gparted/configure.ac

413 lines
13 KiB
Plaintext
Raw Normal View History

AC_INIT([gparted],[1.2.0-git],[https://gitlab.gnome.org/GNOME/gparted/issues])
AC_PREREQ([2.50])
AC_CONFIG_SRCDIR([src/main.cc])
AC_CONFIG_HEADERS([config.h])
AC_CONFIG_MACRO_DIR([m4])
Silence subdir-objects warning from automake 1.14 (#781978) Configuring GParted on a machine with automake >= 1.14 produces this warning: $ ./autogen.sh ... lib/gtest/Makefile.am:58: warning: source file 'src/gtest-all.cc' is in a subdirectory, lib/gtest/Makefile.am:58: but option 'subdir-objects' is disabled automake: warning: possible forward-incompatibility. automake: At least a source file is in a subdirectory, but the 'subdir-objects' automake: automake option hasn't been enabled. For now, the corresponding output automake: object file(s) will be placed in the top-level directory. However, automake: this behaviour will change in future Automake versions: they will automake: unconditionally cause object files to be placed in the same subdirectory automake: of the corresponding sources. automake: You are advised to start using 'subdir-objects' option throughout your automake: project, to avoid future incompatibilities. lib/gtest/Makefile.am:60: warning: source file 'src/gtest_main.cc' is in a subdirectory, lib/gtest/Makefile.am:60: but option 'subdir-objects' is disabled lib/gtest/Makefile.am: installing './depcomp' tests/Makefile.am:22: warning: source file '../src/BlockSpecial.cc' is in a subdirectory, tests/Makefile.am:22: but option 'subdir-objects' is disabled tests/Makefile.am:23: warning: source file '../src/PipeCapture.cc' is in a subdirectory, tests/Makefile.am:23: but option 'subdir-objects' is disabled ... From the automake 1.14 NEWS file: http://git.savannah.gnu.org/cgit/automake.git/tree/NEWS?h=v1.14#n125 "The next major Automake version (2.0) will unconditionally activate the 'subdir-objects' option. In order to smooth out the transition, we now give a warning (in the category 'unsupported') whenever a source file is present in a subdirectory but the 'subdir-object' is not enabled. For example, the following usage will trigger such a warning: bin_PROGRAMS = sub/foo sub_foo_SOURCES = sub/main.c sub/bar.c " Set the subdir-objects automake option, silencing the warning. Bug 781978 - Add Google Test C++ test framework
2017-06-21 06:55:59 -06:00
AM_INIT_AUTOMAKE([1.9 subdir-objects])
2004-09-19 16:32:22 -06:00
AM_MAINTAINER_MODE
2004-09-19 14:24:53 -06:00
2004-09-20 09:46:21 -06:00
2004-09-23 13:32:57 -06:00
dnl======================
dnl checks for programs
2004-09-23 13:32:57 -06:00
dnl======================
2004-09-19 14:24:53 -06:00
AC_PROG_CXX
AC_PROG_CC
AC_PROG_LIBTOOL
AC_PROG_AWK
dnl Check for pkg-config early to avoid splitting message when first used.
PKG_CHECK_EXISTS
2004-09-19 14:24:53 -06:00
dnl======================
dnl Find graphical privilege escalation program
dnl======================
dnl Check for pkexec >= 0.102 for it's ability to run X11 apps.
AM_CONDITIONAL([INSTALL_POLKIT_ACTIONS], false)
PKEXEC_REQUIRED_VERSION='0.102'
AC_MSG_CHECKING([for pkexec >= $PKEXEC_REQUIRED_VERSION])
PKEXEC_REQUIRED_INT=`echo "$PKEXEC_REQUIRED_VERSION" | $AWK -F. '{print $1 * 10000 + $2}'`
PKEXEC_VERSION_OUTPUT=`pkexec --version 2> /dev/null` ||
AC_MSG_RESULT([not found])
if test "x$PKEXEC_VERSION_OUTPUT" != 'x'; then
PKEXEC_FOUND_VERSION=`echo "$PKEXEC_VERSION_OUTPUT" | head -1 | cut -d' ' -f3`
PKEXEC_FOUND_INT=`echo "$PKEXEC_FOUND_VERSION" | $AWK -F. '{print $1 * 10000 + $2}'`
AC_MSG_RESULT([$PKEXEC_FOUND_VERSION found])
if test "$PKEXEC_FOUND_INT" -ge "$PKEXEC_REQUIRED_INT"; then
GKSUPROG='pkexec --disable-internal-agent'
AC_SUBST([GKSUPROG])
AM_CONDITIONAL([INSTALL_POLKIT_ACTIONS], true)
fi
fi
dnl Check for alternative graphical privilege escalation programs.
if test "x$GKSUPROG" = 'x'; then
AC_CHECK_PROGS([GKSUPROG], [gksudo gksu kdesudo "xdg-su -c"], [])
fi
2004-09-23 13:32:57 -06:00
dnl======================
dnl i18n stuff
2004-09-23 13:32:57 -06:00
dnl======================
2004-09-20 09:46:21 -06:00
GETTEXT_PACKAGE=gparted
AC_SUBST([GETTEXT_PACKAGE])
AC_DEFINE_UNQUOTED([GETTEXT_PACKAGE], "$GETTEXT_PACKAGE", [description])
2004-09-20 09:46:21 -06:00
AM_GLIB_GNU_GETTEXT
Add required polkit action file (#776437) An action file is always needed with polkit to describe the privileged actions that are available to the subject (client program). For GParted the only available action is to run the gparted shell script as root. Note that the polkit action file will be installed into location $(prefix)/share/polkit-1/actions. This is required by the GNU Coding Standards [1] and to prevent 'make distcheck' from failing [2]. However polkit only uses /usr/share/polkit-1/actions for it's action files [3]. This dilemma was discussed in this Bugzilla bug 776437 and on the general Automake discussion email list [4]. The solution is to simply document in the README file that a manual additional installation step may be required. The action file is marked as translatable with the underscore (_) of the _description and _message tags identifying the string to be translated. Use of INTLTOOL_POLICY_RULE in Makefile.am to merge translations into the polkit action file necessitates increasing the minimum version of intltool to 0.36.0 where it was first introduced in intltool.m4. This will prevent GParted building on RedHat/CentOS 5 which only has intltool 0.35.0. But that doesn't matter because RedHat/CentOS 5 reached end of life on 31st March 2017. [1] GNU Coding Standards, 7.2.5 Variables for Installation Directories https://www.gnu.org/prep/standards/standards.html#Directory-Variables [2] Automake Manual, 27.10 Installing to Hard-Coded Locations https://www.gnu.org/software/automake/manual/automake.html#Hard_002dCoded-Install-Paths "My package needs to populate the installation directory of another package at install-time. I can easily compute that installation directory in configure, but if I install files therein, 'make distcheck' fails. How else should I do?" [3] polkit(8), Declaring Actions https://www.freedesktop.org/software/polkit/docs/latest/polkit.8.html#polkit-declaring-actions "A mechanism need to declare a set of actions in order to use polkit. Actions correspond to operations that clients can request the mechanism to carry out and are defined in XML files that the mechanism installs into the /usr/share/polkit-1/actions directory." [4] Not installing to hard-coded locations vs polkit's fixed location http://lists.gnu.org/archive/html/automake/2017-08/msg00015.html Bug 776437 - GParted fails to run as root under Wayland
2017-06-24 03:39:37 -06:00
IT_PROG_INTLTOOL([0.36.0])
2004-09-23 13:32:57 -06:00
dnl======================
dnl checks for libs
2004-09-23 13:32:57 -06:00
dnl======================
AC_CHECK_LIB([uuid], [uuid_generate], [], AC_MSG_ERROR([*** libuuid not found.]))
AC_CHECK_LIB([dl], [dlopen], [], AC_MSG_ERROR([*** libdl not found.]))
AC_CHECK_LIB([parted], [ped_device_read], [], AC_MSG_ERROR([*** libparted not found.]))
dnl Check for minimum required libparted version.
dnl 1) Check using pkg-config.
dnl (Older distros tend to not provide pkg-config information for libparted).
dnl 2) Check by linking and running a program to report libparted version directly.
LIBPARTED_REQUIRED_VERSION='2.2'
AC_MSG_CHECKING([for libparted >= $LIBPARTED_REQUIRED_VERSION (querying pkg-config)])
LIBPARTED_REQUIRED_INT=`echo "$LIBPARTED_REQUIRED_VERSION" |
Fix configuration version compare issue affecting libparted from GIT (#753525) When configuring GParted build with libparted from GIT it may perform the version compares incorrectly and think the version of libparted is higher that it actually is. Libparted uses the number of commits from the last git tag as the third part of the version number. For example install libparted from one commit before release 3.1, 142 commits after release 3.0. $ git checkout v3.1^ $ describe v3.0-142-g82327a3 $ ./bootstrap $ ./configure --prefix=/tmp/parted-3.0-git $ make && make install Configure GParted: $ export CPPFLAGS=-I/tmp/parted-3.0-git/include $ export LDFLAGS=-L/tmp/parted-3.0-git/lib $ export LD_RUN_PATH=/tmp/parted-3.0-git/lib $ export PKG_CONFIG_PATH=/tmp/parted-3.0-git/lib/pkgconfig $ ./configure ... checking for libparted >= 1.7.1 (querying pkg-config)... 3.0.142-8232 checking for 2.0 <= libparted <= 3.0 (loop table creation doesn't delete old partitions)... (cached) no checking for libparted >= 2.2 (improved pt re-read)... (cached) yes checking for ped_file_system_resize in -lparted... no checking for ped_file_system_resize in -lparted-fs-resize... yes checking for libparted >= 3.2 (online resize)... (cached) no ... Libparted is reported as version 3.0.142, but checking of the version between 2.0 and 3.0 inclusive fails. The configure script is multiplying components of the version by 100 when adding them together. $ echo 3.0.142-8232 | awk -F. '{print $1 * 10000 + $2 * 100 + $3}' 30142 So it is only allowing up to 99 commits before it is equivalent to the second minor number increasing by one. Increase the multiplication factor to 10000, allowing up to 9999 commits between releases. An order of magnitude more commits than so far seen between parted releases. Bug 753525 - Configuration issues when using non-system location or non-released versions of libparted
2015-08-11 12:29:12 -06:00
$AWK -F. '{print $1 * 1000000 + $2 * 10000 + $3}'`
dnl 1) Check using pkg-config.
PKG_CHECK_EXISTS(
[libparted],
[LIBPARTED_FOUND_VERSION=`$PKG_CONFIG --modversion libparted`
LIBPARTED_FOUND_INT=`echo "$LIBPARTED_FOUND_VERSION" |
Fix configuration version compare issue affecting libparted from GIT (#753525) When configuring GParted build with libparted from GIT it may perform the version compares incorrectly and think the version of libparted is higher that it actually is. Libparted uses the number of commits from the last git tag as the third part of the version number. For example install libparted from one commit before release 3.1, 142 commits after release 3.0. $ git checkout v3.1^ $ describe v3.0-142-g82327a3 $ ./bootstrap $ ./configure --prefix=/tmp/parted-3.0-git $ make && make install Configure GParted: $ export CPPFLAGS=-I/tmp/parted-3.0-git/include $ export LDFLAGS=-L/tmp/parted-3.0-git/lib $ export LD_RUN_PATH=/tmp/parted-3.0-git/lib $ export PKG_CONFIG_PATH=/tmp/parted-3.0-git/lib/pkgconfig $ ./configure ... checking for libparted >= 1.7.1 (querying pkg-config)... 3.0.142-8232 checking for 2.0 <= libparted <= 3.0 (loop table creation doesn't delete old partitions)... (cached) no checking for libparted >= 2.2 (improved pt re-read)... (cached) yes checking for ped_file_system_resize in -lparted... no checking for ped_file_system_resize in -lparted-fs-resize... yes checking for libparted >= 3.2 (online resize)... (cached) no ... Libparted is reported as version 3.0.142, but checking of the version between 2.0 and 3.0 inclusive fails. The configure script is multiplying components of the version by 100 when adding them together. $ echo 3.0.142-8232 | awk -F. '{print $1 * 10000 + $2 * 100 + $3}' 30142 So it is only allowing up to 99 commits before it is equivalent to the second minor number increasing by one. Increase the multiplication factor to 10000, allowing up to 9999 commits between releases. An order of magnitude more commits than so far seen between parted releases. Bug 753525 - Configuration issues when using non-system location or non-released versions of libparted
2015-08-11 12:29:12 -06:00
$AWK -F. '{print $1 * 1000000 + $2 * 10000 + $3}'`
AC_MSG_RESULT([$LIBPARTED_FOUND_VERSION])
test "$LIBPARTED_FOUND_INT" -ge "$LIBPARTED_REQUIRED_INT" ||
AC_MSG_ERROR([*** libparted too old. Require libparted >= $LIBPARTED_REQUIRED_VERSION but only found libparted $LIBPARTED_FOUND_VERSION.])
],
[AC_MSG_RESULT([not found])
dnl 2) Check by linking and running a program to report libparted version
dnl directly.
AC_MSG_CHECKING([for libparted >= $LIBPARTED_REQUIRED_VERSION (querying libparted)])
AC_RUN_IFELSE(
[AC_LANG_SOURCE(
[[
#include <stdio.h>
#include <stdlib.h>
#include <parted/parted.h>
int main()
{
const char *version = ped_get_version();
if (version == NULL)
{
fprintf(stderr, "ERROR: ped_get_version() returned NULL\n");
return EXIT_FAILURE;
}
printf("%s\n", version);
return EXIT_SUCCESS;
}
]]
)],
dnl Run test program again to cache libparted version.
[LIBPARTED_FOUND_VERSION=`./conftest$EXEEXT`
LIBPARTED_FOUND_INT=`echo "$LIBPARTED_FOUND_VERSION" |
Fix configuration version compare issue affecting libparted from GIT (#753525) When configuring GParted build with libparted from GIT it may perform the version compares incorrectly and think the version of libparted is higher that it actually is. Libparted uses the number of commits from the last git tag as the third part of the version number. For example install libparted from one commit before release 3.1, 142 commits after release 3.0. $ git checkout v3.1^ $ describe v3.0-142-g82327a3 $ ./bootstrap $ ./configure --prefix=/tmp/parted-3.0-git $ make && make install Configure GParted: $ export CPPFLAGS=-I/tmp/parted-3.0-git/include $ export LDFLAGS=-L/tmp/parted-3.0-git/lib $ export LD_RUN_PATH=/tmp/parted-3.0-git/lib $ export PKG_CONFIG_PATH=/tmp/parted-3.0-git/lib/pkgconfig $ ./configure ... checking for libparted >= 1.7.1 (querying pkg-config)... 3.0.142-8232 checking for 2.0 <= libparted <= 3.0 (loop table creation doesn't delete old partitions)... (cached) no checking for libparted >= 2.2 (improved pt re-read)... (cached) yes checking for ped_file_system_resize in -lparted... no checking for ped_file_system_resize in -lparted-fs-resize... yes checking for libparted >= 3.2 (online resize)... (cached) no ... Libparted is reported as version 3.0.142, but checking of the version between 2.0 and 3.0 inclusive fails. The configure script is multiplying components of the version by 100 when adding them together. $ echo 3.0.142-8232 | awk -F. '{print $1 * 10000 + $2 * 100 + $3}' 30142 So it is only allowing up to 99 commits before it is equivalent to the second minor number increasing by one. Increase the multiplication factor to 10000, allowing up to 9999 commits between releases. An order of magnitude more commits than so far seen between parted releases. Bug 753525 - Configuration issues when using non-system location or non-released versions of libparted
2015-08-11 12:29:12 -06:00
$AWK -F. '{print $1 * 1000000 + $2 * 10000 + $3}'`
test "$LIBPARTED_FOUND_INT" -ge "$LIBPARTED_REQUIRED_INT" ||
AC_MSG_ERROR([*** libparted too old. Require libparted >= $LIBPARTED_REQUIRED_VERSION but only found libparted $LIBPARTED_FOUND_VERSION.])
],
[AC_MSG_ERROR([*** Error querying libparted version. Check config.log for details.])]
)]
)
Fix failure to recognise whole disk file systems in certain cases (#743181) When the following conditions were met GParted would fail to recognise a newly created whole disk device file system, and instead show an unknown file system filling the disk: 1) Disk was previously partitioned and contained at least one partition. 2) Using libparted version 2.0 to 3.0 inclusive. Initial status: # blkid | fgrep sdc # fgrep sdc /proc/partitions 8 32 976762584 sdc 8 33 104857600 sdc1 # parted /dev/sdc GNU Parted 2.4 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA ST1000LM024 HN-M (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 107GB 107GB primary When creating the loop partition table libparted would not inform the kernel to delete the old partitions. /proc/partitions still contained the details of the old partitions. (parted) mktable loop Warning: The existing disk label on /dev/sdc will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? Yes (parted) print Model: ATA ST1000LM024 HN-M (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags (parted) quit # fgrep sdc /proc/partitions 8 32 976762584 sdc 8 33 104857600 sdc1 Creation of the whole disk device file system goes unnoticed by blkid because the kernel and therefore blkid's cache have stale partition information. # mkfs.xfs -f /dev/sdc # blkid | fgrep sdc NOTE: On a Linux Software RAID array, as opposed to a hard disk, blkid does notice creation of the whole disk device file system. However the kernel still has old partition details. This was fixed in libparted 3.1 by commit: http://git.savannah.gnu.org/cgit/parted.git/commit/?id=f5c909c0cd50ed52a48dae6d35907dc08b137e88 libparted: remove has_partitions check to allow loopback partitions Fix by deleting old partitions before creating the loop table when compiled with a broken version of libparted. The GParted UI provides no feedback while a new partition table is created, and with some versions of GTK the UI become unresponsive too, so it is important to be as fast as possible. Evaluated three different methods, deleting 15 and 22 MSDOS partitions on a physical 5400 RPM hard drive using libparted 2.4: M1) Delete and commit one partition at a time. Takes up to 24 seconds to delete 15 partitions. With 22 partitions libparted always reports finding some of the partitions busy and unable to inform the kernel about the modifications. Too slow and doesn't work. M2) Delete all partitions in one go and commit once. Takes up to 1.4 seconds to delete either 15 or 22 partitions. Never removes partitions 17 and higher from the kernel. Doesn't work. M3) Write GPT table (letting libparted delete any old partitions). Takes up to 0.8 seconds to delete either 15 or 22 partitions. Fast and works. Use method 3 - write a GPT table thus using libparted code to inform the kernel of the old partition deletions. Bug 743181 - Add unpartitioned drive read-write support
2015-02-21 09:43:42 -07:00
dnl Check for libparted 2.0 to 3.0 inclusive for a bug where loop table
dnl creation doesn't delete old partitions.
LIBPARTED_MIN_WANTED_VERSION='2.0'
LIBPARTED_MAX_WANTED_VERSION='3.0'
AC_MSG_CHECKING([for $LIBPARTED_MIN_WANTED_VERSION <= libparted <= $LIBPARTED_MAX_WANTED_VERSION (loop table creation doesn't delete old partitions)])
LIBPARTED_MIN_WANTED_INT=`echo "$LIBPARTED_MIN_WANTED_VERSION" |
Fix configuration version compare issue affecting libparted from GIT (#753525) When configuring GParted build with libparted from GIT it may perform the version compares incorrectly and think the version of libparted is higher that it actually is. Libparted uses the number of commits from the last git tag as the third part of the version number. For example install libparted from one commit before release 3.1, 142 commits after release 3.0. $ git checkout v3.1^ $ describe v3.0-142-g82327a3 $ ./bootstrap $ ./configure --prefix=/tmp/parted-3.0-git $ make && make install Configure GParted: $ export CPPFLAGS=-I/tmp/parted-3.0-git/include $ export LDFLAGS=-L/tmp/parted-3.0-git/lib $ export LD_RUN_PATH=/tmp/parted-3.0-git/lib $ export PKG_CONFIG_PATH=/tmp/parted-3.0-git/lib/pkgconfig $ ./configure ... checking for libparted >= 1.7.1 (querying pkg-config)... 3.0.142-8232 checking for 2.0 <= libparted <= 3.0 (loop table creation doesn't delete old partitions)... (cached) no checking for libparted >= 2.2 (improved pt re-read)... (cached) yes checking for ped_file_system_resize in -lparted... no checking for ped_file_system_resize in -lparted-fs-resize... yes checking for libparted >= 3.2 (online resize)... (cached) no ... Libparted is reported as version 3.0.142, but checking of the version between 2.0 and 3.0 inclusive fails. The configure script is multiplying components of the version by 100 when adding them together. $ echo 3.0.142-8232 | awk -F. '{print $1 * 10000 + $2 * 100 + $3}' 30142 So it is only allowing up to 99 commits before it is equivalent to the second minor number increasing by one. Increase the multiplication factor to 10000, allowing up to 9999 commits between releases. An order of magnitude more commits than so far seen between parted releases. Bug 753525 - Configuration issues when using non-system location or non-released versions of libparted
2015-08-11 12:29:12 -06:00
$AWK -F. '{print $1 * 1000000 + $2 * 10000 + $3}'`
Fix failure to recognise whole disk file systems in certain cases (#743181) When the following conditions were met GParted would fail to recognise a newly created whole disk device file system, and instead show an unknown file system filling the disk: 1) Disk was previously partitioned and contained at least one partition. 2) Using libparted version 2.0 to 3.0 inclusive. Initial status: # blkid | fgrep sdc # fgrep sdc /proc/partitions 8 32 976762584 sdc 8 33 104857600 sdc1 # parted /dev/sdc GNU Parted 2.4 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA ST1000LM024 HN-M (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 107GB 107GB primary When creating the loop partition table libparted would not inform the kernel to delete the old partitions. /proc/partitions still contained the details of the old partitions. (parted) mktable loop Warning: The existing disk label on /dev/sdc will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? Yes (parted) print Model: ATA ST1000LM024 HN-M (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags (parted) quit # fgrep sdc /proc/partitions 8 32 976762584 sdc 8 33 104857600 sdc1 Creation of the whole disk device file system goes unnoticed by blkid because the kernel and therefore blkid's cache have stale partition information. # mkfs.xfs -f /dev/sdc # blkid | fgrep sdc NOTE: On a Linux Software RAID array, as opposed to a hard disk, blkid does notice creation of the whole disk device file system. However the kernel still has old partition details. This was fixed in libparted 3.1 by commit: http://git.savannah.gnu.org/cgit/parted.git/commit/?id=f5c909c0cd50ed52a48dae6d35907dc08b137e88 libparted: remove has_partitions check to allow loopback partitions Fix by deleting old partitions before creating the loop table when compiled with a broken version of libparted. The GParted UI provides no feedback while a new partition table is created, and with some versions of GTK the UI become unresponsive too, so it is important to be as fast as possible. Evaluated three different methods, deleting 15 and 22 MSDOS partitions on a physical 5400 RPM hard drive using libparted 2.4: M1) Delete and commit one partition at a time. Takes up to 24 seconds to delete 15 partitions. With 22 partitions libparted always reports finding some of the partitions busy and unable to inform the kernel about the modifications. Too slow and doesn't work. M2) Delete all partitions in one go and commit once. Takes up to 1.4 seconds to delete either 15 or 22 partitions. Never removes partitions 17 and higher from the kernel. Doesn't work. M3) Write GPT table (letting libparted delete any old partitions). Takes up to 0.8 seconds to delete either 15 or 22 partitions. Fast and works. Use method 3 - write a GPT table thus using libparted code to inform the kernel of the old partition deletions. Bug 743181 - Add unpartitioned drive read-write support
2015-02-21 09:43:42 -07:00
LIBPARTED_MAX_WANTED_INT=`echo "$LIBPARTED_MAX_WANTED_VERSION" |
Fix configuration version compare issue affecting libparted from GIT (#753525) When configuring GParted build with libparted from GIT it may perform the version compares incorrectly and think the version of libparted is higher that it actually is. Libparted uses the number of commits from the last git tag as the third part of the version number. For example install libparted from one commit before release 3.1, 142 commits after release 3.0. $ git checkout v3.1^ $ describe v3.0-142-g82327a3 $ ./bootstrap $ ./configure --prefix=/tmp/parted-3.0-git $ make && make install Configure GParted: $ export CPPFLAGS=-I/tmp/parted-3.0-git/include $ export LDFLAGS=-L/tmp/parted-3.0-git/lib $ export LD_RUN_PATH=/tmp/parted-3.0-git/lib $ export PKG_CONFIG_PATH=/tmp/parted-3.0-git/lib/pkgconfig $ ./configure ... checking for libparted >= 1.7.1 (querying pkg-config)... 3.0.142-8232 checking for 2.0 <= libparted <= 3.0 (loop table creation doesn't delete old partitions)... (cached) no checking for libparted >= 2.2 (improved pt re-read)... (cached) yes checking for ped_file_system_resize in -lparted... no checking for ped_file_system_resize in -lparted-fs-resize... yes checking for libparted >= 3.2 (online resize)... (cached) no ... Libparted is reported as version 3.0.142, but checking of the version between 2.0 and 3.0 inclusive fails. The configure script is multiplying components of the version by 100 when adding them together. $ echo 3.0.142-8232 | awk -F. '{print $1 * 10000 + $2 * 100 + $3}' 30142 So it is only allowing up to 99 commits before it is equivalent to the second minor number increasing by one. Increase the multiplication factor to 10000, allowing up to 9999 commits between releases. An order of magnitude more commits than so far seen between parted releases. Bug 753525 - Configuration issues when using non-system location or non-released versions of libparted
2015-08-11 12:29:12 -06:00
$AWK -F. '{print $1 * 1000000 + $2 * 10000 + $3}'`
Fix failure to recognise whole disk file systems in certain cases (#743181) When the following conditions were met GParted would fail to recognise a newly created whole disk device file system, and instead show an unknown file system filling the disk: 1) Disk was previously partitioned and contained at least one partition. 2) Using libparted version 2.0 to 3.0 inclusive. Initial status: # blkid | fgrep sdc # fgrep sdc /proc/partitions 8 32 976762584 sdc 8 33 104857600 sdc1 # parted /dev/sdc GNU Parted 2.4 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA ST1000LM024 HN-M (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 107GB 107GB primary When creating the loop partition table libparted would not inform the kernel to delete the old partitions. /proc/partitions still contained the details of the old partitions. (parted) mktable loop Warning: The existing disk label on /dev/sdc will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? Yes (parted) print Model: ATA ST1000LM024 HN-M (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags (parted) quit # fgrep sdc /proc/partitions 8 32 976762584 sdc 8 33 104857600 sdc1 Creation of the whole disk device file system goes unnoticed by blkid because the kernel and therefore blkid's cache have stale partition information. # mkfs.xfs -f /dev/sdc # blkid | fgrep sdc NOTE: On a Linux Software RAID array, as opposed to a hard disk, blkid does notice creation of the whole disk device file system. However the kernel still has old partition details. This was fixed in libparted 3.1 by commit: http://git.savannah.gnu.org/cgit/parted.git/commit/?id=f5c909c0cd50ed52a48dae6d35907dc08b137e88 libparted: remove has_partitions check to allow loopback partitions Fix by deleting old partitions before creating the loop table when compiled with a broken version of libparted. The GParted UI provides no feedback while a new partition table is created, and with some versions of GTK the UI become unresponsive too, so it is important to be as fast as possible. Evaluated three different methods, deleting 15 and 22 MSDOS partitions on a physical 5400 RPM hard drive using libparted 2.4: M1) Delete and commit one partition at a time. Takes up to 24 seconds to delete 15 partitions. With 22 partitions libparted always reports finding some of the partitions busy and unable to inform the kernel about the modifications. Too slow and doesn't work. M2) Delete all partitions in one go and commit once. Takes up to 1.4 seconds to delete either 15 or 22 partitions. Never removes partitions 17 and higher from the kernel. Doesn't work. M3) Write GPT table (letting libparted delete any old partitions). Takes up to 0.8 seconds to delete either 15 or 22 partitions. Fast and works. Use method 3 - write a GPT table thus using libparted code to inform the kernel of the old partition deletions. Bug 743181 - Add unpartitioned drive read-write support
2015-02-21 09:43:42 -07:00
if test "$LIBPARTED_MIN_WANTED_INT" -le "$LIBPARTED_FOUND_INT" -a \
"$LIBPARTED_FOUND_INT" -le "$LIBPARTED_MAX_WANTED_INT"; then
need_loop_delete_old_ptns_workaround=yes
AC_DEFINE([ENABLE_LOOP_DELETE_OLD_PTNS_WORKAROUND], 1,
[Define to 1 to enable deletion of old partitions before creating a loop table workaround])
AC_MSG_RESULT([(cached) yes])
else
need_loop_delete_old_ptns_workaround=no
AC_MSG_RESULT([(cached) no])
fi
dnl Check for ped_file_system_resize() function to determine the existence
dnl of the API in the original parted library. Available in parted <= 2.4.
dnl
dnl NOTE:
dnl For AC_CHECK_LIB the default action-if-found ($3) includes extending
dnl LIBS with the newly found library ($1) thus:
dnl LIBS="-l$1 $LIBS"
dnl
dnl As the default action-if-found is overridden, LIBS isn't extended so
dnl saving and restoring LIBS isn't required.
have_old_lp_fs_resize_api=no
AC_CHECK_LIB(
[parted], [ped_file_system_resize],
[have_old_lp_fs_resize_api=yes]
)
dnl If not already found, check for ped_file_system_resize() function in
dnl the parted-fs-resize library to determine the need to use the new
dnl library. Available in parted >= 3.1.
have_new_lp_fs_resize_lib=no
AS_IF(
[test "x$have_old_lp_fs_resize_api" != xyes],
[AC_CHECK_LIB(
[parted-fs-resize], [ped_file_system_resize],
[have_new_lp_fs_resize_lib=yes
LIBS="-lparted-fs-resize $LIBS"
]
)]
)
dnl Check for libparted >= 3.2 for online resize support.
LIBPARTED_WANTED_VERSION='3.2'
AC_MSG_CHECKING([for libparted >= $LIBPARTED_WANTED_VERSION (online resize)])
LIBPARTED_WANTED_INT=`echo "$LIBPARTED_WANTED_VERSION" |
Fix configuration version compare issue affecting libparted from GIT (#753525) When configuring GParted build with libparted from GIT it may perform the version compares incorrectly and think the version of libparted is higher that it actually is. Libparted uses the number of commits from the last git tag as the third part of the version number. For example install libparted from one commit before release 3.1, 142 commits after release 3.0. $ git checkout v3.1^ $ describe v3.0-142-g82327a3 $ ./bootstrap $ ./configure --prefix=/tmp/parted-3.0-git $ make && make install Configure GParted: $ export CPPFLAGS=-I/tmp/parted-3.0-git/include $ export LDFLAGS=-L/tmp/parted-3.0-git/lib $ export LD_RUN_PATH=/tmp/parted-3.0-git/lib $ export PKG_CONFIG_PATH=/tmp/parted-3.0-git/lib/pkgconfig $ ./configure ... checking for libparted >= 1.7.1 (querying pkg-config)... 3.0.142-8232 checking for 2.0 <= libparted <= 3.0 (loop table creation doesn't delete old partitions)... (cached) no checking for libparted >= 2.2 (improved pt re-read)... (cached) yes checking for ped_file_system_resize in -lparted... no checking for ped_file_system_resize in -lparted-fs-resize... yes checking for libparted >= 3.2 (online resize)... (cached) no ... Libparted is reported as version 3.0.142, but checking of the version between 2.0 and 3.0 inclusive fails. The configure script is multiplying components of the version by 100 when adding them together. $ echo 3.0.142-8232 | awk -F. '{print $1 * 10000 + $2 * 100 + $3}' 30142 So it is only allowing up to 99 commits before it is equivalent to the second minor number increasing by one. Increase the multiplication factor to 10000, allowing up to 9999 commits between releases. An order of magnitude more commits than so far seen between parted releases. Bug 753525 - Configuration issues when using non-system location or non-released versions of libparted
2015-08-11 12:29:12 -06:00
$AWK -F. '{print $1 * 1000000 + $2 * 10000 + $3}'`
if test "$LIBPARTED_FOUND_INT" -ge "$LIBPARTED_WANTED_INT"; then
have_online_resize=yes
AC_MSG_RESULT([(cached) yes])
else
have_online_resize=no
AC_MSG_RESULT([(cached) no])
fi
dnl Check if have libparted fs resize capability
if test [ ${have_old_lp_fs_resize_api} = yes -o ${have_new_lp_fs_resize_lib} = yes ]; then
AC_DEFINE([HAVE_LIBPARTED_FS_RESIZE], [1], [Define to 1 if have libparted fs resize capability])
fi
dnl gthread
PKG_CHECK_MODULES([GTHREAD], [gthread-2.0])
AC_SUBST([GTHREAD_LIBS])
AC_SUBST([GTHREAD_CFLAGS])
dnl GTKMM
port-to-gtk3: Use Gdk::AppLaunchContext to launch yelp (#7) gdk_spawn_command_line_on_screen() is not present in Gtk3. The documentation from Gtkmm 2.24 states [1]: gdk_spawn_command_line_on_screen has been deprecated since version 2.24 and should not be used in newly-written code. This function is being removed in 3.0. Use either g_spawn_command_line_sync(), g_spawn_command_line_async() or GdkAppLaunchContext instead. g_spawn_command_line_sync() and g_spawn_command_line_async() are screen / display agnostic, as such we would loose functionality. There is a workaround, which involves setting the DISPLAY environment variable [2], but it's a weak solution (and I don't know if it works on backends other than X11). GdkAppLaunchContext is an implementation of GIO's GAppLaunchContext that handles launching an application in a graphical context [3]. Therefore use GdkAppLaunchContext and GIO's GAppInfo. GdkAppLaunchContext was introduced in Gtk2 version 2.14. The C++ wrapper Gdk::AppLaunchContext was introduced only in Gtkmm3 version 3.4 [4]. Bump the minimum required version of Gtkmm to 3.4.0 for this requirement. GAppInfo was introduced in GLib version 2.16. The C++ wrapper Gio::AppInfo was introduced in Giomm version 2.16. Note that the minimum required version for glibmm is already 2.32. [1] GDK 2 Reference Manual, GdkScreen, gdk_spawn_on_screen() https://developer.gnome.org/gdk2/2.24/GdkScreen.html#gdk-spawn-on-screen [2] Migrating from GTK+ 2.x to GTK+ 3 - "Use GIO for launching applications" https://developer.gnome.org/gtk3/stable/gtk-migrating-2-to-3.html#id-1.6.3.3.7 [3] GDK 3 Reference Manual - "Application launching" https://developer.gnome.org/gdk3/stable/gdk3-Application-launching.html [4] Gtkmm 3.4 Gdk::AppLaunchContext Class Reference, Detailed Description https://developer.gnome.org/gtkmm/3.4/classGdk_1_1AppLaunchContext.html#details Closes #7 - Port to Gtk3
2018-08-09 02:26:44 -06:00
PKG_CHECK_MODULES([GTKMM], [gtkmm-3.0 >= 3.4.0])
AC_SUBST([GTKMM_LIBS])
AC_SUBST([GTKMM_CFLAGS])
2004-09-23 13:32:57 -06:00
2004-09-20 09:46:21 -06:00
dnl Check for glibmm minimum required version.
Remove deprecated Glib::thread_init() (!22) Use of Glib::thread_init() was deprecated in glibmm 2.32 [1]. The oldest supported distributions have these versions: Debian 8 glibmm 2.42.0 RHEL / CentOS 7 glibmm 2.56.0 SLES 12 glibmm 2.38.1 Ubuntu 14.04 LTS glibmm 2.39.93 Checking further the glibmm 2.32 reference manual says this about Glib::thread_init() [2]: Initializes the GLib thread system. Deprecated: Calling thread_init() is no longer necessary and no longer has any effect. However only some of the glibmm example programs had Glib::thread_init() removed, others had it replaced by Glib::init() [3]. Again the glibmm 2.32 reference manual says this about Glib::init() [4]: Initialize glibmm. You may call this more than once. You do not need to call this if you are using Glib::MainLoop or Gtk::Main, because they call it for you. GParted does call Gtk::Main and test_PipeCapture does call Glib::MainLoop. Therefore just raise the minimum version to glibmm 2.32 and remove both calls to Glib::thread_init(). [1] Glibmm 2.32 NEWS file https://gitlab.gnome.org/GNOME/glibmm/blob/2.32.0/NEWS#L207 [2] glibmm 2.32, glibmm: Glib Namespace Reference, Glib::thread_init() https://developer.gnome.org/glibmm/2.32/namespaceGlib.html#ab26d01c776801f1fff00753e97af4fc7 [3] glibmm commit "Avoid use of deprecates API in tests and examples." https://gitlab.gnome.org/GNOME/glibmm/commit/3e0fbb22c0d4814de4174d32e12a45cbad79980e [4] glibmm 2.32, glibmm: Glib Namespace Reference, Glib::init() https://developer.gnome.org/glibmm/2.32/namespaceGlib.html#ac90aee10d0b90e3d8a96a86b5394f87b Closes !22 - Increase minimums to libparted 2.2 and glibmm 2.32
2018-12-24 02:52:15 -07:00
PKG_CHECK_MODULES([GLIBMM], [glibmm-2.4 >= 2.32.0])
need_cxx_compile_stdcxx_11=no
dnl Check for glibmm >= 2.45.40 which requires C++11 compilation.
AC_MSG_CHECKING([for glibmm >= 2.45.40 which requires C++11 compilation])
PKG_CHECK_EXISTS(
[glibmm-2.4 >= 2.45.40],
[need_cxx_compile_stdcxx_11=yes
AC_MSG_RESULT([yes])
],
[AC_MSG_RESULT([no])]
)
dnl Check for libsigc++ >= 2.5.1 which requires C++11 compilation.
AC_MSG_CHECKING([for libsigc++ >= 2.5.1 which requires C++11 compilation])
PKG_CHECK_EXISTS(
[sigc++-2.0 >= 2.5.1],
[need_cxx_compile_stdcxx_11=yes
AC_MSG_RESULT([yes])
],
[AC_MSG_RESULT([no])]
)
dnl Check for gtkmm >= 3.18.0 which requires C++11 compilation.
AC_MSG_CHECKING([for gtkmm >= 3.18.0 which requires C++11 compilation])
PKG_CHECK_EXISTS(
[gtkmm-3.0 >= 3.18.0],
[need_cxx_compile_stdcxx_11=yes
AC_MSG_RESULT([yes])
],
[AC_MSG_RESULT([no])]
)
dnl Enable C++11 compilation only if required.
if test "x$need_cxx_compile_stdcxx_11" = xyes; then
AX_CXX_COMPILE_STDCXX_11()
fi
Set the xalign property for Gtk::Labels (!40) With the same case as from the previous commit, the very long "Mounted on ..." text is now wrapped, but the text may not be left justified. Slowly adjust the dialog width and see how the text wrapping is updated to fit the size adjustment but the text is centred rather than left justified. This is because setting the halign property to Gtk::ALIGN_START does not guarantee left alignment of text for wrapped or ellipsized Gtk::Labels. Use the xalign property instead. To set the xalign property there is a method in the GtkMisc (Gtk::Misc) base class: gtk_misc_set_alignment (Gtk::Misc::set_alignment) However, GtkMisc (Gtk::Misc) was deprecated in Gtk 3.14 (Gtkmm 3.14) and in Gtk 3.16 (gtkmm 3.16) set_alignment() was replaced with the introduction of two new methods: gtk_label_set_xalign (Gtk::Label::set_xalign) gtk_label_set_yalign (Gtk::Label::set_yalign) Add a check for Gtkmm method Gtk::Label::set_xalign() in configure.ac and use it when available. References: [1] Gtk3 Reference Documentation - gtk_misc_set_alignment() https://developer.gnome.org/gtk3/stable/GtkMisc.html#gtk-misc-set-alignment "gtk_misc_set_alignment has been deprecated since version 3.14 and should not be used in newly-written code. Use GtkWidget's alignment ("halign" and "valign") and margin properties or GtkLabel's "xalign" and "yalign" properties." [2] Gtkmm 3.16 Gtk::Misc Class Reference, set_alignment() method https://developer.gnome.org/gtkmm/3.16/classGtk_1_1Misc.html#a52b2675874cf46a3097938756b9fe9e8 [3] GNOME BugZilla - EmptyBoxes: instructions_label's alignment is off https://bugzilla.gnome.org/show_bug.cgi?id=735841 [4] Gtk commit from 2014-09-16: GtkLabel: add x/yalign properties https://gitlab.gnome.org/GNOME/gtk/commit/d39424fc [5] Gtk3 Reference Documentation - gtk_label_set_xalign() https://developer.gnome.org/gtk3/stable/GtkLabel.html#gtk-label-set-xalign [6] Gtkmm 3.16 Gtk::Label Class Reference, set_xalign() method https://developer.gnome.org/gtkmm/3.16/classGtk_1_1Label.html#acee7d4e87d7cc14080a7b8ded5f84e5e Closes !40 - Limit wrapping labels
2019-05-03 07:42:45 -06:00
dnl Check for gtkmm >= 3.16 to determine availability of Gtk::Label::set_xalign().
AC_MSG_CHECKING([for Gtk::Label::set_xalign() method])
PKG_CHECK_EXISTS(
[gtkmm-3.0 >= 3.16.0],
[AC_DEFINE([HAVE_LABEL_SET_XALIGN], 1,
[Define to 1 if gtkmm provides Gtk::Label::set_xalign() method.])
AC_MSG_RESULT([yes])
],
[AC_MSG_RESULT([no])]
)
Request natural width in Gtk::ScrolledWindows for Gtk >= 3.22 (!39) Before Gtk 3.22 GtkScrolledWindow propagated natural size to its Children and so on to descendants. In Gtk 3.22 this was changed to always request the minimum size. This was done because it is believed to be a safer default (gives a better behaviour) in case of dynamic content inside the scrolled window, that is, content that may change allocated size. [1][2][3] When the scrolled window content is not dynamic the natural size is preferable because it gives a better looking layout and without any downside. In the case of GParted content which is not dynamic, so request the scrolled windows to allocate children at natural sizes for Gtk >= 3.22. The benefits of natural size allocation are evident in presence of wrapping labels (for example inside the "Partition Info" dialog), that with the minimum size request likely end up taking a very small width. References: [1] Gtk commit from 2016-08-31: GtkScrolledWindow: Make propagation of natural child sizes optional https://gitlab.gnome.org/GNOME/gtk/commit/0984d1622d022bf67207f985f7842b6299818e20 "Making propagation of child natural sizes mandatory (or default, even) was evidently a mistake as this causes dynamic content in a scrolled window to resize it's parent when the scrolled window is competing for space with an adjacent widget." [2] Gtk 3.22 Reference Documentation - gtk_scrolled_window_set_propagate_natural_width https://developer.gnome.org/gtk3/3.22/GtkScrolledWindow.html#gtk-scrolled-window-set-propagate-natural-width [3] Gtkmm 3.24 Gtk::ScrolledWindow Class Reference, set_propagate_natural_width() method https://developer.gnome.org/gtkmm/3.24/classGtk_1_1ScrolledWindow.html#a2d4cb945688ecb8739efd70b18742779 [4] Gtkmm 3.21.6 NEWS https://gitlab.gnome.org/GNOME/gtkmm/blob/3.21.6/NEWS "ScrolledWindow: Added get/set_propagate_natural_height/width() and the properties." Closes !39 - Always request natural size inside Gtk::ScrolledWindow
2019-05-01 04:57:38 -06:00
dnl Check for gtkmm >= 3.22 to determine availability of Gtk::ScrolledWindow::set_propagate_natural_width().
AC_MSG_CHECKING([for Gtk::ScrolledWindow::set_propagate_natural_width() method])
PKG_CHECK_EXISTS(
[gtkmm-3.0 >= 3.22.0],
[AC_DEFINE([HAVE_SET_PROPAGATE_NATURAL_WIDTH], 1,
[Define to 1 if gtkmm provides Gtk::ScrolledWindow::set_propagate_natural_width() method.])
AC_MSG_RESULT([yes])
],
[AC_MSG_RESULT([no])]
)
dnl Definitions for building of and with gtest. Gets flags for pthread via earlier
dnl gthread package check.
GTEST_CPPFLAGS="-DGTEST_HAS_PTHREAD=1"
GTEST_CXXFLAGS="$GTHREAD_CFLAGS $GTKMM_CFLAGS"
GTEST_LDFLAGS=
GTEST_LIBS="$GTHREAD_LIBS $GTKMM_LIBS"
AC_SUBST([GTEST_CPPFLAGS])
AC_SUBST([GTEST_CXXFLAGS])
AC_SUBST([GTEST_LDFLAGS])
AC_SUBST([GTEST_LIBS])
dnl======================
dnl check whether to build documentation - gnome-doc-utils
dnl======================
AC_ARG_ENABLE(
[doc],
AS_HELP_STRING(
[--disable-doc],
dnl Autoconf quadrigraphs '@<:@' = '[' and '@:>@' = ']'
[disable building help documentation @<:@default=enabled@:>@]),
[enable_doc=$enableval],
[enable_doc=yes]
)
AC_MSG_CHECKING([whether help documentation should be built])
if test "x$enable_doc" = xyes; then
AC_DEFINE([ENABLE_HELP_DOC], [1], [Define to 1 when help documentation is built])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
if test "x$enable_doc" = xyes; then
dnl YELP_HELP_INIT has to start at column 0 for gnome-autogen.sh to detect it
dnl and automatically required yelp.m4.
YELP_HELP_INIT
fi
AM_CONDITIONAL([BUILD_HELP_DOC], [test "x$enable_doc" = xyes])
dnl======================
dnl check whether to use native libparted dmraid support
dnl======================
AC_ARG_ENABLE(
[libparted_dmraid],
AS_HELP_STRING(
[--enable-libparted-dmraid],
[use native libparted /dev/mapper dmraid support @<:@default=disabled@:>@]),
[enable_libparted_dmraid=$enableval],
[enable_libparted_dmraid=no]
)
AC_MSG_CHECKING([whether to use native libparted /dev/mapper dmraid support])
if test "x$enable_libparted_dmraid" = xyes; then
AC_DEFINE([USE_LIBPARTED_DMRAID], [1],
[Define to 1 to use native libparted /dev/mapper dmraid support])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
dnl======================
dnl check whether to enable online resize support
dnl======================
AC_ARG_ENABLE(
[online-resize],
AS_HELP_STRING(
[--enable-online-resize],
[enable online resize support @<:@default=auto@:>@]),
[enable_online_resize=$enableval],
[enable_online_resize=$have_online_resize]
)
AC_MSG_CHECKING([whether online resize support is enabled])
if test "x$enable_online_resize" = xyes; then
AC_DEFINE([ENABLE_ONLINE_RESIZE], [1], [Define to 1 if online resize is enabled])
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
dnl Check whether to explicitly grant root access to the display.
AC_ARG_ENABLE(
[xhost-root],
AS_HELP_STRING(
[--enable-xhost-root],
[enable explicitly granting root access to the display @<:@default=disabled@:>@]),
[enable_xhost_root=$enableval],
[enable_xhost_root=no]
)
AC_MSG_CHECKING([whether to explicitly grant root access to the display])
if test "x$enable_xhost_root" = 'xyes'; then
AC_MSG_RESULT([yes])
else
AC_MSG_RESULT([no])
fi
AC_SUBST([ENABLE_XHOST_ROOT], $enable_xhost_root)
AC_CONFIG_FILES([
2004-09-19 14:24:53 -06:00
Makefile
data/Makefile
data/icons/Makefile
doc/Makefile
help/Makefile
2004-09-19 14:24:53 -06:00
include/Makefile
lib/Makefile
lib/gtest/Makefile
2004-09-19 14:24:53 -06:00
src/Makefile
2004-09-20 09:46:21 -06:00
po/Makefile.in
tests/Makefile
2004-09-19 14:24:53 -06:00
])
AC_OUTPUT
dnl======================
dnl Summary
dnl======================
echo ""
echo "======================== Final configuration ==========================="
echo " Installing into prefix : $prefix"
echo ""
echo " Build help documentation? : $enable_doc"
echo ""
echo " Use native libparted dmraid support? : $enable_libparted_dmraid"
echo ""
echo " Explicitly grant root access to the display? : $enable_xhost_root"
echo ""
echo " --- Features Based On Libparted Version ---"
Fix failure to recognise whole disk file systems in certain cases (#743181) When the following conditions were met GParted would fail to recognise a newly created whole disk device file system, and instead show an unknown file system filling the disk: 1) Disk was previously partitioned and contained at least one partition. 2) Using libparted version 2.0 to 3.0 inclusive. Initial status: # blkid | fgrep sdc # fgrep sdc /proc/partitions 8 32 976762584 sdc 8 33 104857600 sdc1 # parted /dev/sdc GNU Parted 2.4 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) print Model: ATA ST1000LM024 HN-M (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 107GB 107GB primary When creating the loop partition table libparted would not inform the kernel to delete the old partitions. /proc/partitions still contained the details of the old partitions. (parted) mktable loop Warning: The existing disk label on /dev/sdc will be destroyed and all data on this disk will be lost. Do you want to continue? Yes/No? Yes (parted) print Model: ATA ST1000LM024 HN-M (scsi) Disk /dev/sdc: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: loop Number Start End Size File system Flags (parted) quit # fgrep sdc /proc/partitions 8 32 976762584 sdc 8 33 104857600 sdc1 Creation of the whole disk device file system goes unnoticed by blkid because the kernel and therefore blkid's cache have stale partition information. # mkfs.xfs -f /dev/sdc # blkid | fgrep sdc NOTE: On a Linux Software RAID array, as opposed to a hard disk, blkid does notice creation of the whole disk device file system. However the kernel still has old partition details. This was fixed in libparted 3.1 by commit: http://git.savannah.gnu.org/cgit/parted.git/commit/?id=f5c909c0cd50ed52a48dae6d35907dc08b137e88 libparted: remove has_partitions check to allow loopback partitions Fix by deleting old partitions before creating the loop table when compiled with a broken version of libparted. The GParted UI provides no feedback while a new partition table is created, and with some versions of GTK the UI become unresponsive too, so it is important to be as fast as possible. Evaluated three different methods, deleting 15 and 22 MSDOS partitions on a physical 5400 RPM hard drive using libparted 2.4: M1) Delete and commit one partition at a time. Takes up to 24 seconds to delete 15 partitions. With 22 partitions libparted always reports finding some of the partitions busy and unable to inform the kernel about the modifications. Too slow and doesn't work. M2) Delete all partitions in one go and commit once. Takes up to 1.4 seconds to delete either 15 or 22 partitions. Never removes partitions 17 and higher from the kernel. Doesn't work. M3) Write GPT table (letting libparted delete any old partitions). Takes up to 0.8 seconds to delete either 15 or 22 partitions. Fast and works. Use method 3 - write a GPT table thus using libparted code to inform the kernel of the old partition deletions. Bug 743181 - Add unpartitioned drive read-write support
2015-02-21 09:43:42 -07:00
echo " Need delete old partitions before"
echo " creating a loop table workaround? : $need_loop_delete_old_ptns_workaround"
echo " Have old libparted file system resizing API? : $have_old_lp_fs_resize_api"
echo " Have new libparted file system resizing LIB? : $have_new_lp_fs_resize_lib"
echo " Enable online resize support? : $enable_online_resize"
echo ""
echo " If all settings are OK, type make and then (as root) make install"
echo "========================================================================"