By some CI fine tunes (`run tests`), SQLite & MSSQL could complete
in about 12~13 minutes (before > 14), MySQL could complete in 18 minutes
(before: about 23 or even > 30)
Major changes:
1. use tmpfs for MySQL storage
1. run `make test-mysql` instead of `make integration-test-coverage`
because the code coverage is not really used at the moment.
1. refactor testlogger to make it more reliable and be able to report
stuck stacktrace
1. do not requeue failed items when a queue is being flushed (failed
items would keep failing and make flush uncompleted)
1. reduce the file sizes for testing
1. use math ChaCha20 random data instead of crypot/rand (for testing
purpose only)
1. no need to `DeleteRepository` in `TestLinguist`
1. other related refactoring to make code easier to maintain
In profiling integration tests, I found a couple places where per-test
overhead could be reduced:
* Avoiding disk IO by synchronizing instead of deleting & copying test
Git repository data. This saves ~100ms per test on my machine
* When flushing queues in `PrintCurrentTest`, invoke `FlushWithContext`
in a parallel.
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
There were too many patches to the Render system, it's really difficult
to make further improvements.
This PR clears the legacy problems and fix TODOs.
1. Rename `RenderContext.Type` to `RenderContext.MarkupType` to clarify
its usage.
2. Use `ContentMode` to replace `meta["mode"]` and `IsWiki`, to clarify
the rendering behaviors.
3. Use "wiki" mode instead of "mode=gfm + wiki=true"
4. Merge `renderByType` and `renderByFile`
5. Add more comments
----
The problem of "mode=document": in many cases it is not set, so many
non-comment places use comment's hard line break incorrectly
1. move "internal-lfs" route mock to "common-lfs"
2. fine tune tests
3. fix "realm" strings, according to RFC:
https://datatracker.ietf.org/doc/html/rfc2617:
* realm = "realm" "=" realm-value
* realm-value = quoted-string
4. clarify some names of the middlewares, rename `ignXxx` to `optXxx` to
match `reqXxx`, and rename ambiguous `requireSignIn` to `reqGitSignIn`
Gitea instance keeps reporting a lot of errors like "LFS SSH transfer connection denied, pure SSH protocol is disabled". When starting debugging the problem, there are more problems found. Try to address most of them:
* avoid unnecessary server side error logs (change `fail()` to not log them)
* figure out the broken tests/user2/lfs.git (added comments)
* avoid `migratePushMirrors` failure when a repository doesn't exist (ignore them)
* avoid "Authorization" (internal&lfs) header conflicts, remove the tricky "swapAuth" and use "X-Gitea-Internal-Auth"
* make internal token comparing constant time (it wasn't a serous problem because in a real world it's nearly impossible to timing-attack the token, but good to fix and backport)
* avoid duplicate routers (introduce AddOwnerRepoGitLFSRoutes)
* avoid "internal (private)" routes using session/web context (they should use private context)
* fix incorrect "path" usages (use "filepath")
* fix incorrect mocked route point handling (need to check func nil correctly)
* split some tests from "git general tests" to "git misc tests" (to keep "git_general_test.go" simple)
Still no correct result for Git LFS SSH tests. So the code is kept there
(`tests/integration/git_lfs_ssh_test.go`) and a FIXME explains the details.
From testing, I found that issue posters and users with repository write
access are able to edit attachment names in a way that circumvents the
instance-level file extension restrictions using the edit attachment
APIs. This snapshot adds checks for these endpoints.
Use zero instead of 9999-12-31 for deadline
Fix#32291
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
1. clarify the "filepath" could(should) contain "{ref}"
2. remove unclear RepoRefLegacy and RepoRefAny, use RepoRefUnknown to guess
3. by the way, avoid using AppURL
Closes https://github.com/go-gitea/gitea/issues/30296
- Adds a DB fixture for actions artifacts
- Adds artifacts test files
- Clears artifacts test files between each run
- Note: I initially initialized the artifacts only for artifacts tests,
but because the files are small it only takes ~8ms, so I changed it to
always run in test setup for simplicity
- Fix some otherwise flaky tests by making them not depend on previous
tests
This introduces a new flag `BlockAdminMergeOverride` on the branch
protection rules that prevents admins/repo owners from bypassing branch
protection rules and merging without approvals or failing status checks.
Fixes#17131
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: Giteabot <teabot@gitea.io>
This is a large and complex PR, so let me explain in detail its changes.
First, I had to create new index mappings for Bleve and ElasticSerach as
the current ones do not support search by filename. This requires Gitea
to recreate the code search indexes (I do not know if this is a breaking
change, but I feel it deserves a heads-up).
I've used [this
approach](https://www.elastic.co/guide/en/elasticsearch/reference/7.17/analysis-pathhierarchy-tokenizer.html)
to model the filename index. It allows us to efficiently search for both
the full path and the name of a file. Bleve, however, does not support
this out-of-box, so I had to code a brand new [token
filter](https://blevesearch.com/docs/Token-Filters/) to generate the
search terms.
I also did an overhaul in the `indexer_test.go` file. It now asserts the
order of the expected results (this is important since matches based on
the name of a file are more relevant than those based on its content).
I've added new test scenarios that deal with searching by filename. They
use a new repo included in the Gitea fixture.
The screenshot below depicts how Gitea shows the search results. It
shows results based on content in the same way as the current version
does. In matches based on the filename, the first seven lines of the
file contents are shown (BTW, this is how GitHub does it).
Resolves#32096
---------
Signed-off-by: Bruno Sofiato <bruno.sofiato@gmail.com>
while testing i found out that testing locally as documented in the
changed README.md for pgsql isn't working because of the minio
dependency. reworked this to by default be still docker, but allow for
for local with only minio in docker and testing on bare metal.
also depending on this: fixed docs for running pgsql test
Closes: #32168 (by changing documentation for pgsql tests)
Closes: #32169 (by changing documentation, Makefile & pgsql.ini.tmpl:
adding {{TEST_MINIO_ENDPOINT}})
sry for the combined pr, but when testing I ran into this issue and
first thought they were related and now finally address the same
problem: not beeing able to run pgsql integration tests as described in
the according README.md
Since page templates keep changing, some pages that contained forms with
CSRF token no longer have them.
It leads to some calls of `GetCSRF` returning an empty string, which
fails the tests. Like
3269b04d61/tests/integration/attachment_test.go (L62-L63)
The test did try to get the CSRF token and provided it, but it was
empty.
Multiple chunks are uploaded with type "block" without using
"appendBlock" and eventually out of order for bigger uploads.
8MB seems to be the chunk size
This change parses the blockList uploaded after all blocks to get the
final artifact size and order them correctly before calculating the
sha256 checksum over all blocks
Fixes#31354
This PR addresses the missing `bin` field in Composer metadata, which
currently causes vendor-provided binaries to not be symlinked to
`vendor/bin` during installation.
In the current implementation, running `composer install` does not
publish the binaries, leading to issues where expected binaries are not
available.
By properly declaring the `bin` field, this PR ensures that binaries are
correctly symlinked upon installation, as described in the [Composer
documentation](https://getcomposer.org/doc/articles/vendor-binaries.md).
Remove unused CSRF options, decouple "new csrf protector" and "prepare"
logic, do not redirect to home page if CSRF validation falis (it
shouldn't happen in daily usage, if it happens, redirecting to home
doesn't help either but just makes the problem more complex for "fetch")
Fixes#31937
- Add missing comment reply handling
- Use `onGiteaRun` in the test because the fixtures are not present
otherwise (did this behaviour change?)
Compare without whitespaces.
A 500 status code was thrown when passing a non-existent target to the
create release API. This snapshot handles this error and instead throws
a 404 status code.
Discovered while working on #31840.
https://github.com/go-fed/httpsig seems to be unmaintained.
Switch to github.com/42wim/httpsig which has removed deprecated crypto
and default sha256 signing for ssh rsa.
No impact for those that use ed25519 ssh certificates.
This is a breaking change for:
- gitea.com/gitea/tea (go-sdk) - I'll be sending a PR there too
- activitypub using deprecated crypto (is this actually used?)
All refs under `refs/pull` should only be changed from Gitea inside but
not by pushing from outside of Gitea.
This PR will prevent the pull refs update but allow other refs to be
updated on the same pushing with `--mirror` operations.
The main changes are to add checks on `update` hook but not
`pre-receive` because `update` will be invoked by every ref but
`pre-receive` will revert all changes once one ref update fails.
We had an issue where a repo was using LFS to store a file, but the user
did not push the file. When trying to view the file, Gitea returned a
500 HTTP status code referencing `ErrLFSObjectNotExist`. It appears the
intent was the render this file as plain text, but the conditional was
flipped. I've also added a test to verify that the file is rendered as
plain text.
Support compression for Actions logs to save storage space and
bandwidth. Inspired by
https://github.com/go-gitea/gitea/issues/24256#issuecomment-1521153015
The biggest challenge is that the compression format should support
[seekable](https://github.com/facebook/zstd/blob/dev/contrib/seekable_format/zstd_seekable_compression_format.md).
So when users are viewing a part of the log lines, Gitea doesn't need to
download the whole compressed file and decompress it.
That means gzip cannot help here. And I did research, there aren't too
many choices, like bgzip and xz, but I think zstd is the most popular
one. It has an implementation in Golang with
[zstd](https://github.com/klauspost/compress/tree/master/zstd) and
[zstd-seekable-format-go](https://github.com/SaveTheRbtz/zstd-seekable-format-go),
and what is better is that it has good compatibility: a seekable format
zstd file can be read by a regular zstd reader.
This PR introduces a new package `zstd` to combine and wrap the two
packages, to provide a unified and easy-to-use API.
And a new setting `LOG_COMPRESSION` is added to the config, although I
don't see any reason why not to use compression, I think's it's a good
idea to keep the default with `none` to be consistent with old versions.
`LOG_COMPRESSION` takes effect for only new log files, it adds `.zst` as
an extension to the file name, so Gitea can determine if it needs
decompression according to the file name when reading. Old files will
keep the format since it's not worth converting them, as they will be
cleared after #31735.
<img width="541" alt="image"
src="https://github.com/user-attachments/assets/e9598764-a4e0-4b68-8c2b-f769265183c9">
Lunny Xiao