A 500 status code was thrown when passing a non-existent target to the
create release API. This snapshot handles this error and instead throws
a 404 status code.
Discovered while working on #31840.
---
`status == "rename"` should have read `status == "renamed"`. The typo
means that file.PreviousFilename would never be populated, which e.g.
breaks usage of the Github Action at
https://github.com/dorny/paths-filter.
This will allow instance admins to view signup pattern patterns for
public instances. It is modelled after discourse, mastodon, and
MediaWiki's approaches.
Note: This has privacy implications, but as the above-stated open-source
projects take this approach, especially MediaWiki, which I have no doubt
looked into this thoroughly, it is likely okay for us, too. However, I
would be appreciative of any feedback on how this could be improved.
---------
Co-authored-by: Giteabot <teabot@gitea.io>
https://github.com/go-fed/httpsig seems to be unmaintained.
Switch to github.com/42wim/httpsig which has removed deprecated crypto
and default sha256 signing for ssh rsa.
No impact for those that use ed25519 ssh certificates.
This is a breaking change for:
- gitea.com/gitea/tea (go-sdk) - I'll be sending a PR there too
- activitypub using deprecated crypto (is this actually used?)
When transferring repositories that have issues linked to a project
board to another organization, the issues remain associated with the
original project board. This causes the columns in the project board to
become bugged, making it difficult to move other issues in or out of the
affected columns. As a solution, I removed the issue relations since the
other organization does not have this project table.
Fix for #31538
Co-authored-by: Jason Song <i@wolfogre.com>
Fix#31738
When pushing a new branch, the old commit is zero. Most git commands
cannot recognize the zero commit id. To get the changed files in the
push, we need to get the first diverge commit of this branch. In most
situations, we could check commits one by one until one commit is
contained by another branch. Then we will think that commit is the
diverge point.
And in a pre-receive hook, this will be more difficult because all
commits haven't been merged and they actually stored in a temporary
place by git. So we need to bring some envs to let git know the commit
exist.
close #27031
If the rpm package does not contain a matching gpg signature, the
installation will fail. See (#27031) , now auto-signing rpm uploads.
This option is turned off by default for compatibility.
If the assign the pull request review to a team, it did not show the
members of the team in the "requested_reviewers" field, so the field was
null. As a solution, I added the team members to the array.
fix#31764
Fix#31137.
Replace #31623#31697.
When migrating LFS objects, if there's any object that failed (like some
objects are losted, which is not really critical), Gitea will stop
migrating LFS immediately but treat the migration as successful.
This PR checks the error according to the [LFS api
doc](https://github.com/git-lfs/git-lfs/blob/main/docs/api/batch.md#successful-responses).
> LFS object error codes should match HTTP status codes where possible:
>
> - 404 - The object does not exist on the server.
> - 409 - The specified hash algorithm disagrees with the server's
acceptable options.
> - 410 - The object was removed by the owner.
> - 422 - Validation error.
If the error is `404`, it's safe to ignore it and continue migration.
Otherwise, stop the migration and mark it as failed to ensure data
integrity of LFS objects.
And maybe we should also ignore others errors (maybe `410`? I'm not sure
what's the difference between "does not exist" and "removed by the
owner".), we can add it later when some users report that they have
failed to migrate LFS because of an error which should be ignored.
There's already `initActionsTasks`; it will avoid additional check for
if Actions enabled to move `registerActionsCleanup` into it.
And we don't really need `OlderThanConfig`.
Fix#31599
A branch divergence is counted based on the default branch. If the
default branch is updated, all divergence caches of the repo need to be
deleted.
This leverages the existing `sync_external_users` cron job to
synchronize the `IsActive` flag on users who use an OAuth2 provider set
to synchronize. This synchronization is done by checking for expired
access tokens, and using the stored refresh token to request a new
access token. If the response back from the OAuth2 provider is the
`invalid_grant` error code, the user is marked as inactive. However, the
user is able to reactivate their account by logging in the web browser
through their OAuth2 flow.
Also changed to support this is that a linked `ExternalLoginUser` is
always created upon a login or signup via OAuth2.
### Notes on updating permissions
Ideally, we would also refresh permissions from the configured OAuth
provider (e.g., admin, restricted and group mappings) to match the
implementation of LDAP. However, the OAuth library used for this `goth`,
doesn't seem to support issuing a session via refresh tokens. The
interface provides a [`RefreshToken`
method](https://github.com/markbates/goth/blob/master/provider.go#L20),
but the returned `oauth.Token` doesn't implement the `goth.Session` we
would need to call `FetchUser`. Due to specific implementations, we
would need to build a compatibility function for every provider, since
they cast to concrete types (e.g.
[Azure](https://github.com/markbates/goth/blob/master/providers/azureadv2/azureadv2.go#L132))
---------
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Make it posible to let mails show e.g.:
`Max Musternam (via gitea.kithara.com) <gitea@kithara.com>`
Docs: https://gitea.com/gitea/docs/pulls/23
---
*Sponsored by Kithara Software GmbH*
Before we had just the plain mail address as recipient. But now we
provide additional Information for the Mail clients.
---
*Sponsored by Kithara Software GmbH*
Fixes#22722
### Problem
Currently, it is not possible to force push to a branch with branch
protection rules in place. There are often times where this is necessary
(CI workflows/administrative tasks etc).
The current workaround is to rename/remove the branch protection,
perform the force push, and then reinstate the protections.
### Solution
Provide an additional section in the branch protection rules to allow
users to specify which users with push access can also force push to the
branch. The default value of the rule will be set to `Disabled`, and the
UI is intuitive and very similar to the `Push` section.
It is worth noting in this implementation that allowing force push does
not override regular push access, and both will need to be enabled for a
user to force push.
This applies to manual force push to a remote, and also in Gitea UI
updating a PR by rebase (which requires force push)
This modifies the `BranchProtection` API structs to add:
- `enable_force_push bool`
- `enable_force_push_whitelist bool`
- `force_push_whitelist_usernames string[]`
- `force_push_whitelist_teams string[]`
- `force_push_whitelist_deploy_keys bool`
### Updated Branch Protection UI:
<img width="943" alt="image"
src="https://github.com/go-gitea/gitea/assets/79623665/7491899c-d816-45d5-be84-8512abd156bf">
### Pull Request `Update branch by Rebase` option enabled with source
branch `test` being a protected branch:
<img width="1038" alt="image"
src="https://github.com/go-gitea/gitea/assets/79623665/57ead13e-9006-459f-b83c-7079e6f4c654">
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Running git update-index for every individual file is slow, so add and
remove everything with a single git command.
When such a big commit lands in the default branch, it could cause PR
creation and patch checking for all open PRs to be slow, or time out
entirely. For example, a commit that removes 1383 files was measured to
take more than 60 seconds and timed out. With this change checking took
about a second.
This is related to #27967, though this will not help with commits that
change many lines in few files.
This PR only does "renaming":
* `Route` should be `Router` (and chi router is also called "router")
* `Params` should be `PathParam` (to distingush it from URL query param, and to match `FormString`)
* Use lower case for private functions to avoid exposing or abusing
1. There are already global "unit consts", no need to use context data, which is fragile
2. Remove the "String()" method from "unit", it would only cause rendering problems in templates
---------
Co-authored-by: silverwind <me@silverwind.io>
Fix#31361, and add tests
And this PR introduces an undocumented & debug-purpose-only config
option: `USE_SUB_URL_PATH`. It does nothing for end users, it only helps
the development of sub-path related problems.
And also fix#31366
Co-authored-by: @ExplodingDragon
Enable [unparam](https://github.com/mvdan/unparam) linter.
Often I could not tell the intention why param is unused, so I put
`//nolint` for those cases like webhook request creation functions never
using `ctx`.
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: delvh <dev.lh@web.de>
This PR introduces the `ReviewedOn` and `ReviewedBy` variables for the
default merge message templates (e.g.,
`.gitea/default_merge_message/MERGE_TEMPLATE.md`).
This allows customizing the default merge messages while retaining these
trailers.
This also moves the associated logic out of `pull.tmpl` into the
relevant Go function.
This is a first contribution towards #11077.
---
For illustration, this allows to recreate the "default default" merge
message with the following template:
```
.gitea/default_merge_message/MERGE_TEMPLATE.md
Merge pull request '${PullRequestTitle}' (${PullRequestReference}) from ${HeadBranch} into ${BaseBranch}
${ReviewedOn}
${ReviewedBy}
```
Uses `gopls check <files>` as a linter. Tested locally and brings up 149
errors currently for me. I don't think I want to fix them in this PR,
but I would like at least to get this analysis running on CI.
List of errors:
```
modules/indexer/code/indexer.go:181:11: impossible condition: nil != nil
routers/private/hook_post_receive.go:120:15: tautological condition: nil == nil
services/auth/source/oauth2/providers.go:185:9: tautological condition: nil == nil
services/convert/issue.go:216:11: tautological condition: non-nil != nil
tests/integration/git_test.go:332:9: impossible condition: nil != nil
services/migrations/migrate.go:179:24-43: unused parameter: ctx
services/repository/transfer.go:288:48-69: unused parameter: doer
tests/integration/api_repo_tags_test.go:75:41-61: unused parameter: session
tests/integration/git_test.go:696:64-74: unused parameter: baseBranch
tests/integration/gpg_git_test.go:265:27-39: unused parameter: t
tests/integration/gpg_git_test.go:284:23-29: unused parameter: tmpDir
tests/integration/gpg_git_test.go:284:31-35: unused parameter: name
tests/integration/gpg_git_test.go:284:37-42: unused parameter: email
```
One new error regarding `fmt.Fscanf` error return in `gitdiff.go` but
I'm not touching that further right now as handling the error would
introduce a behaviour difference.
Kemal Zebari