Mirrors
/
fosscad-repo
mirror of https://github.com/maduce/fosscad-repo.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
fosscad-repo/Pistols/9mm_AP-9_Pistol-v1.2-derwood
History
R3DG0L1AD 7f94bc87fc
Add files via upload 		2018-10-23 02:47:12 -06:00
..
FCStd Formatting Folder name. 2018-08-09 17:06:37 -07:00
Optional Added sight rail and optional parts/upgrades 2018-10-23 02:40:23 -06:00
Renders Formatting Folder name. 2018-08-09 17:06:37 -07:00
STEP Formatting Folder name. 2018-08-09 17:06:37 -07:00
STL Add files via upload 2018-10-23 02:45:56 -06:00
README.md Add files via upload 2018-10-23 02:47:12 -06:00

README.md

Shuty AP-9 9mm Pistol

Author

Derwood

Version

1.2

Description

FINALLY! This is the AP-9 9mm Pistol by Derwood. The AP-9 is inspired by the Shuty MP-1 and Gluty, also by Derwood. Special thanks to Warfairy for his contributions to the lower receiver for this project. The upper, bolt design and ejector have been improved and the overall design is easier to make.

Note (Optional): Derwood also included a STEP/Gluty_Parts folder for those wanting to use the Gluty lower instead of the AP-9 Lower receiver. Enjoy!

Non-printed parts list

  • AR15 buffer spring
  • AR15 FCG
  • Lonewolf glock 17 replacement barrel
  • Magpul glock 17 magazine
  • Secondary buffer spring - Hillman 11/16 x 072wg bin #62 part #540186
  • #8 x 1.5 inch phillips head sheet metal screw - 4
  • #6 x 1.5 inch hex head sheet metal screw - 4
  • #6 x 1 inch plillips head sheet metal screw - 2
  • #10 x 1.25 inch phillips head metal screw - 1
  • 3/4 inch x 8.5 inch steel dowel
  • 3/4 inch x 51.15mm steel dowel
  • Firing pin - 1/4 inch steel dowel

Instructions

Build Notes

  • firing pin hole is 9/64
  • The bolt handle is #8-32 threaded rod
  • after you drill the hole in the small part of the bolt use the plastic guide you print to mark the centerline on the bolt pieces for a quick alignment for *welding
  • #8 x 1.5-inch hex head sheet metal screw can be used to hold the barrel retainer on if you cannot find #6
  • slightly countersink the holes where the plastic meets plastic.
  • The AR15 FCG needs to have a rounded top hammer
  • Flatten the front of the bolt after you have glued it together with a file or lathe.

Changelog

  • v1.2a:

    • Added AP9 sight rail.
    • Added optional quad rail barrel retainer(replaces derwoods barrel retainer).
    • Added optional arm brace for 36mm buffer.
    • Added optional reinforced buffer tube and attachable M4 stock(replaces derwoods buffer tube).
    • Added optional improved mag release pivot retainer with 2 screw holes(replaces derwoods mag release pivot retainer).
    • Added optional foregrip for use with quad rail barrel retainer.
    • Added optional skeleton AR-15 grip.
    • Added optional skeleton foregrip.
    • Added optional 45 degree selector switch since the regular 90 degrees doesn't give much room.
    • Added derwoodvw's AP9 video build tutorial just in case it is purged. * Print with same settings as derwoods parts.
      • Rafts: Yes / Resolution: .15 / Infill: 100%
      • Added to maduce's fosscad-repo by R3DG0L1AD but most credit goes to thingiverse users Matt19888, m42quik, and idy26.

  • v1.2:

    • Upper - accepts glock and after market barrels. beveled exterior edges to reduce support. Added keepers to eliminate ejector jumping out of pocket.
    • Buffer Tube - eliminated need for interior support
    • Ejector - eliminated flexing
    • Ejector Pivot - now has two anchoring points for more stability

  • v1.1 - Upgrade to a steel tip bolt housing and new upper for OEM glock barrel.