Rearrange the comments to try to clarify them, and expand on what some of it
means.
Use a sensible default 'bind_addresses' setting.
For the insecure port, only bind to localhost, and enable x_forwarded, since
apparently it's for use behind a load-balancer.
* Handle listening for ACME requests on IPv6 addresses
the weird url-but-not-actually-a-url-string doesn't handle IPv6 addresses
without extra quoting. Building a string which you are about to parse again
seems like a weird choice. Let's just use listenTCP, which is consistent with
what we do elsewhere.
* Clean up the default ACME config
make it look a bit more consistent with everything else, and tweak the defaults
to listen on port 80.
* newsfile
If you use double-quotes here, you have to escape your backslashes. It's much
easier with single-quotes.
(Note that the existing double-backslashes are already interpreted by python's
""" parsing.)
This is leading to problems with people upgrading to clients that
support MSC1730 because people have this misconfigured, so try
to make the docs completely unambiguous.
This allows the OpenID userinfo endpoint to be active even if the
federation resource is not active. The OpenID userinfo endpoint
is called by integration managers to verify user actions using the
client API OpenID access token. Without this verification, the
integration manager cannot know that the access token is valid.
The OpenID userinfo endpoint will be loaded in the case that either
"federation" or "openid" resource is defined. The new "openid"
resource is defaulted to active in default configuration.
Signed-off-by: Jason Robinson <jasonr@matrix.org>
This implements both a SAML2 metadata endpoint (at
`/_matrix/saml2/metadata.xml`), and a SAML2 response receiver (at
`/_matrix/saml2/authn_response`). If the SAML2 response matches what's been
configured, we complete the SSO login flow by redirecting to the client url
(aka `RelayState` in SAML2 jargon) with a login token.
What we don't yet have is anything to build a SAML2 request and redirect the
user to the identity provider. That is left as an exercise for the reader.
* Rip out half-implemented m.login.saml2 support
This was implemented in an odd way that left most of the work to the client, in
a way that I really didn't understand. It's going to be a pain to maintain, so
let's start by ripping it out.
* drop undocumented dependency on dateutil
It turns out we were relying on dateutil being pulled in transitively by
pysaml2. There's no need for that bloat.
Broadly three things here:
* disable W504 which seems a bit whacko
* remove a bunch of `as e` expressions from exception handlers that don't use
them
* use `r""` for strings which include backslashes
Also, we don't use pep8 any more, so we can get rid of the duplicate config
there.
move the example email templates into the synapse package so that they can be
used as package data, which should mean that all of the packaging mechanisms
(pip, docker, debian, arch, etc) should now come with the example templates.
In order to grandfather in people who relied on the templates being in the old
place, check for that situation and fall back to using the defaults if the
templates directory does not exist.
This default config is parsed and used a base before the actual
config is overlaid, so with these values not commented out, the
code to detect when no turn params were set and refuse to generate
credentials was never firing because the dummy default was always set.
We need to do a bit more validation when we get a server name, but don't want
to be re-doing it all over the shop, so factor out a separate
parse_and_validate_server_name, and do the extra validation.
Also, use it to verify the server name in the config file.
======================================
Most notable change from v0.30.0 is to switch to python prometheus library to improve system
stats reporting. WARNING this changes a number of prometheus metrics in a
backwards-incompatible manner. For more details, see
`docs/metrics-howto.rst <docs/metrics-howto.rst#removal-of-deprecated-metrics--time-based-counters-becoming-histograms-in-0310>`_.
Bug Fixes:
* Fix metric documentation tables (PR #3341)
* Fix LaterGuage error handling (694968f)
* Fix replication metrics (b7e7fd2)
Changes in synapse v0.31.0-rc1 (2018-06-04)
==========================================
Features:
* Switch to the Python Prometheus library (PR #3256, #3274)
* Let users leave the server notice room after joining (PR #3287)
Changes:
* daily user type phone home stats (PR #3264)
* Use iter* methods for _filter_events_for_server (PR #3267)
* Docs on consent bits (PR #3268)
* Remove users from user directory on deactivate (PR #3277)
* Avoid sending consent notice to guest users (PR #3288)
* disable CPUMetrics if no /proc/self/stat (PR #3299)
* Add local and loopback IPv6 addresses to url_preview_ip_range_blacklist (PR #3312) Thanks to @thegcat!
* Consistently use six's iteritems and wrap lazy keys/values in list() if they're not meant to be lazy (PR #3307)
* Add private IPv6 addresses to example config for url preview blacklist (PR #3317) Thanks to @thegcat!
* Reduce stuck read-receipts: ignore depth when updating (PR #3318)
* Put python's logs into Trial when running unit tests (PR #3319)
Changes, python 3 migration:
* Replace some more comparisons with six (PR #3243) Thanks to @NotAFile!
* replace some iteritems with six (PR #3244) Thanks to @NotAFile!
* Add batch_iter to utils (PR #3245) Thanks to @NotAFile!
* use repr, not str (PR #3246) Thanks to @NotAFile!
* Misc Python3 fixes (PR #3247) Thanks to @NotAFile!
* Py3 storage/_base.py (PR #3278) Thanks to @NotAFile!
* more six iteritems (PR #3279) Thanks to @NotAFile!
* More Misc. py3 fixes (PR #3280) Thanks to @NotAFile!
* remaining isintance fixes (PR #3281) Thanks to @NotAFile!
* py3-ize state.py (PR #3283) Thanks to @NotAFile!
* extend tox testing for py3 to avoid regressions (PR #3302) Thanks to @krombel!
* use memoryview in py3 (PR #3303) Thanks to @NotAFile!
Bugs:
* Fix federation backfill bugs (PR #3261)
* federation: fix LaterGauge usage (PR #3328) Thanks to @intelfx!
-----BEGIN PGP SIGNATURE-----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=Mz9U
-----END PGP SIGNATURE-----
Merge tag 'v0.31.0'
Changes in synapse v0.31.0 (2018-06-06)
======================================
Most notable change from v0.30.0 is to switch to python prometheus library to improve system
stats reporting. WARNING this changes a number of prometheus metrics in a
backwards-incompatible manner. For more details, see
`docs/metrics-howto.rst <docs/metrics-howto.rst#removal-of-deprecated-metrics--time-based-counters-becoming-histograms-in-0310>`_.
Bug Fixes:
* Fix metric documentation tables (PR #3341)
* Fix LaterGuage error handling (694968f)
* Fix replication metrics (b7e7fd2)
Changes in synapse v0.31.0-rc1 (2018-06-04)
==========================================
Features:
* Switch to the Python Prometheus library (PR #3256, #3274)
* Let users leave the server notice room after joining (PR #3287)
Changes:
* daily user type phone home stats (PR #3264)
* Use iter* methods for _filter_events_for_server (PR #3267)
* Docs on consent bits (PR #3268)
* Remove users from user directory on deactivate (PR #3277)
* Avoid sending consent notice to guest users (PR #3288)
* disable CPUMetrics if no /proc/self/stat (PR #3299)
* Add local and loopback IPv6 addresses to url_preview_ip_range_blacklist (PR #3312) Thanks to @thegcat!
* Consistently use six's iteritems and wrap lazy keys/values in list() if they're not meant to be lazy (PR #3307)
* Add private IPv6 addresses to example config for url preview blacklist (PR #3317) Thanks to @thegcat!
* Reduce stuck read-receipts: ignore depth when updating (PR #3318)
* Put python's logs into Trial when running unit tests (PR #3319)
Changes, python 3 migration:
* Replace some more comparisons with six (PR #3243) Thanks to @NotAFile!
* replace some iteritems with six (PR #3244) Thanks to @NotAFile!
* Add batch_iter to utils (PR #3245) Thanks to @NotAFile!
* use repr, not str (PR #3246) Thanks to @NotAFile!
* Misc Python3 fixes (PR #3247) Thanks to @NotAFile!
* Py3 storage/_base.py (PR #3278) Thanks to @NotAFile!
* more six iteritems (PR #3279) Thanks to @NotAFile!
* More Misc. py3 fixes (PR #3280) Thanks to @NotAFile!
* remaining isintance fixes (PR #3281) Thanks to @NotAFile!
* py3-ize state.py (PR #3283) Thanks to @NotAFile!
* extend tox testing for py3 to avoid regressions (PR #3302) Thanks to @krombel!
* use memoryview in py3 (PR #3303) Thanks to @NotAFile!
Bugs:
* Fix federation backfill bugs (PR #3261)
* federation: fix LaterGauge usage (PR #3328) Thanks to @intelfx!
The added addresses are expected to be local or loopback addresses and
shouldn't be spidered for previews.
Signed-off-by: Felix Schäfer <felix@thegcat.net>
Server Notices use a special room which the user can't dismiss. They are
created on demand when some other bit of the code calls send_notice.
(This doesn't actually do much yet becuse we don't call send_notice anywhere)
Nothing written into it is encoded, so it makes little sense, but it
does break in python3 the way it was before.
The variable names were adjusted to be less misleading.
Signed-off-by: Adrian Tschira <nota@notafile.com>
Add federation_domain_whitelist
gives a way to restrict which domains your HS is allowed to federate with.
useful mainly for gracefully preventing a private but internet-connected HS from trying to federate to the wider public Matrix network
* [ ] split config options into allowed_local_3pids and registrations_require_3pid
* [ ] simplify and comment logic for picking registration flows
* [ ] fix docstring and move check_3pid_allowed into a new util module
* [ ] use check_3pid_allowed everywhere
@erikjohnston PTAL
lets homeservers specify a whitelist for 3PIDs that users are allowed to associate with.
Typically useful for stopping people from registering with non-work emails
... because these only really exist to confuse people nowadays.
Also bring log config more into line with the generated log config, by making `level_for_storage`
apply to the `synapse.storage.SQL` logger rather than `synapse.storage`.
Binding on 0.0.0.0 when :: is specified in the bind_addresses is now allowed.
This causes a warning explaining the behaviour.
Configuration changed to match.
See #2232
Signed-off-by: Silke Hofstra <silke@slxh.eu>
Most deployments are on Linux (or Mac OS), so this would actually bind
on both IPv4 and IPv6.
Resolves#1886.
Signed-off-by: Willem Mulder <willemmaster@hotmail.com>
Richard van der Hoff