Adding the G18 Extendez 30 Round Magazine by Ivanthetroll.

Pistols/Glock-G18_30rd Extendez_Magazine_v1.0-Ivanthetroll/README.md

@@ -0,0 +1,54 @@
+## G18 Extendez 30 Round Magazine
+
+#### Author 
+IvanTheTroll (Magazine Body model errors cleaned up by FreeMenDontAsk)
+
+#### Version
+1.0 
+
+#### Description 
+This is the (Glock) G18 Extendez 30 Round Magazine by Ivanthetroll. This magazine is 3D-printable and includes the G18 body, follower, floorplate and locking tab. 
+
+This project represents over 500 hours of time in CAD, over 250 hours of 3D printer running time, over 1000 rounds of ammo, all over the course of six months - plus a few more hours and 100 more rounds to develop the Extendez :). The end result is worth it - a 3D printable Glock magazine that cost next to nothing to print, will last several hundred rounds, can be printed on essentially any FDM/FFF printer, and requires little to no post-processing.
+
+Below are instructions on printing and troubleshooting the Menendez Mag series.
+
+#### What you'll need:
+
+* PLA (Optionally Nylon [645 is tested good], PETG).  I recommend PLA, as it is cheap, easy to print, and is what I designed the mag in.
+* A printer capable of printing PLA (or the plastic you choose to use).  The Creality Ender 3 is capable of printing these mags, and costs only 200 bucks. A guide to dialing in your printer can be found here: https://jstark1809.keybase.pub/DetDisp_3D_Printing_Guide.pdf?dl=1
+* An appropriate Glock mag spring - use factory-spec Glock mag springs (not PMAG springs).  These can be had cheap from Amazon, The Official Glock Store (NOT Glockstore.com!!!), Wilson Combat, AliExpress (the springs usually come with a baseplate extension).
+		
+### Print Settings
+
+     - Orientations
+	     Note that the included STLs are scaled and oriented correctly!
+	 
+         - Print mag body upright, no supports.
+         - Print baseplate bottom down, no supports.
+         - Print locking tab bottom down, no supports.
+         - Print follower upside down, with the tallest flat portion to the print bed.  Use supports from print bed, but not full supports.
+	
+	 - Print Settings
+		 I recommend that you print in eSun PLA+, don't get too upset when you print it in ABS and it works poorly.
+		 
+		 - Nozzle Temp             - 230C
+		 - Bed Temp                - 60C
+		 - Brim                    - ON
+		 - Supports                - NONE
+		 - Layer Height            - 0.15mm
+		 - Shells (aka perimeters) - 4 inner/outer (this may not be necessary, but works well for me)
+		 - Bed prep                - Gluestick, optionally on top of Kapton Tape.
+	
+### Troubleshooting 
+		 Mags may feed poorly at first.  This is because the mag lips are reinforced beyond what PMAGs or Factory mags are.  
+		 Dry cycle (or live fire) a full mag through it if it has issues feeding.  This will solve rough feeding issues. 
+		 Printed mags will wear out.  Their rate of wear depends entirely on the user.  
+		 If you feed rounds into the mag in a manner that drags the round along the mag lips, you will cause excess wear on the mag lips, which will wear the mag out.
+		 Testing has netted a mag that is good for at least 500.  Make sure to load each mag carefully as to not scrape the rounds along the mag lips when loading.
+		 
+
+Want to join the movement? Head over to 
+* keybase.io/team/det_disp 
+* keybase.io/team/fosscad_org
+

Pistols/Glock-G18_30rd Extendez_Magazine_v1.0-Ivanthetroll/STEP/Menendez Mag Locking Tab V1.1.stp

@@ -0,0 +1,545 @@
+ISO-10303-21;
+HEADER;
+/* Generated by software containing ST-Developer
+ * from STEP Tools, Inc. (www.steptools.com) 
+ */
+
+FILE_DESCRIPTION(
+/* description */ (''),
+/* implementation_level */ '2;1');
+
+FILE_NAME(
+/* name */ 
+'C:\\Users\\johne\\Desktop\\Menendez Mag 17\\STEP\\Menendez Mag Lockin
+g Tab V1.1.stp',
+/* time_stamp */ '2019-06-27T23:09:43-05:00',
+/* author */ ('johne'),
+/* organization */ (''),
+/* preprocessor_version */ 'ST-DEVELOPER v16.13',
+/* originating_system */ 'Autodesk Inventor 2018',
+/* authorisation */ '');
+
+FILE_SCHEMA (('AUTOMOTIVE_DESIGN { 1 0 10303 214 3 1 1 }'));
+ENDSEC;
+
+DATA;
+#10=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#13),#455);
+#11=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#465,#12);
+#12=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#14),#454);
+#13=STYLED_ITEM('',(#474),#14);
+#14=MANIFOLD_SOLID_BREP('Solid1',#258);
+#15=TOROIDAL_SURFACE('',#296,0.105,0.02);
+#16=FACE_BOUND('',#46,.T.);
+#17=FACE_BOUND('',#54,.T.);
+#18=FACE_BOUND('',#56,.T.);
+#19=PLANE('',#281);
+#20=PLANE('',#282);
+#21=PLANE('',#289);
+#22=PLANE('',#292);
+#23=PLANE('',#295);
+#24=PLANE('',#300);
+#25=PLANE('',#301);
+#26=PLANE('',#302);
+#27=PLANE('',#303);
+#28=FACE_OUTER_BOUND('',#43,.T.);
+#29=FACE_OUTER_BOUND('',#44,.T.);
+#30=FACE_OUTER_BOUND('',#45,.T.);
+#31=FACE_OUTER_BOUND('',#47,.T.);
+#32=FACE_OUTER_BOUND('',#48,.T.);
+#33=FACE_OUTER_BOUND('',#49,.T.);
+#34=FACE_OUTER_BOUND('',#50,.T.);
+#35=FACE_OUTER_BOUND('',#51,.T.);
+#36=FACE_OUTER_BOUND('',#52,.T.);
+#37=FACE_OUTER_BOUND('',#53,.T.);
+#38=FACE_OUTER_BOUND('',#55,.T.);
+#39=FACE_OUTER_BOUND('',#57,.T.);
+#40=FACE_OUTER_BOUND('',#58,.T.);
+#41=FACE_OUTER_BOUND('',#59,.T.);
+#42=FACE_OUTER_BOUND('',#60,.T.);
+#43=EDGE_LOOP('',(#172,#173,#174,#175));
+#44=EDGE_LOOP('',(#176,#177,#178,#179));
+#45=EDGE_LOOP('',(#180,#181,#182,#183,#184,#185,#186,#187,#188,#189));
+#46=EDGE_LOOP('',(#190));
+#47=EDGE_LOOP('',(#191,#192,#193,#194));
+#48=EDGE_LOOP('',(#195,#196,#197,#198));
+#49=EDGE_LOOP('',(#199,#200,#201,#202));
+#50=EDGE_LOOP('',(#203,#204,#205,#206));
+#51=EDGE_LOOP('',(#207,#208,#209,#210));
+#52=EDGE_LOOP('',(#211,#212,#213,#214));
+#53=EDGE_LOOP('',(#215));
+#54=EDGE_LOOP('',(#216));
+#55=EDGE_LOOP('',(#217));
+#56=EDGE_LOOP('',(#218));
+#57=EDGE_LOOP('',(#219));
+#58=EDGE_LOOP('',(#220,#221,#222,#223));
+#59=EDGE_LOOP('',(#224,#225,#226,#227));
+#60=EDGE_LOOP('',(#228,#229,#230,#231,#232,#233,#234,#235,#236,#237));
+#61=LINE('',#386,#83);
+#62=LINE('',#389,#84);
+#63=LINE('',#392,#85);
+#64=LINE('',#394,#86);
+#65=LINE('',#395,#87);
+#66=LINE('',#398,#88);
+#67=LINE('',#400,#89);
+#68=LINE('',#402,#90);
+#69=LINE('',#406,#91);
+#70=LINE('',#410,#92);
+#71=LINE('',#416,#93);
+#72=LINE('',#420,#94);
+#73=LINE('',#421,#95);
+#74=LINE('',#424,#96);
+#75=LINE('',#428,#97);
+#76=LINE('',#429,#98);
+#77=LINE('',#432,#99);
+#78=LINE('',#436,#100);
+#79=LINE('',#437,#101);
+#80=LINE('',#447,#102);
+#81=LINE('',#448,#103);
+#82=LINE('',#450,#104);
+#83=VECTOR('',#310,0.393700787401575);
+#84=VECTOR('',#313,0.393700787401575);
+#85=VECTOR('',#316,0.393700787401575);
+#86=VECTOR('',#317,0.393700787401575);
+#87=VECTOR('',#318,0.393700787401575);
+#88=VECTOR('',#321,0.393700787401575);
+#89=VECTOR('',#322,0.393700787401575);
+#90=VECTOR('',#323,0.393700787401575);
+#91=VECTOR('',#326,0.393700787401575);
+#92=VECTOR('',#329,0.393700787401575);
+#93=VECTOR('',#336,0.393700787401575);
+#94=VECTOR('',#341,0.393700787401575);
+#95=VECTOR('',#342,0.393700787401575);
+#96=VECTOR('',#345,0.393700787401575);
+#97=VECTOR('',#350,0.393700787401575);
+#98=VECTOR('',#351,0.393700787401575);
+#99=VECTOR('',#354,0.393700787401575);
+#100=VECTOR('',#359,0.393700787401575);
+#101=VECTOR('',#360,0.393700787401575);
+#102=VECTOR('',#373,0.393700787401575);
+#103=VECTOR('',#374,0.393700787401575);
+#104=VECTOR('',#377,0.393700787401575);
+#105=CIRCLE('',#279,0.125);
+#106=CIRCLE('',#280,0.125);
+#107=CIRCLE('',#283,0.125);
+#108=CIRCLE('',#284,0.125);
+#109=CIRCLE('',#285,0.125);
+#110=CIRCLE('',#286,0.105);
+#111=CIRCLE('',#288,0.125);
+#112=CIRCLE('',#291,0.125);
+#113=CIRCLE('',#294,0.125);
+#114=CIRCLE('',#297,0.0849999999999999);
+#115=CIRCLE('',#299,0.0849999999999999);
+#116=VERTEX_POINT('',#382);
+#117=VERTEX_POINT('',#383);
+#118=VERTEX_POINT('',#385);
+#119=VERTEX_POINT('',#387);
+#120=VERTEX_POINT('',#391);
+#121=VERTEX_POINT('',#393);
+#122=VERTEX_POINT('',#397);
+#123=VERTEX_POINT('',#399);
+#124=VERTEX_POINT('',#401);
+#125=VERTEX_POINT('',#403);
+#126=VERTEX_POINT('',#405);
+#127=VERTEX_POINT('',#407);
+#128=VERTEX_POINT('',#409);
+#129=VERTEX_POINT('',#412);
+#130=VERTEX_POINT('',#415);
+#131=VERTEX_POINT('',#419);
+#132=VERTEX_POINT('',#423);
+#133=VERTEX_POINT('',#427);
+#134=VERTEX_POINT('',#431);
+#135=VERTEX_POINT('',#435);
+#136=VERTEX_POINT('',#439);
+#137=VERTEX_POINT('',#442);
+#138=VERTEX_POINT('',#446);
+#139=EDGE_CURVE('',#116,#117,#105,.T.);
+#140=EDGE_CURVE('',#117,#118,#61,.T.);
+#141=EDGE_CURVE('',#118,#119,#106,.T.);
+#142=EDGE_CURVE('',#119,#116,#62,.T.);
+#143=EDGE_CURVE('',#120,#117,#63,.T.);
+#144=EDGE_CURVE('',#121,#120,#64,.T.);
+#145=EDGE_CURVE('',#121,#118,#65,.T.);
+#146=EDGE_CURVE('',#116,#122,#66,.T.);
+#147=EDGE_CURVE('',#122,#123,#67,.T.);
+#148=EDGE_CURVE('',#123,#124,#68,.T.);
+#149=EDGE_CURVE('',#125,#124,#107,.T.);
+#150=EDGE_CURVE('',#125,#126,#69,.T.);
+#151=EDGE_CURVE('',#127,#126,#108,.T.);
+#152=EDGE_CURVE('',#127,#128,#70,.T.);
+#153=EDGE_CURVE('',#120,#128,#109,.T.);
+#154=EDGE_CURVE('',#129,#129,#110,.T.);
+#155=EDGE_CURVE('',#128,#130,#71,.T.);
+#156=EDGE_CURVE('',#130,#121,#111,.T.);
+#157=EDGE_CURVE('',#131,#127,#72,.T.);
+#158=EDGE_CURVE('',#131,#130,#73,.T.);
+#159=EDGE_CURVE('',#126,#132,#74,.T.);
+#160=EDGE_CURVE('',#132,#131,#112,.T.);
+#161=EDGE_CURVE('',#133,#125,#75,.T.);
+#162=EDGE_CURVE('',#133,#132,#76,.T.);
+#163=EDGE_CURVE('',#124,#134,#77,.T.);
+#164=EDGE_CURVE('',#134,#133,#113,.T.);
+#165=EDGE_CURVE('',#135,#123,#78,.T.);
+#166=EDGE_CURVE('',#135,#134,#79,.T.);
+#167=EDGE_CURVE('',#136,#136,#114,.T.);
+#168=EDGE_CURVE('',#137,#137,#115,.T.);
+#169=EDGE_CURVE('',#138,#135,#80,.T.);
+#170=EDGE_CURVE('',#138,#122,#81,.T.);
+#171=EDGE_CURVE('',#119,#138,#82,.T.);
+#172=ORIENTED_EDGE('',*,*,#139,.T.);
+#173=ORIENTED_EDGE('',*,*,#140,.T.);
+#174=ORIENTED_EDGE('',*,*,#141,.T.);
+#175=ORIENTED_EDGE('',*,*,#142,.T.);
+#176=ORIENTED_EDGE('',*,*,#140,.F.);
+#177=ORIENTED_EDGE('',*,*,#143,.F.);
+#178=ORIENTED_EDGE('',*,*,#144,.F.);
+#179=ORIENTED_EDGE('',*,*,#145,.T.);
+#180=ORIENTED_EDGE('',*,*,#139,.F.);
+#181=ORIENTED_EDGE('',*,*,#146,.T.);
+#182=ORIENTED_EDGE('',*,*,#147,.T.);
+#183=ORIENTED_EDGE('',*,*,#148,.T.);
+#184=ORIENTED_EDGE('',*,*,#149,.F.);
+#185=ORIENTED_EDGE('',*,*,#150,.T.);
+#186=ORIENTED_EDGE('',*,*,#151,.F.);
+#187=ORIENTED_EDGE('',*,*,#152,.T.);
+#188=ORIENTED_EDGE('',*,*,#153,.F.);
+#189=ORIENTED_EDGE('',*,*,#143,.T.);
+#190=ORIENTED_EDGE('',*,*,#154,.F.);
+#191=ORIENTED_EDGE('',*,*,#153,.T.);
+#192=ORIENTED_EDGE('',*,*,#155,.T.);
+#193=ORIENTED_EDGE('',*,*,#156,.T.);
+#194=ORIENTED_EDGE('',*,*,#144,.T.);
+#195=ORIENTED_EDGE('',*,*,#155,.F.);
+#196=ORIENTED_EDGE('',*,*,#152,.F.);
+#197=ORIENTED_EDGE('',*,*,#157,.F.);
+#198=ORIENTED_EDGE('',*,*,#158,.T.);
+#199=ORIENTED_EDGE('',*,*,#151,.T.);
+#200=ORIENTED_EDGE('',*,*,#159,.T.);
+#201=ORIENTED_EDGE('',*,*,#160,.T.);
+#202=ORIENTED_EDGE('',*,*,#157,.T.);
+#203=ORIENTED_EDGE('',*,*,#159,.F.);
+#204=ORIENTED_EDGE('',*,*,#150,.F.);
+#205=ORIENTED_EDGE('',*,*,#161,.F.);
+#206=ORIENTED_EDGE('',*,*,#162,.T.);
+#207=ORIENTED_EDGE('',*,*,#149,.T.);
+#208=ORIENTED_EDGE('',*,*,#163,.T.);
+#209=ORIENTED_EDGE('',*,*,#164,.T.);
+#210=ORIENTED_EDGE('',*,*,#161,.T.);
+#211=ORIENTED_EDGE('',*,*,#163,.F.);
+#212=ORIENTED_EDGE('',*,*,#148,.F.);
+#213=ORIENTED_EDGE('',*,*,#165,.F.);
+#214=ORIENTED_EDGE('',*,*,#166,.T.);
+#215=ORIENTED_EDGE('',*,*,#167,.T.);
+#216=ORIENTED_EDGE('',*,*,#154,.T.);
+#217=ORIENTED_EDGE('',*,*,#168,.F.);
+#218=ORIENTED_EDGE('',*,*,#167,.F.);
+#219=ORIENTED_EDGE('',*,*,#168,.T.);
+#220=ORIENTED_EDGE('',*,*,#169,.T.);
+#221=ORIENTED_EDGE('',*,*,#165,.T.);
+#222=ORIENTED_EDGE('',*,*,#147,.F.);
+#223=ORIENTED_EDGE('',*,*,#170,.F.);
+#224=ORIENTED_EDGE('',*,*,#142,.F.);
+#225=ORIENTED_EDGE('',*,*,#171,.T.);
+#226=ORIENTED_EDGE('',*,*,#170,.T.);
+#227=ORIENTED_EDGE('',*,*,#146,.F.);
+#228=ORIENTED_EDGE('',*,*,#141,.F.);
+#229=ORIENTED_EDGE('',*,*,#145,.F.);
+#230=ORIENTED_EDGE('',*,*,#156,.F.);
+#231=ORIENTED_EDGE('',*,*,#158,.F.);
+#232=ORIENTED_EDGE('',*,*,#160,.F.);
+#233=ORIENTED_EDGE('',*,*,#162,.F.);
+#234=ORIENTED_EDGE('',*,*,#164,.F.);
+#235=ORIENTED_EDGE('',*,*,#166,.F.);
+#236=ORIENTED_EDGE('',*,*,#169,.F.);
+#237=ORIENTED_EDGE('',*,*,#171,.F.);
+#238=CYLINDRICAL_SURFACE('',#278,0.125);
+#239=CYLINDRICAL_SURFACE('',#287,0.125);
+#240=CYLINDRICAL_SURFACE('',#290,0.125);
+#241=CYLINDRICAL_SURFACE('',#293,0.125);
+#242=CYLINDRICAL_SURFACE('',#298,0.0849999999999999);
+#243=ADVANCED_FACE('',(#28),#238,.T.);
+#244=ADVANCED_FACE('',(#29),#19,.T.);
+#245=ADVANCED_FACE('',(#30,#16),#20,.T.);
+#246=ADVANCED_FACE('',(#31),#239,.T.);
+#247=ADVANCED_FACE('',(#32),#21,.T.);
+#248=ADVANCED_FACE('',(#33),#240,.T.);
+#249=ADVANCED_FACE('',(#34),#22,.T.);
+#250=ADVANCED_FACE('',(#35),#241,.T.);
+#251=ADVANCED_FACE('',(#36),#23,.T.);
+#252=ADVANCED_FACE('',(#37,#17),#15,.F.);
+#253=ADVANCED_FACE('',(#38,#18),#242,.T.);
+#254=ADVANCED_FACE('',(#39),#24,.T.);
+#255=ADVANCED_FACE('',(#40),#25,.T.);
+#256=ADVANCED_FACE('',(#41),#26,.T.);
+#257=ADVANCED_FACE('',(#42),#27,.F.);
+#258=CLOSED_SHELL('',(#243,#244,#245,#246,#247,#248,#249,#250,#251,#252,
+#253,#254,#255,#256,#257));
+#259=DERIVED_UNIT_ELEMENT(#261,0.);
+#260=DERIVED_UNIT_ELEMENT(#459,0.);
+#261=(
+MASS_UNIT()
+NAMED_UNIT(*)
+SI_UNIT($,.GRAM.)
+);
+#262=DERIVED_UNIT((#259,#260));
+#263=MEASURE_REPRESENTATION_ITEM('density measure',
+POSITIVE_RATIO_MEASURE(1.),#262);
+#264=PROPERTY_DEFINITION_REPRESENTATION(#269,#266);
+#265=PROPERTY_DEFINITION_REPRESENTATION(#270,#267);
+#266=REPRESENTATION('material name',(#268),#454);
+#267=REPRESENTATION('density',(#263),#454);
+#268=DESCRIPTIVE_REPRESENTATION_ITEM('Generic','Generic');
+#269=PROPERTY_DEFINITION('material property','material name',#467);
+#270=PROPERTY_DEFINITION('material property','density of part',#467);
+#271=DATE_TIME_ROLE('creation_date');
+#272=APPLIED_DATE_AND_TIME_ASSIGNMENT(#273,#271,(#467));
+#273=DATE_AND_TIME(#274,#275);
+#274=CALENDAR_DATE(2019,9,6);
+#275=LOCAL_TIME(17,22,23.,#276);
+#276=COORDINATED_UNIVERSAL_TIME_OFFSET(0,0,.BEHIND.);
+#277=AXIS2_PLACEMENT_3D('placement',#380,#304,#305);
+#278=AXIS2_PLACEMENT_3D('',#381,#306,#307);
+#279=AXIS2_PLACEMENT_3D('',#384,#308,#309);
+#280=AXIS2_PLACEMENT_3D('',#388,#311,#312);
+#281=AXIS2_PLACEMENT_3D('',#390,#314,#315);
+#282=AXIS2_PLACEMENT_3D('',#396,#319,#320);
+#283=AXIS2_PLACEMENT_3D('',#404,#324,#325);
+#284=AXIS2_PLACEMENT_3D('',#408,#327,#328);
+#285=AXIS2_PLACEMENT_3D('',#411,#330,#331);
+#286=AXIS2_PLACEMENT_3D('',#413,#332,#333);
+#287=AXIS2_PLACEMENT_3D('',#414,#334,#335);
+#288=AXIS2_PLACEMENT_3D('',#417,#337,#338);
+#289=AXIS2_PLACEMENT_3D('',#418,#339,#340);
+#290=AXIS2_PLACEMENT_3D('',#422,#343,#344);
+#291=AXIS2_PLACEMENT_3D('',#425,#346,#347);
+#292=AXIS2_PLACEMENT_3D('',#426,#348,#349);
+#293=AXIS2_PLACEMENT_3D('',#430,#352,#353);
+#294=AXIS2_PLACEMENT_3D('',#433,#355,#356);
+#295=AXIS2_PLACEMENT_3D('',#434,#357,#358);
+#296=AXIS2_PLACEMENT_3D('',#438,#361,#362);
+#297=AXIS2_PLACEMENT_3D('',#440,#363,#364);
+#298=AXIS2_PLACEMENT_3D('',#441,#365,#366);
+#299=AXIS2_PLACEMENT_3D('',#443,#367,#368);
+#300=AXIS2_PLACEMENT_3D('',#444,#369,#370);
+#301=AXIS2_PLACEMENT_3D('',#445,#371,#372);
+#302=AXIS2_PLACEMENT_3D('',#449,#375,#376);
+#303=AXIS2_PLACEMENT_3D('',#451,#378,#379);
+#304=DIRECTION('axis',(0.,0.,1.));
+#305=DIRECTION('refdir',(1.,0.,0.));
+#306=DIRECTION('center_axis',(0.,1.,0.));
+#307=DIRECTION('ref_axis',(0.116255142077558,0.,-0.993219382583992));
+#308=DIRECTION('center_axis',(0.,-1.,0.));
+#309=DIRECTION('ref_axis',(0.116255142077558,0.,-0.993219382583992));
+#310=DIRECTION('',(0.,-1.,0.));
+#311=DIRECTION('center_axis',(0.,1.,0.));
+#312=DIRECTION('ref_axis',(0.116255142077558,0.,-0.993219382583992));
+#313=DIRECTION('',(0.,1.,0.));
+#314=DIRECTION('center_axis',(0.230933720872973,0.,-0.972969483881054));
+#315=DIRECTION('ref_axis',(-0.972969483881054,0.,-0.230933720872973));
+#316=DIRECTION('',(-0.972969483881054,0.,-0.230933720872973));
+#317=DIRECTION('',(0.,1.,0.));
+#318=DIRECTION('',(-0.972969483881054,0.,-0.230933720872973));
+#319=DIRECTION('center_axis',(0.,1.,0.));
+#320=DIRECTION('ref_axis',(0.,0.,1.));
+#321=DIRECTION('',(-1.,0.,0.));
+#322=DIRECTION('',(0.,0.,1.));
+#323=DIRECTION('',(1.,0.,0.));
+#324=DIRECTION('center_axis',(0.,-1.,0.));
+#325=DIRECTION('ref_axis',(0.116255142077559,0.,0.993219382583992));
+#326=DIRECTION('',(0.972969483881053,0.,-0.230933720872974));
+#327=DIRECTION('center_axis',(0.,-1.,0.));
+#328=DIRECTION('ref_axis',(0.784516959941904,0.,0.62010736132021));
+#329=DIRECTION('',(0.,0.,-1.));
+#330=DIRECTION('center_axis',(0.,-1.,0.));
+#331=DIRECTION('ref_axis',(0.784516959941903,0.,-0.62010736132021));
+#332=DIRECTION('center_axis',(0.,1.,0.));
+#333=DIRECTION('ref_axis',(-1.,0.,0.));
+#334=DIRECTION('center_axis',(0.,1.,0.));
+#335=DIRECTION('ref_axis',(0.784516959941903,0.,-0.62010736132021));
+#336=DIRECTION('',(0.,-1.,0.));
+#337=DIRECTION('center_axis',(0.,1.,0.));
+#338=DIRECTION('ref_axis',(0.784516959941903,0.,-0.62010736132021));
+#339=DIRECTION('center_axis',(1.,0.,0.));
+#340=DIRECTION('ref_axis',(0.,0.,-1.));
+#341=DIRECTION('',(0.,1.,0.));
+#342=DIRECTION('',(0.,0.,-1.));
+#343=DIRECTION('center_axis',(0.,1.,0.));
+#344=DIRECTION('ref_axis',(0.784516959941904,0.,0.62010736132021));
+#345=DIRECTION('',(0.,-1.,0.));
+#346=DIRECTION('center_axis',(0.,1.,0.));
+#347=DIRECTION('ref_axis',(0.784516959941904,0.,0.62010736132021));
+#348=DIRECTION('center_axis',(0.230933720872974,0.,0.972969483881053));
+#349=DIRECTION('ref_axis',(0.972969483881053,0.,-0.230933720872974));
+#350=DIRECTION('',(0.,1.,0.));
+#351=DIRECTION('',(0.972969483881053,0.,-0.230933720872974));
+#352=DIRECTION('center_axis',(0.,1.,0.));
+#353=DIRECTION('ref_axis',(0.116255142077559,0.,0.993219382583992));
+#354=DIRECTION('',(0.,-1.,0.));
+#355=DIRECTION('center_axis',(0.,1.,0.));
+#356=DIRECTION('ref_axis',(0.116255142077559,0.,0.993219382583992));
+#357=DIRECTION('center_axis',(0.,0.,1.));
+#358=DIRECTION('ref_axis',(1.,0.,0.));
+#359=DIRECTION('',(0.,1.,0.));
+#360=DIRECTION('',(1.,0.,0.));
+#361=DIRECTION('center_axis',(0.,-1.,0.));
+#362=DIRECTION('ref_axis',(0.,0.,-1.));
+#363=DIRECTION('center_axis',(0.,-1.,0.));
+#364=DIRECTION('ref_axis',(-1.,0.,0.));
+#365=DIRECTION('center_axis',(0.,1.,0.));
+#366=DIRECTION('ref_axis',(-1.,0.,0.));
+#367=DIRECTION('center_axis',(0.,1.,0.));
+#368=DIRECTION('ref_axis',(-1.,0.,0.));
+#369=DIRECTION('center_axis',(0.,1.,0.));
+#370=DIRECTION('ref_axis',(0.,0.,1.));
+#371=DIRECTION('center_axis',(-1.,0.,0.));
+#372=DIRECTION('ref_axis',(0.,0.,1.));
+#373=DIRECTION('',(0.,0.,1.));
+#374=DIRECTION('',(0.,1.,0.));
+#375=DIRECTION('center_axis',(0.,0.,-1.));
+#376=DIRECTION('ref_axis',(-1.,0.,0.));
+#377=DIRECTION('',(-1.,0.,0.));
+#378=DIRECTION('center_axis',(0.,1.,0.));
+#379=DIRECTION('ref_axis',(0.,0.,1.));
+#380=CARTESIAN_POINT('',(0.,0.,0.));
+#381=CARTESIAN_POINT('Origin',(0.763368899344384,0.,-0.602));
+#382=CARTESIAN_POINT('',(0.763368899344384,0.065,-0.727));
+#383=CARTESIAN_POINT('',(0.792235614453506,0.065,-0.723621185485132));
+#384=CARTESIAN_POINT('Origin',(0.763368899344384,0.065,-0.602));
+#385=CARTESIAN_POINT('',(0.792235614453506,0.,-0.723621185485132));
+#386=CARTESIAN_POINT('',(0.792235614453506,0.,-0.723621185485132));
+#387=CARTESIAN_POINT('',(0.763368899344384,0.,-0.727));
+#388=CARTESIAN_POINT('Origin',(0.763368899344384,0.,-0.602));
+#389=CARTESIAN_POINT('',(0.763368899344384,0.,-0.727));
+#390=CARTESIAN_POINT('Origin',(1.193,0.,-0.6285));
+#391=CARTESIAN_POINT('',(1.09686671510912,0.065,-0.651317177257232));
+#392=CARTESIAN_POINT('',(1.193,0.065,-0.6285));
+#393=CARTESIAN_POINT('',(1.09686671510912,0.,-0.651317177257232));
+#394=CARTESIAN_POINT('',(1.09686671510912,0.,-0.651317177257232));
+#395=CARTESIAN_POINT('',(1.193,0.,-0.6285));
+#396=CARTESIAN_POINT('Origin',(0.566893081421443,0.065,-0.3635));
+#397=CARTESIAN_POINT('',(0.,0.065,-0.727));
+#398=CARTESIAN_POINT('',(0.778,0.065,-0.727));
+#399=CARTESIAN_POINT('',(0.,0.065,0.));
+#400=CARTESIAN_POINT('',(0.,0.065,-0.727));
+#401=CARTESIAN_POINT('',(0.763368899344387,0.065,0.));
+#402=CARTESIAN_POINT('',(0.,0.065,0.));
+#403=CARTESIAN_POINT('',(0.792235614453508,0.065,-0.00337881451486832));
+#404=CARTESIAN_POINT('Origin',(0.763368899344387,0.065,-0.125));
+#405=CARTESIAN_POINT('',(1.09686671510912,0.065,-0.0756828227427673));
+#406=CARTESIAN_POINT('',(0.778000000000002,0.065,0.));
+#407=CARTESIAN_POINT('',(1.193,0.065,-0.197304008227899));
+#408=CARTESIAN_POINT('Origin',(1.068,0.065,-0.197304008227899));
+#409=CARTESIAN_POINT('',(1.193,0.065,-0.529695991772101));
+#410=CARTESIAN_POINT('',(1.193,0.065,-0.0985));
+#411=CARTESIAN_POINT('Origin',(1.068,0.065,-0.529695991772101));
+#412=CARTESIAN_POINT('',(1.073,0.065,-0.36));
+#413=CARTESIAN_POINT('Origin',(0.968,0.065,-0.36));
+#414=CARTESIAN_POINT('Origin',(1.068,0.,-0.529695991772101));
+#415=CARTESIAN_POINT('',(1.193,0.,-0.529695991772101));
+#416=CARTESIAN_POINT('',(1.193,0.,-0.529695991772101));
+#417=CARTESIAN_POINT('Origin',(1.068,0.,-0.529695991772101));
+#418=CARTESIAN_POINT('Origin',(1.193,0.,-0.0985));
+#419=CARTESIAN_POINT('',(1.193,0.,-0.197304008227899));
+#420=CARTESIAN_POINT('',(1.193,0.,-0.197304008227899));
+#421=CARTESIAN_POINT('',(1.193,0.,-0.0985));
+#422=CARTESIAN_POINT('Origin',(1.068,0.,-0.197304008227899));
+#423=CARTESIAN_POINT('',(1.09686671510912,0.,-0.0756828227427673));
+#424=CARTESIAN_POINT('',(1.09686671510912,0.,-0.0756828227427673));
+#425=CARTESIAN_POINT('Origin',(1.068,0.,-0.197304008227899));
+#426=CARTESIAN_POINT('Origin',(0.778000000000002,0.,0.));
+#427=CARTESIAN_POINT('',(0.792235614453508,0.,-0.00337881451486832));
+#428=CARTESIAN_POINT('',(0.792235614453508,0.,-0.00337881451486827));
+#429=CARTESIAN_POINT('',(0.778000000000002,0.,0.));
+#430=CARTESIAN_POINT('Origin',(0.763368899344387,0.,-0.125));
+#431=CARTESIAN_POINT('',(0.763368899344387,0.,0.));
+#432=CARTESIAN_POINT('',(0.763368899344387,0.,0.));
+#433=CARTESIAN_POINT('Origin',(0.763368899344387,0.,-0.125));
+#434=CARTESIAN_POINT('Origin',(0.,0.,0.));
+#435=CARTESIAN_POINT('',(0.,0.,0.));
+#436=CARTESIAN_POINT('',(0.,0.,0.));
+#437=CARTESIAN_POINT('',(0.,0.,0.));
+#438=CARTESIAN_POINT('Origin',(0.968,0.085,-0.36));
+#439=CARTESIAN_POINT('',(1.053,0.085,-0.36));
+#440=CARTESIAN_POINT('Origin',(0.968,0.085,-0.36));
+#441=CARTESIAN_POINT('Origin',(0.968,0.065,-0.36));
+#442=CARTESIAN_POINT('',(1.053,0.155,-0.36));
+#443=CARTESIAN_POINT('Origin',(0.968,0.155,-0.36));
+#444=CARTESIAN_POINT('Origin',(0.968,0.155,-0.36));
+#445=CARTESIAN_POINT('Origin',(0.,0.,-0.727));
+#446=CARTESIAN_POINT('',(0.,0.,-0.727));
+#447=CARTESIAN_POINT('',(0.,0.,-0.727));
+#448=CARTESIAN_POINT('',(0.,0.,-0.727));
+#449=CARTESIAN_POINT('Origin',(0.778,0.,-0.727));
+#450=CARTESIAN_POINT('',(0.778,0.,-0.727));
+#451=CARTESIAN_POINT('Origin',(0.566893081421443,0.,-0.3635));
+#452=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000393700787401575),
+#457,'DISTANCE_ACCURACY_VALUE',
+'Maximum model space distance between geometric entities at asserted c
+onnectivities');
+#453=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000393700787401575),
+#457,'DISTANCE_ACCURACY_VALUE',
+'Maximum model space distance between geometric entities at asserted c
+onnectivities');
+#454=(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#452))
+GLOBAL_UNIT_ASSIGNED_CONTEXT((#457,#462,#461))
+REPRESENTATION_CONTEXT('','3D')
+);
+#455=(
+GEOMETRIC_REPRESENTATION_CONTEXT(3)
+GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#453))
+GLOBAL_UNIT_ASSIGNED_CONTEXT((#457,#462,#461))
+REPRESENTATION_CONTEXT('','3D')
+);
+#456=DIMENSIONAL_EXPONENTS(1.,0.,0.,0.,0.,0.,0.);
+#457=(
+CONVERSION_BASED_UNIT('inch',#460)
+LENGTH_UNIT()
+NAMED_UNIT(#456)
+);
+#458=(
+LENGTH_UNIT()
+NAMED_UNIT(*)
+SI_UNIT(.MILLI.,.METRE.)
+);
+#459=(
+LENGTH_UNIT()
+NAMED_UNIT(*)
+SI_UNIT(.CENTI.,.METRE.)
+);
+#460=LENGTH_MEASURE_WITH_UNIT(LENGTH_MEASURE(25.4),#458);
+#461=(
+NAMED_UNIT(*)
+SI_UNIT($,.STERADIAN.)
+SOLID_ANGLE_UNIT()
+);
+#462=(
+NAMED_UNIT(*)
+PLANE_ANGLE_UNIT()
+SI_UNIT($,.RADIAN.)
+);
+#463=SHAPE_DEFINITION_REPRESENTATION(#464,#465);
+#464=PRODUCT_DEFINITION_SHAPE('',$,#467);
+#465=SHAPE_REPRESENTATION('',(#277),#454);
+#466=PRODUCT_DEFINITION_CONTEXT('part definition',#471,'design');
+#467=PRODUCT_DEFINITION('Menendez Mag Follower V1.11',
+'Menendez Mag Locking Tab V1.1',#468,#466);
+#468=PRODUCT_DEFINITION_FORMATION('',$,#473);
+#469=PRODUCT_RELATED_PRODUCT_CATEGORY('Menendez Mag Locking Tab V1.1',
+'Menendez Mag Locking Tab V1.1',(#473));
+#470=APPLICATION_PROTOCOL_DEFINITION('international standard',
+'automotive_design',2009,#471);
+#471=APPLICATION_CONTEXT(
+'Core Data for Automotive Mechanical Design Process');
+#472=PRODUCT_CONTEXT('part definition',#471,'mechanical');
+#473=PRODUCT('Menendez Mag Follower V1.11',
+'Menendez Mag Locking Tab V1.1',$,(#472));
+#474=PRESENTATION_STYLE_ASSIGNMENT((#475));
+#475=SURFACE_STYLE_USAGE(.BOTH.,#476);
+#476=SURFACE_SIDE_STYLE('',(#477));
+#477=SURFACE_STYLE_FILL_AREA(#478);
+#478=FILL_AREA_STYLE('',(#479));
+#479=FILL_AREA_STYLE_COLOUR('',#480);
+#480=COLOUR_RGB('',0.749019607843137,0.749019607843137,0.749019607843137);
+ENDSEC;
+END-ISO-10303-21;