To transfer ~5 XMR to an address such that your balance drops by exactly 5 XMR, provide a `subtractfeefrom` flag to the `transfer` command. For example:
transfer 76bDHojqFYiFCCYYtzTveJ8oFtmpNp3X1TgV2oKP7rHmZyFK1RvyE4r8vsJzf7SyNohMnbKT9wbcD3XUTgsZLX8LU5JBCfm 5 subtractfeefrom=all
If my walet balance was exactly 30 XMR before this transaction, it will be exactly 25 XMR afterwards and the destination address will receive slightly
less than 5 XMR. You can manually select which destinations fund the transaction fee and which ones do not by providing the destination index.
For example:
transfer 75sr8AAr... 3 74M7W4eg... 4 7AbWqDZ6... 5 subtractfeefrom=0,2
This will drop your balance by exactly 12 XMR including fees and will spread the fee cost proportionally (3:5 ratio) over destinations with addresses
`75sr8AAr...` and `7AbWqDZ6...`, respectively.
Disclaimer: This feature was paid for by @LocalMonero.
Read more about k-anonymity [here](https://en.wikipedia.org/wiki/K-anonymity). We implement this feature in the monero daemon for transactions
by providing a "Txid Template", which is simply a txid with all but `num_matching_bits` bits zeroed out, and the number `num_matching_bits`. We add an operation to `BlockchainLMDB` called
`get_txids_loose` which takes a txid template and returns all txids in the database (chain and mempool) that satisfy that template. Thus, a client can
ask about a specific transaction from a daemon without revealing the exact transaction they are inquiring about. The client can control the statistical
chance that other TXIDs (besides the one in question) match the txid template sent to the daemon up to a power of 2. For example, if a client sets their `num_matching_bits`
to 5, then statistically any txid has a 1/(2^5) chance to match. With `num_matching_bits`=10, there is a 1/(2^10) chance, so on and so forth.
Co-authored-by: ACK-J <60232273+ACK-J@users.noreply.github.com>
959a3e6 wallet2: ensure imported outputs subaddresses are created (moneromooo-monero)
a098504 wallet2: better test on whether to allow output import (moneromooo-monero)
c5579ac allow exporting outputs in chunks (moneromooo-monero)
1e912ec wallet2: fixes for export/import output flow (j-berman)
692f1d4 wallet2: do not assume imported outputs must be non empty (moneromooo-monero)
67b6d6a wallet2: prevent importing outputs in a hot wallet (moneromooo-monero)
d9fc666 wallet2: fix missing subaddress indices in 'light' exported outputs (moneromooo-monero)
There are vulnerabilities in multisig protocol if the parties do not
trust each other, and while there is a patch for it, it has not been
throroughly reviewed yet, so it is felt safer to disable multisig by
default for now.
If all parties in a multisig setup trust each other, then it is safe
to enable multisig.
Adds the following:
- "get_miner_data" to RPC API
- "json-miner-data" to ZeroMQ subscriber contexts
Both provide the necessary data to create a custom block template. They are used by p2pool.
Data provided:
- major fork version
- current height
- previous block id
- RandomX seed hash
- network difficulty
- median block weight
- coins mined by the network so far
- mineable mempool transactions
This allows flushing internal caches (for now, the bad tx cache,
which will allow debugging a stuck monerod after it has failed to
verify a transaction in a block, since it would otherwise not try
again, making subsequent log changes pointless)
Daemons intended for public use can be set up to require payment
in the form of hashes in exchange for RPC service. This enables
public daemons to receive payment for their work over a large
number of calls. This system behaves similarly to a pool, so
payment takes the form of valid blocks every so often, yielding
a large one off payment, rather than constant micropayments.
This system can also be used by third parties as a "paywall"
layer, where users of a service can pay for use by mining Monero
to the service provider's address. An example of this for web
site access is Primo, a Monero mining based website "paywall":
https://github.com/selene-kovri/primo
This has some advantages:
- incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own
- incentive to run your own node instead of using a third party's, thereby promoting decentralization
- decentralized: payment is done between a client and server, with no third party needed
- private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance
- no payment occurs on the blockchain, so there is no extra transactional load
- one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy)
- no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do
- Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue
- no large credit balance maintained on servers, so they have no incentive to exit scam
- you can use any/many node(s), since there's little cost in switching servers
- market based prices: competition between servers to lower costs
- incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others
- increases network security
- helps counteract mining pools' share of the network hash rate
- zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner
And some disadvantages:
- low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine)
- payment is "random", so a server might go a long time without a block before getting one
- a public node's overall expected payment may be small
Public nodes are expected to compete to find a suitable level for
cost of service.
The daemon can be set up this way to require payment for RPC services:
monerod --rpc-payment-address 4xxxxxx \
--rpc-payment-credits 250 --rpc-payment-difficulty 1000
These values are an example only.
The --rpc-payment-difficulty switch selects how hard each "share" should
be, similar to a mining pool. The higher the difficulty, the fewer
shares a client will find.
The --rpc-payment-credits switch selects how many credits are awarded
for each share a client finds.
Considering both options, clients will be awarded credits/difficulty
credits for every hash they calculate. For example, in the command line
above, 0.25 credits per hash. A client mining at 100 H/s will therefore
get an average of 25 credits per second.
For reference, in the current implementation, a credit is enough to
sync 20 blocks, so a 100 H/s client that's just starting to use Monero
and uses this daemon will be able to sync 500 blocks per second.
The wallet can be set to automatically mine if connected to a daemon
which requires payment for RPC usage. It will try to keep a balance
of 50000 credits, stopping mining when it's at this level, and starting
again as credits are spent. With the example above, a new client will
mine this much credits in about half an hour, and this target is enough
to sync 500000 blocks (currently about a third of the monero blockchain).
There are three new settings in the wallet:
- credits-target: this is the amount of credits a wallet will try to
reach before stopping mining. The default of 0 means 50000 credits.
- auto-mine-for-rpc-payment-threshold: this controls the minimum
credit rate which the wallet considers worth mining for. If the
daemon credits less than this ratio, the wallet will consider mining
to be not worth it. In the example above, the rate is 0.25
- persistent-rpc-client-id: if set, this allows the wallet to reuse
a client id across runs. This means a public node can tell a wallet
that's connecting is the same as one that connected previously, but
allows a wallet to keep their credit balance from one run to the
other. Since the wallet only mines to keep a small credit balance,
this is not normally worth doing. However, someone may want to mine
on a fast server, and use that credit balance on a low power device
such as a phone. If left unset, a new client ID is generated at
each wallet start, for privacy reasons.
To mine and use a credit balance on two different devices, you can
use the --rpc-client-secret-key switch. A wallet's client secret key
can be found using the new rpc_payments command in the wallet.
Note: anyone knowing your RPC client secret key is able to use your
credit balance.
The wallet has a few new commands too:
- start_mining_for_rpc: start mining to acquire more credits,
regardless of the auto mining settings
- stop_mining_for_rpc: stop mining to acquire more credits
- rpc_payments: display information about current credits with
the currently selected daemon
The node has an extra command:
- rpc_payments: display information about clients and their
balances
The node will forget about any balance for clients which have
been inactive for 6 months. Balances carry over on node restart.
jeffro256