From ca9faaf5d20eefb437b3c8b01a5ae664fc519a26 Mon Sep 17 00:00:00 2001 From: ma deuce Date: Fri, 19 Aug 2016 16:17:33 -0700 Subject: [PATCH] Fixing typo and adding clarity to Bolt AR-15 Lower Reciever Readme.md by nils. --- Rifles/AR-15_Bolt_Lower_Receiver_v2.0-RollTroll/Readme.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Rifles/AR-15_Bolt_Lower_Receiver_v2.0-RollTroll/Readme.md b/Rifles/AR-15_Bolt_Lower_Receiver_v2.0-RollTroll/Readme.md index f62a0a5..9cb90c8 100644 --- a/Rifles/AR-15_Bolt_Lower_Receiver_v2.0-RollTroll/Readme.md +++ b/Rifles/AR-15_Bolt_Lower_Receiver_v2.0-RollTroll/Readme.md @@ -33,7 +33,7 @@ Print/make 1 of all: * Buffer tower should be printed flat, perpendicular to the print bed, as if the stock were vertical, * Grip part should be printed on its side. -* Mag well front should be printed with the pivot holes away from the print bed. So that the face that is profiled for the * mag well is against the print bed. +* Mag well front should be printed with the pivot holes away from the print bed so that the interior face that is profiled for the mag well is against the print bed. * Mag well back should be printed with the largest falt side against the print bed. This is the side opposite the mag well. * Both mag well sides should be printed on their largest flat face, the side opposite the mag well. * Both left and right (rear) sides should be printed with the internal facing (flattest) sides against the print bed.