The call to html.EscapeString in routers/web/repo/blame.go:renderBlame is extraneous
as the commit message is now rendered by the template. The template will correctly
escape strings - therefore we are currently double escaping.
This PR fixes this.
Fix#17492
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fixes#16558 CSV delimiter determiner
* Fixes#16558 - properly determine CSV delmiiter
* Moves quoteString to a new function
* Adds big test with lots of commas for tab delimited csv
* Adds comments
* Shortens the text of the test
* Removes single quotes from regexp as only double quotes need to be searched
* Fixes spelling
* Fixes check of length as it probalby will only be 1e4, not greater
* Makes sample size a const, properly removes truncated line
* Makes sample size a const, properly removes truncated line
* Fixes comment
* Fixes comment
* tests for FormatError() function
* Adds logic to find the limiter before or after a quoted value
* Simplifies regex
* Error tests
* Error tests
* Update modules/csv/csv.go
Co-authored-by: delvh <dev.lh@web.de>
* Update modules/csv/csv.go
Co-authored-by: delvh <dev.lh@web.de>
* Adds comments
* Update modules/csv/csv.go
Co-authored-by: delvh <dev.lh@web.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: delvh <dev.lh@web.de>
CountOrphanedObjects needs to quote the table it is joining with as this table may
be `user`.
Fix#17485
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Run Migrate in Install rather than just SyncTables
The underlying problem in #17328 appears to be that users are re-running the install
page during upgrades. The function that tests and creates the db did not intend for
this and thus instead the migration scripts being run - a simple sync tables occurs.
This then causes a weird partially migrated DB which causes, in this release cycle,
the duplicate column in task table error. It is likely the cause of some weird
partial migration errors in other cycles too.
This PR simply ensures that the migration scripts are also run at this point too.
Fix#17328
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Move GPG form before list and add cancel button
* Move SSH form before list and add cancel button
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There was a recent spelling mistake added to the locale file where stared was used
instead of starred.
This PR changes this to starred.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There is a small bug in the way that repo access is checked in
repoAssignment: Accessibility is checked by checking if the user has a
marked access to the repository instead of checking if the user has any
team granted access.
This PR changes this permissions check to use HasAccess() which does the
correct test. There is also a fix in the release api ListReleases where
it should return draft releases if the user is a member of a team with
write access to the releases.
The PR also adds a testcase.
Signed-off-by: Andrew Thornton <art27@cantab.net>
modules/private/serv.go has two major functions that are missing testcases to ensure
that Deploy and normal SSH keys work correctly.
This PR adds some basic integration tests for these.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* fix: show client-side error if wiki page is empty
Implement a JS, client-side validation workaround for a bug in the upstream
editor library SimpleMDE which breaks HTML5 client-side validation when
a wiki page is submitted.
This allows native, client-side errors to appear if
the text editor contents are empty.
See upstream bugfix report: https://github.com/sparksuite/simplemde-markdown-editor/issues/324
Signed-off-by: David Jimenez <dvejmz@sgfault.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
* Fixes#16559 - Do not trim leading spaces for tab delimited
* Adds back semicolon delimited test
* Fixes linting
* Adds nolint directive to test because uses strings starting with spaces
Co-authored-by: zeripath <art27@cantab.net>
Unfortunately there was a regression in #17373 which missed that the user is not
for deploy keys. This leads to a panic when pushing with deploy keys.
Fix#17412
Signed-off-by: Andrew Thornton <art27@cantab.net>
Run chmod on the executables and the entrypoint when copying them to the
docker in dockerfile.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <noerw@users.noreply.github.com>
Co-authored-by: delvh <dev.lh@web.de>
closed#17378
Both errors from #17378 were caused by #15175.
Problem 1 (error with added file):
`ToUTF8WithFallbackReader` creates a `MultiReader` from a `byte[2048]` and the remaining reader. `CreateReaderAndGuessDelimiter` tries to read 10000 bytes from this reader but only gets 2048 because that's the first reader in the `MultiReader`. Then the `if size < 1e4` thinks the input is at EOF and just returns that.
Problem 2 (error with changed file):
The blob reader gets defer closed. That was fine because the old version reads the whole file into memory. Now with the streaming version the close needs to defer after the method.
* Improve: make diff result better, make the HTML element fit the full height in the content history diff dialog
* Bug fix: when edit the main issue, the poster is wrongly set to the issue poster
* Improve: make diff result better, make the HTML element fit the full height in the content history diff dialog
* Bug fix: when edit the main issue, the poster is wrongly set to the issue poster
* Add groups scope/claim to OICD/OAuth2
Add support for groups claim as part of the OIDC/OAuth2 flow.
Groups is a list of "org" and "org:team" strings to allow clients to
authorize based on the groups a user is part of.
Signed-off-by: Nico Schieder <code@nico-schieder.de>
Co-authored-by: zeripath <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
The API convert.toUser function makes the incorrect assumption that full names could
be rendered as is without being escaped. It therefore runs the names through
markup.Sanitize which leads to a double escape of user full names. This
pr stops this.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
We have the `AppState` module now, it can store app related data easily. We do not need to create separate tables for each feature.
So the update checker can use `AppState` instead of a one-row dedicate table.
And the code of update checker is moved from `models` to `modules`.
* Remove swipe-bar z-index
Fixes position of swipe-bar so it does not overlay other UI components when scrolling.
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
* Unique names for image tabs in pull request
Define unique names for image tabs in pull requests, in order to toggle tabs correctly when multiple are displayed on one page.
Signed-off-by: Mario Lubenka <mario.lubenka@googlemail.com>
Co-authored-by: Lauris BH <lauris@nix.lv>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Gitea writes its own AppPath into git hook scripts. If Gitea's AppPath changes, then the git push will fail.
This PR:
* Introduce an AppState module, it can persist app states into database
* During GlobalInit, Gitea will check if the current AppPath is the same as last one. If they don't match, Gitea will sync git hooks.
* Refactor some code to make them more clear.
* Also, "Detect if gitea binary's name changed" #11341 is related, we call models.RewriteAllPublicKeys to update ssh authorized_keys file
zeripath
