PATCHSET OVERVIEW
A user had a Firmware / BIOS / ATARAID array of 2 devices configured as
a RAID 0 (stripe) set. On top of that was a GPT with the OS partitions.
GParted displays the following errors on initial load and subsequent
refresh:
Libparted Error
(-) Invalid argument during seek for read on /dev/sda
[ Retry ] [ Cancel ] [ Ignore ]
Libparted Error
(-) The backup GPT table is corrupt, but the
primary appears OK, so that will be used.
[ Ok ] [ Cancel ]
This is an Intel Software RAID array which stores metadata at the end of
each member device, and so the first 128 KiB stripe of the set is stored
in the first 128 KiB of the first member device /dev/sda which includes
the GPT for the whole RAID 0 device. Hence when libparted reads member
device /dev/sda it finds a GPT describing a block device twice it's
size and in results the above errors when trying to read the backup GPT.
A more dangerous scenario occurs when using 2 devices configured in an
Intel Software RAID 1 (mirrored) set with GPT on top. On refresh
GParted display this error for both members, /dev/sda and /dev/sdb:
Libparted Warning
/!\ Not all of the space available to /dev/sda appears to be used,
you can fix the GPT to use all of the space (an extra 9554
blocks) or continue with the current setting?
[ Fix ] [ Ignore ]
Selecting [Fix] gets libparted to re-write the backup GPT to the end of
the member device, overwriting the ISW metadata! Do that twice and both
copies of the metadata are gone!
Worked example of this more dangerous mirrored set case. Initial setup:
# dmraid -s
*** Group superset isw_caffbiaegi
--> Subset
name : isw_caffbiaegi_MyMirror
size : 16768000
stride : 128
type : mirror
status : ok
subsets: 0
devs : 2
spares : 0
# dmraid -r
/dev/sda: isw, "isw_caffbiaegi", GROUP, ok, 16777214 sectors, data@ 0
/dev/sdb: isw, "isw_caffbiaegi", GROUP, ok, 16777214 sectors, data@ 0
# wipefs /dev/sda
offset type
---------------------------------------------
0x200 gpt [partition table]
0x1fffffc00 isw_raid_member [raid]
Run GParted and click [Fix] on /dev/sda. Now the first member has gone:
# dmraid -s
*** Group superset isw_caffbiaegi
--> *Inconsistent* Subset
name : isw_caffbiaegi_MyMirror
size : 16768000
stride : 128
type : mirror
status : inconsistent
subsets: 0
devs : 1
spares : 0
# dmraid -r
/dev/sdb: isw, "isw_caffbiaegi", GROUP, ok, 16777214 sectors, data@ 0
# wipefs /dev/sda
offset type
---------------------------------------------
0x200 gpt [partition table]
Click [Fix] on /dev/sdb. Now all members of the array are gone:
# dmraid -s
no raid disks
# dmraid -r
no raid disks
# wipefs /dev/sdb
offset type
---------------------------------------------
0x200 gpt [partition table]
So GParted must not run libparted partition table scanning on the member
devices in ATARAID arrays. Only on the array device itself.
In terms of the UI GParted must show disks which are ATARAID members as
whole disk devices with ATARAID member content and detect array busy
status to avoid allowing active members from being overwritten while in
use.
THIS COMMIT
Recognise ATARAID member devices and display in GParted as whole device
"ataraid" file systems. Because they are recognised as whole device
content ("ataraid" file systems) this alone stops GParted running the
libparted partition table scanning and avoids the above errors.
The list of dmraid supported formats is matched by the signatures
recognised by blkid:
$ dmraid -l
asr : Adaptec HostRAID ASR (0,1,10)
ddf1 : SNIA DDF1 (0,1,4,5,linear)
hpt37x : Highpoint HPT37X (S,0,1,10,01)
hpt45x : Highpoint HPT45X (S,0,1,10)
isw : Intel Software RAID (0,1,5,01)
jmicron : JMicron ATARAID (S,0,1)
lsi : LSI Logic MegaRAID (0,1,10)
nvidia : NVidia RAID (S,0,1,10,5)
pdc : Promise FastTrack (S,0,1,10)
sil : Silicon Image(tm) Medley(tm) (0,1,10)
via : VIA Software RAID (S,0,1,10)
dos : DOS partitions on SW RAIDs
$ fgrep -h _raid_member util-linux/libblkid/src/superblocks/*.c
.name = "adaptec_raid_member",
.name = "ddf_raid_member",
.name = "hpt45x_raid_member",
.name = "hpt37x_raid_member",
.name = "isw_raid_member",
.name = "jmicron_raid_member",
.name = "linux_raid_member",
.name = "lsi_mega_raid_member",
.name = "nvidia_raid_member",
.name = "promise_fasttrack_raid_member",
.name = "silicon_medley_raid_member",
.name = "via_raid_member",
As they are all types of Firmware / BIOS / ATARAID arrays, report all
members as a single "ataraid" file system type. (Except for
"linux_raid_member" in the above blkid source listing which is Linux
Software RAID).
Closes#75 - Errors with GPT on RAID 0 ATARAID array
With the same case as from the previous commit, the very long "Mounted
on ..." text is now wrapped, but the text may not be left justified.
Slowly adjust the dialog width and see how the text wrapping is updated
to fit the size adjustment but the text is centred rather than left
justified.
This is because setting the halign property to Gtk::ALIGN_START does not
guarantee left alignment of text for wrapped or ellipsized Gtk::Labels.
Use the xalign property instead.
To set the xalign property there is a method in the GtkMisc (Gtk::Misc)
base class:
gtk_misc_set_alignment (Gtk::Misc::set_alignment)
However, GtkMisc (Gtk::Misc) was deprecated in Gtk 3.14 (Gtkmm 3.14)
and in Gtk 3.16 (gtkmm 3.16) set_alignment() was replaced with the
introduction of two new methods:
gtk_label_set_xalign (Gtk::Label::set_xalign)
gtk_label_set_yalign (Gtk::Label::set_yalign)
Add a check for Gtkmm method Gtk::Label::set_xalign() in configure.ac
and use it when available.
References:
[1] Gtk3 Reference Documentation - gtk_misc_set_alignment()
https://developer.gnome.org/gtk3/stable/GtkMisc.html#gtk-misc-set-alignment
"gtk_misc_set_alignment has been deprecated since version 3.14 and
should not be used in newly-written code. Use GtkWidget's alignment
("halign" and "valign") and margin properties or GtkLabel's
"xalign" and "yalign" properties."
[2] Gtkmm 3.16 Gtk::Misc Class Reference, set_alignment() method
https://developer.gnome.org/gtkmm/3.16/classGtk_1_1Misc.html#a52b2675874cf46a3097938756b9fe9e8
[3] GNOME BugZilla - EmptyBoxes: instructions_label's alignment is off
https://bugzilla.gnome.org/show_bug.cgi?id=735841
[4] Gtk commit from 2014-09-16:
GtkLabel: add x/yalign properties
https://gitlab.gnome.org/GNOME/gtk/commit/d39424fc
[5] Gtk3 Reference Documentation - gtk_label_set_xalign()
https://developer.gnome.org/gtk3/stable/GtkLabel.html#gtk-label-set-xalign
[6] Gtkmm 3.16 Gtk::Label Class Reference, set_xalign() method
https://developer.gnome.org/gtkmm/3.16/classGtk_1_1Label.html#acee7d4e87d7cc14080a7b8ded5f84e5eCloses!40 - Limit wrapping labels
Some icon themes only provide large icons for stock items. This can
cause problems like overly large icons appearing in the GParted UI.
Found on Kubuntu 16.04 LTS with default breeze icon theme.
Be compatible with these icon themes by forcing scaling of stock icons
to the requested size.
Icons are used either by Gtk::Image widgets, or Gtk::CellRendererPixbuf
objects for comboboxes/treeviews. For Gtk::Image widgets we add
Utils::mk_image() that constructs Gtk::Image widgets and then sets the
pixel-size property. For Gtk::CellRendererPixbuf we add
Utils::mk_pixbuf() that first loads a Gdk::Pixbuf and then scales if
needed.
Closes#39 - After GTK3 port icons are too big on KDE
Now that GParted requires Gtk3 there is no need to use floating point
numbers for compatibility with Gtk <= 2.22. Replace with symbolic
alignment constants.
Relevant commit history:
* 6efa623401
Add optional yalign argument to Utils::mk_label() method
* be2689ad25
Stop using deprecated widget alignment enumerators (#652044)
Now that we are compiling against Gtkmm3 there are missing declarations
of Glibmm identifiers due to changes in Gtkmm internal header structure.
All we have to do is bring back the declarations by including the
appropriate headers where needed.
Add necessary Glibmm header includes.
Closes#7 - Port to Gtk3
Just add detection of APFS using GParted's internal magic string
detection. It just matches 1 byte of the 2 byte object type and the
4 byte magic field found in the super block [1]. See code comment for
more details.
Blkid has just gained recognition of APFS with util-linux v2.33 released
06-Nov-2018 [2].
This will write enough for GParted's simple internal detection to find
APFS:
# python -c '
import sys
sys.stdout.write("\0"*24 + "\1\0" + "\0"*6 + "NXSB")
' > /dev/sdb1
[1] Apple File System Reference
https://developer.apple.com/support/apple-file-system/Apple-File-System-Reference.pdf
[2] [ANNOUNCE] util-linux v2.33
https://marc.info/?l=linux-fsdevel&m=154150400305928&w=2Closes#23 - GParted doesn't detect APFS (Apple File System)
There is no prospect of there being ufs-tools on Linux. The was a
project which did release ufs-tools version 0.1 in 2004, but has been
inactive since then.
http://ufs-linux.sourceforge.net/
Copying and moving is now implemented for file systems in the basic
supported category. Also mounting and unmounting of unsupported file
system and reporting their usage while mounted has been added. This is
all the support that GParted has ever implemented for UFS. Therefore
re-assign UFS as a basic supported file system as it looses no
functionality.
Closes!13 - Support copying and moving of unsupported partition content
Want a single term under which the supported actions for all basic
supported file systems are displayed in the File System Support dialog.
"Unknown" isn't the correct adjective because the group includes
unknown, but also includes: BitLocker, GRUB2 core image, ISO9660, Linux
SWRaid, Linux Suspend, REFS and ZFS. Add "other" file system type just
for displaying in the dialog.
Closes!13 - Support copying and moving of unsupported partition content
Introduce a third category of basic file system support to go along with
the existing full and none. Use the file system's entry in
FILESYSTEM_MAP to determine the level of support. See comment in
GParted_Core::init_filesystems() for details.
Add and remove FILESYSTEM_MAP NULL pointer entries as required, so that
only the file system types intended to have basic support have such
entries.
Closes!13 - Support copying and moving of unsupported partition content
PATCHSET OVERVIEW:
Forum user wanted to be able to move a partition with unknown content:
Topic: Can't move/rezise partition on android device (unknown format)
http://gparted-forum.surf4.info/viewtopic.php?id=17742
While GParted isn't going to be able to run any sort of file system
check on the unknown content there isn't any reason why such a partition
can't be copied or moved so long as the partition stays the same size.
GParted can just use it's existing internal block copy routine it uses
for copying and moving most partition content. This is no different to
a few of the already supported file system types which don't have a
check-repair tool: exfat, f2fs, nilfs2, udf, ufs.
This patchset introduces a third category called basic file system
support to go along with the existing full and unsupported categories.
Basic supported file systems will just use GParted's inbuilt
capabilities to perform actions so they won't need a derived FileSystem
implementation class. Unknown file systems along with all other
recognised, but otherwise unsupported, file systems will be assigned to
this new basic supported category.
THIS PATCH:
FS_UNKNOWN is used when GParted is unable to identify the contents of a
partition. FS_UNKNOWN is also used to generate a file system support
set with no supported actions, in the FileSystem::FS::FS() constructor
and in GParted_Core::get_fs().
As support for operations on partitions with unknown content is being
added, the second usage will be confusing or even wrong.
FS( FS_UNKNOWN ) constructs the no supported actions set, yet GParted
will support some actions for the FS_UNKNOWN file system type.
Therefore add FS_UNSUPPORTED for the second usage.
Closes!13 - Support copying and moving of unsupported partition content
Util-linux package, at least as far back as version 2.23.2 as found on
CentOS 7, provides the mkfs.minix and fsck.minix commands. Also blkid
from the same package, recognises minix file systems.
Create version 3 file systems because MINIX 3 [1] is the only supported
version and that reportedly uses version 3 of the file system [2].
[1] MINIX 3 / History
https://en.wikipedia.org/wiki/MINIX_3#History
[2] Regarding MINIX 3 file system
https://groups.google.com/forum/#!topic/minix3/3-TeHR_23X8
"MINIX 3 uses Minix File System (MFS). More precisely MFS V3."
Closes!12 - Add minix file system support
The CUSTOM_TEXT enumeration is exclusively used as the type of one of
the parameters to the functions get_generic_text() and get_custom_text()
in the FileSystem class and derived classes. The definition of the
enumeration therefore belongs in FileSystem.h. Move it.
As discussed in "LUKS password handling, threats and preventative
measures" [1] GParted must be able to pass LUKS passphrases to
cryptsetup via standard input to avoid having to write passwords to the
file system and deal with additional security requirements. Therefore
add a way to write input into created child processes. For small
amounts of input, writing up to the pipe buffer capacity won't block
[2]. This is 64K on versions of Linux in any currently supported
distributions.
[1] LUKS password handling, threats and preventative measures
https://bugzilla.gnome.org/show_bug.cgi?id=627701#c56
GParted must not become a password manage so it must never save
LUKS passwords to disk across separate invocations of GParted.
...
GParted should avoid writing a temporary file containing the LUKS
password as it introduces extra complexity with trying to safely
handle and erase file content. Instead GParted must
programmatically pass the LUKS password via standard input to the
cryptsetup command.
[2] pipe(7) manual page:
Pipe capacity
A pipe has a limited capacity. If the pipe is full, then a
write(2) will block or fail, depending on whether the O_NONBLOCK
flag is set (see below). ...
In Linux versions before 2.6.11, the capacity of a pipe was the
same as the system page size (e.g., 4096 bytes on i386). Since
Linux 2.6.11, the pipe capacity is 65536 bytes.
Bug 795617 - Implement opening and closing of LUKS mappings
Struct FS and struct FS_Limits are strongly related to the FileSystem
class, both being return values from members and associated with storing
file system attributes. Move their definitions from Utils.h into
FileSystem.h.
There are too many different types of things named "filesystem" in the
GParted code with the potential to cause confusion. Namely:
std::vector<FS> FILESYSTEMS
Vector of file system capabilities.
class FileSystem Base class interfacing to file system
specific executables for querying and
modification.
enum FILESYSTEM Symbolic constants representing each file
system type.
Many recent written or re-written functions already used a variable
named fstype. Rename enum FILESYSTEM to enum FSType to clearly
distinguish it from the other things with very similar names. Only
changing the name of the enumeration, not the name of variables of that
type too because that is a lot more lines of code and those can be
changed when the relevant code is re-written.
All the code has been switched to call get_filesystem_limits() and use
struct FS_Limits. Remove struct FS members .MIN & .MAX.
Bug 787204 - Minimum and maximum size of the UDF partition/disk
PATCH SET OVERVIEW:
Currently the supported actions of each file system and their size
limits are stored in struct FS objects. These are created by calling
file system specific derived implementations of
FileSystem::get_filesystem_support(). This happens when GParted is
started or when a when a rescan for supported actions is performed. The
file system size limits are expressed as a fixed number of bytes.
The maximum UDF file system size is specified in terms of file system
block size units. Also the file system block size must match the sector
size of the underlying device. Typically 2K for optical media and 512
bytes or 4K for hard drives.
Therefore GParted can't properly express the true UDF file system size
limits because they depend on the block size of an existing UDF file
system or the sector size of the device for new UDF file systems. In
fact other file systems such as EXT2/3/4 and XFS actually express their
maximum file system size in terms of numbers of file system blocks but
these tend to always be 4K and don't have to match the sector size of
the underlying device, so fixed byte values tend to suffice.
To update GParted for this, first separate file system size limits from
struct FS into struct FS_Limits and provide new
FileSystem::get_filesystem_limits() method to allow the limits to be
queried independently of the calls to get_filesystem_support().
Second, pass Partition objects and allow derived get_filesystem_limits()
implementations.
THIS PATCH:
Just creates a separate structure storing fixed value file system
minimum and maximum size limits along with getter method
get_filesystem_limits().
Bug 787204 - Minimum and maximum size of the UDF partition/disk
Add support for detecting UDF file systems and formatting hard disks
with revision 2.01 UDF file systems using udftools. Formatting optical
disks or any other media types is not supported yet. Changing label or
UUID after formatting is not supported as the tools do not yet exist.
Bug 784533 - Add support for UDF file system
Already have:
Utils::get_filesystem_string(FS_EXT2) -> "ext2"
virtual Partition::get_filesystem_string() -> "ext2"
virtual PartitionLUKS::get_filesystem_string() -> "[Encrypted] ext2"
Add these:
Utils::get_encrypted_string() -> "[Encrypted]"
Utils::get_filesystem_string(false, FS_EXT2) -> "ext2"
Utils::get_filesystem_string(true, FS_EXT2) -> "[Encrypted] ext2"
This is ready for use of Utils::get_filesystem_string(true, FS_EXT2)
when composing the preview of a format of an encrypted file system by
Win_GParted::activate_format().
Bug 774818 - Implement LUKS read-write actions NOT requiring a
passphrase
Requires blkid.
Note that FS_LUKS was also moved to more closely match the order in
include/Utils.h
Bug 771244 - gparted does not recognize the iso9660 file system in
cloned Ubuntu USB boot drives
It made the code look a little messy, is easily resolved in the build
system and made the dependencies more complicated than needed. Each
GParted header was tracked via multiple different names (different
numbers of "../include/" prefixes). For example just looking at how
DialogFeatures.o depends on Utils.h:
$ cd src
$ make DialogFeatures.o
$ egrep ' [^ ]*Utils.h' .deps/DialogFeatures.Po
../include/DialogFeatures.h ../include/../include/Utils.h \
../include/../include/../include/../include/../include/../include/Utils.h \
../include/../include/../include/Utils.h \
After removing "../include/" from the GParted header #includes, just
need to add "-I../include" to the compile command via the AM_CPPFLAGS in
src/Makefile.am. Now the dependencies on GParted header files are
tracked under a single name (with a single "../include/" prefix). Now
DialogFeatures.o only depends on a single name to Utils.h:
$ make DialogFeatures.o
$ egrep ' [^ ]*Utils.h' .deps/DialogFeatures.Po
../include/DialogFeatures.h ../include/Utils.h ../include/i18n.h \
Recognise GRUB2 core.img boot code written to a partition without a file
system. Such setups are possible/likely with GPT partitioned disks as
there is a specific partition type reserved for it [1][2]:
21686148-6449-6E6F-744E-656564454649 (BIOS Boot partition)
[1] GUID Partition Table, Partition types
https://en.wikipedia.org/wiki/GUID_Partition_Table#Partition_type_GUIDs
[2] BIOS boot partition
https://en.wikipedia.org/wiki/BIOS_boot_partition
Bug 766989 - zfsonline support - need file system name support for ZFS
type codes
Adapt the ext2 resize progress tracker to the new ProgressBar class.
Also update the progress function to track when text progress bars have
completely passed in the output so that the progress bar can be stopped
as well as started when needed.
Bug 760709 - Add progress bars to XFS and EXT2/3/4 file system specific
copy methods
Provide a minimal implementation of a luks file system class which only
does busy detection.
NOTE:
For now, read-only LUKS support, a LUKS partition will be busy when a
dm-crypt mapping exists. Later when read-write LUKS support is added
GParted will need to look at the busy status of the encrypted file
system within the open LUKS partition and map LUKS partition busy status
to encryption being open or closed.
Bug 760080 - Implement read-only LUKS support
Renamed from DEV_MAP_PATH to DEV_MAPPER_PATH. Moved so that the
constant is logically intended for use outside of the DMRaid class.
Also specifically make the string constant have external linkage, rather
than the default internal (static) linkage for constants, so that there
is only one copy of the variable in the program, rather than one copy in
each compilation unit which included DMRaid.h. Namely DMRaid.cc and
GParted_Core.cc.
References:
[1] Proper way to do const std::string in a header file?
http://stackoverflow.com/questions/10201880/proper-way-to-do-const-stdstring-in-a-header-file
[2] What is external linkage and internal linkage in C++
http://stackoverflow.com/questions/1358400/what-is-external-linkage-and-internal-linkage-in-c/1358796#1358796
Bug 760080 - Implement read-only LUKS support
The struct FS constructor initialised every member *except* filesystem
and busy. Then in *most* cases after declaring struct FS, assignments
followed like this:
FS fs;
fs.filesystem = FS_BTRFS;
fs.busy = FS::GPARTED;
But member busy wasn't always initialised.
Add initialisation of members filesystem and busy to the struct FS
constructor. Specify optional parameter to the constructor to set the
filesystem member, or when left off filesystem is initialised to
FS_UNKNOWN.
Add active attribute to the cache of SWRaid members. Move parsing of
/proc/mdstat to discover busy SWRaid members into the cache loading
code. New parsing code is a little different because it is finding all
members of active arrays rather than determining if a specific member is
active.
Bug 756829 - SWRaid member detection enhancements
Command exit status is a 1 byte value between 0 and 255. [1][2] However
at the Unix API level the value is encoded as documented in the
waitpid(2) manual page. This is true for the Glib API too. [3] This is
why, for example, the comment in ext2::check_repair() reported receiving
undocumented exit status 256. It was actually receiving exit status 1
encoded as per the waitpid(2) method.
Add shell style exit status decoding [2] to execution of all external
commands. Return value from Utils::execute_command() and
FileSystem::execute_command() functions are now:
0 - 125 - Exit status from the command
126 - Error executing the command
127 - Command not found
128+N - Command terminated by signal N
255 - Unexpected waitpid(2) condition
Also adjust checking of the returned statuses as necessary.
[1] Advanced Bash-Scripting Guide: Appendix D. Exit Codes With Special
Meanings
http://www.linuxtopia.org/online_books/advanced_bash_scripting_guide/exitcodes.html
[2] Quote from the bash(1) manual page:
EXIT STATUS
... Exit statuses fall between 0 and 255, though as
explained below, the shell may use values above 125
specially. ...
... When a command terminates on a fatal signal N, bash uses
the value of 128+N as the exit status.
If a command is not found, the child process created to
execute it returns a status of 127. If a command is found
but is not executable, the return status is 126.
[3] Quote from the Glib Reference Manual, Spawning Processes section,
for function g_spawn_check_exit_status():
https://developer.gnome.org/glib/stable/glib-Spawning-Processes.html#g-spawn-check-exit-status
The g_spawn_sync() and g_child_watch_add() family of APIs return
an exit status for subprocesses encoded in a platform-specific
way. On Unix, this is guaranteed to be in the same format
waitpid() returns, ...
Bug 754684 - Updates to FileSystem:: and Utils::execute_command()
functions
Previously partition naming had only been implemented for gpt. Make the
code ready to support naming of the other partition table types for
which libparted supports naming. Specifically: amiga, dvh, mac and
pc98 in addition to gpt. Document issues found with some of these
partition table types, which can relatively easily been worked around.
Leave support of naming for partition table types other than gpt
disabled, mostly just to reduce ongoing testing effort, at least until
there is any user demand for it.
Bug 746214 - Partition naming enhancements
Function Utils::get_filesystem_kernel_name() returns the name of the
file system as needed for use in the mount command:
mount -t TYPE DEVICE DIR
Needed because the kernel / mount name is 'hfsplus' where as libparted /
GParted, as reported by Utils::get_filesystem_string(), calls it 'hfs+'.
So far just added debugging when mounting a file system to test the
function works.
# ./gartedbin
======================
libparted : 2.1
======================
DEBUG: (hfsplus) # mount -v /dev/sdb5 "/mnt/5"
DEBUG: (nilfs2) # mount -v /dev/sdb1 "/mnt/1"
Bug 742741 - Nilfs2 file system is unusable on RHEL/CentOS 6
Only recognises ReFS file system. No other actions are supported.
Requires blkid from util-linux >= 2.24.
Bug #738471 - ReFS file system is not recognised
GParted's primary inbuilt busy detection method is "is the partition
mounted?". A custom method is used for LVM2 PV because its not a
mounted file system.
Make busy detection selectable per file system type.
.fs.busy = FS::NONE (default)
No busy detection.
.fs.busy = FS::GPARTED
Use internal GParted method which checks if the partition is
mounted.
.fs.busy = FS:EXTERNAL
Call the file system type's member function is_busy().
LVM2 PV busy detection changes from a special case to just electing to
call the lvm2_pv::is_busy() method. Linux Software RAID remains a
special case because it's only recognised, but not otherwise supported.
Bug #723842 - GParted resizes the wrong filesystem (does not pass the
devid to btrfs filesystem resize)
As part of the work on bug 652044 - uses deprecated APIs, selectable
vertical alignment was defaulted to ALIGN_CENTER for all labels. The
relevant commits can be viewed in comment 26 of said bug report.
https://bugzilla.gnome.org/show_bug.cgi?id=652044#c26
For multi-line labels a vertical ALIGN_CENTER value is not
consistently aesthetically pleasing. This becomes obvious when a
single-line heading label is paired with a multi-line value label.
To improve the aesthetics, a vertical alignment of ALIGN_TOP is
preferred.
Hence re-add the ability to optionally specify a vertical alignment for
labels. If a yalign value is not specified a default vertical alignment
of ALIGN_CENTER is used.
Only recognises partitions containing BitLocker Disk Encryption content.
No other actions are supported.
Bug #723232 - BitLocker Disk Encryption not recognised
This is part of parent bug:
Bug #721455 - Obsolete info in license text on multiple modules
and GNOME Goal:
https://wiki.gnome.org/Initiatives/GnomeGoals/Proposals
* verify all source files to make sure they have a license and a
copyright, and that both are up-to-date
Bug #721565 - License text contains obsolete FSF postal address
Many file systems are capable of growing while mounted, and a few can
even shrink. This support must be explicitly enabled at configure time
with the --enable-online-resize flag and depends on a patched libparted.
Also requires kernel >= 3.6 for partition resizing, even if the
partition is in use (BLKPG_RESIZE_PARTITION).
Thanks to Mike Fleetwood for double check mark idea instead of a second
column to show the online grow/shrink.
Bug #694622 - Add support for online resize
Read the contents of /proc/mdstat file to determine if a device is a
member of of an active RAID array.
$ cat /proc/mdstat
Personalities : [raid1]
md1 : active raid1 sda1[2] sdb1[3]
524224 blocks super 1.0 [2/2] [UU]
md2 : active raid1 sdb2[2] sda2[3](F)
5238720 blocks super 1.1 [2/1] [U_]
md3 : active raid1 sdb3[1]
10477440 blocks super 1.1 [2/1] [_U]
bitmap: 1/1 pages [4KB], 65536KB chunk
md4 : inactive sda4[0](S)
1048564 blocks super 1.2
unused devices: <none>
There are 5 example Linux Software RAID arrays, md1 to md5. All are
RAID1 mirrors with 2 members, in various states.
Array Members Status
md1 sda1, sdb2 Fully operational.
md2 sda2, sdb2 Member sda2 marked as faulty. (Device sda2 is
still in use).
md3 sda3, sdb3 Member sda3 has been removed. (Device sda3 is
not in use).
md4 sda4, sdb4 Incremental start of member sda4 only. (Neither
member devices is in use).
md5 sda5, sdb5 Array stopped. (Neither member device is in
use).
Also disable "Unmount" in the partition menu for active RAID array
members.
Bug #709640 - Linux Swap Suspend and Software RAID partitions not
recognised
Recognise in kernel, Linux Swap Suspend partitions. (When hibernated
the kernel write the RAM out to swap space and changes the magic string
from swap space to suspend). Recognition required either
libparted >= 1.8.8.1 or blkid from util-linux >= 2.15 or before that
blkid from e2fsprogs >= 1.39.
Recognise Linux Software RAID partitions. Recognition requires blkid
from util-linux >= 2.15.
Example:
# blkid /dev/sda10 /dev/sda11
/dev/sda10: ... TYPE="swsuspend"
/dev/sda11: ... TYPE="linux_raid_member"
# parted /dev/sda print
Model: ATA SAMSUNG HM500JI (scsi)
Disk /dev/sda: 500GB
Sector size (logical/physical): 512B/512B
Partition Table: msdos
Number Start End Size Type File system Flags
...
10 361GB 362GB 1074MB logical swsusp
11 362GB 363GB 1074MB logical raid
Bug #709640 - Linux Swap Suspend and Software RAID partitions not
recognised
Step 3 of 3:
Now that all label widgets are created with ALIGN_LEFT and ALIGN_CENTER
alignment remove the x_align and y_align parameters from mk_label() and
always use this alignment. Also specify this alignment via floats
rather than enumerators, one of which was deprecated.
Bug #652044 - uses deprecated APIs
Currently the btrfs command outputs figures to 2 decimal places followed
by an SI multiplier, e.g. 1.00GB.
This patch to btrfs-progs has been included in the integration
repository and will likely be included in the official btrfs-progs
repository at some point. It changes btrfs-progs to use IEC
multipliers, e.g. 1.00GiB. In fact multipliers already aren't used for
figures less than 1024.
[PATCH] btrfs-progs: use IEC units for size
http://permalink.gmane.org/gmane.comp.file-systems.btrfs/26888https://patchwork.kernel.org/patch/2825841/
Make GParted capable of also accepting IEC prefix multipliers, just "B"
for bytes and no multiplier, as well as an optional space between the
number and multiplier. Therefore accept values like these:
1.00GB 1.00 GB
1.00GiB 1.00 GiB
1073741824B 1073741824 B
1073741824
Closes Bug #706914 - Prepare for btrfs tools using IEC prefix
multipliers
With recent btrfs-progs, GParted failed to format a btrfs file system
over the top of an existing one. Make btrfs failed with this error:
# mkfs.btrfs /dev/sdb1
...
/dev/sdb1 appears to contain an existing filesystem (btrfs).
Use the -f option to force overwrite.
With this commit to btrfs-progs on 2013-02-19, mkfs.btrfs checks for
existing file system signatures, including all mirror copies of btrfs
super blocks, before writing to the partition.
http://git.kernel.org/cgit/linux/kernel/git/mason/btrfs-progs.git/commit/?id=2a2d8e1962e8b6cda7b0a7584f6d2fb95d442cb6
btrfs-progs: require mkfs -f force option to overwrite filesystem or partition table
Make GParted clear all the mirror copies of the btrfs file system super
blocks as erase_filesystem_signatures() is intended to prevent detection
of old signatures. This also avoids having to determine if the -f
option to mkfs.btrfs is available before trying to use it.
Closes Bug #705426 - Formatting Existing BTRFS Partition as BTRFS Fails
Because mkfs.btrfs Is Not Run with "-f"
It was difficult to retrieve whether a filesystem's label can be set on reformat.
The read_label flag can't be used as it decides whether to use the logic in the filesystem class
rather than the fallback in GParted::set_device_partitions, to determine the label of a partition.
The create_with_label flag is NONE for file systems that we cannot format with a
label (or that we cannot format at all).
The value is usually EXTERNAL for file systems that we can format with a label.
Include guards need to be unique within GParted code and all included
library header files.
http://en.wikipedia.org/wiki/Include_guard#Difficulties
Use this model for all include guards:
#ifndef GPARTED_FILE_NAME_H
#define GPARTED_FILE_NAME_H
...
#endif /* GPARTED_FILE_NAME_H */
Closes Bug #539297 - Make include guards unique
Add "cleared" to the bottom of list of file system formats available in
the Create new Partition dialog and in the Format to --> (file system
list) menu. This clears existing file system signatures in the newly
created partitions and existing partitions respectively.
Bug #688882 - Improve clearing of file system signatures
Only supports detection and creation of f2fs file systems. Requires
f2fs-tools and a blkid with f2fs support, util-linux > 2.22.2.
f2fs-tools v1.1.0 only supports file system creation.
Currently requires util-linux directly from the git repository as f2fs
support was only committed on 5 Feb 2013 and it has not yet been
released.
Closes Bug #695396 - Please apply f2fs patch
Mike Fleetwood