Set the minimum file system size to 16 MiB as creating a bcachefs that
size succeeds:
$ truncate -s $((16*1024*1024)) /tmp/disk.img
$ bcachefs format /tmp/disk.img
...
initializing new filesystem
going read-write
initializing freespace
$ echo $?
0
Where as creating a smaller file system fails for most sizes below that:
$ rm /tmp/disk.img
$ truncate -s $((15*1024*1024)) /tmp/disk.img
$ bcachefs format /tmp/disk.img
...
mounting version 1.6: btree_subvolume_children
initializing new filesystem
going read-write
bch2_trans_mark_dev_sb(): error ENOSPC_disk_reservation
bch2_fs_initialize(): error marking superblocks ENOSPC_disk_reservation
bch2_fs_initialize(): error ENOSPC_disk_reservation
bch2_fs_start(): error starting filesystem ENOSPC_disk_reservation
error opening /tmp/disk.img: ENOSPC_disk_reservation
$ echo $?
1
Closes!123 - Add support for bcachefs, single device file systems only
As CentOS has been discontinued remove references to it from the README.
Also update package manager command from yum to dnf now RHEL 8 is the
earliest supported release.
When preparing the GParted Live 1.6.0 distribution, which is based on
Debian unstable ("sid"), compiling GParted failed like this:
$ make
...
/usr/bin/msgfmt --desktop --template gparted.desktop.in -d ./po -o gparted.desktop
chmod +x gparted
/usr/bin/msgfmt --xml --template org.gnome.gparted.policy.in -d ./po -o org.gnome.gparted.policy
/usr/bin/msgfmt: cannot locate ITS rules for org.gnome.gparted.policy.in
make[3]: *** [Makefile:1060: org.gnome.gparted.policy] Error 1
make[3]: *** Waiting for unfinished jobs....
make[3]: Leaving directory '/root/gparted/gparted-1.6.0-beta1'
make[2]: *** [Makefile:618: all-recursive] Error 1
make[2]: Leaving directory '/root/gparted/gparted-1.6.0-beta1'
make[1]: *** [Makefile:452: all] Error 2
make[1]: Leaving directory '/root/gparted/gparted-1.6.0-beta1'
dh_auto_build: error: make -j16 returned exit code 2
make: *** [debian/rules:9: build] Error 25
dpkg-buildpackage: error: debian/rules build subprocess returned exit
status 2
debuild: fatal error at line 1184:
dpkg-buildpackage -us -uc -ui failed
This was also previously reported in the GParted Forum [1]. Future
Debian 13 ("trixie") and Ubuntu 24.04 LTS ("nobel") releases have moved
the needed gettext translation rules for .policy XML files:
/usr/share/gettext/its/policy.its
/usr/share/gettext/its/policy.loc
to new package libpolkit-gobject-1-dev not installed by default.
Document this new build time dependency.
Also see commits [2][3] where the equivalent change was needed in the
Alpine Linux and CentOS continuous integration images.
[1] GParted forum / [SOLVED] Unable to build "msgfmt: cannot locate ITS
rules for org..."
http://gparted-forum.surf4.info/viewtopic.php?id=18136
[2] 57ae8f888b
Fix .policy file translation failure in Alpine Linux CI image (!107)
[3] 8450d8c605
Fix .policy file translation failure in CentOS CI image (!107)
Closed!121 - Document future Debian/Ubuntu build time dependency in
README
... now Attempt Data Rescue has been removed and GParted no longer has
code to show "file:/tmp/gparted-roview-XXXXXX" URIs. Missed in earlier
commit:
8ce9074ac6
Remove Attempt Data Rescue and use of gpart (!118)
gpart scans a drive trying to guess the location of partitions when an
MBR partition table is lost [1]. However the tool is unmaintained,
takes hours or days of 100% CPU time to scan a drive and provides no
progress indication [2][3][4]. We keep recommending killing the gpart
process and using TestDisk [5] instead.
Therefore remove Device > Attempt Data Rescue and the use of gpart from
GParted.
[1] Gpart
https://github.com/baruch/gpart
[2] Have you had a good or bad experience with Dev->Attempt Data Rescue?
http://gparted-forum.surf4.info/viewtopic.php?id=17992
No good, only bad experiences using gpart were reported.
[3] Gparted does not say anything
http://gparted-forum.surf4.info/viewtopic.php?id=17749
Forum user reported waiting 48 hours with no progress indication.
We recommended using TestDisk.
[4] How cancel Data Rescue process?
http://gparted-forum.surf4.info/viewtopic.php?id=18143
Forum user reported it will take 3 days to scan their external 480GB
drive. We recommended using TestDisk instead.
[5] TestDisk, Data Recovery
https://www.cgsecurity.org/wiki/TestDiskCloses!118 - Remove Attempt Data Rescue and use of gpart
Remove mention of intltool as it's now unused.
Add polkit to the list of dependencies to build GParted from source as
gettext always explicitly translates the org.gnome.gparted.policy file.
Add polkit-devel and gettext-devel packages to the packages needing
installing on various distributions to get the gettext translation rules
for .policy files and the autopoint build tool installed.
(Distributions such as Debian and Ubuntu split the packages differently.
Gettext translation rules for .policy files are in the base policykit-1
package and the autopoint tool is in the autopoint package which I
assume is always installed as part of the development tool set. Hence
no change to the command to install dependent packages on these
distributions. See the earlier commit messages for more details).
Closes!107 - Migrate from intltool to gettext translation
With exfatprogs (https://github.com/exfatprogs/exfatprogs) installed the
following operations on exFAT file systems are supported:
- Creation
- Checking
- Labelling
As of the current exfatprogs 1.0.4 the following are not supported:
- Reading usage
- Resizing
- Updating the UUID
Closes!30 - Add exFAT support
Upstream NILFS project calls the package nilfs-utils [1][2]. Arch Linux
/ CentOS / Fedora / OpenSUSE use the upstream name. However Debian /
Ubuntu name it nilfs-tools [3] instead.
Document the needed software as:
nilfs-utils / nilfs-tools
Upstream name first separated by slash from alternative names
distributions use.
[1] NILFS Download page
https://nilfs.sourceforge.io/en/download.html
[2] NILFS Public Git Repositories
https://nilfs.sourceforge.io/en/git_repos.html
[3] Debian package: nilfs-tools
https://packages.debian.org/sid/nilfs-tools
- Back in Fedora 22 the distribution switched from using yum to dnf for
package installation, while CentOS / RHEL continues to use yum.
Separate out package instructions.
- Update package dependencies for what is required on current versions
of the documented distributions.
Second part is to use yelp-tools to build and install the documentation.
Have to rename the help Manual from help/C/gparted.xml to
help/C/index.docbook in accordance with this note from the GNOME Goal:
Port to New Documentation Infrastructure [1]:
IMPORTANT: If this is for a DocBook document, the top-level DocBook
file MUST be renamed to index.docbook. Do a "git mv" and include
index.docbook in HELP_FILES.
Commits from gucharmap [4] and totem [5], projects which have DocBook
documentation, making this same change are also useful references.
[1] GNOME Goal: Port To New Documentation Infrastructure
https://wiki.gnome.org/Initiatives/GnomeGoals/NewDocumentationInfrastructure
[2] Yelp > Yelp Tools > yelp.m4
http://yelp.io/tools/yelp.m4.html
[3] GNOME application developement overview / User help / Set up your
build system
https://developer.gnome.org/platform-overview/stable/dev-help-build.html.en
[4] gucharmap commit "Port to new documentation infrastructure"
3e1526c056
[5] totem commit "Use new documentation infrastructure"
59a6bd6064Closes!24 - Port to GNOME 3 yelp-tools documentation infrastructure
Details of old GNOME 2 gnome-doc-utils:
Migrating your documentation to gnome-doc-utils
https://wiki.gnome.org/Projects/GnomeDocUtils/MigrationHowTo
First part is to stop using gnome-doc-utils to build and install the
documentation. Also since updating the OMF catalog was only needed for
GNOME 2 yelp, use of scrollkeeper is completely removed too.
Closes!24 - Port to GNOME 3 yelp-tools documentation infrastructure
Util-linux package, at least as far back as version 2.23.2 as found on
CentOS 7, provides the mkfs.minix and fsck.minix commands. Also blkid
from the same package, recognises minix file systems.
Create version 3 file systems because MINIX 3 [1] is the only supported
version and that reportedly uses version 3 of the file system [2].
[1] MINIX 3 / History
https://en.wikipedia.org/wiki/MINIX_3#History
[2] Regarding MINIX 3 file system
https://groups.google.com/forum/#!topic/minix3/3-TeHR_23X8
"MINIX 3 uses Minix File System (MFS). More precisely MFS V3."
Closes!12 - Add minix file system support
Scrollkeeper and the associated OMF catalog files are used by the
GNOME 2 version of yelp to display the GParted help manual. To see how
this works try the following command:
yelp ghelp:gparted
GNOME version 3 and higher yelp do not require scrollkeeper or the OMF
catalog files to properly display the GParted help manual. And in fact
GNOME 3 deprecated the GNOME 2 method of building and installing GNOME
help documents altogether; including use of GNOME_DOC_INIT autoconf
macro, the gnome-doc-utils package and use of scrollkeeper.
[GNOME 3] GNOME Goal: Port To New Documentation Infrastructure
https://wiki.gnome.org/Initiatives/GnomeGoals/NewDocumentationInfrastructure
Further, the next release of Debian, Debian 10 (Buster), will be
removing the scrollkeeper / rarian package.
rarian: Don't release with Buster
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=885657
GParted is still a GNOME 2 app using GNOME 2 documentation build system
using autoconf GNOME_DOC_INIT macro.
[GNOME 2] Migrating your documentation to gnome-doc-utils
https://wiki.gnome.org/Projects/GnomeDocUtils/MigrationHowTo
This is needed to build GParted documentation on still supported GNOME 2
distributions RHEL / CentOS 6. So avoid requiring deprecated
scrollkeeper on GNOME 3 by automatically disabling scrollkeeper database
updates when the scrollkeeper-update command is not available.
Executable | Configure option used | Use scrollkeeper
scrollkeeper-update | on command line | when building help
exists? | | for GParted?
--------------------+------------------------+-------------------
Yes | <none> | Yes
Yes | --enable-scrollkeeper | Yes
Yes | --disable-scrollkeeper | No
| |
No | <any> | No
Note that because GParted is still using the GNOME 2 documentation build
system it still builds and installs OMF files. It is just that they are
not required with GNOME 3 yelp and this commit automatically disables
updating the scrollkeeper database when the scrollkeeper-update command
is not available.
Bug 743318 - configure script missing check for scrollkeeper dependency
GParted fails to display when run under Wayland [1][2][3]. This is
because by intentional design Wayland doesn't allow applications with
root privileges access to the display [4].
As an interim workaround make the gparted shell wrapper use xhost to
grant root access to the X11 server if root doesn't already have access,
but only when configured. Granting root access must be explicitly
enabled when building GParted like this:
./configure --enable-xhost-root
It defaults to disabled. When gpartedbin binary ends the shell wrapper
revokes root access only if it granted such access.
[1] GNOME Bug 776437 - GParted fails to run as root under Wayland
https://bugzilla.gnome.org/show_bug.cgi?id=776437
[2] Ubuntu Bug 1652282 - GParted does not work in GNOME on Wayland
https://bugs.launchpad.net/ubuntu/+source/gparted/+bug/1652282
[3] Fedora Bug 1397103 - gparted not working under Wayland
https://bugzilla.redhat.com/show_bug.cgi?id=1397103
[4] Common Fedora 25 bugs
Running graphical apps with root privileges (e.g. gparted) does not
work on Wayland
https://fedoraproject.org/wiki/Common_F25_bugs#wayland-root-apps
Bug 776437 - GParted fails to run as root under Wayland
On CentOS 6 with polkit version 0.96 pkexec fails to execute gparted
shell wrapper as root like this:
$ env | grep DISPLAY
DISPLAY=:0.0
$ sh -x /usr/local/bin/gparted
...
+ pkexec /usr/local/bin/gparted
(gpartedbin:8011): Gtk-WARNING **: cannot open display:
This is because polkit didn't support setting the DISPLAY environment
variable to allow execution of X11 applications until the introduction
of the allow_gui annotation by this commit in polkit 0.102:
https://cgit.freedesktop.org/polkit/commit/?id=7850d27017fed1834268a852350ae85381fbb110
Bug 38769 - pkexec: Support running X11 apps
Make configure only use pkexec version 0.102 or higher as the privilege
escalation program. Otherwise configure falls back to checking for the
other privilege escalation programs as it did before.
Bug 776437 - GParted fails to run as root under Wayland
An action file is always needed with polkit to describe the privileged
actions that are available to the subject (client program). For GParted
the only available action is to run the gparted shell script as root.
Note that the polkit action file will be installed into location
$(prefix)/share/polkit-1/actions. This is required by the GNU Coding
Standards [1] and to prevent 'make distcheck' from failing [2]. However
polkit only uses /usr/share/polkit-1/actions for it's action files [3].
This dilemma was discussed in this Bugzilla bug 776437 and on the
general Automake discussion email list [4]. The solution is to simply
document in the README file that a manual additional installation step
may be required.
The action file is marked as translatable with the underscore (_) of the
_description and _message tags identifying the string to be translated.
Use of INTLTOOL_POLICY_RULE in Makefile.am to merge translations into
the polkit action file necessitates increasing the minimum version of
intltool to 0.36.0 where it was first introduced in intltool.m4. This
will prevent GParted building on RedHat/CentOS 5 which only has intltool
0.35.0. But that doesn't matter because RedHat/CentOS 5 reached end of
life on 31st March 2017.
[1] GNU Coding Standards, 7.2.5 Variables for Installation Directories
https://www.gnu.org/prep/standards/standards.html#Directory-Variables
[2] Automake Manual, 27.10 Installing to Hard-Coded Locations
https://www.gnu.org/software/automake/manual/automake.html#Hard_002dCoded-Install-Paths
"My package needs to populate the installation directory of another
package at install-time. I can easily compute that installation
directory in configure, but if I install files therein,
'make distcheck' fails. How else should I do?"
[3] polkit(8), Declaring Actions
https://www.freedesktop.org/software/polkit/docs/latest/polkit.8.html#polkit-declaring-actions
"A mechanism need to declare a set of actions in order to use
polkit. Actions correspond to operations that clients can request
the mechanism to carry out and are defined in XML files that the
mechanism installs into the /usr/share/polkit-1/actions directory."
[4] Not installing to hard-coded locations vs polkit's fixed location
http://lists.gnu.org/archive/html/automake/2017-08/msg00015.html
Bug 776437 - GParted fails to run as root under Wayland
Many of the distributions (confirmed for Arch Linux, Debian, Fedora,
OpenSUSE, RedHat/CentOS and Ubuntu but likely many others too) are now
using polkit as the mechanism to authorise privileged actions, including
using it to authorise GParted to run as root in their packages of
GParted. Therefore make the GParted configure script check for the
pkexec command.
Use pkexec with the --disable-internal-agent option when available,
preventing pkexec using it's own textual authentication agent. When
running GParted from a desktop icon or menu there is no terminal with
which to interact with the textual authentication agent to it can't be
used. The desktop's graphical agent must be running. This matches how
some distributions already use polkit in their own packages of GParted.
Required actions file will be added in the next commit.
polkit(8)
https://www.freedesktop.org/software/polkit/docs/latest/polkit.8.html
pkexec(1)
https://www.freedesktop.org/software/polkit/docs/latest/pkexec.1.html
Bug 776437 - GParted fails to run as root under Wayland
Move calling of the privilege escalation program which allows a normal
user to run GParted as root from the desktop file into the gparted
wrapper script. This is in preparation for further changes needed to
grant root access to the X11 display under Wayland.
Don't introduce yet another script so that there aren't two different
names to run GParted by for normal users and root. Using the same
gparted name but placing two different scripts at /usr/bin/gparted and
/usr/sbin/gparted is not possible because on Arch Linux /usr/sbin is a
symbolic link to /usr/bin.
Frequently asked questions, Does Arch follow the FHS?
https://wiki.archlinux.org/index.php/Frequently_asked_questions#Does_Arch_follow_the_FHS.3F
"Arch Linux follows the file system hierarchy for operating systems
using the systemd service manager. See file-hierarchy(7) for an
explanation of each directory along with their designations. In
particular, /bin, /sbin, and /usr/sbin are symbolic links to
/usr/bin, and /lib (and /lib64 if applicable) are symbolic links to
/usr/lib".
Bug 776437 - GParted fails to run as root under Wayland
Add support for detecting UDF file systems and formatting hard disks
with revision 2.01 UDF file systems using udftools. Formatting optical
disks or any other media types is not supported yet. Changing label or
UUID after formatting is not supported as the tools do not yet exist.
Bug 784533 - Add support for UDF file system
Vol_id has been retired and removed from all supported distributions.
See earlier commit "Remove use of retired vol_id from FS_Info module
(#767842)" for more details. Therefore remove it's use from GParted
entirely.
When configuring GParted build with a custom install of libparted the
configure script is using the wrong version number for the version of
libparted. It uses the version of the system install of libparted,
rather that the version of the specified custom install of libparted.
For example configuring GParted build on CentOS 7 with system provided
libparted 3.1 and custom install of libparted 3.2 from GIT in
/tmp/parted-3.2-git:
$ export CPPFLAGS=-I/tmp/parted-3.2-git/include
$ export LDFLAGS=-L/tmp/parted-3.2-git/lib
$ export LD_RUN_PATH=/tmp/parted-3.2-git/lib
$ ./configure
...
checking for libparted >= 1.7.1 (querying pkg-config)... 3.1
checking for 2.0 <= libparted <= 3.0 (loop table creation doesn't delete old partitions)... (cached) no
checking for libparted >= 2.2 (improved pt re-read)... (cached) yes
checking for ped_file_system_resize in -lparted... no
checking for ped_file_system_resize in -lparted-fs-resize... yes
checking for libparted >= 3.2 (online resize)... (cached) no
...
$ make
$ ldd src/gpartedbin | fgrep libparted
libparted-fs-resize.so.0 => /tmp/parted-3.2-git/lib/libparted-fs-resize.so.0 (0x00007f9a460ee000)
libparted.so.2 => /tmp/parted-3.2-git/lib/libparted.so.2 (0x00007f9a45ea3000)
Configure script used version 3.1 as reported by pkg-config to make most
of the decisions (those version related checks with cached results) but
the executable was still linked with the custom libparted 3.2 install.
Temporarily rename the system libparted pkg-config file out of the way:
# cd /usr/lib64/pkgconfig
# mv libparted.pc libparted.pc-NOT
and reconfigure the GParted build:
$ ./configure
...
checking for libparted >= 1.7.1 (querying pkg-config)... not found
checking for libparted >= 1.7.1 (querying libparted)... 3.2.25-5a92
checking for 2.0 <= libparted <= 3.0 (loop table creation doesn't delete old partitions)... (cached) no
checking for libparted >= 2.2 (improved pt re-read)... (cached) yes
checking for ped_file_system_resize in -lparted... no
checking for ped_file_system_resize in -lparted-fs-resize... yes
checking for libparted >= 3.2 (online resize)... (cached) yes
...
Now configure is having to compile a program with the custom install of
libparted and gets the correct version.
Restore libparted pkg-config file:
# mv libparted.pc-NOT libparted.pc
and this time set environment variable PKG_CONFIG_PATH to inform
pkg-config of the additional directory to search for .pc files before
the default system location:
$ export PKG_CONFIG_PATH=/tmp/parted-3.2-git/lib/pkgconfig
$ ./configure
...
checking for libparted >= 1.7.1 (querying pkg-config)... 3.2.25-5a92
checking for 2.0 <= libparted <= 3.0 (loop table creation doesn't delete old partitions)... (cached) no
checking for libparted >= 2.2 (improved pt re-read)... (cached) yes
checking for ped_file_system_resize in -lparted... no
checking for ped_file_system_resize in -lparted-fs-resize... yes
checking for libparted >= 3.2 (online resize)... (cached) yes
...
Now configure is getting the correct version of the custom install of
libparted when querying pkg-config and thus making the correct
decisions.
Update the README file to reflect the need to also set the
PKG_CONFIG_PATH environment variable when building GParted with a custom
install of libparted.
Bug 753525 - Configuration issues when using non-system location or
non-released versions of libparted
The ntfs-3g package previously provided the FUSE based NTFS driver to
mount the file system and ntfsprogs provided the user space tools. In
April 2011 the packages have merged [1] forming ntfs-3g_ntfsprogs. Arch
Linux / Debian / Slackware / Ubuntu now just have an ntfs-3g package
with everything; where as CentOS / Fedora / openSUSE are sticking with
the original two package names. Reverse the order of the needed
packages to:
ntfs-3g / ntfsprogs
[1] Release: NTFS-3G + NTFSPROGS 2011.4.12
http://www.tuxera.com/release-ntfs-3g-ntfsprogs-2011-4-12/
For reiserfs the upstream package is named reiserfsprogs. Arch Linux /
Debian / Slackware / Ubuntu use this name; but CentOS / Fedora name it
reiserfs-utils and openSUSE names it just reiserfs. Update the README
file with all 3 package names.
reiserfsprogs / reiserfs-utils / reiserfs
In the File System Support dialog just use the first 2 package names as
we don't want to make the dialog too wide with all 3 names and hopefully
on openSUSE it is more obvious that the reiserfs package is needed to
support the reiserfs file system.
NOTE:
Again this slightly increases the width of the File System Support
dialog on my CentOS 6 desktop with default fonts, now from 676 to 707
pixels. Again still well within the 800 wide target and still narrower
than the main window.
Bug 753436 - Update documentation of GParted software dependencies
In Fedora bug report:
Bug 1176108 - Warning shown on BTRFS partition because of missing btrfs-tools package
https://bugzilla.redhat.com/show_bug.cgi?id=1176108#c0
The user said:
However there is no btrfs-tools package in the standard Fedora repo.
There is a btrfs-progs package, which is already installed. It's
unclear whether this is a real error or simply a mismatched package
name.
The upstream software is named btrfs-progs. Arch Linux / CentOS /
Fedora / Slackware use the upstream name. Debian / Ubuntu name it
btrfs-tools and openSUSE calls it btrfsprogs (no dash).
Rename the needed software to:
btrfs-progs / btrfs-tools
Upstream name first separated by slash from alternative names
distributions use.
NOTE:
This slightly increases the width of the File System Support dialog on
my CentOS 6 desktop with default fonts, from 655 to 676 pixels. Still
well within the 800 wide target and still narrower that the main window.
Bug 753436 - Update documentation of GParted software dependencies
Update the README file to document the blkid command as a mandatory
requirement for GParted. GParted will run without blkid but it is
needed to detect a number of file systems which libparted doesn't and in
a number of other situations.
Blkid is needed to detect these file systems:
exfat
f2fs
ReFS
SWRaid
ZFS
Blkid also detects these file systems (for which GParted has simple
internal detection but libparted, mostly, doesn't detect):
btrfs (detected by libparted >= 3.2)
LVM2 PV
LUKS
nilfs2 (detected by libparted >= 2.4)
reiser4
Blkid is also needed for these commits:
1) f8faee6377
Avoid whole disk FAT being detected as MSDOS partition table (#743181)
(with libparted 1.9.0 to 2.3 inclusive)
2) 9e5e9f5627
Enhance file system detection to use FS_Info method - blkid
(Detect file systems with sector sizes other than 512 bytes with
libparted 2.2)
Other changes to the DISTRIBUTION NOTES section of the README file:
* Drop NOTE about vol_id and blkid being used to read volume labels for
specific file systems and read the UUIDs. Vol_id was deprecated in
May 2009 and is not included in any currently supported distribution.
Blkid is now mandatory. List of optional commands at the end of the
section seems to cover everything that is necessary.
* Indent description of optional commands at the end of the section to
match the indentation earlier in the section.
* Line wrap the section at column 72 to match the rest of the file.
Bug 753436 - Update documentation of GParted software dependencies
Run "hdparm -I /dev/DISK" to get the hard drive serial number of
every device which has one and display it in the Device Information.
The displayed value can either be the actual serial number, "none" or
blank. "none" means the device doesn't have a hard drive serial number,
such as for Linux software RAID arrays, BIOS fake RAID arrays or USB
flash drives. Blank means something went wrong getting the serial
number. Either it couldn't be found in the hdparm output or the hdparm
command wasn't installed.
Example real hard drive:
# hdparm -I /dev/sda
...
ATA device, with non-removable media
Model Number: SAMSUNG HM500JI
Serial Number: S1WFJDSZ123732
...
Example Linux software RAID array:
# hdparm -I /dev/md127
/dev/md127:
HDIO_DRIVE_CMD(identify) failed: Inappropriate ioctl for device
On my desktop with 4 internal hard drives 2 Linux software RAID arrays
on those hard drives, 2 USB flash drives and 1 USB hard drive attached,
running hdparm 9 times added 0.07 seconds to the device refresh time.
Bug 751251 - Show serial number in device information
CPPFLAGS - Needed to instruct the compiler to use libparted include
files, <parted/parted.h> etc, from the non-default location.
LD_LIBRARY_PATH - Not needed to specify an additional directory to find
libparted shared libraries at run time, as the linker build the
additional directory into the executable based on the LD_RUN_PATH
environment variable.
Configure script checks for libparted version >= 3.2 to automatically
determine the availability of online resize capability in libparted.
This can be overridden from the ./configure command line. Override
enable when an older version of libparted has been patched to include
online resize support with:
./configure --enable-online-resize
Override disable with libparted 3.2 or later to disable the feature when
it is not wanted with:
./configure --disable-online-resize
Note that GParted also requires, and checks for at runtime, Linux
kernel >= 3.6 for online resize support. See commit for more details:
de2844d02d
Add online resize support (#694622)
Bug #734076 - Autodetect parted online partition resizing capability
The gnome-common package is needed when building from the git
repository. This package was missed in the list of dependencies for
the Fedora GNU/Linux distribution.
Many file systems are capable of growing while mounted, and a few can
even shrink. This support must be explicitly enabled at configure time
with the --enable-online-resize flag and depends on a patched libparted.
Also requires kernel >= 3.6 for partition resizing, even if the
partition is in use (BLKPG_RESIZE_PARTITION).
Thanks to Mike Fleetwood for double check mark idea instead of a second
column to show the online grow/shrink.
Bug #694622 - Add support for online resize
Add xdg-su to list of possible programs used to acquire root
privileges in the gparted.desktop file.
Bug #699626 - Enable gparted.desktop to prompt for root on default
openSUSE installation
Mike Fleetwood