diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/README.md b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/README.md new file mode 100644 index 0000000..3d2d0f5 --- /dev/null +++ b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/README.md @@ -0,0 +1,19 @@ +# Aleppo Rifle Grenade + +#### Author +Anonymous + +#### Version +0.1 + +#### Description +Three part printable modular rifle grenade. Designed to fit any standard 22mm grenade launching spigot. As far as I can tell, both NATO and Warsaw pact spigots are 22mm so this should work with both. + +The spigot recess diameter may need to be tweaked for individual printers to ensure a tight but sliding fit on the spigot. Payload space in base is considered "user space" and is to be filled by the end user (you can put some treats in there and launch them across a body of water to your friend stuck on a deserted island, for example--but then you probably want to leave out the impact fuse). Also included is an impact fuse that incorporates a nipple from a Peretti 1848 cap and ball pistol. Any suitable nipple may be substituted. Depending on the hardness of the impact zone, the striker may need to have mass added to it. It can also be easily made entirely out of metal to moot this point. + +The striker of the impact fuse is intended to be fitted with a thin, paper rupture disk at the base, filled with black powder, and then topped with the screw-in nipple. The nipple should self thread in the plastic. The nipple would then be capped with the appropriate sized cap, dropped into the nose tube, and the cover (which incorporates the hammer) snapped into place. THIS SHOULD NOT BE DONE UNTIL IMMEDIATELY BEFORE FIRING AS THIS ARMS THE DEVICE. Version 0.2 will include a cross pin safety that locks the impact fuse into place until removed. + +#### Disclaimer +THIS IS COMPLETELY UNTESTED AND MAY VERY WELL BLOW UP IN YOUR FACE IF YOU DON'T KNOW WHAT YOU ARE DOING. Use this set of models as a guide only. Don't do anything stupid. + +Also be aware of the laws in your jurisdiction with respect to explosives and packing them into things that fly. Again, don't be stupid. diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/Renders/RGv0.1.jpg b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/Renders/RGv0.1.jpg new file mode 100644 index 0000000..1271a07 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/Renders/RGv0.1.jpg differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/Renders/RGv0.1.slddrw b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/Renders/RGv0.1.slddrw new file mode 100644 index 0000000..1d07a1a Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/Renders/RGv0.1.slddrw differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/Renders/RGv0.1drawing.jpg b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/Renders/RGv0.1drawing.jpg new file mode 100644 index 0000000..ac62118 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/Renders/RGv0.1drawing.jpg differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/RGv0.1.sldasm b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/RGv0.1.sldasm new file mode 100644 index 0000000..95cdc7a Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/RGv0.1.sldasm differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/base.sldprt b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/base.sldprt new file mode 100644 index 0000000..3507ef9 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/base.sldprt differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/fuse.sldprt b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/fuse.sldprt new file mode 100644 index 0000000..d7a4440 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/fuse.sldprt differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/hammer.sldprt b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/hammer.sldprt new file mode 100644 index 0000000..43abc70 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/hammer.sldprt differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/impactFuse.sldprt b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/impactFuse.sldprt new file mode 100644 index 0000000..ec8bbd1 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/impactFuse.sldprt differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/nipple.sldprt b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/nipple.sldprt new file mode 100644 index 0000000..5ea83d1 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/nipple.sldprt differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/nose.sldprt b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/nose.sldprt new file mode 100644 index 0000000..ddb50e0 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/nose.sldprt differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/ruptureDisk.sldprt b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/ruptureDisk.sldprt new file mode 100644 index 0000000..6f97ff4 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/SLDPRT/ruptureDisk.sldprt differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/base.step b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/base.step new file mode 100644 index 0000000..74ac01e --- /dev/null +++ b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/base.step @@ -0,0 +1,1222 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('base.step', + '2014-03-25T03:37:44', + ( 'eric' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2012', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = AXIS2_PLACEMENT_3D ( 'NONE', #550, #551, #552 ) ; +#2 = FACE_OUTER_BOUND ( 'NONE', #290, .T. ) ; +#3 = CYLINDRICAL_SURFACE ( 'NONE', #6, 32.94748262907080500 ) ; +#4 = AXIS2_PLACEMENT_3D ( 'NONE', #534, #535, #536 ) ; +#5 = AXIS2_PLACEMENT_3D ( 'NONE', #554, #555, #556 ) ; +#6 = AXIS2_PLACEMENT_3D ( 'NONE', #527, #528, #529 ) ; +#7 = AXIS2_PLACEMENT_3D ( 'NONE', #570, #571, #572 ) ; +#8 = CLOSED_SHELL ( 'NONE', ( #138, #131, #134, #75, #76, #73, #80, #99, #82, #69, #81, #66, #68, #70, #77, #186, #185, #137, #130, #120, #126, #94 ) ) ; +#9 = FACE_OUTER_BOUND ( 'NONE', #292, .T. ) ; +#10 = AXIS2_PLACEMENT_3D ( 'NONE', #576, #577, #578 ) ; +#11 = FACE_OUTER_BOUND ( 'NONE', #321, .T. ) ; +#12 = CYLINDRICAL_SURFACE ( 'NONE', #10, 19.00000000000000000 ) ; +#13 = FACE_OUTER_BOUND ( 'NONE', #282, .T. ) ; +#14 = AXIS2_PLACEMENT_3D ( 'NONE', #546, #547, #548 ) ; +#15 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #56 ), #780 ) ; +#16 = FACE_OUTER_BOUND ( 'NONE', #284, .T. ) ; +#17 = FACE_OUTER_BOUND ( 'NONE', #286, .T. ) ; +#18 = AXIS2_PLACEMENT_3D ( 'NONE', #573, #574, #575 ) ; +#19 = FACE_OUTER_BOUND ( 'NONE', #285, .T. ) ; +#20 = STYLED_ITEM ( 'NONE', ( #510 ), #66 ) ; +#21 = CYLINDRICAL_SURFACE ( 'NONE', #30, 34.94748262907079800 ) ; +#22 = FACE_OUTER_BOUND ( 'NONE', #289, .T. ) ; +#23 = VECTOR ( 'NONE', #519, 1000.000000000000000 ) ; +#24 = FACE_BOUND ( 'NONE', #288, .T. ) ; +#25 = AXIS2_PLACEMENT_3D ( 'NONE', #499, #503, #504 ) ; +#26 = AXIS2_PLACEMENT_3D ( 'NONE', #524, #525, #526 ) ; +#27 = VECTOR ( 'NONE', #502, 1000.000000000000000 ) ; +#28 = AXIS2_PLACEMENT_3D ( 'NONE', #537, #538, #539 ) ; +#29 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #20 ), #778 ) ; +#30 = AXIS2_PLACEMENT_3D ( 'NONE', #514, #515, #516 ) ; +#31 = FACE_OUTER_BOUND ( 'NONE', #312, .T. ) ; +#32 = VECTOR ( 'NONE', #498, 1000.000000000000100 ) ; +#33 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #20 ) ) ; +#34 = CYLINDRICAL_SURFACE ( 'NONE', #25, 19.00000000000000000 ) ; +#35 = FACE_OUTER_BOUND ( 'NONE', #313, .T. ) ; +#36 = FACE_OUTER_BOUND ( 'NONE', #287, .T. ) ; +#37 = CLOSED_SHELL ( 'NONE', ( #109, #97, #101, #100, #105 ) ) ; +#38 = CLOSED_SHELL ( 'NONE', ( #87, #95, #96, #104, #83 ) ) ; +#39 = CLOSED_SHELL ( 'NONE', ( #107, #102, #106, #79, #90, #89 ) ) ; +#40 = AXIS2_PLACEMENT_3D ( 'NONE', #558, #559, #560 ) ; +#41 = CLOSED_SHELL ( 'NONE', ( #72, #65, #78, #103, #88 ) ) ; +#42 = FACE_OUTER_BOUND ( 'NONE', #309, .T. ) ; +#43 = CYLINDRICAL_SURFACE ( 'NONE', #28, 32.94748262907080500 ) ; +#44 = FACE_OUTER_BOUND ( 'NONE', #278, .T. ) ; +#45 = CYLINDRICAL_SURFACE ( 'NONE', #26, 19.00000000000000000 ) ; +#46 = FACE_BOUND ( 'NONE', #291, .T. ) ; +#47 = AXIS2_PLACEMENT_3D ( 'NONE', #521, #522, #523 ) ; +#48 = FACE_OUTER_BOUND ( 'NONE', #314, .T. ) ; +#49 = VECTOR ( 'NONE', #532, 1000.000000000000000 ) ; +#50 = FACE_OUTER_BOUND ( 'NONE', #281, .T. ) ; +#51 = AXIS2_PLACEMENT_3D ( 'NONE', #540, #541, #542 ) ; +#52 = CYLINDRICAL_SURFACE ( 'NONE', #14, 30.94748262907080200 ) ; +#53 = CYLINDRICAL_SURFACE ( 'NONE', #7, 34.94748262907079800 ) ; +#54 = AXIS2_PLACEMENT_3D ( 'NONE', #543, #544, #545 ) ; +#55 = FACE_OUTER_BOUND ( 'NONE', #280, .T. ) ; +#56 = STYLED_ITEM ( 'NONE', ( #566 ), #80 ) ; +#57 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #56 ) ) ; +#58 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'base', ( #1193, #1195, #1196, #1198, #1199, #730 ), #785 ) ; +#59 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1072, 'distance_accuracy_value', 'NONE'); +#60 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #511, 'distance_accuracy_value', 'NONE'); +#61 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #567, 'distance_accuracy_value', 'NONE'); +#62 = PRODUCT ( 'base', 'base', '', ( #1079 ) ) ; +#63 = EDGE_CURVE ( 'NONE', #241, #251, #496, .T. ) ; +#64 = EDGE_CURVE ( 'NONE', #241, #249, #500, .T. ) ; +#65 = ADVANCED_FACE ( 'NONE', ( #35 ), #34, .F. ) ; +#66 = ADVANCED_FACE ( 'NONE', ( #36 ), #21, .T. ) ; +#67 = EDGE_CURVE ( 'NONE', #245, #251, #517, .T. ) ; +#68 = ADVANCED_FACE ( 'NONE', ( #24, #22 ), #520, .T. ) ; +#69 = ADVANCED_FACE ( 'NONE', ( #19 ), #45, .T. ) ; +#70 = ADVANCED_FACE ( 'NONE', ( #2 ), #3, .F. ) ; +#71 = EDGE_CURVE ( 'NONE', #239, #252, #530, .T. ) ; +#72 = ADVANCED_FACE ( 'NONE', ( #31 ), #533, .F. ) ; +#73 = ADVANCED_FACE ( 'NONE', ( #50 ), #43, .F. ) ; +#74 = EDGE_CURVE ( 'NONE', #243, #249, #187, .T. ) ; +#75 = ADVANCED_FACE ( 'NONE', ( #44 ), #189, .F. ) ; +#76 = ADVANCED_FACE ( 'NONE', ( #55 ), #52, .F. ) ; +#77 = ADVANCED_FACE ( 'NONE', ( #46, #9 ), #549, .T. ) ; +#78 = ADVANCED_FACE ( 'NONE', ( #48 ), #553, .T. ) ; +#79 = ADVANCED_FACE ( 'NONE', ( #42 ), #557, .T. ) ; +#80 = ADVANCED_FACE ( 'NONE', ( #13 ), #53, .T. ) ; +#81 = ADVANCED_FACE ( 'NONE', ( #17 ), #192, .T. ) ; +#82 = ADVANCED_FACE ( 'NONE', ( #16 ), #12, .T. ) ; +#83 = ADVANCED_FACE ( 'NONE', ( #11 ), #579, .T. ) ; +#84 = EDGE_CURVE ( 'NONE', #323, #324, #191, .T. ) ; +#85 = EDGE_CURVE ( 'NONE', #248, #243, #587, .T. ) ; +#86 = EDGE_CURVE ( 'NONE', #237, #322, #590, .T. ) ; +#87 = ADVANCED_FACE ( 'NONE', ( #1176 ), #586, .F. ) ; +#88 = ADVANCED_FACE ( 'NONE', ( #1139 ), #596, .T. ) ; +#89 = ADVANCED_FACE ( 'NONE', ( #1116 ), #600, .T. ) ; +#90 = ADVANCED_FACE ( 'NONE', ( #1183 ), #604, .F. ) ; +#91 = EDGE_CURVE ( 'NONE', #239, #237, #193, .T. ) ; +#92 = EDGE_CURVE ( 'NONE', #245, #244, #194, .T. ) ; +#93 = EDGE_CURVE ( 'NONE', #242, #247, #615, .T. ) ; +#94 = ADVANCED_FACE ( 'NONE', ( #1155, #1160 ), #614, .T. ) ; +#95 = ADVANCED_FACE ( 'NONE', ( #1118 ), #1089, .F. ) ; +#96 = ADVANCED_FACE ( 'NONE', ( #1128 ), #624, .T. ) ; +#97 = ADVANCED_FACE ( 'NONE', ( #1081 ), #1092, .F. ) ; +#98 = EDGE_CURVE ( 'NONE', #324, #325, #631, .T. ) ; +#99 = ADVANCED_FACE ( 'NONE', ( #1127 ), #195, .T. ) ; +#100 = ADVANCED_FACE ( 'NONE', ( #1182 ), #637, .F. ) ; +#101 = ADVANCED_FACE ( 'NONE', ( #1166 ), #641, .T. ) ; +#102 = ADVANCED_FACE ( 'NONE', ( #1086 ), #645, .F. ) ; +#103 = ADVANCED_FACE ( 'NONE', ( #1083 ), #649, .F. ) ; +#104 = ADVANCED_FACE ( 'NONE', ( #1084 ), #653, .F. ) ; +#105 = ADVANCED_FACE ( 'NONE', ( #1105 ), #657, .T. ) ; +#106 = ADVANCED_FACE ( 'NONE', ( #1100 ), #1185, .F. ) ; +#107 = ADVANCED_FACE ( 'NONE', ( #1158 ), #1101, .F. ) ; +#108 = EDGE_CURVE ( 'NONE', #246, #247, #196, .T. ) ; +#109 = ADVANCED_FACE ( 'NONE', ( #1094 ), #670, .F. ) ; +#110 = EDGE_CURVE ( 'NONE', #237, #239, #198, .T. ) ; +#111 = EDGE_CURVE ( 'NONE', #324, #323, #197, .T. ) ; +#112 = EDGE_CURVE ( 'NONE', #322, #252, #199, .T. ) ; +#113 = EDGE_CURVE ( 'NONE', #251, #238, #200, .T. ) ; +#114 = EDGE_CURVE ( 'NONE', #241, #248, #201, .T. ) ; +#115 = EDGE_CURVE ( 'NONE', #249, #243, #202, .T. ) ; +#116 = EDGE_CURVE ( 'NONE', #325, #326, #203, .T. ) ; +#117 = EDGE_CURVE ( 'NONE', #329, #330, #204, .T. ) ; +#118 = EDGE_CURVE ( 'NONE', #328, #327, #205, .T. ) ; +#119 = EDGE_CURVE ( 'NONE', #327, #330, #702, .T. ) ; +#120 = ADVANCED_FACE ( 'NONE', ( #1161 ), #206, .F. ) ; +#121 = EDGE_CURVE ( 'NONE', #328, #325, #707, .T. ) ; +#122 = EDGE_CURVE ( 'NONE', #327, #328, #207, .T. ) ; +#123 = EDGE_CURVE ( 'NONE', #330, #329, #208, .T. ) ; +#124 = EDGE_CURVE ( 'NONE', #328, #329, #717, .T. ) ; +#125 = EDGE_CURVE ( 'NONE', #326, #325, #209, .T. ) ; +#126 = ADVANCED_FACE ( 'NONE', ( #1165 ), #1134, .F. ) ; +#127 = EDGE_CURVE ( 'NONE', #327, #326, #725, .T. ) ; +#128 = EDGE_CURVE ( 'NONE', #323, #326, #789, .T. ) ; +#129 = EDGE_CURVE ( 'NONE', #240, #250, #792, .T. ) ; +#130 = ADVANCED_FACE ( 'NONE', ( #1178 ), #788, .T. ) ; +#131 = ADVANCED_FACE ( 'NONE', ( #1137 ), #210, .F. ) ; +#132 = EDGE_CURVE ( 'NONE', #248, #241, #211, .T. ) ; +#133 = EDGE_CURVE ( 'NONE', #240, #242, #805, .T. ) ; +#134 = ADVANCED_FACE ( 'NONE', ( #1140 ), #1093, .F. ) ; +#135 = EDGE_CURVE ( 'NONE', #247, #246, #213, .T. ) ; +#136 = EDGE_CURVE ( 'NONE', #250, #246, #814, .T. ) ; +#137 = ADVANCED_FACE ( 'NONE', ( #1159 ), #1126, .F. ) ; +#138 = ADVANCED_FACE ( 'NONE', ( #1096 ), #1138, .F. ) ; +#139 = EDGE_CURVE ( 'NONE', #242, #250, #212, .T. ) ; +#140 = EDGE_CURVE ( 'NONE', #250, #242, #214, .T. ) ; +#141 = EDGE_CURVE ( 'NONE', #333, #332, #829, .T. ) ; +#142 = EDGE_CURVE ( 'NONE', #331, #332, #832, .T. ) ; +#143 = EDGE_CURVE ( 'NONE', #334, #333, #835, .T. ) ; +#144 = EDGE_CURVE ( 'NONE', #334, #331, #838, .T. ) ; +#145 = EDGE_CURVE ( 'NONE', #336, #335, #841, .T. ) ; +#146 = EDGE_CURVE ( 'NONE', #332, #335, #215, .T. ) ; +#147 = EDGE_CURVE ( 'NONE', #333, #336, #216, .T. ) ; +#148 = EDGE_CURVE ( 'NONE', #331, #335, #850, .T. ) ; +#149 = EDGE_CURVE ( 'NONE', #334, #336, #853, .T. ) ; +#150 = EDGE_CURVE ( 'NONE', #337, #339, #856, .T. ) ; +#151 = EDGE_CURVE ( 'NONE', #337, #338, #217, .T. ) ; +#152 = EDGE_CURVE ( 'NONE', #339, #340, #218, .T. ) ; +#153 = EDGE_CURVE ( 'NONE', #338, #340, #865, .T. ) ; +#154 = EDGE_CURVE ( 'NONE', #343, #342, #868, .T. ) ; +#155 = EDGE_CURVE ( 'NONE', #341, #342, #871, .T. ) ; +#156 = EDGE_CURVE ( 'NONE', #344, #343, #874, .T. ) ; +#157 = EDGE_CURVE ( 'NONE', #344, #341, #877, .T. ) ; +#158 = EDGE_CURVE ( 'NONE', #343, #337, #219, .T. ) ; +#159 = EDGE_CURVE ( 'NONE', #342, #339, #220, .T. ) ; +#160 = EDGE_CURVE ( 'NONE', #341, #340, #886, .T. ) ; +#161 = EDGE_CURVE ( 'NONE', #344, #338, #889, .T. ) ; +#162 = EDGE_CURVE ( 'NONE', #347, #346, #892, .T. ) ; +#163 = EDGE_CURVE ( 'NONE', #345, #346, #895, .T. ) ; +#164 = EDGE_CURVE ( 'NONE', #348, #347, #898, .T. ) ; +#165 = EDGE_CURVE ( 'NONE', #348, #345, #901, .T. ) ; +#166 = EDGE_CURVE ( 'NONE', #350, #349, #904, .T. ) ; +#167 = EDGE_CURVE ( 'NONE', #346, #349, #221, .T. ) ; +#168 = EDGE_CURVE ( 'NONE', #347, #350, #222, .T. ) ; +#169 = EDGE_CURVE ( 'NONE', #345, #349, #913, .T. ) ; +#170 = EDGE_CURVE ( 'NONE', #348, #350, #916, .T. ) ; +#171 = EDGE_CURVE ( 'NONE', #353, #352, #919, .T. ) ; +#172 = EDGE_CURVE ( 'NONE', #351, #352, #922, .T. ) ; +#173 = EDGE_CURVE ( 'NONE', #354, #353, #925, .T. ) ; +#174 = EDGE_CURVE ( 'NONE', #354, #351, #928, .T. ) ; +#175 = EDGE_CURVE ( 'NONE', #356, #355, #931, .T. ) ; +#176 = EDGE_CURVE ( 'NONE', #352, #355, #223, .T. ) ; +#177 = EDGE_CURVE ( 'NONE', #353, #356, #224, .T. ) ; +#178 = EDGE_CURVE ( 'NONE', #351, #355, #940, .T. ) ; +#179 = EDGE_CURVE ( 'NONE', #354, #356, #943, .T. ) ; +#180 = EDGE_CURVE ( 'NONE', #244, #245, #225, .T. ) ; +#181 = EDGE_CURVE ( 'NONE', #244, #238, #949, .T. ) ; +#182 = EDGE_CURVE ( 'NONE', #238, #251, #226, .T. ) ; +#183 = EDGE_CURVE ( 'NONE', #248, #238, #955, .T. ) ; +#184 = EDGE_CURVE ( 'NONE', #252, #322, #227, .T. ) ; +#185 = ADVANCED_FACE ( 'NONE', ( #749 ), #228, .F. ) ; +#186 = ADVANCED_FACE ( 'NONE', ( #737 ), #754, .F. ) ; +#187 = CIRCLE ( 'NONE', #51, 15.00000000000000000 ) ; +#188 = COLOUR_RGB ( '',0.2823529411764705800, 0.6627450980392156600, 0.3254901960784313800 ) ; +#189 = CONICAL_SURFACE ( 'NONE', #54, 30.94748262907080200, 0.2150796531012796300 ) ; +#190 = COLOUR_RGB ( '',0.2823529411764705800, 0.6627450980392156600, 0.3254901960784313800 ) ; +#191 = CIRCLE ( 'NONE', #1135, 34.94748262907079800 ) ; +#192 = CONICAL_SURFACE ( 'NONE', #18, 19.00000000000000000, 0.2150796531012795800 ) ; +#193 = CIRCLE ( 'NONE', #1115, 32.94748262907080500 ) ; +#194 = CIRCLE ( 'NONE', #1106, 30.94748262907079800 ) ; +#195 = CONICAL_SURFACE ( 'NONE', #1180, 19.00000000000000000, 0.2150796531012795800 ) ; +#196 = CIRCLE ( 'NONE', #1174, 11.00000000000000000 ) ; +#197 = CIRCLE ( 'NONE', #1179, 34.94748262907079800 ) ; +#198 = CIRCLE ( 'NONE', #1162, 32.94748262907080500 ) ; +#199 = CIRCLE ( 'NONE', #1110, 32.94748262907080500 ) ; +#200 = CIRCLE ( 'NONE', #1170, 30.94748262907080200 ) ; +#201 = CIRCLE ( 'NONE', #1144, 15.00000000000000000 ) ; +#202 = CIRCLE ( 'NONE', #1103, 15.00000000000000000 ) ; +#203 = CIRCLE ( 'NONE', #1151, 34.94748262907079800 ) ; +#204 = CIRCLE ( 'NONE', #1141, 19.00000000000000000 ) ; +#205 = CIRCLE ( 'NONE', #1104, 19.00000000000000000 ) ; +#206 = CONICAL_SURFACE ( 'NONE', #1085, 363.9702342662041600, 0.3490658503988675100 ) ; +#207 = CIRCLE ( 'NONE', #1102, 19.00000000000000000 ) ; +#208 = CIRCLE ( 'NONE', #1157, 19.00000000000000000 ) ; +#209 = CIRCLE ( 'NONE', #1117, 34.94748262907079800 ) ; +#210 = CONICAL_SURFACE ( 'NONE', #1148, 363.9702342662041600, 0.3490658503988675100 ) ; +#211 = CIRCLE ( 'NONE', #1107, 15.00000000000000000 ) ; +#212 = CIRCLE ( 'NONE', #1169, 11.00000000000000000 ) ; +#213 = CIRCLE ( 'NONE', #1152, 11.00000000000000000 ) ; +#214 = CIRCLE ( 'NONE', #1186, 11.00000000000000000 ) ; +#215 = CIRCLE ( 'NONE', #1095, 19.00000000000000000 ) ; +#216 = CIRCLE ( 'NONE', #1136, 19.00000000000000000 ) ; +#217 = CIRCLE ( 'NONE', #1188, 19.00000000000000000 ) ; +#218 = CIRCLE ( 'NONE', #1168, 19.00000000000000000 ) ; +#219 = CIRCLE ( 'NONE', #1142, 19.00000000000000000 ) ; +#220 = CIRCLE ( 'NONE', #1146, 19.00000000000000000 ) ; +#221 = CIRCLE ( 'NONE', #756, 19.00000000000000000 ) ; +#222 = CIRCLE ( 'NONE', #1098, 19.00000000000000000 ) ; +#223 = CIRCLE ( 'NONE', #766, 19.00000000000000000 ) ; +#224 = CIRCLE ( 'NONE', #739, 19.00000000000000000 ) ; +#225 = CIRCLE ( 'NONE', #741, 30.94748262907079800 ) ; +#226 = CIRCLE ( 'NONE', #774, 30.94748262907080200 ) ; +#227 = CIRCLE ( 'NONE', #755, 32.94748262907080500 ) ; +#228 = CONICAL_SURFACE ( 'NONE', #779, 30.94748262907080200, 0.2150796531012796300 ) ; +#229 = COLOUR_RGB ( '',0.2823529411764705800, 0.6627450980392156600, 0.3254901960784313800 ) ; +#230 = COLOUR_RGB ( '',0.2823529411764705800, 0.6627450980392156600, 0.3254901960784313800 ) ; +#231 = COLOUR_RGB ( '',0.2823529411764705800, 0.6627450980392156600, 0.3254901960784313800 ) ; +#232 = COLOUR_RGB ( '',0.2823529411764705800, 0.6627450980392156600, 0.3254901960784313800 ) ; +#233 = COLOUR_RGB ( '',0.2823529411764705800, 0.6627450980392156600, 0.3254901960784313800 ) ; +#234 = COLOUR_RGB ( '',0.2823529411764705800, 0.6627450980392156600, 0.3254901960784313800 ) ; +#235 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #731, #1197 ) ; +#236 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #62 ) ) ; +#237 = VERTEX_POINT ( 'NONE', #966 ) ; +#238 = VERTEX_POINT ( 'NONE', #967 ) ; +#239 = VERTEX_POINT ( 'NONE', #968 ) ; +#240 = VERTEX_POINT ( 'NONE', #969 ) ; +#241 = VERTEX_POINT ( 'NONE', #970 ) ; +#242 = VERTEX_POINT ( 'NONE', #971 ) ; +#243 = VERTEX_POINT ( 'NONE', #972 ) ; +#244 = VERTEX_POINT ( 'NONE', #973 ) ; +#245 = VERTEX_POINT ( 'NONE', #974 ) ; +#246 = VERTEX_POINT ( 'NONE', #975 ) ; +#247 = VERTEX_POINT ( 'NONE', #976 ) ; +#248 = VERTEX_POINT ( 'NONE', #977 ) ; +#249 = VERTEX_POINT ( 'NONE', #978 ) ; +#250 = VERTEX_POINT ( 'NONE', #979 ) ; +#251 = VERTEX_POINT ( 'NONE', #980 ) ; +#252 = VERTEX_POINT ( 'NONE', #981 ) ; +#253 = ORIENTED_EDGE ( 'NONE', *, *, #184, .T. ) ; +#254 = ORIENTED_EDGE ( 'NONE', *, *, #91, .F. ) ; +#255 = ORIENTED_EDGE ( 'NONE', *, *, #84, .T. ) ; +#256 = ORIENTED_EDGE ( 'NONE', *, *, #181, .T. ) ; +#257 = ORIENTED_EDGE ( 'NONE', *, *, #67, .F. ) ; +#258 = ORIENTED_EDGE ( 'NONE', *, *, #182, .T. ) ; +#259 = ORIENTED_EDGE ( 'NONE', *, *, #85, .T. ) ; +#260 = ORIENTED_EDGE ( 'NONE', *, *, #63, .T. ) ; +#261 = ORIENTED_EDGE ( 'NONE', *, *, #182, .F. ) ; +#262 = ORIENTED_EDGE ( 'NONE', *, *, #64, .F. ) ; +#263 = ORIENTED_EDGE ( 'NONE', *, *, #183, .F. ) ; +#264 = ORIENTED_EDGE ( 'NONE', *, *, #132, .T. ) ; +#265 = ORIENTED_EDGE ( 'NONE', *, *, #98, .T. ) ; +#266 = ORIENTED_EDGE ( 'NONE', *, *, #136, .F. ) ; +#267 = ORIENTED_EDGE ( 'NONE', *, *, #135, .T. ) ; +#268 = ORIENTED_EDGE ( 'NONE', *, *, #93, .T. ) ; +#269 = ORIENTED_EDGE ( 'NONE', *, *, #139, .F. ) ; +#270 = ORIENTED_EDGE ( 'NONE', *, *, #133, .T. ) ; +#271 = ORIENTED_EDGE ( 'NONE', *, *, #129, .F. ) ; +#272 = ORIENTED_EDGE ( 'NONE', *, *, #132, .F. ) ; +#273 = ORIENTED_EDGE ( 'NONE', *, *, #74, .T. ) ; +#274 = ORIENTED_EDGE ( 'NONE', *, *, #139, .T. ) ; +#275 = ORIENTED_EDGE ( 'NONE', *, *, #125, .F. ) ; +#276 = EDGE_LOOP ( 'NONE', ( #271, #270, #274 ) ) ; +#277 = EDGE_LOOP ( 'NONE', ( #272, #259, #273, #262 ) ) ; +#278 = EDGE_LOOP ( 'NONE', ( #264, #260, #261, #263 ) ) ; +#279 = EDGE_LOOP ( 'NONE', ( #269, #268, #267, #266 ) ) ; +#280 = EDGE_LOOP ( 'NONE', ( #493, #256, #258, #257 ) ) ; +#281 = EDGE_LOOP ( 'NONE', ( #254, #494, #253, #495 ) ) ; +#282 = EDGE_LOOP ( 'NONE', ( #255, #265, #275, #492 ) ) ; +#283 = EDGE_LOOP ( 'NONE', ( #357, #359, #358, #360 ) ) ; +#284 = EDGE_LOOP ( 'NONE', ( #362, #363, #361, #364 ) ) ; +#285 = EDGE_LOOP ( 'NONE', ( #365, #367, #366, #368 ) ) ; +#286 = EDGE_LOOP ( 'NONE', ( #370, #371, #372, #369 ) ) ; +#287 = EDGE_LOOP ( 'NONE', ( #374, #375, #373, #377 ) ) ; +#288 = EDGE_LOOP ( 'NONE', ( #378, #380 ) ) ; +#289 = EDGE_LOOP ( 'NONE', ( #376, #381 ) ) ; +#290 = EDGE_LOOP ( 'NONE', ( #382, #383, #384, #379 ) ) ; +#291 = EDGE_LOOP ( 'NONE', ( #386, #388 ) ) ; +#292 = EDGE_LOOP ( 'NONE', ( #385, #389 ) ) ; +#293 = EDGE_LOOP ( 'NONE', ( #390, #391, #392, #387 ) ) ; +#294 = EDGE_LOOP ( 'NONE', ( #394, #395, #393, #397 ) ) ; +#295 = EDGE_LOOP ( 'NONE', ( #398, #399, #400, #396 ) ) ; +#296 = EDGE_LOOP ( 'NONE', ( #401, #402 ) ) ; +#297 = EDGE_LOOP ( 'NONE', ( #403, #404, #405 ) ) ; +#298 = EDGE_LOOP ( 'NONE', ( #407, #408, #409, #406 ) ) ; +#299 = EDGE_LOOP ( 'NONE', ( #410, #411 ) ) ; +#300 = EDGE_LOOP ( 'NONE', ( #412, #413 ) ) ; +#301 = EDGE_LOOP ( 'NONE', ( #414, #416, #415, #417 ) ) ; +#302 = EDGE_LOOP ( 'NONE', ( #418, #420, #419, #421 ) ) ; +#303 = EDGE_LOOP ( 'NONE', ( #423, #424, #422, #425 ) ) ; +#304 = EDGE_LOOP ( 'NONE', ( #426, #427, #428 ) ) ; +#305 = EDGE_LOOP ( 'NONE', ( #429, #430, #431 ) ) ; +#306 = EDGE_LOOP ( 'NONE', ( #432, #434, #433, #435 ) ) ; +#307 = EDGE_LOOP ( 'NONE', ( #436, #438, #437, #439 ) ) ; +#308 = EDGE_LOOP ( 'NONE', ( #440, #442, #441, #443 ) ) ; +#309 = EDGE_LOOP ( 'NONE', ( #445, #446, #444, #448 ) ) ; +#310 = EDGE_LOOP ( 'NONE', ( #449, #450, #451, #447 ) ) ; +#311 = EDGE_LOOP ( 'NONE', ( #453, #454, #455, #452 ) ) ; +#312 = EDGE_LOOP ( 'NONE', ( #456, #458, #457, #459 ) ) ; +#313 = EDGE_LOOP ( 'NONE', ( #460, #462, #461, #463 ) ) ; +#314 = EDGE_LOOP ( 'NONE', ( #465, #466, #464, #467 ) ) ; +#315 = EDGE_LOOP ( 'NONE', ( #468, #469, #470 ) ) ; +#316 = EDGE_LOOP ( 'NONE', ( #471, #472, #473 ) ) ; +#317 = EDGE_LOOP ( 'NONE', ( #474, #476, #475, #477 ) ) ; +#318 = EDGE_LOOP ( 'NONE', ( #478, #480, #479, #481 ) ) ; +#319 = EDGE_LOOP ( 'NONE', ( #483, #484, #482, #485 ) ) ; +#320 = EDGE_LOOP ( 'NONE', ( #486, #487, #488 ) ) ; +#321 = EDGE_LOOP ( 'NONE', ( #489, #490, #491 ) ) ; +#322 = VERTEX_POINT ( 'NONE', #982 ) ; +#323 = VERTEX_POINT ( 'NONE', #983 ) ; +#324 = VERTEX_POINT ( 'NONE', #984 ) ; +#325 = VERTEX_POINT ( 'NONE', #985 ) ; +#326 = VERTEX_POINT ( 'NONE', #986 ) ; +#327 = VERTEX_POINT ( 'NONE', #987 ) ; +#328 = VERTEX_POINT ( 'NONE', #988 ) ; +#329 = VERTEX_POINT ( 'NONE', #989 ) ; +#330 = VERTEX_POINT ( 'NONE', #990 ) ; +#331 = VERTEX_POINT ( 'NONE', #991 ) ; +#332 = VERTEX_POINT ( 'NONE', #992 ) ; +#333 = VERTEX_POINT ( 'NONE', #993 ) ; +#334 = VERTEX_POINT ( 'NONE', #994 ) ; +#335 = VERTEX_POINT ( 'NONE', #995 ) ; +#336 = VERTEX_POINT ( 'NONE', #996 ) ; +#337 = VERTEX_POINT ( 'NONE', #997 ) ; +#338 = VERTEX_POINT ( 'NONE', #998 ) ; +#339 = VERTEX_POINT ( 'NONE', #999 ) ; +#340 = VERTEX_POINT ( 'NONE', #1000 ) ; +#341 = VERTEX_POINT ( 'NONE', #1001 ) ; +#342 = VERTEX_POINT ( 'NONE', #1002 ) ; +#343 = VERTEX_POINT ( 'NONE', #1003 ) ; +#344 = VERTEX_POINT ( 'NONE', #1004 ) ; +#345 = VERTEX_POINT ( 'NONE', #1005 ) ; +#346 = VERTEX_POINT ( 'NONE', #1006 ) ; +#347 = VERTEX_POINT ( 'NONE', #1007 ) ; +#348 = VERTEX_POINT ( 'NONE', #1008 ) ; +#349 = VERTEX_POINT ( 'NONE', #1009 ) ; +#350 = VERTEX_POINT ( 'NONE', #1010 ) ; +#351 = VERTEX_POINT ( 'NONE', #1011 ) ; +#352 = VERTEX_POINT ( 'NONE', #1012 ) ; +#353 = VERTEX_POINT ( 'NONE', #1013 ) ; +#354 = VERTEX_POINT ( 'NONE', #1014 ) ; +#355 = VERTEX_POINT ( 'NONE', #1015 ) ; +#356 = VERTEX_POINT ( 'NONE', #1016 ) ; +#357 = ORIENTED_EDGE ( 'NONE', *, *, #122, .F. ) ; +#358 = ORIENTED_EDGE ( 'NONE', *, *, #125, .T. ) ; +#359 = ORIENTED_EDGE ( 'NONE', *, *, #127, .T. ) ; +#360 = ORIENTED_EDGE ( 'NONE', *, *, #121, .F. ) ; +#361 = ORIENTED_EDGE ( 'NONE', *, *, #123, .F. ) ; +#362 = ORIENTED_EDGE ( 'NONE', *, *, #122, .T. ) ; +#363 = ORIENTED_EDGE ( 'NONE', *, *, #124, .T. ) ; +#364 = ORIENTED_EDGE ( 'NONE', *, *, #119, .F. ) ; +#365 = ORIENTED_EDGE ( 'NONE', *, *, #124, .F. ) ; +#366 = ORIENTED_EDGE ( 'NONE', *, *, #119, .T. ) ; +#367 = ORIENTED_EDGE ( 'NONE', *, *, #118, .T. ) ; +#368 = ORIENTED_EDGE ( 'NONE', *, *, #117, .F. ) ; +#369 = ORIENTED_EDGE ( 'NONE', *, *, #116, .T. ) ; +#370 = ORIENTED_EDGE ( 'NONE', *, *, #127, .F. ) ; +#371 = ORIENTED_EDGE ( 'NONE', *, *, #118, .F. ) ; +#372 = ORIENTED_EDGE ( 'NONE', *, *, #121, .T. ) ; +#373 = ORIENTED_EDGE ( 'NONE', *, *, #128, .T. ) ; +#374 = ORIENTED_EDGE ( 'NONE', *, *, #98, .F. ) ; +#375 = ORIENTED_EDGE ( 'NONE', *, *, #111, .T. ) ; +#376 = ORIENTED_EDGE ( 'NONE', *, *, #84, .F. ) ; +#377 = ORIENTED_EDGE ( 'NONE', *, *, #116, .F. ) ; +#378 = ORIENTED_EDGE ( 'NONE', *, *, #110, .T. ) ; +#379 = ORIENTED_EDGE ( 'NONE', *, *, #112, .T. ) ; +#380 = ORIENTED_EDGE ( 'NONE', *, *, #91, .T. ) ; +#381 = ORIENTED_EDGE ( 'NONE', *, *, #111, .F. ) ; +#382 = ORIENTED_EDGE ( 'NONE', *, *, #71, .F. ) ; +#383 = ORIENTED_EDGE ( 'NONE', *, *, #110, .F. ) ; +#384 = ORIENTED_EDGE ( 'NONE', *, *, #86, .T. ) ; +#385 = ORIENTED_EDGE ( 'NONE', *, *, #112, .F. ) ; +#386 = ORIENTED_EDGE ( 'NONE', *, *, #92, .T. ) ; +#387 = ORIENTED_EDGE ( 'NONE', *, *, #113, .T. ) ; +#388 = ORIENTED_EDGE ( 'NONE', *, *, #180, .T. ) ; +#389 = ORIENTED_EDGE ( 'NONE', *, *, #184, .F. ) ; +#390 = ORIENTED_EDGE ( 'NONE', *, *, #181, .F. ) ; +#391 = ORIENTED_EDGE ( 'NONE', *, *, #92, .F. ) ; +#392 = ORIENTED_EDGE ( 'NONE', *, *, #67, .T. ) ; +#393 = ORIENTED_EDGE ( 'NONE', *, *, #183, .T. ) ; +#394 = ORIENTED_EDGE ( 'NONE', *, *, #63, .F. ) ; +#395 = ORIENTED_EDGE ( 'NONE', *, *, #114, .T. ) ; +#396 = ORIENTED_EDGE ( 'NONE', *, *, #115, .T. ) ; +#397 = ORIENTED_EDGE ( 'NONE', *, *, #113, .F. ) ; +#398 = ORIENTED_EDGE ( 'NONE', *, *, #85, .F. ) ; +#399 = ORIENTED_EDGE ( 'NONE', *, *, #114, .F. ) ; +#400 = ORIENTED_EDGE ( 'NONE', *, *, #64, .T. ) ; +#401 = ORIENTED_EDGE ( 'NONE', *, *, #115, .F. ) ; +#402 = ORIENTED_EDGE ( 'NONE', *, *, #74, .F. ) ; +#403 = ORIENTED_EDGE ( 'NONE', *, *, #133, .F. ) ; +#404 = ORIENTED_EDGE ( 'NONE', *, *, #129, .T. ) ; +#405 = ORIENTED_EDGE ( 'NONE', *, *, #140, .T. ) ; +#406 = ORIENTED_EDGE ( 'NONE', *, *, #108, .T. ) ; +#407 = ORIENTED_EDGE ( 'NONE', *, *, #93, .F. ) ; +#408 = ORIENTED_EDGE ( 'NONE', *, *, #140, .F. ) ; +#409 = ORIENTED_EDGE ( 'NONE', *, *, #136, .T. ) ; +#410 = ORIENTED_EDGE ( 'NONE', *, *, #123, .T. ) ; +#411 = ORIENTED_EDGE ( 'NONE', *, *, #117, .T. ) ; +#412 = ORIENTED_EDGE ( 'NONE', *, *, #108, .F. ) ; +#413 = ORIENTED_EDGE ( 'NONE', *, *, #135, .F. ) ; +#414 = ORIENTED_EDGE ( 'NONE', *, *, #142, .T. ) ; +#415 = ORIENTED_EDGE ( 'NONE', *, *, #143, .F. ) ; +#416 = ORIENTED_EDGE ( 'NONE', *, *, #141, .F. ) ; +#417 = ORIENTED_EDGE ( 'NONE', *, *, #144, .T. ) ; +#418 = ORIENTED_EDGE ( 'NONE', *, *, #146, .T. ) ; +#419 = ORIENTED_EDGE ( 'NONE', *, *, #147, .F. ) ; +#420 = ORIENTED_EDGE ( 'NONE', *, *, #145, .F. ) ; +#421 = ORIENTED_EDGE ( 'NONE', *, *, #141, .T. ) ; +#422 = ORIENTED_EDGE ( 'NONE', *, *, #149, .T. ) ; +#423 = ORIENTED_EDGE ( 'NONE', *, *, #148, .F. ) ; +#424 = ORIENTED_EDGE ( 'NONE', *, *, #144, .F. ) ; +#425 = ORIENTED_EDGE ( 'NONE', *, *, #145, .T. ) ; +#426 = ORIENTED_EDGE ( 'NONE', *, *, #143, .T. ) ; +#427 = ORIENTED_EDGE ( 'NONE', *, *, #147, .T. ) ; +#428 = ORIENTED_EDGE ( 'NONE', *, *, #149, .F. ) ; +#429 = ORIENTED_EDGE ( 'NONE', *, *, #142, .F. ) ; +#430 = ORIENTED_EDGE ( 'NONE', *, *, #148, .T. ) ; +#431 = ORIENTED_EDGE ( 'NONE', *, *, #146, .F. ) ; +#432 = ORIENTED_EDGE ( 'NONE', *, *, #151, .F. ) ; +#433 = ORIENTED_EDGE ( 'NONE', *, *, #152, .T. ) ; +#434 = ORIENTED_EDGE ( 'NONE', *, *, #150, .T. ) ; +#435 = ORIENTED_EDGE ( 'NONE', *, *, #153, .F. ) ; +#436 = ORIENTED_EDGE ( 'NONE', *, *, #155, .T. ) ; +#437 = ORIENTED_EDGE ( 'NONE', *, *, #156, .F. ) ; +#438 = ORIENTED_EDGE ( 'NONE', *, *, #154, .F. ) ; +#439 = ORIENTED_EDGE ( 'NONE', *, *, #157, .T. ) ; +#440 = ORIENTED_EDGE ( 'NONE', *, *, #150, .F. ) ; +#441 = ORIENTED_EDGE ( 'NONE', *, *, #154, .T. ) ; +#442 = ORIENTED_EDGE ( 'NONE', *, *, #158, .F. ) ; +#443 = ORIENTED_EDGE ( 'NONE', *, *, #159, .T. ) ; +#444 = ORIENTED_EDGE ( 'NONE', *, *, #161, .T. ) ; +#445 = ORIENTED_EDGE ( 'NONE', *, *, #160, .F. ) ; +#446 = ORIENTED_EDGE ( 'NONE', *, *, #157, .F. ) ; +#447 = ORIENTED_EDGE ( 'NONE', *, *, #161, .F. ) ; +#448 = ORIENTED_EDGE ( 'NONE', *, *, #153, .T. ) ; +#449 = ORIENTED_EDGE ( 'NONE', *, *, #156, .T. ) ; +#450 = ORIENTED_EDGE ( 'NONE', *, *, #158, .T. ) ; +#451 = ORIENTED_EDGE ( 'NONE', *, *, #151, .T. ) ; +#452 = ORIENTED_EDGE ( 'NONE', *, *, #159, .F. ) ; +#453 = ORIENTED_EDGE ( 'NONE', *, *, #155, .F. ) ; +#454 = ORIENTED_EDGE ( 'NONE', *, *, #160, .T. ) ; +#455 = ORIENTED_EDGE ( 'NONE', *, *, #152, .F. ) ; +#456 = ORIENTED_EDGE ( 'NONE', *, *, #163, .T. ) ; +#457 = ORIENTED_EDGE ( 'NONE', *, *, #164, .F. ) ; +#458 = ORIENTED_EDGE ( 'NONE', *, *, #162, .F. ) ; +#459 = ORIENTED_EDGE ( 'NONE', *, *, #165, .T. ) ; +#460 = ORIENTED_EDGE ( 'NONE', *, *, #167, .T. ) ; +#461 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ; +#462 = ORIENTED_EDGE ( 'NONE', *, *, #166, .F. ) ; +#463 = ORIENTED_EDGE ( 'NONE', *, *, #162, .T. ) ; +#464 = ORIENTED_EDGE ( 'NONE', *, *, #170, .T. ) ; +#465 = ORIENTED_EDGE ( 'NONE', *, *, #169, .F. ) ; +#466 = ORIENTED_EDGE ( 'NONE', *, *, #165, .F. ) ; +#467 = ORIENTED_EDGE ( 'NONE', *, *, #166, .T. ) ; +#468 = ORIENTED_EDGE ( 'NONE', *, *, #164, .T. ) ; +#469 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ; +#470 = ORIENTED_EDGE ( 'NONE', *, *, #170, .F. ) ; +#471 = ORIENTED_EDGE ( 'NONE', *, *, #163, .F. ) ; +#472 = ORIENTED_EDGE ( 'NONE', *, *, #169, .T. ) ; +#473 = ORIENTED_EDGE ( 'NONE', *, *, #167, .F. ) ; +#474 = ORIENTED_EDGE ( 'NONE', *, *, #172, .T. ) ; +#475 = ORIENTED_EDGE ( 'NONE', *, *, #173, .F. ) ; +#476 = ORIENTED_EDGE ( 'NONE', *, *, #171, .F. ) ; +#477 = ORIENTED_EDGE ( 'NONE', *, *, #174, .T. ) ; +#478 = ORIENTED_EDGE ( 'NONE', *, *, #176, .T. ) ; +#479 = ORIENTED_EDGE ( 'NONE', *, *, #177, .F. ) ; +#480 = ORIENTED_EDGE ( 'NONE', *, *, #175, .F. ) ; +#481 = ORIENTED_EDGE ( 'NONE', *, *, #171, .T. ) ; +#482 = ORIENTED_EDGE ( 'NONE', *, *, #179, .T. ) ; +#483 = ORIENTED_EDGE ( 'NONE', *, *, #178, .F. ) ; +#484 = ORIENTED_EDGE ( 'NONE', *, *, #174, .F. ) ; +#485 = ORIENTED_EDGE ( 'NONE', *, *, #175, .T. ) ; +#486 = ORIENTED_EDGE ( 'NONE', *, *, #173, .T. ) ; +#487 = ORIENTED_EDGE ( 'NONE', *, *, #177, .T. ) ; +#488 = ORIENTED_EDGE ( 'NONE', *, *, #179, .F. ) ; +#489 = ORIENTED_EDGE ( 'NONE', *, *, #172, .F. ) ; +#490 = ORIENTED_EDGE ( 'NONE', *, *, #178, .T. ) ; +#491 = ORIENTED_EDGE ( 'NONE', *, *, #176, .F. ) ; +#492 = ORIENTED_EDGE ( 'NONE', *, *, #128, .F. ) ; +#493 = ORIENTED_EDGE ( 'NONE', *, *, #180, .F. ) ; +#494 = ORIENTED_EDGE ( 'NONE', *, *, #71, .T. ) ; +#495 = ORIENTED_EDGE ( 'NONE', *, *, #86, .F. ) ; +#496 = LINE ( 'NONE', #497, #32 ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( 3.789973554335987100E-015, 255.0000000000000000, -30.94748262907080200 ) ) ; +#498 = DIRECTION ( 'NONE', ( 2.613705453797209200E-017, 0.9769593973232957300, -0.2134252468235717200 ) ) ; +#499 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#500 = LINE ( 'NONE', #501, #27 ) ; +#501 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -15.00000000000000000 ) ) ; +#502 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#503 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#504 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#505 = FILL_AREA_STYLE_COLOUR ( '', #188 ) ; +#506 = FILL_AREA_STYLE ('',( #505 ) ) ; +#507 = SURFACE_STYLE_FILL_AREA ( #506 ) ; +#508 = SURFACE_SIDE_STYLE ('',( #507 ) ) ; +#509 = SURFACE_STYLE_USAGE ( .BOTH. , #508 ) ; +#510 = PRESENTATION_STYLE_ASSIGNMENT (( #509 ) ) ; +#511 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#512 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#513 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#514 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#515 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#516 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#517 = LINE ( 'NONE', #518, #23 ) ; +#518 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -30.94748262907080200 ) ) ; +#519 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#520 = PLANE ( 'NONE', #47 ) ; +#521 = CARTESIAN_POINT ( 'NONE', ( 34.94748262907079800, 304.0000000000000000, 0.0000000000000000000 ) ) ; +#522 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#523 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#524 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#525 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#526 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#527 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#528 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#529 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#530 = LINE ( 'NONE', #531, #49 ) ; +#531 = CARTESIAN_POINT ( 'NONE', ( 4.034902914165458100E-015, 0.0000000000000000000, 32.94748262907080500 ) ) ; +#532 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#533 = PLANE ( 'NONE', #4 ) ; +#534 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999776200, 40.00000000000000000, 2.679491924311098800 ) ) ; +#535 = DIRECTION ( 'NONE', ( -0.9659258262890699800, 1.757292460697033600E-033, -0.2588190451025145200 ) ) ; +#536 = DIRECTION ( 'NONE', ( -0.2588190451025145200, 0.0000000000000000000, 0.9659258262890699800 ) ) ; +#537 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#538 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#539 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#540 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 166.2222516140007000, 0.0000000000000000000 ) ) ; +#541 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#542 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 255.0000000000000000, 0.0000000000000000000 ) ) ; +#544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#545 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#546 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#547 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#548 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#549 = PLANE ( 'NONE', #1 ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( 32.94748262907080500, 299.0000000000000000, 0.0000000000000000000 ) ) ; +#551 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#552 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#553 = PLANE ( 'NONE', #5 ) ; +#554 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999776200, 40.00000000000000000, 2.679491924311098800 ) ) ; +#555 = DIRECTION ( 'NONE', ( -0.9659258262890699800, 1.757292460697033600E-033, 0.2588190451025145200 ) ) ; +#556 = DIRECTION ( 'NONE', ( 0.2588190451025145200, 0.0000000000000000000, 0.9659258262890699800 ) ) ; +#557 = PLANE ( 'NONE', #40 ) ; +#558 = CARTESIAN_POINT ( 'NONE', ( 2.679491924311132100, 40.00000000000000000, 9.999999999999765500 ) ) ; +#559 = DIRECTION ( 'NONE', ( 0.2588190451025178500, -4.708650957090645300E-034, 0.9659258262890690900 ) ) ; +#560 = DIRECTION ( 'NONE', ( 0.9659258262890690900, 0.0000000000000000000, -0.2588190451025178500 ) ) ; +#561 = FILL_AREA_STYLE_COLOUR ( '', #190 ) ; +#562 = FILL_AREA_STYLE ('',( #561 ) ) ; +#563 = SURFACE_STYLE_FILL_AREA ( #562 ) ; +#564 = SURFACE_SIDE_STYLE ('',( #563 ) ) ; +#565 = SURFACE_STYLE_USAGE ( .BOTH. , #564 ) ; +#566 = PRESENTATION_STYLE_ASSIGNMENT (( #565 ) ) ; +#567 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#568 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#569 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#570 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#571 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#572 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#573 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 182.0000000000000000, 0.0000000000000000000 ) ) ; +#574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#575 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#576 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#577 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#578 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#579 = PLANE ( 'NONE', #1192 ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#581 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#582 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#583 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 304.0000000000000000, 0.0000000000000000000 ) ) ; +#584 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#585 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#586 = PLANE ( 'NONE', #1108 ) ; +#587 = LINE ( 'NONE', #588, #1187 ) ; +#588 = CARTESIAN_POINT ( 'NONE', ( 1.836970198721029600E-015, 0.0000000000000000000, 15.00000000000000000 ) ) ; +#589 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#590 = LINE ( 'NONE', #591, #1125 ) ; +#591 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -32.94748262907080500 ) ) ; +#592 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#593 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999795700, 40.00000000000000000, -2.679491924311029600 ) ) ; +#594 = DIRECTION ( 'NONE', ( 0.9659258262890717500, -1.757292460697036000E-033, 0.2588190451025076900 ) ) ; +#595 = DIRECTION ( 'NONE', ( 0.2588190451025076900, 0.0000000000000000000, -0.9659258262890717500 ) ) ; +#596 = PLANE ( 'NONE', #1120 ) ; +#597 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#598 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#599 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#600 = PLANE ( 'NONE', #1154 ) ; +#601 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#602 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#603 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#604 = PLANE ( 'NONE', #1172 ) ; +#605 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#606 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#607 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#608 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 304.0000000000000000, 0.0000000000000000000 ) ) ; +#609 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#610 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#611 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 299.0000000000000000, 0.0000000000000000000 ) ) ; +#612 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#613 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#614 = PLANE ( 'NONE', #1173 ) ; +#615 = LINE ( 'NONE', #616, #1121 ) ; +#616 = CARTESIAN_POINT ( 'NONE', ( 1.347111479062088400E-015, 0.0000000000000000000, 11.00000000000000000 ) ) ; +#617 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#618 = CARTESIAN_POINT ( 'NONE', ( 19.00000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#619 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#620 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#621 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#622 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#623 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#624 = PLANE ( 'NONE', #1191 ) ; +#625 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999758400, 40.00000000000000000, -2.679491924311168600 ) ) ; +#626 = DIRECTION ( 'NONE', ( 0.9659258262890682000, -1.757292460697030500E-033, -0.2588190451025212900 ) ) ; +#627 = DIRECTION ( 'NONE', ( -0.2588190451025212400, 0.0000000000000000000, -0.9659258262890680900 ) ) ; +#628 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#629 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#630 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#631 = LINE ( 'NONE', #632, #1153 ) ; +#632 = CARTESIAN_POINT ( 'NONE', ( 4.279832273994927700E-015, 0.0000000000000000000, 34.94748262907079800 ) ) ; +#633 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#634 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 182.0000000000000000, 0.0000000000000000000 ) ) ; +#635 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#636 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#637 = PLANE ( 'NONE', #1167 ) ; +#638 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#639 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#640 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#641 = PLANE ( 'NONE', #1097 ) ; +#642 = CARTESIAN_POINT ( 'NONE', ( -2.679491924311201400, 40.00000000000000000, -9.999999999999746000 ) ) ; +#643 = DIRECTION ( 'NONE', ( -0.2588190451025245100, 4.708650957090765900E-034, -0.9659258262890673100 ) ) ; +#644 = DIRECTION ( 'NONE', ( -0.9659258262890672000, 0.0000000000000000000, 0.2588190451025244600 ) ) ; +#645 = PLANE ( 'NONE', #1091 ) ; +#646 = CARTESIAN_POINT ( 'NONE', ( 2.679491924311060600, 40.00000000000000000, -9.999999999999779700 ) ) ; +#647 = DIRECTION ( 'NONE', ( -0.2588190451025110800, 4.708650957090521300E-034, 0.9659258262890708700 ) ) ; +#648 = DIRECTION ( 'NONE', ( 0.9659258262890708700, 0.0000000000000000000, 0.2588190451025110800 ) ) ; +#649 = PLANE ( 'NONE', #1129 ) ; +#650 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#651 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#652 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#653 = PLANE ( 'NONE', #1124 ) ; +#654 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#655 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#656 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#657 = PLANE ( 'NONE', #1119 ) ; +#658 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#659 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#660 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#661 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#662 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#663 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#664 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#665 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#666 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#667 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#668 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#669 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#670 = PLANE ( 'NONE', #1181 ) ; +#671 = CARTESIAN_POINT ( 'NONE', ( -2.679491924310991400, 40.00000000000000000, 9.999999999999801000 ) ) ; +#672 = DIRECTION ( 'NONE', ( 0.2588190451025043600, -4.708650957090399000E-034, -0.9659258262890727500 ) ) ; +#673 = DIRECTION ( 'NONE', ( -0.9659258262890725300, 0.0000000000000000000, -0.2588190451025043100 ) ) ; +#674 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 304.0000000000000000, 0.0000000000000000000 ) ) ; +#675 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#676 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#677 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 304.0000000000000000, 0.0000000000000000000 ) ) ; +#678 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#679 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#680 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 299.0000000000000000, 0.0000000000000000000 ) ) ; +#681 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#682 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#683 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 255.0000000000000000, 0.0000000000000000000 ) ) ; +#684 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#685 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#686 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 182.0000000000000000, 0.0000000000000000000 ) ) ; +#687 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#688 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#689 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 166.2222516140007000, 0.0000000000000000000 ) ) ; +#690 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#691 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#692 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 255.0000000000000000, 0.0000000000000000000 ) ) ; +#693 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#694 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#695 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#696 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#697 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#698 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 182.0000000000000000, 0.0000000000000000000 ) ) ; +#699 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#700 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#701 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -839.7777483859993000, 0.0000000000000000000 ) ) ; +#702 = LINE ( 'NONE', #703, #1133 ) ; +#703 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -19.00000000000000000 ) ) ; +#704 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#705 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#706 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#707 = LINE ( 'NONE', #708, #1132 ) ; +#708 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 182.0000000000000000, 19.00000000000000000 ) ) ; +#709 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9769593973232957300, 0.2134252468235716700 ) ) ; +#710 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 182.0000000000000000, 0.0000000000000000000 ) ) ; +#711 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#712 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#713 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#714 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#715 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#716 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 255.0000000000000000, 0.0000000000000000000 ) ) ; +#717 = LINE ( 'NONE', #718, #1087 ) ; +#718 = CARTESIAN_POINT ( 'NONE', ( 2.326828918379971000E-015, 0.0000000000000000000, 19.00000000000000000 ) ) ; +#719 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#720 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#721 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#722 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#723 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#724 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#725 = LINE ( 'NONE', #726, #1130 ) ; +#726 = CARTESIAN_POINT ( 'NONE', ( 2.326828918379971000E-015, 182.0000000000000000, -19.00000000000000000 ) ) ; +#727 = DIRECTION ( 'NONE', ( 2.613705453797208500E-017, 0.9769593973232957300, -0.2134252468235716700 ) ) ; +#728 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#729 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#730 = AXIS2_PLACEMENT_3D ( 'NONE', #1075, #1076, #1077 ) ; +#731 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #62, .NOT_KNOWN. ) ; +#732 = STYLED_ITEM ( 'NONE', ( #1022 ), #1193 ) ; +#733 = VECTOR ( 'NONE', #942, 1000.000000000000100 ) ; +#734 = VECTOR ( 'NONE', #930, 1000.000000000000000 ) ; +#735 = VECTOR ( 'NONE', #957, 1000.000000000000100 ) ; +#736 = VECTOR ( 'NONE', #951, 1000.000000000000000 ) ; +#737 = FACE_OUTER_BOUND ( 'NONE', #293, .T. ) ; +#738 = VECTOR ( 'NONE', #888, 1000.000000000000000 ) ; +#739 = AXIS2_PLACEMENT_3D ( 'NONE', #936, #937, #938 ) ; +#740 = VECTOR ( 'NONE', #927, 1000.000000000000100 ) ; +#741 = AXIS2_PLACEMENT_3D ( 'NONE', #939, #946, #947 ) ; +#742 = STYLED_ITEM ( 'NONE', ( #1071 ), #58 ) ; +#743 = STYLED_ITEM ( 'NONE', ( #1031 ), #1195 ) ; +#744 = STYLED_ITEM ( 'NONE', ( #1058 ), #1199 ) ; +#745 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #732 ), #781 ) ; +#746 = AXIS2_PLACEMENT_3D ( 'NONE', #963, #964, #965 ) ; +#747 = VECTOR ( 'NONE', #906, 1000.000000000000000 ) ; +#748 = VECTOR ( 'NONE', #897, 1000.000000000000000 ) ; +#749 = FACE_OUTER_BOUND ( 'NONE', #294, .T. ) ; +#750 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #744 ) ) ; +#751 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #743 ) ) ; +#752 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #742 ), #786 ) ; +#753 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #732 ) ) ; +#754 = CYLINDRICAL_SURFACE ( 'NONE', #746, 30.94748262907080200 ) ; +#755 = AXIS2_PLACEMENT_3D ( 'NONE', #954, #958, #959 ) ; +#756 = AXIS2_PLACEMENT_3D ( 'NONE', #885, #907, #908 ) ; +#757 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #744 ), #784 ) ; +#758 = VECTOR ( 'NONE', #918, 1000.000000000000000 ) ; +#759 = VECTOR ( 'NONE', #921, 1000.000000000000000 ) ; +#760 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #742 ) ) ; +#761 = STYLED_ITEM ( 'NONE', ( #1040 ), #1196 ) ; +#762 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #743 ), #776 ) ; +#763 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #761 ), #782 ) ; +#764 = STYLED_ITEM ( 'NONE', ( #1049 ), #1198 ) ; +#765 = VECTOR ( 'NONE', #891, 1000.000000000000000 ) ; +#766 = AXIS2_PLACEMENT_3D ( 'NONE', #912, #934, #935 ) ; +#767 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #764 ), #783 ) ; +#768 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #761 ) ) ; +#769 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #764 ) ) ; +#770 = VECTOR ( 'NONE', #900, 1000.000000000000000 ) ; +#771 = VECTOR ( 'NONE', #903, 1000.000000000000000 ) ; +#772 = VECTOR ( 'NONE', #945, 1000.000000000000100 ) ; +#773 = VECTOR ( 'NONE', #933, 1000.000000000000000 ) ; +#774 = AXIS2_PLACEMENT_3D ( 'NONE', #948, #952, #953 ) ; +#775 = VECTOR ( 'NONE', #915, 1000.000000000000000 ) ; +#776 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1204 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1032, #1033, #1034 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#777 = VECTOR ( 'NONE', #924, 1000.000000000000100 ) ; +#778 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #60 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #511, #512, #513 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#779 = AXIS2_PLACEMENT_3D ( 'NONE', #960, #961, #962 ) ; +#780 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #61 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #567, #568, #569 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#781 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1202 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1023, #1024, #1025 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#782 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1203 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1041, #1042, #1043 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#783 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1200 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1050, #1051, #1052 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#784 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1201 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1059, #1060, #1061 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#785 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #1205 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1062, #1063, #1064 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#786 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #59 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #1072, #1073, #1074 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#787 = VECTOR ( 'NONE', #894, 1000.000000000000000 ) ; +#788 = PLANE ( 'NONE', #1175 ) ; +#789 = LINE ( 'NONE', #790, #1190 ) ; +#790 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -34.94748262907079800 ) ) ; +#791 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#792 = LINE ( 'NONE', #793, #1099 ) ; +#793 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 160.2222516140007000, 0.0000000000000000000 ) ) ; +#794 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9396926207859078700, -0.3420201433256702700 ) ) ; +#795 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 166.2222516140007000, 0.0000000000000000000 ) ) ; +#796 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#797 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#798 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -839.7777483859993000, 0.0000000000000000000 ) ) ; +#799 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#800 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#801 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 182.0000000000000000, 0.0000000000000000000 ) ) ; +#802 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#803 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#804 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#805 = LINE ( 'NONE', #806, #1149 ) ; +#806 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 160.2222516140007000, 0.0000000000000000000 ) ) ; +#807 = DIRECTION ( 'NONE', ( 4.188538737677010900E-017, -0.9396926207859078700, 0.3420201433256702700 ) ) ; +#808 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#809 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#810 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#811 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#812 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#813 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#814 = LINE ( 'NONE', #815, #1189 ) ; +#815 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -11.00000000000000000 ) ) ; +#816 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#817 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#818 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#819 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#820 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#821 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#822 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 130.0000000000000000, 0.0000000000000000000 ) ) ; +#823 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#824 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 130.0000000000000000, 0.0000000000000000000 ) ) ; +#826 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#827 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#828 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#829 = LINE ( 'NONE', #830, #1143 ) ; +#830 = CARTESIAN_POINT ( 'NONE', ( -18.06837055087433800, 40.00000000000000000, 5.876562399591875000 ) ) ; +#831 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#832 = LINE ( 'NONE', #833, #1145 ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( -2.679491924310991400, 0.0000000000000000000, 9.999999999999801000 ) ) ; +#834 = DIRECTION ( 'NONE', ( 0.9659258262890726400, -1.757292460697039100E-033, 0.2588190451025043100 ) ) ; +#835 = LINE ( 'NONE', #836, #1111 ) ; +#836 = CARTESIAN_POINT ( 'NONE', ( -2.679491924310991400, 40.00000000000000000, 9.999999999999801000 ) ) ; +#837 = DIRECTION ( 'NONE', ( 0.9659258262890726400, -1.757292460697039100E-033, 0.2588190451025043100 ) ) ; +#838 = LINE ( 'NONE', #839, #1114 ) ; +#839 = CARTESIAN_POINT ( 'NONE', ( -39.99999999999999300, 40.00000000000000000, 4.232725281383409300E-013 ) ) ; +#840 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#841 = LINE ( 'NONE', #842, #1109 ) ; +#842 = CARTESIAN_POINT ( 'NONE', ( -18.06837055087446600, 40.00000000000000000, -5.876562399591479700 ) ) ; +#843 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#844 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#845 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#846 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#847 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#848 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#849 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#850 = LINE ( 'NONE', #851, #1171 ) ; +#851 = CARTESIAN_POINT ( 'NONE', ( -2.679491924311201400, 0.0000000000000000000, -9.999999999999746000 ) ) ; +#852 = DIRECTION ( 'NONE', ( 0.9659258262890672000, -1.757292460697029200E-033, -0.2588190451025245100 ) ) ; +#853 = LINE ( 'NONE', #854, #1082 ) ; +#854 = CARTESIAN_POINT ( 'NONE', ( -2.679491924311201400, 40.00000000000000000, -9.999999999999746000 ) ) ; +#855 = DIRECTION ( 'NONE', ( 0.9659258262890672000, -1.757292460697029200E-033, -0.2588190451025245100 ) ) ; +#856 = LINE ( 'NONE', #857, #1112 ) ; +#857 = CARTESIAN_POINT ( 'NONE', ( 19.00000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#858 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#859 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#860 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#861 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#862 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#863 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#864 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#865 = LINE ( 'NONE', #866, #1177 ) ; +#866 = CARTESIAN_POINT ( 'NONE', ( 18.06837055087442000, 40.00000000000000000, 5.876562399591625400 ) ) ; +#867 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#868 = LINE ( 'NONE', #869, #1184 ) ; +#869 = CARTESIAN_POINT ( 'NONE', ( 18.06837055087438100, 40.00000000000000000, -5.876562399591743500 ) ) ; +#870 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#871 = LINE ( 'NONE', #872, #1113 ) ; +#872 = CARTESIAN_POINT ( 'NONE', ( 2.679491924311060600, 0.0000000000000000000, -9.999999999999779700 ) ) ; +#873 = DIRECTION ( 'NONE', ( -0.9659258262890708700, 1.757292460697036000E-033, -0.2588190451025110800 ) ) ; +#874 = LINE ( 'NONE', #875, #1122 ) ; +#875 = CARTESIAN_POINT ( 'NONE', ( 2.679491924311060600, 40.00000000000000000, -9.999999999999779700 ) ) ; +#876 = DIRECTION ( 'NONE', ( -0.9659258262890708700, 1.757292460697036000E-033, -0.2588190451025110800 ) ) ; +#877 = LINE ( 'NONE', #878, #1163 ) ; +#878 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, 40.00000000000000000, -1.387778780781445700E-013 ) ) ; +#879 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#880 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#881 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#882 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#883 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#884 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#885 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#886 = LINE ( 'NONE', #887, #738 ) ; +#887 = CARTESIAN_POINT ( 'NONE', ( 2.679491924311132100, 0.0000000000000000000, 9.999999999999765500 ) ) ; +#888 = DIRECTION ( 'NONE', ( -0.9659258262890690900, 1.757292460697032600E-033, 0.2588190451025178500 ) ) ; +#889 = LINE ( 'NONE', #890, #765 ) ; +#890 = CARTESIAN_POINT ( 'NONE', ( 2.679491924311132100, 40.00000000000000000, 9.999999999999765500 ) ) ; +#891 = DIRECTION ( 'NONE', ( -0.9659258262890690900, 1.757292460697032600E-033, 0.2588190451025178500 ) ) ; +#892 = LINE ( 'NONE', #893, #787 ) ; +#893 = CARTESIAN_POINT ( 'NONE', ( 5.876562399591681400, 40.00000000000000000, 18.06837055087440200 ) ) ; +#894 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#895 = LINE ( 'NONE', #896, #748 ) ; +#896 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999776200, 0.0000000000000000000, 2.679491924311098800 ) ) ; +#897 = DIRECTION ( 'NONE', ( 0.2588190451025145200, -4.708650957090588900E-034, -0.9659258262890699800 ) ) ; +#898 = LINE ( 'NONE', #899, #770 ) ; +#899 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999776200, 40.00000000000000000, 2.679491924311098800 ) ) ; +#900 = DIRECTION ( 'NONE', ( 0.2588190451025145200, -4.708650957090588900E-034, -0.9659258262890699800 ) ) ; +#901 = LINE ( 'NONE', #902, #771 ) ; +#902 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976807100E-015, 40.00000000000000000, 39.99999999999999300 ) ) ; +#903 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#904 = LINE ( 'NONE', #905, #747 ) ; +#905 = CARTESIAN_POINT ( 'NONE', ( -5.876562399591686700, 40.00000000000000000, 18.06837055087440200 ) ) ; +#906 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#907 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#908 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#909 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#910 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#911 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#912 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#913 = LINE ( 'NONE', #914, #775 ) ; +#914 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999776200, 0.0000000000000000000, 2.679491924311098800 ) ) ; +#915 = DIRECTION ( 'NONE', ( -0.2588190451025145200, 4.708650957090582000E-034, -0.9659258262890699800 ) ) ; +#916 = LINE ( 'NONE', #917, #758 ) ; +#917 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999776200, 40.00000000000000000, 2.679491924311098800 ) ) ; +#918 = DIRECTION ( 'NONE', ( -0.2588190451025145200, 4.708650957090582000E-034, -0.9659258262890699800 ) ) ; +#919 = LINE ( 'NONE', #920, #759 ) ; +#920 = CARTESIAN_POINT ( 'NONE', ( -5.876562399591810100, 40.00000000000000000, -18.06837055087435900 ) ) ; +#921 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#922 = LINE ( 'NONE', #923, #777 ) ; +#923 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999795700, 0.0000000000000000000, -2.679491924311029600 ) ) ; +#924 = DIRECTION ( 'NONE', ( -0.2588190451025076900, 4.708650957090465700E-034, 0.9659258262890717500 ) ) ; +#925 = LINE ( 'NONE', #926, #740 ) ; +#926 = CARTESIAN_POINT ( 'NONE', ( -9.999999999999795700, 40.00000000000000000, -2.679491924311029600 ) ) ; +#927 = DIRECTION ( 'NONE', ( -0.2588190451025076900, 4.708650957090465700E-034, 0.9659258262890717500 ) ) ; +#928 = LINE ( 'NONE', #929, #734 ) ; +#929 = CARTESIAN_POINT ( 'NONE', ( -2.827599265842195600E-013, 40.00000000000000000, -39.99999999999999300 ) ) ; +#930 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#931 = LINE ( 'NONE', #932, #773 ) ; +#932 = CARTESIAN_POINT ( 'NONE', ( 5.876562399591559700, 40.00000000000000000, -18.06837055087444100 ) ) ; +#933 = DIRECTION ( 'NONE', ( -1.819283026573857600E-033, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#934 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#935 = DIRECTION ( 'NONE', ( 1.000000000000000000, -1.819283026573858300E-033, 0.0000000000000000000 ) ) ; +#936 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 40.00000000000000000, 0.0000000000000000000 ) ) ; +#937 = DIRECTION ( 'NONE', ( -1.819283026573858300E-033, -1.000000000000000000, 3.421138828918009700E-049 ) ) ; +#938 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#939 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 299.0000000000000000, 0.0000000000000000000 ) ) ; +#940 = LINE ( 'NONE', #941, #733 ) ; +#941 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999758400, 0.0000000000000000000, -2.679491924311168600 ) ) ; +#942 = DIRECTION ( 'NONE', ( 0.2588190451025212400, -4.708650957090704300E-034, 0.9659258262890680900 ) ) ; +#943 = LINE ( 'NONE', #944, #772 ) ; +#944 = CARTESIAN_POINT ( 'NONE', ( 9.999999999999758400, 40.00000000000000000, -2.679491924311168600 ) ) ; +#945 = DIRECTION ( 'NONE', ( 0.2588190451025212400, -4.708650957090704300E-034, 0.9659258262890680900 ) ) ; +#946 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#947 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#948 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 255.0000000000000000, 0.0000000000000000000 ) ) ; +#949 = LINE ( 'NONE', #950, #736 ) ; +#950 = CARTESIAN_POINT ( 'NONE', ( 3.789973554335987100E-015, 0.0000000000000000000, 30.94748262907080200 ) ) ; +#951 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#952 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#953 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#954 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 299.0000000000000000, 0.0000000000000000000 ) ) ; +#955 = LINE ( 'NONE', #956, #735 ) ; +#956 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 255.0000000000000000, 30.94748262907080200 ) ) ; +#957 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.9769593973232957300, 0.2134252468235717200 ) ) ; +#958 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#959 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#960 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 255.0000000000000000, 0.0000000000000000000 ) ) ; +#961 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#962 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#963 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#964 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#965 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#966 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 304.0000000000000000, -32.94748262907080500 ) ) ; +#967 = CARTESIAN_POINT ( 'NONE', ( 3.789973554335987900E-015, 255.0000000000000000, 30.94748262907080500 ) ) ; +#968 = CARTESIAN_POINT ( 'NONE', ( 4.034902914165458900E-015, 304.0000000000000000, 32.94748262907080500 ) ) ; +#969 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 160.2222516140007000, 0.0000000000000000000 ) ) ; +#970 = CARTESIAN_POINT ( 'NONE', ( 2.813471876528508300E-015, 182.0000000000000000, -15.00000000000000000 ) ) ; +#971 = CARTESIAN_POINT ( 'NONE', ( 1.347111479062088400E-015, 130.0000000000000000, 11.00000000000000000 ) ) ; +#972 = CARTESIAN_POINT ( 'NONE', ( 1.836970198721029600E-015, 166.2222516140007000, 15.00000000000000000 ) ) ; +#973 = CARTESIAN_POINT ( 'NONE', ( 3.789973554335987100E-015, 299.0000000000000000, 30.94748262907079800 ) ) ; +#974 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 299.0000000000000000, -30.94748262907079800 ) ) ; +#975 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -11.00000000000000000 ) ) ; +#976 = CARTESIAN_POINT ( 'NONE', ( 1.347111479062088800E-015, 0.0000000000000000000, 11.00000000000000000 ) ) ; +#977 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 182.0000000000000000, 15.00000000000000000 ) ) ; +#978 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 166.2222516140007000, -15.00000000000000000 ) ) ; +#979 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 130.0000000000000000, -11.00000000000000000 ) ) ; +#980 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 255.0000000000000000, -30.94748262907080200 ) ) ; +#981 = CARTESIAN_POINT ( 'NONE', ( 4.034902914165458900E-015, 299.0000000000000000, 32.94748262907080500 ) ) ; +#982 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 299.0000000000000000, -32.94748262907080500 ) ) ; +#983 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 304.0000000000000000, -34.94748262907079800 ) ) ; +#984 = CARTESIAN_POINT ( 'NONE', ( 4.279832273994927700E-015, 304.0000000000000000, 34.94748262907079800 ) ) ; +#985 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 255.0000000000000000, 34.94748262907079800 ) ) ; +#986 = CARTESIAN_POINT ( 'NONE', ( 4.279832273994927700E-015, 255.0000000000000000, -34.94748262907079800 ) ) ; +#987 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 182.0000000000000000, -19.00000000000000000 ) ) ; +#988 = CARTESIAN_POINT ( 'NONE', ( 2.326828918379971000E-015, 182.0000000000000000, 19.00000000000000000 ) ) ; +#989 = CARTESIAN_POINT ( 'NONE', ( 2.326828918379971000E-015, 0.0000000000000000000, 19.00000000000000000 ) ) ; +#990 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -19.00000000000000000 ) ) ; +#991 = CARTESIAN_POINT ( 'NONE', ( -39.99999999999999300, 0.0000000000000000000, 4.232725281383409300E-013 ) ) ; +#992 = CARTESIAN_POINT ( 'NONE', ( -18.06837055087433800, 0.0000000000000000000, 5.876562399591875000 ) ) ; +#993 = CARTESIAN_POINT ( 'NONE', ( -18.06837055087433800, 40.00000000000000000, 5.876562399591875000 ) ) ; +#994 = CARTESIAN_POINT ( 'NONE', ( -39.99999999999999300, 40.00000000000000000, 4.232725281383409300E-013 ) ) ; +#995 = CARTESIAN_POINT ( 'NONE', ( -18.06837055087446600, 0.0000000000000000000, -5.876562399591479700 ) ) ; +#996 = CARTESIAN_POINT ( 'NONE', ( -18.06837055087446600, 40.00000000000000000, -5.876562399591479700 ) ) ; +#997 = CARTESIAN_POINT ( 'NONE', ( 19.00000000000000000, 40.00000000000000000, 1.182563762570627400E-080 ) ) ; +#998 = CARTESIAN_POINT ( 'NONE', ( 18.06837055087442000, 40.00000000000000000, 5.876562399591625400 ) ) ; +#999 = CARTESIAN_POINT ( 'NONE', ( 19.00000000000000000, -3.456637750490330600E-032, 1.182563762570627400E-080 ) ) ; +#1000 = CARTESIAN_POINT ( 'NONE', ( 18.06837055087442000, 0.0000000000000000000, 5.876562399591625400 ) ) ; +#1001 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, 0.0000000000000000000, -1.387778780781445700E-013 ) ) ; +#1002 = CARTESIAN_POINT ( 'NONE', ( 18.06837055087438100, 0.0000000000000000000, -5.876562399591743500 ) ) ; +#1003 = CARTESIAN_POINT ( 'NONE', ( 18.06837055087438100, 40.00000000000000000, -5.876562399591743500 ) ) ; +#1004 = CARTESIAN_POINT ( 'NONE', ( 40.00000000000000700, 40.00000000000000000, -1.387778780781445700E-013 ) ) ; +#1005 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976807100E-015, 0.0000000000000000000, 39.99999999999999300 ) ) ; +#1006 = CARTESIAN_POINT ( 'NONE', ( 5.876562399591681400, 0.0000000000000000000, 18.06837055087440200 ) ) ; +#1007 = CARTESIAN_POINT ( 'NONE', ( 5.876562399591681400, 40.00000000000000000, 18.06837055087440200 ) ) ; +#1008 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976807100E-015, 40.00000000000000000, 39.99999999999999300 ) ) ; +#1009 = CARTESIAN_POINT ( 'NONE', ( -5.876562399591686700, 0.0000000000000000000, 18.06837055087440200 ) ) ; +#1010 = CARTESIAN_POINT ( 'NONE', ( -5.876562399591686700, 40.00000000000000000, 18.06837055087440200 ) ) ; +#1011 = CARTESIAN_POINT ( 'NONE', ( -2.827599265842195600E-013, 0.0000000000000000000, -39.99999999999999300 ) ) ; +#1012 = CARTESIAN_POINT ( 'NONE', ( -5.876562399591810100, 0.0000000000000000000, -18.06837055087435900 ) ) ; +#1013 = CARTESIAN_POINT ( 'NONE', ( -5.876562399591810100, 40.00000000000000000, -18.06837055087435900 ) ) ; +#1014 = CARTESIAN_POINT ( 'NONE', ( -2.827599265842195600E-013, 40.00000000000000000, -39.99999999999999300 ) ) ; +#1015 = CARTESIAN_POINT ( 'NONE', ( 5.876562399591559700, 0.0000000000000000000, -18.06837055087444100 ) ) ; +#1016 = CARTESIAN_POINT ( 'NONE', ( 5.876562399591559700, 40.00000000000000000, -18.06837055087444100 ) ) ; +#1017 = FILL_AREA_STYLE_COLOUR ( '', #234 ) ; +#1018 = FILL_AREA_STYLE ('',( #1017 ) ) ; +#1019 = SURFACE_STYLE_FILL_AREA ( #1018 ) ; +#1020 = SURFACE_SIDE_STYLE ('',( #1019 ) ) ; +#1021 = SURFACE_STYLE_USAGE ( .BOTH. , #1020 ) ; +#1022 = PRESENTATION_STYLE_ASSIGNMENT (( #1021 ) ) ; +#1023 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1024 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1025 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1026 = FILL_AREA_STYLE_COLOUR ( '', #231 ) ; +#1027 = FILL_AREA_STYLE ('',( #1026 ) ) ; +#1028 = SURFACE_STYLE_FILL_AREA ( #1027 ) ; +#1029 = SURFACE_SIDE_STYLE ('',( #1028 ) ) ; +#1030 = SURFACE_STYLE_USAGE ( .BOTH. , #1029 ) ; +#1031 = PRESENTATION_STYLE_ASSIGNMENT (( #1030 ) ) ; +#1032 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1033 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1034 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1035 = FILL_AREA_STYLE_COLOUR ( '', #229 ) ; +#1036 = FILL_AREA_STYLE ('',( #1035 ) ) ; +#1037 = SURFACE_STYLE_FILL_AREA ( #1036 ) ; +#1038 = SURFACE_SIDE_STYLE ('',( #1037 ) ) ; +#1039 = SURFACE_STYLE_USAGE ( .BOTH. , #1038 ) ; +#1040 = PRESENTATION_STYLE_ASSIGNMENT (( #1039 ) ) ; +#1041 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1042 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1043 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1044 = FILL_AREA_STYLE_COLOUR ( '', #233 ) ; +#1045 = FILL_AREA_STYLE ('',( #1044 ) ) ; +#1046 = SURFACE_STYLE_FILL_AREA ( #1045 ) ; +#1047 = SURFACE_SIDE_STYLE ('',( #1046 ) ) ; +#1048 = SURFACE_STYLE_USAGE ( .BOTH. , #1047 ) ; +#1049 = PRESENTATION_STYLE_ASSIGNMENT (( #1048 ) ) ; +#1050 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1051 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1052 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1053 = FILL_AREA_STYLE_COLOUR ( '', #230 ) ; +#1054 = FILL_AREA_STYLE ('',( #1053 ) ) ; +#1055 = SURFACE_STYLE_FILL_AREA ( #1054 ) ; +#1056 = SURFACE_SIDE_STYLE ('',( #1055 ) ) ; +#1057 = SURFACE_STYLE_USAGE ( .BOTH. , #1056 ) ; +#1058 = PRESENTATION_STYLE_ASSIGNMENT (( #1057 ) ) ; +#1059 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1060 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1061 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1062 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1063 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1064 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1065 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #728 ) ; +#1066 = FILL_AREA_STYLE_COLOUR ( '', #232 ) ; +#1067 = FILL_AREA_STYLE ('',( #1066 ) ) ; +#1068 = SURFACE_STYLE_FILL_AREA ( #1067 ) ; +#1069 = SURFACE_SIDE_STYLE ('',( #1068 ) ) ; +#1070 = SURFACE_STYLE_USAGE ( .BOTH. , #1069 ) ; +#1071 = PRESENTATION_STYLE_ASSIGNMENT (( #1070 ) ) ; +#1072 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#1073 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#1074 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#1075 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1076 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#1077 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#1078 = SHAPE_DEFINITION_REPRESENTATION ( #1194, #58 ) ; +#1079 = PRODUCT_CONTEXT ( 'NONE', #728, 'mechanical' ) ; +#1080 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #729 ) ; +#1081 = FACE_OUTER_BOUND ( 'NONE', #302, .T. ) ; +#1082 = VECTOR ( 'NONE', #855, 1000.000000000000200 ) ; +#1083 = FACE_OUTER_BOUND ( 'NONE', #315, .T. ) ; +#1084 = FACE_OUTER_BOUND ( 'NONE', #320, .T. ) ; +#1085 = AXIS2_PLACEMENT_3D ( 'NONE', #701, #705, #706 ) ; +#1086 = FACE_OUTER_BOUND ( 'NONE', #307, .T. ) ; +#1087 = VECTOR ( 'NONE', #719, 1000.000000000000000 ) ; +#1088 = AXIS2_PLACEMENT_3D ( 'NONE', #661, #662, #663 ) ; +#1089 = CYLINDRICAL_SURFACE ( 'NONE', #1156, 19.00000000000000000 ) ; +#1090 = AXIS2_PLACEMENT_3D ( 'NONE', #722, #723, #724 ) ; +#1091 = AXIS2_PLACEMENT_3D ( 'NONE', #646, #647, #648 ) ; +#1092 = CYLINDRICAL_SURFACE ( 'NONE', #1123, 19.00000000000000000 ) ; +#1093 = CYLINDRICAL_SURFACE ( 'NONE', #1147, 15.00000000000000000 ) ; +#1094 = FACE_OUTER_BOUND ( 'NONE', #301, .T. ) ; +#1095 = AXIS2_PLACEMENT_3D ( 'NONE', #828, #844, #845 ) ; +#1096 = FACE_OUTER_BOUND ( 'NONE', #279, .T. ) ; +#1097 = AXIS2_PLACEMENT_3D ( 'NONE', #642, #643, #644 ) ; +#1098 = AXIS2_PLACEMENT_3D ( 'NONE', #909, #910, #911 ) ; +#1099 = VECTOR ( 'NONE', #794, 1000.000000000000000 ) ; +#1100 = FACE_OUTER_BOUND ( 'NONE', #308, .T. ) ; +#1101 = CYLINDRICAL_SURFACE ( 'NONE', #1150, 19.00000000000000000 ) ; +#1102 = AXIS2_PLACEMENT_3D ( 'NONE', #710, #711, #712 ) ; +#1103 = AXIS2_PLACEMENT_3D ( 'NONE', #689, #690, #691 ) ; +#1104 = AXIS2_PLACEMENT_3D ( 'NONE', #698, #699, #700 ) ; +#1105 = FACE_OUTER_BOUND ( 'NONE', #305, .T. ) ; +#1106 = AXIS2_PLACEMENT_3D ( 'NONE', #611, #612, #613 ) ; +#1107 = AXIS2_PLACEMENT_3D ( 'NONE', #801, #802, #803 ) ; +#1108 = AXIS2_PLACEMENT_3D ( 'NONE', #593, #594, #595 ) ; +#1109 = VECTOR ( 'NONE', #843, 1000.000000000000000 ) ; +#1110 = AXIS2_PLACEMENT_3D ( 'NONE', #680, #681, #682 ) ; +#1111 = VECTOR ( 'NONE', #837, 1000.000000000000000 ) ; +#1112 = VECTOR ( 'NONE', #858, 1000.000000000000000 ) ; +#1113 = VECTOR ( 'NONE', #873, 1000.000000000000100 ) ; +#1114 = VECTOR ( 'NONE', #840, 1000.000000000000000 ) ; +#1115 = AXIS2_PLACEMENT_3D ( 'NONE', #608, #609, #610 ) ; +#1116 = FACE_OUTER_BOUND ( 'NONE', #311, .T. ) ; +#1117 = AXIS2_PLACEMENT_3D ( 'NONE', #716, #720, #721 ) ; +#1118 = FACE_OUTER_BOUND ( 'NONE', #318, .T. ) ; +#1119 = AXIS2_PLACEMENT_3D ( 'NONE', #658, #659, #660 ) ; +#1120 = AXIS2_PLACEMENT_3D ( 'NONE', #597, #598, #599 ) ; +#1121 = VECTOR ( 'NONE', #617, 1000.000000000000000 ) ; +#1122 = VECTOR ( 'NONE', #876, 1000.000000000000100 ) ; +#1123 = AXIS2_PLACEMENT_3D ( 'NONE', #628, #629, #630 ) ; +#1124 = AXIS2_PLACEMENT_3D ( 'NONE', #654, #655, #656 ) ; +#1125 = VECTOR ( 'NONE', #592, 1000.000000000000000 ) ; +#1126 = CYLINDRICAL_SURFACE ( 'NONE', #1164, 15.00000000000000000 ) ; +#1127 = FACE_OUTER_BOUND ( 'NONE', #283, .T. ) ; +#1128 = FACE_OUTER_BOUND ( 'NONE', #319, .T. ) ; +#1129 = AXIS2_PLACEMENT_3D ( 'NONE', #650, #651, #652 ) ; +#1130 = VECTOR ( 'NONE', #727, 1000.000000000000100 ) ; +#1131 = AXIS2_PLACEMENT_3D ( 'NONE', #819, #820, #821 ) ; +#1132 = VECTOR ( 'NONE', #709, 1000.000000000000100 ) ; +#1133 = VECTOR ( 'NONE', #704, 1000.000000000000000 ) ; +#1134 = CYLINDRICAL_SURFACE ( 'NONE', #1090, 11.00000000000000000 ) ; +#1135 = AXIS2_PLACEMENT_3D ( 'NONE', #583, #584, #585 ) ; +#1136 = AXIS2_PLACEMENT_3D ( 'NONE', #846, #847, #848 ) ; +#1137 = FACE_OUTER_BOUND ( 'NONE', #276, .T. ) ; +#1138 = CYLINDRICAL_SURFACE ( 'NONE', #1131, 11.00000000000000000 ) ; +#1139 = FACE_OUTER_BOUND ( 'NONE', #316, .T. ) ; +#1140 = FACE_OUTER_BOUND ( 'NONE', #277, .T. ) ; +#1141 = AXIS2_PLACEMENT_3D ( 'NONE', #695, #696, #697 ) ; +#1142 = AXIS2_PLACEMENT_3D ( 'NONE', #864, #880, #881 ) ; +#1143 = VECTOR ( 'NONE', #831, 1000.000000000000000 ) ; +#1144 = AXIS2_PLACEMENT_3D ( 'NONE', #686, #687, #688 ) ; +#1145 = VECTOR ( 'NONE', #834, 1000.000000000000000 ) ; +#1146 = AXIS2_PLACEMENT_3D ( 'NONE', #882, #883, #884 ) ; +#1147 = AXIS2_PLACEMENT_3D ( 'NONE', #804, #808, #809 ) ; +#1148 = AXIS2_PLACEMENT_3D ( 'NONE', #798, #799, #800 ) ; +#1149 = VECTOR ( 'NONE', #807, 1000.000000000000000 ) ; +#1150 = AXIS2_PLACEMENT_3D ( 'NONE', #664, #665, #666 ) ; +#1151 = AXIS2_PLACEMENT_3D ( 'NONE', #692, #693, #694 ) ; +#1152 = AXIS2_PLACEMENT_3D ( 'NONE', #810, #811, #812 ) ; +#1153 = VECTOR ( 'NONE', #633, 1000.000000000000000 ) ; +#1154 = AXIS2_PLACEMENT_3D ( 'NONE', #601, #602, #603 ) ; +#1155 = FACE_OUTER_BOUND ( 'NONE', #299, .T. ) ; +#1156 = AXIS2_PLACEMENT_3D ( 'NONE', #621, #622, #623 ) ; +#1157 = AXIS2_PLACEMENT_3D ( 'NONE', #713, #714, #715 ) ; +#1158 = FACE_OUTER_BOUND ( 'NONE', #306, .T. ) ; +#1159 = FACE_OUTER_BOUND ( 'NONE', #295, .T. ) ; +#1160 = FACE_BOUND ( 'NONE', #300, .T. ) ; +#1161 = FACE_OUTER_BOUND ( 'NONE', #297, .T. ) ; +#1162 = AXIS2_PLACEMENT_3D ( 'NONE', #674, #675, #676 ) ; +#1163 = VECTOR ( 'NONE', #879, 1000.000000000000000 ) ; +#1164 = AXIS2_PLACEMENT_3D ( 'NONE', #813, #817, #818 ) ; +#1165 = FACE_OUTER_BOUND ( 'NONE', #298, .T. ) ; +#1166 = FACE_OUTER_BOUND ( 'NONE', #303, .T. ) ; +#1167 = AXIS2_PLACEMENT_3D ( 'NONE', #638, #639, #640 ) ; +#1168 = AXIS2_PLACEMENT_3D ( 'NONE', #861, #862, #863 ) ; +#1169 = AXIS2_PLACEMENT_3D ( 'NONE', #822, #823, #824 ) ; +#1170 = AXIS2_PLACEMENT_3D ( 'NONE', #683, #684, #685 ) ; +#1171 = VECTOR ( 'NONE', #852, 1000.000000000000200 ) ; +#1172 = AXIS2_PLACEMENT_3D ( 'NONE', #605, #606, #607 ) ; +#1173 = AXIS2_PLACEMENT_3D ( 'NONE', #618, #619, #620 ) ; +#1174 = AXIS2_PLACEMENT_3D ( 'NONE', #667, #668, #669 ) ; +#1175 = AXIS2_PLACEMENT_3D ( 'NONE', #795, #796, #797 ) ; +#1176 = FACE_OUTER_BOUND ( 'NONE', #317, .T. ) ; +#1177 = VECTOR ( 'NONE', #867, 1000.000000000000000 ) ; +#1178 = FACE_OUTER_BOUND ( 'NONE', #296, .T. ) ; +#1179 = AXIS2_PLACEMENT_3D ( 'NONE', #677, #678, #679 ) ; +#1180 = AXIS2_PLACEMENT_3D ( 'NONE', #634, #635, #636 ) ; +#1181 = AXIS2_PLACEMENT_3D ( 'NONE', #671, #672, #673 ) ; +#1182 = FACE_OUTER_BOUND ( 'NONE', #304, .T. ) ; +#1183 = FACE_OUTER_BOUND ( 'NONE', #310, .T. ) ; +#1184 = VECTOR ( 'NONE', #870, 1000.000000000000000 ) ; +#1185 = CYLINDRICAL_SURFACE ( 'NONE', #1088, 19.00000000000000000 ) ; +#1186 = AXIS2_PLACEMENT_3D ( 'NONE', #825, #826, #827 ) ; +#1187 = VECTOR ( 'NONE', #589, 1000.000000000000000 ) ; +#1188 = AXIS2_PLACEMENT_3D ( 'NONE', #849, #859, #860 ) ; +#1189 = VECTOR ( 'NONE', #816, 1000.000000000000000 ) ; +#1190 = VECTOR ( 'NONE', #791, 1000.000000000000000 ) ; +#1191 = AXIS2_PLACEMENT_3D ( 'NONE', #625, #626, #627 ) ; +#1192 = AXIS2_PLACEMENT_3D ( 'NONE', #580, #581, #582 ) ; +#1193 = MANIFOLD_SOLID_BREP ( 'Revolve1', #8 ) ; +#1194 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #235 ) ; +#1195 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1[1]', #37 ) ; +#1196 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1[2]', #39 ) ; +#1197 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #729, 'design' ) ; +#1198 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1[3]', #41 ) ; +#1199 = MANIFOLD_SOLID_BREP ( 'Boss-Extrude1[4]', #38 ) ; +#1200 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1050, 'distance_accuracy_value', 'NONE'); +#1201 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1059, 'distance_accuracy_value', 'NONE'); +#1202 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1023, 'distance_accuracy_value', 'NONE'); +#1203 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1041, 'distance_accuracy_value', 'NONE'); +#1204 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1032, 'distance_accuracy_value', 'NONE'); +#1205 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #1062, 'distance_accuracy_value', 'NONE'); +ENDSEC; +END-ISO-10303-21; diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/fuse.step b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/fuse.step new file mode 100644 index 0000000..0ebe314 --- /dev/null +++ b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/fuse.step @@ -0,0 +1,907 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('fuse.step', + '2014-03-25T03:38:13', + ( 'eric' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2012', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = VECTOR ( 'NONE', #443, 1000.000000000000000 ) ; +#2 = CYLINDRICAL_SURFACE ( 'NONE', #13, 33.00000000000000000 ) ; +#3 = VECTOR ( 'NONE', #440, 1000.000000000000000 ) ; +#4 = AXIS2_PLACEMENT_3D ( 'NONE', #422, #447, #448 ) ; +#5 = FACE_OUTER_BOUND ( 'NONE', #68, .T. ) ; +#6 = VECTOR ( 'NONE', #437, 1000.000000000000000 ) ; +#7 = AXIS2_PLACEMENT_3D ( 'NONE', #348, #349, #350 ) ; +#8 = FACE_OUTER_BOUND ( 'NONE', #90, .T. ) ; +#9 = VECTOR ( 'NONE', #434, 1000.000000000000000 ) ; +#10 = CLOSED_SHELL ( 'NONE', ( #592, #603, #604, #591, #639, #637, #638, #607, #713, #605, #692, #693, #694, #589, #714, #602, #690, #691, #680, #681, #595, #590, #707, #708, #684, #683, #679, #678 ) ) ; +#11 = VECTOR ( 'NONE', #431, 1000.000000000000000 ) ; +#12 = FACE_OUTER_BOUND ( 'NONE', #65, .T. ) ; +#13 = AXIS2_PLACEMENT_3D ( 'NONE', #335, #336, #337 ) ; +#14 = VECTOR ( 'NONE', #347, 1000.000000000000000 ) ; +#15 = VECTOR ( 'NONE', #428, 1000.000000000000000 ) ; +#16 = AXIS2_PLACEMENT_3D ( 'NONE', #332, #333, #334 ) ; +#17 = VECTOR ( 'NONE', #425, 1000.000000000000000 ) ; +#18 = VECTOR ( 'NONE', #419, 1000.000000000000000 ) ; +#19 = AXIS2_PLACEMENT_3D ( 'NONE', #516, #517, #518 ) ; +#20 = VECTOR ( 'NONE', #357, 1000.000000000000000 ) ; +#21 = VECTOR ( 'NONE', #416, 1000.000000000000000 ) ; +#22 = AXIS2_PLACEMENT_3D ( 'NONE', #413, #420, #421 ) ; +#23 = VECTOR ( 'NONE', #410, 1000.000000000000000 ) ; +#24 = AXIS2_PLACEMENT_3D ( 'NONE', #404, #411, #412 ) ; +#25 = VECTOR ( 'NONE', #407, 1000.000000000000000 ) ; +#26 = FACE_OUTER_BOUND ( 'NONE', #66, .T. ) ; +#27 = AXIS2_PLACEMENT_3D ( 'NONE', #398, #399, #400 ) ; +#28 = AXIS2_PLACEMENT_3D ( 'NONE', #401, #402, #403 ) ; +#29 = FACE_BOUND ( 'NONE', #70, .T. ) ; +#30 = AXIS2_PLACEMENT_3D ( 'NONE', #354, #358, #359 ) ; +#31 = CYLINDRICAL_SURFACE ( 'NONE', #32, 5.500000000000000000 ) ; +#32 = AXIS2_PLACEMENT_3D ( 'NONE', #394, #395, #396 ) ; +#33 = FACE_OUTER_BOUND ( 'NONE', #69, .T. ) ; +#34 = CYLINDRICAL_SURFACE ( 'NONE', #40, 5.500000000000000000 ) ; +#35 = FACE_OUTER_BOUND ( 'NONE', #72, .T. ) ; +#36 = CYLINDRICAL_SURFACE ( 'NONE', #43, 2.499999999999998700 ) ; +#37 = VECTOR ( 'NONE', #387, 1000.000000000000000 ) ; +#38 = VECTOR ( 'NONE', #343, 1000.000000000000000 ) ; +#39 = FACE_OUTER_BOUND ( 'NONE', #89, .T. ) ; +#40 = AXIS2_PLACEMENT_3D ( 'NONE', #391, #392, #393 ) ; +#41 = AXIS2_PLACEMENT_3D ( 'NONE', #328, #329, #330 ) ; +#42 = CYLINDRICAL_SURFACE ( 'NONE', #61, 5.500000000000000000 ) ; +#43 = AXIS2_PLACEMENT_3D ( 'NONE', #338, #339, #340 ) ; +#44 = FACE_OUTER_BOUND ( 'NONE', #71, .T. ) ; +#45 = FACE_OUTER_BOUND ( 'NONE', #81, .T. ) ; +#46 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #377, #378 ) ; +#47 = AXIS2_PLACEMENT_3D ( 'NONE', #379, #380, #381 ) ; +#48 = AXIS2_PLACEMENT_3D ( 'NONE', #388, #389, #390 ) ; +#49 = FACE_BOUND ( 'NONE', #76, .T. ) ; +#50 = AXIS2_PLACEMENT_3D ( 'NONE', #372, #373, #374 ) ; +#51 = FACE_OUTER_BOUND ( 'NONE', #75, .T. ) ; +#52 = CYLINDRICAL_SURFACE ( 'NONE', #41, 7.500000000000000000 ) ; +#53 = FACE_OUTER_BOUND ( 'NONE', #73, .T. ) ; +#54 = CYLINDRICAL_SURFACE ( 'NONE', #55, 7.500000000000000000 ) ; +#55 = AXIS2_PLACEMENT_3D ( 'NONE', #369, #370, #371 ) ; +#56 = FACE_OUTER_BOUND ( 'NONE', #67, .T. ) ; +#57 = FACE_OUTER_BOUND ( 'NONE', #84, .T. ) ; +#58 = AXIS2_PLACEMENT_3D ( 'NONE', #351, #352, #353 ) ; +#59 = AXIS2_PLACEMENT_3D ( 'NONE', #360, #367, #368 ) ; +#60 = VECTOR ( 'NONE', #366, 1000.000000000000000 ) ; +#61 = AXIS2_PLACEMENT_3D ( 'NONE', #382, #383, #384 ) ; +#62 = VECTOR ( 'NONE', #363, 1000.000000000000000 ) ; +#63 = CYLINDRICAL_SURFACE ( 'NONE', #59, 2.499999999999998700 ) ; +#64 = ORIENTED_EDGE ( 'NONE', *, *, #599, .F. ) ; +#65 = EDGE_LOOP ( 'NONE', ( #64, #116, #118, #114 ) ) ; +#66 = EDGE_LOOP ( 'NONE', ( #115, #120, #121, #119 ) ) ; +#67 = EDGE_LOOP ( 'NONE', ( #117, #276, #278, #275 ) ) ; +#68 = EDGE_LOOP ( 'NONE', ( #279, #280, #281, #277 ) ) ; +#69 = EDGE_LOOP ( 'NONE', ( #126, #124 ) ) ; +#70 = EDGE_LOOP ( 'NONE', ( #125, #122, #123, #107, #108, #106, #105, #109, #100, #97, #98, #99, #113, #112, #111, #110 ) ) ; +#71 = EDGE_LOOP ( 'NONE', ( #228, #226, #227, #104 ) ) ; +#72 = EDGE_LOOP ( 'NONE', ( #103, #101, #102, #127 ) ) ; +#73 = EDGE_LOOP ( 'NONE', ( #128, #130, #129, #131 ) ) ; +#74 = EDGE_LOOP ( 'NONE', ( #132, #134, #133, #135 ) ) ; +#75 = EDGE_LOOP ( 'NONE', ( #137, #138 ) ) ; +#76 = EDGE_LOOP ( 'NONE', ( #139, #141 ) ) ; +#77 = EDGE_LOOP ( 'NONE', ( #136, #142, #140, #144 ) ) ; +#78 = EDGE_LOOP ( 'NONE', ( #145, #146, #143, #148 ) ) ; +#79 = EDGE_LOOP ( 'NONE', ( #149, #151 ) ) ; +#80 = EDGE_LOOP ( 'NONE', ( #147, #152 ) ) ; +#81 = EDGE_LOOP ( 'NONE', ( #153, #154, #155, #150 ) ) ; +#82 = EDGE_LOOP ( 'NONE', ( #157, #158, #156, #159, #160, #161, #163, #162, #164, #165, #167, #166, #168, #169, #171, #170 ) ) ; +#83 = EDGE_LOOP ( 'NONE', ( #173, #175 ) ) ; +#84 = EDGE_LOOP ( 'NONE', ( #172, #176, #177, #174 ) ) ; +#85 = EDGE_LOOP ( 'NONE', ( #179, #180, #178, #182 ) ) ; +#86 = EDGE_LOOP ( 'NONE', ( #183, #184, #181, #186 ) ) ; +#87 = EDGE_LOOP ( 'NONE', ( #187, #188, #189, #185 ) ) ; +#88 = EDGE_LOOP ( 'NONE', ( #191, #192, #190, #194 ) ) ; +#89 = EDGE_LOOP ( 'NONE', ( #195, #196, #193, #198 ) ) ; +#90 = EDGE_LOOP ( 'NONE', ( #199, #200, #201, #197 ) ) ; +#91 = EDGE_LOOP ( 'NONE', ( #203, #204, #202, #206 ) ) ; +#92 = EDGE_LOOP ( 'NONE', ( #207, #208, #205, #210 ) ) ; +#93 = EDGE_LOOP ( 'NONE', ( #211, #212, #213, #209 ) ) ; +#94 = EDGE_LOOP ( 'NONE', ( #215, #216, #214, #218 ) ) ; +#95 = EDGE_LOOP ( 'NONE', ( #219, #220, #217, #222 ) ) ; +#96 = EDGE_LOOP ( 'NONE', ( #223, #224, #225, #221 ) ) ; +#97 = ORIENTED_EDGE ( 'NONE', *, *, #601, .F. ) ; +#98 = ORIENTED_EDGE ( 'NONE', *, *, #597, .T. ) ; +#99 = ORIENTED_EDGE ( 'NONE', *, *, #702, .F. ) ; +#100 = ORIENTED_EDGE ( 'NONE', *, *, #608, .F. ) ; +#101 = ORIENTED_EDGE ( 'NONE', *, *, #598, .T. ) ; +#102 = ORIENTED_EDGE ( 'NONE', *, *, #705, .F. ) ; +#103 = ORIENTED_EDGE ( 'NONE', *, *, #606, .T. ) ; +#104 = ORIENTED_EDGE ( 'NONE', *, *, #593, .T. ) ; +#105 = ORIENTED_EDGE ( 'NONE', *, *, #609, .T. ) ; +#106 = ORIENTED_EDGE ( 'NONE', *, *, #709, .F. ) ; +#107 = ORIENTED_EDGE ( 'NONE', *, *, #712, .F. ) ; +#108 = ORIENTED_EDGE ( 'NONE', *, *, #710, .F. ) ; +#109 = ORIENTED_EDGE ( 'NONE', *, *, #600, .F. ) ; +#110 = ORIENTED_EDGE ( 'NONE', *, *, #644, .F. ) ; +#111 = ORIENTED_EDGE ( 'NONE', *, *, #705, .T. ) ; +#112 = ORIENTED_EDGE ( 'NONE', *, *, #704, .F. ) ; +#113 = ORIENTED_EDGE ( 'NONE', *, *, #703, .F. ) ; +#114 = ORIENTED_EDGE ( 'NONE', *, *, #700, .F. ) ; +#115 = ORIENTED_EDGE ( 'NONE', *, *, #695, .F. ) ; +#116 = ORIENTED_EDGE ( 'NONE', *, *, #594, .T. ) ; +#117 = ORIENTED_EDGE ( 'NONE', *, *, #643, .T. ) ; +#118 = ORIENTED_EDGE ( 'NONE', *, *, #698, .T. ) ; +#119 = ORIENTED_EDGE ( 'NONE', *, *, #699, .F. ) ; +#120 = ORIENTED_EDGE ( 'NONE', *, *, #696, .T. ) ; +#121 = ORIENTED_EDGE ( 'NONE', *, *, #697, .T. ) ; +#122 = ORIENTED_EDGE ( 'NONE', *, *, #687, .F. ) ; +#123 = ORIENTED_EDGE ( 'NONE', *, *, #711, .T. ) ; +#124 = ORIENTED_EDGE ( 'NONE', *, *, #697, .F. ) ; +#125 = ORIENTED_EDGE ( 'NONE', *, *, #689, .F. ) ; +#126 = ORIENTED_EDGE ( 'NONE', *, *, #686, .F. ) ; +#127 = ORIENTED_EDGE ( 'NONE', *, *, #682, .T. ) ; +#128 = ORIENTED_EDGE ( 'NONE', *, *, #677, .T. ) ; +#129 = ORIENTED_EDGE ( 'NONE', *, *, #597, .F. ) ; +#130 = ORIENTED_EDGE ( 'NONE', *, *, #706, .T. ) ; +#131 = ORIENTED_EDGE ( 'NONE', *, *, #676, .T. ) ; +#132 = ORIENTED_EDGE ( 'NONE', *, *, #674, .T. ) ; +#133 = ORIENTED_EDGE ( 'NONE', *, *, #609, .F. ) ; +#134 = ORIENTED_EDGE ( 'NONE', *, *, #675, .T. ) ; +#135 = ORIENTED_EDGE ( 'NONE', *, *, #673, .T. ) ; +#136 = ORIENTED_EDGE ( 'NONE', *, *, #641, .F. ) ; +#137 = ORIENTED_EDGE ( 'NONE', *, *, #688, .T. ) ; +#138 = ORIENTED_EDGE ( 'NONE', *, *, #672, .T. ) ; +#139 = ORIENTED_EDGE ( 'NONE', *, *, #671, .F. ) ; +#140 = ORIENTED_EDGE ( 'NONE', *, *, #685, .T. ) ; +#141 = ORIENTED_EDGE ( 'NONE', *, *, #698, .F. ) ; +#142 = ORIENTED_EDGE ( 'NONE', *, *, #670, .T. ) ; +#143 = ORIENTED_EDGE ( 'NONE', *, *, #642, .T. ) ; +#144 = ORIENTED_EDGE ( 'NONE', *, *, #672, .F. ) ; +#145 = ORIENTED_EDGE ( 'NONE', *, *, #701, .F. ) ; +#146 = ORIENTED_EDGE ( 'NONE', *, *, #669, .T. ) ; +#147 = ORIENTED_EDGE ( 'NONE', *, *, #643, .F. ) ; +#148 = ORIENTED_EDGE ( 'NONE', *, *, #670, .F. ) ; +#149 = ORIENTED_EDGE ( 'NONE', *, *, #668, .T. ) ; +#150 = ORIENTED_EDGE ( 'NONE', *, *, #686, .T. ) ; +#151 = ORIENTED_EDGE ( 'NONE', *, *, #695, .T. ) ; +#152 = ORIENTED_EDGE ( 'NONE', *, *, #669, .F. ) ; +#153 = ORIENTED_EDGE ( 'NONE', *, *, #696, .F. ) ; +#154 = ORIENTED_EDGE ( 'NONE', *, *, #668, .F. ) ; +#155 = ORIENTED_EDGE ( 'NONE', *, *, #699, .T. ) ; +#156 = ORIENTED_EDGE ( 'NONE', *, *, #666, .T. ) ; +#157 = ORIENTED_EDGE ( 'NONE', *, *, #674, .F. ) ; +#158 = ORIENTED_EDGE ( 'NONE', *, *, #667, .T. ) ; +#159 = ORIENTED_EDGE ( 'NONE', *, *, #665, .T. ) ; +#160 = ORIENTED_EDGE ( 'NONE', *, *, #646, .F. ) ; +#161 = ORIENTED_EDGE ( 'NONE', *, *, #664, .T. ) ; +#162 = ORIENTED_EDGE ( 'NONE', *, *, #662, .T. ) ; +#163 = ORIENTED_EDGE ( 'NONE', *, *, #663, .T. ) ; +#164 = ORIENTED_EDGE ( 'NONE', *, *, #606, .F. ) ; +#165 = ORIENTED_EDGE ( 'NONE', *, *, #661, .T. ) ; +#166 = ORIENTED_EDGE ( 'NONE', *, *, #659, .T. ) ; +#167 = ORIENTED_EDGE ( 'NONE', *, *, #660, .T. ) ; +#168 = ORIENTED_EDGE ( 'NONE', *, *, #677, .F. ) ; +#169 = ORIENTED_EDGE ( 'NONE', *, *, #658, .T. ) ; +#170 = ORIENTED_EDGE ( 'NONE', *, *, #656, .T. ) ; +#171 = ORIENTED_EDGE ( 'NONE', *, *, #657, .T. ) ; +#172 = ORIENTED_EDGE ( 'NONE', *, *, #594, .F. ) ; +#173 = ORIENTED_EDGE ( 'NONE', *, *, #655, .T. ) ; +#174 = ORIENTED_EDGE ( 'NONE', *, *, #671, .T. ) ; +#175 = ORIENTED_EDGE ( 'NONE', *, *, #599, .T. ) ; +#176 = ORIENTED_EDGE ( 'NONE', *, *, #655, .F. ) ; +#177 = ORIENTED_EDGE ( 'NONE', *, *, #700, .T. ) ; +#178 = ORIENTED_EDGE ( 'NONE', *, *, #667, .F. ) ; +#179 = ORIENTED_EDGE ( 'NONE', *, *, #709, .T. ) ; +#180 = ORIENTED_EDGE ( 'NONE', *, *, #654, .T. ) ; +#181 = ORIENTED_EDGE ( 'NONE', *, *, #712, .T. ) ; +#182 = ORIENTED_EDGE ( 'NONE', *, *, #673, .F. ) ; +#183 = ORIENTED_EDGE ( 'NONE', *, *, #665, .F. ) ; +#184 = ORIENTED_EDGE ( 'NONE', *, *, #653, .F. ) ; +#185 = ORIENTED_EDGE ( 'NONE', *, *, #654, .F. ) ; +#186 = ORIENTED_EDGE ( 'NONE', *, *, #645, .F. ) ; +#187 = ORIENTED_EDGE ( 'NONE', *, *, #710, .T. ) ; +#188 = ORIENTED_EDGE ( 'NONE', *, *, #653, .T. ) ; +#189 = ORIENTED_EDGE ( 'NONE', *, *, #666, .F. ) ; +#190 = ORIENTED_EDGE ( 'NONE', *, *, #644, .T. ) ; +#191 = ORIENTED_EDGE ( 'NONE', *, *, #662, .F. ) ; +#192 = ORIENTED_EDGE ( 'NONE', *, *, #652, .F. ) ; +#193 = ORIENTED_EDGE ( 'NONE', *, *, #664, .F. ) ; +#194 = ORIENTED_EDGE ( 'NONE', *, *, #598, .F. ) ; +#195 = ORIENTED_EDGE ( 'NONE', *, *, #687, .T. ) ; +#196 = ORIENTED_EDGE ( 'NONE', *, *, #651, .T. ) ; +#197 = ORIENTED_EDGE ( 'NONE', *, *, #651, .F. ) ; +#198 = ORIENTED_EDGE ( 'NONE', *, *, #593, .F. ) ; +#199 = ORIENTED_EDGE ( 'NONE', *, *, #689, .T. ) ; +#200 = ORIENTED_EDGE ( 'NONE', *, *, #652, .T. ) ; +#201 = ORIENTED_EDGE ( 'NONE', *, *, #663, .F. ) ; +#202 = ORIENTED_EDGE ( 'NONE', *, *, #702, .T. ) ; +#203 = ORIENTED_EDGE ( 'NONE', *, *, #659, .F. ) ; +#204 = ORIENTED_EDGE ( 'NONE', *, *, #650, .F. ) ; +#205 = ORIENTED_EDGE ( 'NONE', *, *, #661, .F. ) ; +#206 = ORIENTED_EDGE ( 'NONE', *, *, #706, .F. ) ; +#207 = ORIENTED_EDGE ( 'NONE', *, *, #704, .T. ) ; +#208 = ORIENTED_EDGE ( 'NONE', *, *, #649, .T. ) ; +#209 = ORIENTED_EDGE ( 'NONE', *, *, #649, .F. ) ; +#210 = ORIENTED_EDGE ( 'NONE', *, *, #682, .F. ) ; +#211 = ORIENTED_EDGE ( 'NONE', *, *, #703, .T. ) ; +#212 = ORIENTED_EDGE ( 'NONE', *, *, #650, .T. ) ; +#213 = ORIENTED_EDGE ( 'NONE', *, *, #660, .F. ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #658, .F. ) ; +#215 = ORIENTED_EDGE ( 'NONE', *, *, #601, .T. ) ; +#216 = ORIENTED_EDGE ( 'NONE', *, *, #648, .T. ) ; +#217 = ORIENTED_EDGE ( 'NONE', *, *, #657, .F. ) ; +#218 = ORIENTED_EDGE ( 'NONE', *, *, #676, .F. ) ; +#219 = ORIENTED_EDGE ( 'NONE', *, *, #608, .T. ) ; +#220 = ORIENTED_EDGE ( 'NONE', *, *, #647, .T. ) ; +#221 = ORIENTED_EDGE ( 'NONE', *, *, #675, .F. ) ; +#222 = ORIENTED_EDGE ( 'NONE', *, *, #648, .F. ) ; +#223 = ORIENTED_EDGE ( 'NONE', *, *, #656, .F. ) ; +#224 = ORIENTED_EDGE ( 'NONE', *, *, #647, .F. ) ; +#225 = ORIENTED_EDGE ( 'NONE', *, *, #600, .T. ) ; +#226 = ORIENTED_EDGE ( 'NONE', *, *, #645, .T. ) ; +#227 = ORIENTED_EDGE ( 'NONE', *, *, #711, .F. ) ; +#228 = ORIENTED_EDGE ( 'NONE', *, *, #646, .T. ) ; +#229 = VERTEX_POINT ( 'NONE', #282 ) ; +#230 = VERTEX_POINT ( 'NONE', #283 ) ; +#231 = VERTEX_POINT ( 'NONE', #284 ) ; +#232 = VERTEX_POINT ( 'NONE', #285 ) ; +#233 = VERTEX_POINT ( 'NONE', #286 ) ; +#234 = VERTEX_POINT ( 'NONE', #287 ) ; +#235 = VERTEX_POINT ( 'NONE', #288 ) ; +#236 = VERTEX_POINT ( 'NONE', #289 ) ; +#237 = VERTEX_POINT ( 'NONE', #290 ) ; +#238 = VERTEX_POINT ( 'NONE', #291 ) ; +#239 = VERTEX_POINT ( 'NONE', #292 ) ; +#240 = VERTEX_POINT ( 'NONE', #293 ) ; +#241 = VERTEX_POINT ( 'NONE', #294 ) ; +#242 = VERTEX_POINT ( 'NONE', #295 ) ; +#243 = VERTEX_POINT ( 'NONE', #296 ) ; +#244 = VERTEX_POINT ( 'NONE', #297 ) ; +#245 = VERTEX_POINT ( 'NONE', #298 ) ; +#246 = VERTEX_POINT ( 'NONE', #299 ) ; +#247 = VERTEX_POINT ( 'NONE', #300 ) ; +#248 = VERTEX_POINT ( 'NONE', #301 ) ; +#249 = VERTEX_POINT ( 'NONE', #302 ) ; +#250 = VERTEX_POINT ( 'NONE', #303 ) ; +#251 = VERTEX_POINT ( 'NONE', #304 ) ; +#252 = VERTEX_POINT ( 'NONE', #305 ) ; +#253 = VERTEX_POINT ( 'NONE', #306 ) ; +#254 = VERTEX_POINT ( 'NONE', #307 ) ; +#255 = VERTEX_POINT ( 'NONE', #308 ) ; +#256 = VERTEX_POINT ( 'NONE', #309 ) ; +#257 = VERTEX_POINT ( 'NONE', #310 ) ; +#258 = VERTEX_POINT ( 'NONE', #311 ) ; +#259 = VERTEX_POINT ( 'NONE', #312 ) ; +#260 = VERTEX_POINT ( 'NONE', #313 ) ; +#261 = VERTEX_POINT ( 'NONE', #314 ) ; +#262 = VERTEX_POINT ( 'NONE', #315 ) ; +#263 = VERTEX_POINT ( 'NONE', #316 ) ; +#264 = VERTEX_POINT ( 'NONE', #317 ) ; +#265 = VERTEX_POINT ( 'NONE', #318 ) ; +#266 = VERTEX_POINT ( 'NONE', #319 ) ; +#267 = VERTEX_POINT ( 'NONE', #320 ) ; +#268 = VERTEX_POINT ( 'NONE', #321 ) ; +#269 = VERTEX_POINT ( 'NONE', #322 ) ; +#270 = VERTEX_POINT ( 'NONE', #323 ) ; +#271 = VERTEX_POINT ( 'NONE', #324 ) ; +#272 = VERTEX_POINT ( 'NONE', #325 ) ; +#273 = VERTEX_POINT ( 'NONE', #326 ) ; +#274 = VERTEX_POINT ( 'NONE', #327 ) ; +#275 = ORIENTED_EDGE ( 'NONE', *, *, #642, .F. ) ; +#276 = ORIENTED_EDGE ( 'NONE', *, *, #701, .T. ) ; +#277 = ORIENTED_EDGE ( 'NONE', *, *, #685, .F. ) ; +#278 = ORIENTED_EDGE ( 'NONE', *, *, #640, .F. ) ; +#279 = ORIENTED_EDGE ( 'NONE', *, *, #640, .T. ) ; +#280 = ORIENTED_EDGE ( 'NONE', *, *, #641, .T. ) ; +#281 = ORIENTED_EDGE ( 'NONE', *, *, #688, .F. ) ; +#282 = CARTESIAN_POINT ( 'NONE', ( 5.408326913195987000, 76.51434852559523800, 0.9999999999998898700 ) ) ; +#283 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000006000, 5.514348525595180700, -5.408326913196072300 ) ) ; +#284 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5143485255952040500, -33.00000000000000000 ) ) ; +#285 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 81.51434852559525300, -9.500000000000000000 ) ) ; +#286 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999922300, 5.514348525595180700, -7.000000000000200700 ) ) ; +#287 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 5.514348525595180700, -5.408326913196093600 ) ) ; +#288 = CARTESIAN_POINT ( 'NONE', ( 5.408326913195987000, 5.514348525595180700, -1.000000000000021800 ) ) ; +#289 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000009500, 5.514348525595180700, 5.408326913195871600 ) ) ; +#290 = CARTESIAN_POINT ( 'NONE', ( -5.408326913196006600, 5.514348525595180700, 0.9999999999999107400 ) ) ; +#291 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000013100, 5.514348525595180700, 5.408326913195892000 ) ) ; +#292 = CARTESIAN_POINT ( 'NONE', ( 4.041334437186266200E-015, 5.514348525595180700, 33.00000000000000000 ) ) ; +#293 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000013100, 76.51434852559523800, 5.408326913195892000 ) ) ; +#294 = CARTESIAN_POINT ( 'NONE', ( 5.408326913195987000, 76.51434852559523800, -1.000000000000021800 ) ) ; +#295 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999922300, 76.51434852559523800, -7.000000000000200700 ) ) ; +#296 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000011500, 5.514348525595180700, 0.9999999999999037400 ) ) ; +#297 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000000900, 5.514348525595180700, -1.000000000000111900 ) ) ; +#298 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000006000, 76.51434852559523800, -5.408326913196072300 ) ) ; +#299 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, -33.00000000000000000 ) ) ; +#300 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999940000, 5.514348525595180700, 6.999999999999999100 ) ) ; +#301 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000009500, 5.514348525595180700, 6.999999999999804600 ) ) ; +#302 = CARTESIAN_POINT ( 'NONE', ( 5.408326913195987000, 5.514348525595180700, 0.9999999999998898700 ) ) ; +#303 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000900, 5.514348525595180700, -6.999999999999999100 ) ) ; +#304 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 5.514348525595180700, -1.000000000000105000 ) ) ; +#305 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 5.514348525595180700, 0.9999999999999107400 ) ) ; +#306 = CARTESIAN_POINT ( 'NONE', ( 4.041334437186266200E-015, 0.5143485255952040500, 33.00000000000000000 ) ) ; +#307 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 76.51434852559523800, 0.9999999999999107400 ) ) ; +#308 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 81.51434852559525300, -7.500000000000000000 ) ) ; +#309 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999940000, 76.51434852559523800, 6.999999999999999100 ) ) ; +#310 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 76.51434852559523800, -1.000000000000105000 ) ) ; +#311 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000009500, 76.51434852559523800, 5.408326913195871600 ) ) ; +#312 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605147900E-016, 81.51434852559525300, 7.500000000000000000 ) ) ; +#313 = CARTESIAN_POINT ( 'NONE', ( -5.408326913196003000, 5.514348525595180700, -1.000000000000091000 ) ) ; +#314 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000900, 76.51434852559523800, -6.999999999999999100 ) ) ; +#315 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000011500, 76.51434852559523800, 0.9999999999999037400 ) ) ; +#316 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000009500, 76.51434852559523800, 6.999999999999804600 ) ) ; +#317 = CARTESIAN_POINT ( 'NONE', ( -5.408326913196006600, 76.51434852559523800, 0.9999999999999107400 ) ) ; +#318 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868381700E-016, 0.5143485255952040500, 2.499999999999998700 ) ) ; +#319 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 76.51434852559523800, -7.500000000000000000 ) ) ; +#320 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000000900, 76.51434852559523800, -1.000000000000111900 ) ) ; +#321 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 76.51434852559523800, -5.408326913196093600 ) ) ; +#322 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, -2.499999999999998700 ) ) ; +#323 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605147900E-016, 76.51434852559523800, 7.500000000000000000 ) ) ; +#324 = CARTESIAN_POINT ( 'NONE', ( 2.602374448188125100E-015, 81.51434852559525300, 9.500000000000000000 ) ) ; +#325 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5143485255952040500, -2.499999999999998700 ) ) ; +#326 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868381700E-016, 5.514348525595180700, 2.499999999999998700 ) ) ; +#327 = CARTESIAN_POINT ( 'NONE', ( -5.408326913196003000, 76.51434852559523800, -1.000000000000091000 ) ) ; +#328 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#329 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#330 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#331 = PLANE ( 'NONE', #16 ) ; +#332 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 96.31333839881850200, 0.9999999999999107400 ) ) ; +#333 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#334 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#335 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#336 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#337 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#338 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#339 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#340 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#341 = LINE ( 'NONE', #342, #38 ) ; +#342 = CARTESIAN_POINT ( 'NONE', ( -5.408326913196003000, 0.0000000000000000000, -1.000000000000091000 ) ) ; +#343 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#344 = PLANE ( 'NONE', #7 ) ; +#345 = LINE ( 'NONE', #346, #14 ) ; +#346 = CARTESIAN_POINT ( 'NONE', ( 3.061616997868381700E-016, 0.0000000000000000000, 2.499999999999998700 ) ) ; +#347 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#348 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 96.31333839881850200, -1.000000000000105000 ) ) ; +#349 = DIRECTION ( 'NONE', ( 2.498001805406602200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#350 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -2.498001805406602200E-016 ) ) ; +#351 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ; +#352 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#353 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#354 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#355 = LINE ( 'NONE', #356, #20 ) ; +#356 = CARTESIAN_POINT ( 'NONE', ( -5.408326913196006600, 0.0000000000000000000, 0.9999999999999107400 ) ) ; +#357 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#358 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#359 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#360 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#361 = LINE ( 'NONE', #362, #62 ) ; +#362 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000006000, 76.51434852559523800, -1.000000000000111900 ) ) ; +#363 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -3.469446951953614200E-017 ) ) ; +#364 = LINE ( 'NONE', #365, #60 ) ; +#365 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000011500, 76.51434852559523800, 0.9999999999999037400 ) ) ; +#366 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.804112415015879400E-016 ) ) ; +#367 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#368 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#369 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#370 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#371 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#372 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#373 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#374 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#375 = PLANE ( 'NONE', #46 ) ; +#376 = CARTESIAN_POINT ( 'NONE', ( 2.500000000000004000, 0.5143485255952040500, -9.020562075079396900E-014 ) ) ; +#377 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#378 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#379 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#380 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#381 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#382 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#383 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#384 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#385 = LINE ( 'NONE', #386, #37 ) ; +#386 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000000900, 76.51434852559523800, -1.000000000000111900 ) ) ; +#387 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#388 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ; +#389 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#390 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#391 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#392 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#393 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#394 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#395 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#396 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#397 = PLANE ( 'NONE', #27 ) ; +#398 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999978700, 76.51434852559523800, -1.110223024625156500E-013 ) ) ; +#399 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#400 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#401 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#402 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#403 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#404 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 81.51434852559525300, 0.0000000000000000000 ) ) ; +#405 = LINE ( 'NONE', #406, #25 ) ; +#406 = CARTESIAN_POINT ( 'NONE', ( 4.041334437186266200E-015, 0.0000000000000000000, 33.00000000000000000 ) ) ; +#407 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#408 = LINE ( 'NONE', #409, #23 ) ; +#409 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, -33.00000000000000000 ) ) ; +#410 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.9553703930927846000, -0.2954105820747426300 ) ) ; +#411 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#412 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#413 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#414 = LINE ( 'NONE', #415, #21 ) ; +#415 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999991100, 76.51434852559523800, 0.9999999999999107400 ) ) ; +#416 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -6.938893903907228400E-017 ) ) ; +#417 = LINE ( 'NONE', #418, #18 ) ; +#418 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000006000, 0.0000000000000000000, -5.408326913196072300 ) ) ; +#419 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#420 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#421 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#422 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#423 = LINE ( 'NONE', #424, #17 ) ; +#424 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000000900, 96.31333839881850200, -1.000000000000111900 ) ) ; +#425 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#426 = LINE ( 'NONE', #427, #15 ) ; +#427 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000011500, 96.31333839881850200, 0.9999999999999037400 ) ) ; +#428 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#429 = LINE ( 'NONE', #430, #11 ) ; +#430 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999940000, 96.31333839881850200, 6.999999999999999100 ) ) ; +#431 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#432 = LINE ( 'NONE', #433, #9 ) ; +#433 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000009500, 96.31333839881850200, 6.999999999999804600 ) ) ; +#434 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#435 = LINE ( 'NONE', #436, #6 ) ; +#436 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 96.31333839881850200, -1.000000000000105000 ) ) ; +#437 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#438 = LINE ( 'NONE', #439, #3 ) ; +#439 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 96.31333839881850200, 0.9999999999999107400 ) ) ; +#440 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#441 = LINE ( 'NONE', #442, #1 ) ; +#442 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000000900, 96.31333839881850200, -6.999999999999999100 ) ) ; +#443 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#444 = LINE ( 'NONE', #445, #725 ) ; +#445 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999922300, 96.31333839881850200, -7.000000000000200700 ) ) ; +#446 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#447 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#448 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#449 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 81.51434852559525300, 0.0000000000000000000 ) ) ; +#450 = LINE ( 'NONE', #451, #790 ) ; +#451 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000006000, 5.514348525595180700, -1.000000000000111900 ) ) ; +#452 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, -3.469446951953614200E-017 ) ) ; +#453 = LINE ( 'NONE', #454, #791 ) ; +#454 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000000900, 5.514348525595180700, -1.000000000000111900 ) ) ; +#455 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#456 = LINE ( 'NONE', #457, #769 ) ; +#457 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000011500, 5.514348525595180700, 0.9999999999999037400 ) ) ; +#458 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.804112415015879400E-016 ) ) ; +#459 = LINE ( 'NONE', #460, #735 ) ; +#460 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 5.514348525595180700, 0.9999999999998898700 ) ) ; +#461 = DIRECTION ( 'NONE', ( -3.469446951953614200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#462 = LINE ( 'NONE', #463, #728 ) ; +#463 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000009500, 5.514348525595180700, 6.999999999999804600 ) ) ; +#464 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#465 = LINE ( 'NONE', #466, #795 ) ; +#466 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999940000, 5.514348525595180700, 6.999999999999999100 ) ) ; +#467 = DIRECTION ( 'NONE', ( 2.498001805406602200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#468 = LINE ( 'NONE', #469, #770 ) ; +#469 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999991100, 5.514348525595180700, 0.9999999999999107400 ) ) ; +#470 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -6.938893903907228400E-017 ) ) ; +#471 = LINE ( 'NONE', #472, #732 ) ; +#472 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 5.514348525595180700, 0.9999999999999107400 ) ) ; +#473 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#474 = LINE ( 'NONE', #475, #793 ) ; +#475 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 5.514348525595180700, -1.000000000000105000 ) ) ; +#476 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 2.498001805406602200E-016 ) ) ; +#477 = LINE ( 'NONE', #478, #764 ) ; +#478 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000013100, 5.514348525595180700, -1.000000000000091000 ) ) ; +#479 = DIRECTION ( 'NONE', ( 1.457167719820518000E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#480 = LINE ( 'NONE', #481, #780 ) ; +#481 = CARTESIAN_POINT ( 'NONE', ( 1.023486850826316200E-013, 5.514348525595180700, -6.999999999999999100 ) ) ; +#482 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#483 = LINE ( 'NONE', #484, #754 ) ; +#484 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999922300, 5.514348525595180700, -7.000000000000200700 ) ) ; +#485 = DIRECTION ( 'NONE', ( -1.110223024625156500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#486 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#487 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#488 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 81.51434852559525300, 0.0000000000000000000 ) ) ; +#489 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#490 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#491 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#492 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#493 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#494 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5143485255952040500, 0.0000000000000000000 ) ) ; +#495 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#496 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#497 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5143485255952040500, 0.0000000000000000000 ) ) ; +#498 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#499 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#500 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#501 = LINE ( 'NONE', #502, #796 ) ; +#502 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 0.0000000000000000000, -5.408326913196093600 ) ) ; +#503 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#504 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#505 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#506 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#507 = LINE ( 'NONE', #508, #763 ) ; +#508 = CARTESIAN_POINT ( 'NONE', ( 5.408326913195987000, 0.0000000000000000000, -1.000000000000021800 ) ) ; +#509 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#510 = LINE ( 'NONE', #511, #726 ) ; +#511 = CARTESIAN_POINT ( 'NONE', ( 5.408326913195987000, 0.0000000000000000000, 0.9999999999998898700 ) ) ; +#512 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#513 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#514 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#515 = PLANE ( 'NONE', #19 ) ; +#516 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000006000, 96.31333839881850200, -1.000000000000111900 ) ) ; +#517 = DIRECTION ( 'NONE', ( -3.469446951953614200E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#518 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 3.469446951953614200E-017 ) ) ; +#519 = PLANE ( 'NONE', #789 ) ; +#520 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000000900, 96.31333839881850200, -1.000000000000111900 ) ) ; +#521 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#522 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#523 = PLANE ( 'NONE', #786 ) ; +#524 = CARTESIAN_POINT ( 'NONE', ( 1.023486850826316200E-013, 96.31333839881850200, -6.999999999999999100 ) ) ; +#525 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#526 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#527 = PLANE ( 'NONE', #782 ) ; +#528 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999991100, 96.31333839881850200, 0.9999999999999107400 ) ) ; +#529 = DIRECTION ( 'NONE', ( -6.938893903907228400E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#530 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 6.938893903907228400E-017 ) ) ; +#531 = LINE ( 'NONE', #532, #778 ) ; +#532 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000013100, 0.0000000000000000000, 5.408326913195892000 ) ) ; +#533 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#534 = PLANE ( 'NONE', #774 ) ; +#535 = CARTESIAN_POINT ( 'NONE', ( 7.000000000000011500, 96.31333839881850200, 0.9999999999999037400 ) ) ; +#536 = DIRECTION ( 'NONE', ( -1.804112415015879400E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#537 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.804112415015879400E-016 ) ) ; +#538 = PLANE ( 'NONE', #773 ) ; +#539 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000009500, 96.31333839881850200, 6.999999999999804600 ) ) ; +#540 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#541 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#542 = LINE ( 'NONE', #543, #768 ) ; +#543 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -33.00000000000000000 ) ) ; +#544 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#545 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ; +#546 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#547 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#548 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5143485255952040500, 0.0000000000000000000 ) ) ; +#549 = LINE ( 'NONE', #550, #762 ) ; +#550 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 76.51434852559523800, -1.000000000000105000 ) ) ; +#551 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 2.498001805406602200E-016 ) ) ; +#552 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#553 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#554 = PLANE ( 'NONE', #756 ) ; +#555 = LINE ( 'NONE', #556, #757 ) ; +#556 = CARTESIAN_POINT ( 'NONE', ( -7.000000000000022200, 76.51434852559523800, 0.9999999999999107400 ) ) ; +#557 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#558 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999922300, 96.31333839881850200, -7.000000000000200700 ) ) ; +#559 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.110223024625156500E-016 ) ) ; +#560 = DIRECTION ( 'NONE', ( 1.110223024625156500E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#561 = PLANE ( 'NONE', #750 ) ; +#562 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000013100, 96.31333839881850200, -1.000000000000091000 ) ) ; +#563 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.457167719820518000E-016 ) ) ; +#564 = DIRECTION ( 'NONE', ( -1.457167719820518000E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#565 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#566 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#567 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#568 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.514348525595180700, 0.0000000000000000000 ) ) ; +#569 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#570 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#571 = PLANE ( 'NONE', #740 ) ; +#572 = CARTESIAN_POINT ( 'NONE', ( 9.499999999999996400, 81.51434852559525300, 0.0000000000000000000 ) ) ; +#573 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#574 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#575 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 81.51434852559525300, 0.0000000000000000000 ) ) ; +#576 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#577 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#578 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ; +#579 = LINE ( 'NONE', #580, #738 ) ; +#580 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605147900E-016, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#581 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#582 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#583 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#584 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #857, 'distance_accuracy_value', 'NONE'); +#585 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #860, 'distance_accuracy_value', 'NONE'); +#586 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #870, 'distance_accuracy_value', 'NONE'); +#587 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'fuse', ( #888, #883 ), #760 ) ; +#588 = PRODUCT ( 'fuse', 'fuse', '', ( #877 ) ) ; +#589 = ADVANCED_FACE ( 'NONE', ( #45 ), #52, .F. ) ; +#590 = ADVANCED_FACE ( 'NONE', ( #8 ), #331, .T. ) ; +#591 = ADVANCED_FACE ( 'NONE', ( #5 ), #2, .T. ) ; +#592 = ADVANCED_FACE ( 'NONE', ( #12 ), #36, .F. ) ; +#593 = EDGE_CURVE ( 'NONE', #274, #260, #341, .T. ) ; +#594 = EDGE_CURVE ( 'NONE', #273, #265, #345, .T. ) ; +#595 = ADVANCED_FACE ( 'NONE', ( #39 ), #344, .T. ) ; +#596 = CIRCLE ( 'NONE', #58, 5.500000000000000000 ) ; +#597 = EDGE_CURVE ( 'NONE', #229, #258, #596, .T. ) ; +#598 = EDGE_CURVE ( 'NONE', #237, #264, #355, .T. ) ; +#599 = EDGE_CURVE ( 'NONE', #273, #269, #635, .T. ) ; +#600 = EDGE_CURVE ( 'NONE', #267, #241, #361, .T. ) ; +#601 = EDGE_CURVE ( 'NONE', #229, #262, #364, .T. ) ; +#602 = ADVANCED_FACE ( 'NONE', ( #57 ), #63, .F. ) ; +#603 = ADVANCED_FACE ( 'NONE', ( #26 ), #54, .F. ) ; +#604 = ADVANCED_FACE ( 'NONE', ( #56 ), #634, .T. ) ; +#605 = ADVANCED_FACE ( 'NONE', ( #51, #49 ), #375, .T. ) ; +#606 = EDGE_CURVE ( 'NONE', #238, #237, #636, .T. ) ; +#607 = ADVANCED_FACE ( 'NONE', ( #53 ), #42, .F. ) ; +#608 = EDGE_CURVE ( 'NONE', #262, #267, #385, .T. ) ; +#609 = EDGE_CURVE ( 'NONE', #268, #241, #632, .T. ) ; +#610 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #588 ) ) ; +#611 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #879, #889 ) ; +#612 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#613 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#614 = CIRCLE ( 'NONE', #719, 5.500000000000000000 ) ; +#615 = CIRCLE ( 'NONE', #727, 5.500000000000000000 ) ; +#616 = CIRCLE ( 'NONE', #781, 2.499999999999998700 ) ; +#617 = CIRCLE ( 'NONE', #741, 7.500000000000000000 ) ; +#618 = CONICAL_SURFACE ( 'NONE', #745, 33.00000000000000000, 0.2998852523246795500 ) ; +#619 = CIRCLE ( 'NONE', #739, 7.500000000000000000 ) ; +#620 = CIRCLE ( 'NONE', #767, 33.00000000000000000 ) ; +#621 = CIRCLE ( 'NONE', #772, 7.500000000000000000 ) ; +#622 = CIRCLE ( 'NONE', #794, 5.500000000000000000 ) ; +#623 = CIRCLE ( 'NONE', #771, 5.500000000000000000 ) ; +#624 = CIRCLE ( 'NONE', #779, 33.00000000000000000 ) ; +#625 = CIRCLE ( 'NONE', #776, 2.499999999999998700 ) ; +#626 = CIRCLE ( 'NONE', #755, 33.00000000000000000 ) ; +#627 = CIRCLE ( 'NONE', #751, 9.500000000000000000 ) ; +#628 = CIRCLE ( 'NONE', #775, 7.500000000000000000 ) ; +#629 = CIRCLE ( 'NONE', #4, 2.499999999999998700 ) ; +#630 = CIRCLE ( 'NONE', #22, 5.500000000000000000 ) ; +#631 = CIRCLE ( 'NONE', #28, 33.00000000000000000 ) ; +#632 = CIRCLE ( 'NONE', #48, 5.500000000000000000 ) ; +#633 = CIRCLE ( 'NONE', #24, 9.500000000000000000 ) ; +#634 = CONICAL_SURFACE ( 'NONE', #50, 33.00000000000000000, 0.2998852523246795500 ) ; +#635 = CIRCLE ( 'NONE', #30, 2.499999999999998700 ) ; +#636 = CIRCLE ( 'NONE', #47, 5.500000000000000000 ) ; +#637 = ADVANCED_FACE ( 'NONE', ( #44 ), #34, .F. ) ; +#638 = ADVANCED_FACE ( 'NONE', ( #35 ), #31, .F. ) ; +#639 = ADVANCED_FACE ( 'NONE', ( #33, #29 ), #397, .T. ) ; +#640 = EDGE_CURVE ( 'NONE', #246, #239, #631, .T. ) ; +#641 = EDGE_CURVE ( 'NONE', #239, #253, #405, .T. ) ; +#642 = EDGE_CURVE ( 'NONE', #232, #246, #408, .T. ) ; +#643 = EDGE_CURVE ( 'NONE', #232, #271, #633, .T. ) ; +#644 = EDGE_CURVE ( 'NONE', #254, #264, #414, .T. ) ; +#645 = EDGE_CURVE ( 'NONE', #230, #245, #417, .T. ) ; +#646 = EDGE_CURVE ( 'NONE', #260, #230, #630, .T. ) ; +#647 = EDGE_CURVE ( 'NONE', #267, #244, #423, .T. ) ; +#648 = EDGE_CURVE ( 'NONE', #262, #243, #426, .T. ) ; +#649 = EDGE_CURVE ( 'NONE', #256, #247, #429, .T. ) ; +#650 = EDGE_CURVE ( 'NONE', #263, #248, #432, .T. ) ; +#651 = EDGE_CURVE ( 'NONE', #257, #251, #435, .T. ) ; +#652 = EDGE_CURVE ( 'NONE', #254, #252, #438, .T. ) ; +#653 = EDGE_CURVE ( 'NONE', #261, #250, #441, .T. ) ; +#654 = EDGE_CURVE ( 'NONE', #242, #233, #444, .T. ) ; +#655 = EDGE_CURVE ( 'NONE', #269, #273, #629, .T. ) ; +#656 = EDGE_CURVE ( 'NONE', #244, #235, #450, .T. ) ; +#657 = EDGE_CURVE ( 'NONE', #243, #244, #453, .T. ) ; +#658 = EDGE_CURVE ( 'NONE', #249, #243, #456, .T. ) ; +#659 = EDGE_CURVE ( 'NONE', #248, #236, #459, .T. ) ; +#660 = EDGE_CURVE ( 'NONE', #247, #248, #462, .T. ) ; +#661 = EDGE_CURVE ( 'NONE', #238, #247, #465, .T. ) ; +#662 = EDGE_CURVE ( 'NONE', #252, #237, #468, .T. ) ; +#663 = EDGE_CURVE ( 'NONE', #251, #252, #471, .T. ) ; +#664 = EDGE_CURVE ( 'NONE', #260, #251, #474, .T. ) ; +#665 = EDGE_CURVE ( 'NONE', #250, #230, #477, .T. ) ; +#666 = EDGE_CURVE ( 'NONE', #233, #250, #480, .T. ) ; +#667 = EDGE_CURVE ( 'NONE', #234, #233, #483, .T. ) ; +#668 = EDGE_CURVE ( 'NONE', #255, #259, #628, .T. ) ; +#669 = EDGE_CURVE ( 'NONE', #271, #232, #627, .T. ) ; +#670 = EDGE_CURVE ( 'NONE', #239, #246, #626, .T. ) ; +#671 = EDGE_CURVE ( 'NONE', #272, #265, #625, .T. ) ; +#672 = EDGE_CURVE ( 'NONE', #253, #231, #624, .T. ) ; +#673 = EDGE_CURVE ( 'NONE', #268, #234, #501, .T. ) ; +#674 = EDGE_CURVE ( 'NONE', #234, #235, #623, .T. ) ; +#675 = EDGE_CURVE ( 'NONE', #235, #241, #507, .T. ) ; +#676 = EDGE_CURVE ( 'NONE', #229, #249, #510, .T. ) ; +#677 = EDGE_CURVE ( 'NONE', #249, #236, #622, .T. ) ; +#678 = ADVANCED_FACE ( 'NONE', ( #777 ), #515, .T. ) ; +#679 = ADVANCED_FACE ( 'NONE', ( #736 ), #519, .T. ) ; +#680 = ADVANCED_FACE ( 'NONE', ( #792 ), #523, .T. ) ; +#681 = ADVANCED_FACE ( 'NONE', ( #785 ), #527, .T. ) ; +#682 = EDGE_CURVE ( 'NONE', #240, #238, #531, .T. ) ; +#683 = ADVANCED_FACE ( 'NONE', ( #784 ), #534, .T. ) ; +#684 = ADVANCED_FACE ( 'NONE', ( #718 ), #538, .T. ) ; +#685 = EDGE_CURVE ( 'NONE', #246, #231, #542, .T. ) ; +#686 = EDGE_CURVE ( 'NONE', #266, #270, #621, .T. ) ; +#687 = EDGE_CURVE ( 'NONE', #274, #257, #549, .T. ) ; +#688 = EDGE_CURVE ( 'NONE', #231, #253, #620, .T. ) ; +#689 = EDGE_CURVE ( 'NONE', #257, #254, #555, .T. ) ; +#690 = ADVANCED_FACE ( 'NONE', ( #788 ), #554, .T. ) ; +#691 = ADVANCED_FACE ( 'NONE', ( #758 ), #561, .T. ) ; +#692 = ADVANCED_FACE ( 'NONE', ( #753 ), #748, .T. ) ; +#693 = ADVANCED_FACE ( 'NONE', ( #749 ), #618, .T. ) ; +#694 = ADVANCED_FACE ( 'NONE', ( #747, #744 ), #571, .T. ) ; +#695 = EDGE_CURVE ( 'NONE', #259, #255, #617, .T. ) ; +#696 = EDGE_CURVE ( 'NONE', #259, #270, #579, .T. ) ; +#697 = EDGE_CURVE ( 'NONE', #270, #266, #619, .T. ) ; +#698 = EDGE_CURVE ( 'NONE', #265, #272, #616, .T. ) ; +#699 = EDGE_CURVE ( 'NONE', #255, #266, #801, .T. ) ; +#700 = EDGE_CURVE ( 'NONE', #269, #272, #804, .T. ) ; +#701 = EDGE_CURVE ( 'NONE', #271, #239, #807, .T. ) ; +#702 = EDGE_CURVE ( 'NONE', #263, #258, #810, .T. ) ; +#703 = EDGE_CURVE ( 'NONE', #256, #263, #813, .T. ) ; +#704 = EDGE_CURVE ( 'NONE', #240, #256, #816, .T. ) ; +#705 = EDGE_CURVE ( 'NONE', #240, #264, #615, .T. ) ; +#706 = EDGE_CURVE ( 'NONE', #236, #258, #822, .T. ) ; +#707 = ADVANCED_FACE ( 'NONE', ( #742 ), #821, .T. ) ; +#708 = ADVANCED_FACE ( 'NONE', ( #787 ), #828, .T. ) ; +#709 = EDGE_CURVE ( 'NONE', #268, #242, #832, .T. ) ; +#710 = EDGE_CURVE ( 'NONE', #242, #261, #836, .T. ) ; +#711 = EDGE_CURVE ( 'NONE', #274, #245, #614, .T. ) ; +#712 = EDGE_CURVE ( 'NONE', #261, #245, #842, .T. ) ; +#713 = ADVANCED_FACE ( 'NONE', ( #717 ), #724, .F. ) ; +#714 = ADVANCED_FACE ( 'NONE', ( #731, #783 ), #847, .T. ) ; +#715 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#716 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#717 = FACE_OUTER_BOUND ( 'NONE', #74, .T. ) ; +#718 = FACE_OUTER_BOUND ( 'NONE', #93, .T. ) ; +#719 = AXIS2_PLACEMENT_3D ( 'NONE', #835, #839, #840 ) ; +#720 = VECTOR ( 'NONE', #815, 1000.000000000000000 ) ; +#721 = AXIS2_PLACEMENT_3D ( 'NONE', #825, #826, #827 ) ; +#722 = AXIS2_PLACEMENT_3D ( 'NONE', #829, #830, #831 ) ; +#723 = VECTOR ( 'NONE', #812, 1000.000000000000000 ) ; +#724 = CYLINDRICAL_SURFACE ( 'NONE', #743, 5.500000000000000000 ) ; +#725 = VECTOR ( 'NONE', #446, 1000.000000000000000 ) ; +#726 = VECTOR ( 'NONE', #512, 1000.000000000000000 ) ; +#727 = AXIS2_PLACEMENT_3D ( 'NONE', #800, #819, #820 ) ; +#728 = VECTOR ( 'NONE', #464, 1000.000000000000000 ) ; +#729 = VECTOR ( 'NONE', #809, 1000.000000000000000 ) ; +#730 = VECTOR ( 'NONE', #806, 1000.000000000000000 ) ; +#731 = FACE_OUTER_BOUND ( 'NONE', #82, .T. ) ; +#732 = VECTOR ( 'NONE', #473, 1000.000000000000000 ) ; +#733 = VECTOR ( 'NONE', #803, 1000.000000000000000 ) ; +#734 = VECTOR ( 'NONE', #834, 1000.000000000000000 ) ; +#735 = VECTOR ( 'NONE', #461, 1000.000000000000000 ) ; +#736 = FACE_OUTER_BOUND ( 'NONE', #95, .T. ) ; +#737 = VECTOR ( 'NONE', #844, 1000.000000000000000 ) ; +#738 = VECTOR ( 'NONE', #581, 1000.000000000000000 ) ; +#739 = AXIS2_PLACEMENT_3D ( 'NONE', #578, #582, #583 ) ; +#740 = AXIS2_PLACEMENT_3D ( 'NONE', #572, #573, #574 ) ; +#741 = AXIS2_PLACEMENT_3D ( 'NONE', #575, #576, #577 ) ; +#742 = FACE_OUTER_BOUND ( 'NONE', #91, .T. ) ; +#743 = AXIS2_PLACEMENT_3D ( 'NONE', #841, #845, #846 ) ; +#744 = FACE_OUTER_BOUND ( 'NONE', #80, .T. ) ; +#745 = AXIS2_PLACEMENT_3D ( 'NONE', #568, #569, #570 ) ; +#746 = VECTOR ( 'NONE', #824, 1000.000000000000000 ) ; +#747 = FACE_BOUND ( 'NONE', #79, .T. ) ; +#748 = CYLINDRICAL_SURFACE ( 'NONE', #766, 33.00000000000000000 ) ; +#749 = FACE_OUTER_BOUND ( 'NONE', #78, .T. ) ; +#750 = AXIS2_PLACEMENT_3D ( 'NONE', #562, #563, #564 ) ; +#751 = AXIS2_PLACEMENT_3D ( 'NONE', #488, #489, #490 ) ; +#752 = VECTOR ( 'NONE', #818, 1000.000000000000000 ) ; +#753 = FACE_OUTER_BOUND ( 'NONE', #77, .T. ) ; +#754 = VECTOR ( 'NONE', #485, 1000.000000000000000 ) ; +#755 = AXIS2_PLACEMENT_3D ( 'NONE', #491, #492, #493 ) ; +#756 = AXIS2_PLACEMENT_3D ( 'NONE', #558, #559, #560 ) ; +#757 = VECTOR ( 'NONE', #557, 1000.000000000000000 ) ; +#758 = FACE_OUTER_BOUND ( 'NONE', #86, .T. ) ; +#759 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #584 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #857, #858, #859 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#760 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #585 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #860, #861, #862 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#761 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #586 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #870, #871, #872 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#762 = VECTOR ( 'NONE', #551, 1000.000000000000000 ) ; +#763 = VECTOR ( 'NONE', #509, 1000.000000000000000 ) ; +#764 = VECTOR ( 'NONE', #479, 1000.000000000000000 ) ; +#765 = VECTOR ( 'NONE', #838, 1000.000000000000000 ) ; +#766 = AXIS2_PLACEMENT_3D ( 'NONE', #565, #566, #567 ) ; +#767 = AXIS2_PLACEMENT_3D ( 'NONE', #548, #552, #553 ) ; +#768 = VECTOR ( 'NONE', #544, 1000.000000000000000 ) ; +#769 = VECTOR ( 'NONE', #458, 1000.000000000000000 ) ; +#770 = VECTOR ( 'NONE', #470, 1000.000000000000000 ) ; +#771 = AXIS2_PLACEMENT_3D ( 'NONE', #500, #504, #505 ) ; +#772 = AXIS2_PLACEMENT_3D ( 'NONE', #545, #546, #547 ) ; +#773 = AXIS2_PLACEMENT_3D ( 'NONE', #539, #540, #541 ) ; +#774 = AXIS2_PLACEMENT_3D ( 'NONE', #535, #536, #537 ) ; +#775 = AXIS2_PLACEMENT_3D ( 'NONE', #449, #486, #487 ) ; +#776 = AXIS2_PLACEMENT_3D ( 'NONE', #494, #495, #496 ) ; +#777 = FACE_OUTER_BOUND ( 'NONE', #96, .T. ) ; +#778 = VECTOR ( 'NONE', #533, 1000.000000000000000 ) ; +#779 = AXIS2_PLACEMENT_3D ( 'NONE', #497, #498, #499 ) ; +#780 = VECTOR ( 'NONE', #482, 1000.000000000000000 ) ; +#781 = AXIS2_PLACEMENT_3D ( 'NONE', #797, #798, #799 ) ; +#782 = AXIS2_PLACEMENT_3D ( 'NONE', #528, #529, #530 ) ; +#783 = FACE_BOUND ( 'NONE', #83, .T. ) ; +#784 = FACE_OUTER_BOUND ( 'NONE', #94, .T. ) ; +#785 = FACE_OUTER_BOUND ( 'NONE', #88, .T. ) ; +#786 = AXIS2_PLACEMENT_3D ( 'NONE', #524, #525, #526 ) ; +#787 = FACE_OUTER_BOUND ( 'NONE', #92, .T. ) ; +#788 = FACE_OUTER_BOUND ( 'NONE', #85, .T. ) ; +#789 = AXIS2_PLACEMENT_3D ( 'NONE', #520, #521, #522 ) ; +#790 = VECTOR ( 'NONE', #452, 1000.000000000000000 ) ; +#791 = VECTOR ( 'NONE', #455, 1000.000000000000000 ) ; +#792 = FACE_OUTER_BOUND ( 'NONE', #87, .T. ) ; +#793 = VECTOR ( 'NONE', #476, 1000.000000000000000 ) ; +#794 = AXIS2_PLACEMENT_3D ( 'NONE', #506, #513, #514 ) ; +#795 = VECTOR ( 'NONE', #467, 1000.000000000000000 ) ; +#796 = VECTOR ( 'NONE', #503, 1000.000000000000000 ) ; +#797 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.5143485255952040500, 0.0000000000000000000 ) ) ; +#798 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#799 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#800 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ; +#801 = LINE ( 'NONE', #802, #733 ) ; +#802 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -7.500000000000000000 ) ) ; +#803 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#804 = LINE ( 'NONE', #805, #730 ) ; +#805 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -2.499999999999998700 ) ) ; +#806 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#807 = LINE ( 'NONE', #808, #729 ) ; +#808 = CARTESIAN_POINT ( 'NONE', ( 4.041334437186266200E-015, 5.514348525595180700, 33.00000000000000000 ) ) ; +#809 = DIRECTION ( 'NONE', ( 3.617736237720900300E-017, -0.9553703930927846000, 0.2954105820747426300 ) ) ; +#810 = LINE ( 'NONE', #811, #723 ) ; +#811 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 76.51434852559523800, 0.9999999999998898700 ) ) ; +#812 = DIRECTION ( 'NONE', ( -3.469446951953614200E-017, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#813 = LINE ( 'NONE', #814, #720 ) ; +#814 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000009500, 76.51434852559523800, 6.999999999999804600 ) ) ; +#815 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#816 = LINE ( 'NONE', #817, #752 ) ; +#817 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999940000, 76.51434852559523800, 6.999999999999999100 ) ) ; +#818 = DIRECTION ( 'NONE', ( 2.498001805406602200E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#819 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#820 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#821 = PLANE ( 'NONE', #721 ) ; +#822 = LINE ( 'NONE', #823, #746 ) ; +#823 = CARTESIAN_POINT ( 'NONE', ( 1.000000000000009500, 0.0000000000000000000, 5.408326913195871600 ) ) ; +#824 = DIRECTION ( 'NONE', ( -0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ; +#825 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999991100, 96.31333839881850200, 0.9999999999998898700 ) ) ; +#826 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 3.469446951953614200E-017 ) ) ; +#827 = DIRECTION ( 'NONE', ( 3.469446951953614200E-017, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#828 = PLANE ( 'NONE', #722 ) ; +#829 = CARTESIAN_POINT ( 'NONE', ( -0.9999999999999940000, 96.31333839881850200, 6.999999999999999100 ) ) ; +#830 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -2.498001805406602200E-016 ) ) ; +#831 = DIRECTION ( 'NONE', ( -2.498001805406602200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#832 = LINE ( 'NONE', #833, #734 ) ; +#833 = CARTESIAN_POINT ( 'NONE', ( 0.9999999999999922300, 76.51434852559523800, -7.000000000000200700 ) ) ; +#834 = DIRECTION ( 'NONE', ( -1.110223024625156500E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#835 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 76.51434852559523800, 0.0000000000000000000 ) ) ; +#836 = LINE ( 'NONE', #837, #765 ) ; +#837 = CARTESIAN_POINT ( 'NONE', ( 1.023486850826316200E-013, 76.51434852559523800, -6.999999999999999100 ) ) ; +#838 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#839 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#840 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#841 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#842 = LINE ( 'NONE', #843, #737 ) ; +#843 = CARTESIAN_POINT ( 'NONE', ( -1.000000000000013100, 76.51434852559523800, -1.000000000000091000 ) ) ; +#844 = DIRECTION ( 'NONE', ( 1.457167719820518000E-016, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#845 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#846 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#847 = PLANE ( 'NONE', #884 ) ; +#848 = CARTESIAN_POINT ( 'NONE', ( 5.499999999999978700, 5.514348525595180700, -1.110223024625156500E-013 ) ) ; +#849 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#850 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#851 = FILL_AREA_STYLE_COLOUR ( '', #612 ) ; +#852 = FILL_AREA_STYLE ('',( #851 ) ) ; +#853 = SURFACE_STYLE_FILL_AREA ( #852 ) ; +#854 = SURFACE_SIDE_STYLE ('',( #853 ) ) ; +#855 = SURFACE_STYLE_USAGE ( .BOTH. , #854 ) ; +#856 = PRESENTATION_STYLE_ASSIGNMENT (( #855 ) ) ; +#857 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#858 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#859 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#860 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#861 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#862 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#863 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #715 ) ; +#864 = FILL_AREA_STYLE_COLOUR ( '', #613 ) ; +#865 = FILL_AREA_STYLE ('',( #864 ) ) ; +#866 = SURFACE_STYLE_FILL_AREA ( #865 ) ; +#867 = SURFACE_SIDE_STYLE ('',( #866 ) ) ; +#868 = SURFACE_STYLE_USAGE ( .BOTH. , #867 ) ; +#869 = PRESENTATION_STYLE_ASSIGNMENT (( #868 ) ) ; +#870 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#871 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#872 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#873 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#874 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#875 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#876 = SHAPE_DEFINITION_REPRESENTATION ( #890, #587 ) ; +#877 = PRODUCT_CONTEXT ( 'NONE', #715, 'mechanical' ) ; +#878 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #716 ) ; +#879 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #588, .NOT_KNOWN. ) ; +#880 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #886 ) ) ; +#881 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #886 ), #761 ) ; +#882 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #885 ), #759 ) ; +#883 = AXIS2_PLACEMENT_3D ( 'NONE', #873, #874, #875 ) ; +#884 = AXIS2_PLACEMENT_3D ( 'NONE', #848, #849, #850 ) ; +#885 = STYLED_ITEM ( 'NONE', ( #856 ), #888 ) ; +#886 = STYLED_ITEM ( 'NONE', ( #869 ), #587 ) ; +#887 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #885 ) ) ; +#888 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude1', #10 ) ; +#889 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #716, 'design' ) ; +#890 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #611 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/hammer.step b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/hammer.step new file mode 100644 index 0000000..a523716 --- /dev/null +++ b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/hammer.step @@ -0,0 +1,237 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('hammer.step', + '2014-03-25T03:39:24', + ( 'eric' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2012', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = VECTOR ( 'NONE', #138, 1000.000000000000000 ) ; +#2 = FACE_OUTER_BOUND ( 'NONE', #44, .T. ) ; +#3 = AXIS2_PLACEMENT_3D ( 'NONE', #144, #143, #142 ) ; +#4 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #177, .NOT_KNOWN. ) ; +#5 = AXIS2_PLACEMENT_3D ( 'NONE', #132, #131, #130 ) ; +#6 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #65, #64 ) ; +#7 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #14 ), #178 ) ; +#8 = FACE_OUTER_BOUND ( 'NONE', #49, .T. ) ; +#9 = AXIS2_PLACEMENT_3D ( 'NONE', #129, #128, #127 ) ; +#10 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #14 ) ) ; +#11 = CLOSED_SHELL ( 'NONE', ( #208, #209, #180, #198, #199, #200, #207 ) ) ; +#12 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #21 ), #213 ) ; +#13 = VECTOR ( 'NONE', #89, 1000.000000000000000 ) ; +#14 = STYLED_ITEM ( 'NONE', ( #70 ), #217 ) ; +#15 = FACE_OUTER_BOUND ( 'NONE', #51, .T. ) ; +#16 = AXIS2_PLACEMENT_3D ( 'NONE', #141, #137, #136 ) ; +#17 = FACE_OUTER_BOUND ( 'NONE', #50, .T. ) ; +#18 = AXIS2_PLACEMENT_3D ( 'NONE', #135, #134, #133 ) ; +#19 = CYLINDRICAL_SURFACE ( 'NONE', #20, 1.500000000000012000 ) ; +#20 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #93, #92 ) ; +#21 = STYLED_ITEM ( 'NONE', ( #83 ), #214 ) ; +#22 = CYLINDRICAL_SURFACE ( 'NONE', #28, 2.000000000000007100 ) ; +#23 = FACE_OUTER_BOUND ( 'NONE', #46, .T. ) ; +#24 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #99, #98 ) ; +#25 = FACE_OUTER_BOUND ( 'NONE', #45, .T. ) ; +#26 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #146, #145 ) ; +#27 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #103, #102 ) ; +#28 = AXIS2_PLACEMENT_3D ( 'NONE', #97, #96, #95 ) ; +#29 = CYLINDRICAL_SURFACE ( 'NONE', #9, 1.500000000000012000 ) ; +#30 = VECTOR ( 'NONE', #110, 1000.000000000000000 ) ; +#31 = AXIS2_PLACEMENT_3D ( 'NONE', #116, #109, #108 ) ; +#32 = VECTOR ( 'NONE', #113, 1000.000000000000000 ) ; +#33 = AXIS2_PLACEMENT_3D ( 'NONE', #107, #106, #105 ) ; +#34 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #21 ) ) ; +#35 = CYLINDRICAL_SURFACE ( 'NONE', #40, 2.000000000000007100 ) ; +#36 = AXIS2_PLACEMENT_3D ( 'NONE', #125, #124, #123 ) ; +#37 = AXIS2_PLACEMENT_3D ( 'NONE', #119, #118, #117 ) ; +#38 = FACE_OUTER_BOUND ( 'NONE', #48, .T. ) ; +#39 = FACE_BOUND ( 'NONE', #47, .T. ) ; +#40 = AXIS2_PLACEMENT_3D ( 'NONE', #122, #121, #120 ) ; +#41 = ORIENTED_EDGE ( 'NONE', *, *, #206, .F. ) ; +#42 = ORIENTED_EDGE ( 'NONE', *, *, #203, .T. ) ; +#43 = ORIENTED_EDGE ( 'NONE', *, *, #194, .F. ) ; +#44 = EDGE_LOOP ( 'NONE', ( #173, #174 ) ) ; +#45 = EDGE_LOOP ( 'NONE', ( #54, #57, #56, #52 ) ) ; +#46 = EDGE_LOOP ( 'NONE', ( #53, #42, #41, #43 ) ) ; +#47 = EDGE_LOOP ( 'NONE', ( #158, #157 ) ) ; +#48 = EDGE_LOOP ( 'NONE', ( #159, #160, #161, #59 ) ) ; +#49 = EDGE_LOOP ( 'NONE', ( #162, #163 ) ) ; +#50 = EDGE_LOOP ( 'NONE', ( #172, #176, #58, #175 ) ) ; +#51 = EDGE_LOOP ( 'NONE', ( #60, #55 ) ) ; +#52 = ORIENTED_EDGE ( 'NONE', *, *, #202, .F. ) ; +#53 = ORIENTED_EDGE ( 'NONE', *, *, #204, .T. ) ; +#54 = ORIENTED_EDGE ( 'NONE', *, *, #205, .T. ) ; +#55 = ORIENTED_EDGE ( 'NONE', *, *, #197, .F. ) ; +#56 = ORIENTED_EDGE ( 'NONE', *, *, #201, .F. ) ; +#57 = ORIENTED_EDGE ( 'NONE', *, *, #210, .T. ) ; +#58 = ORIENTED_EDGE ( 'NONE', *, *, #194, .T. ) ; +#59 = ORIENTED_EDGE ( 'NONE', *, *, #193, .F. ) ; +#60 = ORIENTED_EDGE ( 'NONE', *, *, #205, .F. ) ; +#61 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #211 ) ; +#62 = PRODUCT_CONTEXT ( 'NONE', #212, 'mechanical' ) ; +#63 = SHAPE_DEFINITION_REPRESENTATION ( #215, #217 ) ; +#64 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#66 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#67 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#68 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#69 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#70 = PRESENTATION_STYLE_ASSIGNMENT (( #71 ) ) ; +#71 = SURFACE_STYLE_USAGE ( .BOTH. , #72 ) ; +#72 = SURFACE_SIDE_STYLE ('',( #73 ) ) ; +#73 = SURFACE_STYLE_FILL_AREA ( #74 ) ; +#74 = FILL_AREA_STYLE ('',( #75 ) ) ; +#75 = FILL_AREA_STYLE_COLOUR ( '', #185 ) ; +#76 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #212 ) ; +#77 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#78 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#79 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#80 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#81 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#82 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#83 = PRESENTATION_STYLE_ASSIGNMENT (( #84 ) ) ; +#84 = SURFACE_STYLE_USAGE ( .BOTH. , #85 ) ; +#85 = SURFACE_SIDE_STYLE ('',( #86 ) ) ; +#86 = SURFACE_STYLE_FILL_AREA ( #87 ) ; +#87 = FILL_AREA_STYLE ('',( #88 ) ) ; +#88 = FILL_AREA_STYLE_COLOUR ( '', #184 ) ; +#89 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#90 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000012000, 11.00000000000001100, 4.185053720765721200E-014 ) ) ; +#91 = LINE ( 'NONE', #90, #13 ) ; +#92 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781487300E-017 ) ) ; +#93 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#94 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ; +#95 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ; +#96 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#97 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ; +#98 = DIRECTION ( 'NONE', ( 1.000000000000000000, -3.548298019043442700E-016, -1.387778780781436000E-017 ) ) ; +#99 = DIRECTION ( 'NONE', ( -3.548298019043442700E-016, -1.000000000000000000, -2.157041537713712900E-032 ) ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999996700, 11.00000000000001100, 0.0000000000000000000 ) ) ; +#101 = PLANE ( 'NONE', #24 ) ; +#102 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781490700E-017 ) ) ; +#103 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 10.50000000000000900, 4.163336342344337000E-014 ) ) ; +#105 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ; +#106 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 10.50000000000000900, 4.163336342344337000E-014 ) ) ; +#108 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.548298019043442700E-016, 1.387778780781483600E-017 ) ) ; +#109 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#110 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#111 = CARTESIAN_POINT ( 'NONE', ( 1.500000000000017100, 11.00000000000001100, 4.179624376160375100E-014 ) ) ; +#112 = LINE ( 'NONE', #111, #30 ) ; +#113 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#114 = CARTESIAN_POINT ( 'NONE', ( -2.000000000000001800, 11.00000000000001100, 4.166111899905899900E-014 ) ) ; +#115 = LINE ( 'NONE', #114, #32 ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976807100E-015, 0.0000000000000000000, 4.163336342344337000E-014 ) ) ; +#117 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ; +#118 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#119 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ; +#120 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ; +#121 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ; +#123 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.548298019043442700E-016, 1.387778780781436000E-017 ) ) ; +#124 = DIRECTION ( 'NONE', ( 3.548298019043442700E-016, 1.000000000000000000, 2.157041537713712900E-032 ) ) ; +#125 = CARTESIAN_POINT ( 'NONE', ( 1.500000000000037700, 10.50000000000000900, -3.469446951953614200E-014 ) ) ; +#126 = PLANE ( 'NONE', #36 ) ; +#127 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781487300E-017 ) ) ; +#128 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#129 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ; +#130 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ; +#131 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#132 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 10.50000000000000900, 4.163336342344337000E-014 ) ) ; +#133 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781490700E-017 ) ) ; +#134 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 10.50000000000000900, 4.163336342344337000E-014 ) ) ; +#136 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.548298019043442700E-016, 1.387778780781483600E-017 ) ) ; +#137 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#138 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( -1.500000000000006700, 11.00000000000001100, 4.165418010515509200E-014 ) ) ; +#140 = LINE ( 'NONE', #139, #1 ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976807100E-015, 0.0000000000000000000, 4.163336342344337000E-014 ) ) ; +#142 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 1.387778780781287900E-017 ) ) ; +#143 = DIRECTION ( 'NONE', ( 3.548298019043504800E-016, 1.000000000000000000, 2.157041537713704200E-032 ) ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 5.204170427930421300E-015, 11.00000000000001100, 4.163336342344337000E-014 ) ) ; +#145 = DIRECTION ( 'NONE', ( -1.000000000000000000, 3.548298019043442700E-016, 1.387778780781436000E-017 ) ) ; +#146 = DIRECTION ( 'NONE', ( 3.548298019043442700E-016, 1.000000000000000000, 2.157041537713712900E-032 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 1.734723475976807100E-015, 0.0000000000000000000, 4.163336342344337000E-014 ) ) ; +#148 = PLANE ( 'NONE', #26 ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( -2.000000000000001800, 10.50000000000000900, 4.166111899905899900E-014 ) ) ; +#150 = CARTESIAN_POINT ( 'NONE', ( -1.500000000000003100, 10.50000000000000900, 4.165418010515509200E-014 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 1.500000000000002900, 10.50000000000000900, 4.179624376160375100E-014 ) ) ; +#152 = CARTESIAN_POINT ( 'NONE', ( 1.500000000000006900, -5.322447028565272500E-016, 4.179624376160375100E-014 ) ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( -1.500000000000014200, 5.322447028565220300E-016, 4.165418010515509200E-014 ) ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( -2.000000000000001800, 11.00000000000001100, 4.166111899905899900E-014 ) ) ; +#155 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999997800, 11.00000000000001100, 4.185053720765721200E-014 ) ) ; +#156 = CARTESIAN_POINT ( 'NONE', ( 1.999999999999997800, 10.50000000000000900, 4.185053720765721200E-014 ) ) ; +#157 = ORIENTED_EDGE ( 'NONE', *, *, #196, .T. ) ; +#158 = ORIENTED_EDGE ( 'NONE', *, *, #206, .T. ) ; +#159 = ORIENTED_EDGE ( 'NONE', *, *, #210, .F. ) ; +#160 = ORIENTED_EDGE ( 'NONE', *, *, #197, .T. ) ; +#161 = ORIENTED_EDGE ( 'NONE', *, *, #202, .T. ) ; +#162 = ORIENTED_EDGE ( 'NONE', *, *, #201, .T. ) ; +#163 = ORIENTED_EDGE ( 'NONE', *, *, #193, .T. ) ; +#164 = VERTEX_POINT ( 'NONE', #156 ) ; +#165 = VERTEX_POINT ( 'NONE', #155 ) ; +#166 = VERTEX_POINT ( 'NONE', #154 ) ; +#167 = VERTEX_POINT ( 'NONE', #153 ) ; +#168 = VERTEX_POINT ( 'NONE', #152 ) ; +#169 = VERTEX_POINT ( 'NONE', #151 ) ; +#170 = VERTEX_POINT ( 'NONE', #150 ) ; +#171 = VERTEX_POINT ( 'NONE', #149 ) ; +#172 = ORIENTED_EDGE ( 'NONE', *, *, #203, .F. ) ; +#173 = ORIENTED_EDGE ( 'NONE', *, *, #204, .F. ) ; +#174 = ORIENTED_EDGE ( 'NONE', *, *, #195, .F. ) ; +#175 = ORIENTED_EDGE ( 'NONE', *, *, #196, .F. ) ; +#176 = ORIENTED_EDGE ( 'NONE', *, *, #195, .T. ) ; +#177 = PRODUCT ( 'hammer', 'hammer', '', ( #62 ) ) ; +#178 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #218 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #69, #68, #67 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#179 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #219 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #79, #78, #77 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#180 = ADVANCED_FACE ( 'NONE', ( #2 ), #148, .F. ) ; +#181 = CIRCLE ( 'NONE', #18, 1.500000000000008200 ) ; +#182 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #177 ) ) ; +#183 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #4, #216 ) ; +#184 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#185 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#186 = CIRCLE ( 'NONE', #27, 1.500000000000008200 ) ; +#187 = CIRCLE ( 'NONE', #33, 2.000000000000007100 ) ; +#188 = CIRCLE ( 'NONE', #37, 2.000000000000007100 ) ; +#189 = CIRCLE ( 'NONE', #3, 2.000000000000007100 ) ; +#190 = CIRCLE ( 'NONE', #31, 1.500000000000015800 ) ; +#191 = CIRCLE ( 'NONE', #5, 2.000000000000007100 ) ; +#192 = CIRCLE ( 'NONE', #16, 1.500000000000015800 ) ; +#193 = EDGE_CURVE ( 'NONE', #165, #166, #189, .T. ) ; +#194 = EDGE_CURVE ( 'NONE', #167, #170, #140, .T. ) ; +#195 = EDGE_CURVE ( 'NONE', #168, #167, #192, .T. ) ; +#196 = EDGE_CURVE ( 'NONE', #169, #170, #181, .T. ) ; +#197 = EDGE_CURVE ( 'NONE', #164, #171, #191, .T. ) ; +#198 = ADVANCED_FACE ( 'NONE', ( #17 ), #29, .T. ) ; +#199 = ADVANCED_FACE ( 'NONE', ( #15, #39 ), #126, .F. ) ; +#200 = ADVANCED_FACE ( 'NONE', ( #38 ), #35, .T. ) ; +#201 = EDGE_CURVE ( 'NONE', #166, #165, #188, .T. ) ; +#202 = EDGE_CURVE ( 'NONE', #171, #166, #115, .T. ) ; +#203 = EDGE_CURVE ( 'NONE', #168, #169, #112, .T. ) ; +#204 = EDGE_CURVE ( 'NONE', #167, #168, #190, .T. ) ; +#205 = EDGE_CURVE ( 'NONE', #171, #164, #187, .T. ) ; +#206 = EDGE_CURVE ( 'NONE', #170, #169, #186, .T. ) ; +#207 = ADVANCED_FACE ( 'NONE', ( #8 ), #101, .F. ) ; +#208 = ADVANCED_FACE ( 'NONE', ( #25 ), #22, .T. ) ; +#209 = ADVANCED_FACE ( 'NONE', ( #23 ), #19, .T. ) ; +#210 = EDGE_CURVE ( 'NONE', #164, #165, #91, .T. ) ; +#211 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#212 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#213 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #220 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #82, #81, #80 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#214 = MANIFOLD_SOLID_BREP ( 'Revolve1', #11 ) ; +#215 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #183 ) ; +#216 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #211, 'design' ) ; +#217 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'hammer', ( #214, #6 ), #179 ) ; +#218 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #69, 'distance_accuracy_value', 'NONE'); +#219 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #79, 'distance_accuracy_value', 'NONE'); +#220 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #82, 'distance_accuracy_value', 'NONE'); +ENDSEC; +END-ISO-10303-21; diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/impactFuse.step b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/impactFuse.step new file mode 100644 index 0000000..d7bafcb --- /dev/null +++ b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/impactFuse.step @@ -0,0 +1,311 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('impactFuse.step', + '2014-03-25T03:38:41', + ( 'eric' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2012', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = AXIS2_PLACEMENT_3D ( 'NONE', #75, #74, #73 ) ; +#2 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #12 ), #240 ) ; +#3 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #12 ) ) ; +#4 = AXIS2_PLACEMENT_3D ( 'NONE', #178, #177, #176 ) ; +#5 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #14 ), #242 ) ; +#6 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #138, #137 ) ; +#7 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #14 ) ) ; +#8 = VECTOR ( 'NONE', #101, 1000.000000000000000 ) ; +#9 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #174, #173 ) ; +#10 = AXIS2_PLACEMENT_3D ( 'NONE', #100, #99, #98 ) ; +#11 = AXIS2_PLACEMENT_3D ( 'NONE', #106, #105, #104 ) ; +#12 = STYLED_ITEM ( 'NONE', ( #79 ), #292 ) ; +#13 = FACE_BOUND ( 'NONE', #63, .T. ) ; +#14 = STYLED_ITEM ( 'NONE', ( #92 ), #289 ) ; +#15 = CYLINDRICAL_SURFACE ( 'NONE', #19, 2.000000000000000000 ) ; +#16 = AXIS2_PLACEMENT_3D ( 'NONE', #113, #112, #111 ) ; +#17 = FACE_OUTER_BOUND ( 'NONE', #61, .T. ) ; +#18 = FACE_OUTER_BOUND ( 'NONE', #60, .T. ) ; +#19 = AXIS2_PLACEMENT_3D ( 'NONE', #110, #109, #108 ) ; +#20 = CYLINDRICAL_SURFACE ( 'NONE', #22, 2.000000000000000000 ) ; +#21 = VECTOR ( 'NONE', #179, 1000.000000000000000 ) ; +#22 = AXIS2_PLACEMENT_3D ( 'NONE', #117, #116, #115 ) ; +#23 = FACE_BOUND ( 'NONE', #59, .T. ) ; +#24 = CYLINDRICAL_SURFACE ( 'NONE', #29, 2.625000000000000000 ) ; +#25 = AXIS2_PLACEMENT_3D ( 'NONE', #123, #122, #121 ) ; +#26 = FACE_OUTER_BOUND ( 'NONE', #62, .T. ) ; +#27 = FACE_OUTER_BOUND ( 'NONE', #67, .T. ) ; +#28 = FACE_OUTER_BOUND ( 'NONE', #66, .T. ) ; +#29 = AXIS2_PLACEMENT_3D ( 'NONE', #120, #119, #118 ) ; +#30 = CYLINDRICAL_SURFACE ( 'NONE', #31, 5.250000000000000000 ) ; +#31 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #126, #125 ) ; +#32 = FACE_BOUND ( 'NONE', #65, .T. ) ; +#33 = CYLINDRICAL_SURFACE ( 'NONE', #34, 5.250000000000000000 ) ; +#34 = AXIS2_PLACEMENT_3D ( 'NONE', #130, #129, #128 ) ; +#35 = FACE_OUTER_BOUND ( 'NONE', #64, .T. ) ; +#36 = AXIS2_PLACEMENT_3D ( 'NONE', #166, #165, #164 ) ; +#37 = CYLINDRICAL_SURFACE ( 'NONE', #40, 2.625000000000000000 ) ; +#38 = FACE_OUTER_BOUND ( 'NONE', #68, .T. ) ; +#39 = CLOSED_SHELL ( 'NONE', ( #274, #275, #279, #280, #281, #282, #276, #277, #278 ) ) ; +#40 = AXIS2_PLACEMENT_3D ( 'NONE', #133, #132, #131 ) ; +#41 = FACE_OUTER_BOUND ( 'NONE', #57, .T. ) ; +#42 = FACE_OUTER_BOUND ( 'NONE', #58, .T. ) ; +#43 = VECTOR ( 'NONE', #145, 1000.000000000000000 ) ; +#44 = AXIS2_PLACEMENT_3D ( 'NONE', #148, #144, #143 ) ; +#45 = AXIS2_PLACEMENT_3D ( 'NONE', #136, #135, #134 ) ; +#46 = AXIS2_PLACEMENT_3D ( 'NONE', #151, #150, #149 ) ; +#47 = VECTOR ( 'NONE', #157, 1000.000000000000000 ) ; +#48 = AXIS2_PLACEMENT_3D ( 'NONE', #163, #156, #155 ) ; +#49 = VECTOR ( 'NONE', #160, 1000.000000000000000 ) ; +#50 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #141, #140 ) ; +#51 = AXIS2_PLACEMENT_3D ( 'NONE', #154, #153, #152 ) ; +#52 = VECTOR ( 'NONE', #169, 1000.000000000000000 ) ; +#53 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #168, #167 ) ; +#54 = ORIENTED_EDGE ( 'NONE', *, *, #271, .F. ) ; +#55 = ORIENTED_EDGE ( 'NONE', *, *, #283, .F. ) ; +#56 = ORIENTED_EDGE ( 'NONE', *, *, #285, .F. ) ; +#57 = EDGE_LOOP ( 'NONE', ( #69, #213, #212, #214 ) ) ; +#58 = EDGE_LOOP ( 'NONE', ( #194, #196, #195, #197 ) ) ; +#59 = EDGE_LOOP ( 'NONE', ( #198, #225 ) ) ; +#60 = EDGE_LOOP ( 'NONE', ( #226, #228 ) ) ; +#61 = EDGE_LOOP ( 'NONE', ( #229, #230, #231, #227 ) ) ; +#62 = EDGE_LOOP ( 'NONE', ( #219, #220 ) ) ; +#63 = EDGE_LOOP ( 'NONE', ( #222, #221 ) ) ; +#64 = EDGE_LOOP ( 'NONE', ( #223, #224, #232, #233 ) ) ; +#65 = EDGE_LOOP ( 'NONE', ( #234, #236 ) ) ; +#66 = EDGE_LOOP ( 'NONE', ( #237, #54 ) ) ; +#67 = EDGE_LOOP ( 'NONE', ( #55, #56, #211, #235 ) ) ; +#68 = EDGE_LOOP ( 'NONE', ( #215, #217, #216, #218 ) ) ; +#69 = ORIENTED_EDGE ( 'NONE', *, *, #267, .F. ) ; +#70 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #287 ) ; +#71 = PRODUCT_CONTEXT ( 'NONE', #286, 'mechanical' ) ; +#72 = SHAPE_DEFINITION_REPRESENTATION ( #290, #292 ) ; +#73 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#74 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#77 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#78 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#79 = PRESENTATION_STYLE_ASSIGNMENT (( #80 ) ) ; +#80 = SURFACE_STYLE_USAGE ( .BOTH. , #81 ) ; +#81 = SURFACE_SIDE_STYLE ('',( #82 ) ) ; +#82 = SURFACE_STYLE_FILL_AREA ( #83 ) ; +#83 = FILL_AREA_STYLE ('',( #84 ) ) ; +#84 = FILL_AREA_STYLE_COLOUR ( '', #245 ) ; +#85 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #286 ) ; +#86 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#87 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#88 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#89 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#90 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#91 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#92 = PRESENTATION_STYLE_ASSIGNMENT (( #93 ) ) ; +#93 = SURFACE_STYLE_USAGE ( .BOTH. , #94 ) ; +#94 = SURFACE_SIDE_STYLE ('',( #95 ) ) ; +#95 = SURFACE_STYLE_FILL_AREA ( #96 ) ; +#96 = FILL_AREA_STYLE ('',( #97 ) ) ; +#97 = FILL_AREA_STYLE_COLOUR ( '', #247 ) ; +#98 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#99 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#100 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 35.94480724856418900, 0.0000000000000000000 ) ) ; +#101 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#102 = CARTESIAN_POINT ( 'NONE', ( 3.214697847761802100E-016, 0.0000000000000000000, 2.625000000000000000 ) ) ; +#103 = LINE ( 'NONE', #102, #8 ) ; +#104 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#105 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ; +#106 = CARTESIAN_POINT ( 'NONE', ( 2.000000000000001800, -1.555192751435785500, 0.0000000000000000000 ) ) ; +#107 = PLANE ( 'NONE', #11 ) ; +#108 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#109 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#111 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#112 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 2.624999999999998700, 0.0000000000000000000, 6.938893903907228400E-015 ) ) ; +#114 = PLANE ( 'NONE', #16 ) ; +#115 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#117 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#118 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#119 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#123 = CARTESIAN_POINT ( 'NONE', ( 2.624999999999998700, 35.94480724856418900, 6.938893903907228400E-015 ) ) ; +#124 = PLANE ( 'NONE', #25 ) ; +#125 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#126 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#128 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#130 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#131 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#134 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#135 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.555192751435785500, 0.0000000000000000000 ) ) ; +#137 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#138 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#140 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#141 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 35.94480724856418900, 0.0000000000000000000 ) ) ; +#143 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#144 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#146 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -5.250000000000000000 ) ) ; +#147 = LINE ( 'NONE', #146, #43 ) ; +#148 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.555192751435785500, 0.0000000000000000000 ) ) ; +#149 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#150 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.555192751435785500, 0.0000000000000000000 ) ) ; +#152 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#153 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 35.94480724856418900, 0.0000000000000000000 ) ) ; +#155 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#156 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#158 = CARTESIAN_POINT ( 'NONE', ( 6.429395695523604200E-016, 0.0000000000000000000, 5.250000000000000000 ) ) ; +#159 = LINE ( 'NONE', #158, #47 ) ; +#160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#161 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -2.625000000000000000 ) ) ; +#162 = LINE ( 'NONE', #161, #49 ) ; +#163 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 35.94480724856418900, 0.0000000000000000000 ) ) ; +#164 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#165 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#167 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#168 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#169 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#170 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -2.000000000000000000 ) ) ; +#171 = LINE ( 'NONE', #170, #52 ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#173 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#174 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.555192751435785500, 0.0000000000000000000 ) ) ; +#176 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#177 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#179 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 2.449293598294706400E-016, 0.0000000000000000000, 2.000000000000000000 ) ) ; +#181 = LINE ( 'NONE', #180, #21 ) ; +#182 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -2.000000000000000000 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 2.449293598294706400E-016, -1.555192751435785500, 2.000000000000000000 ) ) ; +#184 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.555192751435785500, -2.000000000000000000 ) ) ; +#185 = CARTESIAN_POINT ( 'NONE', ( 2.449293598294706400E-016, 0.0000000000000000000, 2.000000000000000000 ) ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, -1.555192751435785500, -5.250000000000000000 ) ) ; +#187 = CARTESIAN_POINT ( 'NONE', ( 6.429395695523604200E-016, -1.555192751435785500, 5.250000000000000000 ) ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( 6.429395695523604200E-016, 35.94480724856418900, 5.250000000000000000 ) ) ; +#189 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 35.94480724856418900, -5.250000000000000000 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -2.625000000000000000 ) ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( 3.214697847761802100E-016, 0.0000000000000000000, 2.625000000000000000 ) ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 3.214697847761802100E-016, 35.94480724856418900, 2.625000000000000000 ) ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 35.94480724856418900, -2.625000000000000000 ) ) ; +#194 = ORIENTED_EDGE ( 'NONE', *, *, #259, .F. ) ; +#195 = ORIENTED_EDGE ( 'NONE', *, *, #260, .T. ) ; +#196 = ORIENTED_EDGE ( 'NONE', *, *, #258, .T. ) ; +#197 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ; +#198 = ORIENTED_EDGE ( 'NONE', *, *, #262, .T. ) ; +#199 = VERTEX_POINT ( 'NONE', #193 ) ; +#200 = VERTEX_POINT ( 'NONE', #192 ) ; +#201 = VERTEX_POINT ( 'NONE', #191 ) ; +#202 = VERTEX_POINT ( 'NONE', #190 ) ; +#203 = VERTEX_POINT ( 'NONE', #189 ) ; +#204 = VERTEX_POINT ( 'NONE', #188 ) ; +#205 = VERTEX_POINT ( 'NONE', #187 ) ; +#206 = VERTEX_POINT ( 'NONE', #186 ) ; +#207 = VERTEX_POINT ( 'NONE', #185 ) ; +#208 = VERTEX_POINT ( 'NONE', #184 ) ; +#209 = VERTEX_POINT ( 'NONE', #183 ) ; +#210 = VERTEX_POINT ( 'NONE', #182 ) ; +#211 = ORIENTED_EDGE ( 'NONE', *, *, #264, .T. ) ; +#212 = ORIENTED_EDGE ( 'NONE', *, *, #263, .T. ) ; +#213 = ORIENTED_EDGE ( 'NONE', *, *, #283, .T. ) ; +#214 = ORIENTED_EDGE ( 'NONE', *, *, #264, .F. ) ; +#215 = ORIENTED_EDGE ( 'NONE', *, *, #266, .T. ) ; +#216 = ORIENTED_EDGE ( 'NONE', *, *, #268, .F. ) ; +#217 = ORIENTED_EDGE ( 'NONE', *, *, #265, .T. ) ; +#218 = ORIENTED_EDGE ( 'NONE', *, *, #269, .F. ) ; +#219 = ORIENTED_EDGE ( 'NONE', *, *, #268, .T. ) ; +#220 = ORIENTED_EDGE ( 'NONE', *, *, #270, .T. ) ; +#221 = ORIENTED_EDGE ( 'NONE', *, *, #260, .F. ) ; +#222 = ORIENTED_EDGE ( 'NONE', *, *, #273, .F. ) ; +#223 = ORIENTED_EDGE ( 'NONE', *, *, #265, .F. ) ; +#224 = ORIENTED_EDGE ( 'NONE', *, *, #271, .T. ) ; +#225 = ORIENTED_EDGE ( 'NONE', *, *, #259, .T. ) ; +#226 = ORIENTED_EDGE ( 'NONE', *, *, #272, .F. ) ; +#227 = ORIENTED_EDGE ( 'NONE', *, *, #273, .T. ) ; +#228 = ORIENTED_EDGE ( 'NONE', *, *, #263, .F. ) ; +#229 = ORIENTED_EDGE ( 'NONE', *, *, #258, .F. ) ; +#230 = ORIENTED_EDGE ( 'NONE', *, *, #262, .F. ) ; +#231 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ; +#232 = ORIENTED_EDGE ( 'NONE', *, *, #269, .T. ) ; +#233 = ORIENTED_EDGE ( 'NONE', *, *, #270, .F. ) ; +#234 = ORIENTED_EDGE ( 'NONE', *, *, #285, .T. ) ; +#235 = ORIENTED_EDGE ( 'NONE', *, *, #272, .T. ) ; +#236 = ORIENTED_EDGE ( 'NONE', *, *, #267, .T. ) ; +#237 = ORIENTED_EDGE ( 'NONE', *, *, #266, .F. ) ; +#238 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #78, 'distance_accuracy_value', 'NONE'); +#239 = PRODUCT ( 'impactFuse', 'impactFuse', '', ( #71 ) ) ; +#240 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #238 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #78, #77, #76 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#241 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #293 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #88, #87, #86 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#242 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #294 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #91, #90, #89 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#243 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #239 ) ) ; +#244 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #288, #291 ) ; +#245 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#246 = CIRCLE ( 'NONE', #10, 2.625000000000000000 ) ; +#247 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#248 = CIRCLE ( 'NONE', #45, 2.000000000000000000 ) ; +#249 = CIRCLE ( 'NONE', #6, 2.625000000000000000 ) ; +#250 = CIRCLE ( 'NONE', #50, 5.250000000000000000 ) ; +#251 = CIRCLE ( 'NONE', #44, 5.250000000000000000 ) ; +#252 = CIRCLE ( 'NONE', #46, 5.250000000000000000 ) ; +#253 = CIRCLE ( 'NONE', #51, 2.625000000000000000 ) ; +#254 = CIRCLE ( 'NONE', #53, 2.000000000000000000 ) ; +#255 = CIRCLE ( 'NONE', #9, 2.000000000000000000 ) ; +#256 = CIRCLE ( 'NONE', #4, 2.000000000000000000 ) ; +#257 = CIRCLE ( 'NONE', #36, 2.625000000000000000 ) ; +#258 = EDGE_CURVE ( 'NONE', #207, #209, #181, .T. ) ; +#259 = EDGE_CURVE ( 'NONE', #207, #210, #256, .T. ) ; +#260 = EDGE_CURVE ( 'NONE', #209, #208, #255, .T. ) ; +#261 = EDGE_CURVE ( 'NONE', #210, #208, #171, .T. ) ; +#262 = EDGE_CURVE ( 'NONE', #210, #207, #254, .T. ) ; +#263 = EDGE_CURVE ( 'NONE', #201, #202, #257, .T. ) ; +#264 = EDGE_CURVE ( 'NONE', #199, #202, #162, .T. ) ; +#265 = EDGE_CURVE ( 'NONE', #204, #205, #159, .T. ) ; +#266 = EDGE_CURVE ( 'NONE', #203, #204, #284, .T. ) ; +#267 = EDGE_CURVE ( 'NONE', #200, #199, #253, .T. ) ; +#268 = EDGE_CURVE ( 'NONE', #206, #205, #252, .T. ) ; +#269 = EDGE_CURVE ( 'NONE', #203, #206, #147, .T. ) ; +#270 = EDGE_CURVE ( 'NONE', #205, #206, #251, .T. ) ; +#271 = EDGE_CURVE ( 'NONE', #204, #203, #250, .T. ) ; +#272 = EDGE_CURVE ( 'NONE', #202, #201, #249, .T. ) ; +#273 = EDGE_CURVE ( 'NONE', #208, #209, #248, .T. ) ; +#274 = ADVANCED_FACE ( 'NONE', ( #41 ), #37, .F. ) ; +#275 = ADVANCED_FACE ( 'NONE', ( #38 ), #33, .T. ) ; +#276 = ADVANCED_FACE ( 'NONE', ( #35 ), #30, .T. ) ; +#277 = ADVANCED_FACE ( 'NONE', ( #32, #28 ), #124, .T. ) ; +#278 = ADVANCED_FACE ( 'NONE', ( #27 ), #24, .F. ) ; +#279 = ADVANCED_FACE ( 'NONE', ( #42 ), #20, .F. ) ; +#280 = ADVANCED_FACE ( 'NONE', ( #23, #18 ), #114, .T. ) ; +#281 = ADVANCED_FACE ( 'NONE', ( #17 ), #15, .F. ) ; +#282 = ADVANCED_FACE ( 'NONE', ( #26, #13 ), #107, .T. ) ; +#283 = EDGE_CURVE ( 'NONE', #200, #201, #103, .T. ) ; +#284 = CIRCLE ( 'NONE', #48, 5.250000000000000000 ) ; +#285 = EDGE_CURVE ( 'NONE', #199, #200, #246, .T. ) ; +#286 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#287 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#288 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #239, .NOT_KNOWN. ) ; +#289 = MANIFOLD_SOLID_BREP ( 'Revolve1', #39 ) ; +#290 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #244 ) ; +#291 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #287, 'design' ) ; +#292 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'impactFuse', ( #289, #1 ), #241 ) ; +#293 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #88, 'distance_accuracy_value', 'NONE'); +#294 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #91, 'distance_accuracy_value', 'NONE'); +ENDSEC; +END-ISO-10303-21; diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/nipple.step b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/nipple.step new file mode 100644 index 0000000..5742a6f --- /dev/null +++ b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/nipple.step @@ -0,0 +1,527 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('nipple.step', + '2014-03-25T03:39:06', + ( 'eric' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2012', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = VECTOR ( 'NONE', #153, 1000.000000000000000 ) ; +#2 = AXIS2_PLACEMENT_3D ( 'NONE', #149, #148, #147 ) ; +#3 = FACE_OUTER_BOUND ( 'NONE', #379, .T. ) ; +#4 = FACE_OUTER_BOUND ( 'NONE', #376, .T. ) ; +#5 = FACE_BOUND ( 'NONE', #386, .T. ) ; +#6 = AXIS2_PLACEMENT_3D ( 'NONE', #142, #141, #140 ) ; +#7 = FACE_OUTER_BOUND ( 'NONE', #373, .T. ) ; +#8 = VECTOR ( 'NONE', #234, 1000.000000000000000 ) ; +#9 = AXIS2_PLACEMENT_3D ( 'NONE', #217, #216, #213 ) ; +#10 = AXIS2_PLACEMENT_3D ( 'NONE', #245, #244, #243 ) ; +#11 = FACE_OUTER_BOUND ( 'NONE', #370, .T. ) ; +#12 = FACE_OUTER_BOUND ( 'NONE', #372, .T. ) ; +#13 = VECTOR ( 'NONE', #162, 1000.000000000000000 ) ; +#14 = CYLINDRICAL_SURFACE ( 'NONE', #6, 0.5080000000000000100 ) ; +#15 = VECTOR ( 'NONE', #165, 1000.000000000000000 ) ; +#16 = AXIS2_PLACEMENT_3D ( 'NONE', #168, #161, #160 ) ; +#17 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #158, #157 ) ; +#18 = VECTOR ( 'NONE', #174, 1000.000000000000000 ) ; +#19 = AXIS2_PLACEMENT_3D ( 'NONE', #248, #247, #246 ) ; +#20 = AXIS2_PLACEMENT_3D ( 'NONE', #180, #173, #172 ) ; +#21 = VECTOR ( 'NONE', #177, 1000.000000000000000 ) ; +#22 = FACE_BOUND ( 'NONE', #368, .T. ) ; +#23 = AXIS2_PLACEMENT_3D ( 'NONE', #171, #170, #169 ) ; +#24 = CLOSED_SHELL ( 'NONE', ( #429, #426, #427, #428, #468, #467, #469, #425, #470, #398, #397, #460, #458, #459, #445, #446 ) ) ; +#25 = AXIS2_PLACEMENT_3D ( 'NONE', #186, #185, #184 ) ; +#26 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #152, #151 ) ; +#27 = AXIS2_PLACEMENT_3D ( 'NONE', #190, #189, #188 ) ; +#28 = VECTOR ( 'NONE', #191, 1000.000000000000000 ) ; +#29 = FACE_OUTER_BOUND ( 'NONE', #375, .T. ) ; +#30 = VECTOR ( 'NONE', #194, 1000.000000000000000 ) ; +#31 = AXIS2_PLACEMENT_3D ( 'NONE', #183, #182, #181 ) ; +#32 = VECTOR ( 'NONE', #197, 1000.000000000000000 ) ; +#33 = FACE_OUTER_BOUND ( 'NONE', #378, .T. ) ; +#34 = VECTOR ( 'NONE', #222, 1000.000000000000000 ) ; +#35 = AXIS2_PLACEMENT_3D ( 'NONE', #60, #59, #58 ) ; +#36 = AXIS2_PLACEMENT_3D ( 'NONE', #66, #65, #64 ) ; +#37 = FACE_OUTER_BOUND ( 'NONE', #384, .T. ) ; +#38 = VECTOR ( 'NONE', #69, 1000.000000000000000 ) ; +#39 = AXIS2_PLACEMENT_3D ( 'NONE', #241, #242, #237 ) ; +#40 = AXIS2_PLACEMENT_3D ( 'NONE', #199, #68, #67 ) ; +#41 = VECTOR ( 'NONE', #72, 1000.000000000000000 ) ; +#42 = AXIS2_PLACEMENT_3D ( 'NONE', #63, #62, #61 ) ; +#43 = VECTOR ( 'NONE', #205, 1000.000000000000000 ) ; +#44 = AXIS2_PLACEMENT_3D ( 'NONE', #208, #204, #203 ) ; +#45 = VECTOR ( 'NONE', #211, 1000.000000000000000 ) ; +#46 = AXIS2_PLACEMENT_3D ( 'NONE', #214, #212, #207 ) ; +#47 = CYLINDRICAL_SURFACE ( 'NONE', #48, 0.5080000000000000100 ) ; +#48 = AXIS2_PLACEMENT_3D ( 'NONE', #220, #219, #218 ) ; +#49 = FACE_OUTER_BOUND ( 'NONE', #374, .T. ) ; +#50 = CYLINDRICAL_SURFACE ( 'NONE', #51, 2.625000000000000000 ) ; +#51 = AXIS2_PLACEMENT_3D ( 'NONE', #227, #223, #221 ) ; +#52 = FACE_OUTER_BOUND ( 'NONE', #377, .T. ) ; +#53 = FACE_OUTER_BOUND ( 'NONE', #369, .T. ) ; +#54 = CYLINDRICAL_SURFACE ( 'NONE', #55, 3.987800000000001300 ) ; +#55 = AXIS2_PLACEMENT_3D ( 'NONE', #230, #225, #226 ) ; +#56 = AXIS2_PLACEMENT_3D ( 'NONE', #233, #228, #229 ) ; +#57 = AXIS2_PLACEMENT_3D ( 'NONE', #236, #231, #232 ) ; +#58 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#60 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ; +#61 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589387300E-019, 0.0000000000000000000 ) ) ; +#62 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#63 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#64 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#65 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#66 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ; +#67 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#68 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#69 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 6.259272319258516500E-034, -1.000000000000000000 ) ) ; +#70 = CARTESIAN_POINT ( 'NONE', ( 2.260599999999970400, 6.714999999999971400, -3.700344148226945700 ) ) ; +#71 = LINE ( 'NONE', #70, #38 ) ; +#72 = DIRECTION ( 'NONE', ( 2.775557561562891400E-016, -1.131483842327501100E-033, 1.000000000000000000 ) ) ; +#73 = CARTESIAN_POINT ( 'NONE', ( -2.260600000000032600, 6.714999999999971400, -3.690079670700660700 ) ) ; +#74 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #477 ) ; +#75 = PRODUCT_CONTEXT ( 'NONE', #476, 'mechanical' ) ; +#76 = SHAPE_DEFINITION_REPRESENTATION ( #509, #391 ) ; +#77 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#78 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#79 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#80 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#81 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#82 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#83 = PRESENTATION_STYLE_ASSIGNMENT (( #84 ) ) ; +#84 = SURFACE_STYLE_USAGE ( .BOTH. , #85 ) ; +#85 = SURFACE_SIDE_STYLE ('',( #86 ) ) ; +#86 = SURFACE_STYLE_FILL_AREA ( #87 ) ; +#87 = FILL_AREA_STYLE ('',( #88 ) ) ; +#88 = FILL_AREA_STYLE_COLOUR ( '', #402 ) ; +#89 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #476 ) ; +#90 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#91 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#92 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#93 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#94 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#95 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#96 = PRESENTATION_STYLE_ASSIGNMENT (( #97 ) ) ; +#97 = SURFACE_STYLE_USAGE ( .BOTH. , #98 ) ; +#98 = SURFACE_SIDE_STYLE ('',( #99 ) ) ; +#99 = SURFACE_STYLE_FILL_AREA ( #100 ) ; +#100 = FILL_AREA_STYLE ('',( #101 ) ) ; +#101 = FILL_AREA_STYLE_COLOUR ( '', #403 ) ; +#102 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#103 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#104 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#105 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#106 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#107 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ; +#108 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#109 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#110 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#111 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#112 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#113 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#114 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#115 = DIRECTION ( 'NONE', ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#116 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#117 = PLANE ( 'NONE', #505 ) ; +#118 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#119 = DIRECTION ( 'NONE', ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#120 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#121 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 6.259272319258516500E-034, -1.000000000000000000 ) ) ; +#122 = CARTESIAN_POINT ( 'NONE', ( 2.260599999999997900, 8.890000000000009500, 0.0000000000000000000 ) ) ; +#123 = LINE ( 'NONE', #122, #482 ) ; +#124 = PLANE ( 'NONE', #507 ) ; +#125 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#126 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#127 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ; +#128 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#129 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#130 = DIRECTION ( 'NONE', ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ; +#131 = CARTESIAN_POINT ( 'NONE', ( 2.260599999999959800, 13.79219999999997600, -3.285153950730507000 ) ) ; +#132 = LINE ( 'NONE', #131, #485 ) ; +#133 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ; +#134 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589387300E-019, 0.0000000000000000000 ) ) ; +#135 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#136 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#137 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#138 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#139 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#140 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#141 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#142 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#143 = DIRECTION ( 'NONE', ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ; +#144 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589380100E-019, -4.451047380824905700E-067 ) ) ; +#145 = CARTESIAN_POINT ( 'NONE', ( 2.260599999999970400, -2.270623786609860000, -3.700344148226945700 ) ) ; +#146 = PLANE ( 'NONE', #480 ) ; +#147 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#148 = DIRECTION ( 'NONE', ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#149 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ; +#150 = PLANE ( 'NONE', #2 ) ; +#151 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#152 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#153 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#154 = CARTESIAN_POINT ( 'NONE', ( -2.260600000000001500, 13.79219999999997600, -3.285153950730465700 ) ) ; +#155 = LINE ( 'NONE', #154, #1 ) ; +#156 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ; +#157 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#158 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ; +#160 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#161 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#162 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#163 = CARTESIAN_POINT ( 'NONE', ( 3.987800000000001300, 13.79219999999997600, 4.883646505639816700E-016 ) ) ; +#164 = LINE ( 'NONE', #163, #13 ) ; +#165 = DIRECTION ( 'NONE', ( 0.02330972700157234900, -0.9997282914007746800, 7.220274947474401100E-034 ) ) ; +#166 = CARTESIAN_POINT ( 'NONE', ( 2.197099999999999800, 8.890000000000009500, 0.0000000000000000000 ) ) ; +#167 = LINE ( 'NONE', #166, #15 ) ; +#168 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ; +#169 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#170 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#171 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ; +#172 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#173 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#174 = DIRECTION ( 'NONE', ( -0.02330972700157234900, -0.9997282914007746800, 2.854618256147421400E-018 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( -2.197099999999999800, 8.890000000000009500, 2.690671482406649800E-016 ) ) ; +#176 = LINE ( 'NONE', #175, #18 ) ; +#177 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#178 = CARTESIAN_POINT ( 'NONE', ( -0.5080000000000000100, -1.718565121455408300E-019, 0.0000000000000000000 ) ) ; +#179 = LINE ( 'NONE', #178, #21 ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#181 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#182 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#184 = DIRECTION ( 'NONE', ( -2.775557561562891400E-016, 1.227780339546862900E-033, -1.000000000000000000 ) ) ; +#185 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.383002207589399300E-019, -2.775557561562891400E-016 ) ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( -2.260600000000032600, -2.270623786609860000, -3.690079670700660700 ) ) ; +#187 = PLANE ( 'NONE', #25 ) ; +#188 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#189 = DIRECTION ( 'NONE', ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ; +#191 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 2.260599999999970400, 13.79219999999997600, 3.285153950730423900 ) ) ; +#193 = LINE ( 'NONE', #192, #28 ) ; +#194 = DIRECTION ( 'NONE', ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( -2.260600000000049900, 13.79219999999997600, 3.285153950730431000 ) ) ; +#196 = LINE ( 'NONE', #195, #30 ) ; +#197 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#198 = LINE ( 'NONE', #73, #41 ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 6.715000000000026500, 0.0000000000000000000 ) ) ; +#200 = CARTESIAN_POINT ( 'NONE', ( -3.987800000000001300, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#201 = PLANE ( 'NONE', #27 ) ; +#202 = CARTESIAN_POINT ( 'NONE', ( 2.625000000000000000, 13.79219999999997600, 3.214697847761802100E-016 ) ) ; +#203 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#204 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#205 = DIRECTION ( 'NONE', ( 2.775557561562891400E-016, -1.131483842327501100E-033, 1.000000000000000000 ) ) ; +#206 = CARTESIAN_POINT ( 'NONE', ( -2.260600000000043200, 8.890000000000009500, -5.551115123125782700E-014 ) ) ; +#207 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#208 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#209 = LINE ( 'NONE', #206, #43 ) ; +#210 = CARTESIAN_POINT ( 'NONE', ( -2.625000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#211 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#212 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#213 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#214 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#215 = LINE ( 'NONE', #210, #45 ) ; +#216 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#217 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ; +#218 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#219 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#220 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#221 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#222 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#223 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#224 = LINE ( 'NONE', #202, #32 ) ; +#225 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#226 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#227 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#228 = DIRECTION ( 'NONE', ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ; +#229 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#230 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#231 = DIRECTION ( 'NONE', ( -3.383002207589386300E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#232 = DIRECTION ( 'NONE', ( -1.000000000000000000, -3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#233 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ; +#234 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#235 = PLANE ( 'NONE', #57 ) ; +#236 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ; +#237 = DIRECTION ( 'NONE', ( 1.000000000000000000, 3.383002207589386300E-019, 0.0000000000000000000 ) ) ; +#238 = LINE ( 'NONE', #239, #8 ) ; +#239 = CARTESIAN_POINT ( 'NONE', ( 0.5080000000000000100, 1.718565121455408300E-019, 6.221205739668554100E-017 ) ) ; +#240 = PLANE ( 'NONE', #39 ) ; +#241 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ; +#242 = DIRECTION ( 'NONE', ( 3.383002207589386300E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ; +#243 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#244 = DIRECTION ( 'NONE', ( 3.383002207589380100E-019, -1.000000000000000000, 7.222237291452134400E-034 ) ) ; +#245 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 8.890000000000009500, 0.0000000000000000000 ) ) ; +#246 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#247 = DIRECTION ( 'NONE', ( -3.383002207589380100E-019, 1.000000000000000000, -7.222237291452134400E-034 ) ) ; +#248 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ; +#249 = LINE ( 'NONE', #200, #34 ) ; +#250 = CARTESIAN_POINT ( 'NONE', ( 2.260599999999959800, 6.715000000000026500, -3.285153950730507000 ) ) ; +#251 = CARTESIAN_POINT ( 'NONE', ( 2.260599999999959800, 8.890000000000009500, -3.285153950730507000 ) ) ; +#252 = CARTESIAN_POINT ( 'NONE', ( -2.260600000000001500, 8.890000000000009500, -3.285153950730465700 ) ) ; +#253 = CARTESIAN_POINT ( 'NONE', ( -2.260600000000001500, 6.715000000000026500, -3.285153950730465700 ) ) ; +#254 = CARTESIAN_POINT ( 'NONE', ( 2.625000000000000000, 8.880380794922126000E-019, 3.214697847761802100E-016 ) ) ; +#255 = CARTESIAN_POINT ( 'NONE', ( -2.082800000000000700, 13.79219999999997600, 2.620682917835379400E-016 ) ) ; +#256 = CARTESIAN_POINT ( 'NONE', ( -3.987800000000001300, 6.715000000000026500, 4.687015335033693100E-033 ) ) ; +#257 = CARTESIAN_POINT ( 'NONE', ( -2.625000000000000000, -8.880380794922141400E-019, 0.0000000000000000000 ) ) ; +#258 = CARTESIAN_POINT ( 'NONE', ( 2.625000000000000000, 5.715000000000025600, 3.214697847761802100E-016 ) ) ; +#259 = CARTESIAN_POINT ( 'NONE', ( -2.260600000000049900, 8.890000000000009500, 3.285153950730431000 ) ) ; +#260 = CARTESIAN_POINT ( 'NONE', ( -0.5080000000000000100, 13.79219999999997600, 0.0000000000000000000 ) ) ; +#261 = CARTESIAN_POINT ( 'NONE', ( 0.5080000000000000100, 13.79219999999997600, 6.221205739668554100E-017 ) ) ; +#262 = CARTESIAN_POINT ( 'NONE', ( -0.5080000000000000100, -1.718565121455408300E-019, 0.0000000000000000000 ) ) ; +#263 = CARTESIAN_POINT ( 'NONE', ( 0.5080000000000000100, 1.718565121455405000E-019, 6.221205739668554100E-017 ) ) ; +#264 = CARTESIAN_POINT ( 'NONE', ( 3.987800000000000500, 5.715000000000025600, 4.883646505639815700E-016 ) ) ; +#265 = CARTESIAN_POINT ( 'NONE', ( 2.082800000000000700, 13.79219999999997600, -1.770242582507833700E-033 ) ) ; +#266 = CARTESIAN_POINT ( 'NONE', ( -2.197099999999999800, 8.890000000000009500, 2.690671482406649800E-016 ) ) ; +#267 = CARTESIAN_POINT ( 'NONE', ( -3.987800000000000500, 5.715000000000025600, 0.0000000000000000000 ) ) ; +#268 = CARTESIAN_POINT ( 'NONE', ( 3.987800000000001300, 6.715000000000026500, 4.883646505639816700E-016 ) ) ; +#269 = CARTESIAN_POINT ( 'NONE', ( 2.197099999999999800, 8.890000000000009500, -5.368140309194513200E-052 ) ) ; +#270 = CARTESIAN_POINT ( 'NONE', ( 2.260599999999970400, 6.715000000000026500, 3.285153950730423900 ) ) ; +#271 = CARTESIAN_POINT ( 'NONE', ( 2.260599999999970400, 8.890000000000009500, 3.285153950730423900 ) ) ; +#272 = CARTESIAN_POINT ( 'NONE', ( -2.625000000000000000, 5.715000000000025600, 0.0000000000000000000 ) ) ; +#273 = CARTESIAN_POINT ( 'NONE', ( -2.260600000000049900, 6.715000000000026500, 3.285153950730431000 ) ) ; +#274 = ORIENTED_EDGE ( 'NONE', *, *, #430, .F. ) ; +#275 = ORIENTED_EDGE ( 'NONE', *, *, #442, .T. ) ; +#276 = ORIENTED_EDGE ( 'NONE', *, *, #431, .F. ) ; +#277 = ORIENTED_EDGE ( 'NONE', *, *, #432, .F. ) ; +#278 = ORIENTED_EDGE ( 'NONE', *, *, #434, .T. ) ; +#279 = ORIENTED_EDGE ( 'NONE', *, *, #447, .F. ) ; +#280 = VERTEX_POINT ( 'NONE', #273 ) ; +#281 = VERTEX_POINT ( 'NONE', #272 ) ; +#282 = VERTEX_POINT ( 'NONE', #271 ) ; +#283 = VERTEX_POINT ( 'NONE', #270 ) ; +#284 = VERTEX_POINT ( 'NONE', #269 ) ; +#285 = VERTEX_POINT ( 'NONE', #268 ) ; +#286 = VERTEX_POINT ( 'NONE', #267 ) ; +#287 = VERTEX_POINT ( 'NONE', #266 ) ; +#288 = VERTEX_POINT ( 'NONE', #265 ) ; +#289 = VERTEX_POINT ( 'NONE', #264 ) ; +#290 = VERTEX_POINT ( 'NONE', #263 ) ; +#291 = VERTEX_POINT ( 'NONE', #262 ) ; +#292 = VERTEX_POINT ( 'NONE', #261 ) ; +#293 = VERTEX_POINT ( 'NONE', #260 ) ; +#294 = VERTEX_POINT ( 'NONE', #259 ) ; +#295 = VERTEX_POINT ( 'NONE', #258 ) ; +#296 = VERTEX_POINT ( 'NONE', #257 ) ; +#297 = VERTEX_POINT ( 'NONE', #256 ) ; +#298 = VERTEX_POINT ( 'NONE', #255 ) ; +#299 = VERTEX_POINT ( 'NONE', #254 ) ; +#300 = VERTEX_POINT ( 'NONE', #253 ) ; +#301 = VERTEX_POINT ( 'NONE', #252 ) ; +#302 = VERTEX_POINT ( 'NONE', #251 ) ; +#303 = VERTEX_POINT ( 'NONE', #250 ) ; +#304 = ORIENTED_EDGE ( 'NONE', *, *, #433, .F. ) ; +#305 = ORIENTED_EDGE ( 'NONE', *, *, #443, .F. ) ; +#306 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ; +#307 = ORIENTED_EDGE ( 'NONE', *, *, #456, .F. ) ; +#308 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ; +#309 = ORIENTED_EDGE ( 'NONE', *, *, #440, .T. ) ; +#310 = ORIENTED_EDGE ( 'NONE', *, *, #455, .T. ) ; +#311 = ORIENTED_EDGE ( 'NONE', *, *, #466, .F. ) ; +#312 = ORIENTED_EDGE ( 'NONE', *, *, #463, .F. ) ; +#313 = ORIENTED_EDGE ( 'NONE', *, *, #436, .T. ) ; +#314 = ORIENTED_EDGE ( 'NONE', *, *, #444, .F. ) ; +#315 = ORIENTED_EDGE ( 'NONE', *, *, #436, .F. ) ; +#316 = ORIENTED_EDGE ( 'NONE', *, *, #464, .T. ) ; +#317 = ORIENTED_EDGE ( 'NONE', *, *, #437, .T. ) ; +#318 = ORIENTED_EDGE ( 'NONE', *, *, #448, .T. ) ; +#319 = ORIENTED_EDGE ( 'NONE', *, *, #461, .F. ) ; +#320 = ORIENTED_EDGE ( 'NONE', *, *, #399, .F. ) ; +#321 = ORIENTED_EDGE ( 'NONE', *, *, #432, .T. ) ; +#322 = ORIENTED_EDGE ( 'NONE', *, *, #452, .T. ) ; +#323 = ORIENTED_EDGE ( 'NONE', *, *, #434, .F. ) ; +#324 = ORIENTED_EDGE ( 'NONE', *, *, #449, .F. ) ; +#325 = ORIENTED_EDGE ( 'NONE', *, *, #465, .T. ) ; +#326 = ORIENTED_EDGE ( 'NONE', *, *, #466, .T. ) ; +#327 = ORIENTED_EDGE ( 'NONE', *, *, #438, .T. ) ; +#328 = ORIENTED_EDGE ( 'NONE', *, *, #451, .F. ) ; +#329 = ORIENTED_EDGE ( 'NONE', *, *, #443, .T. ) ; +#330 = ORIENTED_EDGE ( 'NONE', *, *, #440, .F. ) ; +#331 = ORIENTED_EDGE ( 'NONE', *, *, #441, .F. ) ; +#332 = ORIENTED_EDGE ( 'NONE', *, *, #438, .F. ) ; +#333 = ORIENTED_EDGE ( 'NONE', *, *, #439, .T. ) ; +#334 = ORIENTED_EDGE ( 'NONE', *, *, #450, .F. ) ; +#335 = ORIENTED_EDGE ( 'NONE', *, *, #451, .T. ) ; +#336 = ORIENTED_EDGE ( 'NONE', *, *, #449, .T. ) ; +#337 = ORIENTED_EDGE ( 'NONE', *, *, #452, .F. ) ; +#338 = ORIENTED_EDGE ( 'NONE', *, *, #454, .T. ) ; +#339 = ORIENTED_EDGE ( 'NONE', *, *, #437, .F. ) ; +#340 = ORIENTED_EDGE ( 'NONE', *, *, #448, .F. ) ; +#341 = ORIENTED_EDGE ( 'NONE', *, *, #444, .T. ) ; +#342 = ORIENTED_EDGE ( 'NONE', *, *, #453, .T. ) ; +#343 = ORIENTED_EDGE ( 'NONE', *, *, #471, .T. ) ; +#344 = ORIENTED_EDGE ( 'NONE', *, *, #441, .T. ) ; +#345 = ORIENTED_EDGE ( 'NONE', *, *, #457, .F. ) ; +#346 = ORIENTED_EDGE ( 'NONE', *, *, #456, .T. ) ; +#347 = ORIENTED_EDGE ( 'NONE', *, *, #463, .T. ) ; +#348 = ORIENTED_EDGE ( 'NONE', *, *, #464, .F. ) ; +#349 = ORIENTED_EDGE ( 'NONE', *, *, #439, .F. ) ; +#350 = ORIENTED_EDGE ( 'NONE', *, *, #450, .T. ) ; +#351 = ORIENTED_EDGE ( 'NONE', *, *, #461, .T. ) ; +#352 = ORIENTED_EDGE ( 'NONE', *, *, #442, .F. ) ; +#353 = ORIENTED_EDGE ( 'NONE', *, *, #472, .T. ) ; +#354 = ORIENTED_EDGE ( 'NONE', *, *, #462, .F. ) ; +#355 = ORIENTED_EDGE ( 'NONE', *, *, #396, .F. ) ; +#356 = ORIENTED_EDGE ( 'NONE', *, *, #462, .T. ) ; +#357 = ORIENTED_EDGE ( 'NONE', *, *, #465, .F. ) ; +#358 = ORIENTED_EDGE ( 'NONE', *, *, #457, .T. ) ; +#359 = ORIENTED_EDGE ( 'NONE', *, *, #433, .T. ) ; +#360 = ORIENTED_EDGE ( 'NONE', *, *, #431, .T. ) ; +#361 = ORIENTED_EDGE ( 'NONE', *, *, #455, .F. ) ; +#362 = ORIENTED_EDGE ( 'NONE', *, *, #454, .F. ) ; +#363 = ORIENTED_EDGE ( 'NONE', *, *, #471, .F. ) ; +#364 = ORIENTED_EDGE ( 'NONE', *, *, #396, .T. ) ; +#365 = ORIENTED_EDGE ( 'NONE', *, *, #430, .T. ) ; +#366 = ORIENTED_EDGE ( 'NONE', *, *, #453, .F. ) ; +#367 = EDGE_LOOP ( 'NONE', ( #349, #354 ) ) ; +#368 = EDGE_LOOP ( 'NONE', ( #357, #328 ) ) ; +#369 = EDGE_LOOP ( 'NONE', ( #358, #359, #327, #326 ) ) ; +#370 = EDGE_LOOP ( 'NONE', ( #324, #323, #322, #325 ) ) ; +#371 = EDGE_LOOP ( 'NONE', ( #320, #319, #318, #321 ) ) ; +#372 = EDGE_LOOP ( 'NONE', ( #317, #316, #315 ) ) ; +#373 = EDGE_LOOP ( 'NONE', ( #313, #312, #311, #314 ) ) ; +#374 = EDGE_LOOP ( 'NONE', ( #310, #309, #308 ) ) ; +#375 = EDGE_LOOP ( 'NONE', ( #306, #305, #304, #307 ) ) ; +#376 = EDGE_LOOP ( 'NONE', ( #334, #336, #335, #337 ) ) ; +#377 = EDGE_LOOP ( 'NONE', ( #387, #389, #388, #340 ) ) ; +#378 = EDGE_LOOP ( 'NONE', ( #338, #342, #339, #341, #332, #329, #330, #331 ) ) ; +#379 = EDGE_LOOP ( 'NONE', ( #333, #275, #274, #276 ) ) ; +#380 = EDGE_LOOP ( 'NONE', ( #278, #350 ) ) ; +#381 = EDGE_LOOP ( 'NONE', ( #351, #353 ) ) ; +#382 = EDGE_LOOP ( 'NONE', ( #277, #279 ) ) ; +#383 = EDGE_LOOP ( 'NONE', ( #352, #356, #360, #355 ) ) ; +#384 = EDGE_LOOP ( 'NONE', ( #362, #363 ) ) ; +#385 = EDGE_LOOP ( 'NONE', ( #366, #343, #344, #361, #346, #345, #347, #348 ) ) ; +#386 = EDGE_LOOP ( 'NONE', ( #365, #364 ) ) ; +#387 = ORIENTED_EDGE ( 'NONE', *, *, #472, .F. ) ; +#388 = ORIENTED_EDGE ( 'NONE', *, *, #447, .T. ) ; +#389 = ORIENTED_EDGE ( 'NONE', *, *, #399, .T. ) ; +#390 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #92, 'distance_accuracy_value', 'NONE'); +#391 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'nipple', ( #510, #490 ), #474 ) ; +#392 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #82, 'distance_accuracy_value', 'NONE'); +#393 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #95, 'distance_accuracy_value', 'NONE'); +#394 = PRODUCT ( 'nipple', 'nipple', '', ( #75 ) ) ; +#395 = CONICAL_SURFACE ( 'NONE', #10, 2.197099999999999800, 0.02331183838213687200 ) ; +#396 = EDGE_CURVE ( 'NONE', #295, #281, #424, .T. ) ; +#397 = ADVANCED_FACE ( 'NONE', ( #11 ), #395, .T. ) ; +#398 = ADVANCED_FACE ( 'NONE', ( #22, #53 ), #240, .F. ) ; +#399 = EDGE_CURVE ( 'NONE', #290, #292, #238, .T. ) ; +#400 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #394 ) ) ; +#401 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #488, #508 ) ; +#402 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#403 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#404 = CIRCLE ( 'NONE', #503, 0.5080000000000000100 ) ; +#405 = CIRCLE ( 'NONE', #479, 3.987800000000000500 ) ; +#406 = CIRCLE ( 'NONE', #506, 2.197099999999999800 ) ; +#407 = CIRCLE ( 'NONE', #484, 3.987800000000001300 ) ; +#408 = CIRCLE ( 'NONE', #486, 0.5080000000000000100 ) ; +#409 = CIRCLE ( 'NONE', #495, 2.625000000000000000 ) ; +#410 = CIRCLE ( 'NONE', #26, 3.987800000000001300 ) ; +#411 = CIRCLE ( 'NONE', #17, 3.987800000000001300 ) ; +#412 = CIRCLE ( 'NONE', #16, 3.987800000000000500 ) ; +#413 = CIRCLE ( 'NONE', #23, 2.197099999999999800 ) ; +#414 = CIRCLE ( 'NONE', #20, 2.082800000000000700 ) ; +#415 = CIRCLE ( 'NONE', #31, 0.5080000000000000100 ) ; +#416 = CIRCLE ( 'NONE', #35, 3.987800000000001300 ) ; +#417 = CIRCLE ( 'NONE', #42, 2.625000000000000000 ) ; +#418 = CIRCLE ( 'NONE', #36, 3.987800000000001300 ) ; +#419 = CIRCLE ( 'NONE', #40, 3.987800000000001300 ) ; +#420 = CIRCLE ( 'NONE', #44, 2.082800000000000700 ) ; +#421 = CIRCLE ( 'NONE', #9, 2.625000000000000000 ) ; +#422 = CIRCLE ( 'NONE', #46, 0.5080000000000000100 ) ; +#423 = CONICAL_SURFACE ( 'NONE', #56, 2.197099999999999800, 0.02331183838213687200 ) ; +#424 = CIRCLE ( 'NONE', #19, 2.625000000000000000 ) ; +#425 = ADVANCED_FACE ( 'NONE', ( #37, #5 ), #235, .F. ) ; +#426 = ADVANCED_FACE ( 'NONE', ( #4 ), #423, .T. ) ; +#427 = ADVANCED_FACE ( 'NONE', ( #33 ), #54, .T. ) ; +#428 = ADVANCED_FACE ( 'NONE', ( #3 ), #50, .T. ) ; +#429 = ADVANCED_FACE ( 'NONE', ( #52 ), #47, .F. ) ; +#430 = EDGE_CURVE ( 'NONE', #281, #295, #421, .T. ) ; +#431 = EDGE_CURVE ( 'NONE', #296, #281, #215, .T. ) ; +#432 = EDGE_CURVE ( 'NONE', #293, #292, #422, .T. ) ; +#433 = EDGE_CURVE ( 'NONE', #301, #294, #209, .T. ) ; +#434 = EDGE_CURVE ( 'NONE', #288, #298, #420, .T. ) ; +#435 = EDGE_CURVE ( 'NONE', #300, #280, #198, .T. ) ; +#436 = EDGE_CURVE ( 'NONE', #283, #303, #71, .T. ) ; +#437 = EDGE_CURVE ( 'NONE', #283, #285, #419, .T. ) ; +#438 = EDGE_CURVE ( 'NONE', #294, #282, #418, .T. ) ; +#439 = EDGE_CURVE ( 'NONE', #296, #299, #417, .T. ) ; +#440 = EDGE_CURVE ( 'NONE', #297, #280, #416, .T. ) ; +#441 = EDGE_CURVE ( 'NONE', #286, #297, #249, .T. ) ; +#442 = EDGE_CURVE ( 'NONE', #299, #295, #224, .T. ) ; +#443 = EDGE_CURVE ( 'NONE', #294, #280, #196, .T. ) ; +#444 = EDGE_CURVE ( 'NONE', #283, #282, #193, .T. ) ; +#445 = ADVANCED_FACE ( 'NONE', ( #49 ), #201, .T. ) ; +#446 = ADVANCED_FACE ( 'NONE', ( #29 ), #187, .F. ) ; +#447 = EDGE_CURVE ( 'NONE', #292, #293, #415, .T. ) ; +#448 = EDGE_CURVE ( 'NONE', #291, #293, #179, .T. ) ; +#449 = EDGE_CURVE ( 'NONE', #298, #287, #176, .T. ) ; +#450 = EDGE_CURVE ( 'NONE', #298, #288, #414, .T. ) ; +#451 = EDGE_CURVE ( 'NONE', #287, #284, #413, .T. ) ; +#452 = EDGE_CURVE ( 'NONE', #288, #284, #167, .T. ) ; +#453 = EDGE_CURVE ( 'NONE', #289, #285, #164, .T. ) ; +#454 = EDGE_CURVE ( 'NONE', #286, #289, #412, .T. ) ; +#455 = EDGE_CURVE ( 'NONE', #300, #297, #411, .T. ) ; +#456 = EDGE_CURVE ( 'NONE', #300, #301, #155, .T. ) ; +#457 = EDGE_CURVE ( 'NONE', #302, #301, #410, .T. ) ; +#458 = ADVANCED_FACE ( 'NONE', ( #12 ), #150, .T. ) ; +#459 = ADVANCED_FACE ( 'NONE', ( #7 ), #146, .F. ) ; +#460 = ADVANCED_FACE ( 'NONE', ( #493 ), #14, .F. ) ; +#461 = EDGE_CURVE ( 'NONE', #291, #290, #408, .T. ) ; +#462 = EDGE_CURVE ( 'NONE', #299, #296, #409, .T. ) ; +#463 = EDGE_CURVE ( 'NONE', #302, #303, #132, .T. ) ; +#464 = EDGE_CURVE ( 'NONE', #285, #303, #407, .T. ) ; +#465 = EDGE_CURVE ( 'NONE', #284, #287, #406, .T. ) ; +#466 = EDGE_CURVE ( 'NONE', #282, #302, #123, .T. ) ; +#467 = ADVANCED_FACE ( 'NONE', ( #478, #498 ), #124, .F. ) ; +#468 = ADVANCED_FACE ( 'NONE', ( #481, #483 ), #117, .T. ) ; +#469 = ADVANCED_FACE ( 'NONE', ( #494 ), #504, .T. ) ; +#470 = ADVANCED_FACE ( 'NONE', ( #487 ), #501, .T. ) ; +#471 = EDGE_CURVE ( 'NONE', #289, #286, #405, .T. ) ; +#472 = EDGE_CURVE ( 'NONE', #290, #291, #404, .T. ) ; +#473 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #393 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #95, #94, #93 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#474 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #390 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #92, #91, #90 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#475 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #392 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #82, #81, #80 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#476 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#477 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#478 = FACE_BOUND ( 'NONE', #381, .T. ) ; +#479 = AXIS2_PLACEMENT_3D ( 'NONE', #107, #106, #105 ) ; +#480 = AXIS2_PLACEMENT_3D ( 'NONE', #145, #144, #143 ) ; +#481 = FACE_BOUND ( 'NONE', #382, .T. ) ; +#482 = VECTOR ( 'NONE', #121, 1000.000000000000000 ) ; +#483 = FACE_OUTER_BOUND ( 'NONE', #380, .T. ) ; +#484 = AXIS2_PLACEMENT_3D ( 'NONE', #133, #129, #128 ) ; +#485 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ; +#486 = AXIS2_PLACEMENT_3D ( 'NONE', #139, #138, #137 ) ; +#487 = FACE_OUTER_BOUND ( 'NONE', #385, .T. ) ; +#488 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #394, .NOT_KNOWN. ) ; +#489 = AXIS2_PLACEMENT_3D ( 'NONE', #113, #112, #111 ) ; +#490 = AXIS2_PLACEMENT_3D ( 'NONE', #79, #78, #77 ) ; +#491 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #500 ), #475 ) ; +#492 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #500 ) ) ; +#493 = FACE_OUTER_BOUND ( 'NONE', #371, .T. ) ; +#494 = FACE_OUTER_BOUND ( 'NONE', #383, .T. ) ; +#495 = AXIS2_PLACEMENT_3D ( 'NONE', #136, #135, #134 ) ; +#496 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #499 ), #473 ) ; +#497 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #499 ) ) ; +#498 = FACE_OUTER_BOUND ( 'NONE', #367, .T. ) ; +#499 = STYLED_ITEM ( 'NONE', ( #96 ), #510 ) ; +#500 = STYLED_ITEM ( 'NONE', ( #83 ), #391 ) ; +#501 = CYLINDRICAL_SURFACE ( 'NONE', #502, 3.987800000000001300 ) ; +#502 = AXIS2_PLACEMENT_3D ( 'NONE', #110, #109, #108 ) ; +#503 = AXIS2_PLACEMENT_3D ( 'NONE', #104, #103, #102 ) ; +#504 = CYLINDRICAL_SURFACE ( 'NONE', #489, 2.625000000000000000 ) ; +#505 = AXIS2_PLACEMENT_3D ( 'NONE', #116, #115, #114 ) ; +#506 = AXIS2_PLACEMENT_3D ( 'NONE', #127, #126, #125 ) ; +#507 = AXIS2_PLACEMENT_3D ( 'NONE', #120, #119, #118 ) ; +#508 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #477, 'design' ) ; +#509 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #401 ) ; +#510 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude2', #24 ) ; +ENDSEC; +END-ISO-10303-21; diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/nose.step b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/nose.step new file mode 100644 index 0000000..cee31a5 --- /dev/null +++ b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STEP/nose.step @@ -0,0 +1,333 @@ +ISO-10303-21; +HEADER; +FILE_DESCRIPTION (( 'STEP AP214' ), + '1' ); +FILE_NAME ('nose.step', + '2014-03-25T03:40:27', + ( 'eric' ), + ( '' ), + 'SwSTEP 2.0', + 'SolidWorks 2012', + '' ); +FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' )); +ENDSEC; + +DATA; +#1 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #4 ), #54 ) ; +#2 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #4 ) ) ; +#3 = VECTOR ( 'NONE', #140, 1000.000000000000000 ) ; +#4 = STYLED_ITEM ( 'NONE', ( #110 ), #312 ) ; +#5 = AXIS2_PLACEMENT_3D ( 'NONE', #121, #120, #119 ) ; +#6 = AXIS2_PLACEMENT_3D ( 'NONE', #118, #117, #116 ) ; +#7 = AXIS2_PLACEMENT_3D ( 'NONE', #186, #185, #184 ) ; +#8 = AXIS2_PLACEMENT_3D ( 'NONE', #124, #123, #122 ) ; +#9 = STYLED_ITEM ( 'NONE', ( #97 ), #314 ) ; +#10 = FACE_OUTER_BOUND ( 'NONE', #231, .T. ) ; +#11 = AXIS2_PLACEMENT_3D ( 'NONE', #147, #146, #145 ) ; +#12 = VECTOR ( 'NONE', #137, 1000.000000000000000 ) ; +#13 = AXIS2_PLACEMENT_3D ( 'NONE', #144, #133, #132 ) ; +#14 = VECTOR ( 'NONE', #150, 1000.000000000000000 ) ; +#15 = FACE_BOUND ( 'NONE', #230, .T. ) ; +#16 = FACE_OUTER_BOUND ( 'NONE', #229, .T. ) ; +#17 = FACE_OUTER_BOUND ( 'NONE', #226, .T. ) ; +#18 = CYLINDRICAL_SURFACE ( 'NONE', #7, 1.500000000000000000 ) ; +#19 = AXIS2_PLACEMENT_3D ( 'NONE', #153, #149, #148 ) ; +#20 = AXIS2_PLACEMENT_3D ( 'NONE', #131, #130, #129 ) ; +#21 = AXIS2_PLACEMENT_3D ( 'NONE', #128, #127, #126 ) ; +#22 = AXIS2_PLACEMENT_3D ( 'NONE', #163, #162, #160 ) ; +#23 = VECTOR ( 'NONE', #134, 1000.000000000000000 ) ; +#24 = CLOSED_SHELL ( 'NONE', ( #258, #255, #259, #257, #254, #260, #263, #262, #264, #301 ) ) ; +#25 = VECTOR ( 'NONE', #166, 1000.000000000000000 ) ; +#26 = FACE_OUTER_BOUND ( 'NONE', #225, .T. ) ; +#27 = AXIS2_PLACEMENT_3D ( 'NONE', #169, #165, #164 ) ; +#28 = AXIS2_PLACEMENT_3D ( 'NONE', #172, #171, #170 ) ; +#29 = VECTOR ( 'NONE', #176, 1000.000000000000000 ) ; +#30 = AXIS2_PLACEMENT_3D ( 'NONE', #159, #158, #157 ) ; +#31 = CYLINDRICAL_SURFACE ( 'NONE', #32, 1.999999999999999600 ) ; +#32 = AXIS2_PLACEMENT_3D ( 'NONE', #180, #203, #205 ) ; +#33 = AXIS2_PLACEMENT_3D ( 'NONE', #156, #155, #154 ) ; +#34 = CYLINDRICAL_SURFACE ( 'NONE', #35, 7.500000000000000000 ) ; +#35 = AXIS2_PLACEMENT_3D ( 'NONE', #58, #221, #181 ) ; +#36 = AXIS2_PLACEMENT_3D ( 'NONE', #175, #174, #173 ) ; +#37 = FACE_OUTER_BOUND ( 'NONE', #234, .T. ) ; +#38 = AXIS2_PLACEMENT_3D ( 'NONE', #75, #74, #73 ) ; +#39 = AXIS2_PLACEMENT_3D ( 'NONE', #72, #71, #70 ) ; +#40 = FACE_OUTER_BOUND ( 'NONE', #224, .T. ) ; +#41 = AXIS2_PLACEMENT_3D ( 'NONE', #69, #67, #61 ) ; +#42 = FACE_BOUND ( 'NONE', #235, .T. ) ; +#43 = FACE_OUTER_BOUND ( 'NONE', #223, .T. ) ; +#44 = CYLINDRICAL_SURFACE ( 'NONE', #45, 7.500000000000000000 ) ; +#45 = AXIS2_PLACEMENT_3D ( 'NONE', #81, #80, #79 ) ; +#46 = FACE_OUTER_BOUND ( 'NONE', #227, .T. ) ; +#47 = CYLINDRICAL_SURFACE ( 'NONE', #48, 1.999999999999999600 ) ; +#48 = AXIS2_PLACEMENT_3D ( 'NONE', #84, #83, #82 ) ; +#49 = FACE_OUTER_BOUND ( 'NONE', #232, .T. ) ; +#50 = CYLINDRICAL_SURFACE ( 'NONE', #51, 1.500000000000000000 ) ; +#51 = AXIS2_PLACEMENT_3D ( 'NONE', #87, #86, #85 ) ; +#52 = AXIS2_PLACEMENT_3D ( 'NONE', #183, #179, #178 ) ; +#53 = FACE_OUTER_BOUND ( 'NONE', #228, .T. ) ; +#54 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #313 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #109, #108, #107 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#55 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #316 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #106, #105, #104 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#56 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #315 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #96, #95, #94 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) ); +#57 = ORIENTED_EDGE ( 'NONE', *, *, #298, .F. ) ; +#58 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#59 = ORIENTED_EDGE ( 'NONE', *, *, #291, .F. ) ; +#60 = ORIENTED_EDGE ( 'NONE', *, *, #292, .F. ) ; +#61 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#62 = ORIENTED_EDGE ( 'NONE', *, *, #288, .T. ) ; +#63 = ORIENTED_EDGE ( 'NONE', *, *, #297, .T. ) ; +#64 = ORIENTED_EDGE ( 'NONE', *, *, #298, .T. ) ; +#65 = ORIENTED_EDGE ( 'NONE', *, *, #299, .F. ) ; +#66 = ORIENTED_EDGE ( 'NONE', *, *, #287, .F. ) ; +#67 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#68 = ORIENTED_EDGE ( 'NONE', *, *, #296, .T. ) ; +#69 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.500000000000003100, 0.0000000000000000000 ) ) ; +#70 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#71 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#72 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.500000000000003100, 0.0000000000000000000 ) ) ; +#73 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#74 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#75 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#76 = PLANE ( 'NONE', #38 ) ; +#77 = VERTEX_POINT ( 'NONE', #199 ) ; +#78 = ORIENTED_EDGE ( 'NONE', *, *, #297, .F. ) ; +#79 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#80 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#81 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#82 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#83 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#84 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#85 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#86 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#87 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#88 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #305 ) ; +#89 = PRODUCT_CONTEXT ( 'NONE', #304, 'mechanical' ) ; +#90 = SHAPE_DEFINITION_REPRESENTATION ( #311, #314 ) ; +#91 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#92 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#93 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#94 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#95 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#96 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#97 = PRESENTATION_STYLE_ASSIGNMENT (( #98 ) ) ; +#98 = SURFACE_STYLE_USAGE ( .BOTH. , #99 ) ; +#99 = SURFACE_SIDE_STYLE ('',( #100 ) ) ; +#100 = SURFACE_STYLE_FILL_AREA ( #101 ) ; +#101 = FILL_AREA_STYLE ('',( #102 ) ) ; +#102 = FILL_AREA_STYLE_COLOUR ( '', #268 ) ; +#103 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #304 ) ; +#104 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#105 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#106 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#107 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) ); +#108 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) ); +#109 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) ); +#110 = PRESENTATION_STYLE_ASSIGNMENT (( #111 ) ) ; +#111 = SURFACE_STYLE_USAGE ( .BOTH. , #112 ) ; +#112 = SURFACE_SIDE_STYLE ('',( #113 ) ) ; +#113 = SURFACE_STYLE_FILL_AREA ( #114 ) ; +#114 = FILL_AREA_STYLE ('',( #115 ) ) ; +#115 = FILL_AREA_STYLE_COLOUR ( '', #269 ) ; +#116 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#117 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#118 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#119 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#120 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#121 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#122 = DIRECTION ( 'NONE', ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ; +#123 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ; +#124 = CARTESIAN_POINT ( 'NONE', ( 1.499999999999999600, 9.445493555586548200, 0.0000000000000000000 ) ) ; +#125 = PLANE ( 'NONE', #8 ) ; +#126 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#127 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#128 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.945493555586548200, 0.0000000000000000000 ) ) ; +#129 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#130 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#131 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.445493555586548200, 0.0000000000000000000 ) ) ; +#132 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#133 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#134 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#135 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.500000000000000000 ) ) ; +#136 = LINE ( 'NONE', #135, #23 ) ; +#137 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#138 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -7.500000000000000000 ) ) ; +#139 = LINE ( 'NONE', #138, #12 ) ; +#140 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#141 = CARTESIAN_POINT ( 'NONE', ( 1.836970198721029900E-016, 0.0000000000000000000, 1.500000000000000000 ) ) ; +#142 = ORIENTED_EDGE ( 'NONE', *, *, #295, .F. ) ; +#143 = LINE ( 'NONE', #141, #3 ) ; +#144 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#145 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#146 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#147 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#148 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#149 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#150 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#151 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605147900E-016, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#152 = LINE ( 'NONE', #151, #14 ) ; +#153 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.445493555586548200, 0.0000000000000000000 ) ) ; +#154 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#155 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#156 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.500000000000003100, 0.0000000000000000000 ) ) ; +#157 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#158 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#159 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.945493555586548200, 0.0000000000000000000 ) ) ; +#160 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#161 = ORIENTED_EDGE ( 'NONE', *, *, #261, .T. ) ; +#162 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#163 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.445493555586548200, 0.0000000000000000000 ) ) ; +#164 = DIRECTION ( 'NONE', ( -1.224646799147353200E-016, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#165 = DIRECTION ( 'NONE', ( 1.000000000000000000, 0.0000000000000000000, -1.224646799147353200E-016 ) ) ; +#166 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#167 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.999999999999999600 ) ) ; +#168 = LINE ( 'NONE', #167, #25 ) ; +#169 = CARTESIAN_POINT ( 'NONE', ( 1.191872225355948400E-016, 3.500000000000003100, 0.9732375295356801000 ) ) ; +#170 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#171 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#172 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.445493555586548200, 0.0000000000000000000 ) ) ; +#173 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ; +#174 = DIRECTION ( 'NONE', ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#175 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.500000000000003100, -0.9732375295356801000 ) ) ; +#176 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#177 = CARTESIAN_POINT ( 'NONE', ( 2.449293598294705900E-016, 0.0000000000000000000, 1.999999999999999600 ) ) ; +#178 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#179 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#180 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#181 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#182 = LINE ( 'NONE', #177, #29 ) ; +#183 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.500000000000003100, 0.0000000000000000000 ) ) ; +#184 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#185 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#186 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ; +#187 = ORIENTED_EDGE ( 'NONE', *, *, #294, .T. ) ; +#188 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605147900E-016, 3.500000000000003100, 7.500000000000000000 ) ) ; +#189 = CARTESIAN_POINT ( 'NONE', ( 2.449293598294706400E-016, 9.445493555586548200, 2.000000000000000000 ) ) ; +#190 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.945493555586548200, -1.999999999999999100 ) ) ; +#191 = CARTESIAN_POINT ( 'NONE', ( 9.184850993605147900E-016, 0.0000000000000000000, 7.500000000000000000 ) ) ; +#192 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -7.500000000000000000 ) ) ; +#193 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.445493555586548200, -2.000000000000000000 ) ) ; +#194 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 9.445493555586548200, -1.500000000000000000 ) ) ; +#195 = CARTESIAN_POINT ( 'NONE', ( 1.836970198721029900E-016, 0.0000000000000000000, 1.500000000000000000 ) ) ; +#196 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 3.500000000000003100, -7.500000000000000000 ) ) ; +#197 = CARTESIAN_POINT ( 'NONE', ( 1.836970198721029900E-016, 9.445493555586548200, 1.500000000000000000 ) ) ; +#198 = CARTESIAN_POINT ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.500000000000000000 ) ) ; +#199 = CARTESIAN_POINT ( 'NONE', ( 5.817072295949922500E-016, 9.945493555586548200, 1.999999999999999100 ) ) ; +#200 = ORIENTED_EDGE ( 'NONE', *, *, #291, .T. ) ; +#201 = ORIENTED_EDGE ( 'NONE', *, *, #294, .F. ) ; +#202 = ORIENTED_EDGE ( 'NONE', *, *, #292, .T. ) ; +#203 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#204 = ORIENTED_EDGE ( 'NONE', *, *, #296, .F. ) ; +#205 = DIRECTION ( 'NONE', ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ; +#206 = ORIENTED_EDGE ( 'NONE', *, *, #299, .T. ) ; +#207 = ORIENTED_EDGE ( 'NONE', *, *, #287, .T. ) ; +#208 = ORIENTED_EDGE ( 'NONE', *, *, #293, .F. ) ; +#209 = VERTEX_POINT ( 'NONE', #198 ) ; +#210 = ORIENTED_EDGE ( 'NONE', *, *, #289, .F. ) ; +#211 = ORIENTED_EDGE ( 'NONE', *, *, #293, .T. ) ; +#212 = VERTEX_POINT ( 'NONE', #197 ) ; +#213 = VERTEX_POINT ( 'NONE', #194 ) ; +#214 = VERTEX_POINT ( 'NONE', #195 ) ; +#215 = VERTEX_POINT ( 'NONE', #196 ) ; +#216 = VERTEX_POINT ( 'NONE', #191 ) ; +#217 = VERTEX_POINT ( 'NONE', #192 ) ; +#218 = VERTEX_POINT ( 'NONE', #193 ) ; +#219 = VERTEX_POINT ( 'NONE', #188 ) ; +#220 = VERTEX_POINT ( 'NONE', #189 ) ; +#221 = DIRECTION ( 'NONE', ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ; +#222 = ORIENTED_EDGE ( 'NONE', *, *, #286, .F. ) ; +#223 = EDGE_LOOP ( 'NONE', ( #60, #161, #68, #57 ) ) ; +#224 = EDGE_LOOP ( 'NONE', ( #245, #62, #59, #244 ) ) ; +#225 = EDGE_LOOP ( 'NONE', ( #142, #65, #63, #247 ) ) ; +#226 = EDGE_LOOP ( 'NONE', ( #250, #252, #246, #66 ) ) ; +#227 = EDGE_LOOP ( 'NONE', ( #187, #64 ) ) ; +#228 = EDGE_LOOP ( 'NONE', ( #238, #240, #237, #241 ) ) ; +#229 = EDGE_LOOP ( 'NONE', ( #208, #242, #248, #78 ) ) ; +#230 = EDGE_LOOP ( 'NONE', ( #206, #211 ) ) ; +#231 = EDGE_LOOP ( 'NONE', ( #210, #222 ) ) ; +#232 = EDGE_LOOP ( 'NONE', ( #200, #202, #201, #204 ) ) ; +#233 = ORIENTED_EDGE ( 'NONE', *, *, #290, .F. ) ; +#234 = EDGE_LOOP ( 'NONE', ( #239, #233, #207, #236 ) ) ; +#235 = EDGE_LOOP ( 'NONE', ( #249, #251 ) ) ; +#236 = ORIENTED_EDGE ( 'NONE', *, *, #289, .T. ) ; +#237 = ORIENTED_EDGE ( 'NONE', *, *, #266, .T. ) ; +#238 = ORIENTED_EDGE ( 'NONE', *, *, #288, .F. ) ; +#239 = ORIENTED_EDGE ( 'NONE', *, *, #265, .F. ) ; +#240 = ORIENTED_EDGE ( 'NONE', *, *, #300, .T. ) ; +#241 = ORIENTED_EDGE ( 'NONE', *, *, #261, .F. ) ; +#242 = ORIENTED_EDGE ( 'NONE', *, *, #295, .T. ) ; +#243 = VERTEX_POINT ( 'NONE', #190 ) ; +#244 = ORIENTED_EDGE ( 'NONE', *, *, #266, .F. ) ; +#245 = ORIENTED_EDGE ( 'NONE', *, *, #290, .T. ) ; +#246 = ORIENTED_EDGE ( 'NONE', *, *, #286, .T. ) ; +#247 = ORIENTED_EDGE ( 'NONE', *, *, #302, .T. ) ; +#248 = ORIENTED_EDGE ( 'NONE', *, *, #303, .T. ) ; +#249 = ORIENTED_EDGE ( 'NONE', *, *, #302, .F. ) ; +#250 = ORIENTED_EDGE ( 'NONE', *, *, #300, .F. ) ; +#251 = ORIENTED_EDGE ( 'NONE', *, *, #303, .F. ) ; +#252 = ORIENTED_EDGE ( 'NONE', *, *, #265, .T. ) ; +#253 = PRODUCT ( 'nose', 'nose', '', ( #89 ) ) ; +#254 = ADVANCED_FACE ( 'NONE', ( #26 ), #18, .F. ) ; +#255 = ADVANCED_FACE ( 'NONE', ( #40 ), #284, .T. ) ; +#256 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #309, #310 ) ; +#257 = ADVANCED_FACE ( 'NONE', ( #16 ), #50, .F. ) ; +#258 = ADVANCED_FACE ( 'NONE', ( #17 ), #47, .F. ) ; +#259 = ADVANCED_FACE ( 'NONE', ( #49 ), #44, .T. ) ; +#260 = ADVANCED_FACE ( 'NONE', ( #46, #42 ), #76, .T. ) ; +#261 = EDGE_CURVE ( 'NONE', #219, #215, #285, .T. ) ; +#262 = ADVANCED_FACE ( 'NONE', ( #53 ), #281, .T. ) ; +#263 = ADVANCED_FACE ( 'NONE', ( #43 ), #34, .T. ) ; +#264 = ADVANCED_FACE ( 'NONE', ( #37 ), #31, .F. ) ; +#265 = EDGE_CURVE ( 'NONE', #77, #220, #182, .T. ) ; +#266 = EDGE_CURVE ( 'NONE', #243, #215, #283, .T. ) ; +#267 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #253 ) ) ; +#268 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#269 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ; +#270 = CIRCLE ( 'NONE', #5, 1.500000000000000000 ) ; +#271 = CIRCLE ( 'NONE', #6, 1.500000000000000000 ) ; +#272 = CIRCLE ( 'NONE', #21, 1.999999999999999100 ) ; +#273 = CIRCLE ( 'NONE', #20, 1.500000000000000000 ) ; +#274 = CIRCLE ( 'NONE', #13, 7.500000000000000000 ) ; +#275 = CIRCLE ( 'NONE', #11, 7.500000000000000000 ) ; +#276 = CIRCLE ( 'NONE', #19, 1.500000000000000000 ) ; +#277 = CIRCLE ( 'NONE', #33, 7.500000000000000000 ) ; +#278 = CIRCLE ( 'NONE', #30, 1.999999999999999100 ) ; +#279 = CIRCLE ( 'NONE', #22, 2.000000000000000000 ) ; +#280 = CIRCLE ( 'NONE', #27, 6.526762470464319700 ) ; +#281 = TOROIDAL_SURFACE ( 'NONE', #41, 0.9732375295356801000, 6.526762470464319700 ) ; +#282 = CIRCLE ( 'NONE', #28, 2.000000000000000000 ) ; +#283 = CIRCLE ( 'NONE', #36, 6.526762470464319700 ) ; +#284 = TOROIDAL_SURFACE ( 'NONE', #52, 0.9732375295356801000, 6.526762470464319700 ) ; +#285 = CIRCLE ( 'NONE', #39, 7.500000000000000000 ) ; +#286 = EDGE_CURVE ( 'NONE', #220, #218, #282, .T. ) ; +#287 = EDGE_CURVE ( 'NONE', #243, #218, #168, .T. ) ; +#288 = EDGE_CURVE ( 'NONE', #77, #219, #280, .T. ) ; +#289 = EDGE_CURVE ( 'NONE', #218, #220, #279, .T. ) ; +#290 = EDGE_CURVE ( 'NONE', #243, #77, #278, .T. ) ; +#291 = EDGE_CURVE ( 'NONE', #215, #219, #277, .T. ) ; +#292 = EDGE_CURVE ( 'NONE', #219, #216, #152, .T. ) ; +#293 = EDGE_CURVE ( 'NONE', #212, #213, #276, .T. ) ; +#294 = EDGE_CURVE ( 'NONE', #217, #216, #275, .T. ) ; +#295 = EDGE_CURVE ( 'NONE', #212, #214, #143, .T. ) ; +#296 = EDGE_CURVE ( 'NONE', #215, #217, #139, .T. ) ; +#297 = EDGE_CURVE ( 'NONE', #213, #209, #136, .T. ) ; +#298 = EDGE_CURVE ( 'NONE', #216, #217, #274, .T. ) ; +#299 = EDGE_CURVE ( 'NONE', #213, #212, #273, .T. ) ; +#300 = EDGE_CURVE ( 'NONE', #77, #243, #272, .T. ) ; +#301 = ADVANCED_FACE ( 'NONE', ( #15, #10 ), #125, .T. ) ; +#302 = EDGE_CURVE ( 'NONE', #209, #214, #270, .T. ) ; +#303 = EDGE_CURVE ( 'NONE', #214, #209, #271, .T. ) ; +#304 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#305 = APPLICATION_CONTEXT ( 'automotive_design' ) ; +#306 = AXIS2_PLACEMENT_3D ( 'NONE', #93, #92, #91 ) ; +#307 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION ( '', ( #9 ), #56 ) ; +#308 = PRESENTATION_LAYER_ASSIGNMENT ( '', '', ( #9 ) ) ; +#309 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #253, .NOT_KNOWN. ) ; +#310 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #305, 'design' ) ; +#311 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE', #256 ) ; +#312 = MANIFOLD_SOLID_BREP ( 'Revolve1', #24 ) ; +#313 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #109, 'distance_accuracy_value', 'NONE'); +#314 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'nose', ( #312, #306 ), #55 ) ; +#315 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #96, 'distance_accuracy_value', 'NONE'); +#316 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #106, 'distance_accuracy_value', 'NONE'); +ENDSEC; +END-ISO-10303-21; diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STL/base.stl b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STL/base.stl new file mode 100644 index 0000000..69a8a77 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STL/base.stl differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STL/fuse.stl b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STL/fuse.stl new file mode 100644 index 0000000..94b4ed6 Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STL/fuse.stl differ diff --git a/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STL/nose.stl b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STL/nose.stl new file mode 100644 index 0000000..f3a0e9a Binary files /dev/null and b/Grenades/Aleppo_Rifle_Grenade_v0.1-Anonymous/STL/nose.stl differ