Preview of the format operation cleared the partition name, yet when
applied, the partition name reappeared. Fix the preview to reflect
reality.
Bug 746214 - Partition naming enhancements
Previously partition naming had only been implemented for gpt. Make the
code ready to support naming of the other partition table types for
which libparted supports naming. Specifically: amiga, dvh, mac and
pc98 in addition to gpt. Document issues found with some of these
partition table types, which can relatively easily been worked around.
Leave support of naming for partition table types other than gpt
disabled, mostly just to reduce ongoing testing effort, at least until
there is any user demand for it.
Bug 746214 - Partition naming enhancements
Allow partition names to be changed whether or not the partition is
busy, rather than only when not busy, because it doesn't effect the busy
file system or change the partition boundaries in any way.
Bug 746214 - Partition naming enhancements
Attempting to create a new partition on a pc98 partition table fails
with the following libparted error:
The flag 'lvm' is not available for pc98 disk labels.
This has been broken since LVM2 Physical Volume read-write support was
first added in this commit:
c3ab62591b
Add creation of LVM2 PVs (#670171)
Fix by only clearing and setting the lvm partition flag when the type of
the partition table supports it. When creating a partition to contain
an LVM2 PV and the lvm flag is not support add the following message to
the operation results to explain that setting the lvm partition flag was
skipped and why:
Skip setting unsupported partition flag: lvm
Bug 746204 - Creating partitions on pc98 table fails with lvm flag not
available
Refactor GParted_Core::set_partition_type().
1) Set lp_partition variable earlier and use a single if lp_partition
set condition, rather than in both if conditions for the normal file
system case and the LVM2 Physical Volume case.
2) Stop calling Utils::get_filesystem_string() multiple times, instead
save the result in a local variable.
Tidies the code a little and reorders it in preparation for the
following fix to only set the lvm partition flag when support, making
that code change simpler.
Bug 746204 - Creating partitions on pc98 table fails with lvm flag not
available
In order to prevent potential corruption of newly created file systems,
when available use udisks2-inhibit with gpartedbin execution to prevent
automounting.
Original report:
Xubuntu install fail due partition auto mount defeats Gparted
https://bugs.launchpad.net/ubuntu/+source/thunar/+bug/1078445
Some GNU/Linux distributions use the udisks2 "udisksd" daemon and have
udisks2-inhibit at a known location. The known location is not in the
default PATH environment variable.
One known distribution that matches this criteria is xubuntu 14.04.
Interestingly neither kubuntu 14.04 nor ubuntu 14.04 appear to have the
udisks2 "udisksd" daemon running and do not suffer from this specific
automounting problem.
Bug 745349 - gparted wrapper script needs updated for udisks2
GParted now recognizes file system formats on disk devices without
partition tables. Update the manual with:
- how to format a disk device without a partition table
- manage flags not available for devices without partition tables
- use format to cleared to delete a file system from an unpartitioned
disk
Bug 743181 - Add unpartitioned drive read-write support
resize_move() and move() stopped using the device parameter in this
commit from 2006-07-23:
d663c3c277
removed cylindersize buffering during resize from the filesystems. It is
create() stopped using the device parameter in this commit from 2006-03-19:
ad9f2126e7
fixed issues with copying (see also #335004) cleanups + added FIXME added
For reference most other operation methods had the device parameter
removed in this earlier commit from 2005-12-07:
642f0a145b
from now on each partition has a reference to it's device. make use of new
When the following conditions were met GParted would fail to recognise a
newly created whole disk device file system, and instead show an unknown
file system filling the disk:
1) Disk was previously partitioned and contained at least one partition.
2) Using libparted version 2.0 to 3.0 inclusive.
Initial status:
# blkid | fgrep sdc
# fgrep sdc /proc/partitions
8 32 976762584 sdc
8 33 104857600 sdc1
# parted /dev/sdc
GNU Parted 2.4
Using /dev/sdc
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: ATA ST1000LM024 HN-M (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: msdos
Number Start End Size Type File system Flags
1 1049kB 107GB 107GB primary
When creating the loop partition table libparted would not inform the
kernel to delete the old partitions. /proc/partitions still contained
the details of the old partitions.
(parted) mktable loop
Warning: The existing disk label on /dev/sdc will be destroyed and
all data on this disk will be lost. Do you want to continue?
Yes/No? Yes
(parted) print
Model: ATA ST1000LM024 HN-M (scsi)
Disk /dev/sdc: 1000GB
Sector size (logical/physical): 512B/4096B
Partition Table: loop
Number Start End Size File system Flags
(parted) quit
# fgrep sdc /proc/partitions
8 32 976762584 sdc
8 33 104857600 sdc1
Creation of the whole disk device file system goes unnoticed by blkid
because the kernel and therefore blkid's cache have stale partition
information.
# mkfs.xfs -f /dev/sdc
# blkid | fgrep sdc
NOTE:
On a Linux Software RAID array, as opposed to a hard disk, blkid does
notice creation of the whole disk device file system. However the
kernel still has old partition details.
This was fixed in libparted 3.1 by commit:
http://git.savannah.gnu.org/cgit/parted.git/commit/?id=f5c909c0cd50ed52a48dae6d35907dc08b137e88
libparted: remove has_partitions check to allow loopback partitions
Fix by deleting old partitions before creating the loop table when
compiled with a broken version of libparted. The GParted UI provides
no feedback while a new partition table is created, and with some
versions of GTK the UI become unresponsive too, so it is important to be
as fast as possible. Evaluated three different methods, deleting 15 and
22 MSDOS partitions on a physical 5400 RPM hard drive using libparted
2.4:
M1) Delete and commit one partition at a time.
Takes up to 24 seconds to delete 15 partitions. With 22 partitions
libparted always reports finding some of the partitions busy and
unable to inform the kernel about the modifications.
Too slow and doesn't work.
M2) Delete all partitions in one go and commit once.
Takes up to 1.4 seconds to delete either 15 or 22 partitions. Never
removes partitions 17 and higher from the kernel.
Doesn't work.
M3) Write GPT table (letting libparted delete any old partitions).
Takes up to 0.8 seconds to delete either 15 or 22 partitions.
Fast and works.
Use method 3 - write a GPT table thus using libparted code to inform the
kernel of the old partition deletions.
Bug 743181 - Add unpartitioned drive read-write support
Older versions of blkid don't correctly distinguish between FAT16 and
FAT32 file systems when overwriting one with the other. This effects
GParted too with these file systems on whole disk devices where only
blkid is used to recognise the contents. See previous fix for why only
blkid is used in this case:
Avoid whole disk FAT being detected as MSDOS partition table
(#743181)
Example:
# blkid -v
blkid from util-linux 2.20.1 (liblkid 2.20.0, 19-Oct-2011)
# mkdosfs -F16 -I /dev/md1
# blkid | fgrep md1
/dev/md1: SEC_TYPE="msdos" UUID="7C23-95D9" TYPE="vfat"
# mkdosfs -F32 -I /dev/md1
# blkid | fgrep md1
/dev/md1: SEC_TYPE="msdos" UUID="7F93-98F4" TYPE="vfat"
So blkid recognised the UUID changed but didn't remove the SEC_TYPE for
the FAT32 file system. See FS_Info::get_fs_type() as it uses this to
distinguish between FAT16 and FAT32. This is a caching update bug in
blkid, because telling blkid not to use the cache gets the right
results:
# blkid -c /dev/null | fgrep md1
/dev/md1: UUID="7F93-98F4" TYPE="vfat"
With testing determined that blkid from util-linux 2.23 and later are
not affected and earlier versions are affected. Mostly recently known
affected distribution is Ubuntu 14.04 LTS with util-linux 2.20.1.
The straight forward fix would be to instruct blkid to not use its cache
with 'blkid -c /dev/null'. But using blkid's cache is needed to prevent
blkid hanging for minutes when trying to access a non-existent floppy
drive when the BIOS is set incorrectly. See commit:
18f863151c
Fix long scan problem when BIOS floppy setting incorrect
Instead, when using an older affected version of blkid and when blkid
cache reports a vfat file system, run blkid again bypassing the cache.
The device is known to exist and contain a vfat file system, just not
whether it is a FAT16 or FAT32 file system, so can't be a non-existent
floppy device and won't hang.
Bug 743181 - Add unpartitioned drive read-write support
Libparted 1.9.0 to 2.3 inclusive, recognises whole disk device FAT file
systems as MSDOS partition tables. This causes GParted to do the same.
# dd if=/dev/zero bs=1M of=/dev/md4
# mkdosfs -F32 -v -I /dev/md4
# blkid /dev/md4
/dev/md4: UUID="53FE-31F2" TYPE="vfat"
# parted /dev/md4
GNU Parted 2.1
Using /dev/md4
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: Unknown (unknown)
Disk /dev/md4: 536MB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
(parted) quit
# /tmp/parted24/bin/parted /dev/md4
GNU Parted 2.4
Welcome to GNU Parted! Type 'help' to view a list of commands.
(parted) print
Model: Linux Software RAID Array (md)
Disk /dev/md4: 536MB
Sector size (logical/physical): 512B/512B
Partition Table: loop
Number Start End Size File system Flags
1 0.00B 536MB 536MB fat32
(parted) quit
This was fixed in libparted 2.4 by commit:
http://git.savannah.gnu.org/cgit/parted.git/commit/?id=616a2a1659d89ff90f9834016a451da8722df509
libparted: avoid regression when processing a whole-disk FAT partition
Make GParted immune to this bug by moving blkid performed whole disk
device file system detection before libparted partition detection. Also
have to always erase old file system signatures on whole disk devices
when creating new partition tables to ensure that blkid doesn't detect
those old signatures before libparted has a chance to detect the new
partition table.
Bug 743181 - Add unpartitioned drive read-write support
When writing "loop" partition table over the top of some whole disk
device file system types GParted continued to show those whole disk
device file systems rather than the virtual unknown partition from the
"loop" partition table.
This affected btrfs, jfs, reiser4 and reiserfs. It occurred because of
several factors:
1) Libparted only zeroed the first and last 9.5 KiB (assuming 512 byte
sectors) of the device before writing a new partition table. See
ped_disk_clobber().
2) These file systems have their super blocks and therefore signatures
after the first 9.5 KiB.
3) Whole disk device file system detection is performed using blkid
before checking for a libparted "loop" partition table. See
GParted_Core::set_devices_thread().
Ref:
libparted 3.2: disk.c:ped_disk_clobber()
http://git.savannah.gnu.org/cgit/parted.git/tree/libparted/disk.c?id=v3.2#n302
Fix by always erasing any possible file system signatures on the device
before creating a new "loop" partition table.
NOTE:
This is typically taking up to 0.5 seconds in my testing on a 5400 RPM
hard drive, during which time the GParted UI is hung and the create
partition table dialog shows the apply button pressed but no other
progress indication.
Bug 743181 - Add unpartitioned drive read-write support
Creating a new partition table was getting libparted to read any
existing partition table before creating a new partition table on the
device. This is an unnecessary step, and if the device didn't already
contain a partition table also printed this error from libparted:
/dev/sdb: unrecognised disk label
Since get_device_and_disk() has been split into two, just call
get_device() instead to just populate the PedDevice object representing
the disk device. Removes a small unnecessary step.
Bug 743181 - Add unpartitioned drive read-write support
The preview of clearing a whole disk device file system was previewing
the same as formatting to all other file system types; as a cleared file
system spanning the whole disk device. However when implemented this
removes all signatures on the disk so it actually becomes an unallocated
and unpartitioned device. Make the preview match what happens in when
implemented.
GParted previously used mydevice.max_prims = -1 to represent an
unpartitioned device. It is now represented as:
mydevice.max_prims = 1
mydevice.disktype = _("unrecognized")
mydevice.partitions[0].type = TYPE_UNALLOCATED
mydevice.partitions[0].whole_device = true
mydevice.partitions[0].filesystem = FS_UNALLOCATED
and the check for an unpartitioned device in Win_GParted.cc becomes:
partitions[0].type == TYPE_UNALLOCATED && partitions[0].whole_device
Bug 743181 - Add unpartitioned drive read-write support
Previously GParted displayed a device containing the parted "loop"
partition table signature "GNU Parted Loopback 0" and nothing else, as
an unrecognised device.
Now make GParted display this as a virtual whole disk device partition
with unknown contents, complete with the unable to detect a file system
warning. This change then allows a whole disk device file system to be
created with the following two steps:
1) Create "loop" partition table on a device;
2) Format to required file system.
GParted represents a whole disk device file system as:
mydevice.max_prims = 1
mydevice.disktype = "none"
mydevice.partitions[0].type = TYPE_PRIMARY
mydevice.partitions[0].whole_device = true
mydevice.partitions[0].filesystem = FS_EXT4 (example)
Now represents just Parted's "loop" signature as:
mydevice.max_prims = 1
mydevice.disktype = "loop"
mydevice.partitions[0].type = TYPE_PRIMARY
mydevice.partitions[0].whole_device = true
mydevice.partitions[0].filesystem = FS_UNKNOWN
And as before, an unpartitioned device as:
mydevice.max_prims = -1
mydevice.disktype = _("unrecognized")
mydevice.partitions[0].type = TYPE_UNALLOCATED
mydevice.partitions[0].whole_device = true
mydevice.partitions[0].filesystem = FS_UNALLOCATED
Bug 743181 - Add unpartitioned drive read-write support
Only allow resizing, not moving of a whole disk device file system.
There is no actual partition to move and moving a file system away from
the start of a disk only makes it unrecognisable.
Also don't perform the partition resize step as there's no actual
partition to be resized. Only the file system is being resized.
(Libparted actually allows the virtual partition spanning a whole disk
device to be resized, implementing it as a no-operation, but only for
recognised file systems. For unrecognised file systems it fails with
"unrecognised disk label").
Note that the existing resize dialog was designed for resizing partition
boundaries, and their contained file systems, not for resizing file
systems within a fixed boundary. The difference is noticeable when
there is unallocated space because the file system doesn't fill the
whole disk device. The dialog starts resizing a virtual partition the
size of the whole disk device, not the actual size of the file system.
Leave addressing this for a possible future update.
Bug 743181 - Add unpartitioned drive read-write support
First, copying into a whole disk device fails on the set partition type
step. Fails with either libparted error "The flag 'lvm' is not
available for loop disk labels" or "unrecognised disk label" depending
whether libparted recognised the content and created a virtual partition
or not. (This is with libparted 2.4).
Fix by just skipping setting the partition type on whole disk devices.
Second, if any file system specific tools are used during the copy, they
will fail because they are passed the device name as "copy of /dev/SRC"
instead of "/dev/DST". Occurs when either the destination whole disk
device is not an identical size to the source so the file system check
and grow steps are added, or when file system specific tools are used to
copy the file system as with XFS or recent EXT2/3/4 tools.
Fix by re-adding the real partition path from libparted for whole disk
devices, as is already done for partitioned device names in
GParted_Core::calibrate_partition().
Bug 743181 - Add unpartitioned drive read-write support
Creation of reiserfs file system fails in GParted with the this error.
# mkreiserfs -f --label "" /dev/sdb < /dev/null
mkreiserfs 3.6.24
/dev/sdb is entire device, not just one partition!
Continue (y/n):
# echo $?
1
Add second force flag, -f, to the mkreiserfs command to make it work.
Bug 743181 - Add unpartitioned drive read-write support
Creation of ext2/3/4 and ntfs file systems fails in GParted on whole
disk devices with these errors.
# mkfs.ext4 -L "" /dev/sdb < /dev/null
mke2fs 1.42.9 (4-Feb-2014)
/dev/sdb is entire device, not just one partition!
Proceed anyway? (y,n)
# echo $?
1
# mkntfs -Q -v -L "" /dev/sdc
/dev/sdc is entire device, not just one partition.
Refusing to make a filesystem here!
# echo $?
1
Add force flag, -F, to both mkfs commands to make them work.
Bug 683643 - Doesn't properly support partitionless drives.
Formatting a whole disk device fails on the set partition type step with
libparted error "unrecognised disk label". This is because the previous
step just cleared the old file system signatures leaving libparted with
nothing to recognise. Therefore libparted doesn't present a virtual
"loop" partition table.
As there is no partition table, there's no partition and no partition
type. Just skip setting the partition type on whole disk devices.
Bug 743181 - Add unpartitioned drive read-write support
This enables Format to Cleared operation to succeed on whole disk device
file systems even when libparted doesn't recognise the file system.
(Turns out that making calibrate work in the previous commit happened to
make Format to Cleared operation succeed, but only if libparted
recognised the file system on the whole disk device).
Bug 743181 - Add unpartitioned drive read-write support
In the operational results of the calibrate step include the type of the
path GParted is working with, either partition or whole disk device. Do
the same for the create empty partition step too for consistency, even
though it only ever creates partitions. Looks like:
create empty partition
path: /dev/sdb3 (partition)
start: 2099200
end: 4196351
size: 2097152 (1.00 GiB)
calibrate /dev/sdc
path: /dev/sdc (device)
start: 0
end: 1953525167
size: 1953525168 (931.51 GiB)
Makes it explicit to the users what GParted has detected. Helps the
developers when looking at saved results to understand what decisions
were made and why specific steps were performed or not.
Bug 743181 - Add unpartitioned drive read-write support
This enables the Check, Label and New UUID operations to succeed on
whole disk device file systems even when libparted doesn't recognise the
file system.
This benefits reiser4 and lvm2 pv file systems with all versions of
libparted, current version is 3.2, and for nilfs2 with libparted < 2.4.
Bug 743181 - Add unpartitioned drive read-write support
get_device_and_disk() basically calls libparted to get a PedDevice
object representing a disk device and a PedDisk object representing a
partition table. Re-implement get_device_and_disk() using two separate
functions, get_device() and get_disk(), to get one of these objects
each.
No functionality changes with this commit. It enables future commits to
incrementally add support for whole disk devices into GParted without
needing libparted to recognise the contents and create a virtual "loop"
partition table.
Bug 743181 - Add unpartitioned drive read-write support
Enable operations on whole disk devices containing any recognised file
system.
The new partition operation on an empty whole disk device continues to
display the "No partition table found on device /dev/DEVICE" information
dialog.
Specifically unsupported operations:
* Delete -
Deletion of a partition only involves removal of the entry in the
partition table leaving the file system intact on the disk. However
this doesn't work for a whole disk device file system. Instead the
file system signatures would have to be erased which is much more
destructive and virtually impossible to undo. Therefore don't
implement whole disk device file system deletion. Alternatives are
to format the file system to cleared or create a partition table on
the device. Both of these imply overwriting the existing data and
set the expectation that undo is not possible.
* Manage flags -
There's no partition table, so there's no partition, so there's no
flags.
Resize/Move operation is being supported so that a whole disk device
file system can be resized to handle devices which can be resize, such
as those from SANs or Linux Software RAID arrays. The start of the file
system must remain fixed so move won't be allowed.
So far only simple operations work if they don't need libparted support
at all [1], or only need libparted support for the calibrate step AND
the file system on the whole disk device is recognised by libparted [2].
(Needs libparted to provide a "loop" partition, hence the recognition
requirement, so that the calibrate step can successfully read the
virtual "loop" partition table. Doesn't matter whether it's an old
version of libparted and it gets the name of the device wrong as GParted
is already using the whole disk device name anyway).
[1] Operations not needing any libparted support:
Mount on, Unmount, Swapon, Swapoff, Activate and Deactivate
[2] Operations only needing libparted support for the calibrate step:
Check, Label, New UUID
Bug 743181 - Add unpartitioned drive read-write support
Need to be able to take different actions in the GParted_Core partition
manipulation methods and in Win_GParted UI methods to deal with
libparted supported partitions or whole disk devices without a partition
table. Add boolean whole_device to the partition object and set
appropriately to allow for this.
Bug 743181 - Add unpartitioned drive read-write support
As was done with a failed mount operation, include the failed activate/
deactivate command in the error dialog. Two example error dialogs now
look like this:
(-) Could not deactivate swap
# swapoff -v /dev/sdb7
swapoff: /dev/sdb7: swapoff failed: Invalid argument
[ OK ]
(-) Could not unmount /dev/sdb6
# umount -v "/mnt/6"
umount: /mnt/6: not mounted
[ OK ]
On RHEL/CentOS 6, GParted fails to mount nilfs2 file system like this:
# mkfs.nilfs2 /dev/sdb1
# mount /dev/sdb1 /mnt/1
mount: you must specify the filesystem type
This fails because mount internally uses libblkid to determine the file
system type when it is not specified on the command line. However on
RHEL/CentOS 6 libblkid is too old to recognise nilfs2.
GParted used libparted recognition first and blkid second. Mount only
uses libblkid. When there are multiple signatures on a partition
GParted may report a different result to blkid alone. Therefore fix by
first trying to mount the file system without specifying the type, as is
already done, and if that fails, trying specifying the file system type.
This allows GParted to mount nilfs2 file systems.
# mount -t nilfs2 /dev/sdb1 /mnt/1
# mount | fgrep sdb1
/dev/sdb1 on /mnt/1 type nilfs2 (rw,gcpid=30946)
And for unsupported file systems the error dialog from the failed mount
command shows both commands like this:
(-) Could not mount /dev/sdb3 on /mnt/3
# mount -v /dev/sdb3 "/mnt/3"
mount: unknown filesystem type 'reiser4'
# mount -v -t reiser4 /dev/sdb3 "/mnt/3"
mount: unknown filesystem type 'reiser4'
[ OK ]
Bug 742741 - Nilfs2 file system is unusable on RHEL/CentOS 6
Mike Fleetwood