From 0057abc692306ce5f6410b120ba339e73bc21f6b Mon Sep 17 00:00:00 2001 From: ma deuce Date: Wed, 9 Sep 2015 11:14:18 -0700 Subject: [PATCH] Fixing typo and grammer in Readme.md. --- Rifles/AR-15_Bolt_Lower_Receiver-RollTroll/Readme.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Rifles/AR-15_Bolt_Lower_Receiver-RollTroll/Readme.md b/Rifles/AR-15_Bolt_Lower_Receiver-RollTroll/Readme.md index bb3ea83..1a27f5e 100644 --- a/Rifles/AR-15_Bolt_Lower_Receiver-RollTroll/Readme.md +++ b/Rifles/AR-15_Bolt_Lower_Receiver-RollTroll/Readme.md @@ -31,8 +31,8 @@ Print/make 1 of all: * Buffer tower should be printed flat, perpendicular to the print bed, as if the stock were vertical, * Grip part should be printed on its side. -* Mag well front should be printed with the pivot holes away from the print bed. So that the face that is profiled for the * mag well is against the print bed. -* Mag well back should be printed with the largest falt side against the print bed. This is the side opposite the mag well. +* Mag well front should be printed with the pivot holes away from the print bed so that the face that is profiled for the mag well is against the print bed. +* Mag well back should be printed with the largest flat side against the print bed. This is the side opposite the mag well. * Both mag well sides should be printed on their largest flat face, the side opposite the mag well. * Both left and right (rear) sides should be printed with the internal facing (flattest) sides against the print bed. * Fire control well bottom should be printed flat, so the side facing the trigger guard is against the print bed.