Adding 9mm Gluty AR-15 Pistol by unnamed.

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/README.md

@@ -0,0 +1,114 @@
+# Gluty AR-15 9mm Pistol
+
+#### Author
+Unnamed 
+
+#### Version
+1.0
+  
+#### Description
+
+Here we have the Gluty AR-15 9mm Pistol and it works. It accepts a Glock generation 3 or 4 magazine. This design is an improvement on the FOSSCAD Shuty AR-15 9mm Pistol version 4.0 MP-1. The Gluty uses all the same parts as the Shuty v4.0 MP-1 except for the lower receiver and magazine release.
+
+#### Non-Printed Parts List
+The following is a list of non-printed parts used in this design. I sourced the springs from ACE Hardware.
+
+* Magazine - Magpul gl-17
+* Barrel - Lonewolf glock 17 replacement barrel or glock 17 barrel
+* 43.9mm steel dowel length-50.5mm (1018 or A32 1.75in bar  stock)
+* 1/4" steel dowel rod  1-180mm  2-154mm
+* Spring 11/16" x .072 length-175mm (main spring)
+* spring 15/32" x .041 length-65mm (buffer)
+* spring 1/4" x .026   length-9.3mm (firing pin spring)         
+* spring 5/16" x .024  length-26mm (gluty lower mag lock)
+* sheet metal screw #8x13mm phillips (Ejector pivot)
+* sheet metal screw #8x10mm phillips (gluty mag lock pivot)
+* sheet metal screw #8x13mm phillips (mag adapter set screw)
+* sheet metal screw #8x12.6mm phillips x2 (sight rail)
+* sheet metal screw #6x1" phillips x2 (endcap screws)
+* sheet metal screw #6x1.5" hex x4 (barrel retainer)
+* sheet metal screw #6x8.3mm phillips (mag lock set screw)
+* sheet metal screw #6x1" phillips (feed ramp screw)
+
+#### Printing Instructions
+
+All parts were printed and tested with Atomic PLA filament except for the ejector which was printed with Atomic Super Impact PLA. You can use ABS but i cannot guarantee a proper fit and parts could possibly fail due to bad layer bonding if done incorrectly; be advised. 
+
+* Gluty Lower - print vertical with buffer tower on the build plate.
+* Bolt housing - Print vertical with hammer end on the build plate.
+* MP-1 Upper - Print vertical with barrel end on the build plate.
+
+All other parts should be self explanitory. 
+
+##### Machine settings PLA
+* Bed 50
+* Nozzle .4 temp 220
+* extrusion width .45
+* cooling fan set to 40% starting on the second layer
+* layer height .15
+* filament diameter set to 1.71mm
+* Infill 100%
+
+#### Assembly Instructions
+
+##### Upper Receiver
+
+After you print the upper you need to drill out the four barrel retainer holes with a 7/64 drill bit to a depth of 23mm. When you attach the barrel adapter the machine screws will be difficult to insert. Take your time and you will have to back the screws out every so often as if it were a tap. Also the two endcap holes at the rear of the upper need to be drilled out with a 7/64 drill bit. 
+
+Insert the two 154mm 1/4" dowels into the upper, these reduce bolt friction and also reinforce the upper. They should go in fairly easy and apply oil to them before inserting. You will notice two small pilot holes close together on the ejector side of the upper, these are for the ejector pivot drill them uot with a 1/8 bit. You will only be using one of the two holes, I use the rear most hole but you may want to experiment. Be careful when installing the ejector pivot screw, screw it in a little at a time and back it out each time so that it does not crack the upper. Drill out the front takedown pin hole with a 1/4" drill bit.
+
+Insert the barrel into the upper using a 12-16" wood 2x4 block. you will have to pound it in slowly being careful to make sure its not too tight and possibly crack the upper. My barrel goes in fairly easy but some printers may print the hole too small and filing will be required. When the barrel is fully inserted it should protrude slightly into the upper so that the face of the bolt bumps the barrel before it bumps the plastic upper. Once the barrel is installed slide the barrel retainer over the barrel and insert the screws, make sure the retainer seats completely against the upper. If there is a gap the barrel needs to be driven in a little more.
+
+##### Bolt and Housing
+
+The housing should fit into the upper without any sanding but you will want to sand the flat sides of the bolt housing and the two bottom rails so that they are smooth.
+
+Start with a 43.9mm steel dowel approximately 55mm long. You can cut the final length later. Use the printed jig to mark the bolt for the cut out. Using a hand held grinder with a thin cutting disc, cut the notch out of the bolt. Once the notch is cut insert the bolt into the housing mark and cut it to the correct length. 
+
+Wedge the bolt into the housing so that it can't move inside the housing. Wedge it with a tooth pick between the top of the bolt and housing. do not wedge it at the bottom or sides because you want the bottom of the bolt to be resting on the housing when marking the firing pin hole and spring guide hole. 
+
+Mark the firing pin hole using the firing pin hole in the rear of the housing. 
+
+Insert the bolt and housing into the upper being careful not to let the bolt move inside the housing. Once the bolt bumps the barrel use a large diameter pencil to slide into the barrel to mark the firing pin exit hole. Also mark the spring guide hole at the rear of the housing. 
+
+Using a drill press drill the firing pin hole from each of the ends meeting in the middle use a 9/64 drill bit. Drill the spring guide hole with a 5/16 drill bit. Counter sink the rear of the spring guide hole with a 1/2 drill bit to a depth of 12mm. Once the bolt is drilled, drill out the firing pin hole in the housing with a 1/4" drill bit. Clean off any burrs on the inside so that the bolt can completely bump the rear of the housing. Finish drilling out the spring guide hole in the housing with a 1/2" drill bit. Clean off the burrs on the inside. 
+
+Make sure that the firing pin slides smoothly in the bolt and housing before using epoxy. Apply two part epoxy to the bolt and inside of housing, do not apply epoxy to the lower most portion of the bolt housing the epoxy will get pushed into the firing pin hole. Make sure the bolt is centered in the housing before the epoxy sets. 
+
+Once the epoxy sets insert the firing pin and spring and use a 7/64 drill bit 27mm long as the retaining pin. Use the smooth part of the bit. Insert the bolt into the upper and mark the hole for the charging handle. Mark the hole as far forward a possible but leave at least 3/16" so that the handle does not bottom out before the bolt closes. 
+
+Drill and tap the hole for 8-32 all thread the plastic knob onto the all thread. 
+
+Insert the bolt into the upper and screw the handle into the bolt. 
+
+Use a good gun oil on the bolt housing and interior of the upper. Make sure you oil the bottom of the bolt housing. 
+
+Insert the 180mm 1/4" dowel into the bolt and upper and then insert the main spring. If you cant find a spring long enough it is ok to use two pieces, just make sure that the factory ends face each other. 
+
+Install the end cap using the listed screws and the upper is complete. 
+
+Attach the upper to the Gluty lower using a 1/4" steel dowel 44mm long (front take down pin) and a 6-32 machine screw for the rear pin. The screw will thread into the upper and lower. 
+
+Insert the buffer spring into the buffer bolt, Make sure that the spring can compress freely into the bolt. You may have to ream the hole some. If the spring is a little loose then wrap some tape around the bottom end so that it stays in. Make sure that the factory end of the spring faces the bolt. 
+
+Thread the buffer bolt into the buffer tower. Done!
+
+
+
+##### Lower Receiver
+
+As with all printed AR lowers you will have to drill out all of the holes for the FCG, safety selector and safety selector locking pin. You will also have to tap the lower for the grip bolt. 
+
+In order for the lower to function correctly you will have to cut off one of the hammer spring legs(cut off 18.5mm). 
+
+Drill the front take down pin holes with a 1/4" drill bit.
+
+Install the mag lock arm and pivot, make sure it works smooth and use the pivot screw hole as a template to drill a 1/8" hole into the mag well. Make sure the screw does not protrude into the mag well. 
+
+Install the mag release shaft with the mapointed side facing the mag lock arm and also install the spring before screwing the arm and pivot into place. Install the feed ramp into the lower at the top of the mag well. 
+
+
+
+#### Author Notes
+
+Disclaimer: Use these files and instructions at your own risk. These files are for educational use only.

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/Mag_Release_Left_V0.1A.step

@@ -0,0 +1,177 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Mag_Release_LeftV0.1A.step',
+    '2016-02-05T23:14:30',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2015',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CYLINDRICAL_SURFACE ( 'NONE', #51, 3.899999999999999900 ) ;
+#2 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #142 ), #10 ) ;
+#3 = MANIFOLD_SOLID_BREP ( 'Chamfer1', #112 ) ;
+#4 = EDGE_LOOP ( 'NONE', ( #153 ) ) ;
+#5 = EDGE_LOOP ( 'NONE', ( #85 ) ) ;
+#6 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #145 ), #15 ) ;
+#7 = COLOUR_RGB ( '',0.7529411764705882200, 0.7529411764705882200, 0.7529411764705882200 ) ;
+#8 = EDGE_LOOP ( 'NONE', ( #68 ) ) ;
+#9 = CARTESIAN_POINT ( 'NONE',  ( -19.00000000000000000, 0.0000000000000000000, 2.899999999999999900 ) ) ;
+#10 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #134 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #146, #65, #151 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#11 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#12 = CARTESIAN_POINT ( 'NONE',  ( 20.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#13 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#14 = FACE_BOUND ( 'NONE', #5, .T. ) ;
+#15 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #50 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #157, #83, #11 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#16 = AXIS2_PLACEMENT_3D ( 'NONE', #12, #13, #160 ) ;
+#17 = ADVANCED_FACE ( 'NONE', ( #46, #14 ), #52, .T. ) ;
+#18 = CARTESIAN_POINT ( 'NONE',  ( 20.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#19 = CARTESIAN_POINT ( 'NONE',  ( 20.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#20 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#21 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#22 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#23 = FACE_OUTER_BOUND ( 'NONE', #30, .T. ) ;
+#24 = SURFACE_STYLE_FILL_AREA ( #34 ) ;
+#25 = CIRCLE ( 'NONE', #96, 2.899999999999999900 ) ;
+#26 = ADVANCED_FACE ( 'NONE', ( #103, #74 ), #59, .T. ) ;
+#27 = PRESENTATION_STYLE_ASSIGNMENT (( #111 ) ) ;
+#28 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#29 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#30 = EDGE_LOOP ( 'NONE', ( #99 ) ) ;
+#31 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#32 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#33 = AXIS2_PLACEMENT_3D ( 'NONE', #19, #100, #29 ) ;
+#34 = FILL_AREA_STYLE ('',( #47 ) ) ;
+#35 = PRODUCT_CONTEXT ( 'NONE', #132, 'mechanical' ) ;
+#36 = COLOUR_RGB ( '',0.7529411764705882200, 0.7529411764705882200, 0.7529411764705882200 ) ;
+#37 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ;
+#38 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #49 ) ;
+#39 = AXIS2_PLACEMENT_3D ( 'NONE', #130, #22, #107 ) ;
+#40 = ADVANCED_FACE ( 'NONE', ( #41, #137 ), #1, .T. ) ;
+#41 = FACE_OUTER_BOUND ( 'NONE', #8, .T. ) ;
+#42 = AXIS2_PLACEMENT_3D ( 'NONE', #89, #87, #78 ) ;
+#43 = EDGE_LOOP ( 'NONE', ( #123 ) ) ;
+#44 = PLANE ( 'NONE',  #60 ) ;
+#45 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#46 = FACE_OUTER_BOUND ( 'NONE', #108, .T. ) ;
+#47 = FILL_AREA_STYLE_COLOUR ( '', #36 ) ;
+#48 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #120 ) ;
+#49 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #53, #124 ) ;
+#50 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #157, 'distance_accuracy_value', 'NONE');
+#51 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #28, #90 ) ;
+#52 = CONICAL_SURFACE ( 'NONE', #16, 0.9000000000000045700, 0.7853981633974458400 ) ;
+#53 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #77, .NOT_KNOWN. ) ;
+#54 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#55 = CIRCLE ( 'NONE', #67, 3.899999999999999900 ) ;
+#56 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#57 = EDGE_LOOP ( 'NONE', ( #121 ) ) ;
+#58 = CARTESIAN_POINT ( 'NONE',  ( 20.00000000000000000, 0.0000000000000000000, -0.9000000000000045700 ) ) ;
+#59 = CYLINDRICAL_SURFACE ( 'NONE', #42, 2.899999999999999900 ) ;
+#60 = AXIS2_PLACEMENT_3D ( 'NONE', #80, #54, #138 ) ;
+#61 = FILL_AREA_STYLE ('',( #155 ) ) ;
+#62 = VERTEX_POINT ( 'NONE', #143 ) ;
+#63 = EDGE_LOOP ( 'NONE', ( #37 ) ) ;
+#64 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #77 ) ) ;
+#65 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#66 = ADVANCED_FACE ( 'NONE', ( #135 ), #44, .T. ) ;
+#67 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #56, #139 ) ;
+#68 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ;
+#69 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#70 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#71 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -2.899999999999999900 ) ) ;
+#72 = SURFACE_STYLE_USAGE ( .BOTH. , #144 ) ;
+#73 = ORIENTED_EDGE ( 'NONE', *, *, #136, .T. ) ;
+#74 = FACE_OUTER_BOUND ( 'NONE', #79, .T. ) ;
+#75 = PRESENTATION_STYLE_ASSIGNMENT (( #72 ) ) ;
+#76 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Mag_Release_LeftV0.1A', ( #3, #39 ), #122 ) ;
+#77 = PRODUCT ( 'Mag_Release_LeftV0.1A', 'Mag_Release_LeftV0.1A', '', ( #35 ) ) ;
+#78 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#79 = EDGE_LOOP ( 'NONE', ( #73 ) ) ;
+#80 = CARTESIAN_POINT ( 'NONE',  ( 20.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#81 = CARTESIAN_POINT ( 'NONE',  ( -19.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#82 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #116, #45 ) ;
+#83 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#84 = EDGE_LOOP ( 'NONE', ( #128 ) ) ;
+#85 = ORIENTED_EDGE ( 'NONE', *, *, #97, .F. ) ;
+#86 = SHAPE_DEFINITION_REPRESENTATION ( #38, #76 ) ;
+#87 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#88 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #69, #152 ) ;
+#89 = CARTESIAN_POINT ( 'NONE',  ( -19.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#90 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#91 = VERTEX_POINT ( 'NONE', #131 ) ;
+#92 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#93 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#94 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#95 = VERTEX_POINT ( 'NONE', #71 ) ;
+#96 = AXIS2_PLACEMENT_3D ( 'NONE', #141, #70, #154 ) ;
+#97 = EDGE_CURVE ( 'NONE', #159, #159, #156, .T. ) ;
+#98 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #94, 'distance_accuracy_value', 'NONE');
+#99 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ;
+#100 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#101 = PLANE ( 'NONE',  #133 ) ;
+#102 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#103 = FACE_OUTER_BOUND ( 'NONE', #63, .T. ) ;
+#104 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#105 = SURFACE_SIDE_STYLE ('',( #24 ) ) ;
+#106 = AXIS2_PLACEMENT_3D ( 'NONE', #93, #20, #102 ) ;
+#107 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#108 = EDGE_LOOP ( 'NONE', ( #113 ) ) ;
+#109 = SURFACE_STYLE_FILL_AREA ( #61 ) ;
+#110 = EDGE_CURVE ( 'NONE', #91, #91, #55, .T. ) ;
+#111 = SURFACE_STYLE_USAGE ( .BOTH. , #105 ) ;
+#112 = CLOSED_SHELL ( 'NONE', ( #40, #66, #114, #26, #149, #17 ) ) ;
+#113 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ;
+#114 = ADVANCED_FACE ( 'NONE', ( #140, #23 ), #127, .F. ) ;
+#115 = CIRCLE ( 'NONE', #82, 3.899999999999999900 ) ;
+#116 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#117 = EDGE_CURVE ( 'NONE', #62, #62, #115, .T. ) ;
+#118 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#119 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #132 ) ;
+#120 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#121 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ;
+#122 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #98 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #94, #21, #104 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#123 = ORIENTED_EDGE ( 'NONE', *, *, #97, .T. ) ;
+#124 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #120, 'design' ) ;
+#125 = EDGE_CURVE ( 'NONE', #126, #126, #25, .T. ) ;
+#126 = VERTEX_POINT ( 'NONE', #9 ) ;
+#127 = PLANE ( 'NONE',  #88 ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ;
+#129 = CARTESIAN_POINT ( 'NONE',  ( 16.99999999999998900, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#130 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 16.99999999999998900, 0.0000000000000000000, -3.899999999999999900 ) ) ;
+#132 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#133 = AXIS2_PLACEMENT_3D ( 'NONE', #81, #32, #118 ) ;
+#134 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #146, 'distance_accuracy_value', 'NONE');
+#135 = FACE_OUTER_BOUND ( 'NONE', #43, .T. ) ;
+#136 = EDGE_CURVE ( 'NONE', #95, #95, #147, .T. ) ;
+#137 = FACE_OUTER_BOUND ( 'NONE', #57, .T. ) ;
+#138 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#139 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#140 = FACE_BOUND ( 'NONE', #4, .T. ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( -19.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#142 = STYLED_ITEM ( 'NONE', ( #27 ), #3 ) ;
+#143 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.899999999999999900 ) ) ;
+#144 = SURFACE_SIDE_STYLE ('',( #109 ) ) ;
+#145 = STYLED_ITEM ( 'NONE', ( #75 ), #76 ) ;
+#146 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#147 = CIRCLE ( 'NONE', #106, 2.899999999999999900 ) ;
+#148 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #142 ) ) ;
+#149 = ADVANCED_FACE ( 'NONE', ( #150 ), #101, .T. ) ;
+#150 = FACE_OUTER_BOUND ( 'NONE', #84, .T. ) ;
+#151 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#152 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#153 = ORIENTED_EDGE ( 'NONE', *, *, #136, .F. ) ;
+#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#155 = FILL_AREA_STYLE_COLOUR ( '', #7 ) ;
+#156 = CIRCLE ( 'NONE', #33, 0.9000000000000045700 ) ;
+#157 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#158 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #145 ) ) ;
+#159 = VERTEX_POINT ( 'NONE', #58 ) ;
+#160 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/Mag_Release_Pivot_Pin_V0.1A.step

@@ -0,0 +1,117 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Mag_Release_Pivot_PinV0.1A.STEP',
+    '2016-02-05T23:32:27',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2015',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#2 = SURFACE_STYLE_USAGE ( .BOTH. , #52 ) ;
+#3 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 16.00000000000000000 ) ) ;
+#4 = FILL_AREA_STYLE ('',( #37 ) ) ;
+#5 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#6 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #11 ), #77 ) ;
+#7 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #38, 'design' ) ;
+#8 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#9 = EDGE_LOOP ( 'NONE', ( #33 ) ) ;
+#10 = EDGE_CURVE ( 'NONE', #99, #99, #73, .T. ) ;
+#11 = STYLED_ITEM ( 'NONE', ( #89 ), #13 ) ;
+#12 = PRODUCT_CONTEXT ( 'NONE', #5, 'mechanical' ) ;
+#13 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Mag_Release_Pivot_PinV0.1A', ( #91, #63 ), #16 ) ;
+#14 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #51, .T. ) ;
+#16 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #74 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #27, #72, #54 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#17 = PLANE ( 'NONE',  #100 ) ;
+#18 = CARTESIAN_POINT ( 'NONE',  ( 2.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#19 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #22 ) ) ;
+#20 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #11 ) ) ;
+#21 = ORIENTED_EDGE ( 'NONE', *, *, #51, .F. ) ;
+#22 = STYLED_ITEM ( 'NONE', ( #45 ), #91 ) ;
+#23 = PLANE ( 'NONE',  #66 ) ;
+#24 = CYLINDRICAL_SURFACE ( 'NONE', #78, 2.000000000000000000 ) ;
+#25 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#26 = COLOUR_RGB ( '',0.7529411764705882200, 0.7529411764705882200, 0.7529411764705882200 ) ;
+#27 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#28 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#29 = CIRCLE ( 'NONE', #88, 2.000000000000000000 ) ;
+#30 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#31 = EDGE_LOOP ( 'NONE', ( #21 ) ) ;
+#32 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #22 ), #68 ) ;
+#33 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ;
+#34 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #57, .NOT_KNOWN. ) ;
+#35 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#36 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#37 = FILL_AREA_STYLE_COLOUR ( '', #97 ) ;
+#38 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#39 = VERTEX_POINT ( 'NONE', #47 ) ;
+#40 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#41 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #57 ) ) ;
+#42 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ;
+#43 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#44 = SURFACE_SIDE_STYLE ('',( #71 ) ) ;
+#45 = PRESENTATION_STYLE_ASSIGNMENT (( #86 ) ) ;
+#46 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 16.00000000000000000 ) ) ;
+#47 = CARTESIAN_POINT ( 'NONE',  ( 2.000000000000000000, 0.0000000000000000000, 16.00000000000000000 ) ) ;
+#48 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #34, #7 ) ;
+#49 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#50 = FACE_OUTER_BOUND ( 'NONE', #81, .T. ) ;
+#51 = EDGE_CURVE ( 'NONE', #39, #39, #29, .T. ) ;
+#52 = SURFACE_SIDE_STYLE ('',( #67 ) ) ;
+#53 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 16.00000000000000000 ) ) ;
+#54 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#55 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #48 ) ;
+#56 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #30, 'distance_accuracy_value', 'NONE');
+#57 = PRODUCT ( 'Mag_Release_Pivot_PinV0.1A', 'Mag_Release_Pivot_PinV0.1A', '', ( #12 ) ) ;
+#58 = SHAPE_DEFINITION_REPRESENTATION ( #55, #13 ) ;
+#59 = ADVANCED_FACE ( 'NONE', ( #61, #50 ), #24, .T. ) ;
+#60 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#61 = FACE_OUTER_BOUND ( 'NONE', #31, .T. ) ;
+#62 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #38 ) ;
+#63 = AXIS2_PLACEMENT_3D ( 'NONE', #65, #35, #25 ) ;
+#64 = ADVANCED_FACE ( 'NONE', ( #98 ), #17, .T. ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#66 = AXIS2_PLACEMENT_3D ( 'NONE', #1, #8, #79 ) ;
+#67 = SURFACE_STYLE_FILL_AREA ( #93 ) ;
+#68 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #56 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #30, #87, #36 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#69 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #5 ) ;
+#70 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#71 = SURFACE_STYLE_FILL_AREA ( #4 ) ;
+#72 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#73 = CIRCLE ( 'NONE', #80, 2.000000000000000000 ) ;
+#74 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #27, 'distance_accuracy_value', 'NONE');
+#75 = FACE_OUTER_BOUND ( 'NONE', #9, .T. ) ;
+#76 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#77 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #94 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #60, #43, #82 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#78 = AXIS2_PLACEMENT_3D ( 'NONE', #3, #14, #28 ) ;
+#79 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#80 = AXIS2_PLACEMENT_3D ( 'NONE', #92, #85, #83 ) ;
+#81 = EDGE_LOOP ( 'NONE', ( #42 ) ) ;
+#82 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#83 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#84 = FILL_AREA_STYLE_COLOUR ( '', #26 ) ;
+#85 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#86 = SURFACE_STYLE_USAGE ( .BOTH. , #44 ) ;
+#87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#88 = AXIS2_PLACEMENT_3D ( 'NONE', #46, #70, #76 ) ;
+#89 = PRESENTATION_STYLE_ASSIGNMENT (( #2 ) ) ;
+#90 = ADVANCED_FACE ( 'NONE', ( #75 ), #23, .F. ) ;
+#91 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #95 ) ;
+#92 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#93 = FILL_AREA_STYLE ('',( #84 ) ) ;
+#94 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #60, 'distance_accuracy_value', 'NONE');
+#95 = CLOSED_SHELL ( 'NONE', ( #59, #64, #90 ) ) ;
+#96 = EDGE_LOOP ( 'NONE', ( #15 ) ) ;
+#97 = COLOUR_RGB ( '',0.7529411764705882200, 0.7529411764705882200, 0.7529411764705882200 ) ;
+#98 = FACE_OUTER_BOUND ( 'NONE', #96, .T. ) ;
+#99 = VERTEX_POINT ( 'NONE', #18 ) ;
+#100 = AXIS2_PLACEMENT_3D ( 'NONE', #53, #40, #49 ) ;
+ENDSEC;
+END-ISO-10303-21;

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/Mag_Release_Right_V0.2A.step

@@ -0,0 +1,973 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('Mag_Release_Right_V0.2A.STEP',
+    '2016-02-15T23:16:34',
+    ( 'WarFairy' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2015',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = AXIS2_PLACEMENT_3D ( 'NONE', #706, #793, #897 ) ;
+#2 = CARTESIAN_POINT ( 'NONE',  ( -5.251134893175192900, -0.7197206791508584700, -58.21881647564817500 ) ) ;
+#3 = FILL_AREA_STYLE_COLOUR ( '', #556 ) ;
+#4 = CARTESIAN_POINT ( 'NONE',  ( 3.499999999968313800, 6.148370774788309000, -41.24900233933922800 ) ) ;
+#5 = EDGE_CURVE ( 'NONE', #299, #215, #612, .T. ) ;
+#6 = ORIENTED_EDGE ( 'NONE', *, *, #358, .T. ) ;
+#7 = ORIENTED_EDGE ( 'NONE', *, *, #627, .T. ) ;
+#8 = PLANE ( 'NONE',  #352 ) ;
+#9 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#10 = ORIENTED_EDGE ( 'NONE', *, *, #553, .F. ) ;
+#11 = ORIENTED_EDGE ( 'NONE', *, *, #933, .T. ) ;
+#12 = VECTOR ( 'NONE', #255, 1000.000000000000000 ) ;
+#13 = EDGE_LOOP ( 'NONE', ( #923, #75, #452, #98, #631, #104, #584 ) ) ;
+#14 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #828, #899, #451, #192 ),
+ .UNSPECIFIED., .F., .T. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 1.570796417913987300, 1.584463678848737400 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9999844338921214400, 0.9999844338921214400, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#15 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ;
+#16 = EDGE_LOOP ( 'NONE', ( #53, #11, #140, #182 ) ) ;
+#17 = AXIS2_PLACEMENT_3D ( 'NONE', #657, #362, #535 ) ;
+#18 = VERTEX_POINT ( 'NONE', #918 ) ;
+#19 = DIRECTION ( 'NONE',  ( 2.975113051694695300E-013, -0.9550203024499738200, 0.2965404220479234700 ) ) ;
+#20 = LINE ( 'NONE', #388, #671 ) ;
+#21 = EDGE_CURVE ( 'NONE', #558, #906, #628, .T. ) ;
+#22 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.959362523977463200E-016 ) ) ;
+#23 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #168, #176 ) ;
+#24 = LINE ( 'NONE', #777, #64 ) ;
+#25 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.851629225211693900, 2.176793373776115600E-015 ) ) ;
+#26 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -8.165820698173490700, -53.36767462975518600 ) ) ;
+#27 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#28 = EDGE_CURVE ( 'NONE', #346, #263, #632, .T. ) ;
+#29 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#30 = VERTEX_POINT ( 'NONE', #673 ) ;
+#31 = ORIENTED_EDGE ( 'NONE', *, *, #163, .F. ) ;
+#32 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3520028473156921500, -57.03456647508515000 ) ) ;
+#33 = ORIENTED_EDGE ( 'NONE', *, *, #358, .F. ) ;
+#34 = SURFACE_SIDE_STYLE ('',( #462 ) ) ;
+#35 = VERTEX_POINT ( 'NONE', #235 ) ;
+#36 = ORIENTED_EDGE ( 'NONE', *, *, #890, .F. ) ;
+#37 = ORIENTED_EDGE ( 'NONE', *, *, #203, .F. ) ;
+#38 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#39 = ORIENTED_EDGE ( 'NONE', *, *, #713, .F. ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#41 = EDGE_CURVE ( 'NONE', #694, #772, #648, .T. ) ;
+#42 = AXIS2_PLACEMENT_3D ( 'NONE', #840, #839, #702 ) ;
+#43 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, 6.148370774788303600, -8.081775416243882400 ) ) ;
+#44 = DIRECTION ( 'NONE',  ( -0.1736481776669338300, 1.919267227213490400E-016, -0.9848077530122073500 ) ) ;
+#45 = VECTOR ( 'NONE', #607, 1000.000000000000000 ) ;
+#46 = AXIS2_PLACEMENT_3D ( 'NONE', #381, #866, #776 ) ;
+#47 = ORIENTED_EDGE ( 'NONE', *, *, #795, .F. ) ;
+#48 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -5.758911772744590400, -58.07676391684292100 ) ) ;
+#49 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #560, #95 ) ;
+#50 = CIRCLE ( 'NONE', #467, 4.000373622103994700 ) ;
+#51 = CIRCLE ( 'NONE', #93, 4.000000000000003600 ) ;
+#52 = CARTESIAN_POINT ( 'NONE',  ( 1.276783490580143800, -0.3520028473156938700, -53.36767462975518600 ) ) ;
+#53 = ORIENTED_EDGE ( 'NONE', *, *, #783, .F. ) ;
+#54 = VERTEX_POINT ( 'NONE', #65 ) ;
+#55 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#56 = CARTESIAN_POINT ( 'NONE',  ( 5.000002131514212200, -1.852002847315690400, -74.48309681854581800 ) ) ;
+#57 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#58 = EDGE_CURVE ( 'NONE', #299, #112, #744, .T. ) ;
+#59 = PLANE ( 'NONE',  #824 ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #886, .T. ) ;
+#61 = ORIENTED_EDGE ( 'NONE', *, *, #422, .T. ) ;
+#62 = VECTOR ( 'NONE', #900, 1000.000000000000000 ) ;
+#63 = EDGE_CURVE ( 'NONE', #94, #376, #645, .T. ) ;
+#64 = VECTOR ( 'NONE', #578, 1000.000000000000000 ) ;
+#65 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.852002847315691800, -65.05788579290296500 ) ) ;
+#66 = LINE ( 'NONE', #831, #81 ) ;
+#67 = EDGE_LOOP ( 'NONE', ( #401, #384 ) ) ;
+#68 = DIRECTION ( 'NONE',  ( 1.801313827457252100E-013, -0.9550203024499738200, 0.2965404220479235200 ) ) ;
+#69 = EDGE_LOOP ( 'NONE', ( #364, #79, #226, #165, #561, #251, #158 ) ) ;
+#70 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.148370774788309000, -37.67825353023624000 ) ) ;
+#71 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#72 = DIRECTION ( 'NONE',  ( -0.1736481776669344100, 0.0000000000000000000, 0.9848077530122072400 ) ) ;
+#73 = VERTEX_POINT ( 'NONE', #298 ) ;
+#74 = EDGE_CURVE ( 'NONE', #216, #254, #876, .T. ) ;
+#75 = ORIENTED_EDGE ( 'NONE', *, *, #219, .T. ) ;
+#76 = DIRECTION ( 'NONE',  ( 0.2124557596977350300, 1.799839444768448500E-016, 0.9771706863037072900 ) ) ;
+#77 = ORIENTED_EDGE ( 'NONE', *, *, #822, .F. ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, 0.0000000000000000000, -53.36767462975518600 ) ) ;
+#79 = ORIENTED_EDGE ( 'NONE', *, *, #581, .F. ) ;
+#80 = EDGE_LOOP ( 'NONE', ( #426, #429, #431 ) ) ;
+#81 = VECTOR ( 'NONE', #597, 1000.000000000000000 ) ;
+#82 = ORIENTED_EDGE ( 'NONE', *, *, #475, .F. ) ;
+#83 = DIRECTION ( 'NONE',  ( 0.5912864069156113000, -0.7701872442055245300, 0.2391484765996344200 ) ) ;
+#84 = ORIENTED_EDGE ( 'NONE', *, *, #615, .F. ) ;
+#85 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3520028473156919200, 0.0000000000000000000 ) ) ;
+#86 = CARTESIAN_POINT ( 'NONE',  ( 3.499999999968313800, -1.851629225211745000, -43.24900233930756600 ) ) ;
+#87 = EDGE_LOOP ( 'NONE', ( #319, #321, #270, #596 ) ) ;
+#88 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3520028473156919200, -62.78585320393066400 ) ) ;
+#89 = VERTEX_POINT ( 'NONE', #409 ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( 4.999996949955350300, 6.148370774788302700, -8.081758118581108300 ) ) ;
+#91 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.841888495014732400E-016, -1.000000000000000000 ) ) ;
+#92 = AXIS2_PLACEMENT_3D ( 'NONE', #663, #660, #670 ) ;
+#93 = AXIS2_PLACEMENT_3D ( 'NONE', #185, #295, #442 ) ;
+#94 = VERTEX_POINT ( 'NONE', #56 ) ;
+#95 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.192622389752934300E-015, -1.000000000000000000 ) ) ;
+#96 = EDGE_LOOP ( 'NONE', ( #260, #196, #150, #495 ) ) ;
+#97 = ORIENTED_EDGE ( 'NONE', *, *, #736, .F. ) ;
+#98 = ORIENTED_EDGE ( 'NONE', *, *, #795, .T. ) ;
+#99 = LINE ( 'NONE', #639, #236 ) ;
+#100 = EDGE_CURVE ( 'NONE', #18, #73, #259, .T. ) ;
+#101 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 1.959365083918120100E-016 ) ) ;
+#102 = EDGE_LOOP ( 'NONE', ( #365, #571, #178, #806 ) ) ;
+#103 = CARTESIAN_POINT ( 'NONE',  ( -9.966604947013848900, -1.560967573357714900, -60.92808578128637700 ) ) ;
+#104 = ORIENTED_EDGE ( 'NONE', *, *, #774, .F. ) ;
+#105 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#106 = EDGE_LOOP ( 'NONE', ( #911, #810, #676, #244, #867, #557 ) ) ;
+#107 = ORIENTED_EDGE ( 'NONE', *, *, #549, .F. ) ;
+#108 = CARTESIAN_POINT ( 'NONE',  ( 4.990361839561365400, 6.148370774788315200, -74.42842400605783800 ) ) ;
+#109 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, 2.148370774788300100, -8.081775416243882400 ) ) ;
+#110 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#111 = AXIS2_PLACEMENT_3D ( 'NONE', #681, #869, #658 ) ;
+#112 = VERTEX_POINT ( 'NONE', #756 ) ;
+#113 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #851 ) ;
+#114 = ORIENTED_EDGE ( 'NONE', *, *, #902, .T. ) ;
+#115 = EDGE_CURVE ( 'NONE', #152, #263, #674, .T. ) ;
+#116 = EDGE_LOOP ( 'NONE', ( #590, #547, #537, #533, #513, #36 ) ) ;
+#117 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #239 ) ) ;
+#118 = PLANE ( 'NONE',  #528 ) ;
+#119 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.9550203024500547600, 0.2965404220476631800 ) ) ;
+#120 = ORIENTED_EDGE ( 'NONE', *, *, #896, .F. ) ;
+#121 = AXIS2_PLACEMENT_3D ( 'NONE', #566, #305, #110 ) ;
+#122 = LINE ( 'NONE', #309, #145 ) ;
+#123 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.2965404220476632900, -0.9550203024500545400 ) ) ;
+#124 = AXIS2_PLACEMENT_3D ( 'NONE', #579, #700, #695 ) ;
+#125 = CARTESIAN_POINT ( 'NONE',  ( -15.78902719107936500, -0.7197206791526318300, -58.21881647564763500 ) ) ;
+#126 = VECTOR ( 'NONE', #762, 1000.000000000000000 ) ;
+#127 = LINE ( 'NONE', #662, #229 ) ;
+#128 = ORIENTED_EDGE ( 'NONE', *, *, #115, .T. ) ;
+#129 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#130 = VECTOR ( 'NONE', #585, 1000.000000000000000 ) ;
+#131 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #304, #449 ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3520028473156917000, -53.36767462975518600 ) ) ;
+#133 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.959362523977463200E-016, 1.000000000000000000 ) ) ;
+#134 = ORIENTED_EDGE ( 'NONE', *, *, #760, .F. ) ;
+#135 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#136 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#137 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947012179800, -6.032340773353615400, -60.64178392054327600 ) ) ;
+#138 = EDGE_CURVE ( 'NONE', #460, #89, #565, .T. ) ;
+#139 = VERTEX_POINT ( 'NONE', #852 ) ;
+#140 = ORIENTED_EDGE ( 'NONE', *, *, #274, .F. ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( -13.43342383045584200, 6.148370774788317000, -74.42842400605790900 ) ) ;
+#142 = ORIENTED_EDGE ( 'NONE', *, *, #916, .F. ) ;
+#143 = CARTESIAN_POINT ( 'NONE',  ( 3.499999999968313800, -1.851629225211742600, -41.24900233933922100 ) ) ;
+#144 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#145 = VECTOR ( 'NONE', #536, 1000.000000000000100 ) ;
+#146 = AXIS2_PLACEMENT_3D ( 'NONE', #721, #525, #880 ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( 1.276783490580142500, -38.29807794501345300, -53.36767462975518600 ) ) ;
+#148 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -1.851629225211754100, -51.09585114745916500 ) ) ;
+#149 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -1.852002847315690000, -74.48309681854583200 ) ) ;
+#150 = ORIENTED_EDGE ( 'NONE', *, *, #497, .T. ) ;
+#151 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#152 = VERTEX_POINT ( 'NONE', #70 ) ;
+#153 = EDGE_CURVE ( 'NONE', #374, #935, #640, .T. ) ;
+#154 = EDGE_LOOP ( 'NONE', ( #382 ) ) ;
+#155 = AXIS2_PLACEMENT_3D ( 'NONE', #649, #655, #570 ) ;
+#156 = LINE ( 'NONE', #775, #45 ) ;
+#157 = PRODUCT_CONTEXT ( 'NONE', #430, 'mechanical' ) ;
+#158 = ORIENTED_EDGE ( 'NONE', *, *, #736, .T. ) ;
+#159 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -1.851629225211693900, 2.176793373776115600E-015 ) ) ;
+#160 = EDGE_LOOP ( 'NONE', ( #616, #712, #905, #872, #7 ) ) ;
+#161 = CARTESIAN_POINT ( 'NONE',  ( -9.966604947011306900, -9.726391159307530300, -58.39266517277316400 ) ) ;
+#162 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -38.29807794501344600, -46.12667563204016100 ) ) ;
+#163 = EDGE_CURVE ( 'NONE', #803, #558, #936, .T. ) ;
+#164 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#165 = ORIENTED_EDGE ( 'NONE', *, *, #933, .F. ) ;
+#166 = ORIENTED_EDGE ( 'NONE', *, *, #497, .F. ) ;
+#167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#168 = DIRECTION ( 'NONE',  ( -2.975113051694419700E-013, 0.9550203024498852300, -0.2965404220482086900 ) ) ;
+#169 = LINE ( 'NONE', #614, #720 ) ;
+#170 = VERTEX_POINT ( 'NONE', #686 ) ;
+#171 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #617 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #307, #342, #532 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#172 = EDGE_LOOP ( 'NONE', ( #412, #310, #297, #120 ) ) ;
+#173 = AXIS2_PLACEMENT_3D ( 'NONE', #489, #543, #276 ) ;
+#174 = VERTEX_POINT ( 'NONE', #816 ) ;
+#175 = EDGE_CURVE ( 'NONE', #221, #222, #20, .T. ) ;
+#176 = DIRECTION ( 'NONE',  ( 9.227252531791528700E-014, -0.2965404220482087400, -0.9550203024498852300 ) ) ;
+#177 = EDGE_CURVE ( 'NONE', #606, #174, #653, .T. ) ;
+#178 = ORIENTED_EDGE ( 'NONE', *, *, #774, .T. ) ;
+#179 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -15.83191020520273000, -50.98730071305441000 ) ) ;
+#180 = VERTEX_POINT ( 'NONE', #698 ) ;
+#181 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947012554700, -5.720226402342059500, -59.63660709188933900 ) ) ;
+#182 = ORIENTED_EDGE ( 'NONE', *, *, #343, .F. ) ;
+#183 = ORIENTED_EDGE ( 'NONE', *, *, #284, .T. ) ;
+#184 = PLANE ( 'NONE',  #881 ) ;
+#185 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, 2.148370774788300100, -8.081775416243882400 ) ) ;
+#186 = VECTOR ( 'NONE', #57, 1000.000000000000000 ) ;
+#187 = EDGE_LOOP ( 'NONE', ( #82, #800, #898, #915 ) ) ;
+#188 = CARTESIAN_POINT ( 'NONE',  ( -5.607455118641818900, -5.883657126037604700, -61.73065123203761600 ) ) ;
+#189 = AXIS2_PLACEMENT_3D ( 'NONE', #486, #689, #683 ) ;
+#190 = LINE ( 'NONE', #583, #206 ) ;
+#191 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947011307700, -9.726391159306068300, -58.39266517277316400 ) ) ;
+#192 = CARTESIAN_POINT ( 'NONE',  ( 4.990361839561365400, 6.148370774788315200, -74.42842400605783800 ) ) ;
+#193 = LINE ( 'NONE', #550, #277 ) ;
+#194 = DIRECTION ( 'NONE',  ( 0.5912864069156113000, -0.7701872442055245300, 0.2391484765996343400 ) ) ;
+#195 = VERTEX_POINT ( 'NONE', #88 ) ;
+#196 = ORIENTED_EDGE ( 'NONE', *, *, #177, .T. ) ;
+#197 = DIRECTION ( 'NONE',  ( 3.454889293528785600E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#198 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#199 = CARTESIAN_POINT ( 'NONE',  ( 4.166869579715871900, -16.44759381507950000, -50.79612668559919100 ) ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ;
+#201 = ORIENTED_EDGE ( 'NONE', *, *, #549, .T. ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #402, .T. ) ;
+#203 = EDGE_CURVE ( 'NONE', #398, #346, #669, .T. ) ;
+#204 = AXIS2_PLACEMENT_3D ( 'NONE', #40, #370, #375 ) ;
+#205 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947013849600, -1.560967573356831600, -60.92808578128352800 ) ) ;
+#206 = VECTOR ( 'NONE', #197, 1000.000000000000000 ) ;
+#207 = CARTESIAN_POINT ( 'NONE',  ( -4.157721660493922200, -0.3520028473156917000, -56.34995141901344300 ) ) ;
+#208 = EDGE_LOOP ( 'NONE', ( #293, #618, #291, #287 ) ) ;
+#209 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.851629225211693900, 2.176793373776115600E-015 ) ) ;
+#210 = VERTEX_POINT ( 'NONE', #577 ) ;
+#211 = VERTEX_POINT ( 'NONE', #637 ) ;
+#212 = VERTEX_POINT ( 'NONE', #802 ) ;
+#213 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.851629225211748100, -37.67825353023624000 ) ) ;
+#214 = CLOSED_SHELL ( 'NONE', ( #433, #427, #387, #391, #517, #472, #437, #496, #479, #406, #424, #400, #450, #396, #505, #523, #526, #509, #501, #514, #413, #440, #419, #377, #389, #461, #445, #487, #492 ) ) ;
+#215 = VERTEX_POINT ( 'NONE', #613 ) ;
+#216 = VERTEX_POINT ( 'NONE', #652 ) ;
+#217 = PLANE ( 'NONE',  #860 ) ;
+#218 = ORIENTED_EDGE ( 'NONE', *, *, #63, .F. ) ;
+#219 = EDGE_CURVE ( 'NONE', #221, #481, #684, .T. ) ;
+#220 = LINE ( 'NONE', #892, #262 ) ;
+#221 = VERTEX_POINT ( 'NONE', #761 ) ;
+#222 = VERTEX_POINT ( 'NONE', #626 ) ;
+#223 = CARTESIAN_POINT ( 'NONE',  ( 4.336808689942017700E-016, 6.148370774788308100, -36.43814991900629300 ) ) ;
+#224 = ORIENTED_EDGE ( 'NONE', *, *, #327, .F. ) ;
+#225 = ORIENTED_EDGE ( 'NONE', *, *, #857, .T. ) ;
+#226 = ORIENTED_EDGE ( 'NONE', *, *, #594, .T. ) ;
+#227 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#228 = ORIENTED_EDGE ( 'NONE', *, *, #163, .T. ) ;
+#229 = VECTOR ( 'NONE', #809, 1000.000000000000000 ) ;
+#230 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#231 = AXIS2_PLACEMENT_3D ( 'NONE', #768, #855, #796 ) ;
+#232 = LINE ( 'NONE', #555, #186 ) ;
+#233 = PLANE ( 'NONE',  #856 ) ;
+#234 = AXIS2_PLACEMENT_3D ( 'NONE', #48, #55, #367 ) ;
+#235 = CARTESIAN_POINT ( 'NONE',  ( -5.251134893174421100, -4.899130213439850200, -56.92108085261508400 ) ) ;
+#236 = VECTOR ( 'NONE', #559, 1000.000000000000000 ) ;
+#237 = EDGE_CURVE ( 'NONE', #827, #564, #644, .T. ) ;
+#238 = VERTEX_POINT ( 'NONE', #213 ) ;
+#239 = STYLED_ITEM ( 'NONE', ( #601 ), #826 ) ;
+#240 = LINE ( 'NONE', #353, #779 ) ;
+#241 = ORIENTED_EDGE ( 'NONE', *, *, #605, .T. ) ;
+#242 = AXIS2_PLACEMENT_3D ( 'NONE', #507, #256, #464 ) ;
+#243 = CARTESIAN_POINT ( 'NONE',  ( 2.937462482337701400, -1.852002847315691800, -62.78585320393066400 ) ) ;
+#244 = ORIENTED_EDGE ( 'NONE', *, *, #699, .F. ) ;
+#245 = CARTESIAN_POINT ( 'NONE',  ( -7.888126105403682900, -38.29807794501345300, -1.390889459613495300 ) ) ;
+#246 = ORIENTED_EDGE ( 'NONE', *, *, #634, .F. ) ;
+#247 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #476 ), #862 ) ;
+#248 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -3.115235397679452100E-013, 2.776790386377961600E-028 ) ) ;
+#249 = DIRECTION ( 'NONE',  ( -9.237932196073813000E-014, 0.2965404220482086900, 0.9550203024498852300 ) ) ;
+#250 = DIRECTION ( 'NONE',  ( -0.4130873308689206900, 0.3259007012745595000, -0.8503808499633215300 ) ) ;
+#251 = ORIENTED_EDGE ( 'NONE', *, *, #138, .F. ) ;
+#252 = ORIENTED_EDGE ( 'NONE', *, *, #845, .T. ) ;
+#253 = ORIENTED_EDGE ( 'NONE', *, *, #5, .F. ) ;
+#254 = VERTEX_POINT ( 'NONE', #132 ) ;
+#255 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#256 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.2965404220479234700, -0.9550203024499738200 ) ) ;
+#257 = PLANE ( 'NONE',  #841 ) ;
+#258 = EDGE_CURVE ( 'NONE', #844, #844, #515, .T. ) ;
+#259 = LINE ( 'NONE', #296, #865 ) ;
+#260 = ORIENTED_EDGE ( 'NONE', *, *, #284, .F. ) ;
+#261 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -2.137817232115484700, -62.78585320393066400 ) ) ;
+#262 = VECTOR ( 'NONE', #934, 1000.000000000000000 ) ;
+#263 = VERTEX_POINT ( 'NONE', #223 ) ;
+#264 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, -12.59017230916554700, -62.78585320393066400 ) ) ;
+#265 = CIRCLE ( 'NONE', #458, 4.999999999999997300 ) ;
+#266 = ORIENTED_EDGE ( 'NONE', *, *, #258, .T. ) ;
+#267 = DIRECTION ( 'NONE',  ( -0.9848077530122073500, 3.402401762066015800E-017, -0.1736481776669344400 ) ) ;
+#268 = LINE ( 'NONE', #715, #288 ) ;
+#269 = AXIS2_PLACEMENT_3D ( 'NONE', #820, #930, #485 ) ;
+#270 = ORIENTED_EDGE ( 'NONE', *, *, #622, .F. ) ;
+#271 = LINE ( 'NONE', #275, #322 ) ;
+#272 = PLANE ( 'NONE',  #124 ) ;
+#273 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#274 = EDGE_CURVE ( 'NONE', #222, #35, #692, .T. ) ;
+#275 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, 1.500000000000000000, -62.78585320393066400 ) ) ;
+#276 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.841888495014732400E-016, -1.000000000000000000 ) ) ;
+#277 = VECTOR ( 'NONE', #823, 1000.000000000000100 ) ;
+#278 = ORIENTED_EDGE ( 'NONE', *, *, #818, .T. ) ;
+#279 = VERTEX_POINT ( 'NONE', #52 ) ;
+#280 = AXIS2_PLACEMENT_3D ( 'NONE', #624, #621, #508 ) ;
+#281 = DIRECTION ( 'NONE',  ( -0.1736481776669344100, 0.0000000000000000000, 0.9848077530122072400 ) ) ;
+#282 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.148370774788309800, -46.12667563204015400 ) ) ;
+#283 = LINE ( 'NONE', #730, #354 ) ;
+#284 = EDGE_CURVE ( 'NONE', #606, #694, #697, .T. ) ;
+#285 = ORIENTED_EDGE ( 'NONE', *, *, #5, .T. ) ;
+#286 = VECTOR ( 'NONE', #72, 1000.000000000000100 ) ;
+#287 = ORIENTED_EDGE ( 'NONE', *, *, #753, .F. ) ;
+#288 = VECTOR ( 'NONE', #314, 1000.000000000000000 ) ;
+#289 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #709, #717 ) ;
+#290 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#291 = ORIENTED_EDGE ( 'NONE', *, *, #28, .T. ) ;
+#292 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, 6.148370774788303600, -8.081775416243882400 ) ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #100, .T. ) ;
+#294 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #642 ) ) ;
+#295 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#296 = CARTESIAN_POINT ( 'NONE',  ( 6.231290628904547500, -1.851629225141739000, -1.098744662546468300 ) ) ;
+#297 = ORIENTED_EDGE ( 'NONE', *, *, #115, .F. ) ;
+#298 = CARTESIAN_POINT ( 'NONE',  ( 4.999996949955350300, -1.851629225156310200, -8.081758118581111800 ) ) ;
+#299 = VERTEX_POINT ( 'NONE', #592 ) ;
+#300 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#301 = ORIENTED_EDGE ( 'NONE', *, *, #799, .F. ) ;
+#302 = EDGE_CURVE ( 'NONE', #481, #195, #707, .T. ) ;
+#303 = LINE ( 'NONE', #832, #126 ) ;
+#304 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #642, .NOT_KNOWN. ) ;
+#305 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#306 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -9.148888984942267700, -44.81968195884121500 ) ) ;
+#307 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#308 = VERTEX_POINT ( 'NONE', #748 ) ;
+#309 = CARTESIAN_POINT ( 'NONE',  ( -1.692616281353881900, -11.80227393287998800, -62.78585320393066400 ) ) ;
+#310 = ORIENTED_EDGE ( 'NONE', *, *, #753, .T. ) ;
+#311 = DIRECTION ( 'NONE',  ( -0.1736481776669343800, -1.919267227213490600E-016, 0.9848077530122072400 ) ) ;
+#312 = VECTOR ( 'NONE', #71, 1000.000000000000000 ) ;
+#313 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#314 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#315 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#316 = EDGE_LOOP ( 'NONE', ( #218, #241, #252, #33, #246 ) ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, 6.148370774788302700, 1.204688727963847700E-015 ) ) ;
+#318 = LINE ( 'NONE', #874, #875 ) ;
+#319 = ORIENTED_EDGE ( 'NONE', *, *, #527, .F. ) ;
+#320 = LINE ( 'NONE', #895, #286 ) ;
+#321 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ;
+#322 = VECTOR ( 'NONE', #290, 1000.000000000000000 ) ;
+#323 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.175609751745653200E-015, 1.000000000000000000 ) ) ;
+#324 = ORIENTED_EDGE ( 'NONE', *, *, #678, .F. ) ;
+#325 = CIRCLE ( 'NONE', #49, 1.999999999968339500 ) ;
+#326 = ORIENTED_EDGE ( 'NONE', *, *, #647, .T. ) ;
+#327 = EDGE_CURVE ( 'NONE', #864, #386, #705, .T. ) ;
+#328 = VERTEX_POINT ( 'NONE', #261 ) ;
+#329 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.959362523977463200E-016, -1.000000000000000000 ) ) ;
+#330 = CARTESIAN_POINT ( 'NONE',  ( -7.888126105403682900, 6.148370774788302700, -1.390889459613486900 ) ) ;
+#331 = ORIENTED_EDGE ( 'NONE', *, *, #541, .F. ) ;
+#332 = ORIENTED_EDGE ( 'NONE', *, *, #854, .F. ) ;
+#333 = VERTEX_POINT ( 'NONE', #243 ) ;
+#334 = AXIS2_PLACEMENT_3D ( 'NONE', #914, #928, #630 ) ;
+#335 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#336 = PLANE ( 'NONE',  #405 ) ;
+#337 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.959362523977463200E-016 ) ) ;
+#338 = VECTOR ( 'NONE', #568, 1000.000000000000000 ) ;
+#339 = AXIS2_PLACEMENT_3D ( 'NONE', #552, #817, #423 ) ;
+#340 = ORIENTED_EDGE ( 'NONE', *, *, #237, .T. ) ;
+#341 = CYLINDRICAL_SURFACE ( 'NONE', #383, 4.000000000000004400 ) ;
+#342 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#343 = EDGE_CURVE ( 'NONE', #212, #222, #703, .T. ) ;
+#344 = PLANE ( 'NONE',  #794 ) ;
+#345 = VECTOR ( 'NONE', #465, 1000.000000000000000 ) ;
+#346 = VERTEX_POINT ( 'NONE', #90 ) ;
+#347 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.734723475976808100E-016, 1.000000000000000000 ) ) ;
+#348 = LINE ( 'NONE', #359, #392 ) ;
+#349 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#350 = LINE ( 'NONE', #530, #908 ) ;
+#351 = LINE ( 'NONE', #418, #345 ) ;
+#352 = AXIS2_PLACEMENT_3D ( 'NONE', #447, #411, #105 ) ;
+#353 = CARTESIAN_POINT ( 'NONE',  ( -15.55680529667967000, -2.137817232115484700, -62.78585320393066400 ) ) ;
+#354 = VECTOR ( 'NONE', #843, 1000.000000000000000 ) ;
+#355 = DIRECTION ( 'NONE',  ( 0.9848077530122074700, 3.402401762066005300E-017, -0.1736481776669339100 ) ) ;
+#356 = EDGE_LOOP ( 'NONE', ( #134, #77, #301, #253, #97, #107, #47, #834, #548 ) ) ;
+#357 = CARTESIAN_POINT ( 'NONE',  ( -6.252419349247114500, -5.290200270331650900, -62.78585320393066400 ) ) ;
+#358 = EDGE_CURVE ( 'NONE', #30, #598, #443, .T. ) ;
+#359 = CARTESIAN_POINT ( 'NONE',  ( -7.888126105397740100, -1.851629225142016600, -1.390889459647194600 ) ) ;
+#360 = CARTESIAN_POINT ( 'NONE',  ( 6.231290628910491200, -38.29807794501345300, -1.098744662512768800 ) ) ;
+#361 = ORIENTED_EDGE ( 'NONE', *, *, #854, .T. ) ;
+#362 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#363 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#364 = ORIENTED_EDGE ( 'NONE', *, *, #58, .T. ) ;
+#365 = ORIENTED_EDGE ( 'NONE', *, *, #574, .F. ) ;
+#366 = ORIENTED_EDGE ( 'NONE', *, *, #896, .T. ) ;
+#367 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#368 = LINE ( 'NONE', #888, #410 ) ;
+#369 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#370 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#371 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #239 ), #171 ) ;
+#372 = AXIS2_PLACEMENT_3D ( 'NONE', #415, #393, #438 ) ;
+#373 = ORIENTED_EDGE ( 'NONE', *, *, #615, .T. ) ;
+#374 = VERTEX_POINT ( 'NONE', #148 ) ;
+#375 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#376 = VERTEX_POINT ( 'NONE', #149 ) ;
+#377 = ADVANCED_FACE ( 'NONE', ( #498 ), #434, .F. ) ;
+#378 = ORIENTED_EDGE ( 'NONE', *, *, #713, .T. ) ;
+#379 = EDGE_CURVE ( 'NONE', #216, #827, #708, .T. ) ;
+#380 = ORIENTED_EDGE ( 'NONE', *, *, #622, .T. ) ;
+#381 = CARTESIAN_POINT ( 'NONE',  ( 3.499999999968313800, -1.851629225211742100, -41.24896774453872400 ) ) ;
+#382 = ORIENTED_EDGE ( 'NONE', *, *, #258, .F. ) ;
+#383 = AXIS2_PLACEMENT_3D ( 'NONE', #109, #403, #471 ) ;
+#384 = ORIENTED_EDGE ( 'NONE', *, *, #666, .F. ) ;
+#385 = CARTESIAN_POINT ( 'NONE',  ( -15.00000000000000900, -8.165820698173494200, -62.78585320393066400 ) ) ;
+#386 = VERTEX_POINT ( 'NONE', #205 ) ;
+#387 = ADVANCED_FACE ( 'NONE', ( #757 ), #184, .F. ) ;
+#388 = CARTESIAN_POINT ( 'NONE',  ( -6.777552494050568500, -1.503723984841789600, -60.74373051249283900 ) ) ;
+#389 = ADVANCED_FACE ( 'NONE', ( #722 ), #217, .T. ) ;
+#390 = EDGE_LOOP ( 'NONE', ( #714, #278 ) ) ;
+#391 = ADVANCED_FACE ( 'NONE', ( #861 ), #233, .T. ) ;
+#392 = VECTOR ( 'NONE', #563, 1000.000000000000100 ) ;
+#393 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#394 = VECTOR ( 'NONE', #659, 1000.000000000000000 ) ;
+#395 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.9550203024499471800, 0.2965404220480091800 ) ) ;
+#396 = ADVANCED_FACE ( 'NONE', ( #719 ), #257, .F. ) ;
+#397 = DIRECTION ( 'NONE',  ( 0.4828471151417400600, 0.0000000000000000000, 0.8757046667680258300 ) ) ;
+#398 = VERTEX_POINT ( 'NONE', #292 ) ;
+#399 = LINE ( 'NONE', #891, #414 ) ;
+#400 = ADVANCED_FACE ( 'NONE', ( #727, #718 ), #59, .F. ) ;
+#401 = ORIENTED_EDGE ( 'NONE', *, *, #527, .T. ) ;
+#402 = EDGE_CURVE ( 'NONE', #598, #694, #716, .T. ) ;
+#403 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#404 = VECTOR ( 'NONE', #488, 1000.000000000000000 ) ;
+#405 = AXIS2_PLACEMENT_3D ( 'NONE', #478, #395, #463 ) ;
+#406 = ADVANCED_FACE ( 'NONE', ( #731 ), #344, .F. ) ;
+#407 = ORIENTED_EDGE ( 'NONE', *, *, #801, .F. ) ;
+#408 = EDGE_LOOP ( 'NONE', ( #266 ) ) ;
+#409 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947012554700, -5.720226402341793900, -59.63660709188848600 ) ) ;
+#410 = VECTOR ( 'NONE', #825, 1000.000000000000000 ) ;
+#411 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#412 = ORIENTED_EDGE ( 'NONE', *, *, #541, .T. ) ;
+#413 = ADVANCED_FACE ( 'NONE', ( #729 ), #903, .F. ) ;
+#414 = VECTOR ( 'NONE', #474, 1000.000000000000000 ) ;
+#415 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.852002847315692000, -4.071750416243878200 ) ) ;
+#416 = LINE ( 'NONE', #147, #338 ) ;
+#417 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947012554700, -5.720226402341793900, -59.63660709188848600 ) ) ;
+#418 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -8.165820698173494200, -53.36767462975518600 ) ) ;
+#419 = ADVANCED_FACE ( 'NONE', ( #554 ), #336, .F. ) ;
+#420 = LINE ( 'NONE', #885, #404 ) ;
+#421 = CARTESIAN_POINT ( 'NONE',  ( -13.43342383045584200, -1.852002847315690000, -74.48309681854583200 ) ) ;
+#422 = EDGE_CURVE ( 'NONE', #221, #564, #764, .T. ) ;
+#423 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -8.673617380021340700E-016, -1.000000000000000000 ) ) ;
+#424 = ADVANCED_FACE ( 'NONE', ( #732 ), #341, .T. ) ;
+#425 = ORIENTED_EDGE ( 'NONE', *, *, #634, .T. ) ;
+#426 = ORIENTED_EDGE ( 'NONE', *, *, #379, .F. ) ;
+#427 = ADVANCED_FACE ( 'NONE', ( #740 ), #432, .T. ) ;
+#428 = LINE ( 'NONE', #739, #456 ) ;
+#429 = ORIENTED_EDGE ( 'NONE', *, *, #74, .T. ) ;
+#430 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#431 = ORIENTED_EDGE ( 'NONE', *, *, #685, .T. ) ;
+#432 = PLANE ( 'NONE',  #372 ) ;
+#433 = ADVANCED_FACE ( 'NONE', ( #741 ), #8, .T. ) ;
+#434 = CYLINDRICAL_SURFACE ( 'NONE', #23, 4.699999999999999300 ) ;
+#435 = VECTOR ( 'NONE', #19, 1000.000000000000000 ) ;
+#436 = DIRECTION ( 'NONE',  ( -0.1736481776669344100, -1.277927549997550300E-016, 0.9848077530122072400 ) ) ;
+#437 = ADVANCED_FACE ( 'NONE', ( #742, #743 ), #754, .F. ) ;
+#438 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#439 = DIRECTION ( 'NONE',  ( -1.803877777705762900E-013, 0.9550203024499737100, -0.2965404220479239700 ) ) ;
+#440 = ADVANCED_FACE ( 'NONE', ( #763 ), #909, .F. ) ;
+#441 = PLANE ( 'NONE',  #769 ) ;
+#442 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#443 = LINE ( 'NONE', #141, #723 ) ;
+#444 = VERTEX_POINT ( 'NONE', #86 ) ;
+#445 = ADVANCED_FACE ( 'NONE', ( #542 ), #441, .T. ) ;
+#446 = ORIENTED_EDGE ( 'NONE', *, *, #818, .F. ) ;
+#447 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -9.665820698173492400, -4.071750416243878200 ) ) ;
+#448 = EDGE_CURVE ( 'NONE', #935, #73, #747, .T. ) ;
+#449 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #851, 'design' ) ;
+#450 = ADVANCED_FACE ( 'NONE', ( #781 ), #483, .F. ) ;
+#451 = CARTESIAN_POINT ( 'NONE',  ( 4.993575073710539800, 6.148619852591684400, -74.44664716247020000 ) ) ;
+#452 = ORIENTED_EDGE ( 'NONE', *, *, #725, .T. ) ;
+#453 = VECTOR ( 'NONE', #135, 1000.000000000000000 ) ;
+#454 = PLANE ( 'NONE',  #242 ) ;
+#455 = CARTESIAN_POINT ( 'NONE',  ( -8.293193397947160200, -1.852002847315700400, 0.9063613123100449100 ) ) ;
+#456 = VECTOR ( 'NONE', #83, 1000.000000000000100 ) ;
+#457 = PLANE ( 'NONE',  #173 ) ;
+#458 = AXIS2_PLACEMENT_3D ( 'NONE', #879, #586, #347 ) ;
+#459 = ORIENTED_EDGE ( 'NONE', *, *, #138, .T. ) ;
+#460 = VERTEX_POINT ( 'NONE', #357 ) ;
+#461 = ADVANCED_FACE ( 'NONE', ( #759 ), #454, .F. ) ;
+#462 = SURFACE_STYLE_FILL_AREA ( #491 ) ;
+#463 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.2965404220480091800, -0.9550203024499471800 ) ) ;
+#464 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.9550203024499738200, -0.2965404220479234700 ) ) ;
+#465 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#466 = ORIENTED_EDGE ( 'NONE', *, *, #845, .F. ) ;
+#467 = AXIS2_PLACEMENT_3D ( 'NONE', #545, #164, #778 ) ;
+#468 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.297641642329464700E-016, 1.000000000000000000 ) ) ;
+#469 = ORIENTED_EDGE ( 'NONE', *, *, #402, .F. ) ;
+#470 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -8.165820698173481800, 1.780336393884100500E-015 ) ) ;
+#471 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#472 = ADVANCED_FACE ( 'NONE', ( #738 ), #575, .T. ) ;
+#473 = ORIENTED_EDGE ( 'NONE', *, *, #871, .F. ) ;
+#474 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 1.959365083918120100E-016 ) ) ;
+#475 = EDGE_CURVE ( 'NONE', #374, #211, #765, .T. ) ;
+#476 = STYLED_ITEM ( 'NONE', ( #819 ), #524 ) ;
+#477 = SHAPE_DEFINITION_REPRESENTATION ( #927, #826 ) ;
+#478 = CARTESIAN_POINT ( 'NONE',  ( -15.55680529667967000, -0.0006483706735198845100, -55.90301531510323200 ) ) ;
+#479 = ADVANCED_FACE ( 'NONE', ( #782 ), #863, .F. ) ;
+#480 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947013850500, -1.560967573353842600, -60.92808578128445900 ) ) ;
+#481 = VERTEX_POINT ( 'NONE', #32 ) ;
+#482 = ORIENTED_EDGE ( 'NONE', *, *, #567, .T. ) ;
+#483 = PLANE ( 'NONE',  #280 ) ;
+#484 = EDGE_LOOP ( 'NONE', ( #609, #573, #633, #604, #228, #608 ) ) ;
+#485 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#486 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -14.46381453806527000, -51.41210389838368400 ) ) ;
+#487 = ADVANCED_FACE ( 'NONE', ( #766 ), #850, .F. ) ;
+#488 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#489 = CARTESIAN_POINT ( 'NONE',  ( -15.00000000000000900, -8.165820698173481800, 1.780336393884100500E-015 ) ) ;
+#490 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#491 = FILL_AREA_STYLE ('',( #3 ) ) ;
+#492 = ADVANCED_FACE ( 'NONE', ( #780 ), #457, .T. ) ;
+#493 = SURFACE_STYLE_USAGE ( .BOTH. , #749 ) ;
+#494 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#495 = ORIENTED_EDGE ( 'NONE', *, *, #41, .F. ) ;
+#496 = ADVANCED_FACE ( 'NONE', ( #812 ), #595, .T. ) ;
+#497 = EDGE_CURVE ( 'NONE', #174, #772, #811, .T. ) ;
+#498 = FACE_OUTER_BOUND ( 'NONE', #837, .T. ) ;
+#499 = ORIENTED_EDGE ( 'NONE', *, *, #760, .T. ) ;
+#500 = ORIENTED_EDGE ( 'NONE', *, *, #814, .T. ) ;
+#501 = ADVANCED_FACE ( 'NONE', ( #784, #610 ), #576, .T. ) ;
+#502 = FILL_AREA_STYLE ('',( #746 ) ) ;
+#503 = ORIENTED_EDGE ( 'NONE', *, *, #237, .F. ) ;
+#504 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -1.851629225211703900, -8.081775416243882400 ) ) ;
+#505 = ADVANCED_FACE ( 'NONE', ( #664 ), #272, .T. ) ;
+#506 = ORIENTED_EDGE ( 'NONE', *, *, #870, .F. ) ;
+#507 = CARTESIAN_POINT ( 'NONE',  ( -15.78902719107936500, -8.885144265101898100, -55.68339586713727100 ) ) ;
+#508 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#509 = ADVANCED_FACE ( 'NONE', ( #787 ), #675, .T. ) ;
+#510 = ORIENTED_EDGE ( 'NONE', *, *, #790, .T. ) ;
+#511 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #430 ) ;
+#512 = DIRECTION ( 'NONE',  ( 0.4999999999999188400, 0.2568115387428253600, 0.8270718430515111600 ) ) ;
+#513 = ORIENTED_EDGE ( 'NONE', *, *, #829, .T. ) ;
+#514 = ADVANCED_FACE ( 'NONE', ( #785 ), #849, .T. ) ;
+#515 = CIRCLE ( 'NONE', #917, 1.999999999968339500 ) ;
+#516 = VERTEX_POINT ( 'NONE', #791 ) ;
+#517 = ADVANCED_FACE ( 'NONE', ( #846 ), #907, .F. ) ;
+#518 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -9.665820698173492400, -53.36767462975518600 ) ) ;
+#519 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -0.3520028473156919200, -4.071750416243878200 ) ) ;
+#520 = VECTOR ( 'NONE', #882, 1000.000000000000000 ) ;
+#521 = LINE ( 'NONE', #480, #435 ) ;
+#522 = DIRECTION ( 'NONE',  ( -0.8660254037844855600, 0.1482702110237887100, 0.4775101512249556600 ) ) ;
+#523 = ADVANCED_FACE ( 'NONE', ( #807 ), #641, .T. ) ;
+#524 = MANIFOLD_SOLID_BREP ( 'Combine1', #214 ) ;
+#525 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.175609751745653400E-015 ) ) ;
+#526 = ADVANCED_FACE ( 'NONE', ( #786 ), #118, .T. ) ;
+#527 = EDGE_CURVE ( 'NONE', #73, #346, #878, .T. ) ;
+#528 = AXIS2_PLACEMENT_3D ( 'NONE', #833, #29, #27 ) ;
+#529 = SURFACE_STYLE_USAGE ( .BOTH. , #34 ) ;
+#530 = CARTESIAN_POINT ( 'NONE',  ( -3.851134893173926900, -8.166071956620756500, -53.36759470659349300 ) ) ;
+#531 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#532 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#533 = ORIENTED_EDGE ( 'NONE', *, *, #63, .T. ) ;
+#534 = ORIENTED_EDGE ( 'NONE', *, *, #581, .T. ) ;
+#535 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#536 = DIRECTION ( 'NONE',  ( 0.5735764363510439400, -0.8191520442889933500, 0.0000000000000000000 ) ) ;
+#537 = ORIENTED_EDGE ( 'NONE', *, *, #567, .F. ) ;
+#538 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.148370774788302700, 1.204688727963847700E-015 ) ) ;
+#539 = LINE ( 'NONE', #199, #929 ) ;
+#540 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 1.959365083918120100E-016 ) ) ;
+#541 = EDGE_CURVE ( 'NONE', #238, #18, #798, .T. ) ;
+#542 = FACE_OUTER_BOUND ( 'NONE', #160, .T. ) ;
+#543 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.841888495014732400E-016 ) ) ;
+#544 = ORIENTED_EDGE ( 'NONE', *, *, #41, .T. ) ;
+#545 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, 2.148370774788305400, -74.48309681854583200 ) ) ;
+#546 = VECTOR ( 'NONE', #397, 1000.000000000000100 ) ;
+#547 = ORIENTED_EDGE ( 'NONE', *, *, #822, .T. ) ;
+#548 = ORIENTED_EDGE ( 'NONE', *, *, #678, .T. ) ;
+#549 = EDGE_CURVE ( 'NONE', #864, #460, #661, .T. ) ;
+#550 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947014112500, -0.7197206791523429500, -58.21881647564669700 ) ) ;
+#551 = CARTESIAN_POINT ( 'NONE',  ( -6.028364447308322700, -4.315815410331476100, -62.78585320393066400 ) ) ;
+#552 = CARTESIAN_POINT ( 'NONE',  ( 3.499999999968313800, 11.14837077478826200, -41.24900233933923500 ) ) ;
+#553 = EDGE_CURVE ( 'NONE', #906, #215, #815, .T. ) ;
+#554 = FACE_OUTER_BOUND ( 'NONE', #13, .T. ) ;
+#555 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.852002847315692000, -4.071750416243878200 ) ) ;
+#556 = COLOUR_RGB ( '',0.7529411764705882200, 0.7529411764705882200, 0.7529411764705882200 ) ;
+#557 = ORIENTED_EDGE ( 'NONE', *, *, #902, .F. ) ;
+#558 = VERTEX_POINT ( 'NONE', #770 ) ;
+#559 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.2965404220480091800, -0.9550203024499471800 ) ) ;
+#560 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.174908292283969600E-015 ) ) ;
+#561 = ORIENTED_EDGE ( 'NONE', *, *, #574, .T. ) ;
+#562 = CARTESIAN_POINT ( 'NONE',  ( -15.55680529667967000, -0.3520028473156919200, -57.03456647508515000 ) ) ;
+#563 = DIRECTION ( 'NONE',  ( 0.1736481776669344100, -9.388996079010221500E-013, -0.9848077530122072400 ) ) ;
+#564 = VERTEX_POINT ( 'NONE', #921 ) ;
+#565 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #883, #188, #137, #417 ),
+ .UNSPECIFIED., .F., .F. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 2.482016870338593000, 3.141592653589996100 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9640740363244149100, 0.9640740363244149100, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#566 = CARTESIAN_POINT ( 'NONE',  ( 5.000000000000000000, 2.148370774788300100, -8.081775416243882400 ) ) ;
+#567 = EDGE_CURVE ( 'NONE', #94, #333, #752, .T. ) ;
+#568 = DIRECTION ( 'NONE',  ( 3.454889293528785600E-017, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#569 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#570 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -3.469446951953616200E-016, 1.000000000000000000 ) ) ;
+#571 = ORIENTED_EDGE ( 'NONE', *, *, #783, .T. ) ;
+#572 = DIRECTION ( 'NONE',  ( -0.1736481776669338800, 0.0000000000000000000, -0.9848077530122073500 ) ) ;
+#573 = ORIENTED_EDGE ( 'NONE', *, *, #799, .T. ) ;
+#574 = EDGE_CURVE ( 'NONE', #139, #89, #912, .T. ) ;
+#575 = PLANE ( 'NONE',  #231 ) ;
+#576 = PLANE ( 'NONE',  #146 ) ;
+#577 = CARTESIAN_POINT ( 'NONE',  ( 2.937462482337702700, -0.3520028473156938700, -62.78585320393066400 ) ) ;
+#578 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#579 = CARTESIAN_POINT ( 'NONE',  ( 5.000000000000000000, -38.29807794501345300, -7.510441352237891500E-015 ) ) ;
+#580 = EDGE_LOOP ( 'NONE', ( #39, #6, #202, #544, #842, #128, #200, #37 ) ) ;
+#581 = EDGE_CURVE ( 'NONE', #516, #112, #539, .T. ) ;
+#582 = EDGE_LOOP ( 'NONE', ( #894, #710, #593, #425, #378, #380 ) ) ;
+#583 = CARTESIAN_POINT ( 'NONE',  ( 2.937462482337702700, -5.655959984764736100E-016, -62.78585320393066400 ) ) ;
+#584 = ORIENTED_EDGE ( 'NONE', *, *, #343, .T. ) ;
+#585 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.175609751745653200E-015, -1.000000000000000000 ) ) ;
+#586 = DIRECTION ( 'NONE',  ( 4.930380657631323800E-032, 1.000000000000000000, 1.998693386543730500E-016 ) ) ;
+#587 = ORIENTED_EDGE ( 'NONE', *, *, #379, .T. ) ;
+#588 = EDGE_CURVE ( 'NONE', #803, #54, #913, .T. ) ;
+#589 = AXIS2_PLACEMENT_3D ( 'NONE', #519, #349, #363 ) ;
+#590 = ORIENTED_EDGE ( 'NONE', *, *, #745, .F. ) ;
+#591 = ORIENTED_EDGE ( 'NONE', *, *, #153, .T. ) ;
+#592 = CARTESIAN_POINT ( 'NONE',  ( -4.238888248642437500, -8.165820698173494200, -62.78585320393066400 ) ) ;
+#593 = ORIENTED_EDGE ( 'NONE', *, *, #829, .F. ) ;
+#594 = EDGE_CURVE ( 'NONE', #516, #35, #919, .T. ) ;
+#595 = CYLINDRICAL_SURFACE ( 'NONE', #155, 4.999999999999997300 ) ;
+#596 = ORIENTED_EDGE ( 'NONE', *, *, #203, .T. ) ;
+#597 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#598 = VERTEX_POINT ( 'NONE', #108 ) ;
+#599 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.148370774788302700, 1.204688727963847700E-015 ) ) ;
+#600 = ORIENTED_EDGE ( 'NONE', *, *, #725, .F. ) ;
+#601 = PRESENTATION_STYLE_ASSIGNMENT (( #529 ) ) ;
+#602 = ORIENTED_EDGE ( 'NONE', *, *, #302, .T. ) ;
+#603 = EDGE_LOOP ( 'NONE', ( #711, #324, #797, #788, #61, #503, #836, #114 ) ) ;
+#604 = ORIENTED_EDGE ( 'NONE', *, *, #588, .F. ) ;
+#605 = EDGE_CURVE ( 'NONE', #94, #308, #750, .T. ) ;
+#606 = VERTEX_POINT ( 'NONE', #734 ) ;
+#607 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 1.959365083918120100E-016 ) ) ;
+#608 = ORIENTED_EDGE ( 'NONE', *, *, #21, .T. ) ;
+#609 = ORIENTED_EDGE ( 'NONE', *, *, #553, .T. ) ;
+#610 = FACE_BOUND ( 'NONE', #877, .T. ) ;
+#611 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -8.165820698173494200, -53.36767462975518600 ) ) ;
+#612 = LINE ( 'NONE', #385, #619 ) ;
+#613 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -8.165820698173492400, -62.78585320393066400 ) ) ;
+#614 = CARTESIAN_POINT ( 'NONE',  ( 4.336808689942017700E-016, -38.29807794501344600, -36.43814991900630000 ) ) ;
+#615 = EDGE_CURVE ( 'NONE', #174, #238, #920, .T. ) ;
+#616 = ORIENTED_EDGE ( 'NONE', *, *, #422, .F. ) ;
+#617 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #307, 'distance_accuracy_value', 'NONE');
+#618 = ORIENTED_EDGE ( 'NONE', *, *, #666, .T. ) ;
+#619 = VECTOR ( 'NONE', #665, 1000.000000000000000 ) ;
+#620 = CARTESIAN_POINT ( 'NONE',  ( -5.688060255819205900, -2.137817232117876100, -62.78585320393066400 ) ) ;
+#621 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#622 = EDGE_CURVE ( 'NONE', #398, #935, #51, .T. ) ;
+#623 = CARTESIAN_POINT ( 'NONE',  ( -6.252419349247114500, -5.290200270331650900, -62.78585320393066400 ) ) ;
+#624 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#625 = VECTOR ( 'NONE', #44, 1000.000000000000100 ) ;
+#626 = CARTESIAN_POINT ( 'NONE',  ( -5.251134893174421100, -0.7197206791526318300, -58.21881647564763500 ) ) ;
+#627 = EDGE_CURVE ( 'NONE', #516, #564, #350, .T. ) ;
+#628 = LINE ( 'NONE', #78, #629 ) ;
+#629 = VECTOR ( 'NONE', #167, 1000.000000000000000 ) ;
+#630 = DIRECTION ( 'NONE',  ( -0.5735764363510439400, 0.8191520442889933500, 0.0000000000000000000 ) ) ;
+#631 = ORIENTED_EDGE ( 'NONE', *, *, #327, .T. ) ;
+#632 = LINE ( 'NONE', #868, #625 ) ;
+#633 = ORIENTED_EDGE ( 'NONE', *, *, #745, .T. ) ;
+#634 = EDGE_CURVE ( 'NONE', #376, #30, #50, .T. ) ;
+#635 = VECTOR ( 'NONE', #133, 1000.000000000000000 ) ;
+#636 = VECTOR ( 'NONE', #76, 1000.000000000000000 ) ;
+#637 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -1.852002847315691800, -65.05788579290296500 ) ) ;
+#638 = ORIENTED_EDGE ( 'NONE', *, *, #857, .F. ) ;
+#639 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.0006483706735198845100, -55.90301531510323200 ) ) ;
+#640 = LINE ( 'NONE', #159, #394 ) ;
+#641 = CYLINDRICAL_SURFACE ( 'NONE', #1, 4.000373622103994700 ) ;
+#642 = PRODUCT ( 'Mag_Release_Right_V0.2A', 'Mag_Release_Right_V0.2A', '', ( #157 ) ) ;
+#643 = VECTOR ( 'NONE', #335, 1000.000000000000000 ) ;
+#644 = LINE ( 'NONE', #792, #696 ) ;
+#645 = LINE ( 'NONE', #421, #312 ) ;
+#646 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.148370774788309800, -44.81968195884121500 ) ) ;
+#647 = EDGE_CURVE ( 'NONE', #906, #216, #767, .T. ) ;
+#648 = LINE ( 'NONE', #538, #635 ) ;
+#649 = CARTESIAN_POINT ( 'NONE',  ( 3.499999999968313800, -9.148888984942267700, -41.24896774453872400 ) ) ;
+#650 = EDGE_LOOP ( 'NONE', ( #924, #285, #10, #326, #361 ) ) ;
+#651 = EDGE_LOOP ( 'NONE', ( #499, #500, #506, #473, #183, #469, #466, #446, #482 ) ) ;
+#652 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -8.165820698173494200, -53.36767462975518600 ) ) ;
+#653 = LINE ( 'NONE', #724, #668 ) ;
+#654 = DIRECTION ( 'NONE',  ( 9.237932196071342900E-014, -0.2965404220481293600, -0.9550203024499097600 ) ) ;
+#655 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 1.959365083918120100E-016 ) ) ;
+#656 = ORIENTED_EDGE ( 'NONE', *, *, #699, .T. ) ;
+#657 = CARTESIAN_POINT ( 'NONE',  ( 5.000000000000000000, 2.148370774788305400, -74.48309681854583200 ) ) ;
+#658 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#659 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.175609751745653200E-015, 1.000000000000000000 ) ) ;
+#660 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#661 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #620, #901, #551, #623 ),
+ .UNSPECIFIED., .F., .T. ) 
+ B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
+ ( 1.997515206319036700, 2.230372110046035900 ),
+ .UNSPECIFIED. ) 
+ CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9954865738338591900, 0.9954865738338591900, 1.000000000000000000 ) ) 
+ REPRESENTATION_ITEM ( '' )  );
+#662 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947011569700, -8.885144265098908500, -55.68339586713818800 ) ) ;
+#663 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -5.758911772744590400, -58.07676391684292100 ) ) ;
+#664 = FACE_OUTER_BOUND ( 'NONE', #390, .T. ) ;
+#665 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#666 = EDGE_CURVE ( 'NONE', #73, #346, #156, .T. ) ;
+#667 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3520028473156923700, -55.79391922094841000 ) ) ;
+#668 = VECTOR ( 'NONE', #323, 1000.000000000000000 ) ;
+#669 = LINE ( 'NONE', #43, #693 ) ;
+#670 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#671 = VECTOR ( 'NONE', #922, 1000.000000000000000 ) ;
+#672 = VECTOR ( 'NONE', #805, 1000.000000000000000 ) ;
+#673 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999999100, 6.148370774788317000, -74.42842400605783800 ) ) ;
+#674 = LINE ( 'NONE', #599, #672 ) ;
+#675 = PLANE ( 'NONE',  #111 ) ;
+#676 = ORIENTED_EDGE ( 'NONE', *, *, #21, .F. ) ;
+#677 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, 6.148370774788302700, 1.204688727963847700E-015 ) ) ;
+#678 = EDGE_CURVE ( 'NONE', #195, #210, #303, .T. ) ;
+#679 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -1.851629225211703900, -8.081775416243882400 ) ) ;
+#680 = ORIENTED_EDGE ( 'NONE', *, *, #627, .F. ) ;
+#681 = CARTESIAN_POINT ( 'NONE',  ( -8.182225501296203500, -9.665820698173492400, -53.36767462975518600 ) ) ;
+#682 = CARTESIAN_POINT ( 'NONE',  ( 3.499999999968313800, 6.148370774788309000, -43.24900233930757300 ) ) ;
+#683 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.9550203024499738200, -0.2965404220479234100 ) ) ;
+#684 = LINE ( 'NONE', #562, #688 ) ;
+#685 = EDGE_CURVE ( 'NONE', #254, #827, #24, .T. ) ;
+#686 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.852002847315692000, -62.78585320393066400 ) ) ;
+#687 = CARTESIAN_POINT ( 'NONE',  ( -8.182225501296203500, -0.3520028473156917000, -53.36767462975518600 ) ) ;
+#688 = VECTOR ( 'NONE', #369, 1000.000000000000000 ) ;
+#689 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.2965404220479234100, -0.9550203024499738200 ) ) ;
+#690 = VECTOR ( 'NONE', #68, 1000.000000000000000 ) ;
+#691 = ORIENTED_EDGE ( 'NONE', *, *, #871, .T. ) ;
+#692 = LINE ( 'NONE', #2, #690 ) ;
+#693 = VECTOR ( 'NONE', #932, 1000.000000000000000 ) ;
+#694 = VERTEX_POINT ( 'NONE', #282 ) ;
+#695 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#696 = VECTOR ( 'NONE', #490, 1000.000000000000000 ) ;
+#697 = LINE ( 'NONE', #162, #751 ) ;
+#698 = CARTESIAN_POINT ( 'NONE',  ( 1.276783490580139400, -1.851629225191570500, -53.36767462975517900 ) ) ;
+#699 = EDGE_CURVE ( 'NONE', #180, #558, #66, .T. ) ;
+#700 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#701 = VECTOR ( 'NONE', #273, 1000.000000000000000 ) ;
+#702 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#703 = LINE ( 'NONE', #125, #453 ) ;
+#704 = VECTOR ( 'NONE', #755, 1000.000000000000000 ) ;
+#705 = CIRCLE ( 'NONE', #904, 4.699999999999994800 ) ;
+#706 = CARTESIAN_POINT ( 'NONE',  ( -13.43342383045584200, 2.148370774788305400, -74.48309681854583200 ) ) ;
+#707 = LINE ( 'NONE', #85, #701 ) ;
+#708 = LINE ( 'NONE', #179, #704 ) ;
+#709 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#710 = ORIENTED_EDGE ( 'NONE', *, *, #475, .T. ) ;
+#711 = ORIENTED_EDGE ( 'NONE', *, *, #814, .F. ) ;
+#712 = ORIENTED_EDGE ( 'NONE', *, *, #175, .T. ) ;
+#713 = EDGE_CURVE ( 'NONE', #30, #398, #804, .T. ) ;
+#714 = ORIENTED_EDGE ( 'NONE', *, *, #605, .F. ) ;
+#715 = CARTESIAN_POINT ( 'NONE',  ( 5.000000000000000000, 0.0000000000000000000, -74.48309681854583200 ) ) ;
+#716 = LINE ( 'NONE', #330, #735 ) ;
+#717 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#718 = FACE_OUTER_BOUND ( 'NONE', #580, .T. ) ;
+#719 = FACE_OUTER_BOUND ( 'NONE', #356, .T. ) ;
+#720 = VECTOR ( 'NONE', #821, 1000.000000000000000 ) ;
+#721 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -1.851629225211693900, 2.176793373776115600E-015 ) ) ;
+#722 = FACE_OUTER_BOUND ( 'NONE', #102, .T. ) ;
+#723 = VECTOR ( 'NONE', #151, 1000.000000000000000 ) ;
+#724 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.851629225211693900, 2.176793373776115600E-015 ) ) ;
+#725 = EDGE_CURVE ( 'NONE', #481, #328, #99, .T. ) ;
+#726 = VECTOR ( 'NONE', #436, 1000.000000000000100 ) ;
+#727 = FACE_BOUND ( 'NONE', #408, .T. ) ;
+#728 = CARTESIAN_POINT ( 'NONE',  ( 8.310073600551783500, -8.165820698173483500, -5.068059720608666800 ) ) ;
+#729 = FACE_OUTER_BOUND ( 'NONE', #603, .T. ) ;
+#730 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.852002847315692000, -62.78585320393066400 ) ) ;
+#731 = FACE_OUTER_BOUND ( 'NONE', #208, .T. ) ;
+#732 = FACE_OUTER_BOUND ( 'NONE', #87, .T. ) ;
+#733 = EDGE_LOOP ( 'NONE', ( #60, #591, #15, #931, #331, #84, #873, #691, #656, #31 ) ) ;
+#734 = CARTESIAN_POINT ( 'NONE',  ( 1.734723475976807100E-015, -1.851629225184666900, -46.12667563204016100 ) ) ;
+#735 = VECTOR ( 'NONE', #311, 1000.000000000000100 ) ;
+#736 = EDGE_CURVE ( 'NONE', #460, #299, #122, .T. ) ;
+#737 = SURFACE_STYLE_FILL_AREA ( #502 ) ;
+#738 = FACE_OUTER_BOUND ( 'NONE', #67, .T. ) ;
+#739 = CARTESIAN_POINT ( 'NONE',  ( -6.945137819846885400, -2.692586260272048700, -57.60622804106865400 ) ) ;
+#740 = FACE_OUTER_BOUND ( 'NONE', #116, .T. ) ;
+#741 = FACE_OUTER_BOUND ( 'NONE', #484, .T. ) ;
+#742 = FACE_OUTER_BOUND ( 'NONE', #838, .T. ) ;
+#743 = FACE_OUTER_BOUND ( 'NONE', #154, .T. ) ;
+#744 = LINE ( 'NONE', #728, #636 ) ;
+#745 = EDGE_CURVE ( 'NONE', #170, #54, #232, .T. ) ;
+#746 = FILL_AREA_STYLE_COLOUR ( '', #808 ) ;
+#747 = LINE ( 'NONE', #504, #758 ) ;
+#748 = CARTESIAN_POINT ( 'NONE',  ( 4.999999999999996400, 6.148744396892299200, -74.48309681854583200 ) ) ;
+#749 = SURFACE_SIDE_STYLE ('',( #737 ) ) ;
+#750 = CIRCLE ( 'NONE', #17, 4.000373622103994700 ) ;
+#751 = VECTOR ( 'NONE', #101, 1000.000000000000000 ) ;
+#752 = LINE ( 'NONE', #455, #726 ) ;
+#753 = EDGE_CURVE ( 'NONE', #18, #263, #169, .T. ) ;
+#754 = CYLINDRICAL_SURFACE ( 'NONE', #339, 1.999999999968339500 ) ;
+#755 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.9550203024499738200, -0.2965404220479234100 ) ) ;
+#756 = CARTESIAN_POINT ( 'NONE',  ( -2.191194522263616200, -8.165820698173494200, -53.36767462975518600 ) ) ;
+#757 = FACE_OUTER_BOUND ( 'NONE', #884, .T. ) ;
+#758 = VECTOR ( 'NONE', #937, 1000.000000000000000 ) ;
+#759 = FACE_OUTER_BOUND ( 'NONE', #16, .T. ) ;
+#760 = EDGE_CURVE ( 'NONE', #333, #210, #190, .T. ) ;
+#761 = CARTESIAN_POINT ( 'NONE',  ( -4.535205551297924100, -0.3520028473156905900, -57.03456647508515000 ) ) ;
+#762 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#763 = FACE_OUTER_BOUND ( 'NONE', #69, .T. ) ;
+#764 = LINE ( 'NONE', #207, #546 ) ;
+#765 = CIRCLE ( 'NONE', #234, 7.999999999999992900 ) ;
+#766 = FACE_OUTER_BOUND ( 'NONE', #889, .T. ) ;
+#767 = LINE ( 'NONE', #611, #12 ) ;
+#768 = CARTESIAN_POINT ( 'NONE',  ( 5.000000000000000000, -38.29807794501345300, -7.510441352237891500E-015 ) ) ;
+#769 = AXIS2_PLACEMENT_3D ( 'NONE', #926, #522, #512 ) ;
+#770 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.851629225211755900, -53.36767462975518600 ) ) ;
+#771 = VECTOR ( 'NONE', #540, 1000.000000000000000 ) ;
+#772 = VERTEX_POINT ( 'NONE', #646 ) ;
+#773 = DIRECTION ( 'NONE',  ( 0.1736481776669338800, 9.388996079010221500E-013, 0.9848077530122073500 ) ) ;
+#774 = EDGE_CURVE ( 'NONE', #212, #386, #193, .T. ) ;
+#775 = CARTESIAN_POINT ( 'NONE',  ( 5.000000000000000000, -38.29807794501345300, -8.081740820918344800 ) ) ;
+#776 = DIRECTION ( 'NONE',  ( -8.673617379884040400E-016, -1.170938346284345400E-015, -1.000000000000000000 ) ) ;
+#777 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -0.3520028473156919200, 0.0000000000000000000 ) ) ;
+#778 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#779 = VECTOR ( 'NONE', #531, 1000.000000000000000 ) ;
+#780 = FACE_OUTER_BOUND ( 'NONE', #650, .T. ) ;
+#781 = FACE_OUTER_BOUND ( 'NONE', #96, .T. ) ;
+#782 = FACE_OUTER_BOUND ( 'NONE', #172, .T. ) ;
+#783 = EDGE_CURVE ( 'NONE', #139, #212, #127, .T. ) ;
+#784 = FACE_OUTER_BOUND ( 'NONE', #733, .T. ) ;
+#785 = FACE_OUTER_BOUND ( 'NONE', #187, .T. ) ;
+#786 = FACE_OUTER_BOUND ( 'NONE', #582, .T. ) ;
+#787 = FACE_OUTER_BOUND ( 'NONE', #106, .T. ) ;
+#788 = ORIENTED_EDGE ( 'NONE', *, *, #219, .F. ) ;
+#789 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.175609751745653200E-015, 1.000000000000000000 ) ) ;
+#790 = EDGE_CURVE ( 'NONE', #195, #328, #220, .T. ) ;
+#791 = CARTESIAN_POINT ( 'NONE',  ( -3.851134893173922000, -6.003644798345699300, -54.03904332450983400 ) ) ;
+#792 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -0.3520028473156917000, -55.79391922094841000 ) ) ;
+#793 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#794 = AXIS2_PLACEMENT_3D ( 'NONE', #360, #355, #572 ) ;
+#795 = EDGE_CURVE ( 'NONE', #328, #864, #240, .T. ) ;
+#796 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#797 = ORIENTED_EDGE ( 'NONE', *, *, #302, .F. ) ;
+#798 = LINE ( 'NONE', #25, #893 ) ;
+#799 = EDGE_CURVE ( 'NONE', #215, #170, #271, .T. ) ;
+#800 = ORIENTED_EDGE ( 'NONE', *, *, #886, .F. ) ;
+#801 = EDGE_CURVE ( 'NONE', #772, #152, #265, .T. ) ;
+#802 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947013982000, -0.7197206791526318300, -58.21881647564763500 ) ) ;
+#803 = VERTEX_POINT ( 'NONE', #858 ) ;
+#804 = LINE ( 'NONE', #677, #62 ) ;
+#805 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.959362523977463200E-016, 1.000000000000000000 ) ) ;
+#806 = ORIENTED_EDGE ( 'NONE', *, *, #916, .T. ) ;
+#807 = FACE_OUTER_BOUND ( 'NONE', #316, .T. ) ;
+#808 = COLOUR_RGB ( '',0.7529411764705882200, 0.7529411764705882200, 0.7529411764705882200 ) ;
+#809 = DIRECTION ( 'NONE',  ( -2.975113051694695300E-013, 0.9550203024499738200, -0.2965404220479234700 ) ) ;
+#810 = ORIENTED_EDGE ( 'NONE', *, *, #647, .F. ) ;
+#811 = LINE ( 'NONE', #306, #771 ) ;
+#812 = FACE_OUTER_BOUND ( 'NONE', #847, .T. ) ;
+#813 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #144, 'distance_accuracy_value', 'NONE');
+#814 = EDGE_CURVE ( 'NONE', #210, #279, #320, .T. ) ;
+#815 = LINE ( 'NONE', #470, #887 ) ;
+#816 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.851629225211746600, -44.81968195884121500 ) ) ;
+#817 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 1.175609751745653600E-015 ) ) ;
+#818 = EDGE_CURVE ( 'NONE', #94, #308, #268, .T. ) ;
+#819 = PRESENTATION_STYLE_ASSIGNMENT (( #493 ) ) ;
+#820 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -5.758911772744590400, -58.07676391684292100 ) ) ;
+#821 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 1.959365083918120100E-016 ) ) ;
+#822 = EDGE_CURVE ( 'NONE', #170, #333, #283, .T. ) ;
+#823 = DIRECTION ( 'NONE',  ( 9.237932196098911400E-014, -0.2965404220490143700, -0.9550203024496349800 ) ) ;
+#824 = AXIS2_PLACEMENT_3D ( 'NONE', #317, #337, #329 ) ;
+#825 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#826 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Mag_Release_Right_V0.2A', ( #524, #289 ), #830 ) ;
+#827 = VERTEX_POINT ( 'NONE', #667 ) ;
+#828 = CARTESIAN_POINT ( 'NONE',  ( 4.999999999999996400, 6.148744396892299200, -74.48309681854583200 ) ) ;
+#829 = EDGE_CURVE ( 'NONE', #376, #211, #318, .T. ) ;
+#830 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #813 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #144, #129, #136 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#831 = CARTESIAN_POINT ( 'NONE',  ( -8.182225501296203500, -1.851629225211703900, -53.36767462975518600 ) ) ;
+#832 = CARTESIAN_POINT ( 'NONE',  ( -13.43342383045584200, -0.3520028473156912600, -62.78585320393066400 ) ) ;
+#833 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#834 = ORIENTED_EDGE ( 'NONE', *, *, #790, .F. ) ;
+#835 = CARTESIAN_POINT ( 'NONE',  ( -5.688060255819205900, -2.137817232117876100, -62.78585320393066400 ) ) ;
+#836 = ORIENTED_EDGE ( 'NONE', *, *, #685, .F. ) ;
+#837 = EDGE_LOOP ( 'NONE', ( #201, #459, #142, #224 ) ) ;
+#838 = EDGE_LOOP ( 'NONE', ( #225 ) ) ;
+#839 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#840 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#841 = AXIS2_PLACEMENT_3D ( 'NONE', #264, #313, #315 ) ;
+#842 = ORIENTED_EDGE ( 'NONE', *, *, #801, .T. ) ;
+#843 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#844 = VERTEX_POINT ( 'NONE', #682 ) ;
+#845 = EDGE_CURVE ( 'NONE', #308, #598, #14, .T. ) ;
+#846 = FACE_OUTER_BOUND ( 'NONE', #80, .T. ) ;
+#847 = EDGE_LOOP ( 'NONE', ( #166, #373, #366, #407 ) ) ;
+#848 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #494, 'distance_accuracy_value', 'NONE');
+#849 = CYLINDRICAL_SURFACE ( 'NONE', #92, 7.999999999999992900 ) ;
+#850 = PLANE ( 'NONE',  #189 ) ;
+#851 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#852 = CARTESIAN_POINT ( 'NONE',  ( -5.266604947012816700, -4.878979508140105300, -56.92733778625181200 ) ) ;
+#853 = CARTESIAN_POINT ( 'NONE',  ( -4.299443989504596600, -5.649956273029265400, -54.96193163866375600 ) ) ;
+#854 = EDGE_CURVE ( 'NONE', #216, #112, #351, .T. ) ;
+#855 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#856 = AXIS2_PLACEMENT_3D ( 'NONE', #245, #267, #281 ) ;
+#857 = EDGE_CURVE ( 'NONE', #444, #444, #325, .T. ) ;
+#858 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.851629225211754100, -51.09585114745916500 ) ) ;
+#859 = LINE ( 'NONE', #687, #520 ) ;
+#860 = AXIS2_PLACEMENT_3D ( 'NONE', #191, #248, #249 ) ;
+#861 = FACE_OUTER_BOUND ( 'NONE', #651, .T. ) ;
+#862 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #848 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #494, #569, #300 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#863 = PLANE ( 'NONE',  #204 ) ;
+#864 = VERTEX_POINT ( 'NONE', #835 ) ;
+#865 = VECTOR ( 'NONE', #773, 1000.000000000000100 ) ;
+#866 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -1.175609751745653400E-015 ) ) ;
+#867 = ORIENTED_EDGE ( 'NONE', *, *, #870, .T. ) ;
+#868 = CARTESIAN_POINT ( 'NONE',  ( 6.231290628910491200, 6.148370774788302700, -1.098744662512760200 ) ) ;
+#869 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#870 = EDGE_CURVE ( 'NONE', #180, #279, #416, .T. ) ;
+#871 = EDGE_CURVE ( 'NONE', #606, #180, #348, .T. ) ;
+#872 = ORIENTED_EDGE ( 'NONE', *, *, #594, .F. ) ;
+#873 = ORIENTED_EDGE ( 'NONE', *, *, #177, .F. ) ;
+#874 = CARTESIAN_POINT ( 'NONE',  ( 7.000000000000000000, -1.852002847315700200, -2.403236016389590300E-016 ) ) ;
+#875 = VECTOR ( 'NONE', #468, 1000.000000000000000 ) ;
+#876 = LINE ( 'NONE', #518, #643 ) ;
+#877 = EDGE_LOOP ( 'NONE', ( #638 ) ) ;
+#878 = CIRCLE ( 'NONE', #121, 4.000000000000004400 ) ;
+#879 = CARTESIAN_POINT ( 'NONE',  ( 3.499999999968313800, 6.148370774788309000, -41.24896774453872400 ) ) ;
+#880 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.175609751745653400E-015, -1.000000000000000000 ) ) ;
+#881 = AXIS2_PLACEMENT_3D ( 'NONE', #198, #227, #230 ) ;
+#882 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#883 = CARTESIAN_POINT ( 'NONE',  ( -6.252419349247114500, -5.290200270331650900, -62.78585320393066400 ) ) ;
+#884 = EDGE_LOOP ( 'NONE', ( #510, #600, #602 ) ) ;
+#885 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.851629225211754100, -51.09585114745916500 ) ) ;
+#886 = EDGE_CURVE ( 'NONE', #803, #374, #420, .T. ) ;
+#887 = VECTOR ( 'NONE', #91, 1000.000000000000000 ) ;
+#888 = CARTESIAN_POINT ( 'NONE',  ( 3.500000000000000000, -1.852002847315691800, -65.05788579290296500 ) ) ;
+#889 = EDGE_LOOP ( 'NONE', ( #587, #340, #680, #534, #332 ) ) ;
+#890 = EDGE_CURVE ( 'NONE', #54, #211, #368, .T. ) ;
+#891 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -9.148888984942267700, -37.67825353023624000 ) ) ;
+#892 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -62.78585320393066400 ) ) ;
+#893 = VECTOR ( 'NONE', #789, 1000.000000000000000 ) ;
+#894 = ORIENTED_EDGE ( 'NONE', *, *, #153, .F. ) ;
+#895 = CARTESIAN_POINT ( 'NONE',  ( -7.888126105403681100, -0.3520028473156938700, -1.390889459613495100 ) ) ;
+#896 = EDGE_CURVE ( 'NONE', #238, #152, #399, .T. ) ;
+#897 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#898 = ORIENTED_EDGE ( 'NONE', *, *, #588, .T. ) ;
+#899 = CARTESIAN_POINT ( 'NONE',  ( 4.996788532958201600, 6.148744395231651600, -74.46487159547955100 ) ) ;
+#900 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.959362523977463200E-016, 1.000000000000000000 ) ) ;
+#901 = CARTESIAN_POINT ( 'NONE',  ( -5.839391835568509500, -3.260256878763946100, -62.78585320393066400 ) ) ;
+#902 = EDGE_CURVE ( 'NONE', #254, #279, #859, .T. ) ;
+#903 = PLANE ( 'NONE',  #589 ) ;
+#904 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #119, #123 ) ;
+#905 = ORIENTED_EDGE ( 'NONE', *, *, #274, .T. ) ;
+#906 = VERTEX_POINT ( 'NONE', #26 ) ;
+#907 = PLANE ( 'NONE',  #42 ) ;
+#908 = VECTOR ( 'NONE', #439, 1000.000000000000100 ) ;
+#909 = PLANE ( 'NONE',  #334 ) ;
+#910 = VECTOR ( 'NONE', #654, 1000.000000000000100 ) ;
+#911 = ORIENTED_EDGE ( 'NONE', *, *, #74, .F. ) ;
+#912 = LINE ( 'NONE', #181, #910 ) ;
+#913 = CIRCLE ( 'NONE', #269, 7.999999999999992900 ) ;
+#914 = CARTESIAN_POINT ( 'NONE',  ( -1.692616281353881900, -7.205897391135844800, -47.98303851595648000 ) ) ;
+#915 = ORIENTED_EDGE ( 'NONE', *, *, #890, .T. ) ;
+#916 = EDGE_CURVE ( 'NONE', #386, #89, #521, .T. ) ;
+#917 = AXIS2_PLACEMENT_3D ( 'NONE', #4, #22, #38 ) ;
+#918 = CARTESIAN_POINT ( 'NONE',  ( 4.336808689942017700E-016, -1.851629225161917300, -36.43814991900629300 ) ) ;
+#919 = LINE ( 'NONE', #853, #925 ) ;
+#920 = CIRCLE ( 'NONE', #46, 4.999999999999997300 ) ;
+#921 = CARTESIAN_POINT ( 'NONE',  ( -3.851134893175401700, -0.3520028473156934200, -55.79391731527578500 ) ) ;
+#922 = DIRECTION ( 'NONE',  ( -0.4999999999999189500, -0.2568115387425488600, -0.8270718430515969800 ) ) ;
+#923 = ORIENTED_EDGE ( 'NONE', *, *, #175, .F. ) ;
+#924 = ORIENTED_EDGE ( 'NONE', *, *, #58, .F. ) ;
+#925 = VECTOR ( 'NONE', #250, 1000.000000000000000 ) ;
+#926 = CARTESIAN_POINT ( 'NONE',  ( -5.280002406633121500, -8.899971286204277000, -55.73114688225975000 ) ) ;
+#927 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #131 ) ;
+#928 = DIRECTION ( 'NONE',  ( 0.8064616450872454900, 0.5646905231670896800, -0.1753403206580061400 ) ) ;
+#929 = VECTOR ( 'NONE', #194, 1000.000000000000100 ) ;
+#930 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#931 = ORIENTED_EDGE ( 'NONE', *, *, #100, .F. ) ;
+#932 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#933 = EDGE_CURVE ( 'NONE', #139, #35, #428, .T. ) ;
+#934 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#935 = VERTEX_POINT ( 'NONE', #679 ) ;
+#936 = LINE ( 'NONE', #209, #130 ) ;
+#937 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#938 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #476 ) ) ;
+ENDSEC;
+END-ISO-10303-21;

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/mp-1_bolt.step

@@ -0,0 +1,980 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('FreeCAD Model'),'2;1');
+FILE_NAME(
+  'C:/Users/Darren/Desktop/shuty mp1 final/mp-1 step/mp-1 bolt.step',
+  '2016-02-20T18:12:08',('Author'),(''),
+  'Open CASCADE STEP processor 6.8','FreeCAD','Unknown');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }'));
+ENDSEC;
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft',
+  'automotive_design',1997,#2);
+#2 = APPLICATION_CONTEXT(
+  'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('Pocket004','Pocket004','',(#8));
+#8 = MECHANICAL_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#782);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#13 = DIRECTION('',(0.E+000,0.E+000,1.));
+#14 = DIRECTION('',(1.,0.E+000,-0.E+000));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#200,#331,#378,#437,#488,#607,#632,#639,#698,
+    #725,#775));
+#17 = ADVANCED_FACE('',(#18),#33,.T.);
+#18 = FACE_BOUND('',#19,.F.);
+#19 = EDGE_LOOP('',(#20,#60,#88,#121,#147,#176));
+#20 = ORIENTED_EDGE('',*,*,#21,.F.);
+#21 = EDGE_CURVE('',#22,#24,#26,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(21.95,0.E+000,0.E+000));
+#24 = VERTEX_POINT('',#25);
+#25 = CARTESIAN_POINT('',(-21.80137610335,-2.55,0.E+000));
+#26 = SURFACE_CURVE('',#27,(#32,#44),.PCURVE_S1.);
+#27 = CIRCLE('',#28,21.95);
+#28 = AXIS2_PLACEMENT_3D('',#29,#30,#31);
+#29 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#30 = DIRECTION('',(0.E+000,0.E+000,1.));
+#31 = DIRECTION('',(1.,0.E+000,0.E+000));
+#32 = PCURVE('',#33,#38);
+#33 = CYLINDRICAL_SURFACE('',#34,21.95);
+#34 = AXIS2_PLACEMENT_3D('',#35,#36,#37);
+#35 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#36 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#37 = DIRECTION('',(1.,0.E+000,0.E+000));
+#38 = DEFINITIONAL_REPRESENTATION('',(#39),#43);
+#39 = LINE('',#40,#41);
+#40 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#41 = VECTOR('',#42,1.);
+#42 = DIRECTION('',(-1.,0.E+000));
+#43 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#44 = PCURVE('',#45,#50);
+#45 = PLANE('',#46);
+#46 = AXIS2_PLACEMENT_3D('',#47,#48,#49);
+#47 = CARTESIAN_POINT('',(21.95,0.E+000,0.E+000));
+#48 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#49 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#50 = DEFINITIONAL_REPRESENTATION('',(#51),#59);
+#51 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#52,#53,#54,#55,#56,#57,#58),
+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#52 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#53 = CARTESIAN_POINT('',(0.E+000,38.018515226137));
+#54 = CARTESIAN_POINT('',(32.925,19.009257613068));
+#55 = CARTESIAN_POINT('',(65.85,5.376199448257E-015));
+#56 = CARTESIAN_POINT('',(32.925,-19.00925761306));
+#57 = CARTESIAN_POINT('',(3.552713678801E-014,-38.01851522613));
+#58 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#59 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#60 = ORIENTED_EDGE('',*,*,#61,.T.);
+#61 = EDGE_CURVE('',#22,#62,#64,.T.);
+#62 = VERTEX_POINT('',#63);
+#63 = CARTESIAN_POINT('',(21.95,0.E+000,56.));
+#64 = SURFACE_CURVE('',#65,(#69,#76),.PCURVE_S1.);
+#65 = LINE('',#66,#67);
+#66 = CARTESIAN_POINT('',(21.95,0.E+000,0.E+000));
+#67 = VECTOR('',#68,1.);
+#68 = DIRECTION('',(0.E+000,0.E+000,1.));
+#69 = PCURVE('',#33,#70);
+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);
+#71 = LINE('',#72,#73);
+#72 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#73 = VECTOR('',#74,1.);
+#74 = DIRECTION('',(-0.E+000,-1.));
+#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#76 = PCURVE('',#77,#82);
+#77 = CYLINDRICAL_SURFACE('',#78,21.95);
+#78 = AXIS2_PLACEMENT_3D('',#79,#80,#81);
+#79 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#80 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#81 = DIRECTION('',(1.,0.E+000,0.E+000));
+#82 = DEFINITIONAL_REPRESENTATION('',(#83),#87);
+#83 = LINE('',#84,#85);
+#84 = CARTESIAN_POINT('',(-6.28318530718,0.E+000));
+#85 = VECTOR('',#86,1.);
+#86 = DIRECTION('',(-0.E+000,-1.));
+#87 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#88 = ORIENTED_EDGE('',*,*,#89,.T.);
+#89 = EDGE_CURVE('',#62,#90,#92,.T.);
+#90 = VERTEX_POINT('',#91);
+#91 = CARTESIAN_POINT('',(6.4,-20.99624966511,56.));
+#92 = SURFACE_CURVE('',#93,(#98,#105),.PCURVE_S1.);
+#93 = CIRCLE('',#94,21.95);
+#94 = AXIS2_PLACEMENT_3D('',#95,#96,#97);
+#95 = CARTESIAN_POINT('',(0.E+000,0.E+000,56.));
+#96 = DIRECTION('',(0.E+000,0.E+000,1.));
+#97 = DIRECTION('',(1.,0.E+000,0.E+000));
+#98 = PCURVE('',#33,#99);
+#99 = DEFINITIONAL_REPRESENTATION('',(#100),#104);
+#100 = LINE('',#101,#102);
+#101 = CARTESIAN_POINT('',(-0.E+000,-56.));
+#102 = VECTOR('',#103,1.);
+#103 = DIRECTION('',(-1.,0.E+000));
+#104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#105 = PCURVE('',#106,#111);
+#106 = PLANE('',#107);
+#107 = AXIS2_PLACEMENT_3D('',#108,#109,#110);
+#108 = CARTESIAN_POINT('',(21.95,0.E+000,56.));
+#109 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#110 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#111 = DEFINITIONAL_REPRESENTATION('',(#112),#120);
+#112 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#113,#114,#115,#116,#117,#118
+,#119),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#113 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#114 = CARTESIAN_POINT('',(0.E+000,38.018515226137));
+#115 = CARTESIAN_POINT('',(32.925,19.009257613068));
+#116 = CARTESIAN_POINT('',(65.85,5.376199448257E-015));
+#117 = CARTESIAN_POINT('',(32.925,-19.00925761306));
+#118 = CARTESIAN_POINT('',(3.552713678801E-014,-38.01851522613));
+#119 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#121 = ORIENTED_EDGE('',*,*,#122,.T.);
+#122 = EDGE_CURVE('',#90,#123,#125,.T.);
+#123 = VERTEX_POINT('',#124);
+#124 = CARTESIAN_POINT('',(6.4,-20.99624966511,5.3));
+#125 = SURFACE_CURVE('',#126,(#130,#136),.PCURVE_S1.);
+#126 = LINE('',#127,#128);
+#127 = CARTESIAN_POINT('',(6.4,-20.99624966511,0.E+000));
+#128 = VECTOR('',#129,1.);
+#129 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#130 = PCURVE('',#33,#131);
+#131 = DEFINITIONAL_REPRESENTATION('',(#132),#135);
+#132 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#133,#134),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#133 = CARTESIAN_POINT('',(-5.008258558174,-56.0000004));
+#134 = CARTESIAN_POINT('',(-5.008258558174,4.E-007));
+#135 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#136 = PCURVE('',#137,#142);
+#137 = PLANE('',#138);
+#138 = AXIS2_PLACEMENT_3D('',#139,#140,#141);
+#139 = CARTESIAN_POINT('',(6.4,-23.496647,56.));
+#140 = DIRECTION('',(1.,0.E+000,0.E+000));
+#141 = DIRECTION('',(0.E+000,1.,0.E+000));
+#142 = DEFINITIONAL_REPRESENTATION('',(#143),#146);
+#143 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#144,#145),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#144 = CARTESIAN_POINT('',(2.500397334881,3.99999997569E-007));
+#145 = CARTESIAN_POINT('',(2.500397334881,-56.0000004));
+#146 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#147 = ORIENTED_EDGE('',*,*,#148,.T.);
+#148 = EDGE_CURVE('',#123,#149,#151,.T.);
+#149 = VERTEX_POINT('',#150);
+#150 = CARTESIAN_POINT('',(-21.80137610335,-2.55,5.3));
+#151 = SURFACE_CURVE('',#152,(#157,#164),.PCURVE_S1.);
+#152 = CIRCLE('',#153,21.95);
+#153 = AXIS2_PLACEMENT_3D('',#154,#155,#156);
+#154 = CARTESIAN_POINT('',(0.E+000,0.E+000,5.3));
+#155 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#156 = DIRECTION('',(1.,0.E+000,0.E+000));
+#157 = PCURVE('',#33,#158);
+#158 = DEFINITIONAL_REPRESENTATION('',(#159),#163);
+#159 = LINE('',#160,#161);
+#160 = CARTESIAN_POINT('',(-6.28318530718,-5.3));
+#161 = VECTOR('',#162,1.);
+#162 = DIRECTION('',(1.,-0.E+000));
+#163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#164 = PCURVE('',#165,#170);
+#165 = PLANE('',#166);
+#166 = AXIS2_PLACEMENT_3D('',#167,#168,#169);
+#167 = CARTESIAN_POINT('',(-35.054455,-23.242626,5.3));
+#168 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#169 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#170 = DEFINITIONAL_REPRESENTATION('',(#171),#175);
+#171 = CIRCLE('',#172,21.95);
+#172 = AXIS2_PLACEMENT_2D('',#173,#174);
+#173 = CARTESIAN_POINT('',(-35.054455,23.242626));
+#174 = DIRECTION('',(-1.,0.E+000));
+#175 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#176 = ORIENTED_EDGE('',*,*,#177,.T.);
+#177 = EDGE_CURVE('',#149,#24,#178,.T.);
+#178 = SURFACE_CURVE('',#179,(#183,#189),.PCURVE_S1.);
+#179 = LINE('',#180,#181);
+#180 = CARTESIAN_POINT('',(-21.80137610335,-2.55,0.E+000));
+#181 = VECTOR('',#182,1.);
+#182 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#183 = PCURVE('',#33,#184);
+#184 = DEFINITIONAL_REPRESENTATION('',(#185),#188);
+#185 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#186,#187),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-5.83,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#186 = CARTESIAN_POINT('',(-3.258028690061,-5.83));
+#187 = CARTESIAN_POINT('',(-3.258028690061,4.E-007));
+#188 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#189 = PCURVE('',#190,#195);
+#190 = PLANE('',#191);
+#191 = AXIS2_PLACEMENT_3D('',#192,#193,#194);
+#192 = CARTESIAN_POINT('',(34.292408,-2.55,0.E+000));
+#193 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#194 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#195 = DEFINITIONAL_REPRESENTATION('',(#196),#199);
+#196 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#197,#198),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-5.83,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#197 = CARTESIAN_POINT('',(56.093784103356,-5.83));
+#198 = CARTESIAN_POINT('',(56.093784103356,4.E-007));
+#199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#200 = ADVANCED_FACE('',(#201,#300),#45,.T.);
+#201 = FACE_BOUND('',#202,.T.);
+#202 = EDGE_LOOP('',(#203,#204,#232,#258,#279));
+#203 = ORIENTED_EDGE('',*,*,#21,.F.);
+#204 = ORIENTED_EDGE('',*,*,#205,.F.);
+#205 = EDGE_CURVE('',#206,#22,#208,.T.);
+#206 = VERTEX_POINT('',#207);
+#207 = CARTESIAN_POINT('',(21.902054698133,-1.45,0.E+000));
+#208 = SURFACE_CURVE('',#209,(#214,#225),.PCURVE_S1.);
+#209 = CIRCLE('',#210,21.95);
+#210 = AXIS2_PLACEMENT_3D('',#211,#212,#213);
+#211 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#212 = DIRECTION('',(0.E+000,0.E+000,1.));
+#213 = DIRECTION('',(1.,0.E+000,0.E+000));
+#214 = PCURVE('',#45,#215);
+#215 = DEFINITIONAL_REPRESENTATION('',(#216),#224);
+#216 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#217,#218,#219,#220,#221,#222
+,#223),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#217 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#218 = CARTESIAN_POINT('',(0.E+000,38.018515226137));
+#219 = CARTESIAN_POINT('',(32.925,19.009257613068));
+#220 = CARTESIAN_POINT('',(65.85,5.376199448257E-015));
+#221 = CARTESIAN_POINT('',(32.925,-19.00925761306));
+#222 = CARTESIAN_POINT('',(3.552713678801E-014,-38.01851522613));
+#223 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#224 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#225 = PCURVE('',#77,#226);
+#226 = DEFINITIONAL_REPRESENTATION('',(#227),#231);
+#227 = LINE('',#228,#229);
+#228 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#229 = VECTOR('',#230,1.);
+#230 = DIRECTION('',(-1.,0.E+000));
+#231 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#232 = ORIENTED_EDGE('',*,*,#233,.T.);
+#233 = EDGE_CURVE('',#206,#234,#236,.T.);
+#234 = VERTEX_POINT('',#235);
+#235 = CARTESIAN_POINT('',(6.4,-1.45,0.E+000));
+#236 = SURFACE_CURVE('',#237,(#241,#247),.PCURVE_S1.);
+#237 = LINE('',#238,#239);
+#238 = CARTESIAN_POINT('',(14.175,-1.45,0.E+000));
+#239 = VECTOR('',#240,1.);
+#240 = DIRECTION('',(-1.,-0.E+000,-0.E+000));
+#241 = PCURVE('',#45,#242);
+#242 = DEFINITIONAL_REPRESENTATION('',(#243),#246);
+#243 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#244,#245),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-12.165,10.4118303),.PIECEWISE_BEZIER_KNOTS.);
+#244 = CARTESIAN_POINT('',(-4.39,-1.45));
+#245 = CARTESIAN_POINT('',(18.1868303,-1.45));
+#246 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#247 = PCURVE('',#248,#253);
+#248 = PLANE('',#249);
+#249 = AXIS2_PLACEMENT_3D('',#250,#251,#252);
+#250 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#251 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#252 = DIRECTION('',(1.,0.E+000,0.E+000));
+#253 = DEFINITIONAL_REPRESENTATION('',(#254),#257);
+#254 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#255,#256),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-12.165,10.4118303),.PIECEWISE_BEZIER_KNOTS.);
+#255 = CARTESIAN_POINT('',(19.94,-56.));
+#256 = CARTESIAN_POINT('',(-2.6368303,-56.));
+#257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#258 = ORIENTED_EDGE('',*,*,#259,.T.);
+#259 = EDGE_CURVE('',#234,#260,#262,.T.);
+#260 = VERTEX_POINT('',#261);
+#261 = CARTESIAN_POINT('',(6.4,-2.55,0.E+000));
+#262 = SURFACE_CURVE('',#263,(#267,#273),.PCURVE_S1.);
+#263 = LINE('',#264,#265);
+#264 = CARTESIAN_POINT('',(6.4,-11.7483235,0.E+000));
+#265 = VECTOR('',#266,1.);
+#266 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#267 = PCURVE('',#45,#268);
+#268 = DEFINITIONAL_REPRESENTATION('',(#269),#272);
+#269 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#270,#271),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-12.5029882,13.9529882),.PIECEWISE_BEZIER_KNOTS.);
+#270 = CARTESIAN_POINT('',(15.55,0.7546647));
+#271 = CARTESIAN_POINT('',(15.55,-25.7013117));
+#272 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#273 = PCURVE('',#137,#274);
+#274 = DEFINITIONAL_REPRESENTATION('',(#275),#278);
+#275 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#276,#277),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-12.5029882,13.9529882),.PIECEWISE_BEZIER_KNOTS.);
+#276 = CARTESIAN_POINT('',(24.2513117,-56.));
+#277 = CARTESIAN_POINT('',(-2.2046647,-56.));
+#278 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#279 = ORIENTED_EDGE('',*,*,#280,.T.);
+#280 = EDGE_CURVE('',#260,#24,#281,.T.);
+#281 = SURFACE_CURVE('',#282,(#286,#293),.PCURVE_S1.);
+#282 = LINE('',#283,#284);
+#283 = CARTESIAN_POINT('',(34.292408,-2.55,0.E+000));
+#284 = VECTOR('',#285,1.);
+#285 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#286 = PCURVE('',#45,#287);
+#287 = DEFINITIONAL_REPRESENTATION('',(#288),#292);
+#288 = LINE('',#289,#290);
+#289 = CARTESIAN_POINT('',(-12.342408,-2.55));
+#290 = VECTOR('',#291,1.);
+#291 = DIRECTION('',(1.,0.E+000));
+#292 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#293 = PCURVE('',#190,#294);
+#294 = DEFINITIONAL_REPRESENTATION('',(#295),#299);
+#295 = LINE('',#296,#297);
+#296 = CARTESIAN_POINT('',(0.E+000,-0.E+000));
+#297 = VECTOR('',#298,1.);
+#298 = DIRECTION('',(1.,0.E+000));
+#299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#300 = FACE_BOUND('',#301,.T.);
+#301 = EDGE_LOOP('',(#302));
+#302 = ORIENTED_EDGE('',*,*,#303,.F.);
+#303 = EDGE_CURVE('',#304,#304,#306,.T.);
+#304 = VERTEX_POINT('',#305);
+#305 = CARTESIAN_POINT('',(6.375,12.65,0.E+000));
+#306 = SURFACE_CURVE('',#307,(#312,#319),.PCURVE_S1.);
+#307 = CIRCLE('',#308,6.375);
+#308 = AXIS2_PLACEMENT_3D('',#309,#310,#311);
+#309 = CARTESIAN_POINT('',(0.E+000,12.65,0.E+000));
+#310 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#311 = DIRECTION('',(1.,0.E+000,0.E+000));
+#312 = PCURVE('',#45,#313);
+#313 = DEFINITIONAL_REPRESENTATION('',(#314),#318);
+#314 = CIRCLE('',#315,6.375);
+#315 = AXIS2_PLACEMENT_2D('',#316,#317);
+#316 = CARTESIAN_POINT('',(21.95,12.65));
+#317 = DIRECTION('',(-1.,0.E+000));
+#318 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#319 = PCURVE('',#320,#325);
+#320 = CYLINDRICAL_SURFACE('',#321,6.375);
+#321 = AXIS2_PLACEMENT_3D('',#322,#323,#324);
+#322 = CARTESIAN_POINT('',(0.E+000,12.65,0.E+000));
+#323 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#324 = DIRECTION('',(1.,0.E+000,0.E+000));
+#325 = DEFINITIONAL_REPRESENTATION('',(#326),#330);
+#326 = LINE('',#327,#328);
+#327 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#328 = VECTOR('',#329,1.);
+#329 = DIRECTION('',(1.,0.E+000));
+#330 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#331 = ADVANCED_FACE('',(#332),#190,.T.);
+#332 = FACE_BOUND('',#333,.T.);
+#333 = EDGE_LOOP('',(#334,#335,#356,#377));
+#334 = ORIENTED_EDGE('',*,*,#280,.F.);
+#335 = ORIENTED_EDGE('',*,*,#336,.F.);
+#336 = EDGE_CURVE('',#337,#260,#339,.T.);
+#337 = VERTEX_POINT('',#338);
+#338 = CARTESIAN_POINT('',(6.4,-2.55,5.3));
+#339 = SURFACE_CURVE('',#340,(#344,#350),.PCURVE_S1.);
+#340 = LINE('',#341,#342);
+#341 = CARTESIAN_POINT('',(6.4,-2.55,28.));
+#342 = VECTOR('',#343,1.);
+#343 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#344 = PCURVE('',#190,#345);
+#345 = DEFINITIONAL_REPRESENTATION('',(#346),#349);
+#346 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#347,#348),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(22.17,28.53),.PIECEWISE_BEZIER_KNOTS.);
+#347 = CARTESIAN_POINT('',(27.892408,-5.83));
+#348 = CARTESIAN_POINT('',(27.892408,0.53));
+#349 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#350 = PCURVE('',#137,#351);
+#351 = DEFINITIONAL_REPRESENTATION('',(#352),#355);
+#352 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#353,#354),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(22.17,28.53),.PIECEWISE_BEZIER_KNOTS.);
+#353 = CARTESIAN_POINT('',(20.946647,-50.17));
+#354 = CARTESIAN_POINT('',(20.946647,-56.53));
+#355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#356 = ORIENTED_EDGE('',*,*,#357,.T.);
+#357 = EDGE_CURVE('',#337,#149,#358,.T.);
+#358 = SURFACE_CURVE('',#359,(#363,#370),.PCURVE_S1.);
+#359 = LINE('',#360,#361);
+#360 = CARTESIAN_POINT('',(34.292408,-2.55,5.3));
+#361 = VECTOR('',#362,1.);
+#362 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#363 = PCURVE('',#190,#364);
+#364 = DEFINITIONAL_REPRESENTATION('',(#365),#369);
+#365 = LINE('',#366,#367);
+#366 = CARTESIAN_POINT('',(0.E+000,-5.3));
+#367 = VECTOR('',#368,1.);
+#368 = DIRECTION('',(1.,0.E+000));
+#369 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#370 = PCURVE('',#165,#371);
+#371 = DEFINITIONAL_REPRESENTATION('',(#372),#376);
+#372 = LINE('',#373,#374);
+#373 = CARTESIAN_POINT('',(-69.346863,20.692626));
+#374 = VECTOR('',#375,1.);
+#375 = DIRECTION('',(1.,0.E+000));
+#376 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#377 = ORIENTED_EDGE('',*,*,#177,.T.);
+#378 = ADVANCED_FACE('',(#379,#402),#165,.T.);
+#379 = FACE_BOUND('',#380,.T.);
+#380 = EDGE_LOOP('',(#381,#382,#383));
+#381 = ORIENTED_EDGE('',*,*,#148,.T.);
+#382 = ORIENTED_EDGE('',*,*,#357,.F.);
+#383 = ORIENTED_EDGE('',*,*,#384,.F.);
+#384 = EDGE_CURVE('',#123,#337,#385,.T.);
+#385 = SURFACE_CURVE('',#386,(#390,#396),.PCURVE_S1.);
+#386 = LINE('',#387,#388);
+#387 = CARTESIAN_POINT('',(6.4,-23.3696365,5.3));
+#388 = VECTOR('',#389,1.);
+#389 = DIRECTION('',(0.E+000,1.,0.E+000));
+#390 = PCURVE('',#165,#391);
+#391 = DEFINITIONAL_REPRESENTATION('',(#392),#395);
+#392 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#393,#394),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(0.418761868369,22.8888991),.PIECEWISE_BEZIER_KNOTS.);
+#393 = CARTESIAN_POINT('',(-41.454455,0.291751368369));
+#394 = CARTESIAN_POINT('',(-41.454455,22.7618886));
+#395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#396 = PCURVE('',#137,#397);
+#397 = DEFINITIONAL_REPRESENTATION('',(#398),#401);
+#398 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#399,#400),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(0.418761868369,22.8888991),.PIECEWISE_BEZIER_KNOTS.);
+#399 = CARTESIAN_POINT('',(0.545772368369,-50.7));
+#400 = CARTESIAN_POINT('',(23.0159096,-50.7));
+#401 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#402 = FACE_BOUND('',#403,.T.);
+#403 = EDGE_LOOP('',(#404));
+#404 = ORIENTED_EDGE('',*,*,#405,.T.);
+#405 = EDGE_CURVE('',#406,#406,#408,.T.);
+#406 = VERTEX_POINT('',#407);
+#407 = CARTESIAN_POINT('',(1.75,-16.7,5.3));
+#408 = SURFACE_CURVE('',#409,(#414,#425),.PCURVE_S1.);
+#409 = CIRCLE('',#410,1.75);
+#410 = AXIS2_PLACEMENT_3D('',#411,#412,#413);
+#411 = CARTESIAN_POINT('',(0.E+000,-16.7,5.3));
+#412 = DIRECTION('',(0.E+000,0.E+000,1.));
+#413 = DIRECTION('',(1.,0.E+000,0.E+000));
+#414 = PCURVE('',#165,#415);
+#415 = DEFINITIONAL_REPRESENTATION('',(#416),#424);
+#416 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#417,#418,#419,#420,#421,#422
+,#423),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#417 = CARTESIAN_POINT('',(-36.804455,6.542626));
+#418 = CARTESIAN_POINT('',(-36.804455,9.573714913246));
+#419 = CARTESIAN_POINT('',(-34.179455,8.058170456623));
+#420 = CARTESIAN_POINT('',(-31.554455,6.542626));
+#421 = CARTESIAN_POINT('',(-34.179455,5.027081543377));
+#422 = CARTESIAN_POINT('',(-36.804455,3.511537086754));
+#423 = CARTESIAN_POINT('',(-36.804455,6.542626));
+#424 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#425 = PCURVE('',#426,#431);
+#426 = CYLINDRICAL_SURFACE('',#427,1.75);
+#427 = AXIS2_PLACEMENT_3D('',#428,#429,#430);
+#428 = CARTESIAN_POINT('',(0.E+000,-16.7,56.));
+#429 = DIRECTION('',(0.E+000,0.E+000,1.));
+#430 = DIRECTION('',(1.,0.E+000,0.E+000));
+#431 = DEFINITIONAL_REPRESENTATION('',(#432),#436);
+#432 = LINE('',#433,#434);
+#433 = CARTESIAN_POINT('',(0.E+000,-50.7));
+#434 = VECTOR('',#435,1.);
+#435 = DIRECTION('',(1.,0.E+000));
+#436 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#437 = ADVANCED_FACE('',(#438),#137,.T.);
+#438 = FACE_BOUND('',#439,.T.);
+#439 = EDGE_LOOP('',(#440,#463,#464,#465,#466,#467));
+#440 = ORIENTED_EDGE('',*,*,#441,.F.);
+#441 = EDGE_CURVE('',#90,#442,#444,.T.);
+#442 = VERTEX_POINT('',#443);
+#443 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#444 = SURFACE_CURVE('',#445,(#449,#456),.PCURVE_S1.);
+#445 = LINE('',#446,#447);
+#446 = CARTESIAN_POINT('',(6.4,-23.496647,56.));
+#447 = VECTOR('',#448,1.);
+#448 = DIRECTION('',(0.E+000,1.,0.E+000));
+#449 = PCURVE('',#137,#450);
+#450 = DEFINITIONAL_REPRESENTATION('',(#451),#455);
+#451 = LINE('',#452,#453);
+#452 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#453 = VECTOR('',#454,1.);
+#454 = DIRECTION('',(1.,0.E+000));
+#455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#456 = PCURVE('',#106,#457);
+#457 = DEFINITIONAL_REPRESENTATION('',(#458),#462);
+#458 = LINE('',#459,#460);
+#459 = CARTESIAN_POINT('',(15.55,-23.496647));
+#460 = VECTOR('',#461,1.);
+#461 = DIRECTION('',(0.E+000,1.));
+#462 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#463 = ORIENTED_EDGE('',*,*,#122,.T.);
+#464 = ORIENTED_EDGE('',*,*,#384,.T.);
+#465 = ORIENTED_EDGE('',*,*,#336,.T.);
+#466 = ORIENTED_EDGE('',*,*,#259,.F.);
+#467 = ORIENTED_EDGE('',*,*,#468,.F.);
+#468 = EDGE_CURVE('',#442,#234,#469,.T.);
+#469 = SURFACE_CURVE('',#470,(#474,#481),.PCURVE_S1.);
+#470 = LINE('',#471,#472);
+#471 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#472 = VECTOR('',#473,1.);
+#473 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#474 = PCURVE('',#137,#475);
+#475 = DEFINITIONAL_REPRESENTATION('',(#476),#480);
+#476 = LINE('',#477,#478);
+#477 = CARTESIAN_POINT('',(22.046647,0.E+000));
+#478 = VECTOR('',#479,1.);
+#479 = DIRECTION('',(0.E+000,-1.));
+#480 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#481 = PCURVE('',#248,#482);
+#482 = DEFINITIONAL_REPRESENTATION('',(#483),#487);
+#483 = LINE('',#484,#485);
+#484 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#485 = VECTOR('',#486,1.);
+#486 = DIRECTION('',(0.E+000,-1.));
+#487 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#488 = ADVANCED_FACE('',(#489,#542,#572),#106,.F.);
+#489 = FACE_BOUND('',#490,.F.);
+#490 = EDGE_LOOP('',(#491,#492,#520,#541));
+#491 = ORIENTED_EDGE('',*,*,#89,.F.);
+#492 = ORIENTED_EDGE('',*,*,#493,.F.);
+#493 = EDGE_CURVE('',#494,#62,#496,.T.);
+#494 = VERTEX_POINT('',#495);
+#495 = CARTESIAN_POINT('',(21.902054698133,-1.45,56.));
+#496 = SURFACE_CURVE('',#497,(#502,#513),.PCURVE_S1.);
+#497 = CIRCLE('',#498,21.95);
+#498 = AXIS2_PLACEMENT_3D('',#499,#500,#501);
+#499 = CARTESIAN_POINT('',(0.E+000,0.E+000,56.));
+#500 = DIRECTION('',(0.E+000,0.E+000,1.));
+#501 = DIRECTION('',(1.,0.E+000,0.E+000));
+#502 = PCURVE('',#106,#503);
+#503 = DEFINITIONAL_REPRESENTATION('',(#504),#512);
+#504 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#505,#506,#507,#508,#509,#510
+,#511),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#505 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#506 = CARTESIAN_POINT('',(0.E+000,38.018515226137));
+#507 = CARTESIAN_POINT('',(32.925,19.009257613068));
+#508 = CARTESIAN_POINT('',(65.85,5.376199448257E-015));
+#509 = CARTESIAN_POINT('',(32.925,-19.00925761306));
+#510 = CARTESIAN_POINT('',(3.552713678801E-014,-38.01851522613));
+#511 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#512 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#513 = PCURVE('',#77,#514);
+#514 = DEFINITIONAL_REPRESENTATION('',(#515),#519);
+#515 = LINE('',#516,#517);
+#516 = CARTESIAN_POINT('',(-0.E+000,-56.));
+#517 = VECTOR('',#518,1.);
+#518 = DIRECTION('',(-1.,0.E+000));
+#519 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#520 = ORIENTED_EDGE('',*,*,#521,.F.);
+#521 = EDGE_CURVE('',#442,#494,#522,.T.);
+#522 = SURFACE_CURVE('',#523,(#527,#534),.PCURVE_S1.);
+#523 = LINE('',#524,#525);
+#524 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#525 = VECTOR('',#526,1.);
+#526 = DIRECTION('',(1.,0.E+000,0.E+000));
+#527 = PCURVE('',#106,#528);
+#528 = DEFINITIONAL_REPRESENTATION('',(#529),#533);
+#529 = LINE('',#530,#531);
+#530 = CARTESIAN_POINT('',(15.55,-1.45));
+#531 = VECTOR('',#532,1.);
+#532 = DIRECTION('',(-1.,0.E+000));
+#533 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#534 = PCURVE('',#248,#535);
+#535 = DEFINITIONAL_REPRESENTATION('',(#536),#540);
+#536 = LINE('',#537,#538);
+#537 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#538 = VECTOR('',#539,1.);
+#539 = DIRECTION('',(1.,0.E+000));
+#540 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#541 = ORIENTED_EDGE('',*,*,#441,.F.);
+#542 = FACE_BOUND('',#543,.F.);
+#543 = EDGE_LOOP('',(#544));
+#544 = ORIENTED_EDGE('',*,*,#545,.T.);
+#545 = EDGE_CURVE('',#546,#546,#548,.T.);
+#546 = VERTEX_POINT('',#547);
+#547 = CARTESIAN_POINT('',(1.75,-16.7,56.));
+#548 = SURFACE_CURVE('',#549,(#554,#565),.PCURVE_S1.);
+#549 = CIRCLE('',#550,1.75);
+#550 = AXIS2_PLACEMENT_3D('',#551,#552,#553);
+#551 = CARTESIAN_POINT('',(0.E+000,-16.7,56.));
+#552 = DIRECTION('',(0.E+000,0.E+000,1.));
+#553 = DIRECTION('',(1.,0.E+000,0.E+000));
+#554 = PCURVE('',#106,#555);
+#555 = DEFINITIONAL_REPRESENTATION('',(#556),#564);
+#556 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#557,#558,#559,#560,#561,#562
+,#563),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#557 = CARTESIAN_POINT('',(20.2,-16.7));
+#558 = CARTESIAN_POINT('',(20.2,-13.66891108675));
+#559 = CARTESIAN_POINT('',(22.825,-15.18445554337));
+#560 = CARTESIAN_POINT('',(25.45,-16.7));
+#561 = CARTESIAN_POINT('',(22.825,-18.21554445662));
+#562 = CARTESIAN_POINT('',(20.2,-19.73108891324));
+#563 = CARTESIAN_POINT('',(20.2,-16.7));
+#564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#565 = PCURVE('',#426,#566);
+#566 = DEFINITIONAL_REPRESENTATION('',(#567),#571);
+#567 = LINE('',#568,#569);
+#568 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#569 = VECTOR('',#570,1.);
+#570 = DIRECTION('',(1.,0.E+000));
+#571 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#572 = FACE_BOUND('',#573,.F.);
+#573 = EDGE_LOOP('',(#574));
+#574 = ORIENTED_EDGE('',*,*,#575,.T.);
+#575 = EDGE_CURVE('',#576,#576,#578,.T.);
+#576 = VERTEX_POINT('',#577);
+#577 = CARTESIAN_POINT('',(3.925,12.65,56.));
+#578 = SURFACE_CURVE('',#579,(#584,#595),.PCURVE_S1.);
+#579 = CIRCLE('',#580,3.925);
+#580 = AXIS2_PLACEMENT_3D('',#581,#582,#583);
+#581 = CARTESIAN_POINT('',(0.E+000,12.65,56.));
+#582 = DIRECTION('',(0.E+000,0.E+000,1.));
+#583 = DIRECTION('',(1.,0.E+000,0.E+000));
+#584 = PCURVE('',#106,#585);
+#585 = DEFINITIONAL_REPRESENTATION('',(#586),#594);
+#586 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#587,#588,#589,#590,#591,#592
+,#593),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#587 = CARTESIAN_POINT('',(18.025,12.65));
+#588 = CARTESIAN_POINT('',(18.025,19.448299419708));
+#589 = CARTESIAN_POINT('',(23.9125,16.049149709854));
+#590 = CARTESIAN_POINT('',(29.8,12.65));
+#591 = CARTESIAN_POINT('',(23.9125,9.250850290146));
+#592 = CARTESIAN_POINT('',(18.025,5.851700580292));
+#593 = CARTESIAN_POINT('',(18.025,12.65));
+#594 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#595 = PCURVE('',#596,#601);
+#596 = CYLINDRICAL_SURFACE('',#597,3.925);
+#597 = AXIS2_PLACEMENT_3D('',#598,#599,#600);
+#598 = CARTESIAN_POINT('',(0.E+000,12.65,56.));
+#599 = DIRECTION('',(0.E+000,0.E+000,1.));
+#600 = DIRECTION('',(1.,0.E+000,0.E+000));
+#601 = DEFINITIONAL_REPRESENTATION('',(#602),#606);
+#602 = LINE('',#603,#604);
+#603 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#604 = VECTOR('',#605,1.);
+#605 = DIRECTION('',(1.,0.E+000));
+#606 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#607 = ADVANCED_FACE('',(#608),#77,.T.);
+#608 = FACE_BOUND('',#609,.F.);
+#609 = EDGE_LOOP('',(#610,#611,#612,#631));
+#610 = ORIENTED_EDGE('',*,*,#61,.F.);
+#611 = ORIENTED_EDGE('',*,*,#205,.F.);
+#612 = ORIENTED_EDGE('',*,*,#613,.F.);
+#613 = EDGE_CURVE('',#494,#206,#614,.T.);
+#614 = SURFACE_CURVE('',#615,(#619,#625),.PCURVE_S1.);
+#615 = LINE('',#616,#617);
+#616 = CARTESIAN_POINT('',(21.902054698133,-1.45,0.E+000));
+#617 = VECTOR('',#618,1.);
+#618 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#619 = PCURVE('',#77,#620);
+#620 = DEFINITIONAL_REPRESENTATION('',(#621),#624);
+#621 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#622,#623),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#622 = CARTESIAN_POINT('',(-6.217077941965,-56.0000004));
+#623 = CARTESIAN_POINT('',(-6.217077941965,4.E-007));
+#624 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#625 = PCURVE('',#248,#626);
+#626 = DEFINITIONAL_REPRESENTATION('',(#627),#630);
+#627 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#628,#629),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#628 = CARTESIAN_POINT('',(15.502054698133,3.99999997569E-007));
+#629 = CARTESIAN_POINT('',(15.502054698133,-56.0000004));
+#630 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#631 = ORIENTED_EDGE('',*,*,#493,.T.);
+#632 = ADVANCED_FACE('',(#633),#248,.T.);
+#633 = FACE_BOUND('',#634,.T.);
+#634 = EDGE_LOOP('',(#635,#636,#637,#638));
+#635 = ORIENTED_EDGE('',*,*,#521,.F.);
+#636 = ORIENTED_EDGE('',*,*,#468,.T.);
+#637 = ORIENTED_EDGE('',*,*,#233,.F.);
+#638 = ORIENTED_EDGE('',*,*,#613,.F.);
+#639 = ADVANCED_FACE('',(#640),#320,.F.);
+#640 = FACE_BOUND('',#641,.F.);
+#641 = EDGE_LOOP('',(#642,#643,#666,#697));
+#642 = ORIENTED_EDGE('',*,*,#303,.F.);
+#643 = ORIENTED_EDGE('',*,*,#644,.T.);
+#644 = EDGE_CURVE('',#304,#645,#647,.T.);
+#645 = VERTEX_POINT('',#646);
+#646 = CARTESIAN_POINT('',(6.375,12.65,16.));
+#647 = SEAM_CURVE('',#648,(#652,#659),.PCURVE_S1.);
+#648 = LINE('',#649,#650);
+#649 = CARTESIAN_POINT('',(6.375,12.65,0.E+000));
+#650 = VECTOR('',#651,1.);
+#651 = DIRECTION('',(0.E+000,0.E+000,1.));
+#652 = PCURVE('',#320,#653);
+#653 = DEFINITIONAL_REPRESENTATION('',(#654),#658);
+#654 = LINE('',#655,#656);
+#655 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#656 = VECTOR('',#657,1.);
+#657 = DIRECTION('',(0.E+000,-1.));
+#658 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#659 = PCURVE('',#320,#660);
+#660 = DEFINITIONAL_REPRESENTATION('',(#661),#665);
+#661 = LINE('',#662,#663);
+#662 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#663 = VECTOR('',#664,1.);
+#664 = DIRECTION('',(0.E+000,-1.));
+#665 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#666 = ORIENTED_EDGE('',*,*,#667,.T.);
+#667 = EDGE_CURVE('',#645,#645,#668,.T.);
+#668 = SURFACE_CURVE('',#669,(#674,#681),.PCURVE_S1.);
+#669 = CIRCLE('',#670,6.375);
+#670 = AXIS2_PLACEMENT_3D('',#671,#672,#673);
+#671 = CARTESIAN_POINT('',(0.E+000,12.65,16.));
+#672 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#673 = DIRECTION('',(1.,0.E+000,0.E+000));
+#674 = PCURVE('',#320,#675);
+#675 = DEFINITIONAL_REPRESENTATION('',(#676),#680);
+#676 = LINE('',#677,#678);
+#677 = CARTESIAN_POINT('',(0.E+000,-16.));
+#678 = VECTOR('',#679,1.);
+#679 = DIRECTION('',(1.,0.E+000));
+#680 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#681 = PCURVE('',#682,#687);
+#682 = PLANE('',#683);
+#683 = AXIS2_PLACEMENT_3D('',#684,#685,#686);
+#684 = CARTESIAN_POINT('',(6.375,12.65,16.));
+#685 = DIRECTION('',(0.E+000,0.E+000,1.));
+#686 = DIRECTION('',(1.,0.E+000,0.E+000));
+#687 = DEFINITIONAL_REPRESENTATION('',(#688),#696);
+#688 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#689,#690,#691,#692,#693,#694
+,#695),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#689 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#690 = CARTESIAN_POINT('',(0.E+000,-11.04182389825));
+#691 = CARTESIAN_POINT('',(-9.5625,-5.520911949126));
+#692 = CARTESIAN_POINT('',(-19.125,-1.561424668913E-015));
+#693 = CARTESIAN_POINT('',(-9.5625,5.520911949126));
+#694 = CARTESIAN_POINT('',(-1.06581410364E-014,11.041823898252));
+#695 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#696 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#697 = ORIENTED_EDGE('',*,*,#644,.F.);
+#698 = ADVANCED_FACE('',(#699),#426,.F.);
+#699 = FACE_BOUND('',#700,.F.);
+#700 = EDGE_LOOP('',(#701,#722,#723,#724));
+#701 = ORIENTED_EDGE('',*,*,#702,.F.);
+#702 = EDGE_CURVE('',#546,#406,#703,.T.);
+#703 = SEAM_CURVE('',#704,(#708,#715),.PCURVE_S1.);
+#704 = LINE('',#705,#706);
+#705 = CARTESIAN_POINT('',(1.75,-16.7,56.));
+#706 = VECTOR('',#707,1.);
+#707 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#708 = PCURVE('',#426,#709);
+#709 = DEFINITIONAL_REPRESENTATION('',(#710),#714);
+#710 = LINE('',#711,#712);
+#711 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#712 = VECTOR('',#713,1.);
+#713 = DIRECTION('',(0.E+000,-1.));
+#714 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#715 = PCURVE('',#426,#716);
+#716 = DEFINITIONAL_REPRESENTATION('',(#717),#721);
+#717 = LINE('',#718,#719);
+#718 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#719 = VECTOR('',#720,1.);
+#720 = DIRECTION('',(0.E+000,-1.));
+#721 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#722 = ORIENTED_EDGE('',*,*,#545,.F.);
+#723 = ORIENTED_EDGE('',*,*,#702,.T.);
+#724 = ORIENTED_EDGE('',*,*,#405,.T.);
+#725 = ADVANCED_FACE('',(#726),#596,.F.);
+#726 = FACE_BOUND('',#727,.F.);
+#727 = EDGE_LOOP('',(#728,#751,#752,#753));
+#728 = ORIENTED_EDGE('',*,*,#729,.F.);
+#729 = EDGE_CURVE('',#576,#730,#732,.T.);
+#730 = VERTEX_POINT('',#731);
+#731 = CARTESIAN_POINT('',(3.925,12.65,16.));
+#732 = SEAM_CURVE('',#733,(#737,#744),.PCURVE_S1.);
+#733 = LINE('',#734,#735);
+#734 = CARTESIAN_POINT('',(3.925,12.65,56.));
+#735 = VECTOR('',#736,1.);
+#736 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#737 = PCURVE('',#596,#738);
+#738 = DEFINITIONAL_REPRESENTATION('',(#739),#743);
+#739 = LINE('',#740,#741);
+#740 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#741 = VECTOR('',#742,1.);
+#742 = DIRECTION('',(0.E+000,-1.));
+#743 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#744 = PCURVE('',#596,#745);
+#745 = DEFINITIONAL_REPRESENTATION('',(#746),#750);
+#746 = LINE('',#747,#748);
+#747 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#748 = VECTOR('',#749,1.);
+#749 = DIRECTION('',(0.E+000,-1.));
+#750 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#751 = ORIENTED_EDGE('',*,*,#575,.F.);
+#752 = ORIENTED_EDGE('',*,*,#729,.T.);
+#753 = ORIENTED_EDGE('',*,*,#754,.T.);
+#754 = EDGE_CURVE('',#730,#730,#755,.T.);
+#755 = SURFACE_CURVE('',#756,(#761,#768),.PCURVE_S1.);
+#756 = CIRCLE('',#757,3.925);
+#757 = AXIS2_PLACEMENT_3D('',#758,#759,#760);
+#758 = CARTESIAN_POINT('',(0.E+000,12.65,16.));
+#759 = DIRECTION('',(0.E+000,0.E+000,1.));
+#760 = DIRECTION('',(1.,0.E+000,0.E+000));
+#761 = PCURVE('',#596,#762);
+#762 = DEFINITIONAL_REPRESENTATION('',(#763),#767);
+#763 = LINE('',#764,#765);
+#764 = CARTESIAN_POINT('',(0.E+000,-40.));
+#765 = VECTOR('',#766,1.);
+#766 = DIRECTION('',(1.,0.E+000));
+#767 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#768 = PCURVE('',#682,#769);
+#769 = DEFINITIONAL_REPRESENTATION('',(#770),#774);
+#770 = CIRCLE('',#771,3.925);
+#771 = AXIS2_PLACEMENT_2D('',#772,#773);
+#772 = CARTESIAN_POINT('',(-6.375,0.E+000));
+#773 = DIRECTION('',(1.,0.E+000));
+#774 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#775 = ADVANCED_FACE('',(#776,#779),#682,.F.);
+#776 = FACE_BOUND('',#777,.F.);
+#777 = EDGE_LOOP('',(#778));
+#778 = ORIENTED_EDGE('',*,*,#667,.F.);
+#779 = FACE_BOUND('',#780,.F.);
+#780 = EDGE_LOOP('',(#781));
+#781 = ORIENTED_EDGE('',*,*,#754,.F.);
+#782 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) 
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#786)) GLOBAL_UNIT_ASSIGNED_CONTEXT
+((#783,#784,#785)) REPRESENTATION_CONTEXT('Context #1',
+  '3D Context with UNIT and UNCERTAINTY') );
+#783 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#784 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#785 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#786 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#783,
+  'distance_accuracy_value','confusion accuracy');
+#787 = PRODUCT_TYPE('part',$,(#7));
+#788 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#789)
+  ,#782);
+#789 = STYLED_ITEM('color',(#790),#15);
+#790 = PRESENTATION_STYLE_ASSIGNMENT((#791,#797));
+#791 = SURFACE_STYLE_USAGE(.BOTH.,#792);
+#792 = SURFACE_SIDE_STYLE('',(#793));
+#793 = SURFACE_STYLE_FILL_AREA(#794);
+#794 = FILL_AREA_STYLE('',(#795));
+#795 = FILL_AREA_STYLE_COLOUR('',#796);
+#796 = COLOUR_RGB('',0.800000011921,0.800000011921,0.800000011921);
+#797 = CURVE_STYLE('',#798,POSITIVE_LENGTH_MEASURE(0.1),#796);
+#798 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
+ENDSEC;
+END-ISO-10303-21;

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/mp-1_bolt_jig.step

@@ -0,0 +1,548 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('FreeCAD Model'),'2;1');
+FILE_NAME('C:/Users/Darren/Desktop/shuty mp1 final/mp-1 bolt jig.step',
+  '2016-02-20T19:16:41',('Author'),(''),
+  'Open CASCADE STEP processor 6.8','FreeCAD','Unknown');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }'));
+ENDSEC;
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft',
+  'automotive_design',1997,#2);
+#2 = APPLICATION_CONTEXT(
+  'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('Pocket001','Pocket001','',(#8));
+#8 = MECHANICAL_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#423);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#13 = DIRECTION('',(0.E+000,0.E+000,1.));
+#14 = DIRECTION('',(1.,0.E+000,-0.E+000));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#143,#216,#312,#338,#385,#417));
+#17 = ADVANCED_FACE('',(#18),#33,.T.);
+#18 = FACE_BOUND('',#19,.F.);
+#19 = EDGE_LOOP('',(#20,#60,#86,#119));
+#20 = ORIENTED_EDGE('',*,*,#21,.F.);
+#21 = EDGE_CURVE('',#22,#24,#26,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(-7.11249,6.9796722795,0.E+000));
+#24 = VERTEX_POINT('',#25);
+#25 = CARTESIAN_POINT('',(-25.11177285338,-14.2196,0.E+000));
+#26 = SURFACE_CURVE('',#27,(#32,#44),.PCURVE_S1.);
+#27 = CIRCLE('',#28,25.3);
+#28 = AXIS2_PLACEMENT_3D('',#29,#30,#31);
+#29 = CARTESIAN_POINT('',(0.E+000,-17.3,0.E+000));
+#30 = DIRECTION('',(0.E+000,0.E+000,1.));
+#31 = DIRECTION('',(1.,0.E+000,0.E+000));
+#32 = PCURVE('',#33,#38);
+#33 = CYLINDRICAL_SURFACE('',#34,25.3);
+#34 = AXIS2_PLACEMENT_3D('',#35,#36,#37);
+#35 = CARTESIAN_POINT('',(0.E+000,-17.3,0.E+000));
+#36 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#37 = DIRECTION('',(1.,0.E+000,0.E+000));
+#38 = DEFINITIONAL_REPRESENTATION('',(#39),#43);
+#39 = LINE('',#40,#41);
+#40 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#41 = VECTOR('',#42,1.);
+#42 = DIRECTION('',(-1.,0.E+000));
+#43 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#44 = PCURVE('',#45,#50);
+#45 = PLANE('',#46);
+#46 = AXIS2_PLACEMENT_3D('',#47,#48,#49);
+#47 = CARTESIAN_POINT('',(25.3,-17.3,0.E+000));
+#48 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#49 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#50 = DEFINITIONAL_REPRESENTATION('',(#51),#59);
+#51 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#52,#53,#54,#55,#56,#57,#58),
+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#52 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#53 = CARTESIAN_POINT('',(0.E+000,43.820885431493));
+#54 = CARTESIAN_POINT('',(37.95,21.910442715746));
+#55 = CARTESIAN_POINT('',(75.9,6.196712803686E-015));
+#56 = CARTESIAN_POINT('',(37.95,-21.91044271574));
+#57 = CARTESIAN_POINT('',(4.263256414561E-014,-43.82088543149));
+#58 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#59 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#60 = ORIENTED_EDGE('',*,*,#61,.F.);
+#61 = EDGE_CURVE('',#62,#22,#64,.T.);
+#62 = VERTEX_POINT('',#63);
+#63 = CARTESIAN_POINT('',(-7.11249,6.9796722795,85.));
+#64 = SURFACE_CURVE('',#65,(#69,#75),.PCURVE_S1.);
+#65 = LINE('',#66,#67);
+#66 = CARTESIAN_POINT('',(-7.11249,6.9796722795,0.E+000));
+#67 = VECTOR('',#68,1.);
+#68 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#69 = PCURVE('',#33,#70);
+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#74);
+#71 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#72,#73),.UNSPECIFIED.,.F.,.F.,(2,
+    2),(-85.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#72 = CARTESIAN_POINT('',(-1.855763644246,-85.0000004));
+#73 = CARTESIAN_POINT('',(-1.855763644246,4.E-007));
+#74 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#75 = PCURVE('',#76,#81);
+#76 = PLANE('',#77);
+#77 = AXIS2_PLACEMENT_3D('',#78,#79,#80);
+#78 = CARTESIAN_POINT('',(-7.11249,11.81183,85.));
+#79 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#80 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#81 = DEFINITIONAL_REPRESENTATION('',(#82),#85);
+#82 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#83,#84),.UNSPECIFIED.,.F.,.F.,(2,
+    2),(-85.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#83 = CARTESIAN_POINT('',(4.8321577205,4.000000046744E-007));
+#84 = CARTESIAN_POINT('',(4.8321577205,-85.0000004));
+#85 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#86 = ORIENTED_EDGE('',*,*,#87,.T.);
+#87 = EDGE_CURVE('',#62,#88,#90,.T.);
+#88 = VERTEX_POINT('',#89);
+#89 = CARTESIAN_POINT('',(-25.11177285338,-14.2196,85.));
+#90 = SURFACE_CURVE('',#91,(#96,#103),.PCURVE_S1.);
+#91 = CIRCLE('',#92,25.3);
+#92 = AXIS2_PLACEMENT_3D('',#93,#94,#95);
+#93 = CARTESIAN_POINT('',(0.E+000,-17.3,85.));
+#94 = DIRECTION('',(0.E+000,0.E+000,1.));
+#95 = DIRECTION('',(1.,0.E+000,0.E+000));
+#96 = PCURVE('',#33,#97);
+#97 = DEFINITIONAL_REPRESENTATION('',(#98),#102);
+#98 = LINE('',#99,#100);
+#99 = CARTESIAN_POINT('',(-0.E+000,-85.));
+#100 = VECTOR('',#101,1.);
+#101 = DIRECTION('',(-1.,0.E+000));
+#102 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#103 = PCURVE('',#104,#109);
+#104 = PLANE('',#105);
+#105 = AXIS2_PLACEMENT_3D('',#106,#107,#108);
+#106 = CARTESIAN_POINT('',(25.3,-17.3,85.));
+#107 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#108 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#109 = DEFINITIONAL_REPRESENTATION('',(#110),#118);
+#110 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#111,#112,#113,#114,#115,#116
+,#117),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#111 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#112 = CARTESIAN_POINT('',(0.E+000,43.820885431493));
+#113 = CARTESIAN_POINT('',(37.95,21.910442715746));
+#114 = CARTESIAN_POINT('',(75.9,6.196712803686E-015));
+#115 = CARTESIAN_POINT('',(37.95,-21.91044271574));
+#116 = CARTESIAN_POINT('',(4.263256414561E-014,-43.82088543149));
+#117 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#118 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#119 = ORIENTED_EDGE('',*,*,#120,.T.);
+#120 = EDGE_CURVE('',#88,#24,#121,.T.);
+#121 = SURFACE_CURVE('',#122,(#126,#132),.PCURVE_S1.);
+#122 = LINE('',#123,#124);
+#123 = CARTESIAN_POINT('',(-25.11177285338,-14.2196,0.E+000));
+#124 = VECTOR('',#125,1.);
+#125 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#126 = PCURVE('',#33,#127);
+#127 = DEFINITIONAL_REPRESENTATION('',(#128),#131);
+#128 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#129,#130),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-85.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#129 = CARTESIAN_POINT('',(-3.019534866973,-85.0000004));
+#130 = CARTESIAN_POINT('',(-3.019534866973,4.E-007));
+#131 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#132 = PCURVE('',#133,#138);
+#133 = PLANE('',#134);
+#134 = AXIS2_PLACEMENT_3D('',#135,#136,#137);
+#135 = CARTESIAN_POINT('',(-7.11249,-14.2196,85.));
+#136 = DIRECTION('',(0.E+000,1.,0.E+000));
+#137 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#138 = DEFINITIONAL_REPRESENTATION('',(#139),#142);
+#139 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#140,#141),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-85.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#140 = CARTESIAN_POINT('',(17.999282853385,4.000000046744E-007));
+#141 = CARTESIAN_POINT('',(17.999282853385,-85.0000004));
+#142 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#143 = ADVANCED_FACE('',(#144),#45,.T.);
+#144 = FACE_BOUND('',#145,.T.);
+#145 = EDGE_LOOP('',(#146,#147,#168,#197));
+#146 = ORIENTED_EDGE('',*,*,#21,.F.);
+#147 = ORIENTED_EDGE('',*,*,#148,.F.);
+#148 = EDGE_CURVE('',#149,#22,#151,.T.);
+#149 = VERTEX_POINT('',#150);
+#150 = CARTESIAN_POINT('',(-7.11249,3.835337376061,0.E+000));
+#151 = SURFACE_CURVE('',#152,(#156,#162),.PCURVE_S1.);
+#152 = LINE('',#153,#154);
+#153 = CARTESIAN_POINT('',(-7.11249,-2.744085,0.E+000));
+#154 = VECTOR('',#155,1.);
+#155 = DIRECTION('',(0.E+000,1.,0.E+000));
+#156 = PCURVE('',#45,#157);
+#157 = DEFINITIONAL_REPRESENTATION('',(#158),#161);
+#158 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#159,#160),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-14.078658,15.804085),.PIECEWISE_BEZIER_KNOTS.);
+#159 = CARTESIAN_POINT('',(32.41249,0.477257));
+#160 = CARTESIAN_POINT('',(32.41249,30.36));
+#161 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#162 = PCURVE('',#76,#163);
+#163 = DEFINITIONAL_REPRESENTATION('',(#164),#167);
+#164 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#165,#166),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-14.078658,15.804085),.PIECEWISE_BEZIER_KNOTS.);
+#165 = CARTESIAN_POINT('',(28.634573,-85.));
+#166 = CARTESIAN_POINT('',(-1.24817,-85.));
+#167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#168 = ORIENTED_EDGE('',*,*,#169,.F.);
+#169 = EDGE_CURVE('',#170,#149,#172,.T.);
+#170 = VERTEX_POINT('',#171);
+#171 = CARTESIAN_POINT('',(-22.08622049695,-14.2196,0.E+000));
+#172 = SURFACE_CURVE('',#173,(#178,#185),.PCURVE_S1.);
+#173 = CIRCLE('',#174,22.3);
+#174 = AXIS2_PLACEMENT_3D('',#175,#176,#177);
+#175 = CARTESIAN_POINT('',(0.E+000,-17.3,0.E+000));
+#176 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#177 = DIRECTION('',(1.,0.E+000,0.E+000));
+#178 = PCURVE('',#45,#179);
+#179 = DEFINITIONAL_REPRESENTATION('',(#180),#184);
+#180 = CIRCLE('',#181,22.3);
+#181 = AXIS2_PLACEMENT_2D('',#182,#183);
+#182 = CARTESIAN_POINT('',(25.3,0.E+000));
+#183 = DIRECTION('',(-1.,0.E+000));
+#184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#185 = PCURVE('',#186,#191);
+#186 = CYLINDRICAL_SURFACE('',#187,22.3);
+#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190);
+#188 = CARTESIAN_POINT('',(0.E+000,-17.3,0.E+000));
+#189 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#190 = DIRECTION('',(1.,0.E+000,0.E+000));
+#191 = DEFINITIONAL_REPRESENTATION('',(#192),#196);
+#192 = LINE('',#193,#194);
+#193 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#194 = VECTOR('',#195,1.);
+#195 = DIRECTION('',(1.,0.E+000));
+#196 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#197 = ORIENTED_EDGE('',*,*,#198,.F.);
+#198 = EDGE_CURVE('',#24,#170,#199,.T.);
+#199 = SURFACE_CURVE('',#200,(#204,#210),.PCURVE_S1.);
+#200 = LINE('',#201,#202);
+#201 = CARTESIAN_POINT('',(9.093755,-14.2196,0.E+000));
+#202 = VECTOR('',#203,1.);
+#203 = DIRECTION('',(1.,0.E+000,0.E+000));
+#204 = PCURVE('',#45,#205);
+#205 = DEFINITIONAL_REPRESENTATION('',(#206),#209);
+#206 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#207,#208),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-39.453755,-13.3104414),.PIECEWISE_BEZIER_KNOTS.);
+#207 = CARTESIAN_POINT('',(55.66,3.0804));
+#208 = CARTESIAN_POINT('',(29.5166864,3.0804));
+#209 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#210 = PCURVE('',#133,#211);
+#211 = DEFINITIONAL_REPRESENTATION('',(#212),#215);
+#212 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#213,#214),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-39.453755,-13.3104414),.PIECEWISE_BEZIER_KNOTS.);
+#213 = CARTESIAN_POINT('',(23.24751,-85.));
+#214 = CARTESIAN_POINT('',(-2.8958036,-85.));
+#215 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#216 = ADVANCED_FACE('',(#217),#133,.F.);
+#217 = FACE_BOUND('',#218,.F.);
+#218 = EDGE_LOOP('',(#219,#242,#265,#291,#310,#311));
+#219 = ORIENTED_EDGE('',*,*,#220,.F.);
+#220 = EDGE_CURVE('',#221,#88,#223,.T.);
+#221 = VERTEX_POINT('',#222);
+#222 = CARTESIAN_POINT('',(-7.11249,-14.2196,85.));
+#223 = SURFACE_CURVE('',#224,(#228,#235),.PCURVE_S1.);
+#224 = LINE('',#225,#226);
+#225 = CARTESIAN_POINT('',(-7.11249,-14.2196,85.));
+#226 = VECTOR('',#227,1.);
+#227 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#228 = PCURVE('',#133,#229);
+#229 = DEFINITIONAL_REPRESENTATION('',(#230),#234);
+#230 = LINE('',#231,#232);
+#231 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#232 = VECTOR('',#233,1.);
+#233 = DIRECTION('',(1.,0.E+000));
+#234 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#235 = PCURVE('',#104,#236);
+#236 = DEFINITIONAL_REPRESENTATION('',(#237),#241);
+#237 = LINE('',#238,#239);
+#238 = CARTESIAN_POINT('',(32.41249,3.0804));
+#239 = VECTOR('',#240,1.);
+#240 = DIRECTION('',(1.,0.E+000));
+#241 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#242 = ORIENTED_EDGE('',*,*,#243,.T.);
+#243 = EDGE_CURVE('',#221,#244,#246,.T.);
+#244 = VERTEX_POINT('',#245);
+#245 = CARTESIAN_POINT('',(-7.11249,-14.2196,82.));
+#246 = SURFACE_CURVE('',#247,(#251,#258),.PCURVE_S1.);
+#247 = LINE('',#248,#249);
+#248 = CARTESIAN_POINT('',(-7.11249,-14.2196,85.));
+#249 = VECTOR('',#250,1.);
+#250 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#251 = PCURVE('',#133,#252);
+#252 = DEFINITIONAL_REPRESENTATION('',(#253),#257);
+#253 = LINE('',#254,#255);
+#254 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#255 = VECTOR('',#256,1.);
+#256 = DIRECTION('',(0.E+000,-1.));
+#257 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#258 = PCURVE('',#76,#259);
+#259 = DEFINITIONAL_REPRESENTATION('',(#260),#264);
+#260 = LINE('',#261,#262);
+#261 = CARTESIAN_POINT('',(26.03143,0.E+000));
+#262 = VECTOR('',#263,1.);
+#263 = DIRECTION('',(0.E+000,-1.));
+#264 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#265 = ORIENTED_EDGE('',*,*,#266,.F.);
+#266 = EDGE_CURVE('',#267,#244,#269,.T.);
+#267 = VERTEX_POINT('',#268);
+#268 = CARTESIAN_POINT('',(-22.08622049695,-14.2196,82.));
+#269 = SURFACE_CURVE('',#270,(#274,#280),.PCURVE_S1.);
+#270 = LINE('',#271,#272);
+#271 = CARTESIAN_POINT('',(7.593755,-14.2196,82.));
+#272 = VECTOR('',#273,1.);
+#273 = DIRECTION('',(1.,0.E+000,0.E+000));
+#274 = PCURVE('',#133,#275);
+#275 = DEFINITIONAL_REPRESENTATION('',(#276),#279);
+#276 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#277,#278),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-34.353755,-12.90631671466),.PIECEWISE_BEZIER_KNOTS.);
+#277 = CARTESIAN_POINT('',(19.64751,-3.));
+#278 = CARTESIAN_POINT('',(-1.799928285338,-3.));
+#279 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#280 = PCURVE('',#281,#286);
+#281 = PLANE('',#282);
+#282 = AXIS2_PLACEMENT_3D('',#283,#284,#285);
+#283 = CARTESIAN_POINT('',(22.3,-17.3,82.));
+#284 = DIRECTION('',(0.E+000,0.E+000,1.));
+#285 = DIRECTION('',(1.,0.E+000,0.E+000));
+#286 = DEFINITIONAL_REPRESENTATION('',(#287),#290);
+#287 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#288,#289),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-34.353755,-12.90631671466),.PIECEWISE_BEZIER_KNOTS.);
+#288 = CARTESIAN_POINT('',(-49.06,3.0804));
+#289 = CARTESIAN_POINT('',(-27.61256171466,3.0804));
+#290 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#291 = ORIENTED_EDGE('',*,*,#292,.T.);
+#292 = EDGE_CURVE('',#267,#170,#293,.T.);
+#293 = SURFACE_CURVE('',#294,(#298,#304),.PCURVE_S1.);
+#294 = LINE('',#295,#296);
+#295 = CARTESIAN_POINT('',(-22.08622049695,-14.2196,0.E+000));
+#296 = VECTOR('',#297,1.);
+#297 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#298 = PCURVE('',#133,#299);
+#299 = DEFINITIONAL_REPRESENTATION('',(#300),#303);
+#300 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#301,#302),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-82.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#301 = CARTESIAN_POINT('',(14.973730496952,-2.9999996));
+#302 = CARTESIAN_POINT('',(14.973730496952,-85.0000004));
+#303 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#304 = PCURVE('',#186,#305);
+#305 = DEFINITIONAL_REPRESENTATION('',(#306),#309);
+#306 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#307,#308),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-82.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#307 = CARTESIAN_POINT('',(3.280170292387,-82.0000004));
+#308 = CARTESIAN_POINT('',(3.280170292387,4.E-007));
+#309 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#310 = ORIENTED_EDGE('',*,*,#198,.F.);
+#311 = ORIENTED_EDGE('',*,*,#120,.F.);
+#312 = ADVANCED_FACE('',(#313),#104,.F.);
+#313 = FACE_BOUND('',#314,.F.);
+#314 = EDGE_LOOP('',(#315,#316,#337));
+#315 = ORIENTED_EDGE('',*,*,#87,.F.);
+#316 = ORIENTED_EDGE('',*,*,#317,.T.);
+#317 = EDGE_CURVE('',#62,#221,#318,.T.);
+#318 = SURFACE_CURVE('',#319,(#323,#330),.PCURVE_S1.);
+#319 = LINE('',#320,#321);
+#320 = CARTESIAN_POINT('',(-7.11249,11.81183,85.));
+#321 = VECTOR('',#322,1.);
+#322 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#323 = PCURVE('',#104,#324);
+#324 = DEFINITIONAL_REPRESENTATION('',(#325),#329);
+#325 = LINE('',#326,#327);
+#326 = CARTESIAN_POINT('',(32.41249,29.11183));
+#327 = VECTOR('',#328,1.);
+#328 = DIRECTION('',(0.E+000,-1.));
+#329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#330 = PCURVE('',#76,#331);
+#331 = DEFINITIONAL_REPRESENTATION('',(#332),#336);
+#332 = LINE('',#333,#334);
+#333 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#334 = VECTOR('',#335,1.);
+#335 = DIRECTION('',(1.,0.E+000));
+#336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#337 = ORIENTED_EDGE('',*,*,#220,.T.);
+#338 = ADVANCED_FACE('',(#339),#76,.F.);
+#339 = FACE_BOUND('',#340,.F.);
+#340 = EDGE_LOOP('',(#341,#342,#343,#344,#365,#384));
+#341 = ORIENTED_EDGE('',*,*,#317,.F.);
+#342 = ORIENTED_EDGE('',*,*,#61,.T.);
+#343 = ORIENTED_EDGE('',*,*,#148,.F.);
+#344 = ORIENTED_EDGE('',*,*,#345,.F.);
+#345 = EDGE_CURVE('',#346,#149,#348,.T.);
+#346 = VERTEX_POINT('',#347);
+#347 = CARTESIAN_POINT('',(-7.11249,3.835337376061,82.));
+#348 = SURFACE_CURVE('',#349,(#353,#359),.PCURVE_S1.);
+#349 = LINE('',#350,#351);
+#350 = CARTESIAN_POINT('',(-7.11249,3.835337376061,0.E+000));
+#351 = VECTOR('',#352,1.);
+#352 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#353 = PCURVE('',#76,#354);
+#354 = DEFINITIONAL_REPRESENTATION('',(#355),#358);
+#355 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#356,#357),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-82.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#356 = CARTESIAN_POINT('',(7.976492623939,-2.9999996));
+#357 = CARTESIAN_POINT('',(7.976492623939,-85.0000004));
+#358 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#359 = PCURVE('',#186,#360);
+#360 = DEFINITIONAL_REPRESENTATION('',(#361),#364);
+#361 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#362,#363),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-82.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#362 = CARTESIAN_POINT('',(4.387772056677,-82.0000004));
+#363 = CARTESIAN_POINT('',(4.387772056677,4.E-007));
+#364 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#365 = ORIENTED_EDGE('',*,*,#366,.F.);
+#366 = EDGE_CURVE('',#244,#346,#367,.T.);
+#367 = SURFACE_CURVE('',#368,(#372,#378),.PCURVE_S1.);
+#368 = LINE('',#369,#370);
+#369 = CARTESIAN_POINT('',(-7.11249,-2.744085,82.));
+#370 = VECTOR('',#371,1.);
+#371 = DIRECTION('',(0.E+000,1.,0.E+000));
+#372 = PCURVE('',#76,#373);
+#373 = DEFINITIONAL_REPRESENTATION('',(#374),#377);
+#374 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#375,#376),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-13.59544222795,11.84368450745),.PIECEWISE_BEZIER_KNOTS.);
+#375 = CARTESIAN_POINT('',(28.15135722795,-3.));
+#376 = CARTESIAN_POINT('',(2.71223049255,-3.));
+#377 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#378 = PCURVE('',#281,#379);
+#379 = DEFINITIONAL_REPRESENTATION('',(#380),#383);
+#380 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#381,#382),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-13.59544222795,11.84368450745),.PIECEWISE_BEZIER_KNOTS.);
+#381 = CARTESIAN_POINT('',(-29.41249,0.96047277205));
+#382 = CARTESIAN_POINT('',(-29.41249,26.39959950745));
+#383 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#384 = ORIENTED_EDGE('',*,*,#243,.F.);
+#385 = ADVANCED_FACE('',(#386),#186,.F.);
+#386 = FACE_BOUND('',#387,.F.);
+#387 = EDGE_LOOP('',(#388,#389,#390,#416));
+#388 = ORIENTED_EDGE('',*,*,#169,.F.);
+#389 = ORIENTED_EDGE('',*,*,#292,.F.);
+#390 = ORIENTED_EDGE('',*,*,#391,.T.);
+#391 = EDGE_CURVE('',#267,#346,#392,.T.);
+#392 = SURFACE_CURVE('',#393,(#398,#405),.PCURVE_S1.);
+#393 = CIRCLE('',#394,22.3);
+#394 = AXIS2_PLACEMENT_3D('',#395,#396,#397);
+#395 = CARTESIAN_POINT('',(0.E+000,-17.3,82.));
+#396 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#397 = DIRECTION('',(1.,0.E+000,0.E+000));
+#398 = PCURVE('',#186,#399);
+#399 = DEFINITIONAL_REPRESENTATION('',(#400),#404);
+#400 = LINE('',#401,#402);
+#401 = CARTESIAN_POINT('',(0.E+000,-82.));
+#402 = VECTOR('',#403,1.);
+#403 = DIRECTION('',(1.,0.E+000));
+#404 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#405 = PCURVE('',#281,#406);
+#406 = DEFINITIONAL_REPRESENTATION('',(#407),#415);
+#407 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#408,#409,#410,#411,#412,#413
+,#414),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#408 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#409 = CARTESIAN_POINT('',(0.E+000,-38.62473300878));
+#410 = CARTESIAN_POINT('',(-33.45,-19.31236650439));
+#411 = CARTESIAN_POINT('',(-66.9,-5.461924724197E-015));
+#412 = CARTESIAN_POINT('',(-33.45,19.312366504393));
+#413 = CARTESIAN_POINT('',(-3.552713678801E-014,38.624733008786));
+#414 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#415 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#416 = ORIENTED_EDGE('',*,*,#345,.T.);
+#417 = ADVANCED_FACE('',(#418),#281,.F.);
+#418 = FACE_BOUND('',#419,.F.);
+#419 = EDGE_LOOP('',(#420,#421,#422));
+#420 = ORIENTED_EDGE('',*,*,#391,.F.);
+#421 = ORIENTED_EDGE('',*,*,#266,.T.);
+#422 = ORIENTED_EDGE('',*,*,#366,.T.);
+#423 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) 
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#427)) GLOBAL_UNIT_ASSIGNED_CONTEXT
+((#424,#425,#426)) REPRESENTATION_CONTEXT('Context #1',
+  '3D Context with UNIT and UNCERTAINTY') );
+#424 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#425 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#426 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#427 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#424,
+  'distance_accuracy_value','confusion accuracy');
+#428 = PRODUCT_TYPE('part',$,(#7));
+#429 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#430)
+  ,#423);
+#430 = STYLED_ITEM('color',(#431),#15);
+#431 = PRESENTATION_STYLE_ASSIGNMENT((#432,#438));
+#432 = SURFACE_STYLE_USAGE(.BOTH.,#433);
+#433 = SURFACE_SIDE_STYLE('',(#434));
+#434 = SURFACE_STYLE_FILL_AREA(#435);
+#435 = FILL_AREA_STYLE('',(#436));
+#436 = FILL_AREA_STYLE_COLOUR('',#437);
+#437 = COLOUR_RGB('',0.800000011921,0.800000011921,0.800000011921);
+#438 = CURVE_STYLE('',#439,POSITIVE_LENGTH_MEASURE(0.1),#437);
+#439 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
+ENDSEC;
+END-ISO-10303-21;

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/mp-1_charging_handle.step

@@ -0,0 +1,301 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('FreeCAD Model'),'2;1');
+FILE_NAME(
+'C:/Users/Darren/Desktop/shuty mp1 final/mp-1 step/mp-1 charging 
+handle.step','2016-02-20T16:17:14',('Author'),(''),
+  'Open CASCADE STEP processor 6.8','FreeCAD','Unknown');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }'));
+ENDSEC;
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft',
+  'automotive_design',1997,#2);
+#2 = APPLICATION_CONTEXT(
+  'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('Pocket','Pocket','',(#8));
+#8 = MECHANICAL_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#232);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#13 = DIRECTION('',(0.E+000,0.E+000,1.));
+#14 = DIRECTION('',(1.,0.E+000,-0.E+000));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#85,#140,#199,#228));
+#17 = ADVANCED_FACE('',(#18,#54),#31,.T.);
+#18 = FACE_BOUND('',#19,.T.);
+#19 = EDGE_LOOP('',(#20));
+#20 = ORIENTED_EDGE('',*,*,#21,.T.);
+#21 = EDGE_CURVE('',#22,#22,#24,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(5.,-1.224646799147E-015,7.));
+#24 = SURFACE_CURVE('',#25,(#30,#42),.PCURVE_S1.);
+#25 = CIRCLE('',#26,5.);
+#26 = AXIS2_PLACEMENT_3D('',#27,#28,#29);
+#27 = CARTESIAN_POINT('',(0.E+000,0.E+000,7.));
+#28 = DIRECTION('',(0.E+000,0.E+000,1.));
+#29 = DIRECTION('',(1.,0.E+000,0.E+000));
+#30 = PCURVE('',#31,#36);
+#31 = PLANE('',#32);
+#32 = AXIS2_PLACEMENT_3D('',#33,#34,#35);
+#33 = CARTESIAN_POINT('',(0.E+000,0.E+000,7.));
+#34 = DIRECTION('',(0.E+000,0.E+000,1.));
+#35 = DIRECTION('',(1.,0.E+000,0.E+000));
+#36 = DEFINITIONAL_REPRESENTATION('',(#37),#41);
+#37 = CIRCLE('',#38,5.);
+#38 = AXIS2_PLACEMENT_2D('',#39,#40);
+#39 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#40 = DIRECTION('',(1.,0.E+000));
+#41 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#42 = PCURVE('',#43,#48);
+#43 = CYLINDRICAL_SURFACE('',#44,5.);
+#44 = AXIS2_PLACEMENT_3D('',#45,#46,#47);
+#45 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#46 = DIRECTION('',(0.E+000,0.E+000,1.));
+#47 = DIRECTION('',(1.,0.E+000,0.E+000));
+#48 = DEFINITIONAL_REPRESENTATION('',(#49),#53);
+#49 = LINE('',#50,#51);
+#50 = CARTESIAN_POINT('',(0.E+000,7.));
+#51 = VECTOR('',#52,1.);
+#52 = DIRECTION('',(1.,0.E+000));
+#53 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#54 = FACE_BOUND('',#55,.T.);
+#55 = EDGE_LOOP('',(#56));
+#56 = ORIENTED_EDGE('',*,*,#57,.F.);
+#57 = EDGE_CURVE('',#58,#58,#60,.T.);
+#58 = VERTEX_POINT('',#59);
+#59 = CARTESIAN_POINT('',(1.5,0.E+000,7.));
+#60 = SURFACE_CURVE('',#61,(#66,#73),.PCURVE_S1.);
+#61 = CIRCLE('',#62,1.5);
+#62 = AXIS2_PLACEMENT_3D('',#63,#64,#65);
+#63 = CARTESIAN_POINT('',(0.E+000,0.E+000,7.));
+#64 = DIRECTION('',(0.E+000,0.E+000,1.));
+#65 = DIRECTION('',(1.,0.E+000,0.E+000));
+#66 = PCURVE('',#31,#67);
+#67 = DEFINITIONAL_REPRESENTATION('',(#68),#72);
+#68 = CIRCLE('',#69,1.5);
+#69 = AXIS2_PLACEMENT_2D('',#70,#71);
+#70 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#71 = DIRECTION('',(1.,0.E+000));
+#72 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#73 = PCURVE('',#74,#79);
+#74 = CYLINDRICAL_SURFACE('',#75,1.5);
+#75 = AXIS2_PLACEMENT_3D('',#76,#77,#78);
+#76 = CARTESIAN_POINT('',(0.E+000,0.E+000,7.));
+#77 = DIRECTION('',(0.E+000,0.E+000,1.));
+#78 = DIRECTION('',(1.,0.E+000,0.E+000));
+#79 = DEFINITIONAL_REPRESENTATION('',(#80),#84);
+#80 = LINE('',#81,#82);
+#81 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#82 = VECTOR('',#83,1.);
+#83 = DIRECTION('',(1.,0.E+000));
+#84 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#85 = ADVANCED_FACE('',(#86),#43,.T.);
+#86 = FACE_BOUND('',#87,.T.);
+#87 = EDGE_LOOP('',(#88,#111,#112,#113));
+#88 = ORIENTED_EDGE('',*,*,#89,.T.);
+#89 = EDGE_CURVE('',#90,#22,#92,.T.);
+#90 = VERTEX_POINT('',#91);
+#91 = CARTESIAN_POINT('',(5.,-1.224646799147E-015,2.483314773548));
+#92 = SEAM_CURVE('',#93,(#97,#104),.PCURVE_S1.);
+#93 = LINE('',#94,#95);
+#94 = CARTESIAN_POINT('',(5.,-1.224646799147E-015,0.E+000));
+#95 = VECTOR('',#96,1.);
+#96 = DIRECTION('',(0.E+000,0.E+000,1.));
+#97 = PCURVE('',#43,#98);
+#98 = DEFINITIONAL_REPRESENTATION('',(#99),#103);
+#99 = LINE('',#100,#101);
+#100 = CARTESIAN_POINT('',(6.28318530718,-0.E+000));
+#101 = VECTOR('',#102,1.);
+#102 = DIRECTION('',(0.E+000,1.));
+#103 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#104 = PCURVE('',#43,#105);
+#105 = DEFINITIONAL_REPRESENTATION('',(#106),#110);
+#106 = LINE('',#107,#108);
+#107 = CARTESIAN_POINT('',(0.E+000,-0.E+000));
+#108 = VECTOR('',#109,1.);
+#109 = DIRECTION('',(0.E+000,1.));
+#110 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#111 = ORIENTED_EDGE('',*,*,#21,.F.);
+#112 = ORIENTED_EDGE('',*,*,#89,.F.);
+#113 = ORIENTED_EDGE('',*,*,#114,.T.);
+#114 = EDGE_CURVE('',#90,#90,#115,.T.);
+#115 = SURFACE_CURVE('',#116,(#121,#128),.PCURVE_S1.);
+#116 = CIRCLE('',#117,5.);
+#117 = AXIS2_PLACEMENT_3D('',#118,#119,#120);
+#118 = CARTESIAN_POINT('',(0.E+000,0.E+000,2.483314773548));
+#119 = DIRECTION('',(-0.E+000,0.E+000,1.));
+#120 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#121 = PCURVE('',#43,#122);
+#122 = DEFINITIONAL_REPRESENTATION('',(#123),#127);
+#123 = LINE('',#124,#125);
+#124 = CARTESIAN_POINT('',(-1.570796326795,2.483314773548));
+#125 = VECTOR('',#126,1.);
+#126 = DIRECTION('',(1.,0.E+000));
+#127 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#128 = PCURVE('',#129,#134);
+#129 = SPHERICAL_SURFACE('',#130,9.);
+#130 = AXIS2_PLACEMENT_3D('',#131,#132,#133);
+#131 = CARTESIAN_POINT('',(0.E+000,0.E+000,-5.));
+#132 = DIRECTION('',(0.E+000,0.E+000,1.));
+#133 = DIRECTION('',(1.,0.E+000,0.E+000));
+#134 = DEFINITIONAL_REPRESENTATION('',(#135),#139);
+#135 = LINE('',#136,#137);
+#136 = CARTESIAN_POINT('',(-1.570796326795,0.981765356579));
+#137 = VECTOR('',#138,1.);
+#138 = DIRECTION('',(1.,0.E+000));
+#139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#140 = ADVANCED_FACE('',(#141),#74,.F.);
+#141 = FACE_BOUND('',#142,.F.);
+#142 = EDGE_LOOP('',(#143,#144,#167,#198));
+#143 = ORIENTED_EDGE('',*,*,#57,.F.);
+#144 = ORIENTED_EDGE('',*,*,#145,.T.);
+#145 = EDGE_CURVE('',#58,#146,#148,.T.);
+#146 = VERTEX_POINT('',#147);
+#147 = CARTESIAN_POINT('',(1.5,0.E+000,-13.));
+#148 = SEAM_CURVE('',#149,(#153,#160),.PCURVE_S1.);
+#149 = LINE('',#150,#151);
+#150 = CARTESIAN_POINT('',(1.5,0.E+000,7.));
+#151 = VECTOR('',#152,1.);
+#152 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#153 = PCURVE('',#74,#154);
+#154 = DEFINITIONAL_REPRESENTATION('',(#155),#159);
+#155 = LINE('',#156,#157);
+#156 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#157 = VECTOR('',#158,1.);
+#158 = DIRECTION('',(0.E+000,-1.));
+#159 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#160 = PCURVE('',#74,#161);
+#161 = DEFINITIONAL_REPRESENTATION('',(#162),#166);
+#162 = LINE('',#163,#164);
+#163 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#164 = VECTOR('',#165,1.);
+#165 = DIRECTION('',(0.E+000,-1.));
+#166 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#167 = ORIENTED_EDGE('',*,*,#168,.T.);
+#168 = EDGE_CURVE('',#146,#146,#169,.T.);
+#169 = SURFACE_CURVE('',#170,(#175,#182),.PCURVE_S1.);
+#170 = CIRCLE('',#171,1.5);
+#171 = AXIS2_PLACEMENT_3D('',#172,#173,#174);
+#172 = CARTESIAN_POINT('',(0.E+000,0.E+000,-13.));
+#173 = DIRECTION('',(0.E+000,0.E+000,1.));
+#174 = DIRECTION('',(1.,0.E+000,0.E+000));
+#175 = PCURVE('',#74,#176);
+#176 = DEFINITIONAL_REPRESENTATION('',(#177),#181);
+#177 = LINE('',#178,#179);
+#178 = CARTESIAN_POINT('',(0.E+000,-20.));
+#179 = VECTOR('',#180,1.);
+#180 = DIRECTION('',(1.,0.E+000));
+#181 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#182 = PCURVE('',#183,#188);
+#183 = PLANE('',#184);
+#184 = AXIS2_PLACEMENT_3D('',#185,#186,#187);
+#185 = CARTESIAN_POINT('',(1.5,0.E+000,-13.));
+#186 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#187 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#188 = DEFINITIONAL_REPRESENTATION('',(#189),#197);
+#189 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#190,#191,#192,#193,#194,#195
+,#196),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#190 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#191 = CARTESIAN_POINT('',(0.E+000,2.598076211353));
+#192 = CARTESIAN_POINT('',(2.25,1.299038105677));
+#193 = CARTESIAN_POINT('',(4.5,3.673940397442E-016));
+#194 = CARTESIAN_POINT('',(2.25,-1.299038105677));
+#195 = CARTESIAN_POINT('',(2.442490654175E-015,-2.598076211353));
+#196 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#197 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#198 = ORIENTED_EDGE('',*,*,#145,.F.);
+#199 = ADVANCED_FACE('',(#200),#129,.T.);
+#200 = FACE_BOUND('',#201,.T.);
+#201 = EDGE_LOOP('',(#202,#203,#227));
+#202 = ORIENTED_EDGE('',*,*,#114,.F.);
+#203 = ORIENTED_EDGE('',*,*,#204,.F.);
+#204 = EDGE_CURVE('',#205,#90,#207,.T.);
+#205 = VERTEX_POINT('',#206);
+#206 = CARTESIAN_POINT('',(5.510910596163E-016,-1.349783804396E-031,-14.
+    ));
+#207 = SEAM_CURVE('',#208,(#213,#220),.PCURVE_S1.);
+#208 = CIRCLE('',#209,9.);
+#209 = AXIS2_PLACEMENT_3D('',#210,#211,#212);
+#210 = CARTESIAN_POINT('',(0.E+000,0.E+000,-5.));
+#211 = DIRECTION('',(-2.449293598295E-016,-1.,0.E+000));
+#212 = DIRECTION('',(1.,-2.449293598295E-016,0.E+000));
+#213 = PCURVE('',#129,#214);
+#214 = DEFINITIONAL_REPRESENTATION('',(#215),#219);
+#215 = LINE('',#216,#217);
+#216 = CARTESIAN_POINT('',(6.28318530718,-6.28318530718));
+#217 = VECTOR('',#218,1.);
+#218 = DIRECTION('',(0.E+000,1.));
+#219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#220 = PCURVE('',#129,#221);
+#221 = DEFINITIONAL_REPRESENTATION('',(#222),#226);
+#222 = LINE('',#223,#224);
+#223 = CARTESIAN_POINT('',(0.E+000,-6.28318530718));
+#224 = VECTOR('',#225,1.);
+#225 = DIRECTION('',(0.E+000,1.));
+#226 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#227 = ORIENTED_EDGE('',*,*,#204,.T.);
+#228 = ADVANCED_FACE('',(#229),#183,.F.);
+#229 = FACE_BOUND('',#230,.T.);
+#230 = EDGE_LOOP('',(#231));
+#231 = ORIENTED_EDGE('',*,*,#168,.T.);
+#232 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) 
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#236)) GLOBAL_UNIT_ASSIGNED_CONTEXT
+((#233,#234,#235)) REPRESENTATION_CONTEXT('Context #1',
+  '3D Context with UNIT and UNCERTAINTY') );
+#233 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#234 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#235 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#236 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#233,
+  'distance_accuracy_value','confusion accuracy');
+#237 = PRODUCT_TYPE('part',$,(#7));
+#238 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#239)
+  ,#232);
+#239 = STYLED_ITEM('color',(#240),#15);
+#240 = PRESENTATION_STYLE_ASSIGNMENT((#241,#247));
+#241 = SURFACE_STYLE_USAGE(.BOTH.,#242);
+#242 = SURFACE_SIDE_STYLE('',(#243));
+#243 = SURFACE_STYLE_FILL_AREA(#244);
+#244 = FILL_AREA_STYLE('',(#245));
+#245 = FILL_AREA_STYLE_COLOUR('',#246);
+#246 = COLOUR_RGB('',0.800000011921,0.800000011921,0.800000011921);
+#247 = CURVE_STYLE('',#248,POSITIVE_LENGTH_MEASURE(0.1),#246);
+#248 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
+ENDSEC;
+END-ISO-10303-21;

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/mp-1_feed_guide.step

@@ -0,0 +1,982 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('FreeCAD Model'),'2;1');
+FILE_NAME(
+'C:/Users/Darren/Desktop/shuty mp1 final/mp-1 step/gluty feed 
+guide.step','2016-02-20T18:18:49',('Author'),(''),
+  'Open CASCADE STEP processor 6.8','FreeCAD','Unknown');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }'));
+ENDSEC;
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft',
+  'automotive_design',1997,#2);
+#2 = APPLICATION_CONTEXT(
+  'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('Pocket','Pocket','',(#8));
+#8 = MECHANICAL_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#813);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#13 = DIRECTION('',(0.E+000,0.E+000,1.));
+#14 = DIRECTION('',(1.,0.E+000,-0.E+000));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#168,#223,#434,#483,#645,#672,#702,#747,#774,
+    #781,#806));
+#17 = ADVANCED_FACE('',(#18,#54),#31,.F.);
+#18 = FACE_BOUND('',#19,.F.);
+#19 = EDGE_LOOP('',(#20));
+#20 = ORIENTED_EDGE('',*,*,#21,.F.);
+#21 = EDGE_CURVE('',#22,#22,#24,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(11.,-5.,0.E+000));
+#24 = SURFACE_CURVE('',#25,(#30,#42),.PCURVE_S1.);
+#25 = CIRCLE('',#26,2.);
+#26 = AXIS2_PLACEMENT_3D('',#27,#28,#29);
+#27 = CARTESIAN_POINT('',(9.,-5.,0.E+000));
+#28 = DIRECTION('',(0.E+000,0.E+000,1.));
+#29 = DIRECTION('',(1.,0.E+000,0.E+000));
+#30 = PCURVE('',#31,#36);
+#31 = PLANE('',#32);
+#32 = AXIS2_PLACEMENT_3D('',#33,#34,#35);
+#33 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#34 = DIRECTION('',(0.E+000,0.E+000,1.));
+#35 = DIRECTION('',(1.,0.E+000,0.E+000));
+#36 = DEFINITIONAL_REPRESENTATION('',(#37),#41);
+#37 = CIRCLE('',#38,2.);
+#38 = AXIS2_PLACEMENT_2D('',#39,#40);
+#39 = CARTESIAN_POINT('',(9.,-5.));
+#40 = DIRECTION('',(1.,0.E+000));
+#41 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#42 = PCURVE('',#43,#48);
+#43 = CYLINDRICAL_SURFACE('',#44,2.);
+#44 = AXIS2_PLACEMENT_3D('',#45,#46,#47);
+#45 = CARTESIAN_POINT('',(9.,-5.,10.));
+#46 = DIRECTION('',(0.E+000,0.E+000,1.));
+#47 = DIRECTION('',(1.,0.E+000,0.E+000));
+#48 = DEFINITIONAL_REPRESENTATION('',(#49),#53);
+#49 = LINE('',#50,#51);
+#50 = CARTESIAN_POINT('',(0.E+000,-10.));
+#51 = VECTOR('',#52,1.);
+#52 = DIRECTION('',(1.,0.E+000));
+#53 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#54 = FACE_BOUND('',#55,.F.);
+#55 = EDGE_LOOP('',(#56,#86,#114,#142));
+#56 = ORIENTED_EDGE('',*,*,#57,.F.);
+#57 = EDGE_CURVE('',#58,#60,#62,.T.);
+#58 = VERTEX_POINT('',#59);
+#59 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#60 = VERTEX_POINT('',#61);
+#61 = CARTESIAN_POINT('',(13.5,0.E+000,0.E+000));
+#62 = SURFACE_CURVE('',#63,(#67,#74),.PCURVE_S1.);
+#63 = LINE('',#64,#65);
+#64 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#65 = VECTOR('',#66,1.);
+#66 = DIRECTION('',(1.,0.E+000,0.E+000));
+#67 = PCURVE('',#31,#68);
+#68 = DEFINITIONAL_REPRESENTATION('',(#69),#73);
+#69 = LINE('',#70,#71);
+#70 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#71 = VECTOR('',#72,1.);
+#72 = DIRECTION('',(1.,0.E+000));
+#73 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#74 = PCURVE('',#75,#80);
+#75 = PLANE('',#76);
+#76 = AXIS2_PLACEMENT_3D('',#77,#78,#79);
+#77 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#78 = DIRECTION('',(0.E+000,1.,0.E+000));
+#79 = DIRECTION('',(1.,0.E+000,0.E+000));
+#80 = DEFINITIONAL_REPRESENTATION('',(#81),#85);
+#81 = LINE('',#82,#83);
+#82 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#83 = VECTOR('',#84,1.);
+#84 = DIRECTION('',(1.,0.E+000));
+#85 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#86 = ORIENTED_EDGE('',*,*,#87,.F.);
+#87 = EDGE_CURVE('',#88,#58,#90,.T.);
+#88 = VERTEX_POINT('',#89);
+#89 = CARTESIAN_POINT('',(0.E+000,-10.,0.E+000));
+#90 = SURFACE_CURVE('',#91,(#95,#102),.PCURVE_S1.);
+#91 = LINE('',#92,#93);
+#92 = CARTESIAN_POINT('',(0.E+000,-10.,0.E+000));
+#93 = VECTOR('',#94,1.);
+#94 = DIRECTION('',(0.E+000,1.,0.E+000));
+#95 = PCURVE('',#31,#96);
+#96 = DEFINITIONAL_REPRESENTATION('',(#97),#101);
+#97 = LINE('',#98,#99);
+#98 = CARTESIAN_POINT('',(0.E+000,-10.));
+#99 = VECTOR('',#100,1.);
+#100 = DIRECTION('',(0.E+000,1.));
+#101 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#102 = PCURVE('',#103,#108);
+#103 = PLANE('',#104);
+#104 = AXIS2_PLACEMENT_3D('',#105,#106,#107);
+#105 = CARTESIAN_POINT('',(0.E+000,-10.,0.E+000));
+#106 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#107 = DIRECTION('',(0.E+000,1.,0.E+000));
+#108 = DEFINITIONAL_REPRESENTATION('',(#109),#113);
+#109 = LINE('',#110,#111);
+#110 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#111 = VECTOR('',#112,1.);
+#112 = DIRECTION('',(1.,0.E+000));
+#113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#114 = ORIENTED_EDGE('',*,*,#115,.F.);
+#115 = EDGE_CURVE('',#116,#88,#118,.T.);
+#116 = VERTEX_POINT('',#117);
+#117 = CARTESIAN_POINT('',(13.5,-10.,0.E+000));
+#118 = SURFACE_CURVE('',#119,(#123,#130),.PCURVE_S1.);
+#119 = LINE('',#120,#121);
+#120 = CARTESIAN_POINT('',(13.5,-10.,0.E+000));
+#121 = VECTOR('',#122,1.);
+#122 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#123 = PCURVE('',#31,#124);
+#124 = DEFINITIONAL_REPRESENTATION('',(#125),#129);
+#125 = LINE('',#126,#127);
+#126 = CARTESIAN_POINT('',(13.5,-10.));
+#127 = VECTOR('',#128,1.);
+#128 = DIRECTION('',(-1.,0.E+000));
+#129 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#130 = PCURVE('',#131,#136);
+#131 = PLANE('',#132);
+#132 = AXIS2_PLACEMENT_3D('',#133,#134,#135);
+#133 = CARTESIAN_POINT('',(13.5,-10.,0.E+000));
+#134 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#135 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#136 = DEFINITIONAL_REPRESENTATION('',(#137),#141);
+#137 = LINE('',#138,#139);
+#138 = CARTESIAN_POINT('',(0.E+000,-0.E+000));
+#139 = VECTOR('',#140,1.);
+#140 = DIRECTION('',(1.,0.E+000));
+#141 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#142 = ORIENTED_EDGE('',*,*,#143,.F.);
+#143 = EDGE_CURVE('',#60,#116,#144,.T.);
+#144 = SURFACE_CURVE('',#145,(#149,#156),.PCURVE_S1.);
+#145 = LINE('',#146,#147);
+#146 = CARTESIAN_POINT('',(13.5,0.E+000,0.E+000));
+#147 = VECTOR('',#148,1.);
+#148 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#149 = PCURVE('',#31,#150);
+#150 = DEFINITIONAL_REPRESENTATION('',(#151),#155);
+#151 = LINE('',#152,#153);
+#152 = CARTESIAN_POINT('',(13.5,0.E+000));
+#153 = VECTOR('',#154,1.);
+#154 = DIRECTION('',(0.E+000,-1.));
+#155 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#156 = PCURVE('',#157,#162);
+#157 = PLANE('',#158);
+#158 = AXIS2_PLACEMENT_3D('',#159,#160,#161);
+#159 = CARTESIAN_POINT('',(13.5,0.E+000,0.E+000));
+#160 = DIRECTION('',(1.,0.E+000,0.E+000));
+#161 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#162 = DEFINITIONAL_REPRESENTATION('',(#163),#167);
+#163 = LINE('',#164,#165);
+#164 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#165 = VECTOR('',#166,1.);
+#166 = DIRECTION('',(1.,0.E+000));
+#167 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#168 = ADVANCED_FACE('',(#169),#43,.F.);
+#169 = FACE_BOUND('',#170,.F.);
+#170 = EDGE_LOOP('',(#171,#200,#221,#222));
+#171 = ORIENTED_EDGE('',*,*,#172,.F.);
+#172 = EDGE_CURVE('',#173,#173,#175,.T.);
+#173 = VERTEX_POINT('',#174);
+#174 = CARTESIAN_POINT('',(11.,-5.,10.));
+#175 = SURFACE_CURVE('',#176,(#181,#188),.PCURVE_S1.);
+#176 = CIRCLE('',#177,2.);
+#177 = AXIS2_PLACEMENT_3D('',#178,#179,#180);
+#178 = CARTESIAN_POINT('',(9.,-5.,10.));
+#179 = DIRECTION('',(0.E+000,0.E+000,1.));
+#180 = DIRECTION('',(1.,0.E+000,0.E+000));
+#181 = PCURVE('',#43,#182);
+#182 = DEFINITIONAL_REPRESENTATION('',(#183),#187);
+#183 = LINE('',#184,#185);
+#184 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#185 = VECTOR('',#186,1.);
+#186 = DIRECTION('',(1.,0.E+000));
+#187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#188 = PCURVE('',#189,#194);
+#189 = PLANE('',#190);
+#190 = AXIS2_PLACEMENT_3D('',#191,#192,#193);
+#191 = CARTESIAN_POINT('',(5.,0.838141,10.));
+#192 = DIRECTION('',(0.E+000,0.E+000,1.));
+#193 = DIRECTION('',(1.,0.E+000,0.E+000));
+#194 = DEFINITIONAL_REPRESENTATION('',(#195),#199);
+#195 = CIRCLE('',#196,2.);
+#196 = AXIS2_PLACEMENT_2D('',#197,#198);
+#197 = CARTESIAN_POINT('',(4.,-5.838141));
+#198 = DIRECTION('',(1.,0.E+000));
+#199 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#200 = ORIENTED_EDGE('',*,*,#201,.T.);
+#201 = EDGE_CURVE('',#173,#22,#202,.T.);
+#202 = SEAM_CURVE('',#203,(#207,#214),.PCURVE_S1.);
+#203 = LINE('',#204,#205);
+#204 = CARTESIAN_POINT('',(11.,-5.,10.));
+#205 = VECTOR('',#206,1.);
+#206 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#207 = PCURVE('',#43,#208);
+#208 = DEFINITIONAL_REPRESENTATION('',(#209),#213);
+#209 = LINE('',#210,#211);
+#210 = CARTESIAN_POINT('',(4.138911435803E-013,0.E+000));
+#211 = VECTOR('',#212,1.);
+#212 = DIRECTION('',(0.E+000,-1.));
+#213 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#214 = PCURVE('',#43,#215);
+#215 = DEFINITIONAL_REPRESENTATION('',(#216),#220);
+#216 = LINE('',#217,#218);
+#217 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#218 = VECTOR('',#219,1.);
+#219 = DIRECTION('',(0.E+000,-1.));
+#220 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#221 = ORIENTED_EDGE('',*,*,#21,.T.);
+#222 = ORIENTED_EDGE('',*,*,#201,.F.);
+#223 = ADVANCED_FACE('',(#224),#75,.T.);
+#224 = FACE_BOUND('',#225,.T.);
+#225 = EDGE_LOOP('',(#226,#256,#284,#312,#335,#356,#357,#380,#408));
+#226 = ORIENTED_EDGE('',*,*,#227,.T.);
+#227 = EDGE_CURVE('',#228,#230,#232,.T.);
+#228 = VERTEX_POINT('',#229);
+#229 = CARTESIAN_POINT('',(0.E+000,0.E+000,16.057224));
+#230 = VERTEX_POINT('',#231);
+#231 = CARTESIAN_POINT('',(-4.440892098501E-016,2.133979462661E-015,
+    19.221178225716));
+#232 = SURFACE_CURVE('',#233,(#237,#244),.PCURVE_S1.);
+#233 = LINE('',#234,#235);
+#234 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#235 = VECTOR('',#236,1.);
+#236 = DIRECTION('',(0.E+000,0.E+000,1.));
+#237 = PCURVE('',#75,#238);
+#238 = DEFINITIONAL_REPRESENTATION('',(#239),#243);
+#239 = LINE('',#240,#241);
+#240 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#241 = VECTOR('',#242,1.);
+#242 = DIRECTION('',(0.E+000,-1.));
+#243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#244 = PCURVE('',#245,#250);
+#245 = PLANE('',#246);
+#246 = AXIS2_PLACEMENT_3D('',#247,#248,#249);
+#247 = CARTESIAN_POINT('',(0.E+000,-10.,0.E+000));
+#248 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#249 = DIRECTION('',(0.E+000,1.,0.E+000));
+#250 = DEFINITIONAL_REPRESENTATION('',(#251),#255);
+#251 = LINE('',#252,#253);
+#252 = CARTESIAN_POINT('',(10.,0.E+000));
+#253 = VECTOR('',#254,1.);
+#254 = DIRECTION('',(0.E+000,-1.));
+#255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#256 = ORIENTED_EDGE('',*,*,#257,.F.);
+#257 = EDGE_CURVE('',#258,#230,#260,.T.);
+#258 = VERTEX_POINT('',#259);
+#259 = CARTESIAN_POINT('',(5.,2.246935565485E-015,20.238596350891));
+#260 = SURFACE_CURVE('',#261,(#265,#272),.PCURVE_S1.);
+#261 = LINE('',#262,#263);
+#262 = CARTESIAN_POINT('',(6.515447,4.562342725833E-015,20.546965));
+#263 = VECTOR('',#264,1.);
+#264 = DIRECTION('',(-0.979918707128,-4.427511929664E-017,
+    -0.199397410766));
+#265 = PCURVE('',#75,#266);
+#266 = DEFINITIONAL_REPRESENTATION('',(#267),#271);
+#267 = LINE('',#268,#269);
+#268 = CARTESIAN_POINT('',(6.515447,-20.546965));
+#269 = VECTOR('',#270,1.);
+#270 = DIRECTION('',(-0.979918707128,0.199397410766));
+#271 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#272 = PCURVE('',#273,#278);
+#273 = PLANE('',#274);
+#274 = AXIS2_PLACEMENT_3D('',#275,#276,#277);
+#275 = CARTESIAN_POINT('',(6.515447,4.562342725833E-015,20.546965));
+#276 = DIRECTION('',(0.199397410766,-2.175856621829E-016,-0.979918707128
+    ));
+#277 = DIRECTION('',(-0.979918707128,-4.427511929664E-017,
+    -0.199397410766));
+#278 = DEFINITIONAL_REPRESENTATION('',(#279),#283);
+#279 = LINE('',#280,#281);
+#280 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#281 = VECTOR('',#282,1.);
+#282 = DIRECTION('',(1.,0.E+000));
+#283 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#284 = ORIENTED_EDGE('',*,*,#285,.T.);
+#285 = EDGE_CURVE('',#258,#286,#288,.T.);
+#286 = VERTEX_POINT('',#287);
+#287 = CARTESIAN_POINT('',(5.,0.E+000,10.));
+#288 = SURFACE_CURVE('',#289,(#293,#300),.PCURVE_S1.);
+#289 = LINE('',#290,#291);
+#290 = CARTESIAN_POINT('',(5.,0.E+000,10.25));
+#291 = VECTOR('',#292,1.);
+#292 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#293 = PCURVE('',#75,#294);
+#294 = DEFINITIONAL_REPRESENTATION('',(#295),#299);
+#295 = LINE('',#296,#297);
+#296 = CARTESIAN_POINT('',(5.,-10.25));
+#297 = VECTOR('',#298,1.);
+#298 = DIRECTION('',(0.E+000,1.));
+#299 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#300 = PCURVE('',#301,#306);
+#301 = PLANE('',#302);
+#302 = AXIS2_PLACEMENT_3D('',#303,#304,#305);
+#303 = CARTESIAN_POINT('',(5.,-11.193313,20.5));
+#304 = DIRECTION('',(1.,0.E+000,0.E+000));
+#305 = DIRECTION('',(0.E+000,1.,0.E+000));
+#306 = DEFINITIONAL_REPRESENTATION('',(#307),#311);
+#307 = LINE('',#308,#309);
+#308 = CARTESIAN_POINT('',(11.193313,-10.25));
+#309 = VECTOR('',#310,1.);
+#310 = DIRECTION('',(0.E+000,-1.));
+#311 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#312 = ORIENTED_EDGE('',*,*,#313,.T.);
+#313 = EDGE_CURVE('',#286,#314,#316,.T.);
+#314 = VERTEX_POINT('',#315);
+#315 = CARTESIAN_POINT('',(13.5,0.E+000,10.));
+#316 = SURFACE_CURVE('',#317,(#321,#328),.PCURVE_S1.);
+#317 = LINE('',#318,#319);
+#318 = CARTESIAN_POINT('',(2.5,0.E+000,10.));
+#319 = VECTOR('',#320,1.);
+#320 = DIRECTION('',(1.,0.E+000,0.E+000));
+#321 = PCURVE('',#75,#322);
+#322 = DEFINITIONAL_REPRESENTATION('',(#323),#327);
+#323 = LINE('',#324,#325);
+#324 = CARTESIAN_POINT('',(2.5,-10.));
+#325 = VECTOR('',#326,1.);
+#326 = DIRECTION('',(1.,0.E+000));
+#327 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#328 = PCURVE('',#189,#329);
+#329 = DEFINITIONAL_REPRESENTATION('',(#330),#334);
+#330 = LINE('',#331,#332);
+#331 = CARTESIAN_POINT('',(-2.5,-0.838141));
+#332 = VECTOR('',#333,1.);
+#333 = DIRECTION('',(1.,0.E+000));
+#334 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#335 = ORIENTED_EDGE('',*,*,#336,.F.);
+#336 = EDGE_CURVE('',#60,#314,#337,.T.);
+#337 = SURFACE_CURVE('',#338,(#342,#349),.PCURVE_S1.);
+#338 = LINE('',#339,#340);
+#339 = CARTESIAN_POINT('',(13.5,0.E+000,0.E+000));
+#340 = VECTOR('',#341,1.);
+#341 = DIRECTION('',(0.E+000,0.E+000,1.));
+#342 = PCURVE('',#75,#343);
+#343 = DEFINITIONAL_REPRESENTATION('',(#344),#348);
+#344 = LINE('',#345,#346);
+#345 = CARTESIAN_POINT('',(13.5,0.E+000));
+#346 = VECTOR('',#347,1.);
+#347 = DIRECTION('',(0.E+000,-1.));
+#348 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#349 = PCURVE('',#157,#350);
+#350 = DEFINITIONAL_REPRESENTATION('',(#351),#355);
+#351 = LINE('',#352,#353);
+#352 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#353 = VECTOR('',#354,1.);
+#354 = DIRECTION('',(0.E+000,-1.));
+#355 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#356 = ORIENTED_EDGE('',*,*,#57,.F.);
+#357 = ORIENTED_EDGE('',*,*,#358,.T.);
+#358 = EDGE_CURVE('',#58,#359,#361,.T.);
+#359 = VERTEX_POINT('',#360);
+#360 = CARTESIAN_POINT('',(0.E+000,0.E+000,11.791209333333));
+#361 = SURFACE_CURVE('',#362,(#366,#373),.PCURVE_S1.);
+#362 = LINE('',#363,#364);
+#363 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#364 = VECTOR('',#365,1.);
+#365 = DIRECTION('',(0.E+000,0.E+000,1.));
+#366 = PCURVE('',#75,#367);
+#367 = DEFINITIONAL_REPRESENTATION('',(#368),#372);
+#368 = LINE('',#369,#370);
+#369 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#370 = VECTOR('',#371,1.);
+#371 = DIRECTION('',(0.E+000,-1.));
+#372 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#373 = PCURVE('',#103,#374);
+#374 = DEFINITIONAL_REPRESENTATION('',(#375),#379);
+#375 = LINE('',#376,#377);
+#376 = CARTESIAN_POINT('',(10.,0.E+000));
+#377 = VECTOR('',#378,1.);
+#378 = DIRECTION('',(0.E+000,-1.));
+#379 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#380 = ORIENTED_EDGE('',*,*,#381,.T.);
+#381 = EDGE_CURVE('',#359,#382,#384,.T.);
+#382 = VERTEX_POINT('',#383);
+#383 = CARTESIAN_POINT('',(0.839216,0.E+000,16.057224));
+#384 = SURFACE_CURVE('',#385,(#389,#396),.PCURVE_S1.);
+#385 = LINE('',#386,#387);
+#386 = CARTESIAN_POINT('',(-0.696972236999,0.E+000,8.24826712859));
+#387 = VECTOR('',#388,1.);
+#388 = DIRECTION('',(0.193021860293,0.E+000,0.981194456491));
+#389 = PCURVE('',#75,#390);
+#390 = DEFINITIONAL_REPRESENTATION('',(#391),#395);
+#391 = LINE('',#392,#393);
+#392 = CARTESIAN_POINT('',(-0.696972236999,-8.24826712859));
+#393 = VECTOR('',#394,1.);
+#394 = DIRECTION('',(0.193021860293,-0.981194456491));
+#395 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#396 = PCURVE('',#397,#402);
+#397 = PLANE('',#398);
+#398 = AXIS2_PLACEMENT_3D('',#399,#400,#401);
+#399 = CARTESIAN_POINT('',(0.839216,-10.,16.057224));
+#400 = DIRECTION('',(-0.981194456491,4.285946271074E-017,0.193021860293)
+  );
+#401 = DIRECTION('',(-0.193021860293,-2.178689354462E-016,
+    -0.981194456491));
+#402 = DEFINITIONAL_REPRESENTATION('',(#403),#407);
+#403 = LINE('',#404,#405);
+#404 = CARTESIAN_POINT('',(7.958623104472,-10.));
+#405 = VECTOR('',#406,1.);
+#406 = DIRECTION('',(-1.,2.178689354462E-016));
+#407 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#408 = ORIENTED_EDGE('',*,*,#409,.T.);
+#409 = EDGE_CURVE('',#382,#228,#410,.T.);
+#410 = SURFACE_CURVE('',#411,(#415,#422),.PCURVE_S1.);
+#411 = LINE('',#412,#413);
+#412 = CARTESIAN_POINT('',(-1.339555,0.E+000,16.057224));
+#413 = VECTOR('',#414,1.);
+#414 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#415 = PCURVE('',#75,#416);
+#416 = DEFINITIONAL_REPRESENTATION('',(#417),#421);
+#417 = LINE('',#418,#419);
+#418 = CARTESIAN_POINT('',(-1.339555,-16.057224));
+#419 = VECTOR('',#420,1.);
+#420 = DIRECTION('',(-1.,0.E+000));
+#421 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#422 = PCURVE('',#423,#428);
+#423 = PLANE('',#424);
+#424 = AXIS2_PLACEMENT_3D('',#425,#426,#427);
+#425 = CARTESIAN_POINT('',(-2.67911,-10.,16.057224));
+#426 = DIRECTION('',(0.E+000,-2.22044604925E-016,-1.));
+#427 = DIRECTION('',(1.,0.E+000,0.E+000));
+#428 = DEFINITIONAL_REPRESENTATION('',(#429),#433);
+#429 = LINE('',#430,#431);
+#430 = CARTESIAN_POINT('',(1.339555,-10.));
+#431 = VECTOR('',#432,1.);
+#432 = DIRECTION('',(-1.,0.E+000));
+#433 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#434 = ADVANCED_FACE('',(#435),#103,.T.);
+#435 = FACE_BOUND('',#436,.T.);
+#436 = EDGE_LOOP('',(#437,#460,#461,#462));
+#437 = ORIENTED_EDGE('',*,*,#438,.T.);
+#438 = EDGE_CURVE('',#439,#359,#441,.T.);
+#439 = VERTEX_POINT('',#440);
+#440 = CARTESIAN_POINT('',(-7.216449660064E-016,-10.,11.791209333333));
+#441 = SURFACE_CURVE('',#442,(#446,#453),.PCURVE_S1.);
+#442 = LINE('',#443,#444);
+#443 = CARTESIAN_POINT('',(-7.771561172376E-016,-10.,11.791209333333));
+#444 = VECTOR('',#445,1.);
+#445 = DIRECTION('',(0.E+000,1.,-2.22044604925E-016));
+#446 = PCURVE('',#103,#447);
+#447 = DEFINITIONAL_REPRESENTATION('',(#448),#452);
+#448 = LINE('',#449,#450);
+#449 = CARTESIAN_POINT('',(0.E+000,-11.79120933333));
+#450 = VECTOR('',#451,1.);
+#451 = DIRECTION('',(1.,2.22044604925E-016));
+#452 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#453 = PCURVE('',#397,#454);
+#454 = DEFINITIONAL_REPRESENTATION('',(#455),#459);
+#455 = LINE('',#456,#457);
+#456 = CARTESIAN_POINT('',(4.347776975751,-9.472455412646E-016));
+#457 = VECTOR('',#458,1.);
+#458 = DIRECTION('',(-5.581190904439E-029,-1.));
+#459 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#460 = ORIENTED_EDGE('',*,*,#358,.F.);
+#461 = ORIENTED_EDGE('',*,*,#87,.F.);
+#462 = ORIENTED_EDGE('',*,*,#463,.T.);
+#463 = EDGE_CURVE('',#88,#439,#464,.T.);
+#464 = SURFACE_CURVE('',#465,(#469,#476),.PCURVE_S1.);
+#465 = LINE('',#466,#467);
+#466 = CARTESIAN_POINT('',(0.E+000,-10.,0.E+000));
+#467 = VECTOR('',#468,1.);
+#468 = DIRECTION('',(0.E+000,0.E+000,1.));
+#469 = PCURVE('',#103,#470);
+#470 = DEFINITIONAL_REPRESENTATION('',(#471),#475);
+#471 = LINE('',#472,#473);
+#472 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#473 = VECTOR('',#474,1.);
+#474 = DIRECTION('',(0.E+000,-1.));
+#475 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#476 = PCURVE('',#131,#477);
+#477 = DEFINITIONAL_REPRESENTATION('',(#478),#482);
+#478 = LINE('',#479,#480);
+#479 = CARTESIAN_POINT('',(13.5,0.E+000));
+#480 = VECTOR('',#481,1.);
+#481 = DIRECTION('',(0.E+000,-1.));
+#482 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#483 = ADVANCED_FACE('',(#484),#131,.T.);
+#484 = FACE_BOUND('',#485,.T.);
+#485 = EDGE_LOOP('',(#486,#487,#510,#533,#556,#577,#600,#623,#644));
+#486 = ORIENTED_EDGE('',*,*,#115,.F.);
+#487 = ORIENTED_EDGE('',*,*,#488,.T.);
+#488 = EDGE_CURVE('',#116,#489,#491,.T.);
+#489 = VERTEX_POINT('',#490);
+#490 = CARTESIAN_POINT('',(13.5,-10.,10.));
+#491 = SURFACE_CURVE('',#492,(#496,#503),.PCURVE_S1.);
+#492 = LINE('',#493,#494);
+#493 = CARTESIAN_POINT('',(13.5,-10.,0.E+000));
+#494 = VECTOR('',#495,1.);
+#495 = DIRECTION('',(0.E+000,0.E+000,1.));
+#496 = PCURVE('',#131,#497);
+#497 = DEFINITIONAL_REPRESENTATION('',(#498),#502);
+#498 = LINE('',#499,#500);
+#499 = CARTESIAN_POINT('',(0.E+000,-0.E+000));
+#500 = VECTOR('',#501,1.);
+#501 = DIRECTION('',(0.E+000,-1.));
+#502 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#503 = PCURVE('',#157,#504);
+#504 = DEFINITIONAL_REPRESENTATION('',(#505),#509);
+#505 = LINE('',#506,#507);
+#506 = CARTESIAN_POINT('',(10.,0.E+000));
+#507 = VECTOR('',#508,1.);
+#508 = DIRECTION('',(0.E+000,-1.));
+#509 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#510 = ORIENTED_EDGE('',*,*,#511,.T.);
+#511 = EDGE_CURVE('',#489,#512,#514,.T.);
+#512 = VERTEX_POINT('',#513);
+#513 = CARTESIAN_POINT('',(5.,-10.,10.));
+#514 = SURFACE_CURVE('',#515,(#519,#526),.PCURVE_S1.);
+#515 = LINE('',#516,#517);
+#516 = CARTESIAN_POINT('',(9.25,-10.,10.));
+#517 = VECTOR('',#518,1.);
+#518 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#519 = PCURVE('',#131,#520);
+#520 = DEFINITIONAL_REPRESENTATION('',(#521),#525);
+#521 = LINE('',#522,#523);
+#522 = CARTESIAN_POINT('',(4.25,-10.));
+#523 = VECTOR('',#524,1.);
+#524 = DIRECTION('',(1.,0.E+000));
+#525 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#526 = PCURVE('',#189,#527);
+#527 = DEFINITIONAL_REPRESENTATION('',(#528),#532);
+#528 = LINE('',#529,#530);
+#529 = CARTESIAN_POINT('',(4.25,-10.838141));
+#530 = VECTOR('',#531,1.);
+#531 = DIRECTION('',(-1.,0.E+000));
+#532 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#533 = ORIENTED_EDGE('',*,*,#534,.T.);
+#534 = EDGE_CURVE('',#512,#535,#537,.T.);
+#535 = VERTEX_POINT('',#536);
+#536 = CARTESIAN_POINT('',(5.,-10.,20.238596350891));
+#537 = SURFACE_CURVE('',#538,(#542,#549),.PCURVE_S1.);
+#538 = LINE('',#539,#540);
+#539 = CARTESIAN_POINT('',(5.,-10.,10.25));
+#540 = VECTOR('',#541,1.);
+#541 = DIRECTION('',(0.E+000,0.E+000,1.));
+#542 = PCURVE('',#131,#543);
+#543 = DEFINITIONAL_REPRESENTATION('',(#544),#548);
+#544 = LINE('',#545,#546);
+#545 = CARTESIAN_POINT('',(8.5,-10.25));
+#546 = VECTOR('',#547,1.);
+#547 = DIRECTION('',(0.E+000,-1.));
+#548 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#549 = PCURVE('',#301,#550);
+#550 = DEFINITIONAL_REPRESENTATION('',(#551),#555);
+#551 = LINE('',#552,#553);
+#552 = CARTESIAN_POINT('',(1.193313,-10.25));
+#553 = VECTOR('',#554,1.);
+#554 = DIRECTION('',(0.E+000,1.));
+#555 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#556 = ORIENTED_EDGE('',*,*,#557,.F.);
+#557 = EDGE_CURVE('',#558,#535,#560,.T.);
+#558 = VERTEX_POINT('',#559);
+#559 = CARTESIAN_POINT('',(0.E+000,-10.,19.221178225716));
+#560 = SURFACE_CURVE('',#561,(#565,#571),.PCURVE_S1.);
+#561 = LINE('',#562,#563);
+#562 = CARTESIAN_POINT('',(7.861503770265,-10.,20.820865511116));
+#563 = VECTOR('',#564,1.);
+#564 = DIRECTION('',(0.979918707128,0.E+000,0.199397410766));
+#565 = PCURVE('',#131,#566);
+#566 = DEFINITIONAL_REPRESENTATION('',(#567),#570);
+#567 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#568,#569),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-9.400273413762,-0.467126984039),.PIECEWISE_BEZIER_KNOTS.);
+#568 = CARTESIAN_POINT('',(14.85,-18.94647533191));
+#569 = CARTESIAN_POINT('',(6.0962427,-20.7277216));
+#570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#571 = PCURVE('',#273,#572);
+#572 = DEFINITIONAL_REPRESENTATION('',(#573),#576);
+#573 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#574,#575),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-9.400273413762,-0.467126984039),.PIECEWISE_BEZIER_KNOTS.);
+#574 = CARTESIAN_POINT('',(8.026632150999,-10.));
+#575 = CARTESIAN_POINT('',(-0.906514278724,-10.));
+#576 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#577 = ORIENTED_EDGE('',*,*,#578,.F.);
+#578 = EDGE_CURVE('',#579,#558,#581,.T.);
+#579 = VERTEX_POINT('',#580);
+#580 = CARTESIAN_POINT('',(0.E+000,-10.,16.057224));
+#581 = SURFACE_CURVE('',#582,(#586,#593),.PCURVE_S1.);
+#582 = LINE('',#583,#584);
+#583 = CARTESIAN_POINT('',(0.E+000,-10.,0.E+000));
+#584 = VECTOR('',#585,1.);
+#585 = DIRECTION('',(0.E+000,0.E+000,1.));
+#586 = PCURVE('',#131,#587);
+#587 = DEFINITIONAL_REPRESENTATION('',(#588),#592);
+#588 = LINE('',#589,#590);
+#589 = CARTESIAN_POINT('',(13.5,0.E+000));
+#590 = VECTOR('',#591,1.);
+#591 = DIRECTION('',(0.E+000,-1.));
+#592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#593 = PCURVE('',#245,#594);
+#594 = DEFINITIONAL_REPRESENTATION('',(#595),#599);
+#595 = LINE('',#596,#597);
+#596 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#597 = VECTOR('',#598,1.);
+#598 = DIRECTION('',(0.E+000,-1.));
+#599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#600 = ORIENTED_EDGE('',*,*,#601,.T.);
+#601 = EDGE_CURVE('',#579,#602,#604,.T.);
+#602 = VERTEX_POINT('',#603);
+#603 = CARTESIAN_POINT('',(0.839216,-10.,16.057224));
+#604 = SURFACE_CURVE('',#605,(#609,#616),.PCURVE_S1.);
+#605 = LINE('',#606,#607);
+#606 = CARTESIAN_POINT('',(-2.67911,-10.,16.057224));
+#607 = VECTOR('',#608,1.);
+#608 = DIRECTION('',(1.,0.E+000,0.E+000));
+#609 = PCURVE('',#131,#610);
+#610 = DEFINITIONAL_REPRESENTATION('',(#611),#615);
+#611 = LINE('',#612,#613);
+#612 = CARTESIAN_POINT('',(16.17911,-16.057224));
+#613 = VECTOR('',#614,1.);
+#614 = DIRECTION('',(-1.,-0.E+000));
+#615 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#616 = PCURVE('',#423,#617);
+#617 = DEFINITIONAL_REPRESENTATION('',(#618),#622);
+#618 = LINE('',#619,#620);
+#619 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#620 = VECTOR('',#621,1.);
+#621 = DIRECTION('',(1.,0.E+000));
+#622 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#623 = ORIENTED_EDGE('',*,*,#624,.T.);
+#624 = EDGE_CURVE('',#602,#439,#625,.T.);
+#625 = SURFACE_CURVE('',#626,(#630,#637),.PCURVE_S1.);
+#626 = LINE('',#627,#628);
+#627 = CARTESIAN_POINT('',(0.839216,-10.,16.057224));
+#628 = VECTOR('',#629,1.);
+#629 = DIRECTION('',(-0.193021860293,-2.178689354462E-016,
+    -0.981194456491));
+#630 = PCURVE('',#131,#631);
+#631 = DEFINITIONAL_REPRESENTATION('',(#632),#636);
+#632 = LINE('',#633,#634);
+#633 = CARTESIAN_POINT('',(12.660784,-16.057224));
+#634 = VECTOR('',#635,1.);
+#635 = DIRECTION('',(0.193021860293,0.981194456491));
+#636 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#637 = PCURVE('',#397,#638);
+#638 = DEFINITIONAL_REPRESENTATION('',(#639),#643);
+#639 = LINE('',#640,#641);
+#640 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#641 = VECTOR('',#642,1.);
+#642 = DIRECTION('',(1.,0.E+000));
+#643 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#644 = ORIENTED_EDGE('',*,*,#463,.F.);
+#645 = ADVANCED_FACE('',(#646),#157,.T.);
+#646 = FACE_BOUND('',#647,.T.);
+#647 = EDGE_LOOP('',(#648,#649,#670,#671));
+#648 = ORIENTED_EDGE('',*,*,#336,.T.);
+#649 = ORIENTED_EDGE('',*,*,#650,.T.);
+#650 = EDGE_CURVE('',#314,#489,#651,.T.);
+#651 = SURFACE_CURVE('',#652,(#656,#663),.PCURVE_S1.);
+#652 = LINE('',#653,#654);
+#653 = CARTESIAN_POINT('',(13.5,0.4190705,10.));
+#654 = VECTOR('',#655,1.);
+#655 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#656 = PCURVE('',#157,#657);
+#657 = DEFINITIONAL_REPRESENTATION('',(#658),#662);
+#658 = LINE('',#659,#660);
+#659 = CARTESIAN_POINT('',(-0.4190705,-10.));
+#660 = VECTOR('',#661,1.);
+#661 = DIRECTION('',(1.,0.E+000));
+#662 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#663 = PCURVE('',#189,#664);
+#664 = DEFINITIONAL_REPRESENTATION('',(#665),#669);
+#665 = LINE('',#666,#667);
+#666 = CARTESIAN_POINT('',(8.5,-0.4190705));
+#667 = VECTOR('',#668,1.);
+#668 = DIRECTION('',(0.E+000,-1.));
+#669 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#670 = ORIENTED_EDGE('',*,*,#488,.F.);
+#671 = ORIENTED_EDGE('',*,*,#143,.F.);
+#672 = ADVANCED_FACE('',(#673,#676),#189,.T.);
+#673 = FACE_BOUND('',#674,.T.);
+#674 = EDGE_LOOP('',(#675));
+#675 = ORIENTED_EDGE('',*,*,#172,.F.);
+#676 = FACE_BOUND('',#677,.T.);
+#677 = EDGE_LOOP('',(#678,#679,#700,#701));
+#678 = ORIENTED_EDGE('',*,*,#313,.F.);
+#679 = ORIENTED_EDGE('',*,*,#680,.F.);
+#680 = EDGE_CURVE('',#512,#286,#681,.T.);
+#681 = SURFACE_CURVE('',#682,(#686,#693),.PCURVE_S1.);
+#682 = LINE('',#683,#684);
+#683 = CARTESIAN_POINT('',(5.,-11.193313,10.));
+#684 = VECTOR('',#685,1.);
+#685 = DIRECTION('',(0.E+000,1.,0.E+000));
+#686 = PCURVE('',#189,#687);
+#687 = DEFINITIONAL_REPRESENTATION('',(#688),#692);
+#688 = LINE('',#689,#690);
+#689 = CARTESIAN_POINT('',(0.E+000,-12.031454));
+#690 = VECTOR('',#691,1.);
+#691 = DIRECTION('',(0.E+000,1.));
+#692 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#693 = PCURVE('',#301,#694);
+#694 = DEFINITIONAL_REPRESENTATION('',(#695),#699);
+#695 = LINE('',#696,#697);
+#696 = CARTESIAN_POINT('',(0.E+000,-10.5));
+#697 = VECTOR('',#698,1.);
+#698 = DIRECTION('',(1.,0.E+000));
+#699 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#700 = ORIENTED_EDGE('',*,*,#511,.F.);
+#701 = ORIENTED_EDGE('',*,*,#650,.F.);
+#702 = ADVANCED_FACE('',(#703),#245,.T.);
+#703 = FACE_BOUND('',#704,.T.);
+#704 = EDGE_LOOP('',(#705,#724,#725,#746));
+#705 = ORIENTED_EDGE('',*,*,#706,.F.);
+#706 = EDGE_CURVE('',#230,#558,#707,.T.);
+#707 = SURFACE_CURVE('',#708,(#712,#718),.PCURVE_S1.);
+#708 = LINE('',#709,#710);
+#709 = CARTESIAN_POINT('',(-4.440892098501E-016,-5.,19.221178225716));
+#710 = VECTOR('',#711,1.);
+#711 = DIRECTION('',(0.E+000,-1.,2.22044604925E-016));
+#712 = PCURVE('',#245,#713);
+#713 = DEFINITIONAL_REPRESENTATION('',(#714),#717);
+#714 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#715,#716),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-6.,6.),.PIECEWISE_BEZIER_KNOTS.);
+#715 = CARTESIAN_POINT('',(11.,-19.22117822571));
+#716 = CARTESIAN_POINT('',(-1.,-19.22117822571));
+#717 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#718 = PCURVE('',#273,#719);
+#719 = DEFINITIONAL_REPRESENTATION('',(#720),#723);
+#720 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#721,#722),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-6.,6.),.PIECEWISE_BEZIER_KNOTS.);
+#721 = CARTESIAN_POINT('',(6.648966850622,1.));
+#722 = CARTESIAN_POINT('',(6.648966850622,-11.));
+#723 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#724 = ORIENTED_EDGE('',*,*,#227,.F.);
+#725 = ORIENTED_EDGE('',*,*,#726,.T.);
+#726 = EDGE_CURVE('',#228,#579,#727,.T.);
+#727 = SURFACE_CURVE('',#728,(#732,#739),.PCURVE_S1.);
+#728 = LINE('',#729,#730);
+#729 = CARTESIAN_POINT('',(0.E+000,-10.,16.057224));
+#730 = VECTOR('',#731,1.);
+#731 = DIRECTION('',(0.E+000,-1.,2.22044604925E-016));
+#732 = PCURVE('',#245,#733);
+#733 = DEFINITIONAL_REPRESENTATION('',(#734),#738);
+#734 = LINE('',#735,#736);
+#735 = CARTESIAN_POINT('',(0.E+000,-16.057224));
+#736 = VECTOR('',#737,1.);
+#737 = DIRECTION('',(-1.,-2.22044604925E-016));
+#738 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#739 = PCURVE('',#423,#740);
+#740 = DEFINITIONAL_REPRESENTATION('',(#741),#745);
+#741 = LINE('',#742,#743);
+#742 = CARTESIAN_POINT('',(2.67911,0.E+000));
+#743 = VECTOR('',#744,1.);
+#744 = DIRECTION('',(0.E+000,1.));
+#745 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#746 = ORIENTED_EDGE('',*,*,#578,.T.);
+#747 = ADVANCED_FACE('',(#748),#423,.T.);
+#748 = FACE_BOUND('',#749,.T.);
+#749 = EDGE_LOOP('',(#750,#751,#752,#753));
+#750 = ORIENTED_EDGE('',*,*,#601,.F.);
+#751 = ORIENTED_EDGE('',*,*,#726,.F.);
+#752 = ORIENTED_EDGE('',*,*,#409,.F.);
+#753 = ORIENTED_EDGE('',*,*,#754,.F.);
+#754 = EDGE_CURVE('',#602,#382,#755,.T.);
+#755 = SURFACE_CURVE('',#756,(#760,#767),.PCURVE_S1.);
+#756 = LINE('',#757,#758);
+#757 = CARTESIAN_POINT('',(0.839216,-10.,16.057224));
+#758 = VECTOR('',#759,1.);
+#759 = DIRECTION('',(0.E+000,1.,-2.22044604925E-016));
+#760 = PCURVE('',#423,#761);
+#761 = DEFINITIONAL_REPRESENTATION('',(#762),#766);
+#762 = LINE('',#763,#764);
+#763 = CARTESIAN_POINT('',(3.518326,0.E+000));
+#764 = VECTOR('',#765,1.);
+#765 = DIRECTION('',(0.E+000,-1.));
+#766 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#767 = PCURVE('',#397,#768);
+#768 = DEFINITIONAL_REPRESENTATION('',(#769),#773);
+#769 = LINE('',#770,#771);
+#770 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#771 = VECTOR('',#772,1.);
+#772 = DIRECTION('',(-5.581190904439E-029,-1.));
+#773 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#774 = ADVANCED_FACE('',(#775),#397,.T.);
+#775 = FACE_BOUND('',#776,.T.);
+#776 = EDGE_LOOP('',(#777,#778,#779,#780));
+#777 = ORIENTED_EDGE('',*,*,#624,.F.);
+#778 = ORIENTED_EDGE('',*,*,#754,.T.);
+#779 = ORIENTED_EDGE('',*,*,#381,.F.);
+#780 = ORIENTED_EDGE('',*,*,#438,.F.);
+#781 = ADVANCED_FACE('',(#782),#301,.T.);
+#782 = FACE_BOUND('',#783,.T.);
+#783 = EDGE_LOOP('',(#784,#785,#804,#805));
+#784 = ORIENTED_EDGE('',*,*,#285,.F.);
+#785 = ORIENTED_EDGE('',*,*,#786,.F.);
+#786 = EDGE_CURVE('',#535,#258,#787,.T.);
+#787 = SURFACE_CURVE('',#788,(#792,#798),.PCURVE_S1.);
+#788 = LINE('',#789,#790);
+#789 = CARTESIAN_POINT('',(5.,-5.5966565,20.238596350891));
+#790 = VECTOR('',#791,1.);
+#791 = DIRECTION('',(0.E+000,1.,-2.22044604925E-016));
+#792 = PCURVE('',#301,#793);
+#793 = DEFINITIONAL_REPRESENTATION('',(#794),#797);
+#794 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#795,#796),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-5.4033435,6.5966565),.PIECEWISE_BEZIER_KNOTS.);
+#795 = CARTESIAN_POINT('',(0.193313,-0.261403649109));
+#796 = CARTESIAN_POINT('',(12.193313,-0.261403649109));
+#797 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#798 = PCURVE('',#273,#799);
+#799 = DEFINITIONAL_REPRESENTATION('',(#800),#803);
+#800 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#801,#802),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-5.4033435,6.5966565),.PIECEWISE_BEZIER_KNOTS.);
+#801 = CARTESIAN_POINT('',(1.546502775155,-11.));
+#802 = CARTESIAN_POINT('',(1.546502775155,1.));
+#803 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#804 = ORIENTED_EDGE('',*,*,#534,.F.);
+#805 = ORIENTED_EDGE('',*,*,#680,.T.);
+#806 = ADVANCED_FACE('',(#807),#273,.F.);
+#807 = FACE_BOUND('',#808,.F.);
+#808 = EDGE_LOOP('',(#809,#810,#811,#812));
+#809 = ORIENTED_EDGE('',*,*,#257,.F.);
+#810 = ORIENTED_EDGE('',*,*,#786,.F.);
+#811 = ORIENTED_EDGE('',*,*,#557,.F.);
+#812 = ORIENTED_EDGE('',*,*,#706,.F.);
+#813 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) 
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#817)) GLOBAL_UNIT_ASSIGNED_CONTEXT
+((#814,#815,#816)) REPRESENTATION_CONTEXT('Context #1',
+  '3D Context with UNIT and UNCERTAINTY') );
+#814 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#815 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#816 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#817 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#814,
+  'distance_accuracy_value','confusion accuracy');
+#818 = PRODUCT_TYPE('part',$,(#7));
+#819 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#820)
+  ,#813);
+#820 = STYLED_ITEM('color',(#821),#15);
+#821 = PRESENTATION_STYLE_ASSIGNMENT((#822,#828));
+#822 = SURFACE_STYLE_USAGE(.BOTH.,#823);
+#823 = SURFACE_SIDE_STYLE('',(#824));
+#824 = SURFACE_STYLE_FILL_AREA(#825);
+#825 = FILL_AREA_STYLE('',(#826));
+#826 = FILL_AREA_STYLE_COLOUR('',#827);
+#827 = COLOUR_RGB('',0.800000011921,0.800000011921,0.800000011921);
+#828 = CURVE_STYLE('',#829,POSITIVE_LENGTH_MEASURE(0.1),#827);
+#829 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
+ENDSEC;
+END-ISO-10303-21;

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/mp-1_simulated_steel_bolt.step

@@ -0,0 +1,799 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('FreeCAD Model'),'2;1');
+FILE_NAME(
+'E:/shuty mp1 final (2)/shuty mp1 final/mp-1 step/mp-1 simulated 
+bolt.step','2016-03-26T22:58:36',('Author'),(''),
+  'Open CASCADE STEP processor 6.8','FreeCAD','Unknown');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }'));
+ENDSEC;
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft',
+  'automotive_design',1997,#2);
+#2 = APPLICATION_CONTEXT(
+  'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('Pocket004','Pocket004','',(#8));
+#8 = MECHANICAL_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#631);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#13 = DIRECTION('',(0.E+000,0.E+000,1.));
+#14 = DIRECTION('',(1.,0.E+000,-0.E+000));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#145,#288,#337,#456,#481,#488,#547,#574,#624)
+  );
+#17 = ADVANCED_FACE('',(#18),#33,.T.);
+#18 = FACE_BOUND('',#19,.F.);
+#19 = EDGE_LOOP('',(#20,#60,#88,#121));
+#20 = ORIENTED_EDGE('',*,*,#21,.T.);
+#21 = EDGE_CURVE('',#22,#24,#26,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(6.4,-20.99624966511,5.5));
+#24 = VERTEX_POINT('',#25);
+#25 = CARTESIAN_POINT('',(21.95,0.E+000,5.5));
+#26 = SURFACE_CURVE('',#27,(#32,#44),.PCURVE_S1.);
+#27 = CIRCLE('',#28,21.95);
+#28 = AXIS2_PLACEMENT_3D('',#29,#30,#31);
+#29 = CARTESIAN_POINT('',(0.E+000,0.E+000,5.5));
+#30 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#31 = DIRECTION('',(1.,0.E+000,0.E+000));
+#32 = PCURVE('',#33,#38);
+#33 = CYLINDRICAL_SURFACE('',#34,21.95);
+#34 = AXIS2_PLACEMENT_3D('',#35,#36,#37);
+#35 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#36 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#37 = DIRECTION('',(1.,0.E+000,0.E+000));
+#38 = DEFINITIONAL_REPRESENTATION('',(#39),#43);
+#39 = LINE('',#40,#41);
+#40 = CARTESIAN_POINT('',(-6.28318530718,-5.5));
+#41 = VECTOR('',#42,1.);
+#42 = DIRECTION('',(1.,-0.E+000));
+#43 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#44 = PCURVE('',#45,#50);
+#45 = PLANE('',#46);
+#46 = AXIS2_PLACEMENT_3D('',#47,#48,#49);
+#47 = CARTESIAN_POINT('',(26.379055,0.E+000,5.5));
+#48 = DIRECTION('',(0.E+000,0.E+000,1.));
+#49 = DIRECTION('',(1.,0.E+000,0.E+000));
+#50 = DEFINITIONAL_REPRESENTATION('',(#51),#59);
+#51 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#52,#53,#54,#55,#56,#57,#58),
+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#52 = CARTESIAN_POINT('',(-4.429055,0.E+000));
+#53 = CARTESIAN_POINT('',(-4.429055,-38.01851522613));
+#54 = CARTESIAN_POINT('',(-37.354055,-19.00925761306));
+#55 = CARTESIAN_POINT('',(-70.279055,-5.376199448257E-015));
+#56 = CARTESIAN_POINT('',(-37.354055,19.009257613068));
+#57 = CARTESIAN_POINT('',(-4.429055,38.018515226137));
+#58 = CARTESIAN_POINT('',(-4.429055,0.E+000));
+#59 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#60 = ORIENTED_EDGE('',*,*,#61,.T.);
+#61 = EDGE_CURVE('',#24,#62,#64,.T.);
+#62 = VERTEX_POINT('',#63);
+#63 = CARTESIAN_POINT('',(21.95,0.E+000,56.));
+#64 = SURFACE_CURVE('',#65,(#69,#76),.PCURVE_S1.);
+#65 = LINE('',#66,#67);
+#66 = CARTESIAN_POINT('',(21.95,0.E+000,0.E+000));
+#67 = VECTOR('',#68,1.);
+#68 = DIRECTION('',(0.E+000,0.E+000,1.));
+#69 = PCURVE('',#33,#70);
+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);
+#71 = LINE('',#72,#73);
+#72 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#73 = VECTOR('',#74,1.);
+#74 = DIRECTION('',(-0.E+000,-1.));
+#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#76 = PCURVE('',#77,#82);
+#77 = CYLINDRICAL_SURFACE('',#78,21.95);
+#78 = AXIS2_PLACEMENT_3D('',#79,#80,#81);
+#79 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#80 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#81 = DIRECTION('',(1.,0.E+000,0.E+000));
+#82 = DEFINITIONAL_REPRESENTATION('',(#83),#87);
+#83 = LINE('',#84,#85);
+#84 = CARTESIAN_POINT('',(-6.28318530718,0.E+000));
+#85 = VECTOR('',#86,1.);
+#86 = DIRECTION('',(-0.E+000,-1.));
+#87 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#88 = ORIENTED_EDGE('',*,*,#89,.T.);
+#89 = EDGE_CURVE('',#62,#90,#92,.T.);
+#90 = VERTEX_POINT('',#91);
+#91 = CARTESIAN_POINT('',(6.4,-20.99624966511,56.));
+#92 = SURFACE_CURVE('',#93,(#98,#105),.PCURVE_S1.);
+#93 = CIRCLE('',#94,21.95);
+#94 = AXIS2_PLACEMENT_3D('',#95,#96,#97);
+#95 = CARTESIAN_POINT('',(0.E+000,0.E+000,56.));
+#96 = DIRECTION('',(0.E+000,0.E+000,1.));
+#97 = DIRECTION('',(1.,0.E+000,0.E+000));
+#98 = PCURVE('',#33,#99);
+#99 = DEFINITIONAL_REPRESENTATION('',(#100),#104);
+#100 = LINE('',#101,#102);
+#101 = CARTESIAN_POINT('',(-0.E+000,-56.));
+#102 = VECTOR('',#103,1.);
+#103 = DIRECTION('',(-1.,0.E+000));
+#104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#105 = PCURVE('',#106,#111);
+#106 = PLANE('',#107);
+#107 = AXIS2_PLACEMENT_3D('',#108,#109,#110);
+#108 = CARTESIAN_POINT('',(21.95,0.E+000,56.));
+#109 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#110 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#111 = DEFINITIONAL_REPRESENTATION('',(#112),#120);
+#112 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#113,#114,#115,#116,#117,#118
+,#119),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#113 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#114 = CARTESIAN_POINT('',(0.E+000,38.018515226137));
+#115 = CARTESIAN_POINT('',(32.925,19.009257613068));
+#116 = CARTESIAN_POINT('',(65.85,5.376199448257E-015));
+#117 = CARTESIAN_POINT('',(32.925,-19.00925761306));
+#118 = CARTESIAN_POINT('',(3.552713678801E-014,-38.01851522613));
+#119 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#121 = ORIENTED_EDGE('',*,*,#122,.T.);
+#122 = EDGE_CURVE('',#90,#22,#123,.T.);
+#123 = SURFACE_CURVE('',#124,(#128,#134),.PCURVE_S1.);
+#124 = LINE('',#125,#126);
+#125 = CARTESIAN_POINT('',(6.4,-20.99624966511,0.E+000));
+#126 = VECTOR('',#127,1.);
+#127 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#128 = PCURVE('',#33,#129);
+#129 = DEFINITIONAL_REPRESENTATION('',(#130),#133);
+#130 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#131,#132),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#131 = CARTESIAN_POINT('',(-5.008258558174,-56.0000004));
+#132 = CARTESIAN_POINT('',(-5.008258558174,4.E-007));
+#133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#134 = PCURVE('',#135,#140);
+#135 = PLANE('',#136);
+#136 = AXIS2_PLACEMENT_3D('',#137,#138,#139);
+#137 = CARTESIAN_POINT('',(6.4,-23.496647,56.));
+#138 = DIRECTION('',(1.,0.E+000,0.E+000));
+#139 = DIRECTION('',(0.E+000,1.,0.E+000));
+#140 = DEFINITIONAL_REPRESENTATION('',(#141),#144);
+#141 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#142,#143),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#142 = CARTESIAN_POINT('',(2.500397334881,3.99999997569E-007));
+#143 = CARTESIAN_POINT('',(2.500397334881,-56.0000004));
+#144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#145 = ADVANCED_FACE('',(#146,#222,#257),#45,.F.);
+#146 = FACE_BOUND('',#147,.F.);
+#147 = EDGE_LOOP('',(#148,#149,#170,#196));
+#148 = ORIENTED_EDGE('',*,*,#21,.F.);
+#149 = ORIENTED_EDGE('',*,*,#150,.F.);
+#150 = EDGE_CURVE('',#151,#22,#153,.T.);
+#151 = VERTEX_POINT('',#152);
+#152 = CARTESIAN_POINT('',(6.4,-1.45,5.5));
+#153 = SURFACE_CURVE('',#154,(#158,#164),.PCURVE_S1.);
+#154 = LINE('',#155,#156);
+#155 = CARTESIAN_POINT('',(6.4,-11.7483235,5.5));
+#156 = VECTOR('',#157,1.);
+#157 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#158 = PCURVE('',#45,#159);
+#159 = DEFINITIONAL_REPRESENTATION('',(#160),#163);
+#160 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#161,#162),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-12.25294846651,11.202551131631),.PIECEWISE_BEZIER_KNOTS.);
+#161 = CARTESIAN_POINT('',(-19.979055,0.504624966512));
+#162 = CARTESIAN_POINT('',(-19.979055,-22.95087463163));
+#163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#164 = PCURVE('',#135,#165);
+#165 = DEFINITIONAL_REPRESENTATION('',(#166),#169);
+#166 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#167,#168),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-12.25294846651,11.202551131631),.PIECEWISE_BEZIER_KNOTS.);
+#167 = CARTESIAN_POINT('',(24.001271966512,-50.5));
+#168 = CARTESIAN_POINT('',(0.545772368369,-50.5));
+#169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#170 = ORIENTED_EDGE('',*,*,#171,.F.);
+#171 = EDGE_CURVE('',#172,#151,#174,.T.);
+#172 = VERTEX_POINT('',#173);
+#173 = CARTESIAN_POINT('',(21.902054698133,-1.45,5.5));
+#174 = SURFACE_CURVE('',#175,(#179,#185),.PCURVE_S1.);
+#175 = LINE('',#176,#177);
+#176 = CARTESIAN_POINT('',(16.3895275,-1.45,5.5));
+#177 = VECTOR('',#178,1.);
+#178 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#179 = PCURVE('',#45,#180);
+#180 = DEFINITIONAL_REPRESENTATION('',(#181),#184);
+#181 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182,#183),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-7.062732667946,11.539732969813),.PIECEWISE_BEZIER_KNOTS.);
+#182 = CARTESIAN_POINT('',(-2.926794832054,-1.45));
+#183 = CARTESIAN_POINT('',(-21.52926046981,-1.45));
+#184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#185 = PCURVE('',#186,#191);
+#186 = PLANE('',#187);
+#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190);
+#188 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#189 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#190 = DIRECTION('',(1.,0.E+000,0.E+000));
+#191 = DEFINITIONAL_REPRESENTATION('',(#192),#195);
+#192 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#193,#194),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-7.062732667946,11.539732969813),.PIECEWISE_BEZIER_KNOTS.);
+#193 = CARTESIAN_POINT('',(17.052260167946,-50.5));
+#194 = CARTESIAN_POINT('',(-1.550205469813,-50.5));
+#195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#196 = ORIENTED_EDGE('',*,*,#197,.F.);
+#197 = EDGE_CURVE('',#24,#172,#198,.T.);
+#198 = SURFACE_CURVE('',#199,(#204,#215),.PCURVE_S1.);
+#199 = CIRCLE('',#200,21.95);
+#200 = AXIS2_PLACEMENT_3D('',#201,#202,#203);
+#201 = CARTESIAN_POINT('',(0.E+000,0.E+000,5.5));
+#202 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#203 = DIRECTION('',(1.,0.E+000,0.E+000));
+#204 = PCURVE('',#45,#205);
+#205 = DEFINITIONAL_REPRESENTATION('',(#206),#214);
+#206 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#207,#208,#209,#210,#211,#212
+,#213),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#207 = CARTESIAN_POINT('',(-4.429055,0.E+000));
+#208 = CARTESIAN_POINT('',(-4.429055,-38.01851522613));
+#209 = CARTESIAN_POINT('',(-37.354055,-19.00925761306));
+#210 = CARTESIAN_POINT('',(-70.279055,-5.376199448257E-015));
+#211 = CARTESIAN_POINT('',(-37.354055,19.009257613068));
+#212 = CARTESIAN_POINT('',(-4.429055,38.018515226137));
+#213 = CARTESIAN_POINT('',(-4.429055,0.E+000));
+#214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#215 = PCURVE('',#77,#216);
+#216 = DEFINITIONAL_REPRESENTATION('',(#217),#221);
+#217 = LINE('',#218,#219);
+#218 = CARTESIAN_POINT('',(-6.28318530718,-5.5));
+#219 = VECTOR('',#220,1.);
+#220 = DIRECTION('',(1.,-0.E+000));
+#221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#222 = FACE_BOUND('',#223,.F.);
+#223 = EDGE_LOOP('',(#224));
+#224 = ORIENTED_EDGE('',*,*,#225,.T.);
+#225 = EDGE_CURVE('',#226,#226,#228,.T.);
+#226 = VERTEX_POINT('',#227);
+#227 = CARTESIAN_POINT('',(6.375,12.65,5.5));
+#228 = SURFACE_CURVE('',#229,(#234,#245),.PCURVE_S1.);
+#229 = CIRCLE('',#230,6.375);
+#230 = AXIS2_PLACEMENT_3D('',#231,#232,#233);
+#231 = CARTESIAN_POINT('',(0.E+000,12.65,5.5));
+#232 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#233 = DIRECTION('',(1.,0.E+000,0.E+000));
+#234 = PCURVE('',#45,#235);
+#235 = DEFINITIONAL_REPRESENTATION('',(#236),#244);
+#236 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#237,#238,#239,#240,#241,#242
+,#243),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#237 = CARTESIAN_POINT('',(-20.004055,12.65));
+#238 = CARTESIAN_POINT('',(-20.004055,1.608176101748));
+#239 = CARTESIAN_POINT('',(-29.566555,7.129088050874));
+#240 = CARTESIAN_POINT('',(-39.129055,12.65));
+#241 = CARTESIAN_POINT('',(-29.566555,18.170911949126));
+#242 = CARTESIAN_POINT('',(-20.004055,23.691823898252));
+#243 = CARTESIAN_POINT('',(-20.004055,12.65));
+#244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#245 = PCURVE('',#246,#251);
+#246 = CYLINDRICAL_SURFACE('',#247,6.375);
+#247 = AXIS2_PLACEMENT_3D('',#248,#249,#250);
+#248 = CARTESIAN_POINT('',(0.E+000,12.65,0.E+000));
+#249 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#250 = DIRECTION('',(1.,0.E+000,0.E+000));
+#251 = DEFINITIONAL_REPRESENTATION('',(#252),#256);
+#252 = LINE('',#253,#254);
+#253 = CARTESIAN_POINT('',(0.E+000,-5.5));
+#254 = VECTOR('',#255,1.);
+#255 = DIRECTION('',(1.,0.E+000));
+#256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#257 = FACE_BOUND('',#258,.F.);
+#258 = EDGE_LOOP('',(#259));
+#259 = ORIENTED_EDGE('',*,*,#260,.F.);
+#260 = EDGE_CURVE('',#261,#261,#263,.T.);
+#261 = VERTEX_POINT('',#262);
+#262 = CARTESIAN_POINT('',(1.75,-16.7,5.5));
+#263 = SURFACE_CURVE('',#264,(#269,#276),.PCURVE_S1.);
+#264 = CIRCLE('',#265,1.75);
+#265 = AXIS2_PLACEMENT_3D('',#266,#267,#268);
+#266 = CARTESIAN_POINT('',(0.E+000,-16.7,5.5));
+#267 = DIRECTION('',(0.E+000,0.E+000,1.));
+#268 = DIRECTION('',(1.,0.E+000,0.E+000));
+#269 = PCURVE('',#45,#270);
+#270 = DEFINITIONAL_REPRESENTATION('',(#271),#275);
+#271 = CIRCLE('',#272,1.75);
+#272 = AXIS2_PLACEMENT_2D('',#273,#274);
+#273 = CARTESIAN_POINT('',(-26.379055,-16.7));
+#274 = DIRECTION('',(1.,0.E+000));
+#275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#276 = PCURVE('',#277,#282);
+#277 = CYLINDRICAL_SURFACE('',#278,1.75);
+#278 = AXIS2_PLACEMENT_3D('',#279,#280,#281);
+#279 = CARTESIAN_POINT('',(0.E+000,-16.7,56.));
+#280 = DIRECTION('',(0.E+000,0.E+000,1.));
+#281 = DIRECTION('',(1.,0.E+000,0.E+000));
+#282 = DEFINITIONAL_REPRESENTATION('',(#283),#287);
+#283 = LINE('',#284,#285);
+#284 = CARTESIAN_POINT('',(0.E+000,-50.5));
+#285 = VECTOR('',#286,1.);
+#286 = DIRECTION('',(1.,0.E+000));
+#287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#288 = ADVANCED_FACE('',(#289),#135,.T.);
+#289 = FACE_BOUND('',#290,.T.);
+#290 = EDGE_LOOP('',(#291,#314,#315,#316));
+#291 = ORIENTED_EDGE('',*,*,#292,.F.);
+#292 = EDGE_CURVE('',#90,#293,#295,.T.);
+#293 = VERTEX_POINT('',#294);
+#294 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#295 = SURFACE_CURVE('',#296,(#300,#307),.PCURVE_S1.);
+#296 = LINE('',#297,#298);
+#297 = CARTESIAN_POINT('',(6.4,-23.496647,56.));
+#298 = VECTOR('',#299,1.);
+#299 = DIRECTION('',(0.E+000,1.,0.E+000));
+#300 = PCURVE('',#135,#301);
+#301 = DEFINITIONAL_REPRESENTATION('',(#302),#306);
+#302 = LINE('',#303,#304);
+#303 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#304 = VECTOR('',#305,1.);
+#305 = DIRECTION('',(1.,0.E+000));
+#306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#307 = PCURVE('',#106,#308);
+#308 = DEFINITIONAL_REPRESENTATION('',(#309),#313);
+#309 = LINE('',#310,#311);
+#310 = CARTESIAN_POINT('',(15.55,-23.496647));
+#311 = VECTOR('',#312,1.);
+#312 = DIRECTION('',(0.E+000,1.));
+#313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#314 = ORIENTED_EDGE('',*,*,#122,.T.);
+#315 = ORIENTED_EDGE('',*,*,#150,.F.);
+#316 = ORIENTED_EDGE('',*,*,#317,.F.);
+#317 = EDGE_CURVE('',#293,#151,#318,.T.);
+#318 = SURFACE_CURVE('',#319,(#323,#330),.PCURVE_S1.);
+#319 = LINE('',#320,#321);
+#320 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#321 = VECTOR('',#322,1.);
+#322 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#323 = PCURVE('',#135,#324);
+#324 = DEFINITIONAL_REPRESENTATION('',(#325),#329);
+#325 = LINE('',#326,#327);
+#326 = CARTESIAN_POINT('',(22.046647,0.E+000));
+#327 = VECTOR('',#328,1.);
+#328 = DIRECTION('',(0.E+000,-1.));
+#329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#330 = PCURVE('',#186,#331);
+#331 = DEFINITIONAL_REPRESENTATION('',(#332),#336);
+#332 = LINE('',#333,#334);
+#333 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#334 = VECTOR('',#335,1.);
+#335 = DIRECTION('',(0.E+000,-1.));
+#336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#337 = ADVANCED_FACE('',(#338,#391,#421),#106,.F.);
+#338 = FACE_BOUND('',#339,.F.);
+#339 = EDGE_LOOP('',(#340,#341,#369,#390));
+#340 = ORIENTED_EDGE('',*,*,#89,.F.);
+#341 = ORIENTED_EDGE('',*,*,#342,.F.);
+#342 = EDGE_CURVE('',#343,#62,#345,.T.);
+#343 = VERTEX_POINT('',#344);
+#344 = CARTESIAN_POINT('',(21.902054698133,-1.45,56.));
+#345 = SURFACE_CURVE('',#346,(#351,#362),.PCURVE_S1.);
+#346 = CIRCLE('',#347,21.95);
+#347 = AXIS2_PLACEMENT_3D('',#348,#349,#350);
+#348 = CARTESIAN_POINT('',(0.E+000,0.E+000,56.));
+#349 = DIRECTION('',(0.E+000,0.E+000,1.));
+#350 = DIRECTION('',(1.,0.E+000,0.E+000));
+#351 = PCURVE('',#106,#352);
+#352 = DEFINITIONAL_REPRESENTATION('',(#353),#361);
+#353 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#354,#355,#356,#357,#358,#359
+,#360),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#354 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#355 = CARTESIAN_POINT('',(0.E+000,38.018515226137));
+#356 = CARTESIAN_POINT('',(32.925,19.009257613068));
+#357 = CARTESIAN_POINT('',(65.85,5.376199448257E-015));
+#358 = CARTESIAN_POINT('',(32.925,-19.00925761306));
+#359 = CARTESIAN_POINT('',(3.552713678801E-014,-38.01851522613));
+#360 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#362 = PCURVE('',#77,#363);
+#363 = DEFINITIONAL_REPRESENTATION('',(#364),#368);
+#364 = LINE('',#365,#366);
+#365 = CARTESIAN_POINT('',(-0.E+000,-56.));
+#366 = VECTOR('',#367,1.);
+#367 = DIRECTION('',(-1.,0.E+000));
+#368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#369 = ORIENTED_EDGE('',*,*,#370,.F.);
+#370 = EDGE_CURVE('',#293,#343,#371,.T.);
+#371 = SURFACE_CURVE('',#372,(#376,#383),.PCURVE_S1.);
+#372 = LINE('',#373,#374);
+#373 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#374 = VECTOR('',#375,1.);
+#375 = DIRECTION('',(1.,0.E+000,0.E+000));
+#376 = PCURVE('',#106,#377);
+#377 = DEFINITIONAL_REPRESENTATION('',(#378),#382);
+#378 = LINE('',#379,#380);
+#379 = CARTESIAN_POINT('',(15.55,-1.45));
+#380 = VECTOR('',#381,1.);
+#381 = DIRECTION('',(-1.,0.E+000));
+#382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#383 = PCURVE('',#186,#384);
+#384 = DEFINITIONAL_REPRESENTATION('',(#385),#389);
+#385 = LINE('',#386,#387);
+#386 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#387 = VECTOR('',#388,1.);
+#388 = DIRECTION('',(1.,0.E+000));
+#389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#390 = ORIENTED_EDGE('',*,*,#292,.F.);
+#391 = FACE_BOUND('',#392,.F.);
+#392 = EDGE_LOOP('',(#393));
+#393 = ORIENTED_EDGE('',*,*,#394,.T.);
+#394 = EDGE_CURVE('',#395,#395,#397,.T.);
+#395 = VERTEX_POINT('',#396);
+#396 = CARTESIAN_POINT('',(1.75,-16.7,56.));
+#397 = SURFACE_CURVE('',#398,(#403,#414),.PCURVE_S1.);
+#398 = CIRCLE('',#399,1.75);
+#399 = AXIS2_PLACEMENT_3D('',#400,#401,#402);
+#400 = CARTESIAN_POINT('',(0.E+000,-16.7,56.));
+#401 = DIRECTION('',(0.E+000,0.E+000,1.));
+#402 = DIRECTION('',(1.,0.E+000,0.E+000));
+#403 = PCURVE('',#106,#404);
+#404 = DEFINITIONAL_REPRESENTATION('',(#405),#413);
+#405 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#406,#407,#408,#409,#410,#411
+,#412),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#406 = CARTESIAN_POINT('',(20.2,-16.7));
+#407 = CARTESIAN_POINT('',(20.2,-13.66891108675));
+#408 = CARTESIAN_POINT('',(22.825,-15.18445554337));
+#409 = CARTESIAN_POINT('',(25.45,-16.7));
+#410 = CARTESIAN_POINT('',(22.825,-18.21554445662));
+#411 = CARTESIAN_POINT('',(20.2,-19.73108891324));
+#412 = CARTESIAN_POINT('',(20.2,-16.7));
+#413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#414 = PCURVE('',#277,#415);
+#415 = DEFINITIONAL_REPRESENTATION('',(#416),#420);
+#416 = LINE('',#417,#418);
+#417 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#418 = VECTOR('',#419,1.);
+#419 = DIRECTION('',(1.,0.E+000));
+#420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#421 = FACE_BOUND('',#422,.F.);
+#422 = EDGE_LOOP('',(#423));
+#423 = ORIENTED_EDGE('',*,*,#424,.T.);
+#424 = EDGE_CURVE('',#425,#425,#427,.T.);
+#425 = VERTEX_POINT('',#426);
+#426 = CARTESIAN_POINT('',(3.925,12.65,56.));
+#427 = SURFACE_CURVE('',#428,(#433,#444),.PCURVE_S1.);
+#428 = CIRCLE('',#429,3.925);
+#429 = AXIS2_PLACEMENT_3D('',#430,#431,#432);
+#430 = CARTESIAN_POINT('',(0.E+000,12.65,56.));
+#431 = DIRECTION('',(0.E+000,0.E+000,1.));
+#432 = DIRECTION('',(1.,0.E+000,0.E+000));
+#433 = PCURVE('',#106,#434);
+#434 = DEFINITIONAL_REPRESENTATION('',(#435),#443);
+#435 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#436,#437,#438,#439,#440,#441
+,#442),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#436 = CARTESIAN_POINT('',(18.025,12.65));
+#437 = CARTESIAN_POINT('',(18.025,19.448299419708));
+#438 = CARTESIAN_POINT('',(23.9125,16.049149709854));
+#439 = CARTESIAN_POINT('',(29.8,12.65));
+#440 = CARTESIAN_POINT('',(23.9125,9.250850290146));
+#441 = CARTESIAN_POINT('',(18.025,5.851700580292));
+#442 = CARTESIAN_POINT('',(18.025,12.65));
+#443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#444 = PCURVE('',#445,#450);
+#445 = CYLINDRICAL_SURFACE('',#446,3.925);
+#446 = AXIS2_PLACEMENT_3D('',#447,#448,#449);
+#447 = CARTESIAN_POINT('',(0.E+000,12.65,56.));
+#448 = DIRECTION('',(0.E+000,0.E+000,1.));
+#449 = DIRECTION('',(1.,0.E+000,0.E+000));
+#450 = DEFINITIONAL_REPRESENTATION('',(#451),#455);
+#451 = LINE('',#452,#453);
+#452 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#453 = VECTOR('',#454,1.);
+#454 = DIRECTION('',(1.,0.E+000));
+#455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#456 = ADVANCED_FACE('',(#457),#77,.T.);
+#457 = FACE_BOUND('',#458,.F.);
+#458 = EDGE_LOOP('',(#459,#460,#461,#480));
+#459 = ORIENTED_EDGE('',*,*,#61,.F.);
+#460 = ORIENTED_EDGE('',*,*,#197,.T.);
+#461 = ORIENTED_EDGE('',*,*,#462,.F.);
+#462 = EDGE_CURVE('',#343,#172,#463,.T.);
+#463 = SURFACE_CURVE('',#464,(#468,#474),.PCURVE_S1.);
+#464 = LINE('',#465,#466);
+#465 = CARTESIAN_POINT('',(21.902054698133,-1.45,0.E+000));
+#466 = VECTOR('',#467,1.);
+#467 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#468 = PCURVE('',#77,#469);
+#469 = DEFINITIONAL_REPRESENTATION('',(#470),#473);
+#470 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#471,#472),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#471 = CARTESIAN_POINT('',(-6.217077941965,-56.0000004));
+#472 = CARTESIAN_POINT('',(-6.217077941965,4.E-007));
+#473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#474 = PCURVE('',#186,#475);
+#475 = DEFINITIONAL_REPRESENTATION('',(#476),#479);
+#476 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#477,#478),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#477 = CARTESIAN_POINT('',(15.502054698133,3.99999997569E-007));
+#478 = CARTESIAN_POINT('',(15.502054698133,-56.0000004));
+#479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#480 = ORIENTED_EDGE('',*,*,#342,.T.);
+#481 = ADVANCED_FACE('',(#482),#186,.T.);
+#482 = FACE_BOUND('',#483,.T.);
+#483 = EDGE_LOOP('',(#484,#485,#486,#487));
+#484 = ORIENTED_EDGE('',*,*,#370,.F.);
+#485 = ORIENTED_EDGE('',*,*,#317,.T.);
+#486 = ORIENTED_EDGE('',*,*,#171,.F.);
+#487 = ORIENTED_EDGE('',*,*,#462,.F.);
+#488 = ADVANCED_FACE('',(#489),#246,.F.);
+#489 = FACE_BOUND('',#490,.F.);
+#490 = EDGE_LOOP('',(#491,#492,#515,#546));
+#491 = ORIENTED_EDGE('',*,*,#225,.F.);
+#492 = ORIENTED_EDGE('',*,*,#493,.T.);
+#493 = EDGE_CURVE('',#226,#494,#496,.T.);
+#494 = VERTEX_POINT('',#495);
+#495 = CARTESIAN_POINT('',(6.375,12.65,16.));
+#496 = SEAM_CURVE('',#497,(#501,#508),.PCURVE_S1.);
+#497 = LINE('',#498,#499);
+#498 = CARTESIAN_POINT('',(6.375,12.65,0.E+000));
+#499 = VECTOR('',#500,1.);
+#500 = DIRECTION('',(0.E+000,0.E+000,1.));
+#501 = PCURVE('',#246,#502);
+#502 = DEFINITIONAL_REPRESENTATION('',(#503),#507);
+#503 = LINE('',#504,#505);
+#504 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#505 = VECTOR('',#506,1.);
+#506 = DIRECTION('',(0.E+000,-1.));
+#507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#508 = PCURVE('',#246,#509);
+#509 = DEFINITIONAL_REPRESENTATION('',(#510),#514);
+#510 = LINE('',#511,#512);
+#511 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#512 = VECTOR('',#513,1.);
+#513 = DIRECTION('',(0.E+000,-1.));
+#514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#515 = ORIENTED_EDGE('',*,*,#516,.T.);
+#516 = EDGE_CURVE('',#494,#494,#517,.T.);
+#517 = SURFACE_CURVE('',#518,(#523,#530),.PCURVE_S1.);
+#518 = CIRCLE('',#519,6.375);
+#519 = AXIS2_PLACEMENT_3D('',#520,#521,#522);
+#520 = CARTESIAN_POINT('',(0.E+000,12.65,16.));
+#521 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#522 = DIRECTION('',(1.,0.E+000,0.E+000));
+#523 = PCURVE('',#246,#524);
+#524 = DEFINITIONAL_REPRESENTATION('',(#525),#529);
+#525 = LINE('',#526,#527);
+#526 = CARTESIAN_POINT('',(0.E+000,-16.));
+#527 = VECTOR('',#528,1.);
+#528 = DIRECTION('',(1.,0.E+000));
+#529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#530 = PCURVE('',#531,#536);
+#531 = PLANE('',#532);
+#532 = AXIS2_PLACEMENT_3D('',#533,#534,#535);
+#533 = CARTESIAN_POINT('',(6.375,12.65,16.));
+#534 = DIRECTION('',(0.E+000,0.E+000,1.));
+#535 = DIRECTION('',(1.,0.E+000,0.E+000));
+#536 = DEFINITIONAL_REPRESENTATION('',(#537),#545);
+#537 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#538,#539,#540,#541,#542,#543
+,#544),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#538 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#539 = CARTESIAN_POINT('',(0.E+000,-11.04182389825));
+#540 = CARTESIAN_POINT('',(-9.5625,-5.520911949126));
+#541 = CARTESIAN_POINT('',(-19.125,-1.561424668913E-015));
+#542 = CARTESIAN_POINT('',(-9.5625,5.520911949126));
+#543 = CARTESIAN_POINT('',(-1.06581410364E-014,11.041823898252));
+#544 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#546 = ORIENTED_EDGE('',*,*,#493,.F.);
+#547 = ADVANCED_FACE('',(#548),#277,.F.);
+#548 = FACE_BOUND('',#549,.F.);
+#549 = EDGE_LOOP('',(#550,#571,#572,#573));
+#550 = ORIENTED_EDGE('',*,*,#551,.F.);
+#551 = EDGE_CURVE('',#395,#261,#552,.T.);
+#552 = SEAM_CURVE('',#553,(#557,#564),.PCURVE_S1.);
+#553 = LINE('',#554,#555);
+#554 = CARTESIAN_POINT('',(1.75,-16.7,56.));
+#555 = VECTOR('',#556,1.);
+#556 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#557 = PCURVE('',#277,#558);
+#558 = DEFINITIONAL_REPRESENTATION('',(#559),#563);
+#559 = LINE('',#560,#561);
+#560 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#561 = VECTOR('',#562,1.);
+#562 = DIRECTION('',(0.E+000,-1.));
+#563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#564 = PCURVE('',#277,#565);
+#565 = DEFINITIONAL_REPRESENTATION('',(#566),#570);
+#566 = LINE('',#567,#568);
+#567 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#568 = VECTOR('',#569,1.);
+#569 = DIRECTION('',(0.E+000,-1.));
+#570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#571 = ORIENTED_EDGE('',*,*,#394,.F.);
+#572 = ORIENTED_EDGE('',*,*,#551,.T.);
+#573 = ORIENTED_EDGE('',*,*,#260,.T.);
+#574 = ADVANCED_FACE('',(#575),#445,.F.);
+#575 = FACE_BOUND('',#576,.F.);
+#576 = EDGE_LOOP('',(#577,#600,#601,#602));
+#577 = ORIENTED_EDGE('',*,*,#578,.F.);
+#578 = EDGE_CURVE('',#425,#579,#581,.T.);
+#579 = VERTEX_POINT('',#580);
+#580 = CARTESIAN_POINT('',(3.925,12.65,16.));
+#581 = SEAM_CURVE('',#582,(#586,#593),.PCURVE_S1.);
+#582 = LINE('',#583,#584);
+#583 = CARTESIAN_POINT('',(3.925,12.65,56.));
+#584 = VECTOR('',#585,1.);
+#585 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#586 = PCURVE('',#445,#587);
+#587 = DEFINITIONAL_REPRESENTATION('',(#588),#592);
+#588 = LINE('',#589,#590);
+#589 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#590 = VECTOR('',#591,1.);
+#591 = DIRECTION('',(0.E+000,-1.));
+#592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#593 = PCURVE('',#445,#594);
+#594 = DEFINITIONAL_REPRESENTATION('',(#595),#599);
+#595 = LINE('',#596,#597);
+#596 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#597 = VECTOR('',#598,1.);
+#598 = DIRECTION('',(0.E+000,-1.));
+#599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#600 = ORIENTED_EDGE('',*,*,#424,.F.);
+#601 = ORIENTED_EDGE('',*,*,#578,.T.);
+#602 = ORIENTED_EDGE('',*,*,#603,.T.);
+#603 = EDGE_CURVE('',#579,#579,#604,.T.);
+#604 = SURFACE_CURVE('',#605,(#610,#617),.PCURVE_S1.);
+#605 = CIRCLE('',#606,3.925);
+#606 = AXIS2_PLACEMENT_3D('',#607,#608,#609);
+#607 = CARTESIAN_POINT('',(0.E+000,12.65,16.));
+#608 = DIRECTION('',(0.E+000,0.E+000,1.));
+#609 = DIRECTION('',(1.,0.E+000,0.E+000));
+#610 = PCURVE('',#445,#611);
+#611 = DEFINITIONAL_REPRESENTATION('',(#612),#616);
+#612 = LINE('',#613,#614);
+#613 = CARTESIAN_POINT('',(0.E+000,-40.));
+#614 = VECTOR('',#615,1.);
+#615 = DIRECTION('',(1.,0.E+000));
+#616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#617 = PCURVE('',#531,#618);
+#618 = DEFINITIONAL_REPRESENTATION('',(#619),#623);
+#619 = CIRCLE('',#620,3.925);
+#620 = AXIS2_PLACEMENT_2D('',#621,#622);
+#621 = CARTESIAN_POINT('',(-6.375,0.E+000));
+#622 = DIRECTION('',(1.,0.E+000));
+#623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#624 = ADVANCED_FACE('',(#625,#628),#531,.F.);
+#625 = FACE_BOUND('',#626,.F.);
+#626 = EDGE_LOOP('',(#627));
+#627 = ORIENTED_EDGE('',*,*,#516,.F.);
+#628 = FACE_BOUND('',#629,.F.);
+#629 = EDGE_LOOP('',(#630));
+#630 = ORIENTED_EDGE('',*,*,#603,.F.);
+#631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) 
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#635)) GLOBAL_UNIT_ASSIGNED_CONTEXT
+((#632,#633,#634)) REPRESENTATION_CONTEXT('Context #1',
+  '3D Context with UNIT and UNCERTAINTY') );
+#632 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#633 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#634 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#635 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#632,
+  'distance_accuracy_value','confusion accuracy');
+#636 = PRODUCT_TYPE('part',$,(#7));
+#637 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#638)
+  ,#631);
+#638 = STYLED_ITEM('color',(#639),#15);
+#639 = PRESENTATION_STYLE_ASSIGNMENT((#640,#646));
+#640 = SURFACE_STYLE_USAGE(.BOTH.,#641);
+#641 = SURFACE_SIDE_STYLE('',(#642));
+#642 = SURFACE_STYLE_FILL_AREA(#643);
+#643 = FILL_AREA_STYLE('',(#644));
+#644 = FILL_AREA_STYLE_COLOUR('',#645);
+#645 = COLOUR_RGB('',0.800000011921,0.800000011921,0.800000011921);
+#646 = CURVE_STYLE('',#647,POSITIVE_LENGTH_MEASURE(0.1),#645);
+#647 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
+ENDSEC;
+END-ISO-10303-21;

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/simulated_steel_bolt.step

@@ -0,0 +1,799 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('FreeCAD Model'),'2;1');
+FILE_NAME(
+'E:/shuty mp1 final (2)/shuty mp1 final/mp-1 step/simulated steel 
+bolt.step','2016-03-27T03:04:56',('Author'),(''),
+  'Open CASCADE STEP processor 6.8','FreeCAD','Unknown');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }'));
+ENDSEC;
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft',
+  'automotive_design',1997,#2);
+#2 = APPLICATION_CONTEXT(
+  'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('Pocket004','Pocket004','',(#8));
+#8 = MECHANICAL_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#631);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#13 = DIRECTION('',(0.E+000,0.E+000,1.));
+#14 = DIRECTION('',(1.,0.E+000,-0.E+000));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#145,#288,#337,#456,#481,#488,#547,#574,#624)
+  );
+#17 = ADVANCED_FACE('',(#18),#33,.T.);
+#18 = FACE_BOUND('',#19,.F.);
+#19 = EDGE_LOOP('',(#20,#60,#88,#121));
+#20 = ORIENTED_EDGE('',*,*,#21,.T.);
+#21 = EDGE_CURVE('',#22,#24,#26,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(6.4,-20.99624966511,5.5));
+#24 = VERTEX_POINT('',#25);
+#25 = CARTESIAN_POINT('',(21.95,0.E+000,5.5));
+#26 = SURFACE_CURVE('',#27,(#32,#44),.PCURVE_S1.);
+#27 = CIRCLE('',#28,21.95);
+#28 = AXIS2_PLACEMENT_3D('',#29,#30,#31);
+#29 = CARTESIAN_POINT('',(0.E+000,0.E+000,5.5));
+#30 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#31 = DIRECTION('',(1.,0.E+000,0.E+000));
+#32 = PCURVE('',#33,#38);
+#33 = CYLINDRICAL_SURFACE('',#34,21.95);
+#34 = AXIS2_PLACEMENT_3D('',#35,#36,#37);
+#35 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#36 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#37 = DIRECTION('',(1.,0.E+000,0.E+000));
+#38 = DEFINITIONAL_REPRESENTATION('',(#39),#43);
+#39 = LINE('',#40,#41);
+#40 = CARTESIAN_POINT('',(-6.28318530718,-5.5));
+#41 = VECTOR('',#42,1.);
+#42 = DIRECTION('',(1.,-0.E+000));
+#43 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#44 = PCURVE('',#45,#50);
+#45 = PLANE('',#46);
+#46 = AXIS2_PLACEMENT_3D('',#47,#48,#49);
+#47 = CARTESIAN_POINT('',(26.379055,0.E+000,5.5));
+#48 = DIRECTION('',(0.E+000,0.E+000,1.));
+#49 = DIRECTION('',(1.,0.E+000,0.E+000));
+#50 = DEFINITIONAL_REPRESENTATION('',(#51),#59);
+#51 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#52,#53,#54,#55,#56,#57,#58),
+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#52 = CARTESIAN_POINT('',(-4.429055,0.E+000));
+#53 = CARTESIAN_POINT('',(-4.429055,-38.01851522613));
+#54 = CARTESIAN_POINT('',(-37.354055,-19.00925761306));
+#55 = CARTESIAN_POINT('',(-70.279055,-5.376199448257E-015));
+#56 = CARTESIAN_POINT('',(-37.354055,19.009257613068));
+#57 = CARTESIAN_POINT('',(-4.429055,38.018515226137));
+#58 = CARTESIAN_POINT('',(-4.429055,0.E+000));
+#59 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#60 = ORIENTED_EDGE('',*,*,#61,.T.);
+#61 = EDGE_CURVE('',#24,#62,#64,.T.);
+#62 = VERTEX_POINT('',#63);
+#63 = CARTESIAN_POINT('',(21.95,0.E+000,56.));
+#64 = SURFACE_CURVE('',#65,(#69,#76),.PCURVE_S1.);
+#65 = LINE('',#66,#67);
+#66 = CARTESIAN_POINT('',(21.95,0.E+000,0.E+000));
+#67 = VECTOR('',#68,1.);
+#68 = DIRECTION('',(0.E+000,0.E+000,1.));
+#69 = PCURVE('',#33,#70);
+#70 = DEFINITIONAL_REPRESENTATION('',(#71),#75);
+#71 = LINE('',#72,#73);
+#72 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#73 = VECTOR('',#74,1.);
+#74 = DIRECTION('',(-0.E+000,-1.));
+#75 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#76 = PCURVE('',#77,#82);
+#77 = CYLINDRICAL_SURFACE('',#78,21.95);
+#78 = AXIS2_PLACEMENT_3D('',#79,#80,#81);
+#79 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#80 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#81 = DIRECTION('',(1.,0.E+000,0.E+000));
+#82 = DEFINITIONAL_REPRESENTATION('',(#83),#87);
+#83 = LINE('',#84,#85);
+#84 = CARTESIAN_POINT('',(-6.28318530718,0.E+000));
+#85 = VECTOR('',#86,1.);
+#86 = DIRECTION('',(-0.E+000,-1.));
+#87 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#88 = ORIENTED_EDGE('',*,*,#89,.T.);
+#89 = EDGE_CURVE('',#62,#90,#92,.T.);
+#90 = VERTEX_POINT('',#91);
+#91 = CARTESIAN_POINT('',(6.4,-20.99624966511,56.));
+#92 = SURFACE_CURVE('',#93,(#98,#105),.PCURVE_S1.);
+#93 = CIRCLE('',#94,21.95);
+#94 = AXIS2_PLACEMENT_3D('',#95,#96,#97);
+#95 = CARTESIAN_POINT('',(0.E+000,0.E+000,56.));
+#96 = DIRECTION('',(0.E+000,0.E+000,1.));
+#97 = DIRECTION('',(1.,0.E+000,0.E+000));
+#98 = PCURVE('',#33,#99);
+#99 = DEFINITIONAL_REPRESENTATION('',(#100),#104);
+#100 = LINE('',#101,#102);
+#101 = CARTESIAN_POINT('',(-0.E+000,-56.));
+#102 = VECTOR('',#103,1.);
+#103 = DIRECTION('',(-1.,0.E+000));
+#104 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#105 = PCURVE('',#106,#111);
+#106 = PLANE('',#107);
+#107 = AXIS2_PLACEMENT_3D('',#108,#109,#110);
+#108 = CARTESIAN_POINT('',(21.95,0.E+000,56.));
+#109 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#110 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#111 = DEFINITIONAL_REPRESENTATION('',(#112),#120);
+#112 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#113,#114,#115,#116,#117,#118
+,#119),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#113 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#114 = CARTESIAN_POINT('',(0.E+000,38.018515226137));
+#115 = CARTESIAN_POINT('',(32.925,19.009257613068));
+#116 = CARTESIAN_POINT('',(65.85,5.376199448257E-015));
+#117 = CARTESIAN_POINT('',(32.925,-19.00925761306));
+#118 = CARTESIAN_POINT('',(3.552713678801E-014,-38.01851522613));
+#119 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#120 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#121 = ORIENTED_EDGE('',*,*,#122,.T.);
+#122 = EDGE_CURVE('',#90,#22,#123,.T.);
+#123 = SURFACE_CURVE('',#124,(#128,#134),.PCURVE_S1.);
+#124 = LINE('',#125,#126);
+#125 = CARTESIAN_POINT('',(6.4,-20.99624966511,0.E+000));
+#126 = VECTOR('',#127,1.);
+#127 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#128 = PCURVE('',#33,#129);
+#129 = DEFINITIONAL_REPRESENTATION('',(#130),#133);
+#130 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#131,#132),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#131 = CARTESIAN_POINT('',(-5.008258558174,-56.0000004));
+#132 = CARTESIAN_POINT('',(-5.008258558174,4.E-007));
+#133 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#134 = PCURVE('',#135,#140);
+#135 = PLANE('',#136);
+#136 = AXIS2_PLACEMENT_3D('',#137,#138,#139);
+#137 = CARTESIAN_POINT('',(6.4,-23.496647,56.));
+#138 = DIRECTION('',(1.,0.E+000,0.E+000));
+#139 = DIRECTION('',(0.E+000,1.,0.E+000));
+#140 = DEFINITIONAL_REPRESENTATION('',(#141),#144);
+#141 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#142,#143),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#142 = CARTESIAN_POINT('',(2.500397334881,3.99999997569E-007));
+#143 = CARTESIAN_POINT('',(2.500397334881,-56.0000004));
+#144 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#145 = ADVANCED_FACE('',(#146,#222,#257),#45,.F.);
+#146 = FACE_BOUND('',#147,.F.);
+#147 = EDGE_LOOP('',(#148,#149,#170,#196));
+#148 = ORIENTED_EDGE('',*,*,#21,.F.);
+#149 = ORIENTED_EDGE('',*,*,#150,.F.);
+#150 = EDGE_CURVE('',#151,#22,#153,.T.);
+#151 = VERTEX_POINT('',#152);
+#152 = CARTESIAN_POINT('',(6.4,-1.45,5.5));
+#153 = SURFACE_CURVE('',#154,(#158,#164),.PCURVE_S1.);
+#154 = LINE('',#155,#156);
+#155 = CARTESIAN_POINT('',(6.4,-11.7483235,5.5));
+#156 = VECTOR('',#157,1.);
+#157 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#158 = PCURVE('',#45,#159);
+#159 = DEFINITIONAL_REPRESENTATION('',(#160),#163);
+#160 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#161,#162),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-12.25294846651,11.202551131631),.PIECEWISE_BEZIER_KNOTS.);
+#161 = CARTESIAN_POINT('',(-19.979055,0.504624966512));
+#162 = CARTESIAN_POINT('',(-19.979055,-22.95087463163));
+#163 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#164 = PCURVE('',#135,#165);
+#165 = DEFINITIONAL_REPRESENTATION('',(#166),#169);
+#166 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#167,#168),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-12.25294846651,11.202551131631),.PIECEWISE_BEZIER_KNOTS.);
+#167 = CARTESIAN_POINT('',(24.001271966512,-50.5));
+#168 = CARTESIAN_POINT('',(0.545772368369,-50.5));
+#169 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#170 = ORIENTED_EDGE('',*,*,#171,.F.);
+#171 = EDGE_CURVE('',#172,#151,#174,.T.);
+#172 = VERTEX_POINT('',#173);
+#173 = CARTESIAN_POINT('',(21.902054698133,-1.45,5.5));
+#174 = SURFACE_CURVE('',#175,(#179,#185),.PCURVE_S1.);
+#175 = LINE('',#176,#177);
+#176 = CARTESIAN_POINT('',(16.3895275,-1.45,5.5));
+#177 = VECTOR('',#178,1.);
+#178 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#179 = PCURVE('',#45,#180);
+#180 = DEFINITIONAL_REPRESENTATION('',(#181),#184);
+#181 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#182,#183),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-7.062732667946,11.539732969813),.PIECEWISE_BEZIER_KNOTS.);
+#182 = CARTESIAN_POINT('',(-2.926794832054,-1.45));
+#183 = CARTESIAN_POINT('',(-21.52926046981,-1.45));
+#184 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#185 = PCURVE('',#186,#191);
+#186 = PLANE('',#187);
+#187 = AXIS2_PLACEMENT_3D('',#188,#189,#190);
+#188 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#189 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#190 = DIRECTION('',(1.,0.E+000,0.E+000));
+#191 = DEFINITIONAL_REPRESENTATION('',(#192),#195);
+#192 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#193,#194),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-7.062732667946,11.539732969813),.PIECEWISE_BEZIER_KNOTS.);
+#193 = CARTESIAN_POINT('',(17.052260167946,-50.5));
+#194 = CARTESIAN_POINT('',(-1.550205469813,-50.5));
+#195 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#196 = ORIENTED_EDGE('',*,*,#197,.F.);
+#197 = EDGE_CURVE('',#24,#172,#198,.T.);
+#198 = SURFACE_CURVE('',#199,(#204,#215),.PCURVE_S1.);
+#199 = CIRCLE('',#200,21.95);
+#200 = AXIS2_PLACEMENT_3D('',#201,#202,#203);
+#201 = CARTESIAN_POINT('',(0.E+000,0.E+000,5.5));
+#202 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#203 = DIRECTION('',(1.,0.E+000,0.E+000));
+#204 = PCURVE('',#45,#205);
+#205 = DEFINITIONAL_REPRESENTATION('',(#206),#214);
+#206 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#207,#208,#209,#210,#211,#212
+,#213),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#207 = CARTESIAN_POINT('',(-4.429055,0.E+000));
+#208 = CARTESIAN_POINT('',(-4.429055,-38.01851522613));
+#209 = CARTESIAN_POINT('',(-37.354055,-19.00925761306));
+#210 = CARTESIAN_POINT('',(-70.279055,-5.376199448257E-015));
+#211 = CARTESIAN_POINT('',(-37.354055,19.009257613068));
+#212 = CARTESIAN_POINT('',(-4.429055,38.018515226137));
+#213 = CARTESIAN_POINT('',(-4.429055,0.E+000));
+#214 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#215 = PCURVE('',#77,#216);
+#216 = DEFINITIONAL_REPRESENTATION('',(#217),#221);
+#217 = LINE('',#218,#219);
+#218 = CARTESIAN_POINT('',(-6.28318530718,-5.5));
+#219 = VECTOR('',#220,1.);
+#220 = DIRECTION('',(1.,-0.E+000));
+#221 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#222 = FACE_BOUND('',#223,.F.);
+#223 = EDGE_LOOP('',(#224));
+#224 = ORIENTED_EDGE('',*,*,#225,.T.);
+#225 = EDGE_CURVE('',#226,#226,#228,.T.);
+#226 = VERTEX_POINT('',#227);
+#227 = CARTESIAN_POINT('',(6.375,12.65,5.5));
+#228 = SURFACE_CURVE('',#229,(#234,#245),.PCURVE_S1.);
+#229 = CIRCLE('',#230,6.375);
+#230 = AXIS2_PLACEMENT_3D('',#231,#232,#233);
+#231 = CARTESIAN_POINT('',(0.E+000,12.65,5.5));
+#232 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#233 = DIRECTION('',(1.,0.E+000,0.E+000));
+#234 = PCURVE('',#45,#235);
+#235 = DEFINITIONAL_REPRESENTATION('',(#236),#244);
+#236 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#237,#238,#239,#240,#241,#242
+,#243),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#237 = CARTESIAN_POINT('',(-20.004055,12.65));
+#238 = CARTESIAN_POINT('',(-20.004055,1.608176101748));
+#239 = CARTESIAN_POINT('',(-29.566555,7.129088050874));
+#240 = CARTESIAN_POINT('',(-39.129055,12.65));
+#241 = CARTESIAN_POINT('',(-29.566555,18.170911949126));
+#242 = CARTESIAN_POINT('',(-20.004055,23.691823898252));
+#243 = CARTESIAN_POINT('',(-20.004055,12.65));
+#244 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#245 = PCURVE('',#246,#251);
+#246 = CYLINDRICAL_SURFACE('',#247,6.375);
+#247 = AXIS2_PLACEMENT_3D('',#248,#249,#250);
+#248 = CARTESIAN_POINT('',(0.E+000,12.65,0.E+000));
+#249 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#250 = DIRECTION('',(1.,0.E+000,0.E+000));
+#251 = DEFINITIONAL_REPRESENTATION('',(#252),#256);
+#252 = LINE('',#253,#254);
+#253 = CARTESIAN_POINT('',(0.E+000,-5.5));
+#254 = VECTOR('',#255,1.);
+#255 = DIRECTION('',(1.,0.E+000));
+#256 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#257 = FACE_BOUND('',#258,.F.);
+#258 = EDGE_LOOP('',(#259));
+#259 = ORIENTED_EDGE('',*,*,#260,.F.);
+#260 = EDGE_CURVE('',#261,#261,#263,.T.);
+#261 = VERTEX_POINT('',#262);
+#262 = CARTESIAN_POINT('',(1.75,-16.7,5.5));
+#263 = SURFACE_CURVE('',#264,(#269,#276),.PCURVE_S1.);
+#264 = CIRCLE('',#265,1.75);
+#265 = AXIS2_PLACEMENT_3D('',#266,#267,#268);
+#266 = CARTESIAN_POINT('',(0.E+000,-16.7,5.5));
+#267 = DIRECTION('',(0.E+000,0.E+000,1.));
+#268 = DIRECTION('',(1.,0.E+000,0.E+000));
+#269 = PCURVE('',#45,#270);
+#270 = DEFINITIONAL_REPRESENTATION('',(#271),#275);
+#271 = CIRCLE('',#272,1.75);
+#272 = AXIS2_PLACEMENT_2D('',#273,#274);
+#273 = CARTESIAN_POINT('',(-26.379055,-16.7));
+#274 = DIRECTION('',(1.,0.E+000));
+#275 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#276 = PCURVE('',#277,#282);
+#277 = CYLINDRICAL_SURFACE('',#278,1.75);
+#278 = AXIS2_PLACEMENT_3D('',#279,#280,#281);
+#279 = CARTESIAN_POINT('',(0.E+000,-16.7,56.));
+#280 = DIRECTION('',(0.E+000,0.E+000,1.));
+#281 = DIRECTION('',(1.,0.E+000,0.E+000));
+#282 = DEFINITIONAL_REPRESENTATION('',(#283),#287);
+#283 = LINE('',#284,#285);
+#284 = CARTESIAN_POINT('',(0.E+000,-50.5));
+#285 = VECTOR('',#286,1.);
+#286 = DIRECTION('',(1.,0.E+000));
+#287 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#288 = ADVANCED_FACE('',(#289),#135,.T.);
+#289 = FACE_BOUND('',#290,.T.);
+#290 = EDGE_LOOP('',(#291,#314,#315,#316));
+#291 = ORIENTED_EDGE('',*,*,#292,.F.);
+#292 = EDGE_CURVE('',#90,#293,#295,.T.);
+#293 = VERTEX_POINT('',#294);
+#294 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#295 = SURFACE_CURVE('',#296,(#300,#307),.PCURVE_S1.);
+#296 = LINE('',#297,#298);
+#297 = CARTESIAN_POINT('',(6.4,-23.496647,56.));
+#298 = VECTOR('',#299,1.);
+#299 = DIRECTION('',(0.E+000,1.,0.E+000));
+#300 = PCURVE('',#135,#301);
+#301 = DEFINITIONAL_REPRESENTATION('',(#302),#306);
+#302 = LINE('',#303,#304);
+#303 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#304 = VECTOR('',#305,1.);
+#305 = DIRECTION('',(1.,0.E+000));
+#306 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#307 = PCURVE('',#106,#308);
+#308 = DEFINITIONAL_REPRESENTATION('',(#309),#313);
+#309 = LINE('',#310,#311);
+#310 = CARTESIAN_POINT('',(15.55,-23.496647));
+#311 = VECTOR('',#312,1.);
+#312 = DIRECTION('',(0.E+000,1.));
+#313 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#314 = ORIENTED_EDGE('',*,*,#122,.T.);
+#315 = ORIENTED_EDGE('',*,*,#150,.F.);
+#316 = ORIENTED_EDGE('',*,*,#317,.F.);
+#317 = EDGE_CURVE('',#293,#151,#318,.T.);
+#318 = SURFACE_CURVE('',#319,(#323,#330),.PCURVE_S1.);
+#319 = LINE('',#320,#321);
+#320 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#321 = VECTOR('',#322,1.);
+#322 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#323 = PCURVE('',#135,#324);
+#324 = DEFINITIONAL_REPRESENTATION('',(#325),#329);
+#325 = LINE('',#326,#327);
+#326 = CARTESIAN_POINT('',(22.046647,0.E+000));
+#327 = VECTOR('',#328,1.);
+#328 = DIRECTION('',(0.E+000,-1.));
+#329 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#330 = PCURVE('',#186,#331);
+#331 = DEFINITIONAL_REPRESENTATION('',(#332),#336);
+#332 = LINE('',#333,#334);
+#333 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#334 = VECTOR('',#335,1.);
+#335 = DIRECTION('',(0.E+000,-1.));
+#336 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#337 = ADVANCED_FACE('',(#338,#391,#421),#106,.F.);
+#338 = FACE_BOUND('',#339,.F.);
+#339 = EDGE_LOOP('',(#340,#341,#369,#390));
+#340 = ORIENTED_EDGE('',*,*,#89,.F.);
+#341 = ORIENTED_EDGE('',*,*,#342,.F.);
+#342 = EDGE_CURVE('',#343,#62,#345,.T.);
+#343 = VERTEX_POINT('',#344);
+#344 = CARTESIAN_POINT('',(21.902054698133,-1.45,56.));
+#345 = SURFACE_CURVE('',#346,(#351,#362),.PCURVE_S1.);
+#346 = CIRCLE('',#347,21.95);
+#347 = AXIS2_PLACEMENT_3D('',#348,#349,#350);
+#348 = CARTESIAN_POINT('',(0.E+000,0.E+000,56.));
+#349 = DIRECTION('',(0.E+000,0.E+000,1.));
+#350 = DIRECTION('',(1.,0.E+000,0.E+000));
+#351 = PCURVE('',#106,#352);
+#352 = DEFINITIONAL_REPRESENTATION('',(#353),#361);
+#353 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#354,#355,#356,#357,#358,#359
+,#360),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#354 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#355 = CARTESIAN_POINT('',(0.E+000,38.018515226137));
+#356 = CARTESIAN_POINT('',(32.925,19.009257613068));
+#357 = CARTESIAN_POINT('',(65.85,5.376199448257E-015));
+#358 = CARTESIAN_POINT('',(32.925,-19.00925761306));
+#359 = CARTESIAN_POINT('',(3.552713678801E-014,-38.01851522613));
+#360 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#361 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#362 = PCURVE('',#77,#363);
+#363 = DEFINITIONAL_REPRESENTATION('',(#364),#368);
+#364 = LINE('',#365,#366);
+#365 = CARTESIAN_POINT('',(-0.E+000,-56.));
+#366 = VECTOR('',#367,1.);
+#367 = DIRECTION('',(-1.,0.E+000));
+#368 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#369 = ORIENTED_EDGE('',*,*,#370,.F.);
+#370 = EDGE_CURVE('',#293,#343,#371,.T.);
+#371 = SURFACE_CURVE('',#372,(#376,#383),.PCURVE_S1.);
+#372 = LINE('',#373,#374);
+#373 = CARTESIAN_POINT('',(6.4,-1.45,56.));
+#374 = VECTOR('',#375,1.);
+#375 = DIRECTION('',(1.,0.E+000,0.E+000));
+#376 = PCURVE('',#106,#377);
+#377 = DEFINITIONAL_REPRESENTATION('',(#378),#382);
+#378 = LINE('',#379,#380);
+#379 = CARTESIAN_POINT('',(15.55,-1.45));
+#380 = VECTOR('',#381,1.);
+#381 = DIRECTION('',(-1.,0.E+000));
+#382 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#383 = PCURVE('',#186,#384);
+#384 = DEFINITIONAL_REPRESENTATION('',(#385),#389);
+#385 = LINE('',#386,#387);
+#386 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#387 = VECTOR('',#388,1.);
+#388 = DIRECTION('',(1.,0.E+000));
+#389 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#390 = ORIENTED_EDGE('',*,*,#292,.F.);
+#391 = FACE_BOUND('',#392,.F.);
+#392 = EDGE_LOOP('',(#393));
+#393 = ORIENTED_EDGE('',*,*,#394,.T.);
+#394 = EDGE_CURVE('',#395,#395,#397,.T.);
+#395 = VERTEX_POINT('',#396);
+#396 = CARTESIAN_POINT('',(1.75,-16.7,56.));
+#397 = SURFACE_CURVE('',#398,(#403,#414),.PCURVE_S1.);
+#398 = CIRCLE('',#399,1.75);
+#399 = AXIS2_PLACEMENT_3D('',#400,#401,#402);
+#400 = CARTESIAN_POINT('',(0.E+000,-16.7,56.));
+#401 = DIRECTION('',(0.E+000,0.E+000,1.));
+#402 = DIRECTION('',(1.,0.E+000,0.E+000));
+#403 = PCURVE('',#106,#404);
+#404 = DEFINITIONAL_REPRESENTATION('',(#405),#413);
+#405 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#406,#407,#408,#409,#410,#411
+,#412),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#406 = CARTESIAN_POINT('',(20.2,-16.7));
+#407 = CARTESIAN_POINT('',(20.2,-13.66891108675));
+#408 = CARTESIAN_POINT('',(22.825,-15.18445554337));
+#409 = CARTESIAN_POINT('',(25.45,-16.7));
+#410 = CARTESIAN_POINT('',(22.825,-18.21554445662));
+#411 = CARTESIAN_POINT('',(20.2,-19.73108891324));
+#412 = CARTESIAN_POINT('',(20.2,-16.7));
+#413 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#414 = PCURVE('',#277,#415);
+#415 = DEFINITIONAL_REPRESENTATION('',(#416),#420);
+#416 = LINE('',#417,#418);
+#417 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#418 = VECTOR('',#419,1.);
+#419 = DIRECTION('',(1.,0.E+000));
+#420 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#421 = FACE_BOUND('',#422,.F.);
+#422 = EDGE_LOOP('',(#423));
+#423 = ORIENTED_EDGE('',*,*,#424,.T.);
+#424 = EDGE_CURVE('',#425,#425,#427,.T.);
+#425 = VERTEX_POINT('',#426);
+#426 = CARTESIAN_POINT('',(3.925,12.65,56.));
+#427 = SURFACE_CURVE('',#428,(#433,#444),.PCURVE_S1.);
+#428 = CIRCLE('',#429,3.925);
+#429 = AXIS2_PLACEMENT_3D('',#430,#431,#432);
+#430 = CARTESIAN_POINT('',(0.E+000,12.65,56.));
+#431 = DIRECTION('',(0.E+000,0.E+000,1.));
+#432 = DIRECTION('',(1.,0.E+000,0.E+000));
+#433 = PCURVE('',#106,#434);
+#434 = DEFINITIONAL_REPRESENTATION('',(#435),#443);
+#435 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#436,#437,#438,#439,#440,#441
+,#442),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#436 = CARTESIAN_POINT('',(18.025,12.65));
+#437 = CARTESIAN_POINT('',(18.025,19.448299419708));
+#438 = CARTESIAN_POINT('',(23.9125,16.049149709854));
+#439 = CARTESIAN_POINT('',(29.8,12.65));
+#440 = CARTESIAN_POINT('',(23.9125,9.250850290146));
+#441 = CARTESIAN_POINT('',(18.025,5.851700580292));
+#442 = CARTESIAN_POINT('',(18.025,12.65));
+#443 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#444 = PCURVE('',#445,#450);
+#445 = CYLINDRICAL_SURFACE('',#446,3.925);
+#446 = AXIS2_PLACEMENT_3D('',#447,#448,#449);
+#447 = CARTESIAN_POINT('',(0.E+000,12.65,56.));
+#448 = DIRECTION('',(0.E+000,0.E+000,1.));
+#449 = DIRECTION('',(1.,0.E+000,0.E+000));
+#450 = DEFINITIONAL_REPRESENTATION('',(#451),#455);
+#451 = LINE('',#452,#453);
+#452 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#453 = VECTOR('',#454,1.);
+#454 = DIRECTION('',(1.,0.E+000));
+#455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#456 = ADVANCED_FACE('',(#457),#77,.T.);
+#457 = FACE_BOUND('',#458,.F.);
+#458 = EDGE_LOOP('',(#459,#460,#461,#480));
+#459 = ORIENTED_EDGE('',*,*,#61,.F.);
+#460 = ORIENTED_EDGE('',*,*,#197,.T.);
+#461 = ORIENTED_EDGE('',*,*,#462,.F.);
+#462 = EDGE_CURVE('',#343,#172,#463,.T.);
+#463 = SURFACE_CURVE('',#464,(#468,#474),.PCURVE_S1.);
+#464 = LINE('',#465,#466);
+#465 = CARTESIAN_POINT('',(21.902054698133,-1.45,0.E+000));
+#466 = VECTOR('',#467,1.);
+#467 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#468 = PCURVE('',#77,#469);
+#469 = DEFINITIONAL_REPRESENTATION('',(#470),#473);
+#470 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#471,#472),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#471 = CARTESIAN_POINT('',(-6.217077941965,-56.0000004));
+#472 = CARTESIAN_POINT('',(-6.217077941965,4.E-007));
+#473 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#474 = PCURVE('',#186,#475);
+#475 = DEFINITIONAL_REPRESENTATION('',(#476),#479);
+#476 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#477,#478),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-56.0000004,4.E-007),.PIECEWISE_BEZIER_KNOTS.);
+#477 = CARTESIAN_POINT('',(15.502054698133,3.99999997569E-007));
+#478 = CARTESIAN_POINT('',(15.502054698133,-56.0000004));
+#479 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#480 = ORIENTED_EDGE('',*,*,#342,.T.);
+#481 = ADVANCED_FACE('',(#482),#186,.T.);
+#482 = FACE_BOUND('',#483,.T.);
+#483 = EDGE_LOOP('',(#484,#485,#486,#487));
+#484 = ORIENTED_EDGE('',*,*,#370,.F.);
+#485 = ORIENTED_EDGE('',*,*,#317,.T.);
+#486 = ORIENTED_EDGE('',*,*,#171,.F.);
+#487 = ORIENTED_EDGE('',*,*,#462,.F.);
+#488 = ADVANCED_FACE('',(#489),#246,.F.);
+#489 = FACE_BOUND('',#490,.F.);
+#490 = EDGE_LOOP('',(#491,#492,#515,#546));
+#491 = ORIENTED_EDGE('',*,*,#225,.F.);
+#492 = ORIENTED_EDGE('',*,*,#493,.T.);
+#493 = EDGE_CURVE('',#226,#494,#496,.T.);
+#494 = VERTEX_POINT('',#495);
+#495 = CARTESIAN_POINT('',(6.375,12.65,16.));
+#496 = SEAM_CURVE('',#497,(#501,#508),.PCURVE_S1.);
+#497 = LINE('',#498,#499);
+#498 = CARTESIAN_POINT('',(6.375,12.65,0.E+000));
+#499 = VECTOR('',#500,1.);
+#500 = DIRECTION('',(0.E+000,0.E+000,1.));
+#501 = PCURVE('',#246,#502);
+#502 = DEFINITIONAL_REPRESENTATION('',(#503),#507);
+#503 = LINE('',#504,#505);
+#504 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#505 = VECTOR('',#506,1.);
+#506 = DIRECTION('',(0.E+000,-1.));
+#507 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#508 = PCURVE('',#246,#509);
+#509 = DEFINITIONAL_REPRESENTATION('',(#510),#514);
+#510 = LINE('',#511,#512);
+#511 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#512 = VECTOR('',#513,1.);
+#513 = DIRECTION('',(0.E+000,-1.));
+#514 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#515 = ORIENTED_EDGE('',*,*,#516,.T.);
+#516 = EDGE_CURVE('',#494,#494,#517,.T.);
+#517 = SURFACE_CURVE('',#518,(#523,#530),.PCURVE_S1.);
+#518 = CIRCLE('',#519,6.375);
+#519 = AXIS2_PLACEMENT_3D('',#520,#521,#522);
+#520 = CARTESIAN_POINT('',(0.E+000,12.65,16.));
+#521 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#522 = DIRECTION('',(1.,0.E+000,0.E+000));
+#523 = PCURVE('',#246,#524);
+#524 = DEFINITIONAL_REPRESENTATION('',(#525),#529);
+#525 = LINE('',#526,#527);
+#526 = CARTESIAN_POINT('',(0.E+000,-16.));
+#527 = VECTOR('',#528,1.);
+#528 = DIRECTION('',(1.,0.E+000));
+#529 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#530 = PCURVE('',#531,#536);
+#531 = PLANE('',#532);
+#532 = AXIS2_PLACEMENT_3D('',#533,#534,#535);
+#533 = CARTESIAN_POINT('',(6.375,12.65,16.));
+#534 = DIRECTION('',(0.E+000,0.E+000,1.));
+#535 = DIRECTION('',(1.,0.E+000,0.E+000));
+#536 = DEFINITIONAL_REPRESENTATION('',(#537),#545);
+#537 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#538,#539,#540,#541,#542,#543
+,#544),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#538 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#539 = CARTESIAN_POINT('',(0.E+000,-11.04182389825));
+#540 = CARTESIAN_POINT('',(-9.5625,-5.520911949126));
+#541 = CARTESIAN_POINT('',(-19.125,-1.561424668913E-015));
+#542 = CARTESIAN_POINT('',(-9.5625,5.520911949126));
+#543 = CARTESIAN_POINT('',(-9.769962616701E-015,11.041823898252));
+#544 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#545 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#546 = ORIENTED_EDGE('',*,*,#493,.F.);
+#547 = ADVANCED_FACE('',(#548),#277,.F.);
+#548 = FACE_BOUND('',#549,.F.);
+#549 = EDGE_LOOP('',(#550,#571,#572,#573));
+#550 = ORIENTED_EDGE('',*,*,#551,.F.);
+#551 = EDGE_CURVE('',#395,#261,#552,.T.);
+#552 = SEAM_CURVE('',#553,(#557,#564),.PCURVE_S1.);
+#553 = LINE('',#554,#555);
+#554 = CARTESIAN_POINT('',(1.75,-16.7,56.));
+#555 = VECTOR('',#556,1.);
+#556 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#557 = PCURVE('',#277,#558);
+#558 = DEFINITIONAL_REPRESENTATION('',(#559),#563);
+#559 = LINE('',#560,#561);
+#560 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#561 = VECTOR('',#562,1.);
+#562 = DIRECTION('',(0.E+000,-1.));
+#563 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#564 = PCURVE('',#277,#565);
+#565 = DEFINITIONAL_REPRESENTATION('',(#566),#570);
+#566 = LINE('',#567,#568);
+#567 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#568 = VECTOR('',#569,1.);
+#569 = DIRECTION('',(0.E+000,-1.));
+#570 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#571 = ORIENTED_EDGE('',*,*,#394,.F.);
+#572 = ORIENTED_EDGE('',*,*,#551,.T.);
+#573 = ORIENTED_EDGE('',*,*,#260,.T.);
+#574 = ADVANCED_FACE('',(#575),#445,.F.);
+#575 = FACE_BOUND('',#576,.F.);
+#576 = EDGE_LOOP('',(#577,#600,#601,#602));
+#577 = ORIENTED_EDGE('',*,*,#578,.F.);
+#578 = EDGE_CURVE('',#425,#579,#581,.T.);
+#579 = VERTEX_POINT('',#580);
+#580 = CARTESIAN_POINT('',(3.925,12.65,16.));
+#581 = SEAM_CURVE('',#582,(#586,#593),.PCURVE_S1.);
+#582 = LINE('',#583,#584);
+#583 = CARTESIAN_POINT('',(3.925,12.65,56.));
+#584 = VECTOR('',#585,1.);
+#585 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#586 = PCURVE('',#445,#587);
+#587 = DEFINITIONAL_REPRESENTATION('',(#588),#592);
+#588 = LINE('',#589,#590);
+#589 = CARTESIAN_POINT('',(6.28318530718,0.E+000));
+#590 = VECTOR('',#591,1.);
+#591 = DIRECTION('',(0.E+000,-1.));
+#592 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#593 = PCURVE('',#445,#594);
+#594 = DEFINITIONAL_REPRESENTATION('',(#595),#599);
+#595 = LINE('',#596,#597);
+#596 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#597 = VECTOR('',#598,1.);
+#598 = DIRECTION('',(0.E+000,-1.));
+#599 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#600 = ORIENTED_EDGE('',*,*,#424,.F.);
+#601 = ORIENTED_EDGE('',*,*,#578,.T.);
+#602 = ORIENTED_EDGE('',*,*,#603,.T.);
+#603 = EDGE_CURVE('',#579,#579,#604,.T.);
+#604 = SURFACE_CURVE('',#605,(#610,#617),.PCURVE_S1.);
+#605 = CIRCLE('',#606,3.925);
+#606 = AXIS2_PLACEMENT_3D('',#607,#608,#609);
+#607 = CARTESIAN_POINT('',(0.E+000,12.65,16.));
+#608 = DIRECTION('',(0.E+000,0.E+000,1.));
+#609 = DIRECTION('',(1.,0.E+000,0.E+000));
+#610 = PCURVE('',#445,#611);
+#611 = DEFINITIONAL_REPRESENTATION('',(#612),#616);
+#612 = LINE('',#613,#614);
+#613 = CARTESIAN_POINT('',(0.E+000,-40.));
+#614 = VECTOR('',#615,1.);
+#615 = DIRECTION('',(1.,0.E+000));
+#616 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#617 = PCURVE('',#531,#618);
+#618 = DEFINITIONAL_REPRESENTATION('',(#619),#623);
+#619 = CIRCLE('',#620,3.925);
+#620 = AXIS2_PLACEMENT_2D('',#621,#622);
+#621 = CARTESIAN_POINT('',(-6.375,0.E+000));
+#622 = DIRECTION('',(1.,0.E+000));
+#623 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#624 = ADVANCED_FACE('',(#625,#628),#531,.F.);
+#625 = FACE_BOUND('',#626,.F.);
+#626 = EDGE_LOOP('',(#627));
+#627 = ORIENTED_EDGE('',*,*,#516,.F.);
+#628 = FACE_BOUND('',#629,.F.);
+#629 = EDGE_LOOP('',(#630));
+#630 = ORIENTED_EDGE('',*,*,#603,.F.);
+#631 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) 
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#635)) GLOBAL_UNIT_ASSIGNED_CONTEXT
+((#632,#633,#634)) REPRESENTATION_CONTEXT('Context #1',
+  '3D Context with UNIT and UNCERTAINTY') );
+#632 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#633 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#634 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#635 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-007),#632,
+  'distance_accuracy_value','confusion accuracy');
+#636 = PRODUCT_TYPE('part',$,(#7));
+#637 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#638)
+  ,#631);
+#638 = STYLED_ITEM('color',(#639),#15);
+#639 = PRESENTATION_STYLE_ASSIGNMENT((#640,#646));
+#640 = SURFACE_STYLE_USAGE(.BOTH.,#641);
+#641 = SURFACE_SIDE_STYLE('',(#642));
+#642 = SURFACE_STYLE_FILL_AREA(#643);
+#643 = FILL_AREA_STYLE('',(#644));
+#644 = FILL_AREA_STYLE_COLOUR('',#645);
+#645 = COLOUR_RGB('',0.800000011921,0.800000011921,0.800000011921);
+#646 = CURVE_STYLE('',#647,POSITIVE_LENGTH_MEASURE(0.1),#645);
+#647 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
+ENDSEC;
+END-ISO-10303-21;

Pistols/9mm_Gluty_AR-15_Pistol-unnamed/STEP/simulated_steel_firing_pin.step

@@ -0,0 +1,799 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION(('FreeCAD Model'),'2;1');
+FILE_NAME(
+'E:/shuty mp1 final (2)/shuty mp1 final/mp-1 step/simulated steel 
+firing pin.step','2016-03-27T03:06:31',('Author'),(''),
+  'Open CASCADE STEP processor 6.8','FreeCAD','Unknown');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN_CC2 { 1 2 10303 214 -1 1 5 4 }'));
+ENDSEC;
+DATA;
+#1 = APPLICATION_PROTOCOL_DEFINITION('committee draft',
+  'automotive_design',1997,#2);
+#2 = APPLICATION_CONTEXT(
+  'core data for automotive mechanical design processes');
+#3 = SHAPE_DEFINITION_REPRESENTATION(#4,#10);
+#4 = PRODUCT_DEFINITION_SHAPE('','',#5);
+#5 = PRODUCT_DEFINITION('design','',#6,#9);
+#6 = PRODUCT_DEFINITION_FORMATION('','',#7);
+#7 = PRODUCT('Pocket','Pocket','',(#8));
+#8 = MECHANICAL_CONTEXT('',#2,'mechanical');
+#9 = PRODUCT_DEFINITION_CONTEXT('part definition',#2,'design');
+#10 = ADVANCED_BREP_SHAPE_REPRESENTATION('',(#11,#15),#602);
+#11 = AXIS2_PLACEMENT_3D('',#12,#13,#14);
+#12 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#13 = DIRECTION('',(0.E+000,0.E+000,1.));
+#14 = DIRECTION('',(1.,0.E+000,-0.E+000));
+#15 = MANIFOLD_SOLID_BREP('',#16);
+#16 = CLOSED_SHELL('',(#17,#221,#256,#282,#309,#314,#409,#541,#598));
+#17 = ADVANCED_FACE('',(#18),#31,.T.);
+#18 = FACE_BOUND('',#19,.F.);
+#19 = EDGE_LOOP('',(#20,#58,#81,#114,#140,#173,#194,#220));
+#20 = ORIENTED_EDGE('',*,*,#21,.F.);
+#21 = EDGE_CURVE('',#22,#22,#24,.T.);
+#22 = VERTEX_POINT('',#23);
+#23 = CARTESIAN_POINT('',(2.8,0.E+000,0.E+000));
+#24 = SURFACE_CURVE('',#25,(#30,#42),.PCURVE_S1.);
+#25 = CIRCLE('',#26,2.8);
+#26 = AXIS2_PLACEMENT_3D('',#27,#28,#29);
+#27 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#28 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#29 = DIRECTION('',(1.,0.E+000,0.E+000));
+#30 = PCURVE('',#31,#36);
+#31 = CYLINDRICAL_SURFACE('',#32,2.8);
+#32 = AXIS2_PLACEMENT_3D('',#33,#34,#35);
+#33 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#34 = DIRECTION('',(0.E+000,0.E+000,1.));
+#35 = DIRECTION('',(1.,0.E+000,0.E+000));
+#36 = DEFINITIONAL_REPRESENTATION('',(#37),#41);
+#37 = LINE('',#38,#39);
+#38 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#39 = VECTOR('',#40,1.);
+#40 = DIRECTION('',(-1.,0.E+000));
+#41 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#42 = PCURVE('',#43,#48);
+#43 = PLANE('',#44);
+#44 = AXIS2_PLACEMENT_3D('',#45,#46,#47);
+#45 = CARTESIAN_POINT('',(2.8,0.E+000,0.E+000));
+#46 = DIRECTION('',(0.E+000,0.E+000,1.));
+#47 = DIRECTION('',(1.,0.E+000,0.E+000));
+#48 = DEFINITIONAL_REPRESENTATION('',(#49),#57);
+#49 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#50,#51,#52,#53,#54,#55,#56),
+.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#50 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#51 = CARTESIAN_POINT('',(0.E+000,-4.849742261193));
+#52 = CARTESIAN_POINT('',(-4.2,-2.424871130596));
+#53 = CARTESIAN_POINT('',(-8.4,-6.858022075225E-016));
+#54 = CARTESIAN_POINT('',(-4.2,2.424871130596));
+#55 = CARTESIAN_POINT('',(-4.440892098501E-015,4.849742261193));
+#56 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#57 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#58 = ORIENTED_EDGE('',*,*,#59,.T.);
+#59 = EDGE_CURVE('',#22,#60,#62,.T.);
+#60 = VERTEX_POINT('',#61);
+#61 = CARTESIAN_POINT('',(2.8,0.E+000,-9.));
+#62 = SEAM_CURVE('',#63,(#67,#74),.PCURVE_S1.);
+#63 = LINE('',#64,#65);
+#64 = CARTESIAN_POINT('',(2.8,0.E+000,0.E+000));
+#65 = VECTOR('',#66,1.);
+#66 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#67 = PCURVE('',#31,#68);
+#68 = DEFINITIONAL_REPRESENTATION('',(#69),#73);
+#69 = LINE('',#70,#71);
+#70 = CARTESIAN_POINT('',(-6.28318530718,0.E+000));
+#71 = VECTOR('',#72,1.);
+#72 = DIRECTION('',(-0.E+000,-1.));
+#73 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#74 = PCURVE('',#31,#75);
+#75 = DEFINITIONAL_REPRESENTATION('',(#76),#80);
+#76 = LINE('',#77,#78);
+#77 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#78 = VECTOR('',#79,1.);
+#79 = DIRECTION('',(-0.E+000,-1.));
+#80 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#81 = ORIENTED_EDGE('',*,*,#82,.T.);
+#82 = EDGE_CURVE('',#60,#83,#85,.T.);
+#83 = VERTEX_POINT('',#84);
+#84 = CARTESIAN_POINT('',(2.782035929154,-0.316664,-9.));
+#85 = SURFACE_CURVE('',#86,(#91,#98),.PCURVE_S1.);
+#86 = CIRCLE('',#87,2.8);
+#87 = AXIS2_PLACEMENT_3D('',#88,#89,#90);
+#88 = CARTESIAN_POINT('',(0.E+000,0.E+000,-9.));
+#89 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#90 = DIRECTION('',(1.,0.E+000,0.E+000));
+#91 = PCURVE('',#31,#92);
+#92 = DEFINITIONAL_REPRESENTATION('',(#93),#97);
+#93 = LINE('',#94,#95);
+#94 = CARTESIAN_POINT('',(-0.E+000,-9.));
+#95 = VECTOR('',#96,1.);
+#96 = DIRECTION('',(-1.,0.E+000));
+#97 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#98 = PCURVE('',#99,#104);
+#99 = PLANE('',#100);
+#100 = AXIS2_PLACEMENT_3D('',#101,#102,#103);
+#101 = CARTESIAN_POINT('',(2.8,0.E+000,-9.));
+#102 = DIRECTION('',(0.E+000,0.E+000,1.));
+#103 = DIRECTION('',(1.,0.E+000,0.E+000));
+#104 = DEFINITIONAL_REPRESENTATION('',(#105),#113);
+#105 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#106,#107,#108,#109,#110,#111
+,#112),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#106 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#107 = CARTESIAN_POINT('',(0.E+000,-4.849742261193));
+#108 = CARTESIAN_POINT('',(-4.2,-2.424871130596));
+#109 = CARTESIAN_POINT('',(-8.4,-6.858022075225E-016));
+#110 = CARTESIAN_POINT('',(-4.2,2.424871130596));
+#111 = CARTESIAN_POINT('',(-4.440892098501E-015,4.849742261193));
+#112 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#113 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#114 = ORIENTED_EDGE('',*,*,#115,.T.);
+#115 = EDGE_CURVE('',#83,#116,#118,.T.);
+#116 = VERTEX_POINT('',#117);
+#117 = CARTESIAN_POINT('',(2.782035929154,-0.316664,-3.));
+#118 = SURFACE_CURVE('',#119,(#123,#129),.PCURVE_S1.);
+#119 = LINE('',#120,#121);
+#120 = CARTESIAN_POINT('',(2.782035929154,-0.316664,0.E+000));
+#121 = VECTOR('',#122,1.);
+#122 = DIRECTION('',(0.E+000,0.E+000,1.));
+#123 = PCURVE('',#31,#124);
+#124 = DEFINITIONAL_REPRESENTATION('',(#125),#128);
+#125 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#126,#127),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-9.0000004,-2.4),.PIECEWISE_BEZIER_KNOTS.);
+#126 = CARTESIAN_POINT('',(-0.113336769275,-9.0000004));
+#127 = CARTESIAN_POINT('',(-0.113336769275,-2.4));
+#128 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#129 = PCURVE('',#130,#135);
+#130 = PLANE('',#131);
+#131 = AXIS2_PLACEMENT_3D('',#132,#133,#134);
+#132 = CARTESIAN_POINT('',(6.20274,-0.316664,-9.));
+#133 = DIRECTION('',(0.E+000,-1.,0.E+000));
+#134 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#135 = DEFINITIONAL_REPRESENTATION('',(#136),#139);
+#136 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#137,#138),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-9.0000004,-2.4),.PIECEWISE_BEZIER_KNOTS.);
+#137 = CARTESIAN_POINT('',(3.420704070846,3.999999993454E-007));
+#138 = CARTESIAN_POINT('',(3.420704070846,-6.6));
+#139 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#140 = ORIENTED_EDGE('',*,*,#141,.F.);
+#141 = EDGE_CURVE('',#142,#116,#144,.T.);
+#142 = VERTEX_POINT('',#143);
+#143 = CARTESIAN_POINT('',(-2.782035929154,-0.316664,-3.));
+#144 = SURFACE_CURVE('',#145,(#150,#157),.PCURVE_S1.);
+#145 = CIRCLE('',#146,2.8);
+#146 = AXIS2_PLACEMENT_3D('',#147,#148,#149);
+#147 = CARTESIAN_POINT('',(0.E+000,0.E+000,-3.));
+#148 = DIRECTION('',(0.E+000,0.E+000,1.));
+#149 = DIRECTION('',(1.,0.E+000,0.E+000));
+#150 = PCURVE('',#31,#151);
+#151 = DEFINITIONAL_REPRESENTATION('',(#152),#156);
+#152 = LINE('',#153,#154);
+#153 = CARTESIAN_POINT('',(-6.28318530718,-3.));
+#154 = VECTOR('',#155,1.);
+#155 = DIRECTION('',(1.,-0.E+000));
+#156 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#157 = PCURVE('',#158,#163);
+#158 = PLANE('',#159);
+#159 = AXIS2_PLACEMENT_3D('',#160,#161,#162);
+#160 = CARTESIAN_POINT('',(-6.083915,-5.129994,-3.));
+#161 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#162 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#163 = DEFINITIONAL_REPRESENTATION('',(#164),#172);
+#164 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#165,#166,#167,#168,#169,#170
+,#171),.UNSPECIFIED.,.T.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#165 = CARTESIAN_POINT('',(-8.883915,5.129994));
+#166 = CARTESIAN_POINT('',(-8.883915,9.979736261193));
+#167 = CARTESIAN_POINT('',(-4.683915,7.554865130596));
+#168 = CARTESIAN_POINT('',(-0.483915,5.129994));
+#169 = CARTESIAN_POINT('',(-4.683915,2.705122869404));
+#170 = CARTESIAN_POINT('',(-8.883915,0.280251738807));
+#171 = CARTESIAN_POINT('',(-8.883915,5.129994));
+#172 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#173 = ORIENTED_EDGE('',*,*,#174,.F.);
+#174 = EDGE_CURVE('',#175,#142,#177,.T.);
+#175 = VERTEX_POINT('',#176);
+#176 = CARTESIAN_POINT('',(-2.782035929154,-0.316664,-9.));
+#177 = SURFACE_CURVE('',#178,(#182,#188),.PCURVE_S1.);
+#178 = LINE('',#179,#180);
+#179 = CARTESIAN_POINT('',(-2.782035929154,-0.316664,0.E+000));
+#180 = VECTOR('',#181,1.);
+#181 = DIRECTION('',(0.E+000,0.E+000,1.));
+#182 = PCURVE('',#31,#183);
+#183 = DEFINITIONAL_REPRESENTATION('',(#184),#187);
+#184 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#185,#186),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-9.0000004,-2.4),.PIECEWISE_BEZIER_KNOTS.);
+#185 = CARTESIAN_POINT('',(-3.028255884315,-9.0000004));
+#186 = CARTESIAN_POINT('',(-3.028255884315,-2.4));
+#187 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#188 = PCURVE('',#130,#189);
+#189 = DEFINITIONAL_REPRESENTATION('',(#190),#193);
+#190 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#191,#192),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(-9.0000004,-2.4),.PIECEWISE_BEZIER_KNOTS.);
+#191 = CARTESIAN_POINT('',(8.984775929154,3.999999993454E-007));
+#192 = CARTESIAN_POINT('',(8.984775929154,-6.6));
+#193 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#194 = ORIENTED_EDGE('',*,*,#195,.T.);
+#195 = EDGE_CURVE('',#175,#60,#196,.T.);
+#196 = SURFACE_CURVE('',#197,(#202,#209),.PCURVE_S1.);
+#197 = CIRCLE('',#198,2.8);
+#198 = AXIS2_PLACEMENT_3D('',#199,#200,#201);
+#199 = CARTESIAN_POINT('',(0.E+000,0.E+000,-9.));
+#200 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#201 = DIRECTION('',(1.,0.E+000,0.E+000));
+#202 = PCURVE('',#31,#203);
+#203 = DEFINITIONAL_REPRESENTATION('',(#204),#208);
+#204 = LINE('',#205,#206);
+#205 = CARTESIAN_POINT('',(-0.E+000,-9.));
+#206 = VECTOR('',#207,1.);
+#207 = DIRECTION('',(-1.,0.E+000));
+#208 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#209 = PCURVE('',#99,#210);
+#210 = DEFINITIONAL_REPRESENTATION('',(#211),#219);
+#211 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#212,#213,#214,#215,#216,#217
+,#218),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#212 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#213 = CARTESIAN_POINT('',(0.E+000,-4.849742261193));
+#214 = CARTESIAN_POINT('',(-4.2,-2.424871130596));
+#215 = CARTESIAN_POINT('',(-8.4,-6.858022075225E-016));
+#216 = CARTESIAN_POINT('',(-4.2,2.424871130596));
+#217 = CARTESIAN_POINT('',(-4.440892098501E-015,4.849742261193));
+#218 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#219 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#220 = ORIENTED_EDGE('',*,*,#59,.F.);
+#221 = ADVANCED_FACE('',(#222,#225),#43,.T.);
+#222 = FACE_BOUND('',#223,.T.);
+#223 = EDGE_LOOP('',(#224));
+#224 = ORIENTED_EDGE('',*,*,#21,.F.);
+#225 = FACE_BOUND('',#226,.T.);
+#226 = EDGE_LOOP('',(#227));
+#227 = ORIENTED_EDGE('',*,*,#228,.F.);
+#228 = EDGE_CURVE('',#229,#229,#231,.T.);
+#229 = VERTEX_POINT('',#230);
+#230 = CARTESIAN_POINT('',(1.65,0.E+000,0.E+000));
+#231 = SURFACE_CURVE('',#232,(#237,#244),.PCURVE_S1.);
+#232 = CIRCLE('',#233,1.65);
+#233 = AXIS2_PLACEMENT_3D('',#234,#235,#236);
+#234 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#235 = DIRECTION('',(0.E+000,0.E+000,1.));
+#236 = DIRECTION('',(1.,0.E+000,0.E+000));
+#237 = PCURVE('',#43,#238);
+#238 = DEFINITIONAL_REPRESENTATION('',(#239),#243);
+#239 = CIRCLE('',#240,1.65);
+#240 = AXIS2_PLACEMENT_2D('',#241,#242);
+#241 = CARTESIAN_POINT('',(-2.8,0.E+000));
+#242 = DIRECTION('',(1.,0.E+000));
+#243 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#244 = PCURVE('',#245,#250);
+#245 = CYLINDRICAL_SURFACE('',#246,1.65);
+#246 = AXIS2_PLACEMENT_3D('',#247,#248,#249);
+#247 = CARTESIAN_POINT('',(0.E+000,0.E+000,0.E+000));
+#248 = DIRECTION('',(-0.E+000,-0.E+000,-1.));
+#249 = DIRECTION('',(1.,0.E+000,0.E+000));
+#250 = DEFINITIONAL_REPRESENTATION('',(#251),#255);
+#251 = LINE('',#252,#253);
+#252 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#253 = VECTOR('',#254,1.);
+#254 = DIRECTION('',(-1.,0.E+000));
+#255 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#256 = ADVANCED_FACE('',(#257),#99,.F.);
+#257 = FACE_BOUND('',#258,.F.);
+#258 = EDGE_LOOP('',(#259,#260,#261));
+#259 = ORIENTED_EDGE('',*,*,#82,.F.);
+#260 = ORIENTED_EDGE('',*,*,#195,.F.);
+#261 = ORIENTED_EDGE('',*,*,#262,.F.);
+#262 = EDGE_CURVE('',#83,#175,#263,.T.);
+#263 = SURFACE_CURVE('',#264,(#268,#275),.PCURVE_S1.);
+#264 = LINE('',#265,#266);
+#265 = CARTESIAN_POINT('',(6.20274,-0.316664,-9.));
+#266 = VECTOR('',#267,1.);
+#267 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#268 = PCURVE('',#99,#269);
+#269 = DEFINITIONAL_REPRESENTATION('',(#270),#274);
+#270 = LINE('',#271,#272);
+#271 = CARTESIAN_POINT('',(3.40274,-0.316664));
+#272 = VECTOR('',#273,1.);
+#273 = DIRECTION('',(-1.,0.E+000));
+#274 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#275 = PCURVE('',#130,#276);
+#276 = DEFINITIONAL_REPRESENTATION('',(#277),#281);
+#277 = LINE('',#278,#279);
+#278 = CARTESIAN_POINT('',(0.E+000,-0.E+000));
+#279 = VECTOR('',#280,1.);
+#280 = DIRECTION('',(1.,0.E+000));
+#281 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#282 = ADVANCED_FACE('',(#283),#130,.T.);
+#283 = FACE_BOUND('',#284,.T.);
+#284 = EDGE_LOOP('',(#285,#286,#287,#308));
+#285 = ORIENTED_EDGE('',*,*,#262,.F.);
+#286 = ORIENTED_EDGE('',*,*,#115,.T.);
+#287 = ORIENTED_EDGE('',*,*,#288,.T.);
+#288 = EDGE_CURVE('',#116,#142,#289,.T.);
+#289 = SURFACE_CURVE('',#290,(#294,#301),.PCURVE_S1.);
+#290 = LINE('',#291,#292);
+#291 = CARTESIAN_POINT('',(6.20274,-0.316664,-3.));
+#292 = VECTOR('',#293,1.);
+#293 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#294 = PCURVE('',#130,#295);
+#295 = DEFINITIONAL_REPRESENTATION('',(#296),#300);
+#296 = LINE('',#297,#298);
+#297 = CARTESIAN_POINT('',(0.E+000,-6.));
+#298 = VECTOR('',#299,1.);
+#299 = DIRECTION('',(1.,0.E+000));
+#300 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#301 = PCURVE('',#158,#302);
+#302 = DEFINITIONAL_REPRESENTATION('',(#303),#307);
+#303 = LINE('',#304,#305);
+#304 = CARTESIAN_POINT('',(-12.286655,4.81333));
+#305 = VECTOR('',#306,1.);
+#306 = DIRECTION('',(1.,0.E+000));
+#307 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#308 = ORIENTED_EDGE('',*,*,#174,.F.);
+#309 = ADVANCED_FACE('',(#310),#158,.T.);
+#310 = FACE_BOUND('',#311,.T.);
+#311 = EDGE_LOOP('',(#312,#313));
+#312 = ORIENTED_EDGE('',*,*,#141,.F.);
+#313 = ORIENTED_EDGE('',*,*,#288,.F.);
+#314 = ADVANCED_FACE('',(#315),#245,.T.);
+#315 = FACE_BOUND('',#316,.F.);
+#316 = EDGE_LOOP('',(#317,#386,#407,#408));
+#317 = ORIENTED_EDGE('',*,*,#318,.T.);
+#318 = EDGE_CURVE('',#319,#319,#321,.T.);
+#319 = VERTEX_POINT('',#320);
+#320 = CARTESIAN_POINT('',(1.65,0.E+000,55.1));
+#321 = SURFACE_CURVE('',#322,(#336,#352),.PCURVE_S1.);
+#322 = B_SPLINE_CURVE_WITH_KNOTS('',12,(#323,#324,#325,#326,#327,#328,
+    #329,#330,#331,#332,#333,#334,#335),.UNSPECIFIED.,.T.,.F.,(13,13),(
+    3.934526114693E-015,10.367255756846),.PIECEWISE_BEZIER_KNOTS.);
+#323 = CARTESIAN_POINT('',(1.65,4.795918283283E-015,55.1));
+#324 = CARTESIAN_POINT('',(1.65,0.851440509037,55.10000000001));
+#325 = CARTESIAN_POINT('',(1.169942675996,1.722397977818,55.09999999996)
+  );
+#326 = CARTESIAN_POINT('',(0.179274312429,2.311085070681,55.100000000095
+    ));
+#327 = CARTESIAN_POINT('',(-1.152068873596,2.18006252434,55.099999999836
+    ));
+#328 = CARTESIAN_POINT('',(-2.101216916284,1.412053249228,
+    55.100000000216));
+#329 = CARTESIAN_POINT('',(-2.776740398872,6.775024985473E-012,
+    55.099999999775));
+#330 = CARTESIAN_POINT('',(-2.101216916284,-1.412053249238,
+    55.100000000186));
+#331 = CARTESIAN_POINT('',(-1.152068873596,-2.180062524334,
+    55.099999999878));
+#332 = CARTESIAN_POINT('',(0.179274312428,-2.311085070682,
+    55.100000000062));
+#333 = CARTESIAN_POINT('',(1.169942675996,-1.722397977819,
+    55.099999999976));
+#334 = CARTESIAN_POINT('',(1.65,-0.851440509036,55.100000000006));
+#335 = CARTESIAN_POINT('',(1.65,-1.342522516079E-013,55.1));
+#336 = PCURVE('',#245,#337);
+#337 = DEFINITIONAL_REPRESENTATION('',(#338),#351);
+#338 = B_SPLINE_CURVE_WITH_KNOTS('',11,(#339,#340,#341,#342,#343,#344,
+    #345,#346,#347,#348,#349,#350),.UNSPECIFIED.,.F.,.F.,(12,12),(
+    3.934526114693E-015,10.367255756846),.PIECEWISE_BEZIER_KNOTS.);
+#339 = CARTESIAN_POINT('',(-3.552713678801E-015,-55.1));
+#340 = CARTESIAN_POINT('',(-0.562935873743,-55.1));
+#341 = CARTESIAN_POINT('',(-1.140889907359,-55.09999999996));
+#342 = CARTESIAN_POINT('',(-1.720018336114,-55.10000000007));
+#343 = CARTESIAN_POINT('',(-2.279520078017,-55.09999999989));
+#344 = CARTESIAN_POINT('',(-2.859077411941,-55.10000000012));
+#345 = CARTESIAN_POINT('',(-3.424107895241,-55.0999999999));
+#346 = CARTESIAN_POINT('',(-4.003665229157,-55.10000000005));
+#347 = CARTESIAN_POINT('',(-4.563166971071,-55.09999999997));
+#348 = CARTESIAN_POINT('',(-5.142295399817,-55.1));
+#349 = CARTESIAN_POINT('',(-5.720249433436,-55.1));
+#350 = CARTESIAN_POINT('',(-6.28318530718,-55.1));
+#351 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#352 = PCURVE('',#353,#380);
+#353 = B_SPLINE_SURFACE_WITH_KNOTS('',1,12,(
+    (#354,#355,#356,#357,#358,#359,#360,#361,#362,#363,#364,#365,#366)
+    ,(#367,#368,#369,#370,#371,#372,#373,#374,#375,#376,#377,#378,#379
+  )),.UNSPECIFIED.,.F.,.T.,.F.,(2,2),(13,13),(0.E+000,10.367255756846),(
+    3.934526114693E-015,10.367255756846),.PIECEWISE_BEZIER_KNOTS.);
+#354 = CARTESIAN_POINT('',(1.65,4.795918283283E-015,55.1));
+#355 = CARTESIAN_POINT('',(1.65,0.851440509037,55.10000000001));
+#356 = CARTESIAN_POINT('',(1.169942675996,1.722397977818,55.09999999996)
+  );
+#357 = CARTESIAN_POINT('',(0.179274312429,2.311085070681,55.100000000095
+    ));
+#358 = CARTESIAN_POINT('',(-1.152068873596,2.18006252434,55.099999999836
+    ));
+#359 = CARTESIAN_POINT('',(-2.101216916284,1.412053249228,
+    55.100000000216));
+#360 = CARTESIAN_POINT('',(-2.776740398872,6.775024985473E-012,
+    55.099999999775));
+#361 = CARTESIAN_POINT('',(-2.101216916284,-1.412053249238,
+    55.100000000186));
+#362 = CARTESIAN_POINT('',(-1.152068873596,-2.180062524334,
+    55.099999999878));
+#363 = CARTESIAN_POINT('',(0.179274312428,-2.311085070682,
+    55.100000000062));
+#364 = CARTESIAN_POINT('',(1.169942675996,-1.722397977819,
+    55.099999999976));
+#365 = CARTESIAN_POINT('',(1.65,-0.851440509036,55.100000000006));
+#366 = CARTESIAN_POINT('',(1.65,-1.342522516079E-013,55.1));
+#367 = CARTESIAN_POINT('',(0.306497115746,-1.346382590461E-015,
+    58.343502884254));
+#368 = CARTESIAN_POINT('',(0.306497115746,0.158160036514,58.343502884261
+    ));
+#369 = CARTESIAN_POINT('',(0.21732367017,0.319945462041,58.343502884226)
+  );
+#370 = CARTESIAN_POINT('',(3.330124829564E-002,0.429297520247,
+    58.343502884322));
+#371 = CARTESIAN_POINT('',(-0.214003507213,0.404959318697,
+    58.343502884141));
+#372 = CARTESIAN_POINT('',(-0.390313287507,0.262297120108,
+    58.343502884398));
+#373 = CARTESIAN_POINT('',(-0.515795711177,-7.178146965714E-012,
+    58.343502884112));
+#374 = CARTESIAN_POINT('',(-0.390313287504,-0.262297120096,
+    58.343502884365));
+#375 = CARTESIAN_POINT('',(-0.214003507218,-0.404959318703,
+    58.343502884187));
+#376 = CARTESIAN_POINT('',(3.330124829826E-002,-0.429297520245,
+    58.343502884287));
+#377 = CARTESIAN_POINT('',(0.217323670169,-0.319945462041,
+    58.343502884242));
+#378 = CARTESIAN_POINT('',(0.306497115746,-0.158160036514,
+    58.343502884257));
+#379 = CARTESIAN_POINT('',(0.306497115746,1.555167359982E-014,
+    58.343502884254));
+#380 = DEFINITIONAL_REPRESENTATION('',(#381),#385);
+#381 = LINE('',#382,#383);
+#382 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#383 = VECTOR('',#384,1.);
+#384 = DIRECTION('',(0.E+000,1.));
+#385 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#386 = ORIENTED_EDGE('',*,*,#387,.F.);
+#387 = EDGE_CURVE('',#229,#319,#388,.T.);
+#388 = SEAM_CURVE('',#389,(#393,#400),.PCURVE_S1.);
+#389 = LINE('',#390,#391);
+#390 = CARTESIAN_POINT('',(1.65,0.E+000,0.E+000));
+#391 = VECTOR('',#392,1.);
+#392 = DIRECTION('',(0.E+000,0.E+000,1.));
+#393 = PCURVE('',#245,#394);
+#394 = DEFINITIONAL_REPRESENTATION('',(#395),#399);
+#395 = LINE('',#396,#397);
+#396 = CARTESIAN_POINT('',(-0.E+000,0.E+000));
+#397 = VECTOR('',#398,1.);
+#398 = DIRECTION('',(-0.E+000,-1.));
+#399 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#400 = PCURVE('',#245,#401);
+#401 = DEFINITIONAL_REPRESENTATION('',(#402),#406);
+#402 = LINE('',#403,#404);
+#403 = CARTESIAN_POINT('',(-6.28318530718,0.E+000));
+#404 = VECTOR('',#405,1.);
+#405 = DIRECTION('',(-0.E+000,-1.));
+#406 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#407 = ORIENTED_EDGE('',*,*,#228,.F.);
+#408 = ORIENTED_EDGE('',*,*,#387,.T.);
+#409 = ADVANCED_FACE('',(#410),#353,.F.);
+#410 = FACE_BOUND('',#411,.F.);
+#411 = EDGE_LOOP('',(#412,#432,#539,#540));
+#412 = ORIENTED_EDGE('',*,*,#413,.T.);
+#413 = EDGE_CURVE('',#319,#414,#416,.T.);
+#414 = VERTEX_POINT('',#415);
+#415 = CARTESIAN_POINT('',(0.306497115746,0.E+000,58.343502884254));
+#416 = SEAM_CURVE('',#417,(#420,#426),.PCURVE_S1.);
+#417 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#418,#419),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(0.E+000,10.367255756846),.PIECEWISE_BEZIER_KNOTS.);
+#418 = CARTESIAN_POINT('',(1.65,4.795918283283E-015,55.1));
+#419 = CARTESIAN_POINT('',(0.306497115746,-1.346382590461E-015,
+    58.343502884254));
+#420 = PCURVE('',#353,#421);
+#421 = DEFINITIONAL_REPRESENTATION('',(#422),#425);
+#422 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#423,#424),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(0.E+000,10.367255756846),.PIECEWISE_BEZIER_KNOTS.);
+#423 = CARTESIAN_POINT('',(0.E+000,3.934526114693E-015));
+#424 = CARTESIAN_POINT('',(10.367255756846,3.934526114693E-015));
+#425 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#426 = PCURVE('',#353,#427);
+#427 = DEFINITIONAL_REPRESENTATION('',(#428),#431);
+#428 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#429,#430),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(0.E+000,10.367255756846),.PIECEWISE_BEZIER_KNOTS.);
+#429 = CARTESIAN_POINT('',(0.E+000,10.367255756846));
+#430 = CARTESIAN_POINT('',(10.367255756846,10.367255756846));
+#431 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#432 = ORIENTED_EDGE('',*,*,#433,.T.);
+#433 = EDGE_CURVE('',#414,#414,#434,.T.);
+#434 = SURFACE_CURVE('',#435,(#449,#456),.PCURVE_S1.);
+#435 = B_SPLINE_CURVE_WITH_KNOTS('',12,(#436,#437,#438,#439,#440,#441,
+    #442,#443,#444,#445,#446,#447,#448),.UNSPECIFIED.,.T.,.F.,(13,13),(
+    3.934526114693E-015,10.367255756846),.PIECEWISE_BEZIER_KNOTS.);
+#436 = CARTESIAN_POINT('',(0.306497115746,-1.346382590461E-015,
+    58.343502884254));
+#437 = CARTESIAN_POINT('',(0.306497115746,0.158160036514,58.343502884261
+    ));
+#438 = CARTESIAN_POINT('',(0.21732367017,0.319945462041,58.343502884226)
+  );
+#439 = CARTESIAN_POINT('',(3.330124829564E-002,0.429297520247,
+    58.343502884322));
+#440 = CARTESIAN_POINT('',(-0.214003507213,0.404959318697,
+    58.343502884141));
+#441 = CARTESIAN_POINT('',(-0.390313287507,0.262297120108,
+    58.343502884398));
+#442 = CARTESIAN_POINT('',(-0.515795711177,-7.178146965714E-012,
+    58.343502884112));
+#443 = CARTESIAN_POINT('',(-0.390313287504,-0.262297120096,
+    58.343502884365));
+#444 = CARTESIAN_POINT('',(-0.214003507218,-0.404959318703,
+    58.343502884187));
+#445 = CARTESIAN_POINT('',(3.330124829826E-002,-0.429297520245,
+    58.343502884287));
+#446 = CARTESIAN_POINT('',(0.217323670169,-0.319945462041,
+    58.343502884242));
+#447 = CARTESIAN_POINT('',(0.306497115746,-0.158160036514,
+    58.343502884257));
+#448 = CARTESIAN_POINT('',(0.306497115746,1.555167359982E-014,
+    58.343502884254));
+#449 = PCURVE('',#353,#450);
+#450 = DEFINITIONAL_REPRESENTATION('',(#451),#455);
+#451 = LINE('',#452,#453);
+#452 = CARTESIAN_POINT('',(10.367255756846,0.E+000));
+#453 = VECTOR('',#454,1.);
+#454 = DIRECTION('',(0.E+000,1.));
+#455 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#456 = PCURVE('',#457,#462);
+#457 = CONICAL_SURFACE('',#458,1.65,0.785398163397);
+#458 = AXIS2_PLACEMENT_3D('',#459,#460,#461);
+#459 = CARTESIAN_POINT('',(0.E+000,0.E+000,57.));
+#460 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#461 = DIRECTION('',(1.,0.E+000,0.E+000));
+#462 = DEFINITIONAL_REPRESENTATION('',(#463),#538);
+#463 = B_SPLINE_CURVE_WITH_KNOTS('',10,(#464,#465,#466,#467,#468,#469,
+    #470,#471,#472,#473,#474,#475,#476,#477,#478,#479,#480,#481,#482,
+    #483,#484,#485,#486,#487,#488,#489,#490,#491,#492,#493,#494,#495,
+    #496,#497,#498,#499,#500,#501,#502,#503,#504,#505,#506,#507,#508,
+    #509,#510,#511,#512,#513,#514,#515,#516,#517,#518,#519,#520,#521,
+    #522,#523,#524,#525,#526,#527,#528,#529,#530,#531,#532,#533,#534,
+    #535,#536,#537),.UNSPECIFIED.,.F.,.F.,(11,9,9,9,9,9,9,9,11),(
+    3.934526114693E-015,0.647953484803,1.295906969606,2.591813939212,
+    5.183627878423,7.775441817635,9.07134878724,9.719302272043,
+    10.367255756846),.UNSPECIFIED.);
+#464 = CARTESIAN_POINT('',(3.996802888651E-015,-1.343502884254));
+#465 = CARTESIAN_POINT('',(-3.870184131985E-002,-1.343502884254));
+#466 = CARTESIAN_POINT('',(-7.747207437316E-002,-1.343502884254));
+#467 = CARTESIAN_POINT('',(-0.116311983862,-1.343502884255));
+#468 = CARTESIAN_POINT('',(-0.155199560646,-1.343502884254));
+#469 = CARTESIAN_POINT('',(-0.194173940173,-1.343502884255));
+#470 = CARTESIAN_POINT('',(-0.233177507046,-1.343502884254));
+#471 = CARTESIAN_POINT('',(-0.272243564908,-1.343502884255));
+#472 = CARTESIAN_POINT('',(-0.311349197776,-1.343502884254));
+#473 = CARTESIAN_POINT('',(-0.350494944407,-1.343502884254));
+#474 = CARTESIAN_POINT('',(-0.428855789897,-1.343502884254));
+#475 = CARTESIAN_POINT('',(-0.468070907639,-1.343502884254));
+#476 = CARTESIAN_POINT('',(-0.507316364303,-1.343502884254));
+#477 = CARTESIAN_POINT('',(-0.546588036349,-1.343502884255));
+#478 = CARTESIAN_POINT('',(-0.585882143229,-1.343502884254));
+#479 = CARTESIAN_POINT('',(-0.62519530651,-1.343502884255));
+#480 = CARTESIAN_POINT('',(-0.66452455767,-1.343502884254));
+#481 = CARTESIAN_POINT('',(-0.703867294558,-1.343502884255));
+#482 = CARTESIAN_POINT('',(-0.743221186524,-1.343502884254));
+#483 = CARTESIAN_POINT('',(-0.861309711629,-1.343502884254));
+#484 = CARTESIAN_POINT('',(-0.940071280906,-1.343502884254));
+#485 = CARTESIAN_POINT('',(-1.018852028505,-1.343502884255));
+#486 = CARTESIAN_POINT('',(-1.097638746169,-1.343502884254));
+#487 = CARTESIAN_POINT('',(-1.176421197475,-1.343502884255));
+#488 = CARTESIAN_POINT('',(-1.255191695248,-1.343502884254));
+#489 = CARTESIAN_POINT('',(-1.333944783845,-1.343502884254));
+#490 = CARTESIAN_POINT('',(-1.412677026315,-1.343502884254));
+#491 = CARTESIAN_POINT('',(-1.491386896422,-1.343502884254));
+#492 = CARTESIAN_POINT('',(-1.727450533805,-1.343502884254));
+#493 = CARTESIAN_POINT('',(-1.884738301553,-1.343502884254));
+#494 = CARTESIAN_POINT('',(-2.041937750778,-1.343502884254));
+#495 = CARTESIAN_POINT('',(-2.19907733283,-1.343502884254));
+#496 = CARTESIAN_POINT('',(-2.356188502095,-1.343502884254));
+#497 = CARTESIAN_POINT('',(-2.513287619804,-1.343502884254));
+#498 = CARTESIAN_POINT('',(-2.670375285396,-1.343502884254));
+#499 = CARTESIAN_POINT('',(-2.827450146826,-1.343502884254));
+#500 = CARTESIAN_POINT('',(-2.984521545264,-1.343502884254));
+#501 = CARTESIAN_POINT('',(-3.298663761915,-1.343502884254));
+#502 = CARTESIAN_POINT('',(-3.455735160353,-1.343502884254));
+#503 = CARTESIAN_POINT('',(-3.612810021784,-1.343502884254));
+#504 = CARTESIAN_POINT('',(-3.769897687376,-1.343502884255));
+#505 = CARTESIAN_POINT('',(-3.926996805085,-1.343502884254));
+#506 = CARTESIAN_POINT('',(-4.084107974349,-1.343502884254));
+#507 = CARTESIAN_POINT('',(-4.241247556401,-1.343502884254));
+#508 = CARTESIAN_POINT('',(-4.398447005627,-1.343502884254));
+#509 = CARTESIAN_POINT('',(-4.555734773374,-1.343502884254));
+#510 = CARTESIAN_POINT('',(-4.791798410757,-1.343502884254));
+#511 = CARTESIAN_POINT('',(-4.870508280864,-1.343502884254));
+#512 = CARTESIAN_POINT('',(-4.949240523335,-1.343502884255));
+#513 = CARTESIAN_POINT('',(-5.02799361193,-1.343502884254));
+#514 = CARTESIAN_POINT('',(-5.106764109706,-1.343502884255));
+#515 = CARTESIAN_POINT('',(-5.18554656101,-1.343502884254));
+#516 = CARTESIAN_POINT('',(-5.264333278675,-1.343502884254));
+#517 = CARTESIAN_POINT('',(-5.343114026274,-1.343502884254));
+#518 = CARTESIAN_POINT('',(-5.42187559555,-1.343502884254));
+#519 = CARTESIAN_POINT('',(-5.539964120656,-1.343502884254));
+#520 = CARTESIAN_POINT('',(-5.579318012621,-1.343502884254));
+#521 = CARTESIAN_POINT('',(-5.618660749511,-1.343502884255));
+#522 = CARTESIAN_POINT('',(-5.657990000666,-1.343502884254));
+#523 = CARTESIAN_POINT('',(-5.697303163955,-1.343502884255));
+#524 = CARTESIAN_POINT('',(-5.736597270827,-1.343502884254));
+#525 = CARTESIAN_POINT('',(-5.775868942878,-1.343502884255));
+#526 = CARTESIAN_POINT('',(-5.815114399539,-1.343502884254));
+#527 = CARTESIAN_POINT('',(-5.854329517283,-1.343502884254));
+#528 = CARTESIAN_POINT('',(-5.932690362773,-1.343502884254));
+#529 = CARTESIAN_POINT('',(-5.971836109402,-1.343502884254));
+#530 = CARTESIAN_POINT('',(-6.010941742273,-1.343502884255));
+#531 = CARTESIAN_POINT('',(-6.05000780013,-1.343502884254));
+#532 = CARTESIAN_POINT('',(-6.08901136701,-1.343502884255));
+#533 = CARTESIAN_POINT('',(-6.127985746531,-1.343502884254));
+#534 = CARTESIAN_POINT('',(-6.16687332332,-1.343502884255));
+#535 = CARTESIAN_POINT('',(-6.205713232806,-1.343502884254));
+#536 = CARTESIAN_POINT('',(-6.24448346586,-1.343502884254));
+#537 = CARTESIAN_POINT('',(-6.28318530718,-1.343502884254));
+#538 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#539 = ORIENTED_EDGE('',*,*,#413,.F.);
+#540 = ORIENTED_EDGE('',*,*,#318,.F.);
+#541 = ADVANCED_FACE('',(#542),#457,.T.);
+#542 = FACE_BOUND('',#543,.T.);
+#543 = EDGE_LOOP('',(#544,#565,#566,#567));
+#544 = ORIENTED_EDGE('',*,*,#545,.F.);
+#545 = EDGE_CURVE('',#414,#546,#548,.T.);
+#546 = VERTEX_POINT('',#547);
+#547 = CARTESIAN_POINT('',(0.25,0.E+000,58.4));
+#548 = SEAM_CURVE('',#549,(#553,#559),.PCURVE_S1.);
+#549 = LINE('',#550,#551);
+#550 = CARTESIAN_POINT('',(1.65,0.E+000,57.));
+#551 = VECTOR('',#552,1.);
+#552 = DIRECTION('',(-0.707106781187,0.E+000,0.707106781187));
+#553 = PCURVE('',#457,#554);
+#554 = DEFINITIONAL_REPRESENTATION('',(#555),#558);
+#555 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#556,#557),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(0.E+000,1.979898987322),.PIECEWISE_BEZIER_KNOTS.);
+#556 = CARTESIAN_POINT('',(0.E+000,0.E+000));
+#557 = CARTESIAN_POINT('',(0.E+000,-1.4));
+#558 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#559 = PCURVE('',#457,#560);
+#560 = DEFINITIONAL_REPRESENTATION('',(#561),#564);
+#561 = B_SPLINE_CURVE_WITH_KNOTS('',1,(#562,#563),.UNSPECIFIED.,.F.,.F.,
+  (2,2),(0.E+000,1.979898987322),.PIECEWISE_BEZIER_KNOTS.);
+#562 = CARTESIAN_POINT('',(-6.28318530718,0.E+000));
+#563 = CARTESIAN_POINT('',(-6.28318530718,-1.4));
+#564 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#565 = ORIENTED_EDGE('',*,*,#433,.T.);
+#566 = ORIENTED_EDGE('',*,*,#545,.T.);
+#567 = ORIENTED_EDGE('',*,*,#568,.F.);
+#568 = EDGE_CURVE('',#546,#546,#569,.T.);
+#569 = SURFACE_CURVE('',#570,(#575,#582),.PCURVE_S1.);
+#570 = CIRCLE('',#571,0.25);
+#571 = AXIS2_PLACEMENT_3D('',#572,#573,#574);
+#572 = CARTESIAN_POINT('',(0.E+000,0.E+000,58.4));
+#573 = DIRECTION('',(0.E+000,0.E+000,1.));
+#574 = DIRECTION('',(1.,0.E+000,0.E+000));
+#575 = PCURVE('',#457,#576);
+#576 = DEFINITIONAL_REPRESENTATION('',(#577),#581);
+#577 = LINE('',#578,#579);
+#578 = CARTESIAN_POINT('',(-0.E+000,-1.4));
+#579 = VECTOR('',#580,1.);
+#580 = DIRECTION('',(-1.,-0.E+000));
+#581 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#582 = PCURVE('',#583,#588);
+#583 = PLANE('',#584);
+#584 = AXIS2_PLACEMENT_3D('',#585,#586,#587);
+#585 = CARTESIAN_POINT('',(1.65,0.E+000,58.4));
+#586 = DIRECTION('',(0.E+000,0.E+000,-1.));
+#587 = DIRECTION('',(-1.,0.E+000,0.E+000));
+#588 = DEFINITIONAL_REPRESENTATION('',(#589),#597);
+#589 = ( BOUNDED_CURVE() B_SPLINE_CURVE(2,(#590,#591,#592,#593,#594,#595
+,#596),.UNSPECIFIED.,.F.,.F.) B_SPLINE_CURVE_WITH_KNOTS((1,2,2,2,2,1),(
+    -2.094395102393,0.E+000,2.094395102393,4.188790204786,6.28318530718,
+8.377580409573),.UNSPECIFIED.) CURVE() GEOMETRIC_REPRESENTATION_ITEM() 
+RATIONAL_B_SPLINE_CURVE((1.,0.5,1.,0.5,1.,0.5,1.)) REPRESENTATION_ITEM(
+  '') );
+#590 = CARTESIAN_POINT('',(1.4,0.E+000));
+#591 = CARTESIAN_POINT('',(1.4,0.433012701892));
+#592 = CARTESIAN_POINT('',(1.775,0.216506350946));
+#593 = CARTESIAN_POINT('',(2.15,6.123233995737E-017));
+#594 = CARTESIAN_POINT('',(1.775,-0.216506350946));
+#595 = CARTESIAN_POINT('',(1.4,-0.433012701892));
+#596 = CARTESIAN_POINT('',(1.4,0.E+000));
+#597 = ( GEOMETRIC_REPRESENTATION_CONTEXT(2) 
+PARAMETRIC_REPRESENTATION_CONTEXT() REPRESENTATION_CONTEXT('2D SPACE',''
+  ) );
+#598 = ADVANCED_FACE('',(#599),#583,.F.);
+#599 = FACE_BOUND('',#600,.F.);
+#600 = EDGE_LOOP('',(#601));
+#601 = ORIENTED_EDGE('',*,*,#568,.F.);
+#602 = ( GEOMETRIC_REPRESENTATION_CONTEXT(3) 
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#606)) GLOBAL_UNIT_ASSIGNED_CONTEXT
+((#603,#604,#605)) REPRESENTATION_CONTEXT('Context #1',
+  '3D Context with UNIT and UNCERTAINTY') );
+#603 = ( LENGTH_UNIT() NAMED_UNIT(*) SI_UNIT(.MILLI.,.METRE.) );
+#604 = ( NAMED_UNIT(*) PLANE_ANGLE_UNIT() SI_UNIT($,.RADIAN.) );
+#605 = ( NAMED_UNIT(*) SI_UNIT($,.STERADIAN.) SOLID_ANGLE_UNIT() );
+#606 = UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.E-005),#603,
+  'distance_accuracy_value','confusion accuracy');
+#607 = PRODUCT_TYPE('part',$,(#7));
+#608 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#609)
+  ,#602);
+#609 = STYLED_ITEM('color',(#610),#15);
+#610 = PRESENTATION_STYLE_ASSIGNMENT((#611,#617));
+#611 = SURFACE_STYLE_USAGE(.BOTH.,#612);
+#612 = SURFACE_SIDE_STYLE('',(#613));
+#613 = SURFACE_STYLE_FILL_AREA(#614);
+#614 = FILL_AREA_STYLE('',(#615));
+#615 = FILL_AREA_STYLE_COLOUR('',#616);
+#616 = COLOUR_RGB('',0.800000011921,0.800000011921,0.800000011921);
+#617 = CURVE_STYLE('',#618,POSITIVE_LENGTH_MEASURE(0.1),#616);
+#618 = DRAUGHTING_PRE_DEFINED_CURVE_FONT('continuous');
+ENDSEC;
+END-ISO-10303-21;