synapse-old/synapse/config/ratelimiting.py

# Copyright 2014-2016 OpenMarket Ltd
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

from typing import Any, Dict, Optional, cast

import attr

from synapse.types import JsonDict

from ._base import Config


@attr.s(slots=True, frozen=True, auto_attribs=True)
class RatelimitSettings:
    key: str
    per_second: float
    burst_count: int

    @classmethod
    def parse(
        cls,
        config: Dict[str, Any],
        key: str,
        defaults: Optional[Dict[str, float]] = None,
    ) -> "RatelimitSettings":
        """Parse config[key] as a new-style rate limiter config.

        The key may refer to a nested dictionary using a full stop (.) to separate
        each nested key. For example, use the key "a.b.c" to parse the following:

        a:
          b:
            c:
              per_second: 10
              burst_count: 200

        If this lookup fails, we'll fallback to the defaults.
        """
        defaults = defaults or {"per_second": 0.17, "burst_count": 3.0}

        rl_config = config
        for part in key.split("."):
            rl_config = rl_config.get(part, {})

        # By this point we should have hit the rate limiter parameters.
        # We don't actually check this though!
        rl_config = cast(Dict[str, float], rl_config)

        return cls(
            key=key,
            per_second=rl_config.get("per_second", defaults["per_second"]),
            burst_count=int(rl_config.get("burst_count", defaults["burst_count"])),
        )


@attr.s(auto_attribs=True)
class FederationRatelimitSettings:
    window_size: int = 1000
    sleep_limit: int = 10
    sleep_delay: int = 500
    reject_limit: int = 50
    concurrent: int = 3


class RatelimitConfig(Config):
    section = "ratelimiting"

    def read_config(self, config: JsonDict, **kwargs: Any) -> None:
        # Load the new-style messages config if it exists. Otherwise fall back
        # to the old method.
        if "rc_message" in config:
            self.rc_message = RatelimitSettings.parse(
                config, "rc_message", defaults={"per_second": 0.2, "burst_count": 10.0}
            )
        else:
            self.rc_message = RatelimitSettings(
                key="rc_messages",
                per_second=config.get("rc_messages_per_second", 0.2),
                burst_count=config.get("rc_message_burst_count", 10.0),
            )

        # Load the new-style federation config, if it exists. Otherwise, fall
        # back to the old method.
        if "rc_federation" in config:
            self.rc_federation = FederationRatelimitSettings(**config["rc_federation"])
        else:
            self.rc_federation = FederationRatelimitSettings(
                **{
                    k: v
                    for k, v in {
                        "window_size": config.get("federation_rc_window_size"),
                        "sleep_limit": config.get("federation_rc_sleep_limit"),
                        "sleep_delay": config.get("federation_rc_sleep_delay"),
                        "reject_limit": config.get("federation_rc_reject_limit"),
                        "concurrent": config.get("federation_rc_concurrent"),
                    }.items()
                    if v is not None
                }
            )

        self.rc_registration = RatelimitSettings.parse(config, "rc_registration", {})

        self.rc_registration_token_validity = RatelimitSettings.parse(
            config,
            "rc_registration_token_validity",
            defaults={"per_second": 0.1, "burst_count": 5},
        )

        # It is reasonable to login with a bunch of devices at once (i.e. when
        # setting up an account), but it is *not* valid to continually be
        # logging into new devices.
        self.rc_login_address = RatelimitSettings.parse(
            config,
            "rc_login.address",
            defaults={"per_second": 0.003, "burst_count": 5},
        )
        self.rc_login_account = RatelimitSettings.parse(
            config,
            "rc_login.account",
            defaults={"per_second": 0.003, "burst_count": 5},
        )
        self.rc_login_failed_attempts = RatelimitSettings.parse(
            config,
            "rc_login.failed_attempts",
            {},
        )

        self.federation_rr_transactions_per_room_per_second = config.get(
            "federation_rr_transactions_per_room_per_second", 50
        )

        self.rc_admin_redaction = None
        if "rc_admin_redaction" in config:
            self.rc_admin_redaction = RatelimitSettings.parse(
                config, "rc_admin_redaction", {}
            )

        self.rc_joins_local = RatelimitSettings.parse(
            config,
            "rc_joins.local",
            defaults={"per_second": 0.1, "burst_count": 10},
        )
        self.rc_joins_remote = RatelimitSettings.parse(
            config,
            "rc_joins.remote",
            defaults={"per_second": 0.01, "burst_count": 10},
        )

        # Track the rate of joins to a given room. If there are too many, temporarily
        # prevent local joins and remote joins via this server.
        self.rc_joins_per_room = RatelimitSettings.parse(
            config,
            "rc_joins_per_room",
            defaults={"per_second": 1, "burst_count": 10},
        )

        # Ratelimit cross-user key requests:
        # * For local requests this is keyed by the sending device.
        # * For requests received over federation this is keyed by the origin.
        #
        # Note that this isn't exposed in the configuration as it is obscure.
        self.rc_key_requests = RatelimitSettings.parse(
            config,
            "rc_key_requests",
            defaults={"per_second": 20, "burst_count": 100},
        )

        self.rc_3pid_validation = RatelimitSettings.parse(
            config,
            "rc_3pid_validation",
            defaults={"per_second": 0.003, "burst_count": 5},
        )

        self.rc_invites_per_room = RatelimitSettings.parse(
            config,
            "rc_invites.per_room",
            defaults={"per_second": 0.3, "burst_count": 10},
        )
        self.rc_invites_per_user = RatelimitSettings.parse(
            config,
            "rc_invites.per_user",
            defaults={"per_second": 0.003, "burst_count": 5},
        )

        self.rc_invites_per_issuer = RatelimitSettings.parse(
            config,
            "rc_invites.per_issuer",
            defaults={"per_second": 0.3, "burst_count": 10},
        )

        self.rc_third_party_invite = RatelimitSettings.parse(
            config,
            "rc_third_party_invite",
            defaults={"per_second": 0.0025, "burst_count": 5},
        )

        # Ratelimit create media requests:
        self.rc_media_create = RatelimitSettings.parse(
            config,
            "rc_media_create",
            defaults={"per_second": 10, "burst_count": 50},
        )