* invent ctx.QueryOptionalBool
* [API] ListReleases add draft and pre-release filter
* Add X-Total-Count header
* Add a release to fixtures
* Add TEST for API ListReleases
* Ensure validation occurs on clone addresses too
Fix#14984
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix lint
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix test
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix api tests
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* make repo as "pending transfer" if on transfer start doer has no right to create repo in new destination
* if new pending transfer ocured, create UI & Mail notifications
* add black list and white list support for migrating repositories
* fix fmt
* fix lint
* fix vendor
* fix modules.txt
* clean diff
* specify log message
* use blocklist/allowlist
* allways use lowercase to match url
* Apply allow/block
* Settings: use existing "migrations" section
* convert domains lower case
* dont store unused value
* Block private addresses for migration by default
* fix lint
* use proposed-upstream func to detect private IP addr
* a nit
* add own error for blocked migration, add tests, imprufe api
* fix test
* fix-if-localhost-is-ipv4
* rename error & error message
* rename setting options
* Apply suggestions from code review
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Make archival asynchronous
The prime benefit being sought here is for large archives to not
clog up the rendering process and cause unsightly proxy timeouts.
As a secondary benefit, archive-in-progress is moved out of the
way into a /tmp file so that new archival requests for the same
commit will not get fulfilled based on an archive that isn't yet
finished.
This asynchronous system is fairly primitive; request comes in, we'll
spawn off a new goroutine to handle it, then we'll mark it as done.
Status requests will see if the file exists in the final location,
and report the archival as done when it exists.
Fixes#11265
* Archive links: drop initial delay to three-quarters of a second
Some, or perhaps even most, archives will not take all that long to archive.
The archive process starts as soon as the download button is initially
clicked, so in theory they could be done quite quickly. Drop the initial
delay down to three-quarters of a second to make it more responsive in the
common case of the archive being quickly created.
* archiver: restructure a little bit to facilitate testing
This introduces two sync.Cond pointers to the archiver package. If they're
non-nil when we go to process a request, we'll wait until signalled (at all)
to proceed. The tests will then create the sync.Cond so that it can signal
at-will and sanity-check the state of the queue at different phases.
The author believes that nil-checking these two sync.Cond pointers on every
archive processing will introduce minimal overhead with no impact on
maintainability.
* gofmt nit: no space around binary + operator
* services: archiver: appease golangci-lint, lock queueMutex
Locking/unlocking the queueMutex is allowed, but not required, for
Cond.Signal() and Cond.Broadcast(). The magic at play here is just a little
too much for golangci-lint, as we take the address of queueMutex and this is
mostly used in archiver.go; the variable still gets flagged as unused.
* archiver: tests: fix several timing nits
Once we've signaled a cond var, it may take some small amount of time for
the goroutines released to hit the spot we're wanting them to be at. Give
them an appropriate amount of time.
* archiver: tests: no underscore in var name, ungh
* archiver: tests: Test* is run in a separate context than TestMain
We must setup the mutex/cond variables at the beginning of any test that's
going to use it, or else these will be nil when the test is actually ran.
* archiver: tests: hopefully final tweak
Things got shuffled around such that we carefully build up and release
requests from the queue, so we can validate the state of the queue at each
step. Fix some assertions that no longer hold true as fallout.
* repo: Download: restore some semblance of previous behavior
When archival was made async, the GET endpoint was only useful if a previous
POST had initiated the download. This commit restores the previous behavior,
to an extent; we'll now submit the archive request there and return a
"202 Accepted" to indicate that it's processing if we didn't manage to
complete the request within ~2 seconds of submission.
This lets a client directly GET the archive, and gives them some indication
that they may attempt to GET it again at a later time.
* archiver: tests: simplify a bit further
We don't need to risk failure and use time.ParseDuration to get 2 *
time.Second.
else if isn't really necessary if the conditions are simple enough and lead
to the same result.
* archiver: tests: resolve potential source of flakiness
Increase all timeouts to 10 seconds; these aren't hard-coded sleeps, so
there's no guarantee we'll actually take that long. If we need longer to
not have a false-positive, then so be it.
While here, various assert.{Not,}Equal arguments are flipped around so that
the wording in error output reflects reality, where the expected argument is
second and actual third.
* archiver: setup infrastructure for notifying consumers of completion
This API will *not* allow consumers to subscribe to specific requests being
completed, just *any* request being completed. The caller is responsible for
determining if their request is satisfied and waiting again if needed.
* repo: archive: make GET endpoint synchronous again
If the request isn't complete, this endpoint will now submit the request and
wait for completion using the new API. This may still be susceptible to
timeouts for larger repos, but other endpoints now exist that the web
interface will use to negotiate its way through larger archive processes.
* archiver: tests: amend test to include WaitForCompletion()
This is a trivial one, so go ahead and include it.
* archiver: tests: fix test by calling NewContext()
The mutex is otherwise uninitialized, so we need to ensure that we're
actually initializing it if we plan to test it.
* archiver: tests: integrate new WaitForCompletion a little better
We can use this to wait for archives to come in, rather than spinning and
hoping with a timeout.
* archiver: tests: combine numQueued declaration with next-instruction assignment
* routers: repo: reap unused archiving flag from DownloadStatus()
This had some planned usage before, indicating whether this request
initiated the archival process or not. After several rounds of refactoring,
this use was deemed not necessary for much of anything and got boiled down
to !complete in all cases.
* services: archiver: restructure to use a channel
We now offer two forms of waiting for a request:
- WaitForCompletion: wait for completion with no timeout
- TimedWaitForCompletion: wait for completion with timeout
In both cases, we wait for the given request's cchan to close; in the latter
case, we do so with the caller-provided timeout. This completely removes the
need for busy-wait loops in Download/InitiateDownload, as it's fairly clean
to wait on a channel with timeout.
* services: archiver: use defer to unlock now that we can
This previously carried the lock into the goroutine, but an intermediate
step just added the request to archiveInProgress outside of the new
goroutine and removed the need for the goroutine to start out with it.
* Revert "archiver: tests: combine numQueued declaration with next-instruction assignment"
This reverts commit bcc5214023.
Revert "archiver: tests: integrate new WaitForCompletion a little better"
This reverts commit 9fc8bedb56.
Revert "archiver: tests: fix test by calling NewContext()"
This reverts commit 709c35685e.
Revert "archiver: tests: amend test to include WaitForCompletion()"
This reverts commit 75261f56bc.
* archiver: tests: first attempt at WaitForCompletion() tests
* archiver: tests: slight improvement, less busy-loop
Just wait for the requests to complete in order, instead of busy-waiting
with a timeout. This is slightly less fragile.
While here, reverse the arguments of a nearby assert.Equal() so that
expected/actual are correct in any test output.
* archiver: address lint nits
* services: archiver: only close the channel once
* services: archiver: use a struct{} for the wait channel
This makes it obvious that the channel is only being used as a signal,
rather than anything useful being piped through it.
* archiver: tests: fix expectations
Move the close of the channel into doArchive() itself; notably, before these
goroutines move on to waiting on the Release cond.
The tests are adjusted to reflect that we can't WaitForCompletion() after
they've already completed, as WaitForCompletion() doesn't indicate that
they've been released from the queue yet.
* archiver: tests: set cchan to nil for comparison
* archiver: move ctx.Error's back into the route handlers
We shouldn't be setting this in a service, we should just be validating the
request that we were handed.
* services: archiver: use regex to match a hash
This makes sure we don't try and use refName as a hash when it's clearly not
one, e.g. heads/pull/foo.
* routers: repo: remove the weird /archive/status endpoint
We don't need to do this anymore, we can just continue POSTing to the
archive/* endpoint until we're told the download's complete. This avoids a
potential naming conflict, where a ref could start with "status/"
* archiver: tests: bump reasonable timeout to 15s
* archiver: tests: actually release timedReq
* archiver: tests: run through inFlight instead of manually checking
While we're here, add a test for manually re-processing an archive that's
already been complete. Re-open the channel and mark it incomplete, so that
doArchive can just mark it complete again.
* initArchiveLinks: prevent default behavior from clicking
* archiver: alias gitea's context, golang context import pending
* archiver: simplify logic, just reconstruct slices
While the previous logic was perhaps slightly more efficient, the
new variant's readability is much improved.
* archiver: don't block shutdown on waiting for archive
The technique established launches a goroutine to do the wait,
which will close a wait channel upon termination. For the timeout
case, we also send back a value indicating whether the timeout was
hit or not.
The timeouts are expected to be relatively small, but still a multi-
second delay to shutdown due to this could be unfortunate.
* archiver: simplify shutdown logic
We can just grab the shutdown channel from the graceful manager instead of
constructing a channel to halt the caller and/or pass a result back.
* Style issues
* Fix mis-merge
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* use different structs for MigrateRepoOptions on UI and API
* Fix TokenAuth and rename UID to an understandable Name
* fix swagger doc
* simplify & mk redable
* R E F A C T O R:
migration has now internal 3 structs to store its options:
* the Options for WebUI: modules/auth/repo_form.go
* the Options for API: modules/structs/repo.go
* the option struct with after validation for internal prossessing: modules/migrations/base/options.go
* Copyright Header
* Deprecate UID - add RepoOwner
* adopt repo.go -> migrate.go
* add comment about each struct purpose
* lint
Replace all calls to os.Remove/os.RemoveAll by retrying util.Remove/util.RemoveAll and remove circular dependencies from util.
Fix#12339
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: silverwind <me@silverwind.io>
* Honor DEFAULT_PAGING_NUM for API
* set pagination to 10 for tests
* lint
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
* Add fixture gen tool and fix "access" test
* Close file before exiting
* Add missing repo_unit for repo id: 5
* Fix count on TestAPIOrgRepos
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
* Add team permission setting to allow creating repo in organization.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add test case for creating repo when have team creation access.
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* build error: should omit comparison to bool constant
Signed-off-by: David Svantesson <davidsvantesson@gmail.com>
* Add comment on exported functions
* Fix fixture consistency, fix existing unit tests
* Fix boolean comparison in xorm query.
* addCollaborator and changeCollaborationAccessMode separate steps
More clear to use different if-cases.
* Create and commit xorm session
* fix
* Add information of create repo permission in team sidebar
* Add migration step
* Clarify that repository creator will be administrator.
* Fix some things after merge
* Fix language text that use html
* migrations file
* Create repository permission -> Create repositories
* fix merge
* fix review comments
* Restrict repository indexing by file extension
* Use REPO_EXTENSIONS_LIST_INCLUDE instead of REPO_EXTENSIONS_LIST_EXCLUDE and have a more flexible extension pattern
* Corrected to pass lint gosimple
* Add wildcard support to REPO_INDEXER_EXTENSIONS
* This reverts commit 72a650c8e4.
* Add wildcard support to REPO_INDEXER_EXTENSIONS (no make vendor)
* Simplify isIndexable() for better clarity
* Add gobwas/glob to vendors
* manually set appengine new release
* Implement better REPO_INDEXER_INCLUDE and REPO_INDEXER_EXCLUDE
* Add unit and integration tests
* Update app.ini.sample and reword config-cheat-sheet
* Add doc page and correct app.ini.sample
* Some polish on the doc
* Simplify code as suggested by @lafriks
* Add API for manipulating Git hooks
Signed-off-by: Segev Finer <segev@codeocean.com>
* Replace code.gitea.io/sdk with PR branch temporarily for CI
* Switch back to code.gitea.io/sdk@master
* Return 403 instead of 404 on no permission to edit hooks in API
* Add tests for Git hooks API
* Update models/repo_list_test.go
Co-Authored-By: segevfiner <segev208@gmail.com>
* Update models/repo_list_test.go
Co-Authored-By: segevfiner <segev208@gmail.com>
* empty line
* Support searching commits with prefix syntax
For now, support auther: committer:
When more than one prefix is supplied is presented, the result is the union.
When different prefixes are supplied, the result is the intersection.
For example,
"author:alice author:bob"
=> the result is all commits authored by Alice OR Bob
"hello committer:alice"
=> the result is all commits committed by Alice AND has the keyword
'hello' in the message.
Note that there should NOT have any space after the colon(:) of the prefix.
For example,
"author:bill" => correct
"author: bill" => wrong
* Remove unneeded logging
* Add missing files of test repository
* Add missing repo_unit entries to test fixtures
* Update test cases
* Add tooltip for commits search button
* Update tooltip text
I have no idea about how to format it with line breaks.
* Make the usage example more real
* Add a test case
* Add new options struct for SearchCommits
* Prefer len(s) > 0 over s != ""
* Add NewSearchCommitsOptions
* Repositories can only migrated to own user or organizations
* Add check for organization that user does not belong to
* Allow admin to migrate repositories for other users
* Add repo type option to /api/repo/search
* Add tests and fix result of collaborative filter in specific condition
* Fix/optimize search & tests
* Improve integration tests
* Fix lint errors
* Fix unit tests
* Change and improve internal implementation of repo search
* Use NonexistentID
* Make search api more general
* Change mirror and fork search behaviour
* Fix tests & typo in comment
* Add more repo search tests
* Fix repo search tests
* Always test returned repos length
* Add test with lower pagesize limit (test more pages)
* Add and fix /api/repo/search integration tests
* Simplify unit tests code
* Simplify and unify integration tests code
* Improve test coverage
* Temporary fix tests due to bugs in current repo search implementation
* Revert removing not nil Searcher
* Add more checks to tests
* Simplify privacy checks in /api/repo tests
* Temporary remove privacy check from repo search tests
6543