Adding AR-15 Treillage Stock by Warfairy.

2016-04-19 04:16:47 -07:00 · 2016-04-19 04:16:47 -07:00 · 2ff9a1aa8e
parent bde24a6940
commit 2ff9a1aa8e
29 changed files with 110704 additions and 0 deletions
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/README.md
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/README.md
@ -0,0 +1,44 @@
 # Treillage AR-15 Competition Stock 
 #### Version
 1.0
 #### Author
 Warfairy
 #### Description
 The Treillage AR-15 Competition Stock is meant to bring a low cost option to NRA High Power competition and 3-Gun for fully adjustable stocks. The milled ones I've seen go for 180 USD or more. What it does is give you a fully adjustable stock, including length of pull, camber, and cast. The clamp around the tube allows the user to move the stock arm 360 degrees around the buffer tube, the clamp around the stock arm allows the user to adjust the length of pull and angle of the rear plate, and finally, the rear plate is adjusted using a threaded rod to move the rear plate up and down in relation to the stock arm. You can now truly make your rifle fit your body with around 15 USD worth of materials.
 #### Required parts
 * 8x M3 16mm Socket Head Cap Screw (McMaster part number 95263A158)
 * 8x Type 316 Stainless Steel Belleville Spring Lock Washer (McMaster part number 93237A102)
 * 8x Zinc Yellow-Chromate Plated Steel Hex Nut (McMaster part number 92497A200)
 #### Printing
 All of the individual parts should be relatively easy prints. Ensure your support is on as there are overhangs on most of the parts.
 #### Assembly
 1. Place Rear_Adjust into slot of Arm. The threaded section should sit inside the channel of the Arm.
 2. Place Rear_Plate onto Arm assembly and thread Rear_Adjust into threaded tab of Rear_Plate, drawing it down until the top and bottom surfaces of Arm and Rear_Plate are approximately level.
 3. Place Base_2 onto the underside of your Carbine Buffer Tube, making sure that the peg rests in the rear most adjustment hole of the Buffer Tube Rail. Now Place Base_1 onto the top of the buffer tube such that the grooves in the Base align.
 4. Place Clamp_2 over the Base ring, ensuring smooth mating of the ridges with the grooves. Do the same with Clamp_1. Secure losely by placing nuts into appropriate slots in Clamp_1, and threading 16mm M3 screws and washers to clamp in place.
 5. Install Clamp_3 onto buffer tube assembly using same method as Clamp_1 and 2. Leave loose. Slide Arm Assembly into the clamp and lightly tighten Clamp assmebly onto the Arm.
 6. Adjust stock as desired. When optimum position is attained, tighten down all 8 M3 screws to lock in place. Rear_Plate may be adjusted using a coin or large screw driver. Installation is complete.
 #### Author's notes
 I really like this one, and I hope it works. All credit to duces of the #FOSSCAD channel on irc.oftc.net for the idea. If you have questions, concerns, gripes, complaints, or just want to talk to us, swing by www.fosscad.org/fc/chat
 As always,
 You are free men. Act like it.
 -WarFairy
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.10.jpg
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.10.jpg
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.11.jpg
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.11.jpg
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.8.jpg
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.8.jpg
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.9.jpg
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/Renders/untitled.9.jpg
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Arm.SLDPRT
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Arm.SLDPRT
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_1.SLDPRT
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_1.SLDPRT
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_2.SLDPRT
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Base_2.SLDPRT
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_1.SLDPRT
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_1.SLDPRT
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_2.SLDPRT
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_2.SLDPRT
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_3.SLDPRT
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Clamp_3.SLDPRT
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Adjust.SLDPRT
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Adjust.SLDPRT
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Plate.SLDPRT
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/SLDPRT/Treillage_Rear_Plate.SLDPRT
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Arm.step
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Arm.step
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_1.step
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_1.step
@ -0,0 +1,504 @@
 ISO-10303-21;
 HEADER;
 FILE_DESCRIPTION (( 'STEP AP214' ),
    '1' );
 FILE_NAME ('Trellais_Base_1.step',
    '2016-04-19T10:44:26',
    ( 'WarFairy' ),
    ( '' ),
    'SwSTEP 2.0',
    'SolidWorks 2015',
    '' );
 FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
 ENDSEC;
 DATA;
 #1 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #2 = ORIENTED_EDGE ( 'NONE', *, *, #242, .T. ) ;
 #3 = STYLED_ITEM ( 'NONE', ( #381 ), #236 ) ;
 #4 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #5 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #6 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #7 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #14 ) ;
 #8 = ORIENTED_EDGE ( 'NONE', *, *, #282, .F. ) ;
 #9 = ORIENTED_EDGE ( 'NONE', *, *, #201, .T. ) ;
 #10 = AXIS2_PLACEMENT_3D ( 'NONE', #220, #64, #298 ) ;
 #11 = AXIS2_PLACEMENT_3D ( 'NONE', #458, #473, #467 ) ;
 #12 = ADVANCED_FACE ( 'NONE', ( #435 ), #230, .T. ) ;
 #13 = EDGE_LOOP ( 'NONE', ( #472, #437, #88, #39 ) ) ;
 #14 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
 #15 = AXIS2_PLACEMENT_3D ( 'NONE', #422, #188, #1 ) ;
 #16 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #17 = ADVANCED_FACE ( 'NONE', ( #464 ), #285, .T. ) ;
 #18 = PRODUCT_CONTEXT ( 'NONE', #59, 'mechanical' ) ;
 #19 = PLANE ( 'NONE',  #436 ) ;
 #20 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #21 = ORIENTED_EDGE ( 'NONE', *, *, #174, .F. ) ;
 #22 = VERTEX_POINT ( 'NONE', #5 ) ;
 #23 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #24 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
 #25 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #26 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
 #27 = AXIS2_PLACEMENT_3D ( 'NONE', #96, #311, #124 ) ;
 #28 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #29 = ORIENTED_EDGE ( 'NONE', *, *, #319, .F. ) ;
 #30 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #31 = AXIS2_PLACEMENT_3D ( 'NONE', #146, #23, #20 ) ;
 #32 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #33 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ;
 #34 = SURFACE_SIDE_STYLE ('',( #385 ) ) ;
 #35 = AXIS2_PLACEMENT_3D ( 'NONE', #91, #274, #468 ) ;
 #36 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #37 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #38 = ORIENTED_EDGE ( 'NONE', *, *, #160, .T. ) ;
 #39 = ORIENTED_EDGE ( 'NONE', *, *, #180, .T. ) ;
 #40 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #41 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #237, #42 ) ;
 #42 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #43 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ;
 #44 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
 #45 = AXIS2_PLACEMENT_3D ( 'NONE', #179, #480, #216 ) ;
 #46 =( CONVERSION_BASED_UNIT ( 'INCH', #299 ) LENGTH_UNIT ( ) NAMED_UNIT ( #116 ) );
 #47 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #74, #62 ) ;
 #48 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #105, #77 ) ;
 #49 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
 #50 = ADVANCED_FACE ( 'NONE', ( #457 ), #452, .T. ) ;
 #51 = SURFACE_STYLE_USAGE ( .BOTH. , #53 ) ;
 #52 = ORIENTED_EDGE ( 'NONE', *, *, #277, .F. ) ;
 #53 = SURFACE_SIDE_STYLE ('',( #308 ) ) ;
 #54 = AXIS2_PLACEMENT_3D ( 'NONE', #73, #438, #192 ) ;
 #55 = FILL_AREA_STYLE ('',( #86 ) ) ;
 #56 = ORIENTED_EDGE ( 'NONE', *, *, #250, .T. ) ;
 #57 = EDGE_LOOP ( 'NONE', ( #301, #270, #29, #466 ) ) ;
 #58 = VERTEX_POINT ( 'NONE', #373 ) ;
 #59 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
 #60 = AXIS2_PLACEMENT_3D ( 'NONE', #297, #30, #300 ) ;
 #61 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #59 ) ;
 #62 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #14, 'design' ) ;
 #63 = ORIENTED_EDGE ( 'NONE', *, *, #304, .F. ) ;
 #64 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #65 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #200 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #279, #98, #314 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
 #66 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #67 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
 #68 = ORIENTED_EDGE ( 'NONE', *, *, #248, .F. ) ;
 #69 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #70 = EDGE_LOOP ( 'NONE', ( #485, #21, #78, #80, #302, #397, #79, #233, #432, #474, #2, #195 ) ) ;
 #71 = PRODUCT ( 'Trellais_Base_1', 'Trellais_Base_1', '', ( #18 ) ) ;
 #72 = AXIS2_PLACEMENT_3D ( 'NONE', #433, #161, #254 ) ;
 #73 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #74 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #71, .NOT_KNOWN. ) ;
 #75 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ;
 #76 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #77 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #78 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ;
 #79 = ORIENTED_EDGE ( 'NONE', *, *, #234, .T. ) ;
 #80 = ORIENTED_EDGE ( 'NONE', *, *, #360, .F. ) ;
 #81 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #126, #128 ) ;
 #82 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #410, #396 ) ;
 #83 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
 #84 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
 #85 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #280, #232 ) ;
 #86 = FILL_AREA_STYLE_COLOUR ( '', #312 ) ;
 #87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
 #88 = ORIENTED_EDGE ( 'NONE', *, *, #350, .F. ) ;
 #89 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #90 =( CONVERSION_BASED_UNIT ( 'INCH', #318 ) LENGTH_UNIT ( ) NAMED_UNIT ( #44 ) );
 #91 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #92 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #93 = EDGE_LOOP ( 'NONE', ( #137, #246, #240, #225 ) ) ;
 #94 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #71 ) ) ;
 #95 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #96 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #97 = EDGE_LOOP ( 'NONE', ( #430, #486, #455, #184, #295, #224, #114, #245, #149, #487, #9, #460 ) ) ;
 #98 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
 #99 = AXIS2_PLACEMENT_3D ( 'NONE', #317, #284, #40 ) ;
 #100 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #101 = AXIS2_PLACEMENT_3D ( 'NONE', #208, #214, #218 ) ;
 #102 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ;
 #103 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ;
 #104 = ORIENTED_EDGE ( 'NONE', *, *, #325, .F. ) ;
 #105 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #106 = ADVANCED_FACE ( 'NONE', ( #459 ), #450, .T. ) ;
 #107 = ORIENTED_EDGE ( 'NONE', *, *, #242, .F. ) ;
 #108 = ADVANCED_FACE ( 'NONE', ( #453 ), #227, .F. ) ;
 #109 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #110 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #375, #440 ) ;
 #111 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #112 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #113 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #46, 'distance_accuracy_value', 'NONE');
 #114 = ORIENTED_EDGE ( 'NONE', *, *, #282, .T. ) ;
 #115 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #116 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
 #117 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #118 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #119 = ORIENTED_EDGE ( 'NONE', *, *, #319, .T. ) ;
 #120 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ;
 #121 = AXIS2_PLACEMENT_3D ( 'NONE', #247, #244, #243 ) ;
 #122 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #123 = VERTEX_POINT ( 'NONE', #37 ) ;
 #124 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #125 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #3 ) ) ;
 #126 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #127 = EDGE_CURVE ( 'NONE', #348, #421, #454, .T. ) ;
 #128 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #129 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #130 = EDGE_LOOP ( 'NONE', ( #104, #38, #119, #145 ) ) ;
 #131 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #132 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #133 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #134 = EDGE_CURVE ( 'NONE', #283, #58, #461, .T. ) ;
 #135 = ORIENTED_EDGE ( 'NONE', *, *, #250, .F. ) ;
 #136 = VERTEX_POINT ( 'NONE', #197 ) ;
 #137 = ORIENTED_EDGE ( 'NONE', *, *, #219, .T. ) ;
 #138 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #139 = ADVANCED_FACE ( 'NONE', ( #444 ), #441, .T. ) ;
 #140 = AXIS2_PLACEMENT_3D ( 'NONE', #293, #290, #305 ) ;
 #141 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #142 = PLANE ( 'NONE',  #264 ) ;
 #143 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #144 = EDGE_CURVE ( 'NONE', #405, #123, #451, .T. ) ;
 #145 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ;
 #146 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #147 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #148 = CLOSED_SHELL ( 'NONE', ( #108, #294, #139, #106, #173, #262, #207, #50, #456, #241, #337, #17, #169, #12 ) ) ;
 #149 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ;
 #150 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #151 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #152 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #153 = EDGE_CURVE ( 'NONE', #462, #276, #445, .T. ) ;
 #154 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #155 = ORIENTED_EDGE ( 'NONE', *, *, #313, .T. ) ;
 #156 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #157 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #158 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Base_1', ( #236, #31 ), #249 ) ;
 #159 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ;
 #160 = EDGE_CURVE ( 'NONE', #289, #265, #439, .T. ) ;
 #161 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #162 = AXIS2_PLACEMENT_3D ( 'NONE', #215, #212, #206 ) ;
 #163 = VERTEX_POINT ( 'NONE', #129 ) ;
 #164 = EDGE_CURVE ( 'NONE', #475, #22, #425, .T. ) ;
 #165 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #166 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #167 = VERTEX_POINT ( 'NONE', #287 ) ;
 #168 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #169 = ADVANCED_FACE ( 'NONE', ( #427 ), #257, .T. ) ;
 #170 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #171 = EDGE_CURVE ( 'NONE', #407, #193, #418, .T. ) ;
 #172 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #173 = ADVANCED_FACE ( 'NONE', ( #415 ), #380, .T. ) ;
 #174 = EDGE_CURVE ( 'NONE', #475, #309, #414, .T. ) ;
 #175 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #176 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #177 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #178 = ORIENTED_EDGE ( 'NONE', *, *, #201, .F. ) ;
 #179 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #180 = EDGE_CURVE ( 'NONE', #123, #470, #416, .T. ) ;
 #181 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #182 = EDGE_LOOP ( 'NONE', ( #63, #221, #75, #43 ) ) ;
 #183 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #184 = ORIENTED_EDGE ( 'NONE', *, *, #277, .T. ) ;
 #185 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #186 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #90, 'distance_accuracy_value', 'NONE');
 #187 = EDGE_CURVE ( 'NONE', #470, #475, #413, .T. ) ;
 #188 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #189 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ;
 #190 = EDGE_CURVE ( 'NONE', #462, #421, #419, .T. ) ;
 #191 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #192 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #193 = VERTEX_POINT ( 'NONE', #89 ) ;
 #194 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #195 = ORIENTED_EDGE ( 'NONE', *, *, #304, .T. ) ;
 #196 = EDGE_CURVE ( 'NONE', #265, #315, #401, .T. ) ;
 #197 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #198 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #199 = ORIENTED_EDGE ( 'NONE', *, *, #144, .T. ) ;
 #200 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #279, 'distance_accuracy_value', 'NONE');
 #201 = EDGE_CURVE ( 'NONE', #283, #470, #402, .T. ) ;
 #202 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
 #203 = ORIENTED_EDGE ( 'NONE', *, *, #127, .F. ) ;
 #204 = AXIS2_PLACEMENT_3D ( 'NONE', #176, #175, #172 ) ;
 #205 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #206 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #207 = ADVANCED_FACE ( 'NONE', ( #399 ), #392, .T. ) ;
 #208 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #209 = EDGE_CURVE ( 'NONE', #315, #477, #393, .T. ) ;
 #210 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #211 = ORIENTED_EDGE ( 'NONE', *, *, #350, .T. ) ;
 #212 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #213 = EDGE_CURVE ( 'NONE', #289, #278, #404, .T. ) ;
 #214 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #215 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #216 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #217 = ORIENTED_EDGE ( 'NONE', *, *, #153, .F. ) ;
 #218 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #219 = EDGE_CURVE ( 'NONE', #22, #283, #395, .T. ) ;
 #220 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #221 = ORIENTED_EDGE ( 'NONE', *, *, #313, .F. ) ;
 #222 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #223 = FILL_AREA_STYLE ('',( #423 ) ) ;
 #224 = ORIENTED_EDGE ( 'NONE', *, *, #255, .F. ) ;
 #225 = ORIENTED_EDGE ( 'NONE', *, *, #360, .T. ) ;
 #226 = EDGE_CURVE ( 'NONE', #462, #163, #394, .T. ) ;
 #227 = PLANE ( 'NONE',  #72 ) ;
 #228 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #229 = AXIS2_PLACEMENT_3D ( 'NONE', #266, #272, #205 ) ;
 #230 = PLANE ( 'NONE',  #110 ) ;
 #231 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #232 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #233 = ORIENTED_EDGE ( 'NONE', *, *, #196, .F. ) ;
 #234 = EDGE_CURVE ( 'NONE', #276, #315, #388, .T. ) ;
 #235 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #236 = MANIFOLD_SOLID_BREP ( 'Stock-Treillage_Base-1', #148 ) ;
 #237 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #238 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #239 = EDGE_CURVE ( 'NONE', #58, #421, #372, .T. ) ;
 #240 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ;
 #241 = ADVANCED_FACE ( 'NONE', ( #383 ), #19, .F. ) ;
 #242 = EDGE_CURVE ( 'NONE', #278, #447, #365, .T. ) ;
 #243 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #244 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #245 = ORIENTED_EDGE ( 'NONE', *, *, #127, .T. ) ;
 #246 = ORIENTED_EDGE ( 'NONE', *, *, #134, .T. ) ;
 #247 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #248 = EDGE_CURVE ( 'NONE', #276, #348, #367, .T. ) ;
 #249 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #186 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #90, #87, #84 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
 #250 = EDGE_CURVE ( 'NONE', #278, #136, #363, .T. ) ;
 #251 = SURFACE_STYLE_USAGE ( .BOTH. , #34 ) ;
 #252 = ORIENTED_EDGE ( 'NONE', *, *, #234, .F. ) ;
 #253 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #3 ), #65 ) ;
 #254 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #255 = EDGE_CURVE ( 'NONE', #477, #407, #366, .T. ) ;
 #256 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #257 = PLANE ( 'NONE',  #48 ) ;
 #258 = EDGE_LOOP ( 'NONE', ( #420, #316, #120, #336 ) ) ;
 #259 = EDGE_LOOP ( 'NONE', ( #52, #135, #484, #465 ) ) ;
 #260 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #261 = EDGE_CURVE ( 'NONE', #405, #167, #362, .T. ) ;
 #262 = ADVANCED_FACE ( 'NONE', ( #361 ), #469, .F. ) ;
 #263 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #264 = AXIS2_PLACEMENT_3D ( 'NONE', #122, #118, #117 ) ;
 #265 = VERTEX_POINT ( 'NONE', #478 ) ;
 #266 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #267 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #268 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #47 ) ;
 #269 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #270 = ORIENTED_EDGE ( 'NONE', *, *, #255, .T. ) ;
 #271 = EDGE_CURVE ( 'NONE', #479, #136, #357, .T. ) ;
 #272 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #273 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #274 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #275 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #276 = VERTEX_POINT ( 'NONE', #398 ) ;
 #277 = EDGE_CURVE ( 'NONE', #136, #193, #354, .T. ) ;
 #278 = VERTEX_POINT ( 'NONE', #358 ) ;
 #279 =( CONVERSION_BASED_UNIT ( 'INCH', #377 ) LENGTH_UNIT ( ) NAMED_UNIT ( #202 ) );
 #280 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #281 = EDGE_LOOP ( 'NONE', ( #211, #286, #33, #199 ) ) ;
 #282 = EDGE_CURVE ( 'NONE', #477, #348, #352, .T. ) ;
 #283 = VERTEX_POINT ( 'NONE', #345 ) ;
 #284 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #285 = PLANE ( 'NONE',  #99 ) ;
 #286 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ;
 #287 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #288 = EDGE_CURVE ( 'NONE', #163, #58, #346, .T. ) ;
 #289 = VERTEX_POINT ( 'NONE', #335 ) ;
 #290 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #291 = EDGE_CURVE ( 'NONE', #405, #479, #342, .T. ) ;
 #292 = SHAPE_DEFINITION_REPRESENTATION ( #268, #158 ) ;
 #293 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #294 = ADVANCED_FACE ( 'NONE', ( #343 ), #333, .F. ) ;
 #295 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ;
 #296 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #297 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #298 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #299 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #49 );
 #300 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #301 = ORIENTED_EDGE ( 'NONE', *, *, #209, .T. ) ;
 #302 = ORIENTED_EDGE ( 'NONE', *, *, #226, .F. ) ;
 #303 = ORIENTED_EDGE ( 'NONE', *, *, #209, .F. ) ;
 #304 = EDGE_CURVE ( 'NONE', #447, #167, #356, .T. ) ;
 #305 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #306 = STYLED_ITEM ( 'NONE', ( #307 ), #158 ) ;
 #307 = PRESENTATION_STYLE_ASSIGNMENT (( #51 ) ) ;
 #308 = SURFACE_STYLE_FILL_AREA ( #55 ) ;
 #309 = VERTEX_POINT ( 'NONE', #275 ) ;
 #310 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #311 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #312 = COLOUR_RGB ( '',0.8980392156862745400, 0.9176470588235293700, 0.9294117647058823800 ) ;
 #313 = EDGE_CURVE ( 'NONE', #479, #447, #330, .T. ) ;
 #314 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
 #315 = VERTEX_POINT ( 'NONE', #267 ) ;
 #316 = ORIENTED_EDGE ( 'NONE', *, *, #226, .T. ) ;
 #317 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #318 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #83 );
 #319 = EDGE_CURVE ( 'NONE', #265, #407, #331, .T. ) ;
 #320 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #321 = VECTOR ( 'NONE', #154, 39.37007874015748100 ) ;
 #322 = VECTOR ( 'NONE', #181, 39.37007874015748100 ) ;
 #323 = CYLINDRICAL_SURFACE ( 'NONE', #229, 0.8000000000000000400 ) ;
 #324 = LINE ( 'NONE', #177, #321 ) ;
 #325 = EDGE_CURVE ( 'NONE', #289, #193, #339, .T. ) ;
 #326 = FACE_OUTER_BOUND ( 'NONE', #57, .T. ) ;
 #327 = CIRCLE ( 'NONE', #204, 0.5875000000000001300 ) ;
 #328 = FACE_OUTER_BOUND ( 'NONE', #130, .T. ) ;
 #329 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #330 = CIRCLE ( 'NONE', #121, 0.8999999999999999100 ) ;
 #331 = CIRCLE ( 'NONE', #101, 0.8000000000000000400 ) ;
 #332 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #306 ) ) ;
 #333 = CYLINDRICAL_SURFACE ( 'NONE', #140, 0.5875000000000001300 ) ;
 #334 = LINE ( 'NONE', #152, #322 ) ;
 #335 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #336 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ;
 #337 = ADVANCED_FACE ( 'NONE', ( #328 ), #323, .T. ) ;
 #338 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #339 = CIRCLE ( 'NONE', #162, 0.8000000000000000400 ) ;
 #340 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #341 = VECTOR ( 'NONE', #296, 39.37007874015748100 ) ;
 #342 = LINE ( 'NONE', #351, #341 ) ;
 #343 = FACE_OUTER_BOUND ( 'NONE', #281, .T. ) ;
 #344 = VECTOR ( 'NONE', #338, 39.37007874015748100 ) ;
 #345 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #346 = CIRCLE ( 'NONE', #60, 0.8000000000000000400 ) ;
 #347 = VECTOR ( 'NONE', #340, 39.37007874015748100 ) ;
 #348 = VERTEX_POINT ( 'NONE', #183 ) ;
 #349 = ORIENTED_EDGE ( 'NONE', *, *, #248, .T. ) ;
 #350 = EDGE_CURVE ( 'NONE', #123, #309, #327, .T. ) ;
 #351 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #352 = LINE ( 'NONE', #403, #344 ) ;
 #353 = VECTOR ( 'NONE', #391, 39.37007874015748100 ) ;
 #354 = LINE ( 'NONE', #387, #347 ) ;
 #355 = VECTOR ( 'NONE', #269, 39.37007874015748100 ) ;
 #356 = LINE ( 'NONE', #273, #355 ) ;
 #357 = LINE ( 'NONE', #408, #353 ) ;
 #358 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #359 = VECTOR ( 'NONE', #109, 39.37007874015748100 ) ;
 #360 = EDGE_CURVE ( 'NONE', #163, #22, #334, .T. ) ;
 #361 = FACE_OUTER_BOUND ( 'NONE', #476, .T. ) ;
 #362 = CIRCLE ( 'NONE', #11, 0.5875000000000001300 ) ;
 #363 = CIRCLE ( 'NONE', #481, 0.8999999999999999100 ) ;
 #364 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #365 = LINE ( 'NONE', #231, #389 ) ;
 #366 = LINE ( 'NONE', #132, #359 ) ;
 #367 = CIRCLE ( 'NONE', #482, 0.8999999999999999100 ) ;
 #368 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #369 = VECTOR ( 'NONE', #426, 39.37007874015748100 ) ;
 #370 = ORIENTED_EDGE ( 'NONE', *, *, #219, .F. ) ;
 #371 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #372 = LINE ( 'NONE', #368, #369 ) ;
 #373 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #374 = EDGE_CURVE ( 'NONE', #309, #167, #324, .T. ) ;
 #375 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #376 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #306 ), #411 ) ;
 #377 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #67 );
 #378 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #379 = ORIENTED_EDGE ( 'NONE', *, *, #187, .F. ) ;
 #380 = PLANE ( 'NONE',  #41 ) ;
 #381 = PRESENTATION_STYLE_ASSIGNMENT (( #251 ) ) ;
 #382 = COLOUR_RGB ( '',0.8980392156862745400, 0.9176470588235293700, 0.9294117647058823800 ) ;
 #383 = FACE_OUTER_BOUND ( 'NONE', #259, .T. ) ;
 #384 = VECTOR ( 'NONE', #364, 39.37007874015748100 ) ;
 #385 = SURFACE_STYLE_FILL_AREA ( #223 ) ;
 #386 = VECTOR ( 'NONE', #66, 39.37007874015748100 ) ;
 #387 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #388 = LINE ( 'NONE', #222, #384 ) ;
 #389 = VECTOR ( 'NONE', #166, 39.37007874015748100 ) ;
 #390 = VECTOR ( 'NONE', #95, 39.37007874015748100 ) ;
 #391 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #392 = CYLINDRICAL_SURFACE ( 'NONE', #10, 0.8000000000000000400 ) ;
 #393 = CIRCLE ( 'NONE', #15, 0.8999999999999999100 ) ;
 #394 = LINE ( 'NONE', #32, #386 ) ;
 #395 = CIRCLE ( 'NONE', #27, 0.8999999999999999100 ) ;
 #396 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #397 = ORIENTED_EDGE ( 'NONE', *, *, #153, .T. ) ;
 #398 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #399 = FACE_OUTER_BOUND ( 'NONE', #258, .T. ) ;
 #400 = VECTOR ( 'NONE', #185, 39.37007874015748100 ) ;
 #401 = LINE ( 'NONE', #25, #400 ) ;
 #402 = LINE ( 'NONE', #150, #406 ) ;
 #403 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #404 = LINE ( 'NONE', #157, #390 ) ;
 #405 = VERTEX_POINT ( 'NONE', #147 ) ;
 #406 = VECTOR ( 'NONE', #417, 39.37007874015748100 ) ;
 #407 = VERTEX_POINT ( 'NONE', #143 ) ;
 #408 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #409 = ORIENTED_EDGE ( 'NONE', *, *, #271, .F. ) ;
 #410 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #411 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #113 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #46, #24, #26 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
 #412 = VECTOR ( 'NONE', #198, 39.37007874015748100 ) ;
 #413 = CIRCLE ( 'NONE', #45, 0.8999999999999999100 ) ;
 #414 = LINE ( 'NONE', #16, #442 ) ;
 #415 = FACE_OUTER_BOUND ( 'NONE', #93, .T. ) ;
 #416 = LINE ( 'NONE', #448, #412 ) ;
 #417 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #418 = LINE ( 'NONE', #133, #429 ) ;
 #419 = CIRCLE ( 'NONE', #35, 0.8000000000000000400 ) ;
 #420 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ;
 #421 = VERTEX_POINT ( 'NONE', #151 ) ;
 #422 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #423 = FILL_AREA_STYLE_COLOUR ( '', #382 ) ;
 #424 = VECTOR ( 'NONE', #260, 39.37007874015748100 ) ;
 #425 = LINE ( 'NONE', #378, #424 ) ;
 #426 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #427 = FACE_OUTER_BOUND ( 'NONE', #70, .T. ) ;
 #428 = VECTOR ( 'NONE', #76, 39.37007874015748100 ) ;
 #429 = VECTOR ( 'NONE', #320, 39.37007874015748100 ) ;
 #430 = ORIENTED_EDGE ( 'NONE', *, *, #144, .F. ) ;
 #431 = VECTOR ( 'NONE', #6, 39.37007874015748100 ) ;
 #432 = ORIENTED_EDGE ( 'NONE', *, *, #160, .F. ) ;
 #433 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
 #434 = EDGE_LOOP ( 'NONE', ( #189, #379, #178, #370 ) ) ;
 #435 = FACE_OUTER_BOUND ( 'NONE', #97, .T. ) ;
 #436 = AXIS2_PLACEMENT_3D ( 'NONE', #371, #210, #194 ) ;
 #437 = ORIENTED_EDGE ( 'NONE', *, *, #174, .T. ) ;
 #438 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #439 = LINE ( 'NONE', #36, #428 ) ;
 #440 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #441 = CYLINDRICAL_SURFACE ( 'NONE', #54, 0.8999999999999999100 ) ;
 #442 = VECTOR ( 'NONE', #156, 39.37007874015748100 ) ;
 #443 = VECTOR ( 'NONE', #131, 39.37007874015748100 ) ;
 #444 = FACE_OUTER_BOUND ( 'NONE', #434, .T. ) ;
 #445 = LINE ( 'NONE', #235, #431 ) ;
 #446 = VECTOR ( 'NONE', #228, 39.37007874015748100 ) ;
 #447 = VERTEX_POINT ( 'NONE', #170 ) ;
 #448 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #449 = VECTOR ( 'NONE', #256, 39.37007874015748100 ) ;
 #450 = CYLINDRICAL_SURFACE ( 'NONE', #81, 0.8999999999999999100 ) ;
 #451 = LINE ( 'NONE', #165, #443 ) ;
 #452 = CYLINDRICAL_SURFACE ( 'NONE', #85, 0.8999999999999999100 ) ;
 #453 = FACE_OUTER_BOUND ( 'NONE', #182, .T. ) ;
 #454 = LINE ( 'NONE', #191, #446 ) ;
 #455 = ORIENTED_EDGE ( 'NONE', *, *, #271, .T. ) ;
 #456 = ADVANCED_FACE ( 'NONE', ( #326 ), #142, .T. ) ;
 #457 = FACE_OUTER_BOUND ( 'NONE', #471, .T. ) ;
 #458 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
 #459 = FACE_OUTER_BOUND ( 'NONE', #483, .T. ) ;
 #460 = ORIENTED_EDGE ( 'NONE', *, *, #180, .F. ) ;
 #461 = LINE ( 'NONE', #4, #449 ) ;
 #462 = VERTEX_POINT ( 'NONE', #141 ) ;
 #463 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #464 = FACE_OUTER_BOUND ( 'NONE', #13, .T. ) ;
 #465 = ORIENTED_EDGE ( 'NONE', *, *, #325, .T. ) ;
 #466 = ORIENTED_EDGE ( 'NONE', *, *, #196, .T. ) ;
 #467 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #468 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #469 = PLANE ( 'NONE',  #82 ) ;
 #470 = VERTEX_POINT ( 'NONE', #115 ) ;
 #471 = EDGE_LOOP ( 'NONE', ( #107, #56, #409, #155 ) ) ;
 #472 = ORIENTED_EDGE ( 'NONE', *, *, #187, .T. ) ;
 #473 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #474 = ORIENTED_EDGE ( 'NONE', *, *, #213, .T. ) ;
 #475 = VERTEX_POINT ( 'NONE', #111 ) ;
 #476 = EDGE_LOOP ( 'NONE', ( #203, #68, #217, #159 ) ) ;
 #477 = VERTEX_POINT ( 'NONE', #92 ) ;
 #478 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #479 = VERTEX_POINT ( 'NONE', #112 ) ;
 #480 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #481 = AXIS2_PLACEMENT_3D ( 'NONE', #238, #329, #138 ) ;
 #482 = AXIS2_PLACEMENT_3D ( 'NONE', #310, #28, #263 ) ;
 #483 = EDGE_LOOP ( 'NONE', ( #252, #349, #8, #303 ) ) ;
 #484 = ORIENTED_EDGE ( 'NONE', *, *, #213, .F. ) ;
 #485 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ;
 #486 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ;
 #487 = ORIENTED_EDGE ( 'NONE', *, *, #134, .F. ) ;
 ENDSEC;
 END-ISO-10303-21;
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_2.step
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Base_2.step
@ -0,0 +1,996 @@
 ISO-10303-21;
 HEADER;
 FILE_DESCRIPTION (( 'STEP AP214' ),
    '1' );
 FILE_NAME ('Trellais_Base_2.step',
    '2016-04-19T10:44:27',
    ( 'WarFairy' ),
    ( '' ),
    'SwSTEP 2.0',
    'SolidWorks 2015',
    '' );
 FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
 ENDSEC;
 DATA;
 #1 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
 #2 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #3 = EDGE_CURVE ( 'NONE', #611, #59, #673, .T. ) ;
 #4 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794776000, -1.505499999999999600 ) ) ;
 #5 = AXIS2_PLACEMENT_3D ( 'NONE', #161, #716, #220 ) ;
 #6 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #519 ) ;
 #7 = ORIENTED_EDGE ( 'NONE', *, *, #728, .T. ) ;
 #8 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #9 = EDGE_CURVE ( 'NONE', #791, #21, #670, .T. ) ;
 #10 = EDGE_CURVE ( 'NONE', #21, #779, #671, .T. ) ;
 #11 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #12 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #13 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #14 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #15 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #16 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #17 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #18 = CARTESIAN_POINT ( 'NONE',  ( 0.1906249999999999900, 0.8356249999999997300, -3.000000000000000400 ) ) ;
 #19 = EDGE_CURVE ( 'NONE', #747, #830, #677, .T. ) ;
 #20 = ORIENTED_EDGE ( 'NONE', *, *, #23, .F. ) ;
 #21 = VERTEX_POINT ( 'NONE', #215 ) ;
 #22 = EDGE_CURVE ( 'NONE', #208, #208, #661, .T. ) ;
 #23 = EDGE_CURVE ( 'NONE', #937, #944, #659, .T. ) ;
 #24 = ORIENTED_EDGE ( 'NONE', *, *, #23, .T. ) ;
 #25 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
 #26 = EDGE_CURVE ( 'NONE', #347, #208, #667, .T. ) ;
 #27 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #28 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #29 = VERTEX_POINT ( 'NONE', #245 ) ;
 #30 = EDGE_CURVE ( 'NONE', #756, #59, #654, .T. ) ;
 #31 = CARTESIAN_POINT ( 'NONE',  ( -0.08299456471625589500, 0.9043408528552404600, -1.361910545740200100 ) ) ;
 #32 = ORIENTED_EDGE ( 'NONE', *, *, #775, .F. ) ;
 #33 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #34 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000006700, 0.8903699539794773800, -1.000000000000000200 ) ) ;
 #35 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
 #36 = ADVANCED_FACE ( 'NONE', ( #653 ), #83, .F. ) ;
 #37 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #38 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #39 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #40 = EDGE_CURVE ( 'NONE', #142, #706, #644, .T. ) ;
 #41 = CARTESIAN_POINT ( 'NONE',  ( -5.463695987328526400E-016, 0.7373699539794775800, -1.505499999999999600 ) ) ;
 #42 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #43 = ADVANCED_FACE ( 'NONE', ( #650 ), #637, .T. ) ;
 #44 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #45 = EDGE_CURVE ( 'NONE', #208, #900, #639, .T. ) ;
 #46 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #47 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #48 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #49 = ORIENTED_EDGE ( 'NONE', *, *, #665, .T. ) ;
 #50 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #51 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
 #52 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
 #53 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #54 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
 #55 = AXIS2_PLACEMENT_3D ( 'NONE', #824, #563, #181 ) ;
 #56 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
 #57 = CARTESIAN_POINT ( 'NONE',  ( 0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ;
 #58 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794776000, -3.000000000000000400 ) ) ;
 #59 = VERTEX_POINT ( 'NONE', #734 ) ;
 #60 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #61 = EDGE_CURVE ( 'NONE', #753, #96, #636, .T. ) ;
 #62 = EDGE_CURVE ( 'NONE', #900, #851, #642, .T. ) ;
 #63 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #64 = EDGE_CURVE ( 'NONE', #874, #763, #628, .T. ) ;
 #65 = AXIS2_PLACEMENT_3D ( 'NONE', #210, #104, #618 ) ;
 #66 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #67 = VERTEX_POINT ( 'NONE', #231 ) ;
 #68 = ORIENTED_EDGE ( 'NONE', *, *, #842, .T. ) ;
 #69 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
 #70 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #71 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #72 = AXIS2_PLACEMENT_3D ( 'NONE', #57, #361, #291 ) ;
 #73 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
 #74 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #75 = EDGE_CURVE ( 'NONE', #851, #142, #622, .T. ) ;
 #76 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #77 = ORIENTED_EDGE ( 'NONE', *, *, #147, .F. ) ;
 #78 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #79 = ORIENTED_EDGE ( 'NONE', *, *, #597, .T. ) ;
 #80 = EDGE_CURVE ( 'NONE', #829, #386, #623, .T. ) ;
 #81 = EDGE_CURVE ( 'NONE', #347, #156, #615, .T. ) ;
 #82 = ORIENTED_EDGE ( 'NONE', *, *, #61, .T. ) ;
 #83 = PLANE ( 'NONE',  #551 ) ;
 #84 = STYLED_ITEM ( 'NONE', ( #481 ), #476 ) ;
 #85 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ;
 #86 = CARTESIAN_POINT ( 'NONE',  ( 0.08303899349228448200, 0.9043370025374136700, -1.361927527457784900 ) ) ;
 #87 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #88 = CARTESIAN_POINT ( 'NONE',  ( -0.1092859923199244000, 0.9009199821345862400, -1.380741065600105800 ) ) ;
 #89 = EDGE_CURVE ( 'NONE', #67, #386, #625, .T. ) ;
 #90 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #91 = PLANE ( 'NONE',  #784 ) ;
 #92 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #93 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #94 = ORIENTED_EDGE ( 'NONE', *, *, #934, .T. ) ;
 #95 = EDGE_CURVE ( 'NONE', #763, #944, #608, .T. ) ;
 #96 = VERTEX_POINT ( 'NONE', #815 ) ;
 #97 = ORIENTED_EDGE ( 'NONE', *, *, #252, .F. ) ;
 #98 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
 #99 = ADVANCED_FACE ( 'NONE', ( #612 ), #591, .T. ) ;
 #100 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #276 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #108, #621, #157 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
 #101 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999900, 0.8356249999999995100, -1.000000000000000200 ) ) ;
 #102 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.7373699539794775800, -1.497499999999998700 ) ) ;
 #103 = ADVANCED_FACE ( 'NONE', ( #605 ), #589, .F. ) ;
 #104 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #105 = AXIS2_PLACEMENT_3D ( 'NONE', #599, #867, #533 ) ;
 #106 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #107 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #108 =( CONVERSION_BASED_UNIT ( 'INCH', #298 ) LENGTH_UNIT ( ) NAMED_UNIT ( #51 ) );
 #109 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #110 = ORIENTED_EDGE ( 'NONE', *, *, #61, .F. ) ;
 #111 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
 #112 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #113 = EDGE_CURVE ( 'NONE', #660, #67, #590, .T. ) ;
 #114 = AXIS2_PLACEMENT_3D ( 'NONE', #112, #278, #894 ) ;
 #115 = VERTEX_POINT ( 'NONE', #289 ) ;
 #116 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #117 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ;
 #118 = EDGE_CURVE ( 'NONE', #386, #803, #601, .T. ) ;
 #119 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #120 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #121 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #122 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #123 = ORIENTED_EDGE ( 'NONE', *, *, #842, .F. ) ;
 #124 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794777100, -1.494531455293122400 ) ) ;
 #125 = AXIS2_PLACEMENT_3D ( 'NONE', #912, #559, #12 ) ;
 #126 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #127 = EDGE_CURVE ( 'NONE', #757, #195, #588, .T. ) ;
 #128 = ORIENTED_EDGE ( 'NONE', *, *, #869, .F. ) ;
 #129 = ORIENTED_EDGE ( 'NONE', *, *, #292, .T. ) ;
 #130 = ORIENTED_EDGE ( 'NONE', *, *, #597, .F. ) ;
 #131 = EDGE_CURVE ( 'NONE', #803, #660, #604, .T. ) ;
 #132 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #213, #349 ) ;
 #133 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #134 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999900, 0.8356249999999995100, -1.000000000000000200 ) ) ;
 #135 = AXIS2_PLACEMENT_3D ( 'NONE', #893, #886, #810 ) ;
 #136 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #137 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #528, 'distance_accuracy_value', 'NONE');
 #138 = CARTESIAN_POINT ( 'NONE',  ( 0.05356634221386298600, 0.9070503678270005500, -1.348538400958563700 ) ) ;
 #139 = EDGE_CURVE ( 'NONE', #691, #756, #583, .T. ) ;
 #140 = CARTESIAN_POINT ( 'NONE',  ( -0.1314786984691889100, 0.8972860744427430000, -1.404408607860570000 ) ) ;
 #141 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #142 = VERTEX_POINT ( 'NONE', #715 ) ;
 #143 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.5453699539794775200, -1.497499999999998700 ) ) ;
 #144 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #145 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #146 = ADVANCED_FACE ( 'NONE', ( #578 ), #627, .T. ) ;
 #147 = EDGE_CURVE ( 'NONE', #706, #156, #577, .T. ) ;
 #148 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #149 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #150 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999900, 0.8356249999999995100, -3.000000000000000400 ) ) ;
 #151 = ADVANCED_FACE ( 'NONE', ( #571 ), #568, .T. ) ;
 #152 = ORIENTED_EDGE ( 'NONE', *, *, #947, .F. ) ;
 #153 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #155 = CARTESIAN_POINT ( 'NONE',  ( 0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ;
 #156 = VERTEX_POINT ( 'NONE', #4 ) ;
 #157 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
 #158 = DIRECTION ( 'NONE',  ( 2.208330889770546000E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
 #159 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.0000000000000000000, -3.000000000000000400 ) ) ;
 #160 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #84 ) ) ;
 #161 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #162 = DIRECTION ( 'NONE',  ( -1.370950816492604200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #163 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ;
 #164 = ORIENTED_EDGE ( 'NONE', *, *, #728, .F. ) ;
 #165 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #166 = EDGE_CURVE ( 'NONE', #939, #829, #570, .T. ) ;
 #167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #168 = CARTESIAN_POINT ( 'NONE',  ( 0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
 #169 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #170 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #171 = EDGE_CURVE ( 'NONE', #29, #852, #581, .T. ) ;
 #172 = STYLED_ITEM ( 'NONE', ( #280 ), #191 ) ;
 #173 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #174 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #175 = VERTEX_POINT ( 'NONE', #808 ) ;
 #176 = PLANE ( 'NONE',  #125 ) ;
 #177 = AXIS2_PLACEMENT_3D ( 'NONE', #219, #87, #202 ) ;
 #178 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #179 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #180 = CARTESIAN_POINT ( 'NONE',  ( 0.1644204344883926900, 0.8906171820826315200, -1.483753186687025900 ) ) ;
 #181 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #182 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #183 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #184 = VERTEX_POINT ( 'NONE', #724 ) ;
 #185 = SURFACE_STYLE_USAGE ( .BOTH. , #228 ) ;
 #186 = EDGE_CURVE ( 'NONE', #142, #347, #562, .T. ) ;
 #187 = AXIS2_PLACEMENT_3D ( 'NONE', #804, #634, #162 ) ;
 #188 = AXIS2_PLACEMENT_3D ( 'NONE', #200, #196, #190 ) ;
 #189 = ORIENTED_EDGE ( 'NONE', *, *, #840, .T. ) ;
 #190 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #191 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Trellais_Base_2', ( #476, #462 ), #100 ) ;
 #192 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #193 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #84 ), #239 ) ;
 #194 = CARTESIAN_POINT ( 'NONE',  ( 0.02172755346967101100, 0.9086645110077499200, -1.341070851559779800 ) ) ;
 #195 = VERTEX_POINT ( 'NONE', #696 ) ;
 #196 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #197 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
 #198 = CARTESIAN_POINT ( 'NONE',  ( -0.1486664976559613200, 0.8939971990083345200, -1.431977152334762900 ) ) ;
 #199 = EDGE_CURVE ( 'NONE', #175, #96, #564, .T. ) ;
 #200 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.000000000000000400 ) ) ;
 #201 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
 #202 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #203 = ADVANCED_FACE ( 'NONE', ( #565 ), #549, .T. ) ;
 #204 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #205 = EDGE_CURVE ( 'NONE', #791, #184, #550, .T. ) ;
 #206 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #172 ) ) ;
 #207 = ORIENTED_EDGE ( 'NONE', *, *, #760, .F. ) ;
 #208 = VERTEX_POINT ( 'NONE', #424 ) ;
 #209 = ADVANCED_FACE ( 'NONE', ( #555 ), #539, .T. ) ;
 #210 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ;
 #211 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
 #212 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999998200, -5.244785863205042700E-017, -1.000000000000000200 ) ) ;
 #213 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #214 = AXIS2_PLACEMENT_3D ( 'NONE', #259, #222, #165 ) ;
 #215 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #216 = PLANE ( 'NONE',  #928 ) ;
 #217 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #272 ) ;
 #218 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #219 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ;
 #220 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #221 = ORIENTED_EDGE ( 'NONE', *, *, #541, .T. ) ;
 #222 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #223 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #224 = EDGE_CURVE ( 'NONE', #952, #756, #545, .T. ) ;
 #225 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #226 = AXIS2_PLACEMENT_3D ( 'NONE', #635, #167, #726 ) ;
 #227 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #228 = SURFACE_SIDE_STYLE ('',( #473 ) ) ;
 #229 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000009500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
 #230 = AXIS2_PLACEMENT_3D ( 'NONE', #148, #145, #141 ) ;
 #231 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #232 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #233 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #234 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #235 = CARTESIAN_POINT ( 'NONE',  ( -0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ;
 #236 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #237 = CARTESIAN_POINT ( 'NONE',  ( 0.1569997460273125400, 0.8922583492056802600, -1.452031913512531700 ) ) ;
 #238 = ORIENTED_EDGE ( 'NONE', *, *, #205, .T. ) ;
 #239 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #406 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #729, #387, #1 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
 #240 = EDGE_CURVE ( 'NONE', #29, #96, #548, .T. ) ;
 #241 = EDGE_LOOP ( 'NONE', ( #683, #872, #882, #938 ) ) ;
 #242 = ORIENTED_EDGE ( 'NONE', *, *, #312, .F. ) ;
 #243 = ORIENTED_EDGE ( 'NONE', *, *, #484, .F. ) ;
 #244 = EDGE_CURVE ( 'NONE', #29, #841, #579, .T. ) ;
 #245 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #246 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #172 ), #293 ) ;
 #247 = CARTESIAN_POINT ( 'NONE',  ( 0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #248 = AXIS2_PLACEMENT_3D ( 'NONE', #452, #456, #717 ) ;
 #249 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #250 = ORIENTED_EDGE ( 'NONE', *, *, #224, .T. ) ;
 #251 = CARTESIAN_POINT ( 'NONE',  ( -0.01068973362340016800, 0.9089055585831014000, -1.339990935699883800 ) ) ;
 #252 = EDGE_CURVE ( 'NONE', #747, #936, #537, .T. ) ;
 #253 = CARTESIAN_POINT ( 'NONE',  ( -0.1601231443816663600, 0.8915719896986321600, -1.462272985395308700 ) ) ;
 #254 = AXIS2_PLACEMENT_3D ( 'NONE', #223, #2, #897 ) ;
 #255 = ORIENTED_EDGE ( 'NONE', *, *, #292, .F. ) ;
 #256 = ADVANCED_FACE ( 'NONE', ( #532, #529 ), #520, .T. ) ;
 #257 = ORIENTED_EDGE ( 'NONE', *, *, #22, .T. ) ;
 #258 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
 #259 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #260 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #261 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #262 = AXIS2_PLACEMENT_3D ( 'NONE', #102, #98, #92 ) ;
 #263 = ADVANCED_FACE ( 'NONE', ( #524 ), #664, .T. ) ;
 #264 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #265 = PLANE ( 'NONE',  #65 ) ;
 #266 = CARTESIAN_POINT ( 'NONE',  ( -0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
 #267 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
 #268 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #54 );
 #269 = DIRECTION ( 'NONE',  ( 2.208330889770546000E-016, -1.000000000000000000, 0.0000000000000000000 ) ) ;
 #270 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 2.208330889770546000E-016, 0.0000000000000000000 ) ) ;
 #271 = ORIENTED_EDGE ( 'NONE', *, *, #371, .T. ) ;
 #272 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
 #273 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #274 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
 #275 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #276 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #108, 'distance_accuracy_value', 'NONE');
 #277 = AXIS2_PLACEMENT_3D ( 'NONE', #204, #783, #260 ) ;
 #278 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #279 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #280 = PRESENTATION_STYLE_ASSIGNMENT (( #451 ) ) ;
 #281 = PLANE ( 'NONE',  #254 ) ;
 #282 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
 #283 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #284 = EDGE_CURVE ( 'NONE', #839, #175, #522, .T. ) ;
 #285 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #274, 'design' ) ;
 #286 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #287 = ORIENTED_EDGE ( 'NONE', *, *, #224, .F. ) ;
 #288 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #289 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007000, 0.8903699539794772700, -1.505499999999999600 ) ) ;
 #290 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #291 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #292 = EDGE_CURVE ( 'NONE', #573, #184, #521, .T. ) ;
 #293 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #137 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #528, #111, #626 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
 #294 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #295 = CARTESIAN_POINT ( 'NONE',  ( 0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
 #296 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -1.505499999999999600 ) ) ;
 #297 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #298 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #969 );
 #299 = ORIENTED_EDGE ( 'NONE', *, *, #371, .F. ) ;
 #300 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #301 = AXIS2_PLACEMENT_3D ( 'NONE', #39, #28, #27 ) ;
 #302 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #303 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #304 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #305 = CARTESIAN_POINT ( 'NONE',  ( 0.1436005536913934900, 0.8950191934951699000, -1.422519181586778800 ) ) ;
 #306 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #307 = FILL_AREA_STYLE ('',( #469 ) ) ;
 #308 = CYLINDRICAL_SURFACE ( 'NONE', #132, 0.5875000000000001300 ) ;
 #309 = SHAPE_DEFINITION_REPRESENTATION ( #6, #191 ) ;
 #310 = FACE_OUTER_BOUND ( 'NONE', #949, .T. ) ;
 #311 = ORIENTED_EDGE ( 'NONE', *, *, #341, .T. ) ;
 #312 = EDGE_CURVE ( 'NONE', #747, #757, #518, .T. ) ;
 #313 = AXIS2_PLACEMENT_3D ( 'NONE', #116, #641, #170 ) ;
 #314 = SURFACE_STYLE_FILL_AREA ( #357 ) ;
 #315 = LINE ( 'NONE', #798, #321 ) ;
 #316 = AXIS2_PLACEMENT_3D ( 'NONE', #41, #35, #33 ) ;
 #317 = CIRCLE ( 'NONE', #845, 0.8999999999999999100 ) ;
 #318 = FACE_OUTER_BOUND ( 'NONE', #680, .T. ) ;
 #319 = CARTESIAN_POINT ( 'NONE',  ( 0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ;
 #320 = VERTEX_POINT ( 'NONE', #525 ) ;
 #321 = VECTOR ( 'NONE', #269, 39.37007874015748100 ) ;
 #322 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #323 = VECTOR ( 'NONE', #44, 39.37007874015748100 ) ;
 #324 = VECTOR ( 'NONE', #261, 39.37007874015748100 ) ;
 #325 = LINE ( 'NONE', #511, #324 ) ;
 #326 = LINE ( 'NONE', #873, #328 ) ;
 #327 = AXIS2_PLACEMENT_3D ( 'NONE', #789, #264, #875 ) ;
 #328 = VECTOR ( 'NONE', #343, 39.37007874015748100 ) ;
 #329 = VECTOR ( 'NONE', #866, 39.37007874015748100 ) ;
 #330 = CARTESIAN_POINT ( 'NONE',  ( -0.04294414358913817300, 0.9077458242970448700, -1.345301919354580100 ) ) ;
 #331 = FACE_OUTER_BOUND ( 'NONE', #762, .T. ) ;
 #332 = ORIENTED_EDGE ( 'NONE', *, *, #312, .T. ) ;
 #333 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007600, 0.8903699539794776000, -1.494531313619976700 ) ) ;
 #334 = EDGE_CURVE ( 'NONE', #936, #863, #513, .T. ) ;
 #335 = ADVANCED_FACE ( 'NONE', ( #514 ), #497, .F. ) ;
 #336 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #337 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #338 = LINE ( 'NONE', #606, #329 ) ;
 #339 = LINE ( 'NONE', #959, #323 ) ;
 #340 = ADVANCED_FACE ( 'NONE', ( #503 ), #494, .F. ) ;
 #341 = EDGE_CURVE ( 'NONE', #573, #691, #502, .T. ) ;
 #342 = VECTOR ( 'NONE', #393, 39.37007874015748100 ) ;
 #343 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #344 = LINE ( 'NONE', #746, #342 ) ;
 #345 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #346 = LINE ( 'NONE', #34, #350 ) ;
 #347 = VERTEX_POINT ( 'NONE', #917 ) ;
 #348 = CIRCLE ( 'NONE', #431, 0.5875000000000001300 ) ;
 #349 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #350 = VECTOR ( 'NONE', #598, 39.37007874015748100 ) ;
 #351 = ADVANCED_FACE ( 'NONE', ( #499 ), #490, .F. ) ;
 #352 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #353 = ORIENTED_EDGE ( 'NONE', *, *, #186, .T. ) ;
 #354 = AXIS2_PLACEMENT_3D ( 'NONE', #275, #364, #337 ) ;
 #355 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #356 = VECTOR ( 'NONE', #825, 39.37007874015748100 ) ;
 #357 = FILL_AREA_STYLE ('',( #885 ) ) ;
 #358 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
 ( #561, #124, #180, #749, #237, #834, #305, #923, #400, #458, #495, #86, #592, #138, #686, #194, #773, #251, #860, #330, #945, #425, #31, #501, #88, #596, #140, #689, #198, #778, #253, #862, #333, #951 ),
 .UNSPECIFIED., .F., .F.,
 ( 4, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 4 ),
 ( 0.0000000000000000000, 0.0008237336438414783900, 0.001647467287682956800, 0.002471200931524435100, 0.003294934575365913600, 0.004118668219207391600, 0.004942401863048870100, 0.005766135506890348600, 0.006589869150731827100, 0.007413602794573305600, 0.008237336438414783300, 0.009061070082256261800, 0.009884803726097740300, 0.01070853736993921900, 0.01153227101378069700, 0.01235600465762217600, 0.01317973830146365400 ),
 .UNSPECIFIED. ) ;
 #359 = VECTOR ( 'NONE', #297, 39.37007874015748100 ) ;
 #360 = CYLINDRICAL_SURFACE ( 'NONE', #542, 0.8000000000000000400 ) ;
 #361 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #362 = LINE ( 'NONE', #378, #359 ) ;
 #363 = LINE ( 'NONE', #233, #356 ) ;
 #364 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #365 = FACE_OUTER_BOUND ( 'NONE', #766, .T. ) ;
 #366 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ;
 #367 = FACE_OUTER_BOUND ( 'NONE', #770, .T. ) ;
 #368 = ORIENTED_EDGE ( 'NONE', *, *, #139, .T. ) ;
 #369 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794776000, -1.000000000000000200 ) ) ;
 #370 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999600, 0.6809919235938120000, -1.000000000000000200 ) ) ;
 #371 = EDGE_CURVE ( 'NONE', #573, #952, #496, .T. ) ;
 #372 = AXIS2_PLACEMENT_3D ( 'NONE', #735, #232, #821 ) ;
 #373 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000009500, 0.8903699539794776000, -3.000000000000000400 ) ) ;
 #374 = VECTOR ( 'NONE', #909, 39.37007874015748100 ) ;
 #375 = FACE_OUTER_BOUND ( 'NONE', #765, .T. ) ;
 #376 = LINE ( 'NONE', #8, #374 ) ;
 #377 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #378 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #379 = VECTOR ( 'NONE', #290, 39.37007874015748100 ) ;
 #380 = CIRCLE ( 'NONE', #313, 0.7482017767938234900 ) ;
 #381 = AXIS2_PLACEMENT_3D ( 'NONE', #18, #192, #90 ) ;
 #382 = VECTOR ( 'NONE', #227, 39.37007874015748100 ) ;
 #383 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #385 = LINE ( 'NONE', #720, #382 ) ;
 #384 = CARTESIAN_POINT ( 'NONE',  ( -0.3419776119402986300, 0.4777107523717784600, -3.000000000000000400 ) ) ;
 #386 = VERTEX_POINT ( 'NONE', #474 ) ;
 #387 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
 #388 = ORIENTED_EDGE ( 'NONE', *, *, #30, .F. ) ;
 #389 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #390 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #391 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #392 = CIRCLE ( 'NONE', #372, 0.2500000000000001100 ) ;
 #393 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #394 = LINE ( 'NONE', #229, #379 ) ;
 #395 = CIRCLE ( 'NONE', #226, 0.2500000000000001100 ) ;
 #396 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #397 = FACE_OUTER_BOUND ( 'NONE', #777, .T. ) ;
 #398 = LINE ( 'NONE', #366, #403 ) ;
 #399 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #400 = CARTESIAN_POINT ( 'NONE',  ( 0.1246321506638823400, 0.8984903836471271900, -1.396079798429413300 ) ) ;
 #401 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #402 = FACE_OUTER_BOUND ( 'NONE', #879, .T. ) ;
 #403 = VECTOR ( 'NONE', #889, 39.37007874015748100 ) ;
 #404 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #405 = ORIENTED_EDGE ( 'NONE', *, *, #139, .F. ) ;
 #406 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #729, 'distance_accuracy_value', 'NONE');
 #407 = EDGE_CURVE ( 'NONE', #852, #175, #491, .T. ) ;
 #408 = FACE_OUTER_BOUND ( 'NONE', #241, .T. ) ;
 #409 = CIRCLE ( 'NONE', #5, 0.7482017767938234900 ) ;
 #410 = VECTOR ( 'NONE', #158, 39.37007874015748100 ) ;
 #411 = LINE ( 'NONE', #449, #410 ) ;
 #412 = LINE ( 'NONE', #109, #418 ) ;
 #413 = FACE_OUTER_BOUND ( 'NONE', #871, .T. ) ;
 #414 = EDGE_CURVE ( 'NONE', #691, #611, #489, .T. ) ;
 #415 = CYLINDRICAL_SURFACE ( 'NONE', #861, 0.8000000000000000400 ) ;
 #416 = CLOSED_SHELL ( 'NONE', ( #440, #955, #870, #256, #796, #876, #701, #785, #693, #263, #600, #516, #436, #705, #203, #103, #613, #151, #335, #43, #146, #340, #209, #510, #351, #99, #36, #960 ) ) ;
 #417 = CIRCLE ( 'NONE', #755, 0.1574999999999998900 ) ;
 #418 = VECTOR ( 'NONE', #712, 39.37007874015748100 ) ;
 #419 = VECTOR ( 'NONE', #355, 39.37007874015748100 ) ;
 #420 = FACE_OUTER_BOUND ( 'NONE', #854, .T. ) ;
 #421 = VECTOR ( 'NONE', #617, 39.37007874015748100 ) ;
 #422 = LINE ( 'NONE', #962, #421 ) ;
 #423 = CIRCLE ( 'NONE', #633, 0.04687500000000001400 ) ;
 #424 = CARTESIAN_POINT ( 'NONE',  ( -2.421206997196959000E-014, 0.7373699539794775800, -1.339999999999999400 ) ) ;
 #425 = CARTESIAN_POINT ( 'NONE',  ( -0.07335619563912319800, 0.9053669957282992600, -1.356747874808138700 ) ) ;
 #426 = LINE ( 'NONE', #970, #419 ) ;
 #427 = EDGE_CURVE ( 'NONE', #67, #939, #488, .T. ) ;
 #428 = CYLINDRICAL_SURFACE ( 'NONE', #455, 0.8999999999999999100 ) ;
 #429 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #430 = CIRCLE ( 'NONE', #687, 0.5875000000000001300 ) ;
 #431 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #828, #303 ) ;
 #432 = CIRCLE ( 'NONE', #327, 0.7482017767938234900 ) ;
 #433 = CIRCLE ( 'NONE', #569, 0.2500000000000002200 ) ;
 #434 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #435 = FACE_OUTER_BOUND ( 'NONE', #932, .T. ) ;
 #436 = ADVANCED_FACE ( 'NONE', ( #482 ), #730, .T. ) ;
 #437 = VECTOR ( 'NONE', #37, 39.37007874015748100 ) ;
 #438 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #439 = CARTESIAN_POINT ( 'NONE',  ( 0.4875000000000000400, 0.6809919235938120000, -3.000000000000000400 ) ) ;
 #440 = ADVANCED_FACE ( 'NONE', ( #483 ), #176, .F. ) ;
 #441 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #442 = CARTESIAN_POINT ( 'NONE',  ( 0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ;
 #443 = FACE_OUTER_BOUND ( 'NONE', #774, .T. ) ;
 #444 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #445 = VECTOR ( 'NONE', #336, 39.37007874015748100 ) ;
 #446 = LINE ( 'NONE', #655, #445 ) ;
 #447 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #448 = LINE ( 'NONE', #953, #437 ) ;
 #449 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999998200, -5.244785863205042700E-017, -1.000000000000000200 ) ) ;
 #450 = CIRCLE ( 'NONE', #277, 0.8000000000000000400 ) ;
 #451 = SURFACE_STYLE_USAGE ( .BOTH. , #972 ) ;
 #452 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #453 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.5453699539794775200, -1.497499999999998700 ) ) ;
 #454 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #455 = AXIS2_PLACEMENT_3D ( 'NONE', #602, #429, #699 ) ;
 #456 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #457 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999600, 0.6809919235938120000, -3.000000000000000400 ) ) ;
 #458 = CARTESIAN_POINT ( 'NONE',  ( 0.1094200760253842400, 0.9008993506511299200, -1.380867739114418200 ) ) ;
 #459 = EDGE_CURVE ( 'NONE', #839, #863, #480, .T. ) ;
 #460 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ;
 #461 = CARTESIAN_POINT ( 'NONE',  ( 0.3419776119402984600, 0.4777107523717784600, -3.000000000000000400 ) ) ;
 #462 = AXIS2_PLACEMENT_3D ( 'NONE', #447, #714, #218 ) ;
 #463 = CARTESIAN_POINT ( 'NONE',  ( -0.1906249999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
 #464 = CARTESIAN_POINT ( 'NONE',  ( -5.463695987328526400E-016, 0.7373699539794775800, -1.505499999999999600 ) ) ;
 #465 = LENGTH_MEASURE_WITH_UNIT ( LENGTH_MEASURE( 0.02539999999999999900 ), #197 );
 #466 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #467 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #468 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.5453699539794775200, -1.497499999999998700 ) ) ;
 #469 = FILL_AREA_STYLE_COLOUR ( '', #486 ) ;
 #470 = AXIS2_PLACEMENT_3D ( 'NONE', #468, #306, #126 ) ;
 #471 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #473 = SURFACE_STYLE_FILL_AREA ( #307 ) ;
 #472 = CARTESIAN_POINT ( 'NONE',  ( -0.3419776119402986300, 0.4777107523717784600, -1.000000000000000200 ) ) ;
 #474 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #475 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #476 = MANIFOLD_SOLID_BREP ( 'Stock-Treillage_Base-1', #416 ) ;
 #477 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #478 = EDGE_CURVE ( 'NONE', #927, #841, #446, .T. ) ;
 #479 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #480 = LINE ( 'NONE', #122, #493 ) ;
 #481 = PRESENTATION_STYLE_ASSIGNMENT (( #185 ) ) ;
 #482 = FACE_OUTER_BOUND ( 'NONE', #681, .T. ) ;
 #483 = FACE_OUTER_BOUND ( 'NONE', #891, .T. ) ;
 #484 = EDGE_CURVE ( 'NONE', #184, #779, #448, .T. ) ;
 #485 = VECTOR ( 'NONE', #396, 39.37007874015748100 ) ;
 #486 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
 #487 = AXIS2_PLACEMENT_3D ( 'NONE', #740, #651, #648 ) ;
 #488 = LINE ( 'NONE', #925, #485 ) ;
 #489 = CIRCLE ( 'NONE', #657, 0.04687499999999999300 ) ;
 #490 = CYLINDRICAL_SURFACE ( 'NONE', #887, 0.7482017767938234900 ) ;
 #491 = CIRCLE ( 'NONE', #711, 0.8000000000000000400 ) ;
 #492 = VECTOR ( 'NONE', #133, 39.37007874015748100 ) ;
 #493 = VECTOR ( 'NONE', #300, 39.37007874015748100 ) ;
 #494 = CYLINDRICAL_SURFACE ( 'NONE', #831, 0.04687500000000001400 ) ;
 #495 = CARTESIAN_POINT ( 'NONE',  ( 0.1011131468003748600, 0.9020957037658874400, -1.374028859226739100 ) ) ;
 #496 = LINE ( 'NONE', #743, #492 ) ;
 #497 = CYLINDRICAL_SURFACE ( 'NONE', #768, 0.5875000000000001300 ) ;
 #498 = AXIS2_PLACEMENT_3D ( 'NONE', #93, #42, #512 ) ;
 #499 = FACE_OUTER_BOUND ( 'NONE', #935, .T. ) ;
 #500 = VECTOR ( 'NONE', #479, 39.37007874015748100 ) ;
 #501 = CARTESIAN_POINT ( 'NONE',  ( -0.1008883795968710400, 0.9021252105212961300, -1.373865794683199400 ) ) ;
 #502 = LINE ( 'NONE', #17, #500 ) ;
 #503 = FACE_OUTER_BOUND ( 'NONE', #929, .T. ) ;
 #504 = VECTOR ( 'NONE', #78, 39.37007874015748100 ) ;
 #505 = ORIENTED_EDGE ( 'NONE', *, *, #3, .T. ) ;
 #506 = CARTESIAN_POINT ( 'NONE',  ( -0.2033659178868795500, 0.8807352497931432200, -1.000000000000000200 ) ) ;
 #507 = ORIENTED_EDGE ( 'NONE', *, *, #685, .T. ) ;
 #508 = EDGE_CURVE ( 'NONE', #822, #839, #450, .T. ) ;
 #509 = ORIENTED_EDGE ( 'NONE', *, *, #3, .F. ) ;
 #510 = ADVANCED_FACE ( 'NONE', ( #435 ), #428, .T. ) ;
 #511 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #512 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #513 = CIRCLE ( 'NONE', #585, 0.8999999999999999100 ) ;
 #514 = FACE_OUTER_BOUND ( 'NONE', #832, .T. ) ;
 #515 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #516 = ADVANCED_FACE ( 'NONE', ( #443 ), #958, .F. ) ;
 #517 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #518 = LINE ( 'NONE', #183, #504 ) ;
 #519 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #582, #285 ) ;
 #520 = CYLINDRICAL_SURFACE ( 'NONE', #470, 0.1574999999999998900 ) ;
 #521 = CIRCLE ( 'NONE', #72, 0.2500000000000002200 ) ;
 #522 = LINE ( 'NONE', #401, #538 ) ;
 #523 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #524 = FACE_OUTER_BOUND ( 'NONE', #843, .T. ) ;
 #525 = CARTESIAN_POINT ( 'NONE',  ( -1.690330946079762900E-015, 0.5453699539794775200, -1.654999999999998700 ) ) ;
 #526 = AXIS2_PLACEMENT_3D ( 'NONE', #924, #566, #477 ) ;
 #527 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.8356249999999997300, -1.000000000000000200 ) ) ;
 #528 =( CONVERSION_BASED_UNIT ( 'INCH', #268 ) LENGTH_UNIT ( ) NAMED_UNIT ( #880 ) );
 #529 = FACE_OUTER_BOUND ( 'NONE', #725, .T. ) ;
 #530 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #531 = VECTOR ( 'NONE', #666, 39.37007874015748100 ) ;
 #532 = FACE_OUTER_BOUND ( 'NONE', #700, .T. ) ;
 #533 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #534 = EDGE_CURVE ( 'NONE', #611, #874, #432, .T. ) ;
 #535 = VECTOR ( 'NONE', #60, 39.37007874015748100 ) ;
 #536 = PLANE ( 'NONE',  #187 ) ;
 #537 = LINE ( 'NONE', #144, #531 ) ;
 #538 = VECTOR ( 'NONE', #574, 39.37007874015748100 ) ;
 #539 = CYLINDRICAL_SURFACE ( 'NONE', #354, 0.8999999999999999100 ) ;
 #540 = ORIENTED_EDGE ( 'NONE', *, *, #113, .F. ) ;
 #541 = EDGE_CURVE ( 'NONE', #952, #779, #433, .T. ) ;
 #542 = AXIS2_PLACEMENT_3D ( 'NONE', #173, #544, #547 ) ;
 #543 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ;
 #544 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #545 = LINE ( 'NONE', #159, #552 ) ;
 #546 = CARTESIAN_POINT ( 'NONE',  ( -0.1906249999999999900, 0.8356249999999997300, -3.000000000000000400 ) ) ;
 #547 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #548 = CIRCLE ( 'NONE', #301, 0.8999999999999999100 ) ;
 #549 = CYLINDRICAL_SURFACE ( 'NONE', #248, 0.8999999999999999100 ) ;
 #550 = CIRCLE ( 'NONE', #214, 0.5875000000000001300 ) ;
 #551 = AXIS2_PLACEMENT_3D ( 'NONE', #25, #966, #619 ) ;
 #552 = VECTOR ( 'NONE', #273, 39.37007874015748100 ) ;
 #553 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #554 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
 #555 = FACE_OUTER_BOUND ( 'NONE', #918, .T. ) ;
 #556 = VECTOR ( 'NONE', #895, 39.37007874015748100 ) ;
 #557 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #558 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000009500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
 #559 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #560 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #561 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.8903699539794776000, -1.505499999999999600 ) ) ;
 #562 = LINE ( 'NONE', #782, #556 ) ;
 #563 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #564 = LINE ( 'NONE', #607, #576 ) ;
 #565 = FACE_OUTER_BOUND ( 'NONE', #807, .T. ) ;
 #566 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #567 = VECTOR ( 'NONE', #942, 39.37007874015748100 ) ;
 #568 = CYLINDRICAL_SURFACE ( 'NONE', #177, 0.2500000000000000600 ) ;
 #569 = AXIS2_PLACEMENT_3D ( 'NONE', #439, #47, #517 ) ;
 #570 = CIRCLE ( 'NONE', #135, 0.8000000000000000400 ) ;
 #571 = FACE_OUTER_BOUND ( 'NONE', #788, .T. ) ;
 #572 = ORIENTED_EDGE ( 'NONE', *, *, #252, .T. ) ;
 #573 = VERTEX_POINT ( 'NONE', #609 ) ;
 #574 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #575 = EDGE_CURVE ( 'NONE', #863, #830, #422, .T. ) ;
 #576 = VECTOR ( 'NONE', #454, 39.37007874015748100 ) ;
 #577 = LINE ( 'NONE', #369, #587 ) ;
 #578 = FACE_OUTER_BOUND ( 'NONE', #898, .T. ) ;
 #579 = LINE ( 'NONE', #225, #535 ) ;
 #580 = VECTOR ( 'NONE', #174, 39.37007874015748100 ) ;
 #581 = LINE ( 'NONE', #279, #567 ) ;
 #582 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #674, .NOT_KNOWN. ) ;
 #583 = LINE ( 'NONE', #69, #580 ) ;
 #584 = ORIENTED_EDGE ( 'NONE', *, *, #19, .F. ) ;
 #585 = AXIS2_PLACEMENT_3D ( 'NONE', #713, #48, #46 ) ;
 #586 = VECTOR ( 'NONE', #169, 39.37007874015748100 ) ;
 #587 = VECTOR ( 'NONE', #283, 39.37007874015748100 ) ;
 #588 = CIRCLE ( 'NONE', #794, 0.8000000000000000400 ) ;
 #589 = CYLINDRICAL_SURFACE ( 'NONE', #965, 0.04687499999999999300 ) ;
 #590 = LINE ( 'NONE', #377, #594 ) ;
 #591 = CYLINDRICAL_SURFACE ( 'NONE', #913, 0.1655000000000001700 ) ;
 #592 = CARTESIAN_POINT ( 'NONE',  ( 0.07346159783481195900, 0.9053553647116803200, -1.356806724310162900 ) ) ;
 #593 = EDGE_CURVE ( 'NONE', #874, #937, #423, .T. ) ;
 #594 = VECTOR ( 'NONE', #383, 39.37007874015748100 ) ;
 #595 = ORIENTED_EDGE ( 'NONE', *, *, #334, .T. ) ;
 #596 = CARTESIAN_POINT ( 'NONE',  ( -0.1246537087686272600, 0.8984875672001423300, -1.396094000529339900 ) ) ;
 #597 = EDGE_CURVE ( 'NONE', #790, #848, #430, .T. ) ;
 #598 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #599 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #600 = ADVANCED_FACE ( 'NONE', ( #420 ), #415, .T. ) ;
 #601 = LINE ( 'NONE', #304, #586 ) ;
 #602 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #603 = AXIS2_PLACEMENT_3D ( 'NONE', #464, #554, #119 ) ;
 #604 = CIRCLE ( 'NONE', #850, 0.8999999999999999100 ) ;
 #605 = FACE_OUTER_BOUND ( 'NONE', #890, .T. ) ;
 #606 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #607 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #608 = CIRCLE ( 'NONE', #738, 0.04687500000000001400 ) ;
 #609 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.6809919235938120000, -1.000000000000000200 ) ) ;
 #610 = VECTOR ( 'NONE', #14, 39.37007874015748100 ) ;
 #611 = VERTEX_POINT ( 'NONE', #155 ) ;
 #612 = FACE_OUTER_BOUND ( 'NONE', #884, .T. ) ;
 #613 = ADVANCED_FACE ( 'NONE', ( #413 ), #216, .T. ) ;
 #614 = ORIENTED_EDGE ( 'NONE', *, *, #685, .F. ) ;
 #615 = LINE ( 'NONE', #296, #610 ) ;
 #616 = AXIS2_PLACEMENT_3D ( 'NONE', #745, #732, #663 ) ;
 #617 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #618 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #619 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #620 = VECTOR ( 'NONE', #121, 39.37007874015748100 ) ;
 #621 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
 #622 = LINE ( 'NONE', #558, #620 ) ;
 #623 = LINE ( 'NONE', #178, #643 ) ;
 #624 = VECTOR ( 'NONE', #302, 39.37007874015748100 ) ;
 #625 = CIRCLE ( 'NONE', #487, 0.8999999999999999100 ) ;
 #626 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
 #627 = PLANE ( 'NONE',  #105 ) ;
 #628 = LINE ( 'NONE', #235, #624 ) ;
 #629 = PLANE ( 'NONE',  #114 ) ;
 #630 = VECTOR ( 'NONE', #553, 39.37007874015748100 ) ;
 #631 = ORIENTED_EDGE ( 'NONE', *, *, #414, .T. ) ;
 #632 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #633 = AXIS2_PLACEMENT_3D ( 'NONE', #266, #877, #352 ) ;
 #634 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.370950816492604200E-016 ) ) ;
 #635 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000000000400, 0.6809919235938120000, -1.000000000000000200 ) ) ;
 #636 = LINE ( 'NONE', #827, #630 ) ;
 #637 = CYLINDRICAL_SURFACE ( 'NONE', #676, 0.2500000000000001100 ) ;
 #638 = EDGE_CURVE ( 'NONE', #195, #830, #426, .T. ) ;
 #639 = CIRCLE ( 'NONE', #616, 0.1655000000000001700 ) ;
 #640 = CARTESIAN_POINT ( 'NONE',  ( -5.463695987328526400E-016, 1.060741146872564000, -1.505499999999999600 ) ) ;
 #641 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #642 = LINE ( 'NONE', #543, #646 ) ;
 #643 = VECTOR ( 'NONE', #294, 39.37007874015748100 ) ;
 #644 = LINE ( 'NONE', #211, #658 ) ;
 #645 = ORIENTED_EDGE ( 'NONE', *, *, #40, .F. ) ;
 #646 = VECTOR ( 'NONE', #833, 39.37007874015748100 ) ;
 #647 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #674 ) ) ;
 #648 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #649 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #650 = FACE_OUTER_BOUND ( 'NONE', #919, .T. ) ;
 #651 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #652 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #653 = FACE_OUTER_BOUND ( 'NONE', #954, .T. ) ;
 #654 = CIRCLE ( 'NONE', #381, 0.04687499999999999300 ) ;
 #655 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #656 = VECTOR ( 'NONE', #136, 39.37007874015748100 ) ;
 #657 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #812, #288 ) ;
 #658 = VECTOR ( 'NONE', #154, 39.37007874015748100 ) ;
 #659 = LINE ( 'NONE', #134, #656 ) ;
 #660 = VERTEX_POINT ( 'NONE', #53 ) ;
 #661 = CIRCLE ( 'NONE', #262, 0.1574999999999998900 ) ;
 #662 = ORIENTED_EDGE ( 'NONE', *, *, #697, .F. ) ;
 #663 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #664 = PLANE ( 'NONE',  #526 ) ;
 #665 = EDGE_CURVE ( 'NONE', #937, #739, #411, .T. ) ;
 #666 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #667 = CIRCLE ( 'NONE', #316, 0.1655000000000001700 ) ;
 #668 = VECTOR ( 'NONE', #249, 39.37007874015748100 ) ;
 #669 = EDGE_CURVE ( 'NONE', #757, #939, #412, .T. ) ;
 #670 = LINE ( 'NONE', #247, #668 ) ;
 #671 = CIRCLE ( 'NONE', #188, 0.5875000000000001300 ) ;
 #672 = VECTOR ( 'NONE', #322, 39.37007874015748100 ) ;
 #673 = LINE ( 'NONE', #319, #672 ) ;
 #674 = PRODUCT ( 'Trellais_Base_2', 'Trellais_Base_2', '', ( #802 ) ) ;
 #675 = ORIENTED_EDGE ( 'NONE', *, *, #760, .T. ) ;
 #676 = AXIS2_PLACEMENT_3D ( 'NONE', #442, #106, #515 ) ;
 #677 = CIRCLE ( 'NONE', #230, 0.8999999999999999100 ) ;
 #678 = ORIENTED_EDGE ( 'NONE', *, *, #40, .T. ) ;
 #679 = ORIENTED_EDGE ( 'NONE', *, *, #780, .T. ) ;
 #680 = EDGE_LOOP ( 'NONE', ( #776, #899, #792, #460, #849, #915, #97, #332, #744, #694, #540, #692 ) ) ;
 #681 = EDGE_LOOP ( 'NONE', ( #242, #737, #721, #857 ) ) ;
 #682 = EDGE_CURVE ( 'NONE', #320, #320, #417, .T. ) ;
 #683 = ORIENTED_EDGE ( 'NONE', *, *, #334, .F. ) ;
 #684 = ORIENTED_EDGE ( 'NONE', *, *, #80, .F. ) ;
 #685 = EDGE_CURVE ( 'NONE', #751, #763, #409, .T. ) ;
 #686 = CARTESIAN_POINT ( 'NONE',  ( 0.04310274982936467700, 0.9077375800253002500, -1.345340128641096600 ) ) ;
 #687 = AXIS2_PLACEMENT_3D ( 'NONE', #52, #523, #107 ) ;
 #688 = ORIENTED_EDGE ( 'NONE', *, *, #780, .F. ) ;
 #689 = CARTESIAN_POINT ( 'NONE',  ( -0.1434656637721816700, 0.8950454831143117600, -1.422291100029821300 ) ) ;
 #690 = ORIENTED_EDGE ( 'NONE', *, *, #682, .F. ) ;
 #691 = VERTEX_POINT ( 'NONE', #527 ) ;
 #692 = ORIENTED_EDGE ( 'NONE', *, *, #926, .F. ) ;
 #693 = ADVANCED_FACE ( 'NONE', ( #408 ), #629, .F. ) ;
 #694 = ORIENTED_EDGE ( 'NONE', *, *, #427, .F. ) ;
 #695 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ;
 #696 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #697 = EDGE_CURVE ( 'NONE', #900, #115, #398, .T. ) ;
 #698 = ORIENTED_EDGE ( 'NONE', *, *, #62, .F. ) ;
 #699 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #700 = EDGE_LOOP ( 'NONE', ( #690 ) ) ;
 #701 = ADVANCED_FACE ( 'NONE', ( #397 ), #536, .F. ) ;
 #702 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #703 = ORIENTED_EDGE ( 'NONE', *, *, #131, .F. ) ;
 #704 = ORIENTED_EDGE ( 'NONE', *, *, #869, .T. ) ;
 #705 = ADVANCED_FACE ( 'NONE', ( #402 ), #281, .T. ) ;
 #706 = VERTEX_POINT ( 'NONE', #58 ) ;
 #707 = ORIENTED_EDGE ( 'NONE', *, *, #896, .T. ) ;
 #708 = ORIENTED_EDGE ( 'NONE', *, *, #934, .F. ) ;
 #709 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
 #710 = ORIENTED_EDGE ( 'NONE', *, *, #127, .T. ) ;
 #711 = AXIS2_PLACEMENT_3D ( 'NONE', #557, #71, #120 ) ;
 #712 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #713 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.750000000000000200 ) ) ;
 #714 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #715 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
 #716 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #717 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #718 = EDGE_CURVE ( 'NONE', #864, #739, #395, .T. ) ;
 #719 = VERTEX_POINT ( 'NONE', #457 ) ;
 #720 = CARTESIAN_POINT ( 'NONE',  ( -0.3419776119402986300, 0.4777107523717784600, -1.000000000000000200 ) ) ;
 #721 = ORIENTED_EDGE ( 'NONE', *, *, #638, .F. ) ;
 #722 = ORIENTED_EDGE ( 'NONE', *, *, #80, .T. ) ;
 #723 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ;
 #724 = CARTESIAN_POINT ( 'NONE',  ( 0.3419776119402984600, 0.4777107523717784600, -1.000000000000000200 ) ) ;
 #725 = EDGE_LOOP ( 'NONE', ( #257 ) ) ;
 #726 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #727 = ORIENTED_EDGE ( 'NONE', *, *, #186, .F. ) ;
 #728 = EDGE_CURVE ( 'NONE', #864, #790, #385, .T. ) ;
 #729 =( CONVERSION_BASED_UNIT ( 'INCH', #465 ) LENGTH_UNIT ( ) NAMED_UNIT ( #267 ) );
 #730 = PLANE ( 'NONE',  #55 ) ;
 #731 = ORIENTED_EDGE ( 'NONE', *, *, #534, .T. ) ;
 #732 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
 #733 = CARTESIAN_POINT ( 'NONE',  ( -0.8000000000000000400, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #734 = CARTESIAN_POINT ( 'NONE',  ( 0.2033659178868795500, 0.8807352497931432200, -3.000000000000000400 ) ) ;
 #735 = CARTESIAN_POINT ( 'NONE',  ( -0.4875000000000000400, 0.6809919235938120000, -3.000000000000000400 ) ) ;
 #736 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ;
 #737 = ORIENTED_EDGE ( 'NONE', *, *, #19, .T. ) ;
 #738 = AXIS2_PLACEMENT_3D ( 'NONE', #546, #475, #471 ) ;
 #739 = VERTEX_POINT ( 'NONE', #370 ) ;
 #740 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #741 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ;
 #742 = ORIENTED_EDGE ( 'NONE', *, *, #752, .T. ) ;
 #743 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.6809919235938120000, -1.000000000000000200 ) ) ;
 #744 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ;
 #745 = CARTESIAN_POINT ( 'NONE',  ( -5.463695987328526400E-016, 0.7373699539794775800, -1.505499999999999600 ) ) ;
 #747 = VERTEX_POINT ( 'NONE', #286 ) ;
 #746 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999999600, 0.6809919235938120000, -1.000000000000000200 ) ) ;
 #748 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
 #749 = CARTESIAN_POINT ( 'NONE',  ( 0.1601970945664288300, 0.8915557081971854400, -1.462559412450504400 ) ) ;
 #750 = ORIENTED_EDGE ( 'NONE', *, *, #956, .F. ) ;
 #751 = VERTEX_POINT ( 'NONE', #373 ) ;
 #752 = EDGE_CURVE ( 'NONE', #59, #706, #380, .T. ) ;
 #753 = VERTEX_POINT ( 'NONE', #811 ) ;
 #754 = ORIENTED_EDGE ( 'NONE', *, *, #45, .F. ) ;
 #755 = AXIS2_PLACEMENT_3D ( 'NONE', #453, #56, #530 ) ;
 #756 = VERTEX_POINT ( 'NONE', #901 ) ;
 #757 = VERTEX_POINT ( 'NONE', #733 ) ;
 #758 = ORIENTED_EDGE ( 'NONE', *, *, #341, .F. ) ;
 #759 = ORIENTED_EDGE ( 'NONE', *, *, #244, .T. ) ;
 #760 = EDGE_CURVE ( 'NONE', #851, #751, #394, .T. ) ;
 #761 = ORIENTED_EDGE ( 'NONE', *, *, #166, .F. ) ;
 #762 = EDGE_LOOP ( 'NONE', ( #946 ) ) ;
 #763 = VERTEX_POINT ( 'NONE', #816 ) ;
 #764 = ORIENTED_EDGE ( 'NONE', *, *, #407, .F. ) ;
 #765 = EDGE_LOOP ( 'NONE', ( #974, #723, #727, #678 ) ) ;
 #766 = EDGE_LOOP ( 'NONE', ( #817, #914, #801, #805, #709, #353 ) ) ;
 #767 = ORIENTED_EDGE ( 'NONE', *, *, #813, .F. ) ;
 #768 = AXIS2_PLACEMENT_3D ( 'NONE', #826, #234, #389 ) ;
 #769 = ORIENTED_EDGE ( 'NONE', *, *, #956, .T. ) ;
 #770 = EDGE_LOOP ( 'NONE', ( #800, #797, #809, #844 ) ) ;
 #771 = ORIENTED_EDGE ( 'NONE', *, *, #697, .T. ) ;
 #772 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ;
 #773 = CARTESIAN_POINT ( 'NONE',  ( 0.01096858461318989600, 0.9089015226106074200, -1.340009181759160600 ) ) ;
 #774 = EDGE_LOOP ( 'NONE', ( #820, #835, #836, #722 ) ) ;
 #775 = EDGE_CURVE ( 'NONE', #848, #927, #376, .T. ) ;
 #776 = ORIENTED_EDGE ( 'NONE', *, *, #775, .T. ) ;
 #777 = EDGE_LOOP ( 'NONE', ( #704, #207, #698, #771 ) ) ;
 #778 = CARTESIAN_POINT ( 'NONE',  ( -0.1569740449793527400, 0.8922638404417874100, -1.451960427187773100 ) ) ;
 #779 = VERTEX_POINT ( 'NONE', #461 ) ;
 #780 = EDGE_CURVE ( 'NONE', #790, #719, #392, .T. ) ;
 #781 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #782 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
 #783 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #784 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #201, #781 ) ;
 #785 = ADVANCED_FACE ( 'NONE', ( #367 ), #360, .T. ) ;
 #786 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ;
 #787 = CARTESIAN_POINT ( 'NONE',  ( -0.5650939646955257500, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #788 = EDGE_LOOP ( 'NONE', ( #679, #123, #847, #7 ) ) ;
 #789 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #790 = VERTEX_POINT ( 'NONE', #384 ) ;
 #791 = VERTEX_POINT ( 'NONE', #11 ) ;
 #792 = ORIENTED_EDGE ( 'NONE', *, *, #244, .F. ) ;
 #793 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.6809919235938120000, -3.000000000000000400 ) ) ;
 #794 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #63, #16 ) ;
 #795 = ORIENTED_EDGE ( 'NONE', *, *, #947, .T. ) ;
 #796 = ADVANCED_FACE ( 'NONE', ( #365 ), #911, .T. ) ;
 #797 = ORIENTED_EDGE ( 'NONE', *, *, #508, .F. ) ;
 #798 = CARTESIAN_POINT ( 'NONE',  ( -0.2374999999999998200, -5.244785863205042700E-017, -3.000000000000000400 ) ) ;
 #799 = ORIENTED_EDGE ( 'NONE', *, *, #859, .T. ) ;
 #800 = ORIENTED_EDGE ( 'NONE', *, *, #284, .F. ) ;
 #801 = ORIENTED_EDGE ( 'NONE', *, *, #45, .T. ) ;
 #802 = PRODUCT_CONTEXT ( 'NONE', #272, 'mechanical' ) ;
 #803 = VERTEX_POINT ( 'NONE', #649 ) ;
 #804 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007300, 0.7373699539794775800, -1.505499999999999600 ) ) ;
 #805 = ORIENTED_EDGE ( 'NONE', *, *, #62, .T. ) ;
 #806 = EDGE_CURVE ( 'NONE', #936, #822, #363, .T. ) ;
 #807 = EDGE_LOOP ( 'NONE', ( #948, #943, #950, #964 ) ) ;
 #808 = CARTESIAN_POINT ( 'NONE',  ( 0.8000000000000000400, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #809 = ORIENTED_EDGE ( 'NONE', *, *, #903, .F. ) ;
 #810 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #811 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #812 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #813 = EDGE_CURVE ( 'NONE', #829, #195, #362, .T. ) ;
 #814 = ORIENTED_EDGE ( 'NONE', *, *, #926, .T. ) ;
 #815 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #816 = CARTESIAN_POINT ( 'NONE',  ( -0.2033659178868795500, 0.8807352497931432200, -3.000000000000000400 ) ) ;
 #817 = ORIENTED_EDGE ( 'NONE', *, *, #26, .T. ) ;
 #818 = ORIENTED_EDGE ( 'NONE', *, *, #9, .F. ) ;
 #819 = ORIENTED_EDGE ( 'NONE', *, *, #414, .F. ) ;
 #820 = ORIENTED_EDGE ( 'NONE', *, *, #89, .F. ) ;
 #821 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #822 = VERTEX_POINT ( 'NONE', #70 ) ;
 #823 = ORIENTED_EDGE ( 'NONE', *, *, #896, .F. ) ;
 #824 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #825 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #826 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000200 ) ) ;
 #827 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #828 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #829 = VERTEX_POINT ( 'NONE', #467 ) ;
 #830 = VERTEX_POINT ( 'NONE', #390 ) ;
 #831 = AXIS2_PLACEMENT_3D ( 'NONE', #295, #748, #179 ) ;
 #832 = EDGE_LOOP ( 'NONE', ( #32, #130, #164, #189 ) ) ;
 #833 = DIRECTION ( 'NONE',  ( -1.370950816492604000E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #834 = CARTESIAN_POINT ( 'NONE',  ( 0.1486841504824485100, 0.8939936438474120900, -1.432010001220678700 ) ) ;
 #835 = ORIENTED_EDGE ( 'NONE', *, *, #427, .T. ) ;
 #836 = ORIENTED_EDGE ( 'NONE', *, *, #166, .T. ) ;
 #837 = ORIENTED_EDGE ( 'NONE', *, *, #541, .F. ) ;
 #838 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #839 = VERTEX_POINT ( 'NONE', #74 ) ;
 #840 = EDGE_CURVE ( 'NONE', #864, #927, #348, .T. ) ;
 #841 = VERTEX_POINT ( 'NONE', #13 ) ;
 #842 = EDGE_CURVE ( 'NONE', #739, #719, #344, .T. ) ;
 #843 = EDGE_LOOP ( 'NONE', ( #853, #855, #856, #764 ) ) ;
 #844 = ORIENTED_EDGE ( 'NONE', *, *, #407, .T. ) ;
 #845 = AXIS2_PLACEMENT_3D ( 'NONE', #963, #441, #50 ) ;
 #846 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ;
 #847 = ORIENTED_EDGE ( 'NONE', *, *, #718, .F. ) ;
 #848 = VERTEX_POINT ( 'NONE', #652 ) ;
 #849 = ORIENTED_EDGE ( 'NONE', *, *, #903, .T. ) ;
 #850 = AXIS2_PLACEMENT_3D ( 'NONE', #182, #973, #632 ) ;
 #851 = VERTEX_POINT ( 'NONE', #920 ) ;
 #852 = VERTEX_POINT ( 'NONE', #15 ) ;
 #853 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ;
 #854 = EDGE_LOOP ( 'NONE', ( #767, #761, #741, #710 ) ) ;
 #855 = ORIENTED_EDGE ( 'NONE', *, *, #240, .T. ) ;
 #856 = ORIENTED_EDGE ( 'NONE', *, *, #199, .F. ) ;
 #857 = ORIENTED_EDGE ( 'NONE', *, *, #127, .F. ) ;
 #858 = ORIENTED_EDGE ( 'NONE', *, *, #575, .T. ) ;
 #859 = EDGE_CURVE ( 'NONE', #156, #115, #358, .T. ) ;
 #860 = CARTESIAN_POINT ( 'NONE',  ( -0.02169339886360440200, 0.9086646133200405600, -1.341070620153132200 ) ) ;
 #861 = AXIS2_PLACEMENT_3D ( 'NONE', #444, #149, #345 ) ;
 #862 = CARTESIAN_POINT ( 'NONE',  ( -0.1643964897245952800, 0.8906226517141285800, -1.483550277347146300 ) ) ;
 #863 = VERTEX_POINT ( 'NONE', #76 ) ;
 #864 = VERTEX_POINT ( 'NONE', #472 ) ;
 #865 = ORIENTED_EDGE ( 'NONE', *, *, #9, .T. ) ;
 #866 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #867 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #868 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ;
 #869 = EDGE_CURVE ( 'NONE', #115, #751, #346, .T. ) ;
 #870 = ADVANCED_FACE ( 'NONE', ( #331 ), #91, .T. ) ;
 #871 = EDGE_LOOP ( 'NONE', ( #750, #20, #49, #68 ) ) ;
 #872 = ORIENTED_EDGE ( 'NONE', *, *, #806, .T. ) ;
 #873 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #874 = VERTEX_POINT ( 'NONE', #506 ) ;
 #875 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #876 = ADVANCED_FACE ( 'NONE', ( #375 ), #957, .F. ) ;
 #877 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #878 = ORIENTED_EDGE ( 'NONE', *, *, #484, .T. ) ;
 #879 = EDGE_LOOP ( 'NONE', ( #823, #795, #933, #902, #941, #940, #868, #904, #819, #758, #129, #961 ) ) ;
 #880 = DIMENSIONAL_EXPONENTS ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ;
 #881 = DIRECTION ( 'NONE',  ( -2.208330889770546000E-016, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #882 = ORIENTED_EDGE ( 'NONE', *, *, #508, .T. ) ;
 #883 = ORIENTED_EDGE ( 'NONE', *, *, #30, .T. ) ;
 #884 = EDGE_LOOP ( 'NONE', ( #799, #662, #754, #888, #772 ) ) ;
 #885 = FILL_AREA_STYLE_COLOUR ( '', #282 ) ;
 #886 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
 #887 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #404, #466 ) ;
 #888 = ORIENTED_EDGE ( 'NONE', *, *, #26, .F. ) ;
 #889 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
 #890 = EDGE_LOOP ( 'NONE', ( #968, #117, #85, #24 ) ) ;
 #891 = EDGE_LOOP ( 'NONE', ( #865, #708, #786, #684, #921, #916, #910, #906, #922, #930, #110, #707 ) ) ;
 #892 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #274 ) ;
 #893 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #894 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #895 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #896 = EDGE_CURVE ( 'NONE', #753, #791, #338, .T. ) ;
 #897 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #898 = EDGE_LOOP ( 'NONE', ( #287, #299, #311, #368 ) ) ;
 #899 = ORIENTED_EDGE ( 'NONE', *, *, #478, .T. ) ;
 #900 = VERTEX_POINT ( 'NONE', #695 ) ;
 #901 = CARTESIAN_POINT ( 'NONE',  ( 0.2374999999999999900, 0.8356249999999997300, -3.000000000000000400 ) ) ;
 #902 = ORIENTED_EDGE ( 'NONE', *, *, #840, .F. ) ;
 #903 = EDGE_CURVE ( 'NONE', #852, #822, #325, .T. ) ;
 #904 = ORIENTED_EDGE ( 'NONE', *, *, #534, .F. ) ;
 #905 = ORIENTED_EDGE ( 'NONE', *, *, #752, .F. ) ;
 #906 = ORIENTED_EDGE ( 'NONE', *, *, #459, .F. ) ;
 #907 = ORIENTED_EDGE ( 'NONE', *, *, #240, .F. ) ;
 #908 = AXIS2_PLACEMENT_3D ( 'NONE', #258, #434, #38 ) ;
 #910 = ORIENTED_EDGE ( 'NONE', *, *, #575, .F. ) ;
 #909 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #911 = PLANE ( 'NONE',  #603 ) ;
 #912 = CARTESIAN_POINT ( 'NONE',  ( -0.8999999999999999100, 0.1607017767938239100, -0.9996062992125985800 ) ) ;
 #913 = AXIS2_PLACEMENT_3D ( 'NONE', #640, #73, #560 ) ;
 #914 = ORIENTED_EDGE ( 'NONE', *, *, #22, .F. ) ;
 #915 = ORIENTED_EDGE ( 'NONE', *, *, #806, .F. ) ;
 #916 = ORIENTED_EDGE ( 'NONE', *, *, #638, .T. ) ;
 #917 = CARTESIAN_POINT ( 'NONE',  ( 0.1654999999999996500, 0.7373699539794775800, -1.505499999999999600 ) ) ;
 #918 = EDGE_LOOP ( 'NONE', ( #595, #858, #584, #572 ) ) ;
 #919 = EDGE_LOOP ( 'NONE', ( #221, #243, #255, #271 ) ) ;
 #920 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000009500, 0.7373699539794775800, -3.000000000000000400 ) ) ;
 #921 = ORIENTED_EDGE ( 'NONE', *, *, #813, .T. ) ;
 #922 = ORIENTED_EDGE ( 'NONE', *, *, #284, .T. ) ;
 #923 = CARTESIAN_POINT ( 'NONE',  ( 0.1315959633413563700, 0.8972652091767202600, -1.404557255450115800 ) ) ;
 #924 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.250000000000000000 ) ) ;
 #925 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.750000000000000400 ) ) ;
 #926 = EDGE_CURVE ( 'NONE', #848, #660, #326, .T. ) ;
 #927 = VERTEX_POINT ( 'NONE', #787 ) ;
 #928 = AXIS2_PLACEMENT_3D ( 'NONE', #212, #270, #881 ) ;
 #929 = EDGE_LOOP ( 'NONE', ( #388, #405, #631, #505 ) ) ;
 #930 = ORIENTED_EDGE ( 'NONE', *, *, #199, .T. ) ;
 #931 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
 #932 = EDGE_LOOP ( 'NONE', ( #152, #82, #907, #759 ) ) ;
 #933 = ORIENTED_EDGE ( 'NONE', *, *, #478, .F. ) ;
 #934 = EDGE_CURVE ( 'NONE', #803, #21, #339, .T. ) ;
 #935 = EDGE_LOOP ( 'NONE', ( #971, #77, #905, #509, #731, #163, #614, #128 ) ) ;
 #936 = VERTEX_POINT ( 'NONE', #438 ) ;
 #937 = VERTEX_POINT ( 'NONE', #101 ) ;
 #938 = ORIENTED_EDGE ( 'NONE', *, *, #459, .T. ) ;
 #939 = VERTEX_POINT ( 'NONE', #702 ) ;
 #940 = ORIENTED_EDGE ( 'NONE', *, *, #665, .F. ) ;
 #941 = ORIENTED_EDGE ( 'NONE', *, *, #718, .T. ) ;
 #942 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
 #943 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ;
 #944 = VERTEX_POINT ( 'NONE', #150 ) ;
 #945 = CARTESIAN_POINT ( 'NONE',  ( -0.05327696250579244000, 0.9070723181441187100, -1.348433480799067900 ) ) ;
 #946 = ORIENTED_EDGE ( 'NONE', *, *, #682, .T. ) ;
 #947 = EDGE_CURVE ( 'NONE', #753, #841, #317, .T. ) ;
 #948 = ORIENTED_EDGE ( 'NONE', *, *, #89, .T. ) ;
 #949 = EDGE_LOOP ( 'NONE', ( #818, #238, #878, #736 ) ) ;
 #950 = ORIENTED_EDGE ( 'NONE', *, *, #131, .T. ) ;
 #951 = CARTESIAN_POINT ( 'NONE',  ( -0.1655000000000007000, 0.8903699539794772700, -1.505499999999999600 ) ) ;
 #952 = VERTEX_POINT ( 'NONE', #793 ) ;
 #953 = CARTESIAN_POINT ( 'NONE',  ( 0.3419776119402984600, 0.4777107523717784600, -1.000000000000000200 ) ) ;
 #954 = EDGE_LOOP ( 'NONE', ( #703, #94, #846, #837, #250, #883, #742, #645, #931, #675, #507, #967, #769, #688, #79, #814 ) ) ;
 #955 = ADVANCED_FACE ( 'NONE', ( #318 ), #265, .F. ) ;
 #956 = EDGE_CURVE ( 'NONE', #944, #719, #315, .T. ) ;
 #957 = PLANE ( 'NONE',  #908 ) ;
 #958 = PLANE ( 'NONE',  #498 ) ;
 #959 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -3.000000000000000400 ) ) ;
 #960 = ADVANCED_FACE ( 'NONE', ( #310 ), #308, .F. ) ;
 #961 = ORIENTED_EDGE ( 'NONE', *, *, #205, .F. ) ;
 #962 = CARTESIAN_POINT ( 'NONE',  ( 0.8999999999999999100, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #963 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -1.000000000000000200 ) ) ;
 #964 = ORIENTED_EDGE ( 'NONE', *, *, #113, .T. ) ;
 #965 = AXIS2_PLACEMENT_3D ( 'NONE', #463, #399, #838 ) ;
 #966 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #967 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ;
 #968 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ;
 #969 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( $, .METRE. ) );
 #970 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.1607017767938239100, -2.250000000000000400 ) ) ;
 #971 = ORIENTED_EDGE ( 'NONE', *, *, #859, .F. ) ;
 #972 = SURFACE_SIDE_STYLE ('',( #314 ) ) ;
 #973 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
 #974 = ORIENTED_EDGE ( 'NONE', *, *, #147, .T. ) ;
 ENDSEC;
 END-ISO-10303-21;
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_1.step
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_1.step
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_2.step
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_2.step
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_3.step
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Clamp_3.step
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Adjust.step
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Adjust.step
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Plate.step
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STEP/Treillage_Rear_Plate.step
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Arm.STL
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Arm.STL
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_1.STL
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_1.STL
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_2.STL
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Base_2.STL
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_1.STL
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_1.STL
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_2.STL
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_2.STL
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_3.STL
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Clamp_3.STL
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Adjust.STL
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Adjust.STL
--- a/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Plate.STL
+++ b/Rifles/AR-15_Treillage_Stock-Warfairy/STL/Treillage_Rear_Plate.STL