The version listed in rpm repodata should only contain the rpm version
(1.0.0) and not the combination of version and release (1.0.0-2). We
correct this behaviour in primary.xml.gz, filelists.xml.gz and
others.xml.gz.
Signed-off-by: Peter Verraedt <peter@verraedt.be>
Replace #25892
Close #21942
Close #25464
Major changes:
1. Serve "robots.txt" and ".well-known/security.txt" in the "public"
custom path
* All files in "public/.well-known" can be served, just like
"public/assets"
3. Add a test for ".well-known/security.txt"
4. Simplify the "FileHandlerFunc" logic, now the paths are consistent so
the code can be simpler
5. Add CORS header for ".well-known" endpoints
6. Add logs to tell users they should move some of their legacy custom
public files
```
2023/07/19 13:00:37 cmd/web.go:178:serveInstalled() [E] Found legacy public asset "img" in CustomPath. Please move it to /work/gitea/custom/public/assets/img
2023/07/19 13:00:37 cmd/web.go:182:serveInstalled() [E] Found legacy public asset "robots.txt" in CustomPath. Please move it to /work/gitea/custom/public/robots.txt
```
This PR is not breaking.
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Replace #10912
And there are many new tests to cover the CLI behavior
There were some concerns about the "option order in hook scripts"
(https://github.com/go-gitea/gitea/pull/10912#issuecomment-1137543314),
it's not a problem now. Because the hook script uses `/gitea hook
--config=/app.ini pre-receive` format. The "config" is a global option,
it can appear anywhere.
----
## ⚠️ BREAKING ⚠️
This PR does it best to avoid breaking anything. The major changes are:
* `gitea` itself won't accept web's options: `--install-port` / `--pid`
/ `--port` / `--quiet` / `--verbose` .... They are `web` sub-command's
options.
* Use `./gitea web --pid ....` instead
* `./gitea` can still run the `web` sub-command as shorthand, with
default options
* The sub-command's options must follow the sub-command
* Before: `./gitea --sub-opt subcmd` might equal to `./gitea subcmd
--sub-opt` (well, might not ...)
* After: only `./gitea subcmd --sub-opt` could be used
* The global options like `--config` are not affected
Fix#25776. Close#25826.
In the discussion of #25776, @wolfogre's suggestion was to remove the
commit status of `running` and `warning` to keep it consistent with
github.
references:
-
https://docs.github.com/en/rest/commits/statuses?apiVersion=2022-11-28#about-commit-statuses
## ⚠️ BREAKING ⚠️
So the commit status of Gitea will be consistent with GitHub, only
`pending`, `success`, `error` and `failure`, while `warning` and
`running` are not supported anymore.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
current actions artifacts implementation only support single file
artifact. To support multiple files uploading, it needs:
- save each file to each db record with same run-id, same artifact-name
and proper artifact-path
- need change artifact uploading url without artifact-id, multiple files
creates multiple artifact-ids
- support `path` in download-artifact action. artifact should download
to `{path}/{artifact-path}`.
- in repo action view, it provides zip download link in artifacts list
in summary page, no matter this artifact contains single or multiple
files.
Before: the concept "Content string" is used everywhere. It has some
problems:
1. Sometimes it means "base64 encoded content", sometimes it means "raw
binary content"
2. It doesn't work with large files, eg: uploading a 1G LFS file would
make Gitea process OOM
This PR does the refactoring: use "ContentReader" / "ContentBase64"
instead of "Content"
This PR is not breaking because the key in API JSON is still "content":
`` ContentBase64 string `json:"content"` ``
we refactored `userIDFromToken` for the token parsing part into a new
function `parseToken`. `parseToken` returns the string `token` from
request, and a boolean `ok` representing whether the token exists or
not. So we can distinguish between token non-existence and token
inconsistency in the `verfity` function, thus solving the problem of no
proper error message when the token is inconsistent.
close#24439
related #22119
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: Giteabot <teabot@gitea.io>
Fixes (?) #25538
Fixes https://codeberg.org/forgejo/forgejo/issues/972
Regression #23879#23879 introduced a change which prevents read access to packages if a
user is not a member of an organization.
That PR also contained a change which disallows package access if the
team unit is configured with "no access" for packages. I don't think
this change makes sense (at the moment). It may be relevant for private
orgs. But for public or limited orgs that's useless because an
unauthorized user would have more access rights than the team member.
This PR restores the old behaviour "If a user has read access for an
owner, they can read packages".
---------
Co-authored-by: Giteabot <teabot@gitea.io>
related #16865
This PR adds an accessibility check before mounting container blobs.
---------
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: silverwind <me@silverwind.io>
This PR will display a pull request creation hint on the repository home
page when there are newly created branches with no pull request. Only
the recent 6 hours and 2 updated branches will be displayed.
Inspired by #14003
Replace #14003Resolves#311Resolves#13196Resolves#23743
co-authored by @kolaente
Follow #25229
At present, when the trigger event is `pull_request_target`, the `ref`
and `sha` of `ActionRun` are set according to the base branch of the
pull request. This makes it impossible for us to find the head branch of
the `ActionRun` directly. In this PR, the `ref` and `sha` will always be
set to the head branch and they will be changed to the base branch when
generating the task context.
Fixes#24723
Direct serving of content aka HTTP redirect is not mentioned in any of
the package registry specs but lots of official registries do that so it
should be supported by the usual clients.
Fix#25558
Extract from #22743
This PR added a repository's check when creating/deleting branches via
API. Mirror repository and archive repository cannot do that.
This adds an API for uploading and Deleting Avatars for of Users, Repos
and Organisations. I'm not sure, if this should also be added to the
Admin API.
Resolves#25344
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
Related #14180
Related #25233
Related #22639Close#19786
Related #12763
This PR will change all the branches retrieve method from reading git
data to read database to reduce git read operations.
- [x] Sync git branches information into database when push git data
- [x] Create a new table `Branch`, merge some columns of `DeletedBranch`
into `Branch` table and drop the table `DeletedBranch`.
- [x] Read `Branch` table when visit `code` -> `branch` page
- [x] Read `Branch` table when list branch names in `code` page dropdown
- [x] Read `Branch` table when list git ref compare page
- [x] Provide a button in admin page to manually sync all branches.
- [x] Sync branches if repository is not empty but database branches are
empty when visiting pages with branches list
- [x] Use `commit_time desc` as the default FindBranch order by to keep
consistent as before and deleted branches will be always at the end.
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Fix#25088
This PR adds the support for
[`pull_request_target`](https://docs.github.com/en/actions/using-workflows/events-that-trigger-workflows#pull_request_target)
workflow trigger. `pull_request_target` is similar to `pull_request`,
but the workflow triggered by the `pull_request_target` event runs in
the context of the base branch of the pull request rather than the head
branch. Since the workflow from the base is considered trusted, it can
access the secrets and doesn't need approvals to run.
### Summary
Extend the template variable substitution to replace file paths. This
can be helpful for setting up log files & directories that should match
the repository name.
### PR Changes
- Move files matching glob pattern when setting up repos from template
- For security, added ~escaping~ sanitization for cross-platform support
and to prevent directory traversal (thanks @silverwind for the
reference)
- Added unit testing for escaping function
- Fixed the integration tests for repo template generation by passing
the repo_template_id
- Updated the integration testfiles to add some variable substitution &
assert the outputs
I had to fix the existing repo template integration test and extend it
to add a check for variable substitutions.
Example:
Fix#21072
Username Attribute is not a required item when creating an
authentication source. If Username Attribute is empty, the username
value of LDAP user cannot be read, so all users from LDAP will be marked
as inactive by mistake when synchronizing external users.
This PR improves the sync logic, if username is empty, the email address
will be used to find user.
1. The "web" package shouldn't depends on "modules/context" package,
instead, let each "web context" register themselves to the "web"
package.
2. The old Init/Free doesn't make sense, so simplify it
* The ctx in "Init(ctx)" is never used, and shouldn't be used that way
* The "Free" is never called and shouldn't be called because the SSPI
instance is shared
---------
Co-authored-by: Giteabot <teabot@gitea.io>
Clarify the "link-action" behavior:
> // A "link-action" can post AJAX request to its "data-url"
> // Then the browser is redirect to: the "redirect" in response, or
"data-redirect" attribute, or current URL by reloading.
And enhance the "link-action" to support showing a modal dialog for
confirm. A similar general approach could also help PRs like
https://github.com/go-gitea/gitea/pull/22344#discussion_r1062883436
> // If the "link-action" has "data-modal-confirm(-html)" attribute, a
confirm modal dialog will be shown before taking action.
And a lot of duplicate code can be removed now. A good framework design
can help to avoid code copying&pasting.
---------
Co-authored-by: silverwind <me@silverwind.io>
## Changes
- Adds the following high level access scopes, each with `read` and
`write` levels:
- `activitypub`
- `admin` (hidden if user is not a site admin)
- `misc`
- `notification`
- `organization`
- `package`
- `issue`
- `repository`
- `user`
- Adds new middleware function `tokenRequiresScopes()` in addition to
`reqToken()`
- `tokenRequiresScopes()` is used for each high-level api section
- _if_ a scoped token is present, checks that the required scope is
included based on the section and HTTP method
- `reqToken()` is used for individual routes
- checks that required authentication is present (but does not check
scope levels as this will already have been handled by
`tokenRequiresScopes()`
- Adds migration to convert old scoped access tokens to the new set of
scopes
- Updates the user interface for scope selection
### User interface example
<img width="903" alt="Screen Shot 2023-05-31 at 1 56 55 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/654766ec-2143-4f59-9037-3b51600e32f3">
<img width="917" alt="Screen Shot 2023-05-31 at 1 56 43 PM"
src="https://github.com/go-gitea/gitea/assets/23248839/1ad64081-012c-4a73-b393-66b30352654c">
## tokenRequiresScopes Design Decision
- `tokenRequiresScopes()` was added to more reliably cover api routes.
For an incoming request, this function uses the given scope category
(say `AccessTokenScopeCategoryOrganization`) and the HTTP method (say
`DELETE`) and verifies that any scoped tokens in use include
`delete:organization`.
- `reqToken()` is used to enforce auth for individual routes that
require it. If a scoped token is not present for a request,
`tokenRequiresScopes()` will not return an error
## TODO
- [x] Alphabetize scope categories
- [x] Change 'public repos only' to a radio button (private vs public).
Also expand this to organizations
- [X] Disable token creation if no scopes selected. Alternatively, show
warning
- [x] `reqToken()` is missing from many `POST/DELETE` routes in the api.
`tokenRequiresScopes()` only checks that a given token has the correct
scope, `reqToken()` must be used to check that a token (or some other
auth) is present.
- _This should be addressed in this PR_
- [x] The migration should be reviewed very carefully in order to
minimize access changes to existing user tokens.
- _This should be addressed in this PR_
- [x] Link to api to swagger documentation, clarify what
read/write/delete levels correspond to
- [x] Review cases where more than one scope is needed as this directly
deviates from the api definition.
- _This should be addressed in this PR_
- For example:
```go
m.Group("/users/{username}/orgs", func() {
m.Get("", reqToken(), org.ListUserOrgs)
m.Get("/{org}/permissions", reqToken(), org.GetUserOrgsPermissions)
}, tokenRequiresScopes(auth_model.AccessTokenScopeCategoryUser,
auth_model.AccessTokenScopeCategoryOrganization),
context_service.UserAssignmentAPI())
```
## Future improvements
- [ ] Add required scopes to swagger documentation
- [ ] Redesign `reqToken()` to be opt-out rather than opt-in
- [ ] Subdivide scopes like `repository`
- [ ] Once a token is created, if it has no scopes, we should display
text instead of an empty bullet point
- [ ] If the 'public repos only' option is selected, should read
categories be selected by default
Closes#24501Closes#24799
Co-authored-by: Jonathan Tran <jon@allspice.io>
Co-authored-by: Kyle D <kdumontnu@gmail.com>
Co-authored-by: silverwind <me@silverwind.io>
The PKCE flow according to [RFC
7636](https://datatracker.ietf.org/doc/html/rfc7636) allows for secure
authorization without the requirement to provide a client secret for the
OAuth app.
It is implemented in Gitea since #5378 (v1.8.0), however without being
able to omit client secret.
Since #21316 Gitea supports setting client type at OAuth app
registration.
As public clients are already forced to use PKCE since #21316, in this
PR the client secret check is being skipped if a public client is
detected. As Gitea seems to implement PKCE authorization correctly
according to the spec, this would allow for PKCE flow without providing
a client secret.
Also add some docs for it, please check language as I'm not a native
English speaker.
Closes#17107Closes#25047
The admin config page has been broken for many many times, a little
refactoring would make this page panic.
So, add a test for it, and add another test to cover the 500 error page.
Co-authored-by: Giteabot <teabot@gitea.io>
This PR creates an API endpoint for creating/updating/deleting multiple
files in one API call similar to the solution provided by
[GitLab](https://docs.gitlab.com/ee/api/commits.html#create-a-commit-with-multiple-files-and-actions).
To archive this, the CreateOrUpdateRepoFile and DeleteRepoFIle functions
in files service are unified into one function supporting multiple files
and actions.
Resolves#14619
This adds the ability to pin important Issues and Pull Requests. You can
also move pinned Issues around to change their Position. Resolves#2175.
## Screenshots
The Design was mostly copied from the Projects Board.
## Implementation
This uses a new `pin_order` Column in the `issue` table. If the value is
set to 0, the Issue is not pinned. If it's set to a bigger value, the
value is the Position. 1 means it's the first pinned Issue, 2 means it's
the second one etc. This is dived into Issues and Pull requests for each
Repo.
## TODO
- [x] You can currently pin as many Issues as you want. Maybe we should
add a Limit, which is configurable. GitHub uses 3, but I prefer 6, as
this is better for bigger Projects, but I'm open for suggestions.
- [x] Pin and Unpin events need to be added to the Issue history.
- [x] Tests
- [x] Migration
**The feature itself is currently fully working, so tester who may find
weird edge cases are very welcome!**
---------
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: Giteabot <teabot@gitea.io>
## ⚠️ Breaking
The `log.<mode>.<logger>` style config has been dropped. If you used it,
please check the new config manual & app.example.ini to make your
instance output logs as expected.
Although many legacy options still work, it's encouraged to upgrade to
the new options.
The SMTP logger is deleted because SMTP is not suitable to collect logs.
If you have manually configured Gitea log options, please confirm the
logger system works as expected after upgrading.
## Description
Close#12082 and maybe more log-related issues, resolve some related
FIXMEs in old code (which seems unfixable before)
Just like rewriting queue #24505 : make code maintainable, clear legacy
bugs, and add the ability to support more writers (eg: JSON, structured
log)
There is a new document (with examples): `logging-config.en-us.md`
This PR is safer than the queue rewriting, because it's just for
logging, it won't break other logic.
## The old problems
The logging system is quite old and difficult to maintain:
* Unclear concepts: Logger, NamedLogger, MultiChannelledLogger,
SubLogger, EventLogger, WriterLogger etc
* Some code is diffuclt to konw whether it is right:
`log.DelNamedLogger("console")` vs `log.DelNamedLogger(log.DEFAULT)` vs
`log.DelLogger("console")`
* The old system heavily depends on ini config system, it's difficult to
create new logger for different purpose, and it's very fragile.
* The "color" trick is difficult to use and read, many colors are
unnecessary, and in the future structured log could help
* It's difficult to add other log formats, eg: JSON format
* The log outputer doesn't have full control of its goroutine, it's
difficult to make outputer have advanced behaviors
* The logs could be lost in some cases: eg: no Fatal error when using
CLI.
* Config options are passed by JSON, which is quite fragile.
* INI package makes the KEY in `[log]` section visible in `[log.sub1]`
and `[log.sub1.subA]`, this behavior is quite fragile and would cause
more unclear problems, and there is no strong requirement to support
`log.<mode>.<logger>` syntax.
## The new design
See `logger.go` for documents.
## Screenshot
<details>
</details>
## TODO
* [x] add some new tests
* [x] fix some tests
* [x] test some sub-commands (manually ....)
---------
Co-authored-by: Jason Song <i@wolfogre.com>
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: Giteabot <teabot@gitea.io>
This PR is a refactor at the beginning. And now it did 4 things.
- [x] Move renaming organizaiton and user logics into services layer and
merged as one function
- [x] Support rename a user capitalization only. For example, rename the
user from `Lunny` to `lunny`. We just need to change one table `user`
and others should not be touched.
- [x] Before this PR, some renaming were missed like `agit`
- [x] Fix bug the API reutrned from `http.StatusNoContent` to `http.StatusOK`
JakobDev
