This change fixes a rare bug where initial /syncs would fail with a
`KeyError` under the following circumstances:
1. A user fast joins a remote room.
2. The user is kicked from the room before the room's full state has
been synced.
3. A second local user fast joins the room.
4. Events are backfilled into the room with a higher topological
ordering than the original user's leave. They are assigned a
negative stream ordering. It's not clear how backfill happened here,
since it is expected to be equivalent to syncing the full state.
5. The second local user leaves the room before the room's full state
has been synced. The homeserver does not complete the sync.
6. The original user performs an initial /sync with lazy_load_members
enabled.
* Because they were kicked from the room, the room is included in
the /sync response even though the include_leave option is not
specified.
* To populate the room's timeline, `_load_filtered_recents` /
`get_recent_events_for_room` fetches events with a lower stream
ordering than the leave event and picks the ones with the highest
topological orderings (which are most recent). This captures the
backfilled events after the leave, since they have a negative
stream ordering. These events are filtered out of the timeline,
since the user was not in the room at the time and cannot view
them. The sync code ends up with an empty timeline for the room
that notably does not include the user's leave event.
This seems buggy, but at least we don't disclose events the user
isn't allowed to see.
* Normally, `compute_state_delta` would fetch the state at the
start and end of the room's timeline to generate the sync
response. Since the timeline is empty, it fetches the state at
`min(now, last event in the room)`, which corresponds with the
second user's leave. The state during the entirety of the second
user's membership does not include the membership for the first
user because of partial state.
This part is also questionable, since we are fetching state from
outside the bounds of the user's membership.
* `compute_state_delta` then tries and fails to find the user's
membership in the auth events of timeline events. Because there
is no timeline event whose auth events are expected to contain
the user's membership, a `KeyError` is raised.
Also contains a drive-by fix for a separate unlikely race condition.
Signed-off-by: Sean Quah <seanq@matrix.org>
This uses the specced /_matrix/app/v1/... paths instead of the
"legacy" paths. If the homeserver receives an error it will retry
using the legacy path.
* Add IReactorUNIX to ISynapseReactor type hint.
* Create listen_unix().
Two options, 'path' to the file and 'mode' of permissions(not umask, recommend 666 as default as
nginx/other reverse proxies write to it and it's setup as user www-data)
For the moment, leave the option to always create a PID lockfile turned on by default
* Create UnixListenerConfig and wire it up.
Rename ListenerConfig to TCPListenerConfig, then Union them together into ListenerConfig.
This spidered around a bit, but I think I got it all. Metrics and manhole have been placed
behind a conditional in case of accidental putting them onto a unix socket.
Use new helpers to get if a listener is configured for TLS, and to help create a site tag
for logging.
There are 2 TODO things in parse_listener_def() to finish up at a later point.
* Refactor SynapseRequest to handle logging correctly when using a unix socket.
This prevents an exception when an IP address can not be retrieved for a request.
* Make the 'Synapse now listening on Unix socket' log line a little prettier.
* No silent failures on generic workers when trying to use a unix socket with metrics or manhole.
* Inline variables in app/_base.py
* Update docstring for listen_unix() to remove reference to a hardcoded permission of 0o666 and add a few comments saying where the default IS declared.
* Disallow both a unix socket and a ip/port combo on the same listener resource
* Linting
* Changelog
* review: simplify how listen_unix returns(and get rid of a type: ignore)
* review: fix typo from ConfigError in app/homeserver.py
* review: roll conditional for http_options.tag into get_site_tag() helper(and add docstring)
* review: enhance the conditionals for checking if a port or path is valid, remove a TODO line
* review: Try updating comment in get_client_ip_if_available to clarify what is being retrieved and why
* Pretty up how 'Synapse now listening on Unix Socket' looks by decoding the byte string.
* review: In parse_listener_def(), raise ConfigError if neither socket_path nor port is declared(and fix a typo)
* Revert "Fix registering a device on an account with lots of devices (#15348)"
This reverts commit f0d8f66eaa.
* Revert "Delete stale non-e2e devices for users, take 3 (#15183)"
This reverts commit 78cdb72cd6.
Clean-up from adding the thread_id column, which was initially
null but backfilled with values. It is desirable to require it to now
be non-null.
In addition to altering this column to be non-null, we clean up
obsolete background jobs, indexes, and just-in-time updating
code.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for devices in addition
to any information stored in the Synapse database.
Previously, we would spin in a tight loop until
`update_state_for_partial_state_event` stopped raising
`FederationPullAttemptBackoffError`s. Replace the spinloop with a wait
until the backoff period has expired.
Signed-off-by: Sean Quah <seanq@matrix.org>
This should help reduce the number of devices e.g. simple bots the repeatedly login rack up.
We only delete non-e2e devices as they should be safe to delete, whereas if we delete e2e devices for a user we may accidentally break their ability to receive e2e keys for a message.
* Fix joining rooms you have been unbanned from
Since forever synapse did not allow you to join a room after you have
been unbanned from it over federation. This was not actually because of
the unban event not federating. Synapse simply used outdated state to
validate the join transition. This skips the validation if we are not in
the room and for that reason won't have the current room state.
Fixes#1563
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Add changelog
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
* Update changelog.d/15323.bugfix
---------
Signed-off-by: Nicolas Werner <nicolas.werner@hotmail.de>
Experimental support for MSC3983 is behind a configuration flag.
If enabled, for users which are exclusively owned by an application
service then the appservice will be queried for one-time keys *if*
there are none uploaded to Synapse.
This makes it so that we rely on the `device_id` to delete pushers on logout,
instead of relying on the `access_token_id`. This ensures we're not removing
pushers on token refresh, and prepares for a world without access token IDs
(also known as the OIDC).
This actually runs the `set_device_id_for_pushers` background update, which
was forgotten in #13831.
Note that for backwards compatibility it still deletes pushers based on the
`access_token` until the background update finishes.
Invalid mentions data received over the Client-Server API should
be rejected with a 400 error. This will hopefully stop clients from
sending invalid data, although does not help with data received
over federation.
* Add `event_stream_ordering` column to membership state tables
Specifically this adds the column to `current_state_events`,
`local_current_membership` and `room_memberships`. Each of these tables
is regularly joined with the `events` table to get the stream ordering
and denormalising this into each table will yield significant query
performance improvements once used.
* Make denormalised `event_stream_ordering` columns foreign keys
* Add comment in schema file explaining new denormalised columns
* Add triggers to enforce consistency of `event_stream_ordering` columns
* Re-order purge room tables to account for foreign keys
* Bump schema version to 75
Co-authored-by: David Robertson <david.m.robertson1@gmail.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
Additionally:
* Consistently use `freeze()` in test
---------
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: 6543 <6543@obermui.de>
* Have replication clients remove _INT_STREAM_POS
Suppose worker A makes an internal http request from worker B. B may
make changes that A later learns about over replication. We want A's
request to block until it has seen those changes—mainly to ensure A's
caches are invalidated promptly. This helps provide read-after-write
consistency, eliminating entire categories of races and test flakes.
To implement this, B includes a top-level field `_INT_STREAM_POS` in its
response JSON. Roughly speaking, the field's value tells A what to wait
for. But we weren't removing that internal field before A's request
completed!
Introduced in https://github.com/matrix-org/synapse/pull/14820.
Fixes#15308.
* Changelog
When a room is deleted in Synapse we remove the event forward
extremities in the room, so if (say a bot) tries to send a message into
the room we error out due to not being able to calculate prev events for
the new event *before* we check if the sender is in the room.
Fixes#8094
With Redis commands do not need to be re-issued by the main
process (they fan-out to all processes at once) and thus it is no
longer necessary to worry about them reflecting recursively forever.
* Scaffolding for background process to refresh profiles
* Add scaffolding for background process to refresh profiles for a given server
* Implement the code to select servers to refresh from
* Ensure we don't build up multiple looping calls
* Make `get_profile` able to respect backoffs
* Add logic for refreshing users
* When backing off, schedule a refresh when the backoff is over
* Wake up the background processes when we receive an interesting state event
* Add tests
* Newsfile
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
* Add comment about 1<<62
---------
Signed-off-by: Olivier Wilkinson (reivilibre) <oliverw@matrix.org>
Erik Johnston