Backport #26192 by @KN4CK3R
Fixes#25918
The migration fails on MSSQL because xorm tries to update the primary
key column. xorm prevents this if the column is marked as auto
increment:
c622cdaf89/internal/statements/update.go (L38-L40)
I think it would be better if xorm would check for primary key columns
here because updating such columns is bad practice. It looks like if
that auto increment check should do the same.
fyi @lunny
Co-authored-by: KN4CK3R <admin@oldschoolhack.me>
Backport #25330
# The problem
There were many "path tricks":
* By default, Gitea uses its program directory as its work path
* Gitea tries to use the "work path" to guess its "custom path" and
"custom conf (app.ini)"
* Users might want to use other directories as work path
* The non-default work path should be passed to Gitea by GITEA_WORK_DIR
or "--work-path"
* But some Gitea processes are started without these values
* The "serv" process started by OpenSSH server
* The CLI sub-commands started by site admin
* The paths are guessed by SetCustomPathAndConf again and again
* The default values of "work path / custom path / custom conf" can be
changed when compiling
# The solution
* Use `InitWorkPathAndCommonConfig` to handle these path tricks, and use
test code to cover its behaviors.
* When Gitea's web server runs, write the WORK_PATH to "app.ini", this
value must be the most correct one, because if this value is not right,
users would find that the web UI doesn't work and then they should be
able to fix it.
* Then all other sub-commands can use the WORK_PATH in app.ini to
initialize their paths.
* By the way, when Gitea starts for git protocol, it shouldn't output
any log, otherwise the git protocol gets broken and client blocks
forever.
The "work path" priority is: WORK_PATH in app.ini > cmd arg --work-path
> env var GITEA_WORK_DIR > builtin default
The "app.ini" searching order is: cmd arg --config > cmd arg "work path
/ custom path" > env var "work path / custom path" > builtin default
## ⚠️ BREAKING
If your instance's "work path / custom path / custom conf" doesn't meet
the requirements (eg: work path must be absolute), Gitea will report a
fatal error and exit. You need to set these values according to the
error log.
Backport #23911 by @lunny
Follow up #22405Fix#20703
This PR rewrites storage configuration read sequences with some breaks
and tests. It becomes more strict than before and also fixed some
inherit problems.
- Move storage's MinioConfig struct into setting, so after the
configuration loading, the values will be stored into the struct but not
still on some section.
- All storages configurations should be stored on one section,
configuration items cannot be overrided by multiple sections. The
prioioty of configuration is `[attachment]` > `[storage.attachments]` |
`[storage.customized]` > `[storage]` > `default`
- For extra override configuration items, currently are `SERVE_DIRECT`,
`MINIO_BASE_PATH`, `MINIO_BUCKET`, which could be configured in another
section. The prioioty of the override configuration is `[attachment]` >
`[storage.attachments]` > `default`.
- Add more tests for storages configurations.
- Update the storage documentations.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
# ⚠️ Breaking
Many deprecated queue config options are removed (actually, they should
have been removed in 1.18/1.19).
If you see the fatal message when starting Gitea: "Please update your
app.ini to remove deprecated config options", please follow the error
messages to remove these options from your app.ini.
Example:
```
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].ISSUE_INDEXER_QUEUE_TYPE`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [E] Removed queue option: `[indexer].UPDATE_BUFFER_LEN`. Use new options in `[queue.issue_indexer]`
2023/05/06 19:39:22 [F] Please update your app.ini to remove deprecated config options
```
Many options in `[queue]` are are dropped, including:
`WRAP_IF_NECESSARY`, `MAX_ATTEMPTS`, `TIMEOUT`, `WORKERS`,
`BLOCK_TIMEOUT`, `BOOST_TIMEOUT`, `BOOST_WORKERS`, they can be removed
from app.ini.
# The problem
The old queue package has some legacy problems:
* complexity: I doubt few people could tell how it works.
* maintainability: Too many channels and mutex/cond are mixed together,
too many different structs/interfaces depends each other.
* stability: due to the complexity & maintainability, sometimes there
are strange bugs and difficult to debug, and some code doesn't have test
(indeed some code is difficult to test because a lot of things are mixed
together).
* general applicability: although it is called "queue", its behavior is
not a well-known queue.
* scalability: it doesn't seem easy to make it work with a cluster
without breaking its behaviors.
It came from some very old code to "avoid breaking", however, its
technical debt is too heavy now. It's a good time to introduce a better
"queue" package.
# The new queue package
It keeps using old config and concept as much as possible.
* It only contains two major kinds of concepts:
* The "base queue": channel, levelqueue, redis
* They have the same abstraction, the same interface, and they are
tested by the same testing code.
* The "WokerPoolQueue", it uses the "base queue" to provide "worker
pool" function, calls the "handler" to process the data in the base
queue.
* The new code doesn't do "PushBack"
* Think about a queue with many workers, the "PushBack" can't guarantee
the order for re-queued unhandled items, so in new code it just does
"normal push"
* The new code doesn't do "pause/resume"
* The "pause/resume" was designed to handle some handler's failure: eg:
document indexer (elasticsearch) is down
* If a queue is paused for long time, either the producers blocks or the
new items are dropped.
* The new code doesn't do such "pause/resume" trick, it's not a common
queue's behavior and it doesn't help much.
* If there are unhandled items, the "push" function just blocks for a
few seconds and then re-queue them and retry.
* The new code doesn't do "worker booster"
* Gitea's queue's handlers are light functions, the cost is only the
go-routine, so it doesn't make sense to "boost" them.
* The new code only use "max worker number" to limit the concurrent
workers.
* The new "Push" never blocks forever
* Instead of creating more and more blocking goroutines, return an error
is more friendly to the server and to the end user.
There are more details in code comments: eg: the "Flush" problem, the
strange "code.index" hanging problem, the "immediate" queue problem.
Almost ready for review.
TODO:
* [x] add some necessary comments during review
* [x] add some more tests if necessary
* [x] update documents and config options
* [x] test max worker / active worker
* [x] re-run the CI tasks to see whether any test is flaky
* [x] improve the `handleOldLengthConfiguration` to provide more
friendly messages
* [x] fine tune default config values (eg: length?)
## Code coverage:
Co-authored-by: @awkwardbunny
This PR adds a Debian package registry. You can follow [this
tutorial](https://www.baeldung.com/linux/create-debian-package) to build
a *.deb package for testing. Source packages are not supported at the
moment and I did not find documentation of the architecture "all" and
how these packages should be treated.
---------
Co-authored-by: Brian Hong <brian@hongs.me>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Enable [forbidigo](https://github.com/ashanbrown/forbidigo) linter which
forbids print statements. Will check how to integrate this with the
smallest impact possible, so a few `nolint` comments will likely be
required. Plan is to just go through the issues and either:
- Remove the print if it is nonsensical
- Add a `//nolint` directive if it makes sense
I don't plan on investigating the individual issues any further.
<details>
<summary>Initial Lint Results</summary>
```
modules/log/event.go:348:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/log/event.go:382:6: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
modules/queue/unique_queue_disk_channel_test.go:20:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("TempDir %s\n", tmpDir)
^
contrib/backport/backport.go:168:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Backporting %s to %s as %s\n", pr, localReleaseBranch, backportBranch)
^
contrib/backport/backport.go:216:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Navigate to %s to open PR\n", url)
^
contrib/backport/backport.go:223:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `xdg-open %s`\n", url)
^
contrib/backport/backport.go:233:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git push -u %s %s`\n", remote, backportBranch)
^
contrib/backport/backport.go:243:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Amending commit to prepend `Backport #%s` to body\n", pr)
^
contrib/backport/backport.go:272:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("* Attempting git cherry-pick --continue")
^
contrib/backport/backport.go:281:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Attempting git cherry-pick %s\n", sha)
^
contrib/backport/backport.go:297:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s\n", currentBranch)
^
contrib/backport/backport.go:299:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Current branch is %s - not checking out\n", currentBranch)
^
contrib/backport/backport.go:304:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* Branch %s already exists. Checking it out...\n", backportBranch)
^
contrib/backport/backport.go:308:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git checkout -b %s %s`\n", backportBranch, releaseBranch)
^
contrib/backport/backport.go:313:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s main`\n", remote)
^
contrib/backport/backport.go:316:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:319:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:321:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("* `git fetch %s %s`\n", remote, releaseBranch)
^
contrib/backport/backport.go:324:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
contrib/backport/backport.go:327:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(string(out))
^
models/unittest/fixtures.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Unsupported RDBMS for integration tests")
^
models/unittest/fixtures.go:89:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("LoadFixtures failed after retries: %v\n", err)
^
models/unittest/fixtures.go:110:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to generate sequence update: %v\n", err)
^
models/unittest/fixtures.go:117:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Failed to update sequence: %s Error: %v\n", value, err)
^
models/migrations/base/tests.go:118:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Environment variable $GITEA_ROOT not set")
^
models/migrations/base/tests.go:127:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Could not find gitea binary at %s\n", setting.AppPath)
^
models/migrations/base/tests.go:134:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set - defaulting to %s\n", giteaConf)
^
models/migrations/base/tests.go:145:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to create temporary data path %v\n", err)
^
models/migrations/base/tests.go:154:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to InitFull: %v\n", err)
^
models/migrations/v1_11/v112.go:34:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error: %v", err)
^
contrib/fixtures/fixture_generation.go:36:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("CreateTestEngine: %+v", err)
^
contrib/fixtures/fixture_generation.go:40:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("PrepareTestDatabase: %+v\n", err)
^
contrib/fixtures/fixture_generation.go:46:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", r, err)
^
contrib/fixtures/fixture_generation.go:53:5: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generate '%s': %+v\n", g.name, err)
^
contrib/fixtures/fixture_generation.go:71:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s created.\n", path)
^
services/gitdiff/gitdiff_test.go:543:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:560:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
services/gitdiff/gitdiff_test.go:577:2: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println(result)
^
modules/web/routing/logger_manager.go:34:2: use of `print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
print Printer
^
modules/doctor/paths.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Warning: can't remove temporary file: '%s'\n", tmpFile.Name())
^
tests/test_utils.go:33:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf(format+"\n", args...)
^
tests/test_utils.go:61:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Environment variable $GITEA_CONF not set, use default: %s\n", giteaConf)
^
cmd/actions.go:54:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("%s\n", respText)
^
cmd/admin_user_change_password.go:74:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s's password has been successfully updated!\n", user.Name)
^
cmd/admin_user_create.go:109:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("generated random password is '%s'\n", password)
^
cmd/admin_user_create.go:164:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created... %s\n", t.Token)
^
cmd/admin_user_create.go:167:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("New user '%s' has been successfully created!\n", username)
^
cmd/admin_user_generate_access_token.go:74:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s\n", t.Token)
^
cmd/admin_user_generate_access_token.go:76:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Access token was successfully created: %s\n", t.Token)
^
cmd/admin_user_must_change_password.go:56:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Updated %d users setting MustChangePassword to %t\n", n, mustChangePassword)
^
cmd/convert.go:44:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's character set is now utf8mb4")
^
cmd/convert.go:50:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Converted successfully, please confirm your database's all columns character is NVARCHAR now")
^
cmd/convert.go:52:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("This command can only be used with a MySQL or MSSQL database")
^
cmd/doctor.go:104:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/doctor.go:105:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Check if you are using the right config file. You can use a --config directive to specify one.")
^
cmd/doctor.go:243:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(err)
^
cmd/embedded.go:154:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(a.path)
^
cmd/embedded.go:198:3: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("Using app.ini at", setting.CustomConf)
^
cmd/embedded.go:217:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Extracting to %s:\n", destdir)
^
cmd/embedded.go:253:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s already exists; skipped.\n", dest)
^
cmd/embedded.go:275:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(dest)
^
cmd/generate.go:63:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", internalToken)
^
cmd/generate.go:66:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:78:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", JWTSecretBase64)
^
cmd/generate.go:81:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/generate.go:93:2: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", secretKey)
^
cmd/generate.go:96:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("\n")
^
cmd/keys.go:74:2: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println(strings.TrimSpace(authorizedString))
^
cmd/mailer.go:32:4: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("warning: Content is empty")
^
cmd/mailer.go:35:3: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print("Proceed with sending email? [Y/n] ")
^
cmd/mailer.go:40:4: use of `fmt.Println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Println("The mail was not sent")
^
cmd/mailer.go:49:9: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
_, _ = fmt.Printf("Sent %s email(s) to all users\n", respText)
^
cmd/serv.go:147:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Gitea: SSH has been disabled")
^
cmd/serv.go:153:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("error showing subcommand help: %v\n", err)
^
cmd/serv.go:175:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the deploy key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:177:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there! You've successfully authenticated with the principal " + key.Content + ", but Gitea does not provide shell access.")
^
cmd/serv.go:179:4: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("Hi there, " + user.Name + "! You've successfully authenticated with the key named " + key.Name + ", but Gitea does not provide shell access.")
^
cmd/serv.go:181:3: use of `println` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
println("If this is unexpected, please log in with password and setup Gitea under another user.")
^
cmd/serv.go:196:5: use of `fmt.Print` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Print(`{"type":"gitea","version":1}`)
^
tests/e2e/e2e_test.go:54:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/e2e/e2e_test.go:63:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/e2e/e2e_test.go:67:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/e2e/e2e_test.go:109:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/e2e/e2e_test.go:110:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stderr.String())
^
tests/e2e/e2e_test.go:113:6: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%v", stdout.String())
^
tests/integration/integration_test.go:124:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Error initializing test database: %v\n", err)
^
tests/integration/integration_test.go:135:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("util.RemoveAll: %v\n", err)
^
tests/integration/integration_test.go:139:3: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("Unable to remove repo indexer: %v\n", err)
^
tests/integration/repo_test.go:357:4: use of `fmt.Printf` forbidden by pattern `^(fmt\.Print(|f|ln)|print|println)$` (forbidigo)
fmt.Printf("%s", resp.Body)
^
```
</details>
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Before, there was a `log/buffer.go`, but that design is not general, and
it introduces a lot of irrelevant `Content() (string, error) ` and
`return "", fmt.Errorf("not supported")` .
And the old `log/buffer.go` is difficult to use, developers have to
write a lot of `Contains` and `Sleep` code.
The new `LogChecker` is designed to be a general approach to help to
assert some messages appearing or not appearing in logs.
A part of https://github.com/go-gitea/gitea/pull/22865
At first, I think we do not need 3 ProjectTypes, as we can check user
type, but it seems that it is not database friendly.
---------
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Replace #23350.
Refactor `setting.Database.UseMySQL` to
`setting.Database.Type.IsMySQL()`.
To avoid mismatching between `Type` and `UseXXX`.
This refactor can fix the bug mentioned in #23350, so it should be
backported.
minio/sha256-simd provides additional acceleration for SHA256 using
AVX512, SHA Extensions for x86 and ARM64 for ARM.
It provides a drop-in replacement for crypto/sha256 and if the
extensions are not available it falls back to standard crypto/sha256.
---------
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Some bugs caused by less unit tests in fundamental packages. This PR
refactor `setting` package so that create a unit test will be easier
than before.
- All `LoadFromXXX` files has been splited as two functions, one is
`InitProviderFromXXX` and `LoadCommonSettings`. The first functions will
only include the code to create or new a ini file. The second function
will load common settings.
- It also renames all functions in setting from `newXXXService` to
`loadXXXSetting` or `loadXXXFrom` to make the function name less
confusing.
- Move `XORMLog` to `SQLLog` because it's a better name for that.
Maybe we should finally move these `loadXXXSetting` into the `XXXInit`
function? Any idea?
---------
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: delvh <dev.lh@web.de>
Add a new "exclusive" option per label. This makes it so that when the
label is named `scope/name`, no other label with the same `scope/`
prefix can be set on an issue.
The scope is determined by the last occurence of `/`, so for example
`scope/alpha/name` and `scope/beta/name` are considered to be in
different scopes and can coexist.
Exclusive scopes are not enforced by any database rules, however they
are enforced when editing labels at the models level, automatically
removing any existing labels in the same scope when either attaching a
new label or replacing all labels.
In menus use a circle instead of checkbox to indicate they function as
radio buttons per scope. Issue filtering by label ensures that only a
single scoped label is selected at a time. Clicking with alt key can be
used to remove a scoped label, both when editing individual issues and
batch editing.
Label rendering refactor for consistency and code simplification:
* Labels now consistently have the same shape, emojis and tooltips
everywhere. This includes the label list and label assignment menus.
* In label list, show description below label same as label menus.
* Don't use exactly black/white text colors to look a bit nicer.
* Simplify text color computation. There is no point computing luminance
in linear color space, as this is a perceptual problem and sRGB is
closer to perceptually linear.
* Increase height of label assignment menus to show more labels. Showing
only 3-4 labels at a time leads to a lot of scrolling.
* Render all labels with a new RenderLabel template helper function.
Label creation and editing in multiline modal menu:
* Change label creation to open a modal menu like label editing.
* Change menu layout to place name, description and colors on separate
lines.
* Don't color cancel button red in label editing modal menu.
* Align text to the left in model menu for better readability and
consistent with settings layout elsewhere.
Custom exclusive scoped label rendering:
* Display scoped label prefix and suffix with slightly darker and
lighter background color respectively, and a slanted edge between them
similar to the `/` symbol.
* In menus exclusive labels are grouped with a divider line.
---------
Co-authored-by: Yarden Shoham <hrsi88@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Unfortunately #20896 does not completely prevent Data too long issues
and GPGKeyImport needs to be increased too.
Fix#22896
Signed-off-by: Andrew Thornton <art27@cantab.net>
Original Issue: https://github.com/go-gitea/gitea/issues/22102
This addition would be a big benefit for design and art teams using the
issue tracking.
The preview will be the latest "image type" attachments on an issue-
simple, and allows for automatic updates of the cover image as issue
progress is made!
This would make Gitea competitive with Trello... wouldn't it be amazing
to say goodbye to Atlassian products? Ha.
First image is the most recent, the SQL will fetch up to 5 latest images
(URL string).
All images supported by browsers plus upcoming formats: *.avif *.bmp
*.gif *.jpg *.jpeg *.jxl *.png *.svg *.webp
The CSS will try to center-align images until it cannot, then it will
left align with overflow hidden. Single images get to be slightly
larger!
Tested so far on: Chrome, Firefox, Android Chrome, Android Firefox.
Current revision with light and dark themes:
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
This PR adds the support for scopes of access tokens, mimicking the
design of GitHub OAuth scopes.
The changes of the core logic are in `models/auth` that `AccessToken`
struct will have a `Scope` field. The normalized (no duplication of
scope), comma-separated scope string will be stored in `access_token`
table in the database.
In `services/auth`, the scope will be stored in context, which will be
used by `reqToken` middleware in API calls. Only OAuth2 tokens will have
granular token scopes, while others like BasicAuth will default to scope
`all`.
A large amount of work happens in `routers/api/v1/api.go` and the
corresponding `tests/integration` tests, that is adding necessary scopes
to each of the API calls as they fit.
- [x] Add `Scope` field to `AccessToken`
- [x] Add access control to all API endpoints
- [x] Update frontend & backend for when creating tokens
- [x] Add a database migration for `scope` column (enable 'all' access
to past tokens)
I'm aiming to complete it before Gitea 1.19 release.
Fixes#4300
This PR adds a task to the cron service to allow garbage collection of
LFS meta objects. As repositories may have a large number of
LFSMetaObjects, an updated column is added to this table and it is used
to perform a generational GC to attempt to reduce the amount of work.
(There may need to be a bit more work here but this is probably enough
for the moment.)
Fix#7045
Signed-off-by: Andrew Thornton <art27@cantab.net>
Previously, there was an `import services/webhooks` inside
`modules/notification/webhook`.
This import was removed (after fighting against many import cycles).
Additionally, `modules/notification/webhook` was moved to
`modules/webhook`,
and a few structs/constants were extracted from `models/webhooks` to
`modules/webhook`.
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Some dbs require that all tables have primary keys, see
- #16802
- #21086
We can add a test to keep it from being broken again.
Edit:
~Added missing primary key for `ForeignReference`~ Dropped the
`ForeignReference` table to satisfy the check, so it closes#21086.
More context can be found in comments.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: zeripath <art27@cantab.net>
Close#14601Fix#3690
Revive of #14601.
Updated to current code, cleanup and added more read/write checks.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Signed-off-by: Andre Bruch <ab@andrebruch.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <git@nroo.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
`hex.EncodeToString` has better performance than `fmt.Sprintf("%x",
[]byte)`, we should use it as much as possible.
I'm not an extreme fan of performance, so I think there are some
exceptions:
- `fmt.Sprintf("%x", func(...)[N]byte())`
- We can't slice the function return value directly, and it's not worth
adding lines.
```diff
func A()[20]byte { ... }
- a := fmt.Sprintf("%x", A())
- a := hex.EncodeToString(A()[:]) // invalid
+ tmp := A()
+ a := hex.EncodeToString(tmp[:])
```
- `fmt.Sprintf("%X", []byte)`
- `strings.ToUpper(hex.EncodeToString(bytes))` has even worse
performance.
Change all license headers to comply with REUSE specification.
Fix#16132
Co-authored-by: flynnnnnnnnnn <flynnnnnnnnnn@github>
Co-authored-by: John Olheiser <john.olheiser@gmail.com>
Giteabot
