Adding PM422 Songbird Single Shot Pistol by patrickiv.

Firearms/PM422_Songbird_22lr_Pistol-JamesRPatrick/README.md

@@ -0,0 +1,81 @@
+# PM422 Songbird .22LR Pistol
+
+#### Author
+JamesRPatrick
+
+#### Version
+1.8
+
+#### Release Date
+2015/06/12
+
+#### Description
+This is a single-shot, single-action 3d-printed pistol chambered in .22LR.  It operates under a principle wherein the frame holds the barrel in compression axially and prevents the barrel layers from separating.  This allows the barrel to be smaller in diameter than previous, unsupported designs.  100% printed barrels are not intended to have a long service life.
+
+Special thanks to FP of FOSSCAD for printing and test firing this design.
+
+#### Test Record
+Version 1.7 was printed with 100% infill in ABS on a Rostock Max. The 100% printed barrel withstood 3 rounds without rupturing. The casing became stuck in the barrel and testing could not be continued on the firearm as designed. A printed barrel with a chamber insert lasted 15 rounds before cracking between layers, just forward of the insert, without harm to the operator. Two more 100% printed barrels were made and had a very short service life. A rifled barrel insert was used in a printed barrel that was modified by FP. This lasted many rounds and is still in service.
+
+#### Printing
+
+* Requires a print bed of at least 11" diameter or at least 10" x 6" rectangular area.
+* All printed parts are to be printed in ABS, 100% infill, with maximum shells.
+* Use plenty of support material.
+* Print frame on its right side.
+* Print barrel standing on it rear end. 
+* For a long service life, print "barrel short barrel insert_FP" and install a 2.5" rifled steel barrel insert using high-strength epoxy.
+* Print barrel catch on its front face.
+* Print trigger and hammer on their right sides.
+* Print pins standing upright. 
+
+#### Finishing
+* Install the legally required amount of metal in the grip using high-strength epoxy. Use acetone or epoxy to secure the Frame Cap.
+* Fit barrel to frame by sanding the front or rear end. With a round in the chamber, the barrel should be tight enough in the frame that it will not fall out even with no barrel catch.
+* Use a 2mm, a 3mm, and an 8mm drill bit to ream appropriate holes.
+* Use 1.75mm filament to secure the Hammer Pin and the Firing Pin Retainer. 
+* Use a 1", 12 Gauge roofing nail with 0.281" head. Grind tip flat for 0.040" MAX protrusion. 12 gauge is 2.680mm diameter.
+* Acetone polish frame and outside of barrel. Other parts optional. 
+* Use rubber bands or condoms to power the hammer, trigger, and barrel catch.
+
+#### Changes
+
+Changes from 1.0:
+-Barrel and frame have been shortened by 10mm.
+
+Changes from 1.1:
+-Barrel and frame have been shortened by another 10mm.
+
+Changes from 1.2:
+-Fixed issue with bore in frame.
+
+Changes from 1.3:
+-Moved spacer from right side of hammer to right inside wall of frame.
+
+Changes from 1.4:
+-Added frame cap.
+
+Changes from 1.5:
+-Enlarged bore.
+
+Changes from 1.6:
+-Extended trigger pin and hammer pin.
+
+Changes from 1.7:
+-Added "barrel short barrel insert" by FP.
+
+Planned changes for 2.0:
+-Eliminate need to cut and tie rubber bands.
+-Print frame in two halves and solvent weld, with alignment pegs.
+-Modify hole for barrel catch for no support.
+-Add drop safety.
+-Cut weight cavity from left side to eliminate support in handle.
+-Add recess in cavity to prevent overinsertion of frame cap.
+-Make hammer and trigger easier to print.
+-Eliminate filament hole in firing pin retainer.
+
+#### DISCLAIMER
+
+Use this information at your own risk and responsibility. 
+
+jamesrpatrick.com 2015

Firearms/PM422_Songbird_22lr_Pistol-JamesRPatrick/STEP/PM422FiringPinRetainer1.stp

@@ -0,0 +1,519 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM422\\PM422FiringPinRetainer1.stp','2015-05-10T23:35:01',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM422FiringPinRetainer1','PM422FiringPinRetainer1',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(-8.000000000000004,14.000000000000002,0.0));
+#69=DIRECTION('',(1.0,0.0,0.0));
+#70=DIRECTION('',(0.0,0.0,-1.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=PLANE('',#71);
+#73=CARTESIAN_POINT('',(-8.000000000000005,12.000000000000002,-9.772983346207418));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(-8.000000000000004,14.000000000000002,-9.772983346207418));
+#76=VERTEX_POINT('',#75);
+#77=CARTESIAN_POINT('',(-8.000000000000005,12.000000000000002,-9.772983346207418));
+#78=DIRECTION('',(0.0,1.0,0.0));
+#79=VECTOR('',#78,2.0);
+#80=LINE('',#77,#79);
+#81=EDGE_CURVE('',#74,#76,#80,.T.);
+#82=ORIENTED_EDGE('',*,*,#81,.F.);
+#83=CARTESIAN_POINT('',(-8.000000000000005,12.000000000000002,9.772983346207418));
+#84=VERTEX_POINT('',#83);
+#85=CARTESIAN_POINT('',(-8.000000000000005,12.000000000000002,-9.772983346207418));
+#86=DIRECTION('',(0.0,0.0,1.0));
+#87=VECTOR('',#86,19.545966692414837);
+#88=LINE('',#85,#87);
+#89=EDGE_CURVE('',#74,#84,#88,.T.);
+#90=ORIENTED_EDGE('',*,*,#89,.T.);
+#91=CARTESIAN_POINT('',(-8.000000000000004,14.000000000000002,9.772983346207418));
+#92=VERTEX_POINT('',#91);
+#93=CARTESIAN_POINT('',(-8.000000000000004,14.000000000000002,9.772983346207418));
+#94=DIRECTION('',(0.0,-1.0,0.0));
+#95=VECTOR('',#94,2.0);
+#96=LINE('',#93,#95);
+#97=EDGE_CURVE('',#92,#84,#96,.T.);
+#98=ORIENTED_EDGE('',*,*,#97,.F.);
+#99=CARTESIAN_POINT('',(-8.000000000000005,14.000000000000002,-9.772983346207418));
+#100=DIRECTION('',(0.0,0.0,1.0));
+#101=VECTOR('',#100,19.545966692414837);
+#102=LINE('',#99,#101);
+#103=EDGE_CURVE('',#76,#92,#102,.T.);
+#104=ORIENTED_EDGE('',*,*,#103,.F.);
+#105=EDGE_LOOP('',(#82,#90,#98,#104));
+#106=FACE_OUTER_BOUND('',#105,.T.);
+#107=ADVANCED_FACE('',(#106),#72,.F.);
+#108=CARTESIAN_POINT('',(-8.000000000000005,12.000000000000002,0.0));
+#109=DIRECTION('',(0.0,-1.0,0.0));
+#110=DIRECTION('',(0.0,0.0,-1.0));
+#111=AXIS2_PLACEMENT_3D('',#108,#109,#110);
+#112=PLANE('',#111);
+#113=CARTESIAN_POINT('',(-11.000000000000005,12.000000000000002,-5.9));
+#114=VERTEX_POINT('',#113);
+#115=CARTESIAN_POINT('',(-7.000000000000004,12.000000000000002,-5.9));
+#116=DIRECTION('',(-5.551115E-016,-1.0,-5.551115E-016));
+#117=DIRECTION('',(-0.707106781186548,7.850462E-016,-0.707106781186547));
+#118=AXIS2_PLACEMENT_3D('',#115,#116,#117);
+#119=CIRCLE('',#118,4.0);
+#120=EDGE_CURVE('',#114,#74,#119,.T.);
+#121=ORIENTED_EDGE('',*,*,#120,.F.);
+#122=CARTESIAN_POINT('',(-11.000000000000005,12.000000000000002,5.9));
+#123=VERTEX_POINT('',#122);
+#124=CARTESIAN_POINT('',(-11.000000000000005,12.000000000000002,5.9));
+#125=DIRECTION('',(0.0,0.0,-1.0));
+#126=VECTOR('',#125,11.800000000000001);
+#127=LINE('',#124,#126);
+#128=EDGE_CURVE('',#123,#114,#127,.T.);
+#129=ORIENTED_EDGE('',*,*,#128,.F.);
+#130=CARTESIAN_POINT('',(-7.000000000000004,12.000000000000002,5.9));
+#131=DIRECTION('',(-5.551115E-016,-1.0,5.551115E-016));
+#132=DIRECTION('',(-0.707106781186548,7.850462E-016,0.707106781186547));
+#133=AXIS2_PLACEMENT_3D('',#130,#131,#132);
+#134=CIRCLE('',#133,4.0);
+#135=EDGE_CURVE('',#84,#123,#134,.T.);
+#136=ORIENTED_EDGE('',*,*,#135,.F.);
+#137=ORIENTED_EDGE('',*,*,#89,.F.);
+#138=EDGE_LOOP('',(#121,#129,#136,#137));
+#139=FACE_OUTER_BOUND('',#138,.T.);
+#140=ADVANCED_FACE('',(#139),#112,.F.);
+#141=CARTESIAN_POINT('',(-11.000000000000004,14.0,0.0));
+#142=DIRECTION('',(0.0,1.0,0.0));
+#143=DIRECTION('',(0.0,0.0,1.0));
+#144=AXIS2_PLACEMENT_3D('',#141,#142,#143);
+#145=PLANE('',#144);
+#146=ORIENTED_EDGE('',*,*,#103,.T.);
+#147=CARTESIAN_POINT('',(-7.000000000000002,14.000000000000002,9.9));
+#148=VERTEX_POINT('',#147);
+#149=CARTESIAN_POINT('',(-7.000000000000003,13.999999999999995,5.9));
+#150=DIRECTION('',(-5.551115E-016,-1.0,5.551115E-016));
+#151=DIRECTION('',(-0.707106781186548,7.850462E-016,0.707106781186547));
+#152=AXIS2_PLACEMENT_3D('',#149,#150,#151);
+#153=CIRCLE('',#152,4.0);
+#154=EDGE_CURVE('',#148,#92,#153,.T.);
+#155=ORIENTED_EDGE('',*,*,#154,.F.);
+#156=CARTESIAN_POINT('',(-4.000000000000003,14.000000000000004,9.9));
+#157=VERTEX_POINT('',#156);
+#158=CARTESIAN_POINT('',(-7.000000000000002,14.000000000000002,9.9));
+#159=DIRECTION('',(1.0,0.0,0.0));
+#160=VECTOR('',#159,2.999999999999999);
+#161=LINE('',#158,#160);
+#162=EDGE_CURVE('',#148,#157,#161,.T.);
+#163=ORIENTED_EDGE('',*,*,#162,.T.);
+#164=CARTESIAN_POINT('',(-4.000000000000003,14.000000000000004,-9.9));
+#165=VERTEX_POINT('',#164);
+#166=CARTESIAN_POINT('',(-4.000000000000003,14.000000000000004,-9.9));
+#167=DIRECTION('',(0.0,0.0,1.0));
+#168=VECTOR('',#167,19.800000000000001);
+#169=LINE('',#166,#168);
+#170=EDGE_CURVE('',#165,#157,#169,.T.);
+#171=ORIENTED_EDGE('',*,*,#170,.F.);
+#172=CARTESIAN_POINT('',(-7.000000000000002,14.000000000000002,-9.9));
+#173=VERTEX_POINT('',#172);
+#174=CARTESIAN_POINT('',(-4.000000000000002,14.000000000000005,-9.9));
+#175=DIRECTION('',(-1.0,0.0,0.0));
+#176=VECTOR('',#175,3.0);
+#177=LINE('',#174,#176);
+#178=EDGE_CURVE('',#165,#173,#177,.T.);
+#179=ORIENTED_EDGE('',*,*,#178,.T.);
+#180=CARTESIAN_POINT('',(-7.000000000000003,13.999999999999995,-5.9));
+#181=DIRECTION('',(-5.551115E-016,-1.0,-5.551115E-016));
+#182=DIRECTION('',(-0.707106781186548,7.850462E-016,-0.707106781186547));
+#183=AXIS2_PLACEMENT_3D('',#180,#181,#182);
+#184=CIRCLE('',#183,4.0);
+#185=EDGE_CURVE('',#76,#173,#184,.T.);
+#186=ORIENTED_EDGE('',*,*,#185,.F.);
+#187=EDGE_LOOP('',(#146,#155,#163,#171,#179,#186));
+#188=FACE_OUTER_BOUND('',#187,.T.);
+#189=ADVANCED_FACE('',(#188),#145,.T.);
+#190=CARTESIAN_POINT('',(-7.000000000000004,12.499999999999998,5.9));
+#191=DIRECTION('',(1.110223E-015,1.0,0.0));
+#192=DIRECTION('',(-0.707106781186548,7.850462E-016,0.707106781186547));
+#193=AXIS2_PLACEMENT_3D('',#190,#191,#192);
+#194=CYLINDRICAL_SURFACE('',#193,4.0);
+#195=ORIENTED_EDGE('',*,*,#97,.T.);
+#196=ORIENTED_EDGE('',*,*,#135,.T.);
+#197=CARTESIAN_POINT('',(-11.0,-6.000000000000007,5.9));
+#198=VERTEX_POINT('',#197);
+#199=CARTESIAN_POINT('',(-11.000000000000005,12.000000000000002,5.9));
+#200=DIRECTION('',(0.0,-1.0,0.0));
+#201=VECTOR('',#200,18.000000000000011);
+#202=LINE('',#199,#201);
+#203=EDGE_CURVE('',#123,#198,#202,.T.);
+#204=ORIENTED_EDGE('',*,*,#203,.T.);
+#205=CARTESIAN_POINT('',(-6.999999999999998,-6.000000000000005,9.9));
+#206=VERTEX_POINT('',#205);
+#207=CARTESIAN_POINT('',(-7.000000000000025,-6.000000000000005,5.9));
+#208=DIRECTION('',(5.551115E-016,1.0,-5.551115E-016));
+#209=DIRECTION('',(-0.707106781186548,7.850462E-016,0.707106781186547));
+#210=AXIS2_PLACEMENT_3D('',#207,#208,#209);
+#211=CIRCLE('',#210,4.0);
+#212=EDGE_CURVE('',#198,#206,#211,.T.);
+#213=ORIENTED_EDGE('',*,*,#212,.T.);
+#214=CARTESIAN_POINT('',(-6.999999999999997,-4.36606229914325,9.9));
+#215=VERTEX_POINT('',#214);
+#216=CARTESIAN_POINT('',(-6.999999999999997,-4.36606229914325,9.9));
+#217=DIRECTION('',(0.0,-1.0,0.0));
+#218=VECTOR('',#217,1.633937700856755);
+#219=LINE('',#216,#218);
+#220=EDGE_CURVE('',#215,#206,#219,.T.);
+#221=ORIENTED_EDGE('',*,*,#220,.F.);
+#222=CARTESIAN_POINT('',(-7.000000000000012,4.366062299143227,9.9));
+#223=VERTEX_POINT('',#222);
+#224=CARTESIAN_POINT('',(-6.999999999999997,-4.36606229914325,9.9));
+#225=CARTESIAN_POINT('',(-7.289198371474699,-3.902397682923697,9.900000000000002));
+#226=CARTESIAN_POINT('',(-7.537231438406149,-3.40046987981775,9.868687716049882));
+#227=CARTESIAN_POINT('',(-8.079316754573933,-1.944282589755841,9.767834538750725));
+#228=CARTESIAN_POINT('',(-8.250000000000002,-0.941082081130264,9.699671038392673));
+#229=CARTESIAN_POINT('',(-8.25,0.941082081130282,9.699671038392673));
+#230=CARTESIAN_POINT('',(-8.079316754573929,1.94428258975586,9.767834538750725));
+#231=CARTESIAN_POINT('',(-7.537231438406147,3.400469879817753,9.86868771604988));
+#232=CARTESIAN_POINT('',(-7.289198371474704,3.902397682923686,9.9));
+#233=CARTESIAN_POINT('',(-7.000000000000012,4.366062299143226,9.9));
+#234=B_SPLINE_CURVE_WITH_KNOTS('',3,(#224,#225,#226,#227,#228,#229,#230,#231,#232,#233),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,4),(1.884069878987488,2.041945119530863,2.324269743869944,2.606594368209026,2.764469608752396),.UNSPECIFIED.);
+#235=EDGE_CURVE('',#215,#223,#234,.T.);
+#236=ORIENTED_EDGE('',*,*,#235,.T.);
+#237=CARTESIAN_POINT('',(-7.00000000000001,7.125,9.9));
+#238=VERTEX_POINT('',#237);
+#239=CARTESIAN_POINT('',(-7.000000000000012,4.366062299143229,9.9));
+#240=DIRECTION('',(0.0,1.0,0.0));
+#241=VECTOR('',#240,2.758937700856772);
+#242=LINE('',#239,#241);
+#243=EDGE_CURVE('',#223,#238,#242,.T.);
+#244=ORIENTED_EDGE('',*,*,#243,.T.);
+#245=CARTESIAN_POINT('',(-7.000000000000007,8.875,9.9));
+#246=VERTEX_POINT('',#245);
+#247=CARTESIAN_POINT('',(-7.000000000000001,7.125,9.9));
+#248=CARTESIAN_POINT('',(-7.11024710492001,7.125,9.9));
+#249=CARTESIAN_POINT('',(-7.227602063303,7.147105708423652,9.894982771045772));
+#250=CARTESIAN_POINT('',(-7.443081792234843,7.236514643745776,9.876854104224629));
+#251=CARTESIAN_POINT('',(-7.541235333421861,7.303798466345404,9.863989796555403));
+#252=CARTESIAN_POINT('',(-7.6962077948332,7.458770927756744,9.839726702938652));
+#253=CARTESIAN_POINT('',(-7.763486720346608,7.5569218279538,9.82672527513537));
+#254=CARTESIAN_POINT('',(-7.852892096262691,7.77239231322945,9.808280756848077));
+#255=CARTESIAN_POINT('',(-7.875,7.889743986339721,9.803123748999001));
+#256=CARTESIAN_POINT('',(-7.875,8.110256013660282,9.803123748999001));
+#257=CARTESIAN_POINT('',(-7.852892096262691,8.227607686770554,9.808280756848077));
+#258=CARTESIAN_POINT('',(-7.763486720346606,8.443078172046205,9.82672527513537));
+#259=CARTESIAN_POINT('',(-7.696207794833199,8.54122907224326,9.839726702938652));
+#260=CARTESIAN_POINT('',(-7.541235333421859,8.6962015336546,9.863989796555403));
+#261=CARTESIAN_POINT('',(-7.443081792234841,8.763485356254229,9.876854104224629));
+#262=CARTESIAN_POINT('',(-7.227602063302997,8.852894291576352,9.894982771045772));
+#263=CARTESIAN_POINT('',(-7.110247104920008,8.875,9.9));
+#264=CARTESIAN_POINT('',(-6.999999999999998,8.875,9.9));
+#265=B_SPLINE_CURVE_WITH_KNOTS('',3,(#247,#248,#249,#250,#251,#252,#253,#254,#255,#256,#257,#258,#259,#260,#261,#262,#263,#264),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,2,2,2,2,4),(0.132301871148174,0.165376002624177,0.19845013410018,0.231526938198264,0.264603742296348,0.297680546394433,0.330757350492517,0.36383148196852,0.396905613444523),.UNSPECIFIED.);
+#266=EDGE_CURVE('',#238,#246,#265,.T.);
+#267=ORIENTED_EDGE('',*,*,#266,.T.);
+#268=CARTESIAN_POINT('',(-7.000000000000008,8.875,9.9));
+#269=DIRECTION('',(0.0,1.0,0.0));
+#270=VECTOR('',#269,5.125000000000002);
+#271=LINE('',#268,#270);
+#272=EDGE_CURVE('',#246,#148,#271,.T.);
+#273=ORIENTED_EDGE('',*,*,#272,.T.);
+#274=ORIENTED_EDGE('',*,*,#154,.T.);
+#275=EDGE_LOOP('',(#195,#196,#204,#213,#221,#236,#244,#267,#273,#274));
+#276=FACE_OUTER_BOUND('',#275,.T.);
+#277=ADVANCED_FACE('',(#276),#194,.T.);
+#278=CARTESIAN_POINT('',(-7.000000000000004,12.499999999999998,-5.9));
+#279=DIRECTION('',(-1.110223E-015,-1.0,0.0));
+#280=DIRECTION('',(-0.707106781186548,7.850462E-016,-0.707106781186547));
+#281=AXIS2_PLACEMENT_3D('',#278,#279,#280);
+#282=CYLINDRICAL_SURFACE('',#281,4.0);
+#283=ORIENTED_EDGE('',*,*,#81,.T.);
+#284=ORIENTED_EDGE('',*,*,#185,.T.);
+#285=CARTESIAN_POINT('',(-7.000000000000007,8.875,-9.9));
+#286=VERTEX_POINT('',#285);
+#287=CARTESIAN_POINT('',(-7.000000000000002,14.000000000000002,-9.9));
+#288=DIRECTION('',(0.0,-1.0,0.0));
+#289=VECTOR('',#288,5.125000000000002);
+#290=LINE('',#287,#289);
+#291=EDGE_CURVE('',#173,#286,#290,.T.);
+#292=ORIENTED_EDGE('',*,*,#291,.T.);
+#293=CARTESIAN_POINT('',(-7.00000000000001,7.125,-9.9));
+#294=VERTEX_POINT('',#293);
+#295=CARTESIAN_POINT('',(-6.999999999999996,8.875,-9.9));
+#296=CARTESIAN_POINT('',(-7.110247104920006,8.875,-9.9));
+#297=CARTESIAN_POINT('',(-7.227602063302997,8.852894291576352,-9.894982771045772));
+#298=CARTESIAN_POINT('',(-7.443081792234841,8.763485356254229,-9.876854104224629));
+#299=CARTESIAN_POINT('',(-7.541235333421859,8.6962015336546,-9.863989796555403));
+#300=CARTESIAN_POINT('',(-7.696207794833199,8.54122907224326,-9.839726702938652));
+#301=CARTESIAN_POINT('',(-7.763486720346606,8.443078172046205,-9.82672527513537));
+#302=CARTESIAN_POINT('',(-7.852892096262691,8.227607686770554,-9.808280756848077));
+#303=CARTESIAN_POINT('',(-7.875,8.110256013660282,-9.803123748999001));
+#304=CARTESIAN_POINT('',(-7.875,8.000000000000002,-9.803123748999001));
+#305=CARTESIAN_POINT('',(-7.875,7.889743986339721,-9.803123748999001));
+#306=CARTESIAN_POINT('',(-7.852892096262691,7.77239231322945,-9.808280756848077));
+#307=CARTESIAN_POINT('',(-7.763486720346608,7.5569218279538,-9.82672527513537));
+#308=CARTESIAN_POINT('',(-7.6962077948332,7.458770927756744,-9.839726702938652));
+#309=CARTESIAN_POINT('',(-7.541235333421861,7.303798466345404,-9.863989796555403));
+#310=CARTESIAN_POINT('',(-7.443081792234843,7.236514643745776,-9.876854104224629));
+#311=CARTESIAN_POINT('',(-7.227602063302999,7.147105708423652,-9.894982771045772));
+#312=CARTESIAN_POINT('',(-7.110247104920009,7.125,-9.9));
+#313=CARTESIAN_POINT('',(-7.0,7.125,-9.9));
+#314=B_SPLINE_CURVE_WITH_KNOTS('',3,(#295,#296,#297,#298,#299,#300,#301,#302,#303,#304,#305,#306,#307,#308,#309,#310,#311,#312,#313),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,3,2,2,2,4),(0.396905613444523,0.429979744920526,0.463053876396529,0.496130680494613,0.529207484592697,0.562284288690782,0.595361092788866,0.628435224264869,0.661509355740872),.UNSPECIFIED.);
+#315=EDGE_CURVE('',#286,#294,#314,.T.);
+#316=ORIENTED_EDGE('',*,*,#315,.T.);
+#317=CARTESIAN_POINT('',(-7.000000000000012,4.366062299143227,-9.9));
+#318=VERTEX_POINT('',#317);
+#319=CARTESIAN_POINT('',(-7.00000000000001,7.125000000000001,-9.9));
+#320=DIRECTION('',(0.0,-1.0,0.0));
+#321=VECTOR('',#320,2.758937700856772);
+#322=LINE('',#319,#321);
+#323=EDGE_CURVE('',#294,#318,#322,.T.);
+#324=ORIENTED_EDGE('',*,*,#323,.T.);
+#325=CARTESIAN_POINT('',(-6.999999999999997,-4.36606229914325,-9.9));
+#326=VERTEX_POINT('',#325);
+#327=CARTESIAN_POINT('',(-7.000000000000012,4.366062299143226,-9.9));
+#328=CARTESIAN_POINT('',(-7.289198371474704,3.902397682923685,-9.9));
+#329=CARTESIAN_POINT('',(-7.537231438406145,3.400469879817752,-9.86868771604988));
+#330=CARTESIAN_POINT('',(-8.079316754573929,1.94428258975586,-9.767834538750725));
+#331=CARTESIAN_POINT('',(-8.25,0.941082081130281,-9.699671038392673));
+#332=CARTESIAN_POINT('',(-8.250000000000002,-0.941082081130264,-9.699671038392673));
+#333=CARTESIAN_POINT('',(-8.079316754573933,-1.944282589755843,-9.767834538750725));
+#334=CARTESIAN_POINT('',(-7.537231438406147,-3.400469879817752,-9.868687716049882));
+#335=CARTESIAN_POINT('',(-7.289198371474699,-3.902397682923698,-9.900000000000004));
+#336=CARTESIAN_POINT('',(-6.999999999999997,-4.36606229914325,-9.9));
+#337=B_SPLINE_CURVE_WITH_KNOTS('',3,(#327,#328,#329,#330,#331,#332,#333,#334,#335,#336),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,4),(1.884069878987493,2.041945119530863,2.324269743869944,2.606594368209026,2.764469608752401),.UNSPECIFIED.);
+#338=EDGE_CURVE('',#318,#326,#337,.T.);
+#339=ORIENTED_EDGE('',*,*,#338,.T.);
+#340=CARTESIAN_POINT('',(-6.999999999999998,-6.000000000000005,-9.9));
+#341=VERTEX_POINT('',#340);
+#342=CARTESIAN_POINT('',(-6.999999999999998,-6.000000000000005,-9.9));
+#343=DIRECTION('',(0.0,1.0,0.0));
+#344=VECTOR('',#343,1.633937700856755);
+#345=LINE('',#342,#344);
+#346=EDGE_CURVE('',#341,#326,#345,.T.);
+#347=ORIENTED_EDGE('',*,*,#346,.F.);
+#348=CARTESIAN_POINT('',(-11.0,-6.000000000000007,-5.9));
+#349=VERTEX_POINT('',#348);
+#350=CARTESIAN_POINT('',(-7.000000000000025,-6.000000000000005,-5.9));
+#351=DIRECTION('',(5.551115E-016,1.0,5.551115E-016));
+#352=DIRECTION('',(-0.707106781186548,7.850462E-016,-0.707106781186547));
+#353=AXIS2_PLACEMENT_3D('',#350,#351,#352);
+#354=CIRCLE('',#353,4.0);
+#355=EDGE_CURVE('',#341,#349,#354,.T.);
+#356=ORIENTED_EDGE('',*,*,#355,.T.);
+#357=CARTESIAN_POINT('',(-11.000000000000027,-6.000000000000009,-5.9));
+#358=DIRECTION('',(0.0,1.0,0.0));
+#359=VECTOR('',#358,18.000000000000011);
+#360=LINE('',#357,#359);
+#361=EDGE_CURVE('',#349,#114,#360,.T.);
+#362=ORIENTED_EDGE('',*,*,#361,.T.);
+#363=ORIENTED_EDGE('',*,*,#120,.T.);
+#364=EDGE_LOOP('',(#283,#284,#292,#316,#324,#339,#347,#356,#362,#363));
+#365=FACE_OUTER_BOUND('',#364,.T.);
+#366=ADVANCED_FACE('',(#365),#282,.T.);
+#367=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#368=DIRECTION('',(0.0,0.0,1.0));
+#369=DIRECTION('',(-1.0,0.0,0.0));
+#370=AXIS2_PLACEMENT_3D('',#367,#368,#369);
+#371=CYLINDRICAL_SURFACE('',#370,8.25);
+#372=ORIENTED_EDGE('',*,*,#338,.F.);
+#373=CARTESIAN_POINT('',(-4.0,7.215434844830906,-9.9));
+#374=VERTEX_POINT('',#373);
+#375=CARTESIAN_POINT('',(0.0,0.0,-9.9));
+#376=DIRECTION('',(0.0,0.0,-1.0));
+#377=DIRECTION('',(-1.0,0.0,0.0));
+#378=AXIS2_PLACEMENT_3D('',#375,#376,#377);
+#379=CIRCLE('',#378,8.25);
+#380=EDGE_CURVE('',#318,#374,#379,.T.);
+#381=ORIENTED_EDGE('',*,*,#380,.T.);
+#382=CARTESIAN_POINT('',(-4.0,7.215434844830906,9.9));
+#383=VERTEX_POINT('',#382);
+#384=CARTESIAN_POINT('',(-4.0,7.215434844830906,-9.9));
+#385=DIRECTION('',(0.0,0.0,1.0));
+#386=VECTOR('',#385,19.800000000000001);
+#387=LINE('',#384,#386);
+#388=EDGE_CURVE('',#374,#383,#387,.T.);
+#389=ORIENTED_EDGE('',*,*,#388,.T.);
+#390=CARTESIAN_POINT('',(0.0,0.0,9.9));
+#391=DIRECTION('',(0.0,0.0,1.0));
+#392=DIRECTION('',(-1.0,0.0,0.0));
+#393=AXIS2_PLACEMENT_3D('',#390,#391,#392);
+#394=CIRCLE('',#393,8.25);
+#395=EDGE_CURVE('',#383,#223,#394,.T.);
+#396=ORIENTED_EDGE('',*,*,#395,.T.);
+#397=ORIENTED_EDGE('',*,*,#235,.F.);
+#398=CARTESIAN_POINT('',(-6.999999999999997,-4.36606229914325,-9.9));
+#399=DIRECTION('',(0.0,0.0,1.0));
+#400=VECTOR('',#399,19.800000000000001);
+#401=LINE('',#398,#400);
+#402=EDGE_CURVE('',#326,#215,#401,.T.);
+#403=ORIENTED_EDGE('',*,*,#402,.F.);
+#404=EDGE_LOOP('',(#372,#381,#389,#396,#397,#403));
+#405=FACE_OUTER_BOUND('',#404,.T.);
+#406=ADVANCED_FACE('',(#405),#371,.F.);
+#407=CARTESIAN_POINT('',(-9.500000000000004,13.0,-9.9));
+#408=DIRECTION('',(0.0,0.0,1.0));
+#409=DIRECTION('',(1.0,0.0,0.0));
+#410=AXIS2_PLACEMENT_3D('',#407,#408,#409);
+#411=PLANE('',#410);
+#412=ORIENTED_EDGE('',*,*,#323,.F.);
+#413=CARTESIAN_POINT('',(-6.999999999999998,8.0,-9.9));
+#414=DIRECTION('',(0.0,0.0,1.0));
+#415=DIRECTION('',(-1.0,0.0,0.0));
+#416=AXIS2_PLACEMENT_3D('',#413,#414,#415);
+#417=CIRCLE('',#416,0.875);
+#418=EDGE_CURVE('',#294,#286,#417,.T.);
+#419=ORIENTED_EDGE('',*,*,#418,.T.);
+#420=ORIENTED_EDGE('',*,*,#291,.F.);
+#421=ORIENTED_EDGE('',*,*,#178,.F.);
+#422=CARTESIAN_POINT('',(-4.0,7.215434844830906,-9.9));
+#423=DIRECTION('',(0.0,1.0,0.0));
+#424=VECTOR('',#423,6.784565155169098);
+#425=LINE('',#422,#424);
+#426=EDGE_CURVE('',#374,#165,#425,.T.);
+#427=ORIENTED_EDGE('',*,*,#426,.F.);
+#428=ORIENTED_EDGE('',*,*,#380,.F.);
+#429=EDGE_LOOP('',(#412,#419,#420,#421,#427,#428));
+#430=FACE_OUTER_BOUND('',#429,.T.);
+#431=ADVANCED_FACE('',(#430),#411,.F.);
+#432=CARTESIAN_POINT('',(-6.999999999999998,8.0,0.0));
+#433=DIRECTION('',(0.0,0.0,1.0));
+#434=DIRECTION('',(-1.0,0.0,0.0));
+#435=AXIS2_PLACEMENT_3D('',#432,#433,#434);
+#436=CYLINDRICAL_SURFACE('',#435,0.875);
+#437=ORIENTED_EDGE('',*,*,#315,.F.);
+#438=ORIENTED_EDGE('',*,*,#418,.F.);
+#439=EDGE_LOOP('',(#437,#438));
+#440=FACE_OUTER_BOUND('',#439,.T.);
+#441=ORIENTED_EDGE('',*,*,#266,.F.);
+#442=CARTESIAN_POINT('',(-6.999999999999998,8.0,9.9));
+#443=DIRECTION('',(0.0,0.0,-1.0));
+#444=DIRECTION('',(-1.0,0.0,0.0));
+#445=AXIS2_PLACEMENT_3D('',#442,#443,#444);
+#446=CIRCLE('',#445,0.875);
+#447=EDGE_CURVE('',#246,#238,#446,.T.);
+#448=ORIENTED_EDGE('',*,*,#447,.F.);
+#449=EDGE_LOOP('',(#441,#448));
+#450=FACE_BOUND('',#449,.T.);
+#451=ADVANCED_FACE('',(#440,#450),#436,.F.);
+#452=CARTESIAN_POINT('',(-9.500000000000004,13.0,9.9));
+#453=DIRECTION('',(0.0,0.0,1.0));
+#454=DIRECTION('',(1.0,0.0,0.0));
+#455=AXIS2_PLACEMENT_3D('',#452,#453,#454);
+#456=PLANE('',#455);
+#457=ORIENTED_EDGE('',*,*,#243,.F.);
+#458=ORIENTED_EDGE('',*,*,#395,.F.);
+#459=CARTESIAN_POINT('',(-4.000000000000002,14.000000000000004,9.9));
+#460=DIRECTION('',(0.0,-1.0,0.0));
+#461=VECTOR('',#460,6.784565155169098);
+#462=LINE('',#459,#461);
+#463=EDGE_CURVE('',#157,#383,#462,.T.);
+#464=ORIENTED_EDGE('',*,*,#463,.F.);
+#465=ORIENTED_EDGE('',*,*,#162,.F.);
+#466=ORIENTED_EDGE('',*,*,#272,.F.);
+#467=ORIENTED_EDGE('',*,*,#447,.T.);
+#468=EDGE_LOOP('',(#457,#458,#464,#465,#466,#467));
+#469=FACE_OUTER_BOUND('',#468,.T.);
+#470=ADVANCED_FACE('',(#469),#456,.T.);
+#471=CARTESIAN_POINT('',(-6.999999999999998,-6.000000000000005,0.0));
+#472=DIRECTION('',(0.0,-1.0,0.0));
+#473=DIRECTION('',(0.0,0.0,-1.0));
+#474=AXIS2_PLACEMENT_3D('',#471,#472,#473);
+#475=PLANE('',#474);
+#476=ORIENTED_EDGE('',*,*,#355,.F.);
+#477=CARTESIAN_POINT('',(-6.999999999999998,-6.000000000000005,-9.9));
+#478=DIRECTION('',(0.0,0.0,1.0));
+#479=VECTOR('',#478,19.800000000000001);
+#480=LINE('',#477,#479);
+#481=EDGE_CURVE('',#341,#206,#480,.T.);
+#482=ORIENTED_EDGE('',*,*,#481,.T.);
+#483=ORIENTED_EDGE('',*,*,#212,.F.);
+#484=CARTESIAN_POINT('',(-11.0,-6.000000000000007,-5.9));
+#485=DIRECTION('',(0.0,0.0,1.0));
+#486=VECTOR('',#485,11.800000000000001);
+#487=LINE('',#484,#486);
+#488=EDGE_CURVE('',#349,#198,#487,.T.);
+#489=ORIENTED_EDGE('',*,*,#488,.F.);
+#490=EDGE_LOOP('',(#476,#482,#483,#489));
+#491=FACE_OUTER_BOUND('',#490,.T.);
+#492=ADVANCED_FACE('',(#491),#475,.T.);
+#493=CARTESIAN_POINT('',(-4.000000000000003,14.000000000000004,0.0));
+#494=DIRECTION('',(1.0,0.0,0.0));
+#495=DIRECTION('',(0.0,0.0,-1.0));
+#496=AXIS2_PLACEMENT_3D('',#493,#494,#495);
+#497=PLANE('',#496);
+#498=ORIENTED_EDGE('',*,*,#463,.T.);
+#499=ORIENTED_EDGE('',*,*,#388,.F.);
+#500=ORIENTED_EDGE('',*,*,#426,.T.);
+#501=ORIENTED_EDGE('',*,*,#170,.T.);
+#502=EDGE_LOOP('',(#498,#499,#500,#501));
+#503=FACE_OUTER_BOUND('',#502,.T.);
+#504=ADVANCED_FACE('',(#503),#497,.T.);
+#505=CARTESIAN_POINT('',(-6.999999999999997,-4.36606229914325,0.0));
+#506=DIRECTION('',(1.0,0.0,0.0));
+#507=DIRECTION('',(0.0,0.0,-1.0));
+#508=AXIS2_PLACEMENT_3D('',#505,#506,#507);
+#509=PLANE('',#508);
+#510=ORIENTED_EDGE('',*,*,#220,.T.);
+#511=ORIENTED_EDGE('',*,*,#481,.F.);
+#512=ORIENTED_EDGE('',*,*,#346,.T.);
+#513=ORIENTED_EDGE('',*,*,#402,.T.);
+#514=EDGE_LOOP('',(#510,#511,#512,#513));
+#515=FACE_OUTER_BOUND('',#514,.T.);
+#516=ADVANCED_FACE('',(#515),#509,.T.);
+#517=CARTESIAN_POINT('',(-11.000000000000005,12.000000000000002,0.0));
+#518=DIRECTION('',(-1.0,0.0,0.0));
+#519=DIRECTION('',(0.0,0.0,1.0));
+#520=AXIS2_PLACEMENT_3D('',#517,#518,#519);
+#521=PLANE('',#520);
+#522=ORIENTED_EDGE('',*,*,#128,.T.);
+#523=ORIENTED_EDGE('',*,*,#361,.F.);
+#524=ORIENTED_EDGE('',*,*,#488,.T.);
+#525=ORIENTED_EDGE('',*,*,#203,.F.);
+#526=EDGE_LOOP('',(#522,#523,#524,#525));
+#527=FACE_OUTER_BOUND('',#526,.T.);
+#528=ADVANCED_FACE('',(#527),#521,.T.);
+#529=CLOSED_SHELL('',(#107,#140,#189,#277,#366,#406,#431,#451,#470,#492,#504,#516,#528));
+#530=MANIFOLD_SOLID_BREP('Solid1',#529);
+#531=COLOUR_RGB('Plastic (Black)',0.705882012844086,0.705882012844086,0.705882012844086);
+#532=FILL_AREA_STYLE_COLOUR('Plastic (Black)',#531);
+#533=FILL_AREA_STYLE('Plastic (Black)',(#532));
+#534=SURFACE_STYLE_FILL_AREA(#533);
+#535=SURFACE_SIDE_STYLE('Plastic (Black)',(#534));
+#536=SURFACE_STYLE_USAGE(.BOTH.,#535);
+#537=PRESENTATION_STYLE_ASSIGNMENT((#536));
+#538=STYLED_ITEM('',(#537),#530);
+#539=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#538),#36);
+#540=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#530),#36);
+#541=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#540,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM422_Songbird_22lr_Pistol-JamesRPatrick/STEP/PM422FrameCap1.stp

@@ -0,0 +1,425 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM422\\PM422FrameCap1.stp','2015-05-13T23:48:34',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM422FrameCap1','PM422FrameCap1',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(0.0,-195.81879199490868,-246.82107021414259));
+#69=DIRECTION('',(0.0,-0.438371146789078,0.898794046299167));
+#70=DIRECTION('',(1.0,0.0,0.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=PLANE('',#71);
+#73=CARTESIAN_POINT('',(-9.5,-134.55576379225374,-216.94109488547835));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(9.5,-134.55576379225374,-216.94109488547835));
+#76=VERTEX_POINT('',#75);
+#77=CARTESIAN_POINT('',(-9.5,-134.55576379225374,-216.94109488547832));
+#78=DIRECTION('',(1.0,0.0,0.0));
+#79=VECTOR('',#78,19.0);
+#80=LINE('',#77,#79);
+#81=EDGE_CURVE('',#74,#76,#80,.T.);
+#82=ORIENTED_EDGE('',*,*,#81,.T.);
+#83=CARTESIAN_POINT('',(9.5,-127.33068566691213,-213.41718882881486));
+#84=VERTEX_POINT('',#83);
+#85=CARTESIAN_POINT('',(9.5,-134.55576379225377,-216.94109488547832));
+#86=DIRECTION('',(0.0,0.898794046299167,0.438371146789078));
+#87=VECTOR('',#86,8.038635942339949);
+#88=LINE('',#85,#87);
+#89=EDGE_CURVE('',#76,#84,#88,.T.);
+#90=ORIENTED_EDGE('',*,*,#89,.T.);
+#91=CARTESIAN_POINT('',(-9.5,-127.33068566691213,-213.41718882881486));
+#92=VERTEX_POINT('',#91);
+#93=CARTESIAN_POINT('',(-9.5,-127.33068566691213,-213.41718882881486));
+#94=DIRECTION('',(1.0,0.0,0.0));
+#95=VECTOR('',#94,19.0);
+#96=LINE('',#93,#95);
+#97=EDGE_CURVE('',#92,#84,#96,.T.);
+#98=ORIENTED_EDGE('',*,*,#97,.F.);
+#99=CARTESIAN_POINT('',(-9.5,-127.33068566691213,-213.41718882881486));
+#100=DIRECTION('',(0.0,-0.898794046299167,-0.438371146789078));
+#101=VECTOR('',#100,8.038635942339949);
+#102=LINE('',#99,#101);
+#103=EDGE_CURVE('',#92,#74,#102,.T.);
+#104=ORIENTED_EDGE('',*,*,#103,.T.);
+#105=EDGE_LOOP('',(#82,#90,#98,#104));
+#106=FACE_OUTER_BOUND('',#105,.T.);
+#107=ADVANCED_FACE('',(#106),#72,.T.);
+#108=CARTESIAN_POINT('',(9.5,-154.12242933549609,-245.39862830856464));
+#109=DIRECTION('',(1.0,0.0,0.0));
+#110=DIRECTION('',(0.0,0.0,-1.0));
+#111=AXIS2_PLACEMENT_3D('',#108,#109,#110);
+#112=PLANE('',#111);
+#113=CARTESIAN_POINT('',(9.499999999999959,-128.38412326817914,-229.28437593362776));
+#114=VERTEX_POINT('',#113);
+#115=CARTESIAN_POINT('',(9.5,-134.55576379225374,-216.94109488547835));
+#116=DIRECTION('',(0.0,0.44721359549995,-0.89442719099992));
+#117=VECTOR('',#116,13.800207744523432);
+#118=LINE('',#115,#117);
+#119=EDGE_CURVE('',#76,#114,#118,.T.);
+#120=ORIENTED_EDGE('',*,*,#119,.T.);
+#121=CARTESIAN_POINT('',(9.5,-114.26074064106039,-244.87101668509908));
+#122=VERTEX_POINT('',#121);
+#123=CARTESIAN_POINT('',(9.5,-128.38412326817914,-229.28437593362776));
+#124=CARTESIAN_POINT('',(9.5,-127.82831147077175,-230.09276215475296));
+#125=CARTESIAN_POINT('',(9.500000000000002,-127.28890178126422,-230.87729285842758));
+#126=CARTESIAN_POINT('',(9.500000000000002,-126.75776955492802,-231.64978440210658));
+#127=CARTESIAN_POINT('',(9.500000000000002,-125.13491514611613,-234.01010306715364));
+#128=CARTESIAN_POINT('',(9.5,-123.48611338232431,-236.18364219229332));
+#129=CARTESIAN_POINT('',(9.5,-121.46728414785039,-238.42968431755622));
+#130=CARTESIAN_POINT('',(9.5,-119.87278260219642,-240.20364200510127));
+#131=CARTESIAN_POINT('',(9.5,-117.97339644841827,-242.0640898904349));
+#132=CARTESIAN_POINT('',(9.5,-115.92942229650103,-243.65399693433022));
+#133=CARTESIAN_POINT('',(9.5,-115.38548125721218,-244.07710193740374));
+#134=CARTESIAN_POINT('',(9.5,-114.82920704884215,-244.48382876948489));
+#135=CARTESIAN_POINT('',(9.5,-114.26074064106035,-244.87101668509899));
+#136=B_SPLINE_CURVE_WITH_KNOTS('',3,(#123,#124,#125,#126,#127,#128,#129,#130,#131,#132,#133,#134,#135),.UNSPECIFIED.,.F.,.U.,(4,3,3,3,4),(-2.549505865394868,-2.229450630738153,-1.25153397859135,-0.479160770029617,-0.273617326444547),.UNSPECIFIED.);
+#137=EDGE_CURVE('',#114,#122,#136,.T.);
+#138=ORIENTED_EDGE('',*,*,#137,.T.);
+#139=CARTESIAN_POINT('',(9.5,-112.42606667608349,-243.97618640298651));
+#140=VERTEX_POINT('',#139);
+#141=CARTESIAN_POINT('',(9.5,-112.42606667608348,-243.97618640298651));
+#142=DIRECTION('',(0.0,-0.898794046299169,-0.438371146789073));
+#143=VECTOR('',#142,2.041261813572604);
+#144=LINE('',#141,#143);
+#145=EDGE_CURVE('',#140,#122,#144,.T.);
+#146=ORIENTED_EDGE('',*,*,#145,.F.);
+#147=CARTESIAN_POINT('',(9.5,-127.33068566691213,-213.41718882881486));
+#148=DIRECTION('',(0.0,0.438371146789078,-0.898794046299167));
+#149=VECTOR('',#148,33.999999999999986);
+#150=LINE('',#147,#149);
+#151=EDGE_CURVE('',#84,#140,#150,.T.);
+#152=ORIENTED_EDGE('',*,*,#151,.F.);
+#153=ORIENTED_EDGE('',*,*,#89,.F.);
+#154=EDGE_LOOP('',(#120,#138,#146,#152,#153));
+#155=FACE_OUTER_BOUND('',#154,.T.);
+#156=ADVANCED_FACE('',(#155),#112,.T.);
+#157=CARTESIAN_POINT('',(-9.5,-154.12242933549609,-245.39862830856458));
+#158=DIRECTION('',(1.0,0.0,0.0));
+#159=DIRECTION('',(0.0,0.0,-1.0));
+#160=AXIS2_PLACEMENT_3D('',#157,#158,#159);
+#161=PLANE('',#160);
+#162=CARTESIAN_POINT('',(-9.499999999861416,-128.38412326788421,-229.28437593421762));
+#163=VERTEX_POINT('',#162);
+#164=CARTESIAN_POINT('',(-9.5,-128.38412326788423,-229.28437593421762));
+#165=DIRECTION('',(0.0,-0.44721359549995,0.89442719099992));
+#166=VECTOR('',#165,13.80020774518292);
+#167=LINE('',#164,#166);
+#168=EDGE_CURVE('',#163,#74,#167,.T.);
+#169=ORIENTED_EDGE('',*,*,#168,.T.);
+#170=ORIENTED_EDGE('',*,*,#103,.F.);
+#171=CARTESIAN_POINT('',(-9.5,-112.42606667608349,-243.97618640298651));
+#172=VERTEX_POINT('',#171);
+#173=CARTESIAN_POINT('',(-9.5,-112.42606667608349,-243.97618640298651));
+#174=DIRECTION('',(0.0,-0.438371146789078,0.898794046299167));
+#175=VECTOR('',#174,33.999999999999986);
+#176=LINE('',#173,#175);
+#177=EDGE_CURVE('',#172,#92,#176,.T.);
+#178=ORIENTED_EDGE('',*,*,#177,.F.);
+#179=CARTESIAN_POINT('',(-9.5,-114.26074064106035,-244.87101668509908));
+#180=VERTEX_POINT('',#179);
+#181=CARTESIAN_POINT('',(-9.5,-114.26074064106035,-244.87101668509908));
+#182=DIRECTION('',(0.0,0.898794046299166,0.438371146789078));
+#183=VECTOR('',#182,2.041261813572578);
+#184=LINE('',#181,#183);
+#185=EDGE_CURVE('',#180,#172,#184,.T.);
+#186=ORIENTED_EDGE('',*,*,#185,.F.);
+#187=CARTESIAN_POINT('',(-9.5,-114.26074064106034,-244.87101668509905));
+#188=CARTESIAN_POINT('',(-9.5,-116.96509338018586,-243.0290561297987));
+#189=CARTESIAN_POINT('',(-9.500000000000002,-119.40670162541522,-240.73578779285589));
+#190=CARTESIAN_POINT('',(-9.500000000000002,-124.33410960479256,-235.22206739735236));
+#191=CARTESIAN_POINT('',(-9.500000000000002,-125.9978817295238,-232.75498377089127));
+#192=CARTESIAN_POINT('',(-9.5,-128.23515803593108,-229.5010345971138));
+#193=CARTESIAN_POINT('',(-9.500000000000002,-128.30964065187007,-229.3927052656399));
+#194=CARTESIAN_POINT('',(-9.500000000000002,-128.38412326780909,-229.28437593416601));
+#195=B_SPLINE_CURVE_WITH_KNOTS('',3,(#187,#188,#189,#190,#191,#192,#193,#194),.UNSPECIFIED.,.F.,.U.,(4,2,2,4),(-4.033293563491657,-3.136723150717376,-1.991500872474368,-1.952061534598039),.UNSPECIFIED.);
+#196=EDGE_CURVE('',#180,#163,#195,.T.);
+#197=ORIENTED_EDGE('',*,*,#196,.T.);
+#198=EDGE_LOOP('',(#169,#170,#178,#186,#197));
+#199=FACE_OUTER_BOUND('',#198,.T.);
+#200=ADVANCED_FACE('',(#199),#161,.F.);
+#201=CARTESIAN_POINT('',(0.0,-127.33068566691213,-213.41718882881486));
+#202=DIRECTION('',(0.0,0.898794046299167,0.438371146789078));
+#203=DIRECTION('',(0.0,-0.438371146789078,0.898794046299167));
+#204=AXIS2_PLACEMENT_3D('',#201,#202,#203);
+#205=PLANE('',#204);
+#206=ORIENTED_EDGE('',*,*,#151,.T.);
+#207=CARTESIAN_POINT('',(-9.5,-112.42606667608349,-243.97618640298651));
+#208=DIRECTION('',(1.0,0.0,0.0));
+#209=VECTOR('',#208,19.0);
+#210=LINE('',#207,#209);
+#211=EDGE_CURVE('',#172,#140,#210,.T.);
+#212=ORIENTED_EDGE('',*,*,#211,.F.);
+#213=ORIENTED_EDGE('',*,*,#177,.T.);
+#214=ORIENTED_EDGE('',*,*,#97,.T.);
+#215=EDGE_LOOP('',(#206,#212,#213,#214));
+#216=FACE_OUTER_BOUND('',#215,.T.);
+#217=ADVANCED_FACE('',(#216),#205,.T.);
+#218=CARTESIAN_POINT('',(0.0,-112.42606667608349,-243.97618640298651));
+#219=DIRECTION('',(0.0,0.438371146789078,-0.898794046299167));
+#220=DIRECTION('',(-1.0,0.0,0.0));
+#221=AXIS2_PLACEMENT_3D('',#218,#219,#220);
+#222=PLANE('',#221);
+#223=CARTESIAN_POINT('',(-7.0,-114.67461888581951,-245.07287859276556));
+#224=VERTEX_POINT('',#223);
+#225=CARTESIAN_POINT('',(-6.999999999999997,-114.67461888581825,-245.07287859276596));
+#226=CARTESIAN_POINT('',(-7.514321267112061,-114.67461888581825,-245.07287859276596));
+#227=CARTESIAN_POINT('',(-8.026224444362448,-114.62349255278542,-245.04794261401213));
+#228=CARTESIAN_POINT('',(-8.859030836958212,-114.45616694970735,-244.96633246448951));
+#229=CARTESIAN_POINT('',(-9.1835704150647,-114.36849688681872,-244.92357291777691));
+#230=CARTESIAN_POINT('',(-9.5,-114.26074064106034,-244.87101668509905));
+#231=B_SPLINE_CURVE_WITH_KNOTS('',3,(#225,#226,#227,#228,#229,#230),.UNSPECIFIED.,.F.,.U.,(4,2,4),(-0.310410247028962,-0.156073016026814,-0.05435169784219),.UNSPECIFIED.);
+#232=EDGE_CURVE('',#224,#180,#231,.T.);
+#233=ORIENTED_EDGE('',*,*,#232,.T.);
+#234=ORIENTED_EDGE('',*,*,#185,.T.);
+#235=ORIENTED_EDGE('',*,*,#211,.T.);
+#236=ORIENTED_EDGE('',*,*,#145,.T.);
+#237=CARTESIAN_POINT('',(7.0,-114.67461888581951,-245.07287859276562));
+#238=VERTEX_POINT('',#237);
+#239=CARTESIAN_POINT('',(9.499999999999982,-114.26074064106035,-244.87101668509908));
+#240=CARTESIAN_POINT('',(9.183563565221999,-114.36849921944933,-244.92357405547691));
+#241=CARTESIAN_POINT('',(8.859016799781285,-114.45617074079443,-244.96633431352595));
+#242=CARTESIAN_POINT('',(8.026209835572091,-114.62349401502082,-245.04794332719172));
+#243=CARTESIAN_POINT('',(7.514313910855082,-114.67461888581823,-245.07287859276596));
+#244=CARTESIAN_POINT('',(7.0,-114.67461888581823,-245.07287859276596));
+#245=B_SPLINE_CURVE_WITH_KNOTS('',3,(#239,#240,#241,#242,#243,#244),.UNSPECIFIED.,.F.,.U.,(4,2,4),(-0.255990772892339,-0.154294173256525,0.0),.UNSPECIFIED.);
+#246=EDGE_CURVE('',#122,#238,#245,.T.);
+#247=ORIENTED_EDGE('',*,*,#246,.T.);
+#248=CARTESIAN_POINT('',(7.0,-114.67461888581951,-245.07287859276562));
+#249=CARTESIAN_POINT('',(2.33333333333333,-114.67461888581951,-245.07287859276562));
+#250=CARTESIAN_POINT('',(-2.333333333333331,-114.67461888581981,-245.07287859276545));
+#251=CARTESIAN_POINT('',(-7.0,-114.67461888581951,-245.07287859276556));
+#252=B_SPLINE_CURVE_WITH_KNOTS('',3,(#248,#249,#250,#251),.UNSPECIFIED.,.F.,.U.,(4,4),(-1.7,-0.299999999999999),.UNSPECIFIED.);
+#253=EDGE_CURVE('',#238,#224,#252,.T.);
+#254=ORIENTED_EDGE('',*,*,#253,.T.);
+#255=EDGE_LOOP('',(#233,#234,#235,#236,#247,#254));
+#256=FACE_OUTER_BOUND('',#255,.T.);
+#257=ADVANCED_FACE('',(#256),#222,.T.);
+#258=CARTESIAN_POINT('',(-9.583792874361004,-128.40082846489102,-229.2105178689153));
+#259=CARTESIAN_POINT('',(-8.753805011066691,-128.63422738504957,-229.37099298580398));
+#260=CARTESIAN_POINT('',(-7.876987555377766,-128.75411677835621,-229.45342380592746));
+#261=CARTESIAN_POINT('',(-7.0,-128.75411677835621,-229.45342380592746));
+#262=CARTESIAN_POINT('',(-9.583792874361004,-127.84543043743739,-230.01830229293785));
+#263=CARTESIAN_POINT('',(-8.753805011066692,-128.07882935759594,-230.17877740982652));
+#264=CARTESIAN_POINT('',(-7.876987555377767,-128.1987187509026,-230.26120822994997));
+#265=CARTESIAN_POINT('',(-7.0,-128.1987187509026,-230.26120822994997));
+#266=CARTESIAN_POINT('',(-9.583792874361004,-127.29003240998378,-230.82608671696028));
+#267=CARTESIAN_POINT('',(-8.753805011066689,-127.52343133014233,-230.98656183384895));
+#268=CARTESIAN_POINT('',(-7.876987555377765,-127.64332072344897,-231.06899265397243));
+#269=CARTESIAN_POINT('',(-7.0,-127.64332072344897,-231.06899265397243));
+#270=CARTESIAN_POINT('',(-9.583792874361004,-125.35282632071068,-233.64360645539151));
+#271=CARTESIAN_POINT('',(-8.753805011066691,-125.58140475135609,-233.8110444936766));
+#272=CARTESIAN_POINT('',(-7.876987555377766,-125.69890362817885,-233.8970002552299));
+#273=CARTESIAN_POINT('',(-7.0,-125.69890362817885,-233.8970002552299));
+#274=CARTESIAN_POINT('',(-9.583792874361,-122.87180578845781,-236.94860917492969));
+#275=CARTESIAN_POINT('',(-8.753805011066687,-123.09072565946659,-237.12925607956799));
+#276=CARTESIAN_POINT('',(-7.876987555377763,-123.20320921112466,-237.2220717666352));
+#277=CARTESIAN_POINT('',(-6.999999999999996,-123.20320921112466,-237.2220717666352));
+#278=CARTESIAN_POINT('',(-9.583792874361004,-118.68627944596851,-241.4004544017786));
+#279=CARTESIAN_POINT('',(-8.753805011066691,-118.88188952189721,-241.60628000677079));
+#280=CARTESIAN_POINT('',(-7.876987555377765,-118.98239464463768,-241.71199121932301));
+#281=CARTESIAN_POINT('',(-7.0,-118.98239464463768,-241.71199121932301));
+#282=CARTESIAN_POINT('',(-9.583792874361004,-115.79426444688382,-243.79960387434329));
+#283=CARTESIAN_POINT('',(-8.753805011066691,-115.96797281074774,-244.02399877469691));
+#284=CARTESIAN_POINT('',(-7.876987555377767,-116.05729571947728,-244.13928839662969));
+#285=CARTESIAN_POINT('',(-7.0,-116.05729571947728,-244.13928839662969));
+#286=CARTESIAN_POINT('',(-9.583792874361004,-114.1675783790657,-244.90032423333005));
+#287=CARTESIAN_POINT('',(-8.753805011066691,-114.326313970653,-245.13490967839229));
+#288=CARTESIAN_POINT('',(-7.876987555377766,-114.40785125351039,-245.2554085507434));
+#289=CARTESIAN_POINT('',(-7.0,-114.40785125351039,-245.2554085507434));
+#290=B_SPLINE_SURFACE_WITH_KNOTS('',3,3,((#258,#262,#266,#270,#274,#278,#282,#286),(#259,#263,#267,#271,#275,#279,#283,#287),(#260,#264,#268,#272,#276,#280,#284,#288),(#261,#265,#269,#273,#277,#281,#285,#289)),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(4,2,1,1,4),(0.790634643297327,1.0),(-0.294089166773189,0.0,0.734224722705207,1.223707871175345,1.713191019645484),.UNSPECIFIED.);
+#291=ORIENTED_EDGE('',*,*,#196,.F.);
+#292=ORIENTED_EDGE('',*,*,#232,.F.);
+#293=CARTESIAN_POINT('',(-7.0,-127.0879226959953,-231.87677707799503));
+#294=VERTEX_POINT('',#293);
+#295=CARTESIAN_POINT('',(-7.0,-114.67464559461503,-245.07291722309969));
+#296=CARTESIAN_POINT('',(-7.0,-116.21559760871342,-244.00751166926955));
+#297=CARTESIAN_POINT('',(-7.0,-119.04781431727643,-241.64240060923049));
+#298=CARTESIAN_POINT('',(-6.999999999999996,-123.20320921112466,-237.2220717666352));
+#299=CARTESIAN_POINT('',(-7.0,-125.69890362817885,-233.8970002552299));
+#300=CARTESIAN_POINT('',(-7.0,-127.08746336970252,-231.87744513334721));
+#301=CARTESIAN_POINT('',(-7.0,-127.08769303290454,-231.87711110559022));
+#302=CARTESIAN_POINT('',(-7.0,-127.08792269598905,-231.87677707800412));
+#303=B_SPLINE_CURVE_WITH_KNOTS('',3,(#295,#296,#297,#298,#299,#300,#301,#302),.UNSPECIFIED.,.F.,.U.,(4,1,1,2,4),(-1.686637757494909,-1.223707871175345,-0.734224722705207,0.0,0.000121458498766),.UNSPECIFIED.);
+#304=EDGE_CURVE('',#224,#294,#303,.T.);
+#305=ORIENTED_EDGE('',*,*,#304,.T.);
+#306=CARTESIAN_POINT('',(-6.999999999999996,-127.08792269599633,-231.87677707799349));
+#307=CARTESIAN_POINT('',(-7.148470586808164,-127.08792269599633,-231.87677707799349));
+#308=CARTESIAN_POINT('',(-7.292068871842577,-127.10129378120007,-231.85003490758601));
+#309=CARTESIAN_POINT('',(-7.610286661925785,-127.15676163050993,-231.73909920896625));
+#310=CARTESIAN_POINT('',(-7.775251284797805,-127.20523957952511,-231.64214331093589));
+#311=CARTESIAN_POINT('',(-8.198525165129244,-127.3642922582502,-231.32403795348574));
+#312=CARTESIAN_POINT('',(-8.439459145839356,-127.50192058626772,-231.04878129745072));
+#313=CARTESIAN_POINT('',(-8.956891515828943,-127.85197811601093,-230.3486662379643));
+#314=CARTESIAN_POINT('',(-9.245265595831997,-128.11301042474983,-229.82660162048643));
+#315=CARTESIAN_POINT('',(-9.499999999722832,-128.38412326788421,-229.28437593421765));
+#316=B_SPLINE_CURVE_WITH_KNOTS('',3,(#306,#307,#308,#309,#310,#311,#312,#313,#314,#315),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,4),(0.0,0.04454117604245,0.102457901489943,0.210463769319412,0.384639828372491),.UNSPECIFIED.);
+#317=EDGE_CURVE('',#294,#163,#316,.T.);
+#318=ORIENTED_EDGE('',*,*,#317,.T.);
+#319=EDGE_LOOP('',(#291,#292,#305,#318));
+#320=FACE_OUTER_BOUND('',#319,.T.);
+#321=ADVANCED_FACE('',(#320),#290,.F.);
+#322=CARTESIAN_POINT('',(-15.0,-127.08792269599533,-231.87677707799494));
+#323=CARTESIAN_POINT('',(-15.0,-104.01182360024224,-265.4392178778146));
+#324=CARTESIAN_POINT('',(-15.0,-78.057565801626382,-233.98997998240955));
+#325=CARTESIAN_POINT('',(-15.0,-74.63102478441084,-239.53157390545692));
+#326=CARTESIAN_POINT('',(-15.0,-45.804480687021318,-212.04891825295385));
+#327=CARTESIAN_POINT('',(-15.0,-31.384082374663951,-239.1159136824734));
+#328=CARTESIAN_POINT('',(-15.0,-36.429045997141678,-239.59739443336886));
+#329=CARTESIAN_POINT('',(-15.0,-28.000000000000043,-240.00000000000014));
+#330=CARTESIAN_POINT('',(15.0,-127.08792269599533,-231.87677707799494));
+#331=CARTESIAN_POINT('',(15.0,-104.01182360024224,-265.4392178778146));
+#332=CARTESIAN_POINT('',(15.0,-78.057565801626382,-233.98997998240955));
+#333=CARTESIAN_POINT('',(15.0,-74.63102478441084,-239.53157390545692));
+#334=CARTESIAN_POINT('',(15.0,-45.804480687021318,-212.04891825295385));
+#335=CARTESIAN_POINT('',(15.0,-31.384082374663951,-239.1159136824734));
+#336=CARTESIAN_POINT('',(15.0,-36.429045997141678,-239.59739443336886));
+#337=CARTESIAN_POINT('',(15.0,-28.000000000000043,-240.00000000000014));
+#338=B_SPLINE_SURFACE_WITH_KNOTS('',4,1,((#322,#330),(#323,#331),(#324,#332),(#325,#333),(#326,#334),(#327,#335),(#328,#336),(#329,#337)),.UNSPECIFIED.,.F.,.F.,.F.,(5,1,1,1,5),(2,2),(0.0,0.409989108085586,0.600128598032593,0.740203788963304,1.0),(-1.5,1.5),.UNSPECIFIED.);
+#339=ORIENTED_EDGE('',*,*,#253,.F.);
+#340=CARTESIAN_POINT('',(7.0,-127.0879226959953,-231.87677707799497));
+#341=VERTEX_POINT('',#340);
+#342=CARTESIAN_POINT('',(7.0,-127.08792269598976,-231.87677707800299));
+#343=CARTESIAN_POINT('',(7.0,-127.08767086471356,-231.87714334754725));
+#344=CARTESIAN_POINT('',(7.0,-127.08741903328443,-231.87750961731396));
+#345=CARTESIAN_POINT('',(7.0,-125.23373924844543,-234.5735466633644));
+#346=CARTESIAN_POINT('',(6.999999999999998,-121.72942238619008,-239.13332700351279));
+#347=CARTESIAN_POINT('',(6.999999999999997,-117.02667889742129,-243.44812163514626));
+#348=CARTESIAN_POINT('',(7.0,-114.67468566347858,-245.07297525415098));
+#349=B_SPLINE_CURVE_WITH_KNOTS('',3,(#342,#343,#344,#345,#346,#347,#348),.UNSPECIFIED.,.F.,.U.,(4,2,1,4),(-11.479593222777408,-11.479472743461045,-10.592770087654506,-9.953573903005102),.UNSPECIFIED.);
+#350=EDGE_CURVE('',#341,#238,#349,.T.);
+#351=ORIENTED_EDGE('',*,*,#350,.F.);
+#352=CARTESIAN_POINT('',(0.0,-127.08792269599536,-231.87677707799506));
+#353=VERTEX_POINT('',#352);
+#354=CARTESIAN_POINT('',(0.0,-127.08792269599536,-231.87677707799506));
+#355=DIRECTION('',(1.0,0.0,0.0));
+#356=VECTOR('',#355,7.0);
+#357=LINE('',#354,#356);
+#358=EDGE_CURVE('',#353,#341,#357,.T.);
+#359=ORIENTED_EDGE('',*,*,#358,.F.);
+#360=CARTESIAN_POINT('',(0.0,-127.08792269599536,-231.87677707799506));
+#361=DIRECTION('',(-1.0,0.0,0.0));
+#362=VECTOR('',#361,7.0);
+#363=LINE('',#360,#362);
+#364=EDGE_CURVE('',#353,#294,#363,.T.);
+#365=ORIENTED_EDGE('',*,*,#364,.T.);
+#366=ORIENTED_EDGE('',*,*,#304,.F.);
+#367=EDGE_LOOP('',(#339,#351,#359,#365,#366));
+#368=FACE_OUTER_BOUND('',#367,.T.);
+#369=ADVANCED_FACE('',(#368),#338,.T.);
+#370=CARTESIAN_POINT('',(9.605261137227799,-114.14354655367157,-244.90768726933612));
+#371=CARTESIAN_POINT('',(8.768927537127384,-114.30479439692709,-245.14638884649059));
+#372=CARTESIAN_POINT('',(7.884552542558954,-114.38766075105028,-245.26905919682144));
+#373=CARTESIAN_POINT('',(7.0,-114.38766075105028,-245.26905919682144));
+#374=CARTESIAN_POINT('',(9.605261137227799,-116.5881577388426,-243.25630194584474));
+#375=CARTESIAN_POINT('',(8.768927537127386,-116.77222991504962,-243.47931594211676));
+#376=CARTESIAN_POINT('',(7.884552542558955,-116.86711697169829,-243.59413533250512));
+#377=CARTESIAN_POINT('',(7.0,-116.86711697169829,-243.59413533250512));
+#378=CARTESIAN_POINT('',(9.605261137227799,-121.34222168497536,-238.9197050780399));
+#379=CARTESIAN_POINT('',(8.768927537127384,-121.55887745587944,-239.11180237738367));
+#380=CARTESIAN_POINT('',(7.884552542558954,-121.67010041093459,-239.21051613541528));
+#381=CARTESIAN_POINT('',(6.999999999999998,-121.67010041093459,-239.21051613541528));
+#382=CARTESIAN_POINT('',(9.605261137227799,-124.88417699718411,-234.31223018723639));
+#383=CARTESIAN_POINT('',(8.768927537127386,-125.11490868884324,-234.48493988650165));
+#384=CARTESIAN_POINT('',(7.884552542558955,-125.23373924844543,-234.5735466633644));
+#385=CARTESIAN_POINT('',(7.0,-125.23373924844543,-234.5735466633644));
+#386=CARTESIAN_POINT('',(9.605261137227799,-127.28737805317481,-230.81695601472273));
+#387=CARTESIAN_POINT('',(8.768927537127384,-127.52474629436227,-230.98016026701464));
+#388=CARTESIAN_POINT('',(7.884552542558954,-127.64673143434746,-231.06403203293584));
+#389=CARTESIAN_POINT('',(7.0,-127.64673143434746,-231.06403203293584));
+#390=CARTESIAN_POINT('',(9.605261137227799,-127.84618679152693,-230.00421096966363));
+#391=CARTESIAN_POINT('',(8.768927537127384,-128.0835550327144,-230.16741522195557));
+#392=CARTESIAN_POINT('',(7.884552542558955,-128.20554017269959,-230.25128698787677));
+#393=CARTESIAN_POINT('',(7.0,-128.20554017269959,-230.25128698787677));
+#394=CARTESIAN_POINT('',(9.605261137227799,-128.40499552987907,-229.19146592460459));
+#395=CARTESIAN_POINT('',(8.768927537127384,-128.64236377106653,-229.35467017689649));
+#396=CARTESIAN_POINT('',(7.884552542558954,-128.76434891105171,-229.43854194281769));
+#397=CARTESIAN_POINT('',(7.0,-128.76434891105171,-229.43854194281769));
+#398=B_SPLINE_SURFACE_WITH_KNOTS('',3,3,((#370,#374,#378,#382,#386,#390,#394),(#371,#375,#379,#383,#387,#391,#395),(#372,#376,#380,#384,#388,#392,#396),(#373,#377,#381,#385,#389,#393,#397)),.UNSPECIFIED.,.F.,.F.,.F.,(4,4),(4,1,2,4),(0.788828635640857,1.0),(9.927743095799601,10.592770087654506,11.479472743461045,11.747175132598427),.UNSPECIFIED.);
+#399=ORIENTED_EDGE('',*,*,#137,.F.);
+#400=CARTESIAN_POINT('',(9.499999999999911,-128.38412326817914,-229.28437593362781));
+#401=CARTESIAN_POINT('',(9.3994851358548,-128.27714568610637,-229.49833109777336));
+#402=CARTESIAN_POINT('',(9.296038825613914,-128.17419703239352,-229.70422840519842));
+#403=CARTESIAN_POINT('',(8.895112863635783,-127.80507891347811,-230.44246464302927));
+#404=CARTESIAN_POINT('',(8.530926690761625,-127.5286119615233,-230.9953985469395));
+#405=CARTESIAN_POINT('',(7.945966806342568,-127.26408236560482,-231.52445773877648));
+#406=CARTESIAN_POINT('',(7.760679107395449,-127.19658286442677,-231.6594567411326));
+#407=CARTESIAN_POINT('',(7.466694462776436,-127.13040058715706,-231.79182129567204));
+#408=CARTESIAN_POINT('',(7.37412178603409,-127.11436189551148,-231.82389867896319));
+#409=CARTESIAN_POINT('',(7.186677580736721,-127.09328602048174,-231.86605042902266));
+#410=CARTESIAN_POINT('',(7.094030626831122,-127.08792269599634,-231.87677707799344));
+#411=CARTESIAN_POINT('',(7.0,-127.08792269599634,-231.87677707799344));
+#412=B_SPLINE_CURVE_WITH_KNOTS('',3,(#400,#401,#402,#403,#404,#405,#406,#407,#408,#409,#410,#411),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,2,4),(3.608559270923466,3.735964757044102,4.088871539837107,4.223484657564931,4.281598400863889,4.336658449882064),.UNSPECIFIED.);
+#413=EDGE_CURVE('',#114,#341,#412,.T.);
+#414=ORIENTED_EDGE('',*,*,#413,.T.);
+#415=ORIENTED_EDGE('',*,*,#350,.T.);
+#416=ORIENTED_EDGE('',*,*,#246,.F.);
+#417=EDGE_LOOP('',(#399,#414,#415,#416));
+#418=FACE_OUTER_BOUND('',#417,.T.);
+#419=ADVANCED_FACE('',(#418),#398,.F.);
+#420=CARTESIAN_POINT('',(0.0,-137.82104898799432,-210.41052449399706));
+#421=DIRECTION('',(0.0,-0.89442719099992,-0.447213595499951));
+#422=DIRECTION('',(0.0,0.447213595499951,-0.89442719099992));
+#423=AXIS2_PLACEMENT_3D('',#420,#421,#422);
+#424=PLANE('',#423);
+#425=ORIENTED_EDGE('',*,*,#168,.F.);
+#426=ORIENTED_EDGE('',*,*,#317,.F.);
+#427=ORIENTED_EDGE('',*,*,#364,.F.);
+#428=ORIENTED_EDGE('',*,*,#358,.T.);
+#429=ORIENTED_EDGE('',*,*,#413,.F.);
+#430=ORIENTED_EDGE('',*,*,#119,.F.);
+#431=ORIENTED_EDGE('',*,*,#81,.F.);
+#432=EDGE_LOOP('',(#425,#426,#427,#428,#429,#430,#431));
+#433=FACE_OUTER_BOUND('',#432,.T.);
+#434=ADVANCED_FACE('',(#433),#424,.T.);
+#435=CLOSED_SHELL('',(#107,#156,#200,#217,#257,#321,#369,#419,#434));
+#436=MANIFOLD_SOLID_BREP('Solid1',#435);
+#437=COLOUR_RGB('PTFE',0.917647004127502,0.921568989753723,0.933332979679108);
+#438=FILL_AREA_STYLE_COLOUR('PTFE',#437);
+#439=FILL_AREA_STYLE('PTFE',(#438));
+#440=SURFACE_STYLE_FILL_AREA(#439);
+#441=SURFACE_SIDE_STYLE('PTFE',(#440));
+#442=SURFACE_STYLE_USAGE(.BOTH.,#441);
+#443=PRESENTATION_STYLE_ASSIGNMENT((#442));
+#444=STYLED_ITEM('',(#443),#436);
+#445=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#444),#36);
+#446=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#436),#36);
+#447=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#446,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM422_Songbird_22lr_Pistol-JamesRPatrick/STEP/PM422HammerPin1.stp

@@ -0,0 +1,374 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM422\\PM422HammerPin1.stp','2015-05-16T21:12:06',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM422HammerPin1','PM422HammerPin1',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(0.0,0.0,29.875));
+#69=DIRECTION('',(0.0,1.0,0.0));
+#70=DIRECTION('',(1.0,0.0,0.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=CYLINDRICAL_SURFACE('',#71,0.875);
+#73=CARTESIAN_POINT('',(-0.875,3.903123748999,29.874999999999993));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(-0.875,3.903123748999,29.874999999999993));
+#76=CARTESIAN_POINT('',(-0.875,3.903123748999,29.764743986339713));
+#77=CARTESIAN_POINT('',(-0.852892096262691,3.908280756848077,29.647392313229442));
+#78=CARTESIAN_POINT('',(-0.763486720346607,3.926725275135369,29.431921827953794));
+#79=CARTESIAN_POINT('',(-0.6962077948332,3.939726702938651,29.333770927756746));
+#80=CARTESIAN_POINT('',(-0.54123533342186,3.963989796555402,29.178798466345405));
+#81=CARTESIAN_POINT('',(-0.443081792234842,3.976854104224627,29.111514643745771));
+#82=CARTESIAN_POINT('',(-0.227602063302997,3.994982771045772,29.022105708423645));
+#83=CARTESIAN_POINT('',(-0.110247104920009,4.0,29.0));
+#84=CARTESIAN_POINT('',(0.11024710492001,4.0,29.0));
+#85=CARTESIAN_POINT('',(0.227602063302998,3.994982771045772,29.022105708423645));
+#86=CARTESIAN_POINT('',(0.443081792234842,3.976854104224627,29.111514643745771));
+#87=CARTESIAN_POINT('',(0.541235333421861,3.963989796555401,29.178798466345405));
+#88=CARTESIAN_POINT('',(0.6962077948332,3.93972670293865,29.333770927756746));
+#89=CARTESIAN_POINT('',(0.763486720346607,3.926725275135368,29.431921827953794));
+#90=CARTESIAN_POINT('',(0.852892096262691,3.908280756848076,29.647392313229442));
+#91=CARTESIAN_POINT('',(0.875,3.903123748999,29.764743986339717));
+#92=CARTESIAN_POINT('',(0.875,3.903123748999,29.98525601366028));
+#93=CARTESIAN_POINT('',(0.852892096262691,3.908280756848076,30.102607686770554));
+#94=CARTESIAN_POINT('',(0.763486720346607,3.926725275135368,30.318078172046199));
+#95=CARTESIAN_POINT('',(0.696207794833201,3.93972670293865,30.416229072243254));
+#96=CARTESIAN_POINT('',(0.541235333421861,3.963989796555401,30.571201533654595));
+#97=CARTESIAN_POINT('',(0.443081792234842,3.976854104224627,30.638485356254222));
+#98=CARTESIAN_POINT('',(0.227602063302998,3.994982771045772,30.727894291576348));
+#99=CARTESIAN_POINT('',(0.110247104920009,4.0,30.749999999999996));
+#100=CARTESIAN_POINT('',(-0.11024710492001,4.0,30.749999999999996));
+#101=CARTESIAN_POINT('',(-0.227602063302998,3.994982771045772,30.727894291576348));
+#102=CARTESIAN_POINT('',(-0.443081792234842,3.976854104224627,30.638485356254222));
+#103=CARTESIAN_POINT('',(-0.541235333421861,3.963989796555401,30.571201533654595));
+#104=CARTESIAN_POINT('',(-0.696207794833201,3.93972670293865,30.416229072243254));
+#105=CARTESIAN_POINT('',(-0.763486720346607,3.926725275135368,30.318078172046199));
+#106=CARTESIAN_POINT('',(-0.852892096262691,3.908280756848076,30.102607686770554));
+#107=CARTESIAN_POINT('',(-0.875,3.903123748999,29.985256013660276));
+#108=CARTESIAN_POINT('',(-0.875,3.903123748999,29.874999999999993));
+#109=B_SPLINE_CURVE_WITH_KNOTS('',3,(#75,#76,#77,#78,#79,#80,#81,#82,#83,#84,#85,#86,#87,#88,#89,#90,#91,#92,#93,#94,#95,#96,#97,#98,#99,#100,#101,#102,#103,#104,#105,#106,#107,#108),.UNSPECIFIED.,.T.,.U.,(4,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,4),(0.0,0.033076804098084,0.066153608196169,0.099227739672171,0.132301871148174,0.165376002624177,0.19845013410018,0.231526938198264,0.264603742296348,0.297680546394433,0.330757350492517,0.36383148196852,0.396905613444522,0.429979744920525,0.463053876396528,0.496130680494612,0.529207484592697),.UNSPECIFIED.);
+#110=EDGE_CURVE('',#74,#74,#109,.T.);
+#111=ORIENTED_EDGE('',*,*,#110,.F.);
+#112=EDGE_LOOP('',(#111));
+#113=FACE_OUTER_BOUND('',#112,.T.);
+#114=CARTESIAN_POINT('',(-0.875,-3.903123748998999,29.875));
+#115=VERTEX_POINT('',#114);
+#116=CARTESIAN_POINT('',(-0.875,-3.903123748998999,29.875));
+#117=CARTESIAN_POINT('',(-0.875,-3.903123748998999,29.98525601366028));
+#118=CARTESIAN_POINT('',(-0.852892096262691,-3.908280756848076,30.102607686770554));
+#119=CARTESIAN_POINT('',(-0.763486720346607,-3.926725275135368,30.318078172046199));
+#120=CARTESIAN_POINT('',(-0.6962077948332,-3.93972670293865,30.416229072243254));
+#121=CARTESIAN_POINT('',(-0.541235333421861,-3.963989796555401,30.571201533654595));
+#122=CARTESIAN_POINT('',(-0.443081792234842,-3.976854104224627,30.638485356254222));
+#123=CARTESIAN_POINT('',(-0.227602063302998,-3.994982771045772,30.727894291576348));
+#124=CARTESIAN_POINT('',(-0.11024710492001,-4.0,30.749999999999996));
+#125=CARTESIAN_POINT('',(0.110247104920009,-4.0,30.749999999999996));
+#126=CARTESIAN_POINT('',(0.227602063302998,-3.994982771045772,30.727894291576348));
+#127=CARTESIAN_POINT('',(0.443081792234842,-3.976854104224627,30.638485356254222));
+#128=CARTESIAN_POINT('',(0.541235333421861,-3.963989796555401,30.571201533654595));
+#129=CARTESIAN_POINT('',(0.696207794833201,-3.93972670293865,30.416229072243254));
+#130=CARTESIAN_POINT('',(0.763486720346607,-3.926725275135368,30.318078172046199));
+#131=CARTESIAN_POINT('',(0.852892096262691,-3.908280756848076,30.102607686770554));
+#132=CARTESIAN_POINT('',(0.875,-3.903123748999,29.98525601366028));
+#133=CARTESIAN_POINT('',(0.875,-3.903123748999,29.764743986339717));
+#134=CARTESIAN_POINT('',(0.852892096262691,-3.908280756848076,29.647392313229442));
+#135=CARTESIAN_POINT('',(0.763486720346607,-3.926725275135368,29.431921827953794));
+#136=CARTESIAN_POINT('',(0.696207794833201,-3.93972670293865,29.333770927756746));
+#137=CARTESIAN_POINT('',(0.541235333421861,-3.963989796555401,29.178798466345405));
+#138=CARTESIAN_POINT('',(0.443081792234842,-3.976854104224627,29.111514643745771));
+#139=CARTESIAN_POINT('',(0.227602063302998,-3.994982771045772,29.022105708423645));
+#140=CARTESIAN_POINT('',(0.11024710492001,-4.0,29.0));
+#141=CARTESIAN_POINT('',(-0.110247104920009,-4.0,29.0));
+#142=CARTESIAN_POINT('',(-0.227602063302997,-3.994982771045772,29.022105708423645));
+#143=CARTESIAN_POINT('',(-0.443081792234842,-3.976854104224627,29.111514643745771));
+#144=CARTESIAN_POINT('',(-0.54123533342186,-3.963989796555402,29.178798466345405));
+#145=CARTESIAN_POINT('',(-0.6962077948332,-3.939726702938651,29.333770927756746));
+#146=CARTESIAN_POINT('',(-0.763486720346607,-3.926725275135369,29.431921827953794));
+#147=CARTESIAN_POINT('',(-0.852892096262691,-3.908280756848077,29.647392313229442));
+#148=CARTESIAN_POINT('',(-0.875,-3.903123748999,29.764743986339713));
+#149=CARTESIAN_POINT('',(-0.875,-3.903123748999,29.874999999999993));
+#150=B_SPLINE_CURVE_WITH_KNOTS('',3,(#116,#117,#118,#119,#120,#121,#122,#123,#124,#125,#126,#127,#128,#129,#130,#131,#132,#133,#134,#135,#136,#137,#138,#139,#140,#141,#142,#143,#144,#145,#146,#147,#148,#149),.UNSPECIFIED.,.T.,.U.,(4,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,4),(0.0,0.033076804098084,0.066153608196169,0.099227739672171,0.132301871148174,0.165376002624177,0.19845013410018,0.231526938198264,0.264603742296348,0.297680546394433,0.330757350492517,0.36383148196852,0.396905613444522,0.429979744920525,0.463053876396528,0.496130680494612,0.529207484592697),.UNSPECIFIED.);
+#151=EDGE_CURVE('',#115,#115,#150,.T.);
+#152=ORIENTED_EDGE('',*,*,#151,.F.);
+#153=EDGE_LOOP('',(#152));
+#154=FACE_BOUND('',#153,.T.);
+#155=ADVANCED_FACE('',(#113,#154),#72,.F.);
+#156=CARTESIAN_POINT('',(-3.540548E-016,1.387779E-016,0.0));
+#157=DIRECTION('',(0.0,0.0,1.0));
+#158=DIRECTION('',(1.0,0.0,0.0));
+#159=AXIS2_PLACEMENT_3D('',#156,#157,#158);
+#160=PLANE('',#159);
+#161=CARTESIAN_POINT('',(0.0,4.0,0.0));
+#162=VERTEX_POINT('',#161);
+#163=CARTESIAN_POINT('',(0.0,-4.0,0.0));
+#164=VERTEX_POINT('',#163);
+#165=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#166=DIRECTION('',(0.0,0.0,-1.0));
+#167=DIRECTION('',(-1.0,0.0,0.0));
+#168=AXIS2_PLACEMENT_3D('',#165,#166,#167);
+#169=CIRCLE('',#168,4.0);
+#170=EDGE_CURVE('',#162,#164,#169,.T.);
+#171=ORIENTED_EDGE('',*,*,#170,.T.);
+#172=CARTESIAN_POINT('',(4.47213595499958,-4.0,0.0));
+#173=VERTEX_POINT('',#172);
+#174=CARTESIAN_POINT('',(4.47213595499958,-4.0,0.0));
+#175=DIRECTION('',(-1.0,0.0,0.0));
+#176=VECTOR('',#175,4.47213595499958);
+#177=LINE('',#174,#176);
+#178=EDGE_CURVE('',#173,#164,#177,.T.);
+#179=ORIENTED_EDGE('',*,*,#178,.F.);
+#180=CARTESIAN_POINT('',(4.47213595499958,4.0,0.0));
+#181=VERTEX_POINT('',#180);
+#182=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#183=DIRECTION('',(0.0,0.0,-1.0));
+#184=DIRECTION('',(-1.0,0.0,0.0));
+#185=AXIS2_PLACEMENT_3D('',#182,#183,#184);
+#186=CIRCLE('',#185,6.000000000000001);
+#187=EDGE_CURVE('',#181,#173,#186,.T.);
+#188=ORIENTED_EDGE('',*,*,#187,.F.);
+#189=CARTESIAN_POINT('',(0.0,4.0,0.0));
+#190=DIRECTION('',(1.0,0.0,0.0));
+#191=VECTOR('',#190,4.47213595499958);
+#192=LINE('',#189,#191);
+#193=EDGE_CURVE('',#162,#181,#192,.T.);
+#194=ORIENTED_EDGE('',*,*,#193,.F.);
+#195=EDGE_LOOP('',(#171,#179,#188,#194));
+#196=FACE_OUTER_BOUND('',#195,.T.);
+#197=ADVANCED_FACE('',(#196),#160,.T.);
+#198=CARTESIAN_POINT('',(-3.540548E-016,1.387779E-016,0.0));
+#199=DIRECTION('',(0.0,0.0,1.0));
+#200=DIRECTION('',(1.0,0.0,0.0));
+#201=AXIS2_PLACEMENT_3D('',#198,#199,#200);
+#202=PLANE('',#201);
+#203=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#204=DIRECTION('',(0.0,0.0,-1.0));
+#205=DIRECTION('',(-1.0,0.0,0.0));
+#206=AXIS2_PLACEMENT_3D('',#203,#204,#205);
+#207=CIRCLE('',#206,4.0);
+#208=EDGE_CURVE('',#164,#162,#207,.T.);
+#209=ORIENTED_EDGE('',*,*,#208,.T.);
+#210=CARTESIAN_POINT('',(-4.47213595499958,4.0,0.0));
+#211=VERTEX_POINT('',#210);
+#212=CARTESIAN_POINT('',(-4.47213595499958,4.0,0.0));
+#213=DIRECTION('',(1.0,0.0,0.0));
+#214=VECTOR('',#213,4.47213595499958);
+#215=LINE('',#212,#214);
+#216=EDGE_CURVE('',#211,#162,#215,.T.);
+#217=ORIENTED_EDGE('',*,*,#216,.F.);
+#218=CARTESIAN_POINT('',(-4.47213595499958,-4.0,0.0));
+#219=VERTEX_POINT('',#218);
+#220=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#221=DIRECTION('',(0.0,0.0,-1.0));
+#222=DIRECTION('',(-1.0,0.0,0.0));
+#223=AXIS2_PLACEMENT_3D('',#220,#221,#222);
+#224=CIRCLE('',#223,6.000000000000001);
+#225=EDGE_CURVE('',#219,#211,#224,.T.);
+#226=ORIENTED_EDGE('',*,*,#225,.F.);
+#227=CARTESIAN_POINT('',(0.0,-4.0,0.0));
+#228=DIRECTION('',(-1.0,0.0,0.0));
+#229=VECTOR('',#228,4.47213595499958);
+#230=LINE('',#227,#229);
+#231=EDGE_CURVE('',#164,#219,#230,.T.);
+#232=ORIENTED_EDGE('',*,*,#231,.F.);
+#233=EDGE_LOOP('',(#209,#217,#226,#232));
+#234=FACE_OUTER_BOUND('',#233,.T.);
+#235=ADVANCED_FACE('',(#234),#202,.T.);
+#236=CARTESIAN_POINT('',(4.47213595499958,4.0,0.0));
+#237=DIRECTION('',(0.0,1.0,0.0));
+#238=DIRECTION('',(0.0,0.0,1.0));
+#239=AXIS2_PLACEMENT_3D('',#236,#237,#238);
+#240=PLANE('',#239);
+#241=CARTESIAN_POINT('',(4.47213595499958,4.0,-2.0));
+#242=VERTEX_POINT('',#241);
+#243=CARTESIAN_POINT('',(-4.47213595499958,4.0,-2.0));
+#244=VERTEX_POINT('',#243);
+#245=CARTESIAN_POINT('',(4.47213595499958,4.0,-2.0));
+#246=DIRECTION('',(-1.0,0.0,0.0));
+#247=VECTOR('',#246,8.944271909999159);
+#248=LINE('',#245,#247);
+#249=EDGE_CURVE('',#242,#244,#248,.T.);
+#250=ORIENTED_EDGE('',*,*,#249,.T.);
+#251=CARTESIAN_POINT('',(-4.47213595499958,4.0,0.0));
+#252=DIRECTION('',(0.0,0.0,-1.0));
+#253=VECTOR('',#252,2.0);
+#254=LINE('',#251,#253);
+#255=EDGE_CURVE('',#211,#244,#254,.T.);
+#256=ORIENTED_EDGE('',*,*,#255,.F.);
+#257=ORIENTED_EDGE('',*,*,#216,.T.);
+#258=ORIENTED_EDGE('',*,*,#193,.T.);
+#259=CARTESIAN_POINT('',(4.47213595499958,4.0,0.0));
+#260=DIRECTION('',(0.0,0.0,-1.0));
+#261=VECTOR('',#260,2.0);
+#262=LINE('',#259,#261);
+#263=EDGE_CURVE('',#181,#242,#262,.T.);
+#264=ORIENTED_EDGE('',*,*,#263,.T.);
+#265=EDGE_LOOP('',(#250,#256,#257,#258,#264));
+#266=FACE_OUTER_BOUND('',#265,.T.);
+#267=ADVANCED_FACE('',(#266),#240,.T.);
+#268=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#269=DIRECTION('',(0.0,0.0,-1.0));
+#270=DIRECTION('',(-1.0,0.0,0.0));
+#271=AXIS2_PLACEMENT_3D('',#268,#269,#270);
+#272=CYLINDRICAL_SURFACE('',#271,6.000000000000001);
+#273=CARTESIAN_POINT('',(-4.47213595499958,-4.0,-2.0));
+#274=VERTEX_POINT('',#273);
+#275=CARTESIAN_POINT('',(0.0,0.0,-2.0));
+#276=DIRECTION('',(0.0,0.0,1.0));
+#277=DIRECTION('',(-1.0,0.0,0.0));
+#278=AXIS2_PLACEMENT_3D('',#275,#276,#277);
+#279=CIRCLE('',#278,6.000000000000001);
+#280=EDGE_CURVE('',#244,#274,#279,.T.);
+#281=ORIENTED_EDGE('',*,*,#280,.T.);
+#282=CARTESIAN_POINT('',(-4.47213595499958,-4.0,0.0));
+#283=DIRECTION('',(0.0,0.0,-1.0));
+#284=VECTOR('',#283,2.0);
+#285=LINE('',#282,#284);
+#286=EDGE_CURVE('',#219,#274,#285,.T.);
+#287=ORIENTED_EDGE('',*,*,#286,.F.);
+#288=ORIENTED_EDGE('',*,*,#225,.T.);
+#289=ORIENTED_EDGE('',*,*,#255,.T.);
+#290=EDGE_LOOP('',(#281,#287,#288,#289));
+#291=FACE_OUTER_BOUND('',#290,.T.);
+#292=ADVANCED_FACE('',(#291),#272,.T.);
+#293=CARTESIAN_POINT('',(-4.47213595499958,-4.0,0.0));
+#294=DIRECTION('',(0.0,-1.0,0.0));
+#295=DIRECTION('',(0.0,0.0,-1.0));
+#296=AXIS2_PLACEMENT_3D('',#293,#294,#295);
+#297=PLANE('',#296);
+#298=CARTESIAN_POINT('',(4.47213595499958,-4.0,-2.0));
+#299=VERTEX_POINT('',#298);
+#300=CARTESIAN_POINT('',(-4.47213595499958,-4.0,-2.0));
+#301=DIRECTION('',(1.0,0.0,0.0));
+#302=VECTOR('',#301,8.944271909999159);
+#303=LINE('',#300,#302);
+#304=EDGE_CURVE('',#274,#299,#303,.T.);
+#305=ORIENTED_EDGE('',*,*,#304,.T.);
+#306=CARTESIAN_POINT('',(4.47213595499958,-4.0,0.0));
+#307=DIRECTION('',(0.0,0.0,-1.0));
+#308=VECTOR('',#307,2.0);
+#309=LINE('',#306,#308);
+#310=EDGE_CURVE('',#173,#299,#309,.T.);
+#311=ORIENTED_EDGE('',*,*,#310,.F.);
+#312=ORIENTED_EDGE('',*,*,#178,.T.);
+#313=ORIENTED_EDGE('',*,*,#231,.T.);
+#314=ORIENTED_EDGE('',*,*,#286,.T.);
+#315=EDGE_LOOP('',(#305,#311,#312,#313,#314));
+#316=FACE_OUTER_BOUND('',#315,.T.);
+#317=ADVANCED_FACE('',(#316),#297,.T.);
+#318=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#319=DIRECTION('',(0.0,0.0,-1.0));
+#320=DIRECTION('',(-1.0,0.0,0.0));
+#321=AXIS2_PLACEMENT_3D('',#318,#319,#320);
+#322=CYLINDRICAL_SURFACE('',#321,6.000000000000001);
+#323=CARTESIAN_POINT('',(0.0,0.0,-2.0));
+#324=DIRECTION('',(0.0,0.0,1.0));
+#325=DIRECTION('',(-1.0,0.0,0.0));
+#326=AXIS2_PLACEMENT_3D('',#323,#324,#325);
+#327=CIRCLE('',#326,6.000000000000001);
+#328=EDGE_CURVE('',#299,#242,#327,.T.);
+#329=ORIENTED_EDGE('',*,*,#328,.T.);
+#330=ORIENTED_EDGE('',*,*,#263,.F.);
+#331=ORIENTED_EDGE('',*,*,#187,.T.);
+#332=ORIENTED_EDGE('',*,*,#310,.T.);
+#333=EDGE_LOOP('',(#329,#330,#331,#332));
+#334=FACE_OUTER_BOUND('',#333,.T.);
+#335=ADVANCED_FACE('',(#334),#322,.T.);
+#336=CARTESIAN_POINT('',(-2.010567E-016,1.387779E-016,-2.0));
+#337=DIRECTION('',(0.0,0.0,1.0));
+#338=DIRECTION('',(1.0,0.0,0.0));
+#339=AXIS2_PLACEMENT_3D('',#336,#337,#338);
+#340=PLANE('',#339);
+#341=ORIENTED_EDGE('',*,*,#249,.F.);
+#342=ORIENTED_EDGE('',*,*,#328,.F.);
+#343=ORIENTED_EDGE('',*,*,#304,.F.);
+#344=ORIENTED_EDGE('',*,*,#280,.F.);
+#345=EDGE_LOOP('',(#341,#342,#343,#344));
+#346=FACE_OUTER_BOUND('',#345,.T.);
+#347=ADVANCED_FACE('',(#346),#340,.F.);
+#348=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#349=DIRECTION('',(0.0,0.0,1.0));
+#350=DIRECTION('',(-1.0,0.0,0.0));
+#351=AXIS2_PLACEMENT_3D('',#348,#349,#350);
+#352=CYLINDRICAL_SURFACE('',#351,4.0);
+#353=CARTESIAN_POINT('',(4.0,4.898587E-016,33.0));
+#354=VERTEX_POINT('',#353);
+#355=CARTESIAN_POINT('',(0.0,0.0,33.0));
+#356=DIRECTION('',(0.0,0.0,-1.0));
+#357=DIRECTION('',(-1.0,0.0,0.0));
+#358=AXIS2_PLACEMENT_3D('',#355,#356,#357);
+#359=CIRCLE('',#358,4.0);
+#360=EDGE_CURVE('',#354,#354,#359,.T.);
+#361=ORIENTED_EDGE('',*,*,#360,.T.);
+#362=EDGE_LOOP('',(#361));
+#363=FACE_OUTER_BOUND('',#362,.T.);
+#364=ORIENTED_EDGE('',*,*,#110,.T.);
+#365=EDGE_LOOP('',(#364));
+#366=FACE_BOUND('',#365,.T.);
+#367=ORIENTED_EDGE('',*,*,#151,.T.);
+#368=EDGE_LOOP('',(#367));
+#369=FACE_BOUND('',#368,.T.);
+#370=ORIENTED_EDGE('',*,*,#170,.F.);
+#371=ORIENTED_EDGE('',*,*,#208,.F.);
+#372=EDGE_LOOP('',(#370,#371));
+#373=FACE_BOUND('',#372,.T.);
+#374=ADVANCED_FACE('',(#363,#366,#369,#373),#352,.T.);
+#375=CARTESIAN_POINT('',(0.0,0.0,33.0));
+#376=DIRECTION('',(0.0,0.0,-1.0));
+#377=DIRECTION('',(-1.0,0.0,0.0));
+#378=AXIS2_PLACEMENT_3D('',#375,#376,#377);
+#379=PLANE('',#378);
+#380=ORIENTED_EDGE('',*,*,#360,.F.);
+#381=EDGE_LOOP('',(#380));
+#382=FACE_OUTER_BOUND('',#381,.T.);
+#383=ADVANCED_FACE('',(#382),#379,.F.);
+#384=CLOSED_SHELL('',(#155,#197,#235,#267,#292,#317,#335,#347,#374,#383));
+#385=MANIFOLD_SOLID_BREP('Solid1',#384);
+#386=COLOUR_RGB('PTFE',0.917647004127502,0.921568989753723,0.933332979679108);
+#387=FILL_AREA_STYLE_COLOUR('PTFE',#386);
+#388=FILL_AREA_STYLE('PTFE',(#387));
+#389=SURFACE_STYLE_FILL_AREA(#388);
+#390=SURFACE_SIDE_STYLE('PTFE',(#389));
+#391=SURFACE_STYLE_USAGE(.BOTH.,#390);
+#392=PRESENTATION_STYLE_ASSIGNMENT((#391));
+#393=STYLED_ITEM('',(#392),#385);
+#394=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#393),#36);
+#395=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#385),#36);
+#396=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#395,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM422_Songbird_22lr_Pistol-JamesRPatrick/STEP/PM422Trigger1.stp

@@ -0,0 +1,934 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM422\\PM422Trigger1.stp','2015-05-10T23:38:08',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM422Trigger1','PM422Trigger1',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(-1.397008570622569,-32.0,0.0));
+#69=DIRECTION('',(0.0,0.0,1.0));
+#70=DIRECTION('',(0.647317425929788,-0.762220539009304,0.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=CYLINDRICAL_SURFACE('',#71,4.0);
+#73=CARTESIAN_POINT('',(2.550180527795977,-32.647841200701066,5.0));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(-1.397008570622569,-36.0,5.0));
+#76=VERTEX_POINT('',#75);
+#77=CARTESIAN_POINT('',(-1.397008570622569,-32.0,5.0));
+#78=DIRECTION('',(0.0,0.0,-1.0));
+#79=DIRECTION('',(0.647317425929788,-0.762220539009304,0.0));
+#80=AXIS2_PLACEMENT_3D('',#77,#78,#79);
+#81=CIRCLE('',#80,4.0);
+#82=EDGE_CURVE('',#74,#76,#81,.T.);
+#83=ORIENTED_EDGE('',*,*,#82,.T.);
+#84=CARTESIAN_POINT('',(-1.397008570622569,-36.0,-5.0));
+#85=VERTEX_POINT('',#84);
+#86=CARTESIAN_POINT('',(-1.397008570622569,-36.0,5.0));
+#87=DIRECTION('',(0.0,0.0,-1.0));
+#88=VECTOR('',#87,10.0);
+#89=LINE('',#86,#88);
+#90=EDGE_CURVE('',#76,#85,#89,.T.);
+#91=ORIENTED_EDGE('',*,*,#90,.T.);
+#92=CARTESIAN_POINT('',(2.550180527795977,-32.647841200701066,-5.0));
+#93=VERTEX_POINT('',#92);
+#94=CARTESIAN_POINT('',(-1.397008570622569,-32.0,-5.0));
+#95=DIRECTION('',(0.0,0.0,1.0));
+#96=DIRECTION('',(0.647317425929788,-0.762220539009304,0.0));
+#97=AXIS2_PLACEMENT_3D('',#94,#95,#96);
+#98=CIRCLE('',#97,4.0);
+#99=EDGE_CURVE('',#85,#93,#98,.T.);
+#100=ORIENTED_EDGE('',*,*,#99,.T.);
+#101=CARTESIAN_POINT('',(2.550180527795977,-32.647841200701066,-5.0));
+#102=DIRECTION('',(0.0,0.0,1.0));
+#103=VECTOR('',#102,10.0);
+#104=LINE('',#101,#103);
+#105=EDGE_CURVE('',#93,#74,#104,.T.);
+#106=ORIENTED_EDGE('',*,*,#105,.T.);
+#107=EDGE_LOOP('',(#83,#91,#100,#106));
+#108=FACE_OUTER_BOUND('',#107,.T.);
+#109=ADVANCED_FACE('',(#108),#72,.T.);
+#110=CARTESIAN_POINT('',(-0.623903238341491,-18.604209300430878,-5.0));
+#111=DIRECTION('',(0.0,0.0,1.0));
+#112=DIRECTION('',(1.0,0.0,0.0));
+#113=AXIS2_PLACEMENT_3D('',#110,#111,#112);
+#114=PLANE('',#113);
+#115=ORIENTED_EDGE('',*,*,#99,.F.);
+#116=CARTESIAN_POINT('',(-3.617232261826509,-36.0,-5.0));
+#117=VERTEX_POINT('',#116);
+#118=CARTESIAN_POINT('',(-3.617232261826509,-36.0,-5.0));
+#119=DIRECTION('',(1.0,0.0,0.0));
+#120=VECTOR('',#119,2.22022369120394);
+#121=LINE('',#118,#120);
+#122=EDGE_CURVE('',#117,#85,#121,.T.);
+#123=ORIENTED_EDGE('',*,*,#122,.F.);
+#124=CARTESIAN_POINT('',(-1.539601207991413,-7.850454007275719,-5.0));
+#125=VERTEX_POINT('',#124);
+#126=CARTESIAN_POINT('',(-44.140558418599824,-18.857653684755597,-5.0));
+#127=DIRECTION('',(0.0,0.0,-1.0));
+#128=DIRECTION('',(0.999808427003285,-0.019573177902836,0.0));
+#129=AXIS2_PLACEMENT_3D('',#126,#127,#128);
+#130=CIRCLE('',#129,44.000000000000021);
+#131=EDGE_CURVE('',#125,#117,#130,.T.);
+#132=ORIENTED_EDGE('',*,*,#131,.F.);
+#133=CARTESIAN_POINT('',(7.416198487095663,-3.0,-5.0));
+#134=VERTEX_POINT('',#133);
+#135=CARTESIAN_POINT('',(0.0,0.0,-5.0));
+#136=DIRECTION('',(0.0,0.0,-1.0));
+#137=DIRECTION('',(1.0,0.0,0.0));
+#138=AXIS2_PLACEMENT_3D('',#135,#136,#137);
+#139=CIRCLE('',#138,8.0);
+#140=EDGE_CURVE('',#134,#125,#139,.T.);
+#141=ORIENTED_EDGE('',*,*,#140,.F.);
+#142=CARTESIAN_POINT('',(2.550180527795977,-32.647841200701066,-5.0));
+#143=DIRECTION('',(0.161960300175265,0.986797274604636,0.0));
+#144=VECTOR('',#143,30.044510624109261);
+#145=LINE('',#142,#144);
+#146=EDGE_CURVE('',#93,#134,#145,.T.);
+#147=ORIENTED_EDGE('',*,*,#146,.F.);
+#148=EDGE_LOOP('',(#115,#123,#132,#141,#147));
+#149=FACE_OUTER_BOUND('',#148,.T.);
+#150=ADVANCED_FACE('',(#149),#114,.F.);
+#151=CARTESIAN_POINT('',(1.999999999999997,-36.0,0.0));
+#152=DIRECTION('',(0.0,-1.0,0.0));
+#153=DIRECTION('',(0.0,0.0,-1.0));
+#154=AXIS2_PLACEMENT_3D('',#151,#152,#153);
+#155=PLANE('',#154);
+#156=ORIENTED_EDGE('',*,*,#90,.F.);
+#157=CARTESIAN_POINT('',(-3.617232261826509,-36.0,5.0));
+#158=VERTEX_POINT('',#157);
+#159=CARTESIAN_POINT('',(-1.397008570622569,-36.0,5.0));
+#160=DIRECTION('',(-1.0,0.0,0.0));
+#161=VECTOR('',#160,2.22022369120394);
+#162=LINE('',#159,#161);
+#163=EDGE_CURVE('',#76,#158,#162,.T.);
+#164=ORIENTED_EDGE('',*,*,#163,.T.);
+#165=CARTESIAN_POINT('',(-7.859469290293787,-36.0,1.999999999857893));
+#166=VERTEX_POINT('',#165);
+#167=CARTESIAN_POINT('',(-7.859469290293787,-36.0,1.999999999715786));
+#168=CARTESIAN_POINT('',(-7.811399079706971,-36.0,2.16833138517117));
+#169=CARTESIAN_POINT('',(-7.751906634004736,-36.000000000000007,2.330213510825172));
+#170=CARTESIAN_POINT('',(-7.585214457115979,-36.0,2.709408880942079));
+#171=CARTESIAN_POINT('',(-7.449957733583199,-36.0,2.950442647342205));
+#172=CARTESIAN_POINT('',(-7.130431648670445,-36.0,3.397847928415335));
+#173=CARTESIAN_POINT('',(-6.946290269339182,-36.0,3.604310830968425));
+#174=CARTESIAN_POINT('',(-6.568680289293952,-36.0,3.960080342867292));
+#175=CARTESIAN_POINT('',(-6.338436609905624,-36.000000000000007,4.140135591754298));
+#176=CARTESIAN_POINT('',(-5.845759278650502,-36.000000000000007,4.449368509033617));
+#177=CARTESIAN_POINT('',(-5.583389829464817,-36.0,4.578648454894321));
+#178=CARTESIAN_POINT('',(-5.0781206352287,-36.0,4.77691569214204));
+#179=CARTESIAN_POINT('',(-4.787605247035106,-36.0,4.862645106095375));
+#180=CARTESIAN_POINT('',(-4.195245713401328,-36.0,4.974176792342217));
+#181=CARTESIAN_POINT('',(-3.893405509941992,-36.0,4.999999999999999));
+#182=CARTESIAN_POINT('',(-3.617232261826509,-36.0,5.0));
+#183=B_SPLINE_CURVE_WITH_KNOTS('',3,(#167,#168,#169,#170,#171,#172,#173,#174,#175,#176,#177,#178,#179,#180,#181,#182),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,2,2,2,4),(1.331563419398634,1.380167271494487,1.45582840622059,1.531489540946693,1.61147066216796,1.691451783389226,1.774303757823871,1.857155732258516),.UNSPECIFIED.);
+#184=EDGE_CURVE('',#166,#158,#183,.T.);
+#185=ORIENTED_EDGE('',*,*,#184,.F.);
+#186=CARTESIAN_POINT('',(-1.645751311064586,-36.0,2.0));
+#187=VERTEX_POINT('',#186);
+#188=CARTESIAN_POINT('',(-7.859469290293788,-36.0,2.0));
+#189=DIRECTION('',(1.0,0.0,0.0));
+#190=VECTOR('',#189,6.213717979229203);
+#191=LINE('',#188,#190);
+#192=EDGE_CURVE('',#166,#187,#191,.T.);
+#193=ORIENTED_EDGE('',*,*,#192,.T.);
+#194=CARTESIAN_POINT('',(-1.645751311064586,-36.0,-2.0));
+#195=VERTEX_POINT('',#194);
+#196=CARTESIAN_POINT('',(-1.645751311064586,-36.0,2.0));
+#197=DIRECTION('',(0.0,0.0,-1.0));
+#198=VECTOR('',#197,4.0);
+#199=LINE('',#196,#198);
+#200=EDGE_CURVE('',#187,#195,#199,.T.);
+#201=ORIENTED_EDGE('',*,*,#200,.T.);
+#202=CARTESIAN_POINT('',(-7.859469290293788,-36.0,-1.999999999857893));
+#203=VERTEX_POINT('',#202);
+#204=CARTESIAN_POINT('',(-1.645751311064586,-36.0,-2.0));
+#205=DIRECTION('',(-1.0,0.0,0.0));
+#206=VECTOR('',#205,6.213717979229202);
+#207=LINE('',#204,#206);
+#208=EDGE_CURVE('',#195,#203,#207,.T.);
+#209=ORIENTED_EDGE('',*,*,#208,.T.);
+#210=CARTESIAN_POINT('',(-3.617232261826509,-36.0,-5.0));
+#211=CARTESIAN_POINT('',(-3.893405509941992,-36.0,-4.999999999999999));
+#212=CARTESIAN_POINT('',(-4.195245713401329,-36.0,-4.974176792342217));
+#213=CARTESIAN_POINT('',(-4.787605247035107,-36.0,-4.862645106095375));
+#214=CARTESIAN_POINT('',(-5.0781206352287,-36.0,-4.776915692142038));
+#215=CARTESIAN_POINT('',(-5.583389829464817,-36.0,-4.57864845489432));
+#216=CARTESIAN_POINT('',(-5.845759278650503,-36.000000000000007,-4.449368509033618));
+#217=CARTESIAN_POINT('',(-6.338436609905625,-36.000000000000007,-4.140135591754298));
+#218=CARTESIAN_POINT('',(-6.568680289293952,-36.0,-3.960080342867291));
+#219=CARTESIAN_POINT('',(-6.946290269339183,-36.0,-3.604310830968424));
+#220=CARTESIAN_POINT('',(-7.130431648670442,-36.0,-3.397847928415329));
+#221=CARTESIAN_POINT('',(-7.449957733583196,-36.0,-2.950442647342196));
+#222=CARTESIAN_POINT('',(-7.585214457115981,-36.0,-2.709408880942074));
+#223=CARTESIAN_POINT('',(-7.751906634004734,-36.0,-2.330213510825167));
+#224=CARTESIAN_POINT('',(-7.811399079706972,-36.0,-2.168331385171169));
+#225=CARTESIAN_POINT('',(-7.859469290293787,-36.0,-1.999999999715787));
+#226=B_SPLINE_CURVE_WITH_KNOTS('',3,(#210,#211,#212,#213,#214,#215,#216,#217,#218,#219,#220,#221,#222,#223,#224,#225),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,2,2,2,4),(0.615963528935658,0.698815503370303,0.781667477804948,0.861648599026214,0.941629720247481,1.017290854973584,1.092951989699687,1.14155584179554),.UNSPECIFIED.);
+#227=EDGE_CURVE('',#117,#203,#226,.T.);
+#228=ORIENTED_EDGE('',*,*,#227,.F.);
+#229=ORIENTED_EDGE('',*,*,#122,.T.);
+#230=EDGE_LOOP('',(#156,#164,#185,#193,#201,#209,#228,#229));
+#231=FACE_OUTER_BOUND('',#230,.T.);
+#232=ADVANCED_FACE('',(#231),#155,.T.);
+#233=CARTESIAN_POINT('',(-1.239826578368419,-22.647775569581139,2.0));
+#234=DIRECTION('',(0.0,0.0,1.0));
+#235=DIRECTION('',(1.0,0.0,0.0));
+#236=AXIS2_PLACEMENT_3D('',#233,#234,#235);
+#237=PLANE('',#236);
+#238=ORIENTED_EDGE('',*,*,#192,.F.);
+#239=CARTESIAN_POINT('',(-6.749295825883461,-4.294997771211539,2.0));
+#240=VERTEX_POINT('',#239);
+#241=CARTESIAN_POINT('',(-44.140558418599824,-18.857653684755597,2.0));
+#242=DIRECTION('',(0.0,0.0,-1.0));
+#243=DIRECTION('',(1.0,0.0,0.0));
+#244=AXIS2_PLACEMENT_3D('',#241,#242,#243);
+#245=CIRCLE('',#244,40.127016653792609);
+#246=EDGE_CURVE('',#240,#166,#245,.T.);
+#247=ORIENTED_EDGE('',*,*,#246,.F.);
+#248=CARTESIAN_POINT('',(-7.356759736433304,-3.1429422807926,2.0));
+#249=VERTEX_POINT('',#248);
+#250=CARTESIAN_POINT('',(0.0,0.0,2.0));
+#251=DIRECTION('',(0.0,0.0,1.0));
+#252=DIRECTION('',(1.0,0.0,0.0));
+#253=AXIS2_PLACEMENT_3D('',#250,#251,#252);
+#254=CIRCLE('',#253,8.0);
+#255=EDGE_CURVE('',#249,#240,#254,.T.);
+#256=ORIENTED_EDGE('',*,*,#255,.F.);
+#257=CARTESIAN_POINT('',(-8.000000000000004,-36.0,2.0));
+#258=VERTEX_POINT('',#257);
+#259=CARTESIAN_POINT('',(-44.140558418599824,-18.857653684755597,2.0));
+#260=DIRECTION('',(0.0,0.0,1.0));
+#261=DIRECTION('',(-0.903513960464996,0.42855865788111,0.0));
+#262=AXIS2_PLACEMENT_3D('',#259,#260,#261);
+#263=CIRCLE('',#262,40.0);
+#264=EDGE_CURVE('',#258,#249,#263,.T.);
+#265=ORIENTED_EDGE('',*,*,#264,.F.);
+#266=CARTESIAN_POINT('',(-8.0,-44.0,2.0));
+#267=VERTEX_POINT('',#266);
+#268=CARTESIAN_POINT('',(-8.000000000000002,-44.0,2.0));
+#269=DIRECTION('',(0.0,1.0,0.0));
+#270=VECTOR('',#269,8.0);
+#271=LINE('',#268,#270);
+#272=EDGE_CURVE('',#267,#258,#271,.T.);
+#273=ORIENTED_EDGE('',*,*,#272,.F.);
+#274=CARTESIAN_POINT('',(2.775558E-016,-44.0,2.0));
+#275=VERTEX_POINT('',#274);
+#276=CARTESIAN_POINT('',(0.0,-44.0,2.0));
+#277=DIRECTION('',(-1.0,0.0,0.0));
+#278=VECTOR('',#277,8.0);
+#279=LINE('',#276,#278);
+#280=EDGE_CURVE('',#275,#267,#279,.T.);
+#281=ORIENTED_EDGE('',*,*,#280,.F.);
+#282=CARTESIAN_POINT('',(-2.775558E-016,-42.87298334620742,2.0));
+#283=VERTEX_POINT('',#282);
+#284=CARTESIAN_POINT('',(-2.775558E-016,-42.872983346207413,2.0));
+#285=DIRECTION('',(0.0,-1.0,0.0));
+#286=VECTOR('',#285,1.127016653792587);
+#287=LINE('',#284,#286);
+#288=EDGE_CURVE('',#283,#275,#287,.T.);
+#289=ORIENTED_EDGE('',*,*,#288,.F.);
+#290=CARTESIAN_POINT('',(1.0,-39.0,2.0));
+#291=DIRECTION('',(0.0,0.0,1.0));
+#292=DIRECTION('',(-0.284261052861449,-0.958746918548425,0.0));
+#293=AXIS2_PLACEMENT_3D('',#290,#291,#292);
+#294=CIRCLE('',#293,4.0);
+#295=EDGE_CURVE('',#187,#283,#294,.T.);
+#296=ORIENTED_EDGE('',*,*,#295,.F.);
+#297=EDGE_LOOP('',(#238,#247,#256,#265,#273,#281,#289,#296));
+#298=FACE_OUTER_BOUND('',#297,.T.);
+#299=ADVANCED_FACE('',(#298),#237,.T.);
+#300=CARTESIAN_POINT('',(-1.239826578368419,-22.647775569581128,-2.0));
+#301=DIRECTION('',(0.0,0.0,1.0));
+#302=DIRECTION('',(1.0,0.0,0.0));
+#303=AXIS2_PLACEMENT_3D('',#300,#301,#302);
+#304=PLANE('',#303);
+#305=ORIENTED_EDGE('',*,*,#208,.F.);
+#306=CARTESIAN_POINT('',(-2.775558E-016,-42.87298334620742,-2.0));
+#307=VERTEX_POINT('',#306);
+#308=CARTESIAN_POINT('',(1.0,-39.0,-2.0));
+#309=DIRECTION('',(0.0,0.0,-1.0));
+#310=DIRECTION('',(-0.284261052861449,-0.958746918548425,0.0));
+#311=AXIS2_PLACEMENT_3D('',#308,#309,#310);
+#312=CIRCLE('',#311,4.0);
+#313=EDGE_CURVE('',#307,#195,#312,.T.);
+#314=ORIENTED_EDGE('',*,*,#313,.F.);
+#315=CARTESIAN_POINT('',(2.775558E-016,-44.0,-2.0));
+#316=VERTEX_POINT('',#315);
+#317=CARTESIAN_POINT('',(2.775558E-016,-44.0,-2.0));
+#318=DIRECTION('',(0.0,1.0,0.0));
+#319=VECTOR('',#318,1.127016653792587);
+#320=LINE('',#317,#319);
+#321=EDGE_CURVE('',#316,#307,#320,.T.);
+#322=ORIENTED_EDGE('',*,*,#321,.F.);
+#323=CARTESIAN_POINT('',(-8.0,-44.0,-2.0));
+#324=VERTEX_POINT('',#323);
+#325=CARTESIAN_POINT('',(-8.0,-44.0,-2.0));
+#326=DIRECTION('',(1.0,0.0,0.0));
+#327=VECTOR('',#326,8.0);
+#328=LINE('',#325,#327);
+#329=EDGE_CURVE('',#324,#316,#328,.T.);
+#330=ORIENTED_EDGE('',*,*,#329,.F.);
+#331=CARTESIAN_POINT('',(-8.000000000000004,-36.0,-2.0));
+#332=VERTEX_POINT('',#331);
+#333=CARTESIAN_POINT('',(-8.000000000000004,-36.0,-2.0));
+#334=DIRECTION('',(0.0,-1.0,0.0));
+#335=VECTOR('',#334,8.0);
+#336=LINE('',#333,#335);
+#337=EDGE_CURVE('',#332,#324,#336,.T.);
+#338=ORIENTED_EDGE('',*,*,#337,.F.);
+#339=CARTESIAN_POINT('',(-7.356759736433304,-3.1429422807926,-2.0));
+#340=VERTEX_POINT('',#339);
+#341=CARTESIAN_POINT('',(-44.140558418599824,-18.857653684755597,-2.0));
+#342=DIRECTION('',(0.0,0.0,-1.0));
+#343=DIRECTION('',(-0.903513960464996,0.42855865788111,0.0));
+#344=AXIS2_PLACEMENT_3D('',#341,#342,#343);
+#345=CIRCLE('',#344,40.0);
+#346=EDGE_CURVE('',#340,#332,#345,.T.);
+#347=ORIENTED_EDGE('',*,*,#346,.F.);
+#348=CARTESIAN_POINT('',(-6.749295825883461,-4.294997771211539,-2.0));
+#349=VERTEX_POINT('',#348);
+#350=CARTESIAN_POINT('',(0.0,0.0,-2.0));
+#351=DIRECTION('',(0.0,0.0,-1.0));
+#352=DIRECTION('',(1.0,0.0,0.0));
+#353=AXIS2_PLACEMENT_3D('',#350,#351,#352);
+#354=CIRCLE('',#353,8.0);
+#355=EDGE_CURVE('',#349,#340,#354,.T.);
+#356=ORIENTED_EDGE('',*,*,#355,.F.);
+#357=CARTESIAN_POINT('',(-44.140558418599824,-18.857653684755597,-2.0));
+#358=DIRECTION('',(0.0,0.0,1.0));
+#359=DIRECTION('',(-1.0,0.0,0.0));
+#360=AXIS2_PLACEMENT_3D('',#357,#358,#359);
+#361=CIRCLE('',#360,40.127016653792609);
+#362=EDGE_CURVE('',#203,#349,#361,.T.);
+#363=ORIENTED_EDGE('',*,*,#362,.F.);
+#364=EDGE_LOOP('',(#305,#314,#322,#330,#338,#347,#356,#363));
+#365=FACE_OUTER_BOUND('',#364,.T.);
+#366=ADVANCED_FACE('',(#365),#304,.F.);
+#367=CARTESIAN_POINT('',(1.0,-39.0,0.0));
+#368=DIRECTION('',(0.0,0.0,1.0));
+#369=DIRECTION('',(-0.284261052861449,-0.958746918548425,0.0));
+#370=AXIS2_PLACEMENT_3D('',#367,#368,#369);
+#371=CYLINDRICAL_SURFACE('',#370,4.0);
+#372=ORIENTED_EDGE('',*,*,#200,.F.);
+#373=ORIENTED_EDGE('',*,*,#295,.T.);
+#374=CARTESIAN_POINT('',(-2.775558E-016,-42.87298334620742,-2.0));
+#375=DIRECTION('',(0.0,0.0,1.0));
+#376=VECTOR('',#375,4.0);
+#377=LINE('',#374,#376);
+#378=EDGE_CURVE('',#307,#283,#377,.T.);
+#379=ORIENTED_EDGE('',*,*,#378,.F.);
+#380=ORIENTED_EDGE('',*,*,#313,.T.);
+#381=EDGE_LOOP('',(#372,#373,#379,#380));
+#382=FACE_OUTER_BOUND('',#381,.T.);
+#383=ADVANCED_FACE('',(#382),#371,.F.);
+#384=CARTESIAN_POINT('',(-2.775558E-016,-42.87298334620742,0.0));
+#385=DIRECTION('',(1.0,0.0,0.0));
+#386=DIRECTION('',(0.0,0.0,-1.0));
+#387=AXIS2_PLACEMENT_3D('',#384,#385,#386);
+#388=PLANE('',#387);
+#389=ORIENTED_EDGE('',*,*,#288,.T.);
+#390=CARTESIAN_POINT('',(2.775558E-016,-44.0,-2.0));
+#391=DIRECTION('',(0.0,0.0,1.0));
+#392=VECTOR('',#391,4.0);
+#393=LINE('',#390,#392);
+#394=EDGE_CURVE('',#316,#275,#393,.T.);
+#395=ORIENTED_EDGE('',*,*,#394,.F.);
+#396=ORIENTED_EDGE('',*,*,#321,.T.);
+#397=ORIENTED_EDGE('',*,*,#378,.T.);
+#398=EDGE_LOOP('',(#389,#395,#396,#397));
+#399=FACE_OUTER_BOUND('',#398,.T.);
+#400=ADVANCED_FACE('',(#399),#388,.T.);
+#401=CARTESIAN_POINT('',(2.775558E-016,-44.0,0.0));
+#402=DIRECTION('',(0.0,-1.0,0.0));
+#403=DIRECTION('',(0.0,0.0,-1.0));
+#404=AXIS2_PLACEMENT_3D('',#401,#402,#403);
+#405=PLANE('',#404);
+#406=ORIENTED_EDGE('',*,*,#280,.T.);
+#407=CARTESIAN_POINT('',(-8.0,-44.0,-2.0));
+#408=DIRECTION('',(0.0,0.0,1.0));
+#409=VECTOR('',#408,4.0);
+#410=LINE('',#407,#409);
+#411=EDGE_CURVE('',#324,#267,#410,.T.);
+#412=ORIENTED_EDGE('',*,*,#411,.F.);
+#413=ORIENTED_EDGE('',*,*,#329,.T.);
+#414=ORIENTED_EDGE('',*,*,#394,.T.);
+#415=EDGE_LOOP('',(#406,#412,#413,#414));
+#416=FACE_OUTER_BOUND('',#415,.T.);
+#417=ADVANCED_FACE('',(#416),#405,.T.);
+#418=CARTESIAN_POINT('',(-8.0,-44.0,0.0));
+#419=DIRECTION('',(-1.0,0.0,0.0));
+#420=DIRECTION('',(0.0,0.0,1.0));
+#421=AXIS2_PLACEMENT_3D('',#418,#419,#420);
+#422=PLANE('',#421);
+#423=ORIENTED_EDGE('',*,*,#272,.T.);
+#424=CARTESIAN_POINT('',(-8.000000000000004,-36.0,2.0));
+#425=DIRECTION('',(0.0,0.0,-1.0));
+#426=VECTOR('',#425,4.0);
+#427=LINE('',#424,#426);
+#428=EDGE_CURVE('',#258,#332,#427,.T.);
+#429=ORIENTED_EDGE('',*,*,#428,.T.);
+#430=ORIENTED_EDGE('',*,*,#337,.T.);
+#431=ORIENTED_EDGE('',*,*,#411,.T.);
+#432=EDGE_LOOP('',(#423,#429,#430,#431));
+#433=FACE_OUTER_BOUND('',#432,.T.);
+#434=ADVANCED_FACE('',(#433),#422,.T.);
+#435=CARTESIAN_POINT('',(-44.140558418599824,-18.857653684755597,-1.0));
+#436=DIRECTION('',(0.0,0.0,-1.0));
+#437=DIRECTION('',(-1.0,0.0,0.0));
+#438=AXIS2_PLACEMENT_3D('',#435,#436,#437);
+#439=TOROIDAL_SURFACE('',#438,44.000000000000021,4.0);
+#440=ORIENTED_EDGE('',*,*,#362,.T.);
+#441=CARTESIAN_POINT('',(-1.53960120799141,-7.850454007275712,-5.0));
+#442=CARTESIAN_POINT('',(-2.106751065099387,-7.739226732482898,-5.0));
+#443=CARTESIAN_POINT('',(-2.653602123202834,-7.567490776976942,-4.899064307092474));
+#444=CARTESIAN_POINT('',(-3.815132039205893,-7.067368686458463,-4.52052975262415));
+#445=CARTESIAN_POINT('',(-4.442073495770103,-6.694754052832382,-4.189599377052992));
+#446=CARTESIAN_POINT('',(-5.540539589148043,-5.809366097081976,-3.380353698143152));
+#447=CARTESIAN_POINT('',(-5.990075126211049,-5.339509826210964,-2.943767910326339));
+#448=CARTESIAN_POINT('',(-6.503744900394537,-4.66380910503132,-2.330443398923898));
+#449=CARTESIAN_POINT('',(-6.630643886550587,-4.481451194829702,-2.166135518936466));
+#450=CARTESIAN_POINT('',(-6.749295825889342,-4.2949977712023,-1.999999999991785));
+#451=B_SPLINE_CURVE_WITH_KNOTS('',3,(#441,#442,#443,#444,#445,#446,#447,#448,#449,#450),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,4),(2.434559158368491,2.634122842919363,2.888919738787654,3.118082160834554,3.199838996516867),.UNSPECIFIED.);
+#452=EDGE_CURVE('',#349,#125,#451,.F.);
+#453=ORIENTED_EDGE('',*,*,#452,.T.);
+#454=ORIENTED_EDGE('',*,*,#131,.T.);
+#455=ORIENTED_EDGE('',*,*,#227,.T.);
+#456=EDGE_LOOP('',(#440,#453,#454,#455));
+#457=FACE_OUTER_BOUND('',#456,.T.);
+#458=ADVANCED_FACE('',(#457),#439,.T.);
+#459=CARTESIAN_POINT('',(25.90934568848466,-7.2324509243441,0.0));
+#460=DIRECTION('',(0.0,0.0,1.0));
+#461=DIRECTION('',(-0.615661475325657,0.788010753606723,0.0));
+#462=AXIS2_PLACEMENT_3D('',#459,#460,#461);
+#463=CYLINDRICAL_SURFACE('',#462,1.0);
+#464=CARTESIAN_POINT('',(24.919077619743089,-7.371624025304167,-4.0));
+#465=VERTEX_POINT('',#464);
+#466=CARTESIAN_POINT('',(26.283952281900575,-6.305267069777313,-4.0));
+#467=VERTEX_POINT('',#466);
+#468=CARTESIAN_POINT('',(25.90934568848466,-7.2324509243441,-4.0));
+#469=DIRECTION('',(0.0,0.0,-1.0));
+#470=DIRECTION('',(-0.615661475325657,0.788010753606723,0.0));
+#471=AXIS2_PLACEMENT_3D('',#468,#469,#470);
+#472=CIRCLE('',#471,1.0);
+#473=EDGE_CURVE('',#465,#467,#472,.T.);
+#474=ORIENTED_EDGE('',*,*,#473,.T.);
+#475=CARTESIAN_POINT('',(26.283952281900575,-6.305267069777313,4.0));
+#476=VERTEX_POINT('',#475);
+#477=CARTESIAN_POINT('',(26.283952281900575,-6.305267069777313,-4.0));
+#478=DIRECTION('',(0.0,0.0,1.0));
+#479=VECTOR('',#478,8.0);
+#480=LINE('',#477,#479);
+#481=EDGE_CURVE('',#467,#476,#480,.T.);
+#482=ORIENTED_EDGE('',*,*,#481,.T.);
+#483=CARTESIAN_POINT('',(24.919077619743089,-7.371624025304167,4.0));
+#484=VERTEX_POINT('',#483);
+#485=CARTESIAN_POINT('',(25.90934568848466,-7.2324509243441,4.0));
+#486=DIRECTION('',(0.0,0.0,1.0));
+#487=DIRECTION('',(-0.615661475325657,0.788010753606723,0.0));
+#488=AXIS2_PLACEMENT_3D('',#485,#486,#487);
+#489=CIRCLE('',#488,1.0);
+#490=EDGE_CURVE('',#476,#484,#489,.T.);
+#491=ORIENTED_EDGE('',*,*,#490,.T.);
+#492=CARTESIAN_POINT('',(24.919077619743089,-7.371624025304167,4.0));
+#493=DIRECTION('',(0.0,0.0,-1.0));
+#494=VECTOR('',#493,8.0);
+#495=LINE('',#492,#494);
+#496=EDGE_CURVE('',#484,#465,#495,.T.);
+#497=ORIENTED_EDGE('',*,*,#496,.T.);
+#498=EDGE_LOOP('',(#474,#482,#491,#497));
+#499=FACE_OUTER_BOUND('',#498,.T.);
+#500=ADVANCED_FACE('',(#499),#463,.F.);
+#501=CARTESIAN_POINT('',(31.168309719800845,-8.278675571042037,0.0));
+#502=DIRECTION('',(-0.374606593415912,-0.927183854566787,0.0));
+#503=DIRECTION('',(0.0,0.0,-1.0));
+#504=AXIS2_PLACEMENT_3D('',#501,#502,#503);
+#505=PLANE('',#504);
+#506=ORIENTED_EDGE('',*,*,#481,.F.);
+#507=CARTESIAN_POINT('',(31.168309719800845,-8.278675571042037,-4.0));
+#508=VERTEX_POINT('',#507);
+#509=CARTESIAN_POINT('',(26.283952281900575,-6.305267069777313,-4.0));
+#510=DIRECTION('',(0.927183854566788,-0.374606593415912,0.0));
+#511=VECTOR('',#510,5.267949192431108);
+#512=LINE('',#509,#511);
+#513=EDGE_CURVE('',#467,#508,#512,.T.);
+#514=ORIENTED_EDGE('',*,*,#513,.T.);
+#515=CARTESIAN_POINT('',(31.168309719800845,-8.278675571042037,4.0));
+#516=VERTEX_POINT('',#515);
+#517=CARTESIAN_POINT('',(31.168309719800845,-8.278675571042037,-4.0));
+#518=DIRECTION('',(0.0,0.0,1.0));
+#519=VECTOR('',#518,8.0);
+#520=LINE('',#517,#519);
+#521=EDGE_CURVE('',#508,#516,#520,.T.);
+#522=ORIENTED_EDGE('',*,*,#521,.T.);
+#523=CARTESIAN_POINT('',(31.168309719800845,-8.278675571042035,4.0));
+#524=DIRECTION('',(-0.927183854566788,0.374606593415912,0.0));
+#525=VECTOR('',#524,5.267949192431108);
+#526=LINE('',#523,#525);
+#527=EDGE_CURVE('',#516,#476,#526,.T.);
+#528=ORIENTED_EDGE('',*,*,#527,.T.);
+#529=EDGE_LOOP('',(#506,#514,#522,#528));
+#530=FACE_OUTER_BOUND('',#529,.T.);
+#531=ADVANCED_FACE('',(#530),#505,.T.);
+#532=CARTESIAN_POINT('',(-44.140558418599824,-18.857653684755597,0.0));
+#533=DIRECTION('',(0.0,0.0,1.0));
+#534=DIRECTION('',(-0.903513960464996,0.42855865788111,0.0));
+#535=AXIS2_PLACEMENT_3D('',#532,#533,#534);
+#536=CYLINDRICAL_SURFACE('',#535,40.0);
+#537=ORIENTED_EDGE('',*,*,#428,.F.);
+#538=ORIENTED_EDGE('',*,*,#264,.T.);
+#539=CARTESIAN_POINT('',(-7.3567597364333,-3.142942280792598,-2.0));
+#540=DIRECTION('',(0.0,0.0,1.0));
+#541=VECTOR('',#540,4.0);
+#542=LINE('',#539,#541);
+#543=EDGE_CURVE('',#340,#249,#542,.T.);
+#544=ORIENTED_EDGE('',*,*,#543,.F.);
+#545=ORIENTED_EDGE('',*,*,#346,.T.);
+#546=EDGE_LOOP('',(#537,#538,#544,#545));
+#547=FACE_OUTER_BOUND('',#546,.T.);
+#548=ADVANCED_FACE('',(#547),#536,.F.);
+#549=CARTESIAN_POINT('',(-44.140558418599824,-18.857653684755597,1.0));
+#550=DIRECTION('',(0.0,0.0,1.0));
+#551=DIRECTION('',(1.0,0.0,0.0));
+#552=AXIS2_PLACEMENT_3D('',#549,#550,#551);
+#553=TOROIDAL_SURFACE('',#552,44.000000000000021,4.0);
+#554=ORIENTED_EDGE('',*,*,#246,.T.);
+#555=ORIENTED_EDGE('',*,*,#184,.T.);
+#556=CARTESIAN_POINT('',(-1.539601207991413,-7.850454007275719,5.0));
+#557=VERTEX_POINT('',#556);
+#558=CARTESIAN_POINT('',(-44.140558418599824,-18.857653684755597,5.0));
+#559=DIRECTION('',(0.0,0.0,1.0));
+#560=DIRECTION('',(0.999808427003285,-0.019573177902836,0.0));
+#561=AXIS2_PLACEMENT_3D('',#558,#559,#560);
+#562=CIRCLE('',#561,44.000000000000021);
+#563=EDGE_CURVE('',#158,#557,#562,.T.);
+#564=ORIENTED_EDGE('',*,*,#563,.T.);
+#565=CARTESIAN_POINT('',(-6.749295825883467,-4.294997771211532,2.000000000000013));
+#566=CARTESIAN_POINT('',(-6.541394085084614,-4.621701165744794,2.29110239402339));
+#567=CARTESIAN_POINT('',(-6.308010433952052,-4.936109668118027,2.576864858124016));
+#568=CARTESIAN_POINT('',(-5.483313933915178,-5.889115126645694,3.449900054305072));
+#569=CARTESIAN_POINT('',(-4.825229846422053,-6.436197490264357,3.961378501256268));
+#570=CARTESIAN_POINT('',(-3.576941511258576,-7.182009266056745,4.610438316155257));
+#571=CARTESIAN_POINT('',(-2.99109815962137,-7.449125653394919,4.82545305450904));
+#572=CARTESIAN_POINT('',(-2.090973652708308,-7.727040253376105,4.975722387402306));
+#573=CARTESIAN_POINT('',(-1.816592205550368,-7.796131585406961,4.999999999999999));
+#574=CARTESIAN_POINT('',(-1.539601207991413,-7.850454007275719,5.0));
+#575=B_SPLINE_CURVE_WITH_KNOTS('',3,(#565,#566,#567,#568,#569,#570,#571,#572,#573,#574),.UNSPECIFIED.,.F.,.U.,(4,2,2,2,4),(0.162186994609192,0.306716247966939,0.62310453271626,0.853685070739426,0.952019505905042),.UNSPECIFIED.);
+#576=EDGE_CURVE('',#557,#240,#575,.F.);
+#577=ORIENTED_EDGE('',*,*,#576,.T.);
+#578=EDGE_LOOP('',(#554,#555,#564,#577));
+#579=FACE_OUTER_BOUND('',#578,.T.);
+#580=ADVANCED_FACE('',(#579),#553,.T.);
+#581=CARTESIAN_POINT('',(11.325025257117083,-16.230281705593349,0.0));
+#582=DIRECTION('',(0.0,0.0,1.0));
+#583=DIRECTION('',(-0.647317425929789,0.762220539009303,0.0));
+#584=AXIS2_PLACEMENT_3D('',#581,#582,#583);
+#585=CYLINDRICAL_SURFACE('',#584,6.000000000000001);
+#586=CARTESIAN_POINT('',(5.404241609489264,-15.258519904541757,-4.0));
+#587=VERTEX_POINT('',#586);
+#588=CARTESIAN_POINT('',(11.32502525711708,-10.230281705593347,-4.0));
+#589=VERTEX_POINT('',#588);
+#590=CARTESIAN_POINT('',(11.325025257117083,-16.230281705593349,-4.0));
+#591=DIRECTION('',(0.0,0.0,-1.0));
+#592=DIRECTION('',(-0.647317425929789,0.762220539009303,0.0));
+#593=AXIS2_PLACEMENT_3D('',#590,#591,#592);
+#594=CIRCLE('',#593,6.000000000000001);
+#595=EDGE_CURVE('',#587,#589,#594,.T.);
+#596=ORIENTED_EDGE('',*,*,#595,.T.);
+#597=CARTESIAN_POINT('',(11.32502525711708,-10.230281705593347,4.0));
+#598=VERTEX_POINT('',#597);
+#599=CARTESIAN_POINT('',(11.32502525711708,-10.230281705593347,-4.0));
+#600=DIRECTION('',(0.0,0.0,1.0));
+#601=VECTOR('',#600,8.0);
+#602=LINE('',#599,#601);
+#603=EDGE_CURVE('',#589,#598,#602,.T.);
+#604=ORIENTED_EDGE('',*,*,#603,.T.);
+#605=CARTESIAN_POINT('',(5.404241609489264,-15.258519904541757,4.0));
+#606=VERTEX_POINT('',#605);
+#607=CARTESIAN_POINT('',(11.325025257117083,-16.230281705593349,4.0));
+#608=DIRECTION('',(0.0,0.0,1.0));
+#609=DIRECTION('',(-0.647317425929789,0.762220539009303,0.0));
+#610=AXIS2_PLACEMENT_3D('',#607,#608,#609);
+#611=CIRCLE('',#610,6.000000000000001);
+#612=EDGE_CURVE('',#598,#606,#611,.T.);
+#613=ORIENTED_EDGE('',*,*,#612,.T.);
+#614=CARTESIAN_POINT('',(5.404241609489264,-15.258519904541757,4.0));
+#615=DIRECTION('',(0.0,0.0,-1.0));
+#616=VECTOR('',#615,8.0);
+#617=LINE('',#614,#616);
+#618=EDGE_CURVE('',#606,#587,#617,.T.);
+#619=ORIENTED_EDGE('',*,*,#618,.T.);
+#620=EDGE_LOOP('',(#596,#604,#613,#619));
+#621=FACE_OUTER_BOUND('',#620,.T.);
+#622=ADVANCED_FACE('',(#621),#585,.F.);
+#623=CARTESIAN_POINT('',(25.320835756259331,-10.230281705593345,0.0));
+#624=DIRECTION('',(0.0,-1.0,0.0));
+#625=DIRECTION('',(0.0,0.0,-1.0));
+#626=AXIS2_PLACEMENT_3D('',#623,#624,#625);
+#627=PLANE('',#626);
+#628=ORIENTED_EDGE('',*,*,#603,.F.);
+#629=CARTESIAN_POINT('',(25.320835756259331,-10.230281705593345,-4.0));
+#630=VERTEX_POINT('',#629);
+#631=CARTESIAN_POINT('',(11.32502525711708,-10.230281705593347,-4.0));
+#632=DIRECTION('',(1.0,0.0,0.0));
+#633=VECTOR('',#632,13.995810499142252);
+#634=LINE('',#631,#633);
+#635=EDGE_CURVE('',#589,#630,#634,.T.);
+#636=ORIENTED_EDGE('',*,*,#635,.T.);
+#637=CARTESIAN_POINT('',(25.320835756259331,-10.230281705593345,4.0));
+#638=VERTEX_POINT('',#637);
+#639=CARTESIAN_POINT('',(25.320835756259331,-10.230281705593345,-4.0));
+#640=DIRECTION('',(0.0,0.0,1.0));
+#641=VECTOR('',#640,8.0);
+#642=LINE('',#639,#641);
+#643=EDGE_CURVE('',#630,#638,#642,.T.);
+#644=ORIENTED_EDGE('',*,*,#643,.T.);
+#645=CARTESIAN_POINT('',(25.320835756259331,-10.230281705593345,4.0));
+#646=DIRECTION('',(-1.0,0.0,0.0));
+#647=VECTOR('',#646,13.995810499142252);
+#648=LINE('',#645,#647);
+#649=EDGE_CURVE('',#638,#598,#648,.T.);
+#650=ORIENTED_EDGE('',*,*,#649,.T.);
+#651=EDGE_LOOP('',(#628,#636,#644,#650));
+#652=FACE_OUTER_BOUND('',#651,.T.);
+#653=ADVANCED_FACE('',(#652),#627,.T.);
+#654=CARTESIAN_POINT('',(2.996852747327298,7.417470836534301,0.0));
+#655=DIRECTION('',(0.374606593415912,0.927183854566787,0.0));
+#656=DIRECTION('',(0.0,0.0,1.0));
+#657=AXIS2_PLACEMENT_3D('',#654,#655,#656);
+#658=PLANE('',#657);
+#659=CARTESIAN_POINT('',(2.996852747327298,7.417470836534301,4.0));
+#660=VERTEX_POINT('',#659);
+#661=CARTESIAN_POINT('',(32.666736093464493,-4.569940152774887,4.0));
+#662=VERTEX_POINT('',#661);
+#663=CARTESIAN_POINT('',(2.996852747327299,7.417470836534299,4.0));
+#664=DIRECTION('',(0.927183854566787,-0.374606593415912,0.0));
+#665=VECTOR('',#664,31.999999999999996);
+#666=LINE('',#663,#665);
+#667=EDGE_CURVE('',#660,#662,#666,.T.);
+#668=ORIENTED_EDGE('',*,*,#667,.T.);
+#669=CARTESIAN_POINT('',(32.666736093464493,-4.569940152774887,-4.0));
+#670=VERTEX_POINT('',#669);
+#671=CARTESIAN_POINT('',(32.666736093464493,-4.569940152774887,-4.0));
+#672=DIRECTION('',(0.0,0.0,1.0));
+#673=VECTOR('',#672,8.0);
+#674=LINE('',#671,#673);
+#675=EDGE_CURVE('',#670,#662,#674,.T.);
+#676=ORIENTED_EDGE('',*,*,#675,.F.);
+#677=CARTESIAN_POINT('',(2.996852747327298,7.417470836534301,-4.0));
+#678=VERTEX_POINT('',#677);
+#679=CARTESIAN_POINT('',(32.666736093464493,-4.569940152774887,-4.0));
+#680=DIRECTION('',(-0.927183854566787,0.374606593415912,0.0));
+#681=VECTOR('',#680,31.999999999999996);
+#682=LINE('',#679,#681);
+#683=EDGE_CURVE('',#670,#678,#682,.T.);
+#684=ORIENTED_EDGE('',*,*,#683,.T.);
+#685=CARTESIAN_POINT('',(2.996852747327298,7.417470836534301,-4.0));
+#686=DIRECTION('',(0.0,0.0,1.0));
+#687=VECTOR('',#686,8.0);
+#688=LINE('',#685,#687);
+#689=EDGE_CURVE('',#678,#660,#688,.T.);
+#690=ORIENTED_EDGE('',*,*,#689,.T.);
+#691=EDGE_LOOP('',(#668,#676,#684,#690));
+#692=FACE_OUTER_BOUND('',#691,.T.);
+#693=ADVANCED_FACE('',(#692),#658,.T.);
+#694=CARTESIAN_POINT('',(32.666736093464493,-4.569940152774887,0.0));
+#695=DIRECTION('',(0.927183854566787,-0.374606593415913,0.0));
+#696=DIRECTION('',(0.0,0.0,-1.0));
+#697=AXIS2_PLACEMENT_3D('',#694,#695,#696);
+#698=PLANE('',#697);
+#699=CARTESIAN_POINT('',(32.666736093464493,-4.569940152774889,4.0));
+#700=DIRECTION('',(-0.374606593415912,-0.927183854566787,0.0));
+#701=VECTOR('',#700,3.999999999999998);
+#702=LINE('',#699,#701);
+#703=EDGE_CURVE('',#662,#516,#702,.T.);
+#704=ORIENTED_EDGE('',*,*,#703,.T.);
+#705=ORIENTED_EDGE('',*,*,#521,.F.);
+#706=CARTESIAN_POINT('',(31.168309719800845,-8.278675571042037,-4.0));
+#707=DIRECTION('',(0.374606593415912,0.927183854566787,0.0));
+#708=VECTOR('',#707,3.999999999999998);
+#709=LINE('',#706,#708);
+#710=EDGE_CURVE('',#508,#670,#709,.T.);
+#711=ORIENTED_EDGE('',*,*,#710,.T.);
+#712=ORIENTED_EDGE('',*,*,#675,.T.);
+#713=EDGE_LOOP('',(#704,#705,#711,#712));
+#714=FACE_OUTER_BOUND('',#713,.T.);
+#715=ADVANCED_FACE('',(#714),#698,.T.);
+#716=CARTESIAN_POINT('',(24.678022737833341,-5.656429417130655,0.0));
+#717=DIRECTION('',(0.99026806874157,0.139173100960066,0.0));
+#718=DIRECTION('',(0.0,0.0,-1.0));
+#719=AXIS2_PLACEMENT_3D('',#716,#717,#718);
+#720=PLANE('',#719);
+#721=ORIENTED_EDGE('',*,*,#496,.F.);
+#722=CARTESIAN_POINT('',(24.919077619743089,-7.371624025304167,4.0));
+#723=DIRECTION('',(0.139173100960065,-0.99026806874157,0.0));
+#724=VECTOR('',#723,2.886751345948125);
+#725=LINE('',#722,#724);
+#726=EDGE_CURVE('',#484,#638,#725,.T.);
+#727=ORIENTED_EDGE('',*,*,#726,.T.);
+#728=ORIENTED_EDGE('',*,*,#643,.F.);
+#729=CARTESIAN_POINT('',(25.320835756259331,-10.230281705593345,-4.0));
+#730=DIRECTION('',(-0.139173100960065,0.99026806874157,0.0));
+#731=VECTOR('',#730,2.886751345948125);
+#732=LINE('',#729,#731);
+#733=EDGE_CURVE('',#630,#465,#732,.T.);
+#734=ORIENTED_EDGE('',*,*,#733,.T.);
+#735=EDGE_LOOP('',(#721,#727,#728,#734));
+#736=FACE_OUTER_BOUND('',#735,.T.);
+#737=ADVANCED_FACE('',(#736),#720,.T.);
+#738=CARTESIAN_POINT('',(14.591282227665296,-8.124461394538905,-4.0));
+#739=DIRECTION('',(0.0,0.0,1.0));
+#740=DIRECTION('',(1.0,0.0,0.0));
+#741=AXIS2_PLACEMENT_3D('',#738,#739,#740);
+#742=PLANE('',#741);
+#743=CARTESIAN_POINT('',(7.416198487095663,-3.0,-4.0));
+#744=VERTEX_POINT('',#743);
+#745=CARTESIAN_POINT('',(7.416198487095663,-3.0,-4.0));
+#746=DIRECTION('',(-0.161960300175265,-0.986797274604636,0.0));
+#747=VECTOR('',#746,12.422531172325314);
+#748=LINE('',#745,#747);
+#749=EDGE_CURVE('',#744,#587,#748,.T.);
+#750=ORIENTED_EDGE('',*,*,#749,.F.);
+#751=CARTESIAN_POINT('',(0.0,0.0,-4.0));
+#752=DIRECTION('',(0.0,0.0,-1.0));
+#753=DIRECTION('',(1.0,0.0,0.0));
+#754=AXIS2_PLACEMENT_3D('',#751,#752,#753);
+#755=CIRCLE('',#754,8.0);
+#756=EDGE_CURVE('',#678,#744,#755,.T.);
+#757=ORIENTED_EDGE('',*,*,#756,.F.);
+#758=ORIENTED_EDGE('',*,*,#683,.F.);
+#759=ORIENTED_EDGE('',*,*,#710,.F.);
+#760=ORIENTED_EDGE('',*,*,#513,.F.);
+#761=ORIENTED_EDGE('',*,*,#473,.F.);
+#762=ORIENTED_EDGE('',*,*,#733,.F.);
+#763=ORIENTED_EDGE('',*,*,#635,.F.);
+#764=ORIENTED_EDGE('',*,*,#595,.F.);
+#765=EDGE_LOOP('',(#750,#757,#758,#759,#760,#761,#762,#763,#764));
+#766=FACE_OUTER_BOUND('',#765,.T.);
+#767=ADVANCED_FACE('',(#766),#742,.F.);
+#768=CARTESIAN_POINT('',(14.591282227665296,-8.124461394538905,4.0));
+#769=DIRECTION('',(0.0,0.0,1.0));
+#770=DIRECTION('',(1.0,0.0,0.0));
+#771=AXIS2_PLACEMENT_3D('',#768,#769,#770);
+#772=PLANE('',#771);
+#773=CARTESIAN_POINT('',(7.416198487095663,-3.0,4.0));
+#774=VERTEX_POINT('',#773);
+#775=CARTESIAN_POINT('',(5.404241609489264,-15.258519904541757,4.0));
+#776=DIRECTION('',(0.161960300175265,0.986797274604636,0.0));
+#777=VECTOR('',#776,12.422531172325314);
+#778=LINE('',#775,#777);
+#779=EDGE_CURVE('',#606,#774,#778,.T.);
+#780=ORIENTED_EDGE('',*,*,#779,.F.);
+#781=ORIENTED_EDGE('',*,*,#612,.F.);
+#782=ORIENTED_EDGE('',*,*,#649,.F.);
+#783=ORIENTED_EDGE('',*,*,#726,.F.);
+#784=ORIENTED_EDGE('',*,*,#490,.F.);
+#785=ORIENTED_EDGE('',*,*,#527,.F.);
+#786=ORIENTED_EDGE('',*,*,#703,.F.);
+#787=ORIENTED_EDGE('',*,*,#667,.F.);
+#788=CARTESIAN_POINT('',(0.0,0.0,4.0));
+#789=DIRECTION('',(0.0,0.0,1.0));
+#790=DIRECTION('',(1.0,0.0,0.0));
+#791=AXIS2_PLACEMENT_3D('',#788,#789,#790);
+#792=CIRCLE('',#791,8.0);
+#793=EDGE_CURVE('',#774,#660,#792,.T.);
+#794=ORIENTED_EDGE('',*,*,#793,.F.);
+#795=EDGE_LOOP('',(#780,#781,#782,#783,#784,#785,#786,#787,#794));
+#796=FACE_OUTER_BOUND('',#795,.T.);
+#797=ADVANCED_FACE('',(#796),#772,.T.);
+#798=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#799=DIRECTION('',(0.0,0.0,1.0));
+#800=DIRECTION('',(1.0,0.0,0.0));
+#801=AXIS2_PLACEMENT_3D('',#798,#799,#800);
+#802=CYLINDRICAL_SURFACE('',#801,8.0);
+#803=CARTESIAN_POINT('',(7.416198487095663,-3.0,9.0));
+#804=VERTEX_POINT('',#803);
+#805=CARTESIAN_POINT('',(0.0,0.0,9.0));
+#806=DIRECTION('',(0.0,0.0,-1.0));
+#807=DIRECTION('',(1.0,0.0,0.0));
+#808=AXIS2_PLACEMENT_3D('',#805,#806,#807);
+#809=CIRCLE('',#808,8.0);
+#810=EDGE_CURVE('',#804,#804,#809,.T.);
+#811=ORIENTED_EDGE('',*,*,#810,.T.);
+#812=EDGE_LOOP('',(#811));
+#813=FACE_OUTER_BOUND('',#812,.T.);
+#814=ORIENTED_EDGE('',*,*,#255,.T.);
+#815=ORIENTED_EDGE('',*,*,#576,.F.);
+#816=CARTESIAN_POINT('',(7.416198487095663,-3.0,5.0));
+#817=VERTEX_POINT('',#816);
+#818=CARTESIAN_POINT('',(0.0,0.0,5.0));
+#819=DIRECTION('',(0.0,0.0,1.0));
+#820=DIRECTION('',(1.0,0.0,0.0));
+#821=AXIS2_PLACEMENT_3D('',#818,#819,#820);
+#822=CIRCLE('',#821,8.0);
+#823=EDGE_CURVE('',#557,#817,#822,.T.);
+#824=ORIENTED_EDGE('',*,*,#823,.T.);
+#825=CARTESIAN_POINT('',(7.416198487095662,-3.000000000000004,5.0));
+#826=DIRECTION('',(0.0,0.0,-1.0));
+#827=VECTOR('',#826,1.0);
+#828=LINE('',#825,#827);
+#829=EDGE_CURVE('',#817,#774,#828,.T.);
+#830=ORIENTED_EDGE('',*,*,#829,.T.);
+#831=ORIENTED_EDGE('',*,*,#793,.T.);
+#832=ORIENTED_EDGE('',*,*,#689,.F.);
+#833=ORIENTED_EDGE('',*,*,#756,.T.);
+#834=CARTESIAN_POINT('',(7.416198487095662,-3.000000000000004,-4.0));
+#835=DIRECTION('',(0.0,0.0,-1.0));
+#836=VECTOR('',#835,1.0);
+#837=LINE('',#834,#836);
+#838=EDGE_CURVE('',#744,#134,#837,.T.);
+#839=ORIENTED_EDGE('',*,*,#838,.T.);
+#840=ORIENTED_EDGE('',*,*,#140,.T.);
+#841=ORIENTED_EDGE('',*,*,#452,.F.);
+#842=ORIENTED_EDGE('',*,*,#355,.T.);
+#843=ORIENTED_EDGE('',*,*,#543,.T.);
+#844=EDGE_LOOP('',(#814,#815,#824,#830,#831,#832,#833,#839,#840,#841,#842,#843));
+#845=FACE_BOUND('',#844,.T.);
+#846=CARTESIAN_POINT('',(-7.356759736433304,-3.1429422807926,-9.0));
+#847=VERTEX_POINT('',#846);
+#848=CARTESIAN_POINT('',(0.0,0.0,-9.0));
+#849=DIRECTION('',(0.0,0.0,1.0));
+#850=DIRECTION('',(1.0,0.0,0.0));
+#851=AXIS2_PLACEMENT_3D('',#848,#849,#850);
+#852=CIRCLE('',#851,8.0);
+#853=EDGE_CURVE('',#847,#847,#852,.T.);
+#854=ORIENTED_EDGE('',*,*,#853,.T.);
+#855=EDGE_LOOP('',(#854));
+#856=FACE_BOUND('',#855,.T.);
+#857=ADVANCED_FACE('',(#813,#845,#856),#802,.T.);
+#858=CARTESIAN_POINT('',(7.416198487095663,-3.0,0.0));
+#859=DIRECTION('',(0.986797274604636,-0.161960300175265,0.0));
+#860=DIRECTION('',(0.0,0.0,-1.0));
+#861=AXIS2_PLACEMENT_3D('',#858,#859,#860);
+#862=PLANE('',#861);
+#863=ORIENTED_EDGE('',*,*,#105,.F.);
+#864=ORIENTED_EDGE('',*,*,#146,.T.);
+#865=ORIENTED_EDGE('',*,*,#838,.F.);
+#866=ORIENTED_EDGE('',*,*,#749,.T.);
+#867=ORIENTED_EDGE('',*,*,#618,.F.);
+#868=ORIENTED_EDGE('',*,*,#779,.T.);
+#869=ORIENTED_EDGE('',*,*,#829,.F.);
+#870=CARTESIAN_POINT('',(7.416198487095663,-3.000000000000007,5.0));
+#871=DIRECTION('',(-0.161960300175265,-0.986797274604636,0.0));
+#872=VECTOR('',#871,30.044510624109261);
+#873=LINE('',#870,#872);
+#874=EDGE_CURVE('',#817,#74,#873,.T.);
+#875=ORIENTED_EDGE('',*,*,#874,.T.);
+#876=EDGE_LOOP('',(#863,#864,#865,#866,#867,#868,#869,#875));
+#877=FACE_OUTER_BOUND('',#876,.T.);
+#878=ADVANCED_FACE('',(#877),#862,.T.);
+#879=CARTESIAN_POINT('',(-0.623903238341491,-18.604209300430878,5.0));
+#880=DIRECTION('',(0.0,0.0,1.0));
+#881=DIRECTION('',(1.0,0.0,0.0));
+#882=AXIS2_PLACEMENT_3D('',#879,#880,#881);
+#883=PLANE('',#882);
+#884=ORIENTED_EDGE('',*,*,#82,.F.);
+#885=ORIENTED_EDGE('',*,*,#874,.F.);
+#886=ORIENTED_EDGE('',*,*,#823,.F.);
+#887=ORIENTED_EDGE('',*,*,#563,.F.);
+#888=ORIENTED_EDGE('',*,*,#163,.F.);
+#889=EDGE_LOOP('',(#884,#885,#886,#887,#888));
+#890=FACE_OUTER_BOUND('',#889,.T.);
+#891=ADVANCED_FACE('',(#890),#883,.T.);
+#892=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#893=DIRECTION('',(0.0,0.0,1.0));
+#894=DIRECTION('',(-1.0,0.0,0.0));
+#895=AXIS2_PLACEMENT_3D('',#892,#893,#894);
+#896=CYLINDRICAL_SURFACE('',#895,4.050000000000001);
+#897=CARTESIAN_POINT('',(4.050000000000001,4.959820E-016,-9.0));
+#898=VERTEX_POINT('',#897);
+#899=CARTESIAN_POINT('',(0.0,0.0,-9.0));
+#900=DIRECTION('',(0.0,0.0,1.0));
+#901=DIRECTION('',(-1.0,0.0,0.0));
+#902=AXIS2_PLACEMENT_3D('',#899,#900,#901);
+#903=CIRCLE('',#902,4.050000000000001);
+#904=EDGE_CURVE('',#898,#898,#903,.T.);
+#905=ORIENTED_EDGE('',*,*,#904,.F.);
+#906=EDGE_LOOP('',(#905));
+#907=FACE_OUTER_BOUND('',#906,.T.);
+#908=CARTESIAN_POINT('',(4.050000000000001,4.959820E-016,9.0));
+#909=VERTEX_POINT('',#908);
+#910=CARTESIAN_POINT('',(0.0,0.0,9.0));
+#911=DIRECTION('',(0.0,0.0,-1.0));
+#912=DIRECTION('',(-1.0,0.0,0.0));
+#913=AXIS2_PLACEMENT_3D('',#910,#911,#912);
+#914=CIRCLE('',#913,4.050000000000001);
+#915=EDGE_CURVE('',#909,#909,#914,.T.);
+#916=ORIENTED_EDGE('',*,*,#915,.F.);
+#917=EDGE_LOOP('',(#916));
+#918=FACE_BOUND('',#917,.T.);
+#919=ADVANCED_FACE('',(#907,#918),#896,.F.);
+#920=CARTESIAN_POINT('',(0.048875916254524,0.02016615885854,-9.0));
+#921=DIRECTION('',(0.0,0.0,1.0));
+#922=DIRECTION('',(1.0,0.0,0.0));
+#923=AXIS2_PLACEMENT_3D('',#920,#921,#922);
+#924=PLANE('',#923);
+#925=ORIENTED_EDGE('',*,*,#853,.F.);
+#926=EDGE_LOOP('',(#925));
+#927=FACE_OUTER_BOUND('',#926,.T.);
+#928=ORIENTED_EDGE('',*,*,#904,.T.);
+#929=EDGE_LOOP('',(#928));
+#930=FACE_BOUND('',#929,.T.);
+#931=ADVANCED_FACE('',(#927,#930),#924,.F.);
+#932=CARTESIAN_POINT('',(0.048875916254524,0.02016615885854,9.0));
+#933=DIRECTION('',(0.0,0.0,1.0));
+#934=DIRECTION('',(1.0,0.0,0.0));
+#935=AXIS2_PLACEMENT_3D('',#932,#933,#934);
+#936=PLANE('',#935);
+#937=ORIENTED_EDGE('',*,*,#810,.F.);
+#938=EDGE_LOOP('',(#937));
+#939=FACE_OUTER_BOUND('',#938,.T.);
+#940=ORIENTED_EDGE('',*,*,#915,.T.);
+#941=EDGE_LOOP('',(#940));
+#942=FACE_BOUND('',#941,.T.);
+#943=ADVANCED_FACE('',(#939,#942),#936,.T.);
+#944=CLOSED_SHELL('',(#109,#150,#232,#299,#366,#383,#400,#417,#434,#458,#500,#531,#548,#580,#622,#653,#693,#715,#737,#767,#797,#857,#878,#891,#919,#931,#943));
+#945=MANIFOLD_SOLID_BREP('Solid1',#944);
+#946=COLOUR_RGB('Orange',0.917647004127502,0.627451002597809,0.341176003217697);
+#947=FILL_AREA_STYLE_COLOUR('Orange',#946);
+#948=FILL_AREA_STYLE('Orange',(#947));
+#949=SURFACE_STYLE_FILL_AREA(#948);
+#950=SURFACE_SIDE_STYLE('Orange',(#949));
+#951=SURFACE_STYLE_USAGE(.BOTH.,#950);
+#952=PRESENTATION_STYLE_ASSIGNMENT((#951));
+#953=STYLED_ITEM('',(#952),#945);
+#954=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#953),#36);
+#955=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#945),#36);
+#956=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#955,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM422_Songbird_22lr_Pistol-JamesRPatrick/STEP/PM422TriggerPin1.stp

@@ -0,0 +1,264 @@
+ISO-10303-21;
+HEADER;
+/****************************************************************
+ * Generated by software with PDElib inside                    *
+ * PDElib Version v51a, created Tue 11/30/2010                  *
+ * ITI Transcendata (http://www.transcendata.com/)              *
+ ****************************************************************/
+FILE_DESCRIPTION((''),'2;1');
+FILE_NAME('C:\\Users\\JamesRPatrick\\Documents\\Autodesk\\PM422\\PM422Pin1.stp','2015-05-16T21:10:51',('JamesRPatrick'),(''),'Autodesk Inventor 2012','Autodesk Inventor 2012','');
+FILE_SCHEMA(('AUTOMOTIVE_DESIGN { 1 0 10303 214 1 1 1 1 }'));
+ENDSEC;
+DATA;
+#5=APPLICATION_CONTEXT('automotive design');
+#6=APPLICATION_PROTOCOL_DEFINITION('International Standard','automotive_design',2001,#5);
+#7=PRODUCT_CONTEXT('',#5,'mechanical');
+#8=PRODUCT('PM422Pin1','PM422Pin1',$,(#7));
+#9=PRODUCT_RELATED_PRODUCT_CATEGORY('part',$,(#8));
+#10=PRODUCT_DEFINITION_FORMATION('',$,#8);
+#11=PRODUCT_DEFINITION_CONTEXT('part definition',#5,'design');
+#12=PRODUCT_DEFINITION('',$,#10,#11);
+#18=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#19=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#20=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#18);
+#24=(CONVERSION_BASED_UNIT('DEGREE',#20)NAMED_UNIT(#19)PLANE_ANGLE_UNIT());
+#28=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#32=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#34=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.01),#32,'DISTANCE_ACCURACY_VALUE','');
+#36=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#34))GLOBAL_UNIT_ASSIGNED_CONTEXT((#24,#28,#32))REPRESENTATION_CONTEXT('None','None'));
+#37=AXIS2_PLACEMENT_3D('',#38,#39,#40);
+#38=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#39=DIRECTION('',(0.0,0.0,1.0));
+#40=DIRECTION('',(1.0,0.0,0.0));
+#41=SHAPE_REPRESENTATION('',(#37),#36);
+#42=PRODUCT_DEFINITION_SHAPE('','',#12);
+#43=SHAPE_DEFINITION_REPRESENTATION(#42,#41);
+#49=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
+#50=DIMENSIONAL_EXPONENTS(0.0,0.0,0.0,0.0,0.0,0.0,0.0);
+#51=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(0.0174532925),#49);
+#55=(CONVERSION_BASED_UNIT('DEGREE',#51)NAMED_UNIT(#50)PLANE_ANGLE_UNIT());
+#59=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
+#63=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
+#65=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(0.000001),#63,'DISTANCE_ACCURACY_VALUE','');
+#67=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((#65))GLOBAL_UNIT_ASSIGNED_CONTEXT((#55,#59,#63))REPRESENTATION_CONTEXT('','3D'));
+#68=CARTESIAN_POINT('',(0.0,0.0,-20.0));
+#69=DIRECTION('',(0.0,0.0,1.0));
+#70=DIRECTION('',(1.0,0.0,0.0));
+#71=AXIS2_PLACEMENT_3D('',#68,#69,#70);
+#72=PLANE('',#71);
+#73=CARTESIAN_POINT('',(-4.0,4.898587E-016,-20.0));
+#74=VERTEX_POINT('',#73);
+#75=CARTESIAN_POINT('',(0.0,0.0,-20.0));
+#76=DIRECTION('',(0.0,0.0,1.0));
+#77=DIRECTION('',(1.0,0.0,0.0));
+#78=AXIS2_PLACEMENT_3D('',#75,#76,#77);
+#79=CIRCLE('',#78,4.0);
+#80=EDGE_CURVE('',#74,#74,#79,.T.);
+#81=ORIENTED_EDGE('',*,*,#80,.T.);
+#82=EDGE_LOOP('',(#81));
+#83=FACE_OUTER_BOUND('',#82,.T.);
+#84=CARTESIAN_POINT('',(-3.0,3.673940E-016,-20.0));
+#85=VERTEX_POINT('',#84);
+#86=CARTESIAN_POINT('',(0.0,0.0,-20.0));
+#87=DIRECTION('',(0.0,0.0,1.0));
+#88=DIRECTION('',(1.0,0.0,0.0));
+#89=AXIS2_PLACEMENT_3D('',#86,#87,#88);
+#90=CIRCLE('',#89,3.0);
+#91=EDGE_CURVE('',#85,#85,#90,.T.);
+#92=ORIENTED_EDGE('',*,*,#91,.F.);
+#93=EDGE_LOOP('',(#92));
+#94=FACE_BOUND('',#93,.T.);
+#95=ADVANCED_FACE('',(#83,#94),#72,.T.);
+#96=CARTESIAN_POINT('',(0.0,0.0,-20.0));
+#97=DIRECTION('',(0.0,0.0,-1.0));
+#98=DIRECTION('',(1.0,0.0,0.0));
+#99=AXIS2_PLACEMENT_3D('',#96,#97,#98);
+#100=CYLINDRICAL_SURFACE('',#99,4.0);
+#101=CARTESIAN_POINT('',(-4.0,4.898587E-016,-22.0));
+#102=VERTEX_POINT('',#101);
+#103=CARTESIAN_POINT('',(0.0,0.0,-22.0));
+#104=DIRECTION('',(0.0,0.0,1.0));
+#105=DIRECTION('',(1.0,0.0,0.0));
+#106=AXIS2_PLACEMENT_3D('',#103,#104,#105);
+#107=CIRCLE('',#106,4.0);
+#108=EDGE_CURVE('',#102,#102,#107,.T.);
+#109=ORIENTED_EDGE('',*,*,#108,.T.);
+#110=EDGE_LOOP('',(#109));
+#111=FACE_OUTER_BOUND('',#110,.T.);
+#112=ORIENTED_EDGE('',*,*,#80,.F.);
+#113=EDGE_LOOP('',(#112));
+#114=FACE_BOUND('',#113,.T.);
+#115=ADVANCED_FACE('',(#111,#114),#100,.T.);
+#116=CARTESIAN_POINT('',(0.0,0.0,-22.0));
+#117=DIRECTION('',(0.0,0.0,1.0));
+#118=DIRECTION('',(1.0,0.0,0.0));
+#119=AXIS2_PLACEMENT_3D('',#116,#117,#118);
+#120=PLANE('',#119);
+#121=ORIENTED_EDGE('',*,*,#108,.F.);
+#122=EDGE_LOOP('',(#121));
+#123=FACE_OUTER_BOUND('',#122,.T.);
+#124=ADVANCED_FACE('',(#123),#120,.F.);
+#125=CARTESIAN_POINT('',(0.0,0.0,-15.0));
+#126=DIRECTION('',(0.0,0.0,-1.0));
+#127=DIRECTION('',(1.0,0.0,0.0));
+#128=AXIS2_PLACEMENT_3D('',#125,#126,#127);
+#129=CYLINDRICAL_SURFACE('',#128,3.0);
+#130=ORIENTED_EDGE('',*,*,#91,.T.);
+#131=EDGE_LOOP('',(#130));
+#132=FACE_OUTER_BOUND('',#131,.T.);
+#133=CARTESIAN_POINT('',(-3.0,3.673940E-016,-15.0));
+#134=VERTEX_POINT('',#133);
+#135=CARTESIAN_POINT('',(0.0,0.0,-15.0));
+#136=DIRECTION('',(0.0,0.0,1.0));
+#137=DIRECTION('',(1.0,0.0,0.0));
+#138=AXIS2_PLACEMENT_3D('',#135,#136,#137);
+#139=CIRCLE('',#138,3.0);
+#140=EDGE_CURVE('',#134,#134,#139,.T.);
+#141=ORIENTED_EDGE('',*,*,#140,.F.);
+#142=EDGE_LOOP('',(#141));
+#143=FACE_BOUND('',#142,.T.);
+#144=ADVANCED_FACE('',(#132,#143),#129,.T.);
+#145=CARTESIAN_POINT('',(0.0,0.0,20.0));
+#146=DIRECTION('',(0.0,0.0,-1.0));
+#147=DIRECTION('',(-1.0,0.0,0.0));
+#148=AXIS2_PLACEMENT_3D('',#145,#146,#147);
+#149=PLANE('',#148);
+#150=CARTESIAN_POINT('',(4.0,4.898587E-016,20.0));
+#151=VERTEX_POINT('',#150);
+#152=CARTESIAN_POINT('',(0.0,0.0,20.0));
+#153=DIRECTION('',(0.0,0.0,-1.0));
+#154=DIRECTION('',(-1.0,0.0,0.0));
+#155=AXIS2_PLACEMENT_3D('',#152,#153,#154);
+#156=CIRCLE('',#155,4.0);
+#157=EDGE_CURVE('',#151,#151,#156,.T.);
+#158=ORIENTED_EDGE('',*,*,#157,.T.);
+#159=EDGE_LOOP('',(#158));
+#160=FACE_OUTER_BOUND('',#159,.T.);
+#161=CARTESIAN_POINT('',(3.0,3.673940E-016,20.0));
+#162=VERTEX_POINT('',#161);
+#163=CARTESIAN_POINT('',(0.0,0.0,20.0));
+#164=DIRECTION('',(0.0,0.0,-1.0));
+#165=DIRECTION('',(-1.0,0.0,0.0));
+#166=AXIS2_PLACEMENT_3D('',#163,#164,#165);
+#167=CIRCLE('',#166,3.0);
+#168=EDGE_CURVE('',#162,#162,#167,.T.);
+#169=ORIENTED_EDGE('',*,*,#168,.F.);
+#170=EDGE_LOOP('',(#169));
+#171=FACE_BOUND('',#170,.T.);
+#172=ADVANCED_FACE('',(#160,#171),#149,.T.);
+#173=CARTESIAN_POINT('',(0.0,0.0,20.0));
+#174=DIRECTION('',(0.0,0.0,1.0));
+#175=DIRECTION('',(-1.0,0.0,0.0));
+#176=AXIS2_PLACEMENT_3D('',#173,#174,#175);
+#177=CYLINDRICAL_SURFACE('',#176,4.0);
+#178=CARTESIAN_POINT('',(4.0,4.898587E-016,22.0));
+#179=VERTEX_POINT('',#178);
+#180=CARTESIAN_POINT('',(0.0,0.0,22.0));
+#181=DIRECTION('',(0.0,0.0,-1.0));
+#182=DIRECTION('',(-1.0,0.0,0.0));
+#183=AXIS2_PLACEMENT_3D('',#180,#181,#182);
+#184=CIRCLE('',#183,4.0);
+#185=EDGE_CURVE('',#179,#179,#184,.T.);
+#186=ORIENTED_EDGE('',*,*,#185,.T.);
+#187=EDGE_LOOP('',(#186));
+#188=FACE_OUTER_BOUND('',#187,.T.);
+#189=ORIENTED_EDGE('',*,*,#157,.F.);
+#190=EDGE_LOOP('',(#189));
+#191=FACE_BOUND('',#190,.T.);
+#192=ADVANCED_FACE('',(#188,#191),#177,.T.);
+#193=CARTESIAN_POINT('',(0.0,0.0,22.0));
+#194=DIRECTION('',(0.0,0.0,-1.0));
+#195=DIRECTION('',(-1.0,0.0,0.0));
+#196=AXIS2_PLACEMENT_3D('',#193,#194,#195);
+#197=PLANE('',#196);
+#198=ORIENTED_EDGE('',*,*,#185,.F.);
+#199=EDGE_LOOP('',(#198));
+#200=FACE_OUTER_BOUND('',#199,.T.);
+#201=ADVANCED_FACE('',(#200),#197,.F.);
+#202=CARTESIAN_POINT('',(0.0,0.0,15.0));
+#203=DIRECTION('',(0.0,0.0,1.0));
+#204=DIRECTION('',(-1.0,0.0,0.0));
+#205=AXIS2_PLACEMENT_3D('',#202,#203,#204);
+#206=CYLINDRICAL_SURFACE('',#205,3.0);
+#207=ORIENTED_EDGE('',*,*,#168,.T.);
+#208=EDGE_LOOP('',(#207));
+#209=FACE_OUTER_BOUND('',#208,.T.);
+#210=CARTESIAN_POINT('',(3.0,3.673940E-016,15.0));
+#211=VERTEX_POINT('',#210);
+#212=CARTESIAN_POINT('',(0.0,0.0,15.0));
+#213=DIRECTION('',(0.0,0.0,-1.0));
+#214=DIRECTION('',(-1.0,0.0,0.0));
+#215=AXIS2_PLACEMENT_3D('',#212,#213,#214);
+#216=CIRCLE('',#215,3.0);
+#217=EDGE_CURVE('',#211,#211,#216,.T.);
+#218=ORIENTED_EDGE('',*,*,#217,.F.);
+#219=EDGE_LOOP('',(#218));
+#220=FACE_BOUND('',#219,.T.);
+#221=ADVANCED_FACE('',(#209,#220),#206,.T.);
+#222=CARTESIAN_POINT('',(0.0,0.0,-15.0));
+#223=DIRECTION('',(0.0,0.0,-1.0));
+#224=DIRECTION('',(-1.0,0.0,0.0));
+#225=AXIS2_PLACEMENT_3D('',#222,#223,#224);
+#226=PLANE('',#225);
+#227=CARTESIAN_POINT('',(4.0,4.898587E-016,-15.0));
+#228=VERTEX_POINT('',#227);
+#229=CARTESIAN_POINT('',(0.0,0.0,-15.0));
+#230=DIRECTION('',(0.0,0.0,1.0));
+#231=DIRECTION('',(-1.0,0.0,0.0));
+#232=AXIS2_PLACEMENT_3D('',#229,#230,#231);
+#233=CIRCLE('',#232,4.0);
+#234=EDGE_CURVE('',#228,#228,#233,.T.);
+#235=ORIENTED_EDGE('',*,*,#234,.F.);
+#236=EDGE_LOOP('',(#235));
+#237=FACE_OUTER_BOUND('',#236,.T.);
+#238=ORIENTED_EDGE('',*,*,#140,.T.);
+#239=EDGE_LOOP('',(#238));
+#240=FACE_BOUND('',#239,.T.);
+#241=ADVANCED_FACE('',(#237,#240),#226,.T.);
+#242=CARTESIAN_POINT('',(0.0,0.0,0.0));
+#243=DIRECTION('',(0.0,0.0,1.0));
+#244=DIRECTION('',(-1.0,0.0,0.0));
+#245=AXIS2_PLACEMENT_3D('',#242,#243,#244);
+#246=CYLINDRICAL_SURFACE('',#245,4.0);
+#247=ORIENTED_EDGE('',*,*,#234,.T.);
+#248=EDGE_LOOP('',(#247));
+#249=FACE_OUTER_BOUND('',#248,.T.);
+#250=CARTESIAN_POINT('',(4.0,4.898587E-016,15.0));
+#251=VERTEX_POINT('',#250);
+#252=CARTESIAN_POINT('',(0.0,0.0,15.0));
+#253=DIRECTION('',(0.0,0.0,-1.0));
+#254=DIRECTION('',(-1.0,0.0,0.0));
+#255=AXIS2_PLACEMENT_3D('',#252,#253,#254);
+#256=CIRCLE('',#255,4.0);
+#257=EDGE_CURVE('',#251,#251,#256,.T.);
+#258=ORIENTED_EDGE('',*,*,#257,.T.);
+#259=EDGE_LOOP('',(#258));
+#260=FACE_BOUND('',#259,.T.);
+#261=ADVANCED_FACE('',(#249,#260),#246,.T.);
+#262=CARTESIAN_POINT('',(0.0,0.0,15.0));
+#263=DIRECTION('',(0.0,0.0,-1.0));
+#264=DIRECTION('',(-1.0,0.0,0.0));
+#265=AXIS2_PLACEMENT_3D('',#262,#263,#264);
+#266=PLANE('',#265);
+#267=ORIENTED_EDGE('',*,*,#257,.F.);
+#268=EDGE_LOOP('',(#267));
+#269=FACE_OUTER_BOUND('',#268,.T.);
+#270=ORIENTED_EDGE('',*,*,#217,.T.);
+#271=EDGE_LOOP('',(#270));
+#272=FACE_BOUND('',#271,.T.);
+#273=ADVANCED_FACE('',(#269,#272),#266,.F.);
+#274=CLOSED_SHELL('',(#95,#115,#124,#144,#172,#192,#201,#221,#241,#261,#273));
+#275=MANIFOLD_SOLID_BREP('Solid1',#274);
+#276=COLOUR_RGB('PTFE',0.917647004127502,0.921568989753723,0.933332979679108);
+#277=FILL_AREA_STYLE_COLOUR('PTFE',#276);
+#278=FILL_AREA_STYLE('PTFE',(#277));
+#279=SURFACE_STYLE_FILL_AREA(#278);
+#280=SURFACE_SIDE_STYLE('PTFE',(#279));
+#281=SURFACE_STYLE_USAGE(.BOTH.,#280);
+#282=PRESENTATION_STYLE_ASSIGNMENT((#281));
+#283=STYLED_ITEM('',(#282),#275);
+#284=MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION('',(#283),#36);
+#285=ADVANCED_BREP_SHAPE_REPRESENTATION('ABSR',(#275),#36);
+#286=SHAPE_REPRESENTATION_RELATIONSHIP('SRR','None',#285,#41);
+ENDSEC;
+END-ISO-10303-21;

Firearms/PM422_Songbird_22lr_Pistol-JamesRPatrick/STEP/barrel short barrel insert_FP.step

@@ -0,0 +1,735 @@
+ISO-10303-21;
+HEADER;
+FILE_DESCRIPTION (( 'STEP AP214' ),
+    '1' );
+FILE_NAME ('barrel short barrel insert.STEP',
+    '2015-06-12T03:46:31',
+    ( '' ),
+    ( '' ),
+    'SwSTEP 2.0',
+    'SolidWorks 2015',
+    '' );
+FILE_SCHEMA (( 'AUTOMOTIVE_DESIGN' ));
+ENDSEC;
+
+DATA;
+#1 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #272 ), #643 ) ;
+#2 = VERTEX_POINT ( 'NONE', #381 ) ;
+#3 = CARTESIAN_POINT ( 'NONE',  ( -3.010299108696746100, -2.646690940933555900, 109.5817733907593800 ) ) ;
+#4 = EDGE_CURVE ( 'NONE', #439, #556, #578, .T. ) ;
+#5 = FACE_OUTER_BOUND ( 'NONE', #502, .T. ) ;
+#6 = CARTESIAN_POINT ( 'NONE',  ( 10.99999999999997200, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#7 = VERTEX_POINT ( 'NONE', #321 ) ;
+#8 = AXIS2_PLACEMENT_3D ( 'NONE', #495, #603, #667 ) ;
+#9 = CYLINDRICAL_SURFACE ( 'NONE', #583, 4.000000000000000000 ) ;
+#10 = ORIENTED_EDGE ( 'NONE', *, *, #634, .T. ) ;
+#11 = ORIENTED_EDGE ( 'NONE', *, *, #383, .F. ) ;
+#12 = SURFACE_SIDE_STYLE ('',( #446 ) ) ;
+#13 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#14 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#15 = EDGE_CURVE ( 'NONE', #620, #420, #589, .T. ) ;
+#16 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#17 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#18 = CIRCLE ( 'NONE', #599, 10.99999999999999600 ) ;
+#19 = CARTESIAN_POINT ( 'NONE',  ( -2.012462208717107800, 3.466736779432103300, 109.8166109810664600 ) ) ;
+#20 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, 0.0000000000000000000, 99.00000000000000000 ) ) ;
+#21 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#22 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#23 = ADVANCED_FACE ( 'NONE', ( #685 ), #596, .T. ) ;
+#24 = CARTESIAN_POINT ( 'NONE',  ( 10.99999999999997200, 6.999999999999999100, 0.9999999999999961100 ) ) ;
+#25 = ORIENTED_EDGE ( 'NONE', *, *, #42, .T. ) ;
+#26 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999971600, 11.00000000000000000, 99.00000000000002800 ) ) ;
+#27 = EDGE_CURVE ( 'NONE', #322, #379, #232, .T. ) ;
+#28 = ORIENTED_EDGE ( 'NONE', *, *, #168, .F. ) ;
+#29 = EDGE_LOOP ( 'NONE', ( #465, #698, #28, #136 ) ) ;
+#30 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#31 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #341, 'distance_accuracy_value', 'NONE');
+#32 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#33 = CARTESIAN_POINT ( 'NONE',  ( 2.442575420527236300, 3.178186125133738700, 109.7276304088764500 ) ) ;
+#34 = AXIS2_PLACEMENT_3D ( 'NONE', #456, #140, #143 ) ;
+#35 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#36 = FACE_OUTER_BOUND ( 'NONE', #119, .T. ) ;
+#37 = VECTOR ( 'NONE', #651, 1000.000000000000000 ) ;
+#38 = EDGE_CURVE ( 'NONE', #55, #285, #267, .T. ) ;
+#39 = SURFACE_STYLE_USAGE ( .BOTH. , #573 ) ;
+#40 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 0.0000000000000000000, 99.00000000000000000 ) ) ;
+#41 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, -11.00000000000000000, 106.0000000000000100 ) ) ;
+#42 = EDGE_CURVE ( 'NONE', #182, #512, #215, .T. ) ;
+#43 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#44 = CARTESIAN_POINT ( 'NONE',  ( -4.000000000000000000, 0.0000000000000000000, 110.2611402295205500 ) ) ;
+#45 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#46 = ORIENTED_EDGE ( 'NONE', *, *, #168, .T. ) ;
+#47 = VERTEX_POINT ( 'NONE', #6 ) ;
+#48 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#49 = AXIS2_PLACEMENT_3D ( 'NONE', #50, #208, #315 ) ;
+#50 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#51 = EDGE_CURVE ( 'NONE', #549, #692, #597, .T. ) ;
+#52 = FACE_BOUND ( 'NONE', #218, .T. ) ;
+#53 = CIRCLE ( 'NONE', #174, 4.000000000000000000 ) ;
+#54 = ORIENTED_EDGE ( 'NONE', *, *, #525, .T. ) ;
+#55 = VERTEX_POINT ( 'NONE', #117 ) ;
+#56 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#57 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#58 = ORIENTED_EDGE ( 'NONE', *, *, #134, .T. ) ;
+#59 = ADVANCED_FACE ( 'NONE', ( #425 ), #355, .T. ) ;
+#60 = ORIENTED_EDGE ( 'NONE', *, *, #396, .F. ) ;
+#61 = ORIENTED_EDGE ( 'NONE', *, *, #121, .F. ) ;
+#62 = EDGE_CURVE ( 'NONE', #322, #153, #323, .T. ) ;
+#63 = CARTESIAN_POINT ( 'NONE',  ( -4.000000000000000000, 0.2667854308422756800, 109.2469507659596200 ) ) ;
+#64 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#65 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#66 = AXIS2_PLACEMENT_3D ( 'NONE', #98, #572, #95 ) ;
+#67 = FACE_OUTER_BOUND ( 'NONE', #593, .T. ) ;
+#68 = CARTESIAN_POINT ( 'NONE',  ( 4.000000000000000000, 4.898587196589412800E-016, 66.00000000000000000 ) ) ;
+#69 = ORIENTED_EDGE ( 'NONE', *, *, #505, .F. ) ;
+#70 = FILL_AREA_STYLE ('',( #494 ) ) ;
+#71 = ORIENTED_EDGE ( 'NONE', *, *, #621, .T. ) ;
+#72 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#73 = CARTESIAN_POINT ( 'NONE',  ( -3.468717747055238800, 2.008794620489673800, 109.4398700355808000 ) ) ;
+#74 = MANIFOLD_SOLID_BREP ( 'Cut-Extrude2', #558 ) ;
+#75 = EDGE_CURVE ( 'NONE', #462, #620, #392, .T. ) ;
+#76 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#77 = ORIENTED_EDGE ( 'NONE', *, *, #75, .F. ) ;
+#78 = CARTESIAN_POINT ( 'NONE',  ( 1.783824463297177600, -3.589941625922253200, 109.8571880907992100 ) ) ;
+#79 = MECHANICAL_DESIGN_GEOMETRIC_PRESENTATION_REPRESENTATION (  '', ( #451 ), #191 ) ;
+#80 = FACE_OUTER_BOUND ( 'NONE', #172, .T. ) ;
+#81 = CARTESIAN_POINT ( 'NONE',  ( 1.295317369994522600, 3.793566729491510500, 109.9262126515702000 ) ) ;
+#82 = ORIENTED_EDGE ( 'NONE', *, *, #207, .F. ) ;
+#83 = CARTESIAN_POINT ( 'NONE',  ( 3.793119239543990300, 1.296391878017090900, 109.3258722425337300 ) ) ;
+#84 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#85 = CARTESIAN_POINT ( 'NONE',  ( -3.857637000437372700E-015, -4.000000000000000000, 110.0000000000000000 ) ) ;
+#86 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#87 = LINE ( 'NONE', #127, #668 ) ;
+#88 = EDGE_CURVE ( 'NONE', #285, #7, #632, .T. ) ;
+#89 = ORIENTED_EDGE ( 'NONE', *, *, #647, .T. ) ;
+#90 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000001600, 0.0000000000000000000, 0.9999999999999961100 ) ) ;
+#91 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#92 = ORIENTED_EDGE ( 'NONE', *, *, #351, .T. ) ;
+#93 = EDGE_LOOP ( 'NONE', ( #326, #293, #652, #348 ) ) ;
+#94 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999971600, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#95 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#96 = CIRCLE ( 'NONE', #247, 4.000000000000003600 ) ;
+#97 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#98 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#99 = ORIENTED_EDGE ( 'NONE', *, *, #62, .T. ) ;
+#100 = AXIS2_PLACEMENT_3D ( 'NONE', #550, #296, #394 ) ;
+#101 = EDGE_CURVE ( 'NONE', #7, #285, #655, .T. ) ;
+#102 = CARTESIAN_POINT ( 'NONE',  ( -0.2636696539480270500, -4.000000000000003600, 109.9999999999999900 ) ) ;
+#103 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, 0.0000000000000000000 ) ) ;
+#104 = VECTOR ( 'NONE', #601, 1000.000000000000000 ) ;
+#105 = ORIENTED_EDGE ( 'NONE', *, *, #647, .F. ) ;
+#106 = EDGE_LOOP ( 'NONE', ( #82, #345, #501, #111, #250 ) ) ;
+#107 = ADVANCED_FACE ( 'NONE', ( #145 ), #338, .T. ) ;
+#108 = AXIS2_PLACEMENT_3D ( 'NONE', #622, #97, #413 ) ;
+#109 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#110 = LINE ( 'NONE', #310, #361 ) ;
+#111 = ORIENTED_EDGE ( 'NONE', *, *, #4, .T. ) ;
+#112 = ADVANCED_FACE ( 'NONE', ( #80 ), #126, .F. ) ;
+#113 = AXIS2_PLACEMENT_3D ( 'NONE', #169, #486, #273 ) ;
+#114 = VERTEX_POINT ( 'NONE', #507 ) ;
+#115 = AXIS2_PLACEMENT_3D ( 'NONE', #123, #16, #125 ) ;
+#116 = VECTOR ( 'NONE', #311, 1000.000000000000000 ) ;
+#117 = CARTESIAN_POINT ( 'NONE',  ( -5.099999999999999600, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#118 = FACE_BOUND ( 'NONE', #402, .T. ) ;
+#119 = EDGE_LOOP ( 'NONE', ( #77, #61, #297, #339 ) ) ;
+#120 = CARTESIAN_POINT ( 'NONE',  ( -3.591610038374460700, 1.780249534950029600, 109.3976835571163400 ) ) ;
+#121 = EDGE_CURVE ( 'NONE', #556, #462, #605, .T. ) ;
+#122 = ADVANCED_FACE ( 'NONE', ( #570 ), #684, .F. ) ;
+#123 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 110.2611402295205500 ) ) ;
+#124 = CYLINDRICAL_SURFACE ( 'NONE', #185, 10.99999999999999600 ) ;
+#125 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#126 = CYLINDRICAL_SURFACE ( 'NONE', #347, 5.099999999999999600 ) ;
+#127 = CARTESIAN_POINT ( 'NONE',  ( 10.99999999999997200, 0.0000000000000000000, 0.9999999999999961100 ) ) ;
+#128 = EDGE_LOOP ( 'NONE', ( #188, #448, #369, #638 ) ) ;
+#129 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#130 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#131 = CARTESIAN_POINT ( 'NONE',  ( 0.2635091074003048100, -4.000000000000004400, 109.9999999999999900 ) ) ;
+#132 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#133 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#134 = EDGE_CURVE ( 'NONE', #493, #431, #653, .T. ) ;
+#135 = LINE ( 'NONE', #229, #371 ) ;
+#136 = ORIENTED_EDGE ( 'NONE', *, *, #15, .T. ) ;
+#137 = CARTESIAN_POINT ( 'NONE',  ( 3.014767933382203100, -2.641702519827072500, 109.5805103923817000 ) ) ;
+#138 = CARTESIAN_POINT ( 'NONE',  ( 2.012453748273773400, 3.466564818666349800, 109.8165733384225400 ) ) ;
+#139 = AXIS2_PLACEMENT_3D ( 'NONE', #639, #255, #245 ) ;
+#140 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#141 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999971600, -11.00000000000000000, 0.9999999999999961100 ) ) ;
+#142 = LINE ( 'NONE', #609, #104 ) ;
+#143 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#144 = AXIS2_PLACEMENT_3D ( 'NONE', #30, #291, #563 ) ;
+#145 = FACE_OUTER_BOUND ( 'NONE', #469, .T. ) ;
+#146 = ORIENTED_EDGE ( 'NONE', *, *, #75, .T. ) ;
+#147 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999995600, -11.00000000000000000, 99.00000000000000000 ) ) ;
+#148 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#149 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#150 = ORIENTED_EDGE ( 'NONE', *, *, #216, .F. ) ;
+#151 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#152 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#153 = VERTEX_POINT ( 'NONE', #444 ) ;
+#154 = AXIS2_PLACEMENT_3D ( 'NONE', #203, #574, #256 ) ;
+#155 = ORIENTED_EDGE ( 'NONE', *, *, #535, .T. ) ;
+#156 = CARTESIAN_POINT ( 'NONE',  ( -2.444063360990230900, -3.177343815852232500, 109.7273571955831500 ) ) ;
+#157 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#158 = AXIS2_PLACEMENT_3D ( 'NONE', #658, #382, #17 ) ;
+#159 = VECTOR ( 'NONE', #103, 1000.000000000000000 ) ;
+#160 = ORIENTED_EDGE ( 'NONE', *, *, #657, .T. ) ;
+#161 = ADVANCED_FACE ( 'NONE', ( #498 ), #181, .T. ) ;
+#162 = AXIS2_PLACEMENT_3D ( 'NONE', #437, #175, #340 ) ;
+#163 = FACE_OUTER_BOUND ( 'NONE', #128, .T. ) ;
+#164 = ORIENTED_EDGE ( 'NONE', *, *, #396, .T. ) ;
+#165 = VERTEX_POINT ( 'NONE', #500 ) ;
+#166 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#167 = ORIENTED_EDGE ( 'NONE', *, *, #51, .F. ) ;
+#168 = EDGE_CURVE ( 'NONE', #620, #165, #87, .T. ) ;
+#169 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.9999999999999961100 ) ) ;
+#170 = AXIS2_PLACEMENT_3D ( 'NONE', #543, #663, #334 ) ;
+#171 = CARTESIAN_POINT ( 'NONE',  ( -3.180284460520770300, 2.439887166697333000, 109.5313190018498400 ) ) ;
+#172 = EDGE_LOOP ( 'NONE', ( #277, #160, #590, #410 ) ) ;
+#173 = CARTESIAN_POINT ( 'NONE',  ( -0.2636486564567855900, 4.000000000000002700, 109.9999999999999900 ) ) ;
+#174 = AXIS2_PLACEMENT_3D ( 'NONE', #22, #234, #236 ) ;
+#175 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#176 = CARTESIAN_POINT ( 'NONE',  ( 3.592047136595924300, 1.779208485608268800, 109.3975279996257100 ) ) ;
+#177 = CARTESIAN_POINT ( 'NONE',  ( 1.296481935910230000, -3.793263131295432800, 109.9261016627481500 ) ) ;
+#178 = EDGE_CURVE ( 'NONE', #649, #611, #481, .T. ) ;
+#179 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#180 = VECTOR ( 'NONE', #269, 1000.000000000000000 ) ;
+#181 = PLANE ( 'NONE',  #360 ) ;
+#182 = VERTEX_POINT ( 'NONE', #342 ) ;
+#183 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#184 = CARTESIAN_POINT ( 'NONE',  ( 3.467964178008304800, -2.010168637301475800, 109.4401268624962700 ) ) ;
+#185 = AXIS2_PLACEMENT_3D ( 'NONE', #40, #411, #35 ) ;
+#186 = CARTESIAN_POINT ( 'NONE',  ( 10.99999999999997200, -6.999999999999999100, 0.9999999999999961100 ) ) ;
+#187 = CARTESIAN_POINT ( 'NONE',  ( 3.793225833891706400, -1.295851960561214400, 109.3258272460710000 ) ) ;
+#188 = ORIENTED_EDGE ( 'NONE', *, *, #592, .F. ) ;
+#189 = CARTESIAN_POINT ( 'NONE',  ( 0.2635237349322881500, 4.000000000000001800, 110.0000000000000300 ) ) ;
+#190 = FACE_OUTER_BOUND ( 'NONE', #427, .T. ) ;
+#191 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #31 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #341, #166, #224 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#192 = VECTOR ( 'NONE', #130, 1000.000000000000000 ) ;
+#193 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, 0.0000000000000000000, 99.00000000000000000 ) ) ;
+#194 = ORIENTED_EDGE ( 'NONE', *, *, #561, .F. ) ;
+#195 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #409, 'distance_accuracy_value', 'NONE');
+#196 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, 11.00000000000000000, 0.9999999999999961100 ) ) ;
+#197 = ORIENTED_EDGE ( 'NONE', *, *, #505, .T. ) ;
+#198 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#199 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#200 = ORIENTED_EDGE ( 'NONE', *, *, #666, .T. ) ;
+#201 = PRODUCT_DEFINITION_CONTEXT ( 'detailed design', #157, 'design' ) ;
+#202 = ORIENTED_EDGE ( 'NONE', *, *, #237, .T. ) ;
+#203 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 6.999999999999999100, 106.0000000000000100 ) ) ;
+#204 = ORIENTED_EDGE ( 'NONE', *, *, #435, .T. ) ;
+#205 = CARTESIAN_POINT ( 'NONE',  ( -2.007689174434453200, -3.469602803712263900, 109.8175238522049900 ) ) ;
+#206 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #560, #239, #615, #233, #83, #176, #671, #452, #352, #552, #33, #138, #354, #81, #625, #511, #189, #400 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.01261448153263076400, 0.01340251498041089000, 0.01419054842819101800, 0.01497858187597114400, 0.01576661532375127000, 0.01655464877153139900, 0.01734268221931152500, 0.01813071566709165100, 0.01891874911487177700 ),
+ .UNSPECIFIED. ) ;
+#207 = EDGE_CURVE ( 'NONE', #697, #462, #257, .T. ) ;
+#208 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#209 = CIRCLE ( 'NONE', #280, 4.000000000000000000 ) ;
+#210 = CARTESIAN_POINT ( 'NONE',  ( -3.177479298832294900, -2.443682930146145300, 109.5321796902534700 ) ) ;
+#211 = AXIS2_PLACEMENT_3D ( 'NONE', #629, #449, #84 ) ;
+#212 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#213 = PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE ( 'ANY', '', #478, .NOT_KNOWN. ) ;
+#214 = ORIENTED_EDGE ( 'NONE', *, *, #303, .F. ) ;
+#215 = CIRCLE ( 'NONE', #158, 4.000000000000000000 ) ;
+#216 = EDGE_CURVE ( 'NONE', #692, #565, #630, .T. ) ;
+#217 = ORIENTED_EDGE ( 'NONE', *, *, #670, .F. ) ;
+#218 = EDGE_LOOP ( 'NONE', ( #680, #532 ) ) ;
+#219 = CARTESIAN_POINT ( 'NONE',  ( -3.870895071129775400, 1.041435545032070700, 109.2965620388340400 ) ) ;
+#220 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#221 = SURFACE_STYLE_FILL_AREA ( #358 ) ;
+#222 = CIRCLE ( 'NONE', #170, 4.000000000000000000 ) ;
+#223 = ORIENTED_EDGE ( 'NONE', *, *, #421, .T. ) ;
+#224 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#225 = EDGE_CURVE ( 'NONE', #493, #276, #408, .T. ) ;
+#226 = CARTESIAN_POINT ( 'NONE',  ( -1.044144856023393700, 3.870371932105663300, 109.9534208711637000 ) ) ;
+#227 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#228 = CARTESIAN_POINT ( 'NONE',  ( -0.5252116042210136500, 3.974187985486219900, 109.9905332005320100 ) ) ;
+#229 = CARTESIAN_POINT ( 'NONE',  ( 4.000000000000000000, 4.898587196589412800E-016, 110.2611402295205500 ) ) ;
+#230 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#231 = CIRCLE ( 'NONE', #654, 10.99999999999999600 ) ;
+#232 = LINE ( 'NONE', #484, #180 ) ;
+#233 = CARTESIAN_POINT ( 'NONE',  ( 3.869777487038273700, 1.046302376641122400, 109.2969861395383000 ) ) ;
+#234 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#235 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#236 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#237 = EDGE_CURVE ( 'NONE', #512, #182, #53, .T. ) ;
+#238 = VECTOR ( 'NONE', #356, 1000.000000000000000 ) ;
+#239 = CARTESIAN_POINT ( 'NONE',  ( 4.000000000000000000, 0.2625660048320025400, 109.2469507659595800 ) ) ;
+#240 = FACE_OUTER_BOUND ( 'NONE', #258, .T. ) ;
+#241 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#242 = ORIENTED_EDGE ( 'NONE', *, *, #535, .F. ) ;
+#243 = ORIENTED_EDGE ( 'NONE', *, *, #88, .F. ) ;
+#244 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#245 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#246 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#247 = AXIS2_PLACEMENT_3D ( 'NONE', #496, #610, #72 ) ;
+#248 = CIRCLE ( 'NONE', #522, 5.099999999999999600 ) ;
+#249 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999971600, -6.999999999999999100, 0.9999999999999961100 ) ) ;
+#250 = ORIENTED_EDGE ( 'NONE', *, *, #121, .T. ) ;
+#251 = PLANE ( 'NONE',  #403 ) ;
+#252 = VERTEX_POINT ( 'NONE', #292 ) ;
+#253 = CARTESIAN_POINT ( 'NONE',  ( 5.099999999999999600, 6.245698675651500800E-016, 66.00000000000000000 ) ) ;
+#254 = AXIS2_PLACEMENT_3D ( 'NONE', #282, #284, #664 ) ;
+#255 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#256 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#257 = LINE ( 'NONE', #287, #548 ) ;
+#258 = EDGE_LOOP ( 'NONE', ( #10, #419, #11, #661, #539, #223, #217 ) ) ;
+#259 = ORIENTED_EDGE ( 'NONE', *, *, #602, .F. ) ;
+#260 = AXIS2_PLACEMENT_3D ( 'NONE', #430, #56, #57 ) ;
+#261 = CARTESIAN_POINT ( 'NONE',  ( -0.5249416355252225500, -3.974183051255381700, 109.9905321427175400 ) ) ;
+#262 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 11.00000000000000000, 99.00000000000000000 ) ) ;
+#263 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #304 ) ;
+#264 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#265 = FACE_OUTER_BOUND ( 'NONE', #329, .T. ) ;
+#266 = ADVANCED_FACE ( 'NONE', ( #531 ), #474, .T. ) ;
+#267 = LINE ( 'NONE', #529, #37 ) ;
+#268 = ORIENTED_EDGE ( 'NONE', *, *, #88, .T. ) ;
+#269 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#270 = ADVANCED_FACE ( 'NONE', ( #436 ), #343, .T. ) ;
+#271 = ORIENTED_EDGE ( 'NONE', *, *, #38, .T. ) ;
+#272 = STYLED_ITEM ( 'NONE', ( #490 ), #423 ) ;
+#273 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#274 = CYLINDRICAL_SURFACE ( 'NONE', #433, 4.000000000000000000 ) ;
+#275 = EDGE_CURVE ( 'NONE', #114, #387, #110, .T. ) ;
+#276 = VERTEX_POINT ( 'NONE', #302 ) ;
+#277 = ORIENTED_EDGE ( 'NONE', *, *, #576, .F. ) ;
+#278 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#279 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#280 = AXIS2_PLACEMENT_3D ( 'NONE', #86, #404, #508 ) ;
+#281 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#282 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999971600, 6.999999999999999100, 0.9999999999999961100 ) ) ;
+#283 = CYLINDRICAL_SURFACE ( 'NONE', #115, 4.000000000000000000 ) ;
+#284 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#285 = VERTEX_POINT ( 'NONE', #359 ) ;
+#286 = PRODUCT_RELATED_PRODUCT_CATEGORY ( 'part', '', ( #478 ) ) ;
+#287 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000001600, 11.00000000000000000, 0.9999999999999961100 ) ) ;
+#288 = CARTESIAN_POINT ( 'NONE',  ( 2.013656833933577000, -3.465905815731204200, 109.8163572960119000 ) ) ;
+#289 = AXIS2_PLACEMENT_3D ( 'NONE', #278, #220, #333 ) ;
+#290 = ADVANCED_FACE ( 'NONE', ( #240 ), #124, .T. ) ;
+#291 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#292 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, -6.999999999999999100, 1.000000000000000900 ) ) ;
+#293 = ORIENTED_EDGE ( 'NONE', *, *, #694, .T. ) ;
+#294 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#295 = EDGE_LOOP ( 'NONE', ( #640, #656, #69, #527 ) ) ;
+#296 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#297 = ORIENTED_EDGE ( 'NONE', *, *, #635, .F. ) ;
+#298 = ADVANCED_FACE ( 'NONE', ( #424 ), #305, .T. ) ;
+#299 = AXIS2_PLACEMENT_3D ( 'NONE', #669, #241, #129 ) ;
+#300 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#301 = CARTESIAN_POINT ( 'NONE',  ( 4.000000000000000000, 4.917931322840523600E-016, 109.2469507659596000 ) ) ;
+#302 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, 6.999999999999999100, 1.000000000000000900 ) ) ;
+#303 = EDGE_CURVE ( 'NONE', #420, #379, #377, .T. ) ;
+#304 = APPLICATION_CONTEXT ( 'automotive_design' ) ;
+#305 = TOROIDAL_SURFACE ( 'NONE', #614, 6.999999999999999100, 4.000000000000000000 ) ;
+#306 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000001600, -11.00000000000000000, 0.9999999999999961100 ) ) ;
+#307 = ADVANCED_FACE ( 'NONE', ( #118, #265 ), #251, .T. ) ;
+#308 = ORIENTED_EDGE ( 'NONE', *, *, #466, .T. ) ;
+#309 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#310 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, -11.00000000000000000, 1.000000000000000900 ) ) ;
+#311 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, -0.0000000000000000000 ) ) ;
+#312 = CYLINDRICAL_SURFACE ( 'NONE', #144, 4.000000000000000000 ) ;
+#313 = PRESENTATION_STYLE_ASSIGNMENT (( #540 ) ) ;
+#314 = ORIENTED_EDGE ( 'NONE', *, *, #383, .T. ) ;
+#315 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#316 = EDGE_CURVE ( 'NONE', #549, #47, #231, .T. ) ;
+#317 = CARTESIAN_POINT ( 'NONE',  ( 10.99999999999997200, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#318 = CARTESIAN_POINT ( 'NONE',  ( -1.042700185977595500, -3.870719696355668900, 109.9535444867393300 ) ) ;
+#319 = CIRCLE ( 'NONE', #108, 4.000000000000000000 ) ;
+#320 = VECTOR ( 'NONE', #32, 1000.000000000000000 ) ;
+#321 = CARTESIAN_POINT ( 'NONE',  ( 5.099999999999999600, 6.245698675651500800E-016, 0.9999999999999961100 ) ) ;
+#322 = VERTEX_POINT ( 'NONE', #362 ) ;
+#323 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #545, #173, #228, #226, #388, #389, #19, #434, #606, #488, #171, #73, #120, #491, #219, #544, #63, #335 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.01891874911487177700, 0.01970715612421996400, 0.02049556313356815100, 0.02128397014291633800, 0.02207237715226452500, 0.02286078416161271100, 0.02364919117096089800, 0.02443759818030908800, 0.02522600518965727500 ),
+ .UNSPECIFIED. ) ;
+#324 = ADVANCED_FACE ( 'NONE', ( #401 ), #567, .F. ) ;
+#325 = AXIS2_PLACEMENT_3D ( 'NONE', #94, #683, #458 ) ;
+#326 = ORIENTED_EDGE ( 'NONE', *, *, #421, .F. ) ;
+#327 = ADVANCED_FACE ( 'NONE', ( #5 ), #274, .F. ) ;
+#328 = ORIENTED_EDGE ( 'NONE', *, *, #216, .T. ) ;
+#329 = EDGE_LOOP ( 'NONE', ( #46, #200, #92, #579, #613, #580, #617, #146 ) ) ;
+#330 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#331 = ORIENTED_EDGE ( 'NONE', *, *, #27, .F. ) ;
+#332 = AXIS2_PLACEMENT_3D ( 'NONE', #503, #506, #179 ) ;
+#333 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#334 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#335 = CARTESIAN_POINT ( 'NONE',  ( -4.000000000000000000, 0.0000000000000000000, 109.2469507659596100 ) ) ;
+#336 = LINE ( 'NONE', #306, #660 ) ;
+#337 = AXIS2_PLACEMENT_3D ( 'NONE', #262, #479, #591 ) ;
+#338 = TOROIDAL_SURFACE ( 'NONE', #289, 6.999999999999999100, 4.000000000000000000 ) ;
+#339 = ORIENTED_EDGE ( 'NONE', *, *, #15, .F. ) ;
+#340 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#341 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#342 = CARTESIAN_POINT ( 'NONE',  ( -4.000000000000000000, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#343 = CYLINDRICAL_SURFACE ( 'NONE', #34, 4.000000000000000000 ) ;
+#344 = CARTESIAN_POINT ( 'NONE',  ( 10.99999999999997200, 0.0000000000000000000, 99.00000000000000000 ) ) ;
+#345 = ORIENTED_EDGE ( 'NONE', *, *, #406, .T. ) ;
+#346 = ORIENTED_EDGE ( 'NONE', *, *, #587, .F. ) ;
+#347 = AXIS2_PLACEMENT_3D ( 'NONE', #14, #386, #391 ) ;
+#348 = ORIENTED_EDGE ( 'NONE', *, *, #134, .F. ) ;
+#349 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999971600, -11.00000000000000000, 99.00000000000000000 ) ) ;
+#350 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#351 = EDGE_CURVE ( 'NONE', #649, #387, #336, .T. ) ;
+#352 = CARTESIAN_POINT ( 'NONE',  ( 3.013310781489056700, 2.643543164278171700, 109.5809526578328400 ) ) ;
+#353 = LINE ( 'NONE', #577, #524 ) ;
+#354 = CARTESIAN_POINT ( 'NONE',  ( 1.780283100643431600, 3.591599602082316400, 109.8577420340467400 ) ) ;
+#355 = TOROIDAL_SURFACE ( 'NONE', #8, 6.999999999999999100, 4.000000000000000000 ) ;
+#356 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#357 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, 0.0000000000000000000, 1.000000000000000900 ) ) ;
+#358 = FILL_AREA_STYLE ('',( #641 ) ) ;
+#359 = CARTESIAN_POINT ( 'NONE',  ( -5.099999999999999600, 0.0000000000000000000, 0.9999999999999961100 ) ) ;
+#360 = AXIS2_PLACEMENT_3D ( 'NONE', #20, #673, #623 ) ;
+#361 = VECTOR ( 'NONE', #691, 1000.000000000000000 ) ;
+#362 = CARTESIAN_POINT ( 'NONE',  ( -3.857637001861020500E-015, 4.000000000000000000, 110.0000000000000000 ) ) ;
+#363 = EDGE_LOOP ( 'NONE', ( #197, #373, #412, #194 ) ) ;
+#364 = ORIENTED_EDGE ( 'NONE', *, *, #635, .T. ) ;
+#365 = EDGE_CURVE ( 'NONE', #276, #252, #678, .T. ) ;
+#366 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 110.2611402295205500 ) ) ;
+#367 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#368 = CARTESIAN_POINT ( 'NONE',  ( -1.297428801284383100, -3.792694355544992600, 109.9259165925129100 ) ) ;
+#369 = ORIENTED_EDGE ( 'NONE', *, *, #525, .F. ) ;
+#370 = AXIS2_PLACEMENT_3D ( 'NONE', #132, #21, #499 ) ;
+#371 = VECTOR ( 'NONE', #547, 1000.000000000000000 ) ;
+#372 = CARTESIAN_POINT ( 'NONE',  ( -3.999999999999999100, -0.2668660297208209100, 109.2469507659596200 ) ) ;
+#373 = ORIENTED_EDGE ( 'NONE', *, *, #178, .F. ) ;
+#374 = EDGE_CURVE ( 'NONE', #431, #439, #636, .T. ) ;
+#375 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#376 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 11.00000000000000000, 99.00000000000000000 ) ) ;
+#377 = CIRCLE ( 'NONE', #66, 10.99999999999999600 ) ;
+#378 = ORIENTED_EDGE ( 'NONE', *, *, #670, .T. ) ;
+#379 = VERTEX_POINT ( 'NONE', #564 ) ;
+#380 = AXIS2_PLACEMENT_3D ( 'NONE', #64, #109, #538 ) ;
+#381 = CARTESIAN_POINT ( 'NONE',  ( 5.099999999999999600, 6.245698675651500800E-016, 66.00000000000000000 ) ) ;
+#382 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#383 = EDGE_CURVE ( 'NONE', #153, #692, #600, .T. ) ;
+#384 = CYLINDRICAL_SURFACE ( 'NONE', #162, 4.000000000000000000 ) ;
+#385 = ORIENTED_EDGE ( 'NONE', *, *, #178, .T. ) ;
+#386 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#387 = VERTEX_POINT ( 'NONE', #581 ) ;
+#388 = CARTESIAN_POINT ( 'NONE',  ( -1.298014455559123300, 3.792533789490169400, 109.9258584572288400 ) ) ;
+#389 = CARTESIAN_POINT ( 'NONE',  ( -1.779949253462593600, 3.591647912360436100, 109.8577624402699800 ) ) ;
+#390 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#391 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#392 = CIRCLE ( 'NONE', #254, 4.000000000000000000 ) ;
+#393 = ORIENTED_EDGE ( 'NONE', *, *, #428, .T. ) ;
+#394 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#395 = CARTESIAN_POINT ( 'NONE',  ( 1.045910534850605300, -3.869760074081514600, 109.9532052687211900 ) ) ;
+#396 = EDGE_CURVE ( 'NONE', #55, #2, #248, .T. ) ;
+#397 = EDGE_LOOP ( 'NONE', ( #674, #385, #71, #598, #559 ) ) ;
+#398 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, -6.999999999999999100, 1.000000000000000900 ) ) ;
+#399 = CIRCLE ( 'NONE', #332, 7.000000000000006200 ) ;
+#400 = CARTESIAN_POINT ( 'NONE',  ( -3.857637001861020500E-015, 4.000000000000000000, 110.0000000000000000 ) ) ;
+#401 = FACE_OUTER_BOUND ( 'NONE', #397, .T. ) ;
+#402 = EDGE_LOOP ( 'NONE', ( #243, #571 ) ) ;
+#403 = AXIS2_PLACEMENT_3D ( 'NONE', #90, #43, #515 ) ;
+#404 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#405 = CARTESIAN_POINT ( 'NONE',  ( 2.444523420200613200, -3.176731373040134500, 109.7271946121960200 ) ) ;
+#406 = EDGE_CURVE ( 'NONE', #697, #431, #353, .T. ) ;
+#407 = CARTESIAN_POINT ( 'NONE',  ( -3.857637000437372700E-015, -4.000000000000000000, 110.0000000000000000 ) ) ;
+#408 = LINE ( 'NONE', #230, #518 ) ;
+#409 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#410 = ORIENTED_EDGE ( 'NONE', *, *, #38, .F. ) ;
+#411 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#412 = ORIENTED_EDGE ( 'NONE', *, *, #666, .F. ) ;
+#413 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#414 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#415 = ORIENTED_EDGE ( 'NONE', *, *, #576, .T. ) ;
+#416 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#417 = AXIS2_PLACEMENT_3D ( 'NONE', #350, #553, #133 ) ;
+#418 = CARTESIAN_POINT ( 'NONE',  ( -3.467778958716068300, -2.010589478506620100, 109.4401960142413900 ) ) ;
+#419 = ORIENTED_EDGE ( 'NONE', *, *, #51, .T. ) ;
+#420 = VERTEX_POINT ( 'NONE', #317 ) ;
+#421 = EDGE_CURVE ( 'NONE', #379, #493, #18, .T. ) ;
+#422 = CARTESIAN_POINT ( 'NONE',  ( -3.792428529461864700, -1.298474956668716200, 109.3261289081727300 ) ) ;
+#423 = ADVANCED_BREP_SHAPE_REPRESENTATION ( 'barrel short barrel insert', ( #74, #49 ), #662 ) ;
+#424 = FACE_OUTER_BOUND ( 'NONE', #432, .T. ) ;
+#425 = FACE_OUTER_BOUND ( 'NONE', #93, .T. ) ;
+#426 = ORIENTED_EDGE ( 'NONE', *, *, #316, .T. ) ;
+#427 = EDGE_LOOP ( 'NONE', ( #164, #415 ) ) ;
+#428 = EDGE_CURVE ( 'NONE', #252, #519, #142, .T. ) ;
+#429 = CIRCLE ( 'NONE', #154, 4.000000000000003600 ) ;
+#430 = CARTESIAN_POINT ( 'NONE',  ( 10.99999999999997200, 0.0000000000000000000, 0.9999999999999961100 ) ) ;
+#431 = VERTEX_POINT ( 'NONE', #645 ) ;
+#432 = EDGE_LOOP ( 'NONE', ( #526, #214, #364, #483 ) ) ;
+#433 = AXIS2_PLACEMENT_3D ( 'NONE', #366, #513, #459 ) ;
+#434 = CARTESIAN_POINT ( 'NONE',  ( -2.446334775480448500, 3.175486451814403900, 109.7268132930296400 ) ) ;
+#435 = EDGE_CURVE ( 'NONE', #565, #512, #135, .T. ) ;
+#436 = FACE_OUTER_BOUND ( 'NONE', #363, .T. ) ;
+#437 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999971600, 6.999999999999999100, 0.9999999999999961100 ) ) ;
+#438 = VECTOR ( 'NONE', #65, 1000.000000000000000 ) ;
+#439 = VERTEX_POINT ( 'NONE', #588 ) ;
+#440 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 0.9999999999999961100 ) ) ;
+#441 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999995600, 11.00000000000000000, 99.00000000000000000 ) ) ;
+#442 = CARTESIAN_POINT ( 'NONE',  ( 3.973895110962122300, -0.5274170767049426400, 109.2572540795661200 ) ) ;
+#443 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#444 = CARTESIAN_POINT ( 'NONE',  ( -4.000000000000000000, 0.0000000000000000000, 109.2469507659596100 ) ) ;
+#445 = PRODUCT_DEFINITION ( 'UNKNOWN', '', #213, #201 ) ;
+#446 = SURFACE_STYLE_FILL_AREA ( #70 ) ;
+#447 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#448 = ORIENTED_EDGE ( 'NONE', *, *, #275, .F. ) ;
+#449 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#450 = CARTESIAN_POINT ( 'NONE',  ( 2.647948952930204900, -3.009283010633285700, 109.6782204602696700 ) ) ;
+#451 = STYLED_ITEM ( 'NONE', ( #313 ), #74 ) ;
+#452 = CARTESIAN_POINT ( 'NONE',  ( 3.177590705894878000, 2.443398164065957900, 109.5321357954785400 ) ) ;
+#453 = VECTOR ( 'NONE', #149, 1000.000000000000000 ) ;
+#454 =( LENGTH_UNIT ( ) NAMED_UNIT ( * ) SI_UNIT ( .MILLI., .METRE. ) );
+#455 = LINE ( 'NONE', #344, #192 ) ;
+#456 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999971600, -6.999999999999999100, 0.9999999999999961100 ) ) ;
+#457 = ORIENTED_EDGE ( 'NONE', *, *, #435, .F. ) ;
+#458 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#459 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#460 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#461 = AXIS2_PLACEMENT_3D ( 'NONE', #566, #637, #91 ) ;
+#462 = VERTEX_POINT ( 'NONE', #467 ) ;
+#463 = CIRCLE ( 'NONE', #370, 5.099999999999999600 ) ;
+#464 = PLANE ( 'NONE',  #509 ) ;
+#465 = ORIENTED_EDGE ( 'NONE', *, *, #546, .T. ) ;
+#466 = EDGE_CURVE ( 'NONE', #618, #549, #96, .T. ) ;
+#467 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999971600, 11.00000000000000000, 0.9999999999999961100 ) ) ;
+#468 = EDGE_LOOP ( 'NONE', ( #682, #393, #378, #686 ) ) ;
+#469 = EDGE_LOOP ( 'NONE', ( #346, #308, #665, #54 ) ) ;
+#470 = APPLICATION_PROTOCOL_DEFINITION ( 'draft international standard', 'automotive_design', 1998, #157 ) ;
+#471 = CARTESIAN_POINT ( 'NONE',  ( -3.857637000437372700E-015, -4.000000000000000000, 110.0000000000000000 ) ) ;
+#472 = CARTESIAN_POINT ( 'NONE',  ( -2.644448132995747400, -3.012269531853928300, 109.6790787472094000 ) ) ;
+#473 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#474 = CYLINDRICAL_SURFACE ( 'NONE', #299, 10.99999999999999600 ) ;
+#475 = VECTOR ( 'NONE', #330, 1000.000000000000000 ) ;
+#476 = EDGE_LOOP ( 'NONE', ( #167, #426, #520, #644, #331, #242, #150 ) ) ;
+#477 = AXIS2_PLACEMENT_3D ( 'NONE', #440, #536, #279 ) ;
+#478 = PRODUCT ( 'barrel short barrel insert', 'barrel short barrel insert', '', ( #584 ) ) ;
+#479 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#480 = ADVANCED_FACE ( 'NONE', ( #36 ), #384, .T. ) ;
+#481 = LINE ( 'NONE', #349, #320 ) ;
+#482 = ADVANCED_FACE ( 'NONE', ( #510 ), #648, .T. ) ;
+#483 = ORIENTED_EDGE ( 'NONE', *, *, #4, .F. ) ;
+#484 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 0.0000000000000000000, 110.0000000000000000 ) ) ;
+#485 = AXIS2_PLACEMENT_3D ( 'NONE', #376, #212, #264 ) ;
+#486 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#487 = EDGE_LOOP ( 'NONE', ( #633, #60, #271, #268 ) ) ;
+#488 = CARTESIAN_POINT ( 'NONE',  ( -3.012766183789556100, 2.643956981405456200, 109.5810789409402200 ) ) ;
+#489 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #451 ) ) ;
+#490 = PRESENTATION_STYLE_ASSIGNMENT (( #39 ) ) ;
+#491 = CARTESIAN_POINT ( 'NONE',  ( -3.793517994189348700, 1.295442898086830200, 109.3257303494445700 ) ) ;
+#492 = FACE_OUTER_BOUND ( 'NONE', #624, .T. ) ;
+#493 = VERTEX_POINT ( 'NONE', #390 ) ;
+#494 = FILL_AREA_STYLE_COLOUR ( '', #152 ) ;
+#495 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#496 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, -6.999999999999999100, 106.0000000000000100 ) ) ;
+#497 = DIRECTION ( 'NONE',  ( 1.000000000000000000, -0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#498 = FACE_OUTER_BOUND ( 'NONE', #468, .T. ) ;
+#499 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#500 = CARTESIAN_POINT ( 'NONE',  ( 10.99999999999997200, -6.999999999999999100, 0.9999999999999961100 ) ) ;
+#501 = ORIENTED_EDGE ( 'NONE', *, *, #374, .T. ) ;
+#502 = EDGE_LOOP ( 'NONE', ( #457, #155, #99, #89, #25 ) ) ;
+#503 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, -11.00000000000000000, 99.00000000000000000 ) ) ;
+#504 = CARTESIAN_POINT ( 'NONE',  ( 0.5309652070527470800, -3.973291812435412000, 109.9902097548023200 ) ) ;
+#505 = EDGE_CURVE ( 'NONE', #47, #611, #222, .T. ) ;
+#506 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#507 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, -11.00000000000000000, 99.00000000000000000 ) ) ;
+#508 = DIRECTION ( 'NONE',  ( 1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#509 = AXIS2_PLACEMENT_3D ( 'NONE', #309, #367, #198 ) ;
+#510 = FACE_OUTER_BOUND ( 'NONE', #295, .T. ) ;
+#511 = CARTESIAN_POINT ( 'NONE',  ( 0.5311112569863106800, 3.973254080354857300, 109.9901963698758300 ) ) ;
+#512 = VERTEX_POINT ( 'NONE', #68 ) ;
+#513 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#514 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#515 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, -0.0000000000000000000 ) ) ;
+#516 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#517 = CARTESIAN_POINT ( 'NONE',  ( -4.000000000000000000, 0.0000000000000000000, 109.2469507659596100 ) ) ;
+#518 = VECTOR ( 'NONE', #616, 1000.000000000000000 ) ;
+#519 = VERTEX_POINT ( 'NONE', #76 ) ;
+#520 = ORIENTED_EDGE ( 'NONE', *, *, #546, .F. ) ;
+#521 = CARTESIAN_POINT ( 'NONE',  ( -3.870468582197488700, -1.043213380296864800, 109.2967236164559900 ) ) ;
+#522 = AXIS2_PLACEMENT_3D ( 'NONE', #375, #642, #48 ) ;
+#523 = CIRCLE ( 'NONE', #627, 4.000000000000000000 ) ;
+#524 = VECTOR ( 'NONE', #473, 1000.000000000000000 ) ;
+#525 = EDGE_CURVE ( 'NONE', #519, #114, #209, .T. ) ;
+#526 = ORIENTED_EDGE ( 'NONE', *, *, #694, .F. ) ;
+#527 = ORIENTED_EDGE ( 'NONE', *, *, #316, .F. ) ;
+#528 = CARTESIAN_POINT ( 'NONE',  ( -3.590809933150642700, -1.781750652633189200, 109.3979582805118000 ) ) ;
+#529 = CARTESIAN_POINT ( 'NONE',  ( -5.099999999999999600, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#530 = ADVANCED_FACE ( 'NONE', ( #492 ), #283, .F. ) ;
+#531 = FACE_OUTER_BOUND ( 'NONE', #476, .T. ) ;
+#532 = ORIENTED_EDGE ( 'NONE', *, *, #237, .F. ) ;
+#533 = ORIENTED_EDGE ( 'NONE', *, *, #225, .F. ) ;
+#534 = ADVANCED_FACE ( 'NONE', ( #537 ), #679, .T. ) ;
+#535 = EDGE_CURVE ( 'NONE', #565, #322, #206, .T. ) ;
+#536 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#537 = FACE_OUTER_BOUND ( 'NONE', #106, .T. ) ;
+#538 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#539 = ORIENTED_EDGE ( 'NONE', *, *, #27, .T. ) ;
+#540 = SURFACE_STYLE_USAGE ( .BOTH. , #12 ) ;
+#541 = UNCERTAINTY_MEASURE_WITH_UNIT (LENGTH_MEASURE( 1.000000000000000100E-005 ), #454, 'distance_accuracy_value', 'NONE');
+#542 = AXIS2_PLACEMENT_3D ( 'NONE', #514, #516, #690 ) ;
+#543 = CARTESIAN_POINT ( 'NONE',  ( 6.999999999999995600, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#544 = CARTESIAN_POINT ( 'NONE',  ( -3.973553830098795400, 0.5284757378160585000, 109.2573821431475500 ) ) ;
+#545 = CARTESIAN_POINT ( 'NONE',  ( -3.857637001861020500E-015, 4.000000000000000000, 110.0000000000000000 ) ) ;
+#546 = EDGE_CURVE ( 'NONE', #420, #47, #455, .T. ) ;
+#547 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#548 = VECTOR ( 'NONE', #497, 1000.000000000000000 ) ;
+#549 = VERTEX_POINT ( 'NONE', #555 ) ;
+#550 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000002700, 6.999999999999999100, 99.00000000000000000 ) ) ;
+#551 = ORIENTED_EDGE ( 'NONE', *, *, #406, .F. ) ;
+#552 = CARTESIAN_POINT ( 'NONE',  ( 2.643548114540709400, 3.013306438673023700, 109.6793377313036800 ) ) ;
+#553 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#554 = COLOUR_RGB ( '',0.7921568627450980000, 0.8196078431372548800, 0.9333333333333333500 ) ;
+#555 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, -6.999999999999999100, 110.0000000000000000 ) ) ;
+#556 = VERTEX_POINT ( 'NONE', #441 ) ;
+#557 = CARTESIAN_POINT ( 'NONE',  ( 3.593225304060824000, -1.776661601107755600, 109.3971151026071700 ) ) ;
+#558 = CLOSED_SHELL ( 'NONE', ( #530, #112, #59, #107, #290, #324, #161, #307, #23, #266, #534, #607, #482, #270, #480, #298, #562, #626, #122, #327 ) ) ;
+#559 = ORIENTED_EDGE ( 'NONE', *, *, #275, .T. ) ;
+#560 = CARTESIAN_POINT ( 'NONE',  ( 4.000000000000000000, 4.917931322840523600E-016, 109.2469507659596000 ) ) ;
+#561 = EDGE_CURVE ( 'NONE', #47, #165, #586, .T. ) ;
+#562 = ADVANCED_FACE ( 'NONE', ( #67 ), #312, .T. ) ;
+#563 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#564 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 6.999999999999999100, 110.0000000000000000 ) ) ;
+#565 = VERTEX_POINT ( 'NONE', #301 ) ;
+#566 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, -11.00000000000000000, 99.00000000000000000 ) ) ;
+#567 = PLANE ( 'NONE',  #139 ) ;
+#568 = VECTOR ( 'NONE', #244, 1000.000000000000000 ) ;
+#569 =( NAMED_UNIT ( * ) PLANE_ANGLE_UNIT ( ) SI_UNIT ( $, .RADIAN. ) );
+#570 = FACE_OUTER_BOUND ( 'NONE', #487, .T. ) ;
+#571 = ORIENTED_EDGE ( 'NONE', *, *, #101, .F. ) ;
+#572 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#573 = SURFACE_SIDE_STYLE ('',( #221 ) ) ;
+#574 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#575 = SHAPE_DEFINITION_REPRESENTATION ( #608, #423 ) ;
+#576 = EDGE_CURVE ( 'NONE', #2, #55, #463, .T. ) ;
+#577 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, 11.00000000000000000, 99.00000000000002800 ) ) ;
+#578 = CIRCLE ( 'NONE', #337, 7.000000000000006200 ) ;
+#579 = ORIENTED_EDGE ( 'NONE', *, *, #592, .T. ) ;
+#580 = ORIENTED_EDGE ( 'NONE', *, *, #602, .T. ) ;
+#581 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, -11.00000000000000000, 0.9999999999999961100 ) ) ;
+#582 = CARTESIAN_POINT ( 'NONE',  ( -1.778353481004134400, -3.592396256760320500, 109.8580124229783500 ) ) ;
+#583 = AXIS2_PLACEMENT_3D ( 'NONE', #235, #443, #294 ) ;
+#584 = PRODUCT_CONTEXT ( 'NONE', #304, 'mechanical' ) ;
+#585 = LINE ( 'NONE', #193, #116 ) ;
+#586 = LINE ( 'NONE', #186, #568 ) ;
+#587 = EDGE_CURVE ( 'NONE', #618, #114, #399, .T. ) ;
+#588 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 11.00000000000000000, 106.0000000000000100 ) ) ;
+#589 = LINE ( 'NONE', #594, #475 ) ;
+#590 = ORIENTED_EDGE ( 'NONE', *, *, #101, .T. ) ;
+#591 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#592 = EDGE_CURVE ( 'NONE', #387, #252, #695, .T. ) ;
+#593 = EDGE_LOOP ( 'NONE', ( #58, #551, #259, #533 ) ) ;
+#594 = CARTESIAN_POINT ( 'NONE',  ( 10.99999999999997200, 6.999999999999999100, 0.9999999999999961100 ) ) ;
+#595 = CIRCLE ( 'NONE', #461, 7.000000000000006200 ) ;
+#596 = PLANE ( 'NONE',  #260 ) ;
+#597 = LINE ( 'NONE', #659, #438 ) ;
+#598 = ORIENTED_EDGE ( 'NONE', *, *, #587, .T. ) ;
+#599 = AXIS2_PLACEMENT_3D ( 'NONE', #13, #227, #281 ) ;
+#600 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #517, #372, #650, #521, #422, #528, #418, #210, #3, #472, #156, #205, #582, #368, #318, #261, #102, #471 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.0000000000000000000, 0.0007886451959710099600, 0.001577290391942020400, 0.002365935587913030300, 0.003154580783884041600, 0.003943225979855052000, 0.004731871175826060600, 0.005520516371797071000, 0.006309161567768081400 ),
+ .UNSPECIFIED. ) ;
+#601 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, 1.000000000000000000 ) ) ;
+#602 = EDGE_CURVE ( 'NONE', #276, #697, #319, .T. ) ;
+#603 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#604 = LINE ( 'NONE', #253, #453 ) ;
+#605 = LINE ( 'NONE', #26, #696 ) ;
+#606 = CARTESIAN_POINT ( 'NONE',  ( -2.646103808653462500, 3.010880806597658200, 109.6786762412961700 ) ) ;
+#607 = ADVANCED_FACE ( 'NONE', ( #163 ), #9, .T. ) ;
+#608 = PRODUCT_DEFINITION_SHAPE ( 'NONE', 'NONE',  #445 ) ;
+#609 = CARTESIAN_POINT ( 'NONE',  ( -11.00000000000000900, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#610 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#611 = VERTEX_POINT ( 'NONE', #147 ) ;
+#612 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#613 = ORIENTED_EDGE ( 'NONE', *, *, #365, .F. ) ;
+#614 = AXIS2_PLACEMENT_3D ( 'NONE', #45, #199, #416 ) ;
+#615 = CARTESIAN_POINT ( 'NONE',  ( 3.973837791554162700, 0.5277685752004033200, 109.2572761766196700 ) ) ;
+#616 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#617 = ORIENTED_EDGE ( 'NONE', *, *, #207, .T. ) ;
+#618 = VERTEX_POINT ( 'NONE', #41 ) ;
+#619 = CARTESIAN_POINT ( 'NONE',  ( 4.000000000000000900, -0.2626098354430774200, 109.2469507659596100 ) ) ;
+#620 = VERTEX_POINT ( 'NONE', #24 ) ;
+#621 = EDGE_CURVE ( 'NONE', #611, #618, #595, .T. ) ;
+#622 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000008000, 6.999999999999999100, 1.000000000000000900 ) ) ;
+#623 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#624 = EDGE_LOOP ( 'NONE', ( #328, #204, #202, #105, #314 ) ) ;
+#625 = CARTESIAN_POINT ( 'NONE',  ( 1.045519280012371200, 3.869847101563124600, 109.9532362729401700 ) ) ;
+#626 = ADVANCED_FACE ( 'NONE', ( #52, #190 ), #464, .T. ) ;
+#627 = AXIS2_PLACEMENT_3D ( 'NONE', #249, #693, #151 ) ;
+#628 = CIRCLE ( 'NONE', #542, 10.99999999999999600 ) ;
+#629 = CARTESIAN_POINT ( 'NONE',  ( -4.844609999999999700E-015, 11.00000000000000000, 99.00000000000002800 ) ) ;
+#630 = B_SPLINE_CURVE_WITH_KNOTS ( 'NONE', 3,
+ ( #85, #131, #504, #395, #177, #78, #288, #405, #450, #137, #681, #184, #557, #187, #676, #442, #619, #672 ),
+ .UNSPECIFIED., .F., .F.,
+ ( 4, 2, 2, 2, 2, 2, 2, 2, 4 ),
+ ( 0.006309161567768081400, 0.007097326563375917300, 0.007885491558983753100, 0.008673656554591588000, 0.009461821550199422900, 0.01024998654580725800, 0.01103815154141509500, 0.01182631653702293000, 0.01261448153263076400 ),
+ .UNSPECIFIED. ) ;
+#631 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 1.000000000000000000, 0.0000000000000000000 ) ) ;
+#632 = CIRCLE ( 'NONE', #477, 5.099999999999999600 ) ;
+#633 = ORIENTED_EDGE ( 'NONE', *, *, #657, .F. ) ;
+#634 = EDGE_CURVE ( 'NONE', #519, #549, #628, .T. ) ;
+#635 = EDGE_CURVE ( 'NONE', #420, #556, #677, .T. ) ;
+#636 = CIRCLE ( 'NONE', #485, 7.000000000000006200 ) ;
+#637 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -1.000000000000000000, -0.0000000000000000000 ) ) ;
+#638 = ORIENTED_EDGE ( 'NONE', *, *, #428, .F. ) ;
+#639 = CARTESIAN_POINT ( 'NONE',  ( -4.844609999999999700E-015, -11.00000000000000000, 99.00000000000002800 ) ) ;
+#640 = ORIENTED_EDGE ( 'NONE', *, *, #466, .F. ) ;
+#641 = FILL_AREA_STYLE_COLOUR ( '', #554 ) ;
+#642 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#643 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #195 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #409, #460, #687 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#644 = ORIENTED_EDGE ( 'NONE', *, *, #303, .T. ) ;
+#645 = CARTESIAN_POINT ( 'NONE',  ( -7.000000000000002700, 11.00000000000000000, 99.00000000000000000 ) ) ;
+#646 = LINE ( 'NONE', #44, #238 ) ;
+#647 = EDGE_CURVE ( 'NONE', #153, #182, #646, .T. ) ;
+#648 = TOROIDAL_SURFACE ( 'NONE', #380, 6.999999999999999100, 4.000000000000000000 ) ;
+#649 = VERTEX_POINT ( 'NONE', #141 ) ;
+#650 = CARTESIAN_POINT ( 'NONE',  ( -3.973566070947031700, -0.5287663779277485000, 109.2573786592520700 ) ) ;
+#651 = DIRECTION ( 'NONE',  ( -0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#652 = ORIENTED_EDGE ( 'NONE', *, *, #374, .F. ) ;
+#653 = CIRCLE ( 'NONE', #100, 4.000000000000000000 ) ;
+#654 = AXIS2_PLACEMENT_3D ( 'NONE', #688, #631, #414 ) ;
+#655 = CIRCLE ( 'NONE', #113, 5.099999999999999600 ) ;
+#656 = ORIENTED_EDGE ( 'NONE', *, *, #621, .F. ) ;
+#657 = EDGE_CURVE ( 'NONE', #2, #7, #604, .T. ) ;
+#658 = CARTESIAN_POINT ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 66.00000000000000000 ) ) ;
+#659 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 0.0000000000000000000, 110.0000000000000000 ) ) ;
+#660 = VECTOR ( 'NONE', #148, 1000.000000000000000 ) ;
+#661 = ORIENTED_EDGE ( 'NONE', *, *, #62, .F. ) ;
+#662 =( GEOMETRIC_REPRESENTATION_CONTEXT ( 3 ) GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT ( ( #541 ) ) GLOBAL_UNIT_ASSIGNED_CONTEXT ( ( #454, #569, #246 ) ) REPRESENTATION_CONTEXT ( 'NONE', 'WORKASPACE' ) );
+#663 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#664 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#665 = ORIENTED_EDGE ( 'NONE', *, *, #634, .F. ) ;
+#666 = EDGE_CURVE ( 'NONE', #165, #649, #523, .T. ) ;
+#667 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#668 = VECTOR ( 'NONE', #300, 1000.000000000000000 ) ;
+#669 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, 0.0000000000000000000, 99.00000000000000000 ) ) ;
+#670 = EDGE_CURVE ( 'NONE', #519, #493, #585, .T. ) ;
+#671 = CARTESIAN_POINT ( 'NONE',  ( 3.466535936429886900, 2.012562019861888500, 109.4405984363938600 ) ) ;
+#672 = CARTESIAN_POINT ( 'NONE',  ( 4.000000000000000000, 4.917931322840523600E-016, 109.2469507659596000 ) ) ;
+#673 = DIRECTION ( 'NONE',  ( -1.000000000000000000, 0.0000000000000000000, 0.0000000000000000000 ) ) ;
+#674 = ORIENTED_EDGE ( 'NONE', *, *, #351, .F. ) ;
+#675 = PRESENTATION_LAYER_ASSIGNMENT (  '', '', ( #272 ) ) ;
+#676 = CARTESIAN_POINT ( 'NONE',  ( 3.869797237232395700, -1.046269787596465500, 109.2969788262583300 ) ) ;
+#677 = CIRCLE ( 'NONE', #325, 4.000000000000000000 ) ;
+#678 = LINE ( 'NONE', #357, #159 ) ;
+#679 = PLANE ( 'NONE',  #211 ) ;
+#680 = ORIENTED_EDGE ( 'NONE', *, *, #42, .F. ) ;
+#681 = CARTESIAN_POINT ( 'NONE',  ( 3.178669460700662700, -2.442051176766828900, 109.5318129922902700 ) ) ;
+#682 = ORIENTED_EDGE ( 'NONE', *, *, #365, .T. ) ;
+#683 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#684 = CYLINDRICAL_SURFACE ( 'NONE', #417, 5.099999999999999600 ) ;
+#685 = FACE_OUTER_BOUND ( 'NONE', #29, .T. ) ;
+#686 = ORIENTED_EDGE ( 'NONE', *, *, #225, .T. ) ;
+#687 =( NAMED_UNIT ( * ) SI_UNIT ( $, .STERADIAN. ) SOLID_ANGLE_UNIT ( ) );
+#688 = CARTESIAN_POINT ( 'NONE',  ( -3.857636999999999900E-015, -6.999999999999999100, 99.00000000000000000 ) ) ;
+#689 = AXIS2_PLACEMENT_3D ( 'NONE', #398, #447, #183 ) ;
+#690 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, 1.000000000000000000 ) ) ;
+#691 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, -0.0000000000000000000, -1.000000000000000000 ) ) ;
+#692 = VERTEX_POINT ( 'NONE', #407 ) ;
+#693 = DIRECTION ( 'NONE',  ( 0.0000000000000000000, 0.0000000000000000000, -1.000000000000000000 ) ) ;
+#694 = EDGE_CURVE ( 'NONE', #379, #439, #429, .T. ) ;
+#695 = CIRCLE ( 'NONE', #689, 4.000000000000000000 ) ;
+#696 = VECTOR ( 'NONE', #612, 1000.000000000000000 ) ;
+#697 = VERTEX_POINT ( 'NONE', #196 ) ;
+#698 = ORIENTED_EDGE ( 'NONE', *, *, #561, .T. ) ;
+ENDSEC;
+END-ISO-10303-21;