We do state res with unpersisted events when calculating the new current state of the room, so that should be the only thing impacted. I don't think this is tooooo big of a deal as:
1. the next time a state event happens in the room the current state should correct itself;
2. in the common case all the unpersisted events' auth events will be pulled in by other state, so will still return the correct result (or one which is sufficiently close to not affect the result); and
3. we mostly use the state at an event to do important operations, which isn't affected by this.
Rather than using a single JsonResource, construct a resource tree, as we do in
the prod code, and allow testcases to add extra resources by overriding
`create_resource_dict`.
This was broken in #8801 when abstracting code shared with OIDC.
After this change both SAML and OIDC have a concept of
grandfathering users, but with different implementations.
This PR adds a `room_version` argument to the `RestHelper`'s `create_room_as` function for tests. I plan to use this for testing knocking, which currently uses an unstable room version.
The spec requires synapse to support `identifier` dicts for `m.login.password`
user-interactive auth, which it did not (instead, it required an undocumented
`user` parameter.)
To fix this properly, we need to pull the code that interprets `identifier`
into `AuthHandler.validate_login` so that it can be called from the UIA code.
Fixes#5665.
This PR adds a new config option to the `push` section of the homeserver config, `group_unread_count_by_room`. By default Synapse will group push notifications by room (so if you have 1000 unread messages, if they lie in 55 rooms, you'll see an unread count on your phone of 55).
However, it is also useful to be able to send out the true count of unread messages if desired. If `group_unread_count_by_room` is set to `false`, then with the above example, one would see an unread count of 1000 (email anyone?).
Checks that the localpart returned by mapping providers for SAML and
OIDC are valid before registering new users.
Extends the OIDC tests for existing users and invalid data.
* Consistently use room_id from federation request body
Some federation APIs have a redundant `room_id` path param (see
https://github.com/matrix-org/matrix-doc/issues/2330). We should make sure we
consistently use either the path param or the body param, and the body param is
easier.
* Kill off some references to "context"
Once upon a time, "rooms" were known as "contexts". I think this kills of the
last references to "contexts".
remove the stubbing out of `request.process`, so that `requestReceived` also renders the request via the appropriate resource.
Replace render() with a stub for now.
The root resource isn't necessarily a JsonResource, so rename this method
accordingly, and update a couple of test classes to use the method rather than
directly manipulating self.resource.
Where we want to render a request against a specific Resource, call the global
make_request() function rather than the one in HomeserverTestCase, allowing us
to pass in an appropriate `Site`.
I idly noticed that these lists were out of sync with each other, causing us to miss a table in a test case (`local_invites`). Let's consolidate this list instead to prevent this from happening in the future.
We do it this way round so that only the "owner" can delete the access token (i.e. `/logout/all` by the "owner" also deletes that token, but `/logout/all` by the "target user" doesn't).
A future PR will add an API for creating such a token.
When the target user and authenticated entity are different the `Processed request` log line will be logged with a: `{@admin:server as @bob:server} ...`. I'm not convinced by that format (especially since it adds spaces in there, making it harder to use `cut -d ' '` to chop off the start of log lines). Suggestions welcome.
This modifies the configuration of structured logging to be usable from
the standard Python logging configuration.
This also separates the formatting of logs from the transport allowing
JSON logs to files or standard logs to sockets.
This allows trailing commas in multi-line arg lists.
Minor, but we might as well keep our formatting current with regard to
our minimum supported Python version.
Signed-off-by: Dan Callahan <danc@element.io>
Split admin API for reported events in detail und list view.
API was introduced with #8217 in synapse v.1.21.0.
It makes the list (`GET /_synapse/admin/v1/event_reports`) less complex and provides a better overview.
The details can be queried with: `GET /_synapse/admin/v1/event_reports/<report_id>`.
It is similar to room and users API.
It is a kind of regression in `GET /_synapse/admin/v1/event_reports`. `event_json` was removed. But the api was introduced one version before and it is an admin API (not under spec).
Signed-off-by: Dirk Klimpel dirk@klimpel.org
#8567 started a span for every background process. This is good as it means all Synapse code that gets run should be in a span (unless in the sentinel logging context), but it means we generate about 15x the number of spans as we did previously.
This PR attempts to reduce that number by a) not starting one for send commands to Redis, and b) deferring starting background processes until after we're sure they're necessary.
I don't really know how much this will help.
* Limit AS transactions to 100 events
* Update changelog.d/8606.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Add tests
* Update synapse/appservice/scheduler.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Add `DeferredCache.get_immediate` method
A bunch of things that are currently calling `DeferredCache.get` are only
really interested in the result if it's completed. We can optimise and simplify
this case.
* Remove unused 'default' parameter to DeferredCache.get()
* another get_immediate instance
This implements a more standard API for instantiating a homeserver and
moves some of the dependency injection into the test suite.
More concretely this stops using `setattr` on all `kwargs` passed to `HomeServer`.
* Fix outbound federaion with multiple event persisters.
We incorrectly notified federation senders that the minimum persisted
stream position had advanced when we got an `RDATA` from an event
persister.
Notifying of federation senders already correctly happens in the
notifier, so we just delete the offending line.
* Change some interfaces to use RoomStreamToken.
By enforcing use of `RoomStreamTokens` we make it less likely that
people pass in random ints that they got from somewhere random.
Currently background proccesses stream the events stream use the "minimum persisted position" (i.e. `get_current_token()`) rather than the vector clock style tokens. This is broadly fine as it doesn't matter if the background processes lag a small amount. However, in extreme cases (i.e. SyTests) where we only write to one event persister the background processes will never make progress.
This PR changes it so that the `MultiWriterIDGenerator` keeps the current position of a given instance as up to date as possible (i.e using the latest token it sees if its not in the process of persisting anything), and then periodically announces that over replication. This then allows the "minimum persisted position" to advance, albeit with a small lag.
This could, very occasionally, cause:
```
tests.test_visibility.FilterEventsForServerTestCase.test_large_room
===============================================================================
[ERROR]
Traceback (most recent call last):
File "/src/tests/rest/media/v1/test_media_storage.py", line 86, in test_ensure_media_is_in_local_cache
self.wait_on_thread(x)
File "/src/tests/unittest.py", line 296, in wait_on_thread
self.reactor.advance(0.01)
File "/src/.tox/py35/lib/python3.5/site-packages/twisted/internet/task.py", line 826, in advance
self._sortCalls()
File "/src/.tox/py35/lib/python3.5/site-packages/twisted/internet/task.py", line 787, in _sortCalls
self.calls.sort(key=lambda a: a.getTime())
builtins.ValueError: list modified during sort
tests.rest.media.v1.test_media_storage.MediaStorageTests.test_ensure_media_is_in_local_cache
```
This PR allows Synapse modules making use of the `ModuleApi` to create and send non-membership events into a room. This can useful to have modules send messages, or change power levels in a room etc. Note that they must send event through a user that's already in the room.
The non-membership event limitation is currently arbitrary, as it's another chunk of work and not necessary at the moment.
We call `_update_stream_positions_table_txn` a lot, which is an UPSERT
that can conflict in `REPEATABLE READ` isolation level. Instead of doing
a transaction consisting of a single query we may as well run it outside
of a transaction.
Lots of different module apis is not easy to maintain.
Rather than adding yet another ModuleApi(hs, hs.get_auth_handler()) incantation, first add an hs.get_module_api() method and use it where possible.
* Optimise and test state fetching for 3p event rules
Getting all the events at once is much more efficient than getting them
individually
* Test that 3p event rules can modify events
PR #8292 tried to maintain backwards compat with modules which don't provide a
`check_visibility_can_be_modified` method, but the tests weren't being run,
and the check didn't work.
This PR allows `ThirdPartyEventRules` modules to view, manipulate and block changes to the state of whether a room is published in the public rooms directory.
While the idea of whether a room is in the public rooms list is not kept within an event in the room, `ThirdPartyEventRules` generally deal with controlling which modifications can happen to a room. Public rooms fits within that idea, even if its toggle state isn't controlled through a state event.
This is so we can tell what is going on when things are taking a while to start up.
The main change here is to ensure that transactions that are created during startup get correctly logged like normal transactions.
The idea is that in future tokens will encode a mapping of instance to position. However, we don't want to include the full instance name in the string representation, so instead we'll have a mapping between instance name and an immutable integer ID in the DB that we can use instead. We'll then do the lookup when we serialize/deserialize the token (we could alternatively pass around an `Instance` type that includes both the name and ID, but that turns out to be a lot more invasive).
This was a bit unweildy for what I wanted: in particular, I wanted to assign
each measurement straight into a bucket, rather than storing an intermediate
Counter which didn't do any bucketing at all.
I've replaced it with something that is hopefully a bit easier to use.
(I'm not entirely sure what the difference between a HistogramMetricFamily and
a GaugeHistogramMetricFamily is, but given our counters can go down as well as
up the latter *sounds* more accurate?)
* Fix table scan of events on worker startup.
This happened because we assumed "new" writers had an initial stream
position of 0, so the replication code tried to fetch all events written
by the instance between 0 and the current position.
Instead, set the initial position of new writers to the current
persisted up to position, on the assumption that new writers won't have
written anything before that point.
* Consider old writers coming back as "new".
Otherwise we'd try and fetch entries between the old stale token and the
current position, even though it won't have written any rows.
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Broken in https://github.com/matrix-org/synapse/pull/8275 and has yet to be put in a release. Fixes https://github.com/matrix-org/synapse/issues/8418.
`next_link` is an optional parameter. However, we were checking whether the `next_link` param was valid, even if it wasn't provided. In that case, `next_link` was `None`, which would clearly not be a valid URL.
This would prevent password reset and other operations if `next_link` was not provided, and the `next_link_domain_whitelist` config option was set.
* Remove `on_timeout_cancel` from `timeout_deferred`
The `on_timeout_cancel` param to `timeout_deferred` wasn't always called on a
timeout (in particular if the canceller raised an exception), so it was
unreliable. It was also only used in one place, and to be honest it's easier to
do what it does a different way.
* Fix handling of connection timeouts in outgoing http requests
Turns out that if we get a timeout during connection, then a different
exception is raised, which wasn't always handled correctly.
To fix it, catch the exception in SimpleHttpClient and turn it into a
RequestTimedOutError (which is already a documented exception).
Also add a description to RequestTimedOutError so that we can see which stage
it failed at.
* Fix incorrect handling of timeouts reading federation responses
This was trapping the wrong sort of TimeoutError, so was never being hit.
The effect was relatively minor, but we should fix this so that it does the
expected thing.
* Fix inconsistent handling of `timeout` param between methods
`get_json`, `put_json` and `delete_json` were applying a different timeout to
the response body to `post_json`; bring them in line and test.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
* Fix test_verify_json_objects_for_server_awaits_previous_requests
It turns out that this wasn't really testing what it thought it was testing
(in particular, `check_context` was turning failures into success, which was
making the tests pass even though it wasn't clear they should have been.
It was also somewhat overcomplex - we can test what it was trying to test
without mocking out perspectives servers.
* Fix warnings about finished logcontexts in the keyring
We need to make sure that we finish the key fetching magic before we run the
verifying code, to ensure that we don't mess up our logcontexts.
Co-authored-by: Benjamin Koch <bbbsnowball@gmail.com>
This adds configuration flags that will match a user to pre-existing users
when logging in via OpenID Connect. This is useful when switching to
an existing SSO system.
On startup `MultiWriteIdGenerator` fetches the maximum stream ID for
each instance from the table and uses that as its initial "current
position" for each writer. This is problematic as a) it involves either
a scan of events table or an index (neither of which is ideal), and b)
if rows are being persisted out of order elsewhere while the process
restarts then using the maximum stream ID is not correct. This could
theoretically lead to race conditions where e.g. events that are
persisted out of order are not sent down sync streams.
We fix this by creating a new table that tracks the current positions of
each writer to the stream, and update it each time we finish persisting
a new entry. This is a relatively small overhead when persisting events.
However for the cache invalidation stream this is a much bigger relative
overhead, so instead we note that for invalidation we don't actually
care about reliability over restarts (as there's no caches to
invalidate) and simply don't bother reading and writing to the new table
in that particular case.
The idea is to remove some of the places we pass around `int`, where it can represent one of two things:
1. the position of an event in the stream; or
2. a token that partitions the stream, used as part of the stream tokens.
The valid operations are then:
1. did a position happen before or after a token;
2. get all events that happened before or after a token; and
3. get all events between two tokens.
(Note that we don't want to allow other operations as we want to change the tokens to be vector clocks rather than simple ints)
Fixes: #8359
Trying to reactivate a user with the admin API (`PUT /_synapse/admin/v2/users/<user_name>`) causes an internal server error.
Seems to be a regression in #8033.
* Create a new function to verify that the length of a device name is
under a certain threshold.
* Refactor old code and tests to use said function.
* Verify device name length during registration of device
* Add a test for the above
Signed-off-by: Dionysis Grigoropoulos <dgrig@erethon.com>
Signed-off-by: Olivier Wilkinson (reivilibre) <olivier@librepush.net>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* Fix _set_destination_retry_timings
This came about because the code assumed that retry_interval
could not be NULL — which has been challenged by catch-up.
Add ability for ASes to /login using the `uk.half-shot.msc2778.login.application_service` login `type`.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
-----BEGIN PGP SIGNATURE-----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=e2T1
-----END PGP SIGNATURE-----
Merge tag 'v1.20.0rc3' into develop
Synapse 1.20.0rc3 (2020-09-11)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.20.0rc1 where the wrong exception was raised when invalid JSON data is encountered. ([\#8291](https://github.com/matrix-org/synapse/issues/8291))
Some Linux distros have begun disabling TLSv1.0 and TLSv1.1 by default
for security reasons, for example in Fedora 33 onwards:
https://fedoraproject.org/wiki/Changes/StrongCryptoSettings2
Use TLSv1.2 for the fake TLS servers created in the test suite, to avoid
failures due to OpenSSL disallowing TLSv1.0:
<twisted.python.failure.Failure OpenSSL.SSL.Error: [('SSL routines',
'ssl_choose_client_version', 'unsupported protocol')]>
Signed-off-by: Dan Callaghan <djc@djc.id.au>
This PR adds a confirmation step to resetting your user password between clicking the link in your email and your password actually being reset.
This is to better align our password reset flow with the industry standard of requiring a confirmation from the user after email validation.
If a file cannot be thumbnailed for some reason (e.g. the file is empty), then
catch the exception and convert it to a reasonable error message for the client.
`pusher_pool.on_new_notifications` expected a min and max stream ID, however that was not what we were passing in. Instead, let's just pass it the current max stream ID and have it track the last stream ID it got passed.
I believe that it mostly worked as we called the function for every event. However, it would break for events that got persisted out of order, i.e, that were persisted but the max stream ID wasn't incremented as not all preceding events had finished persisting, and push for that event would be delayed until another event got pushed to the effected users.
This is a config option ported over from DINUM's Sydent: https://github.com/matrix-org/sydent/pull/285
They've switched to validating 3PIDs via Synapse rather than Sydent, and would like to retain this functionality.
This original purpose for this change is phishing prevention. This solution could also potentially be replaced by a similar one to https://github.com/matrix-org/synapse/pull/8004, but across all `*/submit_token` endpoint.
This option may still be useful to enterprise even with that safeguard in place though, if they want to be absolutely sure that their employees don't follow links to other domains.
Fixes https://github.com/matrix-org/synapse/issues/8238
Alongside the delta file, some changes were also necessary to the codebase to remove references to the now defunct `populate_stats_process_rooms_2` background job. Thankfully the latter doesn't seem to have made it into any documentation yet :)
* Add shared_rooms api
* Add changelog
* Add .
* Wrap response in {"rooms": }
* linting
* Add unstable_features key
* Remove options from isort that aren't part of 5.x
`-y` and `-rc` are now default behaviour and no longer exist.
`dont-skip` is no longer required
https://timothycrosley.github.io/isort/CHANGELOG/#500-penny-july-4-2020
* Update imports to make isort happy
* Add changelog
* Update tox.ini file with correct invocation
* fix linting again for isort
* Vendor prefix unstable API
* Fix to match spec
* import Codes
* import Codes
* Use FORBIDDEN
* Update changelog.d/7785.feature
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Implement get_shared_rooms_for_users
* a comma
* trailing whitespace
* Handle the easy feedback
* Switch to using runInteraction
* Add tests
* Feedback
* Seperate unstable endpoint from v2
* Add upgrade node
* a line
* Fix style by adding a blank line at EOF.
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Tulir Asokan <tulir@maunium.net>
* Update synapse/storage/databases/main/user_directory.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Update UPGRADE.rst
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Fix UPGRADE/CHANGELOG unstable paths
unstable unstable unstable
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Tulir Asokan <tulir@maunium.net>
... and to show that it does something slightly different to
`_get_e2e_device_keys_txn`.
`include_all_devices` and `include_deleted_devices` were never used (and
`include_deleted_devices` was broken, since that would cause `None`s in the
result which were not handled in the loop below.
Add some typing too.
#8174 removed the `is_guest` parameter from `get_room_data`, at the same time that #8157 was merged using it, colliding together to break unit tests on develop.
This PR removes the `is_guest` parameter from the call in the broken test.
Uses the same changelog as #8174.
Small cleanup PR.
* Removed the unused `is_guest` argument
* Added a safeguard to a (currently) impossible code path, fixing static checking at the same time.
==============================
Bugfixes
--------
- Fix a bug introduced in v1.19.0 where appservices with ratelimiting disabled would still be ratelimited when joining rooms. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix a bug introduced in v1.19.0 that would cause e.g. profile updates to fail due to incorrect application of rate limits on join requests. ([\#8153](https://github.com/matrix-org/synapse/issues/8153))
-----BEGIN PGP SIGNATURE-----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=0rHM
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEdVkXOgzrGzds0jtrHgFcFF8ZFs0FAl9FJK4ACgkQHgFcFF8Z
Fs0O2xAAgxqCfAHylVuwunRppwV49Bvq6H0mMM29hYBogGB5cmh1vRnUm5GsPQt0
9vTKlwMz6XKjLs3TLqYsnZfXqK+lyaN0xFXd7xWCNzFtEXoIvDnq+u3h5WGaKOC9
PcXb2LSZoHC5yECBpoh58ZQEPKtYILEjo+OSDboIqHz4N5HSjMSPGPvMkUn6xMNG
roWTAWKPd9juyE2dPzZxIoBWwJGn3D8EMkeTQDlExTTvmnDPyPvJ5MVUY/xaHLgy
XV8lapFu/SzWAKotc5+9qkVN64obaxwovYTU9JnlqEc5+WlD+Jl+g0258Q1bV1H9
341aQQJX08iYw3xw13xVgT0zLPRbp82O3/SHC3S1nz27HUWKXqUtsm6woDbgHIz5
UPvKFQsp2dEN4tFXxkEHiossIVNGuXdRYwEjFQrxOwayCuS4cQwDADhqnzDU4hio
LSVhtxs9rgLps4iKpcaRAqK8kifTrsomlQfh/7axPJQ43pmBR2PiItetlBW/9Le6
KTH90ghLQzJwKFkIcFcvPhFMVqSyXI32+g5++YAPmNVy9M/7LdJxuEc9ifTWgwds
LtV3/F8xlqd0qwl5IbwC6Wf19N06jdlRv/q1zL/Hb6qu3FLQeGd+/1aiC0rsbq15
grdHVZkZi1iVF/zrOx24ctxQvgLyGHA+M7n/oIaIgxlT1S6+FUI=
=49ZC
-----END PGP SIGNATURE-----
Merge tag 'v1.19.1rc1' into develop
Synapse 1.19.1rc1 (2020-08-25)
==============================
Bugfixes
--------
- Fix a bug introduced in v1.19.0 where appservices with ratelimiting disabled would still be ratelimited when joining rooms. ([\#8139](https://github.com/matrix-org/synapse/issues/8139))
- Fix a bug introduced in v1.19.0 that would cause e.g. profile updates to fail due to incorrect application of rate limits on join requests. ([\#8153](https://github.com/matrix-org/synapse/issues/8153))
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
* Don't raise session_id errors on submit_token if request_token_inhibit_3pid_errors is set
* Changelog
* Also wait some time before responding to /requestToken
* Incorporate review
* Update synapse/storage/databases/main/registration.py
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
* Incorporate review
Co-authored-by: Andrew Morgan <1342360+anoadragon453@users.noreply.github.com>
Add new method ratelimiter.can_requester_do_action and ensure that appservices are exempt from being ratelimited.
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Erik Johnston <erik@matrix.org>
The function is used for two purposes: 1) for subscribers of streams to
get a token they can use to get further updates with, and 2) for
replication to track position of the writers of the stream.
For streams with a single writer the two scenarios produce the same
result, however the situation becomes complicated for streams with
multiple writers. The current `MultiWriterIdGenerator` does not
correctly handle the first case (which is not an issue as its only used
for the `caches` stream which nothing subscribes to outside of
replication).
`StatsHandler` handles updates to the `current_state_delta_stream`, and updates room stats such as the amount of state events, joined users, etc.
However, it counts every new join membership as a new user entering a room (and that user being in another room), whereas it's possible for a user's membership status to go from join -> join, for instance when they change their per-room profile information.
This PR adds a check for join->join membership transitions, and bails out early, as none of the further checks are necessary at that point.
Due to this bug, membership stats in many rooms have ended up being wildly larger than their true values. I am not sure if we also want to include a migration step which recalculates these statistics (possibly using the `_populate_stats_process_rooms` bg update).
Bug introduced in the initial implementation https://github.com/matrix-org/synapse/pull/4338.
Converts tests/rest/admin/test_room.py to have unix file endings after they were accidentally changed in #7613.
Keeping the same changelog as #7613 as it hasn't gone out in a release yet.
Erik Johnston