fosscad-repo/Rifles/MP5_A3-Tailhook_Adapter_for_Retractable_Stock-unnamed

MP5 A3-F Tailhook Adapter for Retractable Stock

Author

unnamed

Version

1.0

Description

This is an adapter to attach the Gear Head Works style Tailhook to the HK MP5 A3-F retractable stock. This is not compatible with the K model. This adapter was inpsired by Flood's Tailhook adapter for MP5 A3 retractable stock (see video below).

Parts and Tools List

• 5/32 drill bil1
• 2 10-32 bolts
• 1 10-32 tap
• 1 Hacksaw or Bandsaw

Instructions

• Trim off the excess material from the stock for clearance, as seen in Renders/picture5.png and Renders/picture6.png. Note you will be cutting into some metal.
• Cut the entire rubber butt pad off.
• Use the Adapter as a drill guide and drill and tap the holes in the back of the stock where the rubber butt pad use to be. There is a piece of metal in rear of the stock, as seen in Renders/picture3.png and Renders/picture7.png, so you will be threading metal holes for your bolts.
• Install the adapter to the end of the stock with the bolts.

Video Instructions by Flood: https://www.youtube.com/watch?v=v91Tww7vVFc