36 lines
1.3 KiB
Markdown
36 lines
1.3 KiB
Markdown
# N0mad's madsen m50 extra long magazine extension
|
|
|
|
#### Author
|
|
n0mad
|
|
|
|
#### Version
|
|
8.0
|
|
|
|
#### License
|
|
Copyright 2018 distributed under the GNU General Public License v3.0 (GPLv3).
|
|
|
|
#### Release Date
|
|
2018/09/18
|
|
|
|
#### Description
|
|
This is a two part magazine extension for madsen m50 magazines.
|
|
|
|
#### Test Record
|
|
This was tested on with a madsen m50 submachine gun. As of version 8 it feeds and runs when loaded up to 49 rounds (+17).
|
|
|
|
#### Printing
|
|
* All printed parts were printed out of PETG, with an infill of 25%. Abs should also work.
|
|
* No support material needed
|
|
* Print both pieces on their backs to preven the need of infill.
|
|
* Print barrel standing on it rear end.
|
|
|
|
#### Finishing
|
|
* Aquire six bolts of the appropriate diameter and length. I used chicago screws and bolts for a cleaner finish.
|
|
* Drill out holes to fit bolt size.
|
|
* A longer magazine spring will be required. This extension should work with extended glock springs.
|
|
* I used the one found here. https://taccom3g.com/product/taccom-spring-kits/ The bolts and chicago screws will also work.
|
|
* The existing follower will need to be removed and affixed the the glock spring.
|
|
* Clamp around magazine bolt down, no floor plate needed.
|
|
|
|
#### DISCLAIMER
|
|
Use this information at your own risk and responsibility. |