Removing unfinished firearm at author's request.

Firearms/The_Holdout_v3.0-RollaTroll/README.md

@@ -1,68 +0,0 @@
-# The Holdout v3.0
-
-####General Information and Warnings
-
-First off, this is a 3d printed gun. It is in not in ___any___ way guaranteed to be safe or legal. The author has tried to the best of his abilities to make it as printable, safe, economical and law abiding as possible, but no guarantees can be made. The author will take no responsibility for ___any___ issues that may be caused in ___any___ way by the manufacture, use, possession, modification, distribution or other act involving this design. 3d printing is an emerging field, and printed guns are in their infancy, so take all safety precautions.
-
-####Printing
-
-Print one of each part ***except***:  
-_20mm\_Nail\_Rounded_  
-_Steel\_Piece_  
-They are provided for reference only.
-You ___MUST___ use ABS filament or stronger. ___PLA WILL BLOW UP___.
-\*RollaTroll death stares all who have published and publicized biased results\*
-
-#####**Printing orientations:**  
-
-* **Barrel** – Vertical, with the bore perpendicular to the print bed. The front sights should not be against the print bed.   
-* **Barrel Block Left/Right** – Vertical, so the protrusions from the main flat face slope up and outward. A partial circle should be flush to the print bed.
-* **Barrel Lock** – Vertical, so the head is flush to the print bed.
-* **Grip Thickener Left/Right** – Horizontal, so the bevelled protrusions on the larger flat surface face upwards. The piece should lay flat and taper upward outward.
-* **Hammer** – Horizontal, either side is ok.
-* **Nail Buffer** – Horizontal, either side will work.
-* **Sear** – Horizontal, on its left side. There should be no overhang.
-* **Sear Rod** – Vertical, on its head preferable. Either way should work though.
-* **Side Left/Right** – Horizontal. Should be obvious, but the large flat face is flush against the print bed.
-* **Trigger** – Horizontal, on its right side. There should be no overhang.
-
-#### Hardware
-
-#####**Collect:**  
-
-1 **X** 20mm Nail  
-1 **X** 1 inch Plain Steel Flat Bar with 1/4 inch thickness, at least 4 inches long ([this](http://x0.no/ir7s "The Home Depot") is recommended).  
-3 **X** Rubber band (orthodontics works great. Try [these](http://x0.no/irsu "Amazon")).  
-1 **X** Epoxy
-
-#### Preparation and Assembly
-
-To avoid accidents, do all of the following instructions first without epoxy. Once you are sure everything fits, only then should you glue everything together.
-
-Cut 2 **X** 2 inch (50.8mm) lengths of the steel bar. Err on the side of caution, it has been allowed for. Assuming you are using the recommended lengths of steel, the combined weight should be well over the 3.7oz required by law.
-
-Epoxy 1 piece of steel into each _Side_. Loop rubber bands to the _Hammer_ and _Sear_ (not to each other, just secure the rubber band to the piece). To do so, one must thread one end of the loop through the hole in the part, pull it back around and thread it through the other end of the band. See [this](http://i.imgur.com/2Gqd23W.jpg "Imgur") if you are confused. If you still can't work it out, I think you have some deeper problems to worry about.
-
-Fit the _Sear_ onto the _Trigger_ and epoxy the _Sear Rod_ in. Make sure the sear can still turn smoothly, and no excess epoxy has gotten in the way. You may also fit the _Hammer_ in place on the _Left Side_. This should be fairly self-explanatory. The rubber band should loop onto the rod above it. As this design (at the time of writing) has not been tested, one may need to use multiple rubber bands to create tension sufficient for firing.
-
-One should be able to lay the 20mm Nail in the groove meant for it. The _Nail Buffer_ should fit in the area behind it, keeping the nail from sliding back into the main cavity of the weapon, while the head should keep it from sliding forward. The _Trigger_ and _Sear_ may also be placed into the Left Side at this time. One should loop a rubber band from the rod integrated into the _Trigger_ to the rod just forward and down from it. It may require some looping of the rubber band to make it short enough.
-
-You should now be glue to epoxy the _Right Side_ onto the left. Put a bit of epoxy in each reciprocating hole and on all interfacing surfaces, especially the steel piece. There's no going back now. You should be able to test the firing mechanism at this point. If all works, you may now glue the _Barrel Blocks_ in place. This should be obvious as to how it fits, so long as you have to correct pieces for each side. The grip thickeners can also be done, and should be even more obvious. Let it all sit for a day or so.
-
-One everything has set up, slot the _Barrel_ on and press the _Barrel Lock_ in to the barrel in place. One should be able to have it rotated so it out of the way of the trigger area. If all is as it should be, test firing should now be possible.
-
-Rotate the _Barrel Lock_ down, and you should be able to pull it out. Slide the _Barrel_ off, load it, and secure it all again. Be sure to have a remote firing setup (clamp and string). If it works, ___YAY___. If not, maybe try again? This is why you must make sure you use enough rubber bands to begin with. There is no going back if it isn’t powerful enough. Granted, as much as this whole design weighs, printing it all over again shouldn't take too long. If there is a definite problem, check the [FOSSCAD IRC](http://webchat.oftc.net/?randomnick=0&channels=fosscad&prompt=1&uio=d4 "Webclient") for help. If it is an issue with the design itself, get into contact with RollaTroll on there too.
-
-#### History and Other Notes
-
-This is a bit more of a personal note here, from the designer.
-I started v1 of this design in January of 2014. Having recently finished the Harry Potter series (not for the first time), I fell into a state of listlessness I call '_**P**ost **H**arry **P**otter **D**epression_', or **PHPD**. I then decided to keep myself occupied, and set myself to design this. It took about a month and a half to finish. v2 started a couple month or so later, and took another 8 months to finish completely, though it was largely done within about 6 months. v2 had become bloated and impractical in feature structure; I was cutting bits out and putting them back in more than I was actually getting work done. So I started v3 once most things were done on v2. v3 was a complete remake from scratch, though it was based off the profile of v2. It then evolved and quickly superseded v2. I finally finished v2.1 late December, 235 days after starting that version. v3 was finished in just over 3 months, quite an improvement on the time it took for v2. All CAD work for this design was finished _exactly_ 1 year after its beginning. I will admit, I was 1 hour 25 minutes late, but I was at a conference, and time got short :P
-
-Anyway, this design marks the end of guns from me for a while. I _will_ return, but I think this should tide things over. I would love to see someone else make a better design, as I have been filling this niche for a while now. I am untrained, so I have no doubt things can be done better. Along with that though, I hope this can replace the Liberator. It is better in almost every measurable way. Printability, weight, safety and durability. So stop saying printed guns are horrible, the Liberator was a stepping stone, not the final product. This too is only a stepping stone, so feel free to modify this as you wish. If you modify this, it is highly recommended that you credit me in some way. Please do not redistribute this outside of the FOSSCAD Megapack. I do not want this publicized, though I understand I cannot stop it.
-
-All the best! Be safe and have fun.
-
-▒█▀▀█ █▀▀█ █░░ █░░ █▀▀█ ▀▀█▀▀ █▀▀█ █▀▀█ █░░ █░░   
-▒█▄▄▀ █░░█ █░░ █░░ █▄▄█ ░▒█░░ █▄▄▀ █░░█ █░░ █░░   
-▒█░▒█ ▀▀▀▀ ▀▀▀ ▀▀▀ ▀░░▀ ░▒█░░ ▀░▀▀ ▀▀▀▀ ▀▀▀ ▀▀▀   
-

Firearms/The_Holdout_v3.0-RollaTroll/STEP/20mm_Nail_Rounded.step

@@ -1,439 +0,0 @@
-ISO-10303-21;
-HEADER;
-FILE_DESCRIPTION (( 'STEP AP214' ),
-    '1' );
-FILE_NAME ('20mm_Nail_Rounded.step',
-    '2015-01-13T04:29:49',
-    ( '' ),
-    ( '' ),
-    'SwSTEP 2.0',
-    'SolidWorks 2015',
-    '' );
-FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
-ENDSEC;
-
-DATA;
-#1 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #9, 'design' ) ;
-#2 = LINE ( 'NONE', #14, #307 ) ;
-#3 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #46, #283, #76, #284 ),
- .UNSPECIFIED., .F., .T. ) 
- B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
- ( 3.141592653589790000, 3.926990816987240100 ),
- .UNSPECIFIED. ) 
- CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9492530216741910100, 0.9492530216741910100, 1.000000000000000000 ) ) 
- REPRESENTATION_ITEM ( '' )  );
-#4 = ORIENTED_EDGE ( 'NONE', *, *, #353, .F. ) ;
-#5 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 20.00000000000000400 ) ) ;
-#6 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#7 = VECTOR ( 'NONE', #140, 1000.000000000000000 ) ;
-#8 = VERTEX_POINT ( 'NONE', #123 ) ;
-#9 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#10 = EDGE_CURVE ( 'NONE', #328, #163, #129, .T. ) ;
-#11 = CARTESIAN_POINT ( 'NONE',  ( 0.8750000000000134300, 0.2351659643066096000, 16.99999999999995700 ) ) ;
-#12 = LINE ( 'NONE', #73, #18 ) ;
-#13 = ORIENTED_EDGE ( 'NONE', *, *, #191, .F. ) ;
-#14 = CARTESIAN_POINT ( 'NONE',  ( 5.094213649851588400, 5.094213649851642600, 2.534124629080097200 ) ) ;
-#15 = CARTESIAN_POINT ( 'NONE',  ( 1.500000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#16 = DIRECTION ( 'NONE',  ( 0.9599999999999999600, 3.351822085289407900E-015, -0.2800000000000001400 ) ) ;
-#17 = ORIENTED_EDGE ( 'NONE', *, *, #70, .T. ) ;
-#18 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ;
-#19 = DIRECTION ( 'NONE',  ( 0.2696299255199701700, 0.2696299255199710600, 0.9244454589256145800 ) ) ;
-#20 = FACE_OUTER_BOUND ( 'NONE', #369, .T. ) ;
-#21 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#22 = DIRECTION ( 'NONE',  ( -0.2800000000000000800, 0.0000000000000000000, 0.9599999999999999600 ) ) ;
-#23 = SURFACE_STYLE_USAGE ( .BOTH. , #199 ) ;
-#24 = AXIS2_PLACEMENT_3D ( 'NONE', #319, #197, #22 ) ;
-#25 = ORIENTED_EDGE ( 'NONE', *, *, #166, .F. ) ;
-#26 = CARTESIAN_POINT ( 'NONE',  ( -0.2562815664617726400, -0.9811553006147040200, 16.63603896932101700 ) ) ;
-#27 = ADVANCED_FACE ( 'NONE', ( #20 ), #259, .T. ) ;
-#28 = EDGE_CURVE ( 'NONE', #120, #328, #58, .T. ) ;
-#29 = PRESENTATION_STYLE_ASSIGNMENT (( #277 ) ) ;
-#30 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ;
-#31 = AXIS2_PLACEMENT_3D ( 'NONE', #35, #66, #276 ) ;
-#32 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.7500000000000006700 ) ) ;
-#33 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.9599999999999999600, -0.2800000000000001400 ) ) ;
-#34 = EDGE_LOOP ( 'NONE', ( #237, #183, #221, #173 ) ) ;
-#35 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.500000000000000200, 0.7500000000000006700 ) ) ;
-#36 = FILL_AREA_STYLE_COLOUR ( '', #104 ) ;
-#37 = EDGE_LOOP ( 'NONE', ( #44, #344 ) ) ;
-#38 = CARTESIAN_POINT ( 'NONE',  ( -0.2562815664617780800, 0.9811553006147008000, 16.63603896932103200 ) ) ;
-#39 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#40 = ADVANCED_BREP_SHAPE_REPRESENTATION ( '20mm_Nail_Rounded', ( #270, #260 ), #53 ) ;
-#41 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 20.00000000000000400 ) ) ;
-#42 = FACE_OUTER_BOUND ( 'NONE', #334, .T. ) ;
-#43 = AXIS2_PLACEMENT_3D ( 'NONE', #235, #59, #264 ) ;
-#44 = ORIENTED_EDGE ( 'NONE', *, *, #316, .T. ) ;
-#45 = CARTESIAN_POINT ( 'NONE',  ( -0.5719714462379902300, -0.5719714462379936700, 18.03895504146974500 ) ) ;
-#46 = CARTESIAN_POINT ( 'NONE',  ( -0.8750000000000135400, 1.071565949253950700E-016, 16.99999999999996100 ) ) ;
-#47 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#48 = CARTESIAN_POINT ( 'NONE',  ( 1.500000000000000200, 0.0000000000000000000, 0.7500000000000006700 ) ) ;
-#49 = ORIENTED_EDGE ( 'NONE', *, *, #353, .T. ) ;
-#50 = EDGE_CURVE ( 'NONE', #282, #120, #71, .T. ) ;
-#51 = CARTESIAN_POINT ( 'NONE',  ( 0.6168140076230512700, -1.500641922375447800E-014, 17.88520911672097200 ) ) ;
-#52 = CARTESIAN_POINT ( 'NONE',  ( -1.500000000000000000, 1.836970198721029900E-016, 0.0000000000000000000 ) ) ;
-#53 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #108 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #124, #332, #152 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#54 = CARTESIAN_POINT ( 'NONE',  ( 0.6187184335382425200, -0.6187184335382321900, 17.87867965644033700 ) ) ;
-#55 = CYLINDRICAL_SURFACE ( 'NONE', #162, 0.8750000000000135400 ) ;
-#56 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#57 = ORIENTED_EDGE ( 'NONE', *, *, #28, .T. ) ;
-#58 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #96, #365, #38, #249 ),
- .UNSPECIFIED., .F., .F. ) 
- B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
- ( 2.356194490192351100, 3.926990816987243600 ),
- .UNSPECIFIED. ) 
- CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243658300, 0.8047378541243658300, 1.000000000000000000 ) ) 
- REPRESENTATION_ITEM ( '' )  );
-#59 = DIRECTION ( 'NONE',  ( -0.7071067811865503500, 0.7071067811865449100, 0.0000000000000000000 ) ) ;
-#60 = VECTOR ( 'NONE', #6, 1000.000000000000000 ) ;
-#61 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ;
-#62 = ADVANCED_FACE ( 'NONE', ( #168 ), #318, .T. ) ;
-#63 = CIRCLE ( 'NONE', #245, 0.8750000000000045500 ) ;
-#64 = ORIENTED_EDGE ( 'NONE', *, *, #215, .T. ) ;
-#65 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#66 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#67 = CYLINDRICAL_SURFACE ( 'NONE', #107, 1.500000000000000000 ) ;
-#68 = SURFACE_SIDE_STYLE ('',( #285 ) ) ;
-#69 = EDGE_LOOP ( 'NONE', ( #227, #373, #358, #77 ) ) ;
-#70 = EDGE_CURVE ( 'NONE', #101, #282, #12, .T. ) ;
-#71 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #219, #11, #157, #366 ),
- .UNSPECIFIED., .F., .T. ) 
- B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
- ( 3.141592653589783300, 3.926990816987235600 ),
- .UNSPECIFIED. ) 
- CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9492530216741906800, 0.9492530216741906800, 1.000000000000000000 ) ) 
- REPRESENTATION_ITEM ( '' )  );
-#72 = CYLINDRICAL_SURFACE ( 'NONE', #302, 0.8750000000000135400 ) ;
-#73 = CARTESIAN_POINT ( 'NONE',  ( 0.8750000000000135400, 0.0000000000000000000, 20.00000000000000400 ) ) ;
-#74 = ORIENTED_EDGE ( 'NONE', *, *, #305, .F. ) ;
-#75 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#76 = CARTESIAN_POINT ( 'NONE',  ( -0.7850058816037139800, -0.4524309854727639500, 17.30855126307298200 ) ) ;
-#77 = ORIENTED_EDGE ( 'NONE', *, *, #207, .T. ) ;
-#78 = CARTESIAN_POINT ( 'NONE',  ( -0.5719714462379954500, 0.5719714462379595900, 18.03895504146974500 ) ) ;
-#79 = DIRECTION ( 'NONE',  ( -0.2696299255199736100, 0.2696299255199707800, 0.9244454589256136900 ) ) ;
-#80 = DIRECTION ( 'NONE',  ( -0.2799999999999995800, 0.0000000000000000000, 0.9600000000000000800 ) ) ;
-#81 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.9599999999999999600, -0.2800000000000001400 ) ) ;
-#82 = LINE ( 'NONE', #226, #220 ) ;
-#83 = ORIENTED_EDGE ( 'NONE', *, *, #191, .T. ) ;
-#84 = AXIS2_PLACEMENT_3D ( 'NONE', #346, #170, #378 ) ;
-#85 = LINE ( 'NONE', #294, #7 ) ;
-#86 = EDGE_LOOP ( 'NONE', ( #153, #106, #139, #94, #354 ) ) ;
-#87 = ADVANCED_FACE ( 'NONE', ( #241 ), #97, .F. ) ;
-#88 = EDGE_CURVE ( 'NONE', #216, #193, #156, .T. ) ;
-#89 = LINE ( 'NONE', #187, #379 ) ;
-#90 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ;
-#91 = AXIS2_PLACEMENT_3D ( 'NONE', #359, #33, #244 ) ;
-#92 = CARTESIAN_POINT ( 'NONE',  ( 1.500000000000000000, 0.0000000000000000000, 20.00000000000000400 ) ) ;
-#93 = CARTESIAN_POINT ( 'NONE',  ( -1.500000000000000400, 1.836970198721030400E-016, 0.7500000000000006700 ) ) ;
-#94 = ORIENTED_EDGE ( 'NONE', *, *, #166, .T. ) ;
-#95 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#96 = CARTESIAN_POINT ( 'NONE',  ( 0.6187184335382381900, 0.6187184335382461800, 17.87867965644030500 ) ) ;
-#97 = PLANE ( 'NONE',  #361 ) ;
-#98 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.9599999999999999600, -0.2800000000000001400 ) ) ;
-#99 = AXIS2_PLACEMENT_3D ( 'NONE', #261, #81, #289 ) ;
-#100 = CARTESIAN_POINT ( 'NONE',  ( 0.6187184335382425200, -0.6187184335382321900, 17.87867965644033700 ) ) ;
-#101 = VERTEX_POINT ( 'NONE', #222 ) ;
-#102 = ORIENTED_EDGE ( 'NONE', *, *, #105, .T. ) ;
-#103 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 20.00000000000000400 ) ) ;
-#104 = COLOUR_RGB ( '',0.5294117647058823600, 0.5490196078431373000, 0.5490196078431373000 ) ;
-#105 = EDGE_CURVE ( 'NONE', #216, #120, #2, .T. ) ;
-#106 = ORIENTED_EDGE ( 'NONE', *, *, #127, .F. ) ;
-#107 = AXIS2_PLACEMENT_3D ( 'NONE', #5, #210, #272 ) ;
-#108 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #124, 'distance_accuracy_value', 'NONE');
-#109 = CARTESIAN_POINT ( 'NONE',  ( 0.8750000000000136600, -0.2351659643066043600, 16.99999999999997200 ) ) ;
-#110 = CARTESIAN_POINT ( 'NONE',  ( -0.8750000000000135400, 1.071565949253950700E-016, 0.7500000000000006700 ) ) ;
-#111 = CIRCLE ( 'NONE', #43, 0.8750000000000045500 ) ;
-#112 = ORIENTED_EDGE ( 'NONE', *, *, #333, .T. ) ;
-#113 = CARTESIAN_POINT ( 'NONE',  ( -0.8750000000000137700, 0.2351659643066067500, 16.99999999999997200 ) ) ;
-#114 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#115 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #335, #155 ) ;
-#116 = ADVANCED_FACE ( 'NONE', ( #327 ), #72, .T. ) ;
-#117 = VERTEX_POINT ( 'NONE', #15 ) ;
-#118 = CIRCLE ( 'NONE', #141, 1.500000000000000000 ) ;
-#119 = PLANE ( 'NONE',  #91 ) ;
-#120 = VERTEX_POINT ( 'NONE', #223 ) ;
-#121 = AXIS2_PLACEMENT_3D ( 'NONE', #194, #228, #287 ) ;
-#122 = CARTESIAN_POINT ( 'NONE',  ( 2.670925902060371400E-014, -2.142931743775268300E-014, 18.58030503116426100 ) ) ;
-#123 = CARTESIAN_POINT ( 'NONE',  ( 0.5719714462379615900, -0.5719714462379933400, 18.03895504146974500 ) ) ;
-#124 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#125 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#126 = ORIENTED_EDGE ( 'NONE', *, *, #256, .F. ) ;
-#127 = EDGE_CURVE ( 'NONE', #328, #193, #89, .T. ) ;
-#128 = CARTESIAN_POINT ( 'NONE',  ( 2.667137344314340900E-014, -2.146720301521298800E-014, 17.70530503116425800 ) ) ;
-#129 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #337, #347, #113, #198 ),
- .UNSPECIFIED., .F., .T. ) 
- B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
- ( 2.356194490192344400, 3.141592653589790000 ),
- .UNSPECIFIED. ) 
- CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9492530216741915700, 0.9492530216741915700, 1.000000000000000000 ) ) 
- REPRESENTATION_ITEM ( '' )  );
-#130 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#131 = CIRCLE ( 'NONE', #203, 0.5939696961967285700 ) ;
-#132 = ORIENTED_EDGE ( 'NONE', *, *, #229, .T. ) ;
-#133 = DIRECTION ( 'NONE',  ( 0.2696299255199718400, -0.2696299255199709500, 0.9244454589256141400 ) ) ;
-#134 = LINE ( 'NONE', #275, #60 ) ;
-#135 = CARTESIAN_POINT ( 'NONE',  ( 2.667137344314340900E-014, -2.146720301521298800E-014, 17.70530503116425800 ) ) ;
-#136 = ORIENTED_EDGE ( 'NONE', *, *, #298, .F. ) ;
-#137 = CARTESIAN_POINT ( 'NONE',  ( 0.7850058816037170900, -0.4524309854727568400, 17.30855126307299600 ) ) ;
-#138 = CIRCLE ( 'NONE', #178, 0.8750000000000135400 ) ;
-#139 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ;
-#140 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#141 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #196, #21 ) ;
-#142 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#143 = LINE ( 'NONE', #92, #151 ) ;
-#144 = VERTEX_POINT ( 'NONE', #100 ) ;
-#145 = VERTEX_POINT ( 'NONE', #45 ) ;
-#146 = EDGE_CURVE ( 'NONE', #193, #145, #231, .T. ) ;
-#147 = FACE_OUTER_BOUND ( 'NONE', #86, .T. ) ;
-#148 = AXIS2_PLACEMENT_3D ( 'NONE', #330, #150, #360 ) ;
-#149 = CLOSED_SHELL ( 'NONE', ( #27, #62, #116, #352, #175, #267, #87, #204, #326, #386, #299, #238 ) ) ;
-#150 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#151 = VECTOR ( 'NONE', #177, 1000.000000000000000 ) ;
-#152 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#153 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ;
-#154 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#155 = DIRECTION ( 'NONE',  ( 0.7071067811865449100, 0.7071067811865502400, 0.0000000000000000000 ) ) ;
-#156 = CIRCLE ( 'NONE', #174, 0.5939696961966779400 ) ;
-#157 = CARTESIAN_POINT ( 'NONE',  ( 0.7850058816037134300, 0.4524309854727652800, 17.30855126307297500 ) ) ;
-#158 = ORIENTED_EDGE ( 'NONE', *, *, #50, .F. ) ;
-#159 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -5.493600000000003400, 1.164800000000004100 ) ) ;
-#160 = PRODUCT ( '20mm_Nail_Rounded', '20mm_Nail_Rounded', '', ( #182 ) ) ;
-#161 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#162 = AXIS2_PLACEMENT_3D ( 'NONE', #103, #47, #315 ) ;
-#163 = VERTEX_POINT ( 'NONE', #312 ) ;
-#164 = DIRECTION ( 'NONE',  ( 0.7071067811865446900, 0.7071067811865503500, 0.0000000000000000000 ) ) ;
-#165 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#166 = EDGE_CURVE ( 'NONE', #163, #250, #3, .T. ) ;
-#167 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #240 ) ;
-#168 = FACE_OUTER_BOUND ( 'NONE', #34, .T. ) ;
-#169 = ORIENTED_EDGE ( 'NONE', *, *, #229, .F. ) ;
-#170 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#171 = CARTESIAN_POINT ( 'NONE',  ( -0.6187184335382387400, -0.6187184335382407400, 17.87867965644032300 ) ) ;
-#172 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#173 = ORIENTED_EDGE ( 'NONE', *, *, #333, .F. ) ;
-#174 = AXIS2_PLACEMENT_3D ( 'NONE', #281, #98, #310 ) ;
-#175 = ADVANCED_FACE ( 'NONE', ( #147 ), #254, .F. ) ;
-#176 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #171, #26, #266, #311 ),
- .UNSPECIFIED., .F., .T. ) 
- B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
- ( 2.356194490192346200, 3.926990816987246700 ),
- .UNSPECIFIED. ) 
- CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.8047378541243640500, 0.8047378541243640500, 1.000000000000000000 ) ) 
- REPRESENTATION_ITEM ( '' )  );
-#177 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#178 = AXIS2_PLACEMENT_3D ( 'NONE', #343, #165, #375 ) ;
-#179 = ORIENTED_EDGE ( 'NONE', *, *, #207, .F. ) ;
-#180 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#181 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #213 ) ;
-#182 = PRODUCT_CONTEXT ( 'NONE', #213, 'mechanical' ) ;
-#183 = ORIENTED_EDGE ( 'NONE', *, *, #278, .T. ) ;
-#184 = EDGE_CURVE ( 'NONE', #250, #145, #82, .T. ) ;
-#185 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.2800000000000001400, 0.9599999999999999600 ) ) ;
-#186 = CIRCLE ( 'NONE', #233, 1.500000000000000200 ) ;
-#187 = CARTESIAN_POINT ( 'NONE',  ( -5.094213649851649700, 5.094213649851631900, 2.534124629080133100 ) ) ;
-#188 = ORIENTED_EDGE ( 'NONE', *, *, #105, .F. ) ;
-#189 = CARTESIAN_POINT ( 'NONE',  ( -0.6168140076230470600, -2.362079761236599400E-014, 17.88520911672098600 ) ) ;
-#190 = DIRECTION ( 'NONE',  ( -0.2800000000000001400, 0.0000000000000000000, -0.9599999999999999600 ) ) ;
-#191 = EDGE_CURVE ( 'NONE', #372, #145, #63, .T. ) ;
-#192 = CARTESIAN_POINT ( 'NONE',  ( 0.5719714462379872400, 0.5719714462379677000, 18.03895504146974500 ) ) ;
-#193 = VERTEX_POINT ( 'NONE', #78 ) ;
-#194 = CARTESIAN_POINT ( 'NONE',  ( 2.667137344314340900E-014, -2.146720301521298800E-014, 17.70530503116425800 ) ) ;
-#195 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #160 ) ) ;
-#196 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#197 = DIRECTION ( 'NONE',  ( -0.9599999999999999600, -1.005546625586822200E-014, -0.2800000000000000800 ) ) ;
-#198 = CARTESIAN_POINT ( 'NONE',  ( -0.8750000000000135400, 1.071565949253950700E-016, 16.99999999999996100 ) ) ;
-#199 = SURFACE_SIDE_STYLE ('',( #339 ) ) ;
-#200 = SPHERICAL_SURFACE ( 'NONE', #121, 0.8750000000000043300 ) ;
-#201 = EDGE_LOOP ( 'NONE', ( #286, #320, #112, #136 ) ) ;
-#202 = PLANE ( 'NONE',  #208 ) ;
-#203 = AXIS2_PLACEMENT_3D ( 'NONE', #51, #258, #80 ) ;
-#204 = ADVANCED_FACE ( 'NONE', ( #367 ), #55, .T. ) ;
-#205 = SHAPE_DEFINITION_REPRESENTATION ( #167, #40 ) ;
-#206 = EDGE_LOOP ( 'NONE', ( #49, #90, #265, #61, #158, #274 ) ) ;
-#207 = EDGE_CURVE ( 'NONE', #144, #8, #291, .T. ) ;
-#208 = AXIS2_PLACEMENT_3D ( 'NONE', #114, #172, #382 ) ;
-#209 = VECTOR ( 'NONE', #79, 1000.000000000000100 ) ;
-#210 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#211 = VERTEX_POINT ( 'NONE', #48 ) ;
-#212 = PLANE ( 'NONE',  #31 ) ;
-#213 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#214 = FACE_OUTER_BOUND ( 'NONE', #37, .T. ) ;
-#215 = EDGE_CURVE ( 'NONE', #297, #101, #138, .T. ) ;
-#216 = VERTEX_POINT ( 'NONE', #192 ) ;
-#217 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #9 ) ;
-#218 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #160, .NOT_KNOWN. ) ;
-#219 = CARTESIAN_POINT ( 'NONE',  ( 0.8750000000000135400, 0.0000000000000000000, 16.99999999999996400 ) ) ;
-#220 = VECTOR ( 'NONE', #19, 1000.000000000000100 ) ;
-#221 = ORIENTED_EDGE ( 'NONE', *, *, #316, .F. ) ;
-#222 = CARTESIAN_POINT ( 'NONE',  ( 0.8750000000000135400, 0.0000000000000000000, 0.7500000000000006700 ) ) ;
-#223 = CARTESIAN_POINT ( 'NONE',  ( 0.6187184335382381900, 0.6187184335382461800, 17.87867965644030500 ) ) ;
-#224 = AXIS2_PLACEMENT_3D ( 'NONE', #341, #370, #190 ) ;
-#225 = DIRECTION ( 'NONE',  ( -0.2800000000000008600, 0.0000000000000000000, -0.9599999999999997400 ) ) ;
-#226 = CARTESIAN_POINT ( 'NONE',  ( -5.094213649851618600, -5.094213649851638200, 2.534124629080115800 ) ) ;
-#227 = ORIENTED_EDGE ( 'NONE', *, *, #248, .F. ) ;
-#228 = DIRECTION ( 'NONE',  ( 0.7071067811865502400, -0.7071067811865449100, 0.0000000000000000000 ) ) ;
-#229 = EDGE_CURVE ( 'NONE', #8, #216, #131, .T. ) ;
-#230 = CARTESIAN_POINT ( 'NONE',  ( -0.6187184335382387400, -0.6187184335382407400, 17.87867965644032300 ) ) ;
-#231 = CIRCLE ( 'NONE', #324, 0.5939696961966709500 ) ;
-#232 = FILL_AREA_STYLE_COLOUR ( '', #273 ) ;
-#233 = AXIS2_PLACEMENT_3D ( 'NONE', #32, #243, #65 ) ;
-#234 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#235 = CARTESIAN_POINT ( 'NONE',  ( 2.667137344314340900E-014, -2.146720301521298800E-014, 17.70530503116425800 ) ) ;
-#236 = FACE_OUTER_BOUND ( 'NONE', #314, .T. ) ;
-#237 = ORIENTED_EDGE ( 'NONE', *, *, #239, .T. ) ;
-#238 = ADVANCED_FACE ( 'NONE', ( #280 ), #200, .T. ) ;
-#239 = EDGE_CURVE ( 'NONE', #117, #268, #118, .T. ) ;
-#240 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #218, #1 ) ;
-#241 = FACE_OUTER_BOUND ( 'NONE', #69, .T. ) ;
-#242 = ORIENTED_EDGE ( 'NONE', *, *, #50, .T. ) ;
-#243 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#244 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.2800000000000001400, -0.9599999999999999600 ) ) ;
-#245 = AXIS2_PLACEMENT_3D ( 'NONE', #135, #342, #164 ) ;
-#246 = EDGE_LOOP ( 'NONE', ( #4, #253 ) ) ;
-#247 = FILL_AREA_STYLE ('',( #36 ) ) ;
-#248 = EDGE_CURVE ( 'NONE', #145, #8, #357, .T. ) ;
-#249 = CARTESIAN_POINT ( 'NONE',  ( -0.6187184335382390800, 0.6187184335382365200, 17.87867965644033300 ) ) ;
-#250 = VERTEX_POINT ( 'NONE', #230 ) ;
-#251 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 20.00000000000000400 ) ) ;
-#252 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #234, 'distance_accuracy_value', 'NONE');
-#253 = ORIENTED_EDGE ( 'NONE', *, *, #215, .F. ) ;
-#254 = PLANE ( 'NONE',  #224 ) ;
-#255 = ORIENTED_EDGE ( 'NONE', *, *, #248, .T. ) ;
-#256 = EDGE_CURVE ( 'NONE', #268, #117, #349, .T. ) ;
-#257 = CARTESIAN_POINT ( 'NONE',  ( 5.094213649851680800, -5.094213649851626600, 2.534124629080151300 ) ) ;
-#258 = DIRECTION ( 'NONE',  ( -0.9600000000000000800, -1.005546625586822300E-014, -0.2800000000000001400 ) ) ;
-#259 = SPHERICAL_SURFACE ( 'NONE', #115, 0.8750000000000043300 ) ;
-#260 = AXIS2_PLACEMENT_3D ( 'NONE', #180, #154, #363 ) ;
-#261 = CARTESIAN_POINT ( 'NONE',  ( 2.667137344314340900E-014, -0.6168140076230510500, 17.88520911672097200 ) ) ;
-#262 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#263 = PRESENTATION_STYLE_ASSIGNMENT (( #23 ) ) ;
-#264 = DIRECTION ( 'NONE',  ( -0.7071067811865449100, -0.7071067811865502400, 0.0000000000000000000 ) ) ;
-#265 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ;
-#266 = CARTESIAN_POINT ( 'NONE',  ( 0.2562815664617787400, -0.9811553006147022400, 16.63603896932102800 ) ) ;
-#267 = ADVANCED_FACE ( 'NONE', ( #42 ), #345, .F. ) ;
-#268 = VERTEX_POINT ( 'NONE', #52 ) ;
-#269 = EDGE_CURVE ( 'NONE', #144, #282, #321, .T. ) ;
-#270 = MANIFOLD_SOLID_BREP ( 'Cut-Revolve2', #149 ) ;
-#271 = AXIS2_PLACEMENT_3D ( 'NONE', #323, #142, #351 ) ;
-#272 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#273 = COLOUR_RGB ( '',0.5294117647058823600, 0.5490196078431373000, 0.5490196078431373000 ) ;
-#274 = ORIENTED_EDGE ( 'NONE', *, *, #70, .F. ) ;
-#275 = CARTESIAN_POINT ( 'NONE',  ( -0.8750000000000135400, 1.071565949253950700E-016, 20.00000000000000400 ) ) ;
-#276 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#277 = SURFACE_STYLE_USAGE ( .BOTH. , #68 ) ;
-#278 = EDGE_CURVE ( 'NONE', #268, #380, #85, .T. ) ;
-#279 = ORIENTED_EDGE ( 'NONE', *, *, #269, .F. ) ;
-#280 = FACE_OUTER_BOUND ( 'NONE', #293, .T. ) ;
-#281 = CARTESIAN_POINT ( 'NONE',  ( 2.667137344314340900E-014, 0.6168140076230481700, 17.88520911672098600 ) ) ;
-#282 = VERTEX_POINT ( 'NONE', #381 ) ;
-#283 = CARTESIAN_POINT ( 'NONE',  ( -0.8750000000000132100, -0.2351659643066085200, 16.99999999999995700 ) ) ;
-#284 = CARTESIAN_POINT ( 'NONE',  ( -0.6187184335382387400, -0.6187184335382407400, 17.87867965644032300 ) ) ;
-#285 = SURFACE_STYLE_FILL_AREA ( #247 ) ;
-#286 = ORIENTED_EDGE ( 'NONE', *, *, #278, .F. ) ;
-#287 = DIRECTION ( 'NONE',  ( 0.7071067811865449100, 0.7071067811865502400, 0.0000000000000000000 ) ) ;
-#288 = EDGE_CURVE ( 'NONE', #372, #216, #111, .T. ) ;
-#289 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.2800000000000005800, 0.9599999999999999600 ) ) ;
-#290 = FILL_AREA_STYLE ('',( #232 ) ) ;
-#291 = LINE ( 'NONE', #257, #209 ) ;
-#292 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #252 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #234, #56, #262 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#293 = EDGE_LOOP ( 'NONE', ( #13, #340, #296, #308 ) ) ;
-#294 = CARTESIAN_POINT ( 'NONE',  ( -1.500000000000000000, 1.836970198721029900E-016, 20.00000000000000400 ) ) ;
-#295 = CIRCLE ( 'NONE', #148, 0.8750000000000135400 ) ;
-#296 = ORIENTED_EDGE ( 'NONE', *, *, #88, .T. ) ;
-#297 = VERTEX_POINT ( 'NONE', #110 ) ;
-#298 = EDGE_CURVE ( 'NONE', #380, #211, #313, .T. ) ;
-#299 = ADVANCED_FACE ( 'NONE', ( #236 ), #202, .T. ) ;
-#300 = EDGE_LOOP ( 'NONE', ( #303, #102, #57, #350 ) ) ;
-#301 = CARTESIAN_POINT ( 'NONE',  ( -0.6187184335382390800, 0.6187184335382365200, 17.87867965644033300 ) ) ;
-#302 = AXIS2_PLACEMENT_3D ( 'NONE', #41, #161, #75 ) ;
-#303 = ORIENTED_EDGE ( 'NONE', *, *, #88, .F. ) ;
-#304 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#305 = EDGE_CURVE ( 'NONE', #250, #144, #176, .T. ) ;
-#306 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#307 = VECTOR ( 'NONE', #338, 1000.000000000000200 ) ;
-#308 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ;
-#309 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #348 ), #292 ) ;
-#310 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.2799999999999993600, -0.9600000000000001900 ) ) ;
-#311 = CARTESIAN_POINT ( 'NONE',  ( 0.6187184335382425200, -0.6187184335382321900, 17.87867965644033700 ) ) ;
-#312 = CARTESIAN_POINT ( 'NONE',  ( -0.8750000000000135400, 1.071565949253950700E-016, 16.99999999999996100 ) ) ;
-#313 = CIRCLE ( 'NONE', #271, 1.500000000000000200 ) ;
-#314 = EDGE_LOOP ( 'NONE', ( #331, #126 ) ) ;
-#315 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#316 = EDGE_CURVE ( 'NONE', #211, #380, #186, .T. ) ;
-#317 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #356 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #95, #304, #125 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#318 = CYLINDRICAL_SURFACE ( 'NONE', #383, 1.500000000000000000 ) ;
-#319 = CARTESIAN_POINT ( 'NONE',  ( 5.493600000000004300, 5.754240564920595900E-014, 1.164800000000000500 ) ) ;
-#320 = ORIENTED_EDGE ( 'NONE', *, *, #256, .T. ) ;
-#321 =( BOUNDED_CURVE ( )  B_SPLINE_CURVE ( 3, ( #54, #137, #109, #322 ),
- .UNSPECIFIED., .F., .T. ) 
- B_SPLINE_CURVE_WITH_KNOTS ( ( 4, 4 ),
- ( 2.356194490192344400, 3.141592653589783300 ),
- .UNSPECIFIED. ) 
- CURVE ( )  GEOMETRIC_REPRESENTATION_ITEM ( )  RATIONAL_B_SPLINE_CURVE ( ( 1.000000000000000000, 0.9492530216741923400, 0.9492530216741923400, 1.000000000000000000 ) ) 
- REPRESENTATION_ITEM ( '' )  );
-#322 = CARTESIAN_POINT ( 'NONE',  ( 0.8750000000000135400, 0.0000000000000000000, 16.99999999999996400 ) ) ;
-#323 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.7500000000000006700 ) ) ;
-#324 = AXIS2_PLACEMENT_3D ( 'NONE', #189, #16, #225 ) ;
-#325 = EDGE_LOOP ( 'NONE', ( #30, #64, #17, #279, #74, #25 ) ) ;
-#326 = ADVANCED_FACE ( 'NONE', ( #384 ), #67, .T. ) ;
-#327 = FACE_OUTER_BOUND ( 'NONE', #206, .T. ) ;
-#328 = VERTEX_POINT ( 'NONE', #301 ) ;
-#329 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #348 ) ) ;
-#330 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.7500000000000006700 ) ) ;
-#331 = ORIENTED_EDGE ( 'NONE', *, *, #239, .F. ) ;
-#332 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#333 = EDGE_CURVE ( 'NONE', #117, #211, #143, .T. ) ;
-#334 = EDGE_LOOP ( 'NONE', ( #169, #179, #364, #242, #188 ) ) ;
-#335 = DIRECTION ( 'NONE',  ( 0.7071067811865502400, -0.7071067811865449100, 0.0000000000000000000 ) ) ;
-#336 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #377 ), #317 ) ;
-#337 = CARTESIAN_POINT ( 'NONE',  ( -0.6187184335382390800, 0.6187184335382365200, 17.87867965644033300 ) ) ;
-#338 = DIRECTION ( 'NONE',  ( 0.2696299255199682800, 0.2696299255199712300, -0.9244454589256151400 ) ) ;
-#339 = SURFACE_STYLE_FILL_AREA ( #290 ) ;
-#340 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ;
-#341 = CARTESIAN_POINT ( 'NONE',  ( -5.493600000000003400, -1.918080188306865100E-014, 1.164800000000004100 ) ) ;
-#342 = DIRECTION ( 'NONE',  ( 0.7071067811865504600, -0.7071067811865448000, 0.0000000000000000000 ) ) ;
-#343 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.7500000000000006700 ) ) ;
-#344 = ORIENTED_EDGE ( 'NONE', *, *, #298, .T. ) ;
-#345 = PLANE ( 'NONE',  #24 ) ;
-#346 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#347 = CARTESIAN_POINT ( 'NONE',  ( -0.7850058816037155400, 0.4524309854727610600, 17.30855126307298500 ) ) ;
-#348 = STYLED_ITEM ( 'NONE', ( #263 ), #270 ) ;
-#349 = CIRCLE ( 'NONE', #84, 1.500000000000000000 ) ;
-#350 = ORIENTED_EDGE ( 'NONE', *, *, #127, .T. ) ;
-#351 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#352 = ADVANCED_FACE ( 'NONE', ( #371 ), #119, .F. ) ;
-#353 = EDGE_CURVE ( 'NONE', #101, #297, #295, .T. ) ;
-#354 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ;
-#355 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #377 ) ) ;
-#356 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #95, 'distance_accuracy_value', 'NONE');
-#357 = CIRCLE ( 'NONE', #99, 0.5939696961967214600 ) ;
-#358 = ORIENTED_EDGE ( 'NONE', *, *, #305, .T. ) ;
-#359 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.493600000000003400, 1.164800000000004100 ) ) ;
-#360 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#361 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #368, #185 ) ;
-#362 = FACE_BOUND ( 'NONE', #246, .T. ) ;
-#363 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#364 = ORIENTED_EDGE ( 'NONE', *, *, #269, .T. ) ;
-#365 = CARTESIAN_POINT ( 'NONE',  ( 0.2562815664617700300, 0.9811553006147029100, 16.63603896932102400 ) ) ;
-#366 = CARTESIAN_POINT ( 'NONE',  ( 0.6187184335382381900, 0.6187184335382461800, 17.87867965644030500 ) ) ;
-#367 = FACE_OUTER_BOUND ( 'NONE', #325, .T. ) ;
-#368 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.9599999999999999600, -0.2800000000000001400 ) ) ;
-#369 = EDGE_LOOP ( 'NONE', ( #385, #83, #255, #132 ) ) ;
-#370 = DIRECTION ( 'NONE',  ( 0.9599999999999999600, 3.351822085289407900E-015, -0.2800000000000001400 ) ) ;
-#371 = FACE_OUTER_BOUND ( 'NONE', #300, .T. ) ;
-#372 = VERTEX_POINT ( 'NONE', #122 ) ;
-#373 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ;
-#374 = EDGE_CURVE ( 'NONE', #297, #163, #134, .T. ) ;
-#375 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#376 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#377 = STYLED_ITEM ( 'NONE', ( #29 ), #40 ) ;
-#378 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#379 = VECTOR ( 'NONE', #133, 1000.000000000000100 ) ;
-#380 = VERTEX_POINT ( 'NONE', #93 ) ;
-#381 = CARTESIAN_POINT ( 'NONE',  ( 0.8750000000000135400, 0.0000000000000000000, 16.99999999999996400 ) ) ;
-#382 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#383 = AXIS2_PLACEMENT_3D ( 'NONE', #251, #306, #39 ) ;
-#384 = FACE_OUTER_BOUND ( 'NONE', #201, .T. ) ;
-#385 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ;
-#386 = ADVANCED_FACE ( 'NONE', ( #214, #362 ), #212, .T. ) ;
-ENDSEC;
-END-ISO-10303-21;

Firearms/The_Holdout_v3.0-RollaTroll/STEP/Barrel_Block_Left.step

@@ -1,527 +0,0 @@
-ISO-10303-21;
-HEADER;
-FILE_DESCRIPTION (( 'STEP AP214' ),
-    '1' );
-FILE_NAME ('Barrel_Block_Left.step',
-    '2015-01-13T04:29:55',
-    ( '' ),
-    ( '' ),
-    'SwSTEP 2.0',
-    'SolidWorks 2015',
-    '' );
-FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
-ENDSEC;
-
-DATA;
-#1 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507900, 1.004479931793461800E-016 ) ) ;
-#2 = CARTESIAN_POINT ( 'NONE',  ( -7.044371463217736100, 11.78766011922070900, 0.0000000000000000000 ) ) ;
-#3 = PRODUCT ( 'Barrel_Block_Left', 'Barrel_Block_Left', '', ( #336 ) ) ;
-#4 = CARTESIAN_POINT ( 'NONE',  ( -19.99999999999999300, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#5 = EDGE_LOOP ( 'NONE', ( #218, #143, #125, #229 ) ) ;
-#6 = ADVANCED_FACE ( 'NONE', ( #339, #394, #122 ), #433, .T. ) ;
-#7 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#8 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#9 = EDGE_LOOP ( 'NONE', ( #163, #282, #231 ) ) ;
-#10 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507900, -0.5351775614532554600 ) ) ;
-#11 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, 14.32624687269461100, -1.373535626435547800 ) ) ;
-#12 = CARTESIAN_POINT ( 'NONE',  ( -5.255003467970166900, 9.484445025865474200, 0.0000000000000000000 ) ) ;
-#13 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, 14.24434144452607000, -2.501800215485988400 ) ) ;
-#14 = CARTESIAN_POINT ( 'NONE',  ( -2.485853675784990300, -0.7342744335124071800, 0.0000000000000000000 ) ) ;
-#15 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999991100, 14.14030150361920200, -3.633740062766398700 ) ) ;
-#16 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#17 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -15.00000000000000200 ) ) ;
-#18 = EDGE_LOOP ( 'NONE', ( #245, #205, #112 ) ) ;
-#19 = CARTESIAN_POINT ( 'NONE',  ( -7.350195556271475400, 13.93329928466604500, -6.006639020025526900 ) ) ;
-#20 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, -2.500000000000000000, -7.500000000000003600 ) ) ;
-#21 = CARTESIAN_POINT ( 'NONE',  ( -9.606022243458660600, -14.36140661634507300, -1.010080855333619100 ) ) ;
-#22 = CARTESIAN_POINT ( 'NONE',  ( -3.659129793255770500, -9.400607248009196200, -17.54483218541413700 ) ) ;
-#23 = CARTESIAN_POINT ( 'NONE',  ( -6.629965489838230800, 13.43003689892986700, -7.994521026827209600 ) ) ;
-#24 = LINE ( 'NONE', #445, #121 ) ;
-#25 = CARTESIAN_POINT ( 'NONE',  ( -2.955338139065812900, -0.4191720619316117200, -19.76675090149364100 ) ) ;
-#26 = ORIENTED_EDGE ( 'NONE', *, *, #384, .T. ) ;
-#27 = CARTESIAN_POINT ( 'NONE',  ( -3.618973619863904200, 6.244277246612858400, 0.0000000000000000000 ) ) ;
-#28 = CARTESIAN_POINT ( 'NONE',  ( -6.037785222903577800, -10.60120663497850700, 0.0000000000000000000 ) ) ;
-#29 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 13.93329928466604700, -6.006639020025526000 ) ) ;
-#30 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#31 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.06075602578432400, -4.466646048030519900 ) ) ;
-#32 = FACE_OUTER_BOUND ( 'NONE', #346, .T. ) ;
-#33 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.06075602578432400, -4.466646048030519900 ) ) ;
-#34 = VERTEX_POINT ( 'NONE', #397 ) ;
-#35 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.01661399115316800, -4.999991106951009500 ) ) ;
-#36 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#37 = VECTOR ( 'NONE', #86, 1000.000000000000000 ) ;
-#38 = CARTESIAN_POINT ( 'NONE',  ( -6.568869020386567400, 11.22330358046604500, 0.0000000000000000000 ) ) ;
-#39 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.01661325511459600, -4.999999999999363200 ) ) ;
-#40 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -2.500000000000002200 ) ) ;
-#41 = VECTOR ( 'NONE', #59, 1000.000000000000000 ) ;
-#42 = VECTOR ( 'NONE', #84, 1000.000000000000000 ) ;
-#43 = EDGE_LOOP ( 'NONE', ( #170, #138, #26 ) ) ;
-#44 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #39, #58, #35, #33, #15, #13, #11, #10, #8 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 2, 1, 1, 1, 4 ),
- ( 0.0000000000000000000, 2.084275591311564300E-006, 0.2500015632066932600, 0.5000010421377961700, 0.7500005210688980300, 1.000000000000000000 ),
- .UNSPECIFIED. ) ;
-#45 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, -14.36140661634507900, 0.0000000000000000000 ) ) ;
-#46 = CARTESIAN_POINT ( 'NONE',  ( -5.027558658897199000, -9.118887794102935400, 0.0000000000000000000 ) ) ;
-#47 = VERTEX_POINT ( 'NONE', #395 ) ;
-#48 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, -9.400607248009196200, -17.54483218541413700 ) ) ;
-#49 = ADVANCED_FACE ( 'NONE', ( #106 ), #390, .F. ) ;
-#50 = CARTESIAN_POINT ( 'NONE',  ( -2.500951169586460600, 1.033125172270318300, 0.0000000000000000000 ) ) ;
-#51 = CARTESIAN_POINT ( 'NONE',  ( -6.532657219782332300, -13.52591792972261500, -9.163511897872822900 ) ) ;
-#52 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507300, -0.0000000000000000000 ) ) ;
-#53 = CARTESIAN_POINT ( 'NONE',  ( -7.888488959476537100, 14.06075602578432200, -4.466646048030519900 ) ) ;
-#54 = CARTESIAN_POINT ( 'NONE',  ( -9.806740173237933800, 14.36140661634507900, -0.5351775614532554600 ) ) ;
-#55 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#56 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#57 = ADVANCED_FACE ( 'NONE', ( #123 ), #427, .T. ) ;
-#58 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.01661362313552300, -4.999995553475310200 ) ) ;
-#59 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#60 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, -1.010080855333619100 ) ) ;
-#61 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999973400, 7.907923154741387100, -15.41002021558290900 ) ) ;
-#62 = CARTESIAN_POINT ( 'NONE',  ( -8.043802905335020600, 12.80867806743072100, 0.0000000000000000000 ) ) ;
-#63 = DIRECTION ( 'NONE',  ( -0.7071067811865474600, 0.0000000000000000000, -0.7071067811865475700 ) ) ;
-#64 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#65 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -2.500000000000002200 ) ) ;
-#66 = VERTEX_POINT ( 'NONE', #385 ) ;
-#67 = DIRECTION ( 'NONE',  ( -0.7071067811865474600, 0.0000000000000000000, -0.7071067811865475700 ) ) ;
-#68 = DIRECTION ( 'NONE',  ( 0.7071067811865474600, 0.0000000000000000000, 0.7071067811865475700 ) ) ;
-#69 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#70 = VERTEX_POINT ( 'NONE', #347 ) ;
-#71 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, 14.32624687269461100, -1.373535626435547800 ) ) ;
-#72 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, -12.66891487482327400, -12.17065535444770900 ) ) ;
-#73 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000003400, 5.384540385383181700, -17.28762551760766500 ) ) ;
-#74 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #108 ) ;
-#75 = CARTESIAN_POINT ( 'NONE',  ( -2.986855704919213500, -4.223434811203355300, -13.80276572851172300 ) ) ;
-#76 = CARTESIAN_POINT ( 'NONE',  ( -2.694262772900170200, 2.795479454816248900, 0.0000000000000000000 ) ) ;
-#77 = ADVANCED_FACE ( 'NONE', ( #118 ), #344, .F. ) ;
-#78 = CARTESIAN_POINT ( 'NONE',  ( -4.349127176337417700, 7.898802276860550400, 0.0000000000000000000 ) ) ;
-#79 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#80 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 3, ( 
- ( #45, #362, #52, #288 ),
- ( #332, #151, #21, #111 ),
- ( #289, #110, #187, #413 ),
- ( #147, #369, #460, #221 ),
- ( #28, #450, #51, #250 ),
- ( #46, #284, #363, #103 ),
- ( #406, #142, #182, #323 ),
- ( #216, #452, #22, #48 ),
- ( #253, #75, #285, #365 ),
- ( #327, #105, #145, #454 ),
- ( #410, #183, #25, #219 ),
- ( #50, #254, #287, #328 ),
- ( #76, #184, #109, #367 ),
- ( #411, #146, #457, #220 ),
- ( #27, #255, #258, #330 ),
- ( #78, #214, #370, #181 ),
- ( #144, #418, #23, #456 ),
- ( #188, #463, #19, #29 ),
- ( #366, #81, #53, #31 ),
- ( #2, #264, #114, #190 ),
- ( #291, #152, #419, #226 ),
- ( #335, #375, #326, #71 ),
- ( #116, #293, #54, #261 ),
- ( #30, #225, #1, #189 ) ),
- .UNSPECIFIED., .F., .F., .F.,
- ( 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 1, 1, 1, 4 ),
- ( 4, 4 ),
- ( 0.0000000000000000000, 0.05518987863826376600, 0.1103797572765275300, 0.1655696359147912900, 0.2207595145530550400, 0.2759493931913187800, 0.3311392718295825800, 0.3863291504678464400, 0.4415190291061100700, 0.4967089077443738700, 0.5518987863826375600, 0.6070886650209014200, 0.6622785436591650500, 0.7174684222974289100, 0.7726583009356928800, 0.8278481795739565100, 0.8830380582122202600, 0.9122785436591651600, 0.9415190291061101800, 0.9707595145530550900, 1.000000000000000000 ),
- ( 0.0000000000000000000, 1.000000000000000000 ),
- .UNSPECIFIED. ) ;
-#81 = CARTESIAN_POINT ( 'NONE',  ( -6.568869020386567400, 11.22330358046604500, -4.223022081046914300 ) ) ;
-#82 = FACE_OUTER_BOUND ( 'NONE', #159, .T. ) ;
-#83 = ORIENTED_EDGE ( 'NONE', *, *, #292, .F. ) ;
-#84 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#85 = ADVANCED_FACE ( 'NONE', ( #107 ), #306, .F. ) ;
-#86 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#87 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, 2.500000000000000000, -15.00000000000000400 ) ) ;
-#88 = LINE ( 'NONE', #128, #266 ) ;
-#89 = ORIENTED_EDGE ( 'NONE', *, *, #279, .F. ) ;
-#90 = ORIENTED_EDGE ( 'NONE', *, *, #376, .T. ) ;
-#91 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -7.500000000000001800 ) ) ;
-#92 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -2.500000000000002200 ) ) ;
-#93 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 12.01224674696709500, -10.73686135990815600 ) ) ;
-#94 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, -2.500000000000000000, -15.00000000000000400 ) ) ;
-#95 = LINE ( 'NONE', #443, #447 ) ;
-#96 = ORIENTED_EDGE ( 'NONE', *, *, #359, .T. ) ;
-#97 = CARTESIAN_POINT ( 'NONE',  ( -9.730527822135835300, 14.17377027607359900, 0.0000000000000000000 ) ) ;
-#98 = CARTESIAN_POINT ( 'NONE',  ( -8.519418234429265300, -13.25012688627097500, 0.0000000000000000000 ) ) ;
-#99 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#100 = PLANE ( 'NONE',  #352 ) ;
-#101 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#102 = FILL_AREA_STYLE ('',( #215 ) ) ;
-#103 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, -12.66891487482327400, -12.17065535444770900 ) ) ;
-#104 = VECTOR ( 'NONE', #211, 1000.000000000000000 ) ;
-#105 = CARTESIAN_POINT ( 'NONE',  ( -2.648108963545871200, -2.491525661635703300, -14.24141051748020800 ) ) ;
-#106 = FACE_OUTER_BOUND ( 'NONE', #18, .T. ) ;
-#107 = FACE_OUTER_BOUND ( 'NONE', #9, .T. ) ;
-#108 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#109 = CARTESIAN_POINT ( 'NONE',  ( -3.688870160540348700, 5.384540385383181700, -17.28762551760766500 ) ) ;
-#110 = CARTESIAN_POINT ( 'NONE',  ( -8.519418234429265300, -13.25012688627097500, -2.363866539248013600 ) ) ;
-#111 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, -1.010080855333619100 ) ) ;
-#112 = ORIENTED_EDGE ( 'NONE', *, *, #348, .F. ) ;
-#113 = SURFACE_STYLE_FILL_AREA ( #203 ) ;
-#114 = CARTESIAN_POINT ( 'NONE',  ( -8.256709725254427900, 14.14030150361920200, -3.633740062766398300 ) ) ;
-#115 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #7, #60, #175, #405, #283, #72, #403, #267, #303, #179, #322, #361, #73, #61, #349, #93, #132, #308, #392 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4 ),
- ( 0.0000000000000000000, 0.06250001725445844500, 0.1250000345089168900, 0.1875000517633753400, 0.2500000690178337800, 0.3125000862722922000, 0.3750001035267506700, 0.4375001207812092600, 0.5000001380356675600, 0.5625001552901260900, 0.6250001725445844000, 0.6875001897990429300, 0.7500002070535012300, 0.8125002243079598700, 0.8750002415624185100, 0.9375002588168768200, 1.000000000000000000 ),
- .UNSPECIFIED. ) ;
-#116 = CARTESIAN_POINT ( 'NONE',  ( -9.730527822135835300, 14.17377027607359900, 0.0000000000000000000 ) ) ;
-#117 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#118 = FACE_OUTER_BOUND ( 'NONE', #130, .T. ) ;
-#119 = PRESENTATION_STYLE_ASSIGNMENT (( #201 ) ) ;
-#120 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#121 = VECTOR ( 'NONE', #139, 1000.000000000000000 ) ;
-#122 = FACE_BOUND ( 'NONE', #5, .T. ) ;
-#123 = FACE_OUTER_BOUND ( 'NONE', #262, .T. ) ;
-#124 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, 2.500000000000000000, -7.500000000000003600 ) ) ;
-#125 = ORIENTED_EDGE ( 'NONE', *, *, #260, .F. ) ;
-#126 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -7.500000000000001800 ) ) ;
-#127 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #372, 'distance_accuracy_value', 'NONE');
-#128 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -2.500000000000002200 ) ) ;
-#129 = ORIENTED_EDGE ( 'NONE', *, *, #260, .T. ) ;
-#130 = EDGE_LOOP ( 'NONE', ( #185, #89, #257, #213 ) ) ;
-#131 = ORIENTED_EDGE ( 'NONE', *, *, #259, .F. ) ;
-#132 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 13.43003481140393300, -7.994525064594401300 ) ) ;
-#133 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -10.00000000000000200 ) ) ;
-#134 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -15.00000000000000200 ) ) ;
-#135 = CARTESIAN_POINT ( 'NONE',  ( -6.037785222903577800, -10.60120663497850700, 0.0000000000000000000 ) ) ;
-#136 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -7.500000000000001800 ) ) ;
-#137 = ORIENTED_EDGE ( 'NONE', *, *, #292, .T. ) ;
-#138 = ORIENTED_EDGE ( 'NONE', *, *, #321, .T. ) ;
-#139 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#140 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#141 = VERTEX_POINT ( 'NONE', #301 ) ;
-#142 = CARTESIAN_POINT ( 'NONE',  ( -4.180029151776555100, -7.551938076883921300, -11.03559269798046900 ) ) ;
-#143 = ORIENTED_EDGE ( 'NONE', *, *, #248, .F. ) ;
-#144 = CARTESIAN_POINT ( 'NONE',  ( -5.255003467970166900, 9.484445025865474200, 0.0000000000000000000 ) ) ;
-#145 = CARTESIAN_POINT ( 'NONE',  ( -2.879294741259905300, -3.598561143592014800, -20.04470413810369300 ) ) ;
-#146 = CARTESIAN_POINT ( 'NONE',  ( -3.066649813676023400, 4.537594713229169400, -11.47877261063374900 ) ) ;
-#147 = CARTESIAN_POINT ( 'NONE',  ( -7.203981022009625000, -11.98343839915354500, 0.0000000000000000000 ) ) ;
-#148 = ORIENTED_EDGE ( 'NONE', *, *, #408, .F. ) ;
-#149 = ORIENTED_EDGE ( 'NONE', *, *, #236, .F. ) ;
-#150 = VERTEX_POINT ( 'NONE', #273 ) ;
-#151 = CARTESIAN_POINT ( 'NONE',  ( -9.491385437060706900, -14.00725289273946600, -0.7879555130826712000 ) ) ;
-#152 = CARTESIAN_POINT ( 'NONE',  ( -8.043802905335020600, 12.80867806743072300, -2.319990515011485200 ) ) ;
-#153 = ORIENTED_EDGE ( 'NONE', *, *, #387, .F. ) ;
-#154 = ORIENTED_EDGE ( 'NONE', *, *, #271, .T. ) ;
-#155 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#156 = VERTEX_POINT ( 'NONE', #277 ) ;
-#157 = ADVANCED_FACE ( 'NONE', ( #82 ), #309, .T. ) ;
-#158 = ORIENTED_EDGE ( 'NONE', *, *, #300, .F. ) ;
-#159 = EDGE_LOOP ( 'NONE', ( #223, #222, #239 ) ) ;
-#160 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#161 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#162 = CARTESIAN_POINT ( 'NONE',  ( -19.99999999999999300, -2.500000000000000000, 0.0000000000000000000 ) ) ;
-#163 = ORIENTED_EDGE ( 'NONE', *, *, #359, .F. ) ;
-#164 = VERTEX_POINT ( 'NONE', #241 ) ;
-#165 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 3.469446951953614200E-016 ) ) ;
-#166 = CARTESIAN_POINT ( 'NONE',  ( -3.066649813676023400, 4.537594713229169400, 0.0000000000000000000 ) ) ;
-#167 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 3.469446951953614200E-016 ) ) ;
-#168 = CARTESIAN_POINT ( 'NONE',  ( -2.986855704919213500, -4.223434811203355300, 0.0000000000000000000 ) ) ;
-#169 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -7.500000000000001800 ) ) ;
-#170 = ORIENTED_EDGE ( 'NONE', *, *, #325, .T. ) ;
-#171 = CARTESIAN_POINT ( 'NONE',  ( -4.180029151776555100, -7.551938076883922200, 0.0000000000000000000 ) ) ;
-#172 = DIRECTION ( 'NONE',  ( -3.469446951953614200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#173 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, 2.500000000000000000, -15.00000000000000400 ) ) ;
-#174 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#175 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, -14.31145569866868800, -3.040712781137856700 ) ) ;
-#176 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#177 = ORIENTED_EDGE ( 'NONE', *, *, #296, .T. ) ;
-#178 = ORIENTED_EDGE ( 'NONE', *, *, #325, .F. ) ;
-#179 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000900, -3.598561143592014400, -20.04470413810369300 ) ) ;
-#180 = DIRECTION ( 'NONE',  ( -0.7071067811865474600, 0.0000000000000000000, -0.7071067811865475700 ) ) ;
-#181 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 12.01224674696709500, -10.73686135990815600 ) ) ;
-#182 = CARTESIAN_POINT ( 'NONE',  ( -4.482203651009753800, -11.34663053348573800, -15.03000525751591900 ) ) ;
-#183 = CARTESIAN_POINT ( 'NONE',  ( -2.485853675784990300, -0.7342744335124070700, -14.08932372186838000 ) ) ;
-#184 = CARTESIAN_POINT ( 'NONE',  ( -2.694262772900170200, 2.795479454816248900, -12.62225967891937400 ) ) ;
-#185 = ORIENTED_EDGE ( 'NONE', *, *, #434, .F. ) ;
-#186 = EDGE_LOOP ( 'NONE', ( #217, #148, #90, #228 ) ) ;
-#187 = CARTESIAN_POINT ( 'NONE',  ( -8.818066730375997900, -14.31145569866868800, -3.040712781137856700 ) ) ;
-#188 = CARTESIAN_POINT ( 'NONE',  ( -5.974664809080560500, 10.48446881896906600, 0.0000000000000000000 ) ) ;
-#189 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507900, 1.004479931793461800E-016 ) ) ;
-#190 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999991100, 14.14030150361920200, -3.633740062766398700 ) ) ;
-#191 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #174 ) ;
-#192 = ORIENTED_EDGE ( 'NONE', *, *, #321, .F. ) ;
-#193 = ORIENTED_EDGE ( 'NONE', *, *, #417, .F. ) ;
-#194 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#195 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#196 = ADVANCED_FACE ( 'NONE', ( #270 ), #244, .F. ) ;
-#197 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#198 = ORIENTED_EDGE ( 'NONE', *, *, #296, .F. ) ;
-#199 = ORIENTED_EDGE ( 'NONE', *, *, #251, .F. ) ;
-#200 = MANIFOLD_SOLID_BREP ( '<Barrel_Block_Right>-<Sketch-Pattern2>', #340 ) ;
-#201 = SURFACE_STYLE_USAGE ( .BOTH. , #202 ) ;
-#202 = SURFACE_SIDE_STYLE ('',( #113 ) ) ;
-#203 = FILL_AREA_STYLE ('',( #207 ) ) ;
-#204 = VECTOR ( 'NONE', #56, 1000.000000000000000 ) ;
-#205 = ORIENTED_EDGE ( 'NONE', *, *, #227, .F. ) ;
-#206 = CARTESIAN_POINT ( 'NONE',  ( -4.349127176337417700, 7.898802276860550400, 0.0000000000000000000 ) ) ;
-#207 = FILL_AREA_STYLE_COLOUR ( '', #176 ) ;
-#208 = VERTEX_POINT ( 'NONE', #210 ) ;
-#209 = CARTESIAN_POINT ( 'NONE',  ( -2.694262772900170200, 2.795479454816248900, 0.0000000000000000000 ) ) ;
-#210 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.01661325511459600, -4.999999999999363200 ) ) ;
-#211 = DIRECTION ( 'NONE',  ( -0.7071067811865474600, 0.0000000000000000000, -0.7071067811865475700 ) ) ;
-#212 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 3.469446951953614200E-016 ) ) ;
-#213 = ORIENTED_EDGE ( 'NONE', *, *, #251, .T. ) ;
-#214 = CARTESIAN_POINT ( 'NONE',  ( -4.349127176337417700, 7.898802276860550400, -8.527230531968040600 ) ) ;
-#215 = FILL_AREA_STYLE_COLOUR ( '', #414 ) ;
-#216 = CARTESIAN_POINT ( 'NONE',  ( -3.498645300723333100, -5.915179682768411800, 0.0000000000000000000 ) ) ;
-#217 = ORIENTED_EDGE ( 'NONE', *, *, #384, .F. ) ;
-#218 = ORIENTED_EDGE ( 'NONE', *, *, #279, .T. ) ;
-#219 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -0.4191720619316117200, -19.76675090149364100 ) ) ;
-#220 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999973400, 7.907923154741387100, -15.41002021558290900 ) ) ;
-#221 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999980500, -14.04476163078866700, -6.105195306969648100 ) ) ;
-#222 = ORIENTED_EDGE ( 'NONE', *, *, #434, .T. ) ;
-#223 = ORIENTED_EDGE ( 'NONE', *, *, #248, .T. ) ;
-#224 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#225 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#226 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, 14.24434144452607000, -2.501800215485988400 ) ) ;
-#227 = EDGE_CURVE ( 'NONE', #156, #240, #421, .T. ) ;
-#228 = ORIENTED_EDGE ( 'NONE', *, *, #259, .T. ) ;
-#229 = ORIENTED_EDGE ( 'NONE', *, *, #281, .T. ) ;
-#230 = PLANE ( 'NONE',  #364 ) ;
-#231 = ORIENTED_EDGE ( 'NONE', *, *, #271, .F. ) ;
-#232 = ADVANCED_FACE ( 'NONE', ( #378 ), #230, .T. ) ;
-#233 = ORIENTED_EDGE ( 'NONE', *, *, #300, .T. ) ;
-#234 = EDGE_LOOP ( 'NONE', ( #233, #177, #137 ) ) ;
-#235 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -3.469446951953614200E-016 ) ) ;
-#236 = EDGE_CURVE ( 'NONE', #337, #402, #360, .T. ) ;
-#237 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #174, 'design' ) ;
-#238 = DIRECTION ( 'NONE',  ( -3.469446951953614200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#239 = ORIENTED_EDGE ( 'NONE', *, *, #236, .T. ) ;
-#240 = VERTEX_POINT ( 'NONE', #126 ) ;
-#241 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -10.00000000000000200 ) ) ;
-#242 = CARTESIAN_POINT ( 'NONE',  ( -5.974664809080560500, 10.48446881896906600, 0.0000000000000000000 ) ) ;
-#243 = CARTESIAN_POINT ( 'NONE',  ( -2.648108963545871200, -2.491525661635703300, 0.0000000000000000000 ) ) ;
-#244 = PLANE ( 'NONE',  #391 ) ;
-#245 = ORIENTED_EDGE ( 'NONE', *, *, #281, .F. ) ;
-#246 = PLANE ( 'NONE',  #343 ) ;
-#247 = SURFACE_SIDE_STYLE ('',( #428 ) ) ;
-#248 = EDGE_CURVE ( 'NONE', #402, #66, #88, .T. ) ;
-#249 = ORIENTED_EDGE ( 'NONE', *, *, #227, .T. ) ;
-#250 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000700, -13.52591792972261500, -9.163511897872822900 ) ) ;
-#251 = EDGE_CURVE ( 'NONE', #156, #337, #334, .T. ) ;
-#252 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#253 = CARTESIAN_POINT ( 'NONE',  ( -2.986855704919213500, -4.223434811203355300, 0.0000000000000000000 ) ) ;
-#254 = CARTESIAN_POINT ( 'NONE',  ( -2.500951169586460600, 1.033125172270318300, -13.51300436296815900 ) ) ;
-#255 = CARTESIAN_POINT ( 'NONE',  ( -3.618973619863904200, 6.244277246612858400, -10.11469714168134500 ) ) ;
-#256 = VERTEX_POINT ( 'NONE', #94 ) ;
-#257 = ORIENTED_EDGE ( 'NONE', *, *, #348, .T. ) ;
-#258 = CARTESIAN_POINT ( 'NONE',  ( -4.942651429159338000, 10.13617004994218200, -13.21544825709536900 ) ) ;
-#259 = EDGE_CURVE ( 'NONE', #47, #34, #297, .T. ) ;
-#260 = EDGE_CURVE ( 'NONE', #240, #402, #324, .T. ) ;
-#261 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507900, -0.5351775614532554600 ) ) ;
-#262 = EDGE_LOOP ( 'NONE', ( #158, #416 ) ) ;
-#263 = ORIENTED_EDGE ( 'NONE', *, *, #408, .T. ) ;
-#264 = CARTESIAN_POINT ( 'NONE',  ( -7.044371463217734300, 11.78766011922070900, -3.486580549491125900 ) ) ;
-#265 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #252, 'distance_accuracy_value', 'NONE');
-#266 = VECTOR ( 'NONE', #120, 1000.000000000000000 ) ;
-#267 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, -9.400607248009196200, -17.54483218541413700 ) ) ;
-#268 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#269 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#270 = FACE_OUTER_BOUND ( 'NONE', #186, .T. ) ;
-#271 = EDGE_CURVE ( 'NONE', #164, #150, #315, .T. ) ;
-#272 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -15.00000000000000200 ) ) ;
-#273 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, 2.500000000000000000, -15.00000000000000400 ) ) ;
-#274 = CARTESIAN_POINT ( 'NONE',  ( -7.044371463217736100, 11.78766011922070900, 0.0000000000000000000 ) ) ;
-#275 = CARTESIAN_POINT ( 'NONE',  ( -19.99999999999999300, -2.500000000000000000, 7.500000000000000000 ) ) ;
-#276 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, -2.500000000000000000, -15.00000000000000400 ) ) ;
-#277 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, 2.500000000000000000, -7.500000000000003600 ) ) ;
-#278 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, -2.500000000000000000, -7.500000000000003600 ) ) ;
-#279 = EDGE_CURVE ( 'NONE', #333, #66, #302, .T. ) ;
-#280 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -7.500000000000001800 ) ) ;
-#281 = EDGE_CURVE ( 'NONE', #240, #333, #353, .T. ) ;
-#282 = ORIENTED_EDGE ( 'NONE', *, *, #376, .F. ) ;
-#283 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000700, -13.52591792972261500, -9.163511897872822900 ) ) ;
-#284 = CARTESIAN_POINT ( 'NONE',  ( -5.027558658897199000, -9.118887794102935400, -9.077190764789003600 ) ) ;
-#285 = CARTESIAN_POINT ( 'NONE',  ( -3.098617135744122100, -6.733313068079224800, -19.33453710525504100 ) ) ;
-#286 = VECTOR ( 'NONE', #63, 1000.000000000000000 ) ;
-#287 = CARTESIAN_POINT ( 'NONE',  ( -3.243497818515892000, 2.598821974433776800, -18.78067262640343300 ) ) ;
-#288 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#289 = CARTESIAN_POINT ( 'NONE',  ( -8.519418234429265300, -13.25012688627097500, 0.0000000000000000000 ) ) ;
-#290 = VECTOR ( 'NONE', #212, 1000.000000000000000 ) ;
-#291 = CARTESIAN_POINT ( 'NONE',  ( -8.043802905335020600, 12.80867806743072100, 0.0000000000000000000 ) ) ;
-#292 = EDGE_CURVE ( 'NONE', #208, #432, #44, .T. ) ;
-#293 = CARTESIAN_POINT ( 'NONE',  ( -9.730527822135835300, 14.17377027607359900, -0.3865196535241238200 ) ) ;
-#294 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #305 ) ;
-#295 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#296 = EDGE_CURVE ( 'NONE', #70, #208, #115, .T. ) ;
-#297 = LINE ( 'NONE', #134, #37 ) ;
-#298 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #3 ) ) ;
-#299 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #3, .NOT_KNOWN. ) ;
-#300 = EDGE_CURVE ( 'NONE', #432, #70, #389, .T. ) ;
-#301 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -10.00000000000000200 ) ) ;
-#302 = LINE ( 'NONE', #92, #41 ) ;
-#303 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999982200, -6.733313068079225700, -19.33453710525504100 ) ) ;
-#304 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#305 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #299, #237 ) ;
-#306 = PLANE ( 'NONE',  #412 ) ;
-#307 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #224, #420 ) ;
-#308 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 13.93329706168340500, -6.006647800778162100 ) ) ;
-#309 = PLANE ( 'NONE',  #400 ) ;
-#310 = CARTESIAN_POINT ( 'NONE',  ( -9.137164515499819100, 13.74070922685317000, 0.0000000000000000000 ) ) ;
-#311 = CARTESIAN_POINT ( 'NONE',  ( -19.99999999999999300, 2.500000000000000000, 0.0000000000000000000 ) ) ;
-#312 = CARTESIAN_POINT ( 'NONE',  ( -9.491385437060705100, -14.00725289273946600, 0.0000000000000000000 ) ) ;
-#313 = DIRECTION ( 'NONE',  ( 0.7071067811865474600, 0.0000000000000000000, 0.7071067811865475700 ) ) ;
-#314 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -15.00000000000000200 ) ) ;
-#315 = LINE ( 'NONE', #87, #286 ) ;
-#316 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #265 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #252, #117, #155 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#317 = DIRECTION ( 'NONE',  ( 0.7071067811865475700, 0.0000000000000000000, -0.7071067811865474600 ) ) ;
-#318 = EDGE_LOOP ( 'NONE', ( #401, #178, #131, #96 ) ) ;
-#319 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#320 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #345 ), #316 ) ;
-#321 = EDGE_CURVE ( 'NONE', #141, #256, #377, .T. ) ;
-#322 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -0.4191720619316117200, -19.76675090149364100 ) ) ;
-#323 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, -11.34663053348573800, -15.03000525751592100 ) ) ;
-#324 = LINE ( 'NONE', #91, #42 ) ;
-#325 = EDGE_CURVE ( 'NONE', #34, #141, #415, .T. ) ;
-#326 = CARTESIAN_POINT ( 'NONE',  ( -9.420220519713801400, 14.32624687269461100, -1.373535626435547800 ) ) ;
-#327 = CARTESIAN_POINT ( 'NONE',  ( -2.648108963545871200, -2.491525661635703300, 0.0000000000000000000 ) ) ;
-#328 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999966200, 2.598821974433776800, -18.78067262640343300 ) ) ;
-#329 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #345 ) ) ;
-#330 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, 10.13617004994218200, -13.21544825709536900 ) ) ;
-#331 = VECTOR ( 'NONE', #99, 1000.000000000000000 ) ;
-#332 = CARTESIAN_POINT ( 'NONE',  ( -9.491385437060705100, -14.00725289273946600, 0.0000000000000000000 ) ) ;
-#333 = VERTEX_POINT ( 'NONE', #40 ) ;
-#334 = LINE ( 'NONE', #124, #331 ) ;
-#335 = CARTESIAN_POINT ( 'NONE',  ( -9.137164515499819100, 13.74070922685317000, 0.0000000000000000000 ) ) ;
-#336 = PRODUCT_CONTEXT ( 'NONE', #108, 'mechanical' ) ;
-#337 = VERTEX_POINT ( 'NONE', #278 ) ;
-#338 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #127 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #372, #55, #295 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#339 = FACE_BOUND ( 'NONE', #318, .T. ) ;
-#340 = CLOSED_SHELL ( 'NONE', ( #6, #57, #461, #368, #196, #85, #232, #77, #383, #49, #157 ) ) ;
-#341 = DIRECTION ( 'NONE',  ( 0.7071067811865475700, 0.0000000000000000000, -0.7071067811865474600 ) ) ;
-#342 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#343 = AXIS2_PLACEMENT_3D ( 'NONE', #357, #172, #398 ) ;
-#344 = PLANE ( 'NONE',  #425 ) ;
-#345 = STYLED_ITEM ( 'NONE', ( #407 ), #451 ) ;
-#346 = EDGE_LOOP ( 'NONE', ( #192, #193, #154, #263 ) ) ;
-#347 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#348 = EDGE_CURVE ( 'NONE', #333, #156, #459, .T. ) ;
-#349 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, 10.13617004994218200, -13.21544825709536900 ) ) ;
-#350 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, 2.500000000000000000, -7.500000000000003600 ) ) ;
-#351 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#352 = AXIS2_PLACEMENT_3D ( 'NONE', #173, #317, #68 ) ;
-#353 = LINE ( 'NONE', #65, #204 ) ;
-#354 = CARTESIAN_POINT ( 'NONE',  ( -7.203981022009625000, -11.98343839915354500, 0.0000000000000000000 ) ) ;
-#355 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#356 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, 2.500000000000000000, -15.00000000000000400 ) ) ;
-#357 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -7.500000000000001800 ) ) ;
-#358 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 3.469446951953614200E-016 ) ) ;
-#359 = EDGE_CURVE ( 'NONE', #47, #164, #24, .T. ) ;
-#360 = LINE ( 'NONE', #136, #426 ) ;
-#361 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999966200, 2.598821974433776800, -18.78067262640343300 ) ) ;
-#362 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, -14.36140661634507900, 0.0000000000000000000 ) ) ;
-#363 = CARTESIAN_POINT ( 'NONE',  ( -5.461404617605487600, -12.66891487482327400, -12.17065535444770900 ) ) ;
-#364 = AXIS2_PLACEMENT_3D ( 'NONE', #162, #161, #160 ) ;
-#365 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999982200, -6.733313068079225700, -19.33453710525504100 ) ) ;
-#366 = CARTESIAN_POINT ( 'NONE',  ( -6.568869020386567400, 11.22330358046604500, 0.0000000000000000000 ) ) ;
-#367 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000003400, 5.384540385383181700, -17.28762551760766500 ) ) ;
-#368 = ADVANCED_FACE ( 'NONE', ( #32 ), #100, .F. ) ;
-#369 = CARTESIAN_POINT ( 'NONE',  ( -7.203981022009625000, -11.98343839915354700, -4.682202785401217100 ) ) ;
-#370 = CARTESIAN_POINT ( 'NONE',  ( -5.736384734015973500, 12.01224674696709500, -10.73686135990815400 ) ) ;
-#371 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #197, 'distance_accuracy_value', 'NONE');
-#372 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#373 = VECTOR ( 'NONE', #67, 1000.000000000000000 ) ;
-#374 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #371 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #197, #195, #194 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#375 = CARTESIAN_POINT ( 'NONE',  ( -9.137164515499820900, 13.74070922685317000, -1.159558960572371500 ) ) ;
-#376 = EDGE_CURVE ( 'NONE', #150, #47, #465, .T. ) ;
-#377 = LINE ( 'NONE', #276, #104 ) ;
-#378 = FACE_OUTER_BOUND ( 'NONE', #43, .T. ) ;
-#379 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #399 ), #374 ) ;
-#380 = EDGE_LOOP ( 'NONE', ( #198, #153, #83 ) ) ;
-#381 = CARTESIAN_POINT ( 'NONE',  ( -14.99999999999999600, 2.500000000000000000, -7.500000000000003600 ) ) ;
-#382 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #399 ) ) ;
-#383 = ADVANCED_FACE ( 'NONE', ( #455 ), #246, .F. ) ;
-#384 = EDGE_CURVE ( 'NONE', #256, #34, #449, .T. ) ;
-#385 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -2.500000000000002200 ) ) ;
-#386 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#387 = EDGE_CURVE ( 'NONE', #432, #70, #95, .T. ) ;
-#388 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#389 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #36, #97, #310, #62, #274, #38, #242, #12, #206, #435, #166, #209, #437, #14, #243, #168, #441, #171, #396, #135, #354, #98, #312, #64 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 1, 1, 1, 2, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 4 ),
- ( 0.0000000000000000000, 0.02924048544694490800, 0.05848097089388981700, 0.08772145634083483600, 0.1169619417877797400, 0.1721518204260434900, 0.2273416990643071200, 0.2825315777025710900, 0.3377214563408349500, 0.3929113349790985800, 0.4481012136173624400, 0.5032910922556261800, 0.5584809708938899300, 0.6136708495321535600, 0.6688607281704174200, 0.7240506068086811600, 0.7792404854469450200, 0.8344303640852086500, 0.8896202427234725100, 0.9448101213617362500, 1.000000000000000000 ),
- .UNSPECIFIED. ) ;
-#390 = PLANE ( 'NONE',  #453 ) ;
-#391 = AXIS2_PLACEMENT_3D ( 'NONE', #272, #238, #235 ) ;
-#392 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.01661325511459600, -4.999999999999363200 ) ) ;
-#393 = VECTOR ( 'NONE', #16, 1000.000000000000000 ) ;
-#394 = FACE_OUTER_BOUND ( 'NONE', #380, .T. ) ;
-#395 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -15.00000000000000200 ) ) ;
-#396 = CARTESIAN_POINT ( 'NONE',  ( -5.027558658897199000, -9.118887794102935400, 0.0000000000000000000 ) ) ;
-#397 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -15.00000000000000200 ) ) ;
-#398 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -3.469446951953614200E-016 ) ) ;
-#399 = STYLED_ITEM ( 'NONE', ( #119 ), #200 ) ;
-#400 = AXIS2_PLACEMENT_3D ( 'NONE', #275, #269, #268 ) ;
-#401 = ORIENTED_EDGE ( 'NONE', *, *, #417, .T. ) ;
-#402 = VERTEX_POINT ( 'NONE', #280 ) ;
-#403 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, -11.34663053348573800, -15.03000525751592100 ) ) ;
-#404 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -10.00000000000000200 ) ) ;
-#405 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999980500, -14.04476163078866700, -6.105195306969648100 ) ) ;
-#406 = CARTESIAN_POINT ( 'NONE',  ( -4.180029151776555100, -7.551938076883922200, 0.0000000000000000000 ) ) ;
-#407 = PRESENTATION_STYLE_ASSIGNMENT (( #409 ) ) ;
-#408 = EDGE_CURVE ( 'NONE', #150, #256, #442, .T. ) ;
-#409 = SURFACE_STYLE_USAGE ( .BOTH. , #247 ) ;
-#410 = CARTESIAN_POINT ( 'NONE',  ( -2.485853675784990300, -0.7342744335124071800, 0.0000000000000000000 ) ) ;
-#411 = CARTESIAN_POINT ( 'NONE',  ( -3.066649813676023400, 4.537594713229169400, 0.0000000000000000000 ) ) ;
-#412 = AXIS2_PLACEMENT_3D ( 'NONE', #311, #342, #304 ) ;
-#413 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, -14.31145569866868800, -3.040712781137856700 ) ) ;
-#414 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#415 = LINE ( 'NONE', #133, #393 ) ;
-#416 = ORIENTED_EDGE ( 'NONE', *, *, #387, .T. ) ;
-#417 = EDGE_CURVE ( 'NONE', #164, #141, #446, .T. ) ;
-#418 = CARTESIAN_POINT ( 'NONE',  ( -5.255003467970166900, 9.484445025865474200, -6.740069020323531400 ) ) ;
-#419 = CARTESIAN_POINT ( 'NONE',  ( -8.840004742494262000, 14.24434144452607000, -2.501800215485988400 ) ) ;
-#420 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#421 = LINE ( 'NONE', #169, #444 ) ;
-#422 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -0.5590332894140682700, -19.67152741431887400 ) ) ;
-#423 = SHAPE_DEFINITION_REPRESENTATION ( #294, #451 ) ;
-#424 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#425 = AXIS2_PLACEMENT_3D ( 'NONE', #381, #341, #313 ) ;
-#426 = VECTOR ( 'NONE', #165, 1000.000000000000000 ) ;
-#427 = PLANE ( 'NONE',  #438 ) ;
-#428 = SURFACE_STYLE_FILL_AREA ( #102 ) ;
-#429 = FACE_OUTER_BOUND ( 'NONE', #234, .T. ) ;
-#430 = CARTESIAN_POINT ( 'NONE',  ( -19.99999999999999300, 2.500000000000000000, 7.500000000000000000 ) ) ;
-#431 = VECTOR ( 'NONE', #180, 1000.000000000000000 ) ;
-#432 = VERTEX_POINT ( 'NONE', #69 ) ;
-#433 = PLANE ( 'NONE',  #464 ) ;
-#434 = EDGE_CURVE ( 'NONE', #66, #337, #439, .T. ) ;
-#435 = CARTESIAN_POINT ( 'NONE',  ( -3.618973619863904200, 6.244277246612858400, 0.0000000000000000000 ) ) ;
-#436 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#437 = CARTESIAN_POINT ( 'NONE',  ( -2.500951169586460600, 1.033125172270318300, 0.0000000000000000000 ) ) ;
-#438 = AXIS2_PLACEMENT_3D ( 'NONE', #4, #355, #351 ) ;
-#439 = LINE ( 'NONE', #20, #431 ) ;
-#440 = VECTOR ( 'NONE', #140, 1000.000000000000000 ) ;
-#441 = CARTESIAN_POINT ( 'NONE',  ( -3.498645300723333100, -5.915179682768411800, 0.0000000000000000000 ) ) ;
-#442 = LINE ( 'NONE', #356, #440 ) ;
-#443 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#444 = VECTOR ( 'NONE', #167, 1000.000000000000000 ) ;
-#445 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -10.00000000000000200 ) ) ;
-#446 = LINE ( 'NONE', #404, #448 ) ;
-#447 = VECTOR ( 'NONE', #319, 1000.000000000000000 ) ;
-#448 = VECTOR ( 'NONE', #101, 1000.000000000000000 ) ;
-#449 = LINE ( 'NONE', #314, #458 ) ;
-#450 = CARTESIAN_POINT ( 'NONE',  ( -6.037785222903577800, -10.60120663497850700, -6.934685560435353200 ) ) ;
-#451 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel_Block_Left', ( #200, #307 ), #338 ) ;
-#452 = CARTESIAN_POINT ( 'NONE',  ( -3.498645300723333100, -5.915179682768411800, -12.68174041348847700 ) ) ;
-#453 = AXIS2_PLACEMENT_3D ( 'NONE', #430, #388, #386 ) ;
-#454 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000900, -3.598561143592014400, -20.04470413810369300 ) ) ;
-#455 = FACE_OUTER_BOUND ( 'NONE', #462, .T. ) ;
-#456 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 13.43003689892986700, -7.994521026827209600 ) ) ;
-#457 = CARTESIAN_POINT ( 'NONE',  ( -4.260613694683098800, 7.907923154741387100, -15.41002021558290900 ) ) ;
-#458 = VECTOR ( 'NONE', #358, 1000.000000000000000 ) ;
-#459 = LINE ( 'NONE', #350, #373 ) ;
-#460 = CARTESIAN_POINT ( 'NONE',  ( -7.658898607299371400, -14.04476163078866700, -6.105195306969648100 ) ) ;
-#461 = ADVANCED_FACE ( 'NONE', ( #429 ), #80, .F. ) ;
-#462 = EDGE_LOOP ( 'NONE', ( #149, #199, #249, #129 ) ) ;
-#463 = CARTESIAN_POINT ( 'NONE',  ( -5.974664809080560500, 10.48446881896906500, -5.299608887457036000 ) ) ;
-#464 = AXIS2_PLACEMENT_3D ( 'NONE', #422, #424, #436 ) ;
-#465 = LINE ( 'NONE', #17, #290 ) ;
-ENDSEC;
-END-ISO-10303-21;

Firearms/The_Holdout_v3.0-RollaTroll/STEP/Barrel_Block_Right.step

@@ -1,628 +0,0 @@
-ISO-10303-21;
-HEADER;
-FILE_DESCRIPTION (( 'STEP AP214' ),
-    '1' );
-FILE_NAME ('Barrel_Block_Right.step',
-    '2015-01-13T04:29:57',
-    ( '' ),
-    ( '' ),
-    'SwSTEP 2.0',
-    'SolidWorks 2015',
-    '' );
-FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
-ENDSEC;
-
-DATA;
-#1 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#2 = VERTEX_POINT ( 'NONE', #13 ) ;
-#3 = SURFACE_STYLE_USAGE ( .BOTH. , #6 ) ;
-#4 = EDGE_LOOP ( 'NONE', ( #175, #517, #124 ) ) ;
-#5 = EDGE_LOOP ( 'NONE', ( #546, #119, #355, #299 ) ) ;
-#6 = SURFACE_SIDE_STYLE ('',( #322 ) ) ;
-#7 = FILL_AREA_STYLE ('',( #10 ) ) ;
-#8 = EDGE_LOOP ( 'NONE', ( #19, #227, #91 ) ) ;
-#9 = EDGE_LOOP ( 'NONE', ( #30, #200 ) ) ;
-#10 = FILL_AREA_STYLE_COLOUR ( '', #343 ) ;
-#11 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#12 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#13 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -10.00000000000000200 ) ) ;
-#14 = ORIENTED_EDGE ( 'NONE', *, *, #475, .T. ) ;
-#15 = EDGE_LOOP ( 'NONE', ( #281, #14, #400 ) ) ;
-#16 = PLANE ( 'NONE',  #417 ) ;
-#17 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999992900, -14.36138818896588600, -1.020941139502031400 ) ) ;
-#18 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -6.014794968298577500, -19.40162399067382600 ) ) ;
-#19 = ORIENTED_EDGE ( 'NONE', *, *, #487, .T. ) ;
-#20 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507900, 1.004479931793461800E-016 ) ) ;
-#21 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, -10.09204215001076800, -16.57261393135826900 ) ) ;
-#22 = ORIENTED_EDGE ( 'NONE', *, *, #369, .F. ) ;
-#23 = EDGE_CURVE ( 'NONE', #308, #241, #330, .T. ) ;
-#24 = CARTESIAN_POINT ( 'NONE',  ( -17.51414632421500200, -0.7342744335124071800, 0.0000000000000000000 ) ) ;
-#25 = ADVANCED_FACE ( 'NONE', ( #433 ), #16, .T. ) ;
-#26 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -15.00000000000000200 ) ) ;
-#27 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -11.16339992119145000, -15.13799476127804200 ) ) ;
-#28 = CARTESIAN_POINT ( 'NONE',  ( -13.43113097961342600, 11.22330358046604500, 0.0000000000000000000 ) ) ;
-#29 = EDGE_LOOP ( 'NONE', ( #101, #194, #258, #90 ) ) ;
-#30 = ORIENTED_EDGE ( 'NONE', *, *, #501, .T. ) ;
-#31 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -0.5590332894140682700, -19.67152741431887400 ) ) ;
-#32 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -10.00000000000000200 ) ) ;
-#33 = CARTESIAN_POINT ( 'NONE',  ( -11.18193326962399500, -14.31145569866868800, -3.040712781137856700 ) ) ;
-#34 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, -13.26692772801204600, -9.988575405625898200 ) ) ;
-#35 = CARTESIAN_POINT ( 'NONE',  ( -14.53859538239450600, -12.66891487482327400, -12.17065535444770900 ) ) ;
-#36 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 2.500000000000000000, 0.0000000000000000000 ) ) ;
-#37 = PLANE ( 'NONE',  #294 ) ;
-#38 = ORIENTED_EDGE ( 'NONE', *, *, #456, .F. ) ;
-#39 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#40 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000002800, 2.598821974433776800, -18.78067262640343300 ) ) ;
-#41 = CARTESIAN_POINT ( 'NONE',  ( -12.20628945503224100, -12.61868358839202600, -0.0000000000000000000 ) ) ;
-#42 = CARTESIAN_POINT ( 'NONE',  ( -17.30573722709982200, 2.795479454816248900, -12.62225967891937400 ) ) ;
-#43 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #11 ) ;
-#44 = VERTEX_POINT ( 'NONE', #99 ) ;
-#45 = ORIENTED_EDGE ( 'NONE', *, *, #362, .F. ) ;
-#46 = CARTESIAN_POINT ( 'NONE',  ( -15.65087282366257600, 7.898802276860550400, 0.0000000000000000000 ) ) ;
-#47 = CARTESIAN_POINT ( 'NONE',  ( -14.06271243478920300, -10.51007642403747500, 0.0000000000000000000 ) ) ;
-#48 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#49 = EDGE_CURVE ( 'NONE', #308, #223, #455, .T. ) ;
-#50 = ORIENTED_EDGE ( 'NONE', *, *, #476, .T. ) ;
-#51 = CARTESIAN_POINT ( 'NONE',  ( -14.86188959541759900, -9.346064167212361400, -0.0000000000000000000 ) ) ;
-#52 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 6.784022830252436800, -16.22280540079344700 ) ) ;
-#53 = ADVANCED_FACE ( 'NONE', ( #523 ), #165, .F. ) ;
-#54 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, 3.469446951953614200E-016 ) ) ;
-#55 = ORIENTED_EDGE ( 'NONE', *, *, #362, .T. ) ;
-#56 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#57 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#58 = DIRECTION ( 'NONE',  ( 0.7071067811865474600, -0.0000000000000000000, -0.7071067811865475700 ) ) ;
-#59 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#60 = ORIENTED_EDGE ( 'NONE', *, *, #452, .F. ) ;
-#61 = ORIENTED_EDGE ( 'NONE', *, *, #550, .F. ) ;
-#62 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -0.7812760804701173200, -19.71308598949210000 ) ) ;
-#63 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#64 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -10.11355385344178100, -16.54735095965857300 ) ) ;
-#65 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -3.469446951953614200E-016 ) ) ;
-#66 = ADVANCED_FACE ( 'NONE', ( #559 ), #195, .F. ) ;
-#67 = CARTESIAN_POINT ( 'NONE',  ( -10.86283548450017200, 13.74070922685317000, -1.159558960572371500 ) ) ;
-#68 = ORIENTED_EDGE ( 'NONE', *, *, #23, .F. ) ;
-#69 = CARTESIAN_POINT ( 'NONE',  ( -13.37003451016176200, 13.43003689892986700, -7.994521026827209600 ) ) ;
-#70 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -5.257517406304186700, -19.63229806266651100 ) ) ;
-#71 = CARTESIAN_POINT ( 'NONE',  ( -12.95562853678225900, 11.78766011922070900, 0.0000000000000000000 ) ) ;
-#72 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.01661325511459600, -4.999999999999363200 ) ) ;
-#73 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, -14.31145569866868800, -3.040712781137856700 ) ) ;
-#74 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -13.23180146109034400, -10.12078234869098900 ) ) ;
-#75 = ORIENTED_EDGE ( 'NONE', *, *, #23, .T. ) ;
-#76 = CARTESIAN_POINT ( 'NONE',  ( -15.81997084822343800, -7.551938076883922200, 0.0000000000000000000 ) ) ;
-#77 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, 3.469446951953614200E-016 ) ) ;
-#78 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#79 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -7.500000000000001800 ) ) ;
-#80 = CARTESIAN_POINT ( 'NONE',  ( -16.16229451955954500, -6.855787578807297500, 0.0000000000000000000 ) ) ;
-#81 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel_Block_Right', ( #152, #315 ), #278 ) ;
-#82 = ORIENTED_EDGE ( 'NONE', *, *, #518, .F. ) ;
-#83 = CARTESIAN_POINT ( 'NONE',  ( -16.66103463264696300, -5.534853451880656500, -0.0000000000000000000 ) ) ;
-#84 = VERTEX_POINT ( 'NONE', #519 ) ;
-#85 = CARTESIAN_POINT ( 'NONE',  ( -11.74329027474556500, 14.14030150361920200, -3.633740062766398300 ) ) ;
-#86 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.32295296581214200, -2.497419189249354700 ) ) ;
-#87 = CARTESIAN_POINT ( 'NONE',  ( -15.05734857084065600, 10.13617004994218200, -13.21544825709536900 ) ) ;
-#88 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.15451156687657200, -3.473263129053219000 ) ) ;
-#89 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -2.500000000000002200 ) ) ;
-#90 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ;
-#91 = ORIENTED_EDGE ( 'NONE', *, *, #49, .T. ) ;
-#92 = ORIENTED_EDGE ( 'NONE', *, *, #475, .F. ) ;
-#93 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.13806810515785800, -4.913021444070874800 ) ) ;
-#94 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -14.05710344811866000, -5.659987611738681100 ) ) ;
-#95 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 7.742986459457825700, -15.48324467971633900 ) ) ;
-#96 = VERTEX_POINT ( 'NONE', #239 ) ;
-#97 = EDGE_LOOP ( 'NONE', ( #38, #45, #22 ) ) ;
-#98 = ADVANCED_FACE ( 'NONE', ( #423 ), #225, .F. ) ;
-#99 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -15.00000000000000200 ) ) ;
-#100 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -15.00000000000000200 ) ) ;
-#101 = ORIENTED_EDGE ( 'NONE', *, *, #445, .F. ) ;
-#102 = VERTEX_POINT ( 'NONE', #26 ) ;
-#103 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -7.624929632100190700, -18.67526415964760700 ) ) ;
-#104 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999984000, -3.598561143592014400, -20.04470413810369300 ) ) ;
-#105 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -10.35733051138244100, -16.25195899285801100 ) ) ;
-#106 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ;
-#107 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#108 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 1.936099060904369100, -18.94878840751328400 ) ) ;
-#109 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 1.278766252813988000, -19.18712911382017700 ) ) ;
-#110 = CARTESIAN_POINT ( 'NONE',  ( -14.02533519091943300, 10.48446881896906600, 0.0000000000000000000 ) ) ;
-#111 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -4.647162604806224500, -19.76830005342398900 ) ) ;
-#112 = VERTEX_POINT ( 'NONE', #325 ) ;
-#113 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
-#114 = CARTESIAN_POINT ( 'NONE',  ( -12.79601897799036800, -11.98343839915354700, -4.682202785401217100 ) ) ;
-#115 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -13.00089754820749600, -10.96444247863613300 ) ) ;
-#116 = CARTESIAN_POINT ( 'NONE',  ( -15.51779634899024000, -11.34663053348573800, -15.03000525751591900 ) ) ;
-#117 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 13.95304099879572700, -5.766871059367583800 ) ) ;
-#118 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.18791055475958300, -3.108959904244418900 ) ) ;
-#119 = ORIENTED_EDGE ( 'NONE', *, *, #487, .F. ) ;
-#120 = ORIENTED_EDGE ( 'NONE', *, *, #501, .F. ) ;
-#121 = ORIENTED_EDGE ( 'NONE', *, *, #535, .F. ) ;
-#122 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #72, #209, #262, #88, #118, #130, #135, #125, #128, #136, #132, #137, #153, #157, #160, #159, #161, #163, #164, #162, #155, #184, #183, #189, #187 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 2, 1, 1, 1, 1, 1, 1, 2, 2, 1, 1, 1, 1, 1, 2, 2, 4 ),
- ( 0.0000000000000000000, 0.2500000000000121600, 0.3750000000000180400, 0.4375000000000209800, 0.4687500000000225900, 0.4843750000000232600, 0.4921875000000235900, 0.4960937500000235900, 0.4980468750000235400, 0.5000000000000235400, 0.6250000000000179900, 0.6875000000000152100, 0.7187500000000138800, 0.7343750000000131000, 0.7421875000000126600, 0.7460937500000125500, 0.7500000000000123200, 1.000000000000000000 ),
- .UNSPECIFIED. ) ;
-#123 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -3.469446951953614200E-016 ) ) ;
-#124 = ORIENTED_EDGE ( 'NONE', *, *, #565, .T. ) ;
-#125 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.23548909921905000, -2.564250464330553500 ) ) ;
-#126 = B_SPLINE_SURFACE_WITH_KNOTS ( 'NONE', 3, 3, ( 
- ( #251, #441, #389, #434 ),
- ( #178, #481, #208, #548 ),
- ( #282, #244, #33, #73 ),
- ( #326, #114, #381, #149 ),
- ( #436, #180, #484, #210 ),
- ( #551, #246, #35, #285 ),
- ( #76, #328, #116, #384 ),
- ( #151, #438, #182, #489 ),
- ( #553, #248, #212, #543 ),
- ( #473, #173, #427, #104 ),
- ( #24, #540, #323, #341 ),
- ( #337, #127, #393, #40 ),
- ( #156, #42, #253, #129 ),
- ( #219, #502, #186, #396 ),
- ( #443, #158, #87, #295 ),
- ( #46, #255, #344, #398 ),
- ( #131, #430, #69, #276 ),
- ( #110, #319, #146, #374 ),
- ( #28, #242, #331, #243 ),
- ( #71, #291, #85, #468 ),
- ( #236, #536, #203, #171 ),
- ( #471, #67, #363, #233 ),
- ( #201, #273, #532, #270 ),
- ( #366, #279, #20, #316 ) ),
- .UNSPECIFIED., .F., .F., .F.,
- ( 4, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 2, 1, 1, 1, 4 ),
- ( 4, 4 ),
- ( 0.0000000000000000000, 0.05518987863826376600, 0.1103797572765275300, 0.1655696359147912900, 0.2207595145530550400, 0.2759493931913187800, 0.3311392718295825800, 0.3863291504678464400, 0.4415190291061100700, 0.4967089077443738700, 0.5518987863826375600, 0.6070886650209014200, 0.6622785436591650500, 0.7174684222974289100, 0.7726583009356928800, 0.8278481795739565100, 0.8830380582122202600, 0.9122785436591651600, 0.9415190291061101800, 0.9707595145530550900, 1.000000000000000000 ),
- ( 0.0000000000000000000, 1.000000000000000000 ),
- .UNSPECIFIED. ) ;
-#127 = CARTESIAN_POINT ( 'NONE',  ( -17.49904883041353200, 1.033125172270318300, -13.51300436296815900 ) ) ;
-#128 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.23815145754466900, -2.532452515434470400 ) ) ;
-#129 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999960900, 5.384540385383181700, -17.28762551760766500 ) ) ;
-#130 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.21745384368518600, -2.774945788780787100 ) ) ;
-#131 = CARTESIAN_POINT ( 'NONE',  ( -14.74499653202982700, 9.484445025865474200, 0.0000000000000000000 ) ) ;
-#132 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.23999267595538300, -2.510323719685603600 ) ) ;
-#133 = ORIENTED_EDGE ( 'NONE', *, *, #528, .F. ) ;
-#134 = ORIENTED_EDGE ( 'NONE', *, *, #460, .F. ) ;
-#135 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.22986993891350800, -2.630690309418970900 ) ) ;
-#136 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.23944583125069300, -2.516909034398456100 ) ) ;
-#137 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, 14.24035548645104800, -2.505950438134751000 ) ) ;
-#138 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 2.500000000000000000, 7.500000000000000000 ) ) ;
-#139 = ADVANCED_FACE ( 'NONE', ( #439 ), #378, .T. ) ;
-#140 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -2.500000000000000000, 7.500000000000000000 ) ) ;
-#141 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -8.009902068806230300, -18.42454900051283700 ) ) ;
-#142 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 1.661770989268067900, -19.05150086248864100 ) ) ;
-#143 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -7.500000000000001800 ) ) ;
-#144 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 3.108648406156837100, -18.46259330359290400 ) ) ;
-#145 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -13.77351088743287000, -7.729055592714106000 ) ) ;
-#146 = CARTESIAN_POINT ( 'NONE',  ( -12.64980444372851800, 13.93329928466604500, -6.006639020025526900 ) ) ;
-#147 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000200, -14.06041280584598100, -5.631488585563880100 ) ) ;
-#148 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#149 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000001200, -14.04476163078866700, -6.105195306969648100 ) ) ;
-#150 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -12.28095525492869700, -12.94106986943706700 ) ) ;
-#151 = CARTESIAN_POINT ( 'NONE',  ( -16.50135469927666100, -5.915179682768411800, 0.0000000000000000000 ) ) ;
-#152 = MANIFOLD_SOLID_BREP ( 'Sketch-Pattern2', #440 ) ;
-#153 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.24041653044003700, -2.505215313002473500 ) ) ;
-#154 = PLANE ( 'NONE',  #321 ) ;
-#155 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, 14.32632054932797200, -1.263204584880515600 ) ) ;
-#156 = CARTESIAN_POINT ( 'NONE',  ( -17.30573722709982200, 2.795479454816248900, 0.0000000000000000000 ) ) ;
-#157 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.25986047089619800, -2.270385650922369000 ) ) ;
-#158 = CARTESIAN_POINT ( 'NONE',  ( -16.38102638013608800, 6.244277246612858400, -10.11469714168134500 ) ) ;
-#159 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.30804855365323100, -1.586151329483108400 ) ) ;
-#160 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.28499490248706700, -1.940723009522660400 ) ) ;
-#161 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.31800791614718300, -1.416374173195028300 ) ) ;
-#162 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.32571179780447500, -1.274839884609136200 ) ) ;
-#163 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.32259573162187700, -1.333362765983914700 ) ) ;
-#164 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.32479167291615600, -1.292326355111581100 ) ) ;
-#165 = PLANE ( 'NONE',  #411 ) ;
-#166 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#167 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, 3.469446951953614200E-016 ) ) ;
-#168 = ADVANCED_FACE ( 'NONE', ( #555 ), #177, .F. ) ;
-#169 = PLANE ( 'NONE',  #263 ) ;
-#170 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -8.081849473019488500, -18.37690219918975000 ) ) ;
-#171 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, 14.24434144452607000, -2.501800215485988400 ) ) ;
-#172 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#173 = CARTESIAN_POINT ( 'NONE',  ( -17.35189103645412300, -2.491525661635703300, -14.24141051748020800 ) ) ;
-#174 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 8.465977268732238800, -14.84595554786517700 ) ) ;
-#175 = ORIENTED_EDGE ( 'NONE', *, *, #462, .T. ) ;
-#176 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -10.63417579884381100, -15.89449139383891400 ) ) ;
-#177 = PLANE ( 'NONE',  #347 ) ;
-#178 = CARTESIAN_POINT ( 'NONE',  ( -10.50861456293928800, -14.00725289273946600, 0.0000000000000000000 ) ) ;
-#179 = VERTEX_POINT ( 'NONE', #563 ) ;
-#180 = CARTESIAN_POINT ( 'NONE',  ( -13.96221477709641500, -10.60120663497850700, -6.934685560435353200 ) ) ;
-#181 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, -11.94686274666669900, -13.67088045124109800 ) ) ;
-#182 = CARTESIAN_POINT ( 'NONE',  ( -16.34087020674422400, -9.400607248009196200, -17.54483218541413700 ) ) ;
-#183 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.34989070151407900, -0.8074784518659211500 ) ) ;
-#184 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.32656342202548500, -1.258542249095714100 ) ) ;
-#185 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -2.500000000000002200 ) ) ;
-#186 = CARTESIAN_POINT ( 'NONE',  ( -15.73938630531689500, 7.907923154741387100, -15.41002021558290900 ) ) ;
-#187 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#188 = SURFACE_SIDE_STYLE ('',( #544 ) ) ;
-#189 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.36138547254631300, -0.3902775165121152300 ) ) ;
-#190 = ORIENTED_EDGE ( 'NONE', *, *, #446, .F. ) ;
-#191 = ADVANCED_FACE ( 'NONE', ( #509 ), #154, .F. ) ;
-#192 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#193 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -2.500000000000002200 ) ) ;
-#194 = ORIENTED_EDGE ( 'NONE', *, *, #462, .F. ) ;
-#195 = PLANE ( 'NONE',  #386 ) ;
-#196 = ORIENTED_EDGE ( 'NONE', *, *, #550, .T. ) ;
-#197 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, 2.500000000000000000, -15.00000000000000400 ) ) ;
-#198 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, -3.261135500637206700, -19.89686854494315700 ) ) ;
-#199 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -3.206627468746048300, -19.89868090464777600 ) ) ;
-#200 = ORIENTED_EDGE ( 'NONE', *, *, #450, .F. ) ;
-#201 = CARTESIAN_POINT ( 'NONE',  ( -10.26947217786415800, 14.17377027607359900, 0.0000000000000000000 ) ) ;
-#202 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -9.259748113302963500, -17.46888607402142000 ) ) ;
-#203 = CARTESIAN_POINT ( 'NONE',  ( -11.15999525750573100, 14.24434144452607000, -2.501800215485988400 ) ) ;
-#204 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, -2.500000000000000000, -7.500000000000003600 ) ) ;
-#205 = ADVANCED_FACE ( 'NONE', ( #497 ), #126, .T. ) ;
-#206 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#207 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#208 = CARTESIAN_POINT ( 'NONE',  ( -10.39397775654133400, -14.36140661634507300, -1.010080855333619100 ) ) ;
-#209 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.03965356099677700, -4.721677140011538900 ) ) ;
-#210 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999985800, -13.52591792972261500, -9.163511897872822900 ) ) ;
-#211 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -11.86427138025248400, -13.83983608482643000 ) ) ;
-#212 = CARTESIAN_POINT ( 'NONE',  ( -16.90138286425587200, -6.733313068079224800, -19.33453710525504100 ) ) ;
-#213 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 10.72862815164682200, -12.39011146326237700 ) ) ;
-#214 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#215 = DIRECTION ( 'NONE',  ( -0.7071067811865475700, 0.0000000000000000000, -0.7071067811865474600 ) ) ;
-#216 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, 2.500000000000000000, -15.00000000000000400 ) ) ;
-#217 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -7.500000000000001800 ) ) ;
-#218 = ORIENTED_EDGE ( 'NONE', *, *, #518, .T. ) ;
-#219 = CARTESIAN_POINT ( 'NONE',  ( -16.93335018632397000, 4.537594713229169400, 0.0000000000000000000 ) ) ;
-#220 = CARTESIAN_POINT ( 'NONE',  ( -12.20622318635681000, 12.61862524158160800, -0.0000000000000000000 ) ) ;
-#221 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#222 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, -2.500000000000000000, -15.00000000000000400 ) ) ;
-#223 = VERTEX_POINT ( 'NONE', #143 ) ;
-#224 = DIRECTION ( 'NONE',  ( 0.7071067811865474600, -0.0000000000000000000, -0.7071067811865475700 ) ) ;
-#225 = PLANE ( 'NONE',  #376 ) ;
-#226 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
-#227 = ORIENTED_EDGE ( 'NONE', *, *, #452, .T. ) ;
-#228 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #470, 'design' ) ;
-#229 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#230 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#231 = SHAPE_DEFINITION_REPRESENTATION ( #293, #81 ) ;
-#232 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -3.178175099366766800, -19.89951323481467700 ) ) ;
-#233 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, 14.32624687269461100, -1.373535626435547800 ) ) ;
-#234 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -9.756931175226883500, -16.96291436455058800 ) ) ;
-#235 = ADVANCED_FACE ( 'NONE', ( #492, #483, #498 ), #37, .T. ) ;
-#236 = CARTESIAN_POINT ( 'NONE',  ( -11.95619709466497200, 12.80867806743072100, 0.0000000000000000000 ) ) ;
-#237 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -13.49938242307055700, -9.043098855600515400 ) ) ;
-#238 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #63, 'distance_accuracy_value', 'NONE');
-#239 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#240 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 12.71645320005650200, -9.332048217417575800 ) ) ;
-#241 = VERTEX_POINT ( 'NONE', #288 ) ;
-#242 = CARTESIAN_POINT ( 'NONE',  ( -13.43113097961342600, 11.22330358046604500, -4.223022081046914300 ) ) ;
-#243 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.06075602578432400, -4.466646048030519900 ) ) ;
-#244 = CARTESIAN_POINT ( 'NONE',  ( -11.48058176557072800, -13.25012688627097500, -2.363866539248013600 ) ) ;
-#245 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -13.34697056415409800, -9.677231402964048700 ) ) ;
-#246 = CARTESIAN_POINT ( 'NONE',  ( -14.97244134110279600, -9.118887794102935400, -9.077190764789003600 ) ) ;
-#247 = PLANE ( 'NONE',  #284 ) ;
-#248 = CARTESIAN_POINT ( 'NONE',  ( -17.01314429508078200, -4.223434811203355300, -13.80276572851172300 ) ) ;
-#249 = CARTESIAN_POINT ( 'NONE',  ( -17.49995585283858900, 1.404682388073822600, 0.0000000000000000000 ) ) ;
-#250 = CARTESIAN_POINT ( 'NONE',  ( -14.86181133086172300, 9.346023294886833800, 0.0000000000000000000 ) ) ;
-#251 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999992900, -14.36140661634507900, 0.0000000000000000000 ) ) ;
-#252 = CARTESIAN_POINT ( 'NONE',  ( -16.16237278411541600, 6.855828451132831300, -0.0000000000000000000 ) ) ;
-#253 = CARTESIAN_POINT ( 'NONE',  ( -16.31112983945964600, 5.384540385383181700, -17.28762551760766500 ) ) ;
-#254 = CARTESIAN_POINT ( 'NONE',  ( -14.06277870346462700, 10.51013477084789600, -0.0000000000000000000 ) ) ;
-#255 = CARTESIAN_POINT ( 'NONE',  ( -15.65087282366257600, 7.898802276860550400, -8.527230531968040600 ) ) ;
-#256 = CARTESIAN_POINT ( 'NONE',  ( -16.66094888241420300, 5.534832409435043000, 0.0000000000000000000 ) ) ;
-#257 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -14.21089860348407000, -4.123843009819532700 ) ) ;
-#258 = ORIENTED_EDGE ( 'NONE', *, *, #460, .T. ) ;
-#259 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -14.06671520149299100, -5.576692317857658800 ) ) ;
-#260 = CARTESIAN_POINT ( 'NONE',  ( -17.33056803007589200, 2.806437157477432700, -0.0000000000000000000 ) ) ;
-#261 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, -2.500000000000000000, -15.00000000000000400 ) ) ;
-#262 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.07694536603865200, -4.305876794076501000 ) ) ;
-#263 = AXIS2_PLACEMENT_3D ( 'NONE', #140, #59, #310 ) ;
-#264 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#265 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -15.00000000000000200 ) ) ;
-#266 = VERTEX_POINT ( 'NONE', #89 ) ;
-#267 = PRESENTATION_STYLE_ASSIGNMENT (( #3 ) ) ;
-#268 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
-#269 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -0.6703113506374828200, -19.69287883649020500 ) ) ;
-#270 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507900, -0.5351775614532554600 ) ) ;
-#271 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -8.152464814218250300, -18.32949034492800400 ) ) ;
-#272 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #230, #17, #86, #257, #93, #395, #474, #259, #147, #94, #495, #145, #237, #245, #34, #74, #327, #283, #115, #382, #150, #437, #181, #485, #211, #552, #275, #27, #176, #105, #364, #274, #64, #21, #234, #202, #534, #469, #271, #170, #421, #141, #103, #361, #312, #18, #503, #367, #277, #541, #70, #111, #375, #461, #511, #198, #199, #232, #530, #465, #537, #562, #62, #269, #508, #510, #504, #109, #142, #527, #108, #406, #442, #144, #324, #287, #289, #292, #290, #298, #296, #297, #300, #52, #304, #95, #174, #346, #405, #342, #213, #387, #397, #390, #385, #399, #372, #351, #345, #350, #240, #332, #352, #348, #404, #335, #401, #280, #117, #549 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 1, 1, 1, 1, 1, 2, 2, 1, 1, 1, 1, 2, 2, 1, 1, 1, 1, 2, 2, 1, 1, 1, 1, 2, 2, 1, 1, 1, 1, 2, 2, 1, 1, 1, 1, 2, 2, 1, 1, 1, 1, 2, 2, 1, 1, 1, 2, 2, 1, 1, 1, 2, 2, 1, 1, 1, 2, 2, 1, 1, 2, 2, 2, 1, 1, 2, 2, 1, 1, 1, 2, 2, 1, 1, 1, 2, 2, 4 ),
- ( 0.0000000000000000000, 0.03124999999999768900, 0.04687499999999653100, 0.05468749999999594800, 0.05859374999999566300, 0.06054687499999553100, 0.06152343749999547600, 0.06249999999999542000, 0.09374999999999400500, 0.1093749999999932600, 0.1171874999999928900, 0.1210937499999927000, 0.1230468749999926300, 0.1249999999999925600, 0.1562499999999904500, 0.1718749999999893700, 0.1796874999999888700, 0.1835937499999886800, 0.1855468749999885400, 0.1874999999999883700, 0.2187499999999863400, 0.2343749999999853500, 0.2421874999999849000, 0.2460937499999846500, 0.2480468749999844600, 0.2499999999999842900, 0.2812499999999823500, 0.2968749999999814000, 0.3046874999999809000, 0.3085937499999807900, 0.3105468749999806300, 0.3124999999999805200, 0.3437499999999799000, 0.3593749999999795200, 0.3671874999999793500, 0.3710937499999792400, 0.3730468749999791800, 0.3749999999999791300, 0.4062499999999789100, 0.4218749999999787400, 0.4296874999999786800, 0.4335937499999786300, 0.4355468749999786800, 0.4374999999999786800, 0.4687499999999790700, 0.4843749999999792400, 0.4921874999999792900, 0.4960937499999793500, 0.4999999999999793500, 0.5312499999999797900, 0.5468749999999800200, 0.5546874999999801300, 0.5585937499999801300, 0.5624999999999801300, 0.5937499999999814600, 0.6093749999999820100, 0.6171874999999823500, 0.6210937499999824600, 0.6249999999999826800, 0.6562499999999840100, 0.6718749999999847900, 0.6796874999999851200, 0.6874999999999855700, 0.7499999999999886800, 0.7812499999999903400, 0.7968749999999910100, 0.8046874999999913400, 0.8124999999999916700, 0.8437499999999931200, 0.8593749999999938900, 0.8671874999999942300, 0.8710937499999944500, 0.8749999999999945600, 0.9062499999999960000, 0.9218749999999968900, 0.9296874999999972200, 0.9335937499999973400, 0.9374999999999975600, 1.000000000000000000 ),
- .UNSPECIFIED. ) ;
-#273 = CARTESIAN_POINT ( 'NONE',  ( -10.26947217786415800, 14.17377027607359900, -0.3865196535241238200 ) ) ;
-#274 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, -10.15455951668478500, -16.49875805471076600 ) ) ;
-#275 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -11.57507810736066000, -14.41832090275847700 ) ) ;
-#276 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 13.43003689892986700, -7.994521026827209600 ) ) ;
-#277 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -5.706142452007172000, -19.49969505264858300 ) ) ;
-#278 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #238 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #63, #56, #48 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#279 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#280 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 13.79017195501850800, -6.554529697532805300 ) ) ;
-#281 = ORIENTED_EDGE ( 'NONE', *, *, #446, .T. ) ;
-#282 = CARTESIAN_POINT ( 'NONE',  ( -11.48058176557072800, -13.25012688627097500, 0.0000000000000000000 ) ) ;
-#283 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -13.19579129194785200, -10.25433344108518900 ) ) ;
-#284 = AXIS2_PLACEMENT_3D ( 'NONE', #36, #172, #268 ) ;
-#285 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, -12.66891487482327400, -12.17065535444770900 ) ) ;
-#286 = CARTESIAN_POINT ( 'NONE',  ( -11.15360432399575300, 13.55803199540916600, 0.0000000000000000000 ) ) ;
-#287 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999992900, 4.216488870401042800, -17.88925483954782800 ) ) ;
-#288 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, -2.500000000000000000, -7.500000000000003600 ) ) ;
-#289 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 4.374291145393108600, -17.80110012735504200 ) ) ;
-#290 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 4.533200856303732700, -17.71106626672148800 ) ) ;
-#291 = CARTESIAN_POINT ( 'NONE',  ( -12.95562853678226000, 11.78766011922070900, -3.486580549491125900 ) ) ;
-#292 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 4.479448790771492400, -17.74173515567136100 ) ) ;
-#293 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #313 ) ;
-#294 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #206, #78 ) ;
-#295 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, 10.13617004994218200, -13.21544825709536900 ) ) ;
-#296 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 5.602471321319276500, -17.06633238992986200 ) ) ;
-#297 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 6.295372573732968200, -16.58393070876641700 ) ) ;
-#298 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 4.995258812598649500, -17.44476681412236000 ) ) ;
-#299 = ORIENTED_EDGE ( 'NONE', *, *, #456, .T. ) ;
-#300 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 6.589005965961614000, -16.36842394835232600 ) ) ;
-#301 = VERTEX_POINT ( 'NONE', #428 ) ;
-#302 = FILL_AREA_STYLE_COLOUR ( '', #557 ) ;
-#303 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #521 ) ) ;
-#304 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 6.882299741162485800, -16.14814343138463600 ) ) ;
-#305 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #521, .NOT_KNOWN. ) ;
-#306 = DIRECTION ( 'NONE',  ( 3.469446951953614200E-016, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#307 = EDGE_LOOP ( 'NONE', ( #120, #92, #190 ) ) ;
-#308 = VERTEX_POINT ( 'NONE', #317 ) ;
-#309 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, 2.500000000000000000, -7.500000000000003600 ) ) ;
-#310 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
-#311 = ORIENTED_EDGE ( 'NONE', *, *, #369, .T. ) ;
-#312 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -6.369514809710845600, -19.27571700682087300 ) ) ;
-#313 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #305, #228 ) ;
-#314 = VERTEX_POINT ( 'NONE', #261 ) ;
-#315 = AXIS2_PLACEMENT_3D ( 'NONE', #39, #520, #516 ) ;
-#316 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507900, 1.004479931793461800E-016 ) ) ;
-#317 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, 2.500000000000000000, -7.500000000000003600 ) ) ;
-#318 = ORIENTED_EDGE ( 'NONE', *, *, #528, .T. ) ;
-#319 = CARTESIAN_POINT ( 'NONE',  ( -14.02533519091943300, 10.48446881896906500, -5.299608887457036000 ) ) ;
-#320 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -15.00000000000000200 ) ) ;
-#321 = AXIS2_PLACEMENT_3D ( 'NONE', #493, #215, #560 ) ;
-#322 = SURFACE_STYLE_FILL_AREA ( #7 ) ;
-#323 = CARTESIAN_POINT ( 'NONE',  ( -17.04466186093418000, -0.4191720619316117200, -19.76675090149364100 ) ) ;
-#324 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 3.847822913614837900, -18.08869995066845600 ) ) ;
-#325 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, 2.500000000000000000, -15.00000000000000400 ) ) ;
-#326 = CARTESIAN_POINT ( 'NONE',  ( -12.79601897799036800, -11.98343839915354500, 0.0000000000000000000 ) ) ;
-#327 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -13.20820123996712400, -10.20864782163819700 ) ) ;
-#328 = CARTESIAN_POINT ( 'NONE',  ( -15.81997084822343800, -7.551938076883921300, -11.03559269798046900 ) ) ;
-#329 = VECTOR ( 'NONE', #77, 1000.000000000000000 ) ;
-#330 = LINE ( 'NONE', #309, #486 ) ;
-#331 = CARTESIAN_POINT ( 'NONE',  ( -12.11151104052345700, 14.06075602578432200, -4.466646048030519900 ) ) ;
-#332 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 13.00622062543572700, -8.738597184028305900 ) ) ;
-#333 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #410 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1, #529, #525 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#334 = DIRECTION ( 'NONE',  ( 3.469446951953614200E-016, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#335 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 13.49590331456400000, -7.460929962485355600 ) ) ;
-#336 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #388 ), #333 ) ;
-#337 = CARTESIAN_POINT ( 'NONE',  ( -17.49904883041353200, 1.033125172270318300, 0.0000000000000000000 ) ) ;
-#338 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -7.500000000000001800 ) ) ;
-#339 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #388 ) ) ;
-#340 = ORIENTED_EDGE ( 'NONE', *, *, #49, .F. ) ;
-#341 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -0.4191720619316117200, -19.76675090149364100 ) ) ;
-#342 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 10.50908363355873300, -12.66459169833178300 ) ) ;
-#343 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#344 = CARTESIAN_POINT ( 'NONE',  ( -14.26361526598402000, 12.01224674696709500, -10.73686135990815400 ) ) ;
-#345 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, 12.44835142864593900, -9.825912400961321700 ) ) ;
-#346 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 9.488383563588547200, -13.81959973773050100 ) ) ;
-#347 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #334, #123 ) ;
-#348 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 13.41202898303426700, -7.706028312343569600 ) ) ;
-#349 = LINE ( 'NONE', #216, #505 ) ;
-#350 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 12.47432323016941200, -9.778598640234175600 ) ) ;
-#351 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 12.39459992210539100, -9.922704219081172300 ) ) ;
-#352 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 13.28640568638857300, -8.049649323215009000 ) ) ;
-#353 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, 2.500000000000000000, -7.500000000000003600 ) ) ;
-#354 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #512 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #424, #107, #499 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#355 = ORIENTED_EDGE ( 'NONE', *, *, #491, .T. ) ;
-#356 = LINE ( 'NONE', #100, #329 ) ;
-#357 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -2.500000000000000000, 0.0000000000000000000 ) ) ;
-#358 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #373 ), #354 ) ;
-#359 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #373 ) ) ;
-#360 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#361 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -7.061562007735646200, -18.98671950511353000 ) ) ;
-#362 = EDGE_CURVE ( 'NONE', #241, #84, #477, .T. ) ;
-#363 = CARTESIAN_POINT ( 'NONE',  ( -10.57977948028619200, 14.32624687269461100, -1.373535626435547800 ) ) ;
-#364 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -10.21584956107986700, -16.42549761305223300 ) ) ;
-#365 = ADVANCED_FACE ( 'NONE', ( #464 ), #247, .F. ) ;
-#366 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#367 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -5.757851982018434200, -19.48392164626492100 ) ) ;
-#368 = LINE ( 'NONE', #265, #507 ) ;
-#369 = EDGE_CURVE ( 'NONE', #266, #241, #451, .T. ) ;
-#370 = AXIS2_PLACEMENT_3D ( 'NONE', #357, #207, #113 ) ;
-#371 = VECTOR ( 'NONE', #221, 1000.000000000000000 ) ;
-#372 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 12.31309628726494900, -10.06775329000738000 ) ) ;
-#373 = STYLED_ITEM ( 'NONE', ( #542 ), #152 ) ;
-#374 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 13.93329928466604700, -6.006639020025526000 ) ) ;
-#375 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -3.908456692765424300, -19.85742332784851200 ) ) ;
-#376 = AXIS2_PLACEMENT_3D ( 'NONE', #353, #480, #479 ) ;
-#377 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -2.500000000000002200 ) ) ;
-#378 = PLANE ( 'NONE',  #370 ) ;
-#379 = EDGE_LOOP ( 'NONE', ( #196, #134, #459, #318 ) ) ;
-#380 = VECTOR ( 'NONE', #58, 1000.000000000000000 ) ;
-#381 = CARTESIAN_POINT ( 'NONE',  ( -12.34110139270062200, -14.04476163078866700, -6.105195306969648100 ) ) ;
-#382 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -12.69414576513614000, -11.91704190623196000 ) ) ;
-#383 = EDGE_LOOP ( 'NONE', ( #311, #68, #60, #50 ) ) ;
-#384 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000500, -11.34663053348573800, -15.03000525751592100 ) ) ;
-#385 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 11.69962846693061900, -11.07630263006559400 ) ) ;
-#386 = AXIS2_PLACEMENT_3D ( 'NONE', #412, #306, #65 ) ;
-#387 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 10.87314208392986700, -12.20620713821426900 ) ) ;
-#388 = STYLED_ITEM ( 'NONE', ( #267 ), #81 ) ;
-#389 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507300, -0.0000000000000000000 ) ) ;
-#390 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999992900, 11.29999842508096600, -11.64485178847006200 ) ) ;
-#391 = VECTOR ( 'NONE', #214, 1000.000000000000000 ) ;
-#392 = LINE ( 'NONE', #217, #371 ) ;
-#393 = CARTESIAN_POINT ( 'NONE',  ( -16.75650218148410200, 2.598821974433776800, -18.78067262640343300 ) ) ;
-#394 = VECTOR ( 'NONE', #192, 1000.000000000000000 ) ;
-#395 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999992900, -14.09745202670420700, -5.301602292188104700 ) ) ;
-#396 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000002000, 7.907923154741387100, -15.41002021558290900 ) ) ;
-#397 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 10.94360338941646800, -12.11494525371175300 ) ) ;
-#398 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 12.01224674696709500, -10.73686135990815600 ) ) ;
-#399 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 12.11678651409660600, -10.40523052839349200 ) ) ;
-#400 = ORIENTED_EDGE ( 'NONE', *, *, #450, .T. ) ;
-#401 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999992900, 13.51162075934120700, -7.413503803055770700 ) ) ;
-#402 = ORIENTED_EDGE ( 'NONE', *, *, #445, .T. ) ;
-#403 = LINE ( 'NONE', #185, #394 ) ;
-#404 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 13.46276698863298500, -7.558944933299061500 ) ) ;
-#405 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 9.977397753708405800, -13.29541181264116500 ) ) ;
-#406 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 1.992779497125447600, -18.92701683704331500 ) ) ;
-#407 = VECTOR ( 'NONE', #472, 1000.000000000000000 ) ;
-#408 = LINE ( 'NONE', #193, #391 ) ;
-#409 = EDGE_LOOP ( 'NONE', ( #55, #448, #340, #75 ) ) ;
-#410 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1, 'distance_accuracy_value', 'NONE');
-#411 = AXIS2_PLACEMENT_3D ( 'NONE', #138, #12, #226 ) ;
-#412 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -15.00000000000000200 ) ) ;
-#413 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#414 = EDGE_LOOP ( 'NONE', ( #106, #61, #82 ) ) ;
-#415 = VECTOR ( 'NONE', #148, 1000.000000000000000 ) ;
-#416 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#417 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #264, #57 ) ;
-#418 = CARTESIAN_POINT ( 'NONE',  ( -17.33048227984313900, -2.806416115031809000, 0.0000000000000000000 ) ) ;
-#419 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -10.00000000000000200 ) ) ;
-#420 = SURFACE_STYLE_USAGE ( .BOTH. , #188 ) ;
-#421 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -8.034647135057969800, -18.40827551522465200 ) ) ;
-#422 = LINE ( 'NONE', #32, #494 ) ;
-#423 = FACE_OUTER_BOUND ( 'NONE', #383, .T. ) ;
-#424 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#425 = DIRECTION ( 'NONE',  ( 0.7071067811865474600, -0.0000000000000000000, -0.7071067811865475700 ) ) ;
-#426 = ADVANCED_FACE ( 'NONE', ( #449 ), #169, .T. ) ;
-#427 = CARTESIAN_POINT ( 'NONE',  ( -17.12070525874008800, -3.598561143592014800, -20.04470413810369300 ) ) ;
-#428 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.01661325511459600, -4.999999999999363200 ) ) ;
-#429 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#430 = CARTESIAN_POINT ( 'NONE',  ( -14.74499653202982700, 9.484445025865474200, -6.740069020323531400 ) ) ;
-#431 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#432 = VECTOR ( 'NONE', #554, 1000.000000000000000 ) ;
-#433 = FACE_OUTER_BOUND ( 'NONE', #9, .T. ) ;
-#434 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#435 = EDGE_CURVE ( 'NONE', #44, #2, #488, .T. ) ;
-#436 = CARTESIAN_POINT ( 'NONE',  ( -13.96221477709641500, -10.60120663497850700, 0.0000000000000000000 ) ) ;
-#437 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -12.06053164233559200, -13.43124934212544600 ) ) ;
-#438 = CARTESIAN_POINT ( 'NONE',  ( -16.50135469927666100, -5.915179682768411800, -12.68174041348847700 ) ) ;
-#439 = FACE_OUTER_BOUND ( 'NONE', #414, .T. ) ;
-#440 = CLOSED_SHELL ( 'NONE', ( #235, #25, #205, #191, #66, #365, #139, #98, #168, #53, #426 ) ) ;
-#441 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999992900, -14.36140661634507900, 0.0000000000000000000 ) ) ;
-#442 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.471911524531838800, -18.74022154441361500 ) ) ;
-#443 = CARTESIAN_POINT ( 'NONE',  ( -16.38102638013608800, 6.244277246612858400, 0.0000000000000000000 ) ) ;
-#444 = VECTOR ( 'NONE', #360, 1000.000000000000000 ) ;
-#445 = EDGE_CURVE ( 'NONE', #524, #2, #478, .T. ) ;
-#446 = EDGE_CURVE ( 'NONE', #179, #301, #272, .T. ) ;
-#447 = LINE ( 'NONE', #320, #407 ) ;
-#448 = ORIENTED_EDGE ( 'NONE', *, *, #491, .F. ) ;
-#449 = FACE_OUTER_BOUND ( 'NONE', #97, .T. ) ;
-#450 = EDGE_CURVE ( 'NONE', #96, #179, #547, .T. ) ;
-#451 = LINE ( 'NONE', #204, #545 ) ;
-#452 = EDGE_CURVE ( 'NONE', #526, #308, #533, .T. ) ;
-#453 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #482, #286, #220, #254, #250, #252, #256, #260, #249, #500, #418, #83, #80, #51, #47, #41, #531, #522 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ),
- ( 0.0000000000000000000, 0.1250000000000000000, 0.2500000000000000000, 0.3750000000000000000, 0.5000000000000000000, 0.6250000000000000000, 0.7500000000000000000, 0.8750000000000000000, 1.000000000000000000 ),
- .UNSPECIFIED. ) ;
-#454 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -2.500000000000002200 ) ) ;
-#455 = LINE ( 'NONE', #515, #566 ) ;
-#456 = EDGE_CURVE ( 'NONE', #84, #266, #514, .T. ) ;
-#457 = VECTOR ( 'NONE', #224, 1000.000000000000000 ) ;
-#458 = LINE ( 'NONE', #197, #380 ) ;
-#459 = ORIENTED_EDGE ( 'NONE', *, *, #565, .F. ) ;
-#460 = EDGE_CURVE ( 'NONE', #102, #44, #447, .T. ) ;
-#461 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -3.532447409171730200, -19.88459853636265300 ) ) ;
-#462 = EDGE_CURVE ( 'NONE', #102, #524, #422, .T. ) ;
-#463 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -10.00000000000000200 ) ) ;
-#464 = FACE_OUTER_BOUND ( 'NONE', #4, .T. ) ;
-#465 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.094992949187258100, -19.89034848285718800 ) ) ;
-#466 = VECTOR ( 'NONE', #558, 1000.000000000000000 ) ;
-#467 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #470 ) ;
-#468 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000200, 14.14030150361920200, -3.633740062766398700 ) ) ;
-#469 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -8.315916783477399900, -18.21639952351828700 ) ) ;
-#470 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#471 = CARTESIAN_POINT ( 'NONE',  ( -10.86283548450017400, 13.74070922685317000, 0.0000000000000000000 ) ) ;
-#472 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#473 = CARTESIAN_POINT ( 'NONE',  ( -17.35189103645412300, -2.491525661635703300, 0.0000000000000000000 ) ) ;
-#474 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -14.07609378015475000, -5.494390623994608100 ) ) ;
-#475 = EDGE_CURVE ( 'NONE', #301, #96, #122, .T. ) ;
-#476 = EDGE_CURVE ( 'NONE', #526, #266, #403, .T. ) ;
-#477 = LINE ( 'NONE', #338, #561 ) ;
-#478 = LINE ( 'NONE', #419, #444 ) ;
-#479 = DIRECTION ( 'NONE',  ( -0.7071067811865474600, 0.0000000000000000000, 0.7071067811865475700 ) ) ;
-#480 = DIRECTION ( 'NONE',  ( -0.7071067811865475700, 0.0000000000000000000, -0.7071067811865474600 ) ) ;
-#481 = CARTESIAN_POINT ( 'NONE',  ( -10.50861456293928600, -14.00725289273946600, -0.7879555130826712000 ) ) ;
-#482 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 14.36140661634507700, 0.0000000000000000000 ) ) ;
-#483 = FACE_OUTER_BOUND ( 'NONE', #15, .T. ) ;
-#484 = CARTESIAN_POINT ( 'NONE',  ( -13.46734278021766200, -13.52591792972261500, -9.163511897872822900 ) ) ;
-#485 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -11.89740670080023900, -13.77240979217026000 ) ) ;
-#486 = VECTOR ( 'NONE', #229, 1000.000000000000000 ) ;
-#487 = EDGE_CURVE ( 'NONE', #223, #526, #408, .T. ) ;
-#488 = LINE ( 'NONE', #490, #466 ) ;
-#489 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999987600, -9.400607248009196200, -17.54483218541413700 ) ) ;
-#490 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -10.00000000000000200 ) ) ;
-#491 = EDGE_CURVE ( 'NONE', #223, #84, #392, .T. ) ;
-#492 = FACE_BOUND ( 'NONE', #29, .T. ) ;
-#493 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, 2.500000000000000000, -15.00000000000000400 ) ) ;
-#494 = VECTOR ( 'NONE', #431, 1000.000000000000000 ) ;
-#495 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -13.95585770807954000, -6.524255936252595600 ) ) ;
-#496 = LINE ( 'NONE', #222, #457 ) ;
-#497 = FACE_OUTER_BOUND ( 'NONE', #307, .T. ) ;
-#498 = FACE_BOUND ( 'NONE', #5, .T. ) ;
-#499 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#500 = CARTESIAN_POINT ( 'NONE',  ( -17.50004414716141800, -1.404682388073818600, -0.0000000000000000000 ) ) ;
-#501 = EDGE_CURVE ( 'NONE', #96, #179, #453, .T. ) ;
-#502 = CARTESIAN_POINT ( 'NONE',  ( -16.93335018632397000, 4.537594713229169400, -11.47877261063374900 ) ) ;
-#503 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -5.835260986992471600, -19.45992954085011900 ) ) ;
-#504 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 0.5164787699178540200, -19.42955319659864000 ) ) ;
-#505 = VECTOR ( 'NONE', #413, 1000.000000000000000 ) ;
-#506 = FILL_AREA_STYLE ('',( #302 ) ) ;
-#507 = VECTOR ( 'NONE', #167, 1000.000000000000000 ) ;
-#508 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, -0.6125962072371194900, -19.68197855835433100 ) ) ;
-#509 = FACE_OUTER_BOUND ( 'NONE', #538, .T. ) ;
-#510 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -0.1305299468296517700, -19.58791826203516700 ) ) ;
-#511 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999992900, -3.342778685481559100, -19.89383953344517800 ) ) ;
-#512 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #424, 'distance_accuracy_value', 'NONE');
-#513 = PRODUCT_CONTEXT ( 'NONE', #11, 'mechanical' ) ;
-#514 = LINE ( 'NONE', #377, #415 ) ;
-#515 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, 2.500000000000000000, -7.500000000000001800 ) ) ;
-#516 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#517 = ORIENTED_EDGE ( 'NONE', *, *, #535, .T. ) ;
-#518 = EDGE_CURVE ( 'NONE', #2, #314, #496, .T. ) ;
-#519 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -2.500000000000000000, -7.500000000000001800 ) ) ;
-#520 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#521 = PRODUCT ( 'Barrel_Block_Right', 'Barrel_Block_Right', '', ( #513 ) ) ;
-#522 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#523 = FACE_OUTER_BOUND ( 'NONE', #8, .T. ) ;
-#524 = VERTEX_POINT ( 'NONE', #463 ) ;
-#525 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#526 = VERTEX_POINT ( 'NONE', #454 ) ;
-#527 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, 1.826314660963962200, -18.99028528121606000 ) ) ;
-#528 = EDGE_CURVE ( 'NONE', #112, #314, #349, .T. ) ;
-#529 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#530 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000200, -2.733208165794399800, -19.91089571395845000 ) ) ;
-#531 = CARTESIAN_POINT ( 'NONE',  ( -11.15420828979694600, -13.55761139123277200, -0.0000000000000000000 ) ) ;
-#532 = CARTESIAN_POINT ( 'NONE',  ( -10.19325982676205900, 14.36140661634507900, -0.5351775614532554600 ) ) ;
-#533 = LINE ( 'NONE', #564, #432 ) ;
-#534 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -8.637552081177227900, -17.98036523483620300 ) ) ;
-#535 = EDGE_CURVE ( 'NONE', #524, #112, #458, .T. ) ;
-#536 = CARTESIAN_POINT ( 'NONE',  ( -11.95619709466497200, 12.80867806743072300, -2.319990515011485200 ) ) ;
-#537 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, -1.332861971928564400, -19.80229763975079000 ) ) ;
-#538 = EDGE_LOOP ( 'NONE', ( #218, #133, #121, #402 ) ) ;
-#539 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, 3.469446951953614200E-016 ) ) ;
-#540 = CARTESIAN_POINT ( 'NONE',  ( -17.51414632421500200, -0.7342744335124070700, -14.08932372186838000 ) ) ;
-#541 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999994700, -5.679075146056106000, -19.50781386322586300 ) ) ;
-#542 = PRESENTATION_STYLE_ASSIGNMENT (( #420 ) ) ;
-#543 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000001100, -6.733313068079225700, -19.33453710525504100 ) ) ;
-#544 = SURFACE_STYLE_FILL_AREA ( #506 ) ;
-#545 = VECTOR ( 'NONE', #425, 1000.000000000000000 ) ;
-#546 = ORIENTED_EDGE ( 'NONE', *, *, #476, .F. ) ;
-#547 = LINE ( 'NONE', #416, #556 ) ;
-#548 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, -1.010080855333619100 ) ) ;
-#549 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999998200, 14.01661325511459600, -4.999999999999363200 ) ) ;
-#550 = EDGE_CURVE ( 'NONE', #314, #44, #368, .T. ) ;
-#551 = CARTESIAN_POINT ( 'NONE',  ( -14.97244134110279600, -9.118887794102935400, 0.0000000000000000000 ) ) ;
-#552 = CARTESIAN_POINT ( 'NONE',  ( -10.00000000000000000, -11.84687731333637800, -13.87490694883641700 ) ) ;
-#553 = CARTESIAN_POINT ( 'NONE',  ( -17.01314429508078200, -4.223434811203355300, 0.0000000000000000000 ) ) ;
-#554 = DIRECTION ( 'NONE',  ( 0.7071067811865474600, -0.0000000000000000000, -0.7071067811865475700 ) ) ;
-#555 = FACE_OUTER_BOUND ( 'NONE', #409, .T. ) ;
-#556 = VECTOR ( 'NONE', #429, 1000.000000000000000 ) ;
-#557 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#558 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#559 = FACE_OUTER_BOUND ( 'NONE', #379, .T. ) ;
-#560 = DIRECTION ( 'NONE',  ( -0.7071067811865474600, 0.0000000000000000000, 0.7071067811865475700 ) ) ;
-#561 = VECTOR ( 'NONE', #539, 1000.000000000000000 ) ;
-#562 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999989300, -0.9474098438282896300, -19.74225244982549700 ) ) ;
-#563 = CARTESIAN_POINT ( 'NONE',  ( -9.999999999999996400, -14.36140661634507500, 0.0000000000000000000 ) ) ;
-#564 = CARTESIAN_POINT ( 'NONE',  ( -4.999999999999996400, 2.500000000000000000, -7.500000000000003600 ) ) ;
-#565 = EDGE_CURVE ( 'NONE', #112, #102, #356, .T. ) ;
-#566 = VECTOR ( 'NONE', #54, 1000.000000000000000 ) ;
-ENDSEC;
-END-ISO-10303-21;

Firearms/The_Holdout_v3.0-RollaTroll/STEP/Barrel_Lock.step

@@ -1,989 +0,0 @@
-ISO-10303-21;
-HEADER;
-FILE_DESCRIPTION (( 'STEP AP214' ),
-    '1' );
-FILE_NAME ('Barrel_Lock.step',
-    '2015-01-13T04:29:59',
-    ( '' ),
-    ( '' ),
-    'SwSTEP 2.0',
-    'SolidWorks 2015',
-    '' );
-FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
-ENDSEC;
-
-DATA;
-#1 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353200E-016 ) ) ;
-#2 = AXIS2_PLACEMENT_3D ( 'NONE', #774, #482, #82 ) ;
-#3 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#4 = EDGE_CURVE ( 'NONE', #763, #554, #829, .T. ) ;
-#5 = ORIENTED_EDGE ( 'NONE', *, *, #144, .T. ) ;
-#6 = ADVANCED_FACE ( 'NONE', ( #831 ), #807, .T. ) ;
-#7 = CARTESIAN_POINT ( 'NONE',  ( 1.429431198968483800, -1.384708452543994200E-015, 11.30700258644437100 ) ) ;
-#8 = VERTEX_POINT ( 'NONE', #547 ) ;
-#9 = CARTESIAN_POINT ( 'NONE',  ( 47.08051799606202800, 1.517766952966372700, 13.92455064928214100 ) ) ;
-#10 = ORIENTED_EDGE ( 'NONE', *, *, #202, .F. ) ;
-#11 = AXIS2_PLACEMENT_3D ( 'NONE', #660, #656, #655 ) ;
-#12 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#13 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#14 = ORIENTED_EDGE ( 'NONE', *, *, #241, .F. ) ;
-#15 = EDGE_CURVE ( 'NONE', #918, #376, #808, .T. ) ;
-#16 = ORIENTED_EDGE ( 'NONE', *, *, #86, .T. ) ;
-#17 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353200E-016, -1.000000000000000000 ) ) ;
-#18 = EDGE_CURVE ( 'NONE', #918, #491, #820, .T. ) ;
-#19 = ORIENTED_EDGE ( 'NONE', *, *, #189, .F. ) ;
-#20 = AXIS2_PLACEMENT_3D ( 'NONE', #122, #51, #57 ) ;
-#21 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353200E-016 ) ) ;
-#22 = EDGE_CURVE ( 'NONE', #376, #641, #813, .T. ) ;
-#23 = CARTESIAN_POINT ( 'NONE',  ( 1.674476547363078000, -1.565937674834947600E-015, 12.78685148995787700 ) ) ;
-#24 = AXIS2_PLACEMENT_3D ( 'NONE', #423, #405, #402 ) ;
-#25 = CARTESIAN_POINT ( 'NONE',  ( 3.925799660857100600, 5.639248697864715600, 11.17230105531567700 ) ) ;
-#26 = VERTEX_POINT ( 'NONE', #494 ) ;
-#27 = VERTEX_POINT ( 'NONE', #484 ) ;
-#28 = EDGE_CURVE ( 'NONE', #790, #699, #797, .T. ) ;
-#29 = ORIENTED_EDGE ( 'NONE', *, *, #58, .T. ) ;
-#30 = CARTESIAN_POINT ( 'NONE',  ( 3.932757163988203500, 5.519277719366703700, 11.30124161927746600 ) ) ;
-#31 = CARTESIAN_POINT ( 'NONE',  ( 3.929828925672892200, 5.401830626665593500, 11.43158139154691200 ) ) ;
-#32 = CARTESIAN_POINT ( 'NONE',  ( -47.08051799606202800, -1.705265638220857300E-015, 13.92455064928214100 ) ) ;
-#33 = EDGE_CURVE ( 'NONE', #790, #397, #798, .T. ) ;
-#34 = CARTESIAN_POINT ( 'NONE',  ( 3.902708289264183800, 5.171863815336304300, 11.69482871373311800 ) ) ;
-#35 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 0.3054636362436686200 ) ) ;
-#36 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #938 ) ) ;
-#37 = EDGE_LOOP ( 'NONE', ( #672, #927, #627, #331 ) ) ;
-#38 = CARTESIAN_POINT ( 'NONE',  ( 3.878292360572320500, 5.058692381169700000, 11.82853913147729800 ) ) ;
-#39 = EDGE_LOOP ( 'NONE', ( #643, #941, #153, #751 ) ) ;
-#40 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.517766952966376200, -7.806255641895631900E-015 ) ) ;
-#41 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#42 = ORIENTED_EDGE ( 'NONE', *, *, #309, .F. ) ;
-#43 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353200E-016, -1.000000000000000000 ) ) ;
-#44 = EDGE_CURVE ( 'NONE', #397, #847, #819, .T. ) ;
-#45 = EDGE_CURVE ( 'NONE', #699, #847, #793, .T. ) ;
-#46 = PLANE ( 'NONE',  #167 ) ;
-#47 = ORIENTED_EDGE ( 'NONE', *, *, #238, .F. ) ;
-#48 = VERTEX_POINT ( 'NONE', #370 ) ;
-#49 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ;
-#50 = EDGE_CURVE ( 'NONE', #262, #158, #939, .T. ) ;
-#51 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#52 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353200E-016 ) ) ;
-#53 = CARTESIAN_POINT ( 'NONE',  ( 3.858988493936562400, 5.896446609406718900, 10.13166292336538800 ) ) ;
-#54 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.517766952966376200, 2.674550649282142300 ) ) ;
-#55 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -3.275379891800851000E-016, 2.674550649282142300 ) ) ;
-#56 = AXIS2_PLACEMENT_3D ( 'NONE', #806, #733, #41 ) ;
-#57 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#58 = EDGE_CURVE ( 'NONE', #26, #790, #787, .T. ) ;
-#59 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#60 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#61 = VERTEX_POINT ( 'NONE', #379 ) ;
-#62 = ORIENTED_EDGE ( 'NONE', *, *, #325, .T. ) ;
-#63 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#64 = ORIENTED_EDGE ( 'NONE', *, *, #816, .T. ) ;
-#65 = EDGE_CURVE ( 'NONE', #929, #699, #788, .T. ) ;
-#66 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.9998476951563913800, -0.01745240643727561200 ) ) ;
-#67 = EDGE_CURVE ( 'NONE', #262, #274, #795, .T. ) ;
-#68 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 6.250000000000000000, 2.674550649282142300 ) ) ;
-#69 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353200E-016, -1.000000000000000000 ) ) ;
-#70 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.387778780781445200E-016, 1.000000000000000000 ) ) ;
-#71 = ADVANCED_FACE ( 'NONE', ( #786 ), #261, .T. ) ;
-#72 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353200E-016 ) ) ;
-#73 = EDGE_CURVE ( 'NONE', #376, #274, #771, .T. ) ;
-#74 = CARTESIAN_POINT ( 'NONE',  ( -3.925799660856987800, 3.750000000000000400, 11.17230105531568200 ) ) ;
-#75 = EDGE_LOOP ( 'NONE', ( #420, #477, #222, #117 ) ) ;
-#76 = ORIENTED_EDGE ( 'NONE', *, *, #319, .F. ) ;
-#77 = AXIS2_PLACEMENT_3D ( 'NONE', #344, #337, #334 ) ;
-#78 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#79 = ADVANCED_FACE ( 'NONE', ( #773 ), #757, .T. ) ;
-#80 = CARTESIAN_POINT ( 'NONE',  ( 3.858988493936562400, 5.896446609406718900, 10.13166292336538800 ) ) ;
-#81 = EDGE_CURVE ( 'NONE', #661, #94, #759, .T. ) ;
-#82 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#83 = ADVANCED_FACE ( 'NONE', ( #770 ), #743, .T. ) ;
-#84 = CARTESIAN_POINT ( 'NONE',  ( 47.08051799606202800, -1.705265638220857500E-015, 13.92455064928214100 ) ) ;
-#85 = PLANE ( 'NONE',  #149 ) ;
-#86 = EDGE_CURVE ( 'NONE', #274, #929, #744, .T. ) ;
-#87 = ORIENTED_EDGE ( 'NONE', *, *, #818, .F. ) ;
-#88 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ;
-#89 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#90 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #938 ), #132 ) ;
-#91 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#92 = EDGE_CURVE ( 'NONE', #929, #918, #755, .T. ) ;
-#93 = CARTESIAN_POINT ( 'NONE',  ( 3.770290253189205300, 4.731957223354228000, 12.22682013071016300 ) ) ;
-#94 = VERTEX_POINT ( 'NONE', #148 ) ;
-#95 = EDGE_CURVE ( 'NONE', #763, #8, #745, .T. ) ;
-#96 = VERTEX_POINT ( 'NONE', #170 ) ;
-#97 = CARTESIAN_POINT ( 'NONE',  ( 3.653229635366833400, 4.530575615354298900, 12.48898951476658700 ) ) ;
-#98 = EDGE_CURVE ( 'NONE', #8, #877, #762, .T. ) ;
-#99 = AXIS2_PLACEMENT_3D ( 'NONE', #308, #915, #783 ) ;
-#100 = CARTESIAN_POINT ( 'NONE',  ( 3.392242828982661200, 4.262572511403611500, 12.86278652105557700 ) ) ;
-#101 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353000E-016, -1.000000000000000000 ) ) ;
-#102 = AXIS2_PLACEMENT_3D ( 'NONE', #429, #426, #417 ) ;
-#103 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353200E-016 ) ) ;
-#104 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ;
-#105 = CARTESIAN_POINT ( 'NONE',  ( -1.429431198968483800, -1.384708452543994200E-015, 11.30700258644437100 ) ) ;
-#106 = ORIENTED_EDGE ( 'NONE', *, *, #107, .F. ) ;
-#107 = EDGE_CURVE ( 'NONE', #877, #823, #747, .T. ) ;
-#108 = ORIENTED_EDGE ( 'NONE', *, *, #73, .F. ) ;
-#109 = CARTESIAN_POINT ( 'NONE',  ( 3.292632601618952200, 4.180819623671483000, 12.98150479461697100 ) ) ;
-#110 = EDGE_CURVE ( 'NONE', #823, #193, #738, .T. ) ;
-#111 = EDGE_CURVE ( 'NONE', #193, #661, #737, .T. ) ;
-#112 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#113 = AXIS2_PLACEMENT_3D ( 'NONE', #133, #687, #461 ) ;
-#114 = ORIENTED_EDGE ( 'NONE', *, *, #162, .T. ) ;
-#115 = ORIENTED_EDGE ( 'NONE', *, *, #263, .F. ) ;
-#116 = ORIENTED_EDGE ( 'NONE', *, *, #227, .F. ) ;
-#117 = ORIENTED_EDGE ( 'NONE', *, *, #22, .F. ) ;
-#118 = EDGE_CURVE ( 'NONE', #158, #918, #785, .T. ) ;
-#119 = CARTESIAN_POINT ( 'NONE',  ( 3.925799660857100600, 5.639248697864715600, 11.17230105531567700 ) ) ;
-#120 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.621509277121385100E-016, 1.000000000000000000 ) ) ;
-#121 = AXIS2_PLACEMENT_3D ( 'NONE', #310, #305, #302 ) ;
-#122 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000900, 2.674550649282141800 ) ) ;
-#123 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#124 = EDGE_CURVE ( 'NONE', #158, #262, #736, .T. ) ;
-#125 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.517766952966376200, 2.674550649282142300 ) ) ;
-#126 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, 2.674550649282142300 ) ) ;
-#127 = ORIENTED_EDGE ( 'NONE', *, *, #98, .F. ) ;
-#128 = ORIENTED_EDGE ( 'NONE', *, *, #33, .F. ) ;
-#129 = EDGE_CURVE ( 'NONE', #26, #174, #735, .T. ) ;
-#130 = CARTESIAN_POINT ( 'NONE',  ( 1.837840112959474400, 1.517766952966376200, 13.77341742563354800 ) ) ;
-#131 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 2.674550649282144000 ) ) ;
-#132 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #803 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #822, #815, #812 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#133 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 2.674550649282144000 ) ) ;
-#134 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, 2.674550649282142300 ) ) ;
-#135 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.621509277121385100E-016, 1.000000000000000000 ) ) ;
-#136 = EDGE_CURVE ( 'NONE', #870, #26, #727, .T. ) ;
-#137 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#138 = EDGE_LOOP ( 'NONE', ( #571, #926, #332, #422 ) ) ;
-#139 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#140 = ORIENTED_EDGE ( 'NONE', *, *, #44, .F. ) ;
-#141 = ADVANCED_FACE ( 'NONE', ( #728 ), #712, .T. ) ;
-#142 = EDGE_CURVE ( 'NONE', #174, #397, #715, .T. ) ;
-#143 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, 2.674550649282142300 ) ) ;
-#144 = EDGE_CURVE ( 'NONE', #48, #437, #892, .T. ) ;
-#145 = CARTESIAN_POINT ( 'NONE',  ( -47.08051799606202800, 21.24999999999999600, 13.92455064928214100 ) ) ;
-#146 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 2.674550649282141800 ) ) ;
-#147 = ADVANCED_FACE ( 'NONE', ( #711 ), #693, .T. ) ;
-#148 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -1.582800958306120000E-015, 12.92455064928212500 ) ) ;
-#149 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #401, #230 ) ;
-#150 = CARTESIAN_POINT ( 'NONE',  ( -3.925799660856987800, 21.24999999999999600, 11.17230105531568200 ) ) ;
-#151 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353200E-016 ) ) ;
-#152 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#153 = ORIENTED_EDGE ( 'NONE', *, *, #363, .T. ) ;
-#154 = ADVANCED_FACE ( 'NONE', ( #716 ), #724, .T. ) ;
-#155 = CARTESIAN_POINT ( 'NONE',  ( -1.953169735326209900, 3.750000000000000000, 13.75152665986518000 ) ) ;
-#156 = ORIENTED_EDGE ( 'NONE', *, *, #357, .F. ) ;
-#157 = AXIS2_PLACEMENT_3D ( 'NONE', #512, #565, #567 ) ;
-#158 = VERTEX_POINT ( 'NONE', #506 ) ;
-#159 = CARTESIAN_POINT ( 'NONE',  ( 4.000000000000000000, 3.750000000000000000, 3.040329894602614000E-016 ) ) ;
-#160 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#161 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#162 = EDGE_CURVE ( 'NONE', #48, #96, #695, .T. ) ;
-#163 = CARTESIAN_POINT ( 'NONE',  ( 3.064551038794717900, 4.033742443024101100, 13.20485933062191800 ) ) ;
-#164 = EDGE_CURVE ( 'NONE', #96, #321, #707, .T. ) ;
-#165 = ORIENTED_EDGE ( 'NONE', *, *, #241, .T. ) ;
-#166 = VERTEX_POINT ( 'NONE', #414 ) ;
-#167 = AXIS2_PLACEMENT_3D ( 'NONE', #753, #273, #828 ) ;
-#168 = CARTESIAN_POINT ( 'NONE',  ( 2.935874092393977000, 3.968762847536987600, 13.30910884713770100 ) ) ;
-#169 = EDGE_CURVE ( 'NONE', #321, #883, #882, .T. ) ;
-#170 = CARTESIAN_POINT ( 'NONE',  ( -1.580815456570131300, 5.896446609406727800, 11.63980060829897300 ) ) ;
-#171 = AXIS2_PLACEMENT_3D ( 'NONE', #284, #280, #271 ) ;
-#172 = CARTESIAN_POINT ( 'NONE',  ( 2.656662179938026600, 3.862781072260489200, 13.49142557423957600 ) ) ;
-#173 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ;
-#174 = VERTEX_POINT ( 'NONE', #317 ) ;
-#175 = CARTESIAN_POINT ( 'NONE',  ( 2.502559484795804100, 3.820604994705768800, 13.57157697875497400 ) ) ;
-#176 = EDGE_CURVE ( 'NONE', #883, #359, #709, .T. ) ;
-#177 = CARTESIAN_POINT ( 'NONE',  ( 2.180558755780593700, 3.764484396579413700, 13.69775746504424600 ) ) ;
-#178 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353500E-016, -1.000000000000000000 ) ) ;
-#179 = AXIS2_PLACEMENT_3D ( 'NONE', #734, #469, #702 ) ;
-#180 = CARTESIAN_POINT ( 'NONE',  ( 2.927252276101572000, -1.374810744607774600E-015, 11.22618166776715800 ) ) ;
-#181 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#182 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353200E-016 ) ) ;
-#183 = ORIENTED_EDGE ( 'NONE', *, *, #363, .F. ) ;
-#184 = EDGE_CURVE ( 'NONE', #359, #437, #873, .T. ) ;
-#185 = ORIENTED_EDGE ( 'NONE', *, *, #301, .T. ) ;
-#186 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#187 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -3.275379891800850500E-016, 2.674550649282141800 ) ) ;
-#188 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#189 = EDGE_CURVE ( 'NONE', #96, #174, #717, .T. ) ;
-#190 = EDGE_CURVE ( 'NONE', #870, #321, #681, .T. ) ;
-#191 = DIRECTION ( 'NONE',  ( 0.1736481776669308000, -1.770748608697071300E-018, -0.9848077530122080200 ) ) ;
-#192 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #782 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #89, #638, #160 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#193 = VERTEX_POINT ( 'NONE', #180 ) ;
-#194 = ORIENTED_EDGE ( 'NONE', *, *, #335, .T. ) ;
-#195 = EDGE_CURVE ( 'NONE', #929, #27, #690, .T. ) ;
-#196 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#197 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#198 = DIRECTION ( 'NONE',  ( 0.9848077530122080200, -2.023974921244920100E-017, 0.1736481776669308000 ) ) ;
-#199 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000900, 2.674550649282141800 ) ) ;
-#200 = AXIS2_PLACEMENT_3D ( 'NONE', #242, #240, #239 ) ;
-#201 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#202 = EDGE_CURVE ( 'NONE', #27, #491, #671, .T. ) ;
-#203 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.165560703508817100E-016 ) ) ;
-#204 = ORIENTED_EDGE ( 'NONE', *, *, #124, .T. ) ;
-#205 = EDGE_LOOP ( 'NONE', ( #921, #64, #413, #412, #890, #207, #347 ) ) ;
-#206 = CARTESIAN_POINT ( 'NONE',  ( 1.674476547363078000, -1.565937674834947600E-015, 12.78685148995787700 ) ) ;
-#207 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ;
-#208 = EDGE_CURVE ( 'NONE', #437, #61, #680, .T. ) ;
-#209 = PLANE ( 'NONE',  #862 ) ;
-#210 = EDGE_LOOP ( 'NONE', ( #288, #856, #411, #799, #333 ) ) ;
-#211 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#212 = EDGE_CURVE ( 'NONE', #61, #27, #667, .T. ) ;
-#213 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.165560703508817100E-016 ) ) ;
-#214 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.896446609406726000, 11.07099725868886800 ) ) ;
-#215 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.621509277121385100E-016, 1.000000000000000000 ) ) ;
-#216 = AXIS2_PLACEMENT_3D ( 'NONE', #131, #203, #60 ) ;
-#217 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#218 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#219 = EDGE_CURVE ( 'NONE', #847, #48, #834, .T. ) ;
-#220 = CARTESIAN_POINT ( 'NONE',  ( 1.837840112959474400, 21.24999999999999600, 13.77341742563354800 ) ) ;
-#221 = CARTESIAN_POINT ( 'NONE',  ( -1.385543687193592900, 1.517766952966373100, 2.343471741394346900 ) ) ;
-#222 = ORIENTED_EDGE ( 'NONE', *, *, #720, .T. ) ;
-#223 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, 2.674550649282142300 ) ) ;
-#224 = EDGE_LOOP ( 'NONE', ( #204, #853 ) ) ;
-#225 = ORIENTED_EDGE ( 'NONE', *, *, #257, .T. ) ;
-#226 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6338834764831845500, 13.55843412576531800 ) ) ;
-#227 = EDGE_CURVE ( 'NONE', #641, #675, #669, .T. ) ;
-#228 = ADVANCED_FACE ( 'NONE', ( #658 ), #646, .T. ) ;
-#229 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#230 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -8.107546385606971400E-017, 1.000000000000000000 ) ) ;
-#231 = EDGE_CURVE ( 'NONE', #675, #235, #651, .T. ) ;
-#232 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #311 ) ;
-#233 = EDGE_LOOP ( 'NONE', ( #838, #10, #662, #173 ) ) ;
-#234 = AXIS2_PLACEMENT_3D ( 'NONE', #688, #686, #682 ) ;
-#235 = VERTEX_POINT ( 'NONE', #74 ) ;
-#236 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 2.674550649282142300 ) ) ;
-#237 = PRODUCT_CONTEXT ( 'NONE', #311, 'mechanical' ) ;
-#238 = EDGE_CURVE ( 'NONE', #883, #628, #647, .T. ) ;
-#239 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.156482317317871700E-016, 1.000000000000000000 ) ) ;
-#240 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#241 = EDGE_CURVE ( 'NONE', #628, #463, #657, .T. ) ;
-#242 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, 2.674550649282142300 ) ) ;
-#243 = EDGE_CURVE ( 'NONE', #463, #359, #624, .T. ) ;
-#244 = ORIENTED_EDGE ( 'NONE', *, *, #314, .T. ) ;
-#245 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ;
-#246 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #676 ) ;
-#247 = EDGE_LOOP ( 'NONE', ( #19, #290, #864, #140, #361 ) ) ;
-#248 = EDGE_CURVE ( 'NONE', #675, #628, #639, .T. ) ;
-#249 = AXIS2_PLACEMENT_3D ( 'NONE', #885, #748, #722 ) ;
-#250 = CARTESIAN_POINT ( 'NONE',  ( 2.012824271026842900, 3.749999999999998700, 13.74444213371330500 ) ) ;
-#251 = ORIENTED_EDGE ( 'NONE', *, *, #670, .T. ) ;
-#252 = EDGE_CURVE ( 'NONE', #463, #61, #620, .T. ) ;
-#253 = ORIENTED_EDGE ( 'NONE', *, *, #176, .T. ) ;
-#254 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#255 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353200E-016, -1.000000000000000000 ) ) ;
-#256 = EDGE_CURVE ( 'NONE', #166, #823, #617, .T. ) ;
-#257 = EDGE_CURVE ( 'NONE', #166, #848, #609, .T. ) ;
-#258 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#259 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.224646799147353200E-016 ) ) ;
-#260 = AXIS2_PLACEMENT_3D ( 'NONE', #366, #936, #535 ) ;
-#261 = PLANE ( 'NONE',  #327 ) ;
-#262 = VERTEX_POINT ( 'NONE', #679 ) ;
-#263 = EDGE_CURVE ( 'NONE', #193, #848, #591, .T. ) ;
-#264 = ORIENTED_EDGE ( 'NONE', *, *, #144, .F. ) ;
-#265 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#266 = AXIS2_PLACEMENT_3D ( 'NONE', #223, #218, #215 ) ;
-#267 = EDGE_CURVE ( 'NONE', #848, #880, #604, .T. ) ;
-#268 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.517766952966376200, 2.674550649282141800 ) ) ;
-#269 = PRESENTATION_STYLE_ASSIGNMENT (( #495 ) ) ;
-#270 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6338834764831845500, 2.674550649282141800 ) ) ;
-#271 = DIRECTION ( 'NONE',  ( 8.014694376476138700E-015, -8.490142347962011800E-017, 1.000000000000000000 ) ) ;
-#272 = ADVANCED_FACE ( 'NONE', ( #588 ), #577, .F. ) ;
-#273 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#274 = VERTEX_POINT ( 'NONE', #615 ) ;
-#275 = ORIENTED_EDGE ( 'NONE', *, *, #357, .T. ) ;
-#276 = EDGE_CURVE ( 'NONE', #661, #880, #580, .T. ) ;
-#277 = CARTESIAN_POINT ( 'NONE',  ( 47.08051799606202800, 1.517766952966372700, 13.92455064928214100 ) ) ;
-#278 = EDGE_LOOP ( 'NONE', ( #572, #836, #889, #750 ) ) ;
-#279 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#280 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -8.107546385606971400E-017 ) ) ;
-#281 = AXIS2_PLACEMENT_3D ( 'NONE', #674, #666, #623 ) ;
-#282 = CARTESIAN_POINT ( 'NONE',  ( -3.560214963783526500, 0.6338834764831827700, 11.19202763783137300 ) ) ;
-#283 = CARTESIAN_POINT ( 'NONE',  ( 0.4644308463257504300, 6.728665048258110000E-016, 0.04063243404525424700 ) ) ;
-#284 = CARTESIAN_POINT ( 'NONE',  ( -47.08051799606202800, 3.750000000000000000, 13.92455064928214100 ) ) ;
-#285 = EDGE_CURVE ( 'NONE', #860, #877, #579, .T. ) ;
-#286 = CARTESIAN_POINT ( 'NONE',  ( 3.627185627347550700, 3.750000000000000000, 7.764346757650668200 ) ) ;
-#287 = CARTESIAN_POINT ( 'NONE',  ( 4.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#288 = ORIENTED_EDGE ( 'NONE', *, *, #67, .F. ) ;
-#289 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
-#290 = ORIENTED_EDGE ( 'NONE', *, *, #162, .F. ) ;
-#291 = EDGE_CURVE ( 'NONE', #346, #166, #637, .T. ) ;
-#292 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#293 = ADVANCED_FACE ( 'NONE', ( #570 ), #569, .T. ) ;
-#294 = DIRECTION ( 'NONE',  ( 4.440892098500625400E-015, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#295 = EDGE_CURVE ( 'NONE', #880, #841, #568, .T. ) ;
-#296 = DIRECTION ( 'NONE',  ( -0.9726180588186090800, 0.0000000000000000000, -0.2324093622467062700 ) ) ;
-#297 = MANIFOLD_SOLID_BREP ( 'Fillet3', #923 ) ;
-#298 = DIRECTION ( 'NONE',  ( 2.137303368082809100E-018, -0.9998476951563913800, 0.01745240643727537600 ) ) ;
-#299 = STYLED_ITEM ( 'NONE', ( #269 ), #756 ) ;
-#300 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6338834764831854400, 2.674550649282142300 ) ) ;
-#301 = EDGE_CURVE ( 'NONE', #640, #8, #528, .T. ) ;
-#302 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.387778780781445200E-016, 1.000000000000000000 ) ) ;
-#303 = CARTESIAN_POINT ( 'NONE',  ( 1.778030012254011100, 0.6338834764831726700, 13.41221933504386000 ) ) ;
-#304 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #740, #805 ) ;
-#305 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#306 = ORIENTED_EDGE ( 'NONE', *, *, #190, .F. ) ;
-#307 = ORIENTED_EDGE ( 'NONE', *, *, #345, .T. ) ;
-#308 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000900, 2.674550649282142300 ) ) ;
-#309 = EDGE_CURVE ( 'NONE', #640, #860, #562, .T. ) ;
-#310 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, 2.674550649282142300 ) ) ;
-#311 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#312 = CONICAL_SURFACE ( 'NONE', #99, 2.674550649282150200, 0.7853981633974548300 ) ;
-#313 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #789 ) ;
-#314 = EDGE_CURVE ( 'NONE', #554, #640, #566, .T. ) ;
-#315 = SURFACE_STYLE_FILL_AREA ( #407 ) ;
-#316 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#317 = CARTESIAN_POINT ( 'NONE',  ( -1.458027652601156900, 5.896446609406721600, 10.94343636797895100 ) ) ;
-#318 = CONICAL_SURFACE ( 'NONE', #922, 51.08051799606202100, 0.7853981633974552700 ) ;
-#319 = EDGE_CURVE ( 'NONE', #675, #640, #518, .T. ) ;
-#320 = ORIENTED_EDGE ( 'NONE', *, *, #720, .F. ) ;
-#321 = VERTEX_POINT ( 'NONE', #691 ) ;
-#322 = AXIS2_PLACEMENT_3D ( 'NONE', #895, #279, #456 ) ;
-#323 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ;
-#324 = ORIENTED_EDGE ( 'NONE', *, *, #65, .F. ) ;
-#325 = EDGE_CURVE ( 'NONE', #628, #554, #519, .T. ) ;
-#326 = CARTESIAN_POINT ( 'NONE',  ( -1.837840112959474100, 3.749999999999998700, 13.77341742563354800 ) ) ;
-#327 = AXIS2_PLACEMENT_3D ( 'NONE', #287, #259, #255 ) ;
-#328 = SHAPE_DEFINITION_REPRESENTATION ( #246, #756 ) ;
-#329 = FACE_OUTER_BOUND ( 'NONE', #663, .T. ) ;
-#330 = CARTESIAN_POINT ( 'NONE',  ( -1.876450476106270400, 3.749999999999971600, 13.76702400947704400 ) ) ;
-#331 = ORIENTED_EDGE ( 'NONE', *, *, #248, .F. ) ;
-#332 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ;
-#333 = ORIENTED_EDGE ( 'NONE', *, *, #73, .T. ) ;
-#334 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#335 = EDGE_CURVE ( 'NONE', #166, #27, #515, .T. ) ;
-#336 = CARTESIAN_POINT ( 'NONE',  ( -1.953169735326209900, 3.752143779633990500, 13.75152665986518300 ) ) ;
-#337 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#338 = AXIS2_PLACEMENT_3D ( 'NONE', #598, #592, #586 ) ;
-#339 = FACE_OUTER_BOUND ( 'NONE', #888, .T. ) ;
-#340 = CARTESIAN_POINT ( 'NONE',  ( -1.914927550535769500, 3.750715564715933100, 13.75972003628026400 ) ) ;
-#341 = VECTOR ( 'NONE', #781, 1000.000000000000100 ) ;
-#342 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 8.107546385606971400E-017 ) ) ;
-#343 = FACE_OUTER_BOUND ( 'NONE', #447, .T. ) ;
-#344 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 2.674550649282144000 ) ) ;
-#345 = EDGE_CURVE ( 'NONE', #463, #880, #510, .T. ) ;
-#346 = VERTEX_POINT ( 'NONE', #600 ) ;
-#347 = ORIENTED_EDGE ( 'NONE', *, *, #111, .T. ) ;
-#348 = CARTESIAN_POINT ( 'NONE',  ( -1.429431198968483800, 3.750000000000000000, 11.30700258644437100 ) ) ;
-#349 = ORIENTED_EDGE ( 'NONE', *, *, #208, .F. ) ;
-#350 = EDGE_CURVE ( 'NONE', #848, #61, #509, .T. ) ;
-#351 = EDGE_CURVE ( 'NONE', #235, #376, #517, .T. ) ;
-#352 = LINE ( 'NONE', #553, #341 ) ;
-#353 = CYLINDRICAL_SURFACE ( 'NONE', #884, 51.08051799606202800 ) ;
-#354 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #299 ) ) ;
-#355 = CONICAL_SURFACE ( 'NONE', #542, 1.499999999999985800, 0.7853981633974549400 ) ;
-#356 = CIRCLE ( 'NONE', #742, 1.250000000000000200 ) ;
-#357 = EDGE_CURVE ( 'NONE', #235, #870, #501, .T. ) ;
-#358 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#359 = VERTEX_POINT ( 'NONE', #364 ) ;
-#360 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
-#361 = ORIENTED_EDGE ( 'NONE', *, *, #142, .F. ) ;
-#362 = ORIENTED_EDGE ( 'NONE', *, *, #263, .T. ) ;
-#363 = EDGE_CURVE ( 'NONE', #841, #554, #508, .T. ) ;
-#364 = CARTESIAN_POINT ( 'NONE',  ( 1.837840112959474100, 3.749999999999998700, 13.77341742563354800 ) ) ;
-#365 = AXIS2_PLACEMENT_3D ( 'NONE', #530, #479, #451 ) ;
-#366 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 2.674550649282142300 ) ) ;
-#367 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -8.490142347962011800E-017, 1.000000000000000000 ) ) ;
-#368 = CIRCLE ( 'NONE', #794, 2.308434125765329400 ) ;
-#369 = FACE_OUTER_BOUND ( 'NONE', #504, .T. ) ;
-#370 = CARTESIAN_POINT ( 'NONE',  ( 3.910116291027952300, 5.896446609406733200, 10.89560136838248300 ) ) ;
-#371 = TOROIDAL_SURFACE ( 'NONE', #2, 9.999999999999998200, 1.250000000000000000 ) ;
-#372 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 9.912705577010328000E-017, -1.000000000000000000 ) ) ;
-#373 = CYLINDRICAL_SURFACE ( 'NONE', #698, 51.08051799606202800 ) ;
-#374 = ORIENTED_EDGE ( 'NONE', *, *, #219, .T. ) ;
-#375 = CARTESIAN_POINT ( 'NONE',  ( -2.601316260716855400, 1.000000000000000900, 2.052960038585963900 ) ) ;
-#376 = VERTEX_POINT ( 'NONE', #478 ) ;
-#377 = ORIENTED_EDGE ( 'NONE', *, *, #350, .T. ) ;
-#378 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.542893218813453000, 2.674550649282142300 ) ) ;
-#379 = CARTESIAN_POINT ( 'NONE',  ( 3.925799660856987800, 1.517766952966369300, 11.17230105531568200 ) ) ;
-#380 = AXIS2_PLACEMENT_3D ( 'NONE', #754, #835, #608 ) ;
-#381 = ADVANCED_FACE ( 'NONE', ( #497 ), #498, .T. ) ;
-#382 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#383 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -8.107546385606971400E-017 ) ) ;
-#384 = CARTESIAN_POINT ( 'NONE',  ( 3.858988493936562400, 5.896446609406718900, 10.13166292336538800 ) ) ;
-#385 = FACE_OUTER_BOUND ( 'NONE', #792, .T. ) ;
-#386 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#387 = CONICAL_SURFACE ( 'NONE', #500, 8.749999999999998200, 0.7853981633974482800 ) ;
-#388 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.749999999999999100, 8.924550649282144500 ) ) ;
-#389 = CIRCLE ( 'NONE', #648, 2.674550649282150200 ) ;
-#390 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #211, #188 ) ;
-#391 = ADVANCED_FACE ( 'NONE', ( #486 ), #209, .F. ) ;
-#392 = CARTESIAN_POINT ( 'NONE',  ( 3.627185627347550700, 3.750000000000000000, 7.764346757650668200 ) ) ;
-#393 = FACE_OUTER_BOUND ( 'NONE', #247, .T. ) ;
-#394 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, 2.674550649282142300 ) ) ;
-#395 = ORIENTED_EDGE ( 'NONE', *, *, #231, .F. ) ;
-#396 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#397 = VERTEX_POINT ( 'NONE', #214 ) ;
-#398 = ORIENTED_EDGE ( 'NONE', *, *, #28, .T. ) ;
-#399 = CARTESIAN_POINT ( 'NONE',  ( 3.910116291027952300, 5.896446609406733200, 10.89560136838248300 ) ) ;
-#400 = ADVANCED_FACE ( 'NONE', ( #499 ), #471, .T. ) ;
-#401 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 8.107546385606971400E-017 ) ) ;
-#402 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.033010484478849700E-016, -1.000000000000000000 ) ) ;
-#403 = CARTESIAN_POINT ( 'NONE',  ( 2.601316260716855400, 3.749999999999579900, 2.052960038585963900 ) ) ;
-#404 = CONICAL_SURFACE ( 'NONE', #113, 2.369087013038475600, 0.01745329251993527400 ) ;
-#405 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#406 = FACE_OUTER_BOUND ( 'NONE', #920, .T. ) ;
-#407 = FILL_AREA_STYLE ('',( #859 ) ) ;
-#408 = FACE_OUTER_BOUND ( 'NONE', #800, .T. ) ;
-#409 = AXIS2_PLACEMENT_3D ( 'NONE', #545, #541, #538 ) ;
-#410 = ORIENTED_EDGE ( 'NONE', *, *, #267, .F. ) ;
-#411 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ;
-#412 = ORIENTED_EDGE ( 'NONE', *, *, #98, .T. ) ;
-#413 = ORIENTED_EDGE ( 'NONE', *, *, #95, .T. ) ;
-#414 = CARTESIAN_POINT ( 'NONE',  ( 2.245224718312500500, 0.6338834764831771100, 2.138048946324491200 ) ) ;
-#415 = CIRCLE ( 'NONE', #846, 10.24999999999998200 ) ;
-#416 = FACE_OUTER_BOUND ( 'NONE', #881, .T. ) ;
-#417 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -9.527727259606684300E-017, 1.000000000000000000 ) ) ;
-#418 = CIRCLE ( 'NONE', #440, 1.249999999999999800 ) ;
-#419 = CONICAL_SURFACE ( 'NONE', #216, 2.369087013038475600, 0.01745329251993527400 ) ;
-#420 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ;
-#421 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #299 ), #481 ) ;
-#422 = ORIENTED_EDGE ( 'NONE', *, *, #202, .T. ) ;
-#423 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.896446609406726900, 2.674550649282142300 ) ) ;
-#424 = ORIENTED_EDGE ( 'NONE', *, *, #252, .T. ) ;
-#425 = CARTESIAN_POINT ( 'NONE',  ( 3.925799660856987800, 21.24999999999999600, 11.17230105531568200 ) ) ;
-#426 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.165560703508817100E-016 ) ) ;
-#427 = CARTESIAN_POINT ( 'NONE',  ( 3.800615354630612100, 5.173356035065731700, 9.347695897872077000 ) ) ;
-#428 = AXIS2_PLACEMENT_3D ( 'NONE', #9, #3, #59 ) ;
-#429 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.896446609406726000, 2.674550649282142300 ) ) ;
-#430 = FACE_OUTER_BOUND ( 'NONE', #582, .T. ) ;
-#431 = CARTESIAN_POINT ( 'NONE',  ( 3.723980338268660700, 4.455034556531525200, 8.561112189452144200 ) ) ;
-#432 = FACE_OUTER_BOUND ( 'NONE', #505, .T. ) ;
-#433 = FACE_OUTER_BOUND ( 'NONE', #673, .T. ) ;
-#434 = CARTESIAN_POINT ( 'NONE',  ( -1.070145909339105000, 8.837275324641074900, 8.743649689255256900 ) ) ;
-#435 = ORIENTED_EDGE ( 'NONE', *, *, #345, .F. ) ;
-#436 = CARTESIAN_POINT ( 'NONE',  ( 47.08051799606202800, 3.750000000000000000, 13.92455064928214100 ) ) ;
-#437 = VERTEX_POINT ( 'NONE', #119 ) ;
-#438 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#439 = CARTESIAN_POINT ( 'NONE',  ( 2.901294827419132600E-016, 21.24999999999999600, 5.043637662320619200 ) ) ;
-#440 = AXIS2_PLACEMENT_3D ( 'NONE', #614, #137, #689 ) ;
-#441 = CYLINDRICAL_SURFACE ( 'NONE', #260, 2.674550649282150200 ) ;
-#442 = CONICAL_SURFACE ( 'NONE', #20, 11.24999999999999800, 0.7853981633974543900 ) ;
-#443 = TOROIDAL_SURFACE ( 'NONE', #380, 49.83051799606202800, 1.250000000000000000 ) ;
-#444 = CARTESIAN_POINT ( 'NONE',  ( 3.895311857822258500, 6.043045620787235200, 10.65291852259792500 ) ) ;
-#445 = CONICAL_SURFACE ( 'NONE', #899, 6.250000000000002700, 0.7853981633974472800 ) ;
-#446 = ORIENTED_EDGE ( 'NONE', *, *, #243, .T. ) ;
-#447 = EDGE_LOOP ( 'NONE', ( #928, #854, #595, #863, #106 ) ) ;
-#448 = AXIS2_PLACEMENT_3D ( 'NONE', #187, #182, #178 ) ;
-#449 = EDGE_LOOP ( 'NONE', ( #809, #225, #115, #511 ) ) ;
-#450 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.387778780781445200E-016, 1.000000000000000000 ) ) ;
-#451 = DIRECTION ( 'NONE',  ( 1.249748953620007900E-014, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#452 = DIRECTION ( 'NONE',  ( 0.9985473847554023900, 0.0000000000000000000, -0.05388061245147623300 ) ) ;
-#453 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#454 = FACE_OUTER_BOUND ( 'NONE', #224, .T. ) ;
-#455 = TOROIDAL_SURFACE ( 'NONE', #584, 8.749999999999998200, 0.5000000000000000000 ) ;
-#456 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#457 = TOROIDAL_SURFACE ( 'NONE', #322, 1.424550649282150200, 1.250000000000000000 ) ;
-#458 = DIRECTION ( 'NONE',  ( 0.05388061245147619800, -3.593656445351642100E-016, 0.9985473847554026100 ) ) ;
-#459 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, 2.674550649282142300 ) ) ;
-#460 = FACE_OUTER_BOUND ( 'NONE', #210, .T. ) ;
-#461 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#462 = ORIENTED_EDGE ( 'NONE', *, *, #295, .F. ) ;
-#463 = VERTEX_POINT ( 'NONE', #130 ) ;
-#464 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.7071067811865482400, 0.7071067811865469100 ) ) ;
-#465 = AXIS2_PLACEMENT_3D ( 'NONE', #527, #524, #523 ) ;
-#466 = CARTESIAN_POINT ( 'NONE',  ( 2.677615429912735500, 1.517766952966373300, 11.23965182088002700 ) ) ;
-#467 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.165560703508817100E-016, -1.000000000000000000 ) ) ;
-#468 = FACE_OUTER_BOUND ( 'NONE', #75, .T. ) ;
-#469 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#470 = ADVANCED_FACE ( 'NONE', ( #474 ), #490, .T. ) ;
-#471 = CYLINDRICAL_SURFACE ( 'NONE', #930, 11.24999999999999800 ) ;
-#472 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.749999999999999100, 8.924550649282144500 ) ) ;
-#473 = CARTESIAN_POINT ( 'NONE',  ( 3.903977974130530700, 5.992400827412389200, 10.79226630297619700 ) ) ;
-#474 = FACE_OUTER_BOUND ( 'NONE', #233, .T. ) ;
-#475 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#476 = FACE_OUTER_BOUND ( 'NONE', #776, .T. ) ;
-#477 = ORIENTED_EDGE ( 'NONE', *, *, #18, .T. ) ;
-#478 = CARTESIAN_POINT ( 'NONE',  ( -2.601316260716855400, 3.749999999999725600, 2.052960038585963900 ) ) ;
-#479 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#480 = ADVANCED_FACE ( 'NONE', ( #476 ), #445, .F. ) ;
-#481 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #730 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #13, #557, #91 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#482 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#483 = ADVANCED_FACE ( 'NONE', ( #488 ), #442, .T. ) ;
-#484 = CARTESIAN_POINT ( 'NONE',  ( 2.601316260716855400, 1.517766952966369300, 2.052960038585963900 ) ) ;
-#485 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#486 = FACE_OUTER_BOUND ( 'NONE', #871, .T. ) ;
-#487 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#488 = FACE_OUTER_BOUND ( 'NONE', #39, .T. ) ;
-#489 = AXIS2_PLACEMENT_3D ( 'NONE', #908, #360, #596 ) ;
-#490 = TOROIDAL_SURFACE ( 'NONE', #814, 1.424550649282150200, 1.250000000000000000 ) ;
-#491 = VERTEX_POINT ( 'NONE', #40 ) ;
-#492 = EDGE_LOOP ( 'NONE', ( #513, #323, #825, #810 ) ) ;
-#493 = EDGE_LOOP ( 'NONE', ( #791, #244, #185, #573 ) ) ;
-#494 = CARTESIAN_POINT ( 'NONE',  ( -1.085301110418318600, 3.749999999999999100, 8.829599105608446400 ) ) ;
-#495 = SURFACE_STYLE_USAGE ( .BOTH. , #917 ) ;
-#496 = CARTESIAN_POINT ( 'NONE',  ( 1.837840112959474100, 3.749999999999998700, 13.77341742563354800 ) ) ;
-#497 = FACE_OUTER_BOUND ( 'NONE', #613, .T. ) ;
-#498 = TOROIDAL_SURFACE ( 'NONE', #761, 49.83051799606202800, 1.250000000000000000 ) ;
-#499 = FACE_OUTER_BOUND ( 'NONE', #522, .T. ) ;
-#500 = AXIS2_PLACEMENT_3D ( 'NONE', #68, #758, #372 ) ;
-#501 = CIRCLE ( 'NONE', #611, 2.500000000000000400 ) ;
-#502 = DIRECTION ( 'NONE',  ( -0.1227878039689732100, -0.7071067811865473500, 0.6963642403200190900 ) ) ;
-#503 = ORIENTED_EDGE ( 'NONE', *, *, #65, .T. ) ;
-#504 = EDGE_LOOP ( 'NONE', ( #62, #183, #462, #435, #14 ) ) ;
-#505 = EDGE_LOOP ( 'NONE', ( #320, #251, #87, #719 ) ) ;
-#506 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 0.3054636362436686200 ) ) ;
-#507 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #254, #229 ) ;
-#508 = CIRCLE ( 'NONE', #665, 10.88388347648317900 ) ;
-#509 = CIRCLE ( 'NONE', #514, 1.250000000000000200 ) ;
-#510 = CIRCLE ( 'NONE', #465, 1.249999999999999600 ) ;
-#511 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ;
-#512 = CARTESIAN_POINT ( 'NONE',  ( -1.429431198968483800, 1.517766952966376200, 11.30700258644437100 ) ) ;
-#513 = ORIENTED_EDGE ( 'NONE', *, *, #866, .F. ) ;
-#514 = AXIS2_PLACEMENT_3D ( 'NONE', #466, #458, #452 ) ;
-#515 = CIRCLE ( 'NONE', #409, 1.249999999999999800 ) ;
-#516 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.621509277121385100E-016, 1.000000000000000000 ) ) ;
-#517 = CIRCLE ( 'NONE', #559, 51.08051799606202100 ) ;
-#518 = CIRCLE ( 'NONE', #281, 1.250000000000000400 ) ;
-#519 = CIRCLE ( 'NONE', #338, 1.249999999999999600 ) ;
-#520 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#521 = ORIENTED_EDGE ( 'NONE', *, *, #142, .T. ) ;
-#522 = EDGE_LOOP ( 'NONE', ( #653, #165, #446, #933 ) ) ;
-#523 = DIRECTION ( 'NONE',  ( -0.1633635655963977500, 0.0000000000000000000, -0.9865659356756806300 ) ) ;
-#524 = DIRECTION ( 'NONE',  ( 0.9865659356756808500, 1.677039674497429700E-016, -0.1633635655963977800 ) ) ;
-#525 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #789, 'design' ) ;
-#526 = VECTOR ( 'NONE', #760, 1000.000000000000000 ) ;
-#527 = CARTESIAN_POINT ( 'NONE',  ( 1.633635655963976600, 1.517766952966376200, 12.54021000603894700 ) ) ;
-#528 = LINE ( 'NONE', #875, #526 ) ;
-#529 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, 2.674550649282142300 ) ) ;
-#530 = CARTESIAN_POINT ( 'NONE',  ( -47.08051799606202800, 1.517766952966369300, 13.92455064928214100 ) ) ;
-#531 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ;
-#532 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#533 = AXIS2_PLACEMENT_3D ( 'NONE', #268, #852, #294 ) ;
-#534 = CARTESIAN_POINT ( 'NONE',  ( 1.429431198968483800, 1.517766952966372700, 11.30700258644437100 ) ) ;
-#535 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#536 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#537 = CARTESIAN_POINT ( 'NONE',  ( -1.837840112959474400, 1.517766952966376200, 13.77341742563354800 ) ) ;
-#538 = DIRECTION ( 'NONE',  ( 0.9726180588186090800, 0.0000000000000000000, -0.2324093622467060000 ) ) ;
-#539 = CARTESIAN_POINT ( 'NONE',  ( -2.601316260716855400, 21.24999999999999600, 2.052960038585963900 ) ) ;
-#540 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#541 = DIRECTION ( 'NONE',  ( 0.2324093622467061600, 9.583083854271027300E-017, 0.9726180588186090800 ) ) ;
-#542 = AXIS2_PLACEMENT_3D ( 'NONE', #694, #289, #475 ) ;
-#543 = CARTESIAN_POINT ( 'NONE',  ( 2.927252276101572000, -1.374810744607774600E-015, 11.22618166776715800 ) ) ;
-#544 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#545 = CARTESIAN_POINT ( 'NONE',  ( 1.385543687193595100, 1.517766952966375300, 2.343471741394346400 ) ) ;
-#546 = ADVANCED_FACE ( 'NONE', ( #454 ), #46, .T. ) ;
-#547 = CARTESIAN_POINT ( 'NONE',  ( -2.927252276101572500, -1.374810744607774600E-015, 11.22618166776715800 ) ) ;
-#548 = CARTESIAN_POINT ( 'NONE',  ( -47.08051799606202800, 0.6338834764831741100, 13.92455064928214100 ) ) ;
-#549 = CARTESIAN_POINT ( 'NONE',  ( 3.560214963783527000, 0.6338834764831827700, 11.19202763783137300 ) ) ;
-#550 = AXIS2_PLACEMENT_3D ( 'NONE', #143, #139, #135 ) ;
-#551 = CARTESIAN_POINT ( 'NONE',  ( -1.429431198968483800, 0.0000000000000000000, 11.30700258644437100 ) ) ;
-#552 = ADVANCED_FACE ( 'NONE', ( #468 ), #441, .T. ) ;
-#553 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000900, 13.92455064928213900 ) ) ;
-#554 = VERTEX_POINT ( 'NONE', #603 ) ;
-#555 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#556 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, -7.806255641895631900E-015 ) ) ;
-#557 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#558 = PRESENTATION_STYLE_ASSIGNMENT (( #826 ) ) ;
-#559 = AXIS2_PLACEMENT_3D ( 'NONE', #436, #383, #367 ) ;
-#560 = PRODUCT ( 'Barrel_Lock', 'Barrel_Lock', '', ( #237 ) ) ;
-#561 = SURFACE_STYLE_FILL_AREA ( #879 ) ;
-#562 = CIRCLE ( 'NONE', #179, 50.71440147254519800 ) ;
-#563 = EDGE_LOOP ( 'NONE', ( #307, #410, #377, #931 ) ) ;
-#564 = ORIENTED_EDGE ( 'NONE', *, *, #285, .T. ) ;
-#565 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#566 = CIRCLE ( 'NONE', #234, 2.133883476483180400 ) ;
-#567 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#568 = CIRCLE ( 'NONE', #874, 10.88388347648317900 ) ;
-#569 = TOROIDAL_SURFACE ( 'NONE', #916, 1.249999999999999100, 1.250000000000000000 ) ;
-#570 = FACE_OUTER_BOUND ( 'NONE', #563, .T. ) ;
-#571 = ORIENTED_EDGE ( 'NONE', *, *, #18, .F. ) ;
-#572 = ORIENTED_EDGE ( 'NONE', *, *, #28, .F. ) ;
-#573 = ORIENTED_EDGE ( 'NONE', *, *, #95, .F. ) ;
-#574 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#575 = AXIS2_PLACEMENT_3D ( 'NONE', #891, #706, #768 ) ;
-#576 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353500E-016, -1.000000000000000000 ) ) ;
-#577 = CONICAL_SURFACE ( 'NONE', #784, 6.250000000000002700, 0.7853981633974472800 ) ;
-#578 = CARTESIAN_POINT ( 'NONE',  ( 3.925799660857100600, 5.639248697864715600, 11.17230105531567700 ) ) ;
-#579 = LINE ( 'NONE', #375, #605 ) ;
-#580 = LINE ( 'NONE', #23, #581 ) ;
-#581 = VECTOR ( 'NONE', #943, 1000.000000000000100 ) ;
-#582 = EDGE_LOOP ( 'NONE', ( #612, #842, #642, #503, #684, #374, #5 ) ) ;
-#583 = DIRECTION ( 'NONE',  ( -0.1155154850320268100, 0.7071067811865433500, 0.6976074632039293000 ) ) ;
-#584 = AXIS2_PLACEMENT_3D ( 'NONE', #378, #213, #467 ) ;
-#585 = CARTESIAN_POINT ( 'NONE',  ( 3.876668593174382100, 6.042740115036440200, 10.37434770096246000 ) ) ;
-#586 = DIRECTION ( 'NONE',  ( 0.1633635655963977500, 0.0000000000000000000, -0.9865659356756806300 ) ) ;
-#587 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#588 = FACE_OUTER_BOUND ( 'NONE', #278, .T. ) ;
-#589 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.387778780781445200E-016, 1.000000000000000000 ) ) ;
-#590 = VECTOR ( 'NONE', #700, 1000.000000000000100 ) ;
-#591 = LINE ( 'NONE', #543, #590 ) ;
-#592 = DIRECTION ( 'NONE',  ( 0.9865659356756808500, 7.187312890703271100E-017, 0.1633635655963977800 ) ) ;
-#593 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
-#594 = AXIS2_PLACEMENT_3D ( 'NONE', #126, #123, #120 ) ;
-#595 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ;
-#596 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#597 = ORIENTED_EDGE ( 'NONE', *, *, #67, .T. ) ;
-#598 = CARTESIAN_POINT ( 'NONE',  ( -1.633635655963981100, 1.517766952966376200, 12.54021000603897200 ) ) ;
-#599 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#600 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6338834764831854400, 0.3661165235168124500 ) ) ;
-#601 = ADVANCED_FACE ( 'NONE', ( #460 ), #419, .T. ) ;
-#602 = CARTESIAN_POINT ( 'NONE',  ( 2.601316260716855400, 1.000000000000000900, 2.052960038585963900 ) ) ;
-#603 = CARTESIAN_POINT ( 'NONE',  ( -1.778030012254011100, 0.6338834764831986500, 13.41221933504386100 ) ) ;
-#604 = CIRCLE ( 'NONE', #731, 2.133883476483177300 ) ;
-#605 = VECTOR ( 'NONE', #937, 1000.000000000000100 ) ;
-#606 = CARTESIAN_POINT ( 'NONE',  ( -1.674476547363074100, -1.565937674834944800E-015, 12.78685148995785200 ) ) ;
-#607 = VECTOR ( 'NONE', #772, 1000.000000000000100 ) ;
-#608 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#609 = CIRCLE ( 'NONE', #683, 50.71440147254521200 ) ;
-#610 = ORIENTED_EDGE ( 'NONE', *, *, #351, .F. ) ;
-#611 = AXIS2_PLACEMENT_3D ( 'NONE', #348, #342, #292 ) ;
-#612 = ORIENTED_EDGE ( 'NONE', *, *, #208, .T. ) ;
-#613 = EDGE_LOOP ( 'NONE', ( #764, #42, #76, #116 ) ) ;
-#614 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.517766952966376200, 1.249999999999992000 ) ) ;
-#615 = CARTESIAN_POINT ( 'NONE',  ( 3.275379891800851500E-016, 3.750000000000000000, 5.349101298564284500 ) ) ;
-#616 = CARTESIAN_POINT ( 'NONE',  ( -1.674476547363074100, -1.565937674834944800E-015, 12.78685148995785200 ) ) ;
-#617 = LINE ( 'NONE', #602, #607 ) ;
-#618 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#619 = ADVANCED_FACE ( 'NONE', ( #432 ), #457, .T. ) ;
-#620 = CIRCLE ( 'NONE', #635, 2.500000000000000400 ) ;
-#621 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#622 = VECTOR ( 'NONE', #196, 1000.000000000000000 ) ;
-#623 = DIRECTION ( 'NONE',  ( 0.9985473847554023900, 0.0000000000000000000, 0.05388061245147621900 ) ) ;
-#624 = LINE ( 'NONE', #220, #622 ) ;
-#625 = ORIENTED_EDGE ( 'NONE', *, *, #276, .F. ) ;
-#626 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -3.275379891800850500E-016, 2.674550649282141800 ) ) ;
-#627 = ORIENTED_EDGE ( 'NONE', *, *, #325, .F. ) ;
-#628 = VERTEX_POINT ( 'NONE', #537 ) ;
-#629 = ADVANCED_FACE ( 'NONE', ( #433 ), #443, .T. ) ;
-#630 = AXIS2_PLACEMENT_3D ( 'NONE', #634, #161, #714 ) ;
-#631 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#632 = CARTESIAN_POINT ( 'NONE',  ( -2.245224718312507600, 0.6338834764831851000, 2.138048946324489400 ) ) ;
-#633 = ADVANCED_FACE ( 'NONE', ( #416 ), #404, .T. ) ;
-#634 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#635 = AXIS2_PLACEMENT_3D ( 'NONE', #534, #894, #618 ) ;
-#636 = VECTOR ( 'NONE', #752, 1000.000000000000000 ) ;
-#637 = CIRCLE ( 'NONE', #832, 2.308434125765329400 ) ;
-#638 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#639 = CIRCLE ( 'NONE', #489, 2.500000000000000400 ) ;
-#640 = VERTEX_POINT ( 'NONE', #282 ) ;
-#641 = VERTEX_POINT ( 'NONE', #839 ) ;
-#642 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ;
-#643 = ORIENTED_EDGE ( 'NONE', *, *, #816, .F. ) ;
-#644 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#645 = CARTESIAN_POINT ( 'NONE',  ( 3.920824830466257200, 5.725031666063959100, 11.08010455549207100 ) ) ;
-#646 = CYLINDRICAL_SURFACE ( 'NONE', #575, 2.500000000000000400 ) ;
-#647 = LINE ( 'NONE', #677, #636 ) ;
-#648 = AXIS2_PLACEMENT_3D ( 'NONE', #843, #382, #905 ) ;
-#649 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#650 = VECTOR ( 'NONE', #152, 1000.000000000000000 ) ;
-#651 = LINE ( 'NONE', #150, #650 ) ;
-#652 = ORIENTED_EDGE ( 'NONE', *, *, #227, .T. ) ;
-#653 = ORIENTED_EDGE ( 'NONE', *, *, #238, .T. ) ;
-#654 = AXIS2_PLACEMENT_3D ( 'NONE', #105, #103, #101 ) ;
-#655 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.033010484478849700E-016, -1.000000000000000000 ) ) ;
-#656 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, 1.165560703508817100E-016 ) ) ;
-#657 = CIRCLE ( 'NONE', #533, 11.24999999999999800 ) ;
-#658 = FACE_OUTER_BOUND ( 'NONE', #924, .T. ) ;
-#659 = VECTOR ( 'NONE', #485, 1000.000000000000000 ) ;
-#660 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 5.896446609406726900, 2.674550649282142300 ) ) ;
-#661 = VERTEX_POINT ( 'NONE', #206 ) ;
-#662 = ORIENTED_EDGE ( 'NONE', *, *, #335, .F. ) ;
-#663 = EDGE_LOOP ( 'NONE', ( #739, #857, #564, #127 ) ) ;
-#664 = CARTESIAN_POINT ( 'NONE',  ( 3.915597401993800000, 5.810765839690880300, 10.98787274661549600 ) ) ;
-#665 = AXIS2_PLACEMENT_3D ( 'NONE', #270, #265, #258 ) ;
-#666 = DIRECTION ( 'NONE',  ( -0.05388061245147624700, -3.953022089886798600E-016, 0.9985473847554026100 ) ) ;
-#667 = CIRCLE ( 'NONE', #365, 51.08051799606202800 ) ;
-#668 = VECTOR ( 'NONE', #197, 1000.000000000000000 ) ;
-#669 = CIRCLE ( 'NONE', #428, 51.08051799606202800 ) ;
-#670 = EDGE_CURVE ( 'NONE', #491, #346, #418, .T. ) ;
-#671 = CIRCLE ( 'NONE', #304, 2.674550649282150200 ) ;
-#672 = ORIENTED_EDGE ( 'NONE', *, *, #319, .T. ) ;
-#673 = EDGE_LOOP ( 'NONE', ( #194, #778, #833, #898 ) ) ;
-#674 = CARTESIAN_POINT ( 'NONE',  ( -2.677615429912736400, 1.517766952966372700, 11.23965182088002700 ) ) ;
-#675 = VERTEX_POINT ( 'NONE', #942 ) ;
-#676 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #726, #525 ) ;
-#677 = CARTESIAN_POINT ( 'NONE',  ( -1.837840112959474400, 21.24999999999999600, 13.77341742563354800 ) ) ;
-#678 = VECTOR ( 'NONE', #644, 1000.000000000000000 ) ;
-#679 = CARTESIAN_POINT ( 'NONE',  ( 3.088337359609996700E-016, 21.24999999999999600, 5.043637662320619200 ) ) ;
-#680 = LINE ( 'NONE', #425, #659 ) ;
-#681 = LINE ( 'NONE', #886, #678 ) ;
-#682 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#683 = AXIS2_PLACEMENT_3D ( 'NONE', #548, #631, #946 ) ;
-#684 = ORIENTED_EDGE ( 'NONE', *, *, #45, .T. ) ;
-#685 = ORIENTED_EDGE ( 'NONE', *, *, #190, .T. ) ;
-#686 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#687 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.165560703508817100E-016 ) ) ;
-#688 = CARTESIAN_POINT ( 'NONE',  ( -1.429431198968483800, 0.6338834764831857700, 11.30700258644437100 ) ) ;
-#689 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#690 = LINE ( 'NONE', #824, #668 ) ;
-#691 = CARTESIAN_POINT ( 'NONE',  ( -1.953169735326209900, 3.752143779633990500, 13.75152665986518300 ) ) ;
-#692 = VECTOR ( 'NONE', #502, 1000.000000000000100 ) ;
-#693 = CONICAL_SURFACE ( 'NONE', #925, 51.08051799606202100, 0.7853981633974552700 ) ;
-#694 = CARTESIAN_POINT ( 'NONE',  ( 1.429431198968483800, 0.0000000000000000000, 11.30700258644437100 ) ) ;
-#695 = CIRCLE ( 'NONE', #102, 9.103553390593269500 ) ;
-#696 = ORIENTED_EDGE ( 'NONE', *, *, #243, .F. ) ;
-#697 = ADVANCED_FACE ( 'NONE', ( #406 ), #387, .T. ) ;
-#698 = AXIS2_PLACEMENT_3D ( 'NONE', #944, #540, #901 ) ;
-#699 = VERTEX_POINT ( 'NONE', #286 ) ;
-#700 = DIRECTION ( 'NONE',  ( 0.7060796270966421800, 0.7071067811865429100, -0.03809934643892261300 ) ) ;
-#701 = CARTESIAN_POINT ( 'NONE',  ( 1.628698201898232600, -2.798770321599037900E-016, 2.285369400832673000 ) ) ;
-#702 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#703 = ADVANCED_FACE ( 'NONE', ( #393 ), #455, .T. ) ;
-#704 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.224646799147353500E-016, -1.000000000000000000 ) ) ;
-#705 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #72, #69 ) ;
-#706 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#707 = LINE ( 'NONE', #434, #692 ) ;
-#708 = CARTESIAN_POINT ( 'NONE',  ( -1.628698201898232600, -2.798770321599037900E-016, 2.285369400832673000 ) ) ;
-#709 = CIRCLE ( 'NONE', #200, 11.24999999999999600 ) ;
-#710 = ADVANCED_FACE ( 'NONE', ( #408 ), #373, .T. ) ;
-#711 = FACE_OUTER_BOUND ( 'NONE', #449, .T. ) ;
-#712 = CYLINDRICAL_SURFACE ( 'NONE', #56, 2.500000000000000400 ) ;
-#713 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ;
-#714 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#715 = CIRCLE ( 'NONE', #11, 8.396446609406725200 ) ;
-#716 = FACE_OUTER_BOUND ( 'NONE', #37, .T. ) ;
-#717 = CIRCLE ( 'NONE', #249, 0.5000000000000004400 ) ;
-#718 = VECTOR ( 'NONE', #802, 1000.000000000000100 ) ;
-#719 = ORIENTED_EDGE ( 'NONE', *, *, #767, .T. ) ;
-#720 = EDGE_CURVE ( 'NONE', #491, #641, #389, .T. ) ;
-#721 = ORIENTED_EDGE ( 'NONE', *, *, #231, .T. ) ;
-#722 = DIRECTION ( 'NONE',  ( 0.1736481776669306900, 6.938893903907222100E-015, -0.9848077530122080200 ) ) ;
-#723 = CARTESIAN_POINT ( 'NONE',  ( 3.910116291027952300, 5.896446609406733200, 10.89560136838248300 ) ) ;
-#724 = TOROIDAL_SURFACE ( 'NONE', #157, 1.250000000000001300, 1.250000000000000000 ) ;
-#725 = VECTOR ( 'NONE', #865, 1000.000000000000000 ) ;
-#726 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #560, .NOT_KNOWN. ) ;
-#727 = LINE ( 'NONE', #868, #718 ) ;
-#728 = FACE_OUTER_BOUND ( 'NONE', #858, .T. ) ;
-#729 = VECTOR ( 'NONE', #66, 1000.000000000000000 ) ;
-#730 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #13, 'distance_accuracy_value', 'NONE');
-#731 = AXIS2_PLACEMENT_3D ( 'NONE', #909, #386, #112 ) ;
-#732 = CARTESIAN_POINT ( 'NONE',  ( -47.08051799606202800, 1.000000000000000900, 13.92455064928214100 ) ) ;
-#733 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#734 = CARTESIAN_POINT ( 'NONE',  ( 47.08051799606202800, 0.6338834764831811100, 13.92455064928214100 ) ) ;
-#735 = LINE ( 'NONE', #869, #725 ) ;
-#736 = CIRCLE ( 'NONE', #887, 2.369087013038475600 ) ;
-#737 = CIRCLE ( 'NONE', #850, 1.499999999999984000 ) ;
-#738 = CIRCLE ( 'NONE', #801, 50.08051799606201400 ) ;
-#739 = ORIENTED_EDGE ( 'NONE', *, *, #301, .F. ) ;
-#740 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#741 = ORIENTED_EDGE ( 'NONE', *, *, #248, .T. ) ;
-#742 = AXIS2_PLACEMENT_3D ( 'NONE', #221, #769, #296 ) ;
-#743 = CONICAL_SURFACE ( 'NONE', #390, 11.24999999999999800, 0.7853981633974543900 ) ;
-#744 = CIRCLE ( 'NONE', #550, 2.674550649282142300 ) ;
-#745 = CIRCLE ( 'NONE', #654, 1.499999999999985800 ) ;
-#746 = AXIS2_PLACEMENT_3D ( 'NONE', #55, #52, #43 ) ;
-#747 = CIRCLE ( 'NONE', #746, 1.674550649282136000 ) ;
-#748 = DIRECTION ( 'NONE',  ( -0.9848077530122081300, 2.023974921244920400E-017, -0.1736481776669308300 ) ) ;
-#749 = ORIENTED_EDGE ( 'NONE', *, *, #92, .T. ) ;
-#750 = ORIENTED_EDGE ( 'NONE', *, *, #45, .F. ) ;
-#751 = ORIENTED_EDGE ( 'NONE', *, *, #4, .F. ) ;
-#752 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#753 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 2.024222016480529400E-032 ) ) ;
-#754 = CARTESIAN_POINT ( 'NONE',  ( -47.08051799606202800, 1.517766952966369300, 13.92455064928214100 ) ) ;
-#755 = CIRCLE ( 'NONE', #594, 2.674550649282142300 ) ;
-#756 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Barrel_Lock', ( #297, #630 ), #192 ) ;
-#757 = CYLINDRICAL_SURFACE ( 'NONE', #507, 2.674550649282150200 ) ;
-#758 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -1.165560703508817100E-016 ) ) ;
-#759 = CIRCLE ( 'NONE', #448, 10.24999999999998200 ) ;
-#760 = DIRECTION ( 'NONE',  ( 0.7060796270966420700, -0.7071067811865431300, 0.03809934643892261300 ) ) ;
-#761 = AXIS2_PLACEMENT_3D ( 'NONE', #277, #358, #217 ) ;
-#762 = CIRCLE ( 'NONE', #705, 50.08051799606201400 ) ;
-#763 = VERTEX_POINT ( 'NONE', #616 ) ;
-#764 = ORIENTED_EDGE ( 'NONE', *, *, #767, .F. ) ;
-#765 = ORIENTED_EDGE ( 'NONE', *, *, #189, .T. ) ;
-#766 = ADVANCED_FACE ( 'NONE', ( #385 ), #355, .T. ) ;
-#767 = EDGE_CURVE ( 'NONE', #860, #641, #356, .T. ) ;
-#768 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#769 = DIRECTION ( 'NONE',  ( 0.2324093622467061400, 4.791541927135508100E-017, -0.9726180588186091900 ) ) ;
-#770 = FACE_OUTER_BOUND ( 'NONE', #492, .T. ) ;
-#771 = CIRCLE ( 'NONE', #266, 2.674550649282142300 ) ;
-#772 = DIRECTION ( 'NONE',  ( -0.6877448248951392200, -0.7071067811865428000, 0.1643382360558877400 ) ) ;
-#773 = FACE_OUTER_BOUND ( 'NONE', #138, .T. ) ;
-#774 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.517766952966376200, 2.674550649282141800 ) ) ;
-#775 = VECTOR ( 'NONE', #298, 1000.000000000000000 ) ;
-#776 = EDGE_LOOP ( 'NONE', ( #128, #902, #779, #521 ) ) ;
-#777 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #560 ) ) ;
-#778 = ORIENTED_EDGE ( 'NONE', *, *, #212, .F. ) ;
-#779 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ;
-#780 = ADVANCED_FACE ( 'NONE', ( #430 ), #353, .T. ) ;
-#781 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.7071067811865431300, 0.7071067811865517900 ) ) ;
-#782 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #89, 'distance_accuracy_value', 'NONE');
-#783 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#784 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #599, #589 ) ;
-#785 = LINE ( 'NONE', #35, #729 ) ;
-#786 = FACE_OUTER_BOUND ( 'NONE', #205, .T. ) ;
-#787 = CIRCLE ( 'NONE', #121, 6.250000000000002700 ) ;
-#788 = CIRCLE ( 'NONE', #171, 51.08051799606202100 ) ;
-#789 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#790 = VERTEX_POINT ( 'NONE', #388 ) ;
-#791 = ORIENTED_EDGE ( 'NONE', *, *, #4, .T. ) ;
-#792 = EDGE_LOOP ( 'NONE', ( #362, #903, #625, #878 ) ) ;
-#793 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #392, #431, #427, #384 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 4 ),
- ( 3.029560852386037800E-007, 0.003204214415673896300 ),
- .UNSPECIFIED. ) ;
-#794 = AXIS2_PLACEMENT_3D ( 'NONE', #300, #849, #396 ) ;
-#795 = LINE ( 'NONE', #439, #775 ) ;
-#796 = VECTOR ( 'NONE', #464, 999.9999999999998900 ) ;
-#797 = CIRCLE ( 'NONE', #932, 6.250000000000002700 ) ;
-#798 = LINE ( 'NONE', #472, #796 ) ;
-#799 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ;
-#800 = EDGE_LOOP ( 'NONE', ( #919, #652, #721, #935 ) ) ;
-#801 = AXIS2_PLACEMENT_3D ( 'NONE', #32, #21, #17 ) ;
-#802 = DIRECTION ( 'NONE',  ( 0.1736481776669308000, 8.496542519014334800E-017, -0.9848077530122080200 ) ) ;
-#803 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #822, 'distance_accuracy_value', 'NONE');
-#804 = VECTOR ( 'NONE', #536, 1000.000000000000000 ) ;
-#805 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#806 = CARTESIAN_POINT ( 'NONE',  ( 1.429431198968483800, 21.24999999999999600, 11.30700258644437100 ) ) ;
-#807 = CONICAL_SURFACE ( 'NONE', #867, 1.499999999999985800, 0.7853981633974547200 ) ;
-#808 = CIRCLE ( 'NONE', #906, 2.674550649282142300 ) ;
-#809 = ORIENTED_EDGE ( 'NONE', *, *, #256, .F. ) ;
-#810 = ORIENTED_EDGE ( 'NONE', *, *, #295, .T. ) ;
-#811 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#812 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#813 = LINE ( 'NONE', #539, #804 ) ;
-#814 = AXIS2_PLACEMENT_3D ( 'NONE', #125, #186, #78 ) ;
-#815 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#816 = EDGE_CURVE ( 'NONE', #94, #763, #415, .T. ) ;
-#817 = VECTOR ( 'NONE', #532, 1000.000000000000000 ) ;
-#818 = EDGE_CURVE ( 'NONE', #860, #346, #368, .T. ) ;
-#819 = CIRCLE ( 'NONE', #24, 8.396446609406725200 ) ;
-#820 = LINE ( 'NONE', #556, #817 ) ;
-#821 = VECTOR ( 'NONE', #583, 1000.000000000000000 ) ;
-#822 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#823 = VERTEX_POINT ( 'NONE', #701 ) ;
-#824 = CARTESIAN_POINT ( 'NONE',  ( 2.601316260716855400, 21.24999999999999600, 2.052960038585963900 ) ) ;
-#825 = ORIENTED_EDGE ( 'NONE', *, *, #276, .T. ) ;
-#826 = SURFACE_STYLE_USAGE ( .BOTH. , #827 ) ;
-#827 = SURFACE_SIDE_STYLE ('',( #561 ) ) ;
-#828 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.165560703508817100E-016, 1.000000000000000000 ) ) ;
-#829 = LINE ( 'NONE', #606, #821 ) ;
-#830 = DIRECTION ( 'NONE',  ( 1.598721155460225700E-014, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#831 = FACE_OUTER_BOUND ( 'NONE', #493, .T. ) ;
-#832 = AXIS2_PLACEMENT_3D ( 'NONE', #907, #904, #897 ) ;
-#833 = ORIENTED_EDGE ( 'NONE', *, *, #350, .F. ) ;
-#834 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #53, #940, #585, #444, #473, #399 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 2, 4 ),
- ( 1.939479807224432100E-018, 0.0004171662241345390100, 0.0008343324482690760700 ),
- .UNSPECIFIED. ) ;
-#835 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#836 = ORIENTED_EDGE ( 'NONE', *, *, #33, .T. ) ;
-#837 = ORIENTED_EDGE ( 'NONE', *, *, #86, .F. ) ;
-#838 = ORIENTED_EDGE ( 'NONE', *, *, #670, .F. ) ;
-#839 = CARTESIAN_POINT ( 'NONE',  ( -2.601316260716855400, 1.517766952966376200, 2.052960038585963900 ) ) ;
-#840 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#841 = VERTEX_POINT ( 'NONE', #226 ) ;
-#842 = ORIENTED_EDGE ( 'NONE', *, *, #212, .T. ) ;
-#843 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.517766952966376200, 2.674550649282142300 ) ) ;
-#844 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ;
-#845 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6338834764831845500, 2.674550649282141800 ) ) ;
-#846 = AXIS2_PLACEMENT_3D ( 'NONE', #626, #151, #704 ) ;
-#847 = VERTEX_POINT ( 'NONE', #80 ) ;
-#848 = VERTEX_POINT ( 'NONE', #549 ) ;
-#849 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#850 = AXIS2_PLACEMENT_3D ( 'NONE', #7, #1, #576 ) ;
-#851 = ADVANCED_FACE ( 'NONE', ( #369 ), #371, .T. ) ;
-#852 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#853 = ORIENTED_EDGE ( 'NONE', *, *, #50, .T. ) ;
-#854 = ORIENTED_EDGE ( 'NONE', *, *, #818, .T. ) ;
-#855 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.750000000000000000, -8.673617379884035500E-016 ) ) ;
-#856 = ORIENTED_EDGE ( 'NONE', *, *, #124, .F. ) ;
-#857 = ORIENTED_EDGE ( 'NONE', *, *, #309, .T. ) ;
-#858 = EDGE_LOOP ( 'NONE', ( #696, #424, #349, #88 ) ) ;
-#859 = FILL_AREA_STYLE_COLOUR ( '', #316 ) ;
-#860 = VERTEX_POINT ( 'NONE', #632 ) ;
-#861 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 21.24999999999999600, 2.674550649282144000 ) ) ;
-#862 = AXIS2_PLACEMENT_3D ( 'NONE', #283, #198, #191 ) ;
-#863 = ORIENTED_EDGE ( 'NONE', *, *, #256, .T. ) ;
-#864 = ORIENTED_EDGE ( 'NONE', *, *, #219, .F. ) ;
-#865 = DIRECTION ( 'NONE',  ( -0.1227878039689731800, 0.7071067811865473500, 0.6963642403200190900 ) ) ;
-#866 = EDGE_CURVE ( 'NONE', #94, #841, #352, .T. ) ;
-#867 = AXIS2_PLACEMENT_3D ( 'NONE', #551, #593, #555 ) ;
-#868 = CARTESIAN_POINT ( 'NONE',  ( 0.4644308463257504300, 3.750000000000001300, 0.04063243404525468400 ) ) ;
-#869 = CARTESIAN_POINT ( 'NONE',  ( 0.01515520107921251200, -2.587275324641070000, 2.588601232928956700 ) ) ;
-#870 = VERTEX_POINT ( 'NONE', #155 ) ;
-#871 = EDGE_LOOP ( 'NONE', ( #911, #765, #844, #872, #685 ) ) ;
-#872 = ORIENTED_EDGE ( 'NONE', *, *, #136, .F. ) ;
-#873 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #496, #250, #177, #175, #172, #168, #163, #109, #100, #97, #93, #38, #34, #31, #30, #25 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 2, 2, 2, 2, 2, 2, 4 ),
- ( 0.0000000000000000000, 0.0005236541747375794700, 0.001047308349475158900, 0.001570962524212738500, 0.002094616698950317900, 0.003141925048425479200, 0.003665579223163061800, 0.004189233397900643500 ),
- .UNSPECIFIED. ) ;
-#874 = AXIS2_PLACEMENT_3D ( 'NONE', #845, #840, #830 ) ;
-#875 = CARTESIAN_POINT ( 'NONE',  ( -3.925799660856989600, 1.000000000000000900, 11.17230105531568200 ) ) ;
-#876 = FILL_AREA_STYLE_COLOUR ( '', #587 ) ;
-#877 = VERTEX_POINT ( 'NONE', #708 ) ;
-#878 = ORIENTED_EDGE ( 'NONE', *, *, #111, .F. ) ;
-#879 = FILL_AREA_STYLE ('',( #876 ) ) ;
-#880 = VERTEX_POINT ( 'NONE', #303 ) ;
-#881 = EDGE_LOOP ( 'NONE', ( #900, #597, #16, #749, #713 ) ) ;
-#882 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #336, #340, #330, #326 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 4 ),
- ( 4.336808689942017700E-019, 0.0001174083609130904500 ),
- .UNSPECIFIED. ) ;
-#883 = VERTEX_POINT ( 'NONE', #914 ) ;
-#884 = AXIS2_PLACEMENT_3D ( 'NONE', #145, #544, #621 ) ;
-#885 = CARTESIAN_POINT ( 'NONE',  ( -1.519421554585644200, 5.542893218813452100, 11.29161848813896000 ) ) ;
-#886 = CARTESIAN_POINT ( 'NONE',  ( -1.953169735326209900, 3.750000000000000400, 13.75152665986518100 ) ) ;
-#887 = AXIS2_PLACEMENT_3D ( 'NONE', #861, #438, #811 ) ;
-#888 = EDGE_LOOP ( 'NONE', ( #610, #275, #913, #29, #398, #324, #837, #108 ) ) ;
-#889 = ORIENTED_EDGE ( 'NONE', *, *, #44, .T. ) ;
-#890 = ORIENTED_EDGE ( 'NONE', *, *, #107, .T. ) ;
-#891 = CARTESIAN_POINT ( 'NONE',  ( -1.429431198968483800, 21.24999999999999600, 11.30700258644437100 ) ) ;
-#892 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
- ( #723, #664, #645, #578 ),
- .UNSPECIFIED., .F., .F.,
- ( 4, 4 ),
- ( 0.0005207878175229677100, 0.0008988601766974334000 ),
- .UNSPECIFIED. ) ;
-#893 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#894 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#895 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.517766952966376200, 2.674550649282142300 ) ) ;
-#896 = ADVANCED_FACE ( 'NONE', ( #329 ), #318, .T. ) ;
-#897 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#898 = ORIENTED_EDGE ( 'NONE', *, *, #257, .F. ) ;
-#899 = AXIS2_PLACEMENT_3D ( 'NONE', #134, #63, #70 ) ;
-#900 = ORIENTED_EDGE ( 'NONE', *, *, #50, .F. ) ;
-#901 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#902 = ORIENTED_EDGE ( 'NONE', *, *, #58, .F. ) ;
-#903 = ORIENTED_EDGE ( 'NONE', *, *, #267, .T. ) ;
-#904 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#905 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#906 = AXIS2_PLACEMENT_3D ( 'NONE', #529, #520, #516 ) ;
-#907 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.6338834764831854400, 2.674550649282142300 ) ) ;
-#908 = CARTESIAN_POINT ( 'NONE',  ( -1.429431198968483800, 1.517766952966376200, 11.30700258644437100 ) ) ;
-#909 = CARTESIAN_POINT ( 'NONE',  ( 1.429431198968483800, 0.6338834764831825500, 11.30700258644437100 ) ) ;
-#910 = ADVANCED_FACE ( 'NONE', ( #339 ), #85, .T. ) ;
-#911 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ;
-#912 = CARTESIAN_POINT ( 'NONE',  ( 47.08051799606202800, 1.000000000000000900, 13.92455064928214100 ) ) ;
-#913 = ORIENTED_EDGE ( 'NONE', *, *, #136, .T. ) ;
-#914 = CARTESIAN_POINT ( 'NONE',  ( -1.837840112959474100, 3.749999999999998700, 13.77341742563354800 ) ) ;
-#915 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
-#916 = AXIS2_PLACEMENT_3D ( 'NONE', #945, #934, #893 ) ;
-#917 = SURFACE_SIDE_STYLE ('',( #315 ) ) ;
-#918 = VERTEX_POINT ( 'NONE', #855 ) ;
-#919 = ORIENTED_EDGE ( 'NONE', *, *, #22, .T. ) ;
-#920 = EDGE_LOOP ( 'NONE', ( #264, #114, #49, #531, #253, #245 ) ) ;
-#921 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ;
-#922 = AXIS2_PLACEMENT_3D ( 'NONE', #912, #12, #487 ) ;
-#923 = CLOSED_SHELL ( 'NONE', ( #619, #483, #552, #272, #633, #910, #71, #546, #601, #480, #697, #391, #79, #780, #710, #400, #228, #141, #703, #147, #766, #947, #83, #896, #6, #381, #154, #470, #851, #629, #293 ) ) ;
-#924 = EDGE_LOOP ( 'NONE', ( #395, #741, #47, #104, #306, #156 ) ) ;
-#925 = AXIS2_PLACEMENT_3D ( 'NONE', #732, #574, #649 ) ;
-#926 = ORIENTED_EDGE ( 'NONE', *, *, #92, .F. ) ;
-#927 = ORIENTED_EDGE ( 'NONE', *, *, #314, .F. ) ;
-#928 = ORIENTED_EDGE ( 'NONE', *, *, #285, .F. ) ;
-#929 = VERTEX_POINT ( 'NONE', #403 ) ;
-#930 = AXIS2_PLACEMENT_3D ( 'NONE', #146, #201, #181 ) ;
-#931 = ORIENTED_EDGE ( 'NONE', *, *, #252, .F. ) ;
-#932 = AXIS2_PLACEMENT_3D ( 'NONE', #459, #453, #450 ) ;
-#933 = ORIENTED_EDGE ( 'NONE', *, *, #176, .F. ) ;
-#934 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#935 = ORIENTED_EDGE ( 'NONE', *, *, #351, .T. ) ;
-#936 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
-#937 = DIRECTION ( 'NONE',  ( 0.6877448248951392200, -0.7071067811865428000, 0.1643382360558877400 ) ) ;
-#938 = STYLED_ITEM ( 'NONE', ( #558 ), #297 ) ;
-#939 = CIRCLE ( 'NONE', #77, 2.369087013038475600 ) ;
-#940 = CARTESIAN_POINT ( 'NONE',  ( 3.866703121128519400, 5.992010669749999100, 10.23527245001377000 ) ) ;
-#941 = ORIENTED_EDGE ( 'NONE', *, *, #866, .T. ) ;
-#942 = CARTESIAN_POINT ( 'NONE',  ( -3.925799660856987800, 1.517766952966372700, 11.17230105531568200 ) ) ;
-#943 = DIRECTION ( 'NONE',  ( 0.1155154850320268400, 0.7071067811865426900, 0.6976074632039298600 ) ) ;
-#944 = CARTESIAN_POINT ( 'NONE',  ( 47.08051799606202800, 21.24999999999999600, 13.92455064928214100 ) ) ;
-#945 = CARTESIAN_POINT ( 'NONE',  ( 1.429431198968483800, 1.517766952966372700, 11.30700258644437100 ) ) ;
-#946 = DIRECTION ( 'NONE',  ( 1.600828488918773600E-014, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#947 = ADVANCED_FACE ( 'NONE', ( #343 ), #312, .T. ) ;
-ENDSEC;
-END-ISO-10303-21;

Firearms/The_Holdout_v3.0-RollaTroll/STEP/Nail_Buffer.step

@@ -1,157 +0,0 @@
-ISO-10303-21;
-HEADER;
-FILE_DESCRIPTION (( 'STEP AP214' ),
-    '1' );
-FILE_NAME ('Nail_Buffer.step',
-    '2015-01-13T04:30:08',
-    ( '' ),
-    ( '' ),
-    'SwSTEP 2.0',
-    'SolidWorks 2015',
-    '' );
-FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
-ENDSEC;
-
-DATA;
-#1 = MANIFOLD_SOLID_BREP ( 'Revolve1', #111 ) ;
-#2 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#3 = FILL_AREA_STYLE_COLOUR ( '', #51 ) ;
-#4 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#5 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#6 = CARTESIAN_POINT ( 'NONE',  ( 5.625000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#7 = CARTESIAN_POINT ( 'NONE',  ( -5.625000000000000000, 6.888638245203861900E-016, 0.0000000000000000000 ) ) ;
-#8 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#9 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #82, 'distance_accuracy_value', 'NONE');
-#10 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#11 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#12 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#13 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Nail_Buffer', ( #1, #77 ), #138 ) ;
-#14 = SURFACE_STYLE_USAGE ( .BOTH. , #18 ) ;
-#15 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#16 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#17 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.250000000000000200 ) ) ;
-#18 = SURFACE_SIDE_STYLE ('',( #94 ) ) ;
-#19 = PLANE ( 'NONE',  #123 ) ;
-#20 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#21 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#22 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #76, 'distance_accuracy_value', 'NONE');
-#23 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #58, 'distance_accuracy_value', 'NONE');
-#24 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#25 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#26 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #30 ) ;
-#27 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#28 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#29 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#30 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#31 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.250000000000000000 ) ) ;
-#32 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #90, 'design' ) ;
-#33 = ORIENTED_EDGE ( 'NONE', *, *, #133, .F. ) ;
-#34 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #50 ) ) ;
-#35 = ORIENTED_EDGE ( 'NONE', *, *, #46, .T. ) ;
-#36 = ORIENTED_EDGE ( 'NONE', *, *, #46, .F. ) ;
-#37 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.250000000000000200 ) ) ;
-#38 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#39 = FACE_OUTER_BOUND ( 'NONE', #129, .T. ) ;
-#40 = FACE_OUTER_BOUND ( 'NONE', #120, .T. ) ;
-#41 = VERTEX_POINT ( 'NONE', #78 ) ;
-#42 = PLANE ( 'NONE',  #88 ) ;
-#43 = VERTEX_POINT ( 'NONE', #57 ) ;
-#44 = SURFACE_STYLE_FILL_AREA ( #72 ) ;
-#45 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.250000000000000000 ) ) ;
-#46 = EDGE_CURVE ( 'NONE', #71, #62, #53, .T. ) ;
-#47 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#48 = PRESENTATION_STYLE_ASSIGNMENT (( #14 ) ) ;
-#49 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#50 = STYLED_ITEM ( 'NONE', ( #105 ), #1 ) ;
-#51 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#52 = EDGE_CURVE ( 'NONE', #43, #41, #116, .T. ) ;
-#53 = CIRCLE ( 'NONE', #64, 5.625000000000000000 ) ;
-#54 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#55 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.250000000000000000 ) ) ;
-#56 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#57 = CARTESIAN_POINT ( 'NONE',  ( -5.625000000000000000, 6.888638245203861900E-016, -1.250000000000000000 ) ) ;
-#58 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#59 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#60 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#61 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#62 = VERTEX_POINT ( 'NONE', #85 ) ;
-#63 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.250000000000000000 ) ) ;
-#64 = AXIS2_PLACEMENT_3D ( 'NONE', #55, #56, #54 ) ;
-#65 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #112 ) ) ;
-#66 = AXIS2_PLACEMENT_3D ( 'NONE', #45, #49, #47 ) ;
-#67 = SURFACE_STYLE_USAGE ( .BOTH. , #70 ) ;
-#68 = FILL_AREA_STYLE_COLOUR ( '', #115 ) ;
-#69 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #90 ) ;
-#70 = SURFACE_SIDE_STYLE ('',( #44 ) ) ;
-#71 = VERTEX_POINT ( 'NONE', #79 ) ;
-#72 = FILL_AREA_STYLE ('',( #68 ) ) ;
-#73 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #50 ), #96 ) ;
-#74 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #75, #32 ) ;
-#75 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #112, .NOT_KNOWN. ) ;
-#76 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#77 = AXIS2_PLACEMENT_3D ( 'NONE', #2, #4, #93 ) ;
-#78 = CARTESIAN_POINT ( 'NONE',  ( 5.625000000000000000, 0.0000000000000000000, -1.250000000000000000 ) ) ;
-#79 = CARTESIAN_POINT ( 'NONE',  ( -5.625000000000000000, 6.888638245203861900E-016, 1.250000000000000000 ) ) ;
-#80 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#81 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#82 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#83 = ORIENTED_EDGE ( 'NONE', *, *, #52, .T. ) ;
-#84 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #27, #29 ) ;
-#85 = CARTESIAN_POINT ( 'NONE',  ( 5.625000000000000000, 0.0000000000000000000, 1.250000000000000000 ) ) ;
-#86 = EDGE_CURVE ( 'NONE', #41, #43, #97, .T. ) ;
-#87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#88 = AXIS2_PLACEMENT_3D ( 'NONE', #37, #25, #28 ) ;
-#89 = ADVANCED_FACE ( 'NONE', ( #113 ), #42, .F. ) ;
-#90 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#91 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #74 ) ;
-#92 = ORIENTED_EDGE ( 'NONE', *, *, #140, .T. ) ;
-#93 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#94 = SURFACE_STYLE_FILL_AREA ( #139 ) ;
-#95 = PRODUCT_CONTEXT ( 'NONE', #30, 'mechanical' ) ;
-#96 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #23 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #58, #60, #59 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#97 = CIRCLE ( 'NONE', #84, 5.625000000000000000 ) ;
-#98 = ADVANCED_FACE ( 'NONE', ( #39 ), #19, .F. ) ;
-#99 = VECTOR ( 'NONE', #8, 1000.000000000000000 ) ;
-#100 = CYLINDRICAL_SURFACE ( 'NONE', #121, 5.625000000000000000 ) ;
-#101 = ADVANCED_FACE ( 'NONE', ( #40 ), #100, .T. ) ;
-#102 = ORIENTED_EDGE ( 'NONE', *, *, #128, .T. ) ;
-#103 = EDGE_LOOP ( 'NONE', ( #131, #102, #110, #33 ) ) ;
-#104 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #9 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #82, #24, #61 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#105 = PRESENTATION_STYLE_ASSIGNMENT (( #67 ) ) ;
-#106 = SHAPE_DEFINITION_REPRESENTATION ( #91, #13 ) ;
-#107 = ADVANCED_FACE ( 'NONE', ( #109 ), #130, .T. ) ;
-#108 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #119 ), #104 ) ;
-#109 = FACE_OUTER_BOUND ( 'NONE', #103, .T. ) ;
-#110 = ORIENTED_EDGE ( 'NONE', *, *, #140, .F. ) ;
-#111 = CLOSED_SHELL ( 'NONE', ( #107, #89, #101, #98 ) ) ;
-#112 = PRODUCT ( 'Nail_Buffer', 'Nail_Buffer', '', ( #95 ) ) ;
-#113 = FACE_OUTER_BOUND ( 'NONE', #135, .T. ) ;
-#114 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #119 ) ) ;
-#115 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#116 = CIRCLE ( 'NONE', #66, 5.625000000000000000 ) ;
-#117 = ORIENTED_EDGE ( 'NONE', *, *, #52, .F. ) ;
-#118 = LINE ( 'NONE', #7, #99 ) ;
-#119 = STYLED_ITEM ( 'NONE', ( #48 ), #13 ) ;
-#120 = EDGE_LOOP ( 'NONE', ( #136, #83, #124, #36 ) ) ;
-#121 = AXIS2_PLACEMENT_3D ( 'NONE', #15, #21, #16 ) ;
-#122 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#123 = AXIS2_PLACEMENT_3D ( 'NONE', #17, #38, #20 ) ;
-#124 = ORIENTED_EDGE ( 'NONE', *, *, #133, .T. ) ;
-#125 = AXIS2_PLACEMENT_3D ( 'NONE', #11, #10, #12 ) ;
-#126 = AXIS2_PLACEMENT_3D ( 'NONE', #63, #80, #81 ) ;
-#127 = VECTOR ( 'NONE', #5, 1000.000000000000000 ) ;
-#128 = EDGE_CURVE ( 'NONE', #43, #71, #118, .T. ) ;
-#129 = EDGE_LOOP ( 'NONE', ( #132, #117 ) ) ;
-#130 = CYLINDRICAL_SURFACE ( 'NONE', #125, 5.625000000000000000 ) ;
-#131 = ORIENTED_EDGE ( 'NONE', *, *, #86, .T. ) ;
-#132 = ORIENTED_EDGE ( 'NONE', *, *, #86, .F. ) ;
-#133 = EDGE_CURVE ( 'NONE', #41, #62, #137, .T. ) ;
-#134 = CIRCLE ( 'NONE', #126, 5.625000000000000000 ) ;
-#135 = EDGE_LOOP ( 'NONE', ( #92, #35 ) ) ;
-#136 = ORIENTED_EDGE ( 'NONE', *, *, #128, .F. ) ;
-#137 = LINE ( 'NONE', #6, #127 ) ;
-#138 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #22 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #76, #87, #122 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#139 = FILL_AREA_STYLE ('',( #3 ) ) ;
-#140 = EDGE_CURVE ( 'NONE', #62, #71, #134, .T. ) ;
-ENDSEC;
-END-ISO-10303-21;

Firearms/The_Holdout_v3.0-RollaTroll/STEP/Sear_Rod.step

@@ -1,259 +0,0 @@
-ISO-10303-21;
-HEADER;
-FILE_DESCRIPTION (( 'STEP AP214' ),
-    '1' );
-FILE_NAME ('Sear_Rod.step',
-    '2015-01-13T04:30:13',
-    ( '' ),
-    ( '' ),
-    'SwSTEP 2.0',
-    'SolidWorks 2015',
-    '' );
-FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
-ENDSEC;
-
-DATA;
-#1 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#2 = DIRECTION ( 'NONE',  ( -1.224646799147353000E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#3 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.224646799147353200E-016 ) ) ;
-#4 = LINE ( 'NONE', #67, #224 ) ;
-#5 = CARTESIAN_POINT ( 'NONE',  ( -1.212808546753974600E-017, 1.749999999999969400, -0.09903333333320099600 ) ) ;
-#6 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.749999999999969400, 0.0000000000000000000 ) ) ;
-#7 = CARTESIAN_POINT ( 'NONE',  ( 3.827021247335478800E-016, 7.296800000000000200, 3.125000000000000000 ) ) ;
-#8 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#9 = ADVANCED_FACE ( 'NONE', ( #93 ), #24, .T. ) ;
-#10 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#11 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #191 ) ) ;
-#12 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #236, 'distance_accuracy_value', 'NONE');
-#13 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #191, .NOT_KNOWN. ) ;
-#14 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #13, #226 ) ;
-#15 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #237, #239 ) ;
-#16 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#17 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#18 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #73 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #180, #178, #177 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#19 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #23 ), #18 ) ;
-#20 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#21 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #23 ) ) ;
-#22 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.750000000000000200, 0.0000000000000000000 ) ) ;
-#23 = STYLED_ITEM ( 'NONE', ( #183 ), #168 ) ;
-#24 = CONICAL_SURFACE ( 'NONE', #61, 4.171799999999999300, 0.7853981633974539400 ) ;
-#25 = AXIS2_PLACEMENT_3D ( 'NONE', #54, #102, #214 ) ;
-#26 = AXIS2_PLACEMENT_3D ( 'NONE', #80, #242, #194 ) ;
-#27 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #95 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #205, #187, #179 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#28 = AXIS2_PLACEMENT_3D ( 'NONE', #105, #98, #103 ) ;
-#29 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #200 ) ;
-#30 = AXIS2_PLACEMENT_3D ( 'NONE', #109, #123, #49 ) ;
-#31 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#32 = AXIS2_PLACEMENT_3D ( 'NONE', #6, #159, #150 ) ;
-#33 = AXIS2_PLACEMENT_3D ( 'NONE', #31, #38, #51 ) ;
-#34 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#35 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #96, #238 ) ;
-#36 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.750000000000000200, -4.171799999999999300 ) ) ;
-#37 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#38 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#39 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #12 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #236, #162, #161 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#40 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#41 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #43 ), #39 ) ;
-#42 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #43 ) ) ;
-#43 = STYLED_ITEM ( 'NONE', ( #222 ), #101 ) ;
-#44 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #171, #170 ) ;
-#45 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.7071067811865435800, -0.7071067811865515700 ) ) ;
-#46 = AXIS2_PLACEMENT_3D ( 'NONE', #158, #157, #176 ) ;
-#47 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #10, #8 ) ;
-#48 = AXIS2_PLACEMENT_3D ( 'NONE', #85, #182, #1 ) ;
-#49 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#50 = AXIS2_PLACEMENT_3D ( 'NONE', #163, #155, #16 ) ;
-#51 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#52 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #223, #58 ) ;
-#53 = AXIS2_PLACEMENT_3D ( 'NONE', #5, #3, #2 ) ;
-#54 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.749999999999969400, 0.0000000000000000000 ) ) ;
-#55 = AXIS2_PLACEMENT_3D ( 'NONE', #22, #20, #17 ) ;
-#56 = AXIS2_PLACEMENT_3D ( 'NONE', #91, #90, #89 ) ;
-#57 = LINE ( 'NONE', #198, #219 ) ;
-#58 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#59 = AXIS2_PLACEMENT_3D ( 'NONE', #107, #108, #166 ) ;
-#60 = DIRECTION ( 'NONE',  ( 8.659560562354982200E-017, -0.7071067811865435800, 0.7071067811865515700 ) ) ;
-#61 = AXIS2_PLACEMENT_3D ( 'NONE', #234, #37, #40 ) ;
-#62 = EDGE_CURVE ( 'NONE', #131, #143, #57, .T. ) ;
-#63 = VERTEX_POINT ( 'NONE', #241 ) ;
-#64 = EDGE_CURVE ( 'NONE', #143, #186, #230, .T. ) ;
-#65 = EDGE_CURVE ( 'NONE', #131, #104, #217, .T. ) ;
-#66 = EDGE_CURVE ( 'NONE', #104, #186, #225, .T. ) ;
-#67 = CARTESIAN_POINT ( 'NONE',  ( 5.108981516682927200E-016, 1.750000000000000200, 4.171799999999999300 ) ) ;
-#68 = VERTEX_POINT ( 'NONE', #86 ) ;
-#69 = EDGE_CURVE ( 'NONE', #186, #133, #4, .T. ) ;
-#70 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#71 = EDGE_CURVE ( 'NONE', #68, #133, #228, .T. ) ;
-#72 = EDGE_CURVE ( 'NONE', #143, #68, #218, .T. ) ;
-#73 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #180, 'distance_accuracy_value', 'NONE');
-#74 = EDGE_CURVE ( 'NONE', #133, #111, #106, .T. ) ;
-#75 = EDGE_CURVE ( 'NONE', #63, #111, #88, .T. ) ;
-#76 = EDGE_CURVE ( 'NONE', #68, #63, #79, .T. ) ;
-#77 = EDGE_CURVE ( 'NONE', #133, #68, #220, .T. ) ;
-#78 = EDGE_CURVE ( 'NONE', #111, #63, #83, .T. ) ;
-#79 = CIRCLE ( 'NONE', #50, 4.270833333333199800 ) ;
-#80 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 7.296800000000000200, 0.0000000000000000000 ) ) ;
-#81 = EDGE_CURVE ( 'NONE', #186, #143, #227, .T. ) ;
-#82 = EDGE_CURVE ( 'NONE', #104, #131, #233, .T. ) ;
-#83 = CIRCLE ( 'NONE', #47, 3.796799999999999700 ) ;
-#84 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#85 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.750000000000000200, 0.0000000000000000000 ) ) ;
-#86 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.750000000000000200, -4.171799999999998400 ) ) ;
-#87 = VECTOR ( 'NONE', #45, 1000.000000000000000 ) ;
-#88 = CIRCLE ( 'NONE', #52, 3.796799999999999700 ) ;
-#89 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#90 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#91 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 7.296800000000000200, 0.0000000000000000000 ) ) ;
-#92 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#93 = FACE_OUTER_BOUND ( 'NONE', #113, .T. ) ;
-#94 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.750000000000000200, 0.0000000000000000000 ) ) ;
-#95 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #205, 'distance_accuracy_value', 'NONE');
-#96 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#97 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #14 ) ;
-#98 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#99 = CARTESIAN_POINT ( 'NONE',  ( 3.827021247335478800E-016, 0.0000000000000000000, 3.125000000000000000 ) ) ;
-#100 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ;
-#101 = MANIFOLD_SOLID_BREP ( 'Revolve1', #229 ) ;
-#102 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#103 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#104 = VERTEX_POINT ( 'NONE', #7 ) ;
-#105 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#106 = CIRCLE ( 'NONE', #53, 4.270833333333199800 ) ;
-#107 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 2.796799999999987300, 0.0000000000000000000 ) ) ;
-#108 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#109 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#110 = ORIENTED_EDGE ( 'NONE', *, *, #81, .F. ) ;
-#111 = VERTEX_POINT ( 'NONE', #173 ) ;
-#112 = EDGE_LOOP ( 'NONE', ( #119, #139, #124, #117 ) ) ;
-#113 = EDGE_LOOP ( 'NONE', ( #128, #121, #125, #136 ) ) ;
-#114 = EDGE_LOOP ( 'NONE', ( #100, #147, #140, #141 ) ) ;
-#115 = ORIENTED_EDGE ( 'NONE', *, *, #66, .F. ) ;
-#116 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
-#117 = ORIENTED_EDGE ( 'NONE', *, *, #78, .F. ) ;
-#118 = ORIENTED_EDGE ( 'NONE', *, *, #71, .T. ) ;
-#119 = ORIENTED_EDGE ( 'NONE', *, *, #74, .F. ) ;
-#120 = FILL_AREA_STYLE_COLOUR ( '', #92 ) ;
-#121 = ORIENTED_EDGE ( 'NONE', *, *, #81, .T. ) ;
-#122 = ORIENTED_EDGE ( 'NONE', *, *, #65, .T. ) ;
-#123 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#124 = ORIENTED_EDGE ( 'NONE', *, *, #76, .T. ) ;
-#125 = ORIENTED_EDGE ( 'NONE', *, *, #72, .T. ) ;
-#126 = ORIENTED_EDGE ( 'NONE', *, *, #82, .F. ) ;
-#127 = ORIENTED_EDGE ( 'NONE', *, *, #65, .F. ) ;
-#128 = ORIENTED_EDGE ( 'NONE', *, *, #69, .F. ) ;
-#129 = ORIENTED_EDGE ( 'NONE', *, *, #82, .T. ) ;
-#130 = EDGE_LOOP ( 'NONE', ( #118, #132, #116, #137 ) ) ;
-#131 = VERTEX_POINT ( 'NONE', #193 ) ;
-#132 = ORIENTED_EDGE ( 'NONE', *, *, #74, .T. ) ;
-#133 = VERTEX_POINT ( 'NONE', #232 ) ;
-#134 = ADVANCED_FACE ( 'NONE', ( #215 ), #174, .T. ) ;
-#135 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ;
-#136 = ORIENTED_EDGE ( 'NONE', *, *, #77, .F. ) ;
-#137 = ORIENTED_EDGE ( 'NONE', *, *, #76, .F. ) ;
-#138 = ORIENTED_EDGE ( 'NONE', *, *, #66, .T. ) ;
-#139 = ORIENTED_EDGE ( 'NONE', *, *, #77, .T. ) ;
-#140 = ORIENTED_EDGE ( 'NONE', *, *, #71, .F. ) ;
-#141 = ORIENTED_EDGE ( 'NONE', *, *, #72, .F. ) ;
-#142 = ORIENTED_EDGE ( 'NONE', *, *, #62, .F. ) ;
-#143 = VERTEX_POINT ( 'NONE', #144 ) ;
-#144 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 2.796799999999987300, -3.125000000000000000 ) ) ;
-#145 = ORIENTED_EDGE ( 'NONE', *, *, #62, .T. ) ;
-#146 = EDGE_LOOP ( 'NONE', ( #122, #138, #135, #142 ) ) ;
-#147 = ORIENTED_EDGE ( 'NONE', *, *, #69, .T. ) ;
-#148 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #197 ) ;
-#149 = EDGE_LOOP ( 'NONE', ( #216, #190 ) ) ;
-#150 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#151 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#152 = ADVANCED_FACE ( 'NONE', ( #213 ), #212, .T. ) ;
-#153 = ADVANCED_FACE ( 'NONE', ( #208 ), #206, .T. ) ;
-#154 = PLANE ( 'NONE',  #26 ) ;
-#155 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#156 = SURFACE_SIDE_STYLE ('',( #235 ) ) ;
-#157 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#158 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 2.796799999999987300, 0.0000000000000000000 ) ) ;
-#159 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#160 = ADVANCED_FACE ( 'NONE', ( #221 ), #202, .T. ) ;
-#161 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#162 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#163 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.749999999999969400, 0.09903333333320099600 ) ) ;
-#164 = ADVANCED_FACE ( 'NONE', ( #207 ), #196, .T. ) ;
-#165 = ADVANCED_FACE ( 'NONE', ( #203 ), #154, .T. ) ;
-#166 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#167 = ADVANCED_FACE ( 'NONE', ( #209 ), #201, .T. ) ;
-#168 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Sear_Rod', ( #101, #15 ), #27 ) ;
-#169 = FILL_AREA_STYLE ('',( #120 ) ) ;
-#170 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#171 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#172 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 7.296800000000000200, 0.0000000000000000000 ) ) ;
-#173 = CARTESIAN_POINT ( 'NONE',  ( 4.879360241842799800E-016, 0.0000000000000000000, 3.796800000000000200 ) ) ;
-#174 = PLANE ( 'NONE',  #33 ) ;
-#175 = SHAPE_DEFINITION_REPRESENTATION ( #97, #168 ) ;
-#176 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#177 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#178 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#179 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#180 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#181 = SURFACE_STYLE_USAGE ( .BOTH. , #185 ) ;
-#182 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#183 = PRESENTATION_STYLE_ASSIGNMENT (( #181 ) ) ;
-#184 = EDGE_LOOP ( 'NONE', ( #127, #126 ) ) ;
-#185 = SURFACE_SIDE_STYLE ('',( #195 ) ) ;
-#186 = VERTEX_POINT ( 'NONE', #231 ) ;
-#187 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#188 = FILL_AREA_STYLE ('',( #192 ) ) ;
-#189 = COLOUR_RGB ( '',1.000000000000000000, 1.000000000000000000, 1.000000000000000000 ) ;
-#190 = ORIENTED_EDGE ( 'NONE', *, *, #78, .T. ) ;
-#191 = PRODUCT ( 'Sear_Rod', 'Sear_Rod', '', ( #204 ) ) ;
-#192 = FILL_AREA_STYLE_COLOUR ( '', #189 ) ;
-#193 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 7.296800000000000200, -3.125000000000000000 ) ) ;
-#194 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#195 = SURFACE_STYLE_FILL_AREA ( #188 ) ;
-#196 = CONICAL_SURFACE ( 'NONE', #35, 4.171799999999999300, 0.7853981633974539400 ) ;
-#197 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#198 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.125000000000000000 ) ) ;
-#199 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#200 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#201 = TOROIDAL_SURFACE ( 'NONE', #25, -0.09903333333320099600, 4.270833333333199800 ) ;
-#202 = CYLINDRICAL_SURFACE ( 'NONE', #28, 3.125000000000000000 ) ;
-#203 = FACE_OUTER_BOUND ( 'NONE', #184, .T. ) ;
-#204 = PRODUCT_CONTEXT ( 'NONE', #197, 'mechanical' ) ;
-#205 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#206 = CYLINDRICAL_SURFACE ( 'NONE', #30, 3.125000000000000000 ) ;
-#207 = FACE_OUTER_BOUND ( 'NONE', #114, .T. ) ;
-#208 = FACE_OUTER_BOUND ( 'NONE', #211, .T. ) ;
-#209 = FACE_OUTER_BOUND ( 'NONE', #130, .T. ) ;
-#210 = VECTOR ( 'NONE', #70, 1000.000000000000000 ) ;
-#211 = EDGE_LOOP ( 'NONE', ( #115, #129, #145, #110 ) ) ;
-#212 = TOROIDAL_SURFACE ( 'NONE', #32, -0.09903333333320099600, 4.270833333333199800 ) ;
-#213 = FACE_OUTER_BOUND ( 'NONE', #112, .T. ) ;
-#214 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#215 = FACE_OUTER_BOUND ( 'NONE', #149, .T. ) ;
-#216 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
-#217 = CIRCLE ( 'NONE', #56, 3.125000000000000000 ) ;
-#218 = LINE ( 'NONE', #36, #87 ) ;
-#219 = VECTOR ( 'NONE', #34, 1000.000000000000000 ) ;
-#220 = CIRCLE ( 'NONE', #48, 4.171799999999999300 ) ;
-#221 = FACE_OUTER_BOUND ( 'NONE', #146, .T. ) ;
-#222 = PRESENTATION_STYLE_ASSIGNMENT (( #240 ) ) ;
-#223 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#224 = VECTOR ( 'NONE', #60, 1000.000000000000000 ) ;
-#225 = LINE ( 'NONE', #99, #210 ) ;
-#226 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #200, 'design' ) ;
-#227 = CIRCLE ( 'NONE', #46, 3.125000000000000000 ) ;
-#228 = CIRCLE ( 'NONE', #55, 4.171799999999999300 ) ;
-#229 = CLOSED_SHELL ( 'NONE', ( #160, #164, #167, #152, #9, #153, #165, #134 ) ) ;
-#230 = CIRCLE ( 'NONE', #59, 3.125000000000000000 ) ;
-#231 = CARTESIAN_POINT ( 'NONE',  ( 4.468001382009202300E-016, 2.796799999999987300, 3.125000000000000000 ) ) ;
-#232 = CARTESIAN_POINT ( 'NONE',  ( 5.108981516682927200E-016, 1.750000000000000200, 4.171799999999998400 ) ) ;
-#233 = CIRCLE ( 'NONE', #44, 3.125000000000000000 ) ;
-#234 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 1.750000000000000200, 0.0000000000000000000 ) ) ;
-#235 = SURFACE_STYLE_FILL_AREA ( #169 ) ;
-#236 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#237 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#238 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#239 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#240 = SURFACE_STYLE_USAGE ( .BOTH. , #156 ) ;
-#241 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -3.796799999999999700 ) ) ;
-#242 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
-ENDSEC;
-END-ISO-10303-21;

Firearms/The_Holdout_v3.0-RollaTroll/STEP/Steel_Block.step

@@ -1,265 +0,0 @@
-ISO-10303-21;
-HEADER;
-FILE_DESCRIPTION (( 'STEP AP214' ),
-    '1' );
-FILE_NAME ('Steel_Block.STEP',
-    '2015-01-13T04:32:40',
-    ( '' ),
-    ( '' ),
-    'SwSTEP 2.0',
-    'SolidWorks 2015',
-    '' );
-FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
-ENDSEC;
-
-DATA;
-#1 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #15, #246 ) ;
-#2 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#3 = ORIENTED_EDGE ( 'NONE', *, *, #82, .F. ) ;
-#4 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#5 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#6 = LINE ( 'NONE', #203, #62 ) ;
-#7 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#8 = SHAPE_REPRESENTATION ( 'Steel_Piece', ( #132 ), #104 ) ;
-#9 = LINE ( 'NONE', #5, #204 ) ;
-#10 = EDGE_CURVE ( 'NONE', #51, #38, #9, .T. ) ;
-#11 = SHAPE_REPRESENTATION ( 'Steel_Block', ( #208, #211, #227 ), #185 ) ;
-#12 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#13 = VECTOR ( 'NONE', #33, 1000.000000000000000 ) ;
-#14 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#15 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #170, .NOT_KNOWN. ) ;
-#16 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#17 = PRESENTATION_STYLE_ASSIGNMENT (( #226 ) ) ;
-#18 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #137 ) ;
-#19 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#20 = LINE ( 'NONE', #158, #129 ) ;
-#21 = LINE ( 'NONE', #2, #125 ) ;
-#22 = ORIENTED_EDGE ( 'NONE', *, *, #219, .F. ) ;
-#23 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION ( #80, #110 ) ;
-#24 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#25 = EDGE_CURVE ( 'NONE', #105, #144, #108, .T. ) ;
-#26 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #118, 'distance_accuracy_value', 'NONE');
-#27 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #170 ) ) ;
-#28 = FILL_AREA_STYLE ('',( #146 ) ) ;
-#29 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
-#30 = VECTOR ( 'NONE', #66, 1000.000000000000000 ) ;
-#31 = SHAPE_DEFINITION_REPRESENTATION ( #145, #11 ) ;
-#32 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #222 ) ;
-#33 = DIRECTION ( 'NONE',  ( -1.365923996832131600E-016, -0.0000000000000000000, -1.000000000000000000 ) ) ;
-#34 = FILL_AREA_STYLE_COLOUR ( '', #171 ) ;
-#35 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -3.174999999999999800, 0.0000000000000000000 ) ) ;
-#36 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#37 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#38 = VERTEX_POINT ( 'NONE', #24 ) ;
-#39 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #155 ) ;
-#40 = CLOSED_SHELL ( 'NONE', ( #191, #46, #140, #63, #209, #126 ) ) ;
-#41 = EDGE_CURVE ( 'NONE', #98, #230, #189, .T. ) ;
-#42 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#43 = EDGE_CURVE ( 'NONE', #144, #156, #130, .T. ) ;
-#44 = ORIENTED_EDGE ( 'NONE', *, *, #82, .T. ) ;
-#45 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #153, .NOT_KNOWN. ) ;
-#46 = ADVANCED_FACE ( 'NONE', ( #65 ), #237, .F. ) ;
-#47 = DIRECTION ( 'NONE',  ( 1.365923996832131600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#48 = ORIENTED_EDGE ( 'NONE', *, *, #41, .T. ) ;
-#49 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ;
-#50 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#51 = VERTEX_POINT ( 'NONE', #55 ) ;
-#52 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, -3.174999999999999800, 25.40000000000000200 ) ) ;
-#53 = ORIENTED_EDGE ( 'NONE', *, *, #245, .T. ) ;
-#54 = EDGE_CURVE ( 'NONE', #98, #105, #21, .T. ) ;
-#55 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#56 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #40 ) ;
-#57 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#58 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.174999999999999800, 0.0000000000000000000 ) ) ;
-#59 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #153 ) ) ;
-#60 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#61 = VECTOR ( 'NONE', #89, 1000.000000000000000 ) ;
-#62 = VECTOR ( 'NONE', #36, 1000.000000000000000 ) ;
-#63 = ADVANCED_FACE ( 'NONE', ( #70 ), #201, .F. ) ;
-#64 = AXIS2_PLACEMENT_3D ( 'NONE', #91, #216, #109 ) ;
-#65 = FACE_OUTER_BOUND ( 'NONE', #174, .T. ) ;
-#66 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#67 = STYLED_ITEM ( 'NONE', ( #17 ), #56 ) ;
-#68 = EDGE_CURVE ( 'NONE', #105, #87, #20, .T. ) ;
-#69 = FACE_OUTER_BOUND ( 'NONE', #193, .T. ) ;
-#70 = FACE_OUTER_BOUND ( 'NONE', #242, .T. ) ;
-#71 = ORIENTED_EDGE ( 'NONE', *, *, #206, .F. ) ;
-#72 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#73 = CONTEXT_DEPENDENT_SHAPE_REPRESENTATION ( #100, #176 ) ;
-#74 = FACE_OUTER_BOUND ( 'NONE', #96, .T. ) ;
-#75 = DIRECTION ( 'NONE',  ( 1.365923996832131600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#76 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #196, 'distance_accuracy_value', 'NONE');
-#77 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#78 = VECTOR ( 'NONE', #143, 1000.000000000000000 ) ;
-#79 = ORIENTED_EDGE ( 'NONE', *, *, #10, .T. ) ;
-#80 =( REPRESENTATION_RELATIONSHIP ('NONE','NONE', #11, #8 ) REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION ( #181 )SHAPE_REPRESENTATION_RELATIONSHIP( ) );
-#81 = VECTOR ( 'NONE', #47, 1000.000000000000000 ) ;
-#82 = EDGE_CURVE ( 'NONE', #87, #156, #180, .T. ) ;
-#83 = AXIS2_PLACEMENT_3D ( 'NONE', #135, #12, #151 ) ;
-#84 = PLANE ( 'NONE',  #183 ) ;
-#85 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, -3.174999999999999800, 25.40000000000000200 ) ) ;
-#86 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#87 = VERTEX_POINT ( 'NONE', #175 ) ;
-#88 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#89 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#90 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #220, #111 ) ;
-#91 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#92 = ORIENTED_EDGE ( 'NONE', *, *, #25, .T. ) ;
-#93 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #67 ) ) ;
-#94 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#95 = SURFACE_STYLE_USAGE ( .BOTH. , #161 ) ;
-#96 = EDGE_LOOP ( 'NONE', ( #149, #232, #71, #197 ) ) ;
-#97 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.174999999999999800, 0.0000000000000000000 ) ) ;
-#98 = VERTEX_POINT ( 'NONE', #128 ) ;
-#99 = SURFACE_SIDE_STYLE ('',( #177 ) ) ;
-#100 =( REPRESENTATION_RELATIONSHIP ('NONE','NONE', #11, #8 ) REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION ( #218 )SHAPE_REPRESENTATION_RELATIONSHIP( ) );
-#101 = EDGE_LOOP ( 'NONE', ( #148, #235, #164, #243 ) ) ;
-#102 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #239, 'distance_accuracy_value', 'NONE');
-#103 = ORIENTED_EDGE ( 'NONE', *, *, #231, .T. ) ;
-#104 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #76 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #196, #88, #215 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#105 = VERTEX_POINT ( 'NONE', #139 ) ;
-#106 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#107 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #67 ), #121 ) ;
-#108 = LINE ( 'NONE', #72, #61 ) ;
-#109 = DIRECTION ( 'NONE',  ( 1.365923996832131600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#110 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #247 ) ;
-#111 = DIRECTION ( 'NONE',  ( -1.365923996832131600E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#112 = VECTOR ( 'NONE', #165, 1000.000000000000000 ) ;
-#113 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#114 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#115 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #225 ) ;
-#116 = ORIENTED_EDGE ( 'NONE', *, *, #41, .F. ) ;
-#117 = AXIS2_PLACEMENT_3D ( 'NONE', #58, #187, #77 ) ;
-#118 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#119 = ORIENTED_EDGE ( 'NONE', *, *, #206, .T. ) ;
-#120 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#121 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #26 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #118, #244, #138 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#122 = LINE ( 'NONE', #236, #13 ) ;
-#123 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #221, 'distance_accuracy_value', 'NONE');
-#124 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#125 = VECTOR ( 'NONE', #75, 1000.000000000000000 ) ;
-#126 = ADVANCED_FACE ( 'NONE', ( #74 ), #84, .F. ) ;
-#127 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#128 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#129 = VECTOR ( 'NONE', #42, 1000.000000000000000 ) ;
-#130 = LINE ( 'NONE', #85, #78 ) ;
-#131 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#132 = AXIS2_PLACEMENT_3D ( 'NONE', #233, #131, #7 ) ;
-#133 = LINE ( 'NONE', #178, #81 ) ;
-#134 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#135 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#136 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#137 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#138 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#139 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#140 = ADVANCED_FACE ( 'NONE', ( #166 ), #198, .F. ) ;
-#141 = EDGE_LOOP ( 'NONE', ( #119, #147, #49, #44 ) ) ;
-#142 = STYLED_ITEM ( 'NONE', ( #192 ), #186 ) ;
-#143 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#144 = VERTEX_POINT ( 'NONE', #52 ) ;
-#145 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #1 ) ;
-#146 = FILL_AREA_STYLE_COLOUR ( '', #214 ) ;
-#147 = ORIENTED_EDGE ( 'NONE', *, *, #10, .F. ) ;
-#148 = ORIENTED_EDGE ( 'NONE', *, *, #54, .T. ) ;
-#149 = ORIENTED_EDGE ( 'NONE', *, *, #245, .F. ) ;
-#150 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#151 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#152 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#153 = PRODUCT ( 'Steel_Piece', 'Steel_Piece', '', ( #172 ) ) ;
-#154 = ORIENTED_EDGE ( 'NONE', *, *, #54, .F. ) ;
-#155 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#156 = VERTEX_POINT ( 'NONE', #234 ) ;
-#157 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #142 ) ) ;
-#158 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#159 = AXIS2_PLACEMENT_3D ( 'NONE', #173, #124, #120 ) ;
-#160 = ORIENTED_EDGE ( 'NONE', *, *, #43, .T. ) ;
-#161 = SURFACE_SIDE_STYLE ('',( #240 ) ) ;
-#162 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#163 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #142 ), #179 ) ;
-#164 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ;
-#165 = DIRECTION ( 'NONE',  ( -1.365923996832131600E-016, -0.0000000000000000000, -1.000000000000000000 ) ) ;
-#166 = FACE_OUTER_BOUND ( 'NONE', #141, .T. ) ;
-#167 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#168 = PLANE ( 'NONE',  #117 ) ;
-#169 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#170 = PRODUCT ( 'Steel_Block', 'Steel_Block', '', ( #241 ) ) ;
-#171 = COLOUR_RGB ( '',0.5294117647058823600, 0.5490196078431373000, 0.5490196078431373000 ) ;
-#172 = PRODUCT_CONTEXT ( 'NONE', #155, 'mechanical' ) ;
-#173 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#174 = EDGE_LOOP ( 'NONE', ( #160, #3, #194, #92 ) ) ;
-#175 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#176 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #248 ) ;
-#177 = SURFACE_STYLE_FILL_AREA ( #205 ) ;
-#178 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#179 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #123 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #221, #113, #238 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#180 = LINE ( 'NONE', #106, #217 ) ;
-#181 = ITEM_DEFINED_TRANSFORMATION ( 'NONE', 'NONE', #211,  #132 ) ;
-#182 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#183 = AXIS2_PLACEMENT_3D ( 'NONE', #184, #29, #162 ) ;
-#184 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -3.174999999999999800, 0.0000000000000000000 ) ) ;
-#185 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #102 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #239, #136, #16 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#186 = ADVANCED_BREP_SHAPE_REPRESENTATION ( '', ( #56, #132 ), #104 ) ;
-#187 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
-#188 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #60 ) ;
-#189 = LINE ( 'NONE', #182, #224 ) ;
-#190 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#191 = ADVANCED_FACE ( 'NONE', ( #69 ), #200, .F. ) ;
-#192 = PRESENTATION_STYLE_ASSIGNMENT (( #95 ) ) ;
-#193 = EDGE_LOOP ( 'NONE', ( #53, #210, #154, #48 ) ) ;
-#194 = ORIENTED_EDGE ( 'NONE', *, *, #68, .F. ) ;
-#195 = EDGE_CURVE ( 'NONE', #87, #51, #122, .T. ) ;
-#196 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#197 = ORIENTED_EDGE ( 'NONE', *, *, #43, .F. ) ;
-#198 = PLANE ( 'NONE',  #64 ) ;
-#199 = AXIS2_PLACEMENT_3D ( 'NONE', #4, #14, #152 ) ;
-#200 = PLANE ( 'NONE',  #90 ) ;
-#201 = PLANE ( 'NONE',  #159 ) ;
-#202 = LINE ( 'NONE', #19, #30 ) ;
-#203 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#204 = VECTOR ( 'NONE', #50, 1000.000000000000000 ) ;
-#205 = FILL_AREA_STYLE ('',( #34 ) ) ;
-#206 = EDGE_CURVE ( 'NONE', #156, #38, #213, .T. ) ;
-#207 = FACE_OUTER_BOUND ( 'NONE', #101, .T. ) ;
-#208 = AXIS2_PLACEMENT_3D ( 'NONE', #86, #37, #169 ) ;
-#209 = ADVANCED_FACE ( 'NONE', ( #207 ), #168, .T. ) ;
-#210 = ORIENTED_EDGE ( 'NONE', *, *, #25, .F. ) ;
-#211 = AXIS2_PLACEMENT_3D ( 'NONE', #35, #167, #57 ) ;
-#212 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #60, 'design' ) ;
-#213 = LINE ( 'NONE', #134, #112 ) ;
-#214 = COLOUR_RGB ( '',0.5294117647058823600, 0.5490196078431373000, 0.5490196078431373000 ) ;
-#215 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#216 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.365923996832131600E-016 ) ) ;
-#217 = VECTOR ( 'NONE', #127, 1000.000000000000000 ) ;
-#218 = ITEM_DEFINED_TRANSFORMATION ( 'NONE', 'NONE', #227,  #132 ) ;
-#219 = EDGE_CURVE ( 'NONE', #51, #98, #6, .T. ) ;
-#220 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.365923996832131600E-016 ) ) ;
-#221 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#222 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #45, #212 ) ;
-#223 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#224 = VECTOR ( 'NONE', #190, 1000.000000000000000 ) ;
-#225 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#226 = SURFACE_STYLE_USAGE ( .BOTH. , #99 ) ;
-#227 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #223, #114 ) ;
-#228 = SHAPE_REPRESENTATION_RELATIONSHIP ( 'NONE' , 'NONE' ,  #8, #186 ) ;
-#229 = SHAPE_DEFINITION_REPRESENTATION ( #32, #8 ) ;
-#230 = VERTEX_POINT ( 'NONE', #150 ) ;
-#231 = EDGE_CURVE ( 'NONE', #38, #230, #202, .T. ) ;
-#232 = ORIENTED_EDGE ( 'NONE', *, *, #231, .F. ) ;
-#233 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#234 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999900, -3.174999999999999800, 25.40000000000000200 ) ) ;
-#235 = ORIENTED_EDGE ( 'NONE', *, *, #68, .T. ) ;
-#236 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#237 = PLANE ( 'NONE',  #83 ) ;
-#238 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#239 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#240 = SURFACE_STYLE_FILL_AREA ( #28 ) ;
-#241 = PRODUCT_CONTEXT ( 'NONE', #225, 'mechanical' ) ;
-#242 = EDGE_LOOP ( 'NONE', ( #103, #116, #22, #79 ) ) ;
-#243 = ORIENTED_EDGE ( 'NONE', *, *, #219, .T. ) ;
-#244 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#245 = EDGE_CURVE ( 'NONE', #230, #144, #133, .T. ) ;
-#246 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #137, 'design' ) ;
-#247 = NEXT_ASSEMBLY_USAGE_OCCURRENCE ( 'NAUO1', ' ', ' ', #1, #222, $ ) ;
-#248 = NEXT_ASSEMBLY_USAGE_OCCURRENCE ( 'NAUO2', ' ', ' ', #1, #222, $ ) ;
-ENDSEC;
-END-ISO-10303-21;

Firearms/The_Holdout_v3.0-RollaTroll/STEP/Steel_Piece.step

@@ -1,219 +0,0 @@
-ISO-10303-21;
-HEADER;
-FILE_DESCRIPTION (( 'STEP AP214' ),
-    '1' );
-FILE_NAME ('Steel_Piece.step',
-    '2015-01-13T04:30:24',
-    ( '' ),
-    ( '' ),
-    'SwSTEP 2.0',
-    'SolidWorks 2015',
-    '' );
-FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
-ENDSEC;
-
-DATA;
-#1 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #73, 'design' ) ;
-#2 = ORIENTED_EDGE ( 'NONE', *, *, #93, .F. ) ;
-#3 = FACE_OUTER_BOUND ( 'NONE', #184, .T. ) ;
-#4 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#5 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#6 = EDGE_LOOP ( 'NONE', ( #36, #44, #14, #61 ) ) ;
-#7 = ORIENTED_EDGE ( 'NONE', *, *, #79, .T. ) ;
-#8 = ORIENTED_EDGE ( 'NONE', *, *, #82, .T. ) ;
-#9 = EDGE_LOOP ( 'NONE', ( #55, #185, #190, #7 ) ) ;
-#10 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#11 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#12 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#13 = PLANE ( 'NONE',  #110 ) ;
-#14 = ORIENTED_EDGE ( 'NONE', *, *, #103, .F. ) ;
-#15 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#16 = LINE ( 'NONE', #115, #70 ) ;
-#17 = ORIENTED_EDGE ( 'NONE', *, *, #83, .F. ) ;
-#18 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -1.365923996832131600E-016 ) ) ;
-#19 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#20 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#21 = VERTEX_POINT ( 'NONE', #5 ) ;
-#22 = EDGE_LOOP ( 'NONE', ( #2, #39, #66, #17 ) ) ;
-#23 = VERTEX_POINT ( 'NONE', #15 ) ;
-#24 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #73 ) ;
-#25 = DIRECTION ( 'NONE',  ( -1.000000000000000000, -0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#26 = VERTEX_POINT ( 'NONE', #40 ) ;
-#27 = DIRECTION ( 'NONE',  ( 1.365923996832131600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#28 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#29 = FACE_OUTER_BOUND ( 'NONE', #175, .T. ) ;
-#30 = PLANE ( 'NONE',  #127 ) ;
-#31 = PRODUCT ( 'Steel_Piece', 'Steel_Piece', '', ( #74 ) ) ;
-#32 = SHAPE_DEFINITION_REPRESENTATION ( #132, #172 ) ;
-#33 = CLOSED_SHELL ( 'NONE', ( #51, #183, #143, #167, #67, #166 ) ) ;
-#34 = FACE_OUTER_BOUND ( 'NONE', #22, .T. ) ;
-#35 = LINE ( 'NONE', #19, #75 ) ;
-#36 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ;
-#37 = LINE ( 'NONE', #49, #181 ) ;
-#38 = ORIENTED_EDGE ( 'NONE', *, *, #114, .T. ) ;
-#39 = ORIENTED_EDGE ( 'NONE', *, *, #114, .F. ) ;
-#40 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999900, -3.174999999999999800, 25.40000000000000200 ) ) ;
-#41 = ORIENTED_EDGE ( 'NONE', *, *, #103, .T. ) ;
-#42 = DIRECTION ( 'NONE',  ( 1.365923996832131600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#43 = VECTOR ( 'NONE', #124, 1000.000000000000000 ) ;
-#44 = ORIENTED_EDGE ( 'NONE', *, *, #94, .F. ) ;
-#45 = FACE_OUTER_BOUND ( 'NONE', #9, .T. ) ;
-#46 = ORIENTED_EDGE ( 'NONE', *, *, #94, .T. ) ;
-#47 = VERTEX_POINT ( 'NONE', #11 ) ;
-#48 = FILL_AREA_STYLE_COLOUR ( '', #161 ) ;
-#49 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#50 = FACE_OUTER_BOUND ( 'NONE', #6, .T. ) ;
-#51 = ADVANCED_FACE ( 'NONE', ( #50 ), #13, .F. ) ;
-#52 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #194 ) ;
-#53 = VECTOR ( 'NONE', #64, 1000.000000000000000 ) ;
-#54 = SURFACE_STYLE_FILL_AREA ( #160 ) ;
-#55 = ORIENTED_EDGE ( 'NONE', *, *, #77, .T. ) ;
-#56 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#57 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#58 = SURFACE_STYLE_FILL_AREA ( #87 ) ;
-#59 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#60 = COLOUR_RGB ( '',0.5294117647058823600, 0.5490196078431373000, 0.5490196078431373000 ) ;
-#61 = ORIENTED_EDGE ( 'NONE', *, *, #88, .T. ) ;
-#62 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#63 = FACE_OUTER_BOUND ( 'NONE', #189, .T. ) ;
-#64 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#65 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1', #33 ) ;
-#66 = ORIENTED_EDGE ( 'NONE', *, *, #77, .F. ) ;
-#67 = ADVANCED_FACE ( 'NONE', ( #63 ), #92, .T. ) ;
-#68 = ORIENTED_EDGE ( 'NONE', *, *, #85, .T. ) ;
-#69 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#70 = VECTOR ( 'NONE', #113, 1000.000000000000000 ) ;
-#71 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#72 = VECTOR ( 'NONE', #126, 1000.000000000000000 ) ;
-#73 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#74 = PRODUCT_CONTEXT ( 'NONE', #194, 'mechanical' ) ;
-#75 = VECTOR ( 'NONE', #25, 1000.000000000000000 ) ;
-#76 = LINE ( 'NONE', #111, #91 ) ;
-#77 = EDGE_CURVE ( 'NONE', #26, #168, #97, .T. ) ;
-#78 = DIRECTION ( 'NONE',  ( -1.365923996832131600E-016, -0.0000000000000000000, -1.000000000000000000 ) ) ;
-#79 = EDGE_CURVE ( 'NONE', #23, #26, #16, .T. ) ;
-#80 = DIRECTION ( 'NONE',  ( -1.365923996832131600E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ;
-#81 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, -3.174999999999999800, 25.40000000000000200 ) ) ;
-#82 = EDGE_CURVE ( 'NONE', #174, #23, #76, .T. ) ;
-#83 = EDGE_CURVE ( 'NONE', #198, #26, #95, .T. ) ;
-#84 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 3.174999999999999800, 0.0000000000000000000 ) ) ;
-#85 = EDGE_CURVE ( 'NONE', #21, #168, #180, .T. ) ;
-#86 = SURFACE_STYLE_USAGE ( .BOTH. , #105 ) ;
-#87 = FILL_AREA_STYLE ('',( #102 ) ) ;
-#88 = EDGE_CURVE ( 'NONE', #47, #196, #148, .T. ) ;
-#89 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#90 = EDGE_CURVE ( 'NONE', #23, #21, #173, .T. ) ;
-#91 = VECTOR ( 'NONE', #120, 1000.000000000000000 ) ;
-#92 = PLANE ( 'NONE',  #165 ) ;
-#93 = EDGE_CURVE ( 'NONE', #196, #198, #121, .T. ) ;
-#94 = EDGE_CURVE ( 'NONE', #174, #198, #145, .T. ) ;
-#95 = LINE ( 'NONE', #81, #128 ) ;
-#96 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
-#97 = LINE ( 'NONE', #107, #142 ) ;
-#98 = STYLED_ITEM ( 'NONE', ( #178 ), #65 ) ;
-#99 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#100 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#101 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #98 ), #171 ) ;
-#102 = FILL_AREA_STYLE_COLOUR ( '', #60 ) ;
-#103 = EDGE_CURVE ( 'NONE', #47, #174, #116, .T. ) ;
-#104 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #112, #1 ) ;
-#105 = SURFACE_SIDE_STYLE ('',( #58 ) ) ;
-#106 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#107 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, -3.174999999999999800, -25.39999999999999500 ) ) ;
-#108 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#109 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #98 ) ) ;
-#110 = AXIS2_PLACEMENT_3D ( 'NONE', #10, #18, #80 ) ;
-#111 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#112 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #31, .NOT_KNOWN. ) ;
-#113 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#114 = EDGE_CURVE ( 'NONE', #168, #196, #37, .T. ) ;
-#115 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-#116 = LINE ( 'NONE', #62, #176 ) ;
-#117 = EDGE_CURVE ( 'NONE', #21, #47, #35, .T. ) ;
-#118 = STYLED_ITEM ( 'NONE', ( #134 ), #172 ) ;
-#119 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#120 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#121 = LINE ( 'NONE', #57, #139 ) ;
-#122 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#123 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#124 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#125 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#126 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
-#127 = AXIS2_PLACEMENT_3D ( 'NONE', #12, #28, #144 ) ;
-#128 = VECTOR ( 'NONE', #122, 1000.000000000000000 ) ;
-#129 = CARTESIAN_POINT ( 'NONE',  ( 12.69999999999999200, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#130 = DIRECTION ( 'NONE',  ( -1.365923996832131600E-016, -0.0000000000000000000, -1.000000000000000000 ) ) ;
-#131 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #177 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #199, #138, #201 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#132 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #104 ) ;
-#133 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 1.365923996832131600E-016 ) ) ;
-#134 = PRESENTATION_STYLE_ASSIGNMENT (( #164 ) ) ;
-#135 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #147, #155 ) ;
-#136 = ORIENTED_EDGE ( 'NONE', *, *, #82, .F. ) ;
-#137 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #118 ), #188 ) ;
-#138 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#139 = VECTOR ( 'NONE', #27, 1000.000000000000000 ) ;
-#140 = VECTOR ( 'NONE', #78, 1000.000000000000000 ) ;
-#141 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #100, 'distance_accuracy_value', 'NONE');
-#142 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ;
-#143 = ADVANCED_FACE ( 'NONE', ( #45 ), #146, .F. ) ;
-#144 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#145 = LINE ( 'NONE', #56, #53 ) ;
-#146 = PLANE ( 'NONE',  #197 ) ;
-#147 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
-#148 = LINE ( 'NONE', #123, #72 ) ;
-#149 = CARTESIAN_POINT ( 'NONE',  ( -12.70000000000000600, 3.174999999999999800, -25.39999999999999500 ) ) ;
-#150 = PLANE ( 'NONE',  #135 ) ;
-#151 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #69, #195 ) ;
-#152 = PLANE ( 'NONE',  #151 ) ;
-#153 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, -3.174999999999999800, 0.0000000000000000000 ) ) ;
-#154 = DIRECTION ( 'NONE',  ( 1.365923996832131600E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ;
-#155 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
-#156 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, -3.174999999999999800, 25.40000000000000200 ) ) ;
-#157 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
-#158 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#159 = ORIENTED_EDGE ( 'NONE', *, *, #90, .T. ) ;
-#160 = FILL_AREA_STYLE ('',( #48 ) ) ;
-#161 = COLOUR_RGB ( '',0.5294117647058823600, 0.5490196078431373000, 0.5490196078431373000 ) ;
-#162 = SURFACE_SIDE_STYLE ('',( #54 ) ) ;
-#163 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #118 ) ) ;
-#164 = SURFACE_STYLE_USAGE ( .BOTH. , #162 ) ;
-#165 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #96, #108 ) ;
-#166 = ADVANCED_FACE ( 'NONE', ( #34 ), #150, .F. ) ;
-#167 = ADVANCED_FACE ( 'NONE', ( #29 ), #152, .F. ) ;
-#168 = VERTEX_POINT ( 'NONE', #89 ) ;
-#169 = ORIENTED_EDGE ( 'NONE', *, *, #88, .F. ) ;
-#170 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#171 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #141 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #100, #99, #106 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#172 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'Steel_Piece', ( #65, #179 ), #131 ) ;
-#173 = LINE ( 'NONE', #125, #140 ) ;
-#174 = VERTEX_POINT ( 'NONE', #202 ) ;
-#175 = EDGE_LOOP ( 'NONE', ( #38, #169, #186, #68 ) ) ;
-#176 = VECTOR ( 'NONE', #42, 1000.000000000000000 ) ;
-#177 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #199, 'distance_accuracy_value', 'NONE');
-#178 = PRESENTATION_STYLE_ASSIGNMENT (( #86 ) ) ;
-#179 = AXIS2_PLACEMENT_3D ( 'NONE', #157, #71, #20 ) ;
-#180 = LINE ( 'NONE', #119, #43 ) ;
-#181 = VECTOR ( 'NONE', #4, 1000.000000000000000 ) ;
-#182 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #31 ) ) ;
-#183 = ADVANCED_FACE ( 'NONE', ( #3 ), #30, .F. ) ;
-#184 = EDGE_LOOP ( 'NONE', ( #200, #191, #136, #46 ) ) ;
-#185 = ORIENTED_EDGE ( 'NONE', *, *, #85, .F. ) ;
-#186 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ;
-#187 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
-#188 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #192 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #170, #187, #158 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
-#189 = EDGE_LOOP ( 'NONE', ( #41, #8, #159, #193 ) ) ;
-#190 = ORIENTED_EDGE ( 'NONE', *, *, #90, .F. ) ;
-#191 = ORIENTED_EDGE ( 'NONE', *, *, #79, .F. ) ;
-#192 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #170, 'distance_accuracy_value', 'NONE');
-#193 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ;
-#194 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
-#195 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
-#196 = VERTEX_POINT ( 'NONE', #59 ) ;
-#197 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #133, #154 ) ;
-#198 = VERTEX_POINT ( 'NONE', #156 ) ;
-#199 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
-#200 = ORIENTED_EDGE ( 'NONE', *, *, #83, .T. ) ;
-#201 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
-#202 = CARTESIAN_POINT ( 'NONE',  ( -12.69999999999999900, 3.174999999999999800, 25.40000000000000200 ) ) ;
-ENDSEC;
-END-ISO-10303-21;