Fixes#17823
While we're at it, makes a change where the redactions are sent as the
admin if the user is not a member of the server (otherwise these fail
with a "User must be our own" message).
Reset `sliding_sync_membership_snapshots` -> `forgotten` status when
membership changes (like rejoining a room).
Fix https://github.com/element-hq/synapse/issues/17781
### What was the problem before?
Previously, if someone used `/forget` on one of their rooms, it would
update `sliding_sync_membership_snapshots` as expected but when someone
rejoined the room (or had any membership change), the upsert didn't
overwrite and reset the `forgotten` status so it remained `forgotten`
and invisible down the Sliding Sync endpoint.
Fixes https://github.com/element-hq/synapse/issues/17698
This handles `required_state` changes by checking if new state has been
added to the config, and if so fetching and returning that from the
current state.
This also takes care to ensure that given a state entry S that is added,
removed and then re-added that we do *not* send S down a second time if
there have been no changes to S in the current state. This is fine for
Rust SDK (as it just remembers all state), but we might decide not to do
this behaviour in the MSC. If we decide to always send down S then its
easy enough to rip out all the code.
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
- better validation on user input
- fix an early task completion
- when checking membership in rooms, check for rooms user has been
banned from as well
The notifier is quite inefficient when it has to wake up many user
streams all at once
From a silly benchmark this takes the time to notify 1M user streams
from ~30s to ~5s
This is basically exactly the same logic as for receipts. Essentially we
just need to track which room account data we have and haven't sent down
to clients, and use that when we pull stuff out.
I think this just needs a couple of extra tests written
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Performance optimization: We can avoid fetching rooms that the user has
left themselves (which could be a significant amount), then only add
back rooms that the user has `newly_left` (left in the token range of an
incremental sync). It's a lot faster to fetch less rooms than fetch them
all and throw them away in most cases. Since the user only leaves a room
(or is state reset out) once in a blue moon, we can avoid a lot of work.
Based on @erikjohnston's branch, erikj/ss_perf
---------
Co-authored-by: Erik Johnston <erik@matrix.org>
No need to sort if the range is large enough to cover all of the rooms
in the list. Previously, we would only do this optimization if the range
was exactly large enough.
Follow-up to https://github.com/element-hq/synapse/pull/17672
This appears to be enough to make Element Web work (or at least move it
on to the next hurdle)
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Move filters tests to rest layer in order to test the new (with sliding
sync tables) and fallback paths that Sliding Sync can use.
Also found a bug in the new path because it's not being tested which is
also fixed in this PR. We now take into account `has_known_state` when
filtering.
Spawning from
https://github.com/element-hq/synapse/pull/17662#discussion_r1755574791.
This should have been done when we started using the new sliding sync
tables in https://github.com/element-hq/synapse/pull/17630
This PR changes `from pydantic import BaseModel` to `from
synapse._pydantic_compat import BaseModel` (as well as `constr`,
`conbytes`, `conint`, `confloat`).
It allows `check_pydantic_models.py` to mock those pydantic objects only
in the synapse module, and not interfere with pydantic objects in
external dependencies.
This should solve the CI problems for #17144, which breaks because
`check_pydantic_models.py` patches pydantic models from
[scim2-models](https://scim2-models.readthedocs.io/).
/cc @DMRobertson @gotmax23
fixes#17659
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
We need to bust the `get_sliding_sync_rooms_for_user`
cache when the room encryption is updated and any
other field that is used in the query.
Follow-up to https://github.com/element-hq/synapse/pull/17630
- Bust cache for membership change (cross-reference
`get_rooms_for_user`)
- Bust cache for room `encryption` (cross-reference
`get_room_encryption`)
- Bust cache for `forgotten` (cross-reference
`did_forget`/`get_forgotten_rooms_for_user`)
For rooms with a name we can skip fetching a full room summary, as we
don't need to calculate heroes, and instead just fetch the room counts
directly.
This also changes things to not return counts and heroes for non-joined
rooms. For left/banned rooms we were returning zero values anyway, and
for invite/knock rooms we don't really want to leak such information
(even if some of is included in the stripped state).
Speed up incremental sync by avoiding extra work. We first look at the
state delta changes and only fetch and calculate further derived things
if they have changed.
I thought ruff check would also format, but it doesn't.
This runs ruff format in CI and dev scripts. The first commit is just a
run of `ruff format .` in the root directory.
This will help mitigating any discrepancies between the issuer
configured and the one returned by the OIDC provider.
This also removes the need for configuring the `account_management_url`
explicitely, as it will now be loaded from the OIDC discovery, as per
MSC2965.
Because we may now fetch stuff for the .well-known/matrix/client
endpoint, this also transforms the client well-known resource to be
asynchronous.
Pre-populate room data for quick filtering/sorting in the Sliding Sync
API
Spawning from
https://github.com/element-hq/synapse/pull/17450#discussion_r1697335578
This PR is acting as the Synapse version `N+1` step in the gradual
migration being tracked by
https://github.com/element-hq/synapse/issues/17623
Adding two new database tables:
- `sliding_sync_joined_rooms`: A table for storing room meta data that
the local server is still participating in. The info here can be shared
across all `Membership.JOIN`. Keyed on `(room_id)` and updated when the
relevant room current state changes or a new event is sent in the room.
- `sliding_sync_membership_snapshots`: A table for storing a snapshot of
room meta data at the time of the local user's membership. Keyed on
`(room_id, user_id)` and only updated when a user's membership in a room
changes.
Also adds background updates to populate these tables with all of the
existing data.
We want to have the guarantee that if a row exists in the sliding sync
tables, we are able to rely on it (accurate data). And if a row doesn't
exist, we use a fallback to get the same info until the background
updates fill in the rows or a new event comes in triggering it to be
fully inserted. This means we need a couple extra things in place until
we bump `SCHEMA_COMPAT_VERSION` and run the foreground update in the
`N+2` part of the gradual migration. For context on why we can't rely on
the tables without these things see [1].
1. On start-up, block until we clear out any rows for the rooms that
have had events since the max-`stream_ordering` of the
`sliding_sync_joined_rooms` table (compare to max-`stream_ordering` of
the `events` table). For `sliding_sync_membership_snapshots`, we can
compare to the max-`stream_ordering` of `local_current_membership`
- This accounts for when someone downgrades their Synapse version and
then upgrades it again. This will ensure that we don't have any
stale/out-of-date data in the
`sliding_sync_joined_rooms`/`sliding_sync_membership_snapshots` tables
since any new events sent in rooms would have also needed to be written
to the sliding sync tables. For example a new event needs to bump
`event_stream_ordering` in `sliding_sync_joined_rooms` table or some
state in the room changing (like the room name). Or another example of
someone's membership changing in a room affecting
`sliding_sync_membership_snapshots`.
1. Add another background update that will catch-up with any rows that
were just deleted from the sliding sync tables (based on the activity in
the `events`/`local_current_membership`). The rooms that need
recalculating are added to the
`sliding_sync_joined_rooms_to_recalculate` table.
1. Making sure rows are fully inserted. Instead of partially inserting,
we need to check if the row already exists and fully insert all data if
not.
All of this extra functionality can be removed once the
`SCHEMA_COMPAT_VERSION` is bumped with support for the new sliding sync
tables so people can no longer downgrade (the `N+2` part of the gradual
migration).
<details>
<summary><sup>[1]</sup></summary>
For `sliding_sync_joined_rooms`, since we partially insert rows as state
comes in, we can't rely on the existence of the row for a given
`room_id`. We can't even rely on looking at whether the background
update has finished. There could still be partial rows from when someone
reverted their Synapse version after the background update finished, had
some state changes (or new rooms), then upgraded again and more state
changes happen leaving a partial row.
For `sliding_sync_membership_snapshots`, we insert items as a whole
except for the `forgotten` column ~~so we can rely on rows existing and
just need to always use a fallback for the `forgotten` data. We can't
use the `forgotten` column in the table for the same reasons above about
`sliding_sync_joined_rooms`.~~ We could have an out-of-date membership
from when someone reverted their Synapse version. (same problems as
outlined for `sliding_sync_joined_rooms` above)
Discussed in an [internal
meeting](https://docs.google.com/document/d/1MnuvPkaCkT_wviSQZ6YKBjiWciCBFMd-7hxyCO-OCbQ/edit#bookmark=id.dz5x6ef4mxz7)
</details>
### TODO
- [x] Update `stream_ordering`/`bump_stamp`
- [x] Handle remote invites
- [x] Handle state resets
- [x] Consider adding `sender` so we can filter `LEAVE` memberships and
distinguish from kicks.
- [x] We should add it to be able to tell leaves from kicks
- [x] Consider adding `tombstone` state to help address
https://github.com/element-hq/synapse/issues/17540
- [x] We should add it `tombstone_successor_room_id`
- [x] Consider adding `forgotten` status to avoid extra
lookup/table-join on `room_memberships`
- [x] We should add it
- [x] Background update to fill in values for all joined rooms and
non-join membership
- [x] Clean-up tables when room is deleted
- [ ] Make sure tables are useful to our use case
- First explored in
https://github.com/element-hq/synapse/compare/erikj/ss_use_new_tables
- Also explored in
76b5a576eb
- [x] Plan for how can we use this with a fallback
- See plan discussed above in main area of the issue description
- Discussed in an [internal
meeting](https://docs.google.com/document/d/1MnuvPkaCkT_wviSQZ6YKBjiWciCBFMd-7hxyCO-OCbQ/edit#bookmark=id.dz5x6ef4mxz7)
- [x] Plan for how we can rely on this new table without a fallback
- Synapse version `N+1`: (this PR) Bump `SCHEMA_VERSION` to `87`. Add
new tables and background update to backfill all rows. Since this is a
new table, we don't have to add any `NOT VALID` constraints and validate
them when the background update completes. Read from new tables with a
fallback in cases where the rows aren't filled in yet.
- Synapse version `N+2`: Bump `SCHEMA_VERSION` to `88` and bump
`SCHEMA_COMPAT_VERSION` to `87` because we don't want people to
downgrade and miss writes while they are on an older version. Add a
foreground update to finish off the backfill so we can read from new
tables without the fallback. Application code can now rely on the new
tables being populated.
- Discussed in an [internal
meeting](https://docs.google.com/document/d/1MnuvPkaCkT_wviSQZ6YKBjiWciCBFMd-7hxyCO-OCbQ/edit#bookmark=id.hh7shg4cxdhj)
### Dev notes
```
SYNAPSE_TEST_LOG_LEVEL=INFO poetry run trial tests.storage.test_events.SlidingSyncPrePopulatedTablesTestCase
SYNAPSE_POSTGRES=1 SYNAPSE_POSTGRES_USER=postgres SYNAPSE_TEST_LOG_LEVEL=INFO poetry run trial tests.storage.test_events.SlidingSyncPrePopulatedTablesTestCase
```
```
SYNAPSE_TEST_LOG_LEVEL=INFO poetry run trial tests.handlers.test_sliding_sync.FilterRoomsTestCase
```
Reference:
- [Development docs on background updates and worked examples of gradual
migrations
](1dfa59b238/docs/development/database_schema.md (background-updates))
- A real example of a gradual migration:
https://github.com/matrix-org/synapse/pull/15649#discussion_r1213779514
- Adding `rooms.creator` field that needed a background update to
backfill data, https://github.com/matrix-org/synapse/pull/10697
- Adding `rooms.room_version` that needed a background update to
backfill data, https://github.com/matrix-org/synapse/pull/6729
- Adding `room_stats_state.room_type` that needed a background update to
backfill data, https://github.com/matrix-org/synapse/pull/13031
- Tables from MSC2716: `insertion_events`, `insertion_event_edges`,
`insertion_event_extremities`, `batch_events`
- `current_state_events` updated in
`synapse/storage/databases/main/events.py`
---
```
persist_event (adds to queue)
_persist_event_batch
_persist_events_and_state_updates (assigns `stream_ordering` to events)
_persist_events_txn
_store_event_txn
_update_metadata_tables_txn
_store_room_members_txn
_update_current_state_txn
```
---
> Concatenated Indexes [...] (also known as multi-column, composite or
combined index)
>
> [...] key consists of multiple columns.
>
> We can take advantage of the fact that the first index column is
always usable for searching
>
> *--
https://use-the-index-luke.com/sql/where-clause/the-equals-operator/concatenated-keys*
---
Dealing with `portdb` (`synapse/_scripts/synapse_port_db.py`),
https://github.com/element-hq/synapse/pull/17512#discussion_r1725998219
---
<details>
<summary>SQL queries:</summary>
Both of these are equivalent and work in SQLite and Postgres
Options 1:
```sql
WITH data_table (room_id, user_id, membership_event_id, membership, event_stream_ordering, {", ".join(insert_keys)}) AS (
VALUES (
?, ?, ?,
(SELECT membership FROM room_memberships WHERE event_id = ?),
(SELECT stream_ordering FROM events WHERE event_id = ?),
{", ".join("?" for _ in insert_values)}
)
)
INSERT INTO sliding_sync_non_join_memberships
(room_id, user_id, membership_event_id, membership, event_stream_ordering, {", ".join(insert_keys)})
SELECT * FROM data_table
WHERE membership != ?
ON CONFLICT (room_id, user_id)
DO UPDATE SET
membership_event_id = EXCLUDED.membership_event_id,
membership = EXCLUDED.membership,
event_stream_ordering = EXCLUDED.event_stream_ordering,
{", ".join(f"{key} = EXCLUDED.{key}" for key in insert_keys)}
```
Option 2:
```sql
INSERT INTO sliding_sync_non_join_memberships
(room_id, user_id, membership_event_id, membership, event_stream_ordering, {", ".join(insert_keys)})
SELECT
column1 as room_id,
column2 as user_id,
column3 as membership_event_id,
column4 as membership,
column5 as event_stream_ordering,
{", ".join("column" + str(i) for i in range(6, 6 + len(insert_keys)))}
FROM (
VALUES (
?, ?, ?,
(SELECT membership FROM room_memberships WHERE event_id = ?),
(SELECT stream_ordering FROM events WHERE event_id = ?),
{", ".join("?" for _ in insert_values)}
)
) as v
WHERE membership != ?
ON CONFLICT (room_id, user_id)
DO UPDATE SET
membership_event_id = EXCLUDED.membership_event_id,
membership = EXCLUDED.membership,
event_stream_ordering = EXCLUDED.event_stream_ordering,
{", ".join(f"{key} = EXCLUDED.{key}" for key in insert_keys)}
```
If we don't need the `membership` condition, we could use:
```sql
INSERT INTO sliding_sync_non_join_memberships
(room_id, membership_event_id, user_id, membership, event_stream_ordering, {", ".join(insert_keys)})
VALUES (
?, ?, ?,
(SELECT membership FROM room_memberships WHERE event_id = ?),
(SELECT stream_ordering FROM events WHERE event_id = ?),
{", ".join("?" for _ in insert_values)}
)
ON CONFLICT (room_id, user_id)
DO UPDATE SET
membership_event_id = EXCLUDED.membership_event_id,
membership = EXCLUDED.membership,
event_stream_ordering = EXCLUDED.event_stream_ordering,
{", ".join(f"{key} = EXCLUDED.{key}" for key in insert_keys)}
```
</details>
### Pull Request Checklist
<!-- Please read
https://element-hq.github.io/synapse/latest/development/contributing_guide.html
before submitting your pull request -->
* [x] Pull request is based on the develop branch
* [x] Pull request includes a [changelog
file](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#changelog).
The entry should:
- Be a short description of your change which makes sense to users.
"Fixed a bug that prevented receiving messages from other servers."
instead of "Moved X method from `EventStore` to `EventWorkerStore`.".
- Use markdown where necessary, mostly for `code blocks`.
- End with either a period (.) or an exclamation mark (!).
- Start with a capital letter.
- Feel free to credit yourself, by adding a sentence "Contributed by
@github_username." or "Contributed by [Your Name]." to the end of the
entry.
* [x] [Code
style](https://element-hq.github.io/synapse/latest/code_style.html) is
correct
(run the
[linters](https://element-hq.github.io/synapse/latest/development/contributing_guide.html#run-the-linters))
---------
Co-authored-by: Erik Johnston <erik@matrix.org>
When returning receipts in sliding sync for initial rooms we should
always include our own receipts in the room (even if they don't match
any timeline events).
Reviewable commit-by-commit.
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
This supersedes #17503, given the per-connection state is being heavily
rewritten it felt easier to recreate the PR on top of that work.
This correctly handles the case of timeline limits going up and down.
This does not handle changes in `required_state`, but that can be done
as a separate PR.
Based on #17575.
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Previously, we just had very basic partial room exclusion based on
whether we were lazy-loading room members. Now with this PR, we added
`must_await_full_state(...)` with rules to check if we have a we're only
requesting `required_state` which is completely satisfied even with
partial state.
Partially-stated rooms should have all state events except for remote
membership events so if we require a remote membership event anywhere,
then we need to return `True`.
This triggers the client to start a new sliding sync connection. If we
don't do this and the client asks for the full range of rooms, we end up
sending down all rooms and their state from scratch (which can be very
slow)
This causes things like
https://github.com/element-hq/element-x-ios/issues/3115 after we restart
the server
---------
Co-authored-by: Eric Eastwood <eric.eastwood@beta.gouv.fr>
Poruri Sai Rahul