Updating README.md changelog.
This commit is contained in:
ma deuce
parent
8f29eda508
commit
019aeedac1
|
|
@ -0,0 +1,25 @@
|
|||
# WarFairy Angel Grip
|
||||
|
||||
#### Author
|
||||
WarFairy
|
||||
|
||||
#### Version
|
||||
2.0
|
||||
|
||||
#### Changelog
|
||||
* Grip Angle Reduced slightly
|
||||
* Thumb shelves smoothed significantly to keep thumb from catching between rail interface and shelf upon recoil.
|
||||
* Significant reshaping of the grip.
|
||||
* Rail interface now actually fits rails.
|
||||
|
||||
#### Description
|
||||
Alright, I'm bloody TIRED of seeing people trying to control their rifles by putting their thumb over some silly thick rail system on their race guns. This grip is meant to fix that. The wings on either side are thumb rests. This allows you to lay your thumb along side the rifle, using your fingers to clench the grip itself. This will allow side to side tracking movements and very fast target acquisition. For fucks sake, STOP PUTTING YOUR DAMNED THUMBS OVER THE BORE.
|
||||
|
||||
#### Printing
|
||||
A split version of this part has been added in STL format (Angel_Grip_V2_Left.stl and Angel_Grip_V2_Right.stl). This is going to be a bit more efficient to print in my opinion. This also allows printers with smaller print beds to print the part. After printing the two parts use either abs-juice or another solvent (i.e., MEK) to weld the parts together.
|
||||
|
||||
Print the grip from back to front. You will need support material turned on. I highly recommend Meshmixer to do smart supports. Do NOT print side to side or bottom to top, or top to bottom. If you print side to side, the rail channel will snap down the sides of the grip. If you print top to bottom or bottom to top, the rail guides in the channel will peel away from the rail itself. Print the plug however you like.
|
||||
|
||||
Glue plug into place once you have the grip situated where you'd like it to be on your rail system. The nubs on the plug will lock the grip into place. You WILL have to cut away the grip should you wish to remove it.
|
||||
|
||||
Happy Hunting my friends. As always, You are Free Men. Act like it!
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 212 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 129 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 101 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 160 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 96 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 105 KiB |
Binary file not shown.
Binary file not shown.
|
|
@ -0,0 +1,736 @@
|
|||
ISO-10303-21;
|
||||
HEADER;
|
||||
FILE_DESCRIPTION (( 'STEP AP214' ),
|
||||
'1' );
|
||||
FILE_NAME ('Angel_Grip_Lock_V2.STEP',
|
||||
'2013-11-20T15:55:39',
|
||||
( 'WarFairy' ),
|
||||
( '' ),
|
||||
'SwSTEP 2.0',
|
||||
'SolidWorks 2013',
|
||||
'' );
|
||||
FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
|
||||
ENDSEC;
|
||||
|
||||
DATA;
|
||||
#1 = EDGE_CURVE ( 'NONE', #259, #236, #282, .T. ) ;
|
||||
#2 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #212, 'distance_accuracy_value', 'NONE');
|
||||
#3 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #312 ) ) ;
|
||||
#4 = ORIENTED_EDGE ( 'NONE', *, *, #48, .F. ) ;
|
||||
#5 = AXIS2_PLACEMENT_3D ( 'NONE', #296, #514, #508 ) ;
|
||||
#6 = ADVANCED_FACE ( 'NONE', ( #588 ), #550, .T. ) ;
|
||||
#7 = EDGE_CURVE ( 'NONE', #351, #567, #77, .T. ) ;
|
||||
#8 = ORIENTED_EDGE ( 'NONE', *, *, #183, .T. ) ;
|
||||
#9 = CARTESIAN_POINT ( 'NONE', ( 94.25909633107976000, -21.18410679292781800, 7.476320089622866800 ) ) ;
|
||||
#10 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Angel_Grip_Lock_V2', ( #62, #63 ), #42 ) ;
|
||||
#11 = VECTOR ( 'NONE', #423, 1000.000000000000100 ) ;
|
||||
#12 = CARTESIAN_POINT ( 'NONE', ( 84.22631374939334100, -16.36636868884373200, 7.736914082388898900 ) ) ;
|
||||
#13 = CIRCLE ( 'NONE', #188, 9.905999999999981000 ) ;
|
||||
#14 = CARTESIAN_POINT ( 'NONE', ( 84.35995169440157300, -21.44461059915618500, 7.736914082388897100 ) ) ;
|
||||
#15 = EDGE_CURVE ( 'NONE', #16, #647, #13, .T. ) ;
|
||||
#16 = VERTEX_POINT ( 'NONE', #551 ) ;
|
||||
#17 = LINE ( 'NONE', #158, #88 ) ;
|
||||
#18 = ORIENTED_EDGE ( 'NONE', *, *, #542, .F. ) ;
|
||||
#19 = EDGE_CURVE ( 'NONE', #221, #616, #469, .T. ) ;
|
||||
#20 = EDGE_CURVE ( 'NONE', #168, #324, #33, .T. ) ;
|
||||
#21 = EDGE_CURVE ( 'NONE', #290, #522, #138, .T. ) ;
|
||||
#22 = ORIENTED_EDGE ( 'NONE', *, *, #599, .F. ) ;
|
||||
#23 = ORIENTED_EDGE ( 'NONE', *, *, #115, .T. ) ;
|
||||
#24 = LINE ( 'NONE', #171, #634 ) ;
|
||||
#25 = ADVANCED_FACE ( 'NONE', ( #153 ), #326, .F. ) ;
|
||||
#26 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ;
|
||||
#27 = PRESENTATION_STYLE_ASSIGNMENT (( #577 ) ) ;
|
||||
#28 = DIRECTION ( 'NONE', ( -0.02630668208823198900, 0.9996539193528473100, 0.0000000000000000000 ) ) ;
|
||||
#29 = ORIENTED_EDGE ( 'NONE', *, *, #538, .F. ) ;
|
||||
#30 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #53 ), #54 ) ;
|
||||
#31 = SURFACE_STYLE_USAGE ( .BOTH. , #49 ) ;
|
||||
#32 = ORIENTED_EDGE ( 'NONE', *, *, #119, .F. ) ;
|
||||
#33 = LINE ( 'NONE', #529, #318 ) ;
|
||||
#34 = AXIS2_PLACEMENT_3D ( 'NONE', #181, #198, #175 ) ;
|
||||
#35 = ORIENTED_EDGE ( 'NONE', *, *, #385, .F. ) ;
|
||||
#36 = AXIS2_PLACEMENT_3D ( 'NONE', #167, #170, #166 ) ;
|
||||
#37 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #53 ) ) ;
|
||||
#38 = EDGE_LOOP ( 'NONE', ( #680, #602, #490, #438, #398, #418, #94, #525, #323, #159, #386, #274 ) ) ;
|
||||
#39 = ADVANCED_FACE ( 'NONE', ( #288 ), #637, .T. ) ;
|
||||
#40 = EDGE_CURVE ( 'NONE', #236, #237, #320, .T. ) ;
|
||||
#41 = AXIS2_PLACEMENT_3D ( 'NONE', #196, #186, #182 ) ;
|
||||
#42 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #673 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #148, #629, #147 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#43 = ORIENTED_EDGE ( 'NONE', *, *, #554, .F. ) ;
|
||||
#44 = ORIENTED_EDGE ( 'NONE', *, *, #51, .T. ) ;
|
||||
#45 = VECTOR ( 'NONE', #200, 1000.000000000000100 ) ;
|
||||
#46 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #47, #206, #205, #202 ),
|
||||
.UNSPECIFIED., .F., .T. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 1.570796326794892300, 2.445758826232442100 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9372144182104513700, 0.9372144182104513700, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#47 = CARTESIAN_POINT ( 'NONE', ( 83.82900619002207100, -9.008274038340918100, 4.336808689942017700E-015 ) ) ;
|
||||
#48 = EDGE_CURVE ( 'NONE', #583, #576, #654, .T. ) ;
|
||||
#49 = SURFACE_SIDE_STYLE ('',( #383 ) ) ;
|
||||
#50 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ;
|
||||
#51 = EDGE_CURVE ( 'NONE', #583, #633, #615, .T. ) ;
|
||||
#52 = EDGE_CURVE ( 'NONE', #324, #259, #377, .T. ) ;
|
||||
#53 = STYLED_ITEM ( 'NONE', ( #419 ), #10 ) ;
|
||||
#54 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #2 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #212, #197, #185 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#55 = CARTESIAN_POINT ( 'NONE', ( 91.85969542397299400, -25.05856794581645300, 0.0000000000000000000 ) ) ;
|
||||
#56 = ADVANCED_FACE ( 'NONE', ( #399 ), #107, .F. ) ;
|
||||
#57 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #305, #315, #491, #257 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 3.141592653589792700, 3.701252216424742300 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9740683101695527500, 0.9740683101695527500, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#58 = EDGE_LOOP ( 'NONE', ( #664, #580, #101, #43, #533 ) ) ;
|
||||
#59 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ;
|
||||
#60 = FILL_AREA_STYLE ('',( #97 ) ) ;
|
||||
#61 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#62 = MANIFOLD_SOLID_BREP ( 'Body-Move/Copy1', #271 ) ;
|
||||
#63 = AXIS2_PLACEMENT_3D ( 'NONE', #646, #184, #187 ) ;
|
||||
#64 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#65 = LINE ( 'NONE', #162, #571 ) ;
|
||||
#66 = CARTESIAN_POINT ( 'NONE', ( 100.5126476140483300, -24.83085867765658300, 1.474514954580286000E-014 ) ) ;
|
||||
#67 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #194, #614 ) ;
|
||||
#68 = ADVANCED_FACE ( 'NONE', ( #373 ), #623, .T. ) ;
|
||||
#69 = DIRECTION ( 'NONE', ( -0.9993079584775086400, -0.02629757785467084400, 0.02630668208823237800 ) ) ;
|
||||
#70 = CIRCLE ( 'NONE', #501, 2.539999999999995600 ) ;
|
||||
#71 = EDGE_LOOP ( 'NONE', ( #608, #22, #607, #411 ) ) ;
|
||||
#72 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ;
|
||||
#73 = ORIENTED_EDGE ( 'NONE', *, *, #20, .F. ) ;
|
||||
#74 = EDGE_CURVE ( 'NONE', #567, #351, #155, .T. ) ;
|
||||
#75 = ADVANCED_FACE ( 'NONE', ( #192 ), #122, .T. ) ;
|
||||
#76 = VERTEX_POINT ( 'NONE', #497 ) ;
|
||||
#77 = CIRCLE ( 'NONE', #667, 2.539999999999995600 ) ;
|
||||
#78 = VERTEX_POINT ( 'NONE', #55 ) ;
|
||||
#79 = ADVANCED_FACE ( 'NONE', ( #545 ), #669, .T. ) ;
|
||||
#80 = EDGE_CURVE ( 'NONE', #470, #355, #558, .T. ) ;
|
||||
#81 = ADVANCED_FACE ( 'NONE', ( #142 ), #477, .F. ) ;
|
||||
#82 = VECTOR ( 'NONE', #502, 1000.000000000000100 ) ;
|
||||
#83 = CARTESIAN_POINT ( 'NONE', ( 0.7225503649584631400, -27.45691386842205600, 0.0000000000000000000 ) ) ;
|
||||
#84 = VERTEX_POINT ( 'NONE', #484 ) ;
|
||||
#85 = FACE_OUTER_BOUND ( 'NONE', #71, .T. ) ;
|
||||
#86 = CIRCLE ( 'NONE', #96, 9.905999999999981000 ) ;
|
||||
#87 = ORIENTED_EDGE ( 'NONE', *, *, #339, .T. ) ;
|
||||
#88 = VECTOR ( 'NONE', #152, 1000.000000000000100 ) ;
|
||||
#89 = EDGE_CURVE ( 'NONE', #240, #260, #349, .T. ) ;
|
||||
#90 = AXIS2_PLACEMENT_3D ( 'NONE', #263, #679, #444 ) ;
|
||||
#91 = DIRECTION ( 'NONE', ( 0.02630668208823238500, -0.9996539193528470900, 1.734723475976806700E-018 ) ) ;
|
||||
#92 = ORIENTED_EDGE ( 'NONE', *, *, #74, .F. ) ;
|
||||
#93 = ORIENTED_EDGE ( 'NONE', *, *, #404, .T. ) ;
|
||||
#94 = ORIENTED_EDGE ( 'NONE', *, *, #1, .T. ) ;
|
||||
#95 = ORIENTED_EDGE ( 'NONE', *, *, #165, .F. ) ;
|
||||
#96 = AXIS2_PLACEMENT_3D ( 'NONE', #287, #266, #482 ) ;
|
||||
#97 = FILL_AREA_STYLE_COLOUR ( '', #120 ) ;
|
||||
#98 = DIRECTION ( 'NONE', ( -0.02630668208823238800, 0.9996539193528472000, 1.209969624493823200E-016 ) ) ;
|
||||
#99 = ORIENTED_EDGE ( 'NONE', *, *, #19, .T. ) ;
|
||||
#100 = ORIENTED_EDGE ( 'NONE', *, *, #74, .T. ) ;
|
||||
#101 = ORIENTED_EDGE ( 'NONE', *, *, #303, .F. ) ;
|
||||
#102 = ADVANCED_FACE ( 'NONE', ( #662 ), #141, .T. ) ;
|
||||
#103 = ADVANCED_FACE ( 'NONE', ( #85 ), #208, .F. ) ;
|
||||
#104 = ORIENTED_EDGE ( 'NONE', *, *, #21, .F. ) ;
|
||||
#105 = VERTEX_POINT ( 'NONE', #443 ) ;
|
||||
#106 = EDGE_CURVE ( 'NONE', #260, #598, #86, .T. ) ;
|
||||
#107 = PLANE ( 'NONE', #552 ) ;
|
||||
#108 = ORIENTED_EDGE ( 'NONE', *, *, #671, .F. ) ;
|
||||
#109 = AXIS2_PLACEMENT_3D ( 'NONE', #331, #476, #682 ) ;
|
||||
#110 = CYLINDRICAL_SURFACE ( 'NONE', #573, 2.539999999999995600 ) ;
|
||||
#111 = CARTESIAN_POINT ( 'NONE', ( 89.70260699499330300, -27.16074130687105300, 5.059444368017159900 ) ) ;
|
||||
#112 = ORIENTED_EDGE ( 'NONE', *, *, #251, .T. ) ;
|
||||
#113 = ORIENTED_EDGE ( 'NONE', *, *, #213, .T. ) ;
|
||||
#114 = CARTESIAN_POINT ( 'NONE', ( 67.66655275152780300, -12.99083284924382300, 9.540979117872439000E-015 ) ) ;
|
||||
#115 = EDGE_CURVE ( 'NONE', #616, #470, #376, .T. ) ;
|
||||
#116 = CIRCLE ( 'NONE', #316, 2.539999999999995600 ) ;
|
||||
#117 = EDGE_CURVE ( 'NONE', #598, #345, #547, .T. ) ;
|
||||
#118 = EDGE_CURVE ( 'NONE', #290, #105, #57, .T. ) ;
|
||||
#119 = EDGE_CURVE ( 'NONE', #345, #481, #639, .T. ) ;
|
||||
#120 = COLOUR_RGB ( '',0.8666666666666667000, 0.9098039215686274400, 1.000000000000000000 ) ;
|
||||
#121 = ORIENTED_EDGE ( 'NONE', *, *, #1, .F. ) ;
|
||||
#122 = CYLINDRICAL_SURFACE ( 'NONE', #636, 2.539999999999995600 ) ;
|
||||
#123 = AXIS2_PLACEMENT_3D ( 'NONE', #420, #413, #390 ) ;
|
||||
#124 = ORIENTED_EDGE ( 'NONE', *, *, #468, .F. ) ;
|
||||
#125 = EDGE_CURVE ( 'NONE', #481, #140, #618, .T. ) ;
|
||||
#126 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #401, #415, #532, #531 ),
|
||||
.UNSPECIFIED., .F., .F. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 3.837426480947133900, 5.587351479822235200 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.7606837606837613100, 0.7606837606837613100, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#127 = VERTEX_POINT ( 'NONE', #243 ) ;
|
||||
#128 = ORIENTED_EDGE ( 'NONE', *, *, #80, .F. ) ;
|
||||
#129 = EDGE_CURVE ( 'NONE', #355, #470, #134, .T. ) ;
|
||||
#130 = ADVANCED_FACE ( 'NONE', ( #283 ), #285, .T. ) ;
|
||||
#131 = EDGE_LOOP ( 'NONE', ( #627, #26 ) ) ;
|
||||
#132 = ADVANCED_FACE ( 'NONE', ( #397 ), #619, .T. ) ;
|
||||
#133 = ADVANCED_FACE ( 'NONE', ( #366 ), #585, .T. ) ;
|
||||
#134 = CIRCLE ( 'NONE', #346, 2.539999999999995600 ) ;
|
||||
#135 = ORIENTED_EDGE ( 'NONE', *, *, #339, .F. ) ;
|
||||
#136 = VERTEX_POINT ( 'NONE', #595 ) ;
|
||||
#137 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#138 = LINE ( 'NONE', #458, #269 ) ;
|
||||
#139 = AXIS2_PLACEMENT_3D ( 'NONE', #417, #359, #562 ) ;
|
||||
#140 = VERTEX_POINT ( 'NONE', #272 ) ;
|
||||
#141 = CYLINDRICAL_SURFACE ( 'NONE', #509, 2.539999999999995600 ) ;
|
||||
#142 = FACE_OUTER_BOUND ( 'NONE', #596, .T. ) ;
|
||||
#143 = CARTESIAN_POINT ( 'NONE', ( 84.29313272189745000, -18.90548964399996000, 7.736914082388898000 ) ) ;
|
||||
#144 = EDGE_LOOP ( 'NONE', ( #180, #645 ) ) ;
|
||||
#145 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ;
|
||||
#146 = ORIENTED_EDGE ( 'NONE', *, *, #303, .T. ) ;
|
||||
#147 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#148 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#149 = CARTESIAN_POINT ( 'NONE', ( 89.26093358674114600, -10.37715179328835500, 5.059444368017162600 ) ) ;
|
||||
#150 = CARTESIAN_POINT ( 'NONE', ( 84.00548641079231500, -9.003629822004855400, 6.708570095550603800 ) ) ;
|
||||
#151 = EDGE_CURVE ( 'NONE', #481, #16, #563, .T. ) ;
|
||||
#152 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#153 = FACE_OUTER_BOUND ( 'NONE', #584, .T. ) ;
|
||||
#154 = CARTESIAN_POINT ( 'NONE', ( 85.87672074625163500, -8.954386813176979500, 6.659310038770411400 ) ) ;
|
||||
#155 = CIRCLE ( 'NONE', #378, 2.539999999999995600 ) ;
|
||||
#156 = CARTESIAN_POINT ( 'NONE', ( 87.67517338763910600, -9.424416124586162600, 6.094967096796661800 ) ) ;
|
||||
#157 = CARTESIAN_POINT ( 'NONE', ( 89.26093358674114600, -10.37715179328835500, 5.059444368017162600 ) ) ;
|
||||
#158 = CARTESIAN_POINT ( 'NONE', ( 69.84513304150219400, -12.93350178898135100, 82.81471158800845000 ) ) ;
|
||||
#159 = ORIENTED_EDGE ( 'NONE', *, *, #106, .T. ) ;
|
||||
#160 = CARTESIAN_POINT ( 'NONE', ( 84.29315584665070600, -21.44636838462331200, 5.197793127232665200 ) ) ;
|
||||
#161 = DIRECTION ( 'NONE', ( -0.9993079584775086400, -0.02629757785467084400, 0.02630668208823237800 ) ) ;
|
||||
#162 = CARTESIAN_POINT ( 'NONE', ( 101.8643548108869900, -10.04548281370557700, 4.727660564480939500 ) ) ;
|
||||
#163 = DIRECTION ( 'NONE', ( 0.9996539193528470900, 0.02630668208823237800, 6.938893903907226800E-018 ) ) ;
|
||||
#164 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #173 ) ;
|
||||
#165 = EDGE_CURVE ( 'NONE', #648, #298, #430, .T. ) ;
|
||||
#166 = DIRECTION ( 'NONE', ( 0.02630668208823436600, -0.9996539193528472000, -3.414809992080334900E-016 ) ) ;
|
||||
#167 = CARTESIAN_POINT ( 'NONE', ( 84.29313272189745000, -18.90548964399996000, 7.736914082388898000 ) ) ;
|
||||
#168 = VERTEX_POINT ( 'NONE', #474 ) ;
|
||||
#169 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#170 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#171 = CARTESIAN_POINT ( 'NONE', ( 0.3884555024379119400, -14.76130909264089800, 0.0000000000000000000 ) ) ;
|
||||
#172 = CARTESIAN_POINT ( 'NONE', ( 74.46080705772338600, -21.70511440538455600, 7.997508075154927500 ) ) ;
|
||||
#173 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#174 = CARTESIAN_POINT ( 'NONE', ( 91.99117049054953600, -25.05510807564338500, 4.997782165595375600 ) ) ;
|
||||
#175 = DIRECTION ( 'NONE', ( -0.03719682892492674800, 0.7063727179606924500, -0.7068620652141078800 ) ) ;
|
||||
#176 = PRODUCT_CONTEXT ( 'NONE', #256, 'mechanical' ) ;
|
||||
#177 = ORIENTED_EDGE ( 'NONE', *, *, #19, .F. ) ;
|
||||
#178 = PLANE ( 'NONE', #34 ) ;
|
||||
#179 = CARTESIAN_POINT ( 'NONE', ( 84.15951790164247400, -16.36812647431085900, 5.197793127232666100 ) ) ;
|
||||
#180 = ORIENTED_EDGE ( 'NONE', *, *, #445, .F. ) ;
|
||||
#181 = CARTESIAN_POINT ( 'NONE', ( 102.4363026688877800, -29.30300141773514600, 7.203303495758268200 ) ) ;
|
||||
#182 = DIRECTION ( 'NONE', ( -0.9996539193528470900, -0.02630668208823238500, -6.938893903907226800E-018 ) ) ;
|
||||
#183 = EDGE_CURVE ( 'NONE', #576, #572, #473, .T. ) ;
|
||||
#184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
|
||||
#185 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#186 = DIRECTION ( 'NONE', ( -6.983011888186826800E-018, 1.585197968576701800E-018, 1.000000000000000000 ) ) ;
|
||||
#187 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#188 = AXIS2_PLACEMENT_3D ( 'NONE', #631, #169, #565 ) ;
|
||||
#189 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#190 = DIRECTION ( 'NONE', ( 0.02630668208823238800, -0.9996539193528472000, -1.209969624493823200E-016 ) ) ;
|
||||
#191 = CARTESIAN_POINT ( 'NONE', ( 94.12545838607152900, -16.10586488261536400, 7.476320089622868500 ) ) ;
|
||||
#192 = FACE_OUTER_BOUND ( 'NONE', #210, .T. ) ;
|
||||
#193 = CARTESIAN_POINT ( 'NONE', ( 84.29313272189745000, -18.90548964399996000, 7.736914082388898000 ) ) ;
|
||||
#194 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #312, .NOT_KNOWN. ) ;
|
||||
#195 = VECTOR ( 'NONE', #416, 1000.000000000000100 ) ;
|
||||
#196 = CARTESIAN_POINT ( 'NONE', ( 0.1946804821759920100, -7.397858322687819000, 0.0000000000000000000 ) ) ;
|
||||
#197 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#198 = DIRECTION ( 'NONE', ( 6.437665288846345700E-006, -0.7073514124675242000, -0.7068620652141087700 ) ) ;
|
||||
#199 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#200 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#201 = DIRECTION ( 'NONE', ( -0.9996539193528470900, -0.02630668208823237800, -6.938893903907226800E-018 ) ) ;
|
||||
#202 = CARTESIAN_POINT ( 'NONE', ( 91.52560056145242100, -12.36296317003529300, 1.387778780781445700E-014 ) ) ;
|
||||
#203 = CARTESIAN_POINT ( 'NONE', ( 78.49209702936988700, -12.70595010509010000, 82.58708112561944900 ) ) ;
|
||||
#204 = PLANE ( 'NONE', #41 ) ;
|
||||
#205 = CARTESIAN_POINT ( 'NONE', ( 89.55168521730995200, -10.12285589732063500, 4.361019790988708600E-015 ) ) ;
|
||||
#206 = CARTESIAN_POINT ( 'NONE', ( 86.81428446109650600, -8.929714083838957700, 4.340013122986383900E-015 ) ) ;
|
||||
#207 = DIRECTION ( 'NONE', ( 0.02630668208823436600, -0.9996539193528472000, 0.0000000000000000000 ) ) ;
|
||||
#208 = PLANE ( 'NONE', #329 ) ;
|
||||
#209 = CARTESIAN_POINT ( 'NONE', ( 74.39398808521927700, -19.16599345022832800, 7.997508075154927500 ) ) ;
|
||||
#210 = EDGE_LOOP ( 'NONE', ( #380, #247, #8, #421 ) ) ;
|
||||
#211 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#212 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#213 = EDGE_CURVE ( 'NONE', #260, #240, #483, .T. ) ;
|
||||
#214 = CARTESIAN_POINT ( 'NONE', ( 83.82900619002207100, -9.008274038340918100, 4.336808689942017700E-015 ) ) ;
|
||||
#215 = CARTESIAN_POINT ( 'NONE', ( 100.3040396158966800, -12.13195161597097500, 4.770151703206387600 ) ) ;
|
||||
#216 = CARTESIAN_POINT ( 'NONE', ( 76.79559812026418800, -25.45499155907194200, 5.397804088870010700 ) ) ;
|
||||
#217 = CARTESIAN_POINT ( 'NONE', ( 94.12548151082477000, -18.64674362323871300, 4.937199134466637500 ) ) ;
|
||||
#218 = CARTESIAN_POINT ( 'NONE', ( 99.98477773126586500, -4.771803131922339100, 8.673617379884035500E-016 ) ) ;
|
||||
#219 = LINE ( 'NONE', #466, #361 ) ;
|
||||
#220 = CARTESIAN_POINT ( 'NONE', ( 94.25909633107976000, -21.18410679292781800, 7.476320089622866800 ) ) ;
|
||||
#221 = VERTEX_POINT ( 'NONE', #594 ) ;
|
||||
#222 = CARTESIAN_POINT ( 'NONE', ( 74.39401120997251800, -21.70687219085168400, 5.458387119998693700 ) ) ;
|
||||
#223 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#224 = DIRECTION ( 'NONE', ( -0.02630668208823198900, 0.9996539193528473100, 0.0000000000000000000 ) ) ;
|
||||
#225 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912060200, -0.9996539193528472000 ) ) ;
|
||||
#226 = CARTESIAN_POINT ( 'NONE', ( 70.17922790402275300, -25.62910656476251200, 82.81471158800845000 ) ) ;
|
||||
#227 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#228 = DIRECTION ( 'NONE', ( -0.9996539193528470900, -0.02630668208823237800, -6.938893903907226800E-018 ) ) ;
|
||||
#229 = EDGE_CURVE ( 'NONE', #572, #633, #364, .T. ) ;
|
||||
#230 = DIRECTION ( 'NONE', ( -0.03719682892492677500, 0.7063727179606919000, -0.7068620652141086600 ) ) ;
|
||||
#231 = CARTESIAN_POINT ( 'NONE', ( 0.7225503649584631400, -27.45691386842205600, 0.0000000000000000000 ) ) ;
|
||||
#232 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
|
||||
#233 = LINE ( 'NONE', #218, #516 ) ;
|
||||
#234 = DIRECTION ( 'NONE', ( -0.02630668208823198900, 0.9996539193528473100, 8.755923056616244200E-017 ) ) ;
|
||||
#235 = DIRECTION ( 'NONE', ( 6.437665288886572100E-006, -0.7073514124675248600, -0.7068620652141081000 ) ) ;
|
||||
#236 = VERTEX_POINT ( 'NONE', #216 ) ;
|
||||
#237 = VERTEX_POINT ( 'NONE', #250 ) ;
|
||||
#238 = CARTESIAN_POINT ( 'NONE', ( 84.22633687414658300, -18.90724742946708400, 5.197793127232665200 ) ) ;
|
||||
#239 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
|
||||
#240 = VERTEX_POINT ( 'NONE', #505 ) ;
|
||||
#241 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#242 = DIRECTION ( 'NONE', ( -0.9993079584775087500, -0.02629757785467085100, 0.02630668208823238800 ) ) ;
|
||||
#243 = CARTESIAN_POINT ( 'NONE', ( 91.52560056145242100, -12.36296317003529300, 1.387778780781445700E-014 ) ) ;
|
||||
#244 = CARTESIAN_POINT ( 'NONE', ( 102.3346333875229300, -12.07851493777029400, 81.95942873995585400 ) ) ;
|
||||
#245 = CARTESIAN_POINT ( 'NONE', ( 101.8643322642525700, -7.568126041597797600, 7.203303495758270900 ) ) ;
|
||||
#246 = DIRECTION ( 'NONE', ( 0.02630668208823238500, -0.9996539193528470900, 1.733522975301390200E-018 ) ) ;
|
||||
#247 = ORIENTED_EDGE ( 'NONE', *, *, #589, .F. ) ;
|
||||
#248 = CARTESIAN_POINT ( 'NONE', ( 102.5016808187832000, -18.42631732566087500, 81.95942873995585400 ) ) ;
|
||||
#249 = PLANE ( 'NONE', #328 ) ;
|
||||
#250 = CARTESIAN_POINT ( 'NONE', ( 76.65359980412372900, -25.45872835686510900, 9.540979117872439000E-015 ) ) ;
|
||||
#251 = EDGE_CURVE ( 'NONE', #567, #84, #219, .T. ) ;
|
||||
#252 = DIRECTION ( 'NONE', ( -0.02630668208822918200, 0.9996539193528473100, 0.0000000000000000000 ) ) ;
|
||||
#253 = CARTESIAN_POINT ( 'NONE', ( 84.22633687414658300, -18.90724742946708400, 5.197793127232665200 ) ) ;
|
||||
#254 = CARTESIAN_POINT ( 'NONE', ( 2.419049274064177400, -14.70787241444021900, 84.58969650139484000 ) ) ;
|
||||
#255 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#256 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
|
||||
#257 = CARTESIAN_POINT ( 'NONE', ( 78.75006675329987600, -10.65375355206312100, 5.336141886448172200 ) ) ;
|
||||
#258 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#259 = VERTEX_POINT ( 'NONE', #606 ) ;
|
||||
#260 = VERTEX_POINT ( 'NONE', #408 ) ;
|
||||
#261 = EDGE_CURVE ( 'NONE', #633, #572, #70, .T. ) ;
|
||||
#262 = ADVANCED_FACE ( 'NONE', ( #630 ), #310, .F. ) ;
|
||||
#263 = CARTESIAN_POINT ( 'NONE', ( 86.25693064577285400, -18.85381075126640100, 82.38707016398214500 ) ) ;
|
||||
#264 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#265 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #612 ), #350 ) ;
|
||||
#266 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#267 = ADVANCED_FACE ( 'NONE', ( #622, #652, #661, #448 ), #451, .F. ) ;
|
||||
#268 = ORIENTED_EDGE ( 'NONE', *, *, #404, .F. ) ;
|
||||
#269 = VECTOR ( 'NONE', #494, 1000.000000000000100 ) ;
|
||||
#270 = CARTESIAN_POINT ( 'NONE', ( 78.82619189189047400, -25.40155488087125900, 82.58708112561944900 ) ) ;
|
||||
#271 = CLOSED_SHELL ( 'NONE', ( #327, #102, #132, #428, #133, #75, #381, #6, #39, #130, #79, #570, #402, #267, #81, #25, #56, #68, #262, #388, #103, #568 ) ) ;
|
||||
#272 = CARTESIAN_POINT ( 'NONE', ( 100.1785527515277700, -12.13525390187541900, 3.035766082959412400E-014 ) ) ;
|
||||
#273 = EDGE_LOOP ( 'NONE', ( #389, #92, #112, #447 ) ) ;
|
||||
#274 = ORIENTED_EDGE ( 'NONE', *, *, #119, .T. ) ;
|
||||
#275 = AXIS2_PLACEMENT_3D ( 'NONE', #600, #225, #224 ) ;
|
||||
#276 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912060200, -0.9996539193528472000 ) ) ;
|
||||
#277 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#278 = CARTESIAN_POINT ( 'NONE', ( 101.9181440837527800, -12.08947518260634100, 4.727660564480939500 ) ) ;
|
||||
#279 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ;
|
||||
#280 = VECTOR ( 'NONE', #307, 1000.000000000000200 ) ;
|
||||
#281 = DIRECTION ( 'NONE', ( 0.02629757785467086100, 0.0006920415224912062400, 0.9996539193528472000 ) ) ;
|
||||
#282 = LINE ( 'NONE', #518, #11 ) ;
|
||||
#283 = FACE_OUTER_BOUND ( 'NONE', #384, .T. ) ;
|
||||
#284 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#285 = PLANE ( 'NONE', #611 ) ;
|
||||
#286 = CARTESIAN_POINT ( 'NONE', ( 102.2522389462733500, -24.78507995838749900, 4.727660564480937700 ) ) ;
|
||||
#287 = CARTESIAN_POINT ( 'NONE', ( 84.22633687414658300, -18.90724742946708400, 5.197793127232665200 ) ) ;
|
||||
#288 = FACE_OUTER_BOUND ( 'NONE', #609, .T. ) ;
|
||||
#289 = CARTESIAN_POINT ( 'NONE', ( 74.32719223746839500, -19.16775123569545200, 5.458387119998695500 ) ) ;
|
||||
#290 = VERTEX_POINT ( 'NONE', #333 ) ;
|
||||
#291 = ORIENTED_EDGE ( 'NONE', *, *, #80, .T. ) ;
|
||||
#292 = CARTESIAN_POINT ( 'NONE', ( 84.22633687414658300, -18.90724742946708400, 5.197793127232666100 ) ) ;
|
||||
#293 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#294 = VECTOR ( 'NONE', #189, 1000.000000000000200 ) ;
|
||||
#295 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#296 = CARTESIAN_POINT ( 'NONE', ( 2.419049274064177400, -14.70787241444021900, 84.58969650139484000 ) ) ;
|
||||
#297 = SURFACE_SIDE_STYLE ('',( #306 ) ) ;
|
||||
#298 = VERTEX_POINT ( 'NONE', #321 ) ;
|
||||
#299 = DIRECTION ( 'NONE', ( 0.02630668208823237800, -0.9996539193528470900, -1.206050777741824600E-016 ) ) ;
|
||||
#300 = CARTESIAN_POINT ( 'NONE', ( 82.60601434543866600, -29.42031700817722100, 7.320519699487858700 ) ) ;
|
||||
#301 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912061300, -0.9996539193528473100 ) ) ;
|
||||
#302 = CARTESIAN_POINT ( 'NONE', ( 86.50633600580222500, -29.31767696448343900, 7.217844121763694600 ) ) ;
|
||||
#303 = EDGE_CURVE ( 'NONE', #298, #522, #506, .T. ) ;
|
||||
#304 = CARTESIAN_POINT ( 'NONE', ( 94.19227735857565200, -18.64498583777159300, 7.476320089622867600 ) ) ;
|
||||
#305 = CARTESIAN_POINT ( 'NONE', ( 84.00548641079231500, -9.003629822004855400, 6.708570095550603800 ) ) ;
|
||||
#306 = SURFACE_STYLE_FILL_AREA ( #657 ) ;
|
||||
#307 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#308 = ORIENTED_EDGE ( 'NONE', *, *, #358, .T. ) ;
|
||||
#309 = EDGE_CURVE ( 'NONE', #345, #535, #456, .T. ) ;
|
||||
#310 = PLANE ( 'NONE', #519 ) ;
|
||||
#311 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#312 = PRODUCT ( 'Angel_Grip_Lock_V2', 'Angel_Grip_Lock_V2', '', ( #176 ) ) ;
|
||||
#313 = CARTESIAN_POINT ( 'NONE', ( 84.35995169440157300, -21.44461059915618500, 7.736914082388897100 ) ) ;
|
||||
#314 = CARTESIAN_POINT ( 'NONE', ( 84.29313272189745000, -18.90548964399996000, 7.736914082388898000 ) ) ;
|
||||
#315 = CARTESIAN_POINT ( 'NONE', ( 82.13425207533300900, -9.052872830832729500, 6.757830152330822800 ) ) ;
|
||||
#316 = AXIS2_PLACEMENT_3D ( 'NONE', #217, #223, #61 ) ;
|
||||
#317 = CARTESIAN_POINT ( 'NONE', ( 74.46080705772338600, -21.70511440538455600, 7.997508075154927500 ) ) ;
|
||||
#318 = VECTOR ( 'NONE', #496, 1000.000000000000100 ) ;
|
||||
#319 = ORIENTED_EDGE ( 'NONE', *, *, #340, .T. ) ;
|
||||
#320 = LINE ( 'NONE', #270, #393 ) ;
|
||||
#321 = CARTESIAN_POINT ( 'NONE', ( 76.31950494160315700, -12.76312358108395100, -8.673617379884035500E-016 ) ) ;
|
||||
#322 = AXIS2_PLACEMENT_3D ( 'NONE', #330, #353, #638 ) ;
|
||||
#323 = ORIENTED_EDGE ( 'NONE', *, *, #213, .F. ) ;
|
||||
#324 = VERTEX_POINT ( 'NONE', #521 ) ;
|
||||
#325 = CARTESIAN_POINT ( 'NONE', ( 78.17286943217152400, -10.42229841798216900, 4.282036060763058400E-015 ) ) ;
|
||||
#326 = PLANE ( 'NONE', #139 ) ;
|
||||
#327 = ADVANCED_FACE ( 'NONE', ( #644 ), #492, .T. ) ;
|
||||
#328 = AXIS2_PLACEMENT_3D ( 'NONE', #245, #230, #235 ) ;
|
||||
#329 = AXIS2_PLACEMENT_3D ( 'NONE', #254, #190, #258 ) ;
|
||||
#330 = CARTESIAN_POINT ( 'NONE', ( 94.19227735857565200, -18.64498583777159300, 7.476320089622867600 ) ) ;
|
||||
#331 = CARTESIAN_POINT ( 'NONE', ( 102.3060282191391700, -26.82907232728826900, 4.727660564480937700 ) ) ;
|
||||
#332 = EDGE_CURVE ( 'NONE', #78, #237, #126, .T. ) ;
|
||||
#333 = CARTESIAN_POINT ( 'NONE', ( 84.00548641079231500, -9.003629822004855400, 6.708570095550603800 ) ) ;
|
||||
#334 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912059100, 0.9996539193528470900 ) ) ;
|
||||
#335 = EDGE_CURVE ( 'NONE', #16, #127, #441, .T. ) ;
|
||||
#336 = EDGE_LOOP ( 'NONE', ( #581, #23, #291, #135 ) ) ;
|
||||
#337 = ORIENTED_EDGE ( 'NONE', *, *, #52, .F. ) ;
|
||||
#338 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #433, #431 ) ;
|
||||
#339 = EDGE_CURVE ( 'NONE', #221, #355, #462, .T. ) ;
|
||||
#340 = EDGE_CURVE ( 'NONE', #76, #648, #464, .T. ) ;
|
||||
#341 = CARTESIAN_POINT ( 'NONE', ( 94.19227735857565200, -18.64498583777159300, 7.476320089622867600 ) ) ;
|
||||
#342 = AXIS2_PLACEMENT_3D ( 'NONE', #209, #211, #207 ) ;
|
||||
#343 = CARTESIAN_POINT ( 'NONE', ( 67.47277773126589300, -5.627382079290746300, -8.673617379884035500E-016 ) ) ;
|
||||
#344 = AXIS2_PLACEMENT_3D ( 'NONE', #510, #480, #299 ) ;
|
||||
#345 = VERTEX_POINT ( 'NONE', #642 ) ;
|
||||
#346 = AXIS2_PLACEMENT_3D ( 'NONE', #289, #597, #277 ) ;
|
||||
#347 = CARTESIAN_POINT ( 'NONE', ( 80.84372791894762100, -9.086833992842871400, 4.298569721834041700E-015 ) ) ;
|
||||
#348 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#349 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #434, #300, #302, #111 ),
|
||||
.UNSPECIFIED., .F., .T. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 2.581933090754843900, 3.701252216424742800 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8982905982905991000, 0.8982905982905991000, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#350 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #517 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #232, #311, #239 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
|
||||
#351 = VERTEX_POINT ( 'NONE', #9 ) ;
|
||||
#352 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#353 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912061300, -0.9996539193528473100 ) ) ;
|
||||
#354 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ;
|
||||
#355 = VERTEX_POINT ( 'NONE', #526 ) ;
|
||||
#356 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#357 = FILL_AREA_STYLE_COLOUR ( '', #632 ) ;
|
||||
#358 = EDGE_CURVE ( 'NONE', #598, #78, #548, .T. ) ;
|
||||
#359 = DIRECTION ( 'NONE', ( 0.9993079584775087500, 0.02629757785467085100, -0.02630668208823238800 ) ) ;
|
||||
#360 = DIRECTION ( 'NONE', ( 0.02630668208823436600, -0.9996539193528472000, -3.414809992080334900E-016 ) ) ;
|
||||
#361 = VECTOR ( 'NONE', #352, 1000.000000000000200 ) ;
|
||||
#362 = CARTESIAN_POINT ( 'NONE', ( 102.3060282191391700, -26.82907232728826900, 4.727660564480937700 ) ) ;
|
||||
#363 = EDGE_CURVE ( 'NONE', #136, #84, #515, .T. ) ;
|
||||
#364 = CIRCLE ( 'NONE', #382, 2.539999999999995600 ) ;
|
||||
#365 = CARTESIAN_POINT ( 'NONE', ( 94.19227735857565200, -18.64498583777159300, 7.476320089622867600 ) ) ;
|
||||
#366 = FACE_OUTER_BOUND ( 'NONE', #369, .T. ) ;
|
||||
#367 = ORIENTED_EDGE ( 'NONE', *, *, #48, .T. ) ;
|
||||
#368 = PLANE ( 'NONE', #392 ) ;
|
||||
#369 = EDGE_LOOP ( 'NONE', ( #104, #569, #145, #590, #674 ) ) ;
|
||||
#370 = CARTESIAN_POINT ( 'NONE', ( 94.02176426217580700, -25.00167139744270600, 82.18705920234481300 ) ) ;
|
||||
#371 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ;
|
||||
#372 = CARTESIAN_POINT ( 'NONE', ( 84.22633687414658300, -18.90724742946708400, 5.197793127232666100 ) ) ;
|
||||
#373 = FACE_OUTER_BOUND ( 'NONE', #672, .T. ) ;
|
||||
#374 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ;
|
||||
#375 = CARTESIAN_POINT ( 'NONE', ( 93.68766939965523500, -12.30606662166154700, 82.18705920234481300 ) ) ;
|
||||
#376 = LINE ( 'NONE', #317, #624 ) ;
|
||||
#377 = LINE ( 'NONE', #556, #195 ) ;
|
||||
#378 = AXIS2_PLACEMENT_3D ( 'NONE', #304, #137, #435 ) ;
|
||||
#379 = CARTESIAN_POINT ( 'NONE', ( 74.39398808521927700, -19.16599345022832800, 7.997508075154927500 ) ) ;
|
||||
#380 = ORIENTED_EDGE ( 'NONE', *, *, #51, .F. ) ;
|
||||
#381 = ADVANCED_FACE ( 'NONE', ( #546 ), #110, .T. ) ;
|
||||
#382 = AXIS2_PLACEMENT_3D ( 'NONE', #292, #295, #503 ) ;
|
||||
#383 = SURFACE_STYLE_FILL_AREA ( #60 ) ;
|
||||
#384 = EDGE_LOOP ( 'NONE', ( #99, #613 ) ) ;
|
||||
#385 = EDGE_CURVE ( 'NONE', #236, #240, #489, .T. ) ;
|
||||
#386 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ;
|
||||
#387 = CARTESIAN_POINT ( 'NONE', ( 94.12548151082477000, -18.64674362323871300, 4.937199134466637500 ) ) ;
|
||||
#388 = ADVANCED_FACE ( 'NONE', ( #511 ), #368, .F. ) ;
|
||||
#389 = ORIENTED_EDGE ( 'NONE', *, *, #471, .F. ) ;
|
||||
#390 = DIRECTION ( 'NONE', ( 0.02630668208823237800, -0.9996539193528470900, -1.206050777741824600E-016 ) ) ;
|
||||
#391 = DIRECTION ( 'NONE', ( -0.02630668208823238500, 0.9996539193528470900, -1.734723475976806700E-018 ) ) ;
|
||||
#392 = AXIS2_PLACEMENT_3D ( 'NONE', #248, #242, #246 ) ;
|
||||
#393 = VECTOR ( 'NONE', #264, 1000.000000000000100 ) ;
|
||||
#394 = DIRECTION ( 'NONE', ( 0.02630668208823436600, -0.9996539193528472000, 0.0000000000000000000 ) ) ;
|
||||
#395 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 0.0000000000000000000 ) ) ;
|
||||
#396 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #67 ) ;
|
||||
#397 = FACE_OUTER_BOUND ( 'NONE', #593, .T. ) ;
|
||||
#398 = ORIENTED_EDGE ( 'NONE', *, *, #20, .T. ) ;
|
||||
#399 = FACE_OUTER_BOUND ( 'NONE', #410, .T. ) ;
|
||||
#400 = EDGE_CURVE ( 'NONE', #105, #168, #500, .T. ) ;
|
||||
#401 = CARTESIAN_POINT ( 'NONE', ( 91.85969542397299400, -25.05856794581645300, 0.0000000000000000000 ) ) ;
|
||||
#402 = ADVANCED_FACE ( 'NONE', ( #437 ), #249, .F. ) ;
|
||||
#403 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#404 = EDGE_CURVE ( 'NONE', #237, #76, #635, .T. ) ;
|
||||
#405 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#406 = FACE_OUTER_BOUND ( 'NONE', #650, .T. ) ;
|
||||
#407 = EDGE_LOOP ( 'NONE', ( #544, #177, #87, #371 ) ) ;
|
||||
#408 = CARTESIAN_POINT ( 'NONE', ( 89.70260699499330300, -27.16074130687105300, 5.059444368017159900 ) ) ;
|
||||
#409 = CARTESIAN_POINT ( 'NONE', ( 2.753144136584728700, -27.40347719022137700, 84.58969650139484000 ) ) ;
|
||||
#410 = EDGE_LOOP ( 'NONE', ( #561, #268, #626, #121 ) ) ;
|
||||
#411 = ORIENTED_EDGE ( 'NONE', *, *, #151, .F. ) ;
|
||||
#412 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#413 = DIRECTION ( 'NONE', ( 0.02629757785467086100, 0.0006920415224912062400, 0.9996539193528472000 ) ) ;
|
||||
#414 = CARTESIAN_POINT ( 'NONE', ( 74.32716911271515400, -16.62687249507210300, 7.997508075154927500 ) ) ;
|
||||
#415 = CARTESIAN_POINT ( 'NONE', ( 87.72285912483263800, -30.28344980469522700, 4.380207609150785600E-015 ) ) ;
|
||||
#416 = DIRECTION ( 'NONE', ( 0.02630668208823237800, -0.9996539193528470900, -1.206875737830802800E-016 ) ) ;
|
||||
#417 = CARTESIAN_POINT ( 'NONE', ( 70.01218047276248100, -19.28130417687193800, 82.81471158800845000 ) ) ;
|
||||
#418 = ORIENTED_EDGE ( 'NONE', *, *, #52, .T. ) ;
|
||||
#419 = PRESENTATION_STYLE_ASSIGNMENT (( #31 ) ) ;
|
||||
#420 = CARTESIAN_POINT ( 'NONE', ( 94.19227735857565200, -18.64498583777159300, 7.476320089622867600 ) ) ;
|
||||
#421 = ORIENTED_EDGE ( 'NONE', *, *, #229, .T. ) ;
|
||||
#422 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#423 = DIRECTION ( 'NONE', ( 0.9993079584775086400, 0.02629757785467084400, -0.02630668208823237800 ) ) ;
|
||||
#424 = ORIENTED_EDGE ( 'NONE', *, *, #7, .F. ) ;
|
||||
#425 = AXIS2_PLACEMENT_3D ( 'NONE', #660, #276, #28 ) ;
|
||||
#426 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 0.0000000000000000000 ) ) ;
|
||||
#427 = CARTESIAN_POINT ( 'NONE', ( 74.39398808521927700, -19.16599345022832800, 7.997508075154927500 ) ) ;
|
||||
#428 = ADVANCED_FACE ( 'NONE', ( #442 ), #553, .T. ) ;
|
||||
#429 = VECTOR ( 'NONE', #555, 1000.000000000000100 ) ;
|
||||
#430 = LINE ( 'NONE', #487, #540 ) ;
|
||||
#431 = DIRECTION ( 'NONE', ( 0.02630668208823436600, -0.9996539193528472000, -3.414809992080334900E-016 ) ) ;
|
||||
#432 = ORIENTED_EDGE ( 'NONE', *, *, #332, .T. ) ;
|
||||
#433 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#434 = CARTESIAN_POINT ( 'NONE', ( 79.19174016155203300, -27.43734306564581600, 5.336141886448171300 ) ) ;
|
||||
#435 = DIRECTION ( 'NONE', ( 0.02630668208823436600, -0.9996539193528472000, -3.414809992080334900E-016 ) ) ;
|
||||
#436 = CARTESIAN_POINT ( 'NONE', ( 76.31950494160315700, -12.76312358108395100, -8.673617379884035500E-016 ) ) ;
|
||||
#437 = FACE_OUTER_BOUND ( 'NONE', #557, .T. ) ;
|
||||
#438 = ORIENTED_EDGE ( 'NONE', *, *, #400, .T. ) ;
|
||||
#439 = LINE ( 'NONE', #226, #560 ) ;
|
||||
#440 = VECTOR ( 'NONE', #228, 1000.000000000000100 ) ;
|
||||
#441 = LINE ( 'NONE', #375, #549 ) ;
|
||||
#442 = FACE_OUTER_BOUND ( 'NONE', #58, .T. ) ;
|
||||
#443 = CARTESIAN_POINT ( 'NONE', ( 78.75006675329987600, -10.65375355206312100, 5.336141886448172200 ) ) ;
|
||||
#444 = DIRECTION ( 'NONE', ( -0.02630668208823198900, 0.9996539193528473100, 0.0000000000000000000 ) ) ;
|
||||
#445 = EDGE_CURVE ( 'NONE', #84, #136, #116, .T. ) ;
|
||||
#446 = LINE ( 'NONE', #220, #578 ) ;
|
||||
#447 = ORIENTED_EDGE ( 'NONE', *, *, #445, .T. ) ;
|
||||
#448 = FACE_BOUND ( 'NONE', #144, .T. ) ;
|
||||
#449 = VECTOR ( 'NONE', #499, 1000.000000000000100 ) ;
|
||||
#450 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ;
|
||||
#451 = PLANE ( 'NONE', #109 ) ;
|
||||
#452 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#453 = ORIENTED_EDGE ( 'NONE', *, *, #554, .T. ) ;
|
||||
#454 = ORIENTED_EDGE ( 'NONE', *, *, #641, .T. ) ;
|
||||
#455 = AXIS2_PLACEMENT_3D ( 'NONE', #193, #601, #284 ) ;
|
||||
#456 = LINE ( 'NONE', #534, #457 ) ;
|
||||
#457 = VECTOR ( 'NONE', #582, 1000.000000000000100 ) ;
|
||||
#458 = CARTESIAN_POINT ( 'NONE', ( 85.99633665300683600, -8.951239026157116600, 82.38707016398214500 ) ) ;
|
||||
#459 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912061300, -0.9996539193528473100 ) ) ;
|
||||
#460 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#461 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#462 = LINE ( 'NONE', #414, #537 ) ;
|
||||
#463 = ORIENTED_EDGE ( 'NONE', *, *, #599, .T. ) ;
|
||||
#464 = LINE ( 'NONE', #343, #512 ) ;
|
||||
#465 = EDGE_LOOP ( 'NONE', ( #653, #367 ) ) ;
|
||||
#466 = CARTESIAN_POINT ( 'NONE', ( 94.12545838607152900, -16.10586488261536400, 7.476320089622868500 ) ) ;
|
||||
#467 = CIRCLE ( 'NONE', #342, 2.539999999999995600 ) ;
|
||||
#468 = EDGE_CURVE ( 'NONE', #259, #76, #439, .T. ) ;
|
||||
#469 = CIRCLE ( 'NONE', #651, 2.539999999999995600 ) ;
|
||||
#470 = VERTEX_POINT ( 'NONE', #222 ) ;
|
||||
#471 = EDGE_CURVE ( 'NONE', #351, #136, #446, .T. ) ;
|
||||
#472 = AXIS2_PLACEMENT_3D ( 'NONE', #238, #241, #234 ) ;
|
||||
#473 = LINE ( 'NONE', #478, #294 ) ;
|
||||
#474 = CARTESIAN_POINT ( 'NONE', ( 76.46150325774363000, -12.75938678329078100, 5.397804088870010700 ) ) ;
|
||||
#475 = SHAPE_DEFINITION_REPRESENTATION ( #396, #10 ) ;
|
||||
#476 = DIRECTION ( 'NONE', ( -0.02629757785467086100, -0.0006920415224912062400, -0.9996539193528472000 ) ) ;
|
||||
#477 = PLANE ( 'NONE', #5 ) ;
|
||||
#478 = CARTESIAN_POINT ( 'NONE', ( 84.22631374939334100, -16.36636868884373200, 7.736914082388898900 ) ) ;
|
||||
#479 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ;
|
||||
#480 = DIRECTION ( 'NONE', ( 0.02629757785467086100, 0.0006920415224912062400, 0.9996539193528472000 ) ) ;
|
||||
#481 = VERTEX_POINT ( 'NONE', #215 ) ;
|
||||
#482 = DIRECTION ( 'NONE', ( -0.02630668208823198900, 0.9996539193528473100, 8.755923056616244200E-017 ) ) ;
|
||||
#483 = LINE ( 'NONE', #362, #429 ) ;
|
||||
#484 = CARTESIAN_POINT ( 'NONE', ( 94.05866253832066100, -16.10762266808249200, 4.937199134466637500 ) ) ;
|
||||
#485 = CARTESIAN_POINT ( 'NONE', ( 74.32719223746839500, -19.16775123569545200, 5.458387119998695500 ) ) ;
|
||||
#486 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #256 ) ;
|
||||
#487 = CARTESIAN_POINT ( 'NONE', ( 0.3884555024379119400, -14.76130909264089800, 0.0000000000000000000 ) ) ;
|
||||
#488 = DIRECTION ( 'NONE', ( 0.9996539193528470900, 0.02630668208823237800, 6.938893903907226800E-018 ) ) ;
|
||||
#489 = CIRCLE ( 'NONE', #592, 9.905999999999982800 ) ;
|
||||
#490 = ORIENTED_EDGE ( 'NONE', *, *, #625, .T. ) ;
|
||||
#491 = CARTESIAN_POINT ( 'NONE', ( 80.33580885096350200, -9.617557296603934000, 6.288175134377124400 ) ) ;
|
||||
#492 = CYLINDRICAL_SURFACE ( 'NONE', #663, 2.539999999999995600 ) ;
|
||||
#493 = VECTOR ( 'NONE', #201, 1000.000000000000100 ) ;
|
||||
#494 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#495 = EDGE_CURVE ( 'NONE', #616, #221, #467, .T. ) ;
|
||||
#496 = DIRECTION ( 'NONE', ( -0.9993079584775086400, -0.02629757785467084400, 0.02630668208823237800 ) ) ;
|
||||
#497 = CARTESIAN_POINT ( 'NONE', ( 68.00064761404836100, -25.68643762502498300, 3.382710778154773800E-014 ) ) ;
|
||||
#498 = CARTESIAN_POINT ( 'NONE', ( 100.6919237512830300, -26.87154876065290000, 4.770151703206360900 ) ) ;
|
||||
#499 = DIRECTION ( 'NONE', ( -0.02630668208823237800, 0.9996539193528470900, 1.206875737830802800E-016 ) ) ;
|
||||
#500 = CIRCLE ( 'NONE', #472, 9.905999999999981000 ) ;
|
||||
#501 = AXIS2_PLACEMENT_3D ( 'NONE', #372, #422, #199 ) ;
|
||||
#502 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#503 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#504 = VECTOR ( 'NONE', #523, 1000.000000000000100 ) ;
|
||||
#505 = CARTESIAN_POINT ( 'NONE', ( 79.19174016155203300, -27.43734306564581600, 5.336141886448171300 ) ) ;
|
||||
#506 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #436, #325, #347, #603 ),
|
||||
.UNSPECIFIED., .F., .T. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 0.6958338273573404500, 1.570796326794892300 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9372144182104511500, 0.9372144182104511500, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#507 = ORIENTED_EDGE ( 'NONE', *, *, #7, .T. ) ;
|
||||
#508 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#509 = AXIS2_PLACEMENT_3D ( 'NONE', #427, #459, #426 ) ;
|
||||
#510 = CARTESIAN_POINT ( 'NONE', ( 84.29313272189745000, -18.90548964399996000, 7.736914082388898000 ) ) ;
|
||||
#511 = FACE_OUTER_BOUND ( 'NONE', #640, .T. ) ;
|
||||
#512 = VECTOR ( 'NONE', #391, 1000.000000000000100 ) ;
|
||||
#513 = ORIENTED_EDGE ( 'NONE', *, *, #332, .F. ) ;
|
||||
#514 = DIRECTION ( 'NONE', ( 0.02630668208823238800, -0.9996539193528472000, -1.209969624493823200E-016 ) ) ;
|
||||
#515 = CIRCLE ( 'NONE', #665, 2.539999999999995600 ) ;
|
||||
#516 = VECTOR ( 'NONE', #91, 1000.000000000000100 ) ;
|
||||
#517 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #232, 'distance_accuracy_value', 'NONE');
|
||||
#518 = CARTESIAN_POINT ( 'NONE', ( 102.2522389462733500, -24.78507995838749900, 4.727660564480937700 ) ) ;
|
||||
#519 = AXIS2_PLACEMENT_3D ( 'NONE', #409, #98, #334 ) ;
|
||||
#520 = ORIENTED_EDGE ( 'NONE', *, *, #471, .T. ) ;
|
||||
#521 = CARTESIAN_POINT ( 'NONE', ( 67.81453926987593700, -12.98693846718203200, 5.625434551258997800 ) ) ;
|
||||
#522 = VERTEX_POINT ( 'NONE', #214 ) ;
|
||||
#523 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#524 = EDGE_LOOP ( 'NONE', ( #72, #128 ) ) ;
|
||||
#525 = ORIENTED_EDGE ( 'NONE', *, *, #385, .T. ) ;
|
||||
#526 = CARTESIAN_POINT ( 'NONE', ( 74.26037326496428600, -16.62863028053923000, 5.458387119998695500 ) ) ;
|
||||
#527 = LINE ( 'NONE', #83, #493 ) ;
|
||||
#528 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912061300, -0.9996539193528473100 ) ) ;
|
||||
#529 = CARTESIAN_POINT ( 'NONE', ( 101.9181440837527800, -12.08947518260634100, 4.727660564480939500 ) ) ;
|
||||
#530 = EDGE_CURVE ( 'NONE', #522, #127, #46, .T. ) ;
|
||||
#531 = CARTESIAN_POINT ( 'NONE', ( 76.65359980412372900, -25.45872835686510900, 9.540979117872439000E-015 ) ) ;
|
||||
#532 = CARTESIAN_POINT ( 'NONE', ( 81.05951385321327500, -30.45880099605362200, 4.333955356256302800E-015 ) ) ;
|
||||
#533 = ORIENTED_EDGE ( 'NONE', *, *, #400, .F. ) ;
|
||||
#534 = CARTESIAN_POINT ( 'NONE', ( 102.6687282500434900, -24.77411971355145300, 81.95942873995585400 ) ) ;
|
||||
#535 = VERTEX_POINT ( 'NONE', #66 ) ;
|
||||
#536 = ORIENTED_EDGE ( 'NONE', *, *, #542, .T. ) ;
|
||||
#537 = VECTOR ( 'NONE', #405, 1000.000000000000200 ) ;
|
||||
#538 = EDGE_CURVE ( 'NONE', #140, #535, #233, .T. ) ;
|
||||
#539 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ;
|
||||
#540 = VECTOR ( 'NONE', #488, 1000.000000000000100 ) ;
|
||||
#541 =( BOUNDED_CURVE ( ) B_SPLINE_CURVE ( 3, ( #157, #156, #154, #150 ),
|
||||
.UNSPECIFIED., .F., .T. )
|
||||
B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
|
||||
( 2.581933090754843000, 3.141592653589792700 ),
|
||||
.UNSPECIFIED. )
|
||||
CURVE ( ) GEOMETRIC_REPRESENTATION_ITEM ( ) RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9740683101695527500, 0.9740683101695527500, 1.000000000000000000 ) )
|
||||
REPRESENTATION_ITEM ( '' ) );
|
||||
#542 = EDGE_CURVE ( 'NONE', #535, #78, #527, .T. ) ;
|
||||
#543 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #612 ) ) ;
|
||||
#544 = ORIENTED_EDGE ( 'NONE', *, *, #115, .F. ) ;
|
||||
#545 = FACE_OUTER_BOUND ( 'NONE', #465, .T. ) ;
|
||||
#546 = FACE_OUTER_BOUND ( 'NONE', #407, .T. ) ;
|
||||
#547 = LINE ( 'NONE', #286, #621 ) ;
|
||||
#548 = LINE ( 'NONE', #370, #504 ) ;
|
||||
#549 = VECTOR ( 'NONE', #678, 1000.000000000000100 ) ;
|
||||
#550 = CYLINDRICAL_SURFACE ( 'NONE', #322, 2.539999999999995600 ) ;
|
||||
#551 = CARTESIAN_POINT ( 'NONE', ( 91.65707562802897700, -12.35950329986222600, 4.997782165595375600 ) ) ;
|
||||
#552 = AXIS2_PLACEMENT_3D ( 'NONE', #586, #656, #676 ) ;
|
||||
#553 = CYLINDRICAL_SURFACE ( 'NONE', #275, 9.905999999999981000 ) ;
|
||||
#554 = EDGE_CURVE ( 'NONE', #168, #298, #575, .T. ) ;
|
||||
#555 = DIRECTION ( 'NONE', ( -0.9993079584775086400, -0.02629757785467084400, 0.02630668208823237800 ) ) ;
|
||||
#556 = CARTESIAN_POINT ( 'NONE', ( 68.20242340526229400, -27.72653561186395900, 5.625434551258970300 ) ) ;
|
||||
#557 = EDGE_LOOP ( 'NONE', ( #658, #454, #539 ) ) ;
|
||||
#558 = CIRCLE ( 'NONE', #677, 2.539999999999995600 ) ;
|
||||
#559 = EDGE_LOOP ( 'NONE', ( #681, #146, #628, #463, #666, #536, #432, #93, #319 ) ) ;
|
||||
#560 = VECTOR ( 'NONE', #227, 1000.000000000000100 ) ;
|
||||
#561 = ORIENTED_EDGE ( 'NONE', *, *, #468, .T. ) ;
|
||||
#562 = DIRECTION ( 'NONE', ( -0.02630668208823238500, 0.9996539193528470900, -1.733522975301390200E-018 ) ) ;
|
||||
#563 = LINE ( 'NONE', #278, #683 ) ;
|
||||
#564 = EDGE_LOOP ( 'NONE', ( #424, #520, #655, #566 ) ) ;
|
||||
#565 = DIRECTION ( 'NONE', ( -0.02630668208822358300, 0.9996539193528475300, -8.755923056616244200E-017 ) ) ;
|
||||
#566 = ORIENTED_EDGE ( 'NONE', *, *, #251, .F. ) ;
|
||||
#567 = VERTEX_POINT ( 'NONE', #191 ) ;
|
||||
#568 = ADVANCED_FACE ( 'NONE', ( #670 ), #204, .F. ) ;
|
||||
#569 = ORIENTED_EDGE ( 'NONE', *, *, #641, .F. ) ;
|
||||
#570 = ADVANCED_FACE ( 'NONE', ( #406 ), #178, .F. ) ;
|
||||
#571 = VECTOR ( 'NONE', #161, 1000.000000000000100 ) ;
|
||||
#572 = VERTEX_POINT ( 'NONE', #179 ) ;
|
||||
#573 = AXIS2_PLACEMENT_3D ( 'NONE', #379, #528, #395 ) ;
|
||||
#574 = ORIENTED_EDGE ( 'NONE', *, *, #106, .F. ) ;
|
||||
#575 = LINE ( 'NONE', #203, #45 ) ;
|
||||
#576 = VERTEX_POINT ( 'NONE', #12 ) ;
|
||||
#577 = SURFACE_STYLE_USAGE ( .BOTH. , #297 ) ;
|
||||
#578 = VECTOR ( 'NONE', #64, 1000.000000000000200 ) ;
|
||||
#579 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#580 = ORIENTED_EDGE ( 'NONE', *, *, #21, .T. ) ;
|
||||
#581 = ORIENTED_EDGE ( 'NONE', *, *, #495, .F. ) ;
|
||||
#582 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#583 = VERTEX_POINT ( 'NONE', #14 ) ;
|
||||
#584 = EDGE_LOOP ( 'NONE', ( #604, #620, #124, #337 ) ) ;
|
||||
#585 = CYLINDRICAL_SURFACE ( 'NONE', #425, 9.905999999999981000 ) ;
|
||||
#586 = CARTESIAN_POINT ( 'NONE', ( 2.753144136584728700, -27.40347719022137700, 84.58969650139484000 ) ) ;
|
||||
#587 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912061300, -0.9996539193528473100 ) ) ;
|
||||
#588 = FACE_OUTER_BOUND ( 'NONE', #273, .T. ) ;
|
||||
#589 = EDGE_CURVE ( 'NONE', #576, #583, #605, .T. ) ;
|
||||
#590 = ORIENTED_EDGE ( 'NONE', *, *, #335, .T. ) ;
|
||||
#591 = CARTESIAN_POINT ( 'NONE', ( 74.39398808521927700, -19.16599345022832800, 7.997508075154927500 ) ) ;
|
||||
#592 = AXIS2_PLACEMENT_3D ( 'NONE', #253, #255, #252 ) ;
|
||||
#593 = EDGE_LOOP ( 'NONE', ( #4, #44, #279, #617 ) ) ;
|
||||
#594 = CARTESIAN_POINT ( 'NONE', ( 74.32716911271515400, -16.62687249507210300, 7.997508075154927500 ) ) ;
|
||||
#595 = CARTESIAN_POINT ( 'NONE', ( 94.19230048332889300, -21.18586457839494500, 4.937199134466635700 ) ) ;
|
||||
#596 = EDGE_LOOP ( 'NONE', ( #453, #95, #108, #73 ) ) ;
|
||||
#597 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912061300, 0.9996539193528473100 ) ) ;
|
||||
#598 = VERTEX_POINT ( 'NONE', #174 ) ;
|
||||
#599 = EDGE_CURVE ( 'NONE', #127, #140, #24, .T. ) ;
|
||||
#600 = CARTESIAN_POINT ( 'NONE', ( 86.25693064577285400, -18.85381075126640100, 82.38707016398214500 ) ) ;
|
||||
#601 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912061300, -0.9996539193528473100 ) ) ;
|
||||
#602 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ;
|
||||
#603 = CARTESIAN_POINT ( 'NONE', ( 83.82900619002207100, -9.008274038340918100, 4.336808689942017700E-015 ) ) ;
|
||||
#604 = ORIENTED_EDGE ( 'NONE', *, *, #671, .T. ) ;
|
||||
#605 = CIRCLE ( 'NONE', #36, 2.539999999999995600 ) ;
|
||||
#606 = CARTESIAN_POINT ( 'NONE', ( 68.14863413239649500, -25.68254324296319200, 5.625434551258997800 ) ) ;
|
||||
#607 = ORIENTED_EDGE ( 'NONE', *, *, #335, .F. ) ;
|
||||
#608 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ;
|
||||
#609 = EDGE_LOOP ( 'NONE', ( #100, #507 ) ) ;
|
||||
#610 = ORIENTED_EDGE ( 'NONE', *, *, #358, .F. ) ;
|
||||
#611 = AXIS2_PLACEMENT_3D ( 'NONE', #591, #281, #659 ) ;
|
||||
#612 = STYLED_ITEM ( 'NONE', ( #27 ), #62 ) ;
|
||||
#613 = ORIENTED_EDGE ( 'NONE', *, *, #495, .T. ) ;
|
||||
#614 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #173, 'design' ) ;
|
||||
#615 = LINE ( 'NONE', #313, #280 ) ;
|
||||
#616 = VERTEX_POINT ( 'NONE', #172 ) ;
|
||||
#617 = ORIENTED_EDGE ( 'NONE', *, *, #183, .F. ) ;
|
||||
#618 = LINE ( 'NONE', #244, #82 ) ;
|
||||
#619 = CYLINDRICAL_SURFACE ( 'NONE', #455, 2.539999999999995600 ) ;
|
||||
#620 = ORIENTED_EDGE ( 'NONE', *, *, #340, .F. ) ;
|
||||
#621 = VECTOR ( 'NONE', #668, 1000.000000000000100 ) ;
|
||||
#622 = FACE_OUTER_BOUND ( 'NONE', #38, .T. ) ;
|
||||
#623 = CYLINDRICAL_SURFACE ( 'NONE', #90, 9.905999999999981000 ) ;
|
||||
#624 = VECTOR ( 'NONE', #452, 1000.000000000000200 ) ;
|
||||
#625 = EDGE_CURVE ( 'NONE', #647, #105, #65, .T. ) ;
|
||||
#626 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ;
|
||||
#627 = ORIENTED_EDGE ( 'NONE', *, *, #229, .F. ) ;
|
||||
#628 = ORIENTED_EDGE ( 'NONE', *, *, #530, .T. ) ;
|
||||
#629 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
|
||||
#630 = FACE_OUTER_BOUND ( 'NONE', #675, .T. ) ;
|
||||
#631 = CARTESIAN_POINT ( 'NONE', ( 84.22633687414658300, -18.90724742946708400, 5.197793127232665200 ) ) ;
|
||||
#632 = COLOUR_RGB ( '',0.8666666666666667000, 0.9098039215686274400, 1.000000000000000000 ) ;
|
||||
#633 = VERTEX_POINT ( 'NONE', #160 ) ;
|
||||
#634 = VECTOR ( 'NONE', #163, 1000.000000000000100 ) ;
|
||||
#635 = LINE ( 'NONE', #231, #440 ) ;
|
||||
#636 = AXIS2_PLACEMENT_3D ( 'NONE', #314, #301, #293 ) ;
|
||||
#637 = PLANE ( 'NONE', #123 ) ;
|
||||
#638 = DIRECTION ( 'NONE', ( -0.02630668208823436600, 0.9996539193528472000, 3.414809992080334900E-016 ) ) ;
|
||||
#639 = LINE ( 'NONE', #498, #449 ) ;
|
||||
#640 = EDGE_LOOP ( 'NONE', ( #354, #29, #479, #32 ) ) ;
|
||||
#641 = EDGE_CURVE ( 'NONE', #647, #290, #541, .T. ) ;
|
||||
#642 = CARTESIAN_POINT ( 'NONE', ( 100.6381344784172300, -24.82755639175213600, 4.770151703206387600 ) ) ;
|
||||
#643 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ;
|
||||
#644 = FACE_OUTER_BOUND ( 'NONE', #564, .T. ) ;
|
||||
#645 = ORIENTED_EDGE ( 'NONE', *, *, #363, .F. ) ;
|
||||
#646 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
|
||||
#647 = VERTEX_POINT ( 'NONE', #149 ) ;
|
||||
#648 = VERTEX_POINT ( 'NONE', #114 ) ;
|
||||
#649 = CARTESIAN_POINT ( 'NONE', ( 74.39398808521927700, -19.16599345022832800, 7.997508075154927500 ) ) ;
|
||||
#650 = EDGE_LOOP ( 'NONE', ( #113, #643 ) ) ;
|
||||
#651 = AXIS2_PLACEMENT_3D ( 'NONE', #649, #403, #394 ) ;
|
||||
#652 = FACE_BOUND ( 'NONE', #131, .T. ) ;
|
||||
#653 = ORIENTED_EDGE ( 'NONE', *, *, #589, .T. ) ;
|
||||
#654 = CIRCLE ( 'NONE', #338, 2.539999999999995600 ) ;
|
||||
#655 = ORIENTED_EDGE ( 'NONE', *, *, #363, .T. ) ;
|
||||
#656 = DIRECTION ( 'NONE', ( -0.02630668208823238800, 0.9996539193528472000, 1.209969624493823200E-016 ) ) ;
|
||||
#657 = FILL_AREA_STYLE ('',( #357 ) ) ;
|
||||
#658 = ORIENTED_EDGE ( 'NONE', *, *, #625, .F. ) ;
|
||||
#659 = DIRECTION ( 'NONE', ( 0.02630668208823237800, -0.9996539193528470900, -1.206050777741824600E-016 ) ) ;
|
||||
#660 = CARTESIAN_POINT ( 'NONE', ( 86.25693064577285400, -18.85381075126640100, 82.38707016398214500 ) ) ;
|
||||
#661 = FACE_BOUND ( 'NONE', #524, .T. ) ;
|
||||
#662 = FACE_OUTER_BOUND ( 'NONE', #336, .T. ) ;
|
||||
#663 = AXIS2_PLACEMENT_3D ( 'NONE', #341, #587, #579 ) ;
|
||||
#664 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ;
|
||||
#665 = AXIS2_PLACEMENT_3D ( 'NONE', #387, #348, #412 ) ;
|
||||
#666 = ORIENTED_EDGE ( 'NONE', *, *, #538, .T. ) ;
|
||||
#667 = AXIS2_PLACEMENT_3D ( 'NONE', #365, #356, #360 ) ;
|
||||
#668 = DIRECTION ( 'NONE', ( 0.9993079584775086400, 0.02629757785467084400, -0.02630668208823237800 ) ) ;
|
||||
#669 = PLANE ( 'NONE', #344 ) ;
|
||||
#670 = FACE_OUTER_BOUND ( 'NONE', #559, .T. ) ;
|
||||
#671 = EDGE_CURVE ( 'NONE', #324, #648, #17, .T. ) ;
|
||||
#672 = EDGE_LOOP ( 'NONE', ( #450, #513, #610, #574, #59, #35 ) ) ;
|
||||
#673 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #148, 'distance_accuracy_value', 'NONE');
|
||||
#674 = ORIENTED_EDGE ( 'NONE', *, *, #530, .F. ) ;
|
||||
#675 = EDGE_LOOP ( 'NONE', ( #308, #18, #50, #374 ) ) ;
|
||||
#676 = DIRECTION ( 'NONE', ( 0.02629757785467085700, 0.0006920415224912059100, 0.9996539193528470900 ) ) ;
|
||||
#677 = AXIS2_PLACEMENT_3D ( 'NONE', #485, #460, #461 ) ;
|
||||
#678 = DIRECTION ( 'NONE', ( -0.02629757785467085700, -0.0006920415224912059100, -0.9996539193528470900 ) ) ;
|
||||
#679 = DIRECTION ( 'NONE', ( -0.02629757785467085400, -0.0006920415224912060200, -0.9996539193528472000 ) ) ;
|
||||
#680 = ORIENTED_EDGE ( 'NONE', *, *, #151, .T. ) ;
|
||||
#681 = ORIENTED_EDGE ( 'NONE', *, *, #165, .T. ) ;
|
||||
#682 = DIRECTION ( 'NONE', ( -0.02630668208823237800, 0.9996539193528470900, 1.206050777741824600E-016 ) ) ;
|
||||
#683 = VECTOR ( 'NONE', #69, 1000.000000000000100 ) ;
|
||||
ENDSEC;
|
||||
END-ISO-10303-21;
|
||||
File diff suppressed because it is too large
Load Diff
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
|
|
@ -31,7 +31,6 @@ This pack is a collection of the newest FOSSCAD CAD files including all previous
|
|||
* Firearms/Parlor_Pistol-Caboose/
|
||||
* Firearms/PM422_Songbird_22lr_Pistol_v2.1-JamesRPatrick/
|
||||
* Firearms/PM522_Washbear_Revolver_v2.0-JamesRPatrick/
|
||||
* Firearms/The_Holdout_v3.0-RollaTroll/
|
||||
* Misc/AR-15_Pistol_Cheek_Rest-unnamed/
|
||||
* Misc/FOSSCAD_AFG_GRIP-Warfairy/
|
||||
* Misc/FOSSCAD_RVG_Vertical_Grip-WarFairy/
|
||||
|
|
|
|||
Loading…
Reference in New Issue