A user had a 190 MiB partition containing an old ext2 file system. When
unmounted it was reported as filling the partition, but when mounted it
was reported as having 6% unallocated space. The file system's inode
tables were approximately twice the size of those created by default
with the current mkfs.ext2 defaults.
To create an equivalent file system in a 190 MiB partition:
mkfs.ext2 -N 97344 /dev/sda15
It turns out that for ext2, ext3 and ext4 file systems what was
described as intrinsic unallocated space during the development of
Bug #499202 is actually file system overhead. When mounted the ext2/3/4
kernel code reports the size of the file system after subtracting the
overhead. Overhead is made up of superblock backups, group descriptors,
allocation bitmaps and largest of all inode tables. E2fsprogs tools
don't subtract this overhead when reporting the file system size.
References:
* The Second Extended File System, Internal Layout, by Dave Poirier
http://www.nongnu.org/ext2-doc/ext2.html
* Linux ext2_statfs() function
http://lxr.linux.no/#linux+v3.5.3/fs/ext2/super.c#L1311
Call the file system specific method for reading the usage of ext2, ext3
and ext4 file systems while mounted. Make it read the file system size
from the on disk superblock to avoid subtraction of overhead and use the
statvfs() system call to return an up to date free space figure.
Bug #683255 - ext2: statvfs differs from dumpe2fs (x MB unallocated
space within the partition)
Each file system class can now choose how the size and free space of the
file system is determined when it is mounted.
.fs.online_read = FS::NONE (default)
Do nothing. Don't get the file system size and free space.
.fs.online_read = FS::GPARTED
Use internal GParted method which calls statvfs() system call on
the mounted file system.
.fs.online_read = FS::EXTERNAL
Call the file system's member function set_used_sectors(). This
is the same function as called when the file system is not
mounted. It can determine if the file system is mounted or not
by testing partition.busy and acting accordingly.
This means that determining the size and free space of active LVM2
Physical Volumes is no longer a special case. Instead the lvm2_pv class
just elects to have its set_used_sectors() method called for both the
active and deactive cases.
Bug #683255 - ext2: statvfs differs from dumpe2fs (x MB unallocated
space within the partition)
On Fedora up to and including Fedora 16 and Red Hat and CentOS up to the
current 6.3 release the UUID of an unmounted reiserfs file system is
displayed as "<no" and a GTK markup warning is written to the terminal.
This was because the reiserfs-utils package isn't linked with libuuid
support so reiserfs file systems were created with a Nil UUID (all
zeros). To read the UUID GParted first tries to retrieve the UUID from
the blkid command output via the FS_Info cache. Secondly it tries the
reiserfs file system specific read_uuid() method which uses the first
space separated word following the text "UUID:", hence it gets "<no".
# debugreiserfs /dev/sda15 2> /dev/null | grep UUID
UUID: <no libuuid installed>
In September 2012 Red Hat bug 660285 "reiserfstune compiled without UUID
support" was fixed for Fedora 16 and later releases. On Fedora with
this fix applied GParted will display the Nil UUID (all zeros) for a
previously created reiserfs file system rather than suppressing it.
Only accept valid, none Nil UUIDs in the reiserfs file system specific
read_uuid() method.
Bug #684115 - Reiserfs UUID reading issues on Fedora and CentOS
As LVM2 Physical Volumes can't be resized when they are members of
exported Volume Groups add a warning message to explain this fact.
Display the message as a partition specific warning and as additional
text when growing the file system to fill the partition is skipped for
the check operation and when pasting into an existing larger partition.
Bug #670171 - Add LVM PV read-write support
When an inactive LVM2 Volume Group is exported it makes it unknown to
the local system, ready for moving the member Physical Volumes to
another system, where the VG can be imported and used. In this state a
PV can't be resized.
# lvm pvresize /dev/sda10
Volume group Test-VG1 is exported
Unable to read volume group "Test-VG1".
0 physical volume(s) resized / 1 physical volume(s) not resized
# echo $?
5
Fix this by preventing resizing of such a PV. This has been coded in a
generic way using new function filesystem_resize_disallowed() to
determine whether a file system is allowed to be resized or not. For
a file system which can be resized, but is currently not allowed to be
resized, the behaviour is as follows:
1) Pasting into unallocated space is limited to creating a new
partition which is the same size as the copied partition.
2) Resizing the partition is disallowed, only moving the partition is
allowed.
3) Pasting into an existing partition will only copy the file system.
If the destination partition is larger a warning will report that
growing the file system is not currently allowed.
4) Checking a partition will also report a warning that growing the
file system is not currently allowed.
This is exactly the same behaviour as for a file system which does not
implement resizing, except for a different warning message.
Bug #670171 - Add LVM PV read-write support
Create common cache search and index functions get_attr_by_name() and
get_attr_by_row() as the existing ones, get_pv_attr_by_*() and
get_vg_attr_by_*(), only differ from each other by the string vector
they use.
If an LVM2 Volume Group has two or more missing Physical Volumes, the VG
is displayed as only having one "unknown device" because
get_vg_members() only adds unique names to the list of members.
# lvm pvcreate /dev/sda11 /dev/sda12 /dev/sda13
# lvm vgcreate Test-VG1 /dev/sda11 /dev/sda12 /dev/sda13
# wipefs -a /dev/sda12
# wipefs -a /dev/sda13
View partition information in GParted
The simplest fix would be to include the PV's UUID in the cache of LVM2
information and add PV names based on unique UUIDs being a member of the
relevant VG. Unfortunately "lvm pvs" seems to have a bug when
displaying Logical Volume attributes, and there are two or more missing
PVs, which causes one of the PVs to be displayed multiple times, rather
than displaying each PV once.
Without LV attributes, every PV is listed:
# lvm pvs --nosuffix --separator , --units b -o pv_name,pv_uuid,vg_name,vg_attr 2> /dev/null
PV,PV UUID,VG,Attr
/dev/sda11,pJ3R51-AOPP-rKlr-CKCT-nfPS-G5FP-B5Vyjm,Test-VG1,wz-pn-
unknown device,Y72oSm-uBcE-ktZL-OIFA-Q129-Uv1B-x5IsrA,Test-VG1,wz-pn-
unknown device,1ESORF-7wlR-0tnO-fy2z-nOL1-MrnJ-2O5yjK,Test-VG1,wz-pn-
With LV attributes, one missing PV is repeated:
# lvm pvs --nosuffix --separator , --units b -o pv_name,pv_uuid,vg_name,vg_attr,lv_name,lv_attr 2> /dev/null
PV,PV UUID,VG,Attr,LV,Attr
/dev/sda11,pJ3R51-AOPP-rKlr-CKCT-nfPS-G5FP-B5Vyjm,Test-VG1,wz-pn-,,
unknown device,Y72oSm-uBcE-ktZL-OIFA-Q129-Uv1B-x5IsrA,Test-VG1,wz-pn-,,
unknown device,Y72oSm-uBcE-ktZL-OIFA-Q129-Uv1B-x5IsrA,Test-VG1,wz-pn-,,
Also "lvm vgs" and "lvm lvs" don't display anything when including both
VG and LV attributes.
Instead query the LVM2 information in two separate commands, one
querying PV attributes and one querying VG and LV attributes, saving the
results in lvm_pv_cache and lvm_vg_cache respectively.
Bug #670171 - Add LVM PV read-write support
Add const qualifier to get_pv_attr_by_path() and get_pv_attr_by_row() as
they only access member variables read-only.
Make lvm2_pv_attr_to_num() a static member function as it doesn't access
any member variables.
Rename functions and a variable to use a generic term for the menu item
which changes the busy state of partitions now that it also activates
and deactivates LVM2 Physical Volumes as well as mounting and unmounting
file systems and enables and disables swap partitions.
When attempting to delete a non-empty LVM2 Physical Volume (one which is
still a member of a Volume Group) display a warning dialog which
includes the VG name and a list of the PV members to allow the user to
make an informed choice whether to go ahead and perform the deletion or
cancel to the operation. This dialog is displayed when a partition
containing a PV is being deleted or being overwritten by being
reformatted or pasted into.
Bug #670171 - Add LVM PV read-write support
This commit only adds a remove() method to every file system and an
optional call to it in the relevant operations. All remove() methods
are no operations and not enabled.
The remove() method provides explicit controlled removal of a file
system before the partition is deleted or overwritten by being formatted
or pasted into. When implemented, it appears as an extra step in the
relevant operation. The file system specific remove() method is
explicitly allowed to fail and stop the operations currently being
applied.
This is different to the existing erase_filesystem_signatures() which
wipes any previous file system signatures immediately before a new file
system is written to ensure there is no possibility of the partition
containing two or more different file system signatures. It never fails
or reports anything to the user.
NOTE:
Most file systems should NOT implement a remove() method as it will
prevent recovery from accidental partition deletion.
Bug #670171 - Add LVM PV read-write support
In the Partition menu enable activation / deactivation of the LVM2
Volume Group of which the Physical Volume is a member.
Bug #670171 - Add LVM PV read-write support
Steps to reproduce:
1) Open any of these dialogs: Create New Partition, Resize/Move or
Paste;
2) Update any of the following numeric entry fields to a different value
using the keyboard: Free space preceding, New size or Free space
following;
3) Press [Esc] key;
Gparted crashes.
What is happening is that the [Esc] key is leading to the dialog being
closed and calling the ~Dialog_Base_Partition() destructor. However
after this the GTK widget is calling the on_spinbutton_value_change()
registered callbacks for the change to the other two values, on the now
just deleted object.
Fix by disconnecting the change notification callbacks in the
destructor.
Closes bug #682658 - GParted crash by pressing Esc in dialogs with
number entry
The member functions btrfs_size_to_num(), btrfs_size_max_delta() and
btrfs_size_to_gdouble() don't access any member variables. Therefore
they don't need the const qualifier allowing them to be called when the
btrfs object is const for read-only access to member variables, but
instead need to be static member functions with no access to member
variables.
Now that every call to calc_usage_triple() just passes usage figures
returned by get_sectors_*(), remove those parameters, call
get_sectors_*() internally and rename to get_usage_triple().
Stop using fraction_unallocated and fraction_used member variables of
the DrawingAreaVisualDisk class as intermediate storage of partition
usage fractions. Instead get the figures straight from the partition
class and use the new calc_usage_triple() to directly set pixels widths
for the partition usage graphic.
For specific partition usage values the right hand border of the
partition graphic in the Information dialog would be displayed as grey
rather than the color assigned to the partition.
Steps to reproduce fault:
Create 1024 MiB partition
# lvm pvcreate /dev/sda12
# lvm vgcreate GParted-VG1 /dev/sda12
View partition information
Fragment from Dialog_Partition_Info::init_drawingarea():
139 else if ( partition .sector_usage_known() )
140 {
141 used = Utils::round( ( 400 - BORDER *2 ) / ( dlength / partition .get_sectors_used() ) ) ;
142 unused = Utils::round( ( 400 - BORDER *2 ) / ( dlength / partition .get_sectors_unused() ) ) ;
143 unallocated = 400 - BORDER *2 - used - unused ;
144 }
For this issue the above values are both exactly x.5 and both round
upwards, resulting in unallocated being -1.
used = round((400 - 8*2)/(2097152.0/8192)) = round(1.5)
unused = round((400 - 8*2)/(2097152.0/2088960)) = round(382.5)
unallocated = 400 - 8*2 - 2 - 383 = -1
The simple fix would be to use floor() instead of round() in the
calculation of either used or unused. The same fix would also need to
be applied in Display_Info() for the calculation of the percentage
figures. Unfortunately this simple fix can lead to odd figures when the
used or unused is close to zero and floor() or ceil() is effectively
applied rather than round(). For example:
Size: 227.23 GiB
Used: 28.00 KiB ( 1% )
Unused: 180.00 GiB ( 79% )
Unallocated: 47.23 GiB ( 20% )
Used figure of 28 KiB in 227 GiB partition should be rounded to 0% but
wasn't.
Write Partition::calc_usage_triple() which calculates the "best" figures
by rounding the smaller two figures and subtracts them from the desired
total for the largest figure. Apply to the calculation of the partition
usage percentage figures in the Information dialog and the partition
usage graphic in the same dialog and the main window.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Most file systems report intrinsic unallocated space using the statvfs()
system call when mounted, but not using their own tools. They are:
ext2/3/4, fat16/32, hfs, nilfs2, reiserfs and xfs. Showing either a
little or no unallocated space, depending on whether a file system is
mounted or not, could be confusing to the user.
When all file systems are created filling their partitions the unused
figure reported by statvfs() and their own tools are the same or very
close. Also the used plus unallocated figure from statvfs() agrees with
the used figure from their own tools.
For all file systems don't display intrinsic unallocated space (that
below the threshold of 2 to 5%), instead include it as used space. As
soon as the amount of unallocated space becomes significant display it
everywhere and also trigger the warning.
For display purposes always use the new Partition methods:
get_sectors_used(), get_sectors_unused(), and get_sectors_unallocated().
When calculating new usage figures during Paste and Resize/Move
operations directly access sectors_used, sectors_unused and
sectors_unallocated members.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
A number of file systems report intrinsic unallocated space even when
they are created filling the partition. As reported using their own
specific tools, they are: jfs, lvm2 pv and ntfs. Therefore when
resizing a partition estimate its minimum size to be used sectors plus
any unallocated sectors up to the significant amount.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
The btrfs programs only provide approximations of file system sizes
because they display figures using binary prefix multipliers to two
decimal places of precision. E.g. 2.00GB. For partition sizes where
the contained file system size rounds upwards, GParted will fail to read
the file system usage and report a warning because the file system will
appear to be larger than the partition.
For example, create a 2047 MiB partition containing a btrfs file system
and display its size.
# btrfs filesystem show
Label: none uuid: 92535375-5e76-4a70-896a-8d796a577993
Total devices 1 FS bytes used 28.00KB
devid 1 size 2.00GB used 240.62MB path /dev/sda12
The file system size appears to be 2048 MiB, but that is larger than the
partition, hence the issue GParted has. (Actually uses the btrfs devid
size which is the size of the btrfs file system within the partition in
question).
This issue is new with the fix for Bug #499202 because it queries the
file system sizes for the first time. The same issue could
theoretically occur previously, but with the used figure (FS bytes
used). This would have been virtually impossible to trigger because
btrfs file system would have to have been greater than 99% full, but
btrfs has been notorious for early reporting of file system full.
The fix is that if a btrfs file system size appears larger than the
partition size, but the minimum possible size which could have been
rounded to the reported figure is within the partition size use the
smaller partition size instead. Apply the method to the used figure
too, in case the file system is 100% full. Also if the btrfs file
system size appears smaller than the partition size, but the maximum
possible size which could have been rounded to the reported figure is
within the partition size use the larger partition size instead to avoid
reporting, presumably false, unallocated space. Not applied to file
system used figure.
Bug 499202 - gparted does not see the difference if partition size
differs from filesystem size
When pasting a copied partition into free space or move/resizing a
partition set its space utilisation so that any unallocated space within
the partition is displayed correctly before the operation is applied.
NOTE:
If the file system does not support file system resizing the Paste and
Move/Resize dialogs don't allow resizing the partition so the preview
will always be correct, unlike the case in the previous patch:
Set unallocated space when performing simple operations (#499202)
Also remove the deprecated and no longer used Partition::Set_Unused()
and Partition::set_used() methods.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Display the unallocated space within a partition in the main window's
graphical disk representation.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Add reporting of the LVM2 Physical Volume size allowing the unallocated
space in the partition to be calculated.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Update file system specific implementations to set the size and free
space, thus allowing the unallocated space in the partition to be
calculated, for the following unmounted file systems:
btrfs, ext2, ext3, ext4, fat16, fat32, jfs, nilfs2, ntfs, reiserfs,
reiser4, xfs
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Display the unallocated space in the graphical partition representation
and numeric figures in the Partition Information dialog.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
Currently GParted assumes that a file system fills its containing
partition. This is not always true and can occur when resizing is
performed outside of GParted or a resize operation fails. GParted
doesn't display any information about unallocated space to the user
and in most cases it is simply included in used space.
Add partition unallocated space accounting. Make GParted record the
unallocated space for mounted file system and display a warning in the
Partition Information dialog when too much unallocated space is found.
Partition::set_sector_usage( fs_size, fs_unused ), is the new preferred
method of recording file system usage because it allows the unallocated
space in a partition to be calculated. Partition::Set_Unused() and
Partition::set_used() are now deprecated.
NOTES:
1) Set the minimum unallocated space to be 5% before considering it
significant to avoid false reporting. Worst case found was a
mounted xfs file system in a 100MiB partition, which reports as
~4.7% unallocated according to file system size from statvfs().
However, it reports as having no unallocated space using xfs
specific tools.
2) Unallocated space is only a graphical representation for the user.
GParted must still use relevant tools to resize file systems before
shrinking the data and can't assume all unallocated space exists
after the file system at the end of the partition.
Bug #499202 - gparted does not see the difference if partition size
differs from filesystem size
The parted-3.1 release brings back FAT16/FAT32 and HFS/HFS+ file
system resize capabilities in a new libparted fs resize library.
The following operations are again available when GParted is linked
with parted-3.1:
FAT16 - grow and shrink
FAT32 - grow and shrink
HFS - shrink
HFS+ - shrink
Note that there is a difference in how move actions are handled for
FAT16/FAT32 file systems based on parted version.
When GParted is linked with parted >= 3.0:
FAT16 - move performed internally by GParted
FAT32 - move performed internally by GParted
When GParted is linked with parted < 3.0:
FAT16 - move performed by libparted
FAT32 - move performed by libparted
Thanks goes to Jim Meyering for restoring these file system resizing
capabilities in Parted 3.1 with a new libparted fs resize library.
Closes Bug #668281 - minimal file-system resize API? (FAT and HFS*
only)
Also update to use LVM terminology, such that a Physical Volume is
referred to as a member of a Volume Group. Status of an LVM2 PV is now
displayed using one of the following messages:
Not active (Not a member of any volume group)
VGNAME not active
VGNAME not active and exported
VGNAME active
Bug #160787 - lvm support
GParted would crash if there were any embeded spaces in the output from
the command used to query LVM2 PVs. There aren't normally any embeded
spaces, but they can occur in certain degrated situations. For example
if one of the PVs in a VG spanning two PVs is lost the PV is displayed
as "unknown device" rather than its actual device name:
# lvm pvs --nosuffix --units b --separator , -o pv_name,pv_free,vg_name,lv_name,lv_attr
Couldn't find device with uuid DMEi8r-9Vvy-w0Ok-CSSn-oLmY-YrY3-1PBznz.
PV,PFree,VG,LV,Attr
/dev/sda11,2143289344,GParted-VG1,,
unknown device,1619001344,GParted-VG1,lvol0,-wi---
unknown device,1619001344,GParted-VG1,,
This was loaded into the cache as:
["/dev/sda11,2143289344,GParted-VG1,,",
"unknown",
"device,1619001344,GParted-VG1,lvol0,-wi---",
"unknown",
"device,1619001344,GParted-VG1,,"]
The crash would happen when trying to access the VG name or LV flags on
a line without enough comma separated fields.
Improve parsing of the output from "lvm pvs" so that lines are not split
on embeded spaces. Don't crash on lines without without enough comma
separated fields.
Bug #160787 - lvm support
Previously any errors which occurred when running LVM commands used to
load the LVM2_PV_Info cache were simply ignored and the cache wasn't
loaded. This lead to missing information about LVM2 PVs, but the user
had no indication as to why.
Now when any errors occur the command ran and all output is captured.
This is displayed to the user, along with a suitable warning message, in
the Partition Information dialog.
Bug #160787 - lvm support
Create function Utils::kernel_version_at_least() to check that the
current Linux kernel is a particular version or higher.
Update nilfs2 to use this function to determine whether the kernel is
new enough to support file system resizing.
Previously used "dmsetup info" to directly list device-mapper mapping
names in the kernel to identify active Logical Volumes. However GParted
failed to recognise active LVs if the VGNAME contains any hyphens (-).
This is because LVM encodes hyphens as double hyphens in the mapping
name.
To avoid having to duplicate the LVM hyphen encoding in GParted, switch
to using "lvm lvs" to list LVs.
# dmsetup info --columns --noheadings --separator , -o name
GParted_VG1-lvol_00
GParted--VG2-lvol--00
# lvm lvs --noheadings --separator , -o lv_name,vg_name,lv_attr
lvol_00,GParted_VG1,-wi-a-
lvol-00,GParted-VG2,-wi-a-
lvol-01,GParted-VG3,-wi---
.^.
(-) not active, (a) or any other character considered active. Reference
lvs(8).
Bug #160787 - lvm support
As the Mount Point column is being borrowed to display the PV's VGNAME,
also suppress generation of the "Mount on" submenu for LVM2 PVs.
Bug #160787 - lvm support
Previously when GParted was started LVM2_PV_Info cache was loaded twice,
executing LVM2 PV querying commands twice. Firstly when
lvm2_pv::get_filesystem_support() was checking if LVM2 PV support was
available, and secondly when forced by a refresh in
GParted_Core::set_devices().
Implement lazy initialization. Only load the cache when forced by the
above mentioned refresh or having to return a value when the cache is
not yet loaded. Do not initialize the cache when just checking if LVM2
PV support is available.
Bug #160787 - lvm support
Cache results from querying all LVM2 PVs in one go to minimise the
number of times lvm commands are executed. Take inspiration from
caching performed by FS_Info and Proc_Partitions_Info.
Bug #160787 - lvm support
Add minimal support for just reporting the space usage of LVM2 PVs.
Accept libparted / blkid detection of LVM2 PVs first, falling back on
GParted's specific detection code otherwise. Maintain LVM not supported
warning message.
Bug #160787 - lvm support
This is the first step of adding support for just LVM2 Phyiscal Volumes,
a subset of full LVM2 support.
Make it clear that it is only LVM2 PVs being treated like a file system.
Bug #160787 - lvm support
Add the ability to set a new random UUID on file systems that provide
the appropriate tools to perform this action.
Update the help manual to include this new functionality. Also add
reference links to "setting a partition label" and "changing a
partition UUID" in the "copying and pasting a partition" section.
This patch does not include setting the UUID on an NTFS file system.
Bug #667278 - Add support for setting UUID
Bug #608308 - fix documentation - Copying and Pasting a Partition
There is a lot of commonality and code repetition for resizing of file
systems which can only be resized while mounted. Resizing of btrfs, jfs
and xfs all follow the pattern: mkdir, mount, resize, umount and rmdir.
Copying an xfs file system also uses a similar pattern, but for the
source and destination xfs file systems simultaneously.
Add three helper functions to the FileSystem class which implement
common tasks, allowing mounted file system resizing to be implemented
more simply.
Also add a function to the Utils class which checks whether the kernel
supports a file system. It handles the case of non-loaded modules,
which currently leads to reporting the growing of jfs and xfs as
unsupported.
We used to just log libparted exceptions without handling them. This patch
changes the exception handler to display a modal dialog box and return the
chosen action to libparted.
Requires libparted 2.4 or higher, or blkid from utils-linux 2.20 or
higher for nilfs2 file system detection.
Requires nilfs-utils for nilfs2 file system support.
Closes Bug #642842 - nilfs is not detected
When a new operation is added to operations list, check if a merge
is possible depending on the operation type:
OPERATION_RESIZE_MOVE: 2 consecutive "resize" operations on the
same partition
OPERATION_LABEL_PARTITION: 2 "label change" operations (need not be
consecutive) on the same partition
OPERATION_CHECK: 2 "check" operations (need not be
consecutive) on the same partition
OPERATION_FORMAT: 2 consecutive "format" operations on the
same partition
Closes Bug #438573 - Cancel out overlapping actions
Also fix a bug when copying partition using the Partition::Set(...)
method. This method did not initialize "sectors_used" and
"sectors_unused" members.
Some classes contained private attributes which were used only by a single
member function. Such items were moved to the corresponding function implementations
to stress their limited usage scope.
A few unused variables were also deleted.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
The release of (lib)parted 3.0 includes a change to the Application
Programing Interface - API. Most importantly, libparted 3.0 removes
many file system specific function calls, and hence the capabilities
provided by these functions. In order for GParted to compile and link
with libparted 3.0, this libparted functionality is lost.
Specifically, the functionality that is lost when GParted is compiled
and linked with libparted 3.0 is as follows:
- Loss of ability to grow and shrink FAT16 and FAT32 file systems
- Loss of ability to shrink HFS and HFS+ file systems
- Loss of ability to determine used and unused sectors in HFS and
HFS+ file systems
- Loss of ability to erase file system signatures on partition
create and format
It is hoped that other free software projects will include some or all
of the above lost functionality, which can then be added back to
GParted.
This commit includes a change in how FAT16 and FAT32 file systems are
moved. Specifically the move is now performed internally by GParted
when linked with libparted 3.0. The move functionality is provided by
libparted for prior libparted versions (e.g. less than 3.0).
This is the final enhancement in a series of commits that enable
GParted to compile with libparted version 3.0.
Closes Bug #651559 - Doesn't compile against parted 3.0
Usage of the kpartx package to create partition names has been
completely removed. Hence kpartx is no longer even an optionally used
package by gparted.
This change is related to the following bug report:
Ubuntu launchpad bug 719129 - [Natty] Gparted duplicates dmraid
partition devices
https://bugs.launchpad.net/ubuntu/+source/gparted/+bug/719129
The reason for refactoring is to simplify the large GParted_Core
class, to help minimize disk reads, and to group the logic for
processing the file /proc/partitions into a single logical class.
This reason for refactoring is to simplify the large GParted_Core
class, to help minimize disk reads, and to group the logic for
processing the file /proc/partitions into a single logical class.
This adds initial handlers for Btrfs; only .create, .check and
.read_label are done for now, via external btrfs-tools.
Other methods are still only stubs.
Newer versions (dmraid-1.0.0-rc16?) of dmraid default to always
creating partition names by inserting the letter 'p' between the
device name and the partition number. Since this is not
consistent with older versions of dmraid, add extra logic to
ensure that newer versions of dmraid do not insert this extra
letter 'p'.
Rename method get_udev_name to get_udev_dm_name and enhance to
retrieve the property DM_NAME.
Handle situation where parted, and hence libparted, has been
configured with --disable-device-mapper. In this situation on
some distros the device name could be /dev/dm-0. This results in
invalid partition names such as /dev/dm-0p1. Add logic to decode
the actual /dev/mapper name.
Make align to MiB the default setting instead of align to cylinder.
Migrate logic for alignment to cylinder into its own method
snap_to_cylinder, and place common logic in snap_to_alignment.
Add alignment checks for situations where space is needed for Master
Boot Record or Extended Boot Record.
Adjust ranges on spin buttons according to required boot record space.
Copy fix for off by one sector (#596552) from
Dialog_Partition_New::Get_New_Partition to
Dialog_Base_Partition::Get_New_Partition
Enhance resize / move logic for checking locations of nearby logical
partitions to not depend on the partition ordering.
Note: This commit does not include limiting graphic movement according
to required boot record space.
Also add signal handler to alignment menu to update file system
minimum size.
This enhancement is to prepare for adding a third alignment
option to align to MiB.
With the removal of the 512 byte constants, such as MEBIBYTE, it
was possible to rename the _FACTOR constants back to BYTE
constants. The _FACTOR constants, such as MEBI_FACTOR, were a
temporary measure to help in the transition to support devices
with sector sizes > 512 bytes.
The device sector size is needed in all calculations that convert
between sectors and bytes. The device sector_size is included in
the partition object because this object is used to contain
operation information in addition to actual partitions and
unallocated space. A second option was considered to pass the
device object to many methods, but this was considered a much
larger task that might not provide significant gains in
maintainability.
According to parted documentation, only "msdos" and "dvh" disk
types (or partition table types) support extended partitions.
All other disk types support primary partitions only.
Remove commented code and boolean use-C-lang parameter for
Utils::num_to_str() method because this bug was fixed in
gcc-4.0.3. The GNU gcc compiler versions 4 and up are now
commonly in use. Also due to previous partial commenting and
removal of the code, the code was non-functional
Thanks goes to Jan Claeys for pointing out this clean up
opportunity.
Restore copyright entries by original author to those of his last
known repository commit titled "released gparted-0.3.4 on
LarryT's request." on Feb 25, 2007.
Add my own copyright entries for files in which I changed source
code. Files in which I only made spelling changes do not have my
copyright entry added.
Auto detection of Linux software RAID devices was lost in GParted
0.3.8. This was because device scanning by the libparted device
call ped_device_probe_all() was replaced with custom code within
GParted to scan /proc/partitions for devices.
The reason the libparted call was replaced was due to a long
scanning problem with ped_device_probe_all(), a non-existent
physical floppy device, and a BIOS setting indicating a floppy
drive existed. See bug #351753:
https://bugzilla.gnome.org/show_bug.cgi?id=351753
Improve the feedback to the user when creating or pasting a
partition on a device with no partition table found.
Prior to this enhancement if a user tried to create or paste a
partition onto a device with no partition table found, GParted
would present the user with a Create Partition Table dialog.
When creating a new partition this could cause confusion for
users who were trying to format the disk. The user could
mistakenly believe the choice of an MS-DOS file system was being
presented.
Similarly on a paste operation it could be confusing to be
presented with a dialog to create a partition table without any
explanation of why a partition table was suddenly required in the
midst of the paste operation.
Neither the new partition creation, nor the partition paste
actions were performed after the Create Partition Table dialog
was displayed.
It appears that different dmraid versions handle specifying a
single dmraid device differently.
dmraid-1.0.0.rc14 uses a partial name only,
such as "isw" or "isw_cjbdddajhi".
dmriad-1.0.0.rc15 uses a full name only,
such as "isw_cjbdddajhi_Vol0".
To maintain compatibility with the broadest range of dmraid versions,
the ability to specify a single dmraid device is being removed.
Mike Fleetwood