nebula/hostmap.go

737 lines
19 KiB
Go
Raw Permalink Normal View History

2019-11-19 10:00:20 -07:00
package nebula
import (
"errors"
"net"
"net/netip"
2019-11-19 10:00:20 -07:00
"sync"
"sync/atomic"
2019-11-19 10:00:20 -07:00
"time"
"github.com/gaissmai/bart"
2019-11-19 10:00:20 -07:00
"github.com/rcrowley/go-metrics"
"github.com/sirupsen/logrus"
"github.com/slackhq/nebula/cert"
"github.com/slackhq/nebula/config"
"github.com/slackhq/nebula/header"
2019-11-19 10:00:20 -07:00
)
// const ProbeLen = 100
const defaultPromoteEvery = 1000 // Count of packets sent before we try moving a tunnel to a preferred underlay ip address
const defaultReQueryEvery = 5000 // Count of packets sent before re-querying a hostinfo to the lighthouse
const defaultReQueryWait = time.Minute // Minimum amount of seconds to wait before re-querying a hostinfo the lighthouse. Evaluated every ReQueryEvery
2019-11-19 10:00:20 -07:00
const MaxRemotes = 10
const maxRecvError = 4
2019-11-19 10:00:20 -07:00
// MaxHostInfosPerVpnIp is the max number of hostinfos we will track for a given vpn ip
// 5 allows for an initial handshake and each host pair re-handshaking twice
const MaxHostInfosPerVpnIp = 5
2019-11-19 10:00:20 -07:00
// How long we should prevent roaming back to the previous IP.
// This helps prevent flapping due to packets already in flight
2021-03-01 09:14:34 -07:00
const RoamingSuppressSeconds = 2
2019-11-19 10:00:20 -07:00
const (
Requested = iota
PeerRequested
Established
)
const (
Unknowntype = iota
ForwardingType
TerminalType
)
type Relay struct {
Type int
State int
LocalIndex uint32
RemoteIndex uint32
PeerIp netip.Addr
}
2019-11-19 10:00:20 -07:00
type HostMap struct {
sync.RWMutex //Because we concurrently read and write to our maps
Indexes map[uint32]*HostInfo
Relays map[uint32]*HostInfo // Maps a Relay IDX to a Relay HostInfo object
RemoteIndexes map[uint32]*HostInfo
Hosts map[netip.Addr]*HostInfo
preferredRanges atomic.Pointer[[]netip.Prefix]
vpnCIDR netip.Prefix
2021-03-26 08:46:30 -06:00
l *logrus.Logger
2019-11-19 10:00:20 -07:00
}
// For synchronization, treat the pointed-to Relay struct as immutable. To edit the Relay
// struct, make a copy of an existing value, edit the fileds in the copy, and
// then store a pointer to the new copy in both realyForBy* maps.
type RelayState struct {
sync.RWMutex
relays map[netip.Addr]struct{} // Set of VpnIp's of Hosts to use as relays to access this peer
relayForByIp map[netip.Addr]*Relay // Maps VpnIps of peers for which this HostInfo is a relay to some Relay info
relayForByIdx map[uint32]*Relay // Maps a local index to some Relay info
}
func (rs *RelayState) DeleteRelay(ip netip.Addr) {
rs.Lock()
defer rs.Unlock()
delete(rs.relays, ip)
}
func (rs *RelayState) CopyAllRelayFor() []*Relay {
rs.RLock()
defer rs.RUnlock()
ret := make([]*Relay, 0, len(rs.relayForByIdx))
for _, r := range rs.relayForByIdx {
ret = append(ret, r)
}
return ret
}
func (rs *RelayState) GetRelayForByIp(ip netip.Addr) (*Relay, bool) {
rs.RLock()
defer rs.RUnlock()
r, ok := rs.relayForByIp[ip]
return r, ok
}
func (rs *RelayState) InsertRelayTo(ip netip.Addr) {
rs.Lock()
defer rs.Unlock()
rs.relays[ip] = struct{}{}
}
func (rs *RelayState) CopyRelayIps() []netip.Addr {
rs.RLock()
defer rs.RUnlock()
ret := make([]netip.Addr, 0, len(rs.relays))
for ip := range rs.relays {
ret = append(ret, ip)
}
return ret
}
func (rs *RelayState) CopyRelayForIps() []netip.Addr {
rs.RLock()
defer rs.RUnlock()
currentRelays := make([]netip.Addr, 0, len(rs.relayForByIp))
for relayIp := range rs.relayForByIp {
currentRelays = append(currentRelays, relayIp)
}
return currentRelays
}
func (rs *RelayState) CopyRelayForIdxs() []uint32 {
rs.RLock()
defer rs.RUnlock()
ret := make([]uint32, 0, len(rs.relayForByIdx))
for i := range rs.relayForByIdx {
ret = append(ret, i)
}
return ret
}
func (rs *RelayState) CompleteRelayByIP(vpnIp netip.Addr, remoteIdx uint32) bool {
rs.Lock()
defer rs.Unlock()
r, ok := rs.relayForByIp[vpnIp]
if !ok {
return false
}
newRelay := *r
newRelay.State = Established
newRelay.RemoteIndex = remoteIdx
rs.relayForByIdx[r.LocalIndex] = &newRelay
rs.relayForByIp[r.PeerIp] = &newRelay
return true
}
func (rs *RelayState) CompleteRelayByIdx(localIdx uint32, remoteIdx uint32) (*Relay, bool) {
rs.Lock()
defer rs.Unlock()
r, ok := rs.relayForByIdx[localIdx]
if !ok {
return nil, false
}
newRelay := *r
newRelay.State = Established
newRelay.RemoteIndex = remoteIdx
rs.relayForByIdx[r.LocalIndex] = &newRelay
rs.relayForByIp[r.PeerIp] = &newRelay
return &newRelay, true
}
func (rs *RelayState) QueryRelayForByIp(vpnIp netip.Addr) (*Relay, bool) {
rs.RLock()
defer rs.RUnlock()
r, ok := rs.relayForByIp[vpnIp]
return r, ok
}
func (rs *RelayState) QueryRelayForByIdx(idx uint32) (*Relay, bool) {
rs.RLock()
defer rs.RUnlock()
r, ok := rs.relayForByIdx[idx]
return r, ok
}
func (rs *RelayState) InsertRelay(ip netip.Addr, idx uint32, r *Relay) {
rs.Lock()
defer rs.Unlock()
rs.relayForByIp[ip] = r
rs.relayForByIdx[idx] = r
}
2019-11-19 10:00:20 -07:00
type HostInfo struct {
remote netip.AddrPort
remotes *RemoteList
promoteCounter atomic.Uint32
ConnectionState *ConnectionState
remoteIndexId uint32
localIndexId uint32
vpnIp netip.Addr
recvError atomic.Uint32
remoteCidr *bart.Table[struct{}]
relayState RelayState
// HandshakePacket records the packets used to create this hostinfo
// We need these to avoid replayed handshake packets creating new hostinfos which causes churn
HandshakePacket map[uint8][]byte
2019-11-19 10:00:20 -07:00
// nextLHQuery is the earliest we can ask the lighthouse for new information.
// This is used to limit lighthouse re-queries in chatty clients
nextLHQuery atomic.Int64
// lastRebindCount is the other side of Interface.rebindCount, if these values don't match then we need to ask LH
// for a punch from the remote end of this tunnel. The goal being to prime their conntrack for our traffic just like
// with a handshake
lastRebindCount int8
// lastHandshakeTime records the time the remote side told us about at the stage when the handshake was completed locally
// Stage 1 packet will contain it if I am a responder, stage 2 packet if I am an initiator
// This is used to avoid an attack where a handshake packet is replayed after some time
lastHandshakeTime uint64
2019-11-19 10:00:20 -07:00
lastRoam time.Time
lastRoamRemote netip.AddrPort
// Used to track other hostinfos for this vpn ip since only 1 can be primary
// Synchronised via hostmap lock and not the hostinfo lock.
next, prev *HostInfo
2019-11-19 10:00:20 -07:00
}
type ViaSender struct {
relayHI *HostInfo // relayHI is the host info object of the relay
remoteIdx uint32 // remoteIdx is the index included in the header of the received packet
relay *Relay // relay contains the rest of the relay information, including the PeerIP of the host trying to communicate with us.
}
2019-11-19 10:00:20 -07:00
type cachedPacket struct {
messageType header.MessageType
messageSubType header.MessageSubType
2019-11-19 10:00:20 -07:00
callback packetCallback
packet []byte
}
type packetCallback func(t header.MessageType, st header.MessageSubType, h *HostInfo, p, nb, out []byte)
2019-11-19 10:00:20 -07:00
type cachedPacketMetrics struct {
sent metrics.Counter
dropped metrics.Counter
}
func NewHostMapFromConfig(l *logrus.Logger, vpnCIDR netip.Prefix, c *config.C) *HostMap {
hm := newHostMap(l, vpnCIDR)
hm.reload(c, true)
c.RegisterReloadCallback(func(c *config.C) {
hm.reload(c, false)
})
l.WithField("network", hm.vpnCIDR.String()).
WithField("preferredRanges", hm.GetPreferredRanges()).
Info("Main HostMap created")
return hm
}
func newHostMap(l *logrus.Logger, vpnCIDR netip.Prefix) *HostMap {
return &HostMap{
Indexes: map[uint32]*HostInfo{},
Relays: map[uint32]*HostInfo{},
RemoteIndexes: map[uint32]*HostInfo{},
Hosts: map[netip.Addr]*HostInfo{},
vpnCIDR: vpnCIDR,
l: l,
}
}
func (hm *HostMap) reload(c *config.C, initial bool) {
if initial || c.HasChanged("preferred_ranges") {
var preferredRanges []netip.Prefix
rawPreferredRanges := c.GetStringSlice("preferred_ranges", []string{})
for _, rawPreferredRange := range rawPreferredRanges {
preferredRange, err := netip.ParsePrefix(rawPreferredRange)
if err != nil {
hm.l.WithError(err).WithField("range", rawPreferredRanges).Warn("Failed to parse preferred ranges, ignoring")
continue
}
preferredRanges = append(preferredRanges, preferredRange)
}
oldRanges := hm.preferredRanges.Swap(&preferredRanges)
if !initial {
hm.l.WithField("oldPreferredRanges", *oldRanges).WithField("newPreferredRanges", preferredRanges).Info("preferred_ranges changed")
}
2019-11-19 10:00:20 -07:00
}
}
// EmitStats reports host, index, and relay counts to the stats collection system
func (hm *HostMap) EmitStats() {
2019-11-19 10:00:20 -07:00
hm.RLock()
hostLen := len(hm.Hosts)
indexLen := len(hm.Indexes)
remoteIndexLen := len(hm.RemoteIndexes)
relaysLen := len(hm.Relays)
2019-11-19 10:00:20 -07:00
hm.RUnlock()
metrics.GetOrRegisterGauge("hostmap.main.hosts", nil).Update(int64(hostLen))
metrics.GetOrRegisterGauge("hostmap.main.indexes", nil).Update(int64(indexLen))
metrics.GetOrRegisterGauge("hostmap.main.remoteIndexes", nil).Update(int64(remoteIndexLen))
metrics.GetOrRegisterGauge("hostmap.main.relayIndexes", nil).Update(int64(relaysLen))
}
func (hm *HostMap) RemoveRelay(localIdx uint32) {
hm.Lock()
_, ok := hm.Relays[localIdx]
if !ok {
hm.Unlock()
return
}
delete(hm.Relays, localIdx)
hm.Unlock()
2019-11-19 10:00:20 -07:00
}
// DeleteHostInfo will fully unlink the hostinfo and return true if it was the final hostinfo for this vpn ip
func (hm *HostMap) DeleteHostInfo(hostinfo *HostInfo) bool {
// Delete the host itself, ensuring it's not modified anymore
hm.Lock()
// If we have a previous or next hostinfo then we are not the last one for this vpn ip
final := (hostinfo.next == nil && hostinfo.prev == nil)
hm.unlockedDeleteHostInfo(hostinfo)
hm.Unlock()
return final
}
func (hm *HostMap) MakePrimary(hostinfo *HostInfo) {
hm.Lock()
defer hm.Unlock()
hm.unlockedMakePrimary(hostinfo)
}
func (hm *HostMap) unlockedMakePrimary(hostinfo *HostInfo) {
oldHostinfo := hm.Hosts[hostinfo.vpnIp]
if oldHostinfo == hostinfo {
return
}
if hostinfo.prev != nil {
hostinfo.prev.next = hostinfo.next
}
if hostinfo.next != nil {
hostinfo.next.prev = hostinfo.prev
}
hm.Hosts[hostinfo.vpnIp] = hostinfo
if oldHostinfo == nil {
return
}
hostinfo.next = oldHostinfo
oldHostinfo.prev = hostinfo
hostinfo.prev = nil
}
func (hm *HostMap) unlockedDeleteHostInfo(hostinfo *HostInfo) {
primary, ok := hm.Hosts[hostinfo.vpnIp]
if ok && primary == hostinfo {
// The vpnIp pointer points to the same hostinfo as the local index id, we can remove it
delete(hm.Hosts, hostinfo.vpnIp)
if len(hm.Hosts) == 0 {
hm.Hosts = map[netip.Addr]*HostInfo{}
}
if hostinfo.next != nil {
// We had more than 1 hostinfo at this vpnip, promote the next in the list to primary
hm.Hosts[hostinfo.vpnIp] = hostinfo.next
// It is primary, there is no previous hostinfo now
hostinfo.next.prev = nil
}
} else {
// Relink if we were in the middle of multiple hostinfos for this vpn ip
if hostinfo.prev != nil {
hostinfo.prev.next = hostinfo.next
}
if hostinfo.next != nil {
hostinfo.next.prev = hostinfo.prev
}
}
hostinfo.next = nil
hostinfo.prev = nil
// The remote index uses index ids outside our control so lets make sure we are only removing
// the remote index pointer here if it points to the hostinfo we are deleting
hostinfo2, ok := hm.RemoteIndexes[hostinfo.remoteIndexId]
if ok && hostinfo2 == hostinfo {
delete(hm.RemoteIndexes, hostinfo.remoteIndexId)
if len(hm.RemoteIndexes) == 0 {
hm.RemoteIndexes = map[uint32]*HostInfo{}
}
}
delete(hm.Indexes, hostinfo.localIndexId)
if len(hm.Indexes) == 0 {
hm.Indexes = map[uint32]*HostInfo{}
}
2021-03-26 08:46:30 -06:00
if hm.l.Level >= logrus.DebugLevel {
hm.l.WithField("hostMap", m{"mapTotalSize": len(hm.Hosts),
"vpnIp": hostinfo.vpnIp, "indexNumber": hostinfo.localIndexId, "remoteIndexNumber": hostinfo.remoteIndexId}).
Debug("Hostmap hostInfo deleted")
}
for _, localRelayIdx := range hostinfo.relayState.CopyRelayForIdxs() {
delete(hm.Relays, localRelayIdx)
}
}
func (hm *HostMap) QueryIndex(index uint32) *HostInfo {
2019-11-19 10:00:20 -07:00
hm.RLock()
if h, ok := hm.Indexes[index]; ok {
hm.RUnlock()
return h
2019-11-19 10:00:20 -07:00
} else {
hm.RUnlock()
return nil
2019-11-19 10:00:20 -07:00
}
}
func (hm *HostMap) QueryRelayIndex(index uint32) *HostInfo {
hm.RLock()
if h, ok := hm.Relays[index]; ok {
hm.RUnlock()
return h
} else {
hm.RUnlock()
return nil
}
}
2019-11-19 10:00:20 -07:00
func (hm *HostMap) QueryReverseIndex(index uint32) *HostInfo {
2019-11-19 10:00:20 -07:00
hm.RLock()
if h, ok := hm.RemoteIndexes[index]; ok {
hm.RUnlock()
return h
} else {
hm.RUnlock()
return nil
2019-11-19 10:00:20 -07:00
}
}
func (hm *HostMap) QueryVpnIp(vpnIp netip.Addr) *HostInfo {
return hm.queryVpnIp(vpnIp, nil)
2019-11-19 10:00:20 -07:00
}
func (hm *HostMap) QueryVpnIpRelayFor(targetIp, relayHostIp netip.Addr) (*HostInfo, *Relay, error) {
hm.RLock()
defer hm.RUnlock()
h, ok := hm.Hosts[relayHostIp]
if !ok {
return nil, nil, errors.New("unable to find host")
}
for h != nil {
r, ok := h.relayState.QueryRelayForByIp(targetIp)
if ok && r.State == Established {
return h, r, nil
}
h = h.next
}
return nil, nil, errors.New("unable to find host with relay")
}
func (hm *HostMap) queryVpnIp(vpnIp netip.Addr, promoteIfce *Interface) *HostInfo {
2019-11-19 10:00:20 -07:00
hm.RLock()
if h, ok := hm.Hosts[vpnIp]; ok {
hm.RUnlock()
// Do not attempt promotion if you are a lighthouse
if promoteIfce != nil && !promoteIfce.lightHouse.amLighthouse {
h.TryPromoteBest(hm.GetPreferredRanges(), promoteIfce)
2019-11-19 10:00:20 -07:00
}
return h
2019-11-19 10:00:20 -07:00
}
hm.RUnlock()
return nil
2019-11-19 10:00:20 -07:00
}
// unlockedAddHostInfo assumes you have a write-lock and will add a hostinfo object to the hostmap Indexes and RemoteIndexes maps.
// If an entry exists for the Hosts table (vpnIp -> hostinfo) then the provided hostinfo will be made primary
func (hm *HostMap) unlockedAddHostInfo(hostinfo *HostInfo, f *Interface) {
if f.serveDns {
remoteCert := hostinfo.ConnectionState.peerCert
2024-10-10 17:00:22 -06:00
dnsR.Add(remoteCert.Certificate.Name()+".", remoteCert.Certificate.Networks()[0].Addr().String())
2019-11-19 10:00:20 -07:00
}
existing := hm.Hosts[hostinfo.vpnIp]
hm.Hosts[hostinfo.vpnIp] = hostinfo
if existing != nil {
hostinfo.next = existing
existing.prev = hostinfo
}
hm.Indexes[hostinfo.localIndexId] = hostinfo
hm.RemoteIndexes[hostinfo.remoteIndexId] = hostinfo
2019-11-19 10:00:20 -07:00
2021-03-26 08:46:30 -06:00
if hm.l.Level >= logrus.DebugLevel {
hm.l.WithField("hostMap", m{"vpnIp": hostinfo.vpnIp, "mapTotalSize": len(hm.Hosts),
"hostinfo": m{"existing": true, "localIndexId": hostinfo.localIndexId, "hostId": hostinfo.vpnIp}}).
Debug("Hostmap vpnIp added")
2019-11-19 10:00:20 -07:00
}
i := 1
check := hostinfo
for check != nil {
if i > MaxHostInfosPerVpnIp {
hm.unlockedDeleteHostInfo(check)
}
check = check.next
i++
}
2019-11-19 10:00:20 -07:00
}
func (hm *HostMap) GetPreferredRanges() []netip.Prefix {
//NOTE: if preferredRanges is ever not stored before a load this will fail to dereference a nil pointer
return *hm.preferredRanges.Load()
}
func (hm *HostMap) ForEachVpnIp(f controlEach) {
hm.RLock()
defer hm.RUnlock()
for _, v := range hm.Hosts {
f(v)
}
}
func (hm *HostMap) ForEachIndex(f controlEach) {
hm.RLock()
defer hm.RUnlock()
for _, v := range hm.Indexes {
f(v)
}
}
// TryPromoteBest handles re-querying lighthouses and probing for better paths
// NOTE: It is an error to call this if you are a lighthouse since they should not roam clients!
func (i *HostInfo) TryPromoteBest(preferredRanges []netip.Prefix, ifce *Interface) {
c := i.promoteCounter.Add(1)
if c%ifce.tryPromoteEvery.Load() == 0 {
remote := i.remote
2019-11-19 10:00:20 -07:00
// return early if we are already on a preferred remote
if remote.IsValid() {
rIP := remote.Addr()
for _, l := range preferredRanges {
if l.Contains(rIP) {
return
}
2019-11-19 10:00:20 -07:00
}
}
i.remotes.ForEach(preferredRanges, func(addr netip.AddrPort, preferred bool) {
if remote.IsValid() && (!addr.IsValid() || !preferred) {
return
}
2019-11-19 10:00:20 -07:00
// Try to send a test packet to that host, this should
// cause it to detect a roaming event and switch remotes
ifce.sendTo(header.Test, header.TestRequest, i.ConnectionState, i, addr, []byte(""), make([]byte, 12, 12), make([]byte, mtu))
})
2019-11-19 10:00:20 -07:00
}
// Re query our lighthouses for new remotes occasionally
if c%ifce.reQueryEvery.Load() == 0 && ifce.lightHouse != nil {
now := time.Now().UnixNano()
if now < i.nextLHQuery.Load() {
return
}
i.nextLHQuery.Store(now + ifce.reQueryWait.Load())
ifce.lightHouse.QueryServer(i.vpnIp)
2019-11-19 10:00:20 -07:00
}
}
2024-10-10 17:00:22 -06:00
func (i *HostInfo) GetCert() *cert.CachedCertificate {
2019-11-19 10:00:20 -07:00
if i.ConnectionState != nil {
return i.ConnectionState.peerCert
}
return nil
}
func (i *HostInfo) SetRemote(remote netip.AddrPort) {
// We copy here because we likely got this remote from a source that reuses the object
if i.remote != remote {
i.remote = remote
i.remotes.LearnRemote(i.vpnIp, remote)
2021-03-31 09:26:35 -06:00
}
2019-11-19 10:00:20 -07:00
}
// SetRemoteIfPreferred returns true if the remote was changed. The lastRoam
// time on the HostInfo will also be updated.
func (i *HostInfo) SetRemoteIfPreferred(hm *HostMap, newRemote netip.AddrPort) bool {
if !newRemote.IsValid() {
// relays have nil udp Addrs
return false
}
currentRemote := i.remote
if !currentRemote.IsValid() {
i.SetRemote(newRemote)
return true
}
// NOTE: We do this loop here instead of calling `isPreferred` in
// remote_list.go so that we only have to loop over preferredRanges once.
newIsPreferred := false
for _, l := range hm.GetPreferredRanges() {
// return early if we are already on a preferred remote
if l.Contains(currentRemote.Addr()) {
return false
}
if l.Contains(newRemote.Addr()) {
newIsPreferred = true
}
}
if newIsPreferred {
// Consider this a roaming event
i.lastRoam = time.Now()
i.lastRoamRemote = currentRemote
i.SetRemote(newRemote)
return true
}
return false
}
2019-11-19 10:00:20 -07:00
func (i *HostInfo) RecvErrorExceeded() bool {
if i.recvError.Add(1) >= maxRecvError {
return true
2019-11-19 10:00:20 -07:00
}
return true
}
2024-10-10 17:00:22 -06:00
func (i *HostInfo) CreateRemoteCIDR(c cert.Certificate) {
if len(c.Networks()) == 1 && len(c.UnsafeNetworks()) == 0 {
// Simple case, no CIDRTree needed
return
}
remoteCidr := new(bart.Table[struct{}])
2024-10-10 17:00:22 -06:00
for _, network := range c.Networks() {
remoteCidr.Insert(network, struct{}{})
2019-12-12 09:34:17 -07:00
}
2024-10-10 17:00:22 -06:00
for _, network := range c.UnsafeNetworks() {
remoteCidr.Insert(network, struct{}{})
2019-12-12 09:34:17 -07:00
}
i.remoteCidr = remoteCidr
}
2021-03-26 08:46:30 -06:00
func (i *HostInfo) logger(l *logrus.Logger) *logrus.Entry {
if i == nil {
return logrus.NewEntry(l)
}
li := l.WithField("vpnIp", i.vpnIp).
WithField("localIndex", i.localIndexId).
WithField("remoteIndex", i.remoteIndexId)
if connState := i.ConnectionState; connState != nil {
if peerCert := connState.peerCert; peerCert != nil {
2024-10-10 17:00:22 -06:00
li = li.WithField("certName", peerCert.Certificate.Name())
}
}
return li
}
2019-11-19 10:00:20 -07:00
// Utility functions
func localIps(l *logrus.Logger, allowList *LocalAllowList) []netip.Addr {
2019-11-19 10:00:20 -07:00
//FIXME: This function is pretty garbage
var ips []netip.Addr
2019-11-19 10:00:20 -07:00
ifaces, _ := net.Interfaces()
for _, i := range ifaces {
Add lighthouse.{remoteAllowList,localAllowList} (#217) These settings make it possible to blacklist / whitelist IP addresses that are used for remote connections. `lighthouse.remoteAllowList` filters which remote IPs are allow when fetching from the lighthouse (or, if you are the lighthouse, which IPs you store and forward to querying hosts). By default, any remote IPs are allowed. You can provide CIDRs here with `true` to allow and `false` to deny. The most specific CIDR rule applies to each remote. If all rules are "allow", the default will be "deny", and vice-versa. If both "allow" and "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the default. lighthouse: remoteAllowList: # Example to block IPs from this subnet from being used for remote IPs. "172.16.0.0/12": false # A more complicated example, allow public IPs but only private IPs from a specific subnet "0.0.0.0/0": true "10.0.0.0/8": false "10.42.42.0/24": true `lighthouse.localAllowList` has the same logic as above, but it applies to the local addresses we advertise to the lighthouse. Additionally, you can specify an `interfaces` map of regular expressions to match against interface names. The regexp must match the entire name. All interface rules must be either true or false (and the default rule will be the inverse). CIDR rules are matched after interface name rules. Default is all local IP addresses. lighthouse: localAllowList: # Example to blacklist docker interfaces. interfaces: 'docker.*': false # Example to only advertise IPs in this subnet to the lighthouse. "10.0.0.0/8": true
2020-04-08 13:36:43 -06:00
allow := allowList.AllowName(i.Name)
2021-03-31 09:26:35 -06:00
if l.Level >= logrus.TraceLevel {
l.WithField("interfaceName", i.Name).WithField("allow", allow).Trace("localAllowList.AllowName")
}
Add lighthouse.{remoteAllowList,localAllowList} (#217) These settings make it possible to blacklist / whitelist IP addresses that are used for remote connections. `lighthouse.remoteAllowList` filters which remote IPs are allow when fetching from the lighthouse (or, if you are the lighthouse, which IPs you store and forward to querying hosts). By default, any remote IPs are allowed. You can provide CIDRs here with `true` to allow and `false` to deny. The most specific CIDR rule applies to each remote. If all rules are "allow", the default will be "deny", and vice-versa. If both "allow" and "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the default. lighthouse: remoteAllowList: # Example to block IPs from this subnet from being used for remote IPs. "172.16.0.0/12": false # A more complicated example, allow public IPs but only private IPs from a specific subnet "0.0.0.0/0": true "10.0.0.0/8": false "10.42.42.0/24": true `lighthouse.localAllowList` has the same logic as above, but it applies to the local addresses we advertise to the lighthouse. Additionally, you can specify an `interfaces` map of regular expressions to match against interface names. The regexp must match the entire name. All interface rules must be either true or false (and the default rule will be the inverse). CIDR rules are matched after interface name rules. Default is all local IP addresses. lighthouse: localAllowList: # Example to blacklist docker interfaces. interfaces: 'docker.*': false # Example to only advertise IPs in this subnet to the lighthouse. "10.0.0.0/8": true
2020-04-08 13:36:43 -06:00
if !allow {
continue
}
2019-11-19 10:00:20 -07:00
addrs, _ := i.Addrs()
for _, addr := range addrs {
var ip net.IP
switch v := addr.(type) {
case *net.IPNet:
//continue
ip = v.IP
case *net.IPAddr:
ip = v.IP
}
2021-03-18 19:37:24 -06:00
nip, ok := netip.AddrFromSlice(ip)
if !ok {
if l.Level >= logrus.DebugLevel {
l.WithField("localIp", ip).Debug("ip was invalid for netip")
}
continue
}
nip = nip.Unmap()
2021-03-18 19:37:24 -06:00
//TODO: Filtering out link local for now, this is probably the most correct thing
//TODO: Would be nice to filter out SLAAC MAC based ips as well
if nip.IsLoopback() == false && nip.IsLinkLocalUnicast() == false {
allow := allowList.Allow(nip)
2021-03-31 09:26:35 -06:00
if l.Level >= logrus.TraceLevel {
l.WithField("localIp", nip).WithField("allow", allow).Trace("localAllowList.Allow")
2021-03-31 09:26:35 -06:00
}
Add lighthouse.{remoteAllowList,localAllowList} (#217) These settings make it possible to blacklist / whitelist IP addresses that are used for remote connections. `lighthouse.remoteAllowList` filters which remote IPs are allow when fetching from the lighthouse (or, if you are the lighthouse, which IPs you store and forward to querying hosts). By default, any remote IPs are allowed. You can provide CIDRs here with `true` to allow and `false` to deny. The most specific CIDR rule applies to each remote. If all rules are "allow", the default will be "deny", and vice-versa. If both "allow" and "deny" rules are present, then you MUST set a rule for "0.0.0.0/0" as the default. lighthouse: remoteAllowList: # Example to block IPs from this subnet from being used for remote IPs. "172.16.0.0/12": false # A more complicated example, allow public IPs but only private IPs from a specific subnet "0.0.0.0/0": true "10.0.0.0/8": false "10.42.42.0/24": true `lighthouse.localAllowList` has the same logic as above, but it applies to the local addresses we advertise to the lighthouse. Additionally, you can specify an `interfaces` map of regular expressions to match against interface names. The regexp must match the entire name. All interface rules must be either true or false (and the default rule will be the inverse). CIDR rules are matched after interface name rules. Default is all local IP addresses. lighthouse: localAllowList: # Example to blacklist docker interfaces. interfaces: 'docker.*': false # Example to only advertise IPs in this subnet to the lighthouse. "10.0.0.0/8": true
2020-04-08 13:36:43 -06:00
if !allow {
continue
}
ips = append(ips, nip)
2019-11-19 10:00:20 -07:00
}
}
}
return ips
2019-11-19 10:00:20 -07:00
}