567 ) );
+#339 = DIRECTION ( 'NONE',  ( -6.938893903907221300E-015, -1.000000000000000000, -6.938893903907227600E-015 ) ) ;
+#340 = EDGE_CURVE ( 'NONE', #16, #105, #264, .T. ) ;
+#341 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#342 = CIRCLE ( 'NONE', #98, 0.03937007874015748000 ) ;
+#343 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#344 = EDGE_CURVE ( 'NONE', #706, #303, #123, .T. ) ;
+#345 = CARTESIAN_POINT ( 'NONE',  ( 0.3343724766011815800, -0.05905511811023625400, 0.1909448818897638000 ) ) ;
+#346 = ORIENTED_EDGE ( 'NONE', *, *, #450, .T. ) ;
+#347 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#348 = EDGE_LOOP ( 'NONE', ( #578, #674, #198 ) ) ;
+#349 = EDGE_CURVE ( 'NONE', #93, #81, #573, .T. ) ;
+#350 = CYLINDRICAL_SURFACE ( 'NONE', #266, 0.03937007874015748000 ) ;
+#351 = CARTESIAN_POINT ( 'NONE',  ( 0.3343724766011815800, -0.01968503937007877800, 0.2303149606299212700 ) ) ;
+#352 = EDGE_LOOP ( 'NONE', ( #497, #268, #612, #107, #380 ) ) ;
+#353 = LINE ( 'NONE', #433, #334 ) ;
+#354 = EDGE_CURVE ( 'NONE', #321, #303, #701, .T. ) ;
+#355 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#356 = CYLINDRICAL_SURFACE ( 'NONE', #129, 0.05905511811023627500 ) ;
+#357 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#358 = EDGE_CURVE ( 'NONE', #463, #189, #252, .T. ) ;
+#359 = ORIENTED_EDGE ( 'NONE', *, *, #579, .F. ) ;
+#360 = EDGE_CURVE ( 'NONE', #247, #93, #546, .T. ) ;
+#361 = EDGE_CURVE ( 'NONE', #537, #85, #101, .T. ) ;
+#362 = VECTOR ( 'NONE', #30, 39.37007874015748100 ) ;
+#363 = LINE ( 'NONE', #263, #232 ) ;
+#364 = CIRCLE ( 'NONE', #310, 0.05905511811023627500 ) ;
+#365 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#366 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.252606517456513300E-017, 0.0000000000000000000 ) ) ;
+#367 = VERTEX_POINT ( 'NONE', #708 ) ;
+#368 = ORIENTED_EDGE ( 'NONE', *, *, #406, .F. ) ;
+#369 = FACE_OUTER_BOUND ( 'NONE', #319, .T. ) ;
+#370 = EDGE_CURVE ( 'NONE', #540, #187, #240, .T. ) ;
+#371 = CARTESIAN_POINT ( 'NONE',  ( 0.7283464566929134200, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#372 = SPHERICAL_SURFACE ( 'NONE', #520, 0.03937007874015748000 ) ;
+#373 = CLOSED_SHELL ( 'NONE', ( #271, #172, #434, #273, #326, #616, #108, #65, #376, #382, #225, #166, #111, #60, #560, #11, #669, #623, #554, #330, #495, #501, #675 ) ) ;
+#374 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#375 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150624600E-019, -0.01968503937007876800, 0.1909448818897638000 ) ) ;
+#376 = ADVANCED_FACE ( 'NONE', ( #686 ), #356, .T. ) ;
+#377 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#378 = ORIENTED_EDGE ( 'NONE', *, *, #327, .T. ) ;
+#379 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#380 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ;
+#381 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#382 = ADVANCED_FACE ( 'NONE', ( #369 ), #170, .T. ) ;
+#383 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.3937007874015748300, 0.2303149606299212700 ) ) ;
+#384 = EDGE_CURVE ( 'NONE', #187, #367, #530, .T. ) ;
+#385 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#386 = CIRCLE ( 'NONE', #634, 0.03937007874015754900 ) ;
+#387 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#388 = FILL_AREA_STYLE ('',( #17 ) ) ;
+#389 = ORIENTED_EDGE ( 'NONE', *, *, #301, .T. ) ;
+#390 = CARTESIAN_POINT ( 'NONE',  ( 0.8070866141732283600, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#391 = EDGE_CURVE ( 'NONE', #419, #440, #666, .T. ) ;
+#392 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#393 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#394 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#395 = VECTOR ( 'NONE', #265, 39.37007874015748100 ) ;
+#396 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#397 = CARTESIAN_POINT ( 'NONE',  ( 0.8070866141732283600, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#398 = VERTEX_POINT ( 'NONE', #620 ) ;
+#399 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#400 = CARTESIAN_POINT ( 'NONE',  ( -0.01968503937007874000, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#401 = EDGE_CURVE ( 'NONE', #440, #284, #655, .T. ) ;
+#402 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#403 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -3.252606517456513300E-017, 0.0000000000000000000 ) ) ;
+#404 = ORIENTED_EDGE ( 'NONE', *, *, #534, .T. ) ;
+#405 = CIRCLE ( 'NONE', #649, 0.03937007874015748000 ) ;
+#406 = EDGE_CURVE ( 'NONE', #284, #130, #514, .T. ) ;
+#407 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#408 = EDGE_LOOP ( 'NONE', ( #479, #453, #309, #3, #71 ) ) ;
+#409 = ORIENTED_EDGE ( 'NONE', *, *, #580, .F. ) ;
+#410 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#411 = CIRCLE ( 'NONE', #174, 0.05905511811023627500 ) ;
+#412 = EDGE_CURVE ( 'NONE', #130, #293, #77, .T. ) ;
+#413 = CARTESIAN_POINT ( 'NONE',  ( -0.05905511811023624700, 3.841661241090371700E-018, 0.1909448818897638000 ) ) ;
+#414 = ORIENTED_EDGE ( 'NONE', *, *, #349, .F. ) ;
+#415 = SPHERICAL_SURFACE ( 'NONE', #7, 0.03937007874015748000 ) ;
+#416 = EDGE_CURVE ( 'NONE', #93, #419, #342, .T. ) ;
+#417 = ORIENTED_EDGE ( 'NONE', *, *, #522, .T. ) ;
+#418 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#419 = VERTEX_POINT ( 'NONE', #502 ) ;
+#420 = EDGE_CURVE ( 'NONE', #81, #151, #219, .T. ) ;
+#421 = LINE ( 'NONE', #594, #280 ) ;
+#422 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#423 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#424 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150624600E-019, -0.01968503937007876800, 0.2303149606299212700 ) ) ;
+#425 = EDGE_LOOP ( 'NONE', ( #595, #120, #146, #428 ) ) ;
+#426 = ORIENTED_EDGE ( 'NONE', *, *, #349, .T. ) ;
+#427 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#428 = ORIENTED_EDGE ( 'NONE', *, *, #522, .F. ) ;
+#429 = DIRECTION ( 'NONE',  ( -3.252606517456513300E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#430 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#431 = FACE_OUTER_BOUND ( 'NONE', #625, .T. ) ;
+#432 = EDGE_CURVE ( 'NONE', #293, #269, #640, .T. ) ;
+#433 = CARTESIAN_POINT ( 'NONE',  ( 0.7283464566929134200, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#434 = ADVANCED_FACE ( 'NONE', ( #475 ), #615, .T. ) ;
+#435 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#436 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#437 = EDGE_CURVE ( 'NONE', #566, #611, #45, .T. ) ;
+#438 = ORIENTED_EDGE ( 'NONE', *, *, #437, .T. ) ;
+#439 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#440 = VERTEX_POINT ( 'NONE', #390 ) ;
+#441 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#442 = SURFACE_STYLE_USAGE ( .BOTH. , #72 ) ;
+#443 = FACE_OUTER_BOUND ( 'NONE', #618, .T. ) ;
+#444 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#445 = SURFACE_STYLE_FILL_AREA ( #388 ) ;
+#446 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.252606517456513300E-017, 0.0000000000000000000 ) ) ;
+#447 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #513 ) ;
+#448 = ORIENTED_EDGE ( 'NONE', *, *, #384, .T. ) ;
+#449 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#450 = EDGE_CURVE ( 'NONE', #269, #707, #455, .T. ) ;
+#451 = PRODUCT_CONTEXT ( 'NONE', #513, 'mechanical' ) ;
+#452 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #671 ) ) ;
+#453 = ORIENTED_EDGE ( 'NONE', *, *, #249, .F. ) ;
+#454 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#455 = LINE ( 'NONE', #20, #307 ) ;
+#456 = EDGE_CURVE ( 'NONE', #707, #540, #190, .T. ) ;
+#457 = PRESENTATION_STYLE_ASSIGNMENT (( #239 ) ) ;
+#458 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#459 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #671, .NOT_KNOWN. ) ;
+#460 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#461 = EDGE_LOOP ( 'NONE', ( #209, #113, #417, #588 ) ) ;
+#462 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031495400, 0.4133858267716535300, 0.2303149606299212700 ) ) ;
+#463 = VERTEX_POINT ( 'NONE', #235 ) ;
+#464 = EDGE_CURVE ( 'NONE', #27, #706, #31, .T. ) ;
+#465 = CARTESIAN_POINT ( 'NONE',  ( -0.05905511811023622700, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#466 = LINE ( 'NONE', #465, #313 ) ;
+#467 = FACE_OUTER_BOUND ( 'NONE', #55, .T. ) ;
+#468 = ORIENTED_EDGE ( 'NONE', *, *, #401, .T. ) ;
+#469 = EDGE_CURVE ( 'NONE', #398, #247, #169, .T. ) ;
+#470 = DIRECTION ( 'NONE',  ( -3.252606517456513300E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#471 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #459, #286 ) ;
+#472 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -3.252606517456513300E-017, 0.0000000000000000000 ) ) ;
+#473 = ORIENTED_EDGE ( 'NONE', *, *, #192, .F. ) ;
+#474 = AXIS2_PLACEMENT_3D ( 'NONE', #237, #396, #76 ) ;
+#475 = FACE_OUTER_BOUND ( 'NONE', #306, .T. ) ;
+#476 = EDGE_CURVE ( 'NONE', #398, #284, #57, .T. ) ;
+#477 = VERTEX_POINT ( 'NONE', #574 ) ;
+#478 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #471 ) ;
+#479 = ORIENTED_EDGE ( 'NONE', *, *, #542, .F. ) ;
+#480 = EDGE_CURVE ( 'NONE', #130, #477, #288, .T. ) ;
+#481 = CARTESIAN_POINT ( 'NONE',  ( 0.05905511811023624700, 7.232166136696970400E-018, 0.1909448818897638000 ) ) ;
+#482 = FACE_OUTER_BOUND ( 'NONE', #283, .T. ) ;
+#483 = CIRCLE ( 'NONE', #593, 0.03937007874015751400 ) ;
+#484 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#485 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #136 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #282, #688, #341 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#486 = ORIENTED_EDGE ( 'NONE', *, *, #538, .F. ) ;
+#487 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150624600E-019, -0.01968503937007876800, 0.1909448818897638000 ) ) ;
+#488 = EDGE_CURVE ( 'NONE', #293, #316, #148, .T. ) ;
+#489 = CARTESIAN_POINT ( 'NONE',  ( 0.3343724766011815800, -0.01968503937007877800, 0.1909448818897638000 ) ) ;
+#490 = VECTOR ( 'NONE', #624, 39.37007874015748100 ) ;
+#491 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #512 ), #485 ) ;
+#492 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#493 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 3.252606517456513300E-017, 0.0000000000000000000 ) ) ;
+#494 = EDGE_CURVE ( 'NONE', #247, #440, #10, .T. ) ;
+#495 = ADVANCED_FACE ( 'NONE', ( #431 ), #415, .T. ) ;
+#496 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #512 ) ) ;
+#497 = ORIENTED_EDGE ( 'NONE', *, *, #56, .F. ) ;
+#498 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#499 = ORIENTED_EDGE ( 'NONE', *, *, #469, .T. ) ;
+#500 = CARTESIAN_POINT ( 'NONE',  ( 0.6892495706429129200, -0.01968503937007878800, 0.1909448818897638000 ) ) ;
+#501 = ADVANCED_FACE ( 'NONE', ( #582 ), #133, .T. ) ;
+#502 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, -0.01968503937007876800, 0.2303149606299212700 ) ) ;
+#503 = CARTESIAN_POINT ( 'NONE',  ( 0.8464566929133858800, 7.232166136696975000E-018, 0.2303149606299212700 ) ) ;
+#504 = EDGE_CURVE ( 'NONE', #269, #566, #703, .T. ) ;
+#505 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#506 = FACE_OUTER_BOUND ( 'NONE', #250, .T. ) ;
+#507 = ORIENTED_EDGE ( 'NONE', *, *, #488, .F. ) ;
+#508 = CYLINDRICAL_SURFACE ( 'NONE', #606, 0.03937007874015748000 ) ;
+#509 =( CONVERSION_BASED_UNIT ( 'INCH', #143 ) LENGTH_UNIT ( ) NAMED_UNIT ( #628 ) );
+#510 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#511 = EDGE_CURVE ( 'NONE', #707, #303, #561, .T. ) ;
+#512 = STYLED_ITEM ( 'NONE', ( #457 ), #257 ) ;
+#513 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#514 = CIRCLE ( 'NONE', #102, 0.01968503937007875700 ) ;
+#515 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -6.938893903907234700E-015, 0.0000000000000000000 ) ) ;
+#516 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #127 ) ;
+#517 = ORIENTED_EDGE ( 'NONE', *, *, #587, .F. ) ;
+#518 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#519 = EDGE_CURVE ( 'NONE', #27, #187, #114, .T. ) ;
+#520 = AXIS2_PLACEMENT_3D ( 'NONE', #184, #631, #682 ) ;
+#521 = CARTESIAN_POINT ( 'NONE',  ( 0.6892495706429129200, -0.05905511811023627500, 0.1909448818897638000 ) ) ;
+#522 = EDGE_CURVE ( 'NONE', #706, #540, #405, .T. ) ;
+#523 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#524 = AXIS2_PLACEMENT_3D ( 'NONE', #679, #279, #74 ) ;
+#525 = FACE_OUTER_BOUND ( 'NONE', #243, .T. ) ;
+#526 = PLANE ( 'NONE',  #222 ) ;
+#527 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#528 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #106 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #338, #24, #394 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#529 = CARTESIAN_POINT ( 'NONE',  ( 0.3717279601845217000, -0.03211769581433902800, 0.1909448818897638300 ) ) ;
+#530 = CIRCLE ( 'NONE', #139, 0.1870078740157480600 ) ;
+#531 = EDGE_CURVE ( 'NONE', #398, #477, #694, .T. ) ;
+#532 = EDGE_CURVE ( 'NONE', #316, #477, #259, .T. ) ;
+#533 = ORIENTED_EDGE ( 'NONE', *, *, #494, .F. ) ;
+#534 = EDGE_CURVE ( 'NONE', #187, #276, #536, .T. ) ;
+#535 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #21, #392 ) ;
+#536 = CIRCLE ( 'NONE', #639, 0.03937007874015747300 ) ;
+#537 = VERTEX_POINT ( 'NONE', #371 ) ;
+#538 = EDGE_CURVE ( 'NONE', #367, #151, #386, .T. ) ;
+#539 = ORIENTED_EDGE ( 'NONE', *, *, #331, .T. ) ;
+#540 = VERTEX_POINT ( 'NONE', #424 ) ;
+#541 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#542 = EDGE_CURVE ( 'NONE', #321, #189, #363, .T. ) ;
+#543 = CARTESIAN_POINT ( 'NONE',  ( -0.01968503937007876800, 1.280553747030124900E-018, 0.1909448818897638000 ) ) ;
+#544 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #197 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #509, #181, #570 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#545 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#546 = CIRCLE ( 'NONE', #149, 0.05905511811023627500 ) ;
+#547 = DIRECTION ( 'NONE',  ( -3.252606517456513300E-017, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#548 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#549 = DIRECTION ( 'NONE',  ( -0.9488292830168392200, 0.3157894736842103400, 0.0000000000000000000 ) ) ;
+#550 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #583 ), #544 ) ;
+#551 = CARTESIAN_POINT ( 'NONE',  ( -6.402768735150624600E-019, -0.01968503937007876800, 0.2303149606299212700 ) ) ;
+#552 = VERTEX_POINT ( 'NONE', #220 ) ;
+#553 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#554 = ADVANCED_FACE ( 'NONE', ( #96 ), #508, .T. ) ;
+#555 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#556 = EDGE_CURVE ( 'NONE', #189, #463, #660, .T. ) ;
+#557 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #231, #175 ) ;
+#558 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#559 = ORIENTED_EDGE ( 'NONE', *, *, #511, .F. ) ;
+#560 = ADVANCED_FACE ( 'NONE', ( #525 ), #73, .T. ) ;
+#561 = CIRCLE ( 'NONE', #656, 0.03937007874015748000 ) ;
+#562 = ORIENTED_EDGE ( 'NONE', *, *, #360, .F. ) ;
+#563 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#564 = EDGE_CURVE ( 'NONE', #303, #463, #212, .T. ) ;
+#565 = AXIS2_PLACEMENT_3D ( 'NONE', #505, #228, #385 ) ;
+#566 = VERTEX_POINT ( 'NONE', #110 ) ;
+#567 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#568 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3937007874015748300, 0.2303149606299212700 ) ) ;
+#569 = ORIENTED_EDGE ( 'NONE', *, *, #416, .F. ) ;
+#570 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#571 = DIRECTION ( 'NONE',  ( -6.505213034913026600E-017, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#572 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #583 ) ) ;
+#573 = LINE ( 'NONE', #607, #395 ) ;
+#574 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031492100, 0.4527559055118110500, 0.1909448818897638000 ) ) ;
+#575 = SURFACE_SIDE_STYLE ('',( #619 ) ) ;
+#576 = CARTESIAN_POINT ( 'NONE',  ( 0.3343724766011815800, -0.01968503937007877800, 0.1909448818897638000 ) ) ;
+#577 = EDGE_CURVE ( 'NONE', #552, #537, #353, .T. ) ;
+#578 = ORIENTED_EDGE ( 'NONE', *, *, #420, .F. ) ;
+#579 = EDGE_CURVE ( 'NONE', #611, #316, #651, .T. ) ;
+#580 = EDGE_CURVE ( 'NONE', #611, #105, #201, .T. ) ;
+#581 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#582 = FACE_OUTER_BOUND ( 'NONE', #145, .T. ) ;
+#583 = STYLED_ITEM ( 'NONE', ( #39 ), #642 ) ;
+#584 = PLANE ( 'NONE',  #256 ) ;
+#585 = ORIENTED_EDGE ( 'NONE', *, *, #391, .F. ) ;
+#586 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#587 = EDGE_CURVE ( 'NONE', #151, #276, #677, .T. ) ;
+#588 = ORIENTED_EDGE ( 'NONE', *, *, #456, .F. ) ;
+#589 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#590 = VECTOR ( 'NONE', #472, 39.37007874015748100 ) ;
+#591 = EDGE_CURVE ( 'NONE', #276, #27, #483, .T. ) ;
+#592 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#593 = AXIS2_PLACEMENT_3D ( 'NONE', #68, #439, #115 ) ;
+#594 = CARTESIAN_POINT ( 'NONE',  ( -0.05905511811023624700, 3.841661241090371700E-018, 0.1909448818897638000 ) ) ;
+#595 = ORIENTED_EDGE ( 'NONE', *, *, #464, .F. ) ;
+#596 = ORIENTED_EDGE ( 'NONE', *, *, #206, .F. ) ;
+#597 = AXIS2_PLACEMENT_3D ( 'NONE', #617, #167, #670 ) ;
+#598 = VECTOR ( 'NONE', #446, 39.37007874015748100 ) ;
+#599 = ORIENTED_EDGE ( 'NONE', *, *, #587, .T. ) ;
+#600 = EDGE_LOOP ( 'NONE', ( #140, #596, #236, #311 ) ) ;
+#601 = AXIS2_PLACEMENT_3D ( 'NONE', #64, #435, #112 ) ;
+#602 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#603 = LINE ( 'NONE', #144, #590 ) ;
+#604 = CYLINDRICAL_SURFACE ( 'NONE', #565, 0.05905511811023622700 ) ;
+#605 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -6.505213034913026600E-017, 0.0000000000000000000 ) ) ;
+#606 = AXIS2_PLACEMENT_3D ( 'NONE', #375, #493, #429 ) ;
+#607 = CARTESIAN_POINT ( 'NONE',  ( -1.920830620545185800E-018, -0.05905511811023624700, 0.1909448818897638000 ) ) ;
+#608 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4527559055118110500, 0.1909448818897638000 ) ) ;
+#609 = ORIENTED_EDGE ( 'NONE', *, *, #420, .T. ) ;
+#610 = ORIENTED_EDGE ( 'NONE', *, *, #437, .F. ) ;
+#611 = VERTEX_POINT ( 'NONE', #14 ) ;
+#612 = ORIENTED_EDGE ( 'NONE', *, *, #331, .F. ) ;
+#613 = AXIS2_PLACEMENT_3D ( 'NONE', #328, #9, #379 ) ;
+#614 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#615 = CYLINDRICAL_SURFACE ( 'NONE', #79, 0.05905511811023622700 ) ;
+#616 = ADVANCED_FACE ( 'NONE', ( #467 ), #604, .T. ) ;
+#617 = CARTESIAN_POINT ( 'NONE',  ( 0.8070866141732283600, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#618 = EDGE_LOOP ( 'NONE', ( #426, #609, #599, #685, #138, #672, #128, #15, #438, #63, #28, #296, #499, #41, #539 ) ) ;
+#619 = SURFACE_STYLE_FILL_AREA ( #186 ) ;
+#620 = CARTESIAN_POINT ( 'NONE',  ( 0.8464566929133858800, 0.3937007874015744400, 0.1909448818897638000 ) ) ;
+#621 = CARTESIAN_POINT ( 'NONE',  ( 0.05905511811023622700, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#622 = AXIS2_PLACEMENT_3D ( 'NONE', #274, #676, #332 ) ;
+#623 = ADVANCED_FACE ( 'NONE', ( #315 ), #299, .T. ) ;
+#624 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#625 = EDGE_LOOP ( 'NONE', ( #695, #49, #160 ) ) ;
+#626 = ORIENTED_EDGE ( 'NONE', *, *, #412, .T. ) ;
+#627 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, -0.01968503937007876800, 0.1909448818897638000 ) ) ;
+#628 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#629 = CYLINDRICAL_SURFACE ( 'NONE', #227, 0.05905511811023624700 ) ;
+#630 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#631 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#632 = FACE_OUTER_BOUND ( 'NONE', #348, .T. ) ;
+#633 = CARTESIAN_POINT ( 'NONE',  ( -1.920830620545185800E-018, -0.05905511811023624700, 0.1909448818897638000 ) ) ;
+#634 = AXIS2_PLACEMENT_3D ( 'NONE', #668, #323, #6 ) ;
+#635 = EDGE_LOOP ( 'NONE', ( #698, #211, #378, #290 ) ) ;
+#636 = ORIENTED_EDGE ( 'NONE', *, *, #646, .T. ) ;
+#637 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#638 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4133858267716535300, 0.1909448818897638000 ) ) ;
+#639 = AXIS2_PLACEMENT_3D ( 'NONE', #489, #163, #549 ) ;
+#640 = CIRCLE ( 'NONE', #90, 0.01968503937007874000 ) ;
+#641 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#642 = MANIFOLD_SOLID_BREP ( 'Fillet2', #373 ) ;
+#643 = ORIENTED_EDGE ( 'NONE', *, *, #412, .F. ) ;
+#644 = AXIS2_PLACEMENT_3D ( 'NONE', #267, #665, #320 ) ;
+#645 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ;
+#646 = EDGE_CURVE ( 'NONE', #105, #16, #103, .T. ) ;
+#647 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#648 = TOROIDAL_SURFACE ( 'NONE', #245, 0.01968503937007875700, 0.03937007874015748000 ) ;
+#649 = AXIS2_PLACEMENT_3D ( 'NONE', #487, #158, #547 ) ;
+#650 = ORIENTED_EDGE ( 'NONE', *, *, #432, .T. ) ;
+#651 = CIRCLE ( 'NONE', #601, 0.05905511811023622700 ) ;
+#652 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#653 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #366, #54 ) ;
+#654 = CARTESIAN_POINT ( 'NONE',  ( 0.8070866141732283600, 0.3937007874015744400, 0.2303149606299212700 ) ) ;
+#655 = LINE ( 'NONE', #673, #490 ) ;
+#656 = AXIS2_PLACEMENT_3D ( 'NONE', #543, #215, #605 ) ;
+#657 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #684 );
+#658 = EDGE_LOOP ( 'NONE', ( #329, #185, #559, #94 ) ) ;
+#659 = CIRCLE ( 'NONE', #229, 0.05905511811023622700 ) ;
+#660 = CIRCLE ( 'NONE', #613, 0.05905511811023624700 ) ;
+#661 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#662 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#663 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ;
+#664 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#665 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#666 = CIRCLE ( 'NONE', #118, 0.01968503937007875700 ) ;
+#667 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#668 = CARTESIAN_POINT ( 'NONE',  ( 0.6892495706429129200, -0.01968503937007878800, 0.1909448818897638000 ) ) ;
+#669 = ADVANCED_FACE ( 'NONE', ( #253 ), #689, .T. ) ;
+#670 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#671 = PRODUCT ( 'Mag_Release_Cover', 'Mag_Release_Cover', '', ( #451 ) ) ;
+#672 = ORIENTED_EDGE ( 'NONE', *, *, #249, .T. ) ;
+#673 = CARTESIAN_POINT ( 'NONE',  ( 0.8070866141732283600, 0.0000000000000000000, 0.2303149606299212700 ) ) ;
+#674 = ORIENTED_EDGE ( 'NONE', *, *, #301, .F. ) ;
+#675 = ADVANCED_FACE ( 'NONE', ( #632 ), #372, .T. ) ;
+#676 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#677 = CIRCLE ( 'NONE', #622, 0.1476377952755906800 ) ;
+#678 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#679 = CARTESIAN_POINT ( 'NONE',  ( 0.7874015748031496500, 0.0000000000000000000, 0.1909448818897638000 ) ) ;
+#680 = CARTESIAN_POINT ( 'NONE',  ( -1.920830620545185800E-018, -0.05905511811023624700, 0.1909448818897638000 ) ) ;
+#681 = LINE ( 'NONE', #503, #362 ) ;
+#682 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#683 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#684 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#685 = ORIENTED_EDGE ( 'NONE', *, *, #591, .T. ) ;
+#686 = FACE_OUTER_BOUND ( 'NONE', #352, .T. ) ;
+#687 = CARTESIAN_POINT ( 'NONE',  ( 0.8070866141732283600, 0.3937007874015746600, 0.1909448818897638000 ) ) ;
+#688 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#689 = TOROIDAL_SURFACE ( 'NONE', #524, 0.01968503937007876800, 0.03937007874015748000 ) ;
+#690 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#691 = ORIENTED_EDGE ( 'NONE', *, *, #327, .F. ) ;
+#692 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#693 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#694 = CIRCLE ( 'NONE', #644, 0.05905511811023627500 ) ;
+#695 = ORIENTED_EDGE ( 'NONE', *, *, #519, .F. ) ;
+#696 = ORIENTED_EDGE ( 'NONE', *, *, #531, .T. ) ;
+#697 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.3937007874015748300, 0.1909448818897638000 ) ) ;
+#698 = ORIENTED_EDGE ( 'NONE', *, *, #36, .F. ) ;
+#699 = FACE_OUTER_BOUND ( 'NONE', #600, .T. ) ;
+#700 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#701 = CIRCLE ( 'NONE', #157, 0.05905511811023624700 ) ;
+#702 = ORIENTED_EDGE ( 'NONE', *, *, #564, .F. ) ;
+#703 = CIRCLE ( 'NONE', #25, 0.03937007874015748000 ) ;
+#704 = ORIENTED_EDGE ( 'NONE', *, *, #401, .F. ) ;
+#705 = AXIS2_PLACEMENT_3D ( 'NONE', #241, #343, #449 ) ;
+#706 = VERTEX_POINT ( 'NONE', #633 ) ;
+#707 = VERTEX_POINT ( 'NONE', #281 ) ;
+#708 = CARTESIAN_POINT ( 'NONE',  ( 0.6892495706429129200, -0.01968503937007878800, 0.2303149606299212700 ) ) ;
+#709 = FACE_OUTER_BOUND ( 'NONE', #461, .T. ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Mag_Release_Right.step

@@ -0,0 +1,719 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Mag_Release_Right.step',
+    '2014-05-14T06:09:39',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( 0.7071067811865476800, 0.7071067811865473500, 0.0000000000000000000 ) ) ;
+#2 = EDGE_LOOP ( 'NONE', ( #676, #465, #620, #221 ) ) ;
+#3 = CARTESIAN_POINT ( 'NONE',  ( 0.1948719475710957700, -0.3619050454891778500, 0.2559055118110235600 ) ) ;
+#4 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#5 = CARTESIAN_POINT ( 'NONE',  ( 0.1670330979180820500, -0.3897438951421915400, 0.09842519685039365100 ) ) ;
+#6 = CARTESIAN_POINT ( 'NONE',  ( -0.1574803149606299200, 3.414809992080329000E-017, 0.2559055118110236700 ) ) ;
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #450, .F. ) ;
+#8 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#9 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#10 = FACE_OUTER_BOUND ( 'NONE', #264, .T. ) ;
+#11 = CARTESIAN_POINT ( 'NONE',  ( -0.1574803149606299200, 3.414809992080329000E-017, 0.2952755905511810800 ) ) ;
+#12 = CIRCLE ( 'NONE', #326, 0.05905511811023620600 ) ;
+#13 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#14 = ORIENTED_EDGE ( 'NONE', *, *, #560, .T. ) ;
+#15 = CARTESIAN_POINT ( 'NONE',  ( 0.06959712413253399400, 0.06959712413253409100, 0.008217013878821953200 ) ) ;
+#16 = DIRECTION ( 'NONE',  ( -0.7071067811865468000, -0.7071067811865482400, 0.0000000000000000000 ) ) ;
+#17 = ORIENTED_EDGE ( 'NONE', *, *, #574, .T. ) ;
+#18 = CARTESIAN_POINT ( 'NONE',  ( 0.3897438951421915400, -0.1670330979180820500, -0.7738918995863138800 ) ) ;
+#19 = ORIENTED_EDGE ( 'NONE', *, *, #495, .F. ) ;
+#20 = CARTESIAN_POINT ( 'NONE',  ( -0.08351654895904084300, 4.723404964643381500E-017, 0.003088122341743614300 ) ) ;
+#21 = ORIENTED_EDGE ( 'NONE', *, *, #566, .T. ) ;
+#22 = CARTESIAN_POINT ( 'NONE',  ( 0.01391942482650647100, 0.09743597378554771900, 0.2952755905511810800 ) ) ;
+#23 = EDGE_LOOP ( 'NONE', ( #42, #21, #677, #451, #7 ) ) ;
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #493, .T. ) ;
+#25 = CIRCLE ( 'NONE', #331, 0.1574803149606299200 ) ;
+#26 = CARTESIAN_POINT ( 'NONE',  ( -0.02392334893221976000, -0.09577075193452490300, 0.003316925819795135900 ) ) ;
+#27 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#28 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #317, 'distance_accuracy_value', 'NONE');
+#29 = ORIENTED_EDGE ( 'NONE', *, *, #467, .T. ) ;
+#30 = ORIENTED_EDGE ( 'NONE', *, *, #528, .F. ) ;
+#31 = ORIENTED_EDGE ( 'NONE', *, *, #619, .F. ) ;
+#32 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#33 = ADVANCED_FACE ( 'NONE', ( #10 ), #532, .F. ) ;
+#34 = ORIENTED_EDGE ( 'NONE', *, *, #453, .F. ) ;
+#35 = VECTOR ( 'NONE', #141, 39.37007874015748100 ) ;
+#36 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#37 = DIRECTION ( 'NONE',  ( -0.7071067811865484600, -0.7071067811865466800, 0.0000000000000000000 ) ) ;
+#38 = ORIENTED_EDGE ( 'NONE', *, *, #480, .F. ) ;
+#39 = DIRECTION ( 'NONE',  ( 1.224646799147353200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#40 = FACE_BOUND ( 'NONE', #627, .T. ) ;
+#41 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Mag_Release_Right', ( #284, #199 ), #224 ) ;
+#42 = ORIENTED_EDGE ( 'NONE', *, *, #579, .F. ) ;
+#43 = CARTESIAN_POINT ( 'NONE',  ( -0.01832873316146268000, 0.06518781579757845800, 3.709348831229869700E-005 ) ) ;
+#44 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.2952755905511810800 ) ) ;
+#45 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#46 = VERTEX_POINT ( 'NONE', #675 ) ;
+#47 = SURFACE_SIDE_STYLE ('',( #630 ) ) ;
+#48 = DIRECTION ( 'NONE',  ( -0.7071067811865466800, -0.7071067811865484600, 0.0000000000000000000 ) ) ;
+#49 = PLANE ( 'NONE',  #225 ) ;
+#50 = CIRCLE ( 'NONE', #345, 0.1181102362204724100 ) ;
+#51 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#52 = CARTESIAN_POINT ( 'NONE',  ( 0.04175827447952040700, 0.04175827447952044200, 0.09842519685039365100 ) ) ;
+#53 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#54 = VERTEX_POINT ( 'NONE', #204 ) ;
+#55 = LINE ( 'NONE', #332, #321 ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, -0.7738918995863138800 ) ) ;
+#57 = FACE_OUTER_BOUND ( 'NONE', #231, .T. ) ;
+#58 = VERTEX_POINT ( 'NONE', #122 ) ;
+#59 = ORIENTED_EDGE ( 'NONE', *, *, #505, .F. ) ;
+#60 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#61 = CARTESIAN_POINT ( 'NONE',  ( 0.06959712413253399400, 0.06959712413253409100, 0.008217013878821953200 ) ) ;
+#62 = LINE ( 'NONE', #645, #491 ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( 0.08772402838621903800, 0.04527178705332726700, 0.006409135642703694800 ) ) ;
+#64 = FACE_OUTER_BOUND ( 'NONE', #23, .T. ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( -0.04516686955205459500, -0.08778234047567762300, 0.006396247047263979900 ) ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( -0.08351654895904099500, -0.08351654895904088400, 0.2559055118110236700 ) ) ;
+#67 = VECTOR ( 'NONE', #510, 39.37007874015748100 ) ;
+#68 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #378, 'distance_accuracy_value', 'NONE');
+#69 = CIRCLE ( 'NONE', #275, 0.05905511811023620600 ) ;
+#70 = ORIENTED_EDGE ( 'NONE', *, *, #525, .F. ) ;
+#71 = CYLINDRICAL_SURFACE ( 'NONE', #358, 0.09842519685039370600 ) ;
+#72 = ORIENTED_EDGE ( 'NONE', *, *, #459, .F. ) ;
+#73 = ADVANCED_FACE ( 'NONE', ( #228 ), #213, .T. ) ;
+#74 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#75 = FACE_OUTER_BOUND ( 'NONE', #673, .T. ) ;
+#76 = ADVANCED_FACE ( 'NONE', ( #660 ), #643, .T. ) ;
+#77 = ORIENTED_EDGE ( 'NONE', *, *, #475, .F. ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 0.2366302220506163200, -0.3201467710096573800, 0.09842519685039370600 ) ) ;
+#79 = LINE ( 'NONE', #18, #355 ) ;
+#80 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#81 = LINE ( 'NONE', #664, #652 ) ;
+#82 = CARTESIAN_POINT ( 'NONE',  ( 0.1113553986120545800, 0.1113553986120547100, 0.09842519685039365100 ) ) ;
+#83 = ORIENTED_EDGE ( 'NONE', *, *, #482, .F. ) ;
+#84 = ORIENTED_EDGE ( 'NONE', *, *, #468, .F. ) ;
+#85 = VERTEX_POINT ( 'NONE', #414 ) ;
+#86 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #242, #636, #300, #681, #363, #43, #425, #89 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 4 ),
+ ( 0.0005149771407264401700, 0.001391352734059994600, 0.002267728327393549000, 0.004020479514060659000 ),
+ .UNSPECIFIED. ) ;
+#87 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.2952755905511810800 ) ) ;
+#88 = PLANE ( 'NONE',  #404 ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( 0.01391942482650646700, 0.09743597378554771900, 0.008217013878821963600 ) ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( 0.08351654895904092600, 0.08351654895904099500, 0.2559055118110235600 ) ) ;
+#91 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#92 = TOROIDAL_SURFACE ( 'NONE', #366, 0.05905511811023622700, 0.09842519685039370600 ) ;
+#93 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, -0.7738918995863138800 ) ) ;
+#94 = SURFACE_STYLE_FILL_AREA ( #197 ) ;
+#95 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#96 = TOROIDAL_SURFACE ( 'NONE', #400, 0.1181102362204724500, 0.03937007874015748000 ) ;
+#97 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.0000000000000000000 ) ) ;
+#98 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #152, 'design' ) ;
+#99 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.2952755905511810800 ) ) ;
+#100 = VERTEX_POINT ( 'NONE', #469 ) ;
+#101 = DIRECTION ( 'NONE',  ( -0.7071067811865477900, 0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#102 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#103 = CLOSED_SHELL ( 'NONE', ( #471, #175, #172, #73, #76, #671, #581, #669, #33, #127, #129, #530, #625, #629, #289, #584, #229, #412, #417, #348, #352 ) ) ;
+#104 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#105 = VECTOR ( 'NONE', #389, 39.37007874015748100 ) ;
+#106 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#107 = CARTESIAN_POINT ( 'NONE',  ( 0.1113553986120546000, 0.1113553986120546900, 0.09842519685039365100 ) ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #450, .T. ) ;
+#109 = EDGE_LOOP ( 'NONE', ( #30, #168, #343, #59, #162 ) ) ;
+#110 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#111 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.2559055118110235600 ) ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #426, .F. ) ;
+#113 = VERTEX_POINT ( 'NONE', #531 ) ;
+#114 = CARTESIAN_POINT ( 'NONE',  ( 0.09575732102024307700, 0.02397721125919928200, 0.003324749219429443500 ) ) ;
+#115 = VERTEX_POINT ( 'NONE', #174 ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( 0.01391942482650675300, -0.09743597378554760800, 0.0000000000000000000 ) ) ;
+#117 = LINE ( 'NONE', #200, #674 ) ;
+#118 = CARTESIAN_POINT ( 'NONE',  ( -0.06414288170476931100, -0.07505136656029874600, 0.008217013878822001700 ) ) ;
+#119 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #116, #165, #662, #334, #26, #402, #65, #458, #118, #520 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 4 ),
+ ( 1.087521998828872000E-019, 0.0005787984488453958000, 0.001157596897690791600, 0.001736395346536187300, 0.002315193795381582800 ),
+ .UNSPECIFIED. ) ;
+#120 = DIRECTION ( 'NONE',  ( -0.7071067811865477900, -0.7071067811865473500, 0.0000000000000000000 ) ) ;
+#121 = EDGE_LOOP ( 'NONE', ( #342, #84, #416, #38 ) ) ;
+#122 = CARTESIAN_POINT ( 'NONE',  ( 0.2366302220506162900, -0.3201467710096573300, 0.0000000000000000000 ) ) ;
+#123 = ORIENTED_EDGE ( 'NONE', *, *, #445, .F. ) ;
+#124 = ORIENTED_EDGE ( 'NONE', *, *, #521, .T. ) ;
+#125 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #8 );
+#126 = ORIENTED_EDGE ( 'NONE', *, *, #499, .T. ) ;
+#127 = ADVANCED_FACE ( 'NONE', ( #75 ), #290, .T. ) ;
+#128 = VERTEX_POINT ( 'NONE', #582 ) ;
+#129 = ADVANCED_FACE ( 'NONE', ( #351 ), #88, .T. ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #476, .T. ) ;
+#131 = FACE_OUTER_BOUND ( 'NONE', #670, .T. ) ;
+#132 = DIRECTION ( 'NONE',  ( 0.7071067811865477900, 0.7071067811865471300, 0.0000000000000000000 ) ) ;
+#133 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#134 = EDGE_LOOP ( 'NONE', ( #542, #575, #588, #34 ) ) ;
+#135 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #61, #207, #398, #63, #452, #114, #516, #163, #570, #212 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 4 ),
+ ( 6.139160172469813800E-019, 0.0005788265723257183400, 0.001157653144651436000, 0.001736479716977153600, 0.002315306289302871200 ),
+ .UNSPECIFIED. ) ;
+#136 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #613, #269, #327, #20 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 4 ),
+ ( 0.0000000000000000000, 0.0005149771407264401700 ),
+ .UNSPECIFIED. ) ;
+#137 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#138 = ORIENTED_EDGE ( 'NONE', *, *, #525, .T. ) ;
+#139 = DIRECTION ( 'NONE',  ( -0.7071067811865479100, -0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#140 = ORIENTED_EDGE ( 'NONE', *, *, #475, .T. ) ;
+#141 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#142 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.2559055118110235600 ) ) ;
+#143 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#144 = CARTESIAN_POINT ( 'NONE',  ( 0.1670330979180820500, -0.3897438951421915400, -0.7738918995863138800 ) ) ;
+#145 = VERTEX_POINT ( 'NONE', #483 ) ;
+#146 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.2952755905511810800 ) ) ;
+#147 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#148 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#149 = LINE ( 'NONE', #603, #164 ) ;
+#150 = CARTESIAN_POINT ( 'NONE',  ( 0.3964987327506092100, -0.2783884965301368100, 0.2952755905511810800 ) ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.09842519685039365100 ) ) ;
+#152 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#153 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.2952755905511810800 ) ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.09842519685039365100 ) ) ;
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #561, .T. ) ;
+#156 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 1.734723475976807100E-015, 0.0000000000000000000 ) ) ;
+#157 = FACE_OUTER_BOUND ( 'NONE', #286, .T. ) ;
+#158 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#159 = DIRECTION ( 'NONE',  ( 0.7071067811865472400, -0.7071067811865479100, 0.0000000000000000000 ) ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #463, .F. ) ;
+#161 = DIRECTION ( 'NONE',  ( 0.7071067811865476800, -0.7071067811865473500, 0.0000000000000000000 ) ) ;
+#162 = ORIENTED_EDGE ( 'NONE', *, *, #517, .T. ) ;
+#163 = CARTESIAN_POINT ( 'NONE',  ( 0.09871088738445174500, 0.001325869110233389800, 0.0005704375472688046300 ) ) ;
+#164 = VECTOR ( 'NONE', #435, 39.37007874015748100 ) ;
+#165 = CARTESIAN_POINT ( 'NONE',  ( 0.006274958167792445500, -0.09852804045107824100, 7.503244611504626200E-020 ) ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( 0.1113553986120546000, 0.1113553986120546900, -0.7738918995863138800 ) ) ;
+#167 = CARTESIAN_POINT ( 'NONE',  ( -0.1113553986120546900, -0.1113553986120545500, -0.7738918995863138800 ) ) ;
+#168 = ORIENTED_EDGE ( 'NONE', *, *, #472, .F. ) ;
+#169 = FACE_OUTER_BOUND ( 'NONE', #282, .T. ) ;
+#170 = ORIENTED_EDGE ( 'NONE', *, *, #538, .T. ) ;
+#171 = ORIENTED_EDGE ( 'NONE', *, *, #511, .F. ) ;
+#172 = ADVANCED_FACE ( 'NONE', ( #399 ), #96, .T. ) ;
+#173 = VECTOR ( 'NONE', #383, 39.37007874015748100 ) ;
+#174 = CARTESIAN_POINT ( 'NONE',  ( 0.01391942482650675300, -0.09743597378554760800, 0.0000000000000000000 ) ) ;
+#175 = ADVANCED_FACE ( 'NONE', ( #64 ), #195, .T. ) ;
+#176 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#177 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.0000000000000000000 ) ) ;
+#178 = ORIENTED_EDGE ( 'NONE', *, *, #472, .T. ) ;
+#179 = CIRCLE ( 'NONE', #297, 0.09842519685039370600 ) ;
+#180 = CIRCLE ( 'NONE', #267, 0.09842519685039370600 ) ;
+#181 = EDGE_LOOP ( 'NONE', ( #155, #19, #250, #567, #602 ) ) ;
+#182 = ORIENTED_EDGE ( 'NONE', *, *, #428, .T. ) ;
+#183 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#184 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #241 ) ) ;
+#185 = CARTESIAN_POINT ( 'NONE',  ( 0.01391942482650647100, 0.09743597378554770500, 0.2952755905511810800 ) ) ;
+#186 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#187 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.2952755905511810800 ) ) ;
+#189 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 1.734723475976807100E-015, 0.0000000000000000000 ) ) ;
+#190 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#191 = LINE ( 'NONE', #648, #173 ) ;
+#192 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #241, .NOT_KNOWN. ) ;
+#193 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( 0.4358688114907667300, -0.2783884965301368100, 0.2559055118110235600 ) ) ;
+#195 = TOROIDAL_SURFACE ( 'NONE', #396, 0.05905511811023622700, 0.09842519685039370600 ) ;
+#196 = DIRECTION ( 'NONE',  ( -0.7071067811865461300, -0.7071067811865487900, -0.0000000000000000000 ) ) ;
+#197 = FILL_AREA_STYLE ('',( #254 ) ) ;
+#198 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #192, #98 ) ;
+#199 = AXIS2_PLACEMENT_3D ( 'NONE', #644, #439, #104 ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( -0.04175827447952043500, -0.04175827447952038700, 0.0000000000000000000 ) ) ;
+#201 = CIRCLE ( 'NONE', #301, 0.09842519685039369200 ) ;
+#202 = CIRCLE ( 'NONE', #276, 0.1574803149606299200 ) ;
+#203 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#204 = CARTESIAN_POINT ( 'NONE',  ( 0.1670330979180820500, -0.3897438951421915400, 0.2559055118110235600 ) ) ;
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #543, .F. ) ;
+#206 = CARTESIAN_POINT ( 'NONE',  ( 0.1670330979180820700, -0.3897438951421915400, 0.09842519685039370600 ) ) ;
+#207 = CARTESIAN_POINT ( 'NONE',  ( 0.07505279440079011500, 0.06414145386427797000, 0.008217013878821951400 ) ) ;
+#208 = TOROIDAL_SURFACE ( 'NONE', #354, 0.05905511811023622700, 0.09842519685039370600 ) ;
+#209 = CARTESIAN_POINT ( 'NONE',  ( -0.08351654895904084300, 4.723404964643381500E-017, 0.003088122341743614300 ) ) ;
+#210 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #28 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #317, #13, #382 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#211 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #216 ), #210 ) ;
+#212 = CARTESIAN_POINT ( 'NONE',  ( 0.09743597378554765000, -0.01391942482650673300, 0.0000000000000000000 ) ) ;
+#213 = CYLINDRICAL_SURFACE ( 'NONE', #411, 0.1574803149606299200 ) ;
+#214 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#215 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #216 ) ) ;
+#216 = STYLED_ITEM ( 'NONE', ( #657 ), #41 ) ;
+#217 = DIRECTION ( 'NONE',  ( -0.7071067811865472400, -0.7071067811865479100, 0.0000000000000000000 ) ) ;
+#218 = LINE ( 'NONE', #107, #650 ) ;
+#219 = CIRCLE ( 'NONE', #287, 0.03937007874015747300 ) ;
+#220 = AXIS2_PLACEMENT_3D ( 'NONE', #146, #372, #433 ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #434, .F. ) ;
+#222 = ORIENTED_EDGE ( 'NONE', *, *, #517, .F. ) ;
+#223 = VERTEX_POINT ( 'NONE', #682 ) ;
+#224 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #68 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #378, #51, #436 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#225 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #311, #492 ) ;
+#226 = FACE_OUTER_BOUND ( 'NONE', #121, .T. ) ;
+#227 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#228 = FACE_OUTER_BOUND ( 'NONE', #134, .T. ) ;
+#229 = ADVANCED_FACE ( 'NONE', ( #375 ), #518, .T. ) ;
+#230 = CARTESIAN_POINT ( 'NONE',  ( -0.1113553986120546800, -0.1113553986120545800, -0.7738918995863138800 ) ) ;
+#231 = EDGE_LOOP ( 'NONE', ( #519, #112, #283, #569 ) ) ;
+#232 = AXIS2_PLACEMENT_3D ( 'NONE', #93, #489, #45 ) ;
+#233 = CIRCLE ( 'NONE', #318, 0.03937007874015748000 ) ;
+#234 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#235 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -1.734723475976807500E-015, 0.0000000000000000000 ) ) ;
+#236 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #679, #485 ) ;
+#237 = ORIENTED_EDGE ( 'NONE', *, *, #444, .F. ) ;
+#238 = VERTEX_POINT ( 'NONE', #248 ) ;
+#239 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #552, #189 ) ;
+#240 = DIRECTION ( 'NONE',  ( 0.7071067811865477900, -0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#241 = PRODUCT ( 'Mag_Release_Right', 'Mag_Release_Right', '', ( #500 ) ) ;
+#242 = CARTESIAN_POINT ( 'NONE',  ( -0.08351654895904084300, 4.723404964643381500E-017, 0.003088122341743614300 ) ) ;
+#243 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#244 = VERTEX_POINT ( 'NONE', #638 ) ;
+#245 = AXIS2_PLACEMENT_3D ( 'NONE', #87, #186, #593 ) ;
+#246 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.2952755905511810800 ) ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( -0.08351654895904099500, -0.08351654895904088400, 0.2559055118110236700 ) ) ;
+#248 = CARTESIAN_POINT ( 'NONE',  ( 0.3619050454891778500, -0.1948719475710957400, 0.2952755905511810800 ) ) ;
+#249 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#250 = ORIENTED_EDGE ( 'NONE', *, *, #512, .F. ) ;
+#251 = AXIS2_PLACEMENT_3D ( 'NONE', #640, #307, #4 ) ;
+#252 = DIRECTION ( 'NONE',  ( 0.7071067811865472400, -0.7071067811865477900, 0.0000000000000000000 ) ) ;
+#253 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#254 = FILL_AREA_STYLE_COLOUR ( '', #227 ) ;
+#255 = ORIENTED_EDGE ( 'NONE', *, *, #476, .F. ) ;
+#256 = CARTESIAN_POINT ( 'NONE',  ( -0.09743597378554765000, -0.01391942482650680500, 0.008217013878821989600 ) ) ;
+#257 = SURFACE_STYLE_USAGE ( .BOTH. , #604 ) ;
+#258 = LINE ( 'NONE', #11, #403 ) ;
+#259 = DIRECTION ( 'NONE',  ( -0.7071067811865479100, 0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#260 = AXIS2_PLACEMENT_3D ( 'NONE', #544, #183, #589 ) ;
+#261 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #422, .T. ) ;
+#263 = AXIS2_PLACEMENT_3D ( 'NONE', #362, #39, #423 ) ;
+#264 = EDGE_LOOP ( 'NONE', ( #430, #306, #624, #70, #288, #564, #108, #124 ) ) ;
+#265 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#266 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #95 );
+#267 = AXIS2_PLACEMENT_3D ( 'NONE', #587, #240, #634 ) ;
+#268 = AXIS2_PLACEMENT_3D ( 'NONE', #479, #137, #541 ) ;
+#269 = CARTESIAN_POINT ( 'NONE',  ( -0.09286401094177436400, -0.009347461982733515700, 0.005959512494193398200 ) ) ;
+#270 = ORIENTED_EDGE ( 'NONE', *, *, #579, .T. ) ;
+#271 = CARTESIAN_POINT ( 'NONE',  ( -0.04175827447952044200, -0.04175827447952038000, 0.09842519685039370600 ) ) ;
+#272 = AXIS2_PLACEMENT_3D ( 'NONE', #678, #356, #37 ) ;
+#273 = ORIENTED_EDGE ( 'NONE', *, *, #499, .F. ) ;
+#274 = CIRCLE ( 'NONE', #330, 0.09842519685039344300 ) ;
+#275 = AXIS2_PLACEMENT_3D ( 'NONE', #177, #586, #235 ) ;
+#276 = AXIS2_PLACEMENT_3D ( 'NONE', #419, #80, #477 ) ;
+#277 = DIRECTION ( 'NONE',  ( 0.7071067811865479100, -0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#278 = EDGE_LOOP ( 'NONE', ( #123, #658, #126, #462 ) ) ;
+#279 = ORIENTED_EDGE ( 'NONE', *, *, #468, .T. ) ;
+#280 = AXIS2_PLACEMENT_3D ( 'NONE', #585, #234, #631 ) ;
+#281 = AXIS2_PLACEMENT_3D ( 'NONE', #78, #473, #132 ) ;
+#282 = EDGE_LOOP ( 'NONE', ( #262, #182, #554, #623, #562 ) ) ;
+#283 = ORIENTED_EDGE ( 'NONE', *, *, #533, .F. ) ;
+#284 = MANIFOLD_SOLID_BREP ( 'Fillet2', #103 ) ;
+#285 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #217, #618 ) ;
+#286 = EDGE_LOOP ( 'NONE', ( #77, #680, #338, #17 ) ) ;
+#287 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #461, #120 ) ;
+#288 = ORIENTED_EDGE ( 'NONE', *, *, #454, .T. ) ;
+#289 = ADVANCED_FACE ( 'NONE', ( #397 ), #367, .T. ) ;
+#290 = PLANE ( 'NONE',  #408 ) ;
+#291 = VECTOR ( 'NONE', #193, 39.37007874015748100 ) ;
+#292 = ORIENTED_EDGE ( 'NONE', *, *, #463, .T. ) ;
+#293 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#294 = AXIS2_PLACEMENT_3D ( 'NONE', #571, #214, #617 ) ;
+#295 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#296 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#297 = AXIS2_PLACEMENT_3D ( 'NONE', #271, #659, #328 ) ;
+#298 = VERTEX_POINT ( 'NONE', #312 ) ;
+#299 = CYLINDRICAL_SURFACE ( 'NONE', #236, 0.03937007874015748000 ) ;
+#300 = CARTESIAN_POINT ( 'NONE',  ( -0.06731324766233799700, 0.01620330129670294700, 0.0003445990302713031600 ) ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #513, #161, #568 ) ;
+#302 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#303 = VERTEX_POINT ( 'NONE', #5 ) ;
+#304 = AXIS2_PLACEMENT_3D ( 'NONE', #611, #265, #655 ) ;
+#305 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#306 = ORIENTED_EDGE ( 'NONE', *, *, #528, .T. ) ;
+#307 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#308 = DIRECTION ( 'NONE',  ( -0.7071067811865477900, 0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#309 = CARTESIAN_POINT ( 'NONE',  ( 0.4358688114907667300, -0.2783884965301368100, -0.7738918995863138800 ) ) ;
+#310 = ORIENTED_EDGE ( 'NONE', *, *, #440, .T. ) ;
+#311 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#312 = CARTESIAN_POINT ( 'NONE',  ( -0.09743597378554765000, -0.01391942482650680000, 0.2952755905511810800 ) ) ;
+#313 = AXIS2_PLACEMENT_3D ( 'NONE', #111, #507, #156 ) ;
+#314 = CARTESIAN_POINT ( 'NONE',  ( -0.04175827447952051900, 0.04175827447952051900, 0.2952755905511810800 ) ) ;
+#315 = CIRCLE ( 'NONE', #336, 0.09842519685039344300 ) ;
+#316 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.09842519685039372000 ) ) ;
+#317 =( CONVERSION_BASED_UNIT ( 'INCH', #515 ) LENGTH_UNIT ( ) NAMED_UNIT ( #296 ) );
+#318 = AXIS2_PLACEMENT_3D ( 'NONE', #653, #323, #16 ) ;
+#319 = CARTESIAN_POINT ( 'NONE',  ( 0.3897438951421915400, -0.1670330979180820500, 0.2559055118110235600 ) ) ;
+#320 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #380, #106 ) ;
+#321 = VECTOR ( 'NONE', #401, 39.37007874015748100 ) ;
+#322 = AXIS2_PLACEMENT_3D ( 'NONE', #154, #565, #203 ) ;
+#323 = DIRECTION ( 'NONE',  ( -0.7071067811865482400, 0.7071067811865468000, 0.0000000000000000000 ) ) ;
+#324 = CIRCLE ( 'NONE', #239, 0.1574803149606299200 ) ;
+#325 = EDGE_LOOP ( 'NONE', ( #509, #255, #83, #540 ) ) ;
+#326 = AXIS2_PLACEMENT_3D ( 'NONE', #385, #53, #442 ) ;
+#327 = CARTESIAN_POINT ( 'NONE',  ( -0.08821866699161448600, -0.004702118032573614700, 0.004294584105852847000 ) ) ;
+#328 = DIRECTION ( 'NONE',  ( 0.7071067811865476800, 0.7071067811865473500, 0.0000000000000000000 ) ) ;
+#329 = CIRCLE ( 'NONE', #373, 0.1181102362204724100 ) ;
+#330 = AXIS2_PLACEMENT_3D ( 'NONE', #607, #261, #649 ) ;
+#331 = AXIS2_PLACEMENT_3D ( 'NONE', #438, #102, #498 ) ;
+#332 = CARTESIAN_POINT ( 'NONE',  ( -0.09743597378554765000, -0.01391942482650680000, 0.2952755905511810800 ) ) ;
+#333 = PRESENTATION_STYLE_ASSIGNMENT (( #431 ) ) ;
+#334 = CARTESIAN_POINT ( 'NONE',  ( -0.01638786806301677200, -0.09734625430322521600, 0.002221320038739086700 ) ) ;
+#335 = AXIS2_PLACEMENT_3D ( 'NONE', #99, #496, #148 ) ;
+#336 = AXIS2_PLACEMENT_3D ( 'NONE', #598, #253, #642 ) ;
+#337 = CARTESIAN_POINT ( 'NONE',  ( -0.1574803149606299200, 3.414809992080329000E-017, 0.09842519685039372000 ) ) ;
+#338 = ORIENTED_EDGE ( 'NONE', *, *, #460, .F. ) ;
+#339 = LINE ( 'NONE', #22, #632 ) ;
+#340 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #370, #48 ) ;
+#341 = CIRCLE ( 'NONE', #263, 0.09842519685039370600 ) ;
+#342 = ORIENTED_EDGE ( 'NONE', *, *, #560, .F. ) ;
+#343 = ORIENTED_EDGE ( 'NONE', *, *, #538, .F. ) ;
+#344 = ORIENTED_EDGE ( 'NONE', *, *, #566, .F. ) ;
+#345 = AXIS2_PLACEMENT_3D ( 'NONE', #188, #595, #249 ) ;
+#346 = AXIS2_PLACEMENT_3D ( 'NONE', #429, #91, #488 ) ;
+#347 = CIRCLE ( 'NONE', #353, 0.1181102362204724500 ) ;
+#348 = ADVANCED_FACE ( 'NONE', ( #656 ), #71, .T. ) ;
+#349 = AXIS2_PLACEMENT_3D ( 'NONE', #52, #101, #379 ) ;
+#350 = DIRECTION ( 'NONE',  ( 0.7071067811865461300, 0.7071067811865487900, 0.0000000000000000000 ) ) ;
+#351 = FACE_OUTER_BOUND ( 'NONE', #393, .T. ) ;
+#352 = ADVANCED_FACE ( 'NONE', ( #226 ), #92, .T. ) ;
+#353 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #27, #546 ) ;
+#354 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #147, #9 ) ;
+#355 = VECTOR ( 'NONE', #60, 39.37007874015748100 ) ;
+#356 = DIRECTION ( 'NONE',  ( -0.7071067811865466800, 0.7071067811865484600, 0.0000000000000000000 ) ) ;
+#357 = VECTOR ( 'NONE', #293, 39.37007874015748100 ) ;
+#358 = AXIS2_PLACEMENT_3D ( 'NONE', #374, #252, #1 ) ;
+#359 = AXIS2_PLACEMENT_3D ( 'NONE', #90, #308, #597 ) ;
+#360 = ORIENTED_EDGE ( 'NONE', *, *, #453, .T. ) ;
+#361 = ORIENTED_EDGE ( 'NONE', *, *, #551, .F. ) ;
+#362 = CARTESIAN_POINT ( 'NONE',  ( -0.05905511811023622700, 4.138026605750025900E-017, 0.09842519685039372000 ) ) ;
+#363 = CARTESIAN_POINT ( 'NONE',  ( -0.04281106463847425500, 0.04070548432056678900, -1.304867582859011700E-005 ) ) ;
+#364 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #490, 'distance_accuracy_value', 'NONE');
+#365 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.09842519685039372000 ) ) ;
+#366 = AXIS2_PLACEMENT_3D ( 'NONE', #494, #641, #555 ) ;
+#367 = CYLINDRICAL_SURFACE ( 'NONE', #359, 0.03937007874015748000 ) ;
+#368 = FILL_AREA_STYLE ('',( #594 ) ) ;
+#369 = VERTEX_POINT ( 'NONE', #256 ) ;
+#370 = DIRECTION ( 'NONE',  ( -0.7071067811865480200, 0.7071067811865470200, 1.226634733346697300E-015 ) ) ;
+#371 = EDGE_LOOP ( 'NONE', ( #273, #576, #666, #130 ) ) ;
+#372 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#373 = AXIS2_PLACEMENT_3D ( 'NONE', #246, #637, #305 ) ;
+#374 = CARTESIAN_POINT ( 'NONE',  ( -0.04175827447952044200, -0.04175827447952038000, 0.09842519685039370600 ) ) ;
+#375 = FACE_OUTER_BOUND ( 'NONE', #410, .T. ) ;
+#376 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #364 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #490, #143, #553 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#377 = ORIENTED_EDGE ( 'NONE', *, *, #454, .F. ) ;
+#378 =( CONVERSION_BASED_UNIT ( 'INCH', #125 ) LENGTH_UNIT ( ) NAMED_UNIT ( #133 ) );
+#379 = DIRECTION ( 'NONE',  ( -0.7071067811865473500, -0.7071067811865476800, 0.0000000000000000000 ) ) ;
+#380 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#381 = EDGE_LOOP ( 'NONE', ( #31, #310, #592, #237 ) ) ;
+#382 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#383 = DIRECTION ( 'NONE',  ( 0.7071067811865472400, -0.7071067811865479100, 0.0000000000000000000 ) ) ;
+#384 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #405 ), #376 ) ;
+#385 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.0000000000000000000 ) ) ;
+#386 = LINE ( 'NONE', #206, #503 ) ;
+#387 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #198 ) ;
+#388 = CIRCLE ( 'NONE', #280, 0.1574803149606299200 ) ;
+#389 = DIRECTION ( 'NONE',  ( 0.7071067811865479100, -0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#390 = ORIENTED_EDGE ( 'NONE', *, *, #527, .F. ) ;
+#391 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #405 ) ) ;
+#392 = EDGE_LOOP ( 'NONE', ( #279, #506, #178, #29, #654 ) ) ;
+#393 = EDGE_LOOP ( 'NONE', ( #612, #609, #360, #635 ) ) ;
+#394 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.2952755905511810800 ) ) ;
+#395 = AXIS2_PLACEMENT_3D ( 'NONE', #486, #550, #187 ) ;
+#396 = AXIS2_PLACEMENT_3D ( 'NONE', #365, #36, #427 ) ;
+#397 = FACE_OUTER_BOUND ( 'NONE', #325, .T. ) ;
+#398 = CARTESIAN_POINT ( 'NONE',  ( 0.07975271893954888300, 0.05817683113626340200, 0.007812465511828990900 ) ) ;
+#399 = FACE_OUTER_BOUND ( 'NONE', #381, .T. ) ;
+#400 = AXIS2_PLACEMENT_3D ( 'NONE', #591, #243, #302 ) ;
+#401 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#402 = CARTESIAN_POINT ( 'NONE',  ( -0.03823098818931393300, -0.09100964285341187100, 0.005394852294172069800 ) ) ;
+#403 = VECTOR ( 'NONE', #651, 39.37007874015748100 ) ;
+#404 = AXIS2_PLACEMENT_3D ( 'NONE', #230, #139, #545 ) ;
+#405 = STYLED_ITEM ( 'NONE', ( #333 ), #284 ) ;
+#406 = ORIENTED_EDGE ( 'NONE', *, *, #549, .F. ) ;
+#407 = VERTEX_POINT ( 'NONE', #601 ) ;
+#408 = AXIS2_PLACEMENT_3D ( 'NONE', #628, #672, #350 ) ;
+#409 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #32, #74 ) ;
+#410 = EDGE_LOOP ( 'NONE', ( #478, #406, #160, #668, #508 ) ) ;
+#411 = AXIS2_PLACEMENT_3D ( 'NONE', #56, #110, #190 ) ;
+#412 = ADVANCED_FACE ( 'NONE', ( #529 ), #208, .T. ) ;
+#413 = VERTEX_POINT ( 'NONE', #194 ) ;
+#414 = CARTESIAN_POINT ( 'NONE',  ( 0.01391942482650646700, 0.09743597378554771900, 0.008217013878821963600 ) ) ;
+#415 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #158, #295 ) ;
+#416 = ORIENTED_EDGE ( 'NONE', *, *, #512, .T. ) ;
+#417 = ADVANCED_FACE ( 'NONE', ( #639 ), #626, .T. ) ;
+#418 = TOROIDAL_SURFACE ( 'NONE', #320, 0.05905511811023622700, 0.09842519685039370600 ) ;
+#419 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.2559055118110236700 ) ) ;
+#420 = VERTEX_POINT ( 'NONE', #150 ) ;
+#421 = CARTESIAN_POINT ( 'NONE',  ( -0.1113553986120546900, -0.1113553986120545500, 0.2559055118110235600 ) ) ;
+#422 = EDGE_CURVE ( 'NONE', #238, #145, #62, .T. ) ;
+#423 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 1.224646799147353500E-016, 0.0000000000000000000 ) ) ;
+#424 = VERTEX_POINT ( 'NONE', #605 ) ;
+#425 = CARTESIAN_POINT ( 'NONE',  ( -0.002020603696519547500, 0.08149594526252164400, 0.0003462945201201051600 ) ) ;
+#426 = EDGE_CURVE ( 'NONE', #424, #128, #191, .T. ) ;
+#427 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#428 = EDGE_CURVE ( 'NONE', #145, #424, #347, .T. ) ;
+#429 = CARTESIAN_POINT ( 'NONE',  ( 0.3964987327506092100, -0.2783884965301368100, 0.2559055118110235600 ) ) ;
+#430 = ORIENTED_EDGE ( 'NONE', *, *, #467, .F. ) ;
+#431 = SURFACE_STYLE_USAGE ( .BOTH. , #47 ) ;
+#432 = CARTESIAN_POINT ( 'NONE',  ( 0.3201467710096573800, -0.2366302220506162600, 0.0000000000000000000 ) ) ;
+#433 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#434 = EDGE_CURVE ( 'NONE', #420, #238, #329, .T. ) ;
+#435 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#436 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#437 = VECTOR ( 'NONE', #196, 39.37007874015748900 ) ;
+#438 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.2559055118110236700 ) ) ;
+#439 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#440 = EDGE_CURVE ( 'NONE', #413, #420, #514, .T. ) ;
+#441 = EDGE_CURVE ( 'NONE', #128, #420, #50, .T. ) ;
+#442 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -1.734723475976807500E-015, 0.0000000000000000000 ) ) ;
+#443 = VERTEX_POINT ( 'NONE', #185 ) ;
+#444 = EDGE_CURVE ( 'NONE', #54, #128, #615, .T. ) ;
+#445 = EDGE_CURVE ( 'NONE', #223, #413, #470, .T. ) ;
+#446 = VERTEX_POINT ( 'NONE', #432 ) ;
+#447 = DIRECTION ( 'NONE',  ( -0.7071067811865479100, 0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#448 = FACE_OUTER_BOUND ( 'NONE', #392, .T. ) ;
+#449 = CARTESIAN_POINT ( 'NONE',  ( -0.1113553986120546800, -0.1113553986120545800, 0.2559055118110235600 ) ) ;
+#450 = EDGE_CURVE ( 'NONE', #85, #484, #315, .T. ) ;
+#451 = ORIENTED_EDGE ( 'NONE', *, *, #561, .F. ) ;
+#452 = CARTESIAN_POINT ( 'NONE',  ( 0.09098777317064635200, 0.03828310753046525900, 0.005402420817174374000 ) ) ;
+#453 = EDGE_CURVE ( 'NONE', #303, #54, #599, .T. ) ;
+#454 = EDGE_CURVE ( 'NONE', #298, #443, #455, .T. ) ;
+#455 = CIRCLE ( 'NONE', #335, 0.09842519685039344300 ) ;
+#456 = VERTEX_POINT ( 'NONE', #6 ) ;
+#457 = PLANE ( 'NONE',  #285 ) ;
+#458 = CARTESIAN_POINT ( 'NONE',  ( -0.05816105505110303500, -0.07976889794815190900, 0.007812215868576118100 ) ) ;
+#459 = EDGE_CURVE ( 'NONE', #443, #298, #583, .T. ) ;
+#460 = EDGE_CURVE ( 'NONE', #580, #244, #149, .T. ) ;
+#461 = DIRECTION ( 'NONE',  ( -0.7071067811865472400, 0.7071067811865477900, 1.880790961315660500E-031 ) ) ;
+#462 = ORIENTED_EDGE ( 'NONE', *, *, #487, .T. ) ;
+#463 = EDGE_CURVE ( 'NONE', #572, #456, #25, .T. ) ;
+#464 = TOROIDAL_SURFACE ( 'NONE', #251, 0.1181102362204724500, 0.03937007874015748000 ) ;
+#465 = ORIENTED_EDGE ( 'NONE', *, *, #487, .F. ) ;
+#466 = VERTEX_POINT ( 'NONE', #646 ) ;
+#467 = EDGE_CURVE ( 'NONE', #115, #547, #274, .T. ) ;
+#468 = EDGE_CURVE ( 'NONE', #446, #113, #12, .T. ) ;
+#469 = CARTESIAN_POINT ( 'NONE',  ( -0.1113553986120546900, -0.1113553986120545500, 0.09842519685039379000 ) ) ;
+#470 = LINE ( 'NONE', #309, #35 ) ;
+#471 = ADVANCED_FACE ( 'NONE', ( #131 ), #418, .T. ) ;
+#472 = EDGE_CURVE ( 'NONE', #58, #115, #117, .T. ) ;
+#473 = DIRECTION ( 'NONE',  ( 0.7071067811865472400, -0.7071067811865479100, -7.359808400080197800E-016 ) ) ;
+#474 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#475 = EDGE_CURVE ( 'NONE', #456, #577, #258, .T. ) ;
+#476 = EDGE_CURVE ( 'NONE', #244, #407, #558, .T. ) ;
+#477 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#478 = ORIENTED_EDGE ( 'NONE', *, *, #482, .T. ) ;
+#479 = CARTESIAN_POINT ( 'NONE',  ( 0.3374436146403729800, -0.2783884965301368100, 0.09842519685039365100 ) ) ;
+#480 = EDGE_CURVE ( 'NONE', #223, #46, #573, .T. ) ;
+#481 = CIRCLE ( 'NONE', #260, 0.1574803149606299200 ) ;
+#482 = EDGE_CURVE ( 'NONE', #145, #244, #233, .T. ) ;
+#483 = CARTESIAN_POINT ( 'NONE',  ( 0.08351654895904092600, 0.08351654895904099500, 0.2952755905511810800 ) ) ;
+#484 = VERTEX_POINT ( 'NONE', #15 ) ;
+#485 = DIRECTION ( 'NONE',  ( 0.7071067811865477900, 0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#486 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.2559055118110236700 ) ) ;
+#487 = EDGE_CURVE ( 'NONE', #407, #413, #663, .T. ) ;
+#488 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#489 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#490 =( CONVERSION_BASED_UNIT ( 'INCH', #266 ) LENGTH_UNIT ( ) NAMED_UNIT ( #474 ) );
+#491 = VECTOR ( 'NONE', #259, 39.37007874015748100 ) ;
+#492 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#493 = EDGE_CURVE ( 'NONE', #577, #100, #537, .T. ) ;
+#494 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.09842519685039365100 ) ) ;
+#495 = EDGE_CURVE ( 'NONE', #46, #580, #218, .T. ) ;
+#496 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#497 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #557 ) ;
+#498 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#499 = EDGE_CURVE ( 'NONE', #46, #407, #79, .T. ) ;
+#500 = PRODUCT_CONTEXT ( 'NONE', #557, 'mechanical' ) ;
+#501 = EDGE_CURVE ( 'NONE', #54, #572, #523, .T. ) ;
+#502 = ORIENTED_EDGE ( 'NONE', *, *, #522, .F. ) ;
+#503 = VECTOR ( 'NONE', #159, 39.37007874015748100 ) ;
+#504 = CIRCLE ( 'NONE', #268, 0.09842519685039370600 ) ;
+#505 = EDGE_CURVE ( 'NONE', #100, #303, #386, .T. ) ;
+#506 = ORIENTED_EDGE ( 'NONE', *, *, #551, .T. ) ;
+#507 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#508 = ORIENTED_EDGE ( 'NONE', *, *, #428, .F. ) ;
+#509 = ORIENTED_EDGE ( 'NONE', *, *, #556, .T. ) ;
+#510 = DIRECTION ( 'NONE',  ( -0.7071067811865472400, 0.7071067811865479100, 0.0000000000000000000 ) ) ;
+#511 = EDGE_CURVE ( 'NONE', #369, #526, #136, .T. ) ;
+#512 = EDGE_CURVE ( 'NONE', #446, #46, #201, .T. ) ;
+#513 = CARTESIAN_POINT ( 'NONE',  ( 0.3201467710096573800, -0.2366302220506162600, 0.09842519685039370600 ) ) ;
+#514 = CIRCLE ( 'NONE', #346, 0.03937007874015748000 ) ;
+#515 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #647 );
+#516 = CARTESIAN_POINT ( 'NONE',  ( 0.09733027784165906900, 0.01650497598873848900, 0.002235797152481702000 ) ) ;
+#517 = EDGE_CURVE ( 'NONE', #100, #466, #179, .T. ) ;
+#518 = TOROIDAL_SURFACE ( 'NONE', #395, 0.1181102362204724500, 0.03937007874015748000 ) ;
+#519 = ORIENTED_EDGE ( 'NONE', *, *, #444, .T. ) ;
+#520 = CARTESIAN_POINT ( 'NONE',  ( -0.06959712413253406300, -0.06959712413253398000, 0.008217013878822003500 ) ) ;
+#521 = EDGE_CURVE ( 'NONE', #484, #547, #135, .T. ) ;
+#522 = EDGE_CURVE ( 'NONE', #443, #85, #339, .T. ) ;
+#523 = LINE ( 'NONE', #449, #67 ) ;
+#524 = CIRCLE ( 'NONE', #281, 0.09842519685039369200 ) ;
+#525 = EDGE_CURVE ( 'NONE', #298, #369, #55, .T. ) ;
+#526 = VERTEX_POINT ( 'NONE', #209 ) ;
+#527 = EDGE_CURVE ( 'NONE', #466, #369, #665, .T. ) ;
+#528 = EDGE_CURVE ( 'NONE', #115, #466, #119, .T. ) ;
+#529 = FACE_OUTER_BOUND ( 'NONE', #563, .T. ) ;
+#530 = ADVANCED_FACE ( 'NONE', ( #621 ), #457, .F. ) ;
+#531 = CARTESIAN_POINT ( 'NONE',  ( 0.3374436146403729800, -0.2783884965301368100, 0.0000000000000000000 ) ) ;
+#532 = CYLINDRICAL_SURFACE ( 'NONE', #415, 0.09842519685039344300 ) ;
+#533 = EDGE_CURVE ( 'NONE', #572, #424, #219, .T. ) ;
+#534 = EDGE_CURVE ( 'NONE', #547, #446, #81, .T. ) ;
+#535 = CARTESIAN_POINT ( 'NONE',  ( 0.09743597378554765000, -0.01391942482650673300, 0.0000000000000000000 ) ) ;
+#536 = EDGE_CURVE ( 'NONE', #100, #572, #539, .T. ) ;
+#537 = CIRCLE ( 'NONE', #304, 0.1574803149606299200 ) ;
+#538 = EDGE_CURVE ( 'NONE', #303, #58, #524, .T. ) ;
+#539 = LINE ( 'NONE', #167, #357 ) ;
+#540 = ORIENTED_EDGE ( 'NONE', *, *, #422, .F. ) ;
+#541 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#542 = ORIENTED_EDGE ( 'NONE', *, *, #543, .T. ) ;
+#543 = EDGE_CURVE ( 'NONE', #303, #223, #388, .T. ) ;
+#544 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.09842519685039372000 ) ) ;
+#545 = DIRECTION ( 'NONE',  ( 0.7071067811865472400, -0.7071067811865479100, 0.0000000000000000000 ) ) ;
+#546 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#547 = VERTEX_POINT ( 'NONE', #535 ) ;
+#548 = PLANE ( 'NONE',  #245 ) ;
+#549 = EDGE_CURVE ( 'NONE', #456, #244, #202, .T. ) ;
+#550 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#551 = EDGE_CURVE ( 'NONE', #113, #58, #69, .T. ) ;
+#552 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#553 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#554 = ORIENTED_EDGE ( 'NONE', *, *, #426, .T. ) ;
+#555 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#556 = EDGE_CURVE ( 'NONE', #238, #407, #633, .T. ) ;
+#557 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#558 = LINE ( 'NONE', #319, #105 ) ;
+#559 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #152 ) ;
+#560 = EDGE_CURVE ( 'NONE', #113, #223, #504, .T. ) ;
+#561 = EDGE_CURVE ( 'NONE', #484, #580, #180, .T. ) ;
+#562 = ORIENTED_EDGE ( 'NONE', *, *, #434, .T. ) ;
+#563 = EDGE_LOOP ( 'NONE', ( #344, #171, #390, #222, #596 ) ) ;
+#564 = ORIENTED_EDGE ( 'NONE', *, *, #522, .T. ) ;
+#565 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#566 = EDGE_CURVE ( 'NONE', #526, #577, #341, .T. ) ;
+#567 = ORIENTED_EDGE ( 'NONE', *, *, #534, .F. ) ;
+#568 = DIRECTION ( 'NONE',  ( 0.7071067811865471300, 0.7071067811865477900, 0.0000000000000000000 ) ) ;
+#569 = ORIENTED_EDGE ( 'NONE', *, *, #501, .F. ) ;
+#570 = CARTESIAN_POINT ( 'NONE',  ( 0.09852751979563070800, -0.006278602755925230700, -4.892115486701018300E-017 ) ) ;
+#571 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.008217013878822006900 ) ) ;
+#572 = VERTEX_POINT ( 'NONE', #421 ) ;
+#573 = CIRCLE ( 'NONE', #322, 0.1574803149606299200 ) ;
+#574 = EDGE_CURVE ( 'NONE', #580, #577, #481, .T. ) ;
+#575 = ORIENTED_EDGE ( 'NONE', *, *, #445, .T. ) ;
+#576 = ORIENTED_EDGE ( 'NONE', *, *, #495, .T. ) ;
+#577 = VERTEX_POINT ( 'NONE', #337 ) ;
+#578 = CYLINDRICAL_SURFACE ( 'NONE', #220, 0.1574803149606299200 ) ;
+#579 = EDGE_CURVE ( 'NONE', #526, #85, #86, .T. ) ;
+#580 = VERTEX_POINT ( 'NONE', #82 ) ;
+#581 = ADVANCED_FACE ( 'NONE', ( #169, #40 ), #548, .T. ) ;
+#582 = CARTESIAN_POINT ( 'NONE',  ( 0.1948719475710957700, -0.3619050454891779000, 0.2952755905511810800 ) ) ;
+#583 = LINE ( 'NONE', #314, #437 ) ;
+#584 = ADVANCED_FACE ( 'NONE', ( #57 ), #299, .T. ) ;
+#585 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.09842519685039365100 ) ) ;
+#586 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#587 = CARTESIAN_POINT ( 'NONE',  ( 0.04175827447952039400, 0.04175827447952046300, 0.09842519685039365100 ) ) ;
+#588 = ORIENTED_EDGE ( 'NONE', *, *, #619, .T. ) ;
+#589 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#590 = CYLINDRICAL_SURFACE ( 'NONE', #232, 0.1574803149606299200 ) ;
+#591 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.2559055118110235600 ) ) ;
+#592 = ORIENTED_EDGE ( 'NONE', *, *, #441, .F. ) ;
+#593 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#594 = FILL_AREA_STYLE_COLOUR ( '', #176 ) ;
+#595 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#596 = ORIENTED_EDGE ( 'NONE', *, *, #493, .F. ) ;
+#597 = DIRECTION ( 'NONE',  ( -0.7071067811865472400, -0.7071067811865477900, 0.0000000000000000000 ) ) ;
+#598 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.008217013878821954900 ) ) ;
+#599 = LINE ( 'NONE', #144, #291 ) ;
+#600 = ORIENTED_EDGE ( 'NONE', *, *, #511, .T. ) ;
+#601 = CARTESIAN_POINT ( 'NONE',  ( 0.3897438951421915400, -0.1670330979180820500, 0.2559055118110235600 ) ) ;
+#602 = ORIENTED_EDGE ( 'NONE', *, *, #521, .F. ) ;
+#603 = CARTESIAN_POINT ( 'NONE',  ( 0.1113553986120545800, 0.1113553986120547100, -0.7738918995863138800 ) ) ;
+#604 = SURFACE_SIDE_STYLE ('',( #94 ) ) ;
+#605 = CARTESIAN_POINT ( 'NONE',  ( -0.08351654895904100900, -0.08351654895904091200, 0.2952755905511810800 ) ) ;
+#606 = ORIENTED_EDGE ( 'NONE', *, *, #459, .T. ) ;
+#607 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.0000000000000000000 ) ) ;
+#608 = DIRECTION ( 'NONE',  ( -0.7071067811865472400, 0.7071067811865479100, 0.0000000000000000000 ) ) ;
+#609 = ORIENTED_EDGE ( 'NONE', *, *, #505, .T. ) ;
+#610 = FACE_OUTER_BOUND ( 'NONE', #2, .T. ) ;
+#611 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.414809992080329000E-017, 0.09842519685039372000 ) ) ;
+#612 = ORIENTED_EDGE ( 'NONE', *, *, #536, .F. ) ;
+#613 = CARTESIAN_POINT ( 'NONE',  ( -0.09743597378554765000, -0.01391942482650680500, 0.008217013878821989600 ) ) ;
+#614 = ORIENTED_EDGE ( 'NONE', *, *, #536, .T. ) ;
+#615 = CIRCLE ( 'NONE', #340, 0.03937007874015748700 ) ;
+#616 = SHAPE_DEFINITION_REPRESENTATION ( #387, #41 ) ;
+#617 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -1.776356839400250500E-015, 0.0000000000000000000 ) ) ;
+#618 = DIRECTION ( 'NONE',  ( 0.7071067811865479100, -0.7071067811865472400, 0.0000000000000000000 ) ) ;
+#619 = EDGE_CURVE ( 'NONE', #413, #54, #324, .T. ) ;
+#620 = ORIENTED_EDGE ( 'NONE', *, *, #556, .F. ) ;
+#621 = FACE_OUTER_BOUND ( 'NONE', #371, .T. ) ;
+#622 = FACE_OUTER_BOUND ( 'NONE', #278, .T. ) ;
+#623 = ORIENTED_EDGE ( 'NONE', *, *, #441, .T. ) ;
+#624 = ORIENTED_EDGE ( 'NONE', *, *, #527, .T. ) ;
+#625 = ADVANCED_FACE ( 'NONE', ( #622 ), #590, .T. ) ;
+#626 = CYLINDRICAL_SURFACE ( 'NONE', #349, 0.09842519685039370600 ) ;
+#627 = EDGE_LOOP ( 'NONE', ( #72, #377 ) ) ;
+#628 = CARTESIAN_POINT ( 'NONE',  ( -0.04175827447952051900, 0.04175827447952051900, 0.2952755905511810800 ) ) ;
+#629 = ADVANCED_FACE ( 'NONE', ( #610 ), #464, .T. ) ;
+#630 = SURFACE_STYLE_FILL_AREA ( #368 ) ;
+#631 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#632 = VECTOR ( 'NONE', #661, 39.37007874015748100 ) ;
+#633 = CIRCLE ( 'NONE', #272, 0.03937007874015748700 ) ;
+#634 = DIRECTION ( 'NONE',  ( -0.7071067811865473500, -0.7071067811865476800, 8.673617379884035500E-016 ) ) ;
+#635 = ORIENTED_EDGE ( 'NONE', *, *, #501, .T. ) ;
+#636 = CARTESIAN_POINT ( 'NONE',  ( -0.07551459866876543400, 0.008001950290275498800, 0.001034995007074011200 ) ) ;
+#637 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#638 = CARTESIAN_POINT ( 'NONE',  ( 0.1113553986120545800, 0.1113553986120547100, 0.2559055118110235600 ) ) ;
+#639 = FACE_OUTER_BOUND ( 'NONE', #181, .T. ) ;
+#640 = CARTESIAN_POINT ( 'NONE',  ( 0.2783884965301368100, -0.2783884965301368100, 0.2559055118110235600 ) ) ;
+#641 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#642 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 8.881784197001252300E-016, 0.0000000000000000000 ) ) ;
+#643 = CYLINDRICAL_SURFACE ( 'NONE', #409, 0.1574803149606299200 ) ;
+#644 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#645 = CARTESIAN_POINT ( 'NONE',  ( 0.08351654895904091200, 0.08351654895904100900, 0.2952755905511810800 ) ) ;
+#646 = CARTESIAN_POINT ( 'NONE',  ( -0.06959712413253406300, -0.06959712413253398000, 0.008217013878822003500 ) ) ;
+#647 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#648 = CARTESIAN_POINT ( 'NONE',  ( -0.08351654895904100900, -0.08351654895904091200, 0.2952755905511810800 ) ) ;
+#649 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#650 = VECTOR ( 'NONE', #447, 39.37007874015748100 ) ;
+#651 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#652 = VECTOR ( 'NONE', #277, 39.37007874015748100 ) ;
+#653 = CARTESIAN_POINT ( 'NONE',  ( 0.08351654895904092600, 0.08351654895904099500, 0.2559055118110236700 ) ) ;
+#654 = ORIENTED_EDGE ( 'NONE', *, *, #534, .T. ) ;
+#655 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#656 = FACE_OUTER_BOUND ( 'NONE', #109, .T. ) ;
+#657 = PRESENTATION_STYLE_ASSIGNMENT (( #257 ) ) ;
+#658 = ORIENTED_EDGE ( 'NONE', *, *, #480, .T. ) ;
+#659 = DIRECTION ( 'NONE',  ( 0.7071067811865472400, -0.7071067811865477900, 0.0000000000000000000 ) ) ;
+#660 = FACE_OUTER_BOUND ( 'NONE', #667, .T. ) ;
+#661 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#662 = CARTESIAN_POINT ( 'NONE',  ( -0.001305045124956335100, -0.09870740754239708300, 0.0005697965634148986300 ) ) ;
+#663 = CIRCLE ( 'NONE', #313, 0.1574803149606299200 ) ;
+#664 = CARTESIAN_POINT ( 'NONE',  ( 0.04175827447952040100, 0.04175827447952047000, 0.0000000000000000000 ) ) ;
+#665 = CIRCLE ( 'NONE', #294, 0.09842519685039344300 ) ;
+#666 = ORIENTED_EDGE ( 'NONE', *, *, #460, .T. ) ;
+#667 = EDGE_LOOP ( 'NONE', ( #292, #140, #24, #614 ) ) ;
+#668 = ORIENTED_EDGE ( 'NONE', *, *, #533, .T. ) ;
+#669 = ADVANCED_FACE ( 'NONE', ( #448 ), #49, .F. ) ;
+#670 = EDGE_LOOP ( 'NONE', ( #361, #14, #205, #170 ) ) ;
+#671 = ADVANCED_FACE ( 'NONE', ( #157 ), #578, .T. ) ;
+#672 = DIRECTION ( 'NONE',  ( 0.7071067811865489100, -0.7071067811865462400, 0.0000000000000000000 ) ) ;
+#673 = EDGE_LOOP ( 'NONE', ( #138, #600, #270, #502, #606 ) ) ;
+#674 = VECTOR ( 'NONE', #608, 39.37007874015748100 ) ;
+#675 = CARTESIAN_POINT ( 'NONE',  ( 0.3897438951421915400, -0.1670330979180820500, 0.09842519685039365100 ) ) ;
+#676 = ORIENTED_EDGE ( 'NONE', *, *, #440, .F. ) ;
+#677 = ORIENTED_EDGE ( 'NONE', *, *, #574, .F. ) ;
+#678 = CARTESIAN_POINT ( 'NONE',  ( 0.3619050454891778500, -0.1948719475710957400, 0.2559055118110236700 ) ) ;
+#679 = DIRECTION ( 'NONE',  ( 0.7071067811865472400, -0.7071067811865477900, 0.0000000000000000000 ) ) ;
+#680 = ORIENTED_EDGE ( 'NONE', *, *, #549, .T. ) ;
+#681 = CARTESIAN_POINT ( 'NONE',  ( -0.05096845712785944000, 0.03254809183118154800, -9.929051066323613700E-005 ) ) ;
+#682 = CARTESIAN_POINT ( 'NONE',  ( 0.4358688114907667300, -0.2783884965301368100, 0.09842519685039365100 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Takedown_Pin.step

@@ -0,0 +1,298 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Takedown_Pin.step',
+    '2014-05-14T06:09:13',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = ORIENTED_EDGE ( 'NONE', *, *, #53, .T. ) ;
+#2 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#3 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#4 = EDGE_CURVE ( 'NONE', #211, #131, #5, .T. ) ;
+#5 = CIRCLE ( 'NONE', #271, 0.1771653543307087100 ) ;
+#6 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#7 = EDGE_LOOP ( 'NONE', ( #15, #80, #150, #168 ) ) ;
+#8 = EDGE_LOOP ( 'NONE', ( #226, #93, #13, #38 ) ) ;
+#9 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#10 = CARTESIAN_POINT ( 'NONE',  ( 0.1743700787401577200, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#11 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#12 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#13 = ORIENTED_EDGE ( 'NONE', *, *, #276, .T. ) ;
+#14 = EDGE_CURVE ( 'NONE', #110, #219, #72, .T. ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #4, .F. ) ;
+#16 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#17 = CIRCLE ( 'NONE', #262, 0.1349999999999999800 ) ;
+#18 = ORIENTED_EDGE ( 'NONE', *, *, #4, .T. ) ;
+#19 = PLANE ( 'NONE',  #227 ) ;
+#20 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#21 = VERTEX_POINT ( 'NONE', #195 ) ;
+#22 = EDGE_CURVE ( 'NONE', #219, #268, #55, .T. ) ;
+#23 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#24 = CONICAL_SURFACE ( 'NONE', #228, 0.1743700787401577200, 0.7853981633974579400 ) ;
+#25 = VERTEX_POINT ( 'NONE', #191 ) ;
+#26 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #146, 'distance_accuracy_value', 'NONE');
+#27 = CIRCLE ( 'NONE', #263, 0.1771653543307087100 ) ;
+#28 = FACE_OUTER_BOUND ( 'NONE', #8, .T. ) ;
+#29 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#30 = FACE_OUTER_BOUND ( 'NONE', #229, .T. ) ;
+#31 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#32 = EDGE_CURVE ( 'NONE', #21, #268, #242, .T. ) ;
+#33 = CARTESIAN_POINT ( 'NONE',  ( 0.1349999999999999800, 1.653273178848926900E-017, 1.425196850393701600 ) ) ;
+#34 = FACE_OUTER_BOUND ( 'NONE', #280, .T. ) ;
+#35 = SURFACE_STYLE_USAGE ( .BOTH. , #157 ) ;
+#36 = EDGE_CURVE ( 'NONE', #21, #25, #142, .T. ) ;
+#37 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.523622047244094700 ) ) ;
+#38 = ORIENTED_EDGE ( 'NONE', *, *, #69, .F. ) ;
+#39 = EDGE_LOOP ( 'NONE', ( #254, #221 ) ) ;
+#40 = EDGE_CURVE ( 'NONE', #211, #87, #101, .T. ) ;
+#41 = EDGE_CURVE ( 'NONE', #110, #21, #200, .T. ) ;
+#42 = CARTESIAN_POINT ( 'NONE',  ( 0.1349999999999999800, 1.653273178848926900E-017, 0.0000000000000000000 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #32, .F. ) ;
+#44 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#45 = VECTOR ( 'NONE', #152, 39.37007874015748900 ) ;
+#46 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #253 );
+#47 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#48 = PRESENTATION_STYLE_ASSIGNMENT (( #35 ) ) ;
+#49 = EDGE_CURVE ( 'NONE', #268, #219, #193, .T. ) ;
+#50 = CLOSED_SHELL ( 'NONE', ( #161, #174, #154, #52, #245, #179, #218, #241, #62 ) ) ;
+#51 = CARTESIAN_POINT ( 'NONE',  ( -0.1349999999999999800, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#52 = ADVANCED_FACE ( 'NONE', ( #34 ), #192, .T. ) ;
+#53 = EDGE_CURVE ( 'NONE', #21, #110, #17, .T. ) ;
+#54 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#55 = CIRCLE ( 'NONE', #270, 0.1349999999999999800 ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.523622047244094700 ) ) ;
+#57 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#58 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #109 ), #178 ) ;
+#59 =( CONVERSION_BASED_UNIT ( 'INCH', #96 ) LENGTH_UNIT ( ) NAMED_UNIT ( #159 ) );
+#60 = VERTEX_POINT ( 'NONE', #137 ) ;
+#61 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#62 = ADVANCED_FACE ( 'NONE', ( #136 ), #234, .T. ) ;
+#63 = VECTOR ( 'NONE', #29, 39.37007874015748100 ) ;
+#64 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#65 = EDGE_CURVE ( 'NONE', #131, #211, #27, .T. ) ;
+#66 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#67 = CARTESIAN_POINT ( 'NONE',  ( 0.1743700787401577200, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#68 = ORIENTED_EDGE ( 'NONE', *, *, #276, .F. ) ;
+#69 = EDGE_CURVE ( 'NONE', #25, #83, #224, .T. ) ;
+#70 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#71 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#72 = LINE ( 'NONE', #115, #63 ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#74 = ORIENTED_EDGE ( 'NONE', *, *, #278, .T. ) ;
+#75 = EDGE_CURVE ( 'NONE', #87, #60, #151, .T. ) ;
+#76 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #235 ) ;
+#77 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #59, 'distance_accuracy_value', 'NONE');
+#78 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#79 = FILL_AREA_STYLE_COLOUR ( '', #114 ) ;
+#80 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ;
+#81 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#82 = CIRCLE ( 'NONE', #216, 0.1771653543307087100 ) ;
+#83 = VERTEX_POINT ( 'NONE', #10 ) ;
+#84 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #109 ) ) ;
+#85 = FACE_OUTER_BOUND ( 'NONE', #111, .T. ) ;
+#86 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#87 = VERTEX_POINT ( 'NONE', #97 ) ;
+#88 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#89 = CONICAL_SURFACE ( 'NONE', #240, 0.1743700787401577200, 0.7853981633974579400 ) ;
+#90 = FILL_AREA_STYLE ('',( #164 ) ) ;
+#91 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#92 = SHAPE_DEFINITION_REPRESENTATION ( #76, #172 ) ;
+#93 = ORIENTED_EDGE ( 'NONE', *, *, #41, .F. ) ;
+#94 = FACE_OUTER_BOUND ( 'NONE', #7, .T. ) ;
+#95 = DIRECTION ( 'NONE',  ( 1.224646799147353200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#96 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #176 );
+#97 = CARTESIAN_POINT ( 'NONE',  ( -0.1771653543307087100, 2.169649841009091000E-017, 1.582677165354331200 ) ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.582677165354331200 ) ) ;
+#99 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#100 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
+#101 = CIRCLE ( 'NONE', #267, 0.05905511811023624000 ) ;
+#102 = EDGE_LOOP ( 'NONE', ( #165, #118, #74, #100 ) ) ;
+#103 = CARTESIAN_POINT ( 'NONE',  ( -0.1349999999999999800, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#104 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#105 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.582677165354331200 ) ) ;
+#106 = ORIENTED_EDGE ( 'NONE', *, *, #275, .F. ) ;
+#107 = SURFACE_STYLE_USAGE ( .BOTH. , #223 ) ;
+#108 = PRESENTATION_STYLE_ASSIGNMENT (( #107 ) ) ;
+#109 = STYLED_ITEM ( 'NONE', ( #108 ), #172 ) ;
+#110 = VERTEX_POINT ( 'NONE', #33 ) ;
+#111 = EDGE_LOOP ( 'NONE', ( #147, #156, #106, #68 ) ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #49, .T. ) ;
+#113 = AXIS2_PLACEMENT_3D ( 'NONE', #273, #16, #281 ) ;
+#114 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#115 = CARTESIAN_POINT ( 'NONE',  ( 0.1349999999999999800, 1.653273178848926900E-017, 1.464566929133858600 ) ) ;
+#116 = ORIENTED_EDGE ( 'NONE', *, *, #275, .T. ) ;
+#117 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#118 = ORIENTED_EDGE ( 'NONE', *, *, #65, .F. ) ;
+#119 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#120 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #2 );
+#121 = MANIFOLD_SOLID_BREP ( 'Fillet1', #50 ) ;
+#122 = ORIENTED_EDGE ( 'NONE', *, *, #65, .T. ) ;
+#123 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( -0.1771653543307087100, 2.169649841009091000E-017, 1.464566929133858600 ) ) ;
+#125 = PLANE ( 'NONE',  #222 ) ;
+#126 = ORIENTED_EDGE ( 'NONE', *, *, #41, .T. ) ;
+#127 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#128 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#129 =( CONVERSION_BASED_UNIT ( 'INCH', #46 ) LENGTH_UNIT ( ) NAMED_UNIT ( #123 ) );
+#130 = SURFACE_STYLE_FILL_AREA ( #90 ) ;
+#131 = VERTEX_POINT ( 'NONE', #272 ) ;
+#132 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #71, 'design' ) ;
+#133 = CIRCLE ( 'NONE', #217, 0.05905511811023627500 ) ;
+#134 = ORIENTED_EDGE ( 'NONE', *, *, #22, .T. ) ;
+#135 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.425196850393701600 ) ) ;
+#136 = FACE_OUTER_BOUND ( 'NONE', #102, .T. ) ;
+#137 = CARTESIAN_POINT ( 'NONE',  ( 0.1771653543307087100, 0.0000000000000000000, 1.582677165354331200 ) ) ;
+#138 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#139 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#140 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#141 = CIRCLE ( 'NONE', #225, 0.1743700787401577200 ) ;
+#142 = LINE ( 'NONE', #266, #45 ) ;
+#143 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#144 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#145 = FACE_BOUND ( 'NONE', #182, .T. ) ;
+#146 =( CONVERSION_BASED_UNIT ( 'INCH', #120 ) LENGTH_UNIT ( ) NAMED_UNIT ( #64 ) );
+#147 = ORIENTED_EDGE ( 'NONE', *, *, #53, .F. ) ;
+#148 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#149 = CYLINDRICAL_SURFACE ( 'NONE', #239, 0.1349999999999999800 ) ;
+#150 = ORIENTED_EDGE ( 'NONE', *, *, #279, .F. ) ;
+#151 = CIRCLE ( 'NONE', #256, 0.1771653543307087100 ) ;
+#152 = DIRECTION ( 'NONE',  ( -0.7071067811865542300, 8.659560562355014200E-017, 0.7071067811865405800 ) ) ;
+#153 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#154 = ADVANCED_FACE ( 'NONE', ( #260 ), #149, .T. ) ;
+#155 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.425196850393701600 ) ) ;
+#156 = ORIENTED_EDGE ( 'NONE', *, *, #36, .T. ) ;
+#157 = SURFACE_SIDE_STYLE ('',( #277 ) ) ;
+#158 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#159 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
+#161 = ADVANCED_FACE ( 'NONE', ( #94 ), #207, .T. ) ;
+#162 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.582677165354331200 ) ) ;
+#163 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#164 = FILL_AREA_STYLE_COLOUR ( '', #158 ) ;
+#165 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ;
+#166 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#168 = ORIENTED_EDGE ( 'NONE', *, *, #278, .F. ) ;
+#169 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#170 = ORIENTED_EDGE ( 'NONE', *, *, #69, .T. ) ;
+#171 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#172 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Takedown_Pin', ( #121, #237 ), #215 ) ;
+#173 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#174 = ADVANCED_FACE ( 'NONE', ( #85 ), #89, .T. ) ;
+#175 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#176 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#177 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#178 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #214 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #129, #3, #148 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#179 = ADVANCED_FACE ( 'NONE', ( #30, #145 ), #244, .F. ) ;
+#180 = ORIENTED_EDGE ( 'NONE', *, *, #279, .T. ) ;
+#181 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#182 = EDGE_LOOP ( 'NONE', ( #116, #170 ) ) ;
+#183 = DIRECTION ( 'NONE',  ( 0.7071067811865542300, 0.0000000000000000000, 0.7071067811865405800 ) ) ;
+#184 = CARTESIAN_POINT ( 'NONE',  ( 0.1771653543307087100, 0.0000000000000000000, 1.523622047244094700 ) ) ;
+#185 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #205 ) ;
+#186 = PRODUCT ( 'Takedown_Pin', 'Takedown_Pin', '', ( #188 ) ) ;
+#187 = LINE ( 'NONE', #67, #252 ) ;
+#188 = PRODUCT_CONTEXT ( 'NONE', #205, 'mechanical' ) ;
+#189 = ORIENTED_EDGE ( 'NONE', *, *, #32, .T. ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( -0.1743700787401577200, 2.135417587962060800E-017, 1.464566929133858600 ) ) ;
+#192 = CYLINDRICAL_SURFACE ( 'NONE', #259, 0.1349999999999999800 ) ;
+#193 = CIRCLE ( 'NONE', #264, 0.1349999999999999800 ) ;
+#194 = FACE_OUTER_BOUND ( 'NONE', #208, .T. ) ;
+#195 = CARTESIAN_POINT ( 'NONE',  ( -0.1349999999999999800, 0.0000000000000000000, 1.425196850393701600 ) ) ;
+#196 = VECTOR ( 'NONE', #248, 39.37007874015748100 ) ;
+#197 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#198 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#199 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#200 = CIRCLE ( 'NONE', #265, 0.1349999999999999800 ) ;
+#201 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#202 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#203 = ORIENTED_EDGE ( 'NONE', *, *, #14, .T. ) ;
+#204 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#205 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#206 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #71 ) ;
+#207 = TOROIDAL_SURFACE ( 'NONE', #243, 0.1771653543307087100, 0.05905511811023622700 ) ;
+#208 = EDGE_LOOP ( 'NONE', ( #180, #160 ) ) ;
+#209 = CARTESIAN_POINT ( 'NONE',  ( -0.1771653543307087100, 2.169649841009091000E-017, 1.523622047244094700 ) ) ;
+#210 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#211 = VERTEX_POINT ( 'NONE', #124 ) ;
+#212 = FILL_AREA_STYLE ('',( #79 ) ) ;
+#213 = ORIENTED_EDGE ( 'NONE', *, *, #14, .F. ) ;
+#214 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #129, 'distance_accuracy_value', 'NONE');
+#215 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #26 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #146, #23, #166 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#216 = AXIS2_PLACEMENT_3D ( 'NONE', #105, #250, #128 ) ;
+#217 = AXIS2_PLACEMENT_3D ( 'NONE', #184, #70, #204 ) ;
+#218 = ADVANCED_FACE ( 'NONE', ( #194 ), #19, .T. ) ;
+#219 = VERTEX_POINT ( 'NONE', #42 ) ;
+#220 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #22, .F. ) ;
+#222 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #20, #163 ) ;
+#223 = SURFACE_SIDE_STYLE ('',( #130 ) ) ;
+#224 = CIRCLE ( 'NONE', #257, 0.1743700787401577200 ) ;
+#225 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #249, #127 ) ;
+#226 = ORIENTED_EDGE ( 'NONE', *, *, #36, .F. ) ;
+#227 = AXIS2_PLACEMENT_3D ( 'NONE', #162, #181, #261 ) ;
+#228 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #86, #220 ) ;
+#229 = EDGE_LOOP ( 'NONE', ( #122, #18 ) ) ;
+#230 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 1.224646799147352700E-016, 0.0000000000000000000 ) ) ;
+#231 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #186 ) ) ;
+#232 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #186, .NOT_KNOWN. ) ;
+#233 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#234 = TOROIDAL_SURFACE ( 'NONE', #258, 0.1771653543307087100, 0.05905511811023622700 ) ;
+#235 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #232, #132 ) ;
+#236 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#237 = AXIS2_PLACEMENT_3D ( 'NONE', #144, #167, #44 ) ;
+#238 = FACE_OUTER_BOUND ( 'NONE', #39, .T. ) ;
+#239 = AXIS2_PLACEMENT_3D ( 'NONE', #99, #139, #119 ) ;
+#240 = AXIS2_PLACEMENT_3D ( 'NONE', #202, #177, #61 ) ;
+#241 = ADVANCED_FACE ( 'NONE', ( #28 ), #24, .T. ) ;
+#242 = LINE ( 'NONE', #51, #196 ) ;
+#243 = AXIS2_PLACEMENT_3D ( 'NONE', #37, #140, #12 ) ;
+#244 = PLANE ( 'NONE',  #113 ) ;
+#245 = ADVANCED_FACE ( 'NONE', ( #238 ), #125, .F. ) ;
+#246 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #77 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #59, #201, #81 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#247 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #255 ), #246 ) ;
+#248 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#249 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#250 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#251 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #255 ) ) ;
+#252 = VECTOR ( 'NONE', #183, 39.37007874015748900 ) ;
+#253 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#254 = ORIENTED_EDGE ( 'NONE', *, *, #49, .F. ) ;
+#255 = STYLED_ITEM ( 'NONE', ( #48 ), #121 ) ;
+#256 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #236, #117 ) ;
+#257 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #57, #199 ) ;
+#258 = AXIS2_PLACEMENT_3D ( 'NONE', #56, #233, #198 ) ;
+#259 = AXIS2_PLACEMENT_3D ( 'NONE', #171, #169, #210 ) ;
+#260 = FACE_OUTER_BOUND ( 'NONE', #274, .T. ) ;
+#261 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#262 = AXIS2_PLACEMENT_3D ( 'NONE', #155, #31, #173 ) ;
+#263 = AXIS2_PLACEMENT_3D ( 'NONE', #269, #138, #11 ) ;
+#264 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #197, #78 ) ;
+#265 = AXIS2_PLACEMENT_3D ( 'NONE', #135, #9, #153 ) ;
+#266 = CARTESIAN_POINT ( 'NONE',  ( -0.1743700787401577200, 2.135417587962060800E-017, 1.464566929133858600 ) ) ;
+#267 = AXIS2_PLACEMENT_3D ( 'NONE', #209, #95, #230 ) ;
+#268 = VERTEX_POINT ( 'NONE', #103 ) ;
+#269 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#270 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #88, #6 ) ;
+#271 = AXIS2_PLACEMENT_3D ( 'NONE', #73, #91, #47 ) ;
+#272 = CARTESIAN_POINT ( 'NONE',  ( 0.1771653543307087100, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#273 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.464566929133858600 ) ) ;
+#274 = EDGE_LOOP ( 'NONE', ( #1, #203, #134, #43 ) ) ;
+#275 = EDGE_CURVE ( 'NONE', #83, #25, #141, .T. ) ;
+#276 = EDGE_CURVE ( 'NONE', #110, #83, #187, .T. ) ;
+#277 = SURFACE_STYLE_FILL_AREA ( #212 ) ;
+#278 = EDGE_CURVE ( 'NONE', #131, #60, #133, .T. ) ;
+#279 = EDGE_CURVE ( 'NONE', #60, #87, #82, .T. ) ;
+#280 = EDGE_LOOP ( 'NONE', ( #213, #126, #189, #112 ) ) ;
+#281 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Trigger_Carriage_Pin.step

@@ -0,0 +1,166 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trigger_Carriage_Pin.step',
+    '2014-05-14T06:09:52',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#2 = EDGE_CURVE ( 'NONE', #92, #12, #49, .T. ) ;
+#3 = FILL_AREA_STYLE_COLOUR ( '', #21 ) ;
+#4 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ;
+#5 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #80 ) ;
+#6 = CIRCLE ( 'NONE', #145, 0.1181102362204724700 ) ;
+#7 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#8 = VERTEX_POINT ( 'NONE', #74 ) ;
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #79, .F. ) ;
+#10 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#11 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#12 = VERTEX_POINT ( 'NONE', #70 ) ;
+#13 = VECTOR ( 'NONE', #43, 39.37007874015748100 ) ;
+#14 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#15 =( CONVERSION_BASED_UNIT ( 'INCH', #94 ) LENGTH_UNIT ( ) NAMED_UNIT ( #117 ) );
+#16 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Carriage_Pin', ( #93, #130 ), #143 ) ;
+#17 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #84 ), #131 ) ;
+#18 = FACE_OUTER_BOUND ( 'NONE', #58, .T. ) ;
+#19 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#20 = SURFACE_SIDE_STYLE ('',( #61 ) ) ;
+#21 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#22 = PLANE ( 'NONE',  #51 ) ;
+#23 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#24 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #29 );
+#25 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#26 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #84 ) ) ;
+#27 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#28 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#29 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#30 = VECTOR ( 'NONE', #33, 39.37007874015748100 ) ;
+#31 = CLOSED_SHELL ( 'NONE', ( #67, #110, #48, #75 ) ) ;
+#32 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724700, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#33 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#34 = LINE ( 'NONE', #149, #13 ) ;
+#35 = LINE ( 'NONE', #82, #30 ) ;
+#36 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #104, 'distance_accuracy_value', 'NONE');
+#37 = PLANE ( 'NONE',  #71 ) ;
+#38 = CIRCLE ( 'NONE', #133, 0.1181102362204724700 ) ;
+#39 = EDGE_LOOP ( 'NONE', ( #107, #116 ) ) ;
+#40 = CYLINDRICAL_SURFACE ( 'NONE', #56, 0.1181102362204724700 ) ;
+#41 = CYLINDRICAL_SURFACE ( 'NONE', #146, 0.1181102362204724700 ) ;
+#42 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#43 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#44 =( CONVERSION_BASED_UNIT ( 'INCH', #60 ) LENGTH_UNIT ( ) NAMED_UNIT ( #144 ) );
+#45 = FACE_OUTER_BOUND ( 'NONE', #39, .T. ) ;
+#46 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#47 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#48 = ADVANCED_FACE ( 'NONE', ( #18 ), #37, .T. ) ;
+#49 = CIRCLE ( 'NONE', #114, 0.1181102362204724700 ) ;
+#50 = CIRCLE ( 'NONE', #148, 0.1181102362204724700 ) ;
+#51 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #113, #47 ) ;
+#52 = SURFACE_STYLE_FILL_AREA ( #54 ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#54 = FILL_AREA_STYLE ('',( #128 ) ) ;
+#55 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#56 = AXIS2_PLACEMENT_3D ( 'NONE', #10, #23, #105 ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#58 = EDGE_LOOP ( 'NONE', ( #76, #4 ) ) ;
+#59 = FACE_OUTER_BOUND ( 'NONE', #89, .T. ) ;
+#60 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #103 );
+#61 = SURFACE_STYLE_FILL_AREA ( #88 ) ;
+#62 = SURFACE_SIDE_STYLE ('',( #52 ) ) ;
+#63 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#64 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #78 ) ;
+#65 = ORIENTED_EDGE ( 'NONE', *, *, #79, .T. ) ;
+#66 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#67 = ADVANCED_FACE ( 'NONE', ( #59 ), #40, .T. ) ;
+#68 = ORIENTED_EDGE ( 'NONE', *, *, #141, .T. ) ;
+#69 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #127 ) ;
+#70 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724700, 1.446433227339393800E-017, 0.0000000000000000000 ) ) ;
+#71 = AXIS2_PLACEMENT_3D ( 'NONE', #83, #99, #91 ) ;
+#72 = ORIENTED_EDGE ( 'NONE', *, *, #135, .F. ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724700, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#74 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724700, 1.446433227339393800E-017, 0.5708661417322835600 ) ) ;
+#75 = ADVANCED_FACE ( 'NONE', ( #45 ), #22, .F. ) ;
+#76 = ORIENTED_EDGE ( 'NONE', *, *, #135, .T. ) ;
+#77 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ;
+#78 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#79 = EDGE_CURVE ( 'NONE', #102, #92, #35, .T. ) ;
+#80 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#81 = ORIENTED_EDGE ( 'NONE', *, *, #2, .T. ) ;
+#82 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724700, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#83 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#84 = STYLED_ITEM ( 'NONE', ( #118 ), #93 ) ;
+#85 = EDGE_LOOP ( 'NONE', ( #90, #72, #65, #81 ) ) ;
+#86 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#87 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#88 = FILL_AREA_STYLE ('',( #3 ) ) ;
+#89 = EDGE_LOOP ( 'NONE', ( #77, #68, #121, #9 ) ) ;
+#90 = ORIENTED_EDGE ( 'NONE', *, *, #141, .F. ) ;
+#91 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#92 = VERTEX_POINT ( 'NONE', #73 ) ;
+#93 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #31 ) ;
+#94 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #86 );
+#95 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#96 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#97 = SURFACE_STYLE_USAGE ( .BOTH. , #20 ) ;
+#98 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #44, 'distance_accuracy_value', 'NONE');
+#99 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#100 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #80, 'design' ) ;
+#101 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#102 = VERTEX_POINT ( 'NONE', #32 ) ;
+#103 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#104 =( CONVERSION_BASED_UNIT ( 'INCH', #24 ) LENGTH_UNIT ( ) NAMED_UNIT ( #7 ) );
+#105 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#106 = SHAPE_DEFINITION_REPRESENTATION ( #69, #16 ) ;
+#107 = ORIENTED_EDGE ( 'NONE', *, *, #2, .F. ) ;
+#108 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#109 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.5708661417322835600 ) ) ;
+#110 = ADVANCED_FACE ( 'NONE', ( #115 ), #41, .T. ) ;
+#111 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#112 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#113 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#114 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #14, #108 ) ;
+#115 = FACE_OUTER_BOUND ( 'NONE', #85, .T. ) ;
+#116 = ORIENTED_EDGE ( 'NONE', *, *, #124, .F. ) ;
+#117 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#118 = PRESENTATION_STYLE_ASSIGNMENT (( #147 ) ) ;
+#119 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#120 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #124, .T. ) ;
+#122 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#123 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #15, 'distance_accuracy_value', 'NONE');
+#124 = EDGE_CURVE ( 'NONE', #12, #92, #50, .T. ) ;
+#125 = EDGE_CURVE ( 'NONE', #8, #102, #38, .T. ) ;
+#126 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #132, .NOT_KNOWN. ) ;
+#127 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #126, #100 ) ;
+#128 = FILL_AREA_STYLE_COLOUR ( '', #11 ) ;
+#129 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#130 = AXIS2_PLACEMENT_3D ( 'NONE', #28, #122, #66 ) ;
+#131 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #123 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #15, #95, #25 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#132 = PRODUCT ( 'Trigger_Carriage_Pin', 'Trigger_Carriage_Pin', '', ( #134 ) ) ;
+#133 = AXIS2_PLACEMENT_3D ( 'NONE', #53, #120, #63 ) ;
+#134 = PRODUCT_CONTEXT ( 'NONE', #78, 'mechanical' ) ;
+#135 = EDGE_CURVE ( 'NONE', #102, #8, #6, .T. ) ;
+#136 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #36 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #104, #46, #112 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#137 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #140 ), #136 ) ;
+#138 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #140 ) ) ;
+#139 = PRESENTATION_STYLE_ASSIGNMENT (( #97 ) ) ;
+#140 = STYLED_ITEM ( 'NONE', ( #139 ), #16 ) ;
+#141 = EDGE_CURVE ( 'NONE', #8, #12, #34, .T. ) ;
+#142 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #132 ) ) ;
+#143 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #98 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #44, #111, #55 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#144 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#145 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #87, #19 ) ;
+#146 = AXIS2_PLACEMENT_3D ( 'NONE', #109, #42, #119 ) ;
+#147 = SURFACE_STYLE_USAGE ( .BOTH. , #62 ) ;
+#148 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #27, #101 ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724700, 1.446433227339393800E-017, 0.5708661417322835600 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Trigger_Hinge_Pin.step

@@ -0,0 +1,166 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trigger_Hinge_Pin.step',
+    '2014-05-14T06:09:48',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#2 = FILL_AREA_STYLE_COLOUR ( '', #109 ) ;
+#3 = ORIENTED_EDGE ( 'NONE', *, *, #14, .F. ) ;
+#4 = ORIENTED_EDGE ( 'NONE', *, *, #136, .F. ) ;
+#5 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #82 ) ;
+#6 = SURFACE_STYLE_FILL_AREA ( #89 ) ;
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #136, .T. ) ;
+#8 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#9 = FACE_OUTER_BOUND ( 'NONE', #126, .T. ) ;
+#10 = ORIENTED_EDGE ( 'NONE', *, *, #128, .T. ) ;
+#11 = EDGE_LOOP ( 'NONE', ( #118, #69 ) ) ;
+#12 = SHAPE_DEFINITION_REPRESENTATION ( #59, #20 ) ;
+#13 = PLANE ( 'NONE',  #146 ) ;
+#14 = EDGE_CURVE ( 'NONE', #141, #98, #36, .T. ) ;
+#15 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#16 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ;
+#17 = SURFACE_SIDE_STYLE ('',( #6 ) ) ;
+#18 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#19 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #103, 'distance_accuracy_value', 'NONE');
+#20 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Hinge_Pin', ( #45, #135 ), #145 ) ;
+#21 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#22 = AXIS2_PLACEMENT_3D ( 'NONE', #110, #52, #120 ) ;
+#23 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#24 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#25 = PRESENTATION_STYLE_ASSIGNMENT (( #92 ) ) ;
+#26 = ORIENTED_EDGE ( 'NONE', *, *, #86, .F. ) ;
+#27 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724100, 1.446433227339393100E-017, 0.8858267716535432900 ) ) ;
+#28 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#29 = CIRCLE ( 'NONE', #148, 0.1181102362204724100 ) ;
+#30 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724100, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#31 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#32 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #40, 'distance_accuracy_value', 'NONE');
+#33 =( CONVERSION_BASED_UNIT ( 'INCH', #119 ) LENGTH_UNIT ( ) NAMED_UNIT ( #127 ) );
+#34 = VECTOR ( 'NONE', #78, 39.37007874015748100 ) ;
+#35 = AXIS2_PLACEMENT_3D ( 'NONE', #56, #18, #28 ) ;
+#36 = CIRCLE ( 'NONE', #100, 0.1181102362204724100 ) ;
+#37 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #33, 'distance_accuracy_value', 'NONE');
+#38 = FACE_OUTER_BOUND ( 'NONE', #11, .T. ) ;
+#39 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#40 =( CONVERSION_BASED_UNIT ( 'INCH', #57 ) LENGTH_UNIT ( ) NAMED_UNIT ( #121 ) );
+#41 = SURFACE_STYLE_FILL_AREA ( #99 ) ;
+#42 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#43 = FACE_OUTER_BOUND ( 'NONE', #66, .T. ) ;
+#44 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724100, 0.0000000000000000000, 0.8858267716535432900 ) ) ;
+#45 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #123 ) ;
+#46 = ADVANCED_FACE ( 'NONE', ( #93 ), #61, .T. ) ;
+#47 = ORIENTED_EDGE ( 'NONE', *, *, #14, .T. ) ;
+#48 = AXIS2_PLACEMENT_3D ( 'NONE', #108, #77, #53 ) ;
+#49 = ORIENTED_EDGE ( 'NONE', *, *, #55, .F. ) ;
+#50 = CIRCLE ( 'NONE', #58, 0.1181102362204724100 ) ;
+#51 = FILL_AREA_STYLE_COLOUR ( '', #31 ) ;
+#52 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#53 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#54 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#55 = EDGE_CURVE ( 'NONE', #107, #98, #72, .T. ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.8858267716535432900 ) ) ;
+#57 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #102 );
+#58 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #21, #101 ) ;
+#59 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #133 ) ;
+#60 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#61 = CYLINDRICAL_SURFACE ( 'NONE', #35, 0.1181102362204724100 ) ;
+#62 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.8858267716535432900 ) ) ;
+#64 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #80 ) ;
+#65 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#66 = EDGE_LOOP ( 'NONE', ( #4, #3 ) ) ;
+#67 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#68 = LINE ( 'NONE', #96, #34 ) ;
+#69 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ;
+#70 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #82, 'design' ) ;
+#71 = SURFACE_SIDE_STYLE ('',( #41 ) ) ;
+#72 = LINE ( 'NONE', #44, #76 ) ;
+#73 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #37 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #33, #104, #116 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#74 = ORIENTED_EDGE ( 'NONE', *, *, #55, .T. ) ;
+#75 = CARTESIAN_POINT ( 'NONE',  ( -0.1181102362204724100, 0.0000000000000000000, 0.8858267716535432900 ) ) ;
+#76 = VECTOR ( 'NONE', #67, 39.37007874015748100 ) ;
+#77 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#78 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#79 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#80 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#81 = EDGE_CURVE ( 'NONE', #83, #107, #85, .T. ) ;
+#82 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#83 = VERTEX_POINT ( 'NONE', #27 ) ;
+#84 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#85 = CIRCLE ( 'NONE', #48, 0.1181102362204724100 ) ;
+#86 = EDGE_CURVE ( 'NONE', #107, #83, #50, .T. ) ;
+#87 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#88 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#89 = FILL_AREA_STYLE ('',( #2 ) ) ;
+#90 = CYLINDRICAL_SURFACE ( 'NONE', #142, 0.1181102362204724100 ) ;
+#91 = ORIENTED_EDGE ( 'NONE', *, *, #128, .F. ) ;
+#92 = SURFACE_STYLE_USAGE ( .BOTH. , #71 ) ;
+#93 = FACE_OUTER_BOUND ( 'NONE', #115, .T. ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.8858267716535432900 ) ) ;
+#95 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724100, 1.446433227339393100E-017, 0.8858267716535432900 ) ) ;
+#97 = SURFACE_STYLE_USAGE ( .BOTH. , #17 ) ;
+#98 = VERTEX_POINT ( 'NONE', #30 ) ;
+#99 = FILL_AREA_STYLE ('',( #51 ) ) ;
+#100 = AXIS2_PLACEMENT_3D ( 'NONE', #60, #95, #8 ) ;
+#101 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#102 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#103 =( CONVERSION_BASED_UNIT ( 'INCH', #129 ) LENGTH_UNIT ( ) NAMED_UNIT ( #39 ) );
+#104 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#105 = PRESENTATION_STYLE_ASSIGNMENT (( #97 ) ) ;
+#106 = PRODUCT ( 'Trigger_Hinge_Pin', 'Trigger_Hinge_Pin', '', ( #134 ) ) ;
+#107 = VERTEX_POINT ( 'NONE', #75 ) ;
+#108 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.8858267716535432900 ) ) ;
+#109 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.8858267716535432900 ) ) ;
+#111 = ADVANCED_FACE ( 'NONE', ( #38 ), #147, .T. ) ;
+#112 = ADVANCED_FACE ( 'NONE', ( #43 ), #13, .F. ) ;
+#113 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#114 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#115 = EDGE_LOOP ( 'NONE', ( #16, #10, #47, #49 ) ) ;
+#116 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#117 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #140 ), #73 ) ;
+#118 = ORIENTED_EDGE ( 'NONE', *, *, #86, .T. ) ;
+#119 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #84 );
+#120 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#121 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#122 = CARTESIAN_POINT ( 'NONE',  ( 0.1181102362204724100, 1.446433227339393100E-017, 0.0000000000000000000 ) ) ;
+#123 = CLOSED_SHELL ( 'NONE', ( #46, #144, #111, #112 ) ) ;
+#124 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#125 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #140 ) ) ;
+#126 = EDGE_LOOP ( 'NONE', ( #91, #26, #74, #7 ) ) ;
+#127 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#128 = EDGE_CURVE ( 'NONE', #83, #141, #68, .T. ) ;
+#129 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #24 );
+#130 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #106 ) ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#132 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #106, .NOT_KNOWN. ) ;
+#133 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #132, #70 ) ;
+#134 = PRODUCT_CONTEXT ( 'NONE', #80, 'mechanical' ) ;
+#135 = AXIS2_PLACEMENT_3D ( 'NONE', #23, #124, #65 ) ;
+#136 = EDGE_CURVE ( 'NONE', #98, #141, #29, .T. ) ;
+#137 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #19 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #103, #42, #114 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#138 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #143 ), #137 ) ;
+#139 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #143 ) ) ;
+#140 = STYLED_ITEM ( 'NONE', ( #25 ), #45 ) ;
+#141 = VERTEX_POINT ( 'NONE', #122 ) ;
+#142 = AXIS2_PLACEMENT_3D ( 'NONE', #63, #88, #62 ) ;
+#143 = STYLED_ITEM ( 'NONE', ( #105 ), #20 ) ;
+#144 = ADVANCED_FACE ( 'NONE', ( #9 ), #90, .T. ) ;
+#145 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #32 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #40, #113, #54 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#146 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #87, #15 ) ;
+#147 = PLANE ( 'NONE',  #22 ) ;
+#148 = AXIS2_PLACEMENT_3D ( 'NONE', #131, #79, #1 ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Trigger_Plate_Cover_Left.step

@@ -0,0 +1,528 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trigger_Plate_Cover_Left.step',
+    '2014-05-14T06:09:46',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039378100, 0.3838582677165354200, -0.1771653543307086500 ) ) ;
+#2 = FACE_OUTER_BOUND ( 'NONE', #331, .T. ) ;
+#3 = CARTESIAN_POINT ( 'NONE',  ( -0.9251968503937018100, 0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#4 = ADVANCED_FACE ( 'NONE', ( #346 ), #348, .T. ) ;
+#5 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ;
+#6 = EDGE_LOOP ( 'NONE', ( #460, #133, #358, #97 ) ) ;
+#7 = CYLINDRICAL_SURFACE ( 'NONE', #243, 0.05905511811023613600 ) ;
+#8 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#9 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039378100, 0.3838582677165354200, -0.1771653543307086500 ) ) ;
+#10 =( CONVERSION_BASED_UNIT ( 'INCH', #370 ) LENGTH_UNIT ( ) NAMED_UNIT ( #58 ) );
+#11 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, 0.3838582677165353100, -0.1771653543307086500 ) ) ;
+#12 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.2165354330708661500 ) ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #381, .T. ) ;
+#16 = ORIENTED_EDGE ( 'NONE', *, *, #404, .T. ) ;
+#17 =( CONVERSION_BASED_UNIT ( 'INCH', #75 ) LENGTH_UNIT ( ) NAMED_UNIT ( #497 ) );
+#18 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#19 = CYLINDRICAL_SURFACE ( 'NONE', #353, 0.03937007874015748000 ) ;
+#20 = ORIENTED_EDGE ( 'NONE', *, *, #473, .T. ) ;
+#21 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#22 = ORIENTED_EDGE ( 'NONE', *, *, #364, .T. ) ;
+#23 = FACE_OUTER_BOUND ( 'NONE', #6, .T. ) ;
+#24 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#25 = CIRCLE ( 'NONE', #297, 0.01968503937007875700 ) ;
+#26 = EDGE_LOOP ( 'NONE', ( #104, #197, #20, #92, #509 ) ) ;
+#27 = TOROIDAL_SURFACE ( 'NONE', #356, 0.01968503937007875700, 0.03937007874015748000 ) ;
+#28 = ORIENTED_EDGE ( 'NONE', *, *, #390, .T. ) ;
+#29 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ;
+#30 = CIRCLE ( 'NONE', #253, 0.05905511811023613600 ) ;
+#31 = ORIENTED_EDGE ( 'NONE', *, *, #376, .F. ) ;
+#32 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#33 = VECTOR ( 'NONE', #126, 39.37007874015748100 ) ;
+#34 = VERTEX_POINT ( 'NONE', #488 ) ;
+#35 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#36 = ORIENTED_EDGE ( 'NONE', *, *, #403, .T. ) ;
+#37 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#38 = VERTEX_POINT ( 'NONE', #116 ) ;
+#39 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#40 = CIRCLE ( 'NONE', #256, 0.05905511811023613600 ) ;
+#41 = ADVANCED_FACE ( 'NONE', ( #218 ), #27, .T. ) ;
+#42 = LINE ( 'NONE', #59, #195 ) ;
+#43 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#44 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#45 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#46 = ORIENTED_EDGE ( 'NONE', *, *, #388, .T. ) ;
+#47 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -6.938893903907222900E-015, 0.0000000000000000000 ) ) ;
+#48 = PLANE ( 'NONE',  #350 ) ;
+#49 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#50 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#51 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ;
+#52 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, 0.3838582677165355300, -0.2165354330708661500 ) ) ;
+#53 = ORIENTED_EDGE ( 'NONE', *, *, #387, .T. ) ;
+#54 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#55 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#56 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#57 = CIRCLE ( 'NONE', #261, 0.03937007874015748000 ) ;
+#58 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#59 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, 0.3838582677165350300, -0.2165354330708661500 ) ) ;
+#60 = FACE_OUTER_BOUND ( 'NONE', #205, .T. ) ;
+#61 = VERTEX_POINT ( 'NONE', #183 ) ;
+#62 = CIRCLE ( 'NONE', #282, 0.03937007874015748000 ) ;
+#63 = EDGE_LOOP ( 'NONE', ( #208, #475, #79, #248, #154, #479, #16, #36, #51, #379 ) ) ;
+#64 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#65 = SURFACE_STYLE_FILL_AREA ( #455 ) ;
+#66 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#67 = ORIENTED_EDGE ( 'NONE', *, *, #396, .T. ) ;
+#68 = VERTEX_POINT ( 'NONE', #227 ) ;
+#69 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#70 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ;
+#71 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039378100, -0.3838582677165354200, -0.2165354330708661500 ) ) ;
+#72 = VECTOR ( 'NONE', #217, 39.37007874015748100 ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039373700, 0.4429133858267716400, -0.1771653543307086500 ) ) ;
+#74 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#75 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #234 );
+#76 = ADVANCED_FACE ( 'NONE', ( #122 ), #19, .T. ) ;
+#77 = VERTEX_POINT ( 'NONE', #457 ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#79 = ORIENTED_EDGE ( 'NONE', *, *, #421, .F. ) ;
+#80 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#81 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#82 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#83 = VERTEX_POINT ( 'NONE', #490 ) ;
+#84 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, -0.3838582677165355300, -0.2165354330708661500 ) ) ;
+#85 = ORIENTED_EDGE ( 'NONE', *, *, #412, .T. ) ;
+#86 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#87 = FACE_OUTER_BOUND ( 'NONE', #26, .T. ) ;
+#88 = CARTESIAN_POINT ( 'NONE',  ( -0.9251968503937018100, 0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#90 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#91 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#92 = ORIENTED_EDGE ( 'NONE', *, *, #503, .F. ) ;
+#93 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #287 );
+#94 = ORIENTED_EDGE ( 'NONE', *, *, #440, .T. ) ;
+#95 = CIRCLE ( 'NONE', #289, 0.03937007874015748000 ) ;
+#96 = FACE_OUTER_BOUND ( 'NONE', #260, .T. ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #368, .T. ) ;
+#98 = VECTOR ( 'NONE', #209, 39.37007874015748100 ) ;
+#99 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #10, 'distance_accuracy_value', 'NONE');
+#100 = VERTEX_POINT ( 'NONE', #186 ) ;
+#101 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#102 = FACE_OUTER_BOUND ( 'NONE', #130, .T. ) ;
+#103 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#104 = ORIENTED_EDGE ( 'NONE', *, *, #420, .F. ) ;
+#105 = TOROIDAL_SURFACE ( 'NONE', #250, 0.01968503937007863900, 0.03937007874015748000 ) ;
+#106 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, -0.3838582677165353100, -0.1771653543307086500 ) ) ;
+#107 = ADVANCED_FACE ( 'NONE', ( #204 ), #311, .T. ) ;
+#108 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#109 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#110 = VECTOR ( 'NONE', #64, 39.37007874015748100 ) ;
+#111 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#112 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #109 ) ;
+#113 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#114 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#115 = EDGE_LOOP ( 'NONE', ( #342, #415, #464, #504 ) ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.4429133858267716400, -0.1771653543307086500 ) ) ;
+#117 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#118 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Plate_Cover_Left', ( #187, #220 ), #247 ) ;
+#119 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#121 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#122 = FACE_OUTER_BOUND ( 'NONE', #164, .T. ) ;
+#123 = VERTEX_POINT ( 'NONE', #323 ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#125 = VECTOR ( 'NONE', #321, 39.37007874015748100 ) ;
+#126 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#127 = EDGE_LOOP ( 'NONE', ( #15, #391 ) ) ;
+#128 = CYLINDRICAL_SURFACE ( 'NONE', #308, 0.05905511811023613600 ) ;
+#129 = VERTEX_POINT ( 'NONE', #84 ) ;
+#130 = EDGE_LOOP ( 'NONE', ( #265, #207, #343, #313, #337, #507, #249, #31 ) ) ;
+#131 = EDGE_LOOP ( 'NONE', ( #223, #472, #5, #46 ) ) ;
+#132 = LINE ( 'NONE', #185, #468 ) ;
+#133 = ORIENTED_EDGE ( 'NONE', *, *, #376, .T. ) ;
+#134 = CYLINDRICAL_SURFACE ( 'NONE', #316, 0.03937007874015748000 ) ;
+#135 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #307, 'distance_accuracy_value', 'NONE');
+#136 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#137 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #17, 'distance_accuracy_value', 'NONE');
+#138 = ORIENTED_EDGE ( 'NONE', *, *, #445, .T. ) ;
+#139 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, -0.3838582677165350300, -0.2165354330708661500 ) ) ;
+#140 = EDGE_LOOP ( 'NONE', ( #470, #441, #355, #372 ) ) ;
+#141 = EDGE_LOOP ( 'NONE', ( #325, #293, #213, #236, #202 ) ) ;
+#142 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#143 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#144 = CIRCLE ( 'NONE', #266, 0.05905511811023613600 ) ;
+#145 = ADVANCED_FACE ( 'NONE', ( #330 ), #48, .F. ) ;
+#146 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -6.938893903907222900E-015, 0.0000000000000000000 ) ) ;
+#147 = LINE ( 'NONE', #198, #33 ) ;
+#148 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, -0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#150 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#151 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#152 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039378100, -0.3838582677165354200, -0.1771653543307086500 ) ) ;
+#153 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#154 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ;
+#155 = FILL_AREA_STYLE_COLOUR ( '', #446 ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#157 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#158 = CYLINDRICAL_SURFACE ( 'NONE', #279, 0.03937007874015748000 ) ;
+#159 = FILL_AREA_STYLE_COLOUR ( '', #162 ) ;
+#160 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.4035433070866141200, -0.2165354330708661500 ) ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, 0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#162 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ;
+#164 = EDGE_LOOP ( 'NONE', ( #299, #189, #67, #167 ) ) ;
+#165 = CIRCLE ( 'NONE', #288, 0.05905511811023627500 ) ;
+#166 = VERTEX_POINT ( 'NONE', #233 ) ;
+#167 = ORIENTED_EDGE ( 'NONE', *, *, #389, .T. ) ;
+#168 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#169 = EDGE_LOOP ( 'NONE', ( #493, #409, #173, #163 ) ) ;
+#170 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #215 ) ;
+#171 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#172 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#173 = ORIENTED_EDGE ( 'NONE', *, *, #413, .T. ) ;
+#174 = VECTOR ( 'NONE', #142, 39.37007874015748100 ) ;
+#175 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#176 = PRESENTATION_STYLE_ASSIGNMENT (( #494 ) ) ;
+#177 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.4429133858267716400, -0.1771653543307086500 ) ) ;
+#178 = ADVANCED_FACE ( 'NONE', ( #102 ), #492, .T. ) ;
+#179 = VERTEX_POINT ( 'NONE', #149 ) ;
+#180 = PRODUCT ( 'Trigger_Plate_Cover_Left', 'Trigger_Plate_Cover_Left', '', ( #417 ) ) ;
+#181 = ADVANCED_FACE ( 'NONE', ( #2 ), #428, .T. ) ;
+#182 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#183 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039373700, -0.4429133858267716400, -0.1771653543307086500 ) ) ;
+#184 = SURFACE_SIDE_STYLE ('',( #65 ) ) ;
+#185 = CARTESIAN_POINT ( 'NONE',  ( 0.9251968503937018100, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039373700, -0.4035433070866141800, -0.2165354330708661500 ) ) ;
+#187 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude1', #334 ) ;
+#188 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#189 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ;
+#190 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#191 = CIRCLE ( 'NONE', #292, 0.01968503937007875700 ) ;
+#192 = SURFACE_SIDE_STYLE ('',( #296 ) ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.4035433070866141200, -0.1771653543307086500 ) ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#195 = VECTOR ( 'NONE', #333, 39.37007874015748100 ) ;
+#196 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#197 = ORIENTED_EDGE ( 'NONE', *, *, #437, .T. ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, 0.0000000000000000000, -0.1771653543307086500 ) ) ;
+#199 = CIRCLE ( 'NONE', #245, 0.05905511811023613600 ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #437, .F. ) ;
+#201 = LINE ( 'NONE', #139, #303 ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #368, .F. ) ;
+#203 = VERTEX_POINT ( 'NONE', #88 ) ;
+#204 = FACE_OUTER_BOUND ( 'NONE', #300, .T. ) ;
+#205 = EDGE_LOOP ( 'NONE', ( #53, #28, #268, #471 ) ) ;
+#206 = CIRCLE ( 'NONE', #251, 0.05905511811023613600 ) ;
+#207 = ORIENTED_EDGE ( 'NONE', *, *, #394, .F. ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #440, .F. ) ;
+#209 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#210 = CIRCLE ( 'NONE', #298, 0.03937007874015748000 ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, -0.3838582677165350300, -0.1771653543307086500 ) ) ;
+#212 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #180 ) ) ;
+#213 = ORIENTED_EDGE ( 'NONE', *, *, #434, .T. ) ;
+#214 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #180, .NOT_KNOWN. ) ;
+#215 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #214, #501 ) ;
+#216 = ORIENTED_EDGE ( 'NONE', *, *, #392, .T. ) ;
+#217 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#218 = FACE_OUTER_BOUND ( 'NONE', #131, .T. ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, 0.0000000000000000000, -0.1771653543307086500 ) ) ;
+#220 = AXIS2_PLACEMENT_3D ( 'NONE', #89, #82, #373 ) ;
+#221 = LINE ( 'NONE', #117, #335 ) ;
+#222 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#223 = ORIENTED_EDGE ( 'NONE', *, *, #396, .F. ) ;
+#224 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#225 = ADVANCED_FACE ( 'NONE', ( #96 ), #382, .T. ) ;
+#226 = CIRCLE ( 'NONE', #309, 0.05905511811023613600 ) ;
+#227 = CARTESIAN_POINT ( 'NONE',  ( 0.9251968503937018100, -0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#228 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#229 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#230 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #99 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #10, #272, #45 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#231 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #240 ), #230 ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( -0.9251968503937018100, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#233 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.4429133858267716400, -0.1771653543307086500 ) ) ;
+#234 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#235 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #240 ) ) ;
+#236 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ;
+#237 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#238 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#239 = CIRCLE ( 'NONE', #257, 0.05905511811023613600 ) ;
+#240 = STYLED_ITEM ( 'NONE', ( #487 ), #118 ) ;
+#241 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#242 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#243 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #18, #495 ) ;
+#244 = FACE_OUTER_BOUND ( 'NONE', #127, .T. ) ;
+#245 = AXIS2_PLACEMENT_3D ( 'NONE', #194, #499, #238 ) ;
+#246 = VERTEX_POINT ( 'NONE', #423 ) ;
+#247 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #135 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #307, #317, #80 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#248 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ;
+#249 = ORIENTED_EDGE ( 'NONE', *, *, #364, .F. ) ;
+#250 = AXIS2_PLACEMENT_3D ( 'NONE', #120, #491, #426 ) ;
+#251 = AXIS2_PLACEMENT_3D ( 'NONE', #283, #55, #329 ) ;
+#252 = CYLINDRICAL_SURFACE ( 'NONE', #275, 0.05905511811023613600 ) ;
+#253 = AXIS2_PLACEMENT_3D ( 'NONE', #327, #86, #380 ) ;
+#254 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #462, #190 ) ;
+#255 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#256 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #276, #49 ) ;
+#257 = AXIS2_PLACEMENT_3D ( 'NONE', #374, #113, #419 ) ;
+#258 = AXIS2_PLACEMENT_3D ( 'NONE', #11, #273, #47 ) ;
+#259 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039378100, 0.3838582677165354200, -0.2165354330708661500 ) ) ;
+#260 = EDGE_LOOP ( 'NONE', ( #347, #138 ) ) ;
+#261 = AXIS2_PLACEMENT_3D ( 'NONE', #414, #148, #456 ) ;
+#262 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039373700, 0.4035433070866141200, -0.1771653543307086500 ) ) ;
+#263 = CIRCLE ( 'NONE', #270, 0.05905511811023613600 ) ;
+#264 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#265 = ORIENTED_EDGE ( 'NONE', *, *, #397, .F. ) ;
+#266 = AXIS2_PLACEMENT_3D ( 'NONE', #43, #318, #81 ) ;
+#267 = AXIS2_PLACEMENT_3D ( 'NONE', #453, #182, #486 ) ;
+#268 = ORIENTED_EDGE ( 'NONE', *, *, #385, .T. ) ;
+#269 = ADVANCED_FACE ( 'NONE', ( #60 ), #433, .T. ) ;
+#270 = AXIS2_PLACEMENT_3D ( 'NONE', #78, #366, #108 ) ;
+#271 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#272 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#273 = DIRECTION ( 'NONE',  ( 6.938893903907221300E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#274 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#275 = AXIS2_PLACEMENT_3D ( 'NONE', #405, #222, #103 ) ;
+#276 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#277 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#278 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.4035433070866141200, -0.2165354330708661500 ) ) ;
+#279 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #312, #74 ) ;
+#280 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#281 = LINE ( 'NONE', #447, #72 ) ;
+#282 = AXIS2_PLACEMENT_3D ( 'NONE', #485, #224, #8 ) ;
+#283 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#284 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#285 = AXIS2_PLACEMENT_3D ( 'NONE', #106, #408, #146 ) ;
+#286 = ORIENTED_EDGE ( 'NONE', *, *, #381, .F. ) ;
+#287 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#288 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #264, #39 ) ;
+#289 = AXIS2_PLACEMENT_3D ( 'NONE', #262, #37, #310 ) ;
+#290 = ORIENTED_EDGE ( 'NONE', *, *, #429, .T. ) ;
+#291 = AXIS2_PLACEMENT_3D ( 'NONE', #444, #175, #480 ) ;
+#292 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #357, #101 ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ;
+#294 = VECTOR ( 'NONE', #483, 39.37007874015748100 ) ;
+#295 = AXIS2_PLACEMENT_3D ( 'NONE', #443, #172, #478 ) ;
+#296 = SURFACE_STYLE_FILL_AREA ( #463 ) ;
+#297 = AXIS2_PLACEMENT_3D ( 'NONE', #259, #35, #305 ) ;
+#298 = AXIS2_PLACEMENT_3D ( 'NONE', #439, #171, #477 ) ;
+#299 = ORIENTED_EDGE ( 'NONE', *, *, #387, .F. ) ;
+#300 = EDGE_LOOP ( 'NONE', ( #200, #286, #498, #94 ) ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #302, #66, #354 ) ;
+#302 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, 0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#303 = VECTOR ( 'NONE', #69, 39.37007874015748100 ) ;
+#304 = AXIS2_PLACEMENT_3D ( 'NONE', #136, #436, #168 ) ;
+#305 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#306 = ORIENTED_EDGE ( 'NONE', *, *, #404, .F. ) ;
+#307 =( CONVERSION_BASED_UNIT ( 'INCH', #93 ) LENGTH_UNIT ( ) NAMED_UNIT ( #466 ) );
+#308 = AXIS2_PLACEMENT_3D ( 'NONE', #21, #91, #241 ) ;
+#309 = AXIS2_PLACEMENT_3D ( 'NONE', #502, #242, #24 ) ;
+#310 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#311 = CYLINDRICAL_SURFACE ( 'NONE', #352, 0.05905511811023613600 ) ;
+#312 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#313 = ORIENTED_EDGE ( 'NONE', *, *, #390, .F. ) ;
+#314 = AXIS2_PLACEMENT_3D ( 'NONE', #124, #196, #500 ) ;
+#315 = ADVANCED_FACE ( 'NONE', ( #476 ), #134, .T. ) ;
+#316 = AXIS2_PLACEMENT_3D ( 'NONE', #193, #90, #56 ) ;
+#317 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#318 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#319 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4035433070866141200, -0.1771653543307086500 ) ) ;
+#320 = CIRCLE ( 'NONE', #295, 0.01968503937007862200 ) ;
+#321 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#322 = AXIS2_PLACEMENT_3D ( 'NONE', #237, #121, #284 ) ;
+#323 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, 0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#324 = AXIS2_PLACEMENT_3D ( 'NONE', #119, #157, #465 ) ;
+#325 = ORIENTED_EDGE ( 'NONE', *, *, #383, .F. ) ;
+#326 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, 0.0000000000000000000, -0.1771653543307086500 ) ) ;
+#327 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#328 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #137 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #17, #280, #54 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#329 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#330 = FACE_OUTER_BOUND ( 'NONE', #63, .T. ) ;
+#331 = EDGE_LOOP ( 'NONE', ( #29, #306, #290, #22 ) ) ;
+#332 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #339 ), #328 ) ;
+#333 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#334 = CLOSED_SHELL ( 'NONE', ( #410, #484, #367, #107, #145, #178, #269, #406, #76, #4, #41, #315, #181, #451, #363, #225 ) ) ;
+#335 = VECTOR ( 'NONE', #422, 39.37007874015748100 ) ;
+#336 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #339 ) ) ;
+#337 = ORIENTED_EDGE ( 'NONE', *, *, #389, .F. ) ;
+#338 = EDGE_LOOP ( 'NONE', ( #482, #216, #85, #70 ) ) ;
+#339 = STYLED_ITEM ( 'NONE', ( #176 ), #187 ) ;
+#340 = AXIS2_PLACEMENT_3D ( 'NONE', #326, #378, #114 ) ;
+#341 = LINE ( 'NONE', #398, #110 ) ;
+#342 = ORIENTED_EDGE ( 'NONE', *, *, #412, .F. ) ;
+#343 = ORIENTED_EDGE ( 'NONE', *, *, #392, .F. ) ;
+#344 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #277, #50 ) ;
+#345 = AXIS2_PLACEMENT_3D ( 'NONE', #506, #255, #32 ) ;
+#346 = FACE_OUTER_BOUND ( 'NONE', #115, .T. ) ;
+#347 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ;
+#348 = TOROIDAL_SURFACE ( 'NONE', #359, 0.01968503937007875700, 0.03937007874015748000 ) ;
+#349 = CIRCLE ( 'NONE', #254, 0.05905511811023613600 ) ;
+#350 = AXIS2_PLACEMENT_3D ( 'NONE', #375, #151, #461 ) ;
+#351 = CIRCLE ( 'NONE', #304, 0.05905511811023613600 ) ;
+#352 = AXIS2_PLACEMENT_3D ( 'NONE', #274, #12, #416 ) ;
+#353 = AXIS2_PLACEMENT_3D ( 'NONE', #319, #371, #111 ) ;
+#354 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#355 = ORIENTED_EDGE ( 'NONE', *, *, #432, .T. ) ;
+#356 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #271, #44 ) ;
+#357 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#358 = ORIENTED_EDGE ( 'NONE', *, *, #429, .F. ) ;
+#359 = AXIS2_PLACEMENT_3D ( 'NONE', #152, #188, #143 ) ;
+#360 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#361 = VERTEX_POINT ( 'NONE', #160 ) ;
+#362 = LINE ( 'NONE', #232, #125 ) ;
+#363 = ADVANCED_FACE ( 'NONE', ( #244 ), #467, .T. ) ;
+#364 = EDGE_CURVE ( 'NONE', #129, #34, #42, .T. ) ;
+#365 = FACE_OUTER_BOUND ( 'NONE', #141, .T. ) ;
+#366 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#367 = ADVANCED_FACE ( 'NONE', ( #365 ), #128, .T. ) ;
+#368 = EDGE_CURVE ( 'NONE', #246, #38, #226, .T. ) ;
+#369 = EDGE_CURVE ( 'NONE', #123, #386, #147, .T. ) ;
+#370 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #228 );
+#371 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#372 = ORIENTED_EDGE ( 'NONE', *, *, #434, .F. ) ;
+#373 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#374 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#375 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -0.1771653543307086500 ) ) ;
+#376 = EDGE_CURVE ( 'NONE', #449, #129, #469, .T. ) ;
+#377 = VERTEX_POINT ( 'NONE', #161 ) ;
+#378 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#379 = ORIENTED_EDGE ( 'NONE', *, *, #473, .F. ) ;
+#380 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#381 = EDGE_CURVE ( 'NONE', #377, #203, #351, .T. ) ;
+#382 = PLANE ( 'NONE',  #324 ) ;
+#383 = EDGE_CURVE ( 'NONE', #179, #246, #341, .T. ) ;
+#384 = CIRCLE ( 'NONE', #285, 0.03937007874015751400 ) ;
+#385 = EDGE_CURVE ( 'NONE', #452, #123, #454, .T. ) ;
+#386 = VERTEX_POINT ( 'NONE', #211 ) ;
+#387 = EDGE_CURVE ( 'NONE', #166, #361, #210, .T. ) ;
+#388 = EDGE_CURVE ( 'NONE', #34, #83, #25, .T. ) ;
+#389 = EDGE_CURVE ( 'NONE', #83, #361, #438, .T. ) ;
+#390 = EDGE_CURVE ( 'NONE', #361, #452, #320, .T. ) ;
+#391 = ORIENTED_EDGE ( 'NONE', *, *, #420, .T. ) ;
+#392 = EDGE_CURVE ( 'NONE', #452, #77, #201, .T. ) ;
+#393 = FACE_OUTER_BOUND ( 'NONE', #338, .T. ) ;
+#394 = EDGE_CURVE ( 'NONE', #77, #100, #191, .T. ) ;
+#395 = EDGE_CURVE ( 'NONE', #100, #61, #510, .T. ) ;
+#396 = EDGE_CURVE ( 'NONE', #401, #83, #95, .T. ) ;
+#397 = EDGE_CURVE ( 'NONE', #100, #449, #425, .T. ) ;
+#398 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#399 = EDGE_CURVE ( 'NONE', #401, #166, #505, .T. ) ;
+#400 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.4035433070866141200, -0.2165354330708661500 ) ) ;
+#401 = VERTEX_POINT ( 'NONE', #73 ) ;
+#402 = VECTOR ( 'NONE', #360, 39.37007874015748100 ) ;
+#403 = EDGE_CURVE ( 'NONE', #430, #401, #165, .T. ) ;
+#404 = EDGE_CURVE ( 'NONE', #246, #430, #281, .T. ) ;
+#405 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#406 = ADVANCED_FACE ( 'NONE', ( #393 ), #158, .T. ) ;
+#407 = EDGE_CURVE ( 'NONE', #61, #38, #496, .T. ) ;
+#408 = DIRECTION ( 'NONE',  ( 6.938893903907221300E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#409 = ORIENTED_EDGE ( 'NONE', *, *, #397, .T. ) ;
+#410 = ADVANCED_FACE ( 'NONE', ( #87 ), #252, .T. ) ;
+#411 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, 0.3838582677165350300, -0.1771653543307086500 ) ) ;
+#412 = EDGE_CURVE ( 'NONE', #77, #386, #384, .T. ) ;
+#413 = EDGE_CURVE ( 'NONE', #449, #38, #62, .T. ) ;
+#414 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, -0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#415 = ORIENTED_EDGE ( 'NONE', *, *, #394, .T. ) ;
+#416 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#417 = PRODUCT_CONTEXT ( 'NONE', #109, 'mechanical' ) ;
+#418 = VERTEX_POINT ( 'NONE', #3 ) ;
+#419 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#420 = EDGE_CURVE ( 'NONE', #203, #377, #263, .T. ) ;
+#421 = EDGE_CURVE ( 'NONE', #61, #386, #481, .T. ) ;
+#422 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#423 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, -0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#424 = VERTEX_POINT ( 'NONE', #450 ) ;
+#425 = LINE ( 'NONE', #400, #174 ) ;
+#426 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#427 = EDGE_CURVE ( 'NONE', #68, #38, #144, .T. ) ;
+#428 = CYLINDRICAL_SURFACE ( 'NONE', #340, 0.03937007874015748000 ) ;
+#429 = EDGE_CURVE ( 'NONE', #246, #129, #57, .T. ) ;
+#430 = VERTEX_POINT ( 'NONE', #411 ) ;
+#431 = EDGE_CURVE ( 'NONE', #430, #34, #474, .T. ) ;
+#432 = EDGE_CURVE ( 'NONE', #246, #68, #239, .T. ) ;
+#433 = TOROIDAL_SURFACE ( 'NONE', #322, 0.01968503937007863900, 0.03937007874015748000 ) ;
+#434 = EDGE_CURVE ( 'NONE', #424, #68, #132, .T. ) ;
+#435 = EDGE_CURVE ( 'NONE', #424, #179, #40, .T. ) ;
+#436 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#437 = EDGE_CURVE ( 'NONE', #203, #418, #362, .T. ) ;
+#438 = LINE ( 'NONE', #508, #98 ) ;
+#439 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.4035433070866141200, -0.1771653543307086500 ) ) ;
+#440 = EDGE_CURVE ( 'NONE', #123, #418, #349, .T. ) ;
+#441 = ORIENTED_EDGE ( 'NONE', *, *, #383, .T. ) ;
+#442 = EDGE_CURVE ( 'NONE', #377, #123, #221, .T. ) ;
+#443 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, -0.2165354330708661500 ) ) ;
+#444 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039373700, -0.4035433070866141800, -0.1771653543307086500 ) ) ;
+#445 = EDGE_CURVE ( 'NONE', #179, #424, #30, .T. ) ;
+#446 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#447 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, 0.0000000000000000000, -0.1771653543307086500 ) ) ;
+#448 = FACE_OUTER_BOUND ( 'NONE', #140, .T. ) ;
+#449 = VERTEX_POINT ( 'NONE', #278 ) ;
+#450 = CARTESIAN_POINT ( 'NONE',  ( 0.9251968503937018100, -0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#451 = ADVANCED_FACE ( 'NONE', ( #23 ), #105, .T. ) ;
+#452 = VERTEX_POINT ( 'NONE', #52 ) ;
+#453 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039378100, -0.3838582677165354200, -0.1771653543307086500 ) ) ;
+#454 = CIRCLE ( 'NONE', #301, 0.03937007874015748000 ) ;
+#455 = FILL_AREA_STYLE ('',( #159 ) ) ;
+#456 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#457 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, -0.3838582677165353100, -0.2165354330708661500 ) ) ;
+#458 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #150 ) ;
+#459 = SHAPE_DEFINITION_REPRESENTATION ( #170, #118 ) ;
+#460 = ORIENTED_EDGE ( 'NONE', *, *, #413, .F. ) ;
+#461 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#462 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#463 = FILL_AREA_STYLE ('',( #155 ) ) ;
+#464 = ORIENTED_EDGE ( 'NONE', *, *, #395, .T. ) ;
+#465 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#466 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#467 = PLANE ( 'NONE',  #314 ) ;
+#468 = VECTOR ( 'NONE', #229, 39.37007874015748100 ) ;
+#469 = CIRCLE ( 'NONE', #345, 0.01968503937007862200 ) ;
+#470 = ORIENTED_EDGE ( 'NONE', *, *, #445, .F. ) ;
+#471 = ORIENTED_EDGE ( 'NONE', *, *, #503, .T. ) ;
+#472 = ORIENTED_EDGE ( 'NONE', *, *, #403, .F. ) ;
+#473 = EDGE_CURVE ( 'NONE', #418, #166, #206, .T. ) ;
+#474 = CIRCLE ( 'NONE', #258, 0.03937007874015751400 ) ;
+#475 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ;
+#476 = FACE_OUTER_BOUND ( 'NONE', #169, .T. ) ;
+#477 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#478 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#479 = ORIENTED_EDGE ( 'NONE', *, *, #432, .F. ) ;
+#480 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#481 = CIRCLE ( 'NONE', #267, 0.05905511811023627500 ) ;
+#482 = ORIENTED_EDGE ( 'NONE', *, *, #385, .F. ) ;
+#483 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#484 = ADVANCED_FACE ( 'NONE', ( #448 ), #7, .T. ) ;
+#485 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.4035433070866141200, -0.1771653543307086500 ) ) ;
+#486 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#487 = PRESENTATION_STYLE_ASSIGNMENT (( #489 ) ) ;
+#488 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, 0.3838582677165353100, -0.2165354330708661500 ) ) ;
+#489 = SURFACE_STYLE_USAGE ( .BOTH. , #184 ) ;
+#490 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039373700, 0.4035433070866141800, -0.2165354330708661500 ) ) ;
+#491 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#492 = PLANE ( 'NONE',  #344 ) ;
+#493 = ORIENTED_EDGE ( 'NONE', *, *, #395, .F. ) ;
+#494 = SURFACE_STYLE_USAGE ( .BOTH. , #192 ) ;
+#495 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#496 = LINE ( 'NONE', #177, #294 ) ;
+#497 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#498 = ORIENTED_EDGE ( 'NONE', *, *, #442, .T. ) ;
+#499 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#500 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#501 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #150, 'design' ) ;
+#502 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, -0.1771653543307086500 ) ) ;
+#503 = EDGE_CURVE ( 'NONE', #123, #166, #199, .T. ) ;
+#504 = ORIENTED_EDGE ( 'NONE', *, *, #421, .T. ) ;
+#505 = LINE ( 'NONE', #511, #402 ) ;
+#506 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, -0.2165354330708661500 ) ) ;
+#507 = ORIENTED_EDGE ( 'NONE', *, *, #388, .F. ) ;
+#508 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.4035433070866141200, -0.2165354330708661500 ) ) ;
+#509 = ORIENTED_EDGE ( 'NONE', *, *, #442, .F. ) ;
+#510 = CIRCLE ( 'NONE', #291, 0.03937007874015748000 ) ;
+#511 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4429133858267716400, -0.1771653543307086500 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Trigger_Plate_Cover_Right.step

@@ -0,0 +1,528 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trigger_Plate_Cover_Right.step',
+    '2014-05-14T06:09:22',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = ADVANCED_FACE ( 'NONE', ( #408 ), #44, .T. ) ;
+#2 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039378100, -0.3838582677165354200, 0.1771653543307086500 ) ) ;
+#3 = FACE_OUTER_BOUND ( 'NONE', #491, .T. ) ;
+#4 = EDGE_LOOP ( 'NONE', ( #166, #171, #375, #242 ) ) ;
+#5 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039373700, -0.4035433070866141800, 0.1771653543307086500 ) ) ;
+#6 = TOROIDAL_SURFACE ( 'NONE', #430, 0.01968503937007863900, 0.03937007874015748000 ) ;
+#7 = CARTESIAN_POINT ( 'NONE',  ( 0.9251968503937018100, -0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#8 = VERTEX_POINT ( 'NONE', #272 ) ;
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #203, .F. ) ;
+#10 = EDGE_CURVE ( 'NONE', #8, #383, #114, .T. ) ;
+#11 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#12 = LINE ( 'NONE', #57, #99 ) ;
+#13 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#14 = VERTEX_POINT ( 'NONE', #486 ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #141, .F. ) ;
+#16 = SURFACE_STYLE_FILL_AREA ( #452 ) ;
+#17 = VECTOR ( 'NONE', #289, 39.37007874015748100 ) ;
+#18 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#19 = CLOSED_SHELL ( 'NONE', ( #290, #68, #115, #183, #36, #72, #1, #406, #466, #359, #410, #323, #111, #149, #225, #257 ) ) ;
+#20 = EDGE_CURVE ( 'NONE', #133, #8, #392, .T. ) ;
+#21 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#22 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ;
+#23 = EDGE_LOOP ( 'NONE', ( #42, #480, #293, #205 ) ) ;
+#24 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#25 = VERTEX_POINT ( 'NONE', #55 ) ;
+#26 = PLANE ( 'NONE',  #457 ) ;
+#27 =( CONVERSION_BASED_UNIT ( 'INCH', #283 ) LENGTH_UNIT ( ) NAMED_UNIT ( #261 ) );
+#28 = CIRCLE ( 'NONE', #449, 0.05905511811023613600 ) ;
+#29 = EDGE_CURVE ( 'NONE', #108, #14, #302, .T. ) ;
+#30 = ORIENTED_EDGE ( 'NONE', *, *, #20, .T. ) ;
+#31 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#32 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039373700, -0.4429133858267716400, 0.1771653543307086500 ) ) ;
+#33 = EDGE_LOOP ( 'NONE', ( #315, #267, #356, #436 ) ) ;
+#34 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#35 = EDGE_CURVE ( 'NONE', #368, #118, #199, .T. ) ;
+#36 = ADVANCED_FACE ( 'NONE', ( #210 ), #204, .F. ) ;
+#37 = ORIENTED_EDGE ( 'NONE', *, *, #506, .F. ) ;
+#38 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#39 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#40 = LINE ( 'NONE', #34, #17 ) ;
+#41 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#42 = ORIENTED_EDGE ( 'NONE', *, *, #328, .T. ) ;
+#43 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#44 = PLANE ( 'NONE',  #495 ) ;
+#45 = EDGE_CURVE ( 'NONE', #241, #383, #12, .T. ) ;
+#46 = EDGE_LOOP ( 'NONE', ( #488, #262, #218, #79 ) ) ;
+#47 = ORIENTED_EDGE ( 'NONE', *, *, #317, .T. ) ;
+#48 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#49 = FILL_AREA_STYLE_COLOUR ( '', #50 ) ;
+#50 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#51 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #354 ) ;
+#52 = FACE_OUTER_BOUND ( 'NONE', #23, .T. ) ;
+#53 = EDGE_CURVE ( 'NONE', #178, #241, #377, .T. ) ;
+#54 = AXIS2_PLACEMENT_3D ( 'NONE', #233, #370, #43 ) ;
+#55 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#56 = ORIENTED_EDGE ( 'NONE', *, *, #194, .F. ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#58 = DIRECTION ( 'NONE',  ( -6.938893903907221300E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#59 = EDGE_CURVE ( 'NONE', #108, #128, #279, .T. ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #438, .T. ) ;
+#61 =( CONVERSION_BASED_UNIT ( 'INCH', #431 ) LENGTH_UNIT ( ) NAMED_UNIT ( #152 ) );
+#62 = CIRCLE ( 'NONE', #468, 0.03937007874015751400 ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, 0.3838582677165353100, 0.1771653543307086500 ) ) ;
+#64 = ORIENTED_EDGE ( 'NONE', *, *, #77, .T. ) ;
+#65 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#66 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#67 = EDGE_CURVE ( 'NONE', #25, #321, #185, .T. ) ;
+#68 = ADVANCED_FACE ( 'NONE', ( #88 ), #74, .T. ) ;
+#69 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#70 = LINE ( 'NONE', #159, #344 ) ;
+#71 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#72 = ADVANCED_FACE ( 'NONE', ( #3 ), #347, .T. ) ;
+#73 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #177, 'design' ) ;
+#74 = CYLINDRICAL_SURFACE ( 'NONE', #474, 0.05905511811023613600 ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #438, .F. ) ;
+#76 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#77 = EDGE_CURVE ( 'NONE', #235, #403, #483, .T. ) ;
+#78 = SURFACE_STYLE_USAGE ( .BOTH. , #296 ) ;
+#79 = ORIENTED_EDGE ( 'NONE', *, *, #425, .T. ) ;
+#80 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039373700, 0.4035433070866141800, 0.2165354330708661500 ) ) ;
+#81 = ORIENTED_EDGE ( 'NONE', *, *, #105, .T. ) ;
+#82 = ORIENTED_EDGE ( 'NONE', *, *, #463, .F. ) ;
+#83 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#84 = LINE ( 'NONE', #374, #268 ) ;
+#85 = EDGE_CURVE ( 'NONE', #181, #95, #269, .T. ) ;
+#86 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, 0.3838582677165350300, 0.2165354330708661500 ) ) ;
+#87 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#88 = FACE_OUTER_BOUND ( 'NONE', #33, .T. ) ;
+#89 = EDGE_LOOP ( 'NONE', ( #22, #37, #239, #147 ) ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( -0.9251968503937018100, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#91 = CIRCLE ( 'NONE', #418, 0.05905511811023613600 ) ;
+#92 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039378100, -0.3838582677165354200, 0.2165354330708661500 ) ) ;
+#93 = EDGE_CURVE ( 'NONE', #321, #235, #174, .T. ) ;
+#94 = EDGE_LOOP ( 'NONE', ( #341, #237, #146, #285, #276, #139, #501, #416, #167, #255 ) ) ;
+#95 = VERTEX_POINT ( 'NONE', #173 ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#97 = VECTOR ( 'NONE', #333, 39.37007874015748100 ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039373700, 0.4035433070866141200, 0.1771653543307086500 ) ) ;
+#99 = VECTOR ( 'NONE', #275, 39.37007874015748100 ) ;
+#100 = EDGE_LOOP ( 'NONE', ( #64, #304, #462, #200 ) ) ;
+#101 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1771653543307086500 ) ) ;
+#102 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#103 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#104 = CARTESIAN_POINT ( 'NONE',  ( 0.9251968503937018100, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#105 = EDGE_CURVE ( 'NONE', #241, #368, #361, .T. ) ;
+#106 = CIRCLE ( 'NONE', #428, 0.01968503937007875700 ) ;
+#107 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#108 = VERTEX_POINT ( 'NONE', #393 ) ;
+#109 = CARTESIAN_POINT ( 'NONE',  ( 0.9251968503937018100, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#110 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039373700, 0.4429133858267716400, 0.1771653543307086500 ) ) ;
+#111 = ADVANCED_FACE ( 'NONE', ( #340 ), #469, .T. ) ;
+#112 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#113 = EDGE_CURVE ( 'NONE', #321, #448, #62, .T. ) ;
+#114 = CIRCLE ( 'NONE', #498, 0.05905511811023613600 ) ;
+#115 = ADVANCED_FACE ( 'NONE', ( #164 ), #26, .F. ) ;
+#116 = ORIENTED_EDGE ( 'NONE', *, *, #45, .T. ) ;
+#117 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#118 = VERTEX_POINT ( 'NONE', #281 ) ;
+#119 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#120 = FACE_OUTER_BOUND ( 'NONE', #4, .T. ) ;
+#121 =( CONVERSION_BASED_UNIT ( 'INCH', #220 ) LENGTH_UNIT ( ) NAMED_UNIT ( #325 ) );
+#122 = PLANE ( 'NONE',  #389 ) ;
+#123 = VERTEX_POINT ( 'NONE', #352 ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.2165354330708661500 ) ) ;
+#125 = EDGE_CURVE ( 'NONE', #123, #95, #248, .T. ) ;
+#126 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#127 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#128 = VERTEX_POINT ( 'NONE', #314 ) ;
+#129 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, 0.0000000000000000000, 0.1771653543307086500 ) ) ;
+#130 = EDGE_LOOP ( 'NONE', ( #411, #388, #335, #309 ) ) ;
+#131 = VECTOR ( 'NONE', #180, 39.37007874015748100 ) ;
+#132 = EDGE_CURVE ( 'NONE', #25, #508, #453, .T. ) ;
+#133 = VERTEX_POINT ( 'NONE', #458 ) ;
+#134 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#135 = VERTEX_POINT ( 'NONE', #104 ) ;
+#136 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#137 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ;
+#138 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#139 = ORIENTED_EDGE ( 'NONE', *, *, #417, .T. ) ;
+#140 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#141 = EDGE_CURVE ( 'NONE', #133, #368, #154, .T. ) ;
+#142 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#143 = VECTOR ( 'NONE', #355, 39.37007874015748100 ) ;
+#144 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #142 ) ;
+#145 = EDGE_LOOP ( 'NONE', ( #421, #201, #429, #75 ) ) ;
+#146 = ORIENTED_EDGE ( 'NONE', *, *, #425, .F. ) ;
+#147 = ORIENTED_EDGE ( 'NONE', *, *, #161, .F. ) ;
+#148 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#149 = ADVANCED_FACE ( 'NONE', ( #52 ), #433, .T. ) ;
+#150 = VECTOR ( 'NONE', #338, 39.37007874015748100 ) ;
+#151 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#152 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#153 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#154 = CIRCLE ( 'NONE', #451, 0.05905511811023613600 ) ;
+#155 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#156 = EDGE_CURVE ( 'NONE', #135, #362, #240, .T. ) ;
+#157 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#158 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#159 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, -0.3838582677165350300, 0.2165354330708661500 ) ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #45, .F. ) ;
+#161 = EDGE_CURVE ( 'NONE', #123, #508, #327, .T. ) ;
+#162 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, -0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#163 = FACE_OUTER_BOUND ( 'NONE', #145, .T. ) ;
+#164 = FACE_OUTER_BOUND ( 'NONE', #94, .T. ) ;
+#165 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#166 = ORIENTED_EDGE ( 'NONE', *, *, #113, .T. ) ;
+#167 = ORIENTED_EDGE ( 'NONE', *, *, #214, .T. ) ;
+#168 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#169 = EDGE_CURVE ( 'NONE', #14, #123, #313, .T. ) ;
+#170 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, 0.0000000000000000000, 0.1771653543307086500 ) ) ;
+#171 = ORIENTED_EDGE ( 'NONE', *, *, #502, .F. ) ;
+#172 = CIRCLE ( 'NONE', #382, 0.05905511811023613600 ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.4429133858267716400, 0.1771653543307086500 ) ) ;
+#174 = CIRCLE ( 'NONE', #475, 0.05905511811023627500 ) ;
+#175 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039378100, 0.3838582677165354200, 0.1771653543307086500 ) ) ;
+#176 = ORIENTED_EDGE ( 'NONE', *, *, #59, .F. ) ;
+#177 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#178 = VERTEX_POINT ( 'NONE', #286 ) ;
+#179 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#180 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#181 = VERTEX_POINT ( 'NONE', #32 ) ;
+#182 = CIRCLE ( 'NONE', #381, 0.05905511811023613600 ) ;
+#183 = ADVANCED_FACE ( 'NONE', ( #230 ), #216, .T. ) ;
+#184 = EDGE_CURVE ( 'NONE', #213, #362, #305, .T. ) ;
+#185 = LINE ( 'NONE', #170, #496 ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, 0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #463, .T. ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, 0.3838582677165350300, 0.1771653543307086500 ) ) ;
+#189 = FILL_AREA_STYLE ('',( #470 ) ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, 0.0000000000000000000, 0.1771653543307086500 ) ) ;
+#191 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#192 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#193 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ;
+#194 = EDGE_CURVE ( 'NONE', #383, #8, #28, .T. ) ;
+#195 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#196 = LINE ( 'NONE', #232, #97 ) ;
+#197 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#199 = CIRCLE ( 'NONE', #489, 0.03937007874015748000 ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ;
+#201 = ORIENTED_EDGE ( 'NONE', *, *, #105, .F. ) ;
+#202 = FACE_OUTER_BOUND ( 'NONE', #89, .T. ) ;
+#203 = EDGE_CURVE ( 'NONE', #25, #213, #40, .T. ) ;
+#204 = PLANE ( 'NONE',  #484 ) ;
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ;
+#206 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#207 = EDGE_LOOP ( 'NONE', ( #137, #244, #258, #212, #443, #60, #187, #303 ) ) ;
+#208 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#209 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#210 = FACE_OUTER_BOUND ( 'NONE', #300, .T. ) ;
+#211 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#212 = ORIENTED_EDGE ( 'NONE', *, *, #287, .T. ) ;
+#213 = VERTEX_POINT ( 'NONE', #409 ) ;
+#214 = EDGE_CURVE ( 'NONE', #181, #128, #419, .T. ) ;
+#215 = SURFACE_SIDE_STYLE ('',( #16 ) ) ;
+#216 = CYLINDRICAL_SURFACE ( 'NONE', #435, 0.05905511811023613600 ) ;
+#217 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.4035433070866141200, 0.1771653543307086500 ) ) ;
+#218 = ORIENTED_EDGE ( 'NONE', *, *, #77, .F. ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#220 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #331 );
+#221 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#222 = EDGE_CURVE ( 'NONE', #241, #133, #401, .T. ) ;
+#223 = ORIENTED_EDGE ( 'NONE', *, *, #20, .F. ) ;
+#224 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#225 = ADVANCED_FACE ( 'NONE', ( #120 ), #384, .T. ) ;
+#226 = ORIENTED_EDGE ( 'NONE', *, *, #156, .T. ) ;
+#227 = ORIENTED_EDGE ( 'NONE', *, *, #194, .T. ) ;
+#228 = ORIENTED_EDGE ( 'NONE', *, *, #53, .T. ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039378100, -0.3838582677165354200, 0.1771653543307086500 ) ) ;
+#230 = FACE_OUTER_BOUND ( 'NONE', #497, .T. ) ;
+#231 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.4035433070866141200, 0.2165354330708661500 ) ) ;
+#233 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4035433070866141200, 0.1771653543307086500 ) ) ;
+#234 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Plate_Cover_Right', ( #330, #357 ), #378 ) ;
+#235 = VERTEX_POINT ( 'NONE', #110 ) ;
+#236 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#237 = ORIENTED_EDGE ( 'NONE', *, *, #141, .T. ) ;
+#238 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#239 = ORIENTED_EDGE ( 'NONE', *, *, #132, .T. ) ;
+#240 = LINE ( 'NONE', #109, #143 ) ;
+#241 = VERTEX_POINT ( 'NONE', #186 ) ;
+#242 = ORIENTED_EDGE ( 'NONE', *, *, #67, .T. ) ;
+#243 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#244 = ORIENTED_EDGE ( 'NONE', *, *, #161, .T. ) ;
+#245 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#246 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.4429133858267716400, 0.1771653543307086500 ) ) ;
+#247 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039378100, 0.3838582677165354200, 0.1771653543307086500 ) ) ;
+#248 = CIRCLE ( 'NONE', #460, 0.03937007874015748000 ) ;
+#249 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#250 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#251 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#252 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#253 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#254 = TOROIDAL_SURFACE ( 'NONE', #379, 0.01968503937007863900, 0.03937007874015748000 ) ;
+#255 = ORIENTED_EDGE ( 'NONE', *, *, #507, .F. ) ;
+#256 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#257 = ADVANCED_FACE ( 'NONE', ( #202 ), #6, .T. ) ;
+#258 = ORIENTED_EDGE ( 'NONE', *, *, #502, .T. ) ;
+#259 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#260 = VECTOR ( 'NONE', #209, 39.37007874015748100 ) ;
+#261 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ;
+#263 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#264 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.4429133858267716400, 0.1771653543307086500 ) ) ;
+#265 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #61, 'distance_accuracy_value', 'NONE');
+#266 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, 0.3838582677165353100, 0.2165354330708661500 ) ) ;
+#267 = ORIENTED_EDGE ( 'NONE', *, *, #203, .T. ) ;
+#268 = VECTOR ( 'NONE', #126, 39.37007874015748100 ) ;
+#269 = LINE ( 'NONE', #246, #260 ) ;
+#270 = EDGE_LOOP ( 'NONE', ( #56, #273 ) ) ;
+#271 = FACE_OUTER_BOUND ( 'NONE', #310, .T. ) ;
+#272 = CARTESIAN_POINT ( 'NONE',  ( -0.9251968503937018100, 0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#273 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ;
+#274 = CIRCLE ( 'NONE', #420, 0.03937007874015748000 ) ;
+#275 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#276 = ORIENTED_EDGE ( 'NONE', *, *, #67, .F. ) ;
+#277 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, -0.3838582677165353100, 0.1771653543307086500 ) ) ;
+#278 = FACE_OUTER_BOUND ( 'NONE', #46, .T. ) ;
+#279 = CIRCLE ( 'NONE', #482, 0.03937007874015751400 ) ;
+#280 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#281 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.4035433070866141200, 0.2165354330708661500 ) ) ;
+#282 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#283 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #249 );
+#284 = FACE_OUTER_BOUND ( 'NONE', #445, .T. ) ;
+#285 = ORIENTED_EDGE ( 'NONE', *, *, #93, .F. ) ;
+#286 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#287 = EDGE_CURVE ( 'NONE', #448, #403, #106, .T. ) ;
+#288 = CIRCLE ( 'NONE', #386, 0.05905511811023613600 ) ;
+#289 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#290 = ADVANCED_FACE ( 'NONE', ( #284 ), #369, .T. ) ;
+#291 = VECTOR ( 'NONE', #487, 39.37007874015748100 ) ;
+#292 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, 0.0000000000000000000, 0.1771653543307086500 ) ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ;
+#294 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#295 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#296 = SURFACE_SIDE_STYLE ('',( #439 ) ) ;
+#297 = TOROIDAL_SURFACE ( 'NONE', #413, 0.01968503937007875700, 0.03937007874015748000 ) ;
+#298 = PRODUCT ( 'Trigger_Plate_Cover_Right', 'Trigger_Plate_Cover_Right', '', ( #397 ) ) ;
+#299 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, 0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#300 = EDGE_LOOP ( 'NONE', ( #306, #412 ) ) ;
+#301 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#302 = CIRCLE ( 'NONE', #494, 0.01968503937007875700 ) ;
+#303 = ORIENTED_EDGE ( 'NONE', *, *, #29, .T. ) ;
+#304 = ORIENTED_EDGE ( 'NONE', *, *, #287, .F. ) ;
+#305 = CIRCLE ( 'NONE', #440, 0.05905511811023613600 ) ;
+#306 = ORIENTED_EDGE ( 'NONE', *, *, #317, .F. ) ;
+#307 = ORIENTED_EDGE ( 'NONE', *, *, #507, .T. ) ;
+#308 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -6.938893903907222900E-015, 0.0000000000000000000 ) ) ;
+#309 = ORIENTED_EDGE ( 'NONE', *, *, #29, .F. ) ;
+#310 = EDGE_LOOP ( 'NONE', ( #228, #307, #176, #82 ) ) ;
+#311 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#312 = DIRECTION ( 'NONE',  ( -6.938893903907221300E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#313 = LINE ( 'NONE', #405, #131 ) ;
+#314 = CARTESIAN_POINT ( 'NONE',  ( -1.043307086614174000, -0.3838582677165350300, 0.1771653543307086500 ) ) ;
+#315 = ORIENTED_EDGE ( 'NONE', *, *, #417, .F. ) ;
+#316 = CARTESIAN_POINT ( 'NONE',  ( 1.003937007874016600, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#317 = EDGE_CURVE ( 'NONE', #362, #213, #91, .T. ) ;
+#318 = PRESENTATION_STYLE_ASSIGNMENT (( #78 ) ) ;
+#319 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#320 = ORIENTED_EDGE ( 'NONE', *, *, #454, .F. ) ;
+#321 = VERTEX_POINT ( 'NONE', #188 ) ;
+#322 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#323 = ADVANCED_FACE ( 'NONE', ( #504 ), #297, .T. ) ;
+#324 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#325 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#326 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#327 = CIRCLE ( 'NONE', #446, 0.01968503937007862200 ) ;
+#328 = EDGE_CURVE ( 'NONE', #14, #181, #274, .T. ) ;
+#329 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#330 = MANIFOLD_SOLID_BREP ( 'Fillet1', #19 ) ;
+#331 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#332 = ORIENTED_EDGE ( 'NONE', *, *, #222, .F. ) ;
+#333 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#334 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#335 = ORIENTED_EDGE ( 'NONE', *, *, #328, .F. ) ;
+#336 = ORIENTED_EDGE ( 'NONE', *, *, #506, .T. ) ;
+#337 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#338 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#339 = LINE ( 'NONE', #129, #150 ) ;
+#340 = FACE_OUTER_BOUND ( 'NONE', #100, .T. ) ;
+#341 = ORIENTED_EDGE ( 'NONE', *, *, #222, .T. ) ;
+#342 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#343 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#344 = VECTOR ( 'NONE', #127, 39.37007874015748100 ) ;
+#345 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#346 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#347 = CYLINDRICAL_SURFACE ( 'NONE', #472, 0.05905511811023613600 ) ;
+#348 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#349 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #298 ) ) ;
+#350 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #298, .NOT_KNOWN. ) ;
+#351 = SHAPE_DEFINITION_REPRESENTATION ( #51, #234 ) ;
+#352 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.4035433070866141200, 0.2165354330708661500 ) ) ;
+#353 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#354 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #350, #73 ) ;
+#355 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#356 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ;
+#357 = AXIS2_PLACEMENT_3D ( 'NONE', #198, #103, #348 ) ;
+#358 = CYLINDRICAL_SURFACE ( 'NONE', #54, 0.03937007874015748000 ) ;
+#359 = ADVANCED_FACE ( 'NONE', ( #271 ), #376, .T. ) ;
+#360 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#361 = CIRCLE ( 'NONE', #471, 0.05905511811023613600 ) ;
+#362 = VERTEX_POINT ( 'NONE', #7 ) ;
+#363 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039378100, 0.3838582677165354200, 0.2165354330708661500 ) ) ;
+#364 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#365 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #396 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #27, #282, #65 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#366 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #373 ), #365 ) ;
+#367 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#368 = VERTEX_POINT ( 'NONE', #264 ) ;
+#369 = CYLINDRICAL_SURFACE ( 'NONE', #414, 0.05905511811023613600 ) ;
+#370 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#371 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #373 ) ) ;
+#372 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#373 = STYLED_ITEM ( 'NONE', ( #395 ), #234 ) ;
+#374 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.4429133858267716400, 0.1771653543307086500 ) ) ;
+#375 = ORIENTED_EDGE ( 'NONE', *, *, #132, .F. ) ;
+#376 = CYLINDRICAL_SURFACE ( 'NONE', #391, 0.03937007874015748000 ) ;
+#377 = CIRCLE ( 'NONE', #485, 0.03937007874015748000 ) ;
+#378 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #265 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #61, #311, #102 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#379 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #11, #48 ) ;
+#380 = EDGE_CURVE ( 'NONE', #403, #118, #196, .T. ) ;
+#381 = AXIS2_PLACEMENT_3D ( 'NONE', #481, #238, #13 ) ;
+#382 = AXIS2_PLACEMENT_3D ( 'NONE', #426, #197, #477 ) ;
+#383 = VERTEX_POINT ( 'NONE', #299 ) ;
+#384 = CYLINDRICAL_SURFACE ( 'NONE', #423, 0.03937007874015748000 ) ;
+#385 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#386 = AXIS2_PLACEMENT_3D ( 'NONE', #158, #424, #195 ) ;
+#387 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#388 = ORIENTED_EDGE ( 'NONE', *, *, #214, .F. ) ;
+#389 = AXIS2_PLACEMENT_3D ( 'NONE', #422, #192, #473 ) ;
+#390 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#391 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #155, #231 ) ;
+#392 = LINE ( 'NONE', #90, #291 ) ;
+#393 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, -0.3838582677165353100, 0.2165354330708661500 ) ) ;
+#394 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#395 = PRESENTATION_STYLE_ASSIGNMENT (( #499 ) ) ;
+#396 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #27, 'distance_accuracy_value', 'NONE');
+#397 = PRODUCT_CONTEXT ( 'NONE', #142, 'mechanical' ) ;
+#398 = AXIS2_PLACEMENT_3D ( 'NONE', #301, #83, #337 ) ;
+#399 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #500 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #121, #367, #157 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#400 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.4035433070866141200, 0.1771653543307086500 ) ) ;
+#401 = CIRCLE ( 'NONE', #432, 0.05905511811023613600 ) ;
+#402 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #407 ), #399 ) ;
+#403 = VERTEX_POINT ( 'NONE', #80 ) ;
+#404 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #407 ) ) ;
+#405 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.4035433070866141200, 0.2165354330708661500 ) ) ;
+#406 = ADVANCED_FACE ( 'NONE', ( #510 ), #122, .F. ) ;
+#407 = STYLED_ITEM ( 'NONE', ( #318 ), #330 ) ;
+#408 = FACE_OUTER_BOUND ( 'NONE', #207, .T. ) ;
+#409 = CARTESIAN_POINT ( 'NONE',  ( 1.043307086614174000, -0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#410 = ADVANCED_FACE ( 'NONE', ( #278 ), #358, .T. ) ;
+#411 = ORIENTED_EDGE ( 'NONE', *, *, #59, .T. ) ;
+#412 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ;
+#413 = AXIS2_PLACEMENT_3D ( 'NONE', #229, #39, #364 ) ;
+#414 = AXIS2_PLACEMENT_3D ( 'NONE', #119, #326, #294 ) ;
+#415 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#416 = ORIENTED_EDGE ( 'NONE', *, *, #85, .F. ) ;
+#417 = EDGE_CURVE ( 'NONE', #25, #135, #288, .T. ) ;
+#418 = AXIS2_PLACEMENT_3D ( 'NONE', #295, #76, #329 ) ;
+#419 = CIRCLE ( 'NONE', #434, 0.05905511811023627500 ) ;
+#420 = AXIS2_PLACEMENT_3D ( 'NONE', #5, #263, #41 ) ;
+#421 = ORIENTED_EDGE ( 'NONE', *, *, #35, .F. ) ;
+#422 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.3838582677165355300, 0.0000000000000000000 ) ) ;
+#423 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #148, #71 ) ;
+#424 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#425 = EDGE_CURVE ( 'NONE', #235, #368, #84, .T. ) ;
+#426 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#427 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -6.938893903907222900E-015, 0.0000000000000000000 ) ) ;
+#428 = AXIS2_PLACEMENT_3D ( 'NONE', #363, #153, #415 ) ;
+#429 = ORIENTED_EDGE ( 'NONE', *, *, #53, .F. ) ;
+#430 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #467, #259 ) ;
+#431 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #87 );
+#432 = AXIS2_PLACEMENT_3D ( 'NONE', #324, #117, #360 ) ;
+#433 = CYLINDRICAL_SURFACE ( 'NONE', #442, 0.03937007874015748000 ) ;
+#434 = AXIS2_PLACEMENT_3D ( 'NONE', #2, #256, #38 ) ;
+#435 = AXIS2_PLACEMENT_3D ( 'NONE', #252, #31, #319 ) ;
+#436 = ORIENTED_EDGE ( 'NONE', *, *, #156, .F. ) ;
+#437 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#438 = EDGE_CURVE ( 'NONE', #118, #178, #493, .T. ) ;
+#439 = SURFACE_STYLE_FILL_AREA ( #189 ) ;
+#440 = AXIS2_PLACEMENT_3D ( 'NONE', #224, #511, #253 ) ;
+#441 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039379200, 0.4035433070866141200, 0.1771653543307086500 ) ) ;
+#442 = AXIS2_PLACEMENT_3D ( 'NONE', #400, #459, #179 ) ;
+#443 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ;
+#444 = CARTESIAN_POINT ( 'NONE',  ( -1.003937007874016600, 0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#445 = EDGE_LOOP ( 'NONE', ( #15, #30, #193, #160, #81 ) ) ;
+#446 = AXIS2_PLACEMENT_3D ( 'NONE', #461, #221, #509 ) ;
+#447 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#448 = VERTEX_POINT ( 'NONE', #266 ) ;
+#449 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #322, #112 ) ;
+#450 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#451 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #505, #251 ) ;
+#452 = FILL_AREA_STYLE ('',( #49 ) ) ;
+#453 = CIRCLE ( 'NONE', #456, 0.03937007874015748000 ) ;
+#454 = EDGE_CURVE ( 'NONE', #135, #95, #172, .T. ) ;
+#455 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #177 ) ;
+#456 = AXIS2_PLACEMENT_3D ( 'NONE', #316, #107, #353 ) ;
+#457 = AXIS2_PLACEMENT_3D ( 'NONE', #101, #372, #66 ) ;
+#458 = CARTESIAN_POINT ( 'NONE',  ( -0.9251968503937018100, 0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#459 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#460 = AXIS2_PLACEMENT_3D ( 'NONE', #217, #503, #250 ) ;
+#461 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.2165354330708661500 ) ) ;
+#462 = ORIENTED_EDGE ( 'NONE', *, *, #113, .F. ) ;
+#463 = EDGE_CURVE ( 'NONE', #178, #108, #70, .T. ) ;
+#464 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #211, #450 ) ;
+#465 = VECTOR ( 'NONE', #476, 39.37007874015748100 ) ;
+#466 = ADVANCED_FACE ( 'NONE', ( #163 ), #254, .T. ) ;
+#467 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#468 = AXIS2_PLACEMENT_3D ( 'NONE', #63, #312, #427 ) ;
+#469 = TOROIDAL_SURFACE ( 'NONE', #464, 0.01968503937007875700, 0.03937007874015748000 ) ;
+#470 = FILL_AREA_STYLE_COLOUR ( '', #191 ) ;
+#471 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #140, #394 ) ;
+#472 = AXIS2_PLACEMENT_3D ( 'NONE', #390, #447, #343 ) ;
+#473 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#474 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #136, #387 ) ;
+#475 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #24, #280 ) ;
+#476 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#477 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#478 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #345, #138 ) ;
+#479 = LINE ( 'NONE', #86, #465 ) ;
+#480 = ORIENTED_EDGE ( 'NONE', *, *, #85, .T. ) ;
+#481 = CARTESIAN_POINT ( 'NONE',  ( 0.9842519685039379200, -0.3838582677165355300, 0.1771653543307086500 ) ) ;
+#482 = AXIS2_PLACEMENT_3D ( 'NONE', #277, #58, #308 ) ;
+#483 = CIRCLE ( 'NONE', #478, 0.03937007874015748000 ) ;
+#484 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #243, #21 ) ;
+#485 = AXIS2_PLACEMENT_3D ( 'NONE', #444, #208, #492 ) ;
+#486 = CARTESIAN_POINT ( 'NONE',  ( -0.9842519685039373700, -0.4035433070866141800, 0.2165354330708661500 ) ) ;
+#487 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#488 = ORIENTED_EDGE ( 'NONE', *, *, #35, .T. ) ;
+#489 = AXIS2_PLACEMENT_3D ( 'NONE', #441, #206, #490 ) ;
+#490 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#491 = EDGE_LOOP ( 'NONE', ( #223, #332, #116, #227 ) ) ;
+#492 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#493 = CIRCLE ( 'NONE', #398, 0.01968503937007862200 ) ;
+#494 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #342, #134 ) ;
+#495 = AXIS2_PLACEMENT_3D ( 'NONE', #124, #334, #18 ) ;
+#496 = VECTOR ( 'NONE', #245, 39.37007874015748100 ) ;
+#497 = EDGE_LOOP ( 'NONE', ( #9, #336, #320, #226, #47 ) ) ;
+#498 = AXIS2_PLACEMENT_3D ( 'NONE', #385, #165, #437 ) ;
+#499 = SURFACE_STYLE_USAGE ( .BOTH. , #215 ) ;
+#500 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #121, 'distance_accuracy_value', 'NONE');
+#501 = ORIENTED_EDGE ( 'NONE', *, *, #454, .T. ) ;
+#502 = EDGE_CURVE ( 'NONE', #508, #448, #479, .T. ) ;
+#503 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#504 = FACE_OUTER_BOUND ( 'NONE', #130, .T. ) ;
+#505 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#506 = EDGE_CURVE ( 'NONE', #25, #95, #182, .T. ) ;
+#507 = EDGE_CURVE ( 'NONE', #241, #128, #339, .T. ) ;
+#508 = VERTEX_POINT ( 'NONE', #162 ) ;
+#509 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#510 = FACE_OUTER_BOUND ( 'NONE', #270, .T. ) ;
+#511 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Trigger_Rod_Left_2.step

@@ -0,0 +1,838 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trigger_Rod_Left_2.step',
+    '2014-05-14T06:09:42',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = ORIENTED_EDGE ( 'NONE', *, *, #496, .F. ) ;
+#2 = VECTOR ( 'NONE', #645, 39.37007874015748100 ) ;
+#3 = VERTEX_POINT ( 'NONE', #51 ) ;
+#4 = SURFACE_STYLE_FILL_AREA ( #103 ) ;
+#5 = LINE ( 'NONE', #793, #539 ) ;
+#6 = CARTESIAN_POINT ( 'NONE',  ( -1.289190551993207300E-016, -0.4719115247199384700, -2.795275590551181500 ) ) ;
+#7 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #296, 'distance_accuracy_value', 'NONE');
+#8 = LINE ( 'NONE', #614, #318 ) ;
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #541, .T. ) ;
+#10 = LINE ( 'NONE', #487, #320 ) ;
+#11 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#12 = VERTEX_POINT ( 'NONE', #771 ) ;
+#13 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#14 = ORIENTED_EDGE ( 'NONE', *, *, #524, .T. ) ;
+#15 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.5506516822002542900, -2.755905511811024100 ) ) ;
+#16 = ORIENTED_EDGE ( 'NONE', *, *, #529, .F. ) ;
+#17 = CYLINDRICAL_SURFACE ( 'NONE', #173, 0.07874015748031502900 ) ;
+#18 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -1.206969255606346500E-016 ) ) ;
+#19 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#20 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.4719115247199391300, -2.795275590551181500 ) ) ;
+#21 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#22 = VERTEX_POINT ( 'NONE', #71 ) ;
+#23 = ORIENTED_EDGE ( 'NONE', *, *, #378, .F. ) ;
+#24 = FACE_OUTER_BOUND ( 'NONE', #192, .T. ) ;
+#25 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#26 = LINE ( 'NONE', #388, #180 ) ;
+#27 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#28 = VECTOR ( 'NONE', #331, 39.37007874015748100 ) ;
+#29 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 2.312964634635740700E-015, -1.000000000000000000 ) ) ;
+#30 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#31 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#32 = VERTEX_POINT ( 'NONE', #552 ) ;
+#33 = CARTESIAN_POINT ( 'NONE',  ( 2.632984869330313400E-019, -0.6097068003104905200, -2.850953289857208500 ) ) ;
+#34 = ORIENTED_EDGE ( 'NONE', *, *, #483, .F. ) ;
+#35 = FACE_OUTER_BOUND ( 'NONE', #309, .T. ) ;
+#36 = PLANE ( 'NONE',  #150 ) ;
+#37 = ORIENTED_EDGE ( 'NONE', *, *, #616, .T. ) ;
+#38 = ADVANCED_FACE ( 'NONE', ( #564 ), #707, .F. ) ;
+#39 = PLANE ( 'NONE',  #126 ) ;
+#40 = VERTEX_POINT ( 'NONE', #680 ) ;
+#41 = ORIENTED_EDGE ( 'NONE', *, *, #609, .F. ) ;
+#42 = ORIENTED_EDGE ( 'NONE', *, *, #563, .T. ) ;
+#43 = FACE_OUTER_BOUND ( 'NONE', #428, .T. ) ;
+#44 = LINE ( 'NONE', #211, #726 ) ;
+#45 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#46 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894301300, -4.503561703872210400E-015, -2.755905511811024100 ) ) ;
+#47 = LINE ( 'NONE', #685, #60 ) ;
+#48 = ORIENTED_EDGE ( 'NONE', *, *, #445, .F. ) ;
+#49 = DIRECTION ( 'NONE',  ( -3.469446951953614200E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#50 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.4613623439155638000, -2.716535433070866600 ) ) ;
+#51 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.4719115247199391300, -2.952755905511811600 ) ) ;
+#52 = ORIENTED_EDGE ( 'NONE', *, *, #385, .F. ) ;
+#53 = FACE_OUTER_BOUND ( 'NONE', #362, .T. ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #464, .F. ) ;
+#55 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3931713672396237000, -2.854330708661417600 ) ) ;
+#56 = ORIENTED_EDGE ( 'NONE', *, *, #496, .T. ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#58 = ORIENTED_EDGE ( 'NONE', *, *, #513, .T. ) ;
+#59 = LINE ( 'NONE', #55, #742 ) ;
+#60 = VECTOR ( 'NONE', #738, 39.37007874015748100 ) ;
+#61 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.4824607055243142500, -2.716535433070866600 ) ) ;
+#62 = VECTOR ( 'NONE', #154, 39.37007874015748100 ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #394, .F. ) ;
+#64 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.6097068003104905200, -2.850953289857208500 ) ) ;
+#66 = CYLINDRICAL_SURFACE ( 'NONE', #213, 0.05905511811023627500 ) ;
+#67 = VERTEX_POINT ( 'NONE', #480 ) ;
+#68 = VERTEX_POINT ( 'NONE', #206 ) ;
+#69 = VECTOR ( 'NONE', #342, 39.37007874015748100 ) ;
+#70 = AXIS2_PLACEMENT_3D ( 'NONE', #749, #647, #697 ) ;
+#71 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3931713672396237000, -2.857708127465627500 ) ) ;
+#72 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, -2.775590551181102800 ) ) ;
+#74 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#75 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5506516822002542900, -2.854330708661417600 ) ) ;
+#76 = VERTEX_POINT ( 'NONE', #784 ) ;
+#77 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4719115247199389700, -2.512633316146487800 ) ) ;
+#78 = ORIENTED_EDGE ( 'NONE', *, *, #548, .F. ) ;
+#79 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#80 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.4824607055243142500, -2.795275590551181500 ) ) ;
+#81 = ORIENTED_EDGE ( 'NONE', *, *, #343, .T. ) ;
+#82 = FACE_OUTER_BOUND ( 'NONE', #259, .T. ) ;
+#83 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3734863278695450000, -2.775590551181102800 ) ) ;
+#84 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3931713672396237000, -2.854330708661417600 ) ) ;
+#85 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.312964634635737100E-015, 0.0000000000000000000 ) ) ;
+#86 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#87 = VECTOR ( 'NONE', #481, 39.37007874015748100 ) ;
+#88 = ORIENTED_EDGE ( 'NONE', *, *, #604, .T. ) ;
+#89 = VECTOR ( 'NONE', #217, 39.37007874015748100 ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5506516822002542900, -2.850953289857208500 ) ) ;
+#91 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #335 ) ) ;
+#92 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.512633316146487800 ) ) ;
+#93 = ORIENTED_EDGE ( 'NONE', *, *, #504, .F. ) ;
+#94 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #335, .NOT_KNOWN. ) ;
+#95 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#96 = ADVANCED_FACE ( 'NONE', ( #24 ), #404, .F. ) ;
+#97 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #94, #196 ) ;
+#98 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#99 = VERTEX_POINT ( 'NONE', #329 ) ;
+#100 = LINE ( 'NONE', #769, #260 ) ;
+#101 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#102 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #369, #810 ) ;
+#103 = FILL_AREA_STYLE ('',( #588 ) ) ;
+#104 = VERTEX_POINT ( 'NONE', #139 ) ;
+#105 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#106 = AXIS2_PLACEMENT_3D ( 'NONE', #160, #31, #286 ) ;
+#107 = LINE ( 'NONE', #783, #646 ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #492, .F. ) ;
+#109 = ORIENTED_EDGE ( 'NONE', *, *, #378, .T. ) ;
+#110 = LINE ( 'NONE', #493, #89 ) ;
+#111 = EDGE_LOOP ( 'NONE', ( #78, #661, #694, #247 ) ) ;
+#112 = DIRECTION ( 'NONE',  ( -2.312964634635737100E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#113 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #398 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #243, #708, #299 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#114 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -8.673617379884028600E-016, -1.000000000000000000 ) ) ;
+#115 = ORIENTED_EDGE ( 'NONE', *, *, #357, .F. ) ;
+#116 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#117 = ORIENTED_EDGE ( 'NONE', *, *, #436, .T. ) ;
+#118 = LINE ( 'NONE', #377, #790 ) ;
+#119 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #122 ), #113 ) ;
+#120 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #122 ) ) ;
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #615, .T. ) ;
+#122 = STYLED_ITEM ( 'NONE', ( #665 ), #161 ) ;
+#123 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5900217609404117000, -2.913385826771654600 ) ) ;
+#124 = ORIENTED_EDGE ( 'NONE', *, *, #361, .F. ) ;
+#125 = DIRECTION ( 'NONE',  ( -3.469446951953614200E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#126 = AXIS2_PLACEMENT_3D ( 'NONE', #806, #95, #98 ) ;
+#127 = FACE_OUTER_BOUND ( 'NONE', #583, .T. ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ;
+#129 = VECTOR ( 'NONE', #409, 39.37007874015748100 ) ;
+#130 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#131 = VERTEX_POINT ( 'NONE', #682 ) ;
+#132 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 9.251858538542973800E-015 ) ) ;
+#133 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #7 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #296, #759, #367 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#134 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3341162491293874800, -2.850953289857208500 ) ) ;
+#135 = VERTEX_POINT ( 'NONE', #557 ) ;
+#136 = EDGE_LOOP ( 'NONE', ( #181, #250, #538, #323 ) ) ;
+#137 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#138 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, -2.857708127465628000 ) ) ;
+#139 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3538012884994662400, -2.795275590551182400 ) ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3931713672396237000, -2.857708127465626200 ) ) ;
+#141 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#142 = EDGE_LOOP ( 'NONE', ( #383, #382, #804, #23, #608, #52, #607, #63, #648, #785, #578 ) ) ;
+#143 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #514 );
+#144 = CIRCLE ( 'NONE', #271, 0.07874015748031496000 ) ;
+#145 = AXIS2_PLACEMENT_3D ( 'NONE', #291, #758, #363 ) ;
+#146 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3538012884994662400, -2.795275590551181900 ) ) ;
+#147 = DIRECTION ( 'NONE',  ( -2.312964634635737100E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#148 = ORIENTED_EDGE ( 'NONE', *, *, #412, .F. ) ;
+#149 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#150 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #360, #172 ) ;
+#151 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#152 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4719115247199389700, -2.512633316146487800 ) ) ;
+#153 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#155 = LINE ( 'NONE', #392, #673 ) ;
+#156 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#157 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ;
+#158 = LINE ( 'NONE', #75, #662 ) ;
+#159 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#160 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.4719115247199391300, -2.512633316146487800 ) ) ;
+#161 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Rod_Left_2', ( #355, #102 ), #133 ) ;
+#162 = AXIS2_PLACEMENT_3D ( 'NONE', #505, #86, #579 ) ;
+#163 = VERTEX_POINT ( 'NONE', #631 ) ;
+#164 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#165 = ORIENTED_EDGE ( 'NONE', *, *, #565, .F. ) ;
+#166 = VERTEX_POINT ( 'NONE', #210 ) ;
+#167 = AXIS2_PLACEMENT_3D ( 'NONE', #585, #803, #437 ) ;
+#168 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#169 = ORIENTED_EDGE ( 'NONE', *, *, #506, .T. ) ;
+#170 = LINE ( 'NONE', #577, #2 ) ;
+#171 = ADVANCED_FACE ( 'NONE', ( #193 ), #267, .F. ) ;
+#172 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.731847993664263200E-016, 0.0000000000000000000 ) ) ;
+#173 = AXIS2_PLACEMENT_3D ( 'NONE', #651, #701, #168 ) ;
+#174 = AXIS2_PLACEMENT_3D ( 'NONE', #33, #288, #699 ) ;
+#175 = ORIENTED_EDGE ( 'NONE', *, *, #610, .F. ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#177 = FACE_OUTER_BOUND ( 'NONE', #800, .T. ) ;
+#178 = SURFACE_STYLE_USAGE ( .BOTH. , #590 ) ;
+#179 = AXIS2_PLACEMENT_3D ( 'NONE', #356, #801, #435 ) ;
+#180 = VECTOR ( 'NONE', #776, 39.37007874015748100 ) ;
+#181 = ORIENTED_EDGE ( 'NONE', *, *, #497, .F. ) ;
+#182 = LINE ( 'NONE', #73, #816 ) ;
+#183 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#184 = VERTEX_POINT ( 'NONE', #560 ) ;
+#185 = AXIS2_PLACEMENT_3D ( 'NONE', #799, #581, #164 ) ;
+#186 = CLOSED_SHELL ( 'NONE', ( #777, #295, #96, #245, #658, #705, #373, #38, #515, #447, #813, #710, #653, #712, #762, #764, #433, #756, #439, #171, #754, #700, #809, #451 ) ) ;
+#187 = FACE_OUTER_BOUND ( 'NONE', #678, .T. ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5703367215703329900, -2.775590551181102800 ) ) ;
+#189 = AXIS2_PLACEMENT_3D ( 'NONE', #644, #85, #748 ) ;
+#190 = ORIENTED_EDGE ( 'NONE', *, *, #549, .T. ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#192 = EDGE_LOOP ( 'NONE', ( #157, #760, #235, #788, #667, #535, #411, #582, #407, #48, #456 ) ) ;
+#193 = FACE_OUTER_BOUND ( 'NONE', #797, .T. ) ;
+#194 = DIRECTION ( 'NONE',  ( 2.312964634635737100E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#195 = AXIS2_PLACEMENT_3D ( 'NONE', #499, #576, #156 ) ;
+#196 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #45, 'design' ) ;
+#197 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5900217609404117000, -2.775590551181102800 ) ) ;
+#198 = VECTOR ( 'NONE', #611, 39.37007874015748100 ) ;
+#199 = LINE ( 'NONE', #269, #28 ) ;
+#200 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5506516822002542900, -2.850953289857208500 ) ) ;
+#201 = EDGE_LOOP ( 'NONE', ( #737, #752, #109, #587 ) ) ;
+#202 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#203 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.3931713672396239800, -2.755905511811024100 ) ) ;
+#204 = AXIS2_PLACEMENT_3D ( 'NONE', #795, #421, #29 ) ;
+#205 = AXIS2_PLACEMENT_3D ( 'NONE', #572, #153, #643 ) ;
+#206 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#207 = VERTEX_POINT ( 'NONE', #488 ) ;
+#208 = CYLINDRICAL_SURFACE ( 'NONE', #70, 0.01968503937007875700 ) ;
+#209 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3341162491293874800, -2.857708127465626200 ) ) ;
+#210 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4719115247199389700, -2.795275590551181500 ) ) ;
+#211 = CARTESIAN_POINT ( 'NONE',  ( -4.730269911220782200, -0.3538012884994662400, -2.775590551181102800 ) ) ;
+#212 = VERTEX_POINT ( 'NONE', #787 ) ;
+#213 = AXIS2_PLACEMENT_3D ( 'NONE', #209, #137, #72 ) ;
+#214 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.4719115247199391300, -2.512633316146487800 ) ) ;
+#215 = ORIENTED_EDGE ( 'NONE', *, *, #598, .F. ) ;
+#216 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5506516822002542900, -2.755905511811024100 ) ) ;
+#217 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#218 = AXIS2_PLACEMENT_3D ( 'NONE', #339, #792, #414 ) ;
+#219 = VECTOR ( 'NONE', #537, 39.37007874015748100 ) ;
+#220 = AXIS2_PLACEMENT_3D ( 'NONE', #83, #568, #149 ) ;
+#221 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894301300, -4.503561703872210400E-015, -2.952755905511811600 ) ) ;
+#222 = LINE ( 'NONE', #326, #372 ) ;
+#223 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#224 = AXIS2_PLACEMENT_3D ( 'NONE', #677, #266, #730 ) ;
+#225 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3538012884994662400, -2.775590551181102800 ) ) ;
+#226 = AXIS2_PLACEMENT_3D ( 'NONE', #65, #551, #132 ) ;
+#227 = VECTOR ( 'NONE', #280, 39.37007874015748100 ) ;
+#228 = VERTEX_POINT ( 'NONE', #334 ) ;
+#229 = PLANE ( 'NONE',  #106 ) ;
+#230 = VECTOR ( 'NONE', #633, 39.37007874015748100 ) ;
+#231 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.795275590551181500 ) ) ;
+#232 = AXIS2_PLACEMENT_3D ( 'NONE', #547, #130, #621 ) ;
+#233 = EDGE_LOOP ( 'NONE', ( #54, #462, #489, #561, #812, #34, #56, #454, #264, #461, #508 ) ) ;
+#234 = FACE_OUTER_BOUND ( 'NONE', #136, .T. ) ;
+#235 = ORIENTED_EDGE ( 'NONE', *, *, #412, .T. ) ;
+#236 = AXIS2_PLACEMENT_3D ( 'NONE', #321, #779, #393 ) ;
+#237 = PLANE ( 'NONE',  #145 ) ;
+#238 = ORIENTED_EDGE ( 'NONE', *, *, #352, .F. ) ;
+#239 = AXIS2_PLACEMENT_3D ( 'NONE', #387, #261, #723 ) ;
+#240 = ORIENTED_EDGE ( 'NONE', *, *, #350, .F. ) ;
+#241 = FACE_OUTER_BOUND ( 'NONE', #720, .T. ) ;
+#242 = AXIS2_PLACEMENT_3D ( 'NONE', #61, #546, #125 ) ;
+#243 =( CONVERSION_BASED_UNIT ( 'INCH', #460 ) LENGTH_UNIT ( ) NAMED_UNIT ( #807 ) );
+#244 = AXIS2_PLACEMENT_3D ( 'NONE', #191, #314, #773 ) ;
+#245 = ADVANCED_FACE ( 'NONE', ( #177 ), #635, .T. ) ;
+#246 = LINE ( 'NONE', #152, #62 ) ;
+#247 = ORIENTED_EDGE ( 'NONE', *, *, #434, .F. ) ;
+#248 = VECTOR ( 'NONE', #405, 39.37007874015748100 ) ;
+#249 = ORIENTED_EDGE ( 'NONE', *, *, #467, .T. ) ;
+#250 = ORIENTED_EDGE ( 'NONE', *, *, #571, .T. ) ;
+#251 = FACE_OUTER_BOUND ( 'NONE', #338, .T. ) ;
+#252 = AXIS2_PLACEMENT_3D ( 'NONE', #188, #821, #605 ) ;
+#253 = AXIS2_PLACEMENT_3D ( 'NONE', #254, #715, #664 ) ;
+#254 = CARTESIAN_POINT ( 'NONE',  ( -1.179974529415955400E-017, -0.6097068003104905200, -2.857708127465627500 ) ) ;
+#255 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3341162491293874800, -2.850953289857209900 ) ) ;
+#256 = EDGE_LOOP ( 'NONE', ( #284, #169, #501, #148, #240, #475, #465, #249 ) ) ;
+#257 = AXIS2_PLACEMENT_3D ( 'NONE', #255, #717, #311 ) ;
+#258 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#259 = EDGE_LOOP ( 'NONE', ( #430, #42, #366, #297 ) ) ;
+#260 = VECTOR ( 'NONE', #819, 39.37007874015748100 ) ;
+#261 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#262 = AXIS2_PLACEMENT_3D ( 'NONE', #50, #527, #114 ) ;
+#263 = LINE ( 'NONE', #203, #87 ) ;
+#264 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ;
+#265 = CIRCLE ( 'NONE', #205, 0.05905511811023627500 ) ;
+#266 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#267 = PLANE ( 'NONE',  #317 ) ;
+#268 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -1.206969255606346500E-016 ) ) ;
+#269 = CARTESIAN_POINT ( 'NONE',  ( -4.887614533388943000E-018, -0.5900217609404117000, -2.913385826771654600 ) ) ;
+#270 = ORIENTED_EDGE ( 'NONE', *, *, #554, .T. ) ;
+#271 = AXIS2_PLACEMENT_3D ( 'NONE', #817, #455, #49 ) ;
+#272 = AXIS2_PLACEMENT_3D ( 'NONE', #597, #183, #660 ) ;
+#273 = DIRECTION ( 'NONE',  ( -2.731847993664263200E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#274 = VERTEX_POINT ( 'NONE', #791 ) ;
+#275 = VECTOR ( 'NONE', #525, 39.37007874015748100 ) ;
+#276 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, 0.0000000000000000000, -2.952755905511811600 ) ) ;
+#277 = AXIS2_PLACEMENT_3D ( 'NONE', #693, #424, #223 ) ;
+#278 = AXIS2_PLACEMENT_3D ( 'NONE', #620, #202, #105 ) ;
+#279 = FILL_AREA_STYLE ('',( #690 ) ) ;
+#280 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#281 = AXIS2_PLACEMENT_3D ( 'NONE', #763, #374, #814 ) ;
+#282 = VECTOR ( 'NONE', #322, 39.37007874015748100 ) ;
+#283 = VERTEX_POINT ( 'NONE', #146 ) ;
+#284 = ORIENTED_EDGE ( 'NONE', *, *, #452, .T. ) ;
+#285 = VECTOR ( 'NONE', #636, 39.37007874015748100 ) ;
+#286 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#287 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #778 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #420, #27, #498 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#288 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 2.586362690585028100E-018 ) ) ;
+#289 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #305 ), #287 ) ;
+#290 = VERTEX_POINT ( 'NONE', #413 ) ;
+#291 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#292 = AXIS2_PLACEMENT_3D ( 'NONE', #669, #258, #719 ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #610, .T. ) ;
+#294 = LINE ( 'NONE', #600, #805 ) ;
+#295 = ADVANCED_FACE ( 'NONE', ( #340 ), #337, .F. ) ;
+#296 =( CONVERSION_BASED_UNIT ( 'INCH', #143 ) LENGTH_UNIT ( ) NAMED_UNIT ( #101 ) );
+#297 = ORIENTED_EDGE ( 'NONE', *, *, #565, .T. ) ;
+#298 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #305 ) ) ;
+#299 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#300 = LINE ( 'NONE', #617, #796 ) ;
+#301 = AXIS2_PLACEMENT_3D ( 'NONE', #77, #566, #147 ) ;
+#302 = ORIENTED_EDGE ( 'NONE', *, *, #536, .T. ) ;
+#303 = ORIENTED_EDGE ( 'NONE', *, *, #418, .T. ) ;
+#304 = CIRCLE ( 'NONE', #220, 0.01968503937007875700 ) ;
+#305 = STYLED_ITEM ( 'NONE', ( #316 ), #355 ) ;
+#306 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#307 = VERTEX_POINT ( 'NONE', #80 ) ;
+#308 = AXIS2_PLACEMENT_3D ( 'NONE', #214, #273, #740 ) ;
+#309 = EDGE_LOOP ( 'NONE', ( #376, #190, #767, #479 ) ) ;
+#310 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3538012884994662400, -2.913385826771655000 ) ) ;
+#311 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 2.312964634635740700E-015, -1.000000000000000000 ) ) ;
+#312 = VERTEX_POINT ( 'NONE', #639 ) ;
+#313 = VECTOR ( 'NONE', #30, 39.37007874015748100 ) ;
+#314 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#315 = ORIENTED_EDGE ( 'NONE', *, *, #450, .T. ) ;
+#316 = PRESENTATION_STYLE_ASSIGNMENT (( #344 ) ) ;
+#317 = AXIS2_PLACEMENT_3D ( 'NONE', #736, #406, #19 ) ;
+#318 = VECTOR ( 'NONE', #672, 39.37007874015748100 ) ;
+#319 = VERTEX_POINT ( 'NONE', #216 ) ;
+#320 = VECTOR ( 'NONE', #559, 39.37007874015748100 ) ;
+#321 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5703367215703329900, -2.775590551181102800 ) ) ;
+#322 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#323 = ORIENTED_EDGE ( 'NONE', *, *, #574, .T. ) ;
+#324 = ORIENTED_EDGE ( 'NONE', *, *, #524, .F. ) ;
+#325 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3734863278695450000, -2.755905511811024100 ) ) ;
+#326 = CARTESIAN_POINT ( 'NONE',  ( -4.366958406048768300, -0.4824607055243142500, -2.795275590551181500 ) ) ;
+#327 = AXIS2_PLACEMENT_3D ( 'NONE', #733, #486, #74 ) ;
+#328 = AXIS2_PLACEMENT_3D ( 'NONE', #134, #628, #13 ) ;
+#329 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5506516822002542900, -2.857708127465627500 ) ) ;
+#330 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3538012884994662400, -2.795275590551181500 ) ) ;
+#331 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#332 = VERTEX_POINT ( 'NONE', #688 ) ;
+#333 = LINE ( 'NONE', #46, #668 ) ;
+#334 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3931713672396237000, -2.850953289857209900 ) ) ;
+#335 = PRODUCT ( 'Trigger_Rod_Left_2', 'Trigger_Rod_Left_2', '', ( #446 ) ) ;
+#336 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#337 = PLANE ( 'NONE',  #301 ) ;
+#338 = EDGE_LOOP ( 'NONE', ( #108, #729, #714, #619 ) ) ;
+#339 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.6097068003104905200, -2.857708127465627500 ) ) ;
+#340 = FACE_OUTER_BOUND ( 'NONE', #142, .T. ) ;
+#341 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.731847993664263200E-016, 0.0000000000000000000 ) ) ;
+#342 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#343 = EDGE_CURVE ( 'NONE', #555, #290, #689, .T. ) ;
+#344 = SURFACE_STYLE_USAGE ( .BOTH. , #744 ) ;
+#345 = LINE ( 'NONE', #540, #692 ) ;
+#346 = ORIENTED_EDGE ( 'NONE', *, *, #616, .F. ) ;
+#347 = PLANE ( 'NONE',  #195 ) ;
+#348 = ORIENTED_EDGE ( 'NONE', *, *, #483, .T. ) ;
+#349 = VECTOR ( 'NONE', #681, 39.37007874015748100 ) ;
+#350 = EDGE_CURVE ( 'NONE', #166, #555, #5, .T. ) ;
+#351 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.5506516822002542900, -2.755905511811024100 ) ) ;
+#352 = EDGE_CURVE ( 'NONE', #290, #511, #365, .T. ) ;
+#353 = ORIENTED_EDGE ( 'NONE', *, *, #541, .F. ) ;
+#354 = ORIENTED_EDGE ( 'NONE', *, *, #615, .F. ) ;
+#355 = MANIFOLD_SOLID_BREP ( 'Stock-Trigger Plate_1_2-1', #186 ) ;
+#356 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.755905511811024100 ) ) ;
+#357 = EDGE_CURVE ( 'NONE', #166, #511, #246, .T. ) ;
+#358 = ORIENTED_EDGE ( 'NONE', *, *, #599, .T. ) ;
+#359 = CYLINDRICAL_SURFACE ( 'NONE', #174, 0.05905511811023627500 ) ;
+#360 = DIRECTION ( 'NONE',  ( -2.731847993664263200E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#361 = EDGE_CURVE ( 'NONE', #511, #312, #618, .T. ) ;
+#362 = EDGE_LOOP ( 'NONE', ( #502, #415, #37, #354, #293, #469, #674, #716, #739, #623, #88 ) ) ;
+#363 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#364 = EDGE_LOOP ( 'NONE', ( #666, #270, #770, #751 ) ) ;
+#365 = LINE ( 'NONE', #569, #808 ) ;
+#366 = ORIENTED_EDGE ( 'NONE', *, *, #375, .T. ) ;
+#367 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#368 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#369 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#370 = EDGE_CURVE ( 'NONE', #332, #312, #746, .T. ) ;
+#371 = VECTOR ( 'NONE', #470, 39.37007874015748100 ) ;
+#372 = VECTOR ( 'NONE', #402, 39.37007874015748100 ) ;
+#373 = ADVANCED_FACE ( 'NONE', ( #422 ), #704, .F. ) ;
+#374 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#375 = EDGE_CURVE ( 'NONE', #99, #332, #728, .T. ) ;
+#376 = ORIENTED_EDGE ( 'NONE', *, *, #471, .F. ) ;
+#377 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894301300, -4.503561703872210400E-015, -2.795275590551181500 ) ) ;
+#378 = EDGE_CURVE ( 'NONE', #721, #99, #170, .T. ) ;
+#379 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ;
+#380 = FACE_OUTER_BOUND ( 'NONE', #364, .T. ) ;
+#381 = EDGE_CURVE ( 'NONE', #731, #721, #533, .T. ) ;
+#382 = ORIENTED_EDGE ( 'NONE', *, *, #370, .F. ) ;
+#383 = ORIENTED_EDGE ( 'NONE', *, *, #361, .T. ) ;
+#384 = PLANE ( 'NONE',  #244 ) ;
+#385 = EDGE_CURVE ( 'NONE', #399, #731, #684, .T. ) ;
+#386 = ORIENTED_EDGE ( 'NONE', *, *, #445, .T. ) ;
+#387 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.952755905511811600 ) ) ;
+#388 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.4719115247199389700, -2.512633316146487800 ) ) ;
+#389 = CYLINDRICAL_SURFACE ( 'NONE', #252, 0.01968503937007875700 ) ;
+#390 = VECTOR ( 'NONE', #491, 39.37007874015748100 ) ;
+#391 = EDGE_CURVE ( 'NONE', #399, #725, #512, .T. ) ;
+#392 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105698400, 4.748296834670738200E-015, -2.755905511811024100 ) ) ;
+#393 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#394 = EDGE_CURVE ( 'NONE', #675, #725, #333, .T. ) ;
+#395 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#396 = EDGE_CURVE ( 'NONE', #131, #675, #144, .T. ) ;
+#397 = LINE ( 'NONE', #140, #248 ) ;
+#398 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #243, 'distance_accuracy_value', 'NONE');
+#399 = VERTEX_POINT ( 'NONE', #713 ) ;
+#400 = FACE_OUTER_BOUND ( 'NONE', #201, .T. ) ;
+#401 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#402 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#403 = EDGE_CURVE ( 'NONE', #131, #166, #118, .T. ) ;
+#404 = PLANE ( 'NONE',  #327 ) ;
+#405 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#406 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#407 = ORIENTED_EDGE ( 'NONE', *, *, #441, .T. ) ;
+#408 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.3734863278695450000, -2.755905511811024100 ) ) ;
+#409 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#410 = EDGE_CURVE ( 'NONE', #67, #290, #294, .T. ) ;
+#411 = ORIENTED_EDGE ( 'NONE', *, *, #434, .T. ) ;
+#412 = EDGE_CURVE ( 'NONE', #555, #12, #490, .T. ) ;
+#413 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.952755905511811600 ) ) ;
+#414 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#415 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ;
+#416 = CYLINDRICAL_SURFACE ( 'NONE', #253, 0.05905511811023627500 ) ;
+#417 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#418 = EDGE_CURVE ( 'NONE', #184, #12, #466, .T. ) ;
+#419 = EDGE_CURVE ( 'NONE', #32, #184, #655, .T. ) ;
+#420 =( CONVERSION_BASED_UNIT ( 'INCH', #472 ) LENGTH_UNIT ( ) NAMED_UNIT ( #368 ) );
+#421 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#422 = FACE_OUTER_BOUND ( 'NONE', #663, .T. ) ;
+#423 = ORIENTED_EDGE ( 'NONE', *, *, #510, .F. ) ;
+#424 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#425 = PLANE ( 'NONE',  #162 ) ;
+#426 = EDGE_CURVE ( 'NONE', #163, #283, #100, .T. ) ;
+#427 = LINE ( 'NONE', #330, #601 ) ;
+#428 = EDGE_LOOP ( 'NONE', ( #9, #358, #315, #438, #477, #124, #238, #379 ) ) ;
+#429 = PLANE ( 'NONE',  #179 ) ;
+#430 = ORIENTED_EDGE ( 'NONE', *, *, #594, .F. ) ;
+#431 = VERTEX_POINT ( 'NONE', #310 ) ;
+#432 = CIRCLE ( 'NONE', #204, 0.05905511811023627500 ) ;
+#433 = ADVANCED_FACE ( 'NONE', ( #82 ), #416, .F. ) ;
+#434 = EDGE_CURVE ( 'NONE', #698, #104, #443, .T. ) ;
+#435 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#436 = EDGE_CURVE ( 'NONE', #228, #104, #613, .T. ) ;
+#437 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#438 = ORIENTED_EDGE ( 'NONE', *, *, #464, .T. ) ;
+#439 = ADVANCED_FACE ( 'NONE', ( #241 ), #389, .T. ) ;
+#440 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5703367215703329900, -2.755905511811024100 ) ) ;
+#441 = EDGE_CURVE ( 'NONE', #228, #22, #59, .T. ) ;
+#442 = ORIENTED_EDGE ( 'NONE', *, *, #385, .T. ) ;
+#443 = LINE ( 'NONE', #530, #761 ) ;
+#444 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #517 ) ;
+#445 = EDGE_CURVE ( 'NONE', #431, #22, #775, .T. ) ;
+#446 = PRODUCT_CONTEXT ( 'NONE', #517, 'mechanical' ) ;
+#447 = ADVANCED_FACE ( 'NONE', ( #591 ), #384, .T. ) ;
+#448 = EDGE_CURVE ( 'NONE', #431, #67, #570, .T. ) ;
+#449 = DIRECTION ( 'NONE',  ( 2.312964634635737100E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#450 = EDGE_CURVE ( 'NONE', #3, #135, #724, .T. ) ;
+#451 = ADVANCED_FACE ( 'NONE', ( #43 ), #670, .T. ) ;
+#452 = EDGE_CURVE ( 'NONE', #789, #550, #542, .T. ) ;
+#453 = LINE ( 'NONE', #734, #766 ) ;
+#454 = ORIENTED_EDGE ( 'NONE', *, *, #497, .T. ) ;
+#455 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#456 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ;
+#457 = VECTOR ( 'NONE', #687, 39.37007874015748100 ) ;
+#458 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, 0.0000000000000000000, -2.755905511811024100 ) ) ;
+#459 = EDGE_CURVE ( 'NONE', #789, #135, #26, .T. ) ;
+#460 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #657 );
+#461 = ORIENTED_EDGE ( 'NONE', *, *, #594, .T. ) ;
+#462 = ORIENTED_EDGE ( 'NONE', *, *, #459, .F. ) ;
+#463 = CARTESIAN_POINT ( 'NONE',  ( -1.289190551993207300E-016, -0.4719115247199384700, -2.952755905511811600 ) ) ;
+#464 = EDGE_CURVE ( 'NONE', #135, #68, #345, .T. ) ;
+#465 = ORIENTED_EDGE ( 'NONE', *, *, #549, .F. ) ;
+#466 = CIRCLE ( 'NONE', #262, 0.07874015748031502900 ) ;
+#467 = EDGE_CURVE ( 'NONE', #307, #789, #8, .T. ) ;
+#468 = VERTEX_POINT ( 'NONE', #197 ) ;
+#469 = ORIENTED_EDGE ( 'NONE', *, *, #426, .F. ) ;
+#470 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.731847993664263200E-016, 0.0000000000000000000 ) ) ;
+#471 = EDGE_CURVE ( 'NONE', #307, #319, #520, .T. ) ;
+#472 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #794 );
+#473 = DIRECTION ( 'NONE',  ( 2.312964634635737100E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#474 = LINE ( 'NONE', #727, #282 ) ;
+#475 = ORIENTED_EDGE ( 'NONE', *, *, #403, .F. ) ;
+#476 = EDGE_CURVE ( 'NONE', #319, #818, #155, .T. ) ;
+#477 = ORIENTED_EDGE ( 'NONE', *, *, #586, .F. ) ;
+#478 = CIRCLE ( 'NONE', #218, 0.05905511811023620600 ) ;
+#479 = ORIENTED_EDGE ( 'NONE', *, *, #554, .F. ) ;
+#480 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#481 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#482 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.795275590551181500 ) ) ;
+#483 = EDGE_CURVE ( 'NONE', #468, #818, #709, .T. ) ;
+#484 = VERTEX_POINT ( 'NONE', #123 ) ;
+#485 = EDGE_CURVE ( 'NONE', #509, #163, #500, .T. ) ;
+#486 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#487 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, -2.850953289857208500 ) ) ;
+#488 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.4613623439155639100, -2.795275590551181500 ) ) ;
+#489 = ORIENTED_EDGE ( 'NONE', *, *, #467, .F. ) ;
+#490 = LINE ( 'NONE', #523, #275 ) ;
+#491 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#492 = EDGE_CURVE ( 'NONE', #509, #40, #300, .T. ) ;
+#493 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.4719115247199391300, -2.512633316146487800 ) ) ;
+#494 = VERTEX_POINT ( 'NONE', #200 ) ;
+#495 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#496 = EDGE_CURVE ( 'NONE', #468, #274, #474, .T. ) ;
+#497 = EDGE_CURVE ( 'NONE', #274, #494, #811, .T. ) ;
+#498 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#499 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.755905511811024100 ) ) ;
+#500 = CIRCLE ( 'NONE', #232, 0.01968503937007875700 ) ;
+#501 = ORIENTED_EDGE ( 'NONE', *, *, #513, .F. ) ;
+#502 = ORIENTED_EDGE ( 'NONE', *, *, #599, .F. ) ;
+#503 = VECTOR ( 'NONE', #686, 39.37007874015748100 ) ;
+#504 = EDGE_CURVE ( 'NONE', #40, #207, #659, .T. ) ;
+#505 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, -2.854330708661417600 ) ) ;
+#506 = EDGE_CURVE ( 'NONE', #550, #207, #107, .T. ) ;
+#507 = PLANE ( 'NONE',  #185 ) ;
+#508 = ORIENTED_EDGE ( 'NONE', *, *, #609, .T. ) ;
+#509 = VERTEX_POINT ( 'NONE', #325 ) ;
+#510 = EDGE_CURVE ( 'NONE', #184, #40, #263, .T. ) ;
+#511 = VERTEX_POINT ( 'NONE', #401 ) ;
+#512 = CIRCLE ( 'NONE', #272, 0.01968503937007875700 ) ;
+#513 = EDGE_CURVE ( 'NONE', #12, #207, #780, .T. ) ;
+#514 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#515 = ADVANCED_FACE ( 'NONE', ( #127 ), #66, .F. ) ;
+#516 = ORIENTED_EDGE ( 'NONE', *, *, #528, .F. ) ;
+#517 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#518 = VECTOR ( 'NONE', #417, 39.37007874015748100 ) ;
+#519 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #45 ) ;
+#520 = CIRCLE ( 'NONE', #242, 0.07874015748031496000 ) ;
+#521 = ORIENTED_EDGE ( 'NONE', *, *, #350, .T. ) ;
+#522 = LINE ( 'NONE', #735, #503 ) ;
+#523 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, 0.0000000000000000000, -2.795275590551181500 ) ) ;
+#524 = EDGE_CURVE ( 'NONE', #634, #228, #453, .T. ) ;
+#525 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#526 = ORIENTED_EDGE ( 'NONE', *, *, #604, .F. ) ;
+#527 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#528 = EDGE_CURVE ( 'NONE', #283, #104, #427, .T. ) ;
+#529 = EDGE_CURVE ( 'NONE', #431, #642, #750, .T. ) ;
+#530 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#531 = ORIENTED_EDGE ( 'NONE', *, *, #391, .F. ) ;
+#532 = FACE_OUTER_BOUND ( 'NONE', #772, .T. ) ;
+#533 = CIRCLE ( 'NONE', #281, 0.05905511811023620600 ) ;
+#534 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#535 = ORIENTED_EDGE ( 'NONE', *, *, #598, .T. ) ;
+#536 = EDGE_CURVE ( 'NONE', #22, #76, #397, .T. ) ;
+#537 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#538 = ORIENTED_EDGE ( 'NONE', *, *, #381, .T. ) ;
+#539 = VECTOR ( 'NONE', #341, 39.37007874015748100 ) ;
+#540 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105698400, 4.748296834670738200E-015, -2.952755905511811600 ) ) ;
+#541 = EDGE_CURVE ( 'NONE', #67, #820, #47, .T. ) ;
+#542 = LINE ( 'NONE', #6, #371 ) ;
+#543 = EDGE_CURVE ( 'NONE', #32, #509, #592, .T. ) ;
+#544 = ORIENTED_EDGE ( 'NONE', *, *, #536, .F. ) ;
+#545 = LINE ( 'NONE', #630, #695 ) ;
+#546 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#547 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3734863278695450000, -2.775590551181102800 ) ) ;
+#548 = EDGE_CURVE ( 'NONE', #163, #698, #44, .T. ) ;
+#549 = EDGE_CURVE ( 'NONE', #307, #131, #222, .T. ) ;
+#550 = VERTEX_POINT ( 'NONE', #20 ) ;
+#551 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#552 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3734863278695450000, -2.755905511811024100 ) ) ;
+#553 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#554 = EDGE_CURVE ( 'NONE', #319, #675, #573, .T. ) ;
+#555 = VERTEX_POINT ( 'NONE', #482 ) ;
+#556 = FACE_OUTER_BOUND ( 'NONE', #256, .T. ) ;
+#557 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#558 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3538012884994662400, -2.913385826771654100 ) ) ;
+#559 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -2.586362690585028100E-018 ) ) ;
+#560 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3931713672396237600, -2.755905511811024100 ) ) ;
+#561 = ORIENTED_EDGE ( 'NONE', *, *, #471, .T. ) ;
+#562 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#563 = EDGE_CURVE ( 'NONE', #212, #99, #743, .T. ) ;
+#564 = FACE_OUTER_BOUND ( 'NONE', #781, .T. ) ;
+#565 = EDGE_CURVE ( 'NONE', #332, #484, #199, .T. ) ;
+#566 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.312964634635737100E-015, 0.0000000000000000000 ) ) ;
+#567 = ORIENTED_EDGE ( 'NONE', *, *, #580, .T. ) ;
+#568 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#569 = CARTESIAN_POINT ( 'NONE',  ( -1.289190551993210200E-016, -0.4719115247199395200, -2.952755905511811600 ) ) ;
+#570 = LINE ( 'NONE', #57, #219 ) ;
+#571 = EDGE_CURVE ( 'NONE', #274, #731, #545, .T. ) ;
+#572 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3341162491293874800, -2.850953289857209000 ) ) ;
+#573 = LINE ( 'NONE', #15, #711 ) ;
+#574 = EDGE_CURVE ( 'NONE', #721, #494, #10, .T. ) ;
+#575 = DIRECTION ( 'NONE',  ( 2.312964634635737100E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#576 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#577 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5506516822002542900, -2.854330708661417600 ) ) ;
+#578 = ORIENTED_EDGE ( 'NONE', *, *, #357, .T. ) ;
+#579 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#580 = EDGE_CURVE ( 'NONE', #399, #468, #182, .T. ) ;
+#581 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#582 = ORIENTED_EDGE ( 'NONE', *, *, #436, .F. ) ;
+#583 = EDGE_LOOP ( 'NONE', ( #346, #16, #386, #302 ) ) ;
+#584 = EDGE_CURVE ( 'NONE', #818, #725, #522, .T. ) ;
+#585 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.795275590551181500 ) ) ;
+#586 = EDGE_CURVE ( 'NONE', #312, #68, #676, .T. ) ;
+#587 = ORIENTED_EDGE ( 'NONE', *, *, #563, .F. ) ;
+#588 = FILL_AREA_STYLE_COLOUR ( '', #395 ) ;
+#589 = EDGE_CURVE ( 'NONE', #494, #212, #158, .T. ) ;
+#590 = SURFACE_SIDE_STYLE ('',( #4 ) ) ;
+#591 = FACE_OUTER_BOUND ( 'NONE', #637, .T. ) ;
+#592 = LINE ( 'NONE', #408, #390 ) ;
+#593 = EDGE_CURVE ( 'NONE', #642, #820, #798, .T. ) ;
+#594 = EDGE_CURVE ( 'NONE', #212, #484, #478, .T. ) ;
+#595 = VECTOR ( 'NONE', #575, 39.37007874015748100 ) ;
+#596 = ORIENTED_EDGE ( 'NONE', *, *, #352, .T. ) ;
+#597 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5703367215703329900, -2.775590551181102800 ) ) ;
+#598 = EDGE_CURVE ( 'NONE', #32, #698, #304, .T. ) ;
+#599 = EDGE_CURVE ( 'NONE', #820, #3, #782, .T. ) ;
+#600 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, 0.0000000000000000000, -2.952755905511811600 ) ) ;
+#601 = VECTOR ( 'NONE', #18, 39.37007874015748100 ) ;
+#602 = ORIENTED_EDGE ( 'NONE', *, *, #584, .T. ) ;
+#603 = FACE_OUTER_BOUND ( 'NONE', #111, .T. ) ;
+#604 = EDGE_CURVE ( 'NONE', #550, #3, #110, .T. ) ;
+#605 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#606 = SHAPE_DEFINITION_REPRESENTATION ( #722, #161 ) ;
+#607 = ORIENTED_EDGE ( 'NONE', *, *, #391, .T. ) ;
+#608 = ORIENTED_EDGE ( 'NONE', *, *, #381, .F. ) ;
+#609 = EDGE_CURVE ( 'NONE', #484, #68, #649, .T. ) ;
+#610 = EDGE_CURVE ( 'NONE', #634, #283, #265, .T. ) ;
+#611 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 2.731847993664263200E-016, 0.0000000000000000000 ) ) ;
+#612 = ORIENTED_EDGE ( 'NONE', *, *, #459, .T. ) ;
+#613 = CIRCLE ( 'NONE', #257, 0.05905511811023627500 ) ;
+#614 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105698400, 4.748296834670738200E-015, -2.795275590551181500 ) ) ;
+#615 = EDGE_CURVE ( 'NONE', #634, #76, #768, .T. ) ;
+#616 = EDGE_CURVE ( 'NONE', #642, #76, #432, .T. ) ;
+#617 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, 0.0000000000000000000, -2.755905511811024100 ) ) ;
+#618 = LINE ( 'NONE', #221, #595 ) ;
+#619 = ORIENTED_EDGE ( 'NONE', *, *, #510, .T. ) ;
+#620 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.6097068003104905200, -2.857708127465627500 ) ) ;
+#621 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#622 = VECTOR ( 'NONE', #629, 39.37007874015748100 ) ;
+#623 = ORIENTED_EDGE ( 'NONE', *, *, #506, .F. ) ;
+#624 = ORIENTED_EDGE ( 'NONE', *, *, #485, .T. ) ;
+#625 = ORIENTED_EDGE ( 'NONE', *, *, #529, .T. ) ;
+#626 = VECTOR ( 'NONE', #25, 39.37007874015748100 ) ;
+#627 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4613623439155640200, -2.795275590551181500 ) ) ;
+#628 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.206969255606346500E-016 ) ) ;
+#629 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#630 = CARTESIAN_POINT ( 'NONE',  ( 4.073012111157524400E-019, -0.5900217609404117000, -2.795275590551181500 ) ) ;
+#631 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105700200, -0.3538012884994662400, -2.775590551181102800 ) ) ;
+#632 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ;
+#633 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#634 = VERTEX_POINT ( 'NONE', #745 ) ;
+#635 = PLANE ( 'NONE',  #308 ) ;
+#636 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#637 = EDGE_LOOP ( 'NONE', ( #625, #632, #353, #128 ) ) ;
+#638 = VECTOR ( 'NONE', #306, 39.37007874015748100 ) ;
+#639 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#640 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#641 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 2.731847993664263200E-016, 0.0000000000000000000 ) ) ;
+#642 = VERTEX_POINT ( 'NONE', #691 ) ;
+#643 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 2.312964634635740700E-015, -1.000000000000000000 ) ) ;
+#644 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.4719115247199389700, -2.512633316146487800 ) ) ;
+#645 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#646 = VECTOR ( 'NONE', #11, 39.37007874015748100 ) ;
+#647 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#648 = ORIENTED_EDGE ( 'NONE', *, *, #396, .F. ) ;
+#649 = LINE ( 'NONE', #640, #626 ) ;
+#650 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5703367215703329900, -2.755905511811024100 ) ) ;
+#651 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4824607055243142500, -2.716535433070866600 ) ) ;
+#652 = ORIENTED_EDGE ( 'NONE', *, *, #450, .F. ) ;
+#653 = ADVANCED_FACE ( 'NONE', ( #251 ), #347, .F. ) ;
+#654 = ORIENTED_EDGE ( 'NONE', *, *, #441, .F. ) ;
+#655 = LINE ( 'NONE', #458, #638 ) ;
+#656 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#657 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#658 = ADVANCED_FACE ( 'NONE', ( #753 ), #696, .T. ) ;
+#659 = CIRCLE ( 'NONE', #224, 0.07874015748031502900 ) ;
+#660 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#661 = ORIENTED_EDGE ( 'NONE', *, *, #426, .T. ) ;
+#662 = VECTOR ( 'NONE', #21, 39.37007874015748100 ) ;
+#663 = EDGE_LOOP ( 'NONE', ( #93, #423, #303, #58 ) ) ;
+#664 = DIRECTION ( 'NONE',  ( -1.241454091480813700E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#665 = PRESENTATION_STYLE_ASSIGNMENT (( #178 ) ) ;
+#666 = ORIENTED_EDGE ( 'NONE', *, *, #476, .F. ) ;
+#667 = ORIENTED_EDGE ( 'NONE', *, *, #419, .F. ) ;
+#668 = VECTOR ( 'NONE', #449, 39.37007874015748100 ) ;
+#669 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3341162491293874800, -2.857708127465627500 ) ) ;
+#670 = PLANE ( 'NONE',  #239 ) ;
+#671 = SURFACE_STYLE_FILL_AREA ( #279 ) ;
+#672 = DIRECTION ( 'NONE',  ( -2.312964634635737100E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#673 = VECTOR ( 'NONE', #473, 39.37007874015748100 ) ;
+#674 = ORIENTED_EDGE ( 'NONE', *, *, #485, .F. ) ;
+#675 = VERTEX_POINT ( 'NONE', #351 ) ;
+#676 = LINE ( 'NONE', #336, #129 ) ;
+#677 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.4613623439155639100, -2.716535433070866600 ) ) ;
+#678 = EDGE_LOOP ( 'NONE', ( #324, #121, #544, #654 ) ) ;
+#679 = EDGE_LOOP ( 'NONE', ( #596, #115, #521, #81 ) ) ;
+#680 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3931713672396238700, -2.755905511811024100 ) ) ;
+#681 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#682 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300700, -0.4824607055243142500, -2.795275590551181500 ) ) ;
+#683 = EDGE_LOOP ( 'NONE', ( #718, #624, #702, #215 ) ) ;
+#684 = LINE ( 'NONE', #159, #313 ) ;
+#685 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#686 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#687 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#688 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.913385826771654600 ) ) ;
+#689 = LINE ( 'NONE', #741, #518 ) ;
+#690 = FILL_AREA_STYLE_COLOUR ( '', #151 ) ;
+#691 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3538012884994662400, -2.913385826771654600 ) ) ;
+#692 = VECTOR ( 'NONE', #194, 39.37007874015748100 ) ;
+#693 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4613623439155640200, -2.716535433070866600 ) ) ;
+#694 = ORIENTED_EDGE ( 'NONE', *, *, #528, .T. ) ;
+#695 = VECTOR ( 'NONE', #786, 39.37007874015748100 ) ;
+#696 = PLANE ( 'NONE',  #189 ) ;
+#697 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#698 = VERTEX_POINT ( 'NONE', #225 ) ;
+#699 = DIRECTION ( 'NONE',  ( -2.586362690585028100E-018, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#700 = ADVANCED_FACE ( 'NONE', ( #400 ), #425, .F. ) ;
+#701 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#702 = ORIENTED_EDGE ( 'NONE', *, *, #548, .T. ) ;
+#703 = FACE_OUTER_BOUND ( 'NONE', #679, .T. ) ;
+#704 = CYLINDRICAL_SURFACE ( 'NONE', #277, 0.07874015748031496000 ) ;
+#705 = ADVANCED_FACE ( 'NONE', ( #53 ), #229, .T. ) ;
+#706 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.4719115247199389700, -2.795275590551181500 ) ) ;
+#707 = CYLINDRICAL_SURFACE ( 'NONE', #328, 0.05905511811023627500 ) ;
+#708 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#709 = CIRCLE ( 'NONE', #236, 0.01968503937007875700 ) ;
+#710 = ADVANCED_FACE ( 'NONE', ( #732 ), #208, .T. ) ;
+#711 = VECTOR ( 'NONE', #553, 39.37007874015748100 ) ;
+#712 = ADVANCED_FACE ( 'NONE', ( #603 ), #507, .T. ) ;
+#713 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.775590551181102800 ) ) ;
+#714 = ORIENTED_EDGE ( 'NONE', *, *, #419, .T. ) ;
+#715 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#716 = ORIENTED_EDGE ( 'NONE', *, *, #492, .T. ) ;
+#717 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#718 = ORIENTED_EDGE ( 'NONE', *, *, #543, .T. ) ;
+#719 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 2.312964634635740700E-015, -1.000000000000000000 ) ) ;
+#720 = EDGE_LOOP ( 'NONE', ( #567, #348, #602, #531 ) ) ;
+#721 = VERTEX_POINT ( 'NONE', #90 ) ;
+#722 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #97 ) ;
+#723 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#724 = LINE ( 'NONE', #463, #198 ) ;
+#725 = VERTEX_POINT ( 'NONE', #650 ) ;
+#726 = VECTOR ( 'NONE', #79, 39.37007874015748100 ) ;
+#727 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#728 = CIRCLE ( 'NONE', #278, 0.05905511811023620600 ) ;
+#729 = ORIENTED_EDGE ( 'NONE', *, *, #543, .F. ) ;
+#730 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -8.673617379884028600E-016, -1.000000000000000000 ) ) ;
+#731 = VERTEX_POINT ( 'NONE', #231 ) ;
+#732 = FACE_OUTER_BOUND ( 'NONE', #683, .T. ) ;
+#733 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.512633316146487800 ) ) ;
+#734 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, -2.850953289857210300 ) ) ;
+#735 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5703367215703329900, -2.755905511811024100 ) ) ;
+#736 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#737 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ;
+#738 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#739 = ORIENTED_EDGE ( 'NONE', *, *, #504, .T. ) ;
+#740 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.731847993664263200E-016, 0.0000000000000000000 ) ) ;
+#741 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.512633316146487800 ) ) ;
+#742 = VECTOR ( 'NONE', #534, 39.37007874015748100 ) ;
+#743 = LINE ( 'NONE', #138, #349 ) ;
+#744 = SURFACE_SIDE_STYLE ('',( #671 ) ) ;
+#745 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105700200, -0.3931713672396237000, -2.850953289857209000 ) ) ;
+#746 = LINE ( 'NONE', #495, #227 ) ;
+#747 = ORIENTED_EDGE ( 'NONE', *, *, #586, .T. ) ;
+#748 = DIRECTION ( 'NONE',  ( -2.312964634635737100E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#749 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3734863278695450000, -2.775590551181102800 ) ) ;
+#750 = LINE ( 'NONE', #558, #230 ) ;
+#751 = ORIENTED_EDGE ( 'NONE', *, *, #584, .F. ) ;
+#752 = ORIENTED_EDGE ( 'NONE', *, *, #574, .F. ) ;
+#753 = FACE_OUTER_BOUND ( 'NONE', #233, .T. ) ;
+#754 = ADVANCED_FACE ( 'NONE', ( #380 ), #429, .F. ) ;
+#755 = PLANE ( 'NONE',  #167 ) ;
+#756 = ADVANCED_FACE ( 'NONE', ( #234 ), #359, .F. ) ;
+#757 = ORIENTED_EDGE ( 'NONE', *, *, #370, .T. ) ;
+#758 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#759 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#760 = ORIENTED_EDGE ( 'NONE', *, *, #343, .F. ) ;
+#761 = VECTOR ( 'NONE', #116, 39.37007874015748100 ) ;
+#762 = ADVANCED_FACE ( 'NONE', ( #35 ), #17, .F. ) ;
+#763 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.6097068003104905200, -2.850953289857208500 ) ) ;
+#764 = ADVANCED_FACE ( 'NONE', ( #556 ), #755, .T. ) ;
+#765 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#766 = VECTOR ( 'NONE', #268, 39.37007874015748100 ) ;
+#767 = ORIENTED_EDGE ( 'NONE', *, *, #396, .T. ) ;
+#768 = LINE ( 'NONE', #84, #69 ) ;
+#769 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#770 = ORIENTED_EDGE ( 'NONE', *, *, #394, .T. ) ;
+#771 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.4613623439155638000, -2.795275590551181500 ) ) ;
+#772 = EDGE_LOOP ( 'NONE', ( #41, #165, #757, #747 ) ) ;
+#773 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#774 = ORIENTED_EDGE ( 'NONE', *, *, #580, .F. ) ;
+#775 = CIRCLE ( 'NONE', #292, 0.05905511811023627500 ) ;
+#776 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#777 = ADVANCED_FACE ( 'NONE', ( #703 ), #36, .F. ) ;
+#778 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #420, 'distance_accuracy_value', 'NONE');
+#779 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#780 = LINE ( 'NONE', #627, #622 ) ;
+#781 = EDGE_LOOP ( 'NONE', ( #175, #14, #117, #516 ) ) ;
+#782 = LINE ( 'NONE', #276, #457 ) ;
+#783 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, 0.0000000000000000000, -2.795275590551181500 ) ) ;
+#784 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3931713672396237000, -2.857708127465627100 ) ) ;
+#785 = ORIENTED_EDGE ( 'NONE', *, *, #403, .T. ) ;
+#786 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 2.586362690585028100E-018 ) ) ;
+#787 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5506516822002542900, -2.857708127465627500 ) ) ;
+#788 = ORIENTED_EDGE ( 'NONE', *, *, #418, .F. ) ;
+#789 = VERTEX_POINT ( 'NONE', #706 ) ;
+#790 = VECTOR ( 'NONE', #112, 39.37007874015748100 ) ;
+#791 = CARTESIAN_POINT ( 'NONE',  ( 2.052905074105699800, -0.5900217609404117000, -2.795275590551181500 ) ) ;
+#792 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#793 = CARTESIAN_POINT ( 'NONE',  ( -1.289190551993210200E-016, -0.4719115247199395200, -2.795275590551181500 ) ) ;
+#794 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#795 = CARTESIAN_POINT ( 'NONE',  ( 2.552905074105699800, -0.3341162491293874800, -2.857708127465627100 ) ) ;
+#796 = VECTOR ( 'NONE', #64, 39.37007874015748100 ) ;
+#797 = EDGE_LOOP ( 'NONE', ( #1, #774, #442, #802 ) ) ;
+#798 = LINE ( 'NONE', #562, #285 ) ;
+#799 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#800 = EDGE_LOOP ( 'NONE', ( #652, #526, #815, #612 ) ) ;
+#801 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#802 = ORIENTED_EDGE ( 'NONE', *, *, #571, .F. ) ;
+#803 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#804 = ORIENTED_EDGE ( 'NONE', *, *, #375, .F. ) ;
+#805 = VECTOR ( 'NONE', #765, 39.37007874015748100 ) ;
+#806 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3931713672396237000, -2.854330708661417600 ) ) ;
+#807 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#808 = VECTOR ( 'NONE', #641, 39.37007874015748100 ) ;
+#809 = ADVANCED_FACE ( 'NONE', ( #532 ), #237, .F. ) ;
+#810 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#811 = CIRCLE ( 'NONE', #226, 0.05905511811023620600 ) ;
+#812 = ORIENTED_EDGE ( 'NONE', *, *, #476, .T. ) ;
+#813 = ADVANCED_FACE ( 'NONE', ( #187 ), #39, .T. ) ;
+#814 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 9.251858538542973800E-015 ) ) ;
+#815 = ORIENTED_EDGE ( 'NONE', *, *, #452, .F. ) ;
+#816 = VECTOR ( 'NONE', #141, 39.37007874015748100 ) ;
+#817 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4824607055243142500, -2.716535433070866600 ) ) ;
+#818 = VERTEX_POINT ( 'NONE', #440 ) ;
+#819 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#820 = VERTEX_POINT ( 'NONE', #656 ) ;
+#821 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Trigger_Rod_Left_3.step

@@ -0,0 +1,941 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trigger_Rod_Left_3.step',
+    '2014-05-14T06:09:26',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#2 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#3 = EDGE_LOOP ( 'NONE', ( #432, #261, #344, #402, #179, #765, #721, #467, #879, #886 ) ) ;
+#4 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#5 = ORIENTED_EDGE ( 'NONE', *, *, #649, .T. ) ;
+#6 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#7 = CIRCLE ( 'NONE', #295, 0.07874015748031502900 ) ;
+#8 = EDGE_LOOP ( 'NONE', ( #733, #103, #599, #794 ) ) ;
+#9 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5506516822002542900, -2.854330708661417600 ) ) ;
+#10 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#11 = FACE_OUTER_BOUND ( 'NONE', #23, .T. ) ;
+#12 = EDGE_CURVE ( 'NONE', #573, #30, #77, .T. ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3341162491293874800, -2.854330708661417600 ) ) ;
+#14 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#15 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#16 = VERTEX_POINT ( 'NONE', #102 ) ;
+#17 = CIRCLE ( 'NONE', #470, 0.05905511811023627500 ) ;
+#18 = CARTESIAN_POINT ( 'NONE',  ( -4.716323112443796500, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#19 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#20 = CIRCLE ( 'NONE', #246, 0.07874015748031502900 ) ;
+#21 = EDGE_LOOP ( 'NONE', ( #419, #690, #95, #407, #352, #909, #328 ) ) ;
+#22 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#23 = EDGE_LOOP ( 'NONE', ( #645, #610, #69, #144 ) ) ;
+#24 = DIRECTION ( 'NONE',  ( 2.312964634635737100E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3341162491293874800, -2.850953289857208500 ) ) ;
+#26 = ORIENTED_EDGE ( 'NONE', *, *, #509, .T. ) ;
+#27 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#28 = ORIENTED_EDGE ( 'NONE', *, *, #498, .F. ) ;
+#29 = LINE ( 'NONE', #722, #761 ) ;
+#30 = VERTEX_POINT ( 'NONE', #154 ) ;
+#31 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3538012884994662400, -2.913385826771655000 ) ) ;
+#32 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ;
+#33 = LINE ( 'NONE', #207, #372 ) ;
+#34 =( CONVERSION_BASED_UNIT ( 'INCH', #297 ) LENGTH_UNIT ( ) NAMED_UNIT ( #647 ) );
+#35 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#36 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#37 = VERTEX_POINT ( 'NONE', #833 ) ;
+#38 = CYLINDRICAL_SURFACE ( 'NONE', #71, 0.05905511811023627500 ) ;
+#39 = FACE_OUTER_BOUND ( 'NONE', #454, .T. ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.795275590551181500 ) ) ;
+#41 = VECTOR ( 'NONE', #677, 39.37007874015748100 ) ;
+#42 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -4.212598425196852700 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #683, .T. ) ;
+#44 = AXIS2_PLACEMENT_3D ( 'NONE', #53, #545, #111 ) ;
+#45 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #105 ) ;
+#46 = CARTESIAN_POINT ( 'NONE',  ( -4.619694921210810700, -0.5703367215703331100, -2.755905511811024100 ) ) ;
+#47 = PRODUCT_CONTEXT ( 'NONE', #105, 'mechanical' ) ;
+#48 = VERTEX_POINT ( 'NONE', #836 ) ;
+#49 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#50 = VERTEX_POINT ( 'NONE', #235 ) ;
+#51 = ORIENTED_EDGE ( 'NONE', *, *, #674, .F. ) ;
+#52 = EDGE_CURVE ( 'NONE', #803, #341, #248, .T. ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.795275590551181500 ) ) ;
+#54 = VECTOR ( 'NONE', #135, 39.37007874015748100 ) ;
+#55 = ORIENTED_EDGE ( 'NONE', *, *, #702, .F. ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.512633316146487800 ) ) ;
+#57 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#58 = ADVANCED_FACE ( 'NONE', ( #637, #434 ), #106, .F. ) ;
+#59 = ORIENTED_EDGE ( 'NONE', *, *, #617, .F. ) ;
+#60 = FACE_OUTER_BOUND ( 'NONE', #532, .T. ) ;
+#61 = CIRCLE ( 'NONE', #340, 0.01968503937007875700 ) ;
+#62 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5703367215703329900, -2.775590551181102800 ) ) ;
+#64 = LINE ( 'NONE', #812, #80 ) ;
+#65 = VECTOR ( 'NONE', #695, 39.37007874015748100 ) ;
+#66 = VERTEX_POINT ( 'NONE', #893 ) ;
+#67 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 2.312964634635740700E-015, -1.000000000000000000 ) ) ;
+#68 = VERTEX_POINT ( 'NONE', #394 ) ;
+#69 = ORIENTED_EDGE ( 'NONE', *, *, #355, .T. ) ;
+#70 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4719115247199389700, -2.512633316146487800 ) ) ;
+#71 = AXIS2_PLACEMENT_3D ( 'NONE', #627, #241, #840 ) ;
+#72 = VERTEX_POINT ( 'NONE', #46 ) ;
+#73 = VECTOR ( 'NONE', #510, 39.37007874015748100 ) ;
+#74 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.4613623439155638000, -2.716535433070866600 ) ) ;
+#75 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#76 = VERTEX_POINT ( 'NONE', #311 ) ;
+#77 = CIRCLE ( 'NONE', #254, 0.05905511811023627500 ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.6097068003104905200, -2.850953289857208100 ) ) ;
+#79 = LINE ( 'NONE', #531, #223 ) ;
+#80 = VECTOR ( 'NONE', #357, 39.37007874015748100 ) ;
+#81 = AXIS2_PLACEMENT_3D ( 'NONE', #898, #472, #49 ) ;
+#82 = CARTESIAN_POINT ( 'NONE',  ( -4.628432330112944200, -0.5875889098837878700, -2.764830261359006800 ) ) ;
+#83 = VECTOR ( 'NONE', #218, 39.37007874015748100 ) ;
+#84 = ORIENTED_EDGE ( 'NONE', *, *, #688, .F. ) ;
+#85 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#86 = EDGE_LOOP ( 'NONE', ( #292, #850, #888, #162 ) ) ;
+#87 = ORIENTED_EDGE ( 'NONE', *, *, #560, .T. ) ;
+#88 = ORIENTED_EDGE ( 'NONE', *, *, #591, .F. ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, -2.850953289857210300 ) ) ;
+#90 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#91 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#92 = LINE ( 'NONE', #437, #841 ) ;
+#93 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.5506516822002542900, -2.755905511811024100 ) ) ;
+#94 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#95 = ORIENTED_EDGE ( 'NONE', *, *, #739, .T. ) ;
+#96 = VERTEX_POINT ( 'NONE', #543 ) ;
+#97 = FACE_OUTER_BOUND ( 'NONE', #8, .T. ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4613623439155640200, -2.716535433070866600 ) ) ;
+#99 = AXIS2_PLACEMENT_3D ( 'NONE', #392, #238, #777 ) ;
+#100 = ADVANCED_FACE ( 'NONE', ( #60 ), #409, .T. ) ;
+#101 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3931713672396237600, -2.755905511811024100 ) ) ;
+#102 = CARTESIAN_POINT ( 'NONE',  ( -4.366958406048766500, -0.4719115247199386400, -2.755905511811024100 ) ) ;
+#103 = ORIENTED_EDGE ( 'NONE', *, *, #481, .T. ) ;
+#104 = VERTEX_POINT ( 'NONE', #710 ) ;
+#105 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#106 = PLANE ( 'NONE',  #99 ) ;
+#107 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #542 ) ;
+#108 = ORIENTED_EDGE ( 'NONE', *, *, #648, .F. ) ;
+#109 = VECTOR ( 'NONE', #14, 39.37007874015748100 ) ;
+#110 = ORIENTED_EDGE ( 'NONE', *, *, #698, .F. ) ;
+#111 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #649, .F. ) ;
+#113 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #542, 'design' ) ;
+#114 = VECTOR ( 'NONE', #799, 39.37007874015748100 ) ;
+#115 = ORIENTED_EDGE ( 'NONE', *, *, #674, .T. ) ;
+#116 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#117 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.312964634635737100E-015, 0.0000000000000000000 ) ) ;
+#118 = ADVANCED_FACE ( 'NONE', ( #222 ), #38, .F. ) ;
+#119 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#120 = EDGE_LOOP ( 'NONE', ( #816, #130, #268, #544 ) ) ;
+#121 = EDGE_LOOP ( 'NONE', ( #28, #775, #635, #679, #399, #605, #598, #187 ) ) ;
+#122 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#123 = VECTOR ( 'NONE', #10, 39.37007874015748100 ) ;
+#124 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.6097068003104905200, -2.857708127465628000 ) ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.913385826771654600 ) ) ;
+#126 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -8.673617379884028600E-016, -1.000000000000000000 ) ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199386400, -2.716535433070866600 ) ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #746, .F. ) ;
+#129 = VECTOR ( 'NONE', #854, 39.37007874015748100 ) ;
+#130 = ORIENTED_EDGE ( 'NONE', *, *, #581, .F. ) ;
+#131 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( -4.621991964224364800, -0.5753482777602916300, -2.755905511811024100 ) ) ;
+#133 = ORIENTED_EDGE ( 'NONE', *, *, #607, .T. ) ;
+#134 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#135 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#136 = VERTEX_POINT ( 'NONE', #779 ) ;
+#137 = CIRCLE ( 'NONE', #439, 0.003377418804209106100 ) ;
+#138 = FACE_OUTER_BOUND ( 'NONE', #423, .T. ) ;
+#139 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -1.206969255606346500E-016 ) ) ;
+#140 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, 0.0000000000000000000, -2.755905511811024100 ) ) ;
+#141 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#142 = VERTEX_POINT ( 'NONE', #313 ) ;
+#143 = VECTOR ( 'NONE', #728, 39.37007874015748100 ) ;
+#144 = ORIENTED_EDGE ( 'NONE', *, *, #517, .F. ) ;
+#145 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.3931713672396239800, -2.755905511811024100 ) ) ;
+#146 = CIRCLE ( 'NONE', #386, 0.07874015748031502900 ) ;
+#147 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#148 = ADVANCED_FACE ( 'NONE', ( #824 ), #397, .T. ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3341162491293874800, -2.850953289857210300 ) ) ;
+#150 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#151 = ORIENTED_EDGE ( 'NONE', *, *, #541, .T. ) ;
+#152 = CIRCLE ( 'NONE', #464, 0.05905511811023627500 ) ;
+#153 = CIRCLE ( 'NONE', #245, 0.2362204724409445500 ) ;
+#154 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, -2.857708127465628000 ) ) ;
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #698, .T. ) ;
+#156 = CYLINDRICAL_SURFACE ( 'NONE', #451, 0.05905511811023627500 ) ;
+#157 = FACE_OUTER_BOUND ( 'NONE', #233, .T. ) ;
+#158 = SURFACE_SIDE_STYLE ('',( #631 ) ) ;
+#159 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #623, .F. ) ;
+#161 = AXIS2_PLACEMENT_3D ( 'NONE', #622, #159, #707 ) ;
+#162 = ORIENTED_EDGE ( 'NONE', *, *, #514, .T. ) ;
+#163 = VECTOR ( 'NONE', #122, 39.37007874015748100 ) ;
+#164 = EDGE_LOOP ( 'NONE', ( #535, #569, #811, #221, #88, #212, #496, #778 ) ) ;
+#165 = ORIENTED_EDGE ( 'NONE', *, *, #486, .T. ) ;
+#166 = SURFACE_STYLE_FILL_AREA ( #821 ) ;
+#167 = DIRECTION ( 'NONE',  ( -2.731847993664263200E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#168 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #859 ) ) ;
+#169 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #859, .NOT_KNOWN. ) ;
+#170 = CARTESIAN_POINT ( 'NONE',  ( -5.070653821105214100, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#171 = ADVANCED_FACE ( 'NONE', ( #786 ), #611, .F. ) ;
+#172 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #169, #113 ) ;
+#173 = EDGE_LOOP ( 'NONE', ( #128, #726, #370, #522 ) ) ;
+#174 = LINE ( 'NONE', #556, #360 ) ;
+#175 = AXIS2_PLACEMENT_3D ( 'NONE', #234, #897, #471 ) ;
+#176 = VECTOR ( 'NONE', #24, 39.37007874015748100 ) ;
+#177 = ORIENTED_EDGE ( 'NONE', *, *, #534, .T. ) ;
+#178 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #560, .F. ) ;
+#180 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#181 = EDGE_LOOP ( 'NONE', ( #877, #391 ) ) ;
+#182 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#183 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #205 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #776, #309, #839 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#184 = TOROIDAL_SURFACE ( 'NONE', #308, 0.003377418804209481600, 0.05905511811023622700 ) ;
+#185 = ORIENTED_EDGE ( 'NONE', *, *, #486, .F. ) ;
+#186 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #534, .F. ) ;
+#188 = LINE ( 'NONE', #140, #783 ) ;
+#189 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #236 );
+#190 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #199 ), #183 ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636448900, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#192 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#193 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #199 ) ) ;
+#194 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#195 = ORIENTED_EDGE ( 'NONE', *, *, #575, .F. ) ;
+#196 = FACE_OUTER_BOUND ( 'NONE', #869, .T. ) ;
+#197 = CIRCLE ( 'NONE', #321, 0.05905511811023627500 ) ;
+#198 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#199 = STYLED_ITEM ( 'NONE', ( #427 ), #389 ) ;
+#200 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#201 = VECTOR ( 'NONE', #139, 39.37007874015748100 ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #661, .T. ) ;
+#203 = CARTESIAN_POINT ( 'NONE',  ( -1.289190551993210200E-016, -0.4719115247199395200, -2.952755905511811600 ) ) ;
+#204 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4824607055243142500, -2.716535433070866600 ) ) ;
+#205 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #776, 'distance_accuracy_value', 'NONE');
+#206 = AXIS2_PLACEMENT_3D ( 'NONE', #42, #387, #618 ) ;
+#207 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.3734863278695450000, -2.755905511811024100 ) ) ;
+#208 = AXIS2_PLACEMENT_3D ( 'NONE', #231, #302, #700 ) ;
+#209 = ORIENTED_EDGE ( 'NONE', *, *, #694, .T. ) ;
+#210 = CARTESIAN_POINT ( 'NONE',  ( -4.627445774367491700, -0.3580663228578980200, -2.763087627093102800 ) ) ;
+#211 = VERTEX_POINT ( 'NONE', #842 ) ;
+#212 = ORIENTED_EDGE ( 'NONE', *, *, #602, .F. ) ;
+#213 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#214 = AXIS2_PLACEMENT_3D ( 'NONE', #299, #150, #615 ) ;
+#215 = LINE ( 'NONE', #594, #54 ) ;
+#216 = CARTESIAN_POINT ( 'NONE',  ( -4.298767429372826900, -0.4719115247199386400, -2.716535433070866600 ) ) ;
+#217 = AXIS2_PLACEMENT_3D ( 'NONE', #379, #697, #829 ) ;
+#218 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#219 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#220 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #147, #225 ) ;
+#221 = ORIENTED_EDGE ( 'NONE', *, *, #749, .T. ) ;
+#222 = FACE_OUTER_BOUND ( 'NONE', #798, .T. ) ;
+#223 = VECTOR ( 'NONE', #614, 39.37007874015748100 ) ;
+#224 = ADVANCED_FACE ( 'NONE', ( #805 ), #630, .T. ) ;
+#225 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#226 = FACE_OUTER_BOUND ( 'NONE', #247, .T. ) ;
+#227 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #563 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #834, #390, #892 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#228 = AXIS2_PLACEMENT_3D ( 'NONE', #285, #36, #528 ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4719115247199389700, -2.512633316146487800 ) ) ;
+#230 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #351, #274, #82, #586, #132, #672 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 4 ),
+ ( 0.0000000000000000000, 0.0004147974969107890000, 0.0008295949938215780000 ),
+ .UNSPECIFIED. ) ;
+#231 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3341162491293874800, -2.857708127465626200 ) ) ;
+#232 = VECTOR ( 'NONE', #457, 39.37007874015748100 ) ;
+#233 = EDGE_LOOP ( 'NONE', ( #568, #237, #651, #428, #26 ) ) ;
+#234 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#235 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#236 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#237 = ORIENTED_EDGE ( 'NONE', *, *, #718, .T. ) ;
+#238 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#239 = EDGE_LOOP ( 'NONE', ( #744, #851, #316, #177, #745 ) ) ;
+#240 = VERTEX_POINT ( 'NONE', #403 ) ;
+#241 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 2.586362690585028100E-018 ) ) ;
+#242 = CIRCLE ( 'NONE', #414, 0.07874015748031502900 ) ;
+#243 = AXIS2_PLACEMENT_3D ( 'NONE', #375, #883, #458 ) ;
+#244 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#245 = AXIS2_PLACEMENT_3D ( 'NONE', #367, #219, #768 ) ;
+#246 = AXIS2_PLACEMENT_3D ( 'NONE', #686, #213, #757 ) ;
+#247 = EDGE_LOOP ( 'NONE', ( #524, #334, #815, #691, #820, #512, #759, #388, #785, #626, #115 ) ) ;
+#248 = CIRCLE ( 'NONE', #161, 0.07874015748031502900 ) ;
+#249 = CIRCLE ( 'NONE', #349, 0.01968503937007875700 ) ;
+#250 = LINE ( 'NONE', #808, #642 ) ;
+#251 = ADVANCED_FACE ( 'NONE', ( #196 ), #634, .T. ) ;
+#252 = LINE ( 'NONE', #689, #810 ) ;
+#253 = ORIENTED_EDGE ( 'NONE', *, *, #660, .T. ) ;
+#254 = AXIS2_PLACEMENT_3D ( 'NONE', #619, #890, #306 ) ;
+#255 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3341162491293874800, -2.857708127465627500 ) ) ;
+#256 = VERTEX_POINT ( 'NONE', #550 ) ;
+#257 = VERTEX_POINT ( 'NONE', #319 ) ;
+#258 = AXIS2_PLACEMENT_3D ( 'NONE', #27, #518, #91 ) ;
+#259 = ORIENTED_EDGE ( 'NONE', *, *, #52, .T. ) ;
+#260 = AXIS2_PLACEMENT_3D ( 'NONE', #276, #134, #673 ) ;
+#261 = ORIENTED_EDGE ( 'NONE', *, *, #553, .F. ) ;
+#262 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.795275590551181500 ) ) ;
+#263 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#264 = VECTOR ( 'NONE', #506, 39.37007874015748100 ) ;
+#265 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#266 = AXIS2_PLACEMENT_3D ( 'NONE', #513, #85, #593 ) ;
+#267 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5900217609404117000, -2.913385826771655000 ) ) ;
+#268 = ORIENTED_EDGE ( 'NONE', *, *, #660, .F. ) ;
+#269 = EDGE_LOOP ( 'NONE', ( #110, #632, #303, #377 ) ) ;
+#270 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#271 = AXIS2_PLACEMENT_3D ( 'NONE', #353, #866, #440 ) ;
+#272 = TOROIDAL_SURFACE ( 'NONE', #277, 0.003377418804208867100, 0.05905511811023622700 ) ;
+#273 = CARTESIAN_POINT ( 'NONE',  ( -4.716323112443796500, -0.4719115247199389700, -4.212598425196852700 ) ) ;
+#274 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636448900, -0.5900217609404117000, -2.770062415648740100 ) ) ;
+#275 = AXIS2_PLACEMENT_3D ( 'NONE', #671, #198, #742 ) ;
+#276 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.512633316146487800 ) ) ;
+#277 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #505, #580 ) ;
+#278 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#279 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#280 = ORIENTED_EDGE ( 'NONE', *, *, #760, .T. ) ;
+#281 = VERTEX_POINT ( 'NONE', #315 ) ;
+#282 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 2.731847993664263200E-016, 0.0000000000000000000 ) ) ;
+#283 = AXIS2_PLACEMENT_3D ( 'NONE', #804, #350, #865 ) ;
+#284 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#285 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#286 = CARTESIAN_POINT ( 'NONE',  ( -4.629520340987647300, -0.3543857340882598500, -2.770125284121794700 ) ) ;
+#287 = LINE ( 'NONE', #667, #264 ) ;
+#288 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #862, #430 ) ;
+#289 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894301300, -4.503561703872210400E-015, -2.755905511811024100 ) ) ;
+#290 = AXIS2_PLACEMENT_3D ( 'NONE', #502, #75, #578 ) ;
+#291 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#292 = ORIENTED_EDGE ( 'NONE', *, *, #625, .F. ) ;
+#293 = EDGE_CURVE ( 'NONE', #142, #573, #17, .T. ) ;
+#294 = CIRCLE ( 'NONE', #288, 0.05905511811023682300 ) ;
+#295 = AXIS2_PLACEMENT_3D ( 'NONE', #74, #570, #126 ) ;
+#296 = ADVANCED_FACE ( 'NONE', ( #585 ), #354, .F. ) ;
+#297 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #452 );
+#298 = CARTESIAN_POINT ( 'NONE',  ( -4.887614533388943000E-018, -0.5900217609404117000, -2.913385826771654600 ) ) ;
+#299 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5703367215703329900, -2.775590551181102800 ) ) ;
+#300 = AXIS2_PLACEMENT_3D ( 'NONE', #337, #857, #424 ) ;
+#301 = ORIENTED_EDGE ( 'NONE', *, *, #701, .F. ) ;
+#302 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#303 = ORIENTED_EDGE ( 'NONE', *, *, #702, .T. ) ;
+#304 = ORIENTED_EDGE ( 'NONE', *, *, #617, .T. ) ;
+#305 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#306 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#307 = AXIS2_PLACEMENT_3D ( 'NONE', #124, #656, #180 ) ;
+#308 = AXIS2_PLACEMENT_3D ( 'NONE', #650, #849, #178 ) ;
+#309 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#310 = FACE_BOUND ( 'NONE', #181, .T. ) ;
+#311 = CARTESIAN_POINT ( 'NONE',  ( -4.619694921210810700, -0.3734863278695449400, -2.755905511811024100 ) ) ;
+#312 = CYLINDRICAL_SURFACE ( 'NONE', #214, 0.01968503937007875700 ) ;
+#313 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3538012884994662400, -2.795275590551181500 ) ) ;
+#314 = AXIS2_PLACEMENT_3D ( 'NONE', #421, #1, #493 ) ;
+#315 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636448900, -0.3538012884994662400, -2.775590551181102800 ) ) ;
+#316 = ORIENTED_EDGE ( 'NONE', *, *, #546, .T. ) ;
+#317 = LINE ( 'NONE', #9, #114 ) ;
+#318 = VERTEX_POINT ( 'NONE', #170 ) ;
+#319 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3538012884994662400, -2.775590551181102800 ) ) ;
+#320 = AXIS2_PLACEMENT_3D ( 'NONE', #911, #487, #67 ) ;
+#321 = AXIS2_PLACEMENT_3D ( 'NONE', #255, #790, #329 ) ;
+#322 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#323 = ADVANCED_FACE ( 'NONE', ( #558 ), #156, .F. ) ;
+#324 = CARTESIAN_POINT ( 'NONE',  ( -1.179974529415955400E-017, -0.6097068003104905200, -2.857708127465627500 ) ) ;
+#325 = AXIS2_PLACEMENT_3D ( 'NONE', #559, #119, #646 ) ;
+#326 = ORIENTED_EDGE ( 'NONE', *, *, #654, .T. ) ;
+#327 = AXIS2_PLACEMENT_3D ( 'NONE', #229, #117, #643 ) ;
+#328 = ORIENTED_EDGE ( 'NONE', *, *, #754, .T. ) ;
+#329 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 2.312964634635740700E-015, -1.000000000000000000 ) ) ;
+#330 = FACE_OUTER_BOUND ( 'NONE', #120, .T. ) ;
+#331 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, 0.0000000000000000000, -2.795275590551181500 ) ) ;
+#332 = VERTEX_POINT ( 'NONE', #483 ) ;
+#333 = AXIS2_PLACEMENT_3D ( 'NONE', #848, #412, #908 ) ;
+#334 = ORIENTED_EDGE ( 'NONE', *, *, #527, .F. ) ;
+#335 = LINE ( 'NONE', #347, #109 ) ;
+#336 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#337 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4824607055243142500, -2.716535433070866600 ) ) ;
+#338 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3538012884994662400, -2.913385826771655000 ) ) ;
+#339 = ORIENTED_EDGE ( 'NONE', *, *, #680, .F. ) ;
+#340 = AXIS2_PLACEMENT_3D ( 'NONE', #482, #62, #554 ) ;
+#341 = VERTEX_POINT ( 'NONE', #408 ) ;
+#342 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636448900, -0.5900217609404117000, -2.755905511811024100 ) ) ;
+#343 = LINE ( 'NONE', #914, #143 ) ;
+#344 = ORIENTED_EDGE ( 'NONE', *, *, #536, .F. ) ;
+#345 = VECTOR ( 'NONE', #878, 39.37007874015748100 ) ;
+#346 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5900217609404117000, -2.854330708661417600 ) ) ;
+#347 = CARTESIAN_POINT ( 'NONE',  ( -4.730269911220782200, -0.3538012884994662400, -2.775590551181102800 ) ) ;
+#348 = SHAPE_DEFINITION_REPRESENTATION ( #576, #389 ) ;
+#349 = AXIS2_PLACEMENT_3D ( 'NONE', #63, #322, #846 ) ;
+#350 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#351 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636448900, -0.5900217609404117000, -2.775590551181102800 ) ) ;
+#352 = ORIENTED_EDGE ( 'NONE', *, *, #749, .F. ) ;
+#353 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#355 = EDGE_CURVE ( 'NONE', #894, #142, #152, .T. ) ;
+#354 = CYLINDRICAL_SURFACE ( 'NONE', #453, 0.1181102362204725500 ) ;
+#356 = VECTOR ( 'NONE', #753, 39.37007874015748100 ) ;
+#357 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#358 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#359 = ORIENTED_EDGE ( 'NONE', *, *, #596, .T. ) ;
+#360 = VECTOR ( 'NONE', #906, 39.37007874015748100 ) ;
+#361 = AXIS2_PLACEMENT_3D ( 'NONE', #378, #885, #460 ) ;
+#362 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#363 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #747 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #34, #525, #94 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#364 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636448900, -0.3538012884994662400, -2.775590551181102800 ) ) ;
+#365 = ORIENTED_EDGE ( 'NONE', *, *, #541, .F. ) ;
+#366 = ORIENTED_EDGE ( 'NONE', *, *, #498, .T. ) ;
+#367 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#368 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #393 ), #363 ) ;
+#369 = CIRCLE ( 'NONE', #314, 0.07874015748031496000 ) ;
+#370 = ORIENTED_EDGE ( 'NONE', *, *, #514, .F. ) ;
+#371 = SURFACE_SIDE_STYLE ('',( #166 ) ) ;
+#372 = VECTOR ( 'NONE', #519, 39.37007874015748100 ) ;
+#373 = EDGE_CURVE ( 'NONE', #741, #66, #174, .T. ) ;
+#374 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#375 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199386400, -2.795275590551181500 ) ) ;
+#376 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #393 ) ) ;
+#377 = ORIENTED_EDGE ( 'NONE', *, *, #720, .F. ) ;
+#378 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199386400, -2.795275590551181500 ) ) ;
+#379 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#380 = VERTEX_POINT ( 'NONE', #855 ) ;
+#381 = CYLINDRICAL_SURFACE ( 'NONE', #220, 0.07874015748031496000 ) ;
+#382 = VECTOR ( 'NONE', #485, 39.37007874015748100 ) ;
+#383 = ADVANCED_FACE ( 'NONE', ( #157 ), #540, .T. ) ;
+#384 = AXIS2_PLACEMENT_3D ( 'NONE', #25, #601, #141 ) ;
+#385 = LINE ( 'NONE', #89, #201 ) ;
+#386 = AXIS2_PLACEMENT_3D ( 'NONE', #216, #763, #291 ) ;
+#387 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#388 = ORIENTED_EDGE ( 'NONE', *, *, #548, .T. ) ;
+#389 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Rod_Left_3', ( #574, #175 ), #227 ) ;
+#390 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#391 = ORIENTED_EDGE ( 'NONE', *, *, #708, .F. ) ;
+#392 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.755905511811024100 ) ) ;
+#393 = STYLED_ITEM ( 'NONE', ( #526 ), #574 ) ;
+#394 = CARTESIAN_POINT ( 'NONE',  ( -5.070653821105214100, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#395 = VERTEX_POINT ( 'NONE', #125 ) ;
+#396 = VERTEX_POINT ( 'NONE', #657 ) ;
+#397 = PLANE ( 'NONE',  #44 ) ;
+#398 = AXIS2_PLACEMENT_3D ( 'NONE', #204, #19, #279 ) ;
+#399 = ORIENTED_EDGE ( 'NONE', *, *, #520, .T. ) ;
+#400 = AXIS2_PLACEMENT_3D ( 'NONE', #284, #814, #362 ) ;
+#401 = CIRCLE ( 'NONE', #405, 0.003377418804209652500 ) ;
+#402 = ORIENTED_EDGE ( 'NONE', *, *, #764, .F. ) ;
+#403 = CARTESIAN_POINT ( 'NONE',  ( -4.952543584884741000, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#404 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -4.212598425196852700 ) ) ;
+#405 = AXIS2_PLACEMENT_3D ( 'NONE', #515, #90, #597 ) ;
+#406 = ADVANCED_FACE ( 'NONE', ( #913 ), #567, .F. ) ;
+#407 = ORIENTED_EDGE ( 'NONE', *, *, #740, .T. ) ;
+#408 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4824607055243142500, -2.795275590551181500 ) ) ;
+#409 = CYLINDRICAL_SURFACE ( 'NONE', #81, 0.01968503937007875700 ) ;
+#410 = CIRCLE ( 'NONE', #333, 0.05905511811023620600 ) ;
+#411 = VECTOR ( 'NONE', #22, 39.37007874015748100 ) ;
+#412 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#413 = ADVANCED_FACE ( 'NONE', ( #752 ), #858, .F. ) ;
+#414 = AXIS2_PLACEMENT_3D ( 'NONE', #813, #358, #871 ) ;
+#415 = ORIENTED_EDGE ( 'NONE', *, *, #623, .T. ) ;
+#416 = CARTESIAN_POINT ( 'NONE',  ( -1.289190551993210200E-016, -0.4719115247199395200, -2.795275590551181500 ) ) ;
+#417 = AXIS2_PLACEMENT_3D ( 'NONE', #579, #270, #801 ) ;
+#418 = AXIS2_PLACEMENT_3D ( 'NONE', #78, #582, #131 ) ;
+#419 = ORIENTED_EDGE ( 'NONE', *, *, #724, .T. ) ;
+#420 = EDGE_LOOP ( 'NONE', ( #84, #463, #365, #795 ) ) ;
+#421 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4613623439155637400, -2.716535433070866600 ) ) ;
+#422 = ORIENTED_EDGE ( 'NONE', *, *, #739, .F. ) ;
+#423 = EDGE_LOOP ( 'NONE', ( #32, #675, #87, #503 ) ) ;
+#424 = DIRECTION ( 'NONE',  ( -3.469446951953614200E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#425 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4719115247199389700, -2.795275590551181500 ) ) ;
+#426 = CIRCLE ( 'NONE', #400, 0.2362204724409445500 ) ;
+#427 = PRESENTATION_STYLE_ASSIGNMENT (( #706 ) ) ;
+#428 = ORIENTED_EDGE ( 'NONE', *, *, #479, .F. ) ;
+#429 = PLANE ( 'NONE',  #417 ) ;
+#430 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#431 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #186, #734 ) ;
+#432 = ORIENTED_EDGE ( 'NONE', *, *, #548, .F. ) ;
+#433 = AXIS2_PLACEMENT_3D ( 'NONE', #796, #793, #6 ) ;
+#434 = FACE_OUTER_BOUND ( 'NONE', #3, .T. ) ;
+#435 = FACE_OUTER_BOUND ( 'NONE', #628, .T. ) ;
+#436 = CARTESIAN_POINT ( 'NONE',  ( -4.952543584884741000, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#437 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3931713672396237000, -2.857708127465626200 ) ) ;
+#438 = LINE ( 'NONE', #870, #411 ) ;
+#439 = AXIS2_PLACEMENT_3D ( 'NONE', #663, #192, #737 ) ;
+#440 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#441 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3538012884994662400, -2.913385826771654100 ) ) ;
+#442 = AXIS2_PLACEMENT_3D ( 'NONE', #182, #732, #265 ) ;
+#443 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, 0.0000000000000000000, -2.952755905511811600 ) ) ;
+#444 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300700, -0.4824607055243142500, -2.795275590551181500 ) ) ;
+#445 = ORIENTED_EDGE ( 'NONE', *, *, #769, .F. ) ;
+#446 = AXIS2_PLACEMENT_3D ( 'NONE', #278, #336, #2 ) ;
+#447 = VERTEX_POINT ( 'NONE', #338 ) ;
+#448 = VERTEX_POINT ( 'NONE', #571 ) ;
+#449 = VECTOR ( 'NONE', #867, 39.37007874015748100 ) ;
+#450 = DIRECTION ( 'NONE',  ( 2.312964634635737100E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#451 = AXIS2_PLACEMENT_3D ( 'NONE', #324, #719, #784 ) ;
+#452 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#453 = AXIS2_PLACEMENT_3D ( 'NONE', #404, #904, #57 ) ;
+#454 = EDGE_LOOP ( 'NONE', ( #165, #209, #202, #151 ) ) ;
+#455 = VERTEX_POINT ( 'NONE', #425 ) ;
+#456 = CIRCLE ( 'NONE', #361, 0.01054918080437465200 ) ;
+#457 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#458 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#459 = VECTOR ( 'NONE', #662, 39.37007874015748100 ) ;
+#460 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#461 = ADVANCED_FACE ( 'NONE', ( #895 ), #516, .F. ) ;
+#462 = LINE ( 'NONE', #145, #644 ) ;
+#463 = ORIENTED_EDGE ( 'NONE', *, *, #373, .F. ) ;
+#464 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #730, #263 ) ;
+#465 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3734863278695450000, -2.755905511811024100 ) ) ;
+#466 = ORIENTED_EDGE ( 'NONE', *, *, #661, .F. ) ;
+#467 = ORIENTED_EDGE ( 'NONE', *, *, #760, .F. ) ;
+#469 = VERTEX_POINT ( 'NONE', #499 ) ;
+#468 = AXIS2_PLACEMENT_3D ( 'NONE', #56, #167, #715 ) ;
+#470 = AXIS2_PLACEMENT_3D ( 'NONE', #552, #116, #636 ) ;
+#471 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#472 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#473 = LINE ( 'NONE', #743, #629 ) ;
+#474 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199386400, -2.716535433070866600 ) ) ;
+#475 = AXIS2_PLACEMENT_3D ( 'NONE', #711, #901, #476 ) ;
+#476 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#477 = VERTEX_POINT ( 'NONE', #267 ) ;
+#478 = ORIENTED_EDGE ( 'NONE', *, *, #606, .F. ) ;
+#479 = EDGE_CURVE ( 'NONE', #676, #557, #727, .T. ) ;
+#480 = VECTOR ( 'NONE', #736, 39.37007874015748100 ) ;
+#481 = EDGE_CURVE ( 'NONE', #894, #30, #137, .T. ) ;
+#482 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3734863278695450000, -2.775590551181102800 ) ) ;
+#483 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, -2.857708127465627500 ) ) ;
+#484 = ADVANCED_FACE ( 'NONE', ( #310, #874 ), #429, .T. ) ;
+#485 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.731847993664263200E-016, 0.0000000000000000000 ) ) ;
+#486 = EDGE_CURVE ( 'NONE', #741, #448, #492, .T. ) ;
+#487 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#488 = ORIENTED_EDGE ( 'NONE', *, *, #566, .F. ) ;
+#489 = EDGE_LOOP ( 'NONE', ( #43, #155, #301, #55 ) ) ;
+#490 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#491 = AXIS2_PLACEMENT_3D ( 'NONE', #474, #244, #899 ) ;
+#492 = CIRCLE ( 'NONE', #418, 0.05905511811023627500 ) ;
+#493 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#494 = CYLINDRICAL_SURFACE ( 'NONE', #206, 0.1181102362204725500 ) ;
+#495 = ORIENTED_EDGE ( 'NONE', *, *, #583, .T. ) ;
+#496 = ORIENTED_EDGE ( 'NONE', *, *, #694, .F. ) ;
+#497 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.512633316146487800 ) ) ;
+#498 = EDGE_CURVE ( 'NONE', #257, #281, #335, .T. ) ;
+#499 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.3931713672396237000, -2.755905511811024100 ) ) ;
+#500 = EDGE_CURVE ( 'NONE', #48, #332, #709, .T. ) ;
+#501 = EDGE_LOOP ( 'NONE', ( #723, #5, #670, #195 ) ) ;
+#502 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#503 = ORIENTED_EDGE ( 'NONE', *, *, #509, .F. ) ;
+#504 = CIRCLE ( 'NONE', #283, 0.1181102362204720100 ) ;
+#505 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#506 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#507 = EDGE_CURVE ( 'NONE', #257, #256, #287, .T. ) ;
+#508 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#509 = EDGE_CURVE ( 'NONE', #676, #72, #230, .T. ) ;
+#510 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#511 = EDGE_LOOP ( 'NONE', ( #860, #756, #108, #907, #445, #112, #326 ) ) ;
+#512 = ORIENTED_EDGE ( 'NONE', *, *, #507, .F. ) ;
+#513 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#514 = EDGE_CURVE ( 'NONE', #30, #136, #92, .T. ) ;
+#515 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, -2.854330708661417600 ) ) ;
+#516 = TOROIDAL_SURFACE ( 'NONE', #431, 0.01054918080437490700, 0.07874015748031496000 ) ;
+#517 = EDGE_CURVE ( 'NONE', #256, #142, #856, .T. ) ;
+#518 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#519 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#520 = EDGE_CURVE ( 'NONE', #573, #447, #658, .T. ) ;
+#521 = FILL_AREA_STYLE_COLOUR ( '', #738 ) ;
+#522 = ORIENTED_EDGE ( 'NONE', *, *, #481, .F. ) ;
+#523 = LINE ( 'NONE', #70, #716 ) ;
+#524 = ORIENTED_EDGE ( 'NONE', *, *, #729, .F. ) ;
+#525 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#526 = PRESENTATION_STYLE_ASSIGNMENT (( #880 ) ) ;
+#527 = EDGE_CURVE ( 'NONE', #447, #750, #473, .T. ) ;
+#528 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#529 = EDGE_CURVE ( 'NONE', #469, #16, #242, .T. ) ;
+#530 = ADVANCED_FACE ( 'NONE', ( #818 ), #603, .F. ) ;
+#531 = CARTESIAN_POINT ( 'NONE',  ( 4.073012111157524400E-019, -0.5900217609404117000, -2.795275590551181500 ) ) ;
+#532 = EDGE_LOOP ( 'NONE', ( #868, #133, #366, #564 ) ) ;
+#533 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.4719115247199391300, -2.952755905511811600 ) ) ;
+#534 = EDGE_CURVE ( 'NONE', #281, #693, #215, .T. ) ;
+#535 = ORIENTED_EDGE ( 'NONE', *, *, #583, .F. ) ;
+#536 = EDGE_CURVE ( 'NONE', #318, #76, #426, .T. ) ;
+#537 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, -2.850953289857210300 ) ) ;
+#538 = FACE_OUTER_BOUND ( 'NONE', #239, .T. ) ;
+#539 = VERTEX_POINT ( 'NONE', #444 ) ;
+#540 = CYLINDRICAL_SURFACE ( 'NONE', #446, 0.2362204724409445500 ) ;
+#541 = EDGE_CURVE ( 'NONE', #332, #741, #401, .T. ) ;
+#542 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#543 = CARTESIAN_POINT ( 'NONE',  ( -4.298767429372826900, -0.4719115247199386400, -2.795275590551181500 ) ) ;
+#544 = ORIENTED_EDGE ( 'NONE', *, *, #648, .T. ) ;
+#545 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#547 = ORIENTED_EDGE ( 'NONE', *, *, #688, .T. ) ;
+#546 = EDGE_CURVE ( 'NONE', #76, #281, #889, .T. ) ;
+#548 = EDGE_CURVE ( 'NONE', #887, #861, #188, .T. ) ;
+#549 = CIRCLE ( 'NONE', #300, 0.07874015748031496000 ) ;
+#550 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3538012884994662400, -2.795275590551182400 ) ) ;
+#551 = CYLINDRICAL_SURFACE ( 'NONE', #384, 0.05905511811023627500 ) ;
+#552 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3538012884994662400, -2.854330708661417600 ) ) ;
+#553 = EDGE_CURVE ( 'NONE', #76, #887, #33, .T. ) ;
+#554 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#555 = ADVANCED_FACE ( 'NONE', ( #11 ), #551, .F. ) ;
+#556 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, -2.850953289857208500 ) ) ;
+#557 = VERTEX_POINT ( 'NONE', #758 ) ;
+#558 = FACE_OUTER_BOUND ( 'NONE', #853, .T. ) ;
+#559 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.6097068003104905200, -2.857708127465627500 ) ) ;
+#560 = EDGE_CURVE ( 'NONE', #396, #72, #766, .T. ) ;
+#561 = CIRCLE ( 'NONE', #243, 0.01054918080437465200 ) ;
+#562 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#563 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #834, 'distance_accuracy_value', 'NONE');
+#564 = ORIENTED_EDGE ( 'NONE', *, *, #546, .F. ) ;
+#565 = EDGE_CURVE ( 'NONE', #900, #396, #797, .T. ) ;
+#566 = EDGE_CURVE ( 'NONE', #16, #96, #146, .T. ) ;
+#567 = PLANE ( 'NONE',  #442 ) ;
+#568 = ORIENTED_EDGE ( 'NONE', *, *, #764, .T. ) ;
+#569 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ;
+#570 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#571 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5900217609404117000, -2.795275590551181000 ) ) ;
+#572 = VECTOR ( 'NONE', #852, 39.37007874015748100 ) ;
+#573 = VERTEX_POINT ( 'NONE', #31 ) ;
+#574 = MANIFOLD_SOLID_BREP ( 'Stock-Trigger Plate_1_2-1', #762 ) ;
+#575 = EDGE_CURVE ( 'NONE', #900, #803, #903, .T. ) ;
+#576 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #172 ) ;
+#577 = VECTOR ( 'NONE', #450, 39.37007874015748100 ) ;
+#578 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#579 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.952755905511811600 ) ) ;
+#580 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#581 = EDGE_CURVE ( 'NONE', #469, #861, #462, .T. ) ;
+#582 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#583 = EDGE_CURVE ( 'NONE', #104, #665, #830, .T. ) ;
+#584 = ORIENTED_EDGE ( 'NONE', *, *, #591, .T. ) ;
+#585 = FACE_OUTER_BOUND ( 'NONE', #269, .T. ) ;
+#586 = CARTESIAN_POINT ( 'NONE',  ( -4.624458486195461400, -0.5802084970401950600, -2.757815009340386600 ) ) ;
+#587 = LINE ( 'NONE', #725, #163 ) ;
+#588 = VECTOR ( 'NONE', #282, 39.37007874015748100 ) ;
+#589 = EDGE_CURVE ( 'NONE', #676, #104, #252, .T. ) ;
+#590 = PLANE ( 'NONE',  #260 ) ;
+#591 = EDGE_CURVE ( 'NONE', #395, #50, #773, .T. ) ;
+#592 = ORIENTED_EDGE ( 'NONE', *, *, #566, .T. ) ;
+#593 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#594 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636448900, -0.3538012884994662400, -2.755905511811024100 ) ) ;
+#595 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#596 = EDGE_CURVE ( 'NONE', #96, #37, #456, .T. ) ;
+#597 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#598 = ORIENTED_EDGE ( 'NONE', *, *, #724, .F. ) ;
+#599 = ORIENTED_EDGE ( 'NONE', *, *, #12, .F. ) ;
+#600 = PLANE ( 'NONE',  #228 ) ;
+#601 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.206969255606346500E-016 ) ) ;
+#602 = EDGE_CURVE ( 'NONE', #477, #395, #825, .T. ) ;
+#603 = CYLINDRICAL_SURFACE ( 'NONE', #398, 0.07874015748031502900 ) ;
+#604 = EDGE_CURVE ( 'NONE', #665, #448, #79, .T. ) ;
+#605 = ORIENTED_EDGE ( 'NONE', *, *, #527, .T. ) ;
+#606 = EDGE_CURVE ( 'NONE', #104, #396, #249, .T. ) ;
+#607 = EDGE_CURVE ( 'NONE', #887, #257, #61, .T. ) ;
+#608 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#609 = ADVANCED_FACE ( 'NONE', ( #435 ), #882, .T. ) ;
+#610 = ORIENTED_EDGE ( 'NONE', *, *, #746, .T. ) ;
+#611 = TOROIDAL_SURFACE ( 'NONE', #491, 0.01054918080437490700, 0.07874015748031496000 ) ;
+#612 = CIRCLE ( 'NONE', #320, 0.05905511811023627500 ) ;
+#613 = LINE ( 'NONE', #443, #41 ) ;
+#614 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 2.586362690585028100E-018 ) ) ;
+#615 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#616 = EDGE_LOOP ( 'NONE', ( #780, #791 ) ) ;
+#617 = EDGE_CURVE ( 'NONE', #665, #66, #410, .T. ) ;
+#618 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#619 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3341162491293874800, -2.857708127465628000 ) ) ;
+#620 = FILL_AREA_STYLE ('',( #703 ) ) ;
+#621 = ORIENTED_EDGE ( 'NONE', *, *, #373, .T. ) ;
+#622 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4824607055243142500, -2.716535433070866600 ) ) ;
+#623 = EDGE_CURVE ( 'NONE', #48, #395, #806, .T. ) ;
+#624 = ORIENTED_EDGE ( 'NONE', *, *, #565, .T. ) ;
+#625 = EDGE_CURVE ( 'NONE', #447, #136, #197, .T. ) ;
+#626 = ORIENTED_EDGE ( 'NONE', *, *, #641, .F. ) ;
+#627 = CARTESIAN_POINT ( 'NONE',  ( 2.632984869330313400E-019, -0.6097068003104905200, -2.850953289857208500 ) ) ;
+#628 = EDGE_LOOP ( 'NONE', ( #843, #339, #782, #802, #624, #478, #495, #304, #547, #415, #584 ) ) ;
+#629 = VECTOR ( 'NONE', #200, 39.37007874015748100 ) ;
+#630 = PLANE ( 'NONE',  #475 ) ;
+#631 = SURFACE_STYLE_FILL_AREA ( #620 ) ;
+#632 = ORIENTED_EDGE ( 'NONE', *, *, #708, .T. ) ;
+#633 = EDGE_CURVE ( 'NONE', #653, #256, #612, .T. ) ;
+#634 = PLANE ( 'NONE',  #468 ) ;
+#635 = ORIENTED_EDGE ( 'NONE', *, *, #517, .T. ) ;
+#636 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#638 = EDGE_CURVE ( 'NONE', #455, #844, #787, .T. ) ;
+#637 = FACE_BOUND ( 'NONE', #616, .T. ) ;
+#639 = VECTOR ( 'NONE', #827, 39.37007874015748100 ) ;
+#640 = ADVANCED_FACE ( 'NONE', ( #39 ), #184, .F. ) ;
+#641 = EDGE_CURVE ( 'NONE', #844, #380, #781, .T. ) ;
+#642 = VECTOR ( 'NONE', #15, 39.37007874015748100 ) ;
+#643 = DIRECTION ( 'NONE',  ( -2.312964634635737100E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#644 = VECTOR ( 'NONE', #767, 39.37007874015748100 ) ;
+#645 = ORIENTED_EDGE ( 'NONE', *, *, #633, .F. ) ;
+#646 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#647 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#648 = EDGE_CURVE ( 'NONE', #37, #380, #587, .T. ) ;
+#649 = EDGE_CURVE ( 'NONE', #539, #341, #29, .T. ) ;
+#650 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.6097068003104905200, -2.854330708661417600 ) ) ;
+#651 = ORIENTED_EDGE ( 'NONE', *, *, #712, .F. ) ;
+#652 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3931713672396237000, -2.850953289857209900 ) ) ;
+#653 = VERTEX_POINT ( 'NONE', #652 ) ;
+#654 = EDGE_CURVE ( 'NONE', #539, #455, #343, .T. ) ;
+#655 = EDGE_LOOP ( 'NONE', ( #488, #280, #259, #831 ) ) ;
+#656 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#657 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5703367215703329900, -2.755905511811024100 ) ) ;
+#658 = LINE ( 'NONE', #441, #73 ) ;
+#659 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636448900, -0.5900217609404117000, -2.775590551181102800 ) ) ;
+#660 = EDGE_CURVE ( 'NONE', #37, #469, #369, .T. ) ;
+#661 = EDGE_CURVE ( 'NONE', #477, #332, #902, .T. ) ;
+#662 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#663 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, -2.854330708661417600 ) ) ;
+#664 = ORIENTED_EDGE ( 'NONE', *, *, #638, .F. ) ;
+#665 = VERTEX_POINT ( 'NONE', #262 ) ;
+#666 = EDGE_CURVE ( 'NONE', #539, #900, #549, .T. ) ;
+#667 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#668 = CIRCLE ( 'NONE', #275, 0.1181102362204720100 ) ;
+#669 = EDGE_CURVE ( 'NONE', #861, #380, #7, .T. ) ;
+#670 = ORIENTED_EDGE ( 'NONE', *, *, #52, .F. ) ;
+#671 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#672 = CARTESIAN_POINT ( 'NONE',  ( -4.619694921210810700, -0.5703367215703331100, -2.755905511811024100 ) ) ;
+#673 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#674 = EDGE_CURVE ( 'NONE', #844, #835, #735, .T. ) ;
+#675 = ORIENTED_EDGE ( 'NONE', *, *, #606, .T. ) ;
+#676 = VERTEX_POINT ( 'NONE', #659 ) ;
+#677 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#678 = CARTESIAN_POINT ( 'NONE',  ( -4.619694921210810700, -0.3734863278695449400, -2.755905511811024100 ) ) ;
+#679 = ORIENTED_EDGE ( 'NONE', *, *, #293, .T. ) ;
+#680 = EDGE_CURVE ( 'NONE', #455, #772, #523, .T. ) ;
+#681 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#682 = CARTESIAN_POINT ( 'NONE',  ( -4.624437500645607100, -0.3636537184640191200, -2.757779988907223900 ) ) ;
+#683 = EDGE_CURVE ( 'NONE', #714, #704, #881, .T. ) ;
+#684 = VECTOR ( 'NONE', #194, 39.37007874015748100 ) ;
+#685 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #305 );
+#686 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199386400, -2.755905511811024100 ) ) ;
+#687 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5703367215703329900, -2.755905511811024100 ) ) ;
+#688 = EDGE_CURVE ( 'NONE', #66, #48, #317, .T. ) ;
+#689 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, -2.775590551181102800 ) ) ;
+#690 = ORIENTED_EDGE ( 'NONE', *, *, #729, .T. ) ;
+#691 = ORIENTED_EDGE ( 'NONE', *, *, #713, .F. ) ;
+#692 = LINE ( 'NONE', #273, #459 ) ;
+#693 = VERTEX_POINT ( 'NONE', #191 ) ;
+#694 = EDGE_CURVE ( 'NONE', #448, #477, #294, .T. ) ;
+#695 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#696 = ORIENTED_EDGE ( 'NONE', *, *, #500, .T. ) ;
+#697 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#698 = EDGE_CURVE ( 'NONE', #704, #240, #864, .T. ) ;
+#699 = ADVANCED_FACE ( 'NONE', ( #97 ), #272, .F. ) ;
+#700 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#701 = EDGE_CURVE ( 'NONE', #211, #240, #504, .T. ) ;
+#702 = EDGE_CURVE ( 'NONE', #714, #211, #692, .T. ) ;
+#703 = FILL_AREA_STYLE_COLOUR ( '', #819 ) ;
+#704 = VERTEX_POINT ( 'NONE', #436 ) ;
+#705 = ORIENTED_EDGE ( 'NONE', *, *, #680, .T. ) ;
+#706 = SURFACE_STYLE_USAGE ( .BOTH. , #158 ) ;
+#707 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#708 = EDGE_CURVE ( 'NONE', #704, #714, #668, .T. ) ;
+#709 = LINE ( 'NONE', #863, #684 ) ;
+#710 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5900217609404117000, -2.775590551181102800 ) ) ;
+#711 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3931713672396237000, -2.854330708661417600 ) ) ;
+#712 = EDGE_CURVE ( 'NONE', #557, #68, #845, .T. ) ;
+#713 = EDGE_CURVE ( 'NONE', #653, #136, #250, .T. ) ;
+#714 = VERTEX_POINT ( 'NONE', #18 ) ;
+#715 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.731847993664263200E-016, 0.0000000000000000000 ) ) ;
+#716 = VECTOR ( 'NONE', #4, 39.37007874015748100 ) ;
+#717 = ADVANCED_FACE ( 'NONE', ( #226 ), #590, .T. ) ;
+#718 = EDGE_CURVE ( 'NONE', #318, #68, #64, .T. ) ;
+#719 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#720 = EDGE_CURVE ( 'NONE', #240, #211, #826, .T. ) ;
+#721 = ORIENTED_EDGE ( 'NONE', *, *, #575, .T. ) ;
+#722 = CARTESIAN_POINT ( 'NONE',  ( -4.366958406048768300, -0.4824607055243142500, -2.795275590551181500 ) ) ;
+#723 = ORIENTED_EDGE ( 'NONE', *, *, #666, .F. ) ;
+#724 = EDGE_CURVE ( 'NONE', #693, #750, #438, .T. ) ;
+#725 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4613623439155640200, -2.795275590551181500 ) ) ;
+#726 = ORIENTED_EDGE ( 'NONE', *, *, #713, .T. ) ;
+#727 = LINE ( 'NONE', #342, #123 ) ;
+#728 = DIRECTION ( 'NONE',  ( -2.312964634635737100E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#729 = EDGE_CURVE ( 'NONE', #750, #835, #613, .T. ) ;
+#730 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#731 = FACE_OUTER_BOUND ( 'NONE', #489, .T. ) ;
+#732 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#733 = ORIENTED_EDGE ( 'NONE', *, *, #355, .F. ) ;
+#734 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#735 = LINE ( 'NONE', #497, #129 ) ;
+#736 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#737 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#738 = COLOUR_RGB ( '',0.003921568627450980300, 0.2352941176470588200, 0.8235294117647058400 ) ;
+#739 = EDGE_CURVE ( 'NONE', #835, #772, #807, .T. ) ;
+#740 = EDGE_CURVE ( 'NONE', #772, #50, #789, .T. ) ;
+#741 = VERTEX_POINT ( 'NONE', #751 ) ;
+#742 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#743 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300200, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#744 = ORIENTED_EDGE ( 'NONE', *, *, #718, .F. ) ;
+#745 = ORIENTED_EDGE ( 'NONE', *, *, #754, .F. ) ;
+#746 = EDGE_CURVE ( 'NONE', #653, #894, #385, .T. ) ;
+#747 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #34, 'distance_accuracy_value', 'NONE');
+#748 = FACE_OUTER_BOUND ( 'NONE', #121, .T. ) ;
+#749 = EDGE_CURVE ( 'NONE', #557, #50, #774, .T. ) ;
+#750 = VERTEX_POINT ( 'NONE', #595 ) ;
+#751 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, -2.850953289857208500 ) ) ;
+#752 = FACE_OUTER_BOUND ( 'NONE', #420, .T. ) ;
+#753 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#754 = EDGE_CURVE ( 'NONE', #68, #693, #910, .T. ) ;
+#755 = CARTESIAN_POINT ( 'NONE',  ( -4.628296631038915100, -0.3565455599585519200, -2.765212101903243600 ) ) ;
+#756 = ORIENTED_EDGE ( 'NONE', *, *, #641, .T. ) ;
+#757 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#758 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636448900, -0.5900217609404117000, -2.952755905511811600 ) ) ;
+#759 = ORIENTED_EDGE ( 'NONE', *, *, #607, .F. ) ;
+#760 = EDGE_CURVE ( 'NONE', #16, #803, #20, .T. ) ;
+#761 = VECTOR ( 'NONE', #490, 39.37007874015748100 ) ;
+#762 = CLOSED_SHELL ( 'NONE', ( #383, #171, #905, #296, #484, #461, #224, #699, #413, #640, #771, #828, #58, #406, #847, #100, #118, #323, #884, #555, #148, #530, #788, #717, #609, #251 ) ) ;
+#763 = DIRECTION ( 'NONE',  ( 1.224646799147353200E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#764 = EDGE_CURVE ( 'NONE', #72, #318, #153, .T. ) ;
+#765 = ORIENTED_EDGE ( 'NONE', *, *, #565, .F. ) ;
+#766 = LINE ( 'NONE', #687, #345 ) ;
+#767 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#768 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#769 = EDGE_CURVE ( 'NONE', #341, #96, #561, .T. ) ;
+#770 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.5506516822002542900, -2.755905511811024100 ) ) ;
+#771 = ADVANCED_FACE ( 'NONE', ( #748 ), #600, .T. ) ;
+#772 = VERTEX_POINT ( 'NONE', #822 ) ;
+#773 = LINE ( 'NONE', #608, #65 ) ;
+#774 = LINE ( 'NONE', #681, #356 ) ;
+#775 = ORIENTED_EDGE ( 'NONE', *, *, #507, .T. ) ;
+#776 =( CONVERSION_BASED_UNIT ( 'INCH', #189 ) LENGTH_UNIT ( ) NAMED_UNIT ( #792 ) );
+#777 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#778 = ORIENTED_EDGE ( 'NONE', *, *, #604, .F. ) ;
+#779 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3931713672396237000, -2.857708127465627500 ) ) ;
+#780 = ORIENTED_EDGE ( 'NONE', *, *, #701, .T. ) ;
+#781 = LINE ( 'NONE', #331, #572 ) ;
+#782 = ORIENTED_EDGE ( 'NONE', *, *, #654, .F. ) ;
+#783 = VECTOR ( 'NONE', #876, 39.37007874015748100 ) ;
+#784 = DIRECTION ( 'NONE',  ( -1.241454091480813700E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#785 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ;
+#786 = FACE_OUTER_BOUND ( 'NONE', #823, .T. ) ;
+#787 = LINE ( 'NONE', #416, #382 ) ;
+#788 = ADVANCED_FACE ( 'NONE', ( #330 ), #381, .F. ) ;
+#789 = LINE ( 'NONE', #872, #176 ) ;
+#790 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#791 = ORIENTED_EDGE ( 'NONE', *, *, #720, .T. ) ;
+#792 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#793 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#794 = ORIENTED_EDGE ( 'NONE', *, *, #293, .F. ) ;
+#795 = ORIENTED_EDGE ( 'NONE', *, *, #500, .F. ) ;
+#796 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, -2.854330708661417600 ) ) ;
+#797 = LINE ( 'NONE', #289, #577 ) ;
+#798 = EDGE_LOOP ( 'NONE', ( #59, #838, #185, #621 ) ) ;
+#799 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#800 = CARTESIAN_POINT ( 'NONE',  ( -4.952543584884741000, -0.4719115247199389700, -4.212598425196852700 ) ) ;
+#801 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#802 = ORIENTED_EDGE ( 'NONE', *, *, #666, .T. ) ;
+#803 = VERTEX_POINT ( 'NONE', #770 ) ;
+#804 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#805 = FACE_OUTER_BOUND ( 'NONE', #173, .T. ) ;
+#806 = CIRCLE ( 'NONE', #325, 0.05905511811023620600 ) ;
+#807 = LINE ( 'NONE', #203, #588 ) ;
+#808 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3931713672396237000, -2.854330708661417600 ) ) ;
+#809 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3538012884994662400, -2.795275590551181500 ) ) ;
+#810 = VECTOR ( 'NONE', #35, 39.37007874015748100 ) ;
+#811 = ORIENTED_EDGE ( 'NONE', *, *, #479, .T. ) ;
+#812 = CARTESIAN_POINT ( 'NONE',  ( -5.070653821105214100, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#813 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199386400, -2.755905511811024100 ) ) ;
+#814 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#815 = ORIENTED_EDGE ( 'NONE', *, *, #625, .T. ) ;
+#816 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ;
+#817 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636449800, -0.3538012884994662400, -2.772818179781839600 ) ) ;
+#818 = FACE_OUTER_BOUND ( 'NONE', #501, .T. ) ;
+#819 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#820 = ORIENTED_EDGE ( 'NONE', *, *, #633, .T. ) ;
+#821 = FILL_AREA_STYLE ('',( #521 ) ) ;
+#822 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.4719115247199389700, -2.952755905511811600 ) ) ;
+#823 = EDGE_LOOP ( 'NONE', ( #912, #592, #359, #253 ) ) ;
+#824 = FACE_OUTER_BOUND ( 'NONE', #511, .T. ) ;
+#825 = LINE ( 'NONE', #298, #639 ) ;
+#826 = CIRCLE ( 'NONE', #266, 0.1181102362204720100 ) ;
+#827 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#828 = ADVANCED_FACE ( 'NONE', ( #538 ), #896, .T. ) ;
+#829 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#830 = LINE ( 'NONE', #374, #232 ) ;
+#831 = ORIENTED_EDGE ( 'NONE', *, *, #769, .T. ) ;
+#832 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300200, -0.5506516822002542900, -2.755905511811024100 ) ) ;
+#833 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4613623439155637400, -2.795275590551181500 ) ) ;
+#834 =( CONVERSION_BASED_UNIT ( 'INCH', #685 ) LENGTH_UNIT ( ) NAMED_UNIT ( #562 ) );
+#835 = VERTEX_POINT ( 'NONE', #533 ) ;
+#836 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5506516822002542900, -2.857708127465627500 ) ) ;
+#837 = ORIENTED_EDGE ( 'NONE', *, *, #602, .T. ) ;
+#838 = ORIENTED_EDGE ( 'NONE', *, *, #604, .T. ) ;
+#839 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#840 = DIRECTION ( 'NONE',  ( -2.586362690585028100E-018, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#841 = VECTOR ( 'NONE', #508, 39.37007874015748100 ) ;
+#842 = CARTESIAN_POINT ( 'NONE',  ( -4.716323112443796500, -0.4719115247199389700, -2.755905511811024100 ) ) ;
+#843 = ORIENTED_EDGE ( 'NONE', *, *, #740, .F. ) ;
+#844 = VERTEX_POINT ( 'NONE', #40 ) ;
+#845 = CIRCLE ( 'NONE', #271, 0.2362204724409445500 ) ;
+#846 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#847 = ADVANCED_FACE ( 'NONE', ( #138 ), #312, .T. ) ;
+#848 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.6097068003104905200, -2.850953289857208500 ) ) ;
+#849 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#850 = ORIENTED_EDGE ( 'NONE', *, *, #520, .F. ) ;
+#851 = ORIENTED_EDGE ( 'NONE', *, *, #536, .T. ) ;
+#852 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#853 = EDGE_LOOP ( 'NONE', ( #160, #696, #466, #837 ) ) ;
+#854 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#855 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.4613623439155638000, -2.795275590551181500 ) ) ;
+#856 = LINE ( 'NONE', #809, #449 ) ;
+#857 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.312964634635737100E-015, -0.0000000000000000000 ) ) ;
+#858 = PLANE ( 'NONE',  #433 ) ;
+#859 = PRODUCT ( 'Trigger_Rod_Left_3', 'Trigger_Rod_Left_3', '', ( #47 ) ) ;
+#860 = ORIENTED_EDGE ( 'NONE', *, *, #638, .T. ) ;
+#861 = VERTEX_POINT ( 'NONE', #101 ) ;
+#862 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#863 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, -2.857708127465628000 ) ) ;
+#864 = LINE ( 'NONE', #800, #480 ) ;
+#865 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#866 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#867 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -1.206969255606346500E-016 ) ) ;
+#868 = ORIENTED_EDGE ( 'NONE', *, *, #553, .T. ) ;
+#869 = EDGE_LOOP ( 'NONE', ( #422, #51, #664, #705 ) ) ;
+#870 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, -2.952755905511811600 ) ) ;
+#871 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#872 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894301300, -4.503561703872210400E-015, -2.952755905511811600 ) ) ;
+#873 = CARTESIAN_POINT ( 'NONE',  ( -4.621996116226884300, -0.3684657130795495100, -2.755905511811024500 ) ) ;
+#874 = FACE_OUTER_BOUND ( 'NONE', #21, .T. ) ;
+#875 = CYLINDRICAL_SURFACE ( 'NONE', #208, 0.05905511811023627500 ) ;
+#876 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#877 = ORIENTED_EDGE ( 'NONE', *, *, #683, .F. ) ;
+#878 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#879 = ORIENTED_EDGE ( 'NONE', *, *, #529, .F. ) ;
+#880 = SURFACE_STYLE_USAGE ( .BOTH. , #371 ) ;
+#881 = CIRCLE ( 'NONE', #290, 0.1181102362204720100 ) ;
+#882 = PLANE ( 'NONE',  #327 ) ;
+#883 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#884 = ADVANCED_FACE ( 'NONE', ( #891 ), #875, .F. ) ;
+#885 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#886 = ORIENTED_EDGE ( 'NONE', *, *, #581, .T. ) ;
+#887 = VERTEX_POINT ( 'NONE', #465 ) ;
+#888 = ORIENTED_EDGE ( 'NONE', *, *, #12, .T. ) ;
+#889 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #678, #873, #682, #210, #755, #286, #817, #364 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 4 ),
+ ( 1.734723475976807100E-018, 0.0004148735250276584000, 0.0006223102875415016200, 0.0008297470500553448900 ),
+ .UNSPECIFIED. ) ;
+#890 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#891 = FACE_OUTER_BOUND ( 'NONE', #86, .T. ) ;
+#892 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#893 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894300000, -0.5506516822002542900, -2.850953289857208500 ) ) ;
+#894 = VERTEX_POINT ( 'NONE', #537 ) ;
+#895 = FACE_OUTER_BOUND ( 'NONE', #655, .T. ) ;
+#896 = CYLINDRICAL_SURFACE ( 'NONE', #217, 0.2362204724409445500 ) ;
+#897 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#898 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3734863278695450000, -2.775590551181102800 ) ) ;
+#899 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#900 = VERTEX_POINT ( 'NONE', #832 ) ;
+#901 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#902 = CIRCLE ( 'NONE', #307, 0.05905511811023627500 ) ;
+#903 = LINE ( 'NONE', #93, #83 ) ;
+#904 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#905 = ADVANCED_FACE ( 'NONE', ( #731 ), #494, .F. ) ;
+#906 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -2.586362690585028100E-018 ) ) ;
+#907 = ORIENTED_EDGE ( 'NONE', *, *, #596, .F. ) ;
+#908 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 9.251858538542973800E-015 ) ) ;
+#909 = ORIENTED_EDGE ( 'NONE', *, *, #712, .T. ) ;
+#910 = CIRCLE ( 'NONE', #258, 0.2362204724409445500 ) ;
+#911 = CARTESIAN_POINT ( 'NONE',  ( -1.447094925894300700, -0.3341162491293874800, -2.850953289857209900 ) ) ;
+#912 = ORIENTED_EDGE ( 'NONE', *, *, #529, .T. ) ;
+#913 = FACE_OUTER_BOUND ( 'NONE', #164, .T. ) ;
+#914 = CARTESIAN_POINT ( 'NONE',  ( -1.947094925894301300, -4.503561703872210400E-015, -2.795275590551181500 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Trigger_Rod_Right_2.step

@@ -0,0 +1,838 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trigger_Rod_Right_2.step',
+    '2014-05-14T06:09:31',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = DIRECTION ( 'NONE',  ( 2.253954366339571700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#2 = FACE_OUTER_BOUND ( 'NONE', #364, .T. ) ;
+#3 = LINE ( 'NONE', #483, #515 ) ;
+#4 = VERTEX_POINT ( 'NONE', #536 ) ;
+#5 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3931713672396237000, 0.09842519685039372000 ) ) ;
+#6 = VERTEX_POINT ( 'NONE', #113 ) ;
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #600, .T. ) ;
+#8 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3341162491293874800, 0.09504777804618523600 ) ) ;
+#9 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5703367215703329900, 0.0000000000000000000 ) ) ;
+#10 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#11 = LINE ( 'NONE', #506, #127 ) ;
+#12 = VECTOR ( 'NONE', #216, 39.37007874015748100 ) ;
+#13 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.4688193074009112100, -1.264173228346457100 ) ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #514, .F. ) ;
+#16 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#17 = ORIENTED_EDGE ( 'NONE', *, *, #443, .T. ) ;
+#18 = VERTEX_POINT ( 'NONE', #51 ) ;
+#19 = VERTEX_POINT ( 'NONE', #190 ) ;
+#20 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#21 = SHAPE_DEFINITION_REPRESENTATION ( #83, #362 ) ;
+#22 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#23 = LINE ( 'NONE', #73, #343 ) ;
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #439, .T. ) ;
+#25 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#26 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.6097068003104905200, 0.1018026156546035000 ) ) ;
+#27 = EDGE_LOOP ( 'NONE', ( #487, #245, #655, #698, #471, #24, #227, #172 ) ) ;
+#28 = DIRECTION ( 'NONE',  ( -2.253954366339571700E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#29 = SURFACE_STYLE_FILL_AREA ( #385 ) ;
+#30 = ORIENTED_EDGE ( 'NONE', *, *, #552, .T. ) ;
+#31 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#32 = VECTOR ( 'NONE', #357, 39.37007874015748100 ) ;
+#33 = VECTOR ( 'NONE', #635, 39.37007874015748100 ) ;
+#34 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795807100, 4.626927462700386900E-015, 0.1968503937007874100 ) ) ;
+#35 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#36 = ORIENTED_EDGE ( 'NONE', *, *, #489, .T. ) ;
+#37 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, 0.09504777804618486100 ) ) ;
+#38 = ORIENTED_EDGE ( 'NONE', *, *, #562, .T. ) ;
+#39 = VERTEX_POINT ( 'NONE', #129 ) ;
+#40 = VECTOR ( 'NONE', #333, 39.37007874015748100 ) ;
+#41 = VERTEX_POINT ( 'NONE', #662 ) ;
+#42 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#43 = ORIENTED_EDGE ( 'NONE', *, *, #417, .T. ) ;
+#44 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3931713672396237000, 0.09842519685039372000 ) ) ;
+#45 = ADVANCED_FACE ( 'NONE', ( #819 ), #804, .F. ) ;
+#46 = LINE ( 'NONE', #34, #722 ) ;
+#47 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ;
+#48 =( CONVERSION_BASED_UNIT ( 'INCH', #58 ) LENGTH_UNIT ( ) NAMED_UNIT ( #715 ) );
+#49 = LINE ( 'NONE', #797, #197 ) ;
+#50 = ADVANCED_FACE ( 'NONE', ( #510 ), #467, .T. ) ;
+#51 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5506516822002542900, 0.1018026156546035100 ) ) ;
+#52 = VECTOR ( 'NONE', #153, 39.37007874015748100 ) ;
+#53 = FILL_AREA_STYLE_COLOUR ( '', #817 ) ;
+#54 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#55 = ORIENTED_EDGE ( 'NONE', *, *, #454, .T. ) ;
+#56 = ORIENTED_EDGE ( 'NONE', *, *, #475, .F. ) ;
+#57 = ORIENTED_EDGE ( 'NONE', *, *, #603, .F. ) ;
+#58 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #446 );
+#59 = LINE ( 'NONE', #267, #40 ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #437, .F. ) ;
+#61 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#62 = CYLINDRICAL_SURFACE ( 'NONE', #312, 0.05905511811023622700 ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #591, .F. ) ;
+#64 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#65 = PLANE ( 'NONE',  #339 ) ;
+#66 = LINE ( 'NONE', #793, #744 ) ;
+#67 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.156482317317871700E-015, 1.000000000000000000 ) ) ;
+#68 = CIRCLE ( 'NONE', #255, 0.01968503937007875700 ) ;
+#69 = DIRECTION ( 'NONE',  ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#70 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#71 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#72 = VERTEX_POINT ( 'NONE', #194 ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( 6.403715421571246200E-017, -0.4688193074009115400, 0.03937007874015748000 ) ) ;
+#74 = ORIENTED_EDGE ( 'NONE', *, *, #392, .T. ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #386, .F. ) ;
+#76 = SURFACE_STYLE_FILL_AREA ( #759 ) ;
+#77 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#78 = CIRCLE ( 'NONE', #298, 0.05905511811023620600 ) ;
+#79 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#80 = FACE_OUTER_BOUND ( 'NONE', #578, .T. ) ;
+#81 = VERTEX_POINT ( 'NONE', #263 ) ;
+#82 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.734723475976807500E-015 ) ) ;
+#83 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #111 ) ;
+#84 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3734863278695450000, 0.0000000000000000000 ) ) ;
+#85 = VECTOR ( 'NONE', #629, 39.37007874015748100 ) ;
+#86 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#87 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.4688193074009112100, 0.03937007874015748000 ) ) ;
+#88 = EDGE_LOOP ( 'NONE', ( #416, #619, #63, #180 ) ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5703367215703329900, 0.0000000000000000000 ) ) ;
+#90 = PRESENTATION_STYLE_ASSIGNMENT (( #810 ) ) ;
+#91 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#92 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#93 = EDGE_LOOP ( 'NONE', ( #7, #492, #434, #742 ) ) ;
+#94 = FACE_OUTER_BOUND ( 'NONE', #654, .T. ) ;
+#95 = VERTEX_POINT ( 'NONE', #665 ) ;
+#96 = PLANE ( 'NONE',  #187 ) ;
+#97 = PLANE ( 'NONE',  #176 ) ;
+#98 = LINE ( 'NONE', #739, #630 ) ;
+#99 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ;
+#100 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#101 = ADVANCED_FACE ( 'NONE', ( #679 ), #65, .F. ) ;
+#102 = ORIENTED_EDGE ( 'NONE', *, *, #503, .F. ) ;
+#103 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#104 = EDGE_LOOP ( 'NONE', ( #528, #160, #795, #167 ) ) ;
+#105 = FACE_OUTER_BOUND ( 'NONE', #350, .T. ) ;
+#106 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #182 ) ) ;
+#107 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #182, .NOT_KNOWN. ) ;
+#108 = CYLINDRICAL_SURFACE ( 'NONE', #324, 0.05905511811023622700 ) ;
+#109 = ORIENTED_EDGE ( 'NONE', *, *, #603, .T. ) ;
+#110 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#111 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #107, #114 ) ;
+#112 = AXIS2_PLACEMENT_3D ( 'NONE', #653, #246, #710 ) ;
+#113 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.5900217609404117000, 0.01968503937007872300 ) ) ;
+#114 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #765, 'design' ) ;
+#115 = CIRCLE ( 'NONE', #279, 0.05905511811023622700 ) ;
+#116 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3931713672396237600, 0.0000000000000000000 ) ) ;
+#117 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ;
+#118 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#119 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795807600, -0.5506516822002542900, 0.09842519685039372000 ) ) ;
+#120 = DIRECTION ( 'NONE',  ( -1.241454091480813400E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #463, .T. ) ;
+#122 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #204 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #525, #103, #597 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#123 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#124 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#125 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #138 ), #122 ) ;
+#126 = VERTEX_POINT ( 'NONE', #9 ) ;
+#127 = VECTOR ( 'NONE', #751, 39.37007874015748100 ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #381, .T. ) ;
+#129 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.4688193074009391900, 0.03937007874015748000 ) ) ;
+#130 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.1574803149606308600 ) ) ;
+#131 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -1.365923996832131400E-016, 0.0000000000000000000 ) ) ;
+#132 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #138 ) ) ;
+#133 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -1.365923996832131400E-016, 0.0000000000000000000 ) ) ;
+#134 = ORIENTED_EDGE ( 'NONE', *, *, #531, .T. ) ;
+#135 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#136 = FACE_OUTER_BOUND ( 'NONE', #88, .T. ) ;
+#137 = ORIENTED_EDGE ( 'NONE', *, *, #564, .F. ) ;
+#138 = STYLED_ITEM ( 'NONE', ( #821 ), #362 ) ;
+#139 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#140 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #450 );
+#141 = CIRCLE ( 'NONE', #285, 0.05905511811023620600 ) ;
+#142 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204192900, -4.388890002657899800E-015, 0.03937007874015748000 ) ) ;
+#143 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.3931713672396239800, 0.0000000000000000000 ) ) ;
+#144 = CLOSED_SHELL ( 'NONE', ( #304, #101, #310, #184, #813, #648, #706, #45, #593, #518, #768, #447, #645, #50, #809, #522, #170, #374, #380, #589, #242, #760, #237, #762 ) ) ;
+#145 = AXIS2_PLACEMENT_3D ( 'NONE', #173, #383, #812 ) ;
+#146 = DIRECTION ( 'NONE',  ( 2.253954366339571700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3538012884994662400, 0.1574803149606299200 ) ) ;
+#148 = VERTEX_POINT ( 'NONE', #543 ) ;
+#149 = PLANE ( 'NONE',  #239 ) ;
+#150 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#151 = AXIS2_PLACEMENT_3D ( 'NONE', #588, #236, #306 ) ;
+#152 = LINE ( 'NONE', #37, #502 ) ;
+#153 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#155 = VECTOR ( 'NONE', #424, 39.37007874015748100 ) ;
+#156 = ORIENTED_EDGE ( 'NONE', *, *, #401, .F. ) ;
+#157 = VECTOR ( 'NONE', #61, 39.37007874015748100 ) ;
+#158 = AXIS2_PLACEMENT_3D ( 'NONE', #668, #268, #730 ) ;
+#159 = VERTEX_POINT ( 'NONE', #400 ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #425, .T. ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.4688193074009112700, 0.03937007874015748000 ) ) ;
+#162 = CYLINDRICAL_SURFACE ( 'NONE', #151, 0.07874015748031496000 ) ;
+#163 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #527 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #595, #175, #651 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#164 = LINE ( 'NONE', #621, #326 ) ;
+#165 = PLANE ( 'NONE',  #195 ) ;
+#166 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #675 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #48, #519, #100 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#167 = ORIENTED_EDGE ( 'NONE', *, *, #532, .F. ) ;
+#168 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#169 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #178 ), #166 ) ;
+#170 = ADVANCED_FACE ( 'NONE', ( #136 ), #108, .F. ) ;
+#171 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #178 ) ) ;
+#172 = ORIENTED_EDGE ( 'NONE', *, *, #549, .T. ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994943300, -1.264173228346457100 ) ) ;
+#174 = VECTOR ( 'NONE', #228, 39.37007874015748100 ) ;
+#175 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#176 = AXIS2_PLACEMENT_3D ( 'NONE', #44, #373, #168 ) ;
+#177 = LINE ( 'NONE', #687, #524 ) ;
+#178 = STYLED_ITEM ( 'NONE', ( #90 ), #800 ) ;
+#179 = ORIENTED_EDGE ( 'NONE', *, *, #404, .F. ) ;
+#180 = ORIENTED_EDGE ( 'NONE', *, *, #537, .F. ) ;
+#181 = EDGE_LOOP ( 'NONE', ( #711, #555, #121, #212 ) ) ;
+#182 = PRODUCT ( 'Trigger_Rod_Right_2', 'Trigger_Rod_Right_2', '', ( #317 ) ) ;
+#183 = FACE_OUTER_BOUND ( 'NONE', #311, .T. ) ;
+#184 = ADVANCED_FACE ( 'NONE', ( #486 ), #198, .T. ) ;
+#185 = AXIS2_PLACEMENT_3D ( 'NONE', #71, #548, #124 ) ;
+#186 = FACE_OUTER_BOUND ( 'NONE', #213, .T. ) ;
+#187 = AXIS2_PLACEMENT_3D ( 'NONE', #644, #808, #444 ) ;
+#188 = ORIENTED_EDGE ( 'NONE', *, *, #521, .T. ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.4824607055243142500, -0.03937007874015748000 ) ) ;
+#190 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.4688193074009391900, 0.1968503937007874100 ) ) ;
+#191 = ORIENTED_EDGE ( 'NONE', *, *, #489, .F. ) ;
+#192 = CIRCLE ( 'NONE', #302, 0.01968503937007875700 ) ;
+#193 = ORIENTED_EDGE ( 'NONE', *, *, #552, .F. ) ;
+#194 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4613623439155638000, 0.03937007874015748000 ) ) ;
+#195 = AXIS2_PLACEMENT_3D ( 'NONE', #640, #233, #702 ) ;
+#196 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#197 = VECTOR ( 'NONE', #35, 39.37007874015748100 ) ;
+#198 = PLANE ( 'NONE',  #260 ) ;
+#199 = LINE ( 'NONE', #421, #358 ) ;
+#200 = AXIS2_PLACEMENT_3D ( 'NONE', #369, #755, #42 ) ;
+#201 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#202 = EDGE_LOOP ( 'NONE', ( #60, #601, #541, #535 ) ) ;
+#203 = ORIENTED_EDGE ( 'NONE', *, *, #526, .T. ) ;
+#204 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #525, 'distance_accuracy_value', 'NONE');
+#205 = ORIENTED_EDGE ( 'NONE', *, *, #392, .F. ) ;
+#206 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3341162491293874800, 0.1018026156546029500 ) ) ;
+#207 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, 0.0000000000000000000, 0.1968503937007874100 ) ) ;
+#208 = AXIS2_PLACEMENT_3D ( 'NONE', #508, #92, #583 ) ;
+#209 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3931713672396237000, 0.09842519685039372000 ) ) ;
+#210 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#211 = CIRCLE ( 'NONE', #284, 0.05905511811023622700 ) ;
+#212 = ORIENTED_EDGE ( 'NONE', *, *, #569, .T. ) ;
+#213 = EDGE_LOOP ( 'NONE', ( #758, #712, #36, #805 ) ) ;
+#214 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4613623439155638000, -0.03937007874015748000 ) ) ;
+#215 = LINE ( 'NONE', #772, #377 ) ;
+#216 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #482, .T. ) ;
+#218 = AXIS2_PLACEMENT_3D ( 'NONE', #229, #367, #803 ) ;
+#219 = AXIS2_PLACEMENT_3D ( 'NONE', #294, #360, #154 ) ;
+#220 = VECTOR ( 'NONE', #572, 39.37007874015748100 ) ;
+#221 = FACE_OUTER_BOUND ( 'NONE', #181, .T. ) ;
+#222 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#223 = AXIS2_PLACEMENT_3D ( 'NONE', #222, #225, #694 ) ;
+#224 = VERTEX_POINT ( 'NONE', #473 ) ;
+#225 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#226 = ORIENTED_EDGE ( 'NONE', *, *, #505, .T. ) ;
+#227 = ORIENTED_EDGE ( 'NONE', *, *, #503, .T. ) ;
+#228 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -2.586362690585028100E-018 ) ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#230 = VECTOR ( 'NONE', #726, 39.37007874015748100 ) ;
+#231 = ORIENTED_EDGE ( 'NONE', *, *, #549, .F. ) ;
+#232 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#233 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#234 = CIRCLE ( 'NONE', #307, 0.07874015748031496000 ) ;
+#235 = EDGE_LOOP ( 'NONE', ( #38, #55, #137, #617 ) ) ;
+#236 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#237 = ADVANCED_FACE ( 'NONE', ( #656 ), #728, .F. ) ;
+#238 = AXIS2_PLACEMENT_3D ( 'NONE', #26, #490, #82 ) ;
+#239 = AXIS2_PLACEMENT_3D ( 'NONE', #691, #796, #429 ) ;
+#240 = VECTOR ( 'NONE', #28, 39.37007874015748100 ) ;
+#241 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.4688193074009112100, 0.1968503937007874100 ) ) ;
+#242 = ADVANCED_FACE ( 'NONE', ( #785 ), #407, .F. ) ;
+#243 = ORIENTED_EDGE ( 'NONE', *, *, #408, .T. ) ;
+#244 = AXIS2_PLACEMENT_3D ( 'NONE', #488, #135, #683 ) ;
+#245 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ;
+#246 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#247 = ORIENTED_EDGE ( 'NONE', *, *, #397, .T. ) ;
+#248 = ORIENTED_EDGE ( 'NONE', *, *, #542, .F. ) ;
+#249 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#250 = AXIS2_PLACEMENT_3D ( 'NONE', #428, #495, #86 ) ;
+#251 = LINE ( 'NONE', #123, #395 ) ;
+#252 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.4613623439155639100, 0.03937007874015748000 ) ) ;
+#253 = ORIENTED_EDGE ( 'NONE', *, *, #514, .T. ) ;
+#254 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#255 = AXIS2_PLACEMENT_3D ( 'NONE', #288, #747, #356 ) ;
+#256 = VECTOR ( 'NONE', #736, 39.37007874015748100 ) ;
+#257 = VERTEX_POINT ( 'NONE', #778 ) ;
+#258 = DIRECTION ( 'NONE',  ( 3.469446951953614200E-015, -1.000000000000000000, 8.673617379884035500E-016 ) ) ;
+#259 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3341162491293874800, 0.09504777804618487500 ) ) ;
+#260 = AXIS2_PLACEMENT_3D ( 'NONE', #265, #69, #776 ) ;
+#261 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#262 = LINE ( 'NONE', #142, #240 ) ;
+#263 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.5900217609404117000, 0.1574803149606303600 ) ) ;
+#264 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#265 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4688193074009391300, -1.264173228346457100 ) ) ;
+#266 = AXIS2_PLACEMENT_3D ( 'NONE', #286, #745, #352 ) ;
+#267 = CARTESIAN_POINT ( 'NONE',  ( 6.403715421571620900E-017, -0.4688193074009389100, 0.03937007874015748000 ) ) ;
+#268 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#269 = VERTEX_POINT ( 'NONE', #616 ) ;
+#270 = AXIS2_PLACEMENT_3D ( 'NONE', #214, #686, #282 ) ;
+#271 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#272 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.1574803149606307800 ) ) ;
+#273 = AXIS2_PLACEMENT_3D ( 'NONE', #788, #418, #25 ) ;
+#274 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.156482317317871300E-015, 1.000000000000000000 ) ) ;
+#275 = DIRECTION ( 'NONE',  ( -2.586362690585027800E-018, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#276 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3341162491293874800, 0.1018026156546034400 ) ) ;
+#277 = LINE ( 'NONE', #678, #299 ) ;
+#278 = VERTEX_POINT ( 'NONE', #671 ) ;
+#279 = AXIS2_PLACEMENT_3D ( 'NONE', #560, #139, #626 ) ;
+#280 = AXIS2_PLACEMENT_3D ( 'NONE', #729, #13, #476 ) ;
+#281 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#282 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 8.673617379884035500E-016, 1.000000000000000000 ) ) ;
+#283 = VECTOR ( 'NONE', #784, 39.37007874015748100 ) ;
+#284 = AXIS2_PLACEMENT_3D ( 'NONE', #206, #677, #274 ) ;
+#285 = AXIS2_PLACEMENT_3D ( 'NONE', #276, #738, #342 ) ;
+#286 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191100, -0.4824607055243142500, -0.03937007874015748000 ) ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( -4.730269911220782200, -0.3538012884994662400, 0.01968503937007874000 ) ) ;
+#288 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5703367215703329900, 0.01968503937007872300 ) ) ;
+#289 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, 0.1018026156546038000 ) ) ;
+#290 = ORIENTED_EDGE ( 'NONE', *, *, #600, .F. ) ;
+#291 = ORIENTED_EDGE ( 'NONE', *, *, #391, .T. ) ;
+#292 = AXIS2_PLACEMENT_3D ( 'NONE', #472, #70, #546 ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #461, .T. ) ;
+#294 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3341162491293874800, 0.1018026156546025800 ) ) ;
+#295 = VECTOR ( 'NONE', #91, 39.37007874015748100 ) ;
+#296 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 2.586362690585028100E-018 ) ) ;
+#297 = AXIS2_PLACEMENT_3D ( 'NONE', #612, #196, #667 ) ;
+#298 = AXIS2_PLACEMENT_3D ( 'NONE', #8, #468, #67 ) ;
+#299 = VECTOR ( 'NONE', #133, 39.37007874015748100 ) ;
+#300 = ORIENTED_EDGE ( 'NONE', *, *, #420, .T. ) ;
+#301 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808900, -0.5506516822002542900, 0.1018026156546030100 ) ) ;
+#302 = AXIS2_PLACEMENT_3D ( 'NONE', #465, #64, #538 ) ;
+#303 = LINE ( 'NONE', #209, #789 ) ;
+#304 = ADVANCED_FACE ( 'NONE', ( #320 ), #478, .F. ) ;
+#305 = VERTEX_POINT ( 'NONE', #335 ) ;
+#306 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#307 = AXIS2_PLACEMENT_3D ( 'NONE', #189, #660, #258 ) ;
+#308 = AXIS2_PLACEMENT_3D ( 'NONE', #682, #624, #499 ) ;
+#309 = PLANE ( 'NONE',  #145 ) ;
+#310 = ADVANCED_FACE ( 'NONE', ( #94 ), #674, .F. ) ;
+#311 = EDGE_LOOP ( 'NONE', ( #354, #607, #554, #15 ) ) ;
+#312 = AXIS2_PLACEMENT_3D ( 'NONE', #558, #484, #275 ) ;
+#313 = ORIENTED_EDGE ( 'NONE', *, *, #594, .F. ) ;
+#314 = LINE ( 'NONE', #696, #295 ) ;
+#315 = AXIS2_PLACEMENT_3D ( 'NONE', #533, #110, #604 ) ;
+#316 = VECTOR ( 'NONE', #353, 39.37007874015748100 ) ;
+#317 = PRODUCT_CONTEXT ( 'NONE', #763, 'mechanical' ) ;
+#318 = VERTEX_POINT ( 'NONE', #618 ) ;
+#319 = AXIS2_PLACEMENT_3D ( 'NONE', #409, #732, #337 ) ;
+#320 = FACE_OUTER_BOUND ( 'NONE', #643, .T. ) ;
+#321 = ORIENTED_EDGE ( 'NONE', *, *, #532, .T. ) ;
+#322 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3734863278695450000, 0.01968503937007874000 ) ) ;
+#323 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#324 = AXIS2_PLACEMENT_3D ( 'NONE', #469, #613, #120 ) ;
+#325 = AXIS2_PLACEMENT_3D ( 'NONE', #322, #769, #394 ) ;
+#326 = VECTOR ( 'NONE', #16, 39.37007874015748100 ) ;
+#327 = VERTEX_POINT ( 'NONE', #481 ) ;
+#328 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#329 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.4688193074009112700, -1.264173228346457100 ) ) ;
+#330 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #551, #131 ) ;
+#331 = EDGE_LOOP ( 'NONE', ( #393, #205, #634, #387 ) ) ;
+#332 = FACE_OUTER_BOUND ( 'NONE', #235, .T. ) ;
+#333 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 1.365923996832131400E-016, 0.0000000000000000000 ) ) ;
+#334 = LINE ( 'NONE', #493, #708 ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808900, -0.5506516822002542900, 0.09504777804618487500 ) ) ;
+#336 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 1.365923996832131400E-016, 0.0000000000000000000 ) ) ;
+#337 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#338 = VERTEX_POINT ( 'NONE', #272 ) ;
+#339 = AXIS2_PLACEMENT_3D ( 'NONE', #329, #775, #403 ) ;
+#340 = ORIENTED_EDGE ( 'NONE', *, *, #569, .F. ) ;
+#341 = VERTEX_POINT ( 'NONE', #413 ) ;
+#342 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.156482317317871700E-015, 1.000000000000000000 ) ) ;
+#343 = VECTOR ( 'NONE', #336, 39.37007874015748100 ) ;
+#344 = AXIS2_PLACEMENT_3D ( 'NONE', #773, #539, #118 ) ;
+#345 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#346 = EDGE_LOOP ( 'NONE', ( #432, #614, #365, #794 ) ) ;
+#347 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204192900, -4.388890002657899800E-015, 0.1968503937007874100 ) ) ;
+#348 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, 0.09504777804618606800 ) ) ;
+#349 = VECTOR ( 'NONE', #689, 39.37007874015748100 ) ;
+#350 = EDGE_LOOP ( 'NONE', ( #587, #579, #378, #253, #724, #628, #203, #134, #321, #764, #695 ) ) ;
+#351 = AXIS2_PLACEMENT_3D ( 'NONE', #259, #720, #328 ) ;
+#352 = DIRECTION ( 'NONE',  ( 3.469446951953614200E-015, -1.000000000000000000, 8.673617379884035500E-016 ) ) ;
+#353 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#354 = ORIENTED_EDGE ( 'NONE', *, *, #580, .F. ) ;
+#355 = VECTOR ( 'NONE', #501, 39.37007874015748100 ) ;
+#356 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#357 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#358 = VECTOR ( 'NONE', #281, 39.37007874015748100 ) ;
+#359 = EDGE_CURVE ( 'NONE', #752, #95, #642, .T. ) ;
+#360 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#361 = ORIENTED_EDGE ( 'NONE', *, *, #494, .T. ) ;
+#362 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Rod_Right_2', ( #800, #112 ), #163 ) ;
+#363 = ORIENTED_EDGE ( 'NONE', *, *, #454, .F. ) ;
+#364 = EDGE_LOOP ( 'NONE', ( #685, #625, #733, #56, #217, #777, #191, #361, #723, #102, #74 ) ) ;
+#365 = ORIENTED_EDGE ( 'NONE', *, *, #544, .F. ) ;
+#366 = EDGE_CURVE ( 'NONE', #811, #148, #277, .T. ) ;
+#367 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#368 = LINE ( 'NONE', #673, #716 ) ;
+#369 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4613623439155640200, -0.03937007874015748000 ) ) ;
+#370 = EDGE_CURVE ( 'NONE', #818, #811, #627, .T. ) ;
+#371 = VERTEX_POINT ( 'NONE', #783 ) ;
+#372 = EDGE_CURVE ( 'NONE', #577, #390, #757, .T. ) ;
+#373 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#374 = ADVANCED_FACE ( 'NONE', ( #458 ), #62, .F. ) ;
+#375 = VERTEX_POINT ( 'NONE', #210 ) ;
+#376 = EDGE_LOOP ( 'NONE', ( #399, #340, #293, #786, #226, #507, #820, #650 ) ) ;
+#377 = VECTOR ( 'NONE', #659, 39.37007874015748100 ) ;
+#378 = ORIENTED_EDGE ( 'NONE', *, *, #509, .F. ) ;
+#379 = SURFACE_SIDE_STYLE ('',( #76 ) ) ;
+#380 = ADVANCED_FACE ( 'NONE', ( #80 ), #586, .T. ) ;
+#381 = EDGE_CURVE ( 'NONE', #752, #371, #741, .T. ) ;
+#382 = LINE ( 'NONE', #289, #355 ) ;
+#383 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#384 = CIRCLE ( 'NONE', #238, 0.05905511811023620600 ) ;
+#385 = FILL_AREA_STYLE ('',( #53 ) ) ;
+#386 = EDGE_CURVE ( 'NONE', #95, #390, #419, .T. ) ;
+#387 = ORIENTED_EDGE ( 'NONE', *, *, #456, .T. ) ;
+#388 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #765 ) ;
+#389 = VERTEX_POINT ( 'NONE', #714 ) ;
+#390 = VERTEX_POINT ( 'NONE', #252 ) ;
+#391 = EDGE_CURVE ( 'NONE', #148, #690, #46, .T. ) ;
+#392 = EDGE_CURVE ( 'NONE', #771, #341, #441, .T. ) ;
+#393 = ORIENTED_EDGE ( 'NONE', *, *, #453, .F. ) ;
+#394 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#395 = VECTOR ( 'NONE', #264, 39.37007874015748100 ) ;
+#396 = ORIENTED_EDGE ( 'NONE', *, *, #366, .T. ) ;
+#397 = EDGE_CURVE ( 'NONE', #318, #676, #215, .T. ) ;
+#398 = VECTOR ( 'NONE', #254, 39.37007874015748100 ) ;
+#399 = ORIENTED_EDGE ( 'NONE', *, *, #370, .F. ) ;
+#400 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.5900217609404117000, 0.03937007874015752800 ) ) ;
+#401 = EDGE_CURVE ( 'NONE', #318, #553, #234, .T. ) ;
+#402 = LINE ( 'NONE', #497, #220 ) ;
+#403 = DIRECTION ( 'NONE',  ( 2.253954366339571700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#404 = EDGE_CURVE ( 'NONE', #553, #41, #566, .T. ) ;
+#405 = CIRCLE ( 'NONE', #244, 0.05905511811023620600 ) ;
+#406 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#407 = PLANE ( 'NONE',  #158 ) ;
+#408 = EDGE_CURVE ( 'NONE', #6, #41, #192, .T. ) ;
+#409 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3538012884994663500, -1.264173228346457100 ) ) ;
+#410 = EDGE_CURVE ( 'NONE', #6, #159, #540, .T. ) ;
+#411 = VERTEX_POINT ( 'NONE', #116 ) ;
+#412 = EDGE_LOOP ( 'NONE', ( #193, #43, #669, #442 ) ) ;
+#413 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4688193074009391300, 0.1968503937007874100 ) ) ;
+#414 = EDGE_CURVE ( 'NONE', #459, #257, #623, .T. ) ;
+#415 = LINE ( 'NONE', #119, #230 ) ;
+#416 = ORIENTED_EDGE ( 'NONE', *, *, #585, .F. ) ;
+#417 = EDGE_CURVE ( 'NONE', #459, #4, #78, .T. ) ;
+#418 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#419 = CIRCLE ( 'NONE', #315, 0.07874015748031496000 ) ;
+#420 = EDGE_CURVE ( 'NONE', #159, #305, #767, .T. ) ;
+#421 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#422 = VERTEX_POINT ( 'NONE', #664 ) ;
+#423 = DIRECTION ( 'NONE',  ( 2.253954366339571700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#424 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.206969255606346500E-016 ) ) ;
+#425 = EDGE_CURVE ( 'NONE', #305, #697, #415, .T. ) ;
+#426 = FACE_OUTER_BOUND ( 'NONE', #27, .T. ) ;
+#427 = EDGE_CURVE ( 'NONE', #697, #81, #602, .T. ) ;
+#428 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#429 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#430 = ORIENTED_EDGE ( 'NONE', *, *, #410, .F. ) ;
+#431 = EDGE_CURVE ( 'NONE', #81, #690, #753, .T. ) ;
+#432 = ORIENTED_EDGE ( 'NONE', *, *, #571, .T. ) ;
+#433 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#434 = ORIENTED_EDGE ( 'NONE', *, *, #594, .T. ) ;
+#435 = FACE_OUTER_BOUND ( 'NONE', #666, .T. ) ;
+#436 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#437 = EDGE_CURVE ( 'NONE', #371, #4, #251, .T. ) ;
+#438 = VECTOR ( 'NONE', #261, 39.37007874015748100 ) ;
+#439 = EDGE_CURVE ( 'NONE', #39, #771, #59, .T. ) ;
+#440 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.03937007874015836100 ) ) ;
+#441 = LINE ( 'NONE', #717, #398 ) ;
+#442 = ORIENTED_EDGE ( 'NONE', *, *, #482, .F. ) ;
+#443 = EDGE_CURVE ( 'NONE', #269, #818, #582, .T. ) ;
+#444 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#445 = LINE ( 'NONE', #347, #611 ) ;
+#446 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#447 = ADVANCED_FACE ( 'NONE', ( #186 ), #701, .T. ) ;
+#448 = EDGE_CURVE ( 'NONE', #577, #811, #368, .T. ) ;
+#449 = EDGE_CURVE ( 'NONE', #676, #577, #23, .T. ) ;
+#450 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#451 = VERTEX_POINT ( 'NONE', #130 ) ;
+#452 = SURFACE_STYLE_USAGE ( .BOTH. , #816 ) ;
+#453 = EDGE_CURVE ( 'NONE', #341, #19, #534, .T. ) ;
+#454 = EDGE_CURVE ( 'NONE', #269, #257, #211, .T. ) ;
+#455 = FACE_OUTER_BOUND ( 'NONE', #565, .T. ) ;
+#456 = EDGE_CURVE ( 'NONE', #39, #19, #164, .T. ) ;
+#457 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#458 = FACE_OUTER_BOUND ( 'NONE', #663, .T. ) ;
+#459 = VERTEX_POINT ( 'NONE', #735 ) ;
+#460 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ;
+#461 = EDGE_CURVE ( 'NONE', #375, #341, #807, .T. ) ;
+#462 = DIRECTION ( 'NONE',  ( 2.253954366339571700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#463 = EDGE_CURVE ( 'NONE', #338, #375, #3, .T. ) ;
+#464 = ORIENTED_EDGE ( 'NONE', *, *, #496, .F. ) ;
+#465 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.5703367215703329900, 0.01968503937007872300 ) ) ;
+#466 = CIRCLE ( 'NONE', #270, 0.07874015748031496000 ) ;
+#467 = PLANE ( 'NONE',  #344 ) ;
+#468 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#469 = CARTESIAN_POINT ( 'NONE',  ( -1.179974529415955400E-017, -0.6097068003104905200, 0.1018026156546032600 ) ) ;
+#470 = EDGE_CURVE ( 'NONE', #338, #327, #141, .T. ) ;
+#471 = ORIENTED_EDGE ( 'NONE', *, *, #509, .T. ) ;
+#472 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.6097068003104905200, 0.1018026156546030000 ) ) ;
+#473 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5506516822002542900, 0.09504777804618486100 ) ) ;
+#474 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ;
+#475 = EDGE_CURVE ( 'NONE', #680, #327, #303, .T. ) ;
+#476 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#477 = LINE ( 'NONE', #639, #780 ) ;
+#478 = PLANE ( 'NONE',  #330 ) ;
+#479 = ORIENTED_EDGE ( 'NONE', *, *, #437, .T. ) ;
+#480 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -1.365923996832131400E-016, 0.0000000000000000000 ) ) ;
+#481 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3931713672396237000, 0.1018026156546034400 ) ) ;
+#482 = EDGE_CURVE ( 'NONE', #680, #649, #115, .T. ) ;
+#483 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#484 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -2.586362690585028100E-018 ) ) ;
+#485 = EDGE_CURVE ( 'NONE', #705, #649, #491, .T. ) ;
+#486 = FACE_OUTER_BOUND ( 'NONE', #331, .T. ) ;
+#487 = ORIENTED_EDGE ( 'NONE', *, *, #372, .F. ) ;
+#488 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.6097068003104905200, 0.09504777804618487500 ) ) ;
+#489 = EDGE_CURVE ( 'NONE', #561, #705, #646, .T. ) ;
+#490 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#491 = LINE ( 'NONE', #22, #283 ) ;
+#492 = ORIENTED_EDGE ( 'NONE', *, *, #410, .T. ) ;
+#493 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3538012884994662400, 0.03937007874015751400 ) ) ;
+#494 = EDGE_CURVE ( 'NONE', #561, #411, #98, .T. ) ;
+#495 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#496 = EDGE_CURVE ( 'NONE', #411, #72, #466, .T. ) ;
+#497 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.3734863278695450000, 0.0000000000000000000 ) ) ;
+#498 = ORIENTED_EDGE ( 'NONE', *, *, #386, .T. ) ;
+#499 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#500 = ORIENTED_EDGE ( 'NONE', *, *, #564, .T. ) ;
+#501 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#502 = VECTOR ( 'NONE', #296, 39.37007874015748100 ) ;
+#503 = EDGE_CURVE ( 'NONE', #771, #72, #774, .T. ) ;
+#504 = LINE ( 'NONE', #791, #316 ) ;
+#505 = EDGE_CURVE ( 'NONE', #19, #511, #445, .T. ) ;
+#506 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, 0.01968503937007872300 ) ) ;
+#507 = ORIENTED_EDGE ( 'NONE', *, *, #608, .T. ) ;
+#508 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.4688193074009391900, -1.264173228346457100 ) ) ;
+#509 = EDGE_CURVE ( 'NONE', #389, #39, #262, .T. ) ;
+#510 = FACE_OUTER_BOUND ( 'NONE', #202, .T. ) ;
+#511 = VERTEX_POINT ( 'NONE', #790 ) ;
+#512 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3931713672396237000, 0.09504777804618572100 ) ) ;
+#513 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3734863278695450000, 0.0000000000000000000 ) ) ;
+#514 = EDGE_CURVE ( 'NONE', #389, #422, #746, .T. ) ;
+#515 = VECTOR ( 'NONE', #557, 39.37007874015748100 ) ;
+#516 = EDGE_CURVE ( 'NONE', #422, #126, #761, .T. ) ;
+#517 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4688193074009391300, 0.03937007874015748000 ) ) ;
+#518 = ADVANCED_FACE ( 'NONE', ( #221 ), #792, .T. ) ;
+#519 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#520 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ;
+#521 = EDGE_CURVE ( 'NONE', #278, #126, #68, .T. ) ;
+#522 = ADVANCED_FACE ( 'NONE', ( #426 ), #149, .T. ) ;
+#523 = LINE ( 'NONE', #638, #174 ) ;
+#524 = VECTOR ( 'NONE', #743, 39.37007874015748100 ) ;
+#525 =( CONVERSION_BASED_UNIT ( 'INCH', #658 ) LENGTH_UNIT ( ) NAMED_UNIT ( #323 ) );
+#526 = EDGE_CURVE ( 'NONE', #278, #657, #573, .T. ) ;
+#527 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #595, 'distance_accuracy_value', 'NONE');
+#528 = ORIENTED_EDGE ( 'NONE', *, *, #598, .T. ) ;
+#529 = ORIENTED_EDGE ( 'NONE', *, *, #581, .F. ) ;
+#530 = ORIENTED_EDGE ( 'NONE', *, *, #408, .F. ) ;
+#531 = EDGE_CURVE ( 'NONE', #657, #224, #405, .T. ) ;
+#532 = EDGE_CURVE ( 'NONE', #224, #18, #727, .T. ) ;
+#533 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.4613623439155639100, -0.03937007874015748000 ) ) ;
+#534 = LINE ( 'NONE', #781, #684 ) ;
+#535 = ORIENTED_EDGE ( 'NONE', *, *, #556, .F. ) ;
+#536 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3538012884994662400, 0.03937007874015788200 ) ) ;
+#537 = EDGE_CURVE ( 'NONE', #18, #451, #384, .T. ) ;
+#538 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#539 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#540 = LINE ( 'NONE', #719, #157 ) ;
+#541 = ORIENTED_EDGE ( 'NONE', *, *, #485, .T. ) ;
+#542 = EDGE_CURVE ( 'NONE', #451, #511, #199, .T. ) ;
+#543 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.4688193074009112700, 0.1968503937007874100 ) ) ;
+#544 = EDGE_CURVE ( 'NONE', #411, #95, #547, .T. ) ;
+#545 = VECTOR ( 'NONE', #433, 39.37007874015748100 ) ;
+#546 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.734723475976807500E-015 ) ) ;
+#547 = LINE ( 'NONE', #143, #12 ) ;
+#548 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#549 = EDGE_CURVE ( 'NONE', #72, #390, #177, .T. ) ;
+#550 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, 0.0000000000000000000, 0.1968503937007874100 ) ) ;
+#551 = DIRECTION ( 'NONE',  ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#552 = EDGE_CURVE ( 'NONE', #459, #680, #693, .T. ) ;
+#553 = VERTEX_POINT ( 'NONE', #740 ) ;
+#554 = ORIENTED_EDGE ( 'NONE', *, *, #581, .T. ) ;
+#555 = ORIENTED_EDGE ( 'NONE', *, *, #562, .F. ) ;
+#556 = EDGE_CURVE ( 'NONE', #4, #649, #334, .T. ) ;
+#557 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#558 = CARTESIAN_POINT ( 'NONE',  ( 2.632984869330313400E-019, -0.6097068003104905200, 0.09504777804618487500 ) ) ;
+#559 = VECTOR ( 'NONE', #201, 39.37007874015748100 ) ;
+#560 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3341162491293874800, 0.09504777804618572100 ) ) ;
+#561 = VERTEX_POINT ( 'NONE', #84 ) ;
+#562 = EDGE_CURVE ( 'NONE', #338, #269, #672, .T. ) ;
+#563 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, 0.0000000000000000000, 0.03937007874015748000 ) ) ;
+#564 = EDGE_CURVE ( 'NONE', #327, #257, #504, .T. ) ;
+#565 = EDGE_LOOP ( 'NONE', ( #713, #498, #231, #464 ) ) ;
+#566 = LINE ( 'NONE', #609, #704 ) ;
+#567 = EDGE_LOOP ( 'NONE', ( #529, #779, #109, #599 ) ) ;
+#568 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.206969255606346500E-016 ) ) ;
+#569 = EDGE_CURVE ( 'NONE', #375, #818, #66, .T. ) ;
+#570 = VECTOR ( 'NONE', #150, 39.37007874015748100 ) ;
+#571 = EDGE_CURVE ( 'NONE', #561, #752, #402, .T. ) ;
+#572 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#573 = LINE ( 'NONE', #574, #52 ) ;
+#574 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#575 = ORIENTED_EDGE ( 'NONE', *, *, #531, .F. ) ;
+#576 = EDGE_CURVE ( 'NONE', #371, #705, #725, .T. ) ;
+#577 = VERTEX_POINT ( 'NONE', #87 ) ;
+#578 = EDGE_LOOP ( 'NONE', ( #530, #290, #188, #57 ) ) ;
+#579 = ORIENTED_EDGE ( 'NONE', *, *, #456, .F. ) ;
+#580 = EDGE_CURVE ( 'NONE', #318, #389, #590, .T. ) ;
+#581 = EDGE_CURVE ( 'NONE', #553, #422, #49, .T. ) ;
+#582 = LINE ( 'NONE', #615, #559 ) ;
+#583 = DIRECTION ( 'NONE',  ( 2.253954366339571700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#584 = ORIENTED_EDGE ( 'NONE', *, *, #475, .T. ) ;
+#585 = EDGE_CURVE ( 'NONE', #697, #18, #382, .T. ) ;
+#586 = CYLINDRICAL_SURFACE ( 'NONE', #308, 0.01968503937007874000 ) ;
+#587 = ORIENTED_EDGE ( 'NONE', *, *, #505, .F. ) ;
+#588 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4824607055243142500, -0.03937007874015748000 ) ) ;
+#589 = ADVANCED_FACE ( 'NONE', ( #707 ), #636, .F. ) ;
+#590 = LINE ( 'NONE', #632, #32 ) ;
+#591 = EDGE_CURVE ( 'NONE', #451, #81, #692, .T. ) ;
+#592 = VECTOR ( 'NONE', #146, 39.37007874015748100 ) ;
+#593 = ADVANCED_FACE ( 'NONE', ( #332 ), #815, .F. ) ;
+#594 = EDGE_CURVE ( 'NONE', #159, #657, #523, .T. ) ;
+#595 =( CONVERSION_BASED_UNIT ( 'INCH', #140 ) LENGTH_UNIT ( ) NAMED_UNIT ( #457 ) );
+#596 = EDGE_LOOP ( 'NONE', ( #734, #520, #633, #248 ) ) ;
+#597 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#598 = EDGE_CURVE ( 'NONE', #224, #305, #152, .T. ) ;
+#599 = ORIENTED_EDGE ( 'NONE', *, *, #516, .F. ) ;
+#600 = EDGE_CURVE ( 'NONE', #278, #6, #11, .T. ) ;
+#601 = ORIENTED_EDGE ( 'NONE', *, *, #576, .T. ) ;
+#602 = CIRCLE ( 'NONE', #292, 0.05905511811023620600 ) ;
+#603 = EDGE_CURVE ( 'NONE', #41, #126, #670, .T. ) ;
+#604 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 8.673617379884035500E-016, 1.000000000000000000 ) ) ;
+#605 = EDGE_LOOP ( 'NONE', ( #291, #117, #99, #802, #731, #430, #243, #179, #156, #247, #756 ) ) ;
+#606 = VECTOR ( 'NONE', #79, 39.37007874015748100 ) ;
+#607 = ORIENTED_EDGE ( 'NONE', *, *, #401, .T. ) ;
+#608 = EDGE_CURVE ( 'NONE', #511, #690, #314, .T. ) ;
+#609 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795807100, 4.626927462700386900E-015, 0.0000000000000000000 ) ) ;
+#610 = EDGE_CURVE ( 'NONE', #676, #148, #477, .T. ) ;
+#611 = VECTOR ( 'NONE', #423, 39.37007874015748100 ) ;
+#612 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.6097068003104905200, 0.09504777804618487500 ) ) ;
+#613 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#614 = ORIENTED_EDGE ( 'NONE', *, *, #359, .T. ) ;
+#615 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#616 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3538012884994662400, 0.1574803149606303100 ) ) ;
+#617 = ORIENTED_EDGE ( 'NONE', *, *, #470, .F. ) ;
+#618 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808900, -0.4824607055243142500, 0.03937007874015748000 ) ) ;
+#619 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ;
+#620 = CYLINDRICAL_SURFACE ( 'NONE', #200, 0.07874015748031496000 ) ;
+#621 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.4688193074009391900, -1.264173228346457100 ) ) ;
+#622 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#623 = LINE ( 'NONE', #5, #438 ) ;
+#624 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#625 = ORIENTED_EDGE ( 'NONE', *, *, #463, .F. ) ;
+#626 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.156482317317871300E-015, 1.000000000000000000 ) ) ;
+#627 = LINE ( 'NONE', #207, #256 ) ;
+#628 = ORIENTED_EDGE ( 'NONE', *, *, #521, .F. ) ;
+#629 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#630 = VECTOR ( 'NONE', #345, 39.37007874015748100 ) ;
+#631 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5506516822002542900, 0.09842519685039372000 ) ) ;
+#632 = CARTESIAN_POINT ( 'NONE',  ( -4.366958406048768300, -0.4824607055243142500, 0.03937007874015748000 ) ) ;
+#633 = ORIENTED_EDGE ( 'NONE', *, *, #608, .F. ) ;
+#634 = ORIENTED_EDGE ( 'NONE', *, *, #439, .F. ) ;
+#635 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#636 = PLANE ( 'NONE',  #223 ) ;
+#637 = FACE_OUTER_BOUND ( 'NONE', #346, .T. ) ;
+#638 = CARTESIAN_POINT ( 'NONE',  ( 4.073012111157524400E-019, -0.5900217609404117000, 0.03937007874015751400 ) ) ;
+#639 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.4688193074009112700, -1.264173228346457100 ) ) ;
+#640 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, 0.09842519685039372000 ) ) ;
+#641 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ;
+#642 = LINE ( 'NONE', #77, #770 ) ;
+#643 = EDGE_LOOP ( 'NONE', ( #396, #748, #474, #47 ) ) ;
+#644 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1968503937007874100 ) ) ;
+#645 = ADVANCED_FACE ( 'NONE', ( #637 ), #801, .F. ) ;
+#646 = CIRCLE ( 'NONE', #273, 0.01968503937007874000 ) ;
+#647 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#648 = ADVANCED_FACE ( 'NONE', ( #105 ), #754, .T. ) ;
+#649 = VERTEX_POINT ( 'NONE', #440 ) ;
+#650 = ORIENTED_EDGE ( 'NONE', *, *, #366, .F. ) ;
+#651 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#652 = VECTOR ( 'NONE', #436, 39.37007874015748100 ) ;
+#653 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#654 = EDGE_LOOP ( 'NONE', ( #721, #641, #814, #75, #718, #128, #479, #787, #460, #363, #17 ) ) ;
+#655 = ORIENTED_EDGE ( 'NONE', *, *, #397, .F. ) ;
+#656 = FACE_OUTER_BOUND ( 'NONE', #596, .T. ) ;
+#657 = VERTEX_POINT ( 'NONE', #700 ) ;
+#658 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #54 );
+#659 = DIRECTION ( 'NONE',  ( -2.253954366339571700E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#660 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#661 = VECTOR ( 'NONE', #20, 39.37007874015748100 ) ;
+#662 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.5703367215703329900, 0.0000000000000000000 ) ) ;
+#663 = EDGE_LOOP ( 'NONE', ( #313, #300, #749, #575 ) ) ;
+#664 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191100, -0.5506516822002542900, 0.0000000000000000000 ) ) ;
+#665 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3931713672396238700, 0.0000000000000000000 ) ) ;
+#666 = EDGE_LOOP ( 'NONE', ( #750, #30, #584, #500 ) ) ;
+#667 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.734723475976807500E-015 ) ) ;
+#668 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#669 = ORIENTED_EDGE ( 'NONE', *, *, #556, .T. ) ;
+#670 = LINE ( 'NONE', #89, #652 ) ;
+#671 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.01968503937007872300 ) ) ;
+#672 = LINE ( 'NONE', #147, #349 ) ;
+#673 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.4688193074009112100, -1.264173228346457100 ) ) ;
+#674 = PLANE ( 'NONE',  #319 ) ;
+#675 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #48, 'distance_accuracy_value', 'NONE');
+#676 = VERTEX_POINT ( 'NONE', #161 ) ;
+#677 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#678 = CARTESIAN_POINT ( 'NONE',  ( 6.403715421571246200E-017, -0.4688193074009115400, 0.1968503937007874100 ) ) ;
+#679 = FACE_OUTER_BOUND ( 'NONE', #605, .T. ) ;
+#680 = VERTEX_POINT ( 'NONE', #512 ) ;
+#681 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#682 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5703367215703329900, 0.01968503937007872300 ) ) ;
+#683 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.734723475976807500E-015 ) ) ;
+#684 = VECTOR ( 'NONE', #480, 39.37007874015748100 ) ;
+#685 = ORIENTED_EDGE ( 'NONE', *, *, #461, .F. ) ;
+#686 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#687 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4613623439155640200, 0.03937007874015748000 ) ) ;
+#688 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204192900, -4.388890002657899800E-015, 0.0000000000000000000 ) ) ;
+#689 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#690 = VERTEX_POINT ( 'NONE', #232 ) ;
+#691 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.03937007874015748000 ) ) ;
+#692 = LINE ( 'NONE', #799, #545 ) ;
+#693 = LINE ( 'NONE', #348, #155 ) ;
+#694 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#695 = ORIENTED_EDGE ( 'NONE', *, *, #542, .T. ) ;
+#696 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#697 = VERTEX_POINT ( 'NONE', #301 ) ;
+#698 = ORIENTED_EDGE ( 'NONE', *, *, #580, .T. ) ;
+#699 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#700 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.03937007874015750800 ) ) ;
+#701 = CYLINDRICAL_SURFACE ( 'NONE', #280, 0.01968503937007874000 ) ;
+#702 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#703 = FILL_AREA_STYLE_COLOUR ( '', #249 ) ;
+#704 = VECTOR ( 'NONE', #462, 39.37007874015748100 ) ;
+#705 = VERTEX_POINT ( 'NONE', #806 ) ;
+#706 = ADVANCED_FACE ( 'NONE', ( #455 ), #620, .F. ) ;
+#707 = FACE_OUTER_BOUND ( 'NONE', #93, .T. ) ;
+#708 = VECTOR ( 'NONE', #568, 39.37007874015748100 ) ;
+#709 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #763 ) ;
+#710 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#711 = ORIENTED_EDGE ( 'NONE', *, *, #443, .F. ) ;
+#712 = ORIENTED_EDGE ( 'NONE', *, *, #571, .F. ) ;
+#713 = ORIENTED_EDGE ( 'NONE', *, *, #544, .T. ) ;
+#714 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204190900, -0.4824607055243142500, 0.03937007874015748000 ) ) ;
+#715 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#716 = VECTOR ( 'NONE', #271, 39.37007874015748100 ) ;
+#717 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4688193074009391300, -1.264173228346457100 ) ) ;
+#718 = ORIENTED_EDGE ( 'NONE', *, *, #359, .F. ) ;
+#719 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808500, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#720 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.206969255606346500E-016 ) ) ;
+#721 = ORIENTED_EDGE ( 'NONE', *, *, #370, .T. ) ;
+#722 = VECTOR ( 'NONE', #1, 39.37007874015748100 ) ;
+#723 = ORIENTED_EDGE ( 'NONE', *, *, #496, .T. ) ;
+#724 = ORIENTED_EDGE ( 'NONE', *, *, #516, .T. ) ;
+#725 = LINE ( 'NONE', #287, #570 ) ;
+#726 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#727 = LINE ( 'NONE', #631, #33 ) ;
+#728 = PLANE ( 'NONE',  #185 ) ;
+#729 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3734863278695450000, 0.01968503937007874000 ) ) ;
+#730 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#731 = ORIENTED_EDGE ( 'NONE', *, *, #420, .F. ) ;
+#732 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#733 = ORIENTED_EDGE ( 'NONE', *, *, #470, .T. ) ;
+#734 = ORIENTED_EDGE ( 'NONE', *, *, #591, .T. ) ;
+#735 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3931713672396237000, 0.09504777804618523600 ) ) ;
+#736 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#737 = VECTOR ( 'NONE', #10, 39.37007874015748100 ) ;
+#738 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#739 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#740 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795808900, -0.5506516822002542900, 0.0000000000000000000 ) ) ;
+#741 = CIRCLE ( 'NONE', #325, 0.01968503937007874000 ) ;
+#742 = ORIENTED_EDGE ( 'NONE', *, *, #526, .F. ) ;
+#743 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#744 = VECTOR ( 'NONE', #31, 39.37007874015748100 ) ;
+#745 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#746 = CIRCLE ( 'NONE', #266, 0.07874015748031496000 ) ;
+#747 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#748 = ORIENTED_EDGE ( 'NONE', *, *, #610, .F. ) ;
+#749 = ORIENTED_EDGE ( 'NONE', *, *, #598, .F. ) ;
+#750 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ;
+#751 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#752 = VERTEX_POINT ( 'NONE', #513 ) ;
+#753 = LINE ( 'NONE', #406, #737 ) ;
+#754 = PLANE ( 'NONE',  #208 ) ;
+#755 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#756 = ORIENTED_EDGE ( 'NONE', *, *, #610, .T. ) ;
+#757 = LINE ( 'NONE', #782, #606 ) ;
+#758 = ORIENTED_EDGE ( 'NONE', *, *, #381, .F. ) ;
+#759 = FILL_AREA_STYLE ('',( #703 ) ) ;
+#760 = ADVANCED_FACE ( 'NONE', ( #766 ), #165, .F. ) ;
+#761 = LINE ( 'NONE', #688, #592 ) ;
+#762 = ADVANCED_FACE ( 'NONE', ( #798 ), #96, .T. ) ;
+#763 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#764 = ORIENTED_EDGE ( 'NONE', *, *, #537, .T. ) ;
+#765 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#766 = FACE_OUTER_BOUND ( 'NONE', #104, .T. ) ;
+#767 = CIRCLE ( 'NONE', #297, 0.05905511811023620600 ) ;
+#768 = ADVANCED_FACE ( 'NONE', ( #435 ), #97, .T. ) ;
+#769 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#770 = VECTOR ( 'NONE', #622, 39.37007874015748100 ) ;
+#771 = VERTEX_POINT ( 'NONE', #517 ) ;
+#772 = CARTESIAN_POINT ( 'NONE',  ( 2.052804409795807100, 4.626927462700386900E-015, 0.03937007874015748000 ) ) ;
+#773 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#774 = LINE ( 'NONE', #563, #85 ) ;
+#775 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#776 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -1.365923996832131400E-016, 0.0000000000000000000 ) ) ;
+#777 = ORIENTED_EDGE ( 'NONE', *, *, #485, .F. ) ;
+#778 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3931713672396237000, 0.1018026156546029500 ) ) ;
+#779 = ORIENTED_EDGE ( 'NONE', *, *, #404, .T. ) ;
+#780 = VECTOR ( 'NONE', #699, 39.37007874015748100 ) ;
+#781 = CARTESIAN_POINT ( 'NONE',  ( 6.403715421571620900E-017, -0.4688193074009389100, 0.1968503937007874100 ) ) ;
+#782 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, 0.0000000000000000000, 0.03937007874015748000 ) ) ;
+#783 = CARTESIAN_POINT ( 'NONE',  ( 2.552804409795808500, -0.3538012884994662400, 0.01968503937007874000 ) ) ;
+#784 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#785 = FACE_OUTER_BOUND ( 'NONE', #567, .T. ) ;
+#786 = ORIENTED_EDGE ( 'NONE', *, *, #453, .T. ) ;
+#787 = ORIENTED_EDGE ( 'NONE', *, *, #417, .F. ) ;
+#788 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3734863278695450000, 0.01968503937007874000 ) ) ;
+#789 = VECTOR ( 'NONE', #681, 39.37007874015748100 ) ;
+#790 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#791 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3931713672396237000, 0.1018026156546025800 ) ) ;
+#792 = PLANE ( 'NONE',  #250 ) ;
+#793 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#794 = ORIENTED_EDGE ( 'NONE', *, *, #494, .F. ) ;
+#795 = ORIENTED_EDGE ( 'NONE', *, *, #585, .T. ) ;
+#796 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#797 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.5506516822002542900, 0.0000000000000000000 ) ) ;
+#798 = FACE_OUTER_BOUND ( 'NONE', #376, .T. ) ;
+#799 = CARTESIAN_POINT ( 'NONE',  ( -4.887614533388943000E-018, -0.5900217609404117000, 0.1574803149606306100 ) ) ;
+#800 = MANIFOLD_SOLID_BREP ( 'Stock-Trigger bar_1_2-1', #144 ) ;
+#801 = PLANE ( 'NONE',  #218 ) ;
+#802 = ORIENTED_EDGE ( 'NONE', *, *, #425, .F. ) ;
+#803 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#804 = CYLINDRICAL_SURFACE ( 'NONE', #351, 0.05905511811023622700 ) ;
+#805 = ORIENTED_EDGE ( 'NONE', *, *, #576, .F. ) ;
+#806 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.01968503937007874000 ) ) ;
+#807 = LINE ( 'NONE', #550, #661 ) ;
+#808 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#809 = ADVANCED_FACE ( 'NONE', ( #183 ), #162, .F. ) ;
+#810 = SURFACE_STYLE_USAGE ( .BOTH. , #379 ) ;
+#811 = VERTEX_POINT ( 'NONE', #241 ) ;
+#812 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#813 = ADVANCED_FACE ( 'NONE', ( #2 ), #309, .T. ) ;
+#814 = ORIENTED_EDGE ( 'NONE', *, *, #372, .T. ) ;
+#815 = CYLINDRICAL_SURFACE ( 'NONE', #219, 0.05905511811023622700 ) ;
+#816 = SURFACE_SIDE_STYLE ('',( #29 ) ) ;
+#817 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#818 = VERTEX_POINT ( 'NONE', #647 ) ;
+#819 = FACE_OUTER_BOUND ( 'NONE', #412, .T. ) ;
+#820 = ORIENTED_EDGE ( 'NONE', *, *, #391, .F. ) ;
+#821 = PRESENTATION_STYLE_ASSIGNMENT (( #452 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Rifles/AR-15_Hanuman_Bullpup_v1.0-WarFairy/STEP/Trigger_Rod_Right_3.step

@@ -0,0 +1,912 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Trigger_Rod_Right_3.step',
+    '2014-05-14T06:09:33',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2013',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636449800, -0.5900217609404117000, 0.0000000000000000000 ) ) ;
+#2 = ORIENTED_EDGE ( 'NONE', *, *, #556, .T. ) ;
+#3 = LINE ( 'NONE', #540, #727 ) ;
+#4 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.206969255606346500E-016 ) ) ;
+#5 = ORIENTED_EDGE ( 'NONE', *, *, #144, .F. ) ;
+#6 = EDGE_LOOP ( 'NONE', ( #825, #668, #675, #737 ) ) ;
+#7 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.206969255606346500E-016 ) ) ;
+#8 = CARTESIAN_POINT ( 'NONE',  ( 6.403715421571620900E-017, -0.4688193074009389100, 0.03937007874015748000 ) ) ;
+#9 = ORIENTED_EDGE ( 'NONE', *, *, #401, .T. ) ;
+#10 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#11 = EDGE_LOOP ( 'NONE', ( #278, #80, #757, #530, #16, #2, #364, #116, #693, #191, #613 ) ) ;
+#12 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.206969255606346500E-016 ) ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5900217609404117000, 0.03937007874015689000 ) ) ;
+#14 = VERTEX_POINT ( 'NONE', #522 ) ;
+#15 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#16 = ORIENTED_EDGE ( 'NONE', *, *, #551, .F. ) ;
+#17 = LINE ( 'NONE', #314, #386 ) ;
+#18 = CARTESIAN_POINT ( 'NONE',  ( -4.298767429372826900, -0.4719115247199393600, 0.03937007874015748000 ) ) ;
+#19 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#20 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ;
+#21 = LINE ( 'NONE', #310, #391 ) ;
+#22 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #322, #751, #548, #96, #623, #172 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 4 ),
+ ( 6.918763595780575100E-016, 0.0004147974969104172800, 0.0008295949938201426200 ),
+ .UNSPECIFIED. ) ;
+#23 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, 0.09842519685039372000 ) ) ;
+#24 = ORIENTED_EDGE ( 'NONE', *, *, #642, .F. ) ;
+#25 = EDGE_LOOP ( 'NONE', ( #528, #316, #807, #403 ) ) ;
+#26 = VERTEX_POINT ( 'NONE', #376 ) ;
+#27 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#28 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3341162491293874800, 0.09842519685039372000 ) ) ;
+#29 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#30 = CARTESIAN_POINT ( 'NONE',  ( -4.629520340987650000, -0.5894373153516244700, 0.01421977231079150200 ) ) ;
+#31 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#32 = ORIENTED_EDGE ( 'NONE', *, *, #514, .F. ) ;
+#33 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4613623439155640200, -0.03937007874015748000 ) ) ;
+#34 = LINE ( 'NONE', #70, #206 ) ;
+#35 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#36 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191100, -0.5506516822002542900, 0.0000000000000000000 ) ) ;
+#37 = ORIENTED_EDGE ( 'NONE', *, *, #562, .T. ) ;
+#38 = VECTOR ( 'NONE', #740, 39.37007874015748100 ) ;
+#39 = VERTEX_POINT ( 'NONE', #224 ) ;
+#40 = VERTEX_POINT ( 'NONE', #674 ) ;
+#41 = CYLINDRICAL_SURFACE ( 'NONE', #114, 0.05905511811023622700 ) ;
+#42 = VERTEX_POINT ( 'NONE', #735 ) ;
+#43 = ADVANCED_FACE ( 'NONE', ( #734 ), #346, .T. ) ;
+#44 = LINE ( 'NONE', #1, #862 ) ;
+#45 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#46 = ADVANCED_FACE ( 'NONE', ( #873 ), #449, .T. ) ;
+#47 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, 0.1018026156546038000 ) ) ;
+#48 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ;
+#49 = FACE_OUTER_BOUND ( 'NONE', #637, .T. ) ;
+#50 = LINE ( 'NONE', #375, #229 ) ;
+#51 = ADVANCED_FACE ( 'NONE', ( #377 ), #710, .T. ) ;
+#52 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3734863278695450000, 0.01968503937007874000 ) ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #459, .T. ) ;
+#55 = CIRCLE ( 'NONE', #245, 0.05905511811023620600 ) ;
+#56 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#57 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#58 = ORIENTED_EDGE ( 'NONE', *, *, #142, .F. ) ;
+#59 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #365 ) ) ;
+#60 = CARTESIAN_POINT ( 'NONE',  ( -4.366958406048768300, -0.4824607055243142500, 0.03937007874015748000 ) ) ;
+#61 = VERTEX_POINT ( 'NONE', #788 ) ;
+#62 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#63 = ORIENTED_EDGE ( 'NONE', *, *, #218, .T. ) ;
+#64 = CYLINDRICAL_SURFACE ( 'NONE', #165, 0.2362204724409451000 ) ;
+#65 = ORIENTED_EDGE ( 'NONE', *, *, #549, .T. ) ;
+#66 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #365, .NOT_KNOWN. ) ;
+#67 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #66, #600 ) ;
+#68 = VERTEX_POINT ( 'NONE', #739 ) ;
+#69 = SURFACE_STYLE_FILL_AREA ( #660 ) ;
+#70 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3931713672396237000, 0.1018026156546025800 ) ) ;
+#71 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#72 = AXIS2_PLACEMENT_3D ( 'NONE', #330, #35, #560 ) ;
+#73 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#74 = ORIENTED_EDGE ( 'NONE', *, *, #501, .F. ) ;
+#75 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 1.365923996832131400E-016, 0.0000000000000000000 ) ) ;
+#76 = CIRCLE ( 'NONE', #371, 0.2362204724409451000 ) ;
+#77 = LINE ( 'NONE', #145, #771 ) ;
+#78 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#79 = EDGE_CURVE ( 'NONE', #258, #756, #857, .T. ) ;
+#80 = ORIENTED_EDGE ( 'NONE', *, *, #493, .F. ) ;
+#81 = ORIENTED_EDGE ( 'NONE', *, *, #452, .F. ) ;
+#82 = CIRCLE ( 'NONE', #267, 0.01054918080437465200 ) ;
+#83 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#84 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#85 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#86 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#87 = ORIENTED_EDGE ( 'NONE', *, *, #521, .F. ) ;
+#88 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #287 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #811, #409, #865 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#89 = FACE_OUTER_BOUND ( 'NONE', #305, .T. ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.6097068003104905200, 0.1018026156546038000 ) ) ;
+#91 = VERTEX_POINT ( 'NONE', #13 ) ;
+#92 = ORIENTED_EDGE ( 'NONE', *, *, #622, .F. ) ;
+#93 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#94 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #98 ), #88 ) ;
+#95 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #98 ) ) ;
+#96 = CARTESIAN_POINT ( 'NONE',  ( -4.624458486195449000, -0.3636145523997065800, 0.001909497529353760300 ) ) ;
+#97 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#98 = STYLED_ITEM ( 'NONE', ( #661 ), #463 ) ;
+#99 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#100 = VECTOR ( 'NONE', #19, 39.37007874015748100 ) ;
+#101 = VECTOR ( 'NONE', #881, 39.37007874015748100 ) ;
+#102 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636449800, -0.5900217609404117000, 0.01968503937010635700 ) ) ;
+#103 = ORIENTED_EDGE ( 'NONE', *, *, #595, .F. ) ;
+#104 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #180 ) ;
+#105 = ORIENTED_EDGE ( 'NONE', *, *, #599, .F. ) ;
+#106 = CIRCLE ( 'NONE', #283, 0.07874015748031502900 ) ;
+#107 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#108 = AXIS2_PLACEMENT_3D ( 'NONE', #325, #699, #251 ) ;
+#109 = PRODUCT_CONTEXT ( 'NONE', #180, 'mechanical' ) ;
+#110 = ORIENTED_EDGE ( 'NONE', *, *, #297, .T. ) ;
+#111 = AXIS2_PLACEMENT_3D ( 'NONE', #404, #29, #806 ) ;
+#112 = ORIENTED_EDGE ( 'NONE', *, *, #567, .F. ) ;
+#113 = TOROIDAL_SURFACE ( 'NONE', #139, 0.003377418804208867100, 0.05905511811023622700 ) ;
+#114 = AXIS2_PLACEMENT_3D ( 'NONE', #400, #174, #755 ) ;
+#115 = ORIENTED_EDGE ( 'NONE', *, *, #647, .F. ) ;
+#116 = ORIENTED_EDGE ( 'NONE', *, *, #562, .F. ) ;
+#117 = ADVANCED_FACE ( 'NONE', ( #173 ), #122, .F. ) ;
+#118 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #640 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #863, #481, #31 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#119 = AXIS2_PLACEMENT_3D ( 'NONE', #27, #550, #97 ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3538012884994662400, 0.09842519685039372000 ) ) ;
+#121 = EDGE_LOOP ( 'NONE', ( #24, #418, #852, #547 ) ) ;
+#122 = CYLINDRICAL_SURFACE ( 'NONE', #417, 0.05905511811023622700 ) ;
+#123 = LINE ( 'NONE', #132, #101 ) ;
+#124 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#125 = ORIENTED_EDGE ( 'NONE', *, *, #646, .F. ) ;
+#126 = FACE_OUTER_BOUND ( 'NONE', #445, .T. ) ;
+#127 = ADVANCED_FACE ( 'NONE', ( #552 ), #697, .F. ) ;
+#128 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#129 = AXIS2_PLACEMENT_3D ( 'NONE', #33, #810, #333 ) ;
+#130 = AXIS2_PLACEMENT_3D ( 'NONE', #487, #866, #799 ) ;
+#131 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#133 = LINE ( 'NONE', #324, #704 ) ;
+#134 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#135 = VERTEX_POINT ( 'NONE', #382 ) ;
+#136 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#137 = VERTEX_POINT ( 'NONE', #844 ) ;
+#138 = CIRCLE ( 'NONE', #221, 0.07874015748031496000 ) ;
+#139 = AXIS2_PLACEMENT_3D ( 'NONE', #28, #99, #175 ) ;
+#140 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( -4.952543584884741000, -0.4719115247199389700, -1.263779527559055300 ) ) ;
+#142 = EDGE_CURVE ( 'NONE', #402, #270, #496, .T. ) ;
+#143 = EDGE_LOOP ( 'NONE', ( #215, #510 ) ) ;
+#144 = EDGE_CURVE ( 'NONE', #608, #264, #524, .T. ) ;
+#145 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3538012884994662400, 0.1574803149606299200 ) ) ;
+#146 = TOROIDAL_SURFACE ( 'NONE', #406, 0.01054918080437490700, 0.07874015748031496000 ) ;
+#147 = AXIS2_PLACEMENT_3D ( 'NONE', #750, #695, #754 ) ;
+#148 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#149 = AXIS2_PLACEMENT_3D ( 'NONE', #23, #694, #242 ) ;
+#150 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5703367215703329900, 0.01968503937007872300 ) ) ;
+#151 = EDGE_LOOP ( 'NONE', ( #870, #778, #276, #413, #220, #359, #701, #692 ) ) ;
+#152 = LINE ( 'NONE', #369, #529 ) ;
+#153 = EDGE_LOOP ( 'NONE', ( #618, #340, #462, #801, #762, #399, #227, #105 ) ) ;
+#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#155 = DIRECTION ( 'NONE',  ( 2.253954366339571700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#156 = AXIS2_PLACEMENT_3D ( 'NONE', #407, #864, #482 ) ;
+#157 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, 0.0000000000000000000 ) ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #499, .F. ) ;
+#159 = TOROIDAL_SURFACE ( 'NONE', #147, 0.01054918080437490700, 0.07874015748031496000 ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #249, .F. ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3341162491293874800, 0.1018026156546038000 ) ) ;
+#162 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191100, -0.4824607055243142500, -0.03937007874015748000 ) ) ;
+#163 = ORIENTED_EDGE ( 'NONE', *, *, #630, .T. ) ;
+#164 = LINE ( 'NONE', #317, #341 ) ;
+#165 = AXIS2_PLACEMENT_3D ( 'NONE', #633, #256, #107 ) ;
+#166 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, 0.1018026156546032000 ) ) ;
+#167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#168 = VERTEX_POINT ( 'NONE', #311 ) ;
+#169 = AXIS2_PLACEMENT_3D ( 'NONE', #546, #93, #620 ) ;
+#170 = PLANE ( 'NONE',  #149 ) ;
+#171 = EDGE_CURVE ( 'NONE', #713, #42, #302, .T. ) ;
+#172 = CARTESIAN_POINT ( 'NONE',  ( -4.619694921210810700, -0.3734863278695449400, -8.994184308337048800E-019 ) ) ;
+#173 = FACE_OUTER_BOUND ( 'NONE', #420, .T. ) ;
+#174 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -2.586362690585028100E-018 ) ) ;
+#175 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#176 = AXIS2_PLACEMENT_3D ( 'NONE', #90, #615, #167 ) ;
+#177 = ORIENTED_EDGE ( 'NONE', *, *, #622, .T. ) ;
+#178 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#179 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4688193074009391300, 0.03937007874015748000 ) ) ;
+#180 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#181 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636449800, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#182 = ORIENTED_EDGE ( 'NONE', *, *, #494, .F. ) ;
+#183 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #689, #235 ) ;
+#184 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #634 ) ;
+#185 = VECTOR ( 'NONE', #855, 39.37007874015748100 ) ;
+#186 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #775, 'distance_accuracy_value', 'NONE');
+#187 = ORIENTED_EDGE ( 'NONE', *, *, #580, .T. ) ;
+#188 = LINE ( 'NONE', #687, #748 ) ;
+#189 = AXIS2_PLACEMENT_3D ( 'NONE', #672, #222, #732 ) ;
+#190 = AXIS2_PLACEMENT_3D ( 'NONE', #217, #730, #294 ) ;
+#191 = ORIENTED_EDGE ( 'NONE', *, *, #568, .F. ) ;
+#192 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #830, #439 ) ;
+#193 = AXIS2_PLACEMENT_3D ( 'NONE', #291, #779, #372 ) ;
+#194 = ORIENTED_EDGE ( 'NONE', *, *, #380, .T. ) ;
+#195 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#196 = ORIENTED_EDGE ( 'NONE', *, *, #218, .F. ) ;
+#197 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #285 );
+#198 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#199 = AXIS2_PLACEMENT_3D ( 'NONE', #663, #210, #723 ) ;
+#200 = ADVANCED_FACE ( 'NONE', ( #821 ), #146, .F. ) ;
+#201 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, 0.1968503937007874100 ) ) ;
+#202 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#203 = ORIENTED_EDGE ( 'NONE', *, *, #616, .T. ) ;
+#204 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, 0.1968503937007874100 ) ) ;
+#205 = EDGE_CURVE ( 'NONE', #436, #329, #837, .T. ) ;
+#206 = VECTOR ( 'NONE', #461, 39.37007874015748100 ) ;
+#207 = SURFACE_SIDE_STYLE ('',( #69 ) ) ;
+#208 = ORIENTED_EDGE ( 'NONE', *, *, #574, .F. ) ;
+#209 = VECTOR ( 'NONE', #15, 39.37007874015748100 ) ;
+#210 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#211 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#212 = AXIS2_PLACEMENT_3D ( 'NONE', #360, #828, #437 ) ;
+#213 = AXIS2_PLACEMENT_3D ( 'NONE', #53, #577, #131 ) ;
+#214 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.5506516822002542900, 0.0000000000000000000 ) ) ;
+#215 = ORIENTED_EDGE ( 'NONE', *, *, #452, .T. ) ;
+#216 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4824607055243142500, -0.03937007874015748000 ) ) ;
+#217 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199393600, 0.03937007874015748000 ) ) ;
+#218 = EDGE_CURVE ( 'NONE', #782, #643, #326, .T. ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -1.263779527559055300 ) ) ;
+#220 = ORIENTED_EDGE ( 'NONE', *, *, #625, .T. ) ;
+#221 = AXIS2_PLACEMENT_3D ( 'NONE', #718, #277, #770 ) ;
+#222 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#223 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199386400, 0.0000000000000000000 ) ) ;
+#224 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4688193074009391300, 0.1968503937007874100 ) ) ;
+#225 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -1.365923996832131400E-016, 0.0000000000000000000 ) ) ;
+#226 = AXIS2_PLACEMENT_3D ( 'NONE', #162, #690, #237 ) ;
+#227 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ;
+#228 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3341162491293874800, 0.1018026156546025800 ) ) ;
+#229 = VECTOR ( 'NONE', #7, 39.37007874015748100 ) ;
+#230 = AXIS2_PLACEMENT_3D ( 'NONE', #234, #746, #312 ) ;
+#231 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#232 = VERTEX_POINT ( 'NONE', #688 ) ;
+#233 = LINE ( 'NONE', #306, #609 ) ;
+#234 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.6097068003104905200, 0.09504777804618487500 ) ) ;
+#235 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#236 = ORIENTED_EDGE ( 'NONE', *, *, #205, .T. ) ;
+#237 = DIRECTION ( 'NONE',  ( 3.469446951953614200E-015, -1.000000000000000000, 8.673617379884035500E-016 ) ) ;
+#238 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#239 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -2.586362690585028100E-018 ) ) ;
+#240 = FACE_OUTER_BOUND ( 'NONE', #569, .T. ) ;
+#241 = EDGE_LOOP ( 'NONE', ( #564, #5, #848, #706 ) ) ;
+#242 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#243 = AXIS2_PLACEMENT_3D ( 'NONE', #532, #604, #155 ) ;
+#244 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.01968503937007872300 ) ) ;
+#245 = AXIS2_PLACEMENT_3D ( 'NONE', #385, #845, #458 ) ;
+#246 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#247 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#248 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3931713672396237000, 0.09504777804618572100 ) ) ;
+#249 = EDGE_CURVE ( 'NONE', #876, #596, #479, .T. ) ;
+#250 = CARTESIAN_POINT ( 'NONE',  ( -4.619694921210810700, -0.5703367215703331100, -8.537024980200964300E-018 ) ) ;
+#251 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -1.365923996832131400E-016, 0.0000000000000000000 ) ) ;
+#252 = ORIENTED_EDGE ( 'NONE', *, *, #467, .T. ) ;
+#253 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3931713672396237600, 0.0000000000000000000 ) ) ;
+#254 = LINE ( 'NONE', #517, #791 ) ;
+#255 = SURFACE_SIDE_STYLE ('',( #816 ) ) ;
+#256 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#257 = EDGE_CURVE ( 'NONE', #713, #410, #678, .T. ) ;
+#258 = VERTEX_POINT ( 'NONE', #166 ) ;
+#259 = VECTOR ( 'NONE', #225, 39.37007874015748100 ) ;
+#260 = EDGE_LOOP ( 'NONE', ( #92, #416, #783, #163 ) ) ;
+#261 = EDGE_CURVE ( 'NONE', #433, #793, #453, .T. ) ;
+#262 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ;
+#263 = FACE_OUTER_BOUND ( 'NONE', #151, .T. ) ;
+#264 = VERTEX_POINT ( 'NONE', #743 ) ;
+#265 = ORIENTED_EDGE ( 'NONE', *, *, #647, .T. ) ;
+#266 = AXIS2_PLACEMENT_3D ( 'NONE', #301, #787, #379 ) ;
+#267 = AXIS2_PLACEMENT_3D ( 'NONE', #597, #148, #676 ) ;
+#268 = ADVANCED_FACE ( 'NONE', ( #273 ), #854, .T. ) ;
+#269 = PLANE ( 'NONE',  #349 ) ;
+#270 = VERTEX_POINT ( 'NONE', #874 ) ;
+#271 = AXIS2_PLACEMENT_3D ( 'NONE', #836, #448, #10 ) ;
+#272 = ADVANCED_FACE ( 'NONE', ( #790 ), #631, .T. ) ;
+#273 = FACE_OUTER_BOUND ( 'NONE', #789, .T. ) ;
+#274 = LINE ( 'NONE', #60, #809 ) ;
+#275 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#276 = ORIENTED_EDGE ( 'NONE', *, *, #638, .T. ) ;
+#277 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#278 = ORIENTED_EDGE ( 'NONE', *, *, #536, .T. ) ;
+#279 = ORIENTED_EDGE ( 'NONE', *, *, #450, .F. ) ;
+#280 = CIRCLE ( 'NONE', #266, 0.07874015748031496000 ) ;
+#281 = ADVANCED_FACE ( 'NONE', ( #49 ), #269, .T. ) ;
+#282 = EDGE_CURVE ( 'NONE', #713, #831, #76, .T. ) ;
+#283 = AXIS2_PLACEMENT_3D ( 'NONE', #223, #733, #298 ) ;
+#284 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3931713672396237000, 0.09842519685039372000 ) ) ;
+#285 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#286 = ORIENTED_EDGE ( 'NONE', *, *, #638, .F. ) ;
+#287 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #811, 'distance_accuracy_value', 'NONE');
+#288 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#289 = AXIS2_PLACEMENT_3D ( 'NONE', #216, #729, #666 ) ;
+#290 = FACE_OUTER_BOUND ( 'NONE', #561, .T. ) ;
+#291 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4613623439155637400, -0.03937007874015748000 ) ) ;
+#292 = ORIENTED_EDGE ( 'NONE', *, *, #521, .T. ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #534, .F. ) ;
+#294 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#295 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#296 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #731, #295 ) ;
+#297 = EDGE_CURVE ( 'NONE', #635, #135, #653, .T. ) ;
+#298 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#299 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.03937007874015748000 ) ) ;
+#300 = AXIS2_PLACEMENT_3D ( 'NONE', #62, #587, #140 ) ;
+#301 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4824607055243142500, -0.03937007874015748000 ) ) ;
+#302 = LINE ( 'NONE', #533, #100 ) ;
+#303 = VECTOR ( 'NONE', #136, 39.37007874015748100 ) ;
+#304 = AXIS2_PLACEMENT_3D ( 'NONE', #520, #71, #592 ) ;
+#305 = EDGE_LOOP ( 'NONE', ( #803, #65, #724, #187 ) ) ;
+#306 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204192900, -4.388890002657899800E-015, 0.1968503937007874100 ) ) ;
+#307 = VERTEX_POINT ( 'NONE', #768 ) ;
+#308 = CYLINDRICAL_SURFACE ( 'NONE', #289, 0.07874015748031496000 ) ;
+#309 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#310 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5506516822002542900, 0.09842519685039372000 ) ) ;
+#311 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.4688193074009391900, 0.1968503937007874100 ) ) ;
+#312 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.734723475976807500E-015 ) ) ;
+#313 = VECTOR ( 'NONE', #553, 39.37007874015748100 ) ;
+#314 = CARTESIAN_POINT ( 'NONE',  ( -4.887614533388943000E-018, -0.5900217609404117000, 0.1574803149606306100 ) ) ;
+#315 = AXIS2_PLACEMENT_3D ( 'NONE', #664, #211, #725 ) ;
+#316 = ORIENTED_EDGE ( 'NONE', *, *, #568, .T. ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, 0.0000000000000000000, 0.1968503937007874100 ) ) ;
+#318 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #186 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #775, #363, #829 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#319 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#320 = VERTEX_POINT ( 'NONE', #355 ) ;
+#321 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #344 ), #318 ) ;
+#322 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636449800, -0.3538012884994662400, 0.01968503937005110600 ) ) ;
+#323 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #344 ) ) ;
+#324 = CARTESIAN_POINT ( 'NONE',  ( -4.730269911220782200, -0.3538012884994662400, 0.01968503937007874000 ) ) ;
+#325 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4688193074009391300, -1.264173228346457100 ) ) ;
+#326 = CIRCLE ( 'NONE', #398, 0.01968503937007875700 ) ;
+#327 = CIRCLE ( 'NONE', #212, 0.05905511811023622700 ) ;
+#328 = AXIS2_PLACEMENT_3D ( 'NONE', #772, #507, #56 ) ;
+#329 = VERTEX_POINT ( 'NONE', #428 ) ;
+#330 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#331 = VERTEX_POINT ( 'NONE', #47 ) ;
+#332 = FACE_OUTER_BOUND ( 'NONE', #726, .T. ) ;
+#333 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#334 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
+#335 = AXIS2_PLACEMENT_3D ( 'NONE', #204, #506, #52 ) ;
+#336 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, 0.09504777804618486100 ) ) ;
+#337 = VECTOR ( 'NONE', #700, 39.37007874015748100 ) ;
+#338 = VERTEX_POINT ( 'NONE', #879 ) ;
+#339 = AXIS2_PLACEMENT_3D ( 'NONE', #575, #128, #657 ) ;
+#340 = ORIENTED_EDGE ( 'NONE', *, *, #652, .T. ) ;
+#341 = VECTOR ( 'NONE', #394, 39.37007874015748100 ) ;
+#342 = EDGE_LOOP ( 'NONE', ( #426, #158, #74, #48, #32, #502, #63, #87, #812, #682, #483 ) ) ;
+#343 = ADVANCED_FACE ( 'NONE', ( #446 ), #824, .T. ) ;
+#344 = STYLED_ITEM ( 'NONE', ( #422 ), #361 ) ;
+#345 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#346 = CYLINDRICAL_SURFACE ( 'NONE', #442, 0.01968503937007874000 ) ;
+#347 = ADVANCED_FACE ( 'NONE', ( #804 ), #785, .T. ) ;
+#348 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.1968503937007874100 ) ) ;
+#349 = AXIS2_PLACEMENT_3D ( 'NONE', #348, #198, #878 ) ;
+#350 = ORIENTED_EDGE ( 'NONE', *, *, #551, .T. ) ;
+#351 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #67 ) ;
+#352 = VERTEX_POINT ( 'NONE', #827 ) ;
+#353 = CIRCLE ( 'NONE', #315, 0.003377418804208867100 ) ;
+#354 = AXIS2_PLACEMENT_3D ( 'NONE', #571, #649, #712 ) ;
+#355 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, 0.09504777804618606800 ) ) ;
+#356 = ADVANCED_FACE ( 'NONE', ( #645 ), #883, .F. ) ;
+#357 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#358 = FILL_AREA_STYLE_COLOUR ( '', #246 ) ;
+#359 = ORIENTED_EDGE ( 'NONE', *, *, #499, .T. ) ;
+#360 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3341162491293874800, 0.09504777804618572100 ) ) ;
+#361 = MANIFOLD_SOLID_BREP ( 'Stock-Trigger bar_1_2-1', #515 ) ;
+#362 = CIRCLE ( 'NONE', #169, 0.05905511811023624000 ) ;
+#363 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#364 = ORIENTED_EDGE ( 'NONE', *, *, #558, .T. ) ;
+#365 = PRODUCT ( 'Trigger_Rod_Right_3', 'Trigger_Rod_Right_3', '', ( #109 ) ) ;
+#366 = PLANE ( 'NONE',  #192 ) ;
+#367 = VERTEX_POINT ( 'NONE', #579 ) ;
+#368 = VECTOR ( 'NONE', #389, 39.37007874015748100 ) ;
+#369 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#370 = AXIS2_PLACEMENT_3D ( 'NONE', #424, #495, #45 ) ;
+#371 = AXIS2_PLACEMENT_3D ( 'NONE', #201, #716, #275 ) ;
+#372 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 8.673617379884035500E-016 ) ) ;
+#373 = CARTESIAN_POINT ( 'NONE',  ( -4.619694921210810700, -0.3734863278695449400, -8.994184308337048800E-019 ) ) ;
+#374 = ORIENTED_EDGE ( 'NONE', *, *, #491, .F. ) ;
+#375 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3538012884994662400, 0.03937007874015751400 ) ) ;
+#376 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204190900, -0.4824607055243142500, 0.03937007874015748000 ) ) ;
+#377 = FACE_OUTER_BOUND ( 'NONE', #492, .T. ) ;
+#378 = ORIENTED_EDGE ( 'NONE', *, *, #205, .F. ) ;
+#379 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#380 = EDGE_CURVE ( 'NONE', #320, #331, #353, .T. ) ;
+#381 = DIRECTION ( 'NONE',  ( 2.253954366339571700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#382 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4613623439155638000, 0.03937007874015748000 ) ) ;
+#383 = ORIENTED_EDGE ( 'NONE', *, *, #556, .F. ) ;
+#384 = AXIS2_PLACEMENT_3D ( 'NONE', #120, #345, #820 ) ;
+#385 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.6097068003104905200, 0.1018026156546035000 ) ) ;
+#386 = VECTOR ( 'NONE', #393, 39.37007874015748100 ) ;
+#387 = EDGE_CURVE ( 'NONE', #831, #658, #44, .T. ) ;
+#388 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#389 = DIRECTION ( 'NONE',  ( 2.253954366339571700E-015, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#390 = ORIENTED_EDGE ( 'NONE', *, *, #282, .T. ) ;
+#391 = VECTOR ( 'NONE', #742, 39.37007874015748100 ) ;
+#392 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#393 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#394 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#395 = AXIS2_PLACEMENT_3D ( 'NONE', #749, #319, #800 ) ;
+#396 = ORIENTED_EDGE ( 'NONE', *, *, #581, .T. ) ;
+#397 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.3734863278695450000, 0.0000000000000000000 ) ) ;
+#398 = AXIS2_PLACEMENT_3D ( 'NONE', #541, #86, #614 ) ;
+#399 = ORIENTED_EDGE ( 'NONE', *, *, #607, .F. ) ;
+#400 = CARTESIAN_POINT ( 'NONE',  ( 2.632984869330313400E-019, -0.6097068003104905200, 0.09504777804618487500 ) ) ;
+#401 = EDGE_CURVE ( 'NONE', #831, #738, #152, .T. ) ;
+#402 = VERTEX_POINT ( 'NONE', #584 ) ;
+#403 = ORIENTED_EDGE ( 'NONE', *, *, #617, .F. ) ;
+#404 = CARTESIAN_POINT ( 'NONE',  ( -1.179974529415955400E-017, -0.6097068003104905200, 0.1018026156546032600 ) ) ;
+#405 = CARTESIAN_POINT ( 'NONE',  ( -4.624437500645612400, -0.5801693309758677600, 0.001874477096204328600 ) ) ;
+#406 = AXIS2_PLACEMENT_3D ( 'NONE', #792, #460, #610 ) ;
+#407 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5900217609404117000, 0.09842519685039372000 ) ) ;
+#408 = ORIENTED_EDGE ( 'NONE', *, *, #601, .F. ) ;
+#409 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#410 = VERTEX_POINT ( 'NONE', #441 ) ;
+#411 = CIRCLE ( 'NONE', #176, 0.05905511811023622700 ) ;
+#412 = AXIS2_PLACEMENT_3D ( 'NONE', #797, #392, #850 ) ;
+#413 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ;
+#414 = CIRCLE ( 'NONE', #230, 0.05905511811023620600 ) ;
+#415 = AXIS2_PLACEMENT_3D ( 'NONE', #228, #309, #681 ) ;
+#416 = ORIENTED_EDGE ( 'NONE', *, *, #501, .T. ) ;
+#417 = AXIS2_PLACEMENT_3D ( 'NONE', #840, #12, #154 ) ;
+#418 = ORIENTED_EDGE ( 'NONE', *, *, #79, .F. ) ;
+#419 = ADVANCED_FACE ( 'NONE', ( #126, #624 ), #513, .F. ) ;
+#420 = EDGE_LOOP ( 'NONE', ( #103, #37, #709, #408 ) ) ;
+#421 = AXIS2_PLACEMENT_3D ( 'NONE', #795, #388, #846 ) ;
+#422 = PRESENTATION_STYLE_ASSIGNMENT (( #721 ) ) ;
+#423 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#424 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3931713672396237000, 0.09842519685039372000 ) ) ;
+#425 = AXIS2_PLACEMENT_3D ( 'NONE', #150, #677, #598 ) ;
+#426 = ORIENTED_EDGE ( 'NONE', *, *, #494, .T. ) ;
+#427 = ADVANCED_FACE ( 'NONE', ( #332 ), #308, .F. ) ;
+#428 = CARTESIAN_POINT ( 'NONE',  ( -4.619694921210810700, -0.5703367215703331100, -8.537024980200964300E-018 ) ) ;
+#429 = VECTOR ( 'NONE', #503, 39.37007874015748100 ) ;
+#430 = CIRCLE ( 'NONE', #183, 0.05905511811023622700 ) ;
+#431 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#432 = AXIS2_PLACEMENT_3D ( 'NONE', #531, #78, #602 ) ;
+#433 = VERTEX_POINT ( 'NONE', #781 ) ;
+#434 = VECTOR ( 'NONE', #75, 39.37007874015748100 ) ;
+#435 = AXIS2_PLACEMENT_3D ( 'NONE', #299, #526, #73 ) ;
+#436 = VERTEX_POINT ( 'NONE', #373 ) ;
+#437 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.156482317317871300E-015, 1.000000000000000000 ) ) ;
+#438 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #334 );
+#439 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#440 = ORIENTED_EDGE ( 'NONE', *, *, #662, .F. ) ;
+#441 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636449800, -0.3538012884994662400, 0.01968503937005110600 ) ) ;
+#442 = AXIS2_PLACEMENT_3D ( 'NONE', #594, #784, #786 ) ;
+#443 = FACE_OUTER_BOUND ( 'NONE', #260, .T. ) ;
+#444 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#445 = EDGE_LOOP ( 'NONE', ( #764, #350, #208, #591, #252, #504, #292, #769, #378 ) ) ;
+#446 = FACE_OUTER_BOUND ( 'NONE', #143, .T. ) ;
+#447 = AXIS2_PLACEMENT_3D ( 'NONE', #157, #686, #231 ) ;
+#448 = DIRECTION ( 'NONE',  ( 1.224646799147353200E-016, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#449 = PLANE ( 'NONE',  #435 ) ;
+#450 = EDGE_CURVE ( 'NONE', #270, #596, #842, .T. ) ;
+#451 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#452 = EDGE_CURVE ( 'NONE', #596, #876, #505, .T. ) ;
+#453 = CIRCLE ( 'NONE', #384, 0.05905511811023620600 ) ;
+#454 = VECTOR ( 'NONE', #728, 39.37007874015748100 ) ;
+#455 = PLANE ( 'NONE',  #243 ) ;
+#456 = ORIENTED_EDGE ( 'NONE', *, *, #465, .T. ) ;
+#457 = LINE ( 'NONE', #523, #794 ) ;
+#458 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.734723475976807500E-015 ) ) ;
+#459 = EDGE_CURVE ( 'NONE', #402, #876, #702, .T. ) ;
+#460 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#461 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#462 = ORIENTED_EDGE ( 'NONE', *, *, #257, .F. ) ;
+#463 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trigger_Rod_Right_3', ( #361, #72 ), #118 ) ;
+#464 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636449800, -0.3538012884994662400, 0.0000000000000000000 ) ) ;
+#465 = EDGE_CURVE ( 'NONE', #270, #402, #826, .T. ) ;
+#466 = CYLINDRICAL_SURFACE ( 'NONE', #129, 0.07874015748031496000 ) ;
+#467 = EDGE_CURVE ( 'NONE', #264, #61, #106, .T. ) ;
+#468 = ORIENTED_EDGE ( 'NONE', *, *, #459, .F. ) ;
+#469 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5703367215703329900, 0.0000000000000000000 ) ) ;
+#470 = ORIENTED_EDGE ( 'NONE', *, *, #655, .F. ) ;
+#471 = EDGE_CURVE ( 'NONE', #264, #512, #485, .T. ) ;
+#472 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636449800, -0.5900217609404117000, 0.01968503937010635700 ) ) ;
+#473 = EDGE_CURVE ( 'NONE', #14, #512, #82, .T. ) ;
+#474 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636449800, -0.5900217609404118100, 0.1968503937007874100 ) ) ;
+#475 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5900217609404117000, 0.01968503937007872300 ) ) ;
+#476 = ORIENTED_EDGE ( 'NONE', *, *, #493, .T. ) ;
+#477 = CARTESIAN_POINT ( 'NONE',  ( -4.628296631038922200, -0.5872774894813357300, 0.009306590092234562000 ) ) ;
+#478 = EDGE_CURVE ( 'NONE', #61, #14, #280, .T. ) ;
+#479 = CIRCLE ( 'NONE', #395, 0.1181102362204720100 ) ;
+#480 = LINE ( 'NONE', #586, #303 ) ;
+#481 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#482 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#483 = ORIENTED_EDGE ( 'NONE', *, *, #488, .T. ) ;
+#484 = ORIENTED_EDGE ( 'NONE', *, *, #486, .F. ) ;
+#485 = CIRCLE ( 'NONE', #271, 0.07874015748031502900 ) ;
+#486 = EDGE_CURVE ( 'NONE', #39, #168, #814, .T. ) ;
+#487 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.6097068003104905200, 0.09842519685039372000 ) ) ;
+#488 = EDGE_CURVE ( 'NONE', #307, #168, #457, .T. ) ;
+#489 = LINE ( 'NONE', #628, #337 ) ;
+#490 = ORIENTED_EDGE ( 'NONE', *, *, #478, .T. ) ;
+#491 = EDGE_CURVE ( 'NONE', #307, #683, #659, .T. ) ;
+#492 = EDGE_LOOP ( 'NONE', ( #196, #470, #440, #554 ) ) ;
+#493 = EDGE_CURVE ( 'NONE', #683, #39, #636, .T. ) ;
+#494 = EDGE_CURVE ( 'NONE', #168, #738, #233, .T. ) ;
+#495 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#496 = CIRCLE ( 'NONE', #447, 0.1181102362204720100 ) ;
+#497 = FACE_OUTER_BOUND ( 'NONE', #153, .T. ) ;
+#498 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.4613623439155640200, 0.03937007874015748000 ) ) ;
+#499 = EDGE_CURVE ( 'NONE', #68, #738, #774, .T. ) ;
+#500 = ADVANCED_FACE ( 'NONE', ( #763 ), #455, .F. ) ;
+#501 = EDGE_CURVE ( 'NONE', #40, #68, #55, .T. ) ;
+#502 = ORIENTED_EDGE ( 'NONE', *, *, #516, .F. ) ;
+#503 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#504 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ;
+#505 = CIRCLE ( 'NONE', #296, 0.1181102362204720100 ) ;
+#506 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#507 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#508 = EDGE_CURVE ( 'NONE', #796, #40, #21, .T. ) ;
+#509 = CIRCLE ( 'NONE', #156, 0.05905511811023682300 ) ;
+#510 = ORIENTED_EDGE ( 'NONE', *, *, #249, .T. ) ;
+#511 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#512 = VERTEX_POINT ( 'NONE', #18 ) ;
+#513 = PLANE ( 'NONE',  #300 ) ;
+#514 = EDGE_CURVE ( 'NONE', #833, #796, #414, .T. ) ;
+#515 = CLOSED_SHELL ( 'NONE', ( #347, #200, #880, #500, #356, #708, #427, #46, #117, #127, #877, #872, #43, #51, #823, #717, #419, #573, #644, #767, #268, #656, #650, #281, #272, #343 ) ) ;
+#516 = EDGE_CURVE ( 'NONE', #782, #833, #188, .T. ) ;
+#517 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, 0.09504777804618606800 ) ) ;
+#518 = ORIENTED_EDGE ( 'NONE', *, *, #471, .T. ) ;
+#519 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#520 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, 0.0000000000000000000 ) ) ;
+#521 = EDGE_CURVE ( 'NONE', #766, #643, #583, .T. ) ;
+#522 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4824607055243142500, 0.03937007874015748000 ) ) ;
+#523 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.4688193074009391900, -1.264173228346457100 ) ) ;
+#524 = CIRCLE ( 'NONE', #421, 0.07874015748031502900 ) ;
+#525 = CIRCLE ( 'NONE', #199, 0.05905511811023620600 ) ;
+#526 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#527 = EDGE_CURVE ( 'NONE', #26, #766, #566, .T. ) ;
+#528 = ORIENTED_EDGE ( 'NONE', *, *, #607, .T. ) ;
+#529 = VECTOR ( 'NONE', #288, 39.37007874015748100 ) ;
+#530 = ORIENTED_EDGE ( 'NONE', *, *, #549, .F. ) ;
+#531 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, 0.09842519685039372000 ) ) ;
+#532 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.4688193074009391900, -1.264173228346457100 ) ) ;
+#533 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#534 = EDGE_CURVE ( 'NONE', #26, #307, #3, .T. ) ;
+#535 = VECTOR ( 'NONE', #124, 39.37007874015748100 ) ;
+#536 = EDGE_CURVE ( 'NONE', #42, #39, #164, .T. ) ;
+#537 = LINE ( 'NONE', #397, #185 ) ;
+#538 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, 0.1018026156546038000 ) ) ;
+#539 = EDGE_LOOP ( 'NONE', ( #760, #572, #265, #236, #780, #542 ) ) ;
+#540 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204192900, -4.388890002657899800E-015, 0.03937007874015748000 ) ) ;
+#541 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5703367215703329900, 0.01968503937007872300 ) ) ;
+#542 = ORIENTED_EDGE ( 'NONE', *, *, #387, .F. ) ;
+#543 = LINE ( 'NONE', #202, #429 ) ;
+#544 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5506516822002542900, 0.09504777804618486100 ) ) ;
+#545 = EDGE_CURVE ( 'NONE', #683, #135, #871, .T. ) ;
+#546 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.6097068003104905200, 0.09504777804618423600 ) ) ;
+#547 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ;
+#548 = CARTESIAN_POINT ( 'NONE',  ( -4.628432330112926400, -0.3562341395561213800, 0.008924749547939425700 ) ) ;
+#549 = EDGE_CURVE ( 'NONE', #670, #135, #138, .T. ) ;
+#550 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#551 = EDGE_CURVE ( 'NONE', #338, #670, #543, .T. ) ;
+#552 = FACE_OUTER_BOUND ( 'NONE', #25, .T. ) ;
+#553 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#554 = ORIENTED_EDGE ( 'NONE', *, *, #667, .F. ) ;
+#555 = ORIENTED_EDGE ( 'NONE', *, *, #450, .T. ) ;
+#556 = EDGE_CURVE ( 'NONE', #338, #137, #707, .T. ) ;
+#557 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636452500, -0.5900217609404193600, 0.01691266797086704200 ) ) ;
+#558 = EDGE_CURVE ( 'NONE', #137, #367, #858, .T. ) ;
+#559 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#560 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#561 = EDGE_LOOP ( 'NONE', ( #720, #629, #576, #476 ) ) ;
+#562 = EDGE_CURVE ( 'NONE', #834, #367, #327, .T. ) ;
+#563 = VECTOR ( 'NONE', #239, 39.37007874015748100 ) ;
+#564 = ORIENTED_EDGE ( 'NONE', *, *, #471, .F. ) ;
+#565 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ;
+#566 = CIRCLE ( 'NONE', #226, 0.07874015748031496000 ) ;
+#567 = EDGE_CURVE ( 'NONE', #834, #232, #838, .T. ) ;
+#568 = EDGE_CURVE ( 'NONE', #753, #232, #525, .T. ) ;
+#569 = EDGE_LOOP ( 'NONE', ( #286, #839, #773, #621 ) ) ;
+#570 = EDGE_CURVE ( 'NONE', #753, #42, #123, .T. ) ;
+#571 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, 0.1968503937007874100 ) ) ;
+#572 = ORIENTED_EDGE ( 'NONE', *, *, #257, .T. ) ;
+#573 = ADVANCED_FACE ( 'NONE', ( #497 ), #366, .T. ) ;
+#574 = EDGE_CURVE ( 'NONE', #608, #670, #480, .T. ) ;
+#575 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -1.263779527559055300 ) ) ;
+#576 = ORIENTED_EDGE ( 'NONE', *, *, #491, .T. ) ;
+#577 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#578 = VECTOR ( 'NONE', #802, 39.37007874015748100 ) ;
+#579 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.03937007874015836100 ) ) ;
+#580 = EDGE_CURVE ( 'NONE', #635, #608, #822, .T. ) ;
+#581 = EDGE_CURVE ( 'NONE', #26, #14, #274, .T. ) ;
+#582 = ORIENTED_EDGE ( 'NONE', *, *, #595, .T. ) ;
+#583 = LINE ( 'NONE', #606, #368 ) ;
+#584 = CARTESIAN_POINT ( 'NONE',  ( -4.716323112443796500, -0.4719115247199389700, 0.0000000000000000000 ) ) ;
+#585 = SHAPE_DEFINITION_REPRESENTATION ( #351, #463 ) ;
+#586 = CARTESIAN_POINT ( 'NONE',  ( 5.683893568161951600, -0.3931713672396239800, 0.0000000000000000000 ) ) ;
+#587 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#588 = ORIENTED_EDGE ( 'NONE', *, *, #536, .F. ) ;
+#589 = EDGE_CURVE ( 'NONE', #766, #61, #679, .T. ) ;
+#590 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.3931713672396237000, 0.0000000000000000000 ) ) ;
+#591 = ORIENTED_EDGE ( 'NONE', *, *, #144, .T. ) ;
+#592 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#593 = EDGE_CURVE ( 'NONE', #512, #635, #654, .T. ) ;
+#594 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3734863278695450000, 0.01968503937007874000 ) ) ;
+#595 = EDGE_CURVE ( 'NONE', #834, #320, #254, .T. ) ;
+#596 = VERTEX_POINT ( 'NONE', #141 ) ;
+#597 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199393600, 0.03937007874015748000 ) ) ;
+#598 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#599 = EDGE_CURVE ( 'NONE', #367, #433, #50, .T. ) ;
+#600 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #634, 'design' ) ;
+#601 = EDGE_CURVE ( 'NONE', #320, #433, #632, .T. ) ;
+#602 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#603 = ORIENTED_EDGE ( 'NONE', *, *, #527, .T. ) ;
+#604 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#605 = LINE ( 'NONE', #538, #761 ) ;
+#606 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204192900, -4.388890002657899800E-015, 0.0000000000000000000 ) ) ;
+#607 = EDGE_CURVE ( 'NONE', #793, #753, #77, .T. ) ;
+#608 = VERTEX_POINT ( 'NONE', #590 ) ;
+#609 = VECTOR ( 'NONE', #381, 39.37007874015748100 ) ;
+#610 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#611 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.241454091480813400E-016 ) ) ;
+#612 = DIRECTION ( 'NONE',  ( -2.253954366339571700E-015, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#613 = ORIENTED_EDGE ( 'NONE', *, *, #570, .T. ) ;
+#614 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#615 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#616 = EDGE_CURVE ( 'NONE', #331, #232, #34, .T. ) ;
+#617 = EDGE_CURVE ( 'NONE', #793, #331, #430, .T. ) ;
+#618 = ORIENTED_EDGE ( 'NONE', *, *, #558, .F. ) ;
+#619 = CYLINDRICAL_SURFACE ( 'NONE', #111, 0.05905511811023622700 ) ;
+#620 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#621 = ORIENTED_EDGE ( 'NONE', *, *, #642, .T. ) ;
+#622 = EDGE_CURVE ( 'NONE', #40, #258, #605, .T. ) ;
+#623 = CARTESIAN_POINT ( 'NONE',  ( -4.621991964224357700, -0.3684747716795990200, 6.762924476502836400E-017 ) ) ;
+#624 = FACE_BOUND ( 'NONE', #715, .T. ) ;
+#625 = EDGE_CURVE ( 'NONE', #352, #68, #17, .T. ) ;
+#626 = CARTESIAN_POINT ( 'NONE',  ( -4.621996116226886100, -0.5753573363603327100, 1.785772217538101000E-017 ) ) ;
+#627 = PLANE ( 'NONE',  #108 ) ;
+#628 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.5703367215703329900, 0.0000000000000000000 ) ) ;
+#629 = ORIENTED_EDGE ( 'NONE', *, *, #488, .F. ) ;
+#630 = EDGE_CURVE ( 'NONE', #352, #258, #411, .T. ) ;
+#631 = CYLINDRICAL_SURFACE ( 'NONE', #354, 0.1181102362204720100 ) ;
+#632 = CIRCLE ( 'NONE', #189, 0.05905511811023622700 ) ;
+#633 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, 0.0000000000000000000 ) ) ;
+#634 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#635 = VERTEX_POINT ( 'NONE', #851 ) ;
+#636 = LINE ( 'NONE', #680, #38 ) ;
+#637 = EDGE_LOOP ( 'NONE', ( #588, #262, #390, #9, #182, #484 ) ) ;
+#638 = EDGE_CURVE ( 'NONE', #833, #91, #744, .T. ) ;
+#639 = EDGE_CURVE ( 'NONE', #756, #796, #884, .T. ) ;
+#640 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #863, 'distance_accuracy_value', 'NONE');
+#641 = EDGE_LOOP ( 'NONE', ( #468, #651, #555, #160 ) ) ;
+#642 = EDGE_CURVE ( 'NONE', #756, #91, #362, .T. ) ;
+#643 = VERTEX_POINT ( 'NONE', #469 ) ;
+#644 = ADVANCED_FACE ( 'NONE', ( #722 ), #170, .F. ) ;
+#645 = FACE_OUTER_BOUND ( 'NONE', #11, .T. ) ;
+#646 = EDGE_CURVE ( 'NONE', #436, #338, #537, .T. ) ;
+#647 = EDGE_CURVE ( 'NONE', #410, #436, #22, .T. ) ;
+#648 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
+#649 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#650 = ADVANCED_FACE ( 'NONE', ( #868 ), #159, .F. ) ;
+#651 = ORIENTED_EDGE ( 'NONE', *, *, #142, .T. ) ;
+#652 = EDGE_CURVE ( 'NONE', #137, #410, #133, .T. ) ;
+#653 = LINE ( 'NONE', #498, #535 ) ;
+#654 = CIRCLE ( 'NONE', #190, 0.01054918080437465200 ) ;
+#655 = EDGE_CURVE ( 'NONE', #658, #782, #847, .T. ) ;
+#656 = ADVANCED_FACE ( 'NONE', ( #832 ), #113, .F. ) ;
+#657 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#658 = VERTEX_POINT ( 'NONE', #472 ) ;
+#659 = LINE ( 'NONE', #8, #434 ) ;
+#660 = FILL_AREA_STYLE ('',( #358 ) ) ;
+#661 = PRESENTATION_STYLE_ASSIGNMENT (( #759 ) ) ;
+#662 = EDGE_CURVE ( 'NONE', #329, #658, #776, .T. ) ;
+#663 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3341162491293874800, 0.1018026156546034400 ) ) ;
+#664 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3931713672396237000, 0.09842519685039372000 ) ) ;
+#665 = FACE_OUTER_BOUND ( 'NONE', #121, .T. ) ;
+#666 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#667 = EDGE_CURVE ( 'NONE', #643, #329, #489, .T. ) ;
+#668 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ;
+#669 = EDGE_CURVE ( 'NONE', #91, #352, #509, .T. ) ;
+#670 = VERTEX_POINT ( 'NONE', #253 ) ;
+#671 = CARTESIAN_POINT ( 'NONE',  ( -4.716323112443796500, -0.4719115247199389700, 0.1968503937007874100 ) ) ;
+#672 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3341162491293874800, 0.09504777804618606800 ) ) ;
+#673 = CARTESIAN_POINT ( 'NONE',  ( 6.403715421571620900E-017, -0.4688193074009389100, 0.1968503937007874100 ) ) ;
+#674 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5506516822002542900, 0.1018026156546035100 ) ) ;
+#675 = ORIENTED_EDGE ( 'NONE', *, *, #617, .T. ) ;
+#676 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#677 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#678 = LINE ( 'NONE', #464, #808 ) ;
+#679 = LINE ( 'NONE', #214, #454 ) ;
+#680 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4688193074009391300, -1.264173228346457100 ) ) ;
+#681 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#682 = ORIENTED_EDGE ( 'NONE', *, *, #534, .T. ) ;
+#683 = VERTEX_POINT ( 'NONE', #179 ) ;
+#684 = VECTOR ( 'NONE', #444, 39.37007874015748100 ) ;
+#685 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, 0.0000000000000000000, 0.03937007874015748000 ) ) ;
+#686 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#687 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#688 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3931713672396237000, 0.1018026156546034400 ) ) ;
+#689 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#690 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#691 = TOROIDAL_SURFACE ( 'NONE', #130, 0.003377418804209481600, 0.05905511811023622700 ) ;
+#692 = ORIENTED_EDGE ( 'NONE', *, *, #387, .T. ) ;
+#693 = ORIENTED_EDGE ( 'NONE', *, *, #567, .T. ) ;
+#694 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#695 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#696 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.03937007874015750800 ) ) ;
+#697 = CYLINDRICAL_SURFACE ( 'NONE', #415, 0.05905511811023622700 ) ;
+#698 = VECTOR ( 'NONE', #719, 39.37007874015748100 ) ;
+#699 = DIRECTION ( 'NONE',  ( -1.365923996832131400E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#700 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#701 = ORIENTED_EDGE ( 'NONE', *, *, #401, .F. ) ;
+#702 = LINE ( 'NONE', #671, #684 ) ;
+#703 = FILL_AREA_STYLE ('',( #758 ) ) ;
+#704 = VECTOR ( 'NONE', #247, 39.37007874015748100 ) ;
+#705 = ORIENTED_EDGE ( 'NONE', *, *, #473, .F. ) ;
+#706 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ;
+#707 = CIRCLE ( 'NONE', #213, 0.01968503937007874000 ) ;
+#708 = ADVANCED_FACE ( 'NONE', ( #89 ), #466, .F. ) ;
+#709 = ORIENTED_EDGE ( 'NONE', *, *, #599, .T. ) ;
+#710 = CYLINDRICAL_SURFACE ( 'NONE', #425, 0.01968503937007874000 ) ;
+#711 = VECTOR ( 'NONE', #357, 39.37007874015748100 ) ;
+#712 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#713 = VERTEX_POINT ( 'NONE', #181 ) ;
+#714 = VECTOR ( 'NONE', #519, 39.37007874015748100 ) ;
+#715 = EDGE_LOOP ( 'NONE', ( #885, #58 ) ) ;
+#716 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#717 = ADVANCED_FACE ( 'NONE', ( #817 ), #64, .T. ) ;
+#718 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.4613623439155638000, -0.03937007874015748000 ) ) ;
+#719 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#720 = ORIENTED_EDGE ( 'NONE', *, *, #486, .T. ) ;
+#721 = SURFACE_STYLE_USAGE ( .BOTH. , #207 ) ;
+#722 = FACE_OUTER_BOUND ( 'NONE', #819, .T. ) ;
+#723 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.156482317317871700E-015, 1.000000000000000000 ) ) ;
+#724 = ORIENTED_EDGE ( 'NONE', *, *, #297, .F. ) ;
+#725 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#726 = EDGE_LOOP ( 'NONE', ( #813, #603, #20, #490 ) ) ;
+#727 = VECTOR ( 'NONE', #612, 39.37007874015748100 ) ;
+#728 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#729 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#730 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#731 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#732 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#733 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#734 = FACE_OUTER_BOUND ( 'NONE', #841, .T. ) ;
+#735 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.1968503937007874100 ) ) ;
+#736 = EDGE_LOOP ( 'NONE', ( #869, #374, #293, #396, #875, #565, #110 ) ) ;
+#737 = ORIENTED_EDGE ( 'NONE', *, *, #380, .F. ) ;
+#738 = VERTEX_POINT ( 'NONE', #559 ) ;
+#739 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.1574803149606308600 ) ) ;
+#740 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#741 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ;
+#742 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#743 = CARTESIAN_POINT ( 'NONE',  ( -4.366958406048766500, -0.4719115247199393600, 0.0000000000000000000 ) ) ;
+#744 = LINE ( 'NONE', #798, #563 ) ;
+#745 = ORIENTED_EDGE ( 'NONE', *, *, #79, .T. ) ;
+#746 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#747 = EDGE_LOOP ( 'NONE', ( #861, #518, #705, #867 ) ) ;
+#748 = VECTOR ( 'NONE', #84, 39.37007874015748100 ) ;
+#749 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, -1.263779527559055300 ) ) ;
+#750 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199393600, -0.03937007874015748000 ) ) ;
+#751 = CARTESIAN_POINT ( 'NONE',  ( -4.629860418636440000, -0.3538012884994818400, 0.01415690383767478700 ) ) ;
+#752 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3538012884994662400, 0.1574803149606311700 ) ) ;
+#753 = VERTEX_POINT ( 'NONE', #815 ) ;
+#754 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#755 = DIRECTION ( 'NONE',  ( -2.586362690585027800E-018, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#756 = VERTEX_POINT ( 'NONE', #336 ) ;
+#757 = ORIENTED_EDGE ( 'NONE', *, *, #545, .T. ) ;
+#758 = FILL_AREA_STYLE_COLOUR ( '', #83 ) ;
+#759 = SURFACE_STYLE_USAGE ( .BOTH. , #255 ) ;
+#760 = ORIENTED_EDGE ( 'NONE', *, *, #282, .F. ) ;
+#761 = VECTOR ( 'NONE', #611, 39.37007874015748100 ) ;
+#762 = ORIENTED_EDGE ( 'NONE', *, *, #570, .F. ) ;
+#763 = FACE_OUTER_BOUND ( 'NONE', #342, .T. ) ;
+#764 = ORIENTED_EDGE ( 'NONE', *, *, #646, .T. ) ;
+#765 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #178 );
+#766 = VERTEX_POINT ( 'NONE', #36 ) ;
+#767 = ADVANCED_FACE ( 'NONE', ( #665 ), #691, .F. ) ;
+#768 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191800, -0.4688193074009391900, 0.03937007874015748000 ) ) ;
+#769 = ORIENTED_EDGE ( 'NONE', *, *, #667, .T. ) ;
+#770 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 8.673617379884035500E-016, 1.000000000000000000 ) ) ;
+#771 = VECTOR ( 'NONE', #835, 39.37007874015748100 ) ;
+#772 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994943300, -1.264173228346457100 ) ) ;
+#773 = ORIENTED_EDGE ( 'NONE', *, *, #639, .F. ) ;
+#774 = LINE ( 'NONE', #843, #209 ) ;
+#775 =( CONVERSION_BASED_UNIT ( 'INCH', #197 ) LENGTH_UNIT ( ) NAMED_UNIT ( #195 ) );
+#776 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #250, #626, #405, #860, #477, #30, #557, #102 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 4 ),
+ ( 1.752873152590130900E-018, 0.0004148735250280262200, 0.0006223102875420309300, 0.0008297470500560357400 ),
+ .UNSPECIFIED. ) ;
+#777 = CARTESIAN_POINT ( 'NONE',  ( -4.952543584884741000, -0.4719115247199389700, 0.1968503937007874100 ) ) ;
+#778 = ORIENTED_EDGE ( 'NONE', *, *, #516, .T. ) ;
+#779 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#780 = ORIENTED_EDGE ( 'NONE', *, *, #662, .T. ) ;
+#781 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.3538012884994662400, 0.03937007874015750100 ) ) ;
+#782 = VERTEX_POINT ( 'NONE', #244 ) ;
+#783 = ORIENTED_EDGE ( 'NONE', *, *, #625, .F. ) ;
+#784 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#785 = CYLINDRICAL_SURFACE ( 'NONE', #335, 0.1181102362204720100 ) ;
+#786 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#787 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#788 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.5506516822002542900, 0.0000000000000000000 ) ) ;
+#789 = EDGE_LOOP ( 'NONE', ( #112, #582, #194, #203 ) ) ;
+#790 = FACE_OUTER_BOUND ( 'NONE', #641, .T. ) ;
+#791 = VECTOR ( 'NONE', #4, 39.37007874015748100 ) ;
+#792 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199393600, -0.03937007874015748000 ) ) ;
+#793 = VERTEX_POINT ( 'NONE', #752 ) ;
+#794 = VECTOR ( 'NONE', #451, 39.37007874015748100 ) ;
+#795 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4719115247199386400, 0.0000000000000000000 ) ) ;
+#796 = VERTEX_POINT ( 'NONE', #856 ) ;
+#797 = CARTESIAN_POINT ( 'NONE',  ( -4.834433348664269700, -0.4719115247199389700, 0.0000000000000000000 ) ) ;
+#798 = CARTESIAN_POINT ( 'NONE',  ( 4.073012111157524400E-019, -0.5900217609404117000, 0.03937007874015751400 ) ) ;
+#799 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#800 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#801 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ;
+#802 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 2.586362690585028100E-018 ) ) ;
+#803 = ORIENTED_EDGE ( 'NONE', *, *, #574, .T. ) ;
+#804 = FACE_OUTER_BOUND ( 'NONE', #849, .T. ) ;
+#805 = PLANE ( 'NONE',  #119 ) ;
+#806 = DIRECTION ( 'NONE',  ( -1.241454091480813400E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#807 = ORIENTED_EDGE ( 'NONE', *, *, #616, .F. ) ;
+#808 = VECTOR ( 'NONE', #238, 39.37007874015748100 ) ;
+#809 = VECTOR ( 'NONE', #511, 39.37007874015748100 ) ;
+#810 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -2.718026293366828700E-017, 0.0000000000000000000 ) ) ;
+#811 =( CONVERSION_BASED_UNIT ( 'INCH', #438 ) LENGTH_UNIT ( ) NAMED_UNIT ( #648 ) );
+#812 = ORIENTED_EDGE ( 'NONE', *, *, #527, .F. ) ;
+#813 = ORIENTED_EDGE ( 'NONE', *, *, #581, .F. ) ;
+#814 = LINE ( 'NONE', #673, #259 ) ;
+#815 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.1574803149606307800 ) ) ;
+#816 = SURFACE_STYLE_FILL_AREA ( #703 ) ;
+#817 = FACE_OUTER_BOUND ( 'NONE', #539, .T. ) ;
+#818 = ORIENTED_EDGE ( 'NONE', *, *, #639, .T. ) ;
+#819 = EDGE_LOOP ( 'NONE', ( #818, #741, #177, #745 ) ) ;
+#820 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#821 = FACE_OUTER_BOUND ( 'NONE', #747, .T. ) ;
+#822 = CIRCLE ( 'NONE', #193, 0.07874015748031496000 ) ;
+#823 = ADVANCED_FACE ( 'NONE', ( #263 ), #805, .F. ) ;
+#824 = PLANE ( 'NONE',  #339 ) ;
+#825 = ORIENTED_EDGE ( 'NONE', *, *, #601, .T. ) ;
+#826 = CIRCLE ( 'NONE', #304, 0.1181102362204720100 ) ;
+#827 = CARTESIAN_POINT ( 'NONE',  ( -4.336569123819207200, -0.5900217609404117000, 0.1574803149606311700 ) ) ;
+#828 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#829 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#830 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#831 = VERTEX_POINT ( 'NONE', #474 ) ;
+#832 = FACE_OUTER_BOUND ( 'NONE', #6, .T. ) ;
+#833 = VERTEX_POINT ( 'NONE', #696 ) ;
+#834 = VERTEX_POINT ( 'NONE', #248 ) ;
+#835 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.241454091480813400E-016 ) ) ;
+#836 = CARTESIAN_POINT ( 'NONE',  ( -4.298767429372826900, -0.4719115247199393600, -0.03937007874015748000 ) ) ;
+#837 = CIRCLE ( 'NONE', #412, 0.2362204724409451000 ) ;
+#838 = LINE ( 'NONE', #284, #698 ) ;
+#839 = ORIENTED_EDGE ( 'NONE', *, *, #514, .T. ) ;
+#840 = CARTESIAN_POINT ( 'NONE',  ( 5.565783331941478500, -0.3341162491293874800, 0.09504777804618487500 ) ) ;
+#841 = EDGE_LOOP ( 'NONE', ( #383, #125, #115, #882 ) ) ;
+#842 = LINE ( 'NONE', #777, #714 ) ;
+#843 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5900217609404117000, 0.1968503937007874100 ) ) ;
+#844 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3538012884994662400, 0.01968503937007874000 ) ) ;
+#845 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.253954366339571700E-015, 0.0000000000000000000 ) ) ;
+#846 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#847 = LINE ( 'NONE', #475, #313 ) ;
+#848 = ORIENTED_EDGE ( 'NONE', *, *, #580, .F. ) ;
+#849 = EDGE_LOOP ( 'NONE', ( #456, #54, #81, #279 ) ) ;
+#850 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#851 = CARTESIAN_POINT ( 'NONE',  ( -4.288218248568452600, -0.4613623439155637400, 0.03937007874015748000 ) ) ;
+#852 = ORIENTED_EDGE ( 'NONE', *, *, #630, .F. ) ;
+#853 = VECTOR ( 'NONE', #85, 39.37007874015748100 ) ;
+#854 = PLANE ( 'NONE',  #370 ) ;
+#855 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#856 = CARTESIAN_POINT ( 'NONE',  ( -1.947195590204191300, -0.5506516822002542900, 0.09504777804618486100 ) ) ;
+#857 = CIRCLE ( 'NONE', #432, 0.003377418804209481600 ) ;
+#858 = LINE ( 'NONE', #431, #711 ) ;
+#859 = CARTESIAN_POINT ( 'NONE',  ( -4.716323112443796500, -0.4719115247199389700, -1.263779527559055300 ) ) ;
+#860 = CARTESIAN_POINT ( 'NONE',  ( -4.627445774367497900, -0.5857567265819899600, 0.007182115282091059900 ) ) ;
+#861 = ORIENTED_EDGE ( 'NONE', *, *, #467, .F. ) ;
+#862 = VECTOR ( 'NONE', #134, 39.37007874015748100 ) ;
+#863 =( CONVERSION_BASED_UNIT ( 'INCH', #765 ) LENGTH_UNIT ( ) NAMED_UNIT ( #423 ) );
+#864 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#865 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#866 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#867 = ORIENTED_EDGE ( 'NONE', *, *, #478, .F. ) ;
+#868 = FACE_OUTER_BOUND ( 'NONE', #241, .T. ) ;
+#869 = ORIENTED_EDGE ( 'NONE', *, *, #545, .F. ) ;
+#870 = ORIENTED_EDGE ( 'NONE', *, *, #655, .T. ) ;
+#871 = LINE ( 'NONE', #685, #853 ) ;
+#872 = ADVANCED_FACE ( 'NONE', ( #240 ), #41, .F. ) ;
+#873 = FACE_OUTER_BOUND ( 'NONE', #736, .T. ) ;
+#874 = CARTESIAN_POINT ( 'NONE',  ( -4.952543584884741000, -0.4719115247199389700, 0.0000000000000000000 ) ) ;
+#875 = ORIENTED_EDGE ( 'NONE', *, *, #473, .T. ) ;
+#876 = VERTEX_POINT ( 'NONE', #859 ) ;
+#877 = ADVANCED_FACE ( 'NONE', ( #443 ), #619, .F. ) ;
+#878 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#879 = CARTESIAN_POINT ( 'NONE',  ( -1.447195590204191500, -0.3734863278695450000, 0.0000000000000000000 ) ) ;
+#880 = ADVANCED_FACE ( 'NONE', ( #290 ), #627, .F. ) ;
+#881 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#882 = ORIENTED_EDGE ( 'NONE', *, *, #652, .F. ) ;
+#883 = PLANE ( 'NONE',  #328 ) ;
+#884 = LINE ( 'NONE', #544, #578 ) ;
+#885 = ORIENTED_EDGE ( 'NONE', *, *, #465, .F. ) ;
+ENDSEC;
+END-ISO-10303-21;