Mirrors
/
fosscad-repo-frozen
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fosscad-repo-frozen/Misc/AR-15-80_Percent_Lower_Rece...
History
ctrlpew 55da6f2e1f Refactored some non critical dimensions for the jig. Replaced Buildtoshoots jig. 2019-08-20 13:07:45 -05:00
..
SLDPRT Refactored some non critical dimensions for the jig. Replaced Buildtoshoots jig. 2019-08-20 13:07:45 -05:00
STEP Refactored some non critical dimensions for the jig. Replaced Buildtoshoots jig. 2019-08-20 13:07:45 -05:00
STL Refactored some non critical dimensions for the jig. Replaced Buildtoshoots jig. 2019-08-20 13:07:45 -05:00
SpecSheets Refactored some non critical dimensions for the jig. Replaced Buildtoshoots jig. 2019-08-20 13:07:45 -05:00
renders Refactored some non critical dimensions for the jig. Replaced Buildtoshoots jig. 2019-08-20 13:07:45 -05:00
README.md Refactored some non critical dimensions for the jig. Replaced Buildtoshoots jig. 2019-08-20 13:07:45 -05:00

README.md

80% AR-15 Lower Receiver Milling Jig

Author, Testing & Technical Author

CTRL+Pew

Version

1.0

Description

This is the 80% AR-15 Lower Receiver Milling Jig by CTRL+Pew. This is a self-aligning jig which allows one to finish 80% lowers from a variety of manufacturers using only a drill press and a few common tools.

Mill following the instructions from SpecSheets/Jig_Manual_80_Percent_Arms.rev1.1S.doc.pdf skipping the drilling step since i didnt make a drilling plate.

Find me on the internet for more shenanigans. https://www.ctrlpew.com

Hardware

Sides
Top

Print

  • 1x LeftSideWall.STL
  • 1x RightSideWall.STL
  • 1x TopShelfPocket.STL
  • 1x TopShelfTrigger&Shelf.STL
  • 2x spacer.stl - These go on the 1/4 bolts on the bottom of the jig to help mitigate flex while in the vise.