* change display names/avatar URLS to None if they contain null bytes
* add changelog
* add POC test, requested changes
* add a saner test and remove old one
* update test to verify that display name has been changed to None
* make test less fragile
The following scenarios would halt the user directory updater:
- user joins room
- user leaves room
- user present in room which switches from private to public, or vice versa.
for two classes of users:
- appservice senders
- users missing from the user table.
If this happened, the user directory would be stuck, unable to make forward progress.
Exclude both cases from the user directory, so that we ignore them.
Co-authored-by: Eric Eastwood <erice@element.io>
Co-authored-by: reivilibre <oliverw@matrix.org>
Co-authored-by: Sean Quah <8349537+squahtx@users.noreply.github.com>
Co-authored-by: Brendan Abolivier <babolivier@matrix.org>
This removes the magic allowing accessing configurable
variables directly from the config object. It is now required
that a specific configuration class is used (e.g. `config.foo`
must be replaced with `config.server.foo`).
Fix a long-standing bug where a batch of user directory changes would be
silently dropped if the server left a room early in the batch.
* Pull out `wait_for_background_update` in tests
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
There are two steps to rebuilding the user directory:
1. a scan over rooms, followed by
2. a scan over local users.
The former reads avatars and display names from the `room_memberships`
table and therefore contains potentially private avatars and
display names. The latter reads from the the `profiles` table which only
contains public data; moreover it will overwrite any private profiles
that the rooms scan may have written to the user directory. This means
that the rebuild could leak private user while the rebuild was in
progress, only to later cover up the leaks once the rebuild had completed.
This change skips over local users when writing user_directory rows
when scanning rooms. Doing so means that it'll take longer for a rebuild
to make local users searchable, which is unfortunate. I think a future
PR can improve this by swapping the order of the two steps above. (And
indeed there's more to do here, e.g. copying from `profiles` without
going via Python.)
Small tidy-ups while I'm here:
* Remove duplicated code from test_initial. This was meant to be pulled into `purge_and_rebuild_user_dir`.
* Move `is_public` before updating sharing tables. No functional change; it's still before the first read of `is_public`.
* Don't bother creating a set from dict keys. Slightly nicer and makes the code simpler.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse v1.40.0 where changing a user's display name or avatar in a restricted room would cause an authentication error. ([\#10933](https://github.com/matrix-org/synapse/issues/10933))
- Fix `/admin/whois/{user_id}` endpoint, which was broken in v1.44.0rc1. ([\#10968](https://github.com/matrix-org/synapse/issues/10968))
-----BEGIN PGP SIGNATURE-----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=HR3N
-----END PGP SIGNATURE-----
Merge tag 'v1.44.0rc3' into develop
Synapse 1.44.0rc3 (2021-10-04)
==============================
Bugfixes
--------
- Fix a bug introduced in Synapse v1.40.0 where changing a user's display name or avatar in a restricted room would cause an authentication error. ([\#10933](https://github.com/matrix-org/synapse/issues/10933))
- Fix `/admin/whois/{user_id}` endpoint, which was broken in v1.44.0rc1. ([\#10968](https://github.com/matrix-org/synapse/issues/10968))
* Introduce `should_include_local_users_in_dir`
We exclude three kinds of local users from the user_directory tables. At
present we don't consistently exclude all three in the same places. This
commit introduces a new function to gather those exclusion conditions
together. Because we have to handle local and remote users in different
ways, I've made that function only consider the case of remote users.
It's the caller's responsibility to make the local versus remote
distinction clear and correct.
A test fixup is required. The test now hits a path which makes db
queries against the users table. The expected rows were missing, because
we were using a dummy user that hadn't actually been registered.
We also add new test cases to covert the exclusion logic.
----
By my reading this makes these changes:
* When an app service user registers or changes their profile, they will
_not_ be added to the user directory. (Previously only support and
deactivated users were excluded). This is consistent with the logic that
rebuilds the user directory. See also [the discussion
here](https://github.com/matrix-org/synapse/pull/10914#discussion_r716859548).
* When rebuilding the directory, exclude support and disabled users from
room sharing tables. Previously only appservice users were excluded.
* Exclude all three categories of local users when rebuilding the
directory. Previously `_populate_user_directory_process_users` didn't do
any exclusion.
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
* Pull out GetUserDirectoryTables helper
* Don't rebuild the dir in tests that don't need it
In #10796 I changed registering a user to add directory entries under.
This means we don't have to force a directory regbuild in to tests of
the user directory search.
* Move test_initial to tests/storage
* Add type hints to both test_user_directory files
Co-authored-by: Richard van der Hoff <1389908+richvdh@users.noreply.github.com>
This avoids the overhead of searching through the various
configuration classes by directly referencing the class that
the attributes are in.
It also improves type hints since mypy can now resolve the
types of the configuration variables.
* add test to check if null code points are being inserted
* add logic to detect and replace null code points before insertion into db
* lints
* add license to test
* change approach to null substitution
* add type hint for SearchEntry
* Add changelog entry
Signed-off-by: H.Shay <shaysquared@gmail.com>
* updated changelog
* update chanelog message
* remove duplicate changelog
* Update synapse/storage/databases/main/events.py remove extra space
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
* rename and move test file, update tests, delete old test file
* fix typo in comments
* update _find_highlights_in_postgres to replace null byte with space
* replace null byte in sqlite search insertion
* beef up and reorganize test for this pr
* update changelog
* add type hints and update docstring
* check db engine directly vs using env variable
* refactor tests to be less repetetive
* move rplace logic into seperate function
* requested changes
* Fix typo.
* Update synapse/storage/databases/main/search.py
Co-authored-by: reivilibre <olivier@librepush.net>
* Update changelog.d/10820.misc
Co-authored-by: Aaron Raimist <aaron@raim.ist>
Co-authored-by: Patrick Cloke <clokep@users.noreply.github.com>
Co-authored-by: reivilibre <olivier@librepush.net>
Co-authored-by: Aaron Raimist <aaron@raim.ist>
Setting the value will help PostgreSQL free up memory by recycling
the connections in the connection pool.
Signed-off-by: Toni Spets <toni.spets@iki.fi>
Empirically, this helped my server considerably when handling gaps in Matrix HQ. The problem was that we would repeatedly call have_seen_events for the same set of (50K or so) auth_events, each of which would take many minutes to complete, even though it's only an index scan.
The hope here is that by moving all the schema files into synapse/storage/schema, it gets a bit easier for newcomers to navigate.
It certainly got easier for me to write a helpful README. There's more to do on that front, but I'll follow up with other PRs for that.
I went through and removed a bunch of cruft that was lying around for compatibility with old Python versions. This PR also will now prevent Synapse from starting unless you're running Python 3.6+.
Part of #9744
Removes all redundant `# -*- coding: utf-8 -*-` lines from files, as python 3 automatically reads source code as utf-8 now.
`Signed-off-by: Jonathan de Jong <jonathan@automatia.nl>`
Related: #8334
Deprecated in: #9429 - Synapse 1.28.0 (2021-02-25)
`GET /_synapse/admin/v1/users/<user_id>` has no
- unit tests
- documentation
API in v2 is available (#5925 - 12/2019, v1.7.0).
API is misleading. It expects `user_id` and returns a list of all users.
Signed-off-by: Dirk Klimpel dirk@klimpel.org
Unfortunately this doesn't test re-joining the room since
that requires having another homeserver to query over
federation, which isn't easily doable in unit tests.
Shay