* break when there's nothing to read
Signed-off-by: Wang, Yi A <yi.a.wang@intel.com>
* Different approach, only listen on stdin when `LOG_LEVEL=debug` (which
is where dropping to a debugger is important).
---------
Signed-off-by: Wang, Yi A <yi.a.wang@intel.com>
Co-authored-by: Wang, Yi A <yi.a.wang@intel.com>
* Add basic FP8 KV cache support
This change adds rudimentary FP8 KV cache support. The support is
enabled by passing `--kv-cache-dtype fp8_e5m2` to the launcher. Doing so
uses this type for the KV cache. However support is still limited:
* Only the `fp8_e5m2` type is supported.
* The KV cache layout is the same as `float16`/`bfloat16` (HND).
* The FP8 KV cache is only supported for FlashInfer.
* Loading of scales is not yet supported.
* Fix Cargo.toml
Remove compute capability lock
We are only calling the `get_cuda_capability` function once, so avoiding
the cost of multiple calls is not really necessary yet.
* Improve support for GPUs with capability < 8
- For models that cannot use flashinfer, use flash-attn v1 + paged
attention for models with a compute capability older than 8.
- Disable prefix caching when using paged attention.
- When using flash-attn v1, pass the key/value, rather than the
cache, since v1 cannot use block tables.
* nix: add flash-attn-v1 to the server environment
* Move disabling prefix caching into the block of exceptions
* Capability as `usize`s
* Adding prefix test.
* [WIP] tmp dump of integration load tests.
* Remove other tensor creation.
* Fixed the radix tree.
Used a slice everywhere in radix.rs to keep the cheap Arc cloning
instead of recomputing the input_ids.
* Fix parsing
* Is it really flashinfer version ?
* Remove some comments.
* Revert the max prefix hit.
* Adding numpy to diff.
* Upgraded flashinfer.
* Upgrading some stuff.
* Are we done yet ?
* Minor fixup
* Remove 1 log and put back the other.
* Add comment for why slot 0 is OK.
* Mounting on the job.
* Get me a debug branch
* Debugging CIs is fun.
* Attempt #28
* wip
* Tmate.
* Praying.
* Updating VLM causal model with updated context.
* Important line got squashed.
* Tmate again.
* Fingers crossed.
* We want only 1 run of integration tests.....
---------
Co-authored-by: Guillaume LEGENDRE <glegendre01@gmail.com>
* Making prefix/flashinfer the default and testing the full release tests.
* Include flashinfer in the docker.
* Using prebuilt.
* Allowing window_left_size (dummy version).
* Disabling flashinfer/prefix caching on odd head_dim
* Disable prefix caching for lora.
* More specific codes.
* Update lock
* Updating integration tests with new values with FI/FD.
Remove paged as a default too, and using FD everywhere.
* Update cargo lock ?
* Upgrade to 1.80 because of bitstream...
* Everywhere 1.80
* Forgot last default place.
* Apply suggestions from code review
Co-authored-by: drbh <david.richard.holtz@gmail.com>
* Updated flake lock
* Tmp
* Upgrade resolution system for less errors in resolution.
* Remove lambda for cleaner function.
* Handling debugger.
* OVerride the env in server tests.
* Is this enough to make it work ?
* This seems to be working.
* Downgrade some logs.
* Fixing the default for vlm.
* Don't enable prefix caching on VLM just yet.
* Change `add_special_tokens` in order to have the correct tokens for chat
input and not (since it's super important with the prefixing now)
* Fixing prefix caching for flashdecoding.
* Update all models.
* Fixed flashinfer version.
* add_special_tokens is internal only
* Fixing seqlen with the new vlms.
* Fixing the issue with `add_special_tokens` not being passed around.
* Fixing the test.
* Removing encoder_decoder (seq2seq).
* Update the chat test.
* Fixing the batching tokenization in flash causal lm.
* Truncating left for radix purposes.
* Oops this doesn't belong here.
* Put back default pure shell.
* Update server tests
- Default to throughput test in k6
- Use TGI_WIGGLE_ROOM to adjust wiggle room
* Only n_heads / process_group.size() are necessary.
* Revert the integrationt tests change (seem linked to head_size
modification).
* Adding error message when assert is violated.
* Fixing the free algorithm to handle times where the common prefix is
smaller.
* Apply suggestions from code review
Co-authored-by: OlivierDehaene <olivier@huggingface.co>
* Update server/text_generation_server/layers/attention/common.py
Co-authored-by: OlivierDehaene <olivier@huggingface.co>
* Fix disabling prefix caching - Fix windowing checks.
* Revert the Cohere tokenizer change (for now using a revision instead).
* Fmt.
---------
Co-authored-by: drbh <david.richard.holtz@gmail.com>
Co-authored-by: OlivierDehaene <olivier@huggingface.co>
* Fixing exl2 and other quanize tests again.
* Mark exl2 as non release (so CI tests them, needs to be removed latet).
* Fixing exl2 (by disabling cuda graphs)
* Fix quantization defaults without cuda graphs on exl2 (linked to new
issues with it).
* Removing serde override.
* Go back to released exl2 and remove log.
* Adding warnings for deprecated bitsandbytes + upgrade info to warn.
* Add API_Key for Auth and conditionally add authorisation for non info/health endpoints.
* change name to info routes
* Fix comment
* convert strings to lowercase for case insensitive comparison
* convert header to string
* fixes and update docs
* update docs again
* revert wrong update
---------
Co-authored-by: Kevin Duffy <kevin.duffy94@gmail.com>
* draft of usage stats
* fix wrong link
* launcher doesn't need sysinfo dep
* only tokenizer class instead of hole struct
* unused import
* fix clippy errors
* update openAPI doc
* cargo fmt
* fix error in passing flags to router
* try again to update docs
* run pre-commit locally
* Update router/src/main.rs
Co-authored-by: Hugo Larcher <hugo.larcher@huggingface.co>
* Update router/src/main.rs
Co-authored-by: Hugo Larcher <hugo.larcher@huggingface.co>
* on crash use anonymous error event
* delete json_output and ngrok
* more robust way of checking if is in container
* more robust nvidia smi
* parse xpu more robustly
* fix errors
* add nvidia-smi details in docs
* cargo fmt
* fix clippy
* should make docs check pass
* Update router/src/usage_stats.rs
Co-authored-by: Hugo Larcher <hugo.larcher@huggingface.co>
* error reason can't be in nested json
* cargo fmt
---------
Co-authored-by: Hugo Larcher <hugo.larcher@huggingface.co>
Co-authored-by: Erik Kaunismäki <erikkaum@Eriks-MacBook-Pro.local>
* feat: first draft load multiple lora
* feat: load weights within layer and refactor lora pass
* fix: refactor and reduce lora math
* feat: baseline impl single request multi lora support
* feat: prefer lorax implementation and port loading logic
* fix: prefer adapter_data and refactors
* feat: perfer loraxs custom punica kernels and add mlp loras
* fix: adjust batch for bgmv
* fix: adjust adapter_segments logic when in batch
* fix: refactor and move changes to v3 proto
* fix: pass model_id for all flash causal lms
* fix: pass model_id for all causal and seq2seq lms
* fix: add model_id to model test
* feat: add lora support to mistral and refactors
* feat: prefer model id in request
* fix: include rust code for adapter id
* feat: bump launcher and add new lora docs
* feat: support base model generation and refactors
* fix: rename doc to retry ci build
* feat: support if vlm models
* fix: add adapter_data param and avoid missing layers
* fix: add adapter_data param to phi and neox
* fix: update all models forwards to include adapter_data
* fix: add model_id to IdeficsCausalLM
* Update lora.md
Fixed a typo
* Update lora.md
Fixing spam image
* fix: add lora kernel to dockerfile, support running without kernels and refactors
* fix: avoid dockerfile conflict
* fix: refactors and adjust flash llama lora logic
* fix: skip llama test due to CI issue (temp)
* fix: skip llama test CI (temp) 2
* fix: revert skips and prefer updated ci token for tests
* fix: refactors and helpful comments
* fix: add noop in TensorParallelAdapterRowLinear too
* fix: refactor and move shard_lora_weights logic
* fix: exit early if no adapter_data
---------
Co-authored-by: Derek <datavistics@gmail.com>
* use xpu-smi to dump used memory
xpu use "ZE_AFFINITY_MASK" to control card, usage is like CUDA_VISIBLE_DEVICES
Signed-off-by: Wang, Yi A <yi.a.wang@intel.com>
* Update server/text_generation_server/utils/import_utils.py
Co-authored-by: Daniël de Kok <me@github.danieldk.eu>
---------
Signed-off-by: Wang, Yi A <yi.a.wang@intel.com>
Co-authored-by: Daniël de Kok <me@github.danieldk.eu>
* update vllm commit & fix models using sliding window
* update
* update commit
* fix bug where tunableop is bound to cuda graph even when cuda graph are disabled
* enable tunableop by default
* fix sliding window
* address review
* dead code
* precise comment
* is it flaky?
This change adds support for Marlin-quantized models. Marlin is an
FP16xINT4 matmul kernel, which provides good speedups decoding batches
of 16-32 tokens. It supports quantized models with symmetric
quantization, groupsize -1 or 128, and 4-bit.
Tested with:
- Llama 2
- Llama 3
- Phi 3
Mostly straightforward, changes to existing code:
* Wrap quantizer parameters in a small wrapper to avoid passing
around untyped tuples and needing to repack them as a dict.
* Move scratch space computation to warmup, because we need the
maximum input sequence length to avoid allocating huge
scratch buffers that OOM.
- Added a debug log for speculated ids (helps seeing in logs quality of
a speculator).
- Remove newlines from child process logs when re-emitting in non JSON
mode.
- Made standard level be closer to what's expected (only our binaries
level).
- Propagate that level correctly to the shard (was forced into INFO).
# What does this PR do?
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
# What does this PR do?
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
---------
Co-authored-by: Daniël de Kok <me@github.danieldk.eu>
# What does this PR do?
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
# What does this PR do?
Just unifying some branches and making intentions clearer (no cuda graph
when 0 all the way in the launcher)
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
# What does this PR do?
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
# What does this PR do?
This should enable more aggressive by default stacking, meaning better
throughput (in throughput constrained environements).
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
# What does this PR do?
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
---------
Signed-off-by: Wang, Yi A <yi.a.wang@intel.com>
Co-authored-by: Morgan Funtowicz <funtowiczmo@gmail.com>
Co-authored-by: Nicolas Patry <patry.nicolas@protonmail.com>
# What does this PR do?
On TPU (and probably inferentia). The model needs to know right off the
bat about BATCH_SIZE and MAX_TOTAL_TOKENS (since the entire cache will
be determined by both).
This PR sends that information to the shards to they can allocate
accordingly. Should be no-op for other backends.
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
# What does this PR do?
- Renamed `max_input_length` into `max_input_tokens` for consistency
(backward compatible change, will yell if both are set.)
- Will now use the config for `max_input_tokens` `max_total_token` and
`max_batch_total_tokens`.
- Capping the values to 16k in order to save VRAM on behalf of users
(overriddable by simply setting the values).
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
# What does this PR do?
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
---------
Co-authored-by: Dong Shin <d0104.shin@gmail.com>
wrap text-generation-launcher in docker image
mask ldconfig failures to user (no need in most cases anyway)
---------
Signed-off-by: Raphael Glon <oOraph@users.noreply.github.com>
Co-authored-by: Raphael Glon <oOraph@users.noreply.github.com>
# What does this PR do?
```
text-generation-launcher --model-id XXX # Uses cuda graphs by default
text-generation-launcher --model-id XXX --cuda-graphs "1,2" #Restrict the number of cuda graphs which saves VRAM
text-generation-launcher --model-id XXX --cuda-graphs "0" # Disabling it entirely
```
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
# What does this PR do?
Fix the following carsh when build the docker on Ubuntu22.04
```
error[E0432]: unresolved import `nix::sys::signal::Signal`
--> launcher/src/main.rs:2:30
|
2 | use nix::sys::signal::{self, Signal};
| ^^^^^^ no `Signal` in `sys::signal`
|
= help: consider importing this type alias instead:
ctrlc::Signal
error[E0432]: unresolved import `nix::unistd::Pid`
--> launcher/src/main.rs:3:5
|
3 | use nix::unistd::Pid;
| ^^^^^^^^^^^^^^^^ no `Pid` in `unistd`
|
note: found an item that was configured out
--> /usr/local/cargo/registry/src/index.crates.io-6f17d22bba15001f/nix-0.27.1/src/unistd.rs:183:12
|
183 | pub struct Pid(pid_t);
| ^^^
= note: the item is gated behind the `process` feature
error[E0425]: cannot find function `kill` in module `signal`
```
<!--
Congratulations! You've made it this far! You're not quite done yet
though.
Once merged, your PR is going to appear in the release notes with the
title you set, so make sure it's a great title that fully reflects the
extent of your awesome contribution.
Then, please replace this with a description of the change and which
issue is fixed (if applicable). Please also include relevant motivation
and context. List any dependencies (if any) that are required for this
change.
Once you're done, someone will review your PR shortly (see the section
"Who can review?" below to tag some potential reviewers). They may
suggest changes to make the code even better. If no one reviewed your PR
after a week has passed, don't hesitate to post a new comment
@-mentioning the same persons---sometimes notifications get lost.
-->
<!-- Remove if not applicable -->
Fixes # (issue)
## Before submitting
- [ ] This PR fixes a typo or improves the docs (you can dismiss the
other checks if that's the case).
- [ ] Did you read the [contributor
guideline](https://github.com/huggingface/transformers/blob/main/CONTRIBUTING.md#start-contributing-pull-requests),
Pull Request section?
- [ ] Was this discussed/approved via a Github issue or the
[forum](https://discuss.huggingface.co/)? Please add a link
to it if that's the case.
- [ ] Did you make sure to update the documentation with your changes?
Here are the
[documentation
guidelines](https://github.com/huggingface/transformers/tree/main/docs),
and
[here are tips on formatting
docstrings](https://github.com/huggingface/transformers/tree/main/docs#writing-source-documentation).
- [ ] Did you write any new necessary tests?
## Who can review?
Anyone in the community is free to review the PR once the tests have
passed. Feel free to tag
members/contributors who may be interested in your PR.
<!-- Your PR will be replied to more quickly if you can figure out the
right person to tag with @
@OlivierDehaene OR @Narsil
-->
---------
Signed-off-by: yuanwu <yuan.wu@intel.com>
Co-authored-by: drbh <david.richard.holtz@gmail.com>
Daniël de Kok