Currently, if a packet arrives on the tun device with a destination that
is not a routable Nebula IP, `queryUnsafeRoute` converts that IP to
0.0.0.0 and we store that packet and try to look up that IP with the
lighthouse. This doesn't make any sense to do, if we get a packet that
is unroutable we should just drop it.
Note, we have a few configurable options like `drop_local_broadcast`
and `drop_multicast` which do this for a few specific types, but since
no packets like this will send correctly I think we should just drop
anything that is unroutable.
We are currently triggering a fast handshake for static hosts right
inside HandshakeManager.AddVpnIP, but this can actually trigger before
we have generated the handshake packet to use. Instead, we should be
triggering right after we call ixHandshakeStage0 in getOrHandshake
(which generates the handshake packet)
Currently, we drop the conntrack table when firewall rules change during a SIGHUP reload. This means responses to inflight HTTP requests can be dropped, among other issues. This change copies the conntrack table over to the new firewall (it holds the conntrack mutex lock during this process, to be safe).
This change also records which firewall rules hash each conntrack entry used, so that we can re-verify the rules after the new firewall has been loaded.
This commit updates the Interface.Inside type to be a new interface
type instead of a *Tun. This will allow for an inside interface
that does not use a tun device, such as a single-binary client that
can run without elevated privileges.
Currently, we wait until the next timer tick to act on the lighthouse's
reply to our HostQuery. This means we can easily add hundreds of
milliseconds of unnecessary delay to the handshake. To fix this, we
can introduce a channel to trigger an outbound handshake without waiting
for the next timer tick.
A few samples of cold ping time between two hosts that require a
lighthouse lookup:
before (v1.2.0):
time=156 ms
time=252 ms
time=12.6 ms
time=301 ms
time=352 ms
time=49.4 ms
time=150 ms
time=13.5 ms
time=8.24 ms
time=161 ms
time=355 ms
after:
time=3.53 ms
time=3.14 ms
time=3.08 ms
time=3.92 ms
time=7.78 ms
time=3.59 ms
time=3.07 ms
time=3.22 ms
time=3.12 ms
time=3.08 ms
time=8.04 ms
I recommend reviewing this PR by looking at each commit individually, as
some refactoring was required that makes the diff a bit confusing when
combined together.
* enforce the use of goimports
Instead of enforcing `gofmt`, enforce `goimports`, which also asserts
a separate section for non-builtin packages.
* run `goimports` everywhere
* exclude generated .pb.go files
If different mtus are specified for different routes, we should set
advmss on each route because Linux does a poor job of selecting the
default (from ip-route(8)):
advmss NUMBER (Linux 2.3.15+ only)
the MSS ('Maximal Segment Size') to advertise to these destinations when estab‐
lishing TCP connections. If it is not given, Linux uses a default value calcu‐
lated from the first hop device MTU. (If the path to these destination is asym‐
metric, this guess may be wrong.)
Note that the default value is calculated from the first hop *device
MTU*, not the *route MTU*. In practice this is usually ok as long as the
other side of the tunnel has the mtu configured exactly the same, but we
should probably just set advmss correctly on these routes.
Test that basic inbound / outbound firewall rules work during the smoke
test. This change sets an inbound firewall rule on host3, and a new
host4 with outbound firewall rules. It also tests that conntrack allows
packets once the connection has been established.
This makes GOARM more generic and does GOMIPS in a similar way to
support mips-softfloat. We also set `-ldflags "-s -w"` for
mips-softfloat to give the best chance of the binary working on these
small devices.
This change add more metrics around "meta" (non "message" type packets).
For lighthouse packets, we also record statistics around the specific
lighthouse meta type.
We don't keep statistics for the "message" type so that we don't slow
down the fast path (and you can just look at metrics on the tun
interface to find that information).
Add support for freebsd. You have to set `tun.dev` in your config. The second pass of this would be to remove the exec calls and use ioctl(2) and route(4) instead, but we can do that in a second PR.
Co-authored-by: Wade Simmons <wade@wades.im>
These settings make it possible to blacklist / whitelist IP addresses
that are used for remote connections.
`lighthouse.remoteAllowList` filters which remote IPs are allow when
fetching from the lighthouse (or, if you are the lighthouse, which IPs
you store and forward to querying hosts). By default, any remote IPs are
allowed. You can provide CIDRs here with `true` to allow and `false` to
deny. The most specific CIDR rule applies to each remote. If all rules
are "allow", the default will be "deny", and vice-versa. If both "allow"
and "deny" rules are present, then you MUST set a rule for "0.0.0.0/0"
as the default.
lighthouse:
remoteAllowList:
# Example to block IPs from this subnet from being used for remote IPs.
"172.16.0.0/12": false
# A more complicated example, allow public IPs but only private IPs from a specific subnet
"0.0.0.0/0": true
"10.0.0.0/8": false
"10.42.42.0/24": true
`lighthouse.localAllowList` has the same logic as above, but it applies
to the local addresses we advertise to the lighthouse. Additionally, you
can specify an `interfaces` map of regular expressions to match against
interface names. The regexp must match the entire name. All interface
rules must be either true or false (and the default rule will be the
inverse). CIDR rules are matched after interface name rules.
Default is all local IP addresses.
lighthouse:
localAllowList:
# Example to blacklist docker interfaces.
interfaces:
'docker.*': false
# Example to only advertise IPs in this subnet to the lighthouse.
"10.0.0.0/8": true
* Better config test
Previously, when using the config test option `-test`, we quit fairly
earlier in the process and would not catch a variety of additional
parsing errors (such as lighthouse IP addresses, local_range, the new
check to make sure static hosts are in the certificate's subnet, etc).
* run config test as part of smoke test
* don't need privileges for configtest
Co-authored-by: Nathan Brown <nate@slack-corp.com>
This change adds a new helper, `(*HostInfo).logger()`, that starts a new
logrus.Entry with `vpnIp` and `certName`. We don't use the helper inside
of handshake_ix though since the certificate has not been attached to
the HostInfo yet.
Fixes: #84
* add configurable punching delay because of race-condition-y conntracks
* add changelog
* fix tests
* only do one punch per query
* Coalesce punchy config
* It is not is not set
* Add tests
Co-authored-by: Nate Brown <nbrown.us@gmail.com>
A CIDRTree can be expensive to create, so only do it if we need
it. If the remote host only has one IP address and no subnets, just do
an exact IP match instead.
Fixes: #171
This PR does two things:
- Only run the tests when relevant files change.
- Cache the Go Modules directory between runs, so they don't have to redownload everything everytime (go.sum is the cache key). Pretty much straight from the examples: https://github.com/actions/cache/blob/master/examples.md#go---modules
Currently, we require that config file names end with `.yml` or `.yaml`.
This is because if the user points `-config` at a directory of files, we
only want to use the YAML files in that directory.
But this makes it more difficult to use the `-test -config` option
because config management tools might not have an extension on the file
when preparing a new config file. This change makes it so that if you
point `-config file` directly at a file, it uses it no matter what the
extension is.
This change exposes the current constants we have defined for the handshake
manager as configuration options. This will allow us to test and tweak
with different intervals and wait rotations.
# Handshake Manger Settings
handshakes:
# Total time to try a handshake = sequence of `try_interval * retries`
# With 100ms interval and 20 retries it is 23.5 seconds
try_interval: 100ms
retries: 20
# wait_rotation is the number of handshake attempts to do before starting to try non-local IP addresses
wait_rotation: 5
This change introduces logging.timestamp_format, which allows
configuration of the Logrus TimestampFormat setting. The primary purpose
of this change was to allow logging with millisecond precision. The
default for `text` and `json` formats remains the same for backwards
compatibility.
timestamp format is specified in Go time format, see:
- https://golang.org/pkg/time/#pkg-constants
Default when `format: json`: "2006-01-02T15:04:05Z07:00" (RFC3339)
Default when `format: text`:
when TTY attached: seconds since beginning of execution
otherwise: "2006-01-02T15:04:05Z07:00" (RFC3339)
As an example, to log as RFC3339 with millisecond precision, set to:
logging:
timestamp_format: "2006-01-02T15:04:05.000Z07:00"
Validate all lighthouse.hosts and static_host_map VPN IPs are in the
subnet defined in our cert. Exit with a fatal error if they are not in
our subnet, as this is an invalid configuration (we will not have the
proper routes set up to communicate with these hosts).
This error case could occur for the following invalid example:
nebula-cert sign -name "lighthouse" -ip "10.0.1.1/24"
nebula-cert sign -name "host" -ip "10.0.2.1/24"
config.yaml:
static_host_map:
"10.0.1.1": ["lighthouse.local:4242"]
lighthouse:
hosts:
- "10.0.1.1"
We will now return a fatal error for this config, since `10.0.1.1` is
not in the host cert's subnet of `10.0.2.1/24`
This is the initial creation of a CHANGELOG. When we are ready to cut
a release we can change the version at the top and update the links at
the bottom.
* fix: nebula-cert duration is optional, so reflect this is the cli help
nebula-cert sign defaults the duration flag to 1 second before the CA expires, so it is not required to be provided.
* tests: Fix test for duration flag help message
* nebula-cert: add duration default value hint
forfuncsake