Most time, when invoking `git.OpenRepository`, `objectFormat` will not
be used, so it's a waste to invoke commandline to get the object format.
This PR make it a lazy operation, only invoke that when necessary.
Close#29509
Windows, unlike Linux, does not have signal-specified exit codes.
Therefore, we should add a Windows-specific check for Windows. If we
don't do this, the logs will always show a failed status, even though
the command actually works correctly.
If you check the Go source code in exec_windows.go, you will see that it
always returns exit code 1.
The exit code 1 does not exclusively signify a SIGNAL KILL; it can
indicate any issue that occurs when a program fails.
Fixes#29101
Related #29298
Discard all read data to prevent misinterpreting existing data. Some
discard calls were missing in error cases.
---------
Co-authored-by: yp05327 <576951401@qq.com>
Fixes the reason why #29101 is hard to replicate.
Related #29297
Create a repo with a file with minimum size 4097 bytes (I use 10000) and
execute the following code:
```go
gitRepo, err := gitrepo.OpenRepository(db.DefaultContext, <repo>)
assert.NoError(t, err)
commit, err := gitRepo.GetCommit(<sha>)
assert.NoError(t, err)
entry, err := commit.GetTreeEntryByPath(<file>)
assert.NoError(t, err)
b := entry.Blob()
// Create a reader
r, err := b.DataAsync()
assert.NoError(t, err)
defer r.Close()
// Create a second reader
r2, err := b.DataAsync()
assert.NoError(t, err) // Should be no error but is ErrNotExist
defer r2.Close()
```
The problem is the check in `CatFileBatch`:
79217ea63c/modules/git/repo_base_nogogit.go (L81-L87)
`Buffered() > 0` is used to check if there is a "operation" in progress
at the moment. This is a problem because we can't control the internal
buffer in the `bufio.Reader`. The code above demonstrates a sequence
which initiates an operation for which the code thinks there is no
active processing. The second call to `DataAsync()` therefore reuses the
existing instances instead of creating a new batch reader.
Introduce a new function checkGitVersionCompatibility, when the git
version can't be used by Gitea, tell the end users to downgrade or
upgrade. The refactored functions are related to make the code easier to
test.
And simplify the comments for "safe.directory"
---------
Co-authored-by: delvh <dev.lh@web.de>
With this option, it is possible to require a linear commit history with
the following benefits over the next best option `Rebase+fast-forward`:
The original commits continue existing, with the original signatures
continuing to stay valid instead of being rewritten, there is no merge
commit, and reverting commits becomes easier.
Closes#24906
Replace #28849. Thanks to @yp05327 for the looking into the problem.
Fix#28840
The old behavior of newSignatureFromCommitline is not right. The new
parseSignatureFromCommitLine:
1. never fails
2. only accept one format (if there is any other, it could be easily added)
And add some tests.
## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
This should fix https://github.com/go-gitea/gitea/issues/28927
Technically older versions of Git would support this flag as well, but
per https://github.com/go-gitea/gitea/pull/28466 that's the version
where using it (object-format=sha256) left "experimental" state.
`sha1` is (currently) the default, so older clients should be unaffected
in either case.
Signed-off-by: jolheiser <john.olheiser@gmail.com>
When LFS hooks are present in gitea-repositories, operations like git
push for creating a pull request fail. These repositories are not meant
to include LFS files or git push them, that is handled separately. And
so they should not have LFS hooks.
Installing git-lfs on some systems (like Debian Linux) will
automatically set up /etc/gitconfig to create LFS hooks in repositories.
For most git commands in Gitea this is not a problem, either because
they run on a temporary clone or the git command does not create LFS
hooks.
But one case where this happens is git archive for creating repository
archives. To fix that, add a GIT_CONFIG_NOSYSTEM=1 to disable using the
system configuration for that command.
According to a comment, GIT_CONFIG_NOSYSTEM is not used for all git
commands because the system configuration can be intentionally set up
for Gitea to use.
Resolves#19810, #21148
Nowadays, cache will be used on almost everywhere of Gitea and it cannot
be disabled, otherwise some features will become unaviable.
Then I think we can just remove the option for cache enable. That means
cache cannot be disabled.
But of course, we can still use cache configuration to set how should
Gitea use the cache.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
Update golang.org/x/crypto for CVE-2023-48795 and update other packages.
`go-git` is not updated because it needs time to figure out why some
tests fail.
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
The summary string ends up in the database, and (at least) MySQL &
PostgreSQL require valid UTF8 strings.
Fixes#28178
Co-authored-by: Darrin Smart <darrin@filmlight.ltd.uk>
assert.Fail() will continue to execute the code while assert.FailNow()
not. I thought those uses of assert.Fail() should exit immediately.
PS: perhaps it's a good idea to use
[require](https://pkg.go.dev/github.com/stretchr/testify/require)
somewhere because the assert package's default behavior does not exit
when an error occurs, which makes it difficult to find the root error
reason.
This pull request is a minor code cleanup.
From the Go specification (https://go.dev/ref/spec#For_range):
> "1. For a nil slice, the number of iterations is 0."
> "3. If the map is nil, the number of iterations is 0."
`len` returns 0 if the slice or map is nil
(https://pkg.go.dev/builtin#len). Therefore, checking `len(v) > 0`
before a loop is unnecessary.
---
At the time of writing this pull request, there wasn't a lint rule that
catches these issues. The closest I could find is
https://staticcheck.dev/docs/checks/#S103
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Closes#26329
This PR adds the ability to ignore revisions specified in the
`.git-blame-ignore-revs` file in the root of the repository.
The banner is displayed in this case. I intentionally did not add a UI
way to bypass the ignore file (same behaviour as Github) but you can add
`?bypass-blame-ignore=true` to the url manually.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Giteabot