This PR fixes javascript errors when an anonymous user visits the
migration page.
It also makes task view checking more restrictive.
The router moved from `/user/task/{id}/status` to
`/username/reponame/-/migrate/status` because it's a migrate status.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
This PR do some minor improvements for head branch display on pull
request view UI.
- [x] Remove the link if the head branch has been deleted with a
tooltip, so that users will not result in a 404 page
- [x] Display a label if this pull request is an agit based one.
I'm new to go and contributing to gitea, your guidance is much
appreciated.
This is meant to solve https://github.com/go-gitea/gitea/issues/13309
Previously, closed issues would not be shown under new issues in the
activity tab, even if they were newly created.
changes:
* Split out newlyCreatedIssues from issuesForActivityStatement to count
both currently open and closed issues.
* Use a seperate function to count active issues to prevent
double-counting issues after the above change.
Result is that new issues that have been closed are shown both under
"new" and "closed".
Signed-off-by: Timon van der Berg <tmnvanderberg@gmail.com>
A regression in #31924 caused there to be two `issues.review.comment`
keys in the English language locale file, leading to a problem when
reading PR review histories that contain comments.
This snapshot addresses this by making the newer key unique.
This will allow instance admins to view signup pattern patterns for
public instances. It is modelled after discourse, mastodon, and
MediaWiki's approaches.
Note: This has privacy implications, but as the above-stated open-source
projects take this approach, especially MediaWiki, which I have no doubt
looked into this thoroughly, it is likely okay for us, too. However, I
would be appreciative of any feedback on how this could be improved.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Fix#31730
This PR rewrote the function `PublicKeysAreExternallyManaged` with a
simple test. The new function removed the loop to make it more readable.
When transferring repositories that have issues linked to a project
board to another organization, the issues remain associated with the
original project board. This causes the columns in the project board to
become bugged, making it difficult to move other issues in or out of the
affected columns. As a solution, I removed the issue relations since the
other organization does not have this project table.
Fix for #31538
Co-authored-by: Jason Song <i@wolfogre.com>
Support compression for Actions logs to save storage space and
bandwidth. Inspired by
https://github.com/go-gitea/gitea/issues/24256#issuecomment-1521153015
The biggest challenge is that the compression format should support
[seekable](https://github.com/facebook/zstd/blob/dev/contrib/seekable_format/zstd_seekable_compression_format.md).
So when users are viewing a part of the log lines, Gitea doesn't need to
download the whole compressed file and decompress it.
That means gzip cannot help here. And I did research, there aren't too
many choices, like bgzip and xz, but I think zstd is the most popular
one. It has an implementation in Golang with
[zstd](https://github.com/klauspost/compress/tree/master/zstd) and
[zstd-seekable-format-go](https://github.com/SaveTheRbtz/zstd-seekable-format-go),
and what is better is that it has good compatibility: a seekable format
zstd file can be read by a regular zstd reader.
This PR introduces a new package `zstd` to combine and wrap the two
packages, to provide a unified and easy-to-use API.
And a new setting `LOG_COMPRESSION` is added to the config, although I
don't see any reason why not to use compression, I think's it's a good
idea to keep the default with `none` to be consistent with old versions.
`LOG_COMPRESSION` takes effect for only new log files, it adds `.zst` as
an extension to the file name, so Gitea can determine if it needs
decompression according to the file name when reading. Old files will
keep the format since it's not worth converting them, as they will be
cleared after #31735.
<img width="541" alt="image"
src="https://github.com/user-attachments/assets/e9598764-a4e0-4b68-8c2b-f769265183c9">
If the assign the pull request review to a team, it did not show the
members of the team in the "requested_reviewers" field, so the field was
null. As a solution, I added the team members to the array.
fix#31764
Fix#31657.
According to the
[doc](https://docs.github.com/en/actions/writing-workflows/workflow-syntax-for-github-actions#onschedule)
of GitHub Actions, The timezone for cron should be UTC, not the local
timezone. And Gitea Actions doesn't have any reasons to change this, so
I think it's a bug.
However, Gitea Actions has extended the syntax, as it supports
descriptors like `@weekly` and `@every 5m`, and supports specifying the
timezone like `TZ=UTC 0 10 * * *`. So we can make it use UTC only when
the timezone is not specified, to be compatible with GitHub Actions, and
also respect the user's specified.
It does break the feature because the times to run tasks would be
changed, and it may confuse users. So I don't think we should backport
this.
## ⚠️ BREAKING ⚠️
If the server's local time zone is not UTC, a scheduled task would run
at a different time after upgrading Gitea to this version.
Fix#31707.
Also related to #31715.
Some Actions resources could has different types of ownership. It could
be:
- global: all repos and orgs/users can use it.
- org/user level: only the org/user can use it.
- repo level: only the repo can use it.
There are two ways to distinguish org/user level from repo level:
1. `{owner_id: 1, repo_id: 2}` for repo level, and `{owner_id: 1,
repo_id: 0}` for org level.
2. `{owner_id: 0, repo_id: 2}` for repo level, and `{owner_id: 1,
repo_id: 0}` for org level.
The first way seems more reasonable, but it may not be true. The point
is that although a resource, like a runner, belongs to a repo (it can be
used by the repo), the runner doesn't belong to the repo's org (other
repos in the same org cannot use the runner). So, the second method
makes more sense.
And the first way is not user-friendly to query, we must set the repo id
to zero to avoid wrong results.
So, #31715 should be right. And the most simple way to fix#31707 is
just:
```diff
- shared.GetRegistrationToken(ctx, ctx.Repo.Repository.OwnerID, ctx.Repo.Repository.ID)
+ shared.GetRegistrationToken(ctx, 0, ctx.Repo.Repository.ID)
```
However, it is quite intuitive to set both owner id and repo id since
the repo belongs to the owner. So I prefer to be compatible with it. If
we get both owner id and repo id not zero when creating or finding, it's
very clear that the caller want one with repo level, but set owner id
accidentally. So it's OK to accept it but fix the owner id to zero.
Fix#26685
If a commit status comes from Gitea Actions and the user cannot access
the repo's actions unit (the user does not have the permission or the
actions unit is disabled), a 404 page will occur after clicking the
"Details" link. We should hide the "Details" link in this case.
<img
src="https://github.com/go-gitea/gitea/assets/15528715/68361714-b784-4bb5-baab-efde4221f466"
width="400px" />
This leverages the existing `sync_external_users` cron job to
synchronize the `IsActive` flag on users who use an OAuth2 provider set
to synchronize. This synchronization is done by checking for expired
access tokens, and using the stored refresh token to request a new
access token. If the response back from the OAuth2 provider is the
`invalid_grant` error code, the user is marked as inactive. However, the
user is able to reactivate their account by logging in the web browser
through their OAuth2 flow.
Also changed to support this is that a linked `ExternalLoginUser` is
always created upon a login or signup via OAuth2.
### Notes on updating permissions
Ideally, we would also refresh permissions from the configured OAuth
provider (e.g., admin, restricted and group mappings) to match the
implementation of LDAP. However, the OAuth library used for this `goth`,
doesn't seem to support issuing a session via refresh tokens. The
interface provides a [`RefreshToken`
method](https://github.com/markbates/goth/blob/master/provider.go#L20),
but the returned `oauth.Token` doesn't implement the `goth.Session` we
would need to call `FetchUser`. Due to specific implementations, we
would need to build a compatibility function for every provider, since
they cast to concrete types (e.g.
[Azure](https://github.com/markbates/goth/blob/master/providers/azureadv2/azureadv2.go#L132))
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
#26996
Added default sorting for milestones by name.
Additional, name for sorting closestduedate and furthestduedate was
broken, so I fixed it.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
We have some instances that only allow using an external authentication
source for authentication. In this case, users changing their email,
password, or linked OpenID connections will not have any effect, and
we'd like to prevent showing that to them to prevent confusion.
Included in this are several changes to support this:
* A new setting to disable user managed authentication credentials
(email, password & OpenID connections)
* A new setting to disable user managed MFA (2FA codes & WebAuthn)
* Fix an issue where some templates had separate logic for determining
if a feature was disabled since it didn't check the globally disabled
features
* Hide more user setting pages in the navbar when their settings aren't
enabled
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Before we had just the plain mail address as recipient. But now we
provide additional Information for the Mail clients.
---
*Sponsored by Kithara Software GmbH*
Fixes#22722
### Problem
Currently, it is not possible to force push to a branch with branch
protection rules in place. There are often times where this is necessary
(CI workflows/administrative tasks etc).
The current workaround is to rename/remove the branch protection,
perform the force push, and then reinstate the protections.
### Solution
Provide an additional section in the branch protection rules to allow
users to specify which users with push access can also force push to the
branch. The default value of the rule will be set to `Disabled`, and the
UI is intuitive and very similar to the `Push` section.
It is worth noting in this implementation that allowing force push does
not override regular push access, and both will need to be enabled for a
user to force push.
This applies to manual force push to a remote, and also in Gitea UI
updating a PR by rebase (which requires force push)
This modifies the `BranchProtection` API structs to add:
- `enable_force_push bool`
- `enable_force_push_whitelist bool`
- `force_push_whitelist_usernames string[]`
- `force_push_whitelist_teams string[]`
- `force_push_whitelist_deploy_keys bool`
### Updated Branch Protection UI:
<img width="943" alt="image"
src="https://github.com/go-gitea/gitea/assets/79623665/7491899c-d816-45d5-be84-8512abd156bf">
### Pull Request `Update branch by Rebase` option enabled with source
branch `test` being a protected branch:
<img width="1038" alt="image"
src="https://github.com/go-gitea/gitea/assets/79623665/57ead13e-9006-459f-b83c-7079e6f4c654">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
closes#22015
After adding a passkey, you can now simply login with it directly by
clicking `Sign in with a passkey`.
Note for testing. You need to run gitea using `https` to get the full
passkeys experience.
---------
Co-authored-by: silverwind <me@silverwind.io>
This PR enhances the labels handling in issue_search by optimizing the
SQL query and de-duplicate the IDs when generating the query string.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.com>
1. There are already global "unit consts", no need to use context data, which is fragile
2. Remove the "String()" method from "unit", it would only cause rendering problems in templates
---------
Co-authored-by: silverwind <me@silverwind.io>
Lunny Xiao