This PR adds a common configuration section for all modules (see docs). These modules are then loaded at startup by the homeserver. Modules register their hooks and web resources using the new `register_[...]_callbacks` and `register_web_resource` methods of the module API.
Synapse can be quite memory intensive, and unless care is taken to tune
the GC thresholds it can end up thrashing, causing noticable performance
problems for large servers. We fix this by limiting how often we GC a
given generation, regardless of current counts/thresholds.
This does not help with the reverse problem where the thresholds are set
too high, but that should only happen in situations where they've been
manually configured.
Adds a `gc_min_seconds_between` config option to override the defaults.
Fixes#9890.
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
At the moment, if you'd like to share presence between local or remote users, those users must be sharing a room together. This isn't always the most convenient or useful situation though.
This PR adds a module to Synapse that will allow deployments to set up extra logic on where presence updates should be routed. The module must implement two methods, `get_users_for_states` and `get_interested_users`. These methods are given presence updates or user IDs and must return information that Synapse will use to grant passing presence updates around.
A method is additionally added to `ModuleApi` which allows triggering a set of users to receive the current, online presence information for all users they are considered interested in. This is the equivalent of that user receiving presence information during an initial sync.
The goal of this module is to be fairly generic and useful for a variety of applications, with hard requirements being:
* Sending state for a specific set or all known users to a defined set of local and remote users.
* The ability to trigger an initial sync for specific users, so they receive all current state.
In #75, bytecode was disabled (from a bit of FUD back in `python<2.4` days, according to dev chat), I think it's safe enough to enable it again.
Added in `__pycache__/` and `.pyc`/`.pyd` to `.gitignore`, to extra-insure compiled files don't get committed.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
* Split ShardedWorkerHandlingConfig
This is so that we have a type level understanding of when it is safe to
call `get_instance(..)` (as opposed to `should_handle(..)`).
* Remove special cases in ShardedWorkerHandlingConfig.
`ShardedWorkerHandlingConfig` tried to handle the various different ways
it was possible to configure federation senders and pushers. This led to
special cases that weren't hit during testing.
To fix this the handling of the different cases is moved from there and
`generic_worker` into the worker config class. This allows us to have
the logic in one place and allows the rest of the code to ignore the
different cases.
- Update black version to the latest
- Run black auto formatting over the codebase
- Run autoformatting according to [`docs/code_style.md
`](80d6dc9783/docs/code_style.md)
- Update `code_style.md` docs around installing black to use the correct version
Fixes#8966.
* Factor out build_synapse_client_resource_tree
Start a function which will mount resources common to all workers.
* Move sso init into build_synapse_client_resource_tree
... so that we don't have to do it for each worker
* Fix SSO-login-via-a-worker
Expose the SSO login endpoints on workers, like the documentation says.
* Update workers config for new endpoints
Add documentation for endpoints recently added (#8942, #9017, #9262)
* remove submit_token from workers endpoints list
this *doesn't* work on workers (yet).
* changelog
* Add a comment about the odd path for SAML2Resource
There are going to be a couple of paths to get to the final step of SSO reg, and I want the URL in the browser to consistent. So, let's move the final step onto a separate path, which we redirect to.
* synapse.app.base: only call gc.freeze() on CPython
gc.freeze() is an implementation detail of CPython garbage collector,
and notably does not exist on PyPy.
Rather than playing whack-a-mole and skipping the call when under PyPy,
simply restrict it to CPython because the whole gc module is
implementation-defined.
Signed-off-by: Ivan Shapovalov <intelfx@intelfx.name>
The idea here is that we will have an instance of OidcProvider for each
configured IdP, with OidcHandler just doing the marshalling of them.
For now it's still hardcoded with a single provider.
The final part (for now) of my work to implement a username picker in synapse itself. The idea is that we allow
`UsernameMappingProvider`s to return `localpart=None`, in which case, rather than redirecting the browser
back to the client, we redirect to a username-picker resource, which allows the user to enter a username.
We *then* complete the SSO flow (including doing the client permission checks).
The static resources for the username picker itself (in
https://github.com/matrix-org/synapse/tree/rav/username_picker/synapse/res/username_picker)
are essentially lifted wholesale from
https://github.com/matrix-org/matrix-synapse-saml-mozilla/tree/master/matrix_synapse_saml_mozilla/res.
As the comment says, we might want to think about making them customisable, but that can be a follow-up.
Fixes#8876.
The idea is that the parse_config method of extension modules can raise either a ConfigError or a JsonValidationError,
and it will be magically turned into a legible error message. There's a few components to it:
* Separating the "path" and the "message" parts of a ConfigError, so that we can fiddle with the path bit to turn it
into an absolute path.
* Generally improving the way ConfigErrors get printed.
* Passing in the config path to load_module so that it can wrap any exceptions that get caught appropriately.
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
We can get a SIGHUP at any point, including times where we are not in a
sane state. By deferring calling the handlers until the next reactor
tick we ensure that we don't get unexpected conflicts, e.g. trying to
flush logs from the signal handler while the code was in the process of
writing a log entry.
Fixes#8769.
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
This is so we can tell what is going on when things are taking a while to start up.
The main change here is to ensure that transactions that are created during startup get correctly logged like normal transactions.
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
By importing from canonicaljson the simplejson module was still being used
in some situations. After this change the std lib json is consistenty used
throughout Synapse.
Duplicating function signatures between server.py and server.pyi is
silly. This commit changes that by changing all `build_*` methods to
`get_*` methods and changing the `_make_dependency_method` to work work
as a descriptor that caches the produced value.
There are some changes in other files that were made to fix the typing
in server.py.
This has long been something I've wanted to do. Basically the `Daemonize` code
is both too flexible and not flexible enough, in that it offers a bunch of
features that we don't use (changing UID, closing FDs in the child, logging to
syslog) and doesn't offer a bunch that we could do with (redirecting stdout/err
to a file instead of /dev/null; having the parent not exit until the child is
running).
As a first step, I've lifted the Daemonize code and removed the bits we don't
use. This should be a non-functional change. Fixing everything else will come
later.
Handling of incoming typing stream updates from replication was not
hooked up on master, effecting set ups where typing was handled on a
different worker.
This is really only a problem if the master process is also handling
sync requests, which is unlikely for those that are at the stage of
moving typing off.
The other observable effect is that if a worker restarts or a
replication connect drops then the typing worker will issue a
`POSITION typing`, triggering master process to try and stream *all*
typing updates from position 0.
Fixes#7907
This ended up being a bit more invasive than I'd hoped for (not helped by
generic_worker duplicating some of the code from homeserver), but hopefully
it's an improvement.
The idea is that, rather than storing unstructured `dict`s in the config for
the listener configurations, we instead parse it into a structured
`ListenerConfig` object.
A couple of changes of significance:
* remove the `_last_ack < federation_position` condition, so that
updates will still be correctly processed after restart
* Correctly wire up send_federation_ack to the right class.
Andrew Morgan