- Detach & re-process txs >= lowest scan height
- ensures that if a user calls scan_tx(tx1) after scanning tx2,
the wallet correctly processes tx1 and tx2
- if a user provides a tx with a height higher than the wallet's
last scanned height, the wallet will scan starting from that tx's
height
- scan_tx requires trusted daemon iff need to re-process existing
txs: in addition to querying a daemon for txids, if a user
provides a txid of a tx with height *lower* than any *already*
scanned txs in the wallet, then the wallet will also query the
daemon for all the *higher* txs as well. This is likely
unexpected behavior to a caller, and so to protect a caller from
revealing txid's to an untrusted daemon in an unexpected way,
require the daemon be trusted.
Before this change, if a multisig peer asked you to sign a transaction with a frozen enote, the wallet will do it without any error or warning. This change makes it
so that wallets will refuse to sign multisig transactions with frozen enotes.
Disclaimer: This PR was generously funded by @LocalMonero.
All Monero binaries have 1 second startup delay because of this code. This is especially noticeable and affects UX in Monero GUI wallet with local node where it often starts another monerod instance to run commands and query node status.
Ensures both transfers and sweeps use a fee that's calculated
from the tx's weight. Using different logic could theoretically
enable distinguishability between the two types of txs. We don't
want that.
The gamma picker and the caller code did not quite agree on the
number of rct outputs available for use - by one block - which
caused an infinite loop if the picker could never pick outputs
from that block but already had picked all other outputs from
previous blocks.
Also change the range to select from using code from UkoeHB.
It's not allowed to use WaitForSingleObject with _beginthread, because the thread closes its own handle before exiting.
So the wait function will either wait on an invalid handle, or on a different handle used by something else.
Or, if it starts waiting before the thread exits, the behavior is undefined according to MS: "If this handle is closed while the wait is still pending, the function's behavior is undefined."
In my test sync I observed threads getting stuck infinitely on WaitForSingleObject, and then rx_set_main_seedhash spamming new threads when RandomX seed changes again. Eventually the system ran out of resources, and monerod aborted with "Couldn't start RandomX seed thread" message.
This PR fixes it by using `_beginthreadex` instead and explicitly closing the handle when it's safe.
d7a81cc p2p: do not log to global when re-blocking a subnet (moneromooo-monero)
d84a0d7 p2p: avoid spam blocking ipv4 addresses in a blocked subnet (moneromooo-monero)
c4af33e Enforce restricted # pool txs served via RPC + optimize chunked reqs (j-berman)
9752116 wallet2, RPC: Optimize RPC calls for periodic refresh from 3 down to 1 call (rbrunner7)
- `/getblocks.bin` respects the `RESTRICTED_TX_COUNT` (=100) when
returning pool txs via a restricted RPC daemon.
- A restricted RPC daemon includes a max of `RESTRICTED_TX_COUNT` txs
in the `added_pool_txs` field, and returns any remaining pool hashes
in the `remaining_added_pool_txids` field. The client then requests
the remaining txs via `/gettransactions` in chunks.
- `/gettransactions` no longer does expensive no-ops for ALL pool txs
if the client requests a subset of pool txs. Instead it searches for
the txs the client explicitly requests.
- Reset `m_pool_info_query_time` when a user:
(1) rescans the chain (so the wallet re-requests the whole pool)
(2) changes the daemon their wallets points to (a new daemon would
have a different view of the pool)
- `/getblocks.bin` respects the `req.prune` field when returning
pool txs.
- Pool extension fields in response to `/getblocks.bin` are optional
with default 0'd values.
- Straight-forward call interface: `void rx_slow_hash(const char *seedhash, const void *data, size_t length, char *result_hash)`
- Consensus chain seed hash is now updated by calling `rx_set_main_seedhash` whenever a block is added/removed or a reorg happens
- `rx_slow_hash` will compute correct hash no matter if `rx_set_main_seedhash` was called or not (the only difference is performance)
- New environment variable `MONERO_RANDOMX_FULL_MEM` to force use the full dataset for PoW verification (faster block verification)
- When dataset is used for PoW verification, dataset updates don't stall other threads (verification is done in light mode then)
- When mining is running, PoW checks now also use dataset for faster verification
For privacy reasons, time functions use GMT, to avoid logs leaking
timezones. It'd make more sense to use localtime for wallet output
(which are not logged by default), but that adds inconsistencies
which can also be confusing. So add a Z suffix for now to make it
clear these are not local time.
Unrelated, but similar code-wise to #8643. There is a check in `DNSResolver` which automatically fails to resolve hostnames which do not contain the `.` character. This PR removes that check.
Fixes#8633. The function `append_net_address` did not parse hostname + port addresses (e.g. `bar:29080`) correctly if the hostname did not contain a `'.'` character.
@vtnerd comments 1
clear up 2nd conditional statement
- fix integrated address test, it was not testing integrated address suport
- fix trezor test build as dependent classes were changed
- add a friend test class for Monero::WalletImpl to support wallet api tests
When using wallet_api in tests, synthetic chain is used. Without being able to set `allow_mismatched_daemon_version` in the underlying wallet, we are not able to use a synthetic chain with the tests
23fde15 wallet_rpc_server: chunk refresh to keep responding to RPC while refreshing (moneromooo-monero) 5bb2369 wallet_rpc_server: add --no-initial-sync flag for quicker network binding (moneromooo-monero)
update_checkpoints() makes a few DNS requests and can take up to 20-30 seconds to complete (3-6 seconds on average). It is currently called from core::handle_incoming_block() which holds m_incoming_tx_lock, so it blocks all incoming transactions and blocks processing while update_checkpoints() is running. This PR moves it to until after a new block has been processed and relayed, to avoid full monerod locking.
959a3e6 wallet2: ensure imported outputs subaddresses are created (moneromooo-monero)
a098504 wallet2: better test on whether to allow output import (moneromooo-monero)
c5579ac allow exporting outputs in chunks (moneromooo-monero)
1e912ec wallet2: fixes for export/import output flow (j-berman)
692f1d4 wallet2: do not assume imported outputs must be non empty (moneromooo-monero)
67b6d6a wallet2: prevent importing outputs in a hot wallet (moneromooo-monero)
d9fc666 wallet2: fix missing subaddress indices in 'light' exported outputs (moneromooo-monero)
- spend secret key is no longer the sum of multisig key shares;
no need to check that is the case upon restore.
- restoring a multisig wallet from multisig info means that the
wallet must have already completed all setup rounds. Upon restore,
set the number of rounds completed accordingly.
600de07 wallet_rpc_server: longer timeout for stop_mining (moneromooo-monero)
ac6db92 functional_tests: silence the cpu power test program (moneromooo-monero)
Being offline is not a good enough heuristic, so we keep track
of whether the wallet ever refreshed from a daemon, which is a
lot better, and probably the best we can do without manual user
designation (which would break existing cold wallet setups till
the user designates those wallets)
Before the fix, it processed all transactions in the mempool which could be very slow when mempool grows to several MBs in size. I observed `get_block_template_backlog` taking up to 15 seconds of CPU time under high mempool load.
After the fix, only transactions that can potentially be mined in the next block will be processed (a bit more than the current block median weight).
That RPC will wait for mining to actually stop, which can be a while
if randomx has just started on randomx_init_dataset.
This fixes occasional failures in the mining functional test
hash_extra: don't test for success in `jh_hash` and `skein_hash` since its guaranteed
device_ledger: move anonymous global variable apdu_verbose into .cpp file
Add comments to `refreshed` method variable in wallet2
If we were to call it with 100, it would cause rsiz to be 0,
leading to an infinite loop.
This is really a pedantic patch, but since there's already a
range test, might as well make it better.
ade464a ITS#9385 fix using MDB_NOSUBDIR with nonexistent file (Kris Zyp)
033a32a Remove check is_directory check on lmdb path (Howard Chu)
b096e16 Revert 'db_lmdb: test for mmap support at init time' (Howard Chu)
493577a Silence spurious fallthru warning (Howard Chu)
b46a60e Fix rawpart flag collision (Howard Chu)
4e7586c More RAWPART support (Howard Chu)
747f5d3 Preliminary raw partition support (Howard Chu)
quick patch which fixes the issue where if you use some macros from `http_server_handlers_map2.h` you have to be in the `epee` namespace or it doesn't compile. Now can remove `using namespace epee;` from header file `core_rpc_server.h`, which caused a couple of name qualifying mistakes
As of OpenSSL 3.0, `SHA256_Init`, `SHA256_Update`, and `SHA256_Final`
are deprectaed in favor of the higher-level `EVP_*` class of functions.
This causes compiler warnings, and sooner or later, will cause build
errors as these functions are excluded from distro headers.
Also add some documentation.
There are vulnerabilities in multisig protocol if the parties do not
trust each other, and while there is a patch for it, it has not been
throroughly reviewed yet, so it is felt safer to disable multisig by
default for now.
If all parties in a multisig setup trust each other, then it is safe
to enable multisig.
When forced to deal with an untrusted node, a wallet will quantize
its current height to disguise the real height to the adversary, to
try and minimize the daemon's ability to distinguish returning
wallets.
Daemons will thus return more blocks than the wallet needs, starting
from earlier in the chain. These extra blocks will be disregarded
by the wallet, which had already scanned them.
However, for the purposes of reorg size detection, the wallet assumes
all blocks the daemon sends are different, which is only correct if
the wallet hasn't been coy, which is only the case for trusted
daemons (which you should use). This causes an issue when the size
of this "fake reorg" is above the sanity check threshold at which
the wallet refuses a reorg.
To fix this, the reorg size check is moved later on, when the reorg
is about to actually happen, after the wallet has checked which
blocks are actually different from the ones it expects.
luigi1111