* add calculated_remotes
This setting allows us to "guess" what the remote might be for a host
while we wait for the lighthouse response. For networks that hard
designed with in mind, it can help speed up handshake performance, as well as
improve resiliency in the case that all lighthouses are down.
Example:
lighthouse:
# ...
calculated_remotes:
# For any Nebula IPs in 10.0.10.0/24, this will apply the mask and add
# the calculated IP as an initial remote (while we wait for the response
# from the lighthouse). Both CIDRs must have the same mask size.
# For example, Nebula IP 10.0.10.123 will have a calculated remote of
# 192.168.1.123
10.0.10.0/24:
- mask: 192.168.1.0/24
port: 4242
* figure out what is up with this test
* add test
* better logic for sending handshakes
Keep track of the last light of hosts we sent handshakes to. Only log
handshake sent messages if the list has changed.
Remove the test Test_NewHandshakeManagerTrigger because it is faulty and
makes no sense. It relys on the fact that no handshake packets actually
get sent, but with these changes we would send packets now (which it
should!)
* use atomic.Pointer
* cleanup to make it clearer
* fix typo in example
These new helpers make the code a lot cleaner. I confirmed that the
simple helpers like `atomic.Int64` don't add any extra overhead as they
get inlined by the compiler. `atomic.Pointer` adds an extra method call
as it no longer gets inlined, but we aren't using these on the hot path
so it is probably okay.
* don't set ConnectionState to nil
We might have packets processing in another thread, so we can't safely
just set this to nil. Since we removed it from the hostmaps, the next
packets to process should start the handshake over again.
I believe this comment is outdated or incorrect, since the next
handshake will start over with a new HostInfo, I don't think there is
any way a counter reuse could happen:
> We must null the connectionstate or a counter reuse may happen
Here is a panic we saw that I think is related:
panic: runtime error: invalid memory address or nil pointer dereference
[signal SIGSEGV: segmentation violation code=0x1 addr=0x20 pc=0x93a037]
goroutine 59 [running, locked to thread]:
github.com/slackhq/nebula.(*Firewall).Drop(...)
github.com/slackhq/nebula/firewall.go:380
github.com/slackhq/nebula.(*Interface).consumeInsidePacket(...)
github.com/slackhq/nebula/inside.go:59
github.com/slackhq/nebula.(*Interface).listenIn(...)
github.com/slackhq/nebula/interface.go:233
created by github.com/slackhq/nebula.(*Interface).run
github.com/slackhq/nebula/interface.go:191
* use closeTunnel
We have a few small race conditions with creating the HostInfo.ConnectionState
since we add the host info to the pendingHostMap before we set this
field. We can make everything a lot easier if we just add an "init"
function so that we can set this field in the hostinfo before we add it
to the hostmap.
This allows you to configure remote allow lists specific to different
subnets of the inside CIDR. Example:
remote_allow_ranges:
10.42.42.0/24:
192.168.0.0/16: true
This would only allow hosts with a VPN IP in the 10.42.42.0/24 range to
have private IPs (and thus don't connect over public IPs).
The PR also refactors AllowList into RemoteAllowList and LocalAllowList to make it clearer which methods are allowed on which allow list.
If we receive a handshake packet for a tunnel that has already been
completed, check to see if the new remote is preferred. If so, update to
the preferred remote and send a test packet to influence the other side
to do the same.
* Add more metrics
This change adds the following counter metrics:
Metrics to track packets dropped at the firewall:
firewall.dropped.local_ip
firewall.dropped.remote_ip
firewall.dropped.no_rule
Metrics to track handshakes attempts that have been initiated and ones
that have timed out (ones that have completed are tracked by the
existing "handshakes" histogram).
handshake_manager.initiated
handshake_manager.timed_out
Metrics to track when cached_packets are dropped because we run out of
buffer space, and how many are sent once the handshake completes.
hostinfo.cached_packets.dropped
hostinfo.cached_packets.sent
This change also notes how many cached packets we have when we log the
final "Handshake received" message for either stage1 for stage2.
* separate incoming/outgoing metrics
* remove "allowed" firewall metrics
We don't need this on the hotpath, they aren't worh it.
* don't need pointers here
This check was accidentally typo'd in #396 from `%` to `&`. Restore the
correct functionality here (we want to do the check every "PromoteEvery"
count packets).
There are some subtle race conditions with the previous handshake_ix implementation, mostly around collisions with localIndexId. This change refactors it so that we have a "commit" phase during the handshake where we grab the lock for the hostmap and ensure that we have a unique local index before storing it. We also now avoid using the pending hostmap at all for receiving stage1 packets, since we have everything we need to just store the completed handshake.
Co-authored-by: Nate Brown <nbrown.us@gmail.com>
Co-authored-by: Ryan Huber <rhuber@gmail.com>
Co-authored-by: forfuncsake <drussell@slack-corp.com>
This change fixes all of the known data races that `make smoke-docker-race` finds, except for one.
Most of these races are around the handshake phase for a hostinfo, so we add a RWLock to the hostinfo and Lock during each of the handshake stages.
Some of the other races are around consistently using `atomic` around the `messageCounter` field. To make this harder to mess up, I have renamed the field to `atomicMessageCounter` (I also removed the unnecessary extra pointer deference as we can just point directly to the struct field).
The last remaining data race is around reading `ConnectionInfo.ready`, which is a boolean that is only written to once when the handshake has finished. Due to it being in the hot path for packets and the rare case that this could actually be an issue, holding off on fixing that one for now.
here is the results of `make smoke-docker-race`:
before:
lighthouse1: Found 2 data race(s)
host2: Found 36 data race(s)
host3: Found 17 data race(s)
host4: Found 31 data race(s)
after:
host2: Found 1 data race(s)
host4: Found 1 data race(s)
Fixes: #147Fixes: #226Fixes: #283Fixes: #316
We are currently seeing some cases where we are not deleting entries
correctly from the pending hostmap. I believe this is a case of
an inbound timer tick firing and deleting the Hosts map entry for
a newer handshake attempt than intended, thus leaving the old Indexes
entry orphaned. This change adds some extra checking when deleteing from
the Indexes and Hosts maps to ensure we clean everything up correctly.
This change adds an index based on HostInfo.remoteIndexId. This allows
us to use HostMap.QueryReverseIndex without having to loop over all
entries in the map (this can be a bottleneck under high traffic
lighthouses).
Without this patch, a high traffic lighthouse server receiving recv_error
packets and lots of handshakes, cpu pprof trace can look like this:
flat flat% sum% cum cum%
2000ms 32.26% 32.26% 3040ms 49.03% github.com/slackhq/nebula.(*HostMap).QueryReverseIndex
870ms 14.03% 46.29% 1060ms 17.10% runtime.mapiternext
Which shows 50% of total cpu time is being spent in QueryReverseIndex.
This change add more metrics around "meta" (non "message" type packets).
For lighthouse packets, we also record statistics around the specific
lighthouse meta type.
We don't keep statistics for the "message" type so that we don't slow
down the fast path (and you can just look at metrics on the tun
interface to find that information).
These settings make it possible to blacklist / whitelist IP addresses
that are used for remote connections.
`lighthouse.remoteAllowList` filters which remote IPs are allow when
fetching from the lighthouse (or, if you are the lighthouse, which IPs
you store and forward to querying hosts). By default, any remote IPs are
allowed. You can provide CIDRs here with `true` to allow and `false` to
deny. The most specific CIDR rule applies to each remote. If all rules
are "allow", the default will be "deny", and vice-versa. If both "allow"
and "deny" rules are present, then you MUST set a rule for "0.0.0.0/0"
as the default.
lighthouse:
remoteAllowList:
# Example to block IPs from this subnet from being used for remote IPs.
"172.16.0.0/12": false
# A more complicated example, allow public IPs but only private IPs from a specific subnet
"0.0.0.0/0": true
"10.0.0.0/8": false
"10.42.42.0/24": true
`lighthouse.localAllowList` has the same logic as above, but it applies
to the local addresses we advertise to the lighthouse. Additionally, you
can specify an `interfaces` map of regular expressions to match against
interface names. The regexp must match the entire name. All interface
rules must be either true or false (and the default rule will be the
inverse). CIDR rules are matched after interface name rules.
Default is all local IP addresses.
lighthouse:
localAllowList:
# Example to blacklist docker interfaces.
interfaces:
'docker.*': false
# Example to only advertise IPs in this subnet to the lighthouse.
"10.0.0.0/8": true
This change adds a new helper, `(*HostInfo).logger()`, that starts a new
logrus.Entry with `vpnIp` and `certName`. We don't use the helper inside
of handshake_ix though since the certificate has not been attached to
the HostInfo yet.
Fixes: #84
A CIDRTree can be expensive to create, so only do it if we need
it. If the remote host only has one IP address and no subnets, just do
an exact IP match instead.
Fixes: #171
Nate Brown