I've seen a few errors which can only plausibly be explained by the calculated
event id for an event being different from the ID of the event in the
database. It should be cheap to check this, so let's do so and raise an
exception.
When configuring the return values of mocks, prefer awaitables from
`make_awaitable` over `defer.succeed`. `Deferred`s are only awaitable
once, so it is inappropriate for a mock to return the same `Deferred`
multiple times.
Also update `run_in_background` to support functions that return
arbitrary awaitables.
Signed-off-by: Sean Quah <seanq@element.io>
Multiple calls to `EventsWorkerStore._get_events_from_cache_or_db` can
reuse the same database fetch, which is initiated by the first call.
Ensure that cancelling the first call doesn't cancel the other calls
sharing the same database fetch.
Signed-off-by: Sean Quah <seanq@element.io>
When we join a room via the faster-joins mechanism, we end up with "partial
state" at some points on the event DAG. Many parts of the codebase need to
wait for the full state to load. So, we implement a mechanism to keep track of
which events have partial state, and wait for them to be fully-populated.
This is a first step in dealing with #7721.
The idea is basically that rather than calculating the full set of users a device list update needs to be sent to up front, we instead simply record the rooms the user was in at the time of the change. This will allow a few things:
1. we can defer calculating the set of remote servers that need to be poked about the change; and
2. during `/sync` and `/keys/changes` we can avoid also avoid calculating users who share rooms with other users, and instead just look at the rooms that have changed.
However, care needs to be taken to correctly handle server downgrades. As such this PR writes to both `device_lists_changes_in_room` and the `device_lists_outbound_pokes` table synchronously. In a future release we can then bump the database schema compat version to `69` and then we can assume that the new `device_lists_changes_in_room` exists and is handled.
There is a temporary option to disable writing to `device_lists_outbound_pokes` synchronously, allowing us to test the new code path does work (and by implication upgrading to a future release and downgrading to this one will work correctly).
Note: Ideally we'd do the calculation of room to servers on a worker (e.g. the background worker), but currently only master can write to the `device_list_outbound_pokes` table.
There are a bunch of places we call get_success on an immediate value, which is unnecessary. Let's rip them out, and remove the redundant functionality in get_success and friends.
Switching to a sequence means there's no need to track `last_txn` on the
AS state table to generate new TXN IDs. This also means that there is
no longer contention between the AS scheduler and AS handler on updates
to the `application_services_state` table, which will prevent serialization
errors during the complete AS txn transaction.
To handle cancellation, we ensure that `after_callback`s and
`exception_callback`s are always run, since the transaction will
complete on another thread regardless of cancellation.
We also wait until everything is done before releasing the
`CancelledError`, so that logging contexts won't get used after they
have been finished.
Signed-off-by: Sean Quah <seanq@element.io>
The unstable identifiers are still supported if the experimental configuration
flag is enabled. The unstable identifiers will be removed in a future release.
Don't attempt to add non-string `value`s to `event_search` and add a
background update to clear out bad rows from `event_search` when
using sqlite.
Signed-off-by: Sean Quah <seanq@element.io>
When the server leaves a room the `get_rooms_for_user` cache is not
correctly invalidated for the remote users in the room. This means that
subsequent calls to `get_rooms_for_user` for the remote users would
incorrectly include the room (it shouldn't be included because the
server no longer knows anything about the room).
* Make `get_auth_chain_ids` return a Set
It has a set internally, and a set is often useful where it gets used, so let's
avoid converting to an intermediate list.
* Minor refactors in `on_send_join_request`
A little bit of non-functional groundwork
* Implement MSC3706: partial state in /send_join response
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse 1.40.0 that caused Synapse to fail to process incoming federation traffic after handling a large amount of events in a v1 room. ([\#11806](https://github.com/matrix-org/synapse/issues/11806))
-----BEGIN PGP SIGNATURE-----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=Fpsa
-----END PGP SIGNATURE-----
Merge tag 'v1.51.0rc2' into develop
Synapse 1.51.0rc2 (2022-01-24)
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse 1.40.0 that caused Synapse to fail to process incoming federation traffic after handling a large amount of events in a v1 room. ([\#11806](https://github.com/matrix-org/synapse/issues/11806))
It had no users.
We have just taken the identity of a previous function but don't provide the same
behaviour, so we need to fix this in the next commit...
The previous fix for the ongoing event fetches counter
(8eec25a1d9) was both insufficient and
incorrect.
When the database is unreachable, `_do_fetch` never gets run and so
`_event_fetch_ongoing` is never decremented.
The previous fix also moved the `_event_fetch_ongoing` decrement outside
of the `_event_fetch_lock` which allowed race conditions to corrupt the
counter.
==============================
Bugfixes
--------
- Fix a bug introduced in 1.47.0rc1 which caused worker processes to not halt startup in the presence of outstanding database migrations. ([\#11346](https://github.com/matrix-org/synapse/issues/11346))
- Fix a bug introduced in 1.47.0rc1 which prevented the 'remove deleted devices from `device_inbox` column' background process from running when updating from a recent Synapse version. ([\#11303](https://github.com/matrix-org/synapse/issues/11303), [\#11353](https://github.com/matrix-org/synapse/issues/11353))
-----BEGIN PGP SIGNATURE-----
iQJHBAABCAAxFiEEgQG31Z317NrSMt0QiISIDS7+X/QFAmGTw7wTHGFuZHJld0Bh
bW9yZ2FuLnh5egAKCRCIhIgNLv5f9FUdD/9EgimhmOUuwcbNQS+zJJo6qhbnxngA
uOIWGhuoBq9vyZjx3s1mwRO/sCuBc6KRs2JYzhntfHwV6FCgkC0QJXPkrYO7mkbg
L/QsET3QYrWwClMN1y/j2/rstOqGtgrtg6pPgd9LiQH+LjdM+vzAyrgxJRyhk9Sx
7184Y9QpEt/6ApqFIbXZewP+zH1z1QyVeZ1WiuHsqhjcrrcpv1t8Rq0fv4FxgIVP
Tmy3T2uw0FeVoQIL8BnNVmRGbLjlSgpDfiXZTwuXGS/uLtTe1tnHf0QsKEK7XZxY
yUsRKQVDy76GW9AJuWKFXa9Voy5gkjLWnvMwHvr+B1WcJi/5cjz9lP2A0Bsm6vhQ
ivrktlhlw7O3x0EvrL1r4z2gRY4GXxyZKOBLRsY4AAIMblNR/e94SmK0rLoKIQn8
Rp50VV2B4cf3WLxoqHBpJh7CDFisth1nXMnETU3y0VgAYMg2+cxqVDawTSTH9v7Q
QeGI10QCMmeFwGoL6lyVJ+qhyUqFeFOqTrNqzigsiB1qule+w1fEEl7cvI+Om/QM
Wjkvw6fpOvUGBN1OOARL5Qnm4rjxa0Ld2vw5vugkGiDTV8P3TMJP1JFQ44IX2GKP
yGJH92ac0qy6vQ2za1gL/w/U3miNblHUIvAmpkaIIlvovQJH9dU5dMsxnvi+QZU+
Auyqh9rwiWiizA==
=iNww
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=c7gi
-----END PGP SIGNATURE-----
Merge tag 'v1.47.0rc3' into develop
Synapse 1.47.0rc3 (2021-11-16)
==============================
Bugfixes
--------
- Fix a bug introduced in 1.47.0rc1 which caused worker processes to not halt startup in the presence of outstanding database migrations. ([\#11346](https://github.com/matrix-org/synapse/issues/11346))
- Fix a bug introduced in 1.47.0rc1 which prevented the 'remove deleted devices from `device_inbox` column' background process from running when updating from a recent Synapse version. ([\#11303](https://github.com/matrix-org/synapse/issues/11303), [\#11353](https://github.com/matrix-org/synapse/issues/11353))
It already seems to pass mypy. I wonder what changed, given that it was
on the exclusion list. So this commit consists of me ensuring
`--disallow-untyped-defs` passes and a minor fixup to a function that
returned either `True` or `None`.
* change display names/avatar URLS to None if they contain null bytes
* add changelog
* add POC test, requested changes
* add a saner test and remove old one
* update test to verify that display name has been changed to None
* make test less fragile
The following scenarios would halt the user directory updater:
- user joins room
- user leaves room
- user present in room which switches from private to public, or vice versa.
for two classes of users:
- appservice senders
- users missing from the user table.
If this happened, the user directory would be stuck, unable to make forward progress.
Exclude both cases from the user directory, so that we ignore them.
Co-authored-by: Eric Eastwood <erice@element.io>
Co-authored-by: reivilibre <oliverw@matrix.org>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
This removes the magic allowing accessing configurable
variables directly from the config object. It is now required
that a specific configuration class is used (e.g. `config.foo`
must be replaced with `config.server.foo`).
Fix a long-standing bug where a batch of user directory changes would be
silently dropped if the server left a room early in the batch.
* Pull out `wait_for_background_update` in tests
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
There are two steps to rebuilding the user directory:
1. a scan over rooms, followed by
2. a scan over local users.
The former reads avatars and display names from the `room_memberships`
table and therefore contains potentially private avatars and
display names. The latter reads from the the `profiles` table which only
contains public data; moreover it will overwrite any private profiles
that the rooms scan may have written to the user directory. This means
that the rebuild could leak private user while the rebuild was in
progress, only to later cover up the leaks once the rebuild had completed.
This change skips over local users when writing user_directory rows
when scanning rooms. Doing so means that it'll take longer for a rebuild
to make local users searchable, which is unfortunate. I think a future
PR can improve this by swapping the order of the two steps above. (And
indeed there's more to do here, e.g. copying from `profiles` without
going via Python.)
Small tidy-ups while I'm here:
* Remove duplicated code from test_initial. This was meant to be pulled into `purge_and_rebuild_user_dir`.
* Move `is_public` before updating sharing tables. No functional change; it's still before the first read of `is_public`.
* Don't bother creating a set from dict keys. Slightly nicer and makes the code simpler.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse v1.40.0 where changing a user's display name or avatar in a restricted room would cause an authentication error. ([\#10933](https://github.com/matrix-org/synapse/issues/10933))
- Fix `/admin/whois/{user_id}` endpoint, which was broken in v1.44.0rc1. ([\#10968](https://github.com/matrix-org/synapse/issues/10968))
-----BEGIN PGP SIGNATURE-----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=HR3N
-----END PGP SIGNATURE-----
Merge tag 'v1.44.0rc3' into develop
Synapse 1.44.0rc3 (2021-10-04)
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse v1.40.0 where changing a user's display name or avatar in a restricted room would cause an authentication error. ([\#10933](https://github.com/matrix-org/synapse/issues/10933))
- Fix `/admin/whois/{user_id}` endpoint, which was broken in v1.44.0rc1. ([\#10968](https://github.com/matrix-org/synapse/issues/10968))
* Introduce `should_include_local_users_in_dir`
We exclude three kinds of local users from the user_directory tables. At
present we don't consistently exclude all three in the same places. This
commit introduces a new function to gather those exclusion conditions
together. Because we have to handle local and remote users in different
ways, I've made that function only consider the case of remote users.
It's the caller's responsibility to make the local versus remote
distinction clear and correct.
A test fixup is required. The test now hits a path which makes db
queries against the users table. The expected rows were missing, because
we were using a dummy user that hadn't actually been registered.
We also add new test cases to covert the exclusion logic.
----
By my reading this makes these changes:
* When an app service user registers or changes their profile, they will
_not_ be added to the user directory. (Previously only support and
deactivated users were excluded). This is consistent with the logic that
rebuilds the user directory. See also [the discussion
here](https://github.com/matrix-org/synapse/pull/10914#discussion_r716859548).
* When rebuilding the directory, exclude support and disabled users from
room sharing tables. Previously only appservice users were excluded.
* Exclude all three categories of local users when rebuilding the
directory. Previously `_populate_user_directory_process_users` didn't do
any exclusion.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Pull out GetUserDirectoryTables helper
* Don't rebuild the dir in tests that don't need it
In #10796 I changed registering a user to add directory entries under.
This means we don't have to force a directory regbuild in to tests of
the user directory search.
* Move test_initial to tests/storage
* Add type hints to both test_user_directory files
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
This avoids the overhead of searching through the various
configuration classes by directly referencing the class that
the attributes are in.
It also improves type hints since mypy can now resolve the
types of the configuration variables.
* add test to check if null code points are being inserted
* add logic to detect and replace null code points before insertion into db
* lints
* add license to test
* change approach to null substitution
* add type hint for SearchEntry
* Add changelog entry
Signed-off-by: H.Shay <shaysquared@gmail.com>
* updated changelog
* update chanelog message
* remove duplicate changelog
* Update synapse/storage/databases/main/events.py remove extra space
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* rename and move test file, update tests, delete old test file
* fix typo in comments
* update _find_highlights_in_postgres to replace null byte with space
* replace null byte in sqlite search insertion
* beef up and reorganize test for this pr
* update changelog
* add type hints and update docstring
* check db engine directly vs using env variable
* refactor tests to be less repetetive
* move rplace logic into seperate function
* requested changes
* Fix typo.
* Update synapse/storage/databases/main/search.py
Co-authored-by: reivilibre <olivier@librepush.net>
* Update changelog.d/10820.misc
Co-authored-by: Aaron Raimist <aaron@raim.ist>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: reivilibre <olivier@librepush.net>
Co-authored-by: Aaron Raimist <aaron@raim.ist>
Setting the value will help PostgreSQL free up memory by recycling
the connections in the connection pool.
Signed-off-by: Toni Spets <toni.spets@iki.fi>
Empirically, this helped my server considerably when handling gaps in Matrix HQ. The problem was that we would repeatedly call have_seen_events for the same set of (50K or so) auth_events, each of which would take many minutes to complete, even though it's only an index scan.
The hope here is that by moving all the schema files into synapse/storage/schema, it gets a bit easier for newcomers to navigate.
It certainly got easier for me to write a helpful README. There's more to do on that front, but I'll follow up with other PRs for that.
I went through and removed a bunch of cruft that was lying around for compatibility with old Python versions. This PR also will now prevent Synapse from starting unless you're running Python 3.6+.
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
Related: #8334
Deprecated in: #9429 - Synapse 1.28.0 (2021-02-25)
`GET /_synapse/admin/v1/users/<user_id>` has no
- unit tests
- documentation
API in v2 is available (#5925 - 12/2019, v1.7.0).
API is misleading. It expects `user_id` and returns a list of all users.
Signed-off-by: Dirk Klimpel dirk@klimpel.org
Unfortunately this doesn't test re-joining the room since
that requires having another homeserver to query over
federation, which isn't easily doable in unit tests.
- Update black version to the latest
- Run black auto formatting over the codebase
- Run autoformatting according to [`docs/code_style.md
`](80d6dc9783/docs/code_style.md)
- Update `code_style.md` docs around installing black to use the correct version
We do this by allowing a single iteration to process multiple rooms at a
time, as there are often a lot of really tiny rooms, which can massively
slow things down.
Replaces the `federation_ip_range_blacklist` configuration setting with an
`ip_range_blacklist` setting with wider scope. It now applies to:
* Federation
* Identity servers
* Push notifications
* Checking key validitity for third-party invite events
The old `federation_ip_range_blacklist` setting is still honored if present, but
with reduced scope (it only applies to federation and identity servers).
We do state res with unpersisted events when calculating the new current state of the room, so that should be the only thing impacted. I don't think this is tooooo big of a deal as:
1. the next time a state event happens in the room the current state should correct itself;
2. in the common case all the unpersisted events' auth events will be pulled in by other state, so will still return the correct result (or one which is sufficiently close to not affect the result); and
3. we mostly use the state at an event to do important operations, which isn't affected by this.
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
This allows trailing commas in multi-line arg lists.
Minor, but we might as well keep our formatting current with regard to
our minimum supported Python version.
Signed-off-by: Dan Callahan <danc@element.io>
David Robertson