Upgrading WarFairy Charon v3.0 to AR-15 WarFairy Charon Lower Receiver v4.0 by Warfairy.

Rifles/AR-15_WarFairy_Charon_Lower_Receiver_v4_Warfairy/README.md

@@ -1,40 +1,39 @@
-# WarFairy Charon Version 3
+# WarFairy Charon AR-15 Lower Receiver
+
+#### Author
+Warfairy
 
 #### Version
-
-3.0
+v4.0
 
 #### Description
+This is the Charon AR-15 Modular Lower Receiver System version 4.0. This glorious design has take over two years in the making. It is a modular single piece AR receiver requiring a LPK and Upper for a fully functioning do it yourself rifle...woo hoo!
 
-After far too long and a massive bout of data corruption across my entire hard drive, V3 of the Charon is finally ready. If you have any data issues with any file, please contact me via the #fosscad channel on irc.oftc.net or email me at shanrilivan@yahoo.com. Please include screenshots of the data issues or error messages. I have checked every file as thoroughly as I can with a limping system.
-
-#### Changelog
-
-* Modularization and choices (36 possible firearms)!
+#### Changelog:
+* Changed forward takedown lugs to use 1/4" bolts rather than AR takedown pins
 * Relief cut on grips to allow easier access to safety.
+* Relief cut on upright grip for middle finger to rest more comfortably.
+* Centering of Buffer Tube opening and slight enlargement for greater reliability and margin of safety.
 * All parts oriented for printing.
-* Significant reduction of overhangs for easier printing.
+* Removal of Bolt Hold Open for strength.
 
-#### General instructions
-
-This release has been totally modularized. To create a firearm, you will need to select Magwell_3a or 3b, Buffer_Tube_1 or 2, Grip_1 or 2, and finally the Stock of your choice. The Unbuffered Pistol and Vanilla receiver are located in the Stocks folder and only have the options of Magwell_3a or 3b.
+#### General instructions:
+This release has been totally modularized. To create a firearm, you will need to select Magwell_3a, 3b, or 3c, Buffer_Tube_1 or 2, Grip_1 or 2, and finally the Stock of your choice. The Unbuffered Pistol and Vanilla receiver are located in the Stocks folder and only have the options of Magwell_3a, 3b, or 3C.
 
 If printing the Carbine, Rifle, or Kommando, all Auxiliary parts are located in the Extra Parts folder.
 
 There is a hollow on the right side of the magazine well for use with the panels in the Magazine Well folder. A blank panel is included for you to modify to your own taste or to fill the indent if you don't want a logo or to personalize. This area will also allow any manufacturers to easily make a serialized insert.
 
-You will need to print 8 parts for each firearm receiver, with the logo panel being the ninth, (Excluding the Vanilla Receiver (5 parts) and Unbuffered Pistol (6 parts)) consisting of: Magwell (3 parts), Grip, Buffer Tube (2 Parts), Stock (2 parts).
+You will need to print 8 parts for each firearm receiver, with the logo panel being the ninth, (Excluding the Vanilla Receiver (5 parts) and Unbuffered Pistol (6 parts)) consisting of: Magwell (3 parts), Grip, Buffer Tube (2 Parts), Stock (2 parts). If you use Magwell 3C, you do not need the other two Magwell parts.
 
 #### Parts List
+-Buffer Tubes
+-Buffer_Tube_1a = Part 1, smooth buffer tube
+-Buffer_Tube_1b = Part 2, smooth buffer tube
+-Buffer_Tube_2a = Part 1, SOPMOD buffer tube
+-Buffer_Tube_2b = Part 2, SOPMOD buffer tube
 
-##### Buffer Tubes
-
-* Buffer_Tube_1a = Part 1, smooth buffer tube
-* Buffer_Tube_1b = Part 2, smooth buffer tube
-* Buffer_Tube_2a = Part 1, SOPMOD buffer tube
-* Buffer_Tube_2b = Part 2, SOPMOD buffer tube
-
-##### Extra Parts
+#####Extra Parts
 
 -Adjustable Carbine
 * Butt_Pad = Shoulder "pad" for adjustable stock
@@ -43,11 +42,11 @@ You will need to print 8 parts for each firearm receiver, with the logo panel be
 * Plunger_Pin = Pin to allow adjustment of stock
 * Stock_Arm = Adjustable stock slider
 
-##### Common
+-Common
 * Buffer_Retainer_Tube_Plug = Holds buffer retainer and spring in place (insert through stock cut-out)
 * Rear_Takedown_Pin = Printed rear takedown pin (tested w/ 5.56 without breakage)
 
-##### Rifle and Kommando
+-Rifle and Kommando
 * Kommando_rear_Release = Secondary magazine release for rear mag holder
 * Kommando_Rear_Release_Pin = Hinge pin for secondary magazineholder
 * Rifle_Butt_Pad = Rear "pad" for both Rifle and Kommando
@@ -55,18 +54,18 @@ You will need to print 8 parts for each firearm receiver, with the logo panel be
 * Spacer = 10mm thick spacer for stock. Allows adjustment of length.
 * Stock_Pegs = aligns spacer, stock cap and butt pads to each other.
 
-##### Grips
+-Grips
 * Grip_1 = Sloped P90 style grip
 * Grip_2 = Traditional upright style grip
 
-##### Magazine Well
+-Magazine Well
 * Magwell_1 = Upper portion of common magwell
 * Magwell_2 = Middle portion of common Magwell
 * Magwell_3a = Lower portion of common magwell, no finger hook
 * Magwell_3b = Lower portion of common magwell, w/ finger hook
+* Magwell_3c = Entire forward magwell portion with Phobos style cut
 
-##### Panels
-* Panels = Inserts for indent on right side of magazine well
+-Panels = Inserts for indent on right side of magazine well
 * Blank = Can be modified by user to personalize receiver or left blank for smooth sides
 * Pirate_Logo = Pirate Logo insert, skull w/bandana and crossed swords
 * Pirate_Medic = Pirate Medic insert, skull w/ crossed swords and medical symbols
@@ -74,7 +73,7 @@ You will need to print 8 parts for each firearm receiver, with the logo panel be
 * WarFairy = Text, "WARFAIRY ARMS, YOU ARE FREE MEN, ACT LIKE IT."
 * WarFairy_Logo = WarFairy Arms Logo
 
-##### Stocks
+-Stocks
 * Charon_V3_Carbine_1 = Forward section of Carbine Stock
 * Charon_V3_Carbine_2 = Rear section of Carbine Stock
 * Charon_V3_Kommando_1 = Forward Section of Kommando Stock
@@ -84,36 +83,32 @@ You will need to print 8 parts for each firearm receiver, with the logo panel be
 * Charon_V3_Rifle_1 = Forward section of Rifle Stock
 * Charon_V3_Rifle_2 = Rear section of Rifle Stock
 
-##### Unbuffered Pistol
+-Unbuffered Pistol
 * Unbuffered_Pistol_1 = Grip for Unbuffered Pistol
 * Unbuffered_Pistol_2 = Rear section of Unbuffered Pistol Lower
 * Unbuffered_Pistol_3 = upper section of Unbuffered Pistol Lower
 
-##### Vanilla_Charon
+-Vanilla_Charon
 * Vanilla_1 = Receiver Section of Vanilla Lower
 * Vanilla_2 = Buffer Tower section of Vanilla lower
 
-#### Printing Instructions
+
+#### Printing Instructions:
 All parts are oriented for direct printing. I leave print options up to you and your individual printer, but I highly reccommend printing at the lowest possible layer height, and I insist you use 100% infill for your own safety. Try not to use support material for Magwell_1 and 2 or for either Grip section. Slic3r has a nasty habit of filling in essential holes. I HIGHLY recommend Cura as a slicing program. Not only does it allow you to position multiple items on the bed at once, its gcode generation and support material are FAR more forgiving than Slic3r.
 
-#### Assembly Instructions
+#### Assembly Instructions:
 The guide nubs and divots on each part should steer you in the right direction as far as location. I highly recommend using a proper ABS Cement and allowing at least 24 hours after gluing before test firing. Ensure the Fire control pocket and buffer tubes are clear of any support material or significant deviations before assembly. Assemble 3 parts of Magwell first. Ensure bolt release slot and magazine release tube are well formed and free of obstruction. Apply grip to magwell. Assemble Stock Sections. Apply Stock to grip. Place buffer tube sections into respective areas on upper flat of stock and grip. Allow glue to set before test fire.
 
-#### Magazine Release Cover
-For California residents: Legality of this part is unknown, but should satisfy the law requiring a tool to release the magazine. Print as oriented, and glue in place over top of the magazine relase after it is installed, with the highest corner to the bottom and rear.
+*Warnings: * THESE FILES ARE UNTESTED. PRINT AND FIRE AT YOUR OWN RISK.
 
-
-#### Warnings
-THESE FILES ARE UNTESTED. PRINT AND FIRE AT YOUR OWN RISK. I assume no responsibilty.
-
-#### Final Words
-In this day and age, this project and these releases are more important to me than I can tell you. These files are open source. They are now yours. Chop them, hack them, twist them, make them yours. Only you can make exactly the firearm you want, and I've now given you a modular system to make it that much easier.
+#### Author's note:
+In this day and age, this project and these releases are more important to me than I can tell you. I reserve no rights to these files. They are now yours. Chop them, hack them, twist them, make them yours. Only you can make exactly the firearm you want, and I've now given you a modular system to make it that much easier.
 
 Be safe, have fun.
 
 You are Free Men,
 act like it!
 
-WarFairy, September 1, 2013
+WarFairy, October 24, 2015