The reason for refactoring is to simplify the large GParted_Core
class, to help minimize disk reads, and to group the logic for
processing the file /proc/partitions into a single logical class.
This reason for refactoring is to simplify the large GParted_Core
class, to help minimize disk reads, and to group the logic for
processing the file /proc/partitions into a single logical class.
This adds initial handlers for Btrfs; only .create, .check and
.read_label are done for now, via external btrfs-tools.
Other methods are still only stubs.
Newer versions (dmraid-1.0.0-rc16?) of dmraid default to always
creating partition names by inserting the letter 'p' between the
device name and the partition number. Since this is not
consistent with older versions of dmraid, add extra logic to
ensure that newer versions of dmraid do not insert this extra
letter 'p'.
Rename method get_udev_name to get_udev_dm_name and enhance to
retrieve the property DM_NAME.
Handle situation where parted, and hence libparted, has been
configured with --disable-device-mapper. In this situation on
some distros the device name could be /dev/dm-0. This results in
invalid partition names such as /dev/dm-0p1. Add logic to decode
the actual /dev/mapper name.
Make align to MiB the default setting instead of align to cylinder.
Migrate logic for alignment to cylinder into its own method
snap_to_cylinder, and place common logic in snap_to_alignment.
Add alignment checks for situations where space is needed for Master
Boot Record or Extended Boot Record.
Adjust ranges on spin buttons according to required boot record space.
Copy fix for off by one sector (#596552) from
Dialog_Partition_New::Get_New_Partition to
Dialog_Base_Partition::Get_New_Partition
Enhance resize / move logic for checking locations of nearby logical
partitions to not depend on the partition ordering.
Note: This commit does not include limiting graphic movement according
to required boot record space.
Also add signal handler to alignment menu to update file system
minimum size.
This enhancement is to prepare for adding a third alignment
option to align to MiB.
With the removal of the 512 byte constants, such as MEBIBYTE, it
was possible to rename the _FACTOR constants back to BYTE
constants. The _FACTOR constants, such as MEBI_FACTOR, were a
temporary measure to help in the transition to support devices
with sector sizes > 512 bytes.
The device sector size is needed in all calculations that convert
between sectors and bytes. The device sector_size is included in
the partition object because this object is used to contain
operation information in addition to actual partitions and
unallocated space. A second option was considered to pass the
device object to many methods, but this was considered a much
larger task that might not provide significant gains in
maintainability.
According to parted documentation, only "msdos" and "dvh" disk
types (or partition table types) support extended partitions.
All other disk types support primary partitions only.
Remove commented code and boolean use-C-lang parameter for
Utils::num_to_str() method because this bug was fixed in
gcc-4.0.3. The GNU gcc compiler versions 4 and up are now
commonly in use. Also due to previous partial commenting and
removal of the code, the code was non-functional
Thanks goes to Jan Claeys for pointing out this clean up
opportunity.
Restore copyright entries by original author to those of his last
known repository commit titled "released gparted-0.3.4 on
LarryT's request." on Feb 25, 2007.
Add my own copyright entries for files in which I changed source
code. Files in which I only made spelling changes do not have my
copyright entry added.
Auto detection of Linux software RAID devices was lost in GParted
0.3.8. This was because device scanning by the libparted device
call ped_device_probe_all() was replaced with custom code within
GParted to scan /proc/partitions for devices.
The reason the libparted call was replaced was due to a long
scanning problem with ped_device_probe_all(), a non-existent
physical floppy device, and a BIOS setting indicating a floppy
drive existed. See bug #351753:
https://bugzilla.gnome.org/show_bug.cgi?id=351753
Improve the feedback to the user when creating or pasting a
partition on a device with no partition table found.
Prior to this enhancement if a user tried to create or paste a
partition onto a device with no partition table found, GParted
would present the user with a Create Partition Table dialog.
When creating a new partition this could cause confusion for
users who were trying to format the disk. The user could
mistakenly believe the choice of an MS-DOS file system was being
presented.
Similarly on a paste operation it could be confusing to be
presented with a dialog to create a partition table without any
explanation of why a partition table was suddenly required in the
midst of the paste operation.
Neither the new partition creation, nor the partition paste
actions were performed after the Create Partition Table dialog
was displayed.
It appears that different dmraid versions handle specifying a
single dmraid device differently.
dmraid-1.0.0.rc14 uses a partial name only,
such as "isw" or "isw_cjbdddajhi".
dmriad-1.0.0.rc15 uses a full name only,
such as "isw_cjbdddajhi_Vol0".
To maintain compatibility with the broadest range of dmraid versions,
the ability to specify a single dmraid device is being removed.
Some distros appear to display /dev/dm-# device names with
libparted. Since this fails a pattern match with the dmraid
device name, check with udev to see if a pattern match is
possible with the name returned from udevinfo or udevadm info.
For example:
/dev/mapper/isw_cjbdddajhi_Vol0 is the device name
/dev/dm-0 is a symbolic link pointing to the above device name
Normally, the blkid command will detect the UUID for a file system.
In cases where blkid fails to detect the UUID and the vol_id command
is available, then try using the vol_id command.
- Changed title Features to File System Support.
- Renamed button Refresh to Rescan Support.
- Created expander for legend and added narrative.
- Removed columns detect and read.
svn path=/trunk/; revision=966
* include/Device.h,
include/Dialog_Base_Partition.h,
src/Dialog_Base_Partition.cc: replaced 'long' with 'Sector' to
prefent overflows with really large devices.
* include/Makefile.am,
include/Operation.h,
include/Win_GParted.h,
src/GParted_Core.cc,
src/Makefile.am,
src/Win_GParted.cc,
include/OperationCheck.h (new),
src/OperationCheck.cc (new): added 'check' operation. The
functionality was already there, but it was not possible yet to
activate it from the gui.
* added support for reading volumelabels. Atm we only read ext2/3, but
the infrastructure for adding the other filesystems is in place.
It's simply a matter of finding the right commands and parsing the
output. (see #338528 for more info)
* src/Dialog_Progress.cc: make sure progressfraction stays between 0.0
and 1.0
* include/GParted_Core.h,
src/GParted_Core.cc: implemented rollback in case of failed move of
overlapping filesystems. Together with the readonly test moving
should be quite save now :)
* include/Dialog_Progress.h,
src/Dialog_Progress.cc: Show number of warnings after all operations
are completed. Also urge people to save their details in case of
error.
* include/GParted_Core.h,
src/GParted_Core.cc: declared char * buf global, so it can be
initialized in copy_blocks(). This is a lot more efficient than
initializing it on every copy_block()
* include/Partition.h,
src/Partition.cc: added test_overlap()
* include/GParted_Core.h,
src/GParted_Core.cc: perform a readonly testrun before the actual
move if destination overlaps source.
* include/GParted_Core.h,
src/GParted_Core.cc: update ntfsbootsector after first sector has
changed. This is necessary to let windows boot correctly afterwards.
* src/ntfs.cc: added FIXME
* include/GParted_Core.h,
src/GParted_Core.cc: tried to fix a couple of errors with moving to
the right with overlap (thanks Larry for hunting ;) )
Although everything seems to work well i'm still not sure if
everything is 100% ok.
I guess everything could use some more testing, which is exactly
what i plan to do this weekend :)
* happy 24th birthday Johannes! :^)
* include/GParted_Core.h,
src/GParted_Core.cc: restructured resize_move() to be more robust.
This will hopefully tackle a couple of issues which came up during
the public testing.
* include/Utils.h,
src/Utils.cc: added format_time()
* include/OperationDetail.h,
src/OperationDetail.cc: keep track of elapsed time between
STATUS_EXECUTE and STATUS_[ERROR|SUCCES]
* include/Dialog_Progress.h,
src/Dialog_Progress.cc: show elapsed time in the details per (sub)
process
* src/GParted_Core.cc: use Utils::format_time()
* include/GParted_Core.h,
src/GParted_Core.cc: fixed some issues with combi move+shrink on
fat* and hfs* filesystems.
Also call wait_for_node() from commit() if 'node' was provided.
Curtis Gedak