fosscad-repo/Rifles/AR-15_Vanguard_Lower_Receiv.../README.md

# Vanguard AR-15 Receiver 

#### Author
shadowfall

#### Version 
1.2

#### Description 
The Vanguard series is designed to minimize support material and add ease of printing to the lower design. #### Instructions Set support settings to .40 (40 degrees). If your printer cannot print 40 degree overhangs a higher number may be chosen, this will increase printing time. An 8" build platform is required for this version. The model should be oriented horizontally as seen in the renders. 

#### Changelog Vanguard 1.2
*fixed overhang in trigger pocket so trigger springs function
*smoothed rough edges near bolt hold open.

#### Changelog Vanguard 1.1
* fixed cosmetic defects near mag release

#### Changelog Vanguard 1.0 
* based off the hermes 1.3.3 model 
* increased depth of front take down lug recess. 
* removed portions of the bottom of the trigger pocket -added spring guides for the trigger.
* expanded buffer end plate hole. 
* redesigned magwell profile for ease of printing. 
* removed majority of fillets. 
* reprofiled the buffer reinforcement to reduce support required.
Adding the Vanguard AR-15 Lower Receiver by shadowfall. 2014-02-19 02:49:35 -07:00			`# Vanguard AR-15 Receiver`

			`#### Author`
			`shadowfall`

			`#### Version`
Upgrading the Vanguard AR-15 lower receiver to version 1.2 by shadowfall. 2014-02-26 21:58:29 -07:00			`1.2`
Adding the Vanguard AR-15 Lower Receiver by shadowfall. 2014-02-19 02:49:35 -07:00
			`#### Description`
			`The Vanguard series is designed to minimize support material and add ease of printing to the lower design. #### Instructions Set support settings to .40 (40 degrees). If your printer cannot print 40 degree overhangs a higher number may be chosen, this will increase printing time. An 8" build platform is required for this version. The model should be oriented horizontally as seen in the renders.`

Upgrading the Vanguard AR-15 lower receiver to version 1.2 by shadowfall. 2014-02-26 21:58:29 -07:00			`#### Changelog Vanguard 1.2`
			`*fixed overhang in trigger pocket so trigger springs function`
			`*smoothed rough edges near bolt hold open.`

Upgrading the Vanguard AR-15 lower receiver to v1.1 by shadowfall. 2014-02-20 01:26:06 -07:00			`#### Changelog Vanguard 1.1`
			`* fixed cosmetic defects near mag release`

Adding the Vanguard AR-15 Lower Receiver by shadowfall. 2014-02-19 02:49:35 -07:00			`#### Changelog Vanguard 1.0`
			`* based off the hermes 1.3.3 model`
			`* increased depth of front take down lug recess.`
			`* removed portions of the bottom of the trigger pocket -added spring guides for the trigger.`
			`* expanded buffer end plate hole.`
			`* redesigned magwell profile for ease of printing.`
			`* removed majority of fillets.`
			`* reprofiled the buffer reinforcement to reduce support required.`